| Age | Commit message (Collapse) | Author |
|---|
|
There are no legacy rates on 60GHz or sub-1GHz band, so modify the check.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Link: https://lore.kernel.org/r/20220308021645.16272-1-MeiChia.Chiu@mediatek.com
[Ghz -> GHz]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Previous memory allocations in this function already use GFP_KERNEL, so
use __dev_alloc_skb() and an explicit GFP_KERNEL instead of an implicit
GFP_ATOMIC.
This gives more opportunities of successful allocation.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/194a0e2ff00c3fae88cc9fba47431747360c8242.1645345378.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Property list (altname is a link "property") is wrapped
in a nlattr. nlattrs length is 16bit so practically
speaking the list of properties can't be longer than
that, otherwise user space would have to interpret
broken netlink messages.
Prevent the problem from occurring by checking the length
of the property list before adding new entries.
Reported-by: George Shuklin <george.shuklin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
George reports that altnames can eat up kernel memory.
We should charge that memory appropriately.
Reported-by: George Shuklin <george.shuklin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Few years ago OVS user space made a strange choice in the commit [1]
to define types only valid for the user space inside the copy of a
kernel uAPI header. '#ifndef __KERNEL__' and another attribute was
added later.
This leads to the inevitable clash between user space and kernel types
when the kernel uAPI is extended. The issue was unveiled with the
addition of a new type for IPv6 extension header in kernel uAPI.
When kernel provides the OVS_KEY_ATTR_IPV6_EXTHDRS attribute to the
older user space application, application tries to parse it as
OVS_KEY_ATTR_PACKET_TYPE and discards the whole netlink message as
malformed. Since OVS_KEY_ATTR_IPV6_EXTHDRS is supplied along with
every IPv6 packet that goes to the user space, IPv6 support is fully
broken.
Fixing that by bringing these user space attributes to the kernel
uAPI to avoid the clash. Strictly speaking this is not the problem
of the kernel uAPI, but changing it is the only way to avoid breakage
of the older user space applications at this point.
These 2 types are explicitly rejected now since they should not be
passed to the kernel. Additionally, OVS_KEY_ATTR_TUNNEL_INFO moved
out from the '#ifdef __KERNEL__' as there is no good reason to hide
it from the userspace. And it's also explicitly rejected now, because
it's for in-kernel use only.
Comments with warnings were added to avoid the problem coming back.
(1 << type) converted to (1ULL << type) to avoid integer overflow on
OVS_KEY_ATTR_IPV6_EXTHDRS, since it equals 32 now.
[1] beb75a40fdc2 ("userspace: Switching of L3 packets in L2 pipeline")
Fixes: 28a3f0601727 ("net: openvswitch: IPv6: Add IPv6 extension header support")
Link: https://lore.kernel.org/netdev/3adf00c7-fe65-3ef4-b6d7-6d8a0cad8a5f@nvidia.com
Link: https://github.com/openvswitch/ovs/commit/beb75a40fdc295bfd6521b0068b4cd12f6de507c
Reported-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20220309222033.3018976-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-03-10
The first 3 patches are by Oliver Hartkopp, target the CAN ISOTP
protocol and update the CAN frame sending behavior, and increases the
max PDU size to 64 kByte.
The next 2 patches are also by Oliver Hartkopp and update the virtual
VXCAN driver so that CAN frames send into the peer name space show up
as RX'ed CAN frames.
Vincent Mailhol contributes a patch for the etas_es58x driver to fix a
false positive dereference uninitialized variable warning.
2 patches by Ulrich Hecht add r8a779a0 SoC support to the rcar_canfd
driver.
The remaining 21 patches target the gs_usb driver and are by Peter
Fink, Ben Evans, Eric Evenchick and me. This series cleans up the
gs-usb driver, documents some bits of the USB ABI used by the widely
used open source firmware candleLight, adds support for up to 3 CAN
interfaces per USB device, adds CAN-FD support, adds quirks for some
hardware and software workarounds and finally adds support for 2 new
devices.
* tag 'linux-can-next-for-5.18-20220310' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (29 commits)
can: gs_usb: add VID/PID for ABE CAN Debugger devices
can: gs_usb: add VID/PID for CES CANext FD devices
can: gs_usb: add extended bt_const feature
can: gs_usb: activate quirks for CANtact Pro unconditionally
can: gs_usb: add quirk for CANtact Pro overlapping GS_USB_BREQ value
can: gs_usb: add usb quirk for NXP LPC546xx controllers
can: gs_usb: add CAN-FD support
can: gs_usb: use union and FLEX_ARRAY for data in struct gs_host_frame
can: gs_usb: support up to 3 channels per device
can: gs_usb: gs_usb_probe(): introduce udev and make use of it
can: gs_usb: document the PAD_PKTS_TO_MAX_PKT_SIZE feature
can: gs_usb: document the USER_ID feature
can: gs_usb: update GS_CAN_FEATURE_IDENTIFY documentation
can: gs_usb: add HW timestamp mode bit
can: gs_usb: gs_make_candev(): call SET_NETDEV_DEV() after handling all bt_const->feature
can: gs_usb: rewrap usb_control_msg() and usb_fill_bulk_urb()
can: gs_usb: rewrap error messages
can: gs_usb: GS_CAN_FLAG_OVERFLOW: make use of BIT()
can: gs_usb: sort include files alphabetically
can: gs_usb: fix checkpatch warning
...
====================
Link: https://lore.kernel.org/r/20220310142903.341658-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net/dsa/dsa2.c
commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails")
commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master")
https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/
drivers/net/ethernet/intel/ice/ice.h
commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU")
commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device")
https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/
drivers/staging/gdm724x/gdm_lte.c
commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()")
commit 4bcc4249b4cf ("staging: Use netif_rx().")
https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, and ipsec.
Current release - regressions:
- Bluetooth: fix unbalanced unlock in set_device_flags()
- Bluetooth: fix not processing all entries on cmd_sync_work, make
connect with qualcomm and intel adapters reliable
- Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"
- xdp: xdp_mem_allocator can be NULL in trace_mem_connect()
- eth: ice: fix race condition and deadlock during interface enslave
Current release - new code bugs:
- tipc: fix incorrect order of state message data sanity check
Previous releases - regressions:
- esp: fix possible buffer overflow in ESP transformation
- dsa: unlock the rtnl_mutex when dsa_master_setup() fails
- phy: meson-gxl: fix interrupt handling in forced mode
- smsc95xx: ignore -ENODEV errors when device is unplugged
Previous releases - always broken:
- xfrm: fix tunnel mode fragmentation behavior
- esp: fix inter address family tunneling on GSO
- tipc: fix null-deref due to race when enabling bearer
- sctp: fix kernel-infoleak for SCTP sockets
- eth: macb: fix lost RX packet wakeup race in NAPI receive
- eth: intel stop disabling VFs due to PF error responses
- eth: bcmgenet: don't claim WOL when its not available"
* tag 'net-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
xdp: xdp_mem_allocator can be NULL in trace_mem_connect().
ice: Fix race condition during interface enslave
net: phy: meson-gxl: improve link-up behavior
net: bcmgenet: Don't claim WOL when its not available
net: arc_emac: Fix use after free in arc_mdio_probe()
sctp: fix kernel-infoleak for SCTP sockets
net: phy: correct spelling error of media in documentation
net: phy: DP83822: clear MISR2 register to disable interrupts
gianfar: ethtool: Fix refcount leak in gfar_get_ts_info
selftests: pmtu.sh: Kill nettest processes launched in subshell.
selftests: pmtu.sh: Kill tcpdump processes launched by subshell.
NFC: port100: fix use-after-free in port100_send_complete
net/mlx5e: SHAMPO, reduce TIR indication
net/mlx5e: Lag, Only handle events from highest priority multipath entry
net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE
net/mlx5: Fix a race on command flush flow
net/mlx5: Fix size field in bufferx_reg struct
ax25: Fix NULL pointer dereference in ax25_kill_by_device
net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr
net: ethernet: lpc_eth: Handle error for clk_enable
...
|
|
Since the commit mentioned below __xdp_reg_mem_model() can return a NULL
pointer. This pointer is dereferenced in trace_mem_connect() which leads
to segfault.
The trace points (mem_connect + mem_disconnect) were put in place to
pair connect/disconnect using the IDs. The ID is only assigned if
__xdp_reg_mem_model() does not return NULL. That connect trace point is
of no use if there is no ID.
Skip that connect trace point if xdp_alloc is NULL.
[ Toke Høiland-Jørgensen delivered the reasoning for skipping the trace
point ]
Fixes: 4a48ef70b93b8 ("xdp: Allow registering memory model without rxq reference")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/YikmmXsffE+QajTB@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported a kernel infoleak [1] of 4 bytes.
After analysis, it turned out r->idiag_expires is not initialized
if inet_sctp_diag_fill() calls inet_diag_msg_common_fill()
Make sure to clear idiag_timer/idiag_retrans/idiag_expires
and let inet_diag_msg_sctpasoc_fill() fill them again if needed.
[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:154 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
copyout lib/iov_iter.c:154 [inline]
_copy_to_iter+0x6ef/0x25a0 lib/iov_iter.c:668
copy_to_iter include/linux/uio.h:162 [inline]
simple_copy_to_iter+0xf3/0x140 net/core/datagram.c:519
__skb_datagram_iter+0x2d5/0x11b0 net/core/datagram.c:425
skb_copy_datagram_iter+0xdc/0x270 net/core/datagram.c:533
skb_copy_datagram_msg include/linux/skbuff.h:3696 [inline]
netlink_recvmsg+0x669/0x1c80 net/netlink/af_netlink.c:1977
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
__sys_recvfrom+0x795/0xa10 net/socket.c:2097
__do_sys_recvfrom net/socket.c:2115 [inline]
__se_sys_recvfrom net/socket.c:2111 [inline]
__x64_sys_recvfrom+0x19d/0x210 net/socket.c:2111
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_post_alloc_hook mm/slab.h:737 [inline]
slab_alloc_node mm/slub.c:3247 [inline]
__kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4975
kmalloc_reserve net/core/skbuff.c:354 [inline]
__alloc_skb+0x545/0xf90 net/core/skbuff.c:426
alloc_skb include/linux/skbuff.h:1158 [inline]
netlink_dump+0x3e5/0x16c0 net/netlink/af_netlink.c:2248
__netlink_dump_start+0xcf8/0xe90 net/netlink/af_netlink.c:2373
netlink_dump_start include/linux/netlink.h:254 [inline]
inet_diag_handler_cmd+0x2e7/0x400 net/ipv4/inet_diag.c:1341
sock_diag_rcv_msg+0x24a/0x620
netlink_rcv_skb+0x40c/0x7e0 net/netlink/af_netlink.c:2494
sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:277
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x1093/0x1360 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x14d9/0x1720 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
sock_write_iter+0x594/0x690 net/socket.c:1061
do_iter_readv_writev+0xa7f/0xc70
do_iter_write+0x52c/0x1500 fs/read_write.c:851
vfs_writev fs/read_write.c:924 [inline]
do_writev+0x645/0xe00 fs/read_write.c:967
__do_sys_writev fs/read_write.c:1040 [inline]
__se_sys_writev fs/read_write.c:1037 [inline]
__x64_sys_writev+0xe5/0x120 fs/read_write.c:1037
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Bytes 68-71 of 2508 are uninitialized
Memory access of size 2508 starts at ffff888114f9b000
Data copied to user address 00007f7fe09ff2e0
CPU: 1 PID: 3478 Comm: syz-executor306 Not tainted 5.17.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20220310001145.297371-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch is to simplify the uapi bpf.h regarding to the tstamp type
and use a similar way as the kernel to describe the value stored
in __sk_buff->tstamp.
My earlier thought was to avoid describing the semantic and
clock base for the rcv timestamp until there is more clarity
on the use case, so the __sk_buff->delivery_time_type naming instead
of __sk_buff->tstamp_type.
With some thoughts, it can reuse the UNSPEC naming. This patch first
removes BPF_SKB_DELIVERY_TIME_NONE and also
rename BPF_SKB_DELIVERY_TIME_UNSPEC to BPF_SKB_TSTAMP_UNSPEC
and BPF_SKB_DELIVERY_TIME_MONO to BPF_SKB_TSTAMP_DELIVERY_MONO.
The semantic of BPF_SKB_TSTAMP_DELIVERY_MONO is the same:
__sk_buff->tstamp has delivery time in mono clock base.
BPF_SKB_TSTAMP_UNSPEC means __sk_buff->tstamp has the (rcv)
tstamp at ingress and the delivery time at egress. At egress,
the clock base could be found from skb->sk->sk_clockid.
__sk_buff->tstamp == 0 naturally means NONE, so NONE is not needed.
With BPF_SKB_TSTAMP_UNSPEC for the rcv tstamp at ingress,
the __sk_buff->delivery_time_type is also renamed to __sk_buff->tstamp_type
which was also suggested in the earlier discussion:
https://lore.kernel.org/bpf/b181acbe-caf8-502d-4b7b-7d96b9fc5d55@iogearbox.net/
The above will then make __sk_buff->tstamp and __sk_buff->tstamp_type
the same as its kernel skb->tstamp and skb->mono_delivery_time
counter part.
The internal kernel function bpf_skb_convert_dtime_type_read() is then
renamed to bpf_skb_convert_tstamp_type_read() and it can be simplified
with the BPF_SKB_DELIVERY_TIME_NONE gone. A BPF_ALU32_IMM(BPF_AND)
insn is also saved by using BPF_JMP32_IMM(BPF_JSET).
The bpf helper bpf_skb_set_delivery_time() is also renamed to
bpf_skb_set_tstamp(). The arg name is changed from dtime
to tstamp also. It only allows setting tstamp 0 for
BPF_SKB_TSTAMP_UNSPEC and it could be relaxed later
if there is use case to change mono delivery time to
non mono.
prog->delivery_time_access is also renamed to prog->tstamp_type_access.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220309090509.3712315-1-kafai@fb.com
|
|
BPF_JMP32_IMM(BPF_JSET) is used to save a BPF_ALU32_IMM(BPF_AND).
The skb->tc_at_ingress and skb->mono_delivery_time are at the same
offset, so only one BPF_LDX_MEM(BPF_B) is needed.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220309090502.3711982-1-kafai@fb.com
|
|
The skb->tc_at_ingress and skb->mono_delivery_time are at the same
byte offset. Thus, only one BPF_LDX_MEM(BPF_B) is needed
and both bits can be tested together.
/* BPF_READ: a = __sk_buff->tstamp */
if (skb->tc_at_ingress && skb->mono_delivery_time)
a = 0;
else
a = skb->tstamp;
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220309090456.3711530-1-kafai@fb.com
|
|
This patch removes the TC_AT_INGRESS_OFFSET and
SKB_MONO_DELIVERY_TIME_OFFSET macros. Instead, PKT_VLAN_PRESENT_OFFSET
is used because all of them are at the same offset. Comment is added to
make it clear that changing the position of tc_at_ingress or
mono_delivery_time will require to adjust the defined macros.
The earlier discussion can be found here:
https://lore.kernel.org/bpf/419d994e-ff61-7c11-0ec7-11fefcb0186e@iogearbox.net/
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220309090450.3710955-1-kafai@fb.com
|
|
It is allocated with kvmalloc(), the corresponding release function
should not be kfree(), use kvfree() instead.
Generated by: scripts/coccinelle/api/kfree_mismatch.cocci
Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20220310092828.13405-1-hanyihao@vivo.com
|
|
The kernel test robot pointed out that the newly added
bpf_test_run_xdp_live() runner doesn't set the retval in the caller (by
design), which means that the variable can be passed unitialised to
bpf_test_finish(). Fix this by initialising the variable properly.
Fixes: b530e9e1063e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220310110228.161869-1-toke@redhat.com
|
|
The reason to extend the max PDU size from 4095 Byte (12 bit length value)
to a 32 bit value (up to 4 GByte) was to be able to flash 64 kByte
bootloaders with a single ISO-TP PDU. The max PDU size in the Linux kernel
implementation was set to 8200 Bytes to be able to test the length
information escape sequence.
It turns out that the demand for 64 kByte PDUs is real so the value for
MAX_MSG_LENGTH is set to 66000 to be able to potentially add some checksums
to the 65.536 Byte block.
Link: https://github.com/linux-can/can-utils/issues/347#issuecomment-1056142301
Link: https://lore.kernel.org/all/20220309120416.83514-3-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The N_As value describes the time a CAN frame needs on the wire when
transmitted by the CAN controller. Even very short CAN FD frames need
arround 100 usecs (bitrate 1Mbit/s, data bitrate 8Mbit/s).
Having N_As to be zero (the former default) leads to 'no CAN frame
separation' when STmin is set to zero by the receiving node. This 'burst
mode' should not be enabled by default as it could potentially dump a high
number of CAN frames into the netdev queue from the soft hrtimer context.
This does not affect the system stability but is just not nice and
cooperative.
With this N_As/frame_txtime value the 'burst mode' is disabled by default.
As user space applications usually do not set the frame_txtime element
of struct can_isotp_options the new in-kernel default is very likely
overwritten with zero when the sockopt() CAN_ISOTP_OPTS is invoked.
To make sure that a N_As value of zero is only set intentional the
value '0' is now interpreted as 'do not change the current value'.
When a frame_txtime of zero is required for testing purposes this
CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime.
Link: https://lore.kernel.org/all/20220309120416.83514-2-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Instead of dumping the CAN frames into the netdevice queue the process to
transmit consecutive frames (CF) now waits for the frame to be transmitted
and therefore echo'ed from the CAN interface.
Link: https://lore.kernel.org/all/20220309120416.83514-1-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
pfkey_register
Add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
to initialize the buffer of supp_skb to fix a kernel-info-leak issue.
1) Function pfkey_register calls compose_sadb_supported to request
a sk_buff. 2) compose_sadb_supported calls alloc_sbk to allocate
a sk_buff, but it doesn't zero it. 3) If auth_len is greater 0, then
compose_sadb_supported treats the memory as a struct sadb_supported and
begins to initialize. But it just initializes the field sadb_supported_len
and field sadb_supported_exttype without field sadb_supported_reserved.
Reported-by: TCS Robot <tcs_robot@tencent.com>
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
DSA_TAG_PROTO_RTL8_4L is not defined. It should be
DSA_TAG_PROTO_RTL8_4T.
Fixes: cd87fecdedd7 ("net: dsa: tag_rtl8_4: add rtl8_4t trailing variant")
Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220309175641.12943-1-luizluca@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Back when tcp_tso_autosize() and TCP pacing were introduced,
our focus was really to reduce burst sizes for long distance
flows.
The simple heuristic of using sk_pacing_rate/1024 has worked
well, but can lead to too small packets for hosts in the same
rack/cluster, when thousands of flows compete for the bottleneck.
Neal Cardwell had the idea of making the TSO burst size
a function of both sk_pacing_rate and tcp_min_rtt()
Indeed, for local flows, sending bigger bursts is better
to reduce cpu costs, as occasional losses can be repaired
quite fast.
This patch is based on Neal Cardwell implementation
done more than two years ago.
bbr is adjusting max_pacing_rate based on measured bandwidth,
while cubic would over estimate max_pacing_rate.
/proc/sys/net/ipv4/tcp_tso_rtt_log can be used to tune or disable
this new feature, in logarithmic steps.
Tested:
100Gbit NIC, two hosts in the same rack, 4K MTU.
600 flows rate-limited to 20000000 bytes per second.
Before patch: (TSO sizes would be limited to 20000000/1024/4096 -> 4 segments per TSO)
~# echo 0 >/proc/sys/net/ipv4/tcp_tso_rtt_log
~# nstat -n;perf stat ./super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000;nstat|egrep "TcpInSegs|TcpOutSegs|TcpRetransSegs|Delivered"
96005
Performance counter stats for './super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000':
65,945.29 msec task-clock # 2.845 CPUs utilized
1,314,632 context-switches # 19935.279 M/sec
5,292 cpu-migrations # 80.249 M/sec
940,641 page-faults # 14264.023 M/sec
201,117,030,926 cycles # 3049769.216 GHz (83.45%)
17,699,435,405 stalled-cycles-frontend # 8.80% frontend cycles idle (83.48%)
136,584,015,071 stalled-cycles-backend # 67.91% backend cycles idle (83.44%)
53,809,530,436 instructions # 0.27 insn per cycle
# 2.54 stalled cycles per insn (83.36%)
9,062,315,523 branches # 137422329.563 M/sec (83.22%)
153,008,621 branch-misses # 1.69% of all branches (83.32%)
23.182970846 seconds time elapsed
TcpInSegs 15648792 0.0
TcpOutSegs 58659110 0.0 # Average of 3.7 4K segments per TSO packet
TcpExtTCPDelivered 58654791 0.0
TcpExtTCPDeliveredCE 19 0.0
After patch:
~# echo 9 >/proc/sys/net/ipv4/tcp_tso_rtt_log
~# nstat -n;perf stat ./super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000;nstat|egrep "TcpInSegs|TcpOutSegs|TcpRetransSegs|Delivered"
96046
Performance counter stats for './super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000':
48,982.58 msec task-clock # 2.104 CPUs utilized
186,014 context-switches # 3797.599 M/sec
3,109 cpu-migrations # 63.472 M/sec
941,180 page-faults # 19214.814 M/sec
153,459,763,868 cycles # 3132982.807 GHz (83.56%)
12,069,861,356 stalled-cycles-frontend # 7.87% frontend cycles idle (83.32%)
120,485,917,953 stalled-cycles-backend # 78.51% backend cycles idle (83.24%)
36,803,672,106 instructions # 0.24 insn per cycle
# 3.27 stalled cycles per insn (83.18%)
5,947,266,275 branches # 121417383.427 M/sec (83.64%)
87,984,616 branch-misses # 1.48% of all branches (83.43%)
23.281200256 seconds time elapsed
TcpInSegs 1434706 0.0
TcpOutSegs 58883378 0.0 # Average of 41 4K segments per TSO packet
TcpExtTCPDelivered 58878971 0.0
TcpExtTCPDeliveredCE 9664 0.0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20220309015757.2532973-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp_should_autocork() is evaluating if it makes senses
to not immediately send current skb, hoping that
user space will add more payload on it by the
time TCP stack reacts to upcoming TX completions.
If current skb got MSG_EOR mark, then we know
that no further data will be added, it is therefore
futile to wait.
SOF_TIMESTAMPING_TX_ACK will become a bit more accurate,
if prior packets are still in qdisc/device queues.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20220309054706.2857266-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
when CONFIG_SYSCTL not set, smc_sysctl_net_init/exit
need to be static inline to avoid missing-prototypes
if compile with W=1.
Since __net_exit has noinline annotation when CONFIG_NET_NS
not set, it should not be used with static inline.
So remove the __net_init/exit when CONFIG_SYSCTL not set.
Fixes: 7de8eb0d9039 ("net/smc: fix compile warning for smc_sysctl")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220309033051.41893-1-dust.li@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds support for running XDP programs through BPF_PROG_RUN in a mode
that enables live packet processing of the resulting frames. Previous uses
of BPF_PROG_RUN for XDP returned the XDP program return code and the
modified packet data to userspace, which is useful for unit testing of XDP
programs.
The existing BPF_PROG_RUN for XDP allows userspace to set the ingress
ifindex and RXQ number as part of the context object being passed to the
kernel. This patch reuses that code, but adds a new mode with different
semantics, which can be selected with the new BPF_F_TEST_XDP_LIVE_FRAMES
flag.
When running BPF_PROG_RUN in this mode, the XDP program return codes will
be honoured: returning XDP_PASS will result in the frame being injected
into the networking stack as if it came from the selected networking
interface, while returning XDP_TX and XDP_REDIRECT will result in the frame
being transmitted out that interface. XDP_TX is translated into an
XDP_REDIRECT operation to the same interface, since the real XDP_TX action
is only possible from within the network drivers themselves, not from the
process context where BPF_PROG_RUN is executed.
Internally, this new mode of operation creates a page pool instance while
setting up the test run, and feeds pages from that into the XDP program.
The setup cost of this is amortised over the number of repetitions
specified by userspace.
To support the performance testing use case, we further optimise the setup
step so that all pages in the pool are pre-initialised with the packet
data, and pre-computed context and xdp_frame objects stored at the start of
each page. This makes it possible to entirely avoid touching the page
content on each XDP program invocation, and enables sending up to 9
Mpps/core on my test box.
Because the data pages are recycled by the page pool, and the test runner
doesn't re-initialise them for each run, subsequent invocations of the XDP
program will see the packet data in the state it was after the last time it
ran on that particular page. This means that an XDP program that modifies
the packet before redirecting it has to be careful about which assumptions
it makes about the packet content, but that is only an issue for the most
naively written programs.
Enabling the new flag is only allowed when not setting ctx_out and data_out
in the test specification, since using it means frames will be redirected
somewhere else, so they can't be returned.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-2-toke@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2022-03-09
1) Fix IPv6 PMTU discovery for xfrm interfaces.
From Lina Wang.
2) Revert failing for policies and states that are
configured with XFRMA_IF_ID 0. It broke a
user configuration. From Kai Lueke.
3) Fix a possible buffer overflow in the ESP output path.
4) Fix ESP GSO for tunnel and BEET mode on inter address
family tunnels.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When two ax25 devices attempted to establish connection, the requester use ax25_create(),
ax25_bind() and ax25_connect() to initiate connection. The receiver use ax25_rcv() to
accept connection and use ax25_create_cb() in ax25_rcv() to create ax25_cb, but the
ax25_cb->sk is NULL. When the receiver is detaching, a NULL pointer dereference bug
caused by sock_hold(sk) in ax25_kill_by_device() will happen. The corresponding
fail log is shown below:
===============================================================
BUG: KASAN: null-ptr-deref in ax25_device_event+0xfd/0x290
Call Trace:
...
ax25_device_event+0xfd/0x290
raw_notifier_call_chain+0x5e/0x70
dev_close_many+0x174/0x220
unregister_netdevice_many+0x1f7/0xa60
unregister_netdevice_queue+0x12f/0x170
unregister_netdev+0x13/0x20
mkiss_close+0xcd/0x140
tty_ldisc_release+0xc0/0x220
tty_release_struct+0x17/0xa0
tty_release+0x62d/0x670
...
This patch add condition check in ax25_kill_by_device(). If s->sk is
NULL, it will goto if branch to kill device.
Fixes: 4e0f718daf97 ("ax25: improve the incomplete fix to avoid UAF and NPD bugs")
Reported-by: Thomas Osterried <thomas@osterried.de>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have a number of cases where function returns drop/no drop
decision as a boolean. Now that we want to report the reason
code as well we have to pass extra output arguments.
We can make the reason code evaluate correctly as bool.
I believe we're good to reorder the reasons as they are
reported to user space as strings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Felix driver declares FDB isolation but puts all standalone ports in
VID 0. This is mostly problem-free as discussed with Alvin here:
https://patchwork.kernel.org/project/netdevbpf/cover/20220302191417.1288145-1-vladimir.oltean@nxp.com/#24763870
however there is one catch. DSA still thinks that FDB entries are
installed on the CPU port as many times as there are user ports, and
this is problematic when multiple user ports share the same MAC address.
Consider the default case where all user ports inherit their MAC address
from the DSA master, and then the user runs:
ip link set swp0 address 00:01:02:03:04:05
The above will make dsa_slave_set_mac_address() call
dsa_port_standalone_host_fdb_add() for 00:01:02:03:04:05 in port 0's
standalone database, and dsa_port_standalone_host_fdb_del() for the old
address of swp0, again in swp0's standalone database.
Both the ->port_fdb_add() and ->port_fdb_del() will be propagated down
to the felix driver, which will end up deleting the old MAC address from
the CPU port. But this is still in use by other user ports, so we end up
breaking unicast termination for them.
There isn't a problem in the fact that DSA keeps track of host
standalone addresses in the individual database of each user port: some
drivers like sja1105 need this. There also isn't a problem in the fact
that some drivers choose the same VID/FID for all standalone ports.
It is just that the deletion of these host addresses must be delayed
until they are known to not be in use any longer, and only the driver
has this knowledge. Since DSA keeps these addresses in &cpu_dp->fdbs and
&cpu_db->mdbs, it is just a matter of walking over those lists and see
whether the same MAC address is present on the CPU port in the port db
of another user port.
I have considered reusing the generic dsa_port_walk_fdbs() and
dsa_port_walk_mdbs() schemes for this, but locking makes it difficult.
In the ->port_fdb_add() method and co, &dp->addr_lists_lock is held, but
dsa_port_walk_fdbs() also acquires that lock. Also, even assuming that
we introduce an unlocked variant of the address iterator, we'd still
need some relatively complex data structures, and a void *ctx in the
dsa_fdb_walk_cb_t which we don't currently pass, such that drivers are
able to figure out, after iterating, whether the same MAC address is or
isn't present in the port db of another port.
All the above, plus the fact that I expect other drivers to follow the
same model as felix where all standalone ports use the same FID, made me
conclude that a generic method provided by DSA is necessary:
dsa_fdb_present_in_other_db() and the mdb equivalent. Felix calls this
from the ->port_fdb_del() handler for the CPU port, when the database
was classified to either a port db, or a LAG db.
For symmetry, we also call this from ->port_fdb_add(), because if the
address was installed once, then installing it a second time serves no
purpose: it's already in hardware in VID 0 and it affects all standalone
ports.
This change moves dsa_db_equal() from switch.c to dsa.c, since it now
has one more caller.
Fixes: 54c319846086 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the slave unicast address is synced to hardware and to the DSA
master during dsa_slave_open(), this means that a call to
dsa_slave_set_mac_address() while the slave interface is down will
result to a call to dsa_port_standalone_host_fdb_del() and to
dev_uc_del() for the MAC address while there was no previous
dsa_port_standalone_host_fdb_add() or dev_uc_add().
This is a partial revert of the blamed commit below, which was too
aggressive.
Fixes: 35aae5ab9121 ("net: dsa: remove workarounds for changing master promisc/allmulti only while up")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
&cpu_db->fdbs and &cpu_db->mdbs may be uninitialized lists during some
call paths of felix_set_tag_protocol().
There was an attempt to avoid calling dsa_port_walk_fdbs() during setup
by using a "bool change" in the felix driver, but this doesn't work when
the tagging protocol is defined in the device tree, and a change is
triggered by DSA at pseudo-runtime:
dsa_tree_setup_switches
-> dsa_switch_setup
-> dsa_switch_setup_tag_protocol
-> ds->ops->change_tag_protocol
dsa_tree_setup_ports
-> dsa_port_setup
-> &dp->fdbs and &db->mdbs only get initialized here
So it seems like the only way to fix this is to move the initialization
of these lists earlier.
dsa_port_touch() is called from dsa_switch_touch_ports() which is called
from dsa_switch_parse_of(), and this runs completely before
dsa_tree_setup(). Similarly, dsa_switch_release_ports() runs after
dsa_tree_teardown().
Fixes: f9cef64fa23f ("net: dsa: felix: migrate host FDB and MDB entries when changing tag proto")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There has been recent work towards matching each switchdev object
addition with a corresponding deletion.
Therefore, having elements in the fdbs, mdbs, vlans lists at the time of
a shared (DSA, CPU) port's teardown is indicative of a bug somewhere
else, and not something that is to be expected.
We shouldn't try to silently paper over that. Instead, print a warning
and a stack trace.
This change is a prerequisite for moving the initialization/teardown of
these lists. Make it clear that clearing the lists isn't needed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When receiving a state message, function tipc_link_validate_msg()
is called to validate its header portion. Then, its data portion
is validated before it can be accessed correctly. However, current
data sanity check is done after the message header is accessed to
update some link variables.
This commit fixes this issue by moving the data sanity check to
the beginning of state message handling and right after the header
sanity check.
Fixes: 9aa422ad3266 ("tipc: improve size validations for received domain records")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20220308021200.9245-1-tung.q.nguyen@dektech.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ENOTSUPP is documented as "should never be seen by user programs",
and thus not exposed in <errno.h>, and thus applications cannot safely
check against it (they get "Unknown error 524" as strerror). We should
rather return the well-known -EOPNOTSUPP.
This is similar to 2230a7ef5198 ("drop_monitor: Use correct error
code") and 4a5cdc604b9c ("net/tls: Fix return values to avoid
ENOTSUPP"), which did not seem to cause problems.
Signed-off-by: Samuel Thibault <samuel.thibault@labri.fr>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220307223126.djzvg44v2o2jkjsx@begin
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fullmesh flag mustn't be used with the signal flag when adding an
address. This patch added the necessary flags check for this case.
Fixes: 73c762c1f07d ("mptcp: set fullmesh flag in pm_netlink")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The address ID selection for MPJ subflows created in response
to incoming ADD_ADDR option is currently unreliable: it happens
at MPJ socket creation time, when the local address could be
unknown.
Additionally, if the no local endpoint is available for the local
address, a new dummy endpoint is created, confusing the user-land.
This change refactor the code to move the address ID selection inside
the rebuild_header() helper, when the local address eventually
selected by the route lookup is finally known. If the address used
is not mapped by any endpoint - and thus can't be advertised/removed
pick the id 0 instead of allocate a new endpoint.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In some edge scenarios, an MPTCP subflows can use a local address
mapped by a "implicit" endpoint created by the in-kernel path manager.
Such endpoints presence can be confusing, as it's creation is hard
to track and will prevent the later endpoint creation from the user-space
using the same address.
Define a new endpoint flag to mark implicit endpoints and allow the
user-space to replace implicit them with user-provided data at endpoint
creation time.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The in-kernel MPTCP path manager, when processing the MPTCP_PM_CMD_FLUSH_ADDR
command, generates RM_ADDR events for each known local address. While that
is allowed by the RFC, it makes unpredictable the exact number of RM_ADDR
generated when both ends flush the PM addresses.
This change restricts the RM_ADDR generation to previously explicitly
announced addresses, and adjust the expected results in a bunch of related
self-tests.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set subflow->data_avail with the enum value MPTCP_SUBFLOW_NODATA, instead
of using 0 directly.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The tracepoint in get_mapping_status() only dumped the incoming mpext
fields. This patch added a new tracepoint in mptcp_sendmsg_frag() to dump
the outgoing mpext too.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This was a prerequisite for the ill-fated
"netfilter: nat: force port remap to prevent shadowing well-known ports".
As this has been reverted, this change can be backed out too.
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
This reverts commit 878aed8db324bec64f3c3f956e64d5ae7375a5de.
This change breaks existing setups where conntrack is used with
asymmetric paths.
In these cases, the NAT transformation occurs on the syn-ack instead of
the syn:
1. SYN x:12345 -> y -> 443 // sent by initiator, receiverd by responder
2. SYNACK y:443 -> x:12345 // First packet seen by conntrack, as sent by responder
3. tuple_force_port_remap() gets called, sees:
'tcp from 443 to port 12345 NAT' -> pick a new source port, inititor receives
4. SYNACK y:$RANDOM -> x:12345 // connection is never established
While its possible to avoid the breakage with NOTRACK rules, a kernel
update should not break working setups.
An alternative to the revert is to augment conntrack to tag
mid-stream connections plus more code in the nat core to skip NAT
for such connections, however, this leads to more interaction/integration
between conntrack and NAT.
Therefore, revert, users will need to add explicit nat rules to avoid
port shadowing.
Link: https://lore.kernel.org/netfilter-devel/20220302105908.GA5852@breakpoint.cc/#R
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2051413
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
In this situation (VLAN filtering disabled on br0):
br0.10
/
br0
/ \
swp0 swp1
When a frame is transmitted from the VLAN upper, the bridge will send
it down to one of the switch ports with forward offloading
enabled. This will cause tag_dsa to generate a FORWARD tag. Before
this change, that tag would have it's VID set to 10, even though VID
10 is not loaded in the VTU.
Before the blamed commit, the frame would trigger a VTU miss and be
forwarded according to the PVT configuration. Now that all fabric
ports are in 802.1Q secure mode, the frame is dropped instead.
Therefore, restrict the condition under which we rewrite an 802.1Q tag
to a DSA tag. On standalone port's, reuse is always safe since we will
always generate FROM_CPU tags in that case. For bridged ports though,
we must ensure that VLAN filtering is enabled, which in turn
guarantees that the VID in question is loaded into the VTU.
Fixes: d352b20f4174 ("net: dsa: mv88e6xxx: Improve multichip isolation of standalone ports")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220307110548.812455-1-tobias@waldekranz.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The clang static analyzer reports this issue
rtnetlink.c:5481:2: warning: Undefined or garbage
value returned to caller
return err;
^~~~~~~~~~
There is a function level err variable, in the
list_for_each_entry_rcu block there is a shadow
err. Remove the shadow.
In the same block, the call to nla_nest_start_noflag()
can fail without setting an err. Set the err
to -EMSGSIZE.
Fixes: 216e690631f5 ("net: rtnetlink: rtnl_fill_statsinfo(): Permit non-EMSGSIZE error returns")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clang static analysis reports this representative issue
dsa.c:486:2: warning: Undefined or garbage value
returned to caller
return err;
^~~~~~~~~~
err is only set in the loop. If the loop is empty,
garbage will be returned. So initialize err to 0
to handle this noop case.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The esp tunnel GSO handlers use skb_mac_gso_segment to
push the inner packet to the segmentation handlers.
However, skb_mac_gso_segment takes the Ethernet Protocol
ID from 'skb->protocol' which is wrong for inter address
family tunnels. We fix this by introducing a new
skb_eth_gso_segment function.
This function can be used if it is necessary to pass the
Ethernet Protocol ID directly to the segmentation handler.
First users of this function will be the esp4 and esp6
tunnel segmentation handlers.
Fixes: c35fe4106b92 ("xfrm: Add mode handlers for IPsec on layer 2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The xfrm{4,6}_beet_gso_segment() functions did not correctly set the
SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 gso types for the address family
tunneling case. Fix this by setting these gso types.
Fixes: 384a46ea7bdc7 ("esp4: add gso_segment for esp4 beet mode")
Fixes: 7f9e40eb18a99 ("esp6: add gso_segment for esp6 beet mode")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The maximum message size that can be send is bigger than
the maximum site that skb_page_frag_refill can allocate.
So it is possible to write beyond the allocated buffer.
Fix this by doing a fallback to COW in that case.
v2:
Avoid get get_order() costs as suggested by Linus Torvalds.
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Reported-by: valis <sec@valis.email>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
kernel test robot reports multiple warning for smc_sysctl:
In file included from net/smc/smc_sysctl.c:17:
>> net/smc/smc_sysctl.h:23:5: warning: no previous prototype \
for function 'smc_sysctl_init' [-Wmissing-prototypes]
int smc_sysctl_init(void)
^
and
>> WARNING: modpost: vmlinux.o(.text+0x12ced2d): Section mismatch \
in reference from the function smc_sysctl_exit() to the variable
.init.data:smc_sysctl_ops
The function smc_sysctl_exit() references
the variable __initdata smc_sysctl_ops.
This is often because smc_sysctl_exit lacks a __initdata
annotation or the annotation of smc_sysctl_ops is wrong.
and
net/smc/smc_sysctl.c: In function 'smc_sysctl_init_net':
net/smc/smc_sysctl.c:47:17: error: 'struct netns_smc' has no member named 'smc_hdr'
47 | net->smc.smc_hdr = register_net_sysctl(net, "net/smc", table);
Since we don't need global sysctl initialization. To make things
clean and simple, remove the global pernet_operations and
smc_sysctl_{init|exit}. Call smc_sysctl_net_{init|exit} directly
from smc_net_{init|exit}.
Also initialized sysctl_autocorking_size if CONFIG_SYSCTL it not
set, this make sure SMC autocorking is enabled by default if
CONFIG_SYSCTL is not set.
Fixes: 462791bbfa35 ("net/smc: add sysctl interface for SMC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eliminate the follow smatch warning:
net/bridge/netfilter/nf_conntrack_bridge.c:385 nf_ct_bridge_confirm()
warn: inconsistent indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
