| Age | Commit message (Collapse) | Author |
|---|
|
not crash on any platforms
While enabling branch stack for an event, BHRB (Branch History
Rolling Buffer) filter is set using bhrb_filter_map() callback.
This callback is not defined for cases like generic_compat_pmu
or in case where there is no PMU registered. A fix was added
in kernel to address a crash issue observed while enabling branch
stack for environments which doesn't have this callback.
commit b460b512417a ("powerpc/perf: Fix crashes with
generic_compat_pmu & BHRB").
Add perf sampling test to exercise this code path and make
sure enabling branch stack shouldn't crash in any platform.
Testcase uses software event cycles since software event is
available and can be used even in cases without PMU.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-11-atrajeev@linux.vnet.ibm.com
|
|
array size/PVR
The platform check for selftest support "check_pvr_for_sampling_tests"
is specific to sampling tests which includes PVR check, presence of
PMU and extended regs support. Extended regs support is needed for
sampling tests which tests whether PMU registers are programmed
correctly. There could be other sampling tests which may not need
extended regs, example, bhrb filter tests which only needs validity
check via event open.
Hence refactor the platform check to have a common function
"platform_check_for_tests" that checks only for PVR check
and presence of PMU. The existing function
"check_pvr_for_sampling_tests" will invoke the common function
and also will include checks for extended regs specific for
sampling. The common function can also be used by tests other
than sampling like event code tests.
Add macro to find array size ("ARRAY_SIZE") to sampling
tests "misc.h" file. This can be used in next tests to
find event array size. Also update "include/reg.h" to
add macros to find minor and major version from PVR which
will be used in testcases.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-10-atrajeev@linux.vnet.ibm.com
|
|
The testcase uses "instructions" event to generate the
samples and fetch Monitor Mode Control Register A (MMCRA)
when overflow. Branch History Rolling Buffer(bhrb) disable bit
is part of MMCRA which need to be verified by perf interface.
Testcase checks if the bhrb disable bit of MMCRA register is
programmed correctly via perf interface for ISA v3.1 platform
Also make get_mmcra_ifm return type as u64.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-9-atrajeev@linux.vnet.ibm.com
|
|
conditional branch type
The testcase uses "instructions" event to check if the
Instruction filtering mode(IFM) bits are programmed correctly
for conditional branch type. Testcase checks if IFM bits is
programmed correctly to Monitor Mode Control Register A (MMCRA)
via perf interface for ISA v3.1 platform.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-8-atrajeev@linux.vnet.ibm.com
|
|
type
The testcase uses "instructions" event to check if the
Instruction filtering mode(IFM) bits are programmed correctly
for type any branch. Testcase checks if IFM bits is
programmed correctly to Monitor Mode Control Register A (MMCRA)
via perf interface.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-7-atrajeev@linux.vnet.ibm.com
|
|
call type
The testcase uses "instructions" event to check if the
Instruction filtering mode(IFM) bits are programmed correctly
for indirect branch type. Testcase checks if IFM bits are
programmed correctly to Monitor Mode Control Register A (MMCRA)
via perf interface for ISA v3.1 platform.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-6-atrajeev@linux.vnet.ibm.com
|
|
Add support for sample type as PERF_SAMPLE_BRANCH_STACK in sampling
tests. This change is a precursor/helper for sampling testcases, that
test branck stack feature in perf interface.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-5-atrajeev@linux.vnet.ibm.com
|
|
The testcase uses event code 0x35340401e0 for load only sampling, to
verify the settings of thresh compare field in Monitor Mode Control
Register A (MMCRA: 9-18 bits for power9 and MMCRA: 8-18 bits for
power10). Testcase checks if the thresh compare field is programmed
correctly via perf interface to MMCRA register.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-4-atrajeev@linux.vnet.ibm.com
|
|
auxv to detect platform.
The /proc/self/auxv contains information about "platform" on any system.
Also "base platform" which is an indication about platform string
corresponding to the real PVR. When systems are booted in compat mode,
say, power10 booted in power9 mode, "platform" will point to power9
whereas base platform will point to power10. Incase, if the distro
doesn't support platform indicated by real PVR, base platform will have
a default value.
The mismatch of platform/base platform is an indication of system booted
in compat mode. In such cases, distro will have a Generic Compat
registered which supports basic features for performance monitoring.
Some of the selftest needs to be handled differently ( ex: generic
events, alternative events, bhrb filter map) in Generic Compat PMU.
Hence selftest framework needs utility functions to identify such cases.
One way is make sure of auxv information. Below condition can be used to
detect if Generic Compat PMU is registered. ie:
if ((AT_PLATFORM != AT_BASE_PLATFORM) && (AT_BASE_PLATFORM != PVR))
this indicates Generic Compat PMU.
Add utility function in "include/utils.h" to return:
AT_PLATFORM and AT_BASE_PLATFORM from auxv. Also update misc.c in
"sampling_tests" folder to add function to use above check to determine
presence of generic compat pmu.
In other architecture ( like x86 ), pmu_name is exposed via
"/sys/bus/event_source/devices/cpu/caps". The same could be used in
powerpc in future. Since currently we don't have the "caps" support in
powerpc, patch uses auxv information to detect platform type and compat
mode. But as placeholder utility function is added considering
possiblity of getting "caps" information via sysfs. If that doesn't
exist, fallback to using auxv information.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-3-atrajeev@linux.vnet.ibm.com
|
|
field
In power10, threshold compare field is not part of the raw event code
and provided via event attribute config1. Hence add the mask and shift
bits based on event attribute config1, to extract the threshold compare
value for power10
Also add a new function called get_thresh_cmp_val to compute and return
the threshold compare field for a given platform, since incase of
power10, threshold compare value provided is decimal.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220610134113.62991-2-atrajeev@linux.vnet.ibm.com
|
|
Commit 3752e453f6ba ("selftests/powerpc: Add tests of PMU EBBs") added
selftest testcases to verify EBB interface. instruction_count_test.c
testcase needs a fixed loop function to count overhead. Instead of using
the thirty_two_instruction_loop() in fixed_instruction_loop.S in ebb
folder, file is linked with thirty_two_instruction_loop() in loop.S from
top folder. Since fixed_instruction_loop.S not used, patch removes the
file.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220322045638.10443-1-maddy@linux.ibm.com
|
|
The function __perf_reg_mask has an unsigned return type, but returns a
negative constant to indicate an error condition. So we change unsigned
to int.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1650788802-14402-1-git-send-email-baihaowen@meizu.com
|
|
The testcase uses event code 0x35340401e0 to verify the settings for
different fields in Monitor Mode Control Register A (MMCRA). The fields
include thresh_start, thresh_stop thresh_select, sdar mode, sample and
marked bit. Checks if these fields are translated correctly via perf
interface to MMCRA.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-21-kjain@linux.ibm.com
|
|
The testcase uses event code 0x1340000001c040 to verify the settings for
different src fields in Monitor Mode Control Register 3 (MMCR3). Checks
if these fields are translated correctly via perf interface to MMCR3 on
ISA v3.1 platform.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-20-kjain@linux.ibm.com
|
|
The testcases uses cycles event to verify the freeze counter settings in
Monitor Mode Control Register 2 (MMCR2). Event modifier (exclude_kernel)
setting is used for the event attribute to check the FCxS and FCxH (
Freeze counter in privileged and hypervisor state ) settings via perf
interface.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add error checking, check MSR for MSR_HV, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-19-kjain@linux.ibm.com
|
|
The testcases uses event code 0x010000046080 to verify the l2l3 bit
setting for Monitor Mode Control Register 2 (MMCR2). check if this bit
is set correctly via perf interface in ISA v3.1 platform.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-18-kjain@linux.ibm.com
|
|
The testcase uses event code "0x26880" to verify the settings for
different fields in Monitor Mode Control Register 1 (MMCR1). The field
include PMCxCOMB. Checks if this field are translated correctly via perf
interface to MMCR1
Add selftest for mmcr1 comb field.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-16-kjain@linux.ibm.com
|
|
The testcase uses event code 0x500fa to verify the FC5-6 bit setting in
Monitor Mode Control Register 0 (MMCR0). Check if FC5-6 bit is not set
in MMCR0 when using Performance Monitor Counter 5 and 6 (PMC5 and PMC6).
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-15-kjain@linux.ibm.com
|
|
The testcase uses event code 0x1001e to verify two bit settings (FC5-6
and PMC1CE) in Monitor Mode Control Register 0 (MMCR0). Check if FC5-6
bit to be set in MMCR0 when not using Performance Monitor Counter 5 and
6 (PMC5 and PMC6). And also PMC1CE is expected to be set when using
PMC1. Test if these fields are programmed correctly via perf interface.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-14-kjain@linux.ibm.com
|
|
The testcase uses event code 0x500fa ("instructions") to verify the
PMCjCE bit setting in Monitor Mode Control Register 0 (MMCR0). This bit
is expected to be set in MMCR0 when using Performance Monitor Counter
5 (PMC5). Checks if perf interface sets this bit correctly.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-13-kjain@linux.ibm.com
|
|
The testcase uses cycles event to check the PMCCEXT bit setting in
Monitor Mode Control Register 0 (MMCR0). Check if perf interface sets
this control bit in MMCR0 on ISA v3.1 platform.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-12-kjain@linux.ibm.com
|
|
The testcase uses event code 0x500fa ("instructions") to check the
CC56RUN bit setting in Monitor Mode Control Register 0(MMCR0). In ISA
v3.1 platform, this bit is expected to be set in MMCR0 when using
Performance Monitor Counter 5 and 6 (PMC5 and PMC6). Verify this is done
correctly by perf interface.
CC56RUN bit makes PMC5 and PMC6 count regardless of the run latch state.
This bit is set in power10 since PMC5 and PMC6 is used in power10 for
counting instructions and cycles. Hence added a check to skip this test
in other platforms
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-11-kjain@linux.ibm.com
|
|
The testcase uses "instructions" event to verify two bits(PMAE and PMAO)
in Monitor Mode Control Register 0 (MMCR0). At the time of interrupt,
pmae bit ( which enables performance monitor exception ) is expected to
be cleared and pmao (which indicates performance monitor alert) bit is
expected to be set in MMCR0. And testcases handles these checks.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-10-kjain@linux.ibm.com
|
|
Add macro and utility functions to fetch individual fields from Monitor
Mode Control Register 3(MMCR3)and Monitor Mode Control Register A(MMCRA)
PMU registers
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-9-kjain@linux.ibm.com
|
|
Add macro and utility functions to fetch individual fields from Monitor
Mode Control Register 0(MMCR0) and Monitor Mode Control Register
1(MMCR1) PMU register.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-8-kjain@linux.ibm.com
|
|
Along with it, Add macros and utility functions to fetch individual
fields from Monitor Mode Control Register 2(MMCR2) register.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-7-kjain@linux.ibm.com
|
|
Extended event_init_opts() to include initialization of sampling
testcases. Patch adds an event_init_sampling() wrapper to initialize
event attribute fields for sampling events. This includes initializing
sample period, sample type and event type.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-6-kjain@linux.ibm.com
|
|
Add couple of basic utility functions to post process the mmap buffer.
It includes function to read the total number of samples present in the
mmap buffer and function to get the address of the first sample.
Add function "get_intr_regs" which will return pointer to interrupt
registers present in the sample, incase sample type
PERF_SAMPLE_REGS_INTR is set.
Add functions "get_reg_value" which can be used to read any interrupt
register value from a given sample.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-5-kjain@linux.ibm.com
|
|
Each platform has raw event encoding format which specifies the bit
positions for different fields. The fields from event code gets
translated into performance monitoring mode control register (MMCRx)
settings. Patch add macros to extract individual fields from the event
code.
Add functions for sanity checks, since testcases currently are only
supported in power9 and power10.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Read PVR directly rather than using /proc/cpuinfo]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-4-kjain@linux.ibm.com
|
|
Add support functions for enabling perf sampling test in a new folder
"sampling_tests" under "selftests/powerpc/pmu". This includes support
functions for allocating and processing the mmap buffer. These functions
are added/defined in "sampling_tests/misc.*" files.
Also updates the corresponding Makefiles in "selftests/powerpc" and
"sampling_tests" folder.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Drop unneeded bits from the Makefile]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-3-kjain@linux.ibm.com
|
|
To enable the capturing of samples as part of perf event, add a new
field "mmap_buffer" to "struct event". This field is a place-holder for
sample collection
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-2-kjain@linux.ibm.com
|
|
With the MMCR0 control bit (PMCCEXT) in ISA v3.1, read access to
group B registers is restricted when MMCR0 PMCC=0b00. In other
platforms (like power9), the older behaviour works where group B
PMU SPRs are readable.
Patch creates a selftest which verifies that the test takes a
SIGILL when attempting to read PMU registers via helper function
"dump_ebb_state" for ISA v3.1.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1621950703-1532-3-git-send-email-atrajeev@linux.vnet.ibm.com
|
|
The "no_handler_test" in ebb selftests attempts to read the PMU
registers twice via helper function "dump_ebb_state". First dump is
just before closing of event and the second invocation is done after
closing of the event. The original intention of second
dump_ebb_state was to dump the state of registers at the end of
the test when the counters are frozen. But this will be achieved
with the first call itself since sample period is set to low value
and PMU will be frozen by then. Hence patch removes the
dump which was done before closing of the event.
Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com <mailto:rnsastry@linux.ibm.com>>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1621950703-1532-2-git-send-email-atrajeev@linux.vnet.ibm.com
|
|
Function 'event_ebb_init' and 'event_leader_ebb_init' are declared
twice in the header file, so remove the repeated declaration.
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1622529385-5938-1-git-send-email-zhangshaokun@hisilicon.com
|
|
Since commit 57fd251c7896 ("kbuild: split cc-option and friends to
scripts/Makefile.compiler"), some kselftests fail to build.
The tools/ directory opted out Kbuild, and went in a different
direction. People copied scripts and Makefiles to the tools/ directory
to create their own build system.
tools/build/Build.include mimics scripts/Kbuild.include, but some
tool Makefiles include the Kbuild one to import a feature that is
missing in tools/build/Build.include:
- Commit ec04aa3ae87b ("tools/thermal: tmon: use "-fstack-protector"
only if supported") included scripts/Kbuild.include from
tools/thermal/tmon/Makefile to import the cc-option macro.
- Commit c2390f16fc5b ("selftests: kvm: fix for compilers that do
not support -no-pie") included scripts/Kbuild.include from
tools/testing/selftests/kvm/Makefile to import the try-run macro.
- Commit 9cae4ace80ef ("selftests/bpf: do not ignore clang
failures") included scripts/Kbuild.include from
tools/testing/selftests/bpf/Makefile to import the .DELETE_ON_ERROR
target.
- Commit 0695f8bca93e ("selftests/powerpc: Handle Makefile for
unrecognized option") included scripts/Kbuild.include from
tools/testing/selftests/powerpc/pmu/ebb/Makefile to import the
try-run macro.
Copy what they need into tools/build/Build.include, and make them
include it instead of scripts/Kbuild.include.
Link: https://lore.kernel.org/lkml/86dadf33-70f7-a5ac-cb8c-64966d2f45a1@linux.ibm.com/
Fixes: 57fd251c7896 ("kbuild: split cc-option and friends to scripts/Makefile.compiler")
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
|
|
This is a test of specific piece of logic in isa207-common.c, which is
only used on Power8 or later. So skip it on older CPUs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015727.1977134-7-mpe@ellerman.id.au
|
|
utils.h provides have_hwcap() and have_hwcap2() which check for a
feature bit. Those bits are defined in asm/cputable.h, so include it
in utils.h so users of utils.h don't have to do it manually.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200819015727.1977134-4-mpe@ellerman.id.au
|
|
Some of our tests use VSX or newer VMX instructions, so need to be
skipped on older CPUs to avoid SIGILL'ing.
Similarly TAR was added in v2.07, and the PMU event used in the stcx
fail test only works on Power8 or later.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200803020719.96114-1-mpe@ellerman.id.au
|
|
We have custom stack expansion checks that it turns out are extremely
badly tested and contain bugs, surprise. So add some tests that
exercise the code and capture the current boundary conditions.
The signal test currently fails on 64-bit kernels because the 2048
byte allowance for the signal frame is too small, we will fix that in
a subsequent patch.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724092528.1578671-1-mpe@ellerman.id.au
|
|
The per_event_excludes test wants to run on Power8 or later. But
currently it checks that AT_BASE_PLATFORM *equals* power8, which means
it only runs on Power8.
Fix it to check for the ISA 2.07 feature, which will be set on Power8
and later CPUs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200716122142.3776261-1-mpe@ellerman.id.au
|
|
Merge our fixes branch, primarily to bring in the ebb selftests build
fix and the pkey fix, which is a dependency for some future work.
|
|
An extra count on ebb_state.stats.pmc_count[PMC_INDEX(pmc)] is being per-
formed when count_pmc() is used to reset PMCs on a few selftests. This
extra pmc_count can occasionally invalidate results, such as the ones from
cycles_test shown hereafter. The ebb_check_count() failed with an above
the upper limit error due to the extra value on ebb_state.stats.pmc_count.
Furthermore, this extra count is also indicated by extra PMC1 trace_log on
the output of the cycle test (as well as on pmc56_overflow_test):
==========
...
[21]: counter = 8
[22]: register SPRN_MMCR0 = 0x0000000080000080
[23]: register SPRN_PMC1 = 0x0000000080000004
[24]: counter = 9
[25]: register SPRN_MMCR0 = 0x0000000080000080
[26]: register SPRN_PMC1 = 0x0000000080000004
[27]: counter = 10
[28]: register SPRN_MMCR0 = 0x0000000080000080
[29]: register SPRN_PMC1 = 0x0000000080000004
>> [30]: register SPRN_PMC1 = 0x000000004000051e
PMC1 count (0x280000546) above upper limit 0x2800003e8 (+0x15e)
[FAIL] Test FAILED on line 52
failure: cycles
==========
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200626164737.21943-1-desnesn@linux.ibm.com
|
|
We use OUTPUT directory as TMPOUT for checking no-pie option.
Since commit f2f02ebd8f38 ("kbuild: improve cc-option to clean up all
temporary files") when building powerpc/ from selftests directory, the
OUTPUT directory points to powerpc/pmu/ebb/ and gets removed when
checking for -no-pie option in try-run routine, subsequently build
fails with the following:
$ make -C powerpc
...
TARGET=ebb; BUILD_TARGET=$OUTPUT/$TARGET; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C $TARGET all
make[2]: Entering directory '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb'
make[2]: *** No rule to make target 'Makefile'.
make[2]: Failed to remake makefile 'Makefile'.
make[2]: *** No rule to make target 'ebb.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'ebb_handler.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'trace.c', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: *** No rule to make target 'busy_loop.S', needed by '/home/linux-master/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test'.
make[2]: Target 'all' not remade because of errors.
Fix this by adding a suffix to the OUTPUT directory so that the
failure is avoided.
Fixes: 9686813f6e9d ("selftests/powerpc: Fix try-run when source tree is not writable")
Signed-off-by: Harish <harish@linux.ibm.com>
[mpe: Mention that commit that triggered the breakage]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200625165721.264904-1-harish@linux.ibm.com
|
|
This is based on the count_instructions test.
However this one also counts the number of failed stcx's, and in
conjunction with knowing the size of the stcx loop, can calculate the
total number of instructions executed even in the face of
non-deterministic stcx failures.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200426114410.3917383-1-mpe@ellerman.id.au
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200507185755.GA15014@embeddedor
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Slightly late as I had to rebase mid-week to insert a bug fix:
- A large series from Nick for 64-bit to further rework our exception
vectors, and rewrite portions of the syscall entry/exit and
interrupt return in C. The result is much easier to follow code
that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had
become badly intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings
from the workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and
update the status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
Datwyler, Vaibhav Jain, YueHaibing"
* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
powerpc: Make setjmp/longjmp signature standard
powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
powerpc: Suppress .eh_frame generation
powerpc: Drop -fno-dwarf2-cfi-asm
powerpc/32: drop unused ISA_DMA_THRESHOLD
powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
selftests/powerpc: Fix try-run when source tree is not writable
powerpc/vmlinux.lds: Explicitly retain .gnu.hash
powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
powerpc/ptrace: create ppc_gethwdinfo()
powerpc/ptrace: create ptrace_get_debugreg()
powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
powerpc/ptrace: move register viewing functions out of ptrace.c
powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
powerpc/ptrace: split out SPE related functions.
powerpc/ptrace: split out ALTIVEC related functions.
powerpc/ptrace: split out VSX related functions.
powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
powerpc/ptrace: remove unused header includes
...
|
|
We added a usage of try-run to pmu/ebb/Makefile to detect if the
toolchain supported the -no-pie option.
This fails if we build out-of-tree and the source tree is not
writable, as try-run tries to write its temporary files to the current
directory. That leads to the -no-pie option being silently dropped,
which leads to broken executables with some toolchains.
If we remove the redirect to /dev/null in try-run, we see the error:
make[3]: Entering directory '/linux/tools/testing/selftests/powerpc/pmu/ebb'
/usr/bin/ld: cannot open output file .54.tmp: Read-only file system
collect2: error: ld returned 1 exit status
make[3]: Nothing to be done for 'all'.
And looking with strace we see it's trying to use a file that's in the
source tree:
lstat("/linux/tools/testing/selftests/powerpc/pmu/ebb/.54.tmp", 0x7ffffc0f83c8)
We can fix it by setting TMPOUT to point to the $(OUTPUT) directory,
and we can verify with strace it's now trying to write to the output
directory:
lstat("/output/kselftest/powerpc/pmu/ebb/.54.tmp", 0x7fffd1bf6bf8)
And also see that the -no-pie option is now correctly detected.
Fixes: 0695f8bca93e ("selftests/powerpc: Handle Makefile for unrecognized option")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200327095319.2347641-1-mpe@ellerman.id.au
|
|
Add SPDX License Identifier to all .gitignore files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On older distributions like Sles12SP5 gcc does not recognize
-no-pie option making the powerpc selftests build to fail
Fixes the following:
gcc: error: unrecognized command line option ‘-no-pie’
Signed-off-by: Harish <harish@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191113094219.14946-1-harish@linux.ibm.com
|
|
Based on 1 normalized pattern(s):
licensed under gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 99 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170027.163048684@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
