| Age | Commit message (Collapse) | Author |
|---|
|
With CONFIG_SND_SOC_SM8250=y and CONFIG_SND_SOC_QCOM_OFFLOAD_UTILS=m
selected in kconfig, the build will fail due to trying to link against a
symbol only found in the module.
aarch64-linux-gnu-ld: sound/soc/qcom/sm8250.o: in function `sm8250_snd_exit':
sound/soc/qcom/sm8250.c:52:(.text+0x210): undefined reference to `qcom_snd_usb_offload_jack_remove'
Fix this by declaring the dependency that forces CONFIG_SND_SOC_SM8250=m
when CONFIG_SND_SOC_QCOM_OFFLOAD_UTILS is =m.
Reported-by: Matthew Croughan <matthew.croughan@nix.how>
Fixes: 1b8d0d87b934 ("ASoC: qcom: qdsp6: Add headphone jack for offload connection status")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250617-snd-sm8250-dep-fix-v1-1-879af8906ec4@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The HP Pavilion Laptop 15-eg100 has Realtek HDA codec ALC287.
It needs the ALC287_FIXUP_HP_GPIO_LED quirk to enable the mute LED.
Signed-off-by: Yasmin Fitzgerald <sunoflife1.git@gmail.com>
Link: https://patch.msgid.link/20250621053832.52950-1-sunoflife1.git@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add audio quirks to fix speaker output and headset detection on the
following Clevo models:
- V350ENC
- V350WNPQ
- V540TU
- X560WNR
- X580WNS
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Link: https://patch.msgid.link/20250620204329.35878-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Positivo P15X is equipped with ALC269VC, and needs a fix to make
the headset mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20250619191215.17203-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A relatively large collection of fixes and updates that came in since
the merge window. Of note are a couple of Cirrus ones which change the
firmware naming for some newly added devices, and a fix from Laurentiu
for issues booting firmwares on the DSPs on i.MX8 SoCs.
|
|
It is better to print out the non supported num_dmics than printing that
it is not matching with 2 or 4.
Fixes: 2fbeff33381c ("ASoC: Intel: add sof_sdw_get_tplg_files ops")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250619104705.26057-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, the DSP core from i.MX8QM/i.MX8QXP is able to operate while the
firmware image is being loaded. Because of this, the DSP may change the
content of the firmware data just after it was loaded, thus leading to the
data having unexpected values when the DSP is reset (via run()).
Fix this by implementing the core_shutdown() operation that will put the
DSP in stall during suspend(). The stall will be removed during the run()
opertion, thus guaranteeing that the DSP core will not be able to run
while the firmware image is being loaded.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250613194310.1128733-1-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The GA605K has similar audio hardware to the GA403U so apply the
same quirk.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Tested-by: Timofey Titovets <nefelim4ag@gmail.com>
Link: https://github.com/alsa-project/alsa-ucm-conf/issues/578
Link: https://patch.msgid.link/20250613145251.397500-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Like many Dell laptops, the 3.5mm port by default can not detect a
combined headphones+mic headset or even a pure microphone. This
change enables the port's functionality.
Signed-off-by: Jonathan Lane <jon@borg.moe>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250611193124.26141-2-jon@borg.moe
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Make the internal microphone work on HP Victus laptops.
Signed-off-by: Raven Black <ravenblack@gmail.com>
Link: https://patch.msgid.link/20250613-support-hp-victus-microphone-v1-1-bebc4c3a2041@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Change the firmware filename format on SoundWire systems to
directly tie it to the physical amp it applies to. This is mainly
to decouple it from the ALSA prefix strings to avoid complications
when the SoundWire machine driver starts creating dailinks based on
SDCA Disco info instead of hardcoded match tables. It also avoids
errors from having to rename firmware files from a hardware-address
to a ALSA-prefix naming for Linux publication. There are already
published firmware files for the L56 B0 silicon so that has a fallback
scheme for backward compatibility which has been separated into its
own patch on top of the main change.
We'd like to get this into 6.16 so that the L63 support starts "clean"
with this new naming and we don't have to support one kernel version
with L63 using the old naming. Unfortunately we didn't manage to get
these patches through internal review and testing before the merge
window opened.
|
|
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20250612-apple-kconfig-defconfig-v1-10-0e6f9cb512c1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
PCM1 not in Pulseaudio's control list; standardize control to
"Speaker" and "Headphone".
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250613063636.239683-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
MSI Bravo 17 (D7VF), like other laptops from the family,
has broken ACPI tables and needs a quirk for internal mic
to work properly.
Signed-off-by: Gabriel Santese <santesegabriel@gmail.com>
Link: https://patch.msgid.link/20250530005444.23398-1-santesegabriel@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the SoundWire link number and device unique ID as the firmware file
qualifier suffix on CS35L56 B0 if .bin files are not found with the older
suffix. Some changes in wm_adsp needed to support this have been included
in this patch because they are trivial.
The allows future products with CS35L56 B0 silicon to use the same firmware
file naming as CS35L57 and cs35L63, while retaining backward compatibility
for firmware that has already been published with the old naming scheme.
The old suffix is searched first, partly because there are already many
files using that naming scheme, but also because they are a smaller subset
of all the possible fallback name options offered by wm_adsp so we know
that it will either find the qualified files or fail. All the firmware
files already published have the wmfw qualified with only the ACPI SSID and
the bin files qualified with both SSID and the suffix.
Originally, the firmware file names indicated which amplifier instance they
were for by appending the ALSA prefix string. This is the standard ASoC way
of distinguishing different instances of the same device. However, on
SoundWire systems the SoundWire physical unique address is available as a
unique identifier for each amp, and this address is hardwired by the
address pin on the amp.
The firmware files are specific for each physical amp so they must be
applied to that amp. Using the ALSA prefix for the filename qualifier means
that to name a firmware file it must be determined what prefix string the
machine driver will assign to each device and then use that to name the
firmware file correctly. This is straightforward in traditional ASoC
systems where the machine driver is specific to a particular piece of
hardware. But on SoundWire the machine driver is generic and can handle a
very wide range of hardware. It is more difficult to determine exactly what
the prefix will be on any particular production device, and more prone to
mistakes. Also, when the machine driver switches to generating this
automatically from SDCA properties in ACPI, there is an additional layer of
complexity in determining the mapping. This uncertainty is unnecessary
because the firmware is built for a specific amp. with known address, so we
can use that directly instead of introducing a redundant intermediate
alias. This ensures the firmware is applied to the amp it was intended for.
There are already many published firmware for CS35L56 B0 silicon so this
first looks for the original name suffix, to keep backward compatibility.
If this doesn't find .bin files it will switch to using the new name suffix
so that future products using CS35L56 B0 can start to use the new suffix.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612121428.1667-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the SoundWire link number and device unique ID as the firmware file
qualifier suffix on CS35L57, CS35L63 and revisions of CS35L56 after B0. The
change in wm_adsp needed to support this has been included in this patch
because it is fairly trivial.
Originally, the firmware file names indicated which amplifier instance they
were for by appending the ALSA prefix string. This is the standard ASoC way
of distinguishing different instances of the same device. However, on
SoundWire systems the SoundWire physical unique address is available as a
unique identifier for each amp, and this address is hardwired by a pin on
the amp.
The firmware files are specific for each physical amp so they must be
applied to that amp. Using the ALSA prefix for the filename qualifier means
that to name a firmware file it must be determined what prefix string the
machine driver will assign to each device and then use that to name the
firmware file correctly. This is straightforward in traditional ASoC
systems where the machine driver is specific to a particular piece of
hardware. But on SoundWire the machine driver is generic and can handle a
very wide range of hardware. It is more difficult to determine exactly what
the prefix will be on any particular production device, and more prone to
mistakes. Also, when the machine driver switches to generating this
automatically from SDCA properties in ACPI, there is an additional layer of
complexity in determining the mapping. This uncertainty is unnecessary
because the firmware is built for a specific amp. with known address, so we
can use that directly instead of introducing the redundant intermediate
alias. This ensures the firmware is applied to the amp it was intended for.
There have not been any firmwares published for CS35L57 or CS35L63, so
these can safely be switched to using the SoundWire unique address as the
suffix string. Also note that the machine driver in older kernel version
only has match entries for the CS35L56 Soundwire identity so any future
product with a cs35L57 or CS35L63 would require a new kernel anyway.
There are already many published firmware for CS35L56 B0 silicon so this
keeps the original naming scheme on those, to preserve backward
compatibility.
Note that although sdw_slave.id contains a unique_id field, this cannot
be trusted because the SoundWire core code also puts magic values into it
that it uses as a flag. So the unique ID is read from the chip register.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612121428.1667-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Check the return value of kzalloc() and exit early to avoid a potential
NULL pointer dereference.
Cc: stable@vger.kernel.org
Fixes: 4f8ef33dd44a ("ASoC: soc_sdw_utils: skip the endpoint that doesn't present")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250610103225.1475-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the DMA mode is changed on the (still real!) SB AWE32 after
playing a stream and closing, the previous DMA setup was still
silently kept, and it can confuse the hardware, resulting in the
unexpected noises. As a workaround, enforce the disablement of DMA
setups when the DMA setup is changed by the kcontrol.
https://bugzilla.kernel.org/show_bug.cgi?id=218185
Link: https://patch.msgid.link/20250610064322.26787-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When a PCM stream is already running, one shouldn't change the DMA
mode via kcontrol, which may screw up the hardware. Return -EBUSY
instead.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218185
Link: https://patch.msgid.link/20250610064322.26787-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The GU605C has similar audio hardware to the GU605M so apply the
same quirk.
Note that in the linked bugzilla there are two separate problems
with the GU605C. This patch fixes one of the problems, so I haven't
added a Closes: tag.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Nick Karaolidis <nick@karaolidis.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220152
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250609102125.63196-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The built-in mic of ASUS VivoBook X513EA is broken recently by the
fix of the pin sort. The fixup ALC256_FIXUP_ASUS_MIC_NO_PRESENCE
is working for addressing the regression, too.
Fixes: 3b4309546b48 ("ALSA: hda: Fix headset detection failure due to unstable sort")
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250610035607.690771-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Victus 15-fa1xxx
The mute led on those laptops is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the devices.
Tested on my Victus 16-s1011nt Laptop and my friend's Victus
15-fa1xxx. The LED behaviour works as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250609075943.13934-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
strcpy() is deprecated; use strscpy() instead. Use strscpy() to copy the
long name because there's no string to format with sprintf().
No functional changes intended.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Link: https://patch.msgid.link/20250606204000.8156-1-listout@listout.xyz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Lenovo Thinkpad E15 with Conexant CX8070 codec seems causing ugly
noises after runtime-PM suspend. Disable the codec runtime PM as a
workaround.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220210
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250608091415.21170-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After commit 25704938c86d7b2 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") and 1239f681359926101e ("scripts/misc-check:
check unnecessary #include <linux/export.h> when W=1"), we get some build
warnings with W=1:
sound/soc/loongson/loongson_i2s.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing
So fix these build warnings for ASoC/Loongson.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20250608142737.168829-1-chenhuacai@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Modify the value of ES8326_SDINOUT1_IO in the initialization
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20250604061821.2678-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is a type promotion that can happen when freq(u32) variable is
comapared with sclk_target(integer), when sclk_target is a negative
value it promotes to a large postive integer which might not be a
problem in this particular case as the condition evaluates to false
when that happens, but bail out early when sclk_target has negative
error codes.
cs48l32_sclk_rates[i].freq >= sclk_target
Fix this by adding a negative error check when
snd_soc_tdm_params_to_bclk() fails
Fixes: e2bcbf99d045 ("ASoC: cs48l32: Add driver for Cirrus Logic CS48L32 audio DSP")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20250603214813.197346-1-harshit.m.mogalapalli@oracle.com
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fix patches for the 6.16-rc1 merge window.
Most of changes are about ASoC, especially lots of AVS driver fixes.
Larger LOCs are seen in TAS571x codec drivers, but the changes are
trivial and safe. The rest are all device-specific small fixes"
* tag 'sound-fix-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ASoC: Intel: avs: boards: Fix rt5663 front end name
ASoC: Intel: avs: Simplify verification of parse_int_array() result
ALSA: usb-audio: Add implicit feedback quirk for RODE AI-1
ALSA: hda: Ignore unsol events for cards being shut down
ALSA: hda: Add new pci id for AMD GPU display HD audio controller
ALSA: hda: cs35l41: Constify regmap_irq_chip
ALSA: usb-audio: Add a quirk for Lenovo Thinkpad Thunderbolt 3 dock
ASoC: ti: omap-hdmi: Re-add dai_link->platform to fix card init
ASoC: pcm: Do not open FEs with no BEs connected
ASoC: rt1320: fix speaker noise when volume bar is 100%
ASoC: Intel: avs: Include missing string.h
ASoC: Intel: avs: Verify content returned by parse_int_array()
ASoC: Intel: avs: Verify kcalloc() status when setting constraints
ASoC: Intel: avs: Fix paths in MODULE_FIRMWARE hints
ASoC: Intel: avs: Fix possible null-ptr-deref when initing hw
ASoC: Intel: avs: Fix PPLCxFMT calculation
ASoC: Intel: avs: Fix deadlock when the failing IPC is SET_D0IX
ASoC: codecs: hda: Fix RPM usage count underflow
ASoC: amd: yc: Add support for Lenovo Yoga 7 16ARP8
ASoC: tas571x: fix tas5733 num_controls
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.16-rc1.
Included in here are the following:
- USB offload support for audio devices.
I think this takes the record for the most number of patch series
(30+) over the longest period of time (2+ years) to get merged
properly.
Many props go to Wesley Cheng for seeing this effort through, they
took a major out-of-tree hacked-up-monstrosity that was created by
multiple vendors for their specific devices, got it all merged into
a semi-coherent set of changes, and got all of the different major
subsystems to agree on how this should be implemented both with
changes to their code as well as userspace apis, AND wrangled the
hardware companies into agreeing to go forward with this, despite
making them all redo work they had already done in their private
device trees.
This feature offers major power savings on embedded devices where a
USB audio stream can continue to flow while the rest of the system
is sleeping, something that devices running on battery power really
care about. There are still some more small tweaks left to be done
here, and those patches are still out for review and arguing among
the different hardware companies, but this is a major step forward
and a great example of how to do upstream development well.
- small number of thunderbolt fixes and updates, things seem to be
slowing down here (famous last words...)
- xhci refactors and reworking to try to handle some rough corner
cases in some hardware implementations where things don't always
work properly
- typec driver updates
- USB3 power management reworking and updates
- Removal of some old and orphaned UDC gadget drivers that had not
been used in a very long time, dropping over 11 thousand lines from
the tree, always a nice thing, making up for the 12k lines added
for the USB offload feature.
- lots of little updates and fixes in different drivers
All of these have been in linux-next for over 2 weeks, the USB offload
logic has been in there for 8 weeks now, with no reported issues"
* tag 'usb-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
ALSA: usb-audio: qcom: fix USB_XHCI dependency
ASoC: qdsp6: fix compile-testing without CONFIG_OF
usb: misc: onboard_usb_dev: fix build warning for CONFIG_USB_ONBOARD_DEV_USB5744=n
usb: typec: tipd: fix typo in TPS_STATUS_HIGH_VOLAGE_WARNING macro
USB: typec: fix const issue in typec_match()
USB: gadget: udc: fix const issue in gadget_match_driver()
USB: gadget: fix up const issue with struct usb_function_instance
USB: serial: pl2303: add new chip PL2303GC-Q20 and PL2303GT-2AB
USB: serial: bus: fix const issue in usb_serial_device_match()
usb: usbtmc: Fix timeout value in get_stb
usb: usbtmc: Fix read_stb function and get_stb ioctl
ALSA: qc_audio_offload: try to reduce address space confusion
ALSA: qc_audio_offload: avoid leaking xfer_buf allocation
ALSA: qc_audio_offload: rename dma/iova/va/cpu/phys variables
ALSA: usb-audio: qcom: Fix an error handling path in qc_usb_audio_probe()
usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence
dt-bindings: usb: ti,usb8041: Add binding for TI USB8044 hub controller
usb: misc: onboard_usb_dev: Add support for TI TUSB8044 hub
usb: gadget: lpc32xx_udc: Use USB API functions rather than constants
usb: gadget: epautoconf: Use USB API functions rather than constants
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"A couple of small core changes and an Intel driver change:
- sdw_assign_device_num() logic simplification, using internal slave
id for irqs and optimizing computing of port params in specific
stream states
- Intel driver updates for ACE3+ microphone privacy status reporting
and enabling the status in HDA Intel driver"
* tag 'soundwire-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: only compute port params in specific stream states
ASoC: SOF: Intel: hda: Set the mic_privacy flag for soundwire with ACE3+
soundwire: intel: Add awareness of ACE3+ microphone privacy
soundwire: bus: Add internal slave ID and use for IRQs
soundwire: bus: Simplify sdw_assign_device_num()
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A bunch of fixes, including a big batch for the Intel AVS driver, and
one new device ID. It's all device specific.
|
|
Fix copy paste mistake in board name.
Fixes: f1e282c333ac ("ASoC: Intel: avs: boards: Change rt5663 card name")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://patch.msgid.link/20250603145244.871239-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The function return either success or an error code, no need to involve
'<' operator.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Medium range of fixes all avs-driver related. The most important fixes
lead the way:
1. For ASoC-hda codec driver, existing RPM manipulation in
hda_codec_probe_complete()'s error path is superfluous and leads to RPM
usage count underflow if the probe exists early e.g.: build-controls
operation fails.
2. Resolve deadlock when DSP-recovery is a consequence of SET_D0IX IPC.
The procedure handling IPC timeouts and EXCEPTION_CAUGHT notification
shall cancel any D0IX work before proceeding with DSP recovery. If
SET_D0IX called from delayed_work is the failing IPC the procedure will
deadlock.
3. LINK format (PPLCxFMT) calculation is incorrect.
HDAudio transfer types utilize SDxFMT for front-end (HOST) and PPLCxFMT
for back-end (LINK) side when setting up the stream. BE's
substream->runtime duplicates FE runtime so switch to using BE's
hw_params to address incorrect format values on the LINK side when FE
and BE formats differ.
Below three patches address problems found by Coverity static analyzer:
ASoC: Intel: avs: Fix possible null-ptr-deref when initing hw
ASoC: Intel: avs: Verify kcalloc() status when setting constraints
ASoC: Intel: avs: Verify content returned by parse_int_array()
While unlikely in runtime, it's good to keep code resilient. The last
few patches are readability/cohesiveness improvements.
|
|
The RODE AI-1 audio interface requires implicit feedback sync between
playback endpoint 0x03 and feedback endpoint 0x84 on interface 3, but
doesn't advertise this in its USB descriptors.
Without this quirk, the device receives audio data but produces no output.
Signed-off-by: David Heimann <d@dmeh.net>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/084dc88c-1193-4a94-a002-5599adff936c@app.fastmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For the classic snd_hda_intel driver, codec->card and bus->card point to
the exact same thing. When snd_card_diconnect() fires, bus->shutdown is
set thanks to azx_dev_disconnect(). card->shutdown is already set when
that happens but both provide basically the same functionality.
For the DSP snd_soc_avs driver where multiple codecs are located on
multiple cards, bus->shutdown 'shortcut' is not sufficient. One codec
card may be unregistered while other codecs are still operational.
Proper check in form of card->shutdown must be used to verify whether
the codec's card is being shut down.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141309.2943404-1-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add new pci id for AMD GPU display HD audio controller(device id- 0xab40).
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20250529053838.2350071-1-Vijendar.Mukunda@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Static 'struct regmap_irq_chip' is not modified so can be changed to
const for more safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250528194402.567062-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The audio controller in the Lenovo Thinkpad Thunderbolt 3 dock doesn't
support reading the sampling rate.
Add a quirk for it.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250527172657.1972565-1-superm1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The removed dai_link->platform component cause a fail which
is exposed at runtime. (ex: when a sound tool is used)
This patch re-adds the dai_link->platform component to have
a full card registered.
Before this patch:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: HDMI [HDMI], device 0: HDMI snd-soc-dummy-dai-0 []
Subdevices: 1/1
Subdevice #0: subdevice #0
$ speaker-test -D plughw:1,0 -t sine
speaker-test 1.2.8
Playback device is plughw:1,0
Stream parameters are 48000Hz, S16_LE, 1 channels
Sine wave rate is 440.0000Hz
Playback open error: -22,Invalid argument
After this patch which restores the platform component:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDMI], device 0: HDMI snd-soc-dummy-dai-0 [HDMI snd-soc-dummy-dai-0]
Subdevices: 0/1
Subdevice #0: subdevice #0
-> Resolve the playback error.
Fixes: 3b0db249cf8f ("ASoC: ti: remove unnecessary dai_link->platform")
Signed-off-by: Yuuki NAGAO <wf.yn386@gmail.com>
Link: https://patch.msgid.link/20250531141341.81164-1-wf.yn386@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The check is performed in prepare-step, that is dpcm_fe_dai_prepare()
but that is very late - code operates on invalid configuration from
dpcm_fe_dai_open() till it gets there. Relocate the check to the
open-step to avoid any invalid scenarios.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141231.2943351-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch updates the settings to fix the speaker noise.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250602085851.4081886-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
File loader.c utilizes strscpy().
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The first element of the returned array stores its length. If it is 0,
any manipulation beyond the element at index 0 ends with null-ptr-deref.
Fixes: 5a565ba23abe ("ASoC: Intel: avs: Probing and firmware tracing over debugfs")
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All memory operations shall be checked.
Fixes: f2f847461fb7 ("ASoC: Intel: avs: Constrain path based on BE capabilities")
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The binaries for cAVS architecture are located in "intel/avs"
subdirectory, not "intel".
Fixes: 94aa347d34e0 ("ASoC: Intel: avs: Add MODULE_FIRMWARE to inform about FW")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Search result of avs_dai_find_path_template() shall be verified before
being used. As 'template' is already known when
avs_hw_constraints_init() is fired, drop the search entirely.
Fixes: f2f847461fb7 ("ASoC: Intel: avs: Constrain path based on BE capabilities")
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
HDAudio transfer types utilize SDxFMT for front-end (HOST) and PPLCxFMT
for back-end (LINK) side when setting up the stream. BE's
substream->runtime duplicates FE runtime so switch to using BE's
hw_params to address incorrect format values on the LINK side when FE
and BE formats differ.
The problem is introduced with commit d070002a20fc ("ASoC: Intel: avs:
HDA PCM BE operations") but the code has been shuffled around since then
so direct 'Fixes:' tag does not apply.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The procedure handling IPC timeouts and EXCEPTION_CAUGHT notification
shall cancel any D0IX work before proceeding with DSP recovery. If
SET_D0IX called from delayed_work is the failing IPC the procedure will
deadlock. Conditionally skip cancelling the work to fix that.
Fixes: 335c4cbd201d ("ASoC: Intel: avs: D0ix power state support")
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250530141025.2942936-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
