summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2022-03-20netfilter: nft_osf: track register operationsPablo Neira Ayuso
Allow to recycle the previous output of the OS fingerprint expression if flags and ttl are the same. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-20netfilter: nft_numgen: cancel register trackingPablo Neira Ayuso
Random and increment are stateful, each invocation results in fresh output. Cancel register tracking for these two expressions. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-20netfilter: nft_meta: extend reduce support to bridge familyFlorian Westphal
its enough to export the meta get reduce helper and then call it from nft_meta_bridge too. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-20netfilter: nft_lookup: only cancel tracking for clobbered dregsFlorian Westphal
In most cases, nft_lookup will be read-only, i.e. won't clobber registers. In case of map, we need to cancel the registers that will see stores. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-20netfilter: nft_ct: track register operationsPablo Neira Ayuso
Check if the destination register already contains the data that this ct expression performs. This allows to skip this redundant operation. If the destination contains a different selector, update the register tracking information. Export nft_expr_reduce_bitwise as a symbol since nft_ct might be compiled as a module. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-20netfilter: nf_tables: cancel tracking for clobbered destination registersPablo Neira Ayuso
Output of expressions might be larger than one single register, this might clobber existing data. Reset tracking for all destination registers that required to store the expression output. This patch adds three new helper functions: - nft_reg_track_update: cancel previous register tracking and update it. - nft_reg_track_cancel: cancel any previous register tracking info. - __nft_reg_track_cancel: cancel only one single register tracking info. Partial register clobbering detection is also supported by checking the .num_reg field which describes the number of register that are used. This patch updates the following expressions: - meta_bridge - bitwise - byteorder - meta - payload to use these helper functions. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-20netfilter: nf_tables: do not reduce read-only expressionsPablo Neira Ayuso
Skip register tracking for expressions that perform read-only operations on the registers. Define and use a cookie pointer NFT_REDUCE_READONLY to avoid defining stubs for these expressions. This patch re-enables register tracking which was disabled in ed5f85d42290 ("netfilter: nf_tables: disable register tracking"). Follow up patches add remaining register tracking for existing expressions. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-20netfilter: conntrack: Add and use nf_ct_set_auto_assign_helper_warned()Phil Sutter
The function sets the pernet boolean to avoid the spurious warning from nf_ct_lookup_helper() when assigning conntrack helpers via nftables. Fixes: 1a64edf54f55 ("netfilter: nft_ct: add helper set support") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-19netfilter: conntrack: revisit gc autotuningFlorian Westphal
as of commit 4608fdfc07e1 ("netfilter: conntrack: collect all entries in one cycle") conntrack gc was changed to run every 2 minutes. On systems where conntrack hash table is set to large value, most evictions happen from gc worker rather than the packet path due to hash table distribution. This causes netlink event overflows when events are collected. This change collects average expiry of scanned entries and reschedules to the average remaining value, within 1 to 60 second interval. To avoid event overflows, reschedule after each bucket and add a limit for both run time and number of evictions per run. If more entries have to be evicted, reschedule and restart 1 jiffy into the future. Reported-by: Karel Rericha <karel@maxtel.cz> Cc: Shmulik Ladkani <shmulik.ladkani@gmail.com> Cc: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-19Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/David S. Miller
ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2022-03-19 1) Delete duplicated functions that calls same xfrm_api_check. From Leon Romanovsky. 2) Align userland API of the default policy structure to the internal structures. From Nicolas Dichtel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-18af_netlink: Fix shift out of bounds in group mask calculationPetr Machata
When a netlink message is received, netlink_recvmsg() fills in the address of the sender. One of the fields is the 32-bit bitfield nl_groups, which carries the multicast group on which the message was received. The least significant bit corresponds to group 1, and therefore the highest group that the field can represent is 32. Above that, the UB sanitizer flags the out-of-bounds shift attempts. Which bits end up being set in such case is implementation defined, but it's either going to be a wrong non-zero value, or zero, which is at least not misleading. Make the latter choice deterministic by always setting to 0 for higher-numbered multicast groups. To get information about membership in groups >= 32, userspace is expected to use nl_pktinfo control messages[0], which are enabled by NETLINK_PKTINFO socket option. [0] https://lwn.net/Articles/147608/ The way to trigger this issue is e.g. through monitoring the BRVLAN group: # bridge monitor vlan & # ip link add name br type bridge Which produces the following citation: UBSAN: shift-out-of-bounds in net/netlink/af_netlink.c:162:19 shift exponent 32 is too large for 32-bit type 'int' Fixes: f7fa9b10edbb ("[NETLINK]: Support dynamic number of multicast groups per netlink family") Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/2bef6aabf201d1fc16cca139a744700cff9dcb04.1647527635.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18Merge tag 'for-net-next-2022-03-18' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add support for Asus TF103C - Add support for Realtek RTL8852B - Add support for Realtek RTL8723BE - Add WBS support to mt7921s * tag 'for-net-next-2022-03-18' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (24 commits) Bluetooth: ath3k: remove superfluous header files Bluetooth: bcm203x: remove superfluous header files Bluetooth: hci_bcm: Add the Asus TF103C to the bcm_broken_irq_dmi_table Bluetooth: mt7921s: Add WBS support Bluetooth: mt7921s: Add .btmtk_get_codec_config_data Bluetooth: mt7921s: Add .get_data_path_id Bluetooth: mt7921s: Set HCI_QUIRK_VALID_LE_STATES Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt Bluetooth: btmtkuart: fix error handling in mtk_hci_wmt_sync() Bluetooth: call hci_le_conn_failed with hdev lock in hci_le_conn_failed Bluetooth: Send AdvMonitor Dev Found for all matched devices Bluetooth: msft: Clear tracked devices on resume Bluetooth: fix incorrect nonblock bitmask in bt_sock_wait_ready() Bluetooth: Don't assign twice the same value Bluetooth: btrtl: Add support for RTL8852B Bluetooth: hci_uart: add missing NULL check in h5_enqueue Bluetooth: Fix use after free in hci_send_acl Bluetooth: btusb: Use quirk to skip HCI_FLT_CLEAR_ALL on fake CSR controllers Bluetooth: hci_sync: Add a new quirk to skip HCI_FLT_CLEAR_ALL Bluetooth: btmtkuart: fix the conflict between mtk and msft vendor event ... ==================== Link: https://lore.kernel.org/r/20220318224752.1477292-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18mptcp: send ADD_ADDR echo before create subflowsYonglong Li
In some corner cases, the peer handing an incoming ADD_ADDR option, can receive a retransmitted ADD_ADDR for the same address before the subflow creation completes. We can avoid the above issue by generating and sending the ADD_ADDR echo before starting the MPJ subflow connection. This slightly changes the behaviour of the packetdrill tests as the ADD_ADDR echo packet is sent earlier. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/20220317221444.426335-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18mptcp: Fix crash due to tcp_tsorted_anchor was initialized before release skbYonglong Li
Got crash when doing pressure test of mptcp: =========================================================================== dst_release: dst:ffffa06ce6e5c058 refcnt:-1 kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle kernel paging request at ffffa06ce6e5c058 PGD 190a01067 P4D 190a01067 PUD 43fffb067 PMD 22e403063 PTE 8000000226e5c063 Oops: 0011 [#1] SMP PTI CPU: 7 PID: 7823 Comm: kworker/7:0 Kdump: loaded Tainted: G E Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.2.1 04/01/2014 Call Trace: ? skb_release_head_state+0x68/0x100 ? skb_release_all+0xe/0x30 ? kfree_skb+0x32/0xa0 ? mptcp_sendmsg_frag+0x57e/0x750 ? __mptcp_retrans+0x21b/0x3c0 ? __switch_to_asm+0x35/0x70 ? mptcp_worker+0x25e/0x320 ? process_one_work+0x1a7/0x360 ? worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 ? kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ? ret_from_fork+0x35/0x40 =========================================================================== In __mptcp_alloc_tx_skb skb was allocated and skb->tcp_tsorted_anchor will be initialized, in under memory pressure situation sk_wmem_schedule will return false and then kfree_skb. In this case skb->_skb_refdst is not null because_skb_refdst and tcp_tsorted_anchor are stored in the same mem, and kfree_skb will try to release dst and cause crash. Fixes: f70cad1085d1 ("mptcp: stop relying on tcp_tx_skb_cache") Reviewed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/20220317220953.426024-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18ipv4: Fix route lookups when handling ICMP redirects and PMTU updatesGuillaume Nault
The PMTU update and ICMP redirect helper functions initialise their fl4 variable with either __build_flow_key() or build_sk_flow_key(). These initialisation functions always set ->flowi4_scope with RT_SCOPE_UNIVERSE and might set the ECN bits of ->flowi4_tos. This is not a problem when the route lookup is later done via ip_route_output_key_hash(), which properly clears the ECN bits from ->flowi4_tos and initialises ->flowi4_scope based on the RTO_ONLINK flag. However, some helpers call fib_lookup() directly, without sanitising the tos and scope fields, so the route lookup can fail and, as a result, the ICMP redirect or PMTU update aren't taken into account. Fix this by extracting the ->flowi4_tos and ->flowi4_scope sanitisation code into ip_rt_fix_tos(), then use this function in handlers that call fib_lookup() directly. Note 1: We can't sanitise ->flowi4_tos and ->flowi4_scope in a central place (like __build_flow_key() or flowi4_init_output()), because ip_route_output_key_hash() expects non-sanitised values. When called with sanitised values, it can erroneously overwrite RT_SCOPE_LINK with RT_SCOPE_UNIVERSE in ->flowi4_scope. Therefore we have to be careful to sanitise the values only for those paths that don't call ip_route_output_key_hash(). Note 2: The problem is mostly about sanitising ->flowi4_tos. Having ->flowi4_scope initialised with RT_SCOPE_UNIVERSE instead of RT_SCOPE_LINK probably wasn't really a problem: sockets with the SOCK_LOCALROUTE flag set (those that'd result in RTO_ONLINK being set) normally shouldn't receive ICMP redirects or PMTU updates. Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18af_unix: Remove unnecessary brackets around CONFIG_AF_UNIX_OOB.Kuniyuki Iwashima
Let's remove unnecessary brackets around CONFIG_AF_UNIX_OOB. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Link: https://lore.kernel.org/r/20220317032308.65372-1-kuniyu@amazon.co.jp Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18net: set default rss queues num to physical cores / 2Íñigo Huguet
Network drivers can call to netif_get_num_default_rss_queues to get the default number of receive queues to use. Right now, this default number is min(8, num_online_cpus()). Instead, as suggested by Jakub, use the number of physical cores divided by 2 as a way to avoid wasting CPU resources and to avoid using both CPU threads, but still allowing to scale for high-end processors with many cores. As an exception, select 2 queues for processors with 2 cores, because otherwise it won't take any advantage of RSS despite being SMP capable. Tested: Processor Intel Xeon E5-2620 (2 sockets, 6 cores/socket, 2 threads/core). NIC Broadcom NetXtreme II BCM57810 (10GBps). Ran some tests with `perf stat iperf3 -R`, with parallelisms of 1, 8 and 24, getting the following results: - Number of queues: 6 (instead of 8) - Network throughput: not affected - CPU usage: utilized 0.05-0.12 CPUs more than before (having 24 CPUs this is only 0.2-0.5% higher) - Reduced the number of context switches by 7-50%, being more noticeable when using a higher number of parallel threads. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Link: https://lore.kernel.org/r/20220315091832.13873-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf 2022-03-18 We've added 2 non-merge commits during the last 18 day(s) which contain a total of 2 files changed, 50 insertions(+), 20 deletions(-). The main changes are: 1) Fix a race in XSK socket teardown code that can lead to a NULL pointer dereference, from Magnus. 2) Small MAINTAINERS doc update to remove Lorenz from sockmap, from Lorenz. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xsk: Fix race at socket teardown bpf: Remove Lorenz Bauer from L7 BPF maintainers ==================== Link: https://lore.kernel.org/r/20220318152418.28638-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18Bluetooth: call hci_le_conn_failed with hdev lock in hci_le_conn_failedNiels Dossche
hci_le_conn_failed function's documentation says that the caller must hold hdev->lock. The only callsite that does not hold that lock is hci_le_conn_failed. The other 3 callsites hold the hdev->lock very locally. The solution is to hold the lock during the call to hci_le_conn_failed. Fixes: 3c857757ef6e ("Bluetooth: Add directed advertising support through connect()") Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: Send AdvMonitor Dev Found for all matched devicesManish Mandlik
When an Advertisement Monitor is configured with SamplingPeriod 0xFF, the controller reports only one adv report along with the MSFT Monitor Device event. When an advertiser matches multiple monitors, some controllers send one adv report for each matched monitor; whereas, some controllers send just one adv report for all matched monitors. In such a case, report Adv Monitor Device Found event for each matched monitor. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: msft: Clear tracked devices on resumeManish Mandlik
Clear already tracked devices on system resume. Once the monitors are reregistered after resume, matched devices in range will be found again. Signed-off-by: Manish Mandlik <mmandlik@google.com> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: fix incorrect nonblock bitmask in bt_sock_wait_ready()Gavin Li
Callers pass msg->msg_flags as flags, which contains MSG_DONTWAIT instead of O_NONBLOCK. Signed-off-by: Gavin Li <gavin@matician.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: Don't assign twice the same valueChristophe JAILLET
data.pid is set twice with the same value. Remove one of these redundant calls. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: Fix use after free in hci_send_aclLuiz Augusto von Dentz
This fixes the following trace caused by receiving HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without first checking if conn->type is in fact AMP_LINK and in case it is do properly cleanup upper layers with hci_disconn_cfm: ================================================================== BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50 Read of size 8 at addr ffff88800e404818 by task bluetoothd/142 CPU: 0 PID: 142 Comm: bluetoothd Not tainted 5.17.0-rc5-00006-gda4022eeac1a #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x1f/0x150 kasan_report.cold+0x7f/0x11b hci_send_acl+0xaba/0xc50 l2cap_do_send+0x23f/0x3d0 l2cap_chan_send+0xc06/0x2cc0 l2cap_sock_sendmsg+0x201/0x2b0 sock_sendmsg+0xdc/0x110 sock_write_iter+0x20f/0x370 do_iter_readv_writev+0x343/0x690 do_iter_write+0x132/0x640 vfs_writev+0x198/0x570 do_writev+0x202/0x280 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RSP: 002b:00007ffce8a099b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RDX: 0000000000000001 RSI: 00007ffce8a099e0 RDI: 0000000000000015 RAX: ffffffffffffffda RBX: 00007ffce8a099e0 RCX: 00007f788fc3cf77 R10: 00007ffce8af7080 R11: 0000000000000246 R12: 000055e4ccf75580 RBP: 0000000000000015 R08: 0000000000000002 R09: 0000000000000001 </TASK> R13: 000055e4ccf754a0 R14: 000055e4ccf75cd0 R15: 000055e4ccf4a6b0 Allocated by task 45: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 hci_chan_create+0x9a/0x2f0 l2cap_conn_add.part.0+0x1a/0xdc0 l2cap_connect_cfm+0x236/0x1000 le_conn_complete_evt+0x15a7/0x1db0 hci_le_conn_complete_evt+0x226/0x2c0 hci_le_meta_evt+0x247/0x450 hci_event_packet+0x61b/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 Freed by task 45: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0xfb/0x130 kfree+0xac/0x350 hci_conn_cleanup+0x101/0x6a0 hci_conn_del+0x27e/0x6c0 hci_disconn_phylink_complete_evt+0xe0/0x120 hci_event_packet+0x812/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff88800c0f0500 The buggy address is located 24 bytes inside of which belongs to the cache kmalloc-128 of size 128 The buggy address belongs to the page: 128-byte region [ffff88800c0f0500, ffff88800c0f0580) flags: 0x100000000000200(slab|node=0|zone=1) page:00000000fe45cd86 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xc0f0 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 raw: 0100000000000200 ffffea00003a2c80 dead000000000004 ffff8880078418c0 page dumped because: kasan: bad access detected ffff88800c0f0400: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc Memory state around the buggy address: >ffff88800c0f0500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800c0f0480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800c0f0580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ================================================================== ffff88800c0f0600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Reported-by: Sönke Huster <soenke.huster@eknoes.de> Tested-by: Sönke Huster <soenke.huster@eknoes.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: hci_sync: Add a new quirk to skip HCI_FLT_CLEAR_ALLIsmael Ferreras Morezuelas
Some controllers have problems with being sent a command to clear all filtering. While the HCI code does not unconditionally send a clear-all anymore at BR/EDR setup (after the state machine refactor), there might be more ways of hitting these codepaths in the future as the kernel develops. Cc: stable@vger.kernel.org Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: mgmt: remove redundant assignment to variable cur_lenColin Ian King
Variable cur_len is being ininitialized with a value in the start of a for-loop but this is never read, it is being re-assigned a new value on the first statement in the for-loop. The initialization is redundant and can be removed. Cleans up clang scan build warning: net/bluetooth/mgmt.c:7958:14: warning: Although the value stored to 'cur_len' is used in the enclosing expression, the value is never actually read from 'cur_len' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Merge tag 'wireless-next-2022-03-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v5.18 Third set of patches for v5.18. Smaller set this time, support for mt7921u and some work on MBSSID support. Also a workaround for rfkill userspace event. Major changes: mac80211 * MBSSID beacon handling in AP mode rfkill * make new event layout opt-in to workaround buggy user space rtlwifi * support On Networks N150 device id mt76 * mt7915: MBSSID and 6 GHz band support * new driver mt7921u ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-18af_unix: Support POLLPRI for OOB.Kuniyuki Iwashima
The commit 314001f0bf92 ("af_unix: Add OOB support") introduced OOB for AF_UNIX, but it lacks some changes for POLLPRI. Let's add the missing piece. In the selftest, normal datagrams are sent followed by OOB data, so this commit replaces `POLLIN | POLLPRI` with just `POLLPRI` in the first test case. Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-18af_unix: Fix some data-races around unix_sk(sk)->oob_skb.Kuniyuki Iwashima
Out-of-band data automatically places a "mark" showing wherein the sequence the out-of-band data would have been. If the out-of-band data implies cancelling everything sent so far, the "mark" is helpful to flush them. When the socket's read pointer reaches the "mark", the ioctl() below sets a non zero value to the arg `atmark`: The out-of-band data is queued in sk->sk_receive_queue as well as ordinary data and also saved in unix_sk(sk)->oob_skb. It can be used to test if the head of the receive queue is the out-of-band data meaning the socket is at the "mark". While testing that, unix_ioctl() reads unix_sk(sk)->oob_skb locklessly. Thus, all accesses to oob_skb need some basic protection to avoid load/store tearing which KCSAN detects when these are called concurrently: - ioctl(fd_a, SIOCATMARK, &atmark, sizeof(atmark)) - send(fd_b_connected_to_a, buf, sizeof(buf), MSG_OOB) BUG: KCSAN: data-race in unix_ioctl / unix_stream_sendmsg write to 0xffff888003d9cff0 of 8 bytes by task 175 on cpu 1: unix_stream_sendmsg (net/unix/af_unix.c:2087 net/unix/af_unix.c:2191) sock_sendmsg (net/socket.c:705 net/socket.c:725) __sys_sendto (net/socket.c:2040) __x64_sys_sendto (net/socket.c:2048) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113) read to 0xffff888003d9cff0 of 8 bytes by task 176 on cpu 0: unix_ioctl (net/unix/af_unix.c:3101 (discriminator 1)) sock_do_ioctl (net/socket.c:1128) sock_ioctl (net/socket.c:1242) __x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:874 fs/ioctl.c:860 fs/ioctl.c:860) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113) value changed: 0xffff888003da0c00 -> 0xffff888003da0d00 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 176 Comm: unix_race_oob_i Not tainted 5.17.0-rc5-59529-g83dc4c2af682 #12 Hardware name: Red Hat KVM, BIOS 1.11.0-2.amzn2 04/01/2014 Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-18rfkill: make new event layout opt-inJohannes Berg
Again new complaints surfaced that we had broken the ABI here, although previously all the userspace tools had agreed that it was their mistake and fixed it. Yet now there are cases (e.g. RHEL) that want to run old userspace with newer kernels, and thus are broken. Since this is a bit of a whack-a-mole thing, change the whole extensibility scheme of rfkill to no longer just rely on the message lengths, but instead require userspace to opt in via a new ioctl to a given maximum event size that it is willing to understand. By default, set that to RFKILL_EVENT_SIZE_V1 (8), so that the behaviour for userspace not calling the ioctl will look as if it's just running on an older kernel. Fixes: 14486c82612a ("rfkill: add a reason to the HW rfkill state") Cc: stable@vger.kernel.org # 5.11+ Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220316212749.16491491b270.Ifcb1950998330a596f29a2a162e00b7546a1d6d0@changeid
2022-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix PPPoE and QinQ with flowtable inet family. 2) Missing register validation in nf_tables. 3) Initialize registers to avoid stack memleak to userspace. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-18xfrm: rework default policy structureNicolas Dichtel
This is a follow up of commit f8d858e607b2 ("xfrm: make user policy API complete"). The goal is to align userland API to the internal structures. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-03-17net: dsa: pass extack to dsa_switch_ops :: port_mirror_add()Vladimir Oltean
Drivers might have error messages to propagate to user space, most common being that they support a single mirror port. Propagate the netlink extack so that they can inform user space in a verbal way of their limitations. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: dsa: Handle MST state changesTobias Waldekranz
Add the usual trampoline functionality from the generic DSA layer down to the drivers for MST state changes. When a state changes to disabled/blocking/listening, make sure to fast age any dynamic entries in the affected VLANs (those controlled by the MSTI in question). Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: dsa: Pass VLAN MSTI migration notifications to driverTobias Waldekranz
Add the usual trampoline functionality from the generic DSA layer down to the drivers for VLAN MSTI migrations. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: dsa: Validate hardware support for MSTTobias Waldekranz
When joining a bridge where MST is enabled, we validate that the proper offloading support is in place, otherwise we fallback to software bridging. When then mode is changed on a bridge in which we are members, we refuse the change if offloading is not supported. At the moment we only check for configurable learning, but this will be further restricted as we support more MST related switchdev events. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: bridge: mst: Add helper to query a port's MST stateTobias Waldekranz
This is useful for switchdev drivers who are offloading MST states into hardware. As an example, a driver may wish to flush the FDB for a port when it transitions from forwarding to blocking - which means that the previous state must be discoverable. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: bridge: mst: Add helper to check if MST is enabledTobias Waldekranz
This is useful for switchdev drivers that might want to refuse to join a bridge where MST is enabled, if the hardware can't support it. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: bridge: mst: Add helper to map an MSTI to a VID setTobias Waldekranz
br_mst_get_info answers the question: "On this bridge, which VIDs are mapped to the given MSTI?" This is useful in switchdev drivers, which might have to fan-out operations, relating to an MSTI, per VLAN. An example: When a port's MST state changes from forwarding to blocking, a driver may choose to flush the dynamic FDB entries on that port to get faster reconvergence of the network, but this should only be done in the VLANs that are managed by the MSTI in question. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: bridge: mst: Notify switchdev drivers of MST state changesTobias Waldekranz
Generate a switchdev notification whenever an MST state changes. This notification is keyed by the VLANs MSTI rather than the VID, since multiple VLANs may share the same MST instance. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: bridge: mst: Notify switchdev drivers of VLAN MSTI migrationsTobias Waldekranz
Whenever a VLAN moves to a new MSTI, send a switchdev notification so that switchdevs can track a bridge's VID to MSTI mappings. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: bridge: mst: Notify switchdev drivers of MST mode changesTobias Waldekranz
Trigger a switchdev event whenever the bridge's MST mode is enabled/disabled. This allows constituent ports to either perform any required hardware config, or refuse the change if it not supported. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: bridge: mst: Support setting and reporting MST port statesTobias Waldekranz
Make it possible to change the port state in a given MSTI by extending the bridge port netlink interface (RTM_SETLINK on PF_BRIDGE).The proposed iproute2 interface would be: bridge mst set dev <PORT> msti <MSTI> state <STATE> Current states in all applicable MSTIs can also be dumped via a corresponding RTM_GETLINK. The proposed iproute interface looks like this: $ bridge mst port msti vb1 0 state forwarding 100 state disabled vb2 0 state forwarding 100 state forwarding The preexisting per-VLAN states are still valid in the MST mode (although they are read-only), and can be queried as usual if one is interested in knowing a particular VLAN's state without having to care about the VID to MSTI mapping (in this example VLAN 20 and 30 are bound to MSTI 100): $ bridge -d vlan port vlan-id vb1 10 state forwarding mcast_router 1 20 state disabled mcast_router 1 30 state disabled mcast_router 1 40 state forwarding mcast_router 1 vb2 10 state forwarding mcast_router 1 20 state forwarding mcast_router 1 30 state forwarding mcast_router 1 40 state forwarding mcast_router 1 Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: bridge: mst: Allow changing a VLAN's MSTITobias Waldekranz
Allow a VLAN to move out of the CST (MSTI 0), to an independent tree. The user manages the VID to MSTI mappings via a global VLAN setting. The proposed iproute2 interface would be: bridge vlan global set dev br0 vid <VID> msti <MSTI> Changing the state in non-zero MSTIs is still not supported, but will be addressed in upcoming changes. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17net: bridge: mst: Multiple Spanning Tree (MST) modeTobias Waldekranz
Allow the user to switch from the current per-VLAN STP mode to an MST mode. Up to this point, per-VLAN STP states where always isolated from each other. This is in contrast to the MSTP standard (802.1Q-2018, Clause 13.5), where VLANs are grouped into MST instances (MSTIs), and the state is managed on a per-MSTI level, rather that at the per-VLAN level. Perhaps due to the prevalence of the standard, many switching ASICs are built after the same model. Therefore, add a corresponding MST mode to the bridge, which we can later add offloading support for in a straight-forward way. For now, all VLANs are fixed to MSTI 0, also called the Common Spanning Tree (CST). That is, all VLANs will follow the port-global state. Upcoming changes will make this actually useful by allowing VLANs to be mapped to arbitrary MSTIs and allow individual MSTI states to be changed. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17vlan: use correct format charactersBill Wendling
When compiling with -Wformat, clang emits the following warning: net/8021q/vlanproc.c:284:22: warning: format specifies type 'unsigned short' but the argument has type 'int' [-Wformat] mp->priority, ((mp->vlan_qos >> 13) & 0x7)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ The types of these arguments are unconditionally defined, so this patch updates the format character to the correct ones for ints and unsigned ints. Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Bill Wendling <morbo@google.com> Link: https://lore.kernel.org/r/20220316213125.2353370-1-morbo@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-17veth: Rework veth_xdp_rcv_skb in order to accept non-linear skbLorenzo Bianconi
Introduce veth_convert_skb_to_xdp_buff routine in order to convert a non-linear skb into a xdp buffer. If the received skb is cloned or shared, veth_convert_skb_to_xdp_buff will copy it in a new skb composed by order-0 pages for the linear and the fragmented area. Moreover veth_convert_skb_to_xdp_buff guarantees we have enough headroom for xdp. This is a preliminary patch to allow attaching xdp programs with frags support on veth devices. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/8d228b106bc1903571afd1d77e797bffe9a5ea7c.1646989407.git.lorenzo@kernel.org
2022-03-17netfilter: nf_tables: initialize registers in nft_do_chain()Pablo Neira Ayuso
Initialize registers to avoid stack leak into userspace. Fixes: 96518518cc41 ("netfilter: add nftables") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-17netfilter: nf_tables: validate registers coming from userspace.Pablo Neira Ayuso
Bail out in case userspace uses unsupported registers. Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
generated by cgit (git 2.34.1) at 2025-09-22 00:21:14 +0000