summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2017-10-13tipc: add ability to order and receive topology events in driverJon Maloy
As preparation for introducing communication groups, we add the ability to issue topology subscriptions and receive topology events from kernel space. This will make it possible for group member sockets to keep track of other group members. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-13mac80211: don't track HT capability changesJohannes Berg
The code here (more or less accidentally) tracks the HT capability of the AP when connected, and we found at least one AP that erroneously toggles its 20/40 capability bit when changing between 20/40 MHz. The connection to the AP is then broken because we set the 40 MHz disable flag based on this, as soon as it switches to 20 MHz, but because the flag then changed, we disconnect. I'd be inclined to just ignore this issue, since we then reconnect while the AP is in 20 MHz mode and never use 40 MHz with it again, but this code is a bit strange anyway - we don't use the capabilities for anything else. Change the code to simply not track the HT capabilities at all, which assumes that the AP at least sets 20/40 capability when operating in 40 MHz (or higher). If not, rate scaling might end up using only the narrower bandwidth. The new behaviour also mirrors what VHT does, where we only check the VHT operation. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-13cfg80211: fix CFG80211_EXTRA_REGDB_KEYDIR typoArnd Bergmann
The missing CONFIG_ prefix means this macro is never defined, leading to a possible Kbuild warning: net/wireless/reg.c:666:20: error: 'load_keys_from_buffer' defined but not used [-Werror=unused-function] static void __init load_keys_from_buffer(const u8 *p, unsigned int buflen) When we use the correct symbol, the warning also goes away. Fixes: 90a53e4432b1 ("cfg80211: implement regdb signature checking") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-13cfg80211: don't print log output for building shipped-certsArnd Bergmann
Building an allmodconfig kernel with 'make -s' now prints a single line: GEN net/wireless/shipped-certs.c Using '$(kecho)' here will skip the output with 'make -s' but otherwise keeps printing it, which is consistent with how we handle all the other output. Fixes: 90a53e4432b1 ("cfg80211: implement regdb signature checking") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-12ip: update policy routing config helpStephen Hemminger
The kernel config help for policy routing was still pointing at an ancient document from 2000 that refers to Linux 2.1. Update it to point to something that is at least occasionally updated. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12sched: act: ife: update parameters via rcu handlingAlexander Aring
This patch changes the parameter updating via RCU and not protected by a spinlock anymore. This reduce the time that the spinlock is being held. Signed-off-by: Alexander Aring <aring@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12sched: act: ife: migrate to use per-cpu countersAlexander Aring
This patch migrates the current counter handling which is protected by a spinlock to a per-cpu counter handling. This reduce the time where the spinlock is being held. Signed-off-by: Alexander Aring <aring@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12sched: act: ife: move encode/decode check to initAlexander Aring
This patch adds the check of the two possible ife handlings encode and decode to the init callback. The decode value is for usability aspect and used in userspace code only. The current code offers encode else decode only. This patch avoids any other option than this. Signed-off-by: Alexander Aring <aring@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12net sched actions: fix module auto-loadingRoman Mashak
Macro __stringify_1() can stringify a macro argument, however IFE_META_* are enums, so they never expand, however request_module expects an integer in IFE module name, so as a result it always fails to auto-load. Fixes: ef6980b6becb ("introduce IFE action") Signed-off-by: Roman Mashak <mrv@mojatatu.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12net sched actions: change IFE modules alias namesRoman Mashak
Make style of module alias name consistent with other subsystems in kernel, for example net devices. Fixes: 084e2f6566d2 ("Support to encoding decoding skb mark on IFE action") Fixes: 200e10f46936 ("Support to encoding decoding skb prio on IFE action") Fixes: 408fbc22ef1e ("net sched ife action: Introduce skb tcindex metadata encap decap") Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12ip_tunnel: fix building with NET_IP_TUNNEL=mArnd Bergmann
When af_mpls is built-in but the tunnel support is a module, we get a link failure: net/mpls/af_mpls.o: In function `mpls_init': af_mpls.c:(.init.text+0xdc): undefined reference to `ip_tunnel_encap_add_ops' This adds a Kconfig statement to prevent the broken configuration and force mpls to be a module as well in this case. Fixes: bdc476413dcd ("ip_tunnel: add mpls over gre support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Amine Kherbouche <amine.kherbouche@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12net/smc: dev_put for netdev after usage of ib_query_gid()Ursula Braun
For RoCEs ib_query_gid() takes a reference count on the net_device. This reference count must be decreased by the caller. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Reported-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Fixes: 0cfdd8f92cac ("smc: connection and link group creation") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12net/smc: replace function pointer get_netdev()Ursula Braun
SMC should not open code the function pointer get_netdev of the IB device. Replacing ib_query_gid(..., NULL) with ib_query_gid(..., gid_attr) allows access to the netdev. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Suggested-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12net: dsa: tag_brcm: Indicate to master netdevice port + queueFlorian Fainelli
We need to tell the DSA master network device doing the actual transmission what the desired switch port and queue number is for it to resolve that to the internal transmit queue it is mapped to. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12net: dsa: Add support for DSA specific notifiersFlorian Fainelli
In preparation for communicating a given DSA network device's port number and switch index, create a specialized DSA notifier and two events: DSA_PORT_REGISTER and DSA_PORT_UNREGISTER that communicate: the slave network device (slave_dev), port number and switch number in the tree. This will be later used for network device drivers like bcmsysport which needs to cooperate with its DSA network devices to set-up queue mapping and scheduling. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-12batman-adv: Add missing kerneldoc for extackSven Eckelmann
The parameter extack was added to batadv_softif_slave_add without adding the kernel-doc for it. This caused kernel-doc warnings. Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-10-12cfg80211: remove set but never used variable cf_offsetJohannes Berg
Perhaps it had been intended to be used, but it clearly isn't. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-11net: mpls: make function ipgre_mpls_encap_hlen staticColin Ian King
The function ipgre_mpls_encap_hlen is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'ipgre_mpls_encap_hlen' was not declared. Should it be static? Fixes: bdc476413dcdb ("ip_tunnel: add mpls over gre support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11sctp: make array sctp_sched_ops staticColin Ian King
The array sctp_sched_ops is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: symbol 'sctp_sched_ops' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11ipv6: addrconf: don't use rtnl mutex in RTM_GETADDRFlorian Westphal
Similar to the previous patch, use the device lookup functions that bump device refcount and flag this as DOIT_UNLOCKED to avoid rtnl mutex. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11ipv6: addrconf: don't use rtnl mutex in RTM_GETNETCONFFlorian Westphal
Instead of relying on rtnl mutex bump device reference count. After this change, values reported can change in parallel, but thats not much different from current state, as anyone can change the settings right after rtnl_unlock (and before userspace processed reply). While at it, switch to GFP_KERNEL allocation. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: sched: remove unused tcf_exts_get_dev helper and cls_flower->egress_devJiri Pirko
The helper and the struct field ares no longer used by any code, so remove them. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: sched: convert cls_flower->egress_dev users to tc_setup_cb_egdev infraJiri Pirko
The only user of cls_flower->egress_dev is mlx5. So do the conversion there alongside with the code originating the call in cls_flower function fl_hw_replace_filter to the newly introduced egress device callback infrastucture. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: sched: introduce per-egress action device callbacksJiri Pirko
Introduce infrastructure that allows drivers to register callbacks that are called whenever tc would offload inserted rule and specified device acts as tc action egress device. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: sched: make tc_action_ops->get_dev return dev and avoid passing netJiri Pirko
Return dev directly, NULL if not possible. That is enough. Makes no sense to pass struct net * to get_dev op, as there is only one net possible, the one the action was created in. So just store it in mirred priv and use directly. Rename the mirred op callback function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net/ncsi: Don't limit vids based on hot_channelSamuel Mendoza-Jonas
Currently we drop any new VLAN ids if there are more than the current (or last used) channel can support. Most importantly this is a problem if no channel has been selected yet, resulting in a segfault. Secondly this does not necessarily reflect the capabilities of any other channels. Instead only drop a new VLAN id if we are already tracking the maximum allowed by the NCSI specification. Per-channel limits are already handled by ncsi_add_filter(), but add a message to set_one_vid() to make it obvious that the channel can not support any more VLAN ids. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: qrtr: Support decoding incoming v2 packetsBjorn Andersson
Add the necessary logic for decoding incoming messages of version 2 as well. Also make sure there's room for the bigger of version 1 and 2 headers in the code allocating skbs for outgoing messages. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: qrtr: Use sk_buff->cb in receive pathBjorn Andersson
Rather than parsing the header of incoming messages throughout the implementation do it once when we retrieve the message and store the relevant information in the "cb" member of the sk_buff. This allows us to, in a later commit, decode version 2 messages into this same structure. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: qrtr: Clean up control packet handlingBjorn Andersson
As the message header generation is deferred the internal functions for generating control packets can be simplified. This patch modifies qrtr_alloc_ctrl_packet() to, in addition to the sk_buff, return a reference to a struct qrtr_ctrl_pkt, which clarifies and simplifies the helpers to the point that these functions can be folded back into the callers. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: qrtr: Pass source and destination to enqueue functionsBjorn Andersson
Defer writing the message header to the skb until its time to enqueue the packet. As the receive path is reworked to decode the message header as it's received from the transport and only pass around the payload in the skb this change means that we do not have to fill out the full message header just to decode it immediately in qrtr_local_enqueue(). In the future this change also makes it possible to prepend message headers based on the version of each link. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: qrtr: Add control packet definition to uapiBjorn Andersson
The QMUX protocol specification defines structure of the special control packet messages being sent between handlers of the control port. Add these to the uapi header, as this structure and the associated types are shared between the kernel and all userspace handlers of control messages. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: qrtr: Move constants to header fileBjorn Andersson
The constants are used by both the name server and clients, so clarify their value and move them to the uapi header. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11net: qrtr: Invoke sk_error_report() after setting sk_errBjorn Andersson
Rather than manually waking up any context sleeping on the sock to signal an error we should call sk_error_report(). This has the added benefit that in-kernel consumers can override this notification with its own callback. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11Merge tag 'mac80211-next-for-davem-2017-10-11' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Work continues in various areas: * port authorized event for 4-way-HS offload (Avi) * enable MFP optional for such devices (Emmanuel) * Kees's timer setup patch for mac80211 mesh (the part that isn't trivially scripted) * improve VLAN vs. TXQ handling (myself) * load regulatory database as firmware file (myself) * with various other small improvements and cleanups I merged net-next once in the meantime to allow Kees's timer setup patch to go in. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-11mac80211: use crypto_aead_authsize()Johannes Berg
Evidently this API is intended to be used to isolate against API changes, so use it instead of accessing ->authsize. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-11cfg80211: implement regdb signature checkingJohannes Berg
Currently CRDA implements the signature checking, and the previous commits added the ability to load the whole regulatory database into the kernel. However, we really can't lose the signature checking, so implement it in the kernel by loading a detached signature (regulatory.db.p7s) and check it against built-in keys. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-11cfg80211: reg: remove support for built-in regdbJohannes Berg
Parsing and building C structures from a regdb is no longer needed since the "firmware" file (regulatory.db) can be linked into the kernel image to achieve the same effect. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-11cfg80211: support reloading regulatory databaseJohannes Berg
If the regulatory database is loaded, and then updated, it may be necessary to reload it. Add an nl80211 command to do this. Note that this just reloads the database, it doesn't re-apply the rules from it immediately. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-11cfg80211: support loading regulatory database as firmware fileJohannes Berg
As the current regulatory database is only about 4k big, and already difficult to extend, we decided that overall it would be better to get rid of the complications with CRDA and load the database into the kernel directly, but in a new format that is extensible. The new file format can be extended since it carries a length field on all the structs that need to be extensible. In order to be able to request firmware when the module initializes, move cfg80211 from subsys_initcall() to the later fs_initcall(); the firmware loader is at the same level but linked earlier, so it can be called from there. Otherwise, when both the firmware loader and cfg80211 are built-in, the request will crash the kernel. We also need to be before device_initcall() so that cfg80211 is available for devices when they initialize. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-11mac80211: only remove AP VLAN frames from TXQJohannes Berg
When removing an AP VLAN interface, mac80211 currently purges the entire TXQ for the AP interface. Fix this by using the FQ API introduced in the previous patch to filter frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-11mac80211: aead api to reduce redundancyXiang Gao
Currently, the aes_ccm.c and aes_gcm.c are almost line by line copy of each other. This patch reduce code redundancy by moving the code in these two files to crypto/aead_api.c to make it a higher level aead api. The file aes_ccm.c and aes_gcm.c are removed and all the functions there are now implemented in their headers using the newly added aead api. Signed-off-by: Xiang Gao <qasdfgtyuiop@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-10-10net: call cgroup_sk_alloc() earlier in sk_clone_lock()Eric Dumazet
If for some reason, the newly allocated child need to be freed, we will call cgroup_put() (via sk_free_unlock_clone()) while the corresponding cgroup_get() was not yet done, and we will free memory too soon. Fixes: d979a39d7242 ("cgroup: duplicate cgroup reference when cloning sockets") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-10Revert "net: defer call to cgroup_sk_alloc()"Eric Dumazet
This reverts commit fbb1fb4ad415cb31ce944f65a5ca700aaf73a227. This was not the proper fix, lets cleanly revert it, so that following patch can be carried to stable versions. sock_cgroup_ptr() callers do not expect a NULL return value. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-10openvswitch: add ct_clear actionEric Garver
This adds a ct_clear action for clearing conntrack state. ct_clear is currently implemented in OVS userspace, but is not backed by an action in the kernel datapath. This is useful for flows that may modify a packet tuple after a ct lookup has already occurred. Signed-off-by: Eric Garver <e@erig.me> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-10net: dst: move cpu inside ifdef to avoid compilation warningJakub Kicinski
If CONFIG_DST_CACHE is not selected cpu variable will be unused and we will see a compilation warning. Move it under the ifdef. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: d66f2b91f95b ("bpf: don't rely on the verifier lock for metadata_dst allocation") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-10rtnetlink: bridge: use ext_ack instead of printkFlorian Westphal
We can now piggyback error strings to userspace via extended acks rather than using printk. Before: bridge fdb add 01:02:03:04:05:06 dev br0 vlan 4095 RTNETLINK answers: Invalid argument After: bridge fdb add 01:02:03:04:05:06 dev br0 vlan 4095 Error: invalid vlan id. v3: drop 'RTM_' prefixes, suggested by David Ahern, they are not useful, the add/del in bridge command line is enough. Also reword error in response to malformed/bad vlan id attribute size. Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-10net/core: Fix BUG to BUG_ON conditionals.Tim Hansen
Fix BUG() calls to use BUG_ON(conditional) macros. This was found using make coccicheck M=net/core on linux next tag next-2017092 Signed-off-by: Tim Hansen <devtimhansen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-10bpf: don't rely on the verifier lock for metadata_dst allocationJakub Kicinski
bpf_skb_set_tunnel_*() functions require allocation of per-cpu metadata_dst. The allocation happens upon verification of the first program using those helpers. In preparation for removing the verifier lock, use cmpxchg() to make sure we only allocate the metadata_dsts once. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-10ipv6: fix incorrect bitwise operator used on rt6i_flagsColin Ian King
The use of the | operator always leads to true which looks rather suspect to me. Fix this by using & instead to just check the RTF_CACHE entry bit. Detected by CoverityScan, CID#1457734, #1457747 ("Wrong operator used") Fixes: 35732d01fe31 ("ipv6: introduce a hash table to store dst cache") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-10ipv6: fix dereference of rt6_ex before null check errorColin Ian King
Currently rt6_ex is being dereferenced before it is null checked hence there is a possible null dereference bug. Fix this by only dereferencing rt6_ex after it has been null checked. Detected by CoverityScan, CID#1457749 ("Dereference before null check") Fixes: 81eb8447daae ("ipv6: take care of rt6_stats") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-23 11:30:44 +0000