| Age | Commit message (Collapse) | Author |
|---|
|
Merge Rust support for cpufreq and OPP, a new Rust-based cpufreq-dt
driver, an SCMI cpufreq driver cleanup, and an ACPI cpufreq driver
regression fix:
- Add Rust abstractions for CPUFreq framework (Viresh Kumar).
- Add Rust abstractions for OPP framework (Viresh Kumar).
- Add basic Rust abstractions for Clk and Cpumask frameworks (Viresh
Kumar).
- Clean up the SCMI cpufreq driver somewhat (Mike Tipton).
- Use KHz as the nominal_freq units in get_max_boost_ratio() in the
ACPI cpufreq driver (iGautham Shenoy).
* pm-cpufreq:
acpi-cpufreq: Fix nominal_freq units to KHz in get_max_boost_ratio()
rust: opp: Move `cfg(CONFIG_OF)` attribute to the top of doc test
rust: opp: Make the doctest example depend on CONFIG_OF
cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs
cpufreq: Add Rust-based cpufreq-dt driver
rust: opp: Extend OPP abstractions with cpufreq support
rust: cpufreq: Extend abstractions for driver registration
rust: cpufreq: Extend abstractions for policy and driver ops
rust: cpufreq: Add initial abstractions for cpufreq framework
rust: opp: Add abstractions for the configuration options
rust: opp: Add abstractions for the OPP table
rust: opp: Add initial abstractions for OPP framework
rust: cpu: Add from_cpu()
rust: macros: enable use of hyphens in module names
rust: clk: Add initial abstractions
rust: clk: Add helpers for Rust code
MAINTAINERS: Add entry for Rust cpumask API
rust: cpumask: Add initial abstractions
rust: cpumask: Add few more helpers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
|
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
|
|
Move the `#[cfg(CONFIG_OF)]` attribute to the top of the documentation test
block and hide it. This applies the condition to the entire test and improves
readability.
Placing configuration flags like `CONFIG_OF` at the top serves as a clear
indicator of the conditions under which the example is valid, effectively
acting like configuration metadata for the example itself.
Suggested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/9d93c783cc4419f16dd8942a4359d74bc0149203.1748323971.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Joel Fernandes:
- Removed swake_up_one_online() workaround
- Reverted an incorrect rcuog wake-up fix from offline softirq
- Rust RCU Guard methods marked as inline
- Updated MAINTAINERS with Joel’s and Zqiang's new email address
- Replaced magic constant in rcu_seq_done_exact() with named constant
- Added warning mechanism to validate rcu_seq_done_exact()
- Switched SRCU polling API to use rcu_seq_done_exact()
- Commented on redundant delta check in rcu_seq_done_exact()
- Made ->gpwrap tests in rcutorture more frequent
- Fixed reuse of ARM64 images in rcutorture
- rcutorture improved to check Kconfig and reader conflict handling
- Extracted logic from rcu_torture_one_read() for clarity
- Updated LWN RCU API documentation links
- Enabled --do-rt in torture.sh for CONFIG_PREEMPT_RT
- Added tests for SRCU up/down reader primitives
- Added comments and delays checks in rcutorture
- Deprecated srcu_read_lock_lite() and srcu_read_unlock_lite() via checkpatch
- Added --do-normal and --do-no-normal to torture.sh
- Added RCU Rust binding tests to torture.sh
- Reduced CPU overcommit and removed MAXSMP/CPUMASK_OFFSTACK in TREE01
- Replaced kmalloc() with kcalloc() in rcuscale
- Refined listRCU example code for stale data elimination
- Fixed hardirq count bug for x86 in cpu_stall_cputime
- Added safety checks in rcu/nocb for offloaded rdp access
- Other miscellaneous changes
* tag 'next.2025.05.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (27 commits)
rcutorture: Fix issue with re-using old images on ARM64
rcutorture: Remove MAXSMP and CPUMASK_OFFSTACK from TREE01
rcutorture: Reduce TREE01 CPU overcommit
torture: Check for "Call trace:" as well as "Call Trace:"
rcutorture: Perform more frequent testing of ->gpwrap
torture: Add testing of RCU's Rust bindings to torture.sh
torture: Add --do-{,no-}normal to torture.sh
checkpatch: Deprecate srcu_read_lock_lite() and srcu_read_unlock_lite()
rcutorture: Comment invocations of tick_dep_set_task()
rcu/nocb: Add Safe checks for access offloaded rdp
rcuscale: using kcalloc() to relpace kmalloc()
doc/RCU/listRCU: refine example code for eliminating stale data
doc: Update LWN RCU API links in whatisRCU.rst
Revert "rcu/nocb: Fix rcuog wake-up from offline softirq"
rust: sync: rcu: Mark Guard methods as inline
rcu/cpu_stall_cputime: fix the hardirq count for x86 architecture
rcu: Remove swake_up_one_online() bandaid
MAINTAINERS: Update Zqiang's email address
rcutorture: Make torture.sh --do-rt use CONFIG_PREEMPT_RT
srcu: Use rcu_seq_done_exact() for polling API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux
Pull configfs updates from Andreas Hindborg:
- Allow creation of rw files with custom permissions. This allows
drivers to better protect secrets written through configfs
- Fix a bug where an error condition did not cause an early return
while populating attributes
- Report ENOMEM rather than EFAULT when kvasprintf() fails in
config_item_set_name()
- Add a Rust API for configfs. This allows Rust drivers to use configfs
through a memory safe interface
* tag 'configfs-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux:
MAINTAINERS: add configfs Rust abstractions
rust: configfs: add a sample demonstrating configfs usage
rust: configfs: introduce rust support for configfs
configfs: Correct error value returned by API config_item_set_name()
configfs: Do not override creating attribute file failure in populate_attrs()
configfs: Delete semicolon from macro type_print() definition
configfs: Add CONFIGFS_ATTR_PERM helper
|
|
The doctest example uses a function only available for CONFIG_OF and so
the build with doc tests fails when it isn't enabled.
error[E0599]: no function or associated item named `from_of_cpumask`
found for struct `rust_doctest_kernel_alloc_kbox_rs_4::kernel::opp::Table`
in the current scope
Fix this by making the doctest depend on CONFIG_OF.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505260856.ZQWHW2xT-lkp@intel.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/a80bfedcb4d94531dc27d3b48062db5042078e88.1748237646.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pass PHY driver pointer to .match_phy_device OP in addition to phydev.
Having access to the PHY driver struct might be useful to check the
PHY ID of the driver is being matched for in case the PHY ID scanned in
the phydev is not consistent.
A scenario for this is a PHY that change PHY ID after a firmware is
loaded, in such case, the PHY ID stored in PHY device struct is not
valid anymore and PHY will manually scan the ID in the match_phy_device
function.
Having the PHY driver info is also useful for those PHY driver that
implement multiple simple .match_phy_device OP to match specific MMD PHY
ID. With this extra info if the parsing logic is the same, the matching
function can be generalized by using the phy_id in the PHY driver
instead of hardcoding.
Rust wrapper callback is updated to align to the new match_phy_device
arguments.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org> # for Rust
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM CPUFreq updates for 6.16 from Viresh Kumar:
"- Rust abstractions for CPUFreq framework (Viresh Kumar).
- Rust abstractions for OPP framework (Viresh Kumar).
- Basic Rust abstractions for Clk and Cpumask frameworks (Viresh Kumar).
- Minor cleanup to the SCMI cpufreq driver (Mike Tipton)."
* tag 'cpufreq-arm-updates-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (24 commits)
cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs
cpufreq: Add Rust-based cpufreq-dt driver
rust: opp: Extend OPP abstractions with cpufreq support
rust: cpufreq: Extend abstractions for driver registration
rust: cpufreq: Extend abstractions for policy and driver ops
rust: cpufreq: Add initial abstractions for cpufreq framework
rust: opp: Add abstractions for the configuration options
rust: opp: Add abstractions for the OPP table
rust: opp: Add initial abstractions for OPP framework
rust: cpu: Add from_cpu()
rust: macros: enable use of hyphens in module names
rust: clk: Add initial abstractions
rust: clk: Add helpers for Rust code
MAINTAINERS: Add entry for Rust cpumask API
rust: cpumask: Add initial abstractions
rust: cpumask: Add few more helpers
rust: devres: require a bound device
rust: pci: move iomap_region() to impl Device<Bound>
rust: device: implement Bound device context
rust: pci: preserve device context in AsRef
...
|
|
https://gitlab.freedesktop.org/drm/nova into drm-next
Nova changes for v6.16
auxiliary:
- bus abstractions
- implementation for driver registration
- add sample driver
drm:
- implement __drm_dev_alloc()
- DRM core infrastructure Rust abstractions
- device, driver and registration
- DRM IOCTL
- DRM File
- GEM object
- IntoGEMObject rework
- generically implement AlwaysRefCounted through IntoGEMObject
- refactor unsound from_gem_obj() into as_ref()
- refactor into_gem_obj() into as_raw()
driver-core:
- merge topic/device-context-2025-04-17 from driver-core tree
- implement Devres::access()
- fix: doctest build under `!CONFIG_PCI`
- accessor for Device::parent()
- fix: conditionally expect `dead_code` for `parent()`
- impl TryFrom<&Device> bus devices (PCI, platform)
nova-core:
- remove completed Vec extentions from task list
- register auxiliary device for nova-drm
- derive useful traits for Chipset
- add missing GA100 chipset
- take &Device<Bound> in Gpu::new()
- infrastructure to generate register definitions
- fix register layout of NV_PMC_BOOT_0
- move Firmware into own (Rust) module
- fix: select AUXILIARY_BUS
nova-drm:
- initial driver skeleton (depends on drm and auxiliary bus
abstractions)
- fix: select AUXILIARY_BUS
Rust (dependencies):
- implement Opaque::zeroed()
- implement Revocable::try_access_with()
- implement Revocable::access()
From: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/aCxAf3RqQAXLDhAj@cassiopeiae
|
|
Extend the OPP abstractions to include support for interacting with the
cpufreq core, including the ability to retrieve frequency tables from
OPP table.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Extend the cpufreq abstractions to support driver registration from
Rust.
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Extend the cpufreq abstractions to include support for policy handling
and driver operations.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Introduce initial Rust abstractions for the cpufreq core. This includes
basic representations for cpufreq flags, relation types, and the cpufreq
table.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Introduce Rust abstractions for the OPP core configuration options,
enabling safe access to various configurable aspects of the OPP
framework.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Introduce Rust abstractions for `struct opp_table`, enabling access to
OPP tables from Rust.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Introduce initial Rust abstractions for the Operating Performance Points
(OPP) framework. This includes bindings for `struct dev_pm_opp` and
`struct dev_pm_opp_data`, laying the groundwork for further OPP
integration.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
This implements cpu::from_cpu(), which returns a reference to
Device for a CPU. The C struct is created at initialization time for
CPUs and is never freed and so ARef isn't returned from this function.
The new helper will be used by Rust based cpufreq drivers.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Some modules might need naming that contains hyphens "-" to match the
auto-probing by name in the platform devices that comes from the device
tree.
But Rust identifier cannot contain hyphens, so replace them with
underscores.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
[ Viresh: Replace "-" with '-', minor commit log fix, rename variable and
fix line length checkpatch warnings ]
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add initial abstractions for the clk APIs. These provide the minimal
functionality needed for common use cases, making them straightforward
to introduce in the first iteration.
These will be used by Rust based cpufreq / OPP layers to begin with.
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Non-trivial C macros and inlined C functions cannot be used directly
in the Rust code and are used via functions ("helpers") that wrap
those so that they can be called from Rust.
In order to prepare for adding Rust abstractions for the clock APIs,
add clock helpers required by the Rust implementation.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add initial Rust abstractions for struct cpumask, covering a subset of
its APIs. Additional APIs can be added as needed.
These abstractions will be used in upcoming Rust support for cpufreq and
OPP frameworks.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
|
|
Add few more cpumask helpers that are required by the Rust abstraction.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
|
|
Currently the implementation of "Guard" methods are basically wrappers
around rcu's function within kernel. Building the kernel with llvm
18.1.8 on x86_64 machine will generate the following symbols:
$ nm vmlinux | grep ' _R'.*Guard | rustfilt
ffffffff817b6c90 T <kernel::sync::rcu::Guard>::new
ffffffff817b6cb0 T <kernel::sync::rcu::Guard>::unlock
ffffffff817b6cd0 T <kernel::sync::rcu::Guard as core::ops::drop::Drop>::drop
ffffffff817b6c90 T <kernel::sync::rcu::Guard as core::default::Default>::default
These Rust symbols are basically wrappers around functions
"rcu_read_lock" and "rcu_read_unlock". Marking them as inline can
reduce the generation of these symbols, and saves the size of code
generation for 132 bytes.
$ ./scripts/bloat-o-meter vmlinux_old vmlinux_new
(Output is demangled for readability)
add/remove: 0/10 grow/shrink: 0/1 up/down: 0/-132 (-132)
Function old new delta
rust_driver_pci::SampleDriver::probe 1041 1034 -7
kernel::sync::rcu::Guard::default 9 - -9
kernel::sync::rcu::Guard::drop 9 - -9
kernel::sync::rcu::read_lock 9 - -9
kernel::sync::rcu::Guard::unlock 9 - -9
kernel::sync::rcu::Guard::new 9 - -9
__pfx__kernel::sync::rcu::Guard::default 16 - -16
__pfx__kernel::sync::rcu::Guard::drop 16 - -16
__pfx__kernel::sync::rcu::read_lock 16 - -16
__pfx__kernel::sync::rcu::Guard::unlock 16 - -16
__pfx__kernel::sync::rcu::Guard::new 16 - -16
Total: Before=23365955, After=23365823, chg -0.00%
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
|
|
Currently we are requiring AlwaysRefCounted in most trait bounds for gem
objects, and implementing it by hand for our only current type of gem
object. However, all gem objects use the same functions for reference
counting - and all gem objects support reference counting.
We're planning on adding support for shmem gem objects, let's move this
around a bit by instead making IntoGEMObject require AlwaysRefCounted as a
trait bound, and then provide a blanket AlwaysRefCounted implementation for
any object that implements IntoGEMObject so all gem object types can use
the same AlwaysRefCounted implementation. This also makes things less
verbose by making the AlwaysRefCounted trait bound implicit for any
IntoGEMObject bound.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250513221046.903358-5-lyude@redhat.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
There's a few changes here:
* The rename, of course (this should also let us drop the clippy annotation
here)
* Return *mut bindings::drm_gem_object instead of
&Opaque<bindings::drm_gem_object> - the latter doesn't really have any
benefit and just results in conversion from the rust type to the C type
having to be more verbose than necessary.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250513221046.903358-4-lyude@redhat.com
[ Fixup s/into_gem_obj()/as_raw()/ in safety comment. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
There's a few issues with this function, mainly:
* This function -probably- should have been unsafe from the start. Pointers
are not always necessarily valid, but you want a function that does
field-projection for a pointer that can travel outside of the original
struct to be unsafe, at least if I understand properly.
* *mut Self is not terribly useful in this context, the majority of uses of
from_gem_obj() grab a *mut Self and then immediately convert it into a
&'a Self. It also goes against the ffi conventions we've set in the rest
of the kernel thus far.
* from_gem_obj() also doesn't follow the naming conventions in the rest of
the DRM bindings at the moment, as_ref() would be a better name.
So, let's:
* Make from_gem_obj() unsafe
* Convert it to return &'a Self
* Rename it to as_ref()
* Update all call locations
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250513221046.903358-3-lyude@redhat.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
There is usually not much of a reason to use a raw pointer in a data
struct, so move this to NonNull instead.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250513221046.903358-2-lyude@redhat.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add the initial nova-drm driver skeleton.
nova-drm is connected to nova-core through the auxiliary bus and
implements the DRM parts of the nova driver stack.
For now, it implements the fundamental DRM abstractions, i.e. creates a
DRM device and registers it, exposing a three sample IOCTLs.
DRM_IOCTL_NOVA_GETPARAM
- provides the PCI bar size from the bar that maps the GPUs VRAM
from nova-core
DRM_IOCTL_NOVA_GEM_CREATE
- creates a new dummy DRM GEM object and returns a handle
DRM_IOCTL_NOVA_GEM_INFO
- provides metadata for the DRM GEM object behind a given handle
I implemented a small userspace test suite [1] that utilizes this
interface.
Link: https://gitlab.freedesktop.org/dakr/drm-test [1]
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250424160452.8070-3-dakr@kernel.org
[ Kconfig: depend on DRM=y rather than just DRM. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add a Rust API for configfs, thus allowing Rust modules to use configfs for
configuration. Make the implementation a shim on top of the C configfs
implementation, allowing safe use of the C infrastructure from Rust.
Link: https://lore.kernel.org/r/20250508-configfs-v8-1-8ebde6180edc@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
|
|
The doctest requires `CONFIG_PCI`:
error[E0432]: unresolved import `kernel::pci`
--> rust/doctests_kernel_generated.rs:2689:44
|
2689 | use kernel::{device::Core, devres::Devres, pci};
| ^^^ no `pci` in the root
|
note: found an item that was configured out
--> rust/kernel/lib.rs:96:9
note: the item is gated here
--> rust/kernel/lib.rs:95:1
Thus conditionally compile it (which still checks the syntax).
Fixes: f301cb978c06 ("rust: devres: implement Devres::access()")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250511182533.1016163-1-ojeda@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Starting with Rust 1.88.0 (expected 2025-06-26) [1], `rustc` may move
back the `uninlined_format_args` to `style` from `pedantic` (it was
there waiting for rust-analyzer suppotr), and thus we will start to see
lints like:
warning: variables can be used directly in the `format!` string
--> rust/macros/kunit.rs:105:37
|
105 | let kunit_wrapper_fn_name = format!("kunit_rust_wrapper_{}", test);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#uninlined_format_args
help: change this to
|
105 - let kunit_wrapper_fn_name = format!("kunit_rust_wrapper_{}", test);
105 + let kunit_wrapper_fn_name = format!("kunit_rust_wrapper_{test}");
There is even a case that is a pure removal:
warning: variables can be used directly in the `format!` string
--> rust/macros/module.rs:51:13
|
51 | format!("{field}={content}\0", field = field, content = content)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#uninlined_format_args
help: change this to
|
51 - format!("{field}={content}\0", field = field, content = content)
51 + format!("{field}={content}\0")
The lints all seem like nice cleanups, thus just apply them.
We may want to disable `allow-mixed-uninlined-format-args` in the future.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust-clippy/pull/14160 [1]
Acked-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250502140237.1659624-6-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Starting with Rust 1.88.0 (expected 2025-06-26) [1][2], `rustc` may
introduce a new lint that catches unnecessary transmutes, e.g.:
error: unnecessary transmute
--> rust/uapi/uapi_generated.rs:23242:18
|
23242 | unsafe { ::core::mem::transmute(self._bitfield_1.get(0usize, 1u8) as u8) }
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: replace this with: `(self._bitfield_1.get(0usize, 1u8) as u8 == 1)`
|
= note: `-D unnecessary-transmutes` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(unnecessary_transmutes)]`
There are a lot of them (at least 300), but luckily they are all in
`bindgen`-generated code.
Thus clean all up by allowing it there.
Since unknown lints trigger a lint itself in older compilers, do it
conditionally so that we can keep the `unknown_lints` lint enabled.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/136083 [1]
Link: https://github.com/rust-lang/rust/issues/136067 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250502140237.1659624-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Starting with Rust 1.87.0 (expected 2025-05-15) [1], Clippy may expand
the `ptr_eq` lint, e.g.:
error: use `core::ptr::eq` when comparing raw pointers
--> rust/kernel/list.rs:438:12
|
438 | if self.first == item {
| ^^^^^^^^^^^^^^^^^^ help: try: `core::ptr::eq(self.first, item)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_eq
= note: `-D clippy::ptr-eq` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::ptr_eq)]`
It is expected that a PR to relax the lint will be backported [2] by
the time Rust 1.87.0 releases, since the lint was considered too eager
(at least by default) [3].
Thus allow the lint temporarily just in case.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust-clippy/pull/14339 [1]
Link: https://github.com/rust-lang/rust-clippy/pull/14526 [2]
Link: https://github.com/rust-lang/rust-clippy/issues/14525 [3]
Link: https://lore.kernel.org/r/20250502140237.1659624-3-ojeda@kernel.org
[ Converted to `allow`s since backport was confirmed. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Implement a direct accessor for the data stored within the Devres for
cases where we can prove that we own a reference to a Device<Bound>
(i.e. a bound device) of the same device that was used to create the
corresponding Devres container.
Usually, when accessing the data stored within a Devres container, it is
not clear whether the data has been revoked already due to the device
being unbound and, hence, we have to try whether the access is possible
and subsequently keep holding the RCU read lock for the duration of the
access.
However, when we can prove that we hold a reference to Device<Bound>
matching the device the Devres container has been created with, we can
guarantee that the device is not unbound for the duration of the
lifetime of the Device<Bound> reference and, hence, it is not possible
for the data within the Devres container to be revoked.
Therefore, in this case, we can bypass the atomic check and the RCU read
lock, which is a great optimization and simplification for drivers.
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Link: https://lore.kernel.org/r/20250428140137.468709-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Implement an unsafe direct accessor for the data stored within the
Revocable.
This is useful for cases where we can prove that the data stored within
the Revocable is not and cannot be revoked for the duration of the
lifetime of the returned reference.
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Link: https://lore.kernel.org/r/20250428140137.468709-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
When `CONFIG_AUXILIARY_BUS` is disabled, `parent()` is still dead code:
error: method `parent` is never used
--> rust/kernel/device.rs:71:19
|
64 | impl<Ctx: DeviceContext> Device<Ctx> {
| ------------------------------------ method in this implementation
...
71 | pub(crate) fn parent(&self) -> Option<&Self> {
| ^^^^^^
|
= note: `-D dead-code` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(dead_code)]`
Thus reintroduce the `expect`, but now as a conditional one. Do so as
`dead_code` since that is narrower.
An `allow` would also be possible, but Danilo wants to catch new users
in the future [1].
Link: https://lore.kernel.org/rust-for-linux/aBE8qQrpXOfru_K3@pollux/ [1]
Fixes: ce735e73dd59 ("rust: auxiliary: add auxiliary device / driver abstractions")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250429210629.513521-1-ojeda@kernel.org
[ Adjust commit subject to "rust: device: conditionally expect
`dead_code` for `parent()`". - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
DRM GEM is the DRM memory management subsystem used by most modern
drivers; add a Rust abstraction for DRM GEM.
This includes the BaseObject trait, which contains operations shared by
all GEM object classes.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-8-dakr@kernel.org
[ Rework of GEM object abstractions
* switch to the Opaque<T> type
* fix (mutable) references to struct drm_gem_object (which in this
context is UB)
* drop all custom reference types in favor of AlwaysRefCounted
* bunch of minor changes and simplifications (e.g. IntoGEMObject
trait)
* write and fix safety and invariant comments
* remove necessity for and convert 'as' casts
* original source archive: https://archive.is/dD5SL
- Danilo ]
[ Fix missing CONFIG_DRM guards in rust/helpers/drm.c. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes to resolve a number of reported
problems. Included in here are:
- driver core sync fix revert to resolve a much reported problem,
hopefully this is finally resolved
- MAINTAINERS file update, documenting that the driver-core tree is
now under a "shared" maintainership model, thanks to Rafael and
Danilo for offering to do this!
- auxbus documentation and MAINTAINERS file update
- MAINTAINERS file update for Rust PCI code
- firmware rust binding fixup
- software node link fix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'driver-core-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
drivers/base/memory: Avoid overhead from for_each_present_section_nr()
software node: Prevent link creation failure from causing kobj reference count imbalance
device property: Add a note to the fwnode.h
drivers/base: Add myself as auxiliary bus reviewer
drivers/base: Extend documentation with preferred way to use auxbus
driver core: fix potential NULL pointer dereference in dev_uevent()
driver core: introduce device_set_driver() helper
Revert "drivers: core: synchronize really_probe() and dev_uevent()"
MAINTAINERS: update the location of the driver-core git tree
rust: firmware: Use `ffi::c_char` type in `FwFunc`
MAINTAINERS: pci: add entry for Rust PCI code
|
|
A DRM File is the DRM counterpart to a kernel file structure,
representing an open DRM file descriptor.
Add a Rust abstraction to allow drivers to implement their own File types
that implement the DriverFile trait.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-7-dakr@kernel.org
[ Rework of drm::File
* switch to the Opaque<T> type
* fix (mutable) references to struct drm_file (which in this context
is UB)
* restructure and rename functions to align with common kernel
schemes
* write and fix safety and invariant comments
* remove necessity for and convert 'as' casts
* original source archive: https://archive.is/GH8oy
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Implement the DRM driver `Registration`.
The `Registration` structure is responsible to register and unregister a
DRM driver. It makes use of the `Devres` container in order to allow the
`Registration` to be owned by devres, such that it is automatically
dropped (and the DRM driver unregistered) once the parent device is
unbound.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-6-dakr@kernel.org
[ Rework of drm::Registration
* move VTABLE to drm::Device to prevent use-after-free bugs; VTABLE
needs to be bound to the lifetime of drm::Device, not the
drm::Registration
* combine new() and register() to get rid of the registered boolean
* remove file_operations
* move struct drm_device creation to drm::Device
* introduce Devres
* original source archive: https://archive.is/Pl9ys
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Implement the abstraction for a `struct drm_device`.
A `drm::Device` creates a static const `struct drm_driver` filled with
the data from the `drm::Driver` trait implementation of the actual
driver creating the `drm::Device`.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-5-dakr@kernel.org
[ Rewrite of drm::Device
* full rewrite of the drm::Device abstraction using the subclassing
pattern
* original source archive: http://archive.today/5NxBo
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Implement the DRM driver abstractions.
The `Driver` trait provides the interface to the actual driver to fill
in the driver specific data, such as the `DriverInfo`, driver features
and IOCTLs.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-4-dakr@kernel.org
[ MISC changes
* remove unnecessary DRM features; make remaining ones crate private
* add #[expect(unused)] to avoid warnings
* add sealed trait
* remove shmem::Object references
* original source archive: https://archive.is/Pl9ys
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
DRM drivers need to be able to declare which driver-specific ioctls they
support. Add an abstraction implementing the required types and a helper
macro to generate the ioctl definition inside the DRM driver.
Note that this macro is not usable until further bits of the abstraction
are in place (but it will not fail to compile on its own, if not called).
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-3-dakr@kernel.org
[ MISC fixes
* wrap raw_data in Opaque to avoid UB when creating a reference
* fix IOCTL sample declaration
* fix safety comment of IOCTL argument
* original source archive: https://archive.is/LqHDQ
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Revocable::try_access() returns a guard through which the wrapped object
can be accessed. Code that can sleep is not allowed while the guard is
held; thus, it is common for the caller to explicitly drop it before
running sleepable code, e.g:
let b = bar.try_access()?;
let reg = b.readl(...);
// Don't forget this or things could go wrong!
drop(b);
something_that_might_sleep();
let b = bar.try_access()?;
let reg2 = b.readl(...);
This is arguably error-prone. try_access_with() provides an arguably
safer alternative, by taking a closure that is run while the guard is
held, and by dropping the guard automatically after the closure
completes. This way, code can be organized more clearly around the
critical sections and the risk of forgetting to release the guard when
needed is considerably reduced:
let reg = bar.try_access_with(|b| b.readl(...))?;
something_that_might_sleep();
let reg2 = bar.try_access_with(|b| b.readl(...))?;
The closure can return nothing, or any value including a Result which is
then wrapped inside the Option returned by try_access_with. Error
management is driver-specific, so users are encouraged to create their
own macros that map and flatten the returned values to something
appropriate for the code they are working on.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250411-try_with-v4-1-f470ac79e2e2@nvidia.com
[ Link `None`, `Some`, `Option` in doc-comment. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Implement the `auxiliary::Registration` type, which provides an API to
create and register new auxiliary devices in the system.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250414131934.28418-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Implement the basic auxiliary abstractions required to implement a
driver matching an auxiliary device.
The design and implementation is analogous to PCI and platform and is
based on the generic device / driver abstractions.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250414131934.28418-4-dakr@kernel.org
[ Fix typos, `let _ =` => `drop()`, use `kernel::ffi`. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Device::parent() returns a reference to the device' parent device, if
any.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250414131934.28418-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Analogous to `Opaque::uninit` add `Opaque::zeroed`, which sets the
corresponding memory to zero. In contrast to `Opaque::uninit`, the
corresponding value, depending on its type, may be initialized.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250414131934.28418-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Implement TryFrom<&device::Device> for &Device.
This allows us to get a &platform::Device from a generic &Device in a safe
way; the conversion fails if the device' bus type does not match with
the platform bus type.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250321214826.140946-4-dakr@kernel.org
[ Support device context types, use dev_is_platform() helper. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
