summaryrefslogtreecommitdiff
path: root/sound/soc/sh
AgeCommit message (Collapse)Author
2014-02-03ASoC: rsnd: remove duplicate *priv from rsnd_dmaKuninori Morimoto
*priv pointer exists under rsnd_mod, and, it can get rsnd_mod pointer from rsnd_dma. remove duplicate rsnd_dma :: priv Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: explain SRC bypass mode settings in commentKuninori Morimoto
SRC bypass mode is useful for debugging. This patch explains SRC bypass mode settings in comment Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: rename rsnd_scu_convert_rate_ctrl()Kuninori Morimoto
rsnd_scu_convert_rate_ctrl() is unclear naming, and there is "rsnd_scu_convert_rate" variable. These are confusable. it renamed to rsnd_scu_set_convert_rate() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: remove ssiu from ssi.cKuninori Morimoto
Now, SSI_MODE0/1 are controlled under scu.c ssiu is no longer needed on ssi.c Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: SSI_MODE0/1 settings goes to scu.cKuninori Morimoto
SRU (Gen1) / SCU (Gen2) / SSIU (Gen2) are controlled under scu.c. (SCU + SSIU (Gen2) was SRU (Gen1)) And register of SSI_MODE0/1 are mapped on these IP. But these have been implemented under ssi.c on this driver. The naming is very confusable, but it should be implemented under scu.c Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: remove pin sync optionKuninori Morimoto
Renesas Chip is supporting multi pin sound, but the HW setting is very difficult and confusable. But driver is supporting it halfway. Remove SYNC option at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: rsnd_dai_is_clk_master() can be sharedKuninori Morimoto
Current rsnd driver is using ssi local rsnd_rdai_is_clk_master() for checking clock master. But it can be rsnd_dai_is_clk_master(), and share in each file Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: merge rsnd_scu_start/stop() and rsnd_scu_transfer_start/stop()Kuninori Morimoto
rsnd_scu_transfer_start/stop() are no longer needed. merge into rsnd_scu_start/stop() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: remove meaningless function parameterKuninori Morimoto
struct rsnd_priv *priv on rsnd_scu_init/start/stop() are no longer needed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: add rsnd_scu_init(), and separate init/startKuninori Morimoto
Current scu.c has rsnd_scu_start(), and, operation of initialization/start are implemented in this function. This patch adds new rsnd_scu_init() and separates rsnd_scu_start(), since rsnd_mod_ops has .init/.start callbacks. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: control SCU ops in probe timingKuninori Morimoto
SCU will be used if platform requested to use. Current driver is checking it in runtime, but, it can be decided in probe timing. This patch do it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: remove meaningless rsnd_ssi_non()Kuninori Morimoto
rsnd_ssi_non_ops callback functions are never called. remove these meaningless callback Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: cleanup debug information methodKuninori Morimoto
rsnd_mod debug information is implemented in each callback functions now. But, it can be implemented in rsnd_mod_call(), and share this code. This patch adds it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: tidyup register naming of BUSIF_MODEKuninori Morimoto
Gen1:SRU has only 1 BUSIF_MODE, but Gen2:SSIU/SCU has SRCm_BUSIF_MODE, and SSIn_BUSIF_MODE. This patch rename current BUSIF_MODE to SRC_BUSIF_MODE. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-16Merge remote-tracking branches 'asoc/topic/adsp', 'asoc/topic/atmel', ↵Mark Brown
'asoc/topic/bcm2835', 'asoc/topic/docs', 'asoc/topic/fsl', 'asoc/topic/generic', 'asoc/topic/kirkwood', 'asoc/topic/mc13783', 'asoc/topic/mxs', 'asoc/topic/nuc900', 'asoc/topic/sai', 'asoc/topic/sh', 'asoc/topic/ssm2602', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl4030', 'asoc/topic/ux500', 'asoc/topic/width' and 'asoc/topic/x86' into for-tiwai
2014-01-09ASoC: sh: Don't set unused struct snd_pcm_hardware fieldsLars-Peter Clausen
The ASoC core assumes that the PCM component of the ASoC card transparently moves data around and does not impose any restrictions on the memory layout or the transfer speed. It ignores all fields from the snd_pcm_hardware struct for the PCM driver that are related to this. Setting these fields in the PCM driver might suggest otherwise though, so rather not set them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-02Merge remote-tracking branches 'asoc/topic/ad1836', 'asoc/topic/ad193x', ↵Mark Brown
'asoc/topic/adav80x', 'asoc/topic/adsp', 'asoc/topic/ak4641', 'asoc/topic/ak4642', 'asoc/topic/arizona', 'asoc/topic/atmel', 'asoc/topic/au1x', 'asoc/topic/axi', 'asoc/topic/bcm2835', 'asoc/topic/blackfin', 'asoc/topic/cs4271', 'asoc/topic/cs42l52', 'asoc/topic/da7210', 'asoc/topic/davinci', 'asoc/topic/ep93xx', 'asoc/topic/fsl', 'asoc/topic/fsl-mxs', 'asoc/topic/generic', 'asoc/topic/hdmi', 'asoc/topic/jack', 'asoc/topic/jz4740', 'asoc/topic/max98090', 'asoc/topic/mxs', 'asoc/topic/omap', 'asoc/topic/pxa', 'asoc/topic/rcar', 'asoc/topic/s6000', 'asoc/topic/sai', 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/spear', 'asoc/topic/ssm2518', 'asoc/topic/ssm2602', 'asoc/topic/tegra', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl6040', 'asoc/topic/txx9', 'asoc/topic/uda1380', 'asoc/topic/width', 'asoc/topic/wm8510', 'asoc/topic/wm8523', 'asoc/topic/wm8580', 'asoc/topic/wm8711', 'asoc/topic/wm8728', 'asoc/topic/wm8731', 'asoc/topic/wm8741', 'asoc/topic/wm8750', 'asoc/topic/wm8753', 'asoc/topic/wm8776', 'asoc/topic/wm8804', 'asoc/topic/wm8900', 'asoc/topic/wm8901', 'asoc/topic/wm8940', 'asoc/topic/wm8962', 'asoc/topic/wm8974', 'asoc/topic/wm8985', 'asoc/topic/wm8988', 'asoc/topic/wm8990', 'asoc/topic/wm8991', 'asoc/topic/wm8994', 'asoc/topic/wm8995', 'asoc/topic/wm9081' and 'asoc/topic/x86' into asoc-next
2013-12-31ASoC: rsnd: add SRC (Sampling Rate Converter) supportKuninori Morimoto
This patch adds SRC support to Renesas sound driver. SRC converts sampling rate between codec <-> cpu. It needs special codec chip, or very simple DA/AD converter to use it. This patch was tested via ak4554 codec, and supports Gen1 only at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: rsnd: tidyup rsnd_ssi_master_clk_start() parameterKuninori Morimoto
Renesas sound has SRC (= Sampling Rate Converter), but, the HW implementation depends on its generation. It was part of SRU on Gen1, and SCU on Gen2. This SCU needs DMA transfer to use it. Current rsnd driver is using it as DMA transfer buffer (= no rate convert), and Gen1 is only supported at this point. This patch cleanup it with focusing about SRC and Gen2 part. ssi clock which is calculated from rsnd_ssi_master_clk_start() should have flexibility since Renesas sound has SRC (= Sampling Rate Converter). But current implementation is using runtime->rate directly. This patch tidyup rsnd_ssi_master_clk_start() parameter as preparation of future SRC support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: rsnd: scu cleanup: add rsnd_scu_rate_ctrl()Kuninori Morimoto
Renesas sound has SRC (= Sampling Rate Converter), but, the HW implementation depends on its generation. It was part of SRU on Gen1, and SCU on Gen2. This SCU needs DMA transfer to use it. Current rsnd driver is using it as DMA transfer buffer (= no rate convert), and Gen1 is only supported at this point. This patch cleanup it with focusing about SRC and Gen2 part. rsnd_scu_set_hpbif() is renamed to rsnd_scu_rate_ctrl(), since its naming doesn't indicate the function meaning. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: rsnd: INT_ENABLE is needed only Gen2Kuninori Morimoto
INT_ENABLE is needed only Gen2. rsnd_mod_write() do nothing on Gen1, but it is confusable. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: rsnd: add rsnd_scu_transfer_start()Kuninori Morimoto
Renesas sound has SRC (= Sampling Rate Converter), but, the HW implementation depends on its generation. It was part of SRU on Gen1, and SCU on Gen2. This SCU needs DMA transfer to use it. Current rsnd driver is using it as DMA transfer buffer (= no rate convert), and Gen1 is only supported at this point. This patch cleanup it with focusing about SRC and Gen2 part. SRC_CTRL/BUSIF_MODE are used for transfer start. This patch adds rsnd_scu_transfer_start() and merge these Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: rsnd: route setting is needed only Gen1Kuninori Morimoto
Renesas sound has SRC (= Sampling Rate Converter), but, the HW implementation depends on its generation. It was part of SRU on Gen1, and SCU on Gen2. This SCU needs DMA transfer to use it. Current rsnd driver is using it as DMA transfer buffer (= no rate convert), and Gen1 is only supported at this point. This patch cleanup it with focusing about SRC and Gen2 part. rsnd_scu_set_route() is needed only Gen1. This patch renames it to rsnd_scu_set_route_if_gen1() and it adds comment to rsnd_reg member in order to clarify it is used for Gen1. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: rsnd: make sure variable name for 44.1kHz/48kHzKuninori Morimoto
This driver is assuming that RBGA is used as source clock of 44.1kHz category, and RBGB is used as source clock of 48kHz category. This patch clarifies the variable name. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: rsnd: tidyup register namingKuninori Morimoto
Use correct register name which appears in the datasheet Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: rsnd: tidyup ssi commentKuninori Morimoto
we can check rsnd_ssi_init(), not, rsnd_ssi_start() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: rsnd: add rsnd_adg_set_ssi_clk() and cleanup adgKuninori Morimoto
This patch adds rsnd_adg_set_ssi_clk() to access to AUDIO_CLK_SEL0/1/2, and removes last user of rsnd_write/read/bset which is very low level function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-11ASoC: fsi: remove original filter from fsi_dma_probe()Kuninori Morimoto
Remove original filter from fsi_dma_probe(), and use SH-DMA suitable filter. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-10ASoC: rsnd: gen: fixup Gen2 channel sizeKuninori Morimoto
Gen2 has 0 - 9, total 10 channels, not 9 channels. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-04ASoC: rcar: use devm_clk_get() instead of clk_get()Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-29ASoC: rcar: add Gen2 sound supportKuninori Morimoto
This patch adds Gen2 sound support for Renesas R-Car. But, it is supporting PIO transfer only at this point Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-29ASoC: rcar: remove rcar_gen_opsKuninori Morimoto
Current rcar driver gen.c is using rcar_gen_ops which was made with the assumption that Gen1 and Gen2 need different behavior. but it was not needed. This patch removes unnecessary complex method. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-29ASoC: rcar: remove .path_init/exit from rsnd_gen_opsKuninori Morimoto
rsnd_gen_ops has .path_init/exit callback function which cares SRU/SSI (if Gen1) SCU/SSIU/SSI (if Gen2) path settings. But, the differences between Gen1/Gen2 are cared in ssi.c/scu.c, and the path itself is same in Gen1/Gen2. This patch removes .path_init/exit callback. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-29ASoC: rcar: add rsnd_is_accessible_reg()Kuninori Morimoto
Current rcar driver is supporting Gen1, and Gen2 will be supported soon. Then, some registers are used from Gen1 only, or from Gen2 only. To avoid NULL pointer access, this patch adds register accessible check function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-29ASoC: rcar: separate regmap init common fieldKuninori Morimoto
The repmap initialization difference between Gen1/Gen2 is only register offset. This patch separates rsnd_gen1_regmap_init() into common part and Gen1 specific part. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-29ASoC: rcar: remove unused register settingsKuninori Morimoto
AUDIO_CLK_SEL4/5 are not used Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-24ASoC: rcar: some dubious one-bit signed bitfieldsDan Carpenter
Because these are signed they can either be 0 or -1 instead of 0 and 1 as intended. It doesn't cause a problem from what I can see, but it's dangerous and Sparse complains: sound/soc/sh/rcar/rsnd.h:177:25: error: dubious one-bit signed bitfield Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-24ASoC: rcar: select REGMAPKuninori Morimoto
55e5b6fd5af04b6d8b0ac6635edf49476ff298ba (ASoC: rsnd: use regmap instead of original register mapping method) support regmap/regmap_field on Renesas sound driver. It needs CONFIG_REGMAP now. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-21Merge tag 'asoc-v3.13-5' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.13 A bunch of device specific fixes, nothing with a general impact here.
2013-11-20Merge remote-tracking branch 'asoc/fix/rcar' into asoc-linusMark Brown
2013-11-19ASoC: rcar: fixup dma_async_issue_pending() timingKuninori Morimoto
DMAEngine will stall without this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-19ASoC: rcar: off by one in rsnd_scu_set_route()Dan Carpenter
If "id == ARRAY_SIZE(routes)" then we read one space beyond the end of the routes[] array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-18ASoC: rcar: fixup mod access before checkingKuninori Morimoto
rsnd_dai_connect() is using mod before NULL checking. This patch fixes it up Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-08Merge remote-tracking branch 'asoc/topic/warn' into asoc-nextMark Brown
2013-11-08Merge remote-tracking branch 'asoc/topic/rcar' into asoc-nextMark Brown
2013-11-07ASoC: sh: Use WARN_ON() instead of BUG_ON()Takashi Iwai
Use WARN_ON() and handle the error cases accordingly. Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-07ASoC: rcar: Use WARN_ON() instead of BUG_ON()Takashi Iwai
Use WARN_ON() and handle the error cases accordingly. Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-06ASoC: rcar: remove un-needed select from KconfigKuninori Morimoto
config RCAR_CLK_ADG is not exist Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-03Merge remote-tracking branch 'asoc/topic/rcar' into asoc-nextMark Brown
2013-10-31ASoC: rcar: remove original filter from rsnd_dma_init()Kuninori Morimoto
Remove original filter from rsnd_dma_init(), and use SH-DMA suitable filter. This new style can be used from Device Tree. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit (git 2.34.1) at 2025-09-15 07:21:19 +0000