summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2019-11-12ASoC: soc-core: merge snd_soc_add_dai_link() and soc_bind_dai_link()Kuninori Morimoto
We don't need to separete snd_soc_add_dai_link() and soc_bind_dai_link() anymore. Let's merge these. One note is that before this patch, it adds list (A) eventhough if it had dai_link->ignore (1), or already bounded dai_link (2). But I guess it is wrong. This patch also solve this issue. /* BEFORE */ int soc_bind_dai_link(...) { ... (1) if (dai_link->ignore) return 0; (2) if (soc_is_dai_link_bound(...)) return 0; ... } int snd_soc_add_dai_link(...) { ... => ret = soc_bind_dai_link(...); => if (ret < 0) => return ret; (A) list_add_tail(&dai_link->list, &card->dai_link_list); ... } /* AFTER */ int snd_soc_add_dai_link(...) { ... (1) if (dai_link->ignore) return 0; (2) if (soc_is_dai_link_bound(...)) return 0; ... (A) list_add_tail(&dai_link->list, &card->dai_link_list); return 0; } Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87r22lhkx8.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: merge snd_soc_unregister_dai() and soc_del_dai()Kuninori Morimoto
We don't need to separete snd_soc_unregister_dai() and soc_del_dai() anymore. Let's merge these Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87sgn1hkxg.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: merge snd_soc_register_dai() and soc_add_dai()Kuninori Morimoto
We don't need to separete snd_soc_register_dai() and soc_add_dai() anymore. Let's merge these Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87tv7hhkxm.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: remove soc_is_dai_link_bound()Kuninori Morimoto
Because complex separeted "card pre-listed component" and "topology added component" duplicated operation is now becoming simple, we don't need to check already bound dai_link which is not exist anymore. This patch removes soc_is_dai_link_bound(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87v9rxhkxw.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: Jack: Fix NULL pointer dereference in snd_soc_jack_reportPawel Harlozinski
Check for existance of jack before tracing. NULL pointer dereference has been reported by KASAN while unloading machine driver (snd_soc_cnl_rt274). Signed-off-by: Pawel Harlozinski <pawel.harlozinski@linux.intel.com> Link: https://lore.kernel.org/r/20191112130237.10141-1-pawel.harlozinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-11-12ASoC: SOF: topology: free kcontrol memory on errorDragos Tarcatu
The volume and bytes kcontrols are currently not freeing their memory on initialization failures. When an error occurs, all the widgets loaded so far are unloaded via sof_widget_unload(). But this only happens for the widgets that got successfully loaded. Fix that by kfree()-ing the allocated memory on load error. Fixes: 311ce4fe7637d ("ASoC: SOF: Add support for loading topologies") Reviewed-by: Paul Olaru <paul.olaru@nxp.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222039.19651-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ALSA: au88x0: Fix incorrect device pointer for preallocationTakashi Iwai
The code change in commit 6974f8ad4494 ("ALSA: pci: Avoid non-standard macro usage") contained an incorrect conversion, which left the invalid pointer passed to the allocator for au88x0 driver. Fix it. Fixes: 6974f8ad4494 ("ALSA: pci: Avoid non-standard macro usage") Link: https://lore.kernel.org/r/20191112143243.22216-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-12ASoC: SOF: PM: only suspend to D0I3 when neededKeyon Jie
We should suspend audio to D3 by default, for the sake of power saving, change the condition of D0I3 suspending here to that when there is stream with suspend_ignored specified. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: add helper to check if we should enter d0i3 suspendKeyon Jie
Add helper to check if the DSP should be put in D0i3. This function returns true if a stream has ignored the SUSPEND trigger to keep the pipelines running in the DSP. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: PM: add check before setting d0_substateKeyon Jie
Add check before seeting d0_substate and return success if Audio DSP is already in the target substate. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: PM: add state machine to commentsKeyon Jie
Add Audio DSP state machine with comments. Note that the 'D0<-->runtime D0I3' part is not implemented yet. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: Intel: hda: use fallback for firmware namePierre-Louis Bossart
We have platforms such as CFL with no known I2S codec being used, and the ACPI tables are currently empty, so fall-back to using the firmware filename used in nocodec mode Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222901.19892-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: Intel: acpi-match: split CNL tables in threePierre-Louis Bossart
Due to firmware manifest/signature differences, we have to use different firmware names, so split CNL machine table in three (CNL, CFL, CML). The CFL table is currently empty since all known platforms use HDaudio, but let's plan ahead. Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222901.19892-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: Intel: Fix CFL and CML FW nocodec binary names.Liam Girdwood
The manifest information is different between CNL, CML and CFL platforms hence we need to load different files. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222901.19892-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: rt5682: cancel jack_detect_work if hs_jack is set to nullBard liao
jack_detect_work will be triggered by rt5682_irq. We should cancel it if hs_jack is set to null. Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222152.19723-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5645: Fixed buddy jack support.Jacob Rasmussen
The headphone jack on buddy was broken with the following commit: commit 6b5da66322c5 ("ASoC: rt5645: read jd1_1 status for jd detection"). This changes the jd_mode for buddy to 4 so buddy can read from the same register that was used in the working version of this driver without affecting any other devices that might use this, since no other device uses jd_mode = 4. To test this I plugged and uplugged the headphone jack, verifying audio works. Signed-off-by: Jacob Rasmussen <jacobraz@google.com> Reviewed-by: Ross Zwisler <zwisler@google.com> Link: https://lore.kernel.org/r/20191111185957.217244-1-jacobraz@google.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-11-11ASoC: wm8904: configure sysclk/FLL automaticallyMichael Walle
This adds a new mode WM8904_CLK_AUTO which automatically enables the FLL if a frequency different than the MCLK is set. These additions make the codec work with the simple-card driver in general and especially in systems where the MCLK doesn't match the required clock. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20191108203152.19098-1-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: Intel: kbl_rt5663_rt5514_max98927: Add dmic format constraintYu-Hsuan Hsu
On KBL platform, the microphone is attached to external codec(rt5514) instead of PCH. However, TDM slot between PCH and codec is 16 bits only. In order to avoid setting wrong format, we should add a constraint to force to use 16 bits format forever. Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190923162940.199580-1-yuhsuan@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: Add DA7213 audio codec as selectable optionSebastian Reichel
This commit adds the Dialog DA7213 audio codec as a selectable option in the kernel config. Currently the driver can only be selected for Intel Baytrail/Cherrytrail devices or if SND_SOC_ALL_CODECS is enabled. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20191108174843.11227-3-sebastian.reichel@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ALSA: timer: Fix the breakage of slave link openTakashi Iwai
A silly mistake was made while applying the fix for potential races in commit 6a34367e52ca ("ALSA: timer: Fix possible race at assigning a timer instance"): when a slave PCM is opened and succeeds, it doesn't return but proceeds to the master timer open code instead. Plug the hole and beautify a bit. Fixes: 6a34367e52ca ("ALSA: timer: Fix possible race at assigning a timer instance") Reported-by: syzbot+4476917c053f60112c99@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20191111173642.6093-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-11ALSA: hda: hdmi - fix pin setup on TigerlakeKai Vehmanen
Apply same logic to pin setup as on previous platforms. Fixes errors in HDMI/DP playback. Tested with both snd-hda-intel and SOF drivers. Fixes: 9a11ba7388f1 ("ALSA: hda: hdmi - add Tigerlake support") Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191111133838.21213-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-11ASoC: rt5677: Wait for DSP to boot before loading firmwareCurtis Malainey
Wait for hardware to startup. If we load before hardware is ready we could end up corrupting the firmware. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-12-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Set ADC clock to use PLL and enable ASRCCurtis Malainey
Use the PLL to kept the correct 24M clock rate so frequency shift does not occur when using the DSP VAD. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-11-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: bdw-rt5677: Turn on MCLK1 for DSP via DAPMCurtis Malainey
The RT5677 DSP needs the I2S MCLK1 to run its DSP. Add a dapm route to SSP0 CODEC IN so the clock is turned on automatically when the DSP is turned on. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-10-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Allow VAD to be shut on/off at all timesCurtis Malainey
Due to limitations of the clocking configuration, we have no way of scheduling our hibernation before the bdw dsp hibernates. This causes issues when the system suspends with an open stream. We need userspace to toggle the kcontrol before we are suspended so that any writes on suspend are not lost and we don't corrupt the regmap. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-9-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Disable irq at suspendBen Zhang
The irq is disabled at suspend to avoid running the threaded irq handler after the codec has been powered off. At resume, codec irq is re-enabled and the interrupt status register is checked to see if headphone has been pluggnd/unplugged while the device is suspended. There is still a chance that the headphone gets enabled or disabled after the codec is suspended. disable_irq syncs the threaded irq handler, but soc-jack's threaded irq handler schedules a delayed work to poll gpios (for debounce). This is still OK. The codec won't be powered back on again because all audio paths have been suspended, and there are no force enabled supply widgets (MICBIAS1 is disabled). The gpio status read after codec power off could be wrong, so the gpio values are checked again after resume. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-8-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Stop and restart DSP over suspend/resumeBen Zhang
MCLK1 gets disabled at suspend and re-enabled at resume. Before MCLK1 is re-enabled, if the DSP is already on (either the DSP was left on during suspend, or the DSP is turned on early at resume), i2c register read returns garbage and corrupts the regmap cache. This patch stops the DSP before suspend and restarts it after resume with a dalay to ensure MCLK is on while loading firmware. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-7-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatileBen Zhang
The codec dies when RT5677_PWR_ANLG2(MX-64h) is set to 0xACE1 while it's streaming audio over SPI. The DSP firmware turns on PLL2 (MX-64 bit 8) when SPI streaming starts. However regmap does not believe that register can change by itself. When BST1 (bit 15) is turned on with regmap_update_bits(), it doesn't read the register first before write, so PLL2 power bit is cleared by accident. Marking MX-64h as volatile in regmap solved the issue. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-6-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Add DAPM audio path for hotword streamBen Zhang
Add a DAPM audio path from "DMIC L1" to "DSP Buffer" so that when hotwording is enabled, DAPM does not power off the codec with SND_SOC_BIAS_OFF. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-5-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Enable jack detect while DSP is runningBen Zhang
Before a hotword is detected, GPIO1 pin is configured as IRQ output so that jack detect works. When a hotword is detected, the DSP firmware configures the GPIO1 pin as GPIO1 and drives a 1. rt5677_irq() is called after a rising edge on the GPIO1 pin, due to either jack detect event or hotword event, or both. All possible events are checked and handled in rt5677_irq() where GPIO1 pin is configured back to IRQ output if a hotword is detected. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-4-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: bdw-rt5677: Add a DAI link for rt5677 SPI PCM deviceBen Zhang
This link is needed for the RT5677 DSP to do hotwording Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-3-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5677: Load firmware via SPI using delayed workBen Zhang
The firmware rt5677_elf_vad is an ELF binary obtained from request_firmware(). Sections of the ELF are loaded to the DSP via SPI. A model (e.g. en_us.mmap) can optionally be loaded to the DSP at RT5677_MODEL_ADDR to overwrite the baked-in model in rt5677_elf_vad. Then we switch to DSP mode, load firmware, and let DSP run. When a hotword is detected, an interrupt is fired and rt5677_irq() is called. When 'DSP VAD Switch' is turned off, the codec is set back to normal mode. The kcontrol 'DSP VAD Switch' is automatically enabled/disabled when the hotwording PCM stream is opened/closed. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191106011335.223061-2-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: fsl_audmix: Add spin lock to protect tdmsShengjiu Wang
Audmix support two substream, When two substream start to run, the trigger function may be called by two substream in same time, that the priv->tdms may be updated wrongly. The expected priv->tdms is 0x3, but sometimes the result is 0x2, or 0x1. Fixes: be1df61cf06e ("ASoC: fsl: Add Audio Mixer CPU DAI driver") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Link: https://lore.kernel.org/r/1e706afe53fdd1fbbbc79277c48a98f8416ba873.1573458378.git.shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
2019-11-11ALSA: hda: Add Cometlake-S PCI IDChiou, Cooper
Add HD Audio Device PCI ID for the Intel Cometlake-S platform Signed-off-by: Chiou, Cooper <cooper.chiou@intel.com> Link: https://lore.kernel.org/r/20191108071349.12840-1-cooper.chiou@intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-09ALSA: usb-audio: Fix missing error check at mixer resolution testTakashi Iwai
A check of the return value from get_cur_mix_raw() is missing at the resolution test code in get_min_max_with_quirks(), which may leave the variable untouched, leading to a random uninitialized value, as detected by syzkaller fuzzer. Add the missing return error check for fixing that. Reported-and-tested-by: syzbot+abe1ab7afc62c6bb6377@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191109181658.30368-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-09ALSA: pcm: Unexport snd_pcm_sgbuf_ops_pageTakashi Iwai
The helper is no longer referred after the recent code refactoring. Drop the export for saving some bits and future misuse. Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20191108094641.20086-9-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-09ASoC: cros_ec_codec: Convert to the common vmalloc memallocTakashi Iwai
The recent change (*) in the ALSA memalloc core allows us to drop the special vmalloc-specific allocation and page handling. This patch coverts to the common code. (*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation support 7e8edae39fd1: ALSA: pcm: Handle special page mapping in the default mmap handler Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20191108094641.20086-8-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-09ASoC: rt5677-spi: Convert to the common vmalloc memallocTakashi Iwai
The recent change (*) in the ALSA memalloc core allows us to drop the special vmalloc-specific allocation and page handling. This patch coverts to the common code. (*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation support 7e8edae39fd1: ALSA: pcm: Handle special page mapping in the default mmap handler Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191108094641.20086-7-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-09ASoC: SOF: Drop superfluous snd_pcm_sgbuf_ops_pageTakashi Iwai
snd_pcm_sgbuf_ops_page is no longer needed to be set explicitly to PCM page ops since the recent change in the PCM core (*). Leaving it NULL should work as long as the preallocation has been done properly. This patch drops the redundant lines. (*) 7e8edae39fd1: ALSA: pcm: Handle special page mapping in the default mmap handler Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20191108094641.20086-6-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-09ASoC: intel: Avoid non-standard macro usageTakashi Iwai
Pass the device pointer from the PCI pointer directly, instead of a non-standard macro. The macro didn't give any better readability. Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20191108094641.20086-5-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-09ASoC: intel: Drop superfluous snd_pcm_sgbuf_ops_pageTakashi Iwai
snd_pcm_sgbuf_ops_page is no longer needed to be set explicitly to PCM page ops since the recent change in the PCM core (*). Leaving it NULL should work as long as the preallocation has been done properly. This patch drops the redundant lines. (*) 7e8edae39fd1: ALSA: pcm: Handle special page mapping in the default mmap handler Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20191108094641.20086-4-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-09ASoC: rt5514-spi: Convert to the common vmalloc memallocTakashi Iwai
The recent change (*) in the ALSA memalloc core allows us to drop the special vmalloc-specific allocation and page handling. This patch coverts to the common code. (*) 1fe7f397cfe2: ALSA: memalloc: Add vmalloc buffer allocation support 7e8edae39fd1: ALSA: pcm: Handle special page mapping in the default mmap handler Since it requires the specific buffer type (SNDRV_DMA_TYPE_VMALLOC), it's set in the pcm_new ops now. Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20191108094641.20086-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-09ASoC: Remove superfluous snd_dma_continuous_data()Takashi Iwai
The recent change (commit 08422d2c559d: "ALSA: memalloc: Allow NULL device for SNDRV_DMA_TYPE_CONTINOUS type") made the PCM preallocation helper accepting NULL as the device pointer for the default usage. Drop the snd_dma_continuous_data() usage that became superfluous from the callers. Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20191108094641.20086-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-09ALSA: pcm: Yet another missing check of non-cached buffer typeTakashi Iwai
For non-x86 architectures, SNDRV_DMA_TYPE_DEV_UC should be treated equivalent with SNDRV_DMA_TYPE_DEV, where the default mmap handler still checks only about SNDRV_DMA_TYPE_DEV. Make the check more proper. Note that all existing users of *_UC buffer types are x86-only, so this doesn't fix any bug, but just for consistency. Fixes: 42e748a0b325 ("ALSA: memalloc: Add non-cached buffer type") Link: https://lore.kernel.org/r/20191108165626.5947-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-08ALSA: timer: Fix possible race at assigning a timer instanceTakashi Iwai
When a new timer instance is created and assigned to the active link in snd_timer_open(), the caller still doesn't (can't) set its callback and callback data. In both the user-timer and the sequencer-timer code, they do manually set up the callbacks after calling snd_timer_open(). This has a potential risk of race when the timer instance is added to the already running timer target, as the callback might get triggered during setting up the callback itself. This patch tries to address it by changing the API usage slightly: - An empty timer instance is created at first via the new function snd_timer_instance_new(). This object isn't linked to the timer list yet. - The caller sets up the callbacks and others stuff for the new timer instance. - The caller invokes snd_timer_open() with this instance, so that it's linked to the target timer. For closing, do similarly: - Call snd_timer_close(). This unlinks the timer instance from the timer list. - Free the timer instance via snd_timer_instance_free() after that. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20191107192008.32331-4-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-08ALSA: timer: Make snd_timer_close() returning voidTakashi Iwai
The function doesn't return any useful value, so let's make it void to be clearer. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20191107192008.32331-3-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-08ALSA: timer: Unify master/slave linking codeTakashi Iwai
The code in both snd_timer_check_master() and snd_timer_check_slave() are almost identical, both check whether the master/slave link and does linkage. Factor out the common code and call it from both functions for readability. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20191107192008.32331-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-08ASoC: SOF: Intel: hda: set L1SEN on S0ix suspendKeyon Jie
Set L1SEN to make sure the system can enter S0ix, and restore it on resume. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191101170916.26517-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-08ASoC: SOF: topology: fix missing NULL pointer checkKeyon Jie
Add check to avoid possible NULL pointer dereference issue. This issue was reported by static analysis tools, we didn't face this issue but we can't rule it out either as a false positive. Reported-by: Keqiao Zhang <keqiao.zhang@intel.com> Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191101170916.26517-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-08ASoC: core: Fix compile warning with CONFIG_DEBUG_FS=nTakashi Iwai
Paper over a compile warning: sound/soc/soc-pcm.c:1185:8: warning: unused variable ‘name’ Fixes: 0632fa042541 ("ASoC: core: Fix pcm code debugfs error") Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20191107134833.1502-1-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 23:26:24 +0000