summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)Author
2020-01-25selftests: mlxsw: Add a TBF selftestPetr Machata
Add a test that runs traffic across a port throttled with TBF. The test checks that the observed throughput is within +-5% from the installed shaper. To allow checking both the software datapath and the offloaded one, make the test suitable for inclusion from driver-specific wrapper. Introduce such wrappers for mlxsw. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25selftests: forwarding: lib: Allow reading TC rule byte countersPetr Machata
The function tc_rule_stats_get() fetches a packet counter of a given TC rule. Extend it to support byte counters as well by adding an optional argument with selector. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25selftests: forwarding: lib: Add helpers for busywaitingPetr Machata
The function busywait() is handy as a safety-latched variant of a while loop. Many selftests deal specifically with counter values, and busywaiting on them is likely to be rather common (it is not quite common now, but busywait() has not been around for very long). To facilitate expressing simply what is tested, introduce two helpers: - until_counter_is(), which can be used as a predicate passed to busywait(), which holds when expression, which is itself passed as an argument to until_counter_is(), reaches a desired value. - busywait_for_counter(), which is useful for waiting until a given counter changes "by" (as opposed to "to") a certain amount. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25selftests: Move two functions from mlxsw's qos_lib to libPetr Machata
The function humanize() is used for converting value in bits/s to a human-friendly approximate value in Kbps, Mbps or Gbps. There is nothing hardware-specific in that, so move the function to lib.sh. Similarly for the rate() function, which just does a bit of math to calculate a rate, given two counter values and a time interval. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Expedited grace-period updates - kfree_rcu() updates - RCU list updates - Preemptible RCU updates - Torture-test updates - Miscellaneous fixes - Documentation updates Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-01-24selftests: bpf: Reset global state between reuseport test runsLorenz Bauer
Currently, there is a lot of false positives if a single reuseport test fails. This is because expected_results and the result map are not cleared. Zero both after individual test runs, which fixes the mentioned false positives. Fixes: 91134d849a0e ("bpf: Test BPF_PROG_TYPE_SK_REUSEPORT") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200124112754.19664-5-lmb@cloudflare.com
2020-01-24selftests: bpf: Make reuseport test output more legibleLorenz Bauer
Include the name of the mismatching result in human readable format when reporting an error. The new output looks like the following: unexpected result result: [1, 0, 0, 0, 0, 0] expected: [0, 0, 0, 0, 0, 0] mismatch on DROP_ERR_INNER_MAP (bpf_prog_linum:153) check_results:FAIL:382 Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200124112754.19664-4-lmb@cloudflare.com
2020-01-24selftests: bpf: Ignore FIN packets for reuseport testsLorenz Bauer
The reuseport tests currently suffer from a race condition: FIN packets count towards DROP_ERR_SKB_DATA, since they don't contain a valid struct cmd. Tests will spuriously fail depending on whether check_results is called before or after the FIN is processed. Exit the BPF program early if FIN is set. Fixes: 91134d849a0e ("bpf: Test BPF_PROG_TYPE_SK_REUSEPORT") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200124112754.19664-3-lmb@cloudflare.com
2020-01-24selftests: bpf: Use a temporary file in test_sockmapLorenz Bauer
Use a proper temporary file for sendpage tests. This means that running the tests doesn't clutter the working directory, and allows running the test on read-only filesystems. Fixes: 16962b2404ac ("bpf: sockmap, add selftests") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200124112754.19664-2-lmb@cloudflare.com
2020-01-24mptcp: add basic kselftest for mptcpFlorian Westphal
Add mptcp_connect tool: xmit two files back and forth between two processes, several net namespaces including some adding delays, losses and reordering. Wrapper script tests that data was transmitted without corruption. The "-c" command line option for mptcp_connect.sh is there for debugging: The script will use tcpdump to create one .pcap file per test case, named according to the namespaces, protocols, and connect address in use. For example, the first test case writes the capture to ns1-ns1-MPTCP-MPTCP-10.0.1.1.pcap. The stderr output from tcpdump is printed after the test completes to show tcpdump's "packets dropped by kernel" information. Also check that userspace can't create MPTCP sockets when mptcp.enabled sysctl is off. The "-b" option allows to tune/lower send buffer size. "-m mmap" can be used to test blocking io. Default is non-blocking io using read/write/poll. Will run automatically on "make kselftest". Note that the default timeout of 45 seconds is used even if there is a "settings" changing it to 450. 45 seconds should be enough in most cases but this depends on the machine running the tests. A fix to correctly read the "settings" file has been proposed upstream but not applied yet. It is not blocking the execution of these new tests but it would be nice to have it: https://patchwork.kernel.org/patch/11204935/ Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24selftests/bpf: Improve bpftool changes detectionAndrii Nakryiko
Detect when bpftool source code changes and trigger rebuild within selftests/bpf Makefile. Also fix few small formatting problems. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200124054148.2455060-1-andriin@fb.com
2020-01-24selftests/bpf: Initialize duration variable before usingJohn Sperbeck
The 'duration' variable is referenced in the CHECK() macro, and there are some uses of the macro before 'duration' is set. The clang compiler (validly) complains about this. Sample error: .../selftests/bpf/prog_tests/fexit_test.c:23:6: warning: variable 'duration' is uninitialized when used here [-Wuninitialized] if (CHECK(err, "prog_load sched cls", "err %d errno %d\n", err, errno)) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .../selftests/bpf/test_progs.h:134:25: note: expanded from macro 'CHECK' if (CHECK(err, "prog_load sched cls", "err %d errno %d\n", err, errno)) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _CHECK(condition, tag, duration, format) ^~~~~~~~ Signed-off-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20200123235144.93610-1-sdf@google.com
2020-01-23selftests/powerpc: Enable range tests on 8xx in ptrace-hwbreak.c selftestChristophe Leroy
8xx is now able to support any range length so range tests can be enabled. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/081e3b4e3a17a8ec9fdac46b505e3a29ca15f209.1574790198.git.christophe.leroy@c-s.fr
2020-01-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-01-22 The following pull-request contains BPF updates for your *net-next* tree. We've added 92 non-merge commits during the last 16 day(s) which contain a total of 320 files changed, 7532 insertions(+), 1448 deletions(-). The main changes are: 1) function by function verification and program extensions from Alexei. 2) massive cleanup of selftests/bpf from Toke and Andrii. 3) batched bpf map operations from Brian and Yonghong. 4) tcp congestion control in bpf from Martin. 5) bulking for non-map xdp_redirect form Toke. 6) bpf_send_signal_thread helper from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-22bpf: tcp: Add bpf_cubic exampleMartin KaFai Lau
This patch adds a bpf_cubic example. Some highlights: 1. CONFIG_HZ .kconfig map is used. 2. In bictcp_update(), calculation is changed to use usec resolution (i.e. USEC_PER_JIFFY) instead of using jiffies. Thus, usecs_to_jiffies() is not used in the bpf_cubic.c. 3. In bitctcp_update() [under tcp_friendliness], the original "while (ca->ack_cnt > delta)" loop is changed to the equivalent "ca->ack_cnt / delta" operation. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200122233658.903774-1-kafai@fb.com
2020-01-22selftests/bpf: Add tests for program extensionsAlexei Starovoitov
Add program extension tests that build on top of fexit_bpf2bpf tests. Replace three global functions in previously loaded test_pkt_access.c program with three new implementations: int get_skb_len(struct __sk_buff *skb); int get_constant(long val); int get_skb_ifindex(int val, struct __sk_buff *skb, int var); New function return the same results as original only if arguments match. new_get_skb_ifindex() demonstrates that 'skb' argument doesn't have to be first and only argument of BPF program. All normal skb based accesses are available. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/20200121005348.2769920-4-ast@kernel.org
2020-01-22selftests/bpf: Build urandom_read with LDFLAGS and LDLIBSDaniel Díaz
During cross-compilation, it was discovered that LDFLAGS and LDLIBS were not being used while building binaries, leading to defaults which were not necessarily correct. OpenEmbedded reported this kind of problem: ERROR: QA Issue: No GNU_HASH in the ELF binary [...], didn't pass LDFLAGS? Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: John Fastabend <john.fastabend@gmail.com>
2020-01-20selftests: Refactor build to remove tools/lib/bpf from include pathToke Høiland-Jørgensen
To make sure no new files are introduced that doesn't include the bpf/ prefix in its #include, remove tools/lib/bpf from the include path entirely. Instead, we introduce a new header files directory under the scratch tools/ dir, and add a rule to run the 'install_headers' rule from libbpf to have a full set of consistent libbpf headers in $(OUTPUT)/tools/include/bpf, and then use $(OUTPUT)/tools/include as the include path for selftests. For consistency we also make sure we put all the scratch build files from other bpftool and libbpf into tools/build/, so everything stays within selftests/. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/157952561246.1683545.2762245552022369203.stgit@toke.dk
2020-01-20selftests: Use consistent include paths for libbpfToke Høiland-Jørgensen
Fix all selftests to include libbpf header files with the bpf/ prefix, to be consistent with external users of the library. Also ensure that all includes of exported libbpf header files (those that are exported on 'make install' of the library) use bracketed includes instead of quoted. To not break the build, keep the old include path until everything has been changed to the new one; a subsequent patch will remove that. Fixes: 6910d7d3867a ("selftests/bpf: Ensure bpf_helper_defs.h are taken from selftests dir") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/157952560568.1683545.9649335788846513446.stgit@toke.dk
2020-01-20selftests: Pass VMLINUX_BTF to runqslower MakefileToke Høiland-Jørgensen
Add a VMLINUX_BTF variable with the locally-built path when calling the runqslower Makefile from selftests. This makes sure a simple 'make' invocation in the selftests dir works even when there is no BTF information for the running kernel. Do a wildcard expansion and include the same paths for BTF for the running kernel as in the runqslower Makefile, to make it possible to build selftests without having a vmlinux in the local tree. Also fix the make invocation to use $(OUTPUT)/tools as the destination directory instead of $(CURDIR)/tools. Fixes: 3a0d3092a4ed ("selftests/bpf: Build runqslower from selftests") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/157952560344.1683545.2723631988771664417.stgit@toke.dk
2020-01-20selftests/bpf: Skip perf hw events test if the setup disabled itHangbin Liu
The same with commit 4e59afbbed96 ("selftests/bpf: skip nmi test when perf hw events are disabled"), it would make more sense to skip the test_stacktrace_build_id_nmi test if the setup (e.g. virtual machines) has disabled hardware perf events. Fixes: 13790d1cc72c ("bpf: add selftest for stackmap with build_id in NMI context") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200117100656.10359-1-liuhangbin@gmail.com
2020-01-20selftests/bpf: Don't check for btf fd in test_btfStanislav Fomichev
After commit 0d13bfce023a ("libbpf: Don't require root for bpf_object__open()") we no longer load BTF during bpf_object__open(), so let's remove the expectation from test_btf that the fd is not -1. The test currently fails. Before: BTF libbpf test[1] (test_btf_haskv.o): do_test_file:4152:FAIL bpf_object__btf_fd: -1 BTF libbpf test[2] (test_btf_newkv.o): do_test_file:4152:FAIL bpf_object__btf_fd: -1 BTF libbpf test[3] (test_btf_nokv.o): do_test_file:4152:FAIL bpf_object__btf_fd: -1 After: BTF libbpf test[1] (test_btf_haskv.o): OK BTF libbpf test[2] (test_btf_newkv.o): OK BTF libbpf test[3] (test_btf_nokv.o): OK Fixes: 0d13bfce023a ("libbpf: Don't require root for bpf_object__open()") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200118010546.74279-1-sdf@google.com
2020-01-20Backmerge v5.5-rc7 into drm-nextDave Airlie
msm needs 5.5-rc4, go to the latest. Signed-off-by: Dave Airlie <airlied@redhat.com>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2020-01-19selftests: devlink_trap_tunnel_vxlan: Add test case for overlay_smac_is_mcAmit Cohen
Test that the trap is triggered under the right conditions and that devlink counters increase when action is trap. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19selftests: devlink_trap_tunnel_ipip: Add test case for decap_errorAmit Cohen
Test that the trap is triggered under the right conditions and that devlink counters increase. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19selftests: devlink_trap_tunnel_vxlan: Add test case for decap_errorAmit Cohen
Test that the trap is triggered under the right conditions and that devlink counters increase. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19selftests: devlink_trap_l3_drops: Add test cases of irif and erif disabledAmit Cohen
Add test cases to check that packets routed through disabled RIFs and packets routed from disabled RIFs are dropped and devlink counters increase when the action is trap. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-18selftests: add openat2(2) selftestsAleksa Sarai
Test all of the various openat2(2) flags. A small stress-test of a symlink-rename attack is included to show that the protections against ".."-based attacks are sufficient. The main things these self-tests are enforcing are: * The struct+usize ABI for openat2(2) and copy_struct_from_user() to ensure that upgrades will be handled gracefully (in addition, ensuring that misaligned structures are also handled correctly). * The -EINVAL checks for openat2(2) are all correctly handled to avoid userspace passing unknown or conflicting flag sets (most importantly, ensuring that invalid flag combinations are checked). * All of the RESOLVE_* semantics (including errno values) are correctly handled with various combinations of paths and flags. * RESOLVE_IN_ROOT correctly protects against the symlink rename(2) attack that has been responsible for several CVEs (and likely will be responsible for several more). Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-01-16selftests/bpf: Fix test_progs send_signal flakiness with nmi modeYonghong Song
Alexei observed that test_progs send_signal may fail if run with command line "./test_progs" and the tests will pass if just run "./test_progs -n 40". I observed similar issue with nmi subtest failure and added a delay 100 us in Commit ab8b7f0cb358 ("tools/bpf: Add self tests for bpf_send_signal_thread()") and the problem is gone for me. But the issue still exists in Alexei's testing environment. The current code uses sample_freq = 50 (50 events/second), which may not be enough. But if the sample_freq value is larger than sysctl kernel/perf_event_max_sample_rate, the perf_event_open syscall will fail. This patch changed nmi perf testing to use sample_period = 1, which means trying to sampling every event. This seems fixing the issue. Fixes: ab8b7f0cb358 ("tools/bpf: Add self tests for bpf_send_signal_thread()") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200116174004.1522812-1-yhs@fb.com
2020-01-16kselftest: Minimise dependency of get_size on C library interfacesSiddhesh Poyarekar
It was observed[1] on arm64 that __builtin_strlen led to an infinite loop in the get_size selftest. This is because __builtin_strlen (and other builtins) may sometimes result in a call to the C library function. The C library implementation of strlen uses an IFUNC resolver to load the most efficient strlen implementation for the underlying machine and hence has a PLT indirection even for static binaries. Because this binary avoids the C library startup routines, the PLT initialization never happens and hence the program gets stuck in an infinite loop. On x86_64 the __builtin_strlen just happens to expand inline and avoid the call but that is not always guaranteed. Further, while testing on x86_64 (Fedora 31), it was observed that the test also failed with a segfault inside write() because the generated code for the write function in glibc seems to access TLS before the syscall (probably due to the cancellation point check) and fails because TLS is not initialised. To mitigate these problems, this patch reduces the interface with the C library to just the syscall function. The syscall function still sets errno on failure, which is undesirable but for now it only affects cases where syscalls fail. [1] https://bugs.linaro.org/show_bug.cgi?id=5479 Signed-off-by: Siddhesh Poyarekar <siddhesh@gotplt.org> Reported-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Tested-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Reviewed-by: Tim Bird <tim.bird@sony.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-01-16selftests/livepatch: Remove unused local variable in set_ftrace_enabled()Miroslav Benes
set_ftrace_enabled() contains unused local variable "sysctl". Remove it. Signed-off-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-01-16selftests/livepatch: Replace set_dynamic_debug() with setup_config() in READMEMiroslav Benes
Commit 35c9e74cff4c ("selftests/livepatch: Make dynamic debug setup and restore generic") introduced setup_config() to set up the environment for each test. It superseded set_dynamic_debug(). README still mentions set_dynamic_debug(), so update it to setup_config() which should be used now in every test. Signed-off-by: Miroslav Benes <mbenes@suse.cz> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-01-15selftests/bpf: Add whitelist/blacklist of test names to test_progsAndrii Nakryiko
Add ability to specify a list of test name substrings for selecting which tests to run. So now -t is accepting a comma-separated list of strings, similarly to how -n accepts a comma-separated list of test numbers. Additionally, add ability to blacklist tests by name. Blacklist takes precedence over whitelist. Blacklisting is important for cases where it's known that some tests can't pass (e.g., due to perf hardware events that are not available within VM). This is going to be used for libbpf testing in Travis CI in its Github repo. Example runs with just whitelist and whitelist + blacklist: $ sudo ./test_progs -tattach,core/existence #1 attach_probe:OK #6 cgroup_attach_autodetach:OK #7 cgroup_attach_multi:OK #8 cgroup_attach_override:OK #9 core_extern:OK #10/44 existence:OK #10/45 existence___minimal:OK #10/46 existence__err_int_sz:OK #10/47 existence__err_int_type:OK #10/48 existence__err_int_kind:OK #10/49 existence__err_arr_kind:OK #10/50 existence__err_arr_value_type:OK #10/51 existence__err_struct_type:OK #10 core_reloc:OK #19 flow_dissector_reattach:OK #60 tp_attach_query:OK Summary: 8/8 PASSED, 0 SKIPPED, 0 FAILED $ sudo ./test_progs -tattach,core/existence -bcgroup,flow/arr #1 attach_probe:OK #9 core_extern:OK #10/44 existence:OK #10/45 existence___minimal:OK #10/46 existence__err_int_sz:OK #10/47 existence__err_int_type:OK #10/48 existence__err_int_kind:OK #10/51 existence__err_struct_type:OK #10 core_reloc:OK #60 tp_attach_query:OK Summary: 4/6 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Julia Kartseva <hex@fb.com> Link: https://lore.kernel.org/bpf/20200116005549.3644118-1-andriin@fb.com
2020-01-15selftests/bpf: Add batch ops testing to array bpf mapBrian Vazquez
Tested bpf_map_lookup_batch() and bpf_map_update_batch() functionality. $ ./test_maps ... test_array_map_batch_ops:PASS ... Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200115184308.162644-10-brianvv@google.com
2020-01-15selftests/bpf: Add batch ops testing for htab and htab_percpu mapYonghong Song
Tested bpf_map_lookup_batch(), bpf_map_lookup_and_delete_batch(), bpf_map_update_batch(), and bpf_map_delete_batch() functionality. $ ./test_maps ... test_htab_map_batch_ops:PASS test_htab_percpu_map_batch_ops:PASS ... Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200115184308.162644-9-brianvv@google.com
2020-01-15selftests/bpf: Add a test for attaching a bpf fentry/fexit trace to an XDP ↵Eelco Chaudron
program Add a test that will attach a FENTRY and FEXIT program to the XDP test program. It will also verify data from the XDP context on FENTRY and verifies the return code on exit. Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/157909410480.47481.11202505690938004673.stgit@xdp-tutorial
2020-01-15tools/bpf: Add self tests for bpf_send_signal_thread()Yonghong Song
The test_progs send_signal() is amended to test bpf_send_signal_thread() as well. $ ./test_progs -n 40 #40/1 send_signal_tracepoint:OK #40/2 send_signal_perf:OK #40/3 send_signal_nmi:OK #40/4 send_signal_tracepoint_thread:OK #40/5 send_signal_perf_thread:OK #40/6 send_signal_nmi_thread:OK #40 send_signal:OK Summary: 1/6 PASSED, 0 SKIPPED, 0 FAILED Also took this opportunity to rewrite the send_signal test using skeleton framework and array mmap to make code simpler and more readable. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200115035003.602425-1-yhs@fb.com
2020-01-15selftests: mlxsw: qos_mc_aware: Fix mausezahn invocationPetr Machata
Mausezahn does not recognize "own" as a keyword on source IP address. As a result, the MC stream is not running at all, and therefore no UC degradation can be observed even in principle. Fix the invocation, and tighten the test: due to the minimum shaper configured at the MC TCs, we always expect about 20% degradation. Fail the test if it is lower. Fixes: 573363a68f27 ("selftests: mlxsw: Add qos_lib.sh") Signed-off-by: Petr Machata <petrm@mellanox.com> Reported-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14selftests: mlxsw: Add test for FIB offload APIIdo Schimmel
The test reuses the common FIB offload tests in order to make sure that mlxsw correctly implements FIB offload. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14selftests: netdevsim: Add test for FIB offload APIIdo Schimmel
Test various aspects of the FIB offload API on top of the netdevsim implementation. Both good and bad flows are tested. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14selftests: forwarding: Add helpers and tests for FIB offloadIdo Schimmel
Implement a set of common helpers and tests for FIB offload that can be used by multiple drivers to check their FIB offload implementations. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-14selftests/bpf: Build runqslower from selftestsAndrii Nakryiko
Ensure runqslower tool is built as part of selftests to prevent it from bit rotting. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200113073143.1779940-7-andriin@fb.com
2020-01-14selftests/timens: Check for right timens offsets after fork and execAndrei Vagin
Output on success: 1..1 ok 1 exec # Pass 1 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 Output on failure: 1..1 not ok 1 36016 16 Bail out! Output with lack of permissions: 1..1 not ok 1 # SKIP need to run as root Output without support of time namespaces: 1..1 not ok 1 # SKIP Time namespaces are not supported Co-developed-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-35-dima@arista.com
2020-01-14selftests/timens: Add a simple perf test for clock_gettime()Andrei Vagin
Output on success: 1..4 ok 1 host: clock: monotonic cycles: 148323947 ok 2 host: clock: boottime cycles: 148577503 ok 3 ns: clock: monotonic cycles: 137659217 ok 4 ns: clock: boottime cycles: 137959154 # Pass 4 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 Output with lack of permissions: 1..4 ok 1 host: clock: monotonic cycles: 145671139 ok 2 host: clock: boottime cycles: 146958357 not ok 3 # SKIP need to run as root Output without support of time namespaces: 1..4 ok 1 host: clock: monotonic cycles: 145671139 ok 2 host: clock: boottime cycles: 146958357 not ok 3 # SKIP Time namespaces are not supported Co-developed-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-34-dima@arista.com
2020-01-14selftests/timens: Add timer offsets testAndrei Vagin
Check that timer_create() takes into account clock offsets. Output on success: 1..3 ok 1 clockid=7 ok 2 clockid=1 ok 3 clockid=9 # Pass 3 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 Output with lack of permissions: 1..3 not ok 1 # SKIP need to run as root Output without support of time namespaces: 1..3 not ok 1 # SKIP Time namespaces are not supported Co-developed-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-33-dima@arista.com
2020-01-14selftests/timens: Add procfs selftestDmitry Safonov
Check that /proc/uptime is correct inside a new time namespace. Output on success: 1..1 ok 1 Passed for /proc/uptime # Pass 1 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 Output with lack of permissions: 1..1 not ok 1 # SKIP need to run as root Output without support of time namespaces: 1..1 not ok 1 # SKIP Time namespaces are not supported Co-developed-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-32-dima@arista.com
2020-01-14selftests/timens: Add a test for clock_nanosleep()Andrei Vagin
Check that clock_nanosleep() takes into account clock offsets. Output on success: 1..4 ok 1 clockid: 1 abs:0 ok 2 clockid: 1 abs:1 ok 3 clockid: 9 abs:0 ok 4 clockid: 9 abs:1 Output with lack of permissions: 1..4 not ok 1 # SKIP need to run as root Output without support of time namespaces: 1..4 not ok 1 # SKIP Time namespaces are not supported Co-developed-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-31-dima@arista.com
2020-01-14selftests/timens: Add a test for timerfdAndrei Vagin
Check that timerfd_create() takes into account clock offsets. Output on success: 1..3 ok 1 clockid=7 ok 2 clockid=1 ok 3 clockid=9 # Pass 3 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 Output on failure: 1..3 not ok 1 clockid: 7 elapsed: 0 not ok 2 clockid: 1 elapsed: 0 not ok 3 clockid: 9 elapsed: 0 Bail out! Output with lack of permissions: 1..3 not ok 1 # SKIP need to run as root Output without support of time namespaces: 1..3 not ok 1 # SKIP Time namespaces are not supported Co-developed-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-30-dima@arista.com
2020-01-14selftests/timens: Add Time Namespace test for supported clocksDmitry Safonov
A test to check that all supported clocks work on host and inside a new time namespace. Use both ways to get time: through VDSO and by entering the kernel with implicit syscall. Introduce a new timens directory in selftests framework for the next timens tests. Output on success: 1..10 ok 1 Passed for CLOCK_BOOTTIME (syscall) ok 2 Passed for CLOCK_BOOTTIME (vdso) ok 3 Passed for CLOCK_BOOTTIME_ALARM (syscall) ok 4 Passed for CLOCK_BOOTTIME_ALARM (vdso) ok 5 Passed for CLOCK_MONOTONIC (syscall) ok 6 Passed for CLOCK_MONOTONIC (vdso) ok 7 Passed for CLOCK_MONOTONIC_COARSE (syscall) ok 8 Passed for CLOCK_MONOTONIC_COARSE (vdso) ok 9 Passed for CLOCK_MONOTONIC_RAW (syscall) ok 10 Passed for CLOCK_MONOTONIC_RAW (vdso) # Pass 10 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0 Output with lack of permissions: 1..10 not ok 1 # SKIP need to run as root Output without support of time namespaces: 1..10 not ok 1 # SKIP Time namespaces are not supported Co-developed-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20191112012724.250792-29-dima@arista.com
generated by cgit (git 2.34.1) at 2025-07-29 02:27:02 +0000