| Age | Commit message (Collapse) | Author |
|---|
|
mr_fill_mroute() uses standard rcu_read_unlock(),
no need to grab mrt_lock anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ip_mr_forward() uses standard RCU protection already.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rcu_read_lock() protection is good enough.
ipmr_cache_unresolved() uses a dedicated spinlock (mfc_unres_lock)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rcu_read_lock() protection is good enough.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rcu_read_lock() protection is more than enough.
vif_dev_read() supports either mrt_lock or rcu_read_lock().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ipmr_cache_report() first argument can be marked const, and we change
the caller convention about which lock needs to be held.
Instead of read_lock(&mrt_lock), we can use rcu_read_lock().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
igmpmsg_netlink_event() first argument can be marked const.
igmpmsg_netlink_event() reads mrt->net and mrt->id,
both being set once in mr_table_alloc().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We will soon use RCU instead of rwlock in ipmr & ip6mr
This preliminary patch adds proper rcu verbs to read/write
(struct vif_device)->dev
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
pim6_rcv() is called under rcu_read_lock(), there is
no need to use dev_hold()/dev_put() pair.
IPv4 side was handled in commit 55747a0a73ea
("ipmr: __pim_rcv() is called under rcu_read_lock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Functions xfrm_register_km and xfrm_unregister_km do always return 0,
change the type of functions to void.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
syzbot reported uninit-value in tcp_recvmsg() [1]
Issue here is that msg->msg_get_inq should have been cleared,
otherwise tcp_recvmsg() might read garbage and perform
more work than needed, or have undefined behavior.
Given CONFIG_INIT_STACK_ALL_ZERO=y is probably going to be
the default soon, I chose to change __sys_recvfrom() to clear
all fields but msghdr.addr which might be not NULL.
For __copy_msghdr_from_user(), I added an explicit clear
of kmsg->msg_get_inq.
[1]
BUG: KMSAN: uninit-value in tcp_recvmsg+0x6cf/0xb60 net/ipv4/tcp.c:2557
tcp_recvmsg+0x6cf/0xb60 net/ipv4/tcp.c:2557
inet_recvmsg+0x13a/0x5a0 net/ipv4/af_inet.c:850
sock_recvmsg_nosec net/socket.c:995 [inline]
sock_recvmsg net/socket.c:1013 [inline]
__sys_recvfrom+0x696/0x900 net/socket.c:2176
__do_sys_recvfrom net/socket.c:2194 [inline]
__se_sys_recvfrom net/socket.c:2190 [inline]
__x64_sys_recvfrom+0x122/0x1c0 net/socket.c:2190
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Local variable msg created at:
__sys_recvfrom+0x81/0x900 net/socket.c:2154
__do_sys_recvfrom net/socket.c:2194 [inline]
__se_sys_recvfrom net/socket.c:2190 [inline]
__x64_sys_recvfrom+0x122/0x1c0 net/socket.c:2190
CPU: 0 PID: 3493 Comm: syz-executor170 Not tainted 5.19.0-rc3-syzkaller-30868-g4b28366af7d9 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: f94fd25cb0aa ("tcp: pass back data left in socket after receive")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Alexander Potapenko<glider@google.com>
Link: https://lore.kernel.org/r/20220622150220.1091182-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
"mlx" Devicetree vendor prefix is not documented and instead "mellanox"
should be used.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220622115416.7400-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the check for required and optional functions in a struct
tcp_congestion_ops from bpf_tcp_ca.c. Rely on
tcp_register_congestion_control() to reject a BPF CC that does not
implement all required functions, as it will do for a non-BPF CC.
When a CC implements tcp_congestion_ops.cong_control(), the alternate
cong_avoid() is not in use in the TCP stack. Previously, a BPF CC was
still forced to implement cong_avoid() as a no-op since it was
non-optional in bpf_tcp_ca.c.
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220622191227.898118-3-jthinz@mailbox.tu-berlin.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A CC that implements tcp_congestion_ops.cong_control() should be able to
control sk_pacing_rate and set sk_pacing_status, since
tcp_update_pacing_rate() is never called in this case. A built-in CC or
one from a kernel module is already able to write to both struct sock
members. For a BPF program, write access has not been allowed, yet.
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220622191227.898118-2-jthinz@mailbox.tu-berlin.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- netfilter: cttimeout: fix slab-out-of-bounds read in
cttimeout_net_exit
Current release - new code bugs:
- bpf: ftrace: keep address offset in ftrace_lookup_symbols
- bpf: force cookies array to follow symbols sorting
Previous releases - regressions:
- ipv4: ping: fix bind address validity check
- tipc: fix use-after-free read in tipc_named_reinit
- eth: veth: add updating of trans_start
Previous releases - always broken:
- sock: redo the psock vs ULP protection check
- netfilter: nf_dup_netdev: fix skb_under_panic
- bpf: fix request_sock leak in sk lookup helpers
- eth: igb: fix a use-after-free issue in igb_clean_tx_ring
- eth: ice: prohibit improper channel config for DCB
- eth: at803x: fix null pointer dereference on AR9331 phy
- eth: virtio_net: fix xdp_rxq_info bug after suspend/resume
Misc:
- eth: hinic: replace memcpy() with direct assignment"
* tag 'net-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: openvswitch: fix parsing of nw_proto for IPv6 fragments
sock: redo the psock vs ULP protection check
Revert "net/tls: fix tls_sk_proto_close executed repeatedly"
virtio_net: fix xdp_rxq_info bug after suspend/resume
igb: Make DMA faster when CPU is active on the PCIe link
net: dsa: qca8k: reduce mgmt ethernet timeout
net: dsa: qca8k: reset cpu port on MTU change
MAINTAINERS: Add a maintainer for OCP Time Card
hinic: Replace memcpy() with direct assignment
Revert "drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.c"
net: phy: smsc: Disable Energy Detect Power-Down in interrupt mode
ice: ethtool: Prohibit improper channel config for DCB
ice: ethtool: advertise 1000M speeds properly
ice: Fix switchdev rules book keeping
ice: ignore protocol field in GTP offload
netfilter: nf_dup_netdev: add and use recursion counter
netfilter: nf_dup_netdev: do not push mac header a second time
selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh
net/tls: fix tls_sk_proto_close executed repeatedly
erspan: do not assume transport header is always set
...
|
|
When a packet enters the OVS datapath and does not match any existing
flows installed in the kernel flow cache, the packet will be sent to
userspace to be parsed, and a new flow will be created. The kernel and
OVS rely on each other to parse packet fields in the same way so that
packets will be handled properly.
As per the design document linked below, OVS expects all later IPv6
fragments to have nw_proto=44 in the flow key, so they can be correctly
matched on OpenFlow rules. OpenFlow controllers create pipelines based
on this design.
This behavior was changed by the commit in the Fixes tag so that
nw_proto equals the next_header field of the last extension header.
However, there is no counterpart for this change in OVS userspace,
meaning that this field is parsed differently between OVS and the
kernel. This is a problem because OVS creates actions based on what is
parsed in userspace, but the kernel-provided flow key is used as a match
criteria, as described in Documentation/networking/openvswitch.rst. This
leads to issues such as packets incorrectly matching on a flow and thus
the wrong list of actions being applied to the packet. Such changes in
packet parsing cannot be implemented without breaking the userspace.
The offending commit is partially reverted to restore the expected
behavior.
The change technically made sense and there is a good reason that it was
implemented, but it does not comply with the original design of OVS.
If in the future someone wants to implement such a change, then it must
be user-configurable and disabled by default to preserve backwards
compatibility with existing OVS versions.
Cc: stable@vger.kernel.org
Fixes: fa642f08839b ("openvswitch: Derive IP protocol number for IPv6 later frags")
Link: https://docs.openvswitch.org/en/latest/topics/design/#fragments
Signed-off-by: Rosemarie O'Riorden <roriorden@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20220621204845.9721-1-roriorden@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 8a59f9d1e3d4 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()")
has moved the inet_csk_has_ulp(sk) check from sk_psock_init() to
the new tcp_bpf_update_proto() function. I'm guessing that this
was done to allow creating psocks for non-inet sockets.
Unfortunately the destruction path for psock includes the ULP
unwind, so we need to fail the sk_psock_init() itself.
Otherwise if ULP is already present we'll notice that later,
and call tcp_update_ulp() with the sk_proto of the ULP
itself, which will most likely result in the ULP looping
its callbacks.
Fixes: 8a59f9d1e3d4 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220620191353.1184629-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 69135c572d1f84261a6de2a1268513a7e71753e2.
This commit was just papering over the issue, ULP should not
get ->update() called with its own sk_prot. Each ULP would
need to add this check.
Fixes: 69135c572d1f ("net/tls: fix tls_sk_proto_close executed repeatedly")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20220620191353.1184629-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
saddr and daddr are set but not used.
Fixes: ba44f8182ec2 ("raw: use more conventional iterators")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220622032303.159394-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
unix_table_locks are to protect the global hash table, unix_socket_table.
The previous commit removed it, so let's clean up the unnecessary locks.
Here is a test result on EC2 c5.9xlarge where 10 processes run concurrently
in different netns and bind 100,000 sockets for each.
without this series : 1m 38s
with this series : 11s
It is ~10x faster because the global hash table is split into 10 netns in
this case.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit replaces the global hash table with a per-netns one and removes
the global one.
We now link a socket in each netns's hash table so we can save some netns
comparisons when iterating through a hash bucket.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit adds extra spin_lock/spin_unlock() for a per-netns
hash table inside the existing ones for unix_table_locks.
As of this commit, sockets are still linked in the global hash
table. After putting sockets in a per-netns hash table and
removing the old one in the next patch, we remove the global
locks in the last patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit adds a per netns hash table for AF_UNIX, which size is fixed
as UNIX_HASH_SIZE for now.
The first implementation defines a per-netns hash table as a single array
of lock and list:
struct unix_hashbucket {
spinlock_t lock;
struct hlist_head head;
};
struct netns_unix {
struct unix_hashbucket *hash;
...
};
But, Eric pointed out memory cost that the structure has holes because of
sizeof(spinlock_t), which is 4 (or more if LOCKDEP is enabled). [0] It
could be expensive on a host with thousands of netns and few AF_UNIX
sockets. For this reason, a per-netns hash table uses two dense arrays.
struct unix_table {
spinlock_t *locks;
struct hlist_head *buckets;
};
struct netns_unix {
struct unix_table table;
...
};
Note the length of the list has a significant impact rather than lock
contention, so having shared locks can be an option. But, per-netns
locks and lists still perform better than the global locks and per-netns
lists. [1]
Also, this patch adds a change so that struct netns_unix disappears from
struct net if CONFIG_UNIX is disabled.
[0]: https://lore.kernel.org/netdev/CANn89iLVxO5aqx16azNU7p7Z-nz5NrnM5QTqOzueVxEnkVTxyg@mail.gmail.com/
[1]: https://lore.kernel.org/netdev/20220617175215.1769-1-kuniyu@amazon.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the size of AF_UNIX hash table is UNIX_HASH_SIZE * 2,
the first half for bind()ed sockets and the second half for unbound
ones. UNIX_HASH_SIZE * 2 is used to define the table and iterate
over it.
In some places, we use ARRAY_SIZE(unix_socket_table) instead of
UNIX_HASH_SIZE * 2. However, we cannot use it anymore because we
will allocate the hash table dynamically. Then, we would have to
add UNIX_HASH_SIZE * 2 in many places, which would be troublesome.
This patch adapts the UNIX_HASH_SIZE definition to include bound
and unbound sockets and defines a new UNIX_HASH_MOD macro to ease
calculations.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some functions define a net pointer only for one-shot use. Others call
sock_net() redundantly even when a net pointer is available. Let's fix
these and make the code simpler.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Use get_random_u32() instead of prandom_u32_state() in nft_meta
and nft_numgen, from Florian Westphal.
2) Incorrect list head in nfnetlink_cttimeout in recent update coming
from previous development cycle. Also from Florian.
3) Incorrect path to pktgen scripts for nft_concat_range.sh selftest.
From Jie2x Zhou.
4) Two fixes for the for nft_fwd and nft_dup egress support, from Florian.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_dup_netdev: add and use recursion counter
netfilter: nf_dup_netdev: do not push mac header a second time
selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh
netfilter: cttimeout: fix slab-out-of-bounds read typo in cttimeout_net_exit
netfilter: use get_random_u32 instead of prandom
====================
Link: https://lore.kernel.org/r/20220621085618.3975-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
raw_diag_dump() can use rcu_read_lock() instead of read_lock()
Now the hashinfo lock is only used from process context,
in write mode only, we can convert it to a spinlock,
and we do not need to block BH anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220620100509.3493504-1-eric.dumazet@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Now that the egress function can be called from egress hook, we need
to avoid recursive calls into the nf_tables traverser, else crash.
Fixes: f87b9464d152 ("netfilter: nft_fwd_netdev: Support egress hook")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Eric reports skb_under_panic when using dup/fwd via bond+egress hook.
Before pushing mac header, we should make sure that we're called from
ingress to put back what was pulled earlier.
In egress case, the MAC header is already there; we should leave skb
alone.
While at it be more careful here: skb might have been altered and
headroom reduced, so add a skb_cow() before so that headroom is
increased if necessary.
nf_do_netdev_egress() assumes skb ownership (it normally ends with
a call to dev_queue_xmit), so we must free the packet on error.
Fixes: f87b9464d152 ("netfilter: nft_fwd_netdev: Support egress hook")
Reported-by: Eric Garver <eric@garver.life>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We always allocate skmsg with kzalloc(), so there is no need
to call memset(0) on it, the only thing we need from
sk_msg_init() is sg_init_marker(). So introduce a new helper
which is just kzalloc()+sg_init_marker(), this saves an
unncessary memset(0) for skmsg on fast path.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220615162014.89193-5-xiyou.wangcong@gmail.com
|
|
With ->read_skb() now we have an entire skb dequeued from
receive queue, now we just need to grab an addtional refcnt
before passing its ownership to recv actors.
And we should not touch them any more, particularly for
skb->sk. Fortunately, skb->sk is already set for most of
the protocols except UDP where skb->sk has been stolen,
so we have to fix it up for UDP case.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220615162014.89193-4-xiyou.wangcong@gmail.com
|
|
Currently both splice() and sockmap use ->read_sock() to
read skb from receive queue, but for sockmap we only read
one entire skb at a time, so ->read_sock() is too conservative
to use. Introduce a new proto_ops ->read_skb() which supports
this sematic, with this we can finally pass the ownership of
skb to recv actors.
For non-TCP protocols, all ->read_sock() can be simply
converted to ->read_skb().
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220615162014.89193-3-xiyou.wangcong@gmail.com
|
|
This patch inroduces tcp_read_skb() based on tcp_read_sock(),
a preparation for the next patch which actually introduces
a new sock ops.
TCP is special here, because it has tcp_read_sock() which is
mainly used by splice(). tcp_read_sock() supports partial read
and arbitrary offset, neither of them is needed for sockmap.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220615162014.89193-2-xiyou.wangcong@gmail.com
|
|
The MLO links used for connection with an MLD AP are decided by the
driver in case of SME offloaded to driver.
Add support for the drivers to indicate the information of links used
for MLO connection in connect and roam callbacks, update the connected
links information in wdev from connect/roam result sent by driver.
Also, send the connected links information to userspace.
Add a netlink flag attribute to indicate that userspace supports
handling of MLO connection. Drivers must not do MLO connection when this
flag is not set. This is to maintain backwards compatibility with older
supplicant versions which doesn't have support for MLO connection.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When retrieving scan data, expose not just whether or not the
interface (possibly an MLD) is associated to the BSS or not,
but also on which link ID if it is an MLD.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When getting/dumping an interface, expose information about
valid links.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We should set the STA deflink addresses in case no
link is really added.
Fixes: 046d2e7c50e3 ("mac80211: prepare sta handling for MLO support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Maintain a hash table of link-sta addresses so we can find
them for management frames etc. where addresses haven't
been replaced by the drivers to the MLD address yet.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We need to be able to access these in a race-free way under
traffic while adding/removing them, so RCU-ify the pointers.
This requires passing a link_sta to a lot of functions so
we don't have to do the RCU handling everywhere.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Hardcoding link[0] is more confusing than using deflink,
so use deflink for now, which requires making the macro
a bit safer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is only used in rx.c, so move it into the file.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Pass the link id through to the get_beacon and return
the beacon for a specific link id.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In start_ap and stop_ap mac80211 callbacks pass the link_id
to the drivers.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use link and link_conf according to the link_id
provided by cfg in start_ap/stop_ap and change_beacon.
Also use them in the functions called by them.
Note that for a non MLD device, the link_id is 0,
and link[0] and link_conf[0] equal to deflink and
bss_conf respectively (what was there before).
Also, call vif_info_change for BSS related changes (SSID), and
link_info_change for LINK related changes (instead of the
legacy bss_info_change).
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When a link is added or removed via nl80211, these are
called. Implement them so we don't have to check in all
the different per-link commands whether we've already
created the necessary datastructures.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add some optional callbacks for link add/remove so that
drivers can react here. Initially, I thought it would be
sufficient to just create the link in start_ap etc., but
it turns out that's not so simple, since there are quite
a few callbacks that can be called: if they're erroneously
without start_ap, things might crash.
Thus it might be easier for drivers to allocate all the
necessary data structures immediately, to not have to
worry about it in each callback, since cfg80211 checks
that the link ID is valid (has been added.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We wanted to have this sorted by direction (to/from driver),
but didn't maintain that well. Sort the file now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add the necessary infrastructure, including a new driver
method, to add/remove links to/from a station. To do this,
refactor the link alloc/free a bit, splitting that so we
can do it without linking them, to handle failures better.
Note that a station entry must be created representing an
MLD or a non-MLD STA, it cannot change between the two.
When representing an MLD, the 'deflink' is used for the
first link, which might be removed later, in which case
the memory isn't reused.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Take a few bits out of the control.flags to add the link ID
to TX frame metadata, so drivers don't need to look it up
by the address themselves. Implement that lookup where it's
needed, for internal frame TX, and set it to "unspecified"
for data transmissions.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
