| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless and netfilter
Current release - regressions:
- udp: fall back to software USO if IPv6 extension headers are
present
- wifi: iwlwifi: correctly lookup DMA address in SG table
Current release - new code bugs:
- eth: mlx5e: fix queue stats access to non-existing channels splat
Previous releases - regressions:
- eth: mlx5e: take state lock during tx timeout reporter
- eth: mlxbf_gige: disable RX filters until RX path initialized
- eth: igc: fix reset adapter logics when tx mode change
Previous releases - always broken:
- tcp: update window clamping condition
- netfilter:
- nf_queue: drop packets with cloned unconfirmed conntracks
- nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
- vsock: fix recursive ->recvmsg calls
- dsa: vsc73xx: fix MDIO bus access and PHY opera
- eth: gtp: pull network headers in gtp_dev_xmit()
- eth: igc: fix packet still tx after gate close by reducing i226 MAC
retry buffer
- eth: mana: fix RX buf alloc_size alignment and atomic op panic
- eth: hns3: fix a deadlock problem when config TC during resetting"
* tag 'net-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net: hns3: use correct release function during uninitialization
net: hns3: void array out of bound when loop tnl_num
net: hns3: fix a deadlock problem when config TC during resetting
net: hns3: use the user's cfg after reset
net: hns3: fix wrong use of semaphore up
selftests: net: lib: kill PIDs before del netns
pse-core: Conditionally set current limit during PI regulator registration
net: thunder_bgx: Fix netdev structure allocation
net: ethtool: Allow write mechanism of LPL and both LPL and EPL
vsock: fix recursive ->recvmsg calls
selftest: af_unix: Fix kselftest compilation warnings
netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
netfilter: nf_tables: Introduce nf_tables_getobj_single
netfilter: nf_tables: Audit log dump reset after the fact
selftests: netfilter: add test for br_netfilter+conntrack+queue combination
netfilter: nf_queue: drop packets with cloned unconfirmed conntracks
netfilter: flowtable: initialise extack before use
netfilter: nfnetlink: Initialise extack before use in ACKs
netfilter: allow ipv6 fragments to arrive on different devices
tcp: Update window clamping condition
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Ignores ifindex for types other than mcast/linklocal in ipv6 frag
reasm, from Tom Hughes.
2) Initialize extack for begin/end netlink message marker in batch,
from Donald Hunter.
3) Initialize extack for flowtable offload support, also from Donald.
4) Dropped packets with cloned unconfirmed conntracks in nfqueue,
later it should be possible to explore lookup after reinject but
Florian prefers this approach at this stage. From Florian Westphal.
5) Add selftest for cloned unconfirmed conntracks in nfqueue for
previous update.
6) Audit after filling netlink header successfully in object dump,
from Phil Sutter.
7-8) Fix concurrent dump and reset which could result in underflow
counter / quota objects.
netfilter pull request 24-08-15
* tag 'nf-24-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
netfilter: nf_tables: Introduce nf_tables_getobj_single
netfilter: nf_tables: Audit log dump reset after the fact
selftests: netfilter: add test for br_netfilter+conntrack+queue combination
netfilter: nf_queue: drop packets with cloned unconfirmed conntracks
netfilter: flowtable: initialise extack before use
netfilter: nfnetlink: Initialise extack before use in ACKs
netfilter: allow ipv6 fragments to arrive on different devices
====================
Link: https://patch.msgid.link/20240814222042.150590-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When deleting netns, it is possible to still have some tasks running,
e.g. background tasks like tcpdump running in the background, not
stopped because the test has been interrupted.
Before deleting the netns, it is then safer to kill all attached PIDs,
if any. That should reduce some noises after the end of some tests, and
help with the debugging of some issues. That's why this modification is
seen as a "fix".
Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240813-upstream-net-20240813-selftests-net-lib-kill-v1-1-27b689b248b8@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Change expected_buf from (const void *) to (const char *)
in function __recvpair().
This change fixes the below warnings during test compilation:
```
In file included from msg_oob.c:14:
msg_oob.c: In function ‘__recvpair’:
../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument
of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=]
../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’
msg_oob.c:235:17: note: in expansion of macro ‘TH_LOG’
../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument
of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=]
../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’
msg_oob.c:259:25: note: in expansion of macro ‘TH_LOG’
```
Fixes: d098d77232c3 ("selftest: af_unix: Add msg_oob.c.")
Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240814080743.1156166-1-jain.abhinav177@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
test_skb_cgroup_id_user allows testing skb cgroup id retrieval at different
levels, but is not integrated in test_progs, so it is not run
automatically in CI. The test overlaps a bit with
cgroup_skb_sk_lookup_kern, which is integrated in test_progs and test
extensively skb cgroup helpers, but there is still one major difference
between the two tests which justifies the conversion:
cgroup_skb_sk_lookup_kern deals with a BPF_PROG_TYPE_CGROUP_SKB (attached
on a cgroup), while test_skb_cgroup_id_user deals with a
BPF_PROG_TYPE_SCHED_CLS (attached on a qdisc)
Convert test_skb_cgroup_id_user into test_progs framework in order to run
it automatically in CI. The main differences with the original test are the
following:
- rename the test to make it shorter and more straightforward regarding
tested feature
- the wrapping shell script has been dropped since every setup step is now
handled in the main C test file
- the test has been renamed for a shorter name and reflecting the tested
API
- add dedicated assert log per level to ease test failure debugging
- use global variables instead of maps to access bpf prog data
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-4-a33c03458cf6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
test_skb_cgroup_id_kern.c is currently involved in a manual test. In its
current form, it can not be used with the auto-generated skeleton APIs,
because the section name is not valid to allow libbpf to deduce the program
type.
Update section name to allow skeleton APIs usage. Also rename the program
name to make it shorter and more straighforward regarding the API it is
testing. While doing so, make sure that test_skb_cgroup_id.sh passes to get
a working reference before converting it to test_progs
- update the obj name
- fix loading issue (verifier rejecting the program when loaded through tc,
because of map not found), by preloading the whole obj with bpftool
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-3-a33c03458cf6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
test_cgroup_storage is currently a standalone program which is not run
when executing test_progs.
Convert it to the test_progs framework so it can be automatically executed
in CI. The conversion led to the following changes:
- converted the raw bpf program in the userspace test file into a dedicated
test program in progs/ dir
- reduced the scope of cgroup_storage test: the content from this test
overlaps with some other tests already present in test_progs, most
notably netcnt and cgroup_storage_multi*. Those tests already check
extensively local storage, per-cpu local storage, cgroups interaction,
etc. So the new test only keep the part testing that the program return
code (based on map content) properly leads to packet being passed or
dropped.
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-2-a33c03458cf6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
get_current_cgroup_id_user allows testing for bpf_get_current_cgroup_id()
bpf API but is not integrated into test_progs, and so is not tested
automatically in CI.
Convert it to the test_progs framework to allow running it automatically.
The most notable differences with the old test are the following:
- the new test relies on autoattach instead of manually hooking/enabling
the targeted tracepoint through perf_event, which reduces quite a lot the
test code size
- it also accesses bpf prog data through global variables instead of maps
- sleep duration passed to nanosleep syscall has been reduced to its
minimum to not impact overall CI duration (we only care about the syscall
being properly triggered, not about the passed duration)
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20240813-convert_cgroup_tests-v4-1-a33c03458cf6@bootlin.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Trigger cloned skbs leaving softirq protection.
This triggers splat without the preceeding change
("netfilter: nf_queue: drop packets with cloned unconfirmed
conntracks"):
WARNING: at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm..
because local delivery and forwarding will race for confirmation.
Based on a reproducer script from Yi Chen.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"s390:
- Fix failure to start guests with kvm.use_gisa=0
- Panic if (un)share fails to maintain security.
ARM:
- Use kvfree() for the kvmalloc'd nested MMUs array
- Set of fixes to address warnings in W=1 builds
- Make KVM depend on assembler support for ARMv8.4
- Fix for vgic-debug interface for VMs without LPIs
- Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest
- Minor code / comment cleanups for configuring PAuth traps
- Take kvm->arch.config_lock to prevent destruction / initialization
race for a vCPU's CPUIF which may lead to a UAF
x86:
- Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)
- Fix smatch issues
- Small cleanups
- Make x2APIC ID 100% readonly
- Fix typo in uapi constant
Generic:
- Use synchronize_srcu_expedited() on irqfd shutdown"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: SEV: uapi: fix typo in SEV_RET_INVALID_CONFIG
KVM: x86: Disallow read-only memslots for SEV-ES and SEV-SNP (and TDX)
KVM: eventfd: Use synchronize_srcu_expedited() on shutdown
KVM: selftests: Add a testcase to verify x2APIC is fully readonly
KVM: x86: Make x2APIC ID 100% readonly
KVM: x86: Use this_cpu_ptr() instead of per_cpu_ptr(smp_processor_id())
KVM: x86: hyper-v: Remove unused inline function kvm_hv_free_pa_page()
KVM: SVM: Fix an error code in sev_gmem_post_populate()
KVM: SVM: Fix uninitialized variable bug
KVM: arm64: vgic: Hold config_lock while tearing down a CPU interface
KVM: selftests: arm64: Correct feature test for S1PIE in get-reg-list
KVM: arm64: Tidying up PAuth code in KVM
KVM: arm64: vgic-debug: Exit the iterator properly w/o LPI
KVM: arm64: Enforce dependency on an ARMv8.4-aware toolchain
s390/uv: Panic for set and remove shared access UVC errors
KVM: s390: fix validity interception issue when gisa is switched off
docs: KVM: Fix register ID of SPSR_FIQ
KVM: arm64: vgic: fix unexpected unlock sparse warnings
KVM: arm64: fix kdoc warnings in W=1 builds
KVM: arm64: fix override-init warnings in W=1 builds
...
|
|
Add a new user option to memslot_perf_test to allow testing memslot move
with quirk KVM_X86_QUIRK_SLOT_ZAP_ALL disabled.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20240703021219.13939-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a new user option to memslot_modification_stress_test to allow testing
with slot zap quirk KVM_X86_QUIRK_SLOT_ZAP_ALL disabled.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20240703021206.13923-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Update set_memory_region_test to make sure memslot move and deletion
function correctly both when slot zap quirk KVM_X86_QUIRK_SLOT_ZAP_ALL is
enabled and disabled.
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Message-ID: <20240703021119.13904-1-yan.y.zhao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kprobe_args_{char,string}.tc are using available_filter_functions file
which is provided by function tracer. Thus if function tracer is disabled,
these tests are failed on recent kernels because tracefs_create_dir is
not raised events by adding a dynamic event.
Add available_filter_functions to requires line.
Fixes: 7c1130ea5cae ("test: ftrace: Fix kprobe test for eventfs")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This commit adds a TINY scenario in order to support tests of Tiny RCU
and Tiny SRCU.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
Some servers have limitations on the number of CPUs a given guest OS
can use. In my earlier experience, such limitations have been at least
half of the host's CPUs, but in a recent example, this limit is less
than 40%. This commit therefore adds a --guest-cpu-limit argument that
allows such low limits to be made known to torture.sh.
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
|
|
On little-endian systems, doing subtraction after htons()
leads to interesting results:
Given:
MAGIC_BYTES = 123 = 0x007B aka. in big endian: 0x7B00 = 31488
sizeof(struct iphdr) = 20
Before this patch:
__bpf_constant_htons(MAGIC_BYTES) - sizeof(struct iphdr) = 0x7AEC
0x7AEC = htons(0xEC7A) = htons(60538)
So these were outer IP packets with a total length of 123 bytes,
containing an inner IP packet with a total length of 60538 bytes.
After this patch:
__bpf_constant_htons(MAGIC_BYTES - sizeof(struct iphdr)) = htons(103)
Now these packets are outer IP packets with a total length of 123 bytes,
containing an inner IP packet with a total length of 103 bytes.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Link: https://lore.kernel.org/r/20240808075906.1849564-1-ast@fiberby.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add a test to verify that userspace can't change a vCPU's x2APIC ID by
abusing KVM_SET_LAPIC. KVM models the x2APIC ID (and x2APIC LDR) as
readonly, and silently ignores userspace attempts to change the x2APIC ID
for backwards compatibility.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
[sean: write changelog, add to existing test]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240802202941.344889-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.11, round #1
- Use kvfree() for the kvmalloc'd nested MMUs array
- Set of fixes to address warnings in W=1 builds
- Make KVM depend on assembler support for ARMv8.4
- Fix for vgic-debug interface for VMs without LPIs
- Actually check ID_AA64MMFR3_EL1.S1PIE in get-reg-list selftest
- Minor code / comment cleanups for configuring PAuth traps
- Take kvm->arch.config_lock to prevent destruction / initialization
race for a vCPU's CPUIF which may lead to a UAF
|
|
A selftest is added such that without the previous patch,
a crash can happen. With the previous patch, the test can
run successfully. The new test is written in a way which
mimics original crash case:
main_prog
static_prog_1
static_prog_2
where static_prog_1 has different paths to static_prog_2
and some path has stack allocated and some other path
does not. A stacksafe() checking in static_prog_2()
triggered the crash.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240812214852.214037-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add tests that attempt to create NH groups that use full 16 bits of NH
weight.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/101cdd3f2bfd9511c9bec95f909d20ff56f70ba5.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests that exercise full 16 bits of NH weight.
Like in the previous patch, omit the 255:65535 test when KSFT_MACHINE_SLOW.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/a91d6ead9d1b1b4b7e276ca58a71ef814f42b7dd.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add tests that exercise full 16 bits of NH weight.
To test the 255:65535, it is necessary to run more packets than for the
other tests. On a debug kernel, the test can take up to a minute, therefore
avoid the test when KSFT_MACHINE_SLOW.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/c0c257c00ad30b07afc3fa5e2afd135925405544.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the context of an offloaded datapath, it may take a while for the ip
link stats to be updated. This causes the test to fail when MZ_DELAY is too
low. Sleep after the packets are sent for the link stats to get up to date.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/8b1971d948273afd7de2da3d6a2ba35200540e55.1723036486.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The nolibc tests can now be properly built with LLVM.
Expose this through run-tests.sh.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-15-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
The target names between GCC and clang differ for s390.
While GCC uses "s390", clang uses "systemz".
This mapping is not handled by tools/scripts/Makefile.include,
so do it in the nolibc-test Makefile.
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-14-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
The logic in clang to find the libgcc.a from a GCC toolchain for a
specific ABI does not work reliably and can lead to errors.
Instead disable libgcc when building with clang, as it's not needed
anyways.
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-13-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
If the user specified their own CFLAGS_EXTRA these should not be
overwritten by `-e`.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-12-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
The cc-option macro from Build.include is not compatible with clang
cross builds, as it does not respect the "--target" and similar flags,
set up by Mekfile.include.
Provide a custom variant which works correctly.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-11-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Makefile.include can modify CC and CFLAGS for usage with clang.
Make use of it.
Makefile.include is currently used to handle the O= variable.
This is incompatible with the LLVM= handling as for O= it has to be
included as early as possible, while for LLVM= it needs to be included
after CFLAGS are set up.
To avoid this incompatibility, switch the O= handling to custom logic.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-10-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
The nolibc-test Makefile includes various other Makefiles from the tree.
At first these are included with relative paths like
"../../../build/Build.include" but as soon as $(srctree) is set up,
the inclusions use that instead to build full paths.
To keep the style of inclusions consistent, perform the setup
$(srctree) as early as possible and use it for all inclusions.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-9-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Clang on higher optimization levels detects that NULL is passed to
printf("%s") and warns about it.
While printf() from nolibc gracefully handles that NULL,
it is undefined behavior as per POSIX, so the warning is reasonable.
Avoid the warning by transforming NULL into a non-NULL placeholder.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-8-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
When nolibc-test is so broken, it doesn't even start,
don't report success.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-7-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
We need the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull fd bitmap fix from Al Viro:
"Fix bitmap corruption on close_range() by cleaning up
copy_fd_bitmaps()"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix bitmap corruption on close_range() with CLOSE_RANGE_UNSHARE
|
|
Add a test for dumping RSS contexts. Make sure indir table
and key are sane when contexts are created with various
combination of inputs. Test the dump filtering by ifname
and start-context.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Include the "name" of the context in the comment for traffic
checks. Makes it easier to reason about which context failed
when we loop over 32 contexts (it may matter if we failed in
first vs last, for example).
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CONFIG_RUST depends on !CONFIG_GCC_PLUGINS. Disable CONFIG_GCC_PLUGINS
in rust/config file to make sure it doesn't get enabled.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
If adding multiple config files to the merge_config.sh script and
rust/config is the fist one, then the last config fragment in this file
and the first config fragment in the second file won't be set, since
there isn't a newline in this file, so those two fragements end up at
the same row like:
CONFIG_SAMPLE_RUST_PRINT=mCONFIG_FRAGMENT=y
And non of those will be enabled when running 'olddefconfig' after.
Fixing the issue by adding a newline to the file.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
After enabling UDP GSO for devices not offering checksum offload, we have
hit a regression where a bad offload warning can be triggered when sending
a datagram with IPv6 extension headers.
Extend the UDP GSO IPv6 tests to cover this scenario.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-3-f5c5b4149ab9@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cxl_test unit test environment on qemu always hits below call trace
with KASAN enabled:
BUG: KASAN: slab-out-of-bounds in cxl_setup_parent_dport+0x480/0x530 [cxl_core]
Read of size 1 at addr ff110000676014f8 by task (udev-worker)/676[ 24.424403] CPU: 2 PID: 676 Comm: (udev-worker) Tainted: G O N 6.10.0-qemucxl #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20240214-2.el9 02/14/2024
Call Trace:
<TASK>
dump_stack_lvl+0xea/0x150
print_report+0xce/0x610
? kasan_complete_mode_report_info+0x40/0x200
kasan_report+0xcc/0x110
__asan_report_load1_noabort+0x18/0x20
cxl_setup_parent_dport+0x480/0x530 [cxl_core]
cxl_mem_probe+0x49b/0xaa0 [cxl_mem]
cxl_test module models a CXL topology for testing, it creates some
emulated dports with platform devices in the CXL topology, so the
dport_dev of an emulated dport points to a platform device rather than a
pci device or a pci host bridge in the case. Currently,
cxl_setup_parent_dport() is used to set up RAS and AER capability on the
dport connected to the CXL memory device, but cxl_test does not support
RAS or AER functionality yet, so the fix is implementing a
__wrap_cxl_setup_parent_dport() to filter out all emulated dports,
guarantees only real dports can be handled by cxl_setup_parent_dport().
Fixes: f05fd10d138d ("cxl/pci: Add RCH downstream port AER register discovery")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Closes: https://lore.kernel.org/linux-cxl/ZrHTBp2O+HtUe6kt@xpf.sh.intel.com/T/#t
Signed-off-by: Li Ming <ming4.li@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240809082750.3015641-3-ming4.li@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
This adds some basic self-testing infrastructure for RDS-TCP.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since 2005 glibc has passed argc, argv, and envp to all constructors.
As it is cheap and easy to do so, mirror that behaviour in nolibc.
This makes it easier to migrate applications to nolibc.
Link: https://lore.kernel.org/r/20240728-nolibc-constructor-args-v1-1-36d0bf5cd4c0@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Add tests to set TCP sockopt TCP_BPF_SOCK_OPS_CB_FLAGS via
bpf_setsockopt() and use a cgroup/getsockopt program to retrieve
the value to verify it was set.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20240808150558.1035626-3-alan.maguire@oracle.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Link: https://patch.msgid.link/20240808170148.3629934-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
Current release - regressions:
- eth: bnxt_en: fix memory out-of-bounds in bnxt_fill_hw_rss_tbl() on
older chips
Current release - new code bugs:
- ethtool: fix off-by-one error / kdoc contradicting the code for max
RSS context IDs
- Bluetooth: hci_qca:
- QCA6390: fix support on non-DT platforms
- QCA6390: don't call pwrseq_power_off() twice
- fix a NULL-pointer derefence at shutdown
- eth: ice: fix incorrect assigns of FEC counters
Previous releases - regressions:
- mptcp: fix handling endpoints with both 'signal' and 'subflow'
flags set
- virtio-net: fix changing ring count when vq IRQ coalescing not
supported
- eth: gve: fix use of netif_carrier_ok() during reconfig / reset
Previous releases - always broken:
- eth: idpf: fix bugs in queue re-allocation on reconfig / reset
- ethtool: fix context creation with no parameters
Misc:
- linkwatch: use system_unbound_wq to ease RTNL contention"
* tag 'net-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (41 commits)
net: dsa: microchip: disable EEE for KSZ8567/KSZ9567/KSZ9896/KSZ9897.
ethtool: Fix context creation with no parameters
net: ethtool: fix off-by-one error in max RSS context IDs
net: pse-pd: tps23881: include missing bitfield.h header
net: fec: Stop PPS on driver remove
net: bcmgenet: Properly overlay PHY and MAC Wake-on-LAN capabilities
l2tp: fix lockdep splat
net: stmmac: dwmac4: fix PCS duplex mode decode
idpf: fix UAFs when destroying the queues
idpf: fix memleak in vport interrupt configuration
idpf: fix memory leaks and crashes while performing a soft reset
bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()
net: dsa: bcm_sf2: Fix a possible memory leak in bcm_sf2_mdio_register()
net/smc: add the max value of fallback reason count
Bluetooth: hci_sync: avoid dup filtering when passive scanning with adv monitor
Bluetooth: l2cap: always unlock channel in l2cap_conless_channel()
Bluetooth: hci_qca: fix a NULL-pointer derefence at shutdown
Bluetooth: hci_qca: fix QCA6390 support on non-DT platforms
Bluetooth: hci_qca: don't call pwrseq_power_off() twice for QCA6390
ice: Fix incorrect assigns of FEC counts
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Nine hotfixes. Five are cc:stable, the others either pertain to
post-6.10 material or aren't considered necessary for earlier kernels.
Five are MM and four are non-MM. No identifiable theme here - please
see the individual changelogs"
* tag 'mm-hotfixes-stable-2024-08-07-18-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
padata: Fix possible divide-by-0 panic in padata_mt_helper()
mailmap: update entry for David Heidelberg
memcg: protect concurrent access to mem_cgroup_idr
mm: shmem: fix incorrect aligned index when checking conflicts
mm: shmem: avoid allocating huge pages larger than MAX_PAGECACHE_ORDER for shmem
mm: list_lru: fix UAF for memory cgroup
kcov: properly check for softirq context
MAINTAINERS: Update LTP members and web
selftests: mm: add s390 to ARCH check
|
|
commit 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
changed the env variable for the architecture from MACHINE to ARCH.
This is preventing 3 required TEST_GEN_FILES from being included when
cross compiling s390x and errors when trying to run the test suite. This
is due to the ARCH variable already being set and the arch folder name
being s390.
Add "s390" to the filtered list to cover this case and have the 3 files
included in the build.
Link: https://lkml.kernel.org/r/20240724213517.23918-1-npache@redhat.com
Fixes: 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
Signed-off-by: Nico Pache <npache@redhat.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A regression happened where running the ownership test passes on the first
iteration but fails running it a second time. This was caught and fixed,
but a later change brought it back. The regression was missed because the
automated tests only run the tests once per boot.
Change the ownership test to iterate through the tests twice, as this will
catch the regression with a single run.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a basic uprobe testcase which checks whether add/remove/trace
operations works on /bin/sh.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
