| Age | Commit message (Collapse) | Author |
|---|
|
Change the file permissions of tools/testing/fault-injection/failcmd.sh to
allow execution. This ensures the script can be run directly without
explicitly invoking a shell.
Link: https://lkml.kernel.org/r/20240729085215.3403417-1-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The failcmd.sh script in the fault-injection toolkit does not currently
validate whether the provided address is in hexadecimal format. This can
lead to silent failures if the address is sourced from places like
`/proc/kallsyms`, which omits the '0x' prefix, potentially causing users
to operate under incorrect assumptions.
Introduce a new function, `exit_if_not_hex`, which checks the format of
the provided address and exits with an error message if the address is not
a valid hexadecimal number.
This enhancement prevents users from running the command with improperly
formatted addresses, thus improving the robustness and usability of the
failcmd tool.
Link: https://lkml.kernel.org/r/20240729084512.3349928-1-leitao@debian.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Separate call to mas_destroy() from mas_nomem() so we can check for no
memory errors without destroying the current maple state in
mas_store_gfp(). We then add calls to mas_destroy() to callers of
mas_nomem().
Link: https://lkml.kernel.org/r/20240814161944.55347-6-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce mas_wr_store_type() which will set the correct store type based
on a walk of the tree. In mas_wr_node_store() the <= min_slots condition
is changed to < as if new_end is = to mt_min_slots then there is not
enough room.
mas_prealloc_calc() is also introduced to abstract the calculation used to
determine the number of nodes needed for a store operation.
In this change a call to mas_reset() is removed in the error case of
mas_prealloc(). This is only needed in the MA_STATE_REBALANCE case of
mas_destroy(). We can move the call to mas_reset() directly to
mas_destroy().
Also, add a test case to validate the order that we check the store type
in is correct. This test models a vma expanding and then shrinking which
is part of the boot process.
Link: https://lkml.kernel.org/r/20240814161944.55347-5-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add new callback fields to the userspace implementation of struct
kmem_cache. This allows for executing callback functions in order to
further test low memory scenarios where node allocation is retried.
This callback can help test race conditions by calling a function when a
low memory event is tested.
Link: https://lkml.kernel.org/r/20240812190543.71967-2-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Make accept_memory() and range_contains_unaccepted_memory() take 'start'
and 'size' arguments instead of 'start' and 'end'.
Remove accept_page(), replacing it with direct calls to accept_memory().
The accept_page() name is going to be used for a different function.
Link: https://lkml.kernel.org/r/20240809114854.3745464-6-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
the syscall remap accepts following:
mremap(src, size, size, MREMAP_MAYMOVE | MREMAP_DONTUNMAP, dst)
when the src is sealed, the call will fail with error code:
EPERM
Previously, the test uses hard-coded 0xdeaddead as dst, and it
will fail on the system with newer glibc installed.
This patch removes test's dependency on glibc for mremap(), also
fix the test and remove the hardcoded address.
Link: https://lkml.kernel.org/r/20240807212320.2831848-1-jeffxu@chromium.org
Fixes: 4926c7a52de7 ("selftest mm/mseal memory sealing")
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reported-by: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add an mseal test for madvise() operations that aren't considered
"discard" (e.g purely advisory ops such as MADV_RANDOM).
[pedro.falcato@gmail.com: adjust the mseal test's plan]
Link: https://lkml.kernel.org/r/20240807203724.2686144-1-pedro.falcato@gmail.com
Link: https://lkml.kernel.org/r/20240807173336.2523757-3-pedro.falcato@gmail.com
Signed-off-by: Pedro Falcato <pedro.falcato@gmail.com>
Tested-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Establish a new userland VMA unit testing implementation under
tools/testing which utilises existing logic providing maple tree support
in userland utilising the now-shared code previously exclusive to radix
tree testing.
This provides fundamental VMA operations whose API is defined in mm/vma.h,
while stubbing out superfluous functionality.
This exists as a proof-of-concept, with the test implementation functional
and sufficient to allow userland compilation of vma.c, but containing only
cursory tests to demonstrate basic functionality.
Link: https://lkml.kernel.org/r/533ffa2eec771cbe6b387dd049a7f128a53eb616.1722251717.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: SeongJae Park <sj@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Gow <davidgow@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kees Cook <kees@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rae Moar <rmoar@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The core components contained within the radix-tree tests which provide
shims for kernel headers and access to the maple tree are useful for
testing other things, so separate them out and make the radix tree tests
dependent on the shared components.
This lays the groundwork for us to add VMA tests of the newly introduced
vma.c file.
Link: https://lkml.kernel.org/r/1ee720c265808168e0d75608e687607d77c36719.1722251717.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Gow <davidgow@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kees Cook <kees@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rae Moar <rmoar@google.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Extend two existing tests to cover extracting memory usage through the
newly mutable memory.peak and memory.swap.peak handlers.
In particular, make sure to exercise adding and removing watchers with
overlapping lifetimes so the less-trivial logic gets tested.
The new/updated tests attempt to detect a lack of the write handler by
fstat'ing the memory.peak and memory.swap.peak files and skip the tests if
that's the case. Additionally, skip if the file doesn't exist at all.
[davidf@vimeo.com: update tests]
Link: https://lkml.kernel.org/r/20240730231304.761942-3-davidf@vimeo.com
Link: https://lkml.kernel.org/r/20240729143743.34236-3-davidf@vimeo.com
Signed-off-by: David Finkel <davidf@vimeo.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The __NR_mmap isn't found on armhf. The mmap() is commonly available
system call and its wrapper is present on all architectures. So it should
be used directly. It solves problem for armhf and doesn't create problem
for other architectures.
Remove sys_mmap() functions as they aren't doing anything else other than
calling mmap(). There is no need to set errno = 0 manually as glibc
always resets it.
For reference errors are as following:
CC seal_elf
seal_elf.c: In function 'sys_mmap':
seal_elf.c:39:33: error: '__NR_mmap' undeclared (first use in this function)
39 | sret = (void *) syscall(__NR_mmap, addr, len, prot,
| ^~~~~~~~~
mseal_test.c: In function 'sys_mmap':
mseal_test.c:90:33: error: '__NR_mmap' undeclared (first use in this function)
90 | sret = (void *) syscall(__NR_mmap, addr, len, prot,
| ^~~~~~~~~
Link: https://lkml.kernel.org/r/20240809082511.497266-1-usama.anjum@collabora.com
Fixes: 4926c7a52de7 ("selftest mm/mseal memory sealing")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is only hotplug test for cpuset v1, just add base read/write test
for cpuset v1.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Since isolated CPUs can be reserved at boot time via the "isolcpus"
boot command line option, these pre-isolated CPUs may interfere with
testing done by test_cpuset_prs.sh.
With the previous commit that incorporates those boot time isolated CPUs
into "cpuset.cpus.isolated", we can check for those before testing is
started to make sure that there will be no interference. Otherwise,
this test will be skipped if incorrect test failure can happen.
As "cpuset.cpus.isolated" is now available in a non cgroup_debug kernel,
we don't need to check for its existence anymore.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
%.bpf.o objects depend on vmlinux.h, which makes them transitively
dependent on unnecessary libbpf headers. However vmlinux.h doesn't
actually change as often.
When generating vmlinux.h, compare it to a previous version and update
it only if there are changes.
Example of build time improvement (after first clean build):
$ touch ../../../lib/bpf/bpf.h
$ time make -j8
Before: real 1m37.592s
After: real 0m27.310s
Notice that %.bpf.o gen step is skipped if vmlinux.h hasn't changed.
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4BzY1z5cC7BKye8=A8aTVxpsCzD=p1jdTfKC7i0XVuYoHUQ@mail.gmail.com
Link: https://lore.kernel.org/bpf/20240828174608.377204-2-ihor.solodrai@pm.me
|
|
Test %.bpf.o objects actually depend only on some libbpf headers.
Define a list of required headers and use it as TRUNNER_BPF_OBJS
dependency.
bpf_*.h list was determined by:
$ grep -rh 'include <bpf/bpf_' progs | sort -u
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link:
Link: https://lore.kernel.org/bpf/20240828174608.377204-1-ihor.solodrai@pm.me
https://lore.kernel.org/bpf/CAEf4BzYQ-j2i_xjs94Nn=8+FVfkWt51mLZyiYKiz9oA4Z=pCeA@mail.gmail.com/
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
* tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer
iommu: Do not return 0 from map_pages if it doesn't do anything
iommufd: Do not allow creating areas without READ or WRITE
iommu/vt-d: Fix incorrect domain ID in context flush helper
iommu: Handle iommu faults for a bad iopf setup
|
|
Create a BTF with endianness different from host, make a distilled
base/split BTF pair from it, dump as raw bytes, import again and
verify that endianness is preserved.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240830173406.1581007-1-eddyz87@gmail.com
|
|
When building with clang, there's this warning:
vdso_test_getrandom.c:145:40: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
145 | static void *test_vdso_getrandom(void *)
| ^
vdso_test_getrandom.c:155:40: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
155 | static void *test_libc_getrandom(void *)
| ^
vdso_test_getrandom.c:165:43: warning: omitting the parameter name in a function definition is a C23 extension [-Wc23-extensions]
165 | static void *test_syscall_getrandom(void *)
Add the named ctx parameter to quash it.
Reported-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
A "%s" is missing in ksft_exit_fail_msg(); instead, use the newly
introduced ksft_exit_fail_perror().
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240830052911.4040970-1-dev.jain@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Don't duplicate parse_vdso function prototypes, include
the header instead.
Fixes: 693f5ca08ca0 ("kselftest: Extend vDSO selftest")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
vdso_test_correctness test fails on powerpc:
~ # ./vdso_test_correctness
...
[RUN] Testing clock_gettime for clock CLOCK_REALTIME_ALARM (8)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock CLOCK_BOOTTIME_ALARM (9)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock CLOCK_SGI_CYCLE (10)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
...
[RUN] Testing clock_gettime for clock invalid (-1)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock invalid (-2147483648)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock invalid (2147483647)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
On powerpc, a call to a VDSO function is not an ordinary C function
call. Unlike several architectures which returns a negative error code
in case of an error, powerpc sets CR[SO] and returns the error code
as a positive value.
Define and use a macro called VDSO_CALL() which takes a pointer
to the function to call, the number of arguments and the arguments.
Also update ABI vdso documentation to reflect this subtlety.
Provide a specific version of VDSO_CALL() for powerpc that negates
the error code on return when CR[SO] is set.
Fixes: c7e5789b24d3 ("kselftest: Move test_vdso to the vDSO test suite")
Fixes: 2e9a97256616 ("selftests: vdso: Add a selftest for vDSO getcpu()")
Fixes: 693f5ca08ca0 ("kselftest: Extend vDSO selftest")
Fixes: b2f1c3db2887 ("kselftest: Extend vdso correctness test to clock_gettime64")
Fixes: 4920a2590e91 ("selftests/vDSO: add tests for vgetrandom")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
On powerpc64, following tests fail locating vDSO functions:
~ # ./vdso_test_abi
TAP version 13
1..16
# [vDSO kselftest] VDSO_VERSION: LINUX_2.6.15
# Couldn't find __kernel_gettimeofday
ok 1 # SKIP __kernel_gettimeofday
# clock_id: CLOCK_REALTIME
# Couldn't find __kernel_clock_gettime
ok 2 # SKIP __kernel_clock_gettime CLOCK_REALTIME
# Couldn't find __kernel_clock_getres
ok 3 # SKIP __kernel_clock_getres CLOCK_REALTIME
...
# Couldn't find __kernel_time
ok 16 # SKIP __kernel_time
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:16 error:0
~ # ./vdso_test_getrandom
__kernel_getrandom is missing!
~ # ./vdso_test_gettimeofday
Could not find __kernel_gettimeofday
~ # ./vdso_test_getcpu
Could not find __kernel_getcpu
On powerpc64, as shown below by readelf, vDSO functions symbols have
type NOTYPE, so also accept that type when looking for symbols.
$ powerpc64-linux-gnu-readelf -a arch/powerpc/kernel/vdso/vdso64.so.dbg
ELF Header:
Magic: 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00
Class: ELF64
Data: 2's complement, big endian
Version: 1 (current)
OS/ABI: UNIX - System V
ABI Version: 0
Type: DYN (Shared object file)
Machine: PowerPC64
Version: 0x1
...
Symbol table '.dynsym' contains 12 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
2: 00000000000005f0 36 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
3: 0000000000000578 68 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
4: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15
5: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
6: 0000000000000614 172 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
7: 00000000000006f0 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
8: 000000000000047c 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
9: 0000000000000454 12 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
10: 00000000000004d0 84 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
11: 00000000000005bc 52 NOTYPE GLOBAL DEFAULT 8 __[...]@@LINUX_2.6.15
Symbol table '.symtab' contains 56 entries:
Num: Value Size Type Bind Vis Ndx Name
...
45: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LINUX_2.6.15
46: 00000000000006c0 48 NOTYPE GLOBAL DEFAULT 8 __kernel_getcpu
47: 0000000000000524 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_getres
48: 00000000000005f0 36 NOTYPE GLOBAL DEFAULT 8 __kernel_get_tbfreq
49: 000000000000047c 84 NOTYPE GLOBAL DEFAULT 8 __kernel_gettimeofday
50: 0000000000000614 172 NOTYPE GLOBAL DEFAULT 8 __kernel_sync_dicache
51: 00000000000006f0 84 NOTYPE GLOBAL DEFAULT 8 __kernel_getrandom
52: 0000000000000454 12 NOTYPE GLOBAL DEFAULT 8 __kernel_sigtram[...]
53: 0000000000000578 68 NOTYPE GLOBAL DEFAULT 8 __kernel_time
54: 00000000000004d0 84 NOTYPE GLOBAL DEFAULT 8 __kernel_clock_g[...]
55: 00000000000005bc 52 NOTYPE GLOBAL DEFAULT 8 __kernel_get_sys[...]
Fixes: 98eedc3a9dbf ("Document the vDSO and add a reference parser")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Running vdso_test_correctness on powerpc64 gives the following warning:
~ # ./vdso_test_correctness
Warning: failed to find clock_gettime64 in vDSO
This is because vdso_test_correctness was built with VDSO_32BIT defined.
__powerpc__ macro is defined on both powerpc32 and powerpc64 so
__powerpc64__ needs to be checked first in vdso_config.h
Fixes: 693f5ca08ca0 ("kselftest: Extend vDSO selftest")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Following error occurs when running vdso_test_correctness on powerpc:
~ # ./vdso_test_correctness
[WARN] failed to find vDSO
[SKIP] No vDSO, so skipping clock_gettime() tests
[SKIP] No vDSO, so skipping clock_gettime64() tests
[RUN] Testing getcpu...
[OK] CPU 0: syscall: cpu 0, node 0
On powerpc, vDSO is neither called linux-vdso.so.1 nor linux-gate.so.1
but linux-vdso32.so.1 or linux-vdso64.so.1.
Also search those two names before giving up.
Fixes: c7e5789b24d3 ("kselftest: Move test_vdso to the vDSO test suite")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
If the getrandom test compiles for an arch, don't exit fatally if the
actual cpu it's running on is unsupported.
Suggested-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Building test_vdso_getrandom currently leads to following issue:
In file included from /home/xry111/git-repos/linux/tools/include/linux/compiler_types.h:36,
from /home/xry111/git-repos/linux/include/uapi/linux/stddef.h:5,
from /home/xry111/git-repos/linux/include/uapi/linux/posix_types.h:5,
from /usr/include/asm/sigcontext.h:12,
from /usr/include/bits/sigcontext.h:30,
from /usr/include/signal.h:301,
from vdso_test_getrandom.c:14:
/home/xry111/git-repos/linux/tools/include/linux/compiler-gcc.h:3:2: error: #error "Please don't include <linux/compiler-gcc.h> directly, include <linux/compiler.h> instead."
3 | #error "Please don't include <linux/compiler-gcc.h> directly, include <linux/compiler.h> instead."
| ^~~~~
It's because the compiler_types.h inclusion in
include/uapi/linux/stddef.h is expected to be removed by the
header_install.sh script, as compiler_types.h shouldn't be used from
user space.
Add KHDR_INCLUDES before the existing include/uapi inclusion so that
usr/include takes precedence if it's populated.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
CONFIG_FUNCTION_ALIGNMENT=0 is no longer necessary and BULID_VDSO wasn't
spelled right while BUILD_VDSO isn't necessary, so just remove these.
Reported-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
On systems that set -Wl,--as-needed, putting the -lsodium in the wrong
place on the command line means we get a linker error:
CC vdso_test_chacha
/usr/bin/ld: /tmp/ccKpjnSM.o: in function `main':
vdso_test_chacha.c:(.text+0x276): undefined reference to `crypto_stream_chacha20'
collect2: error: ld returned 1 exit status
Fix this by passing pkg-config's --libs output to the LDFLAGS field
instead of the CFLAGS field, as is customary.
Reported-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
When libsodium is installed into its own prefix, the --cflags output is
needed for the compiler to find libsodium headers.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Don't hard-code x86 specific names. Rather, use vdso_config definitions
to find the correct function matching the architecture.
Add random VDSO function names in names[][]. Remove the #ifdef
CONFIG_VDSO32, as having the name there all the time is harmless and
guaranties a steady index for following strings.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[Jason: add [6] to variable declaration rather than each usage site.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Building test_vdso_chacha currently leads to following issue:
In file included from /home/chleroy/linux-powerpc/include/linux/limits.h:7,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/local_lim.h:38,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/posix1_lim.h:161,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/limits.h:195,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/lib/gcc/powerpc64-buildroot-linux-gnu/12.3.0/include-fixed/limits.h:203,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/lib/gcc/powerpc64-buildroot-linux-gnu/12.3.0/include-fixed/syslimits.h:7,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/lib/gcc/powerpc64-buildroot-linux-gnu/12.3.0/include-fixed/limits.h:34,
from /tmp/sodium/usr/local/include/sodium/export.h:7,
from /tmp/sodium/usr/local/include/sodium/crypto_stream_chacha20.h:14,
from vdso_test_chacha.c:6:
/opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/xopen_lim.h:99:6: error: missing binary operator before token "("
99 | # if INT_MAX == 32767
| ^~~~~~~
/opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/xopen_lim.h:102:7: error: missing binary operator before token "("
102 | # if INT_MAX == 2147483647
| ^~~~~~~
/opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/xopen_lim.h:126:6: error: missing binary operator before token "("
126 | # if LONG_MAX == 2147483647
| ^~~~~~~~
This is due to kernel include/linux/limits.h being included instead of
libc's limits.h.
This is because directory include/ is added through option -isystem so
it goes prior to glibc's include directory.
Replace -isystem by -idirafter.
But this implies that now tools/include/linux/linkage.h is included
instead of include/linux/linkage.h, so define a stub for
SYM_FUNC_START() and SYM_FUNC_END().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Architectures use different location for vDSO sources:
arch/mips/vdso
arch/sparc/vdso
arch/arm64/kernel/vdso
arch/riscv/kernel/vdso
arch/csky/kernel/vdso
arch/x86/um/vdso
arch/x86/entry/vdso
arch/powerpc/kernel/vdso
arch/arm/vdso
arch/loongarch/vdso
Don't hard-code vdso sources location in selftest Makefile. Instead
create a vdso/ symbolic link in tools/arch/$arch/ and update Makefile
accordingly.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than using pthread_get/set_specific, just use gcc's __thread
annotation, which is noticeably faster and makes the code more obvious.
Also, just have one simplified struct called vgrnd, instead of trying to
split things up semantically. Those divisions were useful when this code
was split across several commit *messages*, but doesn't make as much
sense within a single file. This should make the code more clear and
provide a better example for implementers.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The test case for SME vector length changes via sigreturn use a bit too
much cut'n'paste and only actually changed the SVE vector length in the
test itself. Andre's recent factoring out of the initialisation code caused
this to be exposed and the test to start failing. Fix the test to actually
cover the thing it's supposed to test.
Fixes: 4963aeb35a9e ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240829-arm64-sme-signal-vl-change-test-v1-1-42d7534cb818@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add a new arch_timer_edge_cases selftests that validates:
* timers above the max TVAL value
* timers in the past
* moving counters ahead and behind pending timers
* reprograming timers
* timers fired multiple times
* masking/unmasking using the timer control mask
These are intentionally unusual scenarios to stress compliance with
the arm architecture.
Co-developed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Link: https://lore.kernel.org/r/20240823175836.2798235-3-coltonlewis@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Break up the asm instructions poking daifclr and daifset to handle
interrupts. R_RBZYL specifies pending interrupts will be handle after
context synchronization events such as an ISB.
Introduce a function wrapper for the WFI instruction.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Link: https://lore.kernel.org/r/20240823175836.2798235-2-coltonlewis@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add KVM selftests' one-off assets, e.g. the Makefile, to the .gitignore so
that they are explicitly included. The justification for omitting the
one-offs was that including them wouldn't help prevent mistakes:
Deliberately do not include the one-off assets, e.g. config, settings,
.gitignore itself, etc as Git doesn't ignore files that are already in
the repository. Adding the one-off assets won't prevent mistakes where
developers forget to --force add files that don't match the "allowed".
Turns out that's not the case, as W=1 will generate warnings, and the
amazing-as-always kernel test bot reports new warnings:
tools/testing/selftests/kvm/.gitignore: warning: ignored by one of the .gitignore files
tools/testing/selftests/kvm/Makefile: warning: ignored by one of the .gitignore files
>> tools/testing/selftests/kvm/Makefile.kvm: warning: ignored by one of the .gitignore files
tools/testing/selftests/kvm/config: warning: ignored by one of the .gitignore files
tools/testing/selftests/kvm/settings: warning: ignored by one of the .gitignore files
Fixes: 43e96957e8b8 ("KVM: selftests: Use pattern matching in .gitignore")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408211818.85zIkDEK-lkp@intel.com
Link: https://lore.kernel.org/r/20240828215800.737042-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a test to verify that KVM correctly exits (or not) when a vCPU's
coalesced I/O ring is full (or isn't). Iterate over all legal starting
points in the ring (with an empty ring), and verify that KVM doesn't exit
until the ring is full.
Opportunistically verify that KVM exits immediately on non-coalesced I/O,
either because the MMIO/PIO region was never registered, or because a
previous region was unregistered.
This is a regression test for a KVM bug where KVM would prematurely exit
due to bad math resulting in a false positive if the first entry in the
ring was before the halfway mark. See commit 92f6d4130497 ("KVM: Fix
coalesced_mmio_has_room() to avoid premature userspace exit").
Enable the test for x86, arm64, and risc-v, i.e. all architectures except
s390, which doesn't have MMIO.
On x86, which has both MMIO and PIO, interleave MMIO and PIO into the same
ring, as KVM shouldn't exit until a non-coalesced I/O is encountered,
regardless of whether the ring is filled with MMIO, PIO, or both.
Lastly, wrap the coalesced I/O ring in a structure to prepare for a
potential future where KVM supports multiple ring buffers beyond KVM's
"default" built-in buffer.
Link: https://lore.kernel.org/all/20240820133333.1724191-1-ilstam@amazon.com
Cc: Ilias Stamatis <ilstam@amazon.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240828181446.652474-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Regression test for ae20eef5 ("KVM: SVM: Update SEV-ES shutdown intercepts
with more metadata"). Test confirms userspace is correctly indicated of
a guest shutdown not previous behavior of an EINVAL from KVM_RUN.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Alper Gun <alpergun@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: kvm@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Peter Gonda <pgonda@google.com>
Tested-by: Pratik R. Sampat <pratikrajesh.sampat@amd.com>
Link: https://lore.kernel.org/r/20240709182936.146487-1-pgonda@google.com
[sean: clobber IDT to ensure #UD leads to SHUTDOWN]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Unlink memory regions when freeing a VM, even though it's not strictly
necessary since all tracking structures are freed soon after. The time
spent deleting entries is negligible, and not unlinking entries is
confusing, e.g. it's easy to overlook that the tree structures are
freed by the caller.
Link: https://lore.kernel.org/r/20240802201429.338412-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Remove sefltests' kvm_memcmp_hva_gva(), which has literally never had a
single user since it was introduced by commit 783e9e51266eb ("kvm:
selftests: add API testing infrastructure").
Link: https://lore.kernel.org/r/20240802200853.336512-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
This patch adds test cases for iter next method returning valid
pointer, which can also used as usage examples.
Currently iter next method should return valid pointer.
iter_next_trusted is the correct usage and test if iter next method
return valid pointer. bpf_iter_task_vma_next has KF_RET_NULL flag,
so the returned pointer may be NULL. We need to check if the pointer
is NULL before using it.
iter_next_trusted_or_null is the incorrect usage. There is no checking
before using the pointer, so it will be rejected by the verifier.
iter_next_rcu and iter_next_rcu_or_null are similar test cases for
KF_RCU_PROTECTED iterators.
iter_next_rcu_not_trusted is used to test that the pointer returned by
iter next method of KF_RCU_PROTECTED iterator cannot be passed in
KF_TRUSTED_ARGS kfuncs.
iter_next_ptr_mem_not_trusted is used to test that base type
PTR_TO_MEM should not be combined with type flag PTR_TRUSTED.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB5848709758F6922F02AF9F1F99962@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch tests the epilogue patching when the main prog has
multiple BPF_EXIT. The verifier should have patched the 2nd (and
later) BPF_EXIT with a BPF_JA that goes back to the earlier
patched epilogue instructions.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-10-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds a pro/epilogue test when the main prog has a goto insn
that goes back to the very first instruction of the prog. It is
to test the correctness of the adjust_jmp_off(prog, 0, delta)
after the verifier has applied the prologue and/or epilogue patch.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-9-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds a gen_epilogue test to test a main prog
using a bpf_tail_call.
A non test_loader test is used. The tailcall target program,
"test_epilogue_subprog", needs to be used in a struct_ops map
before it can be loaded. Another struct_ops map is also needed
to host the actual "test_epilogue_tailcall" struct_ops program
that does the bpf_tail_call. The earlier test_loader patch
will attach all struct_ops maps but the bpf_testmod.c does
not support >1 attached struct_ops.
The earlier patch used the test_loader which has already covered
checking for the patched pro/epilogue instructions. This is done
by the __xlated tag.
This patch goes for the regular skel load and syscall test to do
the tailcall test that can also allow to directly pass the
the "struct st_ops_args *args" as ctx_in to the
SEC("syscall") program.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-8-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This test adds a new struct_ops "bpf_testmod_st_ops" in bpf_testmod.
The ops of the bpf_testmod_st_ops is triggered by new kfunc calls
"bpf_kfunc_st_ops_test_*logue". These new kfunc calls are
primarily used by the SEC("syscall") program. The test triggering
sequence is like:
SEC("syscall")
syscall_prologue(struct st_ops_args *args)
bpf_kfunc_st_op_test_prologue(args)
st_ops->test_prologue(args)
.gen_prologue adds 1000 to args->a
.gen_epilogue adds 10000 to args->a
.gen_epilogue will also set the r0 to 2 * args->a.
The .gen_prologue and .gen_epilogue of the bpf_testmod_st_ops
will test the prog->aux->attach_func_name to decide if
it needs to generate codes.
The main programs of the pro_epilogue.c will call a
new kfunc bpf_kfunc_st_ops_inc10 which does "args->a += 10".
It will also call a subprog() which does "args->a += 1".
This patch uses the test_loader infra to check the __xlated
instructions patched after gen_prologue and/or gen_epilogue.
The __xlated check is based on Eduard's example (Thanks!) in v1.
args->a is returned by the struct_ops prog (either the main prog
or the epilogue). Thus, the __retval of the SEC("syscall") prog
is checked. For example, when triggering the ops in the
'SEC("struct_ops/test_epilogue") int test_epilogue'
The expected args->a is +1 (subprog call) + 10 (kfunc call)
+ 10000 (.gen_epilogue) = 10011.
The expected return value is 2 * 10011 (.gen_epilogue).
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-7-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In test_loader based tests to bpf_map__attach_struct_ops()
before call to bpf_prog_test_run_opts() in order to trigger
bpf_struct_ops->reg() callbacks on kernel side.
This allows to use __retval macro for struct_ops tests.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240829210833.388152-6-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When AVIC, and thus IPI virtualization on AMD, is enabled, the CPU will
virtualize ICR writes. Unfortunately, the CPU doesn't do a very good job,
as it fails to clear the BUSY bit and also allows writing ICR2[23:0],
despite them being "RESERVED MBZ". Account for the quirky behavior in
the xapic_state test to avoid failures in a configuration that likely has
no hope of ever being enabled in production.
Link: https://lore.kernel.org/r/20240719235107.3023592-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that the BUSY bit mess is gone (for x2APIC), verify that the *guest*
can read back the ICR value that it wrote. Due to the divergent
behavior between AMD and Intel with respect to the backing storage of the
ICR in the vAPIC page, emulating a seemingly simple MSR write is quite
complex.
Link: https://lore.kernel.org/r/20240719235107.3023592-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
