Age | Commit message (Collapse) | Author |
|
Installs the .so and .py files generated by SWIG to system's site packages
directory. This allows the Python bindings to be used system wide. This
commit also includes documentation on setting up and installing the Python
bindings.
Link: https://lore.kernel.org/r/20241219012606.38963-1-jwyatt@redhat.com
Signed-off-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Signed-off-by: "John B. Wyatt IV" <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The amd-pstate section is grouped under boost, which isn't appropriate.
Adjust the indentation so that it is it's own section.
Link: https://lore.kernel.org/r/20241218191144.3440854-8-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When EPP has been enabled the hardware will autonomously change
frequencies on it's own and thus there is no latency with changing
from the kernel.
Avoid doing the maximum latency check when EPP is found. This will
apply to both amd-pstate and intel-pstate drivers.
Link: https://lore.kernel.org/r/20241218191144.3440854-7-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The EPP value is useful for characterization of performance. Show
it in cpupower frequency-info output.
Link: https://lore.kernel.org/r/20241218191144.3440854-6-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When the amd-pstate is in use frequency is set by the hardware and
measured by the kernel through using the aperf and mperf registers.
There is no direct call to the hardware to indicate current frequency.
Detect that this feature is in use and skip the check.
Link: https://lore.kernel.org/r/20241218191144.3440854-5-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The rankings are useful information to determine if the scheduler
is placing tasks appropriately for the hardware.
Link: https://lore.kernel.org/r/20241218191144.3440854-4-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
When cpufreq_get_sysfs_value_from_table() is passed a table with
kernel strings that report 'enabled' or 'disabled' it always returns 0
because these can't cleanly convert to integers.
Explicitly look for enabled or disabled strings from the kernel to handle
this.
Link: https://lore.kernel.org/r/20241218191144.3440854-3-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
print_duration() has a return; statement at the end of the function
that is not necessary as it's a void function.
Link: https://lore.kernel.org/r/20241218191144.3440854-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.13
A mix of quirks and small fixes, nothing too major anywhere.
|
|
The pattern rule `$(OUTPUT)/%: %.c` inadvertently included a circular
dependency on the global-timer target due to its inclusion in
$(TEST_GEN_PROGS_EXTENDED). This resulted in a circular dependency
warning during the build process.
To resolve this, the dependency on $(TEST_GEN_PROGS_EXTENDED) has been
replaced with an explicit dependency on $(OUTPUT)/libatest.so. This change
ensures that libatest.so is built before any other targets that require it,
without creating a circular dependency.
This fix addresses the following warning:
make[4]: Entering directory 'tools/testing/selftests/alsa'
make[4]: Circular default_modconfig/kselftest/alsa/global-timer <- default_modconfig/kselftest/alsa/global-timer dependency dropped.
make[4]: Nothing to be done for 'all'.
make[4]: Leaving directory 'tools/testing/selftests/alsa'
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://patch.msgid.link/20241218025931.914164-1-lizhijian@fujitsu.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove extrenous fprintf
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20241218140018.15607-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.13-rc4).
No conflicts.
Adjacent changes:
drivers/net/ethernet/renesas/rswitch.h
32fd46f5b69e ("net: renesas: rswitch: remove speed from gwca structure")
922b4b955a03 ("net: renesas: rswitch: rework ts tags management")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: try the outer netns attribute in rtnl_get_peer_net()
- rust: net::phy fix module autoloading
Current release - new code bugs:
- phy: avoid undefined behavior in *_led_polarity_set()
- eth: octeontx2-pf: fix netdev memory leak in rvu_rep_create()
Previous releases - regressions:
- smc: check sndbuf_space again after NOSPACE flag is set in smc_poll
- ipvs: fix clamp() of ip_vs_conn_tab on small memory systems
- dsa: restore dsa_software_vlan_untag() ability to operate on
VLAN-untagged traffic
- eth:
- tun: fix tun_napi_alloc_frags()
- ionic: no double destroy workqueue
- idpf: trigger SW interrupt when exiting wb_on_itr mode
- rswitch: rework ts tags management
- team: fix feature exposure when no ports are present
Previous releases - always broken:
- core: fix repeated netlink messages in queue dump
- mdiobus: fix an OF node reference leak
- smc: check iparea_offset and ipv6_prefixes_cnt when receiving
proposal msg
- can: fix missed interrupts with m_can_pci
- eth: oa_tc6: fix infinite loop error when tx credits becomes 0"
* tag 'net-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
net: mctp: handle skb cleanup on sock_queue failures
net: mdiobus: fix an OF node reference leak
octeontx2-pf: fix error handling of devlink port in rvu_rep_create()
octeontx2-pf: fix netdev memory leak in rvu_rep_create()
psample: adjust size if rate_as_probability is set
netdev-genl: avoid empty messages in queue dump
net: dsa: restore dsa_software_vlan_untag() ability to operate on VLAN-untagged traffic
selftests: openvswitch: fix tcpdump execution
net: usb: qmi_wwan: add Quectel RG255C
net: phy: avoid undefined behavior in *_led_polarity_set()
netfilter: ipset: Fix for recursive locking warning
ipvs: Fix clamp() of ip_vs_conn_tab on small memory systems
can: m_can: fix missed interrupts with m_can_pci
can: m_can: set init flag earlier in probe
rtnetlink: Try the outer netns attribute in rtnl_get_peer_net().
net: netdevsim: fix nsim_pp_hold_write()
idpf: trigger SW interrupt when exiting wb_on_itr mode
idpf: add support for SW triggered interrupts
qed: fix possible uninit pointer read in qed_mcp_nvm_info_populate()
net: ethernet: bgmac-platform: fix an OF node reference leak
...
|
|
Add tests for the new FIB rule flow label selector. Test both good and bad
flows and with both input and output routes.
# ./fib_rule_tests.sh
IPv6 FIB rule tests
[...]
TEST: rule6 check: flowlabel redirect to table [ OK ]
TEST: rule6 check: flowlabel no redirect to table [ OK ]
TEST: rule6 del by pref: flowlabel redirect to table [ OK ]
TEST: rule6 check: iif flowlabel redirect to table [ OK ]
TEST: rule6 check: iif flowlabel no redirect to table [ OK ]
TEST: rule6 del by pref: iif flowlabel redirect to table [ OK ]
TEST: rule6 check: flowlabel masked redirect to table [ OK ]
TEST: rule6 check: flowlabel masked no redirect to table [ OK ]
TEST: rule6 del by pref: flowlabel masked redirect to table [ OK ]
TEST: rule6 check: iif flowlabel masked redirect to table [ OK ]
TEST: rule6 check: iif flowlabel masked no redirect to table [ OK ]
TEST: rule6 del by pref: iif flowlabel masked redirect to table [ OK ]
[...]
Tests passed: 268
Tests failed: 0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In get_uprobe_offset(), the call to procmap_query() use the constant
PROCMAP_QUERY_VMA_EXECUTABLE, even if PROCMAP_QUERY is not defined.
Define PROCMAP_QUERY_VMA_EXECUTABLE when PROCMAP_QUERY isn't.
Fixes: 4e9e07603ecd ("selftests/bpf: make use of PROCMAP_QUERY ioctl if available")
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20241218175724.578884-1-jmarchan@redhat.com
|
|
Currently, LoongArch LLVM does not support the constraint "o" and no plan
to support it, it only supports the similar constraint "m", so change the
constraints from "nor" in the "else" case to arch-specific "nmr" to avoid
the build error such as "unexpected asm memory constraint" for LoongArch.
Fixes: 630301b0d59d ("selftests/bpf: Add basic USDT selftests")
Suggested-by: Weining Lu <luweining@loongson.cn>
Suggested-by: Li Chen <chenli@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: stable@vger.kernel.org
Link: https://llvm.org/docs/LangRef.html#supported-constraint-code-list
Link: https://github.com/llvm/llvm-project/blob/main/llvm/lib/Target/LoongArch/LoongArchISelDAGToDAG.cpp#L172
Link: https://lore.kernel.org/bpf/20241219111506.20643-1-yangtiezhu@loongson.cn
|
|
Fix the way tcpdump is executed by:
- Using the right variable for the namespace. Currently the use of the
empty "ns" makes the command fail.
- Waiting until it starts to capture to ensure the interesting traffic
is caught on slow systems.
- Using line-buffered output to ensure logs are available when the test
is paused with "-p". Otherwise the last chunk of data might only be
written when tcpdump is killed.
Fixes: 74cc26f416b9 ("selftests: openvswitch: add interface support")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20241217211652.483016-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The sysctl tests for vm.memfd_noexec rely on the kernel to support PID
namespaces (i.e. the kernel is built with CONFIG_PID_NS=y). If the
kernel the test runs on does not support PID namespaces, the first sysctl
test will fail when attempting to spawn a new thread in a new PID
namespace, abort the test, preventing the remaining tests from being run.
This is not desirable, as not all kernels need PID namespaces, but can
still use the other features provided by memfd. Therefore, only run the
sysctl tests if the kernel supports PID namespaces. Otherwise, skip those
tests and emit an informative message to let the user know why the sysctl
tests are not being run.
Link: https://lkml.kernel.org/r/20241205192943.3228757-1-isaacmanjarres@google.com
Fixes: 11f75a01448f ("selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC")
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Reviewed-by: Jeff Xu <jeffxu@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove the temporary context variable `tctx` to simplify the code. use
the original context `ctx` directly in calls to `lsm_get_self_attr`,
eliminating redundancy without any functional changes.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Amit Vadhavana <av2082000@gmail.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
tcp/sendfile, tcp/limited-transmit, tcp/syscall_bad_arg
Use the standard import and testing method, as described in the
import of tcp/ecn and tcp/close , tcp/sack , tcp/tcp_info.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Soham Chakradeo <sohamch@google.com>
Link: https://patch.msgid.link/20241217185203.297935-5-sohamch.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp/blocking
Use the standard import and testing method, as described in the
import of tcp/ecn and tcp/close , tcp/sack , tcp/tcp_info.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Soham Chakradeo <sohamch@google.com>
Link: https://patch.msgid.link/20241217185203.297935-4-sohamch.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcp/timestamping
Use the standard import and testing method, as described in the
import of tcp/ecn , tcp/close , tcp/sack , tcp/tcp_info.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Soham Chakradeo <sohamch@google.com>
Link: https://patch.msgid.link/20241217185203.297935-3-sohamch.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Same as initial tests, import verbatim from
github.com/google/packetdrill, aside from:
- update `source ./defaults.sh` path to adjust for flat dir
- add SPDX headers
- remove author statements if any
- drop blank lines at EOF
Same test process as previous tests. Both with and without debug mode.
Recording the steps once:
make mrproper
vng --build \
--config tools/testing/selftests/net/packetdrill/config \
--config kernel/configs/debug.config
vng -v --run . --user root --cpus 4 -- \
make -C tools/testing/selftests TARGETS=net/packetdrill run_tests
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Soham Chakradeo <sohamch@google.com>
Link: https://patch.msgid.link/20241217185203.297935-2-sohamch.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Various fixes to Hyper-V tools in the kernel tree (Dexuan Cui, Olaf
Hering, Vitaly Kuznetsov)
- Fix a bug in the Hyper-V TSC page based sched_clock() (Naman Jain)
- Two bug fixes in the Hyper-V utility functions (Michael Kelley)
- Convert open-coded timeouts to secs_to_jiffies() in Hyper-V drivers
(Easwar Hariharan)
* tag 'hyperv-fixes-signed-20241217' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
tools/hv: reduce resource usage in hv_kvp_daemon
tools/hv: add a .gitignore file
tools/hv: reduce resouce usage in hv_get_dns_info helper
hv/hv_kvp_daemon: Pass NIC name to hv_get_dns_info as well
Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet
Drivers: hv: util: Don't force error code to ENODEV in util_probe()
tools/hv: terminate fcopy daemon if read from uio fails
drivers: hv: Convert open-coded timeouts to secs_to_jiffies()
tools: hv: change permissions of NetworkManager configuration file
x86/hyperv: Fix hv tsc page based sched_clock for hibernation
tools: hv: Fix a complier warning in the fcopy uio daemon
|
|
Both core-pkey.c and ptrace-pkey.c tests have
similar macro definitions, move them to "pkeys.h"
and remove the macro definitions from the C file.
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241216160257.87252-3-maddy@linux.ibm.com
|
|
./powerpc/ptrace/Makefile includes flags.mk.
In flags.mk, -I$(selfdir)/powerpc/include is
always included as part of CFLAGS. So it will
pick up the "pkeys.h" defined in powerpc/include.
ptrace-pkey.c test has macros defined which
are part of "pkeys.h" header file. Remove those
duplicates and include "pkeys.h"
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241216160257.87252-2-maddy@linux.ibm.com
|
|
./powerpc/ptrace/Makefile includes flags.mk. In flags.mk,
-I$(selfdir)/powerpc/include is always included as part of
CFLAGS. So it will pick up the "pkeys.h" defined in
powerpc/include.
core-pkey.c test has couple of macros defined which
are part of "pkeys.h" header file. Remove those
duplicates and include "pkeys.h"
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241216160257.87252-1-maddy@linux.ibm.com
|
|
When compiling the pointer masking tests with -Wall this warning
is present:
pointer_masking.c: In function ‘test_tagged_addr_abi_sysctl’:
pointer_masking.c:203:9: warning: ignoring return value of ‘pwrite’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
203 | pwrite(fd, &value, 1, 0); |
^~~~~~~~~~~~~~~~~~~~~~~~ pointer_masking.c:208:9: warning:
ignoring return value of ‘pwrite’ declared with attribute
‘warn_unused_result’ [-Wunused-result]
208 | pwrite(fd, &value, 1, 0);
I came across this on riscv64-linux-gnu-gcc (Ubuntu
11.4.0-1ubuntu1~22.04).
Fix this by checking that the number of bytes written equal the expected
number of bytes written.
Fixes: 7470b5afd150 ("riscv: selftests: Add a pointer masking test")
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241211-fix_warnings_pointer_masking_tests-v6-1-c7ae708fbd2f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Fix xen netfront crash (XSA-465) and avoid using the hypercall page
that doesn't do speculation mitigations (XSA-466)"
* tag 'xsa465+xsa466-6.13-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: remove hypercall page
x86/xen: use new hypercall functions instead of hypercall page
x86/xen: add central hypercall functions
x86/xen: don't do PV iret hypercall through hypercall page
x86/static-call: provide a way to do very early static-call updates
objtool/x86: allow syscall instruction
x86: make get_cpu_vendor() accessible from Xen code
xen/netfront: fix crash when removing device
|
|
In commit 03c7527e97f7 ("KVM: arm64: Do not allow ID_AA64MMFR0_EL1.ASIDbits
to be overridden") we made that bitfield in the ID registers unwritable
however the change neglected to make the corresponding update to set_id_regs
resulting in it failing:
ok 56 ID_AA64MMFR0_EL1_BIGEND
==== Test Assertion Failure ====
aarch64/set_id_regs.c:434: masks[idx] & ftr_bits[j].mask == ftr_bits[j].mask
pid=5566 tid=5566 errno=22 - Invalid argument
1 0x00000000004034a7: test_vm_ftr_id_regs at set_id_regs.c:434
2 0x0000000000401b53: main at set_id_regs.c:684
3 0x0000ffff8e6b7543: ?? ??:0
4 0x0000ffff8e6b7617: ?? ??:0
5 0x0000000000401e6f: _start at ??:?
not ok 8 selftests: kvm: set_id_regs # exit=254
Remove ID_AA64MMFR1_EL1.ASIDBITS from the set of bitfields we test for
writeability.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241216-kvm-arm64-fix-set-id-asidbits-v1-1-8b105b888fc3@kernel.org
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add selftests for pidfs file handles.
Link: https://lore.kernel.org/r/20241202-imstande-einsicht-d78753e1c632@brauner
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add new socket option, SO_RCVPRIORITY, to include SO_PRIORITY in the
ancillary data returned by recvmsg().
This is analogous to the existing support for SO_RCVMARK,
as implemented in commit 6fd1d51cfa253 ("net: SO_RCVMARK socket option
for SO_MARK with recvmsg()").
Reviewed-by: Willem de Bruijn <willemb@google.com>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-5-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend cmsg_sender.c with a new option '-Q' to send SO_PRIORITY
ancillary data.
cmsg_so_priority.sh script added to validate SO_PRIORITY behavior
by creating VLAN device with egress QoS mapping and testing packet
priorities using flower filters. Verify that packets with different
priorities are correctly matched and counted by filters for multiple
protocols and IP versions.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Link: https://patch.msgid.link/20241213084457.45120-4-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sanity check netlink dumps, to make sure dumps don't have
repeated entries or gaps in IDs.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This test already catches a netlink bug fixed by this series,
but only when running on HW with many queues. Make sure the
netdevsim instance created has a lot of queues, and constrain
the size of the recv_buffer used by netlink.
While at it test both rx and tx queues.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
recv_size parameter allows constraining the buffer size for dumps.
It's useful in testing kernel handling of dump continuation,
IOW testing dumps which span multiple skbs.
Let the tests set this parameter when initializing the YNL family.
Keep the normal default, we don't want tests to unintentionally
behave very differently than normal code.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20241213152244.3080955-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the previous patch we've updated AT_EMPTY_PATH execs to use the dentry
filename. Test for this and just to be sure keeps working with symlinks,
which was a concern in [1], I've added a test for that as well.
The test itself is a bit ugly, because the existing check_execveat_fail()
helpers use a hardcoded envp and argv, and we want to "pass" things via the
environment to test various argument values, but it seemed cleaner than
passing one in everywhere in all the existing tests.
Output looks like:
ok 51 Check success of execveat(6, 'home/tycho/packages/...yyyyyyyyyyyyyyyyyyyy', 0)...
# Check execveat(AT_EMPTY_PATH)'s comm is execveat
ok 52 Check success of execveat(9, '', 4096)...
# Check execveat(AT_EMPTY_PATH)'s comm is execveat
ok 53 Check success of execveat(11, '', 4096)...
# Check execveat(AT_EMPTY_PATH)'s comm is execveat
[ 25.579272] process 'execveat' launched '/dev/fd/9' with NULL argv: empty string added
ok 54 Check success of execveat(9, '', 4096)...
Link: https://lore.kernel.org/all/20240925.152228-private.conflict.frozen.trios-TdUGhuI5Sb4v@cyphar.com/ [1]
Signed-off-by: Tycho Andersen <tandersen@netflix.com>
Link: https://lore.kernel.org/r/20241030203732.248767-2-tycho@tycho.pizza
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
test_xdp_meta.sh can't be used by the BPF CI.
Migrate test_xdp_meta.sh in a new test case in xdp_context_test_run.c.
It uses the same BPF programs located in progs/test_xdp_meta.c and the
same network topology.
Remove test_xdp_meta.sh and its Makefile entry.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241213-xdp_meta-v2-2-634582725b90@bootlin.com
|
|
SEC("t") and SEC("x") can't be loaded by the __load() helper.
Rename these sections SEC("tc") and SEC("xdp") so they can be
interpreted by the __load() helper in upcoming patch.
Update the test_xdp_meta.sh to fit these new names.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20241213-xdp_meta-v2-1-634582725b90@bootlin.com
|
|
Commit 'cpupower: Make TSC read per CPU for Mperf monitor' (c2adb1877b7)
changes TSC counter reads per cpu, but left time diff global (from start
of all cpus to end of all cpus), thus diff(time) is too large for a
cpu's tsc counting, resulting in far less than acutal TSC_Mhz and thus
`cpupower monitor` showing far less than actual cpu realtime frequency.
/proc/cpuinfo shows frequency:
cat /proc/cpuinfo | egrep -e 'processor' -e 'MHz'
...
processor : 171
cpu MHz : 4108.498
...
before fix (System 100% busy):
| Mperf || Idle_Stats
CPU| C0 | Cx | Freq || POLL | C1 | C2
171| 0.77| 99.23| 2279|| 0.00| 0.00| 0.00
after fix (System 100% busy):
| Mperf || Idle_Stats
CPU| C0 | Cx | Freq || POLL | C1 | C2
171| 0.46| 99.54| 4095|| 0.00| 0.00| 0.00
Fixes: c2adb1877b76 ("cpupower: Make TSC read per CPU for Mperf monitor")
Signed-off-by: He Rongguang <herongguang@linux.alibaba.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Test the kernel's ability to:
- update the key (but not the version or cipher), only for TLS1.3
- pause decryption after receiving a KeyUpdate message, until a new
RX key has been provided
- reflect the pause/non-readable socket in poll()
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows us to generate different keys, so that we can test that
rekey is using the correct one.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the correct attribute space for sub-message key lookup in nested
attributes when adding attributes. This fixes rt_link where the "kind"
key and "data" sub-message are nested attributes in "linkinfo".
For example:
./tools/net/ynl/cli.py \
--create \
--spec Documentation/netlink/specs/rt_link.yaml \
--do newlink \
--json '{"link": 99,
"linkinfo": { "kind": "vlan", "data": {"id": 4 } }
}'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Fixes: ab463c4342d1 ("tools/net/ynl: Add support for encoding sub-messages")
Link: https://patch.msgid.link/20241213130711.40267-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull bpf fixes from Daniel Borkmann:
- Fix a bug in the BPF verifier to track changes to packet data
property for global functions (Eduard Zingerman)
- Fix a theoretical BPF prog_array use-after-free in RCU handling of
__uprobe_perf_func (Jann Horn)
- Fix BPF tracing to have an explicit list of tracepoints and their
arguments which need to be annotated as PTR_MAYBE_NULL (Kumar
Kartikeya Dwivedi)
- Fix a logic bug in the bpf_remove_insns code where a potential error
would have been wrongly propagated (Anton Protopopov)
- Avoid deadlock scenarios caused by nested kprobe and fentry BPF
programs (Priya Bala Govindasamy)
- Fix a bug in BPF verifier which was missing a size check for
BTF-based context access (Kumar Kartikeya Dwivedi)
- Fix a crash found by syzbot through an invalid BPF prog_array access
in perf_event_detach_bpf_prog (Jiri Olsa)
- Fix several BPF sockmap bugs including a race causing a refcount
imbalance upon element replace (Michal Luczaj)
- Fix a use-after-free from mismatching BPF program/attachment RCU
flavors (Jann Horn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (23 commits)
bpf: Avoid deadlock caused by nested kprobe and fentry bpf programs
selftests/bpf: Add tests for raw_tp NULL args
bpf: Augment raw_tp arguments with PTR_MAYBE_NULL
bpf: Revert "bpf: Mark raw_tp arguments with PTR_MAYBE_NULL"
selftests/bpf: Add test for narrow ctx load for pointer args
bpf: Check size for BTF-based ctx access of pointer members
selftests/bpf: extend changes_pkt_data with cases w/o subprograms
bpf: fix null dereference when computing changes_pkt_data of prog w/o subprogs
bpf: Fix theoretical prog_array UAF in __uprobe_perf_func()
bpf: fix potential error return
selftests/bpf: validate that tail call invalidates packet pointers
bpf: consider that tail calls invalidate packet pointers
selftests/bpf: freplace tests for tracking of changes_packet_data
bpf: check changes_pkt_data property for extension programs
selftests/bpf: test for changing packet data from global functions
bpf: track changes_pkt_data property for global functions
bpf: refactor bpf_helper_changes_pkt_data to use helper number
bpf: add find_containing_subprog() utility function
bpf,perf: Fix invalid prog_array access in perf_event_detach_bpf_prog
bpf: Fix UAF via mismatching bpf_prog/attachment RCU flavors
...
|
|
'srcu.2024.12.14a' and 'torture-test.2024.12.14a' into rcu-merge.2024.12.14a
fixes.2024.12.14a: RCU fixes
rcutorture.2024.12.14a: Torture-test updates
srcu.2024.12.14a: SRCU updates
torture-test.2024.12.14a: Adding an extra test, fixes
|
|
This commit adds the rcutorture.preempt_duration module parameter to
rcutorture's TREE03.boot parameter list in order to better test preemption
of RCU read-side critical sections.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
Currently, a system that stops responding at the wrong time will hang
kvm-remote.sh. This can happen when the system in question is forced
offline for maintenance, and there is currently no way for the user
to kick this script into moving ahead. This commit therefore causes
kvm-remote.sh to wait at most 15 minutes for a non-responsive system,
that is, a system for which ssh gives an exit code of 255.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
|
|
Add tests to ensure that arguments are correctly marked based on their
specified positions, and whether they get marked correctly as maybe
null. For modules, all tracepoint parameters should be marked
PTR_MAYBE_NULL by default.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241213221929.3495062-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Arguments to a raw tracepoint are tagged as trusted, which carries the
semantics that the pointer will be non-NULL. However, in certain cases,
a raw tracepoint argument may end up being NULL. More context about this
issue is available in [0].
Thus, there is a discrepancy between the reality, that raw_tp arguments can
actually be NULL, and the verifier's knowledge, that they are never NULL,
causing explicit NULL check branch to be dead code eliminated.
A previous attempt [1], i.e. the second fixed commit, was made to
simulate symbolic execution as if in most accesses, the argument is a
non-NULL raw_tp, except for conditional jumps. This tried to suppress
branch prediction while preserving compatibility, but surfaced issues
with production programs that were difficult to solve without increasing
verifier complexity. A more complete discussion of issues and fixes is
available at [2].
Fix this by maintaining an explicit list of tracepoints where the
arguments are known to be NULL, and mark the positional arguments as
PTR_MAYBE_NULL. Additionally, capture the tracepoints where arguments
are known to be ERR_PTR, and mark these arguments as scalar values to
prevent potential dereference.
Each hex digit is used to encode NULL-ness (0x1) or ERR_PTR-ness (0x2),
shifted by the zero-indexed argument number x 4. This can be represented
as follows:
1st arg: 0x1
2nd arg: 0x10
3rd arg: 0x100
... and so on (likewise for ERR_PTR case).
In the future, an automated pass will be used to produce such a list, or
insert __nullable annotations automatically for tracepoints. Each
compilation unit will be analyzed and results will be collated to find
whether a tracepoint pointer is definitely not null, maybe null, or an
unknown state where verifier conservatively marks it PTR_MAYBE_NULL.
A proof of concept of this tool from Eduard is available at [3].
Note that in case we don't find a specification in the raw_tp_null_args
array and the tracepoint belongs to a kernel module, we will
conservatively mark the arguments as PTR_MAYBE_NULL. This is because
unlike for in-tree modules, out-of-tree module tracepoints may pass NULL
freely to the tracepoint. We don't protect against such tracepoints
passing ERR_PTR (which is uncommon anyway), lest we mark all such
arguments as SCALAR_VALUE.
While we are it, let's adjust the test raw_tp_null to not perform
dereference of the skb->mark, as that won't be allowed anymore, and make
it more robust by using inline assembly to test the dead code
elimination behavior, which should still stay the same.
[0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb
[1]: https://lore.kernel.org/all/20241104171959.2938862-1-memxor@gmail.com
[2]: https://lore.kernel.org/bpf/20241206161053.809580-1-memxor@gmail.com
[3]: https://github.com/eddyz87/llvm-project/tree/nullness-for-tracepoint-params
Reported-by: Juri Lelli <juri.lelli@redhat.com> # original bug
Reported-by: Manu Bretelle <chantra@meta.com> # bugs in masking fix
Fixes: 3f00c5239344 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Fixes: cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL")
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241213221929.3495062-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch reverts commit
cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL"). The
patch was well-intended and meant to be as a stop-gap fixing branch
prediction when the pointer may actually be NULL at runtime. Eventually,
it was supposed to be replaced by an automated script or compiler pass
detecting possibly NULL arguments and marking them accordingly.
However, it caused two main issues observed for production programs and
failed to preserve backwards compatibility. First, programs relied on
the verifier not exploring == NULL branch when pointer is not NULL, thus
they started failing with a 'dereference of scalar' error. Next,
allowing raw_tp arguments to be modified surfaced the warning in the
verifier that warns against reg->off when PTR_MAYBE_NULL is set.
More information, context, and discusson on both problems is available
in [0]. Overall, this approach had several shortcomings, and the fixes
would further complicate the verifier's logic, and the entire masking
scheme would have to be removed eventually anyway.
Hence, revert the patch in preparation of a better fix avoiding these
issues to replace this commit.
[0]: https://lore.kernel.org/bpf/20241206161053.809580-1-memxor@gmail.com
Reported-by: Manu Bretelle <chantra@meta.com>
Fixes: cb4158ce8ec8 ("bpf: Mark raw_tp arguments with PTR_MAYBE_NULL")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241213221929.3495062-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|