| Age | Commit message (Collapse) | Author |
|---|
|
Currently the mount_setattr_test fails on machines with a 64K PAGE_SIZE,
with errors such as:
# RUN mount_setattr_idmapped.invalid_fd_negative ...
mkfs.ext4: No space left on device while writing out and closing file system
# mount_setattr_test.c:1055:invalid_fd_negative:Expected system("mkfs.ext4 -q /mnt/C/ext4.img") (256) == 0 (0)
# invalid_fd_negative: Test terminated by assertion
# FAIL mount_setattr_idmapped.invalid_fd_negative
not ok 12 mount_setattr_idmapped.invalid_fd_negative
The code creates a 100,000 byte tmpfs:
ASSERT_EQ(mount("testing", "/mnt", "tmpfs", MS_NOATIME | MS_NODEV,
"size=100000,mode=700"), 0);
And then a little later creates a 2MB ext4 filesystem in that tmpfs:
ASSERT_EQ(ftruncate(img_fd, 1024 * 2048), 0);
ASSERT_EQ(system("mkfs.ext4 -q /mnt/C/ext4.img"), 0);
At first glance it seems like that should never work, after all 2MB is
larger than 100,000 bytes. However the filesystem image doesn't actually
occupy 2MB on "disk" (actually RAM, due to tmpfs). On 4K kernels the
ext4.img uses ~84KB of actual space (according to du), which just fits.
However on 64K PAGE_SIZE kernels the ext4.img takes at least 256KB,
which is too large to fit in the tmpfs, hence the errors.
It seems fraught to rely on the ext4.img taking less space on disk than
the allocated size, so instead create the tmpfs with a size of 2MB. With
that all 21 tests pass on 64K PAGE_SIZE kernels.
Fixes: 01eadc8dd96d ("tests: add mount_setattr() selftests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20241115134114.1219555-1-mpe@ellerman.id.au
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
|
|
QEMU for LoongArch does not yet support shutdown/restart through ACPI.
Use the pvpanic driver to enable shutdowns.
This requires 9.1.0 for shutdown support in pvpanic, but that is the
requirement of kunit on LoongArch anyways.
Link: https://lore.kernel.org/r/20241111-kunit-loongarch-v2-3-7676eb5f2da3@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Not all platforms support machine reboot.
If it a proper reboot is not supported the machine will hang.
Allow the QEMU configuration to override the necessary shutdown mode for
the specific system under test.
Link: https://lore.kernel.org/r/20241111-kunit-loongarch-v2-2-7676eb5f2da3@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add a basic config to run kunit tests on LoongArch.
This requires QEMU 9.1.0 or later for the necessary direct kernel boot
support.
Link: https://lore.kernel.org/r/20241111-kunit-loongarch-v2-1-7676eb5f2da3@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add flag --failed to kunit.py to print only failed tests. This printing
is done after running is over.
This patch also adds the method print_test() that will also print your
Test object. Before, all printing of tests occurred during parsing. This
method could be useful in the future when converting to/from KTAP to this
pretty-print output.
Link: https://lore.kernel.org/r/20241113222406.1590372-2-rmoar@google.com
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Allow only printing the summary at the end of a test run, rather than all
individual test results. This summary will list a few failing tests if
there are any.
To use:
./tools/testing/kunit/kunit.py run --summary
Link: https://lore.kernel.org/r/20241113222406.1590372-1-rmoar@google.com
Signed-off-by: Rae Moar <rmoar@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Uprobes:
- Add BPF session support (Jiri Olsa)
- Switch to RCU Tasks Trace flavor for better performance (Andrii
Nakryiko)
- Massively increase uretprobe SMP scalability by SRCU-protecting
the uretprobe lifetime (Andrii Nakryiko)
- Kill xol_area->slot_count (Oleg Nesterov)
Core facilities:
- Implement targeted high-frequency profiling by adding the ability
for an event to "pause" or "resume" AUX area tracing (Adrian
Hunter)
VM profiling/sampling:
- Correct perf sampling with guest VMs (Colton Lewis)
New hardware support:
- x86/intel: Add PMU support for Intel ArrowLake-H CPUs (Dapeng Mi)
Misc fixes and enhancements:
- x86/intel/pt: Fix buffer full but size is 0 case (Adrian Hunter)
- x86/amd: Warn only on new bits set (Breno Leitao)
- x86/amd/uncore: Avoid a false positive warning about snprintf
truncation in amd_uncore_umc_ctx_init (Jean Delvare)
- uprobes: Re-order struct uprobe_task to save some space
(Christophe JAILLET)
- x86/rapl: Move the pmu allocation out of CPU hotplug (Kan Liang)
- x86/rapl: Clean up cpumask and hotplug (Kan Liang)
- uprobes: Deuglify xol_get_insn_slot/xol_free_insn_slot paths (Oleg
Nesterov)"
* tag 'perf-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
perf/core: Correct perf sampling with guest VMs
perf/x86: Refactor misc flag assignments
perf/powerpc: Use perf_arch_instruction_pointer()
perf/core: Hoist perf_instruction_pointer() and perf_misc_flags()
perf/arm: Drop unused functions
uprobes: Re-order struct uprobe_task to save some space
perf/x86/amd/uncore: Avoid a false positive warning about snprintf truncation in amd_uncore_umc_ctx_init
perf/x86/intel: Do not enable large PEBS for events with aux actions or aux sampling
perf/x86/intel/pt: Add support for pause / resume
perf/core: Add aux_pause, aux_resume, aux_start_paused
perf/x86/intel/pt: Fix buffer full but size is 0 case
uprobes: SRCU-protect uretprobe lifetime (with timeout)
uprobes: allow put_uprobe() from non-sleepable softirq context
perf/x86/rapl: Clean up cpumask and hotplug
perf/x86/rapl: Move the pmu allocation out of CPU hotplug
uprobe: Add support for session consumer
uprobe: Add data pointer to consumer handlers
perf/x86/amd: Warn only on new bits set
uprobes: fold xol_take_insn_slot() into xol_get_insn_slot()
uprobes: kill xol_area->slot_count
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Frederic Weisbecker:
"SRCU:
- Introduction of the new SRCU-lite flavour with a new pair of
srcu_read_[un]lock_lite() APIs. In practice the read side using
this flavour becomes lighter by removing a full memory barrier on
LOCK and a full memory barrier on UNLOCK. This comes at the expense
of a higher latency write side with two (in the best case of a
snaphot of unused read-sides) or more RCU grace periods on the
update side which now assumes by itself the whole full ordering
guarantee against the LOCK/UNLOCK counters on both indexes, along
with the accesses performed inside.
Uretprobes is a known potential user.
Note this doesn't replace the default normal flavour of SRCU which
still behaves the same as usual.
- Add testing of SRCU-lite through rcutorture and rcuscale
- Various cleanups on the way.
Fixes:
- Allow short-circuiting RCU-TASKS-RUDE grace periods on
architectures that have sane noinstr boundaries forbidding tracing
on low-level idle and kernel entry code. RCU-TASKS is enough on
such configurations because it involves an RCU grace period that
waits for all idle tasks to either schedule out voluntarily or
enter into RCU unwatched noinstr code.
- Allow and test start_poll_synchronize_rcu() with IRQs disabled.
- Mention rcuog kthreads in relevant documentation and Kconfig help
- Various fixes and consolidations
rcutorture:
- Add --no-affinity on tools to leave the affinity setting of guests
up to the user.
- Add guest_os_delay parameter to rcuscale for better warm-up
control.
- Fix and improve some rcuscale error handling.
- Various cleanups and fixes
stall:
- Remove dead code
- Stop dumping tasks if a stalled grace period eventually ended
midway as that only produces confusing output.
- Optimize detection of stalling CPUs and avoid useless node locking
otherwise.
NOCB:
- Fix rcu_barrier() hang due to a race against callbacks
deoffloading. This is not yet used, except by rcutorture, and waits
for its promised cpusets interface.
- Remove leftover function declaration"
* tag 'rcu.release.v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (42 commits)
rcuscale: Remove redundant WARN_ON_ONCE() splat
rcuscale: Do a proper cleanup if kfree_scale_init() fails
srcu: Unconditionally record srcu_read_lock_lite() in ->srcu_reader_flavor
srcu: Check for srcu_read_lock_lite() across all CPUs
srcu: Remove smp_mb() from srcu_read_unlock_lite()
rcutorture: Avoid printing cpu=-1 for no-fault RCU boost failure
rcuscale: Add guest_os_delay module parameter
refscale: Correct affinity check
torture: Add --no-affinity parameter to kvm.sh
rcu/nocb: Fix missed RCU barrier on deoffloading
rcu/kvfree: Fix data-race in __mod_timer / kvfree_call_rcu
rcu/srcutiny: don't return before reenabling preemption
rcu-tasks: Remove open-coded one-byte cmpxchg() emulation
doc: Remove kernel-parameters.txt entry for rcutorture.read_exit
rcutorture: Test start-poll primitives with interrupts disabled
rcu: Permit start_poll_synchronize_rcu*() with interrupts disabled
rcu: Allow short-circuiting of synchronize_rcu_tasks_rude()
doc: Add rcuog kthreads to kernel-per-CPU-kthreads.rst
rcu: Add rcuog kthreads to RCU_NOCB_CPU help text
rcu: Use the BITS_PER_LONG macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
- Fix potential error due to missing #include on s390
- Compatibility with -Wmissing-fallthrough
- Run qemu with more memory during tests
* tag 'nolibc.2024.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
selftests/nolibc: start qemu with 1 GiB of memory
tools/nolibc: compiler: add macro __nolibc_fallthrough
tools/nolibc: s390: include std.h
|
|
Merge in late fixes to prepare for the 6.13 net-next PR.
Conflicts:
include/linux/phy.h
41ffcd95015f net: phy: fix phylib's dual eee_enabled
721aa69e708b net: phy: convert eee_broken_modes to a linkmode bitmap
https://lore.kernel.org/all/20241118135512.1039208b@canb.auug.org.au/
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
2160428bcb20 net: txgbe: fix null pointer to pcs
2160428bcb20 net: txgbe: remove GPIO interrupt controller
Adjacent commits:
include/linux/phy.h
41ffcd95015f net: phy: fix phylib's dual eee_enabled
516a5f11eb97 net: phy: respect cached advertising when re-enabling EEE
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
page_frag test module is an out of tree module, but built
using KDIR as the main kernel tree, the mm test suite is
just getting skipped if newly added page_frag test module
fails to compile due to kernel not yet compiled.
Fix the above problem by ensuring both kernel is built first
and a newer kernel which has page_frag_cache.h is used.
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Alexander Duyck <alexanderduyck@fb.com>
CC: Linux-MM <linux-mm@kvack.org>
Fixes: 7fef0dec415c ("mm: page_frag: add a test module for page_frag")
Fixes: 65941f10caf2 ("mm: move the page fragment allocator from page_alloc into its own file")
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20241119033012.257525-1-linyunsheng@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add selftest case to check the send and receive throughput.
Supported link modes between local NIC driver and partner
are varied. Then send and receive throughput is captured
and verified. Test uses iperf3 tool.
Add iperf3 server/client function in GenerateTraffic class.
Signed-off-by: Mohan Prasad J <mohan.prasad@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add selftest case for testing the speed and duplex state of
local NIC driver and the partner based on the supported
link modes obtained from the ethtool. Speed and duplex states
are varied and verified using ethtool.
Signed-off-by: Mohan Prasad J <mohan.prasad@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add selftest file for the link layer tests of a NIC driver.
Test for auto-negotiation is added.
Add LinkConfig class for changing link layer configs.
Selftest makes use of ksft modules and ethtool.
Include selftest file in the Makefile.
Signed-off-by: Mohan Prasad J <mohan.prasad@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a new tests in sockmap_basic.c to test SK_PASS for sockmap
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241118030910.36230-3-mrpre@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some distros may not load nf_conntrack by default, which will cause
subsequent nf_conntrack sets to fail. Load this module if it is not
already loaded.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
[ Jason: add [[ -e ... ]] check so this works in the qemu harness. ]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20241117212030.629159-4-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bpf_offload caught a spurious warning in TC recently, but the error
message did not provide enough information to know what the problem
is:
FAIL: Found 'netdevsim' in command output, leaky extack?
Add the extack to the output:
FAIL: Unexpected command output, leaky extack? ('netdevsim', 'Warning: Filter with specified priority/protocol not found.')
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sanity checks are going to get silently cast to unsigned
and always pass. Cast the sizeof to signed size.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241115003248.733862-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for running Linux in a protected VM under the Arm
Confidential Compute Architecture (CCA)
- Guarded Control Stack user-space support. Current patches follow the
x86 ABI of implicitly creating a shadow stack on clone(). Subsequent
patches (already on the list) will add support for clone3() allowing
finer-grained control of the shadow stack size and placement from
libc
- AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are
getting close with the upcoming dpISA support)
- Other arch features:
- In-kernel use of the memcpy instructions, FEAT_MOPS (previously
only exposed to user; uaccess support not merged yet)
- MTE: hugetlbfs support and the corresponding kselftests
- Optimise CRC32 using the PMULL instructions
- Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG
- Optimise the kernel TLB flushing to use the range operations
- POE/pkey (permission overlays): further cleanups after bringing
the signal handler in line with the x86 behaviour for 6.12
- arm64 perf updates:
- Support for the NXP i.MX91 PMU in the existing IMX driver
- Support for Ampere SoCs in the Designware PCIe PMU driver
- Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC
- Support for Samsung's 'Mongoose' CPU PMU
- Support for PMUv3.9 finer-grained userspace counter access
control
- Switch back to platform_driver::remove() now that it returns
'void'
- Add some missing events for the CXL PMU driver
- Miscellaneous arm64 fixes/cleanups:
- Page table accessors cleanup: type updates, drop unused macros,
reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity
check addresses before runtime P4D/PUD folding
- Command line override for ID_AA64MMFR0_EL1.ECV (advertising the
FEAT_ECV for the generic timers) allowing Linux to boot with
firmware deployments that don't set SCTLR_EL3.ECVEn
- ACPI/arm64: tighten the check for the array of platform timer
structures and adjust the error handling procedure in
gtdt_parse_timer_block()
- Optimise the cache flush for the uprobes xol slot (skip if no
change) and other uprobes/kprobes cleanups
- Fix the context switching of tpidrro_el0 when kpti is enabled
- Dynamic shadow call stack fixes
- Sysreg updates
- Various arm64 kselftest improvements
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits)
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
arm64/ptrace: Clarify documentation of VL configuration via ptrace
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
...
|
|
- improvement of the way hid-bpf coexists with specific drivers (others than
hid-generic) that are already bound to devices (Benjamin Tissoires)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfs update from Christian Brauner:
"This adds a new ioctl to retrieve information about a pidfd.
A common pattern when using pidfds is having to get information about
the process, which currently requires /proc being mounted, resolving
the fd to a pid, and then do manual string parsing of /proc/N/status
and friends. This needs to be reimplemented over and over in all
userspace projects (e.g.: it has been reimplemented in systemd, dbus,
dbus-daemon, polkit so far), and requires additional care in checking
that the fd is still valid after having parsed the data, to avoid
races.
Having a programmatic API that can be used directly removes all these
requirements, including having /proc mounted.
As discussed at LPC24, add an ioctl with an extensible struct so that
more parameters can be added later if needed. Start with returning
pid/tgid/ppid and some creds unconditionally, and cgroupid optionally"
* tag 'vfs-6.13.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfd: add ioctl to retrieve pid info
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull overlayfs updates from Christian Brauner:
"Make overlayfs support specifying layers through file descriptors.
Currently overlayfs only allows specifying layers through path names.
This is inconvenient for users that want to assemble an overlayfs
mount purely based on file descriptors:
This enables user to specify both:
fsconfig(fd_overlay, FSCONFIG_SET_FD, "upperdir+", NULL, fd_upper);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "workdir+", NULL, fd_work);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "lowerdir+", NULL, fd_lower1);
fsconfig(fd_overlay, FSCONFIG_SET_FD, "lowerdir+", NULL, fd_lower2);
in addition to:
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "upperdir+", "/upper", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "workdir+", "/work", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "lowerdir+", "/lower1", 0);
fsconfig(fd_overlay, FSCONFIG_SET_STRING, "lowerdir+", "/lower2", 0);
There's also a large set of new overlayfs selftests to test new
features and some older properties"
* tag 'vfs-6.13.ovl' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add test for specifying 500 lower layers
selftests: add overlayfs fd mounting selftests
selftests: use shared header
Documentation,ovl: document new file descriptor based layers
ovl: specify layers via file descriptors
fs: add helper to use mount option as path or fd
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This contains changes the changes for files for this cycle:
- Introduce a new reference counting mechanism for files.
As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop
it has O(N^2) behaviour under contention with N concurrent
operations and it is in a hot path in __fget_files_rcu().
The rcuref infrastructures remedies this problem by using an
unconditional increment relying on safe- and dead zones to make
this work and requiring rcu protection for the data structure in
question. This not just scales better it also introduces overflow
protection.
However, in contrast to generic rcuref, files require a memory
barrier and thus cannot rely on *_relaxed() atomic operations and
also require to be built on atomic_long_t as having massive amounts
of reference isn't unheard of even if it is just an attack.
This adds a file specific variant instead of making this a generic
library.
This has been tested by various people and it gives consistent
improvement up to 3-5% on workloads with loads of threads.
- Add a fastpath for find_next_zero_bit(). Skip 2-levels searching
via find_next_zero_bit() when there is a free slot in the word that
contains the next fd. This improves pts/blogbench-1.1.0 read by 8%
and write by 4% on Intel ICX 160.
- Conditionally clear full_fds_bits since it's very likely that a bit
in full_fds_bits has been cleared during __clear_open_fds(). This
improves pts/blogbench-1.1.0 read up to 13%, and write up to 5% on
Intel ICX 160.
- Get rid of all lookup_*_fdget_rcu() variants. They were used to
lookup files without taking a reference count. That became invalid
once files were switched to SLAB_TYPESAFE_BY_RCU and now we're
always taking a reference count. Switch to an already existing
helper and remove the legacy variants.
- Remove pointless includes of <linux/fdtable.h>.
- Avoid cmpxchg() in close_files() as nobody else has a reference to
the files_struct at that point.
- Move close_range() into fs/file.c and fold __close_range() into it.
- Cleanup calling conventions of alloc_fdtable() and expand_files().
- Merge __{set,clear}_close_on_exec() into one.
- Make __set_open_fd() set cloexec as well instead of doing it in two
separate steps"
* tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add file SLAB_TYPESAFE_BY_RCU recycling stressor
fs: port files to file_ref
fs: add file_ref
expand_files(): simplify calling conventions
make __set_open_fd() set cloexec state as well
fs: protect backing files with rcu
file.c: merge __{set,clear}_close_on_exec()
alloc_fdtable(): change calling conventions.
fs/file.c: add fast path in find_next_fd()
fs/file.c: conditionally clear full_fds
fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd()
move close_range(2) into fs/file.c, fold __close_range() into it
close_files(): don't bother with xchg()
remove pointless includes of <linux/fdtable.h>
get rid of ...lookup...fdget_rcu() family
|
|
llvm 19 fails to compile arena self test:
CLNG-BPF [test_progs] verifier_arena_large.bpf.o
progs/verifier_arena_large.c:90:24: error: unsupported signed division, please convert to unsigned div/mod.
90 | pg_idx = (pg - base) / PAGE_SIZE;
Though llvm <= 18 and llvm >= 20 don't have this issue,
fix the test to avoid the build error.
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Create selftests for PCIe BW control through the PCIe cooling device sysfs
interface.
First, the BW control selftest finds the PCIe Port to test with. By
default, the PCIe Port with the highest Link Speed is selected but
another PCIe Port can be provided with -d parameter.
The actual test steps the cur_state of the cooling device one-by-one
from max_state to what the cur_state was initially. The speed change
is confirmed by observing the current_link_speed for the corresponding
PCIe Port.
Link: https://lore.kernel.org/r/20241018144755.7875-10-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Check that only one notification is produced for various FDB edit
operations.
Regarding the ip_link_add() and ip_link_master() helpers. This pattern of
action plus corresponding defer is bound to come up often, and a dedicated
vocabulary to capture it will be handy. tunnel_create() and vlan_create()
from forwarding/lib.sh are somewhat opaque and perhaps too kitchen-sinky,
so I tried to go in the opposite direction with these ones, and wrapped
only the bare minimum to schedule a corresponding cleanup.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/910c5880ae6d3b558d6889cbdba2be690c2615c6.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A number of selftests run processes in the background and need to kill them
afterwards. Instead for everyone to open-code the kill / wait / redirect
mantra, add a helper in net/lib.sh. Convert existing open-code sites.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Link: https://patch.msgid.link/a9db102067d741c118f0bd93b10c75e2a34665ea.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For logging to be useful, something has to set RET and retmsg by calling
ret_set_ksft_status(). There is a suite of functions to that end in
forwarding/lib: check_err, check_fail et.al. Move them to net/lib.sh so
that every net test can use them.
Existing lib.sh users might be using these same names for their functions.
However lib.sh is always sourced near the top of the file (checked), and
whatever new definitions will simply override the ones provided by lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/f488a00dc85b8e0c1f3c71476b32b21b5189a847.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It would be good to use the same mechanism for scheduling and dispatching
general net tests as the many forwarding tests already use. To that end,
move the logging helpers to net/lib.sh so that every net test can use them.
Existing lib.sh users might be using the name themselves. However lib.sh is
always sourced near the top of the file (checked), and whatever new
definition will simply override the one provided by lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/a6fc083486493425b2c61185c327845b6ce3233a.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Many net selftests invent their own logging helpers. These really should be
in a library sourced by these tests. Currently forwarding/lib.sh has a
suite of perfectly fine logging helpers, but sourcing a forwarding/ library
from a higher-level directory smells of layering violation. In this patch,
move the logging helpers to net/lib.sh so that every net test can use them.
Together with the logging helpers, it's also necessary to move
pause_on_fail(), and EXIT_STATUS and RET.
Existing lib.sh users might be using these same names for their functions
or variables. However lib.sh is always sourced near the top of the
file (checked), and whatever new definitions will simply override the ones
provided by lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/edd3785a3bd72ffbe1409300989e993ee50ae98b.1731589511.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Update .gitignore in selftest to skip conntrack_reverse_clash,
from Li Zhijian.
2) Fix conntrack_dump_flush return values, from Guan Jing.
3) syzbot found that ipset's bitmap type does not properly checks for
bitmap's first ip, from Jeongjun Park.
* tag 'nf-24-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: add missing range check in bitmap_ip_uadt
selftests: netfilter: Fix missing return values in conntrack_dump_flush
selftests: netfilter: Add missing gitignore file
====================
Link: https://patch.msgid.link/20241114125723.82229-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'rcu/srcu' into rcu/dev
|
|
The combination of ntuple action (ring_cookie) and RSS context can
cause an ntuple rule to target a higher queue than appears in any
RSS indirection table or directly in the ntuple rule, since the two
numbers are added together. Verify the logic that prevents reducing
the queue count in this case.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/58276b800ab78c0a79c1918046ccae7fe45ba802.1731499022.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test creates an ntuple filter with 'action 2' and an RSS context whose
indirection table has entries 0 and 1. Resulting traffic should go to
queues 2 and 3; verify that it never hits queues 0 and 1.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/114afdf4d2867f72ed27751e8e08fe8b128a8529.1731499022.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sfc hardware does not support filters with only ipproto + dst-port;
adding dst-ip to the flow spec allows the rss_ctx test to be run on
these devices.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://patch.msgid.link/8e5d23c8f21310c23c080cc7bcd31b76f8fd3096.1731499022.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
token/obj_priv_implicit_token_envvar test may fail in an environment
where the process executing tests can not write to the root path.
Example:
https://github.com/libbpf/libbpf/actions/runs/11844507007/job/33007897936
Change default path used by the test to /tmp/bpf-token-fs, and make it
runtime configurable via an environment variable.
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241115003853.864397-1-ihor.solodrai@pm.me
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2024-11-14
We've added 9 non-merge commits during the last 4 day(s) which contain
a total of 3 files changed, 226 insertions(+), 84 deletions(-).
The main changes are:
1) Fixes to bpf_msg_push/pop_data and test_sockmap. The changes has
dependency on the other changes in the bpf-next/net branch,
from Zijian Zhang.
2) Drop netns codes from mptcp test. Reuse the common helpers in
test_progs, from Geliang Tang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf, sockmap: Fix sk_msg_reset_curr
bpf, sockmap: Several fixes to bpf_msg_pop_data
bpf, sockmap: Several fixes to bpf_msg_push_data
selftests/bpf: Add more tests for test_txmsg_push_pop in test_sockmap
selftests/bpf: Add push/pop checking for msg_verify_data in test_sockmap
selftests/bpf: Fix total_bytes in msg_loop_rx in test_sockmap
selftests/bpf: Fix SENDPAGE data logic in test_sockmap
selftests/bpf: Add txmsg_pass to pull/push/pop in test_sockmap
selftests/bpf: Drop netns helpers in mptcp
====================
Link: https://patch.msgid.link/20241114202832.3187927-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc8).
Conflicts:
tools/testing/selftests/net/.gitignore
252e01e68241 ("selftests: net: add netlink-dumps to .gitignore")
be43a6b23829 ("selftests: ncdevmem: Move ncdevmem under drivers/net/hw")
https://lore.kernel.org/all/20241113122359.1b95180a@canb.auug.org.au/
drivers/net/phy/phylink.c
671154f174e0 ("net: phylink: ensure PHY momentary link-fails are handled")
7530ea26c810 ("net: phylink: remove "using_mac_select_pcs"")
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
5b366eae7193 ("stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines")
e96321fad3ad ("net: ethernet: Switch back to struct platform_driver::remove()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth.
Quite calm week. No new regression under investigation.
Current release - regressions:
- eth: revert "igb: Disable threaded IRQ for igb_msix_other"
Current release - new code bugs:
- bluetooth: btintel: direct exception event to bluetooth stack
Previous releases - regressions:
- core: fix data-races around sk->sk_forward_alloc
- netlink: terminate outstanding dump on socket close
- mptcp: error out earlier on disconnect
- vsock: fix accept_queue memory leak
- phylink: ensure PHY momentary link-fails are handled
- eth: mlx5:
- fix null-ptr-deref in add rule err flow
- lock FTE when checking if active
- eth: dwmac-mediatek: fix inverted handling of mediatek,mac-wol
Previous releases - always broken:
- sched: fix u32's systematic failure to free IDR entries for hnodes.
- sctp: fix possible UAF in sctp_v6_available()
- eth: bonding: add ns target multicast address to slave device
- eth: mlx5: fix msix vectors to respect platform limit
- eth: icssg-prueth: fix 1 PPS sync"
* tag 'net-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: sched: u32: Add test case for systematic hnode IDR leaks
selftests: bonding: add ns multicast group testing
bonding: add ns target multicast address to slave device
net: ti: icssg-prueth: Fix 1 PPS sync
stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines
net: Make copy_safe_from_sockptr() match documentation
net: stmmac: dwmac-mediatek: Fix inverted handling of mediatek,mac-wol
ipmr: Fix access to mfc_cache_list without lock held
samples: pktgen: correct dev to DEV
net: phylink: ensure PHY momentary link-fails are handled
mptcp: pm: use _rcu variant under rcu_read_lock
mptcp: hold pm lock when deleting entry
mptcp: update local address flags when setting it
net: sched: cls_u32: Fix u32's systematic failure to free IDR entries for hnodes.
MAINTAINERS: Re-add cancelled Renesas driver sections
Revert "igb: Disable threaded IRQ for igb_msix_other"
Bluetooth: btintel: Direct exception event to bluetooth stack
Bluetooth: hci_core: Fix calling mgmt_device_connected
virtio/vsock: Improve MSG_ZEROCOPY error handling
vsock: Fix sk_error_queue memory leak
...
|
|
Add selftest cases for IOMMU_IOAS_CHANGE_PROCESS.
Link: https://patch.msgid.link/r/1731527497-16091-5-git-send-email-steven.sistare@oracle.com
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Fix the bug of some functions were missing return values.
Fixes: eff3c558bb7e ("netfilter: ctnetlink: support filtering by zone")
Signed-off-by: Guan Jing <guanjing@cmss.chinamobile.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Compiled binary files should be added to .gitignore
'git status' complains:
Untracked files:
(use "git add <file>..." to include in what will be committed)
net/netfilter/conntrack_reverse_clash
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
* for-next/pkey-signal:
: Bring arm64 pkey signal delivery in line with the x86 behaviour
selftests/mm: Fix unused function warning for aarch64_write_signal_pkey()
selftests/mm: Define PKEY_UNRESTRICTED for pkey_sighandler_tests
selftests/mm: Enable pkey_sighandler_tests on arm64
selftests/mm: Use generic pkey register manipulation
arm64: signal: Remove unused macro
arm64: signal: Remove unnecessary check when saving POE state
arm64: signal: Improve POR_EL0 handling to avoid uaccess failures
firmware: arm_sdei: Fix the input parameter of cpuhp_remove_state()
Revert "kasan: Disable Software Tag-Based KASAN with GCC"
kasan: Fix Software Tag-Based KASAN with GCC
kasan: Disable Software Tag-Based KASAN with GCC
Documentation/protection-keys: add AArch64 to documentation
arm64: set POR_EL0 for kernel threads
# Conflicts:
# arch/arm64/kernel/signal.c
|
|
'for-next/tlb', 'for-next/misc', 'for-next/mte', 'for-next/sysreg', 'for-next/stacktrace', 'for-next/hwcap3', 'for-next/kselftest', 'for-next/crc32', 'for-next/guest-cca', 'for-next/haft' and 'for-next/scs', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: Switch back to struct platform_driver::remove()
perf: arm_pmuv3: Add support for Samsung Mongoose PMU
dt-bindings: arm: pmu: Add Samsung Mongoose core compatible
perf/dwc_pcie: Fix typos in event names
perf/dwc_pcie: Add support for Ampere SoCs
ARM: pmuv3: Add missing write_pmuacr()
perf/marvell: Marvell PEM performance monitor support
perf/arm_pmuv3: Add PMUv3.9 per counter EL0 access control
perf/dwc_pcie: Convert the events with mixed case to lowercase
perf/cxlpmu: Support missing events in 3.1 spec
perf: imx_perf: add support for i.MX91 platform
dt-bindings: perf: fsl-imx-ddr: Add i.MX91 compatible
drivers perf: remove unused field pmu_node
* for-next/gcs: (42 commits)
: arm64 Guarded Control Stack user-space support
kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c
arm64/gcs: Fix outdated ptrace documentation
kselftest/arm64: Ensure stable names for GCS stress test results
kselftest/arm64: Validate that GCS push and write permissions work
kselftest/arm64: Enable GCS for the FP stress tests
kselftest/arm64: Add a GCS stress test
kselftest/arm64: Add GCS signal tests
kselftest/arm64: Add test coverage for GCS mode locking
kselftest/arm64: Add a GCS test program built with the system libc
kselftest/arm64: Add very basic GCS test program
kselftest/arm64: Always run signals tests with GCS enabled
kselftest/arm64: Allow signals tests to specify an expected si_code
kselftest/arm64: Add framework support for GCS to signal handling tests
kselftest/arm64: Add GCS as a detected feature in the signal tests
kselftest/arm64: Verify the GCS hwcap
arm64: Add Kconfig for Guarded Control Stack (GCS)
arm64/ptrace: Expose GCS via ptrace and core files
arm64/signal: Expose GCS state in signal frames
arm64/signal: Set up and restore the GCS context for signal handlers
arm64/mm: Implement map_shadow_stack()
...
* for-next/probes:
: Various arm64 uprobes/kprobes cleanups
arm64: insn: Simulate nop instruction for better uprobe performance
arm64: probes: Remove probe_opcode_t
arm64: probes: Cleanup kprobes endianness conversions
arm64: probes: Move kprobes-specific fields
arm64: probes: Fix uprobes for big-endian kernels
arm64: probes: Fix simulate_ldr*_literal()
arm64: probes: Remove broken LDR (literal) uprobe support
* for-next/asm-offsets:
: arm64 asm-offsets.c cleanup (remove unused offsets)
arm64: asm-offsets: remove PREEMPT_DISABLE_OFFSET
arm64: asm-offsets: remove DMA_{TO,FROM}_DEVICE
arm64: asm-offsets: remove VM_EXEC and PAGE_SZ
arm64: asm-offsets: remove MM_CONTEXT_ID
arm64: asm-offsets: remove COMPAT_{RT_,SIGFRAME_REGS_OFFSET
arm64: asm-offsets: remove VMA_VM_*
arm64: asm-offsets: remove TSK_ACTIVE_MM
* for-next/tlb:
: TLB flushing optimisations
arm64: optimize flush tlb kernel range
arm64: tlbflush: add __flush_tlb_range_limit_excess()
* for-next/misc:
: Miscellaneous patches
arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled
arm64/ptrace: Clarify documentation of VL configuration via ptrace
acpi/arm64: remove unnecessary cast
arm64/mm: Change protval as 'pteval_t' in map_range()
arm64: uprobes: Optimize cache flushes for xol slot
acpi/arm64: Adjust error handling procedure in gtdt_parse_timer_block()
arm64: fix .data.rel.ro size assertion when CONFIG_LTO_CLANG
arm64/ptdump: Test both PTE_TABLE_BIT and PTE_VALID for block mappings
arm64/mm: Sanity check PTE address before runtime P4D/PUD folding
arm64/mm: Drop setting PTE_TYPE_PAGE in pte_mkcont()
ACPI: GTDT: Tighten the check for the array of platform timer structures
arm64/fpsimd: Fix a typo
arm64: Expose ID_AA64ISAR1_EL1.XS to sanitised feature consumers
arm64: Return early when break handler is found on linked-list
arm64/mm: Re-organize arch_make_huge_pte()
arm64/mm: Drop _PROT_SECT_DEFAULT
arm64: Add command-line override for ID_AA64MMFR0_EL1.ECV
arm64: head: Drop SWAPPER_TABLE_SHIFT
arm64: cpufeature: add POE to cpucap_is_possible()
arm64/mm: Change pgattr_change_is_safe() arguments as pteval_t
* for-next/mte:
: Various MTE improvements
selftests: arm64: add hugetlb mte tests
hugetlb: arm64: add mte support
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64MMFR1_EL1 to DDI0601 2024-09
* for-next/stacktrace:
: arm64 stacktrace improvements
arm64: preserve pt_regs::stackframe during exec*()
arm64: stacktrace: unwind exception boundaries
arm64: stacktrace: split unwind_consume_stack()
arm64: stacktrace: report recovered PCs
arm64: stacktrace: report source of unwind data
arm64: stacktrace: move dump_backtrace() to kunwind_stack_walk()
arm64: use a common struct frame_record
arm64: pt_regs: swap 'unused' and 'pmr' fields
arm64: pt_regs: rename "pmr_save" -> "pmr"
arm64: pt_regs: remove stale big-endian layout
arm64: pt_regs: assert pt_regs is a multiple of 16 bytes
* for-next/hwcap3:
: Add AT_HWCAP3 support for arm64 (also wire up AT_HWCAP4)
arm64: Support AT_HWCAP3
binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4
* for-next/kselftest: (30 commits)
: arm64 kselftest fixes/cleanups
kselftest/arm64: Try harder to generate different keys during PAC tests
kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all()
kselftest/arm64: Corrupt P0 in the irritator when testing SSVE
kselftest/arm64: Add FPMR coverage to fp-ptrace
kselftest/arm64: Expand the set of ZA writes fp-ptrace does
kselftets/arm64: Use flag bits for features in fp-ptrace assembler code
kselftest/arm64: Enable build of PAC tests with LLVM=1
kselftest/arm64: Check that SVCR is 0 in signal handlers
kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests
kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test
kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests
kselftest/arm64: Fix build with stricter assemblers
kselftest/arm64: Test signal handler state modification in fp-stress
kselftest/arm64: Provide a SIGUSR1 handler in the kernel mode FP stress test
kselftest/arm64: Implement irritators for ZA and ZT
kselftest/arm64: Remove unused ADRs from irritator handlers
kselftest/arm64: Correct misleading comments on fp-stress irritators
kselftest/arm64: Poll less often while waiting for fp-stress children
kselftest/arm64: Increase frequency of signal delivery in fp-stress
kselftest/arm64: Fix encoding for SVE B16B16 test
...
* for-next/crc32:
: Optimise CRC32 using PMULL instructions
arm64/crc32: Implement 4-way interleave using PMULL
arm64/crc32: Reorganize bit/byte ordering macros
arm64/lib: Handle CRC-32 alternative in C code
* for-next/guest-cca:
: Support for running Linux as a guest in Arm CCA
arm64: Document Arm Confidential Compute
virt: arm-cca-guest: TSM_REPORT support for realms
arm64: Enable memory encrypt for Realms
arm64: mm: Avoid TLBI when marking pages as valid
arm64: Enforce bounce buffers for realm DMA
efi: arm64: Map Device with Prot Shared
arm64: rsi: Map unprotected MMIO as decrypted
arm64: rsi: Add support for checking whether an MMIO is protected
arm64: realm: Query IPA size from the RMM
arm64: Detect if in a realm and set RIPAS RAM
arm64: rsi: Add RSI definitions
* for-next/haft:
: Support for arm64 FEAT_HAFT
arm64: pgtable: Warn unexpected pmdp_test_and_clear_young()
arm64: Enable ARCH_HAS_NONLEAF_PMD_YOUNG
arm64: Add support for FEAT_HAFT
arm64: setup: name 'tcr2' register
arm64/sysreg: Update ID_AA64MMFR1_EL1 register
* for-next/scs:
: Dynamic shadow call stack fixes
arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux()
arm64/scs: Deal with 64-bit relative offsets in FDE frames
arm64/scs: Fix handling of DWARF augmentation data in CIE/FDE frames
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.13
1. Add iocsr and mmio bus simulation in kernel.
2. Add in-kernel interrupt controller emulation.
3. Add virt extension support for eiointc irqchip.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.13, part #1
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This call
was introduced in PSCIv1.3 as a mechanism to request hibernation,
similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested synchronous
external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
|
|
If there were no anamolies noted, then we can simply remove the log file
and return, but only after the path variable has been initialized.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20240930012757.2395-1-zhangjiao2@cmss.chinamobile.com
|
|
Add a tdc test case to exercise the just-fixed systematic leak of
IDR entries in u32 hnode disposal. Given the IDR in question is
confined to the range [1..0x7FF], it is sufficient to create/delete
the same filter 2048 times to fill it up and get a nonzero exit
status from "tc filter add".
Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20241113100428.360460-1-alexandre.ferrieux@orange.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test to make sure the backup slaves join correct multicast group
when arp_validate enabled and ns_ip6_target is set. Here is the result:
TEST: arp_validate (active-backup ns_ip6_target arp_validate 0) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 1) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 2) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 3) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 4) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 5) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 6) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
