| Age | Commit message (Collapse) | Author |
|---|
|
KVM Xen and pfncache changes for 6.9:
- Rip out the half-baked support for using gfn_to_pfn caches to manage pages
that are "mapped" into guests via physical addresses.
- Add support for using gfn_to_pfn caches with only a host virtual address,
i.e. to bypass the "gfn" stage of the cache. The primary use case is
overlay pages, where the guest may change the gfn used to reference the
overlay page, but the backing hva+pfn remains the same.
- Add an ioctl() to allow mapping Xen's shared_info page using an hva instead
of a gpa, so that userspace doesn't need to reconfigure and invalidate the
cache/mapping if the guest changes the gpa (but userspace keeps the resolved
hva the same).
- When possible, use a single host TSC value when computing the deadline for
Xen timers in order to improve the accuracy of the timer emulation.
- Inject pending upcall events when the vCPU software-enables its APIC to fix
a bug where an upcall can be lost (and to follow Xen's behavior).
- Fall back to the slow path instead of warning if "fast" IRQ delivery of Xen
events fails, e.g. if the guest has aliased xAPIC IDs.
- Extend gfn_to_pfn_cache's mutex to cover (de)activation (in addition to
refresh), and drop a now-redundant acquisition of xen_lock (that was
protecting the shared_info cache) to fix a deadlock due to recursively
acquiring xen_lock.
|
|
KVM x86 PMU changes for 6.9:
- Fix several bugs where KVM speciously prevents the guest from utilizing
fixed counters and architectural event encodings based on whether or not
guest CPUID reports support for the _architectural_ encoding.
- Fix a variety of bugs in KVM's emulation of RDPMC, e.g. for "fast" reads,
priority of VMX interception vs #GP, PMC types in architectural PMUs, etc.
- Add a selftest to verify KVM correctly emulates RDMPC, counter availability,
and a variety of other PMC-related behaviors that depend on guest CPUID,
i.e. are difficult to validate via KVM-Unit-Tests.
- Zero out PMU metadata on AMD if the virtual PMU is disabled to avoid wasting
cycles, e.g. when checking if a PMC event needs to be synthesized when
skipping an instruction.
- Optimize triggering of emulated events, e.g. for "count instructions" events
when skipping an instruction, which yields a ~10% performance improvement in
VM-Exit microbenchmarks when a vPMU is exposed to the guest.
- Tighten the check for "PMI in guest" to reduce false positives if an NMI
arrives in the host while KVM is handling an IRQ VM-Exit.
|
|
KVM selftests changes for 6.9:
- Add macros to reduce the amount of boilerplate code needed to write "simple"
selftests, and to utilize selftest TAP infrastructure, which is especially
beneficial for KVM selftests with multiple testcases.
- Add basic smoke tests for SEV and SEV-ES, along with a pile of library
support for handling private/encrypted/protected memory.
- Fix benign bugs where tests neglect to close() guest_memfd files.
|
|
KVM/riscv changes for 6.9
- Exception and interrupt handling for selftests
- Sstc (aka arch_timer) selftest
- Forward seed CSR access to KVM userspace
- Ztso extension support for Guest/VM
- Zacas extension support for Guest/VM
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.9
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized to
address serialization some of the serialization on the LPI injection
path
- Support for _architectural_ VHE-only systems, advertised through the
absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
|
|
KVM_FEATURE_PV_UNHALT is expected to get cleared from KVM PV feature CPUID
data when KVM_X86_DISABLE_EXITS_HLT is enabled. Add the corresponding test
to kvm_pv_test.
Note, the newly added code doesn't actually test KVM_FEATURE_PV_UNHALT and
KVM_X86_DISABLE_EXITS_HLT features.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240228101837.93642-4-vkuznets@redhat.com
[sean: add and use vcpu_cpuid_has()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The KVM RISC-V allows Zacas extension for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows Ztso extension for Guest/VM so add this
extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add a KVM selftests to validate the Sstc timer functionality.
The test was ported from arm64 arch timer test.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Move vcpu_has_ext to the processor.c and rename it to __vcpu_has_ext
so that other test cases can use it for vCPU extension check.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add guest_get_vcpuid() helper to simplify accessing to per-cpu
private data. The sscratch CSR was used to store the vcpu id.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Add the infrastructure for guest exception handling in riscv selftests.
Customized handlers can be enabled by vm_install_exception_handler(vector)
or vm_install_interrupt_handler().
The code is inspired from that of x86/arm64.
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Explicitly close() guest_memfd files in various guest_memfd and
private_mem_conversions tests, there's no reason to keep the files open
until the test exits.
Fixes: 8a89efd43423 ("KVM: selftests: Add basic selftest for guest_memfd()")
Fixes: 43f623f350ce ("KVM: selftests: Add x86-only selftest for private memory conversions")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Link: https://lore.kernel.org/r/20240227015716.27284-1-dongli.zhang@oracle.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
vpmu_counter_access's disable_counter() carries a bug that disables
all the counters that are enabled, instead of just the requested one.
Fortunately, it's not an issue as there are no callers of it. Hence,
instead of fixing it, remove the definition entirely.
Remove enable_counter() as it's unused as well.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20231122221526.2750966-1-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Extend sev_smoke_test to also run a minimal SEV-ES smoke test so that it's
possible to test KVM's unique VMRUN=>#VMEXIT path for SEV-ES guests
without needing a full blown SEV-ES capable VM, which requires a rather
absurd amount of properly configured collateral.
Punt on proper GHCB and ucall support, and instead use the GHCB MSR
protocol to signal test completion. The most important thing at this
point is to have _any_ kind of testing of KVM's __svm_sev_es_vcpu_run().
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Carlos Bilbao <carlos.bilbao@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a basic smoke test for SEV guests to verify that KVM can launch an
SEV guest and run a few instructions without exploding. To verify that
SEV is indeed enabled, assert that SEV is reported as enabled in
MSR_AMD64_SEV, a.k.a. SEV_STATUS, which cannot be intercepted by KVM
(architecturally enforced).
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Suggested-by: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
[sean: rename to "sev_smoke_test"]
Link: https://lore.kernel.org/r/20240223004258.3104051-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Port the existing intra-host SEV(-ES) migration test to the recently added
SEV library, which handles much of the boilerplate needed to create and
configure SEV guests.
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a library/APIs for creating and interfacing with SEV guests, all of
which need some amount of common functionality, e.g. an open file handle
for the SEV driver (/dev/sev), ioctl() wrappers to pass said file handle
to KVM, tracking of the C-bit, etc.
Add an x86-specific hook to initialize address properties, a.k.a. the
location of the C-bit. An arch specific hook is rather gross, but x86
already has a dedicated #ifdef-protected kvm_get_cpu_address_width() hook,
i.e. the ugliest code already exists.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add support for tagging and untagging guest physical address, e.g. to
allow x86's SEV and TDX guests to embed shared vs. private information in
the GPA. SEV (encryption, a.k.a. C-bit) and TDX (shared, a.k.a. S-bit)
steal bits from the guest's physical address space that is consumed by the
CPU metadata, i.e. effectively aliases the "real" GPA.
Implement generic "tagging" so that the shared vs. private metadata can be
managed by x86 without bleeding too many details into common code.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Allocate the common ucall pool using vm_vaddr_alloc_shared() so that the
ucall structures will be placed in shared (unencrypted) memory for VMs
with support for protected (encrypted) memory, e.g. x86's SEV.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
[sean: massage changelog]
Link: https://lore.kernel.org/r/20240223004258.3104051-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Test programs may wish to allocate shared vaddrs for things like
sharing memory with the guest. Since protected vms will have their
memory encrypted by default an interface is needed to explicitly
request shared pages.
Implement this by splitting the common code out from vm_vaddr_alloc()
and introducing a new vm_vaddr_alloc_shared().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerly Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add support for differentiating between protected (a.k.a. private, a.k.a.
encrypted) memory and normal (a.k.a. shared) memory for VMs that support
protected guest memory, e.g. x86's SEV. Provide and manage a common
bitmap for tracking whether a given physical page resides in protected
memory, as support for protected memory isn't x86 specific, i.e. adding a
arch hook would be a net negative now, and in the future.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Reviewed-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Originally-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add sparsebit_for_each_set_range() to allow iterator over a range of set
bits in a range. This will be used by x86 SEV guests to process protected
physical pages (each such page needs to be encrypted _after_ being "added"
to the VM).
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
[sean: split to separate patch]
Link: https://lore.kernel.org/r/20240223004258.3104051-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Make all sparsebit struct pointers "const" where appropriate. This will
allow adding a bitmap to track protected/encrypted physical memory that
tests can access in a read-only fashion.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
[sean: massage changelog]
Link: https://lore.kernel.org/r/20240223004258.3104051-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Carve out space in the @shape passed to the various VM creation helpers to
allow using the shape to control the subtype of VM, e.g. to identify x86's
SEV VMs (which are "regular" VMs as far as KVM is concerned).
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Ackerley Tng <ackerleytng@google.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Tested-by: Carlos Bilbao <carlos.bilbao@amd.com>
Link: https://lore.kernel.org/r/20240223004258.3104051-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use the kselftest_harness.h interface in this test to get TAP
output, so that it is easier for the user to see what the test
is doing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-9-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use the kvm_test_harness.h interface in this test to get TAP
output, so that it is easier for the user to see what the test
is doing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-8-thuth@redhat.com
[sean: make host_cap static]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use the kvm_test_harness.h interface in this test to get TAP
output, so that it is easier for the user to see what the test
is doing.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-7-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The sync_regs test currently does not have any output (unless one
of the TEST_ASSERT statement fails), so it's hard to say for a user
whether a certain new sub-test has been included in the binary or
not. Let's make this a little bit more user-friendly and include
some TAP output via the kselftest_harness.h / kvm_test_harness.h
interface.
To be able to use the interface, we have to break up the huge main()
function here in more fine grained parts - then we can use the new
KVM_ONE_VCPU_TEST() macro to define the individual tests. Since these
are run with a separate VM now, we have also to make sure to create
the expected state at the beginning of each test, so some parts grow
a little bit - which should be OK considering that the individual
tests are more self-contained now.
Suggested-by: David Matlack <dmatlack@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-6-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Most tests are currently not giving any proper output for the user
to see how much sub-tests have already been run, or whether new
sub-tests are part of a binary or not. So it would be good to
support TAP output in the KVM selftests. There is already a nice
framework for this in the kselftest_harness.h header which we can
use. But since we also need a vcpu in most KVM selftests, it also
makes sense to introduce our own wrapper around this which takes
care of creating a VM with one vcpu, so we don't have to repeat
this boilerplate in each and every test. Thus let's introduce
a KVM_ONE_VCPU_TEST() macro here which takes care of this.
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/Y2v+B3xxYKJSM%2FfH@google.com/
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-5-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extract the code to set a vCPU's entry point out of vm_arch_vcpu_add() and
into a new API, vcpu_arch_set_entry_point(). Providing a separate API
will allow creating a KVM selftests hardness that can handle tests that
use different entry points for sub-tests, whereas *requiring* the entry
point to be specified at vCPU creation makes it difficult to create a
generic harness, e.g. the boilerplate setup/teardown can't easily create
and destroy the VM and vCPUs.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-4-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The regs structure just accidentally contains the right values
from the previous test in the spot where we want to change rbx.
It's cleaner if we properly initialize the structure here before
using it.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-3-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
In the spots where we are expecting a successful run, we should
use vcpu_run() instead of _vcpu_run() to make sure that the run
did not fail.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20240208204844.119326-2-thuth@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Since only 64bit KVM selftests were supported on all architectures,
add the CONFIG_64BIT definition in kvm/Makefile to ensure only 64bit
definitions were available in the corresponding included files.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Split the arch-neutral test code out of aarch64/arch_timer.c
and put them into a common arch_timer.c. This is a preparation
to share timer test codes in riscv.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
There are intermittent failures occurred when stressing the
arch-timer test in a Qemu VM:
Guest assert failed, vcpu 0; stage; 4; iter: 3
==== Test Assertion Failure ====
aarch64/arch_timer.c:196: config_iter + 1 == irq_iter
pid=4048 tid=4049 errno=4 - Interrupted system call
1 0x000000000040253b: test_vcpu_run at arch_timer.c:248
2 0x0000ffffb60dd5c7: ?? ??:0
3 0x0000ffffb6145d1b: ?? ??:0
0x3 != 0x2 (config_iter + 1 != irq_iter)e
Further test and debug show that the timeout for an interrupt
to arrive do have random high fluctuation, espectially when
testing in an virtual environment.
To alleviate this issue, just expose the timeout value as user
configurable and print some hint message to increase the value
when hitting the failure..
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Change signed type to unsigned in test_args struct which
only make sense for unsigned value.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The introduction of $(SPLIT_TESTS) also introduced a warning when
building selftests on architectures that include get-reg-lists:
make: Entering directory '/root/kvm/tools/testing/selftests/kvm'
Makefile:272: warning: overriding recipe for target '/root/kvm/tools/testing/selftests/kvm/get-reg-list'
Makefile:267: warning: ignoring old recipe for target '/root/kvm/tools/testing/selftests/kvm/get-reg-list'
make: Leaving directory '/root/kvm/tools/testing/selftests/kvm'
In addition, the rule for $(SPLIT_TESTS_TARGETS) includes _all_
the $(SPLIT_TESTS_OBJS), which only works because there is just one.
So fix both by adjusting the rules:
- remove $(SPLIT_TESTS_TARGETS) from the $(TEST_GEN_PROGS) rules,
and rename it to $(SPLIT_TEST_GEN_PROGS)
- fix $(SPLIT_TESTS_OBJS) so that it plays well with $(OUTPUT),
rename it to $(SPLIT_TEST_GEN_OBJ), and list the object file
explicitly in the $(SPLIT_TEST_GEN_PROGS) link rule
Fixes: 17da79e009c3 ("KVM: arm64: selftests: Split get-reg-list test code", 2023-08-09)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
In Makefiles, $(error ), $(warning ), and $(info ) expand to the empty
string, as explained in the GNU Make manual [1]:
"The result of the expansion of this function is the empty string."
Therefore, they are no-op except for logging purposes.
$(shell ...) expands to the output of the command. It expands to the
empty string when the command does not print anything to stdout.
Hence, $(shell mkdir ...) is no-op except for creating the directory.
Remove meaningless assignments.
[1]: https://www.gnu.org/software/make/manual/make.html#Make-Control-Functions
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240221134201.2656908-1-masahiroy@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
|
|
If an integer's type has x bits, shifting the integer left by x or more
is undefined behavior.
This can happen in the rotate function when attempting to do a rotation
of the whole value by 0.
Fixes: 0dd714bfd200 ("KVM: s390: selftest: memop: Add cmpxchg tests")
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Link: https://lore.kernel.org/r/20240111094805.363047-1-nsg@linux.ibm.com
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20240111094805.363047-1-nsg@linux.ibm.com>
|
|
Extend set_memory_region_test's invalid flags subtest to verify that
GUEST_MEMFD is incompatible with READONLY. GUEST_MEMFD doesn't currently
support writes from userspace and KVM doesn't support emulated MMIO on
private accesses, and so KVM is supposed to reject the GUEST_MEMFD+READONLY
in order to avoid configuration that KVM can't support.
Link: https://lore.kernel.org/r/20240222190612.2942589-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Actually create a GUEST_MEMFD instance and pass it to KVM when doing
negative tests for KVM_SET_USER_MEMORY_REGION2 + KVM_MEM_GUEST_MEMFD.
Without a valid GUEST_MEMFD file descriptor, KVM_SET_USER_MEMORY_REGION2
will always fail with -EINVAL, resulting in false passes for any and all
tests of illegal combinations of KVM_MEM_GUEST_MEMFD and other flags.
Fixes: 5d74316466f4 ("KVM: selftests: Add a memory region subtest to validate invalid flags")
Link: https://lore.kernel.org/r/20240222190612.2942589-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
There is a selftest that checks for an (expected) error when an
invalid AR is specified, but not one that exercises the AR path.
Add a simple test that mirrors the vanilla write/read test while
providing an AR. An AR that contains zero will direct the CPU to
use the primary address space normally used anyway. AR[1] is
selected for this test because the host AR[1] is usually non-zero,
and KVM needs to correctly swap those values.
Reviewed-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Link: https://lore.kernel.org/r/20240220211211.3102609-3-farman@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
If the relevant capability (KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA) is present
then re-map vcpu_info using the HVA part way through the tests to make sure
then there is no functional change.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20240215152916.1158-16-paul@xen.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Using the HVA of the shared_info page is more efficient, so if the
capability (KVM_XEN_HVM_CONFIG_SHARED_INFO_HVA) is present use that method
to do the mapping.
NOTE: Have the juggle_shinfo_state() thread map and unmap using both
GFN and HVA, to make sure the older mechanism is not broken.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20240215152916.1158-15-paul@xen.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Although the fixed counter 3 and its exclusive pseudo slots event are
not supported by KVM yet, the architectural slots event is supported by
KVM and can be programmed on any GP counter. Thus add validation for this
architectural slots event.
Top-down slots event "counts the total number of available slots for an
unhalted logical processor, and increments by machine-width of the
narrowest pipeline as employed by the Top-down Microarchitecture
Analysis method."
As for the slot, it's an abstract concept which indicates how many
uops (decoded from instructions) can be processed simultaneously
(per cycle) on HW. In Top-down Microarchitecture Analysis (TMA) method,
the processor is divided into two parts, frond-end and back-end. Assume
there is a processor with classic 5-stage pipeline, fetch, decode,
execute, memory access and register writeback. The former 2 stages
(fetch/decode) are classified to frond-end and the latter 3 stages are
classified to back-end.
In modern Intel processors, a complicated instruction would be decoded
into several uops (micro-operations) and so these uops can be processed
simultaneously and then improve the performance. Thus, assume a
processor can decode and dispatch 4 uops in front-end and execute 4 uops
in back-end simultaneously (per-cycle), so the machine-width of this
processor is 4 and this processor has 4 topdown slots per-cycle.
If a slot is spare and can be used to process a new upcoming uop, then
the slot is available, but if a uop occupies a slot for several cycles
and can't be retired (maybe blocked by memory access), then this slot is
stall and unavailable.
Considering the testing instruction sequence can't be macro-fused on x86
platforms, the measured slots count should not be less than
NUM_INSNS_RETIRED. Thus assert the slots count against NUM_INSNS_RETIRED.
pmu_counters_test passed with this patch on Intel Sapphire Rapids.
About the more information about TMA method, please refer the below link.
https://www.intel.com/content/www/us/en/docs/vtune-profiler/cookbook/2023-0/top-down-microarchitecture-analysis-method.html
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20240218043003.2424683-1-dapeng1.mi@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
into HEAD
KVM selftests fixes/cleanups (and one KVM x86 cleanup) for 6.8:
- Remove redundant newlines from error messages.
- Delete an unused variable in the AMX test (which causes build failures when
compiling with -Werror).
- Fail instead of skipping tests if open(), e.g. of /dev/kvm, fails with an
error code other than ENOENT (a Hyper-V selftest bug resulted in an EMFILE,
and the test eventually got skipped).
- Fix TSC related bugs in several Hyper-V selftests.
- Fix a bug in the dirty ring logging test where a sem_post() could be left
pending across multiple runs, resulting in incorrect synchronization between
the main thread and the vCPU worker thread.
- Relax the dirty log split test's assertions on 4KiB mappings to fix false
positives due to the number of mappings for memslot 0 (used for code and
data that is NOT being dirty logged) changing, e.g. due to NUMA balancing.
- Have KVM's gtod_is_based_on_tsc() return "bool" instead of an "int" (the
function generates boolean values, and all callers treat the return value as
a bool).
|
|
Zenghui noted that the test assertion for the ISTATUS bit is printing
the current timer value instead of the control register in the case of
failure. While the assertion is sound, printing CNT isn't informative.
Change things around to actually print the CTL register value instead.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Closes: https://lore.kernel.org/kvmarm/3188e6f1-f150-f7d0-6c2b-5b7608b0b012@huawei.com/
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Link: https://lore.kernel.org/r/20240212210932.3095265-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Fix a pile of -Wformat warnings in the KVM ARM selftests code, almost all
of which are benign "long" versus "long long" issues (selftests are 64-bit
only, and the guest printf code treats "ll" the same as "l"). The code
itself isn't problematic, but the warnings make it impossible to build ARM
selftests with -Werror, which does detect real issues from time to time.
Opportunistically have GUEST_ASSERT_BITMAP_REG() interpret set_expected,
which is a bool, as an unsigned decimal value, i.e. have it print '0' or
'1' instead of '0x0' or '0x1'.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20240202234603.366925-1-seanjc@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
