summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2016-11-01tipc: remove tsk->connected from tipc_sockParthasarathy Bhuvaragan
Until now, we determine if a socket is connected or not based on tsk->connected, which is set once when the probing state is set to TIPC_CONN_OK. It is unset when the sock->state is updated from SS_CONNECTED to any other state. In this commit, we remove connected variable from tipc_sock and derive socket connection status from the following condition: sock->state == SS_CONNECTED => tsk->connected There is no functional change in this commit. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01tipc: remove tsk->connected for connectionless socketsParthasarathy Bhuvaragan
Until now, for connectionless sockets the peer information during connect is stored in tsk->peer and a connection state is set in tsk->connected. This is redundant. In this commit, for connectionless sockets we update: - __tipc_sendmsg(), when the destination is NULL the peer existence is determined by tsk->peer.family, instead of tsk->connected. - tipc_connect(), remove set/unset of tsk->connected. Hence tsk->connected is no longer used for connectionless sockets. There is no functional change in this commit. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01tipc: rename tsk->remote to tsk->peer for consistent namingParthasarathy Bhuvaragan
Until now, the peer information for connect is stored in tsk->remote but the rest of code uses the name peer for peer/remote. In this commit, we rename tsk->remote to tsk->peer to align with naming convention followed in the rest of the code. There is no functional change in this commit. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01tipc: rename struct tipc_skb_cb member handle to bytes_readParthasarathy Bhuvaragan
In this commit, we rename handle to bytes_read indicating the purpose of the member. Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01tipc: set kern=0 in sk_alloc() during tipc_accept()Parthasarathy Bhuvaragan
Until now, tipc_accept() calls sk_alloc() with kern=1. This is incorrect as the data socket's owner is the user application. Thus for these accepted data sockets the network namespace refcount is skipped. In this commit, we fix this by setting kern=0. Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01tipc: wakeup sleeping users at disconnectParthasarathy Bhuvaragan
Until now, in filter_connect() when we terminate a connection due to an error message from peer, we set the socket state to DISCONNECTING. The socket is notified about this broken connection using EPIPE when a user tries to send a message. However if a socket was waiting on a poll() while the connection is being terminated, we fail to wakeup that socket. In this commit, we wakeup sleeping sockets at connection termination. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01tipc: return early for non-blocking sockets at link congestionParthasarathy Bhuvaragan
Until now, in stream/mcast send() we pass the message to the link layer even when the link is congested and add the socket to the link's wakeup queue. This is unnecessary for non-blocking sockets. If a socket is set to non-blocking and sends multicast with zero back off time while receiving EAGAIN, we exhaust the memory. In this commit, we return immediately at stream/mcast send() for non-blocking sockets. Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31Merge tag 'linux-can-fixes-for-4.9-20161031' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-10-31 this is a pull request of two patches for the upcoming v4.9 release. The first patch is by Lukas Resch for the sja1000 plx_pci driver that adds support for Moxa CAN devices. The second patch is by Oliver Hartkopp and fixes a potential kernel panic in the CAN broadcast manager. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31sctp: hold transport instead of assoc when lookup assoc in rx pathXin Long
Prior to this patch, in rx path, before calling lock_sock, it needed to hold assoc when got it by __sctp_lookup_association, in case other place would free/put assoc. But in __sctp_lookup_association, it lookup and hold transport, then got assoc by transport->assoc, then hold assoc and put transport. It means it didn't hold transport, yet it was returned and later on directly assigned to chunk->transport. Without the protection of sock lock, the transport may be freed/put by other places, which would cause a use-after-free issue. This patch is to fix this issue by holding transport instead of assoc. As holding transport can make sure to access assoc is also safe, and actually it looks up assoc by searching transport rhashtable, to hold transport here makes more sense. Note that the function will be renamed later on on another patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31sctp: return back transport in __sctp_rcv_init_lookupXin Long
Prior to this patch, it used a local variable to save the transport that is looked up by __sctp_lookup_association(), and didn't return it back. But in sctp_rcv, it is used to initialize chunk->transport. So when hitting this, even if it found the transport, it was still initializing chunk->transport with null instead. This patch is to return the transport back through transport pointer that is from __sctp_rcv_lookup_harder(). Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31sctp: hold transport instead of assoc in sctp_diagXin Long
In sctp_transport_lookup_process(), Commit 1cceda784980 ("sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock") moved cb() out of rcu lock, but it put transport and hold assoc instead, and ignore that cb() still uses transport. It may cause a use-after-free issue. This patch is to hold transport instead of assoc there. Fixes: 1cceda784980 ("sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31bridge: mcast: add router port on PIM hello messageNikolay Aleksandrov
When we receive a PIM Hello message on a port we can consider that it has a multicast router attached, thus it is correct to add it to the router list. The only catch is it shouldn't be considered for a querier. Using Daniel's description: leaf-11 leaf-12 leaf-13 \ | / bridge-1 / \ host-11 host-12 - all ports in bridge-1 are in a single vlan aware bridge - leaf-11 is the IGMP querier - leaf-13 is the PIM DR - host-11 TXes packets to 226.10.10.10 - bridge-1 only forwards the 226.10.10.10 traffic out the port to leaf-11, it should also forward this traffic out the port to leaf-13 Suggested-by: Daniel Walton <dwalton@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31net: pim: add all RFC7761 message typesNikolay Aleksandrov
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31can: bcm: fix warning in bcm_connect/proc_registerOliver Hartkopp
Andrey Konovalov reported an issue with proc_register in bcm.c. As suggested by Cong Wang this patch adds a lock_sock() protection and a check for unsuccessful proc_create_data() in bcm_connect(). Reference: http://marc.info/?l=linux-netdev&m=147732648731237 Reported-by: Andrey Konovalov <andreyknvl@google.com> Suggested-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-10-31net: mangle zero checksum in skb_checksum_help()Eric Dumazet
Sending zero checksum is ok for TCP, but not for UDP. UDPv6 receiver should by default drop a frame with a 0 checksum, and UDPv4 would not verify the checksum and might accept a corrupted packet. Simply replace such checksum by 0xffff, regardless of transport. This error was caught on SIT tunnels, but seems generic. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31net: clear sk_err_soft in sk_clone_lock()Eric Dumazet
At accept() time, it is possible the parent has a non zero sk_err_soft, leftover from a prior error. Make sure we do not leave this value in the child, as it makes future getsockopt(SO_ERROR) calls quite unreliable. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31dctcp: avoid bogus doubling of cwnd after lossFlorian Westphal
If a congestion control module doesn't provide .undo_cwnd function, tcp_undo_cwnd_reduction() will set cwnd to tp->snd_cwnd = max(tp->snd_cwnd, tp->snd_ssthresh << 1); ... which makes sense for reno (it sets ssthresh to half the current cwnd), but it makes no sense for dctcp, which sets ssthresh based on the current congestion estimate. This can cause severe growth of cwnd (eventually overflowing u32). Fix this by saving last cwnd on loss and restore cwnd based on that, similar to cubic and other algorithms. Fixes: e3118e8359bb7c ("net: tcp: add DCTCP congestion control algorithm") Cc: Lawrence Brakmo <brakmo@fb.com> Cc: Andrew Shewmaker <agshew@gmail.com> Cc: Glenn Judd <glenn.judd@morganstanley.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31net: Add support for XPS with QoS via traffic classesAlexander Duyck
This patch adds support for setting and using XPS when QoS via traffic classes is enabled. With this change we will factor in the priority and traffic class mapping of the packet and use that information to correctly select the queue. This allows us to define a set of queues for a given traffic class via mqprio and then configure the XPS mapping for those queues so that the traffic flows can avoid head-of-line blocking between the individual CPUs if so desired. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31net: Refactor removal of queues from XPS map and apply on num_tc changesAlexander Duyck
This patch updates the code for removing queues from the XPS map and makes it so that we can apply the code any time we change either the number of traffic classes or the mapping of a given block of queues. This way we avoid having queues pulling traffic from a foreign traffic class. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31net: Add sysfs value to determine queue traffic classAlexander Duyck
Add a sysfs attribute for a Tx queue that allows us to determine the traffic class for a given queue. This will allow us to more easily determine this in the future. It is needed as XPS will take the traffic class for a group of queues into account in order to avoid pulling traffic from one traffic class into another. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31net: Move functions for configuring traffic classes out of inline headersAlexander Duyck
The functions for configuring the traffic class to queue mappings have other effects that need to be addressed. Instead of trying to export a bunch of new functions just relocate the functions so that we can instrument them directly with the functionality they will need. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31ipv6: add mtu lock check in __ip6_rt_update_pmtuXin Long
Prior to this patch, ipv6 didn't do mtu lock check in ip6_update_pmtu. It leaded to that mtu lock doesn't really work when receiving the pkt of ICMPV6_PKT_TOOBIG. This patch is to add mtu lock check in __ip6_rt_update_pmtu just as ipv4 did in __ip_rt_update_pmtu. Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31ipv6: Don't use ufo handling on later transformed packetsJakub Sitnicki
Similar to commit c146066ab802 ("ipv4: Don't use ufo handling on later transformed packets"), don't perform UFO on packets that will be IPsec transformed. To detect it we rely on the fact that headerlen in dst_entry is non-zero only for transformation bundles (xfrm_dst objects). Unwanted segmentation can be observed with a NETIF_F_UFO capable device, such as a dummy device: DEV=dum0 LEN=1493 ip li add $DEV type dummy ip addr add fc00::1/64 dev $DEV nodad ip link set $DEV up ip xfrm policy add dir out src fc00::1 dst fc00::2 \ tmpl src fc00::1 dst fc00::2 proto esp spi 1 ip xfrm state add src fc00::1 dst fc00::2 \ proto esp spi 1 enc 'aes' 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b tcpdump -n -nn -i $DEV -t & socat /dev/zero,readbytes=$LEN udp6:[fc00::2]:$LEN tcpdump output before: IP6 fc00::1 > fc00::2: frag (0|1448) ESP(spi=0x00000001,seq=0x1), length 1448 IP6 fc00::1 > fc00::2: frag (1448|48) IP6 fc00::1 > fc00::2: ESP(spi=0x00000001,seq=0x2), length 88 ... and after: IP6 fc00::1 > fc00::2: frag (0|1448) ESP(spi=0x00000001,seq=0x1), length 1448 IP6 fc00::1 > fc00::2: frag (1448|80) Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach") Signed-off-by: Jakub Sitnicki <jkbs@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31net: add an ioctl to get a socket network namespaceAndrey Vagin
Each socket operates in a network namespace where it has been created, so if we want to dump and restore a socket, we have to know its network namespace. We have a socket_diag to get information about sockets, it doesn't report sockets which are not bound or connected. This patch introduces a new socket ioctl, which is called SIOCGSKNS and used to get a file descriptor for a socket network namespace. A task must have CAP_NET_ADMIN in a target network namespace to use this ioctl. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31netfilter: nft_dup: do not use sreg_dev if the user doesn't specify itLiping Zhang
The NFTA_DUP_SREG_DEV attribute is not a must option, so we should use it in routing lookup only when the user specify it. Fixes: d877f07112f1 ("netfilter: nf_tables: add nft_dup expression") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-31netfilter: nf_tables: destroy the set if fail to add transactionLiping Zhang
When the memory is exhausted, then we will fail to add the NFT_MSG_NEWSET transaction. In such case, we should destroy the set before we free it. Fixes: 958bee14d071 ("netfilter: nf_tables: use new transaction infrastructure to handle sets") Signed-off-by: Liping Zhang <zlpnobody@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30batman-adv: Consume skb in batadv_send_skb_to_origSven Eckelmann
Sending functions in Linux consume the supplied skbuff. Doing the same in batadv_send_skb_to_orig avoids the hack of returning -1 (-EPERM) to signal the caller that he is responsible for cleaning up the skb. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: Consume skb in batadv_frag_send_packetSven Eckelmann
Sending functions in Linux consume the supplied skbuff. Doing the same in batadv_frag_send_packet avoids the hack of returning -1 (-EPERM) to signal the caller that he is responsible for cleaning up the skb. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: Count all non-success TX packets as droppedSven Eckelmann
A failure during the submission also causes dropped packets. batadv_interface_tx should therefore also increase the DROPPED counter for these returns. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: use consume_skb for non-dropped packetsSven Eckelmann
kfree_skb assumes that an skb is dropped after an failure and notes that. consume_skb should be used in non-failure situations. Such information is important for dropmonitor netlink which tells how many packets were dropped and where this drop happened. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: Simple (re)broadcast avoidanceLinus Lüssing
With this patch, (re)broadcasting on a specific interfaces is avoided: * No neighbor: There is no need to broadcast on an interface if there is no node behind it. * Single neighbor is source: If there is just one neighbor on an interface and if this neighbor is the one we actually got this broadcast packet from, then we do not need to echo it back. * Single neighbor is originator: If there is just one neighbor on an interface and if this neighbor is the originator of this broadcast packet, then we do not need to echo it back. Goodies for BATMAN V: ("Upgrade your BATMAN IV network to V now to get these for free!") Thanks to the split of OGMv1 into two packet types, OGMv2 and ELP that is, we can now apply the same optimizations stated above to OGMv2 packets, too. Furthermore, with BATMAN V, rebroadcasts can be reduced in certain multi interface cases, too, where BATMAN IV cannot. This is thanks to the removal of the "secondary interface originator" concept in BATMAN V. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: Use own timer for multicast TT and TVLV updatesLinus Lüssing
Instead of latching onto the OGM period, this patch introduces a worker dedicated to multicast TT and TVLV updates. The reasoning is, that upon roaming especially the translation table should be updated timely to minimize connectivity issues. With BATMAN V, the idea is to greatly increase the OGM interval to reduce overhead. Unfortunately, right now this could lead to a bad user experience if multicast traffic is involved. Therefore this patch introduces a fixed 500ms update interval for multicast TT entries and the multicast TVLV. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: Remove unused skb_reset_mac_header()Linus Lüssing
During broadcast queueing, the skb_reset_mac_header() sets the skb to a place invalid for a MAC header, pointing right into the batman-adv broadcast packet. Luckily, no one seems to actually use eth_hdr(skb) afterwards until batadv_send_skb_packet() resets the header to a valid position again. Therefore removing this unnecessary, weird skb_reset_mac_header() call. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: Remove unnecessary lockdep in batadv_mcast_mla_list_freeLinus Lüssing
batadv_mcast_mla_list_free() just frees some leftovers of a local feast in batadv_mcast_mla_update(). No lockdep needed as it has nothing to do with bat_priv->mcast.mla_list. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: Add wrapper for ARP reply creationLinus Lüssing
Removing duplicate code. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: Close two alignment holes in batadv_hard_ifaceSven Eckelmann
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: Mark batadv_netlink_ops as constSven Eckelmann
The genl_ops don't need to be written by anyone and thus can be moved in a ro memory range. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-30batman-adv: Introduce missing headers for genetlink restructureSven Eckelmann
Fixes: 56989f6d8568 ("genetlink: mark families as __ro_after_init") Fixes: 2ae0f17df1cd ("genetlink: use idr to track families") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Lots of fixes, mostly drivers as is usually the case. 1) Don't treat zero DMA address as invalid in vmxnet3, from Alexey Khoroshilov. 2) Fix element timeouts in netfilter's nft_dynset, from Anders K. Pedersen. 3) Don't put aead_req crypto struct on the stack in mac80211, from Ard Biesheuvel. 4) Several uninitialized variable warning fixes from Arnd Bergmann. 5) Fix memory leak in cxgb4, from Colin Ian King. 6) Fix bpf handling of VLAN header push/pop, from Daniel Borkmann. 7) Several VRF semantic fixes from David Ahern. 8) Set skb->protocol properly in ip6_tnl_xmit(), from Eli Cooper. 9) Socket needs to be locked in udp_disconnect(), from Eric Dumazet. 10) Div-by-zero on 32-bit fix in mlx4 driver, from Eugenia Emantayev. 11) Fix stale link state during failover in NCSCI driver, from Gavin Shan. 12) Fix netdev lower adjacency list traversal, from Ido Schimmel. 13) Propvide proper handle when emitting notifications of filter deletes, from Jamal Hadi Salim. 14) Memory leaks and big-endian issues in rtl8xxxu, from Jes Sorensen. 15) Fix DESYNC_FACTOR handling in ipv6, from Jiri Bohac. 16) Several routing offload fixes in mlxsw driver, from Jiri Pirko. 17) Fix broadcast sync problem in TIPC, from Jon Paul Maloy. 18) Validate chunk len before using it in SCTP, from Marcelo Ricardo Leitner. 19) Revert a netns locking change that causes regressions, from Paul Moore. 20) Add recursion limit to GRO handling, from Sabrina Dubroca. 21) GFP_KERNEL in irq context fix in ibmvnic, from Thomas Falcon. 22) Avoid accessing stale vxlan/geneve socket in data path, from Pravin Shelar" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (189 commits) geneve: avoid using stale geneve socket. vxlan: avoid using stale vxlan socket. qede: Fix out-of-bound fastpath memory access net: phy: dp83848: add dp83822 PHY support enic: fix rq disable tipc: fix broadcast link synchronization problem ibmvnic: Fix missing brackets in init_sub_crq_irqs ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context Revert "ibmvnic: Fix releasing of sub-CRQ IRQs in interrupt context" arch/powerpc: Update parameters for csum_tcpudp_magic & csum_tcpudp_nofold net/mlx4_en: Save slave ethtool stats command net/mlx4_en: Fix potential deadlock in port statistics flow net/mlx4: Fix firmware command timeout during interrupt test net/mlx4_core: Do not access comm channel if it has not yet been initialized net/mlx4_en: Fix panic during reboot net/mlx4_en: Process all completions in RX rings after port goes up net/mlx4_en: Resolve dividing by zero in 32-bit system net/mlx4_core: Change the default value of enable_qos net/mlx4_core: Avoid setting ports to auto when only one port type is supported net/mlx4_core: Fix the resource-type enum in res tracker to conform to FW spec ...
2016-10-29genetlink: Fix generic netlink family unregisterpravin shelar
This patch fixes a typo in unregister operation. Following crash is fixed by this patch. It can be easily reproduced by repeating modprobe and rmmod module that uses genetlink. [ 261.446686] BUG: unable to handle kernel paging request at ffffffffa0264088 [ 261.448921] IP: [<ffffffff813cb70e>] strcmp+0xe/0x30 [ 261.450494] PGD 1c09067 [ 261.451266] PUD 1c0a063 [ 261.452091] PMD 8068d5067 [ 261.452525] PTE 0 [ 261.453164] [ 261.453618] Oops: 0000 [#1] SMP [ 261.454577] Modules linked in: openvswitch(+) ... [ 261.480753] RIP: 0010:[<ffffffff813cb70e>] [<ffffffff813cb70e>] strcmp+0xe/0x30 [ 261.483069] RSP: 0018:ffffc90003c0bc28 EFLAGS: 00010282 [ 261.510145] Call Trace: [ 261.510896] [<ffffffff816f10ca>] genl_family_find_byname+0x5a/0x70 [ 261.512819] [<ffffffff816f2319>] genl_register_family+0xb9/0x630 [ 261.514805] [<ffffffffa02840bc>] dp_init+0xbc/0x120 [openvswitch] [ 261.518268] [<ffffffff8100217d>] do_one_initcall+0x3d/0x160 [ 261.525041] [<ffffffff811808a9>] do_init_module+0x60/0x1f1 [ 261.526754] [<ffffffff8110687f>] load_module+0x22af/0x2860 [ 261.530144] [<ffffffff81107026>] SYSC_finit_module+0x96/0xd0 [ 261.531901] [<ffffffff8110707e>] SyS_finit_module+0xe/0x10 [ 261.533605] [<ffffffff8100391e>] do_syscall_64+0x6e/0x180 [ 261.535284] [<ffffffff817c2faf>] entry_SYSCALL64_slow_path+0x25/0x25 [ 261.546512] RIP [<ffffffff813cb70e>] strcmp+0xe/0x30 [ 261.550198] ---[ end trace 76505a814dd68770 ]--- Fixes: 2ae0f17df1c ("genetlink: use idr to track families"). Reported-by: Jarno Rajahalme <jarno@ovn.org> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Pravin B Shelar <pshelar@ovn.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29Merge tag 'mac80211-next-for-davem-2016-10-28' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Among various cleanups and improvements, we have the following: * client FILS authentication support in mac80211 (Jouni) * AP/VLAN multicast improvements (Michael Braun) * config/advertising support for differing beacon intervals on multiple virtual interfaces (Purushottam Kushwaha, myself) * deprecate the old WDS mode for cfg80211-based drivers, the mode is hardly usable since it doesn't support any "modern" features like WPA encryption (2003), HT (2009) or VHT (2014), I'm not even sure WEP (introduced in 1997) could be done. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29tipc: fix broadcast link synchronization problemJon Paul Maloy
In commit 2d18ac4ba745 ("tipc: extend broadcast link initialization criteria") we tried to fix a problem with the initial synchronization of broadcast link acknowledge values. Unfortunately that solution is not sufficient to solve the issue. We have seen it happen that LINK_PROTOCOL/STATE packets with a valid non-zero unicast acknowledge number may bypass BCAST_PROTOCOL initialization, NAME_DISTRIBUTOR and other STATE packets with invalid broadcast acknowledge numbers, leading to premature opening of the broadcast link. When the bypassed packets finally arrive, they are inadvertently accepted, and the already correctly initialized acknowledge number in the broadcast receive link is overwritten by the invalid (zero) value of the said packets. After this the broadcast link goes stale. We now fix this by marking the packets where we know the acknowledge value is or may be invalid, and then ignoring the acks from those. To this purpose, we claim an unused bit in the header to indicate that the value is invalid. We set the bit to 1 in the initial BCAST_PROTOCOL synchronization packet and all initial ("bulk") NAME_DISTRIBUTOR packets, plus those LINK_PROTOCOL packets sent out before the broadcast links are fully synchronized. This minor protocol update is fully backwards compatible. Reported-by: John Thompson <thompa.atl@gmail.com> Tested-by: John Thompson <thompa.atl@gmail.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29tcp_bbr: add a state transition diagram and accompanying commentNeal Cardwell
Document the possible state transitions for a BBR flow, and also add a prose summary of the state machine, covering the life of a typical BBR flow. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29Merge tag 'batadv-next-for-davem-20161027' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This code cleanup patchset includes the following changes (chronological order): - bump version strings, by Simon Wunderlich - README updates/clean up, by Sven Eckelmann (4 patches) - Code clean up and restructuring by Sven Eckelmann (2 patches) - Kerneldoc fix in forw_packet structure, by Linus Luessing - Remove unused argument in dbg_arp, by Antonio Quartulli - Add support to build batman-adv without wireless, by Linus Luessing - Restructure error handling for is_ap_isolated, by Markus Elfring - Remove unused initialization in various functions, by Sven Eckelmann - Use better names for fragment and gateway list heads, by Sven Eckelmann (2 patches) - Convert to octal permissions for files, by Sven Eckelmann - Avoid precedence issues for some macros, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29rds: debug messages are enabled by defaultshamir rabinovitch
rds use Kconfig option called "RDS_DEBUG" to enable rds debug messages. This option cause the rds Makefile to add -DDEBUG to the rds gcc command line. When CONFIG_DYNAMIC_DEBUG is enabled, the "DEBUG" macro is used by include/linux/dynamic_debug.h to decide if dynamic debug prints should be sent by default to the kernel log. rds should not enable this macro for production builds. rds dynamic debug work as expected follow this fix. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29Merge tag 'mac80211-for-davem-2016-10-27' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just two fixes: * a fix to process all events while suspending, so any potential calls into the driver are done before it is suspended * small markup fixes for the sphinx documentation conversion that's coming into the tree via the doc tree ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29net: dev: Fix non-RCU based lower dev walkerDavid Ahern
netdev_walk_all_lower_dev is not properly walking the lower device list. Commit 1a3f060c1a47 made netdev_walk_all_lower_dev similar to netdev_walk_all_upper_dev_rcu and netdev_walk_all_lower_dev_rcu but failed to update its netdev_next_lower_dev iterator. This patch fixes that. Fixes: 1a3f060c1a47 ("net: Introduce new api for walking upper and lower devices") Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29flow_dissector: __skb_get_hash_symmetric arg can be constFlorian Westphal
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-29tcp/dccp: drop SYN packets if accept queue is fullEric Dumazet
Per listen(fd, backlog) rules, there is really no point accepting a SYN, sending a SYNACK, and dropping the following ACK packet if accept queue is full, because application is not draining accept queue fast enough. This behavior is fooling TCP clients that believe they established a flow, while there is nothing at server side. They might then send about 10 MSS (if using IW10) that will be dropped anyway while server is under stress. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 22:42:40 +0000