summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2025-06-13Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "ARM: - Rework of system register accessors for system registers that are directly writen to memory, so that sanitisation of the in-memory value happens at the correct time (after the read, or before the write). For convenience, RMW-style accessors are also provided. - Multiple fixes for the so-called "arch-timer-edge-cases' selftest, which was always broken. x86: - Make KVM_PRE_FAULT_MEMORY stricter for TDX, allowing userspace to pass only the "untouched" addresses and flipping the shared/private bit in the implementation. - Disable SEV-SNP support on initialization failure * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86/mmu: Reject direct bits in gpa passed to KVM_PRE_FAULT_MEMORY KVM: x86/mmu: Embed direct bits into gpa for KVM_PRE_FAULT_MEMORY KVM: SEV: Disable SEV-SNP support on initialization failure KVM: arm64: selftests: Determine effective counter width in arch_timer_edge_cases KVM: arm64: selftests: Fix xVAL init in arch_timer_edge_cases KVM: arm64: selftests: Fix thread migration in arch_timer_edge_cases KVM: arm64: selftests: Fix help text for arch_timer_edge_cases KVM: arm64: Make __vcpu_sys_reg() a pure rvalue operand KVM: arm64: Don't use __vcpu_sys_reg() to get the address of a sysreg KVM: arm64: Add RMW specific sysreg accessor KVM: arm64: Add assignment-specific sysreg accessor
2025-06-12mm: add mmap_prepare() compatibility layer for nested file systemsLorenzo Stoakes
Nested file systems, that is those which invoke call_mmap() within their own f_op->mmap() handlers, may encounter underlying file systems which provide the f_op->mmap_prepare() hook introduced by commit c84bf6dd2b83 ("mm: introduce new .mmap_prepare() file callback"). We have a chicken-and-egg scenario here - until all file systems are converted to using .mmap_prepare(), we cannot convert these nested handlers, as we can't call f_op->mmap from an .mmap_prepare() hook. So we have to do it the other way round - invoke the .mmap_prepare() hook from an .mmap() one. in order to do so, we need to convert VMA state into a struct vm_area_desc descriptor, invoking the underlying file system's f_op->mmap_prepare() callback passing a pointer to this, and then setting VMA state accordingly and safely. This patch achieves this via the compat_vma_mmap_prepare() function, which we invoke from call_mmap() if f_op->mmap_prepare() is specified in the passed in file pointer. We place the fundamental logic into mm/vma.h where VMA manipulation belongs. We also update the VMA userland tests to accommodate the changes. The compat_vma_mmap_prepare() function and its associated machinery is temporary, and will be removed once the conversion of file systems is complete. We carefully place this code so it can be used with CONFIG_MMU and also with cutting edge nommu silicon. [akpm@linux-foundation.org: export compat_vma_mmap_prepare tp fix build] [lorenzo.stoakes@oracle.com: remove unused declarations] Link: https://lkml.kernel.org/r/ac3ae324-4c65-432a-8c6d-2af988b18ac8@lucifer.local Link: https://lkml.kernel.org/r/20250609165749.344976-1-lorenzo.stoakes@oracle.com Fixes: c84bf6dd2b83 ("mm: introduce new .mmap_prepare() file callback"). Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reported-by: Jann Horn <jannh@google.com> Closes: https://lore.kernel.org/linux-mm/CAG48ez04yOEVx1ekzOChARDDBZzAKwet8PEoPM4Ln3_rk91AzQ@mail.gmail.com/ Reviewed-by: Pedro Falcato <pfalcato@suse.de> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: Liam Howlett <liam.howlett@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-06-12Merge tag 'net-6.16-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth and wireless. Current release - regressions: - af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD Current release - new code bugs: - eth: airoha: correct enable mask for RX queues 16-31 - veth: prevent NULL pointer dereference in veth_xdp_rcv when peer disappears under traffic - ipv6: move fib6_config_validate() to ip6_route_add(), prevent invalid routes Previous releases - regressions: - phy: phy_caps: don't skip better duplex match on non-exact match - dsa: b53: fix untagged traffic sent via cpu tagged with VID 0 - Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused transient packet loss, exact reason not fully understood, yet Previous releases - always broken: - net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6) - sched: sfq: fix a potential crash on gso_skb handling - Bluetooth: intel: improve rx buffer posting to avoid causing issues in the firmware - eth: intel: i40e: make reset handling robust against multiple requests - eth: mlx5: ensure FW pages are always allocated on the local NUMA node, even when device is configure to 'serve' another node - wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850, prevent kernel crashes - wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request() for 3 sec if fw_stats_done is not set" * tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits) selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context net: ethtool: Don't check if RSS context exists in case of context 0 af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD. ipv6: Move fib6_config_validate() to ip6_route_add(). net: drv: netdevsim: don't napi_complete() from netpoll net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get() veth: prevent NULL pointer dereference in veth_xdp_rcv net_sched: remove qdisc_tree_flush_backlog() net_sched: ets: fix a race in ets_qdisc_change() net_sched: tbf: fix a race in tbf_change() net_sched: red: fix a race in __red_change() net_sched: prio: fix a race in prio_tune() net_sched: sch_sfq: reject invalid perturb period net: phy: phy_caps: Don't skip better duplex macth on non-exact match MAINTAINERS: Update Kuniyuki Iwashima's email address. selftests: net: add test case for NAT46 looping back dst net: clear the dst when changing skb protocol net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper net/mlx5e: Fix leak of Geneve TLV option object net/mlx5: HWS, make sure the uplink is the last destination ...
2025-06-12selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS ↵Gal Pressman
context Add test_rss_default_context_rule() to verify that ntuple rules can correctly direct traffic to the default RSS context (context 0). The test creates two ntuple rules with explicit location priorities: - A high-priority rule (loc 0) directing specific port traffic to context 0. - A low-priority rule (loc 1) directing all other TCP traffic to context 1. This validates that: 1. Rules targeting the default context function properly. 2. Traffic steering works as expected when mixing default and additional RSS contexts. The test was written by AI, and reviewed by humans. Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://patch.msgid.link/20250612071958.1696361-3-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11selftests/mm: skip failed memfd setups in gup_longtermMark Brown
Unlike the other cases gup_longterm's memfd tests previously skipped the test when failing to set up the file descriptor to test. Restore this behavior to avoid hitting failures when hugetlb isn't configured. Link: https://lkml.kernel.org/r/20250605-selftest-mm-gup-longterm-tweaks-v1-1-2fae34b05958@kernel.org Fixes: 66bce7afbaca ("selftests/mm: fix test result reporting in gup_longterm") Signed-off-by: Mark Brown <broonie@kernel.org> Reported-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Closes: https://lkml.kernel.org/r/a76fc252-0fe3-4d4b-a9a1-4a2895c2680d@lucifer.local Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2025-06-11Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfLinus Torvalds
Pull BPF fixes from Alexei Starovoitov - Fix libbpf backward compatibility (Andrii Nakryiko) - Add Stanislav Fomichev as bpf/net reviewer - Fix resolve_btfid build when cross compiling (Suleiman Souhlal) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: MAINTAINERS: Add myself as bpf networking reviewer tools/resolve_btfids: Fix build when cross compiling kernel with clang. libbpf: Handle unsupported mmap-based /sys/kernel/btf/vmlinux correctly
2025-06-11selftests: net: add test case for NAT46 looping back dstJakub Kicinski
Simple test for crash involving multicast loopback and stale dst. Reuse exising NAT46 program. Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250610001245.1981782-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-06-11perf thread: Ensure comm_lock held for comm_listIan Rogers
Add thread safety annotations for comm_list and add locking for two instances where the list is accessed without the lock held (in contradiction to ____thread__set_comm()). Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250529192206.971199-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-11Merge tag 'kvmarm-fixes-6.16-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.16, take #2 - Rework of system register accessors for system registers that are directly writen to memory, so that sanitisation of the in-memory value happens at the correct time (after the read, or before the write). For convenience, RMW-style accessors are also provided. - Multiple fixes for the so-called "arch-timer-edge-cases' selftest, which was always broken.
2025-06-10tools/resolve_btfids: Fix build when cross compiling kernel with clang.Suleiman Souhlal
When cross compiling the kernel with clang, we need to override CLANG_CROSS_FLAGS when preparing the step libraries. Prior to commit d1d096312176 ("tools: fix annoying "mkdir -p ..." logs when building tools in parallel"), MAKEFLAGS would have been set to a value that wouldn't set a value for CLANG_CROSS_FLAGS, hiding the fact that we weren't properly overriding it. Fixes: 56a2df7615fa ("tools/resolve_btfids: Compile resolve_btfids as host program") Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20250606074538.1608546-1-suleiman@google.com
2025-06-09perf: Fix libjvmti.c sign compare errorYuzhuo Jing
Fix the compile errors when compiling with -Werror=sign-compare. This is a follow-up patch to a previous patch series for a separate issue. Link: https://lore.kernel.org/lkml/aC9lXhPFcs5fkHWH@x1/ Signed-off-by: Yuzhuo Jing <yuzhuo@google.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250604173632.2362759-1-yuzhuo@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf script: perf script tests fails with segfaultAditya Bodkhe
pert script tests fails with segmentation fault as below: 92: perf script tests: --- start --- test child forked, pid 103769 DB test [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.012 MB /tmp/perf-test-script.7rbftEpOzX/perf.data (9 samples) ] /usr/libexec/perf-core/tests/shell/script.sh: line 35: 103780 Segmentation fault (core dumped) perf script -i "${perfdatafile}" -s "${db_test}" --- Cleaning up --- ---- end(-1) ---- 92: perf script tests : FAILED! Backtrace pointed to : #0 0x0000000010247dd0 in maps.machine () #1 0x00000000101d178c in db_export.sample () #2 0x00000000103412c8 in python_process_event () #3 0x000000001004eb28 in process_sample_event () #4 0x000000001024fcd0 in machines.deliver_event () #5 0x000000001025005c in perf_session.deliver_event () #6 0x00000000102568b0 in __ordered_events__flush.part.0 () #7 0x0000000010251618 in perf_session.process_events () #8 0x0000000010053620 in cmd_script () #9 0x00000000100b5a28 in run_builtin () #10 0x00000000100b5f94 in handle_internal_command () #11 0x0000000010011114 in main () Further investigation reveals that this occurs in the `perf script tests`, because it uses `db_test.py` script. This script sets `perf_db_export_mode = True`. With `perf_db_export_mode` enabled, if a sample originates from a hypervisor, perf doesn't set maps for "[H]" sample in the code. Consequently, `al->maps` remains NULL when `maps__machine(al->maps)` is called from `db_export__sample`. As al->maps can be NULL in case of Hypervisor samples , use thread->maps because even for Hypervisor sample, machine should exist. If we don't have machine for some reason, return -1 to avoid segmentation fault. Reported-by: Disha Goel <disgoel@linux.ibm.com> Signed-off-by: Aditya Bodkhe <aditya.b1@linux.ibm.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Disha Goel <disgoel@linux.ibm.com> Link: https://lore.kernel.org/r/20250429065132.36839-1-adityab1@linux.ibm.com Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf test trace: Change the regex pattern in the struct testHoward Chu
Ian mentioned a reliably occurred failure in the trace_btf_general test where he obtained trace output of: sleep/279619 clock_nanosleep(0, 0, {1,1,}, 0x7ffcd47b6450) = 0 But the regex pattern used for verification is "^sleep/[0-9]+ clock_nanosleep\(0, 0, \{1,\}, ..." This lead to a mismatch. The reason is, different sleep commands use different timespec data to call clock_nanosleep, on my machine, the value of tv_nsec is 0. ~~~ $ sudo /tmp/perf/perf trace -e clock_nanosleep -- sleep 1 0.000 (1000.196 ms): sleep/54261 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7ffe13529550) = 0 ~~~ While Ian had this trace log: ~~~ $ sudo /tmp/perf/perf trace -e clock_nanosleep -- sleep 1 0.000 (1000.208 ms): sleep/1710732 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 1 }, rmtp: 0x7ffc091f4090) = 0 ~~~ Because sleep's behavior of setting 'tv_nsec' is not certain, and tv_sec is most definitely 1, this patch relaxes the key regex pattern to '\{1,.*\}' for a better chance of matching. Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20250528191148.89118-7-howardchu95@gmail.com Reported-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf test trace: Use --sort-events in BTF general testsHoward Chu
Without the '--sort-events' flag, perf trace doesn't receive and process events based on their arrival time, thus PERF_RECORD_COMM event that assigns the correct comm to a PID, may be delivered and processed after regular samples, causing trace outputs not having a 'comm', e.g. 'mv', instead, having the default PID placeholder, e.g. ':14514'. Hopefully this answers Namhyung's question in [1]. You can simply justify the statement with this diff: [2]. Now, simply run this command multiple times: $ touch /tmp/file1 && sudo /tmp/perf trace -e renameat* -- mv /tmp/file1 /tmp/file2 && rm -f /tmp/file2 And you should see two types of results: $ touch /tmp/file1 && sudo /tmp/perf trace -e renameat* -- mv /tmp/file1 /tmp/file2 && rm -f /tmp/file2 [debug] deliver [debug] machine__process_comm_event [OVERRIDE] old :1221169 new mv str mv [debug] deliver [debug] deliver [debug] deliver [debug] deliver [debug] deliver [debug] deliver [debug] deliver [debug] deliver [debug] deliver [debug] deliver 0.000 ( 0.013 ms): mv/1221169 renameat2(olddfd: CWD, oldname: "/tmp/file1", newdfd: CWD, newname: "/tmp/file2", flags: NOREPLACE) = 0 [debug] deliver $ touch /tmp/file1 && sudo /tmp/perf trace -e renameat* -- mv /tmp/file1 /tmp/file2 && rm -f /tmp/file2 [debug] deliver [debug] deliver [debug] deliver [debug] deliver [debug] deliver [debug] deliver [debug] deliver 0.000 ( 0.014 ms): :1221398/1221398 renameat2(olddfd: CWD, oldname: "/tmp/file1", newdfd: CWD, newname: "/tmp/file2", flags: NOREPLACE) = 0 [debug] deliver [debug] deliver [debug] machine__process_comm_event [OVERRIDE] old :1221398 new mv str mv [debug] deliver [debug] deliver [debug] deliver Anyway, use --sort-events in BTF general tests to avoid :PID, a comm is preferred. [1]: https://lore.kernel.org/linux-perf-users/Z_AeswETE5xLcPT8@google.com/ [2]: https://gist.githubusercontent.com/Sberm/6b72b2a1cf1c62244f1f996481769baf/raw/529667bd74a2e7e1953bbd4be545bf875da8a3e7/unsorted.patch Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20250528191148.89118-6-howardchu95@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf test trace: Remove set -e for BTF general testsHoward Chu
Remove set -e and print error messages in BTF general tests. Before: $ sudo /tmp/perf test btf -vv 108: perf trace BTF general tests: 108: perf trace BTF general tests : Running --- start --- test child forked, pid 889299 Checking if vmlinux BTF exists Testing perf trace's string augmentation String augmentation test failed ---- end(-1) ---- 108: perf trace BTF general tests : FAILED! After: $ sudo /tmp/perf test btf -vv 108: perf trace BTF general tests: 108: perf trace BTF general tests : Running --- start --- test child forked, pid 886551 Checking if vmlinux BTF exists Testing perf trace's string augmentation String augmentation test failed, output: :886566/886566 renameat2(CWD, "/tmp/file1_RcMa", CWD, "/tmp/file2_RcMa", NOREPLACE) = 0---- end(-1) ---- 108: perf trace BTF general tests : FAILED! Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20250528191148.89118-5-howardchu95@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf test trace: Stop tracing hrtimer_setup event in trace enum testHoward Chu
The event 'timer:hrtimer_setup' is relatively new, for older kernels, perf trace enum tests won't run as the event 'timer:hrtimer_setup' cannot be found. It was originally called 'timer:hrtimer_init', before being renamed in: commit 244132c4e577 ("tracing/timers: Rename the hrtimer_init event to hrtimer_setup") Using timer:hrtimer_start should be enough for current testing, and hopefully 'start' won't be renamed in the future. Before: $ sudo /tmp/perf test enum -vv 107: perf trace enum augmentation tests: 107: perf trace enum augmentation tests : Running --- start --- test child forked, pid 786187 Checking if vmlinux exists Tracing syscall landlock_add_rule Tracing non-syscall tracepoint timer:hrtimer_setup,timer:hrtimer_start [tracepoint failure] Failed to trace timer:hrtimer_setup,timer:hrtimer_start tracepoint, output: event syntax error: 'timer:hrtimer_setup,timer:hrtimer_start' \___ unknown tracepoint Error: File /sys/kernel/tracing//events/timer/hrtimer_setup not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events ---- end(-1) ---- 107: perf trace enum augmentation tests : FAILED! After: $ sudo /tmp/perf test enum -vv 107: perf trace enum augmentation tests: 107: perf trace enum augmentation tests : Running --- start --- test child forked, pid 808547 Checking if vmlinux exists Tracing syscall landlock_add_rule Tracing non-syscall tracepoint timer:hrtimer_start ---- end(0) ---- 107: perf trace enum augmentation tests : Ok Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20250528191148.89118-4-howardchu95@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf test trace: Remove set -e and print trace test's error messagesHoward Chu
Currently perf test utilizes the set -e option in shell that exit immediately if a command exits with a non-zero status, this prevents further error handling and introduces ambiguity. This patch removes set -e and prints the error message after invoking perf trace during perf tests. In my case, the command that exits with a non-zero status is perf trace instead of grep, because it can't find the 'timer:hrtimer_setup' tracepoint, see below. Before: $ sudo /tmp/perf test enum -vv 107: perf trace enum augmentation tests: 107: perf trace enum augmentation tests : Running --- start --- test child forked, pid 783533 Checking if vmlinux exists Tracing syscall landlock_add_rule Tracing non-syscall tracepoint syscall ---- end(-1) ---- 107: perf trace enum augmentation tests : FAILED! After: $ sudo /tmp/perf test enum -vv 107: perf trace enum augmentation tests: 107: perf trace enum augmentation tests : Running --- start --- test child forked, pid 851658 Checking if vmlinux exists Tracing syscall landlock_add_rule Tracing non-syscall tracepoint timer:hrtimer_setup,timer:hrtimer_start [tracepoint failure] Failed to trace tracepoint timer:hrtimer_setup,timer:hrtimer_start, output: event syntax error: 'timer:hrtimer_setup,timer:hrtimer_start' \___ unknown tracepoint Error: File /sys/kernel/tracing//events/timer/hrtimer_setup not found. Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?. Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events---- end(-1) ---- 107: perf trace enum augmentation tests : FAILED! Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20250528191148.89118-3-howardchu95@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf test trace: Use shell's -f flag to check if vmlinux existsHoward Chu
To match the style of the existing codebase, no functional changes were applied. Signed-off-by: Howard Chu <howardchu95@gmail.com> Tested-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20250528191148.89118-2-howardchu95@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf trace: Remove --map-dump documentationHoward Chu
The --map-dump option was removed in 5e6da6be3082 ("perf trace: Migrate BPF augmentation to use a skeleton"), this patch removes its remaining documentation. Fixes: 5e6da6be3082 ("perf trace: Migrate BPF augmentation to use a skeleton") Signed-off-by: Howard Chu <howardchu95@gmail.com> Link: https://lore.kernel.org/r/20250601173252.717780-1-howardchu95@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09tools/build: Remove some unused libbpf pre-1.0 feature test logicIan Rogers
Commit 76a97cf2e169 ("perf build: Remove libbpf pre-1.0 feature tests") removed the libbpf feature test logic used by perf in favor of using LIBBPF_MAJOR_VERSION. Remove some build targets that should have been removed as part of that clean up. Fixes: 76a97cf2e169 ("perf build: Remove libbpf pre-1.0 feature tests") Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250603221358.2562167-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf thread_map: Remove uid optionsIan Rogers
Now the target doesn't have a uid, it is handled through BPF filters, remove the uid options to thread_map creation. Tidy up the functions used in tests to avoid passing unused arguments. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250604174545.2853620-11-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf target: Remove uid from targetIan Rogers
Gathering threads with a uid by scanning /proc is inherently racy leading to perf_event_open failures that quit perf. All users of the functionality now use BPF filters, so remove uid and uid_str from target. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250604174545.2853620-10-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf bench evlist-open-close: Switch user option to use BPF filterIan Rogers
Finding user processes by scanning /proc is inherently racy and results in perf_event_open failures. Use a BPF filter to drop samples where the uid doesn't match. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250604174545.2853620-9-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf trace: Switch user option to use BPF filterIan Rogers
Finding user processes by scanning /proc is inherently racy and results in perf_event_open failures. Use a BPF filter to drop samples where the uid doesn't match. Ensure adding the BPF filter forces system-wide. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250604174545.2853620-8-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf top: Switch user option to use BPF filterIan Rogers
Finding user processes by scanning /proc is inherently racy and results in perf_event_open failures. Use a BPF filter to drop samples where the uid doesn't match. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250604174545.2853620-7-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf tests record: Add basic uid filtering testIan Rogers
Based on the system-wide test with changes around how failure is handled as BPF permissions are a bigger issue than perf event paranoia. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250604174545.2853620-6-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf record: Switch user option to use BPF filterIan Rogers
Finding user processes by scanning /proc is inherently racy and results in perf_event_open failures. Use a BPF filter to drop samples where the uid doesn't match. Ensure adding the BPF filter forces system-wide. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250604174545.2853620-5-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf parse-events: Add parse_uid_filter helperIan Rogers
Add parse_uid_filter filter as a helper to parse_filter, that constructs a uid filter string. As uid filters don't work with tracepoint filters, add a is_possible_tp_filter function so the tracepoint filter isn't attempted for tracepoint evsels. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250604174545.2853620-4-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf target: Separate parse_uid into its own functionIan Rogers
Allow parse_uid to be called without a struct target. Rather than have two errors, remove TARGET_ERRNO__USER_NOT_FOUND and use TARGET_ERRNO__INVALID_UID as the handling is identical. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250604174545.2853620-3-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf parse-events filter: Use evsel__find_pmuIan Rogers
Rather than manually scanning PMUs, use evsel__find_pmu that can use the PMU set during event parsing. Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250604174545.2853620-2-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09perf bpf-filter: Improve error messagesNamhyung Kim
The BPF filter needs libbpf/BPF-skeleton support and root privilege. Add error messages to help users understand the problem easily. When it's not build with BPF support (make BUILD_BPF_SKEL=0). $ sudo perf record -e cycles --filter "pid != 0" true Error: BPF filter is requested but perf is not built with BPF. Please make sure to build with libbpf and BPF skeleton. Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] --filter <filter> event filter When it supports BPF but runs without root or CAP_BPF. Note that it also checks pinned BPF filters. $ perf record -e cycles --filter "pid != 0" -o /dev/null true Error: BPF filter only works for users with the CAP_BPF capability! Please run 'perf record --setup-filter pin' as root first. Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] --filter <filter> event filter Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250604174835.1852481-1-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-06-09cpupower: split unitdir from libdir in MakefileFrancesco Poli (wintermute)
Improve the installation procedure for the systemd service unit 'cpupower.service', to be more flexible. Some distros install libraries to /usr/lib64/, but systemd service units have to be installed to /usr/lib/systemd/system: as a consequence, the installation procedure should not assume that systemd service units can be installed to ${libdir}/systemd/system ... Define a dedicated variable ("unitdir") in the Makefile. Link: https://lore.kernel.org/linux-pm/260b6d79-ab61-43b7-a0eb-813e257bc028@leemhuis.info/T/#m0601940ab439d5cbd288819d2af190ce59e810e6 Fixes: 9c70b779ad91 ("cpupower: add a systemd service to run cpupower") Link: https://lore.kernel.org/r/20250521211656.65646-1-invernomuto@paranoici.org Signed-off-by: Francesco Poli (wintermute) <invernomuto@paranoici.org> Tested-by: Thorsten Leemhuis <linux@leemhuis.info> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-06-09selftests/x86: Add a test to detect infinite SIGTRAP handler loopXin Li (Intel)
When FRED is enabled, if the Trap Flag (TF) is set without an external debugger attached, it can lead to an infinite loop in the SIGTRAP handler. To avoid this, the software event flag in the augmented SS must be cleared, ensuring that no single-step trap remains pending when ERETU completes. This test checks for that specific scenario—verifying whether the kernel correctly prevents an infinite SIGTRAP loop in this edge case when FRED is enabled. The test should _always_ pass with IDT event delivery, thus no need to disable the test even when FRED is not enabled. Signed-off-by: Xin Li (Intel) <xin@zytor.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20250609084054.2083189-3-xin%40zytor.com
2025-06-08Merge tag 'turbostat-2025.06.08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - Add initial DMR support, which required smarter RAPL probe - Fix AMD MSR RAPL energy reporting - Add RAPL power limit configuration output - Minor fixes * tag 'turbostat-2025.06.08' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: version 2025.06.08 tools/power turbostat: Add initial support for BartlettLake tools/power turbostat: Add initial support for DMR tools/power turbostat: Dump RAPL sysfs info tools/power turbostat: Avoid probing the same perf counters tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared tools/power turbostat: Clean up add perf/msr counter logic tools/power turbostat: Introduce add_msr_counter() tools/power turbostat: Remove add_msr_perf_counter_() tools/power turbostat: Remove add_cstate_perf_counter_() tools/power turbostat: Remove add_rapl_perf_counter_() tools/power turbostat: Quit early for unsupported RAPL counters tools/power turbostat: Always check rapl_joules flag tools/power turbostat: Fix AMD package-energy reporting tools/power turbostat: Fix RAPL_GFX_ALL typo tools/power turbostat: Add Android support for MSR device handling tools/power turbostat.8: pm_domain wording fix tools/power turbostat.8: fix typo: idle_pct should be pct_idle
2025-06-08tools/power turbostat: version 2025.06.08Len Brown
Add initial DMR support, which required smarter RAPL probe Fix AMD MSR RAPL energy reporting Add RAPL power limit configuration output Minor fixes Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Add initial support for BartlettLakeZhang Rui
Add initial support for BartlettLake. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Add initial support for DMRZhang Rui
Add initial support for DMR. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Dump RAPL sysfs infoZhang Rui
for example: intel-rapl:1: psys 28.0s:100W 976.0us:100W intel-rapl:0: package-0 28.0s:57W,max:15W 2.4ms:57W intel-rapl:0/intel-rapl:0:0: core disabled intel-rapl:0/intel-rapl:0:1: uncore disabled intel-rapl-mmio:0: package-0 28.0s:28W,max:15W 2.4ms:57W [lenb: simplified format] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> squish me Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Avoid probing the same perf countersZhang Rui
For the RAPL package energy status counter, Intel and AMD share the same perf_subsys and perf_name, but with different MSR addresses. Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are introduced to describe this counter for different Vendors. As a result, the perf counter is probed twice, and causes a failure in in get_rapl_counters() because expected_read_size and actual_read_size don't match. Fix the problem by skipping the already probed counter. Note, this is not a perfect fix. For example, if different vendors/platforms use the same MSR value for different purpose, the code can be fooled when it probes a rapl_counter_arch_infos[] entry that does not belong to the running Vendor/Platform. In a long run, better to put rapl_counter_arch_infos[] into the platform_features so that this becomes Vendor/Platform specific. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs ↵Zhang Rui
cleared platform_features->rapl_msrs describes the RAPL MSRs supported. While RAPL Perf counters can be exposed from different kernel backend drivers, e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver. Thus, turbostat should first blindly probe all the available RAPL Perf counters, and falls back to the RAPL MSR counters if they are listed in platform_features->rapl_msrs. With this, platforms that don't have RAPL MSRs can clear the platform_features->rapl_msrs bits and use RAPL Perf counters only. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Clean up add perf/msr counter logicZhang Rui
Increase the code readability by moving the no_perf/no_msr flag and the cai->perf_name/cai->msr sanity checks into the counter probe functions. No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Introduce add_msr_counter()Zhang Rui
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR counters and MPERF/APERF/SMI MSR counters, thus its name is misleading. Similar to add_perf_counter(), introduce add_msr_counter() to probe a counter via MSR. Introduce wrapper function add_rapl_msr_counter() at the same time to add extra check for Zero return value for specified RAPL counters. No functional change intended. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Remove add_msr_perf_counter_()Zhang Rui
As the only caller of add_msr_perf_counter_(), add_msr_perf_counter() just gives extra debug output on top. There is no need to keep both functions. Remove add_msr_perf_counter_() and move all the logic to add_msr_perf_counter(). No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Remove add_cstate_perf_counter_()Zhang Rui
As the only caller of add_cstate_perf_counter_(), add_cstate_perf_counter() just gives extra debug output on top. There is no need to keep both functions. Remove add_cstate_perf_counter_() and move all the logic to add_cstate_perf_counter(). No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Remove add_rapl_perf_counter_()Zhang Rui
As the only caller of add_rapl_perf_counter_(), add_rapl_perf_counter() just gives extra debug output on top. There is no need to keep both functions. Remove add_rapl_perf_counter_() and move all the logic to add_rapl_perf_counter(). No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Quit early for unsupported RAPL countersZhang Rui
Quit early for unsupported RAPL counters. No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Always check rapl_joules flagZhang Rui
rapl_joules bit should always be checked even if platform_features->rapl_msrs is not set or no_msr flag is used. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Fix AMD package-energy reportingGautham R. Shenoy
commit 05a2f07db888 ("tools/power turbostat: read RAPL counters via perf") that adds support to read RAPL counters via perf defines the notion of a RAPL domain_id which is set to physical_core_id on platforms which support per_core_rapl counters (Eg: AMD processors Family 17h onwards) and is set to the physical_package_id on all the other platforms. However, the physical_core_id is only unique within a package and on platforms with multiple packages more than one core can have the same physical_core_id and thus the same domain_id. (For eg, the first cores of each package have the physical_core_id = 0). This results in all these cores with the same physical_core_id using the same entry in the rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the perf-initialization for cores whose domain_ids have already been visited, cores that have the same physical_core_id always read the perf file corresponding to the physical_core_id of the first package and thus the package-energy is incorrectly reported to be the same value for different packages. Note: This issue only arises when RAPL counters are read via perf and not when they are read via MSRs since in the latter case the MSRs are read separately on each core. Fix this issue by associating each CPU with rapl_core_id which is unique across all the packages in the system. Fixes: 05a2f07db888 ("tools/power turbostat: read RAPL counters via perf") Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Fix RAPL_GFX_ALL typoKaushlendra Kumar
Fix typo in the currently unused RAPL_GFX_ALL macro definition. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2025-06-08tools/power turbostat: Add Android support for MSR device handlingKaushlendra Kumar
It uses /dev/msrN device paths on Android instead of /dev/cpu/N/msr, updates error messages and permission checks to reflect the Android device path, and wraps platform-specific code with #if defined(ANDROID) to ensure correct behavior on both Android and non-Android systems. These changes improve compatibility and usability of turbostat on Android devices. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit (git 2.34.1) at 2025-09-23 15:32:12 +0000