| Age | Commit message (Collapse) | Author |
|---|
|
Add an L1 (guest) assert to the nested exceptions test to verify that KVM
doesn't put VMRUN in an STI shadow (AMD CPUs bleed the shadow into the
guest's int_state if a #VMEXIT occurs before VMRUN fully completes).
Add a similar assert to the VMX side as well, because why not.
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250224165442.2338294-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
There is a spelling mistake in a PER_PAGE_DEBUG debug message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250227220819.656780-1-colin.i.king@gmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Enable zero copy on file backed target, meantime add one fio test for
covering write verify, another test for mkfs/mount/umount.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228161919.2869102-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add file backed ublk target code, meantime add one fio test for
covering write verify, another test for mkfs/mount/umount.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228161919.2869102-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Both ublk driver and userspace heavily depends on io_uring subsystem,
and tools/testing/selftests/ should be the best place for holding this
cross-subsystem tests.
Add basic read/write IO test over this ublk null disk, and make sure ublk
working.
More tests will be added.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228161919.2869102-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace X86_CMPXCHG64 with X86_CX8, as CX8 is the name of the CPUID
flag, thus to make it consistent with X86_FEATURE_CX8 defined in
<asm/cpufeatures.h>.
No functional change intended.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250228082338.73859-2-xin@zytor.com
|
|
GRO tests are timing dependent and can easily flake. This is partially
mitigated in gro.sh by giving each subtest 3 chances to pass. However,
this still flakes on some machines. Reduce the flakiness by:
- Bumping retries to 6.
- Setting napi_defer_hard_irqs to 1 to reduce the chance that GRO is
flushed prematurely. This also lets us reduce the gro_flush_timeout
from 1ms to 100us.
Tested: Ran `gro.sh -t large` 1000 times. There were no failures with
this change. Ran inside strace to increase flakiness.
Signed-off-by: Kevin Krakauer <krakauer@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250226192725.621969-4-krakauer@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
gro.c:main no longer erroneously claims a test passes when running as a
sender.
Tested: Ran `gro.sh -t large` to verify the sender no longer prints a
status.
Signed-off-by: Kevin Krakauer <krakauer@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250226192725.621969-3-krakauer@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Modify gro.sh to return a useful exit code when the -t flag is used. It
formerly returned 0 no matter what.
Tested: Ran `gro.sh -t large` and verified that test failures return 1.
Signed-off-by: Kevin Krakauer <krakauer@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250226192725.621969-2-krakauer@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The fprobe test fails on Fedora 41 since the fprobe test assumption that
the number of enabled_functions is zero before the test starts is not
necessarily true. Some user space tools, like systemd, add BPF programs
that attach to functions. Those will show up in the enabled_functions table
and must be taken into account by the fprobe test.
Therefore count the number of lines of enabled_functions before tests
start, and use that as base when comparing expected results.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250226142703.910860-1-hca@linux.ibm.com
Fixes: e85c5e9792b9 ("selftests/ftrace: Update fprobe test to check enabled_functions file")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc5).
Conflicts:
drivers/net/ethernet/cadence/macb_main.c
fa52f15c745c ("net: cadence: macb: Synchronize stats calculations")
75696dd0fd72 ("net: cadence: macb: Convert to get_stats64")
https://lore.kernel.org/20250224125848.68ee63e5@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/intel/ice/ice_sriov.c
79990cf5e7ad ("ice: Fix deinitializing VF in error path")
a203163274a4 ("ice: simplify VF MSI-X managing")
net/ipv4/tcp.c
18912c520674 ("tcp: devmem: don't write truncated dmabuf CMSGs to userspace")
297d389e9e5b ("net: prefix devmem specific helpers")
net/mptcp/subflow.c
8668860b0ad3 ("mptcp: reset when MPTCP opts are dropped after join")
c3349a22c200 ("mptcp: consolidate subflow cleanup")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes. The only slightly large change is for ASoC
Cirrus codec, but that's still in a normal range. All the rest are
small device-specific fixes and should be fairly safe to take"
* tag 'sound-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix microphone regression on ASUS N705UD
ALSA: hda/realtek: Fix wrong mic setup for ASUS VivoBook 15
ASoC: cs35l56: Prevent races when soft-resetting using SPI control
firmware: cs_dsp: Remove async regmap writes
ASoC: Intel: sof_sdw: warn both sdw and pch dmic are used
ASoC: SOF: Intel: don't check number of sdw links when set dmic_fixup
ASoC: dapm-graph: set fill colour of turned on nodes
ASoC: fsl: Rename stream name of SAI DAI driver
ASoC: es8328: fix route from DAC to output
ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-900NXS2
ASoC: tas2764: Set the SDOUT polarity correctly
ASoC: tas2764: Fix power control mask
ALSA: usb-audio: Avoid dropping MIDI events at closing multiple ports
ASoC: tas2770: Fix volume scale
|
|
Introduce __COMPAT_scx_bpf_events() to use scx_bpf_events() in a
compatible way also with kernels that don't provide this kfunc.
This also fixes the following error with scx_qmap when running on a
kernel that does not provide scx_bpf_events():
; scx_bpf_events(&events, sizeof(events)); @ scx_qmap.bpf.c:777
318: (b7) r2 = 72 ; R2_w=72 async_cb
319: <invalid kfunc call>
kfunc 'scx_bpf_events' is referenced but wasn't resolved
Fixes: 9865f31d852a4 ("sched_ext: Add scx_bpf_events() and scx_read_event() for BPF schedulers")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Some drivers, like tg3, do not set combined-count:
$ ethtool -l enp4s0f1
Channel parameters for enp4s0f1:
Pre-set maximums:
RX: 4
TX: 4
Other: n/a
Combined: n/a
Current hardware settings:
RX: 4
TX: 1
Other: n/a
Combined: n/a
In the case where combined-count is not set, the ethtool netlink code
in the kernel elides the value and the code in the test:
netnl.channels_get(...)
With a tg3 device, the returned dictionary looks like:
{'header': {'dev-index': 3, 'dev-name': 'enp4s0f1'},
'rx-max': 4,
'rx-count': 4,
'tx-max': 4,
'tx-count': 1}
Note that the key 'combined-count' is missing. As a result of this
missing key the test raises an exception:
# Exception| if channels['combined-count'] == 0:
# Exception| ~~~~~~~~^^^^^^^^^^^^^^^^^^
# Exception| KeyError: 'combined-count'
Change the test to check if 'combined-count' is a key in the dictionary
first and if not assume that this means the driver has separate RX and
TX queues.
With this change, the test now passes successfully on tg3 and mlx5
(which does have a 'combined-count').
Fixes: 1cf270424218 ("net: selftest: add test for netdev netlink queue-get API")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250226181957.212189-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are going to apply a new series that conflicts with pending
work in x86/mm, so merge in x86/mm to avoid it, and also to
refresh the x86/cpu branch with fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
X86_FEATURE_USE_IBPB was introduced in:
2961298efe1e ("x86/cpufeatures: Clean up Spectre v2 related CPUID flags")
to have separate flags for when the CPU supports IBPB (i.e. X86_FEATURE_IBPB)
and when an IBPB is actually used to mitigate Spectre v2.
Ever since then, the uses of IBPB expanded. The name became confusing
because it does not control all IBPB executions in the kernel.
Furthermore, because its name is generic and it's buried within
indirect_branch_prediction_barrier(), it's easy to use it not knowing
that it is specific to Spectre v2.
X86_FEATURE_USE_IBPB is no longer needed because all the IBPB executions
it used to control are now controlled through other means (e.g.
switch_mm_*_ibpb static branches).
Remove the unused feature bit.
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20250227012712.3193063-7-yosry.ahmed@linux.dev
|
|
There is a spelling mistake in a sig_print() message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250227091533.599213-1-colin.i.king@gmail.com
|
|
Change wording of test number recommendation to "the recommended number
of times".
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Add tests to check that the napi retained the IRQ after down/up,
multiple changes in the number of rx queues and after
attaching/releasing XDP program.
Tested on ice and idpf:
# NETIF=<iface> tools/testing/selftests/drivers/net/hw/irq.py
KTAP version 1
1..4
ok 1 irq.check_irqs_reported
ok 2 irq.check_reconfig_queues
ok 3 irq.check_reconfig_xdp
ok 4 irq.check_down
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Tested-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-7-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Expand IPV6_TCLASS to also cover IP_TOS.
Expand IPV6_HOPLIMIT to also cover IP_TTL.
Expand csmg_sender.c to allow setting IPv4 setsockopts.
Also rename struct v6 to cmsg to match its expanded scope.
Don't bother updating all occurrences of tclass and hoplimit.
Rename cmsg_ipv6.sh to cmsg_ip.sh to match the expanded scope.
Be careful around the subtle API difference between TCLASS and TOS.
IP_TOS includes ECN bits. Add a test to verify that these are masked
when making routing decisions.
Diff is more concise with --word-diff
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250225022431.2083926-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move IPV6_TCLASS and IPV6_HOPLIMIT into loops, to be able to use them
for IP_TOS and IP_TTL in a follow-on patch.
Indentation in this file is a mix of four spaces and tabs for double
indents. To minimize code churn, maintain that pattern.
Very small diff if viewing with -w.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250225022431.2083926-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
One difference here with other pseudo-firmware bitmap registers
is that the default/reset value for the supported hypercall
function-ids is 0 at present. Hence, modify the test accordingly.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250221140229.12588-7-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
This reverts commit 16767502aa990cca2cb7d1372b31d328c4c85b40.
Nolibc gained support for uname(2) and sscanf(3) which are the
dependencies of ksft_min_kernel_version().
So re-enable support for ksft_min_kernel_version() under nolibc.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250209-nolibc-scanf-v2-2-c29dea32f1cd@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
These functions are used often, also in selftests.
sscanf() itself is also used by kselftest.h itself.
The implementation is limited and only supports numeric arguments.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250209-nolibc-scanf-v2-1-c29dea32f1cd@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"Fixes to TCP socket identification, documentation, and tests"
* tag 'landlock-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add binaries to .gitignore
selftests/landlock: Test that MPTCP actions are not restricted
selftests/landlock: Test TCP accesses with protocol=IPPROTO_TCP
landlock: Fix non-TCP sockets restriction
landlock: Minor typo and grammar fixes in IPC scoping documentation
landlock: Fix grammar error
selftests/landlock: Enable the new CONFIG_AF_UNIX_OOB
|
|
Add a selftest to validate the behavior of the NUMA-aware scheduler
functionalities, including idle CPU selection within nodes, per-node
DSQs and CPU to node mapping.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Add xstate testing specifically for those vector register states,
validating kernel's context switching and ensuring ABI compliance.
Use the established xstate testing framework.
Alternatively, this invocation could be placed directly in
xstate.c::main(). However, the current test file naming convention, which
clearly specifies the tested area, seems reasonable. Adding avx.c
considerably aligns with that convention.
The test output should be like this for ZMM_Hi256 as an example:
$ avx_64
...
[RUN] AVX-512 ZMM_Hi256: check context switches, 10 iterations, 5 threads.
[OK] No incorrect case was found.
[RUN] AVX-512 ZMM_Hi256: inject xstate via ptrace().
[OK] 'xfeatures' in SW reserved area was correctly written
[OK] xstate was correctly updated.
[RUN] AVX-512 ZMM_Hi256: load xstate and raise SIGUSR1
[OK] 'magic1' is valid
[OK] 'xfeatures' in SW reserved area is valid
[OK] 'xfeatures' in XSAVE header is valid
[OK] xstate delivery was successful
[OK] 'magic2' is valid
[RUN] AVX-512 ZMM_Hi256: load new xstate from sighandler and check it after sigreturn
[OK] xstate was restored correctly
But systems without AVX-512 will look like:
...
The kernel does not support feature number: 5
The kernel does not support feature number: 6
The kernel does not support feature number: 7
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-10-chang.seok.bae@intel.com
|
|
The established xstate test code is designed to be generic, but certain
xstates require special handling and cannot be tested without additional
adjustments.
Clarify which xstates are currently supported, and enforce testing only
for them.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-9-chang.seok.bae@intel.com
|
|
Currently, each of the three xstate tests runs as a separate invocation,
requiring the xstate number to be passed and state information to be
reconstructed repeatedly. This approach arose from their individual and
isolated development, but now it makes sense to unify them.
Introduce a wrapper function that first verifies feature availability
from the kernel and constructs the necessary state information once. The
wrapper then sequentially invokes all tests to ensure consistent
execution.
Update the AMX test to use this unified invocation.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-8-chang.seok.bae@intel.com
|
|
With the refactored test cases, another xstate exposure to userspace is
through signal delivery. While amx.c includes signal-related scenarios,
its primary focus is on xstate permission management, which is largely
specific to dynamic states.
The remaining gap is testing xstate preservation and restoration across
signal delivery. The kernel defines an ABI for presenting xstate in the
signal frame, closely resembling the hardware XSAVE format, where xstate
modification is also possible.
Introduce a new test case to verify xstate preservation across signal
delivery and return, that is ensuring ABI compatibility by:
- Loading xstate before raising a signal.
- Verifying correct exposure in the signal frame
- Modifying xstate in the signal frame before returning.
- Checking the state restoration upon signal return.
Integrate this test into the AMX test suite as an initial usage site.
Expected output:
$ amx_64
...
[RUN] AMX Tile data: load xstate and raise SIGUSR1
[OK] 'magic1' is valid
[OK] 'xfeatures' in SW reserved area is valid
[OK] 'xfeatures' in XSAVE header is valid
[OK] xstate delivery was successful
[OK] 'magic2' is valid
[RUN] AMX Tile data: load new xstate from sighandler and check it after sigreturn
[OK] xstate was restored correctly
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-7-chang.seok.bae@intel.com
|
|
Following the refactoring of the context switching test, the ptrace test is
another component reusable for other xstate features. As part of this
restructuring, add a missing check to validate the
user_xstateregs->xstate_fx_sw field in the ABI.
Also, replace err() and fatal_error() with ksft_exit_fail_msg() for
consistency in error handling.
Expected output:
$ amx_64
...
[RUN] AMX Tile data: inject xstate via ptrace().
[OK] 'xfeatures' in SW reserved area was correctly written
[OK] xstate was correctly updated.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-6-chang.seok.bae@intel.com
|
|
The existing context switching and ptrace tests in amx.c are not specific
to dynamic states, making them reusable for general xstate testing.
As a first step, move the context switching test to xstate.c. Refactor
the test code to allow specifying which xstate component being tested.
To decouple the test from dynamic states, remove the permission request
code. In fact, The permission request inside the test wrapper was
redundant.
Additionally, replace fatal_error() with ksft_exit_fail_msg() for
consistency in error handling.
Expected output:
$ amx_64
...
[RUN] AMX Tile data: check context switches, 10 iterations, 5 threads.
[OK] No incorrect case was found.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-5-chang.seok.bae@intel.com
|
|
After moving essential helpers from amx.c, the code remains neutral
regarding which xstate components it handles. However, explicitly listing
known components helps users identify which features are ready for
testing.
Enumerate xstate components to facilitate identification. Extend struct
xstate_info to include a name field, providing a human-readable
identifier.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-4-chang.seok.bae@intel.com
|
|
The AMX test introduced several XSAVE-related helper functions, but so
far, it has been the only user of them. These helpers can be generalized
for broader test of multiple xstate features.
Move most XSAVE-related code into xsave.h, making it shareable. The
restructuring includes:
* Establishing low-level XSAVE helpers for saving and restoring register
states, as well as handling XSAVE buffers.
* Generalizing state data manipuldations: set_rand_data()
* Introducing a generic feature query helper: get_xstate_info()
While doing so, remove unused defines in amx.c.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-3-chang.seok.bae@intel.com
|
|
The x86 selftests frequently register and clean up signal handlers, but
the sethandler() and clearhandler() functions have been redundantly
copied across multiple .c files.
Move these functions to helpers.h to enable reuse across tests,
eliminating around 250 lines of duplicate code.
Converge the error handling by using ksft_exit_fail_msg(), which is
functionally equivalent with err() within the selftest framework.
This change is a prerequisite for the upcoming xstate selftest, which
requires signal handling for registering and cleaning up handlers.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-2-chang.seok.bae@intel.com
|
|
Assert that MIDR_EL1, REVIDR_EL1, AIDR_EL1 are writable from userspace,
that the changed values are visible to guests, and that they are
preserved across a vCPU reset.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250225005401.679536-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add a selftest that verifies symmetric RSS hash is working as intended.
The test runs iterations of traffic, swapping the src/dst UDP ports, and
verifies that the same RX queue is receiving the traffic in both cases.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250224174416.499070-5-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of guessing a port and checking whether it's available, get an
available port from the OS.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250224174416.499070-4-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some distributions may not enable MPTCP by default. All other MPTCP tests
source mptcp_lib.sh to ensure MPTCP is enabled before testing. However,
the ip_local_port_range test is the only one that does not include this
step.
Let's also ensure MPTCP is enabled in netns for ip_local_port_range so
that it passes on all distributions.
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250224094013.13159-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix tools/ quiet build Makefile infrastructure that was broken when
working on tools/perf/ without testing on other tools/ living
utilities.
* tag 'perf-tools-fixes-for-v6.14-2-2025-02-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools: Remove redundant quiet setup
tools: Unify top-level quiet infrastructure
|
|
Make all the SCX_OPS_* and SCX_PICK_IDLE_* flags available to the
user-space part of the schedulers via the compat interface.
This allows schedulers / selftests to set all the ops flags in
user-space, rather than having them split between BPF and user-space.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
There are a couple of inconsistent indents around code/literal blocks.
Adjust them to make this file easier to parse.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Fix a trivial typo.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Not all annotated accesses provide the semantics their syntactic tags
would imply. For example, an 'acquire tag on a write does not imply that
the write is finally in the Acquire set and provides acquire ordering.
To distinguish in those cases between the syntactic tags and actual
sets, we capitalize the former, so 'ACQUIRE tags may be present on both
reads and writes, but only reads will appear in the Acquire set.
For tags where the two concepts are the same we do not use specific
capitalization to make this distinction.
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Jonas Oberhauser <jonas.oberhauser@huaweicloud.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com> # herdtools7.7.58
|
|
A new version of herd7 provides a -lkmmv2 switch which overrides the old herd7
behavior of simply ignoring any softcoded tags in the .def and .bell files. We
port LKMM to this version of herd7 by providing the switch in linux-kernel.cfg
and reporting an error if the LKMM is used without this switch.
To preserve the semantics of LKMM, we also softcode the Noreturn tag on atomic
RMW which do not return a value and define atomic_add_unless with an Mb tag in
linux-kernel.def.
We update the herd-representation.txt accordingly and clarify some of the
resulting combinations.
Co-developed-by: Hernan Ponce de Leon <hernan.poncedeleon@huaweicloud.com>
Signed-off-by: Hernan Ponce de Leon <hernan.poncedeleon@huaweicloud.com>
Signed-off-by: Jonas Oberhauser <jonas.oberhauser@huaweicloud.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Akira Yokosawa <akiyks@gmail.com> # herdtools7.7.58
|
|
Fix the following objtool warning during build time:
fs/bcachefs/btree_cache.o: warning: objtool: btree_node_lock.constprop.0() falls through to next function bch2_recalc_btree_reserve()
fs/bcachefs/btree_update.o: warning: objtool: bch2_trans_update_get_key_cache() falls through to next function need_whiteout_for_snapshot()
bch2_trans_unlocked_or_in_restart_error() is an Obviously Correct (tm)
panic() wrapper, add it to the list of known noreturns.
Fixes: b318882022a8 ("bcachefs: bch2_trans_verify_not_unlocked_or_in_restart()")
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20250218064230.219997-1-youling.tang@linux.dev
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
A C jump table (such as the one used by the BPF interpreter) is a const
global array of absolute code addresses, and this means that the actual
values in the table may not be known until the kernel is booted (e.g.,
when using KASLR or when the kernel VA space is sized dynamically).
When using PIE codegen, the compiler will default to placing such const
global objects in .data.rel.ro (which is annotated as writable), rather
than .rodata (which is annotated as read-only). As C jump tables are
explicitly emitted into .rodata, this used to result in warnings for
LoongArch builds (which uses PIE codegen for the entire kernel) like
Warning: setting incorrect section attributes for .rodata..c_jump_table
due to the fact that the explicitly specified .rodata section inherited
the read-write annotation that the compiler uses for such objects when
using PIE codegen.
This warning was suppressed by explicitly adding the read-only
annotation to the __attribute__((section(""))) string, by commit
c5b1184decc8 ("compiler.h: specify correct attribute for .rodata..c_jump_table")
Unfortunately, this hack does not work on Clang's integrated assembler,
which happily interprets the appended section type and permission
specifiers as part of the section name, which therefore no longer
matches the hard-coded pattern '.rodata..c_jump_table' that objtool
expects, causing it to emit a warning
kernel/bpf/core.o: warning: objtool: ___bpf_prog_run+0x20: sibling call from callable instruction with modified stack frame
Work around this, by emitting C jump tables into .data.rel.ro instead,
which is treated as .rodata by the linker script for all builds, not
just PIE based ones.
Fixes: c5b1184decc8 ("compiler.h: specify correct attribute for .rodata..c_jump_table")
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> # on LoongArch
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250221135704.431269-6-ardb+git@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Exception branch returns without freeing 'fi'.
Signed-off-by: liuye <liuye@kylinos.cn>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250114082650.113105-1-liuye@kylinos.cn
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for cacheinfo DT probing to avoid reading non-boolean
properties as booleans.
- A fix for cpufeature to use bitmap_equal() instead of memcmp(), so
unused bits are ignored.
- Fixes for cmpxchg and futex cmpxchg that properly encode the sign
extension requirements on inline asm, which results in spurious
successes. This manifests in at least inode_set_ctime_current, but is
likely just a disaster waiting to happen.
- A fix for the rseq selftests, which was using an invalid constraint.
- A pair of fixes for signal frame size handling:
- We were reserving space for an extra empty extension context
header on systems with extended signal context, thus resulting in
unnecessarily large allocations.
- We weren't properly checking for available extensions before
calculating the signal stack size, which resulted in undersized
stack allocations on some systems (at least those with T-Head
custom vectors).
Also, we've added Alex as a reviewer. He's been helping out a ton
lately, thanks!
* tag 'riscv-for-linus-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Add myself as a riscv reviewer
riscv: signal: fix signal_minsigstksz
riscv: signal: fix signal frame size
rseq/selftests: Fix riscv rseq_offset_deref_addv inline asm
riscv/futex: sign extend compare value in atomic cmpxchg
riscv/atomic: Do proper sign extension also for unsigned in arch_cmpxchg
riscv: cpufeature: use bitmap_equal() instead of memcmp()
riscv: cacheinfo: Use of_property_present() for non-boolean properties
|
