| Age | Commit message (Collapse) | Author |
|---|
|
It will be used by the vDSO selftests.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-7-28e14e031ed8@linutronix.de
|
|
Pull for-6.14-fixes to receive:
9360dfe4cbd6 ("sched_ext: Validate prev_cpu in scx_bpf_select_cpu_dfl()")
which conflicts with:
337d1b354a29 ("sched_ext: Move built-in idle CPU selection policy to a separate file")
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Print out the index of mismatching XSAVE bytes using unsigned decimal
format. Some versions of clang complain about trying to print an integer
as an unsigned char.
x86/sev_smoke_test.c:55:51: error: format specifies type 'unsigned char'
but the argument has type 'int' [-Werror,-Wformat]
Fixes: 8c53183dbaa2 ("selftests: kvm: add test for transferring FPU state into VMSA")
Link: https://lore.kernel.org/r/20250228233852.3855676-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
During the initial mprotect(RO) stage of mmu_stress_test, keep vCPUs
spinning until all vCPUs have hit -EFAULT, i.e. until all vCPUs have tried
to write to a read-only page. If a vCPU manages to complete an entire
iteration of the loop without hitting a read-only page, *and* the vCPU
observes mprotect_ro_done before starting a second iteration, then the
vCPU will prematurely fall through to GUEST_SYNC(3) (on x86 and arm64) and
get out of sequence.
Replace the "do-while (!r)" loop around the associated _vcpu_run() with
a single invocation, as barring a KVM bug, the vCPU is guaranteed to hit
-EFAULT, and retrying on success is super confusion, hides KVM bugs, and
complicates this fix. The do-while loop was semi-unintentionally added
specifically to fudge around a KVM x86 bug, and said bug is unhittable
without modifying the test to force x86 down the !(x86||arm64) path.
On x86, if forced emulation is enabled, vcpu_arch_put_guest() may trigger
emulation of the store to memory. Due a (very, very) longstanding bug in
KVM x86's emulator, emulate writes to guest memory that fail during
__kvm_write_guest_page() unconditionally return KVM_EXIT_MMIO. While that
is desirable in the !memslot case, it's wrong in this case as the failure
happens due to __copy_to_user() hitting a read-only page, not an emulated
MMIO region.
But as above, x86 only uses vcpu_arch_put_guest() if the __x86_64__ guards
are clobbered to force x86 down the common path, and of course the
unexpected MMIO is a KVM bug, i.e. *should* cause a test failure.
Fixes: b6c304aec648 ("KVM: selftests: Verify KVM correctly handles mprotect(PROT_READ)")
Reported-by: Yan Zhao <yan.y.zhao@intel.com>
Closes: https://lore.kernel.org/all/20250208105318.16861-1-yan.y.zhao@intel.com
Debugged-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20250228230804.3845860-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
ARRAY_SIZE()
Coccinelle gives WARNING recommending the use of ARRAY_SIZE() macro definition
to improve the code readability:
./tools/testing/selftests/x86/syscall_numbering.c:316:35-36: WARNING: Use ARRAY_SIZE
Fixes: 15c82d98a0f78 ("selftests/x86/syscall: Update and extend syscall_numbering_64")
Signed-off-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20241101111523.1293193-2-mtodorovac69@gmail.com
|
|
While nolibc does support ARM Thumb instructions,
that support was not tested specifically.
Add a new test configuration for it.
Tested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250301-nolibc-armthumb-v1-2-d1f04abb5f6d@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
The default could also be -mthumb.
Explicitly use -marm to keep everything predictable.
Tested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250301-nolibc-armthumb-v1-1-d1f04abb5f6d@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Fix an objtool false positive, and objtool related build warnings that
happens on PIE-enabled architectures such as LoongArch"
* tag 'objtool-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add bch2_trans_unlocked_or_in_restart_error() to bcachefs noreturns
objtool: Fix C jump table annotations for Clang
vmlinux.lds: Ensure that const vars with relocations are mapped R/O
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry in a
link list that gets freed. Then when a new entry is added it can
cause a u-a-f bug. This is fixed by restructuring the code so that
the histogram is consistent on failure and everything is cleaned up
appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now does
so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly. It
counts the functions in the file, but if there's already functions in
the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of the
function times can overflow. If the overflow happens to land on zero,
that can cause a division by zero. Check for zero from the
calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly. For
now, just prevent the system from crashing.
* tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Avoid potential division by zero in function_stat_show()
selftests/ftrace: Let fprobe test consider already enabled functions
tracing: Fix bad hist from corrupting named_triggers list
|
|
If the CPU supports Idle HLT, which elides HLT VM-Exits if the vCPU has an
unmasked pending IRQ or NMI, relax the xAPIC IPI test's assertion on the
number of HLT exits to only require that the number of exits is less than
or equal to the number of HLT instructions that were executed. I.e. don't
fail the test if Idle HLT does what it's supposed to do.
Note, unfortunately there's no way to determine if *KVM* supports Idle HLT,
as this_cpu_has() checks raw CPU support, and kvm_cpu_has() checks what can
be exposed to L1, i.e. the latter would check if KVM supports nested Idle
HLT. But, since the assert is purely bonus coverage, checking for CPU
support is good enough.
Cc: Manali Shukla <Manali.Shukla@amd.com>
Tested-by: Manali Shukla <Manali.Shukla@amd.com>
Link: https://lore.kernel.org/r/20250226231809.3183093-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add an L1 (guest) assert to the nested exceptions test to verify that KVM
doesn't put VMRUN in an STI shadow (AMD CPUs bleed the shadow into the
guest's int_state if a #VMEXIT occurs before VMRUN fully completes).
Add a similar assert to the VMX side as well, because why not.
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250224165442.2338294-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
There is a spelling mistake in a PER_PAGE_DEBUG debug message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250227220819.656780-1-colin.i.king@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Enable zero copy on file backed target, meantime add one fio test for
covering write verify, another test for mkfs/mount/umount.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228161919.2869102-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add file backed ublk target code, meantime add one fio test for
covering write verify, another test for mkfs/mount/umount.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228161919.2869102-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Both ublk driver and userspace heavily depends on io_uring subsystem,
and tools/testing/selftests/ should be the best place for holding this
cross-subsystem tests.
Add basic read/write IO test over this ublk null disk, and make sure ublk
working.
More tests will be added.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228161919.2869102-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace X86_CMPXCHG64 with X86_CX8, as CX8 is the name of the CPUID
flag, thus to make it consistent with X86_FEATURE_CX8 defined in
<asm/cpufeatures.h>.
No functional change intended.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250228082338.73859-2-xin@zytor.com
|
|
GRO tests are timing dependent and can easily flake. This is partially
mitigated in gro.sh by giving each subtest 3 chances to pass. However,
this still flakes on some machines. Reduce the flakiness by:
- Bumping retries to 6.
- Setting napi_defer_hard_irqs to 1 to reduce the chance that GRO is
flushed prematurely. This also lets us reduce the gro_flush_timeout
from 1ms to 100us.
Tested: Ran `gro.sh -t large` 1000 times. There were no failures with
this change. Ran inside strace to increase flakiness.
Signed-off-by: Kevin Krakauer <krakauer@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250226192725.621969-4-krakauer@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gro.c:main no longer erroneously claims a test passes when running as a
sender.
Tested: Ran `gro.sh -t large` to verify the sender no longer prints a
status.
Signed-off-by: Kevin Krakauer <krakauer@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250226192725.621969-3-krakauer@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Modify gro.sh to return a useful exit code when the -t flag is used. It
formerly returned 0 no matter what.
Tested: Ran `gro.sh -t large` and verified that test failures return 1.
Signed-off-by: Kevin Krakauer <krakauer@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250226192725.621969-2-krakauer@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fprobe test fails on Fedora 41 since the fprobe test assumption that
the number of enabled_functions is zero before the test starts is not
necessarily true. Some user space tools, like systemd, add BPF programs
that attach to functions. Those will show up in the enabled_functions table
and must be taken into account by the fprobe test.
Therefore count the number of lines of enabled_functions before tests
start, and use that as base when comparing expected results.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250226142703.910860-1-hca@linux.ibm.com
Fixes: e85c5e9792b9 ("selftests/ftrace: Update fprobe test to check enabled_functions file")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc5).
Conflicts:
drivers/net/ethernet/cadence/macb_main.c
fa52f15c745c ("net: cadence: macb: Synchronize stats calculations")
75696dd0fd72 ("net: cadence: macb: Convert to get_stats64")
https://lore.kernel.org/20250224125848.68ee63e5@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/intel/ice/ice_sriov.c
79990cf5e7ad ("ice: Fix deinitializing VF in error path")
a203163274a4 ("ice: simplify VF MSI-X managing")
net/ipv4/tcp.c
18912c520674 ("tcp: devmem: don't write truncated dmabuf CMSGs to userspace")
297d389e9e5b ("net: prefix devmem specific helpers")
net/mptcp/subflow.c
8668860b0ad3 ("mptcp: reset when MPTCP opts are dropped after join")
c3349a22c200 ("mptcp: consolidate subflow cleanup")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes. The only slightly large change is for ASoC
Cirrus codec, but that's still in a normal range. All the rest are
small device-specific fixes and should be fairly safe to take"
* tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix microphone regression on ASUS N705UD
ALSA: hda/realtek: Fix wrong mic setup for ASUS VivoBook 15
ASoC: cs35l56: Prevent races when soft-resetting using SPI control
firmware: cs_dsp: Remove async regmap writes
ASoC: Intel: sof_sdw: warn both sdw and pch dmic are used
ASoC: SOF: Intel: don't check number of sdw links when set dmic_fixup
ASoC: dapm-graph: set fill colour of turned on nodes
ASoC: fsl: Rename stream name of SAI DAI driver
ASoC: es8328: fix route from DAC to output
ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-900NXS2
ASoC: tas2764: Set the SDOUT polarity correctly
ASoC: tas2764: Fix power control mask
ALSA: usb-audio: Avoid dropping MIDI events at closing multiple ports
ASoC: tas2770: Fix volume scale
|
|
Introduce __COMPAT_scx_bpf_events() to use scx_bpf_events() in a
compatible way also with kernels that don't provide this kfunc.
This also fixes the following error with scx_qmap when running on a
kernel that does not provide scx_bpf_events():
; scx_bpf_events(&events, sizeof(events)); @ scx_qmap.bpf.c:777
318: (b7) r2 = 72 ; R2_w=72 async_cb
319: <invalid kfunc call>
kfunc 'scx_bpf_events' is referenced but wasn't resolved
Fixes: 9865f31d852a4 ("sched_ext: Add scx_bpf_events() and scx_read_event() for BPF schedulers")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Some drivers, like tg3, do not set combined-count:
$ ethtool -l enp4s0f1
Channel parameters for enp4s0f1:
Pre-set maximums:
RX: 4
TX: 4
Other: n/a
Combined: n/a
Current hardware settings:
RX: 4
TX: 1
Other: n/a
Combined: n/a
In the case where combined-count is not set, the ethtool netlink code
in the kernel elides the value and the code in the test:
netnl.channels_get(...)
With a tg3 device, the returned dictionary looks like:
{'header': {'dev-index': 3, 'dev-name': 'enp4s0f1'},
'rx-max': 4,
'rx-count': 4,
'tx-max': 4,
'tx-count': 1}
Note that the key 'combined-count' is missing. As a result of this
missing key the test raises an exception:
# Exception| if channels['combined-count'] == 0:
# Exception| ~~~~~~~~^^^^^^^^^^^^^^^^^^
# Exception| KeyError: 'combined-count'
Change the test to check if 'combined-count' is a key in the dictionary
first and if not assume that this means the driver has separate RX and
TX queues.
With this change, the test now passes successfully on tg3 and mlx5
(which does have a 'combined-count').
Fixes: 1cf270424218 ("net: selftest: add test for netdev netlink queue-get API")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250226181957.212189-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are going to apply a new series that conflicts with pending
work in x86/mm, so merge in x86/mm to avoid it, and also to
refresh the x86/cpu branch with fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
X86_FEATURE_USE_IBPB was introduced in:
2961298efe1e ("x86/cpufeatures: Clean up Spectre v2 related CPUID flags")
to have separate flags for when the CPU supports IBPB (i.e. X86_FEATURE_IBPB)
and when an IBPB is actually used to mitigate Spectre v2.
Ever since then, the uses of IBPB expanded. The name became confusing
because it does not control all IBPB executions in the kernel.
Furthermore, because its name is generic and it's buried within
indirect_branch_prediction_barrier(), it's easy to use it not knowing
that it is specific to Spectre v2.
X86_FEATURE_USE_IBPB is no longer needed because all the IBPB executions
it used to control are now controlled through other means (e.g.
switch_mm_*_ibpb static branches).
Remove the unused feature bit.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20250227012712.3193063-7-yosry.ahmed@linux.dev
|
|
There is a spelling mistake in a sig_print() message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250227091533.599213-1-colin.i.king@gmail.com
|
|
Change wording of test number recommendation to "the recommended number
of times".
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Add tests to check that the napi retained the IRQ after down/up,
multiple changes in the number of rx queues and after
attaching/releasing XDP program.
Tested on ice and idpf:
# NETIF=<iface> tools/testing/selftests/drivers/net/hw/irq.py
KTAP version 1
1..4
ok 1 irq.check_irqs_reported
ok 2 irq.check_reconfig_queues
ok 3 irq.check_reconfig_xdp
ok 4 irq.check_down
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Tested-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-7-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expand IPV6_TCLASS to also cover IP_TOS.
Expand IPV6_HOPLIMIT to also cover IP_TTL.
Expand csmg_sender.c to allow setting IPv4 setsockopts.
Also rename struct v6 to cmsg to match its expanded scope.
Don't bother updating all occurrences of tclass and hoplimit.
Rename cmsg_ipv6.sh to cmsg_ip.sh to match the expanded scope.
Be careful around the subtle API difference between TCLASS and TOS.
IP_TOS includes ECN bits. Add a test to verify that these are masked
when making routing decisions.
Diff is more concise with --word-diff
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250225022431.2083926-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move IPV6_TCLASS and IPV6_HOPLIMIT into loops, to be able to use them
for IP_TOS and IP_TTL in a follow-on patch.
Indentation in this file is a mix of four spaces and tabs for double
indents. To minimize code churn, maintain that pattern.
Very small diff if viewing with -w.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250225022431.2083926-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
One difference here with other pseudo-firmware bitmap registers
is that the default/reset value for the supported hypercall
function-ids is 0 at present. Hence, modify the test accordingly.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250221140229.12588-7-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
This reverts commit 16767502aa990cca2cb7d1372b31d328c4c85b40.
Nolibc gained support for uname(2) and sscanf(3) which are the
dependencies of ksft_min_kernel_version().
So re-enable support for ksft_min_kernel_version() under nolibc.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250209-nolibc-scanf-v2-2-c29dea32f1cd@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
These functions are used often, also in selftests.
sscanf() itself is also used by kselftest.h itself.
The implementation is limited and only supports numeric arguments.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250209-nolibc-scanf-v2-1-c29dea32f1cd@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
The uprobe events test fails on s390, but also on x86 (Fedora 41). The
problem appears to be that there is an assumption that adding a uprobe to
the beginning of the executable mapping of /bin/sh is sufficient to trigger
a uprobe event when /bin/sh is executed.
This assumption is not necessarily true. Therefore use "readelf -h" to find
the entry point address of /bin/sh and use this address when adding the
uprobe event.
This adds a dependency to readelf which is not always installed. Therefore
add a check and exit with exit_unresolved if it is not installed.
Link: https://lore.kernel.org/r/20250220130102.2079179-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"Fixes to TCP socket identification, documentation, and tests"
* tag 'landlock-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add binaries to .gitignore
selftests/landlock: Test that MPTCP actions are not restricted
selftests/landlock: Test TCP accesses with protocol=IPPROTO_TCP
landlock: Fix non-TCP sockets restriction
landlock: Minor typo and grammar fixes in IPC scoping documentation
landlock: Fix grammar error
selftests/landlock: Enable the new CONFIG_AF_UNIX_OOB
|
|
Add a selftest to validate the behavior of the NUMA-aware scheduler
functionalities, including idle CPU selection within nodes, per-node
DSQs and CPU to node mapping.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add support for 'bla' instruction.
This is done by 'flagging' the address as an absolute address so that
arch_jump_destination() can calculate it as expected. Because code is
_always_ 4 bytes aligned, use bit 30 as flag.
Also add support for 'b' and 'ba' instructions. Objtool call them jumps.
And make sure the special 'bl .+4' used by clang in relocatable code is
not seen as an 'unannotated intra-function call'. clang should use the
special 'bcl 20,31,.+4' form like gcc but for the time being it does not
so lets work around that.
Link: https://github.com/llvm/llvm-project/issues/128644
Reviewed-by: Segher Boessenkool <segher@kewrnel.crashing.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/bf0b4d554547bc34fa3d1af5b4e62a84c0bc182b.1740470510.git.christophe.leroy@csgroup.eu
|
|
Add xstate testing specifically for those vector register states,
validating kernel's context switching and ensuring ABI compliance.
Use the established xstate testing framework.
Alternatively, this invocation could be placed directly in
xstate.c::main(). However, the current test file naming convention, which
clearly specifies the tested area, seems reasonable. Adding avx.c
considerably aligns with that convention.
The test output should be like this for ZMM_Hi256 as an example:
$ avx_64
...
[RUN] AVX-512 ZMM_Hi256: check context switches, 10 iterations, 5 threads.
[OK] No incorrect case was found.
[RUN] AVX-512 ZMM_Hi256: inject xstate via ptrace().
[OK] 'xfeatures' in SW reserved area was correctly written
[OK] xstate was correctly updated.
[RUN] AVX-512 ZMM_Hi256: load xstate and raise SIGUSR1
[OK] 'magic1' is valid
[OK] 'xfeatures' in SW reserved area is valid
[OK] 'xfeatures' in XSAVE header is valid
[OK] xstate delivery was successful
[OK] 'magic2' is valid
[RUN] AVX-512 ZMM_Hi256: load new xstate from sighandler and check it after sigreturn
[OK] xstate was restored correctly
But systems without AVX-512 will look like:
...
The kernel does not support feature number: 5
The kernel does not support feature number: 6
The kernel does not support feature number: 7
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-10-chang.seok.bae@intel.com
|
|
The established xstate test code is designed to be generic, but certain
xstates require special handling and cannot be tested without additional
adjustments.
Clarify which xstates are currently supported, and enforce testing only
for them.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-9-chang.seok.bae@intel.com
|
|
Currently, each of the three xstate tests runs as a separate invocation,
requiring the xstate number to be passed and state information to be
reconstructed repeatedly. This approach arose from their individual and
isolated development, but now it makes sense to unify them.
Introduce a wrapper function that first verifies feature availability
from the kernel and constructs the necessary state information once. The
wrapper then sequentially invokes all tests to ensure consistent
execution.
Update the AMX test to use this unified invocation.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-8-chang.seok.bae@intel.com
|
|
With the refactored test cases, another xstate exposure to userspace is
through signal delivery. While amx.c includes signal-related scenarios,
its primary focus is on xstate permission management, which is largely
specific to dynamic states.
The remaining gap is testing xstate preservation and restoration across
signal delivery. The kernel defines an ABI for presenting xstate in the
signal frame, closely resembling the hardware XSAVE format, where xstate
modification is also possible.
Introduce a new test case to verify xstate preservation across signal
delivery and return, that is ensuring ABI compatibility by:
- Loading xstate before raising a signal.
- Verifying correct exposure in the signal frame
- Modifying xstate in the signal frame before returning.
- Checking the state restoration upon signal return.
Integrate this test into the AMX test suite as an initial usage site.
Expected output:
$ amx_64
...
[RUN] AMX Tile data: load xstate and raise SIGUSR1
[OK] 'magic1' is valid
[OK] 'xfeatures' in SW reserved area is valid
[OK] 'xfeatures' in XSAVE header is valid
[OK] xstate delivery was successful
[OK] 'magic2' is valid
[RUN] AMX Tile data: load new xstate from sighandler and check it after sigreturn
[OK] xstate was restored correctly
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-7-chang.seok.bae@intel.com
|
|
Following the refactoring of the context switching test, the ptrace test is
another component reusable for other xstate features. As part of this
restructuring, add a missing check to validate the
user_xstateregs->xstate_fx_sw field in the ABI.
Also, replace err() and fatal_error() with ksft_exit_fail_msg() for
consistency in error handling.
Expected output:
$ amx_64
...
[RUN] AMX Tile data: inject xstate via ptrace().
[OK] 'xfeatures' in SW reserved area was correctly written
[OK] xstate was correctly updated.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-6-chang.seok.bae@intel.com
|
|
The existing context switching and ptrace tests in amx.c are not specific
to dynamic states, making them reusable for general xstate testing.
As a first step, move the context switching test to xstate.c. Refactor
the test code to allow specifying which xstate component being tested.
To decouple the test from dynamic states, remove the permission request
code. In fact, The permission request inside the test wrapper was
redundant.
Additionally, replace fatal_error() with ksft_exit_fail_msg() for
consistency in error handling.
Expected output:
$ amx_64
...
[RUN] AMX Tile data: check context switches, 10 iterations, 5 threads.
[OK] No incorrect case was found.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-5-chang.seok.bae@intel.com
|
|
After moving essential helpers from amx.c, the code remains neutral
regarding which xstate components it handles. However, explicitly listing
known components helps users identify which features are ready for
testing.
Enumerate xstate components to facilitate identification. Extend struct
xstate_info to include a name field, providing a human-readable
identifier.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-4-chang.seok.bae@intel.com
|
|
The AMX test introduced several XSAVE-related helper functions, but so
far, it has been the only user of them. These helpers can be generalized
for broader test of multiple xstate features.
Move most XSAVE-related code into xsave.h, making it shareable. The
restructuring includes:
* Establishing low-level XSAVE helpers for saving and restoring register
states, as well as handling XSAVE buffers.
* Generalizing state data manipuldations: set_rand_data()
* Introducing a generic feature query helper: get_xstate_info()
While doing so, remove unused defines in amx.c.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-3-chang.seok.bae@intel.com
|
|
The x86 selftests frequently register and clean up signal handlers, but
the sethandler() and clearhandler() functions have been redundantly
copied across multiple .c files.
Move these functions to helpers.h to enable reuse across tests,
eliminating around 250 lines of duplicate code.
Converge the error handling by using ksft_exit_fail_msg(), which is
functionally equivalent with err() within the selftest framework.
This change is a prerequisite for the upcoming xstate selftest, which
requires signal handling for registering and cleaning up handlers.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-2-chang.seok.bae@intel.com
|
|
Assert that MIDR_EL1, REVIDR_EL1, AIDR_EL1 are writable from userspace,
that the changed values are visible to guests, and that they are
preserved across a vCPU reset.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250225005401.679536-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
