| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"12 hotfixes, 5 of which are c:stable. All singletons, about half of
which are MM"
* tag 'mm-hotfixes-stable-2024-10-09-15-46' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: zswap: delete comments for "value" member of 'struct zswap_entry'.
CREDITS: sort alphabetically by name
secretmem: disable memfd_secret() if arch cannot set direct map
.mailmap: update Fangrui's email
mm/huge_memory: check pmd_special() only after pmd_present()
resource, kunit: fix user-after-free in resource_test_region_intersects()
fs/proc/kcore.c: allow translation of physical memory addresses
selftests/mm: fix incorrect buffer->mirror size in hmm2 double_map test
device-dax: correct pgoff align in dax_set_mapping()
kthread: unpark only parked kthread
Revert "mm: introduce PF_MEMALLOC_NORECLAIM, PF_MEMALLOC_NOWARN"
bcachefs: do not use PF_MEMALLOC_NORECLAIM
|
|
meta iifname veth0 ip daddr ... fib daddr oif
... is expected to return "dummy0" interface which is part of same vrf
as veth0.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The hmm2 double_map test was failing due to an incorrect buffer->mirror
size. The buffer->mirror size was 6, while buffer->ptr size was 6 *
PAGE_SIZE. The test failed because the kernel's copy_to_user function was
attempting to copy a 6 * PAGE_SIZE buffer to buffer->mirror. Since the
size of buffer->mirror was incorrect, copy_to_user failed.
This patch corrects the buffer->mirror size to 6 * PAGE_SIZE.
Test Result without this patch
==============================
# RUN hmm2.hmm2_device_private.double_map ...
# hmm-tests.c:1680:double_map:Expected ret (-14) == 0 (0)
# double_map: Test terminated by assertion
# FAIL hmm2.hmm2_device_private.double_map
not ok 53 hmm2.hmm2_device_private.double_map
Test Result with this patch
===========================
# RUN hmm2.hmm2_device_private.double_map ...
# OK hmm2.hmm2_device_private.double_map
ok 53 hmm2.hmm2_device_private.double_map
Link: https://lkml.kernel.org/r/20240927050752.51066-1-donettom@linux.ibm.com
Fixes: fee9f6d1b8df ("mm/hmm/test: add selftests for HMM")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The sched_ext selftests is missing proper cross-compilation support, a
proper target entry, and out-of-tree build support.
When building the kselftest suite, e.g.:
make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- \
TARGETS=sched_ext SKIP_TARGETS="" O=/output/foo \
-C tools/testing/selftests install
or:
make ARCH=arm64 LLVM=1 TARGETS=sched_ext SKIP_TARGETS="" \
O=/output/foo -C tools/testing/selftests install
The expectation is that the sched_ext is included, cross-built, the
correct toolchain is picked up, and placed into /output/foo.
In contrast to the BPF selftests, the sched_ext suite does not use
bpftool at test run-time, so it is sufficient to build bpftool for the
build host only.
Add ARCH, CROSS_COMPILE, OUTPUT, and TARGETS support to the sched_ext
selftest. Also, remove some variables that were unused by the
Makefile.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: David Vernet <void@manifault.com>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The previous commit introduced the use of CLONE_NEWTIME without including
<sched.h> which contains its definition.
Add an explicit include of <sched.h> to ensure that CLONE_NEWTIME
is correctly defined before it is used.
Fixes: 2aec90036dcd ("selftests: vDSO: ensure vgetrandom works in a time namespace")
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Improve the error and skip condition messages to let the developer know
precisely where a test has failed. Also make better use of the ksft api
for this.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Rather than building on supported archs, build on all archs, and then
use the presence of the symbol in the vDSO to either skip the test or
move forward with it.
Note that this means that this test no longer checks whether the symbol
was correctly added to the kernel. But hopefully this will be clear
enough to developers and we'll cross our fingers that symbols aren't
removed by accident and not caught after this change.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Rather than using symlinks to find the vgetrandom-chacha.S file for each
arch, store this in a file that uses the compiler to determine
architecture, and then make use of weak symbols to skip the test on
architectures that don't provide the code.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- ops.enqueue() didn't have a way to tell whether select_task_rq_scx()
and thus ops.select() were skipped. Some schedulers were incorrectly
using SCX_ENQ_WAKEUP. Add SCX_ENQ_CPU_SELECTED and fix scx_qmap using
it.
- Remove a spurious WARN_ON_ONCE() in scx_cgroup_exit()
- Fix error information clobbering during load
- Add missing __weak markers to BPF helper declarations
- Doc update
* tag 'sched_ext-for-6.12-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Documentation: Update instructions for running example schedulers
sched_ext, scx_qmap: Add and use SCX_ENQ_CPU_SELECTED
sched/core: Add ENQUEUE_RQ_SELECTED to indicate whether ->select_task_rq() was called
sched/core: Make select_task_rq() take the pointer to wake_flags instead of value
sched_ext: scx_cgroup_exit() may be called without successful scx_cgroup_init()
sched_ext: Improve error reporting during loading
sched_ext: Add __weak markers to BPF helper function decalarations
|
|
Creates a cgroup with a single nice CPU hog process running.
fork() is called to generate the nice process because un-nicing is
not possible (see man nice(3)). If fork() was not used to generate
the CPU hog, we would run the rest of the cgroup selftest suite as a
nice process.
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix an assert() to handle captured and unprocessed ARM CoreSight CPU
traces
- Fix static build compilation error when libdw isn't installed or is
too old
- Add missing include when building with
!HAVE_DWARF_GETLOCATIONS_SUPPORT
- Add missing refcount put on 32-bit DSOs
- Fix disassembly of user space binaries by setting the binary_type of
DSO when loading
- Update headers with the kernel sources, including asound.h, sched.h,
fcntl, msr-index.h, irq_vectors.h, socket.h, list_sort.c and arm64's
cputype.h
* tag 'perf-tools-fixes-for-v6.12-1-2024-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf cs-etm: Fix the assert() to handle captured and unprocessed cpu trace
perf build: Fix build feature-dwarf_getlocations fail for old libdw
perf build: Fix static compilation error when libdw is not installed
perf dwarf-aux: Fix build with !HAVE_DWARF_GETLOCATIONS_SUPPORT
tools headers arm64: Sync arm64's cputype.h with the kernel sources
perf tools: Cope with differences for lib/list_sort.c copy from the kernel
tools check_headers.sh: Add check variant that excludes some hunks
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers UAPI: Sync the linux/in.h with the kernel sources
perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools include UAPI: Sync linux/fcntl.h copy with the kernel sources
tools include UAPI: Sync linux/sched.h copy with the kernel sources
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf vdso: Missed put on 32-bit dsos
perf symbol: Set binary_type of dso when loading
|
|
Starting with 6.12 commit 85585b4bc8d8 ("selftests: add ncdevmem, netcat
for devmem TCP") kselftest-all creates additional outputs that
kselftest-clean does not cleanup:
$ make defconfig
$ make kselftest-all
$ make kselftest-clean
$ git clean -ndxf | grep tools/net
Would remove tools/net/ynl/lib/__pycache__/
Would remove tools/net/ynl/lib/ynl.a
Would remove tools/net/ynl/lib/ynl.d
Would remove tools/net/ynl/lib/ynl.o
Make kselftest-clean remove the newly added net/ynl outputs.
Fixes: 85585b4bc8d8 ("selftests: add ncdevmem, netcat for devmem TCP")
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20241005215600.852260-1-gthelen@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The generated include.sh should be ignored by git. Create a new
gitignore and add the file to the list.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-3-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The include.sh file is generated when building the net/rds selftests,
but there is no rule to delete it with the clean target. Add the file to
EXTRA_CLEAN in order to remove it when required.
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-2-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This executable is missing from the corresponding gitignore file.
Add msg_oob to the net gitignore list.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20241005-net-selftests-gitignore-v2-1-3a0b2876394a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
* kvm-arm64/idregs-6.12:
: .
: Make some fields of ID_AA64DFR0_EL1 and ID_AA64PFR1_EL1
: writable from userspace, so that a VMM can influence the
: set of guest-visible features.
:
: - for ID_AA64DFR0_EL1: DoubleLock, WRPs, PMUVer and DebugVer
: are writable (courtesy of Shameer Kolothum)
:
: - for ID_AA64PFR1_EL1: BT, SSBS, CVS2_frac are writable
: (courtesy of Shaoqin Huang)
: .
KVM: selftests: aarch64: Add writable test for ID_AA64PFR1_EL1
KVM: arm64: Allow userspace to change ID_AA64PFR1_EL1
KVM: arm64: Use kvm_has_feat() to check if FEAT_SSBS is advertised to the guest
KVM: arm64: Disable fields that KVM doesn't know how to handle in ID_AA64PFR1_EL1
KVM: arm64: Make the exposed feature bits in AA64DFR0_EL1 writable from userspace
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
scx_qmap and other schedulers in the SCX repo are using SCX_ENQ_WAKEUP to
tell whether ops.select_cpu() was called. This is incorrect as
ops.select_cpu() can be skipped in the wakeup path and leads to e.g.
incorrectly skipping direct dispatch for tasks that are bound to a single
CPU.
sched core has been updated to specify ENQUEUE_RQ_SELECTED if
->select_task_rq() was called. Map it to SCX_ENQ_CPU_SELECTED and update
scx_qmap to test it instead of SCX_ENQ_WAKEUP.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Cc: Daniel Hodges <hodges.daniel.scott@gmail.com>
Cc: Changwoo Min <multics69@gmail.com>
Cc: Andrea Righi <andrea.righi@linux.dev>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
|
|
Recently the loongarch defconfig stopped working with the default 128 MiB
of memory. The VM just spins infinitively.
Increasing the available memory to 1 GiB, similar to s390, fixes the
issue. To avoid having to do this for each architecture on its own,
proactively apply to all architectures.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20241007-nolibc-qemu-mem-v1-1-c1c2f9acd0f8@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Recent version of GCC and clang gained -Wimplicit-fallthrough,
warning about implicit fall-through between switch labels.
As nolibc does not control the compilation flags, this can trigger
warnings for when built by the user.
Make use of the "fallthrough" attribute to explicitly annotate the
expected fall-throughs and silence the warning.
Link: https://lore.kernel.org/r/20240930-nolibc-fallthrough-v2-1-2e8d10fe3430@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
arch-s390.h uses types from std.h, but does not include it.
Depending on the inclusion order the compilation can fail.
Include std.h explicitly to avoid these errors.
Fixes: 404fa87c0eaf ("tools/nolibc: s390: provide custom implementation for sys_fork")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20240927-nolibc-s390-std-h-v1-1-30442339a6b9@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to build warnings, install scripts, run-time error path, and git
status cleanups to tests:
- devices/probe: fix for Python3 regex string syntax warnings
- clone3: removing unused macro from clone3_cap_checkpoint_restore()
- vDSO: fix to align getrandom states to cache line
- core and exec: add missing executables to .gitignore files
- rtc: change to skip test if /dev/rtc0 can't be accessed
- timers/posix: fix warn_unused_result result in __fatal_error()
- breakpoints: fix to detect suspend successful condition correctly
- hid: fix to install required dependencies to run the test"
* tag 'linux_kselftest-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: breakpoints: use remaining time to check if suspend succeed
kselftest/devices/probe: Fix SyntaxWarning in regex strings for Python3
selftest: hid: add missing run-hid-tools-tests.sh
selftests: vDSO: align getrandom states to cache line
selftests: exec: update gitignore for load_address
selftests: core: add unshare_test to gitignore
clone3: clone3_cap_checkpoint_restore: remove unused MAX_PID_NS_LEVEL macro
selftests:timers: posix_timers: Fix warn_unused_result in __fatal_error()
selftest: rtc: Check if could access /dev/rtc0 before testing
|
|
Currently, the second bridge command overwrites the first one.
Fix this by adding this VID to the interface behind $swp2.
The one_bridge_two_pvids() test intends to check that there is no
leakage of traffic between bridge ports which have a single VLAN - the
PVID VLAN.
Because of a typo, port $swp1 is configured with a PVID twice (second
command overwrites first), and $swp2 isn't configured at all (and since
the bridge vlan_default_pvid property is set to 0, this port will not
have a PVID at all, so it will drop all untagged and priority-tagged
traffic).
So, instead of testing the configuration that was intended, we are
testing a different one, where one port has PVID 2 and the other has
no PVID. This incorrect version of the test should also pass, but is
ineffective for its purpose, so fix the typo.
This typo has an impact on results of the test,
potentially leading to wrong conclusions regarding
the functionality of a network device.
The tests results:
TEST: Switch ports in VLAN-aware bridge with different PVIDs:
Unicast non-IP untagged [ OK ]
Multicast non-IP untagged [ OK ]
Broadcast non-IP untagged [ OK ]
Unicast IPv4 untagged [ OK ]
Multicast IPv4 untagged [ OK ]
Unicast IPv6 untagged [ OK ]
Multicast IPv6 untagged [ OK ]
Unicast non-IP VID 1 [ OK ]
Multicast non-IP VID 1 [ OK ]
Broadcast non-IP VID 1 [ OK ]
Unicast IPv4 VID 1 [ OK ]
Multicast IPv4 VID 1 [ OK ]
Unicast IPv6 VID 1 [ OK ]
Multicast IPv6 VID 1 [ OK ]
Unicast non-IP VID 4094 [ OK ]
Multicast non-IP VID 4094 [ OK ]
Broadcast non-IP VID 4094 [ OK ]
Unicast IPv4 VID 4094 [ OK ]
Multicast IPv4 VID 4094 [ OK ]
Unicast IPv6 VID 4094 [ OK ]
Multicast IPv6 VID 4094 [ OK ]
Fixes: 476a4f05d9b8 ("selftests: forwarding: add a no_forwarding.sh test")
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Kacper Ludwinski <kac.ludwinski@icloud.com>
Link: https://patch.msgid.link/20241002051016.849-1-kac.ludwinski@icloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix tp_printk command line option crashing the kernel
With the code that can handle a buffer from a previous boot, the
trace_check_vprintf() needed access to the delta of the address space
used by the old buffer and the current buffer. To do so, the
trace_array (tr) parameter was used. But when tp_printk is enabled on
the kernel command line, no trace buffer is used and the trace event
is sent directly to printk(). That meant the tr field of the iterator
descriptor was NULL, and since tp_printk still uses
trace_check_vprintf() it caused a NULL dereference.
- Add ptrace.h include to x86 ftrace file for completeness
- Fix rtla installation when done with out-of-tree build
- Fix the help messages in rtla that were incorrect
- Several fixes to fix races with the timerlat and hwlat code
Several locking issues were discovered with the coordination between
timerlat kthread creation and hotplug. As timerlat has callbacks from
hotplug code to start kthreads when CPUs come online. There are also
locking issues with grabbing the cpu_read_lock() and the locks within
timerlat.
* tag 'trace-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/hwlat: Fix a race during cpuhp processing
tracing/timerlat: Fix a race during cpuhp processing
tracing/timerlat: Drop interface_lock in stop_kthread()
tracing/timerlat: Fix duplicated kthread creation due to CPU online/offline
x86/ftrace: Include <asm/ptrace.h>
rtla: Fix the help text in osnoise and timerlat top tools
tools/rtla: Fix installation from out-of-tree build
tracing: Fix trace_check_vprintf() when tp_printk is used
|
|
Add a new netfilter selftests to test against br_netfilter panics when
VxLAN single-device is used together with untagged traffic and high MTU.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20241001154400.22787-3-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Slightly high amount of changes in this round, partly because of my
vacation in the last weeks. But all changes are small and nothing
looks worrisome.
The biggest LOCs is MAINTAINERS updates, and there is a core change
for card-ID string creation for non-ASCII inputs. Others are rather
device-specific, such as new quirks and device IDs for ASoC, usual
HD-audio and USB-audio quirks and fixes, as well as regression fixes
in HD-audio HDMI audio and Conexant codec"
* tag 'sound-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ALSA: hda/conexant: Fix conflicting quirk for System76 Pangolin
ALSA: line6: add hw monitor volume control to POD HD500X
ALSA: gus: Fix some error handling paths related to get_bpos() usage
ALSA: hda: Add missing parameter description for snd_hdac_stream_timecounter_init()
ALSA: usb-audio: Add native DSD support for Luxman D-08u
ALSA: core: add isascii() check to card ID generator
MAINTAINERS: ALSA: use linux-sound@vger.kernel.org list
Revert "ALSA: hda: Conditionally use snooping for AMD HDMI"
ASoC: intel: sof_sdw: Add check devm_kasprintf() returned value
ASoC: imx-card: Set card.owner to avoid a warning calltrace if SND=m
ASoC: dt-bindings: davinci-mcasp: Fix interrupts property
ASoC: qcom: sm8250: add qrb4210-rb2-sndcard compatible string
ASoC: dt-bindings: qcom,sm8250: add qrb4210-rb2-sndcard
ALSA: hda: fix trigger_tstamp_latched
ALSA: hda/realtek: Add a quirk for HP Pavilion 15z-ec200
ALSA: hda/generic: Drop obsoleted obey_preferred_dacs flag
ALSA: hda/generic: Unconditionally prefer preferred_dacs pairs
ALSA: silence integer wrapping warning
ASoC: Intel: soc-acpi: arl: Fix some missing empty terminators
ASoC: Intel: soc-acpi-intel-rpl-match: add missing empty item
...
|
|
While it's a bit off topic for them the floating point stress tests do give
us some coverage of context thrashing cases, and also of active signal
delivery separate to the relatively complicated framework in the actual
signals tests. Have the tests enable GCS on startup, ignoring failures so
they continue to work as before on systems without GCS.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Tested-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-39-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add a stress test which runs one more process than we have CPUs spinning
through a very recursive function with frequent syscalls immediately prior
to return and signals being injected every 100ms. The goal is to flag up
any scheduling related issues, for example failure to ensure that barriers
are inserted when moving a GCS using task to another CPU. The test runs for
a configurable amount of time, defaulting to 10 seconds.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Tested-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-38-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Do some testing of the signal handling for GCS, checking that a GCS
frame has the expected information in it and that the expected signals
are delivered with invalid operations.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Tested-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-37-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Verify that we can lock individual GCS mode bits, that other modes
aren't affected and as a side effect also that every combination of
modes can be enabled.
Normally the inability to reenable GCS after disabling it would be an
issue with testing but fortunately the kselftest_harness runs each test
within a fork()ed child. This can be inconvenient for some kinds of
testing but here it means that each test is in a separate thread and
therefore won't be affected by other tests in the suite.
Once we get toolchains with support for enabling GCS by default we will
need to take care to not do that in the build system but there are no
such toolchains yet so it is not yet an issue.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Tested-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-36-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There are things like threads which nolibc struggles with which we want
to add coverage for, and the ABI allows us to test most of these even if
libc itself does not understand GCS so add a test application built
using the system libc.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Tested-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-35-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This test program just covers the basic GCS ABI, covering aspects of the
ABI as standalone features without attempting to integrate things.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Tested-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-34-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Since it is not possible to return from the function that enabled GCS
without disabling GCS it is very inconvenient to use the signal handling
tests to cover GCS when GCS is not enabled by the toolchain and runtime,
something that no current distribution does. Since none of the testcases
do anything with stacks that would cause problems with GCS we can sidestep
this issue by unconditionally enabling GCS on startup and exiting with a
call to exit() rather than a return from main().
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-33-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently we ignore si_code unless the expected signal is a SIGSEGV, in
which case we enforce it being SEGV_ACCERR. Allow test cases to specify
exactly which si_code should be generated so we can validate this, and
test for other segfault codes.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-32-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Teach the framework about the GCS signal context, avoiding warnings on
the unknown context.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-31-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In preparation for testing GCS related signal handling add it as a feature
we check for in the signal handling support code.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-30-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add coverage of the GCS hwcap to the hwcap selftest, using a read of
GCSPR_EL0 to generate SIGILL without having to worry about enabling GCS.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Tested-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-29-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The help text in osnoise top and timerlat top had some minor errors
and omissions. The -d option was missing the 's' (second) abbreviation and
the error message for '-d' used '-D'.
Cc: stable@vger.kernel.org
Fixes: 1eceb2fc2ca54 ("rtla/osnoise: Add osnoise top mode")
Fixes: a828cd18bc4ad ("rtla: Add timerlat tool and timelart top mode")
Link: https://lore.kernel.org/20240813155831.384446-1-ezulian@redhat.com
Suggested-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
rtla now supports out-of-tree builds, but installation fails as it
still tries to install the rtla binary from the source tree. Use the
existing macro $(RTLA) to refer to the binary.
Link: https://lore.kernel.org/ZudubuoU_JHjPZ7w@decadent.org.uk
Fixes: 01474dc706ca ("tools/rtla: Use tools/build makefiles to build rtla")
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Tested-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Ben Hutchings <benh@debian.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ieee802154, bluetooth and netfilter.
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both
dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in
sctp_listen_start
- mac802154: fix potential RCU dereference issue in
mac802154_scan_worker
- eth: fec: restart PPS after link state change"
* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
doc: net: napi: Update documentation for napi_schedule_irqoff
net/ncsi: Disable the ncsi work before freeing the associated structure
net: phy: qt2025: Fix warning: unused import DeviceId
gso: fix udp gso fraglist segmentation after pull from frag_list
bridge: mcast: Fail MDB get request on empty entry
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
net: phy: realtek: Check the index value in led_hw_control_get
ppp: do not assume bh is held in ppp_channel_bridge_input()
selftests: rds: move include.sh to TEST_FILES
net: test for not too small csum_start in virtio_net_hdr_to_skb()
net: gso: fix tcp fraglist segmentation after pull from frag_list
ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
net: add more sanity checks to qdisc_pkt_len_init()
net: avoid potential underflow in qdisc_pkt_len_init() with UFO
net: ethernet: ti: cpsw_ale: Fix warning on some platforms
net: microchip: Make FDMA config symbol invisible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix incorrect documentation in uapi/linux/netfilter/nf_tables.h
regarding flowtable hooks, from Phil Sutter.
2) Fix nft_audit.sh selftests with newer nft binaries, due to different
(valid) audit output, also from Phil.
3) Disable BH when duplicating packets via nf_dup infrastructure,
otherwise race on nf_skb_duplicated for locally generated traffic.
From Eric.
4) Missing return in callback of selftest C program, from zhang jiao.
netfilter pull request 24-10-02
* tag 'nf-24-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: Add missing return value
netfilter: nf_tables: prevent nf_skb_duplicated corruption
selftests: netfilter: Fix nft_audit.sh for newer nft binaries
netfilter: uapi: NFTA_FLOWTABLE_HOOK is NLA_NESTED
====================
Link: https://patch.msgid.link/20241002202421.1281311-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The include.sh file is generated for inclusion and should not be executable.
Otherwise, it will be added to kselftest-list.txt. Additionally, add the
executable bit for test.py at the same time to ensure proper functionality.
Fixes: 3ade6ce1255e ("selftests: rds: add testing infrastructure")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240927041349.81216-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull generic unaligned.h cleanups from Al Viro:
"Get rid of architecture-specific <asm/unaligned.h> includes, replacing
them with a single generic <linux/unaligned.h> header file.
It's the second largest (after asm/io.h) class of asm/* includes, and
all but two architectures actually end up using exact same file.
Massage the remaining two (arc and parisc) to do the same and just
move the thing to from asm-generic/unaligned.h to linux/unaligned.h"
[ This is one of those things that we're better off doing outside the
merge window, and would only cause extra conflict noise if it was in
linux-next for the next release due to all the trivial #include line
updates. Rip off the band-aid. - Linus ]
* tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move asm/unaligned.h to linux/unaligned.h
arc: get rid of private asm/unaligned.h
parisc: get rid of private asm/unaligned.h
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
If one builds perf with DEBUG=1, captures data on multiple CPUs and
finally runs 'perf report -C <cpu>' for only one of the cpus, assert()
aborts the program. This happens because there are empty queues with
format set.
This patch changes the condition to abort only if a queue is not empty
and if the format is unset.
$ make -C tools/perf DEBUG=1 CORESIGHT=1 CSLIBS=/usr/lib CSINCLUDES=/usr/include install
$ perf record -o kcore --kcore -e cs_etm/timestamp/k -s -C 0-1 dd if=/dev/zero of=/dev/null bs=1M count=1
$ perf report --input kcore/data --vmlinux=/home/ikoskine/projects/linux/vmlinux -C 1
Aborted (core dumped)
Fixes: 57880a7966be510c ("perf: cs-etm: Allocate queues for all CPUs")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240924233930.5193-1-ilkka@os.amperecomputing.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For libdw versions below 0.177, need to link libdl.a in addition to
libbebl.a during static compilation, otherwise
feature-dwarf_getlocations compilation will fail.
Before:
$ make LDFLAGS=-static
BUILD: Doing 'make -j20' parallel build
<SNIP>
Makefile.config:483: Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157
<SNIP>
$ cat ../build/feature/test-dwarf_getlocations.make.output
/usr/bin/ld: /usr/lib/gcc/x86_64-linux-gnu/9/../../../x86_64-linux-gnu/libebl.a(eblclosebackend.o): in function `ebl_closebackend':
(.text+0x20): undefined reference to `dlclose'
collect2: error: ld returned 1 exit status
After:
$ make LDFLAGS=-static
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
$ ./perf probe
Usage: perf probe [<options>] 'PROBEDEF' ['PROBEDEF' ...]
or: perf probe [<options>] --add 'PROBEDEF' [--add 'PROBEDEF' ...]
or: perf probe [<options>] --del '[GROUP:]EVENT' ...
or: perf probe --list [GROUP:]EVENT ...
<SNIP>
Fixes: 536661da6ea18fe6 ("perf: build: Only link libebl.a for old libdw")
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240919013513.118527-3-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If libdw is not installed in build environment, the output of
'pkg-config --modversion libdw' is empty, causing LIBDW_VERSION_2 to be
empty and the shell test will have the following error:
/bin/sh: 1: test: -lt: unexpected operator
Before:
$ pkg-config --modversion libdw
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
/bin/sh: 1: test: -lt: unexpected operator
After:
1. libdw is not installed:
$ pkg-config --modversion libdw
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Package libdw was not found in the pkg-config search path.
Perhaps you should add the directory containing `libdw.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libdw' found
Makefile.config:473: No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR
2. libdw version is lower than 0.177
$ pkg-config --modversion libdw
0.176
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
INSTALL libsubcmd_headers
INSTALL libapi_headers
INSTALL libperf_headers
INSTALL libsymbol_headers
INSTALL libbpf_headers
LINK perf
3. libdw version is higher than 0.177
$ pkg-config --modversion libdw
0.186
$ make LDFLAGS=-static -j16
BUILD: Doing 'make -j20' parallel build
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
<SNIP>
CC util/bpf-utils.o
CC util/pfm.o
LD util/perf-util-in.o
LD perf-util-in.o
AR libperf-util.a
LINK perf
Fixes: 536661da6ea18fe6 ("perf: build: Only link libebl.a for old libdw")
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240919013513.118527-2-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The linked fixes commit added an #include "dwarf-aux.h" to disasm.h
which gets picked up in a lot of places. Without
HAVE_DWARF_GETLOCATIONS_SUPPORT the stubs return an errno, so include
errno.h to fix the following build error:
In file included from util/disasm.h:8,
from util/annotate.h:16,
from builtin-top.c:23:
util/dwarf-aux.h: In function 'die_get_var_range':
util/dwarf-aux.h:183:10: error: 'ENOTSUP' undeclared (first use in this function)
183 | return -ENOTSUP;
| ^~~~~~~
Fixes: 782959ac248ac3cb ("perf annotate: Add "update_insn_state" callback function to handle arch specific instruction tracking")
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241001123625.1063153-1-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The current xdp_devmap_attach test attaches a program
that redirects to another program via devmap.
It is, however, never executed, so do that to catch
any bugs that might occur during execution.
Also, execute the same for a veth pair so that we
also cover the non-generic path.
Warning: Running this without the bugfix in this series
will likely crash your system.
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240911-devel-koalo-fix-ingress-ifindex-v4-2-5c643ae10258@linutronix.de
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
