summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2011-02-28Bluetooth: Fix BT_L2CAP and BT_SCO in KconfigGustavo F. Padovan
If we want something "bool" built-in in something "tristate" it can't "depend on" the tristate config option. Report by DaveM: I give it 'y' just to make it happen, for both, and afterways no matter how many times I rerun "make oldconfig" I keep seeing things like this in my build: scripts/kconfig/conf --silentoldconfig Kconfig include/config/auto.conf:986:warning: symbol value 'm' invalid for BT_SCO include/config/auto.conf:3156:warning: symbol value 'm' invalid for BT_L2CAP Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-28net: Forgot to commit net/core/dev.c part of Jiri's ->rx_handler patch.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-28netfilter: nf_ct_tcp: fix out of sync scenario while in SYN_RECVPablo Neira Ayuso
This patch fixes the out of sync scenarios while in SYN_RECV state. Quoting Jozsef, what it happens if we are out of sync if the following: > > b. conntrack entry is outdated, new SYN received > > - (b1) we ignore it but save the initialization data from it > > - (b2) when the reply SYN/ACK receives and it matches the saved data, > > we pick up the new connection This is what it should happen if we are in SYN_RECV state. Initially, the SYN packet hits b1, thus we save data from it. But the SYN/ACK packet is considered a retransmission given that we're in SYN_RECV state. Therefore, we never hit b2 and we don't get in sync. To fix this, we ignore SYN/ACK if we are in SYN_RECV. If the previous packet was a SYN, then we enter the ignore case that get us in sync. This patch helps a lot to conntrackd in stress scenarios (assumming a client that generates lots of small TCP connections). During the failover, consider that the new primary has injected one outdated flow in SYN_RECV state (this is likely to happen if the conntrack event rate is high because the backup will be a bit delayed from the primary). With the current code, if the client starts a new fresh connection that matches the tuple, the SYN packet will be ignored without updating the state tracking, and the SYN+ACK in reply will blocked as it will not pass checkings III or IV (since all state tracking in the original direction is not initialized because of the SYN packet was ignored and the ignore case that get us in sync is not applied). I posted a couple of patches before this one. Changli Gao spotted a simpler way to fix this problem. This patch implements his idea. Cc: Changli Gao <xiaosuo@gmail.com> Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-02-27xfrm: Pass const xfrm_address_t objects to xfrm_state_lookup* and xfrm_find_acq.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-27xfrm: Pass name as const to xfrm_*_get_byname().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-27bond: service netpoll arp queue on master deviceAmerigo Wang
Neil pointed out that we can't send ARP reply on behalf of slaves, we need to move the arp queue to their bond device. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-27netpoll: remove IFF_IN_NETPOLL flagAmerigo Wang
V4: rebase to net-next-2.6 This patch removes the flag IFF_IN_NETPOLL, we don't need it any more since we have netpoll_tx_running() now. Signed-off-by: WANG Cong <amwang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-27Bluetooth: Use ERR_PTR as return error from hci_connectVille Tervo
Use ERR_PTR mechanism to return error from hci_connect. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-27Bluetooth: Validate data size before accessing mgmt commandsSzymon Janc
Crafted (too small) data buffer could result in reading data outside of buffer. Validate buffer size and return EINVAL if size is wrong. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Acked-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-27Bluetooth: Move index to common header in management interfaceSzymon Janc
Most mgmt commands and event are related to hci adapter. Moving index to common header allow to easily use it in command status while reporting errors. For those not related to adapter use MGMT_INDEX_NONE (0xFFFF) as index. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Acked-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-27Bluetooth: Use proper command structure in remove_uuidSzymon Janc
The structure used for command was wrong (probably copy-paste mistake). Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Acked-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-25pfkey: Use const where possible.David S. Miller
This actually pointed out a (seemingly known) bug where we mangle the pfkey header in a potentially shared SKB, which is fixed here. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25Bluetooth: Remove duplicated BT_INFO() from L2CAPGustavo F. Padovan
The message for the initialization of the L2CAP layer was being printed twice. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-25Bluetooth: remove unnecessary call to hci_sock_cleanupAnand Gadiyar
hci_sock_cleanup is already called after the sock_err label. It appears that we can drop this call. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-25sched: protocol only needed when CONFIG_NET_CLS_ACT is enabledHagen Paul Pfeifer
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25ipv6: ignore rtnl_unicast() return codeHagen Paul Pfeifer
rtnl_unicast() return value is not of interest, we can silently ignore it, save some instructions and four byte on the stack. Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25ipv6: variable next is never used in this functionHagen Paul Pfeifer
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25ipv6: hash is calculated but not used afterwardsHagen Paul Pfeifer
hash is declared and assigned but not used anymore. ipv6_addr_hash() exhibit no side-effects. Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25ipv6: totlen is declared and assigned but not usedHagen Paul Pfeifer
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25dccp: newdp is declared/assigned but never be usedHagen Paul Pfeifer
Declaration and assignment of newdp is removed. Usage of dccp_sk() exhibit no side effects. Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25net: handle addr_type of 0 properlyHagen Paul Pfeifer
addr_type of 0 means that the type should be adopted from from_dev and not from __hw_addr_del_multiple(). Unfortunately it isn't so and addr_type will always be considered. Fix this by implementing the considered and documented behavior. Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25mac80211: support direct offchannel TX offloadJohannes Berg
For devices supported by iwlwifi sometimes off-channel transmissions need to be handled by the device completely. To support this mac80211 needs to pass the frame directly to the driver and not through the TX path as the driver needs the frame and channel information at the same time. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: better fix for conn_mon_timer running after disassociateStanislaw Gruszka
Is still possible to schedule conn_mon_timer after disassociate from ieee80211_sta_tx_notify() and ieee80211_offchannel_ps_disable(). Move disassociate check to ieee80211_sta_reset_conn_monitor() to cover all these cases, and add unlikely since in most the time we call ieee80211_sta_reset_conn_monitor() when associated. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: copy peer MCS TX parametersJohannes Berg
We need to copy this to allow drivers to look at the information where needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: remove IBSS merge delayJohannes Berg
This reverts 4a332a38 ("mac80211: Give it some time to do the TSF sync"). There's no point in waiting with a new IBSS merge just because the hardware hasn't merged up with the old IBSS yet, and since 34e8f082 we no longer attempt to merge with the IBSS we're already in. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25mac80211: make tx() operation return voidJohannes Berg
The return value of the tx operation is commonly misused by drivers, leading to errors. All drivers will drop frames if they fail to TX the frame, and they must also properly manage the queues (if they didn't, mac80211 would already warn). Removing the ability for drivers to return a BUSY value also allows significant cleanups of the TX TX handling code in mac80211. Note that this also fixes a bug in ath9k_htc, the old "return -1" there was wrong. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Tested-by: Sedat Dilek <sedat.dilek@googlemail.com> [ath5k] Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> [rt2x00] Acked-by: Larry Finger <Larry.Finger@lwfinger.net> [b43, rtl8187, rtlwifi] Acked-by: Luciano Coelho <coelho@ti.com> [wl12xx] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-25phonet: Protect pipe_do_remove() with appropriate ifdefs.David S. Miller
It is only used when CONFIG_PHONET_PIPECTRLR is not set. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25Phonet: fix flawed "SYN/ACK" logicRémi Denis-Courmont
* Do not fail if the peer supports more or less than 3 algorithms. * Ignore unknown congestion control algorithms instead of failing. * Simplify congestion algorithm negotiation (largest is best). * Do not use a static buffer. * Fix off-by-two read overflow. * Avoid extra memory copy (in addition to skb_copy_bits()). The previous code really made no sense. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25Phonet: don't bother with transaction IDs (especially for indications)Rémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25Phonet: remove redumdant pep->pipe_stateRémi Denis-Courmont
sk->sk_state already contains the pipe state. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25Phonet: use socket destination in pipe protocolRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25Phonet: implement per-socket destination/peer addressRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25Phonet: allow multiple listen() and fix small race conditionRémi Denis-Courmont
Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25RxRPC: Allocate tokens with kzalloc to avoid oops in rxrpc_destroyAnton Blanchard
With slab poisoning enabled, I see the following oops: Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6b73 ... NIP [c0000000006bc61c] .rxrpc_destroy+0x44/0x104 LR [c0000000006bc618] .rxrpc_destroy+0x40/0x104 Call Trace: [c0000000feb2bc00] [c0000000006bc618] .rxrpc_destroy+0x40/0x104 (unreliable) [c0000000feb2bc90] [c000000000349b2c] .key_cleanup+0x1a8/0x20c [c0000000feb2bd40] [c0000000000a2920] .process_one_work+0x2f4/0x4d0 [c0000000feb2be00] [c0000000000a2d50] .worker_thread+0x254/0x468 [c0000000feb2bec0] [c0000000000a868c] .kthread+0xbc/0xc8 [c0000000feb2bf90] [c000000000020e00] .kernel_thread+0x54/0x70 We aren't initialising token->next, but the code in destroy_context relies on the list being NULL terminated. Use kzalloc to zero out all the fields. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-25sysctl: ipv6: use correct net in ipv6_sysctl_rtcache_flushLucian Adrian Grijincu
Before this patch issuing these commands: fd = open("/proc/sys/net/ipv6/route/flush") unshare(CLONE_NEWNET) write(fd, "stuff") would flush the newly created net, not the original one. The equivalent ipv4 code is correct (stores the net inside ->extra1). Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24sch_netem: Need to include vmalloc.hDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2011-02-24sch_choke: add choke_skb_cbEric Dumazet
Better document choke skb->cb[] use, like we did in netem and sfb This adds a compile time check to make sure we dont exhaust skb->cb[] space. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24netem: update version and cleanupstephen hemminger
Get rid of debug message that are not useful, and enable the log messages in case of error. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24netem: revised correlated loss generatorstephen hemminger
This is a patch originated with Stefano Salsano and Fabio Ludovici. It provides several alternative loss models for use with netem. This patch adds two state machine based loss models. See: http://netgroup.uniroma2.it/twiki/bin/view.cgi/Main/NetemCLG Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24Revert "sch_netem: Remove classful functionality"stephen hemminger
Many users have wanted the old functionality that was lost to be able to use pfifo as inner qdisc for netem. The reason that netem could not be classful with the older API was because of the limitations of the old dequeue/requeue interface; now that qdisc API has a peek function, there is no longer a problem with using any inner qdisc's. This reverts commit 02201464119334690fe209849843881b8e9cfa9f. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24netem: define NETEM_DIST_MAXstephen hemminger
Rather than magic constant in code, expose the maximum size of packet distribution table in API. In iproute2, q_netem defines MAX_DIST as 16K already. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24netem: use vmalloc for distribution tablestephen hemminger
The netem probability table can be large (up to 64K bytes) which may be too large to allocate in one contiguous chunk. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24netem: cleanup dump codestephen hemminger
Use nla_put_nested to update netlink attribute value. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-25ipvs: unify the formula to estimate the overhead of processing connectionsChangli Gao
lc and wlc use the same formula, but lblc and lblcr use another one. There is no reason for using two different formulas for the lc variants. The formula used by lc is used by all the lc variants in this patch. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Acked-by: Wensong Zhang <wensong@linux-vs.org> Signed-off-by: Simon Horman <horms@verge.net.au>
2011-02-24ipv4: Rearrange how ip_route_newports() gets port keys.David S. Miller
ip_route_newports() is the only place in the entire kernel that cares about the port members in the routing cache entry's lookup flow key. Therefore the only reason we store an entire flow inside of the struct rtentry is for this one special case. Rewrite ip_route_newports() such that: 1) The caller passes in the original port values, so we don't need to use the rth->fl.fl_ip_{s,d}port values to remember them. 2) The lookup flow is constructed by hand instead of being copied from the routing cache entry's flow. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-24Merge 2.6.38-rc6 into tty-nextGreg Kroah-Hartman
This was to resolve a merge issue with drivers/char/Makefile and drivers/tty/serial/68328serial.c Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-23xfrm: Const'ify xfrm_address_t args to xfrm_state_find.David S. Miller
This required a const'ification in xfrm_init_tempstate() too. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Remove unused 'saddr' and 'daddr' args to xfrm_state_look_at.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-23xfrm: Const'ify xfrm_address_t args to __xfrm_state_lookup{,_byaddr}.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-14 17:17:58 +0000