| Age | Commit message (Collapse) | Author |
|---|
|
Enable the already existing metadata copy test to also run in
multi-buffer mode with 9K packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-23-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a test that produces lots of nasty descriptors testing the corner
cases of the descriptor validation. Some of these descriptors are
valid and some are not as indicated by the valid flag. For a
description of all the test combinations, please see the code.
To stress the API, we need to be able to generate combinations of
descriptors that make little sense. A new verbatim mode is introduced
for the packet_stream to accomplish this. In this mode, all packets in
the packet_stream are sent as is. We do not try to chop them up into
frames that are of the right size that we know are going to work as we
would normally do. The packets are just written into the Tx ring even
if we know they make no sense.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # adjusted valid flags for frags
Link: https://lore.kernel.org/r/20230719132421.584801-22-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a test for multi-buffer AF_XDP when using unaligned mode. The test
sends 4096 9K-buffers.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-21-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the first basic multi-buffer test that sends a stream of 9K
packets and validates that they are received at the other end. In
order to enable sending and receiving multi-buffer packets, code that
sets the MTU is introduced as well as modifications to the XDP
programs so that they signal that they are multi-buffer enabled.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-20-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the ability to send and receive packets that are larger than the
size of a umem frame, using the AF_XDP /XDP multi-buffer
support. There are three pieces of code that need to be changed to
achieve this: the Rx path, the Tx path, and the validation logic.
Both the Rx path and Tx could only deal with a single fragment per
packet. The Tx path is extended with a new function called
pkt_nb_frags() that can be used to retrieve the number of fragments a
packet will consume. We then create these many fragments in a loop and
fill the N-1 first ones to the max size limit to use the buffer space
efficiently, and the Nth one with whatever data that is left. This
goes on until we have filled in at the most BATCH_SIZE worth of
descriptors and fragments. If we detect that the next packet would
lead to BATCH_SIZE number of fragments sent being exceeded, we do not
send this packet and finish the batch. This packet is instead sent in
the next iteration of BATCH_SIZE fragments.
For Rx, we loop over all fragments we receive as usual, but for every
descriptor that we receive we call a new validation function called
is_frag_valid() to validate the consistency of this fragment. The code
then checks if the packet continues in the next frame. If so, it loops
over the next packet and performs the same validation. once we have
received the last fragment of the packet we also call the function
is_pkt_valid() to validate the packet as a whole. If we get to the end
of the batch and we are not at the end of the current packet, we back
out the partial packet and end the loop. Once we get into the receive
loop next time, we start over from the beginning of that packet. This
so the code becomes simpler at the cost of some performance.
The validation function is_frag_valid() checks that the sequence and
packet numbers are correct at the start and end of each fragment.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-19-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce new netlink attribute NETDEV_A_DEV_XDP_ZC_MAX_SEGS that will
carry maximum fragments that underlying ZC driver is able to handle on
TX side. It is going to be included in netlink response only when driver
supports ZC. Any value higher than 1 implies multi-buffer ZC support on
underlying device.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-11-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Register the bpf_map_sum_elem_count func for all programs, and update the
map_ptr subtest of the test_progs test to test the new functionality.
The usage is allowed as long as the pointer to the map is trusted (when
using tracing programs) or is a const pointer to map, as in the following
example:
struct {
__uint(type, BPF_MAP_TYPE_HASH);
...
} hash SEC(".maps");
...
static inline int some_bpf_prog(void)
{
struct bpf_map *map = (struct bpf_map *)&hash;
__s64 count;
count = bpf_map_sum_elem_count(map);
...
}
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/r/20230719092952.41202-5-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
It was forgotten to add the new binary to .gitignore. Let's fix it.
Fixes: 10b98a4db11a ("selftests: ALSA: Add test for the 'pcmtest' driver")
Link: https://lore.kernel.org/r/20230719114336.18409-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in userspace_pm.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in mptcp_sockopt.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in simult_flows.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in diag.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in mptcp_join.sh selftest.
In this selftest and before starting each subtest, the 'reset' function
is called. We can then check if the previous test has passed, failed or
has been skipped from there.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in pm_netlink.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in mptcp_connect.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch adds some helpers in mptcp_lib.sh to be able to easily format
subtests results in TAP in the different MPTCP selftests.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In this selftest, "printf" is always used with "stdbuf".
With a new helper, it is possible to call "stdbuf" only from one place.
This makes the code a bit clearer to read.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are a few reasons to do that:
- When the tabs are not printed as 8 spaces, some results were not
properly aligned
- Some lines printing the test name were very long due to the use of a
lot of spaces/tabs at the end and stdbuf at the beginning.
- To reduce duplicated code, e.g. to print what has failed and set the
status
But by centralising how the test results are printed, this also prepares
future commits to avoid more duplicated code and ease the tracking of
the different subtests.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
shellcheck recently helped to find an issue where a wrong variable name
was used. It is then good to fix the other harmless issues in order to
spot "real" ones later.
Here, three categories of warnings are ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoke indirectly via the EXIT trap.
- SC2034: Variable appears unused. The check_expected_one() function
takes the name of the variable in argument but it ends up reading the
content: indirect usage.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
One error has been fixed with SC2181: Check exit code directly with e.g.
'if ! mycmd;', not indirectly with $?.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No more tests were executed after a failure but it is still interesting
to get results for all the tests to better understand what's still OK
and what's not after a modification.
Now we only exit earlier if the two connections cannot be established.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No more tests were executed after a failure but it is still interesting
to get results for all the tests to better understand what's still OK
and what's not after a modification.
Now we only exit earlier if the basic tests are failing: no ping going
through namespaces or unable to transfer data on the loopback interface.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add test cases for bridge backup port and backup nexthop ID, testing
both good and bad flows.
Example truncated output:
# ./test_bridge_backup_port.sh
[...]
Tests passed: 83
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
fixes coccinelle WARNING: Use ARRAY_SIZE
Signed-off-by: Mahmoud Maatuq <mahmoudmatook.mm@gmail.com>
Link: https://lore.kernel.org/r/20230716184349.2124858-1-mahmoudmatook.mm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The test added in previous patch will fail with bpf_refcount_acquire
disabled. Until all races are fixed and bpf_refcount_acquire is
re-enabled on bpf-next, disable the test so CI doesn't complain.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230718083813.3416104-6-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch adds a runnable version of one of the races described by
Kumar in [0]. Specifically, this interleaving:
(rbtree1 and list head protected by lock1, rbtree2 protected by lock2)
Prog A Prog B
======================================
n = bpf_obj_new(...)
m = bpf_refcount_acquire(n)
kptr_xchg(map, m)
m = kptr_xchg(map, NULL)
lock(lock2)
bpf_rbtree_add(rbtree2, m->r, less)
unlock(lock2)
lock(lock1)
bpf_list_push_back(head, n->l)
/* make n non-owning ref */
bpf_rbtree_remove(rbtree1, n->r)
unlock(lock1)
The above interleaving, the node's struct bpf_rb_node *r can be used to
add it to either rbtree1 or rbtree2, which are protected by different
locks. If the node has been added to rbtree2, we should not be allowed
to remove it while holding rbtree1's lock.
Before changes in the previous patch in this series, the rbtree_remove
in the second part of Prog A would succeed as the verifier has no way of
knowing which tree owns a particular node at verification time. The
addition of 'owner' field results in bpf_rbtree_remove correctly
failing.
The test added in this patch splits "Prog A" above into two separate BPF
programs - A1 and A2 - and uses a second mapval + kptr_xchg to pass n
from A1 to A2 similarly to the pass from A1 to B. If the test is run
without the fix applied, the remove will succeed.
Kumar's example had the two programs running on separate CPUs. This
patch doesn't do this as it's not necessary to exercise the broken
behavior / validate fixed behavior.
[0]: https://lore.kernel.org/bpf/d7hyspcow5wtjcmw4fugdgyp3fwhljwuscp3xyut5qnwivyeru@ysdq543otzv2
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230718083813.3416104-5-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
As described by Kumar in [0], in shared ownership scenarios it is
necessary to do runtime tracking of {rb,list} node ownership - and
synchronize updates using this ownership information - in order to
prevent races. This patch adds an 'owner' field to struct bpf_list_node
and bpf_rb_node to implement such runtime tracking.
The owner field is a void * that describes the ownership state of a
node. It can have the following values:
NULL - the node is not owned by any data structure
BPF_PTR_POISON - the node is in the process of being added to a data
structure
ptr_to_root - the pointee is a data structure 'root'
(bpf_rb_root / bpf_list_head) which owns this node
The field is initially NULL (set by bpf_obj_init_field default behavior)
and transitions states in the following sequence:
Insertion: NULL -> BPF_PTR_POISON -> ptr_to_root
Removal: ptr_to_root -> NULL
Before a node has been successfully inserted, it is not protected by any
root's lock, and therefore two programs can attempt to add the same node
to different roots simultaneously. For this reason the intermediate
BPF_PTR_POISON state is necessary. For removal, the node is protected
by some root's lock so this intermediate hop isn't necessary.
Note that bpf_list_pop_{front,back} helpers don't need to check owner
before removing as the node-to-be-removed is not passed in as input and
is instead taken directly from the list. Do the check anyways and
WARN_ON_ONCE in this unexpected scenario.
Selftest changes in this patch are entirely mechanical: some BTF
tests have hardcoded struct sizes for structs that contain
bpf_{list,rb}_node fields, those were adjusted to account for the new
sizes. Selftest additions to validate the owner field are added in a
further patch in the series.
[0]: https://lore.kernel.org/bpf/d7hyspcow5wtjcmw4fugdgyp3fwhljwuscp3xyut5qnwivyeru@ysdq543otzv2
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230718083813.3416104-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When looking at the TC selftest reports, I noticed one test was failing
because /proc/net/nf_conntrack was not available.
not ok 373 3992 - Add ct action triggering DNAT tuple conflict
Could not match regex pattern. Verify command output:
cat: /proc/net/nf_conntrack: No such file or directory
It is only available if NF_CONNTRACK_PROCFS kconfig is set. So the issue
can be fixed simply by adding it to the list of required kconfig.
Fixes: e46905641316 ("tc-testing: add test for ct DNAT tuple collision")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/ [1]
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-3-1eb4fd3a96e7@tessares.net
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When looking for something else in LKFT reports [1], I noticed most of
the tests were skipped because the "teardown stage" did not complete
successfully.
Pedro found out this is due to the fact CONFIG_NF_FLOW_TABLE is required
but not listed in the 'config' file. Adding it to the list fixes the
issues on LKFT side. CONFIG_NET_ACT_CT is now set to 'm' in the final
kconfig.
Fixes: c34b961a2492 ("net/sched: act_ct: Create nf flow table per zone")
Cc: stable@vger.kernel.org
Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log [1]
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/ [2]
Suggested-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-2-1eb4fd3a96e7@tessares.net
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When looking for something else in LKFT reports [1], I noticed that the
TC selftest ended with a timeout error:
not ok 1 selftests: tc-testing: tdc.sh # TIMEOUT 45 seconds
The timeout had been introduced 3 years ago, see the Fixes commit below.
This timeout is only in place when executing the selftests via the
kselftests runner scripts. I guess this is not what most TC devs are
using and nobody noticed the issue before.
The new timeout is set to 15 minutes as suggested by Pedro [2]. It looks
like it is plenty more time than what it takes in "normal" conditions.
Fixes: 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second timeout per test")
Cc: stable@vger.kernel.org
Link: https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230711/testrun/18267241/suite/kselftest-tc-testing/test/tc-testing_tdc_sh/log [1]
Link: https://lore.kernel.org/netdev/0e061d4a-9a23-9f58-3b35-d8919de332d7@tessares.net/T/ [2]
Suggested-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20230713-tc-selftests-lkft-v1-1-1eb4fd3a96e7@tessares.net
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Another test which now exercies the path of the verifier where it will
explore call chains rooted at the async callback. Without the prior
fixes, this program loads successfully, which is incorrect.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230717161530.1238-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
For both the d and e options in 'cpupower idle_set' command, an
atoi() conversion is done without checking if the input argument
is all numeric. So, an atoi conversion is done on any character
provided as input and the CPU idle_set operation continues with
that integer value, which may not be what is intended or entirely
correct.
The output of cpuidle-set before patch is as follows:
[root@xxx cpupower]# cpupower idle-set -e 1$
Idlestate 1 enabled on CPU 0
[snip]
Idlestate 1 enabled on CPU 47
[root@xxx cpupower]# cpupower idle-set -e 11
Idlestate 11 not available on CPU 0
[snip]
Idlestate 11 not available on CPU 47
[root@xxx cpupower]# cpupower idle-set -d 12
Idlestate 12 not available on CPU 0
[snip]
Idlestate 12 not available on CPU 47
[root@xxx cpupower]# cpupower idle-set -d qw
Idlestate 0 disabled on CPU 0
[snip]
Idlestate 0 disabled on CPU 47
This patch adds a check for both d and e options in cpuidle-set.c
to see that the idle_set value is all numeric before doing a
string-to-int conversion using strtol().
The output of cpuidle-set after the patch is as below:
[root@xxx cpupower]# ./cpupower idle-set -e 1$
Bad idle_set value: 1$. Integer expected
[root@xxx cpupower]# ./cpupower idle-set -e 11
Idlestate 11 not available on CPU 0
[snip]
Idlestate 11 not available on CPU 47
[root@xxx cpupower]# ./cpupower idle-set -d 12
Idlestate 12 not available on CPU 0
[snip]
Idlestate 12 not available on CPU 47
[root@xxx cpupower]# ./cpupower idle-set -d qw
Bad idle_set value: qw. Integer expected
Signed-off-by: Brahadambal Srinivasan <latha@linux.vnet.ibm.com>
Signed-off-by: Likhitha Korrapati <likhitha@linux.ibm.com>
Tested-by: Pavithra Prakash <pavrampu@linux.vnet.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
If boost sysfs (/sys/devices/system/cpu/cpufreq/boost) file is present
turbo-boost is feature is supported in the hardware. By default this
feature should be enabled. But to disable/enable it write to the sysfs
file. Use the same to control this feature via cpupower.
To enable:
cpupower set --turbo-boost 1
To disable:
cpupower set --turbo-boost 0
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
amd_pstate supports changing of its mode dynamically via `status` sysfs
file. Add the same capability in cpupower. To change the mode to active
mode use below command:
cpupower set --amd-pstate-mode active
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
amd_pstate and intel_pstate active mode drivers support energy
performance preference feature. Through this user can convey it's
energy/performance preference to platform. Add this value change
capability to cpupower.
To change the EPP value use below command:
cpupower set --epp performance
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add is_valid_path API to check whether the sysfs file is present or not.
Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
amd-pstate active mode driver name is "amd-pstate-epp". Use common
prefix for string matching condition to recognise amd-pstate active mode
driver.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Perry Yuan <Perry.Yuan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Don't group events when computing metrics that require more than the
maximum number of simultaneously enabled events on AMD systems.
- Fix multi CU handling in 'perf probe', add a 'perf test' entry to
regress test it.
- Make the 'perf test task_exit' stop generating samples by using the
'dummy' event, all it is testing is if a PERF_RECORD_EXIT is
generated at the end of a perf session. This makes this perf test to
stop sometimes failing on some systems due to a full ring buffer.
- Avoid SEGV if PMU lookup fails for legacy cache terms.
- Fix libsubcmd SEGV/use-after-free when commands aren't excluded.
- Fix OpenCSD (ARM64's CoreSight hardware tracing) library path
resolution when specifying CSLIBS= in the make command line.
- Fix broken feature check for libtracefs due to external lib changes,
use the provided pkgconfig file instead future proof it.
- Sync drm, fcntl, kvm, mount, prctl, socket, vhost, asound, arm64's
cputype headers with the kernel sources, in some cases this made the
tools become aware of new kernel APIs such as ioctls and the
cachestat sysctl.
* tag 'perf-tools-fixes-for-v6.5-1-2023-07-18' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf test task_exit: No need for a cycles event to check if we get an PERF_RECORD_EXIT
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools include UAPI: Sync the sound/asound.h copy with the kernel sources
tools include UAPI: Sync linux/vhost.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
perf parse-events: Avoid SEGV if PMU lookup fails for legacy cache terms
libsubcmd: Avoid SEGV/use-after-free when commands aren't excluded
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf build: Fix broken feature check for libtracefs due to external lib changes
tools include UAPI: Sync linux/mount.h copy with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers uapi: Sync linux/fcntl.h with the kernel sources
perf vendor events amd: Fix large metrics
perf build: Fix library not found error when using CSLIBS
tools headers UAPI: Sync files changed by new cachestat syscall with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
perf probe: Read DWARF files from the correct CU
perf probe: Add test for regression introduced by switch to die_get_decl_file()
|
|
While it probably doesn't make a huge difference given the current KUnit
coverage we will get the best coverage of arm64 architecture features if
we specify -cpu=max rather than picking a specific CPU, this will include
all architecture features that qemu supports including many which have not
yet made it into physical implementations.
Due to performance issues emulating the architected pointer authentication
algorithm it is recommended to use the implementation defined algorithm
that qemu has instead, this should make no meaningful difference to the
coverage and will run the tests faster.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Seven hotfixes, six of which are cc:stable and one of which addresses
a post-6.5 issue"
* tag 'mm-hotfixes-stable-2023-07-18-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
maple_tree: fix node allocation testing on 32 bit
maple_tree: fix 32 bit mas_next testing
selftests/mm: mkdirty: fix incorrect position of #endif
maple_tree: set the node limit when creating a new root node
mm/mlock: fix vma iterator conversion of apply_vma_lock_flags()
prctl: move PR_GET_AUXV out of PR_MCE_KILL
selftests/mm: give scripts execute permission
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Fixes to bugs that are interfering with arm64 and risc workflows. Also
two fixes to timer and mincore tests that are causing test failures"
* tag 'linux-kselftest-fixes-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/arm64: fix build failure during the "emit_tests" step
selftests/riscv: fix potential build failure during the "emit_tests" step
tools: timers: fix freq average calculation
selftests/mincore: fix skip condition for check_huge_pages test
|
|
The default KUnit build options are not supposed to enable any
subsystems that were not already enabled but the topology code is a
library which is generally selected by drivers that want to use it.
Since KUnit is frequently run in virtual environments with minimal
driver support this makes it difficult to enable the toplogy tests so
provide an explicit Kconfig option which can be directly enabled when
using KUnit, and also include this in the KUnit all_tests.config.
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230718-asoc-topology-kunit-enable-v2-5-0ee11e662b92@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are KUnit tests for some of the ASoC utility functions which are
not enabled in the KUnit all_tests.config, do so.
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230718-asoc-topology-kunit-enable-v2-4-0ee11e662b92@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull cleanup of HD-audio PCI IDs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There was never a doubt in my mind that they would not fit into a single
u32 eventually.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
The benchmark is similar to the pipe benchmark. It creates two processes,
one is calling syscalls, and another process is handling them via seccomp
user notifications. It measures the time required to run a specified number
of interations.
$ ./perf bench sched seccomp-notify --sync-mode --loop 1000000
# Running 'sched/seccomp-notify' benchmark:
# Executed 1000000 system calls
Total time: 2.769 [sec]
2.769629 usecs/op
361059 ops/sec
$ ./perf bench sched seccomp-notify
# Running 'sched/seccomp-notify' benchmark:
# Executed 1000000 system calls
Total time: 8.571 [sec]
8.571119 usecs/op
116670 ops/sec
Signed-off-by: Andrei Vagin <avagin@google.com>
Acked-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230308073201.3102738-7-avagin@google.com
Link: https://lore.kernel.org/r/20230630051953.454638-1-avagin@gmail.com
[kees: Added PRIu64 format string]
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Test output:
# RUN global.user_notification_sync ...
# OK global.user_notification_sync
ok 51 global.user_notification_sync
Signed-off-by: Andrei Vagin <avagin@google.com>
Acked-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230308073201.3102738-6-avagin@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Internal node counting was altered and the 64 bit test was updated,
however the 32bit test was missed.
Restore the 32bit test to a functional state.
Link: https://lore.kernel.org/linux-mm/CAMuHMdV4T53fOw7VPoBgPR7fP6RYqf=CBhD_y_vOg53zZX_DnA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230712173916.168805-2-Liam.Howlett@oracle.com
Fixes: 541e06b772c1 ("maple_tree: remove GFP_ZERO from kmem_cache_alloc() and kmem_cache_alloc_bulk()")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The #endif is the wrong side of a } causing a build failure when
__NR_userfaultfd is not defined. Fix this by moving the #end to enclose
the }
Link: https://lkml.kernel.org/r/20230712134648.456349-1-colin.i.king@gmail.com
Fixes: 9eac40fc0cc7 ("selftests/mm: mkdirty: test behavior of (pte|pmd)_mkdirty on VMAs without write permissions")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
PERF_RECORD_EXIT
The intent of this test is to check we get a PERF_RECORD_EXIT as asked
for by setting perf_event_attr.task=1.
When the test was written we didn't had the "dummy" event so we went
with the default event, "cycles".
There were reports of this test failing sometimes, one of these reports
was with a PREEMPT_RT_FULL, but I noticed it failing sometimes with an
aarch64 Firefly board.
In the kernel the call to perf_event_task_output(), that generates the
PERF_RECORD_EXIT may fail when there is not enough memory in the ring
buffer, if the ring buffer is paused, etc.
So switch to using the "dummy" event to use the ring buffer just for
what the test was designed for, avoiding uneeded PERF_RECORD_SAMPLEs.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZLGXmMuNRpx1ubFm@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Mark copy_iovec_from_user() __noclone in order to prevent gcc from
doing an inter-procedural optimization and confuse objtool
- Initialize struct elf fully to avoid build failures
* tag 'objtool_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
iov_iter: Mark copy_iovec_from_user() noclone
objtool: initialize all of struct elf
|
