| Age | Commit message (Collapse) | Author |
|---|
|
DEPRECATED file read
Patch series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests".
Fixup small broken window panes in DAMON selftests and kunit tests.
First four patches clean up DAMON debugfs interface selftests output, by
fixing segmentation fault of a test program (patch 1), removing
unnecessary debugging messages (patch 2), and hiding error messages from
expected failures (patches 3 and 4).
Following two patches fix copy-paste mistakes in DAMON Kconfig help
message that copied from debugfs kunit test (patch 5) and a comment on the
debugfs kunit test code (patch 6).
This patch (of 6):
'huge_count_read_write' crashes with segmentation fault when reading
DEPRECATED file of DAMON debugfs interface. This is not causing any
problem for users or other tests because the purpose of the test is just
ensuring the read is not causing kernel warning messages. Nonetheless, it
makes the output unnecessarily noisy, and the DEPRECATED file is not
properly being tested.
It happens because the size of the content of the file is larger than the
size of the buffer for the read. The file contains about 170 characters.
Increase the buffer size to 256 characters.
Link: https://lkml.kernel.org/r/20241028233058.283381-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20241028233058.283381-2-sj@kernel.org
Fixes: b4a002889d24 ("selftests/damon: test debugfs file reads/writes with huge count")
Signed-off-by: Andrew Paniakin <apanyaki@amazon.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Andrew Panyakin <apanyaki@amazon.com>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The test should be skipped if initial conditions aren't fulfilled in the
start instead of failing and outputting non-compliant TAP logs. This kind
of failure pollutes the results. The initial conditions are:
- The test should only execute if /tmp file can be allocated.
- The test should only execute if huge pages are free.
Before:
TAP version 13
1..4
Bail out! Error opening file
: Read-only file system (30)
# Planned tests != run tests (4 != 0)
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0
After:
TAP version 13
1..0 # SKIP Unable to allocate file: Read-only file system
Link: https://lkml.kernel.org/r/20241101141557.3159432-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Fixes: 3a103b5315b7 ("selftest: mm: Test if hugepage does not get leaked during __bio_release_pages()")
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 6e182dc9f268 ("selftests/mm: Use generic pkey register
manipulation") makes use of PKEY_UNRESTRICTED in
pkey_sighandler_tests. The macro has been proposed for addition to
uapi headers [1], but the patch hasn't landed yet.
Define PKEY_UNRESTRICTED in pkey-helpers.h for the time being to fix
the build.
[1] https://lore.kernel.org/all/20241028090715.509527-2-yury.khrustalev@arm.com/
Fixes: 6e182dc9f268 ("selftests/mm: Use generic pkey register manipulation")
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20241107131640.650703-1-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Close a socket with dump in progress. We need a dump which generates
enough info not to fit into a single skb. Policy dump fits the bill.
Use the trick discovered by syzbot for keeping a ref on the socket
longer than just close, with mqueue.
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN global.test_sanity ...
# OK global.test_sanity
ok 1 global.test_sanity
# RUN global.close_in_progress ...
# OK global.close_in_progress
ok 2 global.close_in_progress
# RUN global.close_with_ref ...
# OK global.close_with_ref
ok 3 global.close_with_ref
# PASSED: 3 / 3 tests passed.
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Note that this test is not expected to fail but rather crash
the kernel if we get the cleanup wrong.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241106015235.2458807-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc7).
Conflicts:
drivers/net/ethernet/freescale/enetc/enetc_pf.c
e15c5506dd39 ("net: enetc: allocate vf_state during PF probes")
3774409fd4c6 ("net: enetc: build enetc_pf_common.c as a separate module")
https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/ti/am65-cpsw-nuss.c
de794169cf17 ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7")
4a7b2ba94a59 ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently in fp-stress we test signal delivery to the test threads by
sending SIGUSR2 which simply counts how many signals are delivered. The
test programs now also all have a SIGUSR1 handler which for the threads
doing userspace testing additionally modifies the floating point register
state in the signal handler, verifying that when we return the saved
register state is restored from the signal context as expected. Switch over
to triggering that to validate that we are restoring as expected.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-6-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The other stress test programs provide a SIGUSR1 handler which modifies the
live register state in order to validate that signal context is being
restored during signal return. While we can't usefully do this when testing
kernel mode FP usage provide a handler for SIGUSR1 which just counts the
number of signals like we do for SIGUSR2, allowing fp-stress to treat all
the test programs uniformly.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-5-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we don't use the irritator signal in our floating point stress
tests so when we added ZA and ZT stress tests we didn't actually bother
implementing any actual action in the handlers, we just counted the signal
deliveries. In preparation for using the irritators let's implement them,
just trivially SMSTOP and SMSTART to reset all bits in the register to 0.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-4-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The irritator handlers for the fp-stress test programs all use ADR to load
an address into x0 which is then not referenced. Remove these ADRs as they
just cause confusion.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-2-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The comments in the handlers for the irritator signal in the test threads
for fp-stress suggest that the irritator will corrupt the register state
observed by the main thread but this is not the case, instead the FPSIMD
and SVE irritators (which are the only ones that are implemented) modify
the current register state which is expected to be overwritten on return
from the handler by the saved register state. Update the comment to reflect
what the handler is actually doing.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241107-arm64-fp-stress-irritator-v2-1-c4b9622e36ee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
While fp-stress is waiting for children to start it doesn't send any
signals to them so there is no need for it to have as short an epoll()
timeout as it does when the children are all running. We do still want to
have some timeout so that we can log diagnostics about missing children but
this can be relatively large. On emulated platforms the overhead of running
the supervisor process is quite high, especially during the process of
execing the test binaries.
Implement a longer epoll() timeout during the setup phase, using a 5s
timeout while waiting for children and switching to the signal raise
interval when all the children are started and we start sending signals.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241030-arm64-fp-stress-interval-v2-2-bd3cef48c22c@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we only deliver signals to the processes being tested about once
a second, meaning that the signal code paths are subject to relatively
little stress. Increase this frequency substantially to 25ms intervals,
along with some minor refactoring to make this more readily tuneable and
maintain the 1s logging interval. This interval was chosen based on some
experimentation with emulated platforms to avoid causing so much extra load
that the test starts to run into the 45s limit for selftests or generally
completely disconnect the timeout numbers from the
We could increase this if we moved the signal generation out of the main
supervisor thread, though we should also consider that he percentage of
time that we spend interacting with the floating point state is also a
consideration.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241030-arm64-fp-stress-interval-v2-1-bd3cef48c22c@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently the mitigation patching test errors out if the kernel is
tainted prior to the test running.
That causes the test to fail unnecessarily if some other test has caused
the kernel to be tainted, or if a proprietary or force module is loaded
for example.
Instead just warn if the kernel is tainted to begin with, and only
report a change in the taint state as an error in the test.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241106130453.1741013-5-mpe@ellerman.id.au
|
|
Fix some tests which weren't returning an error code from main.
Although these tests only ever return success, they can still fail if
they time out and the harness kills them. If that happens they still
return success to the shell, which is incorrect and confuses the higher
level error reporting.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241106130453.1741013-4-mpe@ellerman.id.au
|
|
Starting with Ubuntu 24.04, building the selftests with the big endian
compiler (which defaults to 32-bit) fails with errors:
stack_expansion_ldst.c:178:37: error: format '%lx' expects argument
of type 'long unsigned int', but argument 2 has type 'rlim_t' {aka 'long long unsigned int'}
subpage_prot.c:214:38: error: format '%lx' expects argument of type
'long unsigned int', but argument 3 has type 'off_t' {aka 'long long int'}
Prior to 24.04 rlim_t was long unsigned int, and off_t was long int.
Cast to unsigned long long and long long before passing to printf to
avoid the errors.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241106130453.1741013-3-mpe@ellerman.id.au
|
|
Each of the powerpc selftests runs with a timeout of 2 minutes by
default (see tools/testing/selftests/powerpc/harness.c).
But when tests are run with run_kselftest.sh it uses a timeout of 45
seconds, meaning some tests run OK standalone but fail when run with the
test runner.
So tell run_kselftest.sh to give each test 130 seconds, that should
allow the tests to complete, or be killed by the powerpc test harness
after 2 minutes. If for some reason the harness fails, or for the few
tests that don't use the harness, the 130 second timeout should catch
them if they get stuck.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241106130453.1741013-2-mpe@ellerman.id.au
|
|
The count_stcx_fail test runs for close to or just over 2 minutes, which
means it sometimes times out.
That's overkill for a test that just demonstrates some PMU counters
are working. Drop the 64 billion instruction case, to lower the runtime
to ~30s.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241106130453.1741013-1-mpe@ellerman.id.au
|
|
Patch series "fix error handling in mmap_region() and refactor", v3.
The mmap_region() function is somewhat terrifying, with spaghetti-like
control flow and numerous means by which issues can arise and incomplete
state, memory leaks and other unpleasantness can occur.
This series goes to great lengths to simplify how mmap_region() works and
to avoid unwinding errors late on in the process of setting up the VMA for
the new mapping, and equally avoids such operations occurring while the
VMA is in an inconsistent state.
This series builds on the previously submitted hotfix patches (see link to
v2 below) which addresses the most critical issues around mmap_region(),
and further works to improve mmap_region() complexity, stability, and
testability.
This series moves the code to mm/vma.c to render it userland testable,
refactors and simplifies it into smaller functions that are significantly
more readable.
It additionally avoids performing an attempt at a second merge mid-way
through allocating a new VMA, a dubious proposition at best and one that
is highly subject to subtle bugs.
Rather than do this, we simply note that we ought to retry the merge and
do this as a final step.
This patch (of 3):
Add some additional vma_internal.h stubs in preparation for
__mmap_region() being moved to mm/vma.c. Without these the move would
result in the tests no longer compiling.
Link: https://lkml.kernel.org/r/cover.1729858176.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/74b27e159e261d2ac1fe66a130edad1d61fdc176.1729858176.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The phys_addr_t size is predicated on whether CONFIG_PHYS_ADDR_T_64BIT is
set or not.
In the VMA tests, virt_to_phys() from tools/include/linux casts a volatile
void * pointer to phys_addr_t, if CONFIG_PHYS_ADDR_T_64BIT is not set,
this will be 32-bit and trigger a warning.
Obviously this might also lead to truncation, which we would rather avoid.
Fix this by adjusting the generation of generated/bit-length.h to generate
a CONFIG_PHYS_ADDR_T{bits}BIT define.
This does result in the generation of the useless CONFIG_PHYS_ADDR_T_32BIT
define for 32-bit systems, but this should have no effect, and makes
implementation of this easier.
This resolves the issue and the warning.
[lorenzo.stoakes@oracle.com: VMA tests not properly importing bit-length.h]
Link: https://lkml.kernel.org/r/a6183df9-3108-4d59-8128-4fc6c14e22a5@lucifer.local
Link: https://lkml.kernel.org/r/20241017165638.95602-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add some maple_tree alloc node tese case.
Link: https://lkml.kernel.org/r/20240626160631.3636515-2-Liam.Howlett@oracle.com
Signed-off-by: Jiazi Li <jqqlijiazi@gmail.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A recent refactor transformed the check for process completion
in a true statement, due to a typo.
As a result, the relevant test-case is unable to catch the
regression it was supposed to detect.
Restore the correct condition.
Fixes: 691bb4e49c98 ("selftests: net: avoid just another constant wait")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/0e6f213811f8e93a235307e683af8225cc6277ae.1730828007.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add more tests for test_txmsg_push_pop in test_sockmap for better coverage
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-6-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add push/pop checking for msg_verify_data in test_sockmap, except for
pop/push with cork tests, in these tests the logic will be different.
1. With corking, pop/push might not be invoked in each sendmsg, it makes
the layout of the received data difficult
2. It makes it hard to calculate the total_bytes in the recvmsg
Temporarily skip the data integrity test for these cases now, added a TODO
Fixes: ee9b352ce465 ("selftests/bpf: Fix msg_verify_data in test_sockmap")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-5-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
total_bytes in msg_loop_rx should also take push into account, otherwise
total_bytes will be a smaller value, which makes the msg_loop_rx end early.
Besides, total_bytes has already taken pop into account, so we don't need
to subtract some bytes from iov_buf in sendmsg_test. The additional
subtraction may make total_bytes a negative number, and msg_loop_rx will
just end without checking anything.
Fixes: 18d4e900a450 ("bpf: Selftests, improve test_sockmap total bytes counter")
Fixes: d69672147faa ("selftests, bpf: Add one test for sockmap with strparser")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-4-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
In the SENDPAGE test, "opt->iov_length * cnt" size of data will be sent
cnt times by sendfile.
1. In push/pop tests, they will be invoked cnt times, for the simplicity of
msg_verify_data, change chunk_sz to iov_length
2. Change iov_length in test_send_large from 1024 to 8192. We have pop test
where txmsg_start_pop is 4096. 4096 > 1024, an error will be returned.
Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-3-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add txmsg_pass to test_txmsg_pull/push/pop. If txmsg_pass is missing,
tx_prog will be NULL, and no program will be attached to the sockmap.
As a result, pull/push/pop are never invoked.
Fixes: 328aa08a081b ("bpf: Selftests, break down test_sockmap into subtests")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20241106222520.527076-2-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracefs fixes from Steven Rostedt:
"Fix tracefs mount options.
Commit 78ff64081949 ("vfs: Convert tracefs to use the new mount API")
broke the gid setting when set by fstab or other mount utility. It is
ignored when it is set. Fix the code so that it recognises the option
again and will honor the settings on mount at boot up.
Update the internal documentation and create a selftest to make sure
it doesn't break again in the future"
* tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/selftests: Add tracefs mount options test
tracing: Document tracefs gid mount option
tracing: Fix tracefs mount options
|
|
Stable tag for bpf-next's uprobe work.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Updated to a more recent socat release and saw this:
socat E xioopen_ipdgram_listen(): unknown address family 0
socat W address is opened in read-write mode but only supports read-only
First error is avoided via pf=ipv4 option, second one via -u
(unidirectional) mode.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20241104142821.2608-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test will fail if the initial namespace has conntrack
active due to unexpected number of flows returned on dump:
conntrack_dump_flush.c:451:test_flush_by_zone:Expected ret (7) == 2 (2)
test_flush_by_zone: Test failed
FAIL conntrack_dump_flush.test_flush_by_zone
not ok 2 conntrack_dump_flush.test_flush_by_zone
Add a wrapper that unshares this program to avoid this problem.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20241104142529.2352-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the following -Wunused-result warnings on posix_memalign()
return values and add error handling.
./shared/linux.c:100:25: warning: ignoring return value of `posix_memalign' declared with attribute `warn_unused_result' [-Wunused-result]
100 | posix_memalign(&p, cachep->align, cachep->size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../shared/linux.c: In function `kmem_cache_alloc_bulk':
../shared/linux.c:198:33: warning: ignoring return value of `posix_memalign' declared with attribute `warn_unused_result' [-Wunused-result]
198 | posix_memalign(&p[i], cachep->align,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
199 | cachep->size);
| ~~~~~~~~~~~~~
Link: https://lkml.kernel.org/r/20241011225155.27607-1-skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
By reading the code, I found these variables are never referenced in the
code. Just remove them.
Link: https://lkml.kernel.org/r/20240924021426.1980-1-bajing@cmss.chinamobile.com
Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's improve the test output. For example, print the proper test result.
Install a SIGBUS handler to catch any SIGBUS instead of crashing the test
on failure.
With unsuitable hugetlb page count:
$ ./hugetlb_fault_after_madv
TAP version 13
1..1
# [INFO] detected default hugetlb page size: 2048 KiB
ok 2 # SKIP This test needs one and only one page to execute. Got 0
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0
On a failure:
$ ./hugetlb_fault_after_madv
TAP version 13
1..1
not ok 1 SIGBUS behavior
Bail out! 1 out of 1 tests failed
On success:
$ ./hugetlb_fault_after_madv
TAP version 13
1..1
# [INFO] detected default hugetlb page size: 2048 KiB
ok 1 SIGBUS behavior
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://lkml.kernel.org/r/20240926152044.2205129-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "selftests/mm: hugetlb_fault_after_madv improvements".
Mario brought to my attention that the hugetlb_fault_after_madv test is
currently always skipped on s390x. Let's adjust the test to be
independent of the default hugetlb page size and while at it, also improve
the test output.
This patch (of 2):
We currently assume that the hugetlb page size is 2 MiB, which is why we
mmap() a 2 MiB range.
Is the default hugetlb size is larger, mmap() will fail because the range
is not suitable. If the default hugetlb size is smaller (e.g., s390x),
mmap() will fail because we would need more than one hugetlb page, but
just asserted that we have exactly one.
So let's simply use the default hugetlb page size instead of hard-coded 2
MiB, so the test isn't unconditionally skipped on architectures like
s390x.
Before this patch on s390x:
$ ./hugetlb_fault_after_madv
1..0 # SKIP Failed to allocated huge page
With this change on s390x:
$ ./hugetlb_fault_after_madv
While at it, make "huge_ptr" static.
Link: https://lkml.kernel.org/r/20240926152044.2205129-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240926152044.2205129-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Mario Casquero <mcasquer@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 6998a73efbb8 ("selftests/mm: Add new testcases for pkeys") and
commit 3a103b5315b7 ("selftest: mm: Test if hugepage does not get leaked
during __bio_release_pages()") generate test binaries hugetlb_dio,
pkey_sighandler_tests_32 and pkey_sighandler_tests_64 but did not add
these to .gitignore. Correct this.
Link: https://lkml.kernel.org/r/20240924185911.117937-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Keith Lucas <keith.lucas@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Recently, the net/lib.sh file has been modified to include defer.sh from
net/lib/sh/ directory. The Makefile from net/lib has been modified
accordingly, but not the ones from the sub-targets using net/lib.sh.
Because of that, the new file is not installed as expected when
installing the Forwarding, MPTCP, and Netfilter targets, e.g.
# make -C tools/testing/selftests TARGETS=net/mptcp install \
INSTALL_PATH=/tmp/kself
# cd /tmp/kself/
# ./run_kselftest.sh -c net/mptcp
TAP version 13
1..7
# timeout set to 1800
# selftests: net/mptcp: mptcp_connect.sh
# ./../lib.sh: line 5: /tmp/kself/net/lib/sh/defer.sh: No such file
or directory
# (...)
This can be fixed simply by adding all the .sh files from net/lib/sh
directory to the TEST_INCLUDES variable in the different Makefile's.
Fixes: a6e263f125cd ("selftests: net: lib: Introduce deferred commands")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241104-net-next-selftests-lib-sh-deps-v1-1-7c9f7d939fc2@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New netns selftest helpers netns_new() and netns_free() has been added
in network_helpers.c, let's use them in mptcp selftests too instead of
using MPTCP's own helpers create_netns() and cleanup_netns().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/c02fda3177b34f9e74a044833fda9761627f4d07.1730338692.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
As reported by Byeonguk, the bad_words test in verifier_bits_iter.c
occasionally fails on s390 host. Quoting Ilya's explanation:
s390 kernel runs in a completely separate address space, there is no
user/kernel split at TASK_SIZE. The same address may be valid in both
the kernel and the user address spaces, there is no way to tell by
looking at it. The config option related to this property is
ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE.
Also, unfortunately, 0 is a valid address in the s390 kernel address
space.
Fix the issue by using -4095 as the bad address for bits iterator, as
suggested by Ilya. Verify that bpf_iter_bits_new() returns -EINVAL for
NULL address and -EFAULT for bad address.
Fixes: ebafc1e535db ("selftests/bpf: Add three test cases for bits_iter")
Reported-by: Byeonguk Jeong <jungbu2855@gmail.com>
Closes: https://lore.kernel.org/bpf/ZycSXwjH4UTvx-Cn@ub22/
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20241105043057.3371482-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We need the char/misc/iio fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Force -march=x86-64-v2 to avoid SSE/AVX instructions if and only if the
uarch definition is supported by the compiler, e.g. gcc 7.5 only supports
x86-64.
Fixes: 9a400068a158 ("KVM: selftests: x86: Avoid using SSE/AVX instructions")
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-and-tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20241031045333.1209195-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Disable strict aliasing, as has been done in the kernel proper for decades
(literally since before git history) to fix issues where gcc will optimize
away loads in code that looks 100% correct, but is _technically_ undefined
behavior, and thus can be thrown away by the compiler.
E.g. arm64's vPMU counter access test casts a uint64_t (unsigned long)
pointer to a u64 (unsigned long long) pointer when setting PMCR.N via
u64p_replace_bits(), which gcc-13 detects and optimizes away, i.e. ignores
the result and uses the original PMCR.
The issue is most easily observed by making set_pmcr_n() noinline and
wrapping the call with printf(), e.g. sans comments, for this code:
printf("orig = %lx, next = %lx, want = %lu\n", pmcr_orig, pmcr, pmcr_n);
set_pmcr_n(&pmcr, pmcr_n);
printf("orig = %lx, next = %lx, want = %lu\n", pmcr_orig, pmcr, pmcr_n);
gcc-13 generates:
0000000000401c90 <set_pmcr_n>:
401c90: f9400002 ldr x2, [x0]
401c94: b3751022 bfi x2, x1, #11, #5
401c98: f9000002 str x2, [x0]
401c9c: d65f03c0 ret
0000000000402660 <test_create_vpmu_vm_with_pmcr_n>:
402724: aa1403e3 mov x3, x20
402728: aa1503e2 mov x2, x21
40272c: aa1603e0 mov x0, x22
402730: aa1503e1 mov x1, x21
402734: 940060ff bl 41ab30 <_IO_printf>
402738: aa1403e1 mov x1, x20
40273c: 910183e0 add x0, sp, #0x60
402740: 97fffd54 bl 401c90 <set_pmcr_n>
402744: aa1403e3 mov x3, x20
402748: aa1503e2 mov x2, x21
40274c: aa1503e1 mov x1, x21
402750: aa1603e0 mov x0, x22
402754: 940060f7 bl 41ab30 <_IO_printf>
with the value stored in [sp + 0x60] ignored by both printf() above and
in the test proper, resulting in a false failure due to vcpu_set_reg()
simply storing the original value, not the intended value.
$ ./vpmu_counter_access
Random seed: 0x6b8b4567
orig = 3040, next = 3040, want = 0
orig = 3040, next = 3040, want = 0
==== Test Assertion Failure ====
aarch64/vpmu_counter_access.c:505: pmcr_n == get_pmcr_n(pmcr)
pid=71578 tid=71578 errno=9 - Bad file descriptor
1 0x400673: run_access_test at vpmu_counter_access.c:522
2 (inlined by) main at vpmu_counter_access.c:643
3 0x4132d7: __libc_start_call_main at libc-start.o:0
4 0x413653: __libc_start_main at ??:0
5 0x40106f: _start at ??:0
Failed to update PMCR.N to 0 (received: 6)
Somewhat bizarrely, gcc-11 also exhibits the same behavior, but only if
set_pmcr_n() is marked noinline, whereas gcc-13 fails even if set_pmcr_n()
is inlined in its sole caller.
Cc: stable@vger.kernel.org
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=116912
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The loop in test_create_guest_memfd_invalid() that is supposed to test
that nothing is accepted as a valid flag to KVM_CREATE_GUEST_MEMFD was
initializing `flag` as 0 instead of BIT(0). This caused the loop to
immediately exit instead of iterating over BIT(0), BIT(1), ... .
Fixes: 8a89efd43423 ("KVM: selftests: Add basic selftest for guest_memfd()")
Signed-off-by: Patrick Roy <roypat@amazon.co.uk>
Reviewed-by: James Gowans <jgowans@amazon.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20241024095956.3668818-1-roypat@amazon.co.uk
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When memslot_perf_test is run nested, first iteration of test_memslot_rw_loop
testcase, sometimes takes more than 2 seconds due to build of shadow page tables.
Following iterations are fast.
To be on the safe side, bump the timeout to 10 seconds.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Link: https://lore.kernel.org/r/20241004220153.287459-1-mlevitsk@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The Memory Bandwidth Allocation (MBA) test iterates through all possible
MBA allocations, from 10% (ALLOCATION_MIN) to 100% (ALLOCATION_MAX) with
increments of 10% (ALLOCATION_STEP) at each iteration. During each
iteration the test measures the actual memory bandwidth NUM_OF_RUNS times
to determine the impact of MBA on actual memory bandwidth.
After the MBA test completes all the memory bandwidth measurements are
parsed into an array. One array for resctrl Memory Bandwidth Monitoring
(MBM) measurements and one array for the Integrated Memory Controller
(iMC) measurements. Each array has a hardcoded size of 1024 that is
large enough to hold the current test data, but this hardcoded value makes
the implementation difficult to understand. It will not be clear that this
array needs to be reconsidered if any of the test parameters are changed.
Replace the magic constant as array size with the test parameters the
array size depends on.
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Closes: https://lore.kernel.org/all/45af2a8c-517d-8f0d-137d-ad0f3f6a3c68@linux.intel.com/
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The resctrl selftests drop the results from every first test run
to avoid (per comment) "inaccurate due to monitoring setup transition
phase" data. Previously inaccurate data resulted from workloads needing
some time to "settle" and also the measurements themselves to
account for earlier measurements to measure across needed timeframe.
commit da50de0a92f3 ("selftests/resctrl: Calculate resctrl FS derived mem
bw over sleep(1) only")
ensured that measurements accurately measure just the time frame of
interest. The default "fill_buf" benchmark since separated the buffer
prepare phase from the benchmark run phase reducing the need for the
tests themselves to accommodate the benchmark's "settle" time.
With these enhancements there are no remaining portions needing
to "settle" and the first test run can contribute to measurements.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
bandwidth
The MBA test incrementally throttles memory bandwidth, each time
followed by a comparison between the memory bandwidth observed
by the performance counters and resctrl respectively.
While a comparison between performance counters and resctrl is
generally appropriate, they do not have an identical view of
memory bandwidth. For example RAS features or memory performance
features that generate memory traffic may drive accesses that are
counted differently by performance counters and MBM respectively,
for instance generating "overhead" traffic which is not counted
against any specific RMID. As a ratio, this different view of memory
bandwidth becomes more apparent at low memory bandwidths.
It is not practical to enable/disable the various features that
may generate memory bandwidth to give performance counters and
resctrl an identical view. Instead, do not compare performance
counters and resctrl view of memory bandwidth when the memory
bandwidth is low.
Bandwidth throttling behaves differently across platforms
so it is not appropriate to drop measurement data simply based
on the throttling level. Instead, use a threshold of 750MiB
that has been observed to support adequate comparison between
performance counters and resctrl.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
By default the MBM and MBA tests use the "fill_buf" benchmark to
read from a buffer with the goal to measure the memory bandwidth
generated by this buffer access.
Care should be taken when sizing the buffer used by the "fill_buf"
benchmark. If the buffer is small enough to fit in the cache then
it cannot be expected that the benchmark will generate much memory
bandwidth. For example, on a system with 320MB L3 cache the existing
hardcoded default of 250MB is insufficient.
Use the measured cache size to determine a buffer size that can be
expected to trigger memory access while keeping the existing default
as minimum, now renamed to MINIMUM_SPAN, that has been appropriate for
testing so far.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The CMT, MBA, and MBM tests rely on the resctrl_val() wrapper to
start and run a benchmark while providing test specific flows
via callbacks to do test specific configuration and measurements.
At a high level, the resctrl_val() flow is:
a) Start by fork()ing a child process that installs a signal
handler for SIGUSR1 that, on receipt of SIGUSR1, will
start running a benchmark.
b) Assign the child process created in (a) to the resctrl
control and monitoring group that dictates the memory and
cache allocations with which the process can run and will
contain all resctrl monitoring data of that process.
c) Once parent and child are considered "ready" (determined via
a message over a pipe) the parent signals the child (via
SIGUSR1) to start the benchmark, waits one second for the
benchmark to run, and then starts collecting monitoring data
for the tests, potentially also changing allocation
configuration depending on the various test callbacks.
A problem with the above flow is the "black box" view of the
benchmark that is combined with an arbitrarily chosen
"wait one second" before measurements start. No matter what
the benchmark does, it is given one second to initialize before
measurements start.
The default benchmark "fill_buf" consists of two parts,
first it prepares a buffer (allocate, initialize, then flush), then it
reads from the buffer (in unpredictable ways) until terminated.
Depending on the system and the size of the buffer, the first "prepare"
part may not be complete by the time the one second delay expires. Test
measurements may thus start before the work needing to be measured runs.
Split the default benchmark into its "prepare" and "runtime" parts and
simplify the resctrl_val() wrapper while doing so. This same split
cannot be done for the user provided benchmark (without a user
interface change), so the current behavior is maintained for user
provided benchmark.
Assign the test itself to the control and monitoring group and run the
"prepare" part of the benchmark in this context, ensuring it runs with
required cache and memory bandwidth allocations. With the benchmark
preparation complete it is only needed to fork() the "runtime" part
of the benchmark (or entire user provided benchmark).
Keep the "wait one second" delay before measurements start. For the
default "fill_buf" benchmark this time now covers only the "runtime"
portion that needs to be measured. For the user provided benchmark this
delay maintains current behavior.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The benchmark used during the CMT, MBM, and MBA tests can be provided by
the user via (-b) parameter, if not provided the default "fill_buf"
benchmark is used. The user is additionally able to override
any of the "fill_buf" default parameters when running the tests with
"-b fill_buf <fill_buf parameters>".
The "fill_buf" parameters are managed as an array of strings. Using an
array of strings is complex because it requires transformations to/from
strings at every producer and consumer. This is made worse for the
individual tests where the default benchmark parameters values may not
be appropriate and additional data wrangling is required. For example,
the CMT test duplicates the entire array of strings in order to replace
one of the parameters.
More issues appear when combining the usage of an array of strings with
the use case of user overriding default parameters by specifying
"-b fill_buf <parameters>". This use case is fragile with opportunities
to trigger a SIGSEGV because of opportunities for NULL pointers to exist
in the array of strings. For example, by running below (thus by specifying
"fill_buf" should be used but all parameters are NULL):
$ sudo resctrl_tests -t mbm -b fill_buf
Replace the "array of strings" parameters used for "fill_buf" with
new struct fill_buf_param that contains the "fill_buf" parameters that
can be used directly without transformations to/from strings. Two
instances of struct fill_buf_param may exist at any point in time:
* If the user provides new parameters to "fill_buf", the
user parameter structure (struct user_params) will point to a
fully initialized and immutable struct fill_buf_param
containing the user provided parameters.
* If "fill_buf" is the benchmark that should be used by a test,
then the test parameter structure (struct resctrl_val_param)
will point to a fully initialized struct fill_buf_param. The
latter may contain (a) the user provided parameters verbatim,
(b) user provided parameters adjusted to be appropriate for
the test, or (c) the default parameters for "fill_buf" that
is appropriate for the test if the user did not provide
"fill_buf" parameters nor an alternate benchmark.
The existing behavior of CMT test is to use test defined value for the
buffer size even if the user provides another value via command line.
This behavior is maintained since the test requires that the buffer size
matches the size of the cache allocated, and the amount of cache
allocated can instead be changed by the user with the "-n" command line
parameter.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The MBM and MBA resctrl selftests run a benchmark during which
it takes measurements of read memory bandwidth via perf.
Code exists to support measurements of write memory bandwidth
but there exists no path with which this code can execute.
While code exists for write memory bandwidth measurement
there has not yet been a use case for it. Remove this unused code.
Rename relevant functions to include "read" so that it is clear
that it relates only to memory bandwidth reads, while renaming
the functions also add consistency by changing the "membw"
instances to more prevalent "mem_bw".
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
