summaryrefslogtreecommitdiff
path: root/sound/soc/intel/skylake/skl-topology.c
AgeCommit message (Collapse)Author
2016-11-03ASoC: Intel: Skylake: Add D0i3 mode ref countingVinod Koul
For device opened/closed, we check the D0i3 capability for the device and invoke skl_tplg_d0i3_get/put, which counts the use case based on the mode supported. These counters are then used to decide if the device can enter D0i3 mode of streaming or non-streaming or no D0i3. Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-03ASoC: Intel: Skylake: Add support for specifying D0i3 configurationVinod Koul
Not all use cases can support Doi3. Only certain use cases like hot word detection, deep buffering can support D0i3 based on resource requirement. So, pass the D0i3 capability for the FE/BE copier using topology. This will be used to take a decision for D0i3 mode entry/exit. Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-03ASoC: Intel: Skylake: Add support for LPModeVinod Koul
For D0i3, we need to tell DSP to run the pipelines in LP mode. This information is kept in topology and passed to driver as an attribute for pipe. So add a new tuple for lpmode and program the pipe based on value set. Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24ASoC: Intel: Skylake: add missing \n to end of dev_* messagesColin Ian King
Trival fix, some dev_* messages are missing a \n, so add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24ASoC: Intel: Skylake: Update to use instance ids generatedDharageswari R
Post bind parameters of KPB module contains the instance id's of neighbouring modules in the sink path Now that module instance ids are generated dynamically we need to update these parameters as well, so use the table created and update the ids Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24ASoC: Intel: Skylake: Use private instance id of modules in IPCDharageswari R
Use private id's of module instances that are generated during init_module for the IPC messages to DSP. These id's are freed up during delete pipeline. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01ASoC: Intel: Skylake: Unload all the loadable modulesDharageswari R
There could be more than one loadable module in a pipeline. So unload all modules whilst parsing the list. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01ASoC: Intel: Skylake: check manifest sizeVinod Koul
For some platforms manifest data may not be defined, thus the private data would not be defined as well. So check the size of private data and proceed only if it is valid. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-23ASoC: Intel: Skylake: Parse manifest dataShreyas NC
Topology manifest has lib names and lib count info. So, define tokens to represent module private data and parse these tokens to fill up the manifest structure in the driver accordingly. Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-22ASoC: Intel: Skylake: Parse vendor tokens to build module dataShreyas NC
Skl topology data is preceded by a descriptor for number of data blocks, the size of the data block and type of data block. The type of the data block can be either a tuple or a binary blob. Private data is parsed based on data block type and module data is filled accordingly. Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-10ASoC: Intel: Skylake: remove module id query at runtimeVinod Koul
Now that we have balanced loading of the topology file and split of init and fw_init and fill module data during asoc probe. So remove it from runtime, but keep error check in case things fall apart. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-10ASoC: Intel: Skylake: modify snd_skl_get_module_info argsDharageswari R
snd_skl_get_module_info() takes skl_dfw_module as an argument. The users then updates the topology data, so instead pass skl_module_cfg and let snd_skl_get_module_info() fill that up. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: Add module processing domain supportSenthilnathan Veppur
A module can be scheduled in deferent processing domains in DSP. Topology specifies the module domain. Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: fix noderef.cocci warningskbuild test robot
sound/soc/intel/skylake/skl-topology.c:480:24-30: ERROR: application of sizeof to pointer sizeof when applied to a pointer typed expression gives the size of the pointer Generated by: scripts/coccinelle/misc/noderef.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: add support for tplg manifest loadKranthi G
Topology manifest gives information about the libraries to be loaded. Implement the topology manifest load callback to get this. Signed-off-by: Kranthi G <gudishax.kranthikumar@intel.com> Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Ramesh Babu <ramesh.babu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08ASoC: Intel: Skylake: Move modules query to runtimeVinod Koul
Since we are moving DSP init to later, at the topology load the module info is not available. So set the module id to -1 at init and query at first module initialization. Signed-off-by: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-24Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown
2016-07-08ASoC: Intel: Skylake: Fix to use the actual size for TLV controlDharageswari R
DSP expects the actual length of parameters that is set through TLV to be passed in large config set, so pass the actual size received in tlv_control_set() instead of max size. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07ASoC: Intel: Skylake: Copy the pipe parameter by pipe typeJeeja KP
For pass through pipe, Host and Link DMA id's are valid, instead of overwriting the params set the host and link based on pipe type. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07ASoC: Intel: Skylake: Set the DSP pipe typeJeeja KP
DSP pipe type can be a pass through or it can be processing pipe. In case of pass through pipe, it is a single pipeline with both host and link copier in the same pipeline. Identify the DSP pipe type if it pass through or not. Pass through pipe is identified by checking if it has both host and link copier in the same pipeline. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07ASoC: Intel: Skylake: Create Pipe to widget list in soc probeJeeja KP
We need to Identify the DSP pipe type and based on it being a pass thru pipeline or not, we need to copy the pipeline params. Pipe to widget mapping was earlier done in pre PMD widget handler, but since the pipe type would now be required in hw_params for bypass pipelines we need to move this to be done during the ASoC probe of the platform component. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07ASoC: Intel: Skylake: Clean up of driver resources in suspendDharageswari R
On suspend firmware is re-initialized so resources are reset inside firmware. Driver should also clear the firmware counters at this time. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-07ASoC: Intel: Skylake: Avoid freeing up of unallocated memory/mcpsDharageswari R
When DSP pipe/module is not initialized successfully, memory/mcps is not allocated. So check the pipe/module state to avoid freeing up of unallocated memory/mcps. And allocate resources when pipe/ module is initialized successfully. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-30ASoC: Intel: Skylake: Add DSP firmware manifest parsingShreyas NC
Module params like module_id and loadable flag can be changed in the DSP Firmware. These are kept in the firmware manifest and driver should read these values from this manifest. So, add support to parse the DSP firmware manifest and read these module params. Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-13Merge remote-tracking branch 'asoc/topic/hdmi' into asoc-nextMark Brown
2016-05-02Merge tag 'asoc-fix-v4.6-rc5' into asoc-intelMark Brown
ASoC: Fixes for v4.6 This is a fairly large collection of fixes but almost all driver specific ones, especially to the new Intel drivers which have had a lot of recent development. The one core fix is a change to the debugfs code to avoid crashes in some relatively unusual configurations.
2016-04-28ASoC: Intel: Skylake: Update channel map based on runtime paramsSubhransu S. Prusty
Default channel map is set for 2 channels. Fix the channel map based on runtime params to support multichannel. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-21ASoC: Intel: Skylake: Use UUID in binary formatShreyas NC
To avoid complex string manipulations with UUID in canonical form, use UUID in binary format. Signed-off-by: Shreyas NC <shreyas.nc@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-12ASoC: Intel: Skylake: Fix ibs/obs calc for non-integral sampling ratesSubhransu S. Prusty
FW expects sampling rate rounded up to next higher integer value when calculating ibs/obs. For example for 44.1k, it should be rounded up to 45 to calculate ibs/obs. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-28ASoC: Intel: Skylake: Fix DSP resource de-allocationJeeja KP
In PRE PMD of widget handler DSP resources are allocated after the creation of DSP pipe and modules and in POST PMD DSP resources are destroyed. If there is any failure in pipe or module creation in PRE PMD, pcm trigger fails and finally POST PMD gets called and DSP resources are freed, without getting allocated. Fixes the DSP resource de-allocation by allocating the resource before creation of pipe and module in PRE PMD and in POST PMD, free the resources. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-28ASoC: Intel: Skylake: Fix for unloading module only when it is loadedJeeja KP
Module needs to be unloaded only when it is loaded successfully. To fix this, first correct the module state sequence and set module state to LOADED if module is loaded successfully. When unloading the module check if module state is not in UNINIT, then unload it. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-13Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown
2016-03-05Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown
2016-03-02ASoC: Intel: Skylake: correct direction in blob queryJeeja KP
The blob query for BE skl_tplg_update_be_blob() was not using right values for direction for blob query, so fix that. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-22ASoC: Intel: Skylake: remove bogus comparison of an array with NULLAlan Cox
dfw_ac->params is an array not a pointer. It will never be NULL. The check on ac->max appears sufficient. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-20ASoC: Intel: Skylake: Generate topology name for NHLT table headerVinod Koul
NHLT table [1] header has fields like oem_id, oem_table_id and oem_revision. Use that to load a unique topology binary specific to that platform NHLT Table is documented at: [1]: https://01.org/blogs/2016/intel-smart-sound-technology-audio-dsp Signed-off-by: Yang A Fang <yang.a.fang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-20ASoC: Intel: Skylake: fix pointer scalingAlan
skl_tplg_tlv_control_set does pointer maths on data but forgets that data is not uint8_t so the maths is already scaled in the pointer type. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-10Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown
2016-02-08ASoC: Intel: Skylake: Fill BE blob with default paramsJeeja KP
When we have a path that connects to DSP sink and source, we need to query the blob using the default params. So add a function to query the params for such path Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-08ASoC: Intel: Skylake: Allow module parameter set after bindJeeja KP
Some modules require params to be set after the module is bound to all the pins connected. The module provider initializes set_param flag for such modules and we send params after binding. This is done by the function skl_tplg_set_module_bind_params() Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-08ASoC: Intel: Skylake: Add skl_tplg_be_get_cpr_module() helperDharageswari.R
An I2S port can be connected to multiple BE pipes, get module config only for the active BE pipe. This helpers helps to do that and is used in subsequent patches Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-08Merge branch 'fix/intel' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2016-02-04ASoC: Intel: Skylake: Add missing PRE/POST_PMU handlers for vmixerJeeja KP
Some modules may be directly connected to a pipeline without a mixer module. For these modules, we require PRE_PMU and POST_PMU handler which will do bind between the pipelines, so add these missing handlers. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix bind of source with multiple sinksJeeja KP
skl_tplg_bind_sinks() takes only the first sink widget. This breaks in case we have multiple sinks for a module. So pass source widget to skl_tplg_bind_sinks() and bind for all sinks by calling this recursively Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix not to stop sink pipe in pga pmd eventJeeja KP
We should not stop the sink pipe in it's pmd handler for a mixin module as this module may still be connected to other pipes. This will be stopped and freed by current implementation on last connected pipe unbind. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix pipe memory allocation leakDharageswari.R
We check and allocate pipeline resources in one shot. That causes leaks if module creation fails later as that is not freed. So split the resource allocation into two, first check if resources are available and then add the resources upon successful creation. So two new functions are added for checking and current functions are re-purposed to only add the resources for memory and MCPS. Signed-off-by: Dharageswari.R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix mcps freeup after module unbind failureGuneshwor Singh
While cleaning resources on module pmd event, we check for return of skl_unbind_modules(). On failure this causes leak as all modules attached do not have resources freed. So ignore return value of module unbind and continue freeing resources. This makes dapm state and resources correct. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-04ASoC: Intel: Skylake: Fix the memory overwrite of tlv bufferVinod Koul
TLV buffer can be smaller than the module data, so update the size of data to be copied before doing the copy. Also TLV header consists of two unsigned ints, this is also taken into account here and size modified to reflect this Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-22ASoC: Intel: Skylake: Fix memory leakSudip Mukherjee
If snd_soc_tplg_component_load() fails we just printed an error message and returned the error code but we missed releasing the firmware. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-06Merge branch 'for-linus' into for-nextTakashi Iwai
Conflicts: drivers/gpu/drm/i915/intel_display.c sound/soc/intel/skylake/skl.h
generated by cgit (git 2.34.1) at 2025-07-31 08:16:09 +0000