summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2021-02-03net: use indirect call helpers for dst_outputBrian Vazquez
This patch avoids the indirect call for the common case: ip6_output and ip_output Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03net: use indirect call helpers for dst_inputBrian Vazquez
This patch avoids the indirect call for the common case: ip_local_deliver and ip6_input Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-03Bluetooth: Fix crash in mgmt_add_adv_patterns_monitor_completeHoward Chung
If hci_add_adv_monitor is a pending command(e.g. forward to msft_add_monitor_pattern), it is possible that mgmt_add_adv_patterns_monitor_complete gets called before cmd->user_data gets set, which will cause a crash when we try to get the moniter handle through cmd->user_data in mgmt_add_adv_patterns_monitor_complete. This moves the cmd->user_data assignment earlier than hci_add_adv_monitor. RIP: 0010:mgmt_add_adv_patterns_monitor_complete+0x82/0x187 [bluetooth] Code: 1e bf 03 00 00 00 be 52 00 00 00 4c 89 ea e8 9e e4 02 00 49 89 c6 48 85 c0 0f 84 06 01 00 00 48 89 5d b8 4c 89 fb 4d 8b 7e 30 <41> 0f b7 47 18 66 89 45 c0 45 84 e4 75 5a 4d 8b 56 28 48 8d 4d c8 RSP: 0018:ffffae81807dbcb8 EFLAGS: 00010286 RAX: ffff91c4bdf723c0 RBX: 0000000000000000 RCX: ffff91c4e5da5b80 RDX: ffff91c405680000 RSI: 0000000000000052 RDI: ffff91c49d654c00 RBP: ffffae81807dbd00 R08: ffff91c49fb157e0 R09: ffff91c49fb157e0 R10: 000000000002a4f0 R11: ffffffffc0819cfd R12: 0000000000000000 R13: ffff91c405680000 R14: ffff91c4bdf723c0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff91c4ea300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 0000000133612002 CR4: 00000000003606e0 Call Trace: ? msft_le_monitor_advertisement_cb+0x111/0x141 [bluetooth] hci_event_packet+0x425e/0x631c [bluetooth] ? printk+0x59/0x73 ? __switch_to_asm+0x41/0x70 ? msft_le_set_advertisement_filter_enable_cb+0xa6/0xa6 [bluetooth] ? bt_dbg+0xb4/0xbb [bluetooth] ? __switch_to_asm+0x41/0x70 hci_rx_work+0x101/0x319 [bluetooth] process_one_work+0x257/0x506 worker_thread+0x10d/0x284 kthread+0x14c/0x154 ? process_one_work+0x506/0x506 ? kthread_blkcg+0x2c/0x2c ret_from_fork+0x1f/0x40 Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-02-02inet: do not export inet_gro_{receive|complete}Eric Dumazet
inet_gro_receive() and inet_gro_complete() are part of GRO engine which can not be modular. Similarly, inet_gso_segment() does not need to be exported, being part of GSO stack. In other words, net/ipv6/ip6_offload.o is part of vmlinux, regardless of CONFIG_IPV6. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20210202154145.1568451-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02Merge tag 'mac80211-next-for-net-next-2021-02-02' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time, only RTNL locking reduction fallout. - cfg80211_dev_rename() requires RTNL - cfg80211_change_iface() and cfg80211_set_encryption() require wiphy mutex (was missing in wireless extensions) - cfg80211_destroy_ifaces() requires wiphy mutex - netdev registration can fail due to notifiers, and then notifiers are "unrolled", need to handle this properly * tag 'mac80211-next-for-net-next-2021-02-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: cfg80211: fix netdev registration deadlock cfg80211: call cfg80211_destroy_ifaces() with wiphy lock held wext: call cfg80211_set_encryption() with wiphy lock held wext: call cfg80211_change_iface() with wiphy lock held nl80211: call cfg80211_dev_rename() under RTNL ==================== Link: https://lore.kernel.org/r/20210202144106.38207-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02mptcp: add the mibs for ADD_ADDR with portGeliang Tang
This patch adds the mibs for ADD_ADDR with port: MPTCP_MIB_PORTADD for received ADD_ADDR suboption with a port number. MPTCP_MIB_PORTSYNRX, MPTCP_MIB_PORTSYNACKRX, MPTCP_MIB_PORTACKRX, for received MP_JOIN's SYN or SYN/ACK or ACK with a port number which is different from the msk's port number. MPTCP_MIB_MISMATCHPORTSYNRX and MPTCP_MIB_MISMATCHPORTACKRX, for received SYN or ACK MP_JOIN with a mismatched port-number. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02mptcp: deal with MPTCP_PM_ADDR_ATTR_PORT in PM netlinkGeliang Tang
This patch adds MPTCP_PM_ADDR_ATTR_PORT filling and parsing in PM netlink. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02mptcp: enable use_port when invoke addresses_equalGeliang Tang
When dealing with the addresses list local_addr_list or anno_list, we should enable the function addresses_equal's parameter use_port. And enable it in address_zero too. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02mptcp: add port number check for MP_JOINGeliang Tang
This patch adds two new helpers, subflow_use_different_sport and subflow_use_different_dport, to check whether the subflow's source or destination port number is different from the msk's port number. When receiving the MP_JOIN's SYN/SYNACK/ACK, we do these port number checks and print out the different port numbers. And furthermore, when receiving the MP_JOIN's SYN/ACK, we also use a new helper mptcp_pm_sport_in_anno_list to check whether this port number is announced. If it isn't, we need to abort this connection. This patch also populates the local address's port field in local_address. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02mptcp: add a new helper subflow_req_create_thmacGeliang Tang
This patch adds a new helper named subflow_req_create_thmac, which is extracted from subflow_token_join_request. It initializes subflow_req's local_nonce and thmac fields, those are the more expensive to populate. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02mptcp: drop unused skb in subflow_token_join_requestGeliang Tang
This patch drops the unused parameter skb in subflow_token_join_request. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02mptcp: create the listening socket for new portGeliang Tang
This patch creates a listening socket when an address with a port-number is added by PM netlink. Then binds the new port to the socket, and listens for new connections. When the address is removed or the addresses are flushed by PM netlink, release the listening socket. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02mptcp: send ack for every add_addrGeliang Tang
This patch changes the sending ACK conditions for the ADD_ADDR, send an ACK packet for any ADD_ADDR, not just when ipv6 addresses or port numbers are included. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/139 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02mptcp: create subflow or signal addr for newly added addressGeliang Tang
Currently, when a new MPTCP endpoint is added, the existing MPTCP sockets are not affected. This patch implements a new function mptcp_nl_add_subflow_or_signal_addr, invoked when an address is added from PM netlink. This function traverses the MPTCP sockets list and invokes mptcp_pm_create_subflow_or_signal_addr to try to create a subflow or signal an address for the newly added address, if local constraint allows that. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/19 Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02mptcp: drop *_max fields in mptcp_pm_dataGeliang Tang
This patch drops the per-msk values add_addr_signal_max, add_addr_accept_max, local_addr_max and subflows_max fields in struct mptcp_pm_data, uses the pernet *_max values instead. And adds four new helpers to get the pernet *_max values separately. Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02mptcp: use WRITE_ONCE for the pernet *_maxGeliang Tang
This patch uses WRITE_ONCE() for all the pernet add_addr_signal_max, add_addr_accept_max, local_addr_max and subflows_max fields in struct pm_nl_pernet to avoid concurrency issues. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02net: ipv6: Emit notification when fib hardware flags are changedAmit Cohen
After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. It is also possible for a route already installed in hardware to change its action and therefore its flags. For example, a host route that is trapping packets can be "promoted" to perform decapsulation following the installation of an IPinIP/VXLAN tunnel. Emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed. The aim is to provide an indication to user-space (e.g., routing daemons) about the state of the route in hardware. Introduce a sysctl that controls this behavior. Keep the default value at 0 (i.e., do not emit notifications) for several reasons: - Multiple RTM_NEWROUTE notification per-route might confuse existing routing daemons. - Convergence reasons in routing daemons. - The extra notifications will negatively impact the insertion rate. - Not all users are interested in these notifications. Move fib6_info_hw_flags_set() to C file because it is no longer a short function. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02net: ipv4: Emit notification when fib hardware flags are changedAmit Cohen
After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. It is also possible for a route already installed in hardware to change its action and therefore its flags. For example, a host route that is trapping packets can be "promoted" to perform decapsulation following the installation of an IPinIP/VXLAN tunnel. Emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed. The aim is to provide an indication to user-space (e.g., routing daemons) about the state of the route in hardware. Introduce a sysctl that controls this behavior. Keep the default value at 0 (i.e., do not emit notifications) for several reasons: - Multiple RTM_NEWROUTE notification per-route might confuse existing routing daemons. - Convergence reasons in routing daemons. - The extra notifications will negatively impact the insertion rate. - Not all users are interested in these notifications. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Acked-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02net: ipv4: Publish fib_nlmsg_size()Amit Cohen
Publish fib_nlmsg_size() to allow it to be used later on from fib_alias_hw_flags_set(). Remove the inline keyword since it shouldn't be used inside C files. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02net: ipv4: Pass fib_rt_info as const to fib_dump_info()Amit Cohen
fib_dump_info() does not change 'fri', so pass it as 'const'. It will later allow us to invoke fib_dump_info() from fib_alias_hw_flags_set(). Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02net: fix up truesize of cloned skb in skb_prepare_for_shift()Marco Elver
Avoid the assumption that ksize(kmalloc(S)) == ksize(kmalloc(S)): when cloning an skb, save and restore truesize after pskb_expand_head(). This can occur if the allocator decides to service an allocation of the same size differently (e.g. use a different size class, or pass the allocation on to KFENCE). Because truesize is used for bookkeeping (such as sk_wmem_queued), a modified truesize of a cloned skb may result in corrupt bookkeeping and relevant warnings (such as in sk_stream_kill_queues()). Link: https://lkml.kernel.org/r/X9JR/J6dMMOy1obu@elver.google.com Reported-by: syzbot+7b99aafdcc2eedea6178@syzkaller.appspotmail.com Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210201160420.2826895-1-elver@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02mptcp: fix length of MP_PRIO suboptionDavide Caratti
With version 0 of the protocol it was legal to encode the 'Subflow Id' in the MP_PRIO suboption, to specify which subflow would change its 'Backup' flag. This has been removed from v1 specification: thus, according to RFC 8684 §3.3.8, the resulting 'Length' for MP_PRIO changed from 4 to 3 byte. Current Linux generates / parses MP_PRIO according to the old spec, using 'Length' equal to 4, and hardcoding 1 as 'Subflow Id'; RFC compliance can improve if we change 'Length' in other to become 3, leaving a 'Nop' after the MP_PRIO suboption. In this way the kernel will emit and accept *only* MP_PRIO suboptions that are compliant to version 1 of the MPTCP protocol. unpatched 5.11-rc kernel: [root@bottarga ~]# tcpdump -tnnr unpatched.pcap | grep prio reading from file unpatched.pcap, link-type LINUX_SLL (Linux cooked v1) dropped privs to tcpdump IP 10.0.3.2.48433 > 10.0.1.1.10006: Flags [.], ack 1, win 502, options [nop,nop,TS val 4032325513 ecr 1876514270,mptcp prio non-backup id 1,mptcp dss ack 14084896651682217737], length 0 patched 5.11-rc kernel: [root@bottarga ~]# tcpdump -tnnr patched.pcap | grep prio reading from file patched.pcap, link-type LINUX_SLL (Linux cooked v1) dropped privs to tcpdump IP 10.0.3.2.49735 > 10.0.1.1.10006: Flags [.], ack 1, win 502, options [nop,nop,TS val 1276737699 ecr 2686399734,mptcp prio non-backup,nop,mptcp dss ack 18433038869082491686], length 0 Changes since v2: - when accounting for option space, don't increment 'TCPOLEN_MPTCP_PRIO' and use 'TCPOLEN_MPTCP_PRIO_ALIGN' instead, thanks to Matthieu Baerts. Changes since v1: - refactor patch to avoid using 'TCPOLEN_MPTCP_PRIO' with its old value, thanks to Geliang Tang. Fixes: 067065422fcd ("mptcp: add the outgoing MP_PRIO support") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Matteo Croce <mcroce@linux.microsoft.com> Link: https://lore.kernel.org/r/846cdd41e6ad6ec88ef23fee1552ab39c2f5a3d1.1612184361.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02Merge tag 'net-5.11-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.11-rc7, including fixes from bpf and mac80211 trees. Current release - regressions: - ip_tunnel: fix mtu calculation - mlx5: fix function calculation for page trees Previous releases - regressions: - vsock: fix the race conditions in multi-transport support - neighbour: prevent a dead entry from updating gc_list - dsa: mv88e6xxx: override existent unicast portvec in port_fdb_add Previous releases - always broken: - bpf, cgroup: two copy_{from,to}_user() warn_on_once splats for BPF cgroup getsockopt infra when user space is trying to race against optlen, from Loris Reiff. - bpf: add missing fput() in BPF inode storage map update helper - udp: ipv4: manipulate network header of NATed UDP GRO fraglist - mac80211: fix station rate table updates on assoc - r8169: work around RTL8125 UDP HW bug - igc: report speed and duplex as unknown when device is runtime suspended - rxrpc: fix deadlock around release of dst cached on udp tunnel" * tag 'net-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits) net: hsr: align sup_multicast_addr in struct hsr_priv to u16 boundary net: ipa: fix two format specifier errors net: ipa: use the right accessor in ipa_endpoint_status_skip() net: ipa: be explicit about endianness net: ipa: add a missing __iomem attribute net: ipa: pass correct dma_handle to dma_free_coherent() r8169: fix WoL on shutdown if CONFIG_DEBUG_SHIRQ is set net/rds: restrict iovecs length for RDS_CMSG_RDMA_ARGS net: mvpp2: TCAM entry enable should be written after SRAM data net: lapb: Copy the skb before sending a packet net/mlx5e: Release skb in case of failure in tc update skb net/mlx5e: Update max_opened_tc also when channels are closed net/mlx5: Fix leak upon failure of rule creation net/mlx5: Fix function calculation for page trees docs: networking: swap words in icmp_errors_use_inbound_ifaddr doc udp: ipv4: manipulate network header of NATed UDP GRO fraglist net: ip_tunnel: fix mtu calculation vsock: fix the race conditions in multi-transport support net: sched: replaced invalid qdisc tree flush helper in qdisc_replace ibmvnic: device remove has higher precedence over reset ...
2021-02-02net: hsr: align sup_multicast_addr in struct hsr_priv to u16 boundaryAndreas Oetken
sup_multicast_addr is passed to ether_addr_equal for address comparison which casts the address inputs to u16 leading to an unaligned access. Aligning the sup_multicast_addr to u16 boundary fixes the issue. Signed-off-by: Andreas Oetken <andreas.oetken@siemens.com> Link: https://lore.kernel.org/r/20210202090304.2740471-1-ennoerlangen@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02net/rds: restrict iovecs length for RDS_CMSG_RDMA_ARGSSabyrzhan Tasbolatov
syzbot found WARNING in rds_rdma_extra_size [1] when RDS_CMSG_RDMA_ARGS control message is passed with user-controlled 0x40001 bytes of args->nr_local, causing order >= MAX_ORDER condition. The exact value 0x40001 can be checked with UIO_MAXIOV which is 0x400. So for kcalloc() 0x400 iovecs with sizeof(struct rds_iovec) = 0x10 is the closest limit, with 0x10 leftover. Same condition is currently done in rds_cmsg_rdma_args(). [1] WARNING: mm/page_alloc.c:5011 [..] Call Trace: alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2267 alloc_pages include/linux/gfp.h:547 [inline] kmalloc_order+0x2e/0xb0 mm/slab_common.c:837 kmalloc_order_trace+0x14/0x120 mm/slab_common.c:853 kmalloc_array include/linux/slab.h:592 [inline] kcalloc include/linux/slab.h:621 [inline] rds_rdma_extra_size+0xb2/0x3b0 net/rds/rdma.c:568 rds_rm_size net/rds/send.c:928 [inline] Reported-by: syzbot+1bd2b07f93745fa38425@syzkaller.appspotmail.com Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Link: https://lore.kernel.org/r/20210201203233.1324704-1-snovitoll@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02net: lapb: Copy the skb before sending a packetXie He
When sending a packet, we will prepend it with an LAPB header. This modifies the shared parts of a cloned skb, so we should copy the skb rather than just clone it, before we prepend the header. In "Documentation/networking/driver.rst" (the 2nd point), it states that drivers shouldn't modify the shared parts of a cloned skb when transmitting. The "dev_queue_xmit_nit" function in "net/core/dev.c", which is called when an skb is being sent, clones the skb and sents the clone to AF_PACKET sockets. Because the LAPB drivers first remove a 1-byte pseudo-header before handing over the skb to us, if we don't copy the skb before prepending the LAPB header, the first byte of the packets received on AF_PACKET sockets can be corrupted. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Martin Schiller <ms@dev.tdt.de> Link: https://lore.kernel.org/r/20210201055706.415842-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02Merge tag 'mac80211-for-net-2021-02-02' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Two fixes: - station rate tables were not updated correctly after association, leading to bad configuration - rtl8723bs (staging) was initializing data incorrectly after the previous fix and needed to move the init later * tag 'mac80211-for-net-2021-02-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: staging: rtl8723bs: Move wiphy setup to after reading the regulatory settings from the chip mac80211: fix station rate table updates on assoc ==================== Link: https://lore.kernel.org/r/20210202143505.37610-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02Bluetooth: Fix null pointer dereference in amp_read_loc_assoc_final_dataGopal Tiwari
kernel panic trace looks like: #5 [ffffb9e08698fc80] do_page_fault at ffffffffb666e0d7 #6 [ffffb9e08698fcb0] page_fault at ffffffffb70010fe [exception RIP: amp_read_loc_assoc_final_data+63] RIP: ffffffffc06ab54f RSP: ffffb9e08698fd68 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8c8845a5a000 RCX: 0000000000000004 RDX: 0000000000000000 RSI: ffff8c8b9153d000 RDI: ffff8c8845a5a000 RBP: ffffb9e08698fe40 R8: 00000000000330e0 R9: ffffffffc0675c94 R10: ffffb9e08698fe58 R11: 0000000000000001 R12: ffff8c8b9cbf6200 R13: 0000000000000000 R14: 0000000000000000 R15: ffff8c8b2026da0b ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb9e08698fda8] hci_event_packet at ffffffffc0676904 [bluetooth] #8 [ffffb9e08698fe50] hci_rx_work at ffffffffc06629ac [bluetooth] #9 [ffffb9e08698fe98] process_one_work at ffffffffb66f95e7 hcon->amp_mgr seems NULL triggered kernel panic in following line inside function amp_read_loc_assoc_final_data set_bit(READ_LOC_AMP_ASSOC_FINAL, &mgr->state); Fixed by checking NULL for mgr. Signed-off-by: Gopal Tiwari <gtiwari@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-02-01udp: ipv4: manipulate network header of NATed UDP GRO fraglistDongseok Yi
UDP/IP header of UDP GROed frag_skbs are not updated even after NAT forwarding. Only the header of head_skb from ip_finish_output_gso -> skb_gso_segment is updated but following frag_skbs are not updated. A call path skb_mac_gso_segment -> inet_gso_segment -> udp4_ufo_fragment -> __udp_gso_segment -> __udp_gso_segment_list does not try to update UDP/IP header of the segment list but copy only the MAC header. Update port, addr and check of each skb of the segment list in __udp_gso_segment_list. It covers both SNAT and DNAT. Fixes: 9fd1ff5d2ac7 (udp: Support UDP fraglist GRO/GSO.) Signed-off-by: Dongseok Yi <dseok.yi@samsung.com> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Link: https://lore.kernel.org/r/1611962007-80092-1-git-send-email-dseok.yi@samsung.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01net: ip_tunnel: fix mtu calculationVadim Fedorenko
dev->hard_header_len for tunnel interface is set only when header_ops are set too and already contains full overhead of any tunnel encapsulation. That's why there is not need to use this overhead twice in mtu calc. Fixes: fdafed459998 ("ip_gre: set dev->hard_header_len and dev->needed_headroom properly") Reported-by: Slava Bacherikov <mail@slava.cc> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/1611959267-20536-1-git-send-email-vfedorenko@novek.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01vsock: fix the race conditions in multi-transport supportAlexander Popov
There are multiple similar bugs implicitly introduced by the commit c0cfa2d8a788fcf4 ("vsock: add multi-transports support") and commit 6a2c0962105ae8ce ("vsock: prevent transport modules unloading"). The bug pattern: [1] vsock_sock.transport pointer is copied to a local variable, [2] lock_sock() is called, [3] the local variable is used. VSOCK multi-transport support introduced the race condition: vsock_sock.transport value may change between [1] and [2]. Let's copy vsock_sock.transport pointer to local variables after the lock_sock() call. Fixes: c0cfa2d8a788fcf4 ("vsock: add multi-transports support") Signed-off-by: Alexander Popov <alex.popov@linux.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20210201084719.2257066-1-alex.popov@linux.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-01SUNRPC: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2021-02-01cfg80211: fix netdev registration deadlockJohannes Berg
If register_netdevice() fails after having called cfg80211's netdev notifier (cfg80211_netdev_notifier_call) it will call the notifier again with UNREGISTER. This would then lock the wiphy mutex because we're marked as registered, which causes a deadlock. Fix this by separately keeping track of whether or not we're in the middle of registering to also skip the notifier call on this unregister. Reported-by: syzbot+2ae0ca9d7737ad1a62b7@syzkaller.appspotmail.com Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Link: https://lore.kernel.org/r/20210201192048.ed8bad436737.I7cae042c44b15f80919a285799a15df467e9d42d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-02-01Bluetooth: Skip eSCO 2M params when not supportedYu Liu
If a peer device doesn't support eSCO 2M we should skip the params that use it when setting up sync connection since they will always fail. Signed-off-by: Yu Liu <yudiliu@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-02-01net: sunrpc: xprtsock.c: Corrected few spellings ,in commentsBhaskar Chowdhury
Few trivial and rudimentary spell corrections. Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2021-02-01SUNRPC: correct error code comment in xs_tcp_setup_socket()Calum Mackay
This comment was introduced by commit 6ea44adce915 ("SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()"). I believe EIO was a typo at the time: it should have been EAGAIN. Subsequently, commit 0445f92c5d53 ("SUNRPC: Fix disconnection races") changed that to ENOTCONN. Rather than trying to keep the comment here in sync with the code in xprt_force_disconnect(), make the point in a non-specific way. Fixes: 6ea44adce915 ("SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()") Signed-off-by: Calum Mackay <calum.mackay@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2021-02-01SUNRPC: Fix NFS READs that start at non-page-aligned offsetsChuck Lever
Anj Duvnjak reports that the Kodi.tv NFS client is not able to read video files from a v5.10.11 Linux NFS server. The new sendpage-based TCP sendto logic was not attentive to non- zero page_base values. nfsd_splice_read() sets that field when a READ payload starts in the middle of a page. The Linux NFS client rarely emits an NFS READ that is not page- aligned. All of my testing so far has been with Linux clients, so I missed this one. Reported-by: A. Duvnjak <avian@extremenerds.net> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211471 Fixes: 4a85a6a3320b ("SUNRPC: Handle TCP socket sends with kernel_sendpage() again") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: A. Duvnjak <avian@extremenerds.net>
2021-02-01mac80211: fix station rate table updates on assocFelix Fietkau
If the driver uses .sta_add, station entries are only uploaded after the sta is in assoc state. Fix early station rate table updates by deferring them until the sta has been uploaded. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20210201083324.3134-1-nbd@nbd.name [use rcu_access_pointer() instead since we won't dereference here] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-31Merge tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds
Pull NFS client fixes from Trond Myklebust: - SUNRPC: Handle 0 length opaque XDR object data properly - Fix a layout segment leak in pnfs_layout_process() - pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn - pNFS/NFSv4: Improve rejection of out-of-order layouts - pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process() * tag 'nfs-for-5.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Handle 0 length opaque XDR object data properly SUNRPC: Move simple_get_bytes and simple_get_netobj into private header pNFS/NFSv4: Improve rejection of out-of-order layouts pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process() pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()
2021-01-30neighbour: Prevent a dead entry from updating gc_listChinmay Agarwal
Following race condition was detected: <CPU A, t0> - neigh_flush_dev() is under execution and calls neigh_mark_dead(n) marking the neighbour entry 'n' as dead. <CPU B, t1> - Executing: __netif_receive_skb() -> __netif_receive_skb_core() -> arp_rcv() -> arp_process().arp_process() calls __neigh_lookup() which takes a reference on neighbour entry 'n'. <CPU A, t2> - Moves further along neigh_flush_dev() and calls neigh_cleanup_and_release(n), but since reference count increased in t2, 'n' couldn't be destroyed. <CPU B, t3> - Moves further along, arp_process() and calls neigh_update()-> __neigh_update() -> neigh_update_gc_list(), which adds the neighbour entry back in gc_list(neigh_mark_dead(), removed it earlier in t0 from gc_list) <CPU B, t4> - arp_process() finally calls neigh_release(n), destroying the neighbour entry. This leads to 'n' still being part of gc_list, but the actual neighbour structure has been freed. The situation can be prevented from happening if we disallow a dead entry to have any possibility of updating gc_list. This is what the patch intends to achieve. Fixes: 9c29a2f55ec0 ("neighbor: Fix locking order for gc_list changes") Signed-off-by: Chinmay Agarwal <chinagar@codeaurora.org> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210127165453.GA20514@chinagar-linux.qualcomm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29rxrpc: Fix deadlock around release of dst cached on udp tunnelDavid Howells
AF_RXRPC sockets use UDP ports in encap mode. This causes socket and dst from an incoming packet to get stolen and attached to the UDP socket from whence it is leaked when that socket is closed. When a network namespace is removed, the wait for dst records to be cleaned up happens before the cleanup of the rxrpc and UDP socket, meaning that the wait never finishes. Fix this by moving the rxrpc (and, by dependence, the afs) private per-network namespace registrations to the device group rather than subsys group. This allows cached rxrpc local endpoints to be cleared and their UDP sockets closed before we try waiting for the dst records. The symptom is that lines looking like the following: unregister_netdevice: waiting for lo to become free get emitted at regular intervals after running something like the referenced syzbot test. Thanks to Vadim for tracking this down and work out the fix. Reported-by: syzbot+df400f2f24a1677cd7e0@syzkaller.appspotmail.com Reported-by: Vadim Fedorenko <vfedorenko@novek.ru> Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/161196443016.3868642.5577440140646403533.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29net: bridge: add warning comments to avoid extending sysfsNikolay Aleksandrov
We're moving to netlink-only options, so add comments in the bridge's sysfs files to warn against adding any new sysfs entries. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29net: bridge: mcast: drop hosts limit sysfs supportNikolay Aleksandrov
We decided to stop adding new sysfs bridge options and continue with netlink only, so remove hosts limit sysfs support. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29net: dsa: add a second tagger for Ocelot switches based on tag_8021qVladimir Oltean
There are use cases for which the existing tagger, based on the NPI (Node Processor Interface) functionality, is insufficient. Namely: - Frames injected through the NPI port bypass the frame analyzer, so no source address learning is performed, no TSN stream classification, etc. - Flow control is not functional over an NPI port (PAUSE frames are encapsulated in the same Extraction Frame Header as all other frames) - There can be at most one NPI port configured for an Ocelot switch. But in NXP LS1028A and T1040 there are two Ethernet CPU ports. The non-NPI port is currently either disabled, or operated as a plain user port (albeit an internally-facing one). Having the ability to configure the two CPU ports symmetrically could pave the way for e.g. creating a LAG between them, to increase bandwidth seamlessly for the system. So there is a desire to have an alternative to the NPI mode. This change keeps the default tagger for the Seville and Felix switches as "ocelot", but it can be changed via the following device attribute: echo ocelot-8021q > /sys/class/<dsa-master>/dsa/tagging Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29net: dsa: allow changing the tag protocol via the "tagging" device attributeVladimir Oltean
Currently DSA exposes the following sysfs: $ cat /sys/class/net/eno2/dsa/tagging ocelot which is a read-only device attribute, introduced in the kernel as commit 98cdb4807123 ("net: dsa: Expose tagging protocol to user-space"), and used by libpcap since its commit 993db3800d7d ("Add support for DSA link-layer types"). It would be nice if we could extend this device attribute by making it writable: $ echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging This is useful with DSA switches that can make use of more than one tagging protocol. It may be useful in dsa_loop in the future too, to perform offline testing of various taggers, or for changing between dsa and edsa on Marvell switches, if that is desirable. In terms of implementation, drivers can support this feature by implementing .change_tag_protocol, which should always leave the switch in a consistent state: either with the new protocol if things went well, or with the old one if something failed. Teardown of the old protocol, if necessary, must be handled by the driver. Some things remain as before: - The .get_tag_protocol is currently only called at probe time, to load the initial tagging protocol driver. Nonetheless, new drivers should report the tagging protocol in current use now. - The driver should manage by itself the initial setup of tagging protocol, no later than the .setup() method, as well as destroying resources used by the last tagger in use, no earlier than the .teardown() method. For multi-switch DSA trees, error handling is a bit more complicated, since e.g. the 5th out of 7 switches may fail to change the tag protocol. When that happens, a revert to the original tag protocol is attempted, but that may fail too, leaving the tree in an inconsistent state despite each individual switch implementing .change_tag_protocol transactionally. Since the intersection between drivers that implement .change_tag_protocol and drivers that support D in DSA is currently the empty set, the possibility for this error to happen is ignored for now. Testing: $ insmod mscc_felix.ko [ 79.549784] mscc_felix 0000:00:00.5: Adding to iommu group 14 [ 79.565712] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517 $ insmod tag_ocelot.ko $ rmmod mscc_felix.ko $ insmod mscc_felix.ko [ 97.261724] libphy: VSC9959 internal MDIO bus: probed [ 97.267363] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0 [ 97.274998] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1 [ 97.282561] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2 [ 97.289700] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3 [ 97.599163] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.862034] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.950731] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode [ 97.964278] 8021q: adding VLAN 0 to HW filter on device swp0 [ 98.146161] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.238649] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode [ 98.251845] 8021q: adding VLAN 0 to HW filter on device swp1 [ 98.433916] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.485542] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode [ 98.503584] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 98.527948] device eno2 entered promiscuous mode [ 98.544755] DSA: tree 0 setup $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=2.337 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.754 ms ^C - 10.0.0.1 ping statistics - 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.754/1.545/2.337 ms $ cat /sys/class/net/eno2/dsa/tagging ocelot $ cat ./test_ocelot_8021q.sh #!/bin/bash ip link set swp0 down ip link set swp1 down ip link set swp2 down ip link set swp3 down ip link set swp5 down ip link set eno2 down echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging ip link set eno2 up ip link set swp0 up ip link set swp1 up ip link set swp2 up ip link set swp3 up ip link set swp5 up $ ./test_ocelot_8021q.sh ./test_ocelot_8021q.sh: line 9: echo: write error: Protocol not available $ rmmod tag_ocelot.ko rmmod: can't unload module 'tag_ocelot': Resource temporarily unavailable $ insmod tag_ocelot_8021q.ko $ ./test_ocelot_8021q.sh $ cat /sys/class/net/eno2/dsa/tagging ocelot-8021q $ rmmod tag_ocelot.ko $ rmmod tag_ocelot_8021q.ko rmmod: can't unload module 'tag_ocelot_8021q': Resource temporarily unavailable $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=0.953 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.787 ms 64 bytes from 10.0.0.1: seq=2 ttl=64 time=0.771 ms $ rmmod mscc_felix.ko [ 645.544426] mscc_felix 0000:00:00.5: Link is Down [ 645.838608] DSA: tree 0 torn down $ rmmod tag_ocelot_8021q.ko Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29net: dsa: keep a copy of the tagging protocol in the DSA switch treeVladimir Oltean
Cascading DSA switches can be done multiple ways. There is the brute force approach / tag stacking, where one upstream switch, located between leaf switches and the host Ethernet controller, will just happily transport the DSA header of those leaf switches as payload. For this kind of setups, DSA works without any special kind of treatment compared to a single switch - they just aren't aware of each other. Then there's the approach where the upstream switch understands the tags it transports from its leaves below, as it doesn't push a tag of its own, but it routes based on the source port & switch id information present in that tag (as opposed to DMAC & VID) and it strips the tag when egressing a front-facing port. Currently only Marvell implements the latter, and Marvell DSA trees contain only Marvell switches. So it is safe to say that DSA trees already have a single tag protocol shared by all switches, and in fact this is what makes the switches able to understand each other. This fact is also implied by the fact that currently, the tagging protocol is reported as part of a sysfs installed on the DSA master and not per port, so it must be the same for all the ports connected to that DSA master regardless of the switch that they belong to. It's time to make this official and enforce it (yes, this also means we won't have any "switch understands tag to some extent but is not able to speak it" hardware oddities that we'll support in the future). This is needed due to the imminent introduction of the dsa_switch_ops:: change_tag_protocol driver API. When that is introduced, we'll have to notify switches of the tagging protocol that they're configured to use. Currently the tag_ops structure pointer is held only for CPU ports. But there are switches which don't have CPU ports and nonetheless still need to be configured. These would be Marvell leaf switches whose upstream port is just a DSA link. How do we inform these of their tagging protocol setup/deletion? One answer to the above would be: iterate through the DSA switch tree's ports once, list the CPU ports, get their tag_ops, then iterate again now that we have it, and notify everybody of that tag_ops. But what to do if conflicts appear between one cpu_dp->tag_ops and another? There's no escaping the fact that conflict resolution needs to be done, so we can be upfront about it. Ease our work and just keep the master copy of the tag_ops inside the struct dsa_switch_tree. Reference counting is now moved to be per-tree too, instead of per-CPU port. There are many places in the data path that access master->dsa_ptr->tag_ops and we would introduce unnecessary performance penalty going through yet another indirection, so keep those right where they are. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29net: dsa: document the existing switch tree notifiers and add a new oneVladimir Oltean
The existence of dsa_broadcast has generated some confusion in the past: https://www.mail-archive.com/netdev@vger.kernel.org/msg365042.html So let's document the existing dsa_port_notify and dsa_broadcast functions and explain when each of them should be used. Also, in fact, the in-between function has always been there but was lacking a name, and is the main reason for this patch: dsa_tree_notify. Refactor dsa_broadcast to use it. This patch also moves dsa_broadcast (a top-level function) to dsa2.c, where it really belonged in the first place, but had no companion so it stood with dsa_port_notify. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29net: dsa: tag_8021q: add helpers to deduce whether a VLAN ID is RX or TX VLANVladimir Oltean
The sja1105 implementation can be blind about this, but the felix driver doesn't do exactly what it's being told, so it needs to know whether it is a TX or an RX VLAN, so it can install the appropriate type of TCAM rule. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-29net: proc: speedup /proc/net/netstatEric Dumazet
Use cache friendly helpers to better use cpu caches while reading /proc/net/netstat Tested on a platform with 256 threads (AMD Rome) Before: 305 usec spent in netstat_seq_show() After: 130 usec spent in netstat_seq_show() Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210128162145.1703601-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-11 21:03:26 +0000