summaryrefslogtreecommitdiff
path: root/sound/pci
AgeCommit message (Collapse)Author
2018-10-04ALSA: hda/sigmatel - Disable automute for Elo VuPointMichael Pobega
The Elo VuPoint 15MX has two headphone jacks of which neither work by default. Disabling automute allows ALSA to work normally with the speakers & left headphone jack. Future pin configuration changes may be required in the future to get the right headphone jack working in tandem. Signed-off-by: Michael Pobega <mpobega@neverware.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-04Merge branch 'for-linus' into for-nextTakashi Iwai
Back-merge 4.19-devel branch into 4.20 for applying FireWire patches cleanly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-04ALSA: hda/realtek - Cannot adjust speaker's volume on Dell XPS 27 7760Kai-Heng Feng
The issue is the same as commit dd9aa335c880 ("ALSA: hda/realtek - Can't adjust speaker's volume on a Dell AIO"), the output requires to connect to a node with Amp-out capability. Applying the same fixup ALC298_FIXUP_SPK_VOLUME can fix the issue. BugLink: https://bugs.launchpad.net/bugs/1775068 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-03ALSA: intel8x0: Fix fall-through annotationsGustavo A. R. Silva
Replace "fallthru" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR exit commandsConnor McAdams
This patch adds exit operations for the Sound Blaster ZxR. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR 600 ohm gain controlConnor McAdams
This patch adds a control for 600 ohm gain on the Sound Blaster ZxR. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Remove input select enum for ZxRConnor McAdams
This patch removes the input select control for the ZxR, as it only has one input option, rear microphone. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR input/output select commandsConnor McAdams
This patch adds commands for selecting input and output on the Sound Blaster ZxR. The ZxR has no front panel header, and has line-in on the separate daughter board, so it only does rear-mic. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR DSP post-download commandsConnor McAdams
This patch adds commands for setting up the ZxR after the DSP is downloaded. The ZxR already shares most of the post-download commands from the regular Sound Blaster Z. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR init commandsConnor McAdams
This patch adds init commands for the main Sound Blaster ZxR card. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add DBpro hda_codec_opsConnor McAdams
This patch adds separate hda_codec_ops for the DBPro daughter board, as it behaves more like a generic HDA codec than the other ca0132 cards, despite having a ca0132 on board. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR pincfgConnor McAdams
This patch adds a pincfg for the ZxR, and defines which pins are used for both. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Add ZxR quirks + new quirk check functionConnor McAdams
This patch adds quirk ID's for the ZxR and it's daughter board, the DBPro. It also adds a function for determining the quirk for each board through HDA subsytem ID's instead of PCI subsystem ID's. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Fix surround sound with output effectsConnor McAdams
This patch fixes an issue where if surround sound was the selected output and output effects were enabled, the sound wasn't sent to all channels correctly. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda/ca0132 - Fix AE-5 control typeConnor McAdams
This patch corrects the control type of the additional AE-5 controls added in a previous patch from HDA_INPUT to HDA_OUTPUT. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add AE-5 exit functionConnor McAdams
This patch adds exit commands for the AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add AE-5 specific controlsConnor McAdams
This patch adds controls for the AE-5's headphone gain setting, and the DAC's interpolation filter setting. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add input selection commands for AE-5Connor McAdams
This patch adds the input selection commands for the Sound BlasterX AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add output set commands for AE-5Connor McAdams
This patch adds output selection commands for the AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Clean up ca0132_alt_out_selectConnor McAdams
This patch cleans up ca0132_alt_out_select by moving the card specific output commands into a separate function. As more cards are added, the function ca0132_alt_out_select is going to get more bloated with these, so moving into a separate function tries to keep that from happening. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add DSP setup functions for AE-5Connor McAdams
This patch adds DSP setup functions for the AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Merge post-dsp functions + cleanupConnor McAdams
This patch cleans up some of the formatting of the post-dsp load setup functions, and also merges some of the sub functions into individual ones. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Change firmware name and usageConnor McAdams
The Recon3D, AE-5, Z and ZxR all share the same firmware file. Rename this from the specific "ctefx-sbz.bin" to "ctefx-desktop.bin" and set the AE-5 and Recon3D to use it as well. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add AE-5 regular init setupConnor McAdams
This patch adds AE-5 specific stuff to the ca0132_alt_init function. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add AE-5 pre-init and ca0113 functionsConnor McAdams
This patch adds AE-5 pre-init functions that happen before the main ca0132_alt_init, and gives functions related to the ca0113 a ca0113 prefix instead of ca0132. It also adds functions to write to the 8051's SFRs, and to write the special ca0113 commands for the AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Change ca0132_mmio_init for AE-5Connor McAdams
This patch adds the unique writes for the AE-5 on startup to ca0132_mmio_init. The other cards share some addresses written to, but use different values. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Set AE-5 bools and select mixerConnor McAdams
This patch sets the bool values for the AE-5, as well as selects the mixer it will use. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add pincfg for AE-5Connor McAdams
This patch adds the pincfg for the Sound BlasterX AE-5, and cleans up the function it's assigned in. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Add quirk for Sound BlasterX AE-5Connor McAdams
This patch adds the PCI subsys ID quirk for the Sound BlasterX AE-5. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda/ca0132 - Define new verbs and control paramsConnor McAdams
This patch defines some new verbs found from reverse engineering of the onboard 8051 CPU, and a control param found there as well. This clears up usage of these verbs in other parts of the driver, and removes their usage where they're now known to be unnecessary. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-14ALSA: atiixp: fix fall-through annotationsGustavo A. R. Silva
Replace "fallthru" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-13ALSA: hda - Enable runtime PM only for discrete GPUTakashi Iwai
The recent change of vga_switcheroo allowed the runtime PM for HD-audio on AMD GPUs, but this also resulted in a regression. When the HD-audio controller driver gets runtime-suspended, HD-audio link is turned off, and the hotplug notification is ignored. This leads to the inconsistent audio state (the connection isn't notified and ELD is ignored). The best fix would be to implement the proper ELD notification via the audio component, but it's still not ready. As a quick workaround, this patch adds the check of runtime_idle and allows the runtime suspend only when the vga_switcheroo is bound with discrete GPU. That is, a system with a single GPU and APU would be again without runtime PM to keep the HD-audio link for the hotplug notification and ELD read out. Also, the codec->auto_runtime_pm flag is set only for the discrete GPU at the time GPU gets bound via vga_switcheroo (i.e. only dGPU is forcibly runtime-PM enabled), so that APU can still get the ELD notification. For identifying which GPU is bound, a new vga_switcheroo client callback, gpu_bound, is implemented. The vga_switcheroo simply calls this when GPU is bound, and tells whether it's dGPU or APU. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200945 Fixes: 07f4f97d7b4b ("vga_switcheroo: Use device link for HDA controller") Reported-by: Jian-Hong Pan <jian-hong@endlessm.com> Tested-by: Jian-Hong Pan <jian-hong@endlessm.com> Acked-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-13ALSA: intel8x0m: Register irq handler after register initializationsTakashi Iwai
The interrupt handler has to be acquired after the other resource initialization when allocated with IRQF_SHARED. Otherwise it's triggered before the resource gets ready, and may lead to unpleasant behavior. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-12ALSA: hda: Fix implicit definition of pci_iomap() on SHMark Brown
Include asm/io.h directly so we've got a definition of pci_iomap(), the current set of includes do this implicitly on most architectures but not on SH. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-11ALSA: hda: fix unused variable warningAnders Roxell
When CONFIG_X86=n function azx_snoop doesn't use the variable chip it only returns true. sound/pci/hda/hda_intel.c: In function ‘dma_alloc_pages’: sound/pci/hda/hda_intel.c:2002:14: warning: unused variable ‘chip’ [-Wunused-variable] struct azx *chip = bus_to_azx(bus); ^~~~ Create a inline function of azx_snoop. Fixes: a41d122449be ("ALSA: hda - Embed bus into controller object") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-10ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFOWilly Tarreau
snd_emu10k1_fx8010_ioctl(SNDRV_EMU10K1_IOCTL_INFO) allocates memory using kmalloc() and partially fills it by calling snd_emu10k1_fx8010_info() before returning the resulting structure to userspace, leaving uninitialized holes. Let's just use kzalloc() here. BugLink: http://blog.infosectcbr.com.au/2018/09/linux-kernel-infoleaks.html Signed-off-by: Willy Tarreau <w@1wt.eu> Cc: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-04Merge branch 'topic/pcm-indirect-fixes' into for-nextTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-04ALSA: cs46xx: Use SNDRV_PCM_INFO_SYNC_APPLPTR info flagTakashi Iwai
The recently introduced PCM info flag assures the call of ack ops at each applptr change, and this is mandatory for the indirect PCM helpers. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-04ALSA: emu10k1: Use SNDRV_PCM_INFO_SYNC_APPLPTR info flagTakashi Iwai
The recently introduced PCM info flag assures the call of ack ops at each applptr change, and this is mandatory for the indirect PCM helpers. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-04ALSA: rme32: Use SNDRV_PCM_INFO_SYNC_APPLPTR info flagTakashi Iwai
The recently introduced PCM info flag assures the call of ack ops at each applptr change, and this is mandatory for the indirect PCM helpers. Also, with the proper ack callback, we need no longer prefill at trigger start. The relevant code can be killed. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-30Merge tag 'hda-codec-h-move' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ALSA: Move hda_codec.h to include/sound For easier sharing with ASoC.
2018-08-30ALSA: hda: move hda_codec.h to include/soundPierre-Louis Bossart
As suggested by Takashi, move this header file to make it easier to include from e.g. the Intel Skylake driver in follow-up patches Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-30ALSA: hda - Fix cancel_work_sync() stall from jackpoll workTakashi Iwai
On AMD/ATI controllers, the HD-audio controller driver allows a bus reset upon the error recovery, and its procedure includes the cancellation of pending jack polling work as found in snd_hda_bus_codec_reset(). This works usually fine, but it becomes a problem when the reset happens from the jack poll work itself; then calling cancel_work_sync() from the work being processed tries to wait the finish endlessly. As a workaround, this patch adds the check of current_work() and applies the cancel_work_sync() only when it's not from the jackpoll_work. This doesn't fix the root cause of the reported error below, but at least, it eases the unexpected stall of the whole system. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200937 Cc: <stable@vger.kernel.org> Cc: Lukas Wunner <lukas@wunner.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-30ALSA: hda - Clean up jackpoll_ms option handlingTakashi Iwai
Currently the jackpoll_ms option value is passed indirectly by referring to an array in chip->jackpoll_ms although each card needs to see only the assigned value. Also, the sanity check is done at each time in get_jackpoll_interval() although basically jackpoll_ms option is a read-only, hence we need to evaluate only once at probe time. This patch is the code simplification about the above points: the jack polling interval is directly set to chip->jackpoll_interval so that it can be simply copied to each codec. No functional change but only code reduction. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-28ASoC: hdac_hda: add asoc extension for legacy HDA codec driversRakesh Ughreja
This patch adds a kernel module which is used by the legacy HDA codec drivers as library. This implements hdac_ext_bus_ops to enable the reuse of legacy HDA codec drivers with ASoC platform drivers. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-28ALSA: hda: move hda_codec.h to include/soundPierre-Louis Bossart
As suggested by Takashi, move this header file to make it easier to include from e.g. the Intel Skylake driver in follow-up patches Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-28ALSA: intel8x0: Use the new non-cached allocation for 440MX workaroundTakashi Iwai
intel8x0 driver requires the non-cached pages for 440MX workaround, and this can be implemented more easily with the new memalloc type, SNDRV_DMA_TYPE_DEV_UC. This allows us to reduce lots of code. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-28ALSA: hda: Remove substream allocation/free opsTakashi Iwai
Since we dropped the memory page fiddling in the own allocators in hda_intel.c, the substream allocation and free ops in both hda_intel.c and hda_tegra.c became nothing but the simple calls of the standard snd_pcm_lib helpers. As both are identical, there is no longer need for indirect calls via ops; it's a good opportunity for removing ops and simplifying the codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-28ALSA: hda: Use new non-cached allocation for non-snoop modeTakashi Iwai
Now the ALSA memory allocator helper supports the new non-cached pages, let's use the new type, SNDRV_DMA_TYPE_DEV_UC_SG, for HD-audio driver. This allows us to reduce lots of codes. As another positive side-effect by this patch, the long-standing issue with non-snoop mode playing in the non-mmap mode is fixed. The core memalloc helper does the proper pgprot setup for non-cached pages for vmap(), which was missing in the past. Reported-and-tested-by: Hans Hu <HansHu@zhaoxin.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-28ALSA: hda: Check the non-cached stream buffers more explicitlyTakashi Iwai
Introduce a new flag, uc_buffer, to indicate that the controller requires the non-cached pages for stream buffers, either as a chip-specific requirement or specified via snoop=0 option. This improves the code-readability. Also, this patch fixes the incorrect behavior for C-Media chip where the stream buffers were never handled as non-cached due to the check of driver_type even if you pass snoop=0 option. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2025-09-21 17:36:01 +0000