| Age | Commit message (Collapse) | Author |
|---|
|
Add selftests validating that BPF verifier handles precision marking
for SCALAR registers derived from r10 (fp) register correctly.
Given `r0 = (s8)r10;` syntax is not supported by older Clang compilers,
use the raw BPF instruction syntax to maximize compatibility.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240404214536.3551295-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/ip_gre.c
17af420545a7 ("erspan: make sure erspan_base_hdr is present in skb->head")
5832c4a77d69 ("ip_tunnel: convert __be16 tunnel flags to bitmaps")
https://lore.kernel.org/all/20240402103253.3b54a1cf@canb.auug.org.au/
Adjacent changes:
net/ipv6/ip6_fib.c
d21d40605bca ("ipv6: Fix infinite recursion in fib6_dump_done().")
5fc68320c1fb ("ipv6: remove RTNL protection from inet6_dump_fib()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The struct bpf_fib_lookup is supposed to be of size 64. A recent commit
59b418c7063d ("bpf: Add a check for struct bpf_fib_lookup size") added
a static assertion to check this property so that future changes to the
structure will not accidentally break this assumption.
As it immediately turned out, on some 32-bit arm systems, when AEABI=n,
the total size of the structure was equal to 68, see [1]. This happened
because the bpf_fib_lookup structure contains a union of two 16-bit
fields:
union {
__u16 tot_len;
__u16 mtu_result;
};
which was supposed to compile to a 16-bit-aligned 16-bit field. On the
aforementioned setups it was instead both aligned and padded to 32-bits.
Declare this inner union as __attribute__((packed, aligned(2))) such
that it always is of size 2 and is aligned to 16 bits.
[1] https://lore.kernel.org/all/CA+G9fYtsoP51f-oP_Sp5MOq-Ffv8La2RztNpwvE6+R1VtFiLrw@mail.gmail.com/#t
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: e1850ea9bd9e ("bpf: bpf_fib_lookup return MTU value as output when looked up")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240403123303.1452184-1-aspsk@isovalent.com
|
|
When pinning programs/objects under PATH (eg: during "bpftool prog
loadall") the bpffs is mounted on the parent dir of PATH in the
following situations:
- the given dir exists but it is not bpffs.
- the given dir doesn't exist and the parent dir is not bpffs.
Mounting on the parent dir can also have the unintentional side-
effect of hiding other files located under the parent dir.
If the given dir exists but is not bpffs, then the bpffs should
be mounted on the given dir and not its parent dir.
Similarly, if the given dir doesn't exist and its parent dir is not
bpffs, then the given dir should be created and the bpffs should be
mounted on this new dir.
Fixes: 2a36c26fe3b8 ("bpftool: Support bpffs mountpoint as pin path for prog loadall")
Signed-off-by: Sahil Siddiq <icegambit91@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/2da44d24-74ae-a564-1764-afccf395eeec@isovalent.com/T/#t
Link: https://lore.kernel.org/bpf/20240404192219.52373-1-icegambit91@gmail.com
Closes: https://github.com/libbpf/bpftool/issues/100
Changes since v1:
- Split "mount_bpffs_for_pin" into two functions.
This is done to improve maintainability and readability.
Changes since v2:
- mount_bpffs_for_pin: rename to "create_and_mount_bpffs_dir".
- mount_bpffs_given_file: rename to "mount_bpffs_given_file".
- create_and_mount_bpffs_dir:
- introduce "dir_exists" boolean.
- remove new dir if "mnt_fs" fails.
- improve error handling and error messages.
Changes since v3:
- Rectify function name.
- Improve error messages and formatting.
- mount_bpffs_for_file:
- Check if dir exists before block_mount check.
Changes since v4:
- Use strdup instead of strcpy.
- create_and_mount_bpffs_dir:
- Use S_IRWXU instead of 0700.
- Improve error handling and formatting.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bluetooth and bpf.
Fairly usual collection of driver and core fixes. The large selftest
accompanying one of the fixes is also becoming a common occurrence.
Current release - regressions:
- ipv6: fix infinite recursion in fib6_dump_done()
- net/rds: fix possible null-deref in newly added error path
Current release - new code bugs:
- net: do not consume a full cacheline for system_page_pool
- bpf: fix bpf_arena-related file descriptor leaks in the verifier
- drv: ice: fix freeing uninitialized pointers, fixing misuse of the
newfangled __free() auto-cleanup
Previous releases - regressions:
- x86/bpf: fixes the BPF JIT with retbleed=stuff
- xen-netfront: add missing skb_mark_for_recycle, fix page pool
accounting leaks, revealed by recently added explicit warning
- tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6
non-wildcard addresses
- Bluetooth:
- replace "hci_qca: Set BDA quirk bit if fwnode exists in DT" with
better workarounds to un-break some buggy Qualcomm devices
- set conn encrypted before conn establishes, fix re-connecting to
some headsets which use slightly unusual sequence of msgs
- mptcp:
- prevent BPF accessing lowat from a subflow socket
- don't account accept() of non-MPC client as fallback to TCP
- drv: mana: fix Rx DMA datasize and skb_over_panic
- drv: i40e: fix VF MAC filter removal
Previous releases - always broken:
- gro: various fixes related to UDP tunnels - netns crossing
problems, incorrect checksum conversions, and incorrect packet
transformations which may lead to panics
- bpf: support deferring bpf_link dealloc to after RCU grace period
- nf_tables:
- release batch on table validation from abort path
- release mutex after nft_gc_seq_end from abort path
- flush pending destroy work before exit_net release
- drv: r8169: skip DASH fw status checks when DASH is disabled"
* tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: validate user input for expected length
net/sched: act_skbmod: prevent kernel-infoleak
net: usb: ax88179_178a: avoid the interface always configured as random address
net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45()
net: ravb: Always update error counters
net: ravb: Always process TX descriptor ring
netfilter: nf_tables: discard table flag update with pending basechain deletion
netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
netfilter: nf_tables: reject new basechain after table flag update
netfilter: nf_tables: flush pending destroy work before exit_net release
netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
netfilter: nf_tables: release batch on table validation from abort path
Revert "tg3: Remove residual error handling in tg3_suspend"
tg3: Remove residual error handling in tg3_suspend
net: mana: Fix Rx DMA datasize and skb_over_panic
net/sched: fix lockdep splat in qdisc_tree_reduce_backlog()
net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestamping
net: stmmac: fix rx queue priority assignment
net: txgbe: fix i2c dev name cannot match clkdev
net: fec: Set mac_managed_pm during probe
...
|
|
On s390 z/VM virtual machines command 'perf list' also displays metrics:
# perf list | grep -A 20 'Metric Groups:'
Metric Groups:
No_group:
cpi
[Cycles per Instruction]
est_cpi
[Estimated Instruction Complexity CPI infinite Level 1]
finite_cpi
[Cycles per Instructions from Finite cache/memory]
l1mp
[Level One Miss per 100 Instructions]
l2p
[Percentage sourced from Level 2 cache]
l3p
[Percentage sourced from Level 3 on same chip cache]
l4lp
[Percentage sourced from Level 4 Local cache on same book]
l4rp
[Percentage sourced from Level 4 Remote cache on different book]
memp
[Percentage sourced from memory]
....
#
The command
# perf stat -M cpi -- true
event syntax error: '{CPU_CYCLES/metric-id=CPU_CYCLES/.....'
\___ Bad event or PMU
Unable to find PMU or event on a PMU of 'CPU_CYCLES'
event syntax error: '{CPU_CYCLES/metric-id=CPU_CYCLES/...'
\___ Cannot find PMU `CPU_CYCLES'.
Missing kernel support?
#
fails. 'perf stat' should not fail on metrics when the referenced CPU
Counter Measurement PMU is not available.
Output after:
# perf stat -M est_cpi -- sleep 1
Performance counter stats for 'sleep 1':
1,000,887,494 ns duration_time # 0.00 est_cpi
1.000887494 seconds time elapsed
0.000143000 seconds user
0.000662000 seconds sys
#
Fixes: 7f76b31130680fb3 ("perf list: Add IBM z16 event description for s390")
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20240404064806.1362876-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
s390 introduced the Processor Activity Instrumentation (PAI) counter
facility on LPAR and virtual machines z/VM for models 3931 and 3932.
These counters are stored as raw data in the perf.data file and are
displayed with:
# perf report -i /tmp//perfout-635468 -D | grep Counter
Counter:007 <unknown> Value:0x00000000000186a0
Counter:032 <unknown> Value:0x0000000000000001
Counter:032 <unknown> Value:0x0000000000000001
Counter:032 <unknown> Value:0x0000000000000001
#
However on z/VM virtual machines, the counter names are not retrieved
from the PMU and are shown as '<unknown>'. This is caused by the CPU
string saved in the mapfile.csv for this machine:
^IBM.393[12].*3\.7.[[:xdigit:]]+$,3,cf_z16,core
This string contains the CPU Measurement facility first and second
version number and authorization level (3\.7.[[:xdigit:]]+). These
numbers do not apply to the PAI counter facility. In fact they can be
omitted.
Shorten the CPU identification string for this machine to manufacturer
and model. This is sufficient for all PMU devices.
Output after:
# perf report -i /tmp//perfout-635468 -D | grep Counter
Counter:007 km_aes_128 Value:0x00000000000186a0
Counter:032 kma_gcm_aes_256 Value:0x0000000000000001
Counter:032 kma_gcm_aes_256 Value:0x0000000000000001
Counter:032 kma_gcm_aes_256 Value:0x0000000000000001
#
Fixes: b539deafbadb2fc6 ("perf report: Add s390 raw data interpretation for PAI counters")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20240404064806.1362876-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-04-04
We've added 7 non-merge commits during the last 5 day(s) which contain
a total of 9 files changed, 75 insertions(+), 24 deletions(-).
The main changes are:
1) Fix x86 BPF JIT under retbleed=stuff which causes kernel panics due to
incorrect destination IP calculation and incorrect IP for relocations,
from Uros Bizjak and Joan Bruguera Micó.
2) Fix BPF arena file descriptor leaks in the verifier,
from Anton Protopopov.
3) Defer bpf_link deallocation to after RCU grace period as currently
running multi-{kprobes,uprobes} programs might still access cookie
information from the link, from Andrii Nakryiko.
4) Fix a BPF sockmap lock inversion deadlock in map_delete_elem reported
by syzkaller, from Jakub Sitnicki.
5) Fix resolve_btfids build with musl libc due to missing linux/types.h
include, from Natanael Copa.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Prevent lock inversion deadlock in map delete elem
x86/bpf: Fix IP for relocating call depth accounting
x86/bpf: Fix IP after emitting call depth accounting
bpf: fix possible file descriptor leaks in verifier
tools/resolve_btfids: fix build with musl libc
bpf: support deferring bpf_link dealloc to after RCU grace period
bpf: put uprobe link's path and task in release callback
====================
Link: https://lore.kernel.org/r/20240404183258.4401-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Typing e.nl_msg.error when processing exception is a bit tedious
and counter-intuitive. Set a local .error member to the positive
value of the netlink level error.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240403023426.1762996-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch addresses an issue in the selftests/harness where an
assertion within FIXTURE_TEARDOWN could trigger an infinite loop.
The problem arises because the teardown procedure is meant to
execute once, but the presence of failing assertions (ASSERT_EQ(0, 1))
leads to repeated attempts to execute teardown due to
the long jump mechanism used by the harness for handling assertions.
To resolve this, the patch ensures that the teardown process
runs only once, regardless of assertion outcomes, preventing
the infinite loop and allowing tests to fail.
A simple test demo(test.c):
#include "kselftest_harness.h"
FIXTURE(f)
{
int fd;
};
FIXTURE_SETUP(f)
{
self->fd = 0;
}
FIXTURE_TEARDOWN(f)
{
TH_LOG("TEARDOWN");
ASSERT_EQ(0, 1);
self->fd = -1;
}
TEST_F(f, open_close)
{
ASSERT_NE(self->fd, 1);
}
TEST_HARNESS_MAIN
will always output the following output due to a dead loop until timeout:
# test.c:15:open_close:TEARDOWN
# test.c:16:open_close:Expected 0 (0) == 1 (1)
# test.c:15:open_close:TEARDOWN
# test.c:16:open_close:Expected 0 (0) == 1 (1)
...
But here's what we should and expect to get:
TAP version 13
1..1
# Starting 1 tests from 2 test cases.
# RUN f.open_close ...
# test.c:15:open_close:TEARDOWN
# test.c:16:open_close:Expected 0 (0) == 1 (1)
# open_close: Test terminated by assertion
# FAIL f.open_close
not ok 1 f.open_close
# FAILED: 0 / 1 tests passed.
# Totals: pass:0 fail:1 xfail:0 xpass:0 skip:0 error:0
also this is related to the issue mentioned in this patch
https://patchwork.kernel.org/project/linux-kselftest/patch/e2ba3f8c-80e6-477d-9cea-1c9af820e0ed@alu.unizg.hr/
Signed-off-by: Shengyu Li <shengyu.li.evgeny@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
While sched* events being traced and sched* events continuously happen,
"[xx] event tracing - enable/disable with subsystem level files" would
not stop as on some slower systems it seems to take forever.
Select the first 100 lines of output would be enough to judge whether
there are more than 3 types of sched events.
Fixes: 815b18ea66d6 ("ftracetest: Add basic event tracing test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Yuanhe Shu <xiangzao@linux.alibaba.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Now that the KPROBES, TRACING, BLK_DEV_IO_TRACE, and UPROBE_EVENTS
Kconfig options select the TASKS_TRACE_RCU option, the torture.sh tests
of enabling exactly one of the RCU Tasks flavors fail. This commit
therefore disables these options to allow this testing to succeed.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
The tradition, extending back almost a full year, has been 2GB plus an
additional number of GBs equal to the number of CPUs divided by sixteen.
This tradition has served scftorture well, even the CONFIG_PREEMPT=y
version running KASAN within guest OSes having 40 CPUs. However, this
test recently started OOMing on larger systems, and this commit therefore
gives this test an additional GB of memory.
It is quite possible that further testing on larger systems will show
a need to decrease the divisor from 16 to (say) 8, but that is a change
to make once it has been demonstrated to be required.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
commit e96c6b8f212a ("memblock: report failures when memblock_can_resize
is not set") introduced the usage of panic, which is not defined in
memblock test.
Let's define it directly in panic.h to fix it.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Song Shuai <songshuaishuai@tinylab.org>
CC: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240402132701.29744-3-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
commit 6a9531c3a880 ("memblock: fix crash when reserved memory is not
added to memory") introduce the usage of early_pfn_to_nid, which is not
defined in memblock tests.
The original definition of early_pfn_to_nid is defined in mm.h, so let
add this in the corresponding mm.h.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Yajun Deng <yajun.deng@linux.dev>
CC: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240402132701.29744-2-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
ethtool.py depends on yml files in a specific location of the linux kernel
tree. Using relative lookup for those files means that ethtool.py would
need to be run under tools/net/ynl/. Lookup needed yml files without
depending on the current working directory that ethtool.py is invoked from.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/20240402204000.115081-1-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
-Werror=maybe-uninitialized
In some older distros the build is failing due to
-Werror=maybe-uninitialized, in this case we know that this isn't the
case because 'arch' gets initialized by evsel__get_arch(), so make sure
it is initialized to NULL before returning from evsel__get_arch(), as
suggested by Ian Rogers.
E.g.:
32 17.12 opensuse:15.5 : FAIL gcc version 7.5.0 (SUSE Linux)
util/annotate.c: In function 'hist_entry__get_data_type':
util/annotate.c:2269:15: error: 'arch' may be used uninitialized in this function [-Werror=maybe-uninitialized]
struct arch *arch;
^~~~
cc1: all warnings being treated as errors
43 7.30 ubuntu:18.04-x-powerpc64el : FAIL gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)
util/annotate.c: In function 'hist_entry__get_data_type':
util/annotate.c:2351:36: error: 'arch' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (map__dso(ms->map)->kernel && arch__is(arch, "x86") &&
^~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/CAP-5=fUqtjxAsmdGrnkjhUTLHs-JvV10TtxyocpYDJK_+LYTiQ@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently, when libtraceevent is not linked,
perf does not support tracepoint:
# ./perf record -e sched:sched_switch -a sleep 10
event syntax error: 'sched:sched_switch'
\___ unsupported tracepoint
libtraceevent is necessary for tracepoint support
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
For cross-compilation scenario, library may not be installed in the default
system path. Based on the above requirements, add LIBTRACEEVENT_DIR build
option to support specifying path of libtraceevent.
Example:
1. Cross compile libtraceevent
# cd /opt/libtraceevent
# CROSS_COMPILE=aarch64-linux-gnu- make
2. Cross compile perf
# cd tool/perf
# make VF=1 ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- NO_LIBELF=1 LDFLAGS=--static LIBTRACEEVENT_DIR=/opt/libtraceevent
<SNIP>
Auto-detecting system features:
<SNIP>
... LIBTRACEEVENT_DIR: /opt/libtraceevent
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240314063000.2139877-1-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
without nsdelegate
The test case test_cgcore_lesser_ns_open only tasks effect when cgroup2
is mounted with "nsdelegate" mount option. If it misses this option, or
is remounted without "nsdelegate", the test case will fail. For example,
running bpf/test_cgroup_storage first, and then run cgroup/test_core will
fail on test_cgcore_lesser_ns_open. Skip it if "nsdelegate" is not
detected in cgroup2 mount options.
Fixes: bf35a7879f1d ("selftests: cgroup: Test open-time cgroup namespace usage for migration checks")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Ensure perf events programmed to count during guest execution are
actually enabled before entering the guest in the nVHE
configuration
- Restore out-of-range handler for stage-2 translation faults
- Several fixes to stage-2 TLB invalidations to avoid stale
translations, possibly including partial walk caches
- Fix early handling of architectural VHE-only systems to ensure E2H
is appropriately set
- Correct a format specifier warning in the arch_timer selftest
- Make the KVM banner message correctly handle all of the possible
configurations
RISC-V:
- Remove redundant semicolon in num_isa_ext_regs()
- Fix APLIC setipnum_le/be write emulation
- Fix APLIC in_clrip[x] read emulation
x86:
- Fix a bug in KVM_SET_CPUID{2,} where KVM looks at the wrong CPUID
entries (old vs. new) and ultimately neglects to clear PV_UNHALT
from vCPUs with HLT-exiting disabled
- Documentation fixes for SEV
- Fix compat ABI for KVM_MEMORY_ENCRYPT_OP
- Fix a 14-year-old goof in a declaration shared by host and guest;
the enabled field used by Linux when running as a guest pushes the
size of "struct kvm_vcpu_pv_apf_data" from 64 to 68 bytes. This is
really unconsequential because KVM never consumes anything beyond
the first 64 bytes, but the resulting struct does not match the
documentation
Selftests:
- Fix spelling mistake in arch_timer selftest"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: arm64: Rationalise KVM banner output
arm64: Fix early handling of FEAT_E2H0 not being implemented
KVM: arm64: Ensure target address is granule-aligned for range TLBI
KVM: arm64: Use TLBI_TTL_UNKNOWN in __kvm_tlb_flush_vmid_range()
KVM: arm64: Don't pass a TLBI level hint when zapping table entries
KVM: arm64: Don't defer TLB invalidation when zapping table entries
KVM: selftests: Fix __GUEST_ASSERT() format warnings in ARM's arch timer test
KVM: arm64: Fix out-of-IPA space translation fault handling
KVM: arm64: Fix host-programmed guest events in nVHE
RISC-V: KVM: Fix APLIC in_clrip[x] read emulation
RISC-V: KVM: Fix APLIC setipnum_le/be write emulation
RISC-V: KVM: Remove second semicolon
KVM: selftests: Fix spelling mistake "trigged" -> "triggered"
Documentation: kvm/sev: clarify usage of KVM_MEMORY_ENCRYPT_OP
Documentation: kvm/sev: separate description of firmware
KVM: SEV: fix compat ABI for KVM_MEMORY_ENCRYPT_OP
KVM: selftests: Check that PV_UNHALT is cleared when HLT exiting is disabled
KVM: x86: Use actual kvm_cpuid.base for clearing KVM_FEATURE_PV_UNHALT
KVM: x86: Introduce __kvm_get_hypervisor_cpuid() helper
KVM: SVM: Return -EINVAL instead of -EBUSY on attempt to re-init SEV/SEV-ES
...
|
|
versions lower than v5.8
In the environment of ubuntu 20.04 (the version of kernel headers is
5.4), there is an error in building perf:
CC trace/beauty/fs_at_flags.o
trace/beauty/fs_at_flags.c: In function ‘faccessat2__scnprintf_flags’:
trace/beauty/fs_at_flags.c:35:14: error: ‘AT_EACCESS’ undeclared (first use in this function); did you mean ‘DN_ACCESS’?
35 | if (flags & AT_EACCESS) {
| ^~~~~~~~~~
| DN_ACCESS
trace/beauty/fs_at_flags.c:35:14: note: each undeclared identifier is reported only once for each function it appears in
commit 8a1ad4413519b10f ("tools headers: Remove now unused copies of
uapi/{fcntl,openat2}.h and asm/fcntl.h") removes fcntl.h from tools
headers directory, and fs_at_flags.c uses the 'AT_EACCESS' macro.
This macro was introduced in the kernel version v5.8. For system with a
kernel version older than this version, it will cause compilation to
fail.
Fixes: 8a1ad4413519b10f ("tools headers: Remove now unused copies of uapi/{fcntl,openat2}.h and asm/fcntl.h")
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240403122558.1438841-1-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is to keep the existing behavior with objdump. It needs to show
symbol information of global variables like below:
Percent | Source code & Disassembly of elf for cycles:P (1 samples, percent: local period)
------------------------------------------------------------------------------------------------
: 0 0xffffffff81338f70 <vm_normal_page>:
0.00 : ffffffff81338f70: endbr64
0.00 : ffffffff81338f74: callq 0xffffffff81083a40
0.00 : ffffffff81338f79: movq %rdi, %r8
0.00 : ffffffff81338f7c: movq %rdx, %rdi
0.00 : ffffffff81338f7f: callq *0x17021c3(%rip) # ffffffff82a3b148 <pv_ops+0x1e8>
0.00 : ffffffff81338f85: movq 0xffbf3c(%rip), %rdx # ffffffff82334ec8 <physical_mask>
0.00 : ffffffff81338f8c: testq %rax, %rax ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
0.00 : ffffffff81338f8f: je 0xffffffff81338fd0 here
0.00 : ffffffff81338f91: movq %rax, %rcx
0.00 : ffffffff81338f94: andl $1, %ecx
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240329215812.537846-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now it can use the capstone library to disassemble the instructions.
Let's use that (if available) for perf annotate to speed up. Currently
it only supports x86 architecture. With this change I can see ~3x speed
up in data type profiling.
But note that capstone cannot give the source file and line number info.
For now, users should use the external objdump for that by specifying
the --objdump option explicitly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240329215812.537846-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The util/annotate.c code has both disassembly and sample annotation
related codes. Factor out the disasm part so that it can be handled
more easily.
No functional changes intended.
Committer notes:
Add missing include env.h, util.h, bpf-event.h and bpf-util.h to
disasm.c, to fix things like:
util/disasm.c: In function ‘symbol__disassemble_bpf’:
util/disasm.c:1203:9: error: implicit declaration of function ‘perf_exe’ [-Werror=implicit-function-declaration]
1203 | perf_exe(tpath, sizeof(tpath));
| ^~~~~~~~
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240329215812.537846-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Likewise, add ins__is_nop() to check if the current instruction is NOP.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240329215812.537846-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is to prepare separation of disasm related code. Use the public
ins API instead of checking the internal data structure.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240329215812.537846-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Code cleanup, replace strcmp(evsel__name(evsel, {NAME})) with
evsel__name_is() helper.
No functional change.
Committer notes:
Fix this build error:
trace.syscalls.events.bpf_output = evlist__last(trace.evlist);
- assert(evsel__name_is(trace.syscalls.events.bpf_output), "__augmented_syscalls__");
+ assert(evsel__name_is(trace.syscalls.events.bpf_output, "__augmented_syscalls__"));
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240401062724.1006010-3-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When 'perf sched' enables the call-graph recording, sample_type of dummy
event does not have PERF_SAMPLE_CALLCHAIN, timehist_check_attr() checks
that the evsel does not have a callchain, and set show_callchain to 0.
Currently 'perf sched timehist' only saves callchain when processing the
'sched:sched_switch event', timehist_check_attr() only needs to determine
whether the event has PERF_SAMPLE_CALLCHAIN.
Before:
# perf sched record -g true
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 4.153 MB perf.data (7536 samples) ]
# perf sched timehist
Samples do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
147851.826019 [0000] perf[285035] 0.000 0.000 0.000
147851.826029 [0000] migration/0[15] 0.000 0.003 0.009
147851.826063 [0001] perf[285035] 0.000 0.000 0.000
147851.826069 [0001] migration/1[21] 0.000 0.003 0.006
<SNIP>
After:
# perf sched record -g true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.572 MB perf.data (822 samples) ]
# perf sched timehist
time cpu task name waittime sch delay runtime
[tid/pid] (msec) (msec) (msec)
----------- --- --------------- -------- -------- -----
4193.035164 [0] perf[277062] 0.000 0.000 0.000 __traceiter_sched_switch <- __traceiter_sched_switch <- __sched_text_start <- preempt_schedule_common <- __cond_resched <- __wait_for_common <- wait_for_completion
4193.035174 [0] migration/0[15] 0.000 0.003 0.009 __traceiter_sched_switch <- __traceiter_sched_switch <- __sched_text_start <- smpboot_thread_fn <- kthread <- ret_from_fork
4193.035207 [1] perf[277062] 0.000 0.000 0.000 __traceiter_sched_switch <- __traceiter_sched_switch <- __sched_text_start <- preempt_schedule_common <- __cond_resched <- __wait_for_common <- wait_for_completion
4193.035214 [1] migration/1[21] 0.000 0.003 0.007 __traceiter_sched_switch <- __traceiter_sched_switch <- __sched_text_start <- smpboot_thread_fn <- kthread <- ret_from_fork
<SNIP>
Fixes: 9c95e4ef06572349 ("perf evlist: Add evlist__findnew_tracking_event() helper")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20240401062724.1006010-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For data type profiling output, it should be in sync with normal output
so make it display percentage for each field. Also use coloring scheme
for users to identify fields with big overhead easily.
Users can use --show-total-period or --show-nr-samples to change the
output style like in the normal perf annotate output.
Before:
$ perf annotate --data-type
Annotate type: 'struct task_struct' in [kernel.kallsyms] (34 samples):
============================================================================
samples offset size field
34 0 9792 struct task_struct {
2 0 24 struct thread_info thread_info {
0 0 8 long unsigned int flags;
1 8 8 long unsigned int syscall_work;
0 16 4 u32 status;
1 20 4 u32 cpu;
};
After:
$ perf annotate --data-type
Annotate type: 'struct task_struct' in [kernel.kallsyms] (34 samples):
============================================================================
Percent offset size field
100.00 0 9792 struct task_struct {
3.55 0 24 struct thread_info thread_info {
0.00 0 8 long unsigned int flags;
1.63 8 8 long unsigned int syscall_work;
0.00 16 4 u32 status;
1.91 20 4 u32 cpu;
};
Committer testing:
First collect a suitable perf.data file for use with 'perf annotate --data-type':
root@number:~# perf mem record -a sleep 1s
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 11.047 MB perf.data (3466 samples) ]
root@number:~#
Then, before:
root@number:~# perf annotate --data-type
Annotate type: 'union ' in /usr/lib64/libc.so.6 (6 samples):
============================================================================
samples offset size field
6 0 40 union {
6 0 40 struct __pthread_mutex_s __data {
2 0 4 int __lock;
0 4 4 unsigned int __count;
0 8 4 int __owner;
1 12 4 unsigned int __nusers;
2 16 4 int __kind;
1 20 2 short int __spins;
0 22 2 short int __elision;
0 24 16 __pthread_list_t __list {
0 24 8 struct __pthread_internal_list* __prev;
0 32 8 struct __pthread_internal_list* __next;
};
};
0 0 0 char* __size;
2 0 8 long int __align;
};
<SNIP>
And after:
Annotate type: 'union ' in /usr/lib64/libc.so.6 (6 samples):
============================================================================
Percent offset size field
100.00 0 40 union {
100.00 0 40 struct __pthread_mutex_s __data {
31.27 0 4 int __lock;
0.00 4 4 unsigned int __count;
0.00 8 4 int __owner;
7.67 12 4 unsigned int __nusers;
53.10 16 4 int __kind;
7.96 20 2 short int __spins;
0.00 22 2 short int __elision;
0.00 24 16 __pthread_list_t __list {
0.00 24 8 struct __pthread_internal_list* __prev;
0.00 32 8 struct __pthread_internal_list* __next;
};
};
0.00 0 0 char* __size;
31.27 0 8 long int __align;
};
<SNIP>
The lines with percentages >= 7.67 have its percentages red colored.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240322224313.423181-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The options array in cmd_annotate() has duplicate --group options. It
only needs one and let's get rid of the other.
$ perf annotate -h 2>&1 | grep group
--group Show event group information together
--group Show event group information together
Fixes: 7ebaf4890f63eb90 ("perf annotate: Support '--group' option")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240322224313.423181-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Introduce a test case to evaluate AF_XDP's robustness by pushing hardware
and software ring sizes to their limits. This test ensures AF_XDP's
reliability amidst potential producer/consumer throttling due to maximum
ring utilization. The testing strategy includes:
1. Configuring rings to their maximum allowable sizes.
2. Executing a series of tests across diverse batch sizes to assess
system's behavior under different configurations.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-8-tushar.vyavahare@intel.com
|
|
Add a new test case that stresses AF_XDP and the driver by configuring
small hardware and software ring sizes. This verifies that AF_XDP continues
to function properly even with insufficient ring space that could lead
to frequent producer/consumer throttling. The test procedure involves:
1. Set the minimum possible ring configuration(tx 64 and rx 128).
2. Run tests with various batch sizes(1 and 63) to validate the system's
behavior under different configurations.
Update Makefile to include network_helpers.o in the build process for
xskxceiver.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-7-tushar.vyavahare@intel.com
|
|
handling AF_XDP socket closures
Introduce a new function, set_ring_size(), to manage asynchronous AF_XDP
socket closure. Retry set_hw_ring_size up to SOCK_RECONF_CTR times if it
fails due to an active AF_XDP socket. Return an error immediately for
non-EBUSY errors. This enhances robustness against asynchronous AF_XDP
socket closures during ring size changes.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-6-tushar.vyavahare@intel.com
|
|
ring size
Introduce a new function called set_hw_ring_size that allows for the
dynamic configuration of the ring size within the interface.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-5-tushar.vyavahare@intel.com
|
|
max interface size
Introduce a new function called get_hw_size that retrieves both the
current and maximum size of the interface and stores this information
in the 'ethtool_ringparam' structure.
Remove ethtool_channels struct from xdp_hw_metadata.c due to redefinition
error. Remove unused linux/if.h include from flow_dissector BPF test to
address CI pipeline failure.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-4-tushar.vyavahare@intel.com
|
|
Convert the constant BATCH_SIZE into a variable named batch_size to allow
dynamic modification at runtime. This is required for the forthcoming
changes to support testing different hardware ring sizes.
While running these tests, a bug was identified when the batch size is
roughly the same as the NIC ring size. This has now been addressed by
Maciej's fix in commit 913eda2b08cc ("i40e: xsk: remove count_mask").
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-3-tushar.vyavahare@intel.com
|
|
This commit duplicates the ethtool.h file from the include/uapi/linux
directory in the kernel source to the tools/include/uapi/linux directory.
This action ensures that the ethtool.h file used in the tools directory
is in sync with the kernel's version, maintaining consistency across the
codebase.
There are some checkpatch warnings in this file that could be cleaned up,
but I preferred to move it over as-is for now to avoid disrupting the code.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-2-tushar.vyavahare@intel.com
|
|
LLVM generates bpf_addr_space_cast instruction while translating
pointers between native (zero) address space and
__attribute__((address_space(N))). The addr_space=0 is reserved as
bpf_arena address space.
rY = addr_space_cast(rX, 0, 1) is processed by the verifier and
converted to normal 32-bit move: wX = wY.
rY = addr_space_cast(rX, 1, 0) : used to convert a bpf arena pointer to
a pointer in the userspace vma. This has to be converted by the JIT.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240325150716.4387-3-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Checking if dump is empty requires a couple of casts.
Add a convenient wrapper.
Add an example use in the netdev sample, loopback is always
present so an empty dump is an error.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240329181651.319326-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to prevent mptcpify prog from affecting the running results
of other BPF tests, a pid limit was added to restrict it from only
modifying its own program.
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8987e2938e15e8ec390b85b5dcbee704751359dc.1712054986.git.tanggeliang@kylinos.cn
|
|
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
If user request --no-msr or is not able to access the MSRs,
turbostat should clear all the counters added with --add.
Because MSR access permission checks are done after the cmdline is
parsed, the decision has to be defered up until the transition into
no-msr mode happen.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Checking early if the permissions are even needed gets rid of the
warnings about some of them missing. Earlier we issued a warning in case
of missing MSR and/or perf permissions, even when user never asked for
counters that require those.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
To allow unprivileged user to run turbostat seamlessly.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
By using the perf API we spend less time in between the reads of the
counters, resulting in more accurate calculations of the dependent
metrics.
Using perf API is also usually faster overall, although cache miss, if
we get one, is more costly when using perf vs MSR driver.
We would fallback to the msr reads if the sysfs isn't there or when in
--no-perf mode.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add the --no-perf option to allow users to run turbostat without
accessing perf.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add --no-msr option to allow users to run turbostat without
accessing MSRs via the MSR driver.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Eliminate redundant debug output for core and package scope counters.
Include name and path for all "ADDED" counters.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Previously a failed read of /dev/cpu_dma_latency erroneously complained
turbostat: capget(CAP_SYS_ADMIN) failed, try "# setcap cap_sys_admin=ep ./turbostat
This went unnoticed because this file is typically visible to root,
and turbostat was typically run as root.
Going forward, when a non-root user can run turbostat...
Complain about failed read access to this file only if --debug is used.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
If MSRs cannot be read, values can be obtained from cpuid.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
