5838 files changed, 332927 insertions, 105587 deletions
diff --git a/Documentation/ABI/obsolete/o2cb b/Documentation/ABI/obsolete/o2cb
new file mode 100644
index 000000000000..fe7e45e17bc7
--- /dev/null
+++ b/Documentation/ABI/obsolete/o2cb
@@ -0,0 +1,11 @@
+What:		/sys/o2cb
+Date:		Dec 2005
+KernelVersion:	2.6.16
+Contact:	ocfs2-devel@oss.oracle.com
+Description:	Ocfs2-tools looks at 'interface-revision' for versioning
+		information. Each logmask/ file controls a set of debug prints
+		and can be written into with the strings "allow", "deny", or
+		"off". Reading the file returns the current state.
+		Was renamed to /sys/fs/u2cb/
+Users:		ocfs2-tools. It's sufficient to mail proposed changes to
+		ocfs2-devel@oss.oracle.com.
diff --git a/Documentation/ABI/obsolete/procfs-i8k b/Documentation/ABI/obsolete/procfs-i8k
new file mode 100644
index 000000000000..32df4d5bdd15
--- /dev/null
+++ b/Documentation/ABI/obsolete/procfs-i8k
@@ -0,0 +1,10 @@
+What:		/proc/i8k
+Date:		November 2001
+KernelVersion:	2.4.14
+Contact:	Pali Rohár <pali@kernel.org>
+Description:	Legacy interface for getting/setting sensor information like
+		fan speed, temperature, serial number, hotkey status etc
+		on Dell Laptops.
+		Since the driver is now using the standard hwmon sysfs interface,
+		the procfs interface is deprecated.
+Users:		https://github.com/vitorafsr/i8kutils
diff --git a/Documentation/ABI/obsolete/sysfs-bus-iio b/Documentation/ABI/obsolete/sysfs-bus-iio
index c9531bb64816..b64394b0b374 100644
--- a/Documentation/ABI/obsolete/sysfs-bus-iio
+++ b/Documentation/ABI/obsolete/sysfs-bus-iio
@@ -6,6 +6,7 @@ Description:
 
 		Since Kernel 5.11, multiple buffers are supported.
 		so, it is better to use, instead:
+
 			/sys/bus/iio/devices/iio:deviceX/bufferY/length
 
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/enable
@@ -17,6 +18,7 @@ Description:
 
 		Since Kernel 5.11, multiple buffers are supported.
 		so, it is better to use, instead:
+
 			/sys/bus/iio/devices/iio:deviceX/bufferY/enable
 
 What:		/sys/bus/iio/devices/iio:deviceX/scan_elements
@@ -165,6 +167,7 @@ Description:
 
 		Since Kernel 5.11, multiple buffers are supported.
 		so, it is better to use, instead:
+
 			/sys/bus/iio/devices/iio:deviceX/bufferY/watermark
 
 What:		/sys/bus/iio/devices/iio:deviceX/buffer/data_available
@@ -179,4 +182,5 @@ Description:
 
 		Since Kernel 5.11, multiple buffers are supported.
 		so, it is better to use, instead:
+
 			/sys/bus/iio/devices/iio:deviceX/bufferY/data_available
diff --git a/Documentation/ABI/obsolete/sysfs-class-dax b/Documentation/ABI/obsolete/sysfs-class-dax
deleted file mode 100644
index 5bcce27458e3..000000000000
--- a/Documentation/ABI/obsolete/sysfs-class-dax
+++ /dev/null
@@ -1,22 +0,0 @@
-What:           /sys/class/dax/
-Date:           May, 2016
-KernelVersion:  v4.7
-Contact:        nvdimm@lists.linux.dev
-Description:	Device DAX is the device-centric analogue of Filesystem
-		DAX (CONFIG_FS_DAX).  It allows memory ranges to be
-		allocated and mapped without need of an intervening file
-		system.  Device DAX is strict, precise and predictable.
-		Specifically this interface:
-
-		1. Guarantees fault granularity with respect to a given
-		   page size (pte, pmd, or pud) set at configuration time.
-
-		2. Enforces deterministic behavior by being strict about
-		   what fault scenarios are supported.
-
-		The /sys/class/dax/ interface enumerates all the
-		device-dax instances in the system. The ABI is
-		deprecated and will be removed after 2020. It is
-		replaced with the DAX bus interface /sys/bus/dax/ where
-		device-dax instances can be found under
-		/sys/bus/dax/devices/
diff --git a/Documentation/ABI/removed/sysfs-mce b/Documentation/ABI/removed/sysfs-mce
new file mode 100644
index 000000000000..ef5dd2a80918
--- /dev/null
+++ b/Documentation/ABI/removed/sysfs-mce
@@ -0,0 +1,37 @@
+What:		/sys/devices/system/machinecheck/machinecheckX/tolerant
+Contact:	Borislav Petkov <bp@suse.de>
+Date:		Dec, 2021
+Description:
+		Unused and obsolete after the advent of recoverable machine
+		checks (see last sentence below) and those are present since
+		2010 (Nehalem).
+
+		Original description:
+
+		The entries appear for each CPU, but they are truly shared
+		between all CPUs.
+
+		Tolerance level. When a machine check exception occurs for a
+		non corrected machine check the kernel can take different
+		actions.
+
+		Since machine check exceptions can happen any time it is
+		sometimes risky for the kernel to kill a process because it
+		defies normal kernel locking rules. The tolerance level
+		configures how hard the kernel tries to recover even at some
+		risk of	deadlock. Higher tolerant values trade potentially
+		better uptime with the risk of a crash or even corruption
+		(for tolerant >= 3).
+
+		==  ===========================================================
+		 0  always panic on uncorrected errors, log corrected errors
+		 1  panic or SIGBUS on uncorrected errors, log corrected errors
+		 2  SIGBUS or log uncorrected errors, log corrected errors
+		 3  never panic or SIGBUS, log all errors (for testing only)
+		==  ===========================================================
+
+		Default: 1
+
+		Note this only makes a difference if the CPU allows recovery
+		from a machine check exception. Current x86 CPUs generally
+		do not.
diff --git a/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot b/Documentation/ABI/removed/sysfs-selinux-checkreqprot
index ed6b52ca210f..f599a0a87e8b 100644
--- a/Documentation/ABI/obsolete/sysfs-selinux-checkreqprot
+++ b/Documentation/ABI/removed/sysfs-selinux-checkreqprot
@@ -4,6 +4,9 @@ KernelVersion:	2.6.12-rc2 (predates git)
 Contact:	selinux@vger.kernel.org
 Description:
 
+	REMOVAL UPDATE: The SELinux checkreqprot functionality was removed in
+	March 2023, the original deprecation notice is shown below.
+
 	The selinuxfs "checkreqprot" node allows SELinux to be configured
 	to check the protection requested by userspace for mmap/mprotect
 	calls instead of the actual protection applied by the kernel.
diff --git a/Documentation/ABI/obsolete/sysfs-selinux-disable b/Documentation/ABI/removed/sysfs-selinux-disable
index c340278e3cf8..cb783c64cab3 100644
--- a/Documentation/ABI/obsolete/sysfs-selinux-disable
+++ b/Documentation/ABI/removed/sysfs-selinux-disable
@@ -4,6 +4,9 @@ KernelVersion:	2.6.12-rc2 (predates git)
 Contact:	selinux@vger.kernel.org
 Description:
 
+	REMOVAL UPDATE: The SELinux runtime disable functionality was removed
+	in March 2023, the original deprecation notice is shown below.
+
 	The selinuxfs "disable" node allows SELinux to be disabled at runtime
 	prior to a policy being loaded into the kernel.  If disabled via this
 	mechanism, SELinux will remain disabled until the system is rebooted.
diff --git a/Documentation/ABI/stable/o2cb b/Documentation/ABI/stable/o2cb
index 5eb1545e0b8d..b62a967f01a0 100644
--- a/Documentation/ABI/stable/o2cb
+++ b/Documentation/ABI/stable/o2cb
@@ -1,4 +1,4 @@
-What:		/sys/fs/o2cb/ (was /sys/o2cb)
+What:		/sys/fs/o2cb/
 Date:		Dec 2005
 KernelVersion:	2.6.16
 Contact:	ocfs2-devel@oss.oracle.com
diff --git a/Documentation/ABI/stable/sysfs-acpi-pmprofile b/Documentation/ABI/stable/sysfs-acpi-pmprofile
index 2d6314f0e4e4..cd55e421d921 100644
--- a/Documentation/ABI/stable/sysfs-acpi-pmprofile
+++ b/Documentation/ABI/stable/sysfs-acpi-pmprofile
@@ -2,16 +2,17 @@ What:		/sys/firmware/acpi/pm_profile
 Date:		03-Nov-2011
 KernelVersion:	v3.2
 Contact:	linux-acpi@vger.kernel.org
-Description:	The ACPI pm_profile sysfs interface exports the platform
-		power management (and performance) requirement expectations
-		as provided by BIOS. The integer value is directly passed as
-		retrieved from the FADT ACPI table.
+Description:	The ACPI pm_profile sysfs interface exposes the preferred
+		power management (and performance) profile of the platform
+		as provided in the ACPI FADT Preferred_PM_Profile field.
 
-Values:	        For possible values see ACPI specification:
-		5.2.9 Fixed ACPI Description Table (FADT)
-		Field: Preferred_PM_Profile
+		The integer value is directly passed as retrieved from the FADT.
 
-		Currently these values are defined by spec:
+Values:	        For the possible values refer to the Preferred_PM_Profile field
+		definition in Table 5.9 "FADT Format", Section 5.2.9 "Fixed ACPI
+		Description Table (FADT)" of the ACPI specification.
+
+		As of ACPI 6.5, the following values are defined:
 
 		== =================
 		0  Unspecified
@@ -22,5 +23,6 @@ Values:	        For possible values see ACPI specification:
 		5  SOHO Server
 		6  Appliance PC
 		7  Performance Server
-		>7 Reserved
+		8  Tablet
+		>8 Reserved
 		== =================
diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block
new file mode 100644
index 000000000000..c57e5b7cb532
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-block
@@ -0,0 +1,737 @@
+What:		/sys/block/<disk>/alignment_offset
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a physical block size that is
+		bigger than the logical block size (for instance a drive
+		with 4KB physical sectors exposing 512-byte logical
+		blocks to the operating system).  This parameter
+		indicates how many bytes the beginning of the device is
+		offset from the disk's natural alignment.
+
+
+What:		/sys/block/<disk>/discard_alignment
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may
+		internally allocate space in units that are bigger than
+		the exported logical block size. The discard_alignment
+		parameter indicates how many bytes the beginning of the
+		device is offset from the internal allocation unit's
+		natural alignment.
+
+
+What:		/sys/block/<disk>/diskseq
+Date:		February 2021
+Contact:	Matteo Croce <mcroce@microsoft.com>
+Description:
+		The /sys/block/<disk>/diskseq files reports the disk
+		sequence number, which is a monotonically increasing
+		number assigned to every drive.
+		Some devices, like the loop device, refresh such number
+		every time the backing file is changed.
+		The value type is 64 bit unsigned.
+
+
+What:		/sys/block/<disk>/inflight
+Date:		October 2009
+Contact:	Jens Axboe <axboe@kernel.dk>, Nikanth Karthikesan <knikanth@suse.de>
+Description:
+		Reports the number of I/O requests currently in progress
+		(pending / in flight) in a device driver. This can be less
+		than the number of requests queued in the block device queue.
+		The report contains 2 fields: one for read requests
+		and one for write requests.
+		The value type is unsigned int.
+		Cf. Documentation/block/stat.rst which contains a single value for
+		requests in flight.
+		This is related to /sys/block/<disk>/queue/nr_requests
+		and for SCSI device also its queue_depth.
+
+
+What:		/sys/block/<disk>/integrity/device_is_integrity_capable
+Date:		July 2014
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Indicates whether a storage device is capable of storing
+		integrity metadata. Set if the device is T10 PI-capable.
+
+
+What:		/sys/block/<disk>/integrity/format
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Metadata format for integrity capable block device.
+		E.g. T10-DIF-TYPE1-CRC.
+
+
+What:		/sys/block/<disk>/integrity/protection_interval_bytes
+Date:		July 2015
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Describes the number of data bytes which are protected
+		by one integrity tuple. Typically the device's logical
+		block size.
+
+
+What:		/sys/block/<disk>/integrity/read_verify
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Indicates whether the block layer should verify the
+		integrity of read requests serviced by devices that
+		support sending integrity metadata.
+
+
+What:		/sys/block/<disk>/integrity/tag_size
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Number of bytes of integrity tag space available per
+		512 bytes of data.
+
+
+What:		/sys/block/<disk>/integrity/write_generate
+Date:		June 2008
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Indicates whether the block layer should automatically
+		generate checksums for write requests bound for
+		devices that support receiving integrity metadata.
+
+
+What:		/sys/block/<disk>/<partition>/alignment_offset
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Storage devices may report a physical block size that is
+		bigger than the logical block size (for instance a drive
+		with 4KB physical sectors exposing 512-byte logical
+		blocks to the operating system).  This parameter
+		indicates how many bytes the beginning of the partition
+		is offset from the disk's natural alignment.
+
+
+What:		/sys/block/<disk>/<partition>/discard_alignment
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		Devices that support discard functionality may
+		internally allocate space in units that are bigger than
+		the exported logical block size. The discard_alignment
+		parameter indicates how many bytes the beginning of the
+		partition is offset from the internal allocation unit's
+		natural alignment.
+
+
+What:		/sys/block/<disk>/<partition>/stat
+Date:		February 2008
+Contact:	Jerome Marchand <jmarchan@redhat.com>
+Description:
+		The /sys/block/<disk>/<partition>/stat files display the
+		I/O statistics of partition <partition>. The format is the
+		same as the format of /sys/block/<disk>/stat.
+
+
+What:		/sys/block/<disk>/queue/add_random
+Date:		June 2010
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This file allows to turn off the disk entropy contribution.
+		Default value of this file is '1'(on).
+
+
+What:		/sys/block/<disk>/queue/chunk_sectors
+Date:		September 2016
+Contact:	Hannes Reinecke <hare@suse.com>
+Description:
+		[RO] chunk_sectors has different meaning depending on the type
+		of the disk. For a RAID device (dm-raid), chunk_sectors
+		indicates the size in 512B sectors of the RAID volume stripe
+		segment. For a zoned block device, either host-aware or
+		host-managed, chunk_sectors indicates the size in 512B sectors
+		of the zones of the device, with the eventual exception of the
+		last zone of the device which may be smaller.
+
+
+What:		/sys/block/<disk>/queue/crypto/
+Date:		February 2022
+Contact:	linux-block@vger.kernel.org
+Description:
+		The presence of this subdirectory of /sys/block/<disk>/queue/
+		indicates that the device supports inline encryption.  This
+		subdirectory contains files which describe the inline encryption
+		capabilities of the device.  For more information about inline
+		encryption, refer to Documentation/block/inline-encryption.rst.
+
+
+What:		/sys/block/<disk>/queue/crypto/max_dun_bits
+Date:		February 2022
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This file shows the maximum length, in bits, of data unit
+		numbers accepted by the device in inline encryption requests.
+
+
+What:		/sys/block/<disk>/queue/crypto/modes/<mode>
+Date:		February 2022
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] For each crypto mode (i.e., encryption/decryption
+		algorithm) the device supports with inline encryption, a file
+		will exist at this location.  It will contain a hexadecimal
+		number that is a bitmask of the supported data unit sizes, in
+		bytes, for that crypto mode.
+
+		Currently, the crypto modes that may be supported are:
+
+		   * AES-256-XTS
+		   * AES-128-CBC-ESSIV
+		   * Adiantum
+
+		For example, if a device supports AES-256-XTS inline encryption
+		with data unit sizes of 512 and 4096 bytes, the file
+		/sys/block/<disk>/queue/crypto/modes/AES-256-XTS will exist and
+		will contain "0x1200".
+
+
+What:		/sys/block/<disk>/queue/crypto/num_keyslots
+Date:		February 2022
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This file shows the number of keyslots the device has for
+		use with inline encryption.
+
+
+What:		/sys/block/<disk>/queue/dax
+Date:		June 2016
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This file indicates whether the device supports Direct
+		Access (DAX), used by CPU-addressable storage to bypass the
+		pagecache.  It shows '1' if true, '0' if not.
+
+
+What:		/sys/block/<disk>/queue/discard_granularity
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RO] Devices that support discard functionality may internally
+		allocate space using units that are bigger than the logical
+		block size. The discard_granularity parameter indicates the size
+		of the internal allocation unit in bytes if reported by the
+		device. Otherwise the discard_granularity will be set to match
+		the device's physical block size. A discard_granularity of 0
+		means that the device does not support discard functionality.
+
+
+What:		/sys/block/<disk>/queue/discard_max_bytes
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RW] While discard_max_hw_bytes is the hardware limit for the
+		device, this setting is the software limit. Some devices exhibit
+		large latencies when large discards are issued, setting this
+		value lower will make Linux issue smaller discards and
+		potentially help reduce latencies induced by large discard
+		operations.
+
+
+What:		/sys/block/<disk>/queue/discard_max_hw_bytes
+Date:		July 2015
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] Devices that support discard functionality may have
+		internal limits on the number of bytes that can be trimmed or
+		unmapped in a single operation.  The `discard_max_hw_bytes`
+		parameter is set by the device driver to the maximum number of
+		bytes that can be discarded in a single operation.  Discard
+		requests issued to the device must not exceed this limit.  A
+		`discard_max_hw_bytes` value of 0 means that the device does not
+		support discard functionality.
+
+
+What:		/sys/block/<disk>/queue/discard_zeroes_data
+Date:		May 2011
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RO] Will always return 0.  Don't rely on any specific behavior
+		for discards, and don't read this file.
+
+
+What:		/sys/block/<disk>/queue/dma_alignment
+Date:		May 2022
+Contact:	linux-block@vger.kernel.org
+Description:
+		Reports the alignment that user space addresses must have to be
+		used for raw block device access with O_DIRECT and other driver
+		specific passthrough mechanisms.
+
+
+What:		/sys/block/<disk>/queue/fua
+Date:		May 2018
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] Whether or not the block driver supports the FUA flag for
+		write requests.  FUA stands for Force Unit Access. If the FUA
+		flag is set that means that write requests must bypass the
+		volatile cache of the storage device.
+
+
+What:		/sys/block/<disk>/queue/hw_sector_size
+Date:		January 2008
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This is the hardware sector size of the device, in bytes.
+
+
+What:		/sys/block/<disk>/queue/independent_access_ranges/
+Date:		October 2021
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] The presence of this sub-directory of the
+		/sys/block/xxx/queue/ directory indicates that the device is
+		capable of executing requests targeting different sector ranges
+		in parallel. For instance, single LUN multi-actuator hard-disks
+		will have an independent_access_ranges directory if the device
+		correctly advertizes the sector ranges of its actuators.
+
+		The independent_access_ranges directory contains one directory
+		per access range, with each range described using the sector
+		(RO) attribute file to indicate the first sector of the range
+		and the nr_sectors (RO) attribute file to indicate the total
+		number of sectors in the range starting from the first sector of
+		the range.  For example, a dual-actuator hard-disk will have the
+		following independent_access_ranges entries.::
+
+			$ tree /sys/block/<disk>/queue/independent_access_ranges/
+			/sys/block/<disk>/queue/independent_access_ranges/
+			|-- 0
+			|   |-- nr_sectors
+			|   `-- sector
+			`-- 1
+			    |-- nr_sectors
+			    `-- sector
+
+		The sector and nr_sectors attributes use 512B sector unit,
+		regardless of the actual block size of the device. Independent
+		access ranges do not overlap and include all sectors within the
+		device capacity. The access ranges are numbered in increasing
+		order of the range start sector, that is, the sector attribute
+		of range 0 always has the value 0.
+
+
+What:		/sys/block/<disk>/queue/io_poll
+Date:		November 2015
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] When read, this file shows whether polling is enabled (1)
+		or disabled (0).  Writing '0' to this file will disable polling
+		for this device.  Writing any non-zero value will enable this
+		feature.
+
+
+What:		/sys/block/<disk>/queue/io_poll_delay
+Date:		November 2016
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This was used to control what kind of polling will be
+		performed.  It is now fixed to -1, which is classic polling.
+		In this mode, the CPU will repeatedly ask for completions
+		without giving up any time.
+		<deprecated>
+
+
+What:		/sys/block/<disk>/queue/io_timeout
+Date:		November 2018
+Contact:	Weiping Zhang <zhangweiping@didiglobal.com>
+Description:
+		[RW] io_timeout is the request timeout in milliseconds. If a
+		request does not complete in this time then the block driver
+		timeout handler is invoked. That timeout handler can decide to
+		retry the request, to fail it or to start a device recovery
+		strategy.
+
+
+What:		/sys/block/<disk>/queue/iostats
+Date:		January 2009
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This file is used to control (on/off) the iostats
+		accounting of the disk.
+
+
+What:		/sys/block/<disk>/queue/logical_block_size
+Date:		May 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RO] This is the smallest unit the storage device can address.
+		It is typically 512 bytes.
+
+
+What:		/sys/block/<disk>/queue/max_active_zones
+Date:		July 2020
+Contact:	Niklas Cassel <niklas.cassel@wdc.com>
+Description:
+		[RO] For zoned block devices (zoned attribute indicating
+		"host-managed" or "host-aware"), the sum of zones belonging to
+		any of the zone states: EXPLICIT OPEN, IMPLICIT OPEN or CLOSED,
+		is limited by this value. If this value is 0, there is no limit.
+
+		If the host attempts to exceed this limit, the driver should
+		report this error with BLK_STS_ZONE_ACTIVE_RESOURCE, which user
+		space may see as the EOVERFLOW errno.
+
+
+What:		/sys/block/<disk>/queue/max_discard_segments
+Date:		February 2017
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] The maximum number of DMA scatter/gather entries in a
+		discard request.
+
+
+What:		/sys/block/<disk>/queue/max_hw_sectors_kb
+Date:		September 2004
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This is the maximum number of kilobytes supported in a
+		single data transfer.
+
+
+What:		/sys/block/<disk>/queue/max_integrity_segments
+Date:		September 2010
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] Maximum number of elements in a DMA scatter/gather list
+		with integrity data that will be submitted by the block layer
+		core to the associated block driver.
+
+
+What:		/sys/block/<disk>/queue/max_open_zones
+Date:		July 2020
+Contact:	Niklas Cassel <niklas.cassel@wdc.com>
+Description:
+		[RO] For zoned block devices (zoned attribute indicating
+		"host-managed" or "host-aware"), the sum of zones belonging to
+		any of the zone states: EXPLICIT OPEN or IMPLICIT OPEN, is
+		limited by this value. If this value is 0, there is no limit.
+
+
+What:		/sys/block/<disk>/queue/max_sectors_kb
+Date:		September 2004
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This is the maximum number of kilobytes that the block
+		layer will allow for a filesystem request. Must be smaller than
+		or equal to the maximum size allowed by the hardware. Write 0
+		to use default kernel settings.
+
+
+What:		/sys/block/<disk>/queue/max_segment_size
+Date:		March 2010
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] Maximum size in bytes of a single element in a DMA
+		scatter/gather list.
+
+
+What:		/sys/block/<disk>/queue/max_segments
+Date:		March 2010
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] Maximum number of elements in a DMA scatter/gather list
+		that is submitted to the associated block driver.
+
+
+What:		/sys/block/<disk>/queue/minimum_io_size
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RO] Storage devices may report a granularity or preferred
+		minimum I/O size which is the smallest request the device can
+		perform without incurring a performance penalty.  For disk
+		drives this is often the physical block size.  For RAID arrays
+		it is often the stripe chunk size.  A properly aligned multiple
+		of minimum_io_size is the preferred request size for workloads
+		where a high number of I/O operations is desired.
+
+
+What:		/sys/block/<disk>/queue/nomerges
+Date:		January 2010
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] Standard I/O elevator operations include attempts to merge
+		contiguous I/Os. For known random I/O loads these attempts will
+		always fail and result in extra cycles being spent in the
+		kernel. This allows one to turn off this behavior on one of two
+		ways: When set to 1, complex merge checks are disabled, but the
+		simple one-shot merges with the previous I/O request are
+		enabled. When set to 2, all merge tries are disabled. The
+		default value is 0 - which enables all types of merge tries.
+
+
+What:		/sys/block/<disk>/queue/nr_requests
+Date:		July 2003
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This controls how many requests may be allocated in the
+		block layer for read or write requests. Note that the total
+		allocated number may be twice this amount, since it applies only
+		to reads or writes (not the accumulated sum).
+
+		To avoid priority inversion through request starvation, a
+		request queue maintains a separate request pool per each cgroup
+		when CONFIG_BLK_CGROUP is enabled, and this parameter applies to
+		each such per-block-cgroup request pool.  IOW, if there are N
+		block cgroups, each request queue may have up to N request
+		pools, each independently regulated by nr_requests.
+
+
+What:		/sys/block/<disk>/queue/nr_zones
+Date:		November 2018
+Contact:	Damien Le Moal <damien.lemoal@wdc.com>
+Description:
+		[RO] nr_zones indicates the total number of zones of a zoned
+		block device ("host-aware" or "host-managed" zone model). For
+		regular block devices, the value is always 0.
+
+
+What:		/sys/block/<disk>/queue/optimal_io_size
+Date:		April 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RO] Storage devices may report an optimal I/O size, which is
+		the device's preferred unit for sustained I/O.  This is rarely
+		reported for disk drives.  For RAID arrays it is usually the
+		stripe width or the internal track size.  A properly aligned
+		multiple of optimal_io_size is the preferred request size for
+		workloads where sustained throughput is desired.  If no optimal
+		I/O size is reported this file contains 0.
+
+
+What:		/sys/block/<disk>/queue/physical_block_size
+Date:		May 2009
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RO] This is the smallest unit a physical storage device can
+		write atomically.  It is usually the same as the logical block
+		size but may be bigger.  One example is SATA drives with 4KB
+		sectors that expose a 512-byte logical block size to the
+		operating system.  For stacked block devices the
+		physical_block_size variable contains the maximum
+		physical_block_size of the component devices.
+
+
+What:		/sys/block/<disk>/queue/read_ahead_kb
+Date:		May 2004
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] Maximum number of kilobytes to read-ahead for filesystems
+		on this block device.
+
+
+What:		/sys/block/<disk>/queue/rotational
+Date:		January 2009
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This file is used to stat if the device is of rotational
+		type or non-rotational type.
+
+
+What:		/sys/block/<disk>/queue/rq_affinity
+Date:		September 2008
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] If this option is '1', the block layer will migrate request
+		completions to the cpu "group" that originally submitted the
+		request. For some workloads this provides a significant
+		reduction in CPU cycles due to caching effects.
+
+		For storage configurations that need to maximize distribution of
+		completion processing setting this option to '2' forces the
+		completion to run on the requesting cpu (bypassing the "group"
+		aggregation logic).
+
+
+What:		/sys/block/<disk>/queue/scheduler
+Date:		October 2004
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] When read, this file will display the current and available
+		IO schedulers for this block device. The currently active IO
+		scheduler will be enclosed in [] brackets. Writing an IO
+		scheduler name to this file will switch control of this block
+		device to that new IO scheduler. Note that writing an IO
+		scheduler name to this file will attempt to load that IO
+		scheduler module, if it isn't already present in the system.
+
+
+What:		/sys/block/<disk>/queue/stable_writes
+Date:		September 2020
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This file will contain '1' if memory must not be modified
+		while it is being used in a write request to this device.  When
+		this is the case and the kernel is performing writeback of a
+		page, the kernel will wait for writeback to complete before
+		allowing the page to be modified again, rather than allowing
+		immediate modification as is normally the case.  This
+		restriction arises when the device accesses the memory multiple
+		times where the same data must be seen every time -- for
+		example, once to calculate a checksum and once to actually write
+		the data.  If no such restriction exists, this file will contain
+		'0'.  This file is writable for testing purposes.
+
+
+What:		/sys/block/<disk>/queue/throttle_sample_time
+Date:		March 2017
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] This is the time window that blk-throttle samples data, in
+		millisecond.  blk-throttle makes decision based on the
+		samplings. Lower time means cgroups have more smooth throughput,
+		but higher CPU overhead. This exists only when
+		CONFIG_BLK_DEV_THROTTLING_LOW is enabled.
+
+
+What:		/sys/block/<disk>/queue/virt_boundary_mask
+Date:		April 2021
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This file shows the I/O segment memory alignment mask for
+		the block device.  I/O requests to this device will be split
+		between segments wherever either the memory address of the end
+		of the previous segment or the memory address of the beginning
+		of the current segment is not aligned to virt_boundary_mask + 1
+		bytes.
+
+
+What:		/sys/block/<disk>/queue/wbt_lat_usec
+Date:		November 2016
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] If the device is registered for writeback throttling, then
+		this file shows the target minimum read latency. If this latency
+		is exceeded in a given window of time (see wb_window_usec), then
+		the writeback throttling will start scaling back writes. Writing
+		a value of '0' to this file disables the feature. Writing a
+		value of '-1' to this file resets the value to the default
+		setting.
+
+
+What:		/sys/block/<disk>/queue/write_cache
+Date:		April 2016
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RW] When read, this file will display whether the device has
+		write back caching enabled or not. It will return "write back"
+		for the former case, and "write through" for the latter. Writing
+		to this file can change the kernels view of the device, but it
+		doesn't alter the device state. This means that it might not be
+		safe to toggle the setting from "write back" to "write through",
+		since that will also eliminate cache flushes issued by the
+		kernel.
+
+
+What:		/sys/block/<disk>/queue/write_same_max_bytes
+Date:		January 2012
+Contact:	Martin K. Petersen <martin.petersen@oracle.com>
+Description:
+		[RO] Some devices support a write same operation in which a
+		single data block can be written to a range of several
+		contiguous blocks on storage. This can be used to wipe areas on
+		disk or to initialize drives in a RAID configuration.
+		write_same_max_bytes indicates how many bytes can be written in
+		a single write same command. If write_same_max_bytes is 0, write
+		same is not supported by the device.
+
+
+What:		/sys/block/<disk>/queue/write_zeroes_max_bytes
+Date:		November 2016
+Contact:	Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
+Description:
+		[RO] Devices that support write zeroes operation in which a
+		single request can be issued to zero out the range of contiguous
+		blocks on storage without having any payload in the request.
+		This can be used to optimize writing zeroes to the devices.
+		write_zeroes_max_bytes indicates how many bytes can be written
+		in a single write zeroes command. If write_zeroes_max_bytes is
+		0, write zeroes is not supported by the device.
+
+
+What:		/sys/block/<disk>/queue/zone_append_max_bytes
+Date:		May 2020
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This is the maximum number of bytes that can be written to
+		a sequential zone of a zoned block device using a zone append
+		write operation (REQ_OP_ZONE_APPEND). This value is always 0 for
+		regular block devices.
+
+
+What:		/sys/block/<disk>/queue/zone_write_granularity
+Date:		January 2021
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] This indicates the alignment constraint, in bytes, for
+		write operations in sequential zones of zoned block devices
+		(devices with a zoned attributed that reports "host-managed" or
+		"host-aware"). This value is always 0 for regular block devices.
+
+
+What:		/sys/block/<disk>/queue/zoned
+Date:		September 2016
+Contact:	Damien Le Moal <damien.lemoal@wdc.com>
+Description:
+		[RO] zoned indicates if the device is a zoned block device and
+		the zone model of the device if it is indeed zoned.  The
+		possible values indicated by zoned are "none" for regular block
+		devices and "host-aware" or "host-managed" for zoned block
+		devices. The characteristics of host-aware and host-managed
+		zoned block devices are described in the ZBC (Zoned Block
+		Commands) and ZAC (Zoned Device ATA Command Set) standards.
+		These standards also define the "drive-managed" zone model.
+		However, since drive-managed zoned block devices do not support
+		zone commands, they will be treated as regular block devices and
+		zoned will report "none".
+
+
+What:		/sys/block/<disk>/hidden
+Date:		March 2023
+Contact:	linux-block@vger.kernel.org
+Description:
+		[RO] the block device is hidden. it doesn’t produce events, and
+		can’t be opened from userspace or using blkdev_get*.
+		Used for the underlying components of multipath devices.
+
+
+What:		/sys/block/<disk>/stat
+Date:		February 2008
+Contact:	Jerome Marchand <jmarchan@redhat.com>
+Description:
+		The /sys/block/<disk>/stat files displays the I/O
+		statistics of disk <disk>. They contain 11 fields:
+
+		==  ==============================================
+		 1  reads completed successfully
+		 2  reads merged
+		 3  sectors read
+		 4  time spent reading (ms)
+		 5  writes completed
+		 6  writes merged
+		 7  sectors written
+		 8  time spent writing (ms)
+		 9  I/Os currently in progress
+		10  time spent doing I/Os (ms)
+		11  weighted time spent doing I/Os (ms)
+		12  discards completed
+		13  discards merged
+		14  sectors discarded
+		15  time spent discarding (ms)
+		16  flush requests completed
+		17  time spent flushing (ms)
+		==  ==============================================
+
+		For more details refer Documentation/admin-guide/iostats.rst
diff --git a/Documentation/ABI/stable/sysfs-bus-mhi b/Documentation/ABI/stable/sysfs-bus-mhi
index ecfe7662f8d0..96ccc3385a2b 100644
--- a/Documentation/ABI/stable/sysfs-bus-mhi
+++ b/Documentation/ABI/stable/sysfs-bus-mhi
@@ -19,3 +19,13 @@ Description:	The file holds the OEM PK Hash value of the endpoint device
 		read without having the device power on at least once, the file
 		will read all 0's.
 Users:		Any userspace application or clients interested in device info.
+
+What:           /sys/bus/mhi/devices/.../soc_reset
+Date:           April 2022
+KernelVersion:  5.19
+Contact:        mhi@lists.linux.dev
+Description:	Initiates a SoC reset on the MHI controller.  A SoC reset is
+                a reset of last resort, and will require a complete re-init.
+                This can be useful as a method of recovery if the device is
+                non-responsive, or as a means of loading new firmware as a
+                system administration task.
diff --git a/Documentation/ABI/stable/sysfs-class-infiniband b/Documentation/ABI/stable/sysfs-class-infiniband
index 9b1bdfa43354..ebf08c604336 100644
--- a/Documentation/ABI/stable/sysfs-class-infiniband
+++ b/Documentation/ABI/stable/sysfs-class-infiniband
@@ -232,10 +232,10 @@ Description: 	The RoCE type of the associated GID resides at index <gid-index>.
 		or "RoCE v2" for RoCE v2 based GIDs.
 
 
-What:		/sys/class/infiniband_mad/umadN/ibdev
-What:		/sys/class/infiniband_mad/umadN/port
-What:		/sys/class/infiniband_mad/issmN/ibdev
-What:		/sys/class/infiniband_mad/issmN/port
+What:		/sys/class/infiniband_mad/umad<N>/ibdev
+What:		/sys/class/infiniband_mad/umad<N>/port
+What:		/sys/class/infiniband_mad/issm<N>/ibdev
+What:		/sys/class/infiniband_mad/issm<N>/port
 Date:		Apr, 2005
 KernelVersion:	v2.6.12
 Contact:	linux-rdma@vger.kernel.org
@@ -261,8 +261,8 @@ Description:
 		userspace ABI compatibility of umad & issm devices.
 
 
-What:		/sys/class/infiniband_verbs/uverbsN/ibdev
-What:		/sys/class/infiniband_verbs/uverbsN/abi_version
+What:		/sys/class/infiniband_verbs/uverbs<N>/ibdev
+What:		/sys/class/infiniband_verbs/uverbs<N>/abi_version
 Date:		Sept, 2005
 KernelVersion:	v2.6.14
 Contact:	linux-rdma@vger.kernel.org
@@ -471,7 +471,7 @@ Description:
 		=============== ======================================================
 
 
-What:		/sys/class/infiniband/qibX/ports/N/sl2vl/[0-15]
+What:		/sys/class/infiniband/qibX/ports/<N>/sl2vl/[0-15]
 Date:		May, 2010
 KernelVersion:	v2.6.35
 Contact:	linux-rdma@vger.kernel.org
@@ -480,8 +480,8 @@ Description:
 		the Service Level (SL). Listing the SL files returns the Virtual
 		Lane (VL) as programmed by the SL.
 
-What:		/sys/class/infiniband/qibX/ports/N/CCMgtA/cc_settings_bin
-What:		/sys/class/infiniband/qibX/ports/N/CCMgtA/cc_table_bin
+What:		/sys/class/infiniband/qibX/ports/<N>/CCMgtA/cc_settings_bin
+What:		/sys/class/infiniband/qibX/ports/<N>/CCMgtA/cc_table_bin
 Date:		May, 2010
 KernelVersion:	v2.6.35
 Contact:	linux-rdma@vger.kernel.org
@@ -499,11 +499,11 @@ Description:
 				delay.
 		=============== ================================================
 
-What:		/sys/class/infiniband/qibX/ports/N/linkstate/loopback
-What:		/sys/class/infiniband/qibX/ports/N/linkstate/led_override
-What:		/sys/class/infiniband/qibX/ports/N/linkstate/hrtbt_enable
-What:		/sys/class/infiniband/qibX/ports/N/linkstate/status
-What:		/sys/class/infiniband/qibX/ports/N/linkstate/status_str
+What:		/sys/class/infiniband/qibX/ports/<N>/linkstate/loopback
+What:		/sys/class/infiniband/qibX/ports/<N>/linkstate/led_override
+What:		/sys/class/infiniband/qibX/ports/<N>/linkstate/hrtbt_enable
+What:		/sys/class/infiniband/qibX/ports/<N>/linkstate/status
+What:		/sys/class/infiniband/qibX/ports/<N>/linkstate/status_str
 Date:		May, 2010
 KernelVersion:	v2.6.35
 Contact:	linux-rdma@vger.kernel.org
@@ -523,16 +523,16 @@ Description:
 				"Fatal_Hardware_Error".
 		=============== ===============================================
 
-What:		/sys/class/infiniband/qibX/ports/N/diag_counters/rc_resends
-What:		/sys/class/infiniband/qibX/ports/N/diag_counters/seq_naks
-What:		/sys/class/infiniband/qibX/ports/N/diag_counters/rdma_seq
-What:		/sys/class/infiniband/qibX/ports/N/diag_counters/rnr_naks
-What:		/sys/class/infiniband/qibX/ports/N/diag_counters/other_naks
-What:		/sys/class/infiniband/qibX/ports/N/diag_counters/rc_timeouts
-What:		/sys/class/infiniband/qibX/ports/N/diag_counters/look_pkts
-What:		/sys/class/infiniband/qibX/ports/N/diag_counters/pkt_drops
-What:		/sys/class/infiniband/qibX/ports/N/diag_counters/dma_wait
-What:		/sys/class/infiniband/qibX/ports/N/diag_counters/unaligned
+What:		/sys/class/infiniband/qibX/ports/<N>/diag_counters/rc_resends
+What:		/sys/class/infiniband/qibX/ports/<N>/diag_counters/seq_naks
+What:		/sys/class/infiniband/qibX/ports/<N>/diag_counters/rdma_seq
+What:		/sys/class/infiniband/qibX/ports/<N>/diag_counters/rnr_naks
+What:		/sys/class/infiniband/qibX/ports/<N>/diag_counters/other_naks
+What:		/sys/class/infiniband/qibX/ports/<N>/diag_counters/rc_timeouts
+What:		/sys/class/infiniband/qibX/ports/<N>/diag_counters/look_pkts
+What:		/sys/class/infiniband/qibX/ports/<N>/diag_counters/pkt_drops
+What:		/sys/class/infiniband/qibX/ports/<N>/diag_counters/dma_wait
+What:		/sys/class/infiniband/qibX/ports/<N>/diag_counters/unaligned
 Date:		May, 2010
 KernelVersion:	v2.6.35
 Contact:	linux-rdma@vger.kernel.org
@@ -650,9 +650,9 @@ Description:
 		=============== =============================================
 
 
-What:		/sys/class/infiniband/hfi1_X/ports/N/CCMgtA/cc_settings_bin
-What:		/sys/class/infiniband/hfi1_X/ports/N/CCMgtA/cc_table_bin
-What:		/sys/class/infiniband/hfi1_X/ports/N/CCMgtA/cc_prescan
+What:		/sys/class/infiniband/hfi1_X/ports/<N>/CCMgtA/cc_settings_bin
+What:		/sys/class/infiniband/hfi1_X/ports/<N>/CCMgtA/cc_table_bin
+What:		/sys/class/infiniband/hfi1_X/ports/<N>/CCMgtA/cc_prescan
 Date:		May, 2016
 KernelVersion:	v4.6
 Contact:	linux-rdma@vger.kernel.org
@@ -675,9 +675,9 @@ Description:
 				disable.
 		=============== ================================================
 
-What:		/sys/class/infiniband/hfi1_X/ports/N/sc2vl/[0-31]
-What:		/sys/class/infiniband/hfi1_X/ports/N/sl2sc/[0-31]
-What:		/sys/class/infiniband/hfi1_X/ports/N/vl2mtu/[0-15]
+What:		/sys/class/infiniband/hfi1_X/ports/<N>/sc2vl/[0-31]
+What:		/sys/class/infiniband/hfi1_X/ports/<N>/sl2sc/[0-31]
+What:		/sys/class/infiniband/hfi1_X/ports/<N>/vl2mtu/[0-15]
 Date:		May, 2016
 KernelVersion:	v4.6
 Contact:	linux-rdma@vger.kernel.org
@@ -691,8 +691,8 @@ Description:
 		=============== ===================================================
 
 
-What:		/sys/class/infiniband/hfi1_X/sdma_N/cpu_list
-What:		/sys/class/infiniband/hfi1_X/sdma_N/vl
+What:		/sys/class/infiniband/hfi1_X/sdma_<N>/cpu_list
+What:		/sys/class/infiniband/hfi1_X/sdma_<N>/vl
 Date:		Sept, 2016
 KernelVersion:	v4.8
 Contact:	linux-rdma@vger.kernel.org
diff --git a/Documentation/ABI/stable/sysfs-class-tpm b/Documentation/ABI/stable/sysfs-class-tpm
index d897ecb9615f..411d5895bed4 100644
--- a/Documentation/ABI/stable/sysfs-class-tpm
+++ b/Documentation/ABI/stable/sysfs-class-tpm
@@ -195,7 +195,7 @@ Description:	The "tpm_version_major" property shows the TCG spec major version
 
 		  2
 
-What:		/sys/class/tpm/tpmX/pcr-H/N
+What:		/sys/class/tpm/tpmX/pcr-<H>/<N>
 Date:		March 2021
 KernelVersion:	5.12
 Contact:	linux-integrity@vger.kernel.org
diff --git a/Documentation/ABI/stable/sysfs-devices b/Documentation/ABI/stable/sysfs-devices
index 42bf1eab5677..98a8ef99ac5f 100644
--- a/Documentation/ABI/stable/sysfs-devices
+++ b/Documentation/ABI/stable/sysfs-devices
@@ -23,3 +23,10 @@ Contact:	Device Tree mailing list <devicetree@vger.kernel.org>
 Description:
 		If CONFIG_OF is enabled, then this file is present. When
 		read, it returns full name of the device node.
+
+What:		/sys/devices/*/dev
+Date:		Jun 2006
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		Major and minor numbers of the character device corresponding
+		to the device (in <major>:<minor> format).
diff --git a/Documentation/ABI/stable/sysfs-devices-node b/Documentation/ABI/stable/sysfs-devices-node
index 484fc04bcc25..402af4b2b905 100644
--- a/Documentation/ABI/stable/sysfs-devices-node
+++ b/Documentation/ABI/stable/sysfs-devices-node
@@ -176,3 +176,48 @@ Contact:	Keith Busch <keith.busch@intel.com>
 Description:
 		The cache write policy: 0 for write-back, 1 for write-through,
 		other or unknown.
+
+What:		/sys/devices/system/node/nodeX/x86/sgx_total_bytes
+Date:		November 2021
+Contact:	Jarkko Sakkinen <jarkko@kernel.org>
+Description:
+		The total amount of SGX physical memory in bytes.
+
+What:		/sys/devices/system/node/nodeX/memory_failure/total
+Date:		January 2023
+Contact:	Jiaqi Yan <jiaqiyan@google.com>
+Description:
+		The total number of raw poisoned pages (pages containing
+		corrupted data due to memory errors) on a NUMA node.
+
+What:		/sys/devices/system/node/nodeX/memory_failure/ignored
+Date:		January 2023
+Contact:	Jiaqi Yan <jiaqiyan@google.com>
+Description:
+		Of the raw poisoned pages on a NUMA node, how many pages are
+		ignored by memory error recovery attempt, usually because
+		support for this type of pages is unavailable, and kernel
+		gives up the recovery.
+
+What:		/sys/devices/system/node/nodeX/memory_failure/failed
+Date:		January 2023
+Contact:	Jiaqi Yan <jiaqiyan@google.com>
+Description:
+		Of the raw poisoned pages on a NUMA node, how many pages are
+		failed by memory error recovery attempt. This usually means
+		a key recovery operation failed.
+
+What:		/sys/devices/system/node/nodeX/memory_failure/delayed
+Date:		January 2023
+Contact:	Jiaqi Yan <jiaqiyan@google.com>
+Description:
+		Of the raw poisoned pages on a NUMA node, how many pages are
+		delayed by memory error recovery attempt. Delayed poisoned
+		pages usually will be retried by kernel.
+
+What:		/sys/devices/system/node/nodeX/memory_failure/recovered
+Date:		January 2023
+Contact:	Jiaqi Yan <jiaqiyan@google.com>
+Description:
+		Of the raw poisoned pages on a NUMA node, how many pages are
+		recovered by memory error recovery attempt.
diff --git a/Documentation/ABI/stable/sysfs-devices-system-cpu b/Documentation/ABI/stable/sysfs-devices-system-cpu
index 516dafea03eb..902392d7eddf 100644
--- a/Documentation/ABI/stable/sysfs-devices-system-cpu
+++ b/Documentation/ABI/stable/sysfs-devices-system-cpu
@@ -42,6 +42,12 @@ Description:    the CPU core ID of cpuX. Typically it is the hardware platform's
                 architecture and platform dependent.
 Values:         integer
 
+What:           /sys/devices/system/cpu/cpuX/topology/cluster_id
+Description:    the cluster ID of cpuX.  Typically it is the hardware platform's
+                identifier (rather than the kernel's). The actual value is
+                architecture and platform dependent.
+Values:         integer
+
 What:           /sys/devices/system/cpu/cpuX/topology/book_id
 Description:    the book ID of cpuX. Typically it is the hardware platform's
                 identifier (rather than the kernel's). The actual value is
@@ -80,11 +86,24 @@ What:           /sys/devices/system/cpu/cpuX/topology/die_cpus
 Description:    internal kernel map of CPUs within the same die.
 Values:         hexadecimal bitmask.
 
+What:           /sys/devices/system/cpu/cpuX/topology/ppin
+Description:    per-socket protected processor inventory number
+Values:         hexadecimal.
+
 What:           /sys/devices/system/cpu/cpuX/topology/die_cpus_list
 Description:    human-readable list of CPUs within the same die.
                 The format is like 0-3, 8-11, 14,17.
 Values:         decimal list.
 
+What:           /sys/devices/system/cpu/cpuX/topology/cluster_cpus
+Description:    internal kernel map of CPUs within the same cluster.
+Values:         hexadecimal bitmask.
+
+What:           /sys/devices/system/cpu/cpuX/topology/cluster_cpus_list
+Description:    human-readable list of CPUs within the same cluster.
+                The format is like 0-3, 8-11, 14,17.
+Values:         decimal list.
+
 What:           /sys/devices/system/cpu/cpuX/topology/book_siblings
 Description:    internal kernel map of cpuX's hardware threads within the same
                 book_id. it's only used on s390.
diff --git a/Documentation/ABI/stable/sysfs-driver-dma-idxd b/Documentation/ABI/stable/sysfs-driver-dma-idxd
index df4afbccf037..534b7a3d59fc 100644
--- a/Documentation/ABI/stable/sysfs-driver-dma-idxd
+++ b/Documentation/ABI/stable/sysfs-driver-dma-idxd
@@ -22,6 +22,7 @@ Date:           Oct 25, 2019
 KernelVersion:  5.6.0
 Contact:        dmaengine@vger.kernel.org
 Description:    The largest number of work descriptors in a batch.
+                It's not visible when the device does not support batch.
 
 What:           /sys/bus/dsa/devices/dsa<m>/max_work_queues_size
 Date:           Oct 25, 2019
@@ -41,14 +42,16 @@ KernelVersion:  5.6.0
 Contact:        dmaengine@vger.kernel.org
 Description:    The maximum number of groups can be created under this device.
 
-What:           /sys/bus/dsa/devices/dsa<m>/max_tokens
-Date:           Oct 25, 2019
-KernelVersion:  5.6.0
+What:           /sys/bus/dsa/devices/dsa<m>/max_read_buffers
+Date:           Dec 10, 2021
+KernelVersion:  5.17.0
 Contact:        dmaengine@vger.kernel.org
-Description:    The total number of bandwidth tokens supported by this device.
-		The bandwidth tokens represent resources within the DSA
+Description:    The total number of read buffers supported by this device.
+		The read buffers represent resources within the DSA
 		implementation, and these resources are allocated by engines to
-		support operations.
+		support operations. See DSA spec v1.2 9.2.4 Total Read Buffers.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:           /sys/bus/dsa/devices/dsa<m>/max_transfer_size
 Date:           Oct 25, 2019
@@ -115,13 +118,15 @@ KernelVersion:  5.6.0
 Contact:        dmaengine@vger.kernel.org
 Description:    To indicate if this device is configurable or not.
 
-What:           /sys/bus/dsa/devices/dsa<m>/token_limit
-Date:           Oct 25, 2019
-KernelVersion:  5.6.0
+What:           /sys/bus/dsa/devices/dsa<m>/read_buffer_limit
+Date:           Dec 10, 2021
+KernelVersion:  5.17.0
 Contact:        dmaengine@vger.kernel.org
-Description:    The maximum number of bandwidth tokens that may be in use at
+Description:    The maximum number of read buffers that may be in use at
 		one time by operations that access low bandwidth memory in the
-		device.
+		device. See DSA spec v1.2 9.2.8 GENCFG on Global Read Buffer Limit.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
 
 What:		/sys/bus/dsa/devices/dsa<m>/cmd_status
 Date:		Aug 28, 2020
@@ -131,6 +136,22 @@ Description:	The last executed device administrative command's status/error.
 		Also last configuration error overloaded.
 		Writing to it will clear the status.
 
+What:		/sys/bus/dsa/devices/dsa<m>/iaa_cap
+Date:		Sept 14, 2022
+KernelVersion: 6.0.0
+Contact:	dmaengine@vger.kernel.org
+Description:	IAA (IAX) capability mask. Exported to user space for application
+		consumption. This attribute should only be visible on IAA devices
+		that are version 2 or later.
+
+What:		/sys/bus/dsa/devices/dsa<m>/event_log_size
+Date:		Sept 14, 2022
+KernelVersion: 6.4.0
+Contact:	dmaengine@vger.kernel.org
+Description:	The event log size to be configured. Default is 64 entries and
+		occupies 4k size if the evl entry is 64 bytes. It's visible
+		only on platforms that support the capability.
+
 What:		/sys/bus/dsa/devices/wq<m>.<n>/block_on_fault
 Date:		Oct 27, 2020
 KernelVersion:	5.11.0
@@ -205,6 +226,7 @@ KernelVersion:	5.10.0
 Contact:	dmaengine@vger.kernel.org
 Description:	The max batch size for this workqueue. Cannot exceed device
 		max batch size. Configurable parameter.
+		It's not visible when the device does not support batch.
 
 What:		/sys/bus/dsa/devices/wq<m>.<n>/ats_disable
 Date:		Nov 13, 2020
@@ -213,6 +235,16 @@ Contact:	dmaengine@vger.kernel.org
 Description:	Indicate whether ATS disable is turned on for the workqueue.
 		0 indicates ATS is on, and 1 indicates ATS is off for the workqueue.
 
+What:		/sys/bus/dsa/devices/wq<m>.<n>/prs_disable
+Date:		Sept 14, 2022
+KernelVersion: 6.4.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Controls whether PRS disable is turned on for the workqueue.
+		0 indicates PRS is on, and 1 indicates PRS is off for the
+		workqueue. This option overrides block_on_fault attribute
+		if set. It's visible only on platforms that support the
+		capability.
+
 What:		/sys/bus/dsa/devices/wq<m>.<n>/occupancy
 Date		May 25, 2021
 KernelVersion:	5.14.0
@@ -220,8 +252,104 @@ Contact:	dmaengine@vger.kernel.org
 Description:	Show the current number of entries in this WQ if WQ Occupancy
 		Support bit WQ capabilities is 1.
 
+What:		/sys/bus/dsa/devices/wq<m>.<n>/enqcmds_retries
+Date		Oct 29, 2021
+KernelVersion:	5.17.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Indicate the number of retires for an enqcmds submission on a sharedwq.
+		A max value to set attribute is capped at 64.
+
+What:		/sys/bus/dsa/devices/wq<m>.<n>/op_config
+Date:		Sept 14, 2022
+KernelVersion:	6.0.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Shows the operation capability bits displayed in bitmap format
+		presented by %*pb printk() output format specifier.
+		The attribute can be configured when the WQ is disabled in
+		order to configure the WQ to accept specific bits that
+		correlates to the operations allowed. It's visible only
+		on platforms that support the capability.
+
 What:           /sys/bus/dsa/devices/engine<m>.<n>/group_id
 Date:           Oct 25, 2019
 KernelVersion:  5.6.0
 Contact:        dmaengine@vger.kernel.org
 Description:    The group that this engine belongs to.
+
+What:		/sys/bus/dsa/devices/group<m>.<n>/use_read_buffer_limit
+Date:		Dec 10, 2021
+KernelVersion:	5.17.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Enable the use of global read buffer limit for the group. See DSA
+		spec v1.2 9.2.18 GRPCFG Use Global Read Buffer Limit.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
+
+What:		/sys/bus/dsa/devices/group<m>.<n>/read_buffers_allowed
+Date:		Dec 10, 2021
+KernelVersion:	5.17.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Indicates max number of read buffers that may be in use at one time
+		by all engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read
+		Buffers Allowed.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
+
+What:		/sys/bus/dsa/devices/group<m>.<n>/read_buffers_reserved
+Date:		Dec 10, 2021
+KernelVersion:	5.17.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Indicates the number of Read Buffers reserved for the use of
+		engines in the group. See DSA spec v1.2 9.2.18 GRPCFG Read Buffers
+		Reserved.
+		It's not visible when the device does not support Read Buffer
+		allocation control.
+
+What:		/sys/bus/dsa/devices/group<m>.<n>/desc_progress_limit
+Date:		Sept 14, 2022
+KernelVersion:	6.0.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Allows control of the number of work descriptors that can be
+		concurrently processed by an engine in the group as a fraction
+		of the Maximum Work Descriptors in Progress value specified in
+		the ENGCAP register. The acceptable values are 0 (default),
+		1 (1/2 of max value), 2 (1/4 of the max value), and 3 (1/8 of
+		the max value). It's visible only on platforms that support
+		the capability.
+
+What:		/sys/bus/dsa/devices/group<m>.<n>/batch_progress_limit
+Date:		Sept 14, 2022
+KernelVersion:	6.0.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Allows control of the number of batch descriptors that can be
+		concurrently processed by an engine in the group as a fraction
+		of the Maximum Batch Descriptors in Progress value specified in
+		the ENGCAP register. The acceptable values are 0 (default),
+		1 (1/2 of max value), 2 (1/4 of the max value), and 3 (1/8 of
+		the max value). It's visible only on platforms that support
+		the capability.
+
+What:		/sys/bus/dsa/devices/wq<m>.<n>/dsa<x>\!wq<m>.<n>/file<y>/cr_faults
+Date:		Sept 14, 2022
+KernelVersion:	6.4.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Show the number of Completion Record (CR) faults this application
+		has caused.
+
+What:		/sys/bus/dsa/devices/wq<m>.<n>/dsa<x>\!wq<m>.<n>/file<y>/cr_fault_failures
+Date:		Sept 14, 2022
+KernelVersion:	6.4.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Show the number of Completion Record (CR) faults failures that this
+		application has caused. The failure counter is incremented when the
+		driver cannot fault in the address for the CR. Typically this is caused
+		by a bad address programmed in the submitted descriptor or a malicious
+		submitter is using bad CR address on purpose.
+
+What:		/sys/bus/dsa/devices/wq<m>.<n>/dsa<x>\!wq<m>.<n>/file<y>/pid
+Date:		Sept 14, 2022
+KernelVersion:	6.4.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Show the process id of the application that opened the file. This is
+		helpful information for a monitor daemon that wants to kill the
+		application that opened the file.
diff --git a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
index f5724bb5b462..c3fec3c835af 100644
--- a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
+++ b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
@@ -113,3 +113,144 @@ Description:
 		    # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
 
 Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+Date:		Feb 2022
+KernelVersion:	5.18
+Contact:	"Ronak Jain" <ronak.jain@xilinx.com>
+Description:
+		This sysfs interface allows user to configure features at
+		runtime. The user can enable or disable features running at
+		firmware as well as the user can configure the parameters of
+		the features at runtime. The supported features are over
+		temperature and external watchdog. Here, the external watchdog
+		is completely different than the /dev/watchdog as the external
+		watchdog is running on the firmware and it is used to monitor
+		the health of firmware not APU(Linux). Also, the external
+		watchdog is interfaced outside of the zynqmp soc.
+
+		The supported config ids are for the feature configuration is,
+		1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or
+		disable the over temperature feature.
+		2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the
+		over temperature limit in Degree Celsius.
+		3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable
+		the external watchdog feature.
+		4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the
+		external watchdog feature.
+
+		Usage:
+
+		Select over temperature config ID to enable/disable feature
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+		Check over temperature config ID is selected or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		The expected result is 1.
+
+		Select over temperature config ID to configure OT limit
+		# echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+		Check over temperature config ID is selected or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		The expected result is 2.
+
+		Select external watchdog config ID to enable/disable feature
+		# echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+		Check external watchdog config ID is selected or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		The expected result is 3.
+
+		Select external watchdog config ID to configure time interval
+		# echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+		Check external watchdog config ID is selected or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		The expected result is 4.
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+Date:		Feb 2022
+KernelVersion:	5.18
+Contact:	"Ronak Jain" <ronak.jain@xilinx.com>
+Description:
+		This sysfs interface allows to configure features at runtime.
+		The user can enable or disable features running at firmware.
+		Also, the user can configure the parameters of the features
+		at runtime. The supported features are over temperature and
+		external watchdog. Here, the external watchdog is completely
+		different than the /dev/watchdog as the external watchdog is
+		running on the firmware and it is used to monitor the health
+		of firmware not APU(Linux). Also, the external watchdog is
+		interfaced outside of the zynqmp soc.
+
+		By default the features are disabled in the firmware. The user
+		can enable features by querying appropriate config id of the
+		features.
+
+		The default limit for the over temperature is 90 Degree Celsius.
+		The default timer interval for the external watchdog is 570ms.
+
+		The supported config ids are for the feature configuration is,
+		1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or
+		disable the over temperature feature.
+		2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the
+		over temperature limit in Degree Celsius.
+		3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable
+		the external watchdog feature.
+		4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the
+		external watchdog feature.
+
+		Usage:
+
+		Enable over temperature feature
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the over temperature feature is enabled or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 1.
+
+		Disable over temperature feature
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the over temperature feature is disabled or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 0.
+
+		Configure over temperature limit to 50 Degree Celsius
+		# echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 50 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the over temperature limit is configured or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 50.
+
+		Enable external watchdog feature
+		# echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the external watchdog feature is enabled or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 1.
+
+		Disable external watchdog feature
+		# echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the external watchdog feature is disabled or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 0.
+
+		Configure external watchdog timer interval to 500ms
+		# echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+		# echo 500 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+		Check whether the external watchdog timer interval is configured or not
+		# cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+		The expected result is 500.
+
+Users:		Xilinx
diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
index b2553df2e786..60953903d007 100644
--- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -1,7 +1,7 @@
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health
 Date:		June 2018
 KernelVersion:	4.19
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	This file shows ASIC health status. The possible values are:
 		0 - health failed, 2 - health OK, 3 - ASIC in booting state.
 
@@ -11,7 +11,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version
 Date:		June 2018
 KernelVersion:	4.19
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	These files show with which CPLD versions have been burned
 		on carrier and switch boards.
 
@@ -20,7 +20,7 @@ Description:	These files show with which CPLD versions have been burned
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir
 Date:		December 2018
 KernelVersion:	5.0
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	This file shows the system fans direction:
 		forward direction - relevant bit is set 0;
 		reversed direction - relevant bit is set 1.
@@ -30,7 +30,7 @@ Description:	This file shows the system fans direction:
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
 Date:		November 2018
 KernelVersion:	5.0
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	These files show with which CPLD versions have been burned
 		on LED or Gearbox board.
 
@@ -39,7 +39,7 @@ Description:	These files show with which CPLD versions have been burned
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
 Date:		November 2018
 KernelVersion:	5.0
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	These files enable and disable the access to the JTAG domain.
 		By default access to the JTAG domain is disabled.
 
@@ -48,7 +48,7 @@ Description:	These files enable and disable the access to the JTAG domain.
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
 Date:		June 2018
 KernelVersion:	4.19
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	This file allows iio devices selection.
 
 		Attribute select_iio can be written with 0 or with 1. It
@@ -62,7 +62,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on
 		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down
 Date:		June 2018
 KernelVersion:	4.19
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	These files allow asserting system power cycling, switching
 		power supply units on and off and system's main power domain
 		shutdown.
@@ -89,7 +89,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset
 Date:		June 2018
 KernelVersion:	4.19
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	These files show the system reset cause, as following: power
 		auxiliary outage or power refresh, ASIC thermal shutdown, halt,
 		hotswap, watchdog, firmware reset, long press power button,
@@ -106,7 +106,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail
 Date:		November 2018
 KernelVersion:	5.0
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	These files show the system reset cause, as following: ComEx
 		power fail, reset from ComEx, system platform reset, reset
 		due to voltage monitor devices upgrade failure,
@@ -119,7 +119,7 @@ Description:	These files show the system reset cause, as following: ComEx
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
 Date:		November 2018
 KernelVersion:	5.0
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	These files show with which CPLD versions have been burned
 		on LED board.
 
@@ -133,7 +133,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
 Date:		June 2019
 KernelVersion:	5.3
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	These files show the system reset cause, as following:
 		COMEX thermal shutdown; wathchdog power off or reset was derived
 		by one of the next components: COMEX, switch board or by Small Form
@@ -148,7 +148,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	These files show system static topology identification
 		like system's static I2C topology, number and type of FPGA
 		devices within the system and so on.
@@ -161,7 +161,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	These files show the system reset causes, as following: reset
 		due to AC power failure, reset invoked from software by
 		assertion reset signal through CPLD. reset caused by signal
@@ -173,7 +173,7 @@ Description:	These files show the system reset causes, as following: reset
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	This file allows to retain ASIC up during PCIe root complex
 		reset, when attribute is set 1.
 
@@ -182,7 +182,7 @@ Description:	This file allows to retain ASIC up during PCIe root complex
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	This file allows to overwrite system VPD hardware write
 		protection when attribute is set 1.
 
@@ -191,7 +191,7 @@ Description:	This file allows to overwrite system VPD hardware write
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	This file exposes the configuration update status of burnable
 		voltage regulator devices. The status values are as following:
 		0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
@@ -201,7 +201,7 @@ Description:	This file exposes the configuration update status of burnable
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
 Date:		January 2020
 KernelVersion:	5.6
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	This file exposes the firmware version of burnable voltage
 		regulator devices.
 
@@ -217,9 +217,448 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min
 Date:		July 2020
 KernelVersion:	5.9
-Contact:	Vadim Pasternak <vadimpmellanox.com>
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
 Description:	These files show with which CPLD part numbers and minor
 		versions have been burned CPLD devices equipped on a
 		system.
 
 		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_active_image
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_auth_fail
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/bios_upgrade_fail
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	The files represent BIOS statuses:
+
+		bios_active_image: location of current active BIOS image:
+		0: Top, 1: Bottom.
+		The reported value should correspond to value expected by OS
+		in case of BIOS safe mode is 0. This bit is related to Intel
+		top-swap feature of DualBios on the same flash.
+
+		bios_auth_fail: BIOS upgrade is failed because provided BIOS
+		image is not signed correctly.
+
+		bios_upgrade_fail: BIOS upgrade is failed by some other
+		reason not because authentication. For example due to
+		physical SPI flash problem.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_enable
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_enable
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_enable
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_enable
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_enable
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_enable
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_enable
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_enable
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files allow line cards enable state control.
+		Expected behavior:
+		When  lc{n}_enable is written 1, related line card is released
+		from the reset state, when 0 - is hold in reset state.
+
+		The files are read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_pwr
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_pwr
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_pwr
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_pwr
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_pwr
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_pwr
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_pwr
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_pwr
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files switching line cards power on and off.
+		Expected behavior:
+		When  lc{n}_pwr is written 1, related line card is powered
+		on, when written 0 - powered off.
+
+		The files are read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc1_rst_mask
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc2_rst_mask
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc3_rst_mask
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc4_rst_mask
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc5_rst_mask
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc6_rst_mask
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc7_rst_mask
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/lc8_rst_mask
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files clear line card reset bit enforced by ASIC, when it
+		sets it due to some abnormal ASIC behavior.
+		Expected behavior:
+		When lc{n}_rst_mask is written 1, related line card reset bit
+		is cleared, when written 0 - no effect.
+
+		The files are write only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/os_started
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file, when written 1, indicates to programmable devices
+		that OS is taking control over it.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pm_mgmt_en
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file assigns power management control ownership.
+		When power management control is provided by hardware, hardware
+		will automatically power off one or more line previously
+		powered line cards in case system power budget is getting
+		insufficient. It could be in case when some of power units lost
+		power good state.
+		When pm_mgmt_en is written 1, power management control by
+		software is enabled, 0 - power management control by hardware.
+		Note that for any setting of pm_mgmt_en attribute hardware will
+		not allow to power on any new line card in case system power
+		budget is insufficient.
+		Same in case software will try to power on several line cards
+		at once - hardware will power line cards while system has
+		enough power budget.
+		Default is 0.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu3_on
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu4_on
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files switching power supply units on and off.
+		Expected behavior:
+		When  psu3_on or psu4_on is written 1, related unit will be
+		disconnected from the power source, when written 0 - connected.
+
+		The files are write only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/shutdown_unlock
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file allows to unlock ASIC after thermal shutdown event.
+		When system thermal shutdown is enforced by ASIC, ASIC is
+		getting locked and after system boot it will not be available.
+		Software can decide to unlock it by setting this attribute to
+		1 and then perform system power cycle by setting pwr_cycle
+		attribute to 1 (power cycle of main power domain).
+		Before setting shutdown_unlock to 1 it is recommended to
+		validate that system reboot cause is reset_asic_thermal or
+		reset_thermal_spc_or_pciesw.
+		In case shutdown_unlock is not set 1, the only way to release
+		ASIC from locking - is full system power cycle through the
+		external power distribution unit.
+		Default is 1.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_pn
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld1_version_min
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files show with which CPLD major and minor versions
+		and part number has been burned CPLD device on line card.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_pn
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga1_version_min
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files show with which FPGA major and minor versions
+		and part number has been burned FPGA device on line card.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/vpd_wp
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file allow to overwrite line card VPD hardware write
+		protection mode. When attribute is set 1 - write protection is
+		disabled, when 0 - enabled.
+		Default is 0.
+		If the system is in locked-down mode writing this file will not
+		be allowed.
+		The purpose if this file is to allow line card VPD burning
+		during production flow.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_aux_pwr_or_ref
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_dc_dc_pwr_fail
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_fpga_not_done
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_from_chassis
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_line_card
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/reset_pwr_off_from_chassis
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files show the line reset cause, as following: power
+		auxiliary outage or power refresh, DC-to-DC power failure, FPGA reset
+		failed, line card reset failed, power off from chassis.
+		Value 1 in file means this is reset cause, 0 - otherwise. Only one of
+		the above causes could be 1 at the same time, representing only last
+		reset cause.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/cpld_upgrade_en
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_upgrade_en
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files allow CPLD and FPGA burning. Value 1 in file means burning
+		is enabled, 0 - otherwise.
+		If the system is in locked-down mode writing these files will
+		not be allowed.
+		The purpose of these files to allow line card CPLD and FPGA
+		upgrade through the JTAG daisy-chain.
+
+		The files are read/write.
+
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/qsfp_pwr_en
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/pwr_en
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files allow to power on/off all QSFP ports and whole line card.
+		The attributes are set 1 for power on, 0 - for power off.
+
+		The files are read/write.
+
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/agb_spi_burn_en
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/fpga_spi_burn_en
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files allow gearboxes and FPGA SPI flash burning.
+		The attributes are set 1 to enable burning, 0 - to disable.
+		If the system is in locked-down mode writing these files will
+		not be allowed.
+		The purpose of these files to allow line card Gearboxes and FPGA
+		burning during production flow.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/max_power
+What:		/sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/i2c-*/*-0032/mlxreg-io.*/hwmon/hwmon*/config
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files provide the maximum powered required for line card
+		feeding and line card configuration Id.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/phy_reset
+Date:		May 2022
+KernelVersion:	5.19
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file allows to reset PHY 88E1548 when attribute is set 0
+		due to some abnormal PHY behavior.
+		Expected behavior:
+		When phy_reset is written 1, all PHY 88E1548 are released
+		from the reset state, when 0 - are hold in reset state.
+
+		The files are read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/mac_reset
+Date:		May 2022
+KernelVersion:	5.19
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file allows to reset ASIC MT52132 when attribute is set 0
+		due to some abnormal ASIC behavior.
+		Expected behavior:
+		When mac_reset is written 1, the ASIC MT52132 is released
+		from the reset state, when 0 - is hold in reset state.
+
+		The files are read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/qsfp_pwr_good
+Date:		May 2022
+KernelVersion:	5.19
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file shows QSFP ports power status. The value is set to 0
+		when one of any QSFP ports is plugged. The value is set to 1 when
+		there are no any QSFP ports are plugged.
+		The possible values are:
+		0 - Power good, 1 - Not power good.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_health
+Date:		July 2022
+KernelVersion:	5.20
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file shows 2-nd ASIC health status. The possible values are:
+		0 - health failed, 2 - health OK, 3 - ASIC in booting state.
+
+		The file is read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_reset
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic2_reset
+Date:		July 2022
+KernelVersion:	5.20
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files allow to each of ASICs by writing 1.
+
+		The files are write only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/comm_chnl_ready
+Date:		July 2022
+KernelVersion:	5.20
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file is used to indicate remote end (for example BMC) that system
+	        host CPU is ready for sending telemetry data to remote end.
+		For indication the file should be written 1.
+
+		The file is write only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config3
+Date:		January 2020
+KernelVersion:	5.6
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	The file indicates COME module hardware configuration.
+		The value is pushed by hardware through GPIO pins.
+		The purpose is to expose some minor BOM changes for the same system SKU.
+
+		The file is read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_pwr_converter_fail
+Date:		February 2023
+KernelVersion:	6.3
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file shows the system reset cause due to power converter
+		devices failure.
+		Value 1 in file means this is reset cause, 0 - otherwise.
+
+		The file is read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_ap_reset
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_ap_reset
+Date:		February 2023
+KernelVersion:	6.3
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files aim to monitor the status of the External Root of Trust (EROT)
+		processor's RESET output to the Application Processor (AP).
+		By reading this file, could be determined if the EROT has invalidated or
+		revoked AP Firmware, at which point it will hold the AP in RESET until a
+		valid firmware is loaded. This protects the AP from running an
+		unauthorized firmware. In the normal flow, the AP reset should be released
+		after the EROT validates the integrity of the FW, and it should be done so
+		as quickly as possible so that the AP boots before the CPU starts to
+		communicate to each ASIC.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_recovery
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_recovery
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_reset
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_reset
+Date:		February 2023
+KernelVersion:	6.3
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files aim to perform External Root of Trust (EROT) recovery
+		sequence after EROT device failure.
+		These EROT devices protect ASICs from unauthorized access and in normal
+		flow their reset should be released with system power – earliest power
+		up stage, so that EROTs can begin boot and authentication process before
+		CPU starts to communicate to ASICs.
+		Issuing a reset to the EROT while asserting the recovery signal will cause
+		the EROT Application Processor to enter recovery mode so that the EROT FW
+		can be updated/recovered.
+		For reset/recovery the related file should be toggled by 1/0.
+
+		The files are read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot1_wp
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/erot2_wp
+Date:		February 2023
+KernelVersion:	6.3
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	These files allow access to External Root of Trust (EROT) for reset
+		and recovery sequence after EROT device failure.
+		Default is 0 (programming disabled).
+		If the system is in locked-down mode writing this file will not be allowed.
+
+		The files are read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/spi_chnl_select
+Date:		February 2023
+KernelVersion:	6.3
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file allows SPI chip selection for External Root of Trust (EROT)
+		device Out-of-Band recovery.
+		File can be written with 0 or with 1. It selects which EROT can be accessed
+		through SPI device.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_pg_fail
+Date:		February 2023
+KernelVersion:	6.3
+Contact:	Vadim Pasternak vadimp@nvidia.com
+Description:	This file shows ASIC Power Good status.
+		Value 1 in file means ASIC Power Good failed, 0 - otherwise.
+
+		The file is read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd1_boot_fail
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd2_boot_fail
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd_fail
+Date:		February 2023
+KernelVersion:	6.3
+Contact:	Vadim Pasternak vadimp@nvidia.com
+Description:	These files are related to clock boards status in system.
+		- clk_brd1_boot_fail: warning about 1-st clock board failed to boot from CI.
+		- clk_brd2_boot_fail: warning about 2-nd clock board failed to boot from CI.
+		- clk_brd_fail: error about common clock board boot failure.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/clk_brd_prog_en
+Date:		February 2023
+KernelVersion:	6.3
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file enables programming of clock boards.
+		Default is 0 (programming disabled).
+		If the system is in locked-down mode writing this file will not be allowed.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_converter_prog_en
+Date:		February 2023
+KernelVersion:	6.3
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file enables programming of power converters.
+		Default is 0 (programming disabled).
+		If the system is in locked-down mode writing this file will not be allowed.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_ok_fail
+Date:		February 2023
+KernelVersion:	6.3
+Contact:	Vadim Pasternak <vadimp@nvidia.com>
+Description:	This file shows the system reset cause due to AC power failure.
+		Value 1 in file means this is reset cause, 0 - otherwise.
+
+		The file is read only.
diff --git a/Documentation/ABI/stable/sysfs-driver-speakup b/Documentation/ABI/stable/sysfs-driver-speakup
index dc2a6ba1674b..bcb6831aa114 100644
--- a/Documentation/ABI/stable/sysfs-driver-speakup
+++ b/Documentation/ABI/stable/sysfs-driver-speakup
@@ -35,6 +35,15 @@ Description:	This controls cursor delay when using arrow keys. When a
 		characters. Set this to a higher value to adjust for the delay
 		and better synchronisation between cursor position and speech.
 
+What:		/sys/accessibility/speakup/cur_phonetic
+KernelVersion:	6.2
+Contact:	speakup@linux-speakup.org
+Description:	This allows speakup to speak letters phoneticaly when arrowing through
+		a word letter by letter. This doesn't affect the spelling when typing
+		the characters. When cur_phonetic=1, speakup will speak characters
+		phoneticaly when arrowing over a letter. When cur_phonetic=0, speakup
+		will speak letters as normally.
+
 What:		/sys/accessibility/speakup/delimiters
 KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
diff --git a/Documentation/ABI/stable/sysfs-hypervisor-xen b/Documentation/ABI/stable/sysfs-hypervisor-xen
index 748593c64568..be9ca9981bb1 100644
--- a/Documentation/ABI/stable/sysfs-hypervisor-xen
+++ b/Documentation/ABI/stable/sysfs-hypervisor-xen
@@ -120,3 +120,16 @@ Contact:	xen-devel@lists.xenproject.org
 Description:	If running under Xen:
 		The Xen version is in the format <major>.<minor><extra>
 		This is the <minor> part of it.
+
+What:		/sys/hypervisor/start_flags/*
+Date:		March 2023
+KernelVersion:	6.3.0
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		All bits in Xen's start-flags are represented as
+		boolean files, returning '1' if set, '0' otherwise.
+		This takes the place of the defunct /proc/xen/capabilities,
+		which would contain "control_d" on dom0, and be empty
+		otherwise.  This flag is now exposed as "initdomain" in
+		addition to the "privileged" flag; all other possible flags
+		are accessible as "unknownXX".
diff --git a/Documentation/ABI/stable/sysfs-module b/Documentation/ABI/stable/sysfs-module
index 6272ae5fb366..41b1f16e8795 100644
--- a/Documentation/ABI/stable/sysfs-module
+++ b/Documentation/ABI/stable/sysfs-module
@@ -1,8 +1,7 @@
-What:		/sys/module
-Description:
-	The /sys/module tree consists of the following structure:
+The /sys/module tree consists of the following structure:
 
-	/sys/module/MODULENAME
+What:		/sys/module/<MODULENAME>
+Description:
 		The name of the module that is in the kernel.  This
 		module name will always show up if the module is loaded as a
 		dynamic module.  If it is built directly into the kernel, it
@@ -12,7 +11,8 @@ Description:
 		Note: The conditions of creation in the built-in case are not
 		by design and may be removed in the future.
 
-	/sys/module/MODULENAME/parameters
+What:		/sys/module/<MODULENAME>/parameters
+Description:
 		This directory contains individual files that are each
 		individual parameters of the module that are able to be
 		changed at runtime.  See the individual module
@@ -25,10 +25,23 @@ Description:
 		individual driver documentation for details as to the
 		stability of the different parameters.
 
-	/sys/module/MODULENAME/refcnt
+What:		/sys/module/<MODULENAME>/refcnt
+Description:
 		If the module is able to be unloaded from the kernel, this file
 		will contain the current reference count of the module.
 
 		Note: If the module is built into the kernel, or if the
 		CONFIG_MODULE_UNLOAD kernel configuration value is not enabled,
 		this file will not be present.
+
+What:		/sys/module/<MODULENAME>/srcversion
+Date:		Jun 2005
+Description:
+		If the module source has MODULE_VERSION, this file will contain
+		the checksum of the source code.
+
+What:		/sys/module/<MODULENAME>/version
+Date:		Jun 2005
+Description:
+		If the module source has MODULE_VERSION, this file will contain
+		the version of the source code.
diff --git a/Documentation/ABI/testing/configfs-usb-gadget b/Documentation/ABI/testing/configfs-usb-gadget
index b7943aa7e997..a8bb896def54 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget
+++ b/Documentation/ABI/testing/configfs-usb-gadget
@@ -143,3 +143,16 @@ Description:
 		qw_sign		an identifier to be reported as "OS String"
 				proper
 		=============	===============================================
+
+What:		/config/usb-gadget/gadget/webusb
+Date:		Dec 2022
+KernelVersion:	6.3
+Description:
+		This group contains "WebUSB" extension handling attributes.
+
+		=============	===============================================
+		use		flag turning "WebUSB" support on/off
+		bcdVersion	bcd WebUSB specification version number
+		bVendorCode	one-byte value used for custom per-device
+		landingPage	UTF-8 encoded URL of the device's landing page
+		=============	===============================================
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-mass-storage b/Documentation/ABI/testing/configfs-usb-gadget-mass-storage
index c86b63a7bb43..fc0328069267 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-mass-storage
+++ b/Documentation/ABI/testing/configfs-usb-gadget-mass-storage
@@ -19,7 +19,7 @@ KernelVersion:	3.13
 Description:
 		The attributes:
 
-		===========	==============================================
+		============	==============================================
 		file		The path to the backing file for the LUN.
 				Required if LUN is not marked as removable.
 		ro		Flag specifying access to the LUN shall be
@@ -32,4 +32,10 @@ Description:
 				being a CD-ROM.
 		nofua		Flag specifying that FUA flag
 				in SCSI WRITE(10,12)
-		===========	==============================================
+		forced_eject	This write-only file is useful only when
+				the function is active. It causes the backing
+				file to be forcibly detached from the LUN,
+				regardless of whether the host has allowed it.
+				Any non-zero number of bytes written will
+				result in ejection.
+		============	==============================================
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uac1 b/Documentation/ABI/testing/configfs-usb-gadget-uac1
index dd647d44d975..c4ba92f004c3 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-uac1
+++ b/Documentation/ABI/testing/configfs-usb-gadget-uac1
@@ -4,23 +4,30 @@ KernelVersion:	4.14
 Description:
 		The attributes:
 
-		==========	===================================
-		c_chmask	capture channel mask
-		c_srate		capture sampling rate
-		c_ssize		capture sample size (bytes)
-		c_mute_present	capture mute control enable
+		=====================	=======================================
+		c_chmask		capture channel mask
+		c_srate			list of capture sampling rates (comma-separated)
+		c_ssize			capture sample size (bytes)
+		c_mute_present		capture mute control enable
 		c_volume_present	capture volume control enable
-		c_volume_min	capture volume control min value (in 1/256 dB)
-		c_volume_max	capture volume control max value (in 1/256 dB)
-		c_volume_res	capture volume control resolution (in 1/256 dB)
-		p_chmask	playback channel mask
-		p_srate		playback sampling rate
-		p_ssize		playback sample size (bytes)
-		p_mute_present	playback mute control enable
+		c_volume_min		capture volume control min value
+					(in 1/256 dB)
+		c_volume_max		capture volume control max value
+					(in 1/256 dB)
+		c_volume_res		capture volume control resolution
+					(in 1/256 dB)
+		p_chmask		playback channel mask
+		p_srate			list of playback sampling rates (comma-separated)
+		p_ssize			playback sample size (bytes)
+		p_mute_present		playback mute control enable
 		p_volume_present	playback volume control enable
-		p_volume_min	playback volume control min value (in 1/256 dB)
-		p_volume_max	playback volume control max value (in 1/256 dB)
-		p_volume_res	playback volume control resolution (in 1/256 dB)
-		req_number	the number of pre-allocated request
-				for both capture and playback
-		==========	===================================
+		p_volume_min		playback volume control min value
+					(in 1/256 dB)
+		p_volume_max		playback volume control max value
+					(in 1/256 dB)
+		p_volume_res		playback volume control resolution
+					(in 1/256 dB)
+		req_number		the number of pre-allocated requests
+					for both capture and playback
+		function_name		name of the interface
+		=====================	=======================================
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uac2 b/Documentation/ABI/testing/configfs-usb-gadget-uac2
index cfd160ff8b56..3371c39f651d 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-uac2
+++ b/Documentation/ABI/testing/configfs-usb-gadget-uac2
@@ -4,23 +4,35 @@ KernelVersion:	3.18
 Description:
 		The attributes:
 
-		=========  ============================
-		c_chmask   capture channel mask
-		c_srate    capture sampling rate
-		c_ssize    capture sample size (bytes)
-		c_sync     capture synchronization type (async/adaptive)
-		c_mute_present	capture mute control enable
+		=====================	=======================================
+		c_chmask		capture channel mask
+		c_srate			list of capture sampling rates (comma-separated)
+		c_ssize			capture sample size (bytes)
+		c_hs_bint		capture bInterval for HS/SS (1-4: fixed, 0: auto)
+		c_sync			capture synchronization type
+					(async/adaptive)
+		c_mute_present		capture mute control enable
 		c_volume_present	capture volume control enable
-		c_volume_min	capture volume control min value (in 1/256 dB)
-		c_volume_max	capture volume control max value (in 1/256 dB)
-		c_volume_res	capture volume control resolution (in 1/256 dB)
-		fb_max     maximum extra bandwidth in async mode
-		p_chmask   playback channel mask
-		p_srate    playback sampling rate
-		p_ssize    playback sample size (bytes)
-		p_mute_present	playback mute control enable
+		c_volume_min		capture volume control min value
+					(in 1/256 dB)
+		c_volume_max		capture volume control max value
+					(in 1/256 dB)
+		c_volume_res		capture volume control resolution
+					(in 1/256 dB)
+		fb_max			maximum extra bandwidth in async mode
+		p_chmask		playback channel mask
+		p_srate			list of playback sampling rates (comma-separated)
+		p_ssize			playback sample size (bytes)
+		p_hs_bint		playback bInterval for HS/SS (1-4: fixed, 0: auto)
+		p_mute_present		playback mute control enable
 		p_volume_present	playback volume control enable
-		p_volume_min	playback volume control min value (in 1/256 dB)
-		p_volume_max	playback volume control max value (in 1/256 dB)
-		p_volume_res	playback volume control resolution (in 1/256 dB)
-		=========  ============================
+		p_volume_min		playback volume control min value
+					(in 1/256 dB)
+		p_volume_max		playback volume control max value
+					(in 1/256 dB)
+		p_volume_res		playback volume control resolution
+					(in 1/256 dB)
+		req_number		the number of pre-allocated requests
+					for both capture and playback
+		function_name		name of the interface
+		=====================	=======================================
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc
index 889ed45be4ca..4feb692c4c1d 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-uvc
+++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc
@@ -7,6 +7,7 @@ Description:	UVC function directory
 		streaming_maxburst	0..15 (ss only)
 		streaming_maxpacket	1..1023 (fs), 1..3072 (hs/ss)
 		streaming_interval	1..16
+		function_name		string [32]
 		===================	=============================
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control
@@ -14,12 +15,14 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Control descriptors
 
-		All attributes read only:
+		All attributes read only except enable_interrupt_ep:
 
-		================	=============================
+		===================	=============================
 		bInterfaceNumber	USB interface number for this
 					streaming interface
-		================	=============================
+		enable_interrupt_ep	flag to enable the interrupt
+					endpoint for the VC interface
+		===================	=============================
 
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/class
 Date:		Dec 2014
@@ -51,7 +54,7 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Default output terminal descriptors
 
-		All attributes read only:
+		All attributes read only except bSourceID:
 
 		==============	=============================================
 		iTerminal	index of string descriptor
@@ -73,7 +76,7 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Default camera terminal descriptors
 
-		All attributes read only:
+		All attributes read only except bmControls, which is read/write:
 
 		========================  ====================================
 		bmControls		  bitmap specifying which controls are
@@ -98,7 +101,7 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Default processing unit descriptors
 
-		All attributes read only:
+		All attributes read only except bmControls, which is read/write:
 
 		===============	========================================
 		iProcessing	index of string descriptor
@@ -110,6 +113,34 @@ Description:	Default processing unit descriptors
 		bUnitID		a non-zero id of this unit
 		===============	========================================
 
+What:		/config/usb-gadget/gadget/functions/uvc.name/control/extensions
+Date:		Nov 2022
+KernelVersion:	6.1
+Description:	Extension unit descriptors
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/control/extensions/name
+Date:		Nov 2022
+KernelVersion:	6.1
+Description:	Extension Unit (XU) Descriptor
+
+		bLength, bUnitID and iExtension are read-only. All others are
+		read-write.
+
+		=================	========================================
+		bLength			size of the descriptor in bytes
+		bUnitID			non-zero ID of this unit
+		guidExtensionCode	Vendor-specific code identifying the XU
+		bNumControls		number of controls in this XU
+		bNrInPins		number of input pins for this unit
+		baSourceID		list of the IDs of the units or terminals
+					to which this XU is connected
+		bControlSize		size of the bmControls field in bytes
+		bmControls		list of bitmaps detailing which vendor
+					specific controls are supported
+		iExtension		index of a string descriptor that describes
+					this extension unit
+		=================	========================================
+
 What:		/config/usb-gadget/gadget/functions/uvc.name/control/header
 Date:		Dec 2014
 KernelVersion:	4.0
@@ -164,7 +195,24 @@ Date:		Dec 2014
 KernelVersion:	4.0
 Description:	Default color matching descriptors
 
-		All attributes read only:
+		All attributes read/write:
+
+		========================  ======================================
+		bMatrixCoefficients	  matrix used to compute luma and
+					  chroma values from the color primaries
+		bTransferCharacteristics  optoelectronic transfer
+					  characteristic of the source picture,
+					  also called the gamma function
+		bColorPrimaries		  color primaries and the reference
+					  white
+		========================  ======================================
+
+What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/color_matching/name
+Date:		Dec 2022
+KernelVersion:	6.3
+Description:	Additional color matching descriptors
+
+		All attributes read/write:
 
 		========================  ======================================
 		bMatrixCoefficients	  matrix used to compute luma and
@@ -196,7 +244,7 @@ Description:	Specific MJPEG format descriptors
 					read-only
 		bmaControls		this format's data for bmaControls in
 					the streaming header
-		bmInterfaceFlags	specifies interlace information,
+		bmInterlaceFlags	specifies interlace information,
 					read-only
 		bAspectRatioY		the X dimension of the picture aspect
 					ratio, read-only
@@ -252,7 +300,7 @@ Description:	Specific uncompressed format descriptors
 					read-only
 		bmaControls		this format's data for bmaControls in
 					the streaming header
-		bmInterfaceFlags	specifies interlace information,
+		bmInterlaceFlags	specifies interlace information,
 					read-only
 		bAspectRatioY		the X dimension of the picture aspect
 					ratio, read-only
diff --git a/Documentation/ABI/testing/debugfs-cros-ec b/Documentation/ABI/testing/debugfs-cros-ec
index 1fe0add99a2a..9a040c6f5e03 100644
--- a/Documentation/ABI/testing/debugfs-cros-ec
+++ b/Documentation/ABI/testing/debugfs-cros-ec
@@ -54,3 +54,25 @@ Description:
 		this feature.
 
 		Output will be in the format: "0x%08x\n".
+
+What:		/sys/kernel/debug/<cros-ec-device>/suspend_timeout_ms
+Date:		August 2022
+KernelVersion:	6.1
+Description:
+		Some ECs have a feature where they will track transitions of
+		a hardware-controlled sleep line, such as Intel's SLP_S0 line,
+		in order to detect cases where a system failed to go into deep
+		sleep states. The suspend_timeout_ms file controls the amount of
+		time in milliseconds the EC will wait before declaring a sleep
+		timeout event and attempting to wake the system.
+
+		Supply 0 to use the default value coded into EC firmware. Supply
+		65535 (EC_HOST_SLEEP_TIMEOUT_INFINITE) to disable the EC sleep
+		failure detection mechanism. Values in between 0 and 65535
+		indicate the number of milliseconds the EC should wait after a
+		sleep transition before declaring a timeout. This includes both
+		the duration after a sleep command was received but before the
+		hardware line changed, as well as the duration between when the
+		hardware line changed and the kernel sent an EC resume command.
+
+		Output will be in the format: "%u\n".
diff --git a/Documentation/ABI/testing/debugfs-cxl b/Documentation/ABI/testing/debugfs-cxl
new file mode 100644
index 000000000000..fe61d372e3fa
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-cxl
@@ -0,0 +1,35 @@
+What:		/sys/kernel/debug/cxl/memX/inject_poison
+Date:		April, 2023
+KernelVersion:	v6.4
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(WO) When a Device Physical Address (DPA) is written to this
+		attribute, the memdev driver sends an inject poison command to
+		the device for the specified address. The DPA must be 64-byte
+		aligned and the length of the injected poison is 64-bytes. If
+		successful, the device returns poison when the address is
+		accessed through the CXL.mem bus. Injecting poison adds the
+		address to the device's Poison List and the error source is set
+		to Injected. In addition, the device adds a poison creation
+		event to its internal Informational Event log, updates the
+		Event Status register, and if configured, interrupts the host.
+		It is not an error to inject poison into an address that
+		already has poison present and no error is returned. The
+		inject_poison attribute is only visible for devices supporting
+		the capability.
+
+
+What:		/sys/kernel/debug/memX/clear_poison
+Date:		April, 2023
+KernelVersion:	v6.4
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(WO) When a Device Physical Address (DPA) is written to this
+		attribute, the memdev driver sends a clear poison command to
+		the device for the specified address. Clearing poison removes
+		the address from the device's Poison List and writes 0 (zero)
+		for 64 bytes starting at address. It is not an error to clear
+		poison from an address that does not have poison set. If the
+		device cannot clear poison from the address, -ENXIO is returned.
+		The clear_poison attribute is only visible for devices
+		supporting the capability.
diff --git a/Documentation/ABI/testing/debugfs-dell-wmi-ddv b/Documentation/ABI/testing/debugfs-dell-wmi-ddv
new file mode 100644
index 000000000000..fbcc5d6f7388
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-dell-wmi-ddv
@@ -0,0 +1,21 @@
+What:		/sys/kernel/debug/dell-wmi-ddv-<wmi_device_name>/fan_sensor_information
+Date:		September 2022
+KernelVersion:	6.1
+Contact:	Armin Wolf <W_Armin@gmx.de>
+Description:
+		This file contains the contents of the fan sensor information buffer,
+		which contains fan sensor entries and a terminating character (0xFF).
+
+		Each fan sensor entry consists of three bytes with an unknown meaning,
+		interested people may use this file for reverse-engineering.
+
+What:		/sys/kernel/debug/dell-wmi-ddv-<wmi_device_name>/thermal_sensor_information
+Date:		September 2022
+KernelVersion:	6.1
+Contact:	Armin Wolf <W_Armin@gmx.de>
+Description:
+		This file contains the contents of the thermal sensor information buffer,
+		which contains thermal sensor entries and a terminating character (0xFF).
+
+		Each thermal sensor entry consists of five bytes with an unknown meaning,
+		interested people may use this file for reverse-engineering.
diff --git a/Documentation/ABI/testing/debugfs-driver-dcc b/Documentation/ABI/testing/debugfs-driver-dcc
new file mode 100644
index 000000000000..27ed5919d21b
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-driver-dcc
@@ -0,0 +1,127 @@
+What:           /sys/kernel/debug/dcc/.../ready
+Date:           December 2022
+Contact:        Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+		This file is used to check the status of the dcc
+		hardware if it's ready to receive user configurations.
+		A 'Y' here indicates dcc is ready.
+
+What:           /sys/kernel/debug/dcc/.../trigger
+Date:           December 2022
+Contact:        Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+		This is the debugfs interface for manual software
+		triggers. The trigger can be invoked by writing '1'
+		to the file.
+
+What:           /sys/kernel/debug/dcc/.../config_reset
+Date:           December 2022
+Contact:        Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+		This file is used to reset the configuration of
+		a dcc driver to the default configuration. When '1'
+		is written to the file, all the previous addresses
+		stored in the driver gets removed and users need to
+		reconfigure addresses again.
+
+What:           /sys/kernel/debug/dcc/.../[list-number]/config
+Date:		 December 2022
+Contact:        Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+		This stores the addresses of the registers which
+		can be read in case of a hardware crash or manual
+		software triggers. The input addresses type
+		can be one of following dcc instructions: read,
+		write, read-write, and loop type. The lists need to
+		be configured sequentially and not in a overlapping
+		manner; e.g. users can jump to list x only after
+		list y is configured and enabled. The input format for
+		each type is as follows:
+
+	        i) Read instruction
+
+		   ::
+
+		     echo R <addr> <n> <bus> >/sys/kernel/debug/dcc/../[list-number]/config
+
+		   where:
+
+		   <addr>
+			The address to be read.
+
+		   <n>
+			The addresses word count, starting from address <1>.
+			Each word is 32 bits (4 bytes). If omitted, defaulted
+			to 1.
+
+		   <bus type>
+			The bus type, which can be either 'apb' or 'ahb'.
+			The default is 'ahb' if leaved out.
+
+		ii) Write instruction
+
+		    ::
+
+		      echo W <addr> <n> <bus type> > /sys/kernel/debug/dcc/../[list-number]/config
+
+		    where:
+
+		    <addr>
+			The address to be written.
+
+		    <n>
+			The value to be written at <addr>.
+
+		    <bus type>
+			The bus type, which can be either 'apb' or 'ahb'.
+
+	        iii) Read-write instruction
+
+		     ::
+
+		       echo RW <addr> <n> <mask> > /sys/kernel/debug/dcc/../[list-number]/config
+
+		     where:
+
+		     <addr>
+			The address to be read and written.
+
+		     <n>
+		        The value to be written at <addr>.
+
+		     <mask>
+			The value mask.
+
+		iv) Loop instruction
+
+		    ::
+
+		      echo L <loop count> <address count> <address>... > /sys/kernel/debug/dcc/../[list-number]/config
+
+		    where:
+
+		    <loop count>
+			Number of iterations
+
+		    <address count>
+			total number of addresses to be written
+
+		    <address>
+			Space-separated list of addresses.
+
+What:           /sys/kernel/debug/dcc/.../[list-number]/enable
+Date:           December 2022
+Contact:        Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+		This debugfs interface is used for enabling the
+		the dcc hardware. A file named "enable" is in the
+		directory list number where users can enable/disable
+		the specific list by writing boolean (1 or 0) to the
+		file.
+
+		On enabling the dcc, all the addresses specified
+		by the user for the corresponding list is written
+		into dcc sram which is read by the dcc hardware
+		on manual or crash induced triggers. Lists must
+		be configured and enabled sequentially, e.g. list
+		2 can only be enabled when list 1 have so.
diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs
index 284e2dfa61cd..85f6d04f528b 100644
--- a/Documentation/ABI/testing/debugfs-driver-habanalabs
+++ b/Documentation/ABI/testing/debugfs-driver-habanalabs
@@ -12,24 +12,7 @@ What:           /sys/kernel/debug/habanalabs/hl<n>/clk_gate
 Date:           May 2020
 KernelVersion:  5.8
 Contact:        ogabbay@kernel.org
-Description:    Allow the root user to disable/enable in runtime the clock
-                gating mechanism in Gaudi. Due to how Gaudi is built, the
-                clock gating needs to be disabled in order to access the
-                registers of the TPC and MME engines. This is sometimes needed
-                during debug by the user and hence the user needs this option.
-                The user can supply a bitmask value, each bit represents
-                a different engine to disable/enable its clock gating feature.
-                The bitmask is composed of 20 bits:
-
-		=======   ============
-                0  -  7   DMA channels
-                8  - 11   MME engines
-                12 - 19   TPC engines
-		=======   ============
-
-                The bit's location of a specific engine can be determined
-                using (1 << GAUDI_ENGINE_ID_*). GAUDI_ENGINE_ID_* values
-                are defined in uapi habanalabs.h file in enum gaudi_engine_id
+Description:    This setting is now deprecated as clock gating is handled solely by the f/w
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/command_buffers
 Date:           Jan 2019
@@ -108,6 +91,13 @@ Description:    Enables the root user to set the device to specific state.
                 Valid values are "disable", "enable", "suspend", "resume".
                 User can read this property to see the valid values
 
+What:           /sys/kernel/debug/habanalabs/hl<n>/device_release_watchdog_timeout
+Date:           Oct 2022
+KernelVersion:  6.2
+Contact:        ttayar@habana.ai
+Description:    The watchdog timeout value in seconds for a device relese upon
+                certain error cases, after which the device is reset.
+
 What:           /sys/kernel/debug/habanalabs/hl<n>/dma_size
 Date:           Apr 2021
 KernelVersion:  5.13
@@ -118,6 +108,15 @@ Description:    Specify the size of the DMA transaction when using DMA to read
                 When the write is finished, the user can read the "data_dma"
                 blob
 
+What:           /sys/kernel/debug/habanalabs/hl<n>/dump_razwi_events
+Date:           Aug 2022
+KernelVersion:  5.20
+Contact:        fkassabri@habana.ai
+Description:    Dumps all razwi events to dmesg if exist.
+                After reading the status register of an existing event
+                the routine will clear the status register.
+                Usage: cat dump_razwi_events
+
 What:           /sys/kernel/debug/habanalabs/hl<n>/dump_security_violations
 Date:           Jan 2021
 KernelVersion:  5.12
@@ -138,14 +137,16 @@ Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Sets I2C device address for I2C transaction that is generated
-                by the device's CPU
+                by the device's CPU, Not available when device is loaded with secured
+                firmware
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_bus
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Sets I2C bus address for I2C transaction that is generated by
-                the device's CPU
+                the device's CPU, Not available when device is loaded with secured
+                firmware
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_data
 Date:           Jan 2019
@@ -153,32 +154,60 @@ KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Triggers an I2C transaction that is generated by the device's
                 CPU. Writing to this file generates a write transaction while
-                reading from the file generates a read transaction
+                reading from the file generates a read transaction, Not available
+                when device is loaded with secured firmware
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_len
+Date:           Dec 2021
+KernelVersion:  5.17
+Contact:        obitton@habana.ai
+Description:    Sets I2C length in bytes for I2C transaction that is generated by
+                the device's CPU, Not available when device is loaded with secured
+                firmware
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/i2c_reg
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Sets I2C register id for I2C transaction that is generated by
-                the device's CPU
+                the device's CPU, Not available when device is loaded with secured
+                firmware
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/led0
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
-Description:    Sets the state of the first S/W led on the device
+Description:    Sets the state of the first S/W led on the device, Not available
+                when device is loaded with secured firmware
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/led1
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
-Description:    Sets the state of the second S/W led on the device
+Description:    Sets the state of the second S/W led on the device, Not available
+                when device is loaded with secured firmware
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/led2
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
-Description:    Sets the state of the third S/W led on the device
+Description:    Sets the state of the third S/W led on the device, Not available
+                when device is loaded with secured firmware
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/memory_scrub
+Date:           May 2022
+KernelVersion:  5.19
+Contact:        dhirschfeld@habana.ai
+Description:    Allows the root user to scrub the dram memory. The scrubbing
+                value can be set using the debugfs file memory_scrub_val.
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/memory_scrub_val
+Date:           May 2022
+KernelVersion:  5.19
+Contact:        dhirschfeld@habana.ai
+Description:    The value to which the dram will be set to when the user
+                scrubs the dram using 'memory_scrub' debugfs file and
+                the scrubbing value when using module param 'memory_scrub'
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/mmu
 Date:           Jan 2019
@@ -200,6 +229,30 @@ Description:    Check and display page fault or access violation mmu errors for
                 echo "0x200" > /sys/kernel/debug/habanalabs/hl0/mmu_error
                 cat /sys/kernel/debug/habanalabs/hl0/mmu_error
 
+What:           /sys/kernel/debug/habanalabs/hl<n>/monitor_dump
+Date:           Mar 2022
+KernelVersion:  5.19
+Contact:        osharabi@habana.ai
+Description:    Allows the root user to dump monitors status from the device's
+                protected config space.
+                This property is a binary blob that contains the result of the
+                monitors registers dump.
+                This custom interface is needed (instead of using the generic
+                Linux user-space PCI mapping) because this space is protected
+                and cannot be accessed using PCI read.
+                This interface doesn't support concurrency in the same device.
+                Only supported on GAUDI.
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/monitor_dump_trig
+Date:           Mar 2022
+KernelVersion:  5.19
+Contact:        osharabi@habana.ai
+Description:    Triggers dump of monitor data. The value to trigger the operation
+                must be 1. Triggering the monitor dump operation initiates dump of
+                current registers values of all monitors.
+                When the write is finished, the user can read the "monitor_dump"
+                blob
+
 What:           /sys/kernel/debug/habanalabs/hl<n>/set_power_state
 Date:           Jan 2019
 KernelVersion:  5.1
@@ -232,6 +285,13 @@ KernelVersion:  5.6
 Contact:        ogabbay@kernel.org
 Description:    Sets the stop-on_error option for the device engines. Value of
                 "0" is for disable, otherwise enable.
+                Relevant only for GOYA and GAUDI.
+
+What:           /sys/kernel/debug/habanalabs/hl<n>/timeout_locked
+Date:           Sep 2021
+KernelVersion:  5.16
+Contact:        obitton@habana.ai
+Description:    Sets the command submission timeout value in seconds.
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/userptr
 Date:           Jan 2019
@@ -242,7 +302,7 @@ Description:    Displays a list with information about the currently user
                 to DMA addresses
 
 What:           /sys/kernel/debug/habanalabs/hl<n>/userptr_lookup
-Date:           Aug 2021
+Date:           Oct 2021
 KernelVersion:  5.15
 Contact:        ogabbay@kernel.org
 Description:    Allows to search for specific user pointers (user virtual
diff --git a/Documentation/ABI/testing/debugfs-hisi-hpre b/Documentation/ABI/testing/debugfs-hisi-hpre
index b4be5f1db4b7..82abf92df429 100644
--- a/Documentation/ABI/testing/debugfs-hisi-hpre
+++ b/Documentation/ABI/testing/debugfs-hisi-hpre
@@ -1,140 +1,164 @@
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/regs
-Date:           Sep 2019
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump debug registers from the HPRE cluster.
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/regs
+Date:		Sep 2019
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump debug registers from the HPRE cluster.
 		Only available for PF.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/cluster_ctrl
-Date:           Sep 2019
-Contact:        linux-crypto@vger.kernel.org
-Description:    Write the HPRE core selection in the cluster into this file,
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/cluster[0-3]/cluster_ctrl
+Date:		Sep 2019
+Contact:	linux-crypto@vger.kernel.org
+Description:	Write the HPRE core selection in the cluster into this file,
 		and then we can read the debug information of the core.
 		Only available for PF.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/rdclr_en
-Date:           Sep 2019
-Contact:        linux-crypto@vger.kernel.org
-Description:    HPRE cores debug registers read clear control. 1 means enable
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/rdclr_en
+Date:		Sep 2019
+Contact:	linux-crypto@vger.kernel.org
+Description:	HPRE cores debug registers read clear control. 1 means enable
 		register read clear, otherwise 0. Writing to this file has no
 		functional effect, only enable or disable counters clear after
 		reading of these registers.
 		Only available for PF.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/current_qm
-Date:           Sep 2019
-Contact:        linux-crypto@vger.kernel.org
-Description:    One HPRE controller has one PF and multiple VFs, each function
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/current_qm
+Date:		Sep 2019
+Contact:	linux-crypto@vger.kernel.org
+Description:	One HPRE controller has one PF and multiple VFs, each function
 		has a QM. Select the QM which below qm refers to.
 		Only available for PF.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/regs
-Date:           Sep 2019
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump debug registers from the HPRE.
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/alg_qos
+Date:		Jun 2021
+Contact:	linux-crypto@vger.kernel.org
+Description:	The <bdf> is related the function for PF and VF.
+		HPRE driver supports to configure each function's QoS, the driver
+		supports to write <bdf> value to alg_qos in the host. Such as
+		"echo <bdf> value > alg_qos". The qos value is 1~1000, means
+		1/1000~1000/1000 of total QoS. The driver reading alg_qos to
+		get related QoS in the host and VM, Such as "cat alg_qos".
+
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/regs
+Date:		Sep 2019
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump debug registers from the HPRE.
 		Only available for PF.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/regs
-Date:           Sep 2019
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump debug registers from the QM.
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/regs
+Date:		Sep 2019
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump debug registers from the QM.
 		Available for PF and VF in host. VF in guest currently only
 		has one debug register.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/current_q
-Date:           Sep 2019
-Contact:        linux-crypto@vger.kernel.org
-Description:    One QM may contain multiple queues. Select specific queue to
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/current_q
+Date:		Sep 2019
+Contact:	linux-crypto@vger.kernel.org
+Description:	One QM may contain multiple queues. Select specific queue to
 		show its debug registers in above regs.
 		Only available for PF.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/clear_enable
-Date:           Sep 2019
-Contact:        linux-crypto@vger.kernel.org
-Description:    QM debug registers(regs) read clear control. 1 means enable
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/clear_enable
+Date:		Sep 2019
+Contact:	linux-crypto@vger.kernel.org
+Description:	QM debug registers(regs) read clear control. 1 means enable
 		register read clear, otherwise 0.
 		Writing to this file has no functional effect, only enable or
 		disable counters clear after reading of these registers.
 		Only available for PF.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/err_irq
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the number of invalid interrupts for
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/err_irq
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the number of invalid interrupts for
 		QM task completion.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/aeq_irq
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the number of QM async event queue interrupts.
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/aeq_irq
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the number of QM async event queue interrupts.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/abnormal_irq
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the number of interrupts for QM abnormal event.
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/abnormal_irq
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the number of interrupts for QM abnormal event.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/create_qp_err
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the number of queue allocation errors.
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/create_qp_err
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the number of queue allocation errors.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/mb_err
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the number of failed QM mailbox commands.
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/mb_err
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the number of failed QM mailbox commands.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/qm/status
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the status of the QM.
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/status
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the status of the QM.
 		Four states: initiated, started, stopped and closed.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of sent requests.
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/qm/diff_regs
+Date:		Mar 2022
+Contact:	linux-crypto@vger.kernel.org
+Description:	QM debug registers(regs) read hardware register value. This
+		node is used to show the change of the qm register values. This
+		node can be help users to check the change of register values.
+
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/diff_regs
+Date:		Mar 2022
+Contact:	linux-crypto@vger.kernel.org
+Description:	HPRE debug registers(regs) read hardware register value. This
+		node is used to show the change of the register values. This
+		node can be help users to check the change of register values.
+
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of sent requests.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/recv_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of received requests.
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/recv_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of received requests.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_busy_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of requests sent
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_busy_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of requests sent
 		with returning busy.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_fail_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of completed but error requests.
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_fail_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of completed but error requests.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/invalid_req_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of invalid requests being received.
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/invalid_req_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of invalid requests being received.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/overtime_thrhld
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Set the threshold time for counting the request which is
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/overtime_thrhld
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Set the threshold time for counting the request which is
 		processed longer than the threshold.
 		0: disable(default), 1: 1 microsecond.
 		Available for both PF and VF, and take no other effect on HPRE.
 
-What:           /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/over_thrhld_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of time out requests.
+What:		/sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/over_thrhld_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of time out requests.
 		Available for both PF and VF, and take no other effect on HPRE.
diff --git a/Documentation/ABI/testing/debugfs-hisi-sec b/Documentation/ABI/testing/debugfs-hisi-sec
index 85feb4408e0f..93c530d1bf0f 100644
--- a/Documentation/ABI/testing/debugfs-hisi-sec
+++ b/Documentation/ABI/testing/debugfs-hisi-sec
@@ -1,113 +1,137 @@
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/clear_enable
-Date:           Oct 2019
-Contact:        linux-crypto@vger.kernel.org
-Description:    Enabling/disabling of clear action after reading
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/clear_enable
+Date:		Oct 2019
+Contact:	linux-crypto@vger.kernel.org
+Description:	Enabling/disabling of clear action after reading
 		the SEC debug registers.
 		0: disable, 1: enable.
 		Only available for PF, and take no other effect on SEC.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/current_qm
-Date:           Oct 2019
-Contact:        linux-crypto@vger.kernel.org
-Description:    One SEC controller has one PF and multiple VFs, each function
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/current_qm
+Date:		Oct 2019
+Contact:	linux-crypto@vger.kernel.org
+Description:	One SEC controller has one PF and multiple VFs, each function
 		has a QM. This file can be used to select the QM which below
 		qm refers to.
 		Only available for PF.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/qm_regs
-Date:           Oct 2019
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump of QM related debug registers.
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/alg_qos
+Date:		Jun 2021
+Contact:	linux-crypto@vger.kernel.org
+Description:	The <bdf> is related the function for PF and VF.
+		SEC driver supports to configure each function's QoS, the driver
+		supports to write <bdf> value to alg_qos in the host. Such as
+		"echo <bdf> value > alg_qos". The qos value is 1~1000, means
+		1/1000~1000/1000 of total QoS. The driver reading alg_qos to
+		get related QoS in the host and VM, Such as "cat alg_qos".
+
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/qm_regs
+Date:		Oct 2019
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump of QM related debug registers.
 		Available for PF and VF in host. VF in guest currently only
 		has one debug register.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/current_q
-Date:           Oct 2019
-Contact:        linux-crypto@vger.kernel.org
-Description:    One QM of SEC may contain multiple queues. Select specific
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/current_q
+Date:		Oct 2019
+Contact:	linux-crypto@vger.kernel.org
+Description:	One QM of SEC may contain multiple queues. Select specific
 		queue to show its debug registers in above 'regs'.
 		Only available for PF.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/clear_enable
-Date:           Oct 2019
-Contact:        linux-crypto@vger.kernel.org
-Description:    Enabling/disabling of clear action after reading
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/clear_enable
+Date:		Oct 2019
+Contact:	linux-crypto@vger.kernel.org
+Description:	Enabling/disabling of clear action after reading
 		the SEC's QM debug registers.
 		0: disable, 1: enable.
 		Only available for PF, and take no other effect on SEC.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/err_irq
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the number of invalid interrupts for
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/err_irq
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the number of invalid interrupts for
 		QM task completion.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/aeq_irq
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the number of QM async event queue interrupts.
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/aeq_irq
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the number of QM async event queue interrupts.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/abnormal_irq
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the number of interrupts for QM abnormal event.
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/abnormal_irq
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the number of interrupts for QM abnormal event.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/create_qp_err
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the number of queue allocation errors.
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/create_qp_err
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the number of queue allocation errors.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/mb_err
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the number of failed QM mailbox commands.
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/mb_err
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the number of failed QM mailbox commands.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/qm/status
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the status of the QM.
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/status
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the status of the QM.
 		Four states: initiated, started, stopped and closed.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of sent requests.
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/qm/diff_regs
+Date:		Mar 2022
+Contact:	linux-crypto@vger.kernel.org
+Description:	QM debug registers(regs) read hardware register value. This
+		node is used to show the change of the qm register values. This
+		node can be help users to check the change of register values.
+
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/diff_regs
+Date:		Mar 2022
+Contact:	linux-crypto@vger.kernel.org
+Description:	SEC debug registers(regs) read hardware register value. This
+		node is used to show the change of the register values. This
+		node can be help users to check the change of register values.
+
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of sent requests.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/recv_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of received requests.
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/recv_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of received requests.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_busy_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of requests sent with returning busy.
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_busy_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of requests sent with returning busy.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/err_bd_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of BD type error requests
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/err_bd_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of BD type error requests
 		to be received.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/invalid_req_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of invalid requests being received.
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/invalid_req_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of invalid requests being received.
 		Available for both PF and VF, and take no other effect on SEC.
 
-What:           /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/done_flag_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of completed but marked error requests
+What:		/sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/done_flag_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of completed but marked error requests
 		to be received.
 		Available for both PF and VF, and take no other effect on SEC.
diff --git a/Documentation/ABI/testing/debugfs-hisi-zip b/Documentation/ABI/testing/debugfs-hisi-zip
index 3034a2bf99ca..fd3f314cf8d1 100644
--- a/Documentation/ABI/testing/debugfs-hisi-zip
+++ b/Documentation/ABI/testing/debugfs-hisi-zip
@@ -1,114 +1,138 @@
-What:           /sys/kernel/debug/hisi_zip/<bdf>/comp_core[01]/regs
-Date:           Nov 2018
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump of compression cores related debug registers.
+What:		/sys/kernel/debug/hisi_zip/<bdf>/comp_core[01]/regs
+Date:		Nov 2018
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump of compression cores related debug registers.
 		Only available for PF.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/decomp_core[0-5]/regs
-Date:           Nov 2018
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump of decompression cores related debug registers.
+What:		/sys/kernel/debug/hisi_zip/<bdf>/decomp_core[0-5]/regs
+Date:		Nov 2018
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump of decompression cores related debug registers.
 		Only available for PF.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/clear_enable
-Date:           Nov 2018
-Contact:        linux-crypto@vger.kernel.org
-Description:    Compression/decompression core debug registers read clear
+What:		/sys/kernel/debug/hisi_zip/<bdf>/clear_enable
+Date:		Nov 2018
+Contact:	linux-crypto@vger.kernel.org
+Description:	Compression/decompression core debug registers read clear
 		control. 1 means enable register read clear, otherwise 0.
 		Writing to this file has no functional effect, only enable or
 		disable counters clear after reading of these registers.
 		Only available for PF.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/current_qm
-Date:           Nov 2018
-Contact:        linux-crypto@vger.kernel.org
-Description:    One ZIP controller has one PF and multiple VFs, each function
+What:		/sys/kernel/debug/hisi_zip/<bdf>/current_qm
+Date:		Nov 2018
+Contact:	linux-crypto@vger.kernel.org
+Description:	One ZIP controller has one PF and multiple VFs, each function
 		has a QM. Select the QM which below qm refers to.
 		Only available for PF.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/regs
-Date:           Nov 2018
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump of QM related debug registers.
+What:		/sys/kernel/debug/hisi_zip/<bdf>/alg_qos
+Date:		Jun 2021
+Contact:	linux-crypto@vger.kernel.org
+Description:	The <bdf> is related the function for PF and VF.
+		ZIP driver supports to configure each function's QoS, the driver
+		supports to write <bdf> value to alg_qos in the host. Such as
+		"echo <bdf> value > alg_qos". The qos value is 1~1000, means
+		1/1000~1000/1000 of total QoS. The driver reading alg_qos to
+		get related QoS in the host and VM, Such as "cat alg_qos".
+
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/regs
+Date:		Nov 2018
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump of QM related debug registers.
 		Available for PF and VF in host. VF in guest currently only
 		has one debug register.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/current_q
-Date:           Nov 2018
-Contact:        linux-crypto@vger.kernel.org
-Description:    One QM may contain multiple queues. Select specific queue to
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/current_q
+Date:		Nov 2018
+Contact:	linux-crypto@vger.kernel.org
+Description:	One QM may contain multiple queues. Select specific queue to
 		show its debug registers in above regs.
 		Only available for PF.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/clear_enable
-Date:           Nov 2018
-Contact:        linux-crypto@vger.kernel.org
-Description:    QM debug registers(regs) read clear control. 1 means enable
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/clear_enable
+Date:		Nov 2018
+Contact:	linux-crypto@vger.kernel.org
+Description:	QM debug registers(regs) read clear control. 1 means enable
 		register read clear, otherwise 0.
 		Writing to this file has no functional effect, only enable or
 		disable counters clear after reading of these registers.
 		Only available for PF.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/err_irq
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the number of invalid interrupts for
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/err_irq
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the number of invalid interrupts for
 		QM task completion.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/aeq_irq
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the number of QM async event queue interrupts.
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/aeq_irq
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the number of QM async event queue interrupts.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/abnormal_irq
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the number of interrupts for QM abnormal event.
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/abnormal_irq
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the number of interrupts for QM abnormal event.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/create_qp_err
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the number of queue allocation errors.
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/create_qp_err
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the number of queue allocation errors.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/mb_err
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the number of failed QM mailbox commands.
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/mb_err
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the number of failed QM mailbox commands.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/qm/status
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the status of the QM.
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/status
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the status of the QM.
 		Four states: initiated, started, stopped and closed.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of sent requests.
+What:		/sys/kernel/debug/hisi_zip/<bdf>/qm/diff_regs
+Date:		Mar 2022
+Contact:	linux-crypto@vger.kernel.org
+Description:	QM debug registers(regs) read hardware register value. This
+		node is used to show the change of the qm registers value. This
+		node can be help users to check the change of register values.
+
+What:		/sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/diff_regs
+Date:		Mar 2022
+Contact:	linux-crypto@vger.kernel.org
+Description:	ZIP debug registers(regs) read hardware register value. This
+		node is used to show the change of the registers value. this
+		node can be help users to check the change of register values.
+
+What:		/sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of sent requests.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/recv_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of received requests.
+What:		/sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/recv_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of received requests.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_busy_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of requests received
+What:		/sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_busy_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of requests received
 		with returning busy.
 		Available for both PF and VF, and take no other effect on ZIP.
 
-What:           /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/err_bd_cnt
-Date:           Apr 2020
-Contact:        linux-crypto@vger.kernel.org
-Description:    Dump the total number of BD type error requests
+What:		/sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/err_bd_cnt
+Date:		Apr 2020
+Contact:	linux-crypto@vger.kernel.org
+Description:	Dump the total number of BD type error requests
 		to be received.
 		Available for both PF and VF, and take no other effect on ZIP.
diff --git a/Documentation/ABI/testing/debugfs-scmi b/Documentation/ABI/testing/debugfs-scmi
new file mode 100644
index 000000000000..ee7179ab2edf
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-scmi
@@ -0,0 +1,70 @@
+What:		/sys/kernel/debug/scmi/<n>/instance_name
+Date:		March 2023
+KernelVersion:	6.3
+Contact:	cristian.marussi@arm.com
+Description:	The name of the underlying SCMI instance <n> described by
+		all the debugfs accessors rooted at /sys/kernel/debug/scmi/<n>,
+		expressed as the full name of the top DT SCMI node under which
+		this SCMI instance is rooted.
+Users:		Debugging, any userspace test suite
+
+What:		/sys/kernel/debug/scmi/<n>/atomic_threshold_us
+Date:		March 2023
+KernelVersion:	6.3
+Contact:	cristian.marussi@arm.com
+Description:	An optional time value, expressed in microseconds, representing,
+		on this SCMI instance <n>, the threshold above which any SCMI
+		command, advertised to have an higher-than-threshold execution
+		latency, should not be considered for atomic mode of operation,
+		even if requested.
+Users:		Debugging, any userspace test suite
+
+What:		/sys/kernel/debug/scmi/<n>/transport/type
+Date:		March 2023
+KernelVersion:	6.3
+Contact:	cristian.marussi@arm.com
+Description:	A string representing the type of transport configured for this
+		SCMI instance <n>.
+Users:		Debugging, any userspace test suite
+
+What:		/sys/kernel/debug/scmi/<n>/transport/is_atomic
+Date:		March 2023
+KernelVersion:	6.3
+Contact:	cristian.marussi@arm.com
+Description:	A boolean stating if the transport configured on the underlying
+		SCMI instance <n> is capable of atomic mode of operation.
+Users:		Debugging, any userspace test suite
+
+What:		/sys/kernel/debug/scmi/<n>/transport/max_rx_timeout_ms
+Date:		March 2023
+KernelVersion:	6.3
+Contact:	cristian.marussi@arm.com
+Description:	Timeout in milliseconds allowed for SCMI synchronous replies
+		for the currently configured SCMI transport for instance <n>.
+Users:		Debugging, any userspace test suite
+
+What:		/sys/kernel/debug/scmi/<n>/transport/max_msg_size
+Date:		March 2023
+KernelVersion:	6.3
+Contact:	cristian.marussi@arm.com
+Description:	Max message size of allowed SCMI messages for the currently
+		configured SCMI transport for instance <n>.
+Users:		Debugging, any userspace test suite
+
+What:		/sys/kernel/debug/scmi/<n>/transport/tx_max_msg
+Date:		March 2023
+KernelVersion:	6.3
+Contact:	cristian.marussi@arm.com
+Description:	Max number of concurrently allowed in-flight SCMI messages for
+		the currently configured SCMI transport for instance <n> on the
+		TX channels.
+Users:		Debugging, any userspace test suite
+
+What:		/sys/kernel/debug/scmi/<n>/transport/rx_max_msg
+Date:		March 2023
+KernelVersion:	6.3
+Contact:	cristian.marussi@arm.com
+Description:	Max number of concurrently allowed in-flight SCMI messages for
+		the currently configured SCMI transport for instance <n> on the
+		RX channels.
+Users:		Debugging, any userspace test suite
diff --git a/Documentation/ABI/testing/debugfs-scmi-raw b/Documentation/ABI/testing/debugfs-scmi-raw
new file mode 100644
index 000000000000..97678cc9535c
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-scmi-raw
@@ -0,0 +1,117 @@
+What:		/sys/kernel/debug/scmi/<n>/raw/message
+Date:		March 2023
+KernelVersion:	6.3
+Contact:	cristian.marussi@arm.com
+Description:	SCMI Raw synchronous message injection/snooping facility; write
+		a complete SCMI synchronous command message (header included)
+		in little-endian binary format to have it sent to the configured
+		backend SCMI server for instance <n>.
+		Any subsequently received response can be read from this same
+		entry if it arrived within the configured timeout.
+		Each write to the entry causes one command request to be built
+		and sent while the replies are read back one message at time
+		(receiving an EOF at each message boundary).
+Users:		Debugging, any userspace test suite
+
+What:		/sys/kernel/debug/scmi/<n>/raw/message_async
+Date:		March 2023
+KernelVersion:	6.3
+Contact:	cristian.marussi@arm.com
+Description:	SCMI Raw asynchronous message injection/snooping facility; write
+		a complete SCMI asynchronous command message (header included)
+		in little-endian binary format to have it sent to the configured
+		backend SCMI server for instance <n>.
+		Any subsequently received response can be read from this same
+		entry if it arrived within the configured timeout.
+		Any additional delayed response received afterwards can be read
+		from this same entry too if it arrived within the configured
+		timeout.
+		Each write to the entry causes one command request to be built
+		and sent while the replies are read back one message at time
+		(receiving an EOF at each message boundary).
+Users:		Debugging, any userspace test suite
+
+What:		/sys/kernel/debug/scmi/<n>/raw/errors
+Date:		March 2023
+KernelVersion:	6.3
+Contact:	cristian.marussi@arm.com
+Description:	SCMI Raw message errors facility; any kind of timed-out or
+		generally unexpectedly received SCMI message, for instance <n>,
+		can be read from this entry.
+		Each read gives back one message at time (receiving an EOF at
+		each message boundary).
+Users:		Debugging, any userspace test suite
+
+What:		/sys/kernel/debug/scmi/<n>/raw/notification
+Date:		March 2023
+KernelVersion:	6.3
+Contact:	cristian.marussi@arm.com
+Description:	SCMI Raw notification snooping facility; any notification
+		emitted by the backend SCMI server, for instance <n>, can be
+		read from this entry.
+		Each read gives back one message at time (receiving an EOF at
+		each message boundary).
+Users:		Debugging, any userspace test suite
+
+What:		/sys/kernel/debug/scmi/<n>/raw/reset
+Date:		March 2023
+KernelVersion:	6.3
+Contact:	cristian.marussi@arm.com
+Description:	SCMI Raw stack reset facility; writing a value to this entry
+		causes the internal queues of any kind of received message,
+		still pending to be read out for instance <n>, to be immediately
+		flushed.
+		Can be used to reset and clean the SCMI Raw stack between to
+		different test-run.
+Users:		Debugging, any userspace test suite
+
+What:		/sys/kernel/debug/scmi/<n>/raw/channels/<m>/message
+Date:		March 2023
+KernelVersion:	6.3
+Contact:	cristian.marussi@arm.com
+Description:	SCMI Raw synchronous message injection/snooping facility; write
+		a complete SCMI synchronous command message (header included)
+		in little-endian binary format to have it sent to the configured
+		backend SCMI server for instance <n> through the <m> transport
+		channel.
+		Any subsequently received response can be read from this same
+		entry if it arrived on channel <m> within the configured
+		timeout.
+		Each write to the entry causes one command request to be built
+		and sent while the replies are read back one message at time
+		(receiving an EOF at each message boundary).
+		Channel identifier <m> matches the SCMI protocol number which
+		has been associated with this transport channel in the DT
+		description, with base protocol number 0x10 being the default
+		channel for this instance.
+		Note that these per-channel entries rooted at <..>/channels
+		exist only if the transport is configured to have more than
+		one default channel.
+Users:		Debugging, any userspace test suite
+
+What:		/sys/kernel/debug/scmi/<n>/raw/channels/<m>/message_async
+Date:		March 2023
+KernelVersion:	6.3
+Contact:	cristian.marussi@arm.com
+Description:	SCMI Raw asynchronous message injection/snooping facility; write
+		a complete SCMI asynchronous command message (header included)
+		in little-endian binary format to have it sent to the configured
+		backend SCMI server for instance <n> through the <m> transport
+		channel.
+		Any subsequently received response can be read from this same
+		entry if it arrived on channel <m> within the configured
+		timeout.
+		Any additional delayed response received afterwards can be read
+		from this same entry too if it arrived within the configured
+		timeout.
+		Each write to the entry causes one command request to be built
+		and sent while the replies are read back one message at time
+		(receiving an EOF at each message boundary).
+		Channel identifier <m> matches the SCMI protocol number which
+		has been associated with this transport channel in the DT
+		description, with base protocol number 0x10 being the default
+		channel for this instance.
+		Note that these per-channel entries rooted at <..>/channels
+		exist only if the transport is configured to have more than
+		one default channel.
+Users:		Debugging, any userspace test suite
diff --git a/Documentation/ABI/testing/evm b/Documentation/ABI/testing/evm
index 553fd8a33e56..44750a933db4 100644
--- a/Documentation/ABI/testing/evm
+++ b/Documentation/ABI/testing/evm
@@ -1,4 +1,5 @@
-What:		security/evm
+What:		/sys/kernel/security/evm
+What:		/sys/kernel/security/*/evm
 Date:		March 2011
 Contact:	Mimi Zohar <zohar@us.ibm.com>
 Description:
@@ -93,7 +94,7 @@ Description:
 		core/ima-setup) have support for loading keys at boot
 		time.
 
-What:		security/integrity/evm/evm_xattrs
+What:		/sys/kernel/security/*/evm/evm_xattrs
 Date:		April 2018
 Contact:	Matthew Garrett <mjg59@google.com>
 Description:
diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy
index 5c2798534950..49db0ff288e5 100644
--- a/Documentation/ABI/testing/ima_policy
+++ b/Documentation/ABI/testing/ima_policy
@@ -1,4 +1,4 @@
-What:		security/ima/policy
+What:		/sys/kernel/security/*/ima/policy
 Date:		May 2008
 Contact:	Mimi Zohar <zohar@us.ibm.com>
 Description:
@@ -22,31 +22,47 @@ Description:
 		  action: measure | dont_measure | appraise | dont_appraise |
 			  audit | hash | dont_hash
 		  condition:= base | lsm  [option]
-			base:	[[func=] [mask=] [fsmagic=] [fsuuid=] [uid=]
-				[euid=] [fowner=] [fsname=]]
+			base:	[[func=] [mask=] [fsmagic=] [fsuuid=] [fsname=]
+				[uid=] [euid=] [gid=] [egid=]
+				[fowner=] [fgroup=]]
 			lsm:	[[subj_user=] [subj_role=] [subj_type=]
 				 [obj_user=] [obj_role=] [obj_type=]]
-			option:	[[appraise_type=]] [template=] [permit_directio]
-				[appraise_flag=] [appraise_algos=] [keyrings=]
+			option:	[digest_type=] [template=] [permit_directio]
+				[appraise_type=] [appraise_flag=]
+				[appraise_algos=] [keyrings=]
 		  base:
 			func:= [BPRM_CHECK][MMAP_CHECK][CREDS_CHECK][FILE_CHECK][MODULE_CHECK]
 				[FIRMWARE_CHECK]
 				[KEXEC_KERNEL_CHECK] [KEXEC_INITRAMFS_CHECK]
 				[KEXEC_CMDLINE] [KEY_CHECK] [CRITICAL_DATA]
-				[SETXATTR_CHECK]
+				[SETXATTR_CHECK][MMAP_CHECK_REQPROT]
 			mask:= [[^]MAY_READ] [[^]MAY_WRITE] [[^]MAY_APPEND]
 			       [[^]MAY_EXEC]
 			fsmagic:= hex value
 			fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6)
 			uid:= decimal value
 			euid:= decimal value
+			gid:= decimal value
+			egid:= decimal value
 			fowner:= decimal value
+			fgroup:= decimal value
 		  lsm:  are LSM specific
 		  option:
-			appraise_type:= [imasig] [imasig|modsig]
+			appraise_type:= [imasig] | [imasig|modsig] | [sigv3]
+			    where 'imasig' is the original or the signature
+				format v2.
+			    where 'modsig' is an appended signature,
+			    where 'sigv3' is the signature format v3. (Currently
+				limited to fsverity digest based signatures
+				stored in security.ima xattr. Requires
+				specifying "digest_type=verity" first.)
+
 			appraise_flag:= [check_blacklist]
 			Currently, blacklist check is only for files signed with appended
 			signature.
+			digest_type:= verity
+			    Require fs-verity's file digest instead of the
+			    regular IMA file hash.
 			keyrings:= list of keyrings
 			(eg, .builtin_trusted_keys|.ima). Only valid
 			when action is "measure" and func is KEY_CHECK.
@@ -145,3 +161,30 @@ Description:
 		security.ima xattr of a file:
 
 			appraise func=SETXATTR_CHECK appraise_algos=sha256,sha384,sha512
+
+		Example of a 'measure' rule requiring fs-verity's digests
+		with indication of type of digest in the measurement list.
+
+			measure func=FILE_CHECK digest_type=verity \
+				template=ima-ngv2
+
+		Example of 'measure' and 'appraise' rules requiring fs-verity
+		signatures (format version 3) stored in security.ima xattr.
+
+		The 'measure' rule specifies the 'ima-sigv3' template option,
+		which includes the indication of type of digest and the file
+		signature in the measurement list.
+
+			measure func=BPRM_CHECK digest_type=verity \
+				template=ima-sigv3
+
+
+		The 'appraise' rule specifies the type and signature format
+		version (sigv3) required.
+
+			appraise func=BPRM_CHECK digest_type=verity \
+				appraise_type=sigv3
+
+		All of these policy rules could, for example, be constrained
+		either based on a filesystem's UUID (fsuuid) or based on LSM
+		labels.
diff --git a/Documentation/ABI/testing/procfs-smaps_rollup b/Documentation/ABI/testing/procfs-smaps_rollup
index a4e31c465194..b446a7154a1b 100644
--- a/Documentation/ABI/testing/procfs-smaps_rollup
+++ b/Documentation/ABI/testing/procfs-smaps_rollup
@@ -22,6 +22,7 @@ Description:
 			MMUPageSize:           4 kB
 			Rss:		     884 kB
 			Pss:		     385 kB
+			Pss_Dirty:	      68 kB
 			Pss_Anon:	     301 kB
 			Pss_File:	      80 kB
 			Pss_Shmem:	       4 kB
diff --git a/Documentation/ABI/testing/pstore b/Documentation/ABI/testing/pstore
index 5b02540781a2..d3cff4a7ee10 100644
--- a/Documentation/ABI/testing/pstore
+++ b/Documentation/ABI/testing/pstore
@@ -1,4 +1,5 @@
-What:		/sys/fs/pstore/... (or /dev/pstore/...)
+What:		/sys/fs/pstore/...
+What:		/dev/pstore/...
 Date:		March 2011
 KernelVersion: 2.6.39
 Contact:	tony.luck@intel.com
diff --git a/Documentation/ABI/testing/securityfs-secrets-coco b/Documentation/ABI/testing/securityfs-secrets-coco
new file mode 100644
index 000000000000..f2b6909155f9
--- /dev/null
+++ b/Documentation/ABI/testing/securityfs-secrets-coco
@@ -0,0 +1,51 @@
+What:		security/secrets/coco
+Date:		February 2022
+Contact:	Dov Murik <dovmurik@linux.ibm.com>
+Description:
+		Exposes confidential computing (coco) EFI secrets to
+		userspace via securityfs.
+
+		EFI can declare memory area used by confidential computing
+		platforms (such as AMD SEV and SEV-ES) for secret injection by
+		the Guest Owner during VM's launch.  The secrets are encrypted
+		by the Guest Owner and decrypted inside the trusted enclave,
+		and therefore are not readable by the untrusted host.
+
+		The efi_secret module exposes the secrets to userspace.  Each
+		secret appears as a file under <securityfs>/secrets/coco,
+		where the filename is the GUID of the entry in the secrets
+		table.  This module is loaded automatically by the EFI driver
+		if the EFI secret area is populated.
+
+		Two operations are supported for the files: read and unlink.
+		Reading the file returns the content of secret entry.
+		Unlinking the file overwrites the secret data with zeroes and
+		removes the entry from the filesystem.  A secret cannot be read
+		after it has been unlinked.
+
+		For example, listing the available secrets::
+
+		  # modprobe efi_secret
+		  # ls -l /sys/kernel/security/secrets/coco
+		  -r--r----- 1 root root 0 Jun 28 11:54 736870e5-84f0-4973-92ec-06879ce3da0b
+		  -r--r----- 1 root root 0 Jun 28 11:54 83c83f7f-1356-4975-8b7e-d3a0b54312c6
+		  -r--r----- 1 root root 0 Jun 28 11:54 9553f55d-3da2-43ee-ab5d-ff17f78864d2
+		  -r--r----- 1 root root 0 Jun 28 11:54 e6f5a162-d67f-4750-a67c-5d065f2a9910
+
+		Reading the secret data by reading a file::
+
+		  # cat /sys/kernel/security/secrets/coco/e6f5a162-d67f-4750-a67c-5d065f2a9910
+		  the-content-of-the-secret-data
+
+		Wiping a secret by unlinking a file::
+
+		  # rm /sys/kernel/security/secrets/coco/e6f5a162-d67f-4750-a67c-5d065f2a9910
+		  # ls -l /sys/kernel/security/secrets/coco
+		  -r--r----- 1 root root 0 Jun 28 11:54 736870e5-84f0-4973-92ec-06879ce3da0b
+		  -r--r----- 1 root root 0 Jun 28 11:54 83c83f7f-1356-4975-8b7e-d3a0b54312c6
+		  -r--r----- 1 root root 0 Jun 28 11:54 9553f55d-3da2-43ee-ab5d-ff17f78864d2
+
+		Note: The binary format of the secrets table injected by the
+		Guest Owner is described in
+		drivers/virt/coco/efi_secret/efi_secret.c under "Structure of
+		the EFI secret area".
diff --git a/Documentation/ABI/testing/sysfs-amd-pmc b/Documentation/ABI/testing/sysfs-amd-pmc
new file mode 100644
index 000000000000..c421b72844f1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-amd-pmc
@@ -0,0 +1,13 @@
+What:		/sys/bus/platform/drivers/amd_pmc/*/smu_fw_version
+Date:		October 2022
+Contact:	Mario Limonciello <mario.limonciello@amd.com>
+Description:	Reading this file reports the version of the firmware loaded to
+		System Management Unit (SMU) contained in AMD CPUs and
+		APUs.
+
+What:		/sys/bus/platform/drivers/amd_pmc/*/smu_program
+Date:		October 2022
+Contact:	Mario Limonciello <mario.limonciello@amd.com>
+Description:	Reading this file reports the program corresponding to the SMU
+		firmware version.  The program field is used to disambiguate two
+		APU/CPU models that can share the same firmware binary.
diff --git a/Documentation/ABI/testing/sysfs-amd-pmf b/Documentation/ABI/testing/sysfs-amd-pmf
new file mode 100644
index 000000000000..7fc0e1c2b76b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-amd-pmf
@@ -0,0 +1,13 @@
+What:		/sys/devices/platform/*/cnqf_enable
+Date:		September 2022
+Contact:	Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
+Description:	Reading this file tells if the AMD Platform Management(PMF)
+		Cool n Quiet Framework(CnQF) feature is enabled or not.
+
+		This feature is not enabled by default and gets only turned on
+		if OEM BIOS passes a "flag" to PMF ACPI function (index 11 or 12)
+		or in case the user writes "on".
+
+		To turn off CnQF user can write "off" to the sysfs node.
+		Note: Systems that support auto mode will not have this sysfs file
+		available.
diff --git a/Documentation/ABI/testing/sysfs-ata b/Documentation/ABI/testing/sysfs-ata
index 9ab0ef1dd1c7..3daecac48964 100644
--- a/Documentation/ABI/testing/sysfs-ata
+++ b/Documentation/ABI/testing/sysfs-ata
@@ -1,4 +1,4 @@
-What:		/sys/class/ata_...
+What:		/sys/class/ata_*
 Description:
 		Provide a place in sysfs for storing the ATA topology of the
 		system. This allows retrieving various information about ATA
@@ -107,13 +107,14 @@ Description:
 				described in ATA8 7.16 and 7.17. Only valid if
 				the device is not a PM.
 
-		pio_mode:	(RO) Transfer modes supported by the device when
-				in PIO mode. Mostly used by PATA device.
+		pio_mode:	(RO) PIO transfer mode used by the device.
+				Mostly used by PATA devices.
 
-		xfer_mode:	(RO) Current transfer mode
+		xfer_mode:	(RO) Current transfer mode. Mostly used by
+				PATA devices.
 
-		dma_mode:	(RO) Transfer modes supported by the device when
-				in DMA mode. Mostly used by PATA device.
+		dma_mode:	(RO) DMA transfer mode used by the device.
+				Mostly used by PATA devices.
 
 		class:		(RO) Device class. Can be "ata" for disk,
 				"atapi" for packet device, "pmp" for PM, or
diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block
deleted file mode 100644
index a0ed87386639..000000000000
--- a/Documentation/ABI/testing/sysfs-block
+++ /dev/null
@@ -1,330 +0,0 @@
-What:		/sys/block/<disk>/stat
-Date:		February 2008
-Contact:	Jerome Marchand <jmarchan@redhat.com>
-Description:
-		The /sys/block/<disk>/stat files displays the I/O
-		statistics of disk <disk>. They contain 11 fields:
-
-		==  ==============================================
-		 1  reads completed successfully
-		 2  reads merged
-		 3  sectors read
-		 4  time spent reading (ms)
-		 5  writes completed
-		 6  writes merged
-		 7  sectors written
-		 8  time spent writing (ms)
-		 9  I/Os currently in progress
-		10  time spent doing I/Os (ms)
-		11  weighted time spent doing I/Os (ms)
-		12  discards completed
-		13  discards merged
-		14  sectors discarded
-		15  time spent discarding (ms)
-		16  flush requests completed
-		17  time spent flushing (ms)
-		==  ==============================================
-
-		For more details refer Documentation/admin-guide/iostats.rst
-
-
-What:		/sys/block/<disk>/diskseq
-Date:		February 2021
-Contact:	Matteo Croce <mcroce@microsoft.com>
-Description:
-		The /sys/block/<disk>/diskseq files reports the disk
-		sequence number, which is a monotonically increasing
-		number assigned to every drive.
-		Some devices, like the loop device, refresh such number
-		every time the backing file is changed.
-		The value type is 64 bit unsigned.
-
-
-What:		/sys/block/<disk>/<part>/stat
-Date:		February 2008
-Contact:	Jerome Marchand <jmarchan@redhat.com>
-Description:
-		The /sys/block/<disk>/<part>/stat files display the
-		I/O statistics of partition <part>. The format is the
-		same as the above-written /sys/block/<disk>/stat
-		format.
-
-
-What:		/sys/block/<disk>/integrity/format
-Date:		June 2008
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Metadata format for integrity capable block device.
-		E.g. T10-DIF-TYPE1-CRC.
-
-
-What:		/sys/block/<disk>/integrity/read_verify
-Date:		June 2008
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Indicates whether the block layer should verify the
-		integrity of read requests serviced by devices that
-		support sending integrity metadata.
-
-
-What:		/sys/block/<disk>/integrity/tag_size
-Date:		June 2008
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Number of bytes of integrity tag space available per
-		512 bytes of data.
-
-
-What:		/sys/block/<disk>/integrity/device_is_integrity_capable
-Date:		July 2014
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Indicates whether a storage device is capable of storing
-		integrity metadata. Set if the device is T10 PI-capable.
-
-What:		/sys/block/<disk>/integrity/protection_interval_bytes
-Date:		July 2015
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Describes the number of data bytes which are protected
-		by one integrity tuple. Typically the device's logical
-		block size.
-
-What:		/sys/block/<disk>/integrity/write_generate
-Date:		June 2008
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Indicates whether the block layer should automatically
-		generate checksums for write requests bound for
-		devices that support receiving integrity metadata.
-
-What:		/sys/block/<disk>/alignment_offset
-Date:		April 2009
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Storage devices may report a physical block size that is
-		bigger than the logical block size (for instance a drive
-		with 4KB physical sectors exposing 512-byte logical
-		blocks to the operating system).  This parameter
-		indicates how many bytes the beginning of the device is
-		offset from the disk's natural alignment.
-
-What:		/sys/block/<disk>/<partition>/alignment_offset
-Date:		April 2009
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Storage devices may report a physical block size that is
-		bigger than the logical block size (for instance a drive
-		with 4KB physical sectors exposing 512-byte logical
-		blocks to the operating system).  This parameter
-		indicates how many bytes the beginning of the partition
-		is offset from the disk's natural alignment.
-
-What:		/sys/block/<disk>/queue/logical_block_size
-Date:		May 2009
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		This is the smallest unit the storage device can
-		address.  It is typically 512 bytes.
-
-What:		/sys/block/<disk>/queue/physical_block_size
-Date:		May 2009
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		This is the smallest unit a physical storage device can
-		write atomically.  It is usually the same as the logical
-		block size but may be bigger.  One example is SATA
-		drives with 4KB sectors that expose a 512-byte logical
-		block size to the operating system.  For stacked block
-		devices the physical_block_size variable contains the
-		maximum physical_block_size of the component devices.
-
-What:		/sys/block/<disk>/queue/minimum_io_size
-Date:		April 2009
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Storage devices may report a granularity or preferred
-		minimum I/O size which is the smallest request the
-		device can perform without incurring a performance
-		penalty.  For disk drives this is often the physical
-		block size.  For RAID arrays it is often the stripe
-		chunk size.  A properly aligned multiple of
-		minimum_io_size is the preferred request size for
-		workloads where a high number of I/O operations is
-		desired.
-
-What:		/sys/block/<disk>/queue/optimal_io_size
-Date:		April 2009
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Storage devices may report an optimal I/O size, which is
-		the device's preferred unit for sustained I/O.  This is
-		rarely reported for disk drives.  For RAID arrays it is
-		usually the stripe width or the internal track size.  A
-		properly aligned multiple of optimal_io_size is the
-		preferred request size for workloads where sustained
-		throughput is desired.  If no optimal I/O size is
-		reported this file contains 0.
-
-What:		/sys/block/<disk>/queue/nomerges
-Date:		January 2010
-Contact:
-Description:
-		Standard I/O elevator operations include attempts to
-		merge contiguous I/Os. For known random I/O loads these
-		attempts will always fail and result in extra cycles
-		being spent in the kernel. This allows one to turn off
-		this behavior on one of two ways: When set to 1, complex
-		merge checks are disabled, but the simple one-shot merges
-		with the previous I/O request are enabled. When set to 2,
-		all merge tries are disabled. The default value is 0 -
-		which enables all types of merge tries.
-
-What:		/sys/block/<disk>/discard_alignment
-Date:		May 2011
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Devices that support discard functionality may
-		internally allocate space in units that are bigger than
-		the exported logical block size. The discard_alignment
-		parameter indicates how many bytes the beginning of the
-		device is offset from the internal allocation unit's
-		natural alignment.
-
-What:		/sys/block/<disk>/<partition>/discard_alignment
-Date:		May 2011
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Devices that support discard functionality may
-		internally allocate space in units that are bigger than
-		the exported logical block size. The discard_alignment
-		parameter indicates how many bytes the beginning of the
-		partition is offset from the internal allocation unit's
-		natural alignment.
-
-What:		/sys/block/<disk>/queue/discard_granularity
-Date:		May 2011
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Devices that support discard functionality may
-		internally allocate space using units that are bigger
-		than the logical block size. The discard_granularity
-		parameter indicates the size of the internal allocation
-		unit in bytes if reported by the device. Otherwise the
-		discard_granularity will be set to match the device's
-		physical block size. A discard_granularity of 0 means
-		that the device does not support discard functionality.
-
-What:		/sys/block/<disk>/queue/discard_max_bytes
-Date:		May 2011
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Devices that support discard functionality may have
-		internal limits on the number of bytes that can be
-		trimmed or unmapped in a single operation. Some storage
-		protocols also have inherent limits on the number of
-		blocks that can be described in a single command. The
-		discard_max_bytes parameter is set by the device driver
-		to the maximum number of bytes that can be discarded in
-		a single operation. Discard requests issued to the
-		device must not exceed this limit. A discard_max_bytes
-		value of 0 means that the device does not support
-		discard functionality.
-
-What:		/sys/block/<disk>/queue/discard_zeroes_data
-Date:		May 2011
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Will always return 0.  Don't rely on any specific behavior
-		for discards, and don't read this file.
-
-What:		/sys/block/<disk>/queue/write_same_max_bytes
-Date:		January 2012
-Contact:	Martin K. Petersen <martin.petersen@oracle.com>
-Description:
-		Some devices support a write same operation in which a
-		single data block can be written to a range of several
-		contiguous blocks on storage. This can be used to wipe
-		areas on disk or to initialize drives in a RAID
-		configuration. write_same_max_bytes indicates how many
-		bytes can be written in a single write same command. If
-		write_same_max_bytes is 0, write same is not supported
-		by the device.
-
-What:		/sys/block/<disk>/queue/write_zeroes_max_bytes
-Date:		November 2016
-Contact:	Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
-Description:
-		Devices that support write zeroes operation in which a
-		single request can be issued to zero out the range of
-		contiguous blocks on storage without having any payload
-		in the request. This can be used to optimize writing zeroes
-		to the devices. write_zeroes_max_bytes indicates how many
-		bytes can be written in a single write zeroes command. If
-		write_zeroes_max_bytes is 0, write zeroes is not supported
-		by the device.
-
-What:		/sys/block/<disk>/queue/zoned
-Date:		September 2016
-Contact:	Damien Le Moal <damien.lemoal@wdc.com>
-Description:
-		zoned indicates if the device is a zoned block device
-		and the zone model of the device if it is indeed zoned.
-		The possible values indicated by zoned are "none" for
-		regular block devices and "host-aware" or "host-managed"
-		for zoned block devices. The characteristics of
-		host-aware and host-managed zoned block devices are
-		described in the ZBC (Zoned Block Commands) and ZAC
-		(Zoned Device ATA Command Set) standards. These standards
-		also define the "drive-managed" zone model. However,
-		since drive-managed zoned block devices do not support
-		zone commands, they will be treated as regular block
-		devices and zoned will report "none".
-
-What:		/sys/block/<disk>/queue/nr_zones
-Date:		November 2018
-Contact:	Damien Le Moal <damien.lemoal@wdc.com>
-Description:
-		nr_zones indicates the total number of zones of a zoned block
-		device ("host-aware" or "host-managed" zone model). For regular
-		block devices, the value is always 0.
-
-What:		/sys/block/<disk>/queue/max_active_zones
-Date:		July 2020
-Contact:	Niklas Cassel <niklas.cassel@wdc.com>
-Description:
-		For zoned block devices (zoned attribute indicating
-		"host-managed" or "host-aware"), the sum of zones belonging to
-		any of the zone states: EXPLICIT OPEN, IMPLICIT OPEN or CLOSED,
-		is limited by this value. If this value is 0, there is no limit.
-
-What:		/sys/block/<disk>/queue/max_open_zones
-Date:		July 2020
-Contact:	Niklas Cassel <niklas.cassel@wdc.com>
-Description:
-		For zoned block devices (zoned attribute indicating
-		"host-managed" or "host-aware"), the sum of zones belonging to
-		any of the zone states: EXPLICIT OPEN or IMPLICIT OPEN,
-		is limited by this value. If this value is 0, there is no limit.
-
-What:		/sys/block/<disk>/queue/chunk_sectors
-Date:		September 2016
-Contact:	Hannes Reinecke <hare@suse.com>
-Description:
-		chunk_sectors has different meaning depending on the type
-		of the disk. For a RAID device (dm-raid), chunk_sectors
-		indicates the size in 512B sectors of the RAID volume
-		stripe segment. For a zoned block device, either
-		host-aware or host-managed, chunk_sectors indicates the
-		size in 512B sectors of the zones of the device, with
-		the eventual exception of the last zone of the device
-		which may be smaller.
-
-What:		/sys/block/<disk>/queue/io_timeout
-Date:		November 2018
-Contact:	Weiping Zhang <zhangweiping@didiglobal.com>
-Description:
-		io_timeout is the request timeout in milliseconds. If a request
-		does not complete in this time then the block driver timeout
-		handler is invoked. That timeout handler can decide to retry
-		the request, to fail it or to start a device recovery strategy.
diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram
index 14b2bf2e5105..628a00fb20a9 100644
--- a/Documentation/ABI/testing/sysfs-block-zram
+++ b/Documentation/ABI/testing/sysfs-block-zram
@@ -137,3 +137,17 @@ Description:
 		The writeback_limit file is read-write and specifies the maximum
 		amount of writeback ZRAM can do. The limit could be changed
 		in run time.
+
+What:		/sys/block/zram<id>/recomp_algorithm
+Date:		November 2022
+Contact:	Sergey Senozhatsky <senozhatsky@chromium.org>
+Description:
+		The recomp_algorithm file is read-write and allows to set
+		or show secondary compression algorithms.
+
+What:		/sys/block/zram<id>/recompress
+Date:		November 2022
+Contact:	Sergey Senozhatsky <senozhatsky@chromium.org>
+Description:
+		The recompress file is write-only and triggers re-compression
+		with secondary compression algorithms.
diff --git a/Documentation/ABI/testing/sysfs-bus-bcma b/Documentation/ABI/testing/sysfs-bus-bcma
index 721b4aea3020..e93d3ddca844 100644
--- a/Documentation/ABI/testing/sysfs-bus-bcma
+++ b/Documentation/ABI/testing/sysfs-bus-bcma
@@ -3,7 +3,7 @@ Date:		May 2011
 KernelVersion:	3.0
 Contact:	Rafał Miłecki <zajec5@gmail.com>
 Description:
-		Each BCMA core has it's manufacturer id. See
+		Each BCMA core has its manufacturer id. See
 		include/linux/bcma/bcma.h for possible values.
 
 What:		/sys/bus/bcma/devices/.../id
diff --git a/Documentation/ABI/testing/sysfs-bus-cdx b/Documentation/ABI/testing/sysfs-bus-cdx
new file mode 100644
index 000000000000..7af477f49998
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-cdx
@@ -0,0 +1,56 @@
+What:		/sys/bus/cdx/rescan
+Date:		March 2023
+Contact:	nipun.gupta@amd.com
+Description:
+		Writing y/1/on to this file will cause rescan of the bus
+		and devices on the CDX bus. Any new devices are scanned and
+		added to the list of Linux devices and any devices removed are
+		also deleted from Linux.
+
+		For example::
+
+		  # echo 1 > /sys/bus/cdx/rescan
+
+What:		/sys/bus/cdx/devices/.../vendor
+Date:		March 2023
+Contact:	nipun.gupta@amd.com
+Description:
+		Vendor ID for this CDX device, in hexadecimal. Vendor ID is
+		16 bit identifier which is specific to the device manufacturer.
+		Combination of Vendor ID and Device ID identifies a device.
+
+What:		/sys/bus/cdx/devices/.../device
+Date:		March 2023
+Contact:	nipun.gupta@amd.com
+Description:
+		Device ID for this CDX device, in hexadecimal. Device ID is
+		16 bit identifier to identify a device type within the range
+		of a device manufacturer.
+		Combination of Vendor ID and Device ID identifies a device.
+
+What:		/sys/bus/cdx/devices/.../reset
+Date:		March 2023
+Contact:	nipun.gupta@amd.com
+Description:
+		Writing y/1/on to this file resets the CDX device.
+		On resetting the device, the corresponding driver is notified
+		twice, once before the device is being reset, and again after
+		the reset has been complete.
+
+		For example::
+
+		  # echo 1 > /sys/bus/cdx/.../reset
+
+What:		/sys/bus/cdx/devices/.../remove
+Date:		March 2023
+Contact:	tarak.reddy@amd.com
+Description:
+		Writing y/1/on to this file removes the corresponding
+		device from the CDX bus. If the device is to be reconfigured
+		reconfigured in the Hardware, the device can be removed, so
+		that the device driver does not access the device while it is
+		being reconfigured.
+
+		For example::
+
+		  # echo 1 > /sys/bus/cdx/devices/.../remove
diff --git a/Documentation/ABI/testing/sysfs-bus-coreboot b/Documentation/ABI/testing/sysfs-bus-coreboot
new file mode 100644
index 000000000000..9c5accecc470
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-coreboot
@@ -0,0 +1,45 @@
+What:		/sys/bus/coreboot
+Date:		August 2022
+Contact:	Jack Rosenthal <jrosenth@chromium.org>
+Description:
+		The coreboot bus provides a variety of virtual devices used to
+		access data structures created by the Coreboot BIOS.
+
+What:		/sys/bus/coreboot/devices/cbmem-<id>
+Date:		August 2022
+Contact:	Jack Rosenthal <jrosenth@chromium.org>
+Description:
+		CBMEM is a downwards-growing memory region created by Coreboot,
+		and contains tagged data structures to be shared with payloads
+		in the boot process and the OS.  Each CBMEM entry is given a
+		directory in /sys/bus/coreboot/devices based on its id.
+		A list of ids known to Coreboot can be found in the coreboot
+		source tree at
+		``src/commonlib/bsd/include/commonlib/bsd/cbmem_id.h``.
+
+What:		/sys/bus/coreboot/devices/cbmem-<id>/address
+Date:		August 2022
+Contact:	Jack Rosenthal <jrosenth@chromium.org>
+Description:
+		This is the pyhsical memory address that the CBMEM entry's data
+		begins at, in hexadecimal (e.g., ``0x76ffe000``).
+
+What:		/sys/bus/coreboot/devices/cbmem-<id>/size
+Date:		August 2022
+Contact:	Jack Rosenthal <jrosenth@chromium.org>
+Description:
+		This is the size of the CBMEM entry's data, in hexadecimal
+		(e.g., ``0x1234``).
+
+What:		/sys/bus/coreboot/devices/cbmem-<id>/mem
+Date:		August 2022
+Contact:	Jack Rosenthal <jrosenth@chromium.org>
+Description:
+		A file exposing read/write access to the entry's data.  Note
+		that this file does not support mmap(), as coreboot
+		does not guarantee that the data will be page-aligned.
+
+		The mode of this file is 0600.  While there shouldn't be
+		anything security-sensitive contained in CBMEM, read access
+		requires root privileges given this is exposing a small subset
+		of physical memory.
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
index 651602a61eac..234c33fbdb55 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
@@ -236,7 +236,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/traceid
 Date:		November 2014
 KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: 	(RW) Holds the trace ID that will appear in the trace stream
+Description: 	(RO) Holds the trace ID that will appear in the trace stream
 		coming from this trace entity.
 
 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/trigger_event
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
index 8e53a32f8150..08b1964f27d3 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
@@ -516,3 +516,11 @@ Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description:	(Read) Returns the number of special conditional P1 right-hand keys
 		that the trace unit can use (0x194).  The value is taken
 		directly from the HW.
+
+What:		/sys/bus/coresight/devices/etm<N>/ts_source
+Date:		October 2022
+KernelVersion:	6.1
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org> or Suzuki K Poulose <suzuki.poulose@arm.com>
+Description:	(Read) When FEAT_TRF is implemented, value of TRFCR_ELx.TS used for
+		trace session. Otherwise -1 indicates an unknown time source. Check
+		trcidr0.tssize to see if a global timestamp is available.
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
new file mode 100644
index 000000000000..4a58e649550d
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
@@ -0,0 +1,13 @@
+What:		/sys/bus/coresight/devices/<tpdm-name>/integration_test
+Date:		January 2023
+KernelVersion	6.2
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(Write) Run integration test for tpdm. Integration test
+		will generate test data for tpdm. It can help to make
+		sure that the trace path is enabled and the link configurations
+		are fine.
+
+		Accepts only one of the 2 values -  1 or 2.
+		1 : Generate 64 bits data
+		2 : Generate 32 bits data
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
new file mode 100644
index 000000000000..f560918ae738
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
@@ -0,0 +1,31 @@
+What:		/sys/bus/coresight/devices/ultra_smb<N>/enable_sink
+Date:		January 2023
+KernelVersion:	6.3
+Contact:	Junhao He <hejunhao3@huawei.com>
+Description:	(RW) Add/remove a SMB device from a trace path. There can be
+		multiple sources for a single SMB device.
+
+What:		/sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
+Date:		January 2023
+KernelVersion:	6.3
+Contact:	Junhao He <hejunhao3@huawei.com>
+Description:	(RO) Shows the buffer size of each UltraSoc SMB device.
+
+What:		/sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
+Date:		January 2023
+KernelVersion:	6.3
+Contact:	Junhao He <hejunhao3@huawei.com>
+Description:	(RO) Shows the value of UltraSoc SMB status register.
+		BIT(0) is zero means buffer is empty.
+
+What:		/sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
+Date:		January 2023
+KernelVersion:	6.3
+Contact:	Junhao He <hejunhao3@huawei.com>
+Description:	(RO) Shows the value of UltraSoc SMB Read Pointer register.
+
+What:		/sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
+Date:		January 2023
+KernelVersion:	6.3
+Contact:	Junhao He <hejunhao3@huawei.com>
+Description:	(RO) Shows the value of UltraSoc SMB Write Pointer register.
diff --git a/Documentation/ABI/testing/sysfs-bus-counter b/Documentation/ABI/testing/sysfs-bus-counter
index 20fe5afd4f9e..1417c4272c6c 100644
--- a/Documentation/ABI/testing/sysfs-bus-counter
+++ b/Documentation/ABI/testing/sysfs-bus-counter
@@ -1,9 +1,45 @@
+What:		/sys/bus/counter/devices/counterX/cascade_counts_enable
+KernelVersion:	6.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Indicates the cascading of Counts on Counter X.
+
+		Valid attribute values are boolean.
+
+What:		/sys/bus/counter/devices/counterX/external_input_phase_clock_select
+KernelVersion:	6.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Selects the external clock pin for phase counting mode of
+		Counter X.
+
+		MTCLKA-MTCLKB:
+			MTCLKA and MTCLKB pins are selected for the external
+			phase clock.
+
+		MTCLKC-MTCLKD:
+			MTCLKC and MTCLKD pins are selected for the external
+			phase clock.
+
+What:		/sys/bus/counter/devices/counterX/external_input_phase_clock_select_available
+KernelVersion:  6.4
+Contact:        linux-iio@vger.kernel.org
+Description:
+                Discrete set of available values for the respective device
+                configuration are listed in this file.
+
 What:		/sys/bus/counter/devices/counterX/countY/count
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Count data of Count Y represented as a string.
 
+What:		/sys/bus/counter/devices/counterX/countY/capture
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Historical capture of the Count Y count data.
+
 What:		/sys/bus/counter/devices/counterX/countY/ceiling
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
@@ -203,6 +239,39 @@ Description:
 		both edges:
 			Any state transition.
 
+What:		/sys/bus/counter/devices/counterX/countY/num_overflows
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute indicates the number of overflows of count Y.
+
+What:		/sys/bus/counter/devices/counterX/cascade_counts_enable_component_id
+What:		/sys/bus/counter/devices/counterX/external_input_phase_clock_select_component_id
+What:		/sys/bus/counter/devices/counterX/countY/capture_component_id
+What:		/sys/bus/counter/devices/counterX/countY/ceiling_component_id
+What:		/sys/bus/counter/devices/counterX/countY/floor_component_id
+What:		/sys/bus/counter/devices/counterX/countY/count_mode_component_id
+What:		/sys/bus/counter/devices/counterX/countY/direction_component_id
+What:		/sys/bus/counter/devices/counterX/countY/enable_component_id
+What:		/sys/bus/counter/devices/counterX/countY/error_noise_component_id
+What:		/sys/bus/counter/devices/counterX/countY/prescaler_component_id
+What:		/sys/bus/counter/devices/counterX/countY/preset_component_id
+What:		/sys/bus/counter/devices/counterX/countY/preset_enable_component_id
+What:		/sys/bus/counter/devices/counterX/countY/signalZ_action_component_id
+What:		/sys/bus/counter/devices/counterX/countY/num_overflows_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/cable_fault_enable_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/filter_clock_prescaler_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/index_polarity_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/polarity_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode_component_id
+What:		/sys/bus/counter/devices/counterX/signalY/frequency_component_id
+KernelVersion:	5.16
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read-only attribute that indicates the component ID of the
+		respective extension or Synapse.
+
 What:		/sys/bus/counter/devices/counterX/countY/spike_filter_ns
 KernelVersion:	5.14
 Contact:	linux-iio@vger.kernel.org
@@ -212,6 +281,14 @@ Description:
 		shorter or equal to configured value are ignored. Value 0 means
 		filter is disabled.
 
+What:		/sys/bus/counter/devices/counterX/events_queue_size
+KernelVersion:	5.16
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Size of the Counter events queue in number of struct
+		counter_event data structures. The number of elements will be
+		rounded-up to a power of 2.
+
 What:		/sys/bus/counter/devices/counterX/name
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
@@ -274,6 +351,19 @@ Description:
 		Discrete set of available values for the respective Signal Y
 		configuration are listed in this file.
 
+What:		/sys/bus/counter/devices/counterX/signalY/polarity
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Active level of Signal Y. The following polarity values are
+		available:
+
+		positive:
+			Signal high state considered active level (rising edge).
+
+		negative:
+			Signal low state considered active level (falling edge).
+
 What:		/sys/bus/counter/devices/counterX/signalY/name
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
@@ -286,7 +376,14 @@ What:		/sys/bus/counter/devices/counterX/signalY/signal
 KernelVersion:	5.2
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Signal data of Signal Y represented as a string.
+		Signal level state of Signal Y. The following signal level
+		states are available:
+
+		low:
+			Low level state.
+
+		high:
+			High level state.
 
 What:		/sys/bus/counter/devices/counterX/signalY/synchronous_mode
 KernelVersion:	5.2
@@ -309,3 +406,9 @@ Description:
 			via index_polarity. The index function (as enabled via
 			preset_enable) is performed synchronously with the
 			quadrature clock on the active level of the index input.
+
+What:		/sys/bus/counter/devices/counterX/signalY/frequency
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read-only attribute that indicates the signal Y frequency, in Hz.
diff --git a/Documentation/ABI/testing/sysfs-bus-css b/Documentation/ABI/testing/sysfs-bus-css
index 12a733fe357f..d4d5cfb63b90 100644
--- a/Documentation/ABI/testing/sysfs-bus-css
+++ b/Documentation/ABI/testing/sysfs-bus-css
@@ -1,22 +1,19 @@
 What:		/sys/bus/css/devices/.../type
 Date:		March 2008
-Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
-		linux-s390@vger.kernel.org
+Contact:	linux-s390@vger.kernel.org
 Description:	Contains the subchannel type, as reported by the hardware.
 		This attribute is present for all subchannel types.
 
 What:		/sys/bus/css/devices/.../modalias
 Date:		March 2008
-Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
-		linux-s390@vger.kernel.org
+Contact:	linux-s390@vger.kernel.org
 Description:	Contains the module alias as reported with uevents.
 		It is of the format css:t<type> and present for all
 		subchannel types.
 
 What:		/sys/bus/css/drivers/io_subchannel/.../chpids
 Date:		December 2002
-Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
-		linux-s390@vger.kernel.org
+Contact:	linux-s390@vger.kernel.org
 Description:	Contains the ids of the channel paths used by this
 		subchannel, as reported by the channel subsystem
 		during subchannel recognition.
@@ -26,8 +23,7 @@ Users:		s390-tools, HAL
 
 What:		/sys/bus/css/drivers/io_subchannel/.../pimpampom
 Date:		December 2002
-Contact:	Cornelia Huck <cornelia.huck@de.ibm.com>
-		linux-s390@vger.kernel.org
+Contact:	linux-s390@vger.kernel.org
 Description:	Contains the PIM/PAM/POM values, as reported by the
 		channel subsystem when last queried by the common I/O
 		layer (this implies that this attribute is not necessarily
@@ -38,8 +34,7 @@ Users:		s390-tools, HAL
 
 What:		/sys/bus/css/devices/.../driver_override
 Date:		June 2019
-Contact:	Cornelia Huck <cohuck@redhat.com>
-		linux-s390@vger.kernel.org
+Contact:	linux-s390@vger.kernel.org
 Description:	This file allows the driver for a device to be specified. When
 		specified, only a driver with a name matching the value written
 		to driver_override will have an opportunity to bind to the
diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl
index 0b6a2e6e8fbb..48ac0d911801 100644
--- a/Documentation/ABI/testing/sysfs-bus-cxl
+++ b/Documentation/ABI/testing/sysfs-bus-cxl
@@ -1,3 +1,13 @@
+What:		/sys/bus/cxl/flush
+Date:		Januarry, 2022
+KernelVersion:	v5.18
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(WO) If userspace manually unbinds a port the kernel schedules
+		all descendant memdevs for unbind. Writing '1' to this attribute
+		flushes that work.
+
+
 What:		/sys/bus/cxl/devices/memX/firmware_version
 Date:		December, 2020
 KernelVersion:	v5.12
@@ -7,6 +17,7 @@ Description:
 		Memory Device Output Payload in the CXL-2.0
 		specification.
 
+
 What:		/sys/bus/cxl/devices/memX/ram/size
 Date:		December, 2020
 KernelVersion:	v5.12
@@ -16,6 +27,7 @@ Description:
 		identically named field in the Identify Memory Device Output
 		Payload in the CXL-2.0 specification.
 
+
 What:		/sys/bus/cxl/devices/memX/pmem/size
 Date:		December, 2020
 KernelVersion:	v5.12
@@ -25,105 +37,395 @@ Description:
 		identically named field in the Identify Memory Device Output
 		Payload in the CXL-2.0 specification.
 
+
+What:		/sys/bus/cxl/devices/memX/serial
+Date:		January, 2022
+KernelVersion:	v5.18
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) 64-bit serial number per the PCIe Device Serial Number
+		capability. Mandatory for CXL devices, see CXL 2.0 8.1.12.2
+		Memory Device PCIe Capabilities and Extended Capabilities.
+
+
+What:		/sys/bus/cxl/devices/memX/numa_node
+Date:		January, 2022
+KernelVersion:	v5.18
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) If NUMA is enabled and the platform has affinitized the
+		host PCI device for this memory device, emit the CPU node
+		affinity for this device.
+
+
 What:		/sys/bus/cxl/devices/*/devtype
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		CXL device objects export the devtype attribute which mirrors
-		the same value communicated in the DEVTYPE environment variable
-		for uevents for devices on the "cxl" bus.
+		(RO) CXL device objects export the devtype attribute which
+		mirrors the same value communicated in the DEVTYPE environment
+		variable for uevents for devices on the "cxl" bus.
+
+
+What:		/sys/bus/cxl/devices/*/modalias
+Date:		December, 2021
+KernelVersion:	v5.18
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) CXL device objects export the modalias attribute which
+		mirrors the same value communicated in the MODALIAS environment
+		variable for uevents for devices on the "cxl" bus.
+
 
 What:		/sys/bus/cxl/devices/portX/uport
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		CXL port objects are enumerated from either a platform firmware
-		device (ACPI0017 and ACPI0016) or PCIe switch upstream port with
-		CXL component registers. The 'uport' symlink connects the CXL
-		portX object to the device that published the CXL port
+		(RO) CXL port objects are enumerated from either a platform
+		firmware device (ACPI0017 and ACPI0016) or PCIe switch upstream
+		port with CXL component registers. The 'uport' symlink connects
+		the CXL portX object to the device that published the CXL port
 		capability.
 
+
+What:		/sys/bus/cxl/devices/{port,endpoint}X/parent_dport
+Date:		January, 2023
+KernelVersion:	v6.3
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) CXL port objects are instantiated for each upstream port in
+		a CXL/PCIe switch, and for each endpoint to map the
+		corresponding memory device into the CXL port hierarchy. When a
+		descendant CXL port (switch or endpoint) is enumerated it is
+		useful to know which 'dport' object in the parent CXL port
+		routes to this descendant. The 'parent_dport' symlink points to
+		the device representing the downstream port of a CXL switch that
+		routes to {port,endpoint}X.
+
+
 What:		/sys/bus/cxl/devices/portX/dportY
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		CXL port objects are enumerated from either a platform firmware
-		device (ACPI0017 and ACPI0016) or PCIe switch upstream port with
-		CXL component registers. The 'dportY' symlink identifies one or
-		more downstream ports that the upstream port may target in its
-		decode of CXL memory resources.  The 'Y' integer reflects the
-		hardware port unique-id used in the hardware decoder target
-		list.
+		(RO) CXL port objects are enumerated from either a platform
+		firmware device (ACPI0017 and ACPI0016) or PCIe switch upstream
+		port with CXL component registers. The 'dportY' symlink
+		identifies one or more downstream ports that the upstream port
+		may target in its decode of CXL memory resources.  The 'Y'
+		integer reflects the hardware port unique-id used in the
+		hardware decoder target list.
+
 
 What:		/sys/bus/cxl/devices/decoderX.Y
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		CXL decoder objects are enumerated from either a platform
+		(RO) CXL decoder objects are enumerated from either a platform
 		firmware description, or a CXL HDM decoder register set in a
 		PCIe device (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder
 		Capability Structure). The 'X' in decoderX.Y represents the
 		cxl_port container of this decoder, and 'Y' represents the
 		instance id of a given decoder resource.
 
+
 What:		/sys/bus/cxl/devices/decoderX.Y/{start,size}
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		The 'start' and 'size' attributes together convey the physical
-		address base and number of bytes mapped in the decoder's decode
-		window. For decoders of devtype "cxl_decoder_root" the address
-		range is fixed. For decoders of devtype "cxl_decoder_switch" the
-		address is bounded by the decode range of the cxl_port ancestor
-		of the decoder's cxl_port, and dynamically updates based on the
-		active memory regions in that address space.
+		(RO) The 'start' and 'size' attributes together convey the
+		physical address base and number of bytes mapped in the
+		decoder's decode window. For decoders of devtype
+		"cxl_decoder_root" the address range is fixed. For decoders of
+		devtype "cxl_decoder_switch" the address is bounded by the
+		decode range of the cxl_port ancestor of the decoder's cxl_port,
+		and dynamically updates based on the active memory regions in
+		that address space.
+
 
 What:		/sys/bus/cxl/devices/decoderX.Y/locked
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		CXL HDM decoders have the capability to lock the configuration
-		until the next device reset. For decoders of devtype
-		"cxl_decoder_root" there is no standard facility to unlock them.
-		For decoders of devtype "cxl_decoder_switch" a secondary bus
-		reset, of the PCIe bridge that provides the bus for this
-		decoders uport, unlocks / resets the decoder.
+		(RO) CXL HDM decoders have the capability to lock the
+		configuration until the next device reset. For decoders of
+		devtype "cxl_decoder_root" there is no standard facility to
+		unlock them.  For decoders of devtype "cxl_decoder_switch" a
+		secondary bus reset, of the PCIe bridge that provides the bus
+		for this decoders uport, unlocks / resets the decoder.
+
 
 What:		/sys/bus/cxl/devices/decoderX.Y/target_list
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		Display a comma separated list of the current decoder target
-		configuration. The list is ordered by the current configured
-		interleave order of the decoder's dport instances. Each entry in
-		the list is a dport id.
+		(RO) Display a comma separated list of the current decoder
+		target configuration. The list is ordered by the current
+		configured interleave order of the decoder's dport instances.
+		Each entry in the list is a dport id.
+
 
 What:		/sys/bus/cxl/devices/decoderX.Y/cap_{pmem,ram,type2,type3}
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		When a CXL decoder is of devtype "cxl_decoder_root", it
+		(RO) When a CXL decoder is of devtype "cxl_decoder_root", it
 		represents a fixed memory window identified by platform
 		firmware. A fixed window may only support a subset of memory
 		types. The 'cap_*' attributes indicate whether persistent
 		memory, volatile memory, accelerator memory, and / or expander
 		memory may be mapped behind this decoder's memory window.
 
+
 What:		/sys/bus/cxl/devices/decoderX.Y/target_type
 Date:		June, 2021
 KernelVersion:	v5.14
 Contact:	linux-cxl@vger.kernel.org
 Description:
-		When a CXL decoder is of devtype "cxl_decoder_switch", it can
-		optionally decode either accelerator memory (type-2) or expander
-		memory (type-3). The 'target_type' attribute indicates the
-		current setting which may dynamically change based on what
+		(RO) When a CXL decoder is of devtype "cxl_decoder_switch", it
+		can optionally decode either accelerator memory (type-2) or
+		expander memory (type-3). The 'target_type' attribute indicates
+		the current setting which may dynamically change based on what
 		memory regions are activated in this decode hierarchy.
+
+
+What:		/sys/bus/cxl/devices/endpointX/CDAT
+Date:		July, 2022
+KernelVersion:	v6.0
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) If this sysfs entry is not present no DOE mailbox was
+		found to support CDAT data.  If it is present and the length of
+		the data is 0 reading the CDAT data failed.  Otherwise the CDAT
+		data is reported.
+
+
+What:		/sys/bus/cxl/devices/decoderX.Y/mode
+Date:		May, 2022
+KernelVersion:	v6.0
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it
+		translates from a host physical address range, to a device local
+		address range. Device-local address ranges are further split
+		into a 'ram' (volatile memory) range and 'pmem' (persistent
+		memory) range. The 'mode' attribute emits one of 'ram', 'pmem',
+		'mixed', or 'none'. The 'mixed' indication is for error cases
+		when a decoder straddles the volatile/persistent partition
+		boundary, and 'none' indicates the decoder is not actively
+		decoding, or no DPA allocation policy has been set.
+
+		'mode' can be written, when the decoder is in the 'disabled'
+		state, with either 'ram' or 'pmem' to set the boundaries for the
+		next allocation.
+
+
+What:		/sys/bus/cxl/devices/decoderX.Y/dpa_resource
+Date:		May, 2022
+KernelVersion:	v6.0
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) When a CXL decoder is of devtype "cxl_decoder_endpoint",
+		and its 'dpa_size' attribute is non-zero, this attribute
+		indicates the device physical address (DPA) base address of the
+		allocation.
+
+
+What:		/sys/bus/cxl/devices/decoderX.Y/dpa_size
+Date:		May, 2022
+KernelVersion:	v6.0
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it
+		translates from a host physical address range, to a device local
+		address range. The range, base address plus length in bytes, of
+		DPA allocated to this decoder is conveyed in these 2 attributes.
+		Allocations can be mutated as long as the decoder is in the
+		disabled state. A write to 'dpa_size' releases the previous DPA
+		allocation and then attempts to allocate from the free capacity
+		in the device partition referred to by 'decoderX.Y/mode'.
+		Allocate and free requests can only be performed on the highest
+		instance number disabled decoder with non-zero size. I.e.
+		allocations are enforced to occur in increasing 'decoderX.Y/id'
+		order and frees are enforced to occur in decreasing
+		'decoderX.Y/id' order.
+
+
+What:		/sys/bus/cxl/devices/decoderX.Y/interleave_ways
+Date:		May, 2022
+KernelVersion:	v6.0
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) The number of targets across which this decoder's host
+		physical address (HPA) memory range is interleaved. The device
+		maps every Nth block of HPA (of size ==
+		'interleave_granularity') to consecutive DPA addresses. The
+		decoder's position in the interleave is determined by the
+		device's (endpoint or switch) switch ancestry. For root
+		decoders their interleave is specified by platform firmware and
+		they only specify a downstream target order for host bridges.
+
+
+What:		/sys/bus/cxl/devices/decoderX.Y/interleave_granularity
+Date:		May, 2022
+KernelVersion:	v6.0
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) The number of consecutive bytes of host physical address
+		space this decoder claims at address N before the decode rotates
+		to the next target in the interleave at address N +
+		interleave_granularity (assuming N is aligned to
+		interleave_granularity).
+
+
+What:		/sys/bus/cxl/devices/decoderX.Y/create_{pmem,ram}_region
+Date:		May, 2022, January, 2023
+KernelVersion:	v6.0 (pmem), v6.3 (ram)
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RW) Write a string in the form 'regionZ' to start the process
+		of defining a new persistent, or volatile memory region
+		(interleave-set) within the decode range bounded by root decoder
+		'decoderX.Y'. The value written must match the current value
+		returned from reading this attribute. An atomic compare exchange
+		operation is done on write to assign the requested id to a
+		region and allocate the region-id for the next creation attempt.
+		EBUSY is returned if the region name written does not match the
+		current cached value.
+
+
+What:		/sys/bus/cxl/devices/decoderX.Y/delete_region
+Date:		May, 2022
+KernelVersion:	v6.0
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(WO) Write a string in the form 'regionZ' to delete that region,
+		provided it is currently idle / not bound to a driver.
+
+
+What:		/sys/bus/cxl/devices/regionZ/uuid
+Date:		May, 2022
+KernelVersion:	v6.0
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RW) Write a unique identifier for the region. This field must
+		be set for persistent regions and it must not conflict with the
+		UUID of another region. For volatile ram regions this
+		attribute is a read-only empty string.
+
+
+What:		/sys/bus/cxl/devices/regionZ/interleave_granularity
+Date:		May, 2022
+KernelVersion:	v6.0
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RW) Set the number of consecutive bytes each device in the
+		interleave set will claim. The possible interleave granularity
+		values are determined by the CXL spec and the participating
+		devices.
+
+
+What:		/sys/bus/cxl/devices/regionZ/interleave_ways
+Date:		May, 2022
+KernelVersion:	v6.0
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RW) Configures the number of devices participating in the
+		region is set by writing this value. Each device will provide
+		1/interleave_ways of storage for the region.
+
+
+What:		/sys/bus/cxl/devices/regionZ/size
+Date:		May, 2022
+KernelVersion:	v6.0
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RW) System physical address space to be consumed by the region.
+		When written trigger the driver to allocate space out of the
+		parent root decoder's address space. When read the size of the
+		address space is reported and should match the span of the
+		region's resource attribute. Size shall be set after the
+		interleave configuration parameters. Once set it cannot be
+		changed, only freed by writing 0. The kernel makes no guarantees
+		that data is maintained over an address space freeing event, and
+		there is no guarantee that a free followed by an allocate
+		results in the same address being allocated.
+
+
+What:		/sys/bus/cxl/devices/regionZ/mode
+Date:		January, 2023
+KernelVersion:	v6.3
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) The mode of a region is established at region creation time
+		and dictates the mode of the endpoint decoder that comprise the
+		region. For more details on the possible modes see
+		/sys/bus/cxl/devices/decoderX.Y/mode
+
+
+What:		/sys/bus/cxl/devices/regionZ/resource
+Date:		May, 2022
+KernelVersion:	v6.0
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RO) A region is a contiguous partition of a CXL root decoder
+		address space. Region capacity is allocated by writing to the
+		size attribute, the resulting physical address space determined
+		by the driver is reflected here. It is therefore not useful to
+		read this before writing a value to the size attribute.
+
+
+What:		/sys/bus/cxl/devices/regionZ/target[0..N]
+Date:		May, 2022
+KernelVersion:	v6.0
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RW) Write an endpoint decoder object name to 'targetX' where X
+		is the intended position of the endpoint device in the region
+		interleave and N is the 'interleave_ways' setting for the
+		region. ENXIO is returned if the write results in an impossible
+		to map decode scenario, like the endpoint is unreachable at that
+		position relative to the root decoder interleave. EBUSY is
+		returned if the position in the region is already occupied, or
+		if the region is not in a state to accept interleave
+		configuration changes. EINVAL is returned if the object name is
+		not an endpoint decoder. Once all positions have been
+		successfully written a final validation for decode conflicts is
+		performed before activating the region.
+
+
+What:		/sys/bus/cxl/devices/regionZ/commit
+Date:		May, 2022
+KernelVersion:	v6.0
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RW) Write a boolean 'true' string value to this attribute to
+		trigger the region to transition from the software programmed
+		state to the actively decoding in hardware state. The commit
+		operation in addition to validating that the region is in proper
+		configured state, validates that the decoders are being
+		committed in spec mandated order (last committed decoder id +
+		1), and checks that the hardware accepts the commit request.
+		Reading this value indicates whether the region is committed or
+		not.
+
+
+What:		/sys/bus/cxl/devices/memX/trigger_poison_list
+Date:		April, 2023
+KernelVersion:	v6.4
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(WO) When a boolean 'true' is written to this attribute the
+		memdev driver retrieves the poison list from the device. The
+		list consists of addresses that are poisoned, or would result
+		in poison if accessed, and the source of the poison. This
+		attribute is only visible for devices supporting the
+		capability. The retrieved errors are logged as kernel
+		events when cxl_poison event tracing is enabled.
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-caps b/Documentation/ABI/testing/sysfs-bus-event_source-devices-caps
new file mode 100644
index 000000000000..8757dcf41c08
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-caps
@@ -0,0 +1,18 @@
+What:		/sys/bus/event_source/devices/<dev>/caps
+Date:		May 2022
+KernelVersion:	5.19
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:
+		Attribute group to describe the capabilities exposed
+		for a particular pmu. Each attribute of this group can
+		expose information specific to a PMU, say pmu_name, so that
+		userspace can understand some of the feature which the
+		platform specific PMU supports.
+
+		One of the example available capability in supported platform
+		like Intel is pmu_name, which exposes underlying CPU name known
+		to the PMU driver.
+
+		Example output in powerpc:
+		grep . /sys/bus/event_source/devices/cpu/caps/*
+		/sys/bus/event_source/devices/cpu/caps/pmu_name:POWER9
diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-iommu b/Documentation/ABI/testing/sysfs-bus-event_source-devices-iommu
new file mode 100644
index 000000000000..d7af4919302e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-iommu
@@ -0,0 +1,37 @@
+What:		/sys/bus/event_source/devices/dmar*/format
+Date:		Jan 2023
+KernelVersion:  6.3
+Contact:	Kan Liang <kan.liang@linux.intel.com>
+Description:	Read-only.  Attribute group to describe the magic bits
+		that go into perf_event_attr.config,
+		perf_event_attr.config1 or perf_event_attr.config2 for
+		the IOMMU pmu.  (See also
+		ABI/testing/sysfs-bus-event_source-devices-format).
+
+		Each attribute in this group defines a bit range in
+		perf_event_attr.config, perf_event_attr.config1,
+		or perf_event_attr.config2. All supported attributes
+		are listed below (See the VT-d Spec 4.0 for possible
+		attribute values)::
+
+		    event		= "config:0-27"   - event ID
+		    event_group		= "config:28-31"  - event group ID
+
+		    filter_requester_en	= "config1:0"     - Enable Requester ID filter
+		    filter_domain_en	= "config1:1"     - Enable Domain ID filter
+		    filter_pasid_en	= "config1:2"     - Enable PASID filter
+		    filter_ats_en	= "config1:3"     - Enable Address Type filter
+		    filter_page_table_en= "config1:4"     - Enable Page Table Level filter
+		    filter_requester_id	= "config1:16-31" - Requester ID filter
+		    filter_domain	= "config1:32-47" - Domain ID filter
+		    filter_pasid	= "config2:0-21"  - PASID filter
+		    filter_ats		= "config2:24-28" - Address Type filter
+		    filter_page_table	= "config2:32-36" - Page Table Level filter
+
+What:		/sys/bus/event_source/devices/dmar*/cpumask
+Date:		Jan 2023
+KernelVersion:	6.3
+Contact:	Kan Liang <kan.liang@linux.intel.com>
+Description:	Read-only. This file always returns the CPU to which the
+		IOMMU pmu is bound for access to all IOMMU pmu performance
+		monitoring events.
diff --git a/Documentation/ABI/testing/sysfs-bus-fcoe b/Documentation/ABI/testing/sysfs-bus-fcoe
index 8fe787cc4ab7..5a4f2091ac37 100644
--- a/Documentation/ABI/testing/sysfs-bus-fcoe
+++ b/Documentation/ABI/testing/sysfs-bus-fcoe
@@ -31,7 +31,7 @@ Description:	'FCoE Controller' instances on the fcoe bus.
 		1) Write interface name to ctlr_create 2) Configure the FCoE
 		Controller (ctlr_X) 3) Enable the FCoE Controller to begin
 		discovery and login. The FCoE Controller is destroyed by
-		writing it's name, i.e. ctlr_X to the ctlr_delete file.
+		writing its name, i.e. ctlr_X to the ctlr_delete file.
 
 Attributes:
 
diff --git a/Documentation/ABI/testing/sysfs-bus-fsi-devices-sbefifo b/Documentation/ABI/testing/sysfs-bus-fsi-devices-sbefifo
new file mode 100644
index 000000000000..531fe9d6b40a
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-fsi-devices-sbefifo
@@ -0,0 +1,10 @@
+What:		/sys/bus/fsi/devices/XX.XX.00:06/sbefifoX/timeout
+KernelVersion:	5.15
+Contact:	eajames@linux.ibm.com
+Description:
+		Indicates whether or not this SBE device has experienced a
+		timeout; i.e. the SBE did not respond within the time allotted
+		by the driver. A value of 1 indicates that a timeout has
+		ocurred and no transfers have completed since the timeout. A
+		value of 0 indicates that no timeout has ocurred, or if one
+		has, more recent transfers have completed successful.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 6ad47a67521c..7140e8e7313f 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -79,6 +79,11 @@ Description:
 		* "accel-base"
 		* "accel-display"
 
+		For devices where an accelerometer is housed in the swivel camera subassembly
+		(for AR application), the following standardized label is used:
+
+		* "accel-camera"
+
 What:		/sys/bus/iio/devices/iio:deviceX/current_timestamp_clock
 KernelVersion:	4.5
 Contact:	linux-iio@vger.kernel.org
@@ -102,6 +107,9 @@ Description:
 		relevant directories.  If it affects all of the above
 		then it is to be found in the base device directory.
 
+		The stm32-timer-trigger has the additional characteristic that
+		a sampling_frequency of 0 is defined to stop sampling.
+
 What:		/sys/bus/iio/devices/iio:deviceX/sampling_frequency_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available
@@ -188,7 +196,7 @@ Description:
 		Raw capacitance measurement from channel Y. Units after
 		application of scale and offset are nanofarads.
 
-What:		/sys/.../iio:deviceX/in_capacitanceY-in_capacitanceZ_raw
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw
 KernelVersion:	3.2
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -199,6 +207,25 @@ Description:
 		is required is a consistent labeling.  Units after application
 		of scale and offset are nanofarads.
 
+What:		/sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_zeropoint
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		For differential channels, this an offset that is applied
+		equally to both inputs. As the reading is of the difference
+		between the two inputs, this should not be applied to the _raw
+		reading by userspace (unlike _offset) and unlike calibbias
+		it does not affect the differential value measured because
+		the effect of _zeropoint cancels out across the two inputs
+		that make up the differential pair. It's purpose is to bring
+		the individual signals, before the differential is measured,
+		within the measurement range of the device. The naming is
+		chosen because if the separate inputs that make the
+		differential pair are drawn on a graph in their
+		_raw  units, this is the value that the zero point on the
+		measurement axis represents. It is expressed with the
+		same scaling as _raw.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_x_raw
@@ -233,6 +260,15 @@ Description:
 		Has all of the equivalent parameters as per voltageY. Units
 		after application of scale and offset are m/s^2.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_linear_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_linear_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_linear_z_raw
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		As per in_accel_X_raw attributes, but minus the
+		acceleration due to gravity.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw
@@ -429,6 +465,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_angl_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_co2_scale
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -475,6 +512,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
@@ -1212,6 +1250,32 @@ Description:
 		number or direction is not specified, applies to all channels of
 		this type.
 
+What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_en
+What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_en
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_en
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Similar to in_accel_mag[_y][_rising|_falling]_en, but the event
+		value is relative to a reference magnitude. The reference magnitude
+		includes the graviational acceleration.
+
+What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_value
+What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_value
+What:		/sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_value
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_value
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_value
+What:		/sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_value
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The value to which the reference magnitude of the channel is
+		compared. If the axis is not specified, it applies to all channels
+		of this type.
+
 What:		/sys/.../events/in_steps_change_en
 KernelVersion:	4.0
 Contact:	linux-iio@vger.kernel.org
@@ -1251,6 +1315,10 @@ Description:
 		Actually start the buffer capture up.  Will start trigger
 		if first device and appropriate.
 
+		Note that it might be impossible to configure other attributes,
+		(e.g.: events, scale, sampling rate) if they impact the currently
+		active buffer capture session.
+
 What:		/sys/bus/iio/devices/iio:deviceX/bufferY
 KernelVersion:	5.11
 Contact:	linux-iio@vger.kernel.org
@@ -1739,8 +1807,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/out_resistanceX_raw
 KernelVersion:	4.3
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Raw (unscaled no offset etc.) resistance reading that can be processed
-		into an ohm value.
+		Raw (unscaled no offset etc.) resistance reading.
+		Units after application of scale and offset are ohms.
 
 What:		/sys/bus/iio/devices/iio:deviceX/heater_enable
 KernelVersion:	4.1.0
@@ -1826,8 +1894,9 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_electricalconductivity_raw
 KernelVersion:	4.8
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Raw (unscaled no offset etc.) electric conductivity reading that
-		can be processed to siemens per meter.
+		Raw (unscaled no offset etc.) electric conductivity reading.
+		Units after application of scale and offset are siemens per
+		meter.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_countY_raw
 KernelVersion:	4.10
@@ -1883,8 +1952,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_phaseY_raw
 KernelVersion:	4.18
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Raw (unscaled) phase difference reading from channel Y
-		that can be processed to radians.
+		Raw (unscaled) phase difference reading from channel Y.
+		Units after application of scale and offset are radians.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm1_input
 What:		/sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm1_input
@@ -1957,3 +2026,140 @@ Description:
 		Specify the percent for light sensor relative to the channel
 		absolute value that a data field should change before an event
 		is generated. Units are a percentage of the prior reading.
+
+What:		/sys/bus/iio/devices/iio:deviceX/calibration_auto_enable
+Date:		June 2020
+KernelVersion:	5.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Some sensors have the ability to apply auto calibration at
+		runtime. For example, it may be necessary to compensate for
+		contaminant build-up in a measurement chamber or optical
+		element deterioration that would otherwise lead to sensor drift.
+
+		Writing 1 or 0 to this attribute will respectively activate or
+		deactivate this auto calibration function.
+
+		Upon reading, the current status is returned.
+
+What:		/sys/bus/iio/devices/iio:deviceX/calibration_forced_value
+Date:		June 2020
+KernelVersion:	5.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Some sensors have the ability to apply a manual calibration using
+		a known measurement value, perhaps obtained from an external
+		reference device.
+
+		Writing a value to this function will force such a calibration
+		change. For the scd30 the value should be from the range
+		[400 1 2000].
+
+		Note for the scd30 that a valid value may only be obtained once
+		it is has been written. Until then any read back of this value
+		should be ignored. As for the scd4x an error will be returned
+		immediately if the manual calibration has failed.
+
+What:		/sys/bus/iio/devices/iio:deviceX/calibration_forced_value_available
+KernelVersion:  5.15
+Contact:        linux-iio@vger.kernel.org
+Description:
+		Available range for the forced calibration value, expressed as:
+
+		- a range specified as "[min step max]"
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageX_sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/in_powerY_sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentZ_sampling_frequency
+KernelVersion:	5.20
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Some devices have separate controls of sampling frequency for
+		individual channels. If multiple channels are enabled in a scan,
+		then the sampling_frequency of the scan may be computed from the
+		per channel sampling frequencies.
+
+What:		/sys/.../events/in_accel_gesture_singletap_en
+What:		/sys/.../events/in_accel_gesture_doubletap_en
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Device generates an event on a single or double tap.
+
+What:		/sys/.../events/in_accel_gesture_singletap_value
+What:		/sys/.../events/in_accel_gesture_doubletap_value
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the threshold value that the device is comparing
+		against to generate the tap gesture event. The lower
+		threshold value increases the sensitivity of tap detection.
+		Units and the exact meaning of value are device-specific.
+
+What:		/sys/.../events/in_accel_gesture_tap_value_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available threshold values which can be used to
+		modify the sensitivity of the tap detection.
+
+What:		/sys/.../events/in_accel_gesture_singletap_reset_timeout
+What:		/sys/.../events/in_accel_gesture_doubletap_reset_timeout
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the timeout value in seconds for the tap detector
+		to not to look for another tap event after the event as
+		occurred. Basically the minimum quiet time between the two
+		single-tap's or two double-tap's.
+
+What:		/sys/.../events/in_accel_gesture_tap_reset_timeout_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available tap reset timeout values. Units in seconds.
+
+What:		/sys/.../events/in_accel_gesture_doubletap_tap2_min_delay
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the minimum quiet time in seconds between the two
+		taps of a double tap.
+
+What:		/sys/.../events/in_accel_gesture_doubletap_tap2_min_delay_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available delay values between two taps in the double
+		tap. Units in seconds.
+
+What:		/sys/.../events/in_accel_gesture_tap_maxtomin_time
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the maximum time difference allowed between upper
+		and lower peak of tap to consider it as the valid tap event.
+		Units in seconds.
+
+What:		/sys/.../events/in_accel_gesture_tap_maxtomin_time_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Lists all available time values between upper peak to lower
+		peak. Units in seconds.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_yaw_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_pitch_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_roll_raw
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled) euler angles readings. Units after
+		application of scale are deg.
+
+What:		/sys/bus/iio/devices/iio:deviceX/serialnumber
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		An example format is 16-bytes, 2-digits-per-byte, HEX-string
+		representing the sensor unique ID number.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130 b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
new file mode 100644
index 000000000000..f24ed6687e90
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130
@@ -0,0 +1,46 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_mode_available
+KernelVersion:  6.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reading returns a list with the possible filter modes.
+
+		  * "sinc4"       - Sinc 4. Excellent noise performance. Long
+                    1st conversion time. No natural 50/60Hz rejection.
+
+		  * "sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion
+		    time.
+
+		  * "sinc3"	      - Sinc3. Moderate 1st conversion time.
+		    Good noise performance.
+
+		  * "sinc3+rej60" - Sinc3 + 60Hz rejection. At a sampling
+		    frequency of 50Hz, achieves simultaneous 50Hz and 60Hz
+		    rejection.
+
+		  * "sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion
+		    time. Best used with a sampling frequency of at least
+		    216.19Hz.
+
+		  * "sinc3+pf1"   - Sinc3 + Post Filter 1. 53dB rejection @
+		    50Hz, 58dB rejection @ 60Hz.
+
+		  * "sinc3+pf2"   - Sinc3 + Post Filter 2. 70dB rejection @
+		    50Hz, 70dB rejection @ 60Hz.
+
+		  * "sinc3+pf3"   - Sinc3 + Post Filter 3. 99dB rejection @
+		    50Hz, 103dB rejection @ 60Hz.
+
+		  * "sinc3+pf4"   - Sinc3 + Post Filter 4. 103dB rejection @
+		    50Hz, 109dB rejection @ 60Hz.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_filter_mode
+KernelVersion:  6.2
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Set the filter mode of the differential channel. When the filter
+		mode changes, the in_voltageY-voltageZ_sampling_frequency and
+		in_voltageY-voltageZ_sampling_frequency_available attributes
+		might also change to accommodate the new filter mode.
+		If the current sampling frequency is out of range for the new
+		filter mode, the sampling frequency will be changed to the
+		closest valid one.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7280a b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7280a
new file mode 100644
index 000000000000..83b7efe6aa07
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7280a
@@ -0,0 +1,13 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_balance_switch_en
+KernelVersion:	5.14
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Used to enable an output for balancing cells for time
+		controlled via in_voltage_Y-voltageZ_balance_switch_timer.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_balance_switch_timer
+KernelVersion:	5.14
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Time in seconds for which balance switch will be turned on.
+		Multiple of 71.5 seconds.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-max11410 b/Documentation/ABI/testing/sysfs-bus-iio-adc-max11410
new file mode 100644
index 000000000000..2a53c6b37360
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-max11410
@@ -0,0 +1,13 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_filterY_notch_en
+Date:		September 2022
+KernelVersion:  6.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Enable or disable a notch filter.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_filterY_notch_center
+Date:		September 2022
+KernelVersion:  6.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Center frequency of the notch filter in Hz.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-bno055 b/Documentation/ABI/testing/sysfs-bus-iio-bno055
new file mode 100644
index 000000000000..f32b1644e986
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-bno055
@@ -0,0 +1,81 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_raw_range
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw (unscaled) range for acceleration readings. Unit after
+		application of scale is m/s^2. Note that this doesn't affects
+		the scale (which should be used when changing the maximum and
+		minimum readable value affects also the reading scaling factor).
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Range for angular velocity readings in radians per second. Note
+		that this does not affects the scale (which should be used when
+		changing the maximum and minimum readable value affects also the
+		reading scaling factor).
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_raw_range_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		List of allowed values for in_accel_raw_range attribute
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range_available
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		List of allowed values for in_anglvel_raw_range attribute
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_calibration_fast_enable
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Can be 1 or 0. Enables/disables the "Fast Magnetometer
+		Calibration" HW function.
+
+What:		/sys/bus/iio/devices/iio:deviceX/fusion_enable
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Can be 1 or 0. Enables/disables the "sensor fusion" (a.k.a.
+		NDOF) HW function.
+
+What:		/sys/bus/iio/devices/iio:deviceX/calibration_data
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reports the binary calibration data blob for the IMU sensors.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_calibration_auto_status
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reports the autocalibration status for the accelerometer sensor.
+		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+		the number, the better the calibration status.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_gyro_calibration_auto_status
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reports the autocalibration status for the gyroscope sensor.
+		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+		the number, the better the calibration status.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_calibration_auto_status
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reports the autocalibration status for the magnetometer sensor.
+		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+		the number, the better the calibration status.
+
+What:		/sys/bus/iio/devices/iio:deviceX/sys_calibration_auto_status
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reports the status for the IMU overall autocalibration.
+		Can be 0 (calibration non even enabled) or 1 to 5 where the greater
+		the number, the better the calibration status.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746 b/Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746
new file mode 100644
index 000000000000..02ca8941dce1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746
@@ -0,0 +1,11 @@
+What:		/sys/.../iio:deviceX/in_capacitableY_calibbias_calibration
+What:		/sys/.../iio:deviceX/in_capacitableY_calibscale_calibration
+KernelVersion:	6.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Write 1 to trigger a calibration of the calibbias or
+		calibscale. For calibscale, a full scale capacitance should
+		be connected to the capacitance input and a
+		calibscale_calibration then started.  For calibbias see
+		the device datasheet section on "capacitive system offset
+		calibration".
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-chemical-sunrise-co2 b/Documentation/ABI/testing/sysfs-bus-iio-chemical-sunrise-co2
new file mode 100644
index 000000000000..ee7aeb11709b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-chemical-sunrise-co2
@@ -0,0 +1,38 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_co2_calibration_factory
+Date:		August 2021
+KernelVersion:	5.16
+Contact:	Jacopo Mondi <jacopo@jmondi.org>
+Description:
+		Writing '1' triggers a 'Factory' calibration cycle.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_co2_calibration_background
+Date:		August 2021
+KernelVersion:	5.16
+Contact:	Jacopo Mondi <jacopo@jmondi.org>
+Description:
+		Writing '1' triggers a 'Background' calibration cycle.
+
+What:		/sys/bus/iio/devices/iio:deviceX/error_status_available
+Date:		August 2021
+KernelVersion:	5.16
+Contact:	Jacopo Mondi <jacopo@jmondi.org>
+Description:
+		Reading returns the list of possible chip error status.
+		Available options are:
+		- 'error_fatal': Analog front-end initialization error
+		- 'error_i2c': Read/write to non-existing register
+		- 'error_algorithm': Corrupted parameters
+		- 'error_calibration': Calibration has failed
+		- 'error_self_diagnostic': Internal interface failure
+		- 'error_out_of_range': Measured concentration out of scale
+		- 'error_memory': Error during memory operations
+		- 'error_no_measurement': Cleared at first measurement
+		- 'error_low_voltage': Sensor regulated voltage too low
+		- 'error_measurement_timeout': Unable to complete measurement
+
+What:		/sys/bus/iio/devices/iio:deviceX/error_status
+Date:		August 2021
+KernelVersion:	5.16
+Contact:	Jacopo Mondi <jacopo@jmondi.org>
+Description:
+		Reading returns the current chip error status.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 b/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
new file mode 100644
index 000000000000..1c35971277ba
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
@@ -0,0 +1,86 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_en
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Dither enable. Write 1 to enable dither or 0 to disable it. This is useful
+		for changing the dither parameters. They way it should be done is:
+
+		- disable dither operation;
+		- change dither parameters (eg: frequency, phase...);
+		- enabled dither operation
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This raw, unscaled value refers to the dither signal amplitude.
+		The same scale as in out_voltageY_raw applies. However, the
+		offset might be different as it's always 0 for this attribute.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw_available
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Available range for dither raw amplitude values.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_offset
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Offset applied to out_voltageY_dither_raw. Read only attribute
+		always set to 0.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Sets the dither signal frequency. Units are in Hz.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency_available
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Returns the available values for the dither frequency.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Sets the dither signal phase. Units are in Radians.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase_available
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Returns the available values for the dither phase.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Toggle enable. Write 1 to enable toggle or 0 to disable it. This is
+		useful when one wants to change the DAC output codes. The way it should
+		be done is:
+
+		- disable toggle operation;
+		- change out_voltageY_raw0 and out_voltageY_raw1;
+		- enable toggle operation.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw0
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw1
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		It has the same meaning as out_voltageY_raw. This attribute is
+		specific to toggle enabled channels and refers to the DAC output
+		code in INPUT_A (_raw0) and INPUT_B (_raw1). The same scale and offset
+		as in out_voltageY_raw applies.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Performs a SW toggle. This attribute is specific to toggle
+		enabled channels and allows to toggle between out_voltageY_raw0
+		and out_voltageY_raw1 through software. Writing 0 will select
+		out_voltageY_raw0 while 1 selects out_voltageY_raw1.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818 b/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
new file mode 100644
index 000000000000..f6c035752639
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
@@ -0,0 +1,16 @@
+What:		/sys/bus/iio/devices/iio:deviceX/filter_mode_available
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reading this returns the valid values that can be written to the
+		on_altvoltage0_mode attribute:
+
+		- auto -> Adjust bandpass filter to track changes in input clock rate.
+		- manual -> disable/unregister the clock rate notifier / input clock tracking.
+
+What:		/sys/bus/iio/devices/iio:deviceX/filter_mode
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute configures the filter mode.
+		Reading returns the actual mode.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1013 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1013
new file mode 100644
index 000000000000..de1e323e5d47
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1013
@@ -0,0 +1,38 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0-1_i_calibphase
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read/write unscaled value for the Local Oscillatior path quadrature I phase shift.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0-1_q_calibphase
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read/write unscaled value for the Local Oscillatior path quadrature Q phase shift.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_i_calibbias
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read/write value for the Local Oscillatior Feedthrough Offset Calibration I Positive
+		side.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_q_calibbias
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read/write value for the Local Oscillatior Feedthrough Offset Calibration Q Positive side.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage1_i_calibbias
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read/write raw value for the Local Oscillatior Feedthrough Offset Calibration I Negative
+		side.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage1_q_calibbias
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read/write raw value for the Local Oscillatior Feedthrough Offset Calibration Q Negative
+		side.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014
new file mode 100644
index 000000000000..395010a0ef8b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014
@@ -0,0 +1,23 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_i_calibscale_coarse
+KernelVersion: 5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read/write value for the digital attenuator gain (IF_I) with coarse steps.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_q_calibscale_coarse
+KernelVersion: 5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read/write value for the digital attenuator gain (IF_Q) with coarse steps.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_i_calibscale_fine
+KernelVersion: 5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read/write value for the digital attenuator gain (IF_I) with fine steps.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage0_q_calibscale_fine
+KernelVersion: 5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Read/write value for the digital attenuator gain (IF_Q) with fine steps.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity b/Documentation/ABI/testing/sysfs-bus-iio-proximity
index 3aac6dab8775..9b9d1cc9b703 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-proximity
+++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity
@@ -18,7 +18,7 @@ Description:
 		on the signal from which time of flight measurements are
 		taken.
 		The appropriate values to take is dependent on both the
-		sensor and it's operating environment:
+		sensor and its operating environment:
 		* as3935 (0-31 range)
 		18 = indoors (default)
 		14 = outdoors
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-scd30 b/Documentation/ABI/testing/sysfs-bus-iio-scd30
deleted file mode 100644
index b9712f390bec..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-iio-scd30
+++ /dev/null
@@ -1,34 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/calibration_auto_enable
-Date:		June 2020
-KernelVersion:	5.8
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Contaminants build-up in the measurement chamber or optical
-		elements deterioration leads to sensor drift.
-
-		One can compensate for sensor drift by using automatic self
-		calibration procedure (asc).
-
-		Writing 1 or 0 to this attribute will respectively activate or
-		deactivate asc.
-
-		Upon reading current asc status is returned.
-
-What:		/sys/bus/iio/devices/iio:deviceX/calibration_forced_value
-Date:		June 2020
-KernelVersion:	5.8
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Contaminants build-up in the measurement chamber or optical
-		elements deterioration leads to sensor drift.
-
-		One can compensate for sensor drift by using forced
-		recalibration (frc). This is useful in case there's known
-		co2 reference available nearby the sensor.
-
-		Picking value from the range [400 1 2000] and writing it to the
-		sensor will set frc.
-
-		Upon reading current frc value is returned. Note that after
-		power cycling default value (i.e 400) is returned even though
-		internally sensor had recalibrated itself.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-sx9324 b/Documentation/ABI/testing/sysfs-bus-iio-sx9324
new file mode 100644
index 000000000000..a8342770e7cb
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-sx9324
@@ -0,0 +1,29 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity<id>_setup
+Date:		November 2021
+KernelVersion:	5.17
+Contact:	Gwendal Grignou <gwendal@chromium.org>
+Description:
+		SX9324 has 3 inputs, CS0, CS1 and CS2. Hardware layout
+		defines if the input is
+
+		+ not connected (HZ),
+		+ grounded (GD),
+		+ connected to an antenna where it can act as a base
+		  (DS - data shield), or measured input (MI).
+
+		The sensor rotates measurement across 4 phases
+		(PH0, PH1, PH2, PH3), where the inputs are configured
+		and then measured.
+
+		By default,  during the first phase, [PH0], CS0 is measured,
+		while CS1 and CS2 are used as shields.
+		`cat in_proximity0_setup` returns "MI,DS,DS".
+		[PH1], CS1 is measured, CS0 and CS2 are shield:
+		`cat in_proximity1_setup` returns "DS,MI,DS".
+		[PH2], CS2 is measured, CS0 and CS1 are shield:
+		`cat in_proximity1_setup` returns "DS,DS,MI".
+		[PH3], CS1 and CS2 are measured (combo mode):
+		`cat in_proximity1_setup` returns "DS,MI,MI".
+
+		Note, these are the chip default. Hardware layout will most
+		likely dictate different output. The entry is read-only.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856 b/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856
deleted file mode 100644
index e5ef6d8e5da1..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856
+++ /dev/null
@@ -1,31 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/fault_oc
-KernelVersion:	5.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Open-circuit fault. The detection of open-circuit faults,
-		such as those caused by broken thermocouple wires.
-		Reading returns either '1' or '0'.
-
-		===  =======================================================
-		'1'  An open circuit such as broken thermocouple wires
-		     has been detected.
-		'0'  No open circuit or broken thermocouple wires are detected
-		===  =======================================================
-
-What:		/sys/bus/iio/devices/iio:deviceX/fault_ovuv
-KernelVersion:	5.1
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Overvoltage or Undervoltage Input Fault. The internal circuitry
-		is protected from excessive voltages applied to the thermocouple
-		cables by integrated MOSFETs at the T+ and T- inputs, and the
-		BIAS output. These MOSFETs turn off when the input voltage is
-		negative or greater than VDD.
-
-		Reading returns either '1' or '0'.
-
-		===  =======================================================
-		'1'  The input voltage is negative or greater than VDD.
-		'0'  The input voltage is positive and less than VDD (normal
-		     state).
-		===  =======================================================
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-thermocouple b/Documentation/ABI/testing/sysfs-bus-iio-thermocouple
new file mode 100644
index 000000000000..01259df297ca
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-thermocouple
@@ -0,0 +1,18 @@
+What:		/sys/bus/iio/devices/iio:deviceX/fault_ovuv
+KernelVersion:	5.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Overvoltage or Undervoltage Input Fault. The internal circuitry
+		is protected from excessive voltages applied to the thermocouple
+		cables. The device can also detect if such a condition occurs.
+
+		Reading returns '1' if input voltage is negative or greater
+		than VDD, otherwise '0'.
+
+What:		/sys/bus/iio/devices/iio:deviceX/fault_oc
+KernelVersion:	5.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Open-circuit fault. The detection of open-circuit faults,
+		such as those caused by broken thermocouple wires.
+		Reading returns '1' if fault, '0' otherwise.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
index c4a4497c249a..05074c4a65e2 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
+++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
@@ -90,14 +90,6 @@ Description:
 		Reading returns the current master modes.
 		Writing set the master mode
 
-What:		/sys/bus/iio/devices/triggerX/sampling_frequency
-KernelVersion:	4.11
-Contact:	benjamin.gaignard@st.com
-Description:
-		Reading returns the current sampling frequency.
-		Writing an value different of 0 set and start sampling.
-		Writing 0 stop sampling.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_count0_preset
 KernelVersion:	4.12
 Contact:	benjamin.gaignard@st.com
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-vf610 b/Documentation/ABI/testing/sysfs-bus-iio-vf610
index 308a6756d3bf..491ead804488 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-vf610
+++ b/Documentation/ABI/testing/sysfs-bus-iio-vf610
@@ -1,4 +1,4 @@
-What:		/sys/bus/iio/devices/iio:deviceX/conversion_mode
+What:		/sys/bus/iio/devices/iio:deviceX/in_conversion_mode
 KernelVersion:	4.2
 Contact:	linux-iio@vger.kernel.org
 Description:
diff --git a/Documentation/ABI/testing/sysfs-bus-mdio b/Documentation/ABI/testing/sysfs-bus-mdio
index da86efc7781b..38be04dfc05e 100644
--- a/Documentation/ABI/testing/sysfs-bus-mdio
+++ b/Documentation/ABI/testing/sysfs-bus-mdio
@@ -1,4 +1,5 @@
 What:          /sys/bus/mdio_bus/devices/.../statistics/
+What:          /sys/class/mdio_bus/.../statistics/
 Date:          January 2020
 KernelVersion: 5.6
 Contact:       netdev@vger.kernel.org
@@ -7,6 +8,7 @@ Description:
 		MDIO bus address statistics.
 
 What:          /sys/bus/mdio_bus/devices/.../statistics/transfers
+What:          /sys/class/mdio_bus/.../transfers
 Date:          January 2020
 KernelVersion: 5.6
 Contact:       netdev@vger.kernel.org
@@ -14,6 +16,7 @@ Description:
 		Total number of transfers for this MDIO bus.
 
 What:          /sys/bus/mdio_bus/devices/.../statistics/errors
+What:          /sys/class/mdio_bus/.../statistics/errors
 Date:          January 2020
 KernelVersion: 5.6
 Contact:       netdev@vger.kernel.org
@@ -21,6 +24,7 @@ Description:
 		Total number of transfer errors for this MDIO bus.
 
 What:          /sys/bus/mdio_bus/devices/.../statistics/writes
+What:          /sys/class/mdio_bus/.../statistics/writes
 Date:          January 2020
 KernelVersion: 5.6
 Contact:       netdev@vger.kernel.org
@@ -28,6 +32,7 @@ Description:
 		Total number of write transactions for this MDIO bus.
 
 What:          /sys/bus/mdio_bus/devices/.../statistics/reads
+What:          /sys/class/mdio_bus/.../statistics/reads
 Date:          January 2020
 KernelVersion: 5.6
 Contact:       netdev@vger.kernel.org
@@ -35,6 +40,7 @@ Description:
 		Total number of read transactions for this MDIO bus.
 
 What:          /sys/bus/mdio_bus/devices/.../statistics/transfers_<addr>
+What:          /sys/class/mdio_bus/.../statistics/transfers_<addr>
 Date:          January 2020
 KernelVersion: 5.6
 Contact:       netdev@vger.kernel.org
@@ -42,6 +48,7 @@ Description:
 		Total number of transfers for this MDIO bus address.
 
 What:          /sys/bus/mdio_bus/devices/.../statistics/errors_<addr>
+What:          /sys/class/mdio_bus/.../statistics/errors_<addr>
 Date:          January 2020
 KernelVersion: 5.6
 Contact:       netdev@vger.kernel.org
@@ -49,6 +56,7 @@ Description:
 		Total number of transfer errors for this MDIO bus address.
 
 What:          /sys/bus/mdio_bus/devices/.../statistics/writes_<addr>
+What:          /sys/class/mdio_bus/.../statistics/writes_<addr>
 Date:          January 2020
 KernelVersion: 5.6
 Contact:       netdev@vger.kernel.org
@@ -56,6 +64,7 @@ Description:
 		Total number of write transactions for this MDIO bus address.
 
 What:          /sys/bus/mdio_bus/devices/.../statistics/reads_<addr>
+What:          /sys/class/mdio_bus/.../statistics/reads_<addr>
 Date:          January 2020
 KernelVersion: 5.6
 Contact:       netdev@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-nvdimm b/Documentation/ABI/testing/sysfs-bus-nvdimm
index bff84a16812a..de8c5a59c77f 100644
--- a/Documentation/ABI/testing/sysfs-bus-nvdimm
+++ b/Documentation/ABI/testing/sysfs-bus-nvdimm
@@ -6,3 +6,52 @@ Description:
 
 The libnvdimm sub-system implements a common sysfs interface for
 platform nvdimm resources. See Documentation/driver-api/nvdimm/.
+
+What:           /sys/bus/event_source/devices/nmemX/format
+Date:           February 2022
+KernelVersion:  5.18
+Contact:        Kajol Jain <kjain@linux.ibm.com>
+Description:	(RO) Attribute group to describe the magic bits
+		that go into perf_event_attr.config for a particular pmu.
+		(See ABI/testing/sysfs-bus-event_source-devices-format).
+
+		Each attribute under this group defines a bit range of the
+		perf_event_attr.config. Supported attribute is listed
+		below::
+		  event  = "config:0-4"  - event ID
+
+		For example::
+			ctl_res_cnt = "event=0x1"
+
+What:           /sys/bus/event_source/devices/nmemX/events
+Date:           February 2022
+KernelVersion:  5.18
+Contact:        Kajol Jain <kjain@linux.ibm.com>
+Description:	(RO) Attribute group to describe performance monitoring events
+                for the nvdimm memory device. Each attribute in this group
+                describes a single performance monitoring event supported by
+                this nvdimm pmu.  The name of the file is the name of the event.
+                (See ABI/testing/sysfs-bus-event_source-devices-events). A
+                listing of the events supported by a given nvdimm provider type
+                can be found in Documentation/driver-api/nvdimm/$provider.
+
+What:          /sys/bus/event_source/devices/nmemX/cpumask
+Date:          February 2022
+KernelVersion:  5.18
+Contact:        Kajol Jain <kjain@linux.ibm.com>
+Description:	(RO) This sysfs file exposes the cpumask which is designated to
+		to retrieve nvdimm pmu event counter data.
+
+What:		/sys/bus/nd/devices/nmemX/cxl/id
+Date:		November 2022
+KernelVersion:	6.2
+Contact:	Dave Jiang <dave.jiang@intel.com>
+Description:	(RO) Show the id (serial) of the device. This is CXL specific.
+
+What:		/sys/bus/nd/devices/nmemX/cxl/provider
+Date:		November 2022
+KernelVersion:	6.2
+Contact:	Dave Jiang <dave.jiang@intel.com>
+Description:	(RO) Shows the CXL bridge device that ties to a CXL memory device
+		to this NVDIMM device. I.e. the parent of the device returned is
+		a /sys/bus/cxl/devices/memX instance.
diff --git a/Documentation/ABI/testing/sysfs-bus-papr-pmem b/Documentation/ABI/testing/sysfs-bus-papr-pmem
index 95254cec92bf..4ac0673901e7 100644
--- a/Documentation/ABI/testing/sysfs-bus-papr-pmem
+++ b/Documentation/ABI/testing/sysfs-bus-papr-pmem
@@ -61,3 +61,15 @@ Description:
 		* "CchRHCnt" : Cache Read Hit Count
 		* "CchWHCnt" : Cache Write Hit Count
 		* "FastWCnt" : Fast Write Count
+
+What:		/sys/bus/nd/devices/nmemX/papr/health_bitmap_inject
+Date:		Jan, 2022
+KernelVersion:	v5.17
+Contact:	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, nvdimm@lists.linux.dev,
+Description:
+		(RO) Reports the health bitmap inject bitmap that is applied to
+		bitmap received from PowerVM via the H_SCM_HEALTH. This is used
+		to forcibly set specific bits returned from Hcall. These is then
+		used to simulate various health or shutdown states for an nvdimm
+		and are set by user-space tools like ndctl by issuing a PAPR DSM.
+
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index d4ae03296861..ecf47559f495 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -1,4 +1,5 @@
 What:		/sys/bus/pci/drivers/.../bind
+What:		/sys/devices/pciX/.../bind
 Date:		December 2003
 Contact:	linux-pci@vger.kernel.org
 Description:
@@ -14,6 +15,7 @@ Description:
 		(Note: kernels before 2.6.28 may require echo -n).
 
 What:		/sys/bus/pci/drivers/.../unbind
+What:		/sys/devices/pciX/.../unbind
 Date:		December 2003
 Contact:	linux-pci@vger.kernel.org
 Description:
@@ -29,6 +31,7 @@ Description:
 		(Note: kernels before 2.6.28 may require echo -n).
 
 What:		/sys/bus/pci/drivers/.../new_id
+What:		/sys/devices/pciX/.../new_id
 Date:		December 2003
 Contact:	linux-pci@vger.kernel.org
 Description:
@@ -47,6 +50,7 @@ Description:
 		  # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
 
 What:		/sys/bus/pci/drivers/.../remove_id
+What:		/sys/devices/pciX/.../remove_id
 Date:		February 2009
 Contact:	Chris Wright <chrisw@sous-sol.org>
 Description:
@@ -96,6 +100,17 @@ Description:
 		This attribute indicates the mode that the irq vector named by
 		the file is in (msi vs. msix)
 
+What:		/sys/bus/pci/devices/.../irq
+Date:		August 2021
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		If a driver has enabled MSI (not MSI-X), "irq" contains the
+		IRQ of the first MSI vector. Otherwise "irq" contains the
+		IRQ of the legacy INTx interrupt.
+
+		"irq" being set to 0 indicates that the device isn't
+		capable of generating legacy INTx interrupts.
+
 What:		/sys/bus/pci/devices/.../remove
 Date:		January 2009
 Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
@@ -160,7 +175,7 @@ Description:
 		If the underlying VPD has a writable section then the
 		corresponding section of this file will be writable.
 
-What:		/sys/bus/pci/devices/.../virtfnN
+What:		/sys/bus/pci/devices/.../virtfn<N>
 Date:		March 2009
 Contact:	Yu Zhao <yu.zhao@intel.com>
 Description:
@@ -187,6 +202,24 @@ Description:
 		The symbolic link points to the PCI device sysfs entry of the
 		Physical Function this device associates with.
 
+What:		/sys/bus/pci/devices/.../modalias
+Date:		May 2005
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		This attribute indicates the PCI ID of the device object.
+
+		That is in the format:
+		pci:vXXXXXXXXdXXXXXXXXsvXXXXXXXXsdXXXXXXXXbcXXscXXiXX,
+		where:
+
+		    - vXXXXXXXX contains the vendor ID;
+		    - dXXXXXXXX contains the device ID;
+		    - svXXXXXXXX contains the sub-vendor ID;
+		    - sdXXXXXXXX contains the subsystem device ID;
+		    - bcXX contains the device class;
+		    - scXX contains the device subclass;
+		    - iXX contains the device class programming interface.
+
 What:		/sys/bus/pci/slots/.../module
 Date:		June 2009
 Contact:	linux-pci@vger.kernel.org
@@ -374,6 +407,16 @@ Description:
 	        file contains a '1' if the memory has been published for
 		use outside the driver that owns the device.
 
+What:		/sys/bus/pci/devices/.../p2pmem/allocate
+Date:		August 2022
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:
+		This file allows mapping p2pmem into userspace. For each
+		mmap() call on this file, the kernel will allocate a chunk
+		of Peer-to-Peer memory for use in Peer-to-Peer transactions.
+		This memory can be used in O_DIRECT calls to NVMe backed
+		files for Peer-to-Peer copies.
+
 What:		/sys/bus/pci/devices/.../link/clkpm
 		/sys/bus/pci/devices/.../link/l0s_aspm
 		/sys/bus/pci/devices/.../link/l1_aspm
@@ -424,3 +467,36 @@ Description:
 
 		The file is writable if the PF is bound to a driver that
 		implements ->sriov_set_msix_vec_count().
+
+What:		/sys/bus/pci/devices/.../resourceN_resize
+Date:		September 2022
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		These files provide an interface to PCIe Resizable BAR support.
+		A file is created for each BAR resource (N) supported by the
+		PCIe Resizable BAR extended capability of the device.  Reading
+		each file exposes the bitmap of available resource sizes:
+
+		# cat resource1_resize
+		00000000000001c0
+
+		The bitmap represents supported resource sizes for the BAR,
+		where bit0 = 1MB, bit1 = 2MB, bit2 = 4MB, etc.  In the above
+		example the device supports 64MB, 128MB, and 256MB BAR sizes.
+
+		When writing the file, the user provides the bit position of
+		the desired resource size, for example:
+
+		# echo 7 > resource1_resize
+
+		This indicates to set the size value corresponding to bit 7,
+		128MB.  The resulting size is 2 ^ (bit# + 20).  This definition
+		matches the PCIe specification of this capability.
+
+		In order to make use of resource resizing, all PCI drivers must
+		be unbound from the device and peer devices under the same
+		parent bridge may need to be soft removed.  In the case of
+		VGA devices, writing a resize value will remove low level
+		console drivers from the device.  Raw users of pci-sysfs
+		resourceN attributes must be terminated prior to resizing.
+		Success of the resizing operation is not guaranteed.
diff --git a/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd b/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd
index 0088aba4caa8..5a775b8f6543 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd
+++ b/Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd
@@ -23,3 +23,55 @@ Description:
 		Reading this attribute gives the state of the DbC. It
 		can be one of the following states: disabled, enabled,
 		initialized, connected, configured and stalled.
+
+What:		/sys/bus/pci/drivers/xhci_hcd/.../dbc_idVendor
+Date:		March 2023
+Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+		This dbc_idVendor attribute lets us change the idVendor field
+		presented in the USB device descriptor by this xhci debug
+		device.
+		Value can only be changed while debug capability (DbC) is in
+		disabled state to prevent USB device descriptor change while
+		connected to a USB host.
+		The default value is 0x1d6b (Linux Foundation).
+		It can be any 16-bit integer.
+
+What:		/sys/bus/pci/drivers/xhci_hcd/.../dbc_idProduct
+Date:		March 2023
+Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+		This dbc_idProduct attribute lets us change the idProduct field
+		presented in the USB device descriptor by this xhci debug
+		device.
+		Value can only be changed while debug capability (DbC) is in
+		disabled state to prevent USB device descriptor change while
+		connected to a USB host.
+		The default value is 0x0010. It can be any 16-bit integer.
+
+What:		/sys/bus/pci/drivers/xhci_hcd/.../dbc_bcdDevice
+Date:		March 2023
+Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+		This dbc_bcdDevice attribute lets us change the bcdDevice field
+		presented in the USB device descriptor by this xhci debug
+		device.
+		Value can only be changed while debug capability (DbC) is in
+		disabled state to prevent USB device descriptor change while
+		connected to a USB host.
+		The default value is 0x0010. (device rev 0.10)
+		It can be any 16-bit integer.
+
+What:		/sys/bus/pci/drivers/xhci_hcd/.../dbc_bInterfaceProtocol
+Date:		March 2023
+Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
+Description:
+		This attribute lets us change the bInterfaceProtocol field
+		presented in the USB Interface descriptor by the xhci debug
+		device.
+		Value can only be changed while debug capability (DbC) is in
+		disabled state to prevent USB descriptor change while
+		connected to a USB host.
+		The default value is 1  (GNU Remote Debug command).
+		Other permissible value is 0 which is for vendor defined debug
+		target.
diff --git a/Documentation/ABI/testing/sysfs-bus-peci b/Documentation/ABI/testing/sysfs-bus-peci
new file mode 100644
index 000000000000..87454ec5d981
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-peci
@@ -0,0 +1,16 @@
+What:		/sys/bus/peci/rescan
+Date:		July 2021
+KernelVersion:	5.18
+Contact:	Iwona Winiarska <iwona.winiarska@intel.com>
+Description:
+		Writing a non-zero value to this attribute will
+		initiate scan for PECI devices on all PECI controllers
+		in the system.
+
+What:		/sys/bus/peci/devices/<controller_id>-<device_addr>/remove
+Date:		July 2021
+KernelVersion:	5.18
+Contact:	Iwona Winiarska <iwona.winiarska@intel.com>
+Description:
+		Writing a non-zero value to this attribute will
+		remove the PECI device and any of its children.
diff --git a/Documentation/ABI/testing/sysfs-bus-platform b/Documentation/ABI/testing/sysfs-bus-platform
index ff30728595ef..c4dfe7355c2d 100644
--- a/Documentation/ABI/testing/sysfs-bus-platform
+++ b/Documentation/ABI/testing/sysfs-bus-platform
@@ -42,3 +42,15 @@ Date:		August 2021
 Contact:	Barry Song <song.bao.hua@hisilicon.com>
 Description:
 		This attribute will show "msi" if <N> is a valid msi irq
+
+What:		/sys/bus/platform/devices/.../modalias
+Description:
+		Same as MODALIAS in the uevent at device creation.
+
+		A platform device that it is exposed via devicetree uses:
+
+			- of:N`of node name`T`type`
+
+		Other platform devices use, instead:
+
+			- platform:`driver name`
diff --git a/Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro b/Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro
new file mode 100644
index 000000000000..fead760dcf77
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-platform-devices-ampere-smpro
@@ -0,0 +1,325 @@
+What:		/sys/bus/platform/devices/smpro-errmon.*/error_[core|mem|pcie|other]_[ce|ue]
+KernelVersion:	6.1
+Contact:	Quan Nguyen <quan@os.amperecomputing.com>
+Description:
+		(RO) Contains the 48-byte Ampere (Vendor-Specific) Error Record printed
+		in hex format according to the table below:
+
+		+--------+---------------+-------------+------------------------------------------------------------+
+		| Offset |     Field     | Size (byte) |                     Description                            |
+		+--------+---------------+-------------+------------------------------------------------------------+
+		| 00     | Error Type    | 1           | See :ref:`the table below <smpro-error-types>` for details |
+		+--------+---------------+-------------+------------------------------------------------------------+
+		| 01     | Subtype       | 1           | See :ref:`the table below <smpro-error-types>` for details |
+		+--------+---------------+-------------+------------------------------------------------------------+
+		| 02     | Instance      | 2           | See :ref:`the table below <smpro-error-types>` for details |
+		+--------+---------------+-------------+------------------------------------------------------------+
+		| 04     | Error status  | 4           | See ARM RAS specification for details                      |
+		+--------+---------------+-------------+------------------------------------------------------------+
+		| 08     | Error Address | 8           | See ARM RAS specification for details                      |
+		+--------+---------------+-------------+------------------------------------------------------------+
+		| 16     | Error Misc 0  | 8           | See ARM RAS specification for details                      |
+		+--------+---------------+-------------+------------------------------------------------------------+
+		| 24     | Error Misc 1  | 8           | See ARM RAS specification for details                      |
+		+--------+---------------+-------------+------------------------------------------------------------+
+		| 32     | Error Misc 2  | 8           | See ARM RAS specification for details                      |
+		+--------+---------------+-------------+------------------------------------------------------------+
+		| 40     | Error Misc 3  | 8           | See ARM RAS specification for details                      |
+		+--------+---------------+-------------+------------------------------------------------------------+
+
+		The table below defines the value of error types, their subtype, subcomponent and instance:
+
+		.. _smpro-error-types:
+
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		|   Error Group   | Error Type | Sub type | Sub component  |               Instance                 |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| CPM (core)      | 0          | 0        | Snoop-Logic    | CPM #                                  |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| CPM (core)      | 0          | 2        | Armv8 Core 1   | CPM #                                  |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| MCU (mem)       | 1          | 1        | ERR1           | MCU # \| SLOT << 11                    |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| MCU (mem)       | 1          | 2        | ERR2           | MCU # \| SLOT << 11                    |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| MCU (mem)       | 1          | 3        | ERR3           | MCU #                                  |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| MCU (mem)       | 1          | 4        | ERR4           | MCU #                                  |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| MCU (mem)       | 1          | 5        | ERR5           | MCU #                                  |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| MCU (mem)       | 1          | 6        | ERR6           | MCU #                                  |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| MCU (mem)       | 1          | 7        | Link Error     | MCU #                                  |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| Mesh (other)    | 2          | 0        | Cross Point    | X \| (Y << 5) \| NS <<11               |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| Mesh (other)    | 2          | 1        | Home Node(IO)  | X \| (Y << 5) \| NS <<11               |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| Mesh (other)    | 2          | 2        | Home Node(Mem) | X \| (Y << 5) \| NS <<11 \| device<<12 |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| Mesh (other)    | 2          | 4        | CCIX Node      | X \| (Y << 5) \| NS <<11               |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| 2P Link (other) | 3          | 0        | N/A            | Altra 2P Link #                        |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| GIC (other)     | 5          | 0        | ERR0           | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| GIC (other)     | 5          | 1        | ERR1           | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| GIC (other)     | 5          | 2        | ERR2           | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| GIC (other)     | 5          | 3        | ERR3           | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| GIC (other)     | 5          | 4        | ERR4           | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| GIC (other)     | 5          | 5        | ERR5           | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| GIC (other)     | 5          | 6        | ERR6           | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| GIC (other)     | 5          | 7        | ERR7           | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| GIC (other)     | 5          | 8        | ERR8           | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| GIC (other)     | 5          | 9        | ERR9           | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| GIC (other)     | 5          | 10       | ERR10          | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| GIC (other)     | 5          | 11       | ERR11          | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| GIC (other)     | 5          | 12       | ERR12          | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| GIC (other)     | 5          | 13-21    | ERR13          | RC # + 1                               |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| SMMU (other)    | 6          | TCU      | 100            | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| SMMU (other)    | 6          | TBU0     | 0              | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| SMMU (other)    | 6          | TBU1     | 1              | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| SMMU (other)    | 6          | TBU2     | 2              | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| SMMU (other)    | 6          | TBU3     | 3              | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| SMMU (other)    | 6          | TBU4     | 4              | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| SMMU (other)    | 6          | TBU5     | 5              | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| SMMU (other)    | 6          | TBU6     | 6              | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| SMMU (other)    | 6          | TBU7     | 7              | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| SMMU (other)    | 6          | TBU8     | 8              | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| SMMU (other)    | 6          | TBU9     | 9              | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| PCIe AER (pcie) | 7          | Root     | 0              | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| PCIe AER (pcie) | 7          | Device   | 1              | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| PCIe RC (pcie)  | 8          | RCA HB   | 0              | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| PCIe RC (pcie)  | 8          | RCB HB   | 1              | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| PCIe RC (pcie)  | 8          | RASDP    | 8              | RC #                                   |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| OCM (other)     | 9          | ERR0     | 0              | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| OCM (other)     | 9          | ERR1     | 1              | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| OCM (other)     | 9          | ERR2     | 2              | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| SMpro (other)   | 10         | ERR0     | 0              | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| SMpro (other)   | 10         | ERR1     | 1              | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| SMpro (other)   | 10         | MPA_ERR  | 2              | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| PMpro (other)   | 11         | ERR0     | 0              | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| PMpro (other)   | 11         | ERR1     | 1              | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+		| PMpro (other)   | 11         | MPA_ERR  | 2              | 0                                      |
+		+-----------------+------------+----------+----------------+----------------------------------------+
+
+		Example::
+
+		 # cat error_other_ue
+		 880807001e004010401040101500000001004010401040100c0000000000000000000000000000000000000000000000
+
+		The detail of each sysfs entries is as below:
+
+		+-------------+---------------------------------------------------------+----------------------------------+
+		|   Error     |                   Sysfs entry                           |   Description (when triggered)   |
+		+-------------+---------------------------------------------------------+----------------------------------+
+		| Core's CE   | /sys/bus/platform/devices/smpro-errmon.*/error_core_ce  | Core has CE error                |
+		+-------------+---------------------------------------------------------+----------------------------------+
+		| Core's UE   | /sys/bus/platform/devices/smpro-errmon.*/error_core_ue  | Core has UE error                |
+		+-------------+---------------------------------------------------------+----------------------------------+
+		| Memory's CE | /sys/bus/platform/devices/smpro-errmon.*/error_mem_ce   | Memory has CE error              |
+		+-------------+---------------------------------------------------------+----------------------------------+
+		| Memory's UE | /sys/bus/platform/devices/smpro-errmon.*/error_mem_ue   | Memory has UE error              |
+		+-------------+---------------------------------------------------------+----------------------------------+
+		| PCIe's CE   | /sys/bus/platform/devices/smpro-errmon.*/error_pcie_ce  | any PCIe controller has CE error |
+		+-------------+---------------------------------------------------------+----------------------------------+
+		| PCIe's UE   | /sys/bus/platform/devices/smpro-errmon.*/error_pcie_ue  | any PCIe controller has UE error |
+		+-------------+---------------------------------------------------------+----------------------------------+
+		| Other's CE  | /sys/bus/platform/devices/smpro-errmon.*/error_other_ce | any other CE error               |
+		+-------------+---------------------------------------------------------+----------------------------------+
+		| Other's UE  | /sys/bus/platform/devices/smpro-errmon.*/error_other_ue | any other UE error               |
+		+-------------+---------------------------------------------------------+----------------------------------+
+
+		UE: Uncorrect-able Error
+		CE: Correct-able Error
+
+		For details, see section `3.3 Ampere (Vendor-Specific) Error Record Formats,
+		Altra Family RAS Supplement`.
+
+
+What:		/sys/bus/platform/devices/smpro-errmon.*/overflow_[core|mem|pcie|other]_[ce|ue]
+KernelVersion:	6.1
+Contact:	Quan Nguyen <quan@os.amperecomputing.com>
+Description:
+		(RO) Return the overflow status of each type HW error reported:
+
+		  - 0      : No overflow
+		  - 1      : There is an overflow and the oldest HW errors are dropped
+
+		The detail of each sysfs entries is as below:
+
+		+-------------+-----------------------------------------------------------+---------------------------------------+
+		|   Overflow  |                   Sysfs entry                             |             Description               |
+		+-------------+-----------------------------------------------------------+---------------------------------------+
+		| Core's CE   | /sys/bus/platform/devices/smpro-errmon.*/overflow_core_ce | Core CE error overflow                |
+		+-------------+-----------------------------------------------------------+---------------------------------------+
+		| Core's UE   | /sys/bus/platform/devices/smpro-errmon.*/overflow_core_ue | Core UE error overflow                |
+		+-------------+-----------------------------------------------------------+---------------------------------------+
+		| Memory's CE | /sys/bus/platform/devices/smpro-errmon.*/overflow_mem_ce  | Memory CE error overflow              |
+		+-------------+-----------------------------------------------------------+---------------------------------------+
+		| Memory's UE | /sys/bus/platform/devices/smpro-errmon.*/overflow_mem_ue  | Memory UE error overflow              |
+		+-------------+-----------------------------------------------------------+---------------------------------------+
+		| PCIe's CE   | /sys/bus/platform/devices/smpro-errmon.*/overflow_pcie_ce | any PCIe controller CE error overflow |
+		+-------------+-----------------------------------------------------------+---------------------------------------+
+		| PCIe's UE   | /sys/bus/platform/devices/smpro-errmon.*/overflow_pcie_ue | any PCIe controller UE error overflow |
+		+-------------+-----------------------------------------------------------+---------------------------------------+
+		| Other's CE  | /sys/bus/platform/devices/smpro-errmon.*/overflow_other_ce| any other CE error overflow           |
+		+-------------+-----------------------------------------------------------+---------------------------------------+
+		| Other's UE  | /sys/bus/platform/devices/smpro-errmon.*/overflow_other_ue| other UE error overflow               |
+		+-------------+-----------------------------------------------------------+---------------------------------------+
+
+		where:
+
+		  - UE: Uncorrect-able Error
+		  - CE: Correct-able Error
+
+What:		/sys/bus/platform/devices/smpro-errmon.*/[error|warn]_[smpro|pmpro]
+KernelVersion:	6.1
+Contact:	Quan Nguyen <quan@os.amperecomputing.com>
+Description:
+		(RO) Contains the internal firmware error/warning printed as hex format.
+
+		The detail of each sysfs entries is as below:
+
+		+---------------+------------------------------------------------------+--------------------------+
+		|   Error       |                   Sysfs entry                        |        Description       |
+		+---------------+------------------------------------------------------+--------------------------+
+		| SMpro error   | /sys/bus/platform/devices/smpro-errmon.*/error_smpro | system has SMpro error   |
+		+---------------+------------------------------------------------------+--------------------------+
+		| SMpro warning | /sys/bus/platform/devices/smpro-errmon.*/warn_smpro  | system has SMpro warning |
+		+---------------+------------------------------------------------------+--------------------------+
+		| PMpro error   | /sys/bus/platform/devices/smpro-errmon.*/error_pmpro | system has PMpro error   |
+		+---------------+------------------------------------------------------+--------------------------+
+		| PMpro warning | /sys/bus/platform/devices/smpro-errmon.*/warn_pmpro  | system has PMpro warning |
+		+---------------+------------------------------------------------------+--------------------------+
+
+		For details, see section `5.10 RAS Internal Error Register Definitions,
+		Altra Family Soc BMC Interface Specification`.
+
+What:		/sys/bus/platform/devices/smpro-errmon.*/event_[vrd_warn_fault|vrd_hot|dimm_hot|dimm_2x_refresh]
+KernelVersion:	6.1 (event_[vrd_warn_fault|vrd_hot|dimm_hot]), 6.4 (event_dimm_2x_refresh)
+Contact:	Quan Nguyen <quan@os.amperecomputing.com>
+Description:
+		(RO) Contains the detail information in case of VRD/DIMM warning/hot events
+		in hex format as below::
+
+		    AAAA
+
+		where:
+
+		  - ``AAAA``: The event detail information data
+
+		The detail of each sysfs entries is as below:
+
+		+---------------+---------------------------------------------------------------+---------------------+
+		|   Event       |                        Sysfs entry                            |     Description     |
+		+---------------+---------------------------------------------------------------+---------------------+
+		| VRD HOT       | /sys/bus/platform/devices/smpro-errmon.*/event_vrd_hot        | VRD Hot             |
+		+---------------+---------------------------------------------------------------+---------------------+
+		| VR Warn/Fault | /sys/bus/platform/devices/smpro-errmon.*/event_vrd_warn_fault | VR Warning or Fault |
+		+---------------+---------------------------------------------------------------+---------------------+
+		| DIMM HOT      | /sys/bus/platform/devices/smpro-errmon.*/event_dimm_hot       | DIMM Hot            |
+		+---------------+---------------------------------------------------------------+---------------------+
+		| DIMM 2X       | /sys/bus/platform/devices/smpro-errmon.*/event_dimm_2x_refresh| DIMM 2x refresh rate|
+		| REFRESH RATE  |                                                               | event in high temp  |
+		+---------------+---------------------------------------------------------------+---------------------+
+
+		For more details, see section `5.7 GPI Status Registers and 5.9 Memory Error Register Definitions,
+		Altra Family Soc BMC Interface Specification`.
+
+What:		/sys/bus/platform/devices/smpro-errmon.*/event_dimm[0-15]_syndrome
+KernelVersion:	6.4
+Contact:	Quan Nguyen <quan@os.amperecomputing.com>
+Description:
+		(RO) The sysfs returns the 2-byte DIMM failure syndrome data for slot
+		0-15 if it failed to initialize.
+
+		For more details, see section `5.11 Boot Stage Register Definitions,
+		Altra Family Soc BMC Interface Specification`.
+
+What:		/sys/bus/platform/devices/smpro-misc.*/boot_progress
+KernelVersion:	6.1
+Contact:	Quan Nguyen <quan@os.amperecomputing.com>
+Description:
+		(RO) Contains the boot stages information in hex as format below::
+
+		    AABBCCCCCCCC
+
+		where:
+
+		  - ``AA``      : The boot stages
+
+		    - 00: SMpro firmware booting
+		    - 01: PMpro firmware booting
+		    - 02: ATF BL1 firmware booting
+		    - 03: DDR initialization
+		    - 04: DDR training report status
+		    - 05: ATF BL2 firmware booting
+		    - 06: ATF BL31 firmware booting
+		    - 07: ATF BL32 firmware booting
+		    - 08: UEFI firmware booting
+		    - 09: OS booting
+
+		  - ``BB``      : Boot status
+
+		    - 00: Not started
+		    - 01: Started
+		    - 02: Completed without error
+		    - 03: Failed.
+
+		  - ``CCCCCCCC``: Boot status information defined for each boot stages
+
+		For details, see section `5.11 Boot Stage Register Definitions`
+		and section `6. Processor Boot Progress Codes, Altra Family Soc BMC
+		Interface Specification`.
+
+
+What:		/sys/bus/platform/devices/smpro-misc*/soc_power_limit
+KernelVersion:	6.1
+Contact:	Quan Nguyen <quan@os.amperecomputing.com>
+Description:
+		(RW) Contains the desired SoC power limit in Watt.
+		Writes to this sysfs set the desired SoC power limit (W).
+		Reads from this register return the current SoC power limit (W).
+		The value ranges:
+
+		  - Minimum: 120 W
+		  - Maximum: Socket TDP power
diff --git a/Documentation/ABI/testing/sysfs-bus-platform-devices-occ-hwmon b/Documentation/ABI/testing/sysfs-bus-platform-devices-occ-hwmon
new file mode 100644
index 000000000000..b24d7ab0278f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-platform-devices-occ-hwmon
@@ -0,0 +1,13 @@
+What:		/sys/bus/platform/devices/occ-hwmon.X/ffdc
+KernelVersion:	5.15
+Contact:	eajames@linux.ibm.com
+Description:
+		Contains the First Failure Data Capture from the SBEFIFO
+		hardware, if there is any from a previous transfer. Otherwise,
+		the file is empty. The data is cleared when it's been
+		completely read by a user. As the name suggests, only the data
+		from the first error is saved, until it's cleared upon read. The OCC hwmon driver, running on
+		a Baseboard Management Controller (BMC), communicates with
+		POWER9 and up processors over the Self-Boot Engine (SBE) FIFO.
+		In many error conditions, the SBEFIFO will return error data
+		indicating the type of error and system state, etc.
diff --git a/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub b/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub
new file mode 100644
index 000000000000..42deb0552065
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub
@@ -0,0 +1,8 @@
+What:		/sys/bus/platform/devices/<dev>/always_powered_in_suspend
+Date:		June 2022
+KernelVersion:	5.20
+Contact:	Matthias Kaehlcke <matthias@kaehlcke.net>
+		linux-usb@vger.kernel.org
+Description:
+		(RW) Controls whether the USB hub remains always powered
+		during system suspend or not.
+\ No newline at end of file
diff --git a/Documentation/ABI/testing/sysfs-bus-rapidio b/Documentation/ABI/testing/sysfs-bus-rapidio
index 634ea207a50a..f8b6728dac10 100644
--- a/Documentation/ABI/testing/sysfs-bus-rapidio
+++ b/Documentation/ABI/testing/sysfs-bus-rapidio
@@ -1,4 +1,4 @@
-What:		/sys/bus/rapidio/devices/nn:d:iiii
+What:		/sys/bus/rapidio/devices/<nn>:<d>:<iiii>
 Description:
 		For each RapidIO device, the RapidIO subsystem creates files in
 		an individual subdirectory with the following name format of
@@ -29,7 +29,7 @@ Description:
 Attributes Common for All RapidIO Devices
 -----------------------------------------
 
-What:		/sys/bus/rapidio/devices/nn:d:iiii/did
+What:		/sys/bus/rapidio/devices/<nn>:<d>:<iiii>/did
 Date:		Nov, 2005
 KernelVersion:	v2.6.15
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
@@ -37,7 +37,7 @@ Contact:	Matt Porter <mporter@kernel.crashing.org>,
 Description:
 		(RO) returns the device identifier
 
-What:		/sys/bus/rapidio/devices/nn:d:iiii/vid
+What:		/sys/bus/rapidio/devices/<nn>:<d>:<iiii>/vid
 Date:		Nov, 2005
 KernelVersion:	v2.6.15
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
@@ -45,7 +45,7 @@ Contact:	Matt Porter <mporter@kernel.crashing.org>,
 Description:
 		(RO) returns the device vendor identifier
 
-What:		/sys/bus/rapidio/devices/nn:d:iiii/device_rev
+What:		/sys/bus/rapidio/devices/<nn>:<d>:<iiii>/device_rev
 Date:		Nov, 2005
 KernelVersion:	v2.6.15
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
@@ -53,7 +53,7 @@ Contact:	Matt Porter <mporter@kernel.crashing.org>,
 Description:
 		(RO) returns the device revision level
 
-What:		/sys/bus/rapidio/devices/nn:d:iiii/asm_did
+What:		/sys/bus/rapidio/devices/<nn>:<d>:<iiii>/asm_did
 Date:		Nov, 2005
 KernelVersion:	v2.6.15
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
@@ -61,7 +61,7 @@ Contact:	Matt Porter <mporter@kernel.crashing.org>,
 Description:
 		(RO) returns identifier for the assembly containing the device
 
-What:		/sys/bus/rapidio/devices/nn:d:iiii/asm_rev
+What:		/sys/bus/rapidio/devices/<nn>:<d>:<iiii>/asm_rev
 Date:		Nov, 2005
 KernelVersion:	v2.6.15
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
@@ -70,7 +70,7 @@ Description:
 		(RO) returns revision level of the assembly containing the
 		device
 
-What:		/sys/bus/rapidio/devices/nn:d:iiii/asm_vid
+What:		/sys/bus/rapidio/devices/<nn>:<d>:<iiii>/asm_vid
 Date:		Nov, 2005
 KernelVersion:	v2.6.15
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
@@ -79,7 +79,7 @@ Description:
 		(RO) returns vendor identifier of the assembly containing the
 		device
 
-What:		/sys/bus/rapidio/devices/nn:d:iiii/destid
+What:		/sys/bus/rapidio/devices/<nn>:<d>:<iiii>/destid
 Date:		Mar, 2011
 KernelVersion:	v2.6.3
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
@@ -88,7 +88,7 @@ Description:
 		(RO) returns device destination ID assigned by the enumeration
 		routine
 
-What:		/sys/bus/rapidio/devices/nn:d:iiii/lprev
+What:		/sys/bus/rapidio/devices/<nn>:<d>:<iiii>/lprev
 Date:		Mar, 2011
 KernelVersion:	v2.6.39
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
@@ -97,7 +97,7 @@ Description:
 		(RO) returns name of previous device (switch) on the path to the
 		device that that owns this attribute
 
-What:		/sys/bus/rapidio/devices/nn:d:iiii/modalias
+What:		/sys/bus/rapidio/devices/<nn>:<d>:<iiii>/modalias
 Date:		Jul, 2013
 KernelVersion:	v3.11
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
@@ -105,7 +105,7 @@ Contact:	Matt Porter <mporter@kernel.crashing.org>,
 Description:
 		(RO) returns the device modalias
 
-What:		/sys/bus/rapidio/devices/nn:d:iiii/config
+What:		/sys/bus/rapidio/devices/<nn>:<d>:<iiii>/config
 Date:		Nov, 2005
 KernelVersion:	v2.6.15
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
@@ -128,7 +128,7 @@ device-specific sysfs attributes by specifying a callback function that may be
 set by the switch initialization routine during enumeration or discovery
 process.
 
-What:		/sys/bus/rapidio/devices/nn:s:iiii/routes
+What:		/sys/bus/rapidio/devices/<nn>:<s>:<iiii>/routes
 Date:		Nov, 2005
 KernelVersion:	v2.6.15
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
@@ -138,7 +138,7 @@ Description:
 		This attribute reports only valid routing table entries, one
 		line for each entry.
 
-What:		/sys/bus/rapidio/devices/nn:s:iiii/destid
+What:		/sys/bus/rapidio/devices/<nn>:<s>:<iiii>/destid
 Date:		Mar, 2011
 KernelVersion:	v2.6.3
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
@@ -147,7 +147,7 @@ Description:
 		(RO) device destination ID of the associated device that defines
 		a route to the switch
 
-What:		/sys/bus/rapidio/devices/nn:s:iiii/hopcount
+What:		/sys/bus/rapidio/devices/<nn>:<s>:<iiii>/hopcount
 Date:		Mar, 2011
 KernelVersion:	v2.6.39
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
@@ -155,7 +155,7 @@ Contact:	Matt Porter <mporter@kernel.crashing.org>,
 Description:
 		(RO) number of hops on the path to the switch
 
-What:		/sys/bus/rapidio/devices/nn:s:iiii/lnext
+What:		/sys/bus/rapidio/devices/<nn>:<s>:<iiii>/lnext
 Date:		Mar, 2011
 KernelVersion:	v2.6.39
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
@@ -172,7 +172,7 @@ Device-specific Switch Attributes
 
 IDT_GEN2-
 
-What:		/sys/bus/rapidio/devices/nn:s:iiii/errlog
+What:		/sys/bus/rapidio/devices/<nn>:<s>:<iiii>/errlog
 Date:		Oct, 2010
 KernelVersion:	v2.6.37
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
diff --git a/Documentation/ABI/testing/sysfs-bus-soundwire-master b/Documentation/ABI/testing/sysfs-bus-soundwire-master
index 46ef038d8722..d2342911ffbb 100644
--- a/Documentation/ABI/testing/sysfs-bus-soundwire-master
+++ b/Documentation/ABI/testing/sysfs-bus-soundwire-master
@@ -1,13 +1,13 @@
-What:		/sys/bus/soundwire/devices/sdw-master-N/revision
-		/sys/bus/soundwire/devices/sdw-master-N/clk_stop_modes
-		/sys/bus/soundwire/devices/sdw-master-N/clk_freq
-		/sys/bus/soundwire/devices/sdw-master-N/clk_gears
-		/sys/bus/soundwire/devices/sdw-master-N/default_col
-		/sys/bus/soundwire/devices/sdw-master-N/default_frame_rate
-		/sys/bus/soundwire/devices/sdw-master-N/default_row
-		/sys/bus/soundwire/devices/sdw-master-N/dynamic_shape
-		/sys/bus/soundwire/devices/sdw-master-N/err_threshold
-		/sys/bus/soundwire/devices/sdw-master-N/max_clk_freq
+What:		/sys/bus/soundwire/devices/sdw-master-<N>/revision
+		/sys/bus/soundwire/devices/sdw-master-<N>/clk_stop_modes
+		/sys/bus/soundwire/devices/sdw-master-<N>/clk_freq
+		/sys/bus/soundwire/devices/sdw-master-<N>/clk_gears
+		/sys/bus/soundwire/devices/sdw-master-<N>/default_col
+		/sys/bus/soundwire/devices/sdw-master-<N>/default_frame_rate
+		/sys/bus/soundwire/devices/sdw-master-<N>/default_row
+		/sys/bus/soundwire/devices/sdw-master-<N>/dynamic_shape
+		/sys/bus/soundwire/devices/sdw-master-<N>/err_threshold
+		/sys/bus/soundwire/devices/sdw-master-<N>/max_clk_freq
 
 Date:		April 2020
 
diff --git a/Documentation/ABI/testing/sysfs-bus-soundwire-slave b/Documentation/ABI/testing/sysfs-bus-soundwire-slave
index d324aa0b678f..fbf55834dfee 100644
--- a/Documentation/ABI/testing/sysfs-bus-soundwire-slave
+++ b/Documentation/ABI/testing/sysfs-bus-soundwire-slave
@@ -64,37 +64,37 @@ Description:	SoundWire Slave Data Port-0 DisCo properties.
 		Data port 0 are used by the bus to configure the Data Port 0.
 
 
-What:		/sys/bus/soundwire/devices/sdw:.../dpN_src/max_word
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/min_word
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/words
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/type
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/max_grouping
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/simple_ch_prep_sm
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/ch_prep_timeout
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/imp_def_interrupts
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/min_ch
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/max_ch
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/channels
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/ch_combinations
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/max_async_buffer
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/block_pack_mode
-		/sys/bus/soundwire/devices/sdw:.../dpN_src/port_encoding
-
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/max_word
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/min_word
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/words
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/type
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/max_grouping
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/simple_ch_prep_sm
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/ch_prep_timeout
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/imp_def_interrupts
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/min_ch
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/max_ch
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/channels
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/ch_combinations
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/max_async_buffer
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/block_pack_mode
-		/sys/bus/soundwire/devices/sdw:.../dpN_sink/port_encoding
+What:		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/max_word
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/min_word
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/words
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/type
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/max_grouping
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/simple_ch_prep_sm
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/ch_prep_timeout
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/imp_def_interrupts
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/min_ch
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/max_ch
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/channels
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/ch_combinations
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/max_async_buffer
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/block_pack_mode
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_src/port_encoding
+
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/max_word
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/min_word
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/words
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/type
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/max_grouping
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/simple_ch_prep_sm
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/ch_prep_timeout
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/imp_def_interrupts
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/min_ch
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/max_ch
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/channels
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/ch_combinations
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/max_async_buffer
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/block_pack_mode
+		/sys/bus/soundwire/devices/sdw:.../dp<N>_sink/port_encoding
 
 Date:		May 2020
 
diff --git a/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor b/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
index d76cd3946434..c800621eff95 100644
--- a/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
+++ b/Documentation/ABI/testing/sysfs-bus-spi-devices-spi-nor
@@ -5,6 +5,9 @@ Contact:	linux-mtd@lists.infradead.org
 Description:	(RO) The JEDEC ID of the SPI NOR flash as reported by the
 		flash device.
 
+		The attribute is not present if the flash doesn't support
+		the "Read JEDEC ID" command (9Fh). This is the case for
+		non-JEDEC compliant flashes.
 
 What:		/sys/bus/spi/devices/.../spi-nor/manufacturer
 Date:		April 2021
@@ -12,6 +15,9 @@ KernelVersion:	5.14
 Contact:	linux-mtd@lists.infradead.org
 Description:	(RO) Manufacturer of the SPI NOR flash.
 
+		The attribute is not present if the flash device isn't
+		known to the kernel and is only probed by its SFDP
+		tables.
 
 What:		/sys/bus/spi/devices/.../spi-nor/partname
 Date:		April 2021
diff --git a/Documentation/ABI/testing/sysfs-bus-surface_aggregator-tabletsw b/Documentation/ABI/testing/sysfs-bus-surface_aggregator-tabletsw
new file mode 100644
index 000000000000..74cd9d754e60
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-surface_aggregator-tabletsw
@@ -0,0 +1,57 @@
+What:		/sys/bus/surface_aggregator/devices/01:0e:01:00:01/state
+Date:		July 2022
+KernelVersion:	5.20
+Contact:	Maximilian Luz <luzmaximilian@gmail.com>
+Description:
+		This attribute returns a string with the current type-cover
+		or device posture, as indicated by the embedded controller.
+		Currently returned posture states are:
+
+		- "disconnected": The type-cover has been disconnected.
+
+		- "closed": The type-cover has been folded closed and lies on
+		  top of the display.
+
+		- "laptop": The type-cover is open and in laptop-mode, i.e.,
+		  ready for normal use.
+
+		- "folded-canvas": The type-cover has been folded back
+		  part-ways, but does not lie flush with the back side of the
+		  device. In general, this means that the kick-stand is used
+		  and extended atop of the cover.
+
+		- "folded-back": The type cover has been fully folded back and
+		  lies flush with the back side of the device.
+
+		- "<unknown>": The current state is unknown to the driver, for
+		  example due to newer as-of-yet unsupported hardware.
+
+		New states may be introduced with new hardware. Users therefore
+		must not rely on this list of states being exhaustive and
+		gracefully handle unknown states.
+
+What:		/sys/bus/surface_aggregator/devices/01:26:01:00:01/state
+Date:		July 2022
+KernelVersion:	5.20
+Contact:	Maximilian Luz <luzmaximilian@gmail.com>
+Description:
+		This attribute returns a string with the current device posture, as indicated by the embedded controller. Currently
+		returned posture states are:
+
+		- "closed": The lid of the device is closed.
+
+		- "laptop": The lid of the device is opened and the device
+		  operates as a normal laptop.
+
+		- "slate": The screen covers the keyboard or has been flipped
+		  back and the device operates mainly based on touch input.
+
+		- "tablet": The device operates as tablet and exclusively
+		  relies on touch input (or external peripherals).
+
+		- "<unknown>": The current state is unknown to the driver, for
+		  example due to newer as-of-yet unsupported hardware.
+
+		New states may be introduced with new hardware. Users therefore
+		must not rely on this list of states being exhaustive and
+		gracefully handle unknown states.
diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt
index b7e87f6c7d47..76ab3e1fe374 100644
--- a/Documentation/ABI/testing/sysfs-bus-thunderbolt
+++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt
@@ -153,7 +153,7 @@ Date:		Jan 2020
 KernelVersion:	5.5
 Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
 Description:	This attribute reports number of RX lanes the device is
-		using simultaneusly through its upstream port.
+		using simultaneously through its upstream port.
 
 What:		/sys/bus/thunderbolt/devices/.../tx_speed
 Date:		Jan 2020
@@ -167,7 +167,7 @@ Date:		Jan 2020
 KernelVersion:	5.5
 Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
 Description:	This attribute reports number of TX lanes the device is
-		using simultaneusly through its upstream port.
+		using simultaneously through its upstream port.
 
 What:		/sys/bus/thunderbolt/devices/.../vendor
 Date:		Sep 2017
@@ -293,6 +293,16 @@ Contact:	thunderbolt-software@lists.01.org
 Description:	This contains XDomain service specific settings as
 		bitmask. Format: %x
 
+What:		/sys/bus/thunderbolt/devices/usb4_portX/connector
+Date:		April 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Symlink to the USB Type-C connector. This link is only
+		created when USB Type-C Connector Class is enabled,
+		and only if the system firmware is capable of
+		describing the connection between a port and its
+		connector.
+
 What:		/sys/bus/thunderbolt/devices/usb4_portX/link
 Date:		Sep 2021
 KernelVersion:	v5.14
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb
index 73eb23bc1f34..cb172db41b34 100644
--- a/Documentation/ABI/testing/sysfs-bus-usb
+++ b/Documentation/ABI/testing/sysfs-bus-usb
@@ -1,4 +1,4 @@
-What:		/sys/bus/usb/devices/INTERFACE/authorized
+What:		/sys/bus/usb/devices/<INTERFACE>/authorized
 Date:		August 2015
 Description:
 		This allows to authorize (1) or deauthorize (0)
@@ -166,14 +166,31 @@ Description:
 		The file will be present for all speeds of USB devices, and will
 		always read "no" for USB 1.1 and USB 2.0 devices.
 
-What:		/sys/bus/usb/devices/.../(hub interface)/portX
+What:		/sys/bus/usb/devices/<INTERFACE>/wireless_status
+Date:		February 2023
+Contact:	Bastien Nocera <hadess@hadess.net>
+Description:
+		Some USB devices use a USB receiver dongle to communicate
+		wirelessly with their device using proprietary protocols. This
+		attribute allows user-space to know whether the device is
+		connected to its receiver dongle, and, for example, consider
+		the device to be absent when choosing whether to show the
+		device's battery, show a headset in a list of outputs, or show
+		an on-screen keyboard if the only wireless keyboard is
+		turned off.
+		This attribute is not to be used to replace protocol specific
+		statuses available in WWAN, WLAN/Wi-Fi, Bluetooth, etc.
+		If the device does not use a receiver dongle with a wireless
+		device, then this attribute will not exist.
+
+What:		/sys/bus/usb/devices/.../<hub_interface>/port<X>
 Date:		August 2012
 Contact:	Lan Tianyu <tianyu.lan@intel.com>
 Description:
-		The /sys/bus/usb/devices/.../(hub interface)/portX
+		The /sys/bus/usb/devices/.../<hub_interface>/port<X>
 		is usb port device's sysfs directory.
 
-What:		/sys/bus/usb/devices/.../(hub interface)/portX/connect_type
+What:		/sys/bus/usb/devices/.../<hub_interface>/port<X>/connect_type
 Date:		January 2013
 Contact:	Lan Tianyu <tianyu.lan@intel.com>
 Description:
@@ -182,7 +199,7 @@ Description:
 		The file will read "hotplug", "hardwired" and "not used" if the
 		information is available, and "unknown" otherwise.
 
-What:		/sys/bus/usb/devices/.../(hub interface)/portX/location
+What:		/sys/bus/usb/devices/.../<hub_interface>/port<X>/location
 Date:		October 2018
 Contact:	Bjørn Mork <bjorn@mork.no>
 Description:
@@ -192,7 +209,7 @@ Description:
 		raw location value as a hex integer.
 
 
-What:		/sys/bus/usb/devices/.../(hub interface)/portX/quirks
+What:		/sys/bus/usb/devices/.../<hub_interface>/port<X>/quirks
 Date:		May 2018
 Contact:	Nicolas Boichat <drinkcat@chromium.org>
 Description:
@@ -216,7 +233,7 @@ Description:
 		   used to help make enumeration work better on some high speed
 		   devices.
 
-What:		/sys/bus/usb/devices/.../(hub interface)/portX/over_current_count
+What:		/sys/bus/usb/devices/.../<hub_interface>/port<X>/over_current_count
 Date:		February 2018
 Contact:	Richard Leitner <richard.leitner@skidata.com>
 Description:
@@ -230,10 +247,10 @@ Description:
 		Any time this value changes the corresponding hub device will send a
 		udev event with the following attributes::
 
-		  OVER_CURRENT_PORT=/sys/bus/usb/devices/.../(hub interface)/portX
+		  OVER_CURRENT_PORT=/sys/bus/usb/devices/.../<hub_interface>/port<X>
 		  OVER_CURRENT_COUNT=[current value of this sysfs attribute]
 
-What:		/sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit
+What:		/sys/bus/usb/devices/.../<hub_interface>/port<X>/usb3_lpm_permit
 Date:		November 2015
 Contact:	Lu Baolu <baolu.lu@linux.intel.com>
 Description:
@@ -244,6 +261,37 @@ Description:
 		is permitted, "u2" if only u2 is permitted, "u1_u2" if both u1 and
 		u2 are permitted.
 
+What:		/sys/bus/usb/devices/.../<hub_interface>/port<X>/connector
+Date:		December 2021
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Link to the USB Type-C connector when available. This link is
+		only created when USB Type-C Connector Class is enabled, and
+		only if the system firmware is capable of describing the
+		connection between a port and its connector.
+
+What:		/sys/bus/usb/devices/.../<hub_interface>/port<X>/disable
+Date:		June 2022
+Contact:	Michael Grzeschik <m.grzeschik@pengutronix.de>
+Description:
+		This file controls the state of a USB port, including
+		Vbus power output (but only on hubs that support
+		power switching -- most hubs don't support it). If
+		a port is disabled, the port is unusable: Devices
+		attached to the port will not be detected, initialized,
+		or enumerated.
+
+What:		/sys/bus/usb/devices/.../<hub_interface>/port<X>/early_stop
+Date:		Sep 2022
+Contact:	Ray Chi <raychi@google.com>
+Description:
+		Some USB hosts have some watchdog mechanisms so that the device
+		may enter ramdump if it takes a long time during port initialization.
+		This attribute allows each port just has two attempts so that the
+		port initialization will be failed quickly. In addition, if a port
+		which is marked with early_stop has failed to initialize, it will ignore
+		all future connections until this attribute is clear.
+
 What:		/sys/bus/usb/devices/.../power/usb2_lpm_l1_timeout
 Date:		May 2013
 Contact:	Mathias Nyman <mathias.nyman@linux.intel.com>
@@ -288,3 +336,277 @@ Description:
 		USB 3.2 adds Dual-lane support, 2 rx and 2 tx -lanes over Type-C.
 		Inter-Chip SSIC devices support asymmetric lanes up to 4 lanes per
 		direction. Devices before USB 3.2 are single lane (tx_lanes = 1)
+
+What:		/sys/bus/usb/devices/usbX/bAlternateSetting
+Description:
+		The current interface alternate setting number, in decimal.
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/bcdDevice
+Description:
+		The device's release number, in hexadecimal.
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/bConfigurationValue
+Description:
+		While a USB device typically have just one configuration
+		setting, some devices support multiple configurations.
+
+		This value shows the current configuration, in decimal.
+
+		Changing its value will change the device's configuration
+		to another setting.
+
+		The number of configurations supported by a device is at:
+
+			/sys/bus/usb/devices/usbX/bNumConfigurations
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/bDeviceClass
+Description:
+		Class code of the device, in hexadecimal.
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/bDeviceProtocol
+Description:
+		Protocol code of the device, in hexadecimal.
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/bDeviceSubClass
+Description:
+		Subclass code of the device, in hexadecimal.
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/bInterfaceClass
+Description:
+		Class code of the interface, in hexadecimal.
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/bInterfaceNumber
+Description:
+		Interface number, in hexadecimal.
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/bInterfaceProtocol
+Description:
+		Protocol code of the interface, in hexadecimal.
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/bInterfaceSubClass
+Description:
+		Subclass code of the interface, in hexadecimal.
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/bmAttributes
+Description:
+		Attributes of the current configuration, in hexadecimal.
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/bMaxPacketSize0
+Description:
+		Maximum endpoint 0 packet size, in decimal.
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/bMaxPower
+Description:
+		Maximum power consumption of the active configuration of
+		the device, in miliamperes.
+
+What:		/sys/bus/usb/devices/usbX/bNumConfigurations
+Description:
+		Number of the possible configurations of the device, in
+		decimal. The current configuration is controlled via:
+
+			/sys/bus/usb/devices/usbX/bConfigurationValue
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/bNumEndpoints
+Description:
+		Number of endpoints used on this interface, in hexadecimal.
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/bNumInterfaces
+Description:
+		Number of interfaces on this device, in decimal.
+
+What:		/sys/bus/usb/devices/usbX/busnum
+Description:
+		Number of the bus.
+
+What:		/sys/bus/usb/devices/usbX/configuration
+Description:
+		Contents of the string descriptor associated with the
+		current configuration. It may include the firmware version
+		of a device and/or its serial number.
+
+What:		/sys/bus/usb/devices/usbX/descriptors
+Description:
+		Contains the interface descriptors, in binary.
+
+What:		/sys/bus/usb/devices/usbX/idProduct
+Description:
+		Product ID, in hexadecimal.
+
+What:		/sys/bus/usb/devices/usbX/idVendor
+Description:
+		Vendor ID, in hexadecimal.
+
+What:		/sys/bus/usb/devices/usbX/devspec
+Description:
+		Displays the Device Tree Open Firmware node of the interface.
+
+What:		/sys/bus/usb/devices/usbX/avoid_reset_quirk
+Description:
+		Most devices have this set to zero.
+
+		If the value is 1, enable a USB quirk that prevents this
+		device to use reset.
+
+		(read/write)
+
+What:		/sys/bus/usb/devices/usbX/devnum
+Description:
+		USB interface device number, in decimal.
+
+What:		/sys/bus/usb/devices/usbX/devpath
+Description:
+		String containing the USB interface device path.
+
+What:		/sys/bus/usb/devices/usbX/manufacturer
+Description:
+		Vendor specific string containing the name of the
+		manufacturer of the device.
+
+What:		/sys/bus/usb/devices/usbX/maxchild
+Description:
+		Number of ports of an USB hub
+
+What:		/sys/bus/usb/devices/usbX/persist
+Description:
+		Keeps the device even if it gets disconnected.
+
+What:		/sys/bus/usb/devices/usbX/product
+Description:
+		Vendor specific string containing the name of the
+		device's product.
+
+What:		/sys/bus/usb/devices/usbX/speed
+Description:
+		Shows the device's max speed, according to the USB version,
+		in Mbps.
+		Can be:
+
+			=======		====================
+			Unknown		speed unknown
+			1.5		Low speed
+			15		Full speed
+			480		High Speed
+			5000		Super Speed
+			10000		Super Speed+
+			20000		Super Speed+ Gen 2x2
+			=======		====================
+
+What:		/sys/bus/usb/devices/usbX/supports_autosuspend
+Description:
+		Returns 1 if the device doesn't support autosuspend.
+		Otherwise, returns 0.
+
+What:		/sys/bus/usb/devices/usbX/urbnum
+Description:
+		Number of URBs submitted for the whole device.
+
+What:		/sys/bus/usb/devices/usbX/version
+Description:
+		String containing the USB device version, as encoded
+		at the BCD descriptor.
+
+What:		/sys/bus/usb/devices/usbX/power/autosuspend
+Description:
+		Time in milliseconds for the device to autosuspend. If the
+		value is negative, then autosuspend is prevented.
+
+		(read/write)
+
+What:		/sys/bus/usb/devices/usbX/power/active_duration
+Description:
+		The total time the device has not been suspended.
+
+What:		/sys/bus/usb/devices/usbX/power/connected_duration
+Description:
+		The total time (in msec) that the device has been connected.
+
+What:		/sys/bus/usb/devices/usbX/power/level
+Description:
+
+What:		/sys/bus/usb/devices/usbX/ep_<N>/bEndpointAddress
+Description:
+		The address of the endpoint described by this descriptor,
+		in hexadecimal. The endpoint direction on this bitmapped field
+		is also shown at:
+
+			/sys/bus/usb/devices/usbX/ep_<N>/direction
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/ep_<N>/bInterval
+Description:
+		The interval of the endpoint as described on its descriptor,
+		in hexadecimal. The actual interval depends on the version
+		of the USB. Also shown in time units at
+		/sys/bus/usb/devices/usbX/ep_<N>/interval.
+
+What:		/sys/bus/usb/devices/usbX/ep_<N>/bLength
+Description:
+		Number of bytes of the endpoint descriptor, in hexadecimal.
+
+What:		/sys/bus/usb/devices/usbX/ep_<N>/bmAttributes
+Description:
+		Attributes which apply to the endpoint as described on its
+		descriptor, in hexadecimal. The endpoint type on this
+		bitmapped field is also shown at:
+
+			/sys/bus/usb/devices/usbX/ep_<N>/type
+
+		See USB specs for its meaning.
+
+What:		/sys/bus/usb/devices/usbX/ep_<N>/direction
+Description:
+		Direction of the endpoint. Can be:
+
+		    - both (on control endpoints)
+		    - in
+		    - out
+
+What:		/sys/bus/usb/devices/usbX/ep_<N>/interval
+Description:
+		Interval for polling endpoint for data transfers, in
+		milisseconds or microseconds.
+
+What:		/sys/bus/usb/devices/usbX/ep_<N>/type
+Description:
+		Descriptor type. Can be:
+
+		    - Control
+		    - Isoc
+		    - Bulk
+		    - Interrupt
+		    - unknown
+
+What:		/sys/bus/usb/devices/usbX/ep_<N>/wMaxPacketSize
+Description:
+		Maximum packet size this endpoint is capable of
+		sending or receiving, in hexadecimal.
diff --git a/Documentation/ABI/testing/sysfs-bus-vdpa b/Documentation/ABI/testing/sysfs-bus-vdpa
new file mode 100644
index 000000000000..28a6111202ba
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-vdpa
@@ -0,0 +1,57 @@
+What:		/sys/bus/vdpa/driver_autoprobe
+Date:		March 2020
+Contact:	virtualization@lists.linux-foundation.org
+Description:
+		This file determines whether new devices are immediately bound
+		to a driver after the creation. It initially contains 1, which
+		means the kernel automatically binds devices to a compatible
+		driver immediately after they are created.
+
+		Writing "0" to this file disable this feature, any other string
+		enable it.
+
+What:		/sys/bus/vdpa/driver_probe
+Date:		March 2020
+Contact:	virtualization@lists.linux-foundation.org
+Description:
+		Writing a device name to this file will cause the kernel binds
+		devices to a compatible driver.
+
+		This can be useful when /sys/bus/vdpa/driver_autoprobe is
+		disabled.
+
+What:		/sys/bus/vdpa/drivers/.../bind
+Date:		March 2020
+Contact:	virtualization@lists.linux-foundation.org
+Description:
+		Writing a device name to this file will cause the driver to
+		attempt to bind to the device. This is useful for overriding
+		default bindings.
+
+What:		/sys/bus/vdpa/drivers/.../unbind
+Date:		March 2020
+Contact:	virtualization@lists.linux-foundation.org
+Description:
+		Writing a device name to this file will cause the driver to
+		attempt to unbind from the device. This may be useful when
+		overriding default bindings.
+
+What:		/sys/bus/vdpa/devices/.../driver_override
+Date:		November 2021
+Contact:	virtualization@lists.linux-foundation.org
+Description:
+		This file allows the driver for a device to be specified.
+		When specified, only a driver with a name matching the value
+		written to driver_override will have an opportunity to bind to
+		the device. The override is specified by writing a string to the
+		driver_override file (echo vhost-vdpa > driver_override) and may
+		be cleared with an empty string (echo > driver_override).
+		This returns the device to standard matching rules binding.
+		Writing to driver_override does not automatically unbind the
+		device from its current driver or make any attempt to
+		automatically load the specified driver. If no driver with a
+		matching name is currently loaded in the kernel, the device will
+		not bind to any driver. This also allows devices to opt-out of
+		driver binding using a driver_override name such as "none".
+		Only a single driver may be specified in the override, there is
+		no support for parsing delimiters.
diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi
index 5402bd74ba43..0d2abd88a18c 100644
--- a/Documentation/ABI/testing/sysfs-class-bdi
+++ b/Documentation/ABI/testing/sysfs-class-bdi
@@ -23,14 +23,17 @@ default
 	The default backing dev, used for non-block device backed
 	filesystems which do not provide their own BDI.
 
-Files under /sys/class/bdi/<bdi>/
-
-read_ahead_kb (read-write)
-
+What:		/sys/class/bdi/<bdi>/read_ahead_kb
+Date:		January 2008
+Contact:	Peter Zijlstra <a.p.zijlstra@chello.nl>
+Description:
 	Size of the read-ahead window in kilobytes
 
-min_ratio (read-write)
-
+	(read-write)
+What:		/sys/class/bdi/<bdi>/min_ratio
+Date:		January 2008
+Contact:	Peter Zijlstra <a.p.zijlstra@chello.nl>
+Description:
 	Under normal circumstances each device is given a part of the
 	total write-back cache that relates to its current average
 	writeout speed in relation to the other devices.
@@ -39,8 +42,27 @@ min_ratio (read-write)
 	percentage of the write-back cache to a particular device.
 	For example, this is useful for providing a minimum QoS.
 
-max_ratio (read-write)
+	(read-write)
 
+What:		/sys/class/bdi/<bdi>/min_ratio_fine
+Date:		November 2022
+Contact:	Stefan Roesch <shr@devkernel.io>
+Description:
+	Under normal circumstances each device is given a part of the
+	total write-back cache that relates to its current average
+	writeout speed in relation to the other devices.
+
+	The 'min_ratio_fine' parameter allows assigning a minimum reserve
+	of the write-back cache to a particular device. The value is
+	expressed as part of 1 million. For example, this is useful for
+	providing a minimum QoS.
+
+	(read-write)
+
+What:		/sys/class/bdi/<bdi>/max_ratio
+Date:		January 2008
+Contact:	Peter Zijlstra <a.p.zijlstra@chello.nl>
+Description:
 	Allows limiting a particular device to use not more than the
 	given percentage of the write-back cache.  This is useful in
 	situations where we want to avoid one device taking all or
@@ -48,7 +70,65 @@ max_ratio (read-write)
 	mount that is prone to get stuck, or a FUSE mount which cannot
 	be trusted to play fair.
 
-stable_pages_required (read-only)
+	(read-write)
+
+What:		/sys/class/bdi/<bdi>/max_ratio_fine
+Date:		November 2022
+Contact:	Stefan Roesch <shr@devkernel.io>
+Description:
+	Allows limiting a particular device to use not more than the
+	given value of the write-back cache.  The value is given as part
+	of 1 million. This is useful in situations where we want to avoid
+	one device taking all or most of the write-back cache.  For example
+	in case of an NFS mount that is prone to get stuck, or a FUSE mount
+	which cannot be trusted to play fair.
+
+	(read-write)
 
+What:		/sys/class/bdi/<bdi>/min_bytes
+Date:		October 2022
+Contact:	Stefan Roesch <shr@devkernel.io>
+Description:
+	Under normal circumstances each device is given a part of the
+	total write-back cache that relates to its current average
+	writeout speed in relation to the other devices.
+
+	The 'min_bytes' parameter allows assigning a minimum
+	percentage of the write-back cache to a particular device
+	expressed in bytes.
+	For example, this is useful for providing a minimum QoS.
+
+	(read-write)
+
+What:		/sys/class/bdi/<bdi>/max_bytes
+Date:		October 2022
+Contact:	Stefan Roesch <shr@devkernel.io>
+Description:
+	Allows limiting a particular device to use not more than the
+	given 'max_bytes' of the write-back cache.  This is useful in
+	situations where we want to avoid one device taking all or
+	most of the write-back cache.  For example in case of an NFS
+	mount that is prone to get stuck, a FUSE mount which cannot be
+	trusted to play fair, or a nbd device.
+
+	(read-write)
+
+What:		/sys/class/bdi/<bdi>/strict_limit
+Date:		October 2022
+Contact:	Stefan Roesch <shr@devkernel.io>
+Description:
+	Forces per-BDI checks for the share of given device in the write-back
+	cache even before the global background dirty limit is reached. This
+	is useful in situations where the global limit is much higher than
+	affordable for given relatively slow (or untrusted) device. Turning
+	strictlimit on has no visible effect if max_ratio is equal to 100%.
+
+	(read-write)
+What:		/sys/class/bdi/<bdi>/stable_pages_required
+Date:		January 2008
+Contact:	Peter Zijlstra <a.p.zijlstra@chello.nl>
+Description:
 	If set, the backing device requires that all pages comprising a write
 	request must not be changed until writeout is complete.
+
+	(read-only)
diff --git a/Documentation/ABI/testing/sysfs-class-cxl b/Documentation/ABI/testing/sysfs-class-cxl
index 818f55970efb..594fda254130 100644
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@@ -103,8 +103,8 @@ What:           /sys/class/cxl/<afu>/api_version_compatible
 Date:           September 2014
 Contact:        linuxppc-dev@lists.ozlabs.org
 Description:    read only
-                Decimal value of the the lowest version of the userspace API
-                this this kernel supports.
+                Decimal value of the lowest version of the userspace API
+                this kernel supports.
 Users:		https://github.com/ibm-capi/libcxl
 
 
@@ -166,10 +166,11 @@ Description:    read only
                 Decimal value of the Per Process MMIO space length.
 Users:		https://github.com/ibm-capi/libcxl
 
-What:           /sys/class/cxl/<afu>m/pp_mmio_off (not in a guest)
+What:           /sys/class/cxl/<afu>m/pp_mmio_off
 Date:           September 2014
 Contact:        linuxppc-dev@lists.ozlabs.org
 Description:    read only
+                (not in a guest)
                 Decimal value of the Per Process MMIO space offset.
 Users:		https://github.com/ibm-capi/libcxl
 
@@ -190,28 +191,31 @@ Description:    read only
                 Identifies the revision level of the PSL.
 Users:		https://github.com/ibm-capi/libcxl
 
-What:           /sys/class/cxl/<card>/base_image (not in a guest)
+What:           /sys/class/cxl/<card>/base_image
 Date:           September 2014
 Contact:        linuxppc-dev@lists.ozlabs.org
 Description:    read only
+                (not in a guest)
                 Identifies the revision level of the base image for devices
                 that support loadable PSLs. For FPGAs this field identifies
                 the image contained in the on-adapter flash which is loaded
                 during the initial program load.
 Users:		https://github.com/ibm-capi/libcxl
 
-What:           /sys/class/cxl/<card>/image_loaded (not in a guest)
+What:           /sys/class/cxl/<card>/image_loaded
 Date:           September 2014
 Contact:        linuxppc-dev@lists.ozlabs.org
 Description:    read only
+                (not in a guest)
                 Will return "user" or "factory" depending on the image loaded
                 onto the card.
 Users:		https://github.com/ibm-capi/libcxl
 
-What:           /sys/class/cxl/<card>/load_image_on_perst (not in a guest)
+What:           /sys/class/cxl/<card>/load_image_on_perst
 Date:           December 2014
 Contact:        linuxppc-dev@lists.ozlabs.org
 Description:    read/write
+                (not in a guest)
                 Valid entries are "none", "user", and "factory".
                 "none" means PERST will not cause image to be loaded to the
                 card.  A power cycle is required to load the image.
@@ -235,10 +239,11 @@ Description:    write only
                 contexts on the card AFUs.
 Users:		https://github.com/ibm-capi/libcxl
 
-What:		/sys/class/cxl/<card>/perst_reloads_same_image (not in a guest)
+What:		/sys/class/cxl/<card>/perst_reloads_same_image
 Date:		July 2015
 Contact:	linuxppc-dev@lists.ozlabs.org
 Description:	read/write
+                (not in a guest)
 		Trust that when an image is reloaded via PERST, it will not
 		have changed.
 
diff --git a/Documentation/ABI/testing/sysfs-class-devfreq-event b/Documentation/ABI/testing/sysfs-class-devfreq-event
index ceaf0f686d4a..dbe48495e55a 100644
--- a/Documentation/ABI/testing/sysfs-class-devfreq-event
+++ b/Documentation/ABI/testing/sysfs-class-devfreq-event
@@ -1,25 +1,25 @@
-What:		/sys/class/devfreq-event/event(x)/
+What:		/sys/class/devfreq-event/event<x>/
 Date:		January 2017
 Contact:	Chanwoo Choi <cw00.choi@samsung.com>
 Description:
 		Provide a place in sysfs for the devfreq-event objects.
 		This allows accessing various devfreq-event specific variables.
-		The name of devfreq-event object denoted as 'event(x)' which
+		The name of devfreq-event object denoted as 'event<x>' which
 		includes the unique number of 'x' for each devfreq-event object.
 
-What:		/sys/class/devfreq-event/event(x)/name
+What:		/sys/class/devfreq-event/event<x>/name
 Date:		January 2017
 Contact:	Chanwoo Choi <cw00.choi@samsung.com>
 Description:
-		The /sys/class/devfreq-event/event(x)/name attribute contains
+		The /sys/class/devfreq-event/event<x>/name attribute contains
 		the name of the devfreq-event object. This attribute is
 		read-only.
 
-What:		/sys/class/devfreq-event/event(x)/enable_count
+What:		/sys/class/devfreq-event/event<x>/enable_count
 Date:		January 2017
 Contact:	Chanwoo Choi <cw00.choi@samsung.com>
 Description:
-		The /sys/class/devfreq-event/event(x)/enable_count attribute
+		The /sys/class/devfreq-event/event<x>/enable_count attribute
 		contains the reference count to enable the devfreq-event
 		object. If the device is enabled, the value of attribute is
 		greater than zero.
diff --git a/Documentation/ABI/testing/sysfs-class-extcon b/Documentation/ABI/testing/sysfs-class-extcon
index fde0fecd5de9..f8e705375b24 100644
--- a/Documentation/ABI/testing/sysfs-class-extcon
+++ b/Documentation/ABI/testing/sysfs-class-extcon
@@ -65,19 +65,19 @@ Description:
 		interface associated with each cable cannot update
 		multiple cable states of an extcon device simultaneously.
 
-What:		/sys/class/extcon/.../cable.x/name
+What:		/sys/class/extcon/.../cable.X/name
 Date:		February 2012
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
-		The /sys/class/extcon/.../cable.x/name shows the name of cable
-		"x" (integer between 0 and 31) of an extcon device.
+		The /sys/class/extcon/.../cable.X/name shows the name of cable
+		"X" (integer between 0 and 31) of an extcon device.
 
-What:		/sys/class/extcon/.../cable.x/state
+What:		/sys/class/extcon/.../cable.X/state
 Date:		February 2012
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
-		The /sys/class/extcon/.../cable.x/state shows and stores the
-		state of cable "x" (integer between 0 and 31) of an extcon
+		The /sys/class/extcon/.../cable.X/state shows and stores the
+		state of cable "X" (integer between 0 and 31) of an extcon
 		device. The state value is either 0 (detached) or 1
 		(attached).
 
diff --git a/Documentation/ABI/testing/sysfs-class-fc b/Documentation/ABI/testing/sysfs-class-fc
new file mode 100644
index 000000000000..3057a6d3b8cf
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-fc
@@ -0,0 +1,27 @@
+What:		/sys/class/fc/fc_udev_device/appid_store
+Date:		Aug 2021
+Contact:	Muneendra Kumar <muneendra.kumar@broadconm.com>
+Description:
+		This interface allows an admin to set an FC application
+		identifier in the blkcg associated with a cgroup id. The
+		identifier is typically a UUID that is associated with
+		an application or logical entity such as a virtual
+		machine or container group. The application or logical
+		entity utilizes a block device via the cgroup id.
+		FC adapter drivers may query the identifier and tag FC
+		traffic based on the identifier. FC host and FC fabric
+		entities can utilize the application id and FC traffic
+		tag to identify traffic sources.
+
+		The interface expects a string "<cgroupid>:<appid>" where:
+		<cgroupid> is inode of the cgroup in hexadecimal
+		<appid> is user provided string upto 128 characters
+		in length.
+
+		If an appid_store is done for a cgroup id that already
+		has an appid set, the new value will override the
+		previous value.
+
+		If an admin wants to remove an FC application identifier
+		from a cgroup, an appid_store should be done with the
+		following string: "<cgroupid>:"
diff --git a/Documentation/ABI/testing/sysfs-class-firmware b/Documentation/ABI/testing/sysfs-class-firmware
new file mode 100644
index 000000000000..978d3d500400
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-firmware
@@ -0,0 +1,77 @@
+What: 		/sys/class/firmware/.../data
+Date:		July 2022
+KernelVersion:	5.19
+Contact:	Russ Weight <russell.h.weight@intel.com>
+Description:	The data sysfs file is used for firmware-fallback and for
+		firmware uploads. Cat a firmware image to this sysfs file
+		after you echo 1 to the loading sysfs file. When the firmware
+		image write is complete, echo 0 to the loading sysfs file. This
+		sequence will signal the completion of the firmware write and
+		signal the lower-level driver that the firmware data is
+		available.
+
+What: 		/sys/class/firmware/.../cancel
+Date:		July 2022
+KernelVersion:	5.19
+Contact:	Russ Weight <russell.h.weight@intel.com>
+Description:	Write-only. For firmware uploads, write a "1" to this file to
+		request that the transfer of firmware data to the lower-level
+		device be canceled. This request will be rejected (EBUSY) if
+		the update cannot be canceled (e.g. a FLASH write is in
+		progress) or (ENODEV) if there is no firmware update in progress.
+
+What: 		/sys/class/firmware/.../error
+Date:		July 2022
+KernelVersion:	5.19
+Contact:	Russ Weight <russell.h.weight@intel.com>
+Description:	Read-only. Returns a string describing a failed firmware
+		upload. This string will be in the form of <STATUS>:<ERROR>,
+		where <STATUS> will be one of the status strings described
+		for the status sysfs file and <ERROR> will be one of the
+		following: "hw-error", "timeout", "user-abort", "device-busy",
+		"invalid-file-size", "read-write-error", "flash-wearout". The
+		error sysfs file is only meaningful when the current firmware
+		upload status is "idle". If this file is read while a firmware
+		transfer is in progress, then the read will fail with EBUSY.
+
+What: 		/sys/class/firmware/.../loading
+Date:		July 2022
+KernelVersion:	5.19
+Contact:	Russ Weight <russell.h.weight@intel.com>
+Description:	The loading sysfs file is used for both firmware-fallback and
+		for firmware uploads. Echo 1 onto the loading file to indicate
+		you are writing a firmware file to the data sysfs node. Echo
+		-1 onto this file to abort the data write or echo 0 onto this
+		file to indicate that the write is complete. For firmware
+		uploads, the zero value also triggers the transfer of the
+		firmware data to the lower-level device driver.
+
+What: 		/sys/class/firmware/.../remaining_size
+Date:		July 2022
+KernelVersion:	5.19
+Contact:	Russ Weight <russell.h.weight@intel.com>
+Description:	Read-only. For firmware upload, this file contains the size
+		of the firmware data that remains to be transferred to the
+		lower-level device driver. The size value is initialized to
+		the full size of the firmware image that was previously
+		written to the data sysfs file. This value is periodically
+		updated during the "transferring" phase of the firmware
+		upload.
+		Format: "%u".
+
+What: 		/sys/class/firmware/.../status
+Date:		July 2022
+KernelVersion:	5.19
+Contact:	Russ Weight <russell.h.weight@intel.com>
+Description:	Read-only. Returns a string describing the current status of
+		a firmware upload. The string will be one of the following:
+		idle, "receiving", "preparing", "transferring", "programming".
+
+What: 		/sys/class/firmware/.../timeout
+Date:		July 2022
+KernelVersion:	5.19
+Contact:	Russ Weight <russell.h.weight@intel.com>
+Description:	This file supports the timeout mechanism for firmware
+		fallback.  This file has no affect on firmware uploads. For
+		more information on timeouts please see the documentation
+		for firmware fallback.
diff --git a/Documentation/ABI/testing/sysfs-class-firmware-attributes b/Documentation/ABI/testing/sysfs-class-firmware-attributes
index 90fdf935aa5e..4cdba3477176 100644
--- a/Documentation/ABI/testing/sysfs-class-firmware-attributes
+++ b/Documentation/ABI/testing/sysfs-class-firmware-attributes
@@ -116,7 +116,7 @@ Description:
 					    <value>[ForceIf:<attribute>=<value>]
 					    <value>[ForceIfNot:<attribute>=<value>]
 
-					For example:
+					For example::
 
 					    LegacyOrom/dell_value_modifier has value:
 						    Disabled[ForceIf:SecureBoot=Enabled]
@@ -161,6 +161,15 @@ Description:
 						power-on:
 							Representing a password required to use
 							the system
+						system-mgmt:
+							Representing System Management password.
+							See Lenovo extensions section for details
+						HDD:
+							Representing HDD password
+							See Lenovo extensions section for details
+						NVMe:
+							Representing NVMe password
+							See Lenovo extensions section for details
 
 		mechanism:
 					The means of authentication.  This attribute is mandatory.
@@ -203,10 +212,17 @@ Description:
 		the next boot.
 
 		Lenovo specific class extensions
-		------------------------------
+		--------------------------------
 
 		On Lenovo systems the following additional settings are available:
 
+		role: system-mgmt	This gives the same authority as the bios-admin password to control
+					security related features. The authorities allocated can be set via
+					the BIOS menu SMP Access Control Policy
+
+		role: HDD & NVMe	This password is used to unlock access to the drive at boot. Note see
+					'level' and 'index' extensions below.
+
 		lenovo_encoding:
 					The encoding method that is used. This can be either "ascii"
 					or "scancode". Default is set to "ascii"
@@ -216,6 +232,71 @@ Description:
 					two char code (e.g. "us", "fr", "gr") and may vary per platform.
 					Default is set to "us"
 
+		level:
+					Available for HDD and NVMe authentication to set 'user' or 'master'
+					privilege level.
+					If only the user password is configured then this should be used to
+					unlock the drive at boot. If both master and user passwords are set
+					then either can be used. If a master password is set a user password
+					is required.
+					This attribute defaults to 'user' level
+
+		index:
+					Used with HDD and NVME authentication to set the drive index
+					that is being referenced (e.g hdd0, hdd1 etc)
+					This attribute defaults to device 0.
+
+		certificate, signature, save_signature:
+					These attributes are used for certificate based authentication. This is
+					used in conjunction with a signing server as an alternative to password
+					based authentication.
+					The user writes to the attribute(s) with a BASE64 encoded string obtained
+					from the signing server.
+					The attributes can be displayed to check the stored value.
+
+					Some usage examples:
+
+						Installing a certificate to enable feature::
+
+							echo "supervisor password" > authentication/Admin/current_password
+							echo "signed certificate" > authentication/Admin/certificate
+
+						Updating the installed certificate::
+
+							echo "signature" > authentication/Admin/signature
+							echo "signed certificate" > authentication/Admin/certificate
+
+						Removing the installed certificate::
+
+							echo "signature" > authentication/Admin/signature
+							echo "" > authentication/Admin/certificate
+
+						Changing a BIOS setting::
+
+							echo "signature" > authentication/Admin/signature
+							echo "save signature" > authentication/Admin/save_signature
+							echo Enable > attribute/PasswordBeep/current_value
+
+					You cannot enable certificate authentication if a supervisor password
+					has not been set.
+					Clearing the certificate results in no bios-admin authentication method
+					being configured allowing anyone to make changes.
+					After any of these operations the system must reboot for the changes to
+					take effect.
+
+		certificate_thumbprint:
+					Read only attribute used to display the MD5, SHA1 and SHA256 thumbprints
+					for the certificate installed in the BIOS.
+
+		certificate_to_password:
+					Write only attribute used to switch from certificate based authentication
+					back to password based.
+					Usage::
+
+						echo "signature" > authentication/Admin/signature
+						echo "password" > authentication/Admin/certificate_to_password
+
+
 What:		/sys/class/firmware-attributes/*/attributes/pending_reboot
 Date:		February 2021
 KernelVersion:	5.11
@@ -268,7 +349,7 @@ Description:
 
 		    # echo "factory" > /sys/class/firmware-attributes/*/device/attributes/reset_bios
 		    # cat /sys/class/firmware-attributes/*/device/attributes/reset_bios
-		    # builtinsafe lastknowngood [factory] custom
+		    builtinsafe lastknowngood [factory] custom
 
 		Note that any changes to this attribute requires a reboot
 		for changes to take effect.
diff --git a/Documentation/ABI/testing/sysfs-class-gnss b/Documentation/ABI/testing/sysfs-class-gnss
index c8553d972edd..9650f3a7fc03 100644
--- a/Documentation/ABI/testing/sysfs-class-gnss
+++ b/Documentation/ABI/testing/sysfs-class-gnss
@@ -1,4 +1,4 @@
-What:		/sys/class/gnss/gnssN/type
+What:		/sys/class/gnss/gnss<N>/type
 Date:		May 2018
 KernelVersion:	4.18
 Contact:	Johan Hovold <johan@kernel.org>
diff --git a/Documentation/ABI/testing/sysfs-class-hwmon b/Documentation/ABI/testing/sysfs-class-hwmon
new file mode 100644
index 000000000000..638f4c6d4ec7
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-hwmon
@@ -0,0 +1,958 @@
+What:		/sys/class/hwmon/hwmonX/name
+Description:
+		The chip name.
+		This should be a short, lowercase string, not containing
+		whitespace, dashes, or the wildcard character '*'.
+		This attribute represents the chip name. It is the only
+		mandatory attribute.
+		I2C devices get this attribute created automatically.
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/label
+Description:
+		A descriptive label that allows to uniquely identify a
+		device within the system.
+		The contents of the label are free-form.
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/update_interval
+Description:
+		The interval at which the chip will update readings.
+		Unit: millisecond
+
+		RW
+
+		Some devices have a variable update rate or interval.
+		This attribute can be used to change it to the desired value.
+
+What:		/sys/class/hwmon/hwmonX/inY_min
+Description:
+		Voltage min value.
+
+		Unit: millivolt
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/inY_lcrit
+Description:
+		Voltage critical min value.
+
+		Unit: millivolt
+
+		RW
+
+		If voltage drops to or below this limit, the system may
+		take drastic action such as power down or reset. At the very
+		least, it should report a fault.
+
+What:		/sys/class/hwmon/hwmonX/inY_max
+Description:
+		Voltage max value.
+
+		Unit: millivolt
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/inY_crit
+Description:
+		Voltage critical max value.
+
+		Unit: millivolt
+
+		RW
+
+		If voltage reaches or exceeds this limit, the system may
+		take drastic action such as power down or reset. At the very
+		least, it should report a fault.
+
+What:		/sys/class/hwmon/hwmonX/inY_input
+Description:
+		Voltage input value.
+
+		Unit: millivolt
+
+		RO
+
+		Voltage measured on the chip pin.
+
+		Actual voltage depends on the scaling resistors on the
+		motherboard, as recommended in the chip datasheet.
+
+		This varies by chip and by motherboard.
+		Because of this variation, values are generally NOT scaled
+		by the chip driver, and must be done by the application.
+		However, some drivers (notably lm87 and via686a)
+		do scale, because of internal resistors built into a chip.
+		These drivers will output the actual voltage. Rule of
+		thumb: drivers should report the voltage values at the
+		"pins" of the chip.
+
+What:		/sys/class/hwmon/hwmonX/inY_average
+Description:
+		Average voltage
+
+		Unit: millivolt
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/inY_lowest
+Description:
+		Historical minimum voltage
+
+		Unit: millivolt
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/inY_highest
+Description:
+		Historical maximum voltage
+
+		Unit: millivolt
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/inY_reset_history
+Description:
+		Reset inX_lowest and inX_highest
+
+		WO
+
+What:		/sys/class/hwmon/hwmonX/in_reset_history
+Description:
+		Reset inX_lowest and inX_highest for all sensors
+
+		WO
+
+What:		/sys/class/hwmon/hwmonX/inY_label
+Description:
+		Suggested voltage channel label.
+
+		Text string
+
+		Should only be created if the driver has hints about what
+		this voltage channel is being used for, and user-space
+		doesn't. In all other cases, the label is provided by
+		user-space.
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/inY_enable
+Description:
+		Enable or disable the sensors.
+
+		When disabled the sensor read will return -ENODATA.
+
+		- 1: Enable
+		- 0: Disable
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/cpuY_vid
+Description:
+		CPU core reference voltage.
+
+		Unit: millivolt
+
+		RO
+
+		Not always correct.
+
+What:		/sys/class/hwmon/hwmonX/vrm
+Description:
+		Voltage Regulator Module version number.
+
+		RW (but changing it should no more be necessary)
+
+		Originally the VRM standard version multiplied by 10, but now
+		an arbitrary number, as not all standards have a version
+		number.
+
+		Affects the way the driver calculates the CPU core reference
+		voltage from the vid pins.
+
+What:		/sys/class/hwmon/hwmonX/inY_rated_min
+Description:
+		Minimum rated voltage.
+
+		Unit: millivolt
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/inY_rated_max
+Description:
+		Maximum rated voltage.
+
+		Unit: millivolt
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/fanY_min
+Description:
+		Fan minimum value
+
+		Unit: revolution/min (RPM)
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/fanY_max
+Description:
+		Fan maximum value
+
+		Unit: revolution/min (RPM)
+
+		Only rarely supported by the hardware.
+		RW
+
+What:		/sys/class/hwmon/hwmonX/fanY_input
+Description:
+		Fan input value.
+
+		Unit: revolution/min (RPM)
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/fanY_div
+Description:
+		Fan divisor.
+
+		Integer value in powers of two (1, 2, 4, 8, 16, 32, 64, 128).
+
+		RW
+
+		Some chips only support values 1, 2, 4 and 8.
+		Note that this is actually an internal clock divisor, which
+		affects the measurable speed range, not the read value.
+
+What:		/sys/class/hwmon/hwmonX/fanY_pulses
+Description:
+		Number of tachometer pulses per fan revolution.
+
+		Integer value, typically between 1 and 4.
+
+		RW
+
+		This value is a characteristic of the fan connected to the
+		device's input, so it has to be set in accordance with the fan
+		model.
+
+		Should only be created if the chip has a register to configure
+		the number of pulses. In the absence of such a register (and
+		thus attribute) the value assumed by all devices is 2 pulses
+		per fan revolution.
+
+What:		/sys/class/hwmon/hwmonX/fanY_target
+Description:
+		Desired fan speed
+
+		Unit: revolution/min (RPM)
+
+		RW
+
+		Only makes sense if the chip supports closed-loop fan speed
+		control based on the measured fan speed.
+
+What:		/sys/class/hwmon/hwmonX/fanY_label
+Description:
+		Suggested fan channel label.
+
+		Text string
+
+		Should only be created if the driver has hints about what
+		this fan channel is being used for, and user-space doesn't.
+		In all other cases, the label is provided by user-space.
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/fanY_enable
+Description:
+		Enable or disable the sensors.
+
+		When disabled the sensor read will return -ENODATA.
+
+		- 1: Enable
+		- 0: Disable
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/fanY_fault
+Description:
+		Reports if a fan has reported failure.
+
+		- 1: Failed
+		- 0: Ok
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/pwmY
+Description:
+		Pulse width modulation fan control.
+
+		Integer value in the range 0 to 255
+
+		RW
+
+		255 is max or 100%.
+
+What:		/sys/class/hwmon/hwmonX/pwmY_enable
+Description:
+		Fan speed control method:
+
+		- 0: no fan speed control (i.e. fan at full speed)
+		- 1: manual fan speed control enabled (using `pwmY`)
+		- 2+: automatic fan speed control enabled
+
+		Check individual chip documentation files for automatic mode
+		details.
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/pwmY_mode
+Description:
+		- 0: DC mode (direct current)
+		- 1: PWM mode (pulse-width modulation)
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/pwmY_freq
+Description:
+		Base PWM frequency in Hz.
+
+		Only possibly available when pwmN_mode is PWM, but not always
+		present even then.
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/pwmY_auto_channels_temp
+Description:
+		Select which temperature channels affect this PWM output in
+		auto mode.
+
+		Bitfield, 1 is temp1, 2 is temp2, 4 is temp3 etc...
+		Which values are possible depend on the chip used.
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/pwmY_auto_pointZ_pwm
+What:		/sys/class/hwmon/hwmonX/pwmY_auto_pointZ_temp
+What:		/sys/class/hwmon/hwmonX/pwmY_auto_pointZ_temp_hyst
+Description:
+		Define the PWM vs temperature curve.
+
+		Number of trip points is chip-dependent. Use this for chips
+		which associate trip points to PWM output channels.
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/tempY_auto_pointZ_pwm
+What:		/sys/class/hwmon/hwmonX/tempY_auto_pointZ_temp
+What:		/sys/class/hwmon/hwmonX/tempY_auto_pointZ_temp_hyst
+Description:
+		Define the PWM vs temperature curve.
+
+		Number of trip points is chip-dependent. Use this for chips
+		which associate trip points to temperature channels.
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/tempY_type
+Description:
+		Sensor type selection.
+
+		Integers 1 to 6
+
+		RW
+
+		- 1: CPU embedded diode
+		- 2: 3904 transistor
+		- 3: thermal diode
+		- 4: thermistor
+		- 5: AMD AMDSI
+		- 6: Intel PECI
+
+		Not all types are supported by all chips
+
+What:		/sys/class/hwmon/hwmonX/tempY_max
+Description:
+		Temperature max value.
+
+		Unit: millidegree Celsius (or millivolt, see below)
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/tempY_min
+Description:
+		Temperature min value.
+
+		Unit: millidegree Celsius
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/tempY_max_hyst
+Description:
+		Temperature hysteresis value for max limit.
+
+		Unit: millidegree Celsius
+
+		Must be reported as an absolute temperature, NOT a delta
+		from the max value.
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/tempY_min_hyst
+Description:
+		Temperature hysteresis value for min limit.
+		Unit: millidegree Celsius
+
+		Must be reported as an absolute temperature, NOT a delta
+		from the min value.
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/tempY_input
+Description:
+		Temperature input value.
+
+		Unit: millidegree Celsius
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/tempY_crit
+Description:
+		Temperature critical max value, typically greater than
+		corresponding temp_max values.
+
+		Unit: millidegree Celsius
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/tempY_crit_alarm
+Description:
+		Critical high temperature alarm flag.
+
+		- 0: OK
+		- 1: temperature has reached tempY_crit
+
+		RW
+
+		Contrary to regular alarm flags which clear themselves
+		automatically when read, this one sticks until cleared by
+		the user. This is done by writing 0 to the file. Writing
+		other values is unsupported.
+
+What:		/sys/class/hwmon/hwmonX/tempY_crit_hyst
+Description:
+		Temperature hysteresis value for critical limit.
+
+		Unit: millidegree Celsius
+
+		Must be reported as an absolute temperature, NOT a delta
+		from the critical value.
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/tempY_emergency
+Description:
+		Temperature emergency max value, for chips supporting more than
+		two upper temperature limits. Must be equal or greater than
+		corresponding temp_crit values.
+
+		Unit: millidegree Celsius
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/tempY_emergency_hyst
+Description:
+		Temperature hysteresis value for emergency limit.
+
+		Unit: millidegree Celsius
+
+		Must be reported as an absolute temperature, NOT a delta
+		from the emergency value.
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/tempY_lcrit
+Description:
+		Temperature critical min value, typically lower than
+		corresponding temp_min values.
+
+		Unit: millidegree Celsius
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/tempY_lcrit_hyst
+Description:
+		Temperature hysteresis value for critical min limit.
+
+		Unit: millidegree Celsius
+
+		Must be reported as an absolute temperature, NOT a delta
+		from the critical min value.
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/tempY_offset
+Description:
+		Temperature offset which is added to the temperature reading
+		by the chip.
+
+		Unit: millidegree Celsius
+
+		Read/Write value.
+
+What:		/sys/class/hwmon/hwmonX/tempY_label
+Description:
+		Suggested temperature channel label.
+
+		Text string
+
+		Should only be created if the driver has hints about what
+		this temperature channel is being used for, and user-space
+		doesn't. In all other cases, the label is provided by
+		user-space.
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/tempY_lowest
+Description:
+		Historical minimum temperature
+
+		Unit: millidegree Celsius
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/tempY_highest
+Description:
+		Historical maximum temperature
+
+		Unit: millidegree Celsius
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/tempY_reset_history
+Description:
+		Reset temp_lowest and temp_highest
+
+		WO
+
+What:		/sys/class/hwmon/hwmonX/temp_reset_history
+Description:
+		Reset temp_lowest and temp_highest for all sensors
+
+		WO
+
+What:		/sys/class/hwmon/hwmonX/tempY_enable
+Description:
+		Enable or disable the sensors.
+
+		When disabled the sensor read will return -ENODATA.
+
+		- 1: Enable
+		- 0: Disable
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/tempY_rated_min
+Description:
+		Minimum rated temperature.
+
+		Unit: millidegree Celsius
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/tempY_rated_max
+Description:
+		Maximum rated temperature.
+
+		Unit: millidegree Celsius
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/currY_max
+Description:
+		Current max value
+
+		Unit: milliampere
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/currY_min
+Description:
+		Current min value.
+
+		Unit: milliampere
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/currY_lcrit
+Description:
+		Current critical low value
+
+		Unit: milliampere
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/currY_crit
+Description:
+		Current critical high value.
+
+		Unit: milliampere
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/currY_input
+Description:
+		Current input value
+
+		Unit: milliampere
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/currY_average
+Description:
+		Average current use
+
+		Unit: milliampere
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/currY_lowest
+Description:
+		Historical minimum current
+
+		Unit: milliampere
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/currY_highest
+Description:
+		Historical maximum current
+		Unit: milliampere
+		RO
+
+What:		/sys/class/hwmon/hwmonX/currY_reset_history
+Description:
+		Reset currX_lowest and currX_highest
+
+		WO
+
+What:		/sys/class/hwmon/hwmonX/curr_reset_history
+Description:
+		Reset currX_lowest and currX_highest for all sensors
+
+		WO
+
+What:		/sys/class/hwmon/hwmonX/currY_enable
+Description:
+		Enable or disable the sensors.
+
+		When disabled the sensor read will return -ENODATA.
+
+		- 1: Enable
+		- 0: Disable
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/currY_rated_min
+Description:
+		Minimum rated current.
+
+		Unit: milliampere
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/currY_rated_max
+Description:
+		Maximum rated current.
+
+		Unit: milliampere
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/powerY_average
+Description:
+		Average power use
+
+		Unit: microWatt
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/powerY_average_interval
+Description:
+		Power use averaging interval.  A poll
+		notification is sent to this file if the
+		hardware changes the averaging interval.
+
+		Unit: milliseconds
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/powerY_average_interval_max
+Description:
+		Maximum power use averaging interval
+
+		Unit: milliseconds
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/powerY_average_interval_min
+Description:
+		Minimum power use averaging interval
+
+		Unit: milliseconds
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/powerY_average_highest
+Description:
+		Historical average maximum power use
+
+		Unit: microWatt
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/powerY_average_lowest
+Description:
+		Historical average minimum power use
+
+		Unit: microWatt
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/powerY_average_max
+Description:
+		A poll notification is sent to
+		`powerY_average` when power use
+		rises above this value.
+
+		Unit: microWatt
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/powerY_average_min
+Description:
+		A poll notification is sent to
+		`powerY_average` when power use
+		sinks below this value.
+
+		Unit: microWatt
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/powerY_input
+Description:
+		Instantaneous power use
+
+		Unit: microWatt
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/powerY_input_highest
+Description:
+		Historical maximum power use
+
+		Unit: microWatt
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/powerY_input_lowest
+Description:
+		Historical minimum power use
+
+		Unit: microWatt
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/powerY_reset_history
+Description:
+		Reset input_highest, input_lowest,
+		average_highest and average_lowest.
+
+		WO
+
+What:		/sys/class/hwmon/hwmonX/powerY_accuracy
+Description:
+		Accuracy of the power meter.
+
+		Unit: Percent
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/powerY_cap
+Description:
+		If power use rises above this limit, the
+		system should take action to reduce power use.
+		A poll notification is sent to this file if the
+		cap is changed by the hardware.  The `*_cap`
+		files only appear if the cap is known to be
+		enforced by hardware.
+
+		Unit: microWatt
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/powerY_cap_hyst
+Description:
+		Margin of hysteresis built around capping and
+		notification.
+
+		Unit: microWatt
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/powerY_cap_max
+Description:
+		Maximum cap that can be set.
+
+		Unit: microWatt
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/powerY_cap_min
+Description:
+		Minimum cap that can be set.
+
+		Unit: microWatt
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/powerY_max
+Description:
+		Maximum power.
+
+		Unit: microWatt
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/powerY_crit
+Description:
+		Critical maximum power.
+
+		If power rises to or above this limit, the
+		system is expected take drastic action to reduce
+		power consumption, such as a system shutdown or
+		a forced powerdown of some devices.
+
+		Unit: microWatt
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/powerY_enable
+Description:
+		Enable or disable the sensors.
+
+		When disabled the sensor read will return
+		-ENODATA.
+
+		- 1: Enable
+		- 0: Disable
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/powerY_rated_min
+Description:
+		Minimum rated power.
+
+		Unit: microWatt
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/powerY_rated_max
+Description:
+		Maximum rated power.
+
+		Unit: microWatt
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/energyY_input
+Description:
+		Cumulative energy use
+
+		Unit: microJoule
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/energyY_enable
+Description:
+		Enable or disable the sensors.
+
+		When disabled the sensor read will return
+		-ENODATA.
+
+		- 1: Enable
+		- 0: Disable
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/humidityY_input
+Description:
+		Humidity
+
+		Unit: milli-percent (per cent mille, pcm)
+
+		RO
+
+
+What:		/sys/class/hwmon/hwmonX/humidityY_enable
+Description:
+		Enable or disable the sensors
+
+		When disabled the sensor read will return
+		-ENODATA.
+
+		- 1: Enable
+		- 0: Disable
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/humidityY_rated_min
+Description:
+		Minimum rated humidity.
+
+		Unit: milli-percent (per cent mille, pcm)
+
+		RO
+
+What:		/sys/class/hwmon/hwmonX/humidityY_rated_max
+Description:
+		Maximum rated humidity.
+
+		Unit: milli-percent (per cent mille, pcm)
+
+		RO
+
+
+What:		/sys/class/hwmon/hwmonX/intrusionY_alarm
+Description:
+		Chassis intrusion detection
+
+		- 0: OK
+		- 1: intrusion detected
+
+		RW
+
+		Contrary to regular alarm flags which clear themselves
+		automatically when read, this one sticks until cleared by
+		the user. This is done by writing 0 to the file. Writing
+		other values is unsupported.
+
+What:		/sys/class/hwmon/hwmonX/intrusionY_beep
+Description:
+		Chassis intrusion beep
+
+		- 0: disable
+		- 1: enable
+
+		RW
+
+What:		/sys/class/hwmon/hwmonX/device/pec
+Description:
+		PEC support on I2C devices
+
+		- 0, off, n: disable
+		- 1, on, y: enable
+
+		RW
diff --git a/Documentation/ABI/testing/sysfs-class-mei b/Documentation/ABI/testing/sysfs-class-mei
index 5c52372b43cb..1db36ddf8e58 100644
--- a/Documentation/ABI/testing/sysfs-class-mei
+++ b/Documentation/ABI/testing/sysfs-class-mei
@@ -6,7 +6,7 @@ Description:
 		The mei/ class sub-directory belongs to mei device class
 
 
-What:		/sys/class/mei/meiN/
+What:		/sys/class/mei/mei<N>/
 Date:		May 2014
 KernelVersion:	3.17
 Contact:	Tomas Winkler <tomas.winkler@intel.com>
@@ -14,7 +14,7 @@ Description:
 		The /sys/class/mei/meiN directory is created for
 		each probed mei device
 
-What:		/sys/class/mei/meiN/fw_status
+What:		/sys/class/mei/mei<N>/fw_status
 Date:		Nov 2014
 KernelVersion:	3.19
 Contact:	Tomas Winkler <tomas.winkler@intel.com>
@@ -29,7 +29,7 @@ Description:	Display fw status registers content
 		Also number of registers varies between 1 and 6
 		depending on generation.
 
-What:		/sys/class/mei/meiN/hbm_ver
+What:		/sys/class/mei/mei<N>/hbm_ver
 Date:		Aug 2016
 KernelVersion:	4.9
 Contact:	Tomas Winkler <tomas.winkler@intel.com>
@@ -38,7 +38,7 @@ Description:	Display the negotiated HBM protocol version.
 		The HBM protocol version negotiated
 		between the driver and the device.
 
-What:		/sys/class/mei/meiN/hbm_ver_drv
+What:		/sys/class/mei/mei<N>/hbm_ver_drv
 Date:		Aug 2016
 KernelVersion:	4.9
 Contact:	Tomas Winkler <tomas.winkler@intel.com>
@@ -46,7 +46,7 @@ Description:	Display the driver HBM protocol version.
 
 		The HBM protocol version supported by the driver.
 
-What:		/sys/class/mei/meiN/tx_queue_limit
+What:		/sys/class/mei/mei<N>/tx_queue_limit
 Date:		Jan 2018
 KernelVersion:	4.16
 Contact:	Tomas Winkler <tomas.winkler@intel.com>
@@ -55,7 +55,7 @@ Description:	Configure tx queue limit
 		Set maximal number of pending writes
 		per opened session.
 
-What:		/sys/class/mei/meiN/fw_ver
+What:		/sys/class/mei/mei<N>/fw_ver
 Date:		May 2018
 KernelVersion:	4.18
 Contact:	Tomas Winkler <tomas.winkler@intel.com>
@@ -66,7 +66,7 @@ Description:	Display the ME firmware version.
 		There can be up to three such blocks for different
 		FW components.
 
-What:		/sys/class/mei/meiN/dev_state
+What:		/sys/class/mei/mei<N>/dev_state
 Date:		Mar 2019
 KernelVersion:	5.1
 Contact:	Tomas Winkler <tomas.winkler@intel.com>
@@ -81,7 +81,7 @@ Description:	Display the ME device state.
 		POWER_DOWN
 		POWER_UP
 
-What:		/sys/class/mei/meiN/trc
+What:		/sys/class/mei/mei<N>/trc
 Date:		Nov 2019
 KernelVersion:	5.5
 Contact:	Tomas Winkler <tomas.winkler@intel.com>
@@ -91,7 +91,7 @@ Description:	Display trc status register content
 		status information into trc status register
 		for BIOS and OS to monitor fw health.
 
-What:		/sys/class/mei/meiN/kind
+What:		/sys/class/mei/mei<N>/kind
 Date:		Jul 2020
 KernelVersion:	5.8
 Contact:	Tomas Winkler <tomas.winkler@intel.com>
diff --git a/Documentation/ABI/testing/sysfs-class-mic b/Documentation/ABI/testing/sysfs-class-mic
index bd0e780c3760..5e5f36d10055 100644
--- a/Documentation/ABI/testing/sysfs-class-mic
+++ b/Documentation/ABI/testing/sysfs-class-mic
@@ -8,7 +8,7 @@ Description:
 		PCIe form factor add-in Coprocessor card based on the Intel Many
 		Integrated Core (MIC) architecture that runs a Linux OS.
 
-What:		/sys/class/mic/mic(x)
+What:		/sys/class/mic/mic<X>
 Date:		October 2013
 KernelVersion:	3.13
 Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
@@ -17,7 +17,7 @@ Description:
 		represent MIC devices (0,1,..etc). Each directory has
 		information specific to that MIC device.
 
-What:		/sys/class/mic/mic(x)/family
+What:		/sys/class/mic/mic<X>/family
 Date:		October 2013
 KernelVersion:	3.13
 Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
@@ -25,7 +25,7 @@ Description:
 		Provides information about the Coprocessor family for an Intel
 		MIC device. For example - "x100"
 
-What:		/sys/class/mic/mic(x)/stepping
+What:		/sys/class/mic/mic<X>/stepping
 Date:		October 2013
 KernelVersion:	3.13
 Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
@@ -33,7 +33,7 @@ Description:
 		Provides information about the silicon stepping for an Intel
 		MIC device. For example - "A0" or "B0"
 
-What:		/sys/class/mic/mic(x)/state
+What:		/sys/class/mic/mic<X>/state
 Date:		October 2013
 KernelVersion:	3.13
 Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
@@ -69,7 +69,7 @@ Description:
 		"shutdown"  Initiates card OS shutdown.
 		==========  ===================================================
 
-What:		/sys/class/mic/mic(x)/shutdown_status
+What:		/sys/class/mic/mic<X>/shutdown_status
 Date:		October 2013
 KernelVersion:	3.13
 Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
@@ -88,7 +88,7 @@ Description:
 		"restart"   Shutdown because of a restart command.
 		==========  ===================================================
 
-What:		/sys/class/mic/mic(x)/cmdline
+What:		/sys/class/mic/mic<X>/cmdline
 Date:		October 2013
 KernelVersion:	3.13
 Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
@@ -104,7 +104,7 @@ Description:
 		or modify existing ones and then write the whole kernel command
 		line back to this entry.
 
-What:		/sys/class/mic/mic(x)/firmware
+What:		/sys/class/mic/mic<X>/firmware
 Date:		October 2013
 KernelVersion:	3.13
 Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
@@ -114,7 +114,7 @@ Description:
 		card can be found. The entry can be written to change the
 		firmware image location under /lib/firmware/.
 
-What:		/sys/class/mic/mic(x)/ramdisk
+What:		/sys/class/mic/mic<X>/ramdisk
 Date:		October 2013
 KernelVersion:	3.13
 Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
@@ -124,7 +124,7 @@ Description:
 		OS boot can be found. The entry can be written to change
 		the ramdisk image location under /lib/firmware/.
 
-What:		/sys/class/mic/mic(x)/bootmode
+What:		/sys/class/mic/mic<X>/bootmode
 Date:		October 2013
 KernelVersion:	3.13
 Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
@@ -135,7 +135,7 @@ Description:
 		a) linux - Boot a Linux image.
 		b) flash - Boot an image for flash updates.
 
-What:		/sys/class/mic/mic(x)/log_buf_addr
+What:		/sys/class/mic/mic<X>/log_buf_addr
 Date:		October 2013
 KernelVersion:	3.13
 Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
@@ -149,7 +149,7 @@ Description:
 		log buffer address to be written can be found in the System.map
 		file of the card OS.
 
-What:		/sys/class/mic/mic(x)/log_buf_len
+What:		/sys/class/mic/mic<X>/log_buf_len
 Date:		October 2013
 KernelVersion:	3.13
 Contact:	Sudeep Dutt <sudeep.dutt@intel.com>
@@ -163,7 +163,7 @@ Description:
 		buffer length address to be written can be found in the
 		System.map file of the card OS.
 
-What:		/sys/class/mic/mic(x)/heartbeat_enable
+What:		/sys/class/mic/mic<X>/heartbeat_enable
 Date:		March 2015
 KernelVersion:	4.4
 Contact:	Ashutosh Dixit <ashutosh.dixit@intel.com>
diff --git a/Documentation/ABI/testing/sysfs-class-mux b/Documentation/ABI/testing/sysfs-class-mux
index 8715f9c7bd4f..c58b7b6e1aa6 100644
--- a/Documentation/ABI/testing/sysfs-class-mux
+++ b/Documentation/ABI/testing/sysfs-class-mux
@@ -7,7 +7,7 @@ Description:
 		Framework and provides a sysfs interface for using MUX
 		controllers.
 
-What:		/sys/class/mux/muxchipN/
+What:		/sys/class/mux/muxchip<N>/
 Date:		April 2017
 KernelVersion:	4.13
 Contact:	Peter Rosin <peda@axentia.se>
diff --git a/Documentation/ABI/testing/sysfs-class-net-peak_usb b/Documentation/ABI/testing/sysfs-class-net-peak_usb
new file mode 100644
index 000000000000..9e3d0bf4d4b2
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-peak_usb
@@ -0,0 +1,19 @@
+
+What:		/sys/class/net/<iface>/peak_usb/can_channel_id
+Date:		November 2022
+KernelVersion:	6.2
+Contact:	Stephane Grosjean <s.grosjean@peak-system.com>
+Description:
+		PEAK PCAN-USB devices support user-configurable CAN channel
+		identifiers. Contrary to a USB serial number, these identifiers
+		are writable and can be set per CAN interface. This means that
+		if a USB device exports multiple CAN interfaces, each of them
+		can be assigned a unique channel ID.
+		This attribute provides read-only access to the currently
+		configured value of the channel identifier. Depending on the
+		device type, the identifier has a length of 8 or 32 bit. The
+		value read from this attribute is always an 8 digit 32 bit
+		hexadecimal value in big endian format. If the device only
+		supports an 8 bit identifier, the upper 24 bit of the value are
+		set to zero.
+
diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
index ca830c6cd809..7c81f0a25a48 100644
--- a/Documentation/ABI/testing/sysfs-class-power
+++ b/Documentation/ABI/testing/sysfs-class-power
@@ -364,7 +364,10 @@ Date:		April 2019
 Contact:	linux-pm@vger.kernel.org
 Description:
 		Represents a battery percentage level, above which charging will
-		stop.
+		stop. Not all hardware is capable of setting this to an arbitrary
+		percentage. Drivers will round written values to the nearest
+		supported value. Reading back the value will show the actual
+		threshold set by the driver.
 
 		Access: Read, Write
 
@@ -380,13 +383,17 @@ Description:
 		algorithm to adjust the charge rate dynamically, without
 		any user configuration required. "Custom" means that the charger
 		uses the charge_control_* properties as configuration for some
-		different algorithm.
+		different algorithm. "Long Life" means the charger reduces its
+		charging rate in order to prolong the battery health. "Bypass"
+		means the charger bypasses the charging path around the
+		integrated converter allowing for a "smart" wall adaptor to
+		perform the power conversion externally.
 
 		Access: Read, Write
 
 		Valid values:
 			      "Unknown", "N/A", "Trickle", "Fast", "Standard",
-			      "Adaptive", "Custom"
+			      "Adaptive", "Custom", "Long Life", "Bypass"
 
 What:		/sys/class/power_supply/<supply_name>/charge_term_current
 Date:		July 2014
@@ -413,7 +420,7 @@ Description:
 			      "Over voltage", "Unspecified failure", "Cold",
 			      "Watchdog timer expire", "Safety timer expire",
 			      "Over current", "Calibration required", "Warm",
-			      "Cool", "Hot"
+			      "Cool", "Hot", "No battery"
 
 What:		/sys/class/power_supply/<supply_name>/precharge_current
 Date:		June 2017
@@ -430,7 +437,8 @@ What:		/sys/class/power_supply/<supply_name>/present
 Date:		May 2007
 Contact:	linux-pm@vger.kernel.org
 Description:
-		Reports whether a battery is present or not in the system.
+		Reports whether a battery is present or not in the system. If the
+		property does not exist, the battery is considered to be present.
 
 		Access: Read
 
@@ -455,6 +463,21 @@ Description:
 			      "Unknown", "Charging", "Discharging",
 			      "Not charging", "Full"
 
+What:		/sys/class/power_supply/<supply_name>/charge_behaviour
+Date:		November 2021
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Represents the charging behaviour.
+
+		Access: Read, Write
+
+		Valid values:
+			================ ====================================
+			auto:            Charge normally, respect thresholds
+			inhibit-charge:  Do not charge while AC is attached
+			force-discharge: Force discharge while AC is attached
+			================ ====================================
+
 What:		/sys/class/power_supply/<supply_name>/technology
 Date:		May 2007
 Contact:	linux-pm@vger.kernel.org
@@ -480,6 +503,19 @@ Description:
 
 		Valid values: Represented in microvolts
 
+What:		/sys/class/power_supply/<supply_name>/cycle_count
+Date:		January 2010
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the number of full charge + discharge cycles the
+		battery has undergone.
+
+		Access: Read
+
+		Valid values:
+			Integer > 0: representing full cycles
+			Integer = 0: cycle_count info is not available
+
 **USB Properties**
 
 What:		/sys/class/power_supply/<supply_name>/input_current_limit
diff --git a/Documentation/ABI/testing/sysfs-class-power-rt9467 b/Documentation/ABI/testing/sysfs-class-power-rt9467
new file mode 100644
index 000000000000..619b7c45d145
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-power-rt9467
@@ -0,0 +1,19 @@
+What:		/sys/class/power_supply/rt9467-*/sysoff_enable
+Date:		Feb 2023
+KernelVersion:	6.3
+Contact:	ChiaEn Wu <chiaen_wu@richtek.com>
+Description:
+		This entry allows enabling the sysoff mode of rt9467 charger
+		devices.
+		If enabled and the input is removed, the internal battery FET
+		is turned off to reduce the leakage from the BAT pin. See
+		device datasheet for details. It's commonly used when the
+		product enter shipping stage. After entering shipping mode,
+		only 'VBUS' or 'Power key" pressed can make it leave this mode.
+		'Disable' also can help to leave it, but it's more like to
+		abort the action before the device really enter shipping mode.
+
+		Access: Read, Write
+		Valid values:
+		- 1: enabled
+		- 0: disabled
diff --git a/Documentation/ABI/testing/sysfs-class-power-rt9471 b/Documentation/ABI/testing/sysfs-class-power-rt9471
new file mode 100644
index 000000000000..0a390ee5ac21
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-power-rt9471
@@ -0,0 +1,32 @@
+What:		/sys/class/power_supply/rt9471-*/sysoff_enable
+Date:		Feb 2023
+KernelVersion:	6.3
+Contact:	ChiYuan Huang <cy_huang@richtek.com>
+Description:
+		This entry allows enabling the sysoff mode of rt9471 charger devices.
+		If enabled and the input is removed, the internal battery FET is turned
+		off to reduce the leakage from the BAT pin. See device datasheet for details.
+		It's commonly used when the product enter shipping stage. After entering
+		shipping mode, only 'VBUS' or 'Power key" pressed can make it leave this
+		mode. 'Disable' also can help to leave it, but it's more like to abort
+		the action before the device really enter shipping mode.
+
+		Access: Read, Write
+		Valid values:
+		- 1: enabled
+		- 0: disabled
+
+What:		/sys/class/power_supply/rt9471-*/port_detect_enable
+Date:		Feb 2023
+KernelVersion:	6.3
+Contact:	ChiYuan Huang <cy_huang@richtek.com>
+Description:
+		This entry allows enabling the USB BC12 port detect function of rt9471 charger
+		devices. If enabled and VBUS is inserted, device will start to do the BC12
+		port detect and report the usb port type when port detect is done. See
+		datasheet for details. Normally controlled when TypeC/USBPD port integrated.
+
+		Access: Read, Write
+		Valid values:
+		- 1: enabled
+		- 0: disabled
diff --git a/Documentation/ABI/testing/sysfs-class-pwm b/Documentation/ABI/testing/sysfs-class-pwm
index c20e61354561..0638c94d01ef 100644
--- a/Documentation/ABI/testing/sysfs-class-pwm
+++ b/Documentation/ABI/testing/sysfs-class-pwm
@@ -7,7 +7,7 @@ Description:
 		Framework and provides a sysfs interface for using PWM
 		channels.
 
-What:		/sys/class/pwm/pwmchipN/
+What:		/sys/class/pwm/pwmchip<N>/
 Date:		May 2013
 KernelVersion:	3.11
 Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
@@ -16,14 +16,14 @@ Description:
 		probed PWM controller/chip where N is the base of the
 		PWM chip.
 
-What:		/sys/class/pwm/pwmchipN/npwm
+What:		/sys/class/pwm/pwmchip<N>/npwm
 Date:		May 2013
 KernelVersion:	3.11
 Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
 Description:
 		The number of PWM channels supported by the PWM chip.
 
-What:		/sys/class/pwm/pwmchipN/export
+What:		/sys/class/pwm/pwmchip<N>/export
 Date:		May 2013
 KernelVersion:	3.11
 Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
@@ -31,14 +31,14 @@ Description:
 		Exports a PWM channel from the PWM chip for sysfs control.
 		Value is between 0 and /sys/class/pwm/pwmchipN/npwm - 1.
 
-What:		/sys/class/pwm/pwmchipN/unexport
+What:		/sys/class/pwm/pwmchip<N>/unexport
 Date:		May 2013
 KernelVersion:	3.11
 Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
 Description:
 		Unexports a PWM channel.
 
-What:		/sys/class/pwm/pwmchipN/pwmX
+What:		/sys/class/pwm/pwmchip<N>/pwmX
 Date:		May 2013
 KernelVersion:	3.11
 Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
@@ -47,21 +47,21 @@ Description:
 		each exported PWM channel where X is the exported PWM
 		channel number.
 
-What:		/sys/class/pwm/pwmchipN/pwmX/period
+What:		/sys/class/pwm/pwmchip<N>/pwmX/period
 Date:		May 2013
 KernelVersion:	3.11
 Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
 Description:
 		Sets the PWM signal period in nanoseconds.
 
-What:		/sys/class/pwm/pwmchipN/pwmX/duty_cycle
+What:		/sys/class/pwm/pwmchip<N>/pwmX/duty_cycle
 Date:		May 2013
 KernelVersion:	3.11
 Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
 Description:
 		Sets the PWM signal duty cycle in nanoseconds.
 
-What:		/sys/class/pwm/pwmchipN/pwmX/polarity
+What:		/sys/class/pwm/pwmchip<N>/pwmX/polarity
 Date:		May 2013
 KernelVersion:	3.11
 Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
@@ -69,7 +69,7 @@ Description:
 		Sets the output polarity of the PWM signal to "normal" or
 		"inversed".
 
-What:		/sys/class/pwm/pwmchipN/pwmX/enable
+What:		/sys/class/pwm/pwmchip<N>/pwmX/enable
 Date:		May 2013
 KernelVersion:	3.11
 Contact:	H Hartley Sweeten <hsweeten@visionengravers.com>
@@ -78,10 +78,10 @@ Description:
 		0 is disabled
 		1 is enabled
 
-What:		/sys/class/pwm/pwmchipN/pwmX/capture
+What:		/sys/class/pwm/pwmchip<N>/pwmX/capture
 Date:		June 2016
 KernelVersion:	4.8
-Contact:	Lee Jones <lee.jones@linaro.org>
+Contact:	Lee Jones <lee@kernel.org>
 Description:
 		Capture information about a PWM signal. The output format is a
 		pair unsigned integers (period and duty cycle), separated by a
diff --git a/Documentation/ABI/testing/sysfs-class-rapidio b/Documentation/ABI/testing/sysfs-class-rapidio
index 19aefb21b639..81e09145525a 100644
--- a/Documentation/ABI/testing/sysfs-class-rapidio
+++ b/Documentation/ABI/testing/sysfs-class-rapidio
@@ -10,7 +10,7 @@ Description:
 		NOTE: An mport ID is not a RapidIO destination ID assigned to a
 		given local mport device.
 
-What:		/sys/class/rapidio_port/rapidioN/sys_size
+What:		/sys/class/rapidio_port/rapidio<N>/sys_size
 Date:		Apr, 2014
 KernelVersion:	v3.15
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
@@ -22,7 +22,7 @@ Description:
 
 		1 = large (16-bit destination ID, max. 65536 devices).
 
-What:		/sys/class/rapidio_port/rapidioN/port_destid
+What:		/sys/class/rapidio_port/rapidio<N>/port_destid
 Date:		Apr, 2014
 KernelVersion:	v3.15
 Contact:	Matt Porter <mporter@kernel.crashing.org>,
diff --git a/Documentation/ABI/testing/sysfs-class-rc b/Documentation/ABI/testing/sysfs-class-rc
index 9c8ff7910858..84e46d70d82b 100644
--- a/Documentation/ABI/testing/sysfs-class-rc
+++ b/Documentation/ABI/testing/sysfs-class-rc
@@ -7,7 +7,7 @@ Description:
 		core and provides a sysfs interface for configuring infrared
 		remote controller receivers.
 
-What:		/sys/class/rc/rcN/
+What:		/sys/class/rc/rc<N>/
 Date:		Apr 2010
 KernelVersion:	2.6.35
 Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
@@ -15,7 +15,7 @@ Description:
 		A /sys/class/rc/rcN directory is created for each remote
 		control receiver device where N is the number of the receiver.
 
-What:		/sys/class/rc/rcN/protocols
+What:		/sys/class/rc/rc<N>/protocols
 Date:		Jun 2010
 KernelVersion:	2.6.36
 Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
@@ -40,7 +40,7 @@ Description:
 		Write fails with EINVAL if an invalid protocol combination or
 		unknown protocol name is used.
 
-What:		/sys/class/rc/rcN/filter
+What:		/sys/class/rc/rc<N>/filter
 Date:		Jan 2014
 KernelVersion:	3.15
 Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
@@ -55,7 +55,7 @@ Description:
 
 		This value may be reset to 0 if the current protocol is altered.
 
-What:		/sys/class/rc/rcN/filter_mask
+What:		/sys/class/rc/rc<N>/filter_mask
 Date:		Jan 2014
 KernelVersion:	3.15
 Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
@@ -72,7 +72,7 @@ Description:
 
 		This value may be reset to 0 if the current protocol is altered.
 
-What:		/sys/class/rc/rcN/wakeup_protocols
+What:		/sys/class/rc/rc<N>/wakeup_protocols
 Date:		Feb 2017
 KernelVersion:	4.11
 Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
@@ -98,7 +98,7 @@ Description:
 		unknown protocol name is used, or if wakeup is not supported by
 		the hardware.
 
-What:		/sys/class/rc/rcN/wakeup_filter
+What:		/sys/class/rc/rc<N>/wakeup_filter
 Date:		Jan 2014
 KernelVersion:	3.15
 Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
@@ -117,7 +117,7 @@ Description:
 
 		This value may be reset to 0 if the wakeup protocol is altered.
 
-What:		/sys/class/rc/rcN/wakeup_filter_mask
+What:		/sys/class/rc/rc<N>/wakeup_filter_mask
 Date:		Jan 2014
 KernelVersion:	3.15
 Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
diff --git a/Documentation/ABI/testing/sysfs-class-rc-nuvoton b/Documentation/ABI/testing/sysfs-class-rc-nuvoton
index d3abe45f8690..f7bad8ecd08f 100644
--- a/Documentation/ABI/testing/sysfs-class-rc-nuvoton
+++ b/Documentation/ABI/testing/sysfs-class-rc-nuvoton
@@ -1,4 +1,4 @@
-What:		/sys/class/rc/rcN/wakeup_data
+What:		/sys/class/rc/rc<N>/wakeup_data
 Date:		Mar 2016
 KernelVersion:	4.6
 Contact:	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator
index 8516f08806dd..475b9a372657 100644
--- a/Documentation/ABI/testing/sysfs-class-regulator
+++ b/Documentation/ABI/testing/sysfs-class-regulator
@@ -370,3 +370,84 @@ Description:
 
 		'unknown' means software cannot determine the state, or
 		the reported state is invalid.
+
+What:		/sys/class/regulator/.../under_voltage
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		under_voltage.  This indicates if the device reports an
+		under-voltage fault (1) or not (0).
+
+What:		/sys/class/regulator/.../over_current
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_current.  This indicates if the device reports an
+		over-current fault (1) or not (0).
+
+What:		/sys/class/regulator/.../regulation_out
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		regulation_out.  This indicates if the device reports an
+		out-of-regulation fault (1) or not (0).
+
+What:		/sys/class/regulator/.../fail
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		fail.  This indicates if the device reports an output failure
+		(1) or not (0).
+
+What:		/sys/class/regulator/.../over_temp
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_temp.  This indicates if the device reports an
+		over-temperature fault (1) or not (0).
+
+What:		/sys/class/regulator/.../under_voltage_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		under_voltage_warn.  This indicates if the device reports an
+		under-voltage warning (1) or not (0).
+
+What:		/sys/class/regulator/.../over_current_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_current_warn.  This indicates if the device reports an
+		over-current warning (1) or not (0).
+
+What:		/sys/class/regulator/.../over_voltage_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_voltage_warn.  This indicates if the device reports an
+		over-voltage warning (1) or not (0).
+
+What:		/sys/class/regulator/.../over_temp_warn
+Date:		April 2022
+KernelVersion:	5.18
+Contact:	Zev Weiss <zev@bewilderbeest.net>
+Description:
+		Some regulator directories will contain a field called
+		over_temp_warn.  This indicates if the device reports an
+		over-temperature warning (1) or not (0).
diff --git a/Documentation/ABI/testing/sysfs-class-rtrs-client b/Documentation/ABI/testing/sysfs-class-rtrs-client
index 49a4157c7bf1..fecc59d1b96f 100644
--- a/Documentation/ABI/testing/sysfs-class-rtrs-client
+++ b/Documentation/ABI/testing/sysfs-class-rtrs-client
@@ -78,7 +78,7 @@ What:		/sys/class/rtrs-client/<session-name>/paths/<src@dst>/hca_name
 Date:		Feb 2020
 KernelVersion:	5.7
 Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com>
-Description:	RO, Contains the the name of HCA the connection established on.
+Description:	RO, Contains the name of HCA the connection established on.
 
 What:		/sys/class/rtrs-client/<session-name>/paths/<src@dst>/hca_port
 Date:		Feb 2020
diff --git a/Documentation/ABI/testing/sysfs-class-rtrs-server b/Documentation/ABI/testing/sysfs-class-rtrs-server
index 3b6d5b067df0..b08601d80409 100644
--- a/Documentation/ABI/testing/sysfs-class-rtrs-server
+++ b/Documentation/ABI/testing/sysfs-class-rtrs-server
@@ -24,7 +24,7 @@ What:		/sys/class/rtrs-server/<session-name>/paths/<src@dst>/hca_name
 Date:		Feb 2020
 KernelVersion:	5.7
 Contact:	Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com>
-Description:	RO, Contains the the name of HCA the connection established on.
+Description:	RO, Contains the name of HCA the connection established on.
 
 What:		/sys/class/rtrs-server/<session-name>/paths/<src@dst>/hca_port
 Date:		Feb 2020
diff --git a/Documentation/ABI/testing/sysfs-class-thermal b/Documentation/ABI/testing/sysfs-class-thermal
new file mode 100644
index 000000000000..8eee37982b2a
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-thermal
@@ -0,0 +1,259 @@
+What:		/sys/class/thermal/thermal_zoneX/type
+Description:
+		Strings which represent the thermal zone type.
+		This is given by thermal zone driver as part of registration.
+		E.g: "acpitz" indicates it's an ACPI thermal device.
+		In order to keep it consistent with hwmon sys attribute; this
+		shouldbe a short, lowercase string, not containing spaces nor
+		dashes.
+
+		RO, Required
+
+What:		/sys/class/thermal/thermal_zoneX/temp
+Description:
+		Current temperature as reported by thermal zone (sensor).
+
+		Unit: millidegree Celsius
+
+		RO, Required
+
+What:		/sys/class/thermal/thermal_zoneX/mode
+Description:
+		One of the predefined values in [enabled, disabled].
+		This file gives information about the algorithm that is
+		currently managing the thermal zone. It can be either default
+		kernel based algorithm or user space application.
+
+		enabled
+				enable Kernel Thermal management.
+		disabled
+				Preventing kernel thermal zone driver actions upon
+				trip points so that user application can take full
+				charge of the thermal management.
+
+		RW, Optional
+
+What:		/sys/class/thermal/thermal_zoneX/policy
+Description:
+		One of the various thermal governors used for a particular zone.
+
+		RW, Required
+
+What:		/sys/class/thermal/thermal_zoneX/available_policies
+Description:
+		Available thermal governors which can be used for a
+		particular zone.
+
+		RO, Required
+
+What:		/sys/class/thermal/thermal_zoneX/trip_point_Y_temp
+Description:
+		The temperature above which trip point will be fired.
+
+		Unit: millidegree Celsius
+
+		RO, Optional
+
+What:		/sys/class/thermal/thermal_zoneX/trip_point_Y_type
+Description:
+		Strings which indicate the type of the trip point.
+
+		E.g. it can be one of critical, hot, passive, `active[0-*]`
+		for ACPI thermal zone.
+
+		RO, Optional
+
+What:		/sys/class/thermal/thermal_zoneX/trip_point_Y_hyst
+Description:
+		The hysteresis value for a trip point, represented as an
+		integer.
+
+		Unit: Celsius
+
+		RW, Optional
+
+What:		/sys/class/thermal/thermal_zoneX/cdevY
+Description:
+	Sysfs link to the thermal cooling device node where the sys I/F
+	for cooling device throttling control represents.
+
+	RO, Optional
+
+What:		/sys/class/thermal/thermal_zoneX/cdevY_trip_point
+Description:
+		The trip point in this thermal zone which `cdev[0-*]` is
+		associated with; -1 means the cooling device is not
+		associated with any trip point.
+
+		RO, Optional
+
+What:		/sys/class/thermal/thermal_zoneX/cdevY_weight
+Description:
+		The influence of `cdev[0-*]` in this thermal zone. This value
+		is relative to the rest of cooling devices in the thermal
+		zone. For example, if a cooling device has a weight double
+		than that of other, it's twice as effective in cooling the
+		thermal zone.
+
+		RW, Optional
+
+What:		/sys/class/thermal/thermal_zoneX/emul_temp
+Description:
+		Interface to set the emulated temperature method in thermal zone
+		(sensor). After setting this temperature, the thermal zone may
+		pass this temperature to platform emulation function if
+		registered or cache it locally. This is useful in debugging
+		different temperature threshold and its associated cooling
+		action. This is write only node and writing 0 on this node
+		should disable emulation.
+
+		Unit: millidegree Celsius
+
+		WO, Optional
+
+		WARNING:
+		    Be careful while enabling this option on production systems,
+		    because userland can easily disable the thermal policy by simply
+		    flooding this sysfs node with low temperature values.
+
+
+What:		/sys/class/thermal/thermal_zoneX/k_d
+Description:
+		The derivative term of the power allocator governor's PID
+		controller. For more information see
+		Documentation/driver-api/thermal/power_allocator.rst
+
+		RW, Optional
+
+What:		/sys/class/thermal/thermal_zoneX/k_i
+Description:
+		The integral term of the power allocator governor's PID
+		controller. This term allows the PID controller to compensate
+		for long term drift. For more information see
+		Documentation/driver-api/thermal/power_allocator.rst
+
+		RW, Optional
+
+What:		/sys/class/thermal/thermal_zoneX/k_po
+Description:
+		The proportional term of the power allocator governor's PID
+		controller during temperature overshoot. Temperature overshoot
+		is when the current temperature is above the "desired
+		temperature" trip point. For more information see
+		Documentation/driver-api/thermal/power_allocator.rst
+
+		RW, Optional
+
+What:		/sys/class/thermal/thermal_zoneX/k_pu
+Description:
+		The proportional term of the power allocator governor's PID
+		controller during temperature undershoot. Temperature undershoot
+		is when the current temperature is below the "desired
+		temperature" trip point. For more information see
+		Documentation/driver-api/thermal/power_allocator.rst
+
+		RW, Optional
+
+What:		/sys/class/thermal/thermal_zoneX/integral_cutoff
+Description:
+		Temperature offset from the desired temperature trip point
+		above which the integral term of the power allocator
+		governor's PID controller starts accumulating errors. For
+		example, if integral_cutoff is 0, then the integral term only
+		accumulates error when temperature is above the desired
+		temperature trip point. For more information see
+		Documentation/driver-api/thermal/power_allocator.rst
+
+		Unit: millidegree Celsius
+
+		RW, Optional
+
+What:		/sys/class/thermal/thermal_zoneX/slope
+Description:
+		The slope constant used in a linear extrapolation model
+		to determine a hotspot temperature based off the sensor's
+		raw readings. It is up to the device driver to determine
+		the usage of these values.
+
+		RW, Optional
+
+What:		/sys/class/thermal/thermal_zoneX/offset
+Description:
+		The offset constant used in a linear extrapolation model
+		to determine a hotspot temperature based off the sensor's
+		raw readings. It is up to the device driver to determine
+		the usage of these values.
+
+		RW, Optional
+
+What:		/sys/class/thermal/thermal_zoneX/sustainable_power
+Description:
+		An estimate of the sustained power that can be dissipated by
+		the thermal zone. Used by the power allocator governor. For
+		more information see
+		Documentation/driver-api/thermal/power_allocator.rst
+
+		Unit: milliwatts
+
+		RW, Optional
+
+What:		/sys/class/thermal/cooling_deviceX/type
+Description:
+		String which represents the type of device, e.g:
+
+		- for generic ACPI: should be "Fan", "Processor" or "LCD"
+		- for memory controller device on intel_menlow platform:
+		  should be "Memory controller".
+
+		RO, Required
+
+What:		/sys/class/thermal/cooling_deviceX/max_state
+Description:
+		The maximum permissible cooling state of this cooling device.
+
+		RO, Required
+
+What:		/sys/class/thermal/cooling_deviceX/cur_state
+Description:
+		The current cooling state of this cooling device.
+		The value can any integer numbers between 0 and max_state:
+
+		- cur_state == 0 means no cooling
+		- cur_state == max_state means the maximum cooling.
+
+		RW, Required
+
+What:		/sys/class/thermal/cooling_deviceX/stats/reset
+Description:
+		Writing any value resets the cooling device's statistics.
+
+		WO, Required
+
+What:		/sys/class/thermal/cooling_deviceX/stats/time_in_state_ms:
+Description:
+		The amount of time spent by the cooling device in various
+		cooling states. The output will have "<state> <time>" pair
+		in each line, which will mean this cooling device spent <time>
+		msec of time at <state>.
+
+		Output will have one line for each of the supported states.
+
+		RO, Required
+
+What:		/sys/class/thermal/cooling_deviceX/stats/total_trans
+Description:
+		A single positive value showing the total number of times
+		the state of a cooling device is changed.
+
+		RO, Required
+
+What:		/sys/class/thermal/cooling_deviceX/stats/trans_table
+Description:
+		This gives fine grained information about all the cooling state
+		transitions. The cat output here is a two dimensional matrix,
+		where an entry <i,j> (row i, column j) represents the number
+		of transitions from State_i to State_j. If the transition
+		table is bigger than PAGE_SIZE, reading this will return
+		an -EFBIG error.
+
+		RO, Required
diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec
index 40122d915ae1..281b995beb05 100644
--- a/Documentation/ABI/testing/sysfs-class-typec
+++ b/Documentation/ABI/testing/sysfs-class-typec
@@ -141,6 +141,14 @@ Description:
 		- "reverse": CC2 orientation
 		- "unknown": Orientation cannot be determined.
 
+What:		/sys/class/typec/<port>/select_usb_power_delivery
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Lists the USB Power Delivery Capabilities that the port can
+		advertise to the partner. The currently used capabilities are in
+		brackets. Selection happens by writing to the file.
+
 USB Type-C partner devices (eg. /sys/class/typec/port0-partner/)
 
 What:		/sys/class/typec/<port>-partner/accessory_mode
@@ -200,7 +208,7 @@ Description:	USB Power Delivery Specification defines a set of product types
 		amc			Alternate Mode Controller
 		======================  ==========================
 
-What:		/sys/class/typec/<port>-partner>/identity/
+What:		/sys/class/typec/<port>-partner/identity/
 Date:		April 2017
 Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
 Description:
diff --git a/Documentation/ABI/testing/sysfs-class-usb_power_delivery b/Documentation/ABI/testing/sysfs-class-usb_power_delivery
new file mode 100644
index 000000000000..1bf9d1d7902c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-usb_power_delivery
@@ -0,0 +1,249 @@
+What:		/sys/class/usb_power_delivery
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Directory for USB Power Delivery devices.
+
+What:		/sys/class/usb_power_delivery/.../revision
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		File showing the USB Power Delivery Specification Revision used
+		in communication.
+
+What:		/sys/class/usb_power_delivery/.../version
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This is an optional attribute file showing the version of the
+		specific revision of the USB Power Delivery Specification. In
+		most cases the specification version is not known and the file
+		is not available.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The source capabilities message "Source_Capabilities" contains a
+		set of Power Data Objects (PDO), each representing a type of
+		power supply. The order of the PDO objects is defined in the USB
+		Power Delivery Specification. Each PDO - power supply - will
+		have its own device, and the PDO device name will start with the
+		object position number as the first character followed by the
+		power supply type name (":" as delimiter).
+
+			/sys/class/usb_power_delivery/.../source_capabilities/<position>:<type>
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The sink capability message "Sink_Capabilities" contains a set
+		of Power Data Objects (PDO) just like with source capabilities,
+		but instead of describing the power capabilities, these objects
+		describe the power requirements.
+
+		The order of the objects in the sink capability message is the
+		same as with the source capabilities message.
+
+Fixed Supplies
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:fixed_supply
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Devices containing the attributes (the bit fields) defined for
+		Fixed Supplies.
+
+		The device "1:fixed_supply" is special. USB Power Delivery
+		Specification dictates that the first PDO (at object position
+		1), and the only mandatory PDO, is always the vSafe5V Fixed
+		Supply Object. vSafe5V Object has additional fields defined for
+		it that the other Fixed Supply Objects do not have and that are
+		related to the USB capabilities rather than power capabilities.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/dual_role_power
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This file contains boolean value that tells does the device
+		support both source and sink power roles.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities/1:fixed_supply/usb_suspend_supported
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This file shows the value of the USB Suspend Supported bit in
+		vSafe5V Fixed Supply Object. If the bit is set then the device
+		will follow the USB 2.0 and USB 3.2 rules for suspend and
+		resume.
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities/1:fixed_supply/higher_capability
+Date:		February 2023
+Contact:	Saranya Gopal <saranya.gopal@linux.intel.com>
+Description:
+		This file shows the value of the Higher capability bit in
+		vsafe5V Fixed Supply Object. If the bit is set, then the sink
+		needs more than vsafe5V(eg. 12 V) to provide full functionality.
+		Valid values: 0, 1
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/unconstrained_power
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This file shows the value of the Unconstrained Power bit in
+		vSafe5V Fixed Supply Object. The bit is set when an external
+		source of power, powerful enough to power the entire system on
+		its own, is available for the device.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/usb_communication_capable
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This file shows the value of the USB Communication Capable bit in
+		vSafe5V Fixed Supply Object.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/dual_role_data
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This file shows the value of the Dual-Role Data bit in vSafe5V
+		Fixed Supply Object. Dual role data means ability act as both
+		USB host and USB device.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/unchunked_extended_messages_supported
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This file shows the value of the Unchunked Extended Messages
+		Supported bit in vSafe5V Fixed Supply Object.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:fixed_supply/voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The voltage the supply supports in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:fixed_supply/maximum_current
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Maximum current of the fixed source supply in milliamperes.
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:fixed_supply/operational_current
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Operational current of the sink in milliamperes.
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:fixed_supply/fast_role_swap_current
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This file contains the value of the "Fast Role Swap USB Type-C
+		Current" field that tells the current level the sink requires
+		after a Fast Role Swap.
+		0 - Fast Swap not supported"
+		1 - Default USB Power"
+		2 - 1.5A@5V"
+		3 - 3.0A@5V"
+
+Variable Supplies
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Variable Power Supply PDO.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply/maximum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Maximum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply/minimum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Minimum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:variable_supply/maximum_current
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The maximum current in milliamperes that the source can supply
+		at the given Voltage range.
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:variable_supply/operational_current
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The operational current in milliamperes that the sink requires
+		at the given Voltage range.
+
+Battery Supplies
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:battery
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Battery PDO.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:battery/maximum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Maximum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:battery/minimum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Minimum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:battery/maximum_power
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Maximum allowable Power in milliwatts.
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:battery/operational_power
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The operational power that the sink requires at the given
+		voltage range.
+
+Standard Power Range (SPR) Programmable Power Supplies
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Programmable Power Supply (PPS) Augmented PDO (APDO).
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/maximum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Maximum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/minimum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Minimum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/maximum_current
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Maximum Current in milliamperes.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:programmable_supply/pps_power_limited
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The PPS Power Limited bit indicates whether or not the source
+		supply will exceed the rated output power if requested.
diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc b/Documentation/ABI/testing/sysfs-class-uwb_rc
index 6c5dcad21e19..a7ea169dc4eb 100644
--- a/Documentation/ABI/testing/sysfs-class-uwb_rc
+++ b/Documentation/ABI/testing/sysfs-class-uwb_rc
@@ -18,14 +18,14 @@ Description:
                 and it will be removed.  The default is 3 superframes
                 (~197 ms) as required by the specification.
 
-What:           /sys/class/uwb_rc/uwbN/
+What:           /sys/class/uwb_rc/uwb<N>/
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        linux-usb@vger.kernel.org
 Description:
                 An individual UWB radio controller.
 
-What:           /sys/class/uwb_rc/uwbN/beacon
+What:           /sys/class/uwb_rc/uwb<N>/beacon
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        linux-usb@vger.kernel.org
@@ -43,7 +43,7 @@ Description:
                 Reading returns the currently active channel, or -1 if
                 the radio controller is not beaconing.
 
-What:           /sys/class/uwb_rc/uwbN/ASIE
+What:           /sys/class/uwb_rc/uwb<N>/ASIE
 Date:           August 2014
 KernelVersion:  3.18
 Contact:        linux-usb@vger.kernel.org
@@ -56,7 +56,7 @@ Description:
                 Reading returns the current ASIE.  Writing replaces
                 the current ASIE with the one written.
 
-What:           /sys/class/uwb_rc/uwbN/scan
+What:           /sys/class/uwb_rc/uwb<N>/scan
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        linux-usb@vger.kernel.org
@@ -75,7 +75,7 @@ Description:
                     4   scan (with start time of <bpst offset>)
 		   ==   =======================================
 
-What:           /sys/class/uwb_rc/uwbN/mac_address
+What:           /sys/class/uwb_rc/uwb<N>/mac_address
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        linux-usb@vger.kernel.org
@@ -85,7 +85,7 @@ Description:
                 controller's EUI-48 but only do so while the device is
                 not beaconing or scanning.
 
-What:           /sys/class/uwb_rc/uwbN/wusbhc
+What:           /sys/class/uwb_rc/uwb<N>/wusbhc
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        linux-usb@vger.kernel.org
@@ -93,7 +93,7 @@ Description:
                 A symlink to the device (if any) of the WUSB Host
                 Controller PAL using this radio controller.
 
-What:           /sys/class/uwb_rc/uwbN/<EUI-48>/
+What:           /sys/class/uwb_rc/uwb<N>/<EUI-48>/
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        linux-usb@vger.kernel.org
@@ -102,7 +102,7 @@ Description:
                 as part of a scan or is a member of the radio
                 controllers beacon group.
 
-What:           /sys/class/uwb_rc/uwbN/<EUI-48>/BPST
+What:           /sys/class/uwb_rc/uwb<N>/<EUI-48>/BPST
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        linux-usb@vger.kernel.org
@@ -111,7 +111,7 @@ Description:
                 interval superframe timer) of the last beacon from
                 this device was received.
 
-What:           /sys/class/uwb_rc/uwbN/<EUI-48>/DevAddr
+What:           /sys/class/uwb_rc/uwb<N>/<EUI-48>/DevAddr
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        linux-usb@vger.kernel.org
@@ -119,7 +119,7 @@ Description:
                 The current DevAddr of this device in colon separated
                 hex octets.
 
-What:           /sys/class/uwb_rc/uwbN/<EUI-48>/EUI_48
+What:           /sys/class/uwb_rc/uwb<N>/<EUI-48>/EUI_48
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        linux-usb@vger.kernel.org
@@ -128,7 +128,7 @@ Description:
                 The EUI-48 of this device in colon separated hex
                 octets.
 
-What:           /sys/class/uwb_rc/uwbN/<EUI-48>/IEs
+What:           /sys/class/uwb_rc/uwb<N>/<EUI-48>/IEs
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        linux-usb@vger.kernel.org
@@ -136,7 +136,7 @@ Description:
                 The latest IEs included in this device's beacon, in
                 space separated hex octets with one IE per line.
 
-What:           /sys/class/uwb_rc/uwbN/<EUI-48>/LQE
+What:           /sys/class/uwb_rc/uwb<N>/<EUI-48>/LQE
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        linux-usb@vger.kernel.org
@@ -146,7 +146,7 @@ Description:
                 This gives an estimate on a suitable PHY rate. Refer
                 to [ECMA-368] section 13.3 for more details.
 
-What:           /sys/class/uwb_rc/uwbN/<EUI-48>/RSSI
+What:           /sys/class/uwb_rc/uwb<N>/<EUI-48>/RSSI
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        linux-usb@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
index 5977e2875325..55eb55cac92e 100644
--- a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
+++ b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
@@ -1,4 +1,4 @@
-What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_chid
+What:           /sys/class/uwb_rc/uwb<N>/wusbhc/wusb_chid
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        David Vrabel <david.vrabel@csr.com>
@@ -9,7 +9,7 @@ Description:
 
                 Set an all zero CHID to stop the host controller.
 
-What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_trust_timeout
+What:           /sys/class/uwb_rc/uwb<N>/wusbhc/wusb_trust_timeout
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        David Vrabel <david.vrabel@csr.com>
@@ -24,7 +24,7 @@ Description:
                 lifetime of PTKs and GTKs) it should not be changed
                 from the default.
 
-What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_phy_rate
+What:           /sys/class/uwb_rc/uwb<N>/wusbhc/wusb_phy_rate
 Date:           August 2009
 KernelVersion:  2.6.32
 Contact:        David Vrabel <david.vrabel@csr.com>
@@ -37,7 +37,7 @@ Description:
                 Refer to [ECMA-368] section 10.3.1.1 for the value to
                 use.
 
-What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_dnts
+What:           /sys/class/uwb_rc/uwb<N>/wusbhc/wusb_dnts
 Date:           June 2013
 KernelVersion:  3.11
 Contact:        Thomas Pugliese <thomas.pugliese@gmail.com>
@@ -47,7 +47,7 @@ Description:
                 often the devices will have the opportunity to send
                 notifications to the host.
 
-What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_retry_count
+What:           /sys/class/uwb_rc/uwb<N>/wusbhc/wusb_retry_count
 Date:           June 2013
 KernelVersion:  3.11
 Contact:        Thomas Pugliese <thomas.pugliese@gmail.com>
diff --git a/Documentation/ABI/testing/sysfs-class-vduse b/Documentation/ABI/testing/sysfs-class-vduse
new file mode 100644
index 000000000000..2f2bc5c8fc48
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-vduse
@@ -0,0 +1,33 @@
+What:		/sys/class/vduse/
+Date:		Oct 2021
+KernelVersion:	5.15
+Contact:	Yongji Xie <xieyongji@bytedance.com>
+Description:
+		The vduse/ class sub-directory belongs to the VDUSE
+		framework and provides a sysfs interface for configuring
+		VDUSE devices.
+
+What:		/sys/class/vduse/control/
+Date:		Oct 2021
+KernelVersion:	5.15
+Contact:	Yongji Xie <xieyongji@bytedance.com>
+Description:
+		This directory entry is created for the control device
+		of VDUSE framework.
+
+What:		/sys/class/vduse/<device-name>/
+Date:		Oct 2021
+KernelVersion:	5.15
+Contact:	Yongji Xie <xieyongji@bytedance.com>
+Description:
+		This directory entry is created when a VDUSE device is
+		created via the control device.
+
+What:		/sys/class/vduse/<device-name>/msg_timeout
+Date:		Oct 2021
+KernelVersion:	5.15
+Contact:	Yongji Xie <xieyongji@bytedance.com>
+Description:
+		(RW) The timeout (in seconds) for waiting for the control
+		message's response from userspace. Default value is 30s.
+		Writing a '0' to the file means to disable the timeout.
diff --git a/Documentation/ABI/testing/sysfs-class-watchdog b/Documentation/ABI/testing/sysfs-class-watchdog
index 585caecda3a5..94fb74615951 100644
--- a/Documentation/ABI/testing/sysfs-class-watchdog
+++ b/Documentation/ABI/testing/sysfs-class-watchdog
@@ -6,6 +6,19 @@ Description:
 		device at boot. It is equivalent to WDIOC_GETBOOTSTATUS of
 		ioctl interface.
 
+What:		/sys/class/watchdog/watchdogn/options
+Date:		April 2023
+Contact:	Thomas Weißschuh
+Description:
+		It is a read only file. It contains options of watchdog device.
+
+What:		/sys/class/watchdog/watchdogn/fw_version
+Date:		April 2023
+Contact:	Thomas Weißschuh
+Description:
+		It is a read only file. It contains firmware version of
+		watchdog device.
+
 What:		/sys/class/watchdog/watchdogn/identity
 Date:		August 2015
 Contact:	Wim Van Sebroeck <wim@iguana.be>
diff --git a/Documentation/ABI/testing/sysfs-devices-hisi_ptt b/Documentation/ABI/testing/sysfs-devices-hisi_ptt
new file mode 100644
index 000000000000..82de6d710266
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-hisi_ptt
@@ -0,0 +1,61 @@
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune
+Date:		October 2022
+KernelVersion:	6.1
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	This directory contains files for tuning the PCIe link
+		parameters(events). Each file is named after the event
+		of the PCIe link.
+
+		See Documentation/trace/hisi-ptt.rst for more information.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl
+Date:		October 2022
+KernelVersion:	6.1
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	(RW) Controls the weight of Tx completion TLPs, which influence
+		the proportion of outbound completion TLPs on the PCIe link.
+		The available tune data is [0, 1, 2]. Writing a negative value
+		will return an error, and out of range values will be converted
+		to 2. The value indicates a probable level of the event.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np
+Date:		October 2022
+KernelVersion:	6.1
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	(RW) Controls the weight of Tx non-posted TLPs, which influence
+		the proportion of outbound non-posted TLPs on the PCIe link.
+		The available tune data is [0, 1, 2]. Writing a negative value
+		will return an error, and out of range values will be converted
+		to 2. The value indicates a probable level of the event.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p
+Date:		October 2022
+KernelVersion:	6.1
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	(RW) Controls the weight of Tx posted TLPs, which influence the
+		proportion of outbound posted TLPs on the PCIe link.
+		The available tune data is [0, 1, 2]. Writing a negative value
+		will return an error, and out of range values will be converted
+		to 2. The value indicates a probable level of the event.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level
+Date:		October 2022
+KernelVersion:	6.1
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	(RW) Control the allocated buffer watermark for inbound packets.
+		The packets will be stored in the buffer first and then transmitted
+		either when the watermark reached or when timed out.
+		The available tune data is [0, 1, 2]. Writing a negative value
+		will return an error, and out of range values will be converted
+		to 2. The value indicates a probable level of the event.
+
+What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level
+Date:		October 2022
+KernelVersion:	6.1
+Contact:	Yicong Yang <yangyicong@hisilicon.com>
+Description:	(RW) Control the allocated buffer watermark of outbound packets.
+		The packets will be stored in the buffer first and then transmitted
+		either when the watermark reached or when timed out.
+		The available tune data is [0, 1, 2]. Writing a negative value
+		will return an error, and out of range values will be converted
+		to 2. The value indicates a probable level of the event.
diff --git a/Documentation/ABI/testing/sysfs-devices-mapping b/Documentation/ABI/testing/sysfs-devices-mapping
index 8d202bac9394..2eee1446ad4c 100644
--- a/Documentation/ABI/testing/sysfs-devices-mapping
+++ b/Documentation/ABI/testing/sysfs-devices-mapping
@@ -1,6 +1,6 @@
 What:           /sys/devices/uncore_iio_x/dieX
 Date:           February 2020
-Contact:        Roman Sudarikov <roman.sudarikov@linux.intel.com>
+Contact:        Alexander Antonov <alexander.antonov@linux.intel.com>
 Description:
                 Each IIO stack (PCIe root port) has its own IIO PMON block, so
                 each dieX file (where X is die number) holds "Segment:Root Bus"
@@ -32,3 +32,31 @@ Description:
 		    IIO PMU 0 on die 1 belongs to PCI RP on bus 0x40, domain 0x0000
 		    IIO PMU 0 on die 2 belongs to PCI RP on bus 0x80, domain 0x0000
 		    IIO PMU 0 on die 3 belongs to PCI RP on bus 0xc0, domain 0x0000
+
+What:           /sys/devices/uncore_upi_x/dieX
+Date:           March 2022
+Contact:        Alexander Antonov <alexander.antonov@linux.intel.com>
+Description:
+                Each /sys/devices/uncore_upi_X/dieY file holds "upi_Z,die_W"
+                value that means UPI link number X on die Y is connected to UPI
+                link Z on die W and this link between sockets can be monitored
+                by UPI PMON block.
+                For example, 4-die Sapphire Rapids platform has the following
+                UPI 0 topology::
+
+		    # tail /sys/devices/uncore_upi_0/die*
+		    ==> /sys/devices/uncore_upi_0/die0 <==
+		    upi_1,die_1
+		    ==> /sys/devices/uncore_upi_0/die1 <==
+		    upi_0,die_3
+		    ==> /sys/devices/uncore_upi_0/die2 <==
+		    upi_1,die_3
+		    ==> /sys/devices/uncore_upi_0/die3 <==
+		    upi_0,die_1
+
+                Which means::
+
+		    UPI link 0 on die 0 is connected to UPI link 1 on die 1
+		    UPI link 0 on die 1 is connected to UPI link 0 on die 3
+		    UPI link 0 on die 2 is connected to UPI link 1 on die 3
+		    UPI link 0 on die 3 is connected to UPI link 0 on die 1
+\ No newline at end of file
diff --git a/Documentation/ABI/testing/sysfs-devices-physical_location b/Documentation/ABI/testing/sysfs-devices-physical_location
new file mode 100644
index 000000000000..202324b87083
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-physical_location
@@ -0,0 +1,42 @@
+What:		/sys/devices/.../physical_location
+Date:		March 2022
+Contact:	Won Chung <wonchung@google.com>
+Description:
+		This directory contains information on physical location of
+		the device connection point with respect to the system's
+		housing.
+
+What:		/sys/devices/.../physical_location/panel
+Date:		March 2022
+Contact:	Won Chung <wonchung@google.com>
+Description:
+		Describes which panel surface of the system’s housing the
+		device connection point resides on.
+
+What:		/sys/devices/.../physical_location/vertical_position
+Date:		March 2022
+Contact:	Won Chung <wonchung@google.com>
+Description:
+		Describes vertical position of the device connection point on
+		the panel surface.
+
+What:		/sys/devices/.../physical_location/horizontal_position
+Date:		March 2022
+Contact:	Won Chung <wonchung@google.com>
+Description:
+		Describes horizontal position of the device connection point on
+		the panel surface.
+
+What:		/sys/devices/.../physical_location/dock
+Date:		March 2022
+Contact:	Won Chung <wonchung@google.com>
+Description:
+		"Yes" if the device connection point resides in a docking
+		station or a port replicator. "No" otherwise.
+
+What:		/sys/devices/.../physical_location/lid
+Date:		March 2022
+Contact:	Won Chung <wonchung@google.com>
+Description:
+		"Yes" if the device connection point resides on the lid of
+		laptop system. "No" otherwise.
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD b/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD
index f7b360a61b21..bc44bc903bc8 100644
--- a/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD
+++ b/Documentation/ABI/testing/sysfs-devices-platform-ACPI-TAD
@@ -74,7 +74,7 @@ Description:
 
 		Reads also cause the AC alarm timer status to be reset.
 
-		Another way to reset the the status of the AC alarm timer is to
+		Another way to reset the status of the AC alarm timer is to
 		write (the number) 0 to this file.
 
 		If the status return value indicates that the timer has expired,
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-dock b/Documentation/ABI/testing/sysfs-devices-platform-dock
index 1d8c18f905c7..411c174de830 100644
--- a/Documentation/ABI/testing/sysfs-devices-platform-dock
+++ b/Documentation/ABI/testing/sysfs-devices-platform-dock
@@ -1,4 +1,4 @@
-What:		/sys/devices/platform/dock.N/docked
+What:		/sys/devices/platform/dock.<N>/docked
 Date:		Dec, 2006
 KernelVersion:	2.6.19
 Contact:	linux-acpi@vger.kernel.org
@@ -6,7 +6,7 @@ Description:
 		(RO) Value 1 or 0 indicates whether the software believes the
 		laptop is docked in a docking station.
 
-What:		/sys/devices/platform/dock.N/undock
+What:		/sys/devices/platform/dock.<N>/undock
 Date:		Dec, 2006
 KernelVersion:	2.6.19
 Contact:	linux-acpi@vger.kernel.org
@@ -14,14 +14,14 @@ Description:
 		(WO) Writing to this file causes the software to initiate an
 		undock request to the firmware.
 
-What:		/sys/devices/platform/dock.N/uid
+What:		/sys/devices/platform/dock.<N>/uid
 Date:		Feb, 2007
 KernelVersion:	v2.6.21
 Contact:	linux-acpi@vger.kernel.org
 Description:
 		(RO) Displays the docking station the laptop is docked to.
 
-What:		/sys/devices/platform/dock.N/flags
+What:		/sys/devices/platform/dock.<N>/flags
 Date:		May, 2007
 KernelVersion:	v2.6.21
 Contact:	linux-acpi@vger.kernel.org
@@ -30,7 +30,7 @@ Description:
 		request has been made by the user (from the immediate_undock
 		option).
 
-What:		/sys/devices/platform/dock.N/type
+What:		/sys/devices/platform/dock.<N>/type
 Date:		Aug, 2008
 KernelVersion:	v2.6.27
 Contact:	linux-acpi@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-soc-ipa b/Documentation/ABI/testing/sysfs-devices-platform-soc-ipa
index c56dcf15bf29..364b1ba41242 100644
--- a/Documentation/ABI/testing/sysfs-devices-platform-soc-ipa
+++ b/Documentation/ABI/testing/sysfs-devices-platform-soc-ipa
@@ -46,33 +46,69 @@ Description:
 		that is supported by the hardware.  The possible values
 		are "MAPv4" or "MAPv5".
 
+What:		.../XXXXXXX.ipa/endpoint_id/
+Date:		July 2022
+KernelVersion:	v5.19
+Contact:	Alex Elder <elder@kernel.org>
+Description:
+		The .../XXXXXXX.ipa/endpoint_id/ directory contains
+		attributes that define IDs associated with IPA
+		endpoints.  The "rx" or "tx" in an endpoint name is
+		from the perspective of the AP.  An endpoint ID is a
+		small unsigned integer.
+
+What:		.../XXXXXXX.ipa/endpoint_id/modem_rx
+Date:		July 2022
+KernelVersion:	v5.19
+Contact:	Alex Elder <elder@kernel.org>
+Description:
+		The .../XXXXXXX.ipa/endpoint_id/modem_rx file contains
+		the ID of the AP endpoint on which packets originating
+		from the embedded modem are received.
+
+What:		.../XXXXXXX.ipa/endpoint_id/modem_tx
+Date:		July 2022
+KernelVersion:	v5.19
+Contact:	Alex Elder <elder@kernel.org>
+Description:
+		The .../XXXXXXX.ipa/endpoint_id/modem_tx file contains
+		the ID of the AP endpoint on which packets destined
+		for the embedded modem are sent.
+
+What:		.../XXXXXXX.ipa/endpoint_id/monitor_rx
+Date:		July 2022
+KernelVersion:	v5.19
+Contact:	Alex Elder <elder@kernel.org>
+Description:
+		The .../XXXXXXX.ipa/endpoint_id/monitor_rx file contains
+		the ID of the AP endpoint on which IPA "monitor" data is
+		received.  The monitor endpoint supplies replicas of
+		packets that enter the IPA hardware for processing.
+		Each replicated packet is preceded by a fixed-size "ODL"
+		header (see .../XXXXXXX.ipa/feature/monitor, above).
+		Large packets are truncated, to reduce the bandwidth
+		required to provide the monitor function.
+
 What:		.../XXXXXXX.ipa/modem/
 Date:		June 2021
 KernelVersion:	v5.14
 Contact:	Alex Elder <elder@kernel.org>
 Description:
-		The .../XXXXXXX.ipa/modem/ directory contains a set of
-		attributes describing properties of the modem execution
-		environment reachable by the IPA hardware.
+		The .../XXXXXXX.ipa/modem/ directory contains attributes
+		describing properties of the modem embedded in the SoC.
 
 What:		.../XXXXXXX.ipa/modem/rx_endpoint_id
 Date:		June 2021
 KernelVersion:	v5.14
 Contact:	Alex Elder <elder@kernel.org>
 Description:
-		The .../XXXXXXX.ipa/feature/rx_endpoint_id file contains
-		the AP endpoint ID that receives packets originating from
-		the modem execution environment.  The "rx" is from the
-		perspective of the AP; this endpoint is considered an "IPA
-		producer".  An endpoint ID is a small unsigned integer.
+		The .../XXXXXXX.ipa/modem/rx_endpoint_id file duplicates
+		the value found in .../XXXXXXX.ipa/endpoint_id/modem_rx.
 
 What:		.../XXXXXXX.ipa/modem/tx_endpoint_id
 Date:		June 2021
 KernelVersion:	v5.14
 Contact:	Alex Elder <elder@kernel.org>
 Description:
-		The .../XXXXXXX.ipa/feature/tx_endpoint_id file contains
-		the AP endpoint ID used to transmit packets destined for
-		the modem execution environment.  The "tx" is from the
-		perspective of the AP; this endpoint is considered an "IPA
-		consumer".  An endpoint ID is a small unsigned integer.
+		The .../XXXXXXX.ipa/modem/tx_endpoint_id file duplicates
+		the value found in .../XXXXXXX.ipa/endpoint_id/modem_tx.
diff --git a/Documentation/ABI/testing/sysfs-devices-power b/Documentation/ABI/testing/sysfs-devices-power
index 1763e64dd152..54195530e97a 100644
--- a/Documentation/ABI/testing/sysfs-devices-power
+++ b/Documentation/ABI/testing/sysfs-devices-power
@@ -269,3 +269,39 @@ Description:
 		the current runtime PM status of the device, which may be
 		"suspended", "suspending", "resuming", "active", "error" (fatal
 		error), or "unsupported" (runtime PM is disabled).
+
+What:		/sys/devices/.../power/runtime_active_time
+Date:		Jul 2010
+Contact:	Arjan van de Ven <arjan@linux.intel.com>
+Description:
+		Reports the total time that the device has been active.
+		Used for runtime PM statistics.
+
+What:		/sys/devices/.../power/runtime_suspended_time
+Date:		Jul 2010
+Contact:	Arjan van de Ven <arjan@linux.intel.com>
+Description:
+		Reports total time that the device has been suspended.
+		Used for runtime PM statistics.
+
+What:		/sys/devices/.../power/runtime_usage
+Date:		Apr 2010
+Contact:	Dominik Brodowski <linux@dominikbrodowski.net>
+Description:
+		Reports the runtime PM usage count of a device.
+
+What:		/sys/devices/.../power/runtime_enabled
+Date:		Apr 2010
+Contact:	Dominik Brodowski <linux@dominikbrodowski.net>
+Description:
+		Is runtime PM enabled for this device?
+		States are "enabled", "disabled", "forbidden" or a
+		combination of the latter two.
+
+What:		/sys/devices/.../power/runtime_active_kids
+Date:		Apr 2010
+Contact:	Dominik Brodowski <linux@dominikbrodowski.net>
+Description:
+		Reports the runtime PM children usage count of a device, or
+		0 if the children will be ignored.
+
diff --git a/Documentation/ABI/testing/sysfs-devices-removable b/Documentation/ABI/testing/sysfs-devices-removable
index bda6c320c8d3..754ecb4587ca 100644
--- a/Documentation/ABI/testing/sysfs-devices-removable
+++ b/Documentation/ABI/testing/sysfs-devices-removable
@@ -7,10 +7,12 @@ Description:
 		bus / platform-specific way. This attribute is only present for
 		devices that can support determining such information:
 
-		"removable": device can be removed from the platform by the user
-		"fixed":     device is fixed to the platform / cannot be removed
+		===========  ===================================================
+		"removable"  device can be removed from the platform by the user
+		"fixed"      device is fixed to the platform / cannot be removed
 			     by the user.
-		"unknown":   The information is unavailable / cannot be deduced.
+		"unknown"    The information is unavailable / cannot be deduced.
+		===========  ===================================================
 
 		Currently this is only supported by USB (which infers the
 		information from a combination of hub descriptor bits and
diff --git a/Documentation/ABI/testing/sysfs-devices-soc b/Documentation/ABI/testing/sysfs-devices-soc
index ea999e292f11..5269808ec35f 100644
--- a/Documentation/ABI/testing/sysfs-devices-soc
+++ b/Documentation/ABI/testing/sysfs-devices-soc
@@ -1,6 +1,6 @@
 What:		/sys/devices/socX
 Date:		January 2012
-contact:	Lee Jones <lee.jones@linaro.org>
+contact:	Lee Jones <lee@kernel.org>
 Description:
 		The /sys/devices/ directory contains a sub-directory for each
 		System-on-Chip (SoC) device on a running platform. Information
@@ -14,14 +14,14 @@ Description:
 
 What:		/sys/devices/socX/machine
 Date:		January 2012
-contact:	Lee Jones <lee.jones@linaro.org>
+contact:	Lee Jones <lee@kernel.org>
 Description:
 		Read-only attribute common to all SoCs. Contains the SoC machine
 		name (e.g. Ux500).
 
 What:		/sys/devices/socX/family
 Date:		January 2012
-contact:	Lee Jones <lee.jones@linaro.org>
+contact:	Lee Jones <lee@kernel.org>
 Description:
 		Read-only attribute common to all SoCs. Contains SoC family name
 		(e.g. DB8500).
@@ -59,7 +59,7 @@ Description:
 
 What:		/sys/devices/socX/soc_id
 Date:		January 2012
-contact:	Lee Jones <lee.jones@linaro.org>
+contact:	Lee Jones <lee@kernel.org>
 Description:
 		Read-only attribute supported by most SoCs. In the case of
 		ST-Ericsson's chips this contains the SoC serial number.
@@ -72,21 +72,21 @@ Description:
 
 What:		/sys/devices/socX/revision
 Date:		January 2012
-contact:	Lee Jones <lee.jones@linaro.org>
+contact:	Lee Jones <lee@kernel.org>
 Description:
 		Read-only attribute supported by most SoCs. Contains the SoC's
 		manufacturing revision number.
 
 What:		/sys/devices/socX/process
 Date:		January 2012
-contact:	Lee Jones <lee.jones@linaro.org>
+contact:	Lee Jones <lee@kernel.org>
 Description:
 		Read-only attribute supported ST-Ericsson's silicon. Contains the
 		the process by which the silicon chip was manufactured.
 
 What:		/sys/bus/soc
 Date:		January 2012
-contact:	Lee Jones <lee.jones@linaro.org>
+contact:	Lee Jones <lee@kernel.org>
 Description:
 		The /sys/bus/soc/ directory contains the usual sub-folders
 		expected under most buses. /sys/bus/soc/devices is of particular
diff --git a/Documentation/ABI/testing/sysfs-devices-state_synced b/Documentation/ABI/testing/sysfs-devices-state_synced
index 0c922d7d02fc..c64636ddac41 100644
--- a/Documentation/ABI/testing/sysfs-devices-state_synced
+++ b/Documentation/ABI/testing/sysfs-devices-state_synced
@@ -21,4 +21,9 @@ Description:
 		at the time the kernel starts are not affected or limited in
 		any way by sync_state() callbacks.
 
+		Writing "1" to this file will force a call to the device's
+		sync_state() function if it hasn't been called already. The
+		sync_state() call happens independent of the state of the
+		consumer devices.
+
 
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index b46ef147616a..f54867cadb0f 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -7,7 +7,7 @@ Description:
 		Individual CPU attributes are contained in subdirectories
 		named by the kernel's logical CPU number, e.g.:
 
-		/sys/devices/system/cpu/cpu#/
+		/sys/devices/system/cpu/cpuX/
 
 What:		/sys/devices/system/cpu/kernel_max
 		/sys/devices/system/cpu/offline
@@ -53,7 +53,7 @@ Description:	Dynamic addition and removal of CPU's.  This is not hotplug
 		the system.  Information written to the file to remove CPU's
 		is architecture specific.
 
-What:		/sys/devices/system/cpu/cpu#/node
+What:		/sys/devices/system/cpu/cpuX/node
 Date:		October 2009
 Contact:	Linux memory management mailing list <linux-mm@kvack.org>
 Description:	Discover NUMA node a CPU belongs to
@@ -67,41 +67,42 @@ Description:	Discover NUMA node a CPU belongs to
 		/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
 
 
-What:		/sys/devices/system/cpu/cpu#/topology/core_id
-		/sys/devices/system/cpu/cpu#/topology/core_siblings
-		/sys/devices/system/cpu/cpu#/topology/core_siblings_list
-		/sys/devices/system/cpu/cpu#/topology/physical_package_id
-		/sys/devices/system/cpu/cpu#/topology/thread_siblings
-		/sys/devices/system/cpu/cpu#/topology/thread_siblings_list
+What:		/sys/devices/system/cpu/cpuX/topology/core_siblings
+		/sys/devices/system/cpu/cpuX/topology/core_siblings_list
+		/sys/devices/system/cpu/cpuX/topology/physical_package_id
+		/sys/devices/system/cpu/cpuX/topology/thread_siblings
+		/sys/devices/system/cpu/cpuX/topology/thread_siblings_list
+		/sys/devices/system/cpu/cpuX/topology/ppin
 Date:		December 2008
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	CPU topology files that describe a logical CPU's relationship
 		to other cores and threads in the same physical package.
 
-		One cpu# directory is created per logical CPU in the system,
+		One cpuX directory is created per logical CPU in the system,
 		e.g. /sys/devices/system/cpu/cpu42/.
 
 		Briefly, the files above are:
 
-		core_id: the CPU core ID of cpu#. Typically it is the
-		hardware platform's identifier (rather than the kernel's).
-		The actual value is architecture and platform dependent.
-
-		core_siblings: internal kernel map of cpu#'s hardware threads
+		core_siblings: internal kernel map of cpuX's hardware threads
 		within the same physical_package_id.
 
 		core_siblings_list: human-readable list of the logical CPU
-		numbers within the same physical_package_id as cpu#.
+		numbers within the same physical_package_id as cpuX.
 
-		physical_package_id: physical package id of cpu#. Typically
+		physical_package_id: physical package id of cpuX. Typically
 		corresponds to a physical socket number, but the actual value
 		is architecture and platform dependent.
 
-		thread_siblings: internal kernel map of cpu#'s hardware
-		threads within the same core as cpu#
+		thread_siblings: internal kernel map of cpuX's hardware
+		threads within the same core as cpuX
+
+		thread_siblings_list: human-readable list of cpuX's hardware
+		threads within the same core as cpuX
 
-		thread_siblings_list: human-readable list of cpu#'s hardware
-		threads within the same core as cpu#
+		ppin: human-readable Protected Processor Identification
+		Number of the socket the cpu# belongs to. There should be
+		one per physical_package_id. File is readable only to
+		admin.
 
 		See Documentation/admin-guide/cputopology.rst for more information.
 
@@ -135,7 +136,7 @@ Description:	Discover cpuidle policy and mechanism
 		Documentation/driver-api/pm/cpuidle.rst for more information.
 
 
-What:		/sys/devices/system/cpu/cpuX/cpuidle/stateN/name
+What:		/sys/devices/system/cpu/cpuX/cpuidle/state<N>/name
 		/sys/devices/system/cpu/cpuX/cpuidle/stateN/latency
 		/sys/devices/system/cpu/cpuX/cpuidle/stateN/power
 		/sys/devices/system/cpu/cpuX/cpuidle/stateN/time
@@ -174,7 +175,7 @@ Description:
 			      (a count).
 		======== ==== =================================================
 
-What:		/sys/devices/system/cpu/cpuX/cpuidle/stateN/desc
+What:		/sys/devices/system/cpu/cpuX/cpuidle/state<N>/desc
 Date:		February 2008
 KernelVersion:	v2.6.25
 Contact:	Linux power management list <linux-pm@vger.kernel.org>
@@ -182,7 +183,7 @@ Description:
 		(RO) A small description about the idle state (string).
 
 
-What:		/sys/devices/system/cpu/cpuX/cpuidle/stateN/disable
+What:		/sys/devices/system/cpu/cpuX/cpuidle/state<N>/disable
 Date:		March 2012
 KernelVersion:	v3.10
 Contact:	Linux power management list <linux-pm@vger.kernel.org>
@@ -195,14 +196,14 @@ Description:
 		does not reflect it. Likewise, if one enables a deep state but a
 		lighter state still is disabled, then this has no effect.
 
-What:		/sys/devices/system/cpu/cpuX/cpuidle/stateN/default_status
+What:		/sys/devices/system/cpu/cpuX/cpuidle/state<N>/default_status
 Date:		December 2019
 KernelVersion:	v5.6
 Contact:	Linux power management list <linux-pm@vger.kernel.org>
 Description:
 		(RO) The default status of this state, "enabled" or "disabled".
 
-What:		/sys/devices/system/cpu/cpuX/cpuidle/stateN/residency
+What:		/sys/devices/system/cpu/cpuX/cpuidle/state<N>/residency
 Date:		March 2014
 KernelVersion:	v3.15
 Contact:	Linux power management list <linux-pm@vger.kernel.org>
@@ -211,7 +212,7 @@ Description:
 		time (in microseconds) this cpu should spend in this idle state
 		to make the transition worth the effort.
 
-What:		/sys/devices/system/cpu/cpuX/cpuidle/stateN/s2idle/
+What:		/sys/devices/system/cpu/cpuX/cpuidle/state<N>/s2idle/
 Date:		March 2018
 KernelVersion:	v4.17
 Contact:	Linux power management list <linux-pm@vger.kernel.org>
@@ -221,7 +222,7 @@ Description:
 		This attribute group is only present for states that can be
 		used in suspend-to-idle with suspended timekeeping.
 
-What:		/sys/devices/system/cpu/cpuX/cpuidle/stateN/s2idle/time
+What:		/sys/devices/system/cpu/cpuX/cpuidle/state<N>/s2idle/time
 Date:		March 2018
 KernelVersion:	v4.17
 Contact:	Linux power management list <linux-pm@vger.kernel.org>
@@ -229,7 +230,7 @@ Description:
 		Total time spent by the CPU in suspend-to-idle (with scheduler
 		tick suspended) after requesting this state.
 
-What:		/sys/devices/system/cpu/cpuX/cpuidle/stateN/s2idle/usage
+What:		/sys/devices/system/cpu/cpuX/cpuidle/state<N>/s2idle/usage
 Date:		March 2018
 KernelVersion:	v4.17
 Contact:	Linux power management list <linux-pm@vger.kernel.org>
@@ -237,7 +238,7 @@ Description:
 		Total number of times this state has been requested by the CPU
 		while entering suspend-to-idle.
 
-What:		/sys/devices/system/cpu/cpu#/cpufreq/*
+What:		/sys/devices/system/cpu/cpuX/cpufreq/*
 Date:		pre-git history
 Contact:	linux-pm@vger.kernel.org
 Description:	Discover and change clock speed of CPUs
@@ -252,7 +253,7 @@ Description:	Discover and change clock speed of CPUs
 		See files in Documentation/cpu-freq/ for more information.
 
 
-What:		/sys/devices/system/cpu/cpu#/cpufreq/freqdomain_cpus
+What:		/sys/devices/system/cpu/cpuX/cpufreq/freqdomain_cpus
 Date:		June 2013
 Contact:	linux-pm@vger.kernel.org
 Description:	Discover CPUs in the same CPU frequency coordination domain
@@ -295,22 +296,22 @@ Description:	Processor frequency boosting control
 
 		This switch controls the boost setting for the whole system.
 		Boosting allows the CPU and the firmware to run at a frequency
-		beyond it's nominal limit.
+		beyond its nominal limit.
 
 		More details can be found in
 		Documentation/admin-guide/pm/cpufreq.rst
 
 
-What:		/sys/devices/system/cpu/cpu#/crash_notes
-		/sys/devices/system/cpu/cpu#/crash_notes_size
+What:		/sys/devices/system/cpu/cpuX/crash_notes
+		/sys/devices/system/cpu/cpuX/crash_notes_size
 Date:		April 2013
 Contact:	kexec@lists.infradead.org
 Description:	address and size of the percpu note.
 
 		crash_notes: the physical address of the memory that holds the
-		note of cpu#.
+		note of cpuX.
 
-		crash_notes_size: size of the note of cpu#.
+		crash_notes_size: size of the note of cpuX.
 
 
 What:		/sys/devices/system/cpu/intel_pstate/max_perf_pct
@@ -487,12 +488,13 @@ What:		/sys/devices/system/cpu/cpuX/regs/
 		/sys/devices/system/cpu/cpuX/regs/identification/
 		/sys/devices/system/cpu/cpuX/regs/identification/midr_el1
 		/sys/devices/system/cpu/cpuX/regs/identification/revidr_el1
+		/sys/devices/system/cpu/cpuX/regs/identification/smidr_el1
 Date:		June 2016
 Contact:	Linux ARM Kernel Mailing list <linux-arm-kernel@lists.infradead.org>
 Description:	AArch64 CPU registers
 
 		'identification' directory exposes the CPU ID registers for
-		identifying model and revision of the CPU.
+		identifying model and revision of the CPU and SMCU.
 
 What:		/sys/devices/system/cpu/aarch32_el0
 Date:		May 2021
@@ -503,12 +505,12 @@ Description:	Identifies the subset of CPUs in the system that can execute
 		If absent, then all or none of the CPUs can execute AArch32
 		applications and execve() will behave accordingly.
 
-What:		/sys/devices/system/cpu/cpu#/cpu_capacity
+What:		/sys/devices/system/cpu/cpuX/cpu_capacity
 Date:		December 2016
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	information about CPUs heterogeneity.
 
-		cpu_capacity: capacity of cpu#.
+		cpu_capacity: capacity of cpuX.
 
 What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/meltdown
@@ -520,6 +522,8 @@ What:		/sys/devices/system/cpu/vulnerabilities
 		/sys/devices/system/cpu/vulnerabilities/srbds
 		/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
 		/sys/devices/system/cpu/vulnerabilities/itlb_multihit
+		/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+		/sys/devices/system/cpu/vulnerabilities/retbleed
 Date:		January 2018
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Information about CPU vulnerabilities
@@ -560,7 +564,7 @@ Description:	Control Symmetric Multi Threading (SMT)
 			 If control status is "forceoff" or "notsupported" writes
 			 are rejected.
 
-What:		/sys/devices/system/cpu/cpu#/power/energy_perf_bias
+What:		/sys/devices/system/cpu/cpuX/power/energy_perf_bias
 Date:		March 2019
 Contact:	linux-pm@vger.kernel.org
 Description:	Intel Energy and Performance Bias Hint (EPB)
@@ -662,7 +666,23 @@ Description:	Preferred MTE tag checking mode
 
 		================  ==============================================
 		"sync"	  	  Prefer synchronous mode
+		"asymm"	  	  Prefer asymmetric mode
 		"async"	  	  Prefer asynchronous mode
 		================  ==============================================
 
 		See also: Documentation/arm64/memory-tagging-extension.rst
+
+What:		/sys/devices/system/cpu/nohz_full
+Date:		Apr 2015
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:
+		(RO) the list of CPUs that are in nohz_full mode.
+		These CPUs are set by boot parameter "nohz_full=".
+
+What:		/sys/devices/system/cpu/isolated
+Date:		Apr 2015
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:
+		(RO) the list of CPUs that are isolated and don't
+		participate in load balancing. These CPUs are set by
+		boot parameter "isolcpus=".
diff --git a/Documentation/ABI/testing/sysfs-devices-vfio-dev b/Documentation/ABI/testing/sysfs-devices-vfio-dev
new file mode 100644
index 000000000000..e21424fd9666
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-vfio-dev
@@ -0,0 +1,8 @@
+What:		 /sys/.../<device>/vfio-dev/vfioX/
+Date:		 September 2022
+Contact:	 Yi Liu <yi.l.liu@intel.com>
+Description:
+		 This directory is created when the device is bound to a
+		 vfio driver. The layout under this directory matches what
+		 exists for a standard 'struct device'. 'X' is a unique
+		 index marking this device in vfio.
diff --git a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
new file mode 100644
index 000000000000..910df0e5815a
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
@@ -0,0 +1,27 @@
+What:		/sys/bus/platform/drivers/aspeed-uart-routing/\*/uart\*
+Date:		September 2021
+Contact:	Oskar Senft <osk@google.com>
+		Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+Description:	Selects the RX source of the UARTx device.
+
+		When read, each file shows the list of available options with currently
+		selected option marked by brackets "[]". The list of available options
+		depends on the selected file.
+
+		e.g.
+		cat /sys/bus/platform/drivers/aspeed-uart-routing/\*.uart_routing/uart1
+		[io1] io2 io3 io4 uart2 uart3 uart4 io6
+
+		In this case, UART1 gets its input from IO1 (physical serial port 1).
+
+Users:		OpenBMC.  Proposed changes should be mailed to
+		openbmc@lists.ozlabs.org
+
+What:		/sys/bus/platform/drivers/aspeed-uart-routing/\*/io\*
+Date:		September 2021
+Contact:	Oskar Senft <osk@google.com>
+		Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+Description:	Selects the RX source of IOx serial port. The current selection
+		will be marked by brackets "[]".
+Users:		OpenBMC.  Proposed changes should be mailed to
+		openbmc@lists.ozlabs.org
diff --git a/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator b/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator
index 42214b4ff14a..90596d8bb51c 100644
--- a/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator
+++ b/Documentation/ABI/testing/sysfs-driver-bd9571mwv-regulator
@@ -26,6 +26,6 @@ Description:	Read/write the current state of DDR Backup Mode, which controls
 		     DDR Backup Mode must be explicitly enabled by the user,
 		     to invoke step 1.
 
-		See also Documentation/devicetree/bindings/mfd/bd9571mwv.txt.
+		See also Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml.
 Users:		User space applications for embedded boards equipped with a
 		BD9571MWV PMIC.
diff --git a/Documentation/ABI/testing/sysfs-driver-ccp b/Documentation/ABI/testing/sysfs-driver-ccp
new file mode 100644
index 000000000000..7aded9b75553
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-ccp
@@ -0,0 +1,87 @@
+What:		/sys/bus/pci/devices/<BDF>/fused_part
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	mario.limonciello@amd.com
+Description:
+		The /sys/bus/pci/devices/<BDF>/fused_part file reports
+		whether the CPU or APU has been fused to prevent tampering.
+		0: Not fused
+		1: Fused
+
+What:		/sys/bus/pci/devices/<BDF>/debug_lock_on
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	mario.limonciello@amd.com
+Description:
+		The /sys/bus/pci/devices/<BDF>/debug_lock_on reports
+		whether the AMD CPU or APU has been unlocked for debugging.
+		Possible values:
+		0: Not locked
+		1: Locked
+
+What:		/sys/bus/pci/devices/<BDF>/tsme_status
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	mario.limonciello@amd.com
+Description:
+		The /sys/bus/pci/devices/<BDF>/tsme_status file reports
+		the status of transparent secure memory encryption on AMD systems.
+		Possible values:
+		0: Not active
+		1: Active
+
+What:		/sys/bus/pci/devices/<BDF>/anti_rollback_status
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	mario.limonciello@amd.com
+Description:
+		The /sys/bus/pci/devices/<BDF>/anti_rollback_status file reports
+		whether the PSP is enforcing rollback protection.
+		Possible values:
+		0: Not enforcing
+		1: Enforcing
+
+What:		/sys/bus/pci/devices/<BDF>/rpmc_production_enabled
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	mario.limonciello@amd.com
+Description:
+		The /sys/bus/pci/devices/<BDF>/rpmc_production_enabled file reports
+		whether Replay Protected Monotonic Counter support has been enabled.
+		Possible values:
+		0: Not enabled
+		1: Enabled
+
+What:		/sys/bus/pci/devices/<BDF>/rpmc_spirom_available
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	mario.limonciello@amd.com
+Description:
+		The /sys/bus/pci/devices/<BDF>/rpmc_spirom_available file reports
+		whether an Replay Protected Monotonic Counter supported SPI is installed
+		on the system.
+		Possible values:
+		0: Not present
+		1: Present
+
+What:		/sys/bus/pci/devices/<BDF>/hsp_tpm_available
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	mario.limonciello@amd.com
+Description:
+		The /sys/bus/pci/devices/<BDF>/hsp_tpm_available file reports
+		whether the HSP TPM has been activated.
+		Possible values:
+		0: Not activated or present
+		1: Activated
+
+What:		/sys/bus/pci/devices/<BDF>/rom_armor_enforced
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	mario.limonciello@amd.com
+Description:
+		The /sys/bus/pci/devices/<BDF>/rom_armor_enforced file reports
+		whether RomArmor SPI protection is enforced.
+		Possible values:
+		0: Not enforced
+		1: Enforced
diff --git a/Documentation/ABI/testing/sysfs-driver-chromeos-acpi b/Documentation/ABI/testing/sysfs-driver-chromeos-acpi
new file mode 100644
index 000000000000..c308926e1568
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-chromeos-acpi
@@ -0,0 +1,137 @@
+What:		/sys/bus/platform/devices/GGL0001:*/BINF.2
+Date:		May 2022
+KernelVersion:	5.19
+Description:
+		Returns active EC firmware of current boot (boolean).
+
+		== ===============================
+		0  Read only (recovery) firmware.
+		1  Rewritable firmware.
+		== ===============================
+
+What:		/sys/bus/platform/devices/GGL0001:*/BINF.3
+Date:		May 2022
+KernelVersion:	5.19
+Description:
+		Returns main firmware type for current boot (integer).
+
+		== =====================================
+		0  Recovery.
+		1  Normal.
+		2  Developer.
+		3  Netboot (factory installation only).
+		== =====================================
+
+What:		/sys/bus/platform/devices/GGL0001:*/CHSW
+Date:		May 2022
+KernelVersion:	5.19
+Description:
+		Returns switch position for Chrome OS specific hardware
+		switches when the firmware is booted (integer).
+
+		==== ===========================================
+		0    No changes.
+		2    Recovery button was pressed.
+		4    Recovery button was pressed (EC firmware).
+		32   Developer switch was enabled.
+		512  Firmware write protection was disabled.
+		==== ===========================================
+
+What:		/sys/bus/platform/devices/GGL0001:*/FMAP
+Date:		May 2022
+KernelVersion:	5.19
+Description:
+		Returns physical memory address of the start of the main
+		processor firmware flashmap.
+
+What:		/sys/bus/platform/devices/GGL0001:*/FRID
+Date:		May 2022
+KernelVersion:	5.19
+Description:
+		Returns firmware version for the read-only portion of the
+		main processor firmware.
+
+What:		/sys/bus/platform/devices/GGL0001:*/FWID
+Date:		May 2022
+KernelVersion:	5.19
+Description:
+		Returns firmware version for the rewritable portion of the
+		main processor firmware.
+
+What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.0
+Date:		May 2022
+KernelVersion:	5.19
+Description:
+		Returns type of the GPIO signal for the Chrome OS specific
+		GPIO assignments (integer).
+
+		=========== ==================================
+		1           Recovery button.
+		2           Developer mode switch.
+		3           Firmware write protection switch.
+		256 to 511  Debug header GPIO 0 to GPIO 255.
+		=========== ==================================
+
+What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.1
+Date:		May 2022
+KernelVersion:	5.19
+Description:
+		Returns signal attributes of the GPIO signal (integer bitfield).
+
+		== =======================
+		0  Signal is active low.
+		1  Signal is active high.
+		== =======================
+
+What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.2
+Date:		May 2022
+KernelVersion:	5.19
+Description:
+		Returns the GPIO number on the specified GPIO
+		controller.
+
+What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.3
+Date:		May 2022
+KernelVersion:	5.19
+Description:
+		Returns name of the GPIO controller.
+
+What:		/sys/bus/platform/devices/GGL0001:*/HWID
+Date:		May 2022
+KernelVersion:	5.19
+Description:
+		Returns hardware ID for the Chromebook.
+
+What:		/sys/bus/platform/devices/GGL0001:*/MECK
+Date:		May 2022
+KernelVersion:	5.19
+Description:
+		Returns the SHA-1 or SHA-256 hash that is read out of the
+		Management Engine extended registers during boot. The hash
+		is exported via ACPI so the OS can verify that the Management
+		Engine firmware has not changed. If Management Engine is not
+		present, or if the firmware was unable to read the extended registers, this buffer size can be zero.
+
+What:		/sys/bus/platform/devices/GGL0001:*/VBNV.0
+Date:		May 2022
+KernelVersion:	5.19
+Description:
+		Returns offset in CMOS bank 0 of the verified boot non-volatile
+		storage block, counting from the first writable CMOS byte
+		(that is, 'offset = 0' is the byte following the 14 bytes of
+		clock data).
+
+What:		/sys/bus/platform/devices/GGL0001:*/VBNV.1
+Date:		May 2022
+KernelVersion:	5.19
+Description:
+		Return the size in bytes of the verified boot non-volatile
+		storage block.
+
+What:		/sys/bus/platform/devices/GGL0001:*/VDAT
+Date:		May 2022
+KernelVersion:	5.19
+Description:
+		Returns the verified boot data block shared between the
+		firmware verification step and the kernel verification step
+		(binary).
diff --git a/Documentation/ABI/testing/sysfs-driver-eud b/Documentation/ABI/testing/sysfs-driver-eud
new file mode 100644
index 000000000000..83f3872182a4
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-eud
@@ -0,0 +1,9 @@
+What:		/sys/bus/platform/drivers/eud/.../enable
+Date:           February 2022
+Contact:        Souradeep Chowdhury <quic_schowdhu@quicinc.com>
+Description:
+		The Enable/Disable sysfs interface for Embedded
+		USB Debugger(EUD). This enables and disables the
+		EUD based on a 1 or a 0 value. By enabling EUD,
+		the user is able to activate the mini-usb hub of
+		EUD for debug and trace capabilities.
diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs
index 1f127f71d2b4..1b98b6503b23 100644
--- a/Documentation/ABI/testing/sysfs-driver-habanalabs
+++ b/Documentation/ABI/testing/sysfs-driver-habanalabs
@@ -16,7 +16,7 @@ Description:    Version of the application running on the device's CPU
 
 What:           /sys/class/habanalabs/hl<n>/clk_max_freq_mhz
 Date:           Jun 2019
-KernelVersion:  not yet upstreamed
+KernelVersion:  5.7
 Contact:        ogabbay@kernel.org
 Description:    Allows the user to set the maximum clock frequency, in MHz.
                 The device clock might be set to lower value than the maximum.
@@ -26,7 +26,7 @@ Description:    Allows the user to set the maximum clock frequency, in MHz.
 
 What:           /sys/class/habanalabs/hl<n>/clk_cur_freq_mhz
 Date:           Jun 2019
-KernelVersion:  not yet upstreamed
+KernelVersion:  5.7
 Contact:        ogabbay@kernel.org
 Description:    Displays the current frequency, in MHz, of the device clock.
                 This property is valid only for the Gaudi ASIC family
@@ -69,6 +69,12 @@ KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Displays the device's version from the eFuse
 
+What:           /sys/class/habanalabs/hl<n>/fw_os_ver
+Date:           Dec 2021
+KernelVersion:  5.18
+Contact:        ogabbay@kernel.org
+Description:    Version of the firmware OS running on the device's CPU
+
 What:           /sys/class/habanalabs/hl<n>/hard_reset
 Date:           Jan 2019
 KernelVersion:  5.1
@@ -115,7 +121,7 @@ What:           /sys/class/habanalabs/hl<n>/infineon_ver
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
-Description:    Version of the Device's power supply F/W code
+Description:    Version of the Device's power supply F/W code. Relevant only to GOYA and GAUDI
 
 What:           /sys/class/habanalabs/hl<n>/max_power
 Date:           Jan 2019
@@ -170,6 +176,12 @@ KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
 Description:    Version of the device's preboot F/W code
 
+What:           /sys/class/habanalabs/hl<n>/security_enabled
+Date:           Oct 2022
+KernelVersion:  6.1
+Contact:        obitton@habana.ai
+Description:    Displays the device's security status
+
 What:           /sys/class/habanalabs/hl<n>/soft_reset
 Date:           Jan 2019
 KernelVersion:  5.1
@@ -189,7 +201,19 @@ What:           /sys/class/habanalabs/hl<n>/status
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
-Description:    Status of the card: "Operational", "Malfunction", "In reset".
+Description:    Status of the card:
+
+                  * "operational" - Device is available for work.
+                  * "in reset" - Device is going through reset, will be
+                    available shortly.
+                  * "disabled" - Device is not usable.
+                  * "needs reset" - Device is not usable until a hard reset
+                    is initiated.
+                  * "in device creation" - Device is not available yet, as it
+                    is still initializing.
+                  * "in reset after device release" - Device is going through
+                    a compute-reset which is executed after a device release
+                    (relevant for Gaudi2 only).
 
 What:           /sys/class/habanalabs/hl<n>/thermal_ver
 Date:           Jan 2019
@@ -220,4 +244,10 @@ What:           /sys/class/habanalabs/hl<n>/uboot_ver
 Date:           Jan 2019
 KernelVersion:  5.1
 Contact:        ogabbay@kernel.org
-Description:    Version of the u-boot running on the device's CPU
-\ No newline at end of file
+Description:    Version of the u-boot running on the device's CPU
+
+What:           /sys/class/habanalabs/hl<n>/vrm_ver
+Date:           Jan 2022
+KernelVersion:  5.17
+Contact:        ogabbay@kernel.org
+Description:    Version of the Device's Voltage Regulator Monitor F/W code. N/A to GOYA and GAUDI
diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
new file mode 100644
index 000000000000..8d7d8f05f6cd
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -0,0 +1,77 @@
+What:		/sys/devices/.../hwmon/hwmon<i>/in0_input
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	intel-gfx@lists.freedesktop.org
+Description:	RO. Current Voltage in millivolt.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_max
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	intel-gfx@lists.freedesktop.org
+Description:	RW. Card reactive sustained  (PL1/Tau) power limit in microwatts.
+
+		The power controller will throttle the operating frequency
+		if the power averaged over a window (typically seconds)
+		exceeds this limit. A read value of 0 means that the PL1
+		power limit is disabled, writing 0 disables the
+		limit. Writing values > 0 will enable the power limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_rated_max
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	intel-gfx@lists.freedesktop.org
+Description:	RO. Card default power limit (default TDP setting).
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	intel-gfx@lists.freedesktop.org
+Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
+		milliseconds over which sustained power is averaged.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	intel-gfx@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in microwatts.
+
+		Card reactive critical (I1) power limit in microwatts is exposed
+		for client products. The power controller will throttle the
+		operating frequency if the power averaged over a window exceeds
+		this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	intel-gfx@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in milliamperes.
+
+		Card reactive critical (I1) power limit in milliamperes is
+		exposed for server products. The power controller will throttle
+		the operating frequency if the power averaged over a window
+		exceeds this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	intel-gfx@lists.freedesktop.org
+Description:	RO. Energy input of device or gt in microjoules.
+
+		For i915 device level hwmon devices (name "i915") this
+		reflects energy input for the entire device. For gt level
+		hwmon devices (name "i915_gtN") this reflects energy input
+		for the gt.
+
+		Only supported for particular Intel i915 graphics platforms.
diff --git a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
index 9773925138af..a8ab58035c95 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
+++ b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
@@ -1,4 +1,4 @@
-What:		/sys/bus/spi/devices/.../bmc_version
+What:		/sys/bus/.../drivers/intel-m10-bmc/.../bmc_version
 Date:		June 2020
 KernelVersion:	5.10
 Contact:	Xu Yilun <yilun.xu@intel.com>
@@ -6,7 +6,7 @@ Description:	Read only. Returns the hardware build version of Intel
 		MAX10 BMC chip.
 		Format: "0x%x".
 
-What:		/sys/bus/spi/devices/.../bmcfw_version
+What:		/sys/bus/.../drivers/intel-m10-bmc/.../bmcfw_version
 Date:		June 2020
 KernelVersion:	5.10
 Contact:	Xu Yilun <yilun.xu@intel.com>
@@ -14,7 +14,7 @@ Description:	Read only. Returns the firmware version of Intel MAX10
 		BMC chip.
 		Format: "0x%x".
 
-What:		/sys/bus/spi/devices/.../mac_address
+What:		/sys/bus/.../drivers/intel-m10-bmc/.../mac_address
 Date:		January 2021
 KernelVersion:  5.12
 Contact:	Russ Weight <russell.h.weight@intel.com>
@@ -25,7 +25,7 @@ Description:	Read only. Returns the first MAC address in a block
 		space.
 		Format: "%02x:%02x:%02x:%02x:%02x:%02x".
 
-What:		/sys/bus/spi/devices/.../mac_count
+What:		/sys/bus/.../drivers/intel-m10-bmc/.../mac_count
 Date:		January 2021
 KernelVersion:  5.12
 Contact:	Russ Weight <russell.h.weight@intel.com>
diff --git a/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update
new file mode 100644
index 000000000000..0a41afe0ab4c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update
@@ -0,0 +1,61 @@
+What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/sr_root_entry_hash
+Date:		Sep 2022
+KernelVersion:	5.20
+Contact:	Russ Weight <russell.h.weight@intel.com>
+Description:	Read only. Returns the root entry hash for the static
+		region if one is programmed, else it returns the
+		string: "hash not programmed".  This file is only
+		visible if the underlying device supports it.
+		Format: string.
+
+What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/pr_root_entry_hash
+Date:		Sep 2022
+KernelVersion:	5.20
+Contact:	Russ Weight <russell.h.weight@intel.com>
+Description:	Read only. Returns the root entry hash for the partial
+		reconfiguration region if one is programmed, else it
+		returns the string: "hash not programmed".  This file
+		is only visible if the underlying device supports it.
+		Format: string.
+
+What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/bmc_root_entry_hash
+Date:		Sep 2022
+KernelVersion:	5.20
+Contact:	Russ Weight <russell.h.weight@intel.com>
+Description:	Read only. Returns the root entry hash for the BMC image
+		if one is programmed, else it returns the string:
+		"hash not programmed".  This file is only visible if the
+		underlying device supports it.
+		Format: string.
+
+What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/sr_canceled_csks
+Date:		Sep 2022
+KernelVersion:	5.20
+Contact:	Russ Weight <russell.h.weight@intel.com>
+Description:	Read only. Returns a list of indices for canceled code
+		signing keys for the static region. The standard bitmap
+		list format is used (e.g. "1,2-6,9").
+
+What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/pr_canceled_csks
+Date:		Sep 2022
+KernelVersion:	5.20
+Contact:	Russ Weight <russell.h.weight@intel.com>
+Description:	Read only. Returns a list of indices for canceled code
+		signing keys for the partial reconfiguration region. The
+		standard bitmap list format is used (e.g. "1,2-6,9").
+
+What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/bmc_canceled_csks
+Date:		Sep 2022
+KernelVersion:	5.20
+Contact:	Russ Weight <russell.h.weight@intel.com>
+Description:	Read only. Returns a list of indices for canceled code
+		signing keys for the BMC.  The standard bitmap list format
+		is used (e.g. "1,2-6,9").
+
+What:		/sys/bus/platform/drivers/intel-m10bmc-sec-update/.../security/flash_count
+Date:		Sep 2022
+KernelVersion:	5.20
+Contact:	Russ Weight <russell.h.weight@intel.com>
+Description:	Read only. Returns number of times the secure update
+		staging area has been flashed.
+		Format: "%u".
diff --git a/Documentation/ABI/testing/sysfs-driver-intel_sdsi b/Documentation/ABI/testing/sysfs-driver-intel_sdsi
new file mode 100644
index 000000000000..f8afed127107
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-intel_sdsi
@@ -0,0 +1,90 @@
+What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X
+Date:		Feb 2022
+KernelVersion:	5.18
+Contact:	"David E. Box" <david.e.box@linux.intel.com>
+Description:
+		This directory contains interface files for accessing Intel
+		On Demand (formerly Software Defined Silicon or SDSi) features
+		on a CPU. X represents the socket instance (though not the
+		socket ID). The socket ID is determined by reading the
+		registers file and decoding it per the specification.
+
+		Some files communicate with On Demand hardware through a
+		mailbox. Should the operation fail, one of the following error
+		codes may be returned:
+
+		==========	=====
+		Error Code	Cause
+		==========	=====
+		EIO		General mailbox failure. Log may indicate cause.
+		EBUSY		Mailbox is owned by another agent.
+		EPERM		On Demand capability is not enabled in hardware.
+		EPROTO		Failure in mailbox protocol detected by driver.
+				See log for details.
+		EOVERFLOW	For provision commands, the size of the data
+				exceeds what may be written.
+		ESPIPE		Seeking is not allowed.
+		ETIMEDOUT	Failure to complete mailbox transaction in time.
+		==========	=====
+
+What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X/guid
+Date:		Feb 2022
+KernelVersion:	5.18
+Contact:	"David E. Box" <david.e.box@linux.intel.com>
+Description:
+		(RO) The GUID for the registers file. The GUID identifies
+		the layout of the registers file in this directory.
+		Information about the register layouts for a particular GUID
+		is available at http://github.com/intel/intel-sdsi
+
+What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X/registers
+Date:		Feb 2022
+KernelVersion:	5.18
+Contact:	"David E. Box" <david.e.box@linux.intel.com>
+Description:
+		(RO) Contains information needed by applications to provision
+		a CPU and monitor status information. The layout of this file
+		is determined by the GUID in this directory. Information about
+		the layout for a particular GUID is available at
+		http://github.com/intel/intel-sdsi
+
+What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X/provision_akc
+Date:		Feb 2022
+KernelVersion:	5.18
+Contact:	"David E. Box" <david.e.box@linux.intel.com>
+Description:
+		(WO) Used to write an Authentication Key Certificate (AKC) to
+		the On Demand NVRAM for the CPU. The AKC is used to authenticate
+		a Capability Activation Payload. Mailbox command.
+
+What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X/provision_cap
+Date:		Feb 2022
+KernelVersion:	5.18
+Contact:	"David E. Box" <david.e.box@linux.intel.com>
+Description:
+		(WO) Used to write a Capability Activation Payload (CAP) to the
+		On Demand NVRAM for the CPU. CAPs are used to activate a given
+		CPU feature. A CAP is validated by On Demand hardware using a
+		previously provisioned AKC file. Upon successful authentication,
+		the CPU configuration is updated. A cold reboot is required to
+		fully activate the feature. Mailbox command.
+
+What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X/meter_certificate
+Date:		Nov 2022
+KernelVersion:	6.2
+Contact:	"David E. Box" <david.e.box@linux.intel.com>
+Description:
+		(RO) Used to read back the current meter certificate for the CPU
+		from Intel On Demand hardware. The meter certificate contains
+		utilization metrics of On Demand enabled features. Mailbox
+		command.
+
+What:		/sys/bus/auxiliary/devices/intel_vsec.sdsi.X/state_certificate
+Date:		Feb 2022
+KernelVersion:	5.18
+Contact:	"David E. Box" <david.e.box@linux.intel.com>
+Description:
+		(RO) Used to read back the current state certificate for the CPU
+		from On Demand hardware. The state certificate contains
+		information about the current licenses on the CPU. Mailbox
+		command.
diff --git a/Documentation/ABI/testing/sysfs-driver-qat b/Documentation/ABI/testing/sysfs-driver-qat
new file mode 100644
index 000000000000..087842b1969e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-qat
@@ -0,0 +1,49 @@
+What:		/sys/bus/pci/devices/<BDF>/qat/state
+Date:		June 2022
+KernelVersion:	6.0
+Contact:	qat-linux@intel.com
+Description:	(RW) Reports the current state of the QAT device. Write to
+		the file to start or stop the device.
+
+		The values are:
+
+		* up: the device is up and running
+		* down: the device is down
+
+
+		It is possible to transition the device from up to down only
+		if the device is up and vice versa.
+
+		This attribute is only available for qat_4xxx devices.
+
+What:		/sys/bus/pci/devices/<BDF>/qat/cfg_services
+Date:		June 2022
+KernelVersion:	6.0
+Contact:	qat-linux@intel.com
+Description:	(RW) Reports the current configuration of the QAT device.
+		Write to the file to change the configured services.
+
+		The values are:
+
+		* sym;asym: the device is configured for running crypto
+		  services
+		* dc: the device is configured for running compression services
+
+		It is possible to set the configuration only if the device
+		is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state)
+
+		The following example shows how to change the configuration of
+		a device configured for running crypto services in order to
+		run data compression::
+
+			# cat /sys/bus/pci/devices/<BDF>/qat/state
+			up
+			# cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
+			sym;asym
+			# echo down > /sys/bus/pci/devices/<BDF>/qat/state
+			# echo dc > /sys/bus/pci/devices/<BDF>/qat/cfg_services
+			# echo up > /sys/bus/pci/devices/<BDF>/qat/state
+			# cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
+			dc
+
+		This attribute is only available for qat_4xxx devices.
diff --git a/Documentation/ABI/testing/sysfs-driver-typec-displayport b/Documentation/ABI/testing/sysfs-driver-typec-displayport
index 231471ad0d4b..256c87c5219a 100644
--- a/Documentation/ABI/testing/sysfs-driver-typec-displayport
+++ b/Documentation/ABI/testing/sysfs-driver-typec-displayport
@@ -47,3 +47,18 @@ Description:
 		USB SuperSpeed protocol. From user perspective pin assignments C
 		and E are equal, where all channels on the connector are used
 		for carrying DisplayPort protocol (allowing higher resolutions).
+
+What:		/sys/bus/typec/devices/.../displayport/hpd
+Date:		Dec 2022
+Contact:	Badhri Jagan Sridharan <badhri@google.com>
+Description:
+		VESA DisplayPort Alt Mode on USB Type-C Standard defines how
+		HotPlugDetect(HPD) shall be supported on the USB-C connector when
+		operating in DisplayPort Alt Mode. This is a read only node which
+		reflects the current state of HPD.
+
+		Valid values:
+			- 1: when HPD’s logical state is high (HPD_High) as defined
+			     by VESA DisplayPort Alt Mode on USB Type-C Standard.
+			- 0 when HPD’s logical state is low (HPD_Low) as defined by
+			     VESA DisplayPort Alt Mode on USB Type-C Standard.
diff --git a/Documentation/ABI/testing/sysfs-driver-uacce b/Documentation/ABI/testing/sysfs-driver-uacce
index 08f2591138af..d3f0b8f3c589 100644
--- a/Documentation/ABI/testing/sysfs-driver-uacce
+++ b/Documentation/ABI/testing/sysfs-driver-uacce
@@ -19,6 +19,24 @@ Contact:        linux-accelerators@lists.ozlabs.org
 Description:    Available instances left of the device
                 Return -ENODEV if uacce_ops get_available_instances is not provided
 
+What:           /sys/class/uacce/<dev_name>/isolate_strategy
+Date:           Nov 2022
+KernelVersion:  6.1
+Contact:        linux-accelerators@lists.ozlabs.org
+Description:    (RW) A sysfs node that configure the error threshold for the hardware
+                isolation strategy. This size is a configured integer value, which is the
+                number of threshold for hardware errors occurred in one hour. The default is 0.
+                0 means never isolate the device. The maximum value is 65535. You can write
+                a number of threshold based on your hardware.
+
+What:           /sys/class/uacce/<dev_name>/isolate
+Date:           Nov 2022
+KernelVersion:  6.1
+Contact:        linux-accelerators@lists.ozlabs.org
+Description:    (R) A sysfs node that read the device isolated state. The value 1
+                means the device is unavailable. The 0 means the device is
+                available.
+
 What:           /sys/class/uacce/<dev_name>/algorithms
 Date:           Feb 2020
 KernelVersion:  5.7
diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
index ec3a7149ced5..228aa43e14ed 100644
--- a/Documentation/ABI/testing/sysfs-driver-ufs
+++ b/Documentation/ABI/testing/sysfs-driver-ufs
@@ -13,6 +13,7 @@ Description:
 		Interface specification for more details.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_type
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/device_type
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the device type. This is one of the UFS
@@ -22,6 +23,7 @@ Description:	This file shows the device type. This is one of the UFS
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_class
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/device_class
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the device class. This is one of the UFS
@@ -31,6 +33,7 @@ Description:	This file shows the device class. This is one of the UFS
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_sub_class
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/device_sub_class
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the UFS storage subclass. This is one of
@@ -40,6 +43,7 @@ Description:	This file shows the UFS storage subclass. This is one of
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/protocol
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/protocol
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the protocol supported by an UFS device.
@@ -50,6 +54,7 @@ Description:	This file shows the protocol supported by an UFS device.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_luns
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/number_of_luns
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows number of logical units. This is one of
@@ -59,6 +64,7 @@ Description:	This file shows number of logical units. This is one of
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_wluns
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/number_of_wluns
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows number of well known logical units.
@@ -69,6 +75,7 @@ Description:	This file shows number of well known logical units.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/boot_enable
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/boot_enable
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows value that indicates whether the device is
@@ -79,6 +86,7 @@ Description:	This file shows value that indicates whether the device is
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/descriptor_access_enable
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/descriptor_access_enable
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows value that indicates whether the device
@@ -90,6 +98,7 @@ Description:	This file shows value that indicates whether the device
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_power_mode
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/initial_power_mode
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows value that defines the power mode after
@@ -100,6 +109,7 @@ Description:	This file shows value that defines the power mode after
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/high_priority_lun
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/high_priority_lun
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the high priority lun. This is one of
@@ -109,6 +119,7 @@ Description:	This file shows the high priority lun. This is one of
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/secure_removal_type
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/secure_removal_type
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the secure removal type. This is one of
@@ -118,6 +129,7 @@ Description:	This file shows the secure removal type. This is one of
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/support_security_lun
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/support_security_lun
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows whether the security lun is supported.
@@ -128,6 +140,7 @@ Description:	This file shows whether the security lun is supported.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/bkops_termination_latency
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/bkops_termination_latency
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the background operations termination
@@ -138,6 +151,7 @@ Description:	This file shows the background operations termination
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/initial_active_icc_level
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/initial_active_icc_level
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the initial active ICC level. This is one
@@ -147,6 +161,7 @@ Description:	This file shows the initial active ICC level. This is one
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/specification_version
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/specification_version
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the specification version. This is one
@@ -156,6 +171,7 @@ Description:	This file shows the specification version. This is one
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturing_date
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/manufacturing_date
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the manufacturing date in BCD format.
@@ -166,6 +182,7 @@ Description:	This file shows the manufacturing date in BCD format.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/manufacturer_id
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/manufacturer_id
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the manufacturer ID. This is one of the
@@ -175,6 +192,7 @@ Description:	This file shows the manufacturer ID. This is one of the
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtt_capability
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/rtt_capability
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the maximum number of outstanding RTTs
@@ -185,6 +203,7 @@ Description:	This file shows the maximum number of outstanding RTTs
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/rtc_update
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/rtc_update
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the frequency and method of the realtime
@@ -195,6 +214,7 @@ Description:	This file shows the frequency and method of the realtime
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/ufs_features
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/ufs_features
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows which features are supported by the device.
@@ -205,6 +225,7 @@ Description:	This file shows which features are supported by the device.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/ffu_timeout
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/ffu_timeout
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the FFU timeout. This is one of the
@@ -214,6 +235,7 @@ Description:	This file shows the FFU timeout. This is one of the
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/queue_depth
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/queue_depth
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the device queue depth. This is one of the
@@ -223,6 +245,7 @@ Description:	This file shows the device queue depth. This is one of the
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/device_version
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/device_version
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the device version. This is one of the
@@ -232,6 +255,7 @@ Description:	This file shows the device version. This is one of the
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/number_of_secure_wpa
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/number_of_secure_wpa
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows number of secure write protect areas
@@ -242,6 +266,7 @@ Description:	This file shows number of secure write protect areas
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_max_data_size
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/psa_max_data_size
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the maximum amount of data that may be
@@ -253,6 +278,7 @@ Description:	This file shows the maximum amount of data that may be
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/psa_state_timeout
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/psa_state_timeout
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the command maximum timeout for a change
@@ -264,6 +290,7 @@ Description:	This file shows the command maximum timeout for a change
 
 
 What:		/sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/unipro_version
+What:		/sys/bus/platform/devices/*.ufs/interconnect_descriptor/unipro_version
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the MIPI UniPro version number in BCD format.
@@ -274,6 +301,7 @@ Description:	This file shows the MIPI UniPro version number in BCD format.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/interconnect_descriptor/mphy_version
+What:		/sys/bus/platform/devices/*.ufs/interconnect_descriptor/mphy_version
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the MIPI M-PHY version number in BCD format.
@@ -285,6 +313,7 @@ Description:	This file shows the MIPI M-PHY version number in BCD format.
 
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/raw_device_capacity
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/raw_device_capacity
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the total memory quantity available to
@@ -296,6 +325,7 @@ Description:	This file shows the total memory quantity available to
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_luns
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/max_number_of_luns
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the maximum number of logical units
@@ -306,6 +336,7 @@ Description:	This file shows the maximum number of logical units
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/segment_size
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/segment_size
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the segment size. This is one of the UFS
@@ -315,6 +346,7 @@ Description:	This file shows the segment size. This is one of the UFS
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/allocation_unit_size
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/allocation_unit_size
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the allocation unit size. This is one of
@@ -324,6 +356,7 @@ Description:	This file shows the allocation unit size. This is one of
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/min_addressable_block_size
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/min_addressable_block_size
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the minimum addressable block size. This
@@ -334,6 +367,7 @@ Description:	This file shows the minimum addressable block size. This
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_read_block_size
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/optimal_read_block_size
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the optimal read block size. This is one
@@ -344,6 +378,7 @@ Description:	This file shows the optimal read block size. This is one
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/optimal_write_block_size
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/optimal_write_block_size
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the optimal write block size. This is one
@@ -354,6 +389,7 @@ Description:	This file shows the optimal write block size. This is one
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_in_buffer_size
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/max_in_buffer_size
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the maximum data-in buffer size. This
@@ -364,6 +400,7 @@ Description:	This file shows the maximum data-in buffer size. This
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_out_buffer_size
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/max_out_buffer_size
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the maximum data-out buffer size. This
@@ -374,6 +411,7 @@ Description:	This file shows the maximum data-out buffer size. This
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/rpmb_rw_size
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/rpmb_rw_size
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the maximum number of RPMB frames allowed
@@ -384,6 +422,7 @@ Description:	This file shows the maximum number of RPMB frames allowed
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/dyn_capacity_resource_policy
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/dyn_capacity_resource_policy
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the dynamic capacity resource policy. This
@@ -394,6 +433,7 @@ Description:	This file shows the dynamic capacity resource policy. This
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/data_ordering
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/data_ordering
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows support for out-of-order data transfer.
@@ -404,6 +444,7 @@ Description:	This file shows support for out-of-order data transfer.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/max_number_of_contexts
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/max_number_of_contexts
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows maximum available number of contexts which
@@ -414,6 +455,7 @@ Description:	This file shows maximum available number of contexts which
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_unit_size
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/sys_data_tag_unit_size
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows system data tag unit size. This is one of
@@ -423,6 +465,7 @@ Description:	This file shows system data tag unit size. This is one of
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/sys_data_tag_resource_size
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/sys_data_tag_resource_size
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows maximum storage area size allocated by
@@ -434,6 +477,7 @@ Description:	This file shows maximum storage area size allocated by
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/secure_removal_types
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/secure_removal_types
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows supported secure removal types. This is
@@ -444,6 +488,7 @@ Description:	This file shows supported secure removal types. This is
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/memory_types
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/memory_types
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows supported memory types. This is one of
@@ -454,6 +499,7 @@ Description:	This file shows supported memory types. This is one of
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_max_alloc_units
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/*_memory_max_alloc_units
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the maximum number of allocation units for
@@ -465,6 +511,7 @@ Description:	This file shows the maximum number of allocation units for
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/*_memory_capacity_adjustment_factor
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/*_memory_capacity_adjustment_factor
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the memory capacity adjustment factor for
@@ -477,6 +524,7 @@ Description:	This file shows the memory capacity adjustment factor for
 
 
 What:		/sys/bus/platform/drivers/ufshcd/*/health_descriptor/eol_info
+What:		/sys/bus/platform/devices/*.ufs/health_descriptor/eol_info
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows preend of life information. This is one
@@ -487,6 +535,7 @@ Description:	This file shows preend of life information. This is one
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_a
+What:		/sys/bus/platform/devices/*.ufs/health_descriptor/life_time_estimation_a
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows indication of the device life time
@@ -497,6 +546,7 @@ Description:	This file shows indication of the device life time
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/health_descriptor/life_time_estimation_b
+What:		/sys/bus/platform/devices/*.ufs/health_descriptor/life_time_estimation_b
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows indication of the device life time
@@ -508,6 +558,7 @@ Description:	This file shows indication of the device life time
 
 
 What:		/sys/bus/platform/drivers/ufshcd/*/power_descriptor/active_icc_levels_vcc*
+What:		/sys/bus/platform/devices/*.ufs/power_descriptor/active_icc_levels_vcc*
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows maximum VCC, VCCQ and VCCQ2 value for
@@ -519,6 +570,7 @@ Description:	This file shows maximum VCC, VCCQ and VCCQ2 value for
 
 
 What:		/sys/bus/platform/drivers/ufshcd/*/string_descriptors/manufacturer_name
+What:		/sys/bus/platform/devices/*.ufs/string_descriptors/manufacturer_name
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file contains a device manufacturer name string.
@@ -528,6 +580,7 @@ Description:	This file contains a device manufacturer name string.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_name
+What:		/sys/bus/platform/devices/*.ufs/string_descriptors/product_name
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file contains a product name string. The full information
@@ -536,6 +589,7 @@ Description:	This file contains a product name string. The full information
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/string_descriptors/oem_id
+What:		/sys/bus/platform/devices/*.ufs/string_descriptors/oem_id
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file contains a OEM ID string. The full information
@@ -544,6 +598,7 @@ Description:	This file contains a OEM ID string. The full information
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/string_descriptors/serial_number
+What:		/sys/bus/platform/devices/*.ufs/string_descriptors/serial_number
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file contains a device serial number string. The full
@@ -553,6 +608,7 @@ Description:	This file contains a device serial number string. The full
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/string_descriptors/product_revision
+What:		/sys/bus/platform/devices/*.ufs/string_descriptors/product_revision
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file contains a product revision string. The full
@@ -684,6 +740,7 @@ Description:	This file shows the granularity of the LUN. This is one of
 
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/device_init
+What:		/sys/bus/platform/devices/*.ufs/flags/device_init
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the device init status. The full information
@@ -692,6 +749,7 @@ Description:	This file shows the device init status. The full information
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/permanent_wpe
+What:		/sys/bus/platform/devices/*.ufs/flags/permanent_wpe
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows whether permanent write protection is enabled.
@@ -701,6 +759,7 @@ Description:	This file shows whether permanent write protection is enabled.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/power_on_wpe
+What:		/sys/bus/platform/devices/*.ufs/flags/power_on_wpe
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows whether write protection is enabled on all
@@ -711,6 +770,7 @@ Description:	This file shows whether write protection is enabled on all
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/bkops_enable
+What:		/sys/bus/platform/devices/*.ufs/flags/bkops_enable
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows whether the device background operations are
@@ -720,6 +780,7 @@ Description:	This file shows whether the device background operations are
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/life_span_mode_enable
+What:		/sys/bus/platform/devices/*.ufs/flags/life_span_mode_enable
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows whether the device life span mode is enabled.
@@ -729,6 +790,7 @@ Description:	This file shows whether the device life span mode is enabled.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/phy_resource_removal
+What:		/sys/bus/platform/devices/*.ufs/flags/phy_resource_removal
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows whether physical resource removal is enable.
@@ -738,6 +800,7 @@ Description:	This file shows whether physical resource removal is enable.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/busy_rtc
+What:		/sys/bus/platform/devices/*.ufs/flags/busy_rtc
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows whether the device is executing internal
@@ -747,6 +810,7 @@ Description:	This file shows whether the device is executing internal
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/disable_fw_update
+What:		/sys/bus/platform/devices/*.ufs/flags/disable_fw_update
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows whether the device FW update is permanently
@@ -757,6 +821,7 @@ Description:	This file shows whether the device FW update is permanently
 
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/boot_lun_enabled
+What:		/sys/bus/platform/devices/*.ufs/attributes/boot_lun_enabled
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the boot lun enabled UFS device attribute.
@@ -766,6 +831,7 @@ Description:	This file provides the boot lun enabled UFS device attribute.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/current_power_mode
+What:		/sys/bus/platform/devices/*.ufs/attributes/current_power_mode
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the current power mode UFS device attribute.
@@ -775,6 +841,7 @@ Description:	This file provides the current power mode UFS device attribute.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/active_icc_level
+What:		/sys/bus/platform/devices/*.ufs/attributes/active_icc_level
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the active icc level UFS device attribute.
@@ -784,6 +851,7 @@ Description:	This file provides the active icc level UFS device attribute.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/ooo_data_enabled
+What:		/sys/bus/platform/devices/*.ufs/attributes/ooo_data_enabled
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the out of order data transfer enabled UFS
@@ -793,6 +861,7 @@ Description:	This file provides the out of order data transfer enabled UFS
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/bkops_status
+What:		/sys/bus/platform/devices/*.ufs/attributes/bkops_status
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the background operations status UFS device
@@ -802,6 +871,7 @@ Description:	This file provides the background operations status UFS device
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/purge_status
+What:		/sys/bus/platform/devices/*.ufs/attributes/purge_status
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the purge operation status UFS device
@@ -811,6 +881,7 @@ Description:	This file provides the purge operation status UFS device
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/max_data_in_size
+What:		/sys/bus/platform/devices/*.ufs/attributes/max_data_in_size
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the maximum data size in a DATA IN
@@ -820,6 +891,7 @@ Description:	This file shows the maximum data size in a DATA IN
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/max_data_out_size
+What:		/sys/bus/platform/devices/*.ufs/attributes/max_data_out_size
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the maximum number of bytes that can be
@@ -829,6 +901,7 @@ Description:	This file shows the maximum number of bytes that can be
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/reference_clock_frequency
+What:		/sys/bus/platform/devices/*.ufs/attributes/reference_clock_frequency
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the reference clock frequency UFS device
@@ -838,6 +911,7 @@ Description:	This file provides the reference clock frequency UFS device
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/configuration_descriptor_lock
+What:		/sys/bus/platform/devices/*.ufs/attributes/configuration_descriptor_lock
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows whether the configuration descriptor is locked.
@@ -845,6 +919,7 @@ Description:	This file shows whether the configuration descriptor is locked.
 		UFS specifications 2.1. The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/max_number_of_rtt
+What:		/sys/bus/platform/devices/*.ufs/attributes/max_number_of_rtt
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the maximum current number of
@@ -855,6 +930,7 @@ Description:	This file provides the maximum current number of
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_control
+What:		/sys/bus/platform/devices/*.ufs/attributes/exception_event_control
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the exception event control UFS device
@@ -864,6 +940,7 @@ Description:	This file provides the exception event control UFS device
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/exception_event_status
+What:		/sys/bus/platform/devices/*.ufs/attributes/exception_event_status
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the exception event status UFS device
@@ -873,6 +950,7 @@ Description:	This file provides the exception event status UFS device
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/ffu_status
+What:		/sys/bus/platform/devices/*.ufs/attributes/ffu_status
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file provides the ffu status UFS device attribute.
@@ -882,6 +960,7 @@ Description:	This file provides the ffu status UFS device attribute.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/psa_state
+What:		/sys/bus/platform/devices/*.ufs/attributes/psa_state
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file show the PSA feature status. The full information
@@ -890,6 +969,7 @@ Description:	This file show the PSA feature status. The full information
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/psa_data_size
+What:		/sys/bus/platform/devices/*.ufs/attributes/psa_data_size
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
 Description:	This file shows the amount of data that the host plans to
@@ -903,7 +983,7 @@ Description:	This file shows the amount of data that the host plans to
 What:		/sys/class/scsi_device/*/device/dyn_cap_needed
 Date:		February 2018
 Contact:	Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
-Description:	This file shows the The amount of physical memory needed
+Description:	This file shows the amount of physical memory needed
 		to be removed from the physical memory resources pool of
 		the particular logical unit. The full information about
 		the attribute could be found at UFS specifications 2.1.
@@ -912,6 +992,7 @@ Description:	This file shows the The amount of physical memory needed
 
 
 What:		/sys/bus/platform/drivers/ufshcd/*/rpm_lvl
+What:		/sys/bus/platform/devices/*.ufs/rpm_lvl
 Date:		September 2014
 Contact:	Subhash Jadavani <subhashj@codeaurora.org>
 Description:	This entry could be used to set or show the UFS device
@@ -938,6 +1019,7 @@ Description:	This entry could be used to set or show the UFS device
 		==  ====================================================
 
 What:		/sys/bus/platform/drivers/ufshcd/*/rpm_target_dev_state
+What:		/sys/bus/platform/devices/*.ufs/rpm_target_dev_state
 Date:		February 2018
 Contact:	Subhash Jadavani <subhashj@codeaurora.org>
 Description:	This entry shows the target power mode of an UFS device
@@ -946,6 +1028,7 @@ Description:	This entry shows the target power mode of an UFS device
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/rpm_target_link_state
+What:		/sys/bus/platform/devices/*.ufs/rpm_target_link_state
 Date:		February 2018
 Contact:	Subhash Jadavani <subhashj@codeaurora.org>
 Description:	This entry shows the target state of an UFS UIC link
@@ -954,6 +1037,7 @@ Description:	This entry shows the target state of an UFS UIC link
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/spm_lvl
+What:		/sys/bus/platform/devices/*.ufs/spm_lvl
 Date:		September 2014
 Contact:	Subhash Jadavani <subhashj@codeaurora.org>
 Description:	This entry could be used to set or show the UFS device
@@ -980,6 +1064,7 @@ Description:	This entry could be used to set or show the UFS device
 		==  ====================================================
 
 What:		/sys/bus/platform/drivers/ufshcd/*/spm_target_dev_state
+What:		/sys/bus/platform/devices/*.ufs/spm_target_dev_state
 Date:		February 2018
 Contact:	Subhash Jadavani <subhashj@codeaurora.org>
 Description:	This entry shows the target power mode of an UFS device
@@ -988,6 +1073,7 @@ Description:	This entry shows the target power mode of an UFS device
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/spm_target_link_state
+What:		/sys/bus/platform/devices/*.ufs/spm_target_link_state
 Date:		February 2018
 Contact:	Subhash Jadavani <subhashj@codeaurora.org>
 Description:	This entry shows the target state of an UFS UIC link
@@ -996,6 +1082,7 @@ Description:	This entry shows the target state of an UFS UIC link
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/monitor_enable
+What:		/sys/bus/platform/devices/*.ufs/monitor/monitor_enable
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file shows the status of performance monitor enablement
@@ -1003,6 +1090,7 @@ Description:	This file shows the status of performance monitor enablement
 		is stopped, the performance data collected is also cleared.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/monitor_chunk_size
+What:		/sys/bus/platform/devices/*.ufs/monitor/monitor_chunk_size
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file tells the monitor to focus on requests transferring
@@ -1010,6 +1098,7 @@ Description:	This file tells the monitor to focus on requests transferring
 		It can only be changed when monitor is disabled.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_total_sectors
+What:		/sys/bus/platform/devices/*.ufs/monitor/read_total_sectors
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file shows how many sectors (in 512 Bytes) have been
@@ -1018,6 +1107,7 @@ Description:	This file shows how many sectors (in 512 Bytes) have been
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_total_busy
+What:		/sys/bus/platform/devices/*.ufs/monitor/read_total_busy
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file shows how long (in micro seconds) has been spent
@@ -1026,6 +1116,7 @@ Description:	This file shows how long (in micro seconds) has been spent
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_nr_requests
+What:		/sys/bus/platform/devices/*.ufs/monitor/read_nr_requests
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file shows how many read requests have been sent after
@@ -1034,6 +1125,7 @@ Description:	This file shows how many read requests have been sent after
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_max
+What:		/sys/bus/platform/devices/*.ufs/monitor/read_req_latency_max
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file shows the maximum latency (in micro seconds) of
@@ -1042,6 +1134,7 @@ Description:	This file shows the maximum latency (in micro seconds) of
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_min
+What:		/sys/bus/platform/devices/*.ufs/monitor/read_req_latency_min
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file shows the minimum latency (in micro seconds) of
@@ -1050,6 +1143,7 @@ Description:	This file shows the minimum latency (in micro seconds) of
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_avg
+What:		/sys/bus/platform/devices/*.ufs/monitor/read_req_latency_avg
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file shows the average latency (in micro seconds) of
@@ -1058,6 +1152,7 @@ Description:	This file shows the average latency (in micro seconds) of
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_sum
+What:		/sys/bus/platform/devices/*.ufs/monitor/read_req_latency_sum
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file shows the total latency (in micro seconds) of
@@ -1066,6 +1161,7 @@ Description:	This file shows the total latency (in micro seconds) of
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_total_sectors
+What:		/sys/bus/platform/devices/*.ufs/monitor/write_total_sectors
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file shows how many sectors (in 512 Bytes) have been sent
@@ -1074,6 +1170,7 @@ Description:	This file shows how many sectors (in 512 Bytes) have been sent
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_total_busy
+What:		/sys/bus/platform/devices/*.ufs/monitor/write_total_busy
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file shows how long (in micro seconds) has been spent
@@ -1082,6 +1179,7 @@ Description:	This file shows how long (in micro seconds) has been spent
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_nr_requests
+What:		/sys/bus/platform/devices/*.ufs/monitor/write_nr_requests
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file shows how many write requests have been sent after
@@ -1090,6 +1188,7 @@ Description:	This file shows how many write requests have been sent after
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_max
+What:		/sys/bus/platform/devices/*.ufs/monitor/write_req_latency_max
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file shows the maximum latency (in micro seconds) of write
@@ -1098,6 +1197,7 @@ Description:	This file shows the maximum latency (in micro seconds) of write
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_min
+What:		/sys/bus/platform/devices/*.ufs/monitor/write_req_latency_min
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file shows the minimum latency (in micro seconds) of write
@@ -1106,6 +1206,7 @@ Description:	This file shows the minimum latency (in micro seconds) of write
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_avg
+What:		/sys/bus/platform/devices/*.ufs/monitor/write_req_latency_avg
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file shows the average latency (in micro seconds) of write
@@ -1114,6 +1215,7 @@ Description:	This file shows the average latency (in micro seconds) of write
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum
+What:		/sys/bus/platform/devices/*.ufs/monitor/write_req_latency_sum
 Date:		January 2021
 Contact:	Can Guo <cang@codeaurora.org>
 Description:	This file shows the total latency (in micro seconds) of write
@@ -1122,6 +1224,7 @@ Description:	This file shows the total latency (in micro seconds) of write
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/wb_presv_us_en
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows if preserve user-space was configured
@@ -1129,6 +1232,7 @@ Description:	This entry shows if preserve user-space was configured
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_shared_alloc_units
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/wb_shared_alloc_units
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the shared allocated units of WB buffer
@@ -1136,6 +1240,7 @@ Description:	This entry shows the shared allocated units of WB buffer
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_type
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/wb_type
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the configured WB type.
@@ -1144,6 +1249,7 @@ Description:	This entry shows the configured WB type.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_buff_cap_adj
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_buff_cap_adj
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the total user-space decrease in shared
@@ -1154,6 +1260,7 @@ Description:	This entry shows the total user-space decrease in shared
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_alloc_units
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_alloc_units
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the Maximum total WriteBooster Buffer size
@@ -1162,6 +1269,7 @@ Description:	This entry shows the Maximum total WriteBooster Buffer size
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_max_wb_luns
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_max_wb_luns
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the maximum number of luns that can support
@@ -1170,6 +1278,7 @@ Description:	This entry shows the maximum number of luns that can support
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_red_type
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_red_type
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	The supportability of user space reduction mode
@@ -1184,6 +1293,7 @@ Description:	The supportability of user space reduction mode
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/wb_sup_wb_type
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/wb_sup_wb_type
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	The supportability of WriteBooster Buffer type.
@@ -1198,6 +1308,7 @@ Description:	The supportability of WriteBooster Buffer type.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/wb_enable
+What:		/sys/bus/platform/devices/*.ufs/flags/wb_enable
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the status of WriteBooster.
@@ -1210,6 +1321,7 @@ Description:	This entry shows the status of WriteBooster.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_en
+What:		/sys/bus/platform/devices/*.ufs/flags/wb_flush_en
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows if flush is enabled.
@@ -1222,6 +1334,7 @@ Description:	This entry shows if flush is enabled.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/wb_flush_during_h8
+What:		/sys/bus/platform/devices/*.ufs/flags/wb_flush_during_h8
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	Flush WriteBooster Buffer during hibernate state.
@@ -1236,6 +1349,7 @@ Description:	Flush WriteBooster Buffer during hibernate state.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_avail_buf
+What:		/sys/bus/platform/devices/*.ufs/attributes/wb_avail_buf
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the amount of unused WriteBooster buffer
@@ -1244,6 +1358,7 @@ Description:	This entry shows the amount of unused WriteBooster buffer
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_cur_buf
+What:		/sys/bus/platform/devices/*.ufs/attributes/wb_cur_buf
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the amount of unused current buffer.
@@ -1251,6 +1366,7 @@ Description:	This entry shows the amount of unused current buffer.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_flush_status
+What:		/sys/bus/platform/devices/*.ufs/attributes/wb_flush_status
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows the flush operation status.
@@ -1267,6 +1383,7 @@ Description:	This entry shows the flush operation status.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/wb_life_time_est
+What:		/sys/bus/platform/devices/*.ufs/attributes/wb_life_time_est
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
 Description:	This entry shows an indication of the WriteBooster Buffer
@@ -1289,6 +1406,7 @@ Description:	This entry shows the configured size of WriteBooster buffer.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/wb_on
+What:		/sys/bus/platform/devices/*.ufs/wb_on
 Date:		January 2021
 Contact:	Bean Huo <beanhuo@micron.com>
 Description:	This node is used to set or display whether UFS WriteBooster is
@@ -1299,7 +1417,17 @@ Description:	This node is used to set or display whether UFS WriteBooster is
 		platform that doesn't support UFSHCD_CAP_CLK_SCALING, we can
 		disable/enable WriteBooster through this sysfs node.
 
+What:		/sys/bus/platform/drivers/ufshcd/*/enable_wb_buf_flush
+What:		/sys/bus/platform/devices/*.ufs/enable_wb_buf_flush
+Date:		July 2022
+Contact:	Jinyoung Choi <j-young.choi@samsung.com>
+Description:	This entry shows the status of WriteBooster buffer flushing
+		and it can be used to enable or disable the flushing.
+		If flushing is enabled, the device executes the flush
+		operation when the command queue is empty.
+
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/hpb_version
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/hpb_version
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
 Description:	This entry shows the HPB specification version.
@@ -1310,6 +1438,7 @@ Description:	This entry shows the HPB specification version.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/hpb_control
+What:		/sys/bus/platform/devices/*.ufs/device_descriptor/hpb_control
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
 Description:	This entry shows an indication of the HPB control mode.
@@ -1319,6 +1448,7 @@ Description:	This entry shows an indication of the HPB control mode.
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_region_size
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/hpb_region_size
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
 Description:	This entry shows the bHPBRegionSize which can be calculated
@@ -1328,6 +1458,7 @@ Description:	This entry shows the bHPBRegionSize which can be calculated
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_number_lu
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/hpb_number_lu
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
 Description:	This entry shows the maximum number of HPB LU supported	by
@@ -1338,6 +1469,7 @@ Description:	This entry shows the maximum number of HPB LU supported	by
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_subregion_size
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/hpb_subregion_size
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
 Description:	This entry shows the bHPBSubRegionSize, which can be
@@ -1349,6 +1481,7 @@ Description:	This entry shows the bHPBSubRegionSize, which can be
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/geometry_descriptor/hpb_max_active_regions
+What:		/sys/bus/platform/devices/*.ufs/geometry_descriptor/hpb_max_active_regions
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
 Description:	This entry shows the maximum number of active HPB regions that
@@ -1394,7 +1527,7 @@ Description:	This entry shows the number of reads that cannot be changed to
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/hpb_stats/rb_noti_cnt
+What:		/sys/class/scsi_device/*/device/hpb_stats/rcmd_noti_cnt
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
 Description:	This entry shows the number of response UPIUs that has
@@ -1402,19 +1535,23 @@ Description:	This entry shows the number of response UPIUs that has
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/hpb_stats/rb_active_cnt
+What:		/sys/class/scsi_device/*/device/hpb_stats/rcmd_active_cnt
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
-Description:	This entry shows the number of active sub-regions recommended by
-		response UPIUs.
+Description:	For the HPB device control mode, this entry shows the number of
+        active sub-regions recommended by response UPIUs. For the HPB host control
+        mode, this entry shows the number of active sub-regions recommended by the
+        HPB host control mode heuristic algorithm.
 
 		The file is read only.
 
-What:		/sys/class/scsi_device/*/device/hpb_stats/rb_inactive_cnt
+What:		/sys/class/scsi_device/*/device/hpb_stats/rcmd_inactive_cnt
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
-Description:	This entry shows the number of inactive regions recommended by
-		response UPIUs.
+Description:	For the HPB device control mode, this entry shows the number of
+        inactive regions recommended by response UPIUs. For the HPB host control
+        mode, this entry shows the number of inactive regions recommended by the
+        HPB host control mode heuristic algorithm.
 
 		The file is read only.
 
@@ -1434,6 +1571,7 @@ Description:	This entry shows the requeue timeout threshold for write buffer
 		this entry.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/attributes/max_data_size_hpb_single_cmd
+What:		/sys/bus/platform/devices/*.ufs/attributes/max_data_size_hpb_single_cmd
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
 Description:	This entry shows the maximum HPB data size for using a single HPB
@@ -1450,6 +1588,7 @@ Description:	This entry shows the maximum HPB data size for using a single HPB
 		The file is read only.
 
 What:		/sys/bus/platform/drivers/ufshcd/*/flags/hpb_enable
+What:		/sys/bus/platform/devices/*.ufs/flags/hpb_enable
 Date:		June 2021
 Contact:	Daejun Park <daejun7.park@samsung.com>
 Description:	This entry shows the status of HPB.
@@ -1461,6 +1600,43 @@ Description:	This entry shows the status of HPB.
 
 		The file is read only.
 
+Contact:	Daniil Lunev <dlunev@chromium.org>
+What:		/sys/bus/platform/drivers/ufshcd/*/capabilities/
+What:		/sys/bus/platform/devices/*.ufs/capabilities/
+Date:		August 2022
+Description:	The group represents the effective capabilities of the
+		host-device pair. i.e. the capabilities which are enabled in the
+		driver for the specific host controller, supported by the host
+		controller and are supported and/or have compatible
+		configuration on the device side.
+
+Contact:	Daniil Lunev <dlunev@chromium.org>
+What:		/sys/bus/platform/drivers/ufshcd/*/capabilities/clock_scaling
+What:		/sys/bus/platform/devices/*.ufs/capabilities/clock_scaling
+Date:		August 2022
+Contact:	Daniil Lunev <dlunev@chromium.org>
+Description:	Indicates status of clock scaling.
+
+		== ============================
+		0  Clock scaling is not supported.
+		1  Clock scaling is supported.
+		== ============================
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/capabilities/write_booster
+What:		/sys/bus/platform/devices/*.ufs/capabilities/write_booster
+Date:		August 2022
+Contact:	Daniil Lunev <dlunev@chromium.org>
+Description:	Indicates status of Write Booster.
+
+		== ============================
+		0  Write Booster can not be enabled.
+		1  Write Booster can be enabled.
+		== ============================
+
+		The file is read only.
+
 What:		/sys/class/scsi_device/*/device/hpb_param_sysfs/activation_thld
 Date:		February 2021
 Contact:	Avri Altman <avri.altman@wdc.com>
diff --git a/Documentation/ABI/testing/sysfs-driver-xen-blkback b/Documentation/ABI/testing/sysfs-driver-xen-blkback
index ac2947b98950..fac0f429a869 100644
--- a/Documentation/ABI/testing/sysfs-driver-xen-blkback
+++ b/Documentation/ABI/testing/sysfs-driver-xen-blkback
@@ -29,7 +29,7 @@ Description:
 What:           /sys/module/xen_blkback/parameters/buffer_squeeze_duration_ms
 Date:           December 2019
 KernelVersion:  5.6
-Contact:        SeongJae Park <sjpark@amazon.de>
+Contact:        Maximilian Heyne <mheyne@amazon.de>
 Description:
                 When memory pressure is reported to blkback this option
                 controls the duration in milliseconds that blkback will not
@@ -39,8 +39,8 @@ Description:
 What:           /sys/module/xen_blkback/parameters/feature_persistent
 Date:           September 2020
 KernelVersion:  5.10
-Contact:        SeongJae Park <sjpark@amazon.de>
+Contact:        Maximilian Heyne <mheyne@amazon.de>
 Description:
                 Whether to enable the persistent grants feature or not.  Note
-                that this option only takes effect on newly created backends.
+                that this option only takes effect on newly connected backends.
                 The default is Y (enable).
diff --git a/Documentation/ABI/testing/sysfs-driver-xen-blkfront b/Documentation/ABI/testing/sysfs-driver-xen-blkfront
index 28008905615f..4d36c5a10546 100644
--- a/Documentation/ABI/testing/sysfs-driver-xen-blkfront
+++ b/Documentation/ABI/testing/sysfs-driver-xen-blkfront
@@ -12,8 +12,8 @@ Description:
 What:           /sys/module/xen_blkfront/parameters/feature_persistent
 Date:           September 2020
 KernelVersion:  5.10
-Contact:        SeongJae Park <sjpark@amazon.de>
+Contact:        Maximilian Heyne <mheyne@amazon.de>
 Description:
                 Whether to enable the persistent grants feature or not.  Note
-                that this option only takes effect on newly created frontends.
+                that this option only takes effect on newly connected frontends.
                 The default is Y (enable).
diff --git a/Documentation/ABI/testing/sysfs-driver-xilinx-tmr-manager b/Documentation/ABI/testing/sysfs-driver-xilinx-tmr-manager
new file mode 100644
index 000000000000..57b9b68a73ee
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-xilinx-tmr-manager
@@ -0,0 +1,16 @@
+What:          /sys/devices/platform/amba_pl/<dev>/errcnt
+Date:          Nov 2022
+Contact:       appana.durga.kedareswara.rao@amd.com
+Description:   This control file provides the fault detection count.
+               This file cannot be written.
+               Example:
+               # cat /sys/devices/platform/amba_pl/44a10000.tmr_manager/errcnt
+               1
+
+What:          /sys/devices/platform/amba_pl/<dev>/dis_block_break
+Date:          Nov 2022
+Contact:       appana.durga.kedareswara.rao@amd.com
+Description:   Write any value to it, This control file enables the break signal.
+               This file is write only.
+               Example:
+               # echo <any value> > /sys/devices/platform/amba_pl/44a10000.tmr_manager/dis_block_break
diff --git a/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
new file mode 100644
index 000000000000..8f93d27b6d91
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-zynqmp-fpga
@@ -0,0 +1,73 @@
+What:		/sys/bus/platform/drivers/zynqmp_fpga_manager/firmware:zynqmp-firmware:pcap/status
+Date:		February 2023
+KernelVersion:	6.4
+Contact:	Nava kishore Manne <nava.kishore.manne@amd.com>
+Description:	(RO) Read fpga status.
+		Read returns a hexadecimal value that tells the current status
+		of the FPGA device. Each bit position in the status value is
+		described Below(see ug570 chapter 9).
+		https://docs.xilinx.com/v/u/en-US/ug570-ultrascale-configuration
+
+		======================  ==============================================
+		BIT(0)			0: No CRC error
+					1: CRC error
+
+		BIT(1)			0: Decryptor security not set
+					1: Decryptor security set
+
+		BIT(2)			0: MMCMs/PLLs are not locked
+					1: MMCMs/PLLs are locked
+
+		BIT(3)			0: DCI not matched
+					1: DCI matched
+
+		BIT(4)			0: Start-up sequence has not finished
+					1: Start-up sequence has finished
+
+		BIT(5)			0: All I/Os are placed in High-Z state
+					1: All I/Os behave as configured
+
+		BIT(6)			0: Flip-flops and block RAM are write disabled
+					1: Flip-flops and block RAM are write enabled
+
+		BIT(7)			0: GHIGH_B_STATUS asserted
+					1: GHIGH_B_STATUS deasserted
+
+		BIT(8) to BIT(10)	Status of the mode pins
+
+		BIT(11)			0: Initialization has not finished
+					1: Initialization finished
+
+		BIT(12)			Value on INIT_B_PIN pin
+
+		BIT(13)			0: Signal not released
+					1: Signal released
+
+		BIT(14)			Value on DONE_PIN pin.
+
+		BIT(15)			0: No IDCODE_ERROR
+					1: IDCODE_ERROR
+
+		BIT(16)			0: No SECURITY_ERROR
+					1: SECURITY_ERROR
+
+		BIT(17)			System Monitor over-temperature if set
+
+		BIT(18) to BIT(20)	Start-up state machine (0 to 7)
+					Phase 0 = 000
+					Phase 1 = 001
+					Phase 2 = 011
+					Phase 3 = 010
+					Phase 4 = 110
+					Phase 5 = 111
+					Phase 6 = 101
+					Phase 7 = 100
+
+		BIT(25) to BIT(26)	Indicates the detected bus width
+					00 = x1
+					01 = x8
+					10 = x16
+					11 = x32
+		======================  ==============================================
+
+		The other bits are reserved.
diff --git a/Documentation/ABI/testing/sysfs-firmware-efi-esrt b/Documentation/ABI/testing/sysfs-firmware-efi-esrt
index 31b57676d4ad..4c2d440487dd 100644
--- a/Documentation/ABI/testing/sysfs-firmware-efi-esrt
+++ b/Documentation/ABI/testing/sysfs-firmware-efi-esrt
@@ -24,14 +24,14 @@ Date:		February 2015
 Contact:	Peter Jones <pjones@redhat.com>
 Description:	The version of the ESRT structure provided by the firmware.
 
-What:		/sys/firmware/efi/esrt/entries/entry$N/
+What:		/sys/firmware/efi/esrt/entries/entry<N>/
 Date:		February 2015
 Contact:	Peter Jones <pjones@redhat.com>
 Description:	Each ESRT entry is identified by a GUID, and each gets a
 		subdirectory under entries/ .
 		example: /sys/firmware/efi/esrt/entries/entry0/
 
-What:		/sys/firmware/efi/esrt/entries/entry$N/fw_type
+What:		/sys/firmware/efi/esrt/entries/entry<N>/fw_type
 Date:		February 2015
 Contact:	Peter Jones <pjones@redhat.com>
 Description:	What kind of firmware entry this is:
@@ -43,33 +43,33 @@ Description:	What kind of firmware entry this is:
 		3   UEFI Driver
 		==  ===============
 
-What:		/sys/firmware/efi/esrt/entries/entry$N/fw_class
+What:		/sys/firmware/efi/esrt/entries/entry<N>/fw_class
 Date:		February 2015
 Contact:	Peter Jones <pjones@redhat.com>
 Description:	This is the entry's guid, and will match the directory name.
 
-What:		/sys/firmware/efi/esrt/entries/entry$N/fw_version
+What:		/sys/firmware/efi/esrt/entries/entry<N>/fw_version
 Date:		February 2015
 Contact:	Peter Jones <pjones@redhat.com>
 Description:	The version of the firmware currently installed.  This is a
 		32-bit unsigned integer.
 
-What:		/sys/firmware/efi/esrt/entries/entry$N/lowest_supported_fw_version
+What:		/sys/firmware/efi/esrt/entries/entry<N>/lowest_supported_fw_version
 Date:		February 2015
 Contact:	Peter Jones <pjones@redhat.com>
 Description:	The lowest version of the firmware that can be installed.
 
-What:		/sys/firmware/efi/esrt/entries/entry$N/capsule_flags
+What:		/sys/firmware/efi/esrt/entries/entry<N>/capsule_flags
 Date:		February 2015
 Contact:	Peter Jones <pjones@redhat.com>
 Description:	Flags that must be passed to UpdateCapsule()
 
-What:		/sys/firmware/efi/esrt/entries/entry$N/last_attempt_version
+What:		/sys/firmware/efi/esrt/entries/entry<N>/last_attempt_version
 Date:		February 2015
 Contact:	Peter Jones <pjones@redhat.com>
 Description:	The last firmware version for which an update was attempted.
 
-What:		/sys/firmware/efi/esrt/entries/entry$N/last_attempt_status
+What:		/sys/firmware/efi/esrt/entries/entry<N>/last_attempt_status
 Date:		February 2015
 Contact:	Peter Jones <pjones@redhat.com>
 Description:	The result of the last firmware update attempt for the
diff --git a/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info b/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info
new file mode 100644
index 000000000000..141a6b371469
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-papr-energy-scale-info
@@ -0,0 +1,29 @@
+What:		/sys/firmware/papr/energy_scale_info
+Date:		February 2022
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	Directory hosting a set of platform attributes like
+		energy/frequency on Linux running as a PAPR guest.
+
+		Each file in a directory contains a platform
+		attribute hierarchy pertaining to performance/
+		energy-savings mode and processor frequency.
+
+What:		/sys/firmware/papr/energy_scale_info/<id>
+Date:		February 2022
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	Energy, frequency attributes directory for POWERVM servers
+
+What:		/sys/firmware/papr/energy_scale_info/<id>/desc
+Date:		February 2022
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	String description of the energy attribute of <id>
+
+What:		/sys/firmware/papr/energy_scale_info/<id>/value
+Date:		February 2022
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	Numeric value of the energy attribute of <id>
+
+What:		/sys/firmware/papr/energy_scale_info/<id>/value_desc
+Date:		February 2022
+Contact:	Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
+Description:	String value of the energy attribute of <id>
diff --git a/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
index ee0d6dbc810e..54d1bfd0db12 100644
--- a/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
+++ b/Documentation/ABI/testing/sysfs-firmware-qemu_fw_cfg
@@ -12,8 +12,9 @@ Description:
 		configuration data to the guest userspace.
 
 		The authoritative guest-side hardware interface documentation
-		to the fw_cfg device can be found in "docs/specs/fw_cfg.txt"
-		in the QEMU source tree.
+		to the fw_cfg device can be found in "docs/specs/fw_cfg.rst"
+		in the QEMU source tree, or online at:
+		https://qemu-project.gitlab.io/qemu/specs/fw_cfg.html
 
 		**SysFS fw_cfg Interface**
 
diff --git a/Documentation/ABI/testing/sysfs-fs-erofs b/Documentation/ABI/testing/sysfs-fs-erofs
new file mode 100644
index 000000000000..284224d1b56f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-fs-erofs
@@ -0,0 +1,18 @@
+What:		/sys/fs/erofs/features/
+Date:		November 2021
+Contact:	"Huang Jianan" <huangjianan@oppo.com>
+Description:	Shows all enabled kernel features.
+		Supported features:
+		zero_padding, compr_cfgs, big_pcluster, chunked_file,
+		device_table, compr_head2, sb_chksum, ztailpacking,
+		dedupe, fragments.
+
+What:		/sys/fs/erofs/<disk>/sync_decompress
+Date:		November 2021
+Contact:	"Huang Jianan" <huangjianan@oppo.com>
+Description:	Control strategy of sync decompression:
+
+		- 0 (default, auto): enable for readpage, and enable for
+		  readahead on atomic contexts only.
+		- 1 (force on): enable for readpage and readahead.
+		- 2 (force off): disable for all situations.
diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs
index f627e705e663..8140fc98f5ae 100644
--- a/Documentation/ABI/testing/sysfs-fs-f2fs
+++ b/Documentation/ABI/testing/sysfs-fs-f2fs
@@ -49,15 +49,23 @@ Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
 Description:	Controls the in-place-update policy.
 		updates in f2fs. User can set:
 
-		====  =================
-		0x01  F2FS_IPU_FORCE
-		0x02  F2FS_IPU_SSR
-		0x04  F2FS_IPU_UTIL
-		0x08  F2FS_IPU_SSR_UTIL
-		0x10  F2FS_IPU_FSYNC
-		0x20  F2FS_IPU_ASYNC,
-		0x40  F2FS_IPU_NOCACHE
-		====  =================
+		===== =============== ===================================================
+		value policy          description
+		0x00  DISABLE         disable IPU(=default option in LFS mode)
+		0x01  FORCE           all the time
+		0x02  SSR             if SSR mode is activated
+		0x04  UTIL            if FS utilization is over threashold
+		0x08  SSR_UTIL        if SSR mode is activated and FS utilization is over
+		                      threashold
+		0x10  FSYNC           activated in fsync path only for high performance
+		                      flash storages. IPU will be triggered only if the
+		                      # of dirty pages over min_fsync_blocks.
+		                      (=default option)
+		0x20  ASYNC           do IPU given by asynchronous write requests
+		0x40  NOCACHE         disable IPU bio cache
+		0x80  HONOR_OPU_WRITE use OPU write prior to IPU write if inode has
+		                      FI_OPU_WRITE flag
+		===== =============== ===================================================
 
 		Refer segment.h for details.
 
@@ -98,13 +106,47 @@ Description:	Controls the issue rate of discard commands that consist of small
 		checkpoint is triggered, and issued during the checkpoint.
 		By default, it is disabled with 0.
 
+What:		/sys/fs/f2fs/<disk>/max_ordered_discard
+Date:		October 2022
+Contact:	"Yangtao Li" <frank.li@vivo.com>
+Description:	Controls the maximum ordered discard, the unit size is one block(4KB).
+		Set it to 16 by default.
+
+What:		/sys/fs/f2fs/<disk>/max_discard_request
+Date:		December 2021
+Contact:	"Konstantin Vyshetsky" <vkon@google.com>
+Description:	Controls the number of discards a thread will issue at a time.
+		Higher number will allow the discard thread to finish its work
+		faster, at the cost of higher latency for incomming I/O.
+
+What:		/sys/fs/f2fs/<disk>/min_discard_issue_time
+Date:		December 2021
+Contact:	"Konstantin Vyshetsky" <vkon@google.com>
+Description:	Controls the interval the discard thread will wait between
+		issuing discard requests when there are discards to be issued and
+		no I/O aware interruptions occur.
+
+What:		/sys/fs/f2fs/<disk>/mid_discard_issue_time
+Date:		December 2021
+Contact:	"Konstantin Vyshetsky" <vkon@google.com>
+Description:	Controls the interval the discard thread will wait between
+		issuing discard requests when there are discards to be issued and
+		an I/O aware interruption occurs.
+
+What:		/sys/fs/f2fs/<disk>/max_discard_issue_time
+Date:		December 2021
+Contact:	"Konstantin Vyshetsky" <vkon@google.com>
+Description:	Controls the interval the discard thread will wait when there are
+		no discard operations to be issued.
+
 What:		/sys/fs/f2fs/<disk>/discard_granularity
 Date:		July 2017
 Contact:	"Chao Yu" <yuchao0@huawei.com>
 Description:	Controls discard granularity of inner discard thread. Inner thread
 		will not issue discards with size that is smaller than granularity.
 		The unit size is one block(4KB), now only support configuring
-		in range of [1, 512]. Default value is 4(=16KB).
+		in range of [1, 512]. Default value is 16.
+		For small devices, default value is 1.
 
 What:		/sys/fs/f2fs/<disk>/umount_discard_timeout
 Date:		January 2019
@@ -112,6 +154,11 @@ Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
 Description:	Set timeout to issue discard commands during umount.
 	        Default: 5 secs
 
+What:		/sys/fs/f2fs/<disk>/pending_discard
+Date:		November 2021
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:	Shows the number of pending discard commands in the queue.
+
 What:		/sys/fs/f2fs/<disk>/max_victim_search
 Date:		January 2014
 Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
@@ -143,12 +190,6 @@ Description:	Controls the memory footprint used by free nids and cached
 		nat entries. By default, 1 is set, which indicates
 		10 MB / 1 GB RAM.
 
-What:		/sys/fs/f2fs/<disk>/batched_trim_sections
-Date:		February 2015
-Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
-Description:	Controls the trimming rate in batch mode.
-		<deprecated>
-
 What:		/sys/fs/f2fs/<disk>/cp_interval
 Date:		October 2015
 Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
@@ -202,7 +243,7 @@ Description:	Shows total written kbytes issued to disk.
 What:		/sys/fs/f2fs/<disk>/features
 Date:		July 2017
 Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
-Description:	<deprecated: should use /sys/fs/f2fs/<disk>/feature_list/
+Description:	<deprecated: should use /sys/fs/f2fs/<disk>/feature_list/>
 		Shows all enabled features in current device.
 		Supported features:
 		encryption, blkzoned, extra_attr, projquota, inode_checksum,
@@ -264,11 +305,16 @@ Description:	Shows current reserved blocks in system, it may be temporarily
 What:		/sys/fs/f2fs/<disk>/gc_urgent
 Date:		August 2017
 Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
-Description:	Do background GC aggressively when set. When gc_urgent = 1,
-		background thread starts to do GC by given gc_urgent_sleep_time
-		interval. When gc_urgent = 2, F2FS will lower the bar of
-		checking idle in order to process outstanding discard commands
-		and GC a little bit aggressively. It is set to 0 by default.
+Description:	Do background GC aggressively when set. Set to 0 by default.
+		gc urgent high(1): does GC forcibly in a period of given
+		gc_urgent_sleep_time and ignores I/O idling check. uses greedy
+		GC approach and turns SSR mode on.
+		gc urgent low(2): lowers the bar of checking I/O idling in
+		order to process outstanding discard commands and GC a
+		little bit aggressively. uses cost benefit GC approach.
+		gc urgent mid(3): does GC forcibly in a period of given
+		gc_urgent_sleep_time and executes a mid level of I/O idling check.
+		uses cost benefit GC approach.
 
 What:		/sys/fs/f2fs/<disk>/gc_urgent_sleep_time
 Date:		August 2017
@@ -425,8 +471,33 @@ Description:	Show status of f2fs superblock in real time.
 		0x800  SBI_QUOTA_SKIP_FLUSH  skip flushing quota in current CP
 		0x1000 SBI_QUOTA_NEED_REPAIR quota file may be corrupted
 		0x2000 SBI_IS_RESIZEFS       resizefs is in process
+		0x4000 SBI_IS_FREEZING       freefs is in process
 		====== ===================== =================================
 
+What:		/sys/fs/f2fs/<disk>/stat/cp_status
+Date:		September 2022
+Contact:	"Chao Yu" <chao.yu@oppo.com>
+Description:	Show status of f2fs checkpoint in real time.
+
+		=============================== ==============================
+		cp flag				value
+		CP_UMOUNT_FLAG			0x00000001
+		CP_ORPHAN_PRESENT_FLAG		0x00000002
+		CP_COMPACT_SUM_FLAG		0x00000004
+		CP_ERROR_FLAG			0x00000008
+		CP_FSCK_FLAG			0x00000010
+		CP_FASTBOOT_FLAG		0x00000020
+		CP_CRC_RECOVERY_FLAG		0x00000040
+		CP_NAT_BITS_FLAG		0x00000080
+		CP_TRIMMED_FLAG			0x00000100
+		CP_NOCRC_RECOVERY_FLAG		0x00000200
+		CP_LARGE_NAT_BITMAP_FLAG	0x00000400
+		CP_QUOTA_NEED_FSCK_FLAG		0x00000800
+		CP_DISABLED_FLAG		0x00001000
+		CP_DISABLED_QUICK_FLAG		0x00002000
+		CP_RESIZEFS_FLAG		0x00004000
+		=============================== ==============================
+
 What:		/sys/fs/f2fs/<disk>/ckpt_thread_ioprio
 Date:		January 2021
 Contact:	"Daeho Jeong" <daehojeong@google.com>
@@ -498,7 +569,7 @@ Date:		July 2021
 Contact:	"Daeho Jeong" <daehojeong@google.com>
 Description:	Show how many segments have been reclaimed by GC during a specific
 		GC mode (0: GC normal, 1: GC idle CB, 2: GC idle greedy,
-		3: GC idle AT, 4: GC urgent high, 5: GC urgent low)
+		3: GC idle AT, 4: GC urgent high, 5: GC urgent low 6: GC urgent mid)
 		You can re-initialize this value to "0".
 
 What:		/sys/fs/f2fs/<disk>/gc_segment_mode
@@ -512,3 +583,160 @@ Date:		July 2021
 Contact:	"Daeho Jeong" <daehojeong@google.com>
 Description:	You can	control the multiplier value of	bdi device readahead window size
 		between 2 (default) and 256 for POSIX_FADV_SEQUENTIAL advise option.
+
+What:		/sys/fs/f2fs/<disk>/max_fragment_chunk
+Date:		August 2021
+Contact:	"Daeho Jeong" <daehojeong@google.com>
+Description:	With "mode=fragment:block" mount options, we can scatter block allocation.
+		f2fs will allocate 1..<max_fragment_chunk> blocks in a chunk and make a hole
+		in the length of 1..<max_fragment_hole> by turns. This value can be set
+		between 1..512 and the default value is 4.
+
+What:		/sys/fs/f2fs/<disk>/max_fragment_hole
+Date:		August 2021
+Contact:	"Daeho Jeong" <daehojeong@google.com>
+Description:	With "mode=fragment:block" mount options, we can scatter block allocation.
+		f2fs will allocate 1..<max_fragment_chunk> blocks in a chunk and make a hole
+		in the length of 1..<max_fragment_hole> by turns. This value can be set
+		between 1..512 and the default value is 4.
+
+What:		/sys/fs/f2fs/<disk>/gc_remaining_trials
+Date:		October 2022
+Contact:	"Yangtao Li" <frank.li@vivo.com>
+Description:	You can set the trial count limit for GC urgent and idle mode with this value.
+		If GC thread gets to the limit, the mode will turn back to GC normal mode.
+		By default, the value is zero, which means there is no limit like before.
+
+What:		/sys/fs/f2fs/<disk>/max_roll_forward_node_blocks
+Date:		January 2022
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:	Controls max # of node block writes to be used for roll forward
+		recovery. This can limit the roll forward recovery time.
+
+What:		/sys/fs/f2fs/<disk>/unusable_blocks_per_sec
+Date:		June 2022
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:	Shows the number of unusable blocks in a section which was defined by
+		the zone capacity reported by underlying zoned device.
+
+What:		/sys/fs/f2fs/<disk>/current_atomic_write
+Date:		July 2022
+Contact:	"Daeho Jeong" <daehojeong@google.com>
+Description:	Show the total current atomic write block count, which is not committed yet.
+		This is a read-only entry.
+
+What:		/sys/fs/f2fs/<disk>/peak_atomic_write
+Date:		July 2022
+Contact:	"Daeho Jeong" <daehojeong@google.com>
+Description:	Show the peak value of total current atomic write block count after boot.
+		If you write "0" here, you can initialize to "0".
+
+What:		/sys/fs/f2fs/<disk>/committed_atomic_block
+Date:		July 2022
+Contact:	"Daeho Jeong" <daehojeong@google.com>
+Description:	Show the accumulated total committed atomic write block count after boot.
+		If you write "0" here, you can initialize to "0".
+
+What:		/sys/fs/f2fs/<disk>/revoked_atomic_block
+Date:		July 2022
+Contact:	"Daeho Jeong" <daehojeong@google.com>
+Description:	Show the accumulated total revoked atomic write block count after boot.
+		If you write "0" here, you can initialize to "0".
+
+What:		/sys/fs/f2fs/<disk>/gc_mode
+Date:		October 2022
+Contact:	"Yangtao Li" <frank.li@vivo.com>
+Description:	Show the current gc_mode as a string.
+		This is a read-only entry.
+
+What:		/sys/fs/f2fs/<disk>/discard_urgent_util
+Date:		November 2022
+Contact:	"Yangtao Li" <frank.li@vivo.com>
+Description:	When space utilization exceeds this, do background DISCARD aggressively.
+		Does DISCARD forcibly in a period of given min_discard_issue_time when the number
+		of discards is not 0 and set discard granularity to 1.
+		Default: 80
+
+What:		/sys/fs/f2fs/<disk>/hot_data_age_threshold
+Date:		November 2022
+Contact:	"Ping Xiong" <xiongping1@xiaomi.com>
+Description:	When DATA SEPARATION is on, it controls the age threshold to indicate
+		the data blocks as hot. By default it was initialized as 262144 blocks
+		(equals to 1GB).
+
+What:		/sys/fs/f2fs/<disk>/warm_data_age_threshold
+Date:		November 2022
+Contact:	"Ping Xiong" <xiongping1@xiaomi.com>
+Description:	When DATA SEPARATION is on, it controls the age threshold to indicate
+		the data blocks as warm. By default it was initialized as 2621440 blocks
+		(equals to 10GB).
+
+What:		/sys/fs/f2fs/<disk>/fault_rate
+Date:		May 2016
+Contact:	"Sheng Yong" <shengyong@oppo.com>
+Contact:	"Chao Yu" <chao@kernel.org>
+Description:	Enable fault injection in all supported types with
+		specified injection rate.
+
+What:		/sys/fs/f2fs/<disk>/fault_type
+Date:		May 2016
+Contact:	"Sheng Yong" <shengyong@oppo.com>
+Contact:	"Chao Yu" <chao@kernel.org>
+Description:	Support configuring fault injection type, should be
+		enabled with fault_injection option, fault type value
+		is shown below, it supports single or combined type.
+
+		===================      ===========
+		Type_Name                Type_Value
+		===================      ===========
+		FAULT_KMALLOC            0x000000001
+		FAULT_KVMALLOC           0x000000002
+		FAULT_PAGE_ALLOC         0x000000004
+		FAULT_PAGE_GET           0x000000008
+		FAULT_ALLOC_BIO          0x000000010 (obsolete)
+		FAULT_ALLOC_NID          0x000000020
+		FAULT_ORPHAN             0x000000040
+		FAULT_BLOCK              0x000000080
+		FAULT_DIR_DEPTH          0x000000100
+		FAULT_EVICT_INODE        0x000000200
+		FAULT_TRUNCATE           0x000000400
+		FAULT_READ_IO            0x000000800
+		FAULT_CHECKPOINT         0x000001000
+		FAULT_DISCARD            0x000002000
+		FAULT_WRITE_IO           0x000004000
+		FAULT_SLAB_ALLOC         0x000008000
+		FAULT_DQUOT_INIT         0x000010000
+		FAULT_LOCK_OP            0x000020000
+		FAULT_BLKADDR            0x000040000
+		===================      ===========
+
+What:		/sys/fs/f2fs/<disk>/discard_io_aware_gran
+Date:		January 2023
+Contact:	"Yangtao Li" <frank.li@vivo.com>
+Description:	Controls background discard granularity of inner discard thread
+		when is not in idle. Inner thread will not issue discards with size that
+		is smaller than granularity. The unit size is one block(4KB), now only
+		support configuring in range of [0, 512].
+		Default: 512
+
+What:		/sys/fs/f2fs/<disk>/last_age_weight
+Date:		January 2023
+Contact:	"Ping Xiong" <xiongping1@xiaomi.com>
+Description:	When DATA SEPARATION is on, it controls the weight of last data block age.
+
+What:		/sys/fs/f2fs/<disk>/compress_watermark
+Date:		February 2023
+Contact:	"Yangtao Li" <frank.li@vivo.com>
+Description:	When compress cache is on, it controls free memory watermark
+		in order to limit caching compress page. If free memory is lower
+		than watermark, then deny caching compress page. The value should be in
+		range of (0, 100], by default it was initialized as 20(%).
+
+What:		/sys/fs/f2fs/<disk>/compress_percent
+Date:		February 2023
+Contact:	"Yangtao Li" <frank.li@vivo.com>
+Description:	When compress cache is on, it controls cached page
+		percent(compress pages / free_ram) in order to limit caching compress page.
+		If cached page percent exceed threshold, then deny caching compress page.
+		The value should be in range of (0, 100], by default it was initialized
+		as 20(%).
diff --git a/Documentation/ABI/testing/sysfs-fs-ubifs b/Documentation/ABI/testing/sysfs-fs-ubifs
new file mode 100644
index 000000000000..af5afda30220
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-fs-ubifs
@@ -0,0 +1,35 @@
+What:		/sys/fs/ubifsX_Y/error_magic
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Exposes magic errors: every node starts with a magic number.
+
+		This counter keeps track of the number of accesses of nodes
+		with a corrupted magic number.
+
+		The counter is reset to 0 with a remount.
+
+What:		/sys/fs/ubifsX_Y/error_node
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Exposes node errors. Every node embeds its type.
+
+		This counter keeps track of the number of accesses of nodes
+		with a corrupted node type.
+
+		The counter is reset to 0 with a remount.
+
+What:		/sys/fs/ubifsX_Y/error_crc
+Date:		October 2021
+KernelVersion:	5.16
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Exposes crc errors: every node embeds a crc checksum.
+
+		This counter keeps track of the number of accesses of nodes
+		with a bad crc checksum.
+
+		The counter is reset to 0 with a remount.
diff --git a/Documentation/ABI/testing/sysfs-kernel-address_bits b/Documentation/ABI/testing/sysfs-kernel-address_bits
new file mode 100644
index 000000000000..5d09ff84d4d6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-address_bits
@@ -0,0 +1,10 @@
+What:		/sys/kernel/address_bit
+Date:		May 2023
+KernelVersion:	6.3
+Contact:	Thomas Weißschuh <linux@weissschuh.net>
+Description:
+		The address size of the running kernel in bits.
+
+		Access: Read
+
+Users:		util-linux
diff --git a/Documentation/ABI/testing/sysfs-kernel-cpu_byteorder b/Documentation/ABI/testing/sysfs-kernel-cpu_byteorder
new file mode 100644
index 000000000000..f0e6ac1b5356
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-cpu_byteorder
@@ -0,0 +1,12 @@
+What:		/sys/kernel/cpu_byteorder
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	Thomas Weißschuh <linux@weissschuh.net>
+Description:
+		The endianness of the running kernel.
+
+		Access: Read
+
+		Valid values:
+			"little", "big"
+Users:		util-linux
diff --git a/Documentation/ABI/testing/sysfs-kernel-iommu_groups b/Documentation/ABI/testing/sysfs-kernel-iommu_groups
index b15af6a5bc08..a42d4383d999 100644
--- a/Documentation/ABI/testing/sysfs-kernel-iommu_groups
+++ b/Documentation/ABI/testing/sysfs-kernel-iommu_groups
@@ -53,7 +53,6 @@ Description:	/sys/kernel/iommu_groups/<grp_id>/type shows the type of default
 
 		The default domain type of a group may be modified only when
 
-		- The group has only one device.
 		- The device in the group is not bound to any device driver.
 		  So, the users must unbind the appropriate driver before
 		  changing the default domain type.
diff --git a/Documentation/ABI/testing/sysfs-kernel-livepatch b/Documentation/ABI/testing/sysfs-kernel-livepatch
index bea7bd5a1d5f..a5df9b4910dc 100644
--- a/Documentation/ABI/testing/sysfs-kernel-livepatch
+++ b/Documentation/ABI/testing/sysfs-kernel-livepatch
@@ -55,6 +55,14 @@ Description:
 		The object directory contains subdirectories for each function
 		that is patched within the object.
 
+What:		/sys/kernel/livepatch/<patch>/<object>/patched
+Date:		August 2022
+KernelVersion:	6.1.0
+Contact:	live-patching@vger.kernel.org
+Description:
+		An attribute which indicates whether the object is currently
+		patched.
+
 What:		/sys/kernel/livepatch/<patch>/<object>/<function,sympos>
 Date:		Nov 2014
 KernelVersion:	3.19.0
diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-damon b/Documentation/ABI/testing/sysfs-kernel-mm-damon
new file mode 100644
index 000000000000..2744f21b5a6b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-mm-damon
@@ -0,0 +1,346 @@
+what:		/sys/kernel/mm/damon/
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Interface for Data Access MONitoring (DAMON).  Contains files
+		for controlling DAMON.  For more details on DAMON itself,
+		please refer to Documentation/admin-guide/mm/damon/index.rst.
+
+What:		/sys/kernel/mm/damon/admin/
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Interface for privileged users of DAMON.  Contains files for
+		controlling DAMON that aimed to be used by privileged users.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/nr_kdamonds
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing a number 'N' to this file creates the number of
+		directories for controlling each DAMON worker thread (kdamond)
+		named '0' to 'N-1' under the kdamonds/ directory.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/state
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing 'on' or 'off' to this file makes the kdamond starts or
+		stops, respectively.  Reading the file returns the keywords
+		based on the current status.  Writing 'commit' to this file
+		makes the kdamond reads the user inputs in the sysfs files
+		except 'state' again.  Writing 'update_schemes_stats' to the
+		file updates contents of schemes stats files of the kdamond.
+		Writing 'update_schemes_tried_regions' to the file updates
+		contents of 'tried_regions' directory of every scheme directory
+		of this kdamond.  Writing 'clear_schemes_tried_regions' to the
+		file removes contents of the 'tried_regions' directory.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/pid
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Reading this file returns the pid of the kdamond if it is
+		running.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/nr_contexts
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing a number 'N' to this file creates the number of
+		directories for controlling each DAMON context named '0' to
+		'N-1' under the contexts/ directory.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/avail_operations
+Date:		Apr 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Reading this file returns the available monitoring operations
+		sets on the currently running kernel.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/operations
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing a keyword for a monitoring operations set ('vaddr' for
+		virtual address spaces monitoring, 'fvaddr' for fixed virtual
+		address ranges monitoring, and 'paddr' for the physical address
+		space monitoring) to this file makes the context to use the
+		operations set.  Reading the file returns the keyword for the
+		operations set the context is set to use.
+
+		Note that only the operations sets that listed in
+		'avail_operations' file are valid inputs.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/intervals/sample_us
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing a value to this file sets the sampling interval of the
+		DAMON context in microseconds as the value.  Reading this file
+		returns the value.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/intervals/aggr_us
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing a value to this file sets the aggregation interval of
+		the DAMON context in microseconds as the value.  Reading this
+		file returns the value.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/intervals/update_us
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing a value to this file sets the update interval of the
+		DAMON context in microseconds as the value.  Reading this file
+		returns the value.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/nr_regions/min
+
+WDate:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing a value to this file sets the minimum number of
+		monitoring regions of the DAMON context as the value.  Reading
+		this file returns the value.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/monitoring_attrs/nr_regions/max
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing a value to this file sets the maximum number of
+		monitoring regions of the DAMON context as the value.  Reading
+		this file returns the value.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/targets/nr_targets
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing a number 'N' to this file creates the number of
+		directories for controlling each DAMON target of the context
+		named '0' to 'N-1' under the contexts/ directory.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/targets/<T>/pid_target
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the pid of
+		the target process if the context is for virtual address spaces
+		monitoring, respectively.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/targets/<T>/regions/nr_regions
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing a number 'N' to this file creates the number of
+		directories for setting each DAMON target memory region of the
+		context named '0' to 'N-1' under the regions/ directory.  In
+		case of the virtual address space monitoring, DAMON
+		automatically sets the target memory region based on the target
+		processes' mappings.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/targets/<T>/regions/<R>/start
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the start
+		address of the monitoring region.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/targets/<T>/regions/<R>/end
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the end
+		address of the monitoring region.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/nr_schemes
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing a number 'N' to this file creates the number of
+		directories for controlling each DAMON-based operation scheme
+		of the context named '0' to 'N-1' under the schemes/ directory.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/action
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the action
+		of the scheme.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/sz/min
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the mimimum
+		size of the scheme's target regions in bytes.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/sz/max
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the maximum
+		size of the scheme's target regions in bytes.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/nr_accesses/min
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the manimum
+		'nr_accesses' of the scheme's target regions.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/nr_accesses/max
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the maximum
+		'nr_accesses' of the scheme's target regions.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/age/min
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the minimum
+		'age' of the scheme's target regions.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/access_pattern/age/max
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the maximum
+		'age' of the scheme's target regions.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/ms
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the time
+		quota of the scheme in milliseconds.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/bytes
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the size
+		quota of the scheme in bytes.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/reset_interval_ms
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the quotas
+		charge reset interval of the scheme in milliseconds.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/weights/sz_permil
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the
+		under-quota limit regions prioritization weight for 'size' in
+		permil.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/weights/nr_accesses_permil
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the
+		under-quota limit regions prioritization weight for
+		'nr_accesses' in permil.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/quotas/weights/age_permil
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the
+		under-quota limit regions prioritization weight for 'age' in
+		permil.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/watermarks/metric
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the metric
+		of the watermarks for the scheme.  The writable/readable
+		keywords for this file are 'none' for disabling the watermarks
+		feature, or 'free_mem_rate' for the system's global free memory
+		rate in permil.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/watermarks/interval_us
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the metric
+		check interval of the watermarks for the scheme in
+		microseconds.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/watermarks/high
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the high
+		watermark of the scheme in permil.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/watermarks/mid
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the mid
+		watermark of the scheme in permil.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/watermarks/low
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the low
+		watermark of the scheme in permil.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/nr_filters
+Date:		Dec 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing a number 'N' to this file creates the number of
+		directories for setting filters of the scheme named '0' to
+		'N-1' under the filters/ directory.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/<F>/type
+Date:		Dec 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing to and reading from this file sets and gets the type of
+		the memory of the interest.  'anon' for anonymous pages, or
+		'memcg' for specific memory cgroup can be written and read.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/<F>/memcg_path
+Date:		Dec 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	If 'memcg' is written to the 'type' file, writing to and
+		reading from this file sets and gets the path to the memory
+		cgroup of the interest.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/filters/<F>/matching
+Date:		Dec 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Writing 'Y' or 'N' to this file sets whether to filter out
+		pages that do or do not match to the 'type' and 'memcg_path',
+		respectively.  Filter out means the action of the scheme will
+		not be applied to.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/nr_tried
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Reading this file returns the number of regions that the action
+		of the scheme has tried to be applied.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/sz_tried
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Reading this file returns the total size of regions that the
+		action of the scheme has tried to be applied in bytes.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/nr_applied
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Reading this file returns the number of regions that the action
+		of the scheme has successfully applied.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/sz_applied
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Reading this file returns the total size of regions that the
+		action of the scheme has successfully applied in bytes.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/stats/qt_exceeds
+Date:		Mar 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Reading this file returns the number of the exceed events of
+		the scheme's quotas.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/tried_regions/<R>/start
+Date:		Oct 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Reading this file returns the start address of a memory region
+		that corresponding DAMON-based Operation Scheme's action has
+		tried to be applied.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/tried_regions/<R>/end
+Date:		Oct 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Reading this file returns the end address of a memory region
+		that corresponding DAMON-based Operation Scheme's action has
+		tried to be applied.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/tried_regions/<R>/nr_accesses
+Date:		Oct 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Reading this file returns the 'nr_accesses' of a memory region
+		that corresponding DAMON-based Operation Scheme's action has
+		tried to be applied.
+
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/<C>/schemes/<S>/tried_regions/<R>/age
+Date:		Oct 2022
+Contact:	SeongJae Park <sj@kernel.org>
+Description:	Reading this file returns the 'age' of a memory region that
+		corresponding DAMON-based Operation Scheme's action has tried
+		to be applied.
diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-ksm b/Documentation/ABI/testing/sysfs-kernel-mm-ksm
index 1c9bed5595f5..6041a025b65a 100644
--- a/Documentation/ABI/testing/sysfs-kernel-mm-ksm
+++ b/Documentation/ABI/testing/sysfs-kernel-mm-ksm
@@ -41,7 +41,7 @@ Description:	Kernel Samepage Merging daemon sysfs interface
 		sleep_millisecs: how many milliseconds ksm should sleep between
 		scans.
 
-		See Documentation/vm/ksm.rst for more information.
+		See Documentation/mm/ksm.rst for more information.
 
 What:		/sys/kernel/mm/ksm/merge_across_nodes
 Date:		January 2013
@@ -51,3 +51,11 @@ Description:	Control merging pages across different NUMA nodes.
 
 		When it is set to 0 only pages from the same node are merged,
 		otherwise pages from all nodes can be merged together (default).
+
+What:		/sys/kernel/mm/ksm/general_profit
+Date:		April 2023
+KernelVersion:  6.4
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Measure how effective KSM is.
+		general_profit: how effective is KSM. The formula for the
+		calculation is in Documentation/admin-guide/mm/ksm.rst.
diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-memory-tiers b/Documentation/ABI/testing/sysfs-kernel-mm-memory-tiers
new file mode 100644
index 000000000000..721a05b90109
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-mm-memory-tiers
@@ -0,0 +1,25 @@
+What:		/sys/devices/virtual/memory_tiering/
+Date:		August 2022
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	A collection of all the memory tiers allocated.
+
+		Individual memory tier details are contained in subdirectories
+		named by the abstract distance of the memory tier.
+
+		/sys/devices/virtual/memory_tiering/memory_tierN/
+
+
+What:		/sys/devices/virtual/memory_tiering/memory_tierN/
+		/sys/devices/virtual/memory_tiering/memory_tierN/nodelist
+Date:		August 2022
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Directory with details of a specific memory tier
+
+		This is the directory containing information about a particular
+		memory tier, memtierN, where N is derived based on abstract distance.
+
+		A smaller value of N implies a higher (faster) memory tier in the
+		hierarchy.
+
+		nodelist: NUMA nodes that are part of this memory tier.
+
diff --git a/Documentation/ABI/testing/sysfs-kernel-oops_count b/Documentation/ABI/testing/sysfs-kernel-oops_count
new file mode 100644
index 000000000000..156cca9dbc96
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-oops_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/oops_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Oopsed since last boot.
diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab
index c9f12baf8baa..cd5fb8fa3ddf 100644
--- a/Documentation/ABI/testing/sysfs-kernel-slab
+++ b/Documentation/ABI/testing/sysfs-kernel-slab
@@ -10,7 +10,7 @@ Description:
 		any cache it aliases, if any).
 Users:		kernel memory tuning tools
 
-What:		/sys/kernel/slab/cache/aliases
+What:		/sys/kernel/slab/<cache>/aliases
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -19,7 +19,7 @@ Description:
 		The aliases file is read-only and specifies how many caches
 		have merged into this cache.
 
-What:		/sys/kernel/slab/cache/align
+What:		/sys/kernel/slab/<cache>/align
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -28,7 +28,7 @@ Description:
 		The align file is read-only and specifies the cache's object
 		alignment in bytes.
 
-What:		/sys/kernel/slab/cache/alloc_calls
+What:		/sys/kernel/slab/<cache>/alloc_calls
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -37,9 +37,9 @@ Description:
 		The alloc_calls file is read-only and lists the kernel code
 		locations from which allocations for this cache were performed.
 		The alloc_calls file only contains information if debugging is
-		enabled for that cache (see Documentation/vm/slub.rst).
+		enabled for that cache (see Documentation/mm/slub.rst).
 
-What:		/sys/kernel/slab/cache/alloc_fastpath
+What:		/sys/kernel/slab/<cache>/alloc_fastpath
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -50,7 +50,7 @@ Description:
 		current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/alloc_from_partial
+What:		/sys/kernel/slab/<cache>/alloc_from_partial
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -62,7 +62,7 @@ Description:
 		count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/alloc_refill
+What:		/sys/kernel/slab/<cache>/alloc_refill
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -73,7 +73,7 @@ Description:
 		remote cpu frees.  It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/alloc_slab
+What:		/sys/kernel/slab/<cache>/alloc_slab
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -84,7 +84,7 @@ Description:
 		clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/alloc_slowpath
+What:		/sys/kernel/slab/<cache>/alloc_slowpath
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -96,7 +96,7 @@ Description:
 		clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/cache_dma
+What:		/sys/kernel/slab/<cache>/cache_dma
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -106,7 +106,7 @@ Description:
 		are from ZONE_DMA.
 		Available when CONFIG_ZONE_DMA is enabled.
 
-What:		/sys/kernel/slab/cache/cpu_slabs
+What:		/sys/kernel/slab/<cache>/cpu_slabs
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -115,7 +115,7 @@ Description:
 		The cpu_slabs file is read-only and displays how many cpu slabs
 		are active and their NUMA locality.
 
-What:		/sys/kernel/slab/cache/cpuslab_flush
+What:		/sys/kernel/slab/<cache>/cpuslab_flush
 Date:		April 2009
 KernelVersion:	2.6.31
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -128,7 +128,7 @@ Description:
 		current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/ctor
+What:		/sys/kernel/slab/<cache>/ctor
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -138,7 +138,7 @@ Description:
 		constructor function, which is invoked for each object when a
 		new slab is allocated.
 
-What:		/sys/kernel/slab/cache/deactivate_empty
+What:		/sys/kernel/slab/<cache>/deactivate_empty
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -148,7 +148,7 @@ Description:
 		was deactivated.  It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/deactivate_full
+What:		/sys/kernel/slab/<cache>/deactivate_full
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -158,7 +158,7 @@ Description:
 		was deactivated.  It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/deactivate_remote_frees
+What:		/sys/kernel/slab/<cache>/deactivate_remote_frees
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -169,7 +169,7 @@ Description:
 		remotely.  It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/deactivate_to_head
+What:		/sys/kernel/slab/<cache>/deactivate_to_head
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -180,7 +180,7 @@ Description:
 		list.  It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/deactivate_to_tail
+What:		/sys/kernel/slab/<cache>/deactivate_to_tail
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -191,7 +191,7 @@ Description:
 		list.  It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/destroy_by_rcu
+What:		/sys/kernel/slab/<cache>/destroy_by_rcu
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -200,7 +200,7 @@ Description:
 		The destroy_by_rcu file is read-only and specifies whether
 		slabs (not objects) are freed by rcu.
 
-What:		/sys/kernel/slab/cache/free_add_partial
+What:		/sys/kernel/slab/<cache>/free_add_partial
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -211,7 +211,7 @@ Description:
 		partial list.  It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/free_calls
+What:		/sys/kernel/slab/<cache>/free_calls
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -219,9 +219,9 @@ Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 Description:
 		The free_calls file is read-only and lists the locations of
 		object frees if slab debugging is enabled (see
-		Documentation/vm/slub.rst).
+		Documentation/mm/slub.rst).
 
-What:		/sys/kernel/slab/cache/free_fastpath
+What:		/sys/kernel/slab/<cache>/free_fastpath
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -232,7 +232,7 @@ Description:
 		It can be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/free_frozen
+What:		/sys/kernel/slab/<cache>/free_frozen
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -243,7 +243,7 @@ Description:
 		clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/free_remove_partial
+What:		/sys/kernel/slab/<cache>/free_remove_partial
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -255,7 +255,7 @@ Description:
 		count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/free_slab
+What:		/sys/kernel/slab/<cache>/free_slab
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -266,7 +266,7 @@ Description:
 		the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/free_slowpath
+What:		/sys/kernel/slab/<cache>/free_slowpath
 Date:		February 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -277,7 +277,7 @@ Description:
 		be written to clear the current count.
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/hwcache_align
+What:		/sys/kernel/slab/<cache>/hwcache_align
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -286,7 +286,7 @@ Description:
 		The hwcache_align file is read-only and specifies whether
 		objects are aligned on cachelines.
 
-What:		/sys/kernel/slab/cache/min_partial
+What:		/sys/kernel/slab/<cache>/min_partial
 Date:		February 2009
 KernelVersion:	2.6.30
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -297,7 +297,7 @@ Description:
 		allocating new slabs.  Such slabs may be reclaimed by utilizing
 		the shrink file.
 
-What:		/sys/kernel/slab/cache/object_size
+What:		/sys/kernel/slab/<cache>/object_size
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -306,7 +306,7 @@ Description:
 		The object_size file is read-only and specifies the cache's
 		object size.
 
-What:		/sys/kernel/slab/cache/objects
+What:		/sys/kernel/slab/<cache>/objects
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -315,7 +315,7 @@ Description:
 		The objects file is read-only and displays how many objects are
 		active and from which nodes they are from.
 
-What:		/sys/kernel/slab/cache/objects_partial
+What:		/sys/kernel/slab/<cache>/objects_partial
 Date:		April 2008
 KernelVersion:	2.6.26
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -325,7 +325,7 @@ Description:
 		objects are on partial slabs and from which nodes they are
 		from.
 
-What:		/sys/kernel/slab/cache/objs_per_slab
+What:		/sys/kernel/slab/<cache>/objs_per_slab
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -333,9 +333,9 @@ Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 Description:
 		The file objs_per_slab is read-only and specifies how many
 		objects may be allocated from a single slab of the order
-		specified in /sys/kernel/slab/cache/order.
+		specified in /sys/kernel/slab/<cache>/order.
 
-What:		/sys/kernel/slab/cache/order
+What:		/sys/kernel/slab/<cache>/order
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -352,7 +352,7 @@ Description:
 		order is used and this sysfs entry can not be used to change
 		the order at run time.
 
-What:		/sys/kernel/slab/cache/order_fallback
+What:		/sys/kernel/slab/<cache>/order_fallback
 Date:		April 2008
 KernelVersion:	2.6.26
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -365,7 +365,7 @@ Description:
 
 		Available when CONFIG_SLUB_STATS is enabled.
 
-What:		/sys/kernel/slab/cache/partial
+What:		/sys/kernel/slab/<cache>/partial
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -374,7 +374,7 @@ Description:
 		The partial file is read-only and displays how long many
 		partial slabs there are and how long each node's list is.
 
-What:		/sys/kernel/slab/cache/poison
+What:		/sys/kernel/slab/<cache>/poison
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -383,7 +383,7 @@ Description:
 		The poison file specifies whether objects should be poisoned
 		when a new slab is allocated.
 
-What:		/sys/kernel/slab/cache/reclaim_account
+What:		/sys/kernel/slab/<cache>/reclaim_account
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -392,7 +392,7 @@ Description:
 		The reclaim_account file specifies whether the cache's objects
 		are reclaimable (and grouped by their mobility).
 
-What:		/sys/kernel/slab/cache/red_zone
+What:		/sys/kernel/slab/<cache>/red_zone
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -401,7 +401,7 @@ Description:
 		The red_zone file specifies whether the cache's objects are red
 		zoned.
 
-What:		/sys/kernel/slab/cache/remote_node_defrag_ratio
+What:		/sys/kernel/slab/<cache>/remote_node_defrag_ratio
 Date:		January 2008
 KernelVersion:	2.6.25
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -415,7 +415,7 @@ Description:
 
 		Available when CONFIG_NUMA is enabled.
 
-What:		/sys/kernel/slab/cache/sanity_checks
+What:		/sys/kernel/slab/<cache>/sanity_checks
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -426,7 +426,7 @@ Description:
 		checks.  Caches that enable sanity_checks cannot be merged with
 		caches that do not.
 
-What:		/sys/kernel/slab/cache/shrink
+What:		/sys/kernel/slab/<cache>/shrink
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -442,7 +442,7 @@ Description:
 		adversely impact other running applications.  So it
 		should be used with care.
 
-What:		/sys/kernel/slab/cache/slab_size
+What:		/sys/kernel/slab/<cache>/slab_size
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -451,7 +451,7 @@ Description:
 		The slab_size file is read-only and specifies the object size
 		with metadata (debugging information and alignment) in bytes.
 
-What:		/sys/kernel/slab/cache/slabs
+What:		/sys/kernel/slab/<cache>/slabs
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -461,7 +461,7 @@ Description:
 		there are (both cpu and partial) and from which nodes they are
 		from.
 
-What:		/sys/kernel/slab/cache/store_user
+What:		/sys/kernel/slab/<cache>/store_user
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -470,7 +470,7 @@ Description:
 		The store_user file specifies whether the location of
 		allocation or free should be tracked for a cache.
 
-What:		/sys/kernel/slab/cache/total_objects
+What:		/sys/kernel/slab/<cache>/total_objects
 Date:		April 2008
 KernelVersion:	2.6.26
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -479,7 +479,7 @@ Description:
 		The total_objects file is read-only and displays how many total
 		objects a cache has and from which nodes they are from.
 
-What:		/sys/kernel/slab/cache/trace
+What:		/sys/kernel/slab/<cache>/trace
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -488,7 +488,7 @@ Description:
 		The trace file specifies whether object allocations and frees
 		should be traced.
 
-What:		/sys/kernel/slab/cache/validate
+What:		/sys/kernel/slab/<cache>/validate
 Date:		May 2007
 KernelVersion:	2.6.22
 Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
@@ -496,3 +496,24 @@ Contact:	Pekka Enberg <penberg@cs.helsinki.fi>,
 Description:
 		Writing to the validate file causes SLUB to traverse all of its
 		cache's objects and check the validity of metadata.
+
+What:		/sys/kernel/slab/<cache>/usersize
+Date:		Jun 2017
+Contact:	David Windsor <dave@nullcore.net>
+Description:
+		The usersize file is read-only and contains the usercopy
+		region size.
+
+What:		/sys/kernel/slab/<cache>/slabs_cpu_partial
+Date:		Aug 2011
+Contact:	Christoph Lameter <cl@linux.com>
+Description:
+		This read-only file shows the number of partialli allocated
+		frozen slabs.
+
+What:		/sys/kernel/slab/<cache>/cpu_partial
+Date:		Aug 2011
+Contact:	Christoph Lameter <cl@linux.com>
+Description:
+		This read-only file shows the number of per cpu partial
+		pages to keep around.
diff --git a/Documentation/ABI/testing/sysfs-kernel-warn_count b/Documentation/ABI/testing/sysfs-kernel-warn_count
new file mode 100644
index 000000000000..90a029813717
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-warn_count
@@ -0,0 +1,6 @@
+What:		/sys/kernel/warn_count
+Date:		November 2022
+KernelVersion:	6.2.0
+Contact:	Linux Kernel Hardening List <linux-hardening@vger.kernel.org>
+Description:
+		Shows how many times the system has Warned since last boot.
diff --git a/Documentation/ABI/testing/sysfs-mce b/Documentation/ABI/testing/sysfs-mce
new file mode 100644
index 000000000000..83172f50e27c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-mce
@@ -0,0 +1,97 @@
+What:		/sys/devices/system/machinecheck/machinecheckX/
+Contact:	Andi Kleen <ak@linux.intel.com>
+Date:		Feb, 2007
+Description:
+		(X = CPU number)
+
+		Machine checks report internal hardware error conditions
+		detected by the CPU. Uncorrected errors typically cause a
+		machine check (often with panic), corrected ones cause a
+		machine check log entry.
+
+		For more details about the x86 machine check architecture
+		see the Intel and AMD architecture manuals from their
+		developer websites.
+
+		For more details about the architecture
+		see http://one.firstfloor.org/~andi/mce.pdf
+
+		Each CPU has its own directory.
+
+What:		/sys/devices/system/machinecheck/machinecheckX/bank<Y>
+Contact:	Andi Kleen <ak@linux.intel.com>
+Date:		Feb, 2007
+Description:
+		(Y bank number)
+
+		64bit Hex bitmask enabling/disabling specific subevents for
+		bank Y.
+
+		When a bit in the bitmask is zero then the respective
+		subevent will not be reported.
+
+		By default all events are enabled.
+
+		Note that BIOS maintain another mask to disable specific events
+		per bank.  This is not visible here
+
+What:		/sys/devices/system/machinecheck/machinecheckX/check_interval
+Contact:	Andi Kleen <ak@linux.intel.com>
+Date:		Feb, 2007
+Description:
+		The entries appear for each CPU, but they are truly shared
+		between all CPUs.
+
+		How often to poll for corrected machine check errors, in
+		seconds (Note output is hexadecimal). Default 5 minutes.
+		When the poller finds MCEs it triggers an exponential speedup
+		(poll more often) on the polling interval.  When the poller
+		stops finding MCEs, it triggers an exponential backoff
+		(poll less often) on the polling interval. The check_interval
+		variable is both the initial and maximum polling interval.
+		0 means no polling for corrected machine check errors
+		(but some corrected errors might be still reported
+		in other ways)
+
+What:		/sys/devices/system/machinecheck/machinecheckX/trigger
+Contact:	Andi Kleen <ak@linux.intel.com>
+Date:		Feb, 2007
+Description:
+		The entries appear for each CPU, but they are truly shared
+		between all CPUs.
+
+		Program to run when a machine check event is detected.
+		This is an alternative to running mcelog regularly from cron
+		and allows to detect events faster.
+
+What:		/sys/devices/system/machinecheck/machinecheckX/monarch_timeout
+Contact:	Andi Kleen <ak@linux.intel.com>
+Date:		Feb, 2007
+Description:
+		How long to wait for the other CPUs to machine check too on a
+		exception. 0 to disable waiting for other CPUs.
+
+		Unit: us
+
+What:		/sys/devices/system/machinecheck/machinecheckX/ignore_ce
+Contact:	Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
+Date:		Jun 2009
+Description:
+		Disables polling and CMCI for corrected errors.
+		All corrected events are not cleared and kept in bank MSRs.
+
+What:		/sys/devices/system/machinecheck/machinecheckX/dont_log_ce
+Contact:	Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
+Date:		Jun 2009
+Description:
+		Disables logging for corrected errors.
+		All reported corrected errors will be cleared silently.
+
+		This option will be useful if you never care about corrected
+		errors.
+
+What:		/sys/devices/system/machinecheck/machinecheckX/cmci_disabled
+Contact:	Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
+Date:		Jun 2009
+Description:
+		Disables the CMCI feature.
diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module
index 88bddf192ceb..08886367d047 100644
--- a/Documentation/ABI/testing/sysfs-module
+++ b/Documentation/ABI/testing/sysfs-module
@@ -41,6 +41,13 @@ KernelVersion:	3.3
 Contact:	Kay Sievers <kay.sievers@vrfy.org>
 Description:	Module size in bytes.
 
+What:		/sys/module/*/initstate
+Date:		Nov 2006
+KernelVersion:	2.6.19
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:	Show the initialization state(live, coming, going) of
+		the module.
+
 What:		/sys/module/*/taint
 Date:		Jan 2012
 KernelVersion:	3.3
diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi
index 04885738cf15..a77a004a1baa 100644
--- a/Documentation/ABI/testing/sysfs-platform-asus-wmi
+++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi
@@ -57,3 +57,44 @@ Description:
 			* 0 - default,
 			* 1 - overboost,
 			* 2 - silent
+
+What:		/sys/devices/platform/<platform>/gpu_mux_mode
+Date:		Aug 2022
+KernelVersion:	6.1
+Contact:	"Luke Jones" <luke@ljones.dev>
+Description:
+		Switch the GPU hardware MUX mode. Laptops with this feature can
+		can be toggled to boot with only the dGPU (discrete mode) or in
+		standard Optimus/Hybrid mode. On switch a reboot is required:
+
+			* 0 - Discrete GPU,
+			* 1 - Optimus/Hybrid,
+
+What:		/sys/devices/platform/<platform>/dgpu_disable
+Date:		Aug 2022
+KernelVersion:	5.17
+Contact:	"Luke Jones" <luke@ljones.dev>
+Description:
+		Disable discrete GPU:
+			* 0 - Enable dGPU,
+			* 1 - Disable dGPU
+
+What:		/sys/devices/platform/<platform>/egpu_enable
+Date:		Aug 2022
+KernelVersion:	5.17
+Contact:	"Luke Jones" <luke@ljones.dev>
+Description:
+		Enable the external GPU paired with ROG X-Flow laptops.
+		Toggling this setting will also trigger ACPI to disable the dGPU:
+
+			* 0 - Disable,
+			* 1 - Enable
+
+What:		/sys/devices/platform/<platform>/panel_od
+Date:		Aug 2022
+KernelVersion:	5.17
+Contact:	"Luke Jones" <luke@ljones.dev>
+Description:
+		Enable an LCD response-time boost to reduce or remove ghosting:
+			* 0 - Disable,
+			* 1 - Enable
diff --git a/Documentation/ABI/testing/sysfs-platform-brcmstb-memc b/Documentation/ABI/testing/sysfs-platform-brcmstb-memc
new file mode 100644
index 000000000000..2f2b750ac2fd
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-brcmstb-memc
@@ -0,0 +1,15 @@
+What:		/sys/bus/platform/devices/*/srpd
+Date:		July 2022
+KernelVersion:	5.21
+Contact:	Florian Fainelli <f.fainelli@gmail.com>
+Description:
+		Self Refresh Power Down (SRPD) inactivity timeout counted in
+		internal DDR controller clock cycles. Possible values range
+		from 0 (disable inactivity timeout) to 65535 (0xffff).
+
+What:		/sys/bus/platform/devices/*/frequency
+Date:		July 2022
+KernelVersion:	5.21
+Contact:	Florian Fainelli <f.fainelli@gmail.com>
+Description:
+		DDR PHY frequency in Hz.
diff --git a/Documentation/ABI/testing/sysfs-platform-chipidea-usb2 b/Documentation/ABI/testing/sysfs-platform-chipidea-usb2
index b0f4684a83fe..b9f7d924f28a 100644
--- a/Documentation/ABI/testing/sysfs-platform-chipidea-usb2
+++ b/Documentation/ABI/testing/sysfs-platform-chipidea-usb2
@@ -2,8 +2,8 @@ What:		/sys/bus/platform/devices/ci_hdrc.0/role
 Date:		Mar 2017
 Contact:	Peter Chen <peter.chen@nxp.com>
 Description:
-		It returns string "gadget" or "host" when read it, it indicates
-		current controller role.
+		When read, it returns string "gadget" or "host", indicating
+		the current controller role.
 
-		It will do role switch when write "gadget" or "host" to it.
+		It will do role switch when "gadget" or "host" is written to it.
 		Only controller at dual-role configuration supports writing.
diff --git a/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi b/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi
index 7f9e18705861..1f1f274a6979 100644
--- a/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi
+++ b/Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi
@@ -1,55 +1,71 @@
 What:		/sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_supported_type
 Date:		Apr 2021
 KernelVersion:	5.13
-Contact:	"perry.yuan@dell.com>"
+Contact:	"<perry.yuan@dell.com>"
 Description:
 		Display which dell hardware level privacy devices are supported
 		“Dell Privacy” is a set of HW, FW, and SW features to enhance
 		Dell’s commitment to platform privacy for MIC, Camera, and
 		ePrivacy screens.
 		The supported hardware privacy devices are:
-Attributes:
-		Microphone Mute:
+
+		Attributes:
+			Microphone Mute:
 				Identifies the local microphone can be muted by hardware, no applications
 				is available to capture system mic sound
 
-		Camera Shutter:
+			Camera Shutter:
 				Identifies camera shutter controlled by hardware, which is a micromechanical
 				shutter assembly that is built onto the camera module to block capturing images
 				from outside the laptop
 
-		supported:
+		Values:
+
+			supported:
 				The privacy device is supported by this system
 
-		unsupported:
+			unsupported:
 				The privacy device is not supported on this system
 
-		For example to check which privacy devices are supported:
+		For example to check which privacy devices are supported::
 
-		# cat /sys/bus/wmi/drivers/dell-privacy/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_supported_type
-		[Microphone Mute] [supported]
-		[Camera Shutter] [supported]
-		[ePrivacy Screen] [unsupported]
+		    # cat /sys/bus/wmi/drivers/dell-privacy/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_supported_type
+		    [Microphone Mute] [supported]
+		    [Camera Shutter] [supported]
+		    [ePrivacy Screen] [unsupported]
 
 What:		/sys/bus/wmi/devices/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_current_state
 Date:		Apr 2021
 KernelVersion:	5.13
-Contact:	"perry.yuan@dell.com>"
+Contact:	"<perry.yuan@dell.com>"
 Description:
 		Allow user space to check current dell privacy device state.
 		Describes the Device State class exposed by BIOS which can be
 		consumed by various applications interested in knowing the Privacy
 		feature capabilities
-Attributes:
-		muted:
-			Identifies the privacy device is turned off and cannot send stream to OS applications
 
-		unmuted:
-			Identifies the privacy device is turned on ,audio or camera driver can get
-			stream from mic and camera module to OS applications
+		Attributes:
+			Microphone:
+				Identifies the local microphone can be muted by hardware, no applications
+				is available to capture system mic sound
+
+			Camera Shutter:
+				Identifies camera shutter controlled by hardware, which is a micromechanical
+				shutter assembly that is built onto the camera module to block capturing images
+				from outside the laptop
+
+		Values:
+			muted:
+				Identifies the privacy device is turned off
+				and cannot send stream to OS applications
+
+			unmuted:
+				Identifies the privacy device is turned on,
+				audio or camera driver can get stream from mic
+				and camera module to OS applications
 
-		For example to check all supported current privacy device states:
+		For example to check all supported current privacy device states::
 
-		# cat /sys/bus/wmi/drivers/dell-privacy/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_current_state
-		[Microphone] [unmuted]
-		[Camera Shutter] [unmuted]
+		    # cat /sys/bus/wmi/drivers/dell-privacy/6932965F-1671-4CEB-B988-D3AB0A901919/dell_privacy_current_state
+		    [Microphone] [unmuted]
+		    [Camera Shutter] [unmuted]
diff --git a/Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv b/Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv
new file mode 100644
index 000000000000..1d97ad615c66
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv
@@ -0,0 +1,7 @@
+What:		/sys/class/power_supply/<battery_name>/eppid
+Date:		September 2022
+KernelVersion:	6.1
+Contact:	Armin Wolf <W_Armin@gmx.de>
+Description:
+		Reports the Dell ePPID (electronic Dell Piece Part Identification)
+		of the ACPI battery.
diff --git a/Documentation/ABI/testing/sysfs-platform-dptf b/Documentation/ABI/testing/sysfs-platform-dptf
index 53c6b1000320..620fd20434a5 100644
--- a/Documentation/ABI/testing/sysfs-platform-dptf
+++ b/Documentation/ABI/testing/sysfs-platform-dptf
@@ -133,7 +133,10 @@ Contact:	linux-acpi@vger.kernel.org
 Description:
 		(RO) Presents SSC (spread spectrum clock) information for EMI
 		(Electro magnetic interference) control. This is a bit mask.
+
+		=======	==========================================
 		Bits	Description
+		=======	==========================================
 		[7:0]	Sets clock spectrum spread percentage:
 			0x00=0.2% , 0x3F=10%
 			1 LSB = 0.1% increase in spread (for
@@ -151,3 +154,4 @@ Description:
 		[10]	0: No white noise. 1: Add white noise
 			to spread waveform
 		[11]	When 1, future writes are ignored.
+		=======	==========================================
diff --git a/Documentation/ABI/testing/sysfs-platform-intel-ifs b/Documentation/ABI/testing/sysfs-platform-intel-ifs
new file mode 100644
index 000000000000..41b4d5b1e21c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-intel-ifs
@@ -0,0 +1,52 @@
+Device instance to test mapping
+intel_ifs_0  ->  Scan Test
+intel_ifs_1  ->  Array BIST test
+
+What:		/sys/devices/virtual/misc/intel_ifs_<N>/run_test
+Date:		Nov 16 2022
+KernelVersion:	6.2
+Contact:	"Jithu Joseph" <jithu.joseph@intel.com>
+Description:	Write <cpu#> to trigger IFS test for one online core.
+		Note that the test is per core. The cpu# can be
+		for any thread on the core. Running on one thread
+		completes the test for the core containing that thread.
+		Example: to test the core containing cpu5: echo 5 >
+		/sys/devices/virtual/misc/intel_ifs_<N>/run_test
+Devices:	all
+
+What:		/sys/devices/virtual/misc/intel_ifs_<N>/status
+Date:		Nov 16 2022
+KernelVersion:	6.2
+Contact:	"Jithu Joseph" <jithu.joseph@intel.com>
+Description:	The status of the last test. It can be one of "pass", "fail"
+		or "untested".
+Devices:	all
+
+What:		/sys/devices/virtual/misc/intel_ifs_<N>/details
+Date:		Nov 16 2022
+KernelVersion:	6.2
+Contact:	"Jithu Joseph" <jithu.joseph@intel.com>
+Description:	Additional information regarding the last test. The details file reports
+		the hex value of the STATUS MSR for this test. Note that the error_code field
+		may contain driver defined software code not defined in the Intel SDM.
+Devices:	all
+
+What:		/sys/devices/virtual/misc/intel_ifs_<N>/image_version
+Date:		Nov 16 2022
+KernelVersion:	6.2
+Contact:	"Jithu Joseph" <jithu.joseph@intel.com>
+Description:	Version (hexadecimal) of loaded IFS test image. If no test image
+		is loaded reports "none". Only present for device instances where a test image
+		is applicable.
+Devices:	intel_ifs_0
+
+What:		/sys/devices/virtual/misc/intel_ifs_<N>/current_batch
+Date:		Nov 16 2022
+KernelVersion:	6.2
+Contact:	"Jithu Joseph" <jithu.joseph@intel.com>
+Description:	Write a number less than or equal to 0xff to load an IFS test image.
+		The number written treated as the 2 digit suffix in the following file name:
+		/lib/firmware/intel/ifs_<N>/ff-mm-ss-02x.scan
+		Reading the file will provide the suffix of the currently loaded IFS test image.
+		This file is present only for device instances where a test image is applicable.
+Devices:	intel_ifs_0
diff --git a/Documentation/ABI/testing/sysfs-platform-intel-pmc b/Documentation/ABI/testing/sysfs-platform-intel-pmc
index ef199af75ab0..f31d59b21f9b 100644
--- a/Documentation/ABI/testing/sysfs-platform-intel-pmc
+++ b/Documentation/ABI/testing/sysfs-platform-intel-pmc
@@ -11,8 +11,10 @@ Description:
 		to take effect.
 
 		Display global reset setting bits for PMC.
+
 			* bit 31 - global reset is locked
 			* bit 20 - global reset is set
+
 		Writing bit 20 value to the etr3 will induce
 		a platform "global reset" upon consequent platform reset,
 		in case the register is not locked.
diff --git a/Documentation/ABI/testing/sysfs-platform-lg-laptop b/Documentation/ABI/testing/sysfs-platform-lg-laptop
index cf47749b19df..0570cd524d0e 100644
--- a/Documentation/ABI/testing/sysfs-platform-lg-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-lg-laptop
@@ -17,6 +17,7 @@ Date:		October 2018
 KernelVersion:	4.20
 Contact:	"Matan Ziv-Av <matan@svgalib.org>
 Description:
+        Deprecated use /sys/class/power_supply/CMB0/charge_control_end_threshold
         Maximal battery charge level. Accepted values are 80 or 100.
 
 What:		/sys/devices/platform/lg-laptop/fan_mode
diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
index e79ca22e2f45..9b99a81babb1 100644
--- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
+++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl
@@ -68,3 +68,10 @@ Description:
 		Wasted   burnt and invalid
 		Invalid  not burnt but marked as valid (error state).
 		=======  ===============================================
+
+What:		/sys/bus/platform/devices/MLNXBF04:00/bootfifo
+Date:		Apr 2023
+KernelVersion:	6.4
+Contact:	"Liming Sun <limings@nvidia.com>"
+Description:
+		The file used to access the BlueField boot fifo.
diff --git a/Documentation/ABI/testing/sysfs-platform-sst-atom b/Documentation/ABI/testing/sysfs-platform-sst-atom
index d5f6e21f0e42..0154b0fba759 100644
--- a/Documentation/ABI/testing/sysfs-platform-sst-atom
+++ b/Documentation/ABI/testing/sysfs-platform-sst-atom
@@ -1,4 +1,4 @@
-What:		/sys/devices/platform/8086%x:00/firmware_version
+What:		/sys/devices/platform/8086<x>:00/firmware_version
 Date:		November 2016
 KernelVersion:	4.10
 Contact:	"Sebastien Guiriec" <sebastien.guiriec@intel.com>
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power
index 90ec4987074b..a3942b1036e2 100644
--- a/Documentation/ABI/testing/sysfs-power
+++ b/Documentation/ABI/testing/sysfs-power
@@ -152,7 +152,7 @@ Description:
 		case further investigation is required to determine which
 		device is causing the problem.  Note that genuine RTC clock
 		values (such as when pm_trace has not been used), can still
-		match a device and output it's name here.
+		match a device and output its name here.
 
 What:		/sys/power/pm_async
 Date:		January 2009
@@ -413,6 +413,35 @@ Description:
 		The /sys/power/suspend_stats/last_failed_step file contains
 		the last failed step in the suspend/resume path.
 
+What:		/sys/power/suspend_stats/last_hw_sleep
+Date:		June 2023
+Contact:	Mario Limonciello <mario.limonciello@amd.com>
+Description:
+		The /sys/power/suspend_stats/last_hw_sleep file
+		contains the duration of time spent in a hardware sleep
+		state in the most recent system suspend-resume cycle.
+		This number is measured in microseconds.
+
+What:		/sys/power/suspend_stats/total_hw_sleep
+Date:		June 2023
+Contact:	Mario Limonciello <mario.limonciello@amd.com>
+Description:
+		The /sys/power/suspend_stats/total_hw_sleep file
+		contains the aggregate of time spent in a hardware sleep
+		state since the kernel was booted. This number
+		is measured in microseconds.
+
+What:		/sys/power/suspend_stats/max_hw_sleep
+Date:		June 2023
+Contact:	Mario Limonciello <mario.limonciello@amd.com>
+Description:
+		The /sys/power/suspend_stats/max_hw_sleep file
+		contains the maximum amount of time that the hardware can
+		report for time spent in a hardware sleep state. When sleep
+		cycles are longer than this time, the values for
+		'total_hw_sleep' and 'last_hw_sleep' may not be accurate.
+		This number is measured in microseconds.
+
 What:		/sys/power/sync_on_suspend
 Date:		October 2019
 Contact:	Jonas Meurer <jonas@freesources.org>
diff --git a/Documentation/ABI/testing/sysfs-ptp b/Documentation/ABI/testing/sysfs-ptp
index d378f57c1b73..9c317ac7c47a 100644
--- a/Documentation/ABI/testing/sysfs-ptp
+++ b/Documentation/ABI/testing/sysfs-ptp
@@ -6,7 +6,7 @@ Description:
 		providing a standardized interface to the ancillary
 		features of PTP hardware clocks.
 
-What:		/sys/class/ptp/ptpN/
+What:		/sys/class/ptp/ptp<N>/
 Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
@@ -14,7 +14,7 @@ Description:
 		hardware clock registered into the PTP class driver
 		subsystem.
 
-What:		/sys/class/ptp/ptpN/clock_name
+What:		/sys/class/ptp/ptp<N>/clock_name
 Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
@@ -25,7 +25,7 @@ Description:
 		MAC based ones. The string does not necessarily have
 		to be any kind of unique id.
 
-What:		/sys/class/ptp/ptpN/max_adjustment
+What:		/sys/class/ptp/ptp<N>/max_adjustment
 Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
@@ -33,42 +33,42 @@ Description:
 		frequency adjustment value (a positive integer) in
 		parts per billion.
 
-What:		/sys/class/ptp/ptpN/max_vclocks
+What:		/sys/class/ptp/ptp<N>/max_vclocks
 Date:		May 2021
 Contact:	Yangbo Lu <yangbo.lu@nxp.com>
 Description:
 		This file contains the maximum number of ptp vclocks.
 		Write integer to re-configure it.
 
-What:		/sys/class/ptp/ptpN/n_alarms
+What:		/sys/class/ptp/ptp<N>/n_alarms
 Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
 		This file contains the number of periodic or one shot
 		alarms offer by the PTP hardware clock.
 
-What:		/sys/class/ptp/ptpN/n_external_timestamps
+What:		/sys/class/ptp/ptp<N>/n_external_timestamps
 Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
 		This file contains the number of external timestamp
 		channels offered by the PTP hardware clock.
 
-What:		/sys/class/ptp/ptpN/n_periodic_outputs
+What:		/sys/class/ptp/ptp<N>/n_periodic_outputs
 Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
 		This file contains the number of programmable periodic
 		output channels offered by the PTP hardware clock.
 
-What:		/sys/class/ptp/ptpN/n_pins
+What:		/sys/class/ptp/ptp<N>/n_pins
 Date:		March 2014
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
 		This file contains the number of programmable pins
 		offered by the PTP hardware clock.
 
-What:		/sys/class/ptp/ptpN/n_vclocks
+What:		/sys/class/ptp/ptp<N>/n_vclocks
 Date:		May 2021
 Contact:	Yangbo Lu <yangbo.lu@nxp.com>
 Description:
@@ -81,7 +81,7 @@ Description:
 		switches the physical clock back to normal, adjustable
 		operation.
 
-What:		/sys/class/ptp/ptpN/pins
+What:		/sys/class/ptp/ptp<N>/pins
 Date:		March 2014
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
@@ -94,7 +94,7 @@ Description:
 		assignment may be changed by two writing numbers into
 		the file.
 
-What:		/sys/class/ptp/ptpN/pps_available
+What:		/sys/class/ptp/ptp<N>/pps_available
 Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
@@ -103,7 +103,7 @@ Description:
 		"1" means that the PPS is supported, while "0" means
 		not supported.
 
-What:		/sys/class/ptp/ptpN/extts_enable
+What:		/sys/class/ptp/ptp<N>/extts_enable
 Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
@@ -113,7 +113,7 @@ Description:
 		To disable external timestamps, write the channel
 		index followed by a "0" into the file.
 
-What:		/sys/class/ptp/ptpN/fifo
+What:		/sys/class/ptp/ptp<N>/fifo
 Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
@@ -121,7 +121,7 @@ Description:
 		the form of three integers: channel index, seconds,
 		and nanoseconds.
 
-What:		/sys/class/ptp/ptpN/period
+What:		/sys/class/ptp/ptp<N>/period
 Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
@@ -132,7 +132,7 @@ Description:
 		period nanoseconds. To disable a periodic output, set
 		all the seconds and nanoseconds values to zero.
 
-What:		/sys/class/ptp/ptpN/pps_enable
+What:		/sys/class/ptp/ptp<N>/pps_enable
 Date:		September 2010
 Contact:	Richard Cochran <richardcochran@gmail.com>
 Description:
diff --git a/Documentation/ABI/testing/sysfs-secvar b/Documentation/ABI/testing/sysfs-secvar
index feebb8c57294..857cf12b0904 100644
--- a/Documentation/ABI/testing/sysfs-secvar
+++ b/Documentation/ABI/testing/sysfs-secvar
@@ -18,6 +18,14 @@ Description:	A string indicating which backend is in use by the firmware.
 		This determines the format of the variable and the accepted
 		format of variable updates.
 
+		On powernv/OPAL, this value is provided by the OPAL firmware
+		and is expected to be "ibm,edk2-compat-v1".
+
+		On pseries/PLPKS, this is generated by the kernel based on the
+		version number in the SB_VERSION variable in the keystore, and
+		has the form "ibm,plpks-sb-v<version>", or
+		"ibm,plpks-sb-unknown" if there is no SB_VERSION variable.
+
 What:		/sys/firmware/secvar/vars/<variable name>
 Date:		August 2019
 Contact:	Nayna Jain <nayna@linux.ibm.com>
@@ -34,7 +42,7 @@ Description:	An integer representation of the size of the content of the
 
 What:		/sys/firmware/secvar/vars/<variable_name>/data
 Date:		August 2019
-Contact:	Nayna Jain h<nayna@linux.ibm.com>
+Contact:	Nayna Jain <nayna@linux.ibm.com>
 Description:	A read-only file containing the value of the variable. The size
 		of the file represents the maximum size of the variable data.
 
@@ -44,3 +52,68 @@ Contact:	Nayna Jain <nayna@linux.ibm.com>
 Description:	A write-only file that is used to submit the new value for the
 		variable. The size of the file represents the maximum size of
 		the variable data that can be written.
+
+What:		/sys/firmware/secvar/config
+Date:		February 2023
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	This optional directory contains read-only config attributes as
+		defined by the secure variable implementation.  All data is in
+		ASCII format. The directory is only created if the backing
+		implementation provides variables to populate it, which at
+		present is only PLPKS on the pseries platform.
+
+What:		/sys/firmware/secvar/config/version
+Date:		February 2023
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	Config version as reported by the hypervisor in ASCII decimal
+		format.
+
+		Currently only provided by PLPKS on the pseries platform.
+
+What:		/sys/firmware/secvar/config/max_object_size
+Date:		February 2023
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	Maximum allowed size of	objects in the keystore in bytes,
+		represented in ASCII decimal format.
+
+		This is not necessarily the same as the max size that can be
+		written to an update file as writes can contain more than
+		object data, you should use the size of the update file for
+		that purpose.
+
+		Currently only provided by PLPKS on the pseries platform.
+
+What:		/sys/firmware/secvar/config/total_size
+Date:		February 2023
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	Total size of the PLPKS in bytes, represented in ASCII decimal
+		format.
+
+		Currently only provided by PLPKS on the pseries platform.
+
+What:		/sys/firmware/secvar/config/used_space
+Date:		February 2023
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	Current space consumed by the key store, in bytes, represented
+		in ASCII decimal format.
+
+		Currently only provided by PLPKS on the pseries platform.
+
+What:		/sys/firmware/secvar/config/supported_policies
+Date:		February 2023
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	Bitmask of supported policy flags by the hypervisor,
+		represented as an 8 byte hexadecimal ASCII string. Consult the
+		hypervisor documentation for what these flags are.
+
+		Currently only provided by PLPKS on the pseries platform.
+
+What:		/sys/firmware/secvar/config/signed_update_algorithms
+Date:		February 2023
+Contact:	Nayna Jain <nayna@linux.ibm.com>
+Description:	Bitmask of flags indicating which algorithms the hypervisor
+		supports for signed update of objects, represented as a 16 byte
+		hexadecimal ASCII string. Consult the hypervisor documentation
+		for what these flags mean.
+
+		Currently only provided by PLPKS on the pseries platform.
diff --git a/Documentation/ABI/testing/sysfs-timecard b/Documentation/ABI/testing/sysfs-timecard
new file mode 100644
index 000000000000..220478156297
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-timecard
@@ -0,0 +1,288 @@
+What:		/sys/class/timecard/
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	This directory contains files and directories
+		providing a standardized interface to the ancillary
+		features of the OpenCompute timecard.
+
+What:		/sys/class/timecard/ocpN/
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	This directory contains the attributes of the Nth timecard
+		registered.
+
+What:		/sys/class/timecard/ocpN/available_clock_sources
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) The list of available time sources that the PHC
+		uses for clock adjustments.
+
+		====  =================================================
+                NONE  no adjustments
+                PPS   adjustments come from the PPS1 selector (default)
+                TOD   adjustments from the GNSS/TOD module
+                IRIG  adjustments from external IRIG-B signal
+                DCF   adjustments from external DCF signal
+                ====  =================================================
+
+What:		/sys/class/timecard/ocpN/available_sma_inputs
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Set of available destinations (sinks) for a SMA
+		input signal.
+
+                =====  ================================================
+                10Mhz  signal is used as the 10Mhz reference clock
+                PPS1   signal is sent to the PPS1 selector
+                PPS2   signal is sent to the PPS2 selector
+                TS1    signal is sent to timestamper 1
+                TS2    signal is sent to timestamper 2
+                TS3    signal is sent to timestamper 3
+                TS4    signal is sent to timestamper 4
+                IRIG   signal is sent to the IRIG-B module
+                DCF    signal is sent to the DCF module
+                FREQ1  signal is sent to frequency counter 1
+                FREQ2  signal is sent to frequency counter 2
+                FREQ3  signal is sent to frequency counter 3
+                FREQ4  signal is sent to frequency counter 4
+                None   signal input is disabled
+                =====  ================================================
+
+What:		/sys/class/timecard/ocpN/available_sma_outputs
+Date:		May 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Set of available sources for a SMA output signal.
+
+                =====  ================================================
+                10Mhz  output is from the 10Mhz reference clock
+                PHC    output PPS is from the PHC clock
+                MAC    output PPS is from the Miniature Atomic Clock
+                GNSS1  output PPS is from the first GNSS module
+                GNSS2  output PPS is from the second GNSS module
+                IRIG   output is from the PHC, in IRIG-B format
+                DCF    output is from the PHC, in DCF format
+                GEN1   output is from frequency generator 1
+                GEN2   output is from frequency generator 2
+                GEN3   output is from frequency generator 3
+                GEN4   output is from frequency generator 4
+                GND    output is GND
+                VCC    output is VCC
+                =====  ================================================
+
+What:		/sys/class/timecard/ocpN/clock_source
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RW) Contains the current synchronization source used by
+		the PHC.  May be changed by writing one of the listed
+		values from the available_clock_sources attribute set.
+
+What:		/sys/class/timecard/ocpN/clock_status_drift
+Date:		March 2022
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Contains the current drift value used by the firmware
+		for internal disciplining of the atomic clock.
+
+What:		/sys/class/timecard/ocpN/clock_status_offset
+Date:		March 2022
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Contains the current offset value used by the firmware
+		for internal disciplining of the atomic clock.
+
+What:		/sys/class/timecard/ocpN/freqX
+Date:		March 2022
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Optional directory containing the sysfs nodes for
+		frequency counter <X>.
+
+What:		/sys/class/timecard/ocpN/freqX/frequency
+Date:		March 2022
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Contains the measured frequency over the specified
+		measurement period.
+
+What:		/sys/class/timecard/ocpN/freqX/seconds
+Date:		March 2022
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RW) Specifies the number of seconds from 0-255 that the
+		frequency should be measured over.  Write 0 to disable.
+
+What:		/sys/class/timecard/ocpN/genX
+Date:		March 2022
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Optional directory containing the sysfs nodes for
+		frequency generator <X>.
+
+What:		/sys/class/timecard/ocpN/genX/duty
+Date:		March 2022
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Specifies the signal duty cycle as a percentage from 1-99.
+
+What:		/sys/class/timecard/ocpN/genX/period
+Date:		March 2022
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Specifies the signal period in nanoseconds.
+
+What:		/sys/class/timecard/ocpN/genX/phase
+Date:		March 2022
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Specifies the signal phase offset in nanoseconds.
+
+What:		/sys/class/timecard/ocpN/genX/polarity
+Date:		March 2022
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Specifies the signal polarity, either 1 or 0.
+
+What:		/sys/class/timecard/ocpN/genX/running
+Date:		March 2022
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Either 0 or 1, showing if the signal generator is running.
+
+What:		/sys/class/timecard/ocpN/genX/start
+Date:		March 2022
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Shows the time in <sec>.<nsec> that the signal generator
+		started running.
+
+What:		/sys/class/timecard/ocpN/genX/signal
+Date:		March 2022
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RW) Used to start the signal generator, and summarize
+		the current status.
+
+		The signal generator may be started by writing the signal
+		period, followed by the optional signal values.  If the
+		optional values are not provided, they default to the current
+		settings, which may be obtained from the other sysfs nodes.
+
+		    period [duty [phase [polarity]]]
+
+		echo 500000000 > signal       # 1/2 second period
+		echo 1000000 40 100 > signal
+		echo 0 > signal               # turn off generator
+
+		Period and phase are specified in nanoseconds.  Duty cycle is
+		a percentage from 1-99.  Polarity is 1 or 0.
+
+		Reading this node will return:
+
+		    period duty phase polarity start_time
+
+What:		/sys/class/timecard/ocpN/gnss_sync
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Indicates whether a valid GNSS signal is received,
+		or when the signal was lost.
+
+What:		/sys/class/timecard/ocpN/i2c
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	This optional attribute links to the associated i2c device.
+
+What:		/sys/class/timecard/ocpN/irig_b_mode
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RW) An integer from 0-7 indicating the timecode format
+		of the IRIG-B output signal: B00<n>
+
+What:		/sys/class/timecard/ocpN/pps
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	This optional attribute links to the associated PPS device.
+
+What:		/sys/class/timecard/ocpN/ptp
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	This attribute links to the associated PTP device.
+
+What:		/sys/class/timecard/ocpN/serialnum
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Provides the serial number of the timecard.
+
+What:		/sys/class/timecard/ocpN/sma1
+What:		/sys/class/timecard/ocpN/sma2
+What:		/sys/class/timecard/ocpN/sma3
+What:		/sys/class/timecard/ocpN/sma4
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RW) These attributes specify the direction of the signal
+		on the associated SMA connectors, and also the signal sink
+		or source.
+
+		The display format of the attribute is a space separated
+		list of signals, prefixed by the input/output direction.
+
+		The signal direction may be changed (if supported) by
+		prefixing the signal list with either "in:" or "out:".
+		If neither prefix is present, then the direction is unchanged.
+
+		The output signal may be changed by writing one of the listed
+		values from the available_sma_outputs attribute set.
+
+		The input destinations may be changed by writing multiple
+		values from the available_sma_inputs attribute set,
+		separated by spaces.  If there are duplicated input
+		destinations between connectors, the lowest numbered SMA
+		connector is given priority.
+
+		Note that not all input combinations may make sense.
+
+		The 10Mhz reference clock input is currently only valid
+		on SMA1 and may not be combined with other destination sinks.
+
+What:		/sys/class/timecard/ocpN/tod_correction
+Date:		March 2022
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RW) The incoming GNSS signal is in UTC time, and the NMEA
+		format messages do not provide a TAI offset.  This sets the
+		correction value for the incoming time.
+
+		If UBX_LS is enabled, this should be 0, and the offset is
+		taken from the UBX-NAV-TIMELS message.
+
+What:		/sys/class/timecard/ocpN/ts_window_adjust
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RW) When retrieving the PHC with the PTP SYS_OFFSET_EXTENDED
+		ioctl, a system timestamp is made before and after the PHC
+		time is retrieved.  The midpoint between the two system
+		timestamps is usually taken to be the SYS time associated
+		with the PHC time.  This estimate may be wrong, as it depends
+		on PCI latencies, and when the PHC time was latched
+
+		The attribute value reduces the end timestamp by the given
+		number of nanoseconds, so the computed midpoint matches the
+		retrieved PHC time.
+
+		The initial value is set based on measured PCI latency and
+		the estimated point where the FPGA latches the PHC time.  This
+		value may be changed by writing an unsigned integer.
+
+What:		/sys/class/timecard/ocpN/ttyGNSS
+What:		/sys/class/timecard/ocpN/ttyGNSS2
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	These optional attributes link to the TTY serial ports
+		associated with the GNSS devices.
+
+What:		/sys/class/timecard/ocpN/ttyMAC
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	This optional attribute links to the TTY serial port
+		associated with the Miniature Atomic Clock.
+
+What:		/sys/class/timecard/ocpN/ttyNMEA
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	This optional attribute links to the TTY serial port
+		which outputs the PHC time in NMEA ZDA format.
+
+What:		/sys/class/timecard/ocpN/utc_tai_offset
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RW) The DCF and IRIG output signals are in UTC, while the
+		TimeCard operates on TAI.  This attribute allows setting the
+		offset in seconds, which is added to the TAI timebase for
+		these formats.
+
+		The offset may be changed by writing an unsigned integer.
diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty
index e157130a6792..820e412d38a8 100644
--- a/Documentation/ABI/testing/sysfs-tty
+++ b/Documentation/ABI/testing/sysfs-tty
@@ -9,7 +9,7 @@ Description:
 		 The file supports poll() to detect virtual
 		 console switches.
 
-What:		/sys/class/tty/tty0/active
+What:		/sys/class/tty/tty<x>/active
 Date:		Nov 2010
 Contact:	Kay Sievers <kay.sievers@vrfy.org>
 Description:
@@ -18,7 +18,7 @@ Description:
 		 The file supports poll() to detect virtual
 		 console switches.
 
-What:		/sys/class/tty/ttyS0/uartclk
+What:		/sys/class/tty/ttyS<x>/uartclk
 Date:		Sep 2012
 Contact:	Tomas Hlavacek <tmshlvck@gmail.com>
 Description:
@@ -29,7 +29,7 @@ Description:
 		 These sysfs values expose the TIOCGSERIAL interface via
 		 sysfs rather than via ioctls.
 
-What:		/sys/class/tty/ttyS0/type
+What:		/sys/class/tty/ttyS<x>/type
 Date:		October 2012
 Contact:	Alan Cox <alan@linux.intel.com>
 Description:
@@ -38,7 +38,7 @@ Description:
 		 These sysfs values expose the TIOCGSERIAL interface via
 		 sysfs rather than via ioctls.
 
-What:		/sys/class/tty/ttyS0/line
+What:		/sys/class/tty/ttyS<x>/line
 Date:		October 2012
 Contact:	Alan Cox <alan@linux.intel.com>
 Description:
@@ -47,7 +47,7 @@ Description:
 		 These sysfs values expose the TIOCGSERIAL interface via
 		 sysfs rather than via ioctls.
 
-What:		/sys/class/tty/ttyS0/port
+What:		/sys/class/tty/ttyS<x>/port
 Date:		October 2012
 Contact:	Alan Cox <alan@linux.intel.com>
 Description:
@@ -56,7 +56,7 @@ Description:
 		 These sysfs values expose the TIOCGSERIAL interface via
 		 sysfs rather than via ioctls.
 
-What:		/sys/class/tty/ttyS0/irq
+What:		/sys/class/tty/ttyS<x>/irq
 Date:		October 2012
 Contact:	Alan Cox <alan@linux.intel.com>
 Description:
@@ -65,7 +65,7 @@ Description:
 		 These sysfs values expose the TIOCGSERIAL interface via
 		 sysfs rather than via ioctls.
 
-What:		/sys/class/tty/ttyS0/flags
+What:		/sys/class/tty/ttyS<x>/flags
 Date:		October 2012
 Contact:	Alan Cox <alan@linux.intel.com>
 Description:
@@ -74,7 +74,7 @@ Description:
 		 These sysfs values expose the TIOCGSERIAL interface via
 		 sysfs rather than via ioctls.
 
-What:		/sys/class/tty/ttyS0/xmit_fifo_size
+What:		/sys/class/tty/ttyS<x>/xmit_fifo_size
 Date:		October 2012
 Contact:	Alan Cox <alan@linux.intel.com>
 Description:
@@ -83,7 +83,7 @@ Description:
 		 These sysfs values expose the TIOCGSERIAL interface via
 		 sysfs rather than via ioctls.
 
-What:		/sys/class/tty/ttyS0/close_delay
+What:		/sys/class/tty/ttyS<x>/close_delay
 Date:		October 2012
 Contact:	Alan Cox <alan@linux.intel.com>
 Description:
@@ -92,7 +92,7 @@ Description:
 		 These sysfs values expose the TIOCGSERIAL interface via
 		 sysfs rather than via ioctls.
 
-What:		/sys/class/tty/ttyS0/closing_wait
+What:		/sys/class/tty/ttyS<x>/closing_wait
 Date:		October 2012
 Contact:	Alan Cox <alan@linux.intel.com>
 Description:
@@ -101,7 +101,7 @@ Description:
 		 These sysfs values expose the TIOCGSERIAL interface via
 		 sysfs rather than via ioctls.
 
-What:		/sys/class/tty/ttyS0/custom_divisor
+What:		/sys/class/tty/ttyS<x>/custom_divisor
 Date:		October 2012
 Contact:	Alan Cox <alan@linux.intel.com>
 Description:
@@ -110,7 +110,7 @@ Description:
 		 These sysfs values expose the TIOCGSERIAL interface via
 		 sysfs rather than via ioctls.
 
-What:		/sys/class/tty/ttyS0/io_type
+What:		/sys/class/tty/ttyS<x>/io_type
 Date:		October 2012
 Contact:	Alan Cox <alan@linux.intel.com>
 Description:
@@ -120,7 +120,7 @@ Description:
 		 These sysfs values expose the TIOCGSERIAL interface via
 		 sysfs rather than via ioctls.
 
-What:		/sys/class/tty/ttyS0/iomem_base
+What:		/sys/class/tty/ttyS<x>/iomem_base
 Date:		October 2012
 Contact:	Alan Cox <alan@linux.intel.com>
 Description:
@@ -129,7 +129,7 @@ Description:
 		 These sysfs values expose the TIOCGSERIAL interface via
 		 sysfs rather than via ioctls.
 
-What:		/sys/class/tty/ttyS0/iomem_reg_shift
+What:		/sys/class/tty/ttyS<x>/iomem_reg_shift
 Date:		October 2012
 Contact:	Alan Cox <alan@linux.intel.com>
 Description:
@@ -139,7 +139,7 @@ Description:
 		 These sysfs values expose the TIOCGSERIAL interface via
 		 sysfs rather than via ioctls.
 
-What:		/sys/class/tty/ttyS0/rx_trig_bytes
+What:		/sys/class/tty/ttyS<x>/rx_trig_bytes
 Date:		May 2014
 Contact:	Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
 Description:
@@ -155,7 +155,7 @@ Description:
 		 16550A, which has 1/4/8/14 bytes trigger, the RX trigger is
 		 automatically changed to 4 bytes.
 
-What:		/sys/class/tty/ttyS0/console
+What:		/sys/class/tty/ttyS<x>/console
 Date:		February 2020
 Contact:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 Description:
diff --git a/Documentation/COPYING-logo b/Documentation/COPYING-logo
deleted file mode 100644
index b21c7cf7d9f6..000000000000
--- a/Documentation/COPYING-logo
+++ /dev/null
@@ -1,13 +0,0 @@
-This is the full-colour version of the currently unofficial Linux logo
-("currently unofficial" just means that there has been no paperwork and
-that I have not really announced it yet).  It was created by Larry Ewing,
-and is freely usable as long as you acknowledge Larry as the original
-artist. 
-
-Note that there are black-and-white versions of this available that
-scale down to smaller sizes and are better for letterheads or whatever
-you want to use it for: for the full range of logos take a look at
-Larry's web-page:
-
-	https://www.isc.tamu.edu/~lewing/linux/
-
diff --git a/Documentation/Kconfig b/Documentation/Kconfig
index e549a61f4d96..3a0e7ac0c4e3 100644
--- a/Documentation/Kconfig
+++ b/Documentation/Kconfig
@@ -1,23 +1,28 @@
-config WARN_MISSING_DOCUMENTS
+if COMPILE_TEST
+
+menu "Documentation"
 
+config WARN_MISSING_DOCUMENTS
 	bool "Warn if there's a missing documentation file"
-	depends on COMPILE_TEST
 	help
-	   It is not uncommon that a document gets renamed.
-	   This option makes the Kernel to check for missing dependencies,
-	   warning when something is missing. Works only if the Kernel
-	   is built from a git tree.
+	  It is not uncommon that a document gets renamed.
+	  This option makes the Kernel to check for missing dependencies,
+	  warning when something is missing. Works only if the Kernel
+	  is built from a git tree.
 
-	   If unsure, select 'N'.
+	  If unsure, select 'N'.
 
 config WARN_ABI_ERRORS
 	bool "Warn if there are errors at ABI files"
-	depends on COMPILE_TEST
 	help
-	   The files under Documentation/ABI should follow what's
-	   described at Documentation/ABI/README. Yet, as they're manually
-	   written, it would be possible that some of those files would
-	   have errors that would break them for being parsed by
-	   scripts/get_abi.pl. Add a check to verify them.
+	  The files under Documentation/ABI should follow what's
+	  described at Documentation/ABI/README. Yet, as they're manually
+	  written, it would be possible that some of those files would
+	  have errors that would break them for being parsed by
+	  scripts/get_abi.pl. Add a check to verify them.
+
+	  If unsure, select 'N'.
+
+endmenu
 
-	   If unsure, select 'N'.
+endif
diff --git a/Documentation/Makefile b/Documentation/Makefile
index c3feb657b654..023fa658a0a8 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -19,14 +19,16 @@ endif
 SPHINXBUILD   = sphinx-build
 SPHINXOPTS    =
 SPHINXDIRS    = .
+DOCS_THEME    =
+DOCS_CSS      =
 _SPHINXDIRS   = $(sort $(patsubst $(srctree)/Documentation/%/index.rst,%,$(wildcard $(srctree)/Documentation/*/index.rst)))
 SPHINX_CONF   = conf.py
 PAPER         =
 BUILDDIR      = $(obj)/output
 PDFLATEX      = xelatex
-LATEXOPTS     = -interaction=batchmode
+LATEXOPTS     = -interaction=batchmode -no-shell-escape
 
-ifeq ($(KBUILD_VERBOSE),0)
+ifeq ($(findstring 1, $(KBUILD_VERBOSE)),)
 SPHINXOPTS    += "-q"
 endif
 
@@ -84,12 +86,24 @@ quiet_cmd_sphinx = SPHINX  $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
 	-D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \
 	$(ALLSPHINXOPTS) \
 	$(abspath $(srctree)/$(src)/$5) \
-	$(abspath $(BUILDDIR)/$3/$4)
+	$(abspath $(BUILDDIR)/$3/$4) && \
+	if [ "x$(DOCS_CSS)" != "x" ]; then \
+		cp $(if $(patsubst /%,,$(DOCS_CSS)),$(abspath $(srctree)/$(DOCS_CSS)),$(DOCS_CSS)) $(BUILDDIR)/$3/_static/; \
+	fi
 
 htmldocs:
 	@$(srctree)/scripts/sphinx-pre-install --version-check
 	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
 
+texinfodocs:
+	@$(srctree)/scripts/sphinx-pre-install --version-check
+	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,texinfo,$(var),texinfo,$(var)))
+
+# Note: the 'info' Make target is generated by sphinx itself when
+# running the texinfodocs target define above.
+infodocs: texinfodocs
+	$(MAKE) -C $(BUILDDIR)/texinfo info
+
 linkcheckdocs:
 	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,linkcheck,$(var),,$(var)))
 
@@ -138,6 +152,8 @@ cleandocs:
 dochelp:
 	@echo  ' Linux kernel internal documentation in different formats from ReST:'
 	@echo  '  htmldocs        - HTML'
+	@echo  '  texinfodocs     - Texinfo'
+	@echo  '  infodocs        - Info'
 	@echo  '  latexdocs       - LaTeX'
 	@echo  '  pdfdocs         - PDF'
 	@echo  '  epubdocs        - EPUB'
@@ -154,4 +170,8 @@ dochelp:
 	@echo  '  make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build'
 	@echo  '  configuration. This is e.g. useful to build with nit-picking config.'
 	@echo
+	@echo  '  make DOCS_THEME={sphinx-theme} selects a different Sphinx theme.'
+	@echo
+	@echo  '  make DOCS_CSS={a .css file} adds a DOCS_CSS override file for html/epub output.'
+	@echo
 	@echo  '  Default location for the generated documents is Documentation/output'
diff --git a/Documentation/PCI/endpoint/index.rst b/Documentation/PCI/endpoint/index.rst
index 38ea1f604b6d..4d2333e7ae06 100644
--- a/Documentation/PCI/endpoint/index.rst
+++ b/Documentation/PCI/endpoint/index.rst
@@ -13,6 +13,8 @@ PCI Endpoint Framework
    pci-test-howto
    pci-ntb-function
    pci-ntb-howto
+   pci-vntb-function
+   pci-vntb-howto
 
    function/binding/pci-test
    function/binding/pci-ntb
diff --git a/Documentation/PCI/endpoint/pci-vntb-function.rst b/Documentation/PCI/endpoint/pci-vntb-function.rst
new file mode 100644
index 000000000000..0c51f53ab972
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-vntb-function.rst
@@ -0,0 +1,129 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================
+PCI vNTB Function
+=================
+
+:Author: Frank Li <Frank.Li@nxp.com>
+
+The difference between PCI NTB function and PCI vNTB function is
+
+PCI NTB function need at two endpoint instances and connect HOST1
+and HOST2.
+
+PCI vNTB function only use one host and one endpoint(EP), use NTB
+connect EP and PCI host
+
+.. code-block:: text
+
+
+  +------------+         +---------------------------------------+
+  |            |         |                                       |
+  +------------+         |                        +--------------+
+  | NTB        |         |                        | NTB          |
+  | NetDev     |         |                        | NetDev       |
+  +------------+         |                        +--------------+
+  | NTB        |         |                        | NTB          |
+  | Transfer   |         |                        | Transfer     |
+  +------------+         |                        +--------------+
+  |            |         |                        |              |
+  |  PCI NTB   |         |                        |              |
+  |    EPF     |         |                        |              |
+  |   Driver   |         |                        | PCI Virtual  |
+  |            |         +---------------+        | NTB Driver   |
+  |            |         | PCI EP NTB    |<------>|              |
+  |            |         |  FN Driver    |        |              |
+  +------------+         +---------------+        +--------------+
+  |            |         |               |        |              |
+  |  PCI BUS   | <-----> |  PCI EP BUS   |        |  Virtual PCI |
+  |            |  PCI    |               |        |     BUS      |
+  +------------+         +---------------+--------+--------------+
+      PCI RC                        PCI EP
+
+Constructs used for Implementing vNTB
+=====================================
+
+	1) Config Region
+	2) Self Scratchpad Registers
+	3) Peer Scratchpad Registers
+	4) Doorbell (DB) Registers
+	5) Memory Window (MW)
+
+
+Config Region:
+--------------
+
+It is same as PCI NTB Function driver
+
+Scratchpad Registers:
+---------------------
+
+It is appended after Config region.
+
+.. code-block:: text
+
+
+  +--------------------------------------------------+ Base
+  |                                                  |
+  |                                                  |
+  |                                                  |
+  |          Common Config Register                  |
+  |                                                  |
+  |                                                  |
+  |                                                  |
+  +-----------------------+--------------------------+ Base + span_offset
+  |                       |                          |
+  |    Peer Span Space    |    Span Space            |
+  |                       |                          |
+  |                       |                          |
+  +-----------------------+--------------------------+ Base + span_offset
+  |                       |                          |      + span_count * 4
+  |                       |                          |
+  |     Span Space        |   Peer Span Space        |
+  |                       |                          |
+  +-----------------------+--------------------------+
+        Virtual PCI             Pcie Endpoint
+        NTB Driver               NTB Driver
+
+
+Doorbell Registers:
+-------------------
+
+  Doorbell Registers are used by the hosts to interrupt each other.
+
+Memory Window:
+--------------
+
+  Actual transfer of data between the two hosts will happen using the
+  memory window.
+
+Modeling Constructs:
+====================
+
+32-bit BARs.
+
+======  ===============
+BAR NO  CONSTRUCTS USED
+======  ===============
+BAR0    Config Region
+BAR1    Doorbell
+BAR2    Memory Window 1
+BAR3    Memory Window 2
+BAR4    Memory Window 3
+BAR5    Memory Window 4
+======  ===============
+
+64-bit BARs.
+
+======  ===============================
+BAR NO  CONSTRUCTS USED
+======  ===============================
+BAR0    Config Region + Scratchpad
+BAR1
+BAR2    Doorbell
+BAR3
+BAR4    Memory Window 1
+BAR5
+======  ===============================
+
+
diff --git a/Documentation/PCI/endpoint/pci-vntb-howto.rst b/Documentation/PCI/endpoint/pci-vntb-howto.rst
new file mode 100644
index 000000000000..4ab8e4a26d4b
--- /dev/null
+++ b/Documentation/PCI/endpoint/pci-vntb-howto.rst
@@ -0,0 +1,167 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================================================
+PCI Non-Transparent Bridge (NTB) Endpoint Function (EPF) User Guide
+===================================================================
+
+:Author: Frank Li <Frank.Li@nxp.com>
+
+This document is a guide to help users use pci-epf-vntb function driver
+and ntb_hw_epf host driver for NTB functionality. The list of steps to
+be followed in the host side and EP side is given below. For the hardware
+configuration and internals of NTB using configurable endpoints see
+Documentation/PCI/endpoint/pci-vntb-function.rst
+
+Endpoint Device
+===============
+
+Endpoint Controller Devices
+---------------------------
+
+To find the list of endpoint controller devices in the system::
+
+        # ls /sys/class/pci_epc/
+          5f010000.pcie_ep
+
+If PCI_ENDPOINT_CONFIGFS is enabled::
+
+        # ls /sys/kernel/config/pci_ep/controllers
+          5f010000.pcie_ep
+
+Endpoint Function Drivers
+-------------------------
+
+To find the list of endpoint function drivers in the system::
+
+	# ls /sys/bus/pci-epf/drivers
+	pci_epf_ntb  pci_epf_test  pci_epf_vntb
+
+If PCI_ENDPOINT_CONFIGFS is enabled::
+
+	# ls /sys/kernel/config/pci_ep/functions
+	pci_epf_ntb  pci_epf_test  pci_epf_vntb
+
+
+Creating pci-epf-vntb Device
+----------------------------
+
+PCI endpoint function device can be created using the configfs. To create
+pci-epf-vntb device, the following commands can be used::
+
+	# mount -t configfs none /sys/kernel/config
+	# cd /sys/kernel/config/pci_ep/
+	# mkdir functions/pci_epf_vntb/func1
+
+The "mkdir func1" above creates the pci-epf-ntb function device that will
+be probed by pci_epf_vntb driver.
+
+The PCI endpoint framework populates the directory with the following
+configurable fields::
+
+	# ls functions/pci_epf_ntb/func1
+	baseclass_code    deviceid          msi_interrupts    pci-epf-ntb.0
+	progif_code       secondary         subsys_id         vendorid
+	cache_line_size   interrupt_pin     msix_interrupts   primary
+	revid             subclass_code     subsys_vendor_id
+
+The PCI endpoint function driver populates these entries with default values
+when the device is bound to the driver. The pci-epf-vntb driver populates
+vendorid with 0xffff and interrupt_pin with 0x0001::
+
+	# cat functions/pci_epf_vntb/func1/vendorid
+	0xffff
+	# cat functions/pci_epf_vntb/func1/interrupt_pin
+	0x0001
+
+
+Configuring pci-epf-vntb Device
+-------------------------------
+
+The user can configure the pci-epf-vntb device using its configfs entry. In order
+to change the vendorid and the deviceid, the following
+commands can be used::
+
+	# echo 0x1957 > functions/pci_epf_vntb/func1/vendorid
+	# echo 0x0809 > functions/pci_epf_vntb/func1/deviceid
+
+In order to configure NTB specific attributes, a new sub-directory to func1
+should be created::
+
+	# mkdir functions/pci_epf_vntb/func1/pci_epf_vntb.0/
+
+The NTB function driver will populate this directory with various attributes
+that can be configured by the user::
+
+	# ls functions/pci_epf_vntb/func1/pci_epf_vntb.0/
+	db_count    mw1         mw2         mw3         mw4         num_mws
+	spad_count
+
+A sample configuration for NTB function is given below::
+
+	# echo 4 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/db_count
+	# echo 128 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/spad_count
+	# echo 1 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/num_mws
+	# echo 0x100000 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/mw1
+
+A sample configuration for virtual NTB driver for virutal PCI bus::
+
+	# echo 0x1957 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_vid
+	# echo 0x080A > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_pid
+	# echo 0x10 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vbus_number
+
+Binding pci-epf-ntb Device to EP Controller
+--------------------------------------------
+
+NTB function device should be attached to PCI endpoint controllers
+connected to the host.
+
+	# ln -s controllers/5f010000.pcie_ep functions/pci-epf-ntb/func1/primary
+
+Once the above step is completed, the PCI endpoint controllers are ready to
+establish a link with the host.
+
+
+Start the Link
+--------------
+
+In order for the endpoint device to establish a link with the host, the _start_
+field should be populated with '1'. For NTB, both the PCI endpoint controllers
+should establish link with the host (imx8 don't need this steps)::
+
+	# echo 1 > controllers/5f010000.pcie_ep/start
+
+RootComplex Device
+==================
+
+lspci Output at Host side
+-------------------------
+
+Note that the devices listed here correspond to the values populated in
+"Creating pci-epf-ntb Device" section above::
+
+	# lspci
+        00:00.0 PCI bridge: Freescale Semiconductor Inc Device 0000 (rev 01)
+        01:00.0 RAM memory: Freescale Semiconductor Inc Device 0809
+
+Endpoint Device / Virtual PCI bus
+=================================
+
+lspci Output at EP Side / Virtual PCI bus
+-----------------------------------------
+
+Note that the devices listed here correspond to the values populated in
+"Creating pci-epf-ntb Device" section above::
+
+        # lspci
+        10:00.0 Unassigned class [ffff]: Dawicontrol Computersysteme GmbH Device 1234 (rev ff)
+
+Using ntb_hw_epf Device
+-----------------------
+
+The host side software follows the standard NTB software architecture in Linux.
+All the existing client side NTB utilities like NTB Transport Client and NTB
+Netdev, NTB Ping Pong Test Client and NTB Tool Test Client can be used with NTB
+function device.
+
+For more information on NTB see
+:doc:`Non-Transparent Bridge <../../driver-api/ntb>`
diff --git a/Documentation/PCI/index.rst b/Documentation/PCI/index.rst
index c17c87af1968..e73f84aebde3 100644
--- a/Documentation/PCI/index.rst
+++ b/Documentation/PCI/index.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-=======================
-Linux PCI Bus Subsystem
-=======================
+=================
+PCI Bus Subsystem
+=================
 
 .. toctree::
    :maxdepth: 2
diff --git a/Documentation/PCI/msi-howto.rst b/Documentation/PCI/msi-howto.rst
index aa2046af69f7..8ae461e97c54 100644
--- a/Documentation/PCI/msi-howto.rst
+++ b/Documentation/PCI/msi-howto.rst
@@ -285,3 +285,13 @@ to bridges between the PCI root and the device, MSIs are disabled.
 It is also worth checking the device driver to see whether it supports MSIs.
 For example, it may contain calls to pci_alloc_irq_vectors() with the
 PCI_IRQ_MSI or PCI_IRQ_MSIX flags.
+
+
+List of device drivers MSI(-X) APIs
+===================================
+
+The PCI/MSI subystem has a dedicated C file for its exported device driver
+APIs — `drivers/pci/msi/api.c`. The following functions are exported:
+
+.. kernel-doc:: drivers/pci/msi/api.c
+   :export:
diff --git a/Documentation/PCI/pci-error-recovery.rst b/Documentation/PCI/pci-error-recovery.rst
index 187f43a03200..9981d330da8f 100644
--- a/Documentation/PCI/pci-error-recovery.rst
+++ b/Documentation/PCI/pci-error-recovery.rst
@@ -83,6 +83,7 @@ This structure has the form::
 		int (*mmio_enabled)(struct pci_dev *dev);
 		int (*slot_reset)(struct pci_dev *dev);
 		void (*resume)(struct pci_dev *dev);
+		void (*cor_error_detected)(struct pci_dev *dev);
 	};
 
 The possible channel states are::
@@ -417,10 +418,15 @@ That is, the recovery API only requires that:
    - drivers/next/e100.c
    - drivers/net/e1000
    - drivers/net/e1000e
-   - drivers/net/ixgb
    - drivers/net/ixgbe
    - drivers/net/cxgb3
    - drivers/net/s2io.c
 
+   The cor_error_detected() callback is invoked in handle_error_source() when
+   the error severity is "correctable". The callback is optional and allows
+   additional logging to be done if desired. See example:
+
+   - drivers/cxl/pci.c
+
 The End
 -------
diff --git a/Documentation/PCI/pci-iov-howto.rst b/Documentation/PCI/pci-iov-howto.rst
index b9fd003206f1..27d35933cea2 100644
--- a/Documentation/PCI/pci-iov-howto.rst
+++ b/Documentation/PCI/pci-iov-howto.rst
@@ -125,14 +125,14 @@ Following piece of code illustrates the usage of the SR-IOV API.
 		...
 	}
 
-	static int dev_suspend(struct pci_dev *dev, pm_message_t state)
+	static int dev_suspend(struct device *dev)
 	{
 		...
 
 		return 0;
 	}
 
-	static int dev_resume(struct pci_dev *dev)
+	static int dev_resume(struct device *dev)
 	{
 		...
 
@@ -165,8 +165,7 @@ Following piece of code illustrates the usage of the SR-IOV API.
 		.id_table =	dev_id_table,
 		.probe =	dev_probe,
 		.remove =	dev_remove,
-		.suspend =	dev_suspend,
-		.resume =	dev_resume,
+		.driver.pm =	&dev_pm_ops,
 		.shutdown =	dev_shutdown,
 		.sriov_configure = dev_sriov_configure,
 	};
diff --git a/Documentation/PCI/pci.rst b/Documentation/PCI/pci.rst
index 87c6f4a6ca32..cced568d78e9 100644
--- a/Documentation/PCI/pci.rst
+++ b/Documentation/PCI/pci.rst
@@ -273,25 +273,25 @@ Set the DMA mask size
 While all drivers should explicitly indicate the DMA capability
 (e.g. 32 or 64 bit) of the PCI bus master, devices with more than
 32-bit bus master capability for streaming data need the driver
-to "register" this capability by calling pci_set_dma_mask() with
+to "register" this capability by calling dma_set_mask() with
 appropriate parameters.  In general this allows more efficient DMA
 on systems where System RAM exists above 4G _physical_ address.
 
 Drivers for all PCI-X and PCIe compliant devices must call
-pci_set_dma_mask() as they are 64-bit DMA devices.
+dma_set_mask() as they are 64-bit DMA devices.
 
 Similarly, drivers must also "register" this capability if the device
-can directly address "consistent memory" in System RAM above 4G physical
-address by calling pci_set_consistent_dma_mask().
+can directly address "coherent memory" in System RAM above 4G physical
+address by calling dma_set_coherent_mask().
 Again, this includes drivers for all PCI-X and PCIe compliant devices.
 Many 64-bit "PCI" devices (before PCI-X) and some PCI-X devices are
 64-bit DMA capable for payload ("streaming") data but not control
-("consistent") data.
+("coherent") data.
 
 
 Setup shared control data
 -------------------------
-Once the DMA masks are set, the driver can allocate "consistent" (a.k.a. shared)
+Once the DMA masks are set, the driver can allocate "coherent" (a.k.a. shared)
 memory.  See Documentation/core-api/dma-api.rst for a full description of
 the DMA APIs. This section is just a reminder that it needs to be done
 before enabling DMA on the device.
@@ -367,7 +367,7 @@ steps need to be performed:
   - Disable the device from generating IRQs
   - Release the IRQ (free_irq())
   - Stop all DMA activity
-  - Release DMA buffers (both streaming and consistent)
+  - Release DMA buffers (both streaming and coherent)
   - Unregister from other subsystems (e.g. scsi or netdev)
   - Disable device from responding to MMIO/IO Port addresses
   - Release MMIO/IO Port resource(s)
@@ -420,7 +420,7 @@ Once DMA is stopped, clean up streaming DMA first.
 I.e. unmap data buffers and return buffers to "upstream"
 owners if there is one.
 
-Then clean up "consistent" buffers which contain the control data.
+Then clean up "coherent" buffers which contain the control data.
 
 See Documentation/core-api/dma-api.rst for details on unmapping interfaces.
 
diff --git a/Documentation/PCI/sysfs-pci.rst b/Documentation/PCI/sysfs-pci.rst
index 742fbd21dc1f..f495185aa88a 100644
--- a/Documentation/PCI/sysfs-pci.rst
+++ b/Documentation/PCI/sysfs-pci.rst
@@ -125,7 +125,7 @@ implementation of that functionality. To support the historical interface of
 mmap() through files in /proc/bus/pci, platforms may also set HAVE_PCI_MMAP.
 
 Alternatively, platforms which set HAVE_PCI_MMAP may provide their own
-implementation of pci_mmap_page_range() instead of defining
+implementation of pci_mmap_resource_range() instead of defining
 ARCH_GENERIC_PCI_MMAP_RESOURCE.
 
 Platforms which support write-combining maps of PCI resources must define
diff --git a/Documentation/RCU/Design/Data-Structures/Data-Structures.rst b/Documentation/RCU/Design/Data-Structures/Data-Structures.rst
index f4efd6897b09..b34990c7c377 100644
--- a/Documentation/RCU/Design/Data-Structures/Data-Structures.rst
+++ b/Documentation/RCU/Design/Data-Structures/Data-Structures.rst
@@ -973,7 +973,7 @@ The ``->dynticks`` field counts the corresponding CPU's transitions to
 and from either dyntick-idle or user mode, so that this counter has an
 even value when the CPU is in dyntick-idle mode or user mode and an odd
 value otherwise. The transitions to/from user mode need to be counted
-for user mode adaptive-ticks support (see timers/NO_HZ.txt).
+for user mode adaptive-ticks support (see Documentation/timers/no_hz.rst).
 
 The ``->rcu_need_heavy_qs`` field is used to record the fact that the
 RCU core code would really like to see a quiescent state from the
diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst
index 6f89cf1e567d..93d899d53258 100644
--- a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst
+++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst
@@ -277,7 +277,7 @@ the following access functions:
 
 Again, only one request in a given batch need actually carry out a
 grace-period operation, which means there must be an efficient way to
-identify which of many concurrent reqeusts will initiate the grace
+identify which of many concurrent requests will initiate the grace
 period, and that there be an efficient way for the remaining requests to
 wait for that grace period to complete. However, that is the topic of
 the next section.
@@ -405,8 +405,8 @@ Use of Workqueues
 In earlier implementations, the task requesting the expedited grace
 period also drove it to completion. This straightforward approach had
 the disadvantage of needing to account for POSIX signals sent to user
-tasks, so more recent implemementations use the Linux kernel's
-`workqueues <https://www.kernel.org/doc/Documentation/core-api/workqueue.rst>`__.
+tasks, so more recent implementations use the Linux kernel's
+workqueues (see Documentation/core-api/workqueue.rst).
 
 The requesting task still does counter snapshotting and funnel-lock
 processing, but the task reaching the top of the funnel lock does a
@@ -465,7 +465,7 @@ corresponding disadvantage that workqueues cannot be used until they are
 initialized, which does not happen until some time after the scheduler
 spawns the first task. Given that there are parts of the kernel that
 really do want to execute grace periods during this mid-boot “dead
-zone”, expedited grace periods must do something else during thie time.
+zone”, expedited grace periods must do something else during this time.
 
 What they do is to fall back to the old practice of requiring that the
 requesting task drive the expedited grace period, as was the case before
diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel0.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel0.svg
index 98af66557908..16b1ff0ad38c 100644
--- a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel0.svg
+++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel0.svg
@@ -116,7 +116,7 @@
     <flowRoot
        xml:space="preserve"
        id="flowRoot2985"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"><flowRegion
          id="flowRegion2987"><rect
            id="rect2989"
            width="82.85714"
@@ -125,7 +125,7 @@
            y="492.36218" /></flowRegion><flowPara
          id="flowPara2991" /></flowRoot>    <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="362.371"
        y="262.51819"
        id="text4441"
diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel1.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel1.svg
index e0184a37aec7..684a4b969725 100644
--- a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel1.svg
+++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel1.svg
@@ -116,7 +116,7 @@
     <flowRoot
        xml:space="preserve"
        id="flowRoot2985"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"><flowRegion
          id="flowRegion2987"><rect
            id="rect2989"
            width="82.85714"
@@ -125,7 +125,7 @@
            y="492.36218" /></flowRegion><flowPara
          id="flowPara2991" /></flowRoot>    <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="362.371"
        y="262.51819"
        id="text4441"
diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel2.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel2.svg
index 1bc3fed54d58..8fb2454d9544 100644
--- a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel2.svg
+++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel2.svg
@@ -116,7 +116,7 @@
     <flowRoot
        xml:space="preserve"
        id="flowRoot2985"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"><flowRegion
          id="flowRegion2987"><rect
            id="rect2989"
            width="82.85714"
@@ -125,7 +125,7 @@
            y="492.36218" /></flowRegion><flowPara
          id="flowPara2991" /></flowRoot>    <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="362.371"
        y="262.51819"
        id="text4441"
diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel3.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel3.svg
index 6d8a1bffb3e4..5d4f22d5662c 100644
--- a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel3.svg
+++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel3.svg
@@ -116,7 +116,7 @@
     <flowRoot
        xml:space="preserve"
        id="flowRoot2985"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"><flowRegion
          id="flowRegion2987"><rect
            id="rect2989"
            width="82.85714"
@@ -125,7 +125,7 @@
            y="492.36218" /></flowRegion><flowPara
          id="flowPara2991" /></flowRoot>    <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="362.371"
        y="262.51819"
        id="text4441"
diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel4.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel4.svg
index 44018fd6342b..b89b02869914 100644
--- a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel4.svg
+++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel4.svg
@@ -116,7 +116,7 @@
     <flowRoot
        xml:space="preserve"
        id="flowRoot2985"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"><flowRegion
          id="flowRegion2987"><rect
            id="rect2989"
            width="82.85714"
@@ -125,7 +125,7 @@
            y="492.36218" /></flowRegion><flowPara
          id="flowPara2991" /></flowRoot>    <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="362.371"
        y="262.51819"
        id="text4441"
diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel5.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel5.svg
index e5eef50454fb..90f1c77bea2f 100644
--- a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel5.svg
+++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel5.svg
@@ -116,7 +116,7 @@
     <flowRoot
        xml:space="preserve"
        id="flowRoot2985"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"><flowRegion
          id="flowRegion2987"><rect
            id="rect2989"
            width="82.85714"
@@ -125,7 +125,7 @@
            y="492.36218" /></flowRegion><flowPara
          id="flowPara2991" /></flowRoot>    <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="362.371"
        y="262.51819"
        id="text4441"
diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel6.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel6.svg
index fbd2c1892886..3e5651da031a 100644
--- a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel6.svg
+++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel6.svg
@@ -116,7 +116,7 @@
     <flowRoot
        xml:space="preserve"
        id="flowRoot2985"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"><flowRegion
          id="flowRegion2987"><rect
            id="rect2989"
            width="82.85714"
@@ -125,7 +125,7 @@
            y="492.36218" /></flowRegion><flowPara
          id="flowPara2991" /></flowRoot>    <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="362.371"
        y="262.51819"
        id="text4441"
diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel7.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel7.svg
index 502e159ed278..9483f08d345e 100644
--- a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel7.svg
+++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel7.svg
@@ -116,7 +116,7 @@
     <flowRoot
        xml:space="preserve"
        id="flowRoot2985"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"><flowRegion
          id="flowRegion2987"><rect
            id="rect2989"
            width="82.85714"
@@ -125,7 +125,7 @@
            y="492.36218" /></flowRegion><flowPara
          id="flowPara2991" /></flowRoot>    <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="362.371"
        y="262.51819"
        id="text4441"
diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel8.svg b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel8.svg
index 677401551c7d..1101ec30e604 100644
--- a/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel8.svg
+++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Funnel8.svg
@@ -116,7 +116,7 @@
     <flowRoot
        xml:space="preserve"
        id="flowRoot2985"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"><flowRegion
          id="flowRegion2987"><rect
            id="rect2989"
            width="82.85714"
@@ -125,7 +125,7 @@
            y="492.36218" /></flowRegion><flowPara
          id="flowPara2991" /></flowRoot>    <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="362.371"
        y="262.51819"
        id="text4441"
diff --git a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst
index eeb351296df1..5750f125361b 100644
--- a/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst
+++ b/Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst
@@ -168,7 +168,7 @@ an ``atomic_add_return()`` of zero) to detect idle CPUs.
 +-----------------------------------------------------------------------+
 
 The approach must be extended to handle one final case, that of waking a
-task blocked in ``synchronize_rcu()``. This task might be affinitied to
+task blocked in ``synchronize_rcu()``. This task might be affined to
 a CPU that is not yet aware that the grace period has ended, and thus
 might not yet be subject to the grace period's memory ordering.
 Therefore, there is an ``smp_mb()`` after the return from
@@ -202,49 +202,44 @@ newly arrived RCU callbacks against future grace periods:
     1 static void rcu_prepare_for_idle(void)
     2 {
     3   bool needwake;
-    4   struct rcu_data *rdp;
-    5   struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
-    6   struct rcu_node *rnp;
-    7   struct rcu_state *rsp;
-    8   int tne;
-    9
-   10   if (IS_ENABLED(CONFIG_RCU_NOCB_CPU_ALL) ||
-   11       rcu_is_nocb_cpu(smp_processor_id()))
-   12     return;
+    4   struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
+    5   struct rcu_node *rnp;
+    6   int tne;
+    7
+    8   lockdep_assert_irqs_disabled();
+    9   if (rcu_rdp_is_offloaded(rdp))
+   10     return;
+   11
+   12   /* Handle nohz enablement switches conservatively. */
    13   tne = READ_ONCE(tick_nohz_active);
-   14   if (tne != rdtp->tick_nohz_enabled_snap) {
-   15     if (rcu_cpu_has_callbacks(NULL))
-   16       invoke_rcu_core();
-   17     rdtp->tick_nohz_enabled_snap = tne;
+   14   if (tne != rdp->tick_nohz_enabled_snap) {
+   15     if (!rcu_segcblist_empty(&rdp->cblist))
+   16       invoke_rcu_core(); /* force nohz to see update. */
+   17     rdp->tick_nohz_enabled_snap = tne;
    18     return;
-   19   }
+   19	}
    20   if (!tne)
    21     return;
-   22   if (rdtp->all_lazy &&
-   23       rdtp->nonlazy_posted != rdtp->nonlazy_posted_snap) {
-   24     rdtp->all_lazy = false;
-   25     rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted;
-   26     invoke_rcu_core();
-   27     return;
-   28   }
-   29   if (rdtp->last_accelerate == jiffies)
-   30     return;
-   31   rdtp->last_accelerate = jiffies;
-   32   for_each_rcu_flavor(rsp) {
-   33     rdp = this_cpu_ptr(rsp->rda);
-   34     if (rcu_segcblist_pend_cbs(&rdp->cblist))
-   35       continue;
-   36     rnp = rdp->mynode;
-   37     raw_spin_lock_rcu_node(rnp);
-   38     needwake = rcu_accelerate_cbs(rsp, rnp, rdp);
-   39     raw_spin_unlock_rcu_node(rnp);
-   40     if (needwake)
-   41       rcu_gp_kthread_wake(rsp);
-   42   }
-   43 }
+   22
+   23   /*
+   24    * If we have not yet accelerated this jiffy, accelerate all
+   25    * callbacks on this CPU.
+   26   */
+   27   if (rdp->last_accelerate == jiffies)
+   28     return;
+   29   rdp->last_accelerate = jiffies;
+   30   if (rcu_segcblist_pend_cbs(&rdp->cblist)) {
+   31     rnp = rdp->mynode;
+   32     raw_spin_lock_rcu_node(rnp); /* irqs already disabled. */
+   33     needwake = rcu_accelerate_cbs(rnp, rdp);
+   34     raw_spin_unlock_rcu_node(rnp); /* irqs remain disabled. */
+   35     if (needwake)
+   36       rcu_gp_kthread_wake();
+   37   }
+   38 }
 
 But the only part of ``rcu_prepare_for_idle()`` that really matters for
-this discussion are lines 37–39. We will therefore abbreviate this
+this discussion are lines 32–34. We will therefore abbreviate this
 function as follows:
 
 .. kernel-figure:: rcu_node-lock.svg
diff --git a/Documentation/RCU/Design/Requirements/GPpartitionReaders1.svg b/Documentation/RCU/Design/Requirements/GPpartitionReaders1.svg
index 4b4014fda770..87851a8fac1e 100644
--- a/Documentation/RCU/Design/Requirements/GPpartitionReaders1.svg
+++ b/Documentation/RCU/Design/Requirements/GPpartitionReaders1.svg
@@ -88,7 +88,7 @@
     <flowRoot
        xml:space="preserve"
        id="flowRoot2985"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"><flowRegion
          id="flowRegion2987"><rect
            id="rect2989"
            width="82.85714"
@@ -103,7 +103,7 @@
          id="text2993"
          y="-261.66608"
          x="412.12299"
-         style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+         style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
          xml:space="preserve"
          transform="matrix(0,1,-1,0,0,0)"><tspan
            y="-261.66608"
@@ -135,7 +135,7 @@
     </g>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="112.04738"
        y="268.18076"
        id="text4429"
@@ -146,7 +146,7 @@
          y="268.18076">WRITE_ONCE(a, 1);</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="112.04738"
        y="439.13766"
        id="text4441"
@@ -157,7 +157,7 @@
          y="439.13766">WRITE_ONCE(b, 1);</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="255.60869"
        y="309.29346"
        id="text4445"
@@ -168,7 +168,7 @@
          y="309.29346">r1 = READ_ONCE(a);</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="255.14423"
        y="520.61786"
        id="text4449"
@@ -179,7 +179,7 @@
          y="520.61786">WRITE_ONCE(c, 1);</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="396.10254"
        y="384.71124"
        id="text4453"
@@ -190,7 +190,7 @@
          y="384.71124">r2 = READ_ONCE(b);</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="396.10254"
        y="582.13617"
        id="text4457"
@@ -201,7 +201,7 @@
          y="582.13617">r3 = READ_ONCE(c);</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="112.08231"
        y="213.91006"
        id="text4461"
@@ -212,7 +212,7 @@
          y="213.91006">thread0()</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="252.34512"
        y="213.91006"
        id="text4461-6"
@@ -223,7 +223,7 @@
          y="213.91006">thread1()</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="396.42557"
        y="213.91006"
        id="text4461-2"
@@ -251,7 +251,7 @@
        inkscape:connector-curvature="0" />
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="111.75929"
        y="251.53981"
        id="text4429-8"
@@ -262,7 +262,7 @@
          y="251.53981">rcu_read_lock();</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="396.10254"
        y="367.91556"
        id="text4429-8-9"
@@ -273,7 +273,7 @@
          y="367.91556">rcu_read_lock();</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="396.10254"
        y="597.40289"
        id="text4429-8-9-3"
@@ -284,7 +284,7 @@
          y="597.40289">rcu_read_unlock();</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="111.75929"
        y="453.15311"
        id="text4429-8-9-3-1"
@@ -300,7 +300,7 @@
        inkscape:connector-curvature="0" />
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="394.94427"
        y="345.66351"
        id="text4648"
@@ -324,7 +324,7 @@
        sodipodi:open="true" />
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="112.11968"
        y="475.77856"
        id="text4648-4"
@@ -361,7 +361,7 @@
        sodipodi:open="true" />
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="254.85066"
        y="348.96619"
        id="text4648-4-3"
diff --git a/Documentation/RCU/Design/Requirements/ReadersPartitionGP1.svg b/Documentation/RCU/Design/Requirements/ReadersPartitionGP1.svg
index 48cd1623d4d4..e2a8af592bab 100644
--- a/Documentation/RCU/Design/Requirements/ReadersPartitionGP1.svg
+++ b/Documentation/RCU/Design/Requirements/ReadersPartitionGP1.svg
@@ -116,7 +116,7 @@
     <flowRoot
        xml:space="preserve"
        id="flowRoot2985"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"><flowRegion
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"><flowRegion
          id="flowRegion2987"><rect
            id="rect2989"
            width="82.85714"
@@ -131,7 +131,7 @@
          id="text2993"
          y="-261.66608"
          x="436.12299"
-         style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+         style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
          xml:space="preserve"
          transform="matrix(0,1,-1,0,0,0)"><tspan
            y="-261.66608"
@@ -163,7 +163,7 @@
     </g>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="112.04738"
        y="268.18076"
        id="text4429"
@@ -174,7 +174,7 @@
          y="268.18076">WRITE_ONCE(a, 1);</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="112.04738"
        y="487.13766"
        id="text4441"
@@ -185,7 +185,7 @@
          y="487.13766">WRITE_ONCE(b, 1);</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="255.60869"
        y="297.29346"
        id="text4445"
@@ -196,7 +196,7 @@
          y="297.29346">r1 = READ_ONCE(a);</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="255.14423"
        y="554.61786"
        id="text4449"
@@ -207,7 +207,7 @@
          y="554.61786">WRITE_ONCE(c, 1);</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="396.10254"
        y="370.71124"
        id="text4453"
@@ -218,7 +218,7 @@
          y="370.71124">WRITE_ONCE(d, 1);</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="396.10254"
        y="572.13617"
        id="text4457"
@@ -229,7 +229,7 @@
          y="572.13617">r2 = READ_ONCE(c);</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="112.08231"
        y="213.91006"
        id="text4461"
@@ -240,7 +240,7 @@
          y="213.91006">thread0()</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="252.34512"
        y="213.91006"
        id="text4461-6"
@@ -251,7 +251,7 @@
          y="213.91006">thread1()</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="396.42557"
        y="213.91006"
        id="text4461-2"
@@ -281,7 +281,7 @@
        sodipodi:nodetypes="cc" />
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="111.75929"
        y="251.53981"
        id="text4429-8"
@@ -292,7 +292,7 @@
          y="251.53981">rcu_read_lock();</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="396.10254"
        y="353.91556"
        id="text4429-8-9"
@@ -303,7 +303,7 @@
          y="353.91556">rcu_read_lock();</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="396.10254"
        y="587.40289"
        id="text4429-8-9-3"
@@ -314,7 +314,7 @@
          y="587.40289">rcu_read_unlock();</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="111.75929"
        y="501.15311"
        id="text4429-8-9-3-1"
@@ -331,7 +331,7 @@
        sodipodi:nodetypes="cc" />
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="394.94427"
        y="331.66351"
        id="text4648"
@@ -355,7 +355,7 @@
        sodipodi:open="true" />
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="112.11968"
        y="523.77856"
        id="text4648-4"
@@ -392,7 +392,7 @@
        sodipodi:open="true" />
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="254.85066"
        y="336.96619"
        id="text4648-4-3"
@@ -421,7 +421,7 @@
          id="text2993-7"
          y="-261.66608"
          x="440.12299"
-         style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+         style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
          xml:space="preserve"
          transform="matrix(0,1,-1,0,0,0)"><tspan
            y="-261.66608"
@@ -453,7 +453,7 @@
     </g>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="541.70508"
        y="387.6217"
        id="text4445-0"
@@ -464,7 +464,7 @@
          y="387.6217">r3 = READ_ONCE(d);</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="541.2406"
        y="646.94611"
        id="text4449-6"
@@ -488,7 +488,7 @@
        sodipodi:open="true" />
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="540.94702"
        y="427.29443"
        id="text4648-4-3-1"
@@ -499,7 +499,7 @@
          y="427.29443">QS</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="686.27747"
        y="461.83929"
        id="text4453-7"
@@ -510,7 +510,7 @@
          y="461.83929">r4 = READ_ONCE(b);</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="686.27747"
        y="669.26422"
        id="text4457-9"
@@ -521,7 +521,7 @@
          y="669.26422">r5 = READ_ONCE(e);</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="686.27747"
        y="445.04358"
        id="text4429-8-9-33"
@@ -532,7 +532,7 @@
          y="445.04358">rcu_read_lock();</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="686.27747"
        y="684.53094"
        id="text4429-8-9-3-8"
@@ -543,7 +543,7 @@
          y="684.53094">rcu_read_unlock();</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="685.11914"
        y="422.79153"
        id="text4648-9"
@@ -567,7 +567,7 @@
        sodipodi:open="true" />
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="397.85934"
        y="609.59003"
        id="text4648-5"
@@ -591,7 +591,7 @@
        sodipodi:open="true" />
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="256.75986"
        y="586.99133"
        id="text4648-5-2"
@@ -615,7 +615,7 @@
        sodipodi:open="true" />
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="546.22791"
        y="213.91006"
        id="text4461-2-5"
@@ -626,7 +626,7 @@
          y="213.91006">thread3()</tspan></text>
     <text
        xml:space="preserve"
-       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:Symbol;-inkscape-font-specification:Symbol"
+       style="font-size:10px;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;text-align:center;line-height:125%;letter-spacing:0px;word-spacing:0px;writing-mode:lr-tb;text-anchor:middle;fill:#000000;fill-opacity:1;stroke:none;font-family:monospace;-inkscape-font-specification:monospace"
        x="684.00067"
        y="213.91006"
        id="text4461-2-1"
diff --git a/Documentation/RCU/Design/Requirements/Requirements.rst b/Documentation/RCU/Design/Requirements/Requirements.rst
index 45278e2974c0..49387d823619 100644
--- a/Documentation/RCU/Design/Requirements/Requirements.rst
+++ b/Documentation/RCU/Design/Requirements/Requirements.rst
@@ -370,8 +370,8 @@ pointer fetched by rcu_dereference() may not be used outside of the
 outermost RCU read-side critical section containing that
 rcu_dereference(), unless protection of the corresponding data
 element has been passed from RCU to some other synchronization
-mechanism, most commonly locking or `reference
-counting <https://www.kernel.org/doc/Documentation/RCU/rcuref.txt>`__.
+mechanism, most commonly locking or reference counting
+(see ../../rcuref.rst).
 
 .. |high-quality implementation of C11 memory_order_consume [PDF]| replace:: high-quality implementation of C11 ``memory_order_consume`` [PDF]
 .. _high-quality implementation of C11 memory_order_consume [PDF]: http://www.rdrop.com/users/paulmck/RCU/consume.2015.07.13a.pdf
@@ -1844,10 +1844,10 @@ that meets this requirement.
 
 Furthermore, NMI handlers can be interrupted by what appear to RCU to be
 normal interrupts. One way that this can happen is for code that
-directly invokes rcu_irq_enter() and rcu_irq_exit() to be called
+directly invokes ct_irq_enter() and ct_irq_exit() to be called
 from an NMI handler. This astonishing fact of life prompted the current
-code structure, which has rcu_irq_enter() invoking
-rcu_nmi_enter() and rcu_irq_exit() invoking rcu_nmi_exit().
+code structure, which has ct_irq_enter() invoking
+ct_nmi_enter() and ct_irq_exit() invoking ct_nmi_exit().
 And yes, I also learned of this requirement the hard way.
 
 Loadable Modules
@@ -1858,7 +1858,7 @@ unloaded. After a given module has been unloaded, any attempt to call
 one of its functions results in a segmentation fault. The module-unload
 functions must therefore cancel any delayed calls to loadable-module
 functions, for example, any outstanding mod_timer() must be dealt
-with via del_timer_sync() or similar.
+with via timer_shutdown_sync() or similar.
 
 Unfortunately, there is no way to cancel an RCU callback; once you
 invoke call_rcu(), the callback function is eventually going to be
@@ -2195,7 +2195,7 @@ scheduling-clock interrupt be enabled when RCU needs it to be:
    sections, and RCU believes this CPU to be idle, no problem. This
    sort of thing is used by some architectures for light-weight
    exception handlers, which can then avoid the overhead of
-   rcu_irq_enter() and rcu_irq_exit() at exception entry and
+   ct_irq_enter() and ct_irq_exit() at exception entry and
    exit, respectively. Some go further and avoid the entireties of
    irq_enter() and irq_exit().
    Just make very sure you are running some of your tests with
@@ -2226,7 +2226,7 @@ scheduling-clock interrupt be enabled when RCU needs it to be:
 +-----------------------------------------------------------------------+
 | **Answer**:                                                           |
 +-----------------------------------------------------------------------+
-| One approach is to do ``rcu_irq_exit();rcu_irq_enter();`` every so    |
+| One approach is to do ``ct_irq_exit();ct_irq_enter();`` every so      |
 | often. But given that long-running interrupt handlers can cause other |
 | problems, not least for response time, shouldn't you work to keep     |
 | your interrupt handler's runtime within reasonable bounds?            |
@@ -2654,6 +2654,38 @@ synchronize_rcu(), and rcu_barrier(), respectively. In
 three APIs are therefore implemented by separate functions that check
 for voluntary context switches.
 
+Tasks Rude RCU
+~~~~~~~~~~~~~~
+
+Some forms of tracing need to wait for all preemption-disabled regions
+of code running on any online CPU, including those executed when RCU is
+not watching.  This means that synchronize_rcu() is insufficient, and
+Tasks Rude RCU must be used instead.  This flavor of RCU does its work by
+forcing a workqueue to be scheduled on each online CPU, hence the "Rude"
+moniker.  And this operation is considered to be quite rude by real-time
+workloads that don't want their ``nohz_full`` CPUs receiving IPIs and
+by battery-powered systems that don't want their idle CPUs to be awakened.
+
+The tasks-rude-RCU API is also reader-marking-free and thus quite compact,
+consisting of call_rcu_tasks_rude(), synchronize_rcu_tasks_rude(),
+and rcu_barrier_tasks_rude().
+
+Tasks Trace RCU
+~~~~~~~~~~~~~~~
+
+Some forms of tracing need to sleep in readers, but cannot tolerate
+SRCU's read-side overhead, which includes a full memory barrier in both
+srcu_read_lock() and srcu_read_unlock().  This need is handled by a
+Tasks Trace RCU that uses scheduler locking and IPIs to synchronize with
+readers.  Real-time systems that cannot tolerate IPIs may build their
+kernels with ``CONFIG_TASKS_TRACE_RCU_READ_MB=y``, which avoids the IPIs at
+the expense of adding full memory barriers to the read-side primitives.
+
+The tasks-trace-RCU API is also reasonably compact,
+consisting of rcu_read_lock_trace(), rcu_read_unlock_trace(),
+rcu_read_lock_trace_held(), call_rcu_tasks_trace(),
+synchronize_rcu_tasks_trace(), and rcu_barrier_tasks_trace().
+
 Possible Future Changes
 -----------------------
 
diff --git a/Documentation/RCU/NMI-RCU.rst b/Documentation/RCU/NMI-RCU.rst
index 2a92bc685ef1..dff60a80b386 100644
--- a/Documentation/RCU/NMI-RCU.rst
+++ b/Documentation/RCU/NMI-RCU.rst
@@ -8,7 +8,7 @@ Although RCU is usually used to protect read-mostly data structures,
 it is possible to use RCU to provide dynamic non-maskable interrupt
 handlers, as well as dynamic irq handlers.  This document describes
 how to do this, drawing loosely from Zwane Mwaikambo's NMI-timer
-work in "arch/x86/kernel/traps.c".
+work in an old version of "arch/x86/kernel/traps.c".
 
 The relevant pieces of code are listed below, each followed by a
 brief explanation::
@@ -116,7 +116,7 @@ Answer to Quick Quiz:
 
 	This same sad story can happen on other CPUs when using
 	a compiler with aggressive pointer-value speculation
-	optimizations.
+	optimizations.  (But please don't!)
 
 	More important, the rcu_dereference_sched() makes it
 	clear to someone reading the code that the pointer is
diff --git a/Documentation/RCU/RTFP.txt b/Documentation/RCU/RTFP.txt
index 588d97366a46..db8f16b392aa 100644
--- a/Documentation/RCU/RTFP.txt
+++ b/Documentation/RCU/RTFP.txt
@@ -201,7 +201,7 @@ work looked at debugging uses of RCU [Seyster:2011:RFA:2075416.2075425].
 In 2012, Josh Triplett received his Ph.D. with his dissertation
 covering RCU-protected resizable hash tables and the relationship
 between memory barriers and read-side traversal order:  If the updater
-is making changes in the opposite direction from the read-side traveral
+is making changes in the opposite direction from the read-side traversal
 order, the updater need only execute a memory-barrier instruction,
 but if in the same direction, the updater needs to wait for a grace
 period between the individual updates [JoshTriplettPhD].  Also in 2012,
@@ -1245,7 +1245,7 @@ Oregon Health and Sciences University"
 [Viewed September 5, 2005]"
 ,annotation={
 	First posting showing how RCU can be safely adapted for
-	preemptable RCU read side critical sections.
+	preemptible RCU read side critical sections.
 }
 }
 
@@ -1888,7 +1888,7 @@ Revised:
 \url{https://lore.kernel.org/r/20070910183004.GA3299@linux.vnet.ibm.com}
 [Viewed October 25, 2007]"
 ,annotation={
-	Final patch for preemptable RCU to -rt.  (Later patches were
+	Final patch for preemptible RCU to -rt.  (Later patches were
 	to mainline, eventually incorporated.)
 }
 }
@@ -2275,7 +2275,7 @@ lot of {Linux} into your technology!!!"
 \url{https://lore.kernel.org/r/20090724001429.GA17374@linux.vnet.ibm.com}
 [Viewed August 15, 2009]"
 ,annotation={
-	First posting of simple and fast preemptable RCU.
+	First posting of simple and fast preemptible RCU.
 }
 }
 
@@ -2639,7 +2639,7 @@ lot of {Linux} into your technology!!!"
 	RCU-protected hash tables, barriers vs. read-side traversal order.
 	.
 	If the updater is making changes in the opposite direction from
-	the read-side traveral order, the updater need only execute a
+	the read-side traversal order, the updater need only execute a
 	memory-barrier instruction, but if in the same direction, the
 	updater needs to wait for a grace period between the individual
 	updates.
diff --git a/Documentation/RCU/UP.rst b/Documentation/RCU/UP.rst
index e26dda27430c..4060d7a2f62a 100644
--- a/Documentation/RCU/UP.rst
+++ b/Documentation/RCU/UP.rst
@@ -38,7 +38,7 @@ by having call_rcu() directly invoke its arguments only if it was called
 from process context.  However, this can fail in a similar manner.
 
 Suppose that an RCU-based algorithm again scans a linked list containing
-elements A, B, and C in process contexts, but that it invokes a function
+elements A, B, and C in process context, but that it invokes a function
 on each element as it is scanned.  Suppose further that this function
 deletes element B from the list, then passes it to call_rcu() for deferred
 freeing.  This may be a bit unconventional, but it is perfectly legal
@@ -59,7 +59,8 @@ Example 3: Death by Deadlock
 Suppose that call_rcu() is invoked while holding a lock, and that the
 callback function must acquire this same lock.  In this case, if
 call_rcu() were to directly invoke the callback, the result would
-be self-deadlock.
+be self-deadlock *even if* this invocation occurred from a later
+call_rcu() invocation a full grace period later.
 
 In some cases, it would possible to restructure to code so that
 the call_rcu() is delayed until after the lock is released.  However,
@@ -85,6 +86,14 @@ Quick Quiz #2:
 
 :ref:`Answers to Quick Quiz <answer_quick_quiz_up>`
 
+It is important to note that userspace RCU implementations *do*
+permit call_rcu() to directly invoke callbacks, but only if a full
+grace period has elapsed since those callbacks were queued.  This is
+the case because some userspace environments are extremely constrained.
+Nevertheless, people writing userspace RCU implementations are strongly
+encouraged to avoid invoking callbacks from call_rcu(), thus obtaining
+the deadlock-avoidance benefits called out above.
+
 Summary
 -------
 
@@ -98,7 +107,7 @@ UP systems, including PREEMPT SMP builds running on UP systems.
 
 Quick Quiz #3:
 	Why can't synchronize_rcu() return immediately on UP systems running
-	preemptable RCU?
+	preemptible RCU?
 
 .. _answer_quick_quiz_up:
 
@@ -134,7 +143,7 @@ Answer to Quick Quiz #2:
 
 Answer to Quick Quiz #3:
 	Why can't synchronize_rcu() return immediately on UP systems
-	running preemptable RCU?
+	running preemptible RCU?
 
 	Because some other task might have been preempted in the middle
 	of an RCU read-side critical section.  If synchronize_rcu()
diff --git a/Documentation/RCU/arrayRCU.rst b/Documentation/RCU/arrayRCU.rst
deleted file mode 100644
index 4051ea3871ef..000000000000
--- a/Documentation/RCU/arrayRCU.rst
+++ /dev/null
@@ -1,165 +0,0 @@
-.. _array_rcu_doc:
-
-Using RCU to Protect Read-Mostly Arrays
-=======================================
-
-Although RCU is more commonly used to protect linked lists, it can
-also be used to protect arrays.  Three situations are as follows:
-
-1.  :ref:`Hash Tables <hash_tables>`
-
-2.  :ref:`Static Arrays <static_arrays>`
-
-3.  :ref:`Resizable Arrays <resizable_arrays>`
-
-Each of these three situations involves an RCU-protected pointer to an
-array that is separately indexed.  It might be tempting to consider use
-of RCU to instead protect the index into an array, however, this use
-case is **not** supported.  The problem with RCU-protected indexes into
-arrays is that compilers can play way too many optimization games with
-integers, which means that the rules governing handling of these indexes
-are far more trouble than they are worth.  If RCU-protected indexes into
-arrays prove to be particularly valuable (which they have not thus far),
-explicit cooperation from the compiler will be required to permit them
-to be safely used.
-
-That aside, each of the three RCU-protected pointer situations are
-described in the following sections.
-
-.. _hash_tables:
-
-Situation 1: Hash Tables
-------------------------
-
-Hash tables are often implemented as an array, where each array entry
-has a linked-list hash chain.  Each hash chain can be protected by RCU
-as described in the listRCU.txt document.  This approach also applies
-to other array-of-list situations, such as radix trees.
-
-.. _static_arrays:
-
-Situation 2: Static Arrays
---------------------------
-
-Static arrays, where the data (rather than a pointer to the data) is
-located in each array element, and where the array is never resized,
-have not been used with RCU.  Rik van Riel recommends using seqlock in
-this situation, which would also have minimal read-side overhead as long
-as updates are rare.
-
-Quick Quiz:
-		Why is it so important that updates be rare when using seqlock?
-
-:ref:`Answer to Quick Quiz <answer_quick_quiz_seqlock>`
-
-.. _resizable_arrays:
-
-Situation 3: Resizable Arrays
-------------------------------
-
-Use of RCU for resizable arrays is demonstrated by the grow_ary()
-function formerly used by the System V IPC code.  The array is used
-to map from semaphore, message-queue, and shared-memory IDs to the data
-structure that represents the corresponding IPC construct.  The grow_ary()
-function does not acquire any locks; instead its caller must hold the
-ids->sem semaphore.
-
-The grow_ary() function, shown below, does some limit checks, allocates a
-new ipc_id_ary, copies the old to the new portion of the new, initializes
-the remainder of the new, updates the ids->entries pointer to point to
-the new array, and invokes ipc_rcu_putref() to free up the old array.
-Note that rcu_assign_pointer() is used to update the ids->entries pointer,
-which includes any memory barriers required on whatever architecture
-you are running on::
-
-	static int grow_ary(struct ipc_ids* ids, int newsize)
-	{
-		struct ipc_id_ary* new;
-		struct ipc_id_ary* old;
-		int i;
-		int size = ids->entries->size;
-
-		if(newsize > IPCMNI)
-			newsize = IPCMNI;
-		if(newsize <= size)
-			return newsize;
-
-		new = ipc_rcu_alloc(sizeof(struct kern_ipc_perm *)*newsize +
-				    sizeof(struct ipc_id_ary));
-		if(new == NULL)
-			return size;
-		new->size = newsize;
-		memcpy(new->p, ids->entries->p,
-		       sizeof(struct kern_ipc_perm *)*size +
-		       sizeof(struct ipc_id_ary));
-		for(i=size;i<newsize;i++) {
-			new->p[i] = NULL;
-		}
-		old = ids->entries;
-
-		/*
-		 * Use rcu_assign_pointer() to make sure the memcpyed
-		 * contents of the new array are visible before the new
-		 * array becomes visible.
-		 */
-		rcu_assign_pointer(ids->entries, new);
-
-		ipc_rcu_putref(old);
-		return newsize;
-	}
-
-The ipc_rcu_putref() function decrements the array's reference count
-and then, if the reference count has dropped to zero, uses call_rcu()
-to free the array after a grace period has elapsed.
-
-The array is traversed by the ipc_lock() function.  This function
-indexes into the array under the protection of rcu_read_lock(),
-using rcu_dereference() to pick up the pointer to the array so
-that it may later safely be dereferenced -- memory barriers are
-required on the Alpha CPU.  Since the size of the array is stored
-with the array itself, there can be no array-size mismatches, so
-a simple check suffices.  The pointer to the structure corresponding
-to the desired IPC object is placed in "out", with NULL indicating
-a non-existent entry.  After acquiring "out->lock", the "out->deleted"
-flag indicates whether the IPC object is in the process of being
-deleted, and, if not, the pointer is returned::
-
-	struct kern_ipc_perm* ipc_lock(struct ipc_ids* ids, int id)
-	{
-		struct kern_ipc_perm* out;
-		int lid = id % SEQ_MULTIPLIER;
-		struct ipc_id_ary* entries;
-
-		rcu_read_lock();
-		entries = rcu_dereference(ids->entries);
-		if(lid >= entries->size) {
-			rcu_read_unlock();
-			return NULL;
-		}
-		out = entries->p[lid];
-		if(out == NULL) {
-			rcu_read_unlock();
-			return NULL;
-		}
-		spin_lock(&out->lock);
-
-		/* ipc_rmid() may have already freed the ID while ipc_lock
-		 * was spinning: here verify that the structure is still valid
-		 */
-		if (out->deleted) {
-			spin_unlock(&out->lock);
-			rcu_read_unlock();
-			return NULL;
-		}
-		return out;
-	}
-
-.. _answer_quick_quiz_seqlock:
-
-Answer to Quick Quiz:
-	Why is it so important that updates be rare when using seqlock?
-
-	The reason that it is important that updates be rare when
-	using seqlock is that frequent updates can livelock readers.
-	One way to avoid this problem is to assign a seqlock for
-	each array entry rather than to the entire array.
diff --git a/Documentation/RCU/checklist.rst b/Documentation/RCU/checklist.rst
index f4545b7c9a63..bd3c58c44bef 100644
--- a/Documentation/RCU/checklist.rst
+++ b/Documentation/RCU/checklist.rst
@@ -32,8 +32,8 @@ over a rather long period of time, but improvements are always welcome!
 	for lockless updates.  This does result in the mildly
 	counter-intuitive situation where rcu_read_lock() and
 	rcu_read_unlock() are used to protect updates, however, this
-	approach provides the same potential simplifications that garbage
-	collectors do.
+	approach can provide the same simplifications to certain types
+	of lockless algorithms that garbage collectors do.
 
 1.	Does the update code have proper mutual exclusion?
 
@@ -49,12 +49,12 @@ over a rather long period of time, but improvements are always welcome!
 	them -- even x86 allows later loads to be reordered to precede
 	earlier stores), and be prepared to explain why this added
 	complexity is worthwhile.  If you choose #c, be prepared to
-	explain how this single task does not become a major bottleneck on
-	big multiprocessor machines (for example, if the task is updating
-	information relating to itself that other tasks can read, there
-	by definition can be no bottleneck).  Note that the definition
-	of "large" has changed significantly:  Eight CPUs was "large"
-	in the year 2000, but a hundred CPUs was unremarkable in 2017.
+	explain how this single task does not become a major bottleneck
+	on large systems (for example, if the task is updating information
+	relating to itself that other tasks can read, there by definition
+	can be no bottleneck).	Note that the definition of "large" has
+	changed significantly:	Eight CPUs was "large" in the year 2000,
+	but a hundred CPUs was unremarkable in 2017.
 
 2.	Do the RCU read-side critical sections make proper use of
 	rcu_read_lock() and friends?  These primitives are needed
@@ -66,8 +66,13 @@ over a rather long period of time, but improvements are always welcome!
 	As a rough rule of thumb, any dereference of an RCU-protected
 	pointer must be covered by rcu_read_lock(), rcu_read_lock_bh(),
 	rcu_read_lock_sched(), or by the appropriate update-side lock.
-	Disabling of preemption can serve as rcu_read_lock_sched(), but
-	is less readable and prevents lockdep from detecting locking issues.
+	Explicit disabling of preemption (preempt_disable(), for example)
+	can serve as rcu_read_lock_sched(), but is less readable and
+	prevents lockdep from detecting locking issues.
+
+	Please note that you *cannot* rely on code known to be built
+	only in non-preemptible kernels.  Such code can and will break,
+	especially in kernels built with CONFIG_PREEMPT_COUNT=y.
 
 	Letting RCU-protected pointers "leak" out of an RCU read-side
 	critical section is every bit as bad as letting them leak out
@@ -92,33 +97,38 @@ over a rather long period of time, but improvements are always welcome!
 
 	b.	Proceed as in (a) above, but also maintain per-element
 		locks (that are acquired by both readers and writers)
-		that guard per-element state.  Of course, fields that
-		the readers refrain from accessing can be guarded by
-		some other lock acquired only by updaters, if desired.
+		that guard per-element state.  Fields that the readers
+		refrain from accessing can be guarded by some other lock
+		acquired only by updaters, if desired.
 
-		This works quite well, also.
+		This also works quite well.
 
 	c.	Make updates appear atomic to readers.	For example,
 		pointer updates to properly aligned fields will
 		appear atomic, as will individual atomic primitives.
 		Sequences of operations performed under a lock will *not*
 		appear to be atomic to RCU readers, nor will sequences
-		of multiple atomic primitives.
+		of multiple atomic primitives.	One alternative is to
+		move multiple individual fields to a separate structure,
+		thus solving the multiple-field problem by imposing an
+		additional level of indirection.
 
 		This can work, but is starting to get a bit tricky.
 
-	d.	Carefully order the updates and the reads so that
-		readers see valid data at all phases of the update.
-		This is often more difficult than it sounds, especially
-		given modern CPUs' tendency to reorder memory references.
-		One must usually liberally sprinkle memory barriers
-		(smp_wmb(), smp_rmb(), smp_mb()) through the code,
-		making it difficult to understand and to test.
-
-		It is usually better to group the changing data into
-		a separate structure, so that the change may be made
-		to appear atomic by updating a pointer to reference
-		a new structure containing updated values.
+	d.	Carefully order the updates and the reads so that readers
+		see valid data at all phases of the update.  This is often
+		more difficult than it sounds, especially given modern
+		CPUs' tendency to reorder memory references.  One must
+		usually liberally sprinkle memory-ordering operations
+		through the code, making it difficult to understand and
+		to test.  Where it works, it is better to use things
+		like smp_store_release() and smp_load_acquire(), but in
+		some cases the smp_mb() full memory barrier is required.
+
+		As noted earlier, it is usually better to group the
+		changing data into a separate structure, so that the
+		change may be made to appear atomic by updating a pointer
+		to reference a new structure containing updated values.
 
 4.	Weakly ordered CPUs pose special challenges.  Almost all CPUs
 	are weakly ordered -- even x86 CPUs allow later loads to be
@@ -140,8 +150,7 @@ over a rather long period of time, but improvements are always welcome!
 		prevents destructive compiler optimizations.  However,
 		with a bit of devious creativity, it is possible to
 		mishandle the return value from rcu_dereference().
-		Please see rcu_dereference.txt in this directory for
-		more information.
+		Please see rcu_dereference.rst for more information.
 
 		The rcu_dereference() primitive is used by the
 		various "_rcu()" list-traversal primitives, such
@@ -151,7 +160,7 @@ over a rather long period of time, but improvements are always welcome!
 		primitives.  This is particularly useful in code that
 		is common to readers and updaters.  However, lockdep
 		will complain if you access rcu_dereference() outside
-		of an RCU read-side critical section.  See lockdep.txt
+		of an RCU read-side critical section.  See lockdep.rst
 		to learn what to do about this.
 
 		Of course, neither rcu_dereference() nor the "_rcu()"
@@ -184,23 +193,29 @@ over a rather long period of time, but improvements are always welcome!
 		when publicizing a pointer to a structure that can
 		be traversed by an RCU read-side critical section.
 
-5.	If call_rcu() or call_srcu() is used, the callback function will
-	be called from softirq context.  In particular, it cannot block.
+5.	If any of call_rcu(), call_srcu(), call_rcu_tasks(),
+	call_rcu_tasks_rude(), or call_rcu_tasks_trace() is used,
+	the callback function may be invoked from softirq context,
+	and in any case with bottom halves disabled.  In particular,
+	this callback function cannot block.  If you need the callback
+	to block, run that code in a workqueue handler scheduled from
+	the callback.  The queue_rcu_work() function does this for you
+	in the case of call_rcu().
 
 6.	Since synchronize_rcu() can block, it cannot be called
 	from any sort of irq context.  The same rule applies
-	for synchronize_srcu(), synchronize_rcu_expedited(), and
-	synchronize_srcu_expedited().
+	for synchronize_srcu(), synchronize_rcu_expedited(),
+	synchronize_srcu_expedited(), synchronize_rcu_tasks(),
+	synchronize_rcu_tasks_rude(), and synchronize_rcu_tasks_trace().
 
 	The expedited forms of these primitives have the same semantics
-	as the non-expedited forms, but expediting is both expensive and
-	(with the exception of synchronize_srcu_expedited()) unfriendly
-	to real-time workloads.  Use of the expedited primitives should
-	be restricted to rare configuration-change operations that would
-	not normally be undertaken while a real-time workload is running.
-	However, real-time workloads can use rcupdate.rcu_normal kernel
-	boot parameter to completely disable expedited grace periods,
-	though this might have performance implications.
+	as the non-expedited forms, but expediting is more CPU intensive.
+	Use of the expedited primitives should be restricted to rare
+	configuration-change operations that would not normally be
+	undertaken while a real-time workload is running.  Note that
+	IPI-sensitive real-time workloads can use the rcupdate.rcu_normal
+	kernel boot parameter to completely disable expedited grace
+	periods, though this might have performance implications.
 
 	In particular, if you find yourself invoking one of the expedited
 	primitives repeatedly in a loop, please do everyone a favor:
@@ -208,8 +223,9 @@ over a rather long period of time, but improvements are always welcome!
 	a single non-expedited primitive to cover the entire batch.
 	This will very likely be faster than the loop containing the
 	expedited primitive, and will be much much easier on the rest
-	of the system, especially to real-time workloads running on
-	the rest of the system.
+	of the system, especially to real-time workloads running on the
+	rest of the system.  Alternatively, instead use asynchronous
+	primitives such as call_rcu().
 
 7.	As of v4.20, a given kernel implements only one RCU flavor, which
 	is RCU-sched for PREEMPTION=n and RCU-preempt for PREEMPTION=y.
@@ -232,7 +248,8 @@ over a rather long period of time, but improvements are always welcome!
 	the corresponding readers must use rcu_read_lock_trace() and
 	rcu_read_unlock_trace().  If an updater uses call_rcu_tasks_rude()
 	or synchronize_rcu_tasks_rude(), then the corresponding readers
-	must use anything that disables interrupts.
+	must use anything that disables preemption, for example,
+	preempt_disable() and preempt_enable().
 
 	Mixing things up will result in confusion and broken kernels, and
 	has even resulted in an exploitable security issue.  Therefore,
@@ -246,15 +263,16 @@ over a rather long period of time, but improvements are always welcome!
 	that this usage is safe is that readers can use anything that
 	disables BH when updaters use call_rcu() or synchronize_rcu().
 
-8.	Although synchronize_rcu() is slower than is call_rcu(), it
-	usually results in simpler code.  So, unless update performance is
-	critically important, the updaters cannot block, or the latency of
-	synchronize_rcu() is visible from userspace, synchronize_rcu()
-	should be used in preference to call_rcu().  Furthermore,
-	kfree_rcu() usually results in even simpler code than does
-	synchronize_rcu() without synchronize_rcu()'s multi-millisecond
-	latency.  So please take advantage of kfree_rcu()'s "fire and
-	forget" memory-freeing capabilities where it applies.
+8.	Although synchronize_rcu() is slower than is call_rcu(),
+	it usually results in simpler code.  So, unless update
+	performance is critically important, the updaters cannot block,
+	or the latency of synchronize_rcu() is visible from userspace,
+	synchronize_rcu() should be used in preference to call_rcu().
+	Furthermore, kfree_rcu() and kvfree_rcu() usually result
+	in even simpler code than does synchronize_rcu() without
+	synchronize_rcu()'s multi-millisecond latency.	So please take
+	advantage of kfree_rcu()'s and kvfree_rcu()'s "fire and forget"
+	memory-freeing capabilities where it applies.
 
 	An especially important property of the synchronize_rcu()
 	primitive is that it automatically self-limits: if grace periods
@@ -264,8 +282,8 @@ over a rather long period of time, but improvements are always welcome!
 	cases where grace periods are delayed, as failing to do so can
 	result in excessive realtime latencies or even OOM conditions.
 
-	Ways of gaining this self-limiting property when using call_rcu()
-	include:
+	Ways of gaining this self-limiting property when using call_rcu(),
+	kfree_rcu(), or kvfree_rcu() include:
 
 	a.	Keeping a count of the number of data-structure elements
 		used by the RCU-protected data structure, including
@@ -297,17 +315,21 @@ over a rather long period of time, but improvements are always welcome!
 		here is that superuser already has lots of ways to crash
 		the machine.
 
-	d.	Periodically invoke synchronize_rcu(), permitting a limited
+	d.	Periodically invoke rcu_barrier(), permitting a limited
 		number of updates per grace period.
 
-	The same cautions apply to call_srcu() and kfree_rcu().
+	The same cautions apply to call_srcu(), call_rcu_tasks(),
+	call_rcu_tasks_rude(), and call_rcu_tasks_trace().  This is
+	why there is an srcu_barrier(), rcu_barrier_tasks(),
+	rcu_barrier_tasks_rude(), and rcu_barrier_tasks_rude(),
+	respectively.
 
-	Note that although these primitives do take action to avoid memory
-	exhaustion when any given CPU has too many callbacks, a determined
-	user could still exhaust memory.  This is especially the case
-	if a system with a large number of CPUs has been configured to
-	offload all of its RCU callbacks onto a single CPU, or if the
-	system has relatively little free memory.
+	Note that although these primitives do take action to avoid
+	memory exhaustion when any given CPU has too many callbacks,
+	a determined user or administrator can still exhaust memory.
+	This is especially the case if a system with a large number of
+	CPUs has been configured to offload all of its RCU callbacks onto
+	a single CPU, or if the system has relatively little free memory.
 
 9.	All RCU list-traversal primitives, which include
 	rcu_dereference(), list_for_each_entry_rcu(), and
@@ -323,7 +345,7 @@ over a rather long period of time, but improvements are always welcome!
 	primitives when the update-side lock is held is that doing so
 	can be quite helpful in reducing code bloat when common code is
 	shared between readers and updaters.  Additional primitives
-	are provided for this case, as discussed in lockdep.txt.
+	are provided for this case, as discussed in lockdep.rst.
 
 	One exception to this rule is when data is only ever added to
 	the linked data structure, and is never removed during any
@@ -336,14 +358,14 @@ over a rather long period of time, but improvements are always welcome!
 	and you don't hold the appropriate update-side lock, you *must*
 	use the "_rcu()" variants of the list macros.  Failing to do so
 	will break Alpha, cause aggressive compilers to generate bad code,
-	and confuse people trying to read your code.
+	and confuse people trying to understand your code.
 
 11.	Any lock acquired by an RCU callback must be acquired elsewhere
-	with softirq disabled, e.g., via spin_lock_irqsave(),
-	spin_lock_bh(), etc.  Failing to disable softirq on a given
-	acquisition of that lock will result in deadlock as soon as
-	the RCU softirq handler happens to run your RCU callback while
-	interrupting that acquisition's critical section.
+	with softirq disabled, e.g., via spin_lock_bh().  Failing to
+	disable softirq on a given acquisition of that lock will result
+	in deadlock as soon as the RCU softirq handler happens to run
+	your RCU callback while interrupting that acquisition's critical
+	section.
 
 12.	RCU callbacks can be and are executed in parallel.  In many cases,
 	the callback code simply wrappers around kfree(), so that this
@@ -364,7 +386,17 @@ over a rather long period of time, but improvements are always welcome!
 	for some  real-time workloads, this is the whole point of using
 	the rcu_nocbs= kernel boot parameter.
 
-13.	Unlike other forms of RCU, it *is* permissible to block in an
+	In addition, do not assume that callbacks queued in a given order
+	will be invoked in that order, even if they all are queued on the
+	same CPU.  Furthermore, do not assume that same-CPU callbacks will
+	be invoked serially.  For example, in recent kernels, CPUs can be
+	switched between offloaded and de-offloaded callback invocation,
+	and while a given CPU is undergoing such a switch, its callbacks
+	might be concurrently invoked by that CPU's softirq handler and
+	that CPU's rcuo kthread.  At such times, that CPU's callbacks
+	might be executed both concurrently and out of order.
+
+13.	Unlike most flavors of RCU, it *is* permissible to block in an
 	SRCU read-side critical section (demarked by srcu_read_lock()
 	and srcu_read_unlock()), hence the "SRCU": "sleepable RCU".
 	Please note that if you don't need to sleep in read-side critical
@@ -404,6 +436,12 @@ over a rather long period of time, but improvements are always welcome!
 	never sends IPIs to other CPUs, so it is easier on
 	real-time workloads than is synchronize_rcu_expedited().
 
+	It is also permissible to sleep in RCU Tasks Trace read-side
+	critical, which are delimited by rcu_read_lock_trace() and
+	rcu_read_unlock_trace().  However, this is a specialized flavor
+	of RCU, and you should not use it without first checking with
+	its current users.  In most cases, you should instead use SRCU.
+
 	Note that rcu_assign_pointer() relates to SRCU just as it does to
 	other forms of RCU, but instead of rcu_dereference() you should
 	use srcu_dereference() in order to avoid lockdep splats.
@@ -434,50 +472,62 @@ over a rather long period of time, but improvements are always welcome!
 	find problems as follows:
 
 	CONFIG_PROVE_LOCKING:
-		check that accesses to RCU-protected data
-		structures are carried out under the proper RCU
-		read-side critical section, while holding the right
-		combination of locks, or whatever other conditions
-		are appropriate.
+		check that accesses to RCU-protected data structures
+		are carried out under the proper RCU read-side critical
+		section, while holding the right combination of locks,
+		or whatever other conditions are appropriate.
 
 	CONFIG_DEBUG_OBJECTS_RCU_HEAD:
-		check that you don't pass the
-		same object to call_rcu() (or friends) before an RCU
-		grace period has elapsed since the last time that you
-		passed that same object to call_rcu() (or friends).
+		check that you don't pass the same object to call_rcu()
+		(or friends) before an RCU grace period has elapsed
+		since the last time that you passed that same object to
+		call_rcu() (or friends).
 
 	__rcu sparse checks:
-		tag the pointer to the RCU-protected data
-		structure with __rcu, and sparse will warn you if you
-		access that pointer without the services of one of the
-		variants of rcu_dereference().
+		tag the pointer to the RCU-protected data structure
+		with __rcu, and sparse will warn you if you access that
+		pointer without the services of one of the variants
+		of rcu_dereference().
 
 	These debugging aids can help you find problems that are
 	otherwise extremely difficult to spot.
 
-17.	If you register a callback using call_rcu() or call_srcu(), and
-	pass in a function defined within a loadable module, then it in
-	necessary to wait for all pending callbacks to be invoked after
-	the last invocation and before unloading that module.  Note that
-	it is absolutely *not* sufficient to wait for a grace period!
-	The current (say) synchronize_rcu() implementation is *not*
-	guaranteed to wait for callbacks registered on other CPUs.
-	Or even on the current CPU if that CPU recently went offline
-	and came back online.
+17.	If you pass a callback function defined within a module to one of
+	call_rcu(), call_srcu(), call_rcu_tasks(), call_rcu_tasks_rude(),
+	or call_rcu_tasks_trace(), then it is necessary to wait for all
+	pending callbacks to be invoked before unloading that module.
+	Note that it is absolutely *not* sufficient to wait for a grace
+	period!  For example, synchronize_rcu() implementation is *not*
+	guaranteed to wait for callbacks registered on other CPUs via
+	call_rcu().  Or even on the current CPU if that CPU recently
+	went offline and came back online.
 
 	You instead need to use one of the barrier functions:
 
 	-	call_rcu() -> rcu_barrier()
 	-	call_srcu() -> srcu_barrier()
+	-	call_rcu_tasks() -> rcu_barrier_tasks()
+	-	call_rcu_tasks_rude() -> rcu_barrier_tasks_rude()
+	-	call_rcu_tasks_trace() -> rcu_barrier_tasks_trace()
 
 	However, these barrier functions are absolutely *not* guaranteed
-	to wait for a grace period.  In fact, if there are no call_rcu()
-	callbacks waiting anywhere in the system, rcu_barrier() is within
-	its rights to return immediately.
-
-	So if you need to wait for both an RCU grace period and for
-	all pre-existing call_rcu() callbacks, you will need to execute
-	both rcu_barrier() and synchronize_rcu(), if necessary, using
-	something like workqueues to to execute them concurrently.
-
-	See rcubarrier.txt for more information.
+	to wait for a grace period.  For example, if there are no
+	call_rcu() callbacks queued anywhere in the system, rcu_barrier()
+	can and will return immediately.
+
+	So if you need to wait for both a grace period and for all
+	pre-existing callbacks, you will need to invoke both functions,
+	with the pair depending on the flavor of RCU:
+
+	-	Either synchronize_rcu() or synchronize_rcu_expedited(),
+		together with rcu_barrier()
+	-	Either synchronize_srcu() or synchronize_srcu_expedited(),
+		together with and srcu_barrier()
+	-	synchronize_rcu_tasks() and rcu_barrier_tasks()
+	-	synchronize_tasks_rude() and rcu_barrier_tasks_rude()
+	-	synchronize_tasks_trace() and rcu_barrier_tasks_trace()
+
+	If necessary, you can use something like workqueues to execute
+	the requisite pair of functions concurrently.
+
+	See rcubarrier.rst for more information.
diff --git a/Documentation/RCU/index.rst b/Documentation/RCU/index.rst
index e703d3dbe60c..84a79903f6a8 100644
--- a/Documentation/RCU/index.rst
+++ b/Documentation/RCU/index.rst
@@ -9,7 +9,6 @@ RCU concepts
 .. toctree::
    :maxdepth: 3
 
-   arrayRCU
    checklist
    lockdep
    lockdep-splat
diff --git a/Documentation/RCU/listRCU.rst b/Documentation/RCU/listRCU.rst
index 2a643e293fb4..bdc4bcc5289f 100644
--- a/Documentation/RCU/listRCU.rst
+++ b/Documentation/RCU/listRCU.rst
@@ -3,11 +3,10 @@
 Using RCU to Protect Read-Mostly Linked Lists
 =============================================
 
-One of the best applications of RCU is to protect read-mostly linked lists
-(``struct list_head`` in list.h).  One big advantage of this approach
-is that all of the required memory barriers are included for you in
-the list macros.  This document describes several applications of RCU,
-with the best fits first.
+One of the most common uses of RCU is protecting read-mostly linked lists
+(``struct list_head`` in list.h).  One big advantage of this approach is
+that all of the required memory ordering is provided by the list macros.
+This document describes several list-based RCU use cases.
 
 
 Example 1: Read-mostly list: Deferred Destruction
@@ -35,7 +34,8 @@ The code traversing the list of all processes typically looks like::
 	}
 	rcu_read_unlock();
 
-The simplified code for removing a process from a task list is::
+The simplified and heavily inlined code for removing a process from a
+task list is::
 
 	void release_task(struct task_struct *p)
 	{
@@ -45,39 +45,48 @@ The simplified code for removing a process from a task list is::
 		call_rcu(&p->rcu, delayed_put_task_struct);
 	}
 
-When a process exits, ``release_task()`` calls ``list_del_rcu(&p->tasks)`` under
-``tasklist_lock`` writer lock protection, to remove the task from the list of
-all tasks. The ``tasklist_lock`` prevents concurrent list additions/removals
-from corrupting the list. Readers using ``for_each_process()`` are not protected
-with the ``tasklist_lock``. To prevent readers from noticing changes in the list
-pointers, the ``task_struct`` object is freed only after one or more grace
-periods elapse (with the help of call_rcu()). This deferring of destruction
-ensures that any readers traversing the list will see valid ``p->tasks.next``
-pointers and deletion/freeing can happen in parallel with traversal of the list.
-This pattern is also called an **existence lock**, since RCU pins the object in
-memory until all existing readers finish.
+When a process exits, ``release_task()`` calls ``list_del_rcu(&p->tasks)``
+via __exit_signal() and __unhash_process() under ``tasklist_lock``
+writer lock protection.  The list_del_rcu() invocation removes
+the task from the list of all tasks. The ``tasklist_lock``
+prevents concurrent list additions/removals from corrupting the
+list. Readers using ``for_each_process()`` are not protected with the
+``tasklist_lock``. To prevent readers from noticing changes in the list
+pointers, the ``task_struct`` object is freed only after one or more
+grace periods elapse, with the help of call_rcu(), which is invoked via
+put_task_struct_rcu_user(). This deferring of destruction ensures that
+any readers traversing the list will see valid ``p->tasks.next`` pointers
+and deletion/freeing can happen in parallel with traversal of the list.
+This pattern is also called an **existence lock**, since RCU refrains
+from invoking the delayed_put_task_struct() callback function until
+all existing readers finish, which guarantees that the ``task_struct``
+object in question will remain in existence until after the completion
+of all RCU readers that might possibly have a reference to that object.
 
 
 Example 2: Read-Side Action Taken Outside of Lock: No In-Place Updates
 ----------------------------------------------------------------------
 
-The best applications are cases where, if reader-writer locking were
-used, the read-side lock would be dropped before taking any action
-based on the results of the search.  The most celebrated example is
-the routing table.  Because the routing table is tracking the state of
-equipment outside of the computer, it will at times contain stale data.
-Therefore, once the route has been computed, there is no need to hold
-the routing table static during transmission of the packet.  After all,
-you can hold the routing table static all you want, but that won't keep
-the external Internet from changing, and it is the state of the external
-Internet that really matters.  In addition, routing entries are typically
-added or deleted, rather than being modified in place.
-
-A straightforward example of this use of RCU may be found in the
-system-call auditing support.  For example, a reader-writer locked
+Some reader-writer locking use cases compute a value while holding
+the read-side lock, but continue to use that value after that lock is
+released.  These use cases are often good candidates for conversion
+to RCU.  One prominent example involves network packet routing.
+Because the packet-routing data tracks the state of equipment outside
+of the computer, it will at times contain stale data.  Therefore, once
+the route has been computed, there is no need to hold the routing table
+static during transmission of the packet.  After all, you can hold the
+routing table static all you want, but that won't keep the external
+Internet from changing, and it is the state of the external Internet
+that really matters.  In addition, routing entries are typically added
+or deleted, rather than being modified in place.  This is a rare example
+of the finite speed of light and the non-zero size of atoms actually
+helping make synchronization be lighter weight.
+
+A straightforward example of this type of RCU use case may be found in
+the system-call auditing support.  For example, a reader-writer locked
 implementation of ``audit_filter_task()`` might be as follows::
 
-	static enum audit_state audit_filter_task(struct task_struct *tsk)
+	static enum audit_state audit_filter_task(struct task_struct *tsk, char **key)
 	{
 		struct audit_entry *e;
 		enum audit_state   state;
@@ -86,6 +95,8 @@ implementation of ``audit_filter_task()`` might be as follows::
 		/* Note: audit_filter_mutex held by caller. */
 		list_for_each_entry(e, &audit_tsklist, list) {
 			if (audit_filter_rules(tsk, &e->rule, NULL, &state)) {
+				if (state == AUDIT_STATE_RECORD)
+					*key = kstrdup(e->rule.filterkey, GFP_ATOMIC);
 				read_unlock(&auditsc_lock);
 				return state;
 			}
@@ -101,7 +112,7 @@ you are turning auditing off, it is OK to audit a few extra system calls.
 
 This means that RCU can be easily applied to the read side, as follows::
 
-	static enum audit_state audit_filter_task(struct task_struct *tsk)
+	static enum audit_state audit_filter_task(struct task_struct *tsk, char **key)
 	{
 		struct audit_entry *e;
 		enum audit_state   state;
@@ -110,6 +121,8 @@ This means that RCU can be easily applied to the read side, as follows::
 		/* Note: audit_filter_mutex held by caller. */
 		list_for_each_entry_rcu(e, &audit_tsklist, list) {
 			if (audit_filter_rules(tsk, &e->rule, NULL, &state)) {
+				if (state == AUDIT_STATE_RECORD)
+					*key = kstrdup(e->rule.filterkey, GFP_ATOMIC);
 				rcu_read_unlock();
 				return state;
 			}
@@ -118,13 +131,15 @@ This means that RCU can be easily applied to the read side, as follows::
 		return AUDIT_BUILD_CONTEXT;
 	}
 
-The ``read_lock()`` and ``read_unlock()`` calls have become rcu_read_lock()
-and rcu_read_unlock(), respectively, and the list_for_each_entry() has
-become list_for_each_entry_rcu().  The **_rcu()** list-traversal primitives
-insert the read-side memory barriers that are required on DEC Alpha CPUs.
+The read_lock() and read_unlock() calls have become rcu_read_lock()
+and rcu_read_unlock(), respectively, and the list_for_each_entry()
+has become list_for_each_entry_rcu().  The **_rcu()** list-traversal
+primitives add READ_ONCE() and diagnostic checks for incorrect use
+outside of an RCU read-side critical section.
 
 The changes to the update side are also straightforward. A reader-writer lock
-might be used as follows for deletion and insertion::
+might be used as follows for deletion and insertion in these simplified
+versions of audit_del_rule() and audit_add_rule()::
 
 	static inline int audit_del_rule(struct audit_rule *rule,
 					 struct list_head *list)
@@ -188,16 +203,16 @@ Following are the RCU equivalents for these two functions::
 		return 0;
 	}
 
-Normally, the ``write_lock()`` and ``write_unlock()`` would be replaced by a
+Normally, the write_lock() and write_unlock() would be replaced by a
 spin_lock() and a spin_unlock(). But in this case, all callers hold
 ``audit_filter_mutex``, so no additional locking is required. The
-``auditsc_lock`` can therefore be eliminated, since use of RCU eliminates the
+auditsc_lock can therefore be eliminated, since use of RCU eliminates the
 need for writers to exclude readers.
 
 The list_del(), list_add(), and list_add_tail() primitives have been
 replaced by list_del_rcu(), list_add_rcu(), and list_add_tail_rcu().
-The **_rcu()** list-manipulation primitives add memory barriers that are needed on
-weakly ordered CPUs (most of them!).  The list_del_rcu() primitive omits the
+The **_rcu()** list-manipulation primitives add memory barriers that are
+needed on weakly ordered CPUs.  The list_del_rcu() primitive omits the
 pointer poisoning debug-assist code that would otherwise cause concurrent
 readers to fail spectacularly.
 
@@ -238,7 +253,9 @@ need to be filled in)::
 The RCU version creates a copy, updates the copy, then replaces the old
 entry with the newly updated entry.  This sequence of actions, allowing
 concurrent reads while making a copy to perform an update, is what gives
-RCU (*read-copy update*) its name.  The RCU code is as follows::
+RCU (*read-copy update*) its name.
+
+The RCU version of audit_upd_rule() is as follows::
 
 	static inline int audit_upd_rule(struct audit_rule *rule,
 					 struct list_head *list,
@@ -267,6 +284,9 @@ RCU (*read-copy update*) its name.  The RCU code is as follows::
 Again, this assumes that the caller holds ``audit_filter_mutex``.  Normally, the
 writer lock would become a spinlock in this sort of code.
 
+The update_lsm_rule() does something very similar, for those who would
+prefer to look at real Linux-kernel code.
+
 Another use of this pattern can be found in the openswitch driver's *connection
 tracking table* code in ``ct_limit_set()``.  The table holds connection tracking
 entries and has a limit on the maximum entries.  There is one such table
@@ -281,9 +301,10 @@ Example 4: Eliminating Stale Data
 ---------------------------------
 
 The auditing example above tolerates stale data, as do most algorithms
-that are tracking external state.  Because there is a delay from the
-time the external state changes before Linux becomes aware of the change,
-additional RCU-induced staleness is generally not a problem.
+that are tracking external state.  After all, given there is a delay
+from the time the external state changes before Linux becomes aware
+of the change, and so as noted earlier, a small quantity of additional
+RCU-induced staleness is generally not a problem.
 
 However, there are many examples where stale data cannot be tolerated.
 One example in the Linux kernel is the System V IPC (see the shm_lock()
@@ -302,7 +323,7 @@ Quick Quiz:
 
 If the system-call audit module were to ever need to reject stale data, one way
 to accomplish this would be to add a ``deleted`` flag and a ``lock`` spinlock to the
-audit_entry structure, and modify ``audit_filter_task()`` as follows::
+``audit_entry`` structure, and modify audit_filter_task() as follows::
 
 	static enum audit_state audit_filter_task(struct task_struct *tsk)
 	{
@@ -319,6 +340,8 @@ audit_entry structure, and modify ``audit_filter_task()`` as follows::
 					return AUDIT_BUILD_CONTEXT;
 				}
 				rcu_read_unlock();
+				if (state == AUDIT_STATE_RECORD)
+					*key = kstrdup(e->rule.filterkey, GFP_ATOMIC);
 				return state;
 			}
 		}
@@ -326,12 +349,6 @@ audit_entry structure, and modify ``audit_filter_task()`` as follows::
 		return AUDIT_BUILD_CONTEXT;
 	}
 
-Note that this example assumes that entries are only added and deleted.
-Additional mechanism is required to deal correctly with the update-in-place
-performed by ``audit_upd_rule()``.  For one thing, ``audit_upd_rule()`` would
-need additional memory barriers to ensure that the list_add_rcu() was really
-executed before the list_del_rcu().
-
 The ``audit_del_rule()`` function would need to set the ``deleted`` flag under the
 spinlock as follows::
 
@@ -357,24 +374,32 @@ spinlock as follows::
 
 This too assumes that the caller holds ``audit_filter_mutex``.
 
+Note that this example assumes that entries are only added and deleted.
+Additional mechanism is required to deal correctly with the update-in-place
+performed by audit_upd_rule().  For one thing, audit_upd_rule() would
+need to hold the locks of both the old ``audit_entry`` and its replacement
+while executing the list_replace_rcu().
+
 
 Example 5: Skipping Stale Objects
 ---------------------------------
 
-For some usecases, reader performance can be improved by skipping stale objects
-during read-side list traversal if the object in concern is pending destruction
-after one or more grace periods. One such example can be found in the timerfd
-subsystem. When a ``CLOCK_REALTIME`` clock is reprogrammed - for example due to
-setting of the system time, then all programmed timerfds that depend on this
-clock get triggered and processes waiting on them to expire are woken up in
-advance of their scheduled expiry. To facilitate this, all such timers are added
-to an RCU-managed ``cancel_list`` when they are setup in
+For some use cases, reader performance can be improved by skipping
+stale objects during read-side list traversal, where stale objects
+are those that will be removed and destroyed after one or more grace
+periods. One such example can be found in the timerfd subsystem. When a
+``CLOCK_REALTIME`` clock is reprogrammed (for example due to setting
+of the system time) then all programmed ``timerfds`` that depend on
+this clock get triggered and processes waiting on them are awakened in
+advance of their scheduled expiry. To facilitate this, all such timers
+are added to an RCU-managed ``cancel_list`` when they are setup in
 ``timerfd_setup_cancel()``::
 
 	static void timerfd_setup_cancel(struct timerfd_ctx *ctx, int flags)
 	{
 		spin_lock(&ctx->cancel_lock);
-		if ((ctx->clockid == CLOCK_REALTIME &&
+		if ((ctx->clockid == CLOCK_REALTIME ||
+		     ctx->clockid == CLOCK_REALTIME_ALARM) &&
 		    (flags & TFD_TIMER_ABSTIME) && (flags & TFD_TIMER_CANCEL_ON_SET)) {
 			if (!ctx->might_cancel) {
 				ctx->might_cancel = true;
@@ -382,13 +407,16 @@ to an RCU-managed ``cancel_list`` when they are setup in
 				list_add_rcu(&ctx->clist, &cancel_list);
 				spin_unlock(&cancel_lock);
 			}
+		} else {
+			__timerfd_remove_cancel(ctx);
 		}
 		spin_unlock(&ctx->cancel_lock);
 	}
 
-When a timerfd is freed (fd is closed), then the ``might_cancel`` flag of the
-timerfd object is cleared, the object removed from the ``cancel_list`` and
-destroyed::
+When a timerfd is freed (fd is closed), then the ``might_cancel``
+flag of the timerfd object is cleared, the object removed from the
+``cancel_list`` and destroyed, as shown in this simplified and inlined
+version of timerfd_release()::
 
 	int timerfd_release(struct inode *inode, struct file *file)
 	{
@@ -403,7 +431,10 @@ destroyed::
 		}
 		spin_unlock(&ctx->cancel_lock);
 
-		hrtimer_cancel(&ctx->t.tmr);
+		if (isalarm(ctx))
+			alarm_cancel(&ctx->t.alarm);
+		else
+			hrtimer_cancel(&ctx->t.tmr);
 		kfree_rcu(ctx, rcu);
 		return 0;
 	}
@@ -416,6 +447,7 @@ objects::
 
 	void timerfd_clock_was_set(void)
 	{
+		ktime_t moffs = ktime_mono_to_real(0);
 		struct timerfd_ctx *ctx;
 		unsigned long flags;
 
@@ -424,7 +456,7 @@ objects::
 			if (!ctx->might_cancel)
 				continue;
 			spin_lock_irqsave(&ctx->wqh.lock, flags);
-			if (ctx->moffs != ktime_mono_to_real(0)) {
+			if (ctx->moffs != moffs) {
 				ctx->moffs = KTIME_MAX;
 				ctx->ticks++;
 				wake_up_locked_poll(&ctx->wqh, EPOLLIN);
@@ -434,10 +466,10 @@ objects::
 		rcu_read_unlock();
 	}
 
-The key point here is, because RCU-traversal of the ``cancel_list`` happens
-while objects are being added and removed to the list, sometimes the traversal
-can step on an object that has been removed from the list. In this example, it
-is seen that it is better to skip such objects using a flag.
+The key point is that because RCU-protected traversal of the
+``cancel_list`` happens concurrently with object addition and removal,
+sometimes the traversal can access an object that has been removed from
+the list. In this example, a flag is used to skip such objects.
 
 
 Summary
diff --git a/Documentation/RCU/lockdep.rst b/Documentation/RCU/lockdep.rst
index cc860a0c296b..69e73a39bd11 100644
--- a/Documentation/RCU/lockdep.rst
+++ b/Documentation/RCU/lockdep.rst
@@ -17,7 +17,9 @@ state::
 	rcu_read_lock_held() for normal RCU.
 	rcu_read_lock_bh_held() for RCU-bh.
 	rcu_read_lock_sched_held() for RCU-sched.
+	rcu_read_lock_any_held() for any of normal RCU, RCU-bh, and RCU-sched.
 	srcu_read_lock_held() for SRCU.
+	rcu_read_lock_trace_held() for RCU Tasks Trace.
 
 These functions are conservative, and will therefore return 1 if they
 aren't certain (for example, if CONFIG_DEBUG_LOCK_ALLOC is not set).
@@ -53,6 +55,8 @@ checking of rcu_dereference() primitives:
 		is invoked by both SRCU readers and updaters.
 	rcu_dereference_raw(p):
 		Don't check.  (Use sparingly, if at all.)
+	rcu_dereference_raw_check(p):
+		Don't do lockdep at all.  (Use sparingly, if at all.)
 	rcu_dereference_protected(p, c):
 		Use explicit check expression "c", and omit all barriers
 		and compiler constraints.  This is useful when the data
@@ -61,13 +65,12 @@ checking of rcu_dereference() primitives:
 	rcu_access_pointer(p):
 		Return the value of the pointer and omit all barriers,
 		but retain the compiler constraints that prevent duplicating
-		or coalescsing.  This is useful when when testing the
+		or coalescing.  This is useful when testing the
 		value of the pointer itself, for example, against NULL.
 
 The rcu_dereference_check() check expression can be any boolean
-expression, but would normally include a lockdep expression.  However,
-any boolean expression can be used.  For a moderately ornate example,
-consider the following::
+expression, but would normally include a lockdep expression.  For a
+moderately ornate example, consider the following::
 
 	file = rcu_dereference_check(fdt->fd[fd],
 				     lockdep_is_held(&files->file_lock) ||
@@ -93,10 +96,10 @@ code, it could instead be written as follows::
 					 atomic_read(&files->count) == 1);
 
 This would verify cases #2 and #3 above, and furthermore lockdep would
-complain if this was used in an RCU read-side critical section unless one
-of these two cases held.  Because rcu_dereference_protected() omits all
-barriers and compiler constraints, it generates better code than do the
-other flavors of rcu_dereference().  On the other hand, it is illegal
+complain even if this was used in an RCU read-side critical section unless
+one of these two cases held.  Because rcu_dereference_protected() omits
+all barriers and compiler constraints, it generates better code than do
+the other flavors of rcu_dereference().  On the other hand, it is illegal
 to use rcu_dereference_protected() if either the RCU-protected pointer
 or the RCU-protected data that it points to can change concurrently.
 
diff --git a/Documentation/RCU/rcu.rst b/Documentation/RCU/rcu.rst
index 0e03c6ef3147..bf6617b330a7 100644
--- a/Documentation/RCU/rcu.rst
+++ b/Documentation/RCU/rcu.rst
@@ -10,9 +10,8 @@ A "grace period" must elapse between the two parts, and this grace period
 must be long enough that any readers accessing the item being deleted have
 since dropped their references.  For example, an RCU-protected deletion
 from a linked list would first remove the item from the list, wait for
-a grace period to elapse, then free the element.  See the
-:ref:`Documentation/RCU/listRCU.rst <list_rcu_doc>` for more information on
-using RCU with linked lists.
+a grace period to elapse, then free the element.  See listRCU.rst for more
+information on using RCU with linked lists.
 
 Frequently Asked Questions
 --------------------------
@@ -50,7 +49,7 @@ Frequently Asked Questions
 - If I am running on a uniprocessor kernel, which can only do one
   thing at a time, why should I wait for a grace period?
 
-  See :ref:`Documentation/RCU/UP.rst <up_doc>` for more information.
+  See UP.rst for more information.
 
 - How can I see where RCU is currently used in the Linux kernel?
 
@@ -64,13 +63,13 @@ Frequently Asked Questions
 
 - What guidelines should I follow when writing code that uses RCU?
 
-  See the checklist.txt file in this directory.
+  See checklist.rst.
 
 - Why the name "RCU"?
 
   "RCU" stands for "read-copy update".
-  :ref:`Documentation/RCU/listRCU.rst <list_rcu_doc>` has more information on where
-  this name came from, search for "read-copy update" to find it.
+  listRCU.rst has more information on where this name came from, search
+  for "read-copy update" to find it.
 
 - I hear that RCU is patented?  What is with that?
 
@@ -78,15 +77,17 @@ Frequently Asked Questions
   search for the string "Patent" in Documentation/RCU/RTFP.txt to find them.
   Of these, one was allowed to lapse by the assignee, and the
   others have been contributed to the Linux kernel under GPL.
+  Many (but not all) have long since expired.
   There are now also LGPL implementations of user-level RCU
   available (https://liburcu.org/).
 
 - I hear that RCU needs work in order to support realtime kernels?
 
-  Realtime-friendly RCU can be enabled via the CONFIG_PREEMPT_RCU
+  Realtime-friendly RCU are enabled via the CONFIG_PREEMPTION
   kernel configuration parameter.
 
 - Where can I find more information on RCU?
 
   See the Documentation/RCU/RTFP.txt file.
-  Or point your browser at (http://www.rdrop.com/users/paulmck/RCU/).
+  Or point your browser at (https://docs.google.com/document/d/1X0lThx8OK0ZgLMqVoXiR4ZrGURHrXK6NyLRbeXe3Xac/edit)
+  or (https://docs.google.com/document/d/1GCdQC8SDbb54W1shjEXqGZ0Rq8a6kIeYutdSIajfpLA/edit?usp=sharing).
diff --git a/Documentation/RCU/rcu_dereference.rst b/Documentation/RCU/rcu_dereference.rst
index 0b418a5b243c..3b739f6243c8 100644
--- a/Documentation/RCU/rcu_dereference.rst
+++ b/Documentation/RCU/rcu_dereference.rst
@@ -19,8 +19,9 @@ Follow these rules to keep your RCU code working properly:
 	can reload the value, and won't your code have fun with two
 	different values for a single pointer!  Without rcu_dereference(),
 	DEC Alpha can load a pointer, dereference that pointer, and
-	return data preceding initialization that preceded the store of
-	the pointer.
+	return data preceding initialization that preceded the store
+	of the pointer.  (As noted later, in recent kernels READ_ONCE()
+	also prevents DEC Alpha from playing these tricks.)
 
 	In addition, the volatile cast in rcu_dereference() prevents the
 	compiler from deducing the resulting pointer value.  Please see
@@ -34,7 +35,7 @@ Follow these rules to keep your RCU code working properly:
 	takes on the role of the lockless_dereference() primitive that
 	was removed in v4.15.
 
--	You are only permitted to use rcu_dereference on pointer values.
+-	You are only permitted to use rcu_dereference() on pointer values.
 	The compiler simply knows too much about integral values to
 	trust it to carry dependencies through integer operations.
 	There are a very few exceptions, namely that you can temporarily
@@ -128,10 +129,16 @@ Follow these rules to keep your RCU code working properly:
 		This sort of comparison occurs frequently when scanning
 		RCU-protected circular linked lists.
 
-		Note that if checks for being within an RCU read-side
-		critical section are not required and the pointer is never
-		dereferenced, rcu_access_pointer() should be used in place
-		of rcu_dereference().
+		Note that if the pointer comparison is done outside
+		of an RCU read-side critical section, and the pointer
+		is never dereferenced, rcu_access_pointer() should be
+		used in place of rcu_dereference().  In most cases,
+		it is best to avoid accidental dereferences by testing
+		the rcu_access_pointer() return value directly, without
+		assigning it to a variable.
+
+		Within an RCU read-side critical section, there is little
+		reason to use rcu_access_pointer().
 
 	-	The comparison is against a pointer that references memory
 		that was initialized "a long time ago."  The reason
@@ -234,6 +241,7 @@ precautions.  To see this, consider the following code fragment::
 		struct foo *q;
 		int r1, r2;
 
+		rcu_read_lock();
 		p = rcu_dereference(gp2);
 		if (p == NULL)
 			return;
@@ -242,7 +250,10 @@ precautions.  To see this, consider the following code fragment::
 		if (p == q) {
 			/* The compiler decides that q->c is same as p->c. */
 			r2 = p->c; /* Could get 44 on weakly order system. */
+		} else {
+			r2 = p->c - r1; /* Unconditional access to p->c. */
 		}
+		rcu_read_unlock();
 		do_something_with(r1, r2);
 	}
 
@@ -291,6 +302,7 @@ Then one approach is to use locking, for example, as follows::
 		struct foo *q;
 		int r1, r2;
 
+		rcu_read_lock();
 		p = rcu_dereference(gp2);
 		if (p == NULL)
 			return;
@@ -300,7 +312,12 @@ Then one approach is to use locking, for example, as follows::
 		if (p == q) {
 			/* The compiler decides that q->c is same as p->c. */
 			r2 = p->c; /* Locking guarantees r2 == 144. */
+		} else {
+			spin_lock(&q->lock);
+			r2 = q->c - r1;
+			spin_unlock(&q->lock);
 		}
+		rcu_read_unlock();
 		spin_unlock(&p->lock);
 		do_something_with(r1, r2);
 	}
@@ -358,7 +375,7 @@ the exact value of "p" even in the not-equals case.  This allows the
 compiler to make the return values independent of the load from "gp",
 in turn destroying the ordering between this load and the loads of the
 return values.  This can result in "p->b" returning pre-initialization
-garbage values.
+garbage values on weakly ordered systems.
 
 In short, rcu_dereference() is *not* optional when you are going to
 dereference the resulting pointer.
@@ -424,7 +441,7 @@ member of the rcu_dereference() to use in various situations:
 SPARSE CHECKING OF RCU-PROTECTED POINTERS
 -----------------------------------------
 
-The sparse static-analysis tool checks for direct access to RCU-protected
+The sparse static-analysis tool checks for non-RCU access to RCU-protected
 pointers, which can result in "interesting" bugs due to compiler
 optimizations involving invented loads and perhaps also load tearing.
 For example, suppose someone mistakenly does something like this::
diff --git a/Documentation/RCU/rcubarrier.rst b/Documentation/RCU/rcubarrier.rst
index 3b4a24877496..6da7f66da2a8 100644
--- a/Documentation/RCU/rcubarrier.rst
+++ b/Documentation/RCU/rcubarrier.rst
@@ -5,37 +5,12 @@ RCU and Unloadable Modules
 
 [Originally published in LWN Jan. 14, 2007: http://lwn.net/Articles/217484/]
 
-RCU (read-copy update) is a synchronization mechanism that can be thought
-of as a replacement for read-writer locking (among other things), but with
-very low-overhead readers that are immune to deadlock, priority inversion,
-and unbounded latency. RCU read-side critical sections are delimited
-by rcu_read_lock() and rcu_read_unlock(), which, in non-CONFIG_PREEMPTION
-kernels, generate no code whatsoever.
-
-This means that RCU writers are unaware of the presence of concurrent
-readers, so that RCU updates to shared data must be undertaken quite
-carefully, leaving an old version of the data structure in place until all
-pre-existing readers have finished. These old versions are needed because
-such readers might hold a reference to them. RCU updates can therefore be
-rather expensive, and RCU is thus best suited for read-mostly situations.
-
-How can an RCU writer possibly determine when all readers are finished,
-given that readers might well leave absolutely no trace of their
-presence? There is a synchronize_rcu() primitive that blocks until all
-pre-existing readers have completed. An updater wishing to delete an
-element p from a linked list might do the following, while holding an
-appropriate lock, of course::
-
-	list_del_rcu(p);
-	synchronize_rcu();
-	kfree(p);
-
-But the above code cannot be used in IRQ context -- the call_rcu()
-primitive must be used instead. This primitive takes a pointer to an
-rcu_head struct placed within the RCU-protected data structure and
-another pointer to a function that may be invoked later to free that
-structure. Code to delete an element p from the linked list from IRQ
-context might then be as follows::
+RCU updaters sometimes use call_rcu() to initiate an asynchronous wait for
+a grace period to elapse.  This primitive takes a pointer to an rcu_head
+struct placed within the RCU-protected data structure and another pointer
+to a function that may be invoked later to free that structure. Code to
+delete an element p from the linked list from IRQ context might then be
+as follows::
 
 	list_del_rcu(p);
 	call_rcu(&p->rcu, p_callback);
@@ -54,7 +29,7 @@ IRQ context. The function p_callback() might be defined as follows::
 Unloading Modules That Use call_rcu()
 -------------------------------------
 
-But what if p_callback is defined in an unloadable module?
+But what if the p_callback() function is defined in an unloadable module?
 
 If we unload the module while some RCU callbacks are pending,
 the CPUs executing these callbacks are going to be severely
@@ -67,20 +42,21 @@ grace period to elapse, it does not wait for the callbacks to complete.
 
 One might be tempted to try several back-to-back synchronize_rcu()
 calls, but this is still not guaranteed to work. If there is a very
-heavy RCU-callback load, then some of the callbacks might be deferred
-in order to allow other processing to proceed. Such deferral is required
-in realtime kernels in order to avoid excessive scheduling latencies.
+heavy RCU-callback load, then some of the callbacks might be deferred in
+order to allow other processing to proceed. For but one example, such
+deferral is required in realtime kernels in order to avoid excessive
+scheduling latencies.
 
 
 rcu_barrier()
 -------------
 
-We instead need the rcu_barrier() primitive.  Rather than waiting for
-a grace period to elapse, rcu_barrier() waits for all outstanding RCU
-callbacks to complete.  Please note that rcu_barrier() does **not** imply
-synchronize_rcu(), in particular, if there are no RCU callbacks queued
-anywhere, rcu_barrier() is within its rights to return immediately,
-without waiting for a grace period to elapse.
+This situation can be handled by the rcu_barrier() primitive.  Rather
+than waiting for a grace period to elapse, rcu_barrier() waits for all
+outstanding RCU callbacks to complete.  Please note that rcu_barrier()
+does **not** imply synchronize_rcu(), in particular, if there are no RCU
+callbacks queued anywhere, rcu_barrier() is within its rights to return
+immediately, without waiting for anything, let alone a grace period.
 
 Pseudo-code using rcu_barrier() is as follows:
 
@@ -89,83 +65,86 @@ Pseudo-code using rcu_barrier() is as follows:
    3. Allow the module to be unloaded.
 
 There is also an srcu_barrier() function for SRCU, and you of course
-must match the flavor of rcu_barrier() with that of call_rcu().  If your
-module uses multiple flavors of call_rcu(), then it must also use multiple
-flavors of rcu_barrier() when unloading that module.  For example, if
-it uses call_rcu(), call_srcu() on srcu_struct_1, and call_srcu() on
-srcu_struct_2, then the following three lines of code will be required
-when unloading::
-
- 1 rcu_barrier();
- 2 srcu_barrier(&srcu_struct_1);
- 3 srcu_barrier(&srcu_struct_2);
-
-The rcutorture module makes use of rcu_barrier() in its exit function
-as follows::
-
- 1  static void
- 2  rcu_torture_cleanup(void)
- 3  {
- 4    int i;
- 5
- 6    fullstop = 1;
- 7    if (shuffler_task != NULL) {
- 8     VERBOSE_PRINTK_STRING("Stopping rcu_torture_shuffle task");
- 9     kthread_stop(shuffler_task);
- 10   }
- 11   shuffler_task = NULL;
+must match the flavor of srcu_barrier() with that of call_srcu().
+If your module uses multiple srcu_struct structures, then it must also
+use multiple invocations of srcu_barrier() when unloading that module.
+For example, if it uses call_rcu(), call_srcu() on srcu_struct_1, and
+call_srcu() on srcu_struct_2, then the following three lines of code
+will be required when unloading::
+
+  1  rcu_barrier();
+  2  srcu_barrier(&srcu_struct_1);
+  3  srcu_barrier(&srcu_struct_2);
+
+If latency is of the essence, workqueues could be used to run these
+three functions concurrently.
+
+An ancient version of the rcutorture module makes use of rcu_barrier()
+in its exit function as follows::
+
+  1  static void
+  2  rcu_torture_cleanup(void)
+  3  {
+  4    int i;
+  5
+  6    fullstop = 1;
+  7    if (shuffler_task != NULL) {
+  8      VERBOSE_PRINTK_STRING("Stopping rcu_torture_shuffle task");
+  9      kthread_stop(shuffler_task);
+ 10    }
+ 11    shuffler_task = NULL;
  12
- 13   if (writer_task != NULL) {
- 14     VERBOSE_PRINTK_STRING("Stopping rcu_torture_writer task");
- 15     kthread_stop(writer_task);
- 16   }
- 17   writer_task = NULL;
+ 13    if (writer_task != NULL) {
+ 14      VERBOSE_PRINTK_STRING("Stopping rcu_torture_writer task");
+ 15      kthread_stop(writer_task);
+ 16    }
+ 17    writer_task = NULL;
  18
- 19   if (reader_tasks != NULL) {
- 20     for (i = 0; i < nrealreaders; i++) {
- 21       if (reader_tasks[i] != NULL) {
- 22         VERBOSE_PRINTK_STRING(
- 23           "Stopping rcu_torture_reader task");
- 24         kthread_stop(reader_tasks[i]);
- 25       }
- 26       reader_tasks[i] = NULL;
- 27     }
- 28     kfree(reader_tasks);
- 29     reader_tasks = NULL;
- 30   }
- 31   rcu_torture_current = NULL;
+ 19    if (reader_tasks != NULL) {
+ 20      for (i = 0; i < nrealreaders; i++) {
+ 21        if (reader_tasks[i] != NULL) {
+ 22          VERBOSE_PRINTK_STRING(
+ 23            "Stopping rcu_torture_reader task");
+ 24          kthread_stop(reader_tasks[i]);
+ 25        }
+ 26        reader_tasks[i] = NULL;
+ 27      }
+ 28      kfree(reader_tasks);
+ 29      reader_tasks = NULL;
+ 30    }
+ 31    rcu_torture_current = NULL;
  32
- 33   if (fakewriter_tasks != NULL) {
- 34     for (i = 0; i < nfakewriters; i++) {
- 35       if (fakewriter_tasks[i] != NULL) {
- 36         VERBOSE_PRINTK_STRING(
- 37           "Stopping rcu_torture_fakewriter task");
- 38         kthread_stop(fakewriter_tasks[i]);
- 39       }
- 40       fakewriter_tasks[i] = NULL;
- 41     }
- 42     kfree(fakewriter_tasks);
- 43     fakewriter_tasks = NULL;
- 44   }
+ 33    if (fakewriter_tasks != NULL) {
+ 34      for (i = 0; i < nfakewriters; i++) {
+ 35        if (fakewriter_tasks[i] != NULL) {
+ 36          VERBOSE_PRINTK_STRING(
+ 37            "Stopping rcu_torture_fakewriter task");
+ 38          kthread_stop(fakewriter_tasks[i]);
+ 39        }
+ 40        fakewriter_tasks[i] = NULL;
+ 41      }
+ 42      kfree(fakewriter_tasks);
+ 43      fakewriter_tasks = NULL;
+ 44    }
  45
- 46   if (stats_task != NULL) {
- 47     VERBOSE_PRINTK_STRING("Stopping rcu_torture_stats task");
- 48     kthread_stop(stats_task);
- 49   }
- 50   stats_task = NULL;
+ 46    if (stats_task != NULL) {
+ 47      VERBOSE_PRINTK_STRING("Stopping rcu_torture_stats task");
+ 48      kthread_stop(stats_task);
+ 49    }
+ 50    stats_task = NULL;
  51
- 52   /* Wait for all RCU callbacks to fire. */
- 53   rcu_barrier();
+ 52    /* Wait for all RCU callbacks to fire. */
+ 53    rcu_barrier();
  54
- 55   rcu_torture_stats_print(); /* -After- the stats thread is stopped! */
+ 55    rcu_torture_stats_print(); /* -After- the stats thread is stopped! */
  56
- 57   if (cur_ops->cleanup != NULL)
- 58     cur_ops->cleanup();
- 59   if (atomic_read(&n_rcu_torture_error))
- 60     rcu_torture_print_module_parms("End of test: FAILURE");
- 61   else
- 62     rcu_torture_print_module_parms("End of test: SUCCESS");
- 63 }
+ 57    if (cur_ops->cleanup != NULL)
+ 58      cur_ops->cleanup();
+ 59    if (atomic_read(&n_rcu_torture_error))
+ 60      rcu_torture_print_module_parms("End of test: FAILURE");
+ 61    else
+ 62      rcu_torture_print_module_parms("End of test: SUCCESS");
+ 63  }
 
 Line 6 sets a global variable that prevents any RCU callbacks from
 re-posting themselves. This will not be necessary in most cases, since
@@ -190,16 +169,17 @@ Quick Quiz #1:
 :ref:`Answer to Quick Quiz #1 <answer_rcubarrier_quiz_1>`
 
 Your module might have additional complications. For example, if your
-module invokes call_rcu() from timers, you will need to first cancel all
-the timers, and only then invoke rcu_barrier() to wait for any remaining
+module invokes call_rcu() from timers, you will need to first refrain
+from posting new timers, cancel (or wait for) all the already-posted
+timers, and only then invoke rcu_barrier() to wait for any remaining
 RCU callbacks to complete.
 
-Of course, if you module uses call_rcu(), you will need to invoke
+Of course, if your module uses call_rcu(), you will need to invoke
 rcu_barrier() before unloading.  Similarly, if your module uses
 call_srcu(), you will need to invoke srcu_barrier() before unloading,
 and on the same srcu_struct structure.  If your module uses call_rcu()
-**and** call_srcu(), then you will need to invoke rcu_barrier() **and**
-srcu_barrier().
+**and** call_srcu(), then (as noted above) you will need to invoke
+rcu_barrier() **and** srcu_barrier().
 
 
 Implementing rcu_barrier()
@@ -211,27 +191,40 @@ queues. His implementation queues an RCU callback on each of the per-CPU
 callback queues, and then waits until they have all started executing, at
 which point, all earlier RCU callbacks are guaranteed to have completed.
 
-The original code for rcu_barrier() was as follows::
-
- 1  void rcu_barrier(void)
- 2  {
- 3    BUG_ON(in_interrupt());
- 4    /* Take cpucontrol mutex to protect against CPU hotplug */
- 5    mutex_lock(&rcu_barrier_mutex);
- 6    init_completion(&rcu_barrier_completion);
- 7    atomic_set(&rcu_barrier_cpu_count, 0);
- 8    on_each_cpu(rcu_barrier_func, NULL, 0, 1);
- 9    wait_for_completion(&rcu_barrier_completion);
- 10   mutex_unlock(&rcu_barrier_mutex);
- 11 }
-
-Line 3 verifies that the caller is in process context, and lines 5 and 10
+The original code for rcu_barrier() was roughly as follows::
+
+  1  void rcu_barrier(void)
+  2  {
+  3    BUG_ON(in_interrupt());
+  4    /* Take cpucontrol mutex to protect against CPU hotplug */
+  5    mutex_lock(&rcu_barrier_mutex);
+  6    init_completion(&rcu_barrier_completion);
+  7    atomic_set(&rcu_barrier_cpu_count, 1);
+  8    on_each_cpu(rcu_barrier_func, NULL, 0, 1);
+  9    if (atomic_dec_and_test(&rcu_barrier_cpu_count))
+ 10      complete(&rcu_barrier_completion);
+ 11    wait_for_completion(&rcu_barrier_completion);
+ 12    mutex_unlock(&rcu_barrier_mutex);
+ 13  }
+
+Line 3 verifies that the caller is in process context, and lines 5 and 12
 use rcu_barrier_mutex to ensure that only one rcu_barrier() is using the
 global completion and counters at a time, which are initialized on lines
 6 and 7. Line 8 causes each CPU to invoke rcu_barrier_func(), which is
 shown below. Note that the final "1" in on_each_cpu()'s argument list
 ensures that all the calls to rcu_barrier_func() will have completed
-before on_each_cpu() returns. Line 9 then waits for the completion.
+before on_each_cpu() returns. Line 9 removes the initial count from
+rcu_barrier_cpu_count, and if this count is now zero, line 10 finalizes
+the completion, which prevents line 11 from blocking.  Either way,
+line 11 then waits (if needed) for the completion.
+
+.. _rcubarrier_quiz_2:
+
+Quick Quiz #2:
+	Why doesn't line 8 initialize rcu_barrier_cpu_count to zero,
+	thereby avoiding the need for lines 9 and 10?
+
+:ref:`Answer to Quick Quiz #2 <answer_rcubarrier_quiz_2>`
 
 This code was rewritten in 2008 and several times thereafter, but this
 still gives the general idea.
@@ -239,21 +232,21 @@ still gives the general idea.
 The rcu_barrier_func() runs on each CPU, where it invokes call_rcu()
 to post an RCU callback, as follows::
 
- 1  static void rcu_barrier_func(void *notused)
- 2  {
- 3    int cpu = smp_processor_id();
- 4    struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
- 5    struct rcu_head *head;
- 6
- 7    head = &rdp->barrier;
- 8    atomic_inc(&rcu_barrier_cpu_count);
- 9    call_rcu(head, rcu_barrier_callback);
- 10 }
+  1  static void rcu_barrier_func(void *notused)
+  2  {
+  3    int cpu = smp_processor_id();
+  4    struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
+  5    struct rcu_head *head;
+  6
+  7    head = &rdp->barrier;
+  8    atomic_inc(&rcu_barrier_cpu_count);
+  9    call_rcu(head, rcu_barrier_callback);
+ 10  }
 
 Lines 3 and 4 locate RCU's internal per-CPU rcu_data structure,
 which contains the struct rcu_head that needed for the later call to
 call_rcu(). Line 7 picks up a pointer to this struct rcu_head, and line
-8 increments a global counter. This counter will later be decremented
+8 increments the global counter. This counter will later be decremented
 by the callback. Line 9 then registers the rcu_barrier_callback() on
 the current CPU's queue.
 
@@ -261,33 +254,34 @@ The rcu_barrier_callback() function simply atomically decrements the
 rcu_barrier_cpu_count variable and finalizes the completion when it
 reaches zero, as follows::
 
- 1 static void rcu_barrier_callback(struct rcu_head *notused)
- 2 {
- 3   if (atomic_dec_and_test(&rcu_barrier_cpu_count))
- 4     complete(&rcu_barrier_completion);
- 5 }
+  1  static void rcu_barrier_callback(struct rcu_head *notused)
+  2  {
+  3    if (atomic_dec_and_test(&rcu_barrier_cpu_count))
+  4      complete(&rcu_barrier_completion);
+  5  }
 
-.. _rcubarrier_quiz_2:
+.. _rcubarrier_quiz_3:
 
-Quick Quiz #2:
+Quick Quiz #3:
 	What happens if CPU 0's rcu_barrier_func() executes
 	immediately (thus incrementing rcu_barrier_cpu_count to the
 	value one), but the other CPU's rcu_barrier_func() invocations
 	are delayed for a full grace period? Couldn't this result in
 	rcu_barrier() returning prematurely?
 
-:ref:`Answer to Quick Quiz #2 <answer_rcubarrier_quiz_2>`
+:ref:`Answer to Quick Quiz #3 <answer_rcubarrier_quiz_3>`
 
 The current rcu_barrier() implementation is more complex, due to the need
 to avoid disturbing idle CPUs (especially on battery-powered systems)
 and the need to minimally disturb non-idle CPUs in real-time systems.
-However, the code above illustrates the concepts.
+In addition, a great many optimizations have been applied.  However,
+the code above illustrates the concepts.
 
 
 rcu_barrier() Summary
 ---------------------
 
-The rcu_barrier() primitive has seen relatively little use, since most
+The rcu_barrier() primitive is used relatively infrequently, since most
 code using RCU is in the core kernel rather than in modules. However, if
 you are using RCU from an unloadable module, you need to use rcu_barrier()
 so that your module may be safely unloaded.
@@ -302,7 +296,8 @@ Quick Quiz #1:
 	Is there any other situation where rcu_barrier() might
 	be required?
 
-Answer: Interestingly enough, rcu_barrier() was not originally
+Answer:
+	Interestingly enough, rcu_barrier() was not originally
 	implemented for module unloading. Nikita Danilov was using
 	RCU in a filesystem, which resulted in a similar situation at
 	filesystem-unmount time. Dipankar Sarma coded up rcu_barrier()
@@ -318,13 +313,48 @@ Answer: Interestingly enough, rcu_barrier() was not originally
 .. _answer_rcubarrier_quiz_2:
 
 Quick Quiz #2:
+	Why doesn't line 8 initialize rcu_barrier_cpu_count to zero,
+	thereby avoiding the need for lines 9 and 10?
+
+Answer:
+	Suppose that the on_each_cpu() function shown on line 8 was
+	delayed, so that CPU 0's rcu_barrier_func() executed and
+	the corresponding grace period elapsed, all before CPU 1's
+	rcu_barrier_func() started executing.  This would result in
+	rcu_barrier_cpu_count being decremented to zero, so that line
+	11's wait_for_completion() would return immediately, failing to
+	wait for CPU 1's callbacks to be invoked.
+
+	Note that this was not a problem when the rcu_barrier() code
+	was first added back in 2005.  This is because on_each_cpu()
+	disables preemption, which acted as an RCU read-side critical
+	section, thus preventing CPU 0's grace period from completing
+	until on_each_cpu() had dealt with all of the CPUs.  However,
+	with the advent of preemptible RCU, rcu_barrier() no longer
+	waited on nonpreemptible regions of code in preemptible kernels,
+	that being the job of the new rcu_barrier_sched() function.
+
+	However, with the RCU flavor consolidation around v4.20, this
+	possibility was once again ruled out, because the consolidated
+	RCU once again waits on nonpreemptible regions of code.
+
+	Nevertheless, that extra count might still be a good idea.
+	Relying on these sort of accidents of implementation can result
+	in later surprise bugs when the implementation changes.
+
+:ref:`Back to Quick Quiz #2 <rcubarrier_quiz_2>`
+
+.. _answer_rcubarrier_quiz_3:
+
+Quick Quiz #3:
 	What happens if CPU 0's rcu_barrier_func() executes
 	immediately (thus incrementing rcu_barrier_cpu_count to the
 	value one), but the other CPU's rcu_barrier_func() invocations
 	are delayed for a full grace period? Couldn't this result in
 	rcu_barrier() returning prematurely?
 
-Answer: This cannot happen. The reason is that on_each_cpu() has its last
+Answer:
+	This cannot happen. The reason is that on_each_cpu() has its last
 	argument, the wait flag, set to "1". This flag is passed through
 	to smp_call_function() and further to smp_call_function_on_cpu(),
 	causing this latter to spin until the cross-CPU invocation of
@@ -336,18 +366,15 @@ Answer: This cannot happen. The reason is that on_each_cpu() has its last
 
 	Therefore, on_each_cpu() disables preemption across its call
 	to smp_call_function() and also across the local call to
-	rcu_barrier_func(). This prevents the local CPU from context
-	switching, again preventing grace periods from completing. This
+	rcu_barrier_func(). Because recent RCU implementations treat
+	preemption-disabled regions of code as RCU read-side critical
+	sections, this prevents grace periods from completing. This
 	means that all CPUs have executed rcu_barrier_func() before
 	the first rcu_barrier_callback() can possibly execute, in turn
 	preventing rcu_barrier_cpu_count from prematurely reaching zero.
 
-	Currently, -rt implementations of RCU keep but a single global
-	queue for RCU callbacks, and thus do not suffer from this
-	problem. However, when the -rt RCU eventually does have per-CPU
-	callback queues, things will have to change. One simple change
-	is to add an rcu_read_lock() before line 8 of rcu_barrier()
-	and an rcu_read_unlock() after line 8 of this same function. If
-	you can think of a better change, please let me know!
+	But if on_each_cpu() ever decides to forgo disabling preemption,
+	as might well happen due to real-time latency considerations,
+	initializing rcu_barrier_cpu_count to one will save the day.
 
-:ref:`Back to Quick Quiz #2 <rcubarrier_quiz_2>`
+:ref:`Back to Quick Quiz #3 <rcubarrier_quiz_3>`
diff --git a/Documentation/RCU/rculist_nulls.rst b/Documentation/RCU/rculist_nulls.rst
index a9fc774bc400..9a734bf54b76 100644
--- a/Documentation/RCU/rculist_nulls.rst
+++ b/Documentation/RCU/rculist_nulls.rst
@@ -8,25 +8,25 @@ This section describes how to use hlist_nulls to
 protect read-mostly linked lists and
 objects using SLAB_TYPESAFE_BY_RCU allocations.
 
-Please read the basics in Documentation/RCU/listRCU.rst
+Please read the basics in listRCU.rst.
 
 Using 'nulls'
 =============
 
 Using special makers (called 'nulls') is a convenient way
-to solve following problem :
+to solve following problem.
 
-A typical RCU linked list managing objects which are
-allocated with SLAB_TYPESAFE_BY_RCU kmem_cache can
-use following algos :
+Without 'nulls', a typical RCU linked list managing objects which are
+allocated with SLAB_TYPESAFE_BY_RCU kmem_cache can use the following
+algorithms:
 
-1) Lookup algo
---------------
+1) Lookup algorithm
+-------------------
 
 ::
 
-  rcu_read_lock()
   begin:
+  rcu_read_lock()
   obj = lockless_lookup(key);
   if (obj) {
     if (!try_get_ref(obj)) // might fail for free objects
@@ -38,6 +38,7 @@ use following algos :
     */
     if (obj->key != key) { // not the object we expected
       put_ref(obj);
+      rcu_read_unlock();
       goto begin;
     }
   }
@@ -52,9 +53,9 @@ but a version with an additional memory barrier (smp_rmb())
   {
     struct hlist_node *node, *next;
     for (pos = rcu_dereference((head)->first);
-        pos && ({ next = pos->next; smp_rmb(); prefetch(next); 1; }) &&
-        ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });
-        pos = rcu_dereference(next))
+         pos && ({ next = pos->next; smp_rmb(); prefetch(next); 1; }) &&
+         ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });
+         pos = rcu_dereference(next))
       if (obj->key == key)
         return obj;
     return NULL;
@@ -64,9 +65,9 @@ And note the traditional hlist_for_each_entry_rcu() misses this smp_rmb()::
 
   struct hlist_node *node;
   for (pos = rcu_dereference((head)->first);
-        pos && ({ prefetch(pos->next); 1; }) &&
-        ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });
-        pos = rcu_dereference(pos->next))
+       pos && ({ prefetch(pos->next); 1; }) &&
+       ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });
+       pos = rcu_dereference(pos->next))
    if (obj->key == key)
      return obj;
   return NULL;
@@ -82,36 +83,32 @@ Quoting Corey Minyard::
   solved by pre-fetching the "next" field (with proper barriers) before
   checking the key."
 
-2) Insert algo
---------------
+2) Insertion algorithm
+----------------------
 
 We need to make sure a reader cannot read the new 'obj->obj_next' value
-and previous value of 'obj->key'. Or else, an item could be deleted
+and previous value of 'obj->key'. Otherwise, an item could be deleted
 from a chain, and inserted into another chain. If new chain was empty
-before the move, 'next' pointer is NULL, and lockless reader can
-not detect it missed following items in original chain.
+before the move, 'next' pointer is NULL, and lockless reader can not
+detect the fact that it missed following items in original chain.
 
 ::
 
   /*
-  * Please note that new inserts are done at the head of list,
-  * not in the middle or end.
-  */
+   * Please note that new inserts are done at the head of list,
+   * not in the middle or end.
+   */
   obj = kmem_cache_alloc(...);
   lock_chain(); // typically a spin_lock()
   obj->key = key;
-  /*
-  * we need to make sure obj->key is updated before obj->next
-  * or obj->refcnt
-  */
-  smp_wmb();
-  atomic_set(&obj->refcnt, 1);
+  atomic_set_release(&obj->refcnt, 1); // key before refcnt
   hlist_add_head_rcu(&obj->obj_node, list);
   unlock_chain(); // typically a spin_unlock()
 
 
-3) Remove algo
---------------
+3) Removal algorithm
+--------------------
+
 Nothing special here, we can use a standard RCU hlist deletion.
 But thanks to SLAB_TYPESAFE_BY_RCU, beware a deleted object can be reused
 very very fast (before the end of RCU grace period)
@@ -133,7 +130,7 @@ Avoiding extra smp_rmb()
 ========================
 
 With hlist_nulls we can avoid extra smp_rmb() in lockless_lookup()
-and extra smp_wmb() in insert function.
+and extra _release() in insert function.
 
 For example, if we choose to store the slot number as the 'nulls'
 end-of-list marker for each slot of the hash table, we can detect
@@ -142,59 +139,61 @@ to another chain) checking the final 'nulls' value if
 the lookup met the end of chain. If final 'nulls' value
 is not the slot number, then we must restart the lookup at
 the beginning. If the object was moved to the same chain,
-then the reader doesn't care : It might eventually
+then the reader doesn't care: It might occasionally
 scan the list again without harm.
 
 
-1) lookup algo
---------------
+1) lookup algorithm
+-------------------
 
 ::
 
   head = &table[slot];
-  rcu_read_lock();
   begin:
+  rcu_read_lock();
   hlist_nulls_for_each_entry_rcu(obj, node, head, member) {
     if (obj->key == key) {
-      if (!try_get_ref(obj)) // might fail for free objects
+      if (!try_get_ref(obj)) { // might fail for free objects
+	rcu_read_unlock();
         goto begin;
+      }
       if (obj->key != key) { // not the object we expected
         put_ref(obj);
+	rcu_read_unlock();
         goto begin;
       }
-    goto out;
+      goto out;
+    }
+  }
+
+  // If the nulls value we got at the end of this lookup is
+  // not the expected one, we must restart lookup.
+  // We probably met an item that was moved to another chain.
+  if (get_nulls_value(node) != slot) {
+    put_ref(obj);
+    rcu_read_unlock();
+    goto begin;
   }
-  /*
-  * if the nulls value we got at the end of this lookup is
-  * not the expected one, we must restart lookup.
-  * We probably met an item that was moved to another chain.
-  */
-  if (get_nulls_value(node) != slot)
-  goto begin;
   obj = NULL;
 
   out:
   rcu_read_unlock();
 
-2) Insert function
-------------------
+2) Insert algorithm
+-------------------
 
 ::
 
   /*
-  * Please note that new inserts are done at the head of list,
-  * not in the middle or end.
-  */
+   * Please note that new inserts are done at the head of list,
+   * not in the middle or end.
+   */
   obj = kmem_cache_alloc(cachep);
   lock_chain(); // typically a spin_lock()
   obj->key = key;
+  atomic_set_release(&obj->refcnt, 1); // key before refcnt
   /*
-  * changes to obj->key must be visible before refcnt one
-  */
-  smp_wmb();
-  atomic_set(&obj->refcnt, 1);
-  /*
-  * insert obj in RCU way (readers might be traversing chain)
-  */
+   * insert obj in RCU way (readers might be traversing chain)
+   */
   hlist_nulls_add_head_rcu(&obj->obj_node, list);
   unlock_chain(); // typically a spin_unlock()
diff --git a/Documentation/RCU/stallwarn.rst b/Documentation/RCU/stallwarn.rst
index 5036df24ae61..ca7b7cd806a1 100644
--- a/Documentation/RCU/stallwarn.rst
+++ b/Documentation/RCU/stallwarn.rst
@@ -25,10 +25,10 @@ warnings:
 
 -	A CPU looping with bottom halves disabled.
 
--	For !CONFIG_PREEMPTION kernels, a CPU looping anywhere in the kernel
-	without invoking schedule().  If the looping in the kernel is
-	really expected and desirable behavior, you might need to add
-	some calls to cond_resched().
+-	For !CONFIG_PREEMPTION kernels, a CPU looping anywhere in the
+	kernel without potentially invoking schedule().  If the looping
+	in the kernel is really expected and desirable behavior, you
+	might need to add some calls to cond_resched().
 
 -	Booting Linux using a console connection that is too slow to
 	keep up with the boot-time console-message rate.  For example,
@@ -96,18 +96,29 @@ warnings:
 	the ``rcu_.*timer wakeup didn't happen for`` console-log message,
 	which will include additional debugging information.
 
+-	A low-level kernel issue that either fails to invoke one of the
+	variants of rcu_eqs_enter(true), rcu_eqs_exit(true), ct_idle_enter(),
+	ct_idle_exit(), ct_irq_enter(), or ct_irq_exit() on the one
+	hand, or that invokes one of them too many times on the other.
+	Historically, the most frequent issue has been an omission
+	of either irq_enter() or irq_exit(), which in turn invoke
+	ct_irq_enter() or ct_irq_exit(), respectively.  Building your
+	kernel with CONFIG_RCU_EQS_DEBUG=y can help track down these types
+	of issues, which sometimes arise in architecture-specific code.
+
 -	A bug in the RCU implementation.
 
--	A hardware failure.  This is quite unlikely, but has occurred
-	at least once in real life.  A CPU failed in a running system,
-	becoming unresponsive, but not causing an immediate crash.
-	This resulted in a series of RCU CPU stall warnings, eventually
-	leading the realization that the CPU had failed.
+-	A hardware failure.  This is quite unlikely, but is not at all
+	uncommon in large datacenter.  In one memorable case some decades
+	back, a CPU failed in a running system, becoming unresponsive,
+	but not causing an immediate crash.  This resulted in a series
+	of RCU CPU stall warnings, eventually leading the realization
+	that the CPU had failed.
 
-The RCU, RCU-sched, and RCU-tasks implementations have CPU stall warning.
-Note that SRCU does *not* have CPU stall warnings.  Please note that
-RCU only detects CPU stalls when there is a grace period in progress.
-No grace period, no CPU stall warnings.
+The RCU, RCU-sched, RCU-tasks, and RCU-tasks-trace implementations have
+CPU stall warning.  Note that SRCU does *not* have CPU stall warnings.
+Please note that RCU only detects CPU stalls when there is a grace period
+in progress.  No grace period, no CPU stall warnings.
 
 To diagnose the cause of the stall, inspect the stack traces.
 The offending function will usually be near the top of the stack.
@@ -152,6 +163,26 @@ CONFIG_RCU_CPU_STALL_TIMEOUT
 	Stall-warning messages may be enabled and disabled completely via
 	/sys/module/rcupdate/parameters/rcu_cpu_stall_suppress.
 
+CONFIG_RCU_EXP_CPU_STALL_TIMEOUT
+--------------------------------
+
+	Same as the CONFIG_RCU_CPU_STALL_TIMEOUT parameter but only for
+	the expedited grace period. This parameter defines the period
+	of time that RCU will wait from the beginning of an expedited
+	grace period until it issues an RCU CPU stall warning. This time
+	period is normally 20 milliseconds on Android devices.	A zero
+	value causes the CONFIG_RCU_CPU_STALL_TIMEOUT value to be used,
+	after conversion to milliseconds.
+
+	This configuration parameter may be changed at runtime via the
+	/sys/module/rcupdate/parameters/rcu_exp_cpu_stall_timeout, however
+	this parameter is checked only at the beginning of a cycle. If you
+	are in a current stall cycle, setting it to a new value will change
+	the timeout for the -next- stall.
+
+	Stall-warning messages may be enabled and disabled completely via
+	/sys/module/rcupdate/parameters/rcu_cpu_stall_suppress.
+
 RCU_STALL_DELAY_DELTA
 ---------------------
 
@@ -175,16 +206,21 @@ RCU_STALL_RAT_DELAY
 rcupdate.rcu_task_stall_timeout
 -------------------------------
 
-	This boot/sysfs parameter controls the RCU-tasks stall warning
-	interval.  A value of zero or less suppresses RCU-tasks stall
-	warnings.  A positive value sets the stall-warning interval
-	in seconds.  An RCU-tasks stall warning starts with the line:
+	This boot/sysfs parameter controls the RCU-tasks and
+	RCU-tasks-trace stall warning intervals.  A value of zero or less
+	suppresses RCU-tasks stall warnings.  A positive value sets the
+	stall-warning interval in seconds.  An RCU-tasks stall warning
+	starts with the line:
 
 		INFO: rcu_tasks detected stalls on tasks:
 
 	And continues with the output of sched_show_task() for each
 	task stalling the current RCU-tasks grace period.
 
+	An RCU-tasks-trace stall warning starts (and continues) similarly:
+
+		INFO: rcu_tasks_trace detected stalls on tasks
+
 
 Interpreting RCU's CPU Stall-Detector "Splats"
 ==============================================
@@ -218,7 +254,8 @@ dynticks counter, which will have an even-numbered value if the CPU
 is in dyntick-idle mode and an odd-numbered value otherwise.  The hex
 number between the two "/"s is the value of the nesting, which will be
 a small non-negative number if in the idle loop (as shown above) and a
-very large positive number otherwise.
+very large positive number otherwise.  The number following the final
+"/" is the NMI nesting, which will be a small non-negative number.
 
 The "softirq=" portion of the message tracks the number of RCU softirq
 handlers that the stalled CPU has executed.  The number before the "/"
@@ -244,17 +281,6 @@ period (in this case 2603), the grace-period sequence number (7075), and
 an estimate of the total number of RCU callbacks queued across all CPUs
 (625 in this case).
 
-In kernels with CONFIG_RCU_FAST_NO_HZ, more information is printed
-for each CPU::
-
-	0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 dyntick_enabled: 1
-
-The "last_accelerate:" prints the low-order 16 bits (in hex) of the
-jiffies counter when this CPU last invoked rcu_try_advance_all_cbs()
-from rcu_needs_cpu() or last invoked rcu_accelerate_cbs() from
-rcu_prepare_for_idle(). "dyntick_enabled: 1" indicates that dyntick-idle
-processing is enabled.
-
 If the grace period ends just as the stall warning starts printing,
 there will be a spurious stall-warning message, which will include
 the following::
@@ -364,3 +390,95 @@ for example, "P3421".
 
 It is entirely possible to see stall warnings from normal and from
 expedited grace periods at about the same time during the same run.
+
+RCU_CPU_STALL_CPUTIME
+=====================
+
+In kernels built with CONFIG_RCU_CPU_STALL_CPUTIME=y or booted with
+rcupdate.rcu_cpu_stall_cputime=1, the following additional information
+is supplied with each RCU CPU stall warning::
+
+  rcu:          hardirqs   softirqs   csw/system
+  rcu:  number:      624         45            0
+  rcu: cputime:       69          1         2425   ==> 2500(ms)
+
+These statistics are collected during the sampling period. The values
+in row "number:" are the number of hard interrupts, number of soft
+interrupts, and number of context switches on the stalled CPU. The
+first three values in row "cputime:" indicate the CPU time in
+milliseconds consumed by hard interrupts, soft interrupts, and tasks
+on the stalled CPU.  The last number is the measurement interval, again
+in milliseconds.  Because user-mode tasks normally do not cause RCU CPU
+stalls, these tasks are typically kernel tasks, which is why only the
+system CPU time are considered.
+
+The sampling period is shown as follows::
+
+  |<------------first timeout---------->|<-----second timeout----->|
+  |<--half timeout-->|<--half timeout-->|                          |
+  |                  |<--first period-->|                          |
+  |                  |<-----------second sampling period---------->|
+  |                  |                  |                          |
+             snapshot time point    1st-stall                  2nd-stall
+
+The following describes four typical scenarios:
+
+1. A CPU looping with interrupts disabled.
+
+   ::
+
+     rcu:          hardirqs   softirqs   csw/system
+     rcu:  number:        0          0            0
+     rcu: cputime:        0          0            0   ==> 2500(ms)
+
+   Because interrupts have been disabled throughout the measurement
+   interval, there are no interrupts and no context switches.
+   Furthermore, because CPU time consumption was measured using interrupt
+   handlers, the system CPU consumption is misleadingly measured as zero.
+   This scenario will normally also have "(0 ticks this GP)" printed on
+   this CPU's summary line.
+
+2. A CPU looping with bottom halves disabled.
+
+   This is similar to the previous example, but with non-zero number of
+   and CPU time consumed by hard interrupts, along with non-zero CPU
+   time consumed by in-kernel execution::
+
+     rcu:          hardirqs   softirqs   csw/system
+     rcu:  number:      624          0            0
+     rcu: cputime:       49          0         2446   ==> 2500(ms)
+
+   The fact that there are zero softirqs gives a hint that these were
+   disabled, perhaps via local_bh_disable().  It is of course possible
+   that there were no softirqs, perhaps because all events that would
+   result in softirq execution are confined to other CPUs.  In this case,
+   the diagnosis should continue as shown in the next example.
+
+3. A CPU looping with preemption disabled.
+
+   Here, only the number of context switches is zero::
+
+     rcu:          hardirqs   softirqs   csw/system
+     rcu:  number:      624         45            0
+     rcu: cputime:       69          1         2425   ==> 2500(ms)
+
+   This situation hints that the stalled CPU was looping with preemption
+   disabled.
+
+4. No looping, but massive hard and soft interrupts.
+
+   ::
+
+     rcu:          hardirqs   softirqs   csw/system
+     rcu:  number:       xx         xx            0
+     rcu: cputime:       xx         xx            0   ==> 2500(ms)
+
+   Here, the number and CPU time of hard interrupts are all non-zero,
+   but the number of context switches and the in-kernel CPU time consumed
+   are zero. The number and cputime of soft interrupts will usually be
+   non-zero, but could be zero, for example, if the CPU was spinning
+   within a single hard interrupt handler.
+
+   If this type of RCU CPU stall warning can be reproduced, you can
+   narrow it down by looking at /proc/interrupts or by writing code to
+   trace each interrupt, for example, by referring to show_interrupts().
diff --git a/Documentation/RCU/torture.rst b/Documentation/RCU/torture.rst
index a90147713062..b3b6dfa85248 100644
--- a/Documentation/RCU/torture.rst
+++ b/Documentation/RCU/torture.rst
@@ -206,23 +206,34 @@ values for memory may require disabling the callback-flooding tests
 using the --bootargs parameter discussed below.
 
 Sometimes additional debugging is useful, and in such cases the --kconfig
-parameter to kvm.sh may be used, for example, ``--kconfig 'CONFIG_KASAN=y'``.
+parameter to kvm.sh may be used, for example, ``--kconfig 'CONFIG_RCU_EQS_DEBUG=y'``.
+In addition, there are the --gdb, --kasan, and --kcsan parameters.
+Note that --gdb limits you to one scenario per kvm.sh run and requires
+that you have another window open from which to run ``gdb`` as instructed
+by the script.
 
 Kernel boot arguments can also be supplied, for example, to control
 rcutorture's module parameters.  For example, to test a change to RCU's
 CPU stall-warning code, use "--bootargs 'rcutorture.stall_cpu=30'".
 This will of course result in the scripting reporting a failure, namely
-the resuling RCU CPU stall warning.  As noted above, reducing memory may
+the resulting RCU CPU stall warning.  As noted above, reducing memory may
 require disabling rcutorture's callback-flooding tests::
 
 	kvm.sh --cpus 448 --configs '56*TREE04' --memory 128M \
 		--bootargs 'rcutorture.fwd_progress=0'
 
 Sometimes all that is needed is a full set of kernel builds.  This is
-what the --buildonly argument does.
+what the --buildonly parameter does.
 
-Finally, the --trust-make argument allows each kernel build to reuse what
-it can from the previous kernel build.
+The --duration parameter can override the default run time of 30 minutes.
+For example, ``--duration 2d`` would run for two days, ``--duration 3h``
+would run for three hours, ``--duration 5m`` would run for five minutes,
+and ``--duration 45s`` would run for 45 seconds.  This last can be useful
+for tracking down rare boot-time failures.
+
+Finally, the --trust-make parameter allows each kernel build to reuse what
+it can from the previous kernel build.  Please note that without the
+--trust-make parameter, your tags files may be demolished.
 
 There are additional more arcane arguments that are documented in the
 source code of the kvm.sh script.
@@ -291,3 +302,73 @@ the following summary at the end of the run on a 12-CPU system::
     TREE07 ------- 167347 GPs (30.9902/s) [rcu: g1079021 f0x0 ] n_max_cbs: 478732
     CPU count limited from 16 to 12
     TREE09 ------- 752238 GPs (139.303/s) [rcu: g13075057 f0x0 ] n_max_cbs: 99011
+
+
+Repeated Runs
+=============
+
+Suppose that you are chasing down a rare boot-time failure.  Although you
+could use kvm.sh, doing so will rebuild the kernel on each run.  If you
+need (say) 1,000 runs to have confidence that you have fixed the bug,
+these pointless rebuilds can become extremely annoying.
+
+This is why kvm-again.sh exists.
+
+Suppose that a previous kvm.sh run left its output in this directory::
+
+	tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28
+
+Then this run can be re-run without rebuilding as follow:
+
+	kvm-again.sh tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28
+
+A few of the original run's kvm.sh parameters may be overridden, perhaps
+most notably --duration and --bootargs.  For example::
+
+	kvm-again.sh tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28 \
+		--duration 45s
+
+would re-run the previous test, but for only 45 seconds, thus facilitating
+tracking down the aforementioned rare boot-time failure.
+
+
+Distributed Runs
+================
+
+Although kvm.sh is quite useful, its testing is confined to a single
+system.  It is not all that hard to use your favorite framework to cause
+(say) 5 instances of kvm.sh to run on your 5 systems, but this will very
+likely unnecessarily rebuild kernels.  In addition, manually distributing
+the desired rcutorture scenarios across the available systems can be
+painstaking and error-prone.
+
+And this is why the kvm-remote.sh script exists.
+
+If you the following command works::
+
+	ssh system0 date
+
+and if it also works for system1, system2, system3, system4, and system5,
+and all of these systems have 64 CPUs, you can type::
+
+	kvm-remote.sh "system0 system1 system2 system3 system4 system5" \
+		--cpus 64 --duration 8h --configs "5*CFLIST"
+
+This will build each default scenario's kernel on the local system, then
+spread each of five instances of each scenario over the systems listed,
+running each scenario for eight hours.  At the end of the runs, the
+results will be gathered, recorded, and printed.  Most of the parameters
+that kvm.sh will accept can be passed to kvm-remote.sh, but the list of
+systems must come first.
+
+The kvm.sh ``--dryrun scenarios`` argument is useful for working out
+how many scenarios may be run in one batch across a group of systems.
+
+You can also re-run a previous remote run in a manner similar to kvm.sh:
+
+	kvm-remote.sh "system0 system1 system2 system3 system4 system5" \
+		tools/testing/selftests/rcutorture/res/2022.11.03-11.26.28-remote \
+		--duration 24h
+
+In this case, most of the kvm-again.sh parameters may be supplied following
+the pathname of the old run-results directory.
diff --git a/Documentation/RCU/whatisRCU.rst b/Documentation/RCU/whatisRCU.rst
index 17e95ab2a201..8eddef28d3a1 100644
--- a/Documentation/RCU/whatisRCU.rst
+++ b/Documentation/RCU/whatisRCU.rst
@@ -6,26 +6,33 @@ What is RCU?  --  "Read, Copy, Update"
 Please note that the "What is RCU?" LWN series is an excellent place
 to start learning about RCU:
 
-| 1.	What is RCU, Fundamentally?  http://lwn.net/Articles/262464/
-| 2.	What is RCU? Part 2: Usage   http://lwn.net/Articles/263130/
-| 3.	RCU part 3: the RCU API      http://lwn.net/Articles/264090/
-| 4.	The RCU API, 2010 Edition    http://lwn.net/Articles/418853/
-| 	2010 Big API Table           http://lwn.net/Articles/419086/
-| 5.	The RCU API, 2014 Edition    http://lwn.net/Articles/609904/
-|	2014 Big API Table           http://lwn.net/Articles/609973/
+| 1.	What is RCU, Fundamentally?  https://lwn.net/Articles/262464/
+| 2.	What is RCU? Part 2: Usage   https://lwn.net/Articles/263130/
+| 3.	RCU part 3: the RCU API      https://lwn.net/Articles/264090/
+| 4.	The RCU API, 2010 Edition    https://lwn.net/Articles/418853/
+| 	2010 Big API Table           https://lwn.net/Articles/419086/
+| 5.	The RCU API, 2014 Edition    https://lwn.net/Articles/609904/
+|	2014 Big API Table           https://lwn.net/Articles/609973/
+| 6.	The RCU API, 2019 Edition    https://lwn.net/Articles/777036/
+|	2019 Big API Table           https://lwn.net/Articles/777165/
+
+For those preferring video:
+
+| 1.	Unraveling RCU Mysteries: Fundamentals          https://www.linuxfoundation.org/webinars/unraveling-rcu-usage-mysteries
+| 2.	Unraveling RCU Mysteries: Additional Use Cases  https://www.linuxfoundation.org/webinars/unraveling-rcu-usage-mysteries-additional-use-cases
 
 
 What is RCU?
 
 RCU is a synchronization mechanism that was added to the Linux kernel
 during the 2.5 development effort that is optimized for read-mostly
-situations.  Although RCU is actually quite simple once you understand it,
-getting there can sometimes be a challenge.  Part of the problem is that
-most of the past descriptions of RCU have been written with the mistaken
-assumption that there is "one true way" to describe RCU.  Instead,
-the experience has been that different people must take different paths
-to arrive at an understanding of RCU.  This document provides several
-different paths, as follows:
+situations.  Although RCU is actually quite simple, making effective use
+of it requires you to think differently about your code.  Another part
+of the problem is the mistaken assumption that there is "one true way" to
+describe and to use RCU.  Instead, the experience has been that different
+people must take different paths to arrive at an understanding of RCU,
+depending on their experiences and use cases.  This document provides
+several different paths, as follows:
 
 :ref:`1.	RCU OVERVIEW <1_whatisRCU>`
 
@@ -39,9 +46,11 @@ different paths, as follows:
 
 :ref:`6.	ANALOGY WITH READER-WRITER LOCKING <6_whatisRCU>`
 
-:ref:`7.	FULL LIST OF RCU APIs <7_whatisRCU>`
+:ref:`7.	ANALOGY WITH REFERENCE COUNTING <7_whatisRCU>`
+
+:ref:`8.	FULL LIST OF RCU APIs <8_whatisRCU>`
 
-:ref:`8.	ANSWERS TO QUICK QUIZZES <8_whatisRCU>`
+:ref:`9.	ANSWERS TO QUICK QUIZZES <9_whatisRCU>`
 
 People who prefer starting with a conceptual overview should focus on
 Section 1, though most readers will profit by reading this section at
@@ -153,34 +162,36 @@ rcu_read_lock()
 ^^^^^^^^^^^^^^^
 	void rcu_read_lock(void);
 
-	Used by a reader to inform the reclaimer that the reader is
-	entering an RCU read-side critical section.  It is illegal
-	to block while in an RCU read-side critical section, though
-	kernels built with CONFIG_PREEMPT_RCU can preempt RCU
-	read-side critical sections.  Any RCU-protected data structure
-	accessed during an RCU read-side critical section is guaranteed to
-	remain unreclaimed for the full duration of that critical section.
-	Reference counts may be used in conjunction with RCU to maintain
-	longer-term references to data structures.
+	This temporal primitive is used by a reader to inform the
+	reclaimer that the reader is entering an RCU read-side critical
+	section.  It is illegal to block while in an RCU read-side
+	critical section, though kernels built with CONFIG_PREEMPT_RCU
+	can preempt RCU read-side critical sections.  Any RCU-protected
+	data structure accessed during an RCU read-side critical section
+	is guaranteed to remain unreclaimed for the full duration of that
+	critical section.  Reference counts may be used in conjunction
+	with RCU to maintain longer-term references to data structures.
 
 rcu_read_unlock()
 ^^^^^^^^^^^^^^^^^
 	void rcu_read_unlock(void);
 
-	Used by a reader to inform the reclaimer that the reader is
-	exiting an RCU read-side critical section.  Note that RCU
-	read-side critical sections may be nested and/or overlapping.
+	This temporal primitives is used by a reader to inform the
+	reclaimer that the reader is exiting an RCU read-side critical
+	section.  Note that RCU read-side critical sections may be nested
+	and/or overlapping.
 
 synchronize_rcu()
 ^^^^^^^^^^^^^^^^^
 	void synchronize_rcu(void);
 
-	Marks the end of updater code and the beginning of reclaimer
-	code.  It does this by blocking until all pre-existing RCU
-	read-side critical sections on all CPUs have completed.
-	Note that synchronize_rcu() will **not** necessarily wait for
-	any subsequent RCU read-side critical sections to complete.
-	For example, consider the following sequence of events::
+	This temporal primitive marks the end of updater code and the
+	beginning of reclaimer code.  It does this by blocking until
+	all pre-existing RCU read-side critical sections on all CPUs
+	have completed.  Note that synchronize_rcu() will **not**
+	necessarily wait for any subsequent RCU read-side critical
+	sections to complete.  For example, consider the following
+	sequence of events::
 
 	         CPU 0                  CPU 1                 CPU 2
 	     ----------------- ------------------------- ---------------
@@ -207,13 +218,13 @@ synchronize_rcu()
 	to be useful in all but the most read-intensive situations,
 	synchronize_rcu()'s overhead must also be quite small.
 
-	The call_rcu() API is a callback form of synchronize_rcu(),
-	and is described in more detail in a later section.  Instead of
-	blocking, it registers a function and argument which are invoked
-	after all ongoing RCU read-side critical sections have completed.
-	This callback variant is particularly useful in situations where
-	it is illegal to block or where update-side performance is
-	critically important.
+	The call_rcu() API is an asynchronous callback form of
+	synchronize_rcu(), and is described in more detail in a later
+	section.  Instead of blocking, it registers a function and
+	argument which are invoked after all ongoing RCU read-side
+	critical sections have completed.  This callback variant is
+	particularly useful in situations where it is illegal to block
+	or where update-side performance is critically important.
 
 	However, the call_rcu() API should not be used lightly, as use
 	of the synchronize_rcu() API generally results in simpler code.
@@ -222,7 +233,7 @@ synchronize_rcu()
 	be delayed.  This property results in system resilience in face
 	of denial-of-service attacks.  Code using call_rcu() should limit
 	update rate in order to gain this same sort of resilience.  See
-	checklist.txt for some approaches to limiting the update rate.
+	checklist.rst for some approaches to limiting the update rate.
 
 rcu_assign_pointer()
 ^^^^^^^^^^^^^^^^^^^^
@@ -232,11 +243,13 @@ rcu_assign_pointer()
 	would be cool to be able to declare a function in this manner.
 	(Compiler experts will no doubt disagree.)
 
-	The updater uses this function to assign a new value to an
+	The updater uses this spatial macro to assign a new value to an
 	RCU-protected pointer, in order to safely communicate the change
-	in value from the updater to the reader.  This macro does not
-	evaluate to an rvalue, but it does execute any memory-barrier
-	instructions required for a given CPU architecture.
+	in value from the updater to the reader.  This is a spatial (as
+	opposed to temporal) macro.  It does not evaluate to an rvalue,
+	but it does execute any memory-barrier instructions required
+	for a given CPU architecture.  Its ordering properties are that
+	of a store-release operation.
 
 	Perhaps just as important, it serves to document (1) which
 	pointers are protected by RCU and (2) the point at which a
@@ -251,14 +264,15 @@ rcu_dereference()
 	Like rcu_assign_pointer(), rcu_dereference() must be implemented
 	as a macro.
 
-	The reader uses rcu_dereference() to fetch an RCU-protected
-	pointer, which returns a value that may then be safely
-	dereferenced.  Note that rcu_dereference() does not actually
-	dereference the pointer, instead, it protects the pointer for
-	later dereferencing.  It also executes any needed memory-barrier
-	instructions for a given CPU architecture.  Currently, only Alpha
-	needs memory barriers within rcu_dereference() -- on other CPUs,
-	it compiles to nothing, not even a compiler directive.
+	The reader uses the spatial rcu_dereference() macro to fetch
+	an RCU-protected pointer, which returns a value that may
+	then be safely dereferenced.  Note that rcu_dereference()
+	does not actually dereference the pointer, instead, it
+	protects the pointer for later dereferencing.  It also
+	executes any needed memory-barrier instructions for a given
+	CPU architecture.  Currently, only Alpha needs memory barriers
+	within rcu_dereference() -- on other CPUs, it compiles to a
+	volatile load.
 
 	Common coding practice uses rcu_dereference() to copy an
 	RCU-protected pointer to a local variable, then dereferences
@@ -316,7 +330,7 @@ rcu_dereference()
 	must prohibit.	The rcu_dereference_protected() variant takes
 	a lockdep expression to indicate which locks must be acquired
 	by the caller. If the indicated protection is not provided,
-	a lockdep splat is emitted.  See Documentation/RCU/Design/Requirements/Requirements.rst
+	a lockdep splat is emitted.  See Design/Requirements/Requirements.rst
 	and the API's code comments for more details and example usage.
 
 .. 	[2] If the list_for_each_entry_rcu() instance might be used by
@@ -351,12 +365,15 @@ reader, updater, and reclaimer.
 	      synchronize_rcu() & call_rcu()
 
 
-The RCU infrastructure observes the time sequence of rcu_read_lock(),
+The RCU infrastructure observes the temporal sequence of rcu_read_lock(),
 rcu_read_unlock(), synchronize_rcu(), and call_rcu() invocations in
 order to determine when (1) synchronize_rcu() invocations may return
 to their callers and (2) call_rcu() callbacks may be invoked.  Efficient
 implementations of the RCU infrastructure make heavy use of batching in
 order to amortize their overhead over many uses of the corresponding APIs.
+The rcu_assign_pointer() and rcu_dereference() invocations communicate
+spatial changes via stores to and loads from the RCU-protected pointer in
+question.
 
 There are at least three flavors of RCU usage in the Linux kernel. The diagram
 above shows the most common one. On the updater side, the rcu_assign_pointer(),
@@ -388,7 +405,9 @@ b.	RCU applied to networking data structures that may be subjected
 c.	RCU applied to scheduler and interrupt/NMI-handler tasks.
 
 Again, most uses will be of (a).  The (b) and (c) cases are important
-for specialized uses, but are relatively uncommon.
+for specialized uses, but are relatively uncommon.  The SRCU, RCU-Tasks,
+RCU-Tasks-Rude, and RCU-Tasks-Trace have similar relationships among
+their assorted primitives.
 
 .. _3_whatisRCU:
 
@@ -397,8 +416,7 @@ for specialized uses, but are relatively uncommon.
 
 This section shows a simple use of the core RCU API to protect a
 global pointer to a dynamically allocated structure.  More-typical
-uses of RCU may be found in :ref:`listRCU.rst <list_rcu_doc>`,
-:ref:`arrayRCU.rst <array_rcu_doc>`, and :ref:`NMI-RCU.rst <NMI_rcu_doc>`.
+uses of RCU may be found in listRCU.rst, arrayRCU.rst, and NMI-RCU.rst.
 ::
 
 	struct foo {
@@ -465,7 +483,7 @@ So, to sum up:
 -	Within an RCU read-side critical section, use rcu_dereference()
 	to dereference RCU-protected pointers.
 
--	Use some solid scheme (such as locks or semaphores) to
+-	Use some solid design (such as locks or semaphores) to
 	keep concurrent updates from interfering with each other.
 
 -	Use rcu_assign_pointer() to update an RCU-protected pointer.
@@ -480,10 +498,9 @@ So, to sum up:
 	RCU read-side critical sections that might be referencing that
 	data item.
 
-See checklist.txt for additional rules to follow when using RCU.
-And again, more-typical uses of RCU may be found in :ref:`listRCU.rst
-<list_rcu_doc>`, :ref:`arrayRCU.rst <array_rcu_doc>`, and :ref:`NMI-RCU.rst
-<NMI_rcu_doc>`.
+See checklist.rst for additional rules to follow when using RCU.
+And again, more-typical uses of RCU may be found in listRCU.rst,
+arrayRCU.rst, and NMI-RCU.rst.
 
 .. _4_whatisRCU:
 
@@ -577,7 +594,15 @@ to avoid having to write your own callback::
 
 	kfree_rcu(old_fp, rcu);
 
-Again, see checklist.txt for additional rules governing the use of RCU.
+If the occasional sleep is permitted, the single-argument form may
+be used, omitting the rcu_head structure from struct foo.
+
+	kfree_rcu_mightsleep(old_fp);
+
+This variant almost never blocks, but might do so by invoking
+synchronize_rcu() in response to memory-allocation failure.
+
+Again, see checklist.rst for additional rules governing the use of RCU.
 
 .. _5_whatisRCU:
 
@@ -594,7 +619,7 @@ lacking both functionality and performance.  However, they are useful
 in getting a feel for how RCU works.  See kernel/rcu/update.c for a
 production-quality implementation, and see:
 
-	http://www.rdrop.com/users/paulmck/RCU
+	https://docs.google.com/document/d/1X0lThx8OK0ZgLMqVoXiR4ZrGURHrXK6NyLRbeXe3Xac/edit
 
 for papers describing the Linux kernel RCU implementation.  The OLS'01
 and OLS'02 papers are a good introduction, and the dissertation provides
@@ -661,7 +686,7 @@ been able to write-acquire the lock otherwise.  The smp_mb__after_spinlock()
 promotes synchronize_rcu() to a full memory barrier in compliance with
 the "Memory-Barrier Guarantees" listed in:
 
-	Documentation/RCU/Design/Requirements/Requirements.rst
+	Design/Requirements/Requirements.rst
 
 It is possible to nest rcu_read_lock(), since reader-writer locks may
 be recursively acquired.  Note also that rcu_read_lock() is immune
@@ -677,7 +702,7 @@ Quick Quiz #1:
 		occur when using this algorithm in a real-world Linux
 		kernel?  How could this deadlock be avoided?
 
-:ref:`Answers to Quick Quiz <8_whatisRCU>`
+:ref:`Answers to Quick Quiz <9_whatisRCU>`
 
 5B.  "TOY" EXAMPLE #2: CLASSIC RCU
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -732,7 +757,7 @@ Quick Quiz #2:
 		Give an example where Classic RCU's read-side
 		overhead is **negative**.
 
-:ref:`Answers to Quick Quiz <8_whatisRCU>`
+:ref:`Answers to Quick Quiz <9_whatisRCU>`
 
 .. _quiz_3:
 
@@ -741,7 +766,7 @@ Quick Quiz #3:
 		critical section, what the heck do you do in
 		CONFIG_PREEMPT_RT, where normal spinlocks can block???
 
-:ref:`Answers to Quick Quiz <8_whatisRCU>`
+:ref:`Answers to Quick Quiz <9_whatisRCU>`
 
 .. _6_whatisRCU:
 
@@ -872,7 +897,86 @@ be used in place of synchronize_rcu().
 
 .. _7_whatisRCU:
 
-7.  FULL LIST OF RCU APIs
+7.  ANALOGY WITH REFERENCE COUNTING
+-----------------------------------
+
+The reader-writer analogy (illustrated by the previous section) is not
+always the best way to think about using RCU.  Another helpful analogy
+considers RCU an effective reference count on everything which is
+protected by RCU.
+
+A reference count typically does not prevent the referenced object's
+values from changing, but does prevent changes to type -- particularly the
+gross change of type that happens when that object's memory is freed and
+re-allocated for some other purpose.  Once a type-safe reference to the
+object is obtained, some other mechanism is needed to ensure consistent
+access to the data in the object.  This could involve taking a spinlock,
+but with RCU the typical approach is to perform reads with SMP-aware
+operations such as smp_load_acquire(), to perform updates with atomic
+read-modify-write operations, and to provide the necessary ordering.
+RCU provides a number of support functions that embed the required
+operations and ordering, such as the list_for_each_entry_rcu() macro
+used in the previous section.
+
+A more focused view of the reference counting behavior is that,
+between rcu_read_lock() and rcu_read_unlock(), any reference taken with
+rcu_dereference() on a pointer marked as ``__rcu`` can be treated as
+though a reference-count on that object has been temporarily increased.
+This prevents the object from changing type.  Exactly what this means
+will depend on normal expectations of objects of that type, but it
+typically includes that spinlocks can still be safely locked, normal
+reference counters can be safely manipulated, and ``__rcu`` pointers
+can be safely dereferenced.
+
+Some operations that one might expect to see on an object for
+which an RCU reference is held include:
+
+ - Copying out data that is guaranteed to be stable by the object's type.
+ - Using kref_get_unless_zero() or similar to get a longer-term
+   reference.  This may fail of course.
+ - Acquiring a spinlock in the object, and checking if the object still
+   is the expected object and if so, manipulating it freely.
+
+The understanding that RCU provides a reference that only prevents a
+change of type is particularly visible with objects allocated from a
+slab cache marked ``SLAB_TYPESAFE_BY_RCU``.  RCU operations may yield a
+reference to an object from such a cache that has been concurrently freed
+and the memory reallocated to a completely different object, though of
+the same type.  In this case RCU doesn't even protect the identity of the
+object from changing, only its type.  So the object found may not be the
+one expected, but it will be one where it is safe to take a reference
+(and then potentially acquiring a spinlock), allowing subsequent code
+to check whether the identity matches expectations.  It is tempting
+to simply acquire the spinlock without first taking the reference, but
+unfortunately any spinlock in a ``SLAB_TYPESAFE_BY_RCU`` object must be
+initialized after each and every call to kmem_cache_alloc(), which renders
+reference-free spinlock acquisition completely unsafe.  Therefore, when
+using ``SLAB_TYPESAFE_BY_RCU``, make proper use of a reference counter.
+(Those willing to use a kmem_cache constructor may also use locking,
+including cache-friendly sequence locking.)
+
+With traditional reference counting -- such as that implemented by the
+kref library in Linux -- there is typically code that runs when the last
+reference to an object is dropped.  With kref, this is the function
+passed to kref_put().  When RCU is being used, such finalization code
+must not be run until all ``__rcu`` pointers referencing the object have
+been updated, and then a grace period has passed.  Every remaining
+globally visible pointer to the object must be considered to be a
+potential counted reference, and the finalization code is typically run
+using call_rcu() only after all those pointers have been changed.
+
+To see how to choose between these two analogies -- of RCU as a
+reader-writer lock and RCU as a reference counting system -- it is useful
+to reflect on the scale of the thing being protected.  The reader-writer
+lock analogy looks at larger multi-part objects such as a linked list
+and shows how RCU can facilitate concurrency while elements are added
+to, and removed from, the list.  The reference-count analogy looks at
+the individual objects and looks at how they can be accessed safely
+within whatever whole they are a part of.
+
+.. _8_whatisRCU:
+
+8.  FULL LIST OF RCU APIs
 -------------------------
 
 The RCU APIs are documented in docbook-format header comments in the
@@ -968,6 +1072,30 @@ sched::
 	rcu_read_lock_sched_held
 
 
+RCU-Tasks::
+
+	Critical sections	Grace period		Barrier
+
+	N/A			call_rcu_tasks		rcu_barrier_tasks
+				synchronize_rcu_tasks
+
+
+RCU-Tasks-Rude::
+
+	Critical sections	Grace period		Barrier
+
+	N/A			call_rcu_tasks_rude	rcu_barrier_tasks_rude
+				synchronize_rcu_tasks_rude
+
+
+RCU-Tasks-Trace::
+
+	Critical sections	Grace period		Barrier
+
+	rcu_read_lock_trace	call_rcu_tasks_trace	rcu_barrier_tasks_trace
+	rcu_read_unlock_trace	synchronize_rcu_tasks_trace
+
+
 SRCU::
 
 	Critical sections	Grace period		Barrier
@@ -985,14 +1113,20 @@ SRCU: Initialization/cleanup::
 	init_srcu_struct
 	cleanup_srcu_struct
 
-All: lockdep-checked RCU-protected pointer access::
+All: lockdep-checked RCU utility APIs::
 
-	rcu_access_pointer
-	rcu_dereference_raw
 	RCU_LOCKDEP_WARN
 	rcu_sleep_check
 	RCU_NONIDLE
 
+All: Unchecked RCU-protected pointer access::
+
+	rcu_dereference_raw
+
+All: Unchecked RCU-protected pointer access with dereferencing prohibited::
+
+	rcu_access_pointer
+
 See the comment headers in the source code (or the docbook generated
 from them) for more information.
 
@@ -1002,42 +1136,50 @@ list can be helpful:
 
 a.	Will readers need to block?  If so, you need SRCU.
 
-b.	What about the -rt patchset?  If readers would need to block
-	in an non-rt kernel, you need SRCU.  If readers would block
-	in a -rt kernel, but not in a non-rt kernel, SRCU is not
-	necessary.  (The -rt patchset turns spinlocks into sleeplocks,
-	hence this distinction.)
+b.	Will readers need to block and are you doing tracing, for
+	example, ftrace or BPF?  If so, you need RCU-tasks,
+	RCU-tasks-rude, and/or RCU-tasks-trace.
 
-c.	Do you need to treat NMI handlers, hardirq handlers,
+c.	What about the -rt patchset?  If readers would need to block in
+	an non-rt kernel, you need SRCU.  If readers would block when
+	acquiring spinlocks in a -rt kernel, but not in a non-rt kernel,
+	SRCU is not necessary.	(The -rt patchset turns spinlocks into
+	sleeplocks, hence this distinction.)
+
+d.	Do you need to treat NMI handlers, hardirq handlers,
 	and code segments with preemption disabled (whether
 	via preempt_disable(), local_irq_save(), local_bh_disable(),
 	or some other mechanism) as if they were explicit RCU readers?
-	If so, RCU-sched is the only choice that will work for you.
-
-d.	Do you need RCU grace periods to complete even in the face
-	of softirq monopolization of one or more of the CPUs?  For
-	example, is your code subject to network-based denial-of-service
-	attacks?  If so, you should disable softirq across your readers,
-	for example, by using rcu_read_lock_bh().
-
-e.	Is your workload too update-intensive for normal use of
+	If so, RCU-sched readers are the only choice that will work
+	for you, but since about v4.20 you use can use the vanilla RCU
+	update primitives.
+
+e.	Do you need RCU grace periods to complete even in the face of
+	softirq monopolization of one or more of the CPUs?  For example,
+	is your code subject to network-based denial-of-service attacks?
+	If so, you should disable softirq across your readers, for
+	example, by using rcu_read_lock_bh().  Since about v4.20 you
+	use can use the vanilla RCU update primitives.
+
+f.	Is your workload too update-intensive for normal use of
 	RCU, but inappropriate for other synchronization mechanisms?
 	If so, consider SLAB_TYPESAFE_BY_RCU (which was originally
 	named SLAB_DESTROY_BY_RCU).  But please be careful!
 
-f.	Do you need read-side critical sections that are respected
-	even though they are in the middle of the idle loop, during
-	user-mode execution, or on an offlined CPU?  If so, SRCU is the
-	only choice that will work for you.
+g.	Do you need read-side critical sections that are respected even
+	on CPUs that are deep in the idle loop, during entry to or exit
+	from user-mode execution, or on an offlined CPU?  If so, SRCU
+	and RCU Tasks Trace are the only choices that will work for you,
+	with SRCU being strongly preferred in almost all cases.
 
-g.	Otherwise, use RCU.
+h.	Otherwise, use RCU.
 
 Of course, this all assumes that you have determined that RCU is in fact
 the right tool for your job.
 
-.. _8_whatisRCU:
+.. _9_whatisRCU:
 
-8.  ANSWERS TO QUICK QUIZZES
+9.  ANSWERS TO QUICK QUIZZES
 ----------------------------
 
 Quick Quiz #1:
diff --git a/Documentation/accel/index.rst b/Documentation/accel/index.rst
new file mode 100644
index 000000000000..e94a0160b6a0
--- /dev/null
+++ b/Documentation/accel/index.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================
+Compute Accelerators
+====================
+
+.. toctree::
+   :maxdepth: 1
+
+   introduction
+   qaic/index
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/accel/introduction.rst b/Documentation/accel/introduction.rst
new file mode 100644
index 000000000000..89984dfececf
--- /dev/null
+++ b/Documentation/accel/introduction.rst
@@ -0,0 +1,110 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============
+Introduction
+============
+
+The Linux compute accelerators subsystem is designed to expose compute
+accelerators in a common way to user-space and provide a common set of
+functionality.
+
+These devices can be either stand-alone ASICs or IP blocks inside an SoC/GPU.
+Although these devices are typically designed to accelerate
+Machine-Learning (ML) and/or Deep-Learning (DL) computations, the accel layer
+is not limited to handling these types of accelerators.
+
+Typically, a compute accelerator will belong to one of the following
+categories:
+
+- Edge AI - doing inference at an edge device. It can be an embedded ASIC/FPGA,
+  or an IP inside a SoC (e.g. laptop web camera). These devices
+  are typically configured using registers and can work with or without DMA.
+
+- Inference data-center - single/multi user devices in a large server. This
+  type of device can be stand-alone or an IP inside a SoC or a GPU. It will
+  have on-board DRAM (to hold the DL topology), DMA engines and
+  command submission queues (either kernel or user-space queues).
+  It might also have an MMU to manage multiple users and might also enable
+  virtualization (SR-IOV) to support multiple VMs on the same device. In
+  addition, these devices will usually have some tools, such as profiler and
+  debugger.
+
+- Training data-center - Similar to Inference data-center cards, but typically
+  have more computational power and memory b/w (e.g. HBM) and will likely have
+  a method of scaling-up/out, i.e. connecting to other training cards inside
+  the server or in other servers, respectively.
+
+All these devices typically have different runtime user-space software stacks,
+that are tailored-made to their h/w. In addition, they will also probably
+include a compiler to generate programs to their custom-made computational
+engines. Typically, the common layer in user-space will be the DL frameworks,
+such as PyTorch and TensorFlow.
+
+Sharing code with DRM
+=====================
+
+Because this type of devices can be an IP inside GPUs or have similar
+characteristics as those of GPUs, the accel subsystem will use the
+DRM subsystem's code and functionality. i.e. the accel core code will
+be part of the DRM subsystem and an accel device will be a new type of DRM
+device.
+
+This will allow us to leverage the extensive DRM code-base and
+collaborate with DRM developers that have experience with this type of
+devices. In addition, new features that will be added for the accelerator
+drivers can be of use to GPU drivers as well.
+
+Differentiation from GPUs
+=========================
+
+Because we want to prevent the extensive user-space graphic software stack
+from trying to use an accelerator as a GPU, the compute accelerators will be
+differentiated from GPUs by using a new major number and new device char files.
+
+Furthermore, the drivers will be located in a separate place in the kernel
+tree - drivers/accel/.
+
+The accelerator devices will be exposed to the user space with the dedicated
+261 major number and will have the following convention:
+
+- device char files - /dev/accel/accel\*
+- sysfs             - /sys/class/accel/accel\*/
+- debugfs           - /sys/kernel/debug/accel/\*/
+
+Getting Started
+===============
+
+First, read the DRM documentation at Documentation/gpu/index.rst.
+Not only it will explain how to write a new DRM driver but it will also
+contain all the information on how to contribute, the Code Of Conduct and
+what is the coding style/documentation. All of that is the same for the
+accel subsystem.
+
+Second, make sure the kernel is configured with CONFIG_DRM_ACCEL.
+
+To expose your device as an accelerator, two changes are needed to
+be done in your driver (as opposed to a standard DRM driver):
+
+- Add the DRIVER_COMPUTE_ACCEL feature flag in your drm_driver's
+  driver_features field. It is important to note that this driver feature is
+  mutually exclusive with DRIVER_RENDER and DRIVER_MODESET. Devices that want
+  to expose both graphics and compute device char files should be handled by
+  two drivers that are connected using the auxiliary bus framework.
+
+- Change the open callback in your driver fops structure to accel_open().
+  Alternatively, your driver can use DEFINE_DRM_ACCEL_FOPS macro to easily
+  set the correct function operations pointers structure.
+
+External References
+===================
+
+email threads
+-------------
+
+* `Initial discussion on the New subsystem for acceleration devices <https://lkml.org/lkml/2022/7/31/83>`_ - Oded Gabbay (2022)
+* `patch-set to add the new subsystem <https://lkml.org/lkml/2022/10/22/544>`_ - Oded Gabbay (2022)
+
+Conference talks
+----------------
+
+* `LPC 2022 Accelerators BOF outcomes summary <https://airlied.blogspot.com/2022/09/accelerators-bof-outcomes-summary.html>`_ - Dave Airlie (2022)
diff --git a/Documentation/accel/qaic/aic100.rst b/Documentation/accel/qaic/aic100.rst
new file mode 100644
index 000000000000..c80d0f1307db
--- /dev/null
+++ b/Documentation/accel/qaic/aic100.rst
@@ -0,0 +1,510 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+===============================
+ Qualcomm Cloud AI 100 (AIC100)
+===============================
+
+Overview
+========
+
+The Qualcomm Cloud AI 100/AIC100 family of products (including SA9000P - part of
+Snapdragon Ride) are PCIe adapter cards which contain a dedicated SoC ASIC for
+the purpose of efficiently running Artificial Intelligence (AI) Deep Learning
+inference workloads. They are AI accelerators.
+
+The PCIe interface of AIC100 is capable of PCIe Gen4 speeds over eight lanes
+(x8). An individual SoC on a card can have up to 16 NSPs for running workloads.
+Each SoC has an A53 management CPU. On card, there can be up to 32 GB of DDR.
+
+Multiple AIC100 cards can be hosted in a single system to scale overall
+performance. AIC100 cards are multi-user capable and able to execute workloads
+from multiple users in a concurrent manner.
+
+Hardware Description
+====================
+
+An AIC100 card consists of an AIC100 SoC, on-card DDR, and a set of misc
+peripherals (PMICs, etc).
+
+An AIC100 card can either be a PCIe HHHL form factor (a traditional PCIe card),
+or a Dual M.2 card. Both use PCIe to connect to the host system.
+
+As a PCIe endpoint/adapter, AIC100 uses the standard VendorID(VID)/
+DeviceID(DID) combination to uniquely identify itself to the host. AIC100
+uses the standard Qualcomm VID (0x17cb). All AIC100 SKUs use the same
+AIC100 DID (0xa100).
+
+AIC100 does not implement FLR (function level reset).
+
+AIC100 implements MSI but does not implement MSI-X. AIC100 requires 17 MSIs to
+operate (1 for MHI, 16 for the DMA Bridge).
+
+As a PCIe device, AIC100 utilizes BARs to provide host interfaces to the device
+hardware. AIC100 provides 3, 64-bit BARs.
+
+* The first BAR is 4K in size, and exposes the MHI interface to the host.
+
+* The second BAR is 2M in size, and exposes the DMA Bridge interface to the
+  host.
+
+* The third BAR is variable in size based on an individual AIC100's
+  configuration, but defaults to 64K. This BAR currently has no purpose.
+
+From the host perspective, AIC100 has several key hardware components -
+
+* MHI (Modem Host Interface)
+* QSM (QAIC Service Manager)
+* NSPs (Neural Signal Processor)
+* DMA Bridge
+* DDR
+
+MHI
+---
+
+AIC100 has one MHI interface over PCIe. MHI itself is documented at
+Documentation/mhi/index.rst MHI is the mechanism the host uses to communicate
+with the QSM. Except for workload data via the DMA Bridge, all interaction with
+the device occurs via MHI.
+
+QSM
+---
+
+QAIC Service Manager. This is an ARM A53 CPU that runs the primary
+firmware of the card and performs on-card management tasks. It also
+communicates with the host via MHI. Each AIC100 has one of
+these.
+
+NSP
+---
+
+Neural Signal Processor. Each AIC100 has up to 16 of these. These are
+the processors that run the workloads on AIC100. Each NSP is a Qualcomm Hexagon
+(Q6) DSP with HVX and HMX. Each NSP can only run one workload at a time, but
+multiple NSPs may be assigned to a single workload. Since each NSP can only run
+one workload, AIC100 is limited to 16 concurrent workloads. Workload
+"scheduling" is under the purview of the host. AIC100 does not automatically
+timeslice.
+
+DMA Bridge
+----------
+
+The DMA Bridge is custom DMA engine that manages the flow of data
+in and out of workloads. AIC100 has one of these. The DMA Bridge has 16
+channels, each consisting of a set of request/response FIFOs. Each active
+workload is assigned a single DMA Bridge channel. The DMA Bridge exposes
+hardware registers to manage the FIFOs (head/tail pointers), but requires host
+memory to store the FIFOs.
+
+DDR
+---
+
+AIC100 has on-card DDR. In total, an AIC100 can have up to 32 GB of DDR.
+This DDR is used to store workloads, data for the workloads, and is used by the
+QSM for managing the device. NSPs are granted access to sections of the DDR by
+the QSM. The host does not have direct access to the DDR, and must make
+requests to the QSM to transfer data to the DDR.
+
+High-level Use Flow
+===================
+
+AIC100 is a multi-user, programmable accelerator typically used for running
+neural networks in inferencing mode to efficiently perform AI operations.
+AIC100 is not intended for training neural networks. AIC100 can be utilized
+for generic compute workloads.
+
+Assuming a user wants to utilize AIC100, they would follow these steps:
+
+1. Compile the workload into an ELF targeting the NSP(s)
+2. Make requests to the QSM to load the workload and related artifacts into the
+   device DDR
+3. Make a request to the QSM to activate the workload onto a set of idle NSPs
+4. Make requests to the DMA Bridge to send input data to the workload to be
+   processed, and other requests to receive processed output data from the
+   workload.
+5. Once the workload is no longer required, make a request to the QSM to
+   deactivate the workload, thus putting the NSPs back into an idle state.
+6. Once the workload and related artifacts are no longer needed for future
+   sessions, make requests to the QSM to unload the data from DDR. This frees
+   the DDR to be used by other users.
+
+
+Boot Flow
+=========
+
+AIC100 uses a flashless boot flow, derived from Qualcomm MSMs.
+
+When AIC100 is first powered on, it begins executing PBL (Primary Bootloader)
+from ROM. PBL enumerates the PCIe link, and initializes the BHI (Boot Host
+Interface) component of MHI.
+
+Using BHI, the host points PBL to the location of the SBL (Secondary Bootloader)
+image. The PBL pulls the image from the host, validates it, and begins
+execution of SBL.
+
+SBL initializes MHI, and uses MHI to notify the host that the device has entered
+the SBL stage. SBL performs a number of operations:
+
+* SBL initializes the majority of hardware (anything PBL left uninitialized),
+  including DDR.
+* SBL offloads the bootlog to the host.
+* SBL synchronizes timestamps with the host for future logging.
+* SBL uses the Sahara protocol to obtain the runtime firmware images from the
+  host.
+
+Once SBL has obtained and validated the runtime firmware, it brings the NSPs out
+of reset, and jumps into the QSM.
+
+The QSM uses MHI to notify the host that the device has entered the QSM stage
+(AMSS in MHI terms). At this point, the AIC100 device is fully functional, and
+ready to process workloads.
+
+Userspace components
+====================
+
+Compiler
+--------
+
+An open compiler for AIC100 based on upstream LLVM can be found at:
+https://github.com/quic/software-kit-for-qualcomm-cloud-ai-100-cc
+
+Usermode Driver (UMD)
+---------------------
+
+An open UMD that interfaces with the qaic kernel driver can be found at:
+https://github.com/quic/software-kit-for-qualcomm-cloud-ai-100
+
+Sahara loader
+-------------
+
+An open implementation of the Sahara protocol called kickstart can be found at:
+https://github.com/andersson/qdl
+
+MHI Channels
+============
+
+AIC100 defines a number of MHI channels for different purposes. This is a list
+of the defined channels, and their uses.
+
++----------------+---------+----------+----------------------------------------+
+| Channel name   | IDs     | EEs      | Purpose                                |
++================+=========+==========+========================================+
+| QAIC_LOOPBACK  | 0 & 1   | AMSS     | Any data sent to the device on this    |
+|                |         |          | channel is sent back to the host.      |
++----------------+---------+----------+----------------------------------------+
+| QAIC_SAHARA    | 2 & 3   | SBL      | Used by SBL to obtain the runtime      |
+|                |         |          | firmware from the host.                |
++----------------+---------+----------+----------------------------------------+
+| QAIC_DIAG      | 4 & 5   | AMSS     | Used to communicate with QSM via the   |
+|                |         |          | DIAG protocol.                         |
++----------------+---------+----------+----------------------------------------+
+| QAIC_SSR       | 6 & 7   | AMSS     | Used to notify the host of subsystem   |
+|                |         |          | restart events, and to offload SSR     |
+|                |         |          | crashdumps.                            |
++----------------+---------+----------+----------------------------------------+
+| QAIC_QDSS      | 8 & 9   | AMSS     | Used for the Qualcomm Debug Subsystem. |
++----------------+---------+----------+----------------------------------------+
+| QAIC_CONTROL   | 10 & 11 | AMSS     | Used for the Neural Network Control    |
+|                |         |          | (NNC) protocol. This is the primary    |
+|                |         |          | channel between host and QSM for       |
+|                |         |          | managing workloads.                    |
++----------------+---------+----------+----------------------------------------+
+| QAIC_LOGGING   | 12 & 13 | SBL      | Used by the SBL to send the bootlog to |
+|                |         |          | the host.                              |
++----------------+---------+----------+----------------------------------------+
+| QAIC_STATUS    | 14 & 15 | AMSS     | Used to notify the host of Reliability,|
+|                |         |          | Accessibility, Serviceability (RAS)    |
+|                |         |          | events.                                |
++----------------+---------+----------+----------------------------------------+
+| QAIC_TELEMETRY | 16 & 17 | AMSS     | Used to get/set power/thermal/etc      |
+|                |         |          | attributes.                            |
++----------------+---------+----------+----------------------------------------+
+| QAIC_DEBUG     | 18 & 19 | AMSS     | Not used.                              |
++----------------+---------+----------+----------------------------------------+
+| QAIC_TIMESYNC  | 20 & 21 | SBL/AMSS | Used to synchronize timestamps in the  |
+|                |         |          | device side logs with the host time    |
+|                |         |          | source.                                |
++----------------+---------+----------+----------------------------------------+
+
+DMA Bridge
+==========
+
+Overview
+--------
+
+The DMA Bridge is one of the main interfaces to the host from the device
+(the other being MHI). As part of activating a workload to run on NSPs, the QSM
+assigns that network a DMA Bridge channel. A workload's DMA Bridge channel
+(DBC for short) is solely for the use of that workload and is not shared with
+other workloads.
+
+Each DBC is a pair of FIFOs that manage data in and out of the workload. One
+FIFO is the request FIFO. The other FIFO is the response FIFO.
+
+Each DBC contains 4 registers in hardware:
+
+* Request FIFO head pointer (offset 0x0). Read only by the host. Indicates the
+  latest item in the FIFO the device has consumed.
+* Request FIFO tail pointer (offset 0x4). Read/write by the host. Host
+  increments this register to add new items to the FIFO.
+* Response FIFO head pointer (offset 0x8). Read/write by the host. Indicates
+  the latest item in the FIFO the host has consumed.
+* Response FIFO tail pointer (offset 0xc). Read only by the host. Device
+  increments this register to add new items to the FIFO.
+
+The values in each register are indexes in the FIFO. To get the location of the
+FIFO element pointed to by the register: FIFO base address + register * element
+size.
+
+DBC registers are exposed to the host via the second BAR. Each DBC consumes
+4KB of space in the BAR.
+
+The actual FIFOs are backed by host memory. When sending a request to the QSM
+to activate a network, the host must donate memory to be used for the FIFOs.
+Due to internal mapping limitations of the device, a single contiguous chunk of
+memory must be provided per DBC, which hosts both FIFOs. The request FIFO will
+consume the beginning of the memory chunk, and the response FIFO will consume
+the end of the memory chunk.
+
+Request FIFO
+------------
+
+A request FIFO element has the following structure:
+
+.. code-block:: c
+
+  struct request_elem {
+	u16 req_id;
+	u8  seq_id;
+	u8  pcie_dma_cmd;
+	u32 reserved;
+	u64 pcie_dma_source_addr;
+	u64 pcie_dma_dest_addr;
+	u32 pcie_dma_len;
+	u32 reserved;
+	u64 doorbell_addr;
+	u8  doorbell_attr;
+	u8  reserved;
+	u16 reserved;
+	u32 doorbell_data;
+	u32 sem_cmd0;
+	u32 sem_cmd1;
+	u32 sem_cmd2;
+	u32 sem_cmd3;
+  };
+
+Request field descriptions:
+
+req_id
+	request ID. A request FIFO element and a response FIFO element with
+	the same request ID refer to the same command.
+
+seq_id
+	sequence ID within a request. Ignored by the DMA Bridge.
+
+pcie_dma_cmd
+	describes the DMA element of this request.
+
+	* Bit(7) is the force msi flag, which overrides the DMA Bridge MSI logic
+	  and generates a MSI when this request is complete, and QSM
+	  configures the DMA Bridge to look at this bit.
+	* Bits(6:5) are reserved.
+	* Bit(4) is the completion code flag, and indicates that the DMA Bridge
+	  shall generate a response FIFO element when this request is
+	  complete.
+	* Bit(3) indicates if this request is a linked list transfer(0) or a bulk
+	  transfer(1).
+	* Bit(2) is reserved.
+	* Bits(1:0) indicate the type of transfer. No transfer(0), to device(1),
+	  from device(2). Value 3 is illegal.
+
+pcie_dma_source_addr
+	source address for a bulk transfer, or the address of the linked list.
+
+pcie_dma_dest_addr
+	destination address for a bulk transfer.
+
+pcie_dma_len
+	length of the bulk transfer. Note that the size of this field
+	limits transfers to 4G in size.
+
+doorbell_addr
+	address of the doorbell to ring when this request is complete.
+
+doorbell_attr
+	doorbell attributes.
+
+	* Bit(7) indicates if a write to a doorbell is to occur.
+	* Bits(6:2) are reserved.
+	* Bits(1:0) contain the encoding of the doorbell length. 0 is 32-bit,
+	  1 is 16-bit, 2 is 8-bit, 3 is reserved. The doorbell address
+	  must be naturally aligned to the specified length.
+
+doorbell_data
+	data to write to the doorbell. Only the bits corresponding to
+	the doorbell length are valid.
+
+sem_cmdN
+	semaphore command.
+
+	* Bit(31) indicates this semaphore command is enabled.
+	* Bit(30) is the to-device DMA fence. Block this request until all
+	  to-device DMA transfers are complete.
+	* Bit(29) is the from-device DMA fence. Block this request until all
+	  from-device DMA transfers are complete.
+	* Bits(28:27) are reserved.
+	* Bits(26:24) are the semaphore command. 0 is NOP. 1 is init with the
+	  specified value. 2 is increment. 3 is decrement. 4 is wait
+	  until the semaphore is equal to the specified value. 5 is wait
+	  until the semaphore is greater or equal to the specified value.
+	  6 is "P", wait until semaphore is greater than 0, then
+	  decrement by 1. 7 is reserved.
+	* Bit(23) is reserved.
+	* Bit(22) is the semaphore sync. 0 is post sync, which means that the
+	  semaphore operation is done after the DMA transfer. 1 is
+	  presync, which gates the DMA transfer. Only one presync is
+	  allowed per request.
+	* Bit(21) is reserved.
+	* Bits(20:16) is the index of the semaphore to operate on.
+	* Bits(15:12) are reserved.
+	* Bits(11:0) are the semaphore value to use in operations.
+
+Overall, a request is processed in 4 steps:
+
+1. If specified, the presync semaphore condition must be true
+2. If enabled, the DMA transfer occurs
+3. If specified, the postsync semaphore conditions must be true
+4. If enabled, the doorbell is written
+
+By using the semaphores in conjunction with the workload running on the NSPs,
+the data pipeline can be synchronized such that the host can queue multiple
+requests of data for the workload to process, but the DMA Bridge will only copy
+the data into the memory of the workload when the workload is ready to process
+the next input.
+
+Response FIFO
+-------------
+
+Once a request is fully processed, a response FIFO element is generated if
+specified in pcie_dma_cmd. The structure of a response FIFO element:
+
+.. code-block:: c
+
+  struct response_elem {
+	u16 req_id;
+	u16 completion_code;
+  };
+
+req_id
+	matches the req_id of the request that generated this element.
+
+completion_code
+	status of this request. 0 is success. Non-zero is an error.
+
+The DMA Bridge will generate a MSI to the host as a reaction to activity in the
+response FIFO of a DBC. The DMA Bridge hardware has an IRQ storm mitigation
+algorithm, where it will only generate a MSI when the response FIFO transitions
+from empty to non-empty (unless force MSI is enabled and triggered). In
+response to this MSI, the host is expected to drain the response FIFO, and must
+take care to handle any race conditions between draining the FIFO, and the
+device inserting elements into the FIFO.
+
+Neural Network Control (NNC) Protocol
+=====================================
+
+The NNC protocol is how the host makes requests to the QSM to manage workloads.
+It uses the QAIC_CONTROL MHI channel.
+
+Each NNC request is packaged into a message. Each message is a series of
+transactions. A passthrough type transaction can contain elements known as
+commands.
+
+QSM requires NNC messages be little endian encoded and the fields be naturally
+aligned. Since there are 64-bit elements in some NNC messages, 64-bit alignment
+must be maintained.
+
+A message contains a header and then a series of transactions. A message may be
+at most 4K in size from QSM to the host. From the host to the QSM, a message
+can be at most 64K (maximum size of a single MHI packet), but there is a
+continuation feature where message N+1 can be marked as a continuation of
+message N. This is used for exceedingly large DMA xfer transactions.
+
+Transaction descriptions
+------------------------
+
+passthrough
+	Allows userspace to send an opaque payload directly to the QSM.
+	This is used for NNC commands. Userspace is responsible for managing
+	the QSM message requirements in the payload.
+
+dma_xfer
+	DMA transfer. Describes an object that the QSM should DMA into the
+	device via address and size tuples.
+
+activate
+	Activate a workload onto NSPs. The host must provide memory to be
+	used by the DBC.
+
+deactivate
+	Deactivate an active workload and return the NSPs to idle.
+
+status
+	Query the QSM about it's NNC implementation. Returns the NNC version,
+	and if CRC is used.
+
+terminate
+	Release a user's resources.
+
+dma_xfer_cont
+	Continuation of a previous DMA transfer. If a DMA transfer
+	cannot be specified in a single message (highly fragmented), this
+	transaction can be used to specify more ranges.
+
+validate_partition
+	Query to QSM to determine if a partition identifier is valid.
+
+Each message is tagged with a user id, and a partition id. The user id allows
+QSM to track resources, and release them when the user goes away (eg the process
+crashes). A partition id identifies the resource partition that QSM manages,
+which this message applies to.
+
+Messages may have CRCs. Messages should have CRCs applied until the QSM
+reports via the status transaction that CRCs are not needed. The QSM on the
+SA9000P requires CRCs for black channel safing.
+
+Subsystem Restart (SSR)
+=======================
+
+SSR is the concept of limiting the impact of an error. An AIC100 device may
+have multiple users, each with their own workload running. If the workload of
+one user crashes, the fallout of that should be limited to that workload and not
+impact other workloads. SSR accomplishes this.
+
+If a particular workload crashes, QSM notifies the host via the QAIC_SSR MHI
+channel. This notification identifies the workload by it's assigned DBC. A
+multi-stage recovery process is then used to cleanup both sides, and get the
+DBC/NSPs into a working state.
+
+When SSR occurs, any state in the workload is lost. Any inputs that were in
+process, or queued by not yet serviced, are lost. The loaded artifacts will
+remain in on-card DDR, but the host will need to re-activate the workload if
+it desires to recover the workload.
+
+Reliability, Accessibility, Serviceability (RAS)
+================================================
+
+AIC100 is expected to be deployed in server systems where RAS ideology is
+applied. Simply put, RAS is the concept of detecting, classifying, and
+reporting errors. While PCIe has AER (Advanced Error Reporting) which factors
+into RAS, AER does not allow for a device to report details about internal
+errors. Therefore, AIC100 implements a custom RAS mechanism. When a RAS event
+occurs, QSM will report the event with appropriate details via the QAIC_STATUS
+MHI channel. A sysadmin may determine that a particular device needs
+additional service based on RAS reports.
+
+Telemetry
+=========
+
+QSM has the ability to report various physical attributes of the device, and in
+some cases, to allow the host to control them. Examples include thermal limits,
+thermal readings, and power readings. These items are communicated via the
+QAIC_TELEMETRY MHI channel.
diff --git a/Documentation/accel/qaic/index.rst b/Documentation/accel/qaic/index.rst
new file mode 100644
index 000000000000..ad19b88d1a66
--- /dev/null
+++ b/Documentation/accel/qaic/index.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+=====================================
+ accel/qaic Qualcomm Cloud AI driver
+=====================================
+
+The accel/qaic driver supports the Qualcomm Cloud AI machine learning
+accelerator cards.
+
+.. toctree::
+
+   qaic
+   aic100
diff --git a/Documentation/accel/qaic/qaic.rst b/Documentation/accel/qaic/qaic.rst
new file mode 100644
index 000000000000..72a70ab6e3a8
--- /dev/null
+++ b/Documentation/accel/qaic/qaic.rst
@@ -0,0 +1,170 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+=============
+ QAIC driver
+=============
+
+The QAIC driver is the Kernel Mode Driver (KMD) for the AIC100 family of AI
+accelerator products.
+
+Interrupts
+==========
+
+While the AIC100 DMA Bridge hardware implements an IRQ storm mitigation
+mechanism, it is still possible for an IRQ storm to occur. A storm can happen
+if the workload is particularly quick, and the host is responsive. If the host
+can drain the response FIFO as quickly as the device can insert elements into
+it, then the device will frequently transition the response FIFO from empty to
+non-empty and generate MSIs at a rate equivalent to the speed of the
+workload's ability to process inputs. The lprnet (license plate reader network)
+workload is known to trigger this condition, and can generate in excess of 100k
+MSIs per second. It has been observed that most systems cannot tolerate this
+for long, and will crash due to some form of watchdog due to the overhead of
+the interrupt controller interrupting the host CPU.
+
+To mitigate this issue, the QAIC driver implements specific IRQ handling. When
+QAIC receives an IRQ, it disables that line. This prevents the interrupt
+controller from interrupting the CPU. Then AIC drains the FIFO. Once the FIFO
+is drained, QAIC implements a "last chance" polling algorithm where QAIC will
+sleep for a time to see if the workload will generate more activity. The IRQ
+line remains disabled during this time. If no activity is detected, QAIC exits
+polling mode and reenables the IRQ line.
+
+This mitigation in QAIC is very effective. The same lprnet usecase that
+generates 100k IRQs per second (per /proc/interrupts) is reduced to roughly 64
+IRQs over 5 minutes while keeping the host system stable, and having the same
+workload throughput performance (within run to run noise variation).
+
+
+Neural Network Control (NNC) Protocol
+=====================================
+
+The implementation of NNC is split between the KMD (QAIC) and UMD. In general
+QAIC understands how to encode/decode NNC wire protocol, and elements of the
+protocol which require kernel space knowledge to process (for example, mapping
+host memory to device IOVAs). QAIC understands the structure of a message, and
+all of the transactions. QAIC does not understand commands (the payload of a
+passthrough transaction).
+
+QAIC handles and enforces the required little endianness and 64-bit alignment,
+to the degree that it can. Since QAIC does not know the contents of a
+passthrough transaction, it relies on the UMD to satisfy the requirements.
+
+The terminate transaction is of particular use to QAIC. QAIC is not aware of
+the resources that are loaded onto a device since the majority of that activity
+occurs within NNC commands. As a result, QAIC does not have the means to
+roll back userspace activity. To ensure that a userspace client's resources
+are fully released in the case of a process crash, or a bug, QAIC uses the
+terminate command to let QSM know when a user has gone away, and the resources
+can be released.
+
+QSM can report a version number of the NNC protocol it supports. This is in the
+form of a Major number and a Minor number.
+
+Major number updates indicate changes to the NNC protocol which impact the
+message format, or transactions (impacts QAIC).
+
+Minor number updates indicate changes to the NNC protocol which impact the
+commands (does not impact QAIC).
+
+uAPI
+====
+
+QAIC defines a number of driver specific IOCTLs as part of the userspace API.
+This section describes those APIs.
+
+DRM_IOCTL_QAIC_MANAGE
+  This IOCTL allows userspace to send a NNC request to the QSM. The call will
+  block until a response is received, or the request has timed out.
+
+DRM_IOCTL_QAIC_CREATE_BO
+  This IOCTL allows userspace to allocate a buffer object (BO) which can send
+  or receive data from a workload. The call will return a GEM handle that
+  represents the allocated buffer. The BO is not usable until it has been
+  sliced (see DRM_IOCTL_QAIC_ATTACH_SLICE_BO).
+
+DRM_IOCTL_QAIC_MMAP_BO
+  This IOCTL allows userspace to prepare an allocated BO to be mmap'd into the
+  userspace process.
+
+DRM_IOCTL_QAIC_ATTACH_SLICE_BO
+  This IOCTL allows userspace to slice a BO in preparation for sending the BO
+  to the device. Slicing is the operation of describing what portions of a BO
+  get sent where to a workload. This requires a set of DMA transfers for the
+  DMA Bridge, and as such, locks the BO to a specific DBC.
+
+DRM_IOCTL_QAIC_EXECUTE_BO
+  This IOCTL allows userspace to submit a set of sliced BOs to the device. The
+  call is non-blocking. Success only indicates that the BOs have been queued
+  to the device, but does not guarantee they have been executed.
+
+DRM_IOCTL_QAIC_PARTIAL_EXECUTE_BO
+  This IOCTL operates like DRM_IOCTL_QAIC_EXECUTE_BO, but it allows userspace
+  to shrink the BOs sent to the device for this specific call. If a BO
+  typically has N inputs, but only a subset of those is available, this IOCTL
+  allows userspace to indicate that only the first M bytes of the BO should be
+  sent to the device to minimize data transfer overhead. This IOCTL dynamically
+  recomputes the slicing, and therefore has some processing overhead before the
+  BOs can be queued to the device.
+
+DRM_IOCTL_QAIC_WAIT_BO
+  This IOCTL allows userspace to determine when a particular BO has been
+  processed by the device. The call will block until either the BO has been
+  processed and can be re-queued to the device, or a timeout occurs.
+
+DRM_IOCTL_QAIC_PERF_STATS_BO
+  This IOCTL allows userspace to collect performance statistics on the most
+  recent execution of a BO. This allows userspace to construct an end to end
+  timeline of the BO processing for a performance analysis.
+
+DRM_IOCTL_QAIC_PART_DEV
+  This IOCTL allows userspace to request a duplicate "shadow device". This extra
+  accelN device is associated with a specific partition of resources on the
+  AIC100 device and can be used for limiting a process to some subset of
+  resources.
+
+Userspace Client Isolation
+==========================
+
+AIC100 supports multiple clients. Multiple DBCs can be consumed by a single
+client, and multiple clients can each consume one or more DBCs. Workloads
+may contain sensitive information therefore only the client that owns the
+workload should be allowed to interface with the DBC.
+
+Clients are identified by the instance associated with their open(). A client
+may only use memory they allocate, and DBCs that are assigned to their
+workloads. Attempts to access resources assigned to other clients will be
+rejected.
+
+Module parameters
+=================
+
+QAIC supports the following module parameters:
+
+**datapath_polling (bool)**
+
+Configures QAIC to use a polling thread for datapath events instead of relying
+on the device interrupts. Useful for platforms with broken multiMSI. Must be
+set at QAIC driver initialization. Default is 0 (off).
+
+**mhi_timeout_ms (unsigned int)**
+
+Sets the timeout value for MHI operations in milliseconds (ms). Must be set
+at the time the driver detects a device. Default is 2000 (2 seconds).
+
+**control_resp_timeout_s (unsigned int)**
+
+Sets the timeout value for QSM responses to NNC messages in seconds (s). Must
+be set at the time the driver is sending a request to QSM. Default is 60 (one
+minute).
+
+**wait_exec_default_timeout_ms (unsigned int)**
+
+Sets the default timeout for the wait_exec ioctl in milliseconds (ms). Must be
+set prior to the waic_exec ioctl call. A value specified in the ioctl call
+overrides this for that call. Default is 5000 (5 seconds).
+
+**datapath_poll_interval_us (unsigned int)**
+
+Sets the polling interval in microseconds (us) when datapath polling is active.
+Takes effect at the next polling interval. Default is 100 (100 us).
diff --git a/Documentation/accounting/delay-accounting.rst b/Documentation/accounting/delay-accounting.rst
index 1b8b46deeb29..f61c01fc376e 100644
--- a/Documentation/accounting/delay-accounting.rst
+++ b/Documentation/accounting/delay-accounting.rst
@@ -13,6 +13,10 @@ a) waiting for a CPU (while being runnable)
 b) completion of synchronous block I/O initiated by the task
 c) swapping in pages
 d) memory reclaim
+e) thrashing
+f) direct compact
+g) write-protect copy
+h) IRQ/SOFTIRQ
 
 and makes these statistics available to userspace through
 the taskstats interface.
@@ -41,11 +45,12 @@ generic data structure to userspace corresponding to per-pid and per-tgid
 statistics. The delay accounting functionality populates specific fields of
 this structure. See
 
-     include/linux/taskstats.h
+     include/uapi/linux/taskstats.h
 
 for a description of the fields pertaining to delay accounting.
 It will generally be in the form of counters returning the cumulative
-delay seen for cpu, sync block I/O, swapin, memory reclaim etc.
+delay seen for cpu, sync block I/O, swapin, memory reclaim, thrash page
+cache, direct compact, write-protect copy, IRQ/SOFTIRQ etc.
 
 Taking the difference of two successive readings of a given
 counter (say cpu_delay_total) for a task will give the delay
@@ -88,41 +93,41 @@ seen.
 
 General format of the getdelays command::
 
-	getdelays [-t tgid] [-p pid] [-c cmd...]
-
+	getdelays [-dilv] [-t tgid] [-p pid]
 
 Get delays, since system boot, for pid 10::
 
-	# ./getdelays -p 10
+	# ./getdelays -d -p 10
 	(output similar to next case)
 
 Get sum of delays, since system boot, for all pids with tgid 5::
 
-	# ./getdelays -t 5
-
-
-	CPU	count	real total	virtual total	delay total
-		7876	92005750	100000000	24001500
-	IO	count	delay total
-		0	0
-	SWAP	count	delay total
-		0	0
-	RECLAIM	count	delay total
-		0	0
-
-Get delays seen in executing a given simple command::
-
-  # ./getdelays -c ls /
-
-  bin   data1  data3  data5  dev  home  media  opt   root  srv        sys  usr
-  boot  data2  data4  data6  etc  lib   mnt    proc  sbin  subdomain  tmp  var
-
-
-  CPU	count	real total	virtual total	delay total
-	6	4000250		4000000		0
-  IO	count	delay total
-	0	0
-  SWAP	count	delay total
-	0	0
-  RECLAIM	count	delay total
-	0	0
+	# ./getdelays -d -t 5
+	print delayacct stats ON
+	TGID	5
+
+
+	CPU             count     real total  virtual total    delay total  delay average
+	                    8        7000000        6872122        3382277          0.423ms
+	IO              count    delay total  delay average
+                   0              0          0.000ms
+	SWAP            count    delay total  delay average
+                       0              0          0.000ms
+	RECLAIM         count    delay total  delay average
+                   0              0          0.000ms
+	THRASHING       count    delay total  delay average
+                       0              0          0.000ms
+	COMPACT         count    delay total  delay average
+                       0              0          0.000ms
+	WPCOPY          count    delay total  delay average
+                       0              0          0.000ms
+	IRQ             count    delay total  delay average
+                       0              0          0.000ms
+
+Get IO accounting for pid 1, it works only with -p::
+
+	# ./getdelays -i -p 1
+	printing IO accounting
+	linuxrc: read=65536, write=0, cancelled_write=0
+
+The above command can be used with -v to get more debug information.
diff --git a/Documentation/accounting/psi.rst b/Documentation/accounting/psi.rst
index f2b3439edcc2..df6062eb3abb 100644
--- a/Documentation/accounting/psi.rst
+++ b/Documentation/accounting/psi.rst
@@ -37,11 +37,7 @@ Pressure interface
 Pressure information for each resource is exported through the
 respective file in /proc/pressure/ -- cpu, memory, and io.
 
-The format for CPU is as such::
-
-	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
-
-and for memory and IO::
+The format is as such::
 
 	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
 	full avg10=0.00 avg60=0.00 avg300=0.00 total=0
@@ -58,6 +54,9 @@ situation from a state where some tasks are stalled but the CPU is
 still doing productive work. As such, time spent in this subset of the
 stall state is tracked separately and exported in the "full" averages.
 
+CPU full is undefined at the system level, but has been reported
+since 5.13, so it is set to zero for backward compatibility.
+
 The ratios (in %) are tracked as recent trends over ten, sixty, and
 three hundred second windows, which gives insight into short term events
 as well as medium and long term trends. The total absolute stall time
@@ -92,7 +91,8 @@ Triggers can be set on more than one psi metric and more than one trigger
 for the same psi metric can be specified. However for each trigger a separate
 file descriptor is required to be able to poll it separately from others,
 therefore for each trigger a separate open() syscall should be made even
-when opening the same psi interface file.
+when opening the same psi interface file. Write operations to a file descriptor
+with an already existing psi trigger will fail with EBUSY.
 
 Monitors activate only when system enters stall state for the monitored
 psi metric and deactivates upon exit from the stall state. While system is
@@ -105,6 +105,10 @@ prevent overly frequent polling. Max limit is chosen as a high enough number
 after which monitors are most likely not needed and psi averages can be used
 instead.
 
+Unprivileged users can also create monitors, with the only limitation that the
+window size must be a multiple of 2s, in order to prevent excessive resource
+usage.
+
 When activated, psi monitor stays active for at least the duration of one
 tracking window to avoid repeated activations/deactivations when system is
 bouncing in and out of the stall state.
diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst
index caa3c09a5c3f..9a969c0157f1 100644
--- a/Documentation/admin-guide/README.rst
+++ b/Documentation/admin-guide/README.rst
@@ -1,9 +1,9 @@
 .. _readme:
 
-Linux kernel release 5.x <http://kernel.org/>
+Linux kernel release 6.x <http://kernel.org/>
 =============================================
 
-These are the release notes for Linux version 5.  Read them carefully,
+These are the release notes for Linux version 6.  Read them carefully,
 as they tell you what this is all about, explain how to install the
 kernel, and what to do if something goes wrong.
 
@@ -63,7 +63,7 @@ Installing the kernel source
    directory where you have permissions (e.g. your home directory) and
    unpack it::
 
-     xz -cd linux-5.x.tar.xz | tar xvf -
+     xz -cd linux-6.x.tar.xz | tar xvf -
 
    Replace "X" with the version number of the latest kernel.
 
@@ -72,12 +72,12 @@ Installing the kernel source
    files.  They should match the library, and not get messed up by
    whatever the kernel-du-jour happens to be.
 
- - You can also upgrade between 5.x releases by patching.  Patches are
+ - You can also upgrade between 6.x releases by patching.  Patches are
    distributed in the xz format.  To install by patching, get all the
    newer patch files, enter the top level directory of the kernel source
-   (linux-5.x) and execute::
+   (linux-6.x) and execute::
 
-     xz -cd ../patch-5.x.xz | patch -p1
+     xz -cd ../patch-6.x.xz | patch -p1
 
    Replace "x" for all versions bigger than the version "x" of your current
    source tree, **in_order**, and you should be ok.  You may want to remove
@@ -85,13 +85,13 @@ Installing the kernel source
    that there are no failed patches (some-file-name# or some-file-name.rej).
    If there are, either you or I have made a mistake.
 
-   Unlike patches for the 5.x kernels, patches for the 5.x.y kernels
+   Unlike patches for the 6.x kernels, patches for the 6.x.y kernels
    (also known as the -stable kernels) are not incremental but instead apply
-   directly to the base 5.x kernel.  For example, if your base kernel is 5.0
-   and you want to apply the 5.0.3 patch, you must not first apply the 5.0.1
-   and 5.0.2 patches. Similarly, if you are running kernel version 5.0.2 and
-   want to jump to 5.0.3, you must first reverse the 5.0.2 patch (that is,
-   patch -R) **before** applying the 5.0.3 patch. You can read more on this in
+   directly to the base 6.x kernel.  For example, if your base kernel is 6.0
+   and you want to apply the 6.0.3 patch, you must not first apply the 6.0.1
+   and 6.0.2 patches. Similarly, if you are running kernel version 6.0.2 and
+   want to jump to 6.0.3, you must first reverse the 6.0.2 patch (that is,
+   patch -R) **before** applying the 6.0.3 patch. You can read more on this in
    :ref:`Documentation/process/applying-patches.rst <applying_patches>`.
 
    Alternatively, the script patch-kernel can be used to automate this
@@ -114,7 +114,7 @@ Installing the kernel source
 Software requirements
 ---------------------
 
-   Compiling and running the 5.x kernels requires up-to-date
+   Compiling and running the 6.x kernels requires up-to-date
    versions of various software packages.  Consult
    :ref:`Documentation/process/changes.rst <changes>` for the minimum version numbers
    required and how to get updates for these packages.  Beware that using
@@ -132,12 +132,12 @@ Build directory for the kernel
    place for the output files (including .config).
    Example::
 
-     kernel source code: /usr/src/linux-5.x
+     kernel source code: /usr/src/linux-6.x
      build directory:    /home/name/build/kernel
 
    To configure and build the kernel, use::
 
-     cd /usr/src/linux-5.x
+     cd /usr/src/linux-6.x
      make O=/home/name/build/kernel menuconfig
      make O=/home/name/build/kernel
      sudo make O=/home/name/build/kernel modules_install install
@@ -262,8 +262,6 @@ Compiling the kernel
  - Make sure you have at least gcc 5.1 available.
    For more information, refer to :ref:`Documentation/process/changes.rst <changes>`.
 
-   Please note that you can still run a.out user programs with this kernel.
-
  - Do a ``make`` to create a compressed kernel image. It is also
    possible to do ``make install`` if you have lilo installed to suit the
    kernel makefiles, but you may want to check your particular lilo setup first.
@@ -332,85 +330,10 @@ Compiling the kernel
 If something goes wrong
 -----------------------
 
- - If you have problems that seem to be due to kernel bugs, please check
-   the file MAINTAINERS to see if there is a particular person associated
-   with the part of the kernel that you are having trouble with. If there
-   isn't anyone listed there, then the second best thing is to mail
-   them to me (torvalds@linux-foundation.org), and possibly to any other
-   relevant mailing-list or to the newsgroup.
-
- - In all bug-reports, *please* tell what kernel you are talking about,
-   how to duplicate the problem, and what your setup is (use your common
-   sense).  If the problem is new, tell me so, and if the problem is
-   old, please try to tell me when you first noticed it.
-
- - If the bug results in a message like::
-
-     unable to handle kernel paging request at address C0000010
-     Oops: 0002
-     EIP:   0010:XXXXXXXX
-     eax: xxxxxxxx   ebx: xxxxxxxx   ecx: xxxxxxxx   edx: xxxxxxxx
-     esi: xxxxxxxx   edi: xxxxxxxx   ebp: xxxxxxxx
-     ds: xxxx  es: xxxx  fs: xxxx  gs: xxxx
-     Pid: xx, process nr: xx
-     xx xx xx xx xx xx xx xx xx xx
-
-   or similar kernel debugging information on your screen or in your
-   system log, please duplicate it *exactly*.  The dump may look
-   incomprehensible to you, but it does contain information that may
-   help debugging the problem.  The text above the dump is also
-   important: it tells something about why the kernel dumped code (in
-   the above example, it's due to a bad kernel pointer). More information
-   on making sense of the dump is in Documentation/admin-guide/bug-hunting.rst
-
- - If you compiled the kernel with CONFIG_KALLSYMS you can send the dump
-   as is, otherwise you will have to use the ``ksymoops`` program to make
-   sense of the dump (but compiling with CONFIG_KALLSYMS is usually preferred).
-   This utility can be downloaded from
-   https://www.kernel.org/pub/linux/utils/kernel/ksymoops/ .
-   Alternatively, you can do the dump lookup by hand:
-
- - In debugging dumps like the above, it helps enormously if you can
-   look up what the EIP value means.  The hex value as such doesn't help
-   me or anybody else very much: it will depend on your particular
-   kernel setup.  What you should do is take the hex value from the EIP
-   line (ignore the ``0010:``), and look it up in the kernel namelist to
-   see which kernel function contains the offending address.
-
-   To find out the kernel function name, you'll need to find the system
-   binary associated with the kernel that exhibited the symptom.  This is
-   the file 'linux/vmlinux'.  To extract the namelist and match it against
-   the EIP from the kernel crash, do::
-
-     nm vmlinux | sort | less
-
-   This will give you a list of kernel addresses sorted in ascending
-   order, from which it is simple to find the function that contains the
-   offending address.  Note that the address given by the kernel
-   debugging messages will not necessarily match exactly with the
-   function addresses (in fact, that is very unlikely), so you can't
-   just 'grep' the list: the list will, however, give you the starting
-   point of each kernel function, so by looking for the function that
-   has a starting address lower than the one you are searching for but
-   is followed by a function with a higher address you will find the one
-   you want.  In fact, it may be a good idea to include a bit of
-   "context" in your problem report, giving a few lines around the
-   interesting one.
-
-   If you for some reason cannot do the above (you have a pre-compiled
-   kernel image or similar), telling me as much about your setup as
-   possible will help.  Please read
-   'Documentation/admin-guide/reporting-issues.rst' for details.
-
- - Alternatively, you can use gdb on a running kernel. (read-only; i.e. you
-   cannot change values or set break points.) To do this, first compile the
-   kernel with -g; edit arch/x86/Makefile appropriately, then do a ``make
-   clean``. You'll also need to enable CONFIG_PROC_FS (via ``make config``).
-
-   After you've rebooted with the new kernel, do ``gdb vmlinux /proc/kcore``.
-   You can now use all the usual gdb commands. The command to look up the
-   point where your system crashed is ``l *0xXXXXXXXX``. (Replace the XXXes
-   with the EIP value.)
-
-   gdb'ing a non-running kernel currently fails because ``gdb`` (wrongly)
-   disregards the starting offset for which the kernel is compiled.
+If you have problems that seem to be due to kernel bugs, please follow the
+instructions at 'Documentation/admin-guide/reporting-issues.rst'.
+
+Hints on understanding kernel bug reports are in
+'Documentation/admin-guide/bug-hunting.rst'. More on debugging the kernel
+with gdb is in 'Documentation/dev-tools/gdb-kernel-debugging.rst' and
+'Documentation/dev-tools/kgdb.rst'.
diff --git a/Documentation/admin-guide/acpi/cppc_sysfs.rst b/Documentation/admin-guide/acpi/cppc_sysfs.rst
index fccf22114e85..e53d76365aa7 100644
--- a/Documentation/admin-guide/acpi/cppc_sysfs.rst
+++ b/Documentation/admin-guide/acpi/cppc_sysfs.rst
@@ -4,6 +4,8 @@
 Collaborative Processor Performance Control (CPPC)
 ==================================================
 
+.. _cppc_sysfs:
+
 CPPC
 ====
 
diff --git a/Documentation/admin-guide/acpi/dsdt-override.rst b/Documentation/admin-guide/acpi/dsdt-override.rst
deleted file mode 100644
index 50bd7f194bf4..000000000000
--- a/Documentation/admin-guide/acpi/dsdt-override.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-===============
-Overriding DSDT
-===============
-
-Linux supports a method of overriding the BIOS DSDT:
-
-CONFIG_ACPI_CUSTOM_DSDT - builds the image into the kernel.
-
-When to use this method is described in detail on the
-Linux/ACPI home page:
-https://01.org/linux-acpi/documentation/overriding-dsdt
diff --git a/Documentation/admin-guide/acpi/fan_performance_states.rst b/Documentation/admin-guide/acpi/fan_performance_states.rst
index 98fe5c333121..b9e4b4d146c1 100644
--- a/Documentation/admin-guide/acpi/fan_performance_states.rst
+++ b/Documentation/admin-guide/acpi/fan_performance_states.rst
@@ -60,3 +60,31 @@ For example::
 
 When a given field is not populated or its value provided by the platform
 firmware is invalid, the "not-defined" string is shown instead of the value.
+
+ACPI Fan Fine Grain Control
+=============================
+
+When _FIF object specifies support for fine grain control, then fan speed
+can be set from 0 to 100% with the recommended minimum "step size" via
+_FSL object. User can adjust fan speed using thermal sysfs cooling device.
+
+Here use can look at fan performance states for a reference speed (speed_rpm)
+and set it by changing cooling device cur_state. If the fine grain control
+is supported then user can also adjust to some other speeds which are
+not defined in the performance states.
+
+The support of fine grain control is presented via sysfs attribute
+"fine_grain_control". If fine grain control is present, this attribute
+will show "1" otherwise "0".
+
+This sysfs attribute is presented in the same directory as performance states.
+
+ACPI Fan Performance Feedback
+=============================
+
+The optional _FST object provides status information for the fan device.
+This includes field to provide current fan speed in revolutions per minute
+at which the fan is rotating.
+
+This speed is presented in the sysfs using the attribute "fan_speed_rpm",
+in the same directory as performance states.
diff --git a/Documentation/admin-guide/acpi/index.rst b/Documentation/admin-guide/acpi/index.rst
index 71277689ad97..b078fdb8f4c9 100644
--- a/Documentation/admin-guide/acpi/index.rst
+++ b/Documentation/admin-guide/acpi/index.rst
@@ -9,7 +9,6 @@ the Linux ACPI support.
    :maxdepth: 1
 
    initrd_table_override
-   dsdt-override
    ssdt-overlays
    cppc_sysfs
    fan_performance_states
diff --git a/Documentation/admin-guide/bcache.rst b/Documentation/admin-guide/bcache.rst
index 8d3a2d045c0a..bb5032a99234 100644
--- a/Documentation/admin-guide/bcache.rst
+++ b/Documentation/admin-guide/bcache.rst
@@ -204,7 +204,7 @@ For example::
 This should present your unmodified backing device data in /dev/loop0
 
 If your cache is in writethrough mode, then you can safely discard the
-cache device without loosing data.
+cache device without losing data.
 
 
 E) Wiping a cache device
diff --git a/Documentation/admin-guide/blockdev/drbd/figures.rst b/Documentation/admin-guide/blockdev/drbd/figures.rst
index bd9a4901fe46..9f73253ea353 100644
--- a/Documentation/admin-guide/blockdev/drbd/figures.rst
+++ b/Documentation/admin-guide/blockdev/drbd/figures.rst
@@ -25,6 +25,6 @@ Sub graphs of DRBD's state transitions
     :alt:   disk-states-8.dot
     :align: center
 
-.. kernel-figure:: node-states-8.dot
-    :alt:   node-states-8.dot
+.. kernel-figure:: peer-states-8.dot
+    :alt:   peer-states-8.dot
     :align: center
diff --git a/Documentation/admin-guide/blockdev/drbd/node-states-8.dot b/Documentation/admin-guide/blockdev/drbd/node-states-8.dot
deleted file mode 100644
index bfa54e1f8016..000000000000
--- a/Documentation/admin-guide/blockdev/drbd/node-states-8.dot
+++ /dev/null
@@ -1,13 +0,0 @@
-digraph node_states {
-	Secondary -> Primary           [ label = "ioctl_set_state()" ]
-	Primary   -> Secondary 	       [ label = "ioctl_set_state()" ]
-}
-
-digraph peer_states {
-	Secondary -> Primary           [ label = "recv state packet" ]
-	Primary   -> Secondary 	       [ label = "recv state packet" ]
-	Primary   -> Unknown 	       [ label = "connection lost" ]
-	Secondary  -> Unknown  	       [ label = "connection lost" ]
-	Unknown   -> Primary           [ label = "connected" ]
-	Unknown   -> Secondary         [ label = "connected" ]
-}
diff --git a/Documentation/admin-guide/blockdev/drbd/peer-states-8.dot b/Documentation/admin-guide/blockdev/drbd/peer-states-8.dot
new file mode 100644
index 000000000000..6dc3954954d6
--- /dev/null
+++ b/Documentation/admin-guide/blockdev/drbd/peer-states-8.dot
@@ -0,0 +1,8 @@
+digraph peer_states {
+	Secondary -> Primary           [ label = "recv state packet" ]
+	Primary   -> Secondary 	       [ label = "recv state packet" ]
+	Primary   -> Unknown 	       [ label = "connection lost" ]
+	Secondary  -> Unknown  	       [ label = "connection lost" ]
+	Unknown   -> Primary           [ label = "connected" ]
+	Unknown   -> Secondary         [ label = "connected" ]
+}
diff --git a/Documentation/admin-guide/blockdev/index.rst b/Documentation/admin-guide/blockdev/index.rst
index b903cf152091..957ccf617797 100644
--- a/Documentation/admin-guide/blockdev/index.rst
+++ b/Documentation/admin-guide/blockdev/index.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-===========================
-The Linux RapidIO Subsystem
-===========================
+=============
+Block Devices
+=============
 
 .. toctree::
    :maxdepth: 1
diff --git a/Documentation/admin-guide/blockdev/nbd.rst b/Documentation/admin-guide/blockdev/nbd.rst
index d78dfe559dcf..faf2ac4b1509 100644
--- a/Documentation/admin-guide/blockdev/nbd.rst
+++ b/Documentation/admin-guide/blockdev/nbd.rst
@@ -14,7 +14,7 @@ to borrow disk space from another computer.
 Unlike NFS, it is possible to put any filesystem on it, etc.
 
 For more information, or to download the nbd-client and nbd-server
-tools, go to http://nbd.sf.net/.
+tools, go to https://github.com/NetworkBlockDevice/nbd.
 
 The nbd kernel module need only be installed on the client
 system, as the nbd-server is completely in userspace. In fact,
diff --git a/Documentation/admin-guide/blockdev/paride.rst b/Documentation/admin-guide/blockdev/paride.rst
index e1ce90af602a..e85ad37cc0e5 100644
--- a/Documentation/admin-guide/blockdev/paride.rst
+++ b/Documentation/admin-guide/blockdev/paride.rst
@@ -3,6 +3,7 @@ Linux and parallel port IDE devices
 ===================================
 
 PARIDE v1.03   (c) 1997-8  Grant Guenther <grant@torque.net>
+PATA_PARPORT   (c) 2023 Ondrej Zary
 
 1. Introduction
 ===============
@@ -51,27 +52,15 @@ parallel port IDE subsystem, including:
 
 as well as most of the clone and no-name products on the market.
 
-To support such a wide range of devices, PARIDE, the parallel port IDE
-subsystem, is actually structured in three parts.   There is a base
-paride module which provides a registry and some common methods for
-accessing the parallel ports.  The second component is a set of
-high-level drivers for each of the different types of supported devices:
+To support such a wide range of devices, pata_parport is actually structured
+in two parts. There is a base pata_parport module which provides an interface
+to kernel libata subsystem, registry and some common methods for accessing
+the parallel ports.
 
-	===	=============
-	pd	IDE disk
-	pcd	ATAPI CD-ROM
-	pf	ATAPI disk
-	pt	ATAPI tape
-	pg	ATAPI generic
-	===	=============
-
-(Currently, the pg driver is only used with CD-R drives).
-
-The high-level drivers function according to the relevant standards.
-The third component of PARIDE is a set of low-level protocol drivers
-for each of the parallel port IDE adapter chips.  Thanks to the interest
-and encouragement of Linux users from many parts of the world,
-support is available for almost all known adapter protocols:
+The second component is a set of low-level protocol drivers for each of the
+parallel port IDE adapter chips.  Thanks to the interest and encouragement of
+Linux users from many parts of the world, support is available for almost all
+known adapter protocols:
 
 	====    ====================================== ====
         aten    ATEN EH-100                            (HK)
@@ -91,251 +80,87 @@ support is available for almost all known adapter protocols:
 	====    ====================================== ====
 
 
-2. Using the PARIDE subsystem
-=============================
+2. Using pata_parport subsystem
+===============================
 
 While configuring the Linux kernel, you may choose either to build
-the PARIDE drivers into your kernel, or to build them as modules.
+the pata_parport drivers into your kernel, or to build them as modules.
 
 In either case, you will need to select "Parallel port IDE device support"
-as well as at least one of the high-level drivers and at least one
-of the parallel port communication protocols.  If you do not know
-what kind of parallel port adapter is used in your drive, you could
-begin by checking the file names and any text files on your DOS
+and at least one of the parallel port communication protocols.
+If you do not know what kind of parallel port adapter is used in your drive,
+you could begin by checking the file names and any text files on your DOS
 installation floppy.  Alternatively, you can look at the markings on
 the adapter chip itself.  That's usually sufficient to identify the
 correct device.
 
-You can actually select all the protocol modules, and allow the PARIDE
+You can actually select all the protocol modules, and allow the pata_parport
 subsystem to try them all for you.
 
 For the "brand-name" products listed above, here are the protocol
 and high-level drivers that you would use:
 
-	================	============	======	========
-	Manufacturer		Model		Driver	Protocol
-	================	============	======	========
-	MicroSolutions		CD-ROM		pcd	bpck
-	MicroSolutions		PD drive	pf	bpck
-	MicroSolutions		hard-drive	pd	bpck
-	MicroSolutions          8000t tape      pt      bpck
-	SyQuest			EZ, SparQ	pd	epat
-	Imation			Superdisk	pf	epat
-	Maxell                  Superdisk       pf      friq
-	Avatar			Shark		pd	epat
-	FreeCom			CD-ROM		pcd	frpw
-	Hewlett-Packard		5GB Tape	pt	epat
-	Hewlett-Packard		7200e (CD)	pcd	epat
-	Hewlett-Packard		7200e (CD-R)	pg	epat
-	================	============	======	========
-
-2.1  Configuring built-in drivers
----------------------------------
-
-We recommend that you get to know how the drivers work and how to
-configure them as loadable modules, before attempting to compile a
-kernel with the drivers built-in.
-
-If you built all of your PARIDE support directly into your kernel,
-and you have just a single parallel port IDE device, your kernel should
-locate it automatically for you.  If you have more than one device,
-you may need to give some command line options to your bootloader
-(eg: LILO), how to do that is beyond the scope of this document.
-
-The high-level drivers accept a number of command line parameters, all
-of which are documented in the source files in linux/drivers/block/paride.
-By default, each driver will automatically try all parallel ports it
-can find, and all protocol types that have been installed, until it finds
-a parallel port IDE adapter.  Once it finds one, the probe stops.  So,
-if you have more than one device, you will need to tell the drivers
-how to identify them.  This requires specifying the port address, the
-protocol identification number and, for some devices, the drive's
-chain ID.  While your system is booting, a number of messages are
-displayed on the console.  Like all such messages, they can be
-reviewed with the 'dmesg' command.  Among those messages will be
-some lines like::
-
-	paride: bpck registered as protocol 0
-	paride: epat registered as protocol 1
-
-The numbers will always be the same until you build a new kernel with
-different protocol selections.  You should note these numbers as you
-will need them to identify the devices.
+	================	============	========
+	Manufacturer		Model		Protocol
+	================	============	========
+	MicroSolutions		CD-ROM		bpck
+	MicroSolutions		PD drive	bpck
+	MicroSolutions		hard-drive	bpck
+	MicroSolutions          8000t tape      bpck
+	SyQuest			EZ, SparQ	epat
+	Imation			Superdisk	epat
+	Maxell                  Superdisk       friq
+	Avatar			Shark		epat
+	FreeCom			CD-ROM		frpw
+	Hewlett-Packard		5GB Tape	epat
+	Hewlett-Packard		7200e (CD)	epat
+	Hewlett-Packard		7200e (CD-R)	epat
+	================	============	========
+
+All parports and all protocol drivers are probed automatically unless probe=0
+parameter is used. So just "modprobe epat" is enough for a Imation SuperDisk
+drive to work.
+
+Manual device creation::
+
+	# echo "port protocol mode unit delay" >/sys/bus/pata_parport/new_device
+
+where:
+
+	======== ================================================
+	port	 parport name (or "auto" for all parports)
+	protocol protocol name (or "auto" for all protocols)
+	mode	 mode number (protocol-specific) or -1 for probe
+	unit	 unit number (for backpack only, see below)
+	delay	 I/O delay (see troubleshooting section below)
+	======== ================================================
 
 If you happen to be using a MicroSolutions backpack device, you will
 also need to know the unit ID number for each drive.  This is usually
 the last two digits of the drive's serial number (but read MicroSolutions'
 documentation about this).
 
-As an example, let's assume that you have a MicroSolutions PD/CD drive
-with unit ID number 36 connected to the parallel port at 0x378, a SyQuest
-EZ-135 connected to the chained port on the PD/CD drive and also an
-Imation Superdisk connected to port 0x278.  You could give the following
-options on your boot command::
-
-	pd.drive0=0x378,1 pf.drive0=0x278,1 pf.drive1=0x378,0,36
-
-In the last option, pf.drive1 configures device /dev/pf1, the 0x378
-is the parallel port base address, the 0 is the protocol registration
-number and 36 is the chain ID.
-
-Please note:  while PARIDE will work both with and without the
-PARPORT parallel port sharing system that is included by the
-"Parallel port support" option, PARPORT must be included and enabled
-if you want to use chains of devices on the same parallel port.
-
-2.2  Loading and configuring PARIDE as modules
-----------------------------------------------
-
-It is much faster and simpler to get to understand the PARIDE drivers
-if you use them as loadable kernel modules.
-
-Note 1:
-	using these drivers with the "kerneld" automatic module loading
-	system is not recommended for beginners, and is not documented here.
-
-Note 2:
-	if you build PARPORT support as a loadable module, PARIDE must
-	also be built as loadable modules, and PARPORT must be loaded before
-	the PARIDE modules.
-
-To use PARIDE, you must begin by::
-
-	insmod paride
-
-this loads a base module which provides a registry for the protocols,
-among other tasks.
-
-Then, load as many of the protocol modules as you think you might need.
-As you load each module, it will register the protocols that it supports,
-and print a log message to your kernel log file and your console. For
-example::
-
-	# insmod epat
-	paride: epat registered as protocol 0
-	# insmod kbic
-	paride: k951 registered as protocol 1
-        paride: k971 registered as protocol 2
-
-Finally, you can load high-level drivers for each kind of device that
-you have connected.  By default, each driver will autoprobe for a single
-device, but you can support up to four similar devices by giving their
-individual coordinates when you load the driver.
-
-For example, if you had two no-name CD-ROM drives both using the
-KingByte KBIC-951A adapter, one on port 0x378 and the other on 0x3bc
-you could give the following command::
-
-	# insmod pcd drive0=0x378,1 drive1=0x3bc,1
-
-For most adapters, giving a port address and protocol number is sufficient,
-but check the source files in linux/drivers/block/paride for more
-information.  (Hopefully someone will write some man pages one day !).
-
-As another example, here's what happens when PARPORT is installed, and
-a SyQuest EZ-135 is attached to port 0x378::
-
-	# insmod paride
-	paride: version 1.0 installed
-	# insmod epat
-	paride: epat registered as protocol 0
-	# insmod pd
-	pd: pd version 1.0, major 45, cluster 64, nice 0
-	pda: Sharing parport1 at 0x378
-	pda: epat 1.0, Shuttle EPAT chip c3 at 0x378, mode 5 (EPP-32), delay 1
-	pda: SyQuest EZ135A, 262144 blocks [128M], (512/16/32), removable media
-	 pda: pda1
-
-Note that the last line is the output from the generic partition table
-scanner - in this case it reports that it has found a disk with one partition.
-
-2.3  Using a PARIDE device
---------------------------
-
-Once the drivers have been loaded, you can access PARIDE devices in the
-same way as their traditional counterparts.  You will probably need to
-create the device "special files".  Here is a simple script that you can
-cut to a file and execute::
-
-  #!/bin/bash
-  #
-  # mkd -- a script to create the device special files for the PARIDE subsystem
-  #
-  function mkdev {
-    mknod $1 $2 $3 $4 ; chmod 0660 $1 ; chown root:disk $1
-  }
-  #
-  function pd {
-    D=$( printf \\$( printf "x%03x" $[ $1 + 97 ] ) )
-    mkdev pd$D b 45 $[ $1 * 16 ]
-    for P in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
-    do mkdev pd$D$P b 45 $[ $1 * 16 + $P ]
-    done
-  }
-  #
-  cd /dev
-  #
-  for u in 0 1 2 3 ; do pd $u ; done
-  for u in 0 1 2 3 ; do mkdev pcd$u b 46 $u ; done
-  for u in 0 1 2 3 ; do mkdev pf$u  b 47 $u ; done
-  for u in 0 1 2 3 ; do mkdev pt$u  c 96 $u ; done
-  for u in 0 1 2 3 ; do mkdev npt$u c 96 $[ $u + 128 ] ; done
-  for u in 0 1 2 3 ; do mkdev pg$u  c 97 $u ; done
-  #
-  # end of mkd
-
-With the device files and drivers in place, you can access PARIDE devices
-like any other Linux device.   For example, to mount a CD-ROM in pcd0, use::
-
-	mount /dev/pcd0 /cdrom
-
-If you have a fresh Avatar Shark cartridge, and the drive is pda, you
-might do something like::
-
-	fdisk /dev/pda		-- make a new partition table with
-				   partition 1 of type 83
-
-	mke2fs /dev/pda1	-- to build the file system
-
-	mkdir /shark		-- make a place to mount the disk
-
-	mount /dev/pda1 /shark
-
-Devices like the Imation superdisk work in the same way, except that
-they do not have a partition table.  For example to make a 120MB
-floppy that you could share with a DOS system::
-
-	mkdosfs /dev/pf0
-	mount /dev/pf0 /mnt
-
-
-2.4  The pf driver
-------------------
-
-The pf driver is intended for use with parallel port ATAPI disk
-devices.  The most common devices in this category are PD drives
-and LS-120 drives.  Traditionally, media for these devices are not
-partitioned.  Consequently, the pf driver does not support partitioned
-media.  This may be changed in a future version of the driver.
-
-2.5  Using the pt driver
-------------------------
-
-The pt driver for parallel port ATAPI tape drives is a minimal driver.
-It does not yet support many of the standard tape ioctl operations.
-For best performance, a block size of 32KB should be used.  You will
-probably want to set the parallel port delay to 0, if you can.
-
-2.6  Using the pg driver
-------------------------
-
-The pg driver can be used in conjunction with the cdrecord program
-to create CD-ROMs.  Please get cdrecord version 1.6.1 or later
-from ftp://ftp.fokus.gmd.de/pub/unix/cdrecord/ .  To record CD-R media
-your parallel port should ideally be set to EPP mode, and the "port delay"
-should be set to 0.  With those settings it is possible to record at 2x
-speed without any buffer underruns.  If you cannot get the driver to work
-in EPP mode, try to use "bidirectional" or "PS/2" mode and 1x speeds only.
+If you omit the parameters from the end, defaults will be used, e.g.:
+
+Probe all parports with all protocols::
+
+	# echo auto >/sys/bus/pata_parport/new_device
+
+Probe parport0 using protocol epat and mode 4 (EPP-16)::
+
+	# echo "parport0 epat 4" >/sys/bus/pata_parport/new_device
+
+Probe parport0 using all protocols::
+
+	# echo "parport0 auto" >/sys/bus/pata_parport/new_device
+
+Probe all parports using protoocol epat::
+
+	# echo "auto epat" >/sys/bus/pata_parport/new_device
+
+Deleting devices::
+
+	# echo pata_parport.0 >/sys/bus/pata_parport/delete_device
 
 
 3. Troubleshooting
@@ -344,9 +169,9 @@ in EPP mode, try to use "bidirectional" or "PS/2" mode and 1x speeds only.
 3.1  Use EPP mode if you can
 ----------------------------
 
-The most common problems that people report with the PARIDE drivers
+The most common problems that people report with the pata_parport drivers
 concern the parallel port CMOS settings.  At this time, none of the
-PARIDE protocol modules support ECP mode, or any ECP combination modes.
+protocol modules support ECP mode, or any ECP combination modes.
 If you are able to do so, please set your parallel port into EPP mode
 using your CMOS setup procedure.
 
@@ -354,17 +179,14 @@ using your CMOS setup procedure.
 -------------------------
 
 Some parallel ports cannot reliably transfer data at full speed.  To
-offset the errors, the PARIDE protocol modules introduce a "port
+offset the errors, the protocol modules introduce a "port
 delay" between each access to the i/o ports.  Each protocol sets
 a default value for this delay.  In most cases, the user can override
 the default and set it to 0 - resulting in somewhat higher transfer
 rates.  In some rare cases (especially with older 486 systems) the
 default delays are not long enough.  if you experience corrupt data
 transfers, or unexpected failures, you may wish to increase the
-port delay.   The delay can be programmed using the "driveN" parameters
-to each of the high-level drivers.  Please see the notes above, or
-read the comments at the beginning of the driver source files in
-linux/drivers/block/paride.
+port delay.
 
 3.3  Some drives need a printer reset
 -------------------------------------
@@ -374,66 +196,12 @@ that do not always power up correctly.  We have noticed this with some
 drives based on OnSpec and older Freecom adapters.  In these rare cases,
 the adapter can often be reinitialised by issuing a "printer reset" on
 the parallel port.  As the reset operation is potentially disruptive in
-multiple device environments, the PARIDE drivers will not do it
+multiple device environments, the pata_parport drivers will not do it
 automatically.  You can however, force a printer reset by doing::
 
 	insmod lp reset=1
 	rmmod lp
 
 If you have one of these marginal cases, you should probably build
-your paride drivers as modules, and arrange to do the printer reset
-before loading the PARIDE drivers.
-
-3.4  Use the verbose option and dmesg if you need help
-------------------------------------------------------
-
-While a lot of testing has gone into these drivers to make them work
-as smoothly as possible, problems will arise.  If you do have problems,
-please check all the obvious things first:  does the drive work in
-DOS with the manufacturer's drivers ?  If that doesn't yield any useful
-clues, then please make sure that only one drive is hooked to your system,
-and that either (a) PARPORT is enabled or (b) no other device driver
-is using your parallel port (check in /proc/ioports).  Then, load the
-appropriate drivers (you can load several protocol modules if you want)
-as in::
-
-	# insmod paride
-	# insmod epat
-	# insmod bpck
-	# insmod kbic
-	...
-	# insmod pd verbose=1
-
-(using the correct driver for the type of device you have, of course).
-The verbose=1 parameter will cause the drivers to log a trace of their
-activity as they attempt to locate your drive.
-
-Use 'dmesg' to capture a log of all the PARIDE messages (any messages
-beginning with paride:, a protocol module's name or a driver's name) and
-include that with your bug report.  You can submit a bug report in one
-of two ways.  Either send it directly to the author of the PARIDE suite,
-by e-mail to grant@torque.net, or join the linux-parport mailing list
-and post your report there.
-
-3.5  For more information or help
----------------------------------
-
-You can join the linux-parport mailing list by sending a mail message
-to:
-
-		linux-parport-request@torque.net
-
-with the single word::
-
-		subscribe
-
-in the body of the mail message (not in the subject line).   Please be
-sure that your mail program is correctly set up when you do this,  as
-the list manager is a robot that will subscribe you using the reply
-address in your mail headers.  REMOVE any anti-spam gimmicks you may
-have in your mail headers, when sending mail to the list server.
-
-You might also find some useful information on the linux-parport
-web pages (although they are not always up to date) at
-
-	http://web.archive.org/web/%2E/http://www.torque.net/parport/
+your pata_parport drivers as modules, and arrange to do the printer reset
+before loading the pata_parport drivers.
diff --git a/Documentation/admin-guide/blockdev/zram.rst b/Documentation/admin-guide/blockdev/zram.rst
index 3e11926a4df9..e4551579cb12 100644
--- a/Documentation/admin-guide/blockdev/zram.rst
+++ b/Documentation/admin-guide/blockdev/zram.rst
@@ -315,8 +315,8 @@ To use the feature, admin should set up backing device via::
 
 	echo /dev/sda5 > /sys/block/zramX/backing_dev
 
-before disksize setting. It supports only partition at this moment.
-If admin wants to use incompressible page writeback, they could do via::
+before disksize setting. It supports only partitions at this moment.
+If admin wants to use incompressible page writeback, they could do it via::
 
 	echo huge > /sys/block/zramX/writeback
 
@@ -341,10 +341,20 @@ Admin can request writeback of those idle pages at right timing via::
 
 	echo idle > /sys/block/zramX/writeback
 
-With the command, zram writeback idle pages from memory to the storage.
+With the command, zram will writeback idle pages from memory to the storage.
 
-If admin want to write a specific page in zram device to backing device,
-they could write a page index into the interface.
+Additionally, if a user choose to writeback only huge and idle pages
+this can be accomplished with::
+
+        echo huge_idle > /sys/block/zramX/writeback
+
+If a user chooses to writeback only incompressible pages (pages that none of
+algorithms can compress) this can be accomplished with::
+
+	echo incompressible > /sys/block/zramX/writeback
+
+If an admin wants to write a specific page in zram device to the backing device,
+they could write a page index into the interface::
 
 	echo "page_index=1251" > /sys/block/zramX/writeback
 
@@ -354,7 +364,7 @@ to guarantee storage health for entire product life.
 
 To overcome the concern, zram supports "writeback_limit" feature.
 The "writeback_limit_enable"'s default value is 0 so that it doesn't limit
-any writeback. IOW, if admin wants to apply writeback budget, he should
+any writeback. IOW, if admin wants to apply writeback budget, they should
 enable writeback_limit_enable via::
 
 	$ echo 1 > /sys/block/zramX/writeback_limit_enable
@@ -365,7 +375,7 @@ until admin sets the budget via /sys/block/zramX/writeback_limit.
 (If admin doesn't enable writeback_limit_enable, writeback_limit's value
 assigned via /sys/block/zramX/writeback_limit is meaningless.)
 
-If admin want to limit writeback as per-day 400M, he could do it
+If admin wants to limit writeback as per-day 400M, they could do it
 like below::
 
 	$ MB_SHIFT=20
@@ -375,16 +385,16 @@ like below::
 	$ echo 1 > /sys/block/zram0/writeback_limit_enable
 
 If admins want to allow further write again once the budget is exhausted,
-he could do it like below::
+they could do it like below::
 
 	$ echo $((400<<MB_SHIFT>>4K_SHIFT)) > \
 		/sys/block/zram0/writeback_limit
 
-If admin wants to see remaining writeback budget since last set::
+If an admin wants to see the remaining writeback budget since last set::
 
 	$ cat /sys/block/zramX/writeback_limit
 
-If admin want to disable writeback limit, he could do::
+If an admin wants to disable writeback limit, they could do::
 
 	$ echo 0 > /sys/block/zramX/writeback_limit_enable
 
@@ -393,9 +403,90 @@ system reboot, echo 1 > /sys/block/zramX/reset) so keeping how many of
 writeback happened until you reset the zram to allocate extra writeback
 budget in next setting is user's job.
 
-If admin wants to measure writeback count in a certain period, he could
+If admin wants to measure writeback count in a certain period, they could
 know it via /sys/block/zram0/bd_stat's 3rd column.
 
+recompression
+-------------
+
+With CONFIG_ZRAM_MULTI_COMP, zram can recompress pages using alternative
+(secondary) compression algorithms. The basic idea is that alternative
+compression algorithm can provide better compression ratio at a price of
+(potentially) slower compression/decompression speeds. Alternative compression
+algorithm can, for example, be more successful compressing huge pages (those
+that default algorithm failed to compress). Another application is idle pages
+recompression - pages that are cold and sit in the memory can be recompressed
+using more effective algorithm and, hence, reduce zsmalloc memory usage.
+
+With CONFIG_ZRAM_MULTI_COMP, zram supports up to 4 compression algorithms:
+one primary and up to 3 secondary ones. Primary zram compressor is explained
+in "3) Select compression algorithm", secondary algorithms are configured
+using recomp_algorithm device attribute.
+
+Example:::
+
+	#show supported recompression algorithms
+	cat /sys/block/zramX/recomp_algorithm
+	#1: lzo lzo-rle lz4 lz4hc [zstd]
+	#2: lzo lzo-rle lz4 [lz4hc] zstd
+
+Alternative compression algorithms are sorted by priority. In the example
+above, zstd is used as the first alternative algorithm, which has priority
+of 1, while lz4hc is configured as a compression algorithm with priority 2.
+Alternative compression algorithm's priority is provided during algorithms
+configuration:::
+
+	#select zstd recompression algorithm, priority 1
+	echo "algo=zstd priority=1" > /sys/block/zramX/recomp_algorithm
+
+	#select deflate recompression algorithm, priority 2
+	echo "algo=deflate priority=2" > /sys/block/zramX/recomp_algorithm
+
+Another device attribute that CONFIG_ZRAM_MULTI_COMP enables is recompress,
+which controls recompression.
+
+Examples:::
+
+	#IDLE pages recompression is activated by `idle` mode
+	echo "type=idle" > /sys/block/zramX/recompress
+
+	#HUGE pages recompression is activated by `huge` mode
+	echo "type=huge" > /sys/block/zram0/recompress
+
+	#HUGE_IDLE pages recompression is activated by `huge_idle` mode
+	echo "type=huge_idle" > /sys/block/zramX/recompress
+
+The number of idle pages can be significant, so user-space can pass a size
+threshold (in bytes) to the recompress knob: zram will recompress only pages
+of equal or greater size:::
+
+	#recompress all pages larger than 3000 bytes
+	echo "threshold=3000" > /sys/block/zramX/recompress
+
+	#recompress idle pages larger than 2000 bytes
+	echo "type=idle threshold=2000" > /sys/block/zramX/recompress
+
+Recompression of idle pages requires memory tracking.
+
+During re-compression for every page, that matches re-compression criteria,
+ZRAM iterates the list of registered alternative compression algorithms in
+order of their priorities. ZRAM stops either when re-compression was
+successful (re-compressed object is smaller in size than the original one)
+and matches re-compression criteria (e.g. size threshold) or when there are
+no secondary algorithms left to try. If none of the secondary algorithms can
+successfully re-compressed the page such a page is marked as incompressible,
+so ZRAM will not attempt to re-compress it in the future.
+
+This re-compression behaviour, when it iterates through the list of
+registered compression algorithms, increases our chances of finding the
+algorithm that successfully compresses a particular page. Sometimes, however,
+it is convenient (and sometimes even necessary) to limit recompression to
+only one particular algorithm so that it will not try any other algorithms.
+This can be achieved by providing a algo=NAME parameter:::
+
+	#use zstd algorithm only (if registered)
+	echo "type=huge algo=zstd" > /sys/block/zramX/recompress
+
 memory tracking
 ===============
 
@@ -406,9 +497,11 @@ pages of the process with*pagemap.
 If you enable the feature, you could see block state via
 /sys/kernel/debug/zram/zram0/block_state". The output is as follows::
 
-	  300    75.033841 .wh.
-	  301    63.806904 s...
-	  302    63.806919 ..hi
+	  300    75.033841 .wh...
+	  301    63.806904 s.....
+	  302    63.806919 ..hi..
+	  303    62.801919 ....r.
+	  304   146.781902 ..hi.n
 
 First column
 	zram's block index.
@@ -425,6 +518,10 @@ Third column
 		huge page
 	i:
 		idle page
+	r:
+		recompressed page (secondary compression algorithm)
+	n:
+		none (including secondary) of algorithms could compress it
 
 First line of above example says 300th block is accessed at 75.033841sec
 and the block's state is huge so it is written back to the backing
diff --git a/Documentation/admin-guide/bootconfig.rst b/Documentation/admin-guide/bootconfig.rst
index a1860fc0ca88..91339efdcb54 100644
--- a/Documentation/admin-guide/bootconfig.rst
+++ b/Documentation/admin-guide/bootconfig.rst
@@ -158,9 +158,15 @@ Each key-value pair is shown in each line with following style::
 Boot Kernel With a Boot Config
 ==============================
 
-Since the boot configuration file is loaded with initrd, it will be added
-to the end of the initrd (initramfs) image file with padding, size,
-checksum and 12-byte magic word as below.
+There are two options to boot the kernel with bootconfig: attaching the
+bootconfig to the initrd image or embedding it in the kernel itself.
+
+Attaching a Boot Config to Initrd
+---------------------------------
+
+Since the boot configuration file is loaded with initrd by default,
+it will be added to the end of the initrd (initramfs) image file with
+padding, size, checksum and 12-byte magic word as below.
 
 [initrd][bootconfig][padding][size(le32)][checksum(le32)][#BOOTCONFIG\n]
 
@@ -195,7 +201,30 @@ To remove the config from the image, you can use -d option as below::
 
 Then add "bootconfig" on the normal kernel command line to tell the
 kernel to look for the bootconfig at the end of the initrd file.
+Alternatively, build your kernel with the ``CONFIG_BOOT_CONFIG_FORCE``
+Kconfig option selected.
+
+Embedding a Boot Config into Kernel
+-----------------------------------
+
+If you can not use initrd, you can also embed the bootconfig file in the
+kernel by Kconfig options. In this case, you need to recompile the kernel
+with the following configs::
+
+ CONFIG_BOOT_CONFIG_EMBED=y
+ CONFIG_BOOT_CONFIG_EMBED_FILE="/PATH/TO/BOOTCONFIG/FILE"
+
+``CONFIG_BOOT_CONFIG_EMBED_FILE`` requires an absolute path or a relative
+path to the bootconfig file from source tree or object tree.
+The kernel will embed it as the default bootconfig.
+
+Just as when attaching the bootconfig to the initrd, you need ``bootconfig``
+option on the kernel command line to enable the embedded bootconfig, or,
+alternatively, build your kernel with the ``CONFIG_BOOT_CONFIG_FORCE``
+Kconfig option selected.
 
+Note that even if you set this option, you can override the embedded
+bootconfig by another bootconfig which attached to the initrd.
 
 Kernel parameters via Boot Config
 =================================
@@ -204,7 +233,7 @@ In addition to the kernel command line, the boot config can be used for
 passing the kernel parameters. All the key-value pairs under ``kernel``
 key will be passed to kernel cmdline directly. Moreover, the key-value
 pairs under ``init`` will be passed to init process via the cmdline.
-The parameters are concatinated with user-given kernel cmdline string
+The parameters are concatenated with user-given kernel cmdline string
 as the following order, so that the command line parameter can override
 bootconfig parameters (this depends on how the subsystem handles parameters
 but in general, earlier parameter will be overwritten by later one.)::
diff --git a/Documentation/admin-guide/cgroup-v1/blkio-controller.rst b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
index 16253eda192e..dabb80cdd25a 100644
--- a/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
+++ b/Documentation/admin-guide/cgroup-v1/blkio-controller.rst
@@ -106,7 +106,7 @@ Proportional weight policy files
           see Documentation/block/bfq-iosched.rst.
 
   blkio.bfq.weight_device
-          Specifes per cgroup per device weights, overriding the default group
+          Specifies per cgroup per device weights, overriding the default group
           weight. For more details, see Documentation/block/bfq-iosched.rst.
 
 	  Following is the format::
diff --git a/Documentation/admin-guide/cgroup-v1/cgroups.rst b/Documentation/admin-guide/cgroup-v1/cgroups.rst
index b0688011ed06..9343148ee993 100644
--- a/Documentation/admin-guide/cgroup-v1/cgroups.rst
+++ b/Documentation/admin-guide/cgroup-v1/cgroups.rst
@@ -80,6 +80,8 @@ access. For example, cpusets (see Documentation/admin-guide/cgroup-v1/cpusets.rs
 you to associate a set of CPUs and a set of memory nodes with the
 tasks in each cgroup.
 
+.. _cgroups-why-needed:
+
 1.2 Why are cgroups needed ?
 ----------------------------
 
diff --git a/Documentation/admin-guide/cgroup-v1/cpusets.rst b/Documentation/admin-guide/cgroup-v1/cpusets.rst
index 5d844ed4df69..ae646d621a8a 100644
--- a/Documentation/admin-guide/cgroup-v1/cpusets.rst
+++ b/Documentation/admin-guide/cgroup-v1/cpusets.rst
@@ -719,7 +719,7 @@ There are ways to query or modify cpusets:
    cat, rmdir commands from the shell, or their equivalent from C.
  - via the C library libcpuset.
  - via the C library libcgroup.
-   (http://sourceforge.net/projects/libcg/)
+   (https://github.com/libcgroup/libcgroup/)
  - via the python application cset.
    (http://code.google.com/p/cpuset/)
 
diff --git a/Documentation/admin-guide/cgroup-v1/hugetlb.rst b/Documentation/admin-guide/cgroup-v1/hugetlb.rst
index 338f2c7d7a1c..0fa724d82abb 100644
--- a/Documentation/admin-guide/cgroup-v1/hugetlb.rst
+++ b/Documentation/admin-guide/cgroup-v1/hugetlb.rst
@@ -29,12 +29,14 @@ Brief summary of control files::
  hugetlb.<hugepagesize>.max_usage_in_bytes             # show max "hugepagesize" hugetlb  usage recorded
  hugetlb.<hugepagesize>.usage_in_bytes                 # show current usage for "hugepagesize" hugetlb
  hugetlb.<hugepagesize>.failcnt                        # show the number of allocation failure due to HugeTLB usage limit
+ hugetlb.<hugepagesize>.numa_stat                      # show the numa information of the hugetlb memory charged to this cgroup
 
 For a system supporting three hugepage sizes (64k, 32M and 1G), the control
 files include::
 
   hugetlb.1GB.limit_in_bytes
   hugetlb.1GB.max_usage_in_bytes
+  hugetlb.1GB.numa_stat
   hugetlb.1GB.usage_in_bytes
   hugetlb.1GB.failcnt
   hugetlb.1GB.rsvd.limit_in_bytes
@@ -43,6 +45,7 @@ files include::
   hugetlb.1GB.rsvd.failcnt
   hugetlb.64KB.limit_in_bytes
   hugetlb.64KB.max_usage_in_bytes
+  hugetlb.64KB.numa_stat
   hugetlb.64KB.usage_in_bytes
   hugetlb.64KB.failcnt
   hugetlb.64KB.rsvd.limit_in_bytes
@@ -51,6 +54,7 @@ files include::
   hugetlb.64KB.rsvd.failcnt
   hugetlb.32MB.limit_in_bytes
   hugetlb.32MB.max_usage_in_bytes
+  hugetlb.32MB.numa_stat
   hugetlb.32MB.usage_in_bytes
   hugetlb.32MB.failcnt
   hugetlb.32MB.rsvd.limit_in_bytes
diff --git a/Documentation/admin-guide/cgroup-v1/memcg_test.rst b/Documentation/admin-guide/cgroup-v1/memcg_test.rst
index 45b94f7b3beb..a402359abb99 100644
--- a/Documentation/admin-guide/cgroup-v1/memcg_test.rst
+++ b/Documentation/admin-guide/cgroup-v1/memcg_test.rst
@@ -97,7 +97,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 =============
 
 	Page Cache is charged at
-	- add_to_page_cache_locked().
+	- filemap_add_folio().
 
 	The logic is very clear. (About migration, see below)
 
diff --git a/Documentation/admin-guide/cgroup-v1/memory.rst b/Documentation/admin-guide/cgroup-v1/memory.rst
index faac50149a22..47d1d7d932a8 100644
--- a/Documentation/admin-guide/cgroup-v1/memory.rst
+++ b/Documentation/admin-guide/cgroup-v1/memory.rst
@@ -2,18 +2,18 @@
 Memory Resource Controller
 ==========================
 
-NOTE:
+.. caution::
       This document is hopelessly outdated and it asks for a complete
       rewrite. It still contains a useful information so we are keeping it
       here but make sure to check the current code if you need a deeper
       understanding.
 
-NOTE:
+.. note::
       The Memory Resource Controller has generically been referred to as the
       memory controller in this document. Do not confuse memory controller
       used here with the memory controller that is used in hardware.
 
-(For editors) In this document:
+.. hint::
       When we mention a cgroup (cgroupfs's directory) with memory controller,
       we call it "memory cgroup". When you see git-log and source code, you'll
       see patch's title and function names tend to use "memcg".
@@ -23,7 +23,7 @@ Benefits and Purpose of the memory controller
 =============================================
 
 The memory controller isolates the memory behaviour of a group of tasks
-from the rest of the system. The article on LWN [12] mentions some probable
+from the rest of the system. The article on LWN [12]_ mentions some probable
 uses of the memory controller. The memory controller can be used to
 
 a. Isolate an application or a group of applications
@@ -55,7 +55,8 @@ Features:
  - Root cgroup has no limit controls.
 
  Kernel memory support is a work in progress, and the current version provides
- basically functionality. (See Section 2.7)
+ basically functionality. (See :ref:`section 2.7
+ <cgroup-v1-memory-kernel-extension>`)
 
 Brief summary of control files.
 
@@ -64,6 +65,7 @@ Brief summary of control files.
 				     threads
  cgroup.procs			     show list of processes
  cgroup.event_control		     an interface for event_fd()
+				     This knob is not available on CONFIG_PREEMPT_RT systems.
  memory.usage_in_bytes		     show current usage for memory
 				     (See 5.5 for details)
  memory.memsw.usage_in_bytes	     show current usage for memory+Swap
@@ -75,6 +77,7 @@ Brief summary of control files.
  memory.max_usage_in_bytes	     show max memory usage recorded
  memory.memsw.max_usage_in_bytes     show max memory+Swap usage recorded
  memory.soft_limit_in_bytes	     set/show soft limit of memory usage
+				     This knob is not available on CONFIG_PREEMPT_RT systems.
  memory.stat			     show various statistics
  memory.use_hierarchy		     set/show hierarchical account enabled
                                      This knob is deprecated and shouldn't be
@@ -84,6 +87,8 @@ Brief summary of control files.
  memory.swappiness		     set/show swappiness parameter of vmscan
 				     (See sysctl's vm.swappiness)
  memory.move_charge_at_immigrate     set/show controls of moving charges
+                                     This knob is deprecated and shouldn't be
+                                     used.
  memory.oom_control		     set/show oom controls.
  memory.numa_stat		     show the number of memory usage per numa
 				     node
@@ -105,16 +110,16 @@ Brief summary of control files.
 ==========
 
 The memory controller has a long history. A request for comments for the memory
-controller was posted by Balbir Singh [1]. At the time the RFC was posted
+controller was posted by Balbir Singh [1]_. At the time the RFC was posted
 there were several implementations for memory control. The goal of the
 RFC was to build consensus and agreement for the minimal features required
-for memory control. The first RSS controller was posted by Balbir Singh[2]
-in Feb 2007. Pavel Emelianov [3][4][5] has since posted three versions of the
-RSS controller. At OLS, at the resource management BoF, everyone suggested
-that we handle both page cache and RSS together. Another request was raised
-to allow user space handling of OOM. The current memory controller is
+for memory control. The first RSS controller was posted by Balbir Singh [2]_
+in Feb 2007. Pavel Emelianov [3]_ [4]_ [5]_ has since posted three versions
+of the RSS controller. At OLS, at the resource management BoF, everyone
+suggested that we handle both page cache and RSS together. Another request was
+raised to allow user space handling of OOM. The current memory controller is
 at version 6; it combines both mapped (RSS) and unmapped Page
-Cache Control [11].
+Cache Control [11]_.
 
 2. Memory Control
 =================
@@ -145,7 +150,8 @@ specific data structure (mem_cgroup) associated with it.
 2.2. Accounting
 ---------------
 
-::
+.. code-block::
+   :caption: Figure 1: Hierarchy of Accounting
 
 		+--------------------+
 		|  mem_cgroup        |
@@ -165,7 +171,6 @@ specific data structure (mem_cgroup) associated with it.
            |               |           |               |
            +---------------+           +---------------+
 
-             (Figure 1: Hierarchy of Accounting)
 
 
 Figure 1 shows the important aspects of the controller
@@ -219,8 +224,9 @@ behind this approach is that a cgroup that aggressively uses a shared
 page will eventually get charged for it (once it is uncharged from
 the cgroup that brought it in -- this will happen on memory pressure).
 
-But see section 8.2: when moving a task to another cgroup, its pages may
-be recharged to the new cgroup, if move_charge_at_immigrate has been chosen.
+But see :ref:`section 8.2 <cgroup-v1-memory-movable-charges>` when moving a
+task to another cgroup, its pages may be recharged to the new cgroup, if
+move_charge_at_immigrate has been chosen.
 
 2.4 Swap Extension
 --------------------------------------
@@ -242,7 +248,8 @@ In this case, setting memsw.limit_in_bytes=3G will prevent bad use of swap.
 By using the memsw limit, you can avoid system OOM which can be caused by swap
 shortage.
 
-**why 'memory+swap' rather than swap**
+2.4.1 why 'memory+swap' rather than swap
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 The global LRU(kswapd) can swap out arbitrary pages. Swap-out means
 to move account from memory to swap...there is no change in usage of
@@ -250,7 +257,8 @@ memory+swap. In other words, when we want to limit the usage of swap without
 affecting global LRU, memory+swap limit is better than just limiting swap from
 an OS point of view.
 
-**What happens when a cgroup hits memory.memsw.limit_in_bytes**
+2.4.2. What happens when a cgroup hits memory.memsw.limit_in_bytes
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 When a cgroup hits memory.memsw.limit_in_bytes, it's useless to do swap-out
 in this cgroup. Then, swap-out will not be done by cgroup routine and file
@@ -266,26 +274,26 @@ global VM. When a cgroup goes over its limit, we first try
 to reclaim memory from the cgroup so as to make space for the new
 pages that the cgroup has touched. If the reclaim is unsuccessful,
 an OOM routine is invoked to select and kill the bulkiest task in the
-cgroup. (See 10. OOM Control below.)
+cgroup. (See :ref:`10. OOM Control <cgroup-v1-memory-oom-control>` below.)
 
 The reclaim algorithm has not been modified for cgroups, except that
 pages that are selected for reclaiming come from the per-cgroup LRU
 list.
 
-NOTE:
-  Reclaim does not work for the root cgroup, since we cannot set any
-  limits on the root cgroup.
+.. note::
+   Reclaim does not work for the root cgroup, since we cannot set any
+   limits on the root cgroup.
 
-Note2:
-  When panic_on_oom is set to "2", the whole system will panic.
+.. note::
+   When panic_on_oom is set to "2", the whole system will panic.
 
 When oom event notifier is registered, event will be delivered.
-(See oom_control section)
+(See :ref:`oom_control <cgroup-v1-memory-oom-control>` section)
 
 2.6 Locking
 -----------
 
-Lock order is as follows:
+Lock order is as follows::
 
   Page lock (PG_locked bit of page->flags)
     mm->page_table_lock or split pte_lock
@@ -297,7 +305,9 @@ Per-node-per-memcgroup LRU (cgroup's private LRU) is guarded by
 lruvec->lru_lock; PG_lru bit of page->flags is cleared before
 isolating a page from its LRU under lruvec->lru_lock.
 
-2.7 Kernel Memory Extension (CONFIG_MEMCG_KMEM)
+.. _cgroup-v1-memory-kernel-extension:
+
+2.7 Kernel Memory Extension
 -----------------------------------------------
 
 With the Kernel memory extension, the Memory Controller is able to limit
@@ -365,10 +375,10 @@ U != 0, K < U:
     never greater than the total memory, and freely set U at the cost of his
     QoS.
 
-WARNING:
-    In the current implementation, memory reclaim will NOT be
-    triggered for a cgroup when it hits K while staying below U, which makes
-    this setup impractical.
+    .. warning::
+       In the current implementation, memory reclaim will NOT be triggered for
+       a cgroup when it hits K while staying below U, which makes this setup
+       impractical.
 
 U != 0, K >= U:
     Since kmem charges will also be fed to the user counter and reclaim will be
@@ -379,47 +389,41 @@ U != 0, K >= U:
 3. User Interface
 =================
 
-3.0. Configuration
-------------------
-
-a. Enable CONFIG_CGROUPS
-b. Enable CONFIG_MEMCG
-c. Enable CONFIG_MEMCG_SWAP (to use swap extension)
-d. Enable CONFIG_MEMCG_KMEM (to use kmem extension)
+To use the user interface:
 
-3.1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?)
--------------------------------------------------------------------
-
-::
+1. Enable CONFIG_CGROUPS and CONFIG_MEMCG options
+2. Prepare the cgroups (see :ref:`Why are cgroups needed?
+   <cgroups-why-needed>` for the background information)::
 
 	# mount -t tmpfs none /sys/fs/cgroup
 	# mkdir /sys/fs/cgroup/memory
 	# mount -t cgroup none /sys/fs/cgroup/memory -o memory
 
-3.2. Make the new group and move bash into it::
+3. Make the new group and move bash into it::
 
 	# mkdir /sys/fs/cgroup/memory/0
 	# echo $$ > /sys/fs/cgroup/memory/0/tasks
 
-Since now we're in the 0 cgroup, we can alter the memory limit::
+4. Since now we're in the 0 cgroup, we can alter the memory limit::
 
 	# echo 4M > /sys/fs/cgroup/memory/0/memory.limit_in_bytes
 
-NOTE:
-  We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
-  mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes,
-  Gibibytes.)
+   The limit can now be queried::
+
+	# cat /sys/fs/cgroup/memory/0/memory.limit_in_bytes
+	4194304
 
-NOTE:
-  We can write "-1" to reset the ``*.limit_in_bytes(unlimited)``.
+.. note::
+   We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
+   mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes,
+   Gibibytes.)
 
-NOTE:
-  We cannot set limits on the root cgroup any more.
+.. note::
+   We can write "-1" to reset the ``*.limit_in_bytes(unlimited)``.
 
-::
+.. note::
+   We cannot set limits on the root cgroup any more.
 
-  # cat /sys/fs/cgroup/memory/0/memory.limit_in_bytes
-  4194304
 
 We can check the usage::
 
@@ -458,6 +462,8 @@ test because it has noise of shared objects/status.
 But the above two are testing extreme situations.
 Trying usual test under memory controller is always helpful.
 
+.. _cgroup-v1-memory-test-troubleshoot:
+
 4.1 Troubleshooting
 -------------------
 
@@ -470,8 +476,11 @@ terminated by the OOM killer. There are several causes for this:
 A sync followed by echo 1 > /proc/sys/vm/drop_caches will help get rid of
 some of the pages cached in the cgroup (page cache pages).
 
-To know what happens, disabling OOM_Kill as per "10. OOM Control" (below) and
-seeing what happens will be helpful.
+To know what happens, disabling OOM_Kill as per :ref:`"10. OOM Control"
+<cgroup-v1-memory-oom-control>` (below) and seeing what happens will be
+helpful.
+
+.. _cgroup-v1-memory-test-task-migration:
 
 4.2 Task migration
 ------------------
@@ -482,15 +491,16 @@ remain charged to it, the charge is dropped when the page is freed or
 reclaimed.
 
 You can move charges of a task along with task migration.
-See 8. "Move charges at task migration"
+See :ref:`8. "Move charges at task migration" <cgroup-v1-memory-move-charges>`
 
 4.3 Removing a cgroup
 ---------------------
 
-A cgroup can be removed by rmdir, but as discussed in sections 4.1 and 4.2, a
-cgroup might have some charge associated with it, even though all
-tasks have migrated away from it. (because we charge against pages, not
-against tasks.)
+A cgroup can be removed by rmdir, but as discussed in :ref:`sections 4.1
+<cgroup-v1-memory-test-troubleshoot>` and :ref:`4.2
+<cgroup-v1-memory-test-task-migration>`, a cgroup might have some charge
+associated with it, even though all tasks have migrated away from it. (because
+we charge against pages, not against tasks.)
 
 We move the stats to parent, and no change on the charge except uncharging
 from the child.
@@ -519,66 +529,66 @@ will be charged as a new owner of it.
 5.2 stat file
 -------------
 
-memory.stat file includes following statistics
-
-per-memory cgroup local status
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-=============== ===============================================================
-cache		# of bytes of page cache memory.
-rss		# of bytes of anonymous and swap cache memory (includes
-		transparent hugepages).
-rss_huge	# of bytes of anonymous transparent hugepages.
-mapped_file	# of bytes of mapped file (includes tmpfs/shmem)
-pgpgin		# of charging events to the memory cgroup. The charging
-		event happens each time a page is accounted as either mapped
-		anon page(RSS) or cache page(Page Cache) to the cgroup.
-pgpgout		# of uncharging events to the memory cgroup. The uncharging
-		event happens each time a page is unaccounted from the cgroup.
-swap		# of bytes of swap usage
-dirty		# of bytes that are waiting to get written back to the disk.
-writeback	# of bytes of file/anon cache that are queued for syncing to
-		disk.
-inactive_anon	# of bytes of anonymous and swap cache memory on inactive
-		LRU list.
-active_anon	# of bytes of anonymous and swap cache memory on active
-		LRU list.
-inactive_file	# of bytes of file-backed memory on inactive LRU list.
-active_file	# of bytes of file-backed memory on active LRU list.
-unevictable	# of bytes of memory that cannot be reclaimed (mlocked etc).
-=============== ===============================================================
-
-status considering hierarchy (see memory.use_hierarchy settings)
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-========================= ===================================================
-hierarchical_memory_limit # of bytes of memory limit with regard to hierarchy
-			  under which the memory cgroup is
-hierarchical_memsw_limit  # of bytes of memory+swap limit with regard to
-			  hierarchy under which memory cgroup is.
-
-total_<counter>		  # hierarchical version of <counter>, which in
-			  addition to the cgroup's own value includes the
-			  sum of all hierarchical children's values of
-			  <counter>, i.e. total_cache
-========================= ===================================================
-
-The following additional stats are dependent on CONFIG_DEBUG_VM
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-========================= ========================================
-recent_rotated_anon	  VM internal parameter. (see mm/vmscan.c)
-recent_rotated_file	  VM internal parameter. (see mm/vmscan.c)
-recent_scanned_anon	  VM internal parameter. (see mm/vmscan.c)
-recent_scanned_file	  VM internal parameter. (see mm/vmscan.c)
-========================= ========================================
-
-Memo:
+memory.stat file includes following statistics:
+
+  * per-memory cgroup local status
+
+    =============== ===============================================================
+    cache           # of bytes of page cache memory.
+    rss             # of bytes of anonymous and swap cache memory (includes
+                    transparent hugepages).
+    rss_huge        # of bytes of anonymous transparent hugepages.
+    mapped_file     # of bytes of mapped file (includes tmpfs/shmem)
+    pgpgin          # of charging events to the memory cgroup. The charging
+                    event happens each time a page is accounted as either mapped
+                    anon page(RSS) or cache page(Page Cache) to the cgroup.
+    pgpgout         # of uncharging events to the memory cgroup. The uncharging
+                    event happens each time a page is unaccounted from the
+                    cgroup.
+    swap            # of bytes of swap usage
+    dirty           # of bytes that are waiting to get written back to the disk.
+    writeback       # of bytes of file/anon cache that are queued for syncing to
+                    disk.
+    inactive_anon   # of bytes of anonymous and swap cache memory on inactive
+                    LRU list.
+    active_anon     # of bytes of anonymous and swap cache memory on active
+                    LRU list.
+    inactive_file   # of bytes of file-backed memory and MADV_FREE anonymous
+                    memory (LazyFree pages) on inactive LRU list.
+    active_file     # of bytes of file-backed memory on active LRU list.
+    unevictable     # of bytes of memory that cannot be reclaimed (mlocked etc).
+    =============== ===============================================================
+
+  * status considering hierarchy (see memory.use_hierarchy settings):
+
+    ========================= ===================================================
+    hierarchical_memory_limit # of bytes of memory limit with regard to
+                              hierarchy
+                              under which the memory cgroup is
+    hierarchical_memsw_limit  # of bytes of memory+swap limit with regard to
+                              hierarchy under which memory cgroup is.
+
+    total_<counter>           # hierarchical version of <counter>, which in
+                              addition to the cgroup's own value includes the
+                              sum of all hierarchical children's values of
+                              <counter>, i.e. total_cache
+    ========================= ===================================================
+
+  * additional vm parameters (depends on CONFIG_DEBUG_VM):
+
+    ========================= ========================================
+    recent_rotated_anon       VM internal parameter. (see mm/vmscan.c)
+    recent_rotated_file       VM internal parameter. (see mm/vmscan.c)
+    recent_scanned_anon       VM internal parameter. (see mm/vmscan.c)
+    recent_scanned_file       VM internal parameter. (see mm/vmscan.c)
+    ========================= ========================================
+
+.. hint::
 	recent_rotated means recent frequency of LRU rotation.
 	recent_scanned means recent # of scans to LRU.
 	showing for better debug please see the code for meanings.
 
-Note:
+.. note::
 	Only anonymous and swap cache memory is listed as part of 'rss' stat.
 	This should not be confused with the true 'resident set size' or the
 	amount of physical memory used by the cgroup.
@@ -709,15 +719,25 @@ If we want to change this to 1G, we can at any time use::
 
 	# echo 1G > memory.soft_limit_in_bytes
 
-NOTE1:
+.. note::
        Soft limits take effect over a long period of time, since they involve
        reclaiming memory for balancing between memory cgroups
-NOTE2:
+
+.. note::
        It is recommended to set the soft limit always below the hard limit,
        otherwise the hard limit will take precedence.
 
-8. Move charges at task migration
-=================================
+.. _cgroup-v1-memory-move-charges:
+
+8. Move charges at task migration (DEPRECATED!)
+===============================================
+
+THIS IS DEPRECATED!
+
+It's expensive and unreliable! It's better practice to launch workload
+tasks directly from inside their target cgroup. Use dedicated workload
+cgroups to allow fine-grained policy adjustments without having to
+move physical pages between control domains.
 
 Users can move charges associated with a task along with task migration, that
 is, uncharge task's pages from the old cgroup and charge them to the new cgroup.
@@ -734,23 +754,29 @@ If you want to enable it::
 
 	# echo (some positive value) > memory.move_charge_at_immigrate
 
-Note:
+.. note::
       Each bits of move_charge_at_immigrate has its own meaning about what type
-      of charges should be moved. See 8.2 for details.
-Note:
+      of charges should be moved. See :ref:`section 8.2
+      <cgroup-v1-memory-movable-charges>` for details.
+
+.. note::
       Charges are moved only when you move mm->owner, in other words,
       a leader of a thread group.
-Note:
+
+.. note::
       If we cannot find enough space for the task in the destination cgroup, we
       try to make space by reclaiming memory. Task migration may fail if we
       cannot make enough space.
-Note:
+
+.. note::
       It can take several seconds if you move charges much.
 
 And if you want disable it again::
 
 	# echo 0 > memory.move_charge_at_immigrate
 
+.. _cgroup-v1-memory-movable-charges:
+
 8.2 Type of charges which can be moved
 --------------------------------------
 
@@ -800,6 +826,8 @@ threshold in any direction.
 
 It's applicable for root and non-root cgroup.
 
+.. _cgroup-v1-memory-oom-control:
+
 10. OOM Control
 ===============
 
@@ -955,15 +983,16 @@ commented and discussed quite extensively in the community.
 References
 ==========
 
-1. Singh, Balbir. RFC: Memory Controller, http://lwn.net/Articles/206697/
-2. Singh, Balbir. Memory Controller (RSS Control),
+.. [1] Singh, Balbir. RFC: Memory Controller, http://lwn.net/Articles/206697/
+.. [2] Singh, Balbir. Memory Controller (RSS Control),
    http://lwn.net/Articles/222762/
-3. Emelianov, Pavel. Resource controllers based on process cgroups
+.. [3] Emelianov, Pavel. Resource controllers based on process cgroups
    https://lore.kernel.org/r/45ED7DEC.7010403@sw.ru
-4. Emelianov, Pavel. RSS controller based on process cgroups (v2)
+.. [4] Emelianov, Pavel. RSS controller based on process cgroups (v2)
    https://lore.kernel.org/r/461A3010.90403@sw.ru
-5. Emelianov, Pavel. RSS controller based on process cgroups (v3)
+.. [5] Emelianov, Pavel. RSS controller based on process cgroups (v3)
    https://lore.kernel.org/r/465D9739.8070209@openvz.org
+
 6. Menage, Paul. Control Groups v10, http://lwn.net/Articles/236032/
 7. Vaidyanathan, Srinivasan, Control Groups: Pagecache accounting and control
    subsystem (v3), http://lwn.net/Articles/235534/
@@ -973,7 +1002,8 @@ References
    https://lore.kernel.org/r/464D267A.50107@linux.vnet.ibm.com
 10. Singh, Balbir. Memory controller v6 test results,
     https://lore.kernel.org/r/20070819094658.654.84837.sendpatchset@balbir-laptop
-11. Singh, Balbir. Memory controller introduction (v6),
-    https://lore.kernel.org/r/20070817084228.26003.12568.sendpatchset@balbir-laptop
-12. Corbet, Jonathan, Controlling memory use in cgroups,
-    http://lwn.net/Articles/243795/
+
+.. [11] Singh, Balbir. Memory controller introduction (v6),
+   https://lore.kernel.org/r/20070817084228.26003.12568.sendpatchset@balbir-laptop
+.. [12] Corbet, Jonathan, Controlling memory use in cgroups,
+   http://lwn.net/Articles/243795/
diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst
index 4d8c27eca96b..f67c0829350b 100644
--- a/Documentation/admin-guide/cgroup-v2.rst
+++ b/Documentation/admin-guide/cgroup-v2.rst
@@ -184,6 +184,14 @@ cgroup v2 currently supports the following mount options.
 	ignored on non-init namespace mounts.  Please refer to the
 	Delegation section for details.
 
+  favordynmods
+        Reduce the latencies of dynamic cgroup modifications such as
+        task migrations and controller on/offs at the cost of making
+        hot path operations such as forks and exits more expensive.
+        The static usage pattern of creating a cgroup, enabling
+        controllers, and then seeding it with CLONE_INTO_CGROUP is
+        not affected by this option.
+
   memory_localevents
         Only populate memory.events with data for the current cgroup,
         and not any subtrees. This is legacy behaviour, the default
@@ -611,10 +619,12 @@ process migrations.
 and is an example of this type.
 
 
+.. _cgroupv2-limits-distributor:
+
 Limits
 ------
 
-A child can only consume upto the configured amount of the resource.
+A child can only consume up to the configured amount of the resource.
 Limits can be over-committed - the sum of the limits of children can
 exceed the amount of resource available to the parent.
 
@@ -627,15 +637,16 @@ process migrations.
 "io.max" limits the maximum BPS and/or IOPS that a cgroup can consume
 on an IO device and is an example of this type.
 
+.. _cgroupv2-protections-distributor:
 
 Protections
 -----------
 
-A cgroup is protected upto the configured amount of the resource
+A cgroup is protected up to the configured amount of the resource
 as long as the usages of all its ancestors are under their
 protected levels.  Protections can be hard guarantees or best effort
 soft boundaries.  Protections can also be over-committed in which case
-only upto the amount available to the parent is protected among
+only up to the amount available to the parent is protected among
 children.
 
 Protections are in the range [0, max] and defaults to 0, which is
@@ -968,6 +979,29 @@ All cgroup core files are prefixed with "cgroup."
 	killing cgroups is a process directed operation, i.e. it affects
 	the whole thread-group.
 
+  cgroup.pressure
+	A read-write single value file that allowed values are "0" and "1".
+	The default is "1".
+
+	Writing "0" to the file will disable the cgroup PSI accounting.
+	Writing "1" to the file will re-enable the cgroup PSI accounting.
+
+	This control attribute is not hierarchical, so disable or enable PSI
+	accounting in a cgroup does not affect PSI accounting in descendants
+	and doesn't need pass enablement via ancestors from root.
+
+	The reason this control attribute exists is that PSI accounts stalls for
+	each cgroup separately and aggregates it at each level of the hierarchy.
+	This may cause non-negligible overhead for some workloads when under
+	deep level of the hierarchy, in which case this control attribute can
+	be used to disable PSI accounting in the non-leaf cgroups.
+
+  irq.pressure
+	A read-write nested-keyed file.
+
+	Shows pressure stall information for IRQ/SOFTIRQ. See
+	:ref:`Documentation/accounting/psi.rst <psi>` for details.
+
 Controllers
 ===========
 
@@ -1016,6 +1050,8 @@ All time durations are in microseconds.
 	- nr_periods
 	- nr_throttled
 	- throttled_usec
+	- nr_bursts
+	- burst_usec
 
   cpu.weight
 	A read-write single value file which exists on non-root
@@ -1043,10 +1079,16 @@ All time durations are in microseconds.
 
 	  $MAX $PERIOD
 
-	which indicates that the group may consume upto $MAX in each
+	which indicates that the group may consume up to $MAX in each
 	$PERIOD duration.  "max" for $MAX indicates no limit.  If only
 	one number is written, $MAX is updated.
 
+  cpu.max.burst
+	A read-write single value file which exists on non-root
+	cgroups.  The default is "0".
+
+	The burst in the range [0, $MAX].
+
   cpu.pressure
 	A read-write nested-keyed file.
 
@@ -1200,6 +1242,41 @@ PAGE_SIZE multiple when read back.
 	high limit is used and monitored properly, this limit's
 	utility is limited to providing the final safety net.
 
+  memory.reclaim
+	A write-only nested-keyed file which exists for all cgroups.
+
+	This is a simple interface to trigger memory reclaim in the
+	target cgroup.
+
+	This file accepts a single key, the number of bytes to reclaim.
+	No nested keys are currently supported.
+
+	Example::
+
+	  echo "1G" > memory.reclaim
+
+	The interface can be later extended with nested keys to
+	configure the reclaim behavior. For example, specify the
+	type of memory to reclaim from (anon, file, ..).
+
+	Please note that the kernel can over or under reclaim from
+	the target cgroup. If less bytes are reclaimed than the
+	specified amount, -EAGAIN is returned.
+
+	Please note that the proactive reclaim (triggered by this
+	interface) is not meant to indicate memory pressure on the
+	memory cgroup. Therefore socket memory balancing triggered by
+	the memory reclaim normally is not exercised in this case.
+	This means that the networking layer will not adapt based on
+	reclaim induced by memory.reclaim.
+
+  memory.peak
+	A read-only single value file which exists on non-root
+	cgroups.
+
+	The max memory usage recorded for the cgroup and its
+	descendants since the creation of the cgroup.
+
   memory.oom.group
 	A read-write single value file which exists on non-root
 	cgroups.  The default value is "0".
@@ -1260,6 +1337,9 @@ PAGE_SIZE multiple when read back.
 		The number of processes belonging to this cgroup
 		killed by any kind of OOM killer.
 
+          oom_group_kill
+                The number of times a group OOM has occurred.
+
   memory.events.local
 	Similar to memory.events but the fields in the file are local
 	to the cgroup i.e. not hierarchical. The file modified event
@@ -1290,12 +1370,22 @@ PAGE_SIZE multiple when read back.
 		Amount of memory used to cache filesystem data,
 		including tmpfs and shared memory.
 
+	  kernel (npn)
+		Amount of total kernel memory, including
+		(kernel_stack, pagetables, percpu, vmalloc, slab) in
+		addition to other kernel memory use cases.
+
 	  kernel_stack
 		Amount of memory allocated to kernel stacks.
 
 	  pagetables
                 Amount of memory allocated for page tables.
 
+	  sec_pagetables
+		Amount of memory allocated for secondary page tables,
+		this currently includes KVM mmu allocations on x86
+		and arm64.
+
 	  percpu (npn)
 		Amount of memory used for storing per-cpu kernel
 		data structures.
@@ -1303,10 +1393,19 @@ PAGE_SIZE multiple when read back.
 	  sock (npn)
 		Amount of memory used in network transmission buffers
 
+	  vmalloc (npn)
+		Amount of memory used for vmap backed memory.
+
 	  shmem
 		Amount of cached filesystem data that is swap-backed,
 		such as tmpfs, shm segments, shared anonymous mmap()s
 
+	  zswap
+		Amount of memory consumed by the zswap compression backend.
+
+	  zswapped
+		Amount of application memory swapped out to zswap.
+
 	  file_mapped
 		Amount of cached filesystem data mapped with mmap()
 
@@ -1380,6 +1479,30 @@ PAGE_SIZE multiple when read back.
 	  workingset_nodereclaim
 		Number of times a shadow node has been reclaimed
 
+	  pgscan (npn)
+		Amount of scanned pages (in an inactive LRU list)
+
+	  pgsteal (npn)
+		Amount of reclaimed pages
+
+	  pgscan_kswapd (npn)
+		Amount of scanned pages by kswapd (in an inactive LRU list)
+
+	  pgscan_direct (npn)
+		Amount of scanned pages directly  (in an inactive LRU list)
+
+	  pgscan_khugepaged (npn)
+		Amount of scanned pages by khugepaged  (in an inactive LRU list)
+
+	  pgsteal_kswapd (npn)
+		Amount of reclaimed pages by kswapd
+
+	  pgsteal_direct (npn)
+		Amount of reclaimed pages directly
+
+	  pgsteal_khugepaged (npn)
+		Amount of reclaimed pages by khugepaged
+
 	  pgfault (npn)
 		Total number of page faults incurred
 
@@ -1389,12 +1512,6 @@ PAGE_SIZE multiple when read back.
 	  pgrefill (npn)
 		Amount of scanned pages (in an active LRU list)
 
-	  pgscan (npn)
-		Amount of scanned pages (in an inactive LRU list)
-
-	  pgsteal (npn)
-		Amount of reclaimed pages
-
 	  pgactivate (npn)
 		Amount of pages moved to the active LRU list
 
@@ -1497,6 +1614,21 @@ PAGE_SIZE multiple when read back.
 	higher than the limit for an extended period of time.  This
 	reduces the impact on the workload and memory management.
 
+  memory.zswap.current
+	A read-only single value file which exists on non-root
+	cgroups.
+
+	The total amount of memory consumed by the zswap compression
+	backend.
+
+  memory.zswap.max
+	A read-write single value file which exists on non-root
+	cgroups.  The default is "max".
+
+	Zswap usage hard limit. If a cgroup's zswap pool reaches this
+	limit, it will refuse to take any more stores before existing
+	entries fault back in or are written out to disk.
+
   memory.pressure
 	A read-only nested-keyed file.
 
@@ -1862,7 +1994,7 @@ IO Latency Interface Files
   io.latency
 	This takes a similar format as the other controllers.
 
-		"MAJOR:MINOR target=<target time in microseconds"
+		"MAJOR:MINOR target=<target time in microseconds>"
 
   io.stat
 	If the controller is enabled you will see extra stats in io.stat in
@@ -2090,75 +2222,93 @@ Cpuset Interface Files
 
 	It accepts only the following input values when written to.
 
-	  ========	================================
-	  "root"	a partition root
-	  "member"	a non-root member of a partition
-	  ========	================================
-
-	When set to be a partition root, the current cgroup is the
-	root of a new partition or scheduling domain that comprises
-	itself and all its descendants except those that are separate
-	partition roots themselves and their descendants.  The root
-	cgroup is always a partition root.
-
-	There are constraints on where a partition root can be set.
-	It can only be set in a cgroup if all the following conditions
-	are true.
-
-	1) The "cpuset.cpus" is not empty and the list of CPUs are
-	   exclusive, i.e. they are not shared by any of its siblings.
-	2) The parent cgroup is a partition root.
-	3) The "cpuset.cpus" is also a proper subset of the parent's
-	   "cpuset.cpus.effective".
-	4) There is no child cgroups with cpuset enabled.  This is for
-	   eliminating corner cases that have to be handled if such a
-	   condition is allowed.
-
-	Setting it to partition root will take the CPUs away from the
-	effective CPUs of the parent cgroup.  Once it is set, this
-	file cannot be reverted back to "member" if there are any child
-	cgroups with cpuset enabled.
-
-	A parent partition cannot distribute all its CPUs to its
-	child partitions.  There must be at least one cpu left in the
-	parent partition.
-
-	Once becoming a partition root, changes to "cpuset.cpus" is
-	generally allowed as long as the first condition above is true,
-	the change will not take away all the CPUs from the parent
-	partition and the new "cpuset.cpus" value is a superset of its
-	children's "cpuset.cpus" values.
-
-	Sometimes, external factors like changes to ancestors'
-	"cpuset.cpus" or cpu hotplug can cause the state of the partition
-	root to change.  On read, the "cpuset.sched.partition" file
-	can show the following values.
-
-	  ==============	==============================
-	  "member"		Non-root member of a partition
-	  "root"		Partition root
-	  "root invalid"	Invalid partition root
-	  ==============	==============================
-
-	It is a partition root if the first 2 partition root conditions
-	above are true and at least one CPU from "cpuset.cpus" is
-	granted by the parent cgroup.
-
-	A partition root can become invalid if none of CPUs requested
-	in "cpuset.cpus" can be granted by the parent cgroup or the
-	parent cgroup is no longer a partition root itself.  In this
-	case, it is not a real partition even though the restriction
-	of the first partition root condition above will still apply.
-	The cpu affinity of all the tasks in the cgroup will then be
-	associated with CPUs in the nearest ancestor partition.
-
-	An invalid partition root can be transitioned back to a
-	real partition root if at least one of the requested CPUs
-	can now be granted by its parent.  In this case, the cpu
-	affinity of all the tasks in the formerly invalid partition
-	will be associated to the CPUs of the newly formed partition.
-	Changing the partition state of an invalid partition root to
-	"member" is always allowed even if child cpusets are present.
+	  ==========	=====================================
+	  "member"	Non-root member of a partition
+	  "root"	Partition root
+	  "isolated"	Partition root without load balancing
+	  ==========	=====================================
+
+	The root cgroup is always a partition root and its state
+	cannot be changed.  All other non-root cgroups start out as
+	"member".
+
+	When set to "root", the current cgroup is the root of a new
+	partition or scheduling domain that comprises itself and all
+	its descendants except those that are separate partition roots
+	themselves and their descendants.
+
+	When set to "isolated", the CPUs in that partition root will
+	be in an isolated state without any load balancing from the
+	scheduler.  Tasks placed in such a partition with multiple
+	CPUs should be carefully distributed and bound to each of the
+	individual CPUs for optimal performance.
+
+	The value shown in "cpuset.cpus.effective" of a partition root
+	is the CPUs that the partition root can dedicate to a potential
+	new child partition root. The new child subtracts available
+	CPUs from its parent "cpuset.cpus.effective".
+
+	A partition root ("root" or "isolated") can be in one of the
+	two possible states - valid or invalid.  An invalid partition
+	root is in a degraded state where some state information may
+	be retained, but behaves more like a "member".
+
+	All possible state transitions among "member", "root" and
+	"isolated" are allowed.
+
+	On read, the "cpuset.cpus.partition" file can show the following
+	values.
+
+	  =============================	=====================================
+	  "member"			Non-root member of a partition
+	  "root"			Partition root
+	  "isolated"			Partition root without load balancing
+	  "root invalid (<reason>)"	Invalid partition root
+	  "isolated invalid (<reason>)"	Invalid isolated partition root
+	  =============================	=====================================
+
+	In the case of an invalid partition root, a descriptive string on
+	why the partition is invalid is included within parentheses.
+
+	For a partition root to become valid, the following conditions
+	must be met.
+
+	1) The "cpuset.cpus" is exclusive with its siblings , i.e. they
+	   are not shared by any of its siblings (exclusivity rule).
+	2) The parent cgroup is a valid partition root.
+	3) The "cpuset.cpus" is not empty and must contain at least
+	   one of the CPUs from parent's "cpuset.cpus", i.e. they overlap.
+	4) The "cpuset.cpus.effective" cannot be empty unless there is
+	   no task associated with this partition.
+
+	External events like hotplug or changes to "cpuset.cpus" can
+	cause a valid partition root to become invalid and vice versa.
+	Note that a task cannot be moved to a cgroup with empty
+	"cpuset.cpus.effective".
+
+	For a valid partition root with the sibling cpu exclusivity
+	rule enabled, changes made to "cpuset.cpus" that violate the
+	exclusivity rule will invalidate the partition as well as its
+	sibling partitions with conflicting cpuset.cpus values. So
+	care must be taking in changing "cpuset.cpus".
+
+	A valid non-root parent partition may distribute out all its CPUs
+	to its child partitions when there is no task associated with it.
+
+	Care must be taken to change a valid partition root to
+	"member" as all its child partitions, if present, will become
+	invalid causing disruption to tasks running in those child
+	partitions. These inactivated partitions could be recovered if
+	their parent is switched back to a partition root with a proper
+	set of "cpuset.cpus".
+
+	Poll and inotify events are triggered whenever the state of
+	"cpuset.cpus.partition" changes.  That includes changes caused
+	by write to "cpuset.cpus.partition", cpu hotplug or other
+	changes that modify the validity status of the partition.
+	This will allow user space agents to monitor unexpected changes
+	to "cpuset.cpus.partition" without the need to do continuous
+	polling.
 
 
 Device controller
@@ -2252,6 +2402,11 @@ HugeTLB Interface Files
 	are local to the cgroup i.e. not hierarchical. The file modified event
 	generated on this file reflects only the local events.
 
+  hugetlb.<hugepagesize>.numa_stat
+	Similar to memory.numa_stat, it shows the numa information of the
+        hugetlb pages of <hugepagesize> in this cgroup.  Only active in
+        use hugetlb pages are included.  The per-node values are in bytes.
+
 Misc
 ----
 
@@ -2310,6 +2465,16 @@ Miscellaneous controller provides 3 interface files. If two misc resources (res_
         Limits can be set higher than the capacity value in the misc.capacity
         file.
 
+  misc.events
+	A read-only flat-keyed file which exists on non-root cgroups. The
+	following entries are defined. Unless specified otherwise, a value
+	change in this file generates a file modified event. All fields in
+	this file are hierarchical.
+
+	  max
+		The number of times the cgroup's resource usage was
+		about to go over the max boundary.
+
 Migration and Ownership
 ~~~~~~~~~~~~~~~~~~~~~~~
 
diff --git a/Documentation/admin-guide/cifs/usage.rst b/Documentation/admin-guide/cifs/usage.rst
index f170d8820258..2e151cd8c2e4 100644
--- a/Documentation/admin-guide/cifs/usage.rst
+++ b/Documentation/admin-guide/cifs/usage.rst
@@ -399,7 +399,7 @@ A partial list of the supported mount options follows:
   sep
 		if first mount option (after the -o), overrides
 		the comma as the separator between the mount
-		parms. e.g.::
+		parameters. e.g.::
 
 			-o user=myname,password=mypassword,domain=mydom
 
@@ -734,10 +734,9 @@ SecurityFlags		Flags which control security negotiation and
 			using weaker password hashes is 0x37037 (lanman,
 			plaintext, ntlm, ntlmv2, signing allowed).  Some
 			SecurityFlags require the corresponding menuconfig
-			options to be enabled (lanman and plaintext require
-			CONFIG_CIFS_WEAK_PW_HASH for example).  Enabling
-			plaintext authentication currently requires also
-			enabling lanman authentication in the security flags
+			options to be enabled.  Enabling plaintext
+			authentication currently requires also enabling
+			lanman authentication in the security flags
 			because the cifs module only supports sending
 			laintext passwords using the older lanman dialect
 			form of the session setup SMB.  (e.g. for authentication
@@ -766,7 +765,7 @@ cifsFYI			If set to non-zero value, additional debug information
 			Some debugging statements are not compiled into the
 			cifs kernel unless CONFIG_CIFS_DEBUG2 is enabled in the
 			kernel configuration. cifsFYI may be set to one or
-			nore of the following flags (7 sets them all)::
+			more of the following flags (7 sets them all)::
 
 			  +-----------------------------------------------+------+
 			  | log cifs informational messages		  | 0x01 |
@@ -859,7 +858,7 @@ CIFS kernel module parameters
 These module parameters can be specified or modified either during the time of
 module loading or during the runtime by using the interface::
 
-	/proc/module/cifs/parameters/<param>
+	/sys/module/cifs/parameters/<param>
 
 i.e.::
 
diff --git a/Documentation/admin-guide/cputopology.rst b/Documentation/admin-guide/cputopology.rst
index b085dbac60a5..d29cacc9b3c3 100644
--- a/Documentation/admin-guide/cputopology.rst
+++ b/Documentation/admin-guide/cputopology.rst
@@ -8,22 +8,22 @@ to /proc/cpuinfo output of some architectures. They reside in
 Documentation/ABI/stable/sysfs-devices-system-cpu.
 
 Architecture-neutral, drivers/base/topology.c, exports these attributes.
-However, the book and drawer related sysfs files will only be created if
-CONFIG_SCHED_BOOK and CONFIG_SCHED_DRAWER are selected, respectively.
-
-CONFIG_SCHED_BOOK and CONFIG_SCHED_DRAWER are currently only used on s390,
-where they reflect the cpu and cache hierarchy.
+However the die, cluster, book, and drawer hierarchy related sysfs files will
+only be created if an architecture provides the related macros as described
+below.
 
 For an architecture to support this feature, it must define some of
 these macros in include/asm-XXX/topology.h::
 
 	#define topology_physical_package_id(cpu)
 	#define topology_die_id(cpu)
+	#define topology_cluster_id(cpu)
 	#define topology_core_id(cpu)
 	#define topology_book_id(cpu)
 	#define topology_drawer_id(cpu)
 	#define topology_sibling_cpumask(cpu)
 	#define topology_core_cpumask(cpu)
+	#define topology_cluster_cpumask(cpu)
 	#define topology_die_cpumask(cpu)
 	#define topology_book_cpumask(cpu)
 	#define topology_drawer_cpumask(cpu)
@@ -39,15 +39,16 @@ not defined by include/asm-XXX/topology.h:
 
 1) topology_physical_package_id: -1
 2) topology_die_id: -1
-3) topology_core_id: 0
-4) topology_sibling_cpumask: just the given CPU
-5) topology_core_cpumask: just the given CPU
-6) topology_die_cpumask: just the given CPU
-
-For architectures that don't support books (CONFIG_SCHED_BOOK) there are no
-default definitions for topology_book_id() and topology_book_cpumask().
-For architectures that don't support drawers (CONFIG_SCHED_DRAWER) there are
-no default definitions for topology_drawer_id() and topology_drawer_cpumask().
+3) topology_cluster_id: -1
+4) topology_core_id: 0
+5) topology_book_id: -1
+6) topology_drawer_id: -1
+7) topology_sibling_cpumask: just the given CPU
+8) topology_core_cpumask: just the given CPU
+9) topology_cluster_cpumask: just the given CPU
+10) topology_die_cpumask: just the given CPU
+11) topology_book_cpumask:  just the given CPU
+12) topology_drawer_cpumask: just the given CPU
 
 Additionally, CPU topology information is provided under
 /sys/devices/system/cpu and includes these files.  The internal
diff --git a/Documentation/admin-guide/device-mapper/cache-policies.rst b/Documentation/admin-guide/device-mapper/cache-policies.rst
index b17fe352fc41..13da4d831d46 100644
--- a/Documentation/admin-guide/device-mapper/cache-policies.rst
+++ b/Documentation/admin-guide/device-mapper/cache-policies.rst
@@ -70,7 +70,7 @@ the entries (each hotspot block covers a larger area than a single
 cache block).
 
 All this means smq uses ~25bytes per cache block.  Still a lot of
-memory, but a substantial improvement nontheless.
+memory, but a substantial improvement nonetheless.
 
 Level balancing
 ^^^^^^^^^^^^^^^
diff --git a/Documentation/admin-guide/device-mapper/dm-ebs.rst b/Documentation/admin-guide/device-mapper/dm-ebs.rst
index 534fa38e8862..c09f66db5621 100644
--- a/Documentation/admin-guide/device-mapper/dm-ebs.rst
+++ b/Documentation/admin-guide/device-mapper/dm-ebs.rst
@@ -31,7 +31,7 @@ Mandatory parameters:
 
 Optional parameter:
 
-    <underyling sectors>:
+    <underlying sectors>:
         Number of sectors defining the logical block size of <dev path>.
         2^N supported, e.g. 8 = emulate 8 sectors of 512 bytes = 4KiB.
         If not provided, the logical block size of <dev path> will be used.
diff --git a/Documentation/admin-guide/device-mapper/dm-flakey.rst b/Documentation/admin-guide/device-mapper/dm-flakey.rst
index 86138735879d..f7104c01b0f7 100644
--- a/Documentation/admin-guide/device-mapper/dm-flakey.rst
+++ b/Documentation/admin-guide/device-mapper/dm-flakey.rst
@@ -39,6 +39,10 @@ Optional feature parameters:
   If no feature parameters are present, during the periods of
   unreliability, all I/O returns errors.
 
+  error_reads:
+	All read I/O is failed with an error signalled.
+	Write I/O is handled correctly.
+
   drop_writes:
 	All write I/O is silently ignored.
 	Read I/O is handled correctly.
diff --git a/Documentation/admin-guide/device-mapper/dm-init.rst b/Documentation/admin-guide/device-mapper/dm-init.rst
index e5242ff17e9b..981d6a907699 100644
--- a/Documentation/admin-guide/device-mapper/dm-init.rst
+++ b/Documentation/admin-guide/device-mapper/dm-init.rst
@@ -123,3 +123,11 @@ Other examples (per target):
     0 1638400 verity 1 8:1 8:2 4096 4096 204800 1 sha256
     fb1a5a0f00deb908d8b53cb270858975e76cf64105d412ce764225d53b8f3cfd
     51934789604d1b92399c52e7cb149d1b3a1b74bbbcb103b2a0aaacbed5c08584
+
+For setups using device-mapper on top of asynchronously probed block
+devices (MMC, USB, ..), it may be necessary to tell dm-init to
+explicitly wait for them to become available before setting up the
+device-mapper tables. This can be done with the "dm-mod.waitfor="
+module parameter, which takes a list of devices to wait for::
+
+  dm-mod.waitfor=<device1>[,..,<deviceN>]
diff --git a/Documentation/admin-guide/device-mapper/dm-zoned.rst b/Documentation/admin-guide/device-mapper/dm-zoned.rst
index 0fac051caeac..932383fe6e88 100644
--- a/Documentation/admin-guide/device-mapper/dm-zoned.rst
+++ b/Documentation/admin-guide/device-mapper/dm-zoned.rst
@@ -46,7 +46,7 @@ just like conventional zones.
 The zones of the device(s) are separated into 2 types:
 
 1) Metadata zones: these are conventional zones used to store metadata.
-Metadata zones are not reported as useable capacity to the user.
+Metadata zones are not reported as usable capacity to the user.
 
 2) Data zones: all remaining zones, the vast majority of which will be
 sequential zones used exclusively to store user data. The conventional
diff --git a/Documentation/admin-guide/device-mapper/unstriped.rst b/Documentation/admin-guide/device-mapper/unstriped.rst
index 0a8d3eb3f072..5772ccdd1f5f 100644
--- a/Documentation/admin-guide/device-mapper/unstriped.rst
+++ b/Documentation/admin-guide/device-mapper/unstriped.rst
@@ -35,7 +35,7 @@ An example of undoing an existing dm-stripe
 
 This small bash script will setup 4 loop devices and use the existing
 striped target to combine the 4 devices into one.  It then will use
-the unstriped target ontop of the striped device to access the
+the unstriped target on top of the striped device to access the
 individual backing loop devices.  We write data to the newly exposed
 unstriped devices and verify the data written matches the correct
 underlying device on the striped array::
@@ -110,8 +110,8 @@ to get a 92% reduction in read latency using this device mapper target.
 Example dmsetup usage
 =====================
 
-unstriped ontop of Intel NVMe device that has 2 cores
------------------------------------------------------
+unstriped on top of Intel NVMe device that has 2 cores
+------------------------------------------------------
 
 ::
 
@@ -124,8 +124,8 @@ respectively::
   /dev/mapper/nvmset0
   /dev/mapper/nvmset1
 
-unstriped ontop of striped with 4 drives using 128K chunk size
---------------------------------------------------------------
+unstriped on top of striped with 4 drives using 128K chunk size
+---------------------------------------------------------------
 
 ::
 
diff --git a/Documentation/admin-guide/device-mapper/verity.rst b/Documentation/admin-guide/device-mapper/verity.rst
index 1a6b91368e59..a65c1602cb23 100644
--- a/Documentation/admin-guide/device-mapper/verity.rst
+++ b/Documentation/admin-guide/device-mapper/verity.rst
@@ -141,6 +141,10 @@ root_hash_sig_key_desc <key_description>
     also gain new certificates at run time if they are signed by a certificate
     already in the secondary trusted keyring.
 
+try_verify_in_tasklet
+    If verity hashes are in cache, verify data blocks in kernel tasklet instead
+    of workqueue. This option can reduce IO latency.
+
 Theory of operation
 ===================
 
diff --git a/Documentation/admin-guide/device-mapper/writecache.rst b/Documentation/admin-guide/device-mapper/writecache.rst
index 10429779a91a..60c16b7fd5ac 100644
--- a/Documentation/admin-guide/device-mapper/writecache.rst
+++ b/Documentation/admin-guide/device-mapper/writecache.rst
@@ -20,6 +20,7 @@ Constructor parameters:
    size)
 5. the number of optional parameters (the parameters with an argument
    count as two)
+
 	start_sector n		(default: 0)
 		offset from the start of cache device in 512-byte sectors
 	high_watermark n	(default: 50)
@@ -74,20 +75,21 @@ Constructor parameters:
 		the origin volume in the last n milliseconds
 
 Status:
+
 1. error indicator - 0 if there was no error, otherwise error number
 2. the number of blocks
 3. the number of free blocks
 4. the number of blocks under writeback
-5. the number of read requests
-6. the number of read requests that hit the cache
-7. the number of write requests
-8. the number of write requests that hit uncommitted block
-9. the number of write requests that hit committed block
-10. the number of write requests that bypass the cache
-11. the number of write requests that are allocated in the cache
+5. the number of read blocks
+6. the number of read blocks that hit the cache
+7. the number of write blocks
+8. the number of write blocks that hit uncommitted block
+9. the number of write blocks that hit committed block
+10. the number of write blocks that bypass the cache
+11. the number of write blocks that are allocated in the cache
 12. the number of write requests that are blocked on the freelist
 13. the number of flush requests
-14. the number of discard requests
+14. the number of discarded blocks
 
 Messages:
 	flush
diff --git a/Documentation/admin-guide/devices.rst b/Documentation/admin-guide/devices.rst
index 035275fedbdd..e3776d77374b 100644
--- a/Documentation/admin-guide/devices.rst
+++ b/Documentation/admin-guide/devices.rst
@@ -7,10 +7,9 @@ This list is the Linux Device List, the official registry of allocated
 device numbers and ``/dev`` directory nodes for the Linux operating
 system.
 
-The LaTeX version of this document is no longer maintained, nor is
-the document that used to reside at lanana.org.  This version in the
-mainline Linux kernel is the master document.  Updates shall be sent
-as patches to the kernel maintainers (see the
+The version of this document at lanana.org is no longer maintained.  This
+version in the mainline Linux kernel is the master document.  Updates
+shall be sent as patches to the kernel maintainers (see the
 :ref:`Documentation/process/submitting-patches.rst <submittingpatches>` document).
 Specifically explore the sections titled "CHAR and MISC DRIVERS", and
 "BLOCK LAYER" in the MAINTAINERS file to find the right maintainers
diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt
index 922c23bb4372..06c525e01ea5 100644
--- a/Documentation/admin-guide/devices.txt
+++ b/Documentation/admin-guide/devices.txt
@@ -1933,7 +1933,7 @@
 		    ...
 		255= /dev/umem/d15p15  15th partition of 16th board.
 
- 117 char	COSA/SRP synchronous serial card
+ 117 char	[REMOVED] COSA/SRP synchronous serial card
 		  0 = /dev/cosa0c0	1st board, 1st channel
 		  1 = /dev/cosa0c1	1st board, 2nd channel
 		    ...
@@ -2339,13 +2339,7 @@
 		disks (see major number 3) except that the limit on
 		partitions is 31.
 
- 162 char	Raw block device interface
-		  0 = /dev/rawctl	Raw I/O control device
-		  1 = /dev/raw/raw1	First raw I/O device
-		  2 = /dev/raw/raw2	Second raw I/O device
-		    ...
-		 max minor number of raw device is set by kernel config
-		 MAX_RAW_DEVS or raw module parameter 'max_raw_devs'
+ 162 char	Used for (now removed) raw block device interface
 
  163 char
 
@@ -3086,6 +3080,11 @@
 		  ...
 		  255 = /dev/osd255	256th OSD Device
 
+ 261 char	Compute Acceleration Devices
+		  0 = /dev/accel/accel0	First acceleration device
+		  1 = /dev/accel/accel1	Second acceleration device
+		    ...
+
  384-511 char	RESERVED FOR DYNAMIC ASSIGNMENT
 		Character devices that request a dynamic allocation of major
 		number will take numbers starting from 511 and downward,
diff --git a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst
index b119b8277b3e..8dc668cc1216 100644
--- a/Documentation/admin-guide/dynamic-debug-howto.rst
+++ b/Documentation/admin-guide/dynamic-debug-howto.rst
@@ -5,143 +5,115 @@ Dynamic debug
 Introduction
 ============
 
-This document describes how to use the dynamic debug (dyndbg) feature.
+Dynamic debug allows you to dynamically enable/disable kernel
+debug-print code to obtain additional kernel information.
 
-Dynamic debug is designed to allow you to dynamically enable/disable
-kernel code to obtain additional kernel information.  Currently, if
-``CONFIG_DYNAMIC_DEBUG`` is set, then all ``pr_debug()``/``dev_dbg()`` and
-``print_hex_dump_debug()``/``print_hex_dump_bytes()`` calls can be dynamically
-enabled per-callsite.
+If ``/proc/dynamic_debug/control`` exists, your kernel has dynamic
+debug.  You'll need root access (sudo su) to use this.
 
-If you do not want to enable dynamic debug globally (i.e. in some embedded
-system), you may set ``CONFIG_DYNAMIC_DEBUG_CORE`` as basic support of dynamic
-debug and add ``ccflags := -DDYNAMIC_DEBUG_MODULE`` into the Makefile of any
-modules which you'd like to dynamically debug later.
-
-If ``CONFIG_DYNAMIC_DEBUG`` is not set, ``print_hex_dump_debug()`` is just
-shortcut for ``print_hex_dump(KERN_DEBUG)``.
-
-For ``print_hex_dump_debug()``/``print_hex_dump_bytes()``, format string is
-its ``prefix_str`` argument, if it is constant string; or ``hexdump``
-in case ``prefix_str`` is built dynamically.
+Dynamic debug provides:
 
-Dynamic debug has even more useful features:
+ * a Catalog of all *prdbgs* in your kernel.
+   ``cat /proc/dynamic_debug/control`` to see them.
 
- * Simple query language allows turning on and off debugging
-   statements by matching any combination of 0 or 1 of:
+ * a Simple query/command language to alter *prdbgs* by selecting on
+   any combination of 0 or 1 of:
 
    - source filename
    - function name
    - line number (including ranges of line numbers)
    - module name
    - format string
-
- * Provides a debugfs control file: ``<debugfs>/dynamic_debug/control``
-   which can be read to display the complete list of known debug
-   statements, to help guide you
-
-Controlling dynamic debug Behaviour
-===================================
-
-The behaviour of ``pr_debug()``/``dev_dbg()`` are controlled via writing to a
-control file in the 'debugfs' filesystem. Thus, you must first mount
-the debugfs filesystem, in order to make use of this feature.
-Subsequently, we refer to the control file as:
-``<debugfs>/dynamic_debug/control``. For example, if you want to enable
-printing from source file ``svcsock.c``, line 1603 you simply do::
-
-  nullarbor:~ # echo 'file svcsock.c line 1603 +p' >
-				<debugfs>/dynamic_debug/control
-
-If you make a mistake with the syntax, the write will fail thus::
-
-  nullarbor:~ # echo 'file svcsock.c wtf 1 +p' >
-				<debugfs>/dynamic_debug/control
-  -bash: echo: write error: Invalid argument
-
-Note, for systems without 'debugfs' enabled, the control file can be
-found in ``/proc/dynamic_debug/control``.
+   - class name (as known/declared by each module)
 
 Viewing Dynamic Debug Behaviour
 ===============================
 
-You can view the currently configured behaviour of all the debug
-statements via::
+You can view the currently configured behaviour in the *prdbg* catalog::
 
-  nullarbor:~ # cat <debugfs>/dynamic_debug/control
+  :#> head -n7 /proc/dynamic_debug/control
   # filename:lineno [module]function flags format
-  net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup =_ "SVCRDMA Module Removed, deregister RPC RDMA transport\012"
-  net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init =_ "\011max_inline       : %d\012"
-  net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init =_ "\011sq_depth         : %d\012"
-  net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init =_ "\011max_requests     : %d\012"
-  ...
+  init/main.c:1179 [main]initcall_blacklist =_ "blacklisting initcall %s\012
+  init/main.c:1218 [main]initcall_blacklisted =_ "initcall %s blacklisted\012"
+  init/main.c:1424 [main]run_init_process =_ "  with arguments:\012"
+  init/main.c:1426 [main]run_init_process =_ "    %s\012"
+  init/main.c:1427 [main]run_init_process =_ "  with environment:\012"
+  init/main.c:1429 [main]run_init_process =_ "    %s\012"
 
+The 3rd space-delimited column shows the current flags, preceded by
+a ``=`` for easy use with grep/cut. ``=p`` shows enabled callsites.
 
-You can also apply standard Unix text manipulation filters to this
-data, e.g.::
+Controlling dynamic debug Behaviour
+===================================
 
-  nullarbor:~ # grep -i rdma <debugfs>/dynamic_debug/control  | wc -l
-  62
+The behaviour of *prdbg* sites are controlled by writing
+query/commands to the control file.  Example::
 
-  nullarbor:~ # grep -i tcp <debugfs>/dynamic_debug/control | wc -l
-  42
+  # grease the interface
+  :#> alias ddcmd='echo $* > /proc/dynamic_debug/control'
 
-The third column shows the currently enabled flags for each debug
-statement callsite (see below for definitions of the flags).  The
-default value, with no flags enabled, is ``=_``.  So you can view all
-the debug statement callsites with any non-default flags::
+  :#> ddcmd '-p; module main func run* +p'
+  :#> grep =p /proc/dynamic_debug/control
+  init/main.c:1424 [main]run_init_process =p "  with arguments:\012"
+  init/main.c:1426 [main]run_init_process =p "    %s\012"
+  init/main.c:1427 [main]run_init_process =p "  with environment:\012"
+  init/main.c:1429 [main]run_init_process =p "    %s\012"
 
-  nullarbor:~ # awk '$3 != "=_"' <debugfs>/dynamic_debug/control
-  # filename:lineno [module]function flags format
-  net/sunrpc/svcsock.c:1603 [sunrpc]svc_send p "svc_process: st_sendto returned %d\012"
+Error messages go to console/syslog::
+
+  :#> ddcmd mode foo +p
+  dyndbg: unknown keyword "mode"
+  dyndbg: query parse failed
+  bash: echo: write error: Invalid argument
+
+If debugfs is also enabled and mounted, ``dynamic_debug/control`` is
+also under the mount-dir, typically ``/sys/kernel/debug/``.
 
 Command Language Reference
 ==========================
 
-At the lexical level, a command comprises a sequence of words separated
+At the basic lexical level, a command is a sequence of words separated
 by spaces or tabs.  So these are all equivalent::
 
-  nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
-				<debugfs>/dynamic_debug/control
-  nullarbor:~ # echo -n '  file   svcsock.c     line  1603 +p  ' >
-				<debugfs>/dynamic_debug/control
-  nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
-				<debugfs>/dynamic_debug/control
+  :#> ddcmd file svcsock.c line 1603 +p
+  :#> ddcmd "file svcsock.c line 1603 +p"
+  :#> ddcmd '  file   svcsock.c     line  1603 +p  '
 
 Command submissions are bounded by a write() system call.
 Multiple commands can be written together, separated by ``;`` or ``\n``::
 
-  ~# echo "func pnpacpi_get_resources +p; func pnp_assign_mem +p" \
-     > <debugfs>/dynamic_debug/control
+  :#> ddcmd "func pnpacpi_get_resources +p; func pnp_assign_mem +p"
+  :#> ddcmd <<"EOC"
+  func pnpacpi_get_resources +p
+  func pnp_assign_mem +p
+  EOC
+  :#> cat query-batch-file > /proc/dynamic_debug/control
 
-If your query set is big, you can batch them too::
+You can also use wildcards in each query term. The match rule supports
+``*`` (matches zero or more characters) and ``?`` (matches exactly one
+character). For example, you can match all usb drivers::
 
-  ~# cat query-batch-file > <debugfs>/dynamic_debug/control
+  :#> ddcmd file "drivers/usb/*" +p	# "" to suppress shell expansion
 
-Another way is to use wildcards. The match rule supports ``*`` (matches
-zero or more characters) and ``?`` (matches exactly one character). For
-example, you can match all usb drivers::
-
-  ~# echo "file drivers/usb/* +p" > <debugfs>/dynamic_debug/control
-
-At the syntactical level, a command comprises a sequence of match
-specifications, followed by a flags change specification::
+Syntactically, a command is pairs of keyword values, followed by a
+flags change or setting::
 
   command ::= match-spec* flags-spec
 
-The match-spec's are used to choose a subset of the known pr_debug()
-callsites to which to apply the flags-spec.  Think of them as a query
-with implicit ANDs between each pair.  Note that an empty list of
-match-specs will select all debug statement callsites.
+The match-spec's select *prdbgs* from the catalog, upon which to apply
+the flags-spec, all constraints are ANDed together.  An absent keyword
+is the same as keyword "*".
+
 
-A match specification comprises a keyword, which controls the
-attribute of the callsite to be compared, and a value to compare
-against.  Possible keywords are:::
+A match specification is a keyword, which selects the attribute of
+the callsite to be compared, and a value to compare against.  Possible
+keywords are:::
 
   match-spec ::= 'func' string |
 		 'file' string |
 		 'module' string |
 		 'format' string |
+		 'class' string |
 		 'line' line-range
 
   line-range ::= lineno |
@@ -203,6 +175,16 @@ format
 	format "nfsd: SETATTR"  // a neater way to match a format with whitespace
 	format 'nfsd: SETATTR'  // yet another way to match a format with whitespace
 
+class
+    The given class_name is validated against each module, which may
+    have declared a list of known class_names.  If the class_name is
+    found for a module, callsite & class matching and adjustment
+    proceeds.  Examples::
+
+	class DRM_UT_KMS	# a DRM.debug category
+	class JUNK		# silent non-match
+	// class TLD_*		# NOTICE: no wildcard in class names
+
 line
     The given line number or range of line numbers is compared
     against the line number of each ``pr_debug()`` callsite.  A single
@@ -228,17 +210,16 @@ of the characters::
 The flags are::
 
   p    enables the pr_debug() callsite.
-  f    Include the function name in the printed message
-  l    Include line number in the printed message
-  m    Include module name in the printed message
-  t    Include thread ID in messages not generated from interrupt context
-  _    No flags are set. (Or'd with others on input)
+  _    enables no flags.
 
-For ``print_hex_dump_debug()`` and ``print_hex_dump_bytes()``, only ``p`` flag
-have meaning, other flags ignored.
+  Decorator flags add to the message-prefix, in order:
+  t    Include thread ID, or <intr>
+  m    Include module name
+  f    Include the function name
+  l    Include line number
 
-For display, the flags are preceded by ``=``
-(mnemonic: what the flags are currently equal to).
+For ``print_hex_dump_debug()`` and ``print_hex_dump_bytes()``, only
+the ``p`` flag has meaning, other flags are ignored.
 
 Note the regexp ``^[-+=][flmpt_]+$`` matches a flags specification.
 To clear all flags at once, use ``=_`` or ``-flmpt``.
@@ -249,8 +230,7 @@ Debug messages during Boot Process
 
 To activate debug messages for core code and built-in modules during
 the boot process, even before userspace and debugfs exists, use
-``dyndbg="QUERY"``, ``module.dyndbg="QUERY"``, or ``ddebug_query="QUERY"``
-(``ddebug_query`` is obsoleted by ``dyndbg``, and deprecated).  QUERY follows
+``dyndbg="QUERY"`` or ``module.dyndbg="QUERY"``.  QUERY follows
 the syntax described above, but must not exceed 1023 characters.  Your
 bootloader may impose lower limits.
 
@@ -270,8 +250,7 @@ this boot parameter for debugging purposes.
 
 If ``foo`` module is not built-in, ``foo.dyndbg`` will still be processed at
 boot time, without effect, but will be reprocessed when module is
-loaded later. ``ddebug_query=`` and bare ``dyndbg=`` are only processed at
-boot.
+loaded later. Bare ``dyndbg=`` is only processed at boot.
 
 
 Debug Messages at Module Initialization Time
@@ -315,7 +294,7 @@ For ``CONFIG_DYNAMIC_DEBUG`` kernels, any settings given at boot-time (or
 enabled by ``-DDEBUG`` flag during compilation) can be disabled later via
 the debugfs interface if the debug messages are no longer needed::
 
-   echo "module module_name -p" > <debugfs>/dynamic_debug/control
+   echo "module module_name -p" > /proc/dynamic_debug/control
 
 Examples
 ========
@@ -323,43 +302,75 @@ Examples
 ::
 
   // enable the message at line 1603 of file svcsock.c
-  nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
-				<debugfs>/dynamic_debug/control
+  :#> ddcmd 'file svcsock.c line 1603 +p'
 
   // enable all the messages in file svcsock.c
-  nullarbor:~ # echo -n 'file svcsock.c +p' >
-				<debugfs>/dynamic_debug/control
+  :#> ddcmd 'file svcsock.c +p'
 
   // enable all the messages in the NFS server module
-  nullarbor:~ # echo -n 'module nfsd +p' >
-				<debugfs>/dynamic_debug/control
+  :#> ddcmd 'module nfsd +p'
 
   // enable all 12 messages in the function svc_process()
-  nullarbor:~ # echo -n 'func svc_process +p' >
-				<debugfs>/dynamic_debug/control
+  :#> ddcmd 'func svc_process +p'
 
   // disable all 12 messages in the function svc_process()
-  nullarbor:~ # echo -n 'func svc_process -p' >
-				<debugfs>/dynamic_debug/control
+  :#> ddcmd 'func svc_process -p'
 
   // enable messages for NFS calls READ, READLINK, READDIR and READDIR+.
-  nullarbor:~ # echo -n 'format "nfsd: READ" +p' >
-				<debugfs>/dynamic_debug/control
+  :#> ddcmd 'format "nfsd: READ" +p'
 
   // enable messages in files of which the paths include string "usb"
-  nullarbor:~ # echo -n 'file *usb* +p' > <debugfs>/dynamic_debug/control
+  :#> ddcmd 'file *usb* +p' > /proc/dynamic_debug/control
 
   // enable all messages
-  nullarbor:~ # echo -n '+p' > <debugfs>/dynamic_debug/control
+  :#> ddcmd '+p' > /proc/dynamic_debug/control
 
   // add module, function to all enabled messages
-  nullarbor:~ # echo -n '+mf' > <debugfs>/dynamic_debug/control
+  :#> ddcmd '+mf' > /proc/dynamic_debug/control
 
   // boot-args example, with newlines and comments for readability
   Kernel command line: ...
-    // see whats going on in dyndbg=value processing
-    dynamic_debug.verbose=1
-    // enable pr_debugs in 2 builtins, #cmt is stripped
-    dyndbg="module params +p #cmt ; module sys +p"
+    // see what's going on in dyndbg=value processing
+    dynamic_debug.verbose=3
+    // enable pr_debugs in the btrfs module (can be builtin or loadable)
+    btrfs.dyndbg="+p"
+    // enable pr_debugs in all files under init/
+    // and the function parse_one, #cmt is stripped
+    dyndbg="file init/* +p #cmt ; func parse_one +p"
     // enable pr_debugs in 2 functions in a module loaded later
     pc87360.dyndbg="func pc87360_init_device +p; func pc87360_find +p"
+
+Kernel Configuration
+====================
+
+Dynamic Debug is enabled via kernel config items::
+
+  CONFIG_DYNAMIC_DEBUG=y	# build catalog, enables CORE
+  CONFIG_DYNAMIC_DEBUG_CORE=y	# enable mechanics only, skip catalog
+
+If you do not want to enable dynamic debug globally (i.e. in some embedded
+system), you may set ``CONFIG_DYNAMIC_DEBUG_CORE`` as basic support of dynamic
+debug and add ``ccflags := -DDYNAMIC_DEBUG_MODULE`` into the Makefile of any
+modules which you'd like to dynamically debug later.
+
+
+Kernel *prdbg* API
+==================
+
+The following functions are cataloged and controllable when dynamic
+debug is enabled::
+
+  pr_debug()
+  dev_dbg()
+  print_hex_dump_debug()
+  print_hex_dump_bytes()
+
+Otherwise, they are off by default; ``ccflags += -DDEBUG`` or
+``#define DEBUG`` in a source file will enable them appropriately.
+
+If ``CONFIG_DYNAMIC_DEBUG`` is not set, ``print_hex_dump_debug()`` is
+just a shortcut for ``print_hex_dump(KERN_DEBUG)``.
+
+For ``print_hex_dump_debug()``/``print_hex_dump_bytes()``, format string is
+its ``prefix_str`` argument, if it is constant string; or ``hexdump``
+in case ``prefix_str`` is built dynamically.
diff --git a/Documentation/admin-guide/efi-stub.rst b/Documentation/admin-guide/efi-stub.rst
index 833edb0d0bc4..b24e7c40d832 100644
--- a/Documentation/admin-guide/efi-stub.rst
+++ b/Documentation/admin-guide/efi-stub.rst
@@ -7,10 +7,10 @@ as a PE/COFF image, thereby convincing EFI firmware loaders to load
 it as an EFI executable. The code that modifies the bzImage header,
 along with the EFI-specific entry point that the firmware loader
 jumps to are collectively known as the "EFI boot stub", and live in
-arch/x86/boot/header.S and arch/x86/boot/compressed/eboot.c,
+arch/x86/boot/header.S and drivers/firmware/efi/libstub/x86-stub.c,
 respectively. For ARM the EFI stub is implemented in
 arch/arm/boot/compressed/efi-header.S and
-arch/arm/boot/compressed/efi-stub.c. EFI stub code that is shared
+drivers/firmware/efi/libstub/arm32-stub.c. EFI stub code that is shared
 between architectures is in drivers/firmware/efi/libstub.
 
 For arm64, there is no compressed kernel support, so the Image itself
diff --git a/Documentation/admin-guide/ext4.rst b/Documentation/admin-guide/ext4.rst
index 4c559e08d11e..5740d85439ff 100644
--- a/Documentation/admin-guide/ext4.rst
+++ b/Documentation/admin-guide/ext4.rst
@@ -489,9 +489,6 @@ Files in /sys/fs/ext4/<devname>:
         multiple of this tuning parameter if the stripe size is not set in the
         ext4 superblock
 
-  mb_max_inode_prealloc
-        The maximum length of per-inode ext4_prealloc_space list.
-
   mb_max_to_scan
         The maximum number of extents the multiblock allocator will search to
         find the best extent.
diff --git a/Documentation/admin-guide/filesystem-monitoring.rst b/Documentation/admin-guide/filesystem-monitoring.rst
new file mode 100644
index 000000000000..ab8dba76283c
--- /dev/null
+++ b/Documentation/admin-guide/filesystem-monitoring.rst
@@ -0,0 +1,78 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====================================
+File system Monitoring with fanotify
+====================================
+
+File system Error Reporting
+===========================
+
+Fanotify supports the FAN_FS_ERROR event type for file system-wide error
+reporting.  It is meant to be used by file system health monitoring
+daemons, which listen for these events and take actions (notify
+sysadmin, start recovery) when a file system problem is detected.
+
+By design, a FAN_FS_ERROR notification exposes sufficient information
+for a monitoring tool to know a problem in the file system has happened.
+It doesn't necessarily provide a user space application with semantics
+to verify an IO operation was successfully executed.  That is out of
+scope for this feature.  Instead, it is only meant as a framework for
+early file system problem detection and reporting recovery tools.
+
+When a file system operation fails, it is common for dozens of kernel
+errors to cascade after the initial failure, hiding the original failure
+log, which is usually the most useful debug data to troubleshoot the
+problem.  For this reason, FAN_FS_ERROR tries to report only the first
+error that occurred for a file system since the last notification, and
+it simply counts additional errors.  This ensures that the most
+important pieces of information are never lost.
+
+FAN_FS_ERROR requires the fanotify group to be setup with the
+FAN_REPORT_FID flag.
+
+At the time of this writing, the only file system that emits FAN_FS_ERROR
+notifications is Ext4.
+
+A FAN_FS_ERROR Notification has the following format::
+
+  ::
+
+     [ Notification Metadata (Mandatory) ]
+     [ Generic Error Record  (Mandatory) ]
+     [ FID record            (Mandatory) ]
+
+The order of records is not guaranteed, and new records might be added
+in the future.  Therefore, applications must not rely on the order and
+must be prepared to skip over unknown records. Please refer to
+``samples/fanotify/fs-monitor.c`` for an example parser.
+
+Generic error record
+--------------------
+
+The generic error record provides enough information for a file system
+agnostic tool to learn about a problem in the file system, without
+providing any additional details about the problem.  This record is
+identified by ``struct fanotify_event_info_header.info_type`` being set
+to FAN_EVENT_INFO_TYPE_ERROR.
+
+  ::
+
+     struct fanotify_event_info_error {
+          struct fanotify_event_info_header hdr;
+         __s32 error;
+         __u32 error_count;
+     };
+
+The `error` field identifies the type of error using errno values.
+`error_count` tracks the number of errors that occurred and were
+suppressed to preserve the original error information, since the last
+notification.
+
+FID record
+----------
+
+The FID record can be used to uniquely identify the inode that triggered
+the error through the combination of fsid and file handle.  A file system
+specific application can use that information to attempt a recovery
+procedure.  Errors that are not related to an inode are reported with an
+empty file handle of type FILEID_INVALID.
diff --git a/Documentation/admin-guide/gpio/gpio-sim.rst b/Documentation/admin-guide/gpio/gpio-sim.rst
new file mode 100644
index 000000000000..1cc5567a4bbe
--- /dev/null
+++ b/Documentation/admin-guide/gpio/gpio-sim.rst
@@ -0,0 +1,134 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Configfs GPIO Simulator
+=======================
+
+The configfs GPIO Simulator (gpio-sim) provides a way to create simulated GPIO
+chips for testing purposes. The lines exposed by these chips can be accessed
+using the standard GPIO character device interface as well as manipulated
+using sysfs attributes.
+
+Creating simulated chips
+------------------------
+
+The gpio-sim module registers a configfs subsystem called ``'gpio-sim'``. For
+details of the configfs filesystem, please refer to the configfs documentation.
+
+The user can create a hierarchy of configfs groups and items as well as modify
+values of exposed attributes. Once the chip is instantiated, this hierarchy
+will be translated to appropriate device properties. The general structure is:
+
+**Group:** ``/config/gpio-sim``
+
+This is the top directory of the gpio-sim configfs tree.
+
+**Group:** ``/config/gpio-sim/gpio-device``
+
+**Attribute:** ``/config/gpio-sim/gpio-device/dev_name``
+
+**Attribute:** ``/config/gpio-sim/gpio-device/live``
+
+This is a directory representing a GPIO platform device. The ``'dev_name'``
+attribute is read-only and allows the user-space to read the platform device
+name (e.g. ``'gpio-sim.0'``). The ``'live'`` attribute allows to trigger the
+actual creation of the device once it's fully configured. The accepted values
+are: ``'1'`` to enable the simulated device and ``'0'`` to disable and tear
+it down.
+
+**Group:** ``/config/gpio-sim/gpio-device/gpio-bankX``
+
+**Attribute:** ``/config/gpio-sim/gpio-device/gpio-bankX/chip_name``
+
+**Attribute:** ``/config/gpio-sim/gpio-device/gpio-bankX/num_lines``
+
+This group represents a bank of GPIOs under the top platform device. The
+``'chip_name'`` attribute is read-only and allows the user-space to read the
+device name of the bank device. The ``'num_lines'`` attribute allows to specify
+the number of lines exposed by this bank.
+
+**Group:** ``/config/gpio-sim/gpio-device/gpio-bankX/lineY``
+
+**Attribute:** ``/config/gpio-sim/gpio-device/gpio-bankX/lineY/name``
+
+This group represents a single line at the offset Y. The 'name' attribute
+allows to set the line name as represented by the 'gpio-line-names' property.
+
+**Item:** ``/config/gpio-sim/gpio-device/gpio-bankX/lineY/hog``
+
+**Attribute:** ``/config/gpio-sim/gpio-device/gpio-bankX/lineY/hog/name``
+
+**Attribute:** ``/config/gpio-sim/gpio-device/gpio-bankX/lineY/hog/direction``
+
+This item makes the gpio-sim module hog the associated line. The ``'name'``
+attribute specifies the in-kernel consumer name to use. The ``'direction'``
+attribute specifies the hog direction and must be one of: ``'input'``,
+``'output-high'`` and ``'output-low'``.
+
+Inside each bank directory, there's a set of attributes that can be used to
+configure the new chip. Additionally the user can ``mkdir()`` subdirectories
+inside the chip's directory that allow to pass additional configuration for
+specific lines. The name of those subdirectories must take the form of:
+``'line<offset>'`` (e.g. ``'line0'``, ``'line20'``, etc.) as the name will be
+used by the module to assign the config to the specific line at given offset.
+
+Once the confiuration is complete, the ``'live'`` attribute must be set to 1 in
+order to instantiate the chip. It can be set back to 0 to destroy the simulated
+chip. The module will synchronously wait for the new simulated device to be
+successfully probed and if this doesn't happen, writing to ``'live'`` will
+result in an error.
+
+Simulated GPIO chips can also be defined in device-tree. The compatible string
+must be: ``"gpio-simulator"``. Supported properties are:
+
+  ``"gpio-sim,label"`` - chip label
+
+Other standard GPIO properties (like ``"gpio-line-names"``, ``"ngpios"`` or
+``"gpio-hog"``) are also supported. Please refer to the GPIO documentation for
+details.
+
+An example device-tree code defining a GPIO simulator:
+
+.. code-block :: none
+
+    gpio-sim {
+        compatible = "gpio-simulator";
+
+        bank0 {
+            gpio-controller;
+            #gpio-cells = <2>;
+            ngpios = <16>;
+            gpio-sim,label = "dt-bank0";
+            gpio-line-names = "", "sim-foo", "", "sim-bar";
+        };
+
+        bank1 {
+            gpio-controller;
+            #gpio-cells = <2>;
+            ngpios = <8>;
+            gpio-sim,label = "dt-bank1";
+
+            line3 {
+                gpio-hog;
+                gpios = <3 0>;
+                output-high;
+                line-name = "sim-hog-from-dt";
+            };
+        };
+    };
+
+Manipulating simulated lines
+----------------------------
+
+Each simulated GPIO chip creates a separate sysfs group under its device
+directory for each exposed line
+(e.g. ``/sys/devices/platform/gpio-sim.X/gpiochipY/``). The name of each group
+is of the form: ``'sim_gpioX'`` where X is the offset of the line. Inside each
+group there are two attributes:
+
+    ``pull`` - allows to read and set the current simulated pull setting for
+               every line, when writing the value must be one of: ``'pull-up'``,
+               ``'pull-down'``
+
+    ``value`` - allows to read the current value of the line which may be
+                different from the pull if the line is being driven from
+                user-space
diff --git a/Documentation/admin-guide/gpio/index.rst b/Documentation/admin-guide/gpio/index.rst
index 7db367572f30..f6861ca16ffe 100644
--- a/Documentation/admin-guide/gpio/index.rst
+++ b/Documentation/admin-guide/gpio/index.rst
@@ -10,6 +10,7 @@ gpio
     gpio-aggregator
     sysfs
     gpio-mockup
+    gpio-sim
 
 .. only::  subproject and html
 
diff --git a/Documentation/admin-guide/gpio/sysfs.rst b/Documentation/admin-guide/gpio/sysfs.rst
index ec09ffd983e7..35171d15f78d 100644
--- a/Documentation/admin-guide/gpio/sysfs.rst
+++ b/Documentation/admin-guide/gpio/sysfs.rst
@@ -145,7 +145,7 @@ requested using gpio_request()::
 	/* export the GPIO to userspace */
 	int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
 
-	/* reverse gpio_export() */
+	/* reverse gpiod_export() */
 	void gpiod_unexport(struct gpio_desc *desc);
 
 	/* create a sysfs link to an exported GPIO node */
diff --git a/Documentation/admin-guide/hw-vuln/core-scheduling.rst b/Documentation/admin-guide/hw-vuln/core-scheduling.rst
index 0febe458597c..cf1eeefdfc32 100644
--- a/Documentation/admin-guide/hw-vuln/core-scheduling.rst
+++ b/Documentation/admin-guide/hw-vuln/core-scheduling.rst
@@ -61,8 +61,9 @@ arg3:
     ``pid`` of the task for which the operation applies.
 
 arg4:
-    ``pid_type`` for which the operation applies. It is of type ``enum pid_type``.
-    For example, if arg4 is ``PIDTYPE_TGID``, then the operation of this command
+    ``pid_type`` for which the operation applies. It is one of
+    ``PR_SCHED_CORE_SCOPE_``-prefixed macro constants.  For example, if arg4
+    is ``PR_SCHED_CORE_SCOPE_THREAD_GROUP``, then the operation of this command
     will be performed for all tasks in the task group of ``pid``.
 
 arg5:
diff --git a/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst b/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst
new file mode 100644
index 000000000000..875616d675fe
--- /dev/null
+++ b/Documentation/admin-guide/hw-vuln/cross-thread-rsb.rst
@@ -0,0 +1,91 @@
+
+.. SPDX-License-Identifier: GPL-2.0
+
+Cross-Thread Return Address Predictions
+=======================================
+
+Certain AMD and Hygon processors are subject to a cross-thread return address
+predictions vulnerability. When running in SMT mode and one sibling thread
+transitions out of C0 state, the other sibling thread could use return target
+predictions from the sibling thread that transitioned out of C0.
+
+The Spectre v2 mitigations protect the Linux kernel, as it fills the return
+address prediction entries with safe targets when context switching to the idle
+thread. However, KVM does allow a VMM to prevent exiting guest mode when
+transitioning out of C0. This could result in a guest-controlled return target
+being consumed by the sibling thread.
+
+Affected processors
+-------------------
+
+The following CPUs are vulnerable:
+
+    - AMD Family 17h processors
+    - Hygon Family 18h processors
+
+Related CVEs
+------------
+
+The following CVE entry is related to this issue:
+
+   ==============  =======================================
+   CVE-2022-27672  Cross-Thread Return Address Predictions
+   ==============  =======================================
+
+Problem
+-------
+
+Affected SMT-capable processors support 1T and 2T modes of execution when SMT
+is enabled. In 2T mode, both threads in a core are executing code. For the
+processor core to enter 1T mode, it is required that one of the threads
+requests to transition out of the C0 state. This can be communicated with the
+HLT instruction or with an MWAIT instruction that requests non-C0.
+When the thread re-enters the C0 state, the processor transitions back
+to 2T mode, assuming the other thread is also still in C0 state.
+
+In affected processors, the return address predictor (RAP) is partitioned
+depending on the SMT mode. For instance, in 2T mode each thread uses a private
+16-entry RAP, but in 1T mode, the active thread uses a 32-entry RAP. Upon
+transition between 1T/2T mode, the RAP contents are not modified but the RAP
+pointers (which control the next return target to use for predictions) may
+change. This behavior may result in return targets from one SMT thread being
+used by RET predictions in the sibling thread following a 1T/2T switch. In
+particular, a RET instruction executed immediately after a transition to 1T may
+use a return target from the thread that just became idle. In theory, this
+could lead to information disclosure if the return targets used do not come
+from trustworthy code.
+
+Attack scenarios
+----------------
+
+An attack can be mounted on affected processors by performing a series of CALL
+instructions with targeted return locations and then transitioning out of C0
+state.
+
+Mitigation mechanism
+--------------------
+
+Before entering idle state, the kernel context switches to the idle thread. The
+context switch fills the RAP entries (referred to as the RSB in Linux) with safe
+targets by performing a sequence of CALL instructions.
+
+Prevent a guest VM from directly putting the processor into an idle state by
+intercepting HLT and MWAIT instructions.
+
+Both mitigations are required to fully address this issue.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+
+Use existing Spectre v2 mitigations that will fill the RSB on context switch.
+
+Mitigation control for KVM - module parameter
+---------------------------------------------
+
+By default, the KVM hypervisor mitigates this issue by intercepting guest
+attempts to transition out of C0. A VMM can use the KVM_CAP_X86_DISABLE_EXITS
+capability to override those interceptions, but since this is not common, the
+mitigation that covers this path is not enabled by default.
+
+The mitigation for the KVM_CAP_X86_DISABLE_EXITS capability can be turned on
+using the boolean module parameter mitigate_smt_rsb, e.g. ``kvm.mitigate_smt_rsb=1``.
diff --git a/Documentation/admin-guide/hw-vuln/index.rst b/Documentation/admin-guide/hw-vuln/index.rst
index 8cbc711cda93..e0614760a99e 100644
--- a/Documentation/admin-guide/hw-vuln/index.rst
+++ b/Documentation/admin-guide/hw-vuln/index.rst
@@ -17,3 +17,5 @@ are configurable at compile, boot or run time.
    special-register-buffer-data-sampling.rst
    core-scheduling.rst
    l1d_flush.rst
+   processor_mmio_stale_data.rst
+   cross-thread-rsb.rst
diff --git a/Documentation/admin-guide/hw-vuln/mds.rst b/Documentation/admin-guide/hw-vuln/mds.rst
index 2d19c9f4c1fe..48ca0bd85604 100644
--- a/Documentation/admin-guide/hw-vuln/mds.rst
+++ b/Documentation/admin-guide/hw-vuln/mds.rst
@@ -58,14 +58,14 @@ Because the buffers are potentially shared between Hyper-Threads cross
 Hyper-Thread attacks are possible.
 
 Deeper technical information is available in the MDS specific x86
-architecture section: :ref:`Documentation/x86/mds.rst <mds>`.
+architecture section: :ref:`Documentation/arch/x86/mds.rst <mds>`.
 
 
 Attack scenarios
 ----------------
 
-Attacks against the MDS vulnerabilities can be mounted from malicious non
-priviledged user space applications running on hosts or guest. Malicious
+Attacks against the MDS vulnerabilities can be mounted from malicious non-
+privileged user space applications running on hosts or guest. Malicious
 guest OSes can obviously mount attacks as well.
 
 Contrary to other speculation based vulnerabilities the MDS vulnerability
diff --git a/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst b/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
new file mode 100644
index 000000000000..c98fd11907cc
--- /dev/null
+++ b/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
@@ -0,0 +1,260 @@
+=========================================
+Processor MMIO Stale Data Vulnerabilities
+=========================================
+
+Processor MMIO Stale Data Vulnerabilities are a class of memory-mapped I/O
+(MMIO) vulnerabilities that can expose data. The sequences of operations for
+exposing data range from simple to very complex. Because most of the
+vulnerabilities require the attacker to have access to MMIO, many environments
+are not affected. System environments using virtualization where MMIO access is
+provided to untrusted guests may need mitigation. These vulnerabilities are
+not transient execution attacks. However, these vulnerabilities may propagate
+stale data into core fill buffers where the data can subsequently be inferred
+by an unmitigated transient execution attack. Mitigation for these
+vulnerabilities includes a combination of microcode update and software
+changes, depending on the platform and usage model. Some of these mitigations
+are similar to those used to mitigate Microarchitectural Data Sampling (MDS) or
+those used to mitigate Special Register Buffer Data Sampling (SRBDS).
+
+Data Propagators
+================
+Propagators are operations that result in stale data being copied or moved from
+one microarchitectural buffer or register to another. Processor MMIO Stale Data
+Vulnerabilities are operations that may result in stale data being directly
+read into an architectural, software-visible state or sampled from a buffer or
+register.
+
+Fill Buffer Stale Data Propagator (FBSDP)
+-----------------------------------------
+Stale data may propagate from fill buffers (FB) into the non-coherent portion
+of the uncore on some non-coherent writes. Fill buffer propagation by itself
+does not make stale data architecturally visible. Stale data must be propagated
+to a location where it is subject to reading or sampling.
+
+Sideband Stale Data Propagator (SSDP)
+-------------------------------------
+The sideband stale data propagator (SSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. The sideband response buffer is
+shared by all client cores. For non-coherent reads that go to sideband
+destinations, the uncore logic returns 64 bytes of data to the core, including
+both requested data and unrequested stale data, from a transaction buffer and
+the sideband response buffer. As a result, stale data from the sideband
+response and transaction buffers may now reside in a core fill buffer.
+
+Primary Stale Data Propagator (PSDP)
+------------------------------------
+The primary stale data propagator (PSDP) is limited to the client (including
+Intel Xeon server E3) uncore implementation. Similar to the sideband response
+buffer, the primary response buffer is shared by all client cores. For some
+processors, MMIO primary reads will return 64 bytes of data to the core fill
+buffer including both requested data and unrequested stale data. This is
+similar to the sideband stale data propagator.
+
+Vulnerabilities
+===============
+Device Register Partial Write (DRPW) (CVE-2022-21166)
+-----------------------------------------------------
+Some endpoint MMIO registers incorrectly handle writes that are smaller than
+the register size. Instead of aborting the write or only copying the correct
+subset of bytes (for example, 2 bytes for a 2-byte write), more bytes than
+specified by the write transaction may be written to the register. On
+processors affected by FBSDP, this may expose stale data from the fill buffers
+of the core that created the write transaction.
+
+Shared Buffers Data Sampling (SBDS) (CVE-2022-21125)
+----------------------------------------------------
+After propagators may have moved data around the uncore and copied stale data
+into client core fill buffers, processors affected by MFBDS can leak data from
+the fill buffer. It is limited to the client (including Intel Xeon server E3)
+uncore implementation.
+
+Shared Buffers Data Read (SBDR) (CVE-2022-21123)
+------------------------------------------------
+It is similar to Shared Buffer Data Sampling (SBDS) except that the data is
+directly read into the architectural software-visible state. It is limited to
+the client (including Intel Xeon server E3) uncore implementation.
+
+Affected Processors
+===================
+Not all the CPUs are affected by all the variants. For instance, most
+processors for the server market (excluding Intel Xeon E3 processors) are
+impacted by only Device Register Partial Write (DRPW).
+
+Below is the list of affected Intel processors [#f1]_:
+
+   ===================  ============  =========
+   Common name          Family_Model  Steppings
+   ===================  ============  =========
+   HASWELL_X            06_3FH        2,4
+   SKYLAKE_L            06_4EH        3
+   BROADWELL_X          06_4FH        All
+   SKYLAKE_X            06_55H        3,4,6,7,11
+   BROADWELL_D          06_56H        3,4,5
+   SKYLAKE              06_5EH        3
+   ICELAKE_X            06_6AH        4,5,6
+   ICELAKE_D            06_6CH        1
+   ICELAKE_L            06_7EH        5
+   ATOM_TREMONT_D       06_86H        All
+   LAKEFIELD            06_8AH        1
+   KABYLAKE_L           06_8EH        9 to 12
+   ATOM_TREMONT         06_96H        1
+   ATOM_TREMONT_L       06_9CH        0
+   KABYLAKE             06_9EH        9 to 13
+   COMETLAKE            06_A5H        2,3,5
+   COMETLAKE_L          06_A6H        0,1
+   ROCKETLAKE           06_A7H        1
+   ===================  ============  =========
+
+If a CPU is in the affected processor list, but not affected by a variant, it
+is indicated by new bits in MSR IA32_ARCH_CAPABILITIES. As described in a later
+section, mitigation largely remains the same for all the variants, i.e. to
+clear the CPU fill buffers via VERW instruction.
+
+New bits in MSRs
+================
+Newer processors and microcode update on existing affected processors added new
+bits to IA32_ARCH_CAPABILITIES MSR. These bits can be used to enumerate
+specific variants of Processor MMIO Stale Data vulnerabilities and mitigation
+capability.
+
+MSR IA32_ARCH_CAPABILITIES
+--------------------------
+Bit 13 - SBDR_SSDP_NO - When set, processor is not affected by either the
+	 Shared Buffers Data Read (SBDR) vulnerability or the sideband stale
+	 data propagator (SSDP).
+Bit 14 - FBSDP_NO - When set, processor is not affected by the Fill Buffer
+	 Stale Data Propagator (FBSDP).
+Bit 15 - PSDP_NO - When set, processor is not affected by Primary Stale Data
+	 Propagator (PSDP).
+Bit 17 - FB_CLEAR - When set, VERW instruction will overwrite CPU fill buffer
+	 values as part of MD_CLEAR operations. Processors that do not
+	 enumerate MDS_NO (meaning they are affected by MDS) but that do
+	 enumerate support for both L1D_FLUSH and MD_CLEAR implicitly enumerate
+	 FB_CLEAR as part of their MD_CLEAR support.
+Bit 18 - FB_CLEAR_CTRL - Processor supports read and write to MSR
+	 IA32_MCU_OPT_CTRL[FB_CLEAR_DIS]. On such processors, the FB_CLEAR_DIS
+	 bit can be set to cause the VERW instruction to not perform the
+	 FB_CLEAR action. Not all processors that support FB_CLEAR will support
+	 FB_CLEAR_CTRL.
+
+MSR IA32_MCU_OPT_CTRL
+---------------------
+Bit 3 - FB_CLEAR_DIS - When set, VERW instruction does not perform the FB_CLEAR
+action. This may be useful to reduce the performance impact of FB_CLEAR in
+cases where system software deems it warranted (for example, when performance
+is more critical, or the untrusted software has no MMIO access). Note that
+FB_CLEAR_DIS has no impact on enumeration (for example, it does not change
+FB_CLEAR or MD_CLEAR enumeration) and it may not be supported on all processors
+that enumerate FB_CLEAR.
+
+Mitigation
+==========
+Like MDS, all variants of Processor MMIO Stale Data vulnerabilities  have the
+same mitigation strategy to force the CPU to clear the affected buffers before
+an attacker can extract the secrets.
+
+This is achieved by using the otherwise unused and obsolete VERW instruction in
+combination with a microcode update. The microcode clears the affected CPU
+buffers when the VERW instruction is executed.
+
+Kernel reuses the MDS function to invoke the buffer clearing:
+
+	mds_clear_cpu_buffers()
+
+On MDS affected CPUs, the kernel already invokes CPU buffer clear on
+kernel/userspace, hypervisor/guest and C-state (idle) transitions. No
+additional mitigation is needed on such CPUs.
+
+For CPUs not affected by MDS or TAA, mitigation is needed only for the attacker
+with MMIO capability. Therefore, VERW is not required for kernel/userspace. For
+virtualization case, VERW is only needed at VMENTER for a guest with MMIO
+capability.
+
+Mitigation points
+-----------------
+Return to user space
+^^^^^^^^^^^^^^^^^^^^
+Same mitigation as MDS when affected by MDS/TAA, otherwise no mitigation
+needed.
+
+C-State transition
+^^^^^^^^^^^^^^^^^^
+Control register writes by CPU during C-state transition can propagate data
+from fill buffer to uncore buffers. Execute VERW before C-state transition to
+clear CPU fill buffers.
+
+Guest entry point
+^^^^^^^^^^^^^^^^^
+Same mitigation as MDS when processor is also affected by MDS/TAA, otherwise
+execute VERW at VMENTER only for MMIO capable guests. On CPUs not affected by
+MDS/TAA, guest without MMIO access cannot extract secrets using Processor MMIO
+Stale Data vulnerabilities, so there is no need to execute VERW for such guests.
+
+Mitigation control on the kernel command line
+---------------------------------------------
+The kernel command line allows to control the Processor MMIO Stale Data
+mitigations at boot time with the option "mmio_stale_data=". The valid
+arguments for this option are:
+
+  ==========  =================================================================
+  full        If the CPU is vulnerable, enable mitigation; CPU buffer clearing
+              on exit to userspace and when entering a VM. Idle transitions are
+              protected as well. It does not automatically disable SMT.
+  full,nosmt  Same as full, with SMT disabled on vulnerable CPUs. This is the
+              complete mitigation.
+  off         Disables mitigation completely.
+  ==========  =================================================================
+
+If the CPU is affected and mmio_stale_data=off is not supplied on the kernel
+command line, then the kernel selects the appropriate mitigation.
+
+Mitigation status information
+-----------------------------
+The Linux kernel provides a sysfs interface to enumerate the current
+vulnerability status of the system: whether the system is vulnerable, and
+which mitigations are active. The relevant sysfs file is:
+
+	/sys/devices/system/cpu/vulnerabilities/mmio_stale_data
+
+The possible values in this file are:
+
+  .. list-table::
+
+     * - 'Not affected'
+       - The processor is not vulnerable
+     * - 'Vulnerable'
+       - The processor is vulnerable, but no mitigation enabled
+     * - 'Vulnerable: Clear CPU buffers attempted, no microcode'
+       - The processor is vulnerable, but microcode is not updated. The
+         mitigation is enabled on a best effort basis.
+     * - 'Mitigation: Clear CPU buffers'
+       - The processor is vulnerable and the CPU buffer clearing mitigation is
+         enabled.
+     * - 'Unknown: No mitigations'
+       - The processor vulnerability status is unknown because it is
+	 out of Servicing period. Mitigation is not attempted.
+
+Definitions:
+------------
+
+Servicing period: The process of providing functional and security updates to
+Intel processors or platforms, utilizing the Intel Platform Update (IPU)
+process or other similar mechanisms.
+
+End of Servicing Updates (ESU): ESU is the date at which Intel will no
+longer provide Servicing, such as through IPU or other similar update
+processes. ESU dates will typically be aligned to end of quarter.
+
+If the processor is vulnerable then the following information is appended to
+the above information:
+
+  ========================  ===========================================
+  'SMT vulnerable'          SMT is enabled
+  'SMT disabled'            SMT is disabled
+  'SMT Host state unknown'  Kernel runs in a VM, Host SMT state unknown
+  ========================  ===========================================
+
+References
+----------
+.. [#f1] Affected Processors
+   https://www.intel.com/content/www/us/en/developer/topic-technology/software-security-guidance/processors-affected-consolidated-product-cpu-model.html
diff --git a/Documentation/admin-guide/hw-vuln/spectre.rst b/Documentation/admin-guide/hw-vuln/spectre.rst
index e05e581af5cf..4d186f599d90 100644
--- a/Documentation/admin-guide/hw-vuln/spectre.rst
+++ b/Documentation/admin-guide/hw-vuln/spectre.rst
@@ -60,8 +60,8 @@ privileged data touched during the speculative execution.
 Spectre variant 1 attacks take advantage of speculative execution of
 conditional branches, while Spectre variant 2 attacks use speculative
 execution of indirect branches to leak privileged memory.
-See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[7] <spec_ref7>`
-:ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
+See :ref:`[1] <spec_ref1>` :ref:`[5] <spec_ref5>` :ref:`[6] <spec_ref6>`
+:ref:`[7] <spec_ref7>` :ref:`[10] <spec_ref10>` :ref:`[11] <spec_ref11>`.
 
 Spectre variant 1 (Bounds Check Bypass)
 ---------------------------------------
@@ -131,6 +131,19 @@ steer its indirect branch speculations to gadget code, and measure the
 speculative execution's side effects left in level 1 cache to infer the
 victim's data.
 
+Yet another variant 2 attack vector is for the attacker to poison the
+Branch History Buffer (BHB) to speculatively steer an indirect branch
+to a specific Branch Target Buffer (BTB) entry, even if the entry isn't
+associated with the source address of the indirect branch. Specifically,
+the BHB might be shared across privilege levels even in the presence of
+Enhanced IBRS.
+
+Currently the only known real-world BHB attack vector is via
+unprivileged eBPF. Therefore, it's highly recommended to not enable
+unprivileged eBPF, especially when eIBRS is used (without retpolines).
+For a full mitigation against BHB attacks, it's recommended to use
+retpolines (or eIBRS combined with retpolines).
+
 Attack scenarios
 ----------------
 
@@ -364,13 +377,15 @@ The possible values in this file are:
 
   - Kernel status:
 
-  ====================================  =================================
-  'Not affected'                        The processor is not vulnerable
-  'Vulnerable'                          Vulnerable, no mitigation
-  'Mitigation: Full generic retpoline'  Software-focused mitigation
-  'Mitigation: Full AMD retpoline'      AMD-specific software mitigation
-  'Mitigation: Enhanced IBRS'           Hardware-focused mitigation
-  ====================================  =================================
+  ========================================  =================================
+  'Not affected'                            The processor is not vulnerable
+  'Mitigation: None'                        Vulnerable, no mitigation
+  'Mitigation: Retpolines'                  Use Retpoline thunks
+  'Mitigation: LFENCE'                      Use LFENCE instructions
+  'Mitigation: Enhanced IBRS'               Hardware-focused mitigation
+  'Mitigation: Enhanced IBRS + Retpolines'  Hardware-focused + Retpolines
+  'Mitigation: Enhanced IBRS + LFENCE'      Hardware-focused + LFENCE
+  ========================================  =================================
 
   - Firmware status: Show if Indirect Branch Restricted Speculation (IBRS) is
     used to protect against Spectre variant 2 attacks when calling firmware (x86 only).
@@ -407,6 +422,14 @@ The possible values in this file are:
   'RSB filling'   Protection of RSB on context switch enabled
   =============   ===========================================
 
+  - EIBRS Post-barrier Return Stack Buffer (PBRSB) protection status:
+
+  ===========================  =======================================================
+  'PBRSB-eIBRS: SW sequence'   CPU is affected and protection of RSB on VMEXIT enabled
+  'PBRSB-eIBRS: Vulnerable'    CPU is vulnerable
+  'PBRSB-eIBRS: Not affected'  CPU is not affected by PBRSB
+  ===========================  =======================================================
+
 Full mitigation might require a microcode update from the CPU
 vendor. When the necessary microcode is not available, the kernel will
 report vulnerability.
@@ -456,8 +479,16 @@ Spectre variant 2
    On Intel Skylake-era systems the mitigation covers most, but not all,
    cases. See :ref:`[3] <spec_ref3>` for more details.
 
-   On CPUs with hardware mitigation for Spectre variant 2 (e.g. Enhanced
-   IBRS on x86), retpoline is automatically disabled at run time.
+   On CPUs with hardware mitigation for Spectre variant 2 (e.g. IBRS
+   or enhanced IBRS on x86), retpoline is automatically disabled at run time.
+
+   Systems which support enhanced IBRS (eIBRS) enable IBRS protection once at
+   boot, by setting the IBRS bit, and they're automatically protected against
+   Spectre v2 variant attacks, including cross-thread branch target injections
+   on SMT systems (STIBP). In other words, eIBRS enables STIBP too.
+
+   Legacy IBRS systems clear the IBRS bit on exit to userspace and
+   therefore explicitly enable STIBP for that
 
    The retpoline mitigation is turned on by default on vulnerable
    CPUs. It can be forced on or off by the administrator
@@ -468,7 +499,7 @@ Spectre variant 2
    before invoking any firmware code to prevent Spectre variant 2 exploits
    using the firmware.
 
-   Using kernel address space randomization (CONFIG_RANDOMIZE_SLAB=y
+   Using kernel address space randomization (CONFIG_RANDOMIZE_BASE=y
    and CONFIG_SLAB_FREELIST_RANDOM=y in the kernel configuration) makes
    attacks on the kernel generally more difficult.
 
@@ -481,18 +512,20 @@ Spectre variant 2
    For Spectre variant 2 mitigation, individual user programs
    can be compiled with return trampolines for indirect branches.
    This protects them from consuming poisoned entries in the branch
-   target buffer left by malicious software.  Alternatively, the
-   programs can disable their indirect branch speculation via prctl()
-   (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
+   target buffer left by malicious software.
+
+   On legacy IBRS systems, at return to userspace, implicit STIBP is disabled
+   because the kernel clears the IBRS bit. In this case, the userspace programs
+   can disable indirect branch speculation via prctl() (See
+   :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
    On x86, this will turn on STIBP to guard against attacks from the
    sibling thread when the user program is running, and use IBPB to
    flush the branch target buffer when switching to/from the program.
 
    Restricting indirect branch speculation on a user program will
    also prevent the program from launching a variant 2 attack
-   on x86.  All sand-boxed SECCOMP programs have indirect branch
-   speculation restricted by default.  Administrators can change
-   that behavior via the kernel command line and sysfs control files.
+   on x86.  Administrators can change that behavior via the kernel
+   command line and sysfs control files.
    See :ref:`spectre_mitigation_control_command_line`.
 
    Programs that disable their indirect branch speculation will have
@@ -584,71 +617,26 @@ kernel command line.
 
 		Specific mitigations can also be selected manually:
 
-		retpoline
-					replace indirect branches
-		retpoline,generic
-					google's original retpoline
-		retpoline,amd
-					AMD-specific minimal thunk
+                retpoline               auto pick between generic,lfence
+                retpoline,generic       Retpolines
+                retpoline,lfence        LFENCE; indirect branch
+                retpoline,amd           alias for retpoline,lfence
+                eibrs                   Enhanced/Auto IBRS
+                eibrs,retpoline         Enhanced/Auto IBRS + Retpolines
+                eibrs,lfence            Enhanced/Auto IBRS + LFENCE
+                ibrs                    use IBRS to protect kernel
 
 		Not specifying this option is equivalent to
 		spectre_v2=auto.
 
-For user space mitigation:
-
-        spectre_v2_user=
-
-		[X86] Control mitigation of Spectre variant 2
-		(indirect branch speculation) vulnerability between
-		user space tasks
-
-		on
-			Unconditionally enable mitigations. Is
-			enforced by spectre_v2=on
-
-		off
-			Unconditionally disable mitigations. Is
-			enforced by spectre_v2=off
-
-		prctl
-			Indirect branch speculation is enabled,
-			but mitigation can be enabled via prctl
-			per thread. The mitigation control state
-			is inherited on fork.
-
-		prctl,ibpb
-			Like "prctl" above, but only STIBP is
-			controlled per thread. IBPB is issued
-			always when switching between different user
-			space processes.
-
-		seccomp
-			Same as "prctl" above, but all seccomp
-			threads will enable the mitigation unless
-			they explicitly opt out.
-
-		seccomp,ibpb
-			Like "seccomp" above, but only STIBP is
-			controlled per thread. IBPB is issued
-			always when switching between different
-			user space processes.
-
-		auto
-			Kernel selects the mitigation depending on
-			the available CPU features and vulnerability.
-
-		Default mitigation:
-		If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl"
-
-		Not specifying this option is equivalent to
-		spectre_v2_user=auto.
-
 		In general the kernel by default selects
 		reasonable mitigations for the current CPU. To
 		disable Spectre variant 2 mitigations, boot with
 		spectre_v2=off. Spectre variant 1 mitigations
 		cannot be disabled.
 
+For spectre_v2_user see Documentation/admin-guide/kernel-parameters.txt
+
 Mitigation selection guide
 --------------------------
 
@@ -674,9 +662,8 @@ Mitigation selection guide
    off by disabling their indirect branch speculation when they are run
    (See :ref:`Documentation/userspace-api/spec_ctrl.rst <set_spec_ctrl>`).
    This prevents untrusted programs from polluting the branch target
-   buffer.  All programs running in SECCOMP sandboxes have indirect
-   branch speculation restricted by default. This behavior can be
-   changed via the kernel command line and sysfs control files. See
+   buffer.  This behavior can be changed via the kernel command line
+   and sysfs control files. See
    :ref:`spectre_mitigation_control_command_line`.
 
 3. High security mode
@@ -730,7 +717,7 @@ AMD white papers:
 
 .. _spec_ref6:
 
-[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/90343-B_SoftwareTechniquesforManagingSpeculation_WP_7-18Update_FNL.pdf>`_.
+[6] `Software techniques for managing speculation on AMD processors <https://developer.amd.com/wp-content/resources/Managing-Speculation-on-AMD-Processors.pdf>`_.
 
 ARM white papers:
 
diff --git a/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst b/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst
index 76673affd917..014167ef8dd1 100644
--- a/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst
+++ b/Documentation/admin-guide/hw-vuln/tsx_async_abort.rst
@@ -63,7 +63,7 @@ attacker needs to begin a TSX transaction and raise an asynchronous abort
 which in turn potentially leaks data stored in the buffers.
 
 More detailed technical information is available in the TAA specific x86
-architecture section: :ref:`Documentation/x86/tsx_async_abort.rst <tsx_async_abort>`.
+architecture section: :ref:`Documentation/arch/x86/tsx_async_abort.rst <tsx_async_abort>`.
 
 
 Attack scenarios
diff --git a/Documentation/admin-guide/hw_random.rst b/Documentation/admin-guide/hw_random.rst
index 121de96e395e..d494601717f1 100644
--- a/Documentation/admin-guide/hw_random.rst
+++ b/Documentation/admin-guide/hw_random.rst
@@ -1,6 +1,6 @@
-==========================================================
-Linux support for random number generator in i8xx chipsets
-==========================================================
+=================================
+Hardware random number generators
+=================================
 
 Introduction
 ============
diff --git a/Documentation/admin-guide/index.rst b/Documentation/admin-guide/index.rst
index dc00afcabb95..43ea35613dfc 100644
--- a/Documentation/admin-guide/index.rst
+++ b/Documentation/admin-guide/index.rst
@@ -35,7 +35,8 @@ problems and bugs in particular.
    :maxdepth: 1
 
    reporting-issues
-   security-bugs
+   reporting-regressions
+   quickly-build-trimmed-linux
    bug-hunting
    bug-bisect
    tainted-kernels
@@ -55,6 +56,17 @@ ABI will be found here.
 
    sysfs-rules
 
+This is the beginning of a section with information of interest to
+application developers and system integrators doing analysis of the
+Linux kernel for safety critical applications. Documents supporting
+analysis of kernel interactions with applications, and key kernel
+subsystems expectations will be found here.
+
+.. toctree::
+   :maxdepth: 1
+
+   workload-tracing
+
 The rest of this manual consists of various unordered guides on how to
 configure specific aspects of kernel behavior to your liking.
 
@@ -82,6 +94,7 @@ configure specific aspects of kernel behavior to your liking.
    edid
    efi-stub
    ext4
+   filesystem-monitoring
    nfs/index
    gpio/index
    highuid
@@ -114,6 +127,7 @@ configure specific aspects of kernel behavior to your liking.
    svga
    syscall-user-dispatch
    sysrq
+   thermal/index
    thunderbolt
    ufs
    unicode
diff --git a/Documentation/admin-guide/iostats.rst b/Documentation/admin-guide/iostats.rst
index 9b14b0c2c9c4..609a3201fd4e 100644
--- a/Documentation/admin-guide/iostats.rst
+++ b/Documentation/admin-guide/iostats.rst
@@ -76,7 +76,7 @@ Field  3 -- # of sectors read (unsigned long)
 
 Field  4 -- # of milliseconds spent reading (unsigned int)
     This is the total number of milliseconds spent by all reads (as
-    measured from __make_request() to end_that_request_last()).
+    measured from blk_mq_alloc_request() to __blk_mq_end_request()).
 
 Field  5 -- # of writes completed (unsigned long)
     This is the total number of writes completed successfully.
@@ -89,7 +89,7 @@ Field  7 -- # of sectors written (unsigned long)
 
 Field  8 -- # of milliseconds spent writing (unsigned int)
     This is the total number of milliseconds spent by all writes (as
-    measured from __make_request() to end_that_request_last()).
+    measured from blk_mq_alloc_request() to __blk_mq_end_request()).
 
 Field  9 -- # of I/Os currently in progress (unsigned int)
     The only field that should go to zero. Incremented as requests are
@@ -120,7 +120,7 @@ Field 14 -- # of sectors discarded (unsigned long)
 
 Field 15 -- # of milliseconds spent discarding (unsigned int)
     This is the total number of milliseconds spent by all discards (as
-    measured from __make_request() to end_that_request_last()).
+    measured from blk_mq_alloc_request() to __blk_mq_end_request()).
 
 Field 16 -- # of flush requests completed
     This is the total number of flush requests completed successfully.
diff --git a/Documentation/admin-guide/kdump/gdbmacros.txt b/Documentation/admin-guide/kdump/gdbmacros.txt
index 82aecdcae8a6..030de95e3e6b 100644
--- a/Documentation/admin-guide/kdump/gdbmacros.txt
+++ b/Documentation/admin-guide/kdump/gdbmacros.txt
@@ -312,10 +312,10 @@ define dmesg
 			set var $prev_flags = $info->flags
 		end
 
-		set var $id = ($id + 1) & $id_mask
 		if ($id == $end_id)
 			loop_break
 		end
+		set var $id = ($id + 1) & $id_mask
 	end
 end
 document dmesg
diff --git a/Documentation/admin-guide/kdump/kdump.rst b/Documentation/admin-guide/kdump/kdump.rst
index cb30ca3df27c..a748e7eb4429 100644
--- a/Documentation/admin-guide/kdump/kdump.rst
+++ b/Documentation/admin-guide/kdump/kdump.rst
@@ -146,9 +146,9 @@ System kernel config options
 	CONFIG_SYSFS=y
 
    Note that "sysfs file system support" might not appear in the "Pseudo
-   filesystems" menu if "Configure standard kernel features (for small
-   systems)" is not enabled in "General Setup." In this case, check the
-   .config file itself to ensure that sysfs is turned on, as follows::
+   filesystems" menu if "Configure standard kernel features (expert users)"
+   is not enabled in "General Setup." In this case, check the .config file
+   itself to ensure that sysfs is turned on, as follows::
 
 	grep 'CONFIG_SYSFS' .config
 
@@ -533,6 +533,10 @@ the following command::
 
    cp /proc/vmcore <dump-file>
 
+or use scp to write out the dump file between hosts on a network, e.g::
+
+   scp /proc/vmcore remote_username@remote_ip:<dump-file>
+
 You can also use makedumpfile utility to write out the dump file
 with specified options to filter out unwanted contents, e.g::
 
diff --git a/Documentation/admin-guide/kdump/vmcoreinfo.rst b/Documentation/admin-guide/kdump/vmcoreinfo.rst
index 3861a25faae1..c18d94fa6470 100644
--- a/Documentation/admin-guide/kdump/vmcoreinfo.rst
+++ b/Documentation/admin-guide/kdump/vmcoreinfo.rst
@@ -172,7 +172,7 @@ variables.
 Offset of the free_list's member. This value is used to compute the number
 of free pages.
 
-Each zone has a free_area structure array called free_area[MAX_ORDER].
+Each zone has a free_area structure array called free_area[MAX_ORDER + 1].
 The free_list represents a linked list of free page blocks.
 
 (list_head, next|prev)
@@ -189,8 +189,8 @@ Offsets of the vmap_area's members. They carry vmalloc-specific
 information. Makedumpfile gets the start address of the vmalloc region
 from this.
 
-(zone.free_area, MAX_ORDER)
----------------------------
+(zone.free_area, MAX_ORDER + 1)
+-------------------------------
 
 Free areas descriptor. User-space tools use this value to iterate the
 free_area ranges. MAX_ORDER is used by the zone buddy allocator.
@@ -200,7 +200,7 @@ prb
 
 A pointer to the printk ringbuffer (struct printk_ringbuffer). This
 may be pointing to the static boot ringbuffer or the dynamically
-allocated ringbuffer, depending on when the the core dump occurred.
+allocated ringbuffer, depending on when the core dump occurred.
 Used by user-space tools to read the active kernel log buffer.
 
 printk_rb_static
@@ -494,6 +494,14 @@ architecture which is used to lookup the page-tables for the Virtual
 addresses in the higher VA range (refer to ARMv8 ARM document for
 more details).
 
+MODULES_VADDR|MODULES_END|VMALLOC_START|VMALLOC_END|VMEMMAP_START|VMEMMAP_END
+-----------------------------------------------------------------------------
+
+Used to get the correct ranges:
+	MODULES_VADDR ~ MODULES_END-1 : Kernel module space.
+	VMALLOC_START ~ VMALLOC_END-1 : vmalloc() / ioremap() space.
+	VMEMMAP_START ~ VMEMMAP_END-1 : vmemmap region, used for struct page array.
+
 arm
 ===
 
@@ -587,3 +595,32 @@ X2TLB
 -----
 
 Indicates whether the crashed kernel enabled SH extended mode.
+
+RISCV64
+=======
+
+VA_BITS
+-------
+
+The maximum number of bits for virtual addresses. Used to compute the
+virtual memory ranges.
+
+PAGE_OFFSET
+-----------
+
+Indicates the virtual kernel start address of the direct-mapped RAM region.
+
+phys_ram_base
+-------------
+
+Indicates the start physical RAM address.
+
+MODULES_VADDR|MODULES_END|VMALLOC_START|VMALLOC_END|VMEMMAP_START|VMEMMAP_END|KERNEL_LINK_ADDR
+----------------------------------------------------------------------------------------------
+
+Used to get the correct ranges:
+
+  * MODULES_VADDR ~ MODULES_END : Kernel module space.
+  * VMALLOC_START ~ VMALLOC_END : vmalloc() / ioremap() space.
+  * VMEMMAP_START ~ VMEMMAP_END : vmemmap space, used for struct page array.
+  * KERNEL_LINK_ADDR : start address of Kernel link and BPF
diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst
index 01ba293a2d70..1ba8f2a44aac 100644
--- a/Documentation/admin-guide/kernel-parameters.rst
+++ b/Documentation/admin-guide/kernel-parameters.rst
@@ -99,6 +99,7 @@ parameter is applicable::
 	ALSA	ALSA sound support is enabled.
 	APIC	APIC support is enabled.
 	APM	Advanced Power Management support is enabled.
+	APPARMOR AppArmor support is enabled.
 	ARM	ARM architecture is enabled.
 	ARM64	ARM64 architecture is enabled.
 	AX25	Appropriate AX.25 support is enabled.
@@ -108,15 +109,15 @@ parameter is applicable::
 	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
 	EDD	BIOS Enhanced Disk Drive Services (EDD) is enabled
 	EFI	EFI Partitioning (GPT) is enabled
-	EIDE	EIDE/ATAPI support is enabled.
 	EVM	Extended Verification Module
 	FB	The frame buffer device is enabled.
 	FTRACE	Function tracing enabled.
 	GCOV	GCOV profiling is enabled.
+	HIBERNATION HIBERNATION is enabled.
 	HW	Appropriate hardware is enabled.
+	HYPER_V HYPERV support is enabled.
 	IA-64	IA-64 architecture is enabled.
 	IMA     Integrity measurement architecture is enabled.
-	IOSCHED	More than one I/O scheduler is enabled.
 	IP_PNP	IP DHCP, BOOTP, or RARP is enabled.
 	IPV6	IPv6 support is enabled.
 	ISAPNP	ISA PnP code is enabled.
@@ -127,10 +128,11 @@ parameter is applicable::
 	KVM	Kernel Virtual Machine support is enabled.
 	LIBATA  Libata driver is enabled
 	LP	Printer support is enabled.
+	LOONGARCH LoongArch architecture is enabled.
 	LOOP	Loopback device support is enabled.
 	M68k	M68k architecture is enabled.
 			These options have more detailed description inside of
-			Documentation/m68k/kernel-options.rst.
+			Documentation/arch/m68k/kernel-options.rst.
 	MDA	MDA console support is enabled.
 	MIPS	MIPS architecture is enabled.
 	MOUSE	Appropriate mouse support is enabled.
@@ -140,9 +142,7 @@ parameter is applicable::
 	NUMA	NUMA support is enabled.
 	NFS	Appropriate NFS support is enabled.
 	OF	Devicetree is enabled.
-	OSS	OSS sound support is enabled.
 	PV_OPS	A paravirtualized kernel is enabled.
-	PARIDE	The ParIDE (parallel port IDE) subsystem is enabled.
 	PARISC	The PA-RISC architecture is enabled.
 	PCI	PCI bus support is enabled.
 	PCIE	PCI Express support is enabled.
@@ -160,7 +160,6 @@ parameter is applicable::
 			the Documentation/scsi/ sub-directory.
 	SECURITY Different security models are enabled.
 	SELINUX SELinux support is enabled.
-	APPARMOR AppArmor support is enabled.
 	SERIAL	Serial support is enabled.
 	SH	SuperH architecture is enabled.
 	SMP	The kernel is an SMP kernel.
@@ -168,7 +167,6 @@ parameter is applicable::
 	SWSUSP	Software suspend (hibernation) is enabled.
 	SUSPEND	System suspend states are enabled.
 	TPM	TPM drivers are enabled.
-	TS	Appropriate touchscreen support is enabled.
 	UMS	USB Mass Storage support is enabled.
 	USB	USB support is enabled.
 	USBHID	USB Human Interface Device support is enabled.
@@ -177,11 +175,10 @@ parameter is applicable::
 	VGA	The VGA console has been enabled.
 	VT	Virtual terminal support is enabled.
 	WDT	Watchdog support is enabled.
-	XT	IBM PC/XT MFM hard disk support is enabled.
 	X86-32	X86-32, aka i386 architecture is enabled.
 	X86-64	X86-64 architecture is enabled.
 			More X86-64 boot options can be found in
-			Documentation/x86/x86_64/boot-options.rst.
+			Documentation/arch/x86/x86_64/boot-options.rst.
 	X86	Either 32-bit or 64-bit x86 (same as X86-32+X86-64)
 	X86_UV	SGI UV support is enabled.
 	XEN	Xen support is enabled
@@ -196,10 +193,10 @@ In addition, the following text indicates that the option::
 Parameters denoted with BOOT are actually interpreted by the boot
 loader, and have no meaning to the kernel directly.
 Do not modify the syntax of boot loader parameters without extreme
-need or coordination with <Documentation/x86/boot.rst>.
+need or coordination with <Documentation/arch/x86/boot.rst>.
 
 There are also arch-specific kernel-parameters not documented here.
-See for example <Documentation/x86/x86_64/boot-options.rst>.
+See for example <Documentation/arch/x86/x86_64/boot-options.rst>.
 
 Note that ALL kernel parameters listed below are CASE SENSITIVE, and that
 a trailing = on the name of any parameter states that that parameter will
@@ -211,7 +208,7 @@ The number of kernel parameters is not limited, but the length of the
 complete command line (parameters including spaces etc.) is limited to
 a fixed number of characters. This limit depends on the architecture
 and is between 256 and 4096 characters. It is defined in the file
-./include/asm/setup.h as COMMAND_LINE_SIZE.
+./include/uapi/asm-generic/setup.h as COMMAND_LINE_SIZE.
 
 Finally, the [KMG] suffix is commonly described after a number of kernel
 parameter values. These 'K', 'M', and 'G' letters represent the _binary_
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 02eeda2a11ad..9e5bab29685f 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -225,14 +225,23 @@
 			For broken nForce2 BIOS resulting in XT-PIC timer.
 
 	acpi_sleep=	[HW,ACPI] Sleep options
-			Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
-				  old_ordering, nonvs, sci_force_enable, nobl }
+			Format: { s3_bios, s3_mode, s3_beep, s4_hwsig,
+				  s4_nohwsig, old_ordering, nonvs,
+				  sci_force_enable, nobl }
 			See Documentation/power/video.rst for information on
 			s3_bios and s3_mode.
 			s3_beep is for debugging; it makes the PC's speaker beep
 			as soon as the kernel's real-mode entry point is called.
+			s4_hwsig causes the kernel to check the ACPI hardware
+			signature during resume from hibernation, and gracefully
+			refuse to resume if it has changed. This complies with
+			the ACPI specification but not with reality, since
+			Windows does not do this and many laptops do change it
+			on docking. So the default behaviour is to allow resume
+			and simply warn when the signature changes, unless the
+			s4_hwsig option is enabled.
 			s4_nohwsig prevents ACPI hardware signature from being
-			used during resume from hibernation.
+			used (or even warned about) during resume.
 			old_ordering causes the ACPI 1.0 ordering of the _PTS
 			control method, with respect to putting devices into
 			low power states, to be enforced (the ACPI 2.0 ordering
@@ -312,6 +321,8 @@
 			force_enable - Force enable the IOMMU on platforms known
 				       to be buggy with IOMMU enabled. Use this
 				       option with care.
+			pgtbl_v1     - Use v1 page table for DMA-API (Default).
+			pgtbl_v2     - Use v2 page table for DMA-API.
 
 	amd_iommu_dump=	[HW,X86-64]
 			Enable AMD IOMMU driver option to dump the ACPI table
@@ -328,6 +339,29 @@
 			             This mode requires kvm-amd.avic=1.
 			             (Default when IOMMU HW support is present.)
 
+	amd_pstate=	[X86]
+			disable
+			  Do not enable amd_pstate as the default
+			  scaling driver for the supported processors
+			passive
+			  Use amd_pstate with passive mode as a scaling driver.
+			  In this mode autonomous selection is disabled.
+			  Driver requests a desired performance level and platform
+			  tries to match the same performance level if it is
+			  satisfied by guaranteed performance level.
+			active
+			  Use amd_pstate_epp driver instance as the scaling driver,
+			  driver provides a hint to the hardware if software wants
+			  to bias toward performance (0x0) or energy efficiency (0xff)
+			  to the CPPC firmware. then CPPC power algorithm will
+			  calculate the runtime workload and adjust the realtime cores
+			  frequency.
+			guided
+			  Activate guided autonomous mode. Driver requests minimum and
+			  maximum performance level and the platform autonomously
+			  selects a performance level in this range and appropriate
+			  to the current workload.
+
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>
@@ -367,18 +401,16 @@
 	autoconf=	[IPV6]
 			See Documentation/networking/ipv6.rst.
 
-	show_lapic=	[APIC,X86] Advanced Programmable Interrupt Controller
-			Limit apic dumping. The parameter defines the maximal
-			number of local apics being dumped. Also it is possible
-			to set it to "all" by meaning -- no limit here.
-			Format: { 1 (default) | 2 | ... | all }.
-			The parameter valid if only apic=debug or
-			apic=verbose is specified.
-			Example: apic=debug show_lapic=all
-
 	apm=		[APM] Advanced Power Management
 			See header of arch/x86/kernel/apm_32.c.
 
+	apparmor=	[APPARMOR] Disable or enable AppArmor at boot time
+			Format: { "0" | "1" }
+			See security/apparmor/Kconfig help text
+			0 -- disable.
+			1 -- enable.
+			Default value is set via kernel config option.
+
 	arcrimi=	[HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards
 			Format: <io>,<irq>,<nodeID>
 
@@ -391,6 +423,12 @@
 	arm64.nomte	[ARM64] Unconditionally disable Memory Tagging Extension
 			support
 
+	arm64.nosve	[ARM64] Unconditionally disable Scalable Vector
+			Extension support
+
+	arm64.nosme	[ARM64] Unconditionally disable Scalable Matrix
+			Extension support
+
 	ataflop=	[HW,M68k]
 
 	atarimouse=	[HW,MOUSE] Atari Mouse
@@ -452,13 +490,21 @@
 			Format: <io>,<irq>,<mode>
 			See header of drivers/net/hamradio/baycom_ser_hdx.c.
 
+	bert_disable	[ACPI]
+			Disable BERT OS support on buggy BIOSes.
+
+	bgrt_disable	[ACPI][X86]
+			Disable BGRT to avoid flickering OEM logo.
+
 	blkdevparts=	Manual partition parsing of block device(s) for
 			embedded devices based on command line input.
 			See Documentation/block/cmdline-partition.rst
 
 	boot_delay=	Milliseconds to delay each printk during boot.
-			Values larger than 10 seconds (10000) are changed to
-			no delay (0).
+			Only works if CONFIG_BOOT_PRINTK_DELAY is enabled,
+			and you may also have to specify "lpj=".  Boot_delay
+			values larger than 10 seconds (10000) are assumed
+			erroneous and ignored.
 			Format: integer
 
 	bootconfig	[KNL]
@@ -467,12 +513,6 @@
 
 			See Documentation/admin-guide/bootconfig.rst
 
-	bert_disable	[ACPI]
-			Disable BERT OS support on buggy BIOSes.
-
-	bgrt_disable	[ACPI][X86]
-			Disable BGRT to avoid flickering OEM logo.
-
 	bttv.card=	[HW,V4L] bttv (bt848 + bt878 based grabber cards)
 	bttv.radio=	Most important insmod options are available as
 			kernel args too.
@@ -540,8 +580,9 @@
 			Format: <string>
 			nosocket -- Disable socket memory accounting.
 			nokmem -- Disable kernel memory accounting.
+			nobpf -- Disable BPF memory accounting.
 
-	checkreqprot	[SELINUX] Set initial checkreqprot flag value.
+	checkreqprot=	[SELINUX] Set initial checkreqprot flag value.
 			Format: { "0" | "1" }
 			See security/selinux/Kconfig help text.
 			0 -- check protection applied by kernel (includes
@@ -554,6 +595,25 @@
 
 	cio_ignore=	[S390]
 			See Documentation/s390/common_io.rst for details.
+
+	clearcpuid=X[,X...] [X86]
+			Disable CPUID feature X for the kernel. See
+			arch/x86/include/asm/cpufeatures.h for the valid bit
+			numbers X. Note the Linux-specific bits are not necessarily
+			stable over kernel options, but the vendor-specific
+			ones should be.
+			X can also be a string as appearing in the flags: line
+			in /proc/cpuinfo which does not have the above
+			instability issue. However, not all features have names
+			in /proc/cpuinfo.
+			Note that using this option will taint your kernel.
+			Also note that user programs calling CPUID directly
+			or using the feature without checking anything
+			will still see it. This just prevents it from
+			being used by the kernel or shown in /proc/cpuinfo.
+			Also note the kernel might malfunction if you disable
+			some critical bits.
+
 	clk_ignore_unused
 			[CLK]
 			Prevents the clock framework from automatically gating
@@ -603,8 +663,8 @@
 	clocksource.max_cswd_read_retries= [KNL]
 			Number of clocksource_watchdog() retries due to
 			external delays before the clock will be marked
-			unstable.  Defaults to three retries, that is,
-			four attempts to read the clock under test.
+			unstable.  Defaults to two retries, that is,
+			three attempts to read the clock under test.
 
 	clocksource.verify_n_cpus= [KNL]
 			Limit the number of CPUs checked for clocksources
@@ -622,19 +682,6 @@
 			Defaults to zero when built as a module and to
 			10 seconds when built into the kernel.
 
-	clearcpuid=BITNUM[,BITNUM...] [X86]
-			Disable CPUID feature X for the kernel. See
-			arch/x86/include/asm/cpufeatures.h for the valid bit
-			numbers. Note the Linux specific bits are not necessarily
-			stable over kernel options, but the vendor specific
-			ones should be.
-			Also note that user programs calling CPUID directly
-			or using the feature without checking anything
-			will still see it. This just prevents it from
-			being used by the kernel or shown in /proc/cpuinfo.
-			Also note the kernel might malfunction if you disable
-			some critical bits.
-
 	cma=nn[MG]@[start[MG][-end[MG]]]
 			[KNL,CMA]
 			Sets the size of kernel global memory area for
@@ -649,7 +696,7 @@
 			Sets the size of kernel per-numa memory area for
 			contiguous memory allocations. A value of 0 disables
 			per-numa CMA altogether. And If this option is not
-			specificed, the default value is 0.
+			specified, the default value is 0.
 			With per-numa CMA enabled, DMA users on node nid will
 			first try to allocate buffer from the pernuma area
 			which is located in node nid, if the allocation fails,
@@ -680,6 +727,17 @@
 	condev=		[HW,S390] console device
 	conmode=
 
+	con3215_drop=	[S390] 3215 console drop mode.
+			Format: y|n|Y|N|1|0
+			When set to true, drop data on the 3215 console when
+			the console buffer is full. In this case the
+			operator using a 3270 terminal emulator (for example
+			x3270) does not have to enter the clear key for the
+			console output to advance and the kernel to continue.
+			This leads to a much faster boot time when a 3270
+			terminal emulator is active. If no 3270 terminal
+			emulator is used, this parameter has no effect.
+
 	console=	[KNL] Output console device and options.
 
 		tty<n>	Use the virtual console device <n>.
@@ -715,6 +773,12 @@
 		hvc<n>	Use the hypervisor console device <n>. This is for
 			both Xen and PowerPC hypervisors.
 
+		{ null | "" }
+			Use to disable console output, i.e., to have kernel
+			console messages discarded.
+			This must be the only console= parameter used on the
+			kernel command line.
+
 		If the device connected to the port is not a TTY but a braille
 		device, prepend "brl," before the device type, for instance
 			console=brl,ttyS0
@@ -750,6 +814,24 @@
 			0: default value, disable debugging
 			1: enable debugging at boot time
 
+	cpcihp_generic=	[HW,PCI] Generic port I/O CompactPCI driver
+			Format:
+			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
+
+	cpu0_hotplug	[X86] Turn on CPU0 hotplug feature when
+			CONFIG_BOOTPARAM_HOTPLUG_CPU0 is off.
+			Some features depend on CPU0. Known dependencies are:
+			1. Resume from suspend/hibernate depends on CPU0.
+			Suspend/hibernate will fail if CPU0 is offline and you
+			need to online CPU0 before suspend/hibernate.
+			2. PIC interrupts also depend on CPU0. CPU0 can't be
+			removed if a PIC interrupt is detected.
+			It's said poweroff/reboot may depend on CPU0 on some
+			machines although I haven't seen such issues so far
+			after CPU0 is offline on a few tested machines.
+			If the dependencies are under your control, you can
+			turn on cpu0_hotplug.
+
 	cpuidle.off=1	[CPU_IDLE]
 			disable the cpuidle sub-system
 
@@ -770,9 +852,13 @@
 			on every CPU online, such as boot, and resume from suspend.
 			Default: 10000
 
-	cpcihp_generic=	[HW,PCI] Generic port I/O CompactPCI driver
-			Format:
-			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
+	crash_kexec_post_notifiers
+			Run kdump after running panic-notifiers and dumping
+			kmsg. This only for the users who doubt kdump always
+			succeeds in any situation.
+			Note that this also increases risks of kdump failure,
+			because some panic notifiers can make the crashed
+			kernel more unstable.
 
 	crashkernel=size[KMG][@offset[KMG]]
 			[KNL] Using kexec, Linux can switch to a 'crash kernel'
@@ -780,7 +866,7 @@
 			memory region [offset, offset + size] for that kernel
 			image. If '@offset' is omitted, then a suitable offset
 			is selected automatically.
-			[KNL, X86-64] Select a region under 4G first, and
+			[KNL, X86-64, ARM64] Select a region under 4G first, and
 			fall back to reserve region above 4G when '@offset'
 			hasn't been specified.
 			See Documentation/admin-guide/kdump/kdump.rst for further details.
@@ -793,22 +879,25 @@
 			Documentation/admin-guide/kdump/kdump.rst for an example.
 
 	crashkernel=size[KMG],high
-			[KNL, X86-64] range could be above 4G. Allow kernel
+			[KNL, X86-64, ARM64] range could be above 4G. Allow kernel
 			to allocate physical memory region from top, so could
 			be above 4G if system have more than 4G ram installed.
 			Otherwise memory region will be allocated below 4G, if
 			available.
 			It will be ignored if crashkernel=X is specified.
 	crashkernel=size[KMG],low
-			[KNL, X86-64] range under 4G. When crashkernel=X,high
+			[KNL, X86-64, ARM64] range under 4G. When crashkernel=X,high
 			is passed, kernel could allocate physical memory region
 			above 4G, that cause second kernel crash on system
 			that require some amount of low memory, e.g. swiotlb
 			requires at least 64M+32K low memory, also enough extra
 			low memory is needed to make sure DMA buffers for 32-bit
-			devices won't run out. Kernel would try to allocate at
-			at least 256M below 4G automatically.
-			This one let user to specify own low range under 4G
+			devices won't run out. Kernel would try to allocate
+			default	size of memory below 4G automatically. The default
+			size is	platform dependent.
+			  --> x86: max(swiotlb_size_or_default() + 8MiB, 256MiB)
+			  --> arm64: 128MiB
+			This one lets the user specify own low range under 4G
 			for second kernel instead.
 			0: to disable low allocation.
 			It will be ignored when crashkernel=X,high is not used
@@ -823,15 +912,14 @@
 	cs89x0_media=	[HW,NET]
 			Format: { rj45 | aui | bnc }
 
-	csdlock_debug=	[KNL] Enable debug add-ons of cross-CPU function call
-			handling. When switched on, additional debug data is
-			printed to the console in case a hanging CPU is
-			detected, and that CPU is pinged again in order to try
-			to resolve the hang situation.
-			0: disable csdlock debugging (default)
-			1: enable basic csdlock debugging (minor impact)
-			ext: enable extended csdlock debugging (more impact,
-			     but more data)
+	csdlock_debug=	[KNL] Enable or disable debug add-ons of cross-CPU
+			function call handling. When switched on,
+			additional debug data is printed to the console
+			in case a hanging CPU is detected, and that
+			CPU is pinged again in order to try to resolve
+			the hang situation.  The default value of this
+			option depends on the CSD_LOCK_WAIT_DEBUG_DEFAULT
+			Kconfig option.
 
 	dasd=		[HW,NET]
 			See header of drivers/s390/block/dasd_devmap.c.
@@ -841,11 +929,6 @@
 			Format: <port#>,<type>
 			See also Documentation/input/devices/joystick-parport.rst
 
-	ddebug_query=	[KNL,DYNAMIC_DEBUG] Enable debug messages at early boot
-			time. See
-			Documentation/admin-guide/dynamic-debug-howto.rst for
-			details.  Deprecated, see dyndbg.
-
 	debug		[KNL] Enable kernel debugging (events log level).
 
 	debug_boot_weak_hash
@@ -868,9 +951,6 @@
 
 	debug_objects	[KNL] Enable object debugging
 
-	no_debug_objects
-			[KNL] Disable object debugging
-
 	debug_guardpage_minorder=
 			[KNL] When CONFIG_DEBUG_PAGEALLOC is set, this
 			parameter allows control of the order of pages that will
@@ -884,7 +964,7 @@
 			driver code when a CPU writes to (or reads from) a
 			random memory location. Note that there exists a class
 			of memory corruptions problems caused by buggy H/W or
-			F/W or by drivers badly programing DMA (basically when
+			F/W or by drivers badly programming DMA (basically when
 			memory is written at bus level and the CPU MMU is
 			bypassed) which are not detectable by
 			CONFIG_DEBUG_PAGEALLOC, hence this option will not help
@@ -916,10 +996,6 @@
 
 	debugpat	[X86] Enable PAT debugging
 
-	decnet.addr=	[HW,NET]
-			Format: <area>[,<node>]
-			See also Documentation/networking/decnet.rst.
-
 	default_hugepagesz=
 			[HW] The size of the default HugeTLB page. This is
 			the size represented by the legacy /proc/ hugepages
@@ -935,11 +1011,39 @@
 			[KNL] Debugging option to set a timeout in seconds for
 			deferred probe to give up waiting on dependencies to
 			probe. Only specific dependencies (subsystems or
-			drivers) that have opted in will be ignored. A timeout of 0
-			will timeout at the end of initcalls. This option will also
+			drivers) that have opted in will be ignored. A timeout
+			of 0 will timeout at the end of initcalls. If the time
+			out hasn't expired, it'll be restarted by each
+			successful driver registration. This option will also
 			dump out devices still on the deferred probe list after
 			retrying.
 
+	delayacct	[KNL] Enable per-task delay accounting
+
+	dell_smm_hwmon.ignore_dmi=
+			[HW] Continue probing hardware even if DMI data
+			indicates that the driver is running on unsupported
+			hardware.
+
+	dell_smm_hwmon.force=
+			[HW] Activate driver even if SMM BIOS signature does
+			not match list of supported models and enable otherwise
+			blacklisted features.
+
+	dell_smm_hwmon.power_status=
+			[HW] Report power status in /proc/i8k
+			(disabled by default).
+
+	dell_smm_hwmon.restricted=
+			[HW] Allow controlling fans only if SYS_ADMIN
+			capability is set.
+
+	dell_smm_hwmon.fan_mult=
+			[HW] Factor to multiply fan speed with.
+
+	dell_smm_hwmon.fan_max=
+			[HW] Maximum configurable fan speed.
+
 	dfltcc=		[HW,S390]
 			Format: { on | off | def_only | inf_only | always }
 			on:       s390 zlib hardware support for compression on
@@ -961,32 +1065,12 @@
 			can be useful when debugging issues that require an SLB
 			miss to occur.
 
-	stress_slb	[PPC]
-			Limits the number of kernel SLB entries, and flushes
-			them frequently to increase the rate of SLB faults
-			on kernel addresses.
-
 	disable=	[IPV6]
 			See Documentation/networking/ipv6.rst.
 
-	hardened_usercopy=
-                        [KNL] Under CONFIG_HARDENED_USERCOPY, whether
-                        hardening is enabled for this boot. Hardened
-                        usercopy checking is used to protect the kernel
-                        from reading or writing beyond known memory
-                        allocation boundaries as a proactive defense
-                        against bounds-checking flaws in the kernel's
-                        copy_to_user()/copy_from_user() interface.
-                on      Perform hardened usercopy checks (default).
-                off     Disable hardened usercopy checks.
-
 	disable_radix	[PPC]
 			Disable RADIX MMU mode on POWER9
 
-	radix_hcall_invalidate=on  [PPC/PSERIES]
-			Disable RADIX GTSE feature and use hcall for TLB
-			invalidate.
-
 	disable_tlbie	[PPC]
 			Disable TLBIE instruction. Currently does not work
 			with KVM, with HASH MMU, or with coherent accelerators.
@@ -1042,7 +1126,10 @@
 			driver later using sysfs.
 
 	driver_async_probe=  [KNL]
-			List of driver names to be probed asynchronously.
+			List of driver names to be probed asynchronously. *
+			matches with all driver names. If * is specified, the
+			rest of the listed driver names are those that will NOT
+			match the *.
 			Format: <driver_name1>,<driver_name2>...
 
 	drm.edid_firmware=[<connector>:]<file>[,[<connector>:]<file>]
@@ -1085,12 +1172,6 @@
 			Documentation/admin-guide/dynamic-debug-howto.rst
 			for details.
 
-	nopku		[X86] Disable Memory Protection Keys CPU feature found
-			in some Intel CPUs.
-
-	<module>.async_probe [KNL]
-			Enable asynchronous probe on this module.
-
 	early_ioremap_debug [KNL]
 			Enable debug messages in early_ioremap support. This
 			is useful for tracking down temporary early mappings
@@ -1110,10 +1191,10 @@
 			specified, the serial port must already be setup and
 			configured.
 
-		uart[8250],io,<addr>[,options]
-		uart[8250],mmio,<addr>[,options]
-		uart[8250],mmio32,<addr>[,options]
-		uart[8250],mmio32be,<addr>[,options]
+		uart[8250],io,<addr>[,options[,uartclk]]
+		uart[8250],mmio,<addr>[,options[,uartclk]]
+		uart[8250],mmio32,<addr>[,options[,uartclk]]
+		uart[8250],mmio32be,<addr>[,options[,uartclk]]
 		uart[8250],0x<addr>[,options]
 			Start an early, polled-mode console on the 8250/16550
 			UART at the specified I/O port or MMIO address.
@@ -1122,7 +1203,9 @@
 			If none of [io|mmio|mmio32|mmio32be], <addr> is assumed
 			to be equivalent to 'mmio'. 'options' are specified
 			in the same format described for "console=ttyS<n>"; if
-			unspecified, the h/w is not initialized.
+			unspecified, the h/w is not initialized. 'uartclk' is
+			the uart clock frequency; if unspecified, it is set
+			to 'BASE_BAUD' * 16.
 
 		pl011,<addr>
 		pl011,mmio32,<addr>
@@ -1248,7 +1331,7 @@
 			Append ",keep" to not disable it when the real console
 			takes over.
 
-			Only one of vga, efi, serial, or usb debug port can
+			Only one of vga, serial, or usb debug port can
 			be used at a time.
 
 			Currently only ttyS0 and ttyS1 may be specified by
@@ -1263,7 +1346,7 @@
 			Interaction with the standard serial driver is not
 			very good.
 
-			The VGA and EFI output is eventually overwritten by
+			The VGA output is eventually overwritten by
 			the real console.
 
 			The xen option can only be used in Xen domains.
@@ -1282,17 +1365,6 @@
 			force: enforce the use of EDAC to report H/W event.
 			default: on.
 
-	ekgdboc=	[X86,KGDB] Allow early kernel console debugging
-			ekgdboc=kbd
-
-			This is designed to be used in conjunction with
-			the boot argument: earlyprintk=vga
-
-			This parameter works in place of the kgdboc parameter
-			but can only be used if the backing tty is available
-			very early in the boot process. For early debugging
-			via a serial port see kgdboc_earlycon instead.
-
 	edd=		[EDD]
 			Format: {"off" | "on" | "skip[mbr]"}
 
@@ -1354,6 +1426,17 @@
 	eisa_irq_edge=	[PARISC,HW]
 			See header of drivers/parisc/eisa.c.
 
+	ekgdboc=	[X86,KGDB] Allow early kernel console debugging
+			Format: ekgdboc=kbd
+
+			This is designed to be used in conjunction with
+			the boot argument: earlyprintk=vga
+
+			This parameter works in place of the kgdboc parameter
+			but can only be used if the backing tty is available
+			very early in the boot process. For early debugging
+			via a serial port see kgdboc_earlycon instead.
+
 	elanfreq=	[X86-32]
 			See comment before function elanfreq_setup() in
 			arch/x86/kernel/cpu/cpufreq/elanfreq.c.
@@ -1375,7 +1458,7 @@
 			(in particular on some ATI chipsets).
 			The kernel tries to set a reasonable default.
 
-	enforcing	[SELINUX] Set initial enforcing status.
+	enforcing=	[SELINUX] Set initial enforcing status.
 			Format: {"0" | "1"}
 			See security/selinux/Kconfig help text.
 			0 -- permissive (log only, no denials).
@@ -1397,6 +1480,14 @@
 			Permit 'security.evm' to be updated regardless of
 			current integrity status.
 
+	early_page_ext [KNL] Enforces page_ext initialization to earlier
+			stages so cover more early boot allocations.
+			Please note that as side effect some optimizations
+			might be disabled to achieve that (e.g. parallelized
+			memory initialization is disabled) so the boot process
+			might take longer, especially on systems with a lot of
+			memory. Available with CONFIG_PAGE_EXTENSION=y.
+
 	failslab=
 	fail_usercopy=
 	fail_page_alloc=
@@ -1431,6 +1522,23 @@
 			as early as possible in order to facilitate early
 			boot debugging.
 
+	ftrace_boot_snapshot
+			[FTRACE] On boot up, a snapshot will be taken of the
+			ftrace ring buffer that can be read at:
+			/sys/kernel/tracing/snapshot.
+			This is useful if you need tracing information from kernel
+			boot up that is likely to be overridden by user space
+			start up functionality.
+
+			Optionally, the snapshot can also be defined for a tracing
+			instance that was created by the trace_instance= command
+			line parameter.
+
+			trace_instance=foo,sched_switch ftrace_boot_snapshot=foo
+
+			The above will cause the "foo" tracing instance to trigger
+			a snapshot at the end of boot up.
+
 	ftrace_dump_on_oops[=orig_cpu]
 			[FTRACE] will dump the trace buffers on oops.
 			If no parameter is passed, ftrace will dump
@@ -1493,6 +1601,20 @@
 			dependencies. This only applies for fw_devlink=on|rpm.
 			Format: <bool>
 
+	fw_devlink.sync_state =
+			[KNL] When all devices that could probe have finished
+			probing, this parameter controls what to do with
+			devices that haven't yet received their sync_state()
+			calls.
+			Format: { strict | timeout }
+			strict -- Default. Continue waiting on consumers to
+				probe successfully.
+			timeout -- Give up waiting on consumers and call
+				sync_state() on any devices that haven't yet
+				received their sync_state() calls after
+				deferred_probe_timeout has expired or by
+				late_initcall() if !CONFIG_MODULES.
+
 	gamecon.map[2|3]=
 			[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
 			support via parallel port (up to 5 devices per port)
@@ -1544,6 +1666,17 @@
 			Format: <unsigned int> such that (rxsize & ~0x1fffc0) == 0.
 			Default: 1024
 
+	hardened_usercopy=
+			[KNL] Under CONFIG_HARDENED_USERCOPY, whether
+			hardening is enabled for this boot. Hardened
+			usercopy checking is used to protect the kernel
+			from reading or writing beyond known memory
+			allocation boundaries as a proactive defense
+			against bounds-checking flaws in the kernel's
+			copy_to_user()/copy_from_user() interface.
+		on	Perform hardened usercopy checks (default).
+		off	Disable hardened usercopy checks.
+
 	hardlockup_all_cpu_backtrace=
 			[KNL] Should the hard-lockup detector generate
 			backtraces on all cpus.
@@ -1564,6 +1697,15 @@
 			corresponding firmware-first mode error processing
 			logic will be disabled.
 
+	hibernate=	[HIBERNATION]
+		noresume	Don't check if there's a hibernation image
+				present during boot.
+		nocompress	Don't compress/decompress hibernation images.
+		no		Disable hibernation and resume.
+		protect_image	Turn on image protection during restoration
+				(that will set all pages holding image data
+				during restoration read-only).
+
 	highmem=nn[KMG]	[KNL,BOOT] forces the highmem zone to have an exact
 			size of <nn>. This works even on boxes that have no
 			highmem otherwise. This also works to reduce highmem
@@ -1575,6 +1717,19 @@
 
 	hlt		[BUGS=ARM,SH]
 
+	hostname=	[KNL] Set the hostname (aka UTS nodename).
+			Format: <string>
+			This allows setting the system's hostname during early
+			startup. This sets the name returned by gethostname.
+			Using this parameter to set the hostname makes it
+			possible to ensure the hostname is correctly set before
+			any userspace processes run, avoiding the possibility
+			that a process may call gethostname before the hostname
+			has been explicitly set, resulting in the calling
+			process getting an incorrect result. The string must
+			not exceed the maximum allowed hostname length (usually
+			64 characters) and will be truncated otherwise.
+
 	hpet=		[X86-32,HPET] option to control HPET usage
 			Format: { enable (default) | disable | force |
 				verbose }
@@ -1586,16 +1741,6 @@
 	hpet_mmap=	[X86, HPET_MMAP] Allow userspace to mmap HPET
 			registers.  Default set by CONFIG_HPET_MMAP_DEFAULT.
 
-	hugetlb_cma=	[HW,CMA] The size of a CMA area used for allocation
-			of gigantic hugepages. Or using node format, the size
-			of a CMA area per node can be specified.
-			Format: nn[KMGTPE] or (node format)
-				<node>:nn[KMGTPE][,<node>:nn[KMGTPE]]
-
-			Reserve a CMA area of given size and allocate gigantic
-			hugepages using the CMA allocator. If enabled, the
-			boot-time allocation of gigantic hugepages is skipped.
-
 	hugepages=	[HW] Number of HugeTLB pages to allocate at boot.
 			If this follows hugepagesz (below), it specifies
 			the number of pages of hugepagesz to be allocated.
@@ -1617,22 +1762,35 @@
 			Documentation/admin-guide/mm/hugetlbpage.rst.
 			Format: size[KMG]
 
+	hugetlb_cma=	[HW,CMA] The size of a CMA area used for allocation
+			of gigantic hugepages. Or using node format, the size
+			of a CMA area per node can be specified.
+			Format: nn[KMGTPE] or (node format)
+				<node>:nn[KMGTPE][,<node>:nn[KMGTPE]]
+
+			Reserve a CMA area of given size and allocate gigantic
+			hugepages using the CMA allocator. If enabled, the
+			boot-time allocation of gigantic hugepages is skipped.
+
 	hugetlb_free_vmemmap=
-			[KNL] Reguires CONFIG_HUGETLB_PAGE_FREE_VMEMMAP
+			[KNL] Requires CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
 			enabled.
+			Control if HugeTLB Vmemmap Optimization (HVO) is enabled.
 			Allows heavy hugetlb users to free up some more
-			memory (6 * PAGE_SIZE for each 2MB hugetlb page).
+			memory (7 * PAGE_SIZE for each 2MB hugetlb page).
 			Format: { on | off (default) }
 
-			on:  enable the feature
-			off: disable the feature
+			on: enable HVO
+			off: disable HVO
 
-			Built with CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON=y,
+			Built with CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON=y,
 			the default is on.
 
-			This is not compatible with memory_hotplug.memmap_on_memory.
-			If both parameters are enabled, hugetlb_free_vmemmap takes
-			precedence over memory_hotplug.memmap_on_memory.
+			Note that the vmemmap pages may be allocated from the added
+			memory block itself when memory_hotplug.memmap_on_memory is
+			enabled, those vmemmap pages cannot be optimized even if this
+			feature is enabled.  Other vmemmap pages not allocated from
+			the added memory block itself do not be affected.
 
 	hung_task_panic=
 			[KNL] Should the hung task detector generate panics.
@@ -1654,12 +1812,6 @@
 				      which allow the hypervisor to 'idle' the
 				      guest on lock contention.
 
-	keep_bootcon	[KNL]
-			Do not unregister boot console at start. This is only
-			useful for debugging when something happens in the window
-			between unregistering the boot console and initializing
-			the real console.
-
 	i2c_bus=	[HW]	Override the default board specific I2C bus speed
 				or register an additional I2C bus that is not
 				registered from board initialization code.
@@ -1694,20 +1846,11 @@
 			architectures force reset to be always executed
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 	i8042.kbdreset	[HW] Reset device connected to KBD port
+	i8042.probe_defer
+			[HW] Allow deferred probing upon i8042 probe errors
 
 	i810=		[HW,DRM]
 
-	i8k.ignore_dmi	[HW] Continue probing hardware even if DMI data
-			indicates that the driver is running on unsupported
-			hardware.
-	i8k.force	[HW] Activate i8k driver even if SMM BIOS signature
-			does not match list of supported models.
-	i8k.power_status
-			[HW] Report power status in /proc/i8k
-			(disabled by default)
-	i8k.restricted	[HW] Allow controlling fans only if SYS_ADMIN
-			capability is set.
-
 	i915.invert_brightness=
 			[DRM] Invert the sense of the variable that is used to
 			set the brightness of the panel backlight. Normally a
@@ -1725,26 +1868,6 @@
 	icn=		[HW,ISDN]
 			Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
 
-	ide-core.nodma=	[HW] (E)IDE subsystem
-			Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
-			.vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr
-			.cdrom .chs .ignore_cable are additional options
-			See Documentation/ide/ide.rst.
-
-	ide-generic.probe-mask= [HW] (E)IDE subsystem
-			Format: <int>
-			Probe mask for legacy ISA IDE ports.  Depending on
-			platform up to 6 ports are supported, enabled by
-			setting corresponding bits in the mask to 1.  The
-			default value is 0x0, which has a special meaning.
-			On systems that have PCI, it triggers scanning the
-			PCI bus for the first and the second port, which
-			are then probed.  On systems without PCI the value
-			of 0x0 enables probing the two first ports as if it
-			was 0x3.
-
-	ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
-			Claim all unknown PCI IDE storage controllers.
 
 	idle=		[X86]
 			Format: idle=poll, idle=halt, idle=nomwait
@@ -1870,7 +1993,8 @@
 
 	ima_template=	[IMA]
 			Select one of defined IMA measurements template formats.
-			Formats: { "ima" | "ima-ng" | "ima-sig" }
+			Formats: { "ima" | "ima-ng" | "ima-ngv2" | "ima-sig" |
+				   "ima-sigv2" }
 			Default: "ima-ng"
 
 	ima_template_fmt=
@@ -2202,39 +2326,73 @@
 
 	ivrs_ioapic	[HW,X86-64]
 			Provide an override to the IOAPIC-ID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map IOAPIC-ID decimal 10 to
-			PCI device 00:14.0 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+
+			For example, to map IOAPIC-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_ioapic=10@0001:00:14.0
+
+			Deprecated formats:
+			* To map IOAPIC-ID decimal 10 to PCI device 00:14.0
+			  write the parameter as:
 				ivrs_ioapic[10]=00:14.0
+			* To map IOAPIC-ID decimal 10 to PCI segment 0x1 and
+			  PCI device 00:14.0 write the parameter as:
+				ivrs_ioapic[10]=0001:00:14.0
 
 	ivrs_hpet	[HW,X86-64]
 			Provide an override to the HPET-ID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map HPET-ID decimal 0 to
-			PCI device 00:14.0 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+
+			For example, to map HPET-ID decimal 10 to
+			PCI segment 0x1 and PCI device 00:14.0,
+			write the parameter as:
+				ivrs_hpet=10@0001:00:14.0
+
+			Deprecated formats:
+			* To map HPET-ID decimal 0 to PCI device 00:14.0
+			  write the parameter as:
 				ivrs_hpet[0]=00:14.0
+			* To map HPET-ID decimal 10 to PCI segment 0x1 and
+			  PCI device 00:14.0 write the parameter as:
+				ivrs_ioapic[10]=0001:00:14.0
 
 	ivrs_acpihid	[HW,X86-64]
 			Provide an override to the ACPI-HID:UID<->DEVICE-ID
-			mapping provided in the IVRS ACPI table. For
-			example, to map UART-HID:UID AMD0020:0 to
-			PCI device 00:14.5 write the parameter as:
+			mapping provided in the IVRS ACPI table.
+			By default, PCI segment is 0, and can be omitted.
+
+			For example, to map UART-HID:UID AMD0020:0 to
+			PCI segment 0x1 and PCI device ID 00:14.5,
+			write the parameter as:
+				ivrs_acpihid=AMD0020:0@0001:00:14.5
+
+			Deprecated formats:
+			* To map UART-HID:UID AMD0020:0 to PCI segment is 0,
+			  PCI device ID 00:14.5, write the parameter as:
 				ivrs_acpihid[00:14.5]=AMD0020:0
+			* To map UART-HID:UID AMD0020:0 to PCI segment 0x1 and
+			  PCI device ID 00:14.5, write the parameter as:
+				ivrs_acpihid[0001:00:14.5]=AMD0020:0
 
 	js=		[HW,JOY] Analog joystick
 			See Documentation/input/joydev/joystick.rst.
 
-	nokaslr		[KNL]
-			When CONFIG_RANDOMIZE_BASE is set, this disables
-			kernel and module base offset ASLR (Address Space
-			Layout Randomization).
-
 	kasan_multi_shot
 			[KNL] Enforce KASAN (Kernel Address Sanitizer) to print
 			report on every invalid memory access. Without this
 			parameter KASAN will print report only for the first
 			invalid access.
 
+	keep_bootcon	[KNL]
+			Do not unregister boot console at start. This is only
+			useful for debugging when something happens in the window
+			between unregistering the boot console and initializing
+			the real console.
+
 	keepinitrd	[HW,ARM]
 
 	kernelcore=	[KNL,X86,IA-64,PPC]
@@ -2330,16 +2488,43 @@
 			0: force disabled
 			1: force enabled
 
+	kunit.enable=	[KUNIT] Enable executing KUnit tests. Requires
+			CONFIG_KUNIT to be set to be fully enabled. The
+			default value can be overridden via
+			KUNIT_DEFAULT_ENABLED.
+			Default is 1 (enabled)
+
 	kvm.ignore_msrs=[KVM] Ignore guest accesses to unhandled MSRs.
 			Default is 0 (don't ignore, but inject #GP)
 
+	kvm.eager_page_split=
+			[KVM,X86] Controls whether or not KVM will try to
+			proactively split all huge pages during dirty logging.
+			Eager page splitting reduces interruptions to vCPU
+			execution by eliminating the write-protection faults
+			and MMU lock contention that would otherwise be
+			required to split huge pages lazily.
+
+			VM workloads that rarely perform writes or that write
+			only to a small region of VM memory may benefit from
+			disabling eager page splitting to allow huge pages to
+			still be used for reads.
+
+			The behavior of eager page splitting depends on whether
+			KVM_DIRTY_LOG_INITIALLY_SET is enabled or disabled. If
+			disabled, all huge pages in a memslot will be eagerly
+			split when dirty logging is enabled on that memslot. If
+			enabled, eager page splitting will be performed during
+			the KVM_CLEAR_DIRTY ioctl, and only for the pages being
+			cleared.
+
+			Eager page splitting is only supported when kvm.tdp_mmu=Y.
+
+			Default is Y (on).
+
 	kvm.enable_vmware_backdoor=[KVM] Support VMware backdoor PV interface.
 				   Default is false (don't support).
 
-	kvm.mmu_audit=	[KVM] This is a R/W parameter which allows audit
-			KVM MMU at runtime.
-			Default is 0 (off)
-
 	kvm.nx_huge_pages=
 			[KVM] Controls the software workaround for the
 			X86_BUG_ITLB_MULTIHIT bug.
@@ -2357,7 +2542,14 @@
 			[KVM] Controls how many 4KiB pages are periodically zapped
 			back to huge pages.  0 disables the recovery, otherwise if
 			the value is N KVM will zap 1/Nth of the 4KiB pages every
-			minute.  The default is 60.
+			period (see below).  The default is 60.
+
+	kvm.nx_huge_pages_recovery_period_ms=
+			[KVM] Controls the time period at which KVM zaps 4KiB pages
+			back to huge pages. If the value is a non-zero N, KVM will
+			zap a portion (see ratio above) of the pages every N msecs.
+			If the value is 0 (the default), KVM will pick a period based
+			on the ratio, such that a page is zapped after 1 hour on average.
 
 	kvm-amd.nested=	[KVM,AMD] Allow nested virtualization in KVM/SVM.
 			Default is 1 (enabled)
@@ -2369,14 +2561,22 @@
 	kvm-arm.mode=
 			[KVM,ARM] Select one of KVM/arm64's modes of operation.
 
+			none: Forcefully disable KVM.
+
 			nvhe: Standard nVHE-based mode, without support for
 			      protected guests.
 
 			protected: nVHE-based mode with support for guests whose
 				   state is kept private from the host.
-				   Not valid if the kernel is running in EL2.
 
-			Defaults to VHE/nVHE based on hardware support.
+			nested: VHE-based mode with support for nested
+				virtualization. Requires at least ARMv8.3
+				hardware.
+
+			Defaults to VHE/nVHE based on hardware support. Setting
+			mode to "protected" will disable kexec and hibernation
+			for the host. "nested" is experimental and should be
+			used with extreme caution.
 
 	kvm-arm.vgic_v3_group0_trap=
 			[KVM,ARM] Trap guest accesses to GICv3 group-0
@@ -2407,8 +2607,12 @@
 			Default is 1 (enabled)
 
 	kvm-intel.emulate_invalid_guest_state=
-			[KVM,Intel] Enable emulation of invalid guest states
-			Default is 0 (disabled)
+			[KVM,Intel] Disable emulation of invalid guest state.
+			Ignored if kvm-intel.enable_unrestricted_guest=1, as
+			guest state is never invalid for unrestricted guests.
+			This param doesn't apply to nested guests (L2), as KVM
+			never emulates invalid L2 guest state.
+			Default is 1 (enabled)
 
 	kvm-intel.flexpriority=
 			[KVM,Intel] Disable FlexPriority feature (TPR shadow).
@@ -2552,14 +2756,14 @@
 			when set.
 			Format: <int>
 
-	libata.force=	[LIBATA] Force configurations.  The format is comma-
-			separated list of "[ID:]VAL" where ID is
-			PORT[.DEVICE].  PORT and DEVICE are decimal numbers
-			matching port, link or device.  Basically, it matches
-			the ATA ID string printed on console by libata.  If
-			the whole ID part is omitted, the last PORT and DEVICE
-			values are used.  If ID hasn't been specified yet, the
-			configuration applies to all ports, links and devices.
+	libata.force=	[LIBATA] Force configurations.  The format is a comma-
+			separated list of "[ID:]VAL" where ID is PORT[.DEVICE].
+			PORT and DEVICE are decimal numbers matching port, link
+			or device.  Basically, it matches the ATA ID string
+			printed on console by libata.  If the whole ID part is
+			omitted, the last PORT and DEVICE values are used.  If
+			ID hasn't been specified yet, the configuration applies
+			to all ports, links and devices.
 
 			If only DEVICE is omitted, the parameter applies to
 			the port and all links and devices behind it.  DEVICE
@@ -2569,7 +2773,7 @@
 			host link and device attached to it.
 
 			The VAL specifies the configuration to force.  As long
-			as there's no ambiguity shortcut notation is allowed.
+			as there is no ambiguity, shortcut notation is allowed.
 			For example, both 1.5 and 1.5G would work for 1.5Gbps.
 			The following configurations can be forced.
 
@@ -2582,27 +2786,67 @@
 			  udma[/][16,25,33,44,66,100,133] notation is also
 			  allowed.
 
+			* nohrst, nosrst, norst: suppress hard, soft and both
+			  resets.
+
+			* rstonce: only attempt one reset during hot-unplug
+			  link recovery.
+
+			* [no]dbdelay: Enable or disable the extra 200ms delay
+			  before debouncing a link PHY and device presence
+			  detection.
+
 			* [no]ncq: Turn on or off NCQ.
 
-			* [no]ncqtrim: Turn off queued DSM TRIM.
+			* [no]ncqtrim: Enable or disable queued DSM TRIM.
+
+			* [no]ncqati: Enable or disable NCQ trim on ATI chipset.
+
+			* [no]trim: Enable or disable (unqueued) TRIM.
+
+			* trim_zero: Indicate that TRIM command zeroes data.
+
+			* max_trim_128m: Set 128M maximum trim size limit.
+
+			* [no]dma: Turn on or off DMA transfers.
+
+			* atapi_dmadir: Enable ATAPI DMADIR bridge support.
+
+			* atapi_mod16_dma: Enable the use of ATAPI DMA for
+			  commands that are not a multiple of 16 bytes.
+
+			* [no]dmalog: Enable or disable the use of the
+			  READ LOG DMA EXT command to access logs.
+
+			* [no]iddevlog: Enable or disable access to the
+			  identify device data log.
+
+			* [no]logdir: Enable or disable access to the general
+			  purpose log directory.
+
+			* max_sec_128: Set transfer size limit to 128 sectors.
+
+			* max_sec_1024: Set or clear transfer size limit to
+			  1024 sectors.
+
+			* max_sec_lba48: Set or clear transfer size limit to
+			  65535 sectors.
 
-			* nohrst, nosrst, norst: suppress hard, soft
-			  and both resets.
+			* [no]lpm: Enable or disable link power management.
 
-			* rstonce: only attempt one reset during
-			  hot-unplug link recovery
+			* [no]setxfer: Indicate if transfer speed mode setting
+			  should be skipped.
 
-			* dump_id: dump IDENTIFY data.
+			* [no]fua: Disable or enable FUA (Force Unit Access)
+			  support for devices supporting this feature.
 
-			* atapi_dmadir: Enable ATAPI DMADIR bridge support
+			* dump_id: Dump IDENTIFY data.
 
 			* disable: Disable this device.
 
 			If there are multiple matching configurations changing
 			the same attribute, the last one is used.
 
-	memblock=debug	[KNL] Enable memblock debug messages.
-
 	load_ramdisk=	[RAM] [Deprecated]
 
 	lockd.nlm_grace_period=P  [NFS] Assign grace period.
@@ -2744,7 +2988,7 @@
 			different yeeloong laptops.
 			Example: machtype=lemote-yeeloong-2f-7inch
 
-	max_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory greater
+	max_addr=nn[KMG]	[KNL,BOOT,IA-64] All physical memory greater
 			than or equal to this physical address is ignored.
 
 	maxcpus=	[SMP] Maximum number of processors that	an SMP kernel
@@ -2765,7 +3009,7 @@
 
 	mce		[X86-32] Machine Check Exception
 
-	mce=option	[X86-64] See Documentation/x86/x86_64/boot-options.rst
+	mce=option	[X86-64] See Documentation/arch/x86/x86_64/boot-options.rst
 
 	md=		[HW] RAID subsystems devices and level
 			See Documentation/admin-guide/md.rst.
@@ -2806,6 +3050,9 @@
 
 			For details see: Documentation/admin-guide/hw-vuln/mds.rst
 
+	mem=nn[KMG]	[HEXAGON] Set the memory size.
+			Must be specified, otherwise memory size will be 0.
+
 	mem=nn[KMG]	[KNL,BOOT] Force usage of a specific amount of memory
 			Amount of memory to be used in cases as follows:
 
@@ -2813,6 +3060,13 @@
 			2 when the kernel is not able to see the whole system memory;
 			3 memory that lies after 'mem=' boundary is excluded from
 			 the hypervisor, then assigned to KVM guests.
+			4 to limit the memory available for kdump kernel.
+
+			[ARC,MICROBLAZE] - the limit applies only to low memory,
+			high memory is not affected.
+
+			[ARM64] - only limits memory covered by the linear
+			mapping. The NOMAP regions are not affected.
 
 			[X86] Work as limiting max address. Use together
 			with memmap= to avoid physical address space collisions.
@@ -2823,9 +3077,19 @@
 			in above case 3, memory may need be hot added after boot
 			if system memory of hypervisor is not sufficient.
 
+	mem=nn[KMG]@ss[KMG]
+			[ARM,MIPS] - override the memory layout reported by
+			firmware.
+			Define a memory region of size nn[KMG] starting at
+			ss[KMG].
+			Multiple different regions can be specified with
+			multiple mem= parameters on the command line.
+
 	mem=nopentium	[BUGS=X86-32] Disable usage of 4MB pages for kernel
 			memory.
 
+	memblock=debug	[KNL] Enable memblock debug messages.
+
 	memchunk=nn[KMG]
 			[KNL,SH] Allow user to override the default size for
 			per-device physically contiguous DMA buffers.
@@ -2911,10 +3175,12 @@
 			[KNL,X86,ARM] Boolean flag to enable this feature.
 			Format: {on | off (default)}
 			When enabled, runtime hotplugged memory will
-			allocate its internal metadata (struct pages)
-			from the hotadded memory which will allow to
-			hotadd a lot of memory without requiring
-			additional memory to do so.
+			allocate its internal metadata (struct pages,
+			those vmemmap pages cannot be optimized even
+			if hugetlb_free_vmemmap is enabled) from the
+			hotadded memory which will allow to hotadd a
+			lot of memory without requiring additional
+			memory to do so.
 			This feature is disabled by default because it
 			has some implication on large (e.g. GB)
 			allocations in some configurations (e.g. small
@@ -2924,11 +3190,7 @@
 			Note that even when enabled, there are a few cases where
 			the feature is not effective.
 
-			This is not compatible with hugetlb_free_vmemmap. If
-			both parameters are enabled, hugetlb_free_vmemmap takes
-			precedence over memory_hotplug.memmap_on_memory.
-
-	memtest=	[KNL,X86,ARM,PPC,RISCV] Enable memtest
+	memtest=	[KNL,X86,ARM,M68K,PPC,RISCV] Enable memtest
 			Format: <integer>
 			default : 0 <disable>
 			Specifies the number of memtest passes to be
@@ -2946,7 +3208,7 @@
 			mem_encrypt=on:		Activate SME
 			mem_encrypt=off:	Do not activate SME
 
-			Refer to Documentation/virt/kvm/amd-memory-encryption.rst
+			Refer to Documentation/virt/kvm/x86/amd-memory-encryption.rst
 			for details on when memory encryption can be activated.
 
 	mem_sleep_default=	[SUSPEND] Default system suspend mode:
@@ -2955,9 +3217,6 @@
 			deep    - Suspend-To-RAM or equivalent (if supported)
 			See Documentation/admin-guide/pm/sleep-states.rst.
 
-	meye.*=		[HW] Set MotionEye Camera parameters
-			See Documentation/admin-guide/media/meye.rst.
-
 	mfgpt_irq=	[IA-32] Specify the IRQ to use for the
 			Multi-Function General Purpose Timers on AMD Geode
 			platforms.
@@ -2969,7 +3228,7 @@
 
 	mga=		[HW,DRM]
 
-	min_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory below this
+	min_addr=nn[KMG]	[KNL,BOOT,IA-64] All physical memory below this
 			physical address is ignored.
 
 	mini2440=	[ARM,HW,KNL]
@@ -3004,19 +3263,23 @@
 				improves system performance, but it may also
 				expose users to several CPU vulnerabilities.
 				Equivalent to: nopti [X86,PPC]
-					       kpti=0 [ARM64]
+					       if nokaslr then kpti=0 [ARM64]
 					       nospectre_v1 [X86,PPC]
 					       nobp=0 [S390]
 					       nospectre_v2 [X86,PPC,S390,ARM64]
 					       spectre_v2_user=off [X86]
 					       spec_store_bypass_disable=off [X86,PPC]
 					       ssbd=force-off [ARM64]
+					       nospectre_bhb [ARM64]
 					       l1tf=off [X86]
 					       mds=off [X86]
 					       tsx_async_abort=off [X86]
 					       kvm.nx_huge_pages=off [X86]
+					       srbds=off [X86,INTEL]
 					       no_entry_flush [PPC]
 					       no_uaccess_flush [PPC]
+					       mmio_stale_data=off [X86]
+					       retbleed=off [X86]
 
 				Exceptions:
 					       This does not have any effect on
@@ -3038,6 +3301,8 @@
 				Equivalent to: l1tf=flush,nosmt [X86]
 					       mds=full,nosmt [X86]
 					       tsx_async_abort=full,nosmt [X86]
+					       mmio_stale_data=full,nosmt [X86]
+					       retbleed=auto,nosmt [X86]
 
 	mminit_loglevel=
 			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
@@ -3047,6 +3312,62 @@
 			log everything. Information is printed at KERN_DEBUG
 			so loglevel=8 may also need to be specified.
 
+	mmio_stale_data=
+			[X86,INTEL] Control mitigation for the Processor
+			MMIO Stale Data vulnerabilities.
+
+			Processor MMIO Stale Data is a class of
+			vulnerabilities that may expose data after an MMIO
+			operation. Exposed data could originate or end in
+			the same CPU buffers as affected by MDS and TAA.
+			Therefore, similar to MDS and TAA, the mitigation
+			is to clear the affected CPU buffers.
+
+			This parameter controls the mitigation. The
+			options are:
+
+			full       - Enable mitigation on vulnerable CPUs
+
+			full,nosmt - Enable mitigation and disable SMT on
+				     vulnerable CPUs.
+
+			off        - Unconditionally disable mitigation
+
+			On MDS or TAA affected machines,
+			mmio_stale_data=off can be prevented by an active
+			MDS or TAA mitigation as these vulnerabilities are
+			mitigated with the same mechanism so in order to
+			disable this mitigation, you need to specify
+			mds=off and tsx_async_abort=off too.
+
+			Not specifying this option is equivalent to
+			mmio_stale_data=full.
+
+			For details see:
+			Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
+
+	<module>.async_probe[=<bool>] [KNL]
+			If no <bool> value is specified or if the value
+			specified is not a valid <bool>, enable asynchronous
+			probe on this module.  Otherwise, enable/disable
+			asynchronous probe on this module as indicated by the
+			<bool> value. See also: module.async_probe
+
+	module.async_probe=<bool>
+			[KNL] When set to true, modules will use async probing
+			by default. To enable/disable async probing for a
+			specific module, use the module specific control that
+			is documented under <module>.async_probe. When both
+			module.async_probe and <module>.async_probe are
+			specified, <module>.async_probe takes precedence for
+			the specific module.
+
+	module.enable_dups_trace
+			[KNL] When CONFIG_MODULE_DEBUG_AUTOLOAD_DUPS is set,
+			this means that duplicate request_module() calls will
+			trigger a WARN_ON() instead of a pr_warn(). Note that
+			if MODULE_DEBUG_AUTOLOAD_DUPS_TRACE is set, WARN_ON()s
+			will always be issued and this option does nothing.
 	module.sig_enforce
 			[KNL] When CONFIG_MODULE_SIG is set, this means that
 			modules without (valid) signatures will fail to load.
@@ -3093,20 +3414,6 @@
 	mtdparts=	[MTD]
 			See drivers/mtd/parsers/cmdlinepart.c
 
-	multitce=off	[PPC]  This parameter disables the use of the pSeries
-			firmware feature for updating multiple TCE entries
-			at a time.
-
-	onenand.bdry=	[HW,MTD] Flex-OneNAND Boundary Configuration
-
-			Format: [die0_boundary][,die0_lock][,die1_boundary][,die1_lock]
-
-			boundary - index of last SLC block on Flex-OneNAND.
-				   The remaining blocks are configured as MLC blocks.
-			lock	 - Configure if Flex-OneNAND boundary should be locked.
-				   Once locked, the boundary cannot be changed.
-				   1 indicates lock status, 0 indicates unlock status.
-
 	mtdset=		[ARM]
 			ARM/S3C2412 JIVE boot control
 
@@ -3133,6 +3440,10 @@
 			Used for mtrr cleanup. It is spare mtrr entries number.
 			Set to 2 or more if your graphical card needs more.
 
+	multitce=off	[PPC]  This parameter disables the use of the pSeries
+			firmware feature for updating multiple TCE entries
+			at a time.
+
 	n2=		[NET] SDL Inc. RISCom/N2 synchronous serial card
 
 	netdev=		[NET] Network devices parameters
@@ -3142,20 +3453,24 @@
 			This usage is only documented in each driver source
 			file if at all.
 
+	netpoll.carrier_timeout=
+			[NET] Specifies amount of time (in seconds) that
+			netpoll should wait for a carrier. By default netpoll
+			waits 4 seconds.
+
 	nf_conntrack.acct=
 			[NETFILTER] Enable connection tracking flow accounting
 			0 to disable accounting
 			1 to enable accounting
 			Default value is 0.
 
-	nfsaddrs=	[NFS] Deprecated.  Use ip= instead.
-			See Documentation/admin-guide/nfs/nfsroot.rst.
-
-	nfsroot=	[NFS] nfs root filesystem for disk-less boxes.
-			See Documentation/admin-guide/nfs/nfsroot.rst.
+	nfs.cache_getent=
+			[NFS] sets the pathname to the program which is used
+			to update the NFS client cache entries.
 
-	nfsrootdebug	[NFS] enable nfsroot debugging messages.
-			See Documentation/admin-guide/nfs/nfsroot.rst.
+	nfs.cache_getent_timeout=
+			[NFS] sets the timeout after which an attempt to
+			update a cache entry is deemed to have failed.
 
 	nfs.callback_nr_threads=
 			[NFSv4] set the total number of threads that the
@@ -3166,18 +3481,6 @@
 			[NFS] set the TCP port on which the NFSv4 callback
 			channel should listen.
 
-	nfs.cache_getent=
-			[NFS] sets the pathname to the program which is used
-			to update the NFS client cache entries.
-
-	nfs.cache_getent_timeout=
-			[NFS] sets the timeout after which an attempt to
-			update a cache entry is deemed to have failed.
-
-	nfs.idmap_cache_timeout=
-			[NFS] set the maximum lifetime for idmapper cache
-			entries.
-
 	nfs.enable_ino64=
 			[NFS] enable 64-bit inode numbers.
 			If zero, the NFS client will fake up a 32-bit inode
@@ -3185,6 +3488,10 @@
 			of returning the full 64-bit number.
 			The default is to return 64-bit inode numbers.
 
+	nfs.idmap_cache_timeout=
+			[NFS] set the maximum lifetime for idmapper cache
+			entries.
+
 	nfs.max_session_cb_slots=
 			[NFSv4.1] Sets the maximum number of session
 			slots the client will assign to the callback
@@ -3212,21 +3519,14 @@
 			will be autodetected by the client, and it will fall
 			back to using the idmapper.
 			To turn off this behaviour, set the value to '0'.
+
 	nfs.nfs4_unique_id=
 			[NFS4] Specify an additional fixed unique ident-
 			ification string that NFSv4 clients can insert into
 			their nfs_client_id4 string.  This is typically a
 			UUID that is generated at system install time.
 
-	nfs.send_implementation_id =
-			[NFSv4.1] Send client implementation identification
-			information in exchange_id requests.
-			If zero, no implementation identification information
-			will be sent.
-			The default is to send the implementation identification
-			information.
-
-	nfs.recover_lost_locks =
+	nfs.recover_lost_locks=
 			[NFSv4] Attempt to recover locks that were lost due
 			to a lease timeout on the server. Please note that
 			doing this risks data corruption, since there are
@@ -3238,7 +3538,15 @@
 			The default parameter value of '0' causes the kernel
 			not to attempt recovery of lost locks.
 
-	nfs4.layoutstats_timer =
+	nfs.send_implementation_id=
+			[NFSv4.1] Send client implementation identification
+			information in exchange_id requests.
+			If zero, no implementation identification information
+			will be sent.
+			The default is to send the implementation identification
+			information.
+
+	nfs4.layoutstats_timer=
 			[NFSv4.2] Change the rate at which the kernel sends
 			layoutstats to the pNFS metadata server.
 
@@ -3247,6 +3555,11 @@
 			driver. A non-zero value sets the minimum interval
 			in seconds between layoutstats transmissions.
 
+	nfsd.inter_copy_offload_enable=
+			[NFSv4.2] When set to 1, the server will support
+			server-to-server copies for which this server is
+			the destination of the copy.
+
 	nfsd.nfs4_disable_idmapping=
 			[NFSv4] When set to the default of '1', the NFSv4
 			server will return only numeric uids and gids to
@@ -3254,6 +3567,23 @@
 			and gids from such clients.  This is intended to ease
 			migration from NFSv2/v3.
 
+	nfsd.nfsd4_ssc_umount_timeout=
+			[NFSv4.2] When used as the destination of a
+			server-to-server copy, knfsd temporarily mounts
+			the source server.  It caches the mount in case
+			it will be needed again, and discards it if not
+			used for the number of milliseconds specified by
+			this parameter.
+
+	nfsaddrs=	[NFS] Deprecated.  Use ip= instead.
+			See Documentation/admin-guide/nfs/nfsroot.rst.
+
+	nfsroot=	[NFS] nfs root filesystem for disk-less boxes.
+			See Documentation/admin-guide/nfs/nfsroot.rst.
+
+	nfsrootdebug	[NFS] enable nfsroot debugging messages.
+			See Documentation/admin-guide/nfs/nfsroot.rst.
+
 	nmi_backtrace.backtrace_idle [KNL]
 			Dump stacks even of idle CPUs in response to an
 			NMI stack-backtrace request.
@@ -3278,45 +3608,15 @@
 			These settings can be accessed at runtime via
 			the nmi_watchdog and hardlockup_panic sysctls.
 
-	netpoll.carrier_timeout=
-			[NET] Specifies amount of time (in seconds) that
-			netpoll should wait for a carrier. By default netpoll
-			waits 4 seconds.
-
 	no387		[BUGS=X86-32] Tells the kernel to use the 387 maths
 			emulation library even if a 387 maths coprocessor
 			is present.
 
-	no5lvl		[X86-64] Disable 5-level paging mode. Forces
-			kernel to use 4-level paging instead.
-
-	nofsgsbase	[X86] Disables FSGSBASE instructions.
+	no4lvl		[RISCV] Disable 4-level and 5-level paging modes. Forces
+			kernel to use 3-level paging instead.
 
-	no_console_suspend
-			[HW] Never suspend the console
-			Disable suspending of consoles during suspend and
-			hibernate operations.  Once disabled, debugging
-			messages can reach various consoles while the rest
-			of the system is being put to sleep (ie, while
-			debugging driver suspend/resume hooks).  This may
-			not work reliably with all consoles, but is known
-			to work with serial and VGA consoles.
-			To facilitate more flexible debugging, we also add
-			console_suspend, a printk module parameter to control
-			it. Users could use console_suspend (usually
-			/sys/module/printk/parameters/console_suspend) to
-			turn on/off it dynamically.
-
-	novmcoredd	[KNL,KDUMP]
-			Disable device dump. Device dump allows drivers to
-			append dump data to vmcore so you can collect driver
-			specified debug info.  Drivers can append the data
-			without any limit and this data is stored in memory,
-			so this may cause significant memory stress.  Disabling
-			device dump can help save memory but the driver debug
-			data will be no longer available.  This parameter
-			is only available when CONFIG_PROC_VMCORE_DEVICE_DUMP
-			is set.
+	no5lvl		[X86-64,RISCV] Disable 5-level paging mode. Forces
+			kernel to use 4-level paging instead.
 
 	noaliencache	[MM, NUMA, SLAB] Disables the allocation of alien
 			caches in the slab allocator.  Saves per-node memory,
@@ -3332,14 +3632,25 @@
 
 	noautogroup	Disable scheduler automatic task group creation.
 
-	nobats		[PPC] Do not use BATs for mapping kernel lowmem
-			on "Classic" PPC cores.
-
 	nocache		[ARM]
 
-	noclflush	[BUGS=X86] Don't use the CLFLUSH instruction
+	no_console_suspend
+			[HW] Never suspend the console
+			Disable suspending of consoles during suspend and
+			hibernate operations.  Once disabled, debugging
+			messages can reach various consoles while the rest
+			of the system is being put to sleep (ie, while
+			debugging driver suspend/resume hooks).  This may
+			not work reliably with all consoles, but is known
+			to work with serial and VGA consoles.
+			To facilitate more flexible debugging, we also add
+			console_suspend, a printk module parameter to control
+			it. Users could use console_suspend (usually
+			/sys/module/printk/parameters/console_suspend) to
+			turn on/off it dynamically.
 
-	delayacct	[KNL] Enable per-task delay accounting
+	no_debug_objects
+			[KNL] Disable object debugging
 
 	nodsp		[SH] Disable hardware DSP at boot time.
 
@@ -3349,19 +3660,6 @@
 
 	noexec		[IA-64]
 
-	noexec		[X86]
-			On X86-32 available only on PAE configured kernels.
-			noexec=on: enable non-executable mappings (default)
-			noexec=off: disable non-executable mappings
-
-	nosmap		[X86,PPC]
-			Disable SMAP (Supervisor Mode Access Prevention)
-			even if it is supported by processor.
-
-	nosmep		[X86,PPC]
-			Disable SMEP (Supervisor Mode Execution Prevention)
-			even if it is supported by processor.
-
 	noexec32	[X86-64]
 			This affects only 32-bit executables.
 			noexec32=on: enable non-executable mappings (default)
@@ -3369,70 +3667,18 @@
 			noexec32=off: disable non-executable mappings
 				read implies executable mappings
 
+	no_file_caps	Tells the kernel not to honor file capabilities.  The
+			only way then for a file to be executed with privilege
+			is to be setuid root or executed by root.
+
 	nofpu		[MIPS,SH] Disable hardware FPU at boot time.
 
+	nofsgsbase	[X86] Disables FSGSBASE instructions.
+
 	nofxsr		[BUGS=X86-32] Disables x86 floating point extended
 			register save and restore. The kernel will only save
 			legacy floating-point registers on task switch.
 
-	nohugeiomap	[KNL,X86,PPC,ARM64] Disable kernel huge I/O mappings.
-
-	nohugevmalloc	[PPC] Disable kernel huge vmalloc mappings.
-
-	nosmt		[KNL,S390] Disable symmetric multithreading (SMT).
-			Equivalent to smt=1.
-
-			[KNL,X86] Disable symmetric multithreading (SMT).
-			nosmt=force: Force disable SMT, cannot be undone
-				     via the sysfs control file.
-
-	nospectre_v1	[X86,PPC] Disable mitigations for Spectre Variant 1
-			(bounds check bypass). With this option data leaks are
-			possible in the system.
-
-	nospectre_v2	[X86,PPC_FSL_BOOK3E,ARM64] Disable all mitigations for
-			the Spectre variant 2 (indirect branch prediction)
-			vulnerability. System may allow data leaks with this
-			option.
-
-	nospec_store_bypass_disable
-			[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
-
-	no_uaccess_flush
-	                [PPC] Don't flush the L1-D cache after accessing user data.
-
-	noxsave		[BUGS=X86] Disables x86 extended register state save
-			and restore using xsave. The kernel will fallback to
-			enabling legacy floating-point and sse state.
-
-	noxsaveopt	[X86] Disables xsaveopt used in saving x86 extended
-			register states. The kernel will fall back to use
-			xsave to save the states. By using this parameter,
-			performance of saving the states is degraded because
-			xsave doesn't support modified optimization while
-			xsaveopt supports it on xsaveopt enabled systems.
-
-	noxsaves	[X86] Disables xsaves and xrstors used in saving and
-			restoring x86 extended register state in compacted
-			form of xsave area. The kernel will fall back to use
-			xsaveopt and xrstor to save and restore the states
-			in standard form of xsave area. By using this
-			parameter, xsave area per process might occupy more
-			memory on xsaves enabled systems.
-
-	nohlt		[ARM,ARM64,MICROBLAZE,SH] Forces the kernel to busy wait
-			in do_idle() and not use the arch_cpu_idle()
-			implementation; requires CONFIG_GENERIC_IDLE_POLL_SETUP
-			to be effective. This is useful on platforms where the
-			sleep(SH) or wfi(ARM,ARM64) instructions do not work
-			correctly or when doing power measurements to evalute
-			the impact of the sleep instructions. This is also
-			useful when using JTAG debugger.
-
-	no_file_caps	Tells the kernel not to honor file capabilities.  The
-			only way then for a file to be executed with privilege
-			is to be setuid root or executed by root.
-
 	nohalt		[IA-64] Tells the kernel not to use the power saving
 			function PAL_HALT_LIGHT when idle. This increases
 			power-consumption. On the positive side, it reduces
@@ -3450,13 +3696,25 @@
 			difficult since unequal pointers can no longer be
 			compared.  However, if this command-line option is
 			specified, then all normal pointers will have their true
-			value printed.  Pointers printed via %pK may still be
-			hashed.  This option should only be specified when
+			value printed. This option should only be specified when
 			debugging the kernel.  Please do not use on production
 			kernels.
 
 	nohibernate	[HIBERNATION] Disable hibernation and resume.
 
+	nohlt		[ARM,ARM64,MICROBLAZE,SH] Forces the kernel to busy wait
+			in do_idle() and not use the arch_cpu_idle()
+			implementation; requires CONFIG_GENERIC_IDLE_POLL_SETUP
+			to be effective. This is useful on platforms where the
+			sleep(SH) or wfi(ARM,ARM64) instructions do not work
+			correctly or when doing power measurements to evaluate
+			the impact of the sleep instructions. This is also
+			useful when using JTAG debugger.
+
+	nohugeiomap	[KNL,X86,PPC,ARM64] Disable kernel huge I/O mappings.
+
+	nohugevmalloc	[KNL,X86,PPC,ARM64] Disable kernel huge vmalloc mappings.
+
 	nohz=		[KNL] Boottime enable/disable dynamic ticks
 			Valid arguments: on, off
 			Default: on
@@ -3471,15 +3729,8 @@
 			just as if they had also been called out in the
 			rcu_nocbs= boot parameter.
 
-	noiotrap	[SH] Disables trapped I/O port accesses.
-
-	noirqdebug	[X86-32] Disables the code which attempts to detect and
-			disable unhandled interrupt sources.
-
-	no_timer_check	[X86,APIC] Disables the code which tests for
-			broken timer IRQ sources.
-
-	noisapnp	[ISAPNP] Disables ISA PnP code.
+			Note that this argument takes precedence over
+			the CONFIG_RCU_NOCB_CPU_DEFAULT_ALL option.
 
 	noinitrd	[RAM] Tells the kernel not to load any configured
 			initial RAM disk.
@@ -3492,28 +3743,29 @@
 
 	noinvpcid	[X86] Disable the INVPCID cpu feature.
 
+	noiotrap	[SH] Disables trapped I/O port accesses.
+
+	noirqdebug	[X86-32] Disables the code which attempts to detect and
+			disable unhandled interrupt sources.
+
+	noisapnp	[ISAPNP] Disables ISA PnP code.
+
 	nojitter	[IA-64] Disables jitter checking for ITC timers.
 
-	no-kvmclock	[X86,KVM] Disable paravirtualized KVM clock driver
+	nokaslr		[KNL]
+			When CONFIG_RANDOMIZE_BASE is set, this disables
+			kernel and module base offset ASLR (Address Space
+			Layout Randomization).
 
 	no-kvmapf	[X86,KVM] Disable paravirtualized asynchronous page
 			fault handling.
 
-	no-vmw-sched-clock
-			[X86,PV_OPS] Disable paravirtualized VMware scheduler
-			clock and use the default one.
-
-	no-steal-acc	[X86,PV_OPS,ARM64] Disable paravirtualized steal time
-			accounting. steal time is computed, but won't
-			influence scheduler behaviour
+	no-kvmclock	[X86,KVM] Disable paravirtualized KVM clock driver
 
 	nolapic		[X86-32,APIC] Do not enable or use the local APIC.
 
 	nolapic_timer	[X86-32,APIC] Do not use the local APIC timer.
 
-	noltlbs		[PPC] Do not use large page/tlb entries for kernel
-			lowmem mapping on PPC40x and PPC8xx
-
 	nomca		[IA-64] Disable machine check abort handling
 
 	nomce		[X86-32] Disable Machine Check Exception
@@ -3521,48 +3773,123 @@
 	nomfgpt		[X86-32] Disable Multi-Function General Purpose
 			Timer usage (for AMD Geode machines).
 
+	nomodeset	Disable kernel modesetting. Most systems' firmware
+			sets up a display mode and provides framebuffer memory
+			for output. With nomodeset, DRM and fbdev drivers will
+			not load if they could possibly displace the pre-
+			initialized output. Only the system framebuffer will
+			be available for use. The respective drivers will not
+			perform display-mode changes or accelerated rendering.
+
+			Useful as error fallback, or for testing and debugging.
+
+	nomodule	Disable module load
+
 	nonmi_ipi	[X86] Disable using NMI IPIs during panic/reboot to
 			shutdown the other cpus.  Instead use the REBOOT_VECTOR
 			irq.
 
-	nomodule	Disable module load
-
 	nopat		[X86] Disable PAT (page attribute table extension of
 			pagetables) support.
 
 	nopcid		[X86-64] Disable the PCID cpu feature.
 
+	nopku		[X86] Disable Memory Protection Keys CPU feature found
+			in some Intel CPUs.
+
+	nopti		[X86-64]
+			Equivalent to pti=off
+
+	nopv=		[X86,XEN,KVM,HYPER_V,VMWARE]
+			Disables the PV optimizations forcing the guest to run
+			as generic guest with no PV drivers. Currently support
+			XEN HVM, KVM, HYPER_V and VMWARE guest.
+
+	nopvspin	[X86,XEN,KVM]
+			Disables the qspinlock slow path using PV optimizations
+			which allow the hypervisor to 'idle' the guest on lock
+			contention.
+
 	norandmaps	Don't use address space randomization.  Equivalent to
 			echo 0 > /proc/sys/kernel/randomize_va_space
 
 	noreplace-smp	[X86-32,SMP] Don't replace SMP instructions
 			with UP alternatives
 
-	nordrand	[X86] Disable kernel use of the RDRAND and
-			RDSEED instructions even if they are supported
-			by the processor.  RDRAND and RDSEED are still
-			available to user space applications.
-
 	noresume	[SWSUSP] Disables resume and restores original swap
 			space.
 
+	nosbagart	[IA-64]
+
 	no-scroll	[VGA] Disables scrollback.
 			This is required for the Braillex ib80-piezo Braille
 			reader made by F.H. Papenmeier (Germany).
 
-	nosbagart	[IA-64]
+	nosgx		[X86-64,SGX] Disables Intel SGX kernel support.
 
-	nosep		[BUGS=X86-32] Disables x86 SYSENTER/SYSEXIT support.
+	nosmap		[PPC]
+			Disable SMAP (Supervisor Mode Access Prevention)
+			even if it is supported by processor.
 
-	nosgx		[X86-64,SGX] Disables Intel SGX kernel support.
+	nosmep		[PPC64s]
+			Disable SMEP (Supervisor Mode Execution Prevention)
+			even if it is supported by processor.
 
 	nosmp		[SMP] Tells an SMP kernel to act as a UP kernel,
 			and disable the IO APIC.  legacy for "maxcpus=0".
 
+	nosmt		[KNL,S390] Disable symmetric multithreading (SMT).
+			Equivalent to smt=1.
+
+			[KNL,X86] Disable symmetric multithreading (SMT).
+			nosmt=force: Force disable SMT, cannot be undone
+				     via the sysfs control file.
+
 	nosoftlockup	[KNL] Disable the soft-lockup detector.
 
+	nospec_store_bypass_disable
+			[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
+
+	nospectre_bhb	[ARM64] Disable all mitigations for Spectre-BHB (branch
+			history injection) vulnerability. System may allow data leaks
+			with this option.
+
+	nospectre_v1	[X86,PPC] Disable mitigations for Spectre Variant 1
+			(bounds check bypass). With this option data leaks are
+			possible in the system.
+
+	nospectre_v2	[X86,PPC_E500,ARM64] Disable all mitigations for
+			the Spectre variant 2 (indirect branch prediction)
+			vulnerability. System may allow data leaks with this
+			option.
+
+	no-steal-acc	[X86,PV_OPS,ARM64,PPC/PSERIES] Disable paravirtualized
+			steal time accounting. steal time is computed, but
+			won't influence scheduler behaviour
+
 	nosync		[HW,M68K] Disables sync negotiation for all devices.
 
+	no_timer_check	[X86,APIC] Disables the code which tests for
+			broken timer IRQ sources.
+
+	no_uaccess_flush
+	                [PPC] Don't flush the L1-D cache after accessing user data.
+
+	novmcoredd	[KNL,KDUMP]
+			Disable device dump. Device dump allows drivers to
+			append dump data to vmcore so you can collect driver
+			specified debug info.  Drivers can append the data
+			without any limit and this data is stored in memory,
+			so this may cause significant memory stress.  Disabling
+			device dump can help save memory but the driver debug
+			data will be no longer available.  This parameter
+			is only available when CONFIG_PROC_VMCORE_DEVICE_DUMP
+			is set.
+
+	no-vmw-sched-clock
+			[X86,PV_OPS] Disable paravirtualized VMware scheduler
+			clock and use the default one.
+
 	nowatchdog	[KNL] Disable both lockup detectors, i.e.
 			soft-lockup and NMI watchdog (hard-lockup).
 
@@ -3570,19 +3897,28 @@
 
 	nox2apic	[X86-64,APIC] Do not enable x2APIC mode.
 
-	cpu0_hotplug	[X86] Turn on CPU0 hotplug feature when
-			CONFIG_BOOTPARAM_HOTPLUG_CPU0 is off.
-			Some features depend on CPU0. Known dependencies are:
-			1. Resume from suspend/hibernate depends on CPU0.
-			Suspend/hibernate will fail if CPU0 is offline and you
-			need to online CPU0 before suspend/hibernate.
-			2. PIC interrupts also depend on CPU0. CPU0 can't be
-			removed if a PIC interrupt is detected.
-			It's said poweroff/reboot may depend on CPU0 on some
-			machines although I haven't seen such issues so far
-			after CPU0 is offline on a few tested machines.
-			If the dependencies are under your control, you can
-			turn on cpu0_hotplug.
+			NOTE: this parameter will be ignored on systems with the
+			LEGACY_XAPIC_DISABLED bit set in the
+			IA32_XAPIC_DISABLE_STATUS MSR.
+
+	noxsave		[BUGS=X86] Disables x86 extended register state save
+			and restore using xsave. The kernel will fallback to
+			enabling legacy floating-point and sse state.
+
+	noxsaveopt	[X86] Disables xsaveopt used in saving x86 extended
+			register states. The kernel will fall back to use
+			xsave to save the states. By using this parameter,
+			performance of saving the states is degraded because
+			xsave doesn't support modified optimization while
+			xsaveopt supports it on xsaveopt enabled systems.
+
+	noxsaves	[X86] Disables xsaves and xrstors used in saving and
+			restoring x86 extended register state in compacted
+			form of xsave area. The kernel will fall back to use
+			xsaveopt and xrstor to save and restore the states
+			in standard form of xsave area. By using this
+			parameter, xsave area per process might occupy more
+			memory on xsaves enabled systems.
 
 	nps_mtm_hs_ctr=	[KNL,ARC]
 			This parameter sets the maximum duration, in
@@ -3636,6 +3972,16 @@
 			For example, to override I2C bus2:
 			omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
 
+	onenand.bdry=	[HW,MTD] Flex-OneNAND Boundary Configuration
+
+			Format: [die0_boundary][,die0_lock][,die1_boundary][,die1_lock]
+
+			boundary - index of last SLC block on Flex-OneNAND.
+				   The remaining blocks are configured as MLC blocks.
+			lock	 - Configure if Flex-OneNAND boundary should be locked.
+				   Once locked, the boundary cannot be changed.
+				   1 indicates lock status, 0 indicates unlock status.
+
 	oops=panic	Always panic on oopses. Default is to just kill the
 			process, but there is a small probability of
 			deadlocking the machine.
@@ -3668,7 +4014,7 @@
 			[KNL] Minimal page reporting order
 			Format: <integer>
 			Adjust the minimal page reporting order. The page
-			reporting is disabled when it exceeds (MAX_ORDER-1).
+			reporting is disabled when it exceeds MAX_ORDER.
 
 	panic=		[KNL] Kernel behaviour on panic: delay <timeout>
 			timeout > 0: seconds before rebooting
@@ -3684,6 +4030,11 @@
 			bit 3: print locks info if CONFIG_LOCKDEP is on
 			bit 4: print ftrace buffer
 			bit 5: print all printk messages in buffer
+			bit 6: print all CPUs backtrace (if available in the arch)
+			*Be aware* that this option may print a _lot_ of lines,
+			so there are risks of losing older messages in the log.
+			Use this option carefully, maybe worth to setup a
+			bigger log buffer with "log_buf_len" along with this.
 
 	panic_on_taint=	Bitmask for conditionally calling panic() in add_taint()
 			Format: <hex>[,nousertaint]
@@ -3701,14 +4052,6 @@
 	panic_on_warn	panic() instead of WARN().  Useful to cause kdump
 			on a WARN().
 
-	crash_kexec_post_notifiers
-			Run kdump after running panic-notifiers and dumping
-			kmsg. This only for the users who doubt kdump always
-			succeeds in any situation.
-			Note that this also increases risks of kdump failure,
-			because some panic notifiers can make the crashed
-			kernel more unstable.
-
 	parkbd.port=	[HW] Parallel port number the keyboard adapter is
 			connected to, default is 0.
 			Format: <parport#>
@@ -3835,10 +4178,6 @@
 
 	pcbit=		[HW,ISDN]
 
-	pcd.		[PARIDE]
-			See header of drivers/block/paride/pcd.c.
-			See also Documentation/admin-guide/blockdev/paride.rst.
-
 	pci=option[,option...]	[PCI] various PCI subsystem options.
 
 				Some options herein operate on a specific device
@@ -3953,6 +4292,15 @@
 				please report a bug.
 		nocrs		[X86] Ignore PCI host bridge windows from ACPI.
 				If you need to use this, please report a bug.
+		use_e820	[X86] Use E820 reservations to exclude parts of
+				PCI host bridge windows. This is a workaround
+				for BIOS defects in host bridge _CRS methods.
+				If you need to use this, please report a bug to
+				<linux-pci@vger.kernel.org>.
+		no_e820		[X86] Ignore E820 reservations for PCI host
+				bridge windows. This is the default on modern
+				hardware. If you need to use this, please report
+				a bug to <linux-pci@vger.kernel.org>.
 		routeirq	Do IRQ routing for all PCI devices.
 				This is normally done in pci_enable_device(),
 				so this option is a temporary workaround
@@ -4005,7 +4353,9 @@
 				specified, e.g., 12@pci:8086:9c22:103c:198f
 				for 4096-byte alignment.
 		ecrc=		Enable/disable PCIe ECRC (transaction layer
-				end-to-end CRC checking).
+				end-to-end CRC checking). Only effective if
+				OS has native AER control (either granted by
+				ACPI _OSC or forced via "pcie_ports=native")
 				bios: Use BIOS/firmware settings. This is the
 				the default.
 				off: Turn ECRC off
@@ -4092,9 +4442,6 @@
 			for debug and development, but should not be
 			needed on a platform with proper driver support.
 
-	pd.		[PARIDE]
-			See Documentation/admin-guide/blockdev/paride.rst.
-
 	pdcchassis=	[PARISC,HW] Disable/Enable PDC Chassis Status codes at
 			boot time.
 			Format: { 0 | 1 }
@@ -4107,14 +4454,8 @@
 			allocator.  This parameter is primarily	for debugging
 			and performance comparison.
 
-	pf.		[PARIDE]
-			See Documentation/admin-guide/blockdev/paride.rst.
-
-	pg.		[PARIDE]
-			See Documentation/admin-guide/blockdev/paride.rst.
-
 	pirq=		[SMP,APIC] Manual mp-table setup
-			See Documentation/x86/i386/IO-APIC.rst.
+			See Documentation/arch/x86/i386/IO-APIC.rst.
 
 	plip=		[PPT,NET] Parallel port network link
 			Format: { parport<nr> | timid | 0 }
@@ -4124,6 +4465,14 @@
 			Override pmtimer IOPort with a hex value.
 			e.g. pmtmr=0x508
 
+	pmu_override=	[PPC] Override the PMU.
+			This option takes over the PMU facility, so it is no
+			longer usable by perf. Setting this option starts the
+			PMU counters by setting MMCR0 to 0 (the FC bit is
+			cleared). If a number is given, then MMCR1 is set to
+			that number, otherwise (e.g., 'pmu_override=on'), MMCR1
+			remains 0.
+
 	pm_debug_messages	[SUSPEND,KNL]
 			Enable suspend/resume debug messages during boot up.
 
@@ -4266,9 +4615,6 @@
 
 	pstore.backend=	Specify the name of the pstore backend to use
 
-	pt.		[PARIDE]
-			See Documentation/admin-guide/blockdev/paride.rst.
-
 	pti=		[X86-64] Control Page Table Isolation of user and
 			kernel address spaces.  Disabling this feature
 			removes hardening, but improves performance of
@@ -4281,9 +4627,6 @@
 
 			Not specifying this option is equivalent to pti=auto.
 
-	nopti		[X86-64]
-			Equivalent to pti=off
-
 	pty.legacy_count=
 			[KNL] Number of legacy pty's. Overwrites compiled-in
 			default number.
@@ -4292,6 +4635,10 @@
 
 	r128=		[HW,DRM]
 
+	radix_hcall_invalidate=on  [PPC/PSERIES]
+			Disable RADIX GTSE feature and use hcall for TLB
+			invalidate.
+
 	raid=		[HW,RAID]
 			See Documentation/admin-guide/md.rst.
 
@@ -4300,11 +4647,15 @@
 
 	ramdisk_start=	[RAM] RAM disk image start address
 
-	random.trust_cpu={on,off}
-			[KNL] Enable or disable trusting the use of the
-			CPU's random number generator (if available) to
-			fully seed the kernel's CRNG. Default is controlled
-			by CONFIG_RANDOM_TRUST_CPU.
+	random.trust_cpu=off
+			[KNL] Disable trusting the use of the CPU's
+			random number generator (if available) to
+			initialize the kernel's RNG.
+
+	random.trust_bootloader=off
+			[KNL] Disable trusting the use of the a seed
+			passed by the bootloader (if available) to
+			initialize the kernel's RNG.
 
 	randomize_kstack_offset=
 			[KNL] Enable or disable kernel stack offset
@@ -4323,19 +4674,33 @@
 				Disable the Correctable Errors Collector,
 				see CONFIG_RAS_CEC help text.
 
-	rcu_nocbs=	[KNL]
-			The argument is a cpu list, as described above.
-
-			In kernels built with CONFIG_RCU_NOCB_CPU=y, set
-			the specified list of CPUs to be no-callback CPUs.
-			Invocation of these CPUs' RCU callbacks will be
-			offloaded to "rcuox/N" kthreads created for that
-			purpose, where "x" is "p" for RCU-preempt, and
-			"s" for RCU-sched, and "N" is the CPU number.
-			This reduces OS jitter on the offloaded CPUs,
-			which can be useful for HPC and real-time
-			workloads.  It can also improve energy efficiency
-			for asymmetric multiprocessors.
+	rcu_nocbs[=cpu-list]
+			[KNL] The optional argument is a cpu list,
+			as described above.
+
+			In kernels built with CONFIG_RCU_NOCB_CPU=y,
+			enable the no-callback CPU mode, which prevents
+			such CPUs' callbacks from being invoked in
+			softirq context.  Invocation of such CPUs' RCU
+			callbacks will instead be offloaded to "rcuox/N"
+			kthreads created for that purpose, where "x" is
+			"p" for RCU-preempt, "s" for RCU-sched, and "g"
+			for the kthreads that mediate grace periods; and
+			"N" is the CPU number. This reduces OS jitter on
+			the offloaded CPUs, which can be useful for HPC
+			and real-time workloads.  It can also improve
+			energy efficiency for asymmetric multiprocessors.
+
+			If a cpulist is passed as an argument, the specified
+			list of	CPUs is set to no-callback mode from boot.
+
+			Otherwise, if the '=' sign and the cpulist
+			arguments are omitted, no CPU will be set to
+			no-callback mode from boot but the mode may be
+			toggled at runtime via cpusets.
+
+			Note that this argument takes precedence over
+			the CONFIG_RCU_NOCB_CPU_DEFAULT_ALL option.
 
 	rcu_nocb_poll	[KNL]
 			Rather than requiring that offloaded CPUs
@@ -4443,6 +4808,36 @@
 			(the least-favored priority).  Otherwise, when
 			RCU_BOOST is not set, valid values are 0-99 and
 			the default is zero (non-realtime operation).
+			When RCU_NOCB_CPU is set, also adjust the
+			priority of NOCB callback kthreads.
+
+	rcutree.rcu_divisor= [KNL]
+			Set the shift-right count to use to compute
+			the callback-invocation batch limit bl from
+			the number of callbacks queued on this CPU.
+			The result will be bounded below by the value of
+			the rcutree.blimit kernel parameter.  Every bl
+			callbacks, the softirq handler will exit in
+			order to allow the CPU to do other work.
+
+			Please note that this callback-invocation batch
+			limit applies only to non-offloaded callback
+			invocation.  Offloaded callbacks are instead
+			invoked in the context of an rcuoc kthread, which
+			scheduler will preempt as it does any other task.
+
+	rcutree.nocb_nobypass_lim_per_jiffy= [KNL]
+			On callback-offloaded (rcu_nocbs) CPUs,
+			RCU reduces the lock contention that would
+			otherwise be caused by callback floods through
+			use of the ->nocb_bypass list.	However, in the
+			common non-flooded case, RCU queues directly to
+			the main ->cblist in order to avoid the extra
+			overhead of the ->nocb_bypass list and its lock.
+			But if there are too many callbacks queued during
+			a single jiffy, RCU pre-queues the callbacks into
+			the ->nocb_bypass queue.  The definition of "too
+			many" is supplied by this kernel boot parameter.
 
 	rcutree.rcu_nocb_gp_stride= [KNL]
 			Set the number of NOCB callback kthreads in
@@ -4469,10 +4864,6 @@
 			on rcutree.qhimark at boot time and to zero to
 			disable more aggressive help enlistment.
 
-	rcutree.rcu_idle_gp_delay= [KNL]
-			Set wakeup interval for idle CPUs that have
-			RCU callbacks (RCU_FAST_NO_HZ=y).
-
 	rcutree.rcu_kick_kthreads= [KNL]
 			Cause the grace-period kthread to get an extra
 			wake_up() if it sleeps three times longer than
@@ -4583,8 +4974,12 @@
 			in seconds.
 
 	rcutorture.fwd_progress= [KNL]
-			Enable RCU grace-period forward-progress testing
+			Specifies the number of kthreads to be used
+			for  RCU grace-period forward-progress testing
 			for the types of RCU supporting this notion.
+			Defaults to 1 kthread, values less than zero or
+			greater than the number of CPUs cause the number
+			of CPUs to be used.
 
 	rcutorture.fwd_progress_div= [KNL]
 			Specify the fraction of a CPU-stall-warning
@@ -4753,6 +5148,29 @@
 
 	rcupdate.rcu_cpu_stall_timeout= [KNL]
 			Set timeout for RCU CPU stall warning messages.
+			The value is in seconds and the maximum allowed
+			value is 300 seconds.
+
+	rcupdate.rcu_exp_cpu_stall_timeout= [KNL]
+			Set timeout for expedited RCU CPU stall warning
+			messages.  The value is in milliseconds
+			and the maximum allowed value is 21000
+			milliseconds. Please note that this value is
+			adjusted to an arch timer tick resolution.
+			Setting this to zero causes the value from
+			rcupdate.rcu_cpu_stall_timeout to be used (after
+			conversion from seconds to milliseconds).
+
+	rcupdate.rcu_cpu_stall_cputime= [KNL]
+			Provide statistics on the cputime and count of
+			interrupts and tasks during the sampling period. For
+			multiple continuous RCU stalls, all sampling periods
+			begin at half of the first RCU stall timeout.
+
+	rcupdate.rcu_exp_stall_task_details= [KNL]
+			Print stack dumps of any tasks blocking the
+			current expedited RCU grace period during an
+			expedited RCU CPU stall warning.
 
 	rcupdate.rcu_expedited= [KNL]
 			Use expedited grace-period primitives, for
@@ -4785,6 +5203,29 @@
 			period to instead use normal non-expedited
 			grace-period processing.
 
+	rcupdate.rcu_task_collapse_lim= [KNL]
+			Set the maximum number of callbacks present
+			at the beginning of a grace period that allows
+			the RCU Tasks flavors to collapse back to using
+			a single callback queue.  This switching only
+			occurs when rcupdate.rcu_task_enqueue_lim is
+			set to the default value of -1.
+
+	rcupdate.rcu_task_contend_lim= [KNL]
+			Set the minimum number of callback-queuing-time
+			lock-contention events per jiffy required to
+			cause the RCU Tasks flavors to switch to per-CPU
+			callback queuing.  This switching only occurs
+			when rcupdate.rcu_task_enqueue_lim is set to
+			the default value of -1.
+
+	rcupdate.rcu_task_enqueue_lim= [KNL]
+			Set the number of callback queues to use for the
+			RCU Tasks family of RCU flavors.  The default
+			of -1 allows this to be automatically (and
+			dynamically) adjusted.	This parameter is intended
+			for use in testing.
+
 	rcupdate.rcu_task_ipi_delay= [KNL]
 			Set time in jiffies during which RCU tasks will
 			avoid sending IPIs, starting with the beginning
@@ -4792,10 +5233,34 @@
 			number avoids disturbing real-time workloads,
 			but lengthens grace periods.
 
+	rcupdate.rcu_task_stall_info= [KNL]
+			Set initial timeout in jiffies for RCU task stall
+			informational messages, which give some indication
+			of the problem for those not patient enough to
+			wait for ten minutes.  Informational messages are
+			only printed prior to the stall-warning message
+			for a given grace period. Disable with a value
+			less than or equal to zero.  Defaults to ten
+			seconds.  A change in value does not take effect
+			until the beginning of the next grace period.
+
+	rcupdate.rcu_task_stall_info_mult= [KNL]
+			Multiplier for time interval between successive
+			RCU task stall informational messages for a given
+			RCU tasks grace period.  This value is clamped
+			to one through ten, inclusive.	It defaults to
+			the value three, so that the first informational
+			message is printed 10 seconds into the grace
+			period, the second at 40 seconds, the third at
+			160 seconds, and then the stall warning at 600
+			seconds would prevent a fourth at 640 seconds.
+
 	rcupdate.rcu_task_stall_timeout= [KNL]
-			Set timeout in jiffies for RCU task stall warning
-			messages.  Disable with a value less than or equal
-			to zero.
+			Set timeout in jiffies for RCU task stall
+			warning messages.  Disable with a value less
+			than or equal to zero.	Defaults to ten minutes.
+			A change in value does not take effect until
+			the beginning of the next grace period.
 
 	rcupdate.rcu_self_test= [KNL]
 			Run the RCU early boot self tests
@@ -4815,7 +5280,7 @@
 	rdt=		[HW,X86,RDT]
 			Turn on/off individual RDT features. List is:
 			cmt, mbmtotal, mbmlocal, l3cat, l3cdp, l2cat, l2cdp,
-			mba.
+			mba, smba, bmec.
 			E.g. to turn on cmt and turn off mba use:
 				rdt=cmt,!mba
 
@@ -4914,17 +5379,45 @@
 			Useful for devices that are detected asynchronously
 			(e.g. USB and MMC devices).
 
-	hibernate=	[HIBERNATION]
-		noresume	Don't check if there's a hibernation image
-				present during boot.
-		nocompress	Don't compress/decompress hibernation images.
-		no		Disable hibernation and resume.
-		protect_image	Turn on image protection during restoration
-				(that will set all pages holding image data
-				during restoration read-only).
-
 	retain_initrd	[RAM] Keep initrd memory after extraction
 
+	retbleed=	[X86] Control mitigation of RETBleed (Arbitrary
+			Speculative Code Execution with Return Instructions)
+			vulnerability.
+
+			AMD-based UNRET and IBPB mitigations alone do not stop
+			sibling threads from influencing the predictions of other
+			sibling threads. For that reason, STIBP is used on pro-
+			cessors that support it, and mitigate SMT on processors
+			that don't.
+
+			off          - no mitigation
+			auto         - automatically select a migitation
+			auto,nosmt   - automatically select a mitigation,
+				       disabling SMT if necessary for
+				       the full mitigation (only on Zen1
+				       and older without STIBP).
+			ibpb         - On AMD, mitigate short speculation
+				       windows on basic block boundaries too.
+				       Safe, highest perf impact. It also
+				       enables STIBP if present. Not suitable
+				       on Intel.
+			ibpb,nosmt   - Like "ibpb" above but will disable SMT
+				       when STIBP is not available. This is
+				       the alternative for systems which do not
+				       have STIBP.
+			unret        - Force enable untrained return thunks,
+				       only effective on AMD f15h-f17h based
+				       systems.
+			unret,nosmt  - Like unret, but will disable SMT when STIBP
+				       is not available. This is the alternative for
+				       systems which do not have STIBP.
+
+			Selecting 'auto' will choose a mitigation method at run
+			time according to the CPU.
+
+			Not specifying this option is equivalent to retbleed=auto.
+
 	rfkill.default_state=
 		0	"airplane mode".  All wifi, bluetooth, wimax, gps, fm,
 			etc. communication is blocked by default.
@@ -4949,6 +5442,8 @@
 	rodata=		[KNL]
 		on	Mark read-only kernel memory as read-only (default).
 		off	Leave read-only kernel memory writable for debugging.
+		full	Mark read-only kernel memory and aliases as read-only
+		        [arm64]
 
 	rockchip.usb_uart
 			Enable the uart passthrough on the designated usb port
@@ -4986,6 +5481,18 @@
 			an IOTLB flush. Default is lazy flushing before reuse,
 			which is faster.
 
+	s390_iommu_aperture=	[KNL,S390]
+			Specifies the size of the per device DMA address space
+			accessible through the DMA and IOMMU APIs as a decimal
+			factor of the size of main memory.
+			The default is 1 meaning that one can concurrently use
+			as many DMA addresses as physical memory is installed,
+			if supported by hardware, and thus map all of memory
+			once. With a value of 2 one can map all of memory twice
+			and so on. As a special case a factor of 0 imposes no
+			restrictions other than those given by hardware at the
+			cost of significant additional memory use for tables.
+
 	sa1100ir	[NET]
 			See drivers/net/irda/sa1100_ir.c.
 
@@ -5124,18 +5631,22 @@
 			1 -- enable.
 			Default value is 1.
 
-	apparmor=	[APPARMOR] Disable or enable AppArmor at boot time
-			Format: { "0" | "1" }
-			See security/apparmor/Kconfig help text
-			0 -- disable.
-			1 -- enable.
-			Default value is set via kernel config option.
-
 	serialnumber	[BUGS=X86-32]
 
+	sev=option[,option...] [X86-64] See Documentation/arch/x86/x86_64/boot-options.rst
+
 	shapers=	[NET]
 			Maximal number of shapers.
 
+	show_lapic=	[APIC,X86] Advanced Programmable Interrupt Controller
+			Limit apic dumping. The parameter defines the maximal
+			number of local apics being dumped. Also it is possible
+			to set it to "all" by meaning -- no limit here.
+			Format: { 1 (default) | 2 | ... | all }.
+			The parameter valid if only apic=debug or
+			apic=verbose is specified.
+			Example: apic=debug show_lapic=all
+
 	simeth=		[IA-64]
 	simscsi=
 
@@ -5156,7 +5667,7 @@
 			cache (risks via metadata attacks are mostly
 			unchanged). Debug options disable merging on their
 			own.
-			For more information see Documentation/vm/slub.rst.
+			For more information see Documentation/mm/slub.rst.
 
 	slab_max_order=	[MM, SLAB]
 			Determines the maximum allowed order for slabs.
@@ -5170,13 +5681,13 @@
 			slub_debug can create guard zones around objects and
 			may poison objects when not in use. Also tracks the
 			last alloc / free. For more information see
-			Documentation/vm/slub.rst.
+			Documentation/mm/slub.rst.
 
 	slub_max_order= [MM, SLUB]
 			Determines the maximum allowed order for slabs.
 			A high setting may cause OOMs due to memory
 			fragmentation. For more information see
-			Documentation/vm/slub.rst.
+			Documentation/mm/slub.rst.
 
 	slub_min_objects=	[MM, SLUB]
 			The minimum number of objects per slab. SLUB will
@@ -5185,12 +5696,12 @@
 			the number of objects indicated. The higher the number
 			of objects the smaller the overhead of tracking slabs
 			and the less frequently locks need to be acquired.
-			For more information see Documentation/vm/slub.rst.
+			For more information see Documentation/mm/slub.rst.
 
 	slub_min_order=	[MM, SLUB]
 			Determines the minimum page order for slabs. Must be
 			lower than slub_max_order.
-			For more information see Documentation/vm/slub.rst.
+			For more information see Documentation/mm/slub.rst.
 
 	slub_merge	[MM, SLUB]
 			Same with slab_merge.
@@ -5202,6 +5713,17 @@
 	smart2=		[HW]
 			Format: <io1>[,<io2>[,...,<io8>]]
 
+	smp.csd_lock_timeout= [KNL]
+			Specify the period of time in milliseconds
+			that smp_call_function() and friends will wait
+			for a CPU to release the CSD lock.  This is
+			useful when diagnosing bugs involving CPUs
+			disabling interrupts for extended periods
+			of time.  Defaults to 5,000 milliseconds, and
+			setting a value of zero disables this feature.
+			This feature may be more efficiently disabled
+			using the csdlock_debug- kernel parameter.
+
 	smsc-ircc2.nopnp	[HW] Don't use PNP to discover SMC devices
 	smsc-ircc2.ircc_cfg=	[HW] Device configuration I/O port
 	smsc-ircc2.ircc_sir=	[HW] SIR base I/O port
@@ -5213,7 +5735,7 @@
 				1: Fast pin select (default)
 				2: ATC IRMode
 
-	smt		[KNL,S390] Set the maximum number of threads (logical
+	smt=		[KNL,S390] Set the maximum number of threads (logical
 			CPUs) to use per physical CPU on systems capable of
 			symmetric multithreading (SMT). Will be capped to the
 			actual hardware limit.
@@ -5265,8 +5787,13 @@
 			Specific mitigations can also be selected manually:
 
 			retpoline	  - replace indirect branches
-			retpoline,generic - google's original retpoline
-			retpoline,amd     - AMD-specific minimal thunk
+			retpoline,generic - Retpolines
+			retpoline,lfence  - LFENCE; indirect branch
+			retpoline,amd     - alias for retpoline,lfence
+			eibrs		  - Enhanced/Auto IBRS
+			eibrs,retpoline   - Enhanced/Auto IBRS + Retpolines
+			eibrs,lfence      - Enhanced/Auto IBRS + LFENCE
+			ibrs		  - use IBRS to protect kernel
 
 			Not specifying this option is equivalent to
 			spectre_v2=auto.
@@ -5307,8 +5834,7 @@
 			auto    - Kernel selects the mitigation depending on
 				  the available CPU features and vulnerability.
 
-			Default mitigation:
-			If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl"
+			Default mitigation: "prctl"
 
 			Not specifying this option is equivalent to
 			spectre_v2_user=auto.
@@ -5352,7 +5878,7 @@
 				  will disable SSB unless they explicitly opt out.
 
 			Default mitigations:
-			X86:	If CONFIG_SECCOMP=y "seccomp", otherwise "prctl"
+			X86:	"prctl"
 
 			On powerpc the options are:
 
@@ -5430,6 +5956,30 @@
 			off:    Disable mitigation and remove
 				performance impact to RDRAND and RDSEED
 
+	srcutree.big_cpu_lim [KNL]
+			Specifies the number of CPUs constituting a
+			large system, such that srcu_struct structures
+			should immediately allocate an srcu_node array.
+			This kernel-boot parameter defaults to 128,
+			but takes effect only when the low-order four
+			bits of srcutree.convert_to_big is equal to 3
+			(decide at boot).
+
+	srcutree.convert_to_big [KNL]
+			Specifies under what conditions an SRCU tree
+			srcu_struct structure will be converted to big
+			form, that is, with an rcu_node tree:
+
+				   0:  Never.
+				   1:  At init_srcu_struct() time.
+				   2:  When rcutorture decides to.
+				   3:  Decide at boot time (default).
+				0x1X:  Above plus if high contention.
+
+			Either way, the srcu_node tree will be sized based
+			on the actual runtime number of CPUs (nr_cpu_ids)
+			instead of the compile-time CONFIG_NR_CPUS.
+
 	srcutree.counter_wrap_check [KNL]
 			Specifies how frequently to check for
 			grace-period sequence counter wrap for the
@@ -5447,6 +5997,32 @@
 			expediting.  Set to zero to disable automatic
 			expediting.
 
+	srcutree.srcu_max_nodelay [KNL]
+			Specifies the number of no-delay instances
+			per jiffy for which the SRCU grace period
+			worker thread will be rescheduled with zero
+			delay. Beyond this limit, worker thread will
+			be rescheduled with a sleep delay of one jiffy.
+
+	srcutree.srcu_max_nodelay_phase [KNL]
+			Specifies the per-grace-period phase, number of
+			non-sleeping polls of readers. Beyond this limit,
+			grace period worker thread will be rescheduled
+			with a sleep delay of one jiffy, between each
+			rescan of the readers, for a grace period phase.
+
+	srcutree.srcu_retry_check_delay [KNL]
+			Specifies number of microseconds of non-sleeping
+			delay between each non-sleeping poll of readers.
+
+	srcutree.small_contention_lim [KNL]
+			Specifies the number of update-side contention
+			events per jiffy will be tolerated before
+			initiating a conversion of an srcu_struct
+			structure to big form.	Note that the value of
+			srcutree.convert_to_big must have the 0x10 bit
+			set for contention-based conversions to occur.
+
 	ssbd=		[ARM64,HW]
 			Speculative Store Bypass Disable control
 
@@ -5501,6 +6077,25 @@
 	stifb=		[HW]
 			Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
 
+        strict_sas_size=
+			[X86]
+			Format: <bool>
+			Enable or disable strict sigaltstack size checks
+			against the required signal frame size which
+			depends on the supported FPU features. This can
+			be used to filter out binaries which have
+			not yet been made aware of AT_MINSIGSTKSZ.
+
+	stress_hpt	[PPC]
+			Limits the number of kernel HPT entries in the hash
+			page table to increase the rate of hash page table
+			faults on kernel addresses.
+
+	stress_slb	[PPC]
+			Limits the number of kernel SLB entries, and flushes
+			them frequently to increase the rate of SLB faults
+			on kernel addresses.
+
 	sunrpc.min_resvport=
 	sunrpc.max_resvport=
 			[NFS,SUNRPC]
@@ -5556,14 +6151,12 @@
 			This parameter controls use of the Protected
 			Execution Facility on pSeries.
 
-	swapaccount=[0|1]
-			[KNL] Enable accounting of swap in memory resource
-			controller if no parameter or 1 is given or disable
-			it if 0 is given (See Documentation/admin-guide/cgroup-v1/memory.rst)
-
 	swiotlb=	[ARM,IA-64,PPC,MIPS,X86]
-			Format: { <int> | force | noforce }
+			Format: { <int> [,<int>] | force | noforce }
 			<int> -- Number of I/O TLB slabs
+			<int> -- Second integer after comma. Number of swiotlb
+				 areas with their own lock. Will be rounded up
+				 to a power of 2.
 			force -- force using of bounce buffers even if they
 			         wouldn't be automatically used by the kernel
 			noforce -- Never use bounce buffers (for debugging)
@@ -5579,15 +6172,6 @@
 			later by a loaded module cannot be set this way.
 			Example: sysctl.vm.swappiness=40
 
-	sysfs.deprecated=0|1 [KNL]
-			Enable/disable old style sysfs layout for old udev
-			on older distributions. When this option is enabled
-			very new udev will not work anymore. When this option
-			is disabled (or CONFIG_SYSFS_DEPRECATED not compiled)
-			in older udev will not work anymore.
-			Default depends on CONFIG_SYSFS_DEPRECATED_V2 set in
-			the kernel configuration.
-
 	sysrq_always_enabled
 			[KNL]
 			Ignore sysrq setting - this boot parameter will
@@ -5603,7 +6187,8 @@
 
 	tdfx=		[HW,DRM]
 
-	test_suspend=	[SUSPEND][,N]
+	test_suspend=	[SUSPEND]
+			Format: { "mem" | "standby" | "freeze" }[,N]
 			Specify "mem" (for Suspend-to-RAM) or "standby" (for
 			standby suspend) or "freeze" (for suspend type freeze)
 			as the system sleep state during system startup with
@@ -5687,22 +6272,95 @@
 			This will guarantee that all the other pcrs
 			are saved.
 
+	tp_printk	[FTRACE]
+			Have the tracepoints sent to printk as well as the
+			tracing ring buffer. This is useful for early boot up
+			where the system hangs or reboots and does not give the
+			option for reading the tracing buffer or performing a
+			ftrace_dump_on_oops.
+
+			To turn off having tracepoints sent to printk,
+			 echo 0 > /proc/sys/kernel/tracepoint_printk
+			Note, echoing 1 into this file without the
+			tracepoint_printk kernel cmdline option has no effect.
+
+			The tp_printk_stop_on_boot (see below) can also be used
+			to stop the printing of events to console at
+			late_initcall_sync.
+
+			** CAUTION **
+
+			Having tracepoints sent to printk() and activating high
+			frequency tracepoints such as irq or sched, can cause
+			the system to live lock.
+
+	tp_printk_stop_on_boot [FTRACE]
+			When tp_printk (above) is set, it can cause a lot of noise
+			on the console. It may be useful to only include the
+			printing of events during boot up, as user space may
+			make the system inoperable.
+
+			This command line option will stop the printing of events
+			to console at the late_initcall_sync() time frame.
+
 	trace_buf_size=nn[KMG]
 			[FTRACE] will set tracing buffer size on each cpu.
 
+	trace_clock=	[FTRACE] Set the clock used for tracing events
+			at boot up.
+			local - Use the per CPU time stamp counter
+				(converted into nanoseconds). Fast, but
+				depending on the architecture, may not be
+				in sync between CPUs.
+			global - Event time stamps are synchronize across
+				CPUs. May be slower than the local clock,
+				but better for some race conditions.
+			counter - Simple counting of events (1, 2, ..)
+				note, some counts may be skipped due to the
+				infrastructure grabbing the clock more than
+				once per event.
+			uptime - Use jiffies as the time stamp.
+			perf - Use the same clock that perf uses.
+			mono - Use ktime_get_mono_fast_ns() for time stamps.
+			mono_raw - Use ktime_get_raw_fast_ns() for time
+				stamps.
+			boot - Use ktime_get_boot_fast_ns() for time stamps.
+			Architectures may add more clocks. See
+			Documentation/trace/ftrace.rst for more details.
+
 	trace_event=[event-list]
 			[FTRACE] Set and start specified trace events in order
 			to facilitate early boot debugging. The event-list is a
 			comma-separated list of trace events to enable. See
 			also Documentation/trace/events.rst
 
+	trace_instance=[instance-info]
+			[FTRACE] Create a ring buffer instance early in boot up.
+			This will be listed in:
+
+				/sys/kernel/tracing/instances
+
+			Events can be enabled at the time the instance is created
+			via:
+
+				trace_instance=<name>,<system1>:<event1>,<system2>:<event2>
+
+			Note, the "<system*>:" portion is optional if the event is
+			unique.
+
+				trace_instance=foo,sched:sched_switch,irq_handler_entry,initcall
+
+			will enable the "sched_switch" event (note, the "sched:" is optional, and
+			the same thing would happen if it was left off). The irq_handler_entry
+			event, and all events under the "initcall" system.
+
 	trace_options=[option-list]
 			[FTRACE] Enable or disable tracer options at boot.
 			The option-list is a comma delimited list of options
 			that can be enabled or disabled just as if you were
 			to echo the option name into
 
-			    /sys/kernel/debug/tracing/trace_options
+			    /sys/kernel/tracing/trace_options
 
 			For example, to enable stacktrace option (to dump the
 			stack trace of each event), add to the command line:
@@ -5712,42 +6370,30 @@
 			See also Documentation/trace/ftrace.rst "trace options"
 			section.
 
-	tp_printk[FTRACE]
-			Have the tracepoints sent to printk as well as the
-			tracing ring buffer. This is useful for early boot up
-			where the system hangs or reboots and does not give the
-			option for reading the tracing buffer or performing a
-			ftrace_dump_on_oops.
+	trace_trigger=[trigger-list]
+			[FTRACE] Add a event trigger on specific events.
+			Set a trigger on top of a specific event, with an optional
+			filter.
 
-			To turn off having tracepoints sent to printk,
-			 echo 0 > /proc/sys/kernel/tracepoint_printk
-			Note, echoing 1 into this file without the
-			tracepoint_printk kernel cmdline option has no effect.
+			The format is is "trace_trigger=<event>.<trigger>[ if <filter>],..."
+			Where more than one trigger may be specified that are comma deliminated.
 
-			The tp_printk_stop_on_boot (see below) can also be used
-			to stop the printing of events to console at
-			late_initcall_sync.
+			For example:
 
-			** CAUTION **
+			  trace_trigger="sched_switch.stacktrace if prev_state == 2"
 
-			Having tracepoints sent to printk() and activating high
-			frequency tracepoints such as irq or sched, can cause
-			the system to live lock.
+			The above will enable the "stacktrace" trigger on the "sched_switch"
+			event but only trigger it if the "prev_state" of the "sched_switch"
+			event is "2" (TASK_UNINTERUPTIBLE).
 
-	tp_printk_stop_on_boot[FTRACE]
-			When tp_printk (above) is set, it can cause a lot of noise
-			on the console. It may be useful to only include the
-			printing of events during boot up, as user space may
-			make the system inoperable.
+			See also "Event triggers" in Documentation/trace/events.rst
 
-			This command line option will stop the printing of events
-			to console at the late_initcall_sync() time frame.
 
 	traceoff_on_warning
 			[FTRACE] enable this option to disable tracing when a
 			warning is hit. This turns off "tracing_on". Tracing can
 			be enabled again by echoing '1' into the "tracing_on"
-			file located in /sys/kernel/debug/tracing/
+			file located in /sys/kernel/tracing/
 
 			This option is useful, as it disables the trace before
 			the WARNING dump is called, which prevents the trace to
@@ -5771,11 +6417,22 @@
 			sources:
 			- "tpm"
 			- "tee"
+			- "caam"
 			If not specified then it defaults to iterating through
 			the trust source list starting with TPM and assigns the
 			first trust source as a backend which is initialized
 			successfully during iteration.
 
+	trusted.rng=	[KEYS]
+			Format: <string>
+			The RNG used to generate key material for trusted keys.
+			Can be one of:
+			- "kernel"
+			- the same value as trusted.source: "tpm" or "tee"
+			- "default"
+			If not specified, "default" is used. In this case,
+			the RNG's choice is left to each individual trust source.
+
 	tsc=		Disable clocksource stability checks for TSC.
 			Format: <string>
 			[x86] reliable: mark tsc clocksource as reliable, this
@@ -5794,6 +6451,16 @@
 			in situations with strict latency requirements (where
 			interruptions from clocksource watchdog are not
 			acceptable).
+			[x86] recalibrate: force recalibration against a HW timer
+			(HPET or PM timer) on systems whose TSC frequency was
+			obtained from HW or FW using either an MSR or CPUID(0x15).
+			Warn if the difference is more than 500 ppm.
+			[x86] watchdog: Use TSC as the watchdog clocksource with
+			which to check other HW timers (HPET or PM timer), but
+			only on systems where TSC has been deemed trustworthy.
+			This will be suppressed by an earlier tsc=nowatchdog and
+			can be overridden by a later tsc=nowatchdog.  A console
+			message will flag any such suppression or overriding.
 
 	tsc_early_khz=  [X86] Skip early TSC calibration and use the given
 			value instead. Useful when the early TSC frequency discovery
@@ -6083,7 +6750,7 @@
 					HIGHMEM regardless of setting
 					of CONFIG_HIGHPTE.
 
-	vdso=		[X86,SH]
+	vdso=		[X86,SH,SPARC]
 			On X86_32, this is an alias for vdso32=.  Otherwise:
 
 			vdso=1: enable VDSO (the default)
@@ -6109,11 +6776,12 @@
 	video=		[FB] Frame buffer configuration
 			See Documentation/fb/modedb.rst.
 
-	video.brightness_switch_enabled= [0,1]
+	video.brightness_switch_enabled= [ACPI]
+			Format: [0|1]
 			If set to 1, on receiving an ACPI notify event
 			generated by hotkey, video driver will adjust brightness
 			level and then send out the event to user space through
-			the allocated input device; If set to 0, video driver
+			the allocated input device. If set to 0, video driver
 			will only send out the event without touching backlight
 			brightness level.
 			default: 1
@@ -6135,7 +6803,7 @@
 			Can be used multiple times for multiple devices.
 
 	vga=		[BOOT,X86-32] Select a particular video mode
-			See Documentation/x86/boot.rst and
+			See Documentation/arch/x86/boot.rst and
 			Documentation/admin-guide/svga.rst.
 			Use vga=ask for menu.
 			This is actually a boot loader parameter; the value is
@@ -6180,11 +6848,11 @@
 			functions are at fixed addresses, they make nice
 			targets for exploits that can control RIP.
 
-			emulate     [default] Vsyscalls turn into traps and are
-			            emulated reasonably safely.  The vsyscall
-				    page is readable.
+			emulate     Vsyscalls turn into traps and are emulated
+			            reasonably safely.  The vsyscall page is
+				    readable.
 
-			xonly       Vsyscalls turn into traps and are
+			xonly       [default] Vsyscalls turn into traps and are
 			            emulated reasonably safely.  The vsyscall
 				    page is not readable.
 
@@ -6298,6 +6966,12 @@
 			When enabled, memory and cache locality will be
 			impacted.
 
+	writecombine=	[LOONGARCH] Control the MAT (Memory Access Type) of
+			ioremap_wc().
+
+			on   - Enable writecombine, use WUC for ioremap_wc()
+			off  - Disable writecombine, use SUC for ioremap_wc()
+
 	x2apic_phys	[X86-64,APIC] Use x2apic physical mode instead of
 			default x2apic cluster mode on platforms
 			supporting x2apic.
@@ -6325,6 +6999,12 @@
 			Crash from Xen panic notifier, without executing late
 			panic() code such as dumping handler.
 
+	xen_msr_safe=	[X86,XEN]
+			Format: <bool>
+			Select whether to always use non-faulting (safe) MSR
+			access functions when running as Xen PV guest. The
+			default value is controlled by CONFIG_XEN_PV_MSR_SAFE.
+
 	xen_nopvspin	[X86,XEN]
 			Disables the qspinlock slowpath using Xen PV optimizations.
 			This parameter is obsoleted by "nopvspin" parameter, which
@@ -6353,6 +7033,13 @@
 			improve timer resolution at the expense of processing
 			more timer interrupts.
 
+	xen.balloon_boot_timeout= [XEN]
+			The time (in seconds) to wait before giving up to boot
+			in case initial ballooning fails to free enough memory.
+			Applies only when running as HVM or PVH guest and
+			started with less memory configured than allowed at
+			max. Default is 180.
+
 	xen.event_eoi_delay=	[XEN]
 			How long to delay EOI handling in case of event
 			storms (jiffies). Default is 10.
@@ -6368,16 +7055,6 @@
 			fairer and the number of possible event channels is
 			much higher. Default is on (use fifo events).
 
-	nopv=		[X86,XEN,KVM,HYPER_V,VMWARE]
-			Disables the PV optimizations forcing the guest to run
-			as generic guest with no PV drivers. Currently support
-			XEN HVM, KVM, HYPER_V and VMWARE guest.
-
-	nopvspin	[X86,XEN,KVM]
-			Disables the qspinlock slow path using PV optimizations
-			which allow the hypervisor to 'idle' the guest on lock
-			contention.
-
 	xirc2ps_cs=	[NET,PCMCIA]
 			Format:
 			<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
@@ -6391,6 +7068,12 @@
 				  controller on both pseries and powernv
 				  platforms. Only useful on POWER9 and above.
 
+	xive.store-eoi=off	[PPC]
+			By default on POWER10 and above, the kernel will use
+			stores for EOI handling when the XIVE interrupt mode
+			is active. This option allows the XIVE driver to use
+			loads instead, as on POWER9.
+
 	xhci-hcd.quirks		[USB,KNL]
 			A hex value specifying bitmask with supplemental xhci
 			host controller quirks. Meaning of each bit can be
@@ -6414,3 +7097,4 @@
 				memory, and other data can't be written using
 				xmon commands.
 			off	xmon is disabled.
+
diff --git a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
index 5e51ee5b0358..993c2a05f5ee 100644
--- a/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
+++ b/Documentation/admin-guide/kernel-per-CPU-kthreads.rst
@@ -25,7 +25,7 @@ References
 
 -	In order to locate kernel-generated OS jitter on CPU N:
 
-		cd /sys/kernel/debug/tracing
+		cd /sys/kernel/tracing
 		echo 1 > max_graph_depth # Increase the "1" for more detail
 		echo function_graph > current_tracer
 		# run workload
@@ -208,7 +208,7 @@ Do at least one of the following:
 2.	Enable RCU to do its processing remotely via dyntick-idle by
 	doing all of the following:
 
-	a.	Build with CONFIG_NO_HZ=y and CONFIG_RCU_FAST_NO_HZ=y.
+	a.	Build with CONFIG_NO_HZ=y.
 	b.	Ensure that the CPU goes idle frequently, allowing other
 		CPUs to detect that it has passed through an RCU quiescent
 		state.	If the kernel is built with CONFIG_NO_HZ_FULL=y,
diff --git a/Documentation/admin-guide/laptops/lg-laptop.rst b/Documentation/admin-guide/laptops/lg-laptop.rst
index 6fbe165dcd27..67fd6932cef4 100644
--- a/Documentation/admin-guide/laptops/lg-laptop.rst
+++ b/Documentation/admin-guide/laptops/lg-laptop.rst
@@ -38,7 +38,7 @@ FN lock.
 Battery care limit
 ------------------
 
-Writing 80/100 to /sys/devices/platform/lg-laptop/battery_care_limit
+Writing 80/100 to /sys/class/power_supply/CMB0/charge_control_end_threshold
 sets the maximum capacity to charge the battery. Limiting the charge
 reduces battery capacity loss over time.
 
diff --git a/Documentation/admin-guide/laptops/thinkpad-acpi.rst b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
index 6721a80a2d4f..e27a1c3f634e 100644
--- a/Documentation/admin-guide/laptops/thinkpad-acpi.rst
+++ b/Documentation/admin-guide/laptops/thinkpad-acpi.rst
@@ -1488,7 +1488,7 @@ Example of command to set keyboard language is mentioned below::
 Text corresponding to keyboard layout to be set in sysfs are: be(Belgian),
 cz(Czech), da(Danish), de(German), en(English), es(Spain), et(Estonian),
 fr(French), fr-ch(French(Switzerland)), hu(Hungarian), it(Italy), jp (Japan),
-nl(Dutch), nn(Norway), pl(Polish), pt(portugese), sl(Slovenian), sv(Sweden),
+nl(Dutch), nn(Norway), pl(Polish), pt(portuguese), sl(Slovenian), sv(Sweden),
 tr(Turkey)
 
 WWAN Antenna type
@@ -1520,15 +1520,15 @@ This sysfs attribute controls the keyboard "face" that will be shown on the
 Lenovo X1 Carbon 2nd gen (2014)'s adaptive keyboard. The value can be read
 and set.
 
-- 1 = Home mode
-- 2 = Web-browser mode
-- 3 = Web-conference mode
-- 4 = Function mode
-- 5 = Layflat mode
+- 0 = Home mode
+- 1 = Web-browser mode
+- 2 = Web-conference mode
+- 3 = Function mode
+- 4 = Layflat mode
 
 For more details about which buttons will appear depending on the mode, please
 review the laptop's user guide:
-http://www.lenovo.com/shop/americas/content/user_guides/x1carbon_2_ug_en.pdf
+https://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/x1carbon_2_ug_en.pdf
 
 Battery charge control
 ----------------------
diff --git a/Documentation/admin-guide/md.rst b/Documentation/admin-guide/md.rst
index d8fc9a59c086..4ff2cc291d18 100644
--- a/Documentation/admin-guide/md.rst
+++ b/Documentation/admin-guide/md.rst
@@ -317,7 +317,7 @@ All md devices contain:
      suspended (not supported yet)
          All IO requests will block. The array can be reconfigured.
 
-         Writing this, if accepted, will block until array is quiessent
+         Writing this, if accepted, will block until array is quiescent
 
      readonly
          no resync can happen.  no superblocks get written.
diff --git a/Documentation/admin-guide/media/bttv.rst b/Documentation/admin-guide/media/bttv.rst
index 125f6f47123d..58cbaf6df694 100644
--- a/Documentation/admin-guide/media/bttv.rst
+++ b/Documentation/admin-guide/media/bttv.rst
@@ -909,7 +909,7 @@ DE hat diverse Treiber fuer diese Modelle (Stand 09/2002):
   - TVPhone98 (Bt878)
   - AVerTV und TVCapture98 w/VCR (Bt 878)
   - AVerTVStudio und TVPhone98 w/VCR (Bt878)
-  - AVerTV GO Serie (Kein SVideo Input)
+  - AVerTV GO Series (Kein SVideo Input)
   - AVerTV98 (BT-878 chip)
   - AVerTV98 mit Fernbedienung (BT-878 chip)
   - AVerTV/FM98 (BT-878 chip)
diff --git a/Documentation/admin-guide/media/building.rst b/Documentation/admin-guide/media/building.rst
index 2d660b76caea..a06473429916 100644
--- a/Documentation/admin-guide/media/building.rst
+++ b/Documentation/admin-guide/media/building.rst
@@ -137,7 +137,7 @@ The ``LIRC user interface`` option adds enhanced functionality when using the
 from remote controllers.
 
 The ``Support for eBPF programs attached to lirc devices`` option allows
-the usage of special programs (called eBPF) that would allow aplications
+the usage of special programs (called eBPF) that would allow applications
 to add extra remote controller decoding functionality to the Linux Kernel.
 
 The ``Remote controller decoders`` option allows selecting the
diff --git a/Documentation/admin-guide/media/cec-drivers.rst b/Documentation/admin-guide/media/cec-drivers.rst
deleted file mode 100644
index 8d9686c08df9..000000000000
--- a/Documentation/admin-guide/media/cec-drivers.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-=================================
-CEC driver-specific documentation
-=================================
-
-.. toctree::
-	:maxdepth: 2
-
-	pulse8-cec
diff --git a/Documentation/admin-guide/media/cec.rst b/Documentation/admin-guide/media/cec.rst
new file mode 100644
index 000000000000..6b30e355cf23
--- /dev/null
+++ b/Documentation/admin-guide/media/cec.rst
@@ -0,0 +1,380 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========
+HDMI CEC
+========
+
+Supported hardware in mainline
+==============================
+
+HDMI Transmitters:
+
+- Exynos4
+- Exynos5
+- STIH4xx HDMI CEC
+- V4L2 adv7511 (same HW, but a different driver from the drm adv7511)
+- stm32
+- Allwinner A10 (sun4i)
+- Raspberry Pi
+- dw-hdmi (Synopsis IP)
+- amlogic (meson ao-cec and ao-cec-g12a)
+- drm adv7511/adv7533
+- omap4
+- tegra
+- rk3288, rk3399
+- tda998x
+- DisplayPort CEC-Tunneling-over-AUX on i915, nouveau and amdgpu
+- ChromeOS EC CEC
+- CEC for SECO boards (UDOO x86).
+- Chrontel CH7322
+
+
+HDMI Receivers:
+
+- adv7604/11/12
+- adv7842
+- tc358743
+
+USB Dongles (see below for additional information on how to use these
+dongles):
+
+- Pulse-Eight: the pulse8-cec driver implements the following module option:
+  ``persistent_config``: by default this is off, but when set to 1 the driver
+  will store the current settings to the device's internal eeprom and restore
+  it the next time the device is connected to the USB port.
+- RainShadow Tech. Note: this driver does not support the persistent_config
+  module option of the Pulse-Eight driver. The hardware supports it, but I
+  have no plans to add this feature. But I accept patches :-)
+
+Miscellaneous:
+
+- vivid: emulates a CEC receiver and CEC transmitter.
+  Can be used to test CEC applications without actual CEC hardware.
+
+- cec-gpio. If the CEC pin is hooked up to a GPIO pin then
+  you can control the CEC line through this driver. This supports error
+  injection as well.
+
+- cec-gpio and Allwinner A10 (or any other driver that uses the CEC pin
+  framework to drive the CEC pin directly): the CEC pin framework uses
+  high-resolution timers. These timers are affected by NTP daemons that
+  speed up or slow down the clock to sync with the official time. The
+  chronyd server will by default increase or decrease the clock by
+  1/12th. This will cause the CEC timings to go out of spec. To fix this,
+  add a 'maxslewrate 40000' line to chronyd.conf. This limits the clock
+  frequency change to 1/25th, which keeps the CEC timings within spec.
+
+
+Utilities
+=========
+
+Utilities are available here: https://git.linuxtv.org/v4l-utils.git
+
+``utils/cec-ctl``: control a CEC device
+
+``utils/cec-compliance``: test compliance of a remote CEC device
+
+``utils/cec-follower``: emulate a CEC follower device
+
+Note that ``cec-ctl`` has support for the CEC Hospitality Profile as is
+used in some hotel displays. See http://www.htng.org.
+
+Note that the libcec library (https://github.com/Pulse-Eight/libcec) supports
+the linux CEC framework.
+
+If you want to get the CEC specification, then look at the References of
+the HDMI wikipedia page: https://en.wikipedia.org/wiki/HDMI. CEC is part
+of the HDMI specification. HDMI 1.3 is freely available (very similar to
+HDMI 1.4 w.r.t. CEC) and should be good enough for most things.
+
+
+DisplayPort to HDMI Adapters with working CEC
+=============================================
+
+Background: most adapters do not support the CEC Tunneling feature,
+and of those that do many did not actually connect the CEC pin.
+Unfortunately, this means that while a CEC device is created, it
+is actually all alone in the world and will never be able to see other
+CEC devices.
+
+This is a list of known working adapters that have CEC Tunneling AND
+that properly connected the CEC pin. If you find adapters that work
+but are not in this list, then drop me a note.
+
+To test: hook up your DP-to-HDMI adapter to a CEC capable device
+(typically a TV), then run::
+
+	cec-ctl --playback	# Configure the PC as a CEC Playback device
+	cec-ctl -S		# Show the CEC topology
+
+The ``cec-ctl -S`` command should show at least two CEC devices,
+ourselves and the CEC device you are connected to (i.e. typically the TV).
+
+General note: I have only seen this work with the Parade PS175, PS176 and
+PS186 chipsets and the MegaChips 2900. While MegaChips 28x0 claims CEC support,
+I have never seen it work.
+
+USB-C to HDMI
+-------------
+
+Samsung Multiport Adapter EE-PW700: https://www.samsung.com/ie/support/model/EE-PW700BBEGWW/
+
+Kramer ADC-U31C/HF: https://www.kramerav.com/product/ADC-U31C/HF
+
+Club3D CAC-2504: https://www.club-3d.com/en/detail/2449/usb_3.1_type_c_to_hdmi_2.0_uhd_4k_60hz_active_adapter/
+
+DisplayPort to HDMI
+-------------------
+
+Club3D CAC-1080: https://www.club-3d.com/en/detail/2442/displayport_1.4_to_hdmi_2.0b_hdr/
+
+CableCreation (SKU: CD0712): https://www.cablecreation.com/products/active-displayport-to-hdmi-adapter-4k-hdr
+
+HP DisplayPort to HDMI True 4k Adapter (P/N 2JA63AA): https://www.hp.com/us-en/shop/pdp/hp-displayport-to-hdmi-true-4k-adapter
+
+Mini-DisplayPort to HDMI
+------------------------
+
+Club3D CAC-1180: https://www.club-3d.com/en/detail/2443/mini_displayport_1.4_to_hdmi_2.0b_hdr/
+
+Note that passive adapters will never work, you need an active adapter.
+
+The Club3D adapters in this list are all MegaChips 2900 based. Other Club3D adapters
+are PS176 based and do NOT have the CEC pin hooked up, so only the three Club3D
+adapters above are known to work.
+
+I suspect that MegaChips 2900 based designs in general are likely to work
+whereas with the PS176 it is more hit-and-miss (mostly miss). The PS186 is
+likely to have the CEC pin hooked up, it looks like they changed the reference
+design for that chipset.
+
+
+USB CEC Dongles
+===============
+
+These dongles appear as ``/dev/ttyACMX`` devices and need the ``inputattach``
+utility to create the ``/dev/cecX`` devices. Support for the Pulse-Eight
+has been added to ``inputattach`` 1.6.0. Support for the Rainshadow Tech has
+been added to ``inputattach`` 1.6.1.
+
+You also need udev rules to automatically start systemd services::
+
+	SUBSYSTEM=="tty", KERNEL=="ttyACM[0-9]*", ATTRS{idVendor}=="2548", ATTRS{idProduct}=="1002", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}+="pulse8-cec-inputattach@%k.service"
+	SUBSYSTEM=="tty", KERNEL=="ttyACM[0-9]*", ATTRS{idVendor}=="2548", ATTRS{idProduct}=="1001", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}+="pulse8-cec-inputattach@%k.service"
+	SUBSYSTEM=="tty", KERNEL=="ttyACM[0-9]*", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="ff59", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}+="rainshadow-cec-inputattach@%k.service"
+
+and these systemd services:
+
+For Pulse-Eight make /lib/systemd/system/pulse8-cec-inputattach@.service::
+
+	[Unit]
+	Description=inputattach for pulse8-cec device on %I
+
+	[Service]
+	Type=simple
+	ExecStart=/usr/bin/inputattach --pulse8-cec /dev/%I
+
+For the RainShadow Tech make /lib/systemd/system/rainshadow-cec-inputattach@.service::
+
+	[Unit]
+	Description=inputattach for rainshadow-cec device on %I
+
+	[Service]
+	Type=simple
+	ExecStart=/usr/bin/inputattach --rainshadow-cec /dev/%I
+
+
+For proper suspend/resume support create: /lib/systemd/system/restart-cec-inputattach.service::
+
+	[Unit]
+	Description=restart inputattach for cec devices
+	After=suspend.target
+
+	[Service]
+	Type=forking
+	ExecStart=/bin/bash -c 'for d in /dev/serial/by-id/usb-Pulse-Eight*; do /usr/bin/inputattach --daemon --pulse8-cec $d; done; for d in /dev/serial/by-id/usb-RainShadow_Tech*; do /usr/bin/inputattach --daemon --rainshadow-cec $d; done'
+
+	[Install]
+	WantedBy=suspend.target
+
+And run ``systemctl enable restart-cec-inputattach``.
+
+To automatically set the physical address of the CEC device whenever the
+EDID changes, you can use ``cec-ctl`` with the ``-E`` option::
+
+	cec-ctl -E /sys/class/drm/card0-DP-1/edid
+
+This assumes the dongle is connected to the card0-DP-1 output (``xrandr`` will tell
+you which output is used) and it will poll for changes to the EDID and update
+the Physical Address whenever they occur.
+
+To automatically run this command you can use cron. Edit crontab with
+``crontab -e`` and add this line::
+
+	@reboot /usr/local/bin/cec-ctl -E /sys/class/drm/card0-DP-1/edid
+
+This only works for display drivers that expose the EDID in ``/sys/class/drm``,
+such as the i915 driver.
+
+
+CEC Without HPD
+===============
+
+Some displays when in standby mode have no HDMI Hotplug Detect signal, but
+CEC is still enabled so connected devices can send an <Image View On> CEC
+message in order to wake up such displays. Unfortunately, not all CEC
+adapters can support this. An example is the Odroid-U3 SBC that has a
+level-shifter that is powered off when the HPD signal is low, thus
+blocking the CEC pin. Even though the SoC can use CEC without a HPD,
+the level-shifter will prevent this from functioning.
+
+There is a CEC capability flag to signal this: ``CEC_CAP_NEEDS_HPD``.
+If set, then the hardware cannot wake up displays with this behavior.
+
+Note for CEC application implementers: the <Image View On> message must
+be the first message you send, don't send any other messages before.
+Certain very bad but unfortunately not uncommon CEC implementations
+get very confused if they receive anything else but this message and
+they won't wake up.
+
+When writing a driver it can be tricky to test this. There are two
+ways to do this:
+
+1) Get a Pulse-Eight USB CEC dongle, connect an HDMI cable from your
+   device to the Pulse-Eight, but do not connect the Pulse-Eight to
+   the display.
+
+   Now configure the Pulse-Eight dongle::
+
+	cec-ctl -p0.0.0.0 --tv
+
+   and start monitoring::
+
+	sudo cec-ctl -M
+
+   On the device you are testing run::
+
+	cec-ctl --playback
+
+   It should report a physical address of f.f.f.f. Now run this
+   command::
+
+	cec-ctl -t0 --image-view-on
+
+   The Pulse-Eight should see the <Image View On> message. If not,
+   then something (hardware and/or software) is preventing the CEC
+   message from going out.
+
+   To make sure you have the wiring correct just connect the
+   Pulse-Eight to a CEC-enabled display and run the same command
+   on your device: now there is a HPD, so you should see the command
+   arriving at the Pulse-Eight.
+
+2) If you have another linux device supporting CEC without HPD, then
+   you can just connect your device to that device. Yes, you can connect
+   two HDMI outputs together. You won't have a HPD (which is what we
+   want for this test), but the second device can monitor the CEC pin.
+
+   Otherwise use the same commands as in 1.
+
+If CEC messages do not come through when there is no HPD, then you
+need to figure out why. Typically it is either a hardware restriction
+or the software powers off the CEC core when the HPD goes low. The
+first cannot be corrected of course, the second will likely required
+driver changes.
+
+
+Microcontrollers & CEC
+======================
+
+We have seen some CEC implementations in displays that use a microcontroller
+to sample the bus. This does not have to be a problem, but some implementations
+have timing issues. This is hard to discover unless you can hook up a low-level
+CEC debugger (see the next section).
+
+You will see cases where the CEC transmitter holds the CEC line high or low for
+a longer time than is allowed. For directed messages this is not a problem since
+if that happens the message will not be Acked and it will be retransmitted.
+For broadcast messages no such mechanism exists.
+
+It's not clear what to do about this. It is probably wise to transmit some
+broadcast messages twice to reduce the chance of them being lost. Specifically
+<Standby> and <Active Source> are candidates for that.
+
+
+Making a CEC debugger
+=====================
+
+By using a Raspberry Pi 4B and some cheap components you can make
+your own low-level CEC debugger.
+
+The critical component is one of these HDMI female-female passthrough connectors
+(full soldering type 1):
+
+https://elabbay.myshopify.com/collections/camera/products/hdmi-af-af-v1a-hdmi-type-a-female-to-hdmi-type-a-female-pass-through-adapter-breakout-board?variant=45533926147
+
+The video quality is variable and certainly not enough to pass-through 4kp60
+(594 MHz) video. You might be able to support 4kp30, but more likely you will
+be limited to 1080p60 (148.5 MHz). But for CEC testing that is fine.
+
+You need a breadboard and some breadboard wires:
+
+http://www.dx.com/p/diy-40p-male-to-female-male-to-male-female-to-female-dupont-line-wire-3pcs-356089#.WYLOOXWGN7I
+
+If you want to monitor the HPD and/or 5V lines as well, then you need one of
+these 5V to 3.3V level shifters:
+
+https://www.adafruit.com/product/757
+
+(This is just where I got these components, there are many other places you
+can get similar things).
+
+The ground pin of the HDMI connector needs to be connected to a ground
+pin of the Raspberry Pi, of course.
+
+The CEC pin of the HDMI connector needs to be connected to these pins:
+GPIO 6 and GPIO 7. The optional HPD pin of the HDMI connector should
+be connected via the level shifter to these pins: GPIO 23 and GPIO 12.
+The optional 5V pin of the HDMI connector should be connected via the
+level shifter to these pins: GPIO 25 and GPIO 22. Monitoring the HPD and
+5V lines is not necessary, but it is helpful.
+
+This device tree addition in ``arch/arm/boot/dts/bcm2711-rpi-4-b.dts``
+will hook up the cec-gpio driver correctly::
+
+	cec@6 {
+		compatible = "cec-gpio";
+		cec-gpios = <&gpio 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		hpd-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+		v5-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+	};
+
+	cec@7 {
+		compatible = "cec-gpio";
+		cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		hpd-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+		v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+	};
+
+If you haven't hooked up the HPD and/or 5V lines, then just delete those
+lines.
+
+This dts change will enable two cec GPIO devices: I typically use one to
+send/receive CEC commands and the other to monitor. If you monitor using
+an unconfigured CEC adapter then it will use GPIO interrupts which makes
+monitoring very accurate.
+
+If you just want to monitor traffic, then a single instance is sufficient.
+The minimum configuration is one HDMI female-female passthrough connector
+and two female-female breadboard wires: one for connecting the HDMI ground
+pin to a ground pin on the Raspberry Pi, and the other to connect the HDMI
+CEC pin to GPIO 6 on the Raspberry Pi.
+
+The documentation on how to use the error injection is here: :ref:`cec_pin_error_inj`.
+
+``cec-ctl --monitor-pin`` will do low-level CEC bus sniffing and analysis.
+You can also store the CEC traffic to file using ``--store-pin`` and analyze
+it later using ``--analyze-pin``.
+
+You can also use this as a full-fledged CEC device by configuring it
+using ``cec-ctl --tv -p0.0.0.0`` or ``cec-ctl --playback -p1.0.0.0``.
diff --git a/Documentation/admin-guide/media/cpia2.rst b/Documentation/admin-guide/media/cpia2.rst
deleted file mode 100644
index f6ffef686462..000000000000
--- a/Documentation/admin-guide/media/cpia2.rst
+++ /dev/null
@@ -1,145 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The cpia2 driver
-================
-
-Authors: Peter Pregler <Peter_Pregler@email.com>,
-Scott J. Bertin <scottbertin@yahoo.com>, and
-Jarl Totland <Jarl.Totland@bdc.no> for the original cpia driver, which
-this one was modelled from.
-
-Introduction
-------------
-
-This is a driver for STMicroelectronics's CPiA2 (second generation
-Colour Processor Interface ASIC) based cameras. This camera outputs an MJPEG
-stream at up to vga size. It implements the Video4Linux interface as much as
-possible.  Since the V4L interface does not support compressed formats, only
-an mjpeg enabled application can be used with the camera. We have modified the
-gqcam application to view this stream.
-
-The driver is implemented as two kernel modules. The cpia2 module
-contains the camera functions and the V4L interface.  The cpia2_usb module
-contains usb specific functions.  The main reason for this was the size of the
-module was getting out of hand, so I separated them.  It is not likely that
-there will be a parallel port version.
-
-Features
---------
-
-- Supports cameras with the Vision stv6410 (CIF) and stv6500 (VGA) cmos
-  sensors. I only have the vga sensor, so can't test the other.
-- Image formats: VGA, QVGA, CIF, QCIF, and a number of sizes in between.
-  VGA and QVGA are the native image sizes for the VGA camera. CIF is done
-  in the coprocessor by scaling QVGA.  All other sizes are done by clipping.
-- Palette: YCrCb, compressed with MJPEG.
-- Some compression parameters are settable.
-- Sensor framerate is adjustable (up to 30 fps CIF, 15 fps VGA).
-- Adjust brightness, color, contrast while streaming.
-- Flicker control settable for 50 or 60 Hz mains frequency.
-
-Making and installing the stv672 driver modules
------------------------------------------------
-
-Requirements
-~~~~~~~~~~~~
-
-Video4Linux must be either compiled into the kernel or
-available as a module.  Video4Linux2 is automatically detected and made
-available at compile time.
-
-Setup
-~~~~~
-
-Use ``modprobe cpia2`` to load and ``modprobe -r cpia2`` to unload. This
-may be done automatically by your distribution.
-
-Driver options
-~~~~~~~~~~~~~~
-
-.. tabularcolumns:: |p{13ex}|L|
-
-
-==============  ========================================================
-Option		Description
-==============  ========================================================
-video_nr	video device to register (0=/dev/video0, etc)
-		range -1 to 64.  default is -1 (first available)
-		If you have more than 1 camera, this MUST be -1.
-buffer_size	Size for each frame buffer in bytes (default 68k)
-num_buffers	Number of frame buffers (1-32, default 3)
-alternate	USB Alternate (2-7, default 7)
-flicker_freq	Frequency for flicker reduction(50 or 60, default 60)
-flicker_mode	0 to disable, or 1 to enable flicker reduction.
-		(default 0). This is only effective if the camera
-		uses a stv0672 coprocessor.
-==============  ========================================================
-
-Setting the options
-~~~~~~~~~~~~~~~~~~~
-
-If you are using modules, edit /etc/modules.conf and add an options
-line like this::
-
-	options cpia2 num_buffers=3 buffer_size=65535
-
-If the driver is compiled into the kernel, at boot time specify them
-like this::
-
-	cpia2.num_buffers=3 cpia2.buffer_size=65535
-
-What buffer size should I use?
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-The maximum image size depends on the alternate you choose, and the
-frame rate achieved by the camera.  If the compression engine is able to
-keep up with the frame rate, the maximum image size is given by the table
-below.
-
-The compression engine starts out at maximum compression, and will
-increase image quality until it is close to the size in the table.  As long
-as the compression engine can keep up with the frame rate, after a short time
-the images will all be about the size in the table, regardless of resolution.
-
-At low alternate settings, the compression engine may not be able to
-compress the image enough and will reduce the frame rate by producing larger
-images.
-
-The default of 68k should be good for most users.  This will handle
-any alternate at frame rates down to 15fps.  For lower frame rates, it may
-be necessary to increase the buffer size to avoid having frames dropped due
-to insufficient space.
-
-========== ========== ======== =====
-Alternate  bytes/ms   15fps    30fps
-========== ========== ======== =====
-    2         128      8533     4267
-    3         384     25600    12800
-    4         640     42667    21333
-    5         768     51200    25600
-    6         896     59733    29867
-    7        1023     68200    34100
-========== ========== ======== =====
-
-Table: Image size(bytes)
-
-
-How many buffers should I use?
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-For normal streaming, 3 should give the best results.  With only 2,
-it is possible for the camera to finish sending one image just after a
-program has started reading the other.  If this happens, the driver must drop
-a frame.  The exception to this is if you have a heavily loaded machine.  In
-this case use 2 buffers.  You are probably not reading at the full frame rate.
-If the camera can send multiple images before a read finishes, it could
-overwrite the third buffer before the read finishes, leading to a corrupt
-image.  Single and double buffering have extra checks to avoid overwriting.
-
-Using the camera
-~~~~~~~~~~~~~~~~
-
-We are providing a modified gqcam application to view the output. In
-order to avoid confusion, here it is called mview.  There is also the qx5view
-program which can also control the lights on the qx5 microscope. MJPEG Tools
-(http://mjpeg.sourceforge.net) can also be used to record from the camera.
diff --git a/Documentation/admin-guide/media/davinci-vpbe.rst b/Documentation/admin-guide/media/davinci-vpbe.rst
deleted file mode 100644
index 9e6360fd02db..000000000000
--- a/Documentation/admin-guide/media/davinci-vpbe.rst
+++ /dev/null
@@ -1,65 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The VPBE V4L2 driver design
-===========================
-
-Functional partitioning
------------------------
-
-Consists of the following:
-
- 1. V4L2 display driver
-
-    Implements creation of video2 and video3 device nodes and
-    provides v4l2 device interface to manage VID0 and VID1 layers.
-
- 2. Display controller
-
-    Loads up VENC, OSD and external encoders such as ths8200. It provides
-    a set of API calls to V4L2 drivers to set the output/standards
-    in the VENC or external sub devices. It also provides
-    a device object to access the services from OSD subdevice
-    using sub device ops. The connection of external encoders to VENC LCD
-    controller port is done at init time based on default output and standard
-    selection or at run time when application change the output through
-    V4L2 IOCTLs.
-
-    When connected to an external encoder, vpbe controller is also responsible
-    for setting up the interface between VENC and external encoders based on
-    board specific settings (specified in board-xxx-evm.c). This allows
-    interfacing external encoders such as ths8200. The setup_if_config()
-    is implemented for this as well as configure_venc() (part of the next patch)
-    API to set timings in VENC for a specific display resolution. As of this
-    patch series, the interconnection and enabling and setting of the external
-    encoders is not present, and would be a part of the next patch series.
-
- 3. VENC subdevice module
-
-    Responsible for setting outputs provided through internal DACs and also
-    setting timings at LCD controller port when external encoders are connected
-    at the port or LCD panel timings required. When external encoder/LCD panel
-    is connected, the timings for a specific standard/preset is retrieved from
-    the board specific table and the values are used to set the timings in
-    venc using non-standard timing mode.
-
-    Support LCD Panel displays using the VENC. For example to support a Logic
-    PD display, it requires setting up the LCD controller port with a set of
-    timings for the resolution supported and setting the dot clock. So we could
-    add the available outputs as a board specific entry (i.e add the "LogicPD"
-    output name to board-xxx-evm.c). A table of timings for various LCDs
-    supported can be maintained in the board specific setup file to support
-    various LCD displays.As of this patch a basic driver is present, and this
-    support for external encoders and displays forms a part of the next
-    patch series.
-
- 4. OSD module
-
-    OSD module implements all OSD layer management and hardware specific
-    features. The VPBE module interacts with the OSD for enabling and
-    disabling appropriate features of the OSD.
-
-Current status
---------------
-
-A fully functional working version of the V4L2 driver is available. This
-driver has been tested with NTSC and PAL standards and buffer streaming.
diff --git a/Documentation/admin-guide/media/dvb-drivers.rst b/Documentation/admin-guide/media/dvb-drivers.rst
index 8df637c375f9..66fa4edd0606 100644
--- a/Documentation/admin-guide/media/dvb-drivers.rst
+++ b/Documentation/admin-guide/media/dvb-drivers.rst
@@ -13,4 +13,3 @@ Digital TV driver-specific documentation
 	opera-firmware
 	technisat
 	ttusb-dec
-	zr364xx
diff --git a/Documentation/admin-guide/media/fimc.rst b/Documentation/admin-guide/media/fimc.rst
index 56b149d9a527..267ef52fe387 100644
--- a/Documentation/admin-guide/media/fimc.rst
+++ b/Documentation/admin-guide/media/fimc.rst
@@ -14,7 +14,7 @@ data from LCD controller (FIMD) through the SoC internal writeback data
 path.  There are multiple FIMC instances in the SoCs (up to 4), having
 slightly different capabilities, like pixel alignment constraints, rotator
 availability, LCD writeback support, etc. The driver is located at
-drivers/media/platform/exynos4-is directory.
+drivers/media/platform/samsung/exynos4-is directory.
 
 Supported SoCs
 --------------
diff --git a/Documentation/admin-guide/media/i2c-cardlist.rst b/Documentation/admin-guide/media/i2c-cardlist.rst
index e60d459d18a9..1825a0bb47bd 100644
--- a/Documentation/admin-guide/media/i2c-cardlist.rst
+++ b/Documentation/admin-guide/media/i2c-cardlist.rst
@@ -58,27 +58,29 @@ Camera sensor devices
 ============  ==========================================================
 Driver        Name
 ============  ==========================================================
+ccs           MIPI CCS compliant camera sensors (also SMIA++ and SMIA)
 et8ek8        ET8EK8 camera sensor
 hi556         Hynix Hi-556 sensor
+hi846         Hynix Hi-846 sensor
+imx208        Sony IMX208 sensor
 imx214        Sony IMX214 sensor
 imx219        Sony IMX219 sensor
 imx258        Sony IMX258 sensor
 imx274        Sony IMX274 sensor
 imx290        Sony IMX290 sensor
 imx319        Sony IMX319 sensor
+imx334        Sony IMX334 sensor
 imx355        Sony IMX355 sensor
-m5mols        Fujitsu M-5MOLS 8MP sensor
+imx412        Sony IMX412 sensor
 mt9m001       mt9m001
-mt9m032       MT9M032 camera sensor
 mt9m111       mt9m111, mt9m112 and mt9m131
 mt9p031       Aptina MT9P031
-mt9t001       Aptina MT9T001
 mt9t112       Aptina MT9T111/MT9T112
 mt9v011       Micron mt9v011 sensor
 mt9v032       Micron MT9V032 sensor
 mt9v111       Aptina MT9V111 sensor
-noon010pc30   Siliconfile NOON010PC30 sensor
 ov13858       OmniVision OV13858 sensor
+ov13b10       OmniVision OV13B10 sensor
 ov2640        OmniVision OV2640 sensor
 ov2659        OmniVision OV2659 sensor
 ov2680        OmniVision OV2680 sensor
@@ -103,10 +105,6 @@ s5c73m3       Samsung S5C73M3 sensor
 s5k4ecgx      Samsung S5K4ECGX sensor
 s5k5baf       Samsung S5K5BAF sensor
 s5k6a3        Samsung S5K6A3 sensor
-s5k6aa        Samsung S5K6AAFX sensor
-smiapp        SMIA++/SMIA sensor
-sr030pc30     Siliconfile SR030PC30 sensor
-vs6624        ST VS6624 sensor
 ============  ==========================================================
 
 Flash devices
@@ -138,6 +136,7 @@ Driver        Name
 ad5820        AD5820 lens voice coil
 ak7375        AK7375 lens voice coil
 dw9714        DW9714 lens voice coil
+dw9768        DW9768 lens voice coil
 dw9807-vcm    DW9807 lens voice coil
 ============  ==========================================================
 
@@ -216,7 +215,6 @@ Video encoders
 ============  ==========================================================
 Driver        Name
 ============  ==========================================================
-ad9389b       Analog Devices AD9389B encoder
 adv7170       Analog Devices ADV7170 video encoder
 adv7175       Analog Devices ADV7175 video encoder
 adv7343       ADV7343 video encoder
@@ -278,7 +276,7 @@ tda9887       TDA 9885/6/7 analog IF demodulator
 tea5761       TEA 5761 radio tuner
 tea5767       TEA 5767 radio tuner
 tua9001       Infineon TUA9001 silicon tuner
-tuner-xc2028  XCeive xc2028/xc3028 tuners
+xc2028        XCeive xc2028/xc3028 tuners
 xc4000        Xceive XC4000 silicon tuner
 xc5000        Xceive XC5000 silicon tuner
 ============  ==================================================
diff --git a/Documentation/admin-guide/media/imx7.rst b/Documentation/admin-guide/media/imx7.rst
index 1e442c97da47..2fa27718f52a 100644
--- a/Documentation/admin-guide/media/imx7.rst
+++ b/Documentation/admin-guide/media/imx7.rst
@@ -33,7 +33,7 @@ reference manual [#f1]_.
 Entities
 --------
 
-imx7-mipi-csi2
+imx-mipi-csi2
 --------------
 
 This is the MIPI CSI-2 receiver entity. It has one sink pad to receive the pixel
@@ -155,6 +155,66 @@ the resolutions supported by the sensor.
 	                [fmt:SBGGR10_1X10/800x600@1/30 field:none colorspace:srgb]
 	                -> "imx7-mipi-csis.0":0 [ENABLED]
 
+i.MX6ULL-EVK with OV5640
+------------------------
+
+On this platform a parallel OV5640 sensor is connected to the CSI port.
+The following example configures a video capture pipeline with an output
+of 640x480 and UYVY8_2X8 format:
+
+.. code-block:: none
+
+   # Setup links
+   media-ctl -l "'ov5640 1-003c':0 -> 'csi':0[1]"
+   media-ctl -l "'csi':1 -> 'csi capture':0[1]"
+
+   # Configure pads for pipeline
+   media-ctl -v -V "'ov5640 1-003c':0 [fmt:UYVY8_2X8/640x480 field:none]"
+
+After this streaming can start:
+
+.. code-block:: none
+
+   gst-launch-1.0 -v v4l2src device=/dev/video1 ! video/x-raw,format=UYVY,width=640,height=480 ! v4l2convert ! fbdevsink
+
+.. code-block:: none
+
+	# media-ctl -p
+	Media controller API version 5.14.0
+
+	Media device information
+	------------------------
+	driver          imx7-csi
+	model           imx-media
+	serial
+	bus info
+	hw revision     0x0
+	driver version  5.14.0
+
+	Device topology
+	- entity 1: csi (2 pads, 2 links)
+	            type V4L2 subdev subtype Unknown flags 0
+	            device node name /dev/v4l-subdev0
+	        pad0: Sink
+	                [fmt:UYVY8_2X8/640x480 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range]
+	                <- "ov5640 1-003c":0 [ENABLED,IMMUTABLE]
+	        pad1: Source
+	                [fmt:UYVY8_2X8/640x480 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range]
+	                -> "csi capture":0 [ENABLED,IMMUTABLE]
+
+	- entity 4: csi capture (1 pad, 1 link)
+	            type Node subtype V4L flags 0
+	            device node name /dev/video1
+	        pad0: Sink
+	                <- "csi":1 [ENABLED,IMMUTABLE]
+
+	- entity 10: ov5640 1-003c (1 pad, 1 link)
+	             type V4L2 subdev subtype Sensor flags 0
+	             device node name /dev/v4l-subdev1
+	        pad0: Source
+	                [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:full-range]
+	                -> "csi":0 [ENABLED,IMMUTABLE]
+
 References
 ----------
 
diff --git a/Documentation/admin-guide/media/index.rst b/Documentation/admin-guide/media/index.rst
index c676af665111..43f4a292b245 100644
--- a/Documentation/admin-guide/media/index.rst
+++ b/Documentation/admin-guide/media/index.rst
@@ -38,13 +38,14 @@ The media subsystem
 
 	remote-controller
 
+	cec
+
 	dvb
 
 	cardlist
 
 	v4l-drivers
 	dvb-drivers
-	cec-drivers
 
 **Copyright** |copy| 1999-2020 : LinuxTV Developers
 
diff --git a/Documentation/admin-guide/media/ipu3.rst b/Documentation/admin-guide/media/ipu3.rst
index 52c1c04173da..83b3cd03b35c 100644
--- a/Documentation/admin-guide/media/ipu3.rst
+++ b/Documentation/admin-guide/media/ipu3.rst
@@ -51,10 +51,11 @@ to userspace as a V4L2 sub-device node and has two pads:
 .. tabularcolumns:: |p{0.8cm}|p{4.0cm}|p{4.0cm}|
 
 .. flat-table::
+    :header-rows: 1
 
-    * - pad
-      - direction
-      - purpose
+    * - Pad
+      - Direction
+      - Purpose
 
     * - 0
       - sink
@@ -148,10 +149,11 @@ Each pipe has two sink pads and three source pads for the following purpose:
 .. tabularcolumns:: |p{0.8cm}|p{4.0cm}|p{4.0cm}|
 
 .. flat-table::
+    :header-rows: 1
 
-    * - pad
-      - direction
-      - purpose
+    * - Pad
+      - Direction
+      - Purpose
 
     * - 0
       - sink
diff --git a/Documentation/admin-guide/media/ivtv.rst b/Documentation/admin-guide/media/ivtv.rst
index 7b8775d20214..101f16d0263e 100644
--- a/Documentation/admin-guide/media/ivtv.rst
+++ b/Documentation/admin-guide/media/ivtv.rst
@@ -159,7 +159,7 @@ whatever). Otherwise the device numbers can get confusing. The ivtv
   Read-only
 
   The raw YUV video output from the current video input. The YUV format
-  is non-standard (V4L2_PIX_FMT_HM12).
+  is a 16x16 linear tiled NV12 format (V4L2_PIX_FMT_NV12_16L16)
 
   Note that the YUV and PCM streams are not synchronized, so they are of
   limited use.
diff --git a/Documentation/admin-guide/media/meye.rst b/Documentation/admin-guide/media/meye.rst
deleted file mode 100644
index 9098a1e65f8b..000000000000
--- a/Documentation/admin-guide/media/meye.rst
+++ /dev/null
@@ -1,93 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-Vaio Picturebook Motion Eye Camera Driver
-=========================================
-
-Copyright |copy| 2001-2004 Stelian Pop <stelian@popies.net>
-
-Copyright |copy| 2001-2002 Alcôve <www.alcove.com>
-
-Copyright |copy| 2000 Andrew Tridgell <tridge@samba.org>
-
-This driver enable the use of video4linux compatible applications with the
-Motion Eye camera. This driver requires the "Sony Laptop Extras" driver (which
-can be found in the "Misc devices" section of the kernel configuration utility)
-to be compiled and installed (using its "camera=1" parameter).
-
-It can do at maximum 30 fps @ 320x240 or 15 fps @ 640x480.
-
-Grabbing is supported in packed YUV colorspace only.
-
-MJPEG hardware grabbing is supported via a private API (see below).
-
-Hardware supported
-------------------
-
-This driver supports the 'second' version of the MotionEye camera :)
-
-The first version was connected directly on the video bus of the Neomagic
-video card and is unsupported.
-
-The second one, made by Kawasaki Steel is fully supported by this
-driver (PCI vendor/device is 0x136b/0xff01)
-
-The third one, present in recent (more or less last year) Picturebooks
-(C1M* models), is not supported. The manufacturer has given the specs
-to the developers under a NDA (which allows the development of a GPL
-driver however), but things are not moving very fast (see
-http://r-engine.sourceforge.net/) (PCI vendor/device is 0x10cf/0x2011).
-
-There is a forth model connected on the USB bus in TR1* Vaio laptops.
-This camera is not supported at all by the current driver, in fact
-little information if any is available for this camera
-(USB vendor/device is 0x054c/0x0107).
-
-Driver options
---------------
-
-Several options can be passed to the meye driver using the standard
-module argument syntax (<param>=<value> when passing the option to the
-module or meye.<param>=<value> on the kernel boot line when meye is
-statically linked into the kernel). Those options are:
-
-.. code-block:: none
-
-	gbuffers:	number of capture buffers, default is 2 (32 max)
-
-	gbufsize:	size of each capture buffer, default is 614400
-
-	video_nr:	video device to register (0 = /dev/video0, etc)
-
-Module use
-----------
-
-In order to automatically load the meye module on use, you can put those lines
-in your /etc/modprobe.d/meye.conf file:
-
-.. code-block:: none
-
-	alias char-major-81 videodev
-	alias char-major-81-0 meye
-	options meye gbuffers=32
-
-Usage:
-------
-
-.. code-block:: none
-
-	xawtv >= 3.49 (<http://bytesex.org/xawtv/>)
-		for display and uncompressed video capture:
-
-			xawtv -c /dev/video0 -geometry 640x480
-				or
-			xawtv -c /dev/video0 -geometry 320x240
-
-	motioneye (<http://popies.net/meye/>)
-		for getting ppm or jpg snapshots, mjpeg video
-
-Bugs / Todo
------------
-
-- 'motioneye' still uses the meye private v4l1 API extensions.
diff --git a/Documentation/admin-guide/media/omap3isp.rst b/Documentation/admin-guide/media/omap3isp.rst
index bc447bbec7ce..f32e7375a1a2 100644
--- a/Documentation/admin-guide/media/omap3isp.rst
+++ b/Documentation/admin-guide/media/omap3isp.rst
@@ -17,7 +17,7 @@ Introduction
 ------------
 
 This file documents the Texas Instruments OMAP 3 Image Signal Processor (ISP)
-driver located under drivers/media/platform/omap3isp. The original driver was
+driver located under drivers/media/platform/ti/omap3isp. The original driver was
 written by Texas Instruments but since that it has been rewritten (twice) at
 Nokia.
 
diff --git a/Documentation/admin-guide/media/omap4_camera.rst b/Documentation/admin-guide/media/omap4_camera.rst
index 24db4222d36d..2ada9b1e6897 100644
--- a/Documentation/admin-guide/media/omap4_camera.rst
+++ b/Documentation/admin-guide/media/omap4_camera.rst
@@ -25,7 +25,7 @@ As of Revision AB, the ISS is described in detail in section 8.
 This driver is supporting **only** the CSI2-A/B interfaces for now.
 
 It makes use of the Media Controller framework [#f2]_, and inherited most of the
-code from OMAP3 ISP driver (found under drivers/media/platform/omap3isp/\*),
+code from OMAP3 ISP driver (found under drivers/media/platform/ti/omap3isp/\*),
 except that it doesn't need an IOMMU now for ISS buffers memory mapping.
 
 Supports usage of MMAP buffers only (for now).
diff --git a/Documentation/admin-guide/media/other-usb-cardlist.rst b/Documentation/admin-guide/media/other-usb-cardlist.rst
index bbfdb1389c18..fb88db50e861 100644
--- a/Documentation/admin-guide/media/other-usb-cardlist.rst
+++ b/Documentation/admin-guide/media/other-usb-cardlist.rst
@@ -14,8 +14,6 @@ dvb-as102	  nBox DVB-T Dongle			  0b89:0007
 dvb-as102	  Sky IT Digital Key (green led)	  2137:0001
 b2c2-flexcop-usb  Technisat/B2C2 FlexCop II/IIb/III	  0af7:0101
 		  Digital TV
-cpia2		  Vision's CPiA2 cameras		  0553:0100, 0553:0140,
-		  such as the Digital Blue QX5		  0553:0151
 go7007		  WIS GO7007 MPEG encoder		  1943:a250, 093b:a002,
 							  093b:a004, 0eb1:6666,
 							  0eb1:6668
@@ -66,7 +64,6 @@ pwc		  Visionite VCS-UC300			  0d81:1900
 pwc		  Visionite VCS-UM100			  0d81:1910
 s2255drv	  Sensoray 2255				  1943:2255, 1943:2257
 stk1160		  STK1160 USB video capture dongle	  05e1:0408
-stkwebcam	  Syntek DC1125				  174f:a311, 05e1:0501
 dvb-ttusb-budget  Technotrend/Hauppauge Nova-USB devices  0b48:1003, 0b48:1004,
 							  0b48:1005
 dvb-ttusb_dec	  Technotrend/Hauppauge MPEG decoder	  0b48:1006
@@ -78,15 +75,4 @@ dvb-ttusb_dec	  Technotrend/Hauppauge MPEG decoder
 		  DEC2540-t				  0b48:1009
 usbtv		  Fushicai USBTV007 Audio-Video Grabber	  1b71:3002, 1f71:3301,
 							  1f71:3306
-zr364xx		  USB ZR364XX Camera			  08ca:0109, 041e:4024,
-							  0d64:0108, 0546:3187,
-							  0d64:3108, 0595:4343,
-							  0bb0:500d, 0feb:2004,
-							  055f:b500, 08ca:2062,
-							  052b:1a18, 04c8:0729,
-							  04f2:a208, 0784:0040,
-							  06d6:0034, 0a17:0062,
-							  06d6:003b, 0a17:004e,
-							  041e:405d, 08ca:2102,
-							  06d6:003d
 ================  ======================================  =====================
diff --git a/Documentation/admin-guide/media/pci-cardlist.rst b/Documentation/admin-guide/media/pci-cardlist.rst
index f4d670e632f8..42528795d4da 100644
--- a/Documentation/admin-guide/media/pci-cardlist.rst
+++ b/Documentation/admin-guide/media/pci-cardlist.rst
@@ -77,7 +77,6 @@ ipu3-cio2         Intel ipu3-cio2 driver
 ivtv              Conexant cx23416/cx23415 MPEG encoder/decoder
 ivtvfb            Conexant cx23415 framebuffer
 mantis            MANTIS based cards
-meye              Sony Vaio Picturebook Motion Eye
 mxb               Siemens-Nixdorf 'Multimedia eXtension Board'
 netup-unidvb      NetUP Universal DVB card
 ngene             Micronas nGene
diff --git a/Documentation/admin-guide/media/platform-cardlist.rst b/Documentation/admin-guide/media/platform-cardlist.rst
index 261e7772eb3e..1230ae4037ad 100644
--- a/Documentation/admin-guide/media/platform-cardlist.rst
+++ b/Documentation/admin-guide/media/platform-cardlist.rst
@@ -30,7 +30,6 @@ exynos-fimc-is     EXYNOS4x12 FIMC-IS (Imaging Subsystem)
 exynos-fimc-lite   EXYNOS FIMC-LITE camera interface
 exynos-gsc         Samsung Exynos G-Scaler
 exy                Samsung S5P/EXYNOS4 SoC series Camera Subsystem
-fsl-viu            Freescale VIU
 imx-pxp            i.MX Pixel Pipeline (PXP)
 isdf               TI DM365 ISIF video capture
 mmp_camera         Marvell Armada 610 integrated camera controller
@@ -60,6 +59,7 @@ s5p-mfc            Samsung S5P MFC Video Codec
 sh_veu             SuperH VEU mem2mem video processing
 sh_vou             SuperH VOU video output
 stm32-dcmi         STM32 Digital Camera Memory Interface (DCMI)
+stm32-dma2d        STM32 Chrom-Art Accelerator Unit
 sun4i-csi          Allwinner A10 CMOS Sensor Interface Support
 sun6i-csi          Allwinner V3s Camera Sensor Interface
 sun8i-di           Allwinner Deinterlace
@@ -72,7 +72,6 @@ via-camera         VIAFB camera controller
 video-mux          Video Multiplexer
 vpif_display       TI DaVinci VPIF V4L2-Display
 vpif_capture       TI DaVinci VPIF video capture
-vpss               TI DaVinci VPBE V4L2-Display
 vsp1               Renesas VSP1 Video Processing Engine
 xilinx-tpg         Xilinx Video Test Pattern Generator
 xilinx-video       Xilinx Video IP (EXPERIMENTAL)
diff --git a/Documentation/admin-guide/media/pulse8-cec.rst b/Documentation/admin-guide/media/pulse8-cec.rst
deleted file mode 100644
index 356d08b519f3..000000000000
--- a/Documentation/admin-guide/media/pulse8-cec.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Pulse-Eight CEC Adapter driver
-==============================
-
-The pulse8-cec driver implements the following module option:
-
-``persistent_config``
----------------------
-
-By default this is off, but when set to 1 the driver will store the current
-settings to the device's internal eeprom and restore it the next time the
-device is connected to the USB port.
diff --git a/Documentation/admin-guide/media/si476x.rst b/Documentation/admin-guide/media/si476x.rst
index 87062301d6a1..c8882ee9f208 100644
--- a/Documentation/admin-guide/media/si476x.rst
+++ b/Documentation/admin-guide/media/si476x.rst
@@ -142,7 +142,7 @@ The drivers exposes following files:
 				  indicator
   0x18		 lassi		  Signed Low side adjacent Channel
 				  Strength indicator
-  0x19		 hassi		  ditto fpr High side
+  0x19		 hassi		  ditto for High side
   0x20		 mult		  Multipath indicator
   0x21		 dev		  Frequency deviation
   0x24		 assi		  Adjacent channel SSI
diff --git a/Documentation/admin-guide/media/tm6000-cardlist.rst b/Documentation/admin-guide/media/tm6000-cardlist.rst
deleted file mode 100644
index 6d2769c0f4d8..000000000000
--- a/Documentation/admin-guide/media/tm6000-cardlist.rst
+++ /dev/null
@@ -1,83 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-TM6000 cards list
-=================
-
-.. tabularcolumns:: |p{1.4cm}|p{11.1cm}|p{4.2cm}|
-
-.. flat-table::
-   :header-rows: 1
-   :widths: 2 19 18
-   :stub-columns: 0
-
-   * - Card number
-     - Card name
-     - USB IDs
-
-   * - 0
-     - Unknown tm6000 video grabber
-     -
-
-   * - 1
-     - Generic tm5600 board
-     - 6000:0001
-
-   * - 2
-     - Generic tm6000 board
-     -
-
-   * - 3
-     - Generic tm6010 board
-     - 6000:0002
-
-   * - 4
-     - 10Moons UT 821
-     -
-
-   * - 5
-     - 10Moons UT 330
-     -
-
-   * - 6
-     - ADSTECH Dual TV USB
-     - 06e1:f332
-
-   * - 7
-     - Freecom Hybrid Stick / Moka DVB-T Receiver Dual
-     - 14aa:0620
-
-   * - 8
-     - ADSTECH Mini Dual TV USB
-     - 06e1:b339
-
-   * - 9
-     - Hauppauge WinTV HVR-900H / WinTV USB2-Stick
-     - 2040:6600, 2040:6601, 2040:6610, 2040:6611
-
-   * - 10
-     - Beholder Wander DVB-T/TV/FM USB2.0
-     - 6000:dec0
-
-   * - 11
-     - Beholder Voyager TV/FM USB2.0
-     - 6000:dec1
-
-   * - 12
-     - Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick
-     - 0ccd:0086, 0ccd:00A5
-
-   * - 13
-     - Twinhan TU501(704D1)
-     - 13d3:3240, 13d3:3241, 13d3:3243, 13d3:3264
-
-   * - 14
-     - Beholder Wander Lite DVB-T/TV/FM USB2.0
-     - 6000:dec2
-
-   * - 15
-     - Beholder Voyager Lite TV/FM USB2.0
-     - 6000:dec3
-
-   * - 16
-     - Terratec Grabster AV 150/250 MX
-     - 0ccd:0079
diff --git a/Documentation/admin-guide/media/usb-cardlist.rst b/Documentation/admin-guide/media/usb-cardlist.rst
index 1e96f928e0af..5f5ab0723e48 100644
--- a/Documentation/admin-guide/media/usb-cardlist.rst
+++ b/Documentation/admin-guide/media/usb-cardlist.rst
@@ -43,7 +43,6 @@ Driver                  Name
 airspy                  AirSpy
 au0828                  Auvitek AU0828
 b2c2-flexcop-usb        Technisat/B2C2 Air/Sky/Cable2PC USB
-cpia2                   CPiA2 Video For Linux
 cx231xx                 Conexant cx231xx USB video capture
 dvb-as102               Abilis AS102 DVB receiver
 dvb-ttusb-budget        Technotrend/Hauppauge Nova - USB devices
@@ -93,15 +92,10 @@ pwc                     USB Philips Cameras
 s2250                   Sensoray 2250/2251
 s2255drv                USB Sensoray 2255 video capture device
 smsusb                  Siano SMS1xxx based MDTV receiver
-stkwebcam               USB Syntek DC1125 Camera
-tm6000-alsa             TV Master TM5600/6000/6010 audio
-tm6000-dvb              DVB Support for tm6000 based TV cards
-tm6000                  TV Master TM5600/6000/6010 driver
 ttusb_dec               Technotrend/Hauppauge USB DEC devices
 usbtv                   USBTV007 video capture
 uvcvideo                USB Video Class (UVC)
 zd1301                  ZyDAS ZD1301
-zr364xx                 USB ZR364XX Camera
 ======================  =========================================================
 
 .. toctree::
@@ -110,7 +104,6 @@ zr364xx                 USB ZR364XX Camera
 	au0828-cardlist
 	cx231xx-cardlist
 	em28xx-cardlist
-	tm6000-cardlist
 	siano-cardlist
 
 	gspca-cardlist
diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst
index 9c7ebe2ca3bd..1c41f87c3917 100644
--- a/Documentation/admin-guide/media/v4l-drivers.rst
+++ b/Documentation/admin-guide/media/v4l-drivers.rst
@@ -11,15 +11,12 @@ Video4Linux (V4L) driver-specific documentation
 
 	bttv
 	cafe_ccic
-	cpia2
 	cx88
-	davinci-vpbe
 	fimc
 	imx
 	imx7
 	ipu3
 	ivtv
-	meye
 	omap3isp
 	omap4_camera
 	philips
@@ -31,4 +28,5 @@ Video4Linux (V4L) driver-specific documentation
 	si4713
 	si476x
 	vimc
+	visl
 	vivid
diff --git a/Documentation/admin-guide/media/vimc.dot b/Documentation/admin-guide/media/vimc.dot
index 57863a13fa39..92a5bb631235 100644
--- a/Documentation/admin-guide/media/vimc.dot
+++ b/Documentation/admin-guide/media/vimc.dot
@@ -5,18 +5,22 @@ digraph board {
 	n00000001 [label="{{} | Sensor A\n/dev/v4l-subdev0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
 	n00000001:port0 -> n00000005:port0 [style=bold]
 	n00000001:port0 -> n0000000b [style=bold]
+	n00000001 -> n00000002
+	n00000002 [label="{{} | Lens A\n/dev/v4l-subdev5 | {<port0>}}", shape=Mrecord, style=filled, fillcolor=green]
 	n00000003 [label="{{} | Sensor B\n/dev/v4l-subdev1 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
 	n00000003:port0 -> n00000008:port0 [style=bold]
 	n00000003:port0 -> n0000000f [style=bold]
+	n00000003 -> n00000004
+	n00000004 [label="{{} | Lens B\n/dev/v4l-subdev6 | {<port0>}}", shape=Mrecord, style=filled, fillcolor=green]
 	n00000005 [label="{{<port0> 0} | Debayer A\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000005:port1 -> n00000017:port0
+	n00000005:port1 -> n00000015:port0
 	n00000008 [label="{{<port0> 0} | Debayer B\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000008:port1 -> n00000017:port0 [style=dashed]
+	n00000008:port1 -> n00000015:port0 [style=dashed]
 	n0000000b [label="Raw Capture 0\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
 	n0000000f [label="Raw Capture 1\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
-	n00000013 [label="RGB/YUV Input\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
-	n00000013 -> n00000017:port0 [style=dashed]
-	n00000017 [label="{{<port0> 0} | Scaler\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
-	n00000017:port1 -> n0000001a [style=bold]
-	n0000001a [label="RGB/YUV Capture\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
+	n00000013 [label="{{} | RGB/YUV Input\n/dev/v4l-subdev4 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000013:port0 -> n00000015:port0 [style=dashed]
+	n00000015 [label="{{<port0> 0} | Scaler\n/dev/v4l-subdev5 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
+	n00000015:port1 -> n00000018 [style=bold]
+	n00000018 [label="RGB/YUV Capture\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
 }
diff --git a/Documentation/admin-guide/media/vimc.rst b/Documentation/admin-guide/media/vimc.rst
index 211cc8972410..29d843a8ddb1 100644
--- a/Documentation/admin-guide/media/vimc.rst
+++ b/Documentation/admin-guide/media/vimc.rst
@@ -35,11 +35,11 @@ of commands fits for the default topology:
 
         media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
         media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
-        media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]'
-        media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]'
-        v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440
+        media-ctl -d platform:vimc -V '"Scaler":0[fmt:RGB888_1X24/640x480]'
+        media-ctl -d platform:vimc -V '"Scaler":0[crop:(100,50)/400x150]'
+        media-ctl -d platform:vimc -V '"Scaler":1[fmt:RGB888_1X24/300x700]'
+        v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=300,height=700
         v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
-        v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81
 
 Subdevices
 ----------
@@ -53,6 +53,25 @@ vimc-sensor:
 
 	* 1 Pad source
 
+vimc-lens:
+	Ancillary lens for a sensor. Supports auto focus control. Linked to
+	a vimc-sensor using an ancillary link. The lens supports FOCUS_ABSOLUTE
+	control.
+
+.. code-block:: bash
+
+	media-ctl -p
+	...
+	- entity 28: Lens A (0 pad, 0 link)
+			type V4L2 subdev subtype Lens flags 0
+			device node name /dev/v4l-subdev6
+	- entity 29: Lens B (0 pad, 0 link)
+			type V4L2 subdev subtype Lens flags 0
+			device node name /dev/v4l-subdev7
+	v4l2-ctl -d /dev/v4l-subdev7 -C focus_absolute
+	focus_absolute: 0
+
+
 vimc-debayer:
 	Transforms images in bayer format into a non-bayer format.
 	Exposes:
@@ -61,9 +80,10 @@ vimc-debayer:
 	* 1 Pad source
 
 vimc-scaler:
-	Scale up the image by a factor of 3. E.g.: a 640x480 image becomes a
-        1920x1440 image. (this value can be configured, see at
-        `Module options`_).
+	Re-size the image to meet the source pad resolution. E.g.: if the sync
+	pad is configured to 360x480 and the source to 1280x720, the image will
+	be stretched to fit the source resolution. Works for any resolution
+	within the vimc limitations (even shrinking the image if necessary).
 	Exposes:
 
 	* 1 Pad sink
@@ -76,15 +96,15 @@ vimc-capture:
 	* 1 Pad sink
 	* 1 Pad source
 
-
 Module options
 --------------
 
 Vimc has a module parameter to configure the driver.
 
-* ``sca_mult=<unsigned int>``
+* ``allocator=<unsigned int>``
+
+	memory allocator selection, default is 0. It specifies the way buffers
+	will be allocated.
 
-        Image size multiplier factor to be used to multiply both width and
-        height, so the image size will be ``sca_mult^2`` bigger than the
-        original one. Currently, only supports scaling up (the default value
-        is 3).
+		- 0: vmalloc
+		- 1: dma-contig
diff --git a/Documentation/admin-guide/media/visl.rst b/Documentation/admin-guide/media/visl.rst
new file mode 100644
index 000000000000..7d2dc78341c9
--- /dev/null
+++ b/Documentation/admin-guide/media/visl.rst
@@ -0,0 +1,175 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The Virtual Stateless Decoder Driver (visl)
+===========================================
+
+A virtual stateless decoder device for stateless uAPI development
+purposes.
+
+This tool's objective is to help the development and testing of
+userspace applications that use the V4L2 stateless API to decode media.
+
+A userspace implementation can use visl to run a decoding loop even when
+no hardware is available or when the kernel uAPI for the codec has not
+been upstreamed yet. This can reveal bugs at an early stage.
+
+This driver can also trace the contents of the V4L2 controls submitted
+to it.  It can also dump the contents of the vb2 buffers through a
+debugfs interface. This is in many ways similar to the tracing
+infrastructure available for other popular encode/decode APIs out there
+and can help develop a userspace application by using another (working)
+one as a reference.
+
+.. note::
+
+        No actual decoding of video frames is performed by visl. The
+        V4L2 test pattern generator is used to write various debug information
+        to the capture buffers instead.
+
+Module parameters
+-----------------
+
+- visl_debug: Activates debug info, printing various debug messages through
+  dprintk. Also controls whether per-frame debug info is shown. Defaults to off.
+  Note that enabling this feature can result in slow performance through serial.
+
+- visl_transtime_ms: Simulated process time in milliseconds. Slowing down the
+  decoding speed can be useful for debugging.
+
+- visl_dprintk_frame_start, visl_dprintk_frame_nframes: Dictates a range of
+  frames where dprintk is activated. This only controls the dprintk tracing on a
+  per-frame basis. Note that printing a lot of data can be slow through serial.
+
+- keep_bitstream_buffers: Controls whether bitstream (i.e. OUTPUT) buffers are
+  kept after a decoding session. Defaults to false so as to reduce the amount of
+  clutter. keep_bitstream_buffers == false works well when live debugging the
+  client program with GDB.
+
+- bitstream_trace_frame_start, bitstream_trace_nframes: Similar to
+  visl_dprintk_frame_start, visl_dprintk_nframes, but controls the dumping of
+  buffer data through debugfs instead.
+
+What is the default use case for this driver?
+---------------------------------------------
+
+This driver can be used as a way to compare different userspace implementations.
+This assumes that a working client is run against visl and that the ftrace and
+OUTPUT buffer data is subsequently used to debug a work-in-progress
+implementation.
+
+Information on reference frames, their timestamps, the status of the OUTPUT and
+CAPTURE queues and more can be read directly from the CAPTURE buffers.
+
+Supported codecs
+----------------
+
+The following codecs are supported:
+
+- FWHT
+- MPEG2
+- VP8
+- VP9
+- H.264
+- HEVC
+
+visl trace events
+-----------------
+The trace events are defined on a per-codec basis, e.g.:
+
+.. code-block:: bash
+
+        $ ls /sys/kernel/debug/tracing/events/ | grep visl
+        visl_fwht_controls
+        visl_h264_controls
+        visl_hevc_controls
+        visl_mpeg2_controls
+        visl_vp8_controls
+        visl_vp9_controls
+
+For example, in order to dump HEVC SPS data:
+
+.. code-block:: bash
+
+        $ echo 1 >  /sys/kernel/debug/tracing/events/visl_hevc_controls/v4l2_ctrl_hevc_sps/enable
+
+The SPS data will be dumped to the trace buffer, i.e.:
+
+.. code-block:: bash
+
+        $ cat /sys/kernel/debug/tracing/trace
+        video_parameter_set_id 0
+        seq_parameter_set_id 0
+        pic_width_in_luma_samples 1920
+        pic_height_in_luma_samples 1080
+        bit_depth_luma_minus8 0
+        bit_depth_chroma_minus8 0
+        log2_max_pic_order_cnt_lsb_minus4 4
+        sps_max_dec_pic_buffering_minus1 6
+        sps_max_num_reorder_pics 2
+        sps_max_latency_increase_plus1 0
+        log2_min_luma_coding_block_size_minus3 0
+        log2_diff_max_min_luma_coding_block_size 3
+        log2_min_luma_transform_block_size_minus2 0
+        log2_diff_max_min_luma_transform_block_size 3
+        max_transform_hierarchy_depth_inter 2
+        max_transform_hierarchy_depth_intra 2
+        pcm_sample_bit_depth_luma_minus1 0
+        pcm_sample_bit_depth_chroma_minus1 0
+        log2_min_pcm_luma_coding_block_size_minus3 0
+        log2_diff_max_min_pcm_luma_coding_block_size 0
+        num_short_term_ref_pic_sets 0
+        num_long_term_ref_pics_sps 0
+        chroma_format_idc 1
+        sps_max_sub_layers_minus1 0
+        flags AMP_ENABLED|SAMPLE_ADAPTIVE_OFFSET|TEMPORAL_MVP_ENABLED|STRONG_INTRA_SMOOTHING_ENABLED
+
+
+Dumping OUTPUT buffer data through debugfs
+------------------------------------------
+
+If the **VISL_DEBUGFS** Kconfig is enabled, visl will populate
+**/sys/kernel/debug/visl/bitstream** with OUTPUT buffer data according to the
+values of bitstream_trace_frame_start and bitstream_trace_nframes. This can
+highlight errors as broken clients may fail to fill the buffers properly.
+
+A single file is created for each processed OUTPUT buffer. Its name contains an
+integer that denotes the buffer sequence, i.e.:
+
+.. code-block:: c
+
+	snprintf(name, 32, "bitstream%d", run->src->sequence);
+
+Dumping the values is simply a matter of reading from the file, i.e.:
+
+For the buffer with sequence == 0:
+
+.. code-block:: bash
+
+        $ xxd /sys/kernel/debug/visl/bitstream/bitstream0
+        00000000: 2601 af04 d088 bc25 a173 0e41 a4f2 3274  &......%.s.A..2t
+        00000010: c668 cb28 e775 b4ac f53a ba60 f8fd 3aa1  .h.(.u...:.`..:.
+        00000020: 46b4 bcfc 506c e227 2372 e5f5 d7ea 579f  F...Pl.'#r....W.
+        00000030: 6371 5eb5 0eb8 23b5 ca6a 5de5 983a 19e4  cq^...#..j]..:..
+        00000040: e8c3 4320 b4ba a226 cbc1 4138 3a12 32d6  ..C ...&..A8:.2.
+        00000050: fef3 247b 3523 4e90 9682 ac8e eb0c a389  ..${5#N.........
+        00000060: ddd0 6cfc 0187 0e20 7aae b15b 1812 3d33  ..l.... z..[..=3
+        00000070: e1c5 f425 a83a 00b7 4f18 8127 3c4c aefb  ...%.:..O..'<L..
+
+For the buffer with sequence == 1:
+
+.. code-block:: bash
+
+        $ xxd /sys/kernel/debug/visl/bitstream/bitstream1
+        00000000: 0201 d021 49e1 0c40 aa11 1449 14a6 01dc  ...!I..@...I....
+        00000010: 7023 889a c8cd 2cd0 13b4 dab0 e8ca 21fe  p#....,.......!.
+        00000020: c4c8 ab4c 486e 4e2f b0df 96cc c74e 8dde  ...LHnN/.....N..
+        00000030: 8ce7 ee36 d880 4095 4d64 30a0 ff4f 0c5e  ...6..@.Md0..O.^
+        00000040: f16b a6a1 d806 ca2a 0ece a673 7bea 1f37  .k.....*...s{..7
+        00000050: 370f 5bb9 1dc4 ba21 6434 bc53 0173 cba0  7.[....!d4.S.s..
+        00000060: dfe6 bc99 01ea b6e0 346b 92b5 c8de 9f5d  ........4k.....]
+        00000070: e7cc 3484 1769 fef2 a693 a945 2c8b 31da  ..4..i.....E,.1.
+
+And so on.
+
+By default, the files are removed during STREAMOFF. This is to reduce the amount
+of clutter.
diff --git a/Documentation/admin-guide/media/vivid.rst b/Documentation/admin-guide/media/vivid.rst
index 6d7175f96f74..58ac25b2c385 100644
--- a/Documentation/admin-guide/media/vivid.rst
+++ b/Documentation/admin-guide/media/vivid.rst
@@ -392,7 +392,7 @@ Which one is returned depends on the chosen channel, each next valid channel
 will cycle through the possible audio subchannel combinations. This allows
 you to test the various combinations by just switching channels..
 
-Finally, for these inputs the v4l2_timecode struct is filled in in the
+Finally, for these inputs the v4l2_timecode struct is filled in the
 dequeued v4l2_buffer struct.
 
 
@@ -580,7 +580,7 @@ Metadata Capture
 ----------------
 
 The Metadata capture generates UVC format metadata. The PTS and SCR are
-transmitted based on the values set in vivid contols.
+transmitted based on the values set in vivid controls.
 
 The Metadata device will only work for the Webcam input, it will give
 back an error for all other inputs.
@@ -714,6 +714,20 @@ The Test Pattern Controls are all specific to video capture.
 
 	does the same for the EAV (End of Active Video) code.
 
+- Insert Video Guard Band
+
+	adds 4 columns of pixels with the HDMI Video Guard Band code at the
+	left hand side of the image. This only works with 3 or 4 byte RGB pixel
+	formats. The RGB pixel value 0xab/0x55/0xab turns out to be equivalent
+	to the HDMI Video Guard Band code that precedes each active video line
+	(see section 5.2.2.1 in the HDMI 1.3 Specification). To test if a video
+	receiver has correct HDMI Video Guard Band processing, enable this
+	control and then move the image to the left hand side of the screen.
+	That will result in video lines that start with multiple pixels that
+	have the same value as the Video Guard Band that precedes them.
+	Receivers that will just keep skipping Video Guard Band values will
+	now fail and either loose sync or these video lines will shift.
+
 
 Capture Feature Selection Controls
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@@ -1304,7 +1318,7 @@ instance. This setup would require the following commands:
 	$ v4l2-ctl -d2 -i2
 	$ v4l2-ctl -d2 -c horizontal_movement=4
 	$ v4l2-ctl -d1 --overlay=1
-	$ v4l2-ctl -d1 -c loop_video=1
+	$ v4l2-ctl -d0 -c loop_video=1
 	$ v4l2-ctl -d2 --stream-mmap --overlay=1
 
 And from another console:
diff --git a/Documentation/admin-guide/media/zr364xx.rst b/Documentation/admin-guide/media/zr364xx.rst
deleted file mode 100644
index 7291e54b8be3..000000000000
--- a/Documentation/admin-guide/media/zr364xx.rst
+++ /dev/null
@@ -1,102 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-Zoran 364xx based USB webcam module
-===================================
-
-site: http://royale.zerezo.com/zr364xx/
-
-mail: royale@zerezo.com
-
-
-Introduction
-------------
-
-
-This brings support under Linux for the Aiptek PocketDV 3300 and similar
-devices in webcam mode. If you just want to get on your PC the pictures
-and movies on the camera, you should use the usb-storage module instead.
-
-The driver works with several other cameras in webcam mode (see the list
-below).
-
-Possible chipsets are : ZR36430 (ZR36430BGC) and
-maybe ZR36431, ZR36440, ZR36442...
-
-You can try the experience changing the vendor/product ID values (look
-at the source code).
-
-You can get these values by looking at /var/log/messages when you plug
-your camera, or by typing : cat /sys/kernel/debug/usb/devices.
-
-
-Install
--------
-
-In order to use this driver, you must compile it with your kernel,
-with the following config options::
-
-    ./scripts/config -e USB
-    ./scripts/config -m MEDIA_SUPPORT
-    ./scripts/config -e MEDIA_USB_SUPPORT
-    ./scripts/config -e MEDIA_CAMERA_SUPPORT
-    ./scripts/config -m USB_ZR364XX
-
-Usage
------
-
-modprobe zr364xx debug=X mode=Y
-
-- debug      : set to 1 to enable verbose debug messages
-- mode       : 0 = 320x240, 1 = 160x120, 2 = 640x480
-
-You can then use the camera with V4L2 compatible applications, for
-example Ekiga.
-
-To capture a single image, try this: dd if=/dev/video0 of=test.jpg bs=1M
-count=1
-
-links
------
-
-http://mxhaard.free.fr/ (support for many others cams including some Aiptek PocketDV)
-http://www.harmwal.nl/pccam880/ (this project also supports cameras based on this chipset)
-
-Supported devices
------------------
-
-======  =======  ==============  ====================
-Vendor  Product  Distributor     Model
-======  =======  ==============  ====================
-0x08ca  0x0109   Aiptek          PocketDV 3300
-0x08ca  0x0109   Maxell          Maxcam PRO DV3
-0x041e  0x4024   Creative        PC-CAM 880
-0x0d64  0x0108   Aiptek          Fidelity 3200
-0x0d64  0x0108   Praktica        DCZ 1.3 S
-0x0d64  0x0108   Genius          Digital Camera (?)
-0x0d64  0x0108   DXG Technology  Fashion Cam
-0x0546  0x3187   Polaroid        iON 230
-0x0d64  0x3108   Praktica        Exakta DC 2200
-0x0d64  0x3108   Genius          G-Shot D211
-0x0595  0x4343   Concord         Eye-Q Duo 1300
-0x0595  0x4343   Concord         Eye-Q Duo 2000
-0x0595  0x4343   Fujifilm        EX-10
-0x0595  0x4343   Ricoh           RDC-6000
-0x0595  0x4343   Digitrex        DSC 1300
-0x0595  0x4343   Firstline       FDC 2000
-0x0bb0  0x500d   Concord         EyeQ Go Wireless
-0x0feb  0x2004   CRS Electronic  3.3 Digital Camera
-0x0feb  0x2004   Packard Bell    DSC-300
-0x055f  0xb500   Mustek          MDC 3000
-0x08ca  0x2062   Aiptek          PocketDV 5700
-0x052b  0x1a18   Chiphead        Megapix V12
-0x04c8  0x0729   Konica          Revio 2
-0x04f2  0xa208   Creative        PC-CAM 850
-0x0784  0x0040   Traveler        Slimline X5
-0x06d6  0x0034   Trust           Powerc@m 750
-0x0a17  0x0062   Pentax          Optio 50L
-0x06d6  0x003b   Trust           Powerc@m 970Z
-0x0a17  0x004e   Pentax          Optio 50
-0x041e  0x405d   Creative        DiVi CAM 516
-0x08ca  0x2102   Aiptek          DV T300
-0x06d6  0x003d   Trust           Powerc@m 910Z
-======  =======  ==============  ====================
diff --git a/Documentation/admin-guide/mm/cma_debugfs.rst b/Documentation/admin-guide/mm/cma_debugfs.rst
index 4e06ffabd78a..7367e6294ef6 100644
--- a/Documentation/admin-guide/mm/cma_debugfs.rst
+++ b/Documentation/admin-guide/mm/cma_debugfs.rst
@@ -5,10 +5,10 @@ CMA Debugfs Interface
 The CMA debugfs interface is useful to retrieve basic information out of the
 different CMA areas and to test allocation/release in each of the areas.
 
-Each CMA zone represents a directory under <debugfs>/cma/, indexed by the
-kernel's CMA index. So the first CMA zone would be:
+Each CMA area represents a directory under <debugfs>/cma/, represented by
+its CMA name like below:
 
-	<debugfs>/cma/cma-0
+	<debugfs>/cma/<cma_name>
 
 The structure of the files created under that directory is as follows:
 
@@ -18,8 +18,8 @@ The structure of the files created under that directory is as follows:
  - [RO] bitmap: The bitmap of page states in the zone.
  - [WO] alloc: Allocate N pages from that CMA area. For example::
 
-	echo 5 > <debugfs>/cma/cma-2/alloc
+	echo 5 > <debugfs>/cma/<cma_name>/alloc
 
-would try to allocate 5 pages from the cma-2 area.
+would try to allocate 5 pages from the 'cma_name' area.
 
  - [WO] free: Free N pages from that CMA area, similar to the above.
diff --git a/Documentation/admin-guide/mm/concepts.rst b/Documentation/admin-guide/mm/concepts.rst
index b966fcff993b..e796b0a7e4a5 100644
--- a/Documentation/admin-guide/mm/concepts.rst
+++ b/Documentation/admin-guide/mm/concepts.rst
@@ -1,5 +1,3 @@
-.. _mm_concepts:
-
 =================
 Concepts overview
 =================
@@ -86,16 +84,15 @@ memory with the huge pages. The first one is `HugeTLB filesystem`, or
 hugetlbfs. It is a pseudo filesystem that uses RAM as its backing
 store. For the files created in this filesystem the data resides in
 the memory and mapped using huge pages. The hugetlbfs is described at
-:ref:`Documentation/admin-guide/mm/hugetlbpage.rst <hugetlbpage>`.
+Documentation/admin-guide/mm/hugetlbpage.rst.
 
 Another, more recent, mechanism that enables use of the huge pages is
 called `Transparent HugePages`, or THP. Unlike the hugetlbfs that
 requires users and/or system administrators to configure what parts of
 the system memory should and can be mapped by the huge pages, THP
 manages such mappings transparently to the user and hence the
-name. See
-:ref:`Documentation/admin-guide/mm/transhuge.rst <admin_guide_transhuge>`
-for more details about THP.
+name. See Documentation/admin-guide/mm/transhuge.rst for more details
+about THP.
 
 Zones
 =====
@@ -125,8 +122,8 @@ processor. Each bank is referred to as a `node` and for each node Linux
 constructs an independent memory management subsystem. A node has its
 own set of zones, lists of free and used pages and various statistics
 counters. You can find more details about NUMA in
-:ref:`Documentation/vm/numa.rst <numa>` and in
-:ref:`Documentation/admin-guide/mm/numa_memory_policy.rst <numa_memory_policy>`.
+Documentation/mm/numa.rst` and in
+Documentation/admin-guide/mm/numa_memory_policy.rst.
 
 Page cache
 ==========
diff --git a/Documentation/admin-guide/mm/damon/index.rst b/Documentation/admin-guide/mm/damon/index.rst
index 61aff88347f3..33d37bb2fb4e 100644
--- a/Documentation/admin-guide/mm/damon/index.rst
+++ b/Documentation/admin-guide/mm/damon/index.rst
@@ -1,10 +1,10 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-========================
-Monitoring Data Accesses
-========================
+==========================
+DAMON: Data Access MONitor
+==========================
 
-:doc:`DAMON </vm/damon/index>` allows light-weight data access monitoring.
+:doc:`DAMON </mm/damon/index>` allows light-weight data access monitoring.
 Using DAMON, users can analyze the memory access patterns of their systems and
 optimize those.
 
@@ -14,3 +14,4 @@ optimize those.
    start
    usage
    reclaim
+   lru_sort
diff --git a/Documentation/admin-guide/mm/damon/lru_sort.rst b/Documentation/admin-guide/mm/damon/lru_sort.rst
new file mode 100644
index 000000000000..7b0775d281b4
--- /dev/null
+++ b/Documentation/admin-guide/mm/damon/lru_sort.rst
@@ -0,0 +1,294 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+DAMON-based LRU-lists Sorting
+=============================
+
+DAMON-based LRU-lists Sorting (DAMON_LRU_SORT) is a static kernel module that
+aimed to be used for proactive and lightweight data access pattern based
+(de)prioritization of pages on their LRU-lists for making LRU-lists a more
+trusworthy data access pattern source.
+
+Where Proactive LRU-lists Sorting is Required?
+==============================================
+
+As page-granularity access checking overhead could be significant on huge
+systems, LRU lists are normally not proactively sorted but partially and
+reactively sorted for special events including specific user requests, system
+calls and memory pressure.  As a result, LRU lists are sometimes not so
+perfectly prepared to be used as a trustworthy access pattern source for some
+situations including reclamation target pages selection under sudden memory
+pressure.
+
+Because DAMON can identify access patterns of best-effort accuracy while
+inducing only user-specified range of overhead, proactively running
+DAMON_LRU_SORT could be helpful for making LRU lists more trustworthy access
+pattern source with low and controlled overhead.
+
+How It Works?
+=============
+
+DAMON_LRU_SORT finds hot pages (pages of memory regions that showing access
+rates that higher than a user-specified threshold) and cold pages (pages of
+memory regions that showing no access for a time that longer than a
+user-specified threshold) using DAMON, and prioritizes hot pages while
+deprioritizing cold pages on their LRU-lists.  To avoid it consuming too much
+CPU for the prioritizations, a CPU time usage limit can be configured.  Under
+the limit, it prioritizes and deprioritizes more hot and cold pages first,
+respectively.  System administrators can also configure under what situation
+this scheme should automatically activated and deactivated with three memory
+pressure watermarks.
+
+Its default parameters for hotness/coldness thresholds and CPU quota limit are
+conservatively chosen.  That is, the module under its default parameters could
+be widely used without harm for common situations while providing a level of
+benefits for systems having clear hot/cold access patterns under memory
+pressure while consuming only a limited small portion of CPU time.
+
+Interface: Module Parameters
+============================
+
+To use this feature, you should first ensure your system is running on a kernel
+that is built with ``CONFIG_DAMON_LRU_SORT=y``.
+
+To let sysadmins enable or disable it and tune for the given system,
+DAMON_LRU_SORT utilizes module parameters.  That is, you can put
+``damon_lru_sort.<parameter>=<value>`` on the kernel boot command line or write
+proper values to ``/sys/module/damon_lru_sort/parameters/<parameter>`` files.
+
+Below are the description of each parameter.
+
+enabled
+-------
+
+Enable or disable DAMON_LRU_SORT.
+
+You can enable DAMON_LRU_SORT by setting the value of this parameter as ``Y``.
+Setting it as ``N`` disables DAMON_LRU_SORT.  Note that DAMON_LRU_SORT could do
+no real monitoring and LRU-lists sorting due to the watermarks-based activation
+condition.  Refer to below descriptions for the watermarks parameter for this.
+
+commit_inputs
+-------------
+
+Make DAMON_LRU_SORT reads the input parameters again, except ``enabled``.
+
+Input parameters that updated while DAMON_LRU_SORT is running are not applied
+by default.  Once this parameter is set as ``Y``, DAMON_LRU_SORT reads values
+of parametrs except ``enabled`` again.  Once the re-reading is done, this
+parameter is set as ``N``.  If invalid parameters are found while the
+re-reading, DAMON_LRU_SORT will be disabled.
+
+hot_thres_access_freq
+---------------------
+
+Access frequency threshold for hot memory regions identification in permil.
+
+If a memory region is accessed in frequency of this or higher, DAMON_LRU_SORT
+identifies the region as hot, and mark it as accessed on the LRU list, so that
+it could not be reclaimed under memory pressure.  50% by default.
+
+cold_min_age
+------------
+
+Time threshold for cold memory regions identification in microseconds.
+
+If a memory region is not accessed for this or longer time, DAMON_LRU_SORT
+identifies the region as cold, and mark it as unaccessed on the LRU list, so
+that it could be reclaimed first under memory pressure.  120 seconds by
+default.
+
+quota_ms
+--------
+
+Limit of time for trying the LRU lists sorting in milliseconds.
+
+DAMON_LRU_SORT tries to use only up to this time within a time window
+(quota_reset_interval_ms) for trying LRU lists sorting.  This can be used
+for limiting CPU consumption of DAMON_LRU_SORT.  If the value is zero, the
+limit is disabled.
+
+10 ms by default.
+
+quota_reset_interval_ms
+-----------------------
+
+The time quota charge reset interval in milliseconds.
+
+The charge reset interval for the quota of time (quota_ms).  That is,
+DAMON_LRU_SORT does not try LRU-lists sorting for more than quota_ms
+milliseconds or quota_sz bytes within quota_reset_interval_ms milliseconds.
+
+1 second by default.
+
+wmarks_interval
+---------------
+
+The watermarks check time interval in microseconds.
+
+Minimal time to wait before checking the watermarks, when DAMON_LRU_SORT is
+enabled but inactive due to its watermarks rule.  5 seconds by default.
+
+wmarks_high
+-----------
+
+Free memory rate (per thousand) for the high watermark.
+
+If free memory of the system in bytes per thousand bytes is higher than this,
+DAMON_LRU_SORT becomes inactive, so it does nothing but periodically checks the
+watermarks.  200 (20%) by default.
+
+wmarks_mid
+----------
+
+Free memory rate (per thousand) for the middle watermark.
+
+If free memory of the system in bytes per thousand bytes is between this and
+the low watermark, DAMON_LRU_SORT becomes active, so starts the monitoring and
+the LRU-lists sorting.  150 (15%) by default.
+
+wmarks_low
+----------
+
+Free memory rate (per thousand) for the low watermark.
+
+If free memory of the system in bytes per thousand bytes is lower than this,
+DAMON_LRU_SORT becomes inactive, so it does nothing but periodically checks the
+watermarks.  50 (5%) by default.
+
+sample_interval
+---------------
+
+Sampling interval for the monitoring in microseconds.
+
+The sampling interval of DAMON for the cold memory monitoring.  Please refer to
+the DAMON documentation (:doc:`usage`) for more detail.  5ms by default.
+
+aggr_interval
+-------------
+
+Aggregation interval for the monitoring in microseconds.
+
+The aggregation interval of DAMON for the cold memory monitoring.  Please
+refer to the DAMON documentation (:doc:`usage`) for more detail.  100ms by
+default.
+
+min_nr_regions
+--------------
+
+Minimum number of monitoring regions.
+
+The minimal number of monitoring regions of DAMON for the cold memory
+monitoring.  This can be used to set lower-bound of the monitoring quality.
+But, setting this too high could result in increased monitoring overhead.
+Please refer to the DAMON documentation (:doc:`usage`) for more detail.  10 by
+default.
+
+max_nr_regions
+--------------
+
+Maximum number of monitoring regions.
+
+The maximum number of monitoring regions of DAMON for the cold memory
+monitoring.  This can be used to set upper-bound of the monitoring overhead.
+However, setting this too low could result in bad monitoring quality.  Please
+refer to the DAMON documentation (:doc:`usage`) for more detail.  1000 by
+defaults.
+
+monitor_region_start
+--------------------
+
+Start of target memory region in physical address.
+
+The start physical address of memory region that DAMON_LRU_SORT will do work
+against.  By default, biggest System RAM is used as the region.
+
+monitor_region_end
+------------------
+
+End of target memory region in physical address.
+
+The end physical address of memory region that DAMON_LRU_SORT will do work
+against.  By default, biggest System RAM is used as the region.
+
+kdamond_pid
+-----------
+
+PID of the DAMON thread.
+
+If DAMON_LRU_SORT is enabled, this becomes the PID of the worker thread.  Else,
+-1.
+
+nr_lru_sort_tried_hot_regions
+-----------------------------
+
+Number of hot memory regions that tried to be LRU-sorted.
+
+bytes_lru_sort_tried_hot_regions
+--------------------------------
+
+Total bytes of hot memory regions that tried to be LRU-sorted.
+
+nr_lru_sorted_hot_regions
+-------------------------
+
+Number of hot memory regions that successfully be LRU-sorted.
+
+bytes_lru_sorted_hot_regions
+----------------------------
+
+Total bytes of hot memory regions that successfully be LRU-sorted.
+
+nr_hot_quota_exceeds
+--------------------
+
+Number of times that the time quota limit for hot regions have exceeded.
+
+nr_lru_sort_tried_cold_regions
+------------------------------
+
+Number of cold memory regions that tried to be LRU-sorted.
+
+bytes_lru_sort_tried_cold_regions
+---------------------------------
+
+Total bytes of cold memory regions that tried to be LRU-sorted.
+
+nr_lru_sorted_cold_regions
+--------------------------
+
+Number of cold memory regions that successfully be LRU-sorted.
+
+bytes_lru_sorted_cold_regions
+-----------------------------
+
+Total bytes of cold memory regions that successfully be LRU-sorted.
+
+nr_cold_quota_exceeds
+---------------------
+
+Number of times that the time quota limit for cold regions have exceeded.
+
+Example
+=======
+
+Below runtime example commands make DAMON_LRU_SORT to find memory regions
+having >=50% access frequency and LRU-prioritize while LRU-deprioritizing
+memory regions that not accessed for 120 seconds.  The prioritization and
+deprioritization is limited to be done using only up to 1% CPU time to avoid
+DAMON_LRU_SORT consuming too much CPU time for the (de)prioritization.  It also
+asks DAMON_LRU_SORT to do nothing if the system's free memory rate is more than
+50%, but start the real works if it becomes lower than 40%.  If DAMON_RECLAIM
+doesn't make progress and therefore the free memory rate becomes lower than
+20%, it asks DAMON_LRU_SORT to do nothing again, so that we can fall back to
+the LRU-list based page granularity reclamation. ::
+
+    # cd /sys/module/damon_lru_sort/parameters
+    # echo 500 > hot_thres_access_freq
+    # echo 120000000 > cold_min_age
+    # echo 10 > quota_ms
+    # echo 1000 > quota_reset_interval_ms
+    # echo 500 > wmarks_high
+    # echo 400 > wmarks_mid
+    # echo 200 > wmarks_low
+    # echo Y > enabled
diff --git a/Documentation/admin-guide/mm/damon/reclaim.rst b/Documentation/admin-guide/mm/damon/reclaim.rst
index fb9def3a7355..343e25b252f4 100644
--- a/Documentation/admin-guide/mm/damon/reclaim.rst
+++ b/Documentation/admin-guide/mm/damon/reclaim.rst
@@ -46,13 +46,7 @@ that is built with ``CONFIG_DAMON_RECLAIM=y``.
 To let sysadmins enable or disable it and tune for the given system,
 DAMON_RECLAIM utilizes module parameters.  That is, you can put
 ``damon_reclaim.<parameter>=<value>`` on the kernel boot command line or write
-proper values to ``/sys/modules/damon_reclaim/parameters/<parameter>`` files.
-
-Note that the parameter values except ``enabled`` are applied only when
-DAMON_RECLAIM starts.  Therefore, if you want to apply new parameter values in
-runtime and DAMON_RECLAIM is already enabled, you should disable and re-enable
-it via ``enabled`` parameter file.  Writing of the new values to proper
-parameter values should be done before the re-enablement.
+proper values to ``/sys/module/damon_reclaim/parameters/<parameter>`` files.
 
 Below are the description of each parameter.
 
@@ -66,6 +60,17 @@ Setting it as ``N`` disables DAMON_RECLAIM.  Note that DAMON_RECLAIM could do
 no real monitoring and reclamation due to the watermarks-based activation
 condition.  Refer to below descriptions for the watermarks parameter for this.
 
+commit_inputs
+-------------
+
+Make DAMON_RECLAIM reads the input parameters again, except ``enabled``.
+
+Input parameters that updated while DAMON_RECLAIM is running are not applied
+by default.  Once this parameter is set as ``Y``, DAMON_RECLAIM reads values
+of parametrs except ``enabled`` again.  Once the re-reading is done, this
+parameter is set as ``N``.  If invalid parameters are found while the
+re-reading, DAMON_RECLAIM will be disabled.
+
 min_age
 -------
 
@@ -200,6 +205,15 @@ The end physical address of memory region that DAMON_RECLAIM will do work
 against.  That is, DAMON_RECLAIM will find cold memory regions in this region
 and reclaims.  By default, biggest System RAM is used as the region.
 
+skip_anon
+---------
+
+Skip anonymous pages reclamation.
+
+If this parameter is set as ``Y``, DAMON_RECLAIM does not reclaim anonymous
+pages.  By default, ``N``.
+
+
 kdamond_pid
 -----------
 
@@ -208,6 +222,31 @@ PID of the DAMON thread.
 If DAMON_RECLAIM is enabled, this becomes the PID of the worker thread.  Else,
 -1.
 
+nr_reclaim_tried_regions
+------------------------
+
+Number of memory regions that tried to be reclaimed by DAMON_RECLAIM.
+
+bytes_reclaim_tried_regions
+---------------------------
+
+Total bytes of memory regions that tried to be reclaimed by DAMON_RECLAIM.
+
+nr_reclaimed_regions
+--------------------
+
+Number of memory regions that successfully be reclaimed by DAMON_RECLAIM.
+
+bytes_reclaimed_regions
+-----------------------
+
+Total bytes of memory regions that successfully be reclaimed by DAMON_RECLAIM.
+
+nr_quota_exceeds
+----------------
+
+Number of times that the time/space quota limits have exceeded.
+
 Example
 =======
 
@@ -221,7 +260,7 @@ therefore the free memory rate becomes lower than 20%, it asks DAMON_RECLAIM to
 do nothing again, so that we can fall back to the LRU-list based page
 granularity reclamation. ::
 
-    # cd /sys/modules/damon_reclaim/parameters
+    # cd /sys/module/damon_reclaim/parameters
     # echo 30000000 > min_age
     # echo $((1 * 1024 * 1024 * 1024)) > quota_sz
     # echo 1000 > quota_reset_interval_ms
@@ -232,4 +271,4 @@ granularity reclamation. ::
 
 .. [1] https://research.google/pubs/pub48551/
 .. [2] https://lwn.net/Articles/787611/
-.. [3] https://www.kernel.org/doc/html/latest/vm/free_page_reporting.html
+.. [3] https://www.kernel.org/doc/html/latest/mm/free_page_reporting.html
diff --git a/Documentation/admin-guide/mm/damon/start.rst b/Documentation/admin-guide/mm/damon/start.rst
index 4d5ca2c46288..9f88afc734da 100644
--- a/Documentation/admin-guide/mm/damon/start.rst
+++ b/Documentation/admin-guide/mm/damon/start.rst
@@ -29,16 +29,9 @@ called DAMON Operator (DAMO).  It is available at
 https://github.com/awslabs/damo.  The examples below assume that ``damo`` is on
 your ``$PATH``.  It's not mandatory, though.
 
-Because DAMO is using the debugfs interface (refer to :doc:`usage` for the
-detail) of DAMON, you should ensure debugfs is mounted.  Mount it manually as
-below::
-
-    # mount -t debugfs none /sys/kernel/debug/
-
-or append the following line to your ``/etc/fstab`` file so that your system
-can automatically mount debugfs upon booting::
-
-    debugfs /sys/kernel/debug debugfs defaults 0 0
+Because DAMO is using the sysfs interface (refer to :doc:`usage` for the
+detail) of DAMON, you should ensure :doc:`sysfs </filesystems/sysfs>` is
+mounted.
 
 
 Recording Data Access Patterns
diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst
index ed96bbf0daff..9b823fec974d 100644
--- a/Documentation/admin-guide/mm/damon/usage.rst
+++ b/Documentation/admin-guide/mm/damon/usage.rst
@@ -4,49 +4,515 @@
 Detailed Usages
 ===============
 
-DAMON provides below three interfaces for different users.
+DAMON provides below interfaces for different users.
 
 - *DAMON user space tool.*
-  This is for privileged people such as system administrators who want a
-  just-working human-friendly interface.  Using this, users can use the DAMON’s
-  major features in a human-friendly way.  It may not be highly tuned for
-  special cases, though.  It supports both virtual and physical address spaces
-  monitoring.
-- *debugfs interface.*
-  This is for privileged user space programmers who want more optimized use of
-  DAMON.  Using this, users can use DAMON’s major features by reading
-  from and writing to special debugfs files.  Therefore, you can write and use
-  your personalized DAMON debugfs wrapper programs that reads/writes the
-  debugfs files instead of you.  The DAMON user space tool is also a reference
-  implementation of such programs.  It supports both virtual and physical
-  address spaces monitoring.
+  `This <https://github.com/awslabs/damo>`_ is for privileged people such as
+  system administrators who want a just-working human-friendly interface.
+  Using this, users can use the DAMON’s major features in a human-friendly way.
+  It may not be highly tuned for special cases, though.  It supports both
+  virtual and physical address spaces monitoring.  For more detail, please
+  refer to its `usage document
+  <https://github.com/awslabs/damo/blob/next/USAGE.md>`_.
+- *sysfs interface.*
+  :ref:`This <sysfs_interface>` is for privileged user space programmers who
+  want more optimized use of DAMON.  Using this, users can use DAMON’s major
+  features by reading from and writing to special sysfs files.  Therefore,
+  you can write and use your personalized DAMON sysfs wrapper programs that
+  reads/writes the sysfs files instead of you.  The `DAMON user space tool
+  <https://github.com/awslabs/damo>`_ is one example of such programs.  It
+  supports both virtual and physical address spaces monitoring.  Note that this
+  interface provides only simple :ref:`statistics <damos_stats>` for the
+  monitoring results.  For detailed monitoring results, DAMON provides a
+  :ref:`tracepoint <tracepoint>`.
+- *debugfs interface. (DEPRECATED!)*
+  :ref:`This <debugfs_interface>` is almost identical to :ref:`sysfs interface
+  <sysfs_interface>`.  This is deprecated, so users should move to the
+  :ref:`sysfs interface <sysfs_interface>`.  If you depend on this and cannot
+  move, please report your usecase to damon@lists.linux.dev and
+  linux-mm@kvack.org.
 - *Kernel Space Programming Interface.*
-  This is for kernel space programmers.  Using this, users can utilize every
-  feature of DAMON most flexibly and efficiently by writing kernel space
-  DAMON application programs for you.  You can even extend DAMON for various
-  address spaces.
+  :doc:`This </mm/damon/api>` is for kernel space programmers.  Using this,
+  users can utilize every feature of DAMON most flexibly and efficiently by
+  writing kernel space DAMON application programs for you.  You can even extend
+  DAMON for various address spaces.  For detail, please refer to the interface
+  :doc:`document </mm/damon/api>`.
 
-Nevertheless, you could write your own user space tool using the debugfs
-interface.  A reference implementation is available at
-https://github.com/awslabs/damo.  If you are a kernel programmer, you could
-refer to :doc:`/vm/damon/api` for the kernel space programming interface.  For
-the reason, this document describes only the debugfs interface
+.. _sysfs_interface:
 
-debugfs Interface
-=================
+sysfs Interface
+===============
+
+DAMON sysfs interface is built when ``CONFIG_DAMON_SYSFS`` is defined.  It
+creates multiple directories and files under its sysfs directory,
+``<sysfs>/kernel/mm/damon/``.  You can control DAMON by writing to and reading
+from the files under the directory.
+
+For a short example, users can monitor the virtual address space of a given
+workload as below. ::
+
+    # cd /sys/kernel/mm/damon/admin/
+    # echo 1 > kdamonds/nr_kdamonds && echo 1 > kdamonds/0/contexts/nr_contexts
+    # echo vaddr > kdamonds/0/contexts/0/operations
+    # echo 1 > kdamonds/0/contexts/0/targets/nr_targets
+    # echo $(pidof <workload>) > kdamonds/0/contexts/0/targets/0/pid_target
+    # echo on > kdamonds/0/state
+
+Files Hierarchy
+---------------
+
+The files hierarchy of DAMON sysfs interface is shown below.  In the below
+figure, parents-children relations are represented with indentations, each
+directory is having ``/`` suffix, and files in each directory are separated by
+comma (","). ::
+
+    /sys/kernel/mm/damon/admin
+    │ kdamonds/nr_kdamonds
+    │ │ 0/state,pid
+    │ │ │ contexts/nr_contexts
+    │ │ │ │ 0/avail_operations,operations
+    │ │ │ │ │ monitoring_attrs/
+    │ │ │ │ │ │ intervals/sample_us,aggr_us,update_us
+    │ │ │ │ │ │ nr_regions/min,max
+    │ │ │ │ │ targets/nr_targets
+    │ │ │ │ │ │ 0/pid_target
+    │ │ │ │ │ │ │ regions/nr_regions
+    │ │ │ │ │ │ │ │ 0/start,end
+    │ │ │ │ │ │ │ │ ...
+    │ │ │ │ │ │ ...
+    │ │ │ │ │ schemes/nr_schemes
+    │ │ │ │ │ │ 0/action
+    │ │ │ │ │ │ │ access_pattern/
+    │ │ │ │ │ │ │ │ sz/min,max
+    │ │ │ │ │ │ │ │ nr_accesses/min,max
+    │ │ │ │ │ │ │ │ age/min,max
+    │ │ │ │ │ │ │ quotas/ms,bytes,reset_interval_ms
+    │ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil
+    │ │ │ │ │ │ │ watermarks/metric,interval_us,high,mid,low
+    │ │ │ │ │ │ │ filters/nr_filters
+    │ │ │ │ │ │ │ │ 0/type,matching,memcg_id
+    │ │ │ │ │ │ │ stats/nr_tried,sz_tried,nr_applied,sz_applied,qt_exceeds
+    │ │ │ │ │ │ │ tried_regions/
+    │ │ │ │ │ │ │ │ 0/start,end,nr_accesses,age
+    │ │ │ │ │ │ │ │ ...
+    │ │ │ │ │ │ ...
+    │ │ │ │ ...
+    │ │ ...
+
+Root
+----
+
+The root of the DAMON sysfs interface is ``<sysfs>/kernel/mm/damon/``, and it
+has one directory named ``admin``.  The directory contains the files for
+privileged user space programs' control of DAMON.  User space tools or deamons
+having the root permission could use this directory.
+
+kdamonds/
+---------
+
+The monitoring-related information including request specifications and results
+are called DAMON context.  DAMON executes each context with a kernel thread
+called kdamond, and multiple kdamonds could run in parallel.
+
+Under the ``admin`` directory, one directory, ``kdamonds``, which has files for
+controlling the kdamonds exist.  In the beginning, this directory has only one
+file, ``nr_kdamonds``.  Writing a number (``N``) to the file creates the number
+of child directories named ``0`` to ``N-1``.  Each directory represents each
+kdamond.
+
+kdamonds/<N>/
+-------------
+
+In each kdamond directory, two files (``state`` and ``pid``) and one directory
+(``contexts``) exist.
+
+Reading ``state`` returns ``on`` if the kdamond is currently running, or
+``off`` if it is not running.  Writing ``on`` or ``off`` makes the kdamond be
+in the state.  Writing ``commit`` to the ``state`` file makes kdamond reads the
+user inputs in the sysfs files except ``state`` file again.  Writing
+``update_schemes_stats`` to ``state`` file updates the contents of stats files
+for each DAMON-based operation scheme of the kdamond.  For details of the
+stats, please refer to :ref:`stats section <sysfs_schemes_stats>`.  Writing
+``update_schemes_tried_regions`` to ``state`` file updates the DAMON-based
+operation scheme action tried regions directory for each DAMON-based operation
+scheme of the kdamond.  Writing ``clear_schemes_tried_regions`` to ``state``
+file clears the DAMON-based operating scheme action tried regions directory for
+each DAMON-based operation scheme of the kdamond.  For details of the
+DAMON-based operation scheme action tried regions directory, please refer to
+:ref:tried_regions section <sysfs_schemes_tried_regions>`.
+
+If the state is ``on``, reading ``pid`` shows the pid of the kdamond thread.
+
+``contexts`` directory contains files for controlling the monitoring contexts
+that this kdamond will execute.
+
+kdamonds/<N>/contexts/
+----------------------
+
+In the beginning, this directory has only one file, ``nr_contexts``.  Writing a
+number (``N``) to the file creates the number of child directories named as
+``0`` to ``N-1``.  Each directory represents each monitoring context.  At the
+moment, only one context per kdamond is supported, so only ``0`` or ``1`` can
+be written to the file.
+
+.. _sysfs_contexts:
+
+contexts/<N>/
+-------------
+
+In each context directory, two files (``avail_operations`` and ``operations``)
+and three directories (``monitoring_attrs``, ``targets``, and ``schemes``)
+exist.
+
+DAMON supports multiple types of monitoring operations, including those for
+virtual address space and the physical address space.  You can get the list of
+available monitoring operations set on the currently running kernel by reading
+``avail_operations`` file.  Based on the kernel configuration, the file will
+list some or all of below keywords.
+
+ - vaddr: Monitor virtual address spaces of specific processes
+ - fvaddr: Monitor fixed virtual address ranges
+ - paddr: Monitor the physical address space of the system
+
+Please refer to :ref:`regions sysfs directory <sysfs_regions>` for detailed
+differences between the operations sets in terms of the monitoring target
+regions.
+
+You can set and get what type of monitoring operations DAMON will use for the
+context by writing one of the keywords listed in ``avail_operations`` file and
+reading from the ``operations`` file.
+
+.. _sysfs_monitoring_attrs:
+
+contexts/<N>/monitoring_attrs/
+------------------------------
+
+Files for specifying attributes of the monitoring including required quality
+and efficiency of the monitoring are in ``monitoring_attrs`` directory.
+Specifically, two directories, ``intervals`` and ``nr_regions`` exist in this
+directory.
+
+Under ``intervals`` directory, three files for DAMON's sampling interval
+(``sample_us``), aggregation interval (``aggr_us``), and update interval
+(``update_us``) exist.  You can set and get the values in micro-seconds by
+writing to and reading from the files.
+
+Under ``nr_regions`` directory, two files for the lower-bound and upper-bound
+of DAMON's monitoring regions (``min`` and ``max``, respectively), which
+controls the monitoring overhead, exist.  You can set and get the values by
+writing to and rading from the files.
+
+For more details about the intervals and monitoring regions range, please refer
+to the Design document (:doc:`/mm/damon/design`).
+
+contexts/<N>/targets/
+---------------------
+
+In the beginning, this directory has only one file, ``nr_targets``.  Writing a
+number (``N``) to the file creates the number of child directories named ``0``
+to ``N-1``.  Each directory represents each monitoring target.
+
+targets/<N>/
+------------
+
+In each target directory, one file (``pid_target``) and one directory
+(``regions``) exist.
+
+If you wrote ``vaddr`` to the ``contexts/<N>/operations``, each target should
+be a process.  You can specify the process to DAMON by writing the pid of the
+process to the ``pid_target`` file.
+
+.. _sysfs_regions:
+
+targets/<N>/regions
+-------------------
+
+When ``vaddr`` monitoring operations set is being used (``vaddr`` is written to
+the ``contexts/<N>/operations`` file), DAMON automatically sets and updates the
+monitoring target regions so that entire memory mappings of target processes
+can be covered.  However, users could want to set the initial monitoring region
+to specific address ranges.
+
+In contrast, DAMON do not automatically sets and updates the monitoring target
+regions when ``fvaddr`` or ``paddr`` monitoring operations sets are being used
+(``fvaddr`` or ``paddr`` have written to the ``contexts/<N>/operations``).
+Therefore, users should set the monitoring target regions by themselves in the
+cases.
+
+For such cases, users can explicitly set the initial monitoring target regions
+as they want, by writing proper values to the files under this directory.
+
+In the beginning, this directory has only one file, ``nr_regions``.  Writing a
+number (``N``) to the file creates the number of child directories named ``0``
+to ``N-1``.  Each directory represents each initial monitoring target region.
+
+regions/<N>/
+------------
+
+In each region directory, you will find two files (``start`` and ``end``).  You
+can set and get the start and end addresses of the initial monitoring target
+region by writing to and reading from the files, respectively.
 
-DAMON exports five files, ``attrs``, ``target_ids``, ``init_regions``,
-``schemes`` and ``monitor_on`` under its debugfs directory,
-``<debugfs>/damon/``.
+Each region should not overlap with others.  ``end`` of directory ``N`` should
+be equal or smaller than ``start`` of directory ``N+1``.
+
+contexts/<N>/schemes/
+---------------------
+
+For usual DAMON-based data access aware memory management optimizations, users
+would normally want the system to apply a memory management action to a memory
+region of a specific access pattern.  DAMON receives such formalized operation
+schemes from the user and applies those to the target memory regions.  Users
+can get and set the schemes by reading from and writing to files under this
+directory.
+
+In the beginning, this directory has only one file, ``nr_schemes``.  Writing a
+number (``N``) to the file creates the number of child directories named ``0``
+to ``N-1``.  Each directory represents each DAMON-based operation scheme.
+
+schemes/<N>/
+------------
+
+In each scheme directory, five directories (``access_pattern``, ``quotas``,
+``watermarks``, ``filters``, ``stats``, and ``tried_regions``) and one file
+(``action``) exist.
+
+The ``action`` file is for setting and getting what action you want to apply to
+memory regions having specific access pattern of the interest.  The keywords
+that can be written to and read from the file and their meaning are as below.
+
+Note that support of each action depends on the running DAMON operations set
+`implementation <sysfs_contexts>`.
+
+ - ``willneed``: Call ``madvise()`` for the region with ``MADV_WILLNEED``.
+   Supported by ``vaddr`` and ``fvaddr`` operations set.
+ - ``cold``: Call ``madvise()`` for the region with ``MADV_COLD``.
+   Supported by ``vaddr`` and ``fvaddr`` operations set.
+ - ``pageout``: Call ``madvise()`` for the region with ``MADV_PAGEOUT``.
+   Supported by ``vaddr``, ``fvaddr`` and ``paddr`` operations set.
+ - ``hugepage``: Call ``madvise()`` for the region with ``MADV_HUGEPAGE``.
+   Supported by ``vaddr`` and ``fvaddr`` operations set.
+ - ``nohugepage``: Call ``madvise()`` for the region with ``MADV_NOHUGEPAGE``.
+   Supported by ``vaddr`` and ``fvaddr`` operations set.
+ - ``lru_prio``: Prioritize the region on its LRU lists.
+   Supported by ``paddr`` operations set.
+ - ``lru_deprio``: Deprioritize the region on its LRU lists.
+   Supported by ``paddr`` operations set.
+ - ``stat``: Do nothing but count the statistics.
+   Supported by all operations sets.
+
+schemes/<N>/access_pattern/
+---------------------------
+
+The target access pattern of each DAMON-based operation scheme is constructed
+with three ranges including the size of the region in bytes, number of
+monitored accesses per aggregate interval, and number of aggregated intervals
+for the age of the region.
+
+Under the ``access_pattern`` directory, three directories (``sz``,
+``nr_accesses``, and ``age``) each having two files (``min`` and ``max``)
+exist.  You can set and get the access pattern for the given scheme by writing
+to and reading from the ``min`` and ``max`` files under ``sz``,
+``nr_accesses``, and ``age`` directories, respectively.
+
+schemes/<N>/quotas/
+-------------------
+
+Optimal ``target access pattern`` for each ``action`` is workload dependent, so
+not easy to find.  Worse yet, setting a scheme of some action too aggressive
+can cause severe overhead.  To avoid such overhead, users can limit time and
+size quota for each scheme.  In detail, users can ask DAMON to try to use only
+up to specific time (``time quota``) for applying the action, and to apply the
+action to only up to specific amount (``size quota``) of memory regions having
+the target access pattern within a given time interval (``reset interval``).
+
+When the quota limit is expected to be exceeded, DAMON prioritizes found memory
+regions of the ``target access pattern`` based on their size, access frequency,
+and age.  For personalized prioritization, users can set the weights for the
+three properties.
+
+Under ``quotas`` directory, three files (``ms``, ``bytes``,
+``reset_interval_ms``) and one directory (``weights``) having three files
+(``sz_permil``, ``nr_accesses_permil``, and ``age_permil``) in it exist.
+
+You can set the ``time quota`` in milliseconds, ``size quota`` in bytes, and
+``reset interval`` in milliseconds by writing the values to the three files,
+respectively.  You can also set the prioritization weights for size, access
+frequency, and age in per-thousand unit by writing the values to the three
+files under the ``weights`` directory.
+
+schemes/<N>/watermarks/
+-----------------------
+
+To allow easy activation and deactivation of each scheme based on system
+status, DAMON provides a feature called watermarks.  The feature receives five
+values called ``metric``, ``interval``, ``high``, ``mid``, and ``low``.  The
+``metric`` is the system metric such as free memory ratio that can be measured.
+If the metric value of the system is higher than the value in ``high`` or lower
+than ``low`` at the memoent, the scheme is deactivated.  If the value is lower
+than ``mid``, the scheme is activated.
+
+Under the watermarks directory, five files (``metric``, ``interval_us``,
+``high``, ``mid``, and ``low``) for setting each value exist.  You can set and
+get the five values by writing to the files, respectively.
+
+Keywords and meanings of those that can be written to the ``metric`` file are
+as below.
+
+ - none: Ignore the watermarks
+ - free_mem_rate: System's free memory rate (per thousand)
+
+The ``interval`` should written in microseconds unit.
+
+schemes/<N>/filters/
+--------------------
+
+Users could know something more than the kernel for specific types of memory.
+In the case, users could do their own management for the memory and hence
+doesn't want DAMOS bothers that.  Users could limit DAMOS by setting the access
+pattern of the scheme and/or the monitoring regions for the purpose, but that
+can be inefficient in some cases.  In such cases, users could set non-access
+pattern driven filters using files in this directory.
+
+In the beginning, this directory has only one file, ``nr_filters``.  Writing a
+number (``N``) to the file creates the number of child directories named ``0``
+to ``N-1``.  Each directory represents each filter.  The filters are evaluated
+in the numeric order.
+
+Each filter directory contains three files, namely ``type``, ``matcing``, and
+``memcg_path``.  You can write one of two special keywords, ``anon`` for
+anonymous pages, or ``memcg`` for specific memory cgroup filtering.  In case of
+the memory cgroup filtering, you can specify the memory cgroup of the interest
+by writing the path of the memory cgroup from the cgroups mount point to
+``memcg_path`` file.  You can write ``Y`` or ``N`` to ``matching`` file to
+filter out pages that does or does not match to the type, respectively.  Then,
+the scheme's action will not be applied to the pages that specified to be
+filtered out.
+
+For example, below restricts a DAMOS action to be applied to only non-anonymous
+pages of all memory cgroups except ``/having_care_already``.::
+
+    # echo 2 > nr_filters
+    # # filter out anonymous pages
+    echo anon > 0/type
+    echo Y > 0/matching
+    # # further filter out all cgroups except one at '/having_care_already'
+    echo memcg > 1/type
+    echo /having_care_already > 1/memcg_path
+    echo N > 1/matching
+
+Note that filters are currently supported only when ``paddr``
+`implementation <sysfs_contexts>` is being used.
+
+.. _sysfs_schemes_stats:
+
+schemes/<N>/stats/
+------------------
+
+DAMON counts the total number and bytes of regions that each scheme is tried to
+be applied, the two numbers for the regions that each scheme is successfully
+applied, and the total number of the quota limit exceeds.  This statistics can
+be used for online analysis or tuning of the schemes.
+
+The statistics can be retrieved by reading the files under ``stats`` directory
+(``nr_tried``, ``sz_tried``, ``nr_applied``, ``sz_applied``, and
+``qt_exceeds``), respectively.  The files are not updated in real time, so you
+should ask DAMON sysfs interface to updte the content of the files for the
+stats by writing a special keyword, ``update_schemes_stats`` to the relevant
+``kdamonds/<N>/state`` file.
+
+.. _sysfs_schemes_tried_regions:
+
+schemes/<N>/tried_regions/
+--------------------------
+
+When a special keyword, ``update_schemes_tried_regions``, is written to the
+relevant ``kdamonds/<N>/state`` file, DAMON creates directories named integer
+starting from ``0`` under this directory.  Each directory contains files
+exposing detailed information about each of the memory region that the
+corresponding scheme's ``action`` has tried to be applied under this directory,
+during next :ref:`aggregation interval <sysfs_monitoring_attrs>`.  The
+information includes address range, ``nr_accesses``, , and ``age`` of the
+region.
+
+The directories will be removed when another special keyword,
+``clear_schemes_tried_regions``, is written to the relevant
+``kdamonds/<N>/state`` file.
+
+tried_regions/<N>/
+------------------
+
+In each region directory, you will find four files (``start``, ``end``,
+``nr_accesses``, and ``age``).  Reading the files will show the start and end
+addresses, ``nr_accesses``, and ``age`` of the region that corresponding
+DAMON-based operation scheme ``action`` has tried to be applied.
+
+Example
+~~~~~~~
+
+Below commands applies a scheme saying "If a memory region of size in [4KiB,
+8KiB] is showing accesses per aggregate interval in [0, 5] for aggregate
+interval in [10, 20], page out the region.  For the paging out, use only up to
+10ms per second, and also don't page out more than 1GiB per second.  Under the
+limitation, page out memory regions having longer age first.  Also, check the
+free memory rate of the system every 5 seconds, start the monitoring and paging
+out when the free memory rate becomes lower than 50%, but stop it if the free
+memory rate becomes larger than 60%, or lower than 30%". ::
+
+    # cd <sysfs>/kernel/mm/damon/admin
+    # # populate directories
+    # echo 1 > kdamonds/nr_kdamonds; echo 1 > kdamonds/0/contexts/nr_contexts;
+    # echo 1 > kdamonds/0/contexts/0/schemes/nr_schemes
+    # cd kdamonds/0/contexts/0/schemes/0
+    # # set the basic access pattern and the action
+    # echo 4096 > access_pattern/sz/min
+    # echo 8192 > access_pattern/sz/max
+    # echo 0 > access_pattern/nr_accesses/min
+    # echo 5 > access_pattern/nr_accesses/max
+    # echo 10 > access_pattern/age/min
+    # echo 20 > access_pattern/age/max
+    # echo pageout > action
+    # # set quotas
+    # echo 10 > quotas/ms
+    # echo $((1024*1024*1024)) > quotas/bytes
+    # echo 1000 > quotas/reset_interval_ms
+    # # set watermark
+    # echo free_mem_rate > watermarks/metric
+    # echo 5000000 > watermarks/interval_us
+    # echo 600 > watermarks/high
+    # echo 500 > watermarks/mid
+    # echo 300 > watermarks/low
+
+Please note that it's highly recommended to use user space tools like `damo
+<https://github.com/awslabs/damo>`_ rather than manually reading and writing
+the files as above.  Above is only for an example.
+
+.. _debugfs_interface:
+
+debugfs Interface (DEPRECATED!)
+===============================
+
+.. note::
+
+  THIS IS DEPRECATED!
+
+  DAMON debugfs interface is deprecated, so users should move to the
+  :ref:`sysfs interface <sysfs_interface>`.  If you depend on this and cannot
+  move, please report your usecase to damon@lists.linux.dev and
+  linux-mm@kvack.org.
+
+DAMON exports eight files, ``attrs``, ``target_ids``, ``init_regions``,
+``schemes``, ``monitor_on``, ``kdamond_pid``, ``mk_contexts`` and
+``rm_contexts`` under its debugfs directory, ``<debugfs>/damon/``.
 
 
 Attributes
 ----------
 
 Users can get and set the ``sampling interval``, ``aggregation interval``,
-``regions update interval``, and min/max number of monitoring target regions by
+``update interval``, and min/max number of monitoring target regions by
 reading from and writing to the ``attrs`` file.  To know about the monitoring
-attributes in detail, please refer to the :doc:`/vm/damon/design`.  For
+attributes in detail, please refer to the :doc:`/mm/damon/design`.  For
 example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10 and
 1000, and then check it again::
 
@@ -102,27 +568,32 @@ regions in case of physical memory monitoring.  Therefore, users should set the
 monitoring target regions by themselves.
 
 In such cases, users can explicitly set the initial monitoring target regions
-as they want, by writing proper values to the ``init_regions`` file.  Each line
-of the input should represent one region in below form.::
+as they want, by writing proper values to the ``init_regions`` file.  The input
+should be a sequence of three integers separated by white spaces that represent
+one region in below form.::
 
-    <target id> <start address> <end address>
+    <target idx> <start address> <end address>
 
-The ``target id`` should already in ``target_ids`` file, and the regions should
-be passed in address order.  For example, below commands will set a couple of
-address ranges, ``1-100`` and ``100-200`` as the initial monitoring target
-region of process 42, and another couple of address ranges, ``20-40`` and
-``50-100`` as that of process 4242.::
+The ``target idx`` should be the index of the target in ``target_ids`` file,
+starting from ``0``, and the regions should be passed in address order.  For
+example, below commands will set a couple of address ranges, ``1-100`` and
+``100-200`` as the initial monitoring target region of pid 42, which is the
+first one (index ``0``) in ``target_ids``, and another couple of address
+ranges, ``20-40`` and ``50-100`` as that of pid 4242, which is the second one
+(index ``1``) in ``target_ids``.::
 
     # cd <debugfs>/damon
-    # echo "42   1       100
-            42   100     200
-            4242 20      40
-            4242 50      100" > init_regions
+    # cat target_ids
+    42 4242
+    # echo "0   1       100 \
+            0   100     200 \
+            1   20      40  \
+            1   50      100" > init_regions
 
 Note that this sets the initial monitoring target regions only.  In case of
 virtual memory monitoring, DAMON will automatically updates the boundary of the
-regions after one ``regions update interval``.  Therefore, users should set the
-``regions update interval`` large enough in this case, if they don't want the
+regions after one ``update interval``.  Therefore, users should set the
+``update interval`` large enough in this case, if they don't want the
 update.
 
 
@@ -131,46 +602,126 @@ Schemes
 
 For usual DAMON-based data access aware memory management optimizations, users
 would simply want the system to apply a memory management action to a memory
-region of a specific size having a specific access frequency for a specific
-time.  DAMON receives such formalized operation schemes from the user and
-applies those to the target processes.  It also counts the total number and
-size of regions that each scheme is applied.  This statistics can be used for
-online analysis or tuning of the schemes.
+region of a specific access pattern.  DAMON receives such formalized operation
+schemes from the user and applies those to the target processes.
 
 Users can get and set the schemes by reading from and writing to ``schemes``
 debugfs file.  Reading the file also shows the statistics of each scheme.  To
-the file, each of the schemes should be represented in each line in below form:
-
-    min-size max-size min-acc max-acc min-age max-age action
-
-Note that the ranges are closed interval.  Bytes for the size of regions
-(``min-size`` and ``max-size``), number of monitored accesses per aggregate
-interval for access frequency (``min-acc`` and ``max-acc``), number of
-aggregate intervals for the age of regions (``min-age`` and ``max-age``), and a
-predefined integer for memory management actions should be used.  The supported
-numbers and their meanings are as below.
-
- - 0: Call ``madvise()`` for the region with ``MADV_WILLNEED``
- - 1: Call ``madvise()`` for the region with ``MADV_COLD``
- - 2: Call ``madvise()`` for the region with ``MADV_PAGEOUT``
- - 3: Call ``madvise()`` for the region with ``MADV_HUGEPAGE``
- - 4: Call ``madvise()`` for the region with ``MADV_NOHUGEPAGE``
+the file, each of the schemes should be represented in each line in below
+form::
+
+    <target access pattern> <action> <quota> <watermarks>
+
+You can disable schemes by simply writing an empty string to the file.
+
+Target Access Pattern
+~~~~~~~~~~~~~~~~~~~~~
+
+The ``<target access pattern>`` is constructed with three ranges in below
+form::
+
+    min-size max-size min-acc max-acc min-age max-age
+
+Specifically, bytes for the size of regions (``min-size`` and ``max-size``),
+number of monitored accesses per aggregate interval for access frequency
+(``min-acc`` and ``max-acc``), number of aggregate intervals for the age of
+regions (``min-age`` and ``max-age``) are specified.  Note that the ranges are
+closed interval.
+
+Action
+~~~~~~
+
+The ``<action>`` is a predefined integer for memory management actions, which
+DAMON will apply to the regions having the target access pattern.  The
+supported numbers and their meanings are as below.
+
+ - 0: Call ``madvise()`` for the region with ``MADV_WILLNEED``.  Ignored if
+   ``target`` is ``paddr``.
+ - 1: Call ``madvise()`` for the region with ``MADV_COLD``.  Ignored if
+   ``target`` is ``paddr``.
+ - 2: Call ``madvise()`` for the region with ``MADV_PAGEOUT``.
+ - 3: Call ``madvise()`` for the region with ``MADV_HUGEPAGE``.  Ignored if
+   ``target`` is ``paddr``.
+ - 4: Call ``madvise()`` for the region with ``MADV_NOHUGEPAGE``.  Ignored if
+   ``target`` is ``paddr``.
  - 5: Do nothing but count the statistics
 
-You can disable schemes by simply writing an empty string to the file.  For
-example, below commands applies a scheme saying "If a memory region of size in
-[4KiB, 8KiB] is showing accesses per aggregate interval in [0, 5] for aggregate
-interval in [10, 20], page out the region", check the entered scheme again, and
-finally remove the scheme. ::
+Quota
+~~~~~
 
-    # cd <debugfs>/damon
-    # echo "4096 8192    0 5    10 20    2" > schemes
-    # cat schemes
-    4096 8192 0 5 10 20 2 0 0
-    # echo > schemes
+Optimal ``target access pattern`` for each ``action`` is workload dependent, so
+not easy to find.  Worse yet, setting a scheme of some action too aggressive
+can cause severe overhead.  To avoid such overhead, users can limit time and
+size quota for the scheme via the ``<quota>`` in below form::
+
+    <ms> <sz> <reset interval> <priority weights>
+
+This makes DAMON to try to use only up to ``<ms>`` milliseconds for applying
+the action to memory regions of the ``target access pattern`` within the
+``<reset interval>`` milliseconds, and to apply the action to only up to
+``<sz>`` bytes of memory regions within the ``<reset interval>``.  Setting both
+``<ms>`` and ``<sz>`` zero disables the quota limits.
 
-The last two integers in the 4th line of above example is the total number and
-the total size of the regions that the scheme is applied.
+When the quota limit is expected to be exceeded, DAMON prioritizes found memory
+regions of the ``target access pattern`` based on their size, access frequency,
+and age.  For personalized prioritization, users can set the weights for the
+three properties in ``<priority weights>`` in below form::
+
+    <size weight> <access frequency weight> <age weight>
+
+Watermarks
+~~~~~~~~~~
+
+Some schemes would need to run based on current value of the system's specific
+metrics like free memory ratio.  For such cases, users can specify watermarks
+for the condition.::
+
+    <metric> <check interval> <high mark> <middle mark> <low mark>
+
+``<metric>`` is a predefined integer for the metric to be checked.  The
+supported numbers and their meanings are as below.
+
+ - 0: Ignore the watermarks
+ - 1: System's free memory rate (per thousand)
+
+The value of the metric is checked every ``<check interval>`` microseconds.
+
+If the value is higher than ``<high mark>`` or lower than ``<low mark>``, the
+scheme is deactivated.  If the value is lower than ``<mid mark>``, the scheme
+is activated.
+
+.. _damos_stats:
+
+Statistics
+~~~~~~~~~~
+
+It also counts the total number and bytes of regions that each scheme is tried
+to be applied, the two numbers for the regions that each scheme is successfully
+applied, and the total number of the quota limit exceeds.  This statistics can
+be used for online analysis or tuning of the schemes.
+
+The statistics can be shown by reading the ``schemes`` file.  Reading the file
+will show each scheme you entered in each line, and the five numbers for the
+statistics will be added at the end of each line.
+
+Example
+~~~~~~~
+
+Below commands applies a scheme saying "If a memory region of size in [4KiB,
+8KiB] is showing accesses per aggregate interval in [0, 5] for aggregate
+interval in [10, 20], page out the region.  For the paging out, use only up to
+10ms per second, and also don't page out more than 1GiB per second.  Under the
+limitation, page out memory regions having longer age first.  Also, check the
+free memory rate of the system every 5 seconds, start the monitoring and paging
+out when the free memory rate becomes lower than 50%, but stop it if the free
+memory rate becomes larger than 60%, or lower than 30%".::
+
+    # cd <debugfs>/damon
+    # scheme="4096 8192  0 5    10 20    2"  # target access pattern and action
+    # scheme+=" 10 $((1024*1024*1024)) 1000" # quotas
+    # scheme+=" 0 0 100"                     # prioritization weights
+    # scheme+=" 1 5000000 600 500 300"       # watermarks
+    # echo "$scheme" > schemes
 
 
 Turning On/Off
@@ -195,6 +746,54 @@ the monitoring is turned on.  If you write to the files while DAMON is running,
 an error code such as ``-EBUSY`` will be returned.
 
 
+Monitoring Thread PID
+---------------------
+
+DAMON does requested monitoring with a kernel thread called ``kdamond``.  You
+can get the pid of the thread by reading the ``kdamond_pid`` file.  When the
+monitoring is turned off, reading the file returns ``none``. ::
+
+    # cd <debugfs>/damon
+    # cat monitor_on
+    off
+    # cat kdamond_pid
+    none
+    # echo on > monitor_on
+    # cat kdamond_pid
+    18594
+
+
+Using Multiple Monitoring Threads
+---------------------------------
+
+One ``kdamond`` thread is created for each monitoring context.  You can create
+and remove monitoring contexts for multiple ``kdamond`` required use case using
+the ``mk_contexts`` and ``rm_contexts`` files.
+
+Writing the name of the new context to the ``mk_contexts`` file creates a
+directory of the name on the DAMON debugfs directory.  The directory will have
+DAMON debugfs files for the context. ::
+
+    # cd <debugfs>/damon
+    # ls foo
+    # ls: cannot access 'foo': No such file or directory
+    # echo foo > mk_contexts
+    # ls foo
+    # attrs  init_regions  kdamond_pid  schemes  target_ids
+
+If the context is not needed anymore, you can remove it and the corresponding
+directory by putting the name of the context to the ``rm_contexts`` file. ::
+
+    # echo foo > rm_contexts
+    # ls foo
+    # ls: cannot access 'foo': No such file or directory
+
+Note that ``mk_contexts``, ``rm_contexts``, and ``monitor_on`` files are in the
+root directory only.
+
+
+.. _tracepoint:
+
 Tracepoint for Monitoring Results
 =================================
 
diff --git a/Documentation/admin-guide/mm/hugetlbpage.rst b/Documentation/admin-guide/mm/hugetlbpage.rst
index 0166f9de3428..e4d4b4a8dc97 100644
--- a/Documentation/admin-guide/mm/hugetlbpage.rst
+++ b/Documentation/admin-guide/mm/hugetlbpage.rst
@@ -1,5 +1,3 @@
-.. _hugetlbpage:
-
 =============
 HugeTLB Pages
 =============
@@ -65,7 +63,7 @@ HugePages_Surp
 	may be temporarily larger than the maximum number of surplus huge
 	pages when the system is under memory pressure.
 Hugepagesize
-	is the default hugepage size (in Kb).
+	is the default hugepage size (in kB).
 Hugetlb
         is the total amount of memory (in kB), consumed by huge
         pages of all sizes.
@@ -86,7 +84,7 @@ by increasing or decreasing the value of ``nr_hugepages``.
 
 Note: When the feature of freeing unused vmemmap pages associated with each
 hugetlb page is enabled, we can fail to free the huge pages triggered by
-the user when ths system is under memory pressure.  Please try again later.
+the user when the system is under memory pressure.  Please try again later.
 
 Pages that are used as huge pages are reserved inside the kernel and cannot
 be used for other purposes.  Huge pages cannot be swapped out under
@@ -164,8 +162,8 @@ default_hugepagesz
 	will all result in 256 2M huge pages being allocated.  Valid default
 	huge page size is architecture dependent.
 hugetlb_free_vmemmap
-	When CONFIG_HUGETLB_PAGE_FREE_VMEMMAP is set, this enables freeing
-	unused vmemmap pages associated with each HugeTLB page.
+	When CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP is set, this enables HugeTLB
+	Vmemmap Optimization (HVO).
 
 When multiple huge page sizes are supported, ``/proc/sys/vm/nr_hugepages``
 indicates the current number of pre-allocated huge pages of the default size.
@@ -313,7 +311,7 @@ memory policy mode--bind, preferred, local or interleave--may be used.  The
 resulting effect on persistent huge page allocation is as follows:
 
 #. Regardless of mempolicy mode [see
-   :ref:`Documentation/admin-guide/mm/numa_memory_policy.rst <numa_memory_policy>`],
+   Documentation/admin-guide/mm/numa_memory_policy.rst],
    persistent huge pages will be distributed across the node or nodes
    specified in the mempolicy as if "interleave" had been specified.
    However, if a node in the policy does not contain sufficient contiguous
@@ -461,13 +459,13 @@ Examples
 .. _map_hugetlb:
 
 ``map_hugetlb``
-	see tools/testing/selftests/vm/map_hugetlb.c
+	see tools/testing/selftests/mm/map_hugetlb.c
 
 ``hugepage-shm``
-	see tools/testing/selftests/vm/hugepage-shm.c
+	see tools/testing/selftests/mm/hugepage-shm.c
 
 ``hugepage-mmap``
-	see tools/testing/selftests/vm/hugepage-mmap.c
+	see tools/testing/selftests/mm/hugepage-mmap.c
 
 The `libhugetlbfs`_  library provides a wide range of userspace tools
 to help with huge page usability, environment setup, and control.
diff --git a/Documentation/admin-guide/mm/idle_page_tracking.rst b/Documentation/admin-guide/mm/idle_page_tracking.rst
index df9394fb39c2..16fcf38dac56 100644
--- a/Documentation/admin-guide/mm/idle_page_tracking.rst
+++ b/Documentation/admin-guide/mm/idle_page_tracking.rst
@@ -1,5 +1,3 @@
-.. _idle_page_tracking:
-
 ==================
 Idle Page Tracking
 ==================
@@ -65,14 +63,13 @@ workload one should:
     are not reclaimable, he or she can filter them out using
     ``/proc/kpageflags``.
 
-The page-types tool in the tools/vm directory can be used to assist in this.
+The page-types tool in the tools/mm directory can be used to assist in this.
 If the tool is run initially with the appropriate option, it will mark all the
 queried pages as idle.  Subsequent runs of the tool can then show which pages have
 their idle flag cleared in the interim.
 
-See :ref:`Documentation/admin-guide/mm/pagemap.rst <pagemap>` for more
-information about ``/proc/pid/pagemap``, ``/proc/kpageflags``, and
-``/proc/kpagecgroup``.
+See Documentation/admin-guide/mm/pagemap.rst for more information about
+``/proc/pid/pagemap``, ``/proc/kpageflags``, and ``/proc/kpagecgroup``.
 
 .. _impl_details:
 
diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst
index c21b5823f126..1f883abf3f00 100644
--- a/Documentation/admin-guide/mm/index.rst
+++ b/Documentation/admin-guide/mm/index.rst
@@ -16,8 +16,7 @@ are described in Documentation/admin-guide/sysctl/vm.rst and in `man 5 proc`_.
 .. _man 5 proc: http://man7.org/linux/man-pages/man5/proc.5.html
 
 Linux memory management has its own jargon and if you are not yet
-familiar with it, consider reading
-:ref:`Documentation/admin-guide/mm/concepts.rst <mm_concepts>`.
+familiar with it, consider reading Documentation/admin-guide/mm/concepts.rst.
 
 Here we document in detail how to interact with various mechanisms in
 the Linux memory management.
@@ -32,10 +31,12 @@ the Linux memory management.
    idle_page_tracking
    ksm
    memory-hotplug
+   multigen_lru
    nommu-mmap
    numa_memory_policy
    numaperf
    pagemap
+   shrinker_debugfs
    soft-dirty
    swap_numa
    transhuge
diff --git a/Documentation/admin-guide/mm/ksm.rst b/Documentation/admin-guide/mm/ksm.rst
index 97d816791aca..7626392fe82c 100644
--- a/Documentation/admin-guide/mm/ksm.rst
+++ b/Documentation/admin-guide/mm/ksm.rst
@@ -1,5 +1,3 @@
-.. _admin_guide_ksm:
-
 =======================
 Kernel Samepage Merging
 =======================
@@ -22,7 +20,7 @@ content which can be replaced by a single write-protected page (which
 is automatically copied if a process later wants to update its
 content). The amount of pages that KSM daemon scans in a single pass
 and the time between the passes are configured using :ref:`sysfs
-intraface <ksm_sysfs>`
+interface <ksm_sysfs>`
 
 KSM only merges anonymous (private) pages, never pagecache (file) pages.
 KSM's merged pages were originally locked into kernel memory, but can now
@@ -159,6 +157,8 @@ stable_node_chains_prune_millisecs
 
 The effectiveness of KSM and MADV_MERGEABLE is shown in ``/sys/kernel/mm/ksm/``:
 
+general_profit
+        how effective is KSM. The calculation is explained below.
 pages_shared
         how many shared pages are being used
 pages_sharing
@@ -184,6 +184,61 @@ The maximum possible ``pages_sharing/pages_shared`` ratio is limited by the
 ``max_page_sharing`` tunable. To increase the ratio ``max_page_sharing`` must
 be increased accordingly.
 
+Monitoring KSM profit
+=====================
+
+KSM can save memory by merging identical pages, but also can consume
+additional memory, because it needs to generate a number of rmap_items to
+save each scanned page's brief rmap information. Some of these pages may
+be merged, but some may not be abled to be merged after being checked
+several times, which are unprofitable memory consumed.
+
+1) How to determine whether KSM save memory or consume memory in system-wide
+   range? Here is a simple approximate calculation for reference::
+
+	general_profit =~ pages_sharing * sizeof(page) - (all_rmap_items) *
+			  sizeof(rmap_item);
+
+   where all_rmap_items can be easily obtained by summing ``pages_sharing``,
+   ``pages_shared``, ``pages_unshared`` and ``pages_volatile``.
+
+2) The KSM profit inner a single process can be similarly obtained by the
+   following approximate calculation::
+
+	process_profit =~ ksm_merging_pages * sizeof(page) -
+			  ksm_rmap_items * sizeof(rmap_item).
+
+   where ksm_merging_pages is shown under the directory ``/proc/<pid>/``,
+   and ksm_rmap_items is shown in ``/proc/<pid>/ksm_stat``. The process profit
+   is also shown in ``/proc/<pid>/ksm_stat`` as ksm_process_profit.
+
+From the perspective of application, a high ratio of ``ksm_rmap_items`` to
+``ksm_merging_pages`` means a bad madvise-applied policy, so developers or
+administrators have to rethink how to change madvise policy. Giving an example
+for reference, a page's size is usually 4K, and the rmap_item's size is
+separately 32B on 32-bit CPU architecture and 64B on 64-bit CPU architecture.
+so if the ``ksm_rmap_items/ksm_merging_pages`` ratio exceeds 64 on 64-bit CPU
+or exceeds 128 on 32-bit CPU, then the app's madvise policy should be dropped,
+because the ksm profit is approximately zero or negative.
+
+Monitoring KSM events
+=====================
+
+There are some counters in /proc/vmstat that may be used to monitor KSM events.
+KSM might help save memory, it's a tradeoff by may suffering delay on KSM COW
+or on swapping in copy. Those events could help users evaluate whether or how
+to use KSM. For example, if cow_ksm increases too fast, user may decrease the
+range of madvise(, , MADV_MERGEABLE).
+
+cow_ksm
+	is incremented every time a KSM page triggers copy on write (COW)
+	when users try to write to a KSM page, we have to make a copy.
+
+ksm_swpin_copy
+	is incremented every time a KSM page is copied when swapping in
+	note that KSM page might be copied when swapping in because do_swap_page()
+	cannot do all the locking needed to reconstitute a cross-anon_vma KSM page.
+
 --
 Izik Eidus,
 Hugh Dickins, 17 Nov 2009
diff --git a/Documentation/admin-guide/mm/memory-hotplug.rst b/Documentation/admin-guide/mm/memory-hotplug.rst
index 0f56ecd8ac05..1b02fe5807cc 100644
--- a/Documentation/admin-guide/mm/memory-hotplug.rst
+++ b/Documentation/admin-guide/mm/memory-hotplug.rst
@@ -1,5 +1,3 @@
-.. _admin_guide_memory_hotplug:
-
 ==================
 Memory Hot(Un)Plug
 ==================
@@ -653,8 +651,8 @@ block might fail:
 - Concurrent activity that operates on the same physical memory area, such as
   allocating gigantic pages, can result in temporary offlining failures.
 
-- Out of memory when dissolving huge pages, especially when freeing unused
-  vmemmap pages associated with each hugetlb page is enabled.
+- Out of memory when dissolving huge pages, especially when HugeTLB Vmemmap
+  Optimization (HVO) is enabled.
 
   Offlining code may be able to migrate huge page contents, but may not be able
   to dissolve the source huge page because it fails allocating (unmovable) pages
diff --git a/Documentation/admin-guide/mm/multigen_lru.rst b/Documentation/admin-guide/mm/multigen_lru.rst
new file mode 100644
index 000000000000..33e068830497
--- /dev/null
+++ b/Documentation/admin-guide/mm/multigen_lru.rst
@@ -0,0 +1,162 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============
+Multi-Gen LRU
+=============
+The multi-gen LRU is an alternative LRU implementation that optimizes
+page reclaim and improves performance under memory pressure. Page
+reclaim decides the kernel's caching policy and ability to overcommit
+memory. It directly impacts the kswapd CPU usage and RAM efficiency.
+
+Quick start
+===========
+Build the kernel with the following configurations.
+
+* ``CONFIG_LRU_GEN=y``
+* ``CONFIG_LRU_GEN_ENABLED=y``
+
+All set!
+
+Runtime options
+===============
+``/sys/kernel/mm/lru_gen/`` contains stable ABIs described in the
+following subsections.
+
+Kill switch
+-----------
+``enabled`` accepts different values to enable or disable the
+following components. Its default value depends on
+``CONFIG_LRU_GEN_ENABLED``. All the components should be enabled
+unless some of them have unforeseen side effects. Writing to
+``enabled`` has no effect when a component is not supported by the
+hardware, and valid values will be accepted even when the main switch
+is off.
+
+====== ===============================================================
+Values Components
+====== ===============================================================
+0x0001 The main switch for the multi-gen LRU.
+0x0002 Clearing the accessed bit in leaf page table entries in large
+       batches, when MMU sets it (e.g., on x86). This behavior can
+       theoretically worsen lock contention (mmap_lock). If it is
+       disabled, the multi-gen LRU will suffer a minor performance
+       degradation for workloads that contiguously map hot pages,
+       whose accessed bits can be otherwise cleared by fewer larger
+       batches.
+0x0004 Clearing the accessed bit in non-leaf page table entries as
+       well, when MMU sets it (e.g., on x86). This behavior was not
+       verified on x86 varieties other than Intel and AMD. If it is
+       disabled, the multi-gen LRU will suffer a negligible
+       performance degradation.
+[yYnN] Apply to all the components above.
+====== ===============================================================
+
+E.g.,
+::
+
+    echo y >/sys/kernel/mm/lru_gen/enabled
+    cat /sys/kernel/mm/lru_gen/enabled
+    0x0007
+    echo 5 >/sys/kernel/mm/lru_gen/enabled
+    cat /sys/kernel/mm/lru_gen/enabled
+    0x0005
+
+Thrashing prevention
+--------------------
+Personal computers are more sensitive to thrashing because it can
+cause janks (lags when rendering UI) and negatively impact user
+experience. The multi-gen LRU offers thrashing prevention to the
+majority of laptop and desktop users who do not have ``oomd``.
+
+Users can write ``N`` to ``min_ttl_ms`` to prevent the working set of
+``N`` milliseconds from getting evicted. The OOM killer is triggered
+if this working set cannot be kept in memory. In other words, this
+option works as an adjustable pressure relief valve, and when open, it
+terminates applications that are hopefully not being used.
+
+Based on the average human detectable lag (~100ms), ``N=1000`` usually
+eliminates intolerable janks due to thrashing. Larger values like
+``N=3000`` make janks less noticeable at the risk of premature OOM
+kills.
+
+The default value ``0`` means disabled.
+
+Experimental features
+=====================
+``/sys/kernel/debug/lru_gen`` accepts commands described in the
+following subsections. Multiple command lines are supported, so does
+concatenation with delimiters ``,`` and ``;``.
+
+``/sys/kernel/debug/lru_gen_full`` provides additional stats for
+debugging. ``CONFIG_LRU_GEN_STATS=y`` keeps historical stats from
+evicted generations in this file.
+
+Working set estimation
+----------------------
+Working set estimation measures how much memory an application needs
+in a given time interval, and it is usually done with little impact on
+the performance of the application. E.g., data centers want to
+optimize job scheduling (bin packing) to improve memory utilizations.
+When a new job comes in, the job scheduler needs to find out whether
+each server it manages can allocate a certain amount of memory for
+this new job before it can pick a candidate. To do so, the job
+scheduler needs to estimate the working sets of the existing jobs.
+
+When it is read, ``lru_gen`` returns a histogram of numbers of pages
+accessed over different time intervals for each memcg and node.
+``MAX_NR_GENS`` decides the number of bins for each histogram. The
+histograms are noncumulative.
+::
+
+    memcg  memcg_id  memcg_path
+       node  node_id
+           min_gen_nr  age_in_ms  nr_anon_pages  nr_file_pages
+           ...
+           max_gen_nr  age_in_ms  nr_anon_pages  nr_file_pages
+
+Each bin contains an estimated number of pages that have been accessed
+within ``age_in_ms``. E.g., ``min_gen_nr`` contains the coldest pages
+and ``max_gen_nr`` contains the hottest pages, since ``age_in_ms`` of
+the former is the largest and that of the latter is the smallest.
+
+Users can write the following command to ``lru_gen`` to create a new
+generation ``max_gen_nr+1``:
+
+    ``+ memcg_id node_id max_gen_nr [can_swap [force_scan]]``
+
+``can_swap`` defaults to the swap setting and, if it is set to ``1``,
+it forces the scan of anon pages when swap is off, and vice versa.
+``force_scan`` defaults to ``1`` and, if it is set to ``0``, it
+employs heuristics to reduce the overhead, which is likely to reduce
+the coverage as well.
+
+A typical use case is that a job scheduler runs this command at a
+certain time interval to create new generations, and it ranks the
+servers it manages based on the sizes of their cold pages defined by
+this time interval.
+
+Proactive reclaim
+-----------------
+Proactive reclaim induces page reclaim when there is no memory
+pressure. It usually targets cold pages only. E.g., when a new job
+comes in, the job scheduler wants to proactively reclaim cold pages on
+the server it selected, to improve the chance of successfully landing
+this new job.
+
+Users can write the following command to ``lru_gen`` to evict
+generations less than or equal to ``min_gen_nr``.
+
+    ``- memcg_id node_id min_gen_nr [swappiness [nr_to_reclaim]]``
+
+``min_gen_nr`` should be less than ``max_gen_nr-1``, since
+``max_gen_nr`` and ``max_gen_nr-1`` are not fully aged (equivalent to
+the active list) and therefore cannot be evicted. ``swappiness``
+overrides the default value in ``/proc/sys/vm/swappiness``.
+``nr_to_reclaim`` limits the number of pages to evict.
+
+A typical use case is that a job scheduler runs this command before it
+tries to land a new job on a server. If it fails to materialize enough
+cold pages because of the overestimation, it retries on the next
+server according to the ranking result obtained from the working set
+estimation step. This less forceful approach limits the impacts on the
+existing jobs.
diff --git a/Documentation/admin-guide/mm/numa_memory_policy.rst b/Documentation/admin-guide/mm/numa_memory_policy.rst
index 64fd0ba0d057..46515ad2337f 100644
--- a/Documentation/admin-guide/mm/numa_memory_policy.rst
+++ b/Documentation/admin-guide/mm/numa_memory_policy.rst
@@ -1,5 +1,3 @@
-.. _numa_memory_policy:
-
 ==================
 NUMA Memory Policy
 ==================
@@ -246,7 +244,7 @@ MPOL_INTERLEAVED
 	interleaved system default policy works in this mode.
 
 MPOL_PREFERRED_MANY
-	This mode specifices that the allocation should be preferrably
+	This mode specifies that the allocation should be preferably
 	satisfied from the nodemask specified in the policy. If there is
 	a memory pressure on all nodes in the nodemask, the allocation
 	can fall back to all existing numa nodes. This is effectively
@@ -360,7 +358,7 @@ and NUMA nodes.  "Usage" here means one of the following:
 2) examination of the policy to determine the policy mode and associated node
    or node lists, if any, for page allocation.  This is considered a "hot
    path".  Note that for MPOL_BIND, the "usage" extends across the entire
-   allocation process, which may sleep during page reclaimation, because the
+   allocation process, which may sleep during page reclamation, because the
    BIND policy nodemask is used, by reference, to filter ineligible nodes.
 
 We can avoid taking an extra reference during the usages listed above as
@@ -408,7 +406,7 @@ follows:
 Memory Policy APIs
 ==================
 
-Linux supports 3 system calls for controlling memory policy.  These APIS
+Linux supports 4 system calls for controlling memory policy.  These APIS
 always affect only the calling task, the calling task's address space, or
 some shared object mapped into the calling task's address space.
 
@@ -460,6 +458,20 @@ requested via the 'flags' argument.
 
 See the mbind(2) man page for more details.
 
+Set home node for a Range of Task's Address Spacec::
+
+	long sys_set_mempolicy_home_node(unsigned long start, unsigned long len,
+					 unsigned long home_node,
+					 unsigned long flags);
+
+sys_set_mempolicy_home_node set the home node for a VMA policy present in the
+task's address range. The system call updates the home node only for the existing
+mempolicy range. Other address ranges are ignored. A home node is the NUMA node
+closest to which page allocation will come from. Specifying the home node override
+the default allocation policy to allocate memory close to the local node for an
+executing CPU.
+
+
 Memory Policy Command Line Interface
 ====================================
 
diff --git a/Documentation/admin-guide/mm/numaperf.rst b/Documentation/admin-guide/mm/numaperf.rst
index 166697325947..90a12b6a8bfc 100644
--- a/Documentation/admin-guide/mm/numaperf.rst
+++ b/Documentation/admin-guide/mm/numaperf.rst
@@ -1,6 +1,7 @@
-.. _numaperf:
+=======================
+NUMA Memory Performance
+=======================
 
-=============
 NUMA Locality
 =============
 
@@ -61,7 +62,6 @@ that are CPUs and hence suitable for generic task scheduling, and
 IO initiators such as GPUs and NICs.  Unlike access class 0, only
 nodes containing CPUs are considered.
 
-================
 NUMA Performance
 ================
 
@@ -96,7 +96,6 @@ for the platform.
 Access class 1 takes the same form but only includes values for CPU to
 memory activity.
 
-==========
 NUMA Cache
 ==========
 
@@ -170,7 +169,6 @@ The "size" is the number of bytes provided by this cache level.
 The "write_policy" will be 0 for write-back, and non-zero for
 write-through caching.
 
-========
 See Also
 ========
 
diff --git a/Documentation/admin-guide/mm/pagemap.rst b/Documentation/admin-guide/mm/pagemap.rst
index bfc28704856c..c8f380271cad 100644
--- a/Documentation/admin-guide/mm/pagemap.rst
+++ b/Documentation/admin-guide/mm/pagemap.rst
@@ -1,5 +1,3 @@
-.. _pagemap:
-
 =============================
 Examining Process Page Tables
 =============================
@@ -19,11 +17,11 @@ There are four components to pagemap:
     * Bits 0-4   swap type if swapped
     * Bits 5-54  swap offset if swapped
     * Bit  55    pte is soft-dirty (see
-      :ref:`Documentation/admin-guide/mm/soft-dirty.rst <soft_dirty>`)
+      Documentation/admin-guide/mm/soft-dirty.rst)
     * Bit  56    page exclusively mapped (since 4.2)
     * Bit  57    pte is uffd-wp write-protected (since 5.13) (see
-      :ref:`Documentation/admin-guide/mm/userfaultfd.rst <userfaultfd>`)
-    * Bits 57-60 zero
+      Documentation/admin-guide/mm/userfaultfd.rst)
+    * Bits 58-60 zero
     * Bit  61    page is file-page or shared-anon (since 3.5)
     * Bit  62    page swapped
     * Bit  63    page present
@@ -46,7 +44,7 @@ There are four components to pagemap:
  * ``/proc/kpagecount``.  This file contains a 64-bit count of the number of
    times each page is mapped, indexed by PFN.
 
-The page-types tool in the tools/vm directory can be used to query the
+The page-types tool in the tools/mm directory can be used to query the
 number of times a page is mapped.
 
  * ``/proc/kpageflags``.  This file contains a 64-bit set of flags for each
@@ -93,9 +91,9 @@ Short descriptions to the page flags
    The page is being locked for exclusive access, e.g. by undergoing read/write
    IO.
 7 - SLAB
-   The page is managed by the SLAB/SLOB/SLUB/SLQB kernel memory allocator.
-   When compound page is used, SLUB/SLQB will only set this flag on the head
-   page; SLOB will not flag it at all.
+   The page is managed by the SLAB/SLUB kernel memory allocator.
+   When compound page is used, either will only set this flag on the head
+   page.
 10 - BUDDY
     A free memory block managed by the buddy system allocator.
     The buddy system organizes free memory in blocks of various orders.
@@ -105,8 +103,7 @@ Short descriptions to the page flags
     A compound page with order N consists of 2^N physically contiguous pages.
     A compound page with order 2 takes the form of "HTTT", where H donates its
     head page and T donates its tail page(s).  The major consumers of compound
-    pages are hugeTLB pages
-    (:ref:`Documentation/admin-guide/mm/hugetlbpage.rst <hugetlbpage>`),
+    pages are hugeTLB pages (Documentation/admin-guide/mm/hugetlbpage.rst),
     the SLUB etc.  memory allocators and various device drivers.
     However in this interface, only huge/giga pages are made visible
     to end users.
@@ -128,7 +125,7 @@ Short descriptions to the page flags
     Zero page for pfn_zero or huge_zero page.
 25 - IDLE
     The page has not been accessed since it was marked idle (see
-    :ref:`Documentation/admin-guide/mm/idle_page_tracking.rst <idle_page_tracking>`).
+    Documentation/admin-guide/mm/idle_page_tracking.rst).
     Note that this flag may be stale in case the page was accessed via
     a PTE. To make sure the flag is up-to-date one has to read
     ``/sys/kernel/mm/page_idle/bitmap`` first.
@@ -173,7 +170,7 @@ LRU related page flags
 14 - SWAPBACKED
    The page is backed by swap/RAM.
 
-The page-types tool in the tools/vm directory can be used to query the
+The page-types tool in the tools/mm directory can be used to query the
 above flags.
 
 Using pagemap to do something useful
diff --git a/Documentation/admin-guide/mm/shrinker_debugfs.rst b/Documentation/admin-guide/mm/shrinker_debugfs.rst
new file mode 100644
index 000000000000..c582033bd113
--- /dev/null
+++ b/Documentation/admin-guide/mm/shrinker_debugfs.rst
@@ -0,0 +1,133 @@
+==========================
+Shrinker Debugfs Interface
+==========================
+
+Shrinker debugfs interface provides a visibility into the kernel memory
+shrinkers subsystem and allows to get information about individual shrinkers
+and interact with them.
+
+For each shrinker registered in the system a directory in **<debugfs>/shrinker/**
+is created. The directory's name is composed from the shrinker's name and an
+unique id: e.g. *kfree_rcu-0* or *sb-xfs:vda1-36*.
+
+Each shrinker directory contains **count** and **scan** files, which allow to
+trigger *count_objects()* and *scan_objects()* callbacks for each memcg and
+numa node (if applicable).
+
+Usage:
+------
+
+1. *List registered shrinkers*
+
+  ::
+
+    $ cd /sys/kernel/debug/shrinker/
+    $ ls
+    dquota-cache-16     sb-devpts-28     sb-proc-47       sb-tmpfs-42
+    mm-shadow-18        sb-devtmpfs-5    sb-proc-48       sb-tmpfs-43
+    mm-zspool:zram0-34  sb-hugetlbfs-17  sb-pstore-31     sb-tmpfs-44
+    rcu-kfree-0         sb-hugetlbfs-33  sb-rootfs-2      sb-tmpfs-49
+    sb-aio-20           sb-iomem-12      sb-securityfs-6  sb-tracefs-13
+    sb-anon_inodefs-15  sb-mqueue-21     sb-selinuxfs-22  sb-xfs:vda1-36
+    sb-bdev-3           sb-nsfs-4        sb-sockfs-8      sb-zsmalloc-19
+    sb-bpf-32           sb-pipefs-14     sb-sysfs-26      thp-deferred_split-10
+    sb-btrfs:vda2-24    sb-proc-25       sb-tmpfs-1       thp-zero-9
+    sb-cgroup2-30       sb-proc-39       sb-tmpfs-27      xfs-buf:vda1-37
+    sb-configfs-23      sb-proc-41       sb-tmpfs-29      xfs-inodegc:vda1-38
+    sb-dax-11           sb-proc-45       sb-tmpfs-35
+    sb-debugfs-7        sb-proc-46       sb-tmpfs-40
+
+2. *Get information about a specific shrinker*
+
+  ::
+
+    $ cd sb-btrfs\:vda2-24/
+    $ ls
+    count            scan
+
+3. *Count objects*
+
+  Each line in the output has the following format::
+
+    <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1> ...
+    <cgroup inode id> <nr of objects on node 0> <nr of objects on node 1> ...
+    ...
+
+  If there are no objects on all numa nodes, a line is omitted. If there
+  are no objects at all, the output might be empty.
+
+  If the shrinker is not memcg-aware or CONFIG_MEMCG is off, 0 is printed
+  as cgroup inode id. If the shrinker is not numa-aware, 0's are printed
+  for all nodes except the first one.
+  ::
+
+    $ cat count
+    1 224 2
+    21 98 0
+    55 818 10
+    2367 2 0
+    2401 30 0
+    225 13 0
+    599 35 0
+    939 124 0
+    1041 3 0
+    1075 1 0
+    1109 1 0
+    1279 60 0
+    1313 7 0
+    1347 39 0
+    1381 3 0
+    1449 14 0
+    1483 63 0
+    1517 53 0
+    1551 6 0
+    1585 1 0
+    1619 6 0
+    1653 40 0
+    1687 11 0
+    1721 8 0
+    1755 4 0
+    1789 52 0
+    1823 888 0
+    1857 1 0
+    1925 2 0
+    1959 32 0
+    2027 22 0
+    2061 9 0
+    2469 799 0
+    2537 861 0
+    2639 1 0
+    2707 70 0
+    2775 4 0
+    2877 84 0
+    293 1 0
+    735 8 0
+
+4. *Scan objects*
+
+  The expected input format::
+
+    <cgroup inode id> <numa id> <number of objects to scan>
+
+  For a non-memcg-aware shrinker or on a system with no memory
+  cgrups **0** should be passed as cgroup id.
+  ::
+
+    $ cd /sys/kernel/debug/shrinker/
+    $ cd sb-btrfs\:vda2-24/
+
+    $ cat count | head -n 5
+    1 212 0
+    21 97 0
+    55 802 5
+    2367 2 0
+    225 13 0
+
+    $ echo "55 0 200" > scan
+
+    $ cat count | head -n 5
+    1 212 0
+    21 96 0
+    55 752 5
+    2367 2 0
+    225 13 0
diff --git a/Documentation/admin-guide/mm/soft-dirty.rst b/Documentation/admin-guide/mm/soft-dirty.rst
index cb0cfd6672fa..aeea936caa44 100644
--- a/Documentation/admin-guide/mm/soft-dirty.rst
+++ b/Documentation/admin-guide/mm/soft-dirty.rst
@@ -1,5 +1,3 @@
-.. _soft_dirty:
-
 ===============
 Soft-Dirty PTEs
 ===============
diff --git a/Documentation/admin-guide/mm/swap_numa.rst b/Documentation/admin-guide/mm/swap_numa.rst
index e0466f2db8fa..2e630627bcee 100644
--- a/Documentation/admin-guide/mm/swap_numa.rst
+++ b/Documentation/admin-guide/mm/swap_numa.rst
@@ -1,5 +1,3 @@
-.. _swap_numa:
-
 ===========================================
 Automatically bind swap device to numa node
 ===========================================
diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst
index c9c37f16eef8..b0cc8243e093 100644
--- a/Documentation/admin-guide/mm/transhuge.rst
+++ b/Documentation/admin-guide/mm/transhuge.rst
@@ -1,5 +1,3 @@
-.. _admin_guide_transhuge:
-
 ============================
 Transparent Hugepage Support
 ============================
@@ -191,7 +189,14 @@ allocation failure to throttle the next allocation attempt::
 
 	/sys/kernel/mm/transparent_hugepage/khugepaged/alloc_sleep_millisecs
 
-The khugepaged progress can be seen in the number of pages collapsed::
+The khugepaged progress can be seen in the number of pages collapsed (note
+that this counter may not be an exact count of the number of pages
+collapsed, since "collapsed" could mean multiple things: (1) A PTE mapping
+being replaced by a PMD mapping, or (2) All 4K physical pages replaced by
+one 2M hugepage. Each may happen independently, or together, depending on
+the type of memory and the failures that occur. As such, this value should
+be interpreted roughly as a sign of progress, and counters in /proc/vmstat
+consulted for more accurate accounting)::
 
 	/sys/kernel/mm/transparent_hugepage/khugepaged/pages_collapsed
 
@@ -366,10 +371,9 @@ thp_split_pmd
 	page table entry.
 
 thp_zero_page_alloc
-	is incremented every time a huge zero page is
-	successfully allocated. It includes allocations which where
-	dropped due race with other allocation. Note, it doesn't count
-	every map of the huge zero page, only its allocation.
+	is incremented every time a huge zero page used for thp is
+	successfully allocated. Note, it doesn't count every map of
+	the huge zero page, only its allocation.
 
 thp_zero_page_alloc_failed
 	is incremented if kernel fails to allocate
diff --git a/Documentation/admin-guide/mm/userfaultfd.rst b/Documentation/admin-guide/mm/userfaultfd.rst
index 6528036093e1..7c304e432205 100644
--- a/Documentation/admin-guide/mm/userfaultfd.rst
+++ b/Documentation/admin-guide/mm/userfaultfd.rst
@@ -1,5 +1,3 @@
-.. _userfaultfd:
-
 ===========
 Userfaultfd
 ===========
@@ -17,7 +15,10 @@ of the ``PROT_NONE+SIGSEGV`` trick.
 Design
 ======
 
-Userfaults are delivered and resolved through the ``userfaultfd`` syscall.
+Userspace creates a new userfaultfd, initializes it, and registers one or more
+regions of virtual memory with it. Then, any page faults which occur within the
+region(s) result in a message being delivered to the userfaultfd, notifying
+userspace of the fault.
 
 The ``userfaultfd`` (aside from registering and unregistering virtual
 memory ranges) provides two primary functionalities:
@@ -34,12 +35,11 @@ The real advantage of userfaults if compared to regular virtual memory
 management of mremap/mprotect is that the userfaults in all their
 operations never involve heavyweight structures like vmas (in fact the
 ``userfaultfd`` runtime load never takes the mmap_lock for writing).
-
 Vmas are not suitable for page- (or hugepage) granular fault tracking
 when dealing with virtual address spaces that could span
 Terabytes. Too many vmas would be needed for that.
 
-The ``userfaultfd`` once opened by invoking the syscall, can also be
+The ``userfaultfd``, once created, can also be
 passed using unix domain sockets to a manager process, so the same
 manager process could handle the userfaults of a multitude of
 different processes without them being aware about what is going on
@@ -50,6 +50,39 @@ is a corner case that would currently return ``-EBUSY``).
 API
 ===
 
+Creating a userfaultfd
+----------------------
+
+There are two ways to create a new userfaultfd, each of which provide ways to
+restrict access to this functionality (since historically userfaultfds which
+handle kernel page faults have been a useful tool for exploiting the kernel).
+
+The first way, supported since userfaultfd was introduced, is the
+userfaultfd(2) syscall. Access to this is controlled in several ways:
+
+- Any user can always create a userfaultfd which traps userspace page faults
+  only. Such a userfaultfd can be created using the userfaultfd(2) syscall
+  with the flag UFFD_USER_MODE_ONLY.
+
+- In order to also trap kernel page faults for the address space, either the
+  process needs the CAP_SYS_PTRACE capability, or the system must have
+  vm.unprivileged_userfaultfd set to 1. By default, vm.unprivileged_userfaultfd
+  is set to 0.
+
+The second way, added to the kernel more recently, is by opening
+/dev/userfaultfd and issuing a USERFAULTFD_IOC_NEW ioctl to it. This method
+yields equivalent userfaultfds to the userfaultfd(2) syscall.
+
+Unlike userfaultfd(2), access to /dev/userfaultfd is controlled via normal
+filesystem permissions (user/group/mode), which gives fine grained access to
+userfaultfd specifically, without also granting other unrelated privileges at
+the same time (as e.g. granting CAP_SYS_PTRACE would do). Users who have access
+to /dev/userfaultfd can always create userfaultfds that trap kernel page faults;
+vm.unprivileged_userfaultfd is not considered.
+
+Initializing a userfaultfd
+--------------------------
+
 When first opened the ``userfaultfd`` must be enabled invoking the
 ``UFFDIO_API`` ioctl specifying a ``uffdio_api.api`` value set to ``UFFD_API`` (or
 a later API version) which will specify the ``read/POLLIN`` protocol
@@ -186,6 +219,31 @@ former will have ``UFFD_PAGEFAULT_FLAG_WP`` set, the latter
 you still need to supply a page when ``UFFDIO_REGISTER_MODE_MISSING`` was
 used.
 
+Userfaultfd write-protect mode currently behave differently on none ptes
+(when e.g. page is missing) over different types of memories.
+
+For anonymous memory, ``ioctl(UFFDIO_WRITEPROTECT)`` will ignore none ptes
+(e.g. when pages are missing and not populated).  For file-backed memories
+like shmem and hugetlbfs, none ptes will be write protected just like a
+present pte.  In other words, there will be a userfaultfd write fault
+message generated when writing to a missing page on file typed memories,
+as long as the page range was write-protected before.  Such a message will
+not be generated on anonymous memories by default.
+
+If the application wants to be able to write protect none ptes on anonymous
+memory, one can pre-populate the memory with e.g. MADV_POPULATE_READ.  On
+newer kernels, one can also detect the feature UFFD_FEATURE_WP_UNPOPULATED
+and set the feature bit in advance to make sure none ptes will also be
+write protected even upon anonymous memory.
+
+When using ``UFFDIO_REGISTER_MODE_WP`` in combination with either
+``UFFDIO_REGISTER_MODE_MISSING`` or ``UFFDIO_REGISTER_MODE_MINOR``, when
+resolving missing / minor faults with ``UFFDIO_COPY`` or ``UFFDIO_CONTINUE``
+respectively, it may be desirable for the new page / mapping to be
+write-protected (so future writes will also result in a WP fault). These ioctls
+support a mode flag (``UFFDIO_COPY_MODE_WP`` or ``UFFDIO_CONTINUE_MODE_WP``
+respectively) to configure the mapping this way.
+
 QEMU/KVM
 ========
 
diff --git a/Documentation/admin-guide/mm/zswap.rst b/Documentation/admin-guide/mm/zswap.rst
index 8edb8d578caf..c5c2c7dbb155 100644
--- a/Documentation/admin-guide/mm/zswap.rst
+++ b/Documentation/admin-guide/mm/zswap.rst
@@ -1,5 +1,3 @@
-.. _zswap:
-
 =====
 zswap
 =====
@@ -14,13 +12,7 @@ for potentially reduced swap I/O.  This trade-off can also result in a
 significant performance improvement if reads from the compressed cache are
 faster than reads from a swap device.
 
-.. note::
-   Zswap is a new feature as of v3.11 and interacts heavily with memory
-   reclaim.  This interaction has not been fully explored on the large set of
-   potential configurations and workloads that exist.  For this reason, zswap
-   is a work in progress and should be considered experimental.
-
-   Some potential benefits:
+Some potential benefits:
 
 * Desktop/laptop users with limited RAM capacities can mitigate the
   performance impact of swapping.
@@ -76,9 +68,7 @@ e.g. ``zswap.zpool=zbud``. It can also be changed at runtime using the sysfs
 The zbud type zpool allocates exactly 1 page to store 2 compressed pages, which
 means the compression ratio will always be 2:1 or worse (because of half-full
 zbud pages).  The zsmalloc type zpool has a more complex compressed page
-storage method, and it can achieve greater storage densities.  However,
-zsmalloc does not implement compressed page eviction, so once zswap fills it
-cannot evict the oldest page, it can only reject new pages.
+storage method, and it can achieve greater storage densities.
 
 When a swap page is passed from frontswap to zswap, zswap maintains a mapping
 of the swap entry, a combination of the swap type and swap offset, to the zpool
@@ -130,9 +120,25 @@ attribute, e.g.::
 	echo 1 > /sys/module/zswap/parameters/same_filled_pages_enabled
 
 When zswap same-filled page identification is disabled at runtime, it will stop
-checking for the same-value filled pages during store operation. However, the
-existing pages which are marked as same-value filled pages remain stored
-unchanged in zswap until they are either loaded or invalidated.
+checking for the same-value filled pages during store operation.
+In other words, every page will be then considered non-same-value filled.
+However, the existing pages which are marked as same-value filled pages remain
+stored unchanged in zswap until they are either loaded or invalidated.
+
+In some circumstances it might be advantageous to make use of just the zswap
+ability to efficiently store same-filled pages without enabling the whole
+compressed page storage.
+In this case the handling of non-same-value pages by zswap (enabled by default)
+can be disabled by setting the ``non_same_filled_pages_enabled`` attribute
+to 0, e.g. ``zswap.non_same_filled_pages_enabled=0``.
+It can also be enabled and disabled at runtime using the sysfs
+``non_same_filled_pages_enabled`` attribute, e.g.::
+
+	echo 1 > /sys/module/zswap/parameters/non_same_filled_pages_enabled
+
+Disabling both ``zswap.same_filled_pages_enabled`` and
+``zswap.non_same_filled_pages_enabled`` effectively disables accepting any new
+pages by zswap.
 
 To prevent zswap from shrinking pool when zswap is full and there's a high
 pressure on swap (this will result in flipping pages in and out zswap pool
diff --git a/Documentation/admin-guide/nfs/nfs-client.rst b/Documentation/admin-guide/nfs/nfs-client.rst
index 6adb6457bc69..36760685dd34 100644
--- a/Documentation/admin-guide/nfs/nfs-client.rst
+++ b/Documentation/admin-guide/nfs/nfs-client.rst
@@ -36,10 +36,9 @@ administrative requirements that require particular behavior that does not
 work well as part of an nfs_client_id4 string.
 
 The nfs.nfs4_unique_id boot parameter specifies a unique string that can be
-used instead of a system's node name when an NFS client identifies itself to
-a server.  Thus, if the system's node name is not unique, or it changes, its
-nfs.nfs4_unique_id stays the same, preventing collision with other clients
-or loss of state during NFS reboot recovery or transparent state migration.
+used together with  a system's node name when an NFS client identifies itself to
+a server.  Thus, if the system's node name is not unique, its
+nfs.nfs4_unique_id can help prevent collisions with other clients.
 
 The nfs.nfs4_unique_id string is typically a UUID, though it can contain
 anything that is believed to be unique across all NFS clients.  An
@@ -53,8 +52,12 @@ outstanding NFSv4 state has expired, to prevent loss of NFSv4 state.
 
 This string can be stored in an NFS client's grub.conf, or it can be provided
 via a net boot facility such as PXE.  It may also be specified as an nfs.ko
-module parameter.  Specifying a uniquifier string is not support for NFS
-clients running in containers.
+module parameter.
+
+This uniquifier string will be the same for all NFS clients running in
+containers unless it is overridden by a value written to
+/sys/fs/nfs/net/nfs_client/identifier which will be local to the network
+namespace of the process which writes.
 
 
 The DNS resolver
diff --git a/Documentation/admin-guide/perf/alibaba_pmu.rst b/Documentation/admin-guide/perf/alibaba_pmu.rst
new file mode 100644
index 000000000000..11de998bb480
--- /dev/null
+++ b/Documentation/admin-guide/perf/alibaba_pmu.rst
@@ -0,0 +1,100 @@
+=============================================================
+Alibaba's T-Head SoC Uncore Performance Monitoring Unit (PMU)
+=============================================================
+
+The Yitian 710, custom-built by Alibaba Group's chip development business,
+T-Head, implements uncore PMU for performance and functional debugging to
+facilitate system maintenance.
+
+DDR Sub-System Driveway (DRW) PMU Driver
+=========================================
+
+Yitian 710 employs eight DDR5/4 channels, four on each die. Each DDR5 channel
+is independent of others to service system memory requests. And one DDR5
+channel is split into two independent sub-channels. The DDR Sub-System Driveway
+implements separate PMUs for each sub-channel to monitor various performance
+metrics.
+
+The Driveway PMU devices are named as ali_drw_<sys_base_addr> with perf.
+For example, ali_drw_21000 and ali_drw_21080 are two PMU devices for two
+sub-channels of the same channel in die 0. And the PMU device of die 1 is
+prefixed with ali_drw_400XXXXX, e.g. ali_drw_40021000.
+
+Each sub-channel has 36 PMU counters in total, which is classified into
+four groups:
+
+- Group 0: PMU Cycle Counter. This group has one pair of counters
+  pmu_cycle_cnt_low and pmu_cycle_cnt_high, that is used as the cycle count
+  based on DDRC core clock.
+
+- Group 1: PMU Bandwidth Counters. This group has 8 counters that are used
+  to count the total access number of either the eight bank groups in a
+  selected rank, or four ranks separately in the first 4 counters. The base
+  transfer unit is 64B.
+
+- Group 2: PMU Retry Counters. This group has 10 counters, that intend to
+  count the total retry number of each type of uncorrectable error.
+
+- Group 3: PMU Common Counters. This group has 16 counters, that are used
+  to count the common events.
+
+For now, the Driveway PMU driver only uses counters in group 0 and group 3.
+
+The DDR Controller (DDRCTL) and DDR PHY combine to create a complete solution
+for connecting an SoC application bus to DDR memory devices. The DDRCTL
+receives transactions Host Interface (HIF) which is custom-defined by Synopsys.
+These transactions are queued internally and scheduled for access while
+satisfying the SDRAM protocol timing requirements, transaction priorities, and
+dependencies between the transactions. The DDRCTL in turn issues commands on
+the DDR PHY Interface (DFI) to the PHY module, which launches and captures data
+to and from the SDRAM. The driveway PMUs have hardware logic to gather
+statistics and performance logging signals on HIF, DFI, etc.
+
+By counting the READ, WRITE and RMW commands sent to the DDRC through the HIF
+interface, we could calculate the bandwidth. Example usage of counting memory
+data bandwidth::
+
+  perf stat \
+    -e ali_drw_21000/hif_wr/ \
+    -e ali_drw_21000/hif_rd/ \
+    -e ali_drw_21000/hif_rmw/ \
+    -e ali_drw_21000/cycle/ \
+    -e ali_drw_21080/hif_wr/ \
+    -e ali_drw_21080/hif_rd/ \
+    -e ali_drw_21080/hif_rmw/ \
+    -e ali_drw_21080/cycle/ \
+    -e ali_drw_23000/hif_wr/ \
+    -e ali_drw_23000/hif_rd/ \
+    -e ali_drw_23000/hif_rmw/ \
+    -e ali_drw_23000/cycle/ \
+    -e ali_drw_23080/hif_wr/ \
+    -e ali_drw_23080/hif_rd/ \
+    -e ali_drw_23080/hif_rmw/ \
+    -e ali_drw_23080/cycle/ \
+    -e ali_drw_25000/hif_wr/ \
+    -e ali_drw_25000/hif_rd/ \
+    -e ali_drw_25000/hif_rmw/ \
+    -e ali_drw_25000/cycle/ \
+    -e ali_drw_25080/hif_wr/ \
+    -e ali_drw_25080/hif_rd/ \
+    -e ali_drw_25080/hif_rmw/ \
+    -e ali_drw_25080/cycle/ \
+    -e ali_drw_27000/hif_wr/ \
+    -e ali_drw_27000/hif_rd/ \
+    -e ali_drw_27000/hif_rmw/ \
+    -e ali_drw_27000/cycle/ \
+    -e ali_drw_27080/hif_wr/ \
+    -e ali_drw_27080/hif_rd/ \
+    -e ali_drw_27080/hif_rmw/ \
+    -e ali_drw_27080/cycle/ -- sleep 10
+
+The average DRAM bandwidth can be calculated as follows:
+
+- Read Bandwidth =  perf_hif_rd * DDRC_WIDTH * DDRC_Freq / DDRC_Cycle
+- Write Bandwidth = (perf_hif_wr + perf_hif_rmw) * DDRC_WIDTH * DDRC_Freq / DDRC_Cycle
+
+Here, DDRC_WIDTH = 64 bytes.
+
+The current driver does not support sampling. So "perf record" is
+unsupported.  Also attach to a task is unsupported as the events are all
+uncore.
diff --git a/Documentation/admin-guide/perf/hisi-pcie-pmu.rst b/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
new file mode 100644
index 000000000000..7e863662e2d4
--- /dev/null
+++ b/Documentation/admin-guide/perf/hisi-pcie-pmu.rst
@@ -0,0 +1,130 @@
+================================================
+HiSilicon PCIe Performance Monitoring Unit (PMU)
+================================================
+
+On Hip09, HiSilicon PCIe Performance Monitoring Unit (PMU) could monitor
+bandwidth, latency, bus utilization and buffer occupancy data of PCIe.
+
+Each PCIe Core has a PMU to monitor multi Root Ports of this PCIe Core and
+all Endpoints downstream these Root Ports.
+
+
+HiSilicon PCIe PMU driver
+=========================
+
+The PCIe PMU driver registers a perf PMU with the name of its sicl-id and PCIe
+Core id.::
+
+  /sys/bus/event_source/hisi_pcie<sicl>_core<core>
+
+PMU driver provides description of available events and filter options in sysfs,
+see /sys/bus/event_source/devices/hisi_pcie<sicl>_core<core>.
+
+The "format" directory describes all formats of the config (events) and config1
+(filter options) fields of the perf_event_attr structure. The "events" directory
+describes all documented events shown in perf list.
+
+The "identifier" sysfs file allows users to identify the version of the
+PMU hardware device.
+
+The "bus" sysfs file allows users to get the bus number of Root Ports
+monitored by PMU.
+
+Example usage of perf::
+
+  $# perf list
+  hisi_pcie0_core0/rx_mwr_latency/ [kernel PMU event]
+  hisi_pcie0_core0/rx_mwr_cnt/ [kernel PMU event]
+  ------------------------------------------
+
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_latency/
+  $# perf stat -e hisi_pcie0_core0/rx_mwr_cnt/
+  $# perf stat -g -e hisi_pcie0_core0/rx_mwr_latency/ -e hisi_pcie0_core0/rx_mwr_cnt/
+
+The current driver does not support sampling. So "perf record" is unsupported.
+Also attach to a task is unsupported for PCIe PMU.
+
+Filter options
+--------------
+
+1. Target filter
+
+   PMU could only monitor the performance of traffic downstream target Root
+   Ports or downstream target Endpoint. PCIe PMU driver support "port" and
+   "bdf" interfaces for users, and these two interfaces aren't supported at the
+   same time.
+
+   - port
+
+     "port" filter can be used in all PCIe PMU events, target Root Port can be
+     selected by configuring the 16-bits-bitmap "port". Multi ports can be
+     selected for AP-layer-events, and only one port can be selected for
+     TL/DL-layer-events.
+
+     For example, if target Root Port is 0000:00:00.0 (x8 lanes), bit0 of
+     bitmap should be set, port=0x1; if target Root Port is 0000:00:04.0 (x4
+     lanes), bit8 is set, port=0x100; if these two Root Ports are both
+     monitored, port=0x101.
+
+     Example usage of perf::
+
+       $# perf stat -e hisi_pcie0_core0/rx_mwr_latency,port=0x1/ sleep 5
+
+   - bdf
+
+     "bdf" filter can only be used in bandwidth events, target Endpoint is
+     selected by configuring BDF to "bdf". Counter only counts the bandwidth of
+     message requested by target Endpoint.
+
+     For example, "bdf=0x3900" means BDF of target Endpoint is 0000:39:00.0.
+
+     Example usage of perf::
+
+       $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,bdf=0x3900/ sleep 5
+
+2. Trigger filter
+
+   Event statistics start when the first time TLP length is greater/smaller
+   than trigger condition. You can set the trigger condition by writing
+   "trig_len", and set the trigger mode by writing "trig_mode". This filter can
+   only be used in bandwidth events.
+
+   For example, "trig_len=4" means trigger condition is 2^4 DW, "trig_mode=0"
+   means statistics start when TLP length > trigger condition, "trig_mode=1"
+   means start when TLP length < condition.
+
+   Example usage of perf::
+
+     $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,trig_len=0x4,trig_mode=1/ sleep 5
+
+3. Threshold filter
+
+   Counter counts when TLP length within the specified range. You can set the
+   threshold by writing "thr_len", and set the threshold mode by writing
+   "thr_mode". This filter can only be used in bandwidth events.
+
+   For example, "thr_len=4" means threshold is 2^4 DW, "thr_mode=0" means
+   counter counts when TLP length >= threshold, and "thr_mode=1" means counts
+   when TLP length < threshold.
+
+   Example usage of perf::
+
+     $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,thr_len=0x4,thr_mode=1/ sleep 5
+
+4. TLP Length filter
+
+   When counting bandwidth, the data can be composed of certain parts of TLP
+   packets. You can specify it through "len_mode":
+
+   - 2'b00: Reserved (Do not use this since the behaviour is undefined)
+   - 2'b01: Bandwidth of TLP payloads
+   - 2'b10: Bandwidth of TLP headers
+   - 2'b11: Bandwidth of both TLP payloads and headers
+
+   For example, "len_mode=2" means only counting the bandwidth of TLP headers
+   and "len_mode=3" means the final bandwidth data is composed of both TLP
+   headers and payloads. Default value if not specified is 2'b11.
+
+   Example usage of perf::
+
+     $# perf stat -e hisi_pcie0_core0/rx_mrd_flux,len_mode=0x1/ sleep 5
diff --git a/Documentation/admin-guide/perf/hns3-pmu.rst b/Documentation/admin-guide/perf/hns3-pmu.rst
new file mode 100644
index 000000000000..75a40846d47f
--- /dev/null
+++ b/Documentation/admin-guide/perf/hns3-pmu.rst
@@ -0,0 +1,136 @@
+======================================
+HNS3 Performance Monitoring Unit (PMU)
+======================================
+
+HNS3(HiSilicon network system 3) Performance Monitoring Unit (PMU) is an
+End Point device to collect performance statistics of HiSilicon SoC NIC.
+On Hip09, each SICL(Super I/O cluster) has one PMU device.
+
+HNS3 PMU supports collection of performance statistics such as bandwidth,
+latency, packet rate and interrupt rate.
+
+Each HNS3 PMU supports 8 hardware events.
+
+HNS3 PMU driver
+===============
+
+The HNS3 PMU driver registers a perf PMU with the name of its sicl id.::
+
+  /sys/devices/hns3_pmu_sicl_<sicl_id>
+
+PMU driver provides description of available events, filter modes, format,
+identifier and cpumask in sysfs.
+
+The "events" directory describes the event code of all supported events
+shown in perf list.
+
+The "filtermode" directory describes the supported filter modes of each
+event.
+
+The "format" directory describes all formats of the config (events) and
+config1 (filter options) fields of the perf_event_attr structure.
+
+The "identifier" file shows version of PMU hardware device.
+
+The "bdf_min" and "bdf_max" files show the supported bdf range of each
+pmu device.
+
+The "hw_clk_freq" file shows the hardware clock frequency of each pmu
+device.
+
+Example usage of checking event code and subevent code::
+
+  $# cat /sys/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_time
+  config=0x00204
+  $# cat /sys/devices/hns3_pmu_sicl_0/events/dly_tx_normal_to_mac_packet_num
+  config=0x10204
+
+Each performance statistic has a pair of events to get two values to
+calculate real performance data in userspace.
+
+The bits 0~15 of config (here 0x0204) are the true hardware event code. If
+two events have same value of bits 0~15 of config, that means they are
+event pair. And the bit 16 of config indicates getting counter 0 or
+counter 1 of hardware event.
+
+After getting two values of event pair in userspace, the formula of
+computation to calculate real performance data is:::
+
+  counter 0 / counter 1
+
+Example usage of checking supported filter mode::
+
+  $# cat /sys/devices/hns3_pmu_sicl_0/filtermode/bw_ssu_rpu_byte_num
+  filter mode supported: global/port/port-tc/func/func-queue/
+
+Example usage of perf::
+
+  $# perf list
+  hns3_pmu_sicl_0/bw_ssu_rpu_byte_num/ [kernel PMU event]
+  hns3_pmu_sicl_0/bw_ssu_rpu_time/     [kernel PMU event]
+  ------------------------------------------
+
+  $# perf stat -g -e hns3_pmu_sicl_0/bw_ssu_rpu_byte_num,global=1/ -e hns3_pmu_sicl_0/bw_ssu_rpu_time,global=1/ -I 1000
+  or
+  $# perf stat -g -e hns3_pmu_sicl_0/config=0x00002,global=1/ -e hns3_pmu_sicl_0/config=0x10002,global=1/ -I 1000
+
+
+Filter modes
+--------------
+
+1. global mode
+PMU collect performance statistics for all HNS3 PCIe functions of IO DIE.
+Set the "global" filter option to 1 will enable this mode.
+Example usage of perf::
+
+  $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,global=1/ -I 1000
+
+2. port mode
+PMU collect performance statistic of one whole physical port. The port id
+is same as mac id. The "tc" filter option must be set to 0xF in this mode,
+here tc stands for traffic class.
+
+Example usage of perf::
+
+  $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,port=0,tc=0xF/ -I 1000
+
+3. port-tc mode
+PMU collect performance statistic of one tc of physical port. The port id
+is same as mac id. The "tc" filter option must be set to 0 ~ 7 in this
+mode.
+Example usage of perf::
+
+  $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,port=0,tc=0/ -I 1000
+
+4. func mode
+PMU collect performance statistic of one PF/VF. The function id is BDF of
+PF/VF, its conversion formula::
+
+  func = (bus << 8) + (device << 3) + (function)
+
+for example:
+  BDF         func
+  35:00.0    0x3500
+  35:00.1    0x3501
+  35:01.0    0x3508
+
+In this mode, the "queue" filter option must be set to 0xFFFF.
+Example usage of perf::
+
+  $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,bdf=0x3500,queue=0xFFFF/ -I 1000
+
+5. func-queue mode
+PMU collect performance statistic of one queue of PF/VF. The function id
+is BDF of PF/VF, the "queue" filter option must be set to the exact queue
+id of function.
+Example usage of perf::
+
+  $# perf stat -a -e hns3_pmu_sicl_0/config=0x1020F,bdf=0x3500,queue=0/ -I 1000
+
+6. func-intr mode
+PMU collect performance statistic of one interrupt of PF/VF. The function
+id is BDF of PF/VF, the "intr" filter option must be set to the exact
+interrupt id of function.
+Example usage of perf::
+
+  $# perf stat -a -e hns3_pmu_sicl_0/config=0x00301,bdf=0x3500,intr=0/ -I 1000
diff --git a/Documentation/admin-guide/perf/index.rst b/Documentation/admin-guide/perf/index.rst
index 5a8f2529a033..9de64a40adab 100644
--- a/Documentation/admin-guide/perf/index.rst
+++ b/Documentation/admin-guide/perf/index.rst
@@ -8,6 +8,8 @@ Performance monitor support
    :maxdepth: 1
 
    hisi-pmu
+   hisi-pcie-pmu
+   hns3-pmu
    imx-ddr
    qcom_l2_pmu
    qcom_l3_pmu
@@ -16,3 +18,6 @@ Performance monitor support
    xgene-pmu
    arm_dsu_pmu
    thunderx2-pmu
+   alibaba_pmu
+   nvidia-pmu
+   meson-ddr-pmu
diff --git a/Documentation/admin-guide/perf/meson-ddr-pmu.rst b/Documentation/admin-guide/perf/meson-ddr-pmu.rst
new file mode 100644
index 000000000000..8e71be1d6346
--- /dev/null
+++ b/Documentation/admin-guide/perf/meson-ddr-pmu.rst
@@ -0,0 +1,70 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================================================
+Amlogic SoC DDR Bandwidth Performance Monitoring Unit (PMU)
+===========================================================
+
+The Amlogic Meson G12 SoC contains a bandwidth monitor inside DRAM controller.
+The monitor includes 4 channels. Each channel can count the request accessing
+DRAM. The channel can count up to 3 AXI port simultaneously. It can be helpful
+to show if the performance bottleneck is on DDR bandwidth.
+
+Currently, this driver supports the following 5 perf events:
+
++ meson_ddr_bw/total_rw_bytes/
++ meson_ddr_bw/chan_1_rw_bytes/
++ meson_ddr_bw/chan_2_rw_bytes/
++ meson_ddr_bw/chan_3_rw_bytes/
++ meson_ddr_bw/chan_4_rw_bytes/
+
+meson_ddr_bw/chan_{1,2,3,4}_rw_bytes/ events are channel-specific events.
+Each channel support filtering, which can let the channel to monitor
+individual IP module in SoC.
+
+Below are DDR access request event filter keywords:
+
++ arm             - from CPU
++ vpu_read1       - from OSD + VPP read
++ gpu             - from 3D GPU
++ pcie            - from PCIe controller
++ hdcp            - from HDCP controller
++ hevc_front      - from HEVC codec front end
++ usb3_0          - from USB3.0 controller
++ hevc_back       - from HEVC codec back end
++ h265enc         - from HEVC encoder
++ vpu_read2       - from DI read
++ vpu_write1      - from VDIN write
++ vpu_write2      - from di write
++ vdec            - from legacy codec video decoder
++ hcodec          - from H264 encoder
++ ge2d            - from ge2d
++ spicc1          - from SPI controller 1
++ usb0            - from USB2.0 controller 0
++ dma             - from system DMA controller 1
++ arb0            - from arb0
++ sd_emmc_b       - from SD eMMC b controller
++ usb1            - from USB2.0 controller 1
++ audio           - from Audio module
++ sd_emmc_c       - from SD eMMC c controller
++ spicc2          - from SPI controller 2
++ ethernet        - from Ethernet controller
+
+
+Examples:
+
+  + Show the total DDR bandwidth per seconds:
+
+    .. code-block:: bash
+
+       perf stat -a -e meson_ddr_bw/total_rw_bytes/ -I 1000 sleep 10
+
+
+  + Show individual DDR bandwidth from CPU and GPU respectively, as well as
+    sum of them:
+
+    .. code-block:: bash
+
+       perf stat -a -e meson_ddr_bw/chan_1_rw_bytes,arm=1/ -I 1000 sleep 10
+       perf stat -a -e meson_ddr_bw/chan_2_rw_bytes,gpu=1/ -I 1000 sleep 10
+       perf stat -a -e meson_ddr_bw/chan_3_rw_bytes,arm=1,gpu=1/ -I 1000 sleep 10
+
diff --git a/Documentation/admin-guide/perf/nvidia-pmu.rst b/Documentation/admin-guide/perf/nvidia-pmu.rst
new file mode 100644
index 000000000000..2e0d47cfe7ea
--- /dev/null
+++ b/Documentation/admin-guide/perf/nvidia-pmu.rst
@@ -0,0 +1,299 @@
+=========================================================
+NVIDIA Tegra SoC Uncore Performance Monitoring Unit (PMU)
+=========================================================
+
+The NVIDIA Tegra SoC includes various system PMUs to measure key performance
+metrics like memory bandwidth, latency, and utilization:
+
+* Scalable Coherency Fabric (SCF)
+* NVLink-C2C0
+* NVLink-C2C1
+* CNVLink
+* PCIE
+
+PMU Driver
+----------
+
+The PMUs in this document are based on ARM CoreSight PMU Architecture as
+described in document: ARM IHI 0091. Since this is a standard architecture, the
+PMUs are managed by a common driver "arm-cs-arch-pmu". This driver describes
+the available events and configuration of each PMU in sysfs. Please see the
+sections below to get the sysfs path of each PMU. Like other uncore PMU drivers,
+the driver provides "cpumask" sysfs attribute to show the CPU id used to handle
+the PMU event. There is also "associated_cpus" sysfs attribute, which contains a
+list of CPUs associated with the PMU instance.
+
+.. _SCF_PMU_Section:
+
+SCF PMU
+-------
+
+The SCF PMU monitors system level cache events, CPU traffic, and
+strongly-ordered (SO) PCIE write traffic to local/remote memory. Please see
+:ref:`NVIDIA_Uncore_PMU_Traffic_Coverage_Section` for more info about the PMU
+traffic coverage.
+
+The events and configuration options of this PMU device are described in sysfs,
+see /sys/bus/event_sources/devices/nvidia_scf_pmu_<socket-id>.
+
+Example usage:
+
+* Count event id 0x0 in socket 0::
+
+   perf stat -a -e nvidia_scf_pmu_0/event=0x0/
+
+* Count event id 0x0 in socket 1::
+
+   perf stat -a -e nvidia_scf_pmu_1/event=0x0/
+
+NVLink-C2C0 PMU
+--------------------
+
+The NVLink-C2C0 PMU monitors incoming traffic from a GPU/CPU connected with
+NVLink-C2C (Chip-2-Chip) interconnect. The type of traffic captured by this PMU
+varies dependent on the chip configuration:
+
+* NVIDIA Grace Hopper Superchip: Hopper GPU is connected with Grace SoC.
+
+  In this config, the PMU captures GPU ATS translated or EGM traffic from the GPU.
+
+* NVIDIA Grace CPU Superchip: two Grace CPU SoCs are connected.
+
+  In this config, the PMU captures read and relaxed ordered (RO) writes from
+  PCIE device of the remote SoC.
+
+Please see :ref:`NVIDIA_Uncore_PMU_Traffic_Coverage_Section` for more info about
+the PMU traffic coverage.
+
+The events and configuration options of this PMU device are described in sysfs,
+see /sys/bus/event_sources/devices/nvidia_nvlink_c2c0_pmu_<socket-id>.
+
+Example usage:
+
+* Count event id 0x0 from the GPU/CPU connected with socket 0::
+
+   perf stat -a -e nvidia_nvlink_c2c0_pmu_0/event=0x0/
+
+* Count event id 0x0 from the GPU/CPU connected with socket 1::
+
+   perf stat -a -e nvidia_nvlink_c2c0_pmu_1/event=0x0/
+
+* Count event id 0x0 from the GPU/CPU connected with socket 2::
+
+   perf stat -a -e nvidia_nvlink_c2c0_pmu_2/event=0x0/
+
+* Count event id 0x0 from the GPU/CPU connected with socket 3::
+
+   perf stat -a -e nvidia_nvlink_c2c0_pmu_3/event=0x0/
+
+NVLink-C2C1 PMU
+-------------------
+
+The NVLink-C2C1 PMU monitors incoming traffic from a GPU connected with
+NVLink-C2C (Chip-2-Chip) interconnect. This PMU captures untranslated GPU
+traffic, in contrast with NvLink-C2C0 PMU that captures ATS translated traffic.
+Please see :ref:`NVIDIA_Uncore_PMU_Traffic_Coverage_Section` for more info about
+the PMU traffic coverage.
+
+The events and configuration options of this PMU device are described in sysfs,
+see /sys/bus/event_sources/devices/nvidia_nvlink_c2c1_pmu_<socket-id>.
+
+Example usage:
+
+* Count event id 0x0 from the GPU connected with socket 0::
+
+   perf stat -a -e nvidia_nvlink_c2c1_pmu_0/event=0x0/
+
+* Count event id 0x0 from the GPU connected with socket 1::
+
+   perf stat -a -e nvidia_nvlink_c2c1_pmu_1/event=0x0/
+
+* Count event id 0x0 from the GPU connected with socket 2::
+
+   perf stat -a -e nvidia_nvlink_c2c1_pmu_2/event=0x0/
+
+* Count event id 0x0 from the GPU connected with socket 3::
+
+   perf stat -a -e nvidia_nvlink_c2c1_pmu_3/event=0x0/
+
+CNVLink PMU
+---------------
+
+The CNVLink PMU monitors traffic from GPU and PCIE device on remote sockets
+to local memory. For PCIE traffic, this PMU captures read and relaxed ordered
+(RO) write traffic. Please see :ref:`NVIDIA_Uncore_PMU_Traffic_Coverage_Section`
+for more info about the PMU traffic coverage.
+
+The events and configuration options of this PMU device are described in sysfs,
+see /sys/bus/event_sources/devices/nvidia_cnvlink_pmu_<socket-id>.
+
+Each SoC socket can be connected to one or more sockets via CNVLink. The user can
+use "rem_socket" bitmap parameter to select the remote socket(s) to monitor.
+Each bit represents the socket number, e.g. "rem_socket=0xE" corresponds to
+socket 1 to 3.
+/sys/bus/event_sources/devices/nvidia_cnvlink_pmu_<socket-id>/format/rem_socket
+shows the valid bits that can be set in the "rem_socket" parameter.
+
+The PMU can not distinguish the remote traffic initiator, therefore it does not
+provide filter to select the traffic source to monitor. It reports combined
+traffic from remote GPU and PCIE devices.
+
+Example usage:
+
+* Count event id 0x0 for the traffic from remote socket 1, 2, and 3 to socket 0::
+
+   perf stat -a -e nvidia_cnvlink_pmu_0/event=0x0,rem_socket=0xE/
+
+* Count event id 0x0 for the traffic from remote socket 0, 2, and 3 to socket 1::
+
+   perf stat -a -e nvidia_cnvlink_pmu_1/event=0x0,rem_socket=0xD/
+
+* Count event id 0x0 for the traffic from remote socket 0, 1, and 3 to socket 2::
+
+   perf stat -a -e nvidia_cnvlink_pmu_2/event=0x0,rem_socket=0xB/
+
+* Count event id 0x0 for the traffic from remote socket 0, 1, and 2 to socket 3::
+
+   perf stat -a -e nvidia_cnvlink_pmu_3/event=0x0,rem_socket=0x7/
+
+
+PCIE PMU
+------------
+
+The PCIE PMU monitors all read/write traffic from PCIE root ports to
+local/remote memory. Please see :ref:`NVIDIA_Uncore_PMU_Traffic_Coverage_Section`
+for more info about the PMU traffic coverage.
+
+The events and configuration options of this PMU device are described in sysfs,
+see /sys/bus/event_sources/devices/nvidia_pcie_pmu_<socket-id>.
+
+Each SoC socket can support multiple root ports. The user can use
+"root_port" bitmap parameter to select the port(s) to monitor, i.e.
+"root_port=0xF" corresponds to root port 0 to 3.
+/sys/bus/event_sources/devices/nvidia_pcie_pmu_<socket-id>/format/root_port
+shows the valid bits that can be set in the "root_port" parameter.
+
+Example usage:
+
+* Count event id 0x0 from root port 0 and 1 of socket 0::
+
+   perf stat -a -e nvidia_pcie_pmu_0/event=0x0,root_port=0x3/
+
+* Count event id 0x0 from root port 0 and 1 of socket 1::
+
+   perf stat -a -e nvidia_pcie_pmu_1/event=0x0,root_port=0x3/
+
+.. _NVIDIA_Uncore_PMU_Traffic_Coverage_Section:
+
+Traffic Coverage
+----------------
+
+The PMU traffic coverage may vary dependent on the chip configuration:
+
+* **NVIDIA Grace Hopper Superchip**: Hopper GPU is connected with Grace SoC.
+
+  Example configuration with two Grace SoCs::
+
+   *********************************          *********************************
+   * SOCKET-A                      *          * SOCKET-B                      *
+   *                               *          *                               *
+   *                     ::::::::  *          *  ::::::::                     *
+   *                     : PCIE :  *          *  : PCIE :                     *
+   *                     ::::::::  *          *  ::::::::                     *
+   *                         |     *          *      |                        *
+   *                         |     *          *      |                        *
+   *  :::::::            ::::::::: *          *  :::::::::            ::::::: *
+   *  :     :            :       : *          *  :       :            :     : *
+   *  : GPU :<--NVLink-->: Grace :<---CNVLink--->: Grace :<--NVLink-->: GPU : *
+   *  :     :    C2C     :  SoC  : *          *  :  SoC  :    C2C     :     : *
+   *  :::::::            ::::::::: *          *  :::::::::            ::::::: *
+   *     |                   |     *          *      |                   |    *
+   *     |                   |     *          *      |                   |    *
+   *  &&&&&&&&           &&&&&&&&  *          *   &&&&&&&&           &&&&&&&& *
+   *  & GMEM &           & CMEM &  *          *   & CMEM &           & GMEM & *
+   *  &&&&&&&&           &&&&&&&&  *          *   &&&&&&&&           &&&&&&&& *
+   *                               *          *                               *
+   *********************************          *********************************
+
+   GMEM = GPU Memory (e.g. HBM)
+   CMEM = CPU Memory (e.g. LPDDR5X)
+
+  |
+  | Following table contains traffic coverage of Grace SoC PMU in socket-A:
+
+  ::
+
+   +--------------+-------+-----------+-----------+-----+----------+----------+
+   |              |                        Source                             |
+   +              +-------+-----------+-----------+-----+----------+----------+
+   | Destination  |       |GPU ATS    |GPU Not-ATS|     | Socket-B | Socket-B |
+   |              |PCI R/W|Translated,|Translated | CPU | CPU/PCIE1| GPU/PCIE2|
+   |              |       |EGM        |           |     |          |          |
+   +==============+=======+===========+===========+=====+==========+==========+
+   | Local        | PCIE  |NVLink-C2C0|NVLink-C2C1| SCF | SCF PMU  | CNVLink  |
+   | SYSRAM/CMEM  | PMU   |PMU        |PMU        | PMU |          | PMU      |
+   +--------------+-------+-----------+-----------+-----+----------+----------+
+   | Local GMEM   | PCIE  |    N/A    |NVLink-C2C1| SCF | SCF PMU  | CNVLink  |
+   |              | PMU   |           |PMU        | PMU |          | PMU      |
+   +--------------+-------+-----------+-----------+-----+----------+----------+
+   | Remote       | PCIE  |NVLink-C2C0|NVLink-C2C1| SCF |          |          |
+   | SYSRAM/CMEM  | PMU   |PMU        |PMU        | PMU |   N/A    |   N/A    |
+   | over CNVLink |       |           |           |     |          |          |
+   +--------------+-------+-----------+-----------+-----+----------+----------+
+   | Remote GMEM  | PCIE  |NVLink-C2C0|NVLink-C2C1| SCF |          |          |
+   | over CNVLink | PMU   |PMU        |PMU        | PMU |   N/A    |   N/A    |
+   +--------------+-------+-----------+-----------+-----+----------+----------+
+
+   PCIE1 traffic represents strongly ordered (SO) writes.
+   PCIE2 traffic represents reads and relaxed ordered (RO) writes.
+
+* **NVIDIA Grace CPU Superchip**: two Grace CPU SoCs are connected.
+
+  Example configuration with two Grace SoCs::
+
+   *******************             *******************
+   * SOCKET-A        *             * SOCKET-B        *
+   *                 *             *                 *
+   *    ::::::::     *             *    ::::::::     *
+   *    : PCIE :     *             *    : PCIE :     *
+   *    ::::::::     *             *    ::::::::     *
+   *        |        *             *        |        *
+   *        |        *             *        |        *
+   *    :::::::::    *             *    :::::::::    *
+   *    :       :    *             *    :       :    *
+   *    : Grace :<--------NVLink------->: Grace :    *
+   *    :  SoC  :    *     C2C     *    :  SoC  :    *
+   *    :::::::::    *             *    :::::::::    *
+   *        |        *             *        |        *
+   *        |        *             *        |        *
+   *     &&&&&&&&    *             *     &&&&&&&&    *
+   *     & CMEM &    *             *     & CMEM &    *
+   *     &&&&&&&&    *             *     &&&&&&&&    *
+   *                 *             *                 *
+   *******************             *******************
+
+   GMEM = GPU Memory (e.g. HBM)
+   CMEM = CPU Memory (e.g. LPDDR5X)
+
+  |
+  | Following table contains traffic coverage of Grace SoC PMU in socket-A:
+
+  ::
+
+   +-----------------+-----------+---------+----------+-------------+
+   |                 |                      Source                  |
+   +                 +-----------+---------+----------+-------------+
+   | Destination     |           |         | Socket-B | Socket-B    |
+   |                 |  PCI R/W  |   CPU   | CPU/PCIE1| PCIE2       |
+   |                 |           |         |          |             |
+   +=================+===========+=========+==========+=============+
+   | Local           |  PCIE PMU | SCF PMU | SCF PMU  | NVLink-C2C0 |
+   | SYSRAM/CMEM     |           |         |          | PMU         |
+   +-----------------+-----------+---------+----------+-------------+
+   | Remote          |           |         |          |             |
+   | SYSRAM/CMEM     |  PCIE PMU | SCF PMU |   N/A    |     N/A     |
+   | over NVLink-C2C |           |         |          |             |
+   +-----------------+-----------+---------+----------+-------------+
+
+   PCIE1 traffic represents strongly ordered (SO) writes.
+   PCIE2 traffic represents reads and relaxed ordered (RO) writes.
diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst
new file mode 100644
index 000000000000..1cf40f69278c
--- /dev/null
+++ b/Documentation/admin-guide/pm/amd-pstate.rst
@@ -0,0 +1,720 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+===============================================
+``amd-pstate`` CPU Performance Scaling Driver
+===============================================
+
+:Copyright: |copy| 2021 Advanced Micro Devices, Inc.
+
+:Author: Huang Rui <ray.huang@amd.com>
+
+
+Introduction
+===================
+
+``amd-pstate`` is the AMD CPU performance scaling driver that introduces a
+new CPU frequency control mechanism on modern AMD APU and CPU series in
+Linux kernel. The new mechanism is based on Collaborative Processor
+Performance Control (CPPC) which provides finer grain frequency management
+than legacy ACPI hardware P-States. Current AMD CPU/APU platforms are using
+the ACPI P-states driver to manage CPU frequency and clocks with switching
+only in 3 P-states. CPPC replaces the ACPI P-states controls and allows a
+flexible, low-latency interface for the Linux kernel to directly
+communicate the performance hints to hardware.
+
+``amd-pstate`` leverages the Linux kernel governors such as ``schedutil``,
+``ondemand``, etc. to manage the performance hints which are provided by
+CPPC hardware functionality that internally follows the hardware
+specification (for details refer to AMD64 Architecture Programmer's Manual
+Volume 2: System Programming [1]_). Currently, ``amd-pstate`` supports basic
+frequency control function according to kernel governors on some of the
+Zen2 and Zen3 processors, and we will implement more AMD specific functions
+in future after we verify them on the hardware and SBIOS.
+
+
+AMD CPPC Overview
+=======================
+
+Collaborative Processor Performance Control (CPPC) interface enumerates a
+continuous, abstract, and unit-less performance value in a scale that is
+not tied to a specific performance state / frequency. This is an ACPI
+standard [2]_ which software can specify application performance goals and
+hints as a relative target to the infrastructure limits. AMD processors
+provide the low latency register model (MSR) instead of an AML code
+interpreter for performance adjustments. ``amd-pstate`` will initialize a
+``struct cpufreq_driver`` instance, ``amd_pstate_driver``, with the callbacks
+to manage each performance update behavior. ::
+
+ Highest Perf ------>+-----------------------+                         +-----------------------+
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |          Max Perf  ---->|                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+ Nominal Perf ------>+-----------------------+                         +-----------------------+
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |      Desired Perf  ---->|                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+  Lowest non-        |                       |                         |                       |
+  linear perf ------>+-----------------------+                         +-----------------------+
+                     |                       |                         |                       |
+                     |                       |       Lowest perf  ---->|                       |
+                     |                       |                         |                       |
+  Lowest perf ------>+-----------------------+                         +-----------------------+
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+                     |                       |                         |                       |
+          0   ------>+-----------------------+                         +-----------------------+
+
+                                     AMD P-States Performance Scale
+
+
+.. _perf_cap:
+
+AMD CPPC Performance Capability
+--------------------------------
+
+Highest Performance (RO)
+.........................
+
+This is the absolute maximum performance an individual processor may reach,
+assuming ideal conditions. This performance level may not be sustainable
+for long durations and may only be achievable if other platform components
+are in a specific state; for example, it may require other processors to be in
+an idle state. This would be equivalent to the highest frequencies
+supported by the processor.
+
+Nominal (Guaranteed) Performance (RO)
+......................................
+
+This is the maximum sustained performance level of the processor, assuming
+ideal operating conditions. In the absence of an external constraint (power,
+thermal, etc.), this is the performance level the processor is expected to
+be able to maintain continuously. All cores/processors are expected to be
+able to sustain their nominal performance state simultaneously.
+
+Lowest non-linear Performance (RO)
+...................................
+
+This is the lowest performance level at which nonlinear power savings are
+achieved, for example, due to the combined effects of voltage and frequency
+scaling. Above this threshold, lower performance levels should be generally
+more energy efficient than higher performance levels. This register
+effectively conveys the most efficient performance level to ``amd-pstate``.
+
+Lowest Performance (RO)
+........................
+
+This is the absolute lowest performance level of the processor. Selecting a
+performance level lower than the lowest nonlinear performance level may
+cause an efficiency penalty but should reduce the instantaneous power
+consumption of the processor.
+
+AMD CPPC Performance Control
+------------------------------
+
+``amd-pstate`` passes performance goals through these registers. The
+register drives the behavior of the desired performance target.
+
+Minimum requested performance (RW)
+...................................
+
+``amd-pstate`` specifies the minimum allowed performance level.
+
+Maximum requested performance (RW)
+...................................
+
+``amd-pstate`` specifies a limit the maximum performance that is expected
+to be supplied by the hardware.
+
+Desired performance target (RW)
+...................................
+
+``amd-pstate`` specifies a desired target in the CPPC performance scale as
+a relative number. This can be expressed as percentage of nominal
+performance (infrastructure max). Below the nominal sustained performance
+level, desired performance expresses the average performance level of the
+processor subject to hardware. Above the nominal performance level,
+the processor must provide at least nominal performance requested and go higher
+if current operating conditions allow.
+
+Energy Performance Preference (EPP) (RW)
+.........................................
+
+This attribute provides a hint to the hardware if software wants to bias
+toward performance (0x0) or energy efficiency (0xff).
+
+
+Key Governors Support
+=======================
+
+``amd-pstate`` can be used with all the (generic) scaling governors listed
+by the ``scaling_available_governors`` policy attribute in ``sysfs``. Then,
+it is responsible for the configuration of policy objects corresponding to
+CPUs and provides the ``CPUFreq`` core (and the scaling governors attached
+to the policy objects) with accurate information on the maximum and minimum
+operating frequencies supported by the hardware. Users can check the
+``scaling_cur_freq`` information comes from the ``CPUFreq`` core.
+
+``amd-pstate`` mainly supports ``schedutil`` and ``ondemand`` for dynamic
+frequency control. It is to fine tune the processor configuration on
+``amd-pstate`` to the ``schedutil`` with CPU CFS scheduler. ``amd-pstate``
+registers the adjust_perf callback to implement performance update behavior
+similar to CPPC. It is initialized by ``sugov_start`` and then populates the
+CPU's update_util_data pointer to assign ``sugov_update_single_perf`` as the
+utilization update callback function in the CPU scheduler. The CPU scheduler
+will call ``cpufreq_update_util`` and assigns the target performance according
+to the ``struct sugov_cpu`` that the utilization update belongs to.
+Then, ``amd-pstate`` updates the desired performance according to the CPU
+scheduler assigned.
+
+.. _processor_support:
+
+Processor Support
+=======================
+
+The ``amd-pstate`` initialization will fail if the ``_CPC`` entry in the ACPI
+SBIOS does not exist in the detected processor. It uses ``acpi_cpc_valid``
+to check the existence of ``_CPC``. All Zen based processors support the legacy
+ACPI hardware P-States function, so when ``amd-pstate`` fails initialization,
+the kernel will fall back to initialize the ``acpi-cpufreq`` driver.
+
+There are two types of hardware implementations for ``amd-pstate``: one is
+`Full MSR Support <perf_cap_>`_ and another is `Shared Memory Support
+<perf_cap_>`_. It can use the :c:macro:`X86_FEATURE_CPPC` feature flag to
+indicate the different types. (For details, refer to the Processor Programming
+Reference (PPR) for AMD Family 19h Model 51h, Revision A1 Processors [3]_.)
+``amd-pstate`` is to register different ``static_call`` instances for different
+hardware implementations.
+
+Currently, some of the Zen2 and Zen3 processors support ``amd-pstate``. In the
+future, it will be supported on more and more AMD processors.
+
+Full MSR Support
+-----------------
+
+Some new Zen3 processors such as Cezanne provide the MSR registers directly
+while the :c:macro:`X86_FEATURE_CPPC` CPU feature flag is set.
+``amd-pstate`` can handle the MSR register to implement the fast switch
+function in ``CPUFreq`` that can reduce the latency of frequency control in
+interrupt context. The functions with a ``pstate_xxx`` prefix represent the
+operations on MSR registers.
+
+Shared Memory Support
+----------------------
+
+If the :c:macro:`X86_FEATURE_CPPC` CPU feature flag is not set, the
+processor supports the shared memory solution. In this case, ``amd-pstate``
+uses the ``cppc_acpi`` helper methods to implement the callback functions
+that are defined on ``static_call``. The functions with the ``cppc_xxx`` prefix
+represent the operations of ACPI CPPC helpers for the shared memory solution.
+
+
+AMD P-States and ACPI hardware P-States always can be supported in one
+processor. But AMD P-States has the higher priority and if it is enabled
+with :c:macro:`MSR_AMD_CPPC_ENABLE` or ``cppc_set_enable``, it will respond
+to the request from AMD P-States.
+
+
+User Space Interface in ``sysfs`` - Per-policy control
+======================================================
+
+``amd-pstate`` exposes several global attributes (files) in ``sysfs`` to
+control its functionality at the system level. They are located in the
+``/sys/devices/system/cpu/cpufreq/policyX/`` directory and affect all CPUs. ::
+
+ root@hr-test1:/home/ray# ls /sys/devices/system/cpu/cpufreq/policy0/*amd*
+ /sys/devices/system/cpu/cpufreq/policy0/amd_pstate_highest_perf
+ /sys/devices/system/cpu/cpufreq/policy0/amd_pstate_lowest_nonlinear_freq
+ /sys/devices/system/cpu/cpufreq/policy0/amd_pstate_max_freq
+
+
+``amd_pstate_highest_perf / amd_pstate_max_freq``
+
+Maximum CPPC performance and CPU frequency that the driver is allowed to
+set, in percent of the maximum supported CPPC performance level (the highest
+performance supported in `AMD CPPC Performance Capability <perf_cap_>`_).
+In some ASICs, the highest CPPC performance is not the one in the ``_CPC``
+table, so we need to expose it to sysfs. If boost is not active, but
+still supported, this maximum frequency will be larger than the one in
+``cpuinfo``.
+This attribute is read-only.
+
+``amd_pstate_lowest_nonlinear_freq``
+
+The lowest non-linear CPPC CPU frequency that the driver is allowed to set,
+in percent of the maximum supported CPPC performance level. (Please see the
+lowest non-linear performance in `AMD CPPC Performance Capability
+<perf_cap_>`_.)
+This attribute is read-only.
+
+``energy_performance_available_preferences``
+
+A list of all the supported EPP preferences that could be used for
+``energy_performance_preference`` on this system.
+These profiles represent different hints that are provided
+to the low-level firmware about the user's desired energy vs efficiency
+tradeoff.  ``default`` represents the epp value is set by platform
+firmware. This attribute is read-only.
+
+``energy_performance_preference``
+
+The current energy performance preference can be read from this attribute.
+and user can change current preference according to energy or performance needs
+Please get all support profiles list from
+``energy_performance_available_preferences`` attribute, all the profiles are
+integer values defined between 0 to 255 when EPP feature is enabled by platform
+firmware, if EPP feature is disabled, driver will ignore the written value
+This attribute is read-write.
+
+Other performance and frequency values can be read back from
+``/sys/devices/system/cpu/cpuX/acpi_cppc/``, see :ref:`cppc_sysfs`.
+
+
+``amd-pstate`` vs ``acpi-cpufreq``
+======================================
+
+On the majority of AMD platforms supported by ``acpi-cpufreq``, the ACPI tables
+provided by the platform firmware are used for CPU performance scaling, but
+only provide 3 P-states on AMD processors.
+However, on modern AMD APU and CPU series, hardware provides the Collaborative
+Processor Performance Control according to the ACPI protocol and customizes this
+for AMD platforms. That is, fine-grained and continuous frequency ranges
+instead of the legacy hardware P-states. ``amd-pstate`` is the kernel
+module which supports the new AMD P-States mechanism on most of the future AMD
+platforms. The AMD P-States mechanism is the more performance and energy
+efficiency frequency management method on AMD processors.
+
+
+AMD Pstate Driver Operation Modes
+=================================
+
+``amd_pstate`` CPPC has 3 operation modes: autonomous (active) mode,
+non-autonomous (passive) mode and guided autonomous (guided) mode.
+Active/passive/guided mode can be chosen by different kernel parameters.
+
+- In autonomous mode, platform ignores the desired performance level request
+  and takes into account only the values set to the minimum, maximum and energy
+  performance preference registers.
+- In non-autonomous mode, platform gets desired performance level
+  from OS directly through Desired Performance Register.
+- In guided-autonomous mode, platform sets operating performance level
+  autonomously according to the current workload and within the limits set by
+  OS through min and max performance registers.
+
+Active Mode
+------------
+
+``amd_pstate=active``
+
+This is the low-level firmware control mode which is implemented by ``amd_pstate_epp``
+driver with ``amd_pstate=active`` passed to the kernel in the command line.
+In this mode, ``amd_pstate_epp`` driver provides a hint to the hardware if software
+wants to bias toward performance (0x0) or energy efficiency (0xff) to the CPPC firmware.
+then CPPC power algorithm will calculate the runtime workload and adjust the realtime
+cores frequency according to the power supply and thermal, core voltage and some other
+hardware conditions.
+
+Passive Mode
+------------
+
+``amd_pstate=passive``
+
+It will be enabled if the ``amd_pstate=passive`` is passed to the kernel in the command line.
+In this mode, ``amd_pstate`` driver software specifies a desired QoS target in the CPPC
+performance scale as a relative number. This can be expressed as percentage of nominal
+performance (infrastructure max). Below the nominal sustained performance level,
+desired performance expresses the average performance level of the processor subject
+to the Performance Reduction Tolerance register. Above the nominal performance level,
+processor must provide at least nominal performance requested and go higher if current
+operating conditions allow.
+
+Guided Mode
+-----------
+
+``amd_pstate=guided``
+
+If ``amd_pstate=guided`` is passed to kernel command line option then this mode
+is activated.  In this mode, driver requests minimum and maximum performance
+level and the platform autonomously selects a performance level in this range
+and appropriate to the current workload.
+
+User Space Interface in ``sysfs`` - General
+===========================================
+
+Global Attributes
+-----------------
+
+``amd-pstate`` exposes several global attributes (files) in ``sysfs`` to
+control its functionality at the system level.  They are located in the
+``/sys/devices/system/cpu/amd-pstate/`` directory and affect all CPUs.
+
+``status``
+	Operation mode of the driver: "active", "passive" or "disable".
+
+	"active"
+		The driver is functional and in the ``active mode``
+
+	"passive"
+		The driver is functional and in the ``passive mode``
+
+	"guided"
+		The driver is functional and in the ``guided mode``
+
+	"disable"
+		The driver is unregistered and not functional now.
+
+        This attribute can be written to in order to change the driver's
+        operation mode or to unregister it.  The string written to it must be
+        one of the possible values of it and, if successful, writing one of
+        these values to the sysfs file will cause the driver to switch over
+        to the operation mode represented by that string - or to be
+        unregistered in the "disable" case.
+
+``cpupower`` tool support for ``amd-pstate``
+===============================================
+
+``amd-pstate`` is supported by the ``cpupower`` tool, which can be used to dump
+frequency information. Development is in progress to support more and more
+operations for the new ``amd-pstate`` module with this tool. ::
+
+ root@hr-test1:/home/ray# cpupower frequency-info
+ analyzing CPU 0:
+   driver: amd-pstate
+   CPUs which run at the same hardware frequency: 0
+   CPUs which need to have their frequency coordinated by software: 0
+   maximum transition latency: 131 us
+   hardware limits: 400 MHz - 4.68 GHz
+   available cpufreq governors: ondemand conservative powersave userspace performance schedutil
+   current policy: frequency should be within 400 MHz and 4.68 GHz.
+                   The governor "schedutil" may decide which speed to use
+                   within this range.
+   current CPU frequency: Unable to call hardware
+   current CPU frequency: 4.02 GHz (asserted by call to kernel)
+   boost state support:
+     Supported: yes
+     Active: yes
+     AMD PSTATE Highest Performance: 166. Maximum Frequency: 4.68 GHz.
+     AMD PSTATE Nominal Performance: 117. Nominal Frequency: 3.30 GHz.
+     AMD PSTATE Lowest Non-linear Performance: 39. Lowest Non-linear Frequency: 1.10 GHz.
+     AMD PSTATE Lowest Performance: 15. Lowest Frequency: 400 MHz.
+
+
+Diagnostics and Tuning
+=======================
+
+Trace Events
+--------------
+
+There are two static trace events that can be used for ``amd-pstate``
+diagnostics. One of them is the ``cpu_frequency`` trace event generally used
+by ``CPUFreq``, and the other one is the ``amd_pstate_perf`` trace event
+specific to ``amd-pstate``.  The following sequence of shell commands can
+be used to enable them and see their output (if the kernel is
+configured to support event tracing). ::
+
+ root@hr-test1:/home/ray# cd /sys/kernel/tracing/
+ root@hr-test1:/sys/kernel/tracing# echo 1 > events/amd_cpu/enable
+ root@hr-test1:/sys/kernel/tracing# cat trace
+ # tracer: nop
+ #
+ # entries-in-buffer/entries-written: 47827/42233061   #P:2
+ #
+ #                                _-----=> irqs-off
+ #                               / _----=> need-resched
+ #                              | / _---=> hardirq/softirq
+ #                              || / _--=> preempt-depth
+ #                              ||| /     delay
+ #           TASK-PID     CPU#  ||||   TIMESTAMP  FUNCTION
+ #              | |         |   ||||      |         |
+          <idle>-0       [015] dN...  4995.979886: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=15 changed=false fast_switch=true
+          <idle>-0       [007] d.h..  4995.979893: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=7 changed=false fast_switch=true
+             cat-2161    [000] d....  4995.980841: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=0 changed=false fast_switch=true
+            sshd-2125    [004] d.s..  4995.980968: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=4 changed=false fast_switch=true
+          <idle>-0       [007] d.s..  4995.980968: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=7 changed=false fast_switch=true
+          <idle>-0       [003] d.s..  4995.980971: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=3 changed=false fast_switch=true
+          <idle>-0       [011] d.s..  4995.980996: amd_pstate_perf: amd_min_perf=85 amd_des_perf=85 amd_max_perf=166 cpu_id=11 changed=false fast_switch=true
+
+The ``cpu_frequency`` trace event will be triggered either by the ``schedutil`` scaling
+governor (for the policies it is attached to), or by the ``CPUFreq`` core (for the
+policies with other scaling governors).
+
+
+Tracer Tool
+-------------
+
+``amd_pstate_tracer.py`` can record and parse ``amd-pstate`` trace log, then
+generate performance plots. This utility can be used to debug and tune the
+performance of ``amd-pstate`` driver. The tracer tool needs to import intel
+pstate tracer.
+
+Tracer tool located in ``linux/tools/power/x86/amd_pstate_tracer``. It can be
+used in two ways. If trace file is available, then directly parse the file
+with command ::
+
+ ./amd_pstate_trace.py [-c cpus] -t <trace_file> -n <test_name>
+
+Or generate trace file with root privilege, then parse and plot with command ::
+
+ sudo ./amd_pstate_trace.py [-c cpus] -n <test_name> -i <interval> [-m kbytes]
+
+The test result can be found in ``results/test_name``. Following is the example
+about part of the output. ::
+
+ common_cpu  common_secs  common_usecs  min_perf  des_perf  max_perf  freq    mperf   apef    tsc       load   duration_ms  sample_num  elapsed_time  common_comm
+ CPU_005     712          116384        39        49        166       0.7565  9645075 2214891 38431470  25.1   11.646       469         2.496         kworker/5:0-40
+ CPU_006     712          116408        39        49        166       0.6769  8950227 1839034 37192089  24.06  11.272       470         2.496         kworker/6:0-1264
+
+Unit Tests for amd-pstate
+-------------------------
+
+``amd-pstate-ut`` is a test module for testing the ``amd-pstate`` driver.
+
+ * It can help all users to verify their processor support (SBIOS/Firmware or Hardware).
+
+ * Kernel can have a basic function test to avoid the kernel regression during the update.
+
+ * We can introduce more functional or performance tests to align the result together, it will benefit power and performance scale optimization.
+
+1. Test case descriptions
+
+    1). Basic tests
+
+        Test prerequisite and basic functions for the ``amd-pstate`` driver.
+
+        +---------+--------------------------------+------------------------------------------------------------------------------------+
+        | Index   | Functions                      | Description                                                                        |
+        +=========+================================+====================================================================================+
+        | 1       | amd_pstate_ut_acpi_cpc_valid   || Check whether the _CPC object is present in SBIOS.                                |
+        |         |                                ||                                                                                   |
+        |         |                                || The detail refer to `Processor Support <processor_support_>`_.                    |
+        +---------+--------------------------------+------------------------------------------------------------------------------------+
+        | 2       | amd_pstate_ut_check_enabled    || Check whether AMD P-State is enabled.                                             |
+        |         |                                ||                                                                                   |
+        |         |                                || AMD P-States and ACPI hardware P-States always can be supported in one processor. |
+        |         |                                | But AMD P-States has the higher priority and if it is enabled with                 |
+        |         |                                | :c:macro:`MSR_AMD_CPPC_ENABLE` or ``cppc_set_enable``, it will respond to the      |
+        |         |                                | request from AMD P-States.                                                         |
+        +---------+--------------------------------+------------------------------------------------------------------------------------+
+        | 3       | amd_pstate_ut_check_perf       || Check if the each performance values are reasonable.                              |
+        |         |                                || highest_perf >= nominal_perf > lowest_nonlinear_perf > lowest_perf > 0.           |
+        +---------+--------------------------------+------------------------------------------------------------------------------------+
+        | 4       | amd_pstate_ut_check_freq       || Check if the each frequency values and max freq when set support boost mode       |
+        |         |                                | are reasonable.                                                                    |
+        |         |                                || max_freq >= nominal_freq > lowest_nonlinear_freq > min_freq > 0                   |
+        |         |                                || If boost is not active but supported, this maximum frequency will be larger than  |
+        |         |                                | the one in ``cpuinfo``.                                                            |
+        +---------+--------------------------------+------------------------------------------------------------------------------------+
+
+    2). Tbench test
+
+        Test and monitor the cpu changes when running tbench benchmark under the specified governor.
+        These changes include desire performance, frequency, load, performance, energy etc.
+        The specified governor is ondemand or schedutil.
+        Tbench can also be tested on the ``acpi-cpufreq`` kernel driver for comparison.
+
+    3). Gitsource test
+
+        Test and monitor the cpu changes when running gitsource benchmark under the specified governor.
+        These changes include desire performance, frequency, load, time, energy etc.
+        The specified governor is ondemand or schedutil.
+        Gitsource can also be tested on the ``acpi-cpufreq`` kernel driver for comparison.
+
+#. How to execute the tests
+
+   We use test module in the kselftest frameworks to implement it.
+   We create ``amd-pstate-ut`` module and tie it into kselftest.(for
+   details refer to Linux Kernel Selftests [4]_).
+
+    1). Build
+
+        + open the :c:macro:`CONFIG_X86_AMD_PSTATE` configuration option.
+        + set the :c:macro:`CONFIG_X86_AMD_PSTATE_UT` configuration option to M.
+        + make project
+        + make selftest ::
+
+            $ cd linux
+            $ make -C tools/testing/selftests
+
+        + make perf ::
+
+            $ cd tools/perf/
+            $ make
+
+
+    2). Installation & Steps ::
+
+        $ make -C tools/testing/selftests install INSTALL_PATH=~/kselftest
+        $ cp tools/perf/perf /usr/bin/perf
+        $ sudo ./kselftest/run_kselftest.sh -c amd-pstate
+
+    3). Specified test case ::
+
+        $ cd ~/kselftest/amd-pstate
+        $ sudo ./run.sh -t basic
+        $ sudo ./run.sh -t tbench
+        $ sudo ./run.sh -t tbench -m acpi-cpufreq
+        $ sudo ./run.sh -t gitsource
+        $ sudo ./run.sh -t gitsource -m acpi-cpufreq
+        $ ./run.sh --help
+        ./run.sh: illegal option -- -
+        Usage: ./run.sh [OPTION...]
+                [-h <help>]
+                [-o <output-file-for-dump>]
+                [-c <all: All testing,
+                     basic: Basic testing,
+                     tbench: Tbench testing,
+                     gitsource: Gitsource testing.>]
+                [-t <tbench time limit>]
+                [-p <tbench process number>]
+                [-l <loop times for tbench>]
+                [-i <amd tracer interval>]
+                [-m <comparative test: acpi-cpufreq>]
+
+
+    4). Results
+
+        + basic
+
+         When you finish test, you will get the following log info ::
+
+          $ dmesg | grep "amd_pstate_ut" | tee log.txt
+          [12977.570663] amd_pstate_ut: 1    amd_pstate_ut_acpi_cpc_valid  success!
+          [12977.570673] amd_pstate_ut: 2    amd_pstate_ut_check_enabled   success!
+          [12977.571207] amd_pstate_ut: 3    amd_pstate_ut_check_perf      success!
+          [12977.571212] amd_pstate_ut: 4    amd_pstate_ut_check_freq      success!
+
+        + tbench
+
+         When you finish test, you will get selftest.tbench.csv and png images.
+         The selftest.tbench.csv file contains the raw data and the drop of the comparative test.
+         The png images shows the performance, energy and performan per watt of each test.
+         Open selftest.tbench.csv :
+
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + Governor                                        | Round        | Des-perf | Freq    | Load     | Performance | Energy  | Performance Per Watt |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + Unit                                            |              |          | GHz     |          | MB/s        | J       | MB/J                 |
+         +=================================================+==============+==========+=========+==========+=============+=========+======================+
+         + amd-pstate-ondemand                             | 1            |          |         |          | 2504.05     | 1563.67 | 158.5378             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand                             | 2            |          |         |          | 2243.64     | 1430.32 | 155.2941             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand                             | 3            |          |         |          | 2183.88     | 1401.32 | 154.2860             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand                             | Average      |          |         |          | 2310.52     | 1465.1  | 156.1268             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | 1            | 165.329  | 1.62257 | 99.798   | 2136.54     | 1395.26 | 151.5971             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | 2            | 166      | 1.49761 | 99.9993  | 2100.56     | 1380.5  | 150.6377             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | 3            | 166      | 1.47806 | 99.9993  | 2084.12     | 1375.76 | 149.9737             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | Average      | 165.776  | 1.53275 | 99.9322  | 2107.07     | 1383.84 | 150.7399             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | 1            |          |         |          | 2529.9      | 1564.4  | 160.0997             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | 2            |          |         |          | 2249.76     | 1432.97 | 155.4297             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | 3            |          |         |          | 2181.46     | 1406.88 | 153.5060             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | Average      |          |         |          | 2320.37     | 1468.08 | 156.4741             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | 1            |          |         |          | 2137.64     | 1385.24 | 152.7723             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | 2            |          |         |          | 2107.05     | 1372.23 | 152.0138             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | 3            |          |         |          | 2085.86     | 1365.35 | 151.2433             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | Average      |          |         |          | 2110.18     | 1374.27 | 152.0136             |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil | Comprison(%) |          |         |          | -9.0584     | -6.3899 | -2.8506              |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand VS amd-pstate-schedutil     | Comprison(%) |          |         |          | 8.8053      | -5.5463 | -3.4503              |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand VS amd-pstate-ondemand    | Comprison(%) |          |         |          | -0.4245     | -0.2029 | -0.2219              |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil VS amd-pstate-schedutil  | Comprison(%) |          |         |          | -0.1473     | 0.6963  | -0.8378              |
+         +-------------------------------------------------+--------------+----------+---------+----------+-------------+---------+----------------------+
+
+        + gitsource
+
+         When you finish test, you will get selftest.gitsource.csv and png images.
+         The selftest.gitsource.csv file contains the raw data and the drop of the comparative test.
+         The png images shows the performance, energy and performan per watt of each test.
+         Open selftest.gitsource.csv :
+
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + Governor                                        | Round        | Des-perf | Freq     | Load     | Time        | Energy  | Performance Per Watt |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + Unit                                            |              |          | GHz      |          | s           | J       | 1/J                  |
+         +=================================================+==============+==========+==========+==========+=============+=========+======================+
+         + amd-pstate-ondemand                             | 1            | 50.119   | 2.10509  | 23.3076  | 475.69      | 865.78  | 0.001155027          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand                             | 2            | 94.8006  | 1.98771  | 56.6533  | 467.1       | 839.67  | 0.001190944          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand                             | 3            | 76.6091  | 2.53251  | 43.7791  | 467.69      | 855.85  | 0.001168429          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand                             | Average      | 73.8429  | 2.20844  | 41.2467  | 470.16      | 853.767 | 0.001171279          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | 1            | 165.919  | 1.62319  | 98.3868  | 464.17      | 866.8   | 0.001153668          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | 2            | 165.97   | 1.31309  | 99.5712  | 480.15      | 880.4   | 0.001135847          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | 3            | 165.973  | 1.28448  | 99.9252  | 481.79      | 867.02  | 0.001153375          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-schedutil                            | Average      | 165.954  | 1.40692  | 99.2944  | 475.37      | 871.407 | 0.001147569          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | 1            |          |          |          | 2379.62     | 742.96  | 0.001345967          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | 2            |          |          |          | 441.74      | 817.49  | 0.001223256          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | 3            |          |          |          | 455.48      | 820.01  | 0.001219497          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand                           | Average      |          |          |          | 425.613     | 793.487 | 0.001260260          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | 1            |          |          |          | 459.69      | 838.54  | 0.001192548          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | 2            |          |          |          | 466.55      | 830.89  | 0.001203528          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | 3            |          |          |          | 470.38      | 837.32  | 0.001194286          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil                          | Average      |          |          |          | 465.54      | 835.583 | 0.001196769          |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand VS acpi-cpufreq-schedutil | Comprison(%) |          |          |          | 9.3810      | 5.3051  | -5.0379              |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + amd-pstate-ondemand VS amd-pstate-schedutil     | Comprison(%) | 124.7392 | -36.2934 | 140.7329 | 1.1081      | 2.0661  | -2.0242              |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-ondemand VS amd-pstate-ondemand    | Comprison(%) |          |          |          | 10.4665     | 7.5968  | -7.0605              |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+         + acpi-cpufreq-schedutil VS amd-pstate-schedutil  | Comprison(%) |          |          |          | 2.1115      | 4.2873  | -4.1110              |
+         +-------------------------------------------------+--------------+----------+----------+----------+-------------+---------+----------------------+
+
+Reference
+===========
+
+.. [1] AMD64 Architecture Programmer's Manual Volume 2: System Programming,
+       https://www.amd.com/system/files/TechDocs/24593.pdf
+
+.. [2] Advanced Configuration and Power Interface Specification,
+       https://uefi.org/sites/default/files/resources/ACPI_Spec_6_4_Jan22.pdf
+
+.. [3] Processor Programming Reference (PPR) for AMD Family 19h Model 51h, Revision A1 Processors
+       https://www.amd.com/system/files/TechDocs/56569-A1-PUB.zip
+
+.. [4] Linux Kernel Selftests,
+       https://www.kernel.org/doc/html/latest/dev-tools/kselftest.html
diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst
index aec2cd2aaea7..19754beb5a4e 100644
--- a/Documentation/admin-guide/pm/cpuidle.rst
+++ b/Documentation/admin-guide/pm/cpuidle.rst
@@ -612,8 +612,8 @@ the ``menu`` governor to be used on the systems that use the ``ladder`` governor
 by default this way, for example.
 
 The other kernel command line parameters controlling CPU idle time management
-described below are only relevant for the *x86* architecture and some of
-them affect Intel processors only.
+described below are only relevant for the *x86* architecture and references
+to ``intel_idle`` affect Intel processors only.
 
 The *x86* architecture support code recognizes three kernel command line
 options related to CPU idle time management: ``idle=poll``, ``idle=halt``,
@@ -635,10 +635,13 @@ idle, so it very well may hurt single-thread computations performance as well as
 energy-efficiency.  Thus using it for performance reasons may not be a good idea
 at all.]
 
-The ``idle=nomwait`` option disables the ``intel_idle`` driver and causes
-``acpi_idle`` to be used (as long as all of the information needed by it is
-there in the system's ACPI tables), but it is not allowed to use the
-``MWAIT`` instruction of the CPUs to ask the hardware to enter idle states.
+The ``idle=nomwait`` option prevents the use of ``MWAIT`` instruction of
+the CPU to enter idle states. When this option is used, the ``acpi_idle``
+driver will use the ``HLT`` instruction instead of ``MWAIT``. On systems
+running Intel processors, this option disables the ``intel_idle`` driver
+and forces the use of the ``acpi_idle`` driver instead. Note that in either
+case, ``acpi_idle`` driver will function only if all the information needed
+by it is in the system's ACPI tables.
 
 In addition to the architecture-level kernel command line options affecting CPU
 idle time management, there are parameters affecting individual ``CPUIdle``
diff --git a/Documentation/admin-guide/pm/intel-speed-select.rst b/Documentation/admin-guide/pm/intel-speed-select.rst
index 0a1fbdb54bfe..a2bfb971654f 100644
--- a/Documentation/admin-guide/pm/intel-speed-select.rst
+++ b/Documentation/admin-guide/pm/intel-speed-select.rst
@@ -262,6 +262,28 @@ Which shows that the base frequency now increased from 2600 MHz at performance
 level 0 to 2800 MHz at performance level 4. As a result, any workload, which can
 use fewer CPUs, can see a boost of 200 MHz compared to performance level 0.
 
+Changing performance level via BMC Interface
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+It is possible to change SST-PP level using out of band (OOB) agent (Via some
+remote management console, through BMC "Baseboard Management Controller"
+interface). This mode is supported from the Sapphire Rapids processor
+generation. The kernel and tool change to support this mode is added to Linux
+kernel version 5.18. To enable this feature, kernel config
+"CONFIG_INTEL_HFI_THERMAL" is required. The minimum version of the tool
+is "v1.12" to support this feature, which is part of Linux kernel version 5.18.
+
+To support such configuration, this tool can be used as a daemon. Add
+a command line option --oob::
+
+ # intel-speed-select --oob
+ Intel(R) Speed Select Technology
+ Executing on CPU model:143[0x8f]
+ OOB mode is enabled and will run as daemon
+
+In this mode the tool will online/offline CPUs based on the new performance
+level.
+
 Check presence of other Intel(R) SST features
 ---------------------------------------------
 
diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst
index d5043cd8d2f5..bf13ad25a32f 100644
--- a/Documentation/admin-guide/pm/intel_pstate.rst
+++ b/Documentation/admin-guide/pm/intel_pstate.rst
@@ -712,7 +712,7 @@ it works in the `active mode <Active Mode_>`_.
 The following sequence of shell commands can be used to enable them and see
 their output (if the kernel is generally configured to support event tracing)::
 
- # cd /sys/kernel/debug/tracing/
+ # cd /sys/kernel/tracing/
  # echo 1 > events/power/pstate_sample/enable
  # echo 1 > events/power/cpu_frequency/enable
  # cat trace
@@ -732,7 +732,7 @@ The ``ftrace`` interface can be used for low-level diagnostics of
 P-state is called, the ``ftrace`` filter can be set to
 :c:func:`intel_pstate_set_pstate`::
 
- # cd /sys/kernel/debug/tracing/
+ # cd /sys/kernel/tracing/
  # cat available_filter_functions | grep -i pstate
  intel_pstate_set_pstate
  intel_pstate_cpu_init
diff --git a/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst b/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst
new file mode 100644
index 000000000000..09169d935835
--- /dev/null
+++ b/Documentation/admin-guide/pm/intel_uncore_frequency_scaling.rst
@@ -0,0 +1,60 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+==============================
+Intel Uncore Frequency Scaling
+==============================
+
+:Copyright: |copy| 2022 Intel Corporation
+
+:Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
+
+Introduction
+------------
+
+The uncore can consume significant amount of power in Intel's Xeon servers based
+on the workload characteristics. To optimize the total power and improve overall
+performance, SoCs have internal algorithms for scaling uncore frequency. These
+algorithms monitor workload usage of uncore and set a desirable frequency.
+
+It is possible that users have different expectations of uncore performance and
+want to have control over it. The objective is similar to allowing users to set
+the scaling min/max frequencies via cpufreq sysfs to improve CPU performance.
+Users may have some latency sensitive workloads where they do not want any
+change to uncore frequency. Also, users may have workloads which require
+different core and uncore performance at distinct phases and they may want to
+use both cpufreq and the uncore scaling interface to distribute power and
+improve overall performance.
+
+Sysfs Interface
+---------------
+
+To control uncore frequency, a sysfs interface is provided in the directory:
+`/sys/devices/system/cpu/intel_uncore_frequency/`.
+
+There is one directory for each package and die combination as the scope of
+uncore scaling control is per die in multiple die/package SoCs or per
+package for single die per package SoCs. The name represents the
+scope of control. For example: 'package_00_die_00' is for package id 0 and
+die 0.
+
+Each package_*_die_* contains the following attributes:
+
+``initial_max_freq_khz``
+	Out of reset, this attribute represent the maximum possible frequency.
+	This is a read-only attribute. If users adjust max_freq_khz,
+	they can always go back to maximum using the value from this attribute.
+
+``initial_min_freq_khz``
+	Out of reset, this attribute represent the minimum possible frequency.
+	This is a read-only attribute. If users adjust min_freq_khz,
+	they can always go back to minimum using the value from this attribute.
+
+``max_freq_khz``
+	This attribute is used to set the maximum uncore frequency.
+
+``min_freq_khz``
+	This attribute is used to set the minimum uncore frequency.
+
+``current_freq_khz``
+	This attribute is used to get the current uncore frequency.
diff --git a/Documentation/admin-guide/pm/working-state.rst b/Documentation/admin-guide/pm/working-state.rst
index f40994c422dc..ee45887811ff 100644
--- a/Documentation/admin-guide/pm/working-state.rst
+++ b/Documentation/admin-guide/pm/working-state.rst
@@ -11,6 +11,8 @@ Working-State Power Management
    intel_idle
    cpufreq
    intel_pstate
+   amd-pstate
    cpufreq_drivers
    intel_epb
    intel-speed-select
+   intel_uncore_frequency_scaling
diff --git a/Documentation/admin-guide/quickly-build-trimmed-linux.rst b/Documentation/admin-guide/quickly-build-trimmed-linux.rst
new file mode 100644
index 000000000000..ff4f4cc8522b
--- /dev/null
+++ b/Documentation/admin-guide/quickly-build-trimmed-linux.rst
@@ -0,0 +1,1092 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR CC-BY-4.0)
+.. [see the bottom of this file for redistribution information]
+
+===========================================
+How to quickly build a trimmed Linux kernel
+===========================================
+
+This guide explains how to swiftly build Linux kernels that are ideal for
+testing purposes, but perfectly fine for day-to-day use, too.
+
+The essence of the process (aka 'TL;DR')
+========================================
+
+*[If you are new to compiling Linux, ignore this TLDR and head over to the next
+section below: it contains a step-by-step guide, which is more detailed, but
+still brief and easy to follow; that guide and its accompanying reference
+section also mention alternatives, pitfalls, and additional aspects, all of
+which might be relevant for you.]*
+
+If your system uses techniques like Secure Boot, prepare it to permit starting
+self-compiled Linux kernels; install compilers and everything else needed for
+building Linux; make sure to have 12 Gigabyte free space in your home directory.
+Now run the following commands to download fresh Linux mainline sources, which
+you then use to configure, build and install your own kernel::
+
+    git clone --depth 1 -b master \
+      https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git ~/linux/
+    cd ~/linux/
+    # Hint: if you want to apply patches, do it at this point. See below for details.
+    # Hint: it's recommended to tag your build at this point. See below for details.
+    yes "" | make localmodconfig
+    # Hint: at this point you might want to adjust the build configuration; you'll
+    #   have to, if you are running Debian. See below for details.
+    make -j $(nproc --all)
+    # Note: on many commodity distributions the next command suffices, but on Arch
+    #   Linux, its derivatives, and some others it does not. See below for details.
+    command -v installkernel && sudo make modules_install install
+    reboot
+
+If you later want to build a newer mainline snapshot, use these commands::
+
+    cd ~/linux/
+    git fetch --depth 1 origin
+    # Note: the next command will discard any changes you did to the code:
+    git checkout --force --detach origin/master
+    # Reminder: if you want to (re)apply patches, do it at this point.
+    # Reminder: you might want to add or modify a build tag at this point.
+    make olddefconfig
+    make -j $(nproc --all)
+    # Reminder: the next command on some distributions does not suffice.
+    command -v installkernel && sudo make modules_install install
+    reboot
+
+Step-by-step guide
+==================
+
+Compiling your own Linux kernel is easy in principle. There are various ways to
+do it. Which of them actually work and is the best depends on the circumstances.
+
+This guide describes a way perfectly suited for those who want to quickly
+install Linux from sources without being bothered by complicated details; the
+goal is to cover everything typically needed on mainstream Linux distributions
+running on commodity PC or server hardware.
+
+The described approach is great for testing purposes, for example to try a
+proposed fix or to check if a problem was already fixed in the latest codebase.
+Nonetheless, kernels built this way are also totally fine for day-to-day use
+while at the same time being easy to keep up to date.
+
+The following steps describe the important aspects of the process; a
+comprehensive reference section later explains each of them in more detail. It
+sometimes also describes alternative approaches, pitfalls, as well as errors
+that might occur at a particular point -- and how to then get things rolling
+again.
+
+..
+   Note: if you see this note, you are reading the text's source file. You
+   might want to switch to a rendered version, as it makes it a lot easier to
+   quickly look something up in the reference section and afterwards jump back
+   to where you left off. Find a the latest rendered version here:
+   https://docs.kernel.org/admin-guide/quickly-build-trimmed-linux.html
+
+.. _backup_sbs:
+
+ * Create a fresh backup and put system repair and restore tools at hand, just
+   to be prepared for the unlikely case of something going sideways.
+
+   [:ref:`details<backup>`]
+
+.. _secureboot_sbs:
+
+ * On platforms with 'Secure Boot' or similar techniques, prepare everything to
+   ensure the system will permit your self-compiled kernel to boot later. The
+   quickest and easiest way to achieve this on commodity x86 systems is to
+   disable such techniques in the BIOS setup utility; alternatively, remove
+   their restrictions through a process initiated by
+   ``mokutil --disable-validation``.
+
+   [:ref:`details<secureboot>`]
+
+.. _buildrequires_sbs:
+
+ * Install all software required to build a Linux kernel. Often you will need:
+   'bc', 'binutils' ('ld' et al.), 'bison', 'flex', 'gcc', 'git', 'openssl',
+   'pahole', 'perl', and the development headers for 'libelf' and 'openssl'. The
+   reference section shows how to quickly install those on various popular Linux
+   distributions.
+
+   [:ref:`details<buildrequires>`]
+
+.. _diskspace_sbs:
+
+ * Ensure to have enough free space for building and installing Linux. For the
+   latter 150 Megabyte in /lib/ and 100 in /boot/ are a safe bet. For storing
+   sources and build artifacts 12 Gigabyte in your home directory should
+   typically suffice. If you have less available, be sure to check the reference
+   section for the step that explains adjusting your kernels build
+   configuration: it mentions a trick that reduce the amount of required space
+   in /home/ to around 4 Gigabyte.
+
+   [:ref:`details<diskspace>`]
+
+.. _sources_sbs:
+
+ * Retrieve the sources of the Linux version you intend to build; then change
+   into the directory holding them, as all further commands in this guide are
+   meant to be executed from there.
+
+   *[Note: the following paragraphs describe how to retrieve the sources by
+   partially cloning the Linux stable git repository. This is called a shallow
+   clone. The reference section explains two alternatives:* :ref:`packaged
+   archives<sources_archive>` *and* :ref:`a full git clone<sources_full>` *;
+   prefer the latter, if downloading a lot of data does not bother you, as that
+   will avoid some* :ref:`peculiar characteristics of shallow clones the
+   reference section explains<sources_shallow>` *.]*
+
+   First, execute the following command to retrieve a fresh mainline codebase::
+
+     git clone --no-checkout --depth 1 -b master \
+       https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git ~/linux/
+     cd ~/linux/
+
+   If you want to access recent mainline releases and pre-releases, deepen you
+   clone's history to the oldest mainline version you are interested in::
+
+     git fetch --shallow-exclude=v6.0 origin
+
+   In case you want to access a stable/longterm release (say v6.1.5), simply add
+   the branch holding that series; afterwards fetch the history at least up to
+   the mainline version that started the series (v6.1)::
+
+     git remote set-branches --add origin linux-6.1.y
+     git fetch --shallow-exclude=v6.0 origin
+
+   Now checkout the code you are interested in. If you just performed the
+   initial clone, you will be able to check out a fresh mainline codebase, which
+   is ideal for checking whether developers already fixed an issue::
+
+      git checkout --detach origin/master
+
+   If you deepened your clone, you instead of ``origin/master`` can specify the
+   version you deepened to (``v6.0`` above); later releases like ``v6.1`` and
+   pre-release like ``v6.2-rc1`` will work, too. Stable or longterm versions
+   like ``v6.1.5`` work just the same, if you added the appropriate
+   stable/longterm branch as described.
+
+   [:ref:`details<sources>`]
+
+.. _patching_sbs:
+
+ * In case you want to apply a kernel patch, do so now. Often a command like
+   this will do the trick::
+
+     patch -p1 < ../proposed-fix.patch
+
+   If the ``-p1`` is actually needed, depends on how the patch was created; in
+   case it does not apply thus try without it.
+
+   If you cloned the sources with git and anything goes sideways, run ``git
+   reset --hard`` to undo any changes to the sources.
+
+   [:ref:`details<patching>`]
+
+.. _tagging_sbs:
+
+ * If you patched your kernel or have one of the same version installed already,
+   better add a unique tag to the one you are about to build::
+
+     echo "-proposed_fix" > localversion
+
+   Running ``uname -r`` under your kernel later will then print something like
+   '6.1-rc4-proposed_fix'.
+
+   [:ref:`details<tagging>`]
+
+ .. _configuration_sbs:
+
+ * Create the build configuration for your kernel based on an existing
+   configuration.
+
+   If you already prepared such a '.config' file yourself, copy it to
+   ~/linux/ and run ``make olddefconfig``.
+
+   Use the same command, if your distribution or somebody else already tailored
+   your running kernel to your or your hardware's needs: the make target
+   'olddefconfig' will then try to use that kernel's .config as base.
+
+   Using this make target is fine for everybody else, too -- but you often can
+   save a lot of time by using this command instead::
+
+     yes "" | make localmodconfig
+
+   This will try to pick your distribution's kernel as base, but then disable
+   modules for any features apparently superfluous for your setup. This will
+   reduce the compile time enormously, especially if you are running an
+   universal kernel from a commodity Linux distribution.
+
+   There is a catch: the make target 'localmodconfig' will disable kernel
+   features you have not directly or indirectly through some program utilized
+   since you booted the system. You can reduce or nearly eliminate that risk by
+   using tricks outlined in the reference section; for quick testing purposes
+   that risk is often negligible, but it is an aspect you want to keep in mind
+   in case your kernel behaves oddly.
+
+   [:ref:`details<configuration>`]
+
+.. _configmods_sbs:
+
+ * Check if you might want to or have to adjust some kernel configuration
+   options:
+
+  * Evaluate how you want to handle debug symbols. Enable them, if you later
+    might need to decode a stack trace found for example in a 'panic', 'Oops',
+    'warning', or 'BUG'; on the other hand disable them, if you are short on
+    storage space or prefer a smaller kernel binary. See the reference section
+    for details on how to do either. If neither applies, it will likely be fine
+    to simply not bother with this. [:ref:`details<configmods_debugsymbols>`]
+
+  * Are you running Debian? Then to avoid known problems by performing
+    additional adjustments explained in the reference section.
+    [:ref:`details<configmods_distros>`].
+
+  * If you want to influence the other aspects of the configuration, do so now
+    by using make targets like 'menuconfig' or 'xconfig'.
+    [:ref:`details<configmods_individual>`].
+
+.. _build_sbs:
+
+ * Build the image and the modules of your kernel::
+
+     make -j $(nproc --all)
+
+   If you want your kernel packaged up as deb, rpm, or tar file, see the
+   reference section for alternatives.
+
+   [:ref:`details<build>`]
+
+.. _install_sbs:
+
+ * Now install your kernel::
+
+     command -v installkernel && sudo make modules_install install
+
+   Often all left for you to do afterwards is a ``reboot``, as many commodity
+   Linux distributions will then create an initramfs (also known as initrd) and
+   an entry for your kernel in your bootloader's configuration; but on some
+   distributions you have to take care of these two steps manually for reasons
+   the reference section explains.
+
+   On a few distributions like Arch Linux and its derivatives the above command
+   does nothing at all; in that case you have to manually install your kernel,
+   as outlined in the reference section.
+
+   [:ref:`details<install>`]
+
+.. _another_sbs:
+
+ * To later build another kernel you need similar steps, but sometimes slightly
+   different commands.
+
+   First, switch back into the sources tree::
+
+      cd ~/linux/
+
+   In case you want to build a version from a stable/longterm series you have
+   not used yet (say 6.2.y), tell git to track it::
+
+      git remote set-branches --add origin linux-6.2.y
+
+   Now fetch the latest upstream changes; you again need to specify the earliest
+   version you care about, as git otherwise might retrieve the entire commit
+   history::
+
+     git fetch --shallow-exclude=v6.1 origin
+
+   If you modified the sources (for example by applying a patch), you now need
+   to discard those modifications; that's because git otherwise will not be able
+   to switch to the sources of another version due to potential conflicting
+   changes::
+
+     git reset --hard
+
+   Now checkout the version you are interested in, as explained above::
+
+     git checkout --detach origin/master
+
+   At this point you might want to patch the sources again or set/modify a build
+   tag, as explained earlier; afterwards adjust the build configuration to the
+   new codebase and build your next kernel::
+
+     # reminder: if you want to apply patches, do it at this point
+     # reminder: you might want to update your build tag at this point
+     make olddefconfig
+     make -j $(nproc --all)
+
+   Install the kernel as outlined above::
+
+     command -v installkernel && sudo make modules_install install
+
+   [:ref:`details<another>`]
+
+.. _uninstall_sbs:
+
+ * Your kernel is easy to remove later, as its parts are only stored in two
+   places and clearly identifiable by the kernel's release name. Just ensure to
+   not delete the kernel you are running, as that might render your system
+   unbootable.
+
+   Start by deleting the directory holding your kernel's modules, which is named
+   after its release name -- '6.0.1-foobar' in the following example::
+
+     sudo rm -rf /lib/modules/6.0.1-foobar
+
+   Now try the following command, which on some distributions will delete all
+   other kernel files installed while also removing the kernel's entry from the
+   bootloader configuration::
+
+     command -v kernel-install && sudo kernel-install -v remove 6.0.1-foobar
+
+   If that command does not output anything or fails, see the reference section;
+   do the same if any files named '*6.0.1-foobar*' remain in /boot/.
+
+   [:ref:`details<uninstall>`]
+
+.. _submit_improvements:
+
+Did you run into trouble following any of the above steps that is not cleared up
+by the reference section below? Or do you have ideas how to improve the text?
+Then please take a moment of your time and let the maintainer of this document
+know by email (Thorsten Leemhuis <linux@leemhuis.info>), ideally while CCing the
+Linux docs mailing list (linux-doc@vger.kernel.org). Such feedback is vital to
+improve this document further, which is in everybody's interest, as it will
+enable more people to master the task described here.
+
+Reference section for the step-by-step guide
+============================================
+
+This section holds additional information for each of the steps in the above
+guide.
+
+.. _backup:
+
+Prepare for emergencies
+-----------------------
+
+   *Create a fresh backup and put system repair and restore tools at hand*
+   [:ref:`... <backup_sbs>`]
+
+Remember, you are dealing with computers, which sometimes do unexpected things
+-- especially if you fiddle with crucial parts like the kernel of an operating
+system. That's what you are about to do in this process. Hence, better prepare
+for something going sideways, even if that should not happen.
+
+[:ref:`back to step-by-step guide <backup_sbs>`]
+
+.. _secureboot:
+
+Dealing with techniques like Secure Boot
+----------------------------------------
+
+   *On platforms with 'Secure Boot' or similar techniques, prepare everything to
+   ensure the system will permit your self-compiled kernel to boot later.*
+   [:ref:`... <secureboot_sbs>`]
+
+Many modern systems allow only certain operating systems to start; they thus by
+default will reject booting self-compiled kernels.
+
+You ideally deal with this by making your platform trust your self-built kernels
+with the help of a certificate and signing. How to do that is not described
+here, as it requires various steps that would take the text too far away from
+its purpose; 'Documentation/admin-guide/module-signing.rst' and various web
+sides already explain this in more detail.
+
+Temporarily disabling solutions like Secure Boot is another way to make your own
+Linux boot. On commodity x86 systems it is possible to do this in the BIOS Setup
+utility; the steps to do so are not described here, as they greatly vary between
+machines.
+
+On mainstream x86 Linux distributions there is a third and universal option:
+disable all Secure Boot restrictions for your Linux environment. You can
+initiate this process by running ``mokutil --disable-validation``; this will
+tell you to create a one-time password, which is safe to write down. Now
+restart; right after your BIOS performed all self-tests the bootloader Shim will
+show a blue box with a message 'Press any key to perform MOK management'. Hit
+some key before the countdown exposes. This will open a menu and choose 'Change
+Secure Boot state' there. Shim's 'MokManager' will now ask you to enter three
+randomly chosen characters from the one-time password specified earlier. Once
+you provided them, confirm that you really want to disable the validation.
+Afterwards, permit MokManager to reboot the machine.
+
+[:ref:`back to step-by-step guide <secureboot_sbs>`]
+
+.. _buildrequires:
+
+Install build requirements
+--------------------------
+
+   *Install all software required to build a Linux kernel.*
+   [:ref:`...<buildrequires_sbs>`]
+
+The kernel is pretty stand-alone, but besides tools like the compiler you will
+sometimes need a few libraries to build one. How to install everything needed
+depends on your Linux distribution and the configuration of the kernel you are
+about to build.
+
+Here are a few examples what you typically need on some mainstream
+distributions:
+
+ * Debian, Ubuntu, and derivatives::
+
+     sudo apt install bc binutils bison dwarves flex gcc git make openssl \
+       pahole perl-base libssl-dev libelf-dev
+
+ * Fedora and derivatives::
+
+     sudo dnf install binutils /usr/include/{libelf.h,openssl/pkcs7.h} \
+       /usr/bin/{bc,bison,flex,gcc,git,openssl,make,perl,pahole}
+
+ * openSUSE and derivatives::
+
+     sudo zypper install bc binutils bison dwarves flex gcc git make perl-base \
+       openssl openssl-devel libelf-dev
+
+In case you wonder why these lists include openssl and its development headers:
+they are needed for the Secure Boot support, which many distributions enable in
+their kernel configuration for x86 machines.
+
+Sometimes you will need tools for compression formats like bzip2, gzip, lz4,
+lzma, lzo, xz, or zstd as well.
+
+You might need additional libraries and their development headers in case you
+perform tasks not covered in this guide. For example, zlib will be needed when
+building kernel tools from the tools/ directory; adjusting the build
+configuration with make targets like 'menuconfig' or 'xconfig' will require
+development headers for ncurses or Qt5.
+
+[:ref:`back to step-by-step guide <buildrequires_sbs>`]
+
+.. _diskspace:
+
+Space requirements
+------------------
+
+   *Ensure to have enough free space for building and installing Linux.*
+   [:ref:`... <diskspace_sbs>`]
+
+The numbers mentioned are rough estimates with a big extra charge to be on the
+safe side, so often you will need less.
+
+If you have space constraints, remember to read the reference section when you
+reach the :ref:`section about configuration adjustments' <configmods>`, as
+ensuring debug symbols are disabled will reduce the consumed disk space by quite
+a few gigabytes.
+
+[:ref:`back to step-by-step guide <diskspace_sbs>`]
+
+
+.. _sources:
+
+Download the sources
+--------------------
+
+  *Retrieve the sources of the Linux version you intend to build.*
+  [:ref:`...<sources_sbs>`]
+
+The step-by-step guide outlines how to retrieve Linux' sources using a shallow
+git clone. There is :ref:`more to tell about this method<sources_shallow>` and
+two alternate ways worth describing: :ref:`packaged archives<sources_archive>`
+and :ref:`a full git clone<sources_full>`. And the aspects ':ref:`wouldn't it
+be wiser to use a proper pre-release than the latest mainline code
+<sources_snapshot>`' and ':ref:`how to get an even fresher mainline codebase
+<sources_fresher>`' need elaboration, too.
+
+Note, to keep things simple the commands used in this guide store the build
+artifacts in the source tree. If you prefer to separate them, simply add
+something like ``O=~/linux-builddir/`` to all make calls; also adjust the path
+in all commands that add files or modify any generated (like your '.config').
+
+[:ref:`back to step-by-step guide <sources_sbs>`]
+
+.. _sources_shallow:
+
+Noteworthy characteristics of shallow clones
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The step-by-step guide uses a shallow clone, as it is the best solution for most
+of this document's target audience. There are a few aspects of this approach
+worth mentioning:
+
+ * This document in most places uses ``git fetch`` with ``--shallow-exclude=``
+   to specify the earliest version you care about (or to be precise: its git
+   tag). You alternatively can use the parameter ``--shallow-since=`` to specify
+   an absolute (say ``'2023-07-15'``) or relative (``'12 months'``) date to
+   define the depth of the history you want to download. As a second
+   alternative, you can also specify a certain depth explicitly with a parameter
+   like ``--depth=1``, unless you add branches for stable/longterm kernels.
+
+ * When running ``git fetch``, remember to always specify the oldest version,
+   the time you care about, or an explicit depth as shown in the step-by-step
+   guide. Otherwise you will risk downloading nearly the entire git history,
+   which will consume quite a bit of time and bandwidth while also stressing the
+   servers.
+
+   Note, you do not have to use the same version or date all the time. But when
+   you change it over time, git will deepen or flatten the history to the
+   specified point. That allows you to retrieve versions you initially thought
+   you did not need -- or it will discard the sources of older versions, for
+   example in case you want to free up some disk space. The latter will happen
+   automatically when using ``--shallow-since=`` or
+   ``--depth=``.
+
+ * Be warned, when deepening your clone you might encounter an error like
+   'fatal: error in object: unshallow cafecaca0c0dacafecaca0c0dacafecaca0c0da'.
+   In that case run ``git repack -d`` and try again``
+
+ * In case you want to revert changes from a certain version (say Linux 6.3) or
+   perform a bisection (v6.2..v6.3), better tell ``git fetch`` to retrieve
+   objects up to three versions earlier (e.g. 6.0): ``git describe`` will then
+   be able to describe most commits just like it would in a full git clone.
+
+[:ref:`back to step-by-step guide <sources_sbs>`] [:ref:`back to section intro <sources>`]
+
+.. _sources_archive:
+
+Downloading the sources using a packages archive
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+People new to compiling Linux often assume downloading an archive via the
+front-page of https://kernel.org is the best approach to retrieve Linux'
+sources. It actually can be, if you are certain to build just one particular
+kernel version without changing any code. Thing is: you might be sure this will
+be the case, but in practice it often will turn out to be a wrong assumption.
+
+That's because when reporting or debugging an issue developers will often ask to
+give another version a try. They also might suggest temporarily undoing a commit
+with ``git revert`` or might provide various patches to try. Sometimes reporters
+will also be asked to use ``git bisect`` to find the change causing a problem.
+These things rely on git or are a lot easier and quicker to handle with it.
+
+A shallow clone also does not add any significant overhead. For example, when
+you use ``git clone --depth=1`` to create a shallow clone of the latest mainline
+codebase git will only retrieve a little more data than downloading the latest
+mainline pre-release (aka 'rc') via the front-page of kernel.org would.
+
+A shallow clone therefore is often the better choice. If you nevertheless want
+to use a packaged source archive, download one via kernel.org; afterwards
+extract its content to some directory and change to the subdirectory created
+during extraction. The rest of the step-by-step guide will work just fine, apart
+from things that rely on git -- but this mainly concerns the section on
+successive builds of other versions.
+
+[:ref:`back to step-by-step guide <sources_sbs>`] [:ref:`back to section intro <sources>`]
+
+.. _sources_full:
+
+Downloading the sources using a full git clone
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If downloading and storing a lot of data (~4,4 Gigabyte as of early 2023) is
+nothing that bothers you, instead of a shallow clone perform a full git clone
+instead. You then will avoid the specialties mentioned above and will have all
+versions and individual commits at hand at any time::
+
+    curl -L \
+      https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/clone.bundle \
+      -o linux-stable.git.bundle
+    git clone clone.bundle ~/linux/
+    rm linux-stable.git.bundle
+    cd ~/linux/
+    git remote set-url origin
+    https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
+    git fetch origin
+    git checkout --detach origin/master
+
+[:ref:`back to step-by-step guide <sources_sbs>`] [:ref:`back to section intro <sources>`]
+
+.. _sources_snapshot:
+
+Proper pre-releases (RCs) vs. latest mainline
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When cloning the sources using git and checking out origin/master, you often
+will retrieve a codebase that is somewhere between the latest and the next
+release or pre-release. This almost always is the code you want when giving
+mainline a shot: pre-releases like v6.1-rc5 are in no way special, as they do
+not get any significant extra testing before being published.
+
+There is one exception: you might want to stick to the latest mainline release
+(say v6.1) before its successor's first pre-release (v6.2-rc1) is out. That is
+because compiler errors and other problems are more likely to occur during this
+time, as mainline then is in its 'merge window': a usually two week long phase,
+in which the bulk of the changes for the next release is merged.
+
+[:ref:`back to step-by-step guide <sources_sbs>`] [:ref:`back to section intro <sources>`]
+
+.. _sources_fresher:
+
+Avoiding the mainline lag
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The explanations for both the shallow clone and the full clone both retrieve the
+code from the Linux stable git repository. That makes things simpler for this
+document's audience, as it allows easy access to both mainline and
+stable/longterm releases. This approach has just one downside:
+
+Changes merged into the mainline repository are only synced to the master branch
+of the Linux stable repository  every few hours. This lag most of the time is
+not something to worry about; but in case you really need the latest code, just
+add the mainline repo as additional remote and checkout the code from there::
+
+    git remote add mainline \
+      https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
+    git fetch mainline
+    git checkout --detach mainline/master
+
+When doing this with a shallow clone, remember to call ``git fetch`` with one
+of the parameters described earlier to limit the depth.
+
+[:ref:`back to step-by-step guide <sources_sbs>`] [:ref:`back to section intro <sources>`]
+
+.. _patching:
+
+Patch the sources (optional)
+----------------------------
+
+  *In case you want to apply a kernel patch, do so now.*
+  [:ref:`...<patching_sbs>`]
+
+This is the point where you might want to patch your kernel -- for example when
+a developer proposed a fix and asked you to check if it helps. The step-by-step
+guide already explains everything crucial here.
+
+[:ref:`back to step-by-step guide <patching_sbs>`]
+
+.. _tagging:
+
+Tagging this kernel build (optional, often wise)
+------------------------------------------------
+
+  *If you patched your kernel or already have that kernel version installed,
+  better tag your kernel by extending its release name:*
+  [:ref:`...<tagging_sbs>`]
+
+Tagging your kernel will help avoid confusion later, especially when you patched
+your kernel. Adding an individual tag will also ensure the kernel's image and
+its modules are installed in parallel to any existing kernels.
+
+There are various ways to add such a tag. The step-by-step guide realizes one by
+creating a 'localversion' file in your build directory from which the kernel
+build scripts will automatically pick up the tag. You can later change that file
+to use a different tag in subsequent builds or simply remove that file to dump
+the tag.
+
+[:ref:`back to step-by-step guide <tagging_sbs>`]
+
+.. _configuration:
+
+Define the build configuration for your kernel
+----------------------------------------------
+
+  *Create the build configuration for your kernel based on an existing
+  configuration.* [:ref:`... <configuration_sbs>`]
+
+There are various aspects for this steps that require a more careful
+explanation:
+
+Pitfalls when using another configuration file as base
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Make targets like localmodconfig and olddefconfig share a few common snares you
+want to be aware of:
+
+ * These targets will reuse a kernel build configuration in your build directory
+   (e.g. '~/linux/.config'), if one exists. In case you want to start from
+   scratch you thus need to delete it.
+
+ * The make targets try to find the configuration for your running kernel
+   automatically, but might choose poorly. A line like '# using defaults found
+   in /boot/config-6.0.7-250.fc36.x86_64' or 'using config:
+   '/boot/config-6.0.7-250.fc36.x86_64' tells you which file they picked. If
+   that is not the intended one, simply store it as '~/linux/.config'
+   before using these make targets.
+
+ * Unexpected things might happen if you try to use a config file prepared for
+   one kernel (say v6.0) on an older generation (say v5.15). In that case you
+   might want to use a configuration as base which your distribution utilized
+   when they used that or an slightly older kernel version.
+
+Influencing the configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The make target olddefconfig and the ``yes "" |`` used when utilizing
+localmodconfig will set any undefined build options to their default value. This
+among others will disable many kernel features that were introduced after your
+base kernel was released.
+
+If you want to set these configurations options manually, use ``oldconfig``
+instead of ``olddefconfig`` or omit the ``yes "" |`` when utilizing
+localmodconfig. Then for each undefined configuration option you will be asked
+how to proceed. In case you are unsure what to answer, simply hit 'enter' to
+apply the default value.
+
+Big pitfall when using localmodconfig
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+As explained briefly in the step-by-step guide already: with localmodconfig it
+can easily happen that your self-built kernel will lack modules for tasks you
+did not perform before utilizing this make target. That's because those tasks
+require kernel modules that are normally autoloaded when you perform that task
+for the first time; if you didn't perform that task at least once before using
+localmodonfig, the latter will thus assume these modules are superfluous and
+disable them.
+
+You can try to avoid this by performing typical tasks that often will autoload
+additional kernel modules: start a VM, establish VPN connections, loop-mount a
+CD/DVD ISO, mount network shares (CIFS, NFS, ...), and connect all external
+devices (2FA keys, headsets, webcams, ...) as well as storage devices with file
+systems you otherwise do not utilize (btrfs, ext4, FAT, NTFS, XFS, ...). But it
+is hard to think of everything that might be needed -- even kernel developers
+often forget one thing or another at this point.
+
+Do not let that risk bother you, especially when compiling a kernel only for
+testing purposes: everything typically crucial will be there. And if you forget
+something important you can turn on a missing feature later and quickly run the
+commands to compile and install a better kernel.
+
+But if you plan to build and use self-built kernels regularly, you might want to
+reduce the risk by recording which modules your system loads over the course of
+a few weeks. You can automate this with `modprobed-db
+<https://github.com/graysky2/modprobed-db>`_. Afterwards use ``LSMOD=<path>`` to
+point localmodconfig to the list of modules modprobed-db noticed being used::
+
+    yes "" | make LSMOD="${HOME}"/.config/modprobed.db localmodconfig
+
+Remote building with localmodconfig
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If you want to use localmodconfig to build a kernel for another machine, run
+``lsmod > lsmod_foo-machine`` on it and transfer that file to your build host.
+Now point the build scripts to the file like this: ``yes "" | make
+LSMOD=~/lsmod_foo-machine localmodconfig``. Note, in this case
+you likely want to copy a base kernel configuration from the other machine over
+as well and place it as .config in your build directory.
+
+[:ref:`back to step-by-step guide <configuration_sbs>`]
+
+.. _configmods:
+
+Adjust build configuration
+--------------------------
+
+   *Check if you might want to or have to adjust some kernel configuration
+   options:*
+
+Depending on your needs you at this point might want or have to adjust some
+kernel configuration options.
+
+.. _configmods_debugsymbols:
+
+Debug symbols
+~~~~~~~~~~~~~
+
+   *Evaluate how you want to handle debug symbols.*
+   [:ref:`...<configmods_sbs>`]
+
+Most users do not need to care about this, it's often fine to leave everything
+as it is; but you should take a closer look at this, if you might need to decode
+a stack trace or want to reduce space consumption.
+
+Having debug symbols available can be important when your kernel throws a
+'panic', 'Oops', 'warning', or 'BUG' later when running, as then you will be
+able to find the exact place where the problem occurred in the code. But
+collecting and embedding the needed debug information takes time and consumes
+quite a bit of space: in late 2022 the build artifacts for a typical x86 kernel
+configured with localmodconfig consumed around 5 Gigabyte of space with debug
+symbols, but less than 1 when they were disabled. The resulting kernel image and
+the modules are bigger as well, which increases load times.
+
+Hence, if you want a small kernel and are unlikely to decode a stack trace
+later, you might want to disable debug symbols to avoid above downsides::
+
+    ./scripts/config --file .config -d DEBUG_INFO \
+      -d DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT -d DEBUG_INFO_DWARF4 \
+      -d DEBUG_INFO_DWARF5 -e CONFIG_DEBUG_INFO_NONE
+    make olddefconfig
+
+You on the other hand definitely want to enable them, if there is a decent
+chance that you need to decode a stack trace later (as explained by 'Decode
+failure messages' in Documentation/admin-guide/tainted-kernels.rst in more
+detail)::
+
+    ./scripts/config --file .config -d DEBUG_INFO_NONE -e DEBUG_KERNEL
+      -e DEBUG_INFO -e DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT -e KALLSYMS -e KALLSYMS_ALL
+    make olddefconfig
+
+Note, many mainstream distributions enable debug symbols in their kernel
+configurations -- make targets like localmodconfig and olddefconfig thus will
+often pick that setting up.
+
+[:ref:`back to step-by-step guide <configmods_sbs>`]
+
+.. _configmods_distros:
+
+Distro specific adjustments
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+   *Are you running* [:ref:`... <configmods_sbs>`]
+
+The following sections help you to avoid build problems that are known to occur
+when following this guide on a few commodity distributions.
+
+**Debian:**
+
+ * Remove a stale reference to a certificate file that would cause your build to
+   fail::
+
+    ./scripts/config --file .config --set-str SYSTEM_TRUSTED_KEYS ''
+
+   Alternatively, download the needed certificate and make that configuration
+   option point to it, as `the Debian handbook explains in more detail
+   <https://debian-handbook.info/browse/stable/sect.kernel-compilation.html>`_
+   -- or generate your own, as explained in
+   Documentation/admin-guide/module-signing.rst.
+
+[:ref:`back to step-by-step guide <configmods_sbs>`]
+
+.. _configmods_individual:
+
+Individual adjustments
+~~~~~~~~~~~~~~~~~~~~~~
+
+   *If you want to influence the other aspects of the configuration, do so
+   now* [:ref:`... <configmods_sbs>`]
+
+You at this point can use a command like ``make menuconfig`` to enable or
+disable certain features using a text-based user interface; to use a graphical
+configuration utilize, use the make target ``xconfig`` or ``gconfig`` instead.
+All of them require development libraries from toolkits they are based on
+(ncurses, Qt5, Gtk2); an error message will tell you if something required is
+missing.
+
+[:ref:`back to step-by-step guide <configmods_sbs>`]
+
+.. _build:
+
+Build your kernel
+-----------------
+
+  *Build the image and the modules of your kernel* [:ref:`... <build_sbs>`]
+
+A lot can go wrong at this stage, but the instructions below will help you help
+yourself. Another subsection explains how to directly package your kernel up as
+deb, rpm or tar file.
+
+Dealing with build errors
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When a build error occurs, it might be caused by some aspect of your machine's
+setup that often can be fixed quickly; other times though the problem lies in
+the code and can only be fixed by a developer. A close examination of the
+failure messages coupled with some research on the internet will often tell you
+which of the two it is. To perform such a investigation, restart the build
+process like this::
+
+    make V=1
+
+The ``V=1`` activates verbose output, which might be needed to see the actual
+error. To make it easier to spot, this command also omits the ``-j $(nproc
+--all)`` used earlier to utilize every CPU core in the system for the job -- but
+this parallelism also results in some clutter when failures occur.
+
+After a few seconds the build process should run into the error again. Now try
+to find the most crucial line describing the problem. Then search the internet
+for the most important and non-generic section of that line (say 4 to 8 words);
+avoid or remove anything that looks remotely system-specific, like your username
+or local path names like ``/home/username/linux/``. First try your regular
+internet search engine with that string, afterwards search Linux kernel mailing
+lists via `lore.kernel.org/all/ <https://lore.kernel.org/all/>`_.
+
+This most of the time will find something that will explain what is wrong; quite
+often one of the hits will provide a solution for your problem, too. If you
+do not find anything that matches your problem, try again from a different angle
+by modifying your search terms or using another line from the error messages.
+
+In the end, most trouble you are to run into has likely been encountered and
+reported by others already. That includes issues where the cause is not your
+system, but lies the code. If you run into one of those, you might thus find a
+solution (e.g. a patch) or workaround for your problem, too.
+
+Package your kernel up
+~~~~~~~~~~~~~~~~~~~~~~
+
+The step-by-step guide uses the default make targets (e.g. 'bzImage' and
+'modules' on x86) to build the image and the modules of your kernel, which later
+steps of the guide then install. You instead can also directly build everything
+and directly package it up by using one of the following targets:
+
+ * ``make -j $(nproc --all) bindeb-pkg`` to generate a deb package
+
+ * ``make -j $(nproc --all) binrpm-pkg`` to generate a rpm package
+
+ * ``make -j $(nproc --all) tarbz2-pkg`` to generate a bz2 compressed tarball
+
+This is just a selection of available make targets for this purpose, see
+``make help`` for others. You can also use these targets after running
+``make -j $(nproc --all)``, as they will pick up everything already built.
+
+If you employ the targets to generate deb or rpm packages, ignore the
+step-by-step guide's instructions on installing and removing your kernel;
+instead install and remove the packages using the package utility for the format
+(e.g. dpkg and rpm) or a package management utility build on top of them (apt,
+aptitude, dnf/yum, zypper, ...). Be aware that the packages generated using
+these two make targets are designed to work on various distributions utilizing
+those formats, they thus will sometimes behave differently than your
+distribution's kernel packages.
+
+[:ref:`back to step-by-step guide <build_sbs>`]
+
+.. _install:
+
+Install your kernel
+-------------------
+
+  *Now install your kernel* [:ref:`... <install_sbs>`]
+
+What you need to do after executing the command in the step-by-step guide
+depends on the existence and the implementation of an ``installkernel``
+executable. Many commodity Linux distributions ship such a kernel installer in
+``/sbin/`` that does everything needed, hence there is nothing left for you
+except rebooting. But some distributions contain an installkernel that does
+only part of the job -- and a few lack it completely and leave all the work to
+you.
+
+If ``installkernel`` is found, the kernel's build system will delegate the
+actual installation of your kernel's image and related files to this executable.
+On almost all Linux distributions it will store the image as '/boot/vmlinuz-
+<your kernel's release name>' and put a 'System.map-<your kernel's release
+name>' alongside it. Your kernel will thus be installed in parallel to any
+existing ones, unless you already have one with exactly the same release name.
+
+Installkernel on many distributions will afterwards generate an 'initramfs'
+(often also called 'initrd'), which commodity distributions rely on for booting;
+hence be sure to keep the order of the two make targets used in the step-by-step
+guide, as things will go sideways if you install your kernel's image before its
+modules. Often installkernel will then add your kernel to the bootloader
+configuration, too. You have to take care of one or both of these tasks
+yourself, if your distributions installkernel doesn't handle them.
+
+A few distributions like Arch Linux and its derivatives totally lack an
+installkernel executable. On those just install the modules using the kernel's
+build system and then install the image and the System.map file manually::
+
+     sudo make modules_install
+     sudo install -m 0600 $(make -s image_name) /boot/vmlinuz-$(make -s kernelrelease)
+     sudo install -m 0600 System.map /boot/System.map-$(make -s kernelrelease)
+
+If your distribution boots with the help of an initramfs, now generate one for
+your kernel using the tools your distribution provides for this process.
+Afterwards add your kernel to your bootloader configuration and reboot.
+
+[:ref:`back to step-by-step guide <install_sbs>`]
+
+.. _another:
+
+Another round later
+-------------------
+
+  *To later build another kernel you need similar, but sometimes slightly
+  different commands* [:ref:`... <another_sbs>`]
+
+The process to build later kernels is similar, but at some points slightly
+different. You for example do not want to use 'localmodconfig' for succeeding
+kernel builds, as you already created a trimmed down configuration you want to
+use from now on. Hence instead just use ``oldconfig`` or ``olddefconfig`` to
+adjust your build configurations to the needs of the kernel version you are
+about to build.
+
+If you created a shallow-clone with git, remember what the :ref:`section that
+explained the setup described in more detail <sources>`: you need to use a
+slightly different ``git fetch`` command and when switching to another series
+need to add an additional remote branch.
+
+[:ref:`back to step-by-step guide <another_sbs>`]
+
+.. _uninstall:
+
+Uninstall the kernel later
+--------------------------
+
+  *All parts of your installed kernel are identifiable by its release name and
+  thus easy to remove later.* [:ref:`... <uninstall_sbs>`]
+
+Do not worry installing your kernel manually and thus bypassing your
+distribution's packaging system will totally mess up your machine: all parts of
+your kernel are easy to remove later, as files are stored in two places only and
+normally identifiable by the kernel's release name.
+
+One of the two places is a directory in /lib/modules/, which holds the modules
+for each installed kernel. This directory is named after the kernel's release
+name; hence, to remove all modules for one of your kernels, simply remove its
+modules directory in /lib/modules/.
+
+The other place is /boot/, where typically one to five files will be placed
+during installation of a kernel. All of them usually contain the release name in
+their file name, but how many files and their name depends somewhat on your
+distribution's installkernel executable (:ref:`see above <install>`) and its
+initramfs generator. On some distributions the ``kernel-install`` command
+mentioned in the step-by-step guide will remove all of these files for you --
+and the entry for your kernel in the bootloader configuration at the same time,
+too. On others you have to take care of these steps yourself. The following
+command should interactively remove the two main files of a kernel with the
+release name '6.0.1-foobar'::
+
+    rm -i /boot/{System.map,vmlinuz}-6.0.1-foobar
+
+Now remove the belonging initramfs, which often will be called something like
+``/boot/initramfs-6.0.1-foobar.img`` or ``/boot/initrd.img-6.0.1-foobar``.
+Afterwards check for other files in /boot/ that have '6.0.1-foobar' in their
+name and delete them as well. Now remove the kernel from your bootloader's
+configuration.
+
+Note, be very careful with wildcards like '*' when deleting files or directories
+for kernels manually: you might accidentally remove files of a 6.0.11 kernel
+when all you want is to remove 6.0 or 6.0.1.
+
+[:ref:`back to step-by-step guide <uninstall_sbs>`]
+
+.. _faq:
+
+FAQ
+===
+
+Why does this 'how-to' not work on my system?
+---------------------------------------------
+
+As initially stated, this guide is 'designed to cover everything typically
+needed [to build a kernel] on mainstream Linux distributions running on
+commodity PC or server hardware'. The outlined approach despite this should work
+on many other setups as well. But trying to cover every possible use-case in one
+guide would defeat its purpose, as without such a focus you would need dozens or
+hundreds of constructs along the lines of 'in case you are having <insert
+machine or distro>, you at this point have to do <this and that>
+<instead|additionally>'. Each of which would make the text longer, more
+complicated, and harder to follow.
+
+That being said: this of course is a balancing act. Hence, if you think an
+additional use-case is worth describing, suggest it to the maintainers of this
+document, as :ref:`described above <submit_improvements>`.
+
+
+..
+   end-of-content
+..
+   This document is maintained by Thorsten Leemhuis <linux@leemhuis.info>. If
+   you spot a typo or small mistake, feel free to let him know directly and
+   he'll fix it. You are free to do the same in a mostly informal way if you
+   want to contribute changes to the text -- but for copyright reasons please CC
+   linux-doc@vger.kernel.org and 'sign-off' your contribution as
+   Documentation/process/submitting-patches.rst explains in the section 'Sign
+   your work - the Developer's Certificate of Origin'.
+..
+   This text is available under GPL-2.0+ or CC-BY-4.0, as stated at the top
+   of the file. If you want to distribute this text under CC-BY-4.0 only,
+   please use 'The Linux kernel development community' for author attribution
+   and link this as source:
+   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/plain/Documentation/admin-guide/quickly-build-trimmed-linux.rst
+..
+   Note: Only the content of this RST file as found in the Linux kernel sources
+   is available under CC-BY-4.0, as versions of this text that were processed
+   (for example by the kernel's build system) might contain content taken from
+   files which use a more restrictive license.
+
diff --git a/Documentation/admin-guide/ramoops.rst b/Documentation/admin-guide/ramoops.rst
index 8f107d8c9261..e9f85142182d 100644
--- a/Documentation/admin-guide/ramoops.rst
+++ b/Documentation/admin-guide/ramoops.rst
@@ -69,7 +69,7 @@ Setting the ramoops parameters can be done in several different manners:
 	mem=128M ramoops.mem_address=0x8000000 ramoops.ecc=1
 
  B. Use Device Tree bindings, as described in
- ``Documentation/devicetree/bindings/reserved-memory/ramoops.txt``.
+ ``Documentation/devicetree/bindings/reserved-memory/ramoops.yaml``.
  For example::
 
 	reserved-memory {
diff --git a/Documentation/admin-guide/ras.rst b/Documentation/admin-guide/ras.rst
index 7b481b2a368e..8e03751d126d 100644
--- a/Documentation/admin-guide/ras.rst
+++ b/Documentation/admin-guide/ras.rst
@@ -199,7 +199,7 @@ Architecture (MCA)\ [#f3]_.
   mode).
 
 .. [#f3] For more details about the Machine Check Architecture (MCA),
-  please read Documentation/x86/x86_64/machinecheck.rst at the Kernel tree.
+  please read Documentation/arch/x86/x86_64/machinecheck.rst at the Kernel tree.
 
 EDAC - Error Detection And Correction
 *************************************
diff --git a/Documentation/admin-guide/reporting-issues.rst b/Documentation/admin-guide/reporting-issues.rst
index d7ac13f789cc..2fd5a030235a 100644
--- a/Documentation/admin-guide/reporting-issues.rst
+++ b/Documentation/admin-guide/reporting-issues.rst
@@ -1,14 +1,5 @@
 .. SPDX-License-Identifier: (GPL-2.0+ OR CC-BY-4.0)
-..
-   If you want to distribute this text under CC-BY-4.0 only, please use 'The
-   Linux kernel developers' for author attribution and link this as source:
-   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/plain/Documentation/admin-guide/reporting-issues.rst
-..
-   Note: Only the content of this RST file as found in the Linux kernel sources
-   is available under CC-BY-4.0, as versions of this text that were processed
-   (for example by the kernel's build system) might contain content taken from
-   files which use a more restrictive license.
-
+.. See the bottom of this file for additional redistribution information.
 
 Reporting issues
 ++++++++++++++++
@@ -395,22 +386,16 @@ fixed as soon as possible, hence there are 'issues of high priority' that get
 handled slightly differently in the reporting process. Three type of cases
 qualify: regressions, security issues, and really severe problems.
 
-You deal with a 'regression' if something that worked with an older version of
-the Linux kernel does not work with a newer one or somehow works worse with it.
-It thus is a regression when a WiFi driver that did a fine job with Linux 5.7
-somehow misbehaves with 5.8 or doesn't work at all. It's also a regression if
-an application shows erratic behavior with a newer kernel, which might happen
-due to incompatible changes in the interface between the kernel and the
-userland (like procfs and sysfs). Significantly reduced performance or
-increased power consumption also qualify as regression. But keep in mind: the
-new kernel needs to be built with a configuration that is similar to the one
-from the old kernel (see below how to achieve that). That's because the kernel
-developers sometimes can not avoid incompatibilities when implementing new
-features; but to avoid regressions such features have to be enabled explicitly
-during build time configuration.
+You deal with a regression if some application or practical use case running
+fine with one Linux kernel works worse or not at all with a newer version
+compiled using a similar configuration. The document
+Documentation/admin-guide/reporting-regressions.rst explains this in more
+detail. It also provides a good deal of other information about regressions you
+might want to be aware of; it for example explains how to add your issue to the
+list of tracked regressions, to ensure it won't fall through the cracks.
 
 What qualifies as security issue is left to your judgment. Consider reading
-'Documentation/admin-guide/security-bugs.rst' before proceeding, as it
+Documentation/process/security-bugs.rst before proceeding, as it
 provides additional details how to best handle security issues.
 
 An issue is a 'really severe problem' when something totally unacceptably bad
@@ -517,7 +502,7 @@ line starting with 'CPU:'. It should end with 'Not tainted' if the kernel was
 not tainted when it noticed the problem; it was tainted if you see 'Tainted:'
 followed by a few spaces and some letters.
 
-If your kernel is tainted, study 'Documentation/admin-guide/tainted-kernels.rst'
+If your kernel is tainted, study Documentation/admin-guide/tainted-kernels.rst
 to find out why. Try to eliminate the reason. Often it's caused by one these
 three things:
 
@@ -1043,7 +1028,7 @@ down the culprit, as maintainers often won't have the time or setup at hand to
 reproduce it themselves.
 
 To find the change there is a process called 'bisection' which the document
-'Documentation/admin-guide/bug-bisect.rst' describes in detail. That process
+Documentation/admin-guide/bug-bisect.rst describes in detail. That process
 will often require you to build about ten to twenty kernel images, trying to
 reproduce the issue with each of them before building the next. Yes, that takes
 some time, but don't worry, it works a lot quicker than most people assume.
@@ -1073,10 +1058,11 @@ When dealing with regressions make sure the issue you face is really caused by
 the kernel and not by something else, as outlined above already.
 
 In the whole process keep in mind: an issue only qualifies as regression if the
-older and the newer kernel got built with a similar configuration. The best way
-to archive this: copy the configuration file (``.config``) from the old working
-kernel freshly to each newer kernel version you try. Afterwards run ``make
-olddefconfig`` to adjust it for the needs of the new version.
+older and the newer kernel got built with a similar configuration. This can be
+achieved by using ``make olddefconfig``, as explained in more detail by
+Documentation/admin-guide/reporting-regressions.rst; that document also
+provides a good deal of other information about regressions you might want to be
+aware of.
 
 
 Write and send the report
@@ -1283,7 +1269,7 @@ them when sending the report by mail. If you filed it in a bug tracker, forward
 the report's text to these addresses; but on top of it put a small note where
 you mention that you filed it with a link to the ticket.
 
-See 'Documentation/admin-guide/security-bugs.rst' for more information.
+See Documentation/process/security-bugs.rst for more information.
 
 
 Duties after the report went out
@@ -1571,7 +1557,7 @@ Once your report is out your might get asked to do a proper one, as it allows to
 pinpoint the exact change that causes the issue (which then can easily get
 reverted to fix the issue quickly). Hence consider to do a proper bisection
 right away if time permits. See the section 'Special care for regressions' and
-the document 'Documentation/admin-guide/bug-bisect.rst' for details how to
+the document Documentation/admin-guide/bug-bisect.rst for details how to
 perform one. In case of a successful bisection add the author of the culprit to
 the recipients; also CC everyone in the signed-off-by chain, which you find at
 the end of its commit message.
@@ -1594,7 +1580,7 @@ Some fixes are too complex
 Even small and seemingly obvious code-changes sometimes introduce new and
 totally unexpected problems. The maintainers of the stable and longterm kernels
 are very aware of that and thus only apply changes to these kernels that are
-within rules outlined in 'Documentation/process/stable-kernel-rules.rst'.
+within rules outlined in Documentation/process/stable-kernel-rules.rst.
 
 Complex or risky changes for example do not qualify and thus only get applied
 to mainline. Other fixes are easy to get backported to the newest stable and
@@ -1756,10 +1742,23 @@ art will lay some groundwork to improve the situation over time.
 
 
 ..
-   This text is maintained by Thorsten Leemhuis <linux@leemhuis.info>. If you
-   spot a typo or small mistake, feel free to let him know directly and he'll
-   fix it. You are free to do the same in a mostly informal way if you want
-   to contribute changes to the text, but for copyright reasons please CC
+   end-of-content
+..
+   This document is maintained by Thorsten Leemhuis <linux@leemhuis.info>. If
+   you spot a typo or small mistake, feel free to let him know directly and
+   he'll fix it. You are free to do the same in a mostly informal way if you
+   want to contribute changes to the text, but for copyright reasons please CC
    linux-doc@vger.kernel.org and "sign-off" your contribution as
    Documentation/process/submitting-patches.rst outlines in the section "Sign
    your work - the Developer's Certificate of Origin".
+..
+   This text is available under GPL-2.0+ or CC-BY-4.0, as stated at the top
+   of the file. If you want to distribute this text under CC-BY-4.0 only,
+   please use "The Linux kernel developers" for author attribution and link
+   this as source:
+   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/plain/Documentation/admin-guide/reporting-issues.rst
+..
+   Note: Only the content of this RST file as found in the Linux kernel sources
+   is available under CC-BY-4.0, as versions of this text that were processed
+   (for example by the kernel's build system) might contain content taken from
+   files which use a more restrictive license.
diff --git a/Documentation/admin-guide/reporting-regressions.rst b/Documentation/admin-guide/reporting-regressions.rst
new file mode 100644
index 000000000000..d8adccdae23f
--- /dev/null
+++ b/Documentation/admin-guide/reporting-regressions.rst
@@ -0,0 +1,451 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR CC-BY-4.0)
+.. [see the bottom of this file for redistribution information]
+
+Reporting regressions
++++++++++++++++++++++
+
+"*We don't cause regressions*" is the first rule of Linux kernel development;
+Linux founder and lead developer Linus Torvalds established it himself and
+ensures it's obeyed.
+
+This document describes what the rule means for users and how the Linux kernel's
+development model ensures to address all reported regressions; aspects relevant
+for kernel developers are left to Documentation/process/handling-regressions.rst.
+
+
+The important bits (aka "TL;DR")
+================================
+
+#. It's a regression if something running fine with one Linux kernel works worse
+   or not at all with a newer version. Note, the newer kernel has to be compiled
+   using a similar configuration; the detailed explanations below describes this
+   and other fine print in more detail.
+
+#. Report your issue as outlined in Documentation/admin-guide/reporting-issues.rst,
+   it already covers all aspects important for regressions and repeated
+   below for convenience. Two of them are important: start your report's subject
+   with "[REGRESSION]" and CC or forward it to `the regression mailing list
+   <https://lore.kernel.org/regressions/>`_ (regressions@lists.linux.dev).
+
+#. Optional, but recommended: when sending or forwarding your report, make the
+   Linux kernel regression tracking bot "regzbot" track the issue by specifying
+   when the regression started like this::
+
+       #regzbot introduced v5.13..v5.14-rc1
+
+
+All the details on Linux kernel regressions relevant for users
+==============================================================
+
+
+The important basics
+--------------------
+
+
+What is a "regression" and what is the "no regressions rule"?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+It's a regression if some application or practical use case running fine with
+one Linux kernel works worse or not at all with a newer version compiled using a
+similar configuration. The "no regressions rule" forbids this to take place; if
+it happens by accident, developers that caused it are expected to quickly fix
+the issue.
+
+It thus is a regression when a WiFi driver from Linux 5.13 works fine, but with
+5.14 doesn't work at all, works significantly slower, or misbehaves somehow.
+It's also a regression if a perfectly working application suddenly shows erratic
+behavior with a newer kernel version; such issues can be caused by changes in
+procfs, sysfs, or one of the many other interfaces Linux provides to userland
+software. But keep in mind, as mentioned earlier: 5.14 in this example needs to
+be built from a configuration similar to the one from 5.13. This can be achieved
+using ``make olddefconfig``, as explained in more detail below.
+
+Note the "practical use case" in the first sentence of this section: developers
+despite the "no regressions" rule are free to change any aspect of the kernel
+and even APIs or ABIs to userland, as long as no existing application or use
+case breaks.
+
+Also be aware the "no regressions" rule covers only interfaces the kernel
+provides to the userland. It thus does not apply to kernel-internal interfaces
+like the module API, which some externally developed drivers use to hook into
+the kernel.
+
+How do I report a regression?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Just report the issue as outlined in
+Documentation/admin-guide/reporting-issues.rst, it already describes the
+important points. The following aspects outlined there are especially relevant
+for regressions:
+
+ * When checking for existing reports to join, also search the `archives of the
+   Linux regressions mailing list <https://lore.kernel.org/regressions/>`_ and
+   `regzbot's web-interface <https://linux-regtracking.leemhuis.info/regzbot/>`_.
+
+ * Start your report's subject with "[REGRESSION]".
+
+ * In your report, clearly mention the last kernel version that worked fine and
+   the first broken one. Ideally try to find the exact change causing the
+   regression using a bisection, as explained below in more detail.
+
+ * Remember to let the Linux regressions mailing list
+   (regressions@lists.linux.dev) know about your report:
+
+   * If you report the regression by mail, CC the regressions list.
+
+   * If you report your regression to some bug tracker, forward the submitted
+     report by mail to the regressions list while CCing the maintainer and the
+     mailing list for the subsystem in question.
+
+   If it's a regression within a stable or longterm series (e.g.
+   v5.15.3..v5.15.5), remember to CC the `Linux stable mailing list
+   <https://lore.kernel.org/stable/>`_ (stable@vger.kernel.org).
+
+  In case you performed a successful bisection, add everyone to the CC the
+  culprit's commit message mentions in lines starting with "Signed-off-by:".
+
+When CCing for forwarding your report to the list, consider directly telling the
+aforementioned Linux kernel regression tracking bot about your report. To do
+that, include a paragraph like this in your mail::
+
+       #regzbot introduced: v5.13..v5.14-rc1
+
+Regzbot will then consider your mail a report for a regression introduced in the
+specified version range. In above case Linux v5.13 still worked fine and Linux
+v5.14-rc1 was the first version where you encountered the issue. If you
+performed a bisection to find the commit that caused the regression, specify the
+culprit's commit-id instead::
+
+       #regzbot introduced: 1f2e3d4c5d
+
+Placing such a "regzbot command" is in your interest, as it will ensure the
+report won't fall through the cracks unnoticed. If you omit this, the Linux
+kernel's regressions tracker will take care of telling regzbot about your
+regression, as long as you send a copy to the regressions mailing lists. But the
+regression tracker is just one human which sometimes has to rest or occasionally
+might even enjoy some time away from computers (as crazy as that might sound).
+Relying on this person thus will result in an unnecessary delay before the
+regressions becomes mentioned `on the list of tracked and unresolved Linux
+kernel regressions <https://linux-regtracking.leemhuis.info/regzbot/>`_ and the
+weekly regression reports sent by regzbot. Such delays can result in Linus
+Torvalds being unaware of important regressions when deciding between "continue
+development or call this finished and release the final?".
+
+Are really all regressions fixed?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Nearly all of them are, as long as the change causing the regression (the
+"culprit commit") is reliably identified. Some regressions can be fixed without
+this, but often it's required.
+
+Who needs to find the root cause of a regression?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Developers of the affected code area should try to locate the culprit on their
+own. But for them that's often impossible to do with reasonable effort, as quite
+a lot of issues only occur in a particular environment outside the developer's
+reach -- for example, a specific hardware platform, firmware, Linux distro,
+system's configuration, or application. That's why in the end it's often up to
+the reporter to locate the culprit commit; sometimes users might even need to
+run additional tests afterwards to pinpoint the exact root cause. Developers
+should offer advice and reasonably help where they can, to make this process
+relatively easy and achievable for typical users.
+
+How can I find the culprit?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Perform a bisection, as roughly outlined in
+Documentation/admin-guide/reporting-issues.rst and described in more detail by
+Documentation/admin-guide/bug-bisect.rst. It might sound like a lot of work, but
+in many cases finds the culprit relatively quickly. If it's hard or
+time-consuming to reliably reproduce the issue, consider teaming up with other
+affected users to narrow down the search range together.
+
+Who can I ask for advice when it comes to regressions?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Send a mail to the regressions mailing list (regressions@lists.linux.dev) while
+CCing the Linux kernel's regression tracker (regressions@leemhuis.info); if the
+issue might better be dealt with in private, feel free to omit the list.
+
+
+Additional details about regressions
+------------------------------------
+
+
+What is the goal of the "no regressions rule"?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Users should feel safe when updating kernel versions and not have to worry
+something might break. This is in the interest of the kernel developers to make
+updating attractive: they don't want users to stay on stable or longterm Linux
+series that are either abandoned or more than one and a half years old. That's
+in everybody's interest, as `those series might have known bugs, security
+issues, or other problematic aspects already fixed in later versions
+<http://www.kroah.com/log/blog/2018/08/24/what-stable-kernel-should-i-use/>`_.
+Additionally, the kernel developers want to make it simple and appealing for
+users to test the latest pre-release or regular release. That's also in
+everybody's interest, as it's a lot easier to track down and fix problems, if
+they are reported shortly after being introduced.
+
+Is the "no regressions" rule really adhered in practice?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+It's taken really seriously, as can be seen by many mailing list posts from
+Linux creator and lead developer Linus Torvalds, some of which are quoted in
+Documentation/process/handling-regressions.rst.
+
+Exceptions to this rule are extremely rare; in the past developers almost always
+turned out to be wrong when they assumed a particular situation was warranting
+an exception.
+
+Who ensures the "no regressions" is actually followed?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The subsystem maintainers should take care of that, which are watched and
+supported by the tree maintainers -- e.g. Linus Torvalds for mainline and
+Greg Kroah-Hartman et al. for various stable/longterm series.
+
+All of them are helped by people trying to ensure no regression report falls
+through the cracks. One of them is Thorsten Leemhuis, who's currently acting as
+the Linux kernel's "regressions tracker"; to facilitate this work he relies on
+regzbot, the Linux kernel regression tracking bot. That's why you want to bring
+your report on the radar of these people by CCing or forwarding each report to
+the regressions mailing list, ideally with a "regzbot command" in your mail to
+get it tracked immediately.
+
+How quickly are regressions normally fixed?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Developers should fix any reported regression as quickly as possible, to provide
+affected users with a solution in a timely manner and prevent more users from
+running into the issue; nevertheless developers need to take enough time and
+care to ensure regression fixes do not cause additional damage.
+
+The answer thus depends on various factors like the impact of a regression, its
+age, or the Linux series in which it occurs. In the end though, most regressions
+should be fixed within two weeks.
+
+Is it a regression, if the issue can be avoided by updating some software?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Almost always: yes. If a developer tells you otherwise, ask the regression
+tracker for advice as outlined above.
+
+Is it a regression, if a newer kernel works slower or consumes more energy?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Yes, but the difference has to be significant. A five percent slow-down in a
+micro-benchmark thus is unlikely to qualify as regression, unless it also
+influences the results of a broad benchmark by more than one percent. If in
+doubt, ask for advice.
+
+Is it a regression, if an external kernel module breaks when updating Linux?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+No, as the "no regression" rule is about interfaces and services the Linux
+kernel provides to the userland. It thus does not cover building or running
+externally developed kernel modules, as they run in kernel-space and hook into
+the kernel using internal interfaces occasionally changed.
+
+How are regressions handled that are caused by security fixes?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+In extremely rare situations security issues can't be fixed without causing
+regressions; those fixes are given way, as they are the lesser evil in the end.
+Luckily this middling almost always can be avoided, as key developers for the
+affected area and often Linus Torvalds himself try very hard to fix security
+issues without causing regressions.
+
+If you nevertheless face such a case, check the mailing list archives if people
+tried their best to avoid the regression. If not, report it; if in doubt, ask
+for advice as outlined above.
+
+What happens if fixing a regression is impossible without causing another?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Sadly these things happen, but luckily not very often; if they occur, expert
+developers of the affected code area should look into the issue to find a fix
+that avoids regressions or at least their impact. If you run into such a
+situation, do what was outlined already for regressions caused by security
+fixes: check earlier discussions if people already tried their best and ask for
+advice if in doubt.
+
+A quick note while at it: these situations could be avoided, if people would
+regularly give mainline pre-releases (say v5.15-rc1 or -rc3) from each
+development cycle a test run. This is best explained by imagining a change
+integrated between Linux v5.14 and v5.15-rc1 which causes a regression, but at
+the same time is a hard requirement for some other improvement applied for
+5.15-rc1. All these changes often can simply be reverted and the regression thus
+solved, if someone finds and reports it before 5.15 is released. A few days or
+weeks later this solution can become impossible, as some software might have
+started to rely on aspects introduced by one of the follow-up changes: reverting
+all changes would then cause a regression for users of said software and thus is
+out of the question.
+
+Is it a regression, if some feature I relied on was removed months ago?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+It is, but often it's hard to fix such regressions due to the aspects outlined
+in the previous section. It hence needs to be dealt with on a case-by-case
+basis. This is another reason why it's in everybody's interest to regularly test
+mainline pre-releases.
+
+Does the "no regression" rule apply if I seem to be the only affected person?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+It does, but only for practical usage: the Linux developers want to be free to
+remove support for hardware only to be found in attics and museums anymore.
+
+Note, sometimes regressions can't be avoided to make progress -- and the latter
+is needed to prevent Linux from stagnation. Hence, if only very few users seem
+to be affected by a regression, it for the greater good might be in their and
+everyone else's interest to lettings things pass. Especially if there is an
+easy way to circumvent the regression somehow, for example by updating some
+software or using a kernel parameter created just for this purpose.
+
+Does the regression rule apply for code in the staging tree as well?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Not according to the `help text for the configuration option covering all
+staging code <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/staging/Kconfig>`_,
+which since its early days states::
+
+       Please note that these drivers are under heavy development, may or
+       may not work, and may contain userspace interfaces that most likely
+       will be changed in the near future.
+
+The staging developers nevertheless often adhere to the "no regressions" rule,
+but sometimes bend it to make progress. That's for example why some users had to
+deal with (often negligible) regressions when a WiFi driver from the staging
+tree was replaced by a totally different one written from scratch.
+
+Why do later versions have to be "compiled with a similar configuration"?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Because the Linux kernel developers sometimes integrate changes known to cause
+regressions, but make them optional and disable them in the kernel's default
+configuration. This trick allows progress, as the "no regressions" rule
+otherwise would lead to stagnation.
+
+Consider for example a new security feature blocking access to some kernel
+interfaces often abused by malware, which at the same time are required to run a
+few rarely used applications. The outlined approach makes both camps happy:
+people using these applications can leave the new security feature off, while
+everyone else can enable it without running into trouble.
+
+How to create a configuration similar to the one of an older kernel?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Start your machine with a known-good kernel and configure the newer Linux
+version with ``make olddefconfig``. This makes the kernel's build scripts pick
+up the configuration file (the ".config" file) from the running kernel as base
+for the new one you are about to compile; afterwards they set all new
+configuration options to their default value, which should disable new features
+that might cause regressions.
+
+Can I report a regression I found with pre-compiled vanilla kernels?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+You need to ensure the newer kernel was compiled with a similar configuration
+file as the older one (see above), as those that built them might have enabled
+some known-to-be incompatible feature for the newer kernel. If in doubt, report
+the matter to the kernel's provider and ask for advice.
+
+
+More about regression tracking with "regzbot"
+---------------------------------------------
+
+What is regression tracking and why should I care about it?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Rules like "no regressions" need someone to ensure they are followed, otherwise
+they are broken either accidentally or on purpose. History has shown this to be
+true for Linux kernel development as well. That's why Thorsten Leemhuis, the
+Linux Kernel's regression tracker, and some people try to ensure all regression
+are fixed by keeping an eye on them until they are resolved. Neither of them are
+paid for this, that's why the work is done on a best effort basis.
+
+Why and how are Linux kernel regressions tracked using a bot?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Tracking regressions completely manually has proven to be quite hard due to the
+distributed and loosely structured nature of Linux kernel development process.
+That's why the Linux kernel's regression tracker developed regzbot to facilitate
+the work, with the long term goal to automate regression tracking as much as
+possible for everyone involved.
+
+Regzbot works by watching for replies to reports of tracked regressions.
+Additionally, it's looking out for posted or committed patches referencing such
+reports with "Link:" tags; replies to such patch postings are tracked as well.
+Combined this data provides good insights into the current state of the fixing
+process.
+
+How to see which regressions regzbot tracks currently?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Check out `regzbot's web-interface <https://linux-regtracking.leemhuis.info/regzbot/>`_.
+
+What kind of issues are supposed to be tracked by regzbot?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The bot is meant to track regressions, hence please don't involve regzbot for
+regular issues. But it's okay for the Linux kernel's regression tracker if you
+involve regzbot to track severe issues, like reports about hangs, corrupted
+data, or internal errors (Panic, Oops, BUG(), warning, ...).
+
+How to change aspects of a tracked regression?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+By using a 'regzbot command' in a direct or indirect reply to the mail with the
+report. The easiest way to do that: find the report in your "Sent" folder or the
+mailing list archive and reply to it using your mailer's "Reply-all" function.
+In that mail, use one of the following commands in a stand-alone paragraph (IOW:
+use blank lines to separate one or multiple of these commands from the rest of
+the mail's text).
+
+ * Update when the regression started to happen, for example after performing a
+   bisection::
+
+       #regzbot introduced: 1f2e3d4c5d
+
+ * Set or update the title::
+
+       #regzbot title: foo
+
+ * Monitor a discussion or bugzilla.kernel.org ticket where additions aspects of
+   the issue or a fix are discussed:::
+
+       #regzbot monitor: https://lore.kernel.org/r/30th.anniversary.repost@klaava.Helsinki.FI/
+       #regzbot monitor: https://bugzilla.kernel.org/show_bug.cgi?id=123456789
+
+ * Point to a place with further details of interest, like a mailing list post
+   or a ticket in a bug tracker that are slightly related, but about a different
+   topic::
+
+       #regzbot link: https://bugzilla.kernel.org/show_bug.cgi?id=123456789
+
+ * Mark a regression as invalid::
+
+       #regzbot invalid: wasn't a regression, problem has always existed
+
+Regzbot supports a few other commands primarily used by developers or people
+tracking regressions. They and more details about the aforementioned regzbot
+commands can be found in the `getting started guide
+<https://gitlab.com/knurd42/regzbot/-/blob/main/docs/getting_started.md>`_ and
+the `reference documentation <https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md>`_
+for regzbot.
+
+..
+   end-of-content
+..
+   This text is available under GPL-2.0+ or CC-BY-4.0, as stated at the top
+   of the file. If you want to distribute this text under CC-BY-4.0 only,
+   please use "The Linux kernel developers" for author attribution and link
+   this as source:
+   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/plain/Documentation/admin-guide/reporting-regressions.rst
+..
+   Note: Only the content of this RST file as found in the Linux kernel sources
+   is available under CC-BY-4.0, as versions of this text that were processed
+   (for example by the kernel's build system) might contain content taken from
+   files which use a more restrictive license.
diff --git a/Documentation/admin-guide/serial-console.rst b/Documentation/admin-guide/serial-console.rst
index 58b32832e50a..8c8b94e54e26 100644
--- a/Documentation/admin-guide/serial-console.rst
+++ b/Documentation/admin-guide/serial-console.rst
@@ -33,8 +33,11 @@ The format of this option is::
 			9600n8. The maximum baudrate is 115200.
 
 You can specify multiple console= options on the kernel command line.
-Output will appear on all of them. The last device will be used when
-you open ``/dev/console``. So, for example::
+
+The behavior is well defined when each device type is mentioned only once.
+In this case, the output will appear on all requested consoles. And
+the last device will be used when you open ``/dev/console``.
+So, for example::
 
 	console=ttyS1,9600 console=tty0
 
@@ -42,7 +45,34 @@ defines that opening ``/dev/console`` will get you the current foreground
 virtual console, and kernel messages will appear on both the VGA
 console and the 2nd serial port (ttyS1 or COM2) at 9600 baud.
 
-Note that you can only define one console per device type (serial, video).
+The behavior is more complicated when the same device type is defined more
+times. In this case, there are the following two rules:
+
+1. The output will appear only on the first device of each defined type.
+
+2. ``/dev/console`` will be associated with the first registered device.
+   Where the registration order depends on how kernel initializes various
+   subsystems.
+
+   This rule is used also when the last console= parameter is not used
+   for other reasons. For example, because of a typo or because
+   the hardware is not available.
+
+The result might be surprising. For example, the following two command
+lines have the same result:
+
+	console=ttyS1,9600 console=tty0 console=tty1
+	console=tty0 console=ttyS1,9600 console=tty1
+
+The kernel messages are printed only on ``tty0`` and ``ttyS1``. And
+``/dev/console`` gets associated with ``tty0``. It is because kernel
+tries to register graphical consoles before serial ones. It does it
+because of the default behavior when no console device is specified,
+see below.
+
+Note that the last ``console=tty1`` parameter still makes a difference.
+The kernel command line is used also by systemd. It would use the last
+defined ``tty1`` as the login console.
 
 If no console device is specified, the first device found capable of
 acting as a system console will be used. At this time, the system
diff --git a/Documentation/admin-guide/spkguide.txt b/Documentation/admin-guide/spkguide.txt
index 977ab3f5a0a8..74ea7f391942 100644
--- a/Documentation/admin-guide/spkguide.txt
+++ b/Documentation/admin-guide/spkguide.txt
@@ -543,7 +543,7 @@ As mentioned earlier, Speakup can either be completely compiled into the
 kernel, with the exception of the help module, or it can be compiled as
 a series of modules.   When compiled as modules, Speakup will only be
 able to speak some of the bootup messages if your system administrator
-has configured the system to load the modules at boo time. The modules
+has configured the system to load the modules at boot time. The modules
 can  be loaded after the file systems have been checked and mounted, or
 from an initrd.  There is a third possibility.  Speakup can be compiled
 with some components built into the kernel, and others as modules.  As
@@ -1105,8 +1105,8 @@ speakup load
 Alternatively, you can add the above line to your file
 ~/.bashrc or ~/.bash_profile.
 
-If your system administrator ran himself the script, all the users will be able
-to change from English to the language choosed by root and do directly
+If your system administrator himself ran the script, all the users will be able
+to change from English to the language chosen by root and do directly
 speakupconf load (or add this to the ~/.bashrc or
 ~/.bash_profile file). If there are several languages to handle, the
 administrator (or every user) will have to run the first steps until speakupconf
diff --git a/Documentation/admin-guide/syscall-user-dispatch.rst b/Documentation/admin-guide/syscall-user-dispatch.rst
index 60314953c728..e3cfffef5a63 100644
--- a/Documentation/admin-guide/syscall-user-dispatch.rst
+++ b/Documentation/admin-guide/syscall-user-dispatch.rst
@@ -73,6 +73,10 @@ thread-wide, without the need to invoke the kernel directly.  selector
 can be set to SYSCALL_DISPATCH_FILTER_ALLOW or SYSCALL_DISPATCH_FILTER_BLOCK.
 Any other value should terminate the program with a SIGSYS.
 
+Additionally, a tasks syscall user dispatch configuration can be peeked
+and poked via the PTRACE_(GET|SET)_SYSCALL_USER_DISPATCH_CONFIG ptrace
+requests. This is useful for checkpoint/restart software.
+
 Security Notes
 --------------
 
diff --git a/Documentation/admin-guide/sysctl/fs.rst b/Documentation/admin-guide/sysctl/fs.rst
index 2a501c9ddc55..a321b84eccaa 100644
--- a/Documentation/admin-guide/sysctl/fs.rst
+++ b/Documentation/admin-guide/sysctl/fs.rst
@@ -2,8 +2,6 @@
 Documentation for /proc/sys/fs/
 ===============================
 
-kernel version 2.2.10
-
 Copyright (c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
 
 Copyright (c) 2009,        Shen Feng<shen@cn.fujitsu.com>
@@ -12,58 +10,40 @@ For general info and legal blurb, please look in intro.rst.
 
 ------------------------------------------------------------------------------
 
-This file contains documentation for the sysctl files in
-/proc/sys/fs/ and is valid for Linux kernel version 2.2.
+This file contains documentation for the sysctl files and directories
+in ``/proc/sys/fs/``.
 
 The files in this directory can be used to tune and monitor
 miscellaneous and general things in the operation of the Linux
-kernel. Since some of the files _can_ be used to screw up your
+kernel. Since some of the files *can* be used to screw up your
 system, it is advisable to read both documentation and source
 before actually making adjustments.
 
 1. /proc/sys/fs
 ===============
 
-Currently, these files are in /proc/sys/fs:
-
-- aio-max-nr
-- aio-nr
-- dentry-state
-- dquot-max
-- dquot-nr
-- file-max
-- file-nr
-- inode-max
-- inode-nr
-- inode-state
-- nr_open
-- overflowuid
-- overflowgid
-- pipe-user-pages-hard
-- pipe-user-pages-soft
-- protected_fifos
-- protected_hardlinks
-- protected_regular
-- protected_symlinks
-- suid_dumpable
-- super-max
-- super-nr
+Currently, these files might (depending on your configuration)
+show up in ``/proc/sys/fs``:
+
+.. contents:: :local:
 
 
 aio-nr & aio-max-nr
 -------------------
 
-aio-nr is the running total of the number of events specified on the
-io_setup system call for all currently active aio contexts.  If aio-nr
-reaches aio-max-nr then io_setup will fail with EAGAIN.  Note that
-raising aio-max-nr does not result in the pre-allocation or re-sizing
-of any kernel data structures.
+``aio-nr`` shows the current system-wide number of asynchronous io
+requests.  ``aio-max-nr`` allows you to change the maximum value
+``aio-nr`` can grow to.  If ``aio-nr`` reaches ``aio-nr-max`` then
+``io_setup`` will fail with ``EAGAIN``.  Note that raising
+``aio-max-nr`` does not result in the
+pre-allocation or re-sizing of any kernel data structures.
 
 
 dentry-state
 ------------
 
-From linux/include/linux/dcache.h::
+This file shows the values in ``struct dentry_stat``, as defined in
+``linux/include/linux/dcache.h``::
 
   struct dentry_stat_t dentry_stat {
         int nr_dentry;
@@ -76,95 +56,84 @@ From linux/include/linux/dcache.h::
 
 Dentries are dynamically allocated and deallocated.
 
-nr_dentry shows the total number of dentries allocated (active
-+ unused). nr_unused shows the number of dentries that are not
+``nr_dentry`` shows the total number of dentries allocated (active
++ unused). ``nr_unused shows`` the number of dentries that are not
 actively used, but are saved in the LRU list for future reuse.
 
-Age_limit is the age in seconds after which dcache entries
-can be reclaimed when memory is short and want_pages is
-nonzero when shrink_dcache_pages() has been called and the
+``age_limit`` is the age in seconds after which dcache entries
+can be reclaimed when memory is short and ``want_pages`` is
+nonzero when ``shrink_dcache_pages()`` has been called and the
 dcache isn't pruned yet.
 
-nr_negative shows the number of unused dentries that are also
+``nr_negative`` shows the number of unused dentries that are also
 negative dentries which do not map to any files. Instead,
 they help speeding up rejection of non-existing files provided
 by the users.
 
 
-dquot-max & dquot-nr
---------------------
-
-The file dquot-max shows the maximum number of cached disk
-quota entries.
-
-The file dquot-nr shows the number of allocated disk quota
-entries and the number of free disk quota entries.
-
-If the number of free cached disk quotas is very low and
-you have some awesome number of simultaneous system users,
-you might want to raise the limit.
-
-
 file-max & file-nr
 ------------------
 
-The value in file-max denotes the maximum number of file-
+The value in ``file-max`` denotes the maximum number of file-
 handles that the Linux kernel will allocate. When you get lots
 of error messages about running out of file handles, you might
 want to increase this limit.
 
 Historically,the kernel was able to allocate file handles
 dynamically, but not to free them again. The three values in
-file-nr denote the number of allocated file handles, the number
+``file-nr`` denote the number of allocated file handles, the number
 of allocated but unused file handles, and the maximum number of
-file handles. Linux 2.6 always reports 0 as the number of free
+file handles. Linux 2.6 and later always reports 0 as the number of free
 file handles -- this is not an error, it just means that the
 number of allocated file handles exactly matches the number of
 used file handles.
 
-Attempts to allocate more file descriptors than file-max are
-reported with printk, look for "VFS: file-max limit <number>
-reached".
+Attempts to allocate more file descriptors than ``file-max`` are
+reported with ``printk``, look for::
 
+  VFS: file-max limit <number> reached
 
-nr_open
--------
-
-This denotes the maximum number of file-handles a process can
-allocate. Default value is 1024*1024 (1048576) which should be
-enough for most machines. Actual limit depends on RLIMIT_NOFILE
-resource limit.
+in the kernel logs.
 
 
-inode-max, inode-nr & inode-state
----------------------------------
+inode-nr & inode-state
+----------------------
 
 As with file handles, the kernel allocates the inode structures
 dynamically, but can't free them yet.
 
-The value in inode-max denotes the maximum number of inode
-handlers. This value should be 3-4 times larger than the value
-in file-max, since stdin, stdout and network sockets also
-need an inode struct to handle them. When you regularly run
-out of inodes, you need to increase this value.
-
-The file inode-nr contains the first two items from
-inode-state, so we'll skip to that file...
+The file ``inode-nr`` contains the first two items from
+``inode-state``, so we'll skip to that file...
 
-Inode-state contains three actual numbers and four dummies.
-The actual numbers are, in order of appearance, nr_inodes,
-nr_free_inodes and preshrink.
+``inode-state`` contains three actual numbers and four dummies.
+The actual numbers are, in order of appearance, ``nr_inodes``,
+``nr_free_inodes`` and ``preshrink``.
 
-Nr_inodes stands for the number of inodes the system has
-allocated, this can be slightly more than inode-max because
-Linux allocates them one pageful at a time.
+``nr_inodes`` stands for the number of inodes the system has
+allocated.
 
-Nr_free_inodes represents the number of free inodes (?) and
-preshrink is nonzero when the nr_inodes > inode-max and the
+``nr_free_inodes`` represents the number of free inodes (?) and
+preshrink is nonzero when the
 system needs to prune the inode list instead of allocating
 more.
 
 
+mount-max
+---------
+
+This denotes the maximum number of mounts that may exist
+in a mount namespace.
+
+
+nr_open
+-------
+
+This denotes the maximum number of file-handles a process can
+allocate. Default value is 1024*1024 (1048576) which should be
+enough for most machines. Actual limit depends on ``RLIMIT_NOFILE``
+resource limit.
+
+
 overflowgid & overflowuid
 -------------------------
 
@@ -192,7 +161,7 @@ pipe-user-pages-soft
 Maximum total number of pages a non-privileged user may allocate for pipes
 before the pipe size gets limited to a single page. Once this limit is reached,
 new pipes will be limited to a single page in size for this user in order to
-limit total memory usage, and trying to increase them using fcntl() will be
+limit total memory usage, and trying to increase them using ``fcntl()`` will be
 denied until usage goes below the limit again. The default value allows to
 allocate up to 1024 pipes at their default size. When set to 0, no limit is
 applied.
@@ -207,7 +176,7 @@ file.
 
 When set to "0", writing to FIFOs is unrestricted.
 
-When set to "1" don't allow O_CREAT open on FIFOs that we don't own
+When set to "1" don't allow ``O_CREAT`` open on FIFOs that we don't own
 in world writable sticky directories, unless they are owned by the
 owner of the directory.
 
@@ -221,7 +190,7 @@ protected_hardlinks
 
 A long-standing class of security issues is the hardlink-based
 time-of-check-time-of-use race, most commonly seen in world-writable
-directories like /tmp. The common method of exploitation of this flaw
+directories like ``/tmp``. The common method of exploitation of this flaw
 is to cross privilege boundaries when following a given hardlink (i.e. a
 root process follows a hardlink created by another user). Additionally,
 on systems without separated partitions, this stops unauthorized users
@@ -239,13 +208,13 @@ This protection is based on the restrictions in Openwall and grsecurity.
 protected_regular
 -----------------
 
-This protection is similar to protected_fifos, but it
+This protection is similar to `protected_fifos`_, but it
 avoids writes to an attacker-controlled regular file, where a program
 expected to create one.
 
 When set to "0", writing to regular files is unrestricted.
 
-When set to "1" don't allow O_CREAT open on regular files that we
+When set to "1" don't allow ``O_CREAT`` open on regular files that we
 don't own in world writable sticky directories, unless they are
 owned by the owner of the directory.
 
@@ -257,7 +226,7 @@ protected_symlinks
 
 A long-standing class of security issues is the symlink-based
 time-of-check-time-of-use race, most commonly seen in world-writable
-directories like /tmp. The common method of exploitation of this flaw
+directories like ``/tmp``. The common method of exploitation of this flaw
 is to cross privilege boundaries when following a given symlink (i.e. a
 root process follows a symlink belonging to another user). For a likely
 incomplete list of hundreds of examples across the years, please see:
@@ -272,23 +241,25 @@ follower match, or when the directory owner matches the symlink's owner.
 This protection is based on the restrictions in Openwall and grsecurity.
 
 
-suid_dumpable:
---------------
+suid_dumpable
+-------------
 
 This value can be used to query and set the core dump mode for setuid
 or otherwise protected/tainted binaries. The modes are
 
 =   ==========  ===============================================================
-0   (default)	traditional behaviour. Any process which has changed
+0   (default)	Traditional behaviour. Any process which has changed
 		privilege levels or is execute only will not be dumped.
-1   (debug)	all processes dump core when possible. The core dump is
+1   (debug)	All processes dump core when possible. The core dump is
 		owned by the current user and no security is applied. This is
 		intended for system debugging situations only.
 		Ptrace is unchecked.
 		This is insecure as it allows regular users to examine the
 		memory contents of privileged processes.
-2   (suidsafe)	any binary which normally would not be dumped is dumped
-		anyway, but only if the "core_pattern" kernel sysctl is set to
+2   (suidsafe)	Any binary which normally would not be dumped is dumped
+		anyway, but only if the ``core_pattern`` kernel sysctl (see
+		:ref:`Documentation/admin-guide/sysctl/kernel.rst <core_pattern>`)
+		is set to
 		either a pipe handler or a fully qualified path. (For more
 		details on this limitation, see CVE-2006-2451.) This mode is
 		appropriate when administrators are attempting to debug
@@ -301,36 +272,11 @@ or otherwise protected/tainted binaries. The modes are
 =   ==========  ===============================================================
 
 
-super-max & super-nr
---------------------
-
-These numbers control the maximum number of superblocks, and
-thus the maximum number of mounted filesystems the kernel
-can have. You only need to increase super-max if you need to
-mount more filesystems than the current value in super-max
-allows you to.
-
-
-aio-nr & aio-max-nr
--------------------
-
-aio-nr shows the current system-wide number of asynchronous io
-requests.  aio-max-nr allows you to change the maximum value
-aio-nr can grow to.
-
-
-mount-max
----------
-
-This denotes the maximum number of mounts that may exist
-in a mount namespace.
-
-
 
 2. /proc/sys/fs/binfmt_misc
 ===========================
 
-Documentation for the files in /proc/sys/fs/binfmt_misc is
+Documentation for the files in ``/proc/sys/fs/binfmt_misc`` is
 in Documentation/admin-guide/binfmt-misc.rst.
 
 
@@ -343,28 +289,32 @@ creation of a  user space  library that  implements  the  POSIX message queues
 API (as noted by the  MSG tag in the  POSIX 1003.1-2001 version  of the System
 Interfaces specification.)
 
-The "mqueue" filesystem contains values for determining/setting  the amount of
-resources used by the file system.
+The "mqueue" filesystem contains values for determining/setting the
+amount of resources used by the file system.
 
-/proc/sys/fs/mqueue/queues_max is a read/write  file for  setting/getting  the
-maximum number of message queues allowed on the system.
+``/proc/sys/fs/mqueue/queues_max`` is a read/write file for
+setting/getting the maximum number of message queues allowed on the
+system.
 
-/proc/sys/fs/mqueue/msg_max  is  a  read/write file  for  setting/getting  the
-maximum number of messages in a queue value.  In fact it is the limiting value
-for another (user) limit which is set in mq_open invocation. This attribute of
-a queue must be less or equal then msg_max.
+``/proc/sys/fs/mqueue/msg_max`` is a read/write file for
+setting/getting the maximum number of messages in a queue value.  In
+fact it is the limiting value for another (user) limit which is set in
+``mq_open`` invocation.  This attribute of a queue must be less than
+or equal to ``msg_max``.
 
-/proc/sys/fs/mqueue/msgsize_max is  a read/write  file for setting/getting the
-maximum  message size value (it is every  message queue's attribute set during
-its creation).
+``/proc/sys/fs/mqueue/msgsize_max`` is a read/write file for
+setting/getting the maximum message size value (it is an attribute of
+every message queue, set during its creation).
 
-/proc/sys/fs/mqueue/msg_default is  a read/write  file for setting/getting the
-default number of messages in a queue value if attr parameter of mq_open(2) is
-NULL. If it exceed msg_max, the default value is initialized msg_max.
+``/proc/sys/fs/mqueue/msg_default`` is a read/write file for
+setting/getting the default number of messages in a queue value if the
+``attr`` parameter of ``mq_open(2)`` is ``NULL``. If it exceeds
+``msg_max``, the default value is initialized to ``msg_max``.
 
-/proc/sys/fs/mqueue/msgsize_default is a read/write file for setting/getting
-the default message size value if attr parameter of mq_open(2) is NULL. If it
-exceed msgsize_max, the default value is initialized msgsize_max.
+``/proc/sys/fs/mqueue/msgsize_default`` is a read/write file for
+setting/getting the default message size value if the ``attr``
+parameter of ``mq_open(2)`` is ``NULL``. If it exceeds
+``msgsize_max``, the default value is initialized to ``msgsize_max``.
 
 4. /proc/sys/fs/epoll - Configuration options for the epoll interface
 =====================================================================
@@ -378,7 +328,7 @@ Every epoll file descriptor can store a number of files to be monitored
 for event readiness. Each one of these monitored files constitutes a "watch".
 This configuration option sets the maximum number of "watches" that are
 allowed for each user.
-Each "watch" costs roughly 90 bytes on a 32bit kernel, and roughly 160 bytes
-on a 64bit one.
-The current default value for  max_user_watches  is the 1/25 (4%) of the
-available low memory, divided for the "watch" cost in bytes.
+Each "watch" costs roughly 90 bytes on a 32-bit kernel, and roughly 160 bytes
+on a 64-bit one.
+The current default value for ``max_user_watches`` is 4% of the
+available low memory, divided by the "watch" cost in bytes.
diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst
index 426162009ce9..d85d90f5d000 100644
--- a/Documentation/admin-guide/sysctl/kernel.rst
+++ b/Documentation/admin-guide/sysctl/kernel.rst
@@ -38,8 +38,8 @@ acct
 
 If BSD-style process accounting is enabled these values control
 its behaviour. If free space on filesystem where the log lives
-goes below ``lowwater``% accounting suspends. If free space gets
-above ``highwater``% accounting resumes. ``frequency`` determines
+goes below ``lowwater``\ % accounting suspends. If free space gets
+above ``highwater``\ % accounting resumes. ``frequency`` determines
 how often do we check the amount of free space (value is in
 seconds). Default:
 
@@ -65,6 +65,11 @@ combining the following values:
 4 s3_beep
 = =======
 
+arch
+====
+
+The machine hardware name, the same output as ``uname -m``
+(e.g. ``x86_64`` or ``aarch64``).
 
 auto_msgmni
 ===========
@@ -90,7 +95,7 @@ is 0x15 and the full version number is 0x234, this file will contain
 the value 340 = 0x154.
 
 See the ``type_of_loader`` and ``ext_loader_type`` fields in
-Documentation/x86/boot.rst for additional information.
+Documentation/arch/x86/boot.rst for additional information.
 
 
 bootloader_version (x86 only)
@@ -100,7 +105,7 @@ The complete bootloader version number.  In the example above, this
 file will contain the value 564 = 0x234.
 
 See the ``type_of_loader`` and ``ext_loader_ver`` fields in
-Documentation/x86/boot.rst for additional information.
+Documentation/arch/x86/boot.rst for additional information.
 
 
 bpf_stats_enabled
@@ -134,6 +139,8 @@ Highest valid capability of the running kernel.  Exports
 ``CAP_LAST_CAP`` from the kernel.
 
 
+.. _core_pattern:
+
 core_pattern
 ============
 
@@ -169,6 +176,7 @@ core_pattern
 	%f      	executable filename
 	%E		executable path
 	%c		maximum size of core file by resource limit RLIMIT_CORE
+	%C		CPU the task ran on
 	%<OTHER>	both are dropped
 	========	==========================================
 
@@ -428,8 +436,8 @@ ignore-unaligned-usertrap
 
 On architectures where unaligned accesses cause traps, and where this
 feature is supported (``CONFIG_SYSCTL_ARCH_UNALIGN_NO_WARN``;
-currently, ``arc`` and ``ia64``), controls whether all unaligned traps
-are logged.
+currently, ``arc``, ``ia64`` and ``loongarch``), controls whether all
+unaligned traps are logged.
 
 = =============================================================
 0 Log all unaligned accesses.
@@ -445,9 +453,10 @@ this allows system administrators to override the
 kexec_load_disabled
 ===================
 
-A toggle indicating if the ``kexec_load`` syscall has been disabled.
-This value defaults to 0 (false: ``kexec_load`` enabled), but can be
-set to 1 (true: ``kexec_load`` disabled).
+A toggle indicating if the syscalls ``kexec_load`` and
+``kexec_file_load`` have been disabled.
+This value defaults to 0 (false: ``kexec_*load`` enabled), but can be
+set to 1 (true: ``kexec_*load`` disabled).
 Once true, kexec can no longer be used, and the toggle cannot be set
 back to false.
 This allows a kexec image to be loaded before disabling the syscall,
@@ -455,6 +464,24 @@ allowing a system to set up (and later use) an image without it being
 altered.
 Generally used together with the `modules_disabled`_ sysctl.
 
+kexec_load_limit_panic
+======================
+
+This parameter specifies a limit to the number of times the syscalls
+``kexec_load`` and ``kexec_file_load`` can be called with a crash
+image. It can only be set with a more restrictive value than the
+current one.
+
+== ======================================================
+-1 Unlimited calls to kexec. This is the default setting.
+N  Number of calls left.
+== ======================================================
+
+kexec_load_limit_reboot
+=======================
+
+Similar functionality as ``kexec_load_limit_panic``, but for a normal
+image.
 
 kptr_restrict
 =============
@@ -592,68 +619,59 @@ to the guest kernel command line (see
 Documentation/admin-guide/kernel-parameters.rst).
 
 
-numa_balancing
-==============
+nmi_wd_lpm_factor (PPC only)
+============================
 
-Enables/disables automatic page fault based NUMA memory
-balancing. Memory is moved automatically to nodes
-that access it often.
+Factor to apply to the NMI watchdog timeout (only when ``nmi_watchdog`` is
+set to 1). This factor represents the percentage added to
+``watchdog_thresh`` when calculating the NMI watchdog timeout during an
+LPM. The soft lockup timeout is not impacted.
 
-Enables/disables automatic NUMA memory balancing. On NUMA machines, there
-is a performance penalty if remote memory is accessed by a CPU. When this
-feature is enabled the kernel samples what task thread is accessing memory
-by periodically unmapping pages and later trapping a page fault. At the
-time of the page fault, it is determined if the data being accessed should
-be migrated to a local memory node.
+A value of 0 means no change. The default value is 200 meaning the NMI
+watchdog is set to 30s (based on ``watchdog_thresh`` equal to 10).
 
-The unmapping of pages and trapping faults incur additional overhead that
-ideally is offset by improved memory locality but there is no universal
-guarantee. If the target workload is already bound to NUMA nodes then this
-feature should be disabled. Otherwise, if the system overhead from the
-feature is too high then the rate the kernel samples for NUMA hinting
-faults may be controlled by the `numa_balancing_scan_period_min_ms,
-numa_balancing_scan_delay_ms, numa_balancing_scan_period_max_ms,
-numa_balancing_scan_size_mb`_, and numa_balancing_settle_count sysctls.
-
-
-numa_balancing_scan_period_min_ms, numa_balancing_scan_delay_ms, numa_balancing_scan_period_max_ms, numa_balancing_scan_size_mb
-===============================================================================================================================
 
+numa_balancing
+==============
 
-Automatic NUMA balancing scans tasks address space and unmaps pages to
-detect if pages are properly placed or if the data should be migrated to a
-memory node local to where the task is running.  Every "scan delay" the task
-scans the next "scan size" number of pages in its address space. When the
-end of the address space is reached the scanner restarts from the beginning.
+Enables/disables and configures automatic page fault based NUMA memory
+balancing.  Memory is moved automatically to nodes that access it often.
+The value to set can be the result of ORing the following:
 
-In combination, the "scan delay" and "scan size" determine the scan rate.
-When "scan delay" decreases, the scan rate increases.  The scan delay and
-hence the scan rate of every task is adaptive and depends on historical
-behaviour. If pages are properly placed then the scan delay increases,
-otherwise the scan delay decreases.  The "scan size" is not adaptive but
-the higher the "scan size", the higher the scan rate.
+= =================================
+0 NUMA_BALANCING_DISABLED
+1 NUMA_BALANCING_NORMAL
+2 NUMA_BALANCING_MEMORY_TIERING
+= =================================
 
-Higher scan rates incur higher system overhead as page faults must be
-trapped and potentially data must be migrated. However, the higher the scan
-rate, the more quickly a tasks memory is migrated to a local node if the
-workload pattern changes and minimises performance impact due to remote
-memory accesses. These sysctls control the thresholds for scan delays and
-the number of pages scanned.
+Or NUMA_BALANCING_NORMAL to optimize page placement among different
+NUMA nodes to reduce remote accessing.  On NUMA machines, there is a
+performance penalty if remote memory is accessed by a CPU. When this
+feature is enabled the kernel samples what task thread is accessing
+memory by periodically unmapping pages and later trapping a page
+fault. At the time of the page fault, it is determined if the data
+being accessed should be migrated to a local memory node.
 
-``numa_balancing_scan_period_min_ms`` is the minimum time in milliseconds to
-scan a tasks virtual memory. It effectively controls the maximum scanning
-rate for each task.
+The unmapping of pages and trapping faults incur additional overhead that
+ideally is offset by improved memory locality but there is no universal
+guarantee. If the target workload is already bound to NUMA nodes then this
+feature should be disabled.
 
-``numa_balancing_scan_delay_ms`` is the starting "scan delay" used for a task
-when it initially forks.
+Or NUMA_BALANCING_MEMORY_TIERING to optimize page placement among
+different types of memory (represented as different NUMA nodes) to
+place the hot pages in the fast memory.  This is implemented based on
+unmapping and page fault too.
 
-``numa_balancing_scan_period_max_ms`` is the maximum time in milliseconds to
-scan a tasks virtual memory. It effectively controls the minimum scanning
-rate for each task.
+numa_balancing_promote_rate_limit_MBps
+======================================
 
-``numa_balancing_scan_size_mb`` is how many megabytes worth of pages are
-scanned for a given scan.
+Too high promotion/demotion throughput between different memory types
+may hurt application latency.  This can be used to rate limit the
+promotion throughput.  The per-node max promotion throughput in MB/s
+will be limited to be no more than the set value.
 
+A rule of thumb is to set this to less than 1/10 of the PMEM node
+write bandwidth.
 
 oops_all_cpu_backtrace
 ======================
@@ -671,6 +689,15 @@ This is the default behavior.
 an oops event is detected.
 
 
+oops_limit
+==========
+
+Number of kernel oopses after which the kernel should panic when
+``panic_on_oops`` is not set. Setting this to 0 disables checking
+the count. Setting this to  1 has the same effect as setting
+``panic_on_oops=1``. The default value is 10000.
+
+
 osrelease, ostype & version
 ===========================
 
@@ -795,6 +822,8 @@ bit 1  print system memory info
 bit 2  print timer info
 bit 3  print locks info if ``CONFIG_LOCKDEP`` is on
 bit 4  print ftrace buffer
+bit 5  print all printk messages in buffer
+bit 6  print all CPUs backtrace (if available in the arch)
 =====  ============================================
 
 So for example to print tasks and memory info on panic, user can::
@@ -813,6 +842,13 @@ is useful to define the root cause of RCU stalls using a vmcore.
 1 panic() after printing RCU stall messages.
 = ============================================================
 
+max_rcu_stall_to_panic
+======================
+
+When ``panic_on_rcu_stall`` is set to 1, this value determines the
+number of times that RCU can stall before panic() is called.
+
+When ``panic_on_rcu_stall`` is set to 0, this value is has no effect.
 
 perf_cpu_time_max_percent
 =========================
@@ -905,6 +941,17 @@ enabled, otherwise writing to this file will return ``-EBUSY``.
 The default value is 8.
 
 
+perf_user_access (arm64 only)
+=================================
+
+Controls user space access for reading perf event counters. When set to 1,
+user space can read performance monitor counter registers directly.
+
+The default value is 0 (access disabled).
+
+See Documentation/arm64/perf.rst for more information.
+
+
 pid_max
 =======
 
@@ -1013,28 +1060,22 @@ This is a directory, with the following entries:
 * ``boot_id``: a UUID generated the first time this is retrieved, and
   unvarying after that;
 
+* ``uuid``: a UUID generated every time this is retrieved (this can
+  thus be used to generate UUIDs at will);
+
 * ``entropy_avail``: the pool's entropy count, in bits;
 
 * ``poolsize``: the entropy pool size, in bits;
 
 * ``urandom_min_reseed_secs``: obsolete (used to determine the minimum
-  number of seconds between urandom pool reseeding).
-
-* ``uuid``: a UUID generated every time this is retrieved (this can
-  thus be used to generate UUIDs at will);
+  number of seconds between urandom pool reseeding). This file is
+  writable for compatibility purposes, but writing to it has no effect
+  on any RNG behavior;
 
 * ``write_wakeup_threshold``: when the entropy count drops below this
   (as a number of bits), processes waiting to write to ``/dev/random``
-  are woken up.
-
-If ``drivers/char/random.c`` is built with ``ADD_INTERRUPT_BENCH``
-defined, these additional entries are present:
-
-* ``add_interrupt_avg_cycles``: the average number of cycles between
-  interrupts used to feed the pool;
-
-* ``add_interrupt_avg_deviation``: the standard deviation seen on the
-  number of cycles between interrupts used to feed the pool.
+  are woken up. This file is writable for compatibility purposes, but
+  writing to it has no effect on any RNG behavior.
 
 
 randomize_va_space
@@ -1099,7 +1140,7 @@ task_delayacct
 ===============
 
 Enables/disables task delay accounting (see
-:doc:`accounting/delay-accounting.rst`). Enabling this feature incurs
+Documentation/accounting/delay-accounting.rst. Enabling this feature incurs
 a small amount of overhead in the scheduler but is useful for debugging
 and performance tuning. It is required by some tools such as iotop.
 
@@ -1304,6 +1345,29 @@ watchdog work to be queued by the watchdog timer function, otherwise the NMI
 watchdog — if enabled — can detect a hard lockup condition.
 
 
+split_lock_mitigate (x86 only)
+==============================
+
+On x86, each "split lock" imposes a system-wide performance penalty. On larger
+systems, large numbers of split locks from unprivileged users can result in
+denials of service to well-behaved and potentially more important users.
+
+The kernel mitigates these bad users by detecting split locks and imposing
+penalties: forcing them to wait and only allowing one core to execute split
+locks at a time.
+
+These mitigations can make those bad applications unbearably slow. Setting
+split_lock_mitigate=0 may restore some application performance, but will also
+increase system exposure to denial of service attacks from split lock users.
+
+= ===================================================================
+0 Disable the mitigation mode - just warns the split lock on kernel log
+  and exposes the system to denials of service from the split lockers.
+1 Enable the mitigation mode (this is the default) - penalizes the split
+  lockers with intentional performance degradation.
+= ===================================================================
+
+
 stack_erasing
 =============
 
@@ -1447,8 +1511,8 @@ unaligned-trap
 
 On architectures where unaligned accesses cause traps, and where this
 feature is supported (``CONFIG_SYSCTL_ARCH_UNALIGN_ALLOW``; currently,
-``arc`` and ``parisc``), controls whether unaligned traps are caught
-and emulated (instead of failing).
+``arc``, ``parisc`` and ``loongarch``), controls whether unaligned traps
+are caught and emulated (instead of failing).
 
 = ========================================================
 0 Do not emulate unaligned accesses.
@@ -1490,6 +1554,16 @@ entry will default to 2 instead of 0.
 2 Unprivileged calls to ``bpf()`` are disabled
 = =============================================================
 
+
+warn_limit
+==========
+
+Number of kernel warnings after which the kernel should panic when
+``panic_on_warn`` is not set. Setting this to 0 disables checking
+the warning count. Setting this to 1 has the same effect as setting
+``panic_on_warn=1``. The default value is 0.
+
+
 watchdog
 ========
 
diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst
index 4150f74c521a..466c560b0c30 100644
--- a/Documentation/admin-guide/sysctl/net.rst
+++ b/Documentation/admin-guide/sysctl/net.rst
@@ -31,17 +31,18 @@ see only some of them, depending on your kernel's configuration.
 
 Table : Subdirectories in /proc/sys/net
 
- ========= =================== = ========== ==================
+ ========= =================== = ========== ===================
  Directory Content               Directory  Content
- ========= =================== = ========== ==================
- core      General parameter     appletalk  Appletalk protocol
- unix      Unix domain sockets   netrom     NET/ROM
- 802       E802 protocol         ax25       AX25
- ethernet  Ethernet protocol     rose       X.25 PLP layer
+ ========= =================== = ========== ===================
+ 802       E802 protocol         mptcp      Multipath TCP
+ appletalk Appletalk protocol    netfilter  Network Filter
+ ax25      AX25                  netrom     NET/ROM
+ bridge    Bridging              rose       X.25 PLP layer
+ core      General parameter     tipc       TIPC
+ ethernet  Ethernet protocol     unix       Unix domain sockets
  ipv4      IP version 4          x25        X.25 protocol
- bridge    Bridging              decnet     DEC net
- ipv6      IP version 6          tipc       TIPC
- ========= =================== = ========== ==================
+ ipv6      IP version 6
+ ========= =================== = ========== ===================
 
 1. /proc/sys/net/core - Network core options
 ============================================
@@ -101,6 +102,9 @@ Values:
 	- 1 - enable JIT hardening for unprivileged users only
 	- 2 - enable JIT hardening for all users
 
+where "privileged user" in this context means a process having
+CAP_BPF or CAP_SYS_ADMIN in the root user name space.
+
 bpf_jit_kallsyms
 ----------------
 
@@ -211,6 +215,12 @@ rmem_max
 
 The maximum receive socket buffer size in bytes.
 
+rps_default_mask
+----------------
+
+The default RPS CPU mask used on newly created network devices. An empty
+mask means RPS disabled by default.
+
 tstamp_allow_data
 -----------------
 Allow processes to receive tx timestamps looped together with the original
@@ -271,7 +281,7 @@ poll cycle or the number of packets processed reaches netdev_budget.
 netdev_max_backlog
 ------------------
 
-Maximum number  of  packets,  queued  on  the  INPUT  side, when the interface
+Maximum number of packets, queued on the INPUT side, when the interface
 receives packets faster than kernel can process them.
 
 netdev_rss_key
@@ -322,6 +332,14 @@ a leaked reference faster. A larger value may be useful to prevent false
 warnings on slow/loaded systems.
 Default value is 10, minimum 1, maximum 3600.
 
+skb_defer_max
+-------------
+
+Max size (in skbs) of the per-cpu list of skbs being freed
+by the cpu which allocated them. Used by TCP stack so far.
+
+Default: 64
+
 optmem_max
 ----------
 
@@ -365,6 +383,36 @@ new netns has been created.
 
 Default : 0  (for compatibility reasons)
 
+txrehash
+--------
+
+Controls default hash rethink behaviour on listening socket when SO_TXREHASH
+option is set to SOCK_TXREHASH_DEFAULT (i. e. not overridden by setsockopt).
+
+If set to 1 (default), hash rethink is performed on listening socket.
+If set to 0, hash rethink is not performed.
+
+gro_normal_batch
+----------------
+
+Maximum number of the segments to batch up on output of GRO. When a packet
+exits GRO, either as a coalesced superframe or as an original packet which
+GRO has decided not to coalesce, it is placed on a per-NAPI list. This
+list is then passed to the stack when the number of segments reaches the
+gro_normal_batch limit.
+
+high_order_alloc_disable
+------------------------
+
+By default the allocator for page frags tries to use high order pages (order-3
+on x86). While the default behavior gives good results in most cases, some users
+might have hit a contention in page allocations/freeing. This was especially
+true on older kernels (< 5.14) when high-order pages were not stored on per-cpu
+lists. This allows to opt-in for order-0 allocation instead but is now mostly of
+historical importance.
+
+Default: 0
+
 2. /proc/sys/net/unix - Parameters for Unix domain sockets
 ----------------------------------------------------------
 
diff --git a/Documentation/admin-guide/sysctl/vm.rst b/Documentation/admin-guide/sysctl/vm.rst
index 5e795202111f..45ba1f4dc004 100644
--- a/Documentation/admin-guide/sysctl/vm.rst
+++ b/Documentation/admin-guide/sysctl/vm.rst
@@ -62,6 +62,7 @@ Currently, these files are in /proc/sys/vm:
 - overcommit_memory
 - overcommit_ratio
 - page-cluster
+- page_lock_unfairness
 - panic_on_oom
 - percpu_pagelist_high_fraction
 - stat_interval
@@ -355,7 +356,7 @@ The lowmem_reserve_ratio is an array. You can see them by reading this file::
 
 But, these values are not used directly. The kernel calculates # of protection
 pages for each zones from them. These are shown as array of protection pages
-in /proc/zoneinfo like followings. (This is an example of x86-64 box).
+in /proc/zoneinfo like the following. (This is an example of x86-64 box).
 Each zone has an array of protection pages like this::
 
   Node 0, zone      DMA
@@ -432,7 +433,7 @@ a 2bit error in a memory module) is detected in the background by hardware
 that cannot be handled by the kernel. In some cases (like the page
 still having a valid copy on disk) the kernel will handle the failure
 transparently without affecting any applications. But if there is
-no other uptodate copy of the data it will kill to prevent any data
+no other up-to-date copy of the data it will kill to prevent any data
 corruptions from propagating.
 
 1: Kill all processes that have the corrupted and not reloadable page mapped
@@ -561,6 +562,43 @@ Change the minimum size of the hugepage pool.
 See Documentation/admin-guide/mm/hugetlbpage.rst
 
 
+hugetlb_optimize_vmemmap
+========================
+
+This knob is not available when the size of 'struct page' (a structure defined
+in include/linux/mm_types.h) is not power of two (an unusual system config could
+result in this).
+
+Enable (set to 1) or disable (set to 0) HugeTLB Vmemmap Optimization (HVO).
+
+Once enabled, the vmemmap pages of subsequent allocation of HugeTLB pages from
+buddy allocator will be optimized (7 pages per 2MB HugeTLB page and 4095 pages
+per 1GB HugeTLB page), whereas already allocated HugeTLB pages will not be
+optimized.  When those optimized HugeTLB pages are freed from the HugeTLB pool
+to the buddy allocator, the vmemmap pages representing that range needs to be
+remapped again and the vmemmap pages discarded earlier need to be rellocated
+again.  If your use case is that HugeTLB pages are allocated 'on the fly' (e.g.
+never explicitly allocating HugeTLB pages with 'nr_hugepages' but only set
+'nr_overcommit_hugepages', those overcommitted HugeTLB pages are allocated 'on
+the fly') instead of being pulled from the HugeTLB pool, you should weigh the
+benefits of memory savings against the more overhead (~2x slower than before)
+of allocation or freeing HugeTLB pages between the HugeTLB pool and the buddy
+allocator.  Another behavior to note is that if the system is under heavy memory
+pressure, it could prevent the user from freeing HugeTLB pages from the HugeTLB
+pool to the buddy allocator since the allocation of vmemmap pages could be
+failed, you have to retry later if your system encounter this situation.
+
+Once disabled, the vmemmap pages of subsequent allocation of HugeTLB pages from
+buddy allocator will not be optimized meaning the extra overhead at allocation
+time from buddy allocator disappears, whereas already optimized HugeTLB pages
+will not be affected.  If you want to make sure there are no optimized HugeTLB
+pages, you can set "nr_hugepages" to 0 first and then disable this.  Note that
+writing 0 to nr_hugepages will make any "in use" HugeTLB pages become surplus
+pages.  So, those surplus pages are still optimized until they are no longer
+in use.  You would need to wait for those surplus pages to be released before
+there are no optimized pages in the system.
+
+
 nr_hugepages_mempolicy
 ======================
 
@@ -720,7 +758,7 @@ and don't use much of it.
 
 The default value is 0.
 
-See Documentation/vm/overcommit-accounting.rst and
+See Documentation/mm/overcommit-accounting.rst and
 mm/util.c::__vm_enough_memory() for more information.
 
 
@@ -754,6 +792,14 @@ extra faults and I/O delays for following faults if they would have been part of
 that consecutive pages readahead would have brought in.
 
 
+page_lock_unfairness
+====================
+
+This value determines the number of times that the page lock can be
+stolen from under a waiter. After the lock is stolen the number of times
+specified in this file (default is 5), the "fair lock handoff" semantics
+will apply, and the waiter will only be awakened if the lock can be taken.
+
 panic_on_oom
 ============
 
@@ -880,6 +926,9 @@ calls without any restrictions.
 
 The default value is 0.
 
+Another way to control permissions for userfaultfd is to use
+/dev/userfaultfd instead of userfaultfd(2). See
+Documentation/admin-guide/mm/userfaultfd.rst.
 
 user_reserve_kbytes
 ===================
@@ -948,7 +997,7 @@ how much memory needs to be free before kswapd goes back to sleep.
 
 The unit is in fractions of 10,000. The default value of 10 means the
 distances between watermarks are 0.1% of the available memory in the
-node/system. The maximum value is 1000, or 10% of memory.
+node/system. The maximum value is 3000, or 30% of memory.
 
 A high rate of threads entering direct reclaim (allocstall) or kswapd
 going to sleep prematurely (kswapd_low_wmark_hit_quickly) can indicate
diff --git a/Documentation/admin-guide/sysrq.rst b/Documentation/admin-guide/sysrq.rst
index 0a178ef0111d..51906e47327b 100644
--- a/Documentation/admin-guide/sysrq.rst
+++ b/Documentation/admin-guide/sysrq.rst
@@ -138,7 +138,7 @@ Command	    Function
 ``v``	    Forcefully restores framebuffer console
 ``v``	    Causes ETM buffer dump [ARM-specific]
 
-``w``	    Dumps tasks that are in uninterruptable (blocked) state.
+``w``	    Dumps tasks that are in uninterruptible (blocked) state.
 
 ``x``	    Used by xmon interface on ppc/powerpc platforms.
             Show global PMU Registers on sparc64.
diff --git a/Documentation/admin-guide/tainted-kernels.rst b/Documentation/admin-guide/tainted-kernels.rst
index ceeed7b0798d..92a8a07f5c43 100644
--- a/Documentation/admin-guide/tainted-kernels.rst
+++ b/Documentation/admin-guide/tainted-kernels.rst
@@ -100,6 +100,7 @@ Bit  Log  Number  Reason that got the kernel tainted
  15  _/K   32768  kernel has been live patched
  16  _/X   65536  auxiliary taint, defined for and used by distros
  17  _/T  131072  kernel was built with the struct randomization plugin
+ 18  _/N  262144  an in-kernel test has been run
 ===  ===  ======  ========================================================
 
 Note: The character ``_`` is representing a blank in this table to make reading
@@ -133,6 +134,12 @@ More detailed explanation for tainting
        scsi/snic on something else than x86_64, scsi/ips on non
        x86/x86_64/itanium, have broken firmware settings for the
        irqchip/irq-gic on arm64 ...).
+     - x86/x86_64: Microcode late loading is dangerous and will result in
+       tainting the kernel. It requires that all CPUs rendezvous to make sure
+       the update happens when the system is as quiescent as possible. However,
+       a higher priority MCE/SMI/NMI can move control flow away from that
+       rendezvous and interrupt the update, which can be detrimental to the
+       machine.
 
  3)  ``R`` if a module was force unloaded by ``rmmod -f``, ``' '`` if all
      modules were unloaded normally.
diff --git a/Documentation/admin-guide/thermal/index.rst b/Documentation/admin-guide/thermal/index.rst
new file mode 100644
index 000000000000..193b7b01a87d
--- /dev/null
+++ b/Documentation/admin-guide/thermal/index.rst
@@ -0,0 +1,8 @@
+=================
+Thermal Subsystem
+=================
+
+.. toctree::
+   :maxdepth: 1
+
+   intel_powerclamp
diff --git a/Documentation/driver-api/thermal/intel_powerclamp.rst b/Documentation/admin-guide/thermal/intel_powerclamp.rst
index 3f6dfb0b3ea6..08509b978af4 100644
--- a/Documentation/driver-api/thermal/intel_powerclamp.rst
+++ b/Documentation/admin-guide/thermal/intel_powerclamp.rst
@@ -26,6 +26,8 @@ By:
 	    - Generic Thermal Layer (sysfs)
 	    - Kernel APIs (TBD)
 
+	(*) Module Parameters
+
 INTRODUCTION
 ============
 
@@ -85,7 +87,7 @@ migrated, unless the CPU is taken offline. In this case, threads
 belong to the offlined CPUs will be terminated immediately.
 
 Running as SCHED_FIFO and relatively high priority, also allows such
-scheme to work for both preemptable and non-preemptable kernels.
+scheme to work for both preemptible and non-preemptible kernels.
 Alignment of idle time around jiffies ensures scalability for HZ
 values. This effect can be better visualized using a Perf timechart.
 The following diagram shows the behavior of kernel thread
@@ -153,13 +155,15 @@ b) determine the amount of compensation needed at each target ratio
 Compensation to each target ratio consists of two parts:
 
 	a) steady state error compensation
-	This is to offset the error occurring when the system can
-	enter idle without extra wakeups (such as external interrupts).
+
+	   This is to offset the error occurring when the system can
+	   enter idle without extra wakeups (such as external interrupts).
 
 	b) dynamic error compensation
-	When an excessive amount of wakeups occurs during idle, an
-	additional idle ratio can be added to quiet interrupts, by
-	slowing down CPU activities.
+
+	   When an excessive amount of wakeups occurs during idle, an
+	   additional idle ratio can be added to quiet interrupts, by
+	   slowing down CPU activities.
 
 A debugfs file is provided for the user to examine compensation
 progress and results, such as on a Westmere system::
@@ -281,6 +285,7 @@ cur_state returns value -1 instead of 0 which is to avoid confusing
 100% busy state with the disabled state.
 
 Example usage:
+
 - To inject 25% idle time::
 
 	$ sudo sh -c "echo 25 > /sys/class/thermal/cooling_device80/cur_state
@@ -318,3 +323,23 @@ device, a PID based userspace thermal controller can manage to
 control CPU temperature effectively, when no other thermal influence
 is added. For example, a UltraBook user can compile the kernel under
 certain temperature (below most active trip points).
+
+Module Parameters
+=================
+
+``cpumask`` (RW)
+	A bit mask of CPUs to inject idle. The format of the bitmask is same as
+	used in other subsystems like in /proc/irq/\*/smp_affinity. The mask is
+	comma separated 32 bit groups. Each CPU is one bit. For example for a 256
+	CPU system the full mask is:
+	ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff
+
+	The rightmost mask is for CPU 0-32.
+
+``max_idle`` (RW)
+	Maximum injected idle time to the total CPU time ratio in percent range
+	from 1 to 100. Even if the cooling device max_state is always 100 (100%),
+	this parameter allows to add a max idle percent limit. The default is 50,
+	to match the current implementation of powerclamp driver. Also doesn't
+	allow value more than 75, if the cpumask includes every CPU present in
+	the system.
diff --git a/Documentation/admin-guide/unicode.rst b/Documentation/admin-guide/unicode.rst
index 290fe83ebe82..cba7e5017d36 100644
--- a/Documentation/admin-guide/unicode.rst
+++ b/Documentation/admin-guide/unicode.rst
@@ -3,11 +3,10 @@ Unicode support
 
 		 Last update: 2005-01-17, version 1.4
 
-This file is maintained by H. Peter Anvin <unicode@lanana.org> as part
-of the Linux Assigned Names And Numbers Authority (LANANA) project.
-The current version can be found at:
-
-	    http://www.lanana.org/docs/unicode/admin-guide/unicode.rst
+Note: The original version of this document, which was maintained at
+lanana.org as part of the Linux Assigned Names And Numbers Authority
+(LANANA) project, is no longer existent.  So, this version in the
+mainline Linux kernel is now the maintained main document.
 
 Introduction
 ------------
diff --git a/Documentation/admin-guide/workload-tracing.rst b/Documentation/admin-guide/workload-tracing.rst
new file mode 100644
index 000000000000..b2e254ec8ee8
--- /dev/null
+++ b/Documentation/admin-guide/workload-tracing.rst
@@ -0,0 +1,606 @@
+.. SPDX-License-Identifier: (GPL-2.0+ OR CC-BY-4.0)
+
+======================================================
+Discovering Linux kernel subsystems used by a workload
+======================================================
+
+:Authors: - Shuah Khan <skhan@linuxfoundation.org>
+          - Shefali Sharma <sshefali021@gmail.com>
+:maintained-by: Shuah Khan <skhan@linuxfoundation.org>
+
+Key Points
+==========
+
+ * Understanding system resources necessary to build and run a workload
+   is important.
+ * Linux tracing and strace can be used to discover the system resources
+   in use by a workload. The completeness of the system usage information
+   depends on the completeness of coverage of a workload.
+ * Performance and security of the operating system can be analyzed with
+   the help of tools such as:
+   `perf <https://man7.org/linux/man-pages/man1/perf.1.html>`_,
+   `stress-ng <https://www.mankier.com/1/stress-ng>`_,
+   `paxtest <https://github.com/opntr/paxtest-freebsd>`_.
+ * Once we discover and understand the workload needs, we can focus on them
+   to avoid regressions and use it to evaluate safety considerations.
+
+Methodology
+===========
+
+`strace <https://man7.org/linux/man-pages/man1/strace.1.html>`_ is a
+diagnostic, instructional, and debugging tool and can be used to discover
+the system resources in use by a workload. Once we discover and understand
+the workload needs, we can focus on them to avoid regressions and use it
+to evaluate safety considerations. We use strace tool to trace workloads.
+
+This method of tracing using strace tells us the system calls invoked by
+the workload and doesn't include all the system calls that can be invoked
+by it. In addition, this tracing method tells us just the code paths within
+these system calls that are invoked. As an example, if a workload opens a
+file and reads from it successfully, then the success path is the one that
+is traced. Any error paths in that system call will not be traced. If there
+is a workload that provides full coverage of a workload then the method
+outlined here will trace and find all possible code paths. The completeness
+of the system usage information depends on the completeness of coverage of a
+workload.
+
+The goal is tracing a workload on a system running a default kernel without
+requiring custom kernel installs.
+
+How do we gather fine-grained system information?
+=================================================
+
+strace tool can be used to trace system calls made by a process and signals
+it receives. System calls are the fundamental interface between an
+application and the operating system kernel. They enable a program to
+request services from the kernel. For instance, the open() system call in
+Linux is used to provide access to a file in the file system. strace enables
+us to track all the system calls made by an application. It lists all the
+system calls made by a process and their resulting output.
+
+You can generate profiling data combining strace and perf record tools to
+record the events and information associated with a process. This provides
+insight into the process. "perf annotate" tool generates the statistics of
+each instruction of the program. This document goes over the details of how
+to gather fine-grained information on a workload's usage of system resources.
+
+We used strace to trace the perf, stress-ng, paxtest workloads to illustrate
+our methodology to discover resources used by a workload. This process can
+be applied to trace other workloads.
+
+Getting the system ready for tracing
+====================================
+
+Before we can get started we will show you how to get your system ready.
+We assume that you have a Linux distribution running on a physical system
+or a virtual machine. Most distributions will include strace command. Let’s
+install other tools that aren’t usually included to build Linux kernel.
+Please note that the following works on Debian based distributions. You
+might have to find equivalent packages on other Linux distributions.
+
+Install tools to build Linux kernel and tools in kernel repository.
+scripts/ver_linux is a good way to check if your system already has
+the necessary tools::
+
+  sudo apt-get build-essentials flex bison yacc
+  sudo apt install libelf-dev systemtap-sdt-dev libaudit-dev libslang2-dev libperl-dev libdw-dev
+
+cscope is a good tool to browse kernel sources. Let's install it now::
+
+  sudo apt-get install cscope
+
+Install stress-ng and paxtest::
+
+  apt-get install stress-ng
+  apt-get install paxtest
+
+Workload overview
+=================
+
+As mentioned earlier, we used strace to trace perf bench, stress-ng and
+paxtest workloads to show how to analyze a workload and identify Linux
+subsystems used by these workloads. Let's start with an overview of these
+three workloads to get a better understanding of what they do and how to
+use them.
+
+perf bench (all) workload
+-------------------------
+
+The perf bench command contains multiple multi-threaded microkernel
+benchmarks for executing different subsystems in the Linux kernel and
+system calls. This allows us to easily measure the impact of changes,
+which can help mitigate performance regressions. It also acts as a common
+benchmarking framework, enabling developers to easily create test cases,
+integrate transparently, and use performance-rich tooling subsystems.
+
+Stress-ng netdev stressor workload
+----------------------------------
+
+stress-ng is used for performing stress testing on the kernel. It allows
+you to exercise various physical subsystems of the computer, as well as
+interfaces of the OS kernel, using "stressor-s". They are available for
+CPU, CPU cache, devices, I/O, interrupts, file system, memory, network,
+operating system, pipelines, schedulers, and virtual machines. Please refer
+to the `stress-ng man-page <https://www.mankier.com/1/stress-ng>`_ to
+find the description of all the available stressor-s. The netdev stressor
+starts specified number (N) of workers that exercise various netdevice
+ioctl commands across all the available network devices.
+
+paxtest kiddie workload
+-----------------------
+
+paxtest is a program that tests buffer overflows in the kernel. It tests
+kernel enforcements over memory usage. Generally, execution in some memory
+segments makes buffer overflows possible. It runs a set of programs that
+attempt to subvert memory usage. It is used as a regression test suite for
+PaX, but might be useful to test other memory protection patches for the
+kernel. We used paxtest kiddie mode which looks for simple vulnerabilities.
+
+What is strace and how do we use it?
+====================================
+
+As mentioned earlier, strace which is a useful diagnostic, instructional,
+and debugging tool and can be used to discover the system resources in use
+by a workload. It can be used:
+
+ * To see how a process interacts with the kernel.
+ * To see why a process is failing or hanging.
+ * For reverse engineering a process.
+ * To find the files on which a program depends.
+ * For analyzing the performance of an application.
+ * For troubleshooting various problems related to the operating system.
+
+In addition, strace can generate run-time statistics on times, calls, and
+errors for each system call and report a summary when program exits,
+suppressing the regular output. This attempts to show system time (CPU time
+spent running in the kernel) independent of wall clock time. We plan to use
+these features to get information on workload system usage.
+
+strace command supports basic, verbose, and stats modes. strace command when
+run in verbose mode gives more detailed information about the system calls
+invoked by a process.
+
+Running strace -c generates a report of the percentage of time spent in each
+system call, the total time in seconds, the microseconds per call, the total
+number of calls, the count of each system call that has failed with an error
+and the type of system call made.
+
+ * Usage: strace <command we want to trace>
+ * Verbose mode usage: strace -v <command>
+ * Gather statistics: strace -c <command>
+
+We used the “-c” option to gather fine-grained run-time statistics in use
+by three workloads we have chose for this analysis.
+
+ * perf
+ * stress-ng
+ * paxtest
+
+What is cscope and how do we use it?
+====================================
+
+Now let’s look at `cscope <https://cscope.sourceforge.net/>`_, a command
+line tool for browsing C, C++ or Java code-bases. We can use it to find
+all the references to a symbol, global definitions, functions called by a
+function, functions calling a function, text strings, regular expression
+patterns, files including a file.
+
+We can use cscope to find which system call belongs to which subsystem.
+This way we can find the kernel subsystems used by a process when it is
+executed.
+
+Let’s checkout the latest Linux repository and build cscope database::
+
+  git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git linux
+  cd linux
+  cscope -R -p10  # builds cscope.out database before starting browse session
+  cscope -d -p10  # starts browse session on cscope.out database
+
+Note: Run "cscope -R -p10" to build the database and c"scope -d -p10" to
+enter into the browsing session. cscope by default cscope.out database.
+To get out of this mode press ctrl+d. -p option is used to specify the
+number of file path components to display. -p10 is optimal for browsing
+kernel sources.
+
+What is perf and how do we use it?
+==================================
+
+Perf is an analysis tool based on Linux 2.6+ systems, which abstracts the
+CPU hardware difference in performance measurement in Linux, and provides
+a simple command line interface. Perf is based on the perf_events interface
+exported by the kernel. It is very useful for profiling the system and
+finding performance bottlenecks in an application.
+
+If you haven't already checked out the Linux mainline repository, you can do
+so and then build kernel and perf tool::
+
+  git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git linux
+  cd linux
+  make -j3 all
+  cd tools/perf
+  make
+
+Note: The perf command can be built without building the kernel in the
+repository and can be run on older kernels. However matching the kernel
+and perf revisions gives more accurate information on the subsystem usage.
+
+We used "perf stat" and "perf bench" options. For a detailed information on
+the perf tool, run "perf -h".
+
+perf stat
+---------
+The perf stat command generates a report of various hardware and software
+events. It does so with the help of hardware counter registers found in
+modern CPUs that keep the count of these activities. "perf stat cal" shows
+stats for cal command.
+
+Perf bench
+----------
+The perf bench command contains multiple multi-threaded microkernel
+benchmarks for executing different subsystems in the Linux kernel and
+system calls. This allows us to easily measure the impact of changes,
+which can help mitigate performance regressions. It also acts as a common
+benchmarking framework, enabling developers to easily create test cases,
+integrate transparently, and use performance-rich tooling.
+
+"perf bench all" command runs the following benchmarks:
+
+ * sched/messaging
+ * sched/pipe
+ * syscall/basic
+ * mem/memcpy
+ * mem/memset
+
+What is stress-ng and how do we use it?
+=======================================
+
+As mentioned earlier, stress-ng is used for performing stress testing on
+the kernel. It allows you to exercise various physical subsystems of the
+computer, as well as interfaces of the OS kernel, using stressor-s. They
+are available for CPU, CPU cache, devices, I/O, interrupts, file system,
+memory, network, operating system, pipelines, schedulers, and virtual
+machines.
+
+The netdev stressor starts N workers that exercise various netdevice ioctl
+commands across all the available network devices. The following ioctls are
+exercised:
+
+ * SIOCGIFCONF, SIOCGIFINDEX, SIOCGIFNAME, SIOCGIFFLAGS
+ * SIOCGIFADDR, SIOCGIFNETMASK, SIOCGIFMETRIC, SIOCGIFMTU
+ * SIOCGIFHWADDR, SIOCGIFMAP, SIOCGIFTXQLEN
+
+The following command runs the stressor::
+
+  stress-ng --netdev 1 -t 60 --metrics command.
+
+We can use the perf record command to record the events and information
+associated with a process. This command records the profiling data in the
+perf.data file in the same directory.
+
+Using the following commands you can record the events associated with the
+netdev stressor, view the generated report perf.data and annotate the to
+view the statistics of each instruction of the program::
+
+  perf record stress-ng --netdev 1 -t 60 --metrics command.
+  perf report
+  perf annotate
+
+What is paxtest and how do we use it?
+=====================================
+
+paxtest is a program that tests buffer overflows in the kernel. It tests
+kernel enforcements over memory usage. Generally, execution in some memory
+segments makes buffer overflows possible. It runs a set of programs that
+attempt to subvert memory usage. It is used as a regression test suite for
+PaX, and will be useful to test other memory protection patches for the
+kernel.
+
+paxtest provides kiddie and blackhat modes. The paxtest kiddie mode runs
+in normal mode, whereas the blackhat mode tries to get around the protection
+of the kernel testing for vulnerabilities. We focus on the kiddie mode here
+and combine "paxtest kiddie" run with "perf record" to collect CPU stack
+traces for the paxtest kiddie run to see which function is calling other
+functions in the performance profile. Then the "dwarf" (DWARF's Call Frame
+Information) mode can be used to unwind the stack.
+
+The following command can be used to view resulting report in call-graph
+format::
+
+  perf record --call-graph dwarf paxtest kiddie
+  perf report --stdio
+
+Tracing workloads
+=================
+
+Now that we understand the workloads, let's start tracing them.
+
+Tracing perf bench all workload
+-------------------------------
+
+Run the following command to trace perf bench all workload::
+
+ strace -c perf bench all
+
+**System Calls made by the workload**
+
+The below table shows the system calls invoked by the workload, number of
+times each system call is invoked, and the corresponding Linux subsystem.
+
++-------------------+-----------+-----------------+-------------------------+
+| System Call       | # calls   | Linux Subsystem | System Call (API)       |
++===================+===========+=================+=========================+
+| getppid           | 10000001  | Process Mgmt    | sys_getpid()            |
++-------------------+-----------+-----------------+-------------------------+
+| clone             | 1077      | Process Mgmt.   | sys_clone()             |
++-------------------+-----------+-----------------+-------------------------+
+| prctl             | 23        | Process Mgmt.   | sys_prctl()             |
++-------------------+-----------+-----------------+-------------------------+
+| prlimit64         | 7         | Process Mgmt.   | sys_prlimit64()         |
++-------------------+-----------+-----------------+-------------------------+
+| getpid            | 10        | Process Mgmt.   | sys_getpid()            |
++-------------------+-----------+-----------------+-------------------------+
+| uname             | 3         | Process Mgmt.   | sys_uname()             |
++-------------------+-----------+-----------------+-------------------------+
+| sysinfo           | 1         | Process Mgmt.   | sys_sysinfo()           |
++-------------------+-----------+-----------------+-------------------------+
+| getuid            | 1         | Process Mgmt.   | sys_getuid()            |
++-------------------+-----------+-----------------+-------------------------+
+| getgid            | 1         | Process Mgmt.   | sys_getgid()            |
++-------------------+-----------+-----------------+-------------------------+
+| geteuid           | 1         | Process Mgmt.   | sys_geteuid()           |
++-------------------+-----------+-----------------+-------------------------+
+| getegid           | 1         | Process Mgmt.   | sys_getegid             |
++-------------------+-----------+-----------------+-------------------------+
+| close             | 49951     | Filesystem      | sys_close()             |
++-------------------+-----------+-----------------+-------------------------+
+| pipe              | 604       | Filesystem      | sys_pipe()              |
++-------------------+-----------+-----------------+-------------------------+
+| openat            | 48560     | Filesystem      | sys_opennat()           |
++-------------------+-----------+-----------------+-------------------------+
+| fstat             | 8338      | Filesystem      | sys_fstat()             |
++-------------------+-----------+-----------------+-------------------------+
+| stat              | 1573      | Filesystem      | sys_stat()              |
++-------------------+-----------+-----------------+-------------------------+
+| pread64           | 9646      | Filesystem      | sys_pread64()           |
++-------------------+-----------+-----------------+-------------------------+
+| getdents64        | 1873      | Filesystem      | sys_getdents64()        |
++-------------------+-----------+-----------------+-------------------------+
+| access            | 3         | Filesystem      | sys_access()            |
++-------------------+-----------+-----------------+-------------------------+
+| lstat             | 1880      | Filesystem      | sys_lstat()             |
++-------------------+-----------+-----------------+-------------------------+
+| lseek             | 6         | Filesystem      | sys_lseek()             |
++-------------------+-----------+-----------------+-------------------------+
+| ioctl             | 3         | Filesystem      | sys_ioctl()             |
++-------------------+-----------+-----------------+-------------------------+
+| dup2              | 1         | Filesystem      | sys_dup2()              |
++-------------------+-----------+-----------------+-------------------------+
+| execve            | 2         | Filesystem      | sys_execve()            |
++-------------------+-----------+-----------------+-------------------------+
+| fcntl             | 8779      | Filesystem      | sys_fcntl()             |
++-------------------+-----------+-----------------+-------------------------+
+| statfs            | 1         | Filesystem      | sys_statfs()            |
++-------------------+-----------+-----------------+-------------------------+
+| epoll_create      | 2         | Filesystem      | sys_epoll_create()      |
++-------------------+-----------+-----------------+-------------------------+
+| epoll_ctl         | 64        | Filesystem      | sys_epoll_ctl()         |
++-------------------+-----------+-----------------+-------------------------+
+| newfstatat        | 8318      | Filesystem      | sys_newfstatat()        |
++-------------------+-----------+-----------------+-------------------------+
+| eventfd2          | 192       | Filesystem      | sys_eventfd2()          |
++-------------------+-----------+-----------------+-------------------------+
+| mmap              | 243       | Memory Mgmt.    | sys_mmap()              |
++-------------------+-----------+-----------------+-------------------------+
+| mprotect          | 32        | Memory Mgmt.    | sys_mprotect()          |
++-------------------+-----------+-----------------+-------------------------+
+| brk               | 21        | Memory Mgmt.    | sys_brk()               |
++-------------------+-----------+-----------------+-------------------------+
+| munmap            | 128       | Memory Mgmt.    | sys_munmap()            |
++-------------------+-----------+-----------------+-------------------------+
+| set_mempolicy     | 156       | Memory Mgmt.    | sys_set_mempolicy()     |
++-------------------+-----------+-----------------+-------------------------+
+| set_tid_address   | 1         | Process Mgmt.   | sys_set_tid_address()   |
++-------------------+-----------+-----------------+-------------------------+
+| set_robust_list   | 1         | Futex           | sys_set_robust_list()   |
++-------------------+-----------+-----------------+-------------------------+
+| futex             | 341       | Futex           | sys_futex()             |
++-------------------+-----------+-----------------+-------------------------+
+| sched_getaffinity | 79        | Scheduler       | sys_sched_getaffinity() |
++-------------------+-----------+-----------------+-------------------------+
+| sched_setaffinity | 223       | Scheduler       | sys_sched_setaffinity() |
++-------------------+-----------+-----------------+-------------------------+
+| socketpair        | 202       | Network         | sys_socketpair()        |
++-------------------+-----------+-----------------+-------------------------+
+| rt_sigprocmask    | 21        | Signal          | sys_rt_sigprocmask()    |
++-------------------+-----------+-----------------+-------------------------+
+| rt_sigaction      | 36        | Signal          | sys_rt_sigaction()      |
++-------------------+-----------+-----------------+-------------------------+
+| rt_sigreturn      | 2         | Signal          | sys_rt_sigreturn()      |
++-------------------+-----------+-----------------+-------------------------+
+| wait4             | 889       | Time            | sys_wait4()             |
++-------------------+-----------+-----------------+-------------------------+
+| clock_nanosleep   | 37        | Time            | sys_clock_nanosleep()   |
++-------------------+-----------+-----------------+-------------------------+
+| capget            | 4         | Capability      | sys_capget()            |
++-------------------+-----------+-----------------+-------------------------+
+
+Tracing stress-ng netdev stressor workload
+------------------------------------------
+
+Run the following command to trace stress-ng netdev stressor workload::
+
+  strace -c  stress-ng --netdev 1 -t 60 --metrics
+
+**System Calls made by the workload**
+
+The below table shows the system calls invoked by the workload, number of
+times each system call is invoked, and the corresponding Linux subsystem.
+
++-------------------+-----------+-----------------+-------------------------+
+| System Call       | # calls   | Linux Subsystem | System Call (API)       |
++===================+===========+=================+=========================+
+| openat            | 74        | Filesystem      | sys_openat()            |
++-------------------+-----------+-----------------+-------------------------+
+| close             | 75        | Filesystem      | sys_close()             |
++-------------------+-----------+-----------------+-------------------------+
+| read              | 58        | Filesystem      | sys_read()              |
++-------------------+-----------+-----------------+-------------------------+
+| fstat             | 20        | Filesystem      | sys_fstat()             |
++-------------------+-----------+-----------------+-------------------------+
+| flock             | 10        | Filesystem      | sys_flock()             |
++-------------------+-----------+-----------------+-------------------------+
+| write             | 7         | Filesystem      | sys_write()             |
++-------------------+-----------+-----------------+-------------------------+
+| getdents64        | 8         | Filesystem      | sys_getdents64()        |
++-------------------+-----------+-----------------+-------------------------+
+| pread64           | 8         | Filesystem      | sys_pread64()           |
++-------------------+-----------+-----------------+-------------------------+
+| lseek             | 1         | Filesystem      | sys_lseek()             |
++-------------------+-----------+-----------------+-------------------------+
+| access            | 2         | Filesystem      | sys_access()            |
++-------------------+-----------+-----------------+-------------------------+
+| getcwd            | 1         | Filesystem      | sys_getcwd()            |
++-------------------+-----------+-----------------+-------------------------+
+| execve            | 1         | Filesystem      | sys_execve()            |
++-------------------+-----------+-----------------+-------------------------+
+| mmap              | 61        | Memory Mgmt.    | sys_mmap()              |
++-------------------+-----------+-----------------+-------------------------+
+| munmap            | 3         | Memory Mgmt.    | sys_munmap()            |
++-------------------+-----------+-----------------+-------------------------+
+| mprotect          | 20        | Memory Mgmt.    | sys_mprotect()          |
++-------------------+-----------+-----------------+-------------------------+
+| mlock             | 2         | Memory Mgmt.    | sys_mlock()             |
++-------------------+-----------+-----------------+-------------------------+
+| brk               | 3         | Memory Mgmt.    | sys_brk()               |
++-------------------+-----------+-----------------+-------------------------+
+| rt_sigaction      | 21        | Signal          | sys_rt_sigaction()      |
++-------------------+-----------+-----------------+-------------------------+
+| rt_sigprocmask    | 1         | Signal          | sys_rt_sigprocmask()    |
++-------------------+-----------+-----------------+-------------------------+
+| sigaltstack       | 1         | Signal          | sys_sigaltstack()       |
++-------------------+-----------+-----------------+-------------------------+
+| rt_sigreturn      | 1         | Signal          | sys_rt_sigreturn()      |
++-------------------+-----------+-----------------+-------------------------+
+| getpid            | 8         | Process Mgmt.   | sys_getpid()            |
++-------------------+-----------+-----------------+-------------------------+
+| prlimit64         | 5         | Process Mgmt.   | sys_prlimit64()         |
++-------------------+-----------+-----------------+-------------------------+
+| arch_prctl        | 2         | Process Mgmt.   | sys_arch_prctl()        |
++-------------------+-----------+-----------------+-------------------------+
+| sysinfo           | 2         | Process Mgmt.   | sys_sysinfo()           |
++-------------------+-----------+-----------------+-------------------------+
+| getuid            | 2         | Process Mgmt.   | sys_getuid()            |
++-------------------+-----------+-----------------+-------------------------+
+| uname             | 1         | Process Mgmt.   | sys_uname()             |
++-------------------+-----------+-----------------+-------------------------+
+| setpgid           | 1         | Process Mgmt.   | sys_setpgid()           |
++-------------------+-----------+-----------------+-------------------------+
+| getrusage         | 1         | Process Mgmt.   | sys_getrusage()         |
++-------------------+-----------+-----------------+-------------------------+
+| geteuid           | 1         | Process Mgmt.   | sys_geteuid()           |
++-------------------+-----------+-----------------+-------------------------+
+| getppid           | 1         | Process Mgmt.   | sys_getppid()           |
++-------------------+-----------+-----------------+-------------------------+
+| sendto            | 3         | Network         | sys_sendto()            |
++-------------------+-----------+-----------------+-------------------------+
+| connect           | 1         | Network         | sys_connect()           |
++-------------------+-----------+-----------------+-------------------------+
+| socket            | 1         | Network         | sys_socket()            |
++-------------------+-----------+-----------------+-------------------------+
+| clone             | 1         | Process Mgmt.   | sys_clone()             |
++-------------------+-----------+-----------------+-------------------------+
+| set_tid_address   | 1         | Process Mgmt.   | sys_set_tid_address()   |
++-------------------+-----------+-----------------+-------------------------+
+| wait4             | 2         | Time            | sys_wait4()             |
++-------------------+-----------+-----------------+-------------------------+
+| alarm             | 1         | Time            | sys_alarm()             |
++-------------------+-----------+-----------------+-------------------------+
+| set_robust_list   | 1         | Futex           | sys_set_robust_list()   |
++-------------------+-----------+-----------------+-------------------------+
+
+Tracing paxtest kiddie workload
+-------------------------------
+
+Run the following command to trace paxtest kiddie workload::
+
+ strace -c paxtest kiddie
+
+**System Calls made by the workload**
+
+The below table shows the system calls invoked by the workload, number of
+times each system call is invoked, and the corresponding Linux subsystem.
+
++-------------------+-----------+-----------------+----------------------+
+| System Call       | # calls   | Linux Subsystem | System Call (API)    |
++===================+===========+=================+======================+
+| read              | 3         | Filesystem      | sys_read()           |
++-------------------+-----------+-----------------+----------------------+
+| write             | 11        | Filesystem      | sys_write()          |
++-------------------+-----------+-----------------+----------------------+
+| close             | 41        | Filesystem      | sys_close()          |
++-------------------+-----------+-----------------+----------------------+
+| stat              | 24        | Filesystem      | sys_stat()           |
++-------------------+-----------+-----------------+----------------------+
+| fstat             | 2         | Filesystem      | sys_fstat()          |
++-------------------+-----------+-----------------+----------------------+
+| pread64           | 6         | Filesystem      | sys_pread64()        |
++-------------------+-----------+-----------------+----------------------+
+| access            | 1         | Filesystem      | sys_access()         |
++-------------------+-----------+-----------------+----------------------+
+| pipe              | 1         | Filesystem      | sys_pipe()           |
++-------------------+-----------+-----------------+----------------------+
+| dup2              | 24        | Filesystem      | sys_dup2()           |
++-------------------+-----------+-----------------+----------------------+
+| execve            | 1         | Filesystem      | sys_execve()         |
++-------------------+-----------+-----------------+----------------------+
+| fcntl             | 26        | Filesystem      | sys_fcntl()          |
++-------------------+-----------+-----------------+----------------------+
+| openat            | 14        | Filesystem      | sys_openat()         |
++-------------------+-----------+-----------------+----------------------+
+| rt_sigaction      | 7         | Signal          | sys_rt_sigaction()   |
++-------------------+-----------+-----------------+----------------------+
+| rt_sigreturn      | 38        | Signal          | sys_rt_sigreturn()   |
++-------------------+-----------+-----------------+----------------------+
+| clone             | 38        | Process Mgmt.   | sys_clone()          |
++-------------------+-----------+-----------------+----------------------+
+| wait4             | 44        | Time            | sys_wait4()          |
++-------------------+-----------+-----------------+----------------------+
+| mmap              | 7         | Memory Mgmt.    | sys_mmap()           |
++-------------------+-----------+-----------------+----------------------+
+| mprotect          | 3         | Memory Mgmt.    | sys_mprotect()       |
++-------------------+-----------+-----------------+----------------------+
+| munmap            | 1         | Memory Mgmt.    | sys_munmap()         |
++-------------------+-----------+-----------------+----------------------+
+| brk               | 3         | Memory Mgmt.    | sys_brk()            |
++-------------------+-----------+-----------------+----------------------+
+| getpid            | 1         | Process Mgmt.   | sys_getpid()         |
++-------------------+-----------+-----------------+----------------------+
+| getuid            | 1         | Process Mgmt.   | sys_getuid()         |
++-------------------+-----------+-----------------+----------------------+
+| getgid            | 1         | Process Mgmt.   | sys_getgid()         |
++-------------------+-----------+-----------------+----------------------+
+| geteuid           | 2         | Process Mgmt.   | sys_geteuid()        |
++-------------------+-----------+-----------------+----------------------+
+| getegid           | 1         | Process Mgmt.   | sys_getegid()        |
++-------------------+-----------+-----------------+----------------------+
+| getppid           | 1         | Process Mgmt.   | sys_getppid()        |
++-------------------+-----------+-----------------+----------------------+
+| arch_prctl        | 2         | Process Mgmt.   | sys_arch_prctl()     |
++-------------------+-----------+-----------------+----------------------+
+
+Conclusion
+==========
+
+This document is intended to be used as a guide on how to gather fine-grained
+information on the resources in use by workloads using strace.
+
+References
+==========
+
+ * `Discovery Linux Kernel Subsystems used by OpenAPS <https://elisa.tech/blog/2022/02/02/discovery-linux-kernel-subsystems-used-by-openaps>`_
+ * `ELISA-White-Papers-Discovering Linux kernel subsystems used by a workload <https://github.com/elisa-tech/ELISA-White-Papers/blob/master/Processes/Discovering_Linux_kernel_subsystems_used_by_a_workload.md>`_
+ * `strace <https://man7.org/linux/man-pages/man1/strace.1.html>`_
+ * `perf <https://man7.org/linux/man-pages/man1/perf.1.html>`_
+ * `paxtest README <https://github.com/opntr/paxtest-freebsd/blob/hardenedbsd/0.9.14-hbsd/README>`_
+ * `stress-ng <https://www.mankier.com/1/stress-ng>`_
+ * `Monitoring and managing system status and performance <https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html/monitoring_and_managing_system_status_and_performance/index>`_
diff --git a/Documentation/admin-guide/xfs.rst b/Documentation/admin-guide/xfs.rst
index 8de008c0c5ad..3a9c041d7f6c 100644
--- a/Documentation/admin-guide/xfs.rst
+++ b/Documentation/admin-guide/xfs.rst
@@ -236,13 +236,14 @@ the dates listed above.
 Deprecated Mount Options
 ========================
 
-===========================     ================
+============================    ================
   Name				Removal Schedule
-===========================     ================
+============================    ================
 Mounting with V4 filesystem     September 2030
+Mounting ascii-ci filesystem    September 2030
 ikeep/noikeep			September 2025
 attr2/noattr2			September 2025
-===========================     ================
+============================    ================
 
 
 Removed Mount Options
@@ -296,7 +297,7 @@ The following sysctls are available for the XFS filesystem:
 		XFS_ERRLEVEL_LOW:       1
 		XFS_ERRLEVEL_HIGH:      5
 
-  fs.xfs.panic_mask		(Min: 0  Default: 0  Max: 256)
+  fs.xfs.panic_mask		(Min: 0  Default: 0  Max: 511)
 	Causes certain error conditions to call BUG(). Value is a bitmask;
 	OR together the tags which represent errors which should cause panics:
 
diff --git a/Documentation/arch.rst b/Documentation/arch.rst
deleted file mode 100644
index f10bd32a5972..000000000000
--- a/Documentation/arch.rst
+++ /dev/null
@@ -1,26 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-CPU Architectures
-=================
-
-These books provide programming details about architecture-specific
-implementation.
-
-.. toctree::
-   :maxdepth: 2
-
-   arm/index
-   arm64/index
-   ia64/index
-   m68k/index
-   mips/index
-   nios2/index
-   openrisc/index
-   parisc/index
-   powerpc/index
-   riscv/index
-   s390/index
-   sh/index
-   sparc/index
-   x86/index
-   xtensa/index
diff --git a/Documentation/arch/arc/arc.rst b/Documentation/arch/arc/arc.rst
new file mode 100644
index 000000000000..6c4d978f3f4e
--- /dev/null
+++ b/Documentation/arch/arc/arc.rst
@@ -0,0 +1,85 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Linux kernel for ARC processors
+*******************************
+
+Other sources of information
+############################
+
+Below are some resources where more information can be found on
+ARC processors and relevant open source projects.
+
+- `<https://embarc.org>`_ - Community portal for open source on ARC.
+  Good place to start to find relevant FOSS projects, toolchain releases,
+  news items and more.
+
+- `<https://github.com/foss-for-synopsys-dwc-arc-processors>`_ -
+  Home for all development activities regarding open source projects for
+  ARC processors. Some of the projects are forks of various upstream projects,
+  where "work in progress" is hosted prior to submission to upstream projects.
+  Other projects are developed by Synopsys and made available to community
+  as open source for use on ARC Processors.
+
+- `Official Synopsys ARC Processors website
+  <https://www.synopsys.com/designware-ip/processor-solutions.html>`_ -
+  location, with access to some IP documentation (`Programmer's Reference
+  Manual, AKA PRM for ARC HS processors
+  <https://www.synopsys.com/dw/doc.php/ds/cc/programmers-reference-manual-ARC-HS.pdf>`_)
+  and free versions of some commercial tools (`Free nSIM
+  <https://www.synopsys.com/cgi-bin/dwarcnsim/req1.cgi>`_ and
+  `MetaWare Light Edition <https://www.synopsys.com/cgi-bin/arcmwtk_lite/reg1.cgi>`_).
+  Please note though, registration is required to access both the documentation and
+  the tools.
+
+Important note on ARC processors configurability
+################################################
+
+ARC processors are highly configurable and several configurable options
+are supported in Linux. Some options are transparent to software
+(i.e cache geometries, some can be detected at runtime and configured
+and used accordingly, while some need to be explicitly selected or configured
+in the kernel's configuration utility (AKA "make menuconfig").
+
+However not all configurable options are supported when an ARC processor
+is to run Linux. SoC design teams should refer to "Appendix E:
+Configuration for ARC Linux" in the ARC HS Databook for configurability
+guidelines.
+
+Following these guidelines and selecting valid configuration options
+up front is critical to help prevent any unwanted issues during
+SoC bringup and software development in general.
+
+Building the Linux kernel for ARC processors
+############################################
+
+The process of kernel building for ARC processors is the same as for any other
+architecture and could be done in 2 ways:
+
+- Cross-compilation: process of compiling for ARC targets on a development
+  host with a different processor architecture (generally x86_64/amd64).
+- Native compilation: process of compiling for ARC on a ARC platform
+  (hardware board or a simulator like QEMU) with complete development environment
+  (GNU toolchain, dtc, make etc) installed on the platform.
+
+In both cases, up-to-date GNU toolchain for ARC for the host is needed.
+Synopsys offers prebuilt toolchain releases which can be used for this purpose,
+available from:
+
+- Synopsys GNU toolchain releases:
+  `<https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases>`_
+
+- Linux kernel compilers collection:
+  `<https://mirrors.edge.kernel.org/pub/tools/crosstool>`_
+
+- Bootlin's toolchain collection: `<https://toolchains.bootlin.com>`_
+
+Once the toolchain is installed in the system, make sure its "bin" folder
+is added in your ``PATH`` environment variable. Then set ``ARCH=arc`` &
+``CROSS_COMPILE=arc-linux`` (or whatever matches installed ARC toolchain prefix)
+and then as usual ``make defconfig && make``.
+
+This will produce "vmlinux" file in the root of the kernel source tree
+usable for loading on the target system via JTAG.
+If you need to get an image usable with U-Boot bootloader,
+type ``make uImage`` and ``uImage`` will be produced in ``arch/arc/boot``
+folder.
diff --git a/Documentation/arch/arc/features.rst b/Documentation/arch/arc/features.rst
new file mode 100644
index 000000000000..b793583d688a
--- /dev/null
+++ b/Documentation/arch/arc/features.rst
@@ -0,0 +1,3 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. kernel-feat:: $srctree/Documentation/features arc
diff --git a/Documentation/arch/arc/index.rst b/Documentation/arch/arc/index.rst
new file mode 100644
index 000000000000..7b098d4a5e3e
--- /dev/null
+++ b/Documentation/arch/arc/index.rst
@@ -0,0 +1,17 @@
+===================
+ARC architecture
+===================
+
+.. toctree::
+    :maxdepth: 1
+
+    arc
+
+    features
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/ia64/aliasing.rst b/Documentation/arch/ia64/aliasing.rst
index a08b36aba015..36a1e1d4842b 100644
--- a/Documentation/ia64/aliasing.rst
+++ b/Documentation/arch/ia64/aliasing.rst
@@ -61,7 +61,7 @@ Memory Map
     The efi_memmap table is preserved unmodified because the original
     boot-time information is required for kexec.
 
-Kernel Identify Mappings
+Kernel Identity Mappings
 ========================
 
     Linux/ia64 identity mappings are done with large pages, currently
diff --git a/Documentation/ia64/efirtc.rst b/Documentation/arch/ia64/efirtc.rst
index fd8328408301..fd8328408301 100644
--- a/Documentation/ia64/efirtc.rst
+++ b/Documentation/arch/ia64/efirtc.rst
diff --git a/Documentation/ia64/err_inject.rst b/Documentation/arch/ia64/err_inject.rst
index 900f71e93a29..900f71e93a29 100644
--- a/Documentation/ia64/err_inject.rst
+++ b/Documentation/arch/ia64/err_inject.rst
diff --git a/Documentation/ia64/features.rst b/Documentation/arch/ia64/features.rst
index d7226fdcf5f8..d7226fdcf5f8 100644
--- a/Documentation/ia64/features.rst
+++ b/Documentation/arch/ia64/features.rst
diff --git a/Documentation/ia64/fsys.rst b/Documentation/arch/ia64/fsys.rst
index a702d2cc94b6..a702d2cc94b6 100644
--- a/Documentation/ia64/fsys.rst
+++ b/Documentation/arch/ia64/fsys.rst
diff --git a/Documentation/ia64/ia64.rst b/Documentation/arch/ia64/ia64.rst
index b725019a9492..b725019a9492 100644
--- a/Documentation/ia64/ia64.rst
+++ b/Documentation/arch/ia64/ia64.rst
diff --git a/Documentation/ia64/index.rst b/Documentation/arch/ia64/index.rst
index 761f2154dfa2..761f2154dfa2 100644
--- a/Documentation/ia64/index.rst
+++ b/Documentation/arch/ia64/index.rst
diff --git a/Documentation/ia64/irq-redir.rst b/Documentation/arch/ia64/irq-redir.rst
index 6bbbbe4f73ef..6bbbbe4f73ef 100644
--- a/Documentation/ia64/irq-redir.rst
+++ b/Documentation/arch/ia64/irq-redir.rst
diff --git a/Documentation/ia64/mca.rst b/Documentation/arch/ia64/mca.rst
index 08270bba44a4..08270bba44a4 100644
--- a/Documentation/ia64/mca.rst
+++ b/Documentation/arch/ia64/mca.rst
diff --git a/Documentation/ia64/serial.rst b/Documentation/arch/ia64/serial.rst
index 1de70c305a79..1de70c305a79 100644
--- a/Documentation/ia64/serial.rst
+++ b/Documentation/arch/ia64/serial.rst
diff --git a/Documentation/arch/index.rst b/Documentation/arch/index.rst
new file mode 100644
index 000000000000..80ee31016584
--- /dev/null
+++ b/Documentation/arch/index.rst
@@ -0,0 +1,28 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+CPU Architectures
+=================
+
+These books provide programming details about architecture-specific
+implementation.
+
+.. toctree::
+   :maxdepth: 2
+
+   arc/index
+   ../arm/index
+   ../arm64/index
+   ia64/index
+   ../loongarch/index
+   m68k/index
+   ../mips/index
+   nios2/index
+   openrisc/index
+   parisc/index
+   ../powerpc/index
+   ../riscv/index
+   ../s390/index
+   sh/index
+   sparc/index
+   x86/index
+   xtensa/index
diff --git a/Documentation/m68k/buddha-driver.rst b/Documentation/arch/m68k/buddha-driver.rst
index 20e401413991..20e401413991 100644
--- a/Documentation/m68k/buddha-driver.rst
+++ b/Documentation/arch/m68k/buddha-driver.rst
diff --git a/Documentation/m68k/features.rst b/Documentation/arch/m68k/features.rst
index 5107a2119472..5107a2119472 100644
--- a/Documentation/m68k/features.rst
+++ b/Documentation/arch/m68k/features.rst
diff --git a/Documentation/m68k/index.rst b/Documentation/arch/m68k/index.rst
index 0f890dbb5fe2..0f890dbb5fe2 100644
--- a/Documentation/m68k/index.rst
+++ b/Documentation/arch/m68k/index.rst
diff --git a/Documentation/m68k/kernel-options.rst b/Documentation/arch/m68k/kernel-options.rst
index cabd9419740d..2008a20b4329 100644
--- a/Documentation/m68k/kernel-options.rst
+++ b/Documentation/arch/m68k/kernel-options.rst
@@ -367,8 +367,8 @@ activated by a "external:" sub-option.
 4.1.2) inverse
 --------------
 
-Invert the display. This affects both, text (consoles) and graphics
-(X) display. Usually, the background is chosen to be black. With this
+Invert the display. This affects only text consoles.
+Usually, the background is chosen to be black. With this
 option, you can make the background white.
 
 4.1.3) font
diff --git a/Documentation/nios2/features.rst b/Documentation/arch/nios2/features.rst
index 8449e63f69b2..8449e63f69b2 100644
--- a/Documentation/nios2/features.rst
+++ b/Documentation/arch/nios2/features.rst
diff --git a/Documentation/nios2/index.rst b/Documentation/arch/nios2/index.rst
index 4468fe1a1037..4468fe1a1037 100644
--- a/Documentation/nios2/index.rst
+++ b/Documentation/arch/nios2/index.rst
diff --git a/Documentation/nios2/nios2.rst b/Documentation/arch/nios2/nios2.rst
index 43da3f7cee76..43da3f7cee76 100644
--- a/Documentation/nios2/nios2.rst
+++ b/Documentation/arch/nios2/nios2.rst
diff --git a/Documentation/openrisc/features.rst b/Documentation/arch/openrisc/features.rst
index 3f7c40d219f2..3f7c40d219f2 100644
--- a/Documentation/openrisc/features.rst
+++ b/Documentation/arch/openrisc/features.rst
diff --git a/Documentation/openrisc/index.rst b/Documentation/arch/openrisc/index.rst
index 6879f998b87a..6879f998b87a 100644
--- a/Documentation/openrisc/index.rst
+++ b/Documentation/arch/openrisc/index.rst
diff --git a/Documentation/openrisc/openrisc_port.rst b/Documentation/arch/openrisc/openrisc_port.rst
index 657ac4af7be6..657ac4af7be6 100644
--- a/Documentation/openrisc/openrisc_port.rst
+++ b/Documentation/arch/openrisc/openrisc_port.rst
diff --git a/Documentation/openrisc/todo.rst b/Documentation/arch/openrisc/todo.rst
index 420b18b87eda..420b18b87eda 100644
--- a/Documentation/openrisc/todo.rst
+++ b/Documentation/arch/openrisc/todo.rst
diff --git a/Documentation/parisc/debugging.rst b/Documentation/arch/parisc/debugging.rst
index de1b60402c5b..de1b60402c5b 100644
--- a/Documentation/parisc/debugging.rst
+++ b/Documentation/arch/parisc/debugging.rst
diff --git a/Documentation/parisc/features.rst b/Documentation/arch/parisc/features.rst
index 501d7c450037..501d7c450037 100644
--- a/Documentation/parisc/features.rst
+++ b/Documentation/arch/parisc/features.rst
diff --git a/Documentation/parisc/index.rst b/Documentation/arch/parisc/index.rst
index 240685751825..240685751825 100644
--- a/Documentation/parisc/index.rst
+++ b/Documentation/arch/parisc/index.rst
diff --git a/Documentation/parisc/registers.rst b/Documentation/arch/parisc/registers.rst
index 59c8ecf3e856..59c8ecf3e856 100644
--- a/Documentation/parisc/registers.rst
+++ b/Documentation/arch/parisc/registers.rst
diff --git a/Documentation/sh/booting.rst b/Documentation/arch/sh/booting.rst
index d851c49a01bf..d851c49a01bf 100644
--- a/Documentation/sh/booting.rst
+++ b/Documentation/arch/sh/booting.rst
diff --git a/Documentation/sh/features.rst b/Documentation/arch/sh/features.rst
index f722af3b6c99..f722af3b6c99 100644
--- a/Documentation/sh/features.rst
+++ b/Documentation/arch/sh/features.rst
diff --git a/Documentation/sh/index.rst b/Documentation/arch/sh/index.rst
index c64776738cf6..c64776738cf6 100644
--- a/Documentation/sh/index.rst
+++ b/Documentation/arch/sh/index.rst
diff --git a/Documentation/sh/new-machine.rst b/Documentation/arch/sh/new-machine.rst
index e501c52b3b30..e501c52b3b30 100644
--- a/Documentation/sh/new-machine.rst
+++ b/Documentation/arch/sh/new-machine.rst
diff --git a/Documentation/sh/register-banks.rst b/Documentation/arch/sh/register-banks.rst
index 2bef5c8fcbbc..2bef5c8fcbbc 100644
--- a/Documentation/sh/register-banks.rst
+++ b/Documentation/arch/sh/register-banks.rst
diff --git a/Documentation/sparc/adi.rst b/Documentation/arch/sparc/adi.rst
index 857ad30f9569..dbcd8b6e7bc3 100644
--- a/Documentation/sparc/adi.rst
+++ b/Documentation/arch/sparc/adi.rst
@@ -38,7 +38,7 @@ virtual addresses that contain 0xa in bits 63-60.
 
 ADI is enabled on a set of pages using mprotect() with PROT_ADI flag.
 When ADI is enabled on a set of pages by a task for the first time,
-kernel sets the PSTATE.mcde bit fot the task. Version tags for memory
+kernel sets the PSTATE.mcde bit for the task. Version tags for memory
 addresses are set with an stxa instruction on the addresses using
 ASI_MCD_PRIMARY or ASI_MCD_ST_BLKINIT_PRIMARY. ADI block size is
 provided by the hypervisor to the kernel.  Kernel returns the value of
@@ -97,7 +97,7 @@ With ADI enabled, following new traps may occur:
 Disrupting memory corruption
 ----------------------------
 
-	When a store accesses a memory localtion that has TTE.mcd=1,
+	When a store accesses a memory location that has TTE.mcd=1,
 	the task is running with ADI enabled (PSTATE.mcde=1), and the ADI
 	tag in the address used (bits 63:60) does not match the tag set on
 	the corresponding cacheline, a memory corruption trap occurs. By
diff --git a/Documentation/sparc/console.rst b/Documentation/arch/sparc/console.rst
index 73132db83ece..73132db83ece 100644
--- a/Documentation/sparc/console.rst
+++ b/Documentation/arch/sparc/console.rst
diff --git a/Documentation/sparc/features.rst b/Documentation/arch/sparc/features.rst
index c0c92468b0fe..c0c92468b0fe 100644
--- a/Documentation/sparc/features.rst
+++ b/Documentation/arch/sparc/features.rst
diff --git a/Documentation/sparc/index.rst b/Documentation/arch/sparc/index.rst
index ae884224eec2..ae884224eec2 100644
--- a/Documentation/sparc/index.rst
+++ b/Documentation/arch/sparc/index.rst
diff --git a/Documentation/sparc/oradax/dax-hv-api.txt b/Documentation/arch/sparc/oradax/dax-hv-api.txt
index 73e8d506cf64..7ecd0bf4957b 100644
--- a/Documentation/sparc/oradax/dax-hv-api.txt
+++ b/Documentation/arch/sparc/oradax/dax-hv-api.txt
@@ -22,7 +22,7 @@ Chapter 36. Coprocessor services
         functionality offered may vary by virtual machine implementation.
 
         The DAX is a virtual device to sun4v guests, with supported data operations indicated by the virtual device
-        compatibilty property. Functionality is accessed through the submission of Command Control Blocks
+        compatibility property. Functionality is accessed through the submission of Command Control Blocks
         (CCBs) via the ccb_submit API function. The operations are processed asynchronously, with the status
         of the submitted operations reported through a Completion Area linked to each CCB. Each CCB has a
         separate Completion Area and, unless execution order is specifically restricted through the use of serial-
@@ -313,7 +313,7 @@ bits set, and terminate at a CCB that has the Conditional bit set, but not the P
 
           Secondary           Input Description
           Format Code
-          0                          Element is stored as value minus 1 (0 evalutes to 1, 1 evalutes
+          0                          Element is stored as value minus 1 (0 evaluates to 1, 1 evaluates
                                      to 2, etc)
           1                          Element is stored as value
 
@@ -659,7 +659,7 @@ Offset         Size            Field Description
                                             “Secondary Input Element Size”
                                [13:10]      Output Format (see Section 36.2.1.1.6, “Output Format”)
                                [9:5]        Operand size for first scan criteria value. In a scan value
-                                            operation, this is one of two potential extact match values.
+                                            operation, this is one of two potential exact match values.
                                             In a scan range operation, this is the size of the upper range
 
 
@@ -673,7 +673,7 @@ Offset   Size   Field Description
                              operand, minus 1. Values 0xF-0x1E are reserved. A value of
                              0x1F indicates this operand is not in use for this scan operation.
                 [4:0]        Operand size for second scan criteria value. In a scan value
-                             operation, this is one of two potential extact match values.
+                             operation, this is one of two potential exact match values.
                              In a scan range operation, this is the size of the lower range
                              boundary. The value of this field is the number of bytes in the
                              operand, minus 1. Values 0xF-0x1E are reserved. A value of
@@ -690,24 +690,24 @@ Offset   Size   Field Description
 48       8      Output (same fields as Primary Input)
 56       8      Symbol Table (if used by Primary Input). Same fields as Section 36.2.1.2,
                 “Extract command”
-64       4      Next 4 most significant bytes of first scan criteria operand occuring after the
+64       4      Next 4 most significant bytes of first scan criteria operand occurring after the
                 bytes specified at offset 40, if needed by the operand size. If first operand
                 is less than 8 bytes, the valid bytes are left-aligned to the lowest address.
-68       4      Next 4 most significant bytes of second scan criteria operand occuring after
+68       4      Next 4 most significant bytes of second scan criteria operand occurring after
                 the bytes specified at offset 44, if needed by the operand size. If second
                 operand is less than 8 bytes, the valid bytes are left-aligned to the lowest
                 address.
-72       4      Next 4 most significant bytes of first scan criteria operand occuring after the
+72       4      Next 4 most significant bytes of first scan criteria operand occurring after the
                 bytes specified at offset 64, if needed by the operand size. If first operand
                 is less than 12 bytes, the valid bytes are left-aligned to the lowest address.
-76       4      Next 4 most significant bytes of second scan criteria operand occuring after
+76       4      Next 4 most significant bytes of second scan criteria operand occurring after
                 the bytes specified at offset 68, if needed by the operand size. If second
                 operand is less than 12 bytes, the valid bytes are left-aligned to the lowest
                 address.
-80       4      Next 4 most significant bytes of first scan criteria operand occuring after the
+80       4      Next 4 most significant bytes of first scan criteria operand occurring after the
                 bytes specified at offset 72, if needed by the operand size. If first operand
                 is less than 16 bytes, the valid bytes are left-aligned to the lowest address.
-84       4      Next 4 most significant bytes of second scan criteria operand occuring after
+84       4      Next 4 most significant bytes of second scan criteria operand occurring after
                 the bytes specified at offset 76, if needed by the operand size. If second
                 operand is less than 16 bytes, the valid bytes are left-aligned to the lowest
                 address.
@@ -721,10 +721,10 @@ Offset   Size   Field Description
 
 36.2.1.4. Translate commands
 
-        The translate commands takes an input array of indicies, and a table of single bit values indexed by those
-        indicies, and outputs a bit vector or index array created by reading the tables bit value at each index in
+        The translate commands takes an input array of indices, and a table of single bit values indexed by those
+        indices, and outputs a bit vector or index array created by reading the tables bit value at each index in
         the input array. The output should therefore contain exactly one bit per index in the input data stream,
-        when outputing as a bit vector. When outputing as an index array, the number of elements depends on the
+        when outputting as a bit vector. When outputting as an index array, the number of elements depends on the
         values read in the bit table, but will always be less than, or equal to, the number of input elements. Only
         a restricted subset of the possible input format types are supported. No variable width or Huffman/OZIP
         encoded input streams are allowed. The primary input data element size must be 3 bytes or less.
@@ -742,7 +742,7 @@ Offset   Size   Field Description
         code in the CCB header.
 
         There are two supported formats for the output stream: the bit vector and index array formats (codes 0x8,
-        0xD, and 0xE). The index array format is an array of indicies of bits which would have been set if the
+        0xD, and 0xE). The index array format is an array of indices of bits which would have been set if the
         output format was a bit array.
 
         The return value of the CCB completion area contains the number of bits set in the output bit vector,
@@ -1254,7 +1254,7 @@ EUNAVAILABLE   The requested CCB operation could not be performed at this time.
                submitted CCB, or may apply to a larger scope. The status should not be
                interpreted as permanent, and the guest should attempt to submit CCBs in
                the future which had previously been unable to be performed. The status
-               data provides additional information about scope of the retricted availability
+               data provides additional information about scope of the restricted availability
                as follows:
                Value       Description
                0           Processing for the exact CCB instance submitted was unavailable,
@@ -1330,20 +1330,20 @@ EUNAVAILABLE   The requested CCB operation could not be performed at this time.
          of other CCBs ahead of the requested CCB, to provide a relative estimate of when the CCB may execute.
 
          The dax return value is only valid when the state is ENQUEUED. The value returned is the DAX unit
-         instance indentifier for the DAX unit processing the queue where the requested CCB is located. The value
+         instance identifier for the DAX unit processing the queue where the requested CCB is located. The value
          matches the value that would have been, or was, returned by ccb_submit using the queue info flag.
 
          The queue return value is only valid when the state is ENQUEUED. The value returned is the DAX
-         queue instance indentifier for the DAX unit processing the queue where the requested CCB is located. The
+         queue instance identifier for the DAX unit processing the queue where the requested CCB is located. The
          value matches the value that would have been, or was, returned by ccb_submit using the queue info flag.
 
 36.3.2.1. Errors
 
-          EOK                       The request was proccessed and the CCB state is valid.
+          EOK                       The request was processed and the CCB state is valid.
           EBADALIGN                 address is not on a 64-byte aligned.
           ENORADDR                  The real address provided for address is not valid.
           EINVAL                    The CCB completion area contents are not valid.
-          EWOULDBLOCK               Internal resource contraints prevented the CCB state from being queried at this
+          EWOULDBLOCK               Internal resource constraints prevented the CCB state from being queried at this
                                     time. The guest should retry the request.
           ENOACCESS                 The guest does not have permission to access the coprocessor virtual device
                                     functionality.
@@ -1401,11 +1401,11 @@ EUNAVAILABLE   The requested CCB operation could not be performed at this time.
 
 36.3.3.2. Errors
 
-          EOK                        The request was proccessed and the result is valid.
+          EOK                        The request was processed and the result is valid.
           EBADALIGN                  address is not on a 64-byte aligned.
           ENORADDR                   The real address provided for address is not valid.
           EINVAL                     The CCB completion area contents are not valid.
-          EWOULDBLOCK                Internal resource contraints prevented the CCB from being killed at this time.
+          EWOULDBLOCK                Internal resource constraints prevented the CCB from being killed at this time.
                                      The guest should retry the request.
           ENOACCESS                  The guest does not have permission to access the coprocessor virtual device
                                      functionality.
@@ -1423,7 +1423,7 @@ EUNAVAILABLE   The requested CCB operation could not be performed at this time.
 
 36.3.4.1. Errors
 
-          EOK                        The request was proccessed and the number of enabled/disabled DAX units
+          EOK                        The request was processed and the number of enabled/disabled DAX units
                                      are valid.
 
 
diff --git a/Documentation/sparc/oradax/oracle-dax.rst b/Documentation/arch/sparc/oradax/oracle-dax.rst
index d1e14d572918..d1e14d572918 100644
--- a/Documentation/sparc/oradax/oracle-dax.rst
+++ b/Documentation/arch/sparc/oradax/oracle-dax.rst
diff --git a/Documentation/arch/x86/amd-memory-encryption.rst b/Documentation/arch/x86/amd-memory-encryption.rst
new file mode 100644
index 000000000000..934310ce7258
--- /dev/null
+++ b/Documentation/arch/x86/amd-memory-encryption.rst
@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================
+AMD Memory Encryption
+=====================
+
+Secure Memory Encryption (SME) and Secure Encrypted Virtualization (SEV) are
+features found on AMD processors.
+
+SME provides the ability to mark individual pages of memory as encrypted using
+the standard x86 page tables.  A page that is marked encrypted will be
+automatically decrypted when read from DRAM and encrypted when written to
+DRAM.  SME can therefore be used to protect the contents of DRAM from physical
+attacks on the system.
+
+SEV enables running encrypted virtual machines (VMs) in which the code and data
+of the guest VM are secured so that a decrypted version is available only
+within the VM itself. SEV guest VMs have the concept of private and shared
+memory. Private memory is encrypted with the guest-specific key, while shared
+memory may be encrypted with hypervisor key. When SME is enabled, the hypervisor
+key is the same key which is used in SME.
+
+A page is encrypted when a page table entry has the encryption bit set (see
+below on how to determine its position).  The encryption bit can also be
+specified in the cr3 register, allowing the PGD table to be encrypted. Each
+successive level of page tables can also be encrypted by setting the encryption
+bit in the page table entry that points to the next table. This allows the full
+page table hierarchy to be encrypted. Note, this means that just because the
+encryption bit is set in cr3, doesn't imply the full hierarchy is encrypted.
+Each page table entry in the hierarchy needs to have the encryption bit set to
+achieve that. So, theoretically, you could have the encryption bit set in cr3
+so that the PGD is encrypted, but not set the encryption bit in the PGD entry
+for a PUD which results in the PUD pointed to by that entry to not be
+encrypted.
+
+When SEV is enabled, instruction pages and guest page tables are always treated
+as private. All the DMA operations inside the guest must be performed on shared
+memory. Since the memory encryption bit is controlled by the guest OS when it
+is operating in 64-bit or 32-bit PAE mode, in all other modes the SEV hardware
+forces the memory encryption bit to 1.
+
+Support for SME and SEV can be determined through the CPUID instruction. The
+CPUID function 0x8000001f reports information related to SME::
+
+	0x8000001f[eax]:
+		Bit[0] indicates support for SME
+		Bit[1] indicates support for SEV
+	0x8000001f[ebx]:
+		Bits[5:0]  pagetable bit number used to activate memory
+			   encryption
+		Bits[11:6] reduction in physical address space, in bits, when
+			   memory encryption is enabled (this only affects
+			   system physical addresses, not guest physical
+			   addresses)
+
+If support for SME is present, MSR 0xc00100010 (MSR_AMD64_SYSCFG) can be used to
+determine if SME is enabled and/or to enable memory encryption::
+
+	0xc0010010:
+		Bit[23]   0 = memory encryption features are disabled
+			  1 = memory encryption features are enabled
+
+If SEV is supported, MSR 0xc0010131 (MSR_AMD64_SEV) can be used to determine if
+SEV is active::
+
+	0xc0010131:
+		Bit[0]	  0 = memory encryption is not active
+			  1 = memory encryption is active
+
+Linux relies on BIOS to set this bit if BIOS has determined that the reduction
+in the physical address space as a result of enabling memory encryption (see
+CPUID information above) will not conflict with the address space resource
+requirements for the system.  If this bit is not set upon Linux startup then
+Linux itself will not set it and memory encryption will not be possible.
+
+The state of SME in the Linux kernel can be documented as follows:
+
+	- Supported:
+	  The CPU supports SME (determined through CPUID instruction).
+
+	- Enabled:
+	  Supported and bit 23 of MSR_AMD64_SYSCFG is set.
+
+	- Active:
+	  Supported, Enabled and the Linux kernel is actively applying
+	  the encryption bit to page table entries (the SME mask in the
+	  kernel is non-zero).
+
+SME can also be enabled and activated in the BIOS. If SME is enabled and
+activated in the BIOS, then all memory accesses will be encrypted and it will
+not be necessary to activate the Linux memory encryption support.  If the BIOS
+merely enables SME (sets bit 23 of the MSR_AMD64_SYSCFG), then Linux can activate
+memory encryption by default (CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT=y) or
+by supplying mem_encrypt=on on the kernel command line.  However, if BIOS does
+not enable SME, then Linux will not be able to activate memory encryption, even
+if configured to do so by default or the mem_encrypt=on command line parameter
+is specified.
+
+Secure Nested Paging (SNP)
+==========================
+
+SEV-SNP introduces new features (SEV_FEATURES[1:63]) which can be enabled
+by the hypervisor for security enhancements. Some of these features need
+guest side implementation to function correctly. The below table lists the
+expected guest behavior with various possible scenarios of guest/hypervisor
+SNP feature support.
+
++-----------------+---------------+---------------+------------------+
+| Feature Enabled | Guest needs   | Guest has     | Guest boot       |
+| by the HV       | implementation| implementation| behaviour        |
++=================+===============+===============+==================+
+|      No         |      No       |      No       |     Boot         |
+|                 |               |               |                  |
++-----------------+---------------+---------------+------------------+
+|      No         |      Yes      |      No       |     Boot         |
+|                 |               |               |                  |
++-----------------+---------------+---------------+------------------+
+|      No         |      Yes      |      Yes      |     Boot         |
+|                 |               |               |                  |
++-----------------+---------------+---------------+------------------+
+|      Yes        |      No       |      No       | Boot with        |
+|                 |               |               | feature enabled  |
++-----------------+---------------+---------------+------------------+
+|      Yes        |      Yes      |      No       | Graceful boot    |
+|                 |               |               | failure          |
++-----------------+---------------+---------------+------------------+
+|      Yes        |      Yes      |      Yes      | Boot with        |
+|                 |               |               | feature enabled  |
++-----------------+---------------+---------------+------------------+
+
+More details in AMD64 APM[1] Vol 2: 15.34.10 SEV_STATUS MSR
+
+[1] https://www.amd.com/system/files/TechDocs/40332.pdf
diff --git a/Documentation/arch/x86/amd_hsmp.rst b/Documentation/arch/x86/amd_hsmp.rst
new file mode 100644
index 000000000000..440e4b645a1c
--- /dev/null
+++ b/Documentation/arch/x86/amd_hsmp.rst
@@ -0,0 +1,86 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================
+AMD HSMP interface
+============================================
+
+Newer Fam19h EPYC server line of processors from AMD support system
+management functionality via HSMP (Host System Management Port).
+
+The Host System Management Port (HSMP) is an interface to provide
+OS-level software with access to system management functions via a
+set of mailbox registers.
+
+More details on the interface can be found in chapter
+"7 Host System Management Port (HSMP)" of the family/model PPR
+Eg: https://www.amd.com/system/files/TechDocs/55898_B1_pub_0.50.zip
+
+HSMP interface is supported on EPYC server CPU models only.
+
+
+HSMP device
+============================================
+
+amd_hsmp driver under the drivers/platforms/x86/ creates miscdevice
+/dev/hsmp to let user space programs run hsmp mailbox commands.
+
+$ ls -al /dev/hsmp
+crw-r--r-- 1 root root 10, 123 Jan 21 21:41 /dev/hsmp
+
+Characteristics of the dev node:
+ * Write mode is used for running set/configure commands
+ * Read mode is used for running get/status monitor commands
+
+Access restrictions:
+ * Only root user is allowed to open the file in write mode.
+ * The file can be opened in read mode by all the users.
+
+In-kernel integration:
+ * Other subsystems in the kernel can use the exported transport
+   function hsmp_send_message().
+ * Locking across callers is taken care by the driver.
+
+
+An example
+==========
+
+To access hsmp device from a C program.
+First, you need to include the headers::
+
+  #include <linux/amd_hsmp.h>
+
+Which defines the supported messages/message IDs.
+
+Next thing, open the device file, as follows::
+
+  int file;
+
+  file = open("/dev/hsmp", O_RDWR);
+  if (file < 0) {
+    /* ERROR HANDLING; you can check errno to see what went wrong */
+    exit(1);
+  }
+
+The following IOCTL is defined:
+
+``ioctl(file, HSMP_IOCTL_CMD, struct hsmp_message *msg)``
+  The argument is a pointer to a::
+
+    struct hsmp_message {
+    	__u32	msg_id;				/* Message ID */
+    	__u16	num_args;			/* Number of input argument words in message */
+    	__u16	response_sz;			/* Number of expected output/response words */
+    	__u32	args[HSMP_MAX_MSG_LEN];		/* argument/response buffer */
+    	__u16	sock_ind;			/* socket number */
+    };
+
+The ioctl would return a non-zero on failure; you can read errno to see
+what happened. The transaction returns 0 on success.
+
+More details on the interface and message definitions can be found in chapter
+"7 Host System Management Port (HSMP)" of the respective family/model PPR
+eg: https://www.amd.com/system/files/TechDocs/55898_B1_pub_0.50.zip
+
+User space C-APIs are made available by linking against the esmi library,
+which is provided by the E-SMS project https://developer.amd.com/e-sms/.
+See: https://github.com/amd/esmi_ib_library
diff --git a/Documentation/x86/boot.rst b/Documentation/arch/x86/boot.rst
index 894a19897005..33520ecdb37a 100644
--- a/Documentation/x86/boot.rst
+++ b/Documentation/arch/x86/boot.rst
@@ -455,6 +455,7 @@ Protocol:	2.00+
 	11 Minimal Linux Bootloader
 	   <http://sebastian-plotz.blogspot.de>
 	12 OVMF UEFI virtualization stack
+	13 barebox
 	== =======================================
 
   Please contact <hpa@zytor.com> if you need a bootloader ID value assigned.
@@ -1343,7 +1344,7 @@ follow::
 In addition to read/modify/write the setup header of the struct
 boot_params as that of 16-bit boot protocol, the boot loader should
 also fill the additional fields of the struct boot_params as
-described in chapter Documentation/x86/zero-page.rst.
+described in chapter Documentation/arch/x86/zero-page.rst.
 
 After setting up the struct boot_params, the boot loader can load the
 32/64-bit kernel in the same way as that of 16-bit boot protocol.
@@ -1379,7 +1380,7 @@ can be calculated as follows::
 In addition to read/modify/write the setup header of the struct
 boot_params as that of 16-bit boot protocol, the boot loader should
 also fill the additional fields of the struct boot_params as described
-in chapter Documentation/x86/zero-page.rst.
+in chapter Documentation/arch/x86/zero-page.rst.
 
 After setting up the struct boot_params, the boot loader can load
 64-bit kernel in the same way as that of 16-bit boot protocol, but
diff --git a/Documentation/x86/booting-dt.rst b/Documentation/arch/x86/booting-dt.rst
index 965a374071ab..b089ffd56e6e 100644
--- a/Documentation/x86/booting-dt.rst
+++ b/Documentation/arch/x86/booting-dt.rst
@@ -7,7 +7,7 @@ DeviceTree Booting
   the decompressor (the real mode entry point goes to the same  32bit
   entry point once it switched into protected mode). That entry point
   supports one calling convention which is documented in
-  Documentation/x86/boot.rst
+  Documentation/arch/x86/boot.rst
   The physical pointer to the device-tree block is passed via setup_data
   which requires at least boot protocol 2.09.
   The type filed is defined as
diff --git a/Documentation/x86/buslock.rst b/Documentation/arch/x86/buslock.rst
index 7c051e714943..31ec0ef78086 100644
--- a/Documentation/x86/buslock.rst
+++ b/Documentation/arch/x86/buslock.rst
@@ -53,8 +53,14 @@ parameter "split_lock_detect". Here is a summary of different options:
 |off	  	   |Do nothing			|Do nothing		|
 +------------------+----------------------------+-----------------------+
 |warn		   |Kernel OOPs			|Warn once per task and |
-|(default)	   |Warn once per task and	|and continues to run.  |
-|		   |disable future checking	|			|
+|(default)	   |Warn once per task, add a	|and continues to run.  |
+|		   |delay, add synchronization	|			|
+|		   |to prevent more than one	|			|
+|		   |core from executing a	|			|
+|		   |split lock in parallel.	|			|
+|		   |sysctl split_lock_mitigate	|			|
+|		   |can be used to avoid the	|			|
+|		   |delay and synchronization	|			|
 |		   |When both features are	|			|
 |		   |supported, warn in #AC	|			|
 +------------------+----------------------------+-----------------------+
diff --git a/Documentation/x86/cpuinfo.rst b/Documentation/arch/x86/cpuinfo.rst
index 5d54c39a063f..08246e8ac835 100644
--- a/Documentation/x86/cpuinfo.rst
+++ b/Documentation/arch/x86/cpuinfo.rst
@@ -140,9 +140,8 @@ from #define X86_FEATURE_UMIP (16*32 + 2).
 
 In addition, there exists a variety of custom command-line parameters that
 disable specific features. The list of parameters includes, but is not limited
-to, nofsgsbase, nosmap, and nosmep. 5-level paging can also be disabled using
-"no5lvl". SMAP and SMEP are disabled with the aforementioned parameters,
-respectively.
+to, nofsgsbase, nosgx, noxsave, etc. 5-level paging can also be disabled using
+"no5lvl".
 
 e: The feature was known to be non-functional.
 ----------------------------------------------
diff --git a/Documentation/x86/earlyprintk.rst b/Documentation/arch/x86/earlyprintk.rst
index 51ef11e8f725..51ef11e8f725 100644
--- a/Documentation/x86/earlyprintk.rst
+++ b/Documentation/arch/x86/earlyprintk.rst
diff --git a/Documentation/x86/elf_auxvec.rst b/Documentation/arch/x86/elf_auxvec.rst
index 18e4744717f9..18e4744717f9 100644
--- a/Documentation/x86/elf_auxvec.rst
+++ b/Documentation/arch/x86/elf_auxvec.rst
diff --git a/Documentation/x86/entry_64.rst b/Documentation/arch/x86/entry_64.rst
index a48b3f6ebbe8..0afdce3c06f4 100644
--- a/Documentation/x86/entry_64.rst
+++ b/Documentation/arch/x86/entry_64.rst
@@ -8,7 +8,7 @@ This file documents some of the kernel entries in
 arch/x86/entry/entry_64.S.  A lot of this explanation is adapted from
 an email from Ingo Molnar:
 
-http://lkml.kernel.org/r/<20110529191055.GC9835%40elte.hu>
+https://lore.kernel.org/r/20110529191055.GC9835%40elte.hu
 
 The x86 architecture has quite a few different ways to jump into
 kernel code.  Most of these entry points are registered in
@@ -33,8 +33,8 @@ Some of these entries are:
  - interrupt: An array of entries.  Every IDT vector that doesn't
    explicitly point somewhere else gets set to the corresponding
    value in interrupts.  These point to a whole array of
-   magically-generated functions that make their way to do_IRQ with
-   the interrupt number as a parameter.
+   magically-generated functions that make their way to common_interrupt()
+   with the interrupt number as a parameter.
 
  - APIC interrupts: Various special-purpose interrupts for things
    like TLB shootdown.
diff --git a/Documentation/x86/exception-tables.rst b/Documentation/arch/x86/exception-tables.rst
index de58110c5ffd..efde1fef4fbd 100644
--- a/Documentation/x86/exception-tables.rst
+++ b/Documentation/arch/x86/exception-tables.rst
@@ -32,14 +32,14 @@ Whenever the kernel tries to access an address that is currently not
 accessible, the CPU generates a page fault exception and calls the
 page fault handler::
 
-  void do_page_fault(struct pt_regs *regs, unsigned long error_code)
+  void exc_page_fault(struct pt_regs *regs, unsigned long error_code)
 
 in arch/x86/mm/fault.c. The parameters on the stack are set up by
 the low level assembly glue in arch/x86/entry/entry_32.S. The parameter
 regs is a pointer to the saved registers on the stack, error_code
 contains a reason code for the exception.
 
-do_page_fault first obtains the unaccessible address from the CPU
+exc_page_fault() first obtains the inaccessible address from the CPU
 control register CR2. If the address is within the virtual address
 space of the process, the fault probably occurred, because the page
 was not swapped in, write protected or something similar. However,
@@ -57,10 +57,10 @@ Where does fixup point to?
 
 Since we jump to the contents of fixup, fixup obviously points
 to executable code. This code is hidden inside the user access macros.
-I have picked the get_user macro defined in arch/x86/include/asm/uaccess.h
+I have picked the get_user() macro defined in arch/x86/include/asm/uaccess.h
 as an example. The definition is somewhat hard to follow, so let's peek at
 the code generated by the preprocessor and the compiler. I selected
-the get_user call in drivers/char/sysrq.c for a detailed examination.
+the get_user() call in drivers/char/sysrq.c for a detailed examination.
 
 The original code in sysrq.c line 587::
 
@@ -281,12 +281,15 @@ vma occurs?
 
     > c017e7a5 <do_con_write+e1> movb   (%ebx),%dl
 #. MMU generates exception
-#. CPU calls do_page_fault
-#. do page fault calls search_exception_table (regs->eip == c017e7a5);
-#. search_exception_table looks up the address c017e7a5 in the
+#. CPU calls exc_page_fault()
+#. exc_page_fault() calls do_user_addr_fault()
+#. do_user_addr_fault() calls kernelmode_fixup_or_oops()
+#. kernelmode_fixup_or_oops() calls fixup_exception() (regs->eip == c017e7a5);
+#. fixup_exception() calls search_exception_tables()
+#. search_exception_tables() looks up the address c017e7a5 in the
    exception table (i.e. the contents of the ELF section __ex_table)
    and returns the address of the associated fault handle code c0199ff5.
-#. do_page_fault modifies its own return address to point to the fault
+#. fixup_exception() modifies its own return address to point to the fault
    handle code and returns.
 #. execution continues in the fault handling code.
 #. a) EAX becomes -EFAULT (== -14)
@@ -298,9 +301,9 @@ The steps 8a to 8c in a certain way emulate the faulting instruction.
 
 That's it, mostly. If you look at our example, you might ask why
 we set EAX to -EFAULT in the exception handler code. Well, the
-get_user macro actually returns a value: 0, if the user access was
+get_user() macro actually returns a value: 0, if the user access was
 successful, -EFAULT on failure. Our original code did not test this
-return value, however the inline assembly code in get_user tries to
+return value, however the inline assembly code in get_user() tries to
 return -EFAULT. GCC selected EAX to return this value.
 
 NOTE:
diff --git a/Documentation/x86/features.rst b/Documentation/arch/x86/features.rst
index b663f15053ce..b663f15053ce 100644
--- a/Documentation/x86/features.rst
+++ b/Documentation/arch/x86/features.rst
diff --git a/Documentation/x86/i386/IO-APIC.rst b/Documentation/arch/x86/i386/IO-APIC.rst
index ce4d8df15e7c..ce4d8df15e7c 100644
--- a/Documentation/x86/i386/IO-APIC.rst
+++ b/Documentation/arch/x86/i386/IO-APIC.rst
diff --git a/Documentation/x86/i386/index.rst b/Documentation/arch/x86/i386/index.rst
index 8747cf5bbd49..8747cf5bbd49 100644
--- a/Documentation/x86/i386/index.rst
+++ b/Documentation/arch/x86/i386/index.rst
diff --git a/Documentation/arch/x86/ifs.rst b/Documentation/arch/x86/ifs.rst
new file mode 100644
index 000000000000..97abb696a680
--- /dev/null
+++ b/Documentation/arch/x86/ifs.rst
@@ -0,0 +1,2 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. kernel-doc:: drivers/platform/x86/intel/ifs/ifs.h
diff --git a/Documentation/arch/x86/index.rst b/Documentation/arch/x86/index.rst
new file mode 100644
index 000000000000..c73d133fd37c
--- /dev/null
+++ b/Documentation/arch/x86/index.rst
@@ -0,0 +1,44 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+x86-specific Documentation
+==========================
+
+.. toctree::
+   :maxdepth: 2
+   :numbered:
+
+   boot
+   booting-dt
+   cpuinfo
+   topology
+   exception-tables
+   kernel-stacks
+   entry_64
+   earlyprintk
+   orc-unwinder
+   zero-page
+   tlb
+   mtrr
+   pat
+   intel-hfi
+   iommu
+   intel_txt
+   amd-memory-encryption
+   amd_hsmp
+   tdx
+   pti
+   mds
+   microcode
+   resctrl
+   tsx_async_abort
+   buslock
+   usb-legacy-support
+   i386/index
+   x86_64/index
+   ifs
+   sva
+   sgx
+   features
+   elf_auxvec
+   xstate
diff --git a/Documentation/arch/x86/intel-hfi.rst b/Documentation/arch/x86/intel-hfi.rst
new file mode 100644
index 000000000000..49dea58ea4fb
--- /dev/null
+++ b/Documentation/arch/x86/intel-hfi.rst
@@ -0,0 +1,72 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================================
+Hardware-Feedback Interface for scheduling on Intel Hardware
+============================================================
+
+Overview
+--------
+
+Intel has described the Hardware Feedback Interface (HFI) in the Intel 64 and
+IA-32 Architectures Software Developer's Manual (Intel SDM) Volume 3 Section
+14.6 [1]_.
+
+The HFI gives the operating system a performance and energy efficiency
+capability data for each CPU in the system. Linux can use the information from
+the HFI to influence task placement decisions.
+
+The Hardware Feedback Interface
+-------------------------------
+
+The Hardware Feedback Interface provides to the operating system information
+about the performance and energy efficiency of each CPU in the system. Each
+capability is given as a unit-less quantity in the range [0-255]. Higher values
+indicate higher capability. Energy efficiency and performance are reported in
+separate capabilities. Even though on some systems these two metrics may be
+related, they are specified as independent capabilities in the Intel SDM.
+
+These capabilities may change at runtime as a result of changes in the
+operating conditions of the system or the action of external factors. The rate
+at which these capabilities are updated is specific to each processor model. On
+some models, capabilities are set at boot time and never change. On others,
+capabilities may change every tens of milliseconds. For instance, a remote
+mechanism may be used to lower Thermal Design Power. Such change can be
+reflected in the HFI. Likewise, if the system needs to be throttled due to
+excessive heat, the HFI may reflect reduced performance on specific CPUs.
+
+The kernel or a userspace policy daemon can use these capabilities to modify
+task placement decisions. For instance, if either the performance or energy
+capabilities of a given logical processor becomes zero, it is an indication that
+the hardware recommends to the operating system to not schedule any tasks on
+that processor for performance or energy efficiency reasons, respectively.
+
+Implementation details for Linux
+--------------------------------
+
+The infrastructure to handle thermal event interrupts has two parts. In the
+Local Vector Table of a CPU's local APIC, there exists a register for the
+Thermal Monitor Register. This register controls how interrupts are delivered
+to a CPU when the thermal monitor generates and interrupt. Further details
+can be found in the Intel SDM Vol. 3 Section 10.5 [1]_.
+
+The thermal monitor may generate interrupts per CPU or per package. The HFI
+generates package-level interrupts. This monitor is configured and initialized
+via a set of machine-specific registers. Specifically, the HFI interrupt and
+status are controlled via designated bits in the IA32_PACKAGE_THERM_INTERRUPT
+and IA32_PACKAGE_THERM_STATUS registers, respectively. There exists one HFI
+table per package. Further details can be found in the Intel SDM Vol. 3
+Section 14.9 [1]_.
+
+The hardware issues an HFI interrupt after updating the HFI table and is ready
+for the operating system to consume it. CPUs receive such interrupt via the
+thermal entry in the Local APIC's Local Vector Table.
+
+When servicing such interrupt, the HFI driver parses the updated table and
+relays the update to userspace using the thermal notification framework. Given
+that there may be many HFI updates every second, the updates relayed to
+userspace are throttled at a rate of CONFIG_HZ jiffies.
+
+References
+----------
+
+.. [1] https://www.intel.com/sdm
diff --git a/Documentation/x86/intel_txt.rst b/Documentation/arch/x86/intel_txt.rst
index d83c1a2122c9..d83c1a2122c9 100644
--- a/Documentation/x86/intel_txt.rst
+++ b/Documentation/arch/x86/intel_txt.rst
diff --git a/Documentation/arch/x86/iommu.rst b/Documentation/arch/x86/iommu.rst
new file mode 100644
index 000000000000..42c7a6faa39a
--- /dev/null
+++ b/Documentation/arch/x86/iommu.rst
@@ -0,0 +1,151 @@
+=================
+x86 IOMMU Support
+=================
+
+The architecture specs can be obtained from the below locations.
+
+- Intel: http://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/vt-directed-io-spec.pdf
+- AMD: https://www.amd.com/system/files/TechDocs/48882_IOMMU.pdf
+
+This guide gives a quick cheat sheet for some basic understanding.
+
+Basic stuff
+-----------
+
+ACPI enumerates and lists the different IOMMUs on the platform, and
+device scope relationships between devices and which IOMMU controls
+them.
+
+Some ACPI Keywords:
+
+- DMAR - Intel DMA Remapping table
+- DRHD - Intel DMA Remapping Hardware Unit Definition
+- RMRR - Intel Reserved Memory Region Reporting Structure
+- IVRS - AMD I/O Virtualization Reporting Structure
+- IVDB - AMD I/O Virtualization Definition Block
+- IVHD - AMD I/O Virtualization Hardware Definition
+
+What is Intel RMRR?
+^^^^^^^^^^^^^^^^^^^
+
+There are some devices the BIOS controls, for e.g USB devices to perform
+PS2 emulation. The regions of memory used for these devices are marked
+reserved in the e820 map. When we turn on DMA translation, DMA to those
+regions will fail. Hence BIOS uses RMRR to specify these regions along with
+devices that need to access these regions. OS is expected to setup
+unity mappings for these regions for these devices to access these regions.
+
+What is AMD IVRS?
+^^^^^^^^^^^^^^^^^
+
+The architecture defines an ACPI-compatible data structure called an I/O
+Virtualization Reporting Structure (IVRS) that is used to convey information
+related to I/O virtualization to system software.  The IVRS describes the
+configuration and capabilities of the IOMMUs contained in the platform as
+well as information about the devices that each IOMMU virtualizes.
+
+The IVRS provides information about the following:
+
+- IOMMUs present in the platform including their capabilities and proper configuration
+- System I/O topology relevant to each IOMMU
+- Peripheral devices that cannot be otherwise enumerated
+- Memory regions used by SMI/SMM, platform firmware, and platform hardware. These are generally exclusion ranges to be configured by system software.
+
+How is an I/O Virtual Address (IOVA) generated?
+-----------------------------------------------
+
+Well behaved drivers call dma_map_*() calls before sending command to device
+that needs to perform DMA. Once DMA is completed and mapping is no longer
+required, driver performs dma_unmap_*() calls to unmap the region.
+
+Intel Specific Notes
+--------------------
+
+Graphics Problems?
+^^^^^^^^^^^^^^^^^^
+
+If you encounter issues with graphics devices, you can try adding
+option intel_iommu=igfx_off to turn off the integrated graphics engine.
+If this fixes anything, please ensure you file a bug reporting the problem.
+
+Some exceptions to IOVA
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Interrupt ranges are not address translated, (0xfee00000 - 0xfeefffff).
+The same is true for peer to peer transactions. Hence we reserve the
+address from PCI MMIO ranges so they are not allocated for IOVA addresses.
+
+AMD Specific Notes
+------------------
+
+Graphics Problems?
+^^^^^^^^^^^^^^^^^^
+
+If you encounter issues with integrated graphics devices, you can try adding
+option iommu=pt to the kernel command line use a 1:1 mapping for the IOMMU.  If
+this fixes anything, please ensure you file a bug reporting the problem.
+
+Fault reporting
+---------------
+When errors are reported, the IOMMU signals via an interrupt. The fault
+reason and device that caused it is printed on the console.
+
+
+Kernel Log Samples
+------------------
+
+Intel Boot Messages
+^^^^^^^^^^^^^^^^^^^
+
+Something like this gets printed indicating presence of DMAR tables
+in ACPI:
+
+::
+
+	ACPI: DMAR (v001 A M I  OEMDMAR  0x00000001 MSFT 0x00000097) @ 0x000000007f5b5ef0
+
+When DMAR is being processed and initialized by ACPI, prints DMAR locations
+and any RMRR's processed:
+
+::
+
+	ACPI DMAR:Host address width 36
+	ACPI DMAR:DRHD (flags: 0x00000000)base: 0x00000000fed90000
+	ACPI DMAR:DRHD (flags: 0x00000000)base: 0x00000000fed91000
+	ACPI DMAR:DRHD (flags: 0x00000001)base: 0x00000000fed93000
+	ACPI DMAR:RMRR base: 0x00000000000ed000 end: 0x00000000000effff
+	ACPI DMAR:RMRR base: 0x000000007f600000 end: 0x000000007fffffff
+
+When DMAR is enabled for use, you will notice:
+
+::
+
+	PCI-DMA: Using DMAR IOMMU
+
+Intel Fault reporting
+^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+	DMAR:[DMA Write] Request device [00:02.0] fault addr 6df084000
+	DMAR:[fault reason 05] PTE Write access is not set
+	DMAR:[DMA Write] Request device [00:02.0] fault addr 6df084000
+	DMAR:[fault reason 05] PTE Write access is not set
+
+AMD Boot Messages
+^^^^^^^^^^^^^^^^^
+
+Something like this gets printed indicating presence of the IOMMU:
+
+::
+
+	iommu: Default domain type: Translated
+	iommu: DMA domain TLB invalidation policy: lazy mode
+
+AMD Fault reporting
+^^^^^^^^^^^^^^^^^^^
+
+::
+
+	AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0007 address=0xffffc02000 flags=0x0000]
+	AMD-Vi: Event logged [IO_PAGE_FAULT device=07:00.0 domain=0x0007 address=0xffffc02000 flags=0x0000]
diff --git a/Documentation/x86/kernel-stacks.rst b/Documentation/arch/x86/kernel-stacks.rst
index 6b0bcf027ff1..738671a4070b 100644
--- a/Documentation/x86/kernel-stacks.rst
+++ b/Documentation/arch/x86/kernel-stacks.rst
@@ -12,7 +12,7 @@ Most of the text from Keith Owens, hacked by AK
 x86_64 page size (PAGE_SIZE) is 4K.
 
 Like all other architectures, x86_64 has a kernel stack for every
-active thread.  These thread stacks are THREAD_SIZE (2*PAGE_SIZE) big.
+active thread.  These thread stacks are THREAD_SIZE (4*PAGE_SIZE) big.
 These stacks contain useful data as long as a thread is alive or a
 zombie. While the thread is in user space the kernel stack is empty
 except for the thread_info structure at the bottom.
diff --git a/Documentation/x86/mds.rst b/Documentation/arch/x86/mds.rst
index 5d4330be200f..5d4330be200f 100644
--- a/Documentation/x86/mds.rst
+++ b/Documentation/arch/x86/mds.rst
diff --git a/Documentation/arch/x86/microcode.rst b/Documentation/arch/x86/microcode.rst
new file mode 100644
index 000000000000..b627c6f36bcf
--- /dev/null
+++ b/Documentation/arch/x86/microcode.rst
@@ -0,0 +1,240 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+The Linux Microcode Loader
+==========================
+
+:Authors: - Fenghua Yu <fenghua.yu@intel.com>
+          - Borislav Petkov <bp@suse.de>
+	  - Ashok Raj <ashok.raj@intel.com>
+
+The kernel has a x86 microcode loading facility which is supposed to
+provide microcode loading methods in the OS. Potential use cases are
+updating the microcode on platforms beyond the OEM End-Of-Life support,
+and updating the microcode on long-running systems without rebooting.
+
+The loader supports three loading methods:
+
+Early load microcode
+====================
+
+The kernel can update microcode very early during boot. Loading
+microcode early can fix CPU issues before they are observed during
+kernel boot time.
+
+The microcode is stored in an initrd file. During boot, it is read from
+it and loaded into the CPU cores.
+
+The format of the combined initrd image is microcode in (uncompressed)
+cpio format followed by the (possibly compressed) initrd image. The
+loader parses the combined initrd image during boot.
+
+The microcode files in cpio name space are:
+
+on Intel:
+  kernel/x86/microcode/GenuineIntel.bin
+on AMD  :
+  kernel/x86/microcode/AuthenticAMD.bin
+
+During BSP (BootStrapping Processor) boot (pre-SMP), the kernel
+scans the microcode file in the initrd. If microcode matching the
+CPU is found, it will be applied in the BSP and later on in all APs
+(Application Processors).
+
+The loader also saves the matching microcode for the CPU in memory.
+Thus, the cached microcode patch is applied when CPUs resume from a
+sleep state.
+
+Here's a crude example how to prepare an initrd with microcode (this is
+normally done automatically by the distribution, when recreating the
+initrd, so you don't really have to do it yourself. It is documented
+here for future reference only).
+::
+
+  #!/bin/bash
+
+  if [ -z "$1" ]; then
+      echo "You need to supply an initrd file"
+      exit 1
+  fi
+
+  INITRD="$1"
+
+  DSTDIR=kernel/x86/microcode
+  TMPDIR=/tmp/initrd
+
+  rm -rf $TMPDIR
+
+  mkdir $TMPDIR
+  cd $TMPDIR
+  mkdir -p $DSTDIR
+
+  if [ -d /lib/firmware/amd-ucode ]; then
+          cat /lib/firmware/amd-ucode/microcode_amd*.bin > $DSTDIR/AuthenticAMD.bin
+  fi
+
+  if [ -d /lib/firmware/intel-ucode ]; then
+          cat /lib/firmware/intel-ucode/* > $DSTDIR/GenuineIntel.bin
+  fi
+
+  find . | cpio -o -H newc >../ucode.cpio
+  cd ..
+  mv $INITRD $INITRD.orig
+  cat ucode.cpio $INITRD.orig > $INITRD
+
+  rm -rf $TMPDIR
+
+
+The system needs to have the microcode packages installed into
+/lib/firmware or you need to fixup the paths above if yours are
+somewhere else and/or you've downloaded them directly from the processor
+vendor's site.
+
+Late loading
+============
+
+You simply install the microcode packages your distro supplies and
+run::
+
+  # echo 1 > /sys/devices/system/cpu/microcode/reload
+
+as root.
+
+The loading mechanism looks for microcode blobs in
+/lib/firmware/{intel-ucode,amd-ucode}. The default distro installation
+packages already put them there.
+
+Since kernel 5.19, late loading is not enabled by default.
+
+The /dev/cpu/microcode method has been removed in 5.19.
+
+Why is late loading dangerous?
+==============================
+
+Synchronizing all CPUs
+----------------------
+
+The microcode engine which receives the microcode update is shared
+between the two logical threads in a SMT system. Therefore, when
+the update is executed on one SMT thread of the core, the sibling
+"automatically" gets the update.
+
+Since the microcode can "simulate" MSRs too, while the microcode update
+is in progress, those simulated MSRs transiently cease to exist. This
+can result in unpredictable results if the SMT sibling thread happens to
+be in the middle of an access to such an MSR. The usual observation is
+that such MSR accesses cause #GPs to be raised to signal that former are
+not present.
+
+The disappearing MSRs are just one common issue which is being observed.
+Any other instruction that's being patched and gets concurrently
+executed by the other SMT sibling, can also result in similar,
+unpredictable behavior.
+
+To eliminate this case, a stop_machine()-based CPU synchronization was
+introduced as a way to guarantee that all logical CPUs will not execute
+any code but just wait in a spin loop, polling an atomic variable.
+
+While this took care of device or external interrupts, IPIs including
+LVT ones, such as CMCI etc, it cannot address other special interrupts
+that can't be shut off. Those are Machine Check (#MC), System Management
+(#SMI) and Non-Maskable interrupts (#NMI).
+
+Machine Checks
+--------------
+
+Machine Checks (#MC) are non-maskable. There are two kinds of MCEs.
+Fatal un-recoverable MCEs and recoverable MCEs. While un-recoverable
+errors are fatal, recoverable errors can also happen in kernel context
+are also treated as fatal by the kernel.
+
+On certain Intel machines, MCEs are also broadcast to all threads in a
+system. If one thread is in the middle of executing WRMSR, a MCE will be
+taken at the end of the flow. Either way, they will wait for the thread
+performing the wrmsr(0x79) to rendezvous in the MCE handler and shutdown
+eventually if any of the threads in the system fail to check in to the
+MCE rendezvous.
+
+To be paranoid and get predictable behavior, the OS can choose to set
+MCG_STATUS.MCIP. Since MCEs can be at most one in a system, if an
+MCE was signaled, the above condition will promote to a system reset
+automatically. OS can turn off MCIP at the end of the update for that
+core.
+
+System Management Interrupt
+---------------------------
+
+SMIs are also broadcast to all CPUs in the platform. Microcode update
+requests exclusive access to the core before writing to MSR 0x79. So if
+it does happen such that, one thread is in WRMSR flow, and the 2nd got
+an SMI, that thread will be stopped in the first instruction in the SMI
+handler.
+
+Since the secondary thread is stopped in the first instruction in SMI,
+there is very little chance that it would be in the middle of executing
+an instruction being patched. Plus OS has no way to stop SMIs from
+happening.
+
+Non-Maskable Interrupts
+-----------------------
+
+When thread0 of a core is doing the microcode update, if thread1 is
+pulled into NMI, that can cause unpredictable behavior due to the
+reasons above.
+
+OS can choose a variety of methods to avoid running into this situation.
+
+
+Is the microcode suitable for late loading?
+-------------------------------------------
+
+Late loading is done when the system is fully operational and running
+real workloads. Late loading behavior depends on what the base patch on
+the CPU is before upgrading to the new patch.
+
+This is true for Intel CPUs.
+
+Consider, for example, a CPU has patch level 1 and the update is to
+patch level 3.
+
+Between patch1 and patch3, patch2 might have deprecated a software-visible
+feature.
+
+This is unacceptable if software is even potentially using that feature.
+For instance, say MSR_X is no longer available after an update,
+accessing that MSR will cause a #GP fault.
+
+Basically there is no way to declare a new microcode update suitable
+for late-loading. This is another one of the problems that caused late
+loading to be not enabled by default.
+
+Builtin microcode
+=================
+
+The loader supports also loading of a builtin microcode supplied through
+the regular builtin firmware method CONFIG_EXTRA_FIRMWARE. Only 64-bit is
+currently supported.
+
+Here's an example::
+
+  CONFIG_EXTRA_FIRMWARE="intel-ucode/06-3a-09 amd-ucode/microcode_amd_fam15h.bin"
+  CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
+
+This basically means, you have the following tree structure locally::
+
+  /lib/firmware/
+  |-- amd-ucode
+  ...
+  |   |-- microcode_amd_fam15h.bin
+  ...
+  |-- intel-ucode
+  ...
+  |   |-- 06-3a-09
+  ...
+
+so that the build system can find those files and integrate them into
+the final kernel image. The early loader finds them and applies them.
+
+Needless to say, this method is not the most flexible one because it
+requires rebuilding the kernel each time updated microcode from the CPU
+vendor is available.
diff --git a/Documentation/x86/mtrr.rst b/Documentation/arch/x86/mtrr.rst
index 9f0b1851771a..f65ef034da7a 100644
--- a/Documentation/x86/mtrr.rst
+++ b/Documentation/arch/x86/mtrr.rst
@@ -28,7 +28,7 @@ are aligned with platform MTRR setup. If MTRRs are only set up by the platform
 firmware code though and the OS does not make any specific MTRR mapping
 requests mtrr_type_lookup() should always return MTRR_TYPE_INVALID.
 
-For details refer to Documentation/x86/pat.rst.
+For details refer to Documentation/arch/x86/pat.rst.
 
 .. tip::
   On Intel P6 family processors (Pentium Pro, Pentium II and later)
diff --git a/Documentation/x86/orc-unwinder.rst b/Documentation/arch/x86/orc-unwinder.rst
index d811576c1f3e..cdb257015bd9 100644
--- a/Documentation/x86/orc-unwinder.rst
+++ b/Documentation/arch/x86/orc-unwinder.rst
@@ -140,7 +140,7 @@ Unwinder implementation details
 
 Objtool generates the ORC data by integrating with the compile-time
 stack metadata validation feature, which is described in detail in
-tools/objtool/Documentation/stack-validation.txt.  After analyzing all
+tools/objtool/Documentation/objtool.txt.  After analyzing all
 the code paths of a .o file, it creates an array of orc_entry structs,
 and a parallel array of instruction addresses associated with those
 structs, and writes them to the .orc_unwind and .orc_unwind_ip sections
@@ -177,6 +177,6 @@ brutal, unyielding efficiency.
 ORC stands for Oops Rewind Capability.
 
 
-.. [1] https://lkml.kernel.org/r/20170602104048.jkkzssljsompjdwy@suse.de
-.. [2] https://lkml.kernel.org/r/d2ca5435-6386-29b8-db87-7f227c2b713a@suse.cz
+.. [1] https://lore.kernel.org/r/20170602104048.jkkzssljsompjdwy@suse.de
+.. [2] https://lore.kernel.org/r/d2ca5435-6386-29b8-db87-7f227c2b713a@suse.cz
 .. [3] http://dustin.wikidot.com/half-orcs-and-orcs
diff --git a/Documentation/x86/pat.rst b/Documentation/arch/x86/pat.rst
index 5d901771016d..5d901771016d 100644
--- a/Documentation/x86/pat.rst
+++ b/Documentation/arch/x86/pat.rst
diff --git a/Documentation/x86/pti.rst b/Documentation/arch/x86/pti.rst
index 4b858a9bad8d..4b858a9bad8d 100644
--- a/Documentation/x86/pti.rst
+++ b/Documentation/arch/x86/pti.rst
diff --git a/Documentation/x86/resctrl.rst b/Documentation/arch/x86/resctrl.rst
index 71a531061e4e..387ccbcb558f 100644
--- a/Documentation/x86/resctrl.rst
+++ b/Documentation/arch/x86/resctrl.rst
@@ -17,14 +17,21 @@ AMD refers to this feature as AMD Platform Quality of Service(AMD QoS).
 This feature is enabled by the CONFIG_X86_CPU_RESCTRL and the x86 /proc/cpuinfo
 flag bits:
 
-=============================================	================================
+===============================================	================================
 RDT (Resource Director Technology) Allocation	"rdt_a"
 CAT (Cache Allocation Technology)		"cat_l3", "cat_l2"
 CDP (Code and Data Prioritization)		"cdp_l3", "cdp_l2"
 CQM (Cache QoS Monitoring)			"cqm_llc", "cqm_occup_llc"
 MBM (Memory Bandwidth Monitoring)		"cqm_mbm_total", "cqm_mbm_local"
 MBA (Memory Bandwidth Allocation)		"mba"
-=============================================	================================
+SMBA (Slow Memory Bandwidth Allocation)         ""
+BMEC (Bandwidth Monitoring Event Configuration) ""
+===============================================	================================
+
+Historically, new features were made visible by default in /proc/cpuinfo. This
+resulted in the feature flags becoming hard to parse by humans. Adding a new
+flag to /proc/cpuinfo should be avoided if user space can obtain information
+about the feature from resctrl's info directory.
 
 To use the feature mount the file system::
 
@@ -161,6 +168,83 @@ with the following files:
 "mon_features":
 		Lists the monitoring events if
 		monitoring is enabled for the resource.
+		Example::
+
+			# cat /sys/fs/resctrl/info/L3_MON/mon_features
+			llc_occupancy
+			mbm_total_bytes
+			mbm_local_bytes
+
+		If the system supports Bandwidth Monitoring Event
+		Configuration (BMEC), then the bandwidth events will
+		be configurable. The output will be::
+
+			# cat /sys/fs/resctrl/info/L3_MON/mon_features
+			llc_occupancy
+			mbm_total_bytes
+			mbm_total_bytes_config
+			mbm_local_bytes
+			mbm_local_bytes_config
+
+"mbm_total_bytes_config", "mbm_local_bytes_config":
+	Read/write files containing the configuration for the mbm_total_bytes
+	and mbm_local_bytes events, respectively, when the Bandwidth
+	Monitoring Event Configuration (BMEC) feature is supported.
+	The event configuration settings are domain specific and affect
+	all the CPUs in the domain. When either event configuration is
+	changed, the bandwidth counters for all RMIDs of both events
+	(mbm_total_bytes as well as mbm_local_bytes) are cleared for that
+	domain. The next read for every RMID will report "Unavailable"
+	and subsequent reads will report the valid value.
+
+	Following are the types of events supported:
+
+	====    ========================================================
+	Bits    Description
+	====    ========================================================
+	6       Dirty Victims from the QOS domain to all types of memory
+	5       Reads to slow memory in the non-local NUMA domain
+	4       Reads to slow memory in the local NUMA domain
+	3       Non-temporal writes to non-local NUMA domain
+	2       Non-temporal writes to local NUMA domain
+	1       Reads to memory in the non-local NUMA domain
+	0       Reads to memory in the local NUMA domain
+	====    ========================================================
+
+	By default, the mbm_total_bytes configuration is set to 0x7f to count
+	all the event types and the mbm_local_bytes configuration is set to
+	0x15 to count all the local memory events.
+
+	Examples:
+
+	* To view the current configuration::
+	  ::
+
+	    # cat /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
+	    0=0x7f;1=0x7f;2=0x7f;3=0x7f
+
+	    # cat /sys/fs/resctrl/info/L3_MON/mbm_local_bytes_config
+	    0=0x15;1=0x15;3=0x15;4=0x15
+
+	* To change the mbm_total_bytes to count only reads on domain 0,
+	  the bits 0, 1, 4 and 5 needs to be set, which is 110011b in binary
+	  (in hexadecimal 0x33):
+	  ::
+
+	    # echo  "0=0x33" > /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
+
+	    # cat /sys/fs/resctrl/info/L3_MON/mbm_total_bytes_config
+	    0=0x33;1=0x7f;2=0x7f;3=0x7f
+
+	* To change the mbm_local_bytes to count all the slow memory reads on
+	  domain 0 and 1, the bits 4 and 5 needs to be set, which is 110000b
+	  in binary (in hexadecimal 0x30):
+	  ::
+
+	    # echo  "0=0x30;1=0x30" > /sys/fs/resctrl/info/L3_MON/mbm_local_bytes_config
+
+	    # cat /sys/fs/resctrl/info/L3_MON/mbm_local_bytes_config
+	    0=0x30;1=0x30;3=0x15;4=0x15
 
 "max_threshold_occupancy":
 		Read/write file provides the largest value (in
@@ -464,6 +548,25 @@ Memory bandwidth domain is L3 cache.
 
 	MB:<cache_id0>=bw_MBps0;<cache_id1>=bw_MBps1;...
 
+Slow Memory Bandwidth Allocation (SMBA)
+---------------------------------------
+AMD hardware supports Slow Memory Bandwidth Allocation (SMBA).
+CXL.memory is the only supported "slow" memory device. With the
+support of SMBA, the hardware enables bandwidth allocation on
+the slow memory devices. If there are multiple such devices in
+the system, the throttling logic groups all the slow sources
+together and applies the limit on them as a whole.
+
+The presence of SMBA (with CXL.memory) is independent of slow memory
+devices presence. If there are no such devices on the system, then
+configuring SMBA will have no impact on the performance of the system.
+
+The bandwidth domain for slow memory is L3 cache. Its schemata file
+is formatted as:
+::
+
+	SMBA:<cache_id0>=bandwidth0;<cache_id1>=bandwidth1;...
+
 Reading/writing the schemata file
 ---------------------------------
 Reading the schemata file will show the state of all resources
@@ -479,6 +582,46 @@ which you wish to change.  E.g.
   L3DATA:0=fffff;1=fffff;2=3c0;3=fffff
   L3CODE:0=fffff;1=fffff;2=fffff;3=fffff
 
+Reading/writing the schemata file (on AMD systems)
+--------------------------------------------------
+Reading the schemata file will show the current bandwidth limit on all
+domains. The allocated resources are in multiples of one eighth GB/s.
+When writing to the file, you need to specify what cache id you wish to
+configure the bandwidth limit.
+
+For example, to allocate 2GB/s limit on the first cache id:
+
+::
+
+  # cat schemata
+    MB:0=2048;1=2048;2=2048;3=2048
+    L3:0=ffff;1=ffff;2=ffff;3=ffff
+
+  # echo "MB:1=16" > schemata
+  # cat schemata
+    MB:0=2048;1=  16;2=2048;3=2048
+    L3:0=ffff;1=ffff;2=ffff;3=ffff
+
+Reading/writing the schemata file (on AMD systems) with SMBA feature
+--------------------------------------------------------------------
+Reading and writing the schemata file is the same as without SMBA in
+above section.
+
+For example, to allocate 8GB/s limit on the first cache id:
+
+::
+
+  # cat schemata
+    SMBA:0=2048;1=2048;2=2048;3=2048
+      MB:0=2048;1=2048;2=2048;3=2048
+      L3:0=ffff;1=ffff;2=ffff;3=ffff
+
+  # echo "SMBA:1=64" > schemata
+  # cat schemata
+    SMBA:0=2048;1=  64;2=2048;3=2048
+      MB:0=2048;1=2048;2=2048;3=2048
+      L3:0=ffff;1=ffff;2=ffff;3=ffff
+
 Cache Pseudo-Locking
 ====================
 CAT enables a user to specify the amount of cache space that an
@@ -608,12 +751,12 @@ how we can measure the latency in cycles of reading from this region and
 visualize this data with a histogram that is available if CONFIG_HIST_TRIGGERS
 is set::
 
-  # :> /sys/kernel/debug/tracing/trace
-  # echo 'hist:keys=latency' > /sys/kernel/debug/tracing/events/resctrl/pseudo_lock_mem_latency/trigger
-  # echo 1 > /sys/kernel/debug/tracing/events/resctrl/pseudo_lock_mem_latency/enable
+  # :> /sys/kernel/tracing/trace
+  # echo 'hist:keys=latency' > /sys/kernel/tracing/events/resctrl/pseudo_lock_mem_latency/trigger
+  # echo 1 > /sys/kernel/tracing/events/resctrl/pseudo_lock_mem_latency/enable
   # echo 1 > /sys/kernel/debug/resctrl/newlock/pseudo_lock_measure
-  # echo 0 > /sys/kernel/debug/tracing/events/resctrl/pseudo_lock_mem_latency/enable
-  # cat /sys/kernel/debug/tracing/events/resctrl/pseudo_lock_mem_latency/hist
+  # echo 0 > /sys/kernel/tracing/events/resctrl/pseudo_lock_mem_latency/enable
+  # cat /sys/kernel/tracing/events/resctrl/pseudo_lock_mem_latency/hist
 
   # event histogram
   #
@@ -642,11 +785,11 @@ cache of a platform. Here is how we can obtain details of the cache hits
 and misses using the platform's precision counters.
 ::
 
-  # :> /sys/kernel/debug/tracing/trace
-  # echo 1 > /sys/kernel/debug/tracing/events/resctrl/pseudo_lock_l2/enable
+  # :> /sys/kernel/tracing/trace
+  # echo 1 > /sys/kernel/tracing/events/resctrl/pseudo_lock_l2/enable
   # echo 2 > /sys/kernel/debug/resctrl/newlock/pseudo_lock_measure
-  # echo 0 > /sys/kernel/debug/tracing/events/resctrl/pseudo_lock_l2/enable
-  # cat /sys/kernel/debug/tracing/trace
+  # echo 0 > /sys/kernel/tracing/events/resctrl/pseudo_lock_l2/enable
+  # cat /sys/kernel/tracing/trace
 
   # tracer: nop
   #
diff --git a/Documentation/x86/sgx.rst b/Documentation/arch/x86/sgx.rst
index dd0ac96ff9ef..2bcbffacbed5 100644
--- a/Documentation/x86/sgx.rst
+++ b/Documentation/arch/x86/sgx.rst
@@ -10,7 +10,7 @@ Overview
 Software Guard eXtensions (SGX) hardware enables for user space applications
 to set aside private memory regions of code and data:
 
-* Privileged (ring-0) ENCLS functions orchestrate the construction of the.
+* Privileged (ring-0) ENCLS functions orchestrate the construction of the
   regions.
 * Unprivileged (ring-3) ENCLU functions allow an application to enter and
   execute inside the regions.
@@ -91,7 +91,7 @@ In addition to the traditional compiler and linker build process, SGX has a
 separate enclave “build” process.  Enclaves must be built before they can be
 executed (entered). The first step in building an enclave is opening the
 **/dev/sgx_enclave** device.  Since enclave memory is protected from direct
-access, special privileged instructions are Then used to copy data into enclave
+access, special privileged instructions are then used to copy data into enclave
 pages and establish enclave page permissions.
 
 .. kernel-doc:: arch/x86/kernel/cpu/sgx/ioctl.c
@@ -100,6 +100,21 @@ pages and establish enclave page permissions.
                sgx_ioc_enclave_init
                sgx_ioc_enclave_provision
 
+Enclave runtime management
+--------------------------
+
+Systems supporting SGX2 additionally support changes to initialized
+enclaves: modifying enclave page permissions and type, and dynamically
+adding and removing of enclave pages. When an enclave accesses an address
+within its address range that does not have a backing page then a new
+regular page will be dynamically added to the enclave. The enclave is
+still required to run EACCEPT on the new page before it can be used.
+
+.. kernel-doc:: arch/x86/kernel/cpu/sgx/ioctl.c
+   :functions: sgx_ioc_enclave_restrict_permissions
+               sgx_ioc_enclave_modify_types
+               sgx_ioc_enclave_remove_pages
+
 Enclave vDSO
 ------------
 
@@ -126,13 +141,13 @@ the need to juggle signal handlers.
 ksgxd
 =====
 
-SGX support includes a kernel thread called *ksgxwapd*.
+SGX support includes a kernel thread called *ksgxd*.
 
 EPC sanitization
 ----------------
 
 ksgxd is started when SGX initializes.  Enclave memory is typically ready
-For use when the processor powers on or resets.  However, if SGX has been in
+for use when the processor powers on or resets.  However, if SGX has been in
 use since the reset, enclave pages may be in an inconsistent state.  This might
 occur after a crash and kexec() cycle, for instance.  At boot, ksgxd
 reinitializes all enclave pages so that they can be allocated and re-used.
@@ -147,7 +162,7 @@ Page reclaimer
 
 Similar to the core kswapd, ksgxd, is responsible for managing the
 overcommitment of enclave memory.  If the system runs out of enclave memory,
-*ksgxwapd* “swaps” enclave memory to normal memory.
+*ksgxd* “swaps” enclave memory to normal memory.
 
 Launch Control
 ==============
@@ -156,7 +171,7 @@ SGX provides a launch control mechanism. After all enclave pages have been
 copied, kernel executes EINIT function, which initializes the enclave. Only after
 this the CPU can execute inside the enclave.
 
-ENIT function takes an RSA-3072 signature of the enclave measurement.  The function
+EINIT function takes an RSA-3072 signature of the enclave measurement.  The function
 checks that the measurement is correct and signature is signed with the key
 hashed to the four **IA32_SGXLEPUBKEYHASH{0, 1, 2, 3}** MSRs representing the
 SHA256 of a public key.
@@ -184,7 +199,7 @@ CPUs starting from Icelake use Total Memory Encryption (TME) in the place of
 MEE. TME-based SGX implementations do not have an integrity Merkle tree, which
 means integrity and replay-attacks are not mitigated.  B, it includes
 additional changes to prevent cipher text from being returned and SW memory
-aliases from being Created.
+aliases from being created.
 
 DMA to enclave memory is blocked by range registers on both MEE and TME systems
 (SDM section 41.10).
@@ -250,3 +265,38 @@ user wants to deploy SGX applications both on the host and in guests
 on the same machine, the user should reserve enough EPC (by taking out
 total virtual EPC size of all SGX VMs from the physical EPC size) for
 host SGX applications so they can run with acceptable performance.
+
+Architectural behavior is to restore all EPC pages to an uninitialized
+state also after a guest reboot.  Because this state can be reached only
+through the privileged ``ENCLS[EREMOVE]`` instruction, ``/dev/sgx_vepc``
+provides the ``SGX_IOC_VEPC_REMOVE_ALL`` ioctl to execute the instruction
+on all pages in the virtual EPC.
+
+``EREMOVE`` can fail for three reasons.  Userspace must pay attention
+to expected failures and handle them as follows:
+
+1. Page removal will always fail when any thread is running in the
+   enclave to which the page belongs.  In this case the ioctl will
+   return ``EBUSY`` independent of whether it has successfully removed
+   some pages; userspace can avoid these failures by preventing execution
+   of any vcpu which maps the virtual EPC.
+
+2. Page removal will cause a general protection fault if two calls to
+   ``EREMOVE`` happen concurrently for pages that refer to the same
+   "SECS" metadata pages.  This can happen if there are concurrent
+   invocations to ``SGX_IOC_VEPC_REMOVE_ALL``, or if a ``/dev/sgx_vepc``
+   file descriptor in the guest is closed at the same time as
+   ``SGX_IOC_VEPC_REMOVE_ALL``; it will also be reported as ``EBUSY``.
+   This can be avoided in userspace by serializing calls to the ioctl()
+   and to close(), but in general it should not be a problem.
+
+3. Finally, page removal will fail for SECS metadata pages which still
+   have child pages.  Child pages can be removed by executing
+   ``SGX_IOC_VEPC_REMOVE_ALL`` on all ``/dev/sgx_vepc`` file descriptors
+   mapped into the guest.  This means that the ioctl() must be called
+   twice: an initial set of calls to remove child pages and a subsequent
+   set of calls to remove SECS pages.  The second set of calls is only
+   required for those mappings that returned a nonzero value from the
+   first call.  It indicates a bug in the kernel or the userspace client
+   if any of the second round of ``SGX_IOC_VEPC_REMOVE_ALL`` calls has
+   a return code other than 0.
diff --git a/Documentation/x86/sva.rst b/Documentation/arch/x86/sva.rst
index 076efd51ef1f..33cb05005982 100644
--- a/Documentation/x86/sva.rst
+++ b/Documentation/arch/x86/sva.rst
@@ -104,18 +104,47 @@ The MSR must be configured on each logical CPU before any application
 thread can interact with a device. Threads that belong to the same
 process share the same page tables, thus the same MSR value.
 
-PASID is cleared when a process is created. The PASID allocation and MSR
-programming may occur long after a process and its threads have been created.
-One thread must call iommu_sva_bind_device() to allocate the PASID for the
-process. If a thread uses ENQCMD without the MSR first being populated, a #GP
-will be raised. The kernel will update the PASID MSR with the PASID for all
-threads in the process. A single process PASID can be used simultaneously
-with multiple devices since they all share the same address space.
-
-One thread can call iommu_sva_unbind_device() to free the allocated PASID.
-The kernel will clear the PASID MSR for all threads belonging to the process.
-
-New threads inherit the MSR value from the parent.
+PASID Life Cycle Management
+===========================
+
+PASID is initialized as IOMMU_PASID_INVALID (-1) when a process is created.
+
+Only processes that access SVA-capable devices need to have a PASID
+allocated. This allocation happens when a process opens/binds an SVA-capable
+device but finds no PASID for this process. Subsequent binds of the same, or
+other devices will share the same PASID.
+
+Although the PASID is allocated to the process by opening a device,
+it is not active in any of the threads of that process. It's loaded to the
+IA32_PASID MSR lazily when a thread tries to submit a work descriptor
+to a device using the ENQCMD.
+
+That first access will trigger a #GP fault because the IA32_PASID MSR
+has not been initialized with the PASID value assigned to the process
+when the device was opened. The Linux #GP handler notes that a PASID has
+been allocated for the process, and so initializes the IA32_PASID MSR
+and returns so that the ENQCMD instruction is re-executed.
+
+On fork(2) or exec(2) the PASID is removed from the process as it no
+longer has the same address space that it had when the device was opened.
+
+On clone(2) the new task shares the same address space, so will be
+able to use the PASID allocated to the process. The IA32_PASID is not
+preemptively initialized as the PASID value might not be allocated yet or
+the kernel does not know whether this thread is going to access the device
+and the cleared IA32_PASID MSR reduces context switch overhead by xstate
+init optimization. Since #GP faults have to be handled on any threads that
+were created before the PASID was assigned to the mm of the process, newly
+created threads might as well be treated in a consistent way.
+
+Due to complexity of freeing the PASID and clearing all IA32_PASID MSRs in
+all threads in unbind, free the PASID lazily only on mm exit.
+
+If a process does a close(2) of the device file descriptor and munmap(2)
+of the device MMIO portal, then the driver will unbind the device. The
+PASID is still marked VALID in the PASID_MSR for any threads in the
+process that accessed the device. But this is harmless as without the
+MMIO portal they cannot submit new work to the device.
 
 Relationships
 =============
diff --git a/Documentation/arch/x86/tdx.rst b/Documentation/arch/x86/tdx.rst
new file mode 100644
index 000000000000..dc8d9fd2c3f7
--- /dev/null
+++ b/Documentation/arch/x86/tdx.rst
@@ -0,0 +1,261 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=====================================
+Intel Trust Domain Extensions (TDX)
+=====================================
+
+Intel's Trust Domain Extensions (TDX) protect confidential guest VMs from
+the host and physical attacks by isolating the guest register state and by
+encrypting the guest memory. In TDX, a special module running in a special
+mode sits between the host and the guest and manages the guest/host
+separation.
+
+Since the host cannot directly access guest registers or memory, much
+normal functionality of a hypervisor must be moved into the guest. This is
+implemented using a Virtualization Exception (#VE) that is handled by the
+guest kernel. A #VE is handled entirely inside the guest kernel, but some
+require the hypervisor to be consulted.
+
+TDX includes new hypercall-like mechanisms for communicating from the
+guest to the hypervisor or the TDX module.
+
+New TDX Exceptions
+==================
+
+TDX guests behave differently from bare-metal and traditional VMX guests.
+In TDX guests, otherwise normal instructions or memory accesses can cause
+#VE or #GP exceptions.
+
+Instructions marked with an '*' conditionally cause exceptions.  The
+details for these instructions are discussed below.
+
+Instruction-based #VE
+---------------------
+
+- Port I/O (INS, OUTS, IN, OUT)
+- HLT
+- MONITOR, MWAIT
+- WBINVD, INVD
+- VMCALL
+- RDMSR*,WRMSR*
+- CPUID*
+
+Instruction-based #GP
+---------------------
+
+- All VMX instructions: INVEPT, INVVPID, VMCLEAR, VMFUNC, VMLAUNCH,
+  VMPTRLD, VMPTRST, VMREAD, VMRESUME, VMWRITE, VMXOFF, VMXON
+- ENCLS, ENCLU
+- GETSEC
+- RSM
+- ENQCMD
+- RDMSR*,WRMSR*
+
+RDMSR/WRMSR Behavior
+--------------------
+
+MSR access behavior falls into three categories:
+
+- #GP generated
+- #VE generated
+- "Just works"
+
+In general, the #GP MSRs should not be used in guests.  Their use likely
+indicates a bug in the guest.  The guest may try to handle the #GP with a
+hypercall but it is unlikely to succeed.
+
+The #VE MSRs are typically able to be handled by the hypervisor.  Guests
+can make a hypercall to the hypervisor to handle the #VE.
+
+The "just works" MSRs do not need any special guest handling.  They might
+be implemented by directly passing through the MSR to the hardware or by
+trapping and handling in the TDX module.  Other than possibly being slow,
+these MSRs appear to function just as they would on bare metal.
+
+CPUID Behavior
+--------------
+
+For some CPUID leaves and sub-leaves, the virtualized bit fields of CPUID
+return values (in guest EAX/EBX/ECX/EDX) are configurable by the
+hypervisor. For such cases, the Intel TDX module architecture defines two
+virtualization types:
+
+- Bit fields for which the hypervisor controls the value seen by the guest
+  TD.
+
+- Bit fields for which the hypervisor configures the value such that the
+  guest TD either sees their native value or a value of 0.  For these bit
+  fields, the hypervisor can mask off the native values, but it can not
+  turn *on* values.
+
+A #VE is generated for CPUID leaves and sub-leaves that the TDX module does
+not know how to handle. The guest kernel may ask the hypervisor for the
+value with a hypercall.
+
+#VE on Memory Accesses
+======================
+
+There are essentially two classes of TDX memory: private and shared.
+Private memory receives full TDX protections.  Its content is protected
+against access from the hypervisor.  Shared memory is expected to be
+shared between guest and hypervisor and does not receive full TDX
+protections.
+
+A TD guest is in control of whether its memory accesses are treated as
+private or shared.  It selects the behavior with a bit in its page table
+entries.  This helps ensure that a guest does not place sensitive
+information in shared memory, exposing it to the untrusted hypervisor.
+
+#VE on Shared Memory
+--------------------
+
+Access to shared mappings can cause a #VE.  The hypervisor ultimately
+controls whether a shared memory access causes a #VE, so the guest must be
+careful to only reference shared pages it can safely handle a #VE.  For
+instance, the guest should be careful not to access shared memory in the
+#VE handler before it reads the #VE info structure (TDG.VP.VEINFO.GET).
+
+Shared mapping content is entirely controlled by the hypervisor. The guest
+should only use shared mappings for communicating with the hypervisor.
+Shared mappings must never be used for sensitive memory content like kernel
+stacks.  A good rule of thumb is that hypervisor-shared memory should be
+treated the same as memory mapped to userspace.  Both the hypervisor and
+userspace are completely untrusted.
+
+MMIO for virtual devices is implemented as shared memory.  The guest must
+be careful not to access device MMIO regions unless it is also prepared to
+handle a #VE.
+
+#VE on Private Pages
+--------------------
+
+An access to private mappings can also cause a #VE.  Since all kernel
+memory is also private memory, the kernel might theoretically need to
+handle a #VE on arbitrary kernel memory accesses.  This is not feasible, so
+TDX guests ensure that all guest memory has been "accepted" before memory
+is used by the kernel.
+
+A modest amount of memory (typically 512M) is pre-accepted by the firmware
+before the kernel runs to ensure that the kernel can start up without
+being subjected to a #VE.
+
+The hypervisor is permitted to unilaterally move accepted pages to a
+"blocked" state. However, if it does this, page access will not generate a
+#VE.  It will, instead, cause a "TD Exit" where the hypervisor is required
+to handle the exception.
+
+Linux #VE handler
+=================
+
+Just like page faults or #GP's, #VE exceptions can be either handled or be
+fatal.  Typically, an unhandled userspace #VE results in a SIGSEGV.
+An unhandled kernel #VE results in an oops.
+
+Handling nested exceptions on x86 is typically nasty business.  A #VE
+could be interrupted by an NMI which triggers another #VE and hilarity
+ensues.  The TDX #VE architecture anticipated this scenario and includes a
+feature to make it slightly less nasty.
+
+During #VE handling, the TDX module ensures that all interrupts (including
+NMIs) are blocked.  The block remains in place until the guest makes a
+TDG.VP.VEINFO.GET TDCALL.  This allows the guest to control when interrupts
+or a new #VE can be delivered.
+
+However, the guest kernel must still be careful to avoid potential
+#VE-triggering actions (discussed above) while this block is in place.
+While the block is in place, any #VE is elevated to a double fault (#DF)
+which is not recoverable.
+
+MMIO handling
+=============
+
+In non-TDX VMs, MMIO is usually implemented by giving a guest access to a
+mapping which will cause a VMEXIT on access, and then the hypervisor
+emulates the access.  That is not possible in TDX guests because VMEXIT
+will expose the register state to the host. TDX guests don't trust the host
+and can't have their state exposed to the host.
+
+In TDX, MMIO regions typically trigger a #VE exception in the guest.  The
+guest #VE handler then emulates the MMIO instruction inside the guest and
+converts it into a controlled TDCALL to the host, rather than exposing
+guest state to the host.
+
+MMIO addresses on x86 are just special physical addresses. They can
+theoretically be accessed with any instruction that accesses memory.
+However, the kernel instruction decoding method is limited. It is only
+designed to decode instructions like those generated by io.h macros.
+
+MMIO access via other means (like structure overlays) may result in an
+oops.
+
+Shared Memory Conversions
+=========================
+
+All TDX guest memory starts out as private at boot.  This memory can not
+be accessed by the hypervisor.  However, some kernel users like device
+drivers might have a need to share data with the hypervisor.  To do this,
+memory must be converted between shared and private.  This can be
+accomplished using some existing memory encryption helpers:
+
+ * set_memory_decrypted() converts a range of pages to shared.
+ * set_memory_encrypted() converts memory back to private.
+
+Device drivers are the primary user of shared memory, but there's no need
+to touch every driver. DMA buffers and ioremap() do the conversions
+automatically.
+
+TDX uses SWIOTLB for most DMA allocations. The SWIOTLB buffer is
+converted to shared on boot.
+
+For coherent DMA allocation, the DMA buffer gets converted on the
+allocation. Check force_dma_unencrypted() for details.
+
+Attestation
+===========
+
+Attestation is used to verify the TDX guest trustworthiness to other
+entities before provisioning secrets to the guest. For example, a key
+server may want to use attestation to verify that the guest is the
+desired one before releasing the encryption keys to mount the encrypted
+rootfs or a secondary drive.
+
+The TDX module records the state of the TDX guest in various stages of
+the guest boot process using the build time measurement register (MRTD)
+and runtime measurement registers (RTMR). Measurements related to the
+guest initial configuration and firmware image are recorded in the MRTD
+register. Measurements related to initial state, kernel image, firmware
+image, command line options, initrd, ACPI tables, etc are recorded in
+RTMR registers. For more details, as an example, please refer to TDX
+Virtual Firmware design specification, section titled "TD Measurement".
+At TDX guest runtime, the attestation process is used to attest to these
+measurements.
+
+The attestation process consists of two steps: TDREPORT generation and
+Quote generation.
+
+TDX guest uses TDCALL[TDG.MR.REPORT] to get the TDREPORT (TDREPORT_STRUCT)
+from the TDX module. TDREPORT is a fixed-size data structure generated by
+the TDX module which contains guest-specific information (such as build
+and boot measurements), platform security version, and the MAC to protect
+the integrity of the TDREPORT. A user-provided 64-Byte REPORTDATA is used
+as input and included in the TDREPORT. Typically it can be some nonce
+provided by attestation service so the TDREPORT can be verified uniquely.
+More details about the TDREPORT can be found in Intel TDX Module
+specification, section titled "TDG.MR.REPORT Leaf".
+
+After getting the TDREPORT, the second step of the attestation process
+is to send it to the Quoting Enclave (QE) to generate the Quote. TDREPORT
+by design can only be verified on the local platform as the MAC key is
+bound to the platform. To support remote verification of the TDREPORT,
+TDX leverages Intel SGX Quoting Enclave to verify the TDREPORT locally
+and convert it to a remotely verifiable Quote. Method of sending TDREPORT
+to QE is implementation specific. Attestation software can choose
+whatever communication channel available (i.e. vsock or TCP/IP) to
+send the TDREPORT to QE and receive the Quote.
+
+References
+==========
+
+TDX reference material is collected here:
+
+https://www.intel.com/content/www/us/en/developer/articles/technical/intel-trust-domain-extensions.html
diff --git a/Documentation/x86/tlb.rst b/Documentation/arch/x86/tlb.rst
index 82ec58ae63a8..82ec58ae63a8 100644
--- a/Documentation/x86/tlb.rst
+++ b/Documentation/arch/x86/tlb.rst
diff --git a/Documentation/x86/topology.rst b/Documentation/arch/x86/topology.rst
index 7f58010ea86a..7f58010ea86a 100644
--- a/Documentation/x86/topology.rst
+++ b/Documentation/arch/x86/topology.rst
diff --git a/Documentation/x86/tsx_async_abort.rst b/Documentation/arch/x86/tsx_async_abort.rst
index 583ddc185ba2..583ddc185ba2 100644
--- a/Documentation/x86/tsx_async_abort.rst
+++ b/Documentation/arch/x86/tsx_async_abort.rst
diff --git a/Documentation/x86/usb-legacy-support.rst b/Documentation/arch/x86/usb-legacy-support.rst
index e01c08b7c981..e01c08b7c981 100644
--- a/Documentation/x86/usb-legacy-support.rst
+++ b/Documentation/arch/x86/usb-legacy-support.rst
diff --git a/Documentation/x86/x86_64/5level-paging.rst b/Documentation/arch/x86/x86_64/5level-paging.rst
index b792bbdc0b01..71f882f4a173 100644
--- a/Documentation/x86/x86_64/5level-paging.rst
+++ b/Documentation/arch/x86/x86_64/5level-paging.rst
@@ -20,7 +20,7 @@ physical address space. This "ought to be enough for anybody" ©.
 QEMU 2.9 and later support 5-level paging.
 
 Virtual memory layout for 5-level paging is described in
-Documentation/x86/x86_64/mm.rst
+Documentation/arch/x86/x86_64/mm.rst
 
 
 Enabling 5-level paging
diff --git a/Documentation/x86/x86_64/boot-options.rst b/Documentation/arch/x86/x86_64/boot-options.rst
index ccb7e86bf8d9..137432d34109 100644
--- a/Documentation/x86/x86_64/boot-options.rst
+++ b/Documentation/arch/x86/x86_64/boot-options.rst
@@ -9,7 +9,7 @@ only the AMD64 specific ones are listed here.
 
 Machine check
 =============
-Please see Documentation/x86/x86_64/machinecheck.rst for sysfs runtime tunables.
+Please see Documentation/arch/x86/x86_64/machinecheck.rst for sysfs runtime tunables.
 
    mce=off
 		Disable machine check
@@ -47,14 +47,7 @@ Please see Documentation/x86/x86_64/machinecheck.rst for sysfs runtime tunables.
 		in a reboot. On Intel systems it is enabled by default.
    mce=nobootlog
 		Disable boot machine check logging.
-   mce=tolerancelevel[,monarchtimeout] (number,number)
-		tolerance levels:
-		0: always panic on uncorrected errors, log corrected errors
-		1: panic or SIGBUS on uncorrected errors, log corrected errors
-		2: SIGBUS or log uncorrected errors, log corrected errors
-		3: never panic or SIGBUS, log all errors (for testing only)
-		Default is 1
-		Can be also set using sysfs which is preferable.
+   mce=monarchtimeout (number)
 		monarchtimeout:
 		Sets the time in us to wait for other CPUs on machine checks. 0
 		to disable.
@@ -89,7 +82,7 @@ APICs
      Don't use the local APIC (alias for i386 compatibility)
 
    pirq=...
-	See Documentation/x86/i386/IO-APIC.rst
+	See Documentation/arch/x86/i386/IO-APIC.rst
 
    noapictimer
 	Don't set up the APIC timer
@@ -164,15 +157,6 @@ Rebooting
      newer BIOS, or newer board) using this option will ignore the built-in
      quirk table, and use the generic default reboot actions.
 
-Non Executable Mappings
-=======================
-
-  noexec=on|off
-    on
-      Enable(default)
-    off
-      Disable
-
 NUMA
 ====
 
@@ -303,11 +287,13 @@ iommu options only relevant to the AMD GART hardware IOMMU:
 iommu options only relevant to the software bounce buffering (SWIOTLB) IOMMU
 implementation:
 
-    swiotlb=<pages>[,force]
-      <pages>
-        Prereserve that many 128K pages for the software IO bounce buffering.
+    swiotlb=<slots>[,force,noforce]
+      <slots>
+        Prereserve that many 2K slots for the software IO bounce buffering.
       force
         Force all IO through the software TLB.
+      noforce
+        Do not initialize the software TLB.
 
 
 Miscellaneous
@@ -317,3 +303,17 @@ Miscellaneous
     Do not use GB pages for kernel direct mappings.
   gbpages
     Use GB pages for kernel direct mappings.
+
+
+AMD SEV (Secure Encrypted Virtualization)
+=========================================
+Options relating to AMD SEV, specified via the following format:
+
+::
+
+   sev=option1[,option2]
+
+The available options are:
+
+   debug
+     Enable debug messages.
diff --git a/Documentation/x86/x86_64/cpu-hotplug-spec.rst b/Documentation/arch/x86/x86_64/cpu-hotplug-spec.rst
index 8d1c91f0c880..8d1c91f0c880 100644
--- a/Documentation/x86/x86_64/cpu-hotplug-spec.rst
+++ b/Documentation/arch/x86/x86_64/cpu-hotplug-spec.rst
diff --git a/Documentation/x86/x86_64/fake-numa-for-cpusets.rst b/Documentation/arch/x86/x86_64/fake-numa-for-cpusets.rst
index ff9bcfd2cc14..ba74617d4999 100644
--- a/Documentation/x86/x86_64/fake-numa-for-cpusets.rst
+++ b/Documentation/arch/x86/x86_64/fake-numa-for-cpusets.rst
@@ -18,7 +18,7 @@ For more information on the features of cpusets, see
 Documentation/admin-guide/cgroup-v1/cpusets.rst.
 There are a number of different configurations you can use for your needs.  For
 more information on the numa=fake command line option and its various ways of
-configuring fake nodes, see Documentation/x86/x86_64/boot-options.rst.
+configuring fake nodes, see Documentation/arch/x86/x86_64/boot-options.rst.
 
 For the purposes of this introduction, we'll assume a very primitive NUMA
 emulation setup of "numa=fake=4*512,".  This will split our system memory into
diff --git a/Documentation/x86/x86_64/fsgs.rst b/Documentation/arch/x86/x86_64/fsgs.rst
index 50960e09e1f6..50960e09e1f6 100644
--- a/Documentation/x86/x86_64/fsgs.rst
+++ b/Documentation/arch/x86/x86_64/fsgs.rst
diff --git a/Documentation/x86/x86_64/index.rst b/Documentation/arch/x86/x86_64/index.rst
index a56070fc8e77..a56070fc8e77 100644
--- a/Documentation/x86/x86_64/index.rst
+++ b/Documentation/arch/x86/x86_64/index.rst
diff --git a/Documentation/arch/x86/x86_64/machinecheck.rst b/Documentation/arch/x86/x86_64/machinecheck.rst
new file mode 100644
index 000000000000..cea12ee97200
--- /dev/null
+++ b/Documentation/arch/x86/x86_64/machinecheck.rst
@@ -0,0 +1,33 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================================================
+Configurable sysfs parameters for the x86-64 machine check code
+===============================================================
+
+Machine checks report internal hardware error conditions detected
+by the CPU. Uncorrected errors typically cause a machine check
+(often with panic), corrected ones cause a machine check log entry.
+
+Machine checks are organized in banks (normally associated with
+a hardware subsystem) and subevents in a bank. The exact meaning
+of the banks and subevent is CPU specific.
+
+mcelog knows how to decode them.
+
+When you see the "Machine check errors logged" message in the system
+log then mcelog should run to collect and decode machine check entries
+from /dev/mcelog. Normally mcelog should be run regularly from a cronjob.
+
+Each CPU has a directory in /sys/devices/system/machinecheck/machinecheckN
+(N = CPU number).
+
+The directory contains some configurable entries. See
+Documentation/ABI/testing/sysfs-mce for more details.
+
+TBD document entries for AMD threshold interrupt configuration
+
+For more details about the x86 machine check architecture
+see the Intel and AMD architecture manuals from their developer websites.
+
+For more details about the architecture
+see http://one.firstfloor.org/~andi/mce.pdf
diff --git a/Documentation/x86/x86_64/mm.rst b/Documentation/arch/x86/x86_64/mm.rst
index 9798676bb0bf..35e5e18c83d0 100644
--- a/Documentation/x86/x86_64/mm.rst
+++ b/Documentation/arch/x86/x86_64/mm.rst
@@ -140,7 +140,7 @@ The direct mapping covers all memory in the system up to the highest
 memory address (this means in some cases it can also include PCI memory
 holes).
 
-We map EFI runtime services in the 'efi_pgd' PGD in a 64Gb large virtual
+We map EFI runtime services in the 'efi_pgd' PGD in a 64GB large virtual
 memory window (this size is arbitrary, it can be raised later if needed).
 The mappings are not part of any other kernel PGD and are only available
 during EFI runtime calls.
diff --git a/Documentation/x86/x86_64/uefi.rst b/Documentation/arch/x86/x86_64/uefi.rst
index 3b894103a734..fbc30c9a071d 100644
--- a/Documentation/x86/x86_64/uefi.rst
+++ b/Documentation/arch/x86/x86_64/uefi.rst
@@ -29,7 +29,7 @@ Mechanics
   be selected::
 
 	CONFIG_EFI=y
-	CONFIG_EFI_VARS=y or m		# optional
+	CONFIG_EFIVAR_FS=y or m		# optional
 
 - Create a VFAT partition on the disk
 - Copy the following to the VFAT partition:
diff --git a/Documentation/arch/x86/xstate.rst b/Documentation/arch/x86/xstate.rst
new file mode 100644
index 000000000000..ae5c69e48b11
--- /dev/null
+++ b/Documentation/arch/x86/xstate.rst
@@ -0,0 +1,174 @@
+Using XSTATE features in user space applications
+================================================
+
+The x86 architecture supports floating-point extensions which are
+enumerated via CPUID. Applications consult CPUID and use XGETBV to
+evaluate which features have been enabled by the kernel XCR0.
+
+Up to AVX-512 and PKRU states, these features are automatically enabled by
+the kernel if available. Features like AMX TILE_DATA (XSTATE component 18)
+are enabled by XCR0 as well, but the first use of related instruction is
+trapped by the kernel because by default the required large XSTATE buffers
+are not allocated automatically.
+
+The purpose for dynamic features
+--------------------------------
+
+Legacy userspace libraries often have hard-coded, static sizes for
+alternate signal stacks, often using MINSIGSTKSZ which is typically 2KB.
+That stack must be able to store at *least* the signal frame that the
+kernel sets up before jumping into the signal handler. That signal frame
+must include an XSAVE buffer defined by the CPU.
+
+However, that means that the size of signal stacks is dynamic, not static,
+because different CPUs have differently-sized XSAVE buffers. A compiled-in
+size of 2KB with existing applications is too small for new CPU features
+like AMX. Instead of universally requiring larger stack, with the dynamic
+enabling, the kernel can enforce userspace applications to have
+properly-sized altstacks.
+
+Using dynamically enabled XSTATE features in user space applications
+--------------------------------------------------------------------
+
+The kernel provides an arch_prctl(2) based mechanism for applications to
+request the usage of such features. The arch_prctl(2) options related to
+this are:
+
+-ARCH_GET_XCOMP_SUPP
+
+ arch_prctl(ARCH_GET_XCOMP_SUPP, &features);
+
+ ARCH_GET_XCOMP_SUPP stores the supported features in userspace storage of
+ type uint64_t. The second argument is a pointer to that storage.
+
+-ARCH_GET_XCOMP_PERM
+
+ arch_prctl(ARCH_GET_XCOMP_PERM, &features);
+
+ ARCH_GET_XCOMP_PERM stores the features for which the userspace process
+ has permission in userspace storage of type uint64_t. The second argument
+ is a pointer to that storage.
+
+-ARCH_REQ_XCOMP_PERM
+
+ arch_prctl(ARCH_REQ_XCOMP_PERM, feature_nr);
+
+ ARCH_REQ_XCOMP_PERM allows to request permission for a dynamically enabled
+ feature or a feature set. A feature set can be mapped to a facility, e.g.
+ AMX, and can require one or more XSTATE components to be enabled.
+
+ The feature argument is the number of the highest XSTATE component which
+ is required for a facility to work.
+
+When requesting permission for a feature, the kernel checks the
+availability. The kernel ensures that sigaltstacks in the process's tasks
+are large enough to accommodate the resulting large signal frame. It
+enforces this both during ARCH_REQ_XCOMP_SUPP and during any subsequent
+sigaltstack(2) calls. If an installed sigaltstack is smaller than the
+resulting sigframe size, ARCH_REQ_XCOMP_SUPP results in -ENOSUPP. Also,
+sigaltstack(2) results in -ENOMEM if the requested altstack is too small
+for the permitted features.
+
+Permission, when granted, is valid per process. Permissions are inherited
+on fork(2) and cleared on exec(3).
+
+The first use of an instruction related to a dynamically enabled feature is
+trapped by the kernel. The trap handler checks whether the process has
+permission to use the feature. If the process has no permission then the
+kernel sends SIGILL to the application. If the process has permission then
+the handler allocates a larger xstate buffer for the task so the large
+state can be context switched. In the unlikely cases that the allocation
+fails, the kernel sends SIGSEGV.
+
+AMX TILE_DATA enabling example
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Below is the example of how userspace applications enable
+TILE_DATA dynamically:
+
+  1. The application first needs to query the kernel for AMX
+     support::
+
+        #include <asm/prctl.h>
+        #include <sys/syscall.h>
+        #include <stdio.h>
+        #include <unistd.h>
+
+        #ifndef ARCH_GET_XCOMP_SUPP
+        #define ARCH_GET_XCOMP_SUPP  0x1021
+        #endif
+
+        #ifndef ARCH_XCOMP_TILECFG
+        #define ARCH_XCOMP_TILECFG   17
+        #endif
+
+        #ifndef ARCH_XCOMP_TILEDATA
+        #define ARCH_XCOMP_TILEDATA  18
+        #endif
+
+        #define MASK_XCOMP_TILE      ((1 << ARCH_XCOMP_TILECFG) | \
+                                      (1 << ARCH_XCOMP_TILEDATA))
+
+        unsigned long features;
+        long rc;
+
+        ...
+
+        rc = syscall(SYS_arch_prctl, ARCH_GET_XCOMP_SUPP, &features);
+
+        if (!rc && (features & MASK_XCOMP_TILE) == MASK_XCOMP_TILE)
+            printf("AMX is available.\n");
+
+  2. After that, determining support for AMX, an application must
+     explicitly ask permission to use it::
+
+        #ifndef ARCH_REQ_XCOMP_PERM
+        #define ARCH_REQ_XCOMP_PERM  0x1023
+        #endif
+
+        ...
+
+        rc = syscall(SYS_arch_prctl, ARCH_REQ_XCOMP_PERM, ARCH_XCOMP_TILEDATA);
+
+        if (!rc)
+            printf("AMX is ready for use.\n");
+
+Note this example does not include the sigaltstack preparation.
+
+Dynamic features in signal frames
+---------------------------------
+
+Dynamcally enabled features are not written to the signal frame upon signal
+entry if the feature is in its initial configuration.  This differs from
+non-dynamic features which are always written regardless of their
+configuration.  Signal handlers can examine the XSAVE buffer's XSTATE_BV
+field to determine if a features was written.
+
+Dynamic features for virtual machines
+-------------------------------------
+
+The permission for the guest state component needs to be managed separately
+from the host, as they are exclusive to each other. A coupled of options
+are extended to control the guest permission:
+
+-ARCH_GET_XCOMP_GUEST_PERM
+
+ arch_prctl(ARCH_GET_XCOMP_GUEST_PERM, &features);
+
+ ARCH_GET_XCOMP_GUEST_PERM is a variant of ARCH_GET_XCOMP_PERM. So it
+ provides the same semantics and functionality but for the guest
+ components.
+
+-ARCH_REQ_XCOMP_GUEST_PERM
+
+ arch_prctl(ARCH_REQ_XCOMP_GUEST_PERM, feature_nr);
+
+ ARCH_REQ_XCOMP_GUEST_PERM is a variant of ARCH_REQ_XCOMP_PERM. It has the
+ same semantics for the guest permission. While providing a similar
+ functionality, this comes with a constraint. Permission is frozen when the
+ first VCPU is created. Any attempt to change permission after that point
+ is going to be rejected. So, the permission has to be requested before the
+ first VCPU creation.
+
+Note that some VMMs may have already established a set of supported state
+components. These options are not presumed to support any particular VMM.
diff --git a/Documentation/x86/zero-page.rst b/Documentation/arch/x86/zero-page.rst
index f088f5881666..45aa9cceb4f1 100644
--- a/Documentation/x86/zero-page.rst
+++ b/Documentation/arch/x86/zero-page.rst
@@ -19,6 +19,7 @@ Offset/Size	Proto	Name			Meaning
 058/008		ALL	tboot_addr      	Physical address of tboot shared page
 060/010		ALL	ist_info		Intel SpeedStep (IST) BIOS support information
 						(struct ist_info)
+070/008		ALL	acpi_rsdp_addr		Physical address of ACPI RSDP table
 080/010		ALL	hd0_info		hd0 disk parameter, OBSOLETE!!
 090/010		ALL	hd1_info		hd1 disk parameter, OBSOLETE!!
 0A0/010		ALL	sys_desc_table		System description table (struct sys_desc_table),
@@ -27,6 +28,7 @@ Offset/Size	Proto	Name			Meaning
 0C0/004		ALL	ext_ramdisk_image	ramdisk_image high 32bits
 0C4/004		ALL	ext_ramdisk_size	ramdisk_size high 32bits
 0C8/004		ALL	ext_cmd_line_ptr	cmd_line_ptr high 32bits
+13C/004		ALL	cc_blob_address		Physical address of Confidential Computing blob
 140/080		ALL	edid_info		Video mode setup (struct edid_info)
 1C0/020		ALL	efi_info		EFI 32 information (struct efi_info)
 1E0/004		ALL	alt_mem_k		Alternative mem check, in KB
diff --git a/Documentation/xtensa/atomctl.rst b/Documentation/arch/xtensa/atomctl.rst
index 1ecbd0ba9a2e..1ecbd0ba9a2e 100644
--- a/Documentation/xtensa/atomctl.rst
+++ b/Documentation/arch/xtensa/atomctl.rst
diff --git a/Documentation/xtensa/booting.rst b/Documentation/arch/xtensa/booting.rst
index e1b83707e5b6..e1b83707e5b6 100644
--- a/Documentation/xtensa/booting.rst
+++ b/Documentation/arch/xtensa/booting.rst
diff --git a/Documentation/xtensa/features.rst b/Documentation/arch/xtensa/features.rst
index 6b92c7bfa19d..6b92c7bfa19d 100644
--- a/Documentation/xtensa/features.rst
+++ b/Documentation/arch/xtensa/features.rst
diff --git a/Documentation/xtensa/index.rst b/Documentation/arch/xtensa/index.rst
index 69952446a9be..69952446a9be 100644
--- a/Documentation/xtensa/index.rst
+++ b/Documentation/arch/xtensa/index.rst
diff --git a/Documentation/xtensa/mmu.rst b/Documentation/arch/xtensa/mmu.rst
index 450573afa31a..450573afa31a 100644
--- a/Documentation/xtensa/mmu.rst
+++ b/Documentation/arch/xtensa/mmu.rst
diff --git a/Documentation/arm/google/chromebook-boot-flow.rst b/Documentation/arm/google/chromebook-boot-flow.rst
new file mode 100644
index 000000000000..36da77684bba
--- /dev/null
+++ b/Documentation/arm/google/chromebook-boot-flow.rst
@@ -0,0 +1,69 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+Chromebook Boot Flow
+======================================
+
+Most recent Chromebooks that use device tree are using the opensource
+depthcharge_ bootloader. Depthcharge_ expects the OS to be packaged as a `FIT
+Image`_ which contains an OS image as well as a collection of device trees. It
+is up to depthcharge_ to pick the right device tree from the `FIT Image`_ and
+provide it to the OS.
+
+The scheme that depthcharge_ uses to pick the device tree takes into account
+three variables:
+
+- Board name, specified at depthcharge_ compile time. This is $(BOARD) below.
+- Board revision number, determined at runtime (perhaps by reading GPIO
+  strappings, perhaps via some other method). This is $(REV) below.
+- SKU number, read from GPIO strappings at boot time. This is $(SKU) below.
+
+For recent Chromebooks, depthcharge_ creates a match list that looks like this:
+
+- google,$(BOARD)-rev$(REV)-sku$(SKU)
+- google,$(BOARD)-rev$(REV)
+- google,$(BOARD)-sku$(SKU)
+- google,$(BOARD)
+
+Note that some older Chromebooks use a slightly different list that may
+not include SKU matching or may prioritize SKU/rev differently.
+
+Note that for some boards there may be extra board-specific logic to inject
+extra compatibles into the list, but this is uncommon.
+
+Depthcharge_ will look through all device trees in the `FIT Image`_ trying to
+find one that matches the most specific compatible. It will then look
+through all device trees in the `FIT Image`_ trying to find the one that
+matches the *second most* specific compatible, etc.
+
+When searching for a device tree, depthcharge_ doesn't care where the
+compatible string falls within a device tree's root compatible string array.
+As an example, if we're on board "lazor", rev 4, SKU 0 and we have two device
+trees:
+
+- "google,lazor-rev5-sku0", "google,lazor-rev4-sku0", "qcom,sc7180"
+- "google,lazor", "qcom,sc7180"
+
+Then depthcharge_ will pick the first device tree even though
+"google,lazor-rev4-sku0" was the second compatible listed in that device tree.
+This is because it is a more specific compatible than "google,lazor".
+
+It should be noted that depthcharge_ does not have any smarts to try to
+match board or SKU revisions that are "close by". That is to say that
+if depthcharge_ knows it's on "rev4" of a board but there is no "rev4"
+device tree then depthcharge_ *won't* look for a "rev3" device tree.
+
+In general when any significant changes are made to a board the board
+revision number is increased even if none of those changes need to
+be reflected in the device tree. Thus it's fairly common to see device
+trees with multiple revisions.
+
+It should be noted that, taking into account the above system that
+depthcharge_ has, the most flexibility is achieved if the device tree
+supporting the newest revision(s) of a board omits the "-rev{REV}"
+compatible strings. When this is done then if you get a new board
+revision and try to run old software on it then we'll at pick the
+newest device tree we know about.
+
+.. _depthcharge: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/platform/depthcharge/
+.. _`FIT Image`: https://doc.coreboot.org/lib/payloads/fit.html
diff --git a/Documentation/arm/index.rst b/Documentation/arm/index.rst
index d4f34ae9e6f4..fd43502ae924 100644
--- a/Documentation/arm/index.rst
+++ b/Documentation/arm/index.rst
@@ -31,6 +31,8 @@ SoC-specific documents
 .. toctree::
    :maxdepth: 1
 
+   google/chromebook-boot-flow
+
    ixp4xx
 
    marvell
@@ -55,22 +57,22 @@ SoC-specific documents
    stm32/stm32h750-overview
    stm32/stm32f769-overview
    stm32/stm32f429-overview
+   stm32/stm32mp13-overview
+   stm32/stm32mp151-overview
    stm32/stm32mp157-overview
+   stm32/stm32-dma-mdma-chaining
 
    sunxi
 
    samsung/index
-   samsung-s3c24xx/index
 
    sunxi/clocks
 
    spear/overview
 
-   sti/stih416-overview
    sti/stih407-overview
    sti/stih418-overview
    sti/overview
-   sti/stih415-overview
 
    vfp/release-notes
 
diff --git a/Documentation/arm/marvell.rst b/Documentation/arm/marvell.rst
index 56bb592dbd0c..3d369a566038 100644
--- a/Documentation/arm/marvell.rst
+++ b/Documentation/arm/marvell.rst
@@ -14,17 +14,20 @@ Orion family
 
   Flavors:
         - 88F5082
-        - 88F5181
-        - 88F5181L
-        - 88F5182
+        - 88F5181  a.k.a Orion-1
+        - 88F5181L a.k.a Orion-VoIP
+        - 88F5182  a.k.a Orion-NAS
 
                - Datasheet: https://web.archive.org/web/20210124231420/http://csclub.uwaterloo.ca/~board/ts7800/MV88F5182-datasheet.pdf
                - Programmer's User Guide: https://web.archive.org/web/20210124231536/http://csclub.uwaterloo.ca/~board/ts7800/MV88F5182-opensource-manual.pdf
                - User Manual: https://web.archive.org/web/20210124231631/http://csclub.uwaterloo.ca/~board/ts7800/MV88F5182-usermanual.pdf
-        - 88F5281
+               - Functional Errata: https://web.archive.org/web/20210704165540/https://www.digriz.org.uk/ts78xx/88F5182_Functional_Errata.pdf
+        - 88F5281  a.k.a Orion-2
 
                - Datasheet: https://web.archive.org/web/20131028144728/http://www.ocmodshop.com/images/reviews/networking/qnap_ts409u/marvel_88f5281_data_sheet.pdf
-        - 88F6183
+        - 88F6183  a.k.a Orion-1-90
+  Homepage:
+        https://web.archive.org/web/20080607215437/http://www.marvell.com/products/media/index.jsp
   Core:
 	Feroceon 88fr331 (88f51xx) or 88fr531-vd (88f52xx) ARMv5 compatible
   Linux kernel mach directory:
@@ -103,6 +106,8 @@ Discovery family
 
                 Not supported by the Linux kernel.
 
+  Homepage:
+        https://web.archive.org/web/20110924171043/http://www.marvell.com/embedded-processors/discovery-innovation/
   Core:
 	Feroceon 88fr571-vd ARMv5 compatible
 
@@ -119,6 +124,7 @@ EBU Armada family
         - 88F6707
         - 88F6W11
 
+    - Product infos:   https://web.archive.org/web/20141002083258/http://www.marvell.com/embedded-processors/armada-370/
     - Product Brief:   https://web.archive.org/web/20121115063038/http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf
     - Hardware Spec:   https://web.archive.org/web/20140617183747/http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-datasheet.pdf
     - Functional Spec: https://web.archive.org/web/20140617183701/http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-FunctionalSpec-datasheet.pdf
@@ -126,9 +132,29 @@ EBU Armada family
   Core:
 	Sheeva ARMv7 compatible PJ4B
 
+  Armada XP Flavors:
+        - MV78230
+        - MV78260
+        - MV78460
+
+    NOTE:
+	not to be confused with the non-SMP 78xx0 SoCs
+
+    - Product infos:   https://web.archive.org/web/20150101215721/http://www.marvell.com/embedded-processors/armada-xp/
+    - Product Brief:   https://web.archive.org/web/20121021173528/http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
+    - Functional Spec: https://web.archive.org/web/20180829171131/http://www.marvell.com/embedded-processors/armada-xp/assets/ARMADA-XP-Functional-SpecDatasheet.pdf
+    - Hardware Specs:
+        - https://web.archive.org/web/20141127013651/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78230_OS.PDF
+        - https://web.archive.org/web/20141222000224/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78260_OS.PDF
+        - https://web.archive.org/web/20141222000230/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78460_OS.PDF
+
+  Core:
+	Sheeva ARMv7 compatible Dual-core or Quad-core PJ4B-MP
+
   Armada 375 Flavors:
 	- 88F6720
 
+    - Product infos: https://web.archive.org/web/20140108032402/http://www.marvell.com/embedded-processors/armada-375/
     - Product Brief: https://web.archive.org/web/20131216023516/http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA_375_SoC-01_product_brief.pdf
 
   Core:
@@ -161,29 +187,6 @@ EBU Armada family
   Core:
 	ARM Cortex-A9
 
-  Armada XP Flavors:
-        - MV78230
-        - MV78260
-        - MV78460
-
-    NOTE:
-	not to be confused with the non-SMP 78xx0 SoCs
-
-    Product Brief:
-	https://web.archive.org/web/20121021173528/http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
-
-    Functional Spec:
-	https://web.archive.org/web/20180829171131/http://www.marvell.com/embedded-processors/armada-xp/assets/ARMADA-XP-Functional-SpecDatasheet.pdf
-
-    - Hardware Specs:
-
-        - https://web.archive.org/web/20141127013651/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78230_OS.PDF
-        - https://web.archive.org/web/20141222000224/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78260_OS.PDF
-        - https://web.archive.org/web/20141222000230/http://www.marvell.com/embedded-processors/armada-xp/assets/HW_MV78460_OS.PDF
-
-  Core:
-	Sheeva ARMv7 compatible Dual-core or Quad-core PJ4B-MP
-
   Linux kernel mach directory:
 	arch/arm/mach-mvebu
   Linux kernel plat directory:
@@ -212,6 +215,7 @@ EBU Armada family ARMv8
 	arch/arm64/boot/dts/marvell/armada-37*
 
   Armada 7K Flavors:
+	  - 88F6040 (AP806 Quad 600 MHz + one CP110)
 	  - 88F7020 (AP806 Dual + one CP110)
 	  - 88F7040 (AP806 Quad + one CP110)
 
@@ -243,14 +247,33 @@ EBU Armada family ARMv8
   Device tree files:
 	arch/arm64/boot/dts/marvell/armada-80*
 
+  Octeon TX2 CN913x Flavors:
+	- CN9130 (AP807 Quad + one internal CP115)
+	- CN9131 (AP807 Quad + one internal CP115 + one external CP115 / 88F8215)
+	- CN9132 (AP807 Quad + one internal CP115 + two external CP115 / 88F8215)
+
+  Core:
+	ARM Cortex A72
+
+  Homepage:
+	https://web.archive.org/web/20200803150818/https://www.marvell.com/products/infrastructure-processors/multi-core-processors/octeon-tx2/octeon-tx2-cn9130.html
+
+  Product Brief:
+	https://web.archive.org/web/20200803150818/https://www.marvell.com/content/dam/marvell/en/public-collateral/embedded-processors/marvell-infrastructure-processors-octeon-tx2-cn913x-product-brief-2020-02.pdf
+
+  Device tree files:
+	arch/arm64/boot/dts/marvell/cn913*
+
 Avanta family
 -------------
 
   Flavors:
+       - 88F6500
        - 88F6510
        - 88F6530P
        - 88F6550
        - 88F6560
+       - 88F6601
 
   Homepage:
 	https://web.archive.org/web/20181005145041/http://www.marvell.com/broadband/
@@ -353,8 +376,6 @@ PXA 2xx/3xx/93x/95x family
 
    Linux kernel mach directory:
 	arch/arm/mach-pxa
-   Linux kernel plat directory:
-	arch/arm/plat-pxa
 
 MMP/MMP2/MMP3 family (communication processor)
 ----------------------------------------------
@@ -408,8 +429,6 @@ MMP/MMP2/MMP3 family (communication processor)
 
    Linux kernel mach directory:
 	arch/arm/mach-mmp
-   Linux kernel plat directory:
-	arch/arm/plat-pxa
 
 Berlin family (Multimedia Solutions)
 -------------------------------------
@@ -417,7 +436,7 @@ Berlin family (Multimedia Solutions)
   - Flavors:
 	- 88DE3010, Armada 1000 (no Linux support)
 		- Core:		Marvell PJ1 (ARMv5TE), Dual-core
-		- Product Brief:	http://www.marvell.com.cn/digital-entertainment/assets/armada_1000_pb.pdf
+		- Product Brief:	https://web.archive.org/web/20131103162620/http://www.marvell.com/digital-entertainment/assets/armada_1000_pb.pdf
 	- 88DE3005, Armada 1500 Mini
 		- Design name:	BG2CD
 		- Core:		ARM Cortex-A9, PL310 L2CC
@@ -497,9 +516,6 @@ Long-term plans
    Business Unit) in a single mach-<foo> directory. The plat-orion/
    would therefore disappear.
 
- * Unify the mach-mmp/ and mach-pxa/ into the same mach-pxa
-   directory. The plat-pxa/ would therefore disappear.
-
 Credits
 -------
 
diff --git a/Documentation/arm/microchip.rst b/Documentation/arm/microchip.rst
index 9c013299fd3b..e721d855f2c9 100644
--- a/Documentation/arm/microchip.rst
+++ b/Documentation/arm/microchip.rst
@@ -137,6 +137,26 @@ the Microchip website: http://www.microchip.com.
 
           http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001476B.pdf
 
+    * ARM Cortex-A7 based SoCs
+      - sama7g5 family
+
+        - sama7g51
+        - sama7g52
+        - sama7g53
+        - sama7g54 (device superset)
+
+          * Datasheet
+
+          Coming soon
+
+      - lan966 family
+        - lan9662
+        - lan9668
+
+          * Datasheet
+
+          Coming soon
+
     * ARM Cortex-M7 MCUs
       - sams70 family
 
diff --git a/Documentation/arm/samsung-s3c24xx/cpufreq.rst b/Documentation/arm/samsung-s3c24xx/cpufreq.rst
deleted file mode 100644
index 2ddc26c03b1f..000000000000
--- a/Documentation/arm/samsung-s3c24xx/cpufreq.rst
+++ /dev/null
@@ -1,76 +0,0 @@
-=======================
-S3C24XX CPUfreq support
-=======================
-
-Introduction
-------------
-
- The S3C24XX series support a number of power saving systems, such as
- the ability to change the core, memory and peripheral operating
- frequencies. The core control is exported via the CPUFreq driver
- which has a number of different manual or automatic controls over the
- rate the core is running at.
-
- There are two forms of the driver depending on the specific CPU and
- how the clocks are arranged. The first implementation used as single
- PLL to feed the ARM, memory and peripherals via a series of dividers
- and muxes and this is the implementation that is documented here. A
- newer version where there is a separate PLL and clock divider for the
- ARM core is available as a separate driver.
-
-
-Layout
-------
-
- The code core manages the CPU specific drivers, any data that they
- need to register and the interface to the generic drivers/cpufreq
- system. Each CPU registers a driver to control the PLL, clock dividers
- and anything else associated with it. Any board that wants to use this
- framework needs to supply at least basic details of what is required.
-
- The core registers with drivers/cpufreq at init time if all the data
- necessary has been supplied.
-
-
-CPU support
------------
-
- The support for each CPU depends on the facilities provided by the
- SoC and the driver as each device has different PLL and clock chains
- associated with it.
-
-
-Slow Mode
----------
-
- The SLOW mode where the PLL is turned off altogether and the
- system is fed by the external crystal input is currently not
- supported.
-
-
-sysfs
------
-
- The core code exports extra information via sysfs in the directory
- devices/system/cpu/cpu0/arch-freq.
-
-
-Board Support
--------------
-
- Each board that wants to use the cpufreq code must register some basic
- information with the core driver to provide information about what the
- board requires and any restrictions being placed on it.
-
- The board needs to supply information about whether it needs the IO bank
- timings changing, any maximum frequency limits and information about the
- SDRAM refresh rate.
-
-
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2009 Simtec Electronics
-Licensed under GPLv2
diff --git a/Documentation/arm/samsung-s3c24xx/eb2410itx.rst b/Documentation/arm/samsung-s3c24xx/eb2410itx.rst
deleted file mode 100644
index 7863c93652f8..000000000000
--- a/Documentation/arm/samsung-s3c24xx/eb2410itx.rst
+++ /dev/null
@@ -1,59 +0,0 @@
-===================================
-Simtec Electronics EB2410ITX (BAST)
-===================================
-
-	http://www.simtec.co.uk/products/EB2410ITX/
-
-Introduction
-------------
-
-  The EB2410ITX is a S3C2410 based development board with a variety of
-  peripherals and expansion connectors. This board is also known by
-  the shortened name of Bast.
-
-
-Configuration
--------------
-
-  To set the default configuration, use `make bast_defconfig` which
-  supports the commonly used features of this board.
-
-
-Support
--------
-
-  Official support information can be found on the Simtec Electronics
-  website, at the product page http://www.simtec.co.uk/products/EB2410ITX/
-
-  Useful links:
-
-    - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html
-
-    - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html
-
-    - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html
-      and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html
-
-
-MTD
----
-
-  The NAND and NOR support has been merged from the linux-mtd project.
-  Any problems, see http://www.linux-mtd.infradead.org/ for more
-  information or up-to-date versions of linux-mtd.
-
-
-IDE
----
-
-  Both onboard IDE ports are supported, however there is no support for
-  changing speed of devices, PIO Mode 4 capable drives should be used.
-
-
-Maintainers
------------
-
-  This board is maintained by Simtec Electronics.
-
-
-Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/gpio.rst b/Documentation/arm/samsung-s3c24xx/gpio.rst
deleted file mode 100644
index f4a8c800a457..000000000000
--- a/Documentation/arm/samsung-s3c24xx/gpio.rst
+++ /dev/null
@@ -1,172 +0,0 @@
-====================
-S3C24XX GPIO Control
-====================
-
-Introduction
-------------
-
-  The s3c2410 kernel provides an interface to configure and
-  manipulate the state of the GPIO pins, and find out other
-  information about them.
-
-  There are a number of conditions attached to the configuration
-  of the s3c2410 GPIO system, please read the Samsung provided
-  data-sheet/users manual to find out the complete list.
-
-  See Documentation/arm/samsung/gpio.rst for the core implementation.
-
-
-GPIOLIB
--------
-
-  With the event of the GPIOLIB in drivers/gpio, support for some
-  of the GPIO functions such as reading and writing a pin will
-  be removed in favour of this common access method.
-
-  Once all the extant drivers have been converted, the functions
-  listed below will be removed (they may be marked as __deprecated
-  in the near future).
-
-  The following functions now either have a `s3c_` specific variant
-  or are merged into gpiolib. See the definitions in
-  arch/arm/mach-s3c/gpio-cfg.h:
-
-  - s3c2410_gpio_setpin()	gpio_set_value() or gpio_direction_output()
-  - s3c2410_gpio_getpin()	gpio_get_value() or gpio_direction_input()
-  - s3c2410_gpio_getirq()	gpio_to_irq()
-  - s3c2410_gpio_cfgpin()	s3c_gpio_cfgpin()
-  - s3c2410_gpio_getcfg()	s3c_gpio_getcfg()
-  - s3c2410_gpio_pullup()	s3c_gpio_setpull()
-
-
-GPIOLIB conversion
-------------------
-
-If you need to convert your board or driver to use gpiolib from the phased
-out s3c2410 API, then here are some notes on the process.
-
-1) If your board is exclusively using an GPIO, say to control peripheral
-   power, then it will require to claim the gpio with gpio_request() before
-   it can use it.
-
-   It is recommended to check the return value, with at least WARN_ON()
-   during initialisation.
-
-2) The s3c2410_gpio_cfgpin() can be directly replaced with s3c_gpio_cfgpin()
-   as they have the same arguments, and can either take the pin specific
-   values, or the more generic special-function-number arguments.
-
-3) s3c2410_gpio_pullup() changes have the problem that while the
-   s3c2410_gpio_pullup(x, 1) can be easily translated to the
-   s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0)
-   are not so easy.
-
-   The s3c2410_gpio_pullup(x, 0) case enables the pull-up (or in the case
-   of some of the devices, a pull-down) and as such the new API distinguishes
-   between the UP and DOWN case. There is currently no 'just turn on' setting
-   which may be required if this becomes a problem.
-
-4) s3c2410_gpio_setpin() can be replaced by gpio_set_value(), the old call
-   does not implicitly configure the relevant gpio to output. The gpio
-   direction should be changed before using gpio_set_value().
-
-5) s3c2410_gpio_getpin() is replaceable by gpio_get_value() if the pin
-   has been set to input. It is currently unknown what the behaviour is
-   when using gpio_get_value() on an output pin (s3c2410_gpio_getpin
-   would return the value the pin is supposed to be outputting).
-
-6) s3c2410_gpio_getirq() should be directly replaceable with the
-   gpio_to_irq() call.
-
-The s3c2410_gpio and `gpio_` calls have always operated on the same gpio
-numberspace, so there is no problem with converting the gpio numbering
-between the calls.
-
-
-Headers
--------
-
-  See arch/arm/mach-s3c/regs-gpio-s3c24xx.h for the list
-  of GPIO pins, and the configuration values for them. This
-  is included by using #include <mach/regs-gpio.h>
-
-
-PIN Numbers
------------
-
-  Each pin has an unique number associated with it in regs-gpio.h,
-  e.g. S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
-  the GPIO functions which pin is to be used.
-
-  With the conversion to gpiolib, there is no longer a direct conversion
-  from gpio pin number to register base address as in earlier kernels. This
-  is due to the number space required for newer SoCs where the later
-  GPIOs are not contiguous.
-
-
-Configuring a pin
------------------
-
-  The following function allows the configuration of a given pin to
-  be changed.
-
-    void s3c_gpio_cfgpin(unsigned int pin, unsigned int function);
-
-  e.g.:
-
-     s3c_gpio_cfgpin(S3C2410_GPA(0), S3C_GPIO_SFN(1));
-     s3c_gpio_cfgpin(S3C2410_GPE(8), S3C_GPIO_SFN(2));
-
-   which would turn GPA(0) into the lowest Address line A0, and set
-   GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
-
-
-Reading the current configuration
----------------------------------
-
-  The current configuration of a pin can be read by using standard
-  gpiolib function:
-
-  s3c_gpio_getcfg(unsigned int pin);
-
-  The return value will be from the same set of values which can be
-  passed to s3c_gpio_cfgpin().
-
-
-Configuring a pull-up resistor
-------------------------------
-
-  A large proportion of the GPIO pins on the S3C2410 can have weak
-  pull-up resistors enabled. This can be configured by the following
-  function:
-
-    void s3c_gpio_setpull(unsigned int pin, unsigned int to);
-
-  Where the to value is S3C_GPIO_PULL_NONE to set the pull-up off,
-  and S3C_GPIO_PULL_UP to enable the specified pull-up. Any other
-  values are currently undefined.
-
-
-Getting and setting the state of a PIN
---------------------------------------
-
-  These calls are now implemented by the relevant gpiolib calls, convert
-  your board or driver to use gpiolib.
-
-
-Getting the IRQ number associated with a PIN
---------------------------------------------
-
-  A standard gpiolib function can map the given pin number to an IRQ
-  number to pass to the IRQ system.
-
-   int gpio_to_irq(unsigned int pin);
-
-  Note, not all pins have an IRQ.
-
-
-Author
--------
-
-Ben Dooks, 03 October 2004
-Copyright 2004 Ben Dooks, Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/h1940.rst b/Documentation/arm/samsung-s3c24xx/h1940.rst
deleted file mode 100644
index 62a562c178e3..000000000000
--- a/Documentation/arm/samsung-s3c24xx/h1940.rst
+++ /dev/null
@@ -1,41 +0,0 @@
-=============
-HP IPAQ H1940
-=============
-
-http://www.handhelds.org/projects/h1940.html
-
-Introduction
-------------
-
-  The HP H1940 is a S3C2410 based handheld device, with
-  bluetooth connectivity.
-
-
-Support
--------
-
-  A variety of information is available
-
-  handhelds.org project page:
-
-    http://www.handhelds.org/projects/h1940.html
-
-  handhelds.org wiki page:
-
-    http://handhelds.org/moin/moin.cgi/HpIpaqH1940
-
-  Herbert Pötzl pages:
-
-    http://vserver.13thfloor.at/H1940/
-
-
-Maintainers
------------
-
-  This project is being maintained and developed by a variety
-  of people, including Ben Dooks, Arnaud Patard, and Herbert Pötzl.
-
-  Thanks to the many others who have also provided support.
-
-
-(c) 2005 Ben Dooks
diff --git a/Documentation/arm/samsung-s3c24xx/index.rst b/Documentation/arm/samsung-s3c24xx/index.rst
deleted file mode 100644
index ccb951a0bedb..000000000000
--- a/Documentation/arm/samsung-s3c24xx/index.rst
+++ /dev/null
@@ -1,20 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-==========================
-Samsung S3C24XX SoC Family
-==========================
-
-.. toctree::
-   :maxdepth: 1
-
-   h1940
-   gpio
-   cpufreq
-   suspend
-   usb-host
-   s3c2412
-   eb2410itx
-   nand
-   smdk2440
-   s3c2413
-   overview
diff --git a/Documentation/arm/samsung-s3c24xx/nand.rst b/Documentation/arm/samsung-s3c24xx/nand.rst
deleted file mode 100644
index 938995694ee7..000000000000
--- a/Documentation/arm/samsung-s3c24xx/nand.rst
+++ /dev/null
@@ -1,30 +0,0 @@
-====================
-S3C24XX NAND Support
-====================
-
-Introduction
-------------
-
-Small Page NAND
----------------
-
-The driver uses a 512 byte (1 page) ECC code for this setup. The
-ECC code is not directly compatible with the default kernel ECC
-code, so the driver enforces its own OOB layout and ECC parameters
-
-Large Page NAND
----------------
-
-The driver is capable of handling NAND flash with a 2KiB page
-size, with support for hardware ECC generation and correction.
-
-Unlike the 512byte page mode, the driver generates ECC data for
-each 256 byte block in an 2KiB page. This means that more than
-one error in a page can be rectified. It also means that the
-OOB layout remains the default kernel layout for these flashes.
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2007 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/overview.rst b/Documentation/arm/samsung-s3c24xx/overview.rst
deleted file mode 100644
index 14535e5cffb7..000000000000
--- a/Documentation/arm/samsung-s3c24xx/overview.rst
+++ /dev/null
@@ -1,311 +0,0 @@
-==========================
-S3C24XX ARM Linux Overview
-==========================
-
-
-
-Introduction
-------------
-
-  The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
-  by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
-  S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 devices
-  are supported.
-
-  Support for the S3C2400 and S3C24A0 series was never completed and the
-  corresponding code has been removed after a while.  If someone wishes to
-  revive this effort, partial support can be retrieved from earlier Linux
-  versions.
-
-  The S3C2416 and S3C2450 devices are very similar and S3C2450 support is
-  included under the arch/arm/mach-s3c directory. Note, while core
-  support for these SoCs is in, work on some of the extra peripherals
-  and extra interrupts is still ongoing.
-
-
-Configuration
--------------
-
-  A generic S3C2410 configuration is provided, and can be used as the
-  default by `make s3c2410_defconfig`. This configuration has support
-  for all the machines, and the commonly used features on them.
-
-  Certain machines may have their own default configurations as well,
-  please check the machine specific documentation.
-
-
-Layout
-------
-
-  The core support files, register, kernel and paltform data are located in the
-  platform code contained in arch/arm/mach-s3c with headers in
-  arch/arm/mach-s3c/include
-
-arch/arm/mach-s3c:
-
-  Files in here are either common to all the s3c24xx family,
-  or are common to only some of them with names to indicate this
-  status. The files that are not common to all are generally named
-  with the initial cpu they support in the series to ensure a short
-  name without any possibility of confusion with newer devices.
-
-  As an example, initially s3c244x would cover s3c2440 and s3c2442, but
-  with the s3c2443 which does not share many of the same drivers in
-  this directory, the name becomes invalid. We stick to s3c2440-<x>
-  to indicate a driver that is s3c2440 and s3c2442 compatible.
-
-  This does mean that to find the status of any given SoC, a number
-  of directories may need to be searched.
-
-
-Machines
---------
-
-  The currently supported machines are as follows:
-
-  Simtec Electronics EB2410ITX (BAST)
-
-    A general purpose development board, see EB2410ITX.txt for further
-    details
-
-  Simtec Electronics IM2440D20 (Osiris)
-
-    CPU Module from Simtec Electronics, with a S3C2440A CPU, nand flash
-    and a PCMCIA controller.
-
-  Samsung SMDK2410
-
-    Samsung's own development board, geared for PDA work.
-
-  Samsung/Aiji SMDK2412
-
-    The S3C2412 version of the SMDK2440.
-
-  Samsung/Aiji SMDK2413
-
-    The S3C2412 version of the SMDK2440.
-
-  Samsung/Meritech SMDK2440
-
-    The S3C2440 compatible version of the SMDK2440, which has the
-    option of an S3C2440 or S3C2442 CPU module.
-
-  Thorcom VR1000
-
-    Custom embedded board
-
-  HP IPAQ 1940
-
-    Handheld (IPAQ), available in several varieties
-
-  HP iPAQ rx3715
-
-    S3C2440 based IPAQ, with a number of variations depending on
-    features shipped.
-
-  Acer N30
-
-    A S3C2410 based PDA from Acer.  There is a Wiki page at
-    http://handhelds.org/moin/moin.cgi/AcerN30Documentation .
-
-  AML M5900
-
-    American Microsystems' M5900
-
-  Nex Vision Nexcoder
-  Nex Vision Otom
-
-    Two machines by Nex Vision
-
-
-Adding New Machines
--------------------
-
-  The architecture has been designed to support as many machines as can
-  be configured for it in one kernel build, and any future additions
-  should keep this in mind before altering items outside of their own
-  machine files.
-
-  Machine definitions should be kept in arch/arm/mach-s3c,
-  and there are a number of examples that can be looked at.
-
-  Read the kernel patch submission policies as well as the
-  Documentation/arm directory before submitting patches. The
-  ARM kernel series is managed by Russell King, and has a patch system
-  located at http://www.arm.linux.org.uk/developer/patches/
-  as well as mailing lists that can be found from the same site.
-
-  As a courtesy, please notify <ben-linux@fluff.org> of any new
-  machines or other modifications.
-
-  Any large scale modifications, or new drivers should be discussed
-  on the ARM kernel mailing list (linux-arm-kernel) before being
-  attempted. See http://www.arm.linux.org.uk/mailinglists/ for the
-  mailing list information.
-
-
-I2C
----
-
-  The hardware I2C core in the CPU is supported in single master
-  mode, and can be configured via platform data.
-
-
-RTC
----
-
-  Support for the onboard RTC unit, including alarm function.
-
-  This has recently been upgraded to use the new RTC core,
-  and the module has been renamed to rtc-s3c to fit in with
-  the new rtc naming scheme.
-
-
-Watchdog
---------
-
-  The onchip watchdog is available via the standard watchdog
-  interface.
-
-
-NAND
-----
-
-  The current kernels now have support for the s3c2410 NAND
-  controller. If there are any problems the latest linux-mtd
-  code can be found from http://www.linux-mtd.infradead.org/
-
-  For more information see Documentation/arm/samsung-s3c24xx/nand.rst
-
-
-SD/MMC
-------
-
-  The SD/MMC hardware pre S3C2443 is supported in the current
-  kernel, the driver is drivers/mmc/host/s3cmci.c and supports
-  1 and 4 bit SD or MMC cards.
-
-  The SDIO behaviour of this driver has not been fully tested. There is no
-  current support for hardware SDIO interrupts.
-
-
-Serial
-------
-
-  The s3c2410 serial driver provides support for the internal
-  serial ports. These devices appear as /dev/ttySAC0 through 3.
-
-  To create device nodes for these, use the following commands
-
-    mknod ttySAC0 c 204 64
-    mknod ttySAC1 c 204 65
-    mknod ttySAC2 c 204 66
-
-
-GPIO
-----
-
-  The core contains support for manipulating the GPIO, see the
-  documentation in GPIO.txt in the same directory as this file.
-
-  Newer kernels carry GPIOLIB, and support is being moved towards
-  this with some of the older support in line to be removed.
-
-  As of v2.6.34, the move towards using gpiolib support is almost
-  complete, and very little of the old calls are left.
-
-  See Documentation/arm/samsung-s3c24xx/gpio.rst for the S3C24XX specific
-  support and Documentation/arm/samsung/gpio.rst for the core Samsung
-  implementation.
-
-
-Clock Management
-----------------
-
-  The core provides the interface defined in the header file
-  include/asm-arm/hardware/clock.h, to allow control over the
-  various clock units
-
-
-Suspend to RAM
---------------
-
-  For boards that provide support for suspend to RAM, the
-  system can be placed into low power suspend.
-
-  See Suspend.txt for more information.
-
-
-SPI
----
-
-  SPI drivers are available for both the in-built hardware
-  (although there is no DMA support yet) and a generic
-  GPIO based solution.
-
-
-LEDs
-----
-
-  There is support for GPIO based LEDs via a platform driver
-  in the LED subsystem.
-
-
-Platform Data
--------------
-
-  Whenever a device has platform specific data that is specified
-  on a per-machine basis, care should be taken to ensure the
-  following:
-
-    1) that default data is not left in the device to confuse the
-       driver if a machine does not set it at startup
-
-    2) the data should (if possible) be marked as __initdata,
-       to ensure that the data is thrown away if the machine is
-       not the one currently in use.
-
-       The best way of doing this is to make a function that
-       kmalloc()s an area of memory, and copies the __initdata
-       and then sets the relevant device's platform data. Making
-       the function `__init` takes care of ensuring it is discarded
-       with the rest of the initialisation code::
-
-         static __init void s3c24xx_xxx_set_platdata(struct xxx_data *pd)
-         {
-             struct s3c2410_xxx_mach_info *npd;
-
-	   npd = kmalloc(sizeof(struct s3c2410_xxx_mach_info), GFP_KERNEL);
-	   if (npd) {
-	      memcpy(npd, pd, sizeof(struct s3c2410_xxx_mach_info));
-	      s3c_device_xxx.dev.platform_data = npd;
-	   } else {
-                printk(KERN_ERR "no memory for xxx platform data\n");
-	   }
-	}
-
-	Note, since the code is marked as __init, it should not be
-	exported outside arch/arm/mach-s3c/, or exported to
-	modules via EXPORT_SYMBOL() and related functions.
-
-
-Port Contributors
------------------
-
-  Ben Dooks (BJD)
-  Vincent Sanders
-  Herbert Potzl
-  Arnaud Patard (RTP)
-  Roc Wu
-  Klaus Fetscher
-  Dimitry Andric
-  Shannon Holland
-  Guillaume Gourat (NexVision)
-  Christer Weinigel (wingel) (Acer N30)
-  Lucas Correia Villa Real (S3C2400 port)
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2004-2006 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/s3c2412.rst b/Documentation/arm/samsung-s3c24xx/s3c2412.rst
deleted file mode 100644
index 68b985fc6bf4..000000000000
--- a/Documentation/arm/samsung-s3c24xx/s3c2412.rst
+++ /dev/null
@@ -1,121 +0,0 @@
-==========================
-S3C2412 ARM Linux Overview
-==========================
-
-Introduction
-------------
-
-  The S3C2412 is part of the S3C24XX range of ARM9 System-on-Chip CPUs
-  from Samsung. This part has an ARM926-EJS core, capable of running up
-  to 266MHz (see data-sheet for more information)
-
-
-Clock
------
-
-  The core clock code provides a set of clocks to the drivers, and allows
-  for source selection and a number of other features.
-
-
-Power
------
-
-  No support for suspend/resume to RAM in the current system.
-
-
-DMA
----
-
-  No current support for DMA.
-
-
-GPIO
-----
-
-  There is support for setting the GPIO to input/output/special function
-  and reading or writing to them.
-
-
-UART
-----
-
-  The UART hardware is similar to the S3C2440, and is supported by the
-  s3c2410 driver in the drivers/serial directory.
-
-
-NAND
-----
-
-  The NAND hardware is similar to the S3C2440, and is supported by the
-  s3c2410 driver in the drivers/mtd/nand/raw directory.
-
-
-USB Host
---------
-
-  The USB hardware is similar to the S3C2410, with extended clock source
-  control. The OHCI portion is supported by the ohci-s3c2410 driver, and
-  the clock control selection is supported by the core clock code.
-
-
-USB Device
-----------
-
-  No current support in the kernel
-
-
-IRQs
-----
-
-  All the standard, and external interrupt sources are supported. The
-  extra sub-sources are not yet supported.
-
-
-RTC
----
-
-  The RTC hardware is similar to the S3C2410, and is supported by the
-  s3c2410-rtc driver.
-
-
-Watchdog
---------
-
-  The watchdog hardware is the same as the S3C2410, and is supported by
-  the s3c2410_wdt driver.
-
-
-MMC/SD/SDIO
------------
-
-  No current support for the MMC/SD/SDIO block.
-
-IIC
----
-
-  The IIC hardware is the same as the S3C2410, and is supported by the
-  i2c-s3c24xx driver.
-
-
-IIS
----
-
-  No current support for the IIS interface.
-
-
-SPI
----
-
-  No current support for the SPI interfaces.
-
-
-ATA
----
-
-  No current support for the on-board ATA block.
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/s3c2413.rst b/Documentation/arm/samsung-s3c24xx/s3c2413.rst
deleted file mode 100644
index 1f51e207fc46..000000000000
--- a/Documentation/arm/samsung-s3c24xx/s3c2413.rst
+++ /dev/null
@@ -1,22 +0,0 @@
-==========================
-S3C2413 ARM Linux Overview
-==========================
-
-Introduction
-------------
-
-  The S3C2413 is an extended version of the S3C2412, with an camera
-  interface and mobile DDR memory support. See the S3C2412 support
-  documentation for more information.
-
-
-Camera Interface
-----------------
-
-  This block is currently not supported.
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2006 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/smdk2440.rst b/Documentation/arm/samsung-s3c24xx/smdk2440.rst
deleted file mode 100644
index 524fd0b4afaf..000000000000
--- a/Documentation/arm/samsung-s3c24xx/smdk2440.rst
+++ /dev/null
@@ -1,57 +0,0 @@
-=========================
-Samsung/Meritech SMDK2440
-=========================
-
-Introduction
-------------
-
-  The SMDK2440 is a two part evaluation board for the Samsung S3C2440
-  processor. It includes support for LCD, SmartMedia, Audio, SD and
-  10MBit Ethernet, and expansion headers for various signals, including
-  the camera and unused GPIO.
-
-
-Configuration
--------------
-
-  To set the default configuration, use `make smdk2440_defconfig` which
-  will configure the common features of this board, or use
-  `make s3c2410_config` to include support for all s3c2410/s3c2440 machines
-
-
-Support
--------
-
-  Ben Dooks' SMDK2440 site at http://www.fluff.org/ben/smdk2440/ which
-  includes linux based USB download tools.
-
-  Some of the h1940 patches that can be found from the H1940 project
-  site at http://www.handhelds.org/projects/h1940.html can also be
-  applied to this board.
-
-
-Peripherals
------------
-
-  There is no current support for any of the extra peripherals on the
-  base-board itself.
-
-
-MTD
----
-
-  The NAND flash should be supported by the in kernel MTD NAND support,
-  NOR flash will be added later.
-
-
-Maintainers
------------
-
-  This board is being maintained by Ben Dooks, for more info, see
-  http://www.fluff.org/ben/smdk2440/
-
-  Many thanks to Dimitry Andric of TomTom for the loan of the SMDK2440,
-  and to Simtec Electronics for allowing me time to work on this.
-
-
-(c) 2004 Ben Dooks
diff --git a/Documentation/arm/samsung-s3c24xx/suspend.rst b/Documentation/arm/samsung-s3c24xx/suspend.rst
deleted file mode 100644
index b4f3ae9fe76e..000000000000
--- a/Documentation/arm/samsung-s3c24xx/suspend.rst
+++ /dev/null
@@ -1,137 +0,0 @@
-=======================
-S3C24XX Suspend Support
-=======================
-
-
-Introduction
-------------
-
-  The S3C24XX supports a low-power suspend mode, where the SDRAM is kept
-  in Self-Refresh mode, and all but the essential peripheral blocks are
-  powered down. For more information on how this works, please look
-  at the relevant CPU datasheet from Samsung.
-
-
-Requirements
-------------
-
-  1) A bootloader that can support the necessary resume operation
-
-  2) Support for at least 1 source for resume
-
-  3) CONFIG_PM enabled in the kernel
-
-  4) Any peripherals that are going to be powered down at the same
-     time require suspend/resume support.
-
-
-Resuming
---------
-
-  The S3C2410 user manual defines the process of sending the CPU to
-  sleep and how it resumes. The default behaviour of the Linux code
-  is to set the GSTATUS3 register to the physical address of the
-  code to resume Linux operation.
-
-  GSTATUS4 is currently left alone by the sleep code, and is free to
-  use for any other purposes (for example, the EB2410ITX uses this to
-  save memory configuration in).
-
-
-Machine Support
----------------
-
-  The machine specific functions must call the s3c_pm_init() function
-  to say that its bootloader is capable of resuming. This can be as
-  simple as adding the following to the machine's definition:
-
-  INITMACHINE(s3c_pm_init)
-
-  A board can do its own setup before calling s3c_pm_init, if it
-  needs to setup anything else for power management support.
-
-  There is currently no support for over-riding the default method of
-  saving the resume address, if your board requires it, then contact
-  the maintainer and discuss what is required.
-
-  Note, the original method of adding an late_initcall() is wrong,
-  and will end up initialising all compiled machines' pm init!
-
-  The following is an example of code used for testing wakeup from
-  an falling edge on IRQ_EINT0::
-
-
-    static irqreturn_t button_irq(int irq, void *pw)
-    {
-	return IRQ_HANDLED;
-    }
-
-    statuc void __init machine_init(void)
-    {
-	...
-
-	request_irq(IRQ_EINT0, button_irq, IRQF_TRIGGER_FALLING,
-		   "button-irq-eint0", NULL);
-
-	enable_irq_wake(IRQ_EINT0);
-
-	s3c_pm_init();
-    }
-
-
-Debugging
----------
-
-  There are several important things to remember when using PM suspend:
-
-  1) The uart drivers will disable the clocks to the UART blocks when
-     suspending, which means that use of printascii() or similar direct
-     access to the UARTs will cause the debug to stop.
-
-  2) While the pm code itself will attempt to re-enable the UART clocks,
-     care should be taken that any external clock sources that the UARTs
-     rely on are still enabled at that point.
-
-  3) If any debugging is placed in the resume path, then it must have the
-     relevant clocks and peripherals setup before use (ie, bootloader).
-
-     For example, if you transmit a character from the UART, the baud
-     rate and uart controls must be setup beforehand.
-
-
-Configuration
--------------
-
-  The S3C2410 specific configuration in `System Type` defines various
-  aspects of how the S3C2410 suspend and resume support is configured
-
-  `S3C2410 PM Suspend debug`
-
-    This option prints messages to the serial console before and after
-    the actual suspend, giving detailed information on what is
-    happening
-
-
-  `S3C2410 PM Suspend Memory CRC`
-
-    Allows the entire memory to be checksummed before and after the
-    suspend to see if there has been any corruption of the contents.
-
-    Note, the time to calculate the CRC is dependent on the CPU speed
-    and the size of memory. For an 64Mbyte RAM area on an 200MHz
-    S3C2410, this can take approximately 4 seconds to complete.
-
-    This support requires the CRC32 function to be enabled.
-
-
-  `S3C2410 PM Suspend CRC Chunksize (KiB)`
-
-    Defines the size of memory each CRC chunk covers. A smaller value
-    will mean that the CRC data block will take more memory, but will
-    identify any faults with better precision
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2004 Simtec Electronics
diff --git a/Documentation/arm/samsung-s3c24xx/usb-host.rst b/Documentation/arm/samsung-s3c24xx/usb-host.rst
deleted file mode 100644
index 7aaffac89e04..000000000000
--- a/Documentation/arm/samsung-s3c24xx/usb-host.rst
+++ /dev/null
@@ -1,91 +0,0 @@
-========================
-S3C24XX USB Host support
-========================
-
-
-
-Introduction
-------------
-
-  This document details the S3C2410/S3C2440 in-built OHCI USB host support.
-
-Configuration
--------------
-
-  Enable at least the following kernel options:
-
-  menuconfig::
-
-   Device Drivers  --->
-     USB support  --->
-       <*> Support for Host-side USB
-       <*>   OHCI HCD support
-
-
-  .config:
-
-    - CONFIG_USB
-    - CONFIG_USB_OHCI_HCD
-
-
-  Once these options are configured, the standard set of USB device
-  drivers can be configured and used.
-
-
-Board Support
--------------
-
-  The driver attaches to a platform device, which will need to be
-  added by the board specific support file in arch/arm/mach-s3c,
-  such as mach-bast.c or mach-smdk2410.c
-
-  The platform device's platform_data field is only needed if the
-  board implements extra power control or over-current monitoring.
-
-  The OHCI driver does not ensure the state of the S3C2410's MISCCTRL
-  register, so if both ports are to be used for the host, then it is
-  the board support file's responsibility to ensure that the second
-  port is configured to be connected to the OHCI core.
-
-
-Platform Data
--------------
-
-  See include/linux/platform_data/usb-ohci-s3c2410.h for the
-  descriptions of the platform device data. An implementation
-  can be found in arch/arm/mach-s3c/simtec-usb.c .
-
-  The `struct s3c2410_hcd_info` contains a pair of functions
-  that get called to enable over-current detection, and to
-  control the port power status.
-
-  The ports are numbered 0 and 1.
-
-  power_control:
-    Called to enable or disable the power on the port.
-
-  enable_oc:
-    Called to enable or disable the over-current monitoring.
-    This should claim or release the resources being used to
-    check the power condition on the port, such as an IRQ.
-
-  report_oc:
-    The OHCI driver fills this field in for the over-current code
-    to call when there is a change to the over-current state on
-    an port. The ports argument is a bitmask of 1 bit per port,
-    with bit X being 1 for an over-current on port X.
-
-    The function s3c2410_usb_report_oc() has been provided to
-    ensure this is called correctly.
-
-  port[x]:
-    This is struct describes each port, 0 or 1. The platform driver
-    should set the flags field of each port to S3C_HCDFLG_USED if
-    the port is enabled.
-
-
-
-Document Author
----------------
-
-Ben Dooks, Copyright 2005 Simtec Electronics
diff --git a/Documentation/arm/samsung/gpio.rst b/Documentation/arm/samsung/gpio.rst
index f6e27b07c993..27fae0d50361 100644
--- a/Documentation/arm/samsung/gpio.rst
+++ b/Documentation/arm/samsung/gpio.rst
@@ -9,14 +9,6 @@ This outlines the Samsung GPIO implementation and the architecture
 specific calls provided alongside the drivers/gpio core.
 
 
-S3C24XX (Legacy)
-----------------
-
-See Documentation/arm/samsung-s3c24xx/gpio.rst for more information
-about these devices. Their implementation has been brought into line
-with the core samsung implementation described in this document.
-
-
 GPIOLIB integration
 -------------------
 
diff --git a/Documentation/arm/samsung/overview.rst b/Documentation/arm/samsung/overview.rst
index e74307897416..8b15a190169b 100644
--- a/Documentation/arm/samsung/overview.rst
+++ b/Documentation/arm/samsung/overview.rst
@@ -12,21 +12,10 @@ Introduction
 
   The currently supported SoCs are:
 
-  - S3C24XX: See Documentation/arm/samsung-s3c24xx/overview.rst for full list
   - S3C64XX: S3C6400 and S3C6410
   - S5PC110 / S5PV210
 
 
-S3C24XX Systems
----------------
-
-  There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which
-  deals with the architecture and drivers specific to these devices.
-
-  See Documentation/arm/samsung-s3c24xx/overview.rst for more information
-  on the implementation details and specific support.
-
-
 Configuration
 -------------
 
@@ -51,8 +40,6 @@ Layout
   specific information. It contains the base clock, GPIO and device definitions
   to get the system running.
 
-  plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
-
   plat-s5p is for s5p specific builds, and contains common support for the
   S5P specific systems. Not all S5Ps use all the features in this directory
   due to differences in the hardware.
diff --git a/Documentation/arm/sti/overview.rst b/Documentation/arm/sti/overview.rst
index 70743617a74f..ae16aced800f 100644
--- a/Documentation/arm/sti/overview.rst
+++ b/Documentation/arm/sti/overview.rst
@@ -7,22 +7,18 @@ Introduction
 
   The ST Microelectronics Multimedia and Application Processors range of
   CortexA9 System-on-Chip are supported by the 'STi' platform of
-  ARM Linux. Currently STiH415, STiH416 SOCs are supported with both
-  B2000 and B2020 Reference boards.
+  ARM Linux. Currently STiH407, STiH410 and STiH418 are supported.
 
 
 configuration
 -------------
 
-  A generic configuration is provided for both STiH415/416, and can be used as the
-  default by::
-
-	make stih41x_defconfig
+  The configuration for the STi platform is supported via the multi_v7_defconfig.
 
 Layout
 ------
 
-  All the files for multiple machine families (STiH415, STiH416, and STiG125)
+  All the files for multiple machine families (STiH407, STiH410, and STiH418)
   are located in the platform code contained in arch/arm/mach-sti
 
   There is a generic board board-dt.c in the mach folder which support
diff --git a/Documentation/arm/sti/stih415-overview.rst b/Documentation/arm/sti/stih415-overview.rst
deleted file mode 100644
index b67452d610c4..000000000000
--- a/Documentation/arm/sti/stih415-overview.rst
+++ /dev/null
@@ -1,14 +0,0 @@
-================
-STiH415 Overview
-================
-
-Introduction
-------------
-
-    The STiH415 is the next generation of HD, AVC set-top box processors
-    for satellite, cable, terrestrial and IP-STB markets.
-
-    Features:
-
-    - ARM Cortex-A9 1.0 GHz, dual-core CPU
-    - SATA2x2,USB 2.0x3, PCIe, Gbit Ethernet MACx2
diff --git a/Documentation/arm/sti/stih416-overview.rst b/Documentation/arm/sti/stih416-overview.rst
deleted file mode 100644
index 93f17d74d8db..000000000000
--- a/Documentation/arm/sti/stih416-overview.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-================
-STiH416 Overview
-================
-
-Introduction
-------------
-
-    The STiH416 is the next generation of HD, AVC set-top box processors
-    for satellite, cable, terrestrial and IP-STB markets.
-
-    Features
-    - ARM Cortex-A9 1.2 GHz dual core CPU
-    - SATA2x2,USB 2.0x3, PCIe, Gbit Ethernet MACx2
diff --git a/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
new file mode 100644
index 000000000000..2945e0e33104
--- /dev/null
+++ b/Documentation/arm/stm32/stm32-dma-mdma-chaining.rst
@@ -0,0 +1,415 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+STM32 DMA-MDMA chaining
+=======================
+
+
+Introduction
+------------
+
+  This document describes the STM32 DMA-MDMA chaining feature. But before going
+  further, let's introduce the peripherals involved.
+
+  To offload data transfers from the CPU, STM32 microprocessors (MPUs) embed
+  direct memory access controllers (DMA).
+
+  STM32MP1 SoCs embed both STM32 DMA and STM32 MDMA controllers. STM32 DMA
+  request routing capabilities are enhanced by a DMA request multiplexer
+  (STM32 DMAMUX).
+
+  **STM32 DMAMUX**
+
+  STM32 DMAMUX routes any DMA request from a given peripheral to any STM32 DMA
+  controller (STM32MP1 counts two STM32 DMA controllers) channels.
+
+  **STM32 DMA**
+
+  STM32 DMA is mainly used to implement central data buffer storage (usually in
+  the system SRAM) for different peripheral. It can access external RAMs but
+  without the ability to generate convenient burst transfer ensuring the best
+  load of the AXI.
+
+  **STM32 MDMA**
+
+  STM32 MDMA (Master DMA) is mainly used to manage direct data transfers between
+  RAM data buffers without CPU intervention. It can also be used in a
+  hierarchical structure that uses STM32 DMA as first level data buffer
+  interfaces for AHB peripherals, while the STM32 MDMA acts as a second level
+  DMA with better performance. As a AXI/AHB master, STM32 MDMA can take control
+  of the AXI/AHB bus.
+
+
+Principles
+----------
+
+  STM32 DMA-MDMA chaining feature relies on the strengths of STM32 DMA and
+  STM32 MDMA controllers.
+
+  STM32 DMA has a circular Double Buffer Mode (DBM). At each end of transaction
+  (when DMA data counter - DMA_SxNDTR - reaches 0), the memory pointers
+  (configured with DMA_SxSM0AR and DMA_SxM1AR) are swapped and the DMA data
+  counter is automatically reloaded. This allows the SW or the STM32 MDMA to
+  process one memory area while the second memory area is being filled/used by
+  the STM32 DMA transfer.
+
+  With STM32 MDMA linked-list mode, a single request initiates the data array
+  (collection of nodes) to be transferred until the linked-list pointer for the
+  channel is null. The channel transfer complete of the last node is the end of
+  transfer, unless first and last nodes are linked to each other, in such a
+  case, the linked-list loops on to create a circular MDMA transfer.
+
+  STM32 MDMA has direct connections with STM32 DMA. This enables autonomous
+  communication and synchronization between peripherals, thus saving CPU
+  resources and bus congestion. Transfer Complete signal of STM32 DMA channel
+  can triggers STM32 MDMA transfer. STM32 MDMA can clear the request generated
+  by the STM32 DMA by writing to its Interrupt Clear register (whose address is
+  stored in MDMA_CxMAR, and bit mask in MDMA_CxMDR).
+
+  .. table:: STM32 MDMA interconnect table with STM32 DMA
+
+    +--------------+----------------+-----------+------------+
+    | STM32 DMAMUX | STM32 DMA      | STM32 DMA | STM32 MDMA |
+    | channels     | channels       | Transfer  | request    |
+    |              |                | complete  |            |
+    |              |                | signal    |            |
+    +==============+================+===========+============+
+    | Channel *0*  | DMA1 channel 0 | dma1_tcf0 | *0x00*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *1*  | DMA1 channel 1 | dma1_tcf1 | *0x01*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *2*  | DMA1 channel 2 | dma1_tcf2 | *0x02*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *3*  | DMA1 channel 3 | dma1_tcf3 | *0x03*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *4*  | DMA1 channel 4 | dma1_tcf4 | *0x04*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *5*  | DMA1 channel 5 | dma1_tcf5 | *0x05*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *6*  | DMA1 channel 6 | dma1_tcf6 | *0x06*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *7*  | DMA1 channel 7 | dma1_tcf7 | *0x07*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *8*  | DMA2 channel 0 | dma2_tcf0 | *0x08*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *9*  | DMA2 channel 1 | dma2_tcf1 | *0x09*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *10* | DMA2 channel 2 | dma2_tcf2 | *0x0A*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *11* | DMA2 channel 3 | dma2_tcf3 | *0x0B*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *12* | DMA2 channel 4 | dma2_tcf4 | *0x0C*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *13* | DMA2 channel 5 | dma2_tcf5 | *0x0D*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *14* | DMA2 channel 6 | dma2_tcf6 | *0x0E*     |
+    +--------------+----------------+-----------+------------+
+    | Channel *15* | DMA2 channel 7 | dma2_tcf7 | *0x0F*     |
+    +--------------+----------------+-----------+------------+
+
+  STM32 DMA-MDMA chaining feature then uses a SRAM buffer. STM32MP1 SoCs embed
+  three fast access static internal RAMs of various size, used for data storage.
+  Due to STM32 DMA legacy (within microcontrollers), STM32 DMA performances are
+  bad with DDR, while they are optimal with SRAM. Hence the SRAM buffer used
+  between STM32 DMA and STM32 MDMA. This buffer is split in two equal periods
+  and STM32 DMA uses one period while STM32 MDMA uses the other period
+  simultaneously.
+  ::
+
+                    dma[1:2]-tcf[0:7]
+                   .----------------.
+     ____________ '    _________     V____________
+    | STM32 DMA  |    /  __|>_  \    | STM32 MDMA |
+    |------------|   |  /     \  |   |------------|
+    | DMA_SxM0AR |<=>| | SRAM  | |<=>| []-[]...[] |
+    | DMA_SxM1AR |   |  \_____/  |   |            |
+    |____________|    \___<|____/    |____________|
+
+  STM32 DMA-MDMA chaining uses (struct dma_slave_config).peripheral_config to
+  exchange the parameters needed to configure MDMA. These parameters are
+  gathered into a u32 array with three values:
+
+  * the STM32 MDMA request (which is actually the DMAMUX channel ID),
+  * the address of the STM32 DMA register to clear the Transfer Complete
+    interrupt flag,
+  * the mask of the Transfer Complete interrupt flag of the STM32 DMA channel.
+
+Device Tree updates for STM32 DMA-MDMA chaining support
+-------------------------------------------------------
+
+  **1. Allocate a SRAM buffer**
+
+    SRAM device tree node is defined in SoC device tree. You can refer to it in
+    your board device tree to define your SRAM pool.
+    ::
+
+          &sram {
+                  my_foo_device_dma_pool: dma-sram@0 {
+                          reg = <0x0 0x1000>;
+                  };
+          };
+
+    Be careful of the start index, in case there are other SRAM consumers.
+    Define your pool size strategically: to optimise chaining, the idea is that
+    STM32 DMA and STM32 MDMA can work simultaneously, on each buffer of the
+    SRAM.
+    If the SRAM period is greater than the expected DMA transfer, then STM32 DMA
+    and STM32 MDMA will work sequentially instead of simultaneously. It is not a
+    functional issue but it is not optimal.
+
+    Don't forget to refer to your SRAM pool in your device node. You need to
+    define a new property.
+    ::
+
+          &my_foo_device {
+                  ...
+                  my_dma_pool = &my_foo_device_dma_pool;
+          };
+
+    Then get this SRAM pool in your foo driver and allocate your SRAM buffer.
+
+  **2. Allocate a STM32 DMA channel and a STM32 MDMA channel**
+
+    You need to define an extra channel in your device tree node, in addition to
+    the one you should already have for "classic" DMA operation.
+
+    This new channel must be taken from STM32 MDMA channels, so, the phandle of
+    the DMA controller to use is the MDMA controller's one.
+    ::
+
+          &my_foo_device {
+                  [...]
+                  my_dma_pool = &my_foo_device_dma_pool;
+                  dmas = <&dmamux1 ...>,                // STM32 DMA channel
+                         <&mdma1 0 0x3 0x1200000a 0 0>; // + STM32 MDMA channel
+          };
+
+    Concerning STM32 MDMA bindings:
+
+    1. The request line number : whatever the value here, it will be overwritten
+    by MDMA driver with the STM32 DMAMUX channel ID passed through
+    (struct dma_slave_config).peripheral_config
+
+    2. The priority level : choose Very High (0x3) so that your channel will
+    take priority other the other during request arbitration
+
+    3. A 32bit mask specifying the DMA channel configuration : source and
+    destination address increment, block transfer with 128 bytes per single
+    transfer
+
+    4. The 32bit value specifying the register to be used to acknowledge the
+    request: it will be overwritten by MDMA driver, with the DMA channel
+    interrupt flag clear register address passed through
+    (struct dma_slave_config).peripheral_config
+
+    5. The 32bit mask specifying the value to be written to acknowledge the
+    request: it will be overwritten by MDMA driver, with the DMA channel
+    Transfer Complete flag passed through
+    (struct dma_slave_config).peripheral_config
+
+Driver updates for STM32 DMA-MDMA chaining support in foo driver
+----------------------------------------------------------------
+
+  **0. (optional) Refactor the original sg_table if dmaengine_prep_slave_sg()**
+
+    In case of dmaengine_prep_slave_sg(), the original sg_table can't be used as
+    is. Two new sg_tables must be created from the original one. One for
+    STM32 DMA transfer (where memory address targets now the SRAM buffer instead
+    of DDR buffer) and one for STM32 MDMA transfer (where memory address targets
+    the DDR buffer).
+
+    The new sg_list items must fit SRAM period length. Here is an example for
+    DMA_DEV_TO_MEM:
+    ::
+
+      /*
+        * Assuming sgl and nents, respectively the initial scatterlist and its
+        * length.
+        * Assuming sram_dma_buf and sram_period, respectively the memory
+        * allocated from the pool for DMA usage, and the length of the period,
+        * which is half of the sram_buf size.
+        */
+      struct sg_table new_dma_sgt, new_mdma_sgt;
+      struct scatterlist *s, *_sgl;
+      dma_addr_t ddr_dma_buf;
+      u32 new_nents = 0, len;
+      int i;
+
+      /* Count the number of entries needed */
+      for_each_sg(sgl, s, nents, i)
+              if (sg_dma_len(s) > sram_period)
+                      new_nents += DIV_ROUND_UP(sg_dma_len(s), sram_period);
+              else
+                      new_nents++;
+
+      /* Create sg table for STM32 DMA channel */
+      ret = sg_alloc_table(&new_dma_sgt, new_nents, GFP_ATOMIC);
+      if (ret)
+              dev_err(dev, "DMA sg table alloc failed\n");
+
+      for_each_sg(new_dma_sgt.sgl, s, new_dma_sgt.nents, i) {
+              _sgl = sgl;
+              sg_dma_len(s) = min(sg_dma_len(_sgl), sram_period);
+              /* Targets the beginning = first half of the sram_buf */
+              s->dma_address = sram_buf;
+              /*
+                * Targets the second half of the sram_buf
+                * for odd indexes of the item of the sg_list
+                */
+              if (i & 1)
+                      s->dma_address += sram_period;
+      }
+
+      /* Create sg table for STM32 MDMA channel */
+      ret = sg_alloc_table(&new_mdma_sgt, new_nents, GFP_ATOMIC);
+      if (ret)
+              dev_err(dev, "MDMA sg_table alloc failed\n");
+
+      _sgl = sgl;
+      len = sg_dma_len(sgl);
+      ddr_dma_buf = sg_dma_address(sgl);
+      for_each_sg(mdma_sgt.sgl, s, mdma_sgt.nents, i) {
+              size_t bytes = min_t(size_t, len, sram_period);
+
+              sg_dma_len(s) = bytes;
+              sg_dma_address(s) = ddr_dma_buf;
+              len -= bytes;
+
+              if (!len && sg_next(_sgl)) {
+                      _sgl = sg_next(_sgl);
+                      len = sg_dma_len(_sgl);
+                      ddr_dma_buf = sg_dma_address(_sgl);
+              } else {
+                      ddr_dma_buf += bytes;
+              }
+      }
+
+    Don't forget to release these new sg_tables after getting the descriptors
+    with dmaengine_prep_slave_sg().
+
+  **1. Set controller specific parameters**
+
+    First, use dmaengine_slave_config() with a struct dma_slave_config to
+    configure STM32 DMA channel. You just have to take care of DMA addresses,
+    the memory address (depending on the transfer direction) must point on your
+    SRAM buffer, and set (struct dma_slave_config).peripheral_size != 0.
+
+    STM32 DMA driver will check (struct dma_slave_config).peripheral_size to
+    determine if chaining is being used or not. If it is used, then STM32 DMA
+    driver fills (struct dma_slave_config).peripheral_config with an array of
+    three u32 : the first one containing STM32 DMAMUX channel ID, the second one
+    the channel interrupt flag clear register address, and the third one the
+    channel Transfer Complete flag mask.
+
+    Then, use dmaengine_slave_config with another struct dma_slave_config to
+    configure STM32 MDMA channel. Take care of DMA addresses, the device address
+    (depending on the transfer direction) must point on your SRAM buffer, and
+    the memory address must point to the buffer originally used for "classic"
+    DMA operation. Use the previous (struct dma_slave_config).peripheral_size
+    and .peripheral_config that have been updated by STM32 DMA driver, to set
+    (struct dma_slave_config).peripheral_size and .peripheral_config of the
+    struct dma_slave_config to configure STM32 MDMA channel.
+    ::
+
+      struct dma_slave_config dma_conf;
+      struct dma_slave_config mdma_conf;
+
+      memset(&dma_conf, 0, sizeof(dma_conf));
+      [...]
+      config.direction = DMA_DEV_TO_MEM;
+      config.dst_addr = sram_dma_buf;        // SRAM buffer
+      config.peripheral_size = 1;            // peripheral_size != 0 => chaining
+
+      dmaengine_slave_config(dma_chan, &dma_config);
+
+      memset(&mdma_conf, 0, sizeof(mdma_conf));
+      config.direction = DMA_DEV_TO_MEM;
+      mdma_conf.src_addr = sram_dma_buf;     // SRAM buffer
+      mdma_conf.dst_addr = rx_dma_buf;       // original memory buffer
+      mdma_conf.peripheral_size = dma_conf.peripheral_size;       // <- dma_conf
+      mdma_conf.peripheral_config = dma_config.peripheral_config; // <- dma_conf
+
+      dmaengine_slave_config(mdma_chan, &mdma_conf);
+
+  **2. Get a descriptor for STM32 DMA channel transaction**
+
+    In the same way you get your descriptor for your "classic" DMA operation,
+    you just have to replace the original sg_list (in case of
+    dmaengine_prep_slave_sg()) with the new sg_list using SRAM buffer, or to
+    replace the original buffer address, length and period (in case of
+    dmaengine_prep_dma_cyclic()) with the new SRAM buffer.
+
+  **3. Get a descriptor for STM32 MDMA channel transaction**
+
+    If you previously get descriptor (for STM32 DMA) with
+
+    * dmaengine_prep_slave_sg(), then use dmaengine_prep_slave_sg() for
+      STM32 MDMA;
+    * dmaengine_prep_dma_cyclic(), then use dmaengine_prep_dma_cyclic() for
+      STM32 MDMA.
+
+    Use the new sg_list using SRAM buffer (in case of dmaengine_prep_slave_sg())
+    or, depending on the transfer direction, either the original DDR buffer (in
+    case of DMA_DEV_TO_MEM) or the SRAM buffer (in case of DMA_MEM_TO_DEV), the
+    source address being previously set with dmaengine_slave_config().
+
+  **4. Submit both transactions**
+
+    Before submitting your transactions, you may need to define on which
+    descriptor you want a callback to be called at the end of the transfer
+    (dmaengine_prep_slave_sg()) or the period (dmaengine_prep_dma_cyclic()).
+    Depending on the direction, set the callback on the descriptor that finishes
+    the overal transfer:
+
+    * DMA_DEV_TO_MEM: set the callback on the "MDMA" descriptor
+    * DMA_MEM_TO_DEV: set the callback on the "DMA" descriptor
+
+    Then, submit the descriptors whatever the order, with dmaengine_tx_submit().
+
+  **5. Issue pending requests (and wait for callback notification)**
+
+  As STM32 MDMA channel transfer is triggered by STM32 DMA, you must issue
+  STM32 MDMA channel before STM32 DMA channel.
+
+  If any, your callback will be called to warn you about the end of the overal
+  transfer or the period completion.
+
+  Don't forget to terminate both channels. STM32 DMA channel is configured in
+  cyclic Double-Buffer mode so it won't be disabled by HW, you need to terminate
+  it. STM32 MDMA channel will be stopped by HW in case of sg transfer, but not
+  in case of cyclic transfer. You can terminate it whatever the kind of transfer.
+
+  **STM32 DMA-MDMA chaining DMA_MEM_TO_DEV special case**
+
+  STM32 DMA-MDMA chaining in DMA_MEM_TO_DEV is a special case. Indeed, the
+  STM32 MDMA feeds the SRAM buffer with the DDR data, and the STM32 DMA reads
+  data from SRAM buffer. So some data (the first period) have to be copied in
+  SRAM buffer when the STM32 DMA starts to read.
+
+  A trick could be pausing the STM32 DMA channel (that will raise a Transfer
+  Complete signal, triggering the STM32 MDMA channel), but the first data read
+  by the STM32 DMA could be "wrong". The proper way is to prepare the first SRAM
+  period with dmaengine_prep_dma_memcpy(). Then this first period should be
+  "removed" from the sg or the cyclic transfer.
+
+  Due to this complexity, rather use the STM32 DMA-MDMA chaining for
+  DMA_DEV_TO_MEM and keep the "classic" DMA usage for DMA_MEM_TO_DEV, unless
+  you're not afraid.
+
+Resources
+---------
+
+  Application note, datasheet and reference manual are available on ST website
+  (STM32MP1_).
+
+  Dedicated focus on three application notes (AN5224_, AN4031_ & AN5001_)
+  dealing with STM32 DMAMUX, STM32 DMA and STM32 MDMA.
+
+.. _STM32MP1: https://www.st.com/en/microcontrollers-microprocessors/stm32mp1-series.html
+.. _AN5224: https://www.st.com/resource/en/application_note/an5224-stm32-dmamux-the-dma-request-router-stmicroelectronics.pdf
+.. _AN4031: https://www.st.com/resource/en/application_note/dm00046011-using-the-stm32f2-stm32f4-and-stm32f7-series-dma-controller-stmicroelectronics.pdf
+.. _AN5001: https://www.st.com/resource/en/application_note/an5001-stm32cube-expansion-package-for-stm32h7-series-mdma-stmicroelectronics.pdf
+
+:Authors:
+
+- Amelie Delaunay <amelie.delaunay@foss.st.com>
+\ No newline at end of file
diff --git a/Documentation/arm/stm32/stm32mp13-overview.rst b/Documentation/arm/stm32/stm32mp13-overview.rst
new file mode 100644
index 000000000000..3bb9492dad49
--- /dev/null
+++ b/Documentation/arm/stm32/stm32mp13-overview.rst
@@ -0,0 +1,37 @@
+===================
+STM32MP13 Overview
+===================
+
+Introduction
+------------
+
+The STM32MP131/STM32MP133/STM32MP135 are Cortex-A MPU aimed at various applications.
+They feature:
+
+- One Cortex-A7 application core
+- Standard memories interface support
+- Standard connectivity, widely inherited from the STM32 MCU family
+- Comprehensive security support
+
+More details:
+
+- Cortex-A7 core running up to @900MHz
+- FMC controller to connect SDRAM, NOR and NAND memories
+- QSPI
+- SD/MMC/SDIO support
+- 2*Ethernet controller
+- CAN
+- ADC/DAC
+- USB EHCI/OHCI controllers
+- USB OTG
+- I2C, SPI, CAN busses support
+- Several general purpose timers
+- Serial Audio interface
+- LCD controller
+- DCMIPP
+- SPDIFRX
+- DFSDM
+
+:Authors:
+
+- Alexandre Torgue <alexandre.torgue@foss.st.com>
diff --git a/Documentation/arm/stm32/stm32mp151-overview.rst b/Documentation/arm/stm32/stm32mp151-overview.rst
new file mode 100644
index 000000000000..f42a2ac309c0
--- /dev/null
+++ b/Documentation/arm/stm32/stm32mp151-overview.rst
@@ -0,0 +1,36 @@
+===================
+STM32MP151 Overview
+===================
+
+Introduction
+------------
+
+The STM32MP151 is a Cortex-A MPU aimed at various applications.
+It features:
+
+- Single Cortex-A7 application core
+- Standard memories interface support
+- Standard connectivity, widely inherited from the STM32 MCU family
+- Comprehensive security support
+
+More details:
+
+- Cortex-A7 core running up to @800MHz
+- FMC controller to connect SDRAM, NOR and NAND memories
+- QSPI
+- SD/MMC/SDIO support
+- Ethernet controller
+- ADC/DAC
+- USB EHCI/OHCI controllers
+- USB OTG
+- I2C, SPI busses support
+- Several general purpose timers
+- Serial Audio interface
+- LCD-TFT controller
+- DCMIPP
+- SPDIFRX
+- DFSDM
+
+:Authors:
+
+- Roan van Dijk <roan@protonic.nl>
diff --git a/Documentation/arm/tcm.rst b/Documentation/arm/tcm.rst
index b256f9783883..1dc6c39220f9 100644
--- a/Documentation/arm/tcm.rst
+++ b/Documentation/arm/tcm.rst
@@ -34,7 +34,7 @@ CPU so it is usually wise not to overlap any physical RAM with
 the TCM.
 
 The TCM memory can then be remapped to another address again using
-the MMU, but notice that the TCM if often used in situations where
+the MMU, but notice that the TCM is often used in situations where
 the MMU is turned off. To avoid confusion the current Linux
 implementation will map the TCM 1 to 1 from physical to virtual
 memory in the location specified by the kernel. Currently Linux
diff --git a/Documentation/arm/uefi.rst b/Documentation/arm/uefi.rst
index 9b0b5e458a1e..baebe688a006 100644
--- a/Documentation/arm/uefi.rst
+++ b/Documentation/arm/uefi.rst
@@ -65,10 +65,6 @@ linux,uefi-mmap-desc-size   32-bit   Size in bytes of each entry in the UEFI
 
 linux,uefi-mmap-desc-ver    32-bit   Version of the mmap descriptor format.
 
-linux,initrd-start          64-bit   Physical start address of an initrd
-
-linux,initrd-end            64-bit   Physical end address of an initrd
-
 kaslr-seed                  64-bit   Entropy used to randomize the kernel image
                                      base address location.
 ==========================  ======   ===========================================
diff --git a/Documentation/arm64/acpi_object_usage.rst b/Documentation/arm64/acpi_object_usage.rst
index 0609da73970b..484ef9676653 100644
--- a/Documentation/arm64/acpi_object_usage.rst
+++ b/Documentation/arm64/acpi_object_usage.rst
@@ -163,7 +163,7 @@ FPDT   Section 5.2.23 (signature == "FPDT")
 
        **Firmware Performance Data Table**
 
-       Optional, not currently supported.
+       Optional, useful for boot performance profiling.
 
 GTDT   Section 5.2.24 (signature == "GTDT")
 
diff --git a/Documentation/arm64/booting.rst b/Documentation/arm64/booting.rst
index 3f9d86557c5e..ffeccdd6bdac 100644
--- a/Documentation/arm64/booting.rst
+++ b/Documentation/arm64/booting.rst
@@ -10,9 +10,9 @@ This document is based on the ARM booting document by Russell King and
 is relevant to all public releases of the AArch64 Linux kernel.
 
 The AArch64 exception model is made up of a number of exception levels
-(EL0 - EL3), with EL0 and EL1 having a secure and a non-secure
-counterpart.  EL2 is the hypervisor level and exists only in non-secure
-mode. EL3 is the highest priority level and exists only in secure mode.
+(EL0 - EL3), with EL0, EL1 and EL2 having a secure and a non-secure
+counterpart.  EL2 is the hypervisor level, EL3 is the highest priority
+level and exists only in secure mode. Both are architecturally optional.
 
 For the purposes of this document, we will use the term `boot loader`
 simply to define all software that executes on the CPU(s) before control
@@ -121,8 +121,9 @@ Header notes:
 			  to the base of DRAM, since memory below it is not
 			  accessible via the linear mapping
 			1
-			  2MB aligned base may be anywhere in physical
-			  memory
+			  2MB aligned base such that all image_size bytes
+			  counted from the start of the image are within
+			  the 48-bit addressable range of physical memory
   Bits 4-63	Reserved.
   ============= ===============================================================
 
@@ -167,8 +168,8 @@ Before jumping into the kernel, the following conditions must be met:
 
   All forms of interrupts must be masked in PSTATE.DAIF (Debug, SError,
   IRQ and FIQ).
-  The CPU must be in either EL2 (RECOMMENDED in order to have access to
-  the virtualisation extensions) or non-secure EL1.
+  The CPU must be in non-secure state, either in EL2 (RECOMMENDED in order
+  to have access to the virtualisation extensions), or in EL1.
 
 - Caches, MMUs
 
@@ -222,7 +223,7 @@ Before jumping into the kernel, the following conditions must be met:
   For systems with a GICv3 interrupt controller to be used in v3 mode:
   - If EL3 is present:
 
-      - ICC_SRE_EL3.Enable (bit 3) must be initialiased to 0b1.
+      - ICC_SRE_EL3.Enable (bit 3) must be initialised to 0b1.
       - ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1.
       - ICC_CTLR_EL3.PMHE (bit 6) must be set to the same value across
         all CPUs the kernel is executing on, and must stay constant
@@ -340,6 +341,44 @@ Before jumping into the kernel, the following conditions must be met:
     - SMCR_EL2.LEN must be initialised to the same value for all CPUs the
       kernel will execute on.
 
+    - HWFGRTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01.
+
+    - HWFGWTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01.
+
+    - HWFGRTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01.
+
+    - HWFGWTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01.
+
+  For CPUs with the Scalable Matrix Extension FA64 feature (FEAT_SME_FA64):
+
+  - If EL3 is present:
+
+    - SMCR_EL3.FA64 (bit 31) must be initialised to 0b1.
+
+ - If the kernel is entered at EL1 and EL2 is present:
+
+    - SMCR_EL2.FA64 (bit 31) must be initialised to 0b1.
+
+  For CPUs with the Memory Tagging Extension feature (FEAT_MTE2):
+
+  - If EL3 is present:
+
+    - SCR_EL3.ATA (bit 26) must be initialised to 0b1.
+
+  - If the kernel is entered at EL1 and EL2 is present:
+
+    - HCR_EL2.ATA (bit 56) must be initialised to 0b1.
+
+  For CPUs with the Scalable Matrix Extension version 2 (FEAT_SME2):
+
+  - If EL3 is present:
+
+    - SMCR_EL3.EZT0 (bit 30) must be initialised to 0b1.
+
+ - If the kernel is entered at EL1 and EL2 is present:
+
+    - SMCR_EL2.EZT0 (bit 30) must be initialised to 0b1.
+
 The requirements described above for CPU mode, caches, MMUs, architected
 timers, coherency and system registers apply to all CPUs.  All CPUs must
 enter the kernel in the same exception level.  Where the values documented
diff --git a/Documentation/arm64/cpu-feature-registers.rst b/Documentation/arm64/cpu-feature-registers.rst
index 328e0c454fbd..c7adc7897df6 100644
--- a/Documentation/arm64/cpu-feature-registers.rst
+++ b/Documentation/arm64/cpu-feature-registers.rst
@@ -92,7 +92,7 @@ operation if the source belongs to the supported system register space.
 
 The infrastructure emulates only the following system register space::
 
-	Op0=3, Op1=0, CRn=0, CRm=0,4,5,6,7
+	Op0=3, Op1=0, CRn=0, CRm=0,2,3,4,5,6,7
 
 (See Table C5-6 'System instruction encodings for non-Debug System
 register accesses' in ARMv8 ARM DDI 0487A.h, for the list of
@@ -235,7 +235,15 @@ infrastructure:
      | DPB                          | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
-  6) ID_AA64MMFR2_EL1 - Memory model feature register 2
+  6) ID_AA64MMFR0_EL1 - Memory model feature register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | ECV                          | [63-60] |    y    |
+     +------------------------------+---------+---------+
+
+  7) ID_AA64MMFR2_EL1 - Memory model feature register 2
 
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
@@ -243,7 +251,7 @@ infrastructure:
      | AT                           | [35-32] |    y    |
      +------------------------------+---------+---------+
 
-  7) ID_AA64ZFR0_EL1 - SVE feature ID register 0
+  8) ID_AA64ZFR0_EL1 - SVE feature ID register 0
 
      +------------------------------+---------+---------+
      | Name                         |  bits   | visible |
@@ -267,6 +275,61 @@ infrastructure:
      | SVEVer                       | [3-0]   |    y    |
      +------------------------------+---------+---------+
 
+  8) ID_AA64MMFR1_EL1 - Memory model feature register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | AFP                          | [47-44] |    y    |
+     +------------------------------+---------+---------+
+
+  9) ID_AA64ISAR2_EL1 - Instruction set attribute register 2
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | RPRES                        | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+     | WFXT                         | [3-0]   |    y    |
+     +------------------------------+---------+---------+
+
+  10) MVFR0_EL1 - AArch32 Media and VFP Feature Register 0
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | FPDP                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+
+  11) MVFR1_EL1 - AArch32 Media and VFP Feature Register 1
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | SIMDFMAC                     | [31-28] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDSP                       | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDInt                      | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | SIMDLS                       | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+
+  12) ID_ISAR5_EL1 - AArch32 Instruction Set Attribute Register 5
+
+     +------------------------------+---------+---------+
+     | Name                         |  bits   | visible |
+     +------------------------------+---------+---------+
+     | CRC32                        | [19-16] |    y    |
+     +------------------------------+---------+---------+
+     | SHA2                         | [15-12] |    y    |
+     +------------------------------+---------+---------+
+     | SHA1                         | [11-8]  |    y    |
+     +------------------------------+---------+---------+
+     | AES                          | [7-4]   |    y    |
+     +------------------------------+---------+---------+
+
+
 Appendix I: Example
 -------------------
 
diff --git a/Documentation/arm64/elf_hwcaps.rst b/Documentation/arm64/elf_hwcaps.rst
index ec1a5a63c1d0..83e57e4d38e2 100644
--- a/Documentation/arm64/elf_hwcaps.rst
+++ b/Documentation/arm64/elf_hwcaps.rst
@@ -14,7 +14,7 @@ Some hardware or software features are only available on some CPU
 implementations, and/or with certain kernel configurations, but have no
 architected discovery mechanism available to userspace code at EL0. The
 kernel exposes the presence of these features to userspace through a set
-of flags called hwcaps, exposed in the auxilliary vector.
+of flags called hwcaps, exposed in the auxiliary vector.
 
 Userspace software can test for features by acquiring the AT_HWCAP or
 AT_HWCAP2 entry of the auxiliary vector, and testing whether the relevant
@@ -171,82 +171,137 @@ HWCAP_PACG
     Documentation/arm64/pointer-authentication.rst.
 
 HWCAP2_DCPODP
-
     Functionality implied by ID_AA64ISAR1_EL1.DPB == 0b0010.
 
 HWCAP2_SVE2
-
     Functionality implied by ID_AA64ZFR0_EL1.SVEVer == 0b0001.
 
 HWCAP2_SVEAES
-
     Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0001.
 
 HWCAP2_SVEPMULL
-
     Functionality implied by ID_AA64ZFR0_EL1.AES == 0b0010.
 
 HWCAP2_SVEBITPERM
-
     Functionality implied by ID_AA64ZFR0_EL1.BitPerm == 0b0001.
 
 HWCAP2_SVESHA3
-
     Functionality implied by ID_AA64ZFR0_EL1.SHA3 == 0b0001.
 
 HWCAP2_SVESM4
-
     Functionality implied by ID_AA64ZFR0_EL1.SM4 == 0b0001.
 
 HWCAP2_FLAGM2
-
     Functionality implied by ID_AA64ISAR0_EL1.TS == 0b0010.
 
 HWCAP2_FRINT
-
     Functionality implied by ID_AA64ISAR1_EL1.FRINTTS == 0b0001.
 
 HWCAP2_SVEI8MM
-
     Functionality implied by ID_AA64ZFR0_EL1.I8MM == 0b0001.
 
 HWCAP2_SVEF32MM
-
     Functionality implied by ID_AA64ZFR0_EL1.F32MM == 0b0001.
 
 HWCAP2_SVEF64MM
-
     Functionality implied by ID_AA64ZFR0_EL1.F64MM == 0b0001.
 
 HWCAP2_SVEBF16
-
     Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0001.
 
 HWCAP2_I8MM
-
     Functionality implied by ID_AA64ISAR1_EL1.I8MM == 0b0001.
 
 HWCAP2_BF16
-
     Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0001.
 
 HWCAP2_DGH
-
     Functionality implied by ID_AA64ISAR1_EL1.DGH == 0b0001.
 
 HWCAP2_RNG
-
     Functionality implied by ID_AA64ISAR0_EL1.RNDR == 0b0001.
 
 HWCAP2_BTI
-
     Functionality implied by ID_AA64PFR0_EL1.BT == 0b0001.
 
 HWCAP2_MTE
-
     Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0010, as described
     by Documentation/arm64/memory-tagging-extension.rst.
 
+HWCAP2_ECV
+    Functionality implied by ID_AA64MMFR0_EL1.ECV == 0b0001.
+
+HWCAP2_AFP
+    Functionality implied by ID_AA64MFR1_EL1.AFP == 0b0001.
+
+HWCAP2_RPRES
+    Functionality implied by ID_AA64ISAR2_EL1.RPRES == 0b0001.
+
+HWCAP2_MTE3
+    Functionality implied by ID_AA64PFR1_EL1.MTE == 0b0011, as described
+    by Documentation/arm64/memory-tagging-extension.rst.
+
+HWCAP2_SME
+    Functionality implied by ID_AA64PFR1_EL1.SME == 0b0001, as described
+    by Documentation/arm64/sme.rst.
+
+HWCAP2_SME_I16I64
+    Functionality implied by ID_AA64SMFR0_EL1.I16I64 == 0b1111.
+
+HWCAP2_SME_F64F64
+    Functionality implied by ID_AA64SMFR0_EL1.F64F64 == 0b1.
+
+HWCAP2_SME_I8I32
+    Functionality implied by ID_AA64SMFR0_EL1.I8I32 == 0b1111.
+
+HWCAP2_SME_F16F32
+    Functionality implied by ID_AA64SMFR0_EL1.F16F32 == 0b1.
+
+HWCAP2_SME_B16F32
+    Functionality implied by ID_AA64SMFR0_EL1.B16F32 == 0b1.
+
+HWCAP2_SME_F32F32
+    Functionality implied by ID_AA64SMFR0_EL1.F32F32 == 0b1.
+
+HWCAP2_SME_FA64
+    Functionality implied by ID_AA64SMFR0_EL1.FA64 == 0b1.
+
+HWCAP2_WFXT
+    Functionality implied by ID_AA64ISAR2_EL1.WFXT == 0b0010.
+
+HWCAP2_EBF16
+    Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0010.
+
+HWCAP2_SVE_EBF16
+    Functionality implied by ID_AA64ZFR0_EL1.BF16 == 0b0010.
+
+HWCAP2_CSSC
+    Functionality implied by ID_AA64ISAR2_EL1.CSSC == 0b0001.
+
+HWCAP2_RPRFM
+    Functionality implied by ID_AA64ISAR2_EL1.RPRFM == 0b0001.
+
+HWCAP2_SVE2P1
+    Functionality implied by ID_AA64ZFR0_EL1.SVEver == 0b0010.
+
+HWCAP2_SME2
+    Functionality implied by ID_AA64SMFR0_EL1.SMEver == 0b0001.
+
+HWCAP2_SME2P1
+    Functionality implied by ID_AA64SMFR0_EL1.SMEver == 0b0010.
+
+HWCAP2_SMEI16I32
+    Functionality implied by ID_AA64SMFR0_EL1.I16I32 == 0b0101
+
+HWCAP2_SMEBI32I32
+    Functionality implied by ID_AA64SMFR0_EL1.BI32I32 == 0b1
+
+HWCAP2_SMEB16B16
+    Functionality implied by ID_AA64SMFR0_EL1.B16B16 == 0b1
+
+HWCAP2_SMEF16F16
+    Functionality implied by ID_AA64SMFR0_EL1.F16F16 == 0b1
+
 4. Unused AT_HWCAP bits
 -----------------------
 
diff --git a/Documentation/arm64/index.rst b/Documentation/arm64/index.rst
index 4f840bac083e..ae21f8118830 100644
--- a/Documentation/arm64/index.rst
+++ b/Documentation/arm64/index.rst
@@ -21,6 +21,7 @@ ARM64 Architecture
     perf
     pointer-authentication
     silicon-errata
+    sme
     sve
     tagged-address-abi
     tagged-pointers
diff --git a/Documentation/arm64/memory-tagging-extension.rst b/Documentation/arm64/memory-tagging-extension.rst
index 7b99c8f428eb..dbae47bba25e 100644
--- a/Documentation/arm64/memory-tagging-extension.rst
+++ b/Documentation/arm64/memory-tagging-extension.rst
@@ -76,6 +76,9 @@ configurable behaviours:
   with ``.si_code = SEGV_MTEAERR`` and ``.si_addr = 0`` (the faulting
   address is unknown).
 
+- *Asymmetric* - Reads are handled as for synchronous mode while writes
+  are handled as for asynchronous mode.
+
 The user can select the above modes, per thread, using the
 ``prctl(PR_SET_TAGGED_ADDR_CTRL, flags, 0, 0, 0)`` system call where ``flags``
 contains any number of the following values in the ``PR_MTE_TCF_MASK``
@@ -91,8 +94,9 @@ mode is specified, the program will run in that mode. If multiple
 modes are specified, the mode is selected as described in the "Per-CPU
 preferred tag checking modes" section below.
 
-The current tag check fault mode can be read using the
-``prctl(PR_GET_TAGGED_ADDR_CTRL, 0, 0, 0, 0)`` system call.
+The current tag check fault configuration can be read using the
+``prctl(PR_GET_TAGGED_ADDR_CTRL, 0, 0, 0, 0)`` system call. If
+multiple modes were requested then all will be reported.
 
 Tag checking can also be disabled for a user thread by setting the
 ``PSTATE.TCO`` bit with ``MSR TCO, #1``.
@@ -139,18 +143,25 @@ tag checking mode as the CPU's preferred tag checking mode.
 
 The preferred tag checking mode for each CPU is controlled by
 ``/sys/devices/system/cpu/cpu<N>/mte_tcf_preferred``, to which a
-privileged user may write the value ``async`` or ``sync``.  The default
-preferred mode for each CPU is ``async``.
+privileged user may write the value ``async``, ``sync`` or ``asymm``.  The
+default preferred mode for each CPU is ``async``.
 
 To allow a program to potentially run in the CPU's preferred tag
 checking mode, the user program may set multiple tag check fault mode
 bits in the ``flags`` argument to the ``prctl(PR_SET_TAGGED_ADDR_CTRL,
-flags, 0, 0, 0)`` system call. If the CPU's preferred tag checking
-mode is in the task's set of provided tag checking modes (this will
-always be the case at present because the kernel only supports two
-tag checking modes, but future kernels may support more modes), that
-mode will be selected. Otherwise, one of the modes in the task's mode
-set will be selected in a currently unspecified manner.
+flags, 0, 0, 0)`` system call. If both synchronous and asynchronous
+modes are requested then asymmetric mode may also be selected by the
+kernel. If the CPU's preferred tag checking mode is in the task's set
+of provided tag checking modes, that mode will be selected. Otherwise,
+one of the modes in the task's mode will be selected by the kernel
+from the task's mode set using the preference order:
+
+	1. Asynchronous
+	2. Asymmetric
+	3. Synchronous
+
+Note that there is no way for userspace to request multiple modes and
+also disable asymmetric mode.
 
 Initial process state
 ---------------------
@@ -213,6 +224,29 @@ address ABI control and MTE configuration of a process as per the
 Documentation/arm64/tagged-address-abi.rst and above. The corresponding
 ``regset`` is 1 element of 8 bytes (``sizeof(long))``).
 
+Core dump support
+-----------------
+
+The allocation tags for user memory mapped with ``PROT_MTE`` are dumped
+in the core file as additional ``PT_AARCH64_MEMTAG_MTE`` segments. The
+program header for such segment is defined as:
+
+:``p_type``: ``PT_AARCH64_MEMTAG_MTE``
+:``p_flags``: 0
+:``p_offset``: segment file offset
+:``p_vaddr``: segment virtual address, same as the corresponding
+  ``PT_LOAD`` segment
+:``p_paddr``: 0
+:``p_filesz``: segment size in file, calculated as ``p_mem_sz / 32``
+  (two 4-bit tags cover 32 bytes of memory)
+:``p_memsz``: segment size in memory, same as the corresponding
+  ``PT_LOAD`` segment
+:``p_align``: 0
+
+The tags are stored in the core file at ``p_offset`` as two 4-bit tags
+in a byte. With the tag granule of 16 bytes, a 4K page requires 128
+bytes in the core file.
+
 Example of correct usage
 ========================
 
diff --git a/Documentation/arm64/memory.rst b/Documentation/arm64/memory.rst
index 901cd094f4ec..2a641ba7be3b 100644
--- a/Documentation/arm64/memory.rst
+++ b/Documentation/arm64/memory.rst
@@ -33,9 +33,8 @@ AArch64 Linux memory layout with 4KB pages + 4 levels (48-bit)::
   0000000000000000	0000ffffffffffff	 256TB		user
   ffff000000000000	ffff7fffffffffff	 128TB		kernel logical memory map
  [ffff600000000000	ffff7fffffffffff]	  32TB		[kasan shadow region]
-  ffff800000000000	ffff800007ffffff	 128MB		bpf jit region
-  ffff800008000000	ffff80000fffffff	 128MB		modules
-  ffff800010000000	fffffbffefffffff	 124TB		vmalloc
+  ffff800000000000	ffff800007ffffff	 128MB		modules
+  ffff800008000000	fffffbffefffffff	 124TB		vmalloc
   fffffbfff0000000	fffffbfffdffffff	 224MB		fixed mappings (top down)
   fffffbfffe000000	fffffbfffe7fffff	   8MB		[guard region]
   fffffbfffe800000	fffffbffff7fffff	  16MB		PCI I/O space
@@ -51,9 +50,8 @@ AArch64 Linux memory layout with 64KB pages + 3 levels (52-bit with HW support):
   0000000000000000	000fffffffffffff	   4PB		user
   fff0000000000000	ffff7fffffffffff	  ~4PB		kernel logical memory map
  [fffd800000000000	ffff7fffffffffff]	 512TB		[kasan shadow region]
-  ffff800000000000	ffff800007ffffff	 128MB		bpf jit region
-  ffff800008000000	ffff80000fffffff	 128MB		modules
-  ffff800010000000	fffffbffefffffff	 124TB		vmalloc
+  ffff800000000000	ffff800007ffffff	 128MB		modules
+  ffff800008000000	fffffbffefffffff	 124TB		vmalloc
   fffffbfff0000000	fffffbfffdffffff	 224MB		fixed mappings (top down)
   fffffbfffe000000	fffffbfffe7fffff	   8MB		[guard region]
   fffffbfffe800000	fffffbffff7fffff	  16MB		PCI I/O space
diff --git a/Documentation/arm64/perf.rst b/Documentation/arm64/perf.rst
index b567f177d385..1f87b57c2332 100644
--- a/Documentation/arm64/perf.rst
+++ b/Documentation/arm64/perf.rst
@@ -2,7 +2,10 @@
 
 .. _perf_index:
 
-=====================
+====
+Perf
+====
+
 Perf Event Attributes
 =====================
 
@@ -88,3 +91,76 @@ exclude_host. However when using !exclude_hv there is a small blackout
 window at the guest entry/exit where host events are not captured.
 
 On VHE systems there are no blackout windows.
+
+Perf Userspace PMU Hardware Counter Access
+==========================================
+
+Overview
+--------
+The perf userspace tool relies on the PMU to monitor events. It offers an
+abstraction layer over the hardware counters since the underlying
+implementation is cpu-dependent.
+Arm64 allows userspace tools to have access to the registers storing the
+hardware counters' values directly.
+
+This targets specifically self-monitoring tasks in order to reduce the overhead
+by directly accessing the registers without having to go through the kernel.
+
+How-to
+------
+The focus is set on the armv8 PMUv3 which makes sure that the access to the pmu
+registers is enabled and that the userspace has access to the relevant
+information in order to use them.
+
+In order to have access to the hardware counters, the global sysctl
+kernel/perf_user_access must first be enabled:
+
+.. code-block:: sh
+
+  echo 1 > /proc/sys/kernel/perf_user_access
+
+It is necessary to open the event using the perf tool interface with config1:1
+attr bit set: the sys_perf_event_open syscall returns a fd which can
+subsequently be used with the mmap syscall in order to retrieve a page of memory
+containing information about the event. The PMU driver uses this page to expose
+to the user the hardware counter's index and other necessary data. Using this
+index enables the user to access the PMU registers using the `mrs` instruction.
+Access to the PMU registers is only valid while the sequence lock is unchanged.
+In particular, the PMSELR_EL0 register is zeroed each time the sequence lock is
+changed.
+
+The userspace access is supported in libperf using the perf_evsel__mmap()
+and perf_evsel__read() functions. See `tools/lib/perf/tests/test-evsel.c`_ for
+an example.
+
+About heterogeneous systems
+---------------------------
+On heterogeneous systems such as big.LITTLE, userspace PMU counter access can
+only be enabled when the tasks are pinned to a homogeneous subset of cores and
+the corresponding PMU instance is opened by specifying the 'type' attribute.
+The use of generic event types is not supported in this case.
+
+Have a look at `tools/perf/arch/arm64/tests/user-events.c`_ for an example. It
+can be run using the perf tool to check that the access to the registers works
+correctly from userspace:
+
+.. code-block:: sh
+
+  perf test -v user
+
+About chained events and counter sizes
+--------------------------------------
+The user can request either a 32-bit (config1:0 == 0) or 64-bit (config1:0 == 1)
+counter along with userspace access. The sys_perf_event_open syscall will fail
+if a 64-bit counter is requested and the hardware doesn't support 64-bit
+counters. Chained events are not supported in conjunction with userspace counter
+access. If a 32-bit counter is requested on hardware with 64-bit counters, then
+userspace must treat the upper 32-bits read from the counter as UNKNOWN. The
+'pmc_width' field in the user page will indicate the valid width of the counter
+and should be used to mask the upper bits as needed.
+
+.. Links
+.. _tools/perf/arch/arm64/tests/user-events.c:
+   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/perf/arch/arm64/tests/user-events.c
+.. _tools/lib/perf/tests/test-evsel.c:
+   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/lib/perf/tests/test-evsel.c
diff --git a/Documentation/arm64/pointer-authentication.rst b/Documentation/arm64/pointer-authentication.rst
index f127666ea3a8..e5dad2e40aa8 100644
--- a/Documentation/arm64/pointer-authentication.rst
+++ b/Documentation/arm64/pointer-authentication.rst
@@ -53,11 +53,10 @@ The number of bits that the PAC occupies in a pointer is 55 minus the
 virtual address size configured by the kernel. For example, with a
 virtual address size of 48, the PAC is 7 bits wide.
 
-Recent versions of GCC can compile code with APIAKey-based return
-address protection when passed the -msign-return-address option. This
-uses instructions in the HINT space (unless -march=armv8.3-a or higher
-is also passed), and such code can run on systems without the pointer
-authentication extension.
+When ARM64_PTR_AUTH_KERNEL is selected, the kernel will be compiled
+with HINT space pointer authentication instructions protecting
+function returns. Kernels built with this option will work on hardware
+with or without pointer authentication support.
 
 In addition to exec(), keys can also be reinitialized to random values
 using the PR_PAC_RESET_KEYS prctl. A bitmask of PR_PAC_APIAKEY,
diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index d410a47ffa57..9e311bc43e05 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -52,6 +52,14 @@ stable kernels.
 | Allwinner      | A64/R18         | UNKNOWN1        | SUN50I_ERRATUM_UNKNOWN1     |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2457168        | ARM64_ERRATUM_2457168       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2064142        | ARM64_ERRATUM_2064142       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2038923        | ARM64_ERRATUM_2038923       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #1902691        | ARM64_ERRATUM_1902691       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319        |
@@ -68,6 +76,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A55      | #1530923        | ARM64_ERRATUM_1530923       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A55      | #2441007        | ARM64_ERRATUM_2441007       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #852523         | N/A                         |
@@ -76,10 +86,14 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A57      | #1319537        | ARM64_ERRATUM_1319367       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A57      | #1742098        | ARM64_ERRATUM_1742098       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A72      | #853709         | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A72      | #1319367        | ARM64_ERRATUM_1319367       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A72      | #1655431        | ARM64_ERRATUM_1742098       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A76      | #1188873,1418040| ARM64_ERRATUM_1418040       |
@@ -92,12 +106,38 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A77      | #1508412        | ARM64_ERRATUM_1508412       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2051678        | ARM64_ERRATUM_2051678       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2077057        | ARM64_ERRATUM_2077057       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2441009        | ARM64_ERRATUM_2441009       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2658417        | ARM64_ERRATUM_2658417       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #2119858        | ARM64_ERRATUM_2119858       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #2054223        | ARM64_ERRATUM_2054223       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A710     | #2224489        | ARM64_ERRATUM_2224489       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A715     | #2645198        | ARM64_ERRATUM_2645198       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #2119858        | ARM64_ERRATUM_2119858       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-X2       | #2224489        | ARM64_ERRATUM_2224489       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1188873,1418040| ARM64_ERRATUM_1418040       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1349291        | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Neoverse-N1     | #1542419        | ARM64_ERRATUM_1542419       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #2139208        | ARM64_ERRATUM_2139208       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #2067961        | ARM64_ERRATUM_2067961       |
++----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Neoverse-N2     | #2253138        | ARM64_ERRATUM_2253138       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | MMU-500         | #841119,826419  | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
@@ -110,7 +150,7 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX ITS    | #23144          | CAVIUM_ERRATUM_23144        |
 +----------------+-----------------+-----------------+-----------------------------+
-| Cavium         | ThunderX GICv3  | #23154          | CAVIUM_ERRATUM_23154        |
+| Cavium         | ThunderX GICv3  | #23154,38545    | CAVIUM_ERRATUM_23154        |
 +----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX GICv3  | #38539          | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
@@ -132,6 +172,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | NVIDIA         | Carmel Core     | N/A             | NVIDIA_CARMEL_CNP_ERRATUM   |
 +----------------+-----------------+-----------------+-----------------------------+
+| NVIDIA         | T241 GICv3/4.x  | T241-FABRIC-4   | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Freescale/NXP  | LS2080A/LS1043A | A-008585        | FSL_ERRATUM_A008585         |
 +----------------+-----------------+-----------------+-----------------------------+
@@ -163,6 +205,12 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo4xx Silver  | N/A             | ARM64_ERRATUM_1024718       |
 +----------------+-----------------+-----------------+-----------------------------+
+| Qualcomm Tech. | Kryo4xx Gold    | N/A             | ARM64_ERRATUM_1286807       |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
+| Rockchip       | RK3588          | #3588001        | ROCKCHIP_ERRATUM_3588001    |
++----------------+-----------------+-----------------+-----------------------------+
+
 +----------------+-----------------+-----------------+-----------------------------+
 | Fujitsu        | A64FX           | E#010001        | FUJITSU_ERRATUM_010001      |
 +----------------+-----------------+-----------------+-----------------------------+
diff --git a/Documentation/arm64/sme.rst b/Documentation/arm64/sme.rst
new file mode 100644
index 000000000000..1c43ea12eb4f
--- /dev/null
+++ b/Documentation/arm64/sme.rst
@@ -0,0 +1,468 @@
+===================================================
+Scalable Matrix Extension support for AArch64 Linux
+===================================================
+
+This document outlines briefly the interface provided to userspace by Linux in
+order to support use of the ARM Scalable Matrix Extension (SME).
+
+This is an outline of the most important features and issues only and not
+intended to be exhaustive.  It should be read in conjunction with the SVE
+documentation in sve.rst which provides details on the Streaming SVE mode
+included in SME.
+
+This document does not aim to describe the SME architecture or programmer's
+model.  To aid understanding, a minimal description of relevant programmer's
+model features for SME is included in Appendix A.
+
+
+1.  General
+-----------
+
+* PSTATE.SM, PSTATE.ZA, the streaming mode vector length, the ZA and (when
+  present) ZTn register state and TPIDR2_EL0 are tracked per thread.
+
+* The presence of SME is reported to userspace via HWCAP2_SME in the aux vector
+  AT_HWCAP2 entry.  Presence of this flag implies the presence of the SME
+  instructions and registers, and the Linux-specific system interfaces
+  described in this document.  SME is reported in /proc/cpuinfo as "sme".
+
+* The presence of SME2 is reported to userspace via HWCAP2_SME2 in the
+  aux vector AT_HWCAP2 entry.  Presence of this flag implies the presence of
+  the SME2 instructions and ZT0, and the Linux-specific system interfaces
+  described in this document.  SME2 is reported in /proc/cpuinfo as "sme2".
+
+* Support for the execution of SME instructions in userspace can also be
+  detected by reading the CPU ID register ID_AA64PFR1_EL1 using an MRS
+  instruction, and checking that the value of the SME field is nonzero. [3]
+
+  It does not guarantee the presence of the system interfaces described in the
+  following sections: software that needs to verify that those interfaces are
+  present must check for HWCAP2_SME instead.
+
+* There are a number of optional SME features, presence of these is reported
+  through AT_HWCAP2 through:
+
+	HWCAP2_SME_I16I64
+	HWCAP2_SME_F64F64
+	HWCAP2_SME_I8I32
+	HWCAP2_SME_F16F32
+	HWCAP2_SME_B16F32
+	HWCAP2_SME_F32F32
+	HWCAP2_SME_FA64
+        HWCAP2_SME2
+
+  This list may be extended over time as the SME architecture evolves.
+
+  These extensions are also reported via the CPU ID register ID_AA64SMFR0_EL1,
+  which userspace can read using an MRS instruction.  See elf_hwcaps.txt and
+  cpu-feature-registers.txt for details.
+
+* Debuggers should restrict themselves to interacting with the target via the
+  NT_ARM_SVE, NT_ARM_SSVE, NT_ARM_ZA and NT_ARM_ZT regsets.  The recommended
+  way of detecting support for these regsets is to connect to a target process
+  first and then attempt a
+
+	ptrace(PTRACE_GETREGSET, pid, NT_ARM_<regset>, &iov).
+
+* Whenever ZA register values are exchanged in memory between userspace and
+  the kernel, the register value is encoded in memory as a series of horizontal
+  vectors from 0 to VL/8-1 stored in the same endianness invariant format as is
+  used for SVE vectors.
+
+* On thread creation TPIDR2_EL0 is preserved unless CLONE_SETTLS is specified,
+  in which case it is set to 0.
+
+2.  Vector lengths
+------------------
+
+SME defines a second vector length similar to the SVE vector length which is
+controls the size of the streaming mode SVE vectors and the ZA matrix array.
+The ZA matrix is square with each side having as many bytes as a streaming
+mode SVE vector.
+
+
+3.  Sharing of streaming and non-streaming mode SVE state
+---------------------------------------------------------
+
+It is implementation defined which if any parts of the SVE state are shared
+between streaming and non-streaming modes.  When switching between modes
+via software interfaces such as ptrace if no register content is provided as
+part of switching no state will be assumed to be shared and everything will
+be zeroed.
+
+
+4.  System call behaviour
+-------------------------
+
+* On syscall PSTATE.ZA is preserved, if PSTATE.ZA==1 then the contents of the
+  ZA matrix and ZTn (if present) are preserved.
+
+* On syscall PSTATE.SM will be cleared and the SVE registers will be handled
+  as per the standard SVE ABI.
+
+* None of the SVE registers, ZA or ZTn are used to pass arguments to
+  or receive results from any syscall.
+
+* On process creation (eg, clone()) the newly created process will have
+  PSTATE.SM cleared.
+
+* All other SME state of a thread, including the currently configured vector
+  length, the state of the PR_SME_VL_INHERIT flag, and the deferred vector
+  length (if any), is preserved across all syscalls, subject to the specific
+  exceptions for execve() described in section 6.
+
+
+5.  Signal handling
+-------------------
+
+* Signal handlers are invoked with streaming mode and ZA disabled.
+
+* A new signal frame record TPIDR2_MAGIC is added formatted as a struct
+  tpidr2_context to allow access to TPIDR2_EL0 from signal handlers.
+
+* A new signal frame record za_context encodes the ZA register contents on
+  signal delivery. [1]
+
+* The signal frame record for ZA always contains basic metadata, in particular
+  the thread's vector length (in za_context.vl).
+
+* The ZA matrix may or may not be included in the record, depending on
+  the value of PSTATE.ZA.  The registers are present if and only if:
+  za_context.head.size >= ZA_SIG_CONTEXT_SIZE(sve_vq_from_vl(za_context.vl))
+  in which case PSTATE.ZA == 1.
+
+* If matrix data is present, the remainder of the record has a vl-dependent
+  size and layout.  Macros ZA_SIG_* are defined [1] to facilitate access to
+  them.
+
+* The matrix is stored as a series of horizontal vectors in the same format as
+  is used for SVE vectors.
+
+* If the ZA context is too big to fit in sigcontext.__reserved[], then extra
+  space is allocated on the stack, an extra_context record is written in
+  __reserved[] referencing this space.  za_context is then written in the
+  extra space.  Refer to [1] for further details about this mechanism.
+
+* If ZTn is supported and PSTATE.ZA==1 then a signal frame record for ZTn will
+  be generated.
+
+* The signal record for ZTn has magic ZT_MAGIC (0x5a544e01) and consists of a
+  standard signal frame header followed by a struct zt_context specifying
+  the number of ZTn registers supported by the system, then zt_context.nregs
+  blocks of 64 bytes of data per register.
+
+
+5.  Signal return
+-----------------
+
+When returning from a signal handler:
+
+* If there is no za_context record in the signal frame, or if the record is
+  present but contains no register data as described in the previous section,
+  then ZA is disabled.
+
+* If za_context is present in the signal frame and contains matrix data then
+  PSTATE.ZA is set to 1 and ZA is populated with the specified data.
+
+* The vector length cannot be changed via signal return.  If za_context.vl in
+  the signal frame does not match the current vector length, the signal return
+  attempt is treated as illegal, resulting in a forced SIGSEGV.
+
+* If ZTn is not supported or PSTATE.ZA==0 then it is illegal to have a
+  signal frame record for ZTn, resulting in a forced SIGSEGV.
+
+
+6.  prctl extensions
+--------------------
+
+Some new prctl() calls are added to allow programs to manage the SME vector
+length:
+
+prctl(PR_SME_SET_VL, unsigned long arg)
+
+    Sets the vector length of the calling thread and related flags, where
+    arg == vl | flags.  Other threads of the calling process are unaffected.
+
+    vl is the desired vector length, where sve_vl_valid(vl) must be true.
+
+    flags:
+
+	PR_SME_VL_INHERIT
+
+	    Inherit the current vector length across execve().  Otherwise, the
+	    vector length is reset to the system default at execve().  (See
+	    Section 9.)
+
+	PR_SME_SET_VL_ONEXEC
+
+	    Defer the requested vector length change until the next execve()
+	    performed by this thread.
+
+	    The effect is equivalent to implicit execution of the following
+	    call immediately after the next execve() (if any) by the thread:
+
+		prctl(PR_SME_SET_VL, arg & ~PR_SME_SET_VL_ONEXEC)
+
+	    This allows launching of a new program with a different vector
+	    length, while avoiding runtime side effects in the caller.
+
+	    Without PR_SME_SET_VL_ONEXEC, the requested change takes effect
+	    immediately.
+
+
+    Return value: a nonnegative on success, or a negative value on error:
+	EINVAL: SME not supported, invalid vector length requested, or
+	    invalid flags.
+
+
+    On success:
+
+    * Either the calling thread's vector length or the deferred vector length
+      to be applied at the next execve() by the thread (dependent on whether
+      PR_SME_SET_VL_ONEXEC is present in arg), is set to the largest value
+      supported by the system that is less than or equal to vl.  If vl ==
+      SVE_VL_MAX, the value set will be the largest value supported by the
+      system.
+
+    * Any previously outstanding deferred vector length change in the calling
+      thread is cancelled.
+
+    * The returned value describes the resulting configuration, encoded as for
+      PR_SME_GET_VL.  The vector length reported in this value is the new
+      current vector length for this thread if PR_SME_SET_VL_ONEXEC was not
+      present in arg; otherwise, the reported vector length is the deferred
+      vector length that will be applied at the next execve() by the calling
+      thread.
+
+    * Changing the vector length causes all of ZA, ZTn, P0..P15, FFR and all
+      bits of Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
+      unspecified, including both streaming and non-streaming SVE state.
+      Calling PR_SME_SET_VL with vl equal to the thread's current vector
+      length, or calling PR_SME_SET_VL with the PR_SVE_SET_VL_ONEXEC flag,
+      does not constitute a change to the vector length for this purpose.
+
+    * Changing the vector length causes PSTATE.ZA and PSTATE.SM to be cleared.
+      Calling PR_SME_SET_VL with vl equal to the thread's current vector
+      length, or calling PR_SME_SET_VL with the PR_SVE_SET_VL_ONEXEC flag,
+      does not constitute a change to the vector length for this purpose.
+
+
+prctl(PR_SME_GET_VL)
+
+    Gets the vector length of the calling thread.
+
+    The following flag may be OR-ed into the result:
+
+	PR_SME_VL_INHERIT
+
+	    Vector length will be inherited across execve().
+
+    There is no way to determine whether there is an outstanding deferred
+    vector length change (which would only normally be the case between a
+    fork() or vfork() and the corresponding execve() in typical use).
+
+    To extract the vector length from the result, bitwise and it with
+    PR_SME_VL_LEN_MASK.
+
+    Return value: a nonnegative value on success, or a negative value on error:
+	EINVAL: SME not supported.
+
+
+7.  ptrace extensions
+---------------------
+
+* A new regset NT_ARM_SSVE is defined for access to streaming mode SVE
+  state via PTRACE_GETREGSET and  PTRACE_SETREGSET, this is documented in
+  sve.rst.
+
+* A new regset NT_ARM_ZA is defined for ZA state for access to ZA state via
+  PTRACE_GETREGSET and PTRACE_SETREGSET.
+
+  Refer to [2] for definitions.
+
+The regset data starts with struct user_za_header, containing:
+
+    size
+
+	Size of the complete regset, in bytes.
+	This depends on vl and possibly on other things in the future.
+
+	If a call to PTRACE_GETREGSET requests less data than the value of
+	size, the caller can allocate a larger buffer and retry in order to
+	read the complete regset.
+
+    max_size
+
+	Maximum size in bytes that the regset can grow to for the target
+	thread.  The regset won't grow bigger than this even if the target
+	thread changes its vector length etc.
+
+    vl
+
+	Target thread's current streaming vector length, in bytes.
+
+    max_vl
+
+	Maximum possible streaming vector length for the target thread.
+
+    flags
+
+	Zero or more of the following flags, which have the same
+	meaning and behaviour as the corresponding PR_SET_VL_* flags:
+
+	    SME_PT_VL_INHERIT
+
+	    SME_PT_VL_ONEXEC (SETREGSET only).
+
+* The effects of changing the vector length and/or flags are equivalent to
+  those documented for PR_SME_SET_VL.
+
+  The caller must make a further GETREGSET call if it needs to know what VL is
+  actually set by SETREGSET, unless is it known in advance that the requested
+  VL is supported.
+
+* The size and layout of the payload depends on the header fields.  The
+  SME_PT_ZA_*() macros are provided to facilitate access to the data.
+
+* In either case, for SETREGSET it is permissible to omit the payload, in which
+  case the vector length and flags are changed and PSTATE.ZA is set to 0
+  (along with any consequences of those changes).  If a payload is provided
+  then PSTATE.ZA will be set to 1.
+
+* For SETREGSET, if the requested VL is not supported, the effect will be the
+  same as if the payload were omitted, except that an EIO error is reported.
+  No attempt is made to translate the payload data to the correct layout
+  for the vector length actually set.  It is up to the caller to translate the
+  payload layout for the actual VL and retry.
+
+* The effect of writing a partial, incomplete payload is unspecified.
+
+* A new regset NT_ARM_ZT is defined for access to ZTn state via
+  PTRACE_GETREGSET and PTRACE_SETREGSET.
+
+* The NT_ARM_ZT regset consists of a single 512 bit register.
+
+* When PSTATE.ZA==0 reads of NT_ARM_ZT will report all bits of ZTn as 0.
+
+* Writes to NT_ARM_ZT will set PSTATE.ZA to 1.
+
+
+8.  ELF coredump extensions
+---------------------------
+
+* NT_ARM_SSVE notes will be added to each coredump for
+  each thread of the dumped process.  The contents will be equivalent to the
+  data that would have been read if a PTRACE_GETREGSET of the corresponding
+  type were executed for each thread when the coredump was generated.
+
+* A NT_ARM_ZA note will be added to each coredump for each thread of the
+  dumped process.  The contents will be equivalent to the data that would have
+  been read if a PTRACE_GETREGSET of NT_ARM_ZA were executed for each thread
+  when the coredump was generated.
+
+* A NT_ARM_ZT note will be added to each coredump for each thread of the
+  dumped process.  The contents will be equivalent to the data that would have
+  been read if a PTRACE_GETREGSET of NT_ARM_ZT were executed for each thread
+  when the coredump was generated.
+
+* The NT_ARM_TLS note will be extended to two registers, the second register
+  will contain TPIDR2_EL0 on systems that support SME and will be read as
+  zero with writes ignored otherwise.
+
+9.  System runtime configuration
+--------------------------------
+
+* To mitigate the ABI impact of expansion of the signal frame, a policy
+  mechanism is provided for administrators, distro maintainers and developers
+  to set the default vector length for userspace processes:
+
+/proc/sys/abi/sme_default_vector_length
+
+    Writing the text representation of an integer to this file sets the system
+    default vector length to the specified value, unless the value is greater
+    than the maximum vector length supported by the system in which case the
+    default vector length is set to that maximum.
+
+    The result can be determined by reopening the file and reading its
+    contents.
+
+    At boot, the default vector length is initially set to 32 or the maximum
+    supported vector length, whichever is smaller and supported.  This
+    determines the initial vector length of the init process (PID 1).
+
+    Reading this file returns the current system default vector length.
+
+* At every execve() call, the new vector length of the new process is set to
+  the system default vector length, unless
+
+    * PR_SME_VL_INHERIT (or equivalently SME_PT_VL_INHERIT) is set for the
+      calling thread, or
+
+    * a deferred vector length change is pending, established via the
+      PR_SME_SET_VL_ONEXEC flag (or SME_PT_VL_ONEXEC).
+
+* Modifying the system default vector length does not affect the vector length
+  of any existing process or thread that does not make an execve() call.
+
+
+Appendix A.  SME programmer's model (informative)
+=================================================
+
+This section provides a minimal description of the additions made by SME to the
+ARMv8-A programmer's model that are relevant to this document.
+
+Note: This section is for information only and not intended to be complete or
+to replace any architectural specification.
+
+A.1.  Registers
+---------------
+
+In A64 state, SME adds the following:
+
+* A new mode, streaming mode, in which a subset of the normal FPSIMD and SVE
+  features are available.  When supported EL0 software may enter and leave
+  streaming mode at any time.
+
+  For best system performance it is strongly encouraged for software to enable
+  streaming mode only when it is actively being used.
+
+* A new vector length controlling the size of ZA and the Z registers when in
+  streaming mode, separately to the vector length used for SVE when not in
+  streaming mode.  There is no requirement that either the currently selected
+  vector length or the set of vector lengths supported for the two modes in
+  a given system have any relationship.  The streaming mode vector length
+  is referred to as SVL.
+
+* A new ZA matrix register.  This is a square matrix of SVLxSVL bits.  Most
+  operations on ZA require that streaming mode be enabled but ZA can be
+  enabled without streaming mode in order to load, save and retain data.
+
+  For best system performance it is strongly encouraged for software to enable
+  ZA only when it is actively being used.
+
+* A new ZT0 register is introduced when SME2 is present. This is a 512 bit
+  register which is accessible when PSTATE.ZA is set, as ZA itself is.
+
+* Two new 1 bit fields in PSTATE which may be controlled via the SMSTART and
+  SMSTOP instructions or by access to the SVCR system register:
+
+  * PSTATE.ZA, if this is 1 then the ZA matrix is accessible and has valid
+    data while if it is 0 then ZA can not be accessed.  When PSTATE.ZA is
+    changed from 0 to 1 all bits in ZA are cleared.
+
+  * PSTATE.SM, if this is 1 then the PE is in streaming mode.  When the value
+    of PSTATE.SM is changed then it is implementation defined if the subset
+    of the floating point register bits valid in both modes may be retained.
+    Any other bits will be cleared.
+
+
+References
+==========
+
+[1] arch/arm64/include/uapi/asm/sigcontext.h
+    AArch64 Linux signal ABI definitions
+
+[2] arch/arm64/include/uapi/asm/ptrace.h
+    AArch64 Linux ptrace ABI definitions
+
+[3] Documentation/arm64/cpu-feature-registers.rst
diff --git a/Documentation/arm64/sve.rst b/Documentation/arm64/sve.rst
index 03137154299e..1b90a30382ac 100644
--- a/Documentation/arm64/sve.rst
+++ b/Documentation/arm64/sve.rst
@@ -7,7 +7,9 @@ Author: Dave Martin <Dave.Martin@arm.com>
 Date:   4 August 2017
 
 This document outlines briefly the interface provided to userspace by Linux in
-order to support use of the ARM Scalable Vector Extension (SVE).
+order to support use of the ARM Scalable Vector Extension (SVE), including
+interactions with Streaming SVE mode added by the Scalable Matrix Extension
+(SME).
 
 This is an outline of the most important features and issues only and not
 intended to be exhaustive.
@@ -23,6 +25,10 @@ model features for SVE is included in Appendix A.
 * SVE registers Z0..Z31, P0..P15 and FFR and the current vector length VL, are
   tracked per-thread.
 
+* In streaming mode FFR is not accessible unless HWCAP2_SME_FA64 is present
+  in the system, when it is not supported and these interfaces are used to
+  access streaming mode FFR is read and written as zero.
+
 * The presence of SVE is reported to userspace via HWCAP_SVE in the aux vector
   AT_HWCAP entry.  Presence of this flag implies the presence of the SVE
   instructions and registers, and the Linux-specific system interfaces
@@ -46,6 +52,7 @@ model features for SVE is included in Appendix A.
 	HWCAP2_SVEBITPERM
 	HWCAP2_SVESHA3
 	HWCAP2_SVESM4
+	HWCAP2_SVE2P1
 
   This list may be extended over time as the SVE architecture evolves.
 
@@ -53,10 +60,19 @@ model features for SVE is included in Appendix A.
   which userspace can read using an MRS instruction.  See elf_hwcaps.txt and
   cpu-feature-registers.txt for details.
 
+* On hardware that supports the SME extensions, HWCAP2_SME will also be
+  reported in the AT_HWCAP2 aux vector entry.  Among other things SME adds
+  streaming mode which provides a subset of the SVE feature set using a
+  separate SME vector length and the same Z/V registers.  See sme.rst
+  for more details.
+
 * Debuggers should restrict themselves to interacting with the target via the
   NT_ARM_SVE regset.  The recommended way of detecting support for this regset
   is to connect to a target process first and then attempt a
-  ptrace(PTRACE_GETREGSET, pid, NT_ARM_SVE, &iov).
+  ptrace(PTRACE_GETREGSET, pid, NT_ARM_SVE, &iov).  Note that when SME is
+  present and streaming SVE mode is in use the FPSIMD subset of registers
+  will be read via NT_ARM_SVE and NT_ARM_SVE writes will exit streaming mode
+  in the target.
 
 * Whenever SVE scalable register values (Zn, Pn, FFR) are exchanged in memory
   between userspace and the kernel, the register value is encoded in memory in
@@ -96,7 +112,7 @@ the SVE instruction set architecture.
 
 * On syscall, V0..V31 are preserved (as without SVE).  Thus, bits [127:0] of
   Z0..Z31 are preserved.  All other bits of Z0..Z31, and all of P0..P15 and FFR
-  become unspecified on return from a syscall.
+  become zero on return from a syscall.
 
 * The SVE registers are not used to pass arguments to or receive results from
   any syscall.
@@ -126,6 +142,11 @@ the SVE instruction set architecture.
   are only present in fpsimd_context.  For convenience, the content of V0..V31
   is duplicated between sve_context and fpsimd_context.
 
+* The record contains a flag field which includes a flag SVE_SIG_FLAG_SM which
+  if set indicates that the thread is in streaming mode and the vector length
+  and register data (if present) describe the streaming SVE data and vector
+  length.
+
 * The signal frame record for SVE always contains basic metadata, in particular
   the thread's vector length (in sve_context.vl).
 
@@ -154,7 +175,7 @@ the SVE instruction set architecture.
 When returning from a signal handler:
 
 * If there is no sve_context record in the signal frame, or if the record is
-  present but contains no register data as desribed in the previous section,
+  present but contains no register data as described in the previous section,
   then the SVE registers/bits become non-live and take unspecified values.
 
 * If sve_context is present in the signal frame and contains full register
@@ -170,6 +191,11 @@ When returning from a signal handler:
   the signal frame does not match the current vector length, the signal return
   attempt is treated as illegal, resulting in a forced SIGSEGV.
 
+* It is permitted to enter or leave streaming mode by setting or clearing
+  the SVE_SIG_FLAG_SM flag but applications should take care to ensure that
+  when doing so sve_context.vl and any register data are appropriate for the
+  vector length in the new mode.
+
 
 6.  prctl extensions
 --------------------
@@ -197,7 +223,7 @@ prctl(PR_SVE_SET_VL, unsigned long arg)
 	    Defer the requested vector length change until the next execve()
 	    performed by this thread.
 
-	    The effect is equivalent to implicit exceution of the following
+	    The effect is equivalent to implicit execution of the following
 	    call immediately after the next execve() (if any) by the thread:
 
 		prctl(PR_SVE_SET_VL, arg & ~PR_SVE_SET_VL_ONEXEC)
@@ -255,7 +281,7 @@ prctl(PR_SVE_GET_VL)
     vector length change (which would only normally be the case between a
     fork() or vfork() and the corresponding execve() in typical use).
 
-    To extract the vector length from the result, and it with
+    To extract the vector length from the result, bitwise and it with
     PR_SVE_VL_LEN_MASK.
 
     Return value: a nonnegative value on success, or a negative value on error:
@@ -265,8 +291,14 @@ prctl(PR_SVE_GET_VL)
 7.  ptrace extensions
 ---------------------
 
-* A new regset NT_ARM_SVE is defined for use with PTRACE_GETREGSET and
-  PTRACE_SETREGSET.
+* New regsets NT_ARM_SVE and NT_ARM_SSVE are defined for use with
+  PTRACE_GETREGSET and PTRACE_SETREGSET. NT_ARM_SSVE describes the
+  streaming mode SVE registers and NT_ARM_SVE describes the
+  non-streaming mode SVE registers.
+
+  In this description a register set is referred to as being "live" when
+  the target is in the appropriate streaming or non-streaming mode and is
+  using data beyond the subset shared with the FPSIMD Vn registers.
 
   Refer to [2] for definitions.
 
@@ -297,7 +329,7 @@ The regset data starts with struct user_sve_header, containing:
 
     flags
 
-	either
+	at most one of
 
 	    SVE_PT_REGS_FPSIMD
 
@@ -331,6 +363,10 @@ The regset data starts with struct user_sve_header, containing:
 
 	    SVE_PT_VL_ONEXEC (SETREGSET only).
 
+	If neither FPSIMD nor SVE flags are provided then no register
+	payload is available, this is only possible when SME is implemented.
+
+
 * The effects of changing the vector length and/or flags are equivalent to
   those documented for PR_SVE_SET_VL.
 
@@ -346,6 +382,13 @@ The regset data starts with struct user_sve_header, containing:
   case only the vector length and flags are changed (along with any
   consequences of those changes).
 
+* In systems supporting SME when in streaming mode a GETREGSET for
+  NT_REG_SVE will return only the user_sve_header with no register data,
+  similarly a GETREGSET for NT_REG_SSVE will not return any register data
+  when not in streaming mode.
+
+* A GETREGSET for NT_ARM_SSVE will never return SVE_PT_REGS_FPSIMD.
+
 * For SETREGSET, if an SVE_PT_REGS_SVE payload is present and the
   requested VL is not supported, the effect will be the same as if the
   payload were omitted, except that an EIO error is reported.  No
@@ -355,17 +398,25 @@ The regset data starts with struct user_sve_header, containing:
   unspecified.  It is up to the caller to translate the payload layout
   for the actual VL and retry.
 
+* Where SME is implemented it is not possible to GETREGSET the register
+  state for normal SVE when in streaming mode, nor the streaming mode
+  register state when in normal mode, regardless of the implementation defined
+  behaviour of the hardware for sharing data between the two modes.
+
+* Any SETREGSET of NT_ARM_SVE will exit streaming mode if the target was in
+  streaming mode and any SETREGSET of NT_ARM_SSVE will enter streaming mode
+  if the target was not in streaming mode.
+
 * The effect of writing a partial, incomplete payload is unspecified.
 
 
 8.  ELF coredump extensions
 ---------------------------
 
-* A NT_ARM_SVE note will be added to each coredump for each thread of the
-  dumped process.  The contents will be equivalent to the data that would have
-  been read if a PTRACE_GETREGSET of NT_ARM_SVE were executed for each thread
-  when the coredump was generated.
-
+* NT_ARM_SVE and NT_ARM_SSVE notes will be added to each coredump for
+  each thread of the dumped process.  The contents will be equivalent to the
+  data that would have been read if a PTRACE_GETREGSET of the corresponding
+  type were executed for each thread when the coredump was generated.
 
 9.  System runtime configuration
 --------------------------------
@@ -402,6 +453,24 @@ The regset data starts with struct user_sve_header, containing:
 * Modifying the system default vector length does not affect the vector length
   of any existing process or thread that does not make an execve() call.
 
+10.  Perf extensions
+--------------------------------
+
+* The arm64 specific DWARF standard [5] added the VG (Vector Granule) register
+  at index 46. This register is used for DWARF unwinding when variable length
+  SVE registers are pushed onto the stack.
+
+* Its value is equivalent to the current SVE vector length (VL) in bits divided
+  by 64.
+
+* The value is included in Perf samples in the regs[46] field if
+  PERF_SAMPLE_REGS_USER is set and the sample_regs_user mask has bit 46 set.
+
+* The value is the current value at the time the sample was taken, and it can
+  change over time.
+
+* If the system doesn't support SVE when perf_event_open is called with these
+  settings, the event will fail to open.
 
 Appendix A.  SVE programmer's model (informative)
 =================================================
@@ -543,3 +612,5 @@ References
     http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf
     http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
     Procedure Call Standard for the ARM 64-bit Architecture (AArch64)
+
+[5] https://github.com/ARM-software/abi-aa/blob/main/aadwarf64/aadwarf64.rst
diff --git a/Documentation/arm64/tagged-address-abi.rst b/Documentation/arm64/tagged-address-abi.rst
index 0c9120ec58ae..540a1d4fc6c9 100644
--- a/Documentation/arm64/tagged-address-abi.rst
+++ b/Documentation/arm64/tagged-address-abi.rst
@@ -49,7 +49,7 @@ how the user addresses are used by the kernel:
 
    - ``brk()``, ``mmap()`` and the ``new_address`` argument to
      ``mremap()`` as these have the potential to alias with existing
-      user addresses.
+     user addresses.
 
      NOTE: This behaviour changed in v5.6 and so some earlier kernels may
      incorrectly accept valid tagged pointers for the ``brk()``,
diff --git a/Documentation/atomic_bitops.txt b/Documentation/atomic_bitops.txt
index 093cdaefdb37..edea4656c5c0 100644
--- a/Documentation/atomic_bitops.txt
+++ b/Documentation/atomic_bitops.txt
@@ -58,13 +58,11 @@ Like with atomic_t, the rule of thumb is:
 
  - RMW operations that have a return value are fully ordered.
 
- - RMW operations that are conditional are unordered on FAILURE,
-   otherwise the above rules apply. In the case of test_and_{}_bit() operations,
-   if the bit in memory is unchanged by the operation then it is deemed to have
-   failed.
+ - RMW operations that are conditional are fully ordered.
 
-Except for a successful test_and_set_bit_lock() which has ACQUIRE semantics and
-clear_bit_unlock() which has RELEASE semantics.
+Except for a successful test_and_set_bit_lock() which has ACQUIRE semantics,
+clear_bit_unlock() which has RELEASE semantics and test_bit_acquire which has
+ACQUIRE semantics.
 
 Since a platform only has a single means of achieving atomic operations
 the same barriers as for atomic_t are used, see atomic_t.txt.
diff --git a/Documentation/atomic_t.txt b/Documentation/atomic_t.txt
index 0f1ffa03db09..d7adc6d543db 100644
--- a/Documentation/atomic_t.txt
+++ b/Documentation/atomic_t.txt
@@ -324,7 +324,7 @@ atomic operations.
 
 Specifically 'simple' cmpxchg() loops are expected to not starve one another
 indefinitely. However, this is not evident on LL/SC architectures, because
-while an LL/SC architecure 'can/should/must' provide forward progress
+while an LL/SC architecture 'can/should/must' provide forward progress
 guarantees between competing LL/SC sections, such a guarantee does not
 transfer to cmpxchg() implemented using LL/SC. Consider:
 
diff --git a/Documentation/block/biodoc.rst b/Documentation/block/biodoc.rst
deleted file mode 100644
index 2098477851a4..000000000000
--- a/Documentation/block/biodoc.rst
+++ /dev/null
@@ -1,1164 +0,0 @@
-=====================================================
-Notes on the Generic Block Layer Rewrite in Linux 2.5
-=====================================================
-
-.. note::
-
-	It seems that there are lot of outdated stuff here. This seems
-	to be written somewhat as a task list. Yet, eventually, something
-	here might still be useful.
-
-Notes Written on Jan 15, 2002:
-
-	- Jens Axboe <jens.axboe@oracle.com>
-	- Suparna Bhattacharya <suparna@in.ibm.com>
-
-Last Updated May 2, 2002
-
-September 2003: Updated I/O Scheduler portions
-	- Nick Piggin <npiggin@kernel.dk>
-
-Introduction
-============
-
-These are some notes describing some aspects of the 2.5 block layer in the
-context of the bio rewrite. The idea is to bring out some of the key
-changes and a glimpse of the rationale behind those changes.
-
-Please mail corrections & suggestions to suparna@in.ibm.com.
-
-Credits
-=======
-
-2.5 bio rewrite:
-	- Jens Axboe <jens.axboe@oracle.com>
-
-Many aspects of the generic block layer redesign were driven by and evolved
-over discussions, prior patches and the collective experience of several
-people. See sections 8 and 9 for a list of some related references.
-
-The following people helped with review comments and inputs for this
-document:
-
-	- Christoph Hellwig <hch@infradead.org>
-	- Arjan van de Ven <arjanv@redhat.com>
-	- Randy Dunlap <rdunlap@xenotime.net>
-	- Andre Hedrick <andre@linux-ide.org>
-
-The following people helped with fixes/contributions to the bio patches
-while it was still work-in-progress:
-
-	- David S. Miller <davem@redhat.com>
-
-
-.. Description of Contents:
-
-   1. Scope for tuning of logic to various needs
-     1.1 Tuning based on device or low level driver capabilities
-	- Per-queue parameters
-	- Highmem I/O support
-	- I/O scheduler modularization
-     1.2 Tuning based on high level requirements/capabilities
-	1.2.1 Request Priority/Latency
-     1.3 Direct access/bypass to lower layers for diagnostics and special
-	 device operations
-	1.3.1 Pre-built commands
-   2. New flexible and generic but minimalist i/o structure or descriptor
-      (instead of using buffer heads at the i/o layer)
-     2.1 Requirements/Goals addressed
-     2.2 The bio struct in detail (multi-page io unit)
-     2.3 Changes in the request structure
-   3. Using bios
-     3.1 Setup/teardown (allocation, splitting)
-     3.2 Generic bio helper routines
-       3.2.1 Traversing segments and completion units in a request
-       3.2.2 Setting up DMA scatterlists
-       3.2.3 I/O completion
-       3.2.4 Implications for drivers that do not interpret bios (don't handle
-	  multiple segments)
-     3.3 I/O submission
-   4. The I/O scheduler
-   5. Scalability related changes
-     5.1 Granular locking: Removal of io_request_lock
-     5.2 Prepare for transition to 64 bit sector_t
-   6. Other Changes/Implications
-     6.1 Partition re-mapping handled by the generic block layer
-   7. A few tips on migration of older drivers
-   8. A list of prior/related/impacted patches/ideas
-   9. Other References/Discussion Threads
-
-
-Bio Notes
-=========
-
-Let us discuss the changes in the context of how some overall goals for the
-block layer are addressed.
-
-1. Scope for tuning the generic logic to satisfy various requirements
-=====================================================================
-
-The block layer design supports adaptable abstractions to handle common
-processing with the ability to tune the logic to an appropriate extent
-depending on the nature of the device and the requirements of the caller.
-One of the objectives of the rewrite was to increase the degree of tunability
-and to enable higher level code to utilize underlying device/driver
-capabilities to the maximum extent for better i/o performance. This is
-important especially in the light of ever improving hardware capabilities
-and application/middleware software designed to take advantage of these
-capabilities.
-
-1.1 Tuning based on low level device / driver capabilities
-----------------------------------------------------------
-
-Sophisticated devices with large built-in caches, intelligent i/o scheduling
-optimizations, high memory DMA support, etc may find some of the
-generic processing an overhead, while for less capable devices the
-generic functionality is essential for performance or correctness reasons.
-Knowledge of some of the capabilities or parameters of the device should be
-used at the generic block layer to take the right decisions on
-behalf of the driver.
-
-How is this achieved ?
-
-Tuning at a per-queue level:
-
-i. Per-queue limits/values exported to the generic layer by the driver
-
-Various parameters that the generic i/o scheduler logic uses are set at
-a per-queue level (e.g maximum request size, maximum number of segments in
-a scatter-gather list, logical block size)
-
-Some parameters that were earlier available as global arrays indexed by
-major/minor are now directly associated with the queue. Some of these may
-move into the block device structure in the future. Some characteristics
-have been incorporated into a queue flags field rather than separate fields
-in themselves.  There are blk_queue_xxx functions to set the parameters,
-rather than update the fields directly
-
-Some new queue property settings:
-
-	blk_queue_bounce_limit(q, u64 dma_address)
-		Enable I/O to highmem pages, dma_address being the
-		limit. No highmem default.
-
-	blk_queue_max_sectors(q, max_sectors)
-		Sets two variables that limit the size of the request.
-
-		- The request queue's max_sectors, which is a soft size in
-		  units of 512 byte sectors, and could be dynamically varied
-		  by the core kernel.
-
-		- The request queue's max_hw_sectors, which is a hard limit
-		  and reflects the maximum size request a driver can handle
-		  in units of 512 byte sectors.
-
-		The default for both max_sectors and max_hw_sectors is
-		255. The upper limit of max_sectors is 1024.
-
-	blk_queue_max_phys_segments(q, max_segments)
-		Maximum physical segments you can handle in a request. 128
-		default (driver limit). (See 3.2.2)
-
-	blk_queue_max_hw_segments(q, max_segments)
-		Maximum dma segments the hardware can handle in a request. 128
-		default (host adapter limit, after dma remapping).
-		(See 3.2.2)
-
-	blk_queue_max_segment_size(q, max_seg_size)
-		Maximum size of a clustered segment, 64kB default.
-
-	blk_queue_logical_block_size(q, logical_block_size)
-		Lowest possible sector size that the hardware can operate
-		on, 512 bytes default.
-
-New queue flags:
-
-	- QUEUE_FLAG_CLUSTER (see 3.2.2)
-	- QUEUE_FLAG_QUEUED (see 3.2.4)
-
-
-ii. High-mem i/o capabilities are now considered the default
-
-The generic bounce buffer logic, present in 2.4, where the block layer would
-by default copyin/out i/o requests on high-memory buffers to low-memory buffers
-assuming that the driver wouldn't be able to handle it directly, has been
-changed in 2.5. The bounce logic is now applied only for memory ranges
-for which the device cannot handle i/o. A driver can specify this by
-setting the queue bounce limit for the request queue for the device
-(blk_queue_bounce_limit()). This avoids the inefficiencies of the copyin/out
-where a device is capable of handling high memory i/o.
-
-In order to enable high-memory i/o where the device is capable of supporting
-it, the pci dma mapping routines and associated data structures have now been
-modified to accomplish a direct page -> bus translation, without requiring
-a virtual address mapping (unlike the earlier scheme of virtual address
--> bus translation). So this works uniformly for high-memory pages (which
-do not have a corresponding kernel virtual address space mapping) and
-low-memory pages.
-
-Note: Please refer to Documentation/core-api/dma-api-howto.rst for a discussion
-on PCI high mem DMA aspects and mapping of scatter gather lists, and support
-for 64 bit PCI.
-
-Special handling is required only for cases where i/o needs to happen on
-pages at physical memory addresses beyond what the device can support. In these
-cases, a bounce bio representing a buffer from the supported memory range
-is used for performing the i/o with copyin/copyout as needed depending on
-the type of the operation.  For example, in case of a read operation, the
-data read has to be copied to the original buffer on i/o completion, so a
-callback routine is set up to do this, while for write, the data is copied
-from the original buffer to the bounce buffer prior to issuing the
-operation. Since an original buffer may be in a high memory area that's not
-mapped in kernel virtual addr, a kmap operation may be required for
-performing the copy, and special care may be needed in the completion path
-as it may not be in irq context. Special care is also required (by way of
-GFP flags) when allocating bounce buffers, to avoid certain highmem
-deadlock possibilities.
-
-It is also possible that a bounce buffer may be allocated from high-memory
-area that's not mapped in kernel virtual addr, but within the range that the
-device can use directly; so the bounce page may need to be kmapped during
-copy operations. [Note: This does not hold in the current implementation,
-though]
-
-There are some situations when pages from high memory may need to
-be kmapped, even if bounce buffers are not necessary. For example a device
-may need to abort DMA operations and revert to PIO for the transfer, in
-which case a virtual mapping of the page is required. For SCSI it is also
-done in some scenarios where the low level driver cannot be trusted to
-handle a single sg entry correctly. The driver is expected to perform the
-kmaps as needed on such occasions as appropriate. A driver could also use
-the blk_queue_bounce() routine on its own to bounce highmem i/o to low
-memory for specific requests if so desired.
-
-iii. The i/o scheduler algorithm itself can be replaced/set as appropriate
-
-As in 2.4, it is possible to plugin a brand new i/o scheduler for a particular
-queue or pick from (copy) existing generic schedulers and replace/override
-certain portions of it. The 2.5 rewrite provides improved modularization
-of the i/o scheduler. There are more pluggable callbacks, e.g for init,
-add request, extract request, which makes it possible to abstract specific
-i/o scheduling algorithm aspects and details outside of the generic loop.
-It also makes it possible to completely hide the implementation details of
-the i/o scheduler from block drivers.
-
-I/O scheduler wrappers are to be used instead of accessing the queue directly.
-See section 4. The I/O scheduler for details.
-
-1.2 Tuning Based on High level code capabilities
-------------------------------------------------
-
-i. Application capabilities for raw i/o
-
-This comes from some of the high-performance database/middleware
-requirements where an application prefers to make its own i/o scheduling
-decisions based on an understanding of the access patterns and i/o
-characteristics
-
-ii. High performance filesystems or other higher level kernel code's
-capabilities
-
-Kernel components like filesystems could also take their own i/o scheduling
-decisions for optimizing performance. Journalling filesystems may need
-some control over i/o ordering.
-
-What kind of support exists at the generic block layer for this ?
-
-The flags and rw fields in the bio structure can be used for some tuning
-from above e.g indicating that an i/o is just a readahead request, or priority
-settings (currently unused). As far as user applications are concerned they
-would need an additional mechanism either via open flags or ioctls, or some
-other upper level mechanism to communicate such settings to block.
-
-1.2.1 Request Priority/Latency
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Todo/Under discussion::
-
-  Arjan's proposed request priority scheme allows higher levels some broad
-  control (high/med/low) over the priority  of an i/o request vs other pending
-  requests in the queue. For example it allows reads for bringing in an
-  executable page on demand to be given a higher priority over pending write
-  requests which haven't aged too much on the queue. Potentially this priority
-  could even be exposed to applications in some manner, providing higher level
-  tunability. Time based aging avoids starvation of lower priority
-  requests. Some bits in the bi_opf flags field in the bio structure are
-  intended to be used for this priority information.
-
-
-1.3 Direct Access to Low level Device/Driver Capabilities (Bypass mode)
------------------------------------------------------------------------
-
-(e.g Diagnostics, Systems Management)
-
-There are situations where high-level code needs to have direct access to
-the low level device capabilities or requires the ability to issue commands
-to the device bypassing some of the intermediate i/o layers.
-These could, for example, be special control commands issued through ioctl
-interfaces, or could be raw read/write commands that stress the drive's
-capabilities for certain kinds of fitness tests. Having direct interfaces at
-multiple levels without having to pass through upper layers makes
-it possible to perform bottom up validation of the i/o path, layer by
-layer, starting from the media.
-
-The normal i/o submission interfaces, e.g submit_bio, could be bypassed
-for specially crafted requests which such ioctl or diagnostics
-interfaces would typically use, and the elevator add_request routine
-can instead be used to directly insert such requests in the queue or preferably
-the blk_do_rq routine can be used to place the request on the queue and
-wait for completion. Alternatively, sometimes the caller might just
-invoke a lower level driver specific interface with the request as a
-parameter.
-
-If the request is a means for passing on special information associated with
-the command, then such information is associated with the request->special
-field (rather than misuse the request->buffer field which is meant for the
-request data buffer's virtual mapping).
-
-For passing request data, the caller must build up a bio descriptor
-representing the concerned memory buffer if the underlying driver interprets
-bio segments or uses the block layer end*request* functions for i/o
-completion. Alternatively one could directly use the request->buffer field to
-specify the virtual address of the buffer, if the driver expects buffer
-addresses passed in this way and ignores bio entries for the request type
-involved. In the latter case, the driver would modify and manage the
-request->buffer, request->sector and request->nr_sectors or
-request->current_nr_sectors fields itself rather than using the block layer
-end_request or end_that_request_first completion interfaces.
-(See 2.3 or Documentation/block/request.rst for a brief explanation of
-the request structure fields)
-
-::
-
-  [TBD: end_that_request_last should be usable even in this case;
-  Perhaps an end_that_direct_request_first routine could be implemented to make
-  handling direct requests easier for such drivers; Also for drivers that
-  expect bios, a helper function could be provided for setting up a bio
-  corresponding to a data buffer]
-
-  <JENS: I dont understand the above, why is end_that_request_first() not
-  usable? Or _last for that matter. I must be missing something>
-
-  <SUP: What I meant here was that if the request doesn't have a bio, then
-   end_that_request_first doesn't modify nr_sectors or current_nr_sectors,
-   and hence can't be used for advancing request state settings on the
-   completion of partial transfers. The driver has to modify these fields
-   directly by hand.
-   This is because end_that_request_first only iterates over the bio list,
-   and always returns 0 if there are none associated with the request.
-   _last works OK in this case, and is not a problem, as I mentioned earlier
-  >
-
-1.3.1 Pre-built Commands
-^^^^^^^^^^^^^^^^^^^^^^^^
-
-A request can be created with a pre-built custom command  to be sent directly
-to the device. The cmd block in the request structure has room for filling
-in the command bytes. (i.e rq->cmd is now 16 bytes in size, and meant for
-command pre-building, and the type of the request is now indicated
-through rq->flags instead of via rq->cmd)
-
-The request structure flags can be set up to indicate the type of request
-in such cases (REQ_PC: direct packet command passed to driver, REQ_BLOCK_PC:
-packet command issued via blk_do_rq, REQ_SPECIAL: special request).
-
-It can help to pre-build device commands for requests in advance.
-Drivers can now specify a request prepare function (q->prep_rq_fn) that the
-block layer would invoke to pre-build device commands for a given request,
-or perform other preparatory processing for the request. This is routine is
-called by elv_next_request(), i.e. typically just before servicing a request.
-(The prepare function would not be called for requests that have RQF_DONTPREP
-enabled)
-
-Aside:
-  Pre-building could possibly even be done early, i.e before placing the
-  request on the queue, rather than construct the command on the fly in the
-  driver while servicing the request queue when it may affect latencies in
-  interrupt context or responsiveness in general. One way to add early
-  pre-building would be to do it whenever we fail to merge on a request.
-  Now REQ_NOMERGE is set in the request flags to skip this one in the future,
-  which means that it will not change before we feed it to the device. So
-  the pre-builder hook can be invoked there.
-
-
-2. Flexible and generic but minimalist i/o structure/descriptor
-===============================================================
-
-2.1 Reason for a new structure and requirements addressed
----------------------------------------------------------
-
-Prior to 2.5, buffer heads were used as the unit of i/o at the generic block
-layer, and the low level request structure was associated with a chain of
-buffer heads for a contiguous i/o request. This led to certain inefficiencies
-when it came to large i/o requests and readv/writev style operations, as it
-forced such requests to be broken up into small chunks before being passed
-on to the generic block layer, only to be merged by the i/o scheduler
-when the underlying device was capable of handling the i/o in one shot.
-Also, using the buffer head as an i/o structure for i/os that didn't originate
-from the buffer cache unnecessarily added to the weight of the descriptors
-which were generated for each such chunk.
-
-The following were some of the goals and expectations considered in the
-redesign of the block i/o data structure in 2.5.
-
-1.  Should be appropriate as a descriptor for both raw and buffered i/o  -
-    avoid cache related fields which are irrelevant in the direct/page i/o path,
-    or filesystem block size alignment restrictions which may not be relevant
-    for raw i/o.
-2.  Ability to represent high-memory buffers (which do not have a virtual
-    address mapping in kernel address space).
-3.  Ability to represent large i/os w/o unnecessarily breaking them up (i.e
-    greater than PAGE_SIZE chunks in one shot)
-4.  At the same time, ability to retain independent identity of i/os from
-    different sources or i/o units requiring individual completion (e.g. for
-    latency reasons)
-5.  Ability to represent an i/o involving multiple physical memory segments
-    (including non-page aligned page fragments, as specified via readv/writev)
-    without unnecessarily breaking it up, if the underlying device is capable of
-    handling it.
-6.  Preferably should be based on a memory descriptor structure that can be
-    passed around different types of subsystems or layers, maybe even
-    networking, without duplication or extra copies of data/descriptor fields
-    themselves in the process
-7.  Ability to handle the possibility of splits/merges as the structure passes
-    through layered drivers (lvm, md, evms), with minimal overhead.
-
-The solution was to define a new structure (bio)  for the block layer,
-instead of using the buffer head structure (bh) directly, the idea being
-avoidance of some associated baggage and limitations. The bio structure
-is uniformly used for all i/o at the block layer ; it forms a part of the
-bh structure for buffered i/o, and in the case of raw/direct i/o kiobufs are
-mapped to bio structures.
-
-2.2 The bio struct
-------------------
-
-The bio structure uses a vector representation pointing to an array of tuples
-of <page, offset, len> to describe the i/o buffer, and has various other
-fields describing i/o parameters and state that needs to be maintained for
-performing the i/o.
-
-Notice that this representation means that a bio has no virtual address
-mapping at all (unlike buffer heads).
-
-::
-
-  struct bio_vec {
-       struct page     *bv_page;
-       unsigned short  bv_len;
-       unsigned short  bv_offset;
-  };
-
-  /*
-   * main unit of I/O for the block layer and lower layers (ie drivers)
-   */
-  struct bio {
-       struct bio          *bi_next;    /* request queue link */
-       struct block_device *bi_bdev;	/* target device */
-       unsigned long       bi_flags;    /* status, command, etc */
-       unsigned long       bi_opf;       /* low bits: r/w, high: priority */
-
-       unsigned int	bi_vcnt;     /* how may bio_vec's */
-       struct bvec_iter	bi_iter;	/* current index into bio_vec array */
-
-       unsigned int	bi_size;     /* total size in bytes */
-       unsigned short	bi_hw_segments; /* segments after DMA remapping */
-       unsigned int	bi_max;	     /* max bio_vecs we can hold
-                                        used as index into pool */
-       struct bio_vec   *bi_io_vec;  /* the actual vec list */
-       bio_end_io_t	*bi_end_io;  /* bi_end_io (bio) */
-       atomic_t		bi_cnt;	     /* pin count: free when it hits zero */
-       void             *bi_private;
-  };
-
-With this multipage bio design:
-
-- Large i/os can be sent down in one go using a bio_vec list consisting
-  of an array of <page, offset, len> fragments (similar to the way fragments
-  are represented in the zero-copy network code)
-- Splitting of an i/o request across multiple devices (as in the case of
-  lvm or raid) is achieved by cloning the bio (where the clone points to
-  the same bi_io_vec array, but with the index and size accordingly modified)
-- A linked list of bios is used as before for unrelated merges [#]_ - this
-  avoids reallocs and makes independent completions easier to handle.
-- Code that traverses the req list can find all the segments of a bio
-  by using rq_for_each_segment.  This handles the fact that a request
-  has multiple bios, each of which can have multiple segments.
-- Drivers which can't process a large bio in one shot can use the bi_iter
-  field to keep track of the next bio_vec entry to process.
-  (e.g a 1MB bio_vec needs to be handled in max 128kB chunks for IDE)
-  [TBD: Should preferably also have a bi_voffset and bi_vlen to avoid modifying
-  bi_offset an len fields]
-
-.. [#]
-
-	unrelated merges -- a request ends up containing two or more bios that
-	didn't originate from the same place.
-
-bi_end_io() i/o callback gets called on i/o completion of the entire bio.
-
-At a lower level, drivers build a scatter gather list from the merged bios.
-The scatter gather list is in the form of an array of <page, offset, len>
-entries with their corresponding dma address mappings filled in at the
-appropriate time. As an optimization, contiguous physical pages can be
-covered by a single entry where <page> refers to the first page and <len>
-covers the range of pages (up to 16 contiguous pages could be covered this
-way). There is a helper routine (blk_rq_map_sg) which drivers can use to build
-the sg list.
-
-Note: Right now the only user of bios with more than one page is ll_rw_kio,
-which in turn means that only raw I/O uses it (direct i/o may not work
-right now). The intent however is to enable clustering of pages etc to
-become possible. The pagebuf abstraction layer from SGI also uses multi-page
-bios, but that is currently not included in the stock development kernels.
-The same is true of Andrew Morton's work-in-progress multipage bio writeout
-and readahead patches.
-
-2.3 Changes in the Request Structure
-------------------------------------
-
-The request structure is the structure that gets passed down to low level
-drivers. The block layer make_request function builds up a request structure,
-places it on the queue and invokes the drivers request_fn. The driver makes
-use of block layer helper routine elv_next_request to pull the next request
-off the queue. Control or diagnostic functions might bypass block and directly
-invoke underlying driver entry points passing in a specially constructed
-request structure.
-
-Only some relevant fields (mainly those which changed or may be referred
-to in some of the discussion here) are listed below, not necessarily in
-the order in which they occur in the structure (see include/linux/blkdev.h)
-Refer to Documentation/block/request.rst for details about all the request
-structure fields and a quick reference about the layers which are
-supposed to use or modify those fields::
-
-  struct request {
-	struct list_head queuelist;  /* Not meant to be directly accessed by
-					the driver.
-					Used by q->elv_next_request_fn
-					rq->queue is gone
-					*/
-	.
-	.
-	unsigned char cmd[16]; /* prebuilt command data block */
-	unsigned long flags;   /* also includes earlier rq->cmd settings */
-	.
-	.
-	sector_t sector; /* this field is now of type sector_t instead of int
-			    preparation for 64 bit sectors */
-	.
-	.
-
-	/* Number of scatter-gather DMA addr+len pairs after
-	 * physical address coalescing is performed.
-	 */
-	unsigned short nr_phys_segments;
-
-	/* Number of scatter-gather addr+len pairs after
-	 * physical and DMA remapping hardware coalescing is performed.
-	 * This is the number of scatter-gather entries the driver
-	 * will actually have to deal with after DMA mapping is done.
-	 */
-	unsigned short nr_hw_segments;
-
-	/* Various sector counts */
-	unsigned long nr_sectors;  /* no. of sectors left: driver modifiable */
-	unsigned long hard_nr_sectors;  /* block internal copy of above */
-	unsigned int current_nr_sectors; /* no. of sectors left in the
-					   current segment:driver modifiable */
-	unsigned long hard_cur_sectors; /* block internal copy of the above */
-	.
-	.
-	int tag;	/* command tag associated with request */
-	void *special;  /* same as before */
-	char *buffer;   /* valid only for low memory buffers up to
-			 current_nr_sectors */
-	.
-	.
-	struct bio *bio, *biotail;  /* bio list instead of bh */
-	struct request_list *rl;
-  }
-
-See the req_ops and req_flag_bits definitions for an explanation of the various
-flags available. Some bits are used by the block layer or i/o scheduler.
-
-The behaviour of the various sector counts are almost the same as before,
-except that since we have multi-segment bios, current_nr_sectors refers
-to the numbers of sectors in the current segment being processed which could
-be one of the many segments in the current bio (i.e i/o completion unit).
-The nr_sectors value refers to the total number of sectors in the whole
-request that remain to be transferred (no change). The purpose of the
-hard_xxx values is for block to remember these counts every time it hands
-over the request to the driver. These values are updated by block on
-end_that_request_first, i.e. every time the driver completes a part of the
-transfer and invokes block end*request helpers to mark this. The
-driver should not modify these values. The block layer sets up the
-nr_sectors and current_nr_sectors fields (based on the corresponding
-hard_xxx values and the number of bytes transferred) and updates it on
-every transfer that invokes end_that_request_first. It does the same for the
-buffer, bio, bio->bi_iter fields too.
-
-The buffer field is just a virtual address mapping of the current segment
-of the i/o buffer in cases where the buffer resides in low-memory. For high
-memory i/o, this field is not valid and must not be used by drivers.
-
-Code that sets up its own request structures and passes them down to
-a driver needs to be careful about interoperation with the block layer helper
-functions which the driver uses. (Section 1.3)
-
-3. Using bios
-=============
-
-3.1 Setup/Teardown
-------------------
-
-There are routines for managing the allocation, and reference counting, and
-freeing of bios (bio_alloc, bio_get, bio_put).
-
-This makes use of Ingo Molnar's mempool implementation, which enables
-subsystems like bio to maintain their own reserve memory pools for guaranteed
-deadlock-free allocations during extreme VM load. For example, the VM
-subsystem makes use of the block layer to writeout dirty pages in order to be
-able to free up memory space, a case which needs careful handling. The
-allocation logic draws from the preallocated emergency reserve in situations
-where it cannot allocate through normal means. If the pool is empty and it
-can wait, then it would trigger action that would help free up memory or
-replenish the pool (without deadlocking) and wait for availability in the pool.
-If it is in IRQ context, and hence not in a position to do this, allocation
-could fail if the pool is empty. In general mempool always first tries to
-perform allocation without having to wait, even if it means digging into the
-pool as long it is not less that 50% full.
-
-On a free, memory is released to the pool or directly freed depending on
-the current availability in the pool. The mempool interface lets the
-subsystem specify the routines to be used for normal alloc and free. In the
-case of bio, these routines make use of the standard slab allocator.
-
-The caller of bio_alloc is expected to taken certain steps to avoid
-deadlocks, e.g. avoid trying to allocate more memory from the pool while
-already holding memory obtained from the pool.
-
-::
-
-  [TBD: This is a potential issue, though a rare possibility
-   in the bounce bio allocation that happens in the current code, since
-   it ends up allocating a second bio from the same pool while
-   holding the original bio ]
-
-Memory allocated from the pool should be released back within a limited
-amount of time (in the case of bio, that would be after the i/o is completed).
-This ensures that if part of the pool has been used up, some work (in this
-case i/o) must already be in progress and memory would be available when it
-is over. If allocating from multiple pools in the same code path, the order
-or hierarchy of allocation needs to be consistent, just the way one deals
-with multiple locks.
-
-The bio_alloc routine also needs to allocate the bio_vec_list (bvec_alloc())
-for a non-clone bio. There are the 6 pools setup for different size biovecs,
-so bio_alloc(gfp_mask, nr_iovecs) will allocate a vec_list of the
-given size from these slabs.
-
-The bio_get() routine may be used to hold an extra reference on a bio prior
-to i/o submission, if the bio fields are likely to be accessed after the
-i/o is issued (since the bio may otherwise get freed in case i/o completion
-happens in the meantime).
-
-The bio_clone_fast() routine may be used to duplicate a bio, where the clone
-shares the bio_vec_list with the original bio (i.e. both point to the
-same bio_vec_list). This would typically be used for splitting i/o requests
-in lvm or md.
-
-3.2 Generic bio helper Routines
--------------------------------
-
-3.2.1 Traversing segments and completion units in a request
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The macro rq_for_each_segment() should be used for traversing the bios
-in the request list (drivers should avoid directly trying to do it
-themselves). Using these helpers should also make it easier to cope
-with block changes in the future.
-
-::
-
-	struct req_iterator iter;
-	rq_for_each_segment(bio_vec, rq, iter)
-		/* bio_vec is now current segment */
-
-I/O completion callbacks are per-bio rather than per-segment, so drivers
-that traverse bio chains on completion need to keep that in mind. Drivers
-which don't make a distinction between segments and completion units would
-need to be reorganized to support multi-segment bios.
-
-3.2.2 Setting up DMA scatterlists
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-The blk_rq_map_sg() helper routine would be used for setting up scatter
-gather lists from a request, so a driver need not do it on its own.
-
-	nr_segments = blk_rq_map_sg(q, rq, scatterlist);
-
-The helper routine provides a level of abstraction which makes it easier
-to modify the internals of request to scatterlist conversion down the line
-without breaking drivers. The blk_rq_map_sg routine takes care of several
-things like collapsing physically contiguous segments (if QUEUE_FLAG_CLUSTER
-is set) and correct segment accounting to avoid exceeding the limits which
-the i/o hardware can handle, based on various queue properties.
-
-- Prevents a clustered segment from crossing a 4GB mem boundary
-- Avoids building segments that would exceed the number of physical
-  memory segments that the driver can handle (phys_segments) and the
-  number that the underlying hardware can handle at once, accounting for
-  DMA remapping (hw_segments)  (i.e. IOMMU aware limits).
-
-Routines which the low level driver can use to set up the segment limits:
-
-blk_queue_max_hw_segments() : Sets an upper limit of the maximum number of
-hw data segments in a request (i.e. the maximum number of address/length
-pairs the host adapter can actually hand to the device at once)
-
-blk_queue_max_phys_segments() : Sets an upper limit on the maximum number
-of physical data segments in a request (i.e. the largest sized scatter list
-a driver could handle)
-
-3.2.3 I/O completion
-^^^^^^^^^^^^^^^^^^^^
-
-The existing generic block layer helper routines end_request,
-end_that_request_first and end_that_request_last can be used for i/o
-completion (and setting things up so the rest of the i/o or the next
-request can be kicked of) as before. With the introduction of multi-page
-bio support, end_that_request_first requires an additional argument indicating
-the number of sectors completed.
-
-3.2.4 Implications for drivers that do not interpret bios
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-(don't handle multiple segments)
-
-Drivers that do not interpret bios e.g those which do not handle multiple
-segments and do not support i/o into high memory addresses (require bounce
-buffers) and expect only virtually mapped buffers, can access the rq->buffer
-field. As before the driver should use current_nr_sectors to determine the
-size of remaining data in the current segment (that is the maximum it can
-transfer in one go unless it interprets segments), and rely on the block layer
-end_request, or end_that_request_first/last to take care of all accounting
-and transparent mapping of the next bio segment when a segment boundary
-is crossed on completion of a transfer. (The end*request* functions should
-be used if only if the request has come down from block/bio path, not for
-direct access requests which only specify rq->buffer without a valid rq->bio)
-
-3.3 I/O Submission
-------------------
-
-The routine submit_bio() is used to submit a single io. Higher level i/o
-routines make use of this:
-
-(a) Buffered i/o:
-
-The routine submit_bh() invokes submit_bio() on a bio corresponding to the
-bh, allocating the bio if required. ll_rw_block() uses submit_bh() as before.
-
-(b) Kiobuf i/o (for raw/direct i/o):
-
-The ll_rw_kio() routine breaks up the kiobuf into page sized chunks and
-maps the array to one or more multi-page bios, issuing submit_bio() to
-perform the i/o on each of these.
-
-The embedded bh array in the kiobuf structure has been removed and no
-preallocation of bios is done for kiobufs. [The intent is to remove the
-blocks array as well, but it's currently in there to kludge around direct i/o.]
-Thus kiobuf allocation has switched back to using kmalloc rather than vmalloc.
-
-Todo/Observation:
-
- A single kiobuf structure is assumed to correspond to a contiguous range
- of data, so brw_kiovec() invokes ll_rw_kio for each kiobuf in a kiovec.
- So right now it wouldn't work for direct i/o on non-contiguous blocks.
- This is to be resolved.  The eventual direction is to replace kiobuf
- by kvec's.
-
- Badari Pulavarty has a patch to implement direct i/o correctly using
- bio and kvec.
-
-
-(c) Page i/o:
-
-Todo/Under discussion:
-
- Andrew Morton's multi-page bio patches attempt to issue multi-page
- writeouts (and reads) from the page cache, by directly building up
- large bios for submission completely bypassing the usage of buffer
- heads. This work is still in progress.
-
- Christoph Hellwig had some code that uses bios for page-io (rather than
- bh). This isn't included in bio as yet. Christoph was also working on a
- design for representing virtual/real extents as an entity and modifying
- some of the address space ops interfaces to utilize this abstraction rather
- than buffer_heads. (This is somewhat along the lines of the SGI XFS pagebuf
- abstraction, but intended to be as lightweight as possible).
-
-(d) Direct access i/o:
-
-Direct access requests that do not contain bios would be submitted differently
-as discussed earlier in section 1.3.
-
-Aside:
-
-  Kvec i/o:
-
-  Ben LaHaise's aio code uses a slightly different structure instead
-  of kiobufs, called a kvec_cb. This contains an array of <page, offset, len>
-  tuples (very much like the networking code), together with a callback function
-  and data pointer. This is embedded into a brw_cb structure when passed
-  to brw_kvec_async().
-
-  Now it should be possible to directly map these kvecs to a bio. Just as while
-  cloning, in this case rather than PRE_BUILT bio_vecs, we set the bi_io_vec
-  array pointer to point to the veclet array in kvecs.
-
-  TBD: In order for this to work, some changes are needed in the way multi-page
-  bios are handled today. The values of the tuples in such a vector passed in
-  from higher level code should not be modified by the block layer in the course
-  of its request processing, since that would make it hard for the higher layer
-  to continue to use the vector descriptor (kvec) after i/o completes. Instead,
-  all such transient state should either be maintained in the request structure,
-  and passed on in some way to the endio completion routine.
-
-
-4. The I/O scheduler
-====================
-
-I/O scheduler, a.k.a. elevator, is implemented in two layers.  Generic dispatch
-queue and specific I/O schedulers.  Unless stated otherwise, elevator is used
-to refer to both parts and I/O scheduler to specific I/O schedulers.
-
-Block layer implements generic dispatch queue in `block/*.c`.
-The generic dispatch queue is responsible for requeueing, handling non-fs
-requests and all other subtleties.
-
-Specific I/O schedulers are responsible for ordering normal filesystem
-requests.  They can also choose to delay certain requests to improve
-throughput or whatever purpose.  As the plural form indicates, there are
-multiple I/O schedulers.  They can be built as modules but at least one should
-be built inside the kernel.  Each queue can choose different one and can also
-change to another one dynamically.
-
-A block layer call to the i/o scheduler follows the convention elv_xxx(). This
-calls elevator_xxx_fn in the elevator switch (block/elevator.c). Oh, xxx
-and xxx might not match exactly, but use your imagination. If an elevator
-doesn't implement a function, the switch does nothing or some minimal house
-keeping work.
-
-4.1. I/O scheduler API
-----------------------
-
-The functions an elevator may implement are: (* are mandatory)
-
-=============================== ================================================
-elevator_merge_fn		called to query requests for merge with a bio
-
-elevator_merge_req_fn		called when two requests get merged. the one
-				which gets merged into the other one will be
-				never seen by I/O scheduler again. IOW, after
-				being merged, the request is gone.
-
-elevator_merged_fn		called when a request in the scheduler has been
-				involved in a merge. It is used in the deadline
-				scheduler for example, to reposition the request
-				if its sorting order has changed.
-
-elevator_allow_merge_fn		called whenever the block layer determines
-				that a bio can be merged into an existing
-				request safely. The io scheduler may still
-				want to stop a merge at this point if it
-				results in some sort of conflict internally,
-				this hook allows it to do that. Note however
-				that two *requests* can still be merged at later
-				time. Currently the io scheduler has no way to
-				prevent that. It can only learn about the fact
-				from elevator_merge_req_fn callback.
-
-elevator_dispatch_fn*		fills the dispatch queue with ready requests.
-				I/O schedulers are free to postpone requests by
-				not filling the dispatch queue unless @force
-				is non-zero.  Once dispatched, I/O schedulers
-				are not allowed to manipulate the requests -
-				they belong to generic dispatch queue.
-
-elevator_add_req_fn*		called to add a new request into the scheduler
-
-elevator_former_req_fn
-elevator_latter_req_fn		These return the request before or after the
-				one specified in disk sort order. Used by the
-				block layer to find merge possibilities.
-
-elevator_completed_req_fn	called when a request is completed.
-
-elevator_set_req_fn
-elevator_put_req_fn		Must be used to allocate and free any elevator
-				specific storage for a request.
-
-elevator_activate_req_fn	Called when device driver first sees a request.
-				I/O schedulers can use this callback to
-				determine when actual execution of a request
-				starts.
-elevator_deactivate_req_fn	Called when device driver decides to delay
-				a request by requeueing it.
-
-elevator_init_fn*
-elevator_exit_fn		Allocate and free any elevator specific storage
-				for a queue.
-=============================== ================================================
-
-4.2 Request flows seen by I/O schedulers
-----------------------------------------
-
-All requests seen by I/O schedulers strictly follow one of the following three
-flows.
-
- set_req_fn ->
-
- i.   add_req_fn -> (merged_fn ->)* -> dispatch_fn -> activate_req_fn ->
-      (deactivate_req_fn -> activate_req_fn ->)* -> completed_req_fn
- ii.  add_req_fn -> (merged_fn ->)* -> merge_req_fn
- iii. [none]
-
- -> put_req_fn
-
-4.3 I/O scheduler implementation
---------------------------------
-
-The generic i/o scheduler algorithm attempts to sort/merge/batch requests for
-optimal disk scan and request servicing performance (based on generic
-principles and device capabilities), optimized for:
-
-i.   improved throughput
-ii.  improved latency
-iii. better utilization of h/w & CPU time
-
-Characteristics:
-
-i. Binary tree
-AS and deadline i/o schedulers use red black binary trees for disk position
-sorting and searching, and a fifo linked list for time-based searching. This
-gives good scalability and good availability of information. Requests are
-almost always dispatched in disk sort order, so a cache is kept of the next
-request in sort order to prevent binary tree lookups.
-
-This arrangement is not a generic block layer characteristic however, so
-elevators may implement queues as they please.
-
-ii. Merge hash
-AS and deadline use a hash table indexed by the last sector of a request. This
-enables merging code to quickly look up "back merge" candidates, even when
-multiple I/O streams are being performed at once on one disk.
-
-"Front merges", a new request being merged at the front of an existing request,
-are far less common than "back merges" due to the nature of most I/O patterns.
-Front merges are handled by the binary trees in AS and deadline schedulers.
-
-iii. Plugging the queue to batch requests in anticipation of opportunities for
-     merge/sort optimizations
-
-Plugging is an approach that the current i/o scheduling algorithm resorts to so
-that it collects up enough requests in the queue to be able to take
-advantage of the sorting/merging logic in the elevator. If the
-queue is empty when a request comes in, then it plugs the request queue
-(sort of like plugging the bath tub of a vessel to get fluid to build up)
-till it fills up with a few more requests, before starting to service
-the requests. This provides an opportunity to merge/sort the requests before
-passing them down to the device. There are various conditions when the queue is
-unplugged (to open up the flow again), either through a scheduled task or
-could be on demand. For example wait_on_buffer sets the unplugging going
-through sync_buffer() running blk_run_address_space(mapping). Or the caller
-can do it explicity through blk_unplug(bdev). So in the read case,
-the queue gets explicitly unplugged as part of waiting for completion on that
-buffer.
-
-Aside:
-  This is kind of controversial territory, as it's not clear if plugging is
-  always the right thing to do. Devices typically have their own queues,
-  and allowing a big queue to build up in software, while letting the device be
-  idle for a while may not always make sense. The trick is to handle the fine
-  balance between when to plug and when to open up. Also now that we have
-  multi-page bios being queued in one shot, we may not need to wait to merge
-  a big request from the broken up pieces coming by.
-
-4.4 I/O contexts
-----------------
-
-I/O contexts provide a dynamically allocated per process data area. They may
-be used in I/O schedulers, and in the block layer (could be used for IO statis,
-priorities for example). See `*io_context` in block/ll_rw_blk.c, and as-iosched.c
-for an example of usage in an i/o scheduler.
-
-
-5. Scalability related changes
-==============================
-
-5.1 Granular Locking: io_request_lock replaced by a per-queue lock
-------------------------------------------------------------------
-
-The global io_request_lock has been removed as of 2.5, to avoid
-the scalability bottleneck it was causing, and has been replaced by more
-granular locking. The request queue structure has a pointer to the
-lock to be used for that queue. As a result, locking can now be
-per-queue, with a provision for sharing a lock across queues if
-necessary (e.g the scsi layer sets the queue lock pointers to the
-corresponding adapter lock, which results in a per host locking
-granularity). The locking semantics are the same, i.e. locking is
-still imposed by the block layer, grabbing the lock before
-request_fn execution which it means that lots of older drivers
-should still be SMP safe. Drivers are free to drop the queue
-lock themselves, if required. Drivers that explicitly used the
-io_request_lock for serialization need to be modified accordingly.
-Usually it's as easy as adding a global lock::
-
-	static DEFINE_SPINLOCK(my_driver_lock);
-
-and passing the address to that lock to blk_init_queue().
-
-5.2 64 bit sector numbers (sector_t prepares for 64 bit support)
-----------------------------------------------------------------
-
-The sector number used in the bio structure has been changed to sector_t,
-which could be defined as 64 bit in preparation for 64 bit sector support.
-
-6. Other Changes/Implications
-=============================
-
-6.1 Partition re-mapping handled by the generic block layer
------------------------------------------------------------
-
-In 2.5 some of the gendisk/partition related code has been reorganized.
-Now the generic block layer performs partition-remapping early and thus
-provides drivers with a sector number relative to whole device, rather than
-having to take partition number into account in order to arrive at the true
-sector number. The routine blk_partition_remap() is invoked by
-submit_bio_noacct even before invoking the queue specific ->submit_bio,
-so the i/o scheduler also gets to operate on whole disk sector numbers. This
-should typically not require changes to block drivers, it just never gets
-to invoke its own partition sector offset calculations since all bios
-sent are offset from the beginning of the device.
-
-
-7. A Few Tips on Migration of older drivers
-===========================================
-
-Old-style drivers that just use CURRENT and ignores clustered requests,
-may not need much change.  The generic layer will automatically handle
-clustered requests, multi-page bios, etc for the driver.
-
-For a low performance driver or hardware that is PIO driven or just doesn't
-support scatter-gather changes should be minimal too.
-
-The following are some points to keep in mind when converting old drivers
-to bio.
-
-Drivers should use elv_next_request to pick up requests and are no longer
-supposed to handle looping directly over the request list.
-(struct request->queue has been removed)
-
-Now end_that_request_first takes an additional number_of_sectors argument.
-It used to handle always just the first buffer_head in a request, now
-it will loop and handle as many sectors (on a bio-segment granularity)
-as specified.
-
-Now bh->b_end_io is replaced by bio->bi_end_io, but most of the time the
-right thing to use is bio_endio(bio) instead.
-
-If the driver is dropping the io_request_lock from its request_fn strategy,
-then it just needs to replace that with q->queue_lock instead.
-
-As described in Sec 1.1, drivers can set max sector size, max segment size
-etc per queue now. Drivers that used to define their own merge functions i
-to handle things like this can now just use the blk_queue_* functions at
-blk_init_queue time.
-
-Drivers no longer have to map a {partition, sector offset} into the
-correct absolute location anymore, this is done by the block layer, so
-where a driver received a request ala this before::
-
-	rq->rq_dev = mk_kdev(3, 5);	/* /dev/hda5 */
-	rq->sector = 0;			/* first sector on hda5 */
-
-it will now see::
-
-	rq->rq_dev = mk_kdev(3, 0);	/* /dev/hda */
-	rq->sector = 123128;		/* offset from start of disk */
-
-As mentioned, there is no virtual mapping of a bio. For DMA, this is
-not a problem as the driver probably never will need a virtual mapping.
-Instead it needs a bus mapping (dma_map_page for a single segment or
-use dma_map_sg for scatter gather) to be able to ship it to the driver. For
-PIO drivers (or drivers that need to revert to PIO transfer once in a
-while (IDE for example)), where the CPU is doing the actual data
-transfer a virtual mapping is needed. If the driver supports highmem I/O,
-(Sec 1.1, (ii) ) it needs to use kmap_atomic or similar to temporarily map
-a bio into the virtual address space.
-
-
-8. Prior/Related/Impacted patches
-=================================
-
-8.1. Earlier kiobuf patches (sct/axboe/chait/hch/mkp)
------------------------------------------------------
-
-- orig kiobuf & raw i/o patches (now in 2.4 tree)
-- direct kiobuf based i/o to devices (no intermediate bh's)
-- page i/o using kiobuf
-- kiobuf splitting for lvm (mkp)
-- elevator support for kiobuf request merging (axboe)
-
-8.2. Zero-copy networking (Dave Miller)
----------------------------------------
-
-8.3. SGI XFS - pagebuf patches - use of kiobufs
------------------------------------------------
-8.4. Multi-page pioent patch for bio (Christoph Hellwig)
---------------------------------------------------------
-8.5. Direct i/o implementation (Andrea Arcangeli) since 2.4.10-pre11
---------------------------------------------------------------------
-8.6. Async i/o implementation patch (Ben LaHaise)
--------------------------------------------------
-8.7. EVMS layering design (IBM EVMS team)
------------------------------------------
-8.8. Larger page cache size patch (Ben LaHaise) and Large page size (Daniel Phillips)
--------------------------------------------------------------------------------------
-
-    => larger contiguous physical memory buffers
-
-8.9. VM reservations patch (Ben LaHaise)
-----------------------------------------
-8.10. Write clustering patches ? (Marcelo/Quintela/Riel ?)
-----------------------------------------------------------
-8.11. Block device in page cache patch (Andrea Archangeli) - now in 2.4.10+
----------------------------------------------------------------------------
-8.12. Multiple block-size transfers for faster raw i/o (Shailabh Nagar, Badari)
--------------------------------------------------------------------------------
-8.13  Priority based i/o scheduler - prepatches (Arjan van de Ven)
-------------------------------------------------------------------
-8.14  IDE Taskfile i/o patch (Andre Hedrick)
---------------------------------------------
-8.15  Multi-page writeout and readahead patches (Andrew Morton)
----------------------------------------------------------------
-8.16  Direct i/o patches for 2.5 using kvec and bio (Badari Pulavarthy)
------------------------------------------------------------------------
-
-9. Other References
-===================
-
-9.1 The Splice I/O Model
-------------------------
-
-Larry McVoy (and subsequent discussions on lkml, and Linus' comments - Jan 2001
-
-9.2 Discussions about kiobuf and bh design
-------------------------------------------
-
-On lkml between sct, linus, alan et al - Feb-March 2001 (many of the
-initial thoughts that led to bio were brought up in this discussion thread)
-
-9.3 Discussions on mempool on lkml - Dec 2001.
-----------------------------------------------
diff --git a/Documentation/block/capability.rst b/Documentation/block/capability.rst
deleted file mode 100644
index 160a5148b915..000000000000
--- a/Documentation/block/capability.rst
+++ /dev/null
@@ -1,10 +0,0 @@
-===============================
-Generic Block Device Capability
-===============================
-
-This file documents the sysfs file ``block/<disk>/capability``.
-
-``capability`` is a bitfield, printed in hexadecimal, indicating which
-capabilities a specific block device supports:
-
-.. kernel-doc:: include/linux/genhd.h
diff --git a/Documentation/block/index.rst b/Documentation/block/index.rst
index 86dcf7159f99..9fea696f9daa 100644
--- a/Documentation/block/index.rst
+++ b/Documentation/block/index.rst
@@ -8,10 +8,8 @@ Block
    :maxdepth: 1
 
    bfq-iosched
-   biodoc
    biovecs
    blk-mq
-   capability
    cmdline-partition
    data-integrity
    deadline-iosched
@@ -20,8 +18,7 @@ Block
    kyber-iosched
    null_blk
    pr
-   queue-sysfs
-   request
    stat
    switching-sched
    writeback_cache_control
+   ublk
diff --git a/Documentation/block/inline-encryption.rst b/Documentation/block/inline-encryption.rst
index 7f9b40d6b416..90b733422ed4 100644
--- a/Documentation/block/inline-encryption.rst
+++ b/Documentation/block/inline-encryption.rst
@@ -1,5 +1,7 @@
 .. SPDX-License-Identifier: GPL-2.0
 
+.. _inline_encryption:
+
 =================
 Inline Encryption
 =================
@@ -7,230 +9,268 @@ Inline Encryption
 Background
 ==========
 
-Inline encryption hardware sits logically between memory and the disk, and can
-en/decrypt data as it goes in/out of the disk. Inline encryption hardware has a
-fixed number of "keyslots" - slots into which encryption contexts (i.e. the
-encryption key, encryption algorithm, data unit size) can be programmed by the
-kernel at any time. Each request sent to the disk can be tagged with the index
-of a keyslot (and also a data unit number to act as an encryption tweak), and
-the inline encryption hardware will en/decrypt the data in the request with the
-encryption context programmed into that keyslot. This is very different from
-full disk encryption solutions like self encrypting drives/TCG OPAL/ATA
-Security standards, since with inline encryption, any block on disk could be
-encrypted with any encryption context the kernel chooses.
-
+Inline encryption hardware sits logically between memory and disk, and can
+en/decrypt data as it goes in/out of the disk.  For each I/O request, software
+can control exactly how the inline encryption hardware will en/decrypt the data
+in terms of key, algorithm, data unit size (the granularity of en/decryption),
+and data unit number (a value that determines the initialization vector(s)).
+
+Some inline encryption hardware accepts all encryption parameters including raw
+keys directly in low-level I/O requests.  However, most inline encryption
+hardware instead has a fixed number of "keyslots" and requires that the key,
+algorithm, and data unit size first be programmed into a keyslot.  Each
+low-level I/O request then just contains a keyslot index and data unit number.
+
+Note that inline encryption hardware is very different from traditional crypto
+accelerators, which are supported through the kernel crypto API.  Traditional
+crypto accelerators operate on memory regions, whereas inline encryption
+hardware operates on I/O requests.  Thus, inline encryption hardware needs to be
+managed by the block layer, not the kernel crypto API.
+
+Inline encryption hardware is also very different from "self-encrypting drives",
+such as those based on the TCG Opal or ATA Security standards.  Self-encrypting
+drives don't provide fine-grained control of encryption and provide no way to
+verify the correctness of the resulting ciphertext.  Inline encryption hardware
+provides fine-grained control of encryption, including the choice of key and
+initialization vector for each sector, and can be tested for correctness.
 
 Objective
 =========
 
-We want to support inline encryption (IE) in the kernel.
-To allow for testing, we also want a crypto API fallback when actual
-IE hardware is absent. We also want IE to work with layered devices
-like dm and loopback (i.e. we want to be able to use the IE hardware
-of the underlying devices if present, or else fall back to crypto API
-en/decryption).
-
+We want to support inline encryption in the kernel.  To make testing easier, we
+also want support for falling back to the kernel crypto API when actual inline
+encryption hardware is absent.  We also want inline encryption to work with
+layered devices like device-mapper and loopback (i.e. we want to be able to use
+the inline encryption hardware of the underlying devices if present, or else
+fall back to crypto API en/decryption).
 
 Constraints and notes
 =====================
 
-- IE hardware has a limited number of "keyslots" that can be programmed
-  with an encryption context (key, algorithm, data unit size, etc.) at any time.
-  One can specify a keyslot in a data request made to the device, and the
-  device will en/decrypt the data using the encryption context programmed into
-  that specified keyslot. When possible, we want to make multiple requests with
-  the same encryption context share the same keyslot.
-
-- We need a way for upper layers like filesystems to specify an encryption
-  context to use for en/decrypting a struct bio, and a device driver (like UFS)
-  needs to be able to use that encryption context when it processes the bio.
-
-- We need a way for device drivers to expose their inline encryption
-  capabilities in a unified way to the upper layers.
-
-
-Design
-======
-
-We add a struct bio_crypt_ctx to struct bio that can
-represent an encryption context, because we need to be able to pass this
-encryption context from the upper layers (like the fs layer) to the
-device driver to act upon.
-
-While IE hardware works on the notion of keyslots, the FS layer has no
-knowledge of keyslots - it simply wants to specify an encryption context to
-use while en/decrypting a bio.
-
-We introduce a keyslot manager (KSM) that handles the translation from
-encryption contexts specified by the FS to keyslots on the IE hardware.
-This KSM also serves as the way IE hardware can expose its capabilities to
-upper layers. The generic mode of operation is: each device driver that wants
-to support IE will construct a KSM and set it up in its struct request_queue.
-Upper layers that want to use IE on this device can then use this KSM in
-the device's struct request_queue to translate an encryption context into
-a keyslot. The presence of the KSM in the request queue shall be used to mean
-that the device supports IE.
-
-The KSM uses refcounts to track which keyslots are idle (either they have no
-encryption context programmed, or there are no in-flight struct bios
-referencing that keyslot). When a new encryption context needs a keyslot, it
-tries to find a keyslot that has already been programmed with the same
-encryption context, and if there is no such keyslot, it evicts the least
-recently used idle keyslot and programs the new encryption context into that
-one. If no idle keyslots are available, then the caller will sleep until there
-is at least one.
-
-
-blk-mq changes, other block layer changes and blk-crypto-fallback
-=================================================================
-
-We add a pointer to a ``bi_crypt_context`` and ``keyslot`` to
-struct request. These will be referred to as the ``crypto fields``
-for the request. This ``keyslot`` is the keyslot into which the
-``bi_crypt_context`` has been programmed in the KSM of the ``request_queue``
-that this request is being sent to.
-
-We introduce ``block/blk-crypto-fallback.c``, which allows upper layers to remain
-blissfully unaware of whether or not real inline encryption hardware is present
-underneath. When a bio is submitted with a target ``request_queue`` that doesn't
-support the encryption context specified with the bio, the block layer will
-en/decrypt the bio with the blk-crypto-fallback.
-
-If the bio is a ``WRITE`` bio, a bounce bio is allocated, and the data in the bio
-is encrypted stored in the bounce bio - blk-mq will then proceed to process the
-bounce bio as if it were not encrypted at all (except when blk-integrity is
-concerned). ``blk-crypto-fallback`` sets the bounce bio's ``bi_end_io`` to an
-internal function that cleans up the bounce bio and ends the original bio.
-
-If the bio is a ``READ`` bio, the bio's ``bi_end_io`` (and also ``bi_private``)
-is saved and overwritten by ``blk-crypto-fallback`` to
-``bio_crypto_fallback_decrypt_bio``.  The bio's ``bi_crypt_context`` is also
-overwritten with ``NULL``, so that to the rest of the stack, the bio looks
-as if it was a regular bio that never had an encryption context specified.
-``bio_crypto_fallback_decrypt_bio`` will decrypt the bio, restore the original
-``bi_end_io`` (and also ``bi_private``) and end the bio again.
-
-Regardless of whether real inline encryption hardware is used or the
+- We need a way for upper layers (e.g. filesystems) to specify an encryption
+  context to use for en/decrypting a bio, and device drivers (e.g. UFSHCD) need
+  to be able to use that encryption context when they process the request.
+  Encryption contexts also introduce constraints on bio merging; the block layer
+  needs to be aware of these constraints.
+
+- Different inline encryption hardware has different supported algorithms,
+  supported data unit sizes, maximum data unit numbers, etc.  We call these
+  properties the "crypto capabilities".  We need a way for device drivers to
+  advertise crypto capabilities to upper layers in a generic way.
+
+- Inline encryption hardware usually (but not always) requires that keys be
+  programmed into keyslots before being used.  Since programming keyslots may be
+  slow and there may not be very many keyslots, we shouldn't just program the
+  key for every I/O request, but rather keep track of which keys are in the
+  keyslots and reuse an already-programmed keyslot when possible.
+
+- Upper layers typically define a specific end-of-life for crypto keys, e.g.
+  when an encrypted directory is locked or when a crypto mapping is torn down.
+  At these times, keys are wiped from memory.  We must provide a way for upper
+  layers to also evict keys from any keyslots they are present in.
+
+- When possible, device-mapper devices must be able to pass through the inline
+  encryption support of their underlying devices.  However, it doesn't make
+  sense for device-mapper devices to have keyslots themselves.
+
+Basic design
+============
+
+We introduce ``struct blk_crypto_key`` to represent an inline encryption key and
+how it will be used.  This includes the actual bytes of the key; the size of the
+key; the algorithm and data unit size the key will be used with; and the number
+of bytes needed to represent the maximum data unit number the key will be used
+with.
+
+We introduce ``struct bio_crypt_ctx`` to represent an encryption context.  It
+contains a data unit number and a pointer to a blk_crypto_key.  We add pointers
+to a bio_crypt_ctx to ``struct bio`` and ``struct request``; this allows users
+of the block layer (e.g. filesystems) to provide an encryption context when
+creating a bio and have it be passed down the stack for processing by the block
+layer and device drivers.  Note that the encryption context doesn't explicitly
+say whether to encrypt or decrypt, as that is implicit from the direction of the
+bio; WRITE means encrypt, and READ means decrypt.
+
+We also introduce ``struct blk_crypto_profile`` to contain all generic inline
+encryption-related state for a particular inline encryption device.  The
+blk_crypto_profile serves as the way that drivers for inline encryption hardware
+advertise their crypto capabilities and provide certain functions (e.g.,
+functions to program and evict keys) to upper layers.  Each device driver that
+wants to support inline encryption will construct a blk_crypto_profile, then
+associate it with the disk's request_queue.
+
+The blk_crypto_profile also manages the hardware's keyslots, when applicable.
+This happens in the block layer, so that users of the block layer can just
+specify encryption contexts and don't need to know about keyslots at all, nor do
+device drivers need to care about most details of keyslot management.
+
+Specifically, for each keyslot, the block layer (via the blk_crypto_profile)
+keeps track of which blk_crypto_key that keyslot contains (if any), and how many
+in-flight I/O requests are using it.  When the block layer creates a
+``struct request`` for a bio that has an encryption context, it grabs a keyslot
+that already contains the key if possible.  Otherwise it waits for an idle
+keyslot (a keyslot that isn't in-use by any I/O), then programs the key into the
+least-recently-used idle keyslot using the function the device driver provided.
+In both cases, the resulting keyslot is stored in the ``crypt_keyslot`` field of
+the request, where it is then accessible to device drivers and is released after
+the request completes.
+
+``struct request`` also contains a pointer to the original bio_crypt_ctx.
+Requests can be built from multiple bios, and the block layer must take the
+encryption context into account when trying to merge bios and requests.  For two
+bios/requests to be merged, they must have compatible encryption contexts: both
+unencrypted, or both encrypted with the same key and contiguous data unit
+numbers.  Only the encryption context for the first bio in a request is
+retained, since the remaining bios have been verified to be merge-compatible
+with the first bio.
+
+To make it possible for inline encryption to work with request_queue based
+layered devices, when a request is cloned, its encryption context is cloned as
+well.  When the cloned request is submitted, it is then processed as usual; this
+includes getting a keyslot from the clone's target device if needed.
+
+blk-crypto-fallback
+===================
+
+It is desirable for the inline encryption support of upper layers (e.g.
+filesystems) to be testable without real inline encryption hardware, and
+likewise for the block layer's keyslot management logic.  It is also desirable
+to allow upper layers to just always use inline encryption rather than have to
+implement encryption in multiple ways.
+
+Therefore, we also introduce *blk-crypto-fallback*, which is an implementation
+of inline encryption using the kernel crypto API.  blk-crypto-fallback is built
+into the block layer, so it works on any block device without any special setup.
+Essentially, when a bio with an encryption context is submitted to a
+block_device that doesn't support that encryption context, the block layer will
+handle en/decryption of the bio using blk-crypto-fallback.
+
+For encryption, the data cannot be encrypted in-place, as callers usually rely
+on it being unmodified.  Instead, blk-crypto-fallback allocates bounce pages,
+fills a new bio with those bounce pages, encrypts the data into those bounce
+pages, and submits that "bounce" bio.  When the bounce bio completes,
+blk-crypto-fallback completes the original bio.  If the original bio is too
+large, multiple bounce bios may be required; see the code for details.
+
+For decryption, blk-crypto-fallback "wraps" the bio's completion callback
+(``bi_complete``) and private data (``bi_private``) with its own, unsets the
+bio's encryption context, then submits the bio.  If the read completes
+successfully, blk-crypto-fallback restores the bio's original completion
+callback and private data, then decrypts the bio's data in-place using the
+kernel crypto API.  Decryption happens from a workqueue, as it may sleep.
+Afterwards, blk-crypto-fallback completes the bio.
+
+In both cases, the bios that blk-crypto-fallback submits no longer have an
+encryption context.  Therefore, lower layers only see standard unencrypted I/O.
+
+blk-crypto-fallback also defines its own blk_crypto_profile and has its own
+"keyslots"; its keyslots contain ``struct crypto_skcipher`` objects.  The reason
+for this is twofold.  First, it allows the keyslot management logic to be tested
+without actual inline encryption hardware.  Second, similar to actual inline
+encryption hardware, the crypto API doesn't accept keys directly in requests but
+rather requires that keys be set ahead of time, and setting keys can be
+expensive; moreover, allocating a crypto_skcipher can't happen on the I/O path
+at all due to the locks it takes.  Therefore, the concept of keyslots still
+makes sense for blk-crypto-fallback.
+
+Note that regardless of whether real inline encryption hardware or
 blk-crypto-fallback is used, the ciphertext written to disk (and hence the
-on-disk format of data) will be the same (assuming the hardware's implementation
-of the algorithm being used adheres to spec and functions correctly).
-
-If a ``request queue``'s inline encryption hardware claimed to support the
-encryption context specified with a bio, then it will not be handled by the
-``blk-crypto-fallback``. We will eventually reach a point in blk-mq when a
-struct request needs to be allocated for that bio. At that point,
-blk-mq tries to program the encryption context into the ``request_queue``'s
-keyslot_manager, and obtain a keyslot, which it stores in its newly added
-``keyslot`` field. This keyslot is released when the request is completed.
-
-When the first bio is added to a request, ``blk_crypto_rq_bio_prep`` is called,
-which sets the request's ``crypt_ctx`` to a copy of the bio's
-``bi_crypt_context``. bio_crypt_do_front_merge is called whenever a subsequent
-bio is merged to the front of the request, which updates the ``crypt_ctx`` of
-the request so that it matches the newly merged bio's ``bi_crypt_context``. In particular, the request keeps a copy of the ``bi_crypt_context`` of the first
-bio in its bio-list (blk-mq needs to be careful to maintain this invariant
-during bio and request merges).
-
-To make it possible for inline encryption to work with request queue based
-layered devices, when a request is cloned, its ``crypto fields`` are cloned as
-well. When the cloned request is submitted, blk-mq programs the
-``bi_crypt_context`` of the request into the clone's request_queue's keyslot
-manager, and stores the returned keyslot in the clone's ``keyslot``.
+on-disk format of data) will be the same (assuming that both the inline
+encryption hardware's implementation and the kernel crypto API's implementation
+of the algorithm being used adhere to spec and function correctly).
 
+blk-crypto-fallback is optional and is controlled by the
+``CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK`` kernel configuration option.
 
 API presented to users of the block layer
 =========================================
 
-``struct blk_crypto_key`` represents a crypto key (the raw key, size of the
-key, the crypto algorithm to use, the data unit size to use, and the number of
-bytes required to represent data unit numbers that will be specified with the
-``bi_crypt_context``).
-
-``blk_crypto_init_key`` allows upper layers to initialize such a
-``blk_crypto_key``.
-
-``bio_crypt_set_ctx`` should be called on any bio that a user of
-the block layer wants en/decrypted via inline encryption (or the
-blk-crypto-fallback, if hardware support isn't available for the desired
-crypto configuration). This function takes the ``blk_crypto_key`` and the
-data unit number (DUN) to use when en/decrypting the bio.
-
-``blk_crypto_config_supported`` allows upper layers to query whether or not the
-an encryption context passed to request queue can be handled by blk-crypto
-(either by real inline encryption hardware, or by the blk-crypto-fallback).
-This is useful e.g. when blk-crypto-fallback is disabled, and the upper layer
-wants to use an algorithm that may not supported by hardware - this function
-lets the upper layer know ahead of time that the algorithm isn't supported,
-and the upper layer can fallback to something else if appropriate.
-
-``blk_crypto_start_using_key`` - Upper layers must call this function on
-``blk_crypto_key`` and a ``request_queue`` before using the key with any bio
-headed for that ``request_queue``. This function ensures that either the
-hardware supports the key's crypto settings, or the crypto API fallback has
-transforms for the needed mode allocated and ready to go. Note that this
-function may allocate an ``skcipher``, and must not be called from the data
-path, since allocating ``skciphers`` from the data path can deadlock.
-
-``blk_crypto_evict_key`` *must* be called by upper layers before a
-``blk_crypto_key`` is freed. Further, it *must* only be called only once
-there are no more in-flight requests that use that ``blk_crypto_key``.
-``blk_crypto_evict_key`` will ensure that a key is removed from any keyslots in
-inline encryption hardware that the key might have been programmed into (or the blk-crypto-fallback).
+``blk_crypto_config_supported()`` allows users to check ahead of time whether
+inline encryption with particular crypto settings will work on a particular
+block_device -- either via hardware or via blk-crypto-fallback.  This function
+takes in a ``struct blk_crypto_config`` which is like blk_crypto_key, but omits
+the actual bytes of the key and instead just contains the algorithm, data unit
+size, etc.  This function can be useful if blk-crypto-fallback is disabled.
+
+``blk_crypto_init_key()`` allows users to initialize a blk_crypto_key.
+
+Users must call ``blk_crypto_start_using_key()`` before actually starting to use
+a blk_crypto_key on a block_device (even if ``blk_crypto_config_supported()``
+was called earlier).  This is needed to initialize blk-crypto-fallback if it
+will be needed.  This must not be called from the data path, as this may have to
+allocate resources, which may deadlock in that case.
+
+Next, to attach an encryption context to a bio, users should call
+``bio_crypt_set_ctx()``.  This function allocates a bio_crypt_ctx and attaches
+it to a bio, given the blk_crypto_key and the data unit number that will be used
+for en/decryption.  Users don't need to worry about freeing the bio_crypt_ctx
+later, as that happens automatically when the bio is freed or reset.
+
+Finally, when done using inline encryption with a blk_crypto_key on a
+block_device, users must call ``blk_crypto_evict_key()``.  This ensures that
+the key is evicted from all keyslots it may be programmed into and unlinked from
+any kernel data structures it may be linked into.
+
+In summary, for users of the block layer, the lifecycle of a blk_crypto_key is
+as follows:
+
+1. ``blk_crypto_config_supported()`` (optional)
+2. ``blk_crypto_init_key()``
+3. ``blk_crypto_start_using_key()``
+4. ``bio_crypt_set_ctx()`` (potentially many times)
+5. ``blk_crypto_evict_key()`` (after all I/O has completed)
+6. Zeroize the blk_crypto_key (this has no dedicated function)
+
+If a blk_crypto_key is being used on multiple block_devices, then
+``blk_crypto_config_supported()`` (if used), ``blk_crypto_start_using_key()``,
+and ``blk_crypto_evict_key()`` must be called on each block_device.
 
 API presented to device drivers
 ===============================
 
-A :c:type:``struct blk_keyslot_manager`` should be set up by device drivers in
-the ``request_queue`` of the device. The device driver needs to call
-``blk_ksm_init`` (or its resource-managed variant ``devm_blk_ksm_init``) on the
-``blk_keyslot_manager``, while specifying the number of keyslots supported by
-the hardware.
-
-The device driver also needs to tell the KSM how to actually manipulate the
-IE hardware in the device to do things like programming the crypto key into
-the IE hardware into a particular keyslot. All this is achieved through the
-struct blk_ksm_ll_ops field in the KSM that the device driver
-must fill up after initing the ``blk_keyslot_manager``.
-
-The KSM also handles runtime power management for the device when applicable
-(e.g. when it wants to program a crypto key into the IE hardware, the device
-must be runtime powered on) - so the device driver must also set the ``dev``
-field in the ksm to point to the `struct device` for the KSM to use for runtime
-power management.
-
-``blk_ksm_reprogram_all_keys`` can be called by device drivers if the device
-needs each and every of its keyslots to be reprogrammed with the key it
-"should have" at the point in time when the function is called. This is useful
-e.g. if a device loses all its keys on runtime power down/up.
-
-If the driver used ``blk_ksm_init`` instead of ``devm_blk_ksm_init``, then
-``blk_ksm_destroy`` should be called to free up all resources used by a
-``blk_keyslot_manager`` once it is no longer needed.
+A device driver that wants to support inline encryption must set up a
+blk_crypto_profile in the request_queue of its device.  To do this, it first
+must call ``blk_crypto_profile_init()`` (or its resource-managed variant
+``devm_blk_crypto_profile_init()``), providing the number of keyslots.
+
+Next, it must advertise its crypto capabilities by setting fields in the
+blk_crypto_profile, e.g. ``modes_supported`` and ``max_dun_bytes_supported``.
+
+It then must set function pointers in the ``ll_ops`` field of the
+blk_crypto_profile to tell upper layers how to control the inline encryption
+hardware, e.g. how to program and evict keyslots.  Most drivers will need to
+implement ``keyslot_program`` and ``keyslot_evict``.  For details, see the
+comments for ``struct blk_crypto_ll_ops``.
+
+Once the driver registers a blk_crypto_profile with a request_queue, I/O
+requests the driver receives via that queue may have an encryption context.  All
+encryption contexts will be compatible with the crypto capabilities declared in
+the blk_crypto_profile, so drivers don't need to worry about handling
+unsupported requests.  Also, if a nonzero number of keyslots was declared in the
+blk_crypto_profile, then all I/O requests that have an encryption context will
+also have a keyslot which was already programmed with the appropriate key.
+
+If the driver implements runtime suspend and its blk_crypto_ll_ops don't work
+while the device is runtime-suspended, then the driver must also set the ``dev``
+field of the blk_crypto_profile to point to the ``struct device`` that will be
+resumed before any of the low-level operations are called.
+
+If there are situations where the inline encryption hardware loses the contents
+of its keyslots, e.g. device resets, the driver must handle reprogramming the
+keyslots.  To do this, the driver may call ``blk_crypto_reprogram_all_keys()``.
+
+Finally, if the driver used ``blk_crypto_profile_init()`` instead of
+``devm_blk_crypto_profile_init()``, then it is responsible for calling
+``blk_crypto_profile_destroy()`` when the crypto profile is no longer needed.
 
 Layered Devices
 ===============
 
-Request queue based layered devices like dm-rq that wish to support IE need to
-create their own keyslot manager for their request queue, and expose whatever
-functionality they choose. When a layered device wants to pass a clone of that
-request to another ``request_queue``, blk-crypto will initialize and prepare the
-clone as necessary - see ``blk_crypto_insert_cloned_request`` in
-``blk-crypto.c``.
-
-
-Future Optimizations for layered devices
-========================================
-
-Creating a keyslot manager for a layered device uses up memory for each
-keyslot, and in general, a layered device merely passes the request on to a
-"child" device, so the keyslots in the layered device itself are completely
-unused, and don't need any refcounting or keyslot programming. We can instead
-define a new type of KSM; the "passthrough KSM", that layered devices can use
-to advertise an unlimited number of keyslots, and support for any encryption
-algorithms they choose, while not actually using any memory for each keyslot.
-Another use case for the "passthrough KSM" is for IE devices that do not have a
-limited number of keyslots.
-
+Request queue based layered devices like dm-rq that wish to support inline
+encryption need to create their own blk_crypto_profile for their request_queue,
+and expose whatever functionality they choose. When a layered device wants to
+pass a clone of that request to another request_queue, blk-crypto will
+initialize and prepare the clone as necessary.
 
 Interaction between inline encryption and blk integrity
 =======================================================
@@ -257,7 +297,7 @@ Because there isn't any real hardware yet, it seems prudent to assume that
 hardware implementations might not implement both features together correctly,
 and disallow the combination for now. Whenever a device supports integrity, the
 kernel will pretend that the device does not support hardware inline encryption
-(by essentially setting the keyslot manager in the request_queue of the device
-to NULL). When the crypto API fallback is enabled, this means that all bios with
-and encryption context will use the fallback, and IO will complete as usual.
-When the fallback is disabled, a bio with an encryption context will be failed.
+(by setting the blk_crypto_profile in the request_queue of the device to NULL).
+When the crypto API fallback is enabled, this means that all bios with and
+encryption context will use the fallback, and IO will complete as usual.  When
+the fallback is disabled, a bio with an encryption context will be failed.
diff --git a/Documentation/block/null_blk.rst b/Documentation/block/null_blk.rst
index edbbab2f12f8..4dd78f24d10a 100644
--- a/Documentation/block/null_blk.rst
+++ b/Documentation/block/null_blk.rst
@@ -72,6 +72,28 @@ submit_queues=[1..nr_cpus]: Default: 1
 hw_queue_depth=[0..qdepth]: Default: 64
   The hardware queue depth of the device.
 
+memory_backed=[0/1]: Default: 0
+  Whether or not to use a memory buffer to respond to IO requests
+
+  =  =============================================
+  0  Transfer no data in response to IO requests
+  1  Use a memory buffer to respond to IO requests
+  =  =============================================
+
+discard=[0/1]: Default: 0
+  Support discard operations (requires memory-backed null_blk device).
+
+  =  =====================================
+  0  Do not support discard operations
+  1  Enable support for discard operations
+  =  =====================================
+
+cache_size=[Size in MB]: Default: 0
+  Cache size in MB for memory-backed device.
+
+mbps=[Maximum bandwidth in MB/s]: Default: 0 (no limit)
+  Bandwidth limit for device performance.
+
 Multi-queue specific parameters
 -------------------------------
 
diff --git a/Documentation/block/queue-sysfs.rst b/Documentation/block/queue-sysfs.rst
deleted file mode 100644
index 4dc7f0d499a8..000000000000
--- a/Documentation/block/queue-sysfs.rst
+++ /dev/null
@@ -1,289 +0,0 @@
-=================
-Queue sysfs files
-=================
-
-This text file will detail the queue files that are located in the sysfs tree
-for each block device. Note that stacked devices typically do not export
-any settings, since their queue merely functions are a remapping target.
-These files are the ones found in the /sys/block/xxx/queue/ directory.
-
-Files denoted with a RO postfix are readonly and the RW postfix means
-read-write.
-
-add_random (RW)
----------------
-This file allows to turn off the disk entropy contribution. Default
-value of this file is '1'(on).
-
-chunk_sectors (RO)
-------------------
-This has different meaning depending on the type of the block device.
-For a RAID device (dm-raid), chunk_sectors indicates the size in 512B sectors
-of the RAID volume stripe segment. For a zoned block device, either host-aware
-or host-managed, chunk_sectors indicates the size in 512B sectors of the zones
-of the device, with the eventual exception of the last zone of the device which
-may be smaller.
-
-dax (RO)
---------
-This file indicates whether the device supports Direct Access (DAX),
-used by CPU-addressable storage to bypass the pagecache.  It shows '1'
-if true, '0' if not.
-
-discard_granularity (RO)
-------------------------
-This shows the size of internal allocation of the device in bytes, if
-reported by the device. A value of '0' means device does not support
-the discard functionality.
-
-discard_max_hw_bytes (RO)
--------------------------
-Devices that support discard functionality may have internal limits on
-the number of bytes that can be trimmed or unmapped in a single operation.
-The discard_max_bytes parameter is set by the device driver to the maximum
-number of bytes that can be discarded in a single operation. Discard
-requests issued to the device must not exceed this limit. A discard_max_bytes
-value of 0 means that the device does not support discard functionality.
-
-discard_max_bytes (RW)
-----------------------
-While discard_max_hw_bytes is the hardware limit for the device, this
-setting is the software limit. Some devices exhibit large latencies when
-large discards are issued, setting this value lower will make Linux issue
-smaller discards and potentially help reduce latencies induced by large
-discard operations.
-
-discard_zeroes_data (RO)
-------------------------
-Obsolete. Always zero.
-
-fua (RO)
---------
-Whether or not the block driver supports the FUA flag for write requests.
-FUA stands for Force Unit Access. If the FUA flag is set that means that
-write requests must bypass the volatile cache of the storage device.
-
-hw_sector_size (RO)
--------------------
-This is the hardware sector size of the device, in bytes.
-
-io_poll (RW)
-------------
-When read, this file shows whether polling is enabled (1) or disabled
-(0).  Writing '0' to this file will disable polling for this device.
-Writing any non-zero value will enable this feature.
-
-io_poll_delay (RW)
-------------------
-If polling is enabled, this controls what kind of polling will be
-performed. It defaults to -1, which is classic polling. In this mode,
-the CPU will repeatedly ask for completions without giving up any time.
-If set to 0, a hybrid polling mode is used, where the kernel will attempt
-to make an educated guess at when the IO will complete. Based on this
-guess, the kernel will put the process issuing IO to sleep for an amount
-of time, before entering a classic poll loop. This mode might be a
-little slower than pure classic polling, but it will be more efficient.
-If set to a value larger than 0, the kernel will put the process issuing
-IO to sleep for this amount of microseconds before entering classic
-polling.
-
-io_timeout (RW)
----------------
-io_timeout is the request timeout in milliseconds. If a request does not
-complete in this time then the block driver timeout handler is invoked.
-That timeout handler can decide to retry the request, to fail it or to start
-a device recovery strategy.
-
-iostats (RW)
--------------
-This file is used to control (on/off) the iostats accounting of the
-disk.
-
-logical_block_size (RO)
------------------------
-This is the logical block size of the device, in bytes.
-
-max_discard_segments (RO)
--------------------------
-The maximum number of DMA scatter/gather entries in a discard request.
-
-max_hw_sectors_kb (RO)
-----------------------
-This is the maximum number of kilobytes supported in a single data transfer.
-
-max_integrity_segments (RO)
----------------------------
-Maximum number of elements in a DMA scatter/gather list with integrity
-data that will be submitted by the block layer core to the associated
-block driver.
-
-max_active_zones (RO)
----------------------
-For zoned block devices (zoned attribute indicating "host-managed" or
-"host-aware"), the sum of zones belonging to any of the zone states:
-EXPLICIT OPEN, IMPLICIT OPEN or CLOSED, is limited by this value.
-If this value is 0, there is no limit.
-
-If the host attempts to exceed this limit, the driver should report this error
-with BLK_STS_ZONE_ACTIVE_RESOURCE, which user space may see as the EOVERFLOW
-errno.
-
-max_open_zones (RO)
--------------------
-For zoned block devices (zoned attribute indicating "host-managed" or
-"host-aware"), the sum of zones belonging to any of the zone states:
-EXPLICIT OPEN or IMPLICIT OPEN, is limited by this value.
-If this value is 0, there is no limit.
-
-If the host attempts to exceed this limit, the driver should report this error
-with BLK_STS_ZONE_OPEN_RESOURCE, which user space may see as the ETOOMANYREFS
-errno.
-
-max_sectors_kb (RW)
--------------------
-This is the maximum number of kilobytes that the block layer will allow
-for a filesystem request. Must be smaller than or equal to the maximum
-size allowed by the hardware.
-
-max_segments (RO)
------------------
-Maximum number of elements in a DMA scatter/gather list that is submitted
-to the associated block driver.
-
-max_segment_size (RO)
----------------------
-Maximum size in bytes of a single element in a DMA scatter/gather list.
-
-minimum_io_size (RO)
---------------------
-This is the smallest preferred IO size reported by the device.
-
-nomerges (RW)
--------------
-This enables the user to disable the lookup logic involved with IO
-merging requests in the block layer. By default (0) all merges are
-enabled. When set to 1 only simple one-hit merges will be tried. When
-set to 2 no merge algorithms will be tried (including one-hit or more
-complex tree/hash lookups).
-
-nr_requests (RW)
-----------------
-This controls how many requests may be allocated in the block layer for
-read or write requests. Note that the total allocated number may be twice
-this amount, since it applies only to reads or writes (not the accumulated
-sum).
-
-To avoid priority inversion through request starvation, a request
-queue maintains a separate request pool per each cgroup when
-CONFIG_BLK_CGROUP is enabled, and this parameter applies to each such
-per-block-cgroup request pool.  IOW, if there are N block cgroups,
-each request queue may have up to N request pools, each independently
-regulated by nr_requests.
-
-nr_zones (RO)
--------------
-For zoned block devices (zoned attribute indicating "host-managed" or
-"host-aware"), this indicates the total number of zones of the device.
-This is always 0 for regular block devices.
-
-optimal_io_size (RO)
---------------------
-This is the optimal IO size reported by the device.
-
-physical_block_size (RO)
-------------------------
-This is the physical block size of device, in bytes.
-
-read_ahead_kb (RW)
-------------------
-Maximum number of kilobytes to read-ahead for filesystems on this block
-device.
-
-rotational (RW)
----------------
-This file is used to stat if the device is of rotational type or
-non-rotational type.
-
-rq_affinity (RW)
-----------------
-If this option is '1', the block layer will migrate request completions to the
-cpu "group" that originally submitted the request. For some workloads this
-provides a significant reduction in CPU cycles due to caching effects.
-
-For storage configurations that need to maximize distribution of completion
-processing setting this option to '2' forces the completion to run on the
-requesting cpu (bypassing the "group" aggregation logic).
-
-scheduler (RW)
---------------
-When read, this file will display the current and available IO schedulers
-for this block device. The currently active IO scheduler will be enclosed
-in [] brackets. Writing an IO scheduler name to this file will switch
-control of this block device to that new IO scheduler. Note that writing
-an IO scheduler name to this file will attempt to load that IO scheduler
-module, if it isn't already present in the system.
-
-write_cache (RW)
-----------------
-When read, this file will display whether the device has write back
-caching enabled or not. It will return "write back" for the former
-case, and "write through" for the latter. Writing to this file can
-change the kernels view of the device, but it doesn't alter the
-device state. This means that it might not be safe to toggle the
-setting from "write back" to "write through", since that will also
-eliminate cache flushes issued by the kernel.
-
-write_same_max_bytes (RO)
--------------------------
-This is the number of bytes the device can write in a single write-same
-command.  A value of '0' means write-same is not supported by this
-device.
-
-wbt_lat_usec (RW)
------------------
-If the device is registered for writeback throttling, then this file shows
-the target minimum read latency. If this latency is exceeded in a given
-window of time (see wb_window_usec), then the writeback throttling will start
-scaling back writes. Writing a value of '0' to this file disables the
-feature. Writing a value of '-1' to this file resets the value to the
-default setting.
-
-throttle_sample_time (RW)
--------------------------
-This is the time window that blk-throttle samples data, in millisecond.
-blk-throttle makes decision based on the samplings. Lower time means cgroups
-have more smooth throughput, but higher CPU overhead. This exists only when
-CONFIG_BLK_DEV_THROTTLING_LOW is enabled.
-
-write_zeroes_max_bytes (RO)
----------------------------
-For block drivers that support REQ_OP_WRITE_ZEROES, the maximum number of
-bytes that can be zeroed at once. The value 0 means that REQ_OP_WRITE_ZEROES
-is not supported.
-
-zone_append_max_bytes (RO)
---------------------------
-This is the maximum number of bytes that can be written to a sequential
-zone of a zoned block device using a zone append write operation
-(REQ_OP_ZONE_APPEND). This value is always 0 for regular block devices.
-
-zoned (RO)
-----------
-This indicates if the device is a zoned block device and the zone model of the
-device if it is indeed zoned. The possible values indicated by zoned are
-"none" for regular block devices and "host-aware" or "host-managed" for zoned
-block devices. The characteristics of host-aware and host-managed zoned block
-devices are described in the ZBC (Zoned Block Commands) and ZAC
-(Zoned Device ATA Command Set) standards. These standards also define the
-"drive-managed" zone model. However, since drive-managed zoned block devices
-do not support zone commands, they will be treated as regular block devices
-and zoned will report "none".
-
-zone_write_granularity (RO)
----------------------------
-This indicates the alignment constraint, in bytes, for write operations in
-sequential zones of zoned block devices (devices with a zoned attributed
-that reports "host-managed" or "host-aware"). This value is always 0 for
-regular block devices.
-
-Jens Axboe <jens.axboe@oracle.com>, February 2009
diff --git a/Documentation/block/request.rst b/Documentation/block/request.rst
deleted file mode 100644
index 747021e1ffdb..000000000000
--- a/Documentation/block/request.rst
+++ /dev/null
@@ -1,99 +0,0 @@
-============================
-struct request documentation
-============================
-
-Jens Axboe <jens.axboe@oracle.com> 27/05/02
-
-
-.. FIXME:
-   No idea about what does mean - seems just some noise, so comment it
-
-   1.0
-   Index
-
-   2.0 Struct request members classification
-
-       2.1 struct request members explanation
-
-   3.0
-
-
-   2.0
-
-
-
-Short explanation of request members
-====================================
-
-Classification flags:
-
-	=	====================
-	D	driver member
-	B	block layer member
-	I	I/O scheduler member
-	=	====================
-
-Unless an entry contains a D classification, a device driver must not access
-this member. Some members may contain D classifications, but should only be
-access through certain macros or functions (eg ->flags).
-
-<linux/blkdev.h>
-
-=============================== ======= =======================================
-Member				Flag	Comment
-=============================== ======= =======================================
-struct list_head queuelist	BI	Organization on various internal
-					queues
-
-``void *elevator_private``	I	I/O scheduler private data
-
-unsigned char cmd[16]		D	Driver can use this for setting up
-					a cdb before execution, see
-					blk_queue_prep_rq
-
-unsigned long flags		DBI	Contains info about data direction,
-					request type, etc.
-
-int rq_status			D	Request status bits
-
-kdev_t rq_dev			DBI	Target device
-
-int errors			DB	Error counts
-
-sector_t sector			DBI	Target location
-
-unsigned long hard_nr_sectors	B	Used to keep sector sane
-
-unsigned long nr_sectors	DBI	Total number of sectors in request
-
-unsigned long hard_nr_sectors	B	Used to keep nr_sectors sane
-
-unsigned short nr_phys_segments	DB	Number of physical scatter gather
-					segments in a request
-
-unsigned short nr_hw_segments	DB	Number of hardware scatter gather
-					segments in a request
-
-unsigned int current_nr_sectors	DB	Number of sectors in first segment
-					of request
-
-unsigned int hard_cur_sectors	B	Used to keep current_nr_sectors sane
-
-int tag				DB	TCQ tag, if assigned
-
-``void *special``		D	Free to be used by driver
-
-``char *buffer``		D	Map of first segment, also see
-					section on bouncing SECTION
-
-``struct completion *waiting``	D	Can be used by driver to get signalled
-					on request completion
-
-``struct bio *bio``		DBI	First bio in request
-
-``struct bio *biotail``		DBI	Last bio in request
-
-``struct request_queue *q``	DB	Request queue this request belongs to
-
-``struct request_list *rl``	B	Request list this request came from
-=============================== ======= =======================================
diff --git a/Documentation/block/ublk.rst b/Documentation/block/ublk.rst
new file mode 100644
index 000000000000..1713b2890abb
--- /dev/null
+++ b/Documentation/block/ublk.rst
@@ -0,0 +1,326 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===========================================
+Userspace block device driver (ublk driver)
+===========================================
+
+Overview
+========
+
+ublk is a generic framework for implementing block device logic from userspace.
+The motivation behind it is that moving virtual block drivers into userspace,
+such as loop, nbd and similar can be very helpful. It can help to implement
+new virtual block device such as ublk-qcow2 (there are several attempts of
+implementing qcow2 driver in kernel).
+
+Userspace block devices are attractive because:
+
+- They can be written many programming languages.
+- They can use libraries that are not available in the kernel.
+- They can be debugged with tools familiar to application developers.
+- Crashes do not kernel panic the machine.
+- Bugs are likely to have a lower security impact than bugs in kernel
+  code.
+- They can be installed and updated independently of the kernel.
+- They can be used to simulate block device easily with user specified
+  parameters/setting for test/debug purpose
+
+ublk block device (``/dev/ublkb*``) is added by ublk driver. Any IO request
+on the device will be forwarded to ublk userspace program. For convenience,
+in this document, ``ublk server`` refers to generic ublk userspace
+program. ``ublksrv`` [#userspace]_ is one of such implementation. It
+provides ``libublksrv`` [#userspace_lib]_ library for developing specific
+user block device conveniently, while also generic type block device is
+included, such as loop and null. Richard W.M. Jones wrote userspace nbd device
+``nbdublk`` [#userspace_nbdublk]_  based on ``libublksrv`` [#userspace_lib]_.
+
+After the IO is handled by userspace, the result is committed back to the
+driver, thus completing the request cycle. This way, any specific IO handling
+logic is totally done by userspace, such as loop's IO handling, NBD's IO
+communication, or qcow2's IO mapping.
+
+``/dev/ublkb*`` is driven by blk-mq request-based driver. Each request is
+assigned by one queue wide unique tag. ublk server assigns unique tag to each
+IO too, which is 1:1 mapped with IO of ``/dev/ublkb*``.
+
+Both the IO request forward and IO handling result committing are done via
+``io_uring`` passthrough command; that is why ublk is also one io_uring based
+block driver. It has been observed that using io_uring passthrough command can
+give better IOPS than block IO; which is why ublk is one of high performance
+implementation of userspace block device: not only IO request communication is
+done by io_uring, but also the preferred IO handling in ublk server is io_uring
+based approach too.
+
+ublk provides control interface to set/get ublk block device parameters.
+The interface is extendable and kabi compatible: basically any ublk request
+queue's parameter or ublk generic feature parameters can be set/get via the
+interface. Thus, ublk is generic userspace block device framework.
+For example, it is easy to setup a ublk device with specified block
+parameters from userspace.
+
+Using ublk
+==========
+
+ublk requires userspace ublk server to handle real block device logic.
+
+Below is example of using ``ublksrv`` to provide ublk-based loop device.
+
+- add a device::
+
+     ublk add -t loop -f ublk-loop.img
+
+- format with xfs, then use it::
+
+     mkfs.xfs /dev/ublkb0
+     mount /dev/ublkb0 /mnt
+     # do anything. all IOs are handled by io_uring
+     ...
+     umount /mnt
+
+- list the devices with their info::
+
+     ublk list
+
+- delete the device::
+
+     ublk del -a
+     ublk del -n $ublk_dev_id
+
+See usage details in README of ``ublksrv`` [#userspace_readme]_.
+
+Design
+======
+
+Control plane
+-------------
+
+ublk driver provides global misc device node (``/dev/ublk-control``) for
+managing and controlling ublk devices with help of several control commands:
+
+- ``UBLK_CMD_ADD_DEV``
+
+  Add a ublk char device (``/dev/ublkc*``) which is talked with ublk server
+  WRT IO command communication. Basic device info is sent together with this
+  command. It sets UAPI structure of ``ublksrv_ctrl_dev_info``,
+  such as ``nr_hw_queues``, ``queue_depth``, and max IO request buffer size,
+  for which the info is negotiated with the driver and sent back to the server.
+  When this command is completed, the basic device info is immutable.
+
+- ``UBLK_CMD_SET_PARAMS`` / ``UBLK_CMD_GET_PARAMS``
+
+  Set or get parameters of the device, which can be either generic feature
+  related, or request queue limit related, but can't be IO logic specific,
+  because the driver does not handle any IO logic. This command has to be
+  sent before sending ``UBLK_CMD_START_DEV``.
+
+- ``UBLK_CMD_START_DEV``
+
+  After the server prepares userspace resources (such as creating per-queue
+  pthread & io_uring for handling ublk IO), this command is sent to the
+  driver for allocating & exposing ``/dev/ublkb*``. Parameters set via
+  ``UBLK_CMD_SET_PARAMS`` are applied for creating the device.
+
+- ``UBLK_CMD_STOP_DEV``
+
+  Halt IO on ``/dev/ublkb*`` and remove the device. When this command returns,
+  ublk server will release resources (such as destroying per-queue pthread &
+  io_uring).
+
+- ``UBLK_CMD_DEL_DEV``
+
+  Remove ``/dev/ublkc*``. When this command returns, the allocated ublk device
+  number can be reused.
+
+- ``UBLK_CMD_GET_QUEUE_AFFINITY``
+
+  When ``/dev/ublkc`` is added, the driver creates block layer tagset, so
+  that each queue's affinity info is available. The server sends
+  ``UBLK_CMD_GET_QUEUE_AFFINITY`` to retrieve queue affinity info. It can
+  set up the per-queue context efficiently, such as bind affine CPUs with IO
+  pthread and try to allocate buffers in IO thread context.
+
+- ``UBLK_CMD_GET_DEV_INFO``
+
+  For retrieving device info via ``ublksrv_ctrl_dev_info``. It is the server's
+  responsibility to save IO target specific info in userspace.
+
+- ``UBLK_CMD_GET_DEV_INFO2``
+  Same purpose with ``UBLK_CMD_GET_DEV_INFO``, but ublk server has to
+  provide path of the char device of ``/dev/ublkc*`` for kernel to run
+  permission check, and this command is added for supporting unprivileged
+  ublk device, and introduced with ``UBLK_F_UNPRIVILEGED_DEV`` together.
+  Only the user owning the requested device can retrieve the device info.
+
+  How to deal with userspace/kernel compatibility:
+
+  1) if kernel is capable of handling ``UBLK_F_UNPRIVILEGED_DEV``
+
+    If ublk server supports ``UBLK_F_UNPRIVILEGED_DEV``:
+
+    ublk server should send ``UBLK_CMD_GET_DEV_INFO2``, given anytime
+    unprivileged application needs to query devices the current user owns,
+    when the application has no idea if ``UBLK_F_UNPRIVILEGED_DEV`` is set
+    given the capability info is stateless, and application should always
+    retrieve it via ``UBLK_CMD_GET_DEV_INFO2``
+
+    If ublk server doesn't support ``UBLK_F_UNPRIVILEGED_DEV``:
+
+    ``UBLK_CMD_GET_DEV_INFO`` is always sent to kernel, and the feature of
+    UBLK_F_UNPRIVILEGED_DEV isn't available for user
+
+  2) if kernel isn't capable of handling ``UBLK_F_UNPRIVILEGED_DEV``
+
+    If ublk server supports ``UBLK_F_UNPRIVILEGED_DEV``:
+
+    ``UBLK_CMD_GET_DEV_INFO2`` is tried first, and will be failed, then
+    ``UBLK_CMD_GET_DEV_INFO`` needs to be retried given
+    ``UBLK_F_UNPRIVILEGED_DEV`` can't be set
+
+    If ublk server doesn't support ``UBLK_F_UNPRIVILEGED_DEV``:
+
+    ``UBLK_CMD_GET_DEV_INFO`` is always sent to kernel, and the feature of
+    ``UBLK_F_UNPRIVILEGED_DEV`` isn't available for user
+
+- ``UBLK_CMD_START_USER_RECOVERY``
+
+  This command is valid if ``UBLK_F_USER_RECOVERY`` feature is enabled. This
+  command is accepted after the old process has exited, ublk device is quiesced
+  and ``/dev/ublkc*`` is released. User should send this command before he starts
+  a new process which re-opens ``/dev/ublkc*``. When this command returns, the
+  ublk device is ready for the new process.
+
+- ``UBLK_CMD_END_USER_RECOVERY``
+
+  This command is valid if ``UBLK_F_USER_RECOVERY`` feature is enabled. This
+  command is accepted after ublk device is quiesced and a new process has
+  opened ``/dev/ublkc*`` and get all ublk queues be ready. When this command
+  returns, ublk device is unquiesced and new I/O requests are passed to the
+  new process.
+
+- user recovery feature description
+
+  Two new features are added for user recovery: ``UBLK_F_USER_RECOVERY`` and
+  ``UBLK_F_USER_RECOVERY_REISSUE``.
+
+  With ``UBLK_F_USER_RECOVERY`` set, after one ubq_daemon(ublk server's io
+  handler) is dying, ublk does not delete ``/dev/ublkb*`` during the whole
+  recovery stage and ublk device ID is kept. It is ublk server's
+  responsibility to recover the device context by its own knowledge.
+  Requests which have not been issued to userspace are requeued. Requests
+  which have been issued to userspace are aborted.
+
+  With ``UBLK_F_USER_RECOVERY_REISSUE`` set, after one ubq_daemon(ublk
+  server's io handler) is dying, contrary to ``UBLK_F_USER_RECOVERY``,
+  requests which have been issued to userspace are requeued and will be
+  re-issued to the new process after handling ``UBLK_CMD_END_USER_RECOVERY``.
+  ``UBLK_F_USER_RECOVERY_REISSUE`` is designed for backends who tolerate
+  double-write since the driver may issue the same I/O request twice. It
+  might be useful to a read-only FS or a VM backend.
+
+Unprivileged ublk device is supported by passing ``UBLK_F_UNPRIVILEGED_DEV``.
+Once the flag is set, all control commands can be sent by unprivileged
+user. Except for command of ``UBLK_CMD_ADD_DEV``, permission check on
+the specified char device(``/dev/ublkc*``) is done for all other control
+commands by ublk driver, for doing that, path of the char device has to
+be provided in these commands' payload from ublk server. With this way,
+ublk device becomes container-ware, and device created in one container
+can be controlled/accessed just inside this container.
+
+Data plane
+----------
+
+ublk server needs to create per-queue IO pthread & io_uring for handling IO
+commands via io_uring passthrough. The per-queue IO pthread
+focuses on IO handling and shouldn't handle any control & management
+tasks.
+
+The's IO is assigned by a unique tag, which is 1:1 mapping with IO
+request of ``/dev/ublkb*``.
+
+UAPI structure of ``ublksrv_io_desc`` is defined for describing each IO from
+the driver. A fixed mmaped area (array) on ``/dev/ublkc*`` is provided for
+exporting IO info to the server; such as IO offset, length, OP/flags and
+buffer address. Each ``ublksrv_io_desc`` instance can be indexed via queue id
+and IO tag directly.
+
+The following IO commands are communicated via io_uring passthrough command,
+and each command is only for forwarding the IO and committing the result
+with specified IO tag in the command data:
+
+- ``UBLK_IO_FETCH_REQ``
+
+  Sent from the server IO pthread for fetching future incoming IO requests
+  destined to ``/dev/ublkb*``. This command is sent only once from the server
+  IO pthread for ublk driver to setup IO forward environment.
+
+- ``UBLK_IO_COMMIT_AND_FETCH_REQ``
+
+  When an IO request is destined to ``/dev/ublkb*``, the driver stores
+  the IO's ``ublksrv_io_desc`` to the specified mapped area; then the
+  previous received IO command of this IO tag (either ``UBLK_IO_FETCH_REQ``
+  or ``UBLK_IO_COMMIT_AND_FETCH_REQ)`` is completed, so the server gets
+  the IO notification via io_uring.
+
+  After the server handles the IO, its result is committed back to the
+  driver by sending ``UBLK_IO_COMMIT_AND_FETCH_REQ`` back. Once ublkdrv
+  received this command, it parses the result and complete the request to
+  ``/dev/ublkb*``. In the meantime setup environment for fetching future
+  requests with the same IO tag. That is, ``UBLK_IO_COMMIT_AND_FETCH_REQ``
+  is reused for both fetching request and committing back IO result.
+
+- ``UBLK_IO_NEED_GET_DATA``
+
+  With ``UBLK_F_NEED_GET_DATA`` enabled, the WRITE request will be firstly
+  issued to ublk server without data copy. Then, IO backend of ublk server
+  receives the request and it can allocate data buffer and embed its addr
+  inside this new io command. After the kernel driver gets the command,
+  data copy is done from request pages to this backend's buffer. Finally,
+  backend receives the request again with data to be written and it can
+  truly handle the request.
+
+  ``UBLK_IO_NEED_GET_DATA`` adds one additional round-trip and one
+  io_uring_enter() syscall. Any user thinks that it may lower performance
+  should not enable UBLK_F_NEED_GET_DATA. ublk server pre-allocates IO
+  buffer for each IO by default. Any new project should try to use this
+  buffer to communicate with ublk driver. However, existing project may
+  break or not able to consume the new buffer interface; that's why this
+  command is added for backwards compatibility so that existing projects
+  can still consume existing buffers.
+
+- data copy between ublk server IO buffer and ublk block IO request
+
+  The driver needs to copy the block IO request pages into the server buffer
+  (pages) first for WRITE before notifying the server of the coming IO, so
+  that the server can handle WRITE request.
+
+  When the server handles READ request and sends
+  ``UBLK_IO_COMMIT_AND_FETCH_REQ`` to the server, ublkdrv needs to copy
+  the server buffer (pages) read to the IO request pages.
+
+Future development
+==================
+
+Zero copy
+---------
+
+Zero copy is a generic requirement for nbd, fuse or similar drivers. A
+problem [#xiaoguang]_ Xiaoguang mentioned is that pages mapped to userspace
+can't be remapped any more in kernel with existing mm interfaces. This can
+occurs when destining direct IO to ``/dev/ublkb*``. Also, he reported that
+big requests (IO size >= 256 KB) may benefit a lot from zero copy.
+
+
+References
+==========
+
+.. [#userspace] https://github.com/ming1/ubdsrv
+
+.. [#userspace_lib] https://github.com/ming1/ubdsrv/tree/master/lib
+
+.. [#userspace_nbdublk] https://gitlab.com/rwmjones/libnbd/-/tree/nbdublk
+
+.. [#userspace_readme] https://github.com/ming1/ubdsrv/blob/master/README
+
+.. [#stefan] https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/
+
+.. [#xiaoguang] https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/
diff --git a/Documentation/bpf/bpf_design_QA.rst b/Documentation/bpf/bpf_design_QA.rst
index 437de2a7a5de..38372a956d65 100644
--- a/Documentation/bpf/bpf_design_QA.rst
+++ b/Documentation/bpf/bpf_design_QA.rst
@@ -208,12 +208,22 @@ data structures and compile with kernel internal headers. Both of these
 kernel internals are subject to change and can break with newer kernels
 such that the program needs to be adapted accordingly.
 
+New BPF functionality is generally added through the use of kfuncs instead of
+new helpers. Kfuncs are not considered part of the stable API, and have their own
+lifecycle expectations as described in :ref:`BPF_kfunc_lifecycle_expectations`.
+
 Q: Are tracepoints part of the stable ABI?
 ------------------------------------------
 A: NO. Tracepoints are tied to internal implementation details hence they are
 subject to change and can break with newer kernels. BPF programs need to change
 accordingly when this happens.
 
+Q: Are places where kprobes can attach part of the stable ABI?
+--------------------------------------------------------------
+A: NO. The places to which kprobes can attach are internal implementation
+details, which means that they are subject to change and can break with
+newer kernels. BPF programs need to change accordingly when this happens.
+
 Q: How much stack space a BPF program uses?
 -------------------------------------------
 A: Currently all program types are limited to 512 bytes of stack
@@ -230,8 +240,8 @@ A: NO. Classic BPF programs are converted into extend BPF instructions.
 
 Q: Can BPF call arbitrary kernel functions?
 -------------------------------------------
-A: NO. BPF programs can only call a set of helper functions which
-is defined for every program type.
+A: NO. BPF programs can only call specific functions exposed as BPF helpers or
+kfuncs. The set of available functions is defined for every program type.
 
 Q: Can BPF overwrite arbitrary kernel memory?
 ---------------------------------------------
@@ -257,7 +267,12 @@ Q: New functionality via kernel modules?
 Q: Can BPF functionality such as new program or map types, new
 helpers, etc be added out of kernel module code?
 
-A: NO.
+A: Yes, through kfuncs and kptrs
+
+The core BPF functionality such as program types, maps and helpers cannot be
+added to by modules. However, modules can expose functionality to BPF programs
+by exporting kfuncs (which may return pointers to module-internal data
+structures as kptrs).
 
 Q: Directly calling kernel function is an ABI?
 ----------------------------------------------
@@ -272,4 +287,70 @@ kernel functions have already been used by other kernel tcp
 cc (congestion-control) implementations.  If any of these kernel
 functions has changed, both the in-tree and out-of-tree kernel tcp cc
 implementations have to be changed.  The same goes for the bpf
-programs and they have to be adjusted accordingly.
+programs and they have to be adjusted accordingly. See
+:ref:`BPF_kfunc_lifecycle_expectations` for details.
+
+Q: Attaching to arbitrary kernel functions is an ABI?
+-----------------------------------------------------
+Q: BPF programs can be attached to many kernel functions.  Do these
+kernel functions become part of the ABI?
+
+A: NO.
+
+The kernel function prototypes will change, and BPF programs attaching to
+them will need to change.  The BPF compile-once-run-everywhere (CO-RE)
+should be used in order to make it easier to adapt your BPF programs to
+different versions of the kernel.
+
+Q: Marking a function with BTF_ID makes that function an ABI?
+-------------------------------------------------------------
+A: NO.
+
+The BTF_ID macro does not cause a function to become part of the ABI
+any more than does the EXPORT_SYMBOL_GPL macro.
+
+Q: What is the compatibility story for special BPF types in map values?
+-----------------------------------------------------------------------
+Q: Users are allowed to embed bpf_spin_lock, bpf_timer fields in their BPF map
+values (when using BTF support for BPF maps). This allows to use helpers for
+such objects on these fields inside map values. Users are also allowed to embed
+pointers to some kernel types (with __kptr_untrusted and __kptr BTF tags). Will the
+kernel preserve backwards compatibility for these features?
+
+A: It depends. For bpf_spin_lock, bpf_timer: YES, for kptr and everything else:
+NO, but see below.
+
+For struct types that have been added already, like bpf_spin_lock and bpf_timer,
+the kernel will preserve backwards compatibility, as they are part of UAPI.
+
+For kptrs, they are also part of UAPI, but only with respect to the kptr
+mechanism. The types that you can use with a __kptr_untrusted and __kptr tagged
+pointer in your struct are NOT part of the UAPI contract. The supported types can
+and will change across kernel releases. However, operations like accessing kptr
+fields and bpf_kptr_xchg() helper will continue to be supported across kernel
+releases for the supported types.
+
+For any other supported struct type, unless explicitly stated in this document
+and added to bpf.h UAPI header, such types can and will arbitrarily change their
+size, type, and alignment, or any other user visible API or ABI detail across
+kernel releases. The users must adapt their BPF programs to the new changes and
+update them to make sure their programs continue to work correctly.
+
+NOTE: BPF subsystem specially reserves the 'bpf\_' prefix for type names, in
+order to introduce more special fields in the future. Hence, user programs must
+avoid defining types with 'bpf\_' prefix to not be broken in future releases.
+In other words, no backwards compatibility is guaranteed if one using a type
+in BTF with 'bpf\_' prefix.
+
+Q: What is the compatibility story for special BPF types in allocated objects?
+------------------------------------------------------------------------------
+Q: Same as above, but for allocated objects (i.e. objects allocated using
+bpf_obj_new for user defined types). Will the kernel preserve backwards
+compatibility for these features?
+
+A: NO.
+
+Unlike map value types, the API to work with allocated objects and any support
+for special fields inside them is exposed through kfuncs, and thus has the same
+lifecycle expectations as the kfuncs themselves. See
+:ref:`BPF_kfunc_lifecycle_expectations` for details.
diff --git a/Documentation/bpf/bpf_devel_QA.rst b/Documentation/bpf/bpf_devel_QA.rst
index 253496af8fef..609b71f5747d 100644
--- a/Documentation/bpf/bpf_devel_QA.rst
+++ b/Documentation/bpf/bpf_devel_QA.rst
@@ -7,8 +7,8 @@ workflows related to reporting bugs, submitting patches, and queueing
 patches for stable kernels.
 
 For general information about submitting patches, please refer to
-`Documentation/process/`_. This document only describes additional specifics
-related to BPF.
+Documentation/process/submitting-patches.rst. This document only describes
+additional specifics related to BPF.
 
 .. contents::
     :local:
@@ -44,6 +44,33 @@ is a guarantee that the reported issue will be overlooked.**
 Submitting patches
 ==================
 
+Q: How do I run BPF CI on my changes before sending them out for review?
+------------------------------------------------------------------------
+A: BPF CI is GitHub based and hosted at https://github.com/kernel-patches/bpf.
+While GitHub also provides a CLI that can be used to accomplish the same
+results, here we focus on the UI based workflow.
+
+The following steps lay out how to start a CI run for your patches:
+
+- Create a fork of the aforementioned repository in your own account (one time
+  action)
+
+- Clone the fork locally, check out a new branch tracking either the bpf-next
+  or bpf branch, and apply your to-be-tested patches on top of it
+
+- Push the local branch to your fork and create a pull request against
+  kernel-patches/bpf's bpf-next_base or bpf_base branch, respectively
+
+Shortly after the pull request has been created, the CI workflow will run. Note
+that capacity is shared with patches submitted upstream being checked and so
+depending on utilization the run can take a while to finish.
+
+Note furthermore that both base branches (bpf-next_base and bpf_base) will be
+updated as patches are pushed to the respective upstream branches they track. As
+such, your patch set will automatically (be attempted to) be rebased as well.
+This behavior can result in a CI run being aborted and restarted with the new
+base line.
+
 Q: To which mailing list do I need to submit my BPF patches?
 ------------------------------------------------------------
 A: Please submit your BPF patches to the bpf kernel mailing list:
@@ -101,7 +128,8 @@ into the bpf-next tree will make their way into net-next tree. net and
 net-next are both run by David S. Miller. From there, they will go
 into the kernel mainline tree run by Linus Torvalds. To read up on the
 process of net and net-next being merged into the mainline tree, see
-the :ref:`netdev-FAQ`
+the documentation on netdev subsystem at
+Documentation/process/maintainer-netdev.rst.
 
 
 
@@ -120,7 +148,8 @@ request)::
 Q: How do I indicate which tree (bpf vs. bpf-next) my patch should be applied to?
 ---------------------------------------------------------------------------------
 
-A: The process is the very same as described in the :ref:`netdev-FAQ`,
+A: The process is the very same as described in the netdev subsystem
+documentation at Documentation/process/maintainer-netdev.rst,
 so please read up on it. The subject line must indicate whether the
 patch is a fix or rather "next-like" content in order to let the
 maintainers know whether it is targeted at bpf or bpf-next.
@@ -179,8 +208,9 @@ ii) run extensive BPF test suite and
 Once the BPF pull request was accepted by David S. Miller, then
 the patches end up in net or net-next tree, respectively, and
 make their way from there further into mainline. Again, see the
-:ref:`netdev-FAQ` for additional information e.g. on how often they are
-merged to mainline.
+documentation for netdev subsystem at
+Documentation/process/maintainer-netdev.rst for additional information
+e.g. on how often they are merged to mainline.
 
 Q: How long do I need to wait for feedback on my BPF patches?
 -------------------------------------------------------------
@@ -203,7 +233,8 @@ Q: Are patches applied to bpf-next when the merge window is open?
 -----------------------------------------------------------------
 A: For the time when the merge window is open, bpf-next will not be
 processed. This is roughly analogous to net-next patch processing,
-so feel free to read up on the :ref:`netdev-FAQ` about further details.
+so feel free to read up on the netdev docs at
+Documentation/process/maintainer-netdev.rst about further details.
 
 During those two weeks of merge window, we might ask you to resend
 your patch series once bpf-next is open again. Once Linus released
@@ -367,7 +398,8 @@ netdev kernel mailing list in Cc and ask for the fix to be queued up:
   netdev@vger.kernel.org
 
 The process in general is the same as on netdev itself, see also the
-:ref:`netdev-FAQ`.
+the documentation on networking subsystem at
+Documentation/process/maintainer-netdev.rst.
 
 Q: Do you also backport to kernels not currently maintained as stable?
 ----------------------------------------------------------------------
@@ -383,7 +415,7 @@ Q: The BPF patch I am about to submit needs to go to stable as well
 What should I do?
 
 A: The same rules apply as with netdev patch submissions in general, see
-the :ref:`netdev-FAQ`.
+the netdev docs at Documentation/process/maintainer-netdev.rst.
 
 Never add "``Cc: stable@vger.kernel.org``" to the patch description, but
 ask the BPF maintainers to queue the patches instead. This can be done
@@ -434,15 +466,15 @@ needed::
 
   $ sudo make run_tests
 
-See the kernels selftest `Documentation/dev-tools/kselftest.rst`_
-document for further documentation.
+See :doc:`kernel selftest documentation </dev-tools/kselftest>`
+for details.
 
 To maximize the number of tests passing, the .config of the kernel
 under test should match the config file fragment in
 tools/testing/selftests/bpf as closely as possible.
 
 Finally to ensure support for latest BPF Type Format features -
-discussed in `Documentation/bpf/btf.rst`_ - pahole version 1.16
+discussed in Documentation/bpf/btf.rst - pahole version 1.16
 is required for kernels built with CONFIG_DEBUG_INFO_BTF=y.
 pahole is delivered in the dwarves package or can be built
 from source at
@@ -657,12 +689,7 @@ when:
 
 
 .. Links
-.. _Documentation/process/: https://www.kernel.org/doc/html/latest/process/
-.. _netdev-FAQ: ../networking/netdev-FAQ.rst
 .. _selftests:
    https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/
-.. _Documentation/dev-tools/kselftest.rst:
-   https://www.kernel.org/doc/html/latest/dev-tools/kselftest.html
-.. _Documentation/bpf/btf.rst: btf.rst
 
 Happy BPF hacking!
diff --git a/Documentation/bpf/bpf_iterators.rst b/Documentation/bpf/bpf_iterators.rst
new file mode 100644
index 000000000000..6d7770793fab
--- /dev/null
+++ b/Documentation/bpf/bpf_iterators.rst
@@ -0,0 +1,485 @@
+=============
+BPF Iterators
+=============
+
+
+----------
+Motivation
+----------
+
+There are a few existing ways to dump kernel data into user space. The most
+popular one is the ``/proc`` system. For example, ``cat /proc/net/tcp6`` dumps
+all tcp6 sockets in the system, and ``cat /proc/net/netlink`` dumps all netlink
+sockets in the system. However, their output format tends to be fixed, and if
+users want more information about these sockets, they have to patch the kernel,
+which often takes time to publish upstream and release. The same is true for popular
+tools like `ss <https://man7.org/linux/man-pages/man8/ss.8.html>`_ where any
+additional information needs a kernel patch.
+
+To solve this problem, the `drgn
+<https://www.kernel.org/doc/html/latest/bpf/drgn.html>`_ tool is often used to
+dig out the kernel data with no kernel change. However, the main drawback for
+drgn is performance, as it cannot do pointer tracing inside the kernel. In
+addition, drgn cannot validate a pointer value and may read invalid data if the
+pointer becomes invalid inside the kernel.
+
+The BPF iterator solves the above problem by providing flexibility on what data
+(e.g., tasks, bpf_maps, etc.) to collect by calling BPF programs for each kernel
+data object.
+
+----------------------
+How BPF Iterators Work
+----------------------
+
+A BPF iterator is a type of BPF program that allows users to iterate over
+specific types of kernel objects. Unlike traditional BPF tracing programs that
+allow users to define callbacks that are invoked at particular points of
+execution in the kernel, BPF iterators allow users to define callbacks that
+should be executed for every entry in a variety of kernel data structures.
+
+For example, users can define a BPF iterator that iterates over every task on
+the system and dumps the total amount of CPU runtime currently used by each of
+them. Another BPF task iterator may instead dump the cgroup information for each
+task. Such flexibility is the core value of BPF iterators.
+
+A BPF program is always loaded into the kernel at the behest of a user space
+process. A user space process loads a BPF program by opening and initializing
+the program skeleton as required and then invoking a syscall to have the BPF
+program verified and loaded by the kernel.
+
+In traditional tracing programs, a program is activated by having user space
+obtain a ``bpf_link`` to the program with ``bpf_program__attach()``. Once
+activated, the program callback will be invoked whenever the tracepoint is
+triggered in the main kernel. For BPF iterator programs, a ``bpf_link`` to the
+program is obtained using ``bpf_link_create()``, and the program callback is
+invoked by issuing system calls from user space.
+
+Next, let us see how you can use the iterators to iterate on kernel objects and
+read data.
+
+------------------------
+How to Use BPF iterators
+------------------------
+
+BPF selftests are a great resource to illustrate how to use the iterators. In
+this section, we’ll walk through a BPF selftest which shows how to load and use
+a BPF iterator program.   To begin, we’ll look at `bpf_iter.c
+<https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/tree/tools/testing/selftests/bpf/prog_tests/bpf_iter.c>`_,
+which illustrates how to load and trigger BPF iterators on the user space side.
+Later, we’ll look at a BPF program that runs in kernel space.
+
+Loading a BPF iterator in the kernel from user space typically involves the
+following steps:
+
+* The BPF program is loaded into the kernel through ``libbpf``. Once the kernel
+  has verified and loaded the program, it returns a file descriptor (fd) to user
+  space.
+* Obtain a ``link_fd`` to the BPF program by calling the ``bpf_link_create()``
+  specified with the BPF program file descriptor received from the kernel.
+* Next, obtain a BPF iterator file descriptor (``bpf_iter_fd``) by calling the
+  ``bpf_iter_create()`` specified with the ``bpf_link`` received from Step 2.
+* Trigger the iteration by calling ``read(bpf_iter_fd)`` until no data is
+  available.
+* Close the iterator fd using ``close(bpf_iter_fd)``.
+* If needed to reread the data, get a new ``bpf_iter_fd`` and do the read again.
+
+The following are a few examples of selftest BPF iterator programs:
+
+* `bpf_iter_tcp4.c <https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/tree/tools/testing/selftests/bpf/progs/bpf_iter_tcp4.c>`_
+* `bpf_iter_task_vma.c <https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/tree/tools/testing/selftests/bpf/progs/bpf_iter_task_vma.c>`_
+* `bpf_iter_task_file.c <https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/tree/tools/testing/selftests/bpf/progs/bpf_iter_task_file.c>`_
+
+Let us look at ``bpf_iter_task_file.c``, which runs in kernel space:
+
+Here is the definition of ``bpf_iter__task_file`` in `vmlinux.h
+<https://facebookmicrosites.github.io/bpf/blog/2020/02/19/bpf-portability-and-co-re.html#btf>`_.
+Any struct name in ``vmlinux.h`` in the format ``bpf_iter__<iter_name>``
+represents a BPF iterator. The suffix ``<iter_name>`` represents the type of
+iterator.
+
+::
+
+    struct bpf_iter__task_file {
+            union {
+                struct bpf_iter_meta *meta;
+            };
+            union {
+                struct task_struct *task;
+            };
+            u32 fd;
+            union {
+                struct file *file;
+            };
+    };
+
+In the above code, the field 'meta' contains the metadata, which is the same for
+all BPF iterator programs. The rest of the fields are specific to different
+iterators. For example, for task_file iterators, the kernel layer provides the
+'task', 'fd' and 'file' field values. The 'task' and 'file' are `reference
+counted
+<https://facebookmicrosites.github.io/bpf/blog/2018/08/31/object-lifetime.html#file-descriptors-and-reference-counters>`_,
+so they won't go away when the BPF program runs.
+
+Here is a snippet from the  ``bpf_iter_task_file.c`` file:
+
+::
+
+  SEC("iter/task_file")
+  int dump_task_file(struct bpf_iter__task_file *ctx)
+  {
+    struct seq_file *seq = ctx->meta->seq;
+    struct task_struct *task = ctx->task;
+    struct file *file = ctx->file;
+    __u32 fd = ctx->fd;
+
+    if (task == NULL || file == NULL)
+      return 0;
+
+    if (ctx->meta->seq_num == 0) {
+      count = 0;
+      BPF_SEQ_PRINTF(seq, "    tgid      gid       fd      file\n");
+    }
+
+    if (tgid == task->tgid && task->tgid != task->pid)
+      count++;
+
+    if (last_tgid != task->tgid) {
+      last_tgid = task->tgid;
+      unique_tgid_count++;
+    }
+
+    BPF_SEQ_PRINTF(seq, "%8d %8d %8d %lx\n", task->tgid, task->pid, fd,
+            (long)file->f_op);
+    return 0;
+  }
+
+In the above example, the section name ``SEC(iter/task_file)``, indicates that
+the program is a BPF iterator program to iterate all files from all tasks. The
+context of the program is ``bpf_iter__task_file`` struct.
+
+The user space program invokes the BPF iterator program running in the kernel
+by issuing a ``read()`` syscall. Once invoked, the BPF
+program can export data to user space using a variety of BPF helper functions.
+You can use either ``bpf_seq_printf()`` (and BPF_SEQ_PRINTF helper macro) or
+``bpf_seq_write()`` function based on whether you need formatted output or just
+binary data, respectively. For binary-encoded data, the user space applications
+can process the data from ``bpf_seq_write()`` as needed. For the formatted data,
+you can use ``cat <path>`` to print the results similar to ``cat
+/proc/net/netlink`` after pinning the BPF iterator to the bpffs mount. Later,
+use  ``rm -f <path>`` to remove the pinned iterator.
+
+For example, you can use the following command to create a BPF iterator from the
+``bpf_iter_ipv6_route.o`` object file and pin it to the ``/sys/fs/bpf/my_route``
+path:
+
+::
+
+  $ bpftool iter pin ./bpf_iter_ipv6_route.o  /sys/fs/bpf/my_route
+
+And then print out the results using the following command:
+
+::
+
+  $ cat /sys/fs/bpf/my_route
+
+
+-------------------------------------------------------
+Implement Kernel Support for BPF Iterator Program Types
+-------------------------------------------------------
+
+To implement a BPF iterator in the kernel, the developer must make a one-time
+change to the following key data structure defined in the `bpf.h
+<https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/tree/include/linux/bpf.h>`_
+file.
+
+::
+
+  struct bpf_iter_reg {
+            const char *target;
+            bpf_iter_attach_target_t attach_target;
+            bpf_iter_detach_target_t detach_target;
+            bpf_iter_show_fdinfo_t show_fdinfo;
+            bpf_iter_fill_link_info_t fill_link_info;
+            bpf_iter_get_func_proto_t get_func_proto;
+            u32 ctx_arg_info_size;
+            u32 feature;
+            struct bpf_ctx_arg_aux ctx_arg_info[BPF_ITER_CTX_ARG_MAX];
+            const struct bpf_iter_seq_info *seq_info;
+  };
+
+After filling the data structure fields, call ``bpf_iter_reg_target()`` to
+register the iterator to the main BPF iterator subsystem.
+
+The following is the breakdown for each field in struct ``bpf_iter_reg``.
+
+.. list-table::
+   :widths: 25 50
+   :header-rows: 1
+
+   * - Fields
+     - Description
+   * - target
+     - Specifies the name of the BPF iterator. For example: ``bpf_map``,
+       ``bpf_map_elem``. The name should be different from other ``bpf_iter`` target names in the kernel.
+   * - attach_target and detach_target
+     - Allows for target specific ``link_create`` action since some targets
+       may need special processing. Called during the user space link_create stage.
+   * - show_fdinfo and fill_link_info
+     - Called to fill target specific information when user tries to get link
+       info associated with the iterator.
+   * - get_func_proto
+     - Permits a BPF iterator to access BPF helpers specific to the iterator.
+   * - ctx_arg_info_size and ctx_arg_info
+     - Specifies the verifier states for BPF program arguments associated with
+       the bpf iterator.
+   * - feature
+     - Specifies certain action requests in the kernel BPF iterator
+       infrastructure. Currently, only BPF_ITER_RESCHED is supported. This means
+       that the kernel function cond_resched() is called to avoid other kernel
+       subsystem (e.g., rcu) misbehaving.
+   * - seq_info
+     - Specifies certain action requests in the kernel BPF iterator
+       infrastructure. Currently, only BPF_ITER_RESCHED is supported. This means
+       that the kernel function cond_resched() is called to avoid other kernel
+       subsystem (e.g., rcu) misbehaving.
+
+
+`Click here
+<https://lore.kernel.org/bpf/20210212183107.50963-2-songliubraving@fb.com/>`_
+to see an implementation of the ``task_vma`` BPF iterator in the kernel.
+
+---------------------------------
+Parameterizing BPF Task Iterators
+---------------------------------
+
+By default, BPF iterators walk through all the objects of the specified types
+(processes, cgroups, maps, etc.) across the entire system to read relevant
+kernel data. But often, there are cases where we only care about a much smaller
+subset of iterable kernel objects, such as only iterating tasks within a
+specific process. Therefore, BPF iterator programs support filtering out objects
+from iteration by allowing user space to configure the iterator program when it
+is attached.
+
+--------------------------
+BPF Task Iterator Program
+--------------------------
+
+The following code is a BPF iterator program to print files and task information
+through the ``seq_file`` of the iterator. It is a standard BPF iterator program
+that visits every file of an iterator. We will use this BPF program in our
+example later.
+
+::
+
+  #include <vmlinux.h>
+  #include <bpf/bpf_helpers.h>
+
+  char _license[] SEC("license") = "GPL";
+
+  SEC("iter/task_file")
+  int dump_task_file(struct bpf_iter__task_file *ctx)
+  {
+        struct seq_file *seq = ctx->meta->seq;
+        struct task_struct *task = ctx->task;
+        struct file *file = ctx->file;
+        __u32 fd = ctx->fd;
+        if (task == NULL || file == NULL)
+                return 0;
+        if (ctx->meta->seq_num == 0) {
+                BPF_SEQ_PRINTF(seq, "    tgid      pid       fd      file\n");
+        }
+        BPF_SEQ_PRINTF(seq, "%8d %8d %8d %lx\n", task->tgid, task->pid, fd,
+                        (long)file->f_op);
+        return 0;
+  }
+
+----------------------------------------
+Creating a File Iterator with Parameters
+----------------------------------------
+
+Now, let us look at how to create an iterator that includes only files of a
+process.
+
+First,  fill the ``bpf_iter_attach_opts`` struct as shown below:
+
+::
+
+  LIBBPF_OPTS(bpf_iter_attach_opts, opts);
+  union bpf_iter_link_info linfo;
+  memset(&linfo, 0, sizeof(linfo));
+  linfo.task.pid = getpid();
+  opts.link_info = &linfo;
+  opts.link_info_len = sizeof(linfo);
+
+``linfo.task.pid``, if it is non-zero, directs the kernel to create an iterator
+that only includes opened files for the process with the specified ``pid``. In
+this example, we will only be iterating files for our process. If
+``linfo.task.pid`` is zero, the iterator will visit every opened file of every
+process. Similarly, ``linfo.task.tid`` directs the kernel to create an iterator
+that visits opened files of a specific thread, not a process. In this example,
+``linfo.task.tid`` is different from ``linfo.task.pid`` only if the thread has a
+separate file descriptor table. In most circumstances, all process threads share
+a single file descriptor table.
+
+Now, in the userspace program, pass the pointer of struct to the
+``bpf_program__attach_iter()``.
+
+::
+
+  link = bpf_program__attach_iter(prog, &opts); iter_fd =
+  bpf_iter_create(bpf_link__fd(link));
+
+If both *tid* and *pid* are zero, an iterator created from this struct
+``bpf_iter_attach_opts`` will include every opened file of every task in the
+system (in the namespace, actually.) It is the same as passing a NULL as the
+second argument to ``bpf_program__attach_iter()``.
+
+The whole program looks like the following code:
+
+::
+
+  #include <stdio.h>
+  #include <unistd.h>
+  #include <bpf/bpf.h>
+  #include <bpf/libbpf.h>
+  #include "bpf_iter_task_ex.skel.h"
+
+  static int do_read_opts(struct bpf_program *prog, struct bpf_iter_attach_opts *opts)
+  {
+        struct bpf_link *link;
+        char buf[16] = {};
+        int iter_fd = -1, len;
+        int ret = 0;
+
+        link = bpf_program__attach_iter(prog, opts);
+        if (!link) {
+                fprintf(stderr, "bpf_program__attach_iter() fails\n");
+                return -1;
+        }
+        iter_fd = bpf_iter_create(bpf_link__fd(link));
+        if (iter_fd < 0) {
+                fprintf(stderr, "bpf_iter_create() fails\n");
+                ret = -1;
+                goto free_link;
+        }
+        /* not check contents, but ensure read() ends without error */
+        while ((len = read(iter_fd, buf, sizeof(buf) - 1)) > 0) {
+                buf[len] = 0;
+                printf("%s", buf);
+        }
+        printf("\n");
+  free_link:
+        if (iter_fd >= 0)
+                close(iter_fd);
+        bpf_link__destroy(link);
+        return 0;
+  }
+
+  static void test_task_file(void)
+  {
+        LIBBPF_OPTS(bpf_iter_attach_opts, opts);
+        struct bpf_iter_task_ex *skel;
+        union bpf_iter_link_info linfo;
+        skel = bpf_iter_task_ex__open_and_load();
+        if (skel == NULL)
+                return;
+        memset(&linfo, 0, sizeof(linfo));
+        linfo.task.pid = getpid();
+        opts.link_info = &linfo;
+        opts.link_info_len = sizeof(linfo);
+        printf("PID %d\n", getpid());
+        do_read_opts(skel->progs.dump_task_file, &opts);
+        bpf_iter_task_ex__destroy(skel);
+  }
+
+  int main(int argc, const char * const * argv)
+  {
+        test_task_file();
+        return 0;
+  }
+
+The following lines are the output of the program.
+::
+
+  PID 1859
+
+     tgid      pid       fd      file
+     1859     1859        0 ffffffff82270aa0
+     1859     1859        1 ffffffff82270aa0
+     1859     1859        2 ffffffff82270aa0
+     1859     1859        3 ffffffff82272980
+     1859     1859        4 ffffffff8225e120
+     1859     1859        5 ffffffff82255120
+     1859     1859        6 ffffffff82254f00
+     1859     1859        7 ffffffff82254d80
+     1859     1859        8 ffffffff8225abe0
+
+------------------
+Without Parameters
+------------------
+
+Let us look at how a BPF iterator without parameters skips files of other
+processes in the system. In this case, the BPF program has to check the pid or
+the tid of tasks, or it will receive every opened file in the system (in the
+current *pid* namespace, actually). So, we usually add a global variable in the
+BPF program to pass a *pid* to the BPF program.
+
+The BPF program would look like the following block.
+
+  ::
+
+    ......
+    int target_pid = 0;
+
+    SEC("iter/task_file")
+    int dump_task_file(struct bpf_iter__task_file *ctx)
+    {
+          ......
+          if (task->tgid != target_pid) /* Check task->pid instead to check thread IDs */
+                  return 0;
+          BPF_SEQ_PRINTF(seq, "%8d %8d %8d %lx\n", task->tgid, task->pid, fd,
+                          (long)file->f_op);
+          return 0;
+    }
+
+The user space program would look like the following block:
+
+  ::
+
+    ......
+    static void test_task_file(void)
+    {
+          ......
+          skel = bpf_iter_task_ex__open_and_load();
+          if (skel == NULL)
+                  return;
+          skel->bss->target_pid = getpid(); /* process ID.  For thread id, use gettid() */
+          memset(&linfo, 0, sizeof(linfo));
+          linfo.task.pid = getpid();
+          opts.link_info = &linfo;
+          opts.link_info_len = sizeof(linfo);
+          ......
+    }
+
+``target_pid`` is a global variable in the BPF program. The user space program
+should initialize the variable with a process ID to skip opened files of other
+processes in the BPF program. When you parametrize a BPF iterator, the iterator
+calls the BPF program fewer times which can save significant resources.
+
+---------------------------
+Parametrizing VMA Iterators
+---------------------------
+
+By default, a BPF VMA iterator includes every VMA in every process.  However,
+you can still specify a process or a thread to include only its VMAs. Unlike
+files, a thread can not have a separate address space (since Linux 2.6.0-test6).
+Here, using *tid* makes no difference from using *pid*.
+
+----------------------------
+Parametrizing Task Iterators
+----------------------------
+
+A BPF task iterator with *pid* includes all tasks (threads) of a process. The
+BPF program receives these tasks one after another. You can specify a BPF task
+iterator with *tid* parameter to include only the tasks that match the given
+*tid*.
diff --git a/Documentation/bpf/bpf_licensing.rst b/Documentation/bpf/bpf_licensing.rst
new file mode 100644
index 000000000000..b19c433f41d2
--- /dev/null
+++ b/Documentation/bpf/bpf_licensing.rst
@@ -0,0 +1,92 @@
+=============
+BPF licensing
+=============
+
+Background
+==========
+
+* Classic BPF was BSD licensed
+
+"BPF" was originally introduced as BSD Packet Filter in
+http://www.tcpdump.org/papers/bpf-usenix93.pdf. The corresponding instruction
+set and its implementation came from BSD with BSD license. That original
+instruction set is now known as "classic BPF".
+
+However an instruction set is a specification for machine-language interaction,
+similar to a programming language.  It is not a code. Therefore, the
+application of a BSD license may be misleading in a certain context, as the
+instruction set may enjoy no copyright protection.
+
+* eBPF (extended BPF) instruction set continues to be BSD
+
+In 2014, the classic BPF instruction set was significantly extended. We
+typically refer to this instruction set as eBPF to disambiguate it from cBPF.
+The eBPF instruction set is still BSD licensed.
+
+Implementations of eBPF
+=======================
+
+Using the eBPF instruction set requires implementing code in both kernel space
+and user space.
+
+In Linux Kernel
+---------------
+
+The reference implementations of the eBPF interpreter and various just-in-time
+compilers are part of Linux and are GPLv2 licensed. The implementation of
+eBPF helper functions is also GPLv2 licensed. Interpreters, JITs, helpers,
+and verifiers are called eBPF runtime.
+
+In User Space
+-------------
+
+There are also implementations of eBPF runtime (interpreter, JITs, helper
+functions) under
+Apache2 (https://github.com/iovisor/ubpf),
+MIT (https://github.com/qmonnet/rbpf), and
+BSD (https://github.com/DPDK/dpdk/blob/main/lib/librte_bpf).
+
+In HW
+-----
+
+The HW can choose to execute eBPF instruction natively and provide eBPF runtime
+in HW or via the use of implementing firmware with a proprietary license.
+
+In other operating systems
+--------------------------
+
+Other kernels or user space implementations of eBPF instruction set and runtime
+can have proprietary licenses.
+
+Using BPF programs in the Linux kernel
+======================================
+
+Linux Kernel (while being GPLv2) allows linking of proprietary kernel modules
+under these rules:
+Documentation/process/license-rules.rst
+
+When a kernel module is loaded, the linux kernel checks which functions it
+intends to use. If any function is marked as "GPL only," the corresponding
+module or program has to have GPL compatible license.
+
+Loading BPF program into the Linux kernel is similar to loading a kernel
+module. BPF is loaded at run time and not statically linked to the Linux
+kernel. BPF program loading follows the same license checking rules as kernel
+modules. BPF programs can be proprietary if they don't use "GPL only" BPF
+helper functions.
+
+Further, some BPF program types - Linux Security Modules (LSM) and TCP
+Congestion Control (struct_ops), as of Aug 2021 - are required to be GPL
+compatible even if they don't use "GPL only" helper functions directly. The
+registration step of LSM and TCP congestion control modules of the Linux
+kernel is done through EXPORT_SYMBOL_GPL kernel functions. In that sense LSM
+and struct_ops BPF programs are implicitly calling "GPL only" functions.
+The same restriction applies to BPF programs that call kernel functions
+directly via unstable interface also known as "kfunc".
+
+Packaging BPF programs with user space applications
+====================================================
+
+Generally, proprietary-licensed applications and GPL licensed BPF programs
+written for the Linux kernel in the same package can co-exist because they are
+separate executable processes. This applies to both cBPF and eBPF programs.
diff --git a/Documentation/bpf/bpf_lsm.rst b/Documentation/bpf/bpf_lsm.rst
deleted file mode 100644
index 0dc3fb0d9544..000000000000
--- a/Documentation/bpf/bpf_lsm.rst
+++ /dev/null
@@ -1,143 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0+
-.. Copyright (C) 2020 Google LLC.
-
-================
-LSM BPF Programs
-================
-
-These BPF programs allow runtime instrumentation of the LSM hooks by privileged
-users to implement system-wide MAC (Mandatory Access Control) and Audit
-policies using eBPF.
-
-Structure
----------
-
-The example shows an eBPF program that can be attached to the ``file_mprotect``
-LSM hook:
-
-.. c:function:: int file_mprotect(struct vm_area_struct *vma, unsigned long reqprot, unsigned long prot);
-
-Other LSM hooks which can be instrumented can be found in
-``include/linux/lsm_hooks.h``.
-
-eBPF programs that use Documentation/bpf/btf.rst do not need to include kernel
-headers for accessing information from the attached eBPF program's context.
-They can simply declare the structures in the eBPF program and only specify
-the fields that need to be accessed.
-
-.. code-block:: c
-
-	struct mm_struct {
-		unsigned long start_brk, brk, start_stack;
-	} __attribute__((preserve_access_index));
-
-	struct vm_area_struct {
-		unsigned long start_brk, brk, start_stack;
-		unsigned long vm_start, vm_end;
-		struct mm_struct *vm_mm;
-	} __attribute__((preserve_access_index));
-
-
-.. note:: The order of the fields is irrelevant.
-
-This can be further simplified (if one has access to the BTF information at
-build time) by generating the ``vmlinux.h`` with:
-
-.. code-block:: console
-
-	# bpftool btf dump file <path-to-btf-vmlinux> format c > vmlinux.h
-
-.. note:: ``path-to-btf-vmlinux`` can be ``/sys/kernel/btf/vmlinux`` if the
-	  build environment matches the environment the BPF programs are
-	  deployed in.
-
-The ``vmlinux.h`` can then simply be included in the BPF programs without
-requiring the definition of the types.
-
-The eBPF programs can be declared using the``BPF_PROG``
-macros defined in `tools/lib/bpf/bpf_tracing.h`_. In this
-example:
-
-	* ``"lsm/file_mprotect"`` indicates the LSM hook that the program must
-	  be attached to
-	* ``mprotect_audit`` is the name of the eBPF program
-
-.. code-block:: c
-
-	SEC("lsm/file_mprotect")
-	int BPF_PROG(mprotect_audit, struct vm_area_struct *vma,
-		     unsigned long reqprot, unsigned long prot, int ret)
-	{
-		/* ret is the return value from the previous BPF program
-		 * or 0 if it's the first hook.
-		 */
-		if (ret != 0)
-			return ret;
-
-		int is_heap;
-
-		is_heap = (vma->vm_start >= vma->vm_mm->start_brk &&
-			   vma->vm_end <= vma->vm_mm->brk);
-
-		/* Return an -EPERM or write information to the perf events buffer
-		 * for auditing
-		 */
-		if (is_heap)
-			return -EPERM;
-	}
-
-The ``__attribute__((preserve_access_index))`` is a clang feature that allows
-the BPF verifier to update the offsets for the access at runtime using the
-Documentation/bpf/btf.rst information. Since the BPF verifier is aware of the
-types, it also validates all the accesses made to the various types in the
-eBPF program.
-
-Loading
--------
-
-eBPF programs can be loaded with the :manpage:`bpf(2)` syscall's
-``BPF_PROG_LOAD`` operation:
-
-.. code-block:: c
-
-	struct bpf_object *obj;
-
-	obj = bpf_object__open("./my_prog.o");
-	bpf_object__load(obj);
-
-This can be simplified by using a skeleton header generated by ``bpftool``:
-
-.. code-block:: console
-
-	# bpftool gen skeleton my_prog.o > my_prog.skel.h
-
-and the program can be loaded by including ``my_prog.skel.h`` and using
-the generated helper, ``my_prog__open_and_load``.
-
-Attachment to LSM Hooks
------------------------
-
-The LSM allows attachment of eBPF programs as LSM hooks using :manpage:`bpf(2)`
-syscall's ``BPF_RAW_TRACEPOINT_OPEN`` operation or more simply by
-using the libbpf helper ``bpf_program__attach_lsm``.
-
-The program can be detached from the LSM hook by *destroying* the ``link``
-link returned by ``bpf_program__attach_lsm`` using ``bpf_link__destroy``.
-
-One can also use the helpers generated in ``my_prog.skel.h`` i.e.
-``my_prog__attach`` for attachment and ``my_prog__destroy`` for cleaning up.
-
-Examples
---------
-
-An example eBPF program can be found in
-`tools/testing/selftests/bpf/progs/lsm.c`_ and the corresponding
-userspace code in `tools/testing/selftests/bpf/prog_tests/test_lsm.c`_
-
-.. Links
-.. _tools/lib/bpf/bpf_tracing.h:
-   https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/lib/bpf/bpf_tracing.h
-.. _tools/testing/selftests/bpf/progs/lsm.c:
-   https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/testing/selftests/bpf/progs/lsm.c
-.. _tools/testing/selftests/bpf/prog_tests/test_lsm.c:
-   https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/testing/selftests/bpf/prog_tests/test_lsm.c
diff --git a/Documentation/bpf/bpf_prog_run.rst b/Documentation/bpf/bpf_prog_run.rst
new file mode 100644
index 000000000000..4868c909df5c
--- /dev/null
+++ b/Documentation/bpf/bpf_prog_run.rst
@@ -0,0 +1,117 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================
+Running BPF programs from userspace
+===================================
+
+This document describes the ``BPF_PROG_RUN`` facility for running BPF programs
+from userspace.
+
+.. contents::
+    :local:
+    :depth: 2
+
+
+Overview
+--------
+
+The ``BPF_PROG_RUN`` command can be used through the ``bpf()`` syscall to
+execute a BPF program in the kernel and return the results to userspace. This
+can be used to unit test BPF programs against user-supplied context objects, and
+as way to explicitly execute programs in the kernel for their side effects. The
+command was previously named ``BPF_PROG_TEST_RUN``, and both constants continue
+to be defined in the UAPI header, aliased to the same value.
+
+The ``BPF_PROG_RUN`` command can be used to execute BPF programs of the
+following types:
+
+- ``BPF_PROG_TYPE_SOCKET_FILTER``
+- ``BPF_PROG_TYPE_SCHED_CLS``
+- ``BPF_PROG_TYPE_SCHED_ACT``
+- ``BPF_PROG_TYPE_XDP``
+- ``BPF_PROG_TYPE_SK_LOOKUP``
+- ``BPF_PROG_TYPE_CGROUP_SKB``
+- ``BPF_PROG_TYPE_LWT_IN``
+- ``BPF_PROG_TYPE_LWT_OUT``
+- ``BPF_PROG_TYPE_LWT_XMIT``
+- ``BPF_PROG_TYPE_LWT_SEG6LOCAL``
+- ``BPF_PROG_TYPE_FLOW_DISSECTOR``
+- ``BPF_PROG_TYPE_STRUCT_OPS``
+- ``BPF_PROG_TYPE_RAW_TRACEPOINT``
+- ``BPF_PROG_TYPE_SYSCALL``
+
+When using the ``BPF_PROG_RUN`` command, userspace supplies an input context
+object and (for program types operating on network packets) a buffer containing
+the packet data that the BPF program will operate on. The kernel will then
+execute the program and return the results to userspace. Note that programs will
+not have any side effects while being run in this mode; in particular, packets
+will not actually be redirected or dropped, the program return code will just be
+returned to userspace. A separate mode for live execution of XDP programs is
+provided, documented separately below.
+
+Running XDP programs in "live frame mode"
+-----------------------------------------
+
+The ``BPF_PROG_RUN`` command has a separate mode for running live XDP programs,
+which can be used to execute XDP programs in a way where packets will actually
+be processed by the kernel after the execution of the XDP program as if they
+arrived on a physical interface. This mode is activated by setting the
+``BPF_F_TEST_XDP_LIVE_FRAMES`` flag when supplying an XDP program to
+``BPF_PROG_RUN``.
+
+The live packet mode is optimised for high performance execution of the supplied
+XDP program many times (suitable for, e.g., running as a traffic generator),
+which means the semantics are not quite as straight-forward as the regular test
+run mode. Specifically:
+
+- When executing an XDP program in live frame mode, the result of the execution
+  will not be returned to userspace; instead, the kernel will perform the
+  operation indicated by the program's return code (drop the packet, redirect
+  it, etc). For this reason, setting the ``data_out`` or ``ctx_out`` attributes
+  in the syscall parameters when running in this mode will be rejected. In
+  addition, not all failures will be reported back to userspace directly;
+  specifically, only fatal errors in setup or during execution (like memory
+  allocation errors) will halt execution and return an error. If an error occurs
+  in packet processing, like a failure to redirect to a given interface,
+  execution will continue with the next repetition; these errors can be detected
+  via the same trace points as for regular XDP programs.
+
+- Userspace can supply an ifindex as part of the context object, just like in
+  the regular (non-live) mode. The XDP program will be executed as though the
+  packet arrived on this interface; i.e., the ``ingress_ifindex`` of the context
+  object will point to that interface. Furthermore, if the XDP program returns
+  ``XDP_PASS``, the packet will be injected into the kernel networking stack as
+  though it arrived on that ifindex, and if it returns ``XDP_TX``, the packet
+  will be transmitted *out* of that same interface. Do note, though, that
+  because the program execution is not happening in driver context, an
+  ``XDP_TX`` is actually turned into the same action as an ``XDP_REDIRECT`` to
+  that same interface (i.e., it will only work if the driver has support for the
+  ``ndo_xdp_xmit`` driver op).
+
+- When running the program with multiple repetitions, the execution will happen
+  in batches. The batch size defaults to 64 packets (which is same as the
+  maximum NAPI receive batch size), but can be specified by userspace through
+  the ``batch_size`` parameter, up to a maximum of 256 packets. For each batch,
+  the kernel executes the XDP program repeatedly, each invocation getting a
+  separate copy of the packet data. For each repetition, if the program drops
+  the packet, the data page is immediately recycled (see below). Otherwise, the
+  packet is buffered until the end of the batch, at which point all packets
+  buffered this way during the batch are transmitted at once.
+
+- When setting up the test run, the kernel will initialise a pool of memory
+  pages of the same size as the batch size. Each memory page will be initialised
+  with the initial packet data supplied by userspace at ``BPF_PROG_RUN``
+  invocation. When possible, the pages will be recycled on future program
+  invocations, to improve performance. Pages will generally be recycled a full
+  batch at a time, except when a packet is dropped (by return code or because
+  of, say, a redirection error), in which case that page will be recycled
+  immediately. If a packet ends up being passed to the regular networking stack
+  (because the XDP program returns ``XDP_PASS``, or because it ends up being
+  redirected to an interface that injects it into the stack), the page will be
+  released and a new one will be allocated when the pool is empty.
+
+  When recycling, the page content is not rewritten; only the packet boundary
+  pointers (``data``, ``data_end`` and ``data_meta``) in the context object will
+  be reset to the original values. This means that if a program rewrites the
+  packet contents, it has to be prepared to see either the original content or
+  the modified version on subsequent invocations.
diff --git a/Documentation/bpf/btf.rst b/Documentation/bpf/btf.rst
index 846354cd2d69..7cd7c5415a99 100644
--- a/Documentation/bpf/btf.rst
+++ b/Documentation/bpf/btf.rst
@@ -3,7 +3,7 @@ BPF Type Format (BTF)
 =====================
 
 1. Introduction
-***************
+===============
 
 BTF (BPF Type Format) is the metadata format which encodes the debug info
 related to BPF program/map. The name BTF was used initially to describe data
@@ -30,7 +30,7 @@ sections are discussed in details in :ref:`BTF_Type_String`.
 .. _BTF_Type_String:
 
 2. BTF Type and String Encoding
-*******************************
+===============================
 
 The file ``include/uapi/linux/btf.h`` provides high-level definition of how
 types/strings are encoded.
@@ -57,13 +57,13 @@ little-endian target. The ``btf_header`` is designed to be extensible with
 generated.
 
 2.1 String Encoding
-===================
+-------------------
 
 The first string in the string section must be a null string. The rest of
 string table is a concatenation of other null-terminated strings.
 
 2.2 Type Encoding
-=================
+-----------------
 
 The type id ``0`` is reserved for ``void`` type. The type section is parsed
 sequentially and type id is assigned to each recognized type starting from id
@@ -74,7 +74,7 @@ sequentially and type id is assigned to each recognized type starting from id
     #define BTF_KIND_ARRAY          3       /* Array        */
     #define BTF_KIND_STRUCT         4       /* Struct       */
     #define BTF_KIND_UNION          5       /* Union        */
-    #define BTF_KIND_ENUM           6       /* Enumeration  */
+    #define BTF_KIND_ENUM           6       /* Enumeration up to 32-bit values */
     #define BTF_KIND_FWD            7       /* Forward      */
     #define BTF_KIND_TYPEDEF        8       /* Typedef      */
     #define BTF_KIND_VOLATILE       9       /* Volatile     */
@@ -85,6 +85,9 @@ sequentially and type id is assigned to each recognized type starting from id
     #define BTF_KIND_VAR            14      /* Variable     */
     #define BTF_KIND_DATASEC        15      /* Section      */
     #define BTF_KIND_FLOAT          16      /* Floating point       */
+    #define BTF_KIND_DECL_TAG       17      /* Decl Tag     */
+    #define BTF_KIND_TYPE_TAG       18      /* Type Tag     */
+    #define BTF_KIND_ENUM64         19      /* Enumeration up to 64-bit values */
 
 Note that the type section encodes debug info, not just pure types.
 ``BTF_KIND_FUNC`` is not a type, and it represents a defined subprogram.
@@ -99,14 +102,14 @@ Each type contains the following common data::
          * bits 24-28: kind (e.g. int, ptr, array...etc)
          * bits 29-30: unused
          * bit     31: kind_flag, currently used by
-         *             struct, union and fwd
+         *             struct, union, fwd, enum and enum64.
          */
         __u32 info;
-        /* "size" is used by INT, ENUM, STRUCT and UNION.
+        /* "size" is used by INT, ENUM, STRUCT, UNION and ENUM64.
          * "size" tells the size of the type it is describing.
          *
          * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT,
-         * FUNC and FUNC_PROTO.
+         * FUNC, FUNC_PROTO, DECL_TAG and TYPE_TAG.
          * "type" is a type_id referring to another type.
          */
         union {
@@ -279,10 +282,10 @@ modes exist:
 
 ``struct btf_type`` encoding requirement:
   * ``name_off``: 0 or offset to a valid C identifier
-  * ``info.kind_flag``: 0
+  * ``info.kind_flag``: 0 for unsigned, 1 for signed
   * ``info.kind``: BTF_KIND_ENUM
   * ``info.vlen``: number of enum values
-  * ``size``: 4
+  * ``size``: 1/2/4/8
 
 ``btf_type`` is followed by ``info.vlen`` number of ``struct btf_enum``.::
 
@@ -295,6 +298,10 @@ The ``btf_enum`` encoding:
   * ``name_off``: offset to a valid C identifier
   * ``val``: any value
 
+If the original enum value is signed and the size is less than 4,
+that value will be sign extended into 4 bytes. If the size is 8,
+the value will be truncated into 4 bytes.
+
 2.2.7 BTF_KIND_FWD
 ~~~~~~~~~~~~~~~~~~
 
@@ -362,7 +369,8 @@ No additional type data follow ``btf_type``.
   * ``name_off``: offset to a valid C identifier
   * ``info.kind_flag``: 0
   * ``info.kind``: BTF_KIND_FUNC
-  * ``info.vlen``: 0
+  * ``info.vlen``: linkage information (BTF_FUNC_STATIC, BTF_FUNC_GLOBAL
+                   or BTF_FUNC_EXTERN)
   * ``type``: a BTF_KIND_FUNC_PROTO type
 
 No additional type data follow ``btf_type``.
@@ -373,6 +381,9 @@ type. The BTF_KIND_FUNC may in turn be referenced by a func_info in the
 :ref:`BTF_Ext_Section` (ELF) or in the arguments to :ref:`BPF_Prog_Load`
 (ABI).
 
+Currently, only linkage values of BTF_FUNC_STATIC and BTF_FUNC_GLOBAL are
+supported in the kernel.
+
 2.2.13 BTF_KIND_FUNC_PROTO
 ~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -465,8 +476,83 @@ map definition.
 
 No additional type data follow ``btf_type``.
 
+2.2.17 BTF_KIND_DECL_TAG
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+``struct btf_type`` encoding requirement:
+ * ``name_off``: offset to a non-empty string
+ * ``info.kind_flag``: 0
+ * ``info.kind``: BTF_KIND_DECL_TAG
+ * ``info.vlen``: 0
+ * ``type``: ``struct``, ``union``, ``func``, ``var`` or ``typedef``
+
+``btf_type`` is followed by ``struct btf_decl_tag``.::
+
+    struct btf_decl_tag {
+        __u32   component_idx;
+    };
+
+The ``name_off`` encodes btf_decl_tag attribute string.
+The ``type`` should be ``struct``, ``union``, ``func``, ``var`` or ``typedef``.
+For ``var`` or ``typedef`` type, ``btf_decl_tag.component_idx`` must be ``-1``.
+For the other three types, if the btf_decl_tag attribute is
+applied to the ``struct``, ``union`` or ``func`` itself,
+``btf_decl_tag.component_idx`` must be ``-1``. Otherwise,
+the attribute is applied to a ``struct``/``union`` member or
+a ``func`` argument, and ``btf_decl_tag.component_idx`` should be a
+valid index (starting from 0) pointing to a member or an argument.
+
+2.2.18 BTF_KIND_TYPE_TAG
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+``struct btf_type`` encoding requirement:
+ * ``name_off``: offset to a non-empty string
+ * ``info.kind_flag``: 0
+ * ``info.kind``: BTF_KIND_TYPE_TAG
+ * ``info.vlen``: 0
+ * ``type``: the type with ``btf_type_tag`` attribute
+
+Currently, ``BTF_KIND_TYPE_TAG`` is only emitted for pointer types.
+It has the following btf type chain:
+::
+
+  ptr -> [type_tag]*
+      -> [const | volatile | restrict | typedef]*
+      -> base_type
+
+Basically, a pointer type points to zero or more
+type_tag, then zero or more const/volatile/restrict/typedef
+and finally the base type. The base type is one of
+int, ptr, array, struct, union, enum, func_proto and float types.
+
+2.2.19 BTF_KIND_ENUM64
+~~~~~~~~~~~~~~~~~~~~~~
+
+``struct btf_type`` encoding requirement:
+  * ``name_off``: 0 or offset to a valid C identifier
+  * ``info.kind_flag``: 0 for unsigned, 1 for signed
+  * ``info.kind``: BTF_KIND_ENUM64
+  * ``info.vlen``: number of enum values
+  * ``size``: 1/2/4/8
+
+``btf_type`` is followed by ``info.vlen`` number of ``struct btf_enum64``.::
+
+    struct btf_enum64 {
+        __u32   name_off;
+        __u32   val_lo32;
+        __u32   val_hi32;
+    };
+
+The ``btf_enum64`` encoding:
+  * ``name_off``: offset to a valid C identifier
+  * ``val_lo32``: lower 32-bit value for a 64-bit value
+  * ``val_hi32``: high 32-bit value for a 64-bit value
+
+If the original enum value is signed and the size is less than 8,
+that value will be sign extended into 8 bytes.
+
 3. BTF Kernel API
-*****************
+=================
 
 The following bpf syscall command involves BTF:
    * BPF_BTF_LOAD: load a blob of BTF data into kernel
@@ -509,14 +595,14 @@ The workflow typically looks like:
 
 
 3.1 BPF_BTF_LOAD
-================
+----------------
 
 Load a blob of BTF data into kernel. A blob of data, described in
 :ref:`BTF_Type_String`, can be directly loaded into the kernel. A ``btf_fd``
 is returned to a userspace.
 
 3.2 BPF_MAP_CREATE
-==================
+------------------
 
 A map can be created with ``btf_fd`` and specified key/value type id.::
 
@@ -527,23 +613,20 @@ A map can be created with ``btf_fd`` and specified key/value type id.::
 In libbpf, the map can be defined with extra annotation like below:
 ::
 
-    struct bpf_map_def SEC("maps") btf_map = {
-        .type = BPF_MAP_TYPE_ARRAY,
-        .key_size = sizeof(int),
-        .value_size = sizeof(struct ipv_counts),
-        .max_entries = 4,
-    };
-    BPF_ANNOTATE_KV_PAIR(btf_map, int, struct ipv_counts);
+    struct {
+        __uint(type, BPF_MAP_TYPE_ARRAY);
+        __type(key, int);
+        __type(value, struct ipv_counts);
+        __uint(max_entries, 4);
+    } btf_map SEC(".maps");
 
-Here, the parameters for macro BPF_ANNOTATE_KV_PAIR are map name, key and
-value types for the map. During ELF parsing, libbpf is able to extract
-key/value type_id's and assign them to BPF_MAP_CREATE attributes
-automatically.
+During ELF parsing, libbpf is able to extract key/value type_id's and assign
+them to BPF_MAP_CREATE attributes automatically.
 
 .. _BPF_Prog_Load:
 
 3.3 BPF_PROG_LOAD
-=================
+-----------------
 
 During prog_load, func_info and line_info can be passed to kernel with proper
 values for the following attributes:
@@ -593,7 +676,7 @@ For line_info, the line number and column number are defined as below:
     #define BPF_LINE_INFO_LINE_COL(line_col)        ((line_col) & 0x3ff)
 
 3.4 BPF_{PROG,MAP}_GET_NEXT_ID
-==============================
+------------------------------
 
 In kernel, every loaded program, map or btf has a unique id. The id won't
 change during the lifetime of a program, map, or btf.
@@ -603,13 +686,13 @@ each command, to user space, for bpf program or maps, respectively, so an
 inspection tool can inspect all programs and maps.
 
 3.5 BPF_{PROG,MAP}_GET_FD_BY_ID
-===============================
+-------------------------------
 
 An introspection tool cannot use id to get details about program or maps.
 A file descriptor needs to be obtained first for reference-counting purpose.
 
 3.6 BPF_OBJ_GET_INFO_BY_FD
-==========================
+--------------------------
 
 Once a program/map fd is acquired, an introspection tool can get the detailed
 information from kernel about this fd, some of which are BTF-related. For
@@ -618,7 +701,7 @@ example, ``bpf_map_info`` returns ``btf_id`` and key/value type ids.
 bpf byte codes, and jited_line_info.
 
 3.7 BPF_BTF_GET_FD_BY_ID
-========================
+------------------------
 
 With ``btf_id`` obtained in ``bpf_map_info`` and ``bpf_prog_info``, bpf
 syscall command BPF_BTF_GET_FD_BY_ID can retrieve a btf fd. Then, with
@@ -630,10 +713,10 @@ tool has full btf knowledge and is able to pretty print map key/values, dump
 func signatures and line info, along with byte/jit codes.
 
 4. ELF File Format Interface
-****************************
+============================
 
 4.1 .BTF section
-================
+----------------
 
 The .BTF section contains type and string data. The format of this section is
 same as the one describe in :ref:`BTF_Type_String`.
@@ -641,7 +724,7 @@ same as the one describe in :ref:`BTF_Type_String`.
 .. _BTF_Ext_Section:
 
 4.2 .BTF.ext section
-====================
+--------------------
 
 The .BTF.ext section encodes func_info and line_info which needs loader
 manipulation before loading into the kernel.
@@ -705,7 +788,7 @@ bpf_insn``. For ELF API, the ``insn_off`` is the byte offset from the
 beginning of section (``btf_ext_info_sec->sec_name_off``).
 
 4.2 .BTF_ids section
-====================
+--------------------
 
 The .BTF_ids section encodes BTF ID values that are used within the kernel.
 
@@ -766,10 +849,10 @@ All the BTF ID lists and sets are compiled in the .BTF_ids section and
 resolved during the linking phase of kernel build by ``resolve_btfids`` tool.
 
 5. Using BTF
-************
+============
 
 5.1 bpftool map pretty print
-============================
+----------------------------
 
 With BTF, the map key/value can be printed based on fields rather than simply
 raw bytes. This is especially valuable for large structure or if your data
@@ -786,13 +869,12 @@ structure has bitfields. For example, for the following map,::
            ___A b1:4;
            enum A b2:4;
       };
-      struct bpf_map_def SEC("maps") tmpmap = {
-           .type = BPF_MAP_TYPE_ARRAY,
-           .key_size = sizeof(__u32),
-           .value_size = sizeof(struct tmp_t),
-           .max_entries = 1,
-      };
-      BPF_ANNOTATE_KV_PAIR(tmpmap, int, struct tmp_t);
+      struct {
+           __uint(type, BPF_MAP_TYPE_ARRAY);
+           __type(key, int);
+           __type(value, struct tmp_t);
+           __uint(max_entries, 1);
+      } tmpmap SEC(".maps");
 
 bpftool is able to pretty print like below:
 ::
@@ -811,7 +893,7 @@ bpftool is able to pretty print like below:
       ]
 
 5.2 bpftool prog dump
-=====================
+---------------------
 
 The following is an example showing how func_info and line_info can help prog
 dump with better kernel symbol names, function prototypes and line
@@ -845,7 +927,7 @@ information.::
     [...]
 
 5.3 Verifier Log
-================
+----------------
 
 The following is an example of how line_info can help debugging verification
 failure.::
@@ -871,7 +953,7 @@ failure.::
         R2 offset is outside of the packet
 
 6. BTF Generation
-*****************
+=================
 
 You need latest pahole
 
@@ -978,6 +1060,11 @@ format.::
             .long   8206                    # Line 8 Col 14
 
 7. Testing
-**********
+==========
+
+The kernel BPF selftest `tools/testing/selftests/bpf/prog_tests/btf.c`_
+provides an extensive set of BTF-related tests.
 
-Kernel bpf selftest `test_btf.c` provides extensive set of BTF-related tests.
+.. Links
+.. _tools/testing/selftests/bpf/prog_tests/btf.c:
+   https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/testing/selftests/bpf/prog_tests/btf.c
diff --git a/Documentation/bpf/clang-notes.rst b/Documentation/bpf/clang-notes.rst
new file mode 100644
index 000000000000..2c872a1ee08e
--- /dev/null
+++ b/Documentation/bpf/clang-notes.rst
@@ -0,0 +1,36 @@
+.. contents::
+.. sectnum::
+
+==========================
+Clang implementation notes
+==========================
+
+This document provides more details specific to the Clang/LLVM implementation of the eBPF instruction set.
+
+Versions
+========
+
+Clang defined "CPU" versions, where a CPU version of 3 corresponds to the current eBPF ISA.
+
+Clang can select the eBPF ISA version using ``-mcpu=v3`` for example to select version 3.
+
+Arithmetic instructions
+=======================
+
+For CPU versions prior to 3, Clang v7.0 and later can enable ``BPF_ALU`` support with
+``-Xclang -target-feature -Xclang +alu32``.  In CPU version 3, support is automatically included.
+
+Jump instructions
+=================
+
+If ``-O0`` is used, Clang will generate the ``BPF_CALL | BPF_X | BPF_JMP`` (0x8d)
+instruction, which is not supported by the Linux kernel verifier.
+
+Atomic operations
+=================
+
+Clang can generate atomic instructions by default when ``-mcpu=v3`` is
+enabled. If a lower version for ``-mcpu`` is set, the only atomic instruction
+Clang can generate is ``BPF_ADD`` *without* ``BPF_FETCH``. If you need to enable
+the atomics features, while keeping a lower ``-mcpu`` version, you can use
+``-Xclang -target-feature -Xclang +alu32``.
diff --git a/Documentation/bpf/classic_vs_extended.rst b/Documentation/bpf/classic_vs_extended.rst
new file mode 100644
index 000000000000..2f81a81f5267
--- /dev/null
+++ b/Documentation/bpf/classic_vs_extended.rst
@@ -0,0 +1,376 @@
+
+===================
+Classic BPF vs eBPF
+===================
+
+eBPF is designed to be JITed with one to one mapping, which can also open up
+the possibility for GCC/LLVM compilers to generate optimized eBPF code through
+an eBPF backend that performs almost as fast as natively compiled code.
+
+Some core changes of the eBPF format from classic BPF:
+
+- Number of registers increase from 2 to 10:
+
+  The old format had two registers A and X, and a hidden frame pointer. The
+  new layout extends this to be 10 internal registers and a read-only frame
+  pointer. Since 64-bit CPUs are passing arguments to functions via registers
+  the number of args from eBPF program to in-kernel function is restricted
+  to 5 and one register is used to accept return value from an in-kernel
+  function. Natively, x86_64 passes first 6 arguments in registers, aarch64/
+  sparcv9/mips64 have 7 - 8 registers for arguments; x86_64 has 6 callee saved
+  registers, and aarch64/sparcv9/mips64 have 11 or more callee saved registers.
+
+  Thus, all eBPF registers map one to one to HW registers on x86_64, aarch64,
+  etc, and eBPF calling convention maps directly to ABIs used by the kernel on
+  64-bit architectures.
+
+  On 32-bit architectures JIT may map programs that use only 32-bit arithmetic
+  and may let more complex programs to be interpreted.
+
+  R0 - R5 are scratch registers and eBPF program needs spill/fill them if
+  necessary across calls. Note that there is only one eBPF program (== one
+  eBPF main routine) and it cannot call other eBPF functions, it can only
+  call predefined in-kernel functions, though.
+
+- Register width increases from 32-bit to 64-bit:
+
+  Still, the semantics of the original 32-bit ALU operations are preserved
+  via 32-bit subregisters. All eBPF registers are 64-bit with 32-bit lower
+  subregisters that zero-extend into 64-bit if they are being written to.
+  That behavior maps directly to x86_64 and arm64 subregister definition, but
+  makes other JITs more difficult.
+
+  32-bit architectures run 64-bit eBPF programs via interpreter.
+  Their JITs may convert BPF programs that only use 32-bit subregisters into
+  native instruction set and let the rest being interpreted.
+
+  Operation is 64-bit, because on 64-bit architectures, pointers are also
+  64-bit wide, and we want to pass 64-bit values in/out of kernel functions,
+  so 32-bit eBPF registers would otherwise require to define register-pair
+  ABI, thus, there won't be able to use a direct eBPF register to HW register
+  mapping and JIT would need to do combine/split/move operations for every
+  register in and out of the function, which is complex, bug prone and slow.
+  Another reason is the use of atomic 64-bit counters.
+
+- Conditional jt/jf targets replaced with jt/fall-through:
+
+  While the original design has constructs such as ``if (cond) jump_true;
+  else jump_false;``, they are being replaced into alternative constructs like
+  ``if (cond) jump_true; /* else fall-through */``.
+
+- Introduces bpf_call insn and register passing convention for zero overhead
+  calls from/to other kernel functions:
+
+  Before an in-kernel function call, the eBPF program needs to
+  place function arguments into R1 to R5 registers to satisfy calling
+  convention, then the interpreter will take them from registers and pass
+  to in-kernel function. If R1 - R5 registers are mapped to CPU registers
+  that are used for argument passing on given architecture, the JIT compiler
+  doesn't need to emit extra moves. Function arguments will be in the correct
+  registers and BPF_CALL instruction will be JITed as single 'call' HW
+  instruction. This calling convention was picked to cover common call
+  situations without performance penalty.
+
+  After an in-kernel function call, R1 - R5 are reset to unreadable and R0 has
+  a return value of the function. Since R6 - R9 are callee saved, their state
+  is preserved across the call.
+
+  For example, consider three C functions::
+
+    u64 f1() { return (*_f2)(1); }
+    u64 f2(u64 a) { return f3(a + 1, a); }
+    u64 f3(u64 a, u64 b) { return a - b; }
+
+  GCC can compile f1, f3 into x86_64::
+
+    f1:
+	movl $1, %edi
+	movq _f2(%rip), %rax
+	jmp  *%rax
+    f3:
+	movq %rdi, %rax
+	subq %rsi, %rax
+	ret
+
+  Function f2 in eBPF may look like::
+
+    f2:
+	bpf_mov R2, R1
+	bpf_add R1, 1
+	bpf_call f3
+	bpf_exit
+
+  If f2 is JITed and the pointer stored to ``_f2``. The calls f1 -> f2 -> f3 and
+  returns will be seamless. Without JIT, __bpf_prog_run() interpreter needs to
+  be used to call into f2.
+
+  For practical reasons all eBPF programs have only one argument 'ctx' which is
+  already placed into R1 (e.g. on __bpf_prog_run() startup) and the programs
+  can call kernel functions with up to 5 arguments. Calls with 6 or more arguments
+  are currently not supported, but these restrictions can be lifted if necessary
+  in the future.
+
+  On 64-bit architectures all register map to HW registers one to one. For
+  example, x86_64 JIT compiler can map them as ...
+
+  ::
+
+    R0 - rax
+    R1 - rdi
+    R2 - rsi
+    R3 - rdx
+    R4 - rcx
+    R5 - r8
+    R6 - rbx
+    R7 - r13
+    R8 - r14
+    R9 - r15
+    R10 - rbp
+
+  ... since x86_64 ABI mandates rdi, rsi, rdx, rcx, r8, r9 for argument passing
+  and rbx, r12 - r15 are callee saved.
+
+  Then the following eBPF pseudo-program::
+
+    bpf_mov R6, R1 /* save ctx */
+    bpf_mov R2, 2
+    bpf_mov R3, 3
+    bpf_mov R4, 4
+    bpf_mov R5, 5
+    bpf_call foo
+    bpf_mov R7, R0 /* save foo() return value */
+    bpf_mov R1, R6 /* restore ctx for next call */
+    bpf_mov R2, 6
+    bpf_mov R3, 7
+    bpf_mov R4, 8
+    bpf_mov R5, 9
+    bpf_call bar
+    bpf_add R0, R7
+    bpf_exit
+
+  After JIT to x86_64 may look like::
+
+    push %rbp
+    mov %rsp,%rbp
+    sub $0x228,%rsp
+    mov %rbx,-0x228(%rbp)
+    mov %r13,-0x220(%rbp)
+    mov %rdi,%rbx
+    mov $0x2,%esi
+    mov $0x3,%edx
+    mov $0x4,%ecx
+    mov $0x5,%r8d
+    callq foo
+    mov %rax,%r13
+    mov %rbx,%rdi
+    mov $0x6,%esi
+    mov $0x7,%edx
+    mov $0x8,%ecx
+    mov $0x9,%r8d
+    callq bar
+    add %r13,%rax
+    mov -0x228(%rbp),%rbx
+    mov -0x220(%rbp),%r13
+    leaveq
+    retq
+
+  Which is in this example equivalent in C to::
+
+    u64 bpf_filter(u64 ctx)
+    {
+	return foo(ctx, 2, 3, 4, 5) + bar(ctx, 6, 7, 8, 9);
+    }
+
+  In-kernel functions foo() and bar() with prototype: u64 (*)(u64 arg1, u64
+  arg2, u64 arg3, u64 arg4, u64 arg5); will receive arguments in proper
+  registers and place their return value into ``%rax`` which is R0 in eBPF.
+  Prologue and epilogue are emitted by JIT and are implicit in the
+  interpreter. R0-R5 are scratch registers, so eBPF program needs to preserve
+  them across the calls as defined by calling convention.
+
+  For example the following program is invalid::
+
+    bpf_mov R1, 1
+    bpf_call foo
+    bpf_mov R0, R1
+    bpf_exit
+
+  After the call the registers R1-R5 contain junk values and cannot be read.
+  An in-kernel verifier.rst is used to validate eBPF programs.
+
+Also in the new design, eBPF is limited to 4096 insns, which means that any
+program will terminate quickly and will only call a fixed number of kernel
+functions. Original BPF and eBPF are two operand instructions,
+which helps to do one-to-one mapping between eBPF insn and x86 insn during JIT.
+
+The input context pointer for invoking the interpreter function is generic,
+its content is defined by a specific use case. For seccomp register R1 points
+to seccomp_data, for converted BPF filters R1 points to a skb.
+
+A program, that is translated internally consists of the following elements::
+
+  op:16, jt:8, jf:8, k:32    ==>    op:8, dst_reg:4, src_reg:4, off:16, imm:32
+
+So far 87 eBPF instructions were implemented. 8-bit 'op' opcode field
+has room for new instructions. Some of them may use 16/24/32 byte encoding. New
+instructions must be multiple of 8 bytes to preserve backward compatibility.
+
+eBPF is a general purpose RISC instruction set. Not every register and
+every instruction are used during translation from original BPF to eBPF.
+For example, socket filters are not using ``exclusive add`` instruction, but
+tracing filters may do to maintain counters of events, for example. Register R9
+is not used by socket filters either, but more complex filters may be running
+out of registers and would have to resort to spill/fill to stack.
+
+eBPF can be used as a generic assembler for last step performance
+optimizations, socket filters and seccomp are using it as assembler. Tracing
+filters may use it as assembler to generate code from kernel. In kernel usage
+may not be bounded by security considerations, since generated eBPF code
+may be optimizing internal code path and not being exposed to the user space.
+Safety of eBPF can come from the verifier.rst. In such use cases as
+described, it may be used as safe instruction set.
+
+Just like the original BPF, eBPF runs within a controlled environment,
+is deterministic and the kernel can easily prove that. The safety of the program
+can be determined in two steps: first step does depth-first-search to disallow
+loops and other CFG validation; second step starts from the first insn and
+descends all possible paths. It simulates execution of every insn and observes
+the state change of registers and stack.
+
+opcode encoding
+===============
+
+eBPF is reusing most of the opcode encoding from classic to simplify conversion
+of classic BPF to eBPF.
+
+For arithmetic and jump instructions the 8-bit 'code' field is divided into three
+parts::
+
+  +----------------+--------+--------------------+
+  |   4 bits       |  1 bit |   3 bits           |
+  | operation code | source | instruction class  |
+  +----------------+--------+--------------------+
+  (MSB)                                      (LSB)
+
+Three LSB bits store instruction class which is one of:
+
+  ===================     ===============
+  Classic BPF classes     eBPF classes
+  ===================     ===============
+  BPF_LD    0x00          BPF_LD    0x00
+  BPF_LDX   0x01          BPF_LDX   0x01
+  BPF_ST    0x02          BPF_ST    0x02
+  BPF_STX   0x03          BPF_STX   0x03
+  BPF_ALU   0x04          BPF_ALU   0x04
+  BPF_JMP   0x05          BPF_JMP   0x05
+  BPF_RET   0x06          BPF_JMP32 0x06
+  BPF_MISC  0x07          BPF_ALU64 0x07
+  ===================     ===============
+
+The 4th bit encodes the source operand ...
+
+    ::
+
+	BPF_K     0x00
+	BPF_X     0x08
+
+ * in classic BPF, this means::
+
+	BPF_SRC(code) == BPF_X - use register X as source operand
+	BPF_SRC(code) == BPF_K - use 32-bit immediate as source operand
+
+ * in eBPF, this means::
+
+	BPF_SRC(code) == BPF_X - use 'src_reg' register as source operand
+	BPF_SRC(code) == BPF_K - use 32-bit immediate as source operand
+
+... and four MSB bits store operation code.
+
+If BPF_CLASS(code) == BPF_ALU or BPF_ALU64 [ in eBPF ], BPF_OP(code) is one of::
+
+  BPF_ADD   0x00
+  BPF_SUB   0x10
+  BPF_MUL   0x20
+  BPF_DIV   0x30
+  BPF_OR    0x40
+  BPF_AND   0x50
+  BPF_LSH   0x60
+  BPF_RSH   0x70
+  BPF_NEG   0x80
+  BPF_MOD   0x90
+  BPF_XOR   0xa0
+  BPF_MOV   0xb0  /* eBPF only: mov reg to reg */
+  BPF_ARSH  0xc0  /* eBPF only: sign extending shift right */
+  BPF_END   0xd0  /* eBPF only: endianness conversion */
+
+If BPF_CLASS(code) == BPF_JMP or BPF_JMP32 [ in eBPF ], BPF_OP(code) is one of::
+
+  BPF_JA    0x00  /* BPF_JMP only */
+  BPF_JEQ   0x10
+  BPF_JGT   0x20
+  BPF_JGE   0x30
+  BPF_JSET  0x40
+  BPF_JNE   0x50  /* eBPF only: jump != */
+  BPF_JSGT  0x60  /* eBPF only: signed '>' */
+  BPF_JSGE  0x70  /* eBPF only: signed '>=' */
+  BPF_CALL  0x80  /* eBPF BPF_JMP only: function call */
+  BPF_EXIT  0x90  /* eBPF BPF_JMP only: function return */
+  BPF_JLT   0xa0  /* eBPF only: unsigned '<' */
+  BPF_JLE   0xb0  /* eBPF only: unsigned '<=' */
+  BPF_JSLT  0xc0  /* eBPF only: signed '<' */
+  BPF_JSLE  0xd0  /* eBPF only: signed '<=' */
+
+So BPF_ADD | BPF_X | BPF_ALU means 32-bit addition in both classic BPF
+and eBPF. There are only two registers in classic BPF, so it means A += X.
+In eBPF it means dst_reg = (u32) dst_reg + (u32) src_reg; similarly,
+BPF_XOR | BPF_K | BPF_ALU means A ^= imm32 in classic BPF and analogous
+src_reg = (u32) src_reg ^ (u32) imm32 in eBPF.
+
+Classic BPF is using BPF_MISC class to represent A = X and X = A moves.
+eBPF is using BPF_MOV | BPF_X | BPF_ALU code instead. Since there are no
+BPF_MISC operations in eBPF, the class 7 is used as BPF_ALU64 to mean
+exactly the same operations as BPF_ALU, but with 64-bit wide operands
+instead. So BPF_ADD | BPF_X | BPF_ALU64 means 64-bit addition, i.e.:
+dst_reg = dst_reg + src_reg
+
+Classic BPF wastes the whole BPF_RET class to represent a single ``ret``
+operation. Classic BPF_RET | BPF_K means copy imm32 into return register
+and perform function exit. eBPF is modeled to match CPU, so BPF_JMP | BPF_EXIT
+in eBPF means function exit only. The eBPF program needs to store return
+value into register R0 before doing a BPF_EXIT. Class 6 in eBPF is used as
+BPF_JMP32 to mean exactly the same operations as BPF_JMP, but with 32-bit wide
+operands for the comparisons instead.
+
+For load and store instructions the 8-bit 'code' field is divided as::
+
+  +--------+--------+-------------------+
+  | 3 bits | 2 bits |   3 bits          |
+  |  mode  |  size  | instruction class |
+  +--------+--------+-------------------+
+  (MSB)                             (LSB)
+
+Size modifier is one of ...
+
+::
+
+  BPF_W   0x00    /* word */
+  BPF_H   0x08    /* half word */
+  BPF_B   0x10    /* byte */
+  BPF_DW  0x18    /* eBPF only, double word */
+
+... which encodes size of load/store operation::
+
+ B  - 1 byte
+ H  - 2 byte
+ W  - 4 byte
+ DW - 8 byte (eBPF only)
+
+Mode modifier is one of::
+
+  BPF_IMM     0x00  /* used for 32-bit mov in classic BPF and 64-bit in eBPF */
+  BPF_ABS     0x20
+  BPF_IND     0x40
+  BPF_MEM     0x60
+  BPF_LEN     0x80  /* classic BPF only, reserved in eBPF */
+  BPF_MSH     0xa0  /* classic BPF only, reserved in eBPF */
+  BPF_ATOMIC  0xc0  /* eBPF only, atomic operations */
diff --git a/Documentation/bpf/cpumasks.rst b/Documentation/bpf/cpumasks.rst
new file mode 100644
index 000000000000..41efd8874eeb
--- /dev/null
+++ b/Documentation/bpf/cpumasks.rst
@@ -0,0 +1,383 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _cpumasks-header-label:
+
+==================
+BPF cpumask kfuncs
+==================
+
+1. Introduction
+===============
+
+``struct cpumask`` is a bitmap data structure in the kernel whose indices
+reflect the CPUs on the system. Commonly, cpumasks are used to track which CPUs
+a task is affinitized to, but they can also be used to e.g. track which cores
+are associated with a scheduling domain, which cores on a machine are idle,
+etc.
+
+BPF provides programs with a set of :ref:`kfuncs-header-label` that can be
+used to allocate, mutate, query, and free cpumasks.
+
+2. BPF cpumask objects
+======================
+
+There are two different types of cpumasks that can be used by BPF programs.
+
+2.1 ``struct bpf_cpumask *``
+----------------------------
+
+``struct bpf_cpumask *`` is a cpumask that is allocated by BPF, on behalf of a
+BPF program, and whose lifecycle is entirely controlled by BPF. These cpumasks
+are RCU-protected, can be mutated, can be used as kptrs, and can be safely cast
+to a ``struct cpumask *``.
+
+2.1.1 ``struct bpf_cpumask *`` lifecycle
+----------------------------------------
+
+A ``struct bpf_cpumask *`` is allocated, acquired, and released, using the
+following functions:
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+  :identifiers: bpf_cpumask_create
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+  :identifiers: bpf_cpumask_acquire
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+  :identifiers: bpf_cpumask_release
+
+For example:
+
+.. code-block:: c
+
+        struct cpumask_map_value {
+                struct bpf_cpumask __kptr * cpumask;
+        };
+
+        struct array_map {
+                __uint(type, BPF_MAP_TYPE_ARRAY);
+                __type(key, int);
+                __type(value, struct cpumask_map_value);
+                __uint(max_entries, 65536);
+        } cpumask_map SEC(".maps");
+
+        static int cpumask_map_insert(struct bpf_cpumask *mask, u32 pid)
+        {
+                struct cpumask_map_value local, *v;
+                long status;
+                struct bpf_cpumask *old;
+                u32 key = pid;
+
+                local.cpumask = NULL;
+                status = bpf_map_update_elem(&cpumask_map, &key, &local, 0);
+                if (status) {
+                        bpf_cpumask_release(mask);
+                        return status;
+                }
+
+                v = bpf_map_lookup_elem(&cpumask_map, &key);
+                if (!v) {
+                        bpf_cpumask_release(mask);
+                        return -ENOENT;
+                }
+
+                old = bpf_kptr_xchg(&v->cpumask, mask);
+                if (old)
+                        bpf_cpumask_release(old);
+
+                return 0;
+        }
+
+        /**
+         * A sample tracepoint showing how a task's cpumask can be queried and
+         * recorded as a kptr.
+         */
+        SEC("tp_btf/task_newtask")
+        int BPF_PROG(record_task_cpumask, struct task_struct *task, u64 clone_flags)
+        {
+                struct bpf_cpumask *cpumask;
+                int ret;
+
+                cpumask = bpf_cpumask_create();
+                if (!cpumask)
+                        return -ENOMEM;
+
+                if (!bpf_cpumask_full(task->cpus_ptr))
+                        bpf_printk("task %s has CPU affinity", task->comm);
+
+                bpf_cpumask_copy(cpumask, task->cpus_ptr);
+                return cpumask_map_insert(cpumask, task->pid);
+        }
+
+----
+
+2.1.1 ``struct bpf_cpumask *`` as kptrs
+---------------------------------------
+
+As mentioned and illustrated above, these ``struct bpf_cpumask *`` objects can
+also be stored in a map and used as kptrs. If a ``struct bpf_cpumask *`` is in
+a map, the reference can be removed from the map with bpf_kptr_xchg(), or
+opportunistically acquired using RCU:
+
+.. code-block:: c
+
+	/* struct containing the struct bpf_cpumask kptr which is stored in the map. */
+	struct cpumasks_kfunc_map_value {
+		struct bpf_cpumask __kptr * bpf_cpumask;
+	};
+
+	/* The map containing struct cpumasks_kfunc_map_value entries. */
+	struct {
+		__uint(type, BPF_MAP_TYPE_ARRAY);
+		__type(key, int);
+		__type(value, struct cpumasks_kfunc_map_value);
+		__uint(max_entries, 1);
+	} cpumasks_kfunc_map SEC(".maps");
+
+	/* ... */
+
+	/**
+	 * A simple example tracepoint program showing how a
+	 * struct bpf_cpumask * kptr that is stored in a map can
+	 * be passed to kfuncs using RCU protection.
+	 */
+	SEC("tp_btf/cgroup_mkdir")
+	int BPF_PROG(cgrp_ancestor_example, struct cgroup *cgrp, const char *path)
+	{
+		struct bpf_cpumask *kptr;
+		struct cpumasks_kfunc_map_value *v;
+		u32 key = 0;
+
+		/* Assume a bpf_cpumask * kptr was previously stored in the map. */
+		v = bpf_map_lookup_elem(&cpumasks_kfunc_map, &key);
+		if (!v)
+			return -ENOENT;
+
+		bpf_rcu_read_lock();
+		/* Acquire a reference to the bpf_cpumask * kptr that's already stored in the map. */
+		kptr = v->cpumask;
+		if (!kptr) {
+			/* If no bpf_cpumask was present in the map, it's because
+			 * we're racing with another CPU that removed it with
+			 * bpf_kptr_xchg() between the bpf_map_lookup_elem()
+			 * above, and our load of the pointer from the map.
+			 */
+			bpf_rcu_read_unlock();
+			return -EBUSY;
+		}
+
+		bpf_cpumask_setall(kptr);
+		bpf_rcu_read_unlock();
+
+		return 0;
+	}
+
+----
+
+2.2 ``struct cpumask``
+----------------------
+
+``struct cpumask`` is the object that actually contains the cpumask bitmap
+being queried, mutated, etc. A ``struct bpf_cpumask`` wraps a ``struct
+cpumask``, which is why it's safe to cast it as such (note however that it is
+**not** safe to cast a ``struct cpumask *`` to a ``struct bpf_cpumask *``, and
+the verifier will reject any program that tries to do so).
+
+As we'll see below, any kfunc that mutates its cpumask argument will take a
+``struct bpf_cpumask *`` as that argument. Any argument that simply queries the
+cpumask will instead take a ``struct cpumask *``.
+
+3. cpumask kfuncs
+=================
+
+Above, we described the kfuncs that can be used to allocate, acquire, release,
+etc a ``struct bpf_cpumask *``. This section of the document will describe the
+kfuncs for mutating and querying cpumasks.
+
+3.1 Mutating cpumasks
+---------------------
+
+Some cpumask kfuncs are "read-only" in that they don't mutate any of their
+arguments, whereas others mutate at least one argument (which means that the
+argument must be a ``struct bpf_cpumask *``, as described above).
+
+This section will describe all of the cpumask kfuncs which mutate at least one
+argument. :ref:`cpumasks-querying-label` below describes the read-only kfuncs.
+
+3.1.1 Setting and clearing CPUs
+-------------------------------
+
+bpf_cpumask_set_cpu() and bpf_cpumask_clear_cpu() can be used to set and clear
+a CPU in a ``struct bpf_cpumask`` respectively:
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+   :identifiers: bpf_cpumask_set_cpu bpf_cpumask_clear_cpu
+
+These kfuncs are pretty straightforward, and can be used, for example, as
+follows:
+
+.. code-block:: c
+
+        /**
+         * A sample tracepoint showing how a cpumask can be queried.
+         */
+        SEC("tp_btf/task_newtask")
+        int BPF_PROG(test_set_clear_cpu, struct task_struct *task, u64 clone_flags)
+        {
+                struct bpf_cpumask *cpumask;
+
+                cpumask = bpf_cpumask_create();
+                if (!cpumask)
+                        return -ENOMEM;
+
+                bpf_cpumask_set_cpu(0, cpumask);
+                if (!bpf_cpumask_test_cpu(0, cast(cpumask)))
+                        /* Should never happen. */
+                        goto release_exit;
+
+                bpf_cpumask_clear_cpu(0, cpumask);
+                if (bpf_cpumask_test_cpu(0, cast(cpumask)))
+                        /* Should never happen. */
+                        goto release_exit;
+
+                /* struct cpumask * pointers such as task->cpus_ptr can also be queried. */
+                if (bpf_cpumask_test_cpu(0, task->cpus_ptr))
+                        bpf_printk("task %s can use CPU %d", task->comm, 0);
+
+        release_exit:
+                bpf_cpumask_release(cpumask);
+                return 0;
+        }
+
+----
+
+bpf_cpumask_test_and_set_cpu() and bpf_cpumask_test_and_clear_cpu() are
+complementary kfuncs that allow callers to atomically test and set (or clear)
+CPUs:
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+   :identifiers: bpf_cpumask_test_and_set_cpu bpf_cpumask_test_and_clear_cpu
+
+----
+
+We can also set and clear entire ``struct bpf_cpumask *`` objects in one
+operation using bpf_cpumask_setall() and bpf_cpumask_clear():
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+   :identifiers: bpf_cpumask_setall bpf_cpumask_clear
+
+3.1.2 Operations between cpumasks
+---------------------------------
+
+In addition to setting and clearing individual CPUs in a single cpumask,
+callers can also perform bitwise operations between multiple cpumasks using
+bpf_cpumask_and(), bpf_cpumask_or(), and bpf_cpumask_xor():
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+   :identifiers: bpf_cpumask_and bpf_cpumask_or bpf_cpumask_xor
+
+The following is an example of how they may be used. Note that some of the
+kfuncs shown in this example will be covered in more detail below.
+
+.. code-block:: c
+
+        /**
+         * A sample tracepoint showing how a cpumask can be mutated using
+           bitwise operators (and queried).
+         */
+        SEC("tp_btf/task_newtask")
+        int BPF_PROG(test_and_or_xor, struct task_struct *task, u64 clone_flags)
+        {
+                struct bpf_cpumask *mask1, *mask2, *dst1, *dst2;
+
+                mask1 = bpf_cpumask_create();
+                if (!mask1)
+                        return -ENOMEM;
+
+                mask2 = bpf_cpumask_create();
+                if (!mask2) {
+                        bpf_cpumask_release(mask1);
+                        return -ENOMEM;
+                }
+
+                // ...Safely create the other two masks... */
+
+                bpf_cpumask_set_cpu(0, mask1);
+                bpf_cpumask_set_cpu(1, mask2);
+                bpf_cpumask_and(dst1, (const struct cpumask *)mask1, (const struct cpumask *)mask2);
+                if (!bpf_cpumask_empty((const struct cpumask *)dst1))
+                        /* Should never happen. */
+                        goto release_exit;
+
+                bpf_cpumask_or(dst1, (const struct cpumask *)mask1, (const struct cpumask *)mask2);
+                if (!bpf_cpumask_test_cpu(0, (const struct cpumask *)dst1))
+                        /* Should never happen. */
+                        goto release_exit;
+
+                if (!bpf_cpumask_test_cpu(1, (const struct cpumask *)dst1))
+                        /* Should never happen. */
+                        goto release_exit;
+
+                bpf_cpumask_xor(dst2, (const struct cpumask *)mask1, (const struct cpumask *)mask2);
+                if (!bpf_cpumask_equal((const struct cpumask *)dst1,
+                                       (const struct cpumask *)dst2))
+                        /* Should never happen. */
+                        goto release_exit;
+
+         release_exit:
+                bpf_cpumask_release(mask1);
+                bpf_cpumask_release(mask2);
+                bpf_cpumask_release(dst1);
+                bpf_cpumask_release(dst2);
+                return 0;
+        }
+
+----
+
+The contents of an entire cpumask may be copied to another using
+bpf_cpumask_copy():
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+   :identifiers: bpf_cpumask_copy
+
+----
+
+.. _cpumasks-querying-label:
+
+3.2 Querying cpumasks
+---------------------
+
+In addition to the above kfuncs, there is also a set of read-only kfuncs that
+can be used to query the contents of cpumasks.
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+   :identifiers: bpf_cpumask_first bpf_cpumask_first_zero bpf_cpumask_test_cpu
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+   :identifiers: bpf_cpumask_equal bpf_cpumask_intersects bpf_cpumask_subset
+                 bpf_cpumask_empty bpf_cpumask_full
+
+.. kernel-doc:: kernel/bpf/cpumask.c
+   :identifiers: bpf_cpumask_any bpf_cpumask_any_and
+
+----
+
+Some example usages of these querying kfuncs were shown above. We will not
+replicate those exmaples here. Note, however, that all of the aforementioned
+kfuncs are tested in `tools/testing/selftests/bpf/progs/cpumask_success.c`_, so
+please take a look there if you're looking for more examples of how they can be
+used.
+
+.. _tools/testing/selftests/bpf/progs/cpumask_success.c:
+   https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/testing/selftests/bpf/progs/cpumask_success.c
+
+
+4. Adding BPF cpumask kfuncs
+============================
+
+The set of supported BPF cpumask kfuncs are not (yet) a 1-1 match with the
+cpumask operations in include/linux/cpumask.h. Any of those cpumask operations
+could easily be encapsulated in a new kfunc if and when required. If you'd like
+to support a new cpumask operation, please feel free to submit a patch. If you
+do add a new cpumask kfunc, please document it here, and add any relevant
+selftest testcases to the cpumask selftest suite.
diff --git a/Documentation/bpf/faq.rst b/Documentation/bpf/faq.rst
new file mode 100644
index 000000000000..a622602ce9ad
--- /dev/null
+++ b/Documentation/bpf/faq.rst
@@ -0,0 +1,11 @@
+================================
+Frequently asked questions (FAQ)
+================================
+
+Two sets of Questions and Answers (Q&A) are maintained.
+
+.. toctree::
+   :maxdepth: 1
+
+   bpf_design_QA
+   bpf_devel_QA
diff --git a/Documentation/bpf/graph_ds_impl.rst b/Documentation/bpf/graph_ds_impl.rst
new file mode 100644
index 000000000000..61274622b71d
--- /dev/null
+++ b/Documentation/bpf/graph_ds_impl.rst
@@ -0,0 +1,267 @@
+=========================
+BPF Graph Data Structures
+=========================
+
+This document describes implementation details of new-style "graph" data
+structures (linked_list, rbtree), with particular focus on the verifier's
+implementation of semantics specific to those data structures.
+
+Although no specific verifier code is referred to in this document, the document
+assumes that the reader has general knowledge of BPF verifier internals, BPF
+maps, and BPF program writing.
+
+Note that the intent of this document is to describe the current state of
+these graph data structures. **No guarantees** of stability for either
+semantics or APIs are made or implied here.
+
+.. contents::
+    :local:
+    :depth: 2
+
+Introduction
+------------
+
+The BPF map API has historically been the main way to expose data structures
+of various types for use within BPF programs. Some data structures fit naturally
+with the map API (HASH, ARRAY), others less so. Consequentially, programs
+interacting with the latter group of data structures can be hard to parse
+for kernel programmers without previous BPF experience.
+
+Luckily, some restrictions which necessitated the use of BPF map semantics are
+no longer relevant. With the introduction of kfuncs, kptrs, and the any-context
+BPF allocator, it is now possible to implement BPF data structures whose API
+and semantics more closely match those exposed to the rest of the kernel.
+
+Two such data structures - linked_list and rbtree - have many verification
+details in common. Because both have "root"s ("head" for linked_list) and
+"node"s, the verifier code and this document refer to common functionality
+as "graph_api", "graph_root", "graph_node", etc.
+
+Unless otherwise stated, examples and semantics below apply to both graph data
+structures.
+
+Unstable API
+------------
+
+Data structures implemented using the BPF map API have historically used BPF
+helper functions - either standard map API helpers like ``bpf_map_update_elem``
+or map-specific helpers. The new-style graph data structures instead use kfuncs
+to define their manipulation helpers. Because there are no stability guarantees
+for kfuncs, the API and semantics for these data structures can be evolved in
+a way that breaks backwards compatibility if necessary.
+
+Root and node types for the new data structures are opaquely defined in the
+``uapi/linux/bpf.h`` header.
+
+Locking
+-------
+
+The new-style data structures are intrusive and are defined similarly to their
+vanilla kernel counterparts:
+
+.. code-block:: c
+
+        struct node_data {
+          long key;
+          long data;
+          struct bpf_rb_node node;
+        };
+
+        struct bpf_spin_lock glock;
+        struct bpf_rb_root groot __contains(node_data, node);
+
+The "root" type for both linked_list and rbtree expects to be in a map_value
+which also contains a ``bpf_spin_lock`` - in the above example both global
+variables are placed in a single-value arraymap. The verifier considers this
+spin_lock to be associated with the ``bpf_rb_root`` by virtue of both being in
+the same map_value and will enforce that the correct lock is held when
+verifying BPF programs that manipulate the tree. Since this lock checking
+happens at verification time, there is no runtime penalty.
+
+Non-owning references
+---------------------
+
+**Motivation**
+
+Consider the following BPF code:
+
+.. code-block:: c
+
+        struct node_data *n = bpf_obj_new(typeof(*n)); /* ACQUIRED */
+
+        bpf_spin_lock(&lock);
+
+        bpf_rbtree_add(&tree, n); /* PASSED */
+
+        bpf_spin_unlock(&lock);
+
+From the verifier's perspective, the pointer ``n`` returned from ``bpf_obj_new``
+has type ``PTR_TO_BTF_ID | MEM_ALLOC``, with a ``btf_id`` of
+``struct node_data`` and a nonzero ``ref_obj_id``. Because it holds ``n``, the
+program has ownership of the pointee's (object pointed to by ``n``) lifetime.
+The BPF program must pass off ownership before exiting - either via
+``bpf_obj_drop``, which ``free``'s the object, or by adding it to ``tree`` with
+``bpf_rbtree_add``.
+
+(``ACQUIRED`` and ``PASSED`` comments in the example denote statements where
+"ownership is acquired" and "ownership is passed", respectively)
+
+What should the verifier do with ``n`` after ownership is passed off? If the
+object was ``free``'d with ``bpf_obj_drop`` the answer is obvious: the verifier
+should reject programs which attempt to access ``n`` after ``bpf_obj_drop`` as
+the object is no longer valid. The underlying memory may have been reused for
+some other allocation, unmapped, etc.
+
+When ownership is passed to ``tree`` via ``bpf_rbtree_add`` the answer is less
+obvious. The verifier could enforce the same semantics as for ``bpf_obj_drop``,
+but that would result in programs with useful, common coding patterns being
+rejected, e.g.:
+
+.. code-block:: c
+
+        int x;
+        struct node_data *n = bpf_obj_new(typeof(*n)); /* ACQUIRED */
+
+        bpf_spin_lock(&lock);
+
+        bpf_rbtree_add(&tree, n); /* PASSED */
+        x = n->data;
+        n->data = 42;
+
+        bpf_spin_unlock(&lock);
+
+Both the read from and write to ``n->data`` would be rejected. The verifier
+can do better, though, by taking advantage of two details:
+
+  * Graph data structure APIs can only be used when the ``bpf_spin_lock``
+    associated with the graph root is held
+
+  * Both graph data structures have pointer stability
+
+     * Because graph nodes are allocated with ``bpf_obj_new`` and
+       adding / removing from the root involves fiddling with the
+       ``bpf_{list,rb}_node`` field of the node struct, a graph node will
+       remain at the same address after either operation.
+
+Because the associated ``bpf_spin_lock`` must be held by any program adding
+or removing, if we're in the critical section bounded by that lock, we know
+that no other program can add or remove until the end of the critical section.
+This combined with pointer stability means that, until the critical section
+ends, we can safely access the graph node through ``n`` even after it was used
+to pass ownership.
+
+The verifier considers such a reference a *non-owning reference*. The ref
+returned by ``bpf_obj_new`` is accordingly considered an *owning reference*.
+Both terms currently only have meaning in the context of graph nodes and API.
+
+**Details**
+
+Let's enumerate the properties of both types of references.
+
+*owning reference*
+
+  * This reference controls the lifetime of the pointee
+
+  * Ownership of pointee must be 'released' by passing it to some graph API
+    kfunc, or via ``bpf_obj_drop``, which ``free``'s the pointee
+
+    * If not released before program ends, verifier considers program invalid
+
+  * Access to the pointee's memory will not page fault
+
+*non-owning reference*
+
+  * This reference does not own the pointee
+
+     * It cannot be used to add the graph node to a graph root, nor ``free``'d via
+       ``bpf_obj_drop``
+
+  * No explicit control of lifetime, but can infer valid lifetime based on
+    non-owning ref existence (see explanation below)
+
+  * Access to the pointee's memory will not page fault
+
+From verifier's perspective non-owning references can only exist
+between spin_lock and spin_unlock. Why? After spin_unlock another program
+can do arbitrary operations on the data structure like removing and ``free``-ing
+via bpf_obj_drop. A non-owning ref to some chunk of memory that was remove'd,
+``free``'d, and reused via bpf_obj_new would point to an entirely different thing.
+Or the memory could go away.
+
+To prevent this logic violation all non-owning references are invalidated by the
+verifier after a critical section ends. This is necessary to ensure the "will
+not page fault" property of non-owning references. So if the verifier hasn't
+invalidated a non-owning ref, accessing it will not page fault.
+
+Currently ``bpf_obj_drop`` is not allowed in the critical section, so
+if there's a valid non-owning ref, we must be in a critical section, and can
+conclude that the ref's memory hasn't been dropped-and- ``free``'d or
+dropped-and-reused.
+
+Any reference to a node that is in an rbtree _must_ be non-owning, since
+the tree has control of the pointee's lifetime. Similarly, any ref to a node
+that isn't in rbtree _must_ be owning. This results in a nice property:
+graph API add / remove implementations don't need to check if a node
+has already been added (or already removed), as the ownership model
+allows the verifier to prevent such a state from being valid by simply checking
+types.
+
+However, pointer aliasing poses an issue for the above "nice property".
+Consider the following example:
+
+.. code-block:: c
+
+        struct node_data *n, *m, *o, *p;
+        n = bpf_obj_new(typeof(*n));     /* 1 */
+
+        bpf_spin_lock(&lock);
+
+        bpf_rbtree_add(&tree, n);        /* 2 */
+        m = bpf_rbtree_first(&tree);     /* 3 */
+
+        o = bpf_rbtree_remove(&tree, n); /* 4 */
+        p = bpf_rbtree_remove(&tree, m); /* 5 */
+
+        bpf_spin_unlock(&lock);
+
+        bpf_obj_drop(o);
+        bpf_obj_drop(p); /* 6 */
+
+Assume the tree is empty before this program runs. If we track verifier state
+changes here using numbers in above comments:
+
+  1) n is an owning reference
+
+  2) n is a non-owning reference, it's been added to the tree
+
+  3) n and m are non-owning references, they both point to the same node
+
+  4) o is an owning reference, n and m non-owning, all point to same node
+
+  5) o and p are owning, n and m non-owning, all point to the same node
+
+  6) a double-free has occurred, since o and p point to same node and o was
+     ``free``'d in previous statement
+
+States 4 and 5 violate our "nice property", as there are non-owning refs to
+a node which is not in an rbtree. Statement 5 will try to remove a node which
+has already been removed as a result of this violation. State 6 is a dangerous
+double-free.
+
+At a minimum we should prevent state 6 from being possible. If we can't also
+prevent state 5 then we must abandon our "nice property" and check whether a
+node has already been removed at runtime.
+
+We prevent both by generalizing the "invalidate non-owning references" behavior
+of ``bpf_spin_unlock`` and doing similar invalidation after
+``bpf_rbtree_remove``. The logic here being that any graph API kfunc which:
+
+  * takes an arbitrary node argument
+
+  * removes it from the data structure
+
+  * returns an owning reference to the removed node
+
+May result in a state where some other non-owning reference points to the same
+node. So ``remove``-type kfuncs must be considered a non-owning reference
+invalidation point as well.
diff --git a/Documentation/bpf/helpers.rst b/Documentation/bpf/helpers.rst
new file mode 100644
index 000000000000..c4ee0cc20dec
--- /dev/null
+++ b/Documentation/bpf/helpers.rst
@@ -0,0 +1,7 @@
+Helper functions
+================
+
+* `bpf-helpers(7)`_ maintains a list of helpers available to eBPF programs.
+
+.. Links
+.. _bpf-helpers(7): https://man7.org/linux/man-pages/man7/bpf-helpers.7.html
+\ No newline at end of file
diff --git a/Documentation/bpf/index.rst b/Documentation/bpf/index.rst
index 1ceb5d704a97..dbb39e8f9889 100644
--- a/Documentation/bpf/index.rst
+++ b/Documentation/bpf/index.rst
@@ -5,95 +5,40 @@ BPF Documentation
 This directory contains documentation for the BPF (Berkeley Packet
 Filter) facility, with a focus on the extended BPF version (eBPF).
 
-This kernel side documentation is still work in progress. The main
-textual documentation is (for historical reasons) described in
-:ref:`networking-filter`, which describe both classical and extended
-BPF instruction-set.
+This kernel side documentation is still work in progress.
 The Cilium project also maintains a `BPF and XDP Reference Guide`_
 that goes into great technical depth about the BPF Architecture.
 
-libbpf
-======
-
-Documentation/bpf/libbpf/libbpf.rst is a userspace library for loading and interacting with bpf programs.
-
-BPF Type Format (BTF)
-=====================
-
 .. toctree::
    :maxdepth: 1
 
+   instruction-set
+   verifier
+   libbpf/index
    btf
-
-
-Frequently asked questions (FAQ)
-================================
-
-Two sets of Questions and Answers (Q&A) are maintained.
-
-.. toctree::
-   :maxdepth: 1
-
-   bpf_design_QA
-   bpf_devel_QA
-
-Syscall API
-===========
-
-The primary info for the bpf syscall is available in the `man-pages`_
-for `bpf(2)`_. For more information about the userspace API, see
-Documentation/userspace-api/ebpf/index.rst.
-
-Helper functions
-================
-
-* `bpf-helpers(7)`_ maintains a list of helpers available to eBPF programs.
-
-
-Program types
-=============
-
-.. toctree::
-   :maxdepth: 1
-
-   prog_cgroup_sockopt
-   prog_cgroup_sysctl
-   prog_flow_dissector
-   bpf_lsm
-   prog_sk_lookup
-
-
-Map types
-=========
-
-.. toctree::
-   :maxdepth: 1
-
-   map_cgroup_storage
-
-
-Testing and debugging BPF
-=========================
-
-.. toctree::
-   :maxdepth: 1
-
-   drgn
-   s390
-
-
-Other
-=====
-
-.. toctree::
-   :maxdepth: 1
-
-   ringbuf
-   llvm_reloc
+   faq
+   syscall_api
+   helpers
+   kfuncs
+   cpumasks
+   programs
+   maps
+   bpf_prog_run
+   classic_vs_extended.rst
+   bpf_iterators
+   bpf_licensing
+   test_debug
+   clang-notes
+   linux-notes
+   other
+   redirect
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
 
 .. Links:
-.. _networking-filter: ../networking/filter.rst
-.. _man-pages: https://www.kernel.org/doc/man-pages/
-.. _bpf(2): https://man7.org/linux/man-pages/man2/bpf.2.html
-.. _bpf-helpers(7): https://man7.org/linux/man-pages/man7/bpf-helpers.7.html
 .. _BPF and XDP Reference Guide: https://docs.cilium.io/en/latest/bpf/
diff --git a/Documentation/bpf/instruction-set.rst b/Documentation/bpf/instruction-set.rst
new file mode 100644
index 000000000000..492980ece1ab
--- /dev/null
+++ b/Documentation/bpf/instruction-set.rst
@@ -0,0 +1,475 @@
+.. contents::
+.. sectnum::
+
+========================================
+eBPF Instruction Set Specification, v1.0
+========================================
+
+This document specifies version 1.0 of the eBPF instruction set.
+
+Documentation conventions
+=========================
+
+For brevity, this document uses the type notion "u64", "u32", etc.
+to mean an unsigned integer whose width is the specified number of bits,
+and "s32", etc. to mean a signed integer of the specified number of bits.
+
+Registers and calling convention
+================================
+
+eBPF has 10 general purpose registers and a read-only frame pointer register,
+all of which are 64-bits wide.
+
+The eBPF calling convention is defined as:
+
+* R0: return value from function calls, and exit value for eBPF programs
+* R1 - R5: arguments for function calls
+* R6 - R9: callee saved registers that function calls will preserve
+* R10: read-only frame pointer to access stack
+
+R0 - R5 are scratch registers and eBPF programs needs to spill/fill them if
+necessary across calls.
+
+Instruction encoding
+====================
+
+eBPF has two instruction encodings:
+
+* the basic instruction encoding, which uses 64 bits to encode an instruction
+* the wide instruction encoding, which appends a second 64-bit immediate (i.e.,
+  constant) value after the basic instruction for a total of 128 bits.
+
+The fields conforming an encoded basic instruction are stored in the
+following order::
+
+  opcode:8 src_reg:4 dst_reg:4 offset:16 imm:32 // In little-endian BPF.
+  opcode:8 dst_reg:4 src_reg:4 offset:16 imm:32 // In big-endian BPF.
+
+**imm**
+  signed integer immediate value
+
+**offset**
+  signed integer offset used with pointer arithmetic
+
+**src_reg**
+  the source register number (0-10), except where otherwise specified
+  (`64-bit immediate instructions`_ reuse this field for other purposes)
+
+**dst_reg**
+  destination register number (0-10)
+
+**opcode**
+  operation to perform
+
+Note that the contents of multi-byte fields ('imm' and 'offset') are
+stored using big-endian byte ordering in big-endian BPF and
+little-endian byte ordering in little-endian BPF.
+
+For example::
+
+  opcode                  offset imm          assembly
+         src_reg dst_reg
+  07     0       1        00 00  44 33 22 11  r1 += 0x11223344 // little
+         dst_reg src_reg
+  07     1       0        00 00  11 22 33 44  r1 += 0x11223344 // big
+
+Note that most instructions do not use all of the fields.
+Unused fields shall be cleared to zero.
+
+As discussed below in `64-bit immediate instructions`_, a 64-bit immediate
+instruction uses a 64-bit immediate value that is constructed as follows.
+The 64 bits following the basic instruction contain a pseudo instruction
+using the same format but with opcode, dst_reg, src_reg, and offset all set to zero,
+and imm containing the high 32 bits of the immediate value.
+
+This is depicted in the following figure::
+
+        basic_instruction
+  .-----------------------------.
+  |                             |
+  code:8 regs:8 offset:16 imm:32 unused:32 imm:32
+                                 |              |
+                                 '--------------'
+                                pseudo instruction
+
+Thus the 64-bit immediate value is constructed as follows:
+
+  imm64 = (next_imm << 32) | imm
+
+where 'next_imm' refers to the imm value of the pseudo instruction
+following the basic instruction.  The unused bytes in the pseudo
+instruction are reserved and shall be cleared to zero.
+
+Instruction classes
+-------------------
+
+The three LSB bits of the 'opcode' field store the instruction class:
+
+=========  =====  ===============================  ===================================
+class      value  description                      reference
+=========  =====  ===============================  ===================================
+BPF_LD     0x00   non-standard load operations     `Load and store instructions`_
+BPF_LDX    0x01   load into register operations    `Load and store instructions`_
+BPF_ST     0x02   store from immediate operations  `Load and store instructions`_
+BPF_STX    0x03   store from register operations   `Load and store instructions`_
+BPF_ALU    0x04   32-bit arithmetic operations     `Arithmetic and jump instructions`_
+BPF_JMP    0x05   64-bit jump operations           `Arithmetic and jump instructions`_
+BPF_JMP32  0x06   32-bit jump operations           `Arithmetic and jump instructions`_
+BPF_ALU64  0x07   64-bit arithmetic operations     `Arithmetic and jump instructions`_
+=========  =====  ===============================  ===================================
+
+Arithmetic and jump instructions
+================================
+
+For arithmetic and jump instructions (``BPF_ALU``, ``BPF_ALU64``, ``BPF_JMP`` and
+``BPF_JMP32``), the 8-bit 'opcode' field is divided into three parts:
+
+==============  ======  =================
+4 bits (MSB)    1 bit   3 bits (LSB)
+==============  ======  =================
+code            source  instruction class
+==============  ======  =================
+
+**code**
+  the operation code, whose meaning varies by instruction class
+
+**source**
+  the source operand location, which unless otherwise specified is one of:
+
+  ======  =====  ==============================================
+  source  value  description
+  ======  =====  ==============================================
+  BPF_K   0x00   use 32-bit 'imm' value as source operand
+  BPF_X   0x08   use 'src_reg' register value as source operand
+  ======  =====  ==============================================
+
+**instruction class**
+  the instruction class (see `Instruction classes`_)
+
+Arithmetic instructions
+-----------------------
+
+``BPF_ALU`` uses 32-bit wide operands while ``BPF_ALU64`` uses 64-bit wide operands for
+otherwise identical operations.
+The 'code' field encodes the operation as below, where 'src' and 'dst' refer
+to the values of the source and destination registers, respectively.
+
+========  =====  ==========================================================
+code      value  description
+========  =====  ==========================================================
+BPF_ADD   0x00   dst += src
+BPF_SUB   0x10   dst -= src
+BPF_MUL   0x20   dst \*= src
+BPF_DIV   0x30   dst = (src != 0) ? (dst / src) : 0
+BPF_OR    0x40   dst \|= src
+BPF_AND   0x50   dst &= src
+BPF_LSH   0x60   dst <<= src
+BPF_RSH   0x70   dst >>= src
+BPF_NEG   0x80   dst = ~src
+BPF_MOD   0x90   dst = (src != 0) ? (dst % src) : dst
+BPF_XOR   0xa0   dst ^= src
+BPF_MOV   0xb0   dst = src
+BPF_ARSH  0xc0   sign extending shift right
+BPF_END   0xd0   byte swap operations (see `Byte swap instructions`_ below)
+========  =====  ==========================================================
+
+Underflow and overflow are allowed during arithmetic operations, meaning
+the 64-bit or 32-bit value will wrap. If eBPF program execution would
+result in division by zero, the destination register is instead set to zero.
+If execution would result in modulo by zero, for ``BPF_ALU64`` the value of
+the destination register is unchanged whereas for ``BPF_ALU`` the upper
+32 bits of the destination register are zeroed.
+
+``BPF_ADD | BPF_X | BPF_ALU`` means::
+
+  dst = (u32) ((u32) dst + (u32) src)
+
+where '(u32)' indicates that the upper 32 bits are zeroed.
+
+``BPF_ADD | BPF_X | BPF_ALU64`` means::
+
+  dst = dst + src
+
+``BPF_XOR | BPF_K | BPF_ALU`` means::
+
+  dst = (u32) dst ^ (u32) imm32
+
+``BPF_XOR | BPF_K | BPF_ALU64`` means::
+
+  dst = dst ^ imm32
+
+Also note that the division and modulo operations are unsigned. Thus, for
+``BPF_ALU``, 'imm' is first interpreted as an unsigned 32-bit value, whereas
+for ``BPF_ALU64``, 'imm' is first sign extended to 64 bits and the result
+interpreted as an unsigned 64-bit value. There are no instructions for
+signed division or modulo.
+
+Byte swap instructions
+~~~~~~~~~~~~~~~~~~~~~~
+
+The byte swap instructions use an instruction class of ``BPF_ALU`` and a 4-bit
+'code' field of ``BPF_END``.
+
+The byte swap instructions operate on the destination register
+only and do not use a separate source register or immediate value.
+
+The 1-bit source operand field in the opcode is used to select what byte
+order the operation convert from or to:
+
+=========  =====  =================================================
+source     value  description
+=========  =====  =================================================
+BPF_TO_LE  0x00   convert between host byte order and little endian
+BPF_TO_BE  0x08   convert between host byte order and big endian
+=========  =====  =================================================
+
+The 'imm' field encodes the width of the swap operations.  The following widths
+are supported: 16, 32 and 64.
+
+Examples:
+
+``BPF_ALU | BPF_TO_LE | BPF_END`` with imm = 16 means::
+
+  dst = htole16(dst)
+
+``BPF_ALU | BPF_TO_BE | BPF_END`` with imm = 64 means::
+
+  dst = htobe64(dst)
+
+Jump instructions
+-----------------
+
+``BPF_JMP32`` uses 32-bit wide operands while ``BPF_JMP`` uses 64-bit wide operands for
+otherwise identical operations.
+The 'code' field encodes the operation as below:
+
+========  =====  ===  ===========================================  =========================================
+code      value  src  description                                  notes
+========  =====  ===  ===========================================  =========================================
+BPF_JA    0x0    0x0  PC += offset                                 BPF_JMP only
+BPF_JEQ   0x1    any  PC += offset if dst == src
+BPF_JGT   0x2    any  PC += offset if dst > src                    unsigned
+BPF_JGE   0x3    any  PC += offset if dst >= src                   unsigned
+BPF_JSET  0x4    any  PC += offset if dst & src
+BPF_JNE   0x5    any  PC += offset if dst != src
+BPF_JSGT  0x6    any  PC += offset if dst > src                    signed
+BPF_JSGE  0x7    any  PC += offset if dst >= src                   signed
+BPF_CALL  0x8    0x0  call helper function by address              see `Helper functions`_
+BPF_CALL  0x8    0x1  call PC += offset                            see `Program-local functions`_
+BPF_CALL  0x8    0x2  call helper function by BTF ID               see `Helper functions`_
+BPF_EXIT  0x9    0x0  return                                       BPF_JMP only
+BPF_JLT   0xa    any  PC += offset if dst < src                    unsigned
+BPF_JLE   0xb    any  PC += offset if dst <= src                   unsigned
+BPF_JSLT  0xc    any  PC += offset if dst < src                    signed
+BPF_JSLE  0xd    any  PC += offset if dst <= src                   signed
+========  =====  ===  ===========================================  =========================================
+
+The eBPF program needs to store the return value into register R0 before doing a
+``BPF_EXIT``.
+
+Example:
+
+``BPF_JSGE | BPF_X | BPF_JMP32`` (0x7e) means::
+
+  if (s32)dst s>= (s32)src goto +offset
+
+where 's>=' indicates a signed '>=' comparison.
+
+Helper functions
+~~~~~~~~~~~~~~~~
+
+Helper functions are a concept whereby BPF programs can call into a
+set of function calls exposed by the underlying platform.
+
+Historically, each helper function was identified by an address
+encoded in the imm field.  The available helper functions may differ
+for each program type, but address values are unique across all program types.
+
+Platforms that support the BPF Type Format (BTF) support identifying
+a helper function by a BTF ID encoded in the imm field, where the BTF ID
+identifies the helper name and type.
+
+Program-local functions
+~~~~~~~~~~~~~~~~~~~~~~~
+Program-local functions are functions exposed by the same BPF program as the
+caller, and are referenced by offset from the call instruction, similar to
+``BPF_JA``.  A ``BPF_EXIT`` within the program-local function will return to
+the caller.
+
+Load and store instructions
+===========================
+
+For load and store instructions (``BPF_LD``, ``BPF_LDX``, ``BPF_ST``, and ``BPF_STX``), the
+8-bit 'opcode' field is divided as:
+
+============  ======  =================
+3 bits (MSB)  2 bits  3 bits (LSB)
+============  ======  =================
+mode          size    instruction class
+============  ======  =================
+
+The mode modifier is one of:
+
+  =============  =====  ====================================  =============
+  mode modifier  value  description                           reference
+  =============  =====  ====================================  =============
+  BPF_IMM        0x00   64-bit immediate instructions         `64-bit immediate instructions`_
+  BPF_ABS        0x20   legacy BPF packet access (absolute)   `Legacy BPF Packet access instructions`_
+  BPF_IND        0x40   legacy BPF packet access (indirect)   `Legacy BPF Packet access instructions`_
+  BPF_MEM        0x60   regular load and store operations     `Regular load and store operations`_
+  BPF_ATOMIC     0xc0   atomic operations                     `Atomic operations`_
+  =============  =====  ====================================  =============
+
+The size modifier is one of:
+
+  =============  =====  =====================
+  size modifier  value  description
+  =============  =====  =====================
+  BPF_W          0x00   word        (4 bytes)
+  BPF_H          0x08   half word   (2 bytes)
+  BPF_B          0x10   byte
+  BPF_DW         0x18   double word (8 bytes)
+  =============  =====  =====================
+
+Regular load and store operations
+---------------------------------
+
+The ``BPF_MEM`` mode modifier is used to encode regular load and store
+instructions that transfer data between a register and memory.
+
+``BPF_MEM | <size> | BPF_STX`` means::
+
+  *(size *) (dst + offset) = src
+
+``BPF_MEM | <size> | BPF_ST`` means::
+
+  *(size *) (dst + offset) = imm32
+
+``BPF_MEM | <size> | BPF_LDX`` means::
+
+  dst = *(size *) (src + offset)
+
+Where size is one of: ``BPF_B``, ``BPF_H``, ``BPF_W``, or ``BPF_DW``.
+
+Atomic operations
+-----------------
+
+Atomic operations are operations that operate on memory and can not be
+interrupted or corrupted by other access to the same memory region
+by other eBPF programs or means outside of this specification.
+
+All atomic operations supported by eBPF are encoded as store operations
+that use the ``BPF_ATOMIC`` mode modifier as follows:
+
+* ``BPF_ATOMIC | BPF_W | BPF_STX`` for 32-bit operations
+* ``BPF_ATOMIC | BPF_DW | BPF_STX`` for 64-bit operations
+* 8-bit and 16-bit wide atomic operations are not supported.
+
+The 'imm' field is used to encode the actual atomic operation.
+Simple atomic operation use a subset of the values defined to encode
+arithmetic operations in the 'imm' field to encode the atomic operation:
+
+========  =====  ===========
+imm       value  description
+========  =====  ===========
+BPF_ADD   0x00   atomic add
+BPF_OR    0x40   atomic or
+BPF_AND   0x50   atomic and
+BPF_XOR   0xa0   atomic xor
+========  =====  ===========
+
+
+``BPF_ATOMIC | BPF_W  | BPF_STX`` with 'imm' = BPF_ADD means::
+
+  *(u32 *)(dst + offset) += src
+
+``BPF_ATOMIC | BPF_DW | BPF_STX`` with 'imm' = BPF ADD means::
+
+  *(u64 *)(dst + offset) += src
+
+In addition to the simple atomic operations, there also is a modifier and
+two complex atomic operations:
+
+===========  ================  ===========================
+imm          value             description
+===========  ================  ===========================
+BPF_FETCH    0x01              modifier: return old value
+BPF_XCHG     0xe0 | BPF_FETCH  atomic exchange
+BPF_CMPXCHG  0xf0 | BPF_FETCH  atomic compare and exchange
+===========  ================  ===========================
+
+The ``BPF_FETCH`` modifier is optional for simple atomic operations, and
+always set for the complex atomic operations.  If the ``BPF_FETCH`` flag
+is set, then the operation also overwrites ``src`` with the value that
+was in memory before it was modified.
+
+The ``BPF_XCHG`` operation atomically exchanges ``src`` with the value
+addressed by ``dst + offset``.
+
+The ``BPF_CMPXCHG`` operation atomically compares the value addressed by
+``dst + offset`` with ``R0``. If they match, the value addressed by
+``dst + offset`` is replaced with ``src``. In either case, the
+value that was at ``dst + offset`` before the operation is zero-extended
+and loaded back to ``R0``.
+
+64-bit immediate instructions
+-----------------------------
+
+Instructions with the ``BPF_IMM`` 'mode' modifier use the wide instruction
+encoding defined in `Instruction encoding`_, and use the 'src' field of the
+basic instruction to hold an opcode subtype.
+
+The following table defines a set of ``BPF_IMM | BPF_DW | BPF_LD`` instructions
+with opcode subtypes in the 'src' field, using new terms such as "map"
+defined further below:
+
+=========================  ======  ===  =========================================  ===========  ==============
+opcode construction        opcode  src  pseudocode                                 imm type     dst type
+=========================  ======  ===  =========================================  ===========  ==============
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x0  dst = imm64                                integer      integer
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x1  dst = map_by_fd(imm)                       map fd       map
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x2  dst = map_val(map_by_fd(imm)) + next_imm   map fd       data pointer
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x3  dst = var_addr(imm)                        variable id  data pointer
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x4  dst = code_addr(imm)                       integer      code pointer
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x5  dst = map_by_idx(imm)                      map index    map
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x6  dst = map_val(map_by_idx(imm)) + next_imm  map index    data pointer
+=========================  ======  ===  =========================================  ===========  ==============
+
+where
+
+* map_by_fd(imm) means to convert a 32-bit file descriptor into an address of a map (see `Maps`_)
+* map_by_idx(imm) means to convert a 32-bit index into an address of a map
+* map_val(map) gets the address of the first value in a given map
+* var_addr(imm) gets the address of a platform variable (see `Platform Variables`_) with a given id
+* code_addr(imm) gets the address of the instruction at a specified relative offset in number of (64-bit) instructions
+* the 'imm type' can be used by disassemblers for display
+* the 'dst type' can be used for verification and JIT compilation purposes
+
+Maps
+~~~~
+
+Maps are shared memory regions accessible by eBPF programs on some platforms.
+A map can have various semantics as defined in a separate document, and may or
+may not have a single contiguous memory region, but the 'map_val(map)' is
+currently only defined for maps that do have a single contiguous memory region.
+
+Each map can have a file descriptor (fd) if supported by the platform, where
+'map_by_fd(imm)' means to get the map with the specified file descriptor. Each
+BPF program can also be defined to use a set of maps associated with the
+program at load time, and 'map_by_idx(imm)' means to get the map with the given
+index in the set associated with the BPF program containing the instruction.
+
+Platform Variables
+~~~~~~~~~~~~~~~~~~
+
+Platform variables are memory regions, identified by integer ids, exposed by
+the runtime and accessible by BPF programs on some platforms.  The
+'var_addr(imm)' operation means to get the address of the memory region
+identified by the given id.
+
+Legacy BPF Packet access instructions
+-------------------------------------
+
+eBPF previously introduced special instructions for access to packet data that were
+carried over from classic BPF. However, these instructions are
+deprecated and should no longer be used.
diff --git a/Documentation/bpf/kfuncs.rst b/Documentation/bpf/kfuncs.rst
new file mode 100644
index 000000000000..ea2516374d92
--- /dev/null
+++ b/Documentation/bpf/kfuncs.rst
@@ -0,0 +1,609 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _kfuncs-header-label:
+
+=============================
+BPF Kernel Functions (kfuncs)
+=============================
+
+1. Introduction
+===============
+
+BPF Kernel Functions or more commonly known as kfuncs are functions in the Linux
+kernel which are exposed for use by BPF programs. Unlike normal BPF helpers,
+kfuncs do not have a stable interface and can change from one kernel release to
+another. Hence, BPF programs need to be updated in response to changes in the
+kernel. See :ref:`BPF_kfunc_lifecycle_expectations` for more information.
+
+2. Defining a kfunc
+===================
+
+There are two ways to expose a kernel function to BPF programs, either make an
+existing function in the kernel visible, or add a new wrapper for BPF. In both
+cases, care must be taken that BPF program can only call such function in a
+valid context. To enforce this, visibility of a kfunc can be per program type.
+
+If you are not creating a BPF wrapper for existing kernel function, skip ahead
+to :ref:`BPF_kfunc_nodef`.
+
+2.1 Creating a wrapper kfunc
+----------------------------
+
+When defining a wrapper kfunc, the wrapper function should have extern linkage.
+This prevents the compiler from optimizing away dead code, as this wrapper kfunc
+is not invoked anywhere in the kernel itself. It is not necessary to provide a
+prototype in a header for the wrapper kfunc.
+
+An example is given below::
+
+        /* Disables missing prototype warnings */
+        __diag_push();
+        __diag_ignore_all("-Wmissing-prototypes",
+                          "Global kfuncs as their definitions will be in BTF");
+
+        __bpf_kfunc struct task_struct *bpf_find_get_task_by_vpid(pid_t nr)
+        {
+                return find_get_task_by_vpid(nr);
+        }
+
+        __diag_pop();
+
+A wrapper kfunc is often needed when we need to annotate parameters of the
+kfunc. Otherwise one may directly make the kfunc visible to the BPF program by
+registering it with the BPF subsystem. See :ref:`BPF_kfunc_nodef`.
+
+2.2 Annotating kfunc parameters
+-------------------------------
+
+Similar to BPF helpers, there is sometime need for additional context required
+by the verifier to make the usage of kernel functions safer and more useful.
+Hence, we can annotate a parameter by suffixing the name of the argument of the
+kfunc with a __tag, where tag may be one of the supported annotations.
+
+2.2.1 __sz Annotation
+---------------------
+
+This annotation is used to indicate a memory and size pair in the argument list.
+An example is given below::
+
+        __bpf_kfunc void bpf_memzero(void *mem, int mem__sz)
+        {
+        ...
+        }
+
+Here, the verifier will treat first argument as a PTR_TO_MEM, and second
+argument as its size. By default, without __sz annotation, the size of the type
+of the pointer is used. Without __sz annotation, a kfunc cannot accept a void
+pointer.
+
+2.2.2 __k Annotation
+--------------------
+
+This annotation is only understood for scalar arguments, where it indicates that
+the verifier must check the scalar argument to be a known constant, which does
+not indicate a size parameter, and the value of the constant is relevant to the
+safety of the program.
+
+An example is given below::
+
+        __bpf_kfunc void *bpf_obj_new(u32 local_type_id__k, ...)
+        {
+        ...
+        }
+
+Here, bpf_obj_new uses local_type_id argument to find out the size of that type
+ID in program's BTF and return a sized pointer to it. Each type ID will have a
+distinct size, hence it is crucial to treat each such call as distinct when
+values don't match during verifier state pruning checks.
+
+Hence, whenever a constant scalar argument is accepted by a kfunc which is not a
+size parameter, and the value of the constant matters for program safety, __k
+suffix should be used.
+
+2.2.2 __uninit Annotation
+-------------------------
+
+This annotation is used to indicate that the argument will be treated as
+uninitialized.
+
+An example is given below::
+
+        __bpf_kfunc int bpf_dynptr_from_skb(..., struct bpf_dynptr_kern *ptr__uninit)
+        {
+        ...
+        }
+
+Here, the dynptr will be treated as an uninitialized dynptr. Without this
+annotation, the verifier will reject the program if the dynptr passed in is
+not initialized.
+
+.. _BPF_kfunc_nodef:
+
+2.3 Using an existing kernel function
+-------------------------------------
+
+When an existing function in the kernel is fit for consumption by BPF programs,
+it can be directly registered with the BPF subsystem. However, care must still
+be taken to review the context in which it will be invoked by the BPF program
+and whether it is safe to do so.
+
+2.4 Annotating kfuncs
+---------------------
+
+In addition to kfuncs' arguments, verifier may need more information about the
+type of kfunc(s) being registered with the BPF subsystem. To do so, we define
+flags on a set of kfuncs as follows::
+
+        BTF_SET8_START(bpf_task_set)
+        BTF_ID_FLAGS(func, bpf_get_task_pid, KF_ACQUIRE | KF_RET_NULL)
+        BTF_ID_FLAGS(func, bpf_put_pid, KF_RELEASE)
+        BTF_SET8_END(bpf_task_set)
+
+This set encodes the BTF ID of each kfunc listed above, and encodes the flags
+along with it. Ofcourse, it is also allowed to specify no flags.
+
+kfunc definitions should also always be annotated with the ``__bpf_kfunc``
+macro. This prevents issues such as the compiler inlining the kfunc if it's a
+static kernel function, or the function being elided in an LTO build as it's
+not used in the rest of the kernel. Developers should not manually add
+annotations to their kfunc to prevent these issues. If an annotation is
+required to prevent such an issue with your kfunc, it is a bug and should be
+added to the definition of the macro so that other kfuncs are similarly
+protected. An example is given below::
+
+        __bpf_kfunc struct task_struct *bpf_get_task_pid(s32 pid)
+        {
+        ...
+        }
+
+2.4.1 KF_ACQUIRE flag
+---------------------
+
+The KF_ACQUIRE flag is used to indicate that the kfunc returns a pointer to a
+refcounted object. The verifier will then ensure that the pointer to the object
+is eventually released using a release kfunc, or transferred to a map using a
+referenced kptr (by invoking bpf_kptr_xchg). If not, the verifier fails the
+loading of the BPF program until no lingering references remain in all possible
+explored states of the program.
+
+2.4.2 KF_RET_NULL flag
+----------------------
+
+The KF_RET_NULL flag is used to indicate that the pointer returned by the kfunc
+may be NULL. Hence, it forces the user to do a NULL check on the pointer
+returned from the kfunc before making use of it (dereferencing or passing to
+another helper). This flag is often used in pairing with KF_ACQUIRE flag, but
+both are orthogonal to each other.
+
+2.4.3 KF_RELEASE flag
+---------------------
+
+The KF_RELEASE flag is used to indicate that the kfunc releases the pointer
+passed in to it. There can be only one referenced pointer that can be passed
+in. All copies of the pointer being released are invalidated as a result of
+invoking kfunc with this flag. KF_RELEASE kfuncs automatically receive the
+protection afforded by the KF_TRUSTED_ARGS flag described below.
+
+2.4.4 KF_TRUSTED_ARGS flag
+--------------------------
+
+The KF_TRUSTED_ARGS flag is used for kfuncs taking pointer arguments. It
+indicates that the all pointer arguments are valid, and that all pointers to
+BTF objects have been passed in their unmodified form (that is, at a zero
+offset, and without having been obtained from walking another pointer, with one
+exception described below).
+
+There are two types of pointers to kernel objects which are considered "valid":
+
+1. Pointers which are passed as tracepoint or struct_ops callback arguments.
+2. Pointers which were returned from a KF_ACQUIRE kfunc.
+
+Pointers to non-BTF objects (e.g. scalar pointers) may also be passed to
+KF_TRUSTED_ARGS kfuncs, and may have a non-zero offset.
+
+The definition of "valid" pointers is subject to change at any time, and has
+absolutely no ABI stability guarantees.
+
+As mentioned above, a nested pointer obtained from walking a trusted pointer is
+no longer trusted, with one exception. If a struct type has a field that is
+guaranteed to be valid as long as its parent pointer is trusted, the
+``BTF_TYPE_SAFE_NESTED`` macro can be used to express that to the verifier as
+follows:
+
+.. code-block:: c
+
+	BTF_TYPE_SAFE_NESTED(struct task_struct) {
+		const cpumask_t *cpus_ptr;
+	};
+
+In other words, you must:
+
+1. Wrap the trusted pointer type in the ``BTF_TYPE_SAFE_NESTED`` macro.
+
+2. Specify the type and name of the trusted nested field. This field must match
+   the field in the original type definition exactly.
+
+2.4.5 KF_SLEEPABLE flag
+-----------------------
+
+The KF_SLEEPABLE flag is used for kfuncs that may sleep. Such kfuncs can only
+be called by sleepable BPF programs (BPF_F_SLEEPABLE).
+
+2.4.6 KF_DESTRUCTIVE flag
+--------------------------
+
+The KF_DESTRUCTIVE flag is used to indicate functions calling which is
+destructive to the system. For example such a call can result in system
+rebooting or panicking. Due to this additional restrictions apply to these
+calls. At the moment they only require CAP_SYS_BOOT capability, but more can be
+added later.
+
+2.4.7 KF_RCU flag
+-----------------
+
+The KF_RCU flag is a weaker version of KF_TRUSTED_ARGS. The kfuncs marked with
+KF_RCU expect either PTR_TRUSTED or MEM_RCU arguments. The verifier guarantees
+that the objects are valid and there is no use-after-free. The pointers are not
+NULL, but the object's refcount could have reached zero. The kfuncs need to
+consider doing refcnt != 0 check, especially when returning a KF_ACQUIRE
+pointer. Note as well that a KF_ACQUIRE kfunc that is KF_RCU should very likely
+also be KF_RET_NULL.
+
+.. _KF_deprecated_flag:
+
+2.4.8 KF_DEPRECATED flag
+------------------------
+
+The KF_DEPRECATED flag is used for kfuncs which are scheduled to be
+changed or removed in a subsequent kernel release. A kfunc that is
+marked with KF_DEPRECATED should also have any relevant information
+captured in its kernel doc. Such information typically includes the
+kfunc's expected remaining lifespan, a recommendation for new
+functionality that can replace it if any is available, and possibly a
+rationale for why it is being removed.
+
+Note that while on some occasions, a KF_DEPRECATED kfunc may continue to be
+supported and have its KF_DEPRECATED flag removed, it is likely to be far more
+difficult to remove a KF_DEPRECATED flag after it's been added than it is to
+prevent it from being added in the first place. As described in
+:ref:`BPF_kfunc_lifecycle_expectations`, users that rely on specific kfuncs are
+encouraged to make their use-cases known as early as possible, and participate
+in upstream discussions regarding whether to keep, change, deprecate, or remove
+those kfuncs if and when such discussions occur.
+
+2.5 Registering the kfuncs
+--------------------------
+
+Once the kfunc is prepared for use, the final step to making it visible is
+registering it with the BPF subsystem. Registration is done per BPF program
+type. An example is shown below::
+
+        BTF_SET8_START(bpf_task_set)
+        BTF_ID_FLAGS(func, bpf_get_task_pid, KF_ACQUIRE | KF_RET_NULL)
+        BTF_ID_FLAGS(func, bpf_put_pid, KF_RELEASE)
+        BTF_SET8_END(bpf_task_set)
+
+        static const struct btf_kfunc_id_set bpf_task_kfunc_set = {
+                .owner = THIS_MODULE,
+                .set   = &bpf_task_set,
+        };
+
+        static int init_subsystem(void)
+        {
+                return register_btf_kfunc_id_set(BPF_PROG_TYPE_TRACING, &bpf_task_kfunc_set);
+        }
+        late_initcall(init_subsystem);
+
+2.6  Specifying no-cast aliases with ___init
+--------------------------------------------
+
+The verifier will always enforce that the BTF type of a pointer passed to a
+kfunc by a BPF program, matches the type of pointer specified in the kfunc
+definition. The verifier, does, however, allow types that are equivalent
+according to the C standard to be passed to the same kfunc arg, even if their
+BTF_IDs differ.
+
+For example, for the following type definition:
+
+.. code-block:: c
+
+	struct bpf_cpumask {
+		cpumask_t cpumask;
+		refcount_t usage;
+	};
+
+The verifier would allow a ``struct bpf_cpumask *`` to be passed to a kfunc
+taking a ``cpumask_t *`` (which is a typedef of ``struct cpumask *``). For
+instance, both ``struct cpumask *`` and ``struct bpf_cpmuask *`` can be passed
+to bpf_cpumask_test_cpu().
+
+In some cases, this type-aliasing behavior is not desired. ``struct
+nf_conn___init`` is one such example:
+
+.. code-block:: c
+
+	struct nf_conn___init {
+		struct nf_conn ct;
+	};
+
+The C standard would consider these types to be equivalent, but it would not
+always be safe to pass either type to a trusted kfunc. ``struct
+nf_conn___init`` represents an allocated ``struct nf_conn`` object that has
+*not yet been initialized*, so it would therefore be unsafe to pass a ``struct
+nf_conn___init *`` to a kfunc that's expecting a fully initialized ``struct
+nf_conn *`` (e.g. ``bpf_ct_change_timeout()``).
+
+In order to accommodate such requirements, the verifier will enforce strict
+PTR_TO_BTF_ID type matching if two types have the exact same name, with one
+being suffixed with ``___init``.
+
+.. _BPF_kfunc_lifecycle_expectations:
+
+3. kfunc lifecycle expectations
+===============================
+
+kfuncs provide a kernel <-> kernel API, and thus are not bound by any of the
+strict stability restrictions associated with kernel <-> user UAPIs. This means
+they can be thought of as similar to EXPORT_SYMBOL_GPL, and can therefore be
+modified or removed by a maintainer of the subsystem they're defined in when
+it's deemed necessary.
+
+Like any other change to the kernel, maintainers will not change or remove a
+kfunc without having a reasonable justification.  Whether or not they'll choose
+to change a kfunc will ultimately depend on a variety of factors, such as how
+widely used the kfunc is, how long the kfunc has been in the kernel, whether an
+alternative kfunc exists, what the norm is in terms of stability for the
+subsystem in question, and of course what the technical cost is of continuing
+to support the kfunc.
+
+There are several implications of this:
+
+a) kfuncs that are widely used or have been in the kernel for a long time will
+   be more difficult to justify being changed or removed by a maintainer. In
+   other words, kfuncs that are known to have a lot of users and provide
+   significant value provide stronger incentives for maintainers to invest the
+   time and complexity in supporting them. It is therefore important for
+   developers that are using kfuncs in their BPF programs to communicate and
+   explain how and why those kfuncs are being used, and to participate in
+   discussions regarding those kfuncs when they occur upstream.
+
+b) Unlike regular kernel symbols marked with EXPORT_SYMBOL_GPL, BPF programs
+   that call kfuncs are generally not part of the kernel tree. This means that
+   refactoring cannot typically change callers in-place when a kfunc changes,
+   as is done for e.g. an upstreamed driver being updated in place when a
+   kernel symbol is changed.
+
+   Unlike with regular kernel symbols, this is expected behavior for BPF
+   symbols, and out-of-tree BPF programs that use kfuncs should be considered
+   relevant to discussions and decisions around modifying and removing those
+   kfuncs. The BPF community will take an active role in participating in
+   upstream discussions when necessary to ensure that the perspectives of such
+   users are taken into account.
+
+c) A kfunc will never have any hard stability guarantees. BPF APIs cannot and
+   will not ever hard-block a change in the kernel purely for stability
+   reasons. That being said, kfuncs are features that are meant to solve
+   problems and provide value to users. The decision of whether to change or
+   remove a kfunc is a multivariate technical decision that is made on a
+   case-by-case basis, and which is informed by data points such as those
+   mentioned above. It is expected that a kfunc being removed or changed with
+   no warning will not be a common occurrence or take place without sound
+   justification, but it is a possibility that must be accepted if one is to
+   use kfuncs.
+
+3.1 kfunc deprecation
+---------------------
+
+As described above, while sometimes a maintainer may find that a kfunc must be
+changed or removed immediately to accommodate some changes in their subsystem,
+usually kfuncs will be able to accommodate a longer and more measured
+deprecation process. For example, if a new kfunc comes along which provides
+superior functionality to an existing kfunc, the existing kfunc may be
+deprecated for some period of time to allow users to migrate their BPF programs
+to use the new one. Or, if a kfunc has no known users, a decision may be made
+to remove the kfunc (without providing an alternative API) after some
+deprecation period so as to provide users with a window to notify the kfunc
+maintainer if it turns out that the kfunc is actually being used.
+
+It's expected that the common case will be that kfuncs will go through a
+deprecation period rather than being changed or removed without warning. As
+described in :ref:`KF_deprecated_flag`, the kfunc framework provides the
+KF_DEPRECATED flag to kfunc developers to signal to users that a kfunc has been
+deprecated. Once a kfunc has been marked with KF_DEPRECATED, the following
+procedure is followed for removal:
+
+1. Any relevant information for deprecated kfuncs is documented in the kfunc's
+   kernel docs. This documentation will typically include the kfunc's expected
+   remaining lifespan, a recommendation for new functionality that can replace
+   the usage of the deprecated function (or an explanation as to why no such
+   replacement exists), etc.
+
+2. The deprecated kfunc is kept in the kernel for some period of time after it
+   was first marked as deprecated. This time period will be chosen on a
+   case-by-case basis, and will typically depend on how widespread the use of
+   the kfunc is, how long it has been in the kernel, and how hard it is to move
+   to alternatives. This deprecation time period is "best effort", and as
+   described :ref:`above<BPF_kfunc_lifecycle_expectations>`, circumstances may
+   sometimes dictate that the kfunc be removed before the full intended
+   deprecation period has elapsed.
+
+3. After the deprecation period the kfunc will be removed. At this point, BPF
+   programs calling the kfunc will be rejected by the verifier.
+
+4. Core kfuncs
+==============
+
+The BPF subsystem provides a number of "core" kfuncs that are potentially
+applicable to a wide variety of different possible use cases and programs.
+Those kfuncs are documented here.
+
+4.1 struct task_struct * kfuncs
+-------------------------------
+
+There are a number of kfuncs that allow ``struct task_struct *`` objects to be
+used as kptrs:
+
+.. kernel-doc:: kernel/bpf/helpers.c
+   :identifiers: bpf_task_acquire bpf_task_release
+
+These kfuncs are useful when you want to acquire or release a reference to a
+``struct task_struct *`` that was passed as e.g. a tracepoint arg, or a
+struct_ops callback arg. For example:
+
+.. code-block:: c
+
+	/**
+	 * A trivial example tracepoint program that shows how to
+	 * acquire and release a struct task_struct * pointer.
+	 */
+	SEC("tp_btf/task_newtask")
+	int BPF_PROG(task_acquire_release_example, struct task_struct *task, u64 clone_flags)
+	{
+		struct task_struct *acquired;
+
+		acquired = bpf_task_acquire(task);
+		if (acquired)
+			/*
+			 * In a typical program you'd do something like store
+			 * the task in a map, and the map will automatically
+			 * release it later. Here, we release it manually.
+			 */
+			bpf_task_release(acquired);
+		return 0;
+	}
+
+
+References acquired on ``struct task_struct *`` objects are RCU protected.
+Therefore, when in an RCU read region, you can obtain a pointer to a task
+embedded in a map value without having to acquire a reference:
+
+.. code-block:: c
+
+	#define private(name) SEC(".data." #name) __hidden __attribute__((aligned(8)))
+	private(TASK) static struct task_struct *global;
+
+	/**
+	 * A trivial example showing how to access a task stored
+	 * in a map using RCU.
+	 */
+	SEC("tp_btf/task_newtask")
+	int BPF_PROG(task_rcu_read_example, struct task_struct *task, u64 clone_flags)
+	{
+		struct task_struct *local_copy;
+
+		bpf_rcu_read_lock();
+		local_copy = global;
+		if (local_copy)
+			/*
+			 * We could also pass local_copy to kfuncs or helper functions here,
+			 * as we're guaranteed that local_copy will be valid until we exit
+			 * the RCU read region below.
+			 */
+			bpf_printk("Global task %s is valid", local_copy->comm);
+		else
+			bpf_printk("No global task found");
+		bpf_rcu_read_unlock();
+
+		/* At this point we can no longer reference local_copy. */
+
+		return 0;
+	}
+
+----
+
+A BPF program can also look up a task from a pid. This can be useful if the
+caller doesn't have a trusted pointer to a ``struct task_struct *`` object that
+it can acquire a reference on with bpf_task_acquire().
+
+.. kernel-doc:: kernel/bpf/helpers.c
+   :identifiers: bpf_task_from_pid
+
+Here is an example of it being used:
+
+.. code-block:: c
+
+	SEC("tp_btf/task_newtask")
+	int BPF_PROG(task_get_pid_example, struct task_struct *task, u64 clone_flags)
+	{
+		struct task_struct *lookup;
+
+		lookup = bpf_task_from_pid(task->pid);
+		if (!lookup)
+			/* A task should always be found, as %task is a tracepoint arg. */
+			return -ENOENT;
+
+		if (lookup->pid != task->pid) {
+			/* bpf_task_from_pid() looks up the task via its
+			 * globally-unique pid from the init_pid_ns. Thus,
+			 * the pid of the lookup task should always be the
+			 * same as the input task.
+			 */
+			bpf_task_release(lookup);
+			return -EINVAL;
+		}
+
+		/* bpf_task_from_pid() returns an acquired reference,
+		 * so it must be dropped before returning from the
+		 * tracepoint handler.
+		 */
+		bpf_task_release(lookup);
+		return 0;
+	}
+
+4.2 struct cgroup * kfuncs
+--------------------------
+
+``struct cgroup *`` objects also have acquire and release functions:
+
+.. kernel-doc:: kernel/bpf/helpers.c
+   :identifiers: bpf_cgroup_acquire bpf_cgroup_release
+
+These kfuncs are used in exactly the same manner as bpf_task_acquire() and
+bpf_task_release() respectively, so we won't provide examples for them.
+
+----
+
+Other kfuncs available for interacting with ``struct cgroup *`` objects are
+bpf_cgroup_ancestor() and bpf_cgroup_from_id(), allowing callers to access
+the ancestor of a cgroup and find a cgroup by its ID, respectively. Both
+return a cgroup kptr.
+
+.. kernel-doc:: kernel/bpf/helpers.c
+   :identifiers: bpf_cgroup_ancestor
+
+.. kernel-doc:: kernel/bpf/helpers.c
+   :identifiers: bpf_cgroup_from_id
+
+Eventually, BPF should be updated to allow this to happen with a normal memory
+load in the program itself. This is currently not possible without more work in
+the verifier. bpf_cgroup_ancestor() can be used as follows:
+
+.. code-block:: c
+
+	/**
+	 * Simple tracepoint example that illustrates how a cgroup's
+	 * ancestor can be accessed using bpf_cgroup_ancestor().
+	 */
+	SEC("tp_btf/cgroup_mkdir")
+	int BPF_PROG(cgrp_ancestor_example, struct cgroup *cgrp, const char *path)
+	{
+		struct cgroup *parent;
+
+		/* The parent cgroup resides at the level before the current cgroup's level. */
+		parent = bpf_cgroup_ancestor(cgrp, cgrp->level - 1);
+		if (!parent)
+			return -ENOENT;
+
+		bpf_printk("Parent id is %d", parent->self.id);
+
+		/* Return the parent cgroup that was acquired above. */
+		bpf_cgroup_release(parent);
+		return 0;
+	}
+
+4.3 struct cpumask * kfuncs
+---------------------------
+
+BPF provides a set of kfuncs that can be used to query, allocate, mutate, and
+destroy struct cpumask * objects. Please refer to :ref:`cpumasks-header-label`
+for more details.
diff --git a/Documentation/bpf/libbpf/index.rst b/Documentation/bpf/libbpf/index.rst
index 4f8adfc3ab83..7545a2049692 100644
--- a/Documentation/bpf/libbpf/index.rst
+++ b/Documentation/bpf/libbpf/index.rst
@@ -1,22 +1,33 @@
 .. SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
 
+.. _libbpf:
+
+======
 libbpf
 ======
 
-For API documentation see the `versioned API documentation site <https://libbpf.readthedocs.io/en/latest/api.html>`_.
+If you are looking to develop BPF applications using the libbpf library, this
+directory contains important documentation that you should read.
+
+To get started, it is recommended to begin with the :doc:`libbpf Overview
+<libbpf_overview>` document, which provides a high-level understanding of the
+libbpf APIs and their usage. This will give you a solid foundation to start
+exploring and utilizing the various features of libbpf to develop your BPF
+applications.
 
 .. toctree::
    :maxdepth: 1
 
+   libbpf_overview
+   API Documentation <https://libbpf.readthedocs.io/en/latest/api.html>
+   program_types
    libbpf_naming_convention
    libbpf_build
 
-This is documentation for libbpf, a userspace library for loading and
-interacting with bpf programs.
 
-All general BPF questions, including kernel functionality, libbpf APIs and
-their application, should be sent to bpf@vger.kernel.org mailing list.
-You can `subscribe <http://vger.kernel.org/vger-lists.html#bpf>`_ to the
-mailing list search its `archive <https://lore.kernel.org/bpf/>`_.
-Please search the archive before asking new questions. It very well might
-be that this was already addressed or answered before.
+All general BPF questions, including kernel functionality, libbpf APIs and their
+application, should be sent to bpf@vger.kernel.org mailing list.  You can
+`subscribe <http://vger.kernel.org/vger-lists.html#bpf>`_ to the mailing list
+search its `archive <https://lore.kernel.org/bpf/>`_.  Please search the archive
+before asking new questions. It may be that this was already addressed or
+answered before.
diff --git a/Documentation/bpf/libbpf/libbpf_naming_convention.rst b/Documentation/bpf/libbpf/libbpf_naming_convention.rst
index 9c68d5014ff1..b5b41b61b3c0 100644
--- a/Documentation/bpf/libbpf/libbpf_naming_convention.rst
+++ b/Documentation/bpf/libbpf/libbpf_naming_convention.rst
@@ -9,8 +9,8 @@ described here. It's recommended to follow these conventions whenever a
 new function or type is added to keep libbpf API clean and consistent.
 
 All types and functions provided by libbpf API should have one of the
-following prefixes: ``bpf_``, ``btf_``, ``libbpf_``, ``xsk_``,
-``btf_dump_``, ``ring_buffer_``, ``perf_buffer_``.
+following prefixes: ``bpf_``, ``btf_``, ``libbpf_``, ``btf_dump_``,
+``ring_buffer_``, ``perf_buffer_``.
 
 System call wrappers
 --------------------
@@ -59,15 +59,6 @@ Auxiliary functions and types that don't fit well in any of categories
 described above should have ``libbpf_`` prefix, e.g.
 ``libbpf_get_error`` or ``libbpf_prog_type_by_name``.
 
-AF_XDP functions
--------------------
-
-AF_XDP functions should have an ``xsk_`` prefix, e.g.
-``xsk_umem__get_data`` or ``xsk_umem__create``. The interface consists
-of both low-level ring access functions and high-level configuration
-functions. These can be mixed and matched. Note that these functions
-are not reentrant for performance reasons.
-
 ABI
 ---
 
@@ -92,8 +83,8 @@ This prevents from accidentally exporting a symbol, that is not supposed
 to be a part of ABI what, in turn, improves both libbpf developer- and
 user-experiences.
 
-ABI versionning
----------------
+ABI versioning
+--------------
 
 To make future ABI extensions possible libbpf ABI is versioned.
 Versioning is implemented by ``libbpf.map`` version script that is
@@ -150,6 +141,46 @@ mirror of the mainline's version of libbpf for a stand-alone build.
 However, all changes to libbpf's code base must be upstreamed through
 the mainline kernel tree.
 
+
+API documentation convention
+============================
+
+The libbpf API is documented via comments above definitions in
+header files. These comments can be rendered by doxygen and sphinx
+for well organized html output. This section describes the
+convention in which these comments should be formatted.
+
+Here is an example from btf.h:
+
+.. code-block:: c
+
+        /**
+         * @brief **btf__new()** creates a new instance of a BTF object from the raw
+         * bytes of an ELF's BTF section
+         * @param data raw bytes
+         * @param size number of bytes passed in `data`
+         * @return new BTF object instance which has to be eventually freed with
+         * **btf__free()**
+         *
+         * On error, error-code-encoded-as-pointer is returned, not a NULL. To extract
+         * error code from such a pointer `libbpf_get_error()` should be used. If
+         * `libbpf_set_strict_mode(LIBBPF_STRICT_CLEAN_PTRS)` is enabled, NULL is
+         * returned on error instead. In both cases thread-local `errno` variable is
+         * always set to error code as well.
+         */
+
+The comment must start with a block comment of the form '/\*\*'.
+
+The documentation always starts with a @brief directive. This line is a short
+description about this API. It starts with the name of the API, denoted in bold
+like so: **api_name**. Please include an open and close parenthesis if this is a
+function. Follow with the short description of the API. A longer form description
+can be added below the last directive, at the bottom of the comment.
+
+Parameters are denoted with the @param directive, there should be one for each
+parameter. If this is a function with a non-void return, use the @return directive
+to document it.
+
 License
 -------------------
 
diff --git a/Documentation/bpf/libbpf/libbpf_overview.rst b/Documentation/bpf/libbpf/libbpf_overview.rst
new file mode 100644
index 000000000000..f36a2d4ffea2
--- /dev/null
+++ b/Documentation/bpf/libbpf/libbpf_overview.rst
@@ -0,0 +1,228 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+libbpf Overview
+===============
+
+libbpf is a C-based library containing a BPF loader that takes compiled BPF
+object files and prepares and loads them into the Linux kernel. libbpf takes the
+heavy lifting of loading, verifying, and attaching BPF programs to various
+kernel hooks, allowing BPF application developers to focus only on BPF program
+correctness and performance.
+
+The following are the high-level features supported by libbpf:
+
+* Provides high-level and low-level APIs for user space programs to interact
+  with BPF programs. The low-level APIs wrap all the bpf system call
+  functionality, which is useful when users need more fine-grained control
+  over the interactions between user space and BPF programs.
+* Provides overall support for the BPF object skeleton generated by bpftool.
+  The skeleton file simplifies the process for the user space programs to access
+  global variables and work with BPF programs.
+* Provides BPF-side APIS, including BPF helper definitions, BPF maps support,
+  and tracing helpers, allowing developers to simplify BPF code writing.
+* Supports BPF CO-RE mechanism, enabling BPF developers to write portable
+  BPF programs that can be compiled once and run across different kernel
+  versions.
+
+This document will delve into the above concepts in detail, providing a deeper
+understanding of the capabilities and advantages of libbpf and how it can help
+you develop BPF applications efficiently.
+
+BPF App Lifecycle and libbpf APIs
+==================================
+
+A BPF application consists of one or more BPF programs (either cooperating or
+completely independent), BPF maps, and global variables. The global
+variables are shared between all BPF programs, which allows them to cooperate on
+a common set of data. libbpf provides APIs that user space programs can use to
+manipulate the BPF programs by triggering different phases of a BPF application
+lifecycle.
+
+The following section provides a brief overview of each phase in the BPF life
+cycle:
+
+* **Open phase**: In this phase, libbpf parses the BPF
+  object file and discovers BPF maps, BPF programs, and global variables. After
+  a BPF app is opened, user space apps can make additional adjustments
+  (setting BPF program types, if necessary; pre-setting initial values for
+  global variables, etc.) before all the entities are created and loaded.
+
+* **Load phase**: In the load phase, libbpf creates BPF
+  maps, resolves various relocations, and verifies and loads BPF programs into
+  the kernel. At this point, libbpf validates all the parts of a BPF application
+  and loads the BPF program into the kernel, but no BPF program has yet been
+  executed. After the load phase, it’s possible to set up the initial BPF map
+  state without racing with the BPF program code execution.
+
+* **Attachment phase**: In this phase, libbpf
+  attaches BPF programs to various BPF hook points (e.g., tracepoints, kprobes,
+  cgroup hooks, network packet processing pipeline, etc.). During this
+  phase, BPF programs perform useful work such as processing
+  packets, or updating BPF maps and global variables that can be read from user
+  space.
+
+* **Tear down phase**: In the tear down phase,
+  libbpf detaches BPF programs and unloads them from the kernel. BPF maps are
+  destroyed, and all the resources used by the BPF app are freed.
+
+BPF Object Skeleton File
+========================
+
+BPF skeleton is an alternative interface to libbpf APIs for working with BPF
+objects. Skeleton code abstract away generic libbpf APIs to significantly
+simplify code for manipulating BPF programs from user space. Skeleton code
+includes a bytecode representation of the BPF object file, simplifying the
+process of distributing your BPF code. With BPF bytecode embedded, there are no
+extra files to deploy along with your application binary.
+
+You can generate the skeleton header file ``(.skel.h)`` for a specific object
+file by passing the BPF object to the bpftool. The generated BPF skeleton
+provides the following custom functions that correspond to the BPF lifecycle,
+each of them prefixed with the specific object name:
+
+* ``<name>__open()`` – creates and opens BPF application (``<name>`` stands for
+  the specific bpf object name)
+* ``<name>__load()`` – instantiates, loads,and verifies BPF application parts
+* ``<name>__attach()`` – attaches all auto-attachable BPF programs (it’s
+  optional, you can have more control by using libbpf APIs directly)
+* ``<name>__destroy()`` – detaches all BPF programs and
+  frees up all used resources
+
+Using the skeleton code is the recommended way to work with bpf programs. Keep
+in mind, BPF skeleton provides access to the underlying BPF object, so whatever
+was possible to do with generic libbpf APIs is still possible even when the BPF
+skeleton is used. It's an additive convenience feature, with no syscalls, and no
+cumbersome code.
+
+Other Advantages of Using Skeleton File
+---------------------------------------
+
+* BPF skeleton provides an interface for user space programs to work with BPF
+  global variables. The skeleton code memory maps global variables as a struct
+  into user space. The struct interface allows user space programs to initialize
+  BPF programs before the BPF load phase and fetch and update data from user
+  space afterward.
+
+* The ``skel.h`` file reflects the object file structure by listing out the
+  available maps, programs, etc. BPF skeleton provides direct access to all the
+  BPF maps and BPF programs as struct fields. This eliminates the need for
+  string-based lookups with ``bpf_object_find_map_by_name()`` and
+  ``bpf_object_find_program_by_name()`` APIs, reducing errors due to BPF source
+  code and user-space code getting out of sync.
+
+* The embedded bytecode representation of the object file ensures that the
+  skeleton and the BPF object file are always in sync.
+
+BPF Helpers
+===========
+
+libbpf provides BPF-side APIs that BPF programs can use to interact with the
+system. The BPF helpers definition allows developers to use them in BPF code as
+any other plain C function. For example, there are helper functions to print
+debugging messages, get the time since the system was booted, interact with BPF
+maps, manipulate network packets, etc.
+
+For a complete description of what the helpers do, the arguments they take, and
+the return value, see the `bpf-helpers
+<https://man7.org/linux/man-pages/man7/bpf-helpers.7.html>`_ man page.
+
+BPF CO-RE (Compile Once – Run Everywhere)
+=========================================
+
+BPF programs work in the kernel space and have access to kernel memory and data
+structures. One limitation that BPF applications come across is the lack of
+portability across different kernel versions and configurations. `BCC
+<https://github.com/iovisor/bcc/>`_ is one of the solutions for BPF
+portability. However, it comes with runtime overhead and a large binary size
+from embedding the compiler with the application.
+
+libbpf steps up the BPF program portability by supporting the BPF CO-RE concept.
+BPF CO-RE brings together BTF type information, libbpf, and the compiler to
+produce a single executable binary that you can run on multiple kernel versions
+and configurations.
+
+To make BPF programs portable libbpf relies on the BTF type information of the
+running kernel. Kernel also exposes this self-describing authoritative BTF
+information through ``sysfs`` at ``/sys/kernel/btf/vmlinux``.
+
+You can generate the BTF information for the running kernel with the following
+command:
+
+::
+
+  $ bpftool btf dump file /sys/kernel/btf/vmlinux format c > vmlinux.h
+
+The command generates a ``vmlinux.h`` header file with all kernel types
+(:doc:`BTF types <../btf>`) that the running kernel uses. Including
+``vmlinux.h`` in your BPF program eliminates dependency on system-wide kernel
+headers.
+
+libbpf enables portability of BPF programs by looking at the BPF program’s
+recorded BTF type and relocation information and matching them to BTF
+information (vmlinux) provided by the running kernel. libbpf then resolves and
+matches all the types and fields, and updates necessary offsets and other
+relocatable data to ensure that BPF program’s logic functions correctly for a
+specific kernel on the host. BPF CO-RE concept thus eliminates overhead
+associated with BPF development and allows developers to write portable BPF
+applications without modifications and runtime source code compilation on the
+target machine.
+
+The following code snippet shows how to read the parent field of a kernel
+``task_struct`` using BPF CO-RE and libbf. The basic helper to read a field in a
+CO-RE relocatable manner is ``bpf_core_read(dst, sz, src)``, which will read
+``sz`` bytes from the field referenced by ``src`` into the memory pointed to by
+``dst``.
+
+.. code-block:: C
+   :emphasize-lines: 6
+
+    //...
+    struct task_struct *task = (void *)bpf_get_current_task();
+    struct task_struct *parent_task;
+    int err;
+
+    err = bpf_core_read(&parent_task, sizeof(void *), &task->parent);
+    if (err) {
+      /* handle error */
+    }
+
+    /* parent_task contains the value of task->parent pointer */
+
+In the code snippet, we first get a pointer to the current ``task_struct`` using
+``bpf_get_current_task()``.  We then use ``bpf_core_read()`` to read the parent
+field of task struct into the ``parent_task`` variable. ``bpf_core_read()`` is
+just like ``bpf_probe_read_kernel()`` BPF helper, except it records information
+about the field that should be relocated on the target kernel. i.e, if the
+``parent`` field gets shifted to a different offset within
+``struct task_struct`` due to some new field added in front of it, libbpf will
+automatically adjust the actual offset to the proper value.
+
+Getting Started with libbpf
+===========================
+
+Check out the `libbpf-bootstrap <https://github.com/libbpf/libbpf-bootstrap>`_
+repository with simple examples of using libbpf to build various BPF
+applications.
+
+See also `libbpf API documentation
+<https://libbpf.readthedocs.io/en/latest/api.html>`_.
+
+libbpf and Rust
+===============
+
+If you are building BPF applications in Rust, it is recommended to use the
+`Libbpf-rs <https://github.com/libbpf/libbpf-rs>`_ library instead of bindgen
+bindings directly to libbpf. Libbpf-rs wraps libbpf functionality in
+Rust-idiomatic interfaces and provides libbpf-cargo plugin to handle BPF code
+compilation and skeleton generation. Using Libbpf-rs will make building user
+space part of the BPF application easier. Note that the BPF program themselves
+must still be written in plain C.
+
+Additional Documentation
+========================
+
+* `Program types and ELF Sections <https://libbpf.readthedocs.io/en/latest/program_types.html>`_
+* `API naming convention <https://libbpf.readthedocs.io/en/latest/libbpf_naming_convention.html>`_
+* `Building libbpf <https://libbpf.readthedocs.io/en/latest/libbpf_build.html>`_
+* `API documentation Convention <https://libbpf.readthedocs.io/en/latest/libbpf_naming_convention.html#api-documentation-convention>`_
diff --git a/Documentation/bpf/libbpf/program_types.rst b/Documentation/bpf/libbpf/program_types.rst
new file mode 100644
index 000000000000..ad4d4d5eecb0
--- /dev/null
+++ b/Documentation/bpf/libbpf/program_types.rst
@@ -0,0 +1,203 @@
+.. SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause)
+
+.. _program_types_and_elf:
+
+Program Types and ELF Sections
+==============================
+
+The table below lists the program types, their attach types where relevant and the ELF section
+names supported by libbpf for them. The ELF section names follow these rules:
+
+- ``type`` is an exact match, e.g. ``SEC("socket")``
+- ``type+`` means it can be either exact ``SEC("type")`` or well-formed ``SEC("type/extras")``
+  with a '``/``' separator between ``type`` and ``extras``.
+
+When ``extras`` are specified, they provide details of how to auto-attach the BPF program.  The
+format of ``extras`` depends on the program type, e.g. ``SEC("tracepoint/<category>/<name>")``
+for tracepoints or ``SEC("usdt/<path>:<provider>:<name>")`` for USDT probes. The extras are
+described in more detail in the footnotes.
+
+
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| Program Type                              | Attach Type                            | ELF Section Name                 | Sleepable |
++===========================================+========================================+==================================+===========+
+| ``BPF_PROG_TYPE_CGROUP_DEVICE``           | ``BPF_CGROUP_DEVICE``                  | ``cgroup/dev``                   |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_CGROUP_SKB``              |                                        | ``cgroup/skb``                   |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_INET_EGRESS``             | ``cgroup_skb/egress``            |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_INET_INGRESS``            | ``cgroup_skb/ingress``           |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_CGROUP_SOCKOPT``          | ``BPF_CGROUP_GETSOCKOPT``              | ``cgroup/getsockopt``            |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_SETSOCKOPT``              | ``cgroup/setsockopt``            |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_CGROUP_SOCK_ADDR``        | ``BPF_CGROUP_INET4_BIND``              | ``cgroup/bind4``                 |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_INET4_CONNECT``           | ``cgroup/connect4``              |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_INET4_GETPEERNAME``       | ``cgroup/getpeername4``          |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_INET4_GETSOCKNAME``       | ``cgroup/getsockname4``          |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_INET6_BIND``              | ``cgroup/bind6``                 |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_INET6_CONNECT``           | ``cgroup/connect6``              |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_INET6_GETPEERNAME``       | ``cgroup/getpeername6``          |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_INET6_GETSOCKNAME``       | ``cgroup/getsockname6``          |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_UDP4_RECVMSG``            | ``cgroup/recvmsg4``              |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_UDP4_SENDMSG``            | ``cgroup/sendmsg4``              |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_UDP6_RECVMSG``            | ``cgroup/recvmsg6``              |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_UDP6_SENDMSG``            | ``cgroup/sendmsg6``              |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_CGROUP_SOCK``             | ``BPF_CGROUP_INET4_POST_BIND``         | ``cgroup/post_bind4``            |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_INET6_POST_BIND``         | ``cgroup/post_bind6``            |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_INET_SOCK_CREATE``        | ``cgroup/sock_create``           |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``cgroup/sock``                  |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_CGROUP_INET_SOCK_RELEASE``       | ``cgroup/sock_release``          |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_CGROUP_SYSCTL``           | ``BPF_CGROUP_SYSCTL``                  | ``cgroup/sysctl``                |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_EXT``                     |                                        | ``freplace+`` [#fentry]_         |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_FLOW_DISSECTOR``          | ``BPF_FLOW_DISSECTOR``                 | ``flow_dissector``               |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_KPROBE``                  |                                        | ``kprobe+`` [#kprobe]_           |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``kretprobe+`` [#kprobe]_        |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``ksyscall+`` [#ksyscall]_       |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        |  ``kretsyscall+`` [#ksyscall]_   |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``uprobe+`` [#uprobe]_           |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``uprobe.s+`` [#uprobe]_         | Yes       |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``uretprobe+`` [#uprobe]_        |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``uretprobe.s+`` [#uprobe]_      | Yes       |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``usdt+`` [#usdt]_               |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_TRACE_KPROBE_MULTI``             | ``kprobe.multi+`` [#kpmulti]_    |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``kretprobe.multi+`` [#kpmulti]_ |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_LIRC_MODE2``              | ``BPF_LIRC_MODE2``                     | ``lirc_mode2``                   |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_LSM``                     | ``BPF_LSM_CGROUP``                     | ``lsm_cgroup+``                  |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_LSM_MAC``                        | ``lsm+`` [#lsm]_                 |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``lsm.s+`` [#lsm]_               | Yes       |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_LWT_IN``                  |                                        | ``lwt_in``                       |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_LWT_OUT``                 |                                        | ``lwt_out``                      |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_LWT_SEG6LOCAL``           |                                        | ``lwt_seg6local``                |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_LWT_XMIT``                |                                        | ``lwt_xmit``                     |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_PERF_EVENT``              |                                        | ``perf_event``                   |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE`` |                                        | ``raw_tp.w+`` [#rawtp]_          |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``raw_tracepoint.w+``            |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_RAW_TRACEPOINT``          |                                        | ``raw_tp+`` [#rawtp]_            |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``raw_tracepoint+``              |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_SCHED_ACT``               |                                        | ``action``                       |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_SCHED_CLS``               |                                        | ``classifier``                   |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``tc``                           |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_SK_LOOKUP``               | ``BPF_SK_LOOKUP``                      | ``sk_lookup``                    |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_SK_MSG``                  | ``BPF_SK_MSG_VERDICT``                 | ``sk_msg``                       |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_SK_REUSEPORT``            | ``BPF_SK_REUSEPORT_SELECT_OR_MIGRATE`` | ``sk_reuseport/migrate``         |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_SK_REUSEPORT_SELECT``            | ``sk_reuseport``                 |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_SK_SKB``                  |                                        | ``sk_skb``                       |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_SK_SKB_STREAM_PARSER``           | ``sk_skb/stream_parser``         |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_SK_SKB_STREAM_VERDICT``          | ``sk_skb/stream_verdict``        |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_SOCKET_FILTER``           |                                        | ``socket``                       |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_SOCK_OPS``                | ``BPF_CGROUP_SOCK_OPS``                | ``sockops``                      |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_STRUCT_OPS``              |                                        | ``struct_ops+``                  |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_SYSCALL``                 |                                        | ``syscall``                      | Yes       |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_TRACEPOINT``              |                                        | ``tp+`` [#tp]_                   |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``tracepoint+`` [#tp]_           |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_TRACING``                 | ``BPF_MODIFY_RETURN``                  | ``fmod_ret+`` [#fentry]_         |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``fmod_ret.s+`` [#fentry]_       | Yes       |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_TRACE_FENTRY``                   | ``fentry+`` [#fentry]_           |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``fentry.s+`` [#fentry]_         | Yes       |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_TRACE_FEXIT``                    | ``fexit+`` [#fentry]_            |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``fexit.s+`` [#fentry]_          | Yes       |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_TRACE_ITER``                     | ``iter+`` [#iter]_               |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``iter.s+`` [#iter]_             | Yes       |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_TRACE_RAW_TP``                   | ``tp_btf+`` [#fentry]_           |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+| ``BPF_PROG_TYPE_XDP``                     | ``BPF_XDP_CPUMAP``                     | ``xdp.frags/cpumap``             |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``xdp/cpumap``                   |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_XDP_DEVMAP``                     | ``xdp.frags/devmap``             |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``xdp/devmap``                   |           |
++                                           +----------------------------------------+----------------------------------+-----------+
+|                                           | ``BPF_XDP``                            | ``xdp.frags``                    |           |
++                                           +                                        +----------------------------------+-----------+
+|                                           |                                        | ``xdp``                          |           |
++-------------------------------------------+----------------------------------------+----------------------------------+-----------+
+
+
+.. rubric:: Footnotes
+
+.. [#fentry] The ``fentry`` attach format is ``fentry[.s]/<function>``.
+.. [#kprobe] The ``kprobe`` attach format is ``kprobe/<function>[+<offset>]``. Valid
+             characters for ``function`` are ``a-zA-Z0-9_.`` and ``offset`` must be a valid
+             non-negative integer.
+.. [#ksyscall] The ``ksyscall`` attach format is ``ksyscall/<syscall>``.
+.. [#uprobe] The ``uprobe`` attach format is ``uprobe[.s]/<path>:<function>[+<offset>]``.
+.. [#usdt] The ``usdt`` attach format is ``usdt/<path>:<provider>:<name>``.
+.. [#kpmulti] The ``kprobe.multi`` attach format is ``kprobe.multi/<pattern>`` where ``pattern``
+              supports ``*`` and ``?`` wildcards. Valid characters for pattern are
+              ``a-zA-Z0-9_.*?``.
+.. [#lsm] The ``lsm`` attachment format is ``lsm[.s]/<hook>``.
+.. [#rawtp] The ``raw_tp`` attach format is ``raw_tracepoint[.w]/<tracepoint>``.
+.. [#tp] The ``tracepoint`` attach format is ``tracepoint/<category>/<name>``.
+.. [#iter] The ``iter`` attach format is ``iter[.s]/<struct-name>``.
diff --git a/Documentation/bpf/linux-notes.rst b/Documentation/bpf/linux-notes.rst
new file mode 100644
index 000000000000..508d009d3bed
--- /dev/null
+++ b/Documentation/bpf/linux-notes.rst
@@ -0,0 +1,83 @@
+.. contents::
+.. sectnum::
+
+==========================
+Linux implementation notes
+==========================
+
+This document provides more details specific to the Linux kernel implementation of the eBPF instruction set.
+
+Byte swap instructions
+======================
+
+``BPF_FROM_LE`` and ``BPF_FROM_BE`` exist as aliases for ``BPF_TO_LE`` and ``BPF_TO_BE`` respectively.
+
+Jump instructions
+=================
+
+``BPF_CALL | BPF_X | BPF_JMP`` (0x8d), where the helper function
+integer would be read from a specified register, is not currently supported
+by the verifier.  Any programs with this instruction will fail to load
+until such support is added.
+
+Maps
+====
+
+Linux only supports the 'map_val(map)' operation on array maps with a single element.
+
+Linux uses an fd_array to store maps associated with a BPF program. Thus,
+map_by_idx(imm) uses the fd at that index in the array.
+
+Variables
+=========
+
+The following 64-bit immediate instruction specifies that a variable address,
+which corresponds to some integer stored in the 'imm' field, should be loaded:
+
+=========================  ======  ===  =========================================  ===========  ==============
+opcode construction        opcode  src  pseudocode                                 imm type     dst type
+=========================  ======  ===  =========================================  ===========  ==============
+BPF_IMM | BPF_DW | BPF_LD  0x18    0x3  dst = var_addr(imm)                        variable id  data pointer
+=========================  ======  ===  =========================================  ===========  ==============
+
+On Linux, this integer is a BTF ID.
+
+Legacy BPF Packet access instructions
+=====================================
+
+As mentioned in the `ISA standard documentation <instruction-set.rst#legacy-bpf-packet-access-instructions>`_,
+Linux has special eBPF instructions for access to packet data that have been
+carried over from classic BPF to retain the performance of legacy socket
+filters running in the eBPF interpreter.
+
+The instructions come in two forms: ``BPF_ABS | <size> | BPF_LD`` and
+``BPF_IND | <size> | BPF_LD``.
+
+These instructions are used to access packet data and can only be used when
+the program context is a pointer to a networking packet.  ``BPF_ABS``
+accesses packet data at an absolute offset specified by the immediate data
+and ``BPF_IND`` access packet data at an offset that includes the value of
+a register in addition to the immediate data.
+
+These instructions have seven implicit operands:
+
+* Register R6 is an implicit input that must contain a pointer to a
+  struct sk_buff.
+* Register R0 is an implicit output which contains the data fetched from
+  the packet.
+* Registers R1-R5 are scratch registers that are clobbered by the
+  instruction.
+
+These instructions have an implicit program exit condition as well. If an
+eBPF program attempts access data beyond the packet boundary, the
+program execution will be aborted.
+
+``BPF_ABS | BPF_W | BPF_LD`` (0x20) means::
+
+  R0 = ntohl(*(u32 *) ((struct sk_buff *) R6->data + imm))
+
+where ``ntohl()`` converts a 32-bit value from network byte order to host byte order.
+
+``BPF_IND | BPF_W | BPF_LD`` (0x40) means::
+
+  R0 = ntohl(*(u32 *) ((struct sk_buff *) R6->data + src + imm))
diff --git a/Documentation/bpf/map_array.rst b/Documentation/bpf/map_array.rst
new file mode 100644
index 000000000000..f2f51a53e8ae
--- /dev/null
+++ b/Documentation/bpf/map_array.rst
@@ -0,0 +1,262 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright (C) 2022 Red Hat, Inc.
+
+================================================
+BPF_MAP_TYPE_ARRAY and BPF_MAP_TYPE_PERCPU_ARRAY
+================================================
+
+.. note::
+   - ``BPF_MAP_TYPE_ARRAY`` was introduced in kernel version 3.19
+   - ``BPF_MAP_TYPE_PERCPU_ARRAY`` was introduced in version 4.6
+
+``BPF_MAP_TYPE_ARRAY`` and ``BPF_MAP_TYPE_PERCPU_ARRAY`` provide generic array
+storage. The key type is an unsigned 32-bit integer (4 bytes) and the map is
+of constant size. The size of the array is defined in ``max_entries`` at
+creation time. All array elements are pre-allocated and zero initialized when
+created. ``BPF_MAP_TYPE_PERCPU_ARRAY`` uses a different memory region for each
+CPU whereas ``BPF_MAP_TYPE_ARRAY`` uses the same memory region. The value
+stored can be of any size, however, all array elements are aligned to 8
+bytes.
+
+Since kernel 5.5, memory mapping may be enabled for ``BPF_MAP_TYPE_ARRAY`` by
+setting the flag ``BPF_F_MMAPABLE``. The map definition is page-aligned and
+starts on the first page. Sufficient page-sized and page-aligned blocks of
+memory are allocated to store all array values, starting on the second page,
+which in some cases will result in over-allocation of memory. The benefit of
+using this is increased performance and ease of use since userspace programs
+would not be required to use helper functions to access and mutate data.
+
+Usage
+=====
+
+Kernel BPF
+----------
+
+bpf_map_lookup_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
+
+Array elements can be retrieved using the ``bpf_map_lookup_elem()`` helper.
+This helper returns a pointer into the array element, so to avoid data races
+with userspace reading the value, the user must use primitives like
+``__sync_fetch_and_add()`` when updating the value in-place.
+
+bpf_map_update_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags)
+
+Array elements can be updated using the ``bpf_map_update_elem()`` helper.
+
+``bpf_map_update_elem()`` returns 0 on success, or negative error in case of
+failure.
+
+Since the array is of constant size, ``bpf_map_delete_elem()`` is not supported.
+To clear an array element, you may use ``bpf_map_update_elem()`` to insert a
+zero value to that index.
+
+Per CPU Array
+-------------
+
+Values stored in ``BPF_MAP_TYPE_ARRAY`` can be accessed by multiple programs
+across different CPUs. To restrict storage to a single CPU, you may use a
+``BPF_MAP_TYPE_PERCPU_ARRAY``.
+
+When using a ``BPF_MAP_TYPE_PERCPU_ARRAY`` the ``bpf_map_update_elem()`` and
+``bpf_map_lookup_elem()`` helpers automatically access the slot for the current
+CPU.
+
+bpf_map_lookup_percpu_elem()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   void *bpf_map_lookup_percpu_elem(struct bpf_map *map, const void *key, u32 cpu)
+
+The ``bpf_map_lookup_percpu_elem()`` helper can be used to lookup the array
+value for a specific CPU. Returns value on success , or ``NULL`` if no entry was
+found or ``cpu`` is invalid.
+
+Concurrency
+-----------
+
+Since kernel version 5.1, the BPF infrastructure provides ``struct bpf_spin_lock``
+to synchronize access.
+
+Userspace
+---------
+
+Access from userspace uses libbpf APIs with the same names as above, with
+the map identified by its ``fd``.
+
+Examples
+========
+
+Please see the ``tools/testing/selftests/bpf`` directory for functional
+examples. The code samples below demonstrate API usage.
+
+Kernel BPF
+----------
+
+This snippet shows how to declare an array in a BPF program.
+
+.. code-block:: c
+
+    struct {
+            __uint(type, BPF_MAP_TYPE_ARRAY);
+            __type(key, u32);
+            __type(value, long);
+            __uint(max_entries, 256);
+    } my_map SEC(".maps");
+
+
+This example BPF program shows how to access an array element.
+
+.. code-block:: c
+
+    int bpf_prog(struct __sk_buff *skb)
+    {
+            struct iphdr ip;
+            int index;
+            long *value;
+
+            if (bpf_skb_load_bytes(skb, ETH_HLEN, &ip, sizeof(ip)) < 0)
+                    return 0;
+
+            index = ip.protocol;
+            value = bpf_map_lookup_elem(&my_map, &index);
+            if (value)
+                    __sync_fetch_and_add(value, skb->len);
+
+            return 0;
+    }
+
+Userspace
+---------
+
+BPF_MAP_TYPE_ARRAY
+~~~~~~~~~~~~~~~~~~
+
+This snippet shows how to create an array, using ``bpf_map_create_opts`` to
+set flags.
+
+.. code-block:: c
+
+    #include <bpf/libbpf.h>
+    #include <bpf/bpf.h>
+
+    int create_array()
+    {
+            int fd;
+            LIBBPF_OPTS(bpf_map_create_opts, opts, .map_flags = BPF_F_MMAPABLE);
+
+            fd = bpf_map_create(BPF_MAP_TYPE_ARRAY,
+                                "example_array",       /* name */
+                                sizeof(__u32),         /* key size */
+                                sizeof(long),          /* value size */
+                                256,                   /* max entries */
+                                &opts);                /* create opts */
+            return fd;
+    }
+
+This snippet shows how to initialize the elements of an array.
+
+.. code-block:: c
+
+    int initialize_array(int fd)
+    {
+            __u32 i;
+            long value;
+            int ret;
+
+            for (i = 0; i < 256; i++) {
+                    value = i;
+                    ret = bpf_map_update_elem(fd, &i, &value, BPF_ANY);
+                    if (ret < 0)
+                            return ret;
+            }
+
+            return ret;
+    }
+
+This snippet shows how to retrieve an element value from an array.
+
+.. code-block:: c
+
+    int lookup(int fd)
+    {
+            __u32 index = 42;
+            long value;
+            int ret;
+
+            ret = bpf_map_lookup_elem(fd, &index, &value);
+            if (ret < 0)
+                    return ret;
+
+            /* use value here */
+            assert(value == 42);
+
+            return ret;
+    }
+
+BPF_MAP_TYPE_PERCPU_ARRAY
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This snippet shows how to initialize the elements of a per CPU array.
+
+.. code-block:: c
+
+    int initialize_array(int fd)
+    {
+            int ncpus = libbpf_num_possible_cpus();
+            long values[ncpus];
+            __u32 i, j;
+            int ret;
+
+            for (i = 0; i < 256 ; i++) {
+                    for (j = 0; j < ncpus; j++)
+                            values[j] = i;
+                    ret = bpf_map_update_elem(fd, &i, &values, BPF_ANY);
+                    if (ret < 0)
+                            return ret;
+            }
+
+            return ret;
+    }
+
+This snippet shows how to access the per CPU elements of an array value.
+
+.. code-block:: c
+
+    int lookup(int fd)
+    {
+            int ncpus = libbpf_num_possible_cpus();
+            __u32 index = 42, j;
+            long values[ncpus];
+            int ret;
+
+            ret = bpf_map_lookup_elem(fd, &index, &values);
+            if (ret < 0)
+                    return ret;
+
+            for (j = 0; j < ncpus; j++) {
+                    /* Use per CPU value here */
+                    assert(values[j] == 42);
+            }
+
+            return ret;
+    }
+
+Semantics
+=========
+
+As shown in the example above, when accessing a ``BPF_MAP_TYPE_PERCPU_ARRAY``
+in userspace, each value is an array with ``ncpus`` elements.
+
+When calling ``bpf_map_update_elem()`` the flag ``BPF_NOEXIST`` can not be used
+for these maps.
diff --git a/Documentation/bpf/map_bloom_filter.rst b/Documentation/bpf/map_bloom_filter.rst
new file mode 100644
index 000000000000..c82487f2fe0d
--- /dev/null
+++ b/Documentation/bpf/map_bloom_filter.rst
@@ -0,0 +1,174 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright (C) 2022 Red Hat, Inc.
+
+=========================
+BPF_MAP_TYPE_BLOOM_FILTER
+=========================
+
+.. note::
+   - ``BPF_MAP_TYPE_BLOOM_FILTER`` was introduced in kernel version 5.16
+
+``BPF_MAP_TYPE_BLOOM_FILTER`` provides a BPF bloom filter map. Bloom
+filters are a space-efficient probabilistic data structure used to
+quickly test whether an element exists in a set. In a bloom filter,
+false positives are possible whereas false negatives are not.
+
+The bloom filter map does not have keys, only values. When the bloom
+filter map is created, it must be created with a ``key_size`` of 0.  The
+bloom filter map supports two operations:
+
+- push: adding an element to the map
+- peek: determining whether an element is present in the map
+
+BPF programs must use ``bpf_map_push_elem`` to add an element to the
+bloom filter map and ``bpf_map_peek_elem`` to query the map. These
+operations are exposed to userspace applications using the existing
+``bpf`` syscall in the following way:
+
+- ``BPF_MAP_UPDATE_ELEM`` -> push
+- ``BPF_MAP_LOOKUP_ELEM`` -> peek
+
+The ``max_entries`` size that is specified at map creation time is used
+to approximate a reasonable bitmap size for the bloom filter, and is not
+otherwise strictly enforced. If the user wishes to insert more entries
+into the bloom filter than ``max_entries``, this may lead to a higher
+false positive rate.
+
+The number of hashes to use for the bloom filter is configurable using
+the lower 4 bits of ``map_extra`` in ``union bpf_attr`` at map creation
+time. If no number is specified, the default used will be 5 hash
+functions. In general, using more hashes decreases both the false
+positive rate and the speed of a lookup.
+
+It is not possible to delete elements from a bloom filter map. A bloom
+filter map may be used as an inner map. The user is responsible for
+synchronising concurrent updates and lookups to ensure no false negative
+lookups occur.
+
+Usage
+=====
+
+Kernel BPF
+----------
+
+bpf_map_push_elem()
+~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   long bpf_map_push_elem(struct bpf_map *map, const void *value, u64 flags)
+
+A ``value`` can be added to a bloom filter using the
+``bpf_map_push_elem()`` helper. The ``flags`` parameter must be set to
+``BPF_ANY`` when adding an entry to the bloom filter. This helper
+returns ``0`` on success, or negative error in case of failure.
+
+bpf_map_peek_elem()
+~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   long bpf_map_peek_elem(struct bpf_map *map, void *value)
+
+The ``bpf_map_peek_elem()`` helper is used to determine whether
+``value`` is present in the bloom filter map. This helper returns ``0``
+if ``value`` is probably present in the map, or ``-ENOENT`` if ``value``
+is definitely not present in the map.
+
+Userspace
+---------
+
+bpf_map_update_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   int bpf_map_update_elem (int fd, const void *key, const void *value, __u64 flags)
+
+A userspace program can add a ``value`` to a bloom filter using libbpf's
+``bpf_map_update_elem`` function. The ``key`` parameter must be set to
+``NULL`` and ``flags`` must be set to ``BPF_ANY``. Returns ``0`` on
+success, or negative error in case of failure.
+
+bpf_map_lookup_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   int bpf_map_lookup_elem (int fd, const void *key, void *value)
+
+A userspace program can determine the presence of ``value`` in a bloom
+filter using libbpf's ``bpf_map_lookup_elem`` function. The ``key``
+parameter must be set to ``NULL``. Returns ``0`` if ``value`` is
+probably present in the map, or ``-ENOENT`` if ``value`` is definitely
+not present in the map.
+
+Examples
+========
+
+Kernel BPF
+----------
+
+This snippet shows how to declare a bloom filter in a BPF program:
+
+.. code-block:: c
+
+    struct {
+            __uint(type, BPF_MAP_TYPE_BLOOM_FILTER);
+            __type(value, __u32);
+            __uint(max_entries, 1000);
+            __uint(map_extra, 3);
+    } bloom_filter SEC(".maps");
+
+This snippet shows how to determine presence of a value in a bloom
+filter in a BPF program:
+
+.. code-block:: c
+
+    void *lookup(__u32 key)
+    {
+            if (bpf_map_peek_elem(&bloom_filter, &key) == 0) {
+                    /* Verify not a false positive and fetch an associated
+                     * value using a secondary lookup, e.g. in a hash table
+                     */
+                    return bpf_map_lookup_elem(&hash_table, &key);
+            }
+            return 0;
+    }
+
+Userspace
+---------
+
+This snippet shows how to use libbpf to create a bloom filter map from
+userspace:
+
+.. code-block:: c
+
+    int create_bloom()
+    {
+            LIBBPF_OPTS(bpf_map_create_opts, opts,
+                        .map_extra = 3);             /* number of hashes */
+
+            return bpf_map_create(BPF_MAP_TYPE_BLOOM_FILTER,
+                                  "ipv6_bloom",      /* name */
+                                  0,                 /* key size, must be zero */
+                                  sizeof(ipv6_addr), /* value size */
+                                  10000,             /* max entries */
+                                  &opts);            /* create options */
+    }
+
+This snippet shows how to add an element to a bloom filter from
+userspace:
+
+.. code-block:: c
+
+    int add_element(struct bpf_map *bloom_map, __u32 value)
+    {
+            int bloom_fd = bpf_map__fd(bloom_map);
+            return bpf_map_update_elem(bloom_fd, NULL, &value, BPF_ANY);
+    }
+
+References
+==========
+
+https://lwn.net/ml/bpf/20210831225005.2762202-1-joannekoong@fb.com/
diff --git a/Documentation/bpf/map_cgroup_storage.rst b/Documentation/bpf/map_cgroup_storage.rst
index cab9543017bf..8e5fe532c07e 100644
--- a/Documentation/bpf/map_cgroup_storage.rst
+++ b/Documentation/bpf/map_cgroup_storage.rst
@@ -31,7 +31,7 @@ The map uses key of type of either ``__u64 cgroup_inode_id`` or
     };
 
 ``cgroup_inode_id`` is the inode id of the cgroup directory.
-``attach_type`` is the the program's attach type.
+``attach_type`` is the program's attach type.
 
 Linux 5.9 added support for type ``__u64 cgroup_inode_id`` as the key type.
 When this key type is used, then all attach types of the particular cgroup and
@@ -155,7 +155,7 @@ However, the BPF program can still only associate with one map of each type
 ``BPF_MAP_TYPE_CGROUP_STORAGE`` or more than one
 ``BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE``.
 
-In all versions, userspace may use the the attach parameters of cgroup and
+In all versions, userspace may use the attach parameters of cgroup and
 attach type pair in ``struct bpf_cgroup_storage_key`` as the key to the BPF map
 APIs to read or update the storage for a given attachment. For Linux 5.9
 attach type shared storages, only the first value in the struct, cgroup inode
diff --git a/Documentation/bpf/map_cgrp_storage.rst b/Documentation/bpf/map_cgrp_storage.rst
new file mode 100644
index 000000000000..5d3f603efffa
--- /dev/null
+++ b/Documentation/bpf/map_cgrp_storage.rst
@@ -0,0 +1,109 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright (C) 2022 Meta Platforms, Inc. and affiliates.
+
+=========================
+BPF_MAP_TYPE_CGRP_STORAGE
+=========================
+
+The ``BPF_MAP_TYPE_CGRP_STORAGE`` map type represents a local fix-sized
+storage for cgroups. It is only available with ``CONFIG_CGROUPS``.
+The programs are made available by the same Kconfig. The
+data for a particular cgroup can be retrieved by looking up the map
+with that cgroup.
+
+This document describes the usage and semantics of the
+``BPF_MAP_TYPE_CGRP_STORAGE`` map type.
+
+Usage
+=====
+
+The map key must be ``sizeof(int)`` representing a cgroup fd.
+To access the storage in a program, use ``bpf_cgrp_storage_get``::
+
+    void *bpf_cgrp_storage_get(struct bpf_map *map, struct cgroup *cgroup, void *value, u64 flags)
+
+``flags`` could be 0 or ``BPF_LOCAL_STORAGE_GET_F_CREATE`` which indicates that
+a new local storage will be created if one does not exist.
+
+The local storage can be removed with ``bpf_cgrp_storage_delete``::
+
+    long bpf_cgrp_storage_delete(struct bpf_map *map, struct cgroup *cgroup)
+
+The map is available to all program types.
+
+Examples
+========
+
+A BPF program example with BPF_MAP_TYPE_CGRP_STORAGE::
+
+    #include <vmlinux.h>
+    #include <bpf/bpf_helpers.h>
+    #include <bpf/bpf_tracing.h>
+
+    struct {
+            __uint(type, BPF_MAP_TYPE_CGRP_STORAGE);
+            __uint(map_flags, BPF_F_NO_PREALLOC);
+            __type(key, int);
+            __type(value, long);
+    } cgrp_storage SEC(".maps");
+
+    SEC("tp_btf/sys_enter")
+    int BPF_PROG(on_enter, struct pt_regs *regs, long id)
+    {
+            struct task_struct *task = bpf_get_current_task_btf();
+            long *ptr;
+
+            ptr = bpf_cgrp_storage_get(&cgrp_storage, task->cgroups->dfl_cgrp, 0,
+                                       BPF_LOCAL_STORAGE_GET_F_CREATE);
+            if (ptr)
+                __sync_fetch_and_add(ptr, 1);
+
+            return 0;
+    }
+
+Userspace accessing map declared above::
+
+    #include <linux/bpf.h>
+    #include <linux/libbpf.h>
+
+    __u32 map_lookup(struct bpf_map *map, int cgrp_fd)
+    {
+            __u32 *value;
+            value = bpf_map_lookup_elem(bpf_map__fd(map), &cgrp_fd);
+            if (value)
+                return *value;
+            return 0;
+    }
+
+Difference Between BPF_MAP_TYPE_CGRP_STORAGE and BPF_MAP_TYPE_CGROUP_STORAGE
+============================================================================
+
+The old cgroup storage map ``BPF_MAP_TYPE_CGROUP_STORAGE`` has been marked as
+deprecated (renamed to ``BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED``). The new
+``BPF_MAP_TYPE_CGRP_STORAGE`` map should be used instead. The following
+illusates the main difference between ``BPF_MAP_TYPE_CGRP_STORAGE`` and
+``BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED``.
+
+(1). ``BPF_MAP_TYPE_CGRP_STORAGE`` can be used by all program types while
+     ``BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED`` is available only to cgroup program types
+     like BPF_CGROUP_INET_INGRESS or BPF_CGROUP_SOCK_OPS, etc.
+
+(2). ``BPF_MAP_TYPE_CGRP_STORAGE`` supports local storage for more than one
+     cgroup while ``BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED`` only supports one cgroup
+     which is attached by a BPF program.
+
+(3). ``BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED`` allocates local storage at attach time so
+     ``bpf_get_local_storage()`` always returns non-NULL local storage.
+     ``BPF_MAP_TYPE_CGRP_STORAGE`` allocates local storage at runtime so
+     it is possible that ``bpf_cgrp_storage_get()`` may return null local storage.
+     To avoid such null local storage issue, user space can do
+     ``bpf_map_update_elem()`` to pre-allocate local storage before a BPF program
+     is attached.
+
+(4). ``BPF_MAP_TYPE_CGRP_STORAGE`` supports deleting local storage by a BPF program
+     while ``BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED`` only deletes storage during
+     prog detach time.
+
+So overall, ``BPF_MAP_TYPE_CGRP_STORAGE`` supports all ``BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED``
+functionality and beyond. It is recommended to use ``BPF_MAP_TYPE_CGRP_STORAGE``
+instead of ``BPF_MAP_TYPE_CGROUP_STORAGE_DEPRECATED``.
diff --git a/Documentation/bpf/map_cpumap.rst b/Documentation/bpf/map_cpumap.rst
new file mode 100644
index 000000000000..923cfc8ab51f
--- /dev/null
+++ b/Documentation/bpf/map_cpumap.rst
@@ -0,0 +1,177 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright (C) 2022 Red Hat, Inc.
+
+===================
+BPF_MAP_TYPE_CPUMAP
+===================
+
+.. note::
+   - ``BPF_MAP_TYPE_CPUMAP`` was introduced in kernel version 4.15
+
+.. kernel-doc:: kernel/bpf/cpumap.c
+ :doc: cpu map
+
+An example use-case for this map type is software based Receive Side Scaling (RSS).
+
+The CPUMAP represents the CPUs in the system indexed as the map-key, and the
+map-value is the config setting (per CPUMAP entry). Each CPUMAP entry has a dedicated
+kernel thread bound to the given CPU to represent the remote CPU execution unit.
+
+Starting from Linux kernel version 5.9 the CPUMAP can run a second XDP program
+on the remote CPU. This allows an XDP program to split its processing across
+multiple CPUs. For example, a scenario where the initial CPU (that sees/receives
+the packets) needs to do minimal packet processing and the remote CPU (to which
+the packet is directed) can afford to spend more cycles processing the frame. The
+initial CPU is where the XDP redirect program is executed. The remote CPU
+receives raw ``xdp_frame`` objects.
+
+Usage
+=====
+
+Kernel BPF
+----------
+bpf_redirect_map()
+^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+     long bpf_redirect_map(struct bpf_map *map, u32 key, u64 flags)
+
+Redirect the packet to the endpoint referenced by ``map`` at index ``key``.
+For ``BPF_MAP_TYPE_CPUMAP`` this map contains references to CPUs.
+
+The lower two bits of ``flags`` are used as the return code if the map lookup
+fails. This is so that the return value can be one of the XDP program return
+codes up to ``XDP_TX``, as chosen by the caller.
+
+User space
+----------
+.. note::
+    CPUMAP entries can only be updated/looked up/deleted from user space and not
+    from an eBPF program. Trying to call these functions from a kernel eBPF
+    program will result in the program failing to load and a verifier warning.
+
+bpf_map_update_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    int bpf_map_update_elem(int fd, const void *key, const void *value, __u64 flags);
+
+CPU entries can be added or updated using the ``bpf_map_update_elem()``
+helper. This helper replaces existing elements atomically. The ``value`` parameter
+can be ``struct bpf_cpumap_val``.
+
+ .. code-block:: c
+
+    struct bpf_cpumap_val {
+        __u32 qsize;  /* queue size to remote target CPU */
+        union {
+            int   fd; /* prog fd on map write */
+            __u32 id; /* prog id on map read */
+        } bpf_prog;
+    };
+
+The flags argument can be one of the following:
+  - BPF_ANY: Create a new element or update an existing element.
+  - BPF_NOEXIST: Create a new element only if it did not exist.
+  - BPF_EXIST: Update an existing element.
+
+bpf_map_lookup_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    int bpf_map_lookup_elem(int fd, const void *key, void *value);
+
+CPU entries can be retrieved using the ``bpf_map_lookup_elem()``
+helper.
+
+bpf_map_delete_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    int bpf_map_delete_elem(int fd, const void *key);
+
+CPU entries can be deleted using the ``bpf_map_delete_elem()``
+helper. This helper will return 0 on success, or negative error in case of
+failure.
+
+Examples
+========
+Kernel
+------
+
+The following code snippet shows how to declare a ``BPF_MAP_TYPE_CPUMAP`` called
+``cpu_map`` and how to redirect packets to a remote CPU using a round robin scheme.
+
+.. code-block:: c
+
+   struct {
+        __uint(type, BPF_MAP_TYPE_CPUMAP);
+        __type(key, __u32);
+        __type(value, struct bpf_cpumap_val);
+        __uint(max_entries, 12);
+    } cpu_map SEC(".maps");
+
+    struct {
+        __uint(type, BPF_MAP_TYPE_ARRAY);
+        __type(key, __u32);
+        __type(value, __u32);
+        __uint(max_entries, 12);
+    } cpus_available SEC(".maps");
+
+    struct {
+        __uint(type, BPF_MAP_TYPE_PERCPU_ARRAY);
+        __type(key, __u32);
+        __type(value, __u32);
+        __uint(max_entries, 1);
+    } cpus_iterator SEC(".maps");
+
+    SEC("xdp")
+    int  xdp_redir_cpu_round_robin(struct xdp_md *ctx)
+    {
+        __u32 key = 0;
+        __u32 cpu_dest = 0;
+        __u32 *cpu_selected, *cpu_iterator;
+        __u32 cpu_idx;
+
+        cpu_iterator = bpf_map_lookup_elem(&cpus_iterator, &key);
+        if (!cpu_iterator)
+            return XDP_ABORTED;
+        cpu_idx = *cpu_iterator;
+
+        *cpu_iterator += 1;
+        if (*cpu_iterator == bpf_num_possible_cpus())
+            *cpu_iterator = 0;
+
+        cpu_selected = bpf_map_lookup_elem(&cpus_available, &cpu_idx);
+        if (!cpu_selected)
+            return XDP_ABORTED;
+        cpu_dest = *cpu_selected;
+
+        if (cpu_dest >= bpf_num_possible_cpus())
+            return XDP_ABORTED;
+
+        return bpf_redirect_map(&cpu_map, cpu_dest, 0);
+    }
+
+User space
+----------
+
+The following code snippet shows how to dynamically set the max_entries for a
+CPUMAP to the max number of cpus available on the system.
+
+.. code-block:: c
+
+    int set_max_cpu_entries(struct bpf_map *cpu_map)
+    {
+        if (bpf_map__set_max_entries(cpu_map, libbpf_num_possible_cpus()) < 0) {
+            fprintf(stderr, "Failed to set max entries for cpu_map map: %s",
+                strerror(errno));
+            return -1;
+        }
+        return 0;
+    }
+
+References
+===========
+
+- https://developers.redhat.com/blog/2021/05/13/receive-side-scaling-rss-with-ebpf-and-cpumap#redirecting_into_a_cpumap
diff --git a/Documentation/bpf/map_devmap.rst b/Documentation/bpf/map_devmap.rst
new file mode 100644
index 000000000000..927312c7b8c8
--- /dev/null
+++ b/Documentation/bpf/map_devmap.rst
@@ -0,0 +1,238 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright (C) 2022 Red Hat, Inc.
+
+=================================================
+BPF_MAP_TYPE_DEVMAP and BPF_MAP_TYPE_DEVMAP_HASH
+=================================================
+
+.. note::
+   - ``BPF_MAP_TYPE_DEVMAP`` was introduced in kernel version 4.14
+   - ``BPF_MAP_TYPE_DEVMAP_HASH`` was introduced in kernel version 5.4
+
+``BPF_MAP_TYPE_DEVMAP`` and ``BPF_MAP_TYPE_DEVMAP_HASH`` are BPF maps primarily
+used as backend maps for the XDP BPF helper call ``bpf_redirect_map()``.
+``BPF_MAP_TYPE_DEVMAP`` is backed by an array that uses the key as
+the index to lookup a reference to a net device. While ``BPF_MAP_TYPE_DEVMAP_HASH``
+is backed by a hash table that uses a key to lookup a reference to a net device.
+The user provides either <``key``/ ``ifindex``> or <``key``/ ``struct bpf_devmap_val``>
+pairs to update the maps with new net devices.
+
+.. note::
+    - The key to a hash map doesn't have to be an ``ifindex``.
+    - While ``BPF_MAP_TYPE_DEVMAP_HASH`` allows for densely packing the net devices
+      it comes at the cost of a hash of the key when performing a look up.
+
+The setup and packet enqueue/send code is shared between the two types of
+devmap; only the lookup and insertion is different.
+
+Usage
+=====
+Kernel BPF
+----------
+bpf_redirect_map()
+^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    long bpf_redirect_map(struct bpf_map *map, u32 key, u64 flags)
+
+Redirect the packet to the endpoint referenced by ``map`` at index ``key``.
+For ``BPF_MAP_TYPE_DEVMAP`` and ``BPF_MAP_TYPE_DEVMAP_HASH`` this map contains
+references to net devices (for forwarding packets through other ports).
+
+The lower two bits of *flags* are used as the return code if the map lookup
+fails. This is so that the return value can be one of the XDP program return
+codes up to ``XDP_TX``, as chosen by the caller. The higher bits of ``flags``
+can be set to ``BPF_F_BROADCAST`` or ``BPF_F_EXCLUDE_INGRESS`` as defined
+below.
+
+With ``BPF_F_BROADCAST`` the packet will be broadcast to all the interfaces
+in the map, with ``BPF_F_EXCLUDE_INGRESS`` the ingress interface will be excluded
+from the broadcast.
+
+.. note::
+    - The key is ignored if BPF_F_BROADCAST is set.
+    - The broadcast feature can also be used to implement multicast forwarding:
+      simply create multiple DEVMAPs, each one corresponding to a single multicast group.
+
+This helper will return ``XDP_REDIRECT`` on success, or the value of the two
+lower bits of the ``flags`` argument if the map lookup fails.
+
+More information about redirection can be found :doc:`redirect`
+
+bpf_map_lookup_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+   void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
+
+Net device entries can be retrieved using the ``bpf_map_lookup_elem()``
+helper.
+
+User space
+----------
+.. note::
+    DEVMAP entries can only be updated/deleted from user space and not
+    from an eBPF program. Trying to call these functions from a kernel eBPF
+    program will result in the program failing to load and a verifier warning.
+
+bpf_map_update_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+   int bpf_map_update_elem(int fd, const void *key, const void *value, __u64 flags);
+
+Net device entries can be added or updated using the ``bpf_map_update_elem()``
+helper. This helper replaces existing elements atomically. The ``value`` parameter
+can be ``struct bpf_devmap_val`` or a simple ``int ifindex`` for backwards
+compatibility.
+
+ .. code-block:: c
+
+    struct bpf_devmap_val {
+        __u32 ifindex;   /* device index */
+        union {
+            int   fd;  /* prog fd on map write */
+            __u32 id;  /* prog id on map read */
+        } bpf_prog;
+    };
+
+The ``flags`` argument can be one of the following:
+  - ``BPF_ANY``: Create a new element or update an existing element.
+  - ``BPF_NOEXIST``: Create a new element only if it did not exist.
+  - ``BPF_EXIST``: Update an existing element.
+
+DEVMAPs can associate a program with a device entry by adding a ``bpf_prog.fd``
+to ``struct bpf_devmap_val``. Programs are run after ``XDP_REDIRECT`` and have
+access to both Rx device and Tx device. The  program associated with the ``fd``
+must have type XDP with expected attach type ``xdp_devmap``.
+When a program is associated with a device index, the program is run on an
+``XDP_REDIRECT`` and before the buffer is added to the per-cpu queue. Examples
+of how to attach/use xdp_devmap progs can be found in the kernel selftests:
+
+- ``tools/testing/selftests/bpf/prog_tests/xdp_devmap_attach.c``
+- ``tools/testing/selftests/bpf/progs/test_xdp_with_devmap_helpers.c``
+
+bpf_map_lookup_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+.. c:function::
+   int bpf_map_lookup_elem(int fd, const void *key, void *value);
+
+Net device entries can be retrieved using the ``bpf_map_lookup_elem()``
+helper.
+
+bpf_map_delete_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+.. c:function::
+   int bpf_map_delete_elem(int fd, const void *key);
+
+Net device entries can be deleted using the ``bpf_map_delete_elem()``
+helper. This helper will return 0 on success, or negative error in case of
+failure.
+
+Examples
+========
+
+Kernel BPF
+----------
+
+The following code snippet shows how to declare a ``BPF_MAP_TYPE_DEVMAP``
+called tx_port.
+
+.. code-block:: c
+
+    struct {
+        __uint(type, BPF_MAP_TYPE_DEVMAP);
+        __type(key, __u32);
+        __type(value, __u32);
+        __uint(max_entries, 256);
+    } tx_port SEC(".maps");
+
+The following code snippet shows how to declare a ``BPF_MAP_TYPE_DEVMAP_HASH``
+called forward_map.
+
+.. code-block:: c
+
+    struct {
+        __uint(type, BPF_MAP_TYPE_DEVMAP_HASH);
+        __type(key, __u32);
+        __type(value, struct bpf_devmap_val);
+        __uint(max_entries, 32);
+    } forward_map SEC(".maps");
+
+.. note::
+
+    The value type in the DEVMAP above is a ``struct bpf_devmap_val``
+
+The following code snippet shows a simple xdp_redirect_map program. This program
+would work with a user space program that populates the devmap ``forward_map`` based
+on ingress ifindexes. The BPF program (below) is redirecting packets using the
+ingress ``ifindex`` as the ``key``.
+
+.. code-block:: c
+
+    SEC("xdp")
+    int xdp_redirect_map_func(struct xdp_md *ctx)
+    {
+        int index = ctx->ingress_ifindex;
+
+        return bpf_redirect_map(&forward_map, index, 0);
+    }
+
+The following code snippet shows a BPF program that is broadcasting packets to
+all the interfaces in the ``tx_port`` devmap.
+
+.. code-block:: c
+
+    SEC("xdp")
+    int xdp_redirect_map_func(struct xdp_md *ctx)
+    {
+        return bpf_redirect_map(&tx_port, 0, BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS);
+    }
+
+User space
+----------
+
+The following code snippet shows how to update a devmap called ``tx_port``.
+
+.. code-block:: c
+
+    int update_devmap(int ifindex, int redirect_ifindex)
+    {
+        int ret;
+
+        ret = bpf_map_update_elem(bpf_map__fd(tx_port), &ifindex, &redirect_ifindex, 0);
+        if (ret < 0) {
+            fprintf(stderr, "Failed to update devmap_ value: %s\n",
+                strerror(errno));
+        }
+
+        return ret;
+    }
+
+The following code snippet shows how to update a hash_devmap called ``forward_map``.
+
+.. code-block:: c
+
+    int update_devmap(int ifindex, int redirect_ifindex)
+    {
+        struct bpf_devmap_val devmap_val = { .ifindex = redirect_ifindex };
+        int ret;
+
+        ret = bpf_map_update_elem(bpf_map__fd(forward_map), &ifindex, &devmap_val, 0);
+        if (ret < 0) {
+            fprintf(stderr, "Failed to update devmap_ value: %s\n",
+                strerror(errno));
+        }
+        return ret;
+    }
+
+References
+===========
+
+- https://lwn.net/Articles/728146/
+- https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git/commit/?id=6f9d451ab1a33728adb72d7ff66a7b374d665176
+- https://elixir.bootlin.com/linux/latest/source/net/core/filter.c#L4106
diff --git a/Documentation/bpf/map_hash.rst b/Documentation/bpf/map_hash.rst
new file mode 100644
index 000000000000..8669426264c6
--- /dev/null
+++ b/Documentation/bpf/map_hash.rst
@@ -0,0 +1,208 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright (C) 2022 Red Hat, Inc.
+
+===============================================
+BPF_MAP_TYPE_HASH, with PERCPU and LRU Variants
+===============================================
+
+.. note::
+   - ``BPF_MAP_TYPE_HASH`` was introduced in kernel version 3.19
+   - ``BPF_MAP_TYPE_PERCPU_HASH`` was introduced in version 4.6
+   - Both ``BPF_MAP_TYPE_LRU_HASH`` and ``BPF_MAP_TYPE_LRU_PERCPU_HASH``
+     were introduced in version 4.10
+
+``BPF_MAP_TYPE_HASH`` and ``BPF_MAP_TYPE_PERCPU_HASH`` provide general
+purpose hash map storage. Both the key and the value can be structs,
+allowing for composite keys and values.
+
+The kernel is responsible for allocating and freeing key/value pairs, up
+to the max_entries limit that you specify. Hash maps use pre-allocation
+of hash table elements by default. The ``BPF_F_NO_PREALLOC`` flag can be
+used to disable pre-allocation when it is too memory expensive.
+
+``BPF_MAP_TYPE_PERCPU_HASH`` provides a separate value slot per
+CPU. The per-cpu values are stored internally in an array.
+
+The ``BPF_MAP_TYPE_LRU_HASH`` and ``BPF_MAP_TYPE_LRU_PERCPU_HASH``
+variants add LRU semantics to their respective hash tables. An LRU hash
+will automatically evict the least recently used entries when the hash
+table reaches capacity. An LRU hash maintains an internal LRU list that
+is used to select elements for eviction. This internal LRU list is
+shared across CPUs but it is possible to request a per CPU LRU list with
+the ``BPF_F_NO_COMMON_LRU`` flag when calling ``bpf_map_create``.
+
+Usage
+=====
+
+Kernel BPF
+----------
+
+bpf_map_update_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags)
+
+Hash entries can be added or updated using the ``bpf_map_update_elem()``
+helper. This helper replaces existing elements atomically. The ``flags``
+parameter can be used to control the update behaviour:
+
+- ``BPF_ANY`` will create a new element or update an existing element
+- ``BPF_NOEXIST`` will create a new element only if one did not already
+  exist
+- ``BPF_EXIST`` will update an existing element
+
+``bpf_map_update_elem()`` returns 0 on success, or negative error in
+case of failure.
+
+bpf_map_lookup_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
+
+Hash entries can be retrieved using the ``bpf_map_lookup_elem()``
+helper. This helper returns a pointer to the value associated with
+``key``, or ``NULL`` if no entry was found.
+
+bpf_map_delete_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   long bpf_map_delete_elem(struct bpf_map *map, const void *key)
+
+Hash entries can be deleted using the ``bpf_map_delete_elem()``
+helper. This helper will return 0 on success, or negative error in case
+of failure.
+
+Per CPU Hashes
+--------------
+
+For ``BPF_MAP_TYPE_PERCPU_HASH`` and ``BPF_MAP_TYPE_LRU_PERCPU_HASH``
+the ``bpf_map_update_elem()`` and ``bpf_map_lookup_elem()`` helpers
+automatically access the hash slot for the current CPU.
+
+bpf_map_lookup_percpu_elem()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   void *bpf_map_lookup_percpu_elem(struct bpf_map *map, const void *key, u32 cpu)
+
+The ``bpf_map_lookup_percpu_elem()`` helper can be used to lookup the
+value in the hash slot for a specific CPU. Returns value associated with
+``key`` on ``cpu`` , or ``NULL`` if no entry was found or ``cpu`` is
+invalid.
+
+Concurrency
+-----------
+
+Values stored in ``BPF_MAP_TYPE_HASH`` can be accessed concurrently by
+programs running on different CPUs.  Since Kernel version 5.1, the BPF
+infrastructure provides ``struct bpf_spin_lock`` to synchronise access.
+See ``tools/testing/selftests/bpf/progs/test_spin_lock.c``.
+
+Userspace
+---------
+
+bpf_map_get_next_key()
+~~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   int bpf_map_get_next_key(int fd, const void *cur_key, void *next_key)
+
+In userspace, it is possible to iterate through the keys of a hash using
+libbpf's ``bpf_map_get_next_key()`` function. The first key can be fetched by
+calling ``bpf_map_get_next_key()`` with ``cur_key`` set to
+``NULL``. Subsequent calls will fetch the next key that follows the
+current key. ``bpf_map_get_next_key()`` returns 0 on success, -ENOENT if
+cur_key is the last key in the hash, or negative error in case of
+failure.
+
+Note that if ``cur_key`` gets deleted then ``bpf_map_get_next_key()``
+will instead return the *first* key in the hash table which is
+undesirable. It is recommended to use batched lookup if there is going
+to be key deletion intermixed with ``bpf_map_get_next_key()``.
+
+Examples
+========
+
+Please see the ``tools/testing/selftests/bpf`` directory for functional
+examples.  The code snippets below demonstrates API usage.
+
+This example shows how to declare an LRU Hash with a struct key and a
+struct value.
+
+.. code-block:: c
+
+    #include <linux/bpf.h>
+    #include <bpf/bpf_helpers.h>
+
+    struct key {
+        __u32 srcip;
+    };
+
+    struct value {
+        __u64 packets;
+        __u64 bytes;
+    };
+
+    struct {
+            __uint(type, BPF_MAP_TYPE_LRU_HASH);
+            __uint(max_entries, 32);
+            __type(key, struct key);
+            __type(value, struct value);
+    } packet_stats SEC(".maps");
+
+This example shows how to create or update hash values using atomic
+instructions:
+
+.. code-block:: c
+
+    static void update_stats(__u32 srcip, int bytes)
+    {
+            struct key key = {
+                    .srcip = srcip,
+            };
+            struct value *value = bpf_map_lookup_elem(&packet_stats, &key);
+
+            if (value) {
+                    __sync_fetch_and_add(&value->packets, 1);
+                    __sync_fetch_and_add(&value->bytes, bytes);
+            } else {
+                    struct value newval = { 1, bytes };
+
+                    bpf_map_update_elem(&packet_stats, &key, &newval, BPF_NOEXIST);
+            }
+    }
+
+Userspace walking the map elements from the map declared above:
+
+.. code-block:: c
+
+    #include <bpf/libbpf.h>
+    #include <bpf/bpf.h>
+
+    static void walk_hash_elements(int map_fd)
+    {
+            struct key *cur_key = NULL;
+            struct key next_key;
+            struct value value;
+            int err;
+
+            for (;;) {
+                    err = bpf_map_get_next_key(map_fd, cur_key, &next_key);
+                    if (err)
+                            break;
+
+                    bpf_map_lookup_elem(map_fd, &next_key, &value);
+
+                    // Use key and value here
+
+                    cur_key = &next_key;
+            }
+    }
diff --git a/Documentation/bpf/map_lpm_trie.rst b/Documentation/bpf/map_lpm_trie.rst
new file mode 100644
index 000000000000..74d64a30f500
--- /dev/null
+++ b/Documentation/bpf/map_lpm_trie.rst
@@ -0,0 +1,197 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright (C) 2022 Red Hat, Inc.
+
+=====================
+BPF_MAP_TYPE_LPM_TRIE
+=====================
+
+.. note::
+   - ``BPF_MAP_TYPE_LPM_TRIE`` was introduced in kernel version 4.11
+
+``BPF_MAP_TYPE_LPM_TRIE`` provides a longest prefix match algorithm that
+can be used to match IP addresses to a stored set of prefixes.
+Internally, data is stored in an unbalanced trie of nodes that uses
+``prefixlen,data`` pairs as its keys. The ``data`` is interpreted in
+network byte order, i.e. big endian, so ``data[0]`` stores the most
+significant byte.
+
+LPM tries may be created with a maximum prefix length that is a multiple
+of 8, in the range from 8 to 2048. The key used for lookup and update
+operations is a ``struct bpf_lpm_trie_key``, extended by
+``max_prefixlen/8`` bytes.
+
+- For IPv4 addresses the data length is 4 bytes
+- For IPv6 addresses the data length is 16 bytes
+
+The value type stored in the LPM trie can be any user defined type.
+
+.. note::
+   When creating a map of type ``BPF_MAP_TYPE_LPM_TRIE`` you must set the
+   ``BPF_F_NO_PREALLOC`` flag.
+
+Usage
+=====
+
+Kernel BPF
+----------
+
+bpf_map_lookup_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
+
+The longest prefix entry for a given data value can be found using the
+``bpf_map_lookup_elem()`` helper. This helper returns a pointer to the
+value associated with the longest matching ``key``, or ``NULL`` if no
+entry was found.
+
+The ``key`` should have ``prefixlen`` set to ``max_prefixlen`` when
+performing longest prefix lookups. For example, when searching for the
+longest prefix match for an IPv4 address, ``prefixlen`` should be set to
+``32``.
+
+bpf_map_update_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags)
+
+Prefix entries can be added or updated using the ``bpf_map_update_elem()``
+helper. This helper replaces existing elements atomically.
+
+``bpf_map_update_elem()`` returns ``0`` on success, or negative error in
+case of failure.
+
+ .. note::
+    The flags parameter must be one of BPF_ANY, BPF_NOEXIST or BPF_EXIST,
+    but the value is ignored, giving BPF_ANY semantics.
+
+bpf_map_delete_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   long bpf_map_delete_elem(struct bpf_map *map, const void *key)
+
+Prefix entries can be deleted using the ``bpf_map_delete_elem()``
+helper. This helper will return 0 on success, or negative error in case
+of failure.
+
+Userspace
+---------
+
+Access from userspace uses libbpf APIs with the same names as above, with
+the map identified by ``fd``.
+
+bpf_map_get_next_key()
+~~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   int bpf_map_get_next_key (int fd, const void *cur_key, void *next_key)
+
+A userspace program can iterate through the entries in an LPM trie using
+libbpf's ``bpf_map_get_next_key()`` function. The first key can be
+fetched by calling ``bpf_map_get_next_key()`` with ``cur_key`` set to
+``NULL``. Subsequent calls will fetch the next key that follows the
+current key. ``bpf_map_get_next_key()`` returns ``0`` on success,
+``-ENOENT`` if ``cur_key`` is the last key in the trie, or negative
+error in case of failure.
+
+``bpf_map_get_next_key()`` will iterate through the LPM trie elements
+from leftmost leaf first. This means that iteration will return more
+specific keys before less specific ones.
+
+Examples
+========
+
+Please see ``tools/testing/selftests/bpf/test_lpm_map.c`` for examples
+of LPM trie usage from userspace. The code snippets below demonstrate
+API usage.
+
+Kernel BPF
+----------
+
+The following BPF code snippet shows how to declare a new LPM trie for IPv4
+address prefixes:
+
+.. code-block:: c
+
+    #include <linux/bpf.h>
+    #include <bpf/bpf_helpers.h>
+
+    struct ipv4_lpm_key {
+            __u32 prefixlen;
+            __u32 data;
+    };
+
+    struct {
+            __uint(type, BPF_MAP_TYPE_LPM_TRIE);
+            __type(key, struct ipv4_lpm_key);
+            __type(value, __u32);
+            __uint(map_flags, BPF_F_NO_PREALLOC);
+            __uint(max_entries, 255);
+    } ipv4_lpm_map SEC(".maps");
+
+The following BPF code snippet shows how to lookup by IPv4 address:
+
+.. code-block:: c
+
+    void *lookup(__u32 ipaddr)
+    {
+            struct ipv4_lpm_key key = {
+                    .prefixlen = 32,
+                    .data = ipaddr
+            };
+
+            return bpf_map_lookup_elem(&ipv4_lpm_map, &key);
+    }
+
+Userspace
+---------
+
+The following snippet shows how to insert an IPv4 prefix entry into an
+LPM trie:
+
+.. code-block:: c
+
+    int add_prefix_entry(int lpm_fd, __u32 addr, __u32 prefixlen, struct value *value)
+    {
+            struct ipv4_lpm_key ipv4_key = {
+                    .prefixlen = prefixlen,
+                    .data = addr
+            };
+            return bpf_map_update_elem(lpm_fd, &ipv4_key, value, BPF_ANY);
+    }
+
+The following snippet shows a userspace program walking through the entries
+of an LPM trie:
+
+
+.. code-block:: c
+
+    #include <bpf/libbpf.h>
+    #include <bpf/bpf.h>
+
+    void iterate_lpm_trie(int map_fd)
+    {
+            struct ipv4_lpm_key *cur_key = NULL;
+            struct ipv4_lpm_key next_key;
+            struct value value;
+            int err;
+
+            for (;;) {
+                    err = bpf_map_get_next_key(map_fd, cur_key, &next_key);
+                    if (err)
+                            break;
+
+                    bpf_map_lookup_elem(map_fd, &next_key, &value);
+
+                    /* Use key and value here */
+
+                    cur_key = &next_key;
+            }
+    }
diff --git a/Documentation/bpf/map_of_maps.rst b/Documentation/bpf/map_of_maps.rst
new file mode 100644
index 000000000000..7b5617c2d017
--- /dev/null
+++ b/Documentation/bpf/map_of_maps.rst
@@ -0,0 +1,130 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright (C) 2022 Red Hat, Inc.
+
+========================================================
+BPF_MAP_TYPE_ARRAY_OF_MAPS and BPF_MAP_TYPE_HASH_OF_MAPS
+========================================================
+
+.. note::
+   - ``BPF_MAP_TYPE_ARRAY_OF_MAPS`` and ``BPF_MAP_TYPE_HASH_OF_MAPS`` were
+     introduced in kernel version 4.12
+
+``BPF_MAP_TYPE_ARRAY_OF_MAPS`` and ``BPF_MAP_TYPE_HASH_OF_MAPS`` provide general
+purpose support for map in map storage. One level of nesting is supported, where
+an outer map contains instances of a single type of inner map, for example
+``array_of_maps->sock_map``.
+
+When creating an outer map, an inner map instance is used to initialize the
+metadata that the outer map holds about its inner maps. This inner map has a
+separate lifetime from the outer map and can be deleted after the outer map has
+been created.
+
+The outer map supports element lookup, update and delete from user space using
+the syscall API. A BPF program is only allowed to do element lookup in the outer
+map.
+
+.. note::
+   - Multi-level nesting is not supported.
+   - Any BPF map type can be used as an inner map, except for
+     ``BPF_MAP_TYPE_PROG_ARRAY``.
+   - A BPF program cannot update or delete outer map entries.
+
+For ``BPF_MAP_TYPE_ARRAY_OF_MAPS`` the key is an unsigned 32-bit integer index
+into the array. The array is a fixed size with ``max_entries`` elements that are
+zero initialized when created.
+
+For ``BPF_MAP_TYPE_HASH_OF_MAPS`` the key type can be chosen when defining the
+map. The kernel is responsible for allocating and freeing key/value pairs, up to
+the max_entries limit that you specify. Hash maps use pre-allocation of hash
+table elements by default. The ``BPF_F_NO_PREALLOC`` flag can be used to disable
+pre-allocation when it is too memory expensive.
+
+Usage
+=====
+
+Kernel BPF Helper
+-----------------
+
+bpf_map_lookup_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
+
+Inner maps can be retrieved using the ``bpf_map_lookup_elem()`` helper. This
+helper returns a pointer to the inner map, or ``NULL`` if no entry was found.
+
+Examples
+========
+
+Kernel BPF Example
+------------------
+
+This snippet shows how to create and initialise an array of devmaps in a BPF
+program. Note that the outer array can only be modified from user space using
+the syscall API.
+
+.. code-block:: c
+
+    struct inner_map {
+            __uint(type, BPF_MAP_TYPE_DEVMAP);
+            __uint(max_entries, 10);
+            __type(key, __u32);
+            __type(value, __u32);
+    } inner_map1 SEC(".maps"), inner_map2 SEC(".maps");
+
+    struct {
+            __uint(type, BPF_MAP_TYPE_ARRAY_OF_MAPS);
+            __uint(max_entries, 2);
+            __type(key, __u32);
+            __array(values, struct inner_map);
+    } outer_map SEC(".maps") = {
+            .values = { &inner_map1,
+                        &inner_map2 }
+    };
+
+See ``progs/test_btf_map_in_map.c`` in ``tools/testing/selftests/bpf`` for more
+examples of declarative initialisation of outer maps.
+
+User Space
+----------
+
+This snippet shows how to create an array based outer map:
+
+.. code-block:: c
+
+    int create_outer_array(int inner_fd) {
+            LIBBPF_OPTS(bpf_map_create_opts, opts, .inner_map_fd = inner_fd);
+            int fd;
+
+            fd = bpf_map_create(BPF_MAP_TYPE_ARRAY_OF_MAPS,
+                                "example_array",       /* name */
+                                sizeof(__u32),         /* key size */
+                                sizeof(__u32),         /* value size */
+                                256,                   /* max entries */
+                                &opts);                /* create opts */
+            return fd;
+    }
+
+
+This snippet shows how to add an inner map to an outer map:
+
+.. code-block:: c
+
+    int add_devmap(int outer_fd, int index, const char *name) {
+            int fd;
+
+            fd = bpf_map_create(BPF_MAP_TYPE_DEVMAP, name,
+                                sizeof(__u32), sizeof(__u32), 256, NULL);
+            if (fd < 0)
+                    return fd;
+
+            return bpf_map_update_elem(outer_fd, &index, &fd, BPF_ANY);
+    }
+
+References
+==========
+
+- https://lore.kernel.org/netdev/20170322170035.923581-3-kafai@fb.com/
+- https://lore.kernel.org/netdev/20170322170035.923581-4-kafai@fb.com/
diff --git a/Documentation/bpf/map_queue_stack.rst b/Documentation/bpf/map_queue_stack.rst
new file mode 100644
index 000000000000..8d14ed49d6e1
--- /dev/null
+++ b/Documentation/bpf/map_queue_stack.rst
@@ -0,0 +1,146 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright (C) 2022 Red Hat, Inc.
+
+=========================================
+BPF_MAP_TYPE_QUEUE and BPF_MAP_TYPE_STACK
+=========================================
+
+.. note::
+   - ``BPF_MAP_TYPE_QUEUE`` and ``BPF_MAP_TYPE_STACK`` were introduced
+     in kernel version 4.20
+
+``BPF_MAP_TYPE_QUEUE`` provides FIFO storage and ``BPF_MAP_TYPE_STACK``
+provides LIFO storage for BPF programs. These maps support peek, pop and
+push operations that are exposed to BPF programs through the respective
+helpers. These operations are exposed to userspace applications using
+the existing ``bpf`` syscall in the following way:
+
+- ``BPF_MAP_LOOKUP_ELEM`` -> peek
+- ``BPF_MAP_LOOKUP_AND_DELETE_ELEM`` -> pop
+- ``BPF_MAP_UPDATE_ELEM`` -> push
+
+``BPF_MAP_TYPE_QUEUE`` and ``BPF_MAP_TYPE_STACK`` do not support
+``BPF_F_NO_PREALLOC``.
+
+Usage
+=====
+
+Kernel BPF
+----------
+
+bpf_map_push_elem()
+~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   long bpf_map_push_elem(struct bpf_map *map, const void *value, u64 flags)
+
+An element ``value`` can be added to a queue or stack using the
+``bpf_map_push_elem`` helper. The ``flags`` parameter must be set to
+``BPF_ANY`` or ``BPF_EXIST``. If ``flags`` is set to ``BPF_EXIST`` then,
+when the queue or stack is full, the oldest element will be removed to
+make room for ``value`` to be added. Returns ``0`` on success, or
+negative error in case of failure.
+
+bpf_map_peek_elem()
+~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   long bpf_map_peek_elem(struct bpf_map *map, void *value)
+
+This helper fetches an element ``value`` from a queue or stack without
+removing it. Returns ``0`` on success, or negative error in case of
+failure.
+
+bpf_map_pop_elem()
+~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   long bpf_map_pop_elem(struct bpf_map *map, void *value)
+
+This helper removes an element into ``value`` from a queue or
+stack. Returns ``0`` on success, or negative error in case of failure.
+
+
+Userspace
+---------
+
+bpf_map_update_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   int bpf_map_update_elem (int fd, const void *key, const void *value, __u64 flags)
+
+A userspace program can push ``value`` onto a queue or stack using libbpf's
+``bpf_map_update_elem`` function. The ``key`` parameter must be set to
+``NULL`` and ``flags`` must be set to ``BPF_ANY`` or ``BPF_EXIST``, with the
+same semantics as the ``bpf_map_push_elem`` kernel helper. Returns ``0`` on
+success, or negative error in case of failure.
+
+bpf_map_lookup_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   int bpf_map_lookup_elem (int fd, const void *key, void *value)
+
+A userspace program can peek at the ``value`` at the head of a queue or stack
+using the libbpf ``bpf_map_lookup_elem`` function. The ``key`` parameter must be
+set to ``NULL``.  Returns ``0`` on success, or negative error in case of
+failure.
+
+bpf_map_lookup_and_delete_elem()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   int bpf_map_lookup_and_delete_elem (int fd, const void *key, void *value)
+
+A userspace program can pop a ``value`` from the head of a queue or stack using
+the libbpf ``bpf_map_lookup_and_delete_elem`` function. The ``key`` parameter
+must be set to ``NULL``. Returns ``0`` on success, or negative error in case of
+failure.
+
+Examples
+========
+
+Kernel BPF
+----------
+
+This snippet shows how to declare a queue in a BPF program:
+
+.. code-block:: c
+
+    struct {
+            __uint(type, BPF_MAP_TYPE_QUEUE);
+            __type(value, __u32);
+            __uint(max_entries, 10);
+    } queue SEC(".maps");
+
+
+Userspace
+---------
+
+This snippet shows how to use libbpf's low-level API to create a queue from
+userspace:
+
+.. code-block:: c
+
+    int create_queue()
+    {
+            return bpf_map_create(BPF_MAP_TYPE_QUEUE,
+                                  "sample_queue", /* name */
+                                  0,              /* key size, must be zero */
+                                  sizeof(__u32),  /* value size */
+                                  10,             /* max entries */
+                                  NULL);          /* create options */
+    }
+
+
+References
+==========
+
+https://lwn.net/ml/netdev/153986858555.9127.14517764371945179514.stgit@kernel/
diff --git a/Documentation/bpf/map_sk_storage.rst b/Documentation/bpf/map_sk_storage.rst
new file mode 100644
index 000000000000..4e9d23ab9ecd
--- /dev/null
+++ b/Documentation/bpf/map_sk_storage.rst
@@ -0,0 +1,159 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright (C) 2022 Red Hat, Inc.
+
+=======================
+BPF_MAP_TYPE_SK_STORAGE
+=======================
+
+.. note::
+   - ``BPF_MAP_TYPE_SK_STORAGE`` was introduced in kernel version 5.2
+
+``BPF_MAP_TYPE_SK_STORAGE`` is used to provide socket-local storage for BPF
+programs. A map of type ``BPF_MAP_TYPE_SK_STORAGE`` declares the type of storage
+to be provided and acts as the handle for accessing the socket-local
+storage. The values for maps of type ``BPF_MAP_TYPE_SK_STORAGE`` are stored
+locally with each socket instead of with the map. The kernel is responsible for
+allocating storage for a socket when requested and for freeing the storage when
+either the map or the socket is deleted.
+
+.. note::
+  - The key type must be ``int`` and ``max_entries`` must be set to ``0``.
+  - The ``BPF_F_NO_PREALLOC`` flag must be used when creating a map for
+    socket-local storage.
+
+Usage
+=====
+
+Kernel BPF
+----------
+
+bpf_sk_storage_get()
+~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   void *bpf_sk_storage_get(struct bpf_map *map, void *sk, void *value, u64 flags)
+
+Socket-local storage for ``map`` can be retrieved from socket ``sk`` using the
+``bpf_sk_storage_get()`` helper. If the ``BPF_LOCAL_STORAGE_GET_F_CREATE``
+flag is used then ``bpf_sk_storage_get()`` will create the storage for ``sk``
+if it does not already exist. ``value`` can be used together with
+``BPF_LOCAL_STORAGE_GET_F_CREATE`` to initialize the storage value, otherwise
+it will be zero initialized. Returns a pointer to the storage on success, or
+``NULL`` in case of failure.
+
+.. note::
+   - ``sk`` is a kernel ``struct sock`` pointer for LSM or tracing programs.
+   - ``sk`` is a ``struct bpf_sock`` pointer for other program types.
+
+bpf_sk_storage_delete()
+~~~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   long bpf_sk_storage_delete(struct bpf_map *map, void *sk)
+
+Socket-local storage for ``map`` can be deleted from socket ``sk`` using the
+``bpf_sk_storage_delete()`` helper. Returns ``0`` on success, or negative
+error in case of failure.
+
+User space
+----------
+
+bpf_map_update_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   int bpf_map_update_elem(int map_fd, const void *key, const void *value, __u64 flags)
+
+Socket-local storage for map ``map_fd`` can be added or updated locally to a
+socket using the ``bpf_map_update_elem()`` libbpf function. The socket is
+identified by a `socket` ``fd`` stored in the pointer ``key``. The pointer
+``value`` has the data to be added or updated to the socket ``fd``. The type
+and size of ``value`` should be the same as the value type of the map
+definition.
+
+The ``flags`` parameter can be used to control the update behaviour:
+
+- ``BPF_ANY`` will create storage for `socket` ``fd`` or update existing storage.
+- ``BPF_NOEXIST`` will create storage for `socket` ``fd`` only if it did not
+  already exist, otherwise the call will fail with ``-EEXIST``.
+- ``BPF_EXIST`` will update existing storage for `socket` ``fd`` if it already
+  exists, otherwise the call will fail with ``-ENOENT``.
+
+Returns ``0`` on success, or negative error in case of failure.
+
+bpf_map_lookup_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   int bpf_map_lookup_elem(int map_fd, const void *key, void *value)
+
+Socket-local storage for map ``map_fd`` can be retrieved from a socket using
+the ``bpf_map_lookup_elem()`` libbpf function. The storage is retrieved from
+the socket identified by a `socket` ``fd`` stored in the pointer
+``key``. Returns ``0`` on success, or negative error in case of failure.
+
+bpf_map_delete_elem()
+~~~~~~~~~~~~~~~~~~~~~
+
+.. code-block:: c
+
+   int bpf_map_delete_elem(int map_fd, const void *key)
+
+Socket-local storage for map ``map_fd`` can be deleted from a socket using the
+``bpf_map_delete_elem()`` libbpf function. The storage is deleted from the
+socket identified by a `socket` ``fd`` stored in the pointer ``key``. Returns
+``0`` on success, or negative error in case of failure.
+
+Examples
+========
+
+Kernel BPF
+----------
+
+This snippet shows how to declare socket-local storage in a BPF program:
+
+.. code-block:: c
+
+    struct {
+            __uint(type, BPF_MAP_TYPE_SK_STORAGE);
+            __uint(map_flags, BPF_F_NO_PREALLOC);
+            __type(key, int);
+            __type(value, struct my_storage);
+    } socket_storage SEC(".maps");
+
+This snippet shows how to retrieve socket-local storage in a BPF program:
+
+.. code-block:: c
+
+    SEC("sockops")
+    int _sockops(struct bpf_sock_ops *ctx)
+    {
+            struct my_storage *storage;
+            struct bpf_sock *sk;
+
+            sk = ctx->sk;
+            if (!sk)
+                    return 1;
+
+            storage = bpf_sk_storage_get(&socket_storage, sk, 0,
+                                         BPF_LOCAL_STORAGE_GET_F_CREATE);
+            if (!storage)
+                    return 1;
+
+            /* Use 'storage' here */
+
+            return 1;
+    }
+
+
+Please see the ``tools/testing/selftests/bpf`` directory for functional
+examples.
+
+References
+==========
+
+https://lwn.net/ml/netdev/20190426171103.61892-1-kafai@fb.com/
diff --git a/Documentation/bpf/map_sockmap.rst b/Documentation/bpf/map_sockmap.rst
new file mode 100644
index 000000000000..cc92047c6630
--- /dev/null
+++ b/Documentation/bpf/map_sockmap.rst
@@ -0,0 +1,498 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright Red Hat
+
+==============================================
+BPF_MAP_TYPE_SOCKMAP and BPF_MAP_TYPE_SOCKHASH
+==============================================
+
+.. note::
+   - ``BPF_MAP_TYPE_SOCKMAP`` was introduced in kernel version 4.14
+   - ``BPF_MAP_TYPE_SOCKHASH`` was introduced in kernel version 4.18
+
+``BPF_MAP_TYPE_SOCKMAP`` and ``BPF_MAP_TYPE_SOCKHASH`` maps can be used to
+redirect skbs between sockets or to apply policy at the socket level based on
+the result of a BPF (verdict) program with the help of the BPF helpers
+``bpf_sk_redirect_map()``, ``bpf_sk_redirect_hash()``,
+``bpf_msg_redirect_map()`` and ``bpf_msg_redirect_hash()``.
+
+``BPF_MAP_TYPE_SOCKMAP`` is backed by an array that uses an integer key as the
+index to look up a reference to a ``struct sock``. The map values are socket
+descriptors. Similarly, ``BPF_MAP_TYPE_SOCKHASH`` is a hash backed BPF map that
+holds references to sockets via their socket descriptors.
+
+.. note::
+    The value type is either __u32 or __u64; the latter (__u64) is to support
+    returning socket cookies to userspace. Returning the ``struct sock *`` that
+    the map holds to user-space is neither safe nor useful.
+
+These maps may have BPF programs attached to them, specifically a parser program
+and a verdict program. The parser program determines how much data has been
+parsed and therefore how much data needs to be queued to come to a verdict. The
+verdict program is essentially the redirect program and can return a verdict
+of ``__SK_DROP``, ``__SK_PASS``, or ``__SK_REDIRECT``.
+
+When a socket is inserted into one of these maps, its socket callbacks are
+replaced and a ``struct sk_psock`` is attached to it. Additionally, this
+``sk_psock`` inherits the programs that are attached to the map.
+
+A sock object may be in multiple maps, but can only inherit a single
+parse or verdict program. If adding a sock object to a map would result
+in having multiple parser programs the update will return an EBUSY error.
+
+The supported programs to attach to these maps are:
+
+.. code-block:: c
+
+	struct sk_psock_progs {
+		struct bpf_prog *msg_parser;
+		struct bpf_prog *stream_parser;
+		struct bpf_prog *stream_verdict;
+		struct bpf_prog	*skb_verdict;
+	};
+
+.. note::
+    Users are not allowed to attach ``stream_verdict`` and ``skb_verdict``
+    programs to the same map.
+
+The attach types for the map programs are:
+
+- ``msg_parser`` program - ``BPF_SK_MSG_VERDICT``.
+- ``stream_parser`` program - ``BPF_SK_SKB_STREAM_PARSER``.
+- ``stream_verdict`` program - ``BPF_SK_SKB_STREAM_VERDICT``.
+- ``skb_verdict`` program - ``BPF_SK_SKB_VERDICT``.
+
+There are additional helpers available to use with the parser and verdict
+programs: ``bpf_msg_apply_bytes()`` and ``bpf_msg_cork_bytes()``. With
+``bpf_msg_apply_bytes()`` BPF programs can tell the infrastructure how many
+bytes the given verdict should apply to. The helper ``bpf_msg_cork_bytes()``
+handles a different case where a BPF program cannot reach a verdict on a msg
+until it receives more bytes AND the program doesn't want to forward the packet
+until it is known to be good.
+
+Finally, the helpers ``bpf_msg_pull_data()`` and ``bpf_msg_push_data()`` are
+available to ``BPF_PROG_TYPE_SK_MSG`` BPF programs to pull in data and set the
+start and end pointers to given values or to add metadata to the ``struct
+sk_msg_buff *msg``.
+
+All these helpers will be described in more detail below.
+
+Usage
+=====
+Kernel BPF
+----------
+bpf_msg_redirect_map()
+^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+	long bpf_msg_redirect_map(struct sk_msg_buff *msg, struct bpf_map *map, u32 key, u64 flags)
+
+This helper is used in programs implementing policies at the socket level. If
+the message ``msg`` is allowed to pass (i.e., if the verdict BPF program
+returns ``SK_PASS``), redirect it to the socket referenced by ``map`` (of type
+``BPF_MAP_TYPE_SOCKMAP``) at index ``key``. Both ingress and egress interfaces
+can be used for redirection. The ``BPF_F_INGRESS`` value in ``flags`` is used
+to select the ingress path otherwise the egress path is selected. This is the
+only flag supported for now.
+
+Returns ``SK_PASS`` on success, or ``SK_DROP`` on error.
+
+bpf_sk_redirect_map()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    long bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key u64 flags)
+
+Redirect the packet to the socket referenced by ``map`` (of type
+``BPF_MAP_TYPE_SOCKMAP``) at index ``key``. Both ingress and egress interfaces
+can be used for redirection. The ``BPF_F_INGRESS`` value in ``flags`` is used
+to select the ingress path otherwise the egress path is selected. This is the
+only flag supported for now.
+
+Returns ``SK_PASS`` on success, or ``SK_DROP`` on error.
+
+bpf_map_lookup_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
+
+socket entries of type ``struct sock *`` can be retrieved using the
+``bpf_map_lookup_elem()`` helper.
+
+bpf_sock_map_update()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    long bpf_sock_map_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags)
+
+Add an entry to, or update a ``map`` referencing sockets. The ``skops`` is used
+as a new value for the entry associated to ``key``. The ``flags`` argument can
+be one of the following:
+
+- ``BPF_ANY``: Create a new element or update an existing element.
+- ``BPF_NOEXIST``: Create a new element only if it did not exist.
+- ``BPF_EXIST``: Update an existing element.
+
+If the ``map`` has BPF programs (parser and verdict), those will be inherited
+by the socket being added. If the socket is already attached to BPF programs,
+this results in an error.
+
+Returns 0 on success, or a negative error in case of failure.
+
+bpf_sock_hash_update()
+^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    long bpf_sock_hash_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags)
+
+Add an entry to, or update a sockhash ``map`` referencing sockets. The ``skops``
+is used as a new value for the entry associated to ``key``.
+
+The ``flags`` argument can be one of the following:
+
+- ``BPF_ANY``: Create a new element or update an existing element.
+- ``BPF_NOEXIST``: Create a new element only if it did not exist.
+- ``BPF_EXIST``: Update an existing element.
+
+If the ``map`` has BPF programs (parser and verdict), those will be inherited
+by the socket being added. If the socket is already attached to BPF programs,
+this results in an error.
+
+Returns 0 on success, or a negative error in case of failure.
+
+bpf_msg_redirect_hash()
+^^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    long bpf_msg_redirect_hash(struct sk_msg_buff *msg, struct bpf_map *map, void *key, u64 flags)
+
+This helper is used in programs implementing policies at the socket level. If
+the message ``msg`` is allowed to pass (i.e., if the verdict BPF program returns
+``SK_PASS``), redirect it to the socket referenced by ``map`` (of type
+``BPF_MAP_TYPE_SOCKHASH``) using hash ``key``. Both ingress and egress
+interfaces can be used for redirection. The ``BPF_F_INGRESS`` value in
+``flags`` is used to select the ingress path otherwise the egress path is
+selected. This is the only flag supported for now.
+
+Returns ``SK_PASS`` on success, or ``SK_DROP`` on error.
+
+bpf_sk_redirect_hash()
+^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    long bpf_sk_redirect_hash(struct sk_buff *skb, struct bpf_map *map, void *key, u64 flags)
+
+This helper is used in programs implementing policies at the skb socket level.
+If the sk_buff ``skb`` is allowed to pass (i.e., if the verdict BPF program
+returns ``SK_PASS``), redirect it to the socket referenced by ``map`` (of type
+``BPF_MAP_TYPE_SOCKHASH``) using hash ``key``. Both ingress and egress
+interfaces can be used for redirection. The ``BPF_F_INGRESS`` value in
+``flags`` is used to select the ingress path otherwise the egress path is
+selected. This is the only flag supported for now.
+
+Returns ``SK_PASS`` on success, or ``SK_DROP`` on error.
+
+bpf_msg_apply_bytes()
+^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    long bpf_msg_apply_bytes(struct sk_msg_buff *msg, u32 bytes)
+
+For socket policies, apply the verdict of the BPF program to the next (number
+of ``bytes``) of message ``msg``. For example, this helper can be used in the
+following cases:
+
+- A single ``sendmsg()`` or ``sendfile()`` system call contains multiple
+  logical messages that the BPF program is supposed to read and for which it
+  should apply a verdict.
+- A BPF program only cares to read the first ``bytes`` of a ``msg``. If the
+  message has a large payload, then setting up and calling the BPF program
+  repeatedly for all bytes, even though the verdict is already known, would
+  create unnecessary overhead.
+
+Returns 0
+
+bpf_msg_cork_bytes()
+^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    long bpf_msg_cork_bytes(struct sk_msg_buff *msg, u32 bytes)
+
+For socket policies, prevent the execution of the verdict BPF program for
+message ``msg`` until the number of ``bytes`` have been accumulated.
+
+This can be used when one needs a specific number of bytes before a verdict can
+be assigned, even if the data spans multiple ``sendmsg()`` or ``sendfile()``
+calls.
+
+Returns 0
+
+bpf_msg_pull_data()
+^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    long bpf_msg_pull_data(struct sk_msg_buff *msg, u32 start, u32 end, u64 flags)
+
+For socket policies, pull in non-linear data from user space for ``msg`` and set
+pointers ``msg->data`` and ``msg->data_end`` to ``start`` and ``end`` bytes
+offsets into ``msg``, respectively.
+
+If a program of type ``BPF_PROG_TYPE_SK_MSG`` is run on a ``msg`` it can only
+parse data that the (``data``, ``data_end``) pointers have already consumed.
+For ``sendmsg()`` hooks this is likely the first scatterlist element. But for
+calls relying on the ``sendpage`` handler (e.g., ``sendfile()``) this will be
+the range (**0**, **0**) because the data is shared with user space and by
+default the objective is to avoid allowing user space to modify data while (or
+after) BPF verdict is being decided. This helper can be used to pull in data
+and to set the start and end pointers to given values. Data will be copied if
+necessary (i.e., if data was not linear and if start and end pointers do not
+point to the same chunk).
+
+A call to this helper is susceptible to change the underlying packet buffer.
+Therefore, at load time, all checks on pointers previously done by the verifier
+are invalidated and must be performed again, if the helper is used in
+combination with direct packet access.
+
+All values for ``flags`` are reserved for future usage, and must be left at
+zero.
+
+Returns 0 on success, or a negative error in case of failure.
+
+bpf_map_lookup_elem()
+^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: c
+
+	void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
+
+Look up a socket entry in the sockmap or sockhash map.
+
+Returns the socket entry associated to ``key``, or NULL if no entry was found.
+
+bpf_map_update_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+	long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags)
+
+Add or update a socket entry in a sockmap or sockhash.
+
+The flags argument can be one of the following:
+
+- BPF_ANY: Create a new element or update an existing element.
+- BPF_NOEXIST: Create a new element only if it did not exist.
+- BPF_EXIST: Update an existing element.
+
+Returns 0 on success, or a negative error in case of failure.
+
+bpf_map_delete_elem()
+^^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    long bpf_map_delete_elem(struct bpf_map *map, const void *key)
+
+Delete a socket entry from a sockmap or a sockhash.
+
+Returns	0 on success, or a negative error in case of failure.
+
+User space
+----------
+bpf_map_update_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+	int bpf_map_update_elem(int fd, const void *key, const void *value, __u64 flags)
+
+Sockmap entries can be added or updated using the ``bpf_map_update_elem()``
+function. The ``key`` parameter is the index value of the sockmap array. And the
+``value`` parameter is the FD value of that socket.
+
+Under the hood, the sockmap update function uses the socket FD value to
+retrieve the associated socket and its attached psock.
+
+The flags argument can be one of the following:
+
+- BPF_ANY: Create a new element or update an existing element.
+- BPF_NOEXIST: Create a new element only if it did not exist.
+- BPF_EXIST: Update an existing element.
+
+bpf_map_lookup_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    int bpf_map_lookup_elem(int fd, const void *key, void *value)
+
+Sockmap entries can be retrieved using the ``bpf_map_lookup_elem()`` function.
+
+.. note::
+	The entry returned is a socket cookie rather than a socket itself.
+
+bpf_map_delete_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    int bpf_map_delete_elem(int fd, const void *key)
+
+Sockmap entries can be deleted using the ``bpf_map_delete_elem()``
+function.
+
+Returns 0 on success, or negative error in case of failure.
+
+Examples
+========
+
+Kernel BPF
+----------
+Several examples of the use of sockmap APIs can be found in:
+
+- `tools/testing/selftests/bpf/progs/test_sockmap_kern.h`_
+- `tools/testing/selftests/bpf/progs/sockmap_parse_prog.c`_
+- `tools/testing/selftests/bpf/progs/sockmap_verdict_prog.c`_
+- `tools/testing/selftests/bpf/progs/test_sockmap_listen.c`_
+- `tools/testing/selftests/bpf/progs/test_sockmap_update.c`_
+
+The following code snippet shows how to declare a sockmap.
+
+.. code-block:: c
+
+	struct {
+		__uint(type, BPF_MAP_TYPE_SOCKMAP);
+		__uint(max_entries, 1);
+		__type(key, __u32);
+		__type(value, __u64);
+	} sock_map_rx SEC(".maps");
+
+The following code snippet shows a sample parser program.
+
+.. code-block:: c
+
+	SEC("sk_skb/stream_parser")
+	int bpf_prog_parser(struct __sk_buff *skb)
+	{
+		return skb->len;
+	}
+
+The following code snippet shows a simple verdict program that interacts with a
+sockmap to redirect traffic to another socket based on the local port.
+
+.. code-block:: c
+
+	SEC("sk_skb/stream_verdict")
+	int bpf_prog_verdict(struct __sk_buff *skb)
+	{
+		__u32 lport = skb->local_port;
+		__u32 idx = 0;
+
+		if (lport == 10000)
+			return bpf_sk_redirect_map(skb, &sock_map_rx, idx, 0);
+
+		return SK_PASS;
+	}
+
+The following code snippet shows how to declare a sockhash map.
+
+.. code-block:: c
+
+	struct socket_key {
+		__u32 src_ip;
+		__u32 dst_ip;
+		__u32 src_port;
+		__u32 dst_port;
+	};
+
+	struct {
+		__uint(type, BPF_MAP_TYPE_SOCKHASH);
+		__uint(max_entries, 1);
+		__type(key, struct socket_key);
+		__type(value, __u64);
+	} sock_hash_rx SEC(".maps");
+
+The following code snippet shows a simple verdict program that interacts with a
+sockhash to redirect traffic to another socket based on a hash of some of the
+skb parameters.
+
+.. code-block:: c
+
+	static inline
+	void extract_socket_key(struct __sk_buff *skb, struct socket_key *key)
+	{
+		key->src_ip = skb->remote_ip4;
+		key->dst_ip = skb->local_ip4;
+		key->src_port = skb->remote_port >> 16;
+		key->dst_port = (bpf_htonl(skb->local_port)) >> 16;
+	}
+
+	SEC("sk_skb/stream_verdict")
+	int bpf_prog_verdict(struct __sk_buff *skb)
+	{
+		struct socket_key key;
+
+		extract_socket_key(skb, &key);
+
+		return bpf_sk_redirect_hash(skb, &sock_hash_rx, &key, 0);
+	}
+
+User space
+----------
+Several examples of the use of sockmap APIs can be found in:
+
+- `tools/testing/selftests/bpf/prog_tests/sockmap_basic.c`_
+- `tools/testing/selftests/bpf/test_sockmap.c`_
+- `tools/testing/selftests/bpf/test_maps.c`_
+
+The following code sample shows how to create a sockmap, attach a parser and
+verdict program, as well as add a socket entry.
+
+.. code-block:: c
+
+	int create_sample_sockmap(int sock, int parse_prog_fd, int verdict_prog_fd)
+	{
+		int index = 0;
+		int map, err;
+
+		map = bpf_map_create(BPF_MAP_TYPE_SOCKMAP, NULL, sizeof(int), sizeof(int), 1, NULL);
+		if (map < 0) {
+			fprintf(stderr, "Failed to create sockmap: %s\n", strerror(errno));
+			return -1;
+		}
+
+		err = bpf_prog_attach(parse_prog_fd, map, BPF_SK_SKB_STREAM_PARSER, 0);
+		if (err){
+			fprintf(stderr, "Failed to attach_parser_prog_to_map: %s\n", strerror(errno));
+			goto out;
+		}
+
+		err = bpf_prog_attach(verdict_prog_fd, map, BPF_SK_SKB_STREAM_VERDICT, 0);
+		if (err){
+			fprintf(stderr, "Failed to attach_verdict_prog_to_map: %s\n", strerror(errno));
+			goto out;
+		}
+
+		err = bpf_map_update_elem(map, &index, &sock, BPF_NOEXIST);
+		if (err) {
+			fprintf(stderr, "Failed to update sockmap: %s\n", strerror(errno));
+			goto out;
+		}
+
+	out:
+		close(map);
+		return err;
+	}
+
+References
+===========
+
+- https://github.com/jrfastab/linux-kernel-xdp/commit/c89fd73cb9d2d7f3c716c3e00836f07b1aeb261f
+- https://lwn.net/Articles/731133/
+- http://vger.kernel.org/lpc_net2018_talks/ktls_bpf_paper.pdf
+- https://lwn.net/Articles/748628/
+- https://lore.kernel.org/bpf/20200218171023.844439-7-jakub@cloudflare.com/
+
+.. _`tools/testing/selftests/bpf/progs/test_sockmap_kern.h`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/progs/test_sockmap_kern.h
+.. _`tools/testing/selftests/bpf/progs/sockmap_parse_prog.c`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/progs/sockmap_parse_prog.c
+.. _`tools/testing/selftests/bpf/progs/sockmap_verdict_prog.c`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/progs/sockmap_verdict_prog.c
+.. _`tools/testing/selftests/bpf/prog_tests/sockmap_basic.c`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c
+.. _`tools/testing/selftests/bpf/test_sockmap.c`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/test_sockmap.c
+.. _`tools/testing/selftests/bpf/test_maps.c`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/test_maps.c
+.. _`tools/testing/selftests/bpf/progs/test_sockmap_listen.c`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/progs/test_sockmap_listen.c
+.. _`tools/testing/selftests/bpf/progs/test_sockmap_update.c`: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/selftests/bpf/progs/test_sockmap_update.c
diff --git a/Documentation/bpf/map_xskmap.rst b/Documentation/bpf/map_xskmap.rst
new file mode 100644
index 000000000000..dc143edd9233
--- /dev/null
+++ b/Documentation/bpf/map_xskmap.rst
@@ -0,0 +1,192 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright (C) 2022 Red Hat, Inc.
+
+===================
+BPF_MAP_TYPE_XSKMAP
+===================
+
+.. note::
+   - ``BPF_MAP_TYPE_XSKMAP`` was introduced in kernel version 4.18
+
+The ``BPF_MAP_TYPE_XSKMAP`` is used as a backend map for XDP BPF helper
+call ``bpf_redirect_map()`` and ``XDP_REDIRECT`` action, like 'devmap' and 'cpumap'.
+This map type redirects raw XDP frames to `AF_XDP`_ sockets (XSKs), a new type of
+address family in the kernel that allows redirection of frames from a driver to
+user space without having to traverse the full network stack. An AF_XDP socket
+binds to a single netdev queue. A mapping of XSKs to queues is shown below:
+
+.. code-block:: none
+
+    +---------------------------------------------------+
+    |     xsk A      |     xsk B       |      xsk C     |<---+ User space
+    =========================================================|==========
+    |    Queue 0     |     Queue 1     |     Queue 2    |    |  Kernel
+    +---------------------------------------------------+    |
+    |                  Netdev eth0                      |    |
+    +---------------------------------------------------+    |
+    |                            +=============+        |    |
+    |                            | key |  xsk  |        |    |
+    |  +---------+               +=============+        |    |
+    |  |         |               |  0  | xsk A |        |    |
+    |  |         |               +-------------+        |    |
+    |  |         |               |  1  | xsk B |        |    |
+    |  | BPF     |-- redirect -->+-------------+-------------+
+    |  | prog    |               |  2  | xsk C |        |
+    |  |         |               +-------------+        |
+    |  |         |                                      |
+    |  |         |                                      |
+    |  +---------+                                      |
+    |                                                   |
+    +---------------------------------------------------+
+
+.. note::
+    An AF_XDP socket that is bound to a certain <netdev/queue_id> will *only*
+    accept XDP frames from that <netdev/queue_id>. If an XDP program tries to redirect
+    from a <netdev/queue_id> other than what the socket is bound to, the frame will
+    not be received on the socket.
+
+Typically an XSKMAP is created per netdev. This map contains an array of XSK File
+Descriptors (FDs). The number of array elements is typically set or adjusted using
+the ``max_entries`` map parameter. For AF_XDP ``max_entries`` is equal to the number
+of queues supported by the netdev.
+
+.. note::
+    Both the map key and map value size must be 4 bytes.
+
+Usage
+=====
+
+Kernel BPF
+----------
+bpf_redirect_map()
+^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    long bpf_redirect_map(struct bpf_map *map, u32 key, u64 flags)
+
+Redirect the packet to the endpoint referenced by ``map`` at index ``key``.
+For ``BPF_MAP_TYPE_XSKMAP`` this map contains references to XSK FDs
+for sockets attached to a netdev's queues.
+
+.. note::
+    If the map is empty at an index, the packet is dropped. This means that it is
+    necessary to have an XDP program loaded with at least one XSK in the
+    XSKMAP to be able to get any traffic to user space through the socket.
+
+bpf_map_lookup_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    void *bpf_map_lookup_elem(struct bpf_map *map, const void *key)
+
+XSK entry references of type ``struct xdp_sock *`` can be retrieved using the
+``bpf_map_lookup_elem()`` helper.
+
+User space
+----------
+.. note::
+    XSK entries can only be updated/deleted from user space and not from
+    a BPF program. Trying to call these functions from a kernel BPF program will
+    result in the program failing to load and a verifier warning.
+
+bpf_map_update_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+	int bpf_map_update_elem(int fd, const void *key, const void *value, __u64 flags)
+
+XSK entries can be added or updated using the ``bpf_map_update_elem()``
+helper. The ``key`` parameter is equal to the queue_id of the queue the XSK
+is attaching to. And the ``value`` parameter is the FD value of that socket.
+
+Under the hood, the XSKMAP update function uses the XSK FD value to retrieve the
+associated ``struct xdp_sock`` instance.
+
+The flags argument can be one of the following:
+
+- BPF_ANY: Create a new element or update an existing element.
+- BPF_NOEXIST: Create a new element only if it did not exist.
+- BPF_EXIST: Update an existing element.
+
+bpf_map_lookup_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    int bpf_map_lookup_elem(int fd, const void *key, void *value)
+
+Returns ``struct xdp_sock *`` or negative error in case of failure.
+
+bpf_map_delete_elem()
+^^^^^^^^^^^^^^^^^^^^^
+.. code-block:: c
+
+    int bpf_map_delete_elem(int fd, const void *key)
+
+XSK entries can be deleted using the ``bpf_map_delete_elem()``
+helper. This helper will return 0 on success, or negative error in case of
+failure.
+
+.. note::
+    When `libxdp`_ deletes an XSK it also removes the associated socket
+    entry from the XSKMAP.
+
+Examples
+========
+Kernel
+------
+
+The following code snippet shows how to declare a ``BPF_MAP_TYPE_XSKMAP`` called
+``xsks_map`` and how to redirect packets to an XSK.
+
+.. code-block:: c
+
+	struct {
+		__uint(type, BPF_MAP_TYPE_XSKMAP);
+		__type(key, __u32);
+		__type(value, __u32);
+		__uint(max_entries, 64);
+	} xsks_map SEC(".maps");
+
+
+	SEC("xdp")
+	int xsk_redir_prog(struct xdp_md *ctx)
+	{
+		__u32 index = ctx->rx_queue_index;
+
+		if (bpf_map_lookup_elem(&xsks_map, &index))
+			return bpf_redirect_map(&xsks_map, index, 0);
+		return XDP_PASS;
+	}
+
+User space
+----------
+
+The following code snippet shows how to update an XSKMAP with an XSK entry.
+
+.. code-block:: c
+
+	int update_xsks_map(struct bpf_map *xsks_map, int queue_id, int xsk_fd)
+	{
+		int ret;
+
+		ret = bpf_map_update_elem(bpf_map__fd(xsks_map), &queue_id, &xsk_fd, 0);
+		if (ret < 0)
+			fprintf(stderr, "Failed to update xsks_map: %s\n", strerror(errno));
+
+		return ret;
+	}
+
+For an example on how create AF_XDP sockets, please see the AF_XDP-example and
+AF_XDP-forwarding programs in the `bpf-examples`_ directory in the `libxdp`_ repository.
+For a detailed explanation of the AF_XDP interface please see:
+
+- `libxdp-readme`_.
+- `AF_XDP`_ kernel documentation.
+
+.. note::
+    The most comprehensive resource for using XSKMAPs and AF_XDP is `libxdp`_.
+
+.. _libxdp: https://github.com/xdp-project/xdp-tools/tree/master/lib/libxdp
+.. _AF_XDP: https://www.kernel.org/doc/html/latest/networking/af_xdp.html
+.. _bpf-examples: https://github.com/xdp-project/bpf-examples
+.. _libxdp-readme: https://github.com/xdp-project/xdp-tools/tree/master/lib/libxdp#using-af_xdp-sockets
diff --git a/Documentation/bpf/maps.rst b/Documentation/bpf/maps.rst
new file mode 100644
index 000000000000..6f069f3d6f4b
--- /dev/null
+++ b/Documentation/bpf/maps.rst
@@ -0,0 +1,82 @@
+
+========
+BPF maps
+========
+
+BPF 'maps' provide generic storage of different types for sharing data between
+kernel and user space. There are several storage types available, including
+hash, array, bloom filter and radix-tree. Several of the map types exist to
+support specific BPF helpers that perform actions based on the map contents. The
+maps are accessed from BPF programs via BPF helpers which are documented in the
+`man-pages`_ for `bpf-helpers(7)`_.
+
+BPF maps are accessed from user space via the ``bpf`` syscall, which provides
+commands to create maps, lookup elements, update elements and delete elements.
+More details of the BPF syscall are available in `ebpf-syscall`_ and in the
+`man-pages`_ for `bpf(2)`_.
+
+Map Types
+=========
+
+.. toctree::
+   :maxdepth: 1
+   :glob:
+
+   map_*
+
+Usage Notes
+===========
+
+.. c:function::
+   int bpf(int command, union bpf_attr *attr, u32 size)
+
+Use the ``bpf()`` system call to perform the operation specified by
+``command``. The operation takes parameters provided in ``attr``. The ``size``
+argument is the size of the ``union bpf_attr`` in ``attr``.
+
+**BPF_MAP_CREATE**
+
+Create a map with the desired type and attributes in ``attr``:
+
+.. code-block:: c
+
+    int fd;
+    union bpf_attr attr = {
+            .map_type = BPF_MAP_TYPE_ARRAY;  /* mandatory */
+            .key_size = sizeof(__u32);       /* mandatory */
+            .value_size = sizeof(__u32);     /* mandatory */
+            .max_entries = 256;              /* mandatory */
+            .map_flags = BPF_F_MMAPABLE;
+            .map_name = "example_array";
+    };
+
+    fd = bpf(BPF_MAP_CREATE, &attr, sizeof(attr));
+
+Returns a process-local file descriptor on success, or negative error in case of
+failure. The map can be deleted by calling ``close(fd)``. Maps held by open
+file descriptors will be deleted automatically when a process exits.
+
+.. note:: Valid characters for ``map_name`` are ``A-Z``, ``a-z``, ``0-9``,
+   ``'_'`` and ``'.'``.
+
+**BPF_MAP_LOOKUP_ELEM**
+
+Lookup key in a given map using ``attr->map_fd``, ``attr->key``,
+``attr->value``. Returns zero and stores found elem into ``attr->value`` on
+success, or negative error on failure.
+
+**BPF_MAP_UPDATE_ELEM**
+
+Create or update key/value pair in a given map using ``attr->map_fd``, ``attr->key``,
+``attr->value``. Returns zero on success or negative error on failure.
+
+**BPF_MAP_DELETE_ELEM**
+
+Find and delete element by key in a given map using ``attr->map_fd``,
+``attr->key``. Returns zero on success or negative error on failure.
+
+.. Links:
+.. _man-pages: https://www.kernel.org/doc/man-pages/
+.. _bpf(2): https://man7.org/linux/man-pages/man2/bpf.2.html
+.. _bpf-helpers(7): https://man7.org/linux/man-pages/man7/bpf-helpers.7.html
+.. _ebpf-syscall: https://docs.kernel.org/userspace-api/ebpf/syscall.html
diff --git a/Documentation/bpf/other.rst b/Documentation/bpf/other.rst
new file mode 100644
index 000000000000..7e6b12018802
--- /dev/null
+++ b/Documentation/bpf/other.rst
@@ -0,0 +1,10 @@
+=====
+Other
+=====
+
+.. toctree::
+   :maxdepth: 1
+
+   ringbuf
+   llvm_reloc
+   graph_ds_impl
diff --git a/Documentation/bpf/prog_lsm.rst b/Documentation/bpf/prog_lsm.rst
new file mode 100644
index 000000000000..ad2be02f30c2
--- /dev/null
+++ b/Documentation/bpf/prog_lsm.rst
@@ -0,0 +1,143 @@
+.. SPDX-License-Identifier: GPL-2.0+
+.. Copyright (C) 2020 Google LLC.
+
+================
+LSM BPF Programs
+================
+
+These BPF programs allow runtime instrumentation of the LSM hooks by privileged
+users to implement system-wide MAC (Mandatory Access Control) and Audit
+policies using eBPF.
+
+Structure
+---------
+
+The example shows an eBPF program that can be attached to the ``file_mprotect``
+LSM hook:
+
+.. c:function:: int file_mprotect(struct vm_area_struct *vma, unsigned long reqprot, unsigned long prot);
+
+Other LSM hooks which can be instrumented can be found in
+``security/security.c``.
+
+eBPF programs that use Documentation/bpf/btf.rst do not need to include kernel
+headers for accessing information from the attached eBPF program's context.
+They can simply declare the structures in the eBPF program and only specify
+the fields that need to be accessed.
+
+.. code-block:: c
+
+	struct mm_struct {
+		unsigned long start_brk, brk, start_stack;
+	} __attribute__((preserve_access_index));
+
+	struct vm_area_struct {
+		unsigned long start_brk, brk, start_stack;
+		unsigned long vm_start, vm_end;
+		struct mm_struct *vm_mm;
+	} __attribute__((preserve_access_index));
+
+
+.. note:: The order of the fields is irrelevant.
+
+This can be further simplified (if one has access to the BTF information at
+build time) by generating the ``vmlinux.h`` with:
+
+.. code-block:: console
+
+	# bpftool btf dump file <path-to-btf-vmlinux> format c > vmlinux.h
+
+.. note:: ``path-to-btf-vmlinux`` can be ``/sys/kernel/btf/vmlinux`` if the
+	  build environment matches the environment the BPF programs are
+	  deployed in.
+
+The ``vmlinux.h`` can then simply be included in the BPF programs without
+requiring the definition of the types.
+
+The eBPF programs can be declared using the``BPF_PROG``
+macros defined in `tools/lib/bpf/bpf_tracing.h`_. In this
+example:
+
+	* ``"lsm/file_mprotect"`` indicates the LSM hook that the program must
+	  be attached to
+	* ``mprotect_audit`` is the name of the eBPF program
+
+.. code-block:: c
+
+	SEC("lsm/file_mprotect")
+	int BPF_PROG(mprotect_audit, struct vm_area_struct *vma,
+		     unsigned long reqprot, unsigned long prot, int ret)
+	{
+		/* ret is the return value from the previous BPF program
+		 * or 0 if it's the first hook.
+		 */
+		if (ret != 0)
+			return ret;
+
+		int is_heap;
+
+		is_heap = (vma->vm_start >= vma->vm_mm->start_brk &&
+			   vma->vm_end <= vma->vm_mm->brk);
+
+		/* Return an -EPERM or write information to the perf events buffer
+		 * for auditing
+		 */
+		if (is_heap)
+			return -EPERM;
+	}
+
+The ``__attribute__((preserve_access_index))`` is a clang feature that allows
+the BPF verifier to update the offsets for the access at runtime using the
+Documentation/bpf/btf.rst information. Since the BPF verifier is aware of the
+types, it also validates all the accesses made to the various types in the
+eBPF program.
+
+Loading
+-------
+
+eBPF programs can be loaded with the :manpage:`bpf(2)` syscall's
+``BPF_PROG_LOAD`` operation:
+
+.. code-block:: c
+
+	struct bpf_object *obj;
+
+	obj = bpf_object__open("./my_prog.o");
+	bpf_object__load(obj);
+
+This can be simplified by using a skeleton header generated by ``bpftool``:
+
+.. code-block:: console
+
+	# bpftool gen skeleton my_prog.o > my_prog.skel.h
+
+and the program can be loaded by including ``my_prog.skel.h`` and using
+the generated helper, ``my_prog__open_and_load``.
+
+Attachment to LSM Hooks
+-----------------------
+
+The LSM allows attachment of eBPF programs as LSM hooks using :manpage:`bpf(2)`
+syscall's ``BPF_RAW_TRACEPOINT_OPEN`` operation or more simply by
+using the libbpf helper ``bpf_program__attach_lsm``.
+
+The program can be detached from the LSM hook by *destroying* the ``link``
+link returned by ``bpf_program__attach_lsm`` using ``bpf_link__destroy``.
+
+One can also use the helpers generated in ``my_prog.skel.h`` i.e.
+``my_prog__attach`` for attachment and ``my_prog__destroy`` for cleaning up.
+
+Examples
+--------
+
+An example eBPF program can be found in
+`tools/testing/selftests/bpf/progs/lsm.c`_ and the corresponding
+userspace code in `tools/testing/selftests/bpf/prog_tests/test_lsm.c`_
+
+.. Links
+.. _tools/lib/bpf/bpf_tracing.h:
+   https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/lib/bpf/bpf_tracing.h
+.. _tools/testing/selftests/bpf/progs/lsm.c:
+   https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/testing/selftests/bpf/progs/lsm.c
+.. _tools/testing/selftests/bpf/prog_tests/test_lsm.c:
+   https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/tools/testing/selftests/bpf/prog_tests/test_lsm.c
diff --git a/Documentation/bpf/programs.rst b/Documentation/bpf/programs.rst
new file mode 100644
index 000000000000..c99000ab6d9b
--- /dev/null
+++ b/Documentation/bpf/programs.rst
@@ -0,0 +1,12 @@
+=============
+Program Types
+=============
+
+.. toctree::
+   :maxdepth: 1
+   :glob:
+
+   prog_*
+
+For a list of all program types, see :ref:`program_types_and_elf` in
+the :ref:`libbpf` documentation.
diff --git a/Documentation/bpf/redirect.rst b/Documentation/bpf/redirect.rst
new file mode 100644
index 000000000000..2fa2b0b05004
--- /dev/null
+++ b/Documentation/bpf/redirect.rst
@@ -0,0 +1,81 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+.. Copyright (C) 2022 Red Hat, Inc.
+
+========
+Redirect
+========
+XDP_REDIRECT
+############
+Supported maps
+--------------
+
+XDP_REDIRECT works with the following map types:
+
+- ``BPF_MAP_TYPE_DEVMAP``
+- ``BPF_MAP_TYPE_DEVMAP_HASH``
+- ``BPF_MAP_TYPE_CPUMAP``
+- ``BPF_MAP_TYPE_XSKMAP``
+
+For more information on these maps, please see the specific map documentation.
+
+Process
+-------
+
+.. kernel-doc:: net/core/filter.c
+   :doc: xdp redirect
+
+.. note::
+    Not all drivers support transmitting frames after a redirect, and for
+    those that do, not all of them support non-linear frames. Non-linear xdp
+    bufs/frames are bufs/frames that contain more than one fragment.
+
+Debugging packet drops
+----------------------
+Silent packet drops for XDP_REDIRECT can be debugged using:
+
+- bpf_trace
+- perf_record
+
+bpf_trace
+^^^^^^^^^
+The following bpftrace command can be used to capture and count all XDP tracepoints:
+
+.. code-block:: none
+
+    sudo bpftrace -e 'tracepoint:xdp:* { @cnt[probe] = count(); }'
+    Attaching 12 probes...
+    ^C
+
+    @cnt[tracepoint:xdp:mem_connect]: 18
+    @cnt[tracepoint:xdp:mem_disconnect]: 18
+    @cnt[tracepoint:xdp:xdp_exception]: 19605
+    @cnt[tracepoint:xdp:xdp_devmap_xmit]: 1393604
+    @cnt[tracepoint:xdp:xdp_redirect]: 22292200
+
+.. note::
+    The various xdp tracepoints can be found in ``source/include/trace/events/xdp.h``
+
+The following bpftrace command can be used to extract the ``ERRNO`` being returned as
+part of the err parameter:
+
+.. code-block:: none
+
+    sudo bpftrace -e \
+    'tracepoint:xdp:xdp_redirect*_err {@redir_errno[-args->err] = count();}
+    tracepoint:xdp:xdp_devmap_xmit {@devmap_errno[-args->err] = count();}'
+
+perf record
+^^^^^^^^^^^
+The perf tool also supports recording tracepoints:
+
+.. code-block:: none
+
+    perf record -a -e xdp:xdp_redirect_err \
+        -e xdp:xdp_redirect_map_err \
+        -e xdp:xdp_exception \
+        -e xdp:xdp_devmap_xmit
+
+References
+===========
+
+- https://github.com/xdp-project/xdp-tutorial/tree/master/tracing02-xdp-monitor
diff --git a/Documentation/bpf/ringbuf.rst b/Documentation/bpf/ringbuf.rst
index 6a615cd62bda..a99cd05d79d4 100644
--- a/Documentation/bpf/ringbuf.rst
+++ b/Documentation/bpf/ringbuf.rst
@@ -124,7 +124,7 @@ buffer.  Currently 4 are supported:
 
 - ``BPF_RB_AVAIL_DATA`` returns amount of unconsumed data in ring buffer;
 - ``BPF_RB_RING_SIZE`` returns the size of ring buffer;
-- ``BPF_RB_CONS_POS``/``BPF_RB_PROD_POS`` returns current logical possition
+- ``BPF_RB_CONS_POS``/``BPF_RB_PROD_POS`` returns current logical position
   of consumer/producer, respectively.
 
 Returned values are momentarily snapshots of ring buffer state and could be
@@ -146,7 +146,7 @@ Design and Implementation
 This reserve/commit schema allows a natural way for multiple producers, either
 on different CPUs or even on the same CPU/in the same BPF program, to reserve
 independent records and work with them without blocking other producers. This
-means that if BPF program was interruped by another BPF program sharing the
+means that if BPF program was interrupted by another BPF program sharing the
 same ring buffer, they will both get a record reserved (provided there is
 enough space left) and can work with it and submit it independently. This
 applies to NMI context as well, except that due to using a spinlock during
diff --git a/Documentation/bpf/syscall_api.rst b/Documentation/bpf/syscall_api.rst
new file mode 100644
index 000000000000..f0a1dff087ad
--- /dev/null
+++ b/Documentation/bpf/syscall_api.rst
@@ -0,0 +1,11 @@
+===========
+Syscall API
+===========
+
+The primary info for the bpf syscall is available in the `man-pages`_
+for `bpf(2)`_. For more information about the userspace API, see
+Documentation/userspace-api/ebpf/index.rst.
+
+.. Links:
+.. _man-pages: https://www.kernel.org/doc/man-pages/
+.. _bpf(2): https://man7.org/linux/man-pages/man2/bpf.2.html
+\ No newline at end of file
diff --git a/Documentation/bpf/test_debug.rst b/Documentation/bpf/test_debug.rst
new file mode 100644
index 000000000000..ebf0caceb6a6
--- /dev/null
+++ b/Documentation/bpf/test_debug.rst
@@ -0,0 +1,9 @@
+=========================
+Testing and debugging BPF
+=========================
+
+.. toctree::
+   :maxdepth: 1
+
+   drgn
+   s390
diff --git a/Documentation/bpf/verifier.rst b/Documentation/bpf/verifier.rst
new file mode 100644
index 000000000000..f0ec19db301c
--- /dev/null
+++ b/Documentation/bpf/verifier.rst
@@ -0,0 +1,824 @@
+
+=============
+eBPF verifier
+=============
+
+The safety of the eBPF program is determined in two steps.
+
+First step does DAG check to disallow loops and other CFG validation.
+In particular it will detect programs that have unreachable instructions.
+(though classic BPF checker allows them)
+
+Second step starts from the first insn and descends all possible paths.
+It simulates execution of every insn and observes the state change of
+registers and stack.
+
+At the start of the program the register R1 contains a pointer to context
+and has type PTR_TO_CTX.
+If verifier sees an insn that does R2=R1, then R2 has now type
+PTR_TO_CTX as well and can be used on the right hand side of expression.
+If R1=PTR_TO_CTX and insn is R2=R1+R1, then R2=SCALAR_VALUE,
+since addition of two valid pointers makes invalid pointer.
+(In 'secure' mode verifier will reject any type of pointer arithmetic to make
+sure that kernel addresses don't leak to unprivileged users)
+
+If register was never written to, it's not readable::
+
+  bpf_mov R0 = R2
+  bpf_exit
+
+will be rejected, since R2 is unreadable at the start of the program.
+
+After kernel function call, R1-R5 are reset to unreadable and
+R0 has a return type of the function.
+
+Since R6-R9 are callee saved, their state is preserved across the call.
+
+::
+
+  bpf_mov R6 = 1
+  bpf_call foo
+  bpf_mov R0 = R6
+  bpf_exit
+
+is a correct program. If there was R1 instead of R6, it would have
+been rejected.
+
+load/store instructions are allowed only with registers of valid types, which
+are PTR_TO_CTX, PTR_TO_MAP, PTR_TO_STACK. They are bounds and alignment checked.
+For example::
+
+ bpf_mov R1 = 1
+ bpf_mov R2 = 2
+ bpf_xadd *(u32 *)(R1 + 3) += R2
+ bpf_exit
+
+will be rejected, since R1 doesn't have a valid pointer type at the time of
+execution of instruction bpf_xadd.
+
+At the start R1 type is PTR_TO_CTX (a pointer to generic ``struct bpf_context``)
+A callback is used to customize verifier to restrict eBPF program access to only
+certain fields within ctx structure with specified size and alignment.
+
+For example, the following insn::
+
+  bpf_ld R0 = *(u32 *)(R6 + 8)
+
+intends to load a word from address R6 + 8 and store it into R0
+If R6=PTR_TO_CTX, via is_valid_access() callback the verifier will know
+that offset 8 of size 4 bytes can be accessed for reading, otherwise
+the verifier will reject the program.
+If R6=PTR_TO_STACK, then access should be aligned and be within
+stack bounds, which are [-MAX_BPF_STACK, 0). In this example offset is 8,
+so it will fail verification, since it's out of bounds.
+
+The verifier will allow eBPF program to read data from stack only after
+it wrote into it.
+
+Classic BPF verifier does similar check with M[0-15] memory slots.
+For example::
+
+  bpf_ld R0 = *(u32 *)(R10 - 4)
+  bpf_exit
+
+is invalid program.
+Though R10 is correct read-only register and has type PTR_TO_STACK
+and R10 - 4 is within stack bounds, there were no stores into that location.
+
+Pointer register spill/fill is tracked as well, since four (R6-R9)
+callee saved registers may not be enough for some programs.
+
+Allowed function calls are customized with bpf_verifier_ops->get_func_proto()
+The eBPF verifier will check that registers match argument constraints.
+After the call register R0 will be set to return type of the function.
+
+Function calls is a main mechanism to extend functionality of eBPF programs.
+Socket filters may let programs to call one set of functions, whereas tracing
+filters may allow completely different set.
+
+If a function made accessible to eBPF program, it needs to be thought through
+from safety point of view. The verifier will guarantee that the function is
+called with valid arguments.
+
+seccomp vs socket filters have different security restrictions for classic BPF.
+Seccomp solves this by two stage verifier: classic BPF verifier is followed
+by seccomp verifier. In case of eBPF one configurable verifier is shared for
+all use cases.
+
+See details of eBPF verifier in kernel/bpf/verifier.c
+
+Register value tracking
+=======================
+
+In order to determine the safety of an eBPF program, the verifier must track
+the range of possible values in each register and also in each stack slot.
+This is done with ``struct bpf_reg_state``, defined in include/linux/
+bpf_verifier.h, which unifies tracking of scalar and pointer values.  Each
+register state has a type, which is either NOT_INIT (the register has not been
+written to), SCALAR_VALUE (some value which is not usable as a pointer), or a
+pointer type.  The types of pointers describe their base, as follows:
+
+
+    PTR_TO_CTX
+			Pointer to bpf_context.
+    CONST_PTR_TO_MAP
+			Pointer to struct bpf_map.  "Const" because arithmetic
+			on these pointers is forbidden.
+    PTR_TO_MAP_VALUE
+			Pointer to the value stored in a map element.
+    PTR_TO_MAP_VALUE_OR_NULL
+			Either a pointer to a map value, or NULL; map accesses
+			(see maps.rst) return this type, which becomes a
+			PTR_TO_MAP_VALUE when checked != NULL. Arithmetic on
+			these pointers is forbidden.
+    PTR_TO_STACK
+			Frame pointer.
+    PTR_TO_PACKET
+			skb->data.
+    PTR_TO_PACKET_END
+			skb->data + headlen; arithmetic forbidden.
+    PTR_TO_SOCKET
+			Pointer to struct bpf_sock_ops, implicitly refcounted.
+    PTR_TO_SOCKET_OR_NULL
+			Either a pointer to a socket, or NULL; socket lookup
+			returns this type, which becomes a PTR_TO_SOCKET when
+			checked != NULL. PTR_TO_SOCKET is reference-counted,
+			so programs must release the reference through the
+			socket release function before the end of the program.
+			Arithmetic on these pointers is forbidden.
+
+However, a pointer may be offset from this base (as a result of pointer
+arithmetic), and this is tracked in two parts: the 'fixed offset' and 'variable
+offset'.  The former is used when an exactly-known value (e.g. an immediate
+operand) is added to a pointer, while the latter is used for values which are
+not exactly known.  The variable offset is also used in SCALAR_VALUEs, to track
+the range of possible values in the register.
+
+The verifier's knowledge about the variable offset consists of:
+
+* minimum and maximum values as unsigned
+* minimum and maximum values as signed
+
+* knowledge of the values of individual bits, in the form of a 'tnum': a u64
+  'mask' and a u64 'value'.  1s in the mask represent bits whose value is unknown;
+  1s in the value represent bits known to be 1.  Bits known to be 0 have 0 in both
+  mask and value; no bit should ever be 1 in both.  For example, if a byte is read
+  into a register from memory, the register's top 56 bits are known zero, while
+  the low 8 are unknown - which is represented as the tnum (0x0; 0xff).  If we
+  then OR this with 0x40, we get (0x40; 0xbf), then if we add 1 we get (0x0;
+  0x1ff), because of potential carries.
+
+Besides arithmetic, the register state can also be updated by conditional
+branches.  For instance, if a SCALAR_VALUE is compared > 8, in the 'true' branch
+it will have a umin_value (unsigned minimum value) of 9, whereas in the 'false'
+branch it will have a umax_value of 8.  A signed compare (with BPF_JSGT or
+BPF_JSGE) would instead update the signed minimum/maximum values.  Information
+from the signed and unsigned bounds can be combined; for instance if a value is
+first tested < 8 and then tested s> 4, the verifier will conclude that the value
+is also > 4 and s< 8, since the bounds prevent crossing the sign boundary.
+
+PTR_TO_PACKETs with a variable offset part have an 'id', which is common to all
+pointers sharing that same variable offset.  This is important for packet range
+checks: after adding a variable to a packet pointer register A, if you then copy
+it to another register B and then add a constant 4 to A, both registers will
+share the same 'id' but the A will have a fixed offset of +4.  Then if A is
+bounds-checked and found to be less than a PTR_TO_PACKET_END, the register B is
+now known to have a safe range of at least 4 bytes.  See 'Direct packet access',
+below, for more on PTR_TO_PACKET ranges.
+
+The 'id' field is also used on PTR_TO_MAP_VALUE_OR_NULL, common to all copies of
+the pointer returned from a map lookup.  This means that when one copy is
+checked and found to be non-NULL, all copies can become PTR_TO_MAP_VALUEs.
+As well as range-checking, the tracked information is also used for enforcing
+alignment of pointer accesses.  For instance, on most systems the packet pointer
+is 2 bytes after a 4-byte alignment.  If a program adds 14 bytes to that to jump
+over the Ethernet header, then reads IHL and adds (IHL * 4), the resulting
+pointer will have a variable offset known to be 4n+2 for some n, so adding the 2
+bytes (NET_IP_ALIGN) gives a 4-byte alignment and so word-sized accesses through
+that pointer are safe.
+The 'id' field is also used on PTR_TO_SOCKET and PTR_TO_SOCKET_OR_NULL, common
+to all copies of the pointer returned from a socket lookup. This has similar
+behaviour to the handling for PTR_TO_MAP_VALUE_OR_NULL->PTR_TO_MAP_VALUE, but
+it also handles reference tracking for the pointer. PTR_TO_SOCKET implicitly
+represents a reference to the corresponding ``struct sock``. To ensure that the
+reference is not leaked, it is imperative to NULL-check the reference and in
+the non-NULL case, and pass the valid reference to the socket release function.
+
+Direct packet access
+====================
+
+In cls_bpf and act_bpf programs the verifier allows direct access to the packet
+data via skb->data and skb->data_end pointers.
+Ex::
+
+    1:  r4 = *(u32 *)(r1 +80)  /* load skb->data_end */
+    2:  r3 = *(u32 *)(r1 +76)  /* load skb->data */
+    3:  r5 = r3
+    4:  r5 += 14
+    5:  if r5 > r4 goto pc+16
+    R1=ctx R3=pkt(id=0,off=0,r=14) R4=pkt_end R5=pkt(id=0,off=14,r=14) R10=fp
+    6:  r0 = *(u16 *)(r3 +12) /* access 12 and 13 bytes of the packet */
+
+this 2byte load from the packet is safe to do, since the program author
+did check ``if (skb->data + 14 > skb->data_end) goto err`` at insn #5 which
+means that in the fall-through case the register R3 (which points to skb->data)
+has at least 14 directly accessible bytes. The verifier marks it
+as R3=pkt(id=0,off=0,r=14).
+id=0 means that no additional variables were added to the register.
+off=0 means that no additional constants were added.
+r=14 is the range of safe access which means that bytes [R3, R3 + 14) are ok.
+Note that R5 is marked as R5=pkt(id=0,off=14,r=14). It also points
+to the packet data, but constant 14 was added to the register, so
+it now points to ``skb->data + 14`` and accessible range is [R5, R5 + 14 - 14)
+which is zero bytes.
+
+More complex packet access may look like::
+
+
+    R0=inv1 R1=ctx R3=pkt(id=0,off=0,r=14) R4=pkt_end R5=pkt(id=0,off=14,r=14) R10=fp
+    6:  r0 = *(u8 *)(r3 +7) /* load 7th byte from the packet */
+    7:  r4 = *(u8 *)(r3 +12)
+    8:  r4 *= 14
+    9:  r3 = *(u32 *)(r1 +76) /* load skb->data */
+    10:  r3 += r4
+    11:  r2 = r1
+    12:  r2 <<= 48
+    13:  r2 >>= 48
+    14:  r3 += r2
+    15:  r2 = r3
+    16:  r2 += 8
+    17:  r1 = *(u32 *)(r1 +80) /* load skb->data_end */
+    18:  if r2 > r1 goto pc+2
+    R0=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=pkt_end R2=pkt(id=2,off=8,r=8) R3=pkt(id=2,off=0,r=8) R4=inv(id=0,umax_value=3570,var_off=(0x0; 0xfffe)) R5=pkt(id=0,off=14,r=14) R10=fp
+    19:  r1 = *(u8 *)(r3 +4)
+
+The state of the register R3 is R3=pkt(id=2,off=0,r=8)
+id=2 means that two ``r3 += rX`` instructions were seen, so r3 points to some
+offset within a packet and since the program author did
+``if (r3 + 8 > r1) goto err`` at insn #18, the safe range is [R3, R3 + 8).
+The verifier only allows 'add'/'sub' operations on packet registers. Any other
+operation will set the register state to 'SCALAR_VALUE' and it won't be
+available for direct packet access.
+
+Operation ``r3 += rX`` may overflow and become less than original skb->data,
+therefore the verifier has to prevent that.  So when it sees ``r3 += rX``
+instruction and rX is more than 16-bit value, any subsequent bounds-check of r3
+against skb->data_end will not give us 'range' information, so attempts to read
+through the pointer will give "invalid access to packet" error.
+
+Ex. after insn ``r4 = *(u8 *)(r3 +12)`` (insn #7 above) the state of r4 is
+R4=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) which means that upper 56 bits
+of the register are guaranteed to be zero, and nothing is known about the lower
+8 bits. After insn ``r4 *= 14`` the state becomes
+R4=inv(id=0,umax_value=3570,var_off=(0x0; 0xfffe)), since multiplying an 8-bit
+value by constant 14 will keep upper 52 bits as zero, also the least significant
+bit will be zero as 14 is even.  Similarly ``r2 >>= 48`` will make
+R2=inv(id=0,umax_value=65535,var_off=(0x0; 0xffff)), since the shift is not sign
+extending.  This logic is implemented in adjust_reg_min_max_vals() function,
+which calls adjust_ptr_min_max_vals() for adding pointer to scalar (or vice
+versa) and adjust_scalar_min_max_vals() for operations on two scalars.
+
+The end result is that bpf program author can access packet directly
+using normal C code as::
+
+  void *data = (void *)(long)skb->data;
+  void *data_end = (void *)(long)skb->data_end;
+  struct eth_hdr *eth = data;
+  struct iphdr *iph = data + sizeof(*eth);
+  struct udphdr *udp = data + sizeof(*eth) + sizeof(*iph);
+
+  if (data + sizeof(*eth) + sizeof(*iph) + sizeof(*udp) > data_end)
+	  return 0;
+  if (eth->h_proto != htons(ETH_P_IP))
+	  return 0;
+  if (iph->protocol != IPPROTO_UDP || iph->ihl != 5)
+	  return 0;
+  if (udp->dest == 53 || udp->source == 9)
+	  ...;
+
+which makes such programs easier to write comparing to LD_ABS insn
+and significantly faster.
+
+Pruning
+=======
+
+The verifier does not actually walk all possible paths through the program.  For
+each new branch to analyse, the verifier looks at all the states it's previously
+been in when at this instruction.  If any of them contain the current state as a
+subset, the branch is 'pruned' - that is, the fact that the previous state was
+accepted implies the current state would be as well.  For instance, if in the
+previous state, r1 held a packet-pointer, and in the current state, r1 holds a
+packet-pointer with a range as long or longer and at least as strict an
+alignment, then r1 is safe.  Similarly, if r2 was NOT_INIT before then it can't
+have been used by any path from that point, so any value in r2 (including
+another NOT_INIT) is safe.  The implementation is in the function regsafe().
+Pruning considers not only the registers but also the stack (and any spilled
+registers it may hold).  They must all be safe for the branch to be pruned.
+This is implemented in states_equal().
+
+Some technical details about state pruning implementation could be found below.
+
+Register liveness tracking
+--------------------------
+
+In order to make state pruning effective, liveness state is tracked for each
+register and stack slot. The basic idea is to track which registers and stack
+slots are actually used during subseqeuent execution of the program, until
+program exit is reached. Registers and stack slots that were never used could be
+removed from the cached state thus making more states equivalent to a cached
+state. This could be illustrated by the following program::
+
+  0: call bpf_get_prandom_u32()
+  1: r1 = 0
+  2: if r0 == 0 goto +1
+  3: r0 = 1
+  --- checkpoint ---
+  4: r0 = r1
+  5: exit
+
+Suppose that a state cache entry is created at instruction #4 (such entries are
+also called "checkpoints" in the text below). The verifier could reach the
+instruction with one of two possible register states:
+
+* r0 = 1, r1 = 0
+* r0 = 0, r1 = 0
+
+However, only the value of register ``r1`` is important to successfully finish
+verification. The goal of the liveness tracking algorithm is to spot this fact
+and figure out that both states are actually equivalent.
+
+Data structures
+~~~~~~~~~~~~~~~
+
+Liveness is tracked using the following data structures::
+
+  enum bpf_reg_liveness {
+	REG_LIVE_NONE = 0,
+	REG_LIVE_READ32 = 0x1,
+	REG_LIVE_READ64 = 0x2,
+	REG_LIVE_READ = REG_LIVE_READ32 | REG_LIVE_READ64,
+	REG_LIVE_WRITTEN = 0x4,
+	REG_LIVE_DONE = 0x8,
+  };
+
+  struct bpf_reg_state {
+ 	...
+	struct bpf_reg_state *parent;
+ 	...
+	enum bpf_reg_liveness live;
+ 	...
+  };
+
+  struct bpf_stack_state {
+	struct bpf_reg_state spilled_ptr;
+	...
+  };
+
+  struct bpf_func_state {
+	struct bpf_reg_state regs[MAX_BPF_REG];
+        ...
+	struct bpf_stack_state *stack;
+  }
+
+  struct bpf_verifier_state {
+	struct bpf_func_state *frame[MAX_CALL_FRAMES];
+	struct bpf_verifier_state *parent;
+        ...
+  }
+
+* ``REG_LIVE_NONE`` is an initial value assigned to ``->live`` fields upon new
+  verifier state creation;
+
+* ``REG_LIVE_WRITTEN`` means that the value of the register (or stack slot) is
+  defined by some instruction verified between this verifier state's parent and
+  verifier state itself;
+
+* ``REG_LIVE_READ{32,64}`` means that the value of the register (or stack slot)
+  is read by a some child state of this verifier state;
+
+* ``REG_LIVE_DONE`` is a marker used by ``clean_verifier_state()`` to avoid
+  processing same verifier state multiple times and for some sanity checks;
+
+* ``->live`` field values are formed by combining ``enum bpf_reg_liveness``
+  values using bitwise or.
+
+Register parentage chains
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+In order to propagate information between parent and child states, a *register
+parentage chain* is established. Each register or stack slot is linked to a
+corresponding register or stack slot in its parent state via a ``->parent``
+pointer. This link is established upon state creation in ``is_state_visited()``
+and might be modified by ``set_callee_state()`` called from
+``__check_func_call()``.
+
+The rules for correspondence between registers / stack slots are as follows:
+
+* For the current stack frame, registers and stack slots of the new state are
+  linked to the registers and stack slots of the parent state with the same
+  indices.
+
+* For the outer stack frames, only caller saved registers (r6-r9) and stack
+  slots are linked to the registers and stack slots of the parent state with the
+  same indices.
+
+* When function call is processed a new ``struct bpf_func_state`` instance is
+  allocated, it encapsulates a new set of registers and stack slots. For this
+  new frame, parent links for r6-r9 and stack slots are set to nil, parent links
+  for r1-r5 are set to match caller r1-r5 parent links.
+
+This could be illustrated by the following diagram (arrows stand for
+``->parent`` pointers)::
+
+      ...                    ; Frame #0, some instructions
+  --- checkpoint #0 ---
+  1 : r6 = 42                ; Frame #0
+  --- checkpoint #1 ---
+  2 : call foo()             ; Frame #0
+      ...                    ; Frame #1, instructions from foo()
+  --- checkpoint #2 ---
+      ...                    ; Frame #1, instructions from foo()
+  --- checkpoint #3 ---
+      exit                   ; Frame #1, return from foo()
+  3 : r1 = r6                ; Frame #0  <- current state
+
+             +-------------------------------+-------------------------------+
+             |           Frame #0            |           Frame #1            |
+  Checkpoint +-------------------------------+-------------------------------+
+  #0         | r0 | r1-r5 | r6-r9 | fp-8 ... |
+             +-------------------------------+
+                ^    ^       ^       ^
+                |    |       |       |
+  Checkpoint +-------------------------------+
+  #1         | r0 | r1-r5 | r6-r9 | fp-8 ... |
+             +-------------------------------+
+                     ^       ^       ^
+                     |_______|_______|_______________
+                             |       |               |
+               nil  nil      |       |               |      nil     nil
+                |    |       |       |               |       |       |
+  Checkpoint +-------------------------------+-------------------------------+
+  #2         | r0 | r1-r5 | r6-r9 | fp-8 ... | r0 | r1-r5 | r6-r9 | fp-8 ... |
+             +-------------------------------+-------------------------------+
+                             ^       ^               ^       ^       ^
+               nil  nil      |       |               |       |       |
+                |    |       |       |               |       |       |
+  Checkpoint +-------------------------------+-------------------------------+
+  #3         | r0 | r1-r5 | r6-r9 | fp-8 ... | r0 | r1-r5 | r6-r9 | fp-8 ... |
+             +-------------------------------+-------------------------------+
+                             ^       ^
+               nil  nil      |       |
+                |    |       |       |
+  Current    +-------------------------------+
+  state      | r0 | r1-r5 | r6-r9 | fp-8 ... |
+             +-------------------------------+
+                             \
+                               r6 read mark is propagated via these links
+                               all the way up to checkpoint #1.
+                               The checkpoint #1 contains a write mark for r6
+                               because of instruction (1), thus read propagation
+                               does not reach checkpoint #0 (see section below).
+
+Liveness marks tracking
+~~~~~~~~~~~~~~~~~~~~~~~
+
+For each processed instruction, the verifier tracks read and written registers
+and stack slots. The main idea of the algorithm is that read marks propagate
+back along the state parentage chain until they hit a write mark, which 'screens
+off' earlier states from the read. The information about reads is propagated by
+function ``mark_reg_read()`` which could be summarized as follows::
+
+  mark_reg_read(struct bpf_reg_state *state, ...):
+      parent = state->parent
+      while parent:
+          if state->live & REG_LIVE_WRITTEN:
+              break
+          if parent->live & REG_LIVE_READ64:
+              break
+          parent->live |= REG_LIVE_READ64
+          state = parent
+          parent = state->parent
+
+Notes:
+
+* The read marks are applied to the **parent** state while write marks are
+  applied to the **current** state. The write mark on a register or stack slot
+  means that it is updated by some instruction in the straight-line code leading
+  from the parent state to the current state.
+
+* Details about REG_LIVE_READ32 are omitted.
+  
+* Function ``propagate_liveness()`` (see section :ref:`read_marks_for_cache_hits`)
+  might override the first parent link. Please refer to the comments in the
+  ``propagate_liveness()`` and ``mark_reg_read()`` source code for further
+  details.
+
+Because stack writes could have different sizes ``REG_LIVE_WRITTEN`` marks are
+applied conservatively: stack slots are marked as written only if write size
+corresponds to the size of the register, e.g. see function ``save_register_state()``.
+
+Consider the following example::
+
+  0: (*u64)(r10 - 8) = 0   ; define 8 bytes of fp-8
+  --- checkpoint #0 ---
+  1: (*u32)(r10 - 8) = 1   ; redefine lower 4 bytes
+  2: r1 = (*u32)(r10 - 8)  ; read lower 4 bytes defined at (1)
+  3: r2 = (*u32)(r10 - 4)  ; read upper 4 bytes defined at (0)
+
+As stated above, the write at (1) does not count as ``REG_LIVE_WRITTEN``. Should
+it be otherwise, the algorithm above wouldn't be able to propagate the read mark
+from (3) to checkpoint #0.
+
+Once the ``BPF_EXIT`` instruction is reached ``update_branch_counts()`` is
+called to update the ``->branches`` counter for each verifier state in a chain
+of parent verifier states. When the ``->branches`` counter reaches zero the
+verifier state becomes a valid entry in a set of cached verifier states.
+
+Each entry of the verifier states cache is post-processed by a function
+``clean_live_states()``. This function marks all registers and stack slots
+without ``REG_LIVE_READ{32,64}`` marks as ``NOT_INIT`` or ``STACK_INVALID``.
+Registers/stack slots marked in this way are ignored in function ``stacksafe()``
+called from ``states_equal()`` when a state cache entry is considered for
+equivalence with a current state.
+
+Now it is possible to explain how the example from the beginning of the section
+works::
+
+  0: call bpf_get_prandom_u32()
+  1: r1 = 0
+  2: if r0 == 0 goto +1
+  3: r0 = 1
+  --- checkpoint[0] ---
+  4: r0 = r1
+  5: exit
+
+* At instruction #2 branching point is reached and state ``{ r0 == 0, r1 == 0, pc == 4 }``
+  is pushed to states processing queue (pc stands for program counter).
+
+* At instruction #4:
+
+  * ``checkpoint[0]`` states cache entry is created: ``{ r0 == 1, r1 == 0, pc == 4 }``;
+  * ``checkpoint[0].r0`` is marked as written;
+  * ``checkpoint[0].r1`` is marked as read;
+
+* At instruction #5 exit is reached and ``checkpoint[0]`` can now be processed
+  by ``clean_live_states()``. After this processing ``checkpoint[0].r0`` has a
+  read mark and all other registers and stack slots are marked as ``NOT_INIT``
+  or ``STACK_INVALID``
+
+* The state ``{ r0 == 0, r1 == 0, pc == 4 }`` is popped from the states queue
+  and is compared against a cached state ``{ r1 == 0, pc == 4 }``, the states
+  are considered equivalent.
+
+.. _read_marks_for_cache_hits:
+  
+Read marks propagation for cache hits
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Another point is the handling of read marks when a previously verified state is
+found in the states cache. Upon cache hit verifier must behave in the same way
+as if the current state was verified to the program exit. This means that all
+read marks, present on registers and stack slots of the cached state, must be
+propagated over the parentage chain of the current state. Example below shows
+why this is important. Function ``propagate_liveness()`` handles this case.
+
+Consider the following state parentage chain (S is a starting state, A-E are
+derived states, -> arrows show which state is derived from which)::
+
+                   r1 read
+            <-------------                A[r1] == 0
+                                          C[r1] == 0
+      S ---> A ---> B ---> exit           E[r1] == 1
+      |
+      ` ---> C ---> D
+      |
+      ` ---> E      ^
+                    |___   suppose all these
+             ^           states are at insn #Y
+             |
+      suppose all these
+    states are at insn #X
+
+* Chain of states ``S -> A -> B -> exit`` is verified first.
+
+* While ``B -> exit`` is verified, register ``r1`` is read and this read mark is
+  propagated up to state ``A``.
+
+* When chain of states ``C -> D`` is verified the state ``D`` turns out to be
+  equivalent to state ``B``.
+
+* The read mark for ``r1`` has to be propagated to state ``C``, otherwise state
+  ``C`` might get mistakenly marked as equivalent to state ``E`` even though
+  values for register ``r1`` differ between ``C`` and ``E``.
+
+Understanding eBPF verifier messages
+====================================
+
+The following are few examples of invalid eBPF programs and verifier error
+messages as seen in the log:
+
+Program with unreachable instructions::
+
+  static struct bpf_insn prog[] = {
+  BPF_EXIT_INSN(),
+  BPF_EXIT_INSN(),
+  };
+
+Error::
+
+  unreachable insn 1
+
+Program that reads uninitialized register::
+
+  BPF_MOV64_REG(BPF_REG_0, BPF_REG_2),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (bf) r0 = r2
+  R2 !read_ok
+
+Program that doesn't initialize R0 before exiting::
+
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_1),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (bf) r2 = r1
+  1: (95) exit
+  R0 !read_ok
+
+Program that accesses stack out of bounds::
+
+    BPF_ST_MEM(BPF_DW, BPF_REG_10, 8, 0),
+    BPF_EXIT_INSN(),
+
+Error::
+
+    0: (7a) *(u64 *)(r10 +8) = 0
+    invalid stack off=8 size=8
+
+Program that doesn't initialize stack before passing its address into function::
+
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+  BPF_LD_MAP_FD(BPF_REG_1, 0),
+  BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (bf) r2 = r10
+  1: (07) r2 += -8
+  2: (b7) r1 = 0x0
+  3: (85) call 1
+  invalid indirect read from stack off -8+0 size 8
+
+Program that uses invalid map_fd=0 while calling to map_lookup_elem() function::
+
+  BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+  BPF_LD_MAP_FD(BPF_REG_1, 0),
+  BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (7a) *(u64 *)(r10 -8) = 0
+  1: (bf) r2 = r10
+  2: (07) r2 += -8
+  3: (b7) r1 = 0x0
+  4: (85) call 1
+  fd 0 is not pointing to valid bpf_map
+
+Program that doesn't check return value of map_lookup_elem() before accessing
+map element::
+
+  BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+  BPF_LD_MAP_FD(BPF_REG_1, 0),
+  BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
+  BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 0),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (7a) *(u64 *)(r10 -8) = 0
+  1: (bf) r2 = r10
+  2: (07) r2 += -8
+  3: (b7) r1 = 0x0
+  4: (85) call 1
+  5: (7a) *(u64 *)(r0 +0) = 0
+  R0 invalid mem access 'map_value_or_null'
+
+Program that correctly checks map_lookup_elem() returned value for NULL, but
+accesses the memory with incorrect alignment::
+
+  BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+  BPF_LD_MAP_FD(BPF_REG_1, 0),
+  BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
+  BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1),
+  BPF_ST_MEM(BPF_DW, BPF_REG_0, 4, 0),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (7a) *(u64 *)(r10 -8) = 0
+  1: (bf) r2 = r10
+  2: (07) r2 += -8
+  3: (b7) r1 = 1
+  4: (85) call 1
+  5: (15) if r0 == 0x0 goto pc+1
+   R0=map_ptr R10=fp
+  6: (7a) *(u64 *)(r0 +4) = 0
+  misaligned access off 4 size 8
+
+Program that correctly checks map_lookup_elem() returned value for NULL and
+accesses memory with correct alignment in one side of 'if' branch, but fails
+to do so in the other side of 'if' branch::
+
+  BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+  BPF_LD_MAP_FD(BPF_REG_1, 0),
+  BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem),
+  BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 2),
+  BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 0),
+  BPF_EXIT_INSN(),
+  BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 1),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (7a) *(u64 *)(r10 -8) = 0
+  1: (bf) r2 = r10
+  2: (07) r2 += -8
+  3: (b7) r1 = 1
+  4: (85) call 1
+  5: (15) if r0 == 0x0 goto pc+2
+   R0=map_ptr R10=fp
+  6: (7a) *(u64 *)(r0 +0) = 0
+  7: (95) exit
+
+  from 5 to 8: R0=imm0 R10=fp
+  8: (7a) *(u64 *)(r0 +0) = 1
+  R0 invalid mem access 'imm'
+
+Program that performs a socket lookup then sets the pointer to NULL without
+checking it::
+
+  BPF_MOV64_IMM(BPF_REG_2, 0),
+  BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_2, -8),
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+  BPF_MOV64_IMM(BPF_REG_3, 4),
+  BPF_MOV64_IMM(BPF_REG_4, 0),
+  BPF_MOV64_IMM(BPF_REG_5, 0),
+  BPF_EMIT_CALL(BPF_FUNC_sk_lookup_tcp),
+  BPF_MOV64_IMM(BPF_REG_0, 0),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (b7) r2 = 0
+  1: (63) *(u32 *)(r10 -8) = r2
+  2: (bf) r2 = r10
+  3: (07) r2 += -8
+  4: (b7) r3 = 4
+  5: (b7) r4 = 0
+  6: (b7) r5 = 0
+  7: (85) call bpf_sk_lookup_tcp#65
+  8: (b7) r0 = 0
+  9: (95) exit
+  Unreleased reference id=1, alloc_insn=7
+
+Program that performs a socket lookup but does not NULL-check the returned
+value::
+
+  BPF_MOV64_IMM(BPF_REG_2, 0),
+  BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_2, -8),
+  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+  BPF_MOV64_IMM(BPF_REG_3, 4),
+  BPF_MOV64_IMM(BPF_REG_4, 0),
+  BPF_MOV64_IMM(BPF_REG_5, 0),
+  BPF_EMIT_CALL(BPF_FUNC_sk_lookup_tcp),
+  BPF_EXIT_INSN(),
+
+Error::
+
+  0: (b7) r2 = 0
+  1: (63) *(u32 *)(r10 -8) = r2
+  2: (bf) r2 = r10
+  3: (07) r2 += -8
+  4: (b7) r3 = 4
+  5: (b7) r4 = 0
+  6: (b7) r5 = 0
+  7: (85) call bpf_sk_lookup_tcp#65
+  8: (95) exit
+  Unreleased reference id=1, alloc_insn=7
diff --git a/Documentation/cdrom/cdrom-standard.rst b/Documentation/cdrom/cdrom-standard.rst
index 5845960ca382..7964fe134277 100644
--- a/Documentation/cdrom/cdrom-standard.rst
+++ b/Documentation/cdrom/cdrom-standard.rst
@@ -218,7 +218,6 @@ current *struct* is::
 		int (*tray_move)(struct cdrom_device_info *, int);
 		int (*lock_door)(struct cdrom_device_info *, int);
 		int (*select_speed)(struct cdrom_device_info *, int);
-		int (*select_disc)(struct cdrom_device_info *, int);
 		int (*get_last_session) (struct cdrom_device_info *,
 					 struct cdrom_multisession *);
 		int (*get_mcn)(struct cdrom_device_info *, struct cdrom_mcn *);
@@ -421,15 +420,6 @@ return value indicates an error.
 
 ::
 
-	int select_disc(struct cdrom_device_info *cdi, int number)
-
-If the drive can store multiple discs (a juke-box) this function
-will perform disc selection. It should return the number of the
-selected disc on success, a negative value on error. Currently, only
-the ide-cd driver supports this functionality.
-
-::
-
 	int get_last_session(struct cdrom_device_info *cdi,
 			     struct cdrom_multisession *ms_info)
 
@@ -907,6 +897,17 @@ commands can be identified by the underscores in their names.
 	specifies the slot for which the information is given. The special
 	value *CDSL_CURRENT* requests that information about the currently
 	selected slot be returned.
+`CDROM_TIMED_MEDIA_CHANGE`
+	Checks whether the disc has been changed since a user supplied time
+	and returns the time of the last disc change.
+
+	*arg* is a pointer to a *cdrom_timed_media_change_info* struct.
+	*arg->last_media_change* may be set by calling code to signal
+	the timestamp of the last known media change (by the caller).
+	Upon successful return, this ioctl call will set
+	*arg->last_media_change* to the latest media change timestamp (in ms)
+	known by the kernel/driver and set *arg->has_changed* to 1 if
+	that timestamp is more recent than the timestamp set by the caller.
 `CDROM_DRIVE_STATUS`
 	Returns the status of the drive by a call to
 	*drive_status()*. Return values are defined in cdrom_drive_status_.
diff --git a/Documentation/cdrom/ide-cd.rst b/Documentation/cdrom/ide-cd.rst
deleted file mode 100644
index bdccb74fc92d..000000000000
--- a/Documentation/cdrom/ide-cd.rst
+++ /dev/null
@@ -1,538 +0,0 @@
-IDE-CD driver documentation
-===========================
-
-:Originally by: scott snyder  <snyder@fnald0.fnal.gov> (19 May 1996)
-:Carrying on the torch is: Erik Andersen <andersee@debian.org>
-:New maintainers (19 Oct 1998): Jens Axboe <axboe@image.dk>
-
-1. Introduction
----------------
-
-The ide-cd driver should work with all ATAPI ver 1.2 to ATAPI 2.6 compliant
-CDROM drives which attach to an IDE interface.  Note that some CDROM vendors
-(including Mitsumi, Sony, Creative, Aztech, and Goldstar) have made
-both ATAPI-compliant drives and drives which use a proprietary
-interface.  If your drive uses one of those proprietary interfaces,
-this driver will not work with it (but one of the other CDROM drivers
-probably will).  This driver will not work with `ATAPI` drives which
-attach to the parallel port.  In addition, there is at least one drive
-(CyCDROM CR520ie) which attaches to the IDE port but is not ATAPI;
-this driver will not work with drives like that either (but see the
-aztcd driver).
-
-This driver provides the following features:
-
- - Reading from data tracks, and mounting ISO 9660 filesystems.
-
- - Playing audio tracks.  Most of the CDROM player programs floating
-   around should work; I usually use Workman.
-
- - Multisession support.
-
- - On drives which support it, reading digital audio data directly
-   from audio tracks.  The program cdda2wav can be used for this.
-   Note, however, that only some drives actually support this.
-
- - There is now support for CDROM changers which comply with the
-   ATAPI 2.6 draft standard (such as the NEC CDR-251).  This additional
-   functionality includes a function call to query which slot is the
-   currently selected slot, a function call to query which slots contain
-   CDs, etc. A sample program which demonstrates this functionality is
-   appended to the end of this file.  The Sanyo 3-disc changer
-   (which does not conform to the standard) is also now supported.
-   Please note the driver refers to the first CD as slot # 0.
-
-
-2. Installation
----------------
-
-0. The ide-cd relies on the ide disk driver.  See
-   Documentation/ide/ide.rst for up-to-date information on the ide
-   driver.
-
-1. Make sure that the ide and ide-cd drivers are compiled into the
-   kernel you're using.  When configuring the kernel, in the section
-   entitled "Floppy, IDE, and other block devices", say either `Y`
-   (which will compile the support directly into the kernel) or `M`
-   (to compile support as a module which can be loaded and unloaded)
-   to the options::
-
-      ATA/ATAPI/MFM/RLL support
-      Include IDE/ATAPI CDROM support
-
-   Depending on what type of IDE interface you have, you may need to
-   specify additional configuration options.  See
-   Documentation/ide/ide.rst.
-
-2. You should also ensure that the iso9660 filesystem is either
-   compiled into the kernel or available as a loadable module.  You
-   can see if a filesystem is known to the kernel by catting
-   /proc/filesystems.
-
-3. The CDROM drive should be connected to the host on an IDE
-   interface.  Each interface on a system is defined by an I/O port
-   address and an IRQ number, the standard assignments being
-   0x1f0 and 14 for the primary interface and 0x170 and 15 for the
-   secondary interface.  Each interface can control up to two devices,
-   where each device can be a hard drive, a CDROM drive, a floppy drive,
-   or a tape drive.  The two devices on an interface are called `master`
-   and `slave`; this is usually selectable via a jumper on the drive.
-
-   Linux names these devices as follows.  The master and slave devices
-   on the primary IDE interface are called `hda` and `hdb`,
-   respectively.  The drives on the secondary interface are called
-   `hdc` and `hdd`.  (Interfaces at other locations get other letters
-   in the third position; see Documentation/ide/ide.rst.)
-
-   If you want your CDROM drive to be found automatically by the
-   driver, you should make sure your IDE interface uses either the
-   primary or secondary addresses mentioned above.  In addition, if
-   the CDROM drive is the only device on the IDE interface, it should
-   be jumpered as `master`.  (If for some reason you cannot configure
-   your system in this manner, you can probably still use the driver.
-   You may have to pass extra configuration information to the kernel
-   when you boot, however.  See Documentation/ide/ide.rst for more
-   information.)
-
-4. Boot the system.  If the drive is recognized, you should see a
-   message which looks like::
-
-     hdb: NEC CD-ROM DRIVE:260, ATAPI CDROM drive
-
-   If you do not see this, see section 5 below.
-
-5. You may want to create a symbolic link /dev/cdrom pointing to the
-   actual device.  You can do this with the command::
-
-     ln -s  /dev/hdX  /dev/cdrom
-
-   where X should be replaced by the letter indicating where your
-   drive is installed.
-
-6. You should be able to see any error messages from the driver with
-   the `dmesg` command.
-
-
-3. Basic usage
---------------
-
-An ISO 9660 CDROM can be mounted by putting the disc in the drive and
-typing (as root)::
-
-  mount -t iso9660 /dev/cdrom /mnt/cdrom
-
-where it is assumed that /dev/cdrom is a link pointing to the actual
-device (as described in step 5 of the last section) and /mnt/cdrom is
-an empty directory.  You should now be able to see the contents of the
-CDROM under the /mnt/cdrom directory.  If you want to eject the CDROM,
-you must first dismount it with a command like::
-
-  umount /mnt/cdrom
-
-Note that audio CDs cannot be mounted.
-
-Some distributions set up /etc/fstab to always try to mount a CDROM
-filesystem on bootup.  It is not required to mount the CDROM in this
-manner, though, and it may be a nuisance if you change CDROMs often.
-You should feel free to remove the cdrom line from /etc/fstab and
-mount CDROMs manually if that suits you better.
-
-Multisession and photocd discs should work with no special handling.
-The hpcdtoppm package (ftp.gwdg.de:/pub/linux/hpcdtoppm/) may be
-useful for reading photocds.
-
-To play an audio CD, you should first unmount and remove any data
-CDROM.  Any of the CDROM player programs should then work (workman,
-workbone, cdplayer, etc.).
-
-On a few drives, you can read digital audio directly using a program
-such as cdda2wav.  The only types of drive which I've heard support
-this are Sony and Toshiba drives.  You will get errors if you try to
-use this function on a drive which does not support it.
-
-For supported changers, you can use the `cdchange` program (appended to
-the end of this file) to switch between changer slots.  Note that the
-drive should be unmounted before attempting this.  The program takes
-two arguments:  the CDROM device, and the slot number to which you wish
-to change.  If the slot number is -1, the drive is unloaded.
-
-
-4. Common problems
-------------------
-
-This section discusses some common problems encountered when trying to
-use the driver, and some possible solutions.  Note that if you are
-experiencing problems, you should probably also review
-Documentation/ide/ide.rst for current information about the underlying
-IDE support code.  Some of these items apply only to earlier versions
-of the driver, but are mentioned here for completeness.
-
-In most cases, you should probably check with `dmesg` for any errors
-from the driver.
-
-a. Drive is not detected during booting.
-
-   - Review the configuration instructions above and in
-     Documentation/ide/ide.rst, and check how your hardware is
-     configured.
-
-   - If your drive is the only device on an IDE interface, it should
-     be jumpered as master, if at all possible.
-
-   - If your IDE interface is not at the standard addresses of 0x170
-     or 0x1f0, you'll need to explicitly inform the driver using a
-     lilo option.  See Documentation/ide/ide.rst.  (This feature was
-     added around kernel version 1.3.30.)
-
-   - If the autoprobing is not finding your drive, you can tell the
-     driver to assume that one exists by using a lilo option of the
-     form `hdX=cdrom`, where X is the drive letter corresponding to
-     where your drive is installed.  Note that if you do this and you
-     see a boot message like::
-
-       hdX: ATAPI cdrom (?)
-
-     this does _not_ mean that the driver has successfully detected
-     the drive; rather, it means that the driver has not detected a
-     drive, but is assuming there's one there anyway because you told
-     it so.  If you actually try to do I/O to a drive defined at a
-     nonexistent or nonresponding I/O address, you'll probably get
-     errors with a status value of 0xff.
-
-   - Some IDE adapters require a nonstandard initialization sequence
-     before they'll function properly.  (If this is the case, there
-     will often be a separate MS-DOS driver just for the controller.)
-     IDE interfaces on sound cards often fall into this category.
-
-     Support for some interfaces needing extra initialization is
-     provided in later 1.3.x kernels.  You may need to turn on
-     additional kernel configuration options to get them to work;
-     see Documentation/ide/ide.rst.
-
-     Even if support is not available for your interface, you may be
-     able to get it to work with the following procedure.  First boot
-     MS-DOS and load the appropriate drivers.  Then warm-boot linux
-     (i.e., without powering off).  If this works, it can be automated
-     by running loadlin from the MS-DOS autoexec.
-
-
-b. Timeout/IRQ errors.
-
-  - If you always get timeout errors, interrupts from the drive are
-    probably not making it to the host.
-
-  - IRQ problems may also be indicated by the message
-    `IRQ probe failed (<n>)` while booting.  If <n> is zero, that
-    means that the system did not see an interrupt from the drive when
-    it was expecting one (on any feasible IRQ).  If <n> is negative,
-    that means the system saw interrupts on multiple IRQ lines, when
-    it was expecting to receive just one from the CDROM drive.
-
-  - Double-check your hardware configuration to make sure that the IRQ
-    number of your IDE interface matches what the driver expects.
-    (The usual assignments are 14 for the primary (0x1f0) interface
-    and 15 for the secondary (0x170) interface.)  Also be sure that
-    you don't have some other hardware which might be conflicting with
-    the IRQ you're using.  Also check the BIOS setup for your system;
-    some have the ability to disable individual IRQ levels, and I've
-    had one report of a system which was shipped with IRQ 15 disabled
-    by default.
-
-  - Note that many MS-DOS CDROM drivers will still function even if
-    there are hardware problems with the interrupt setup; they
-    apparently don't use interrupts.
-
-  - If you own a Pioneer DR-A24X, you _will_ get nasty error messages
-    on boot such as "irq timeout: status=0x50 { DriveReady SeekComplete }"
-    The Pioneer DR-A24X CDROM drives are fairly popular these days.
-    Unfortunately, these drives seem to become very confused when we perform
-    the standard Linux ATA disk drive probe. If you own one of these drives,
-    you can bypass the ATA probing which confuses these CDROM drives, by
-    adding `append="hdX=noprobe hdX=cdrom"` to your lilo.conf file and running
-    lilo (again where X is the drive letter corresponding to where your drive
-    is installed.)
-
-c. System hangups.
-
-  - If the system locks up when you try to access the CDROM, the most
-    likely cause is that you have a buggy IDE adapter which doesn't
-    properly handle simultaneous transactions on multiple interfaces.
-    The most notorious of these is the CMD640B chip.  This problem can
-    be worked around by specifying the `serialize` option when
-    booting.  Recent kernels should be able to detect the need for
-    this automatically in most cases, but the detection is not
-    foolproof.  See Documentation/ide/ide.rst for more information
-    about the `serialize` option and the CMD640B.
-
-  - Note that many MS-DOS CDROM drivers will work with such buggy
-    hardware, apparently because they never attempt to overlap CDROM
-    operations with other disk activity.
-
-
-d. Can't mount a CDROM.
-
-  - If you get errors from mount, it may help to check `dmesg` to see
-    if there are any more specific errors from the driver or from the
-    filesystem.
-
-  - Make sure there's a CDROM loaded in the drive, and that's it's an
-    ISO 9660 disc.  You can't mount an audio CD.
-
-  - With the CDROM in the drive and unmounted, try something like::
-
-      cat /dev/cdrom | od | more
-
-    If you see a dump, then the drive and driver are probably working
-    OK, and the problem is at the filesystem level (i.e., the CDROM is
-    not ISO 9660 or has errors in the filesystem structure).
-
-  - If you see `not a block device` errors, check that the definitions
-    of the device special files are correct.  They should be as
-    follows::
-
-      brw-rw----   1 root     disk       3,   0 Nov 11 18:48 /dev/hda
-      brw-rw----   1 root     disk       3,  64 Nov 11 18:48 /dev/hdb
-      brw-rw----   1 root     disk      22,   0 Nov 11 18:48 /dev/hdc
-      brw-rw----   1 root     disk      22,  64 Nov 11 18:48 /dev/hdd
-
-    Some early Slackware releases had these defined incorrectly.  If
-    these are wrong, you can remake them by running the script
-    scripts/MAKEDEV.ide.  (You may have to make it executable
-    with chmod first.)
-
-    If you have a /dev/cdrom symbolic link, check that it is pointing
-    to the correct device file.
-
-    If you hear people talking of the devices `hd1a` and `hd1b`, these
-    were old names for what are now called hdc and hdd.  Those names
-    should be considered obsolete.
-
-  - If mount is complaining that the iso9660 filesystem is not
-    available, but you know it is (check /proc/filesystems), you
-    probably need a newer version of mount.  Early versions would not
-    always give meaningful error messages.
-
-
-e. Directory listings are unpredictably truncated, and `dmesg` shows
-   `buffer botch` error messages from the driver.
-
-  - There was a bug in the version of the driver in 1.2.x kernels
-    which could cause this.  It was fixed in 1.3.0.  If you can't
-    upgrade, you can probably work around the problem by specifying a
-    blocksize of 2048 when mounting.  (Note that you won't be able to
-    directly execute binaries off the CDROM in that case.)
-
-    If you see this in kernels later than 1.3.0, please report it as a
-    bug.
-
-
-f. Data corruption.
-
-  - Random data corruption was occasionally observed with the Hitachi
-    CDR-7730 CDROM. If you experience data corruption, using "hdx=slow"
-    as a command line parameter may work around the problem, at the
-    expense of low system performance.
-
-
-5. cdchange.c
--------------
-
-::
-
-  /*
-   * cdchange.c  [-v]  <device>  [<slot>]
-   *
-   * This loads a CDROM from a specified slot in a changer, and displays
-   * information about the changer status.  The drive should be unmounted before
-   * using this program.
-   *
-   * Changer information is displayed if either the -v flag is specified
-   * or no slot was specified.
-   *
-   * Based on code originally from Gerhard Zuber <zuber@berlin.snafu.de>.
-   * Changer status information, and rewrite for the new Uniform CDROM driver
-   * interface by Erik Andersen <andersee@debian.org>.
-   */
-
-  #include <stdio.h>
-  #include <stdlib.h>
-  #include <errno.h>
-  #include <string.h>
-  #include <unistd.h>
-  #include <fcntl.h>
-  #include <sys/ioctl.h>
-  #include <linux/cdrom.h>
-
-
-  int
-  main (int argc, char **argv)
-  {
-	char *program;
-	char *device;
-	int fd;           /* file descriptor for CD-ROM device */
-	int status;       /* return status for system calls */
-	int verbose = 0;
-	int slot=-1, x_slot;
-	int total_slots_available;
-
-	program = argv[0];
-
-	++argv;
-	--argc;
-
-	if (argc < 1 || argc > 3) {
-		fprintf (stderr, "usage: %s [-v] <device> [<slot>]\n",
-			 program);
-		fprintf (stderr, "       Slots are numbered 1 -- n.\n");
-		exit (1);
-	}
-
-       if (strcmp (argv[0], "-v") == 0) {
-                verbose = 1;
-                ++argv;
-                --argc;
-        }
-
-	device = argv[0];
-
-	if (argc == 2)
-		slot = atoi (argv[1]) - 1;
-
-	/* open device */
-	fd = open(device, O_RDONLY | O_NONBLOCK);
-	if (fd < 0) {
-		fprintf (stderr, "%s: open failed for `%s`: %s\n",
-			 program, device, strerror (errno));
-		exit (1);
-	}
-
-	/* Check CD player status */
-	total_slots_available = ioctl (fd, CDROM_CHANGER_NSLOTS);
-	if (total_slots_available <= 1 ) {
-		fprintf (stderr, "%s: Device `%s` is not an ATAPI "
-			"compliant CD changer.\n", program, device);
-		exit (1);
-	}
-
-	if (slot >= 0) {
-		if (slot >= total_slots_available) {
-			fprintf (stderr, "Bad slot number.  "
-				 "Should be 1 -- %d.\n",
-				 total_slots_available);
-			exit (1);
-		}
-
-		/* load */
-		slot=ioctl (fd, CDROM_SELECT_DISC, slot);
-		if (slot<0) {
-			fflush(stdout);
-				perror ("CDROM_SELECT_DISC ");
-			exit(1);
-		}
-	}
-
-	if (slot < 0 || verbose) {
-
-		status=ioctl (fd, CDROM_SELECT_DISC, CDSL_CURRENT);
-		if (status<0) {
-			fflush(stdout);
-			perror (" CDROM_SELECT_DISC");
-			exit(1);
-		}
-		slot=status;
-
-		printf ("Current slot: %d\n", slot+1);
-		printf ("Total slots available: %d\n",
-			total_slots_available);
-
-		printf ("Drive status: ");
-                status = ioctl (fd, CDROM_DRIVE_STATUS, CDSL_CURRENT);
-                if (status<0) {
-                  perror(" CDROM_DRIVE_STATUS");
-                } else switch(status) {
-		case CDS_DISC_OK:
-			printf ("Ready.\n");
-			break;
-		case CDS_TRAY_OPEN:
-			printf ("Tray Open.\n");
-			break;
-		case CDS_DRIVE_NOT_READY:
-			printf ("Drive Not Ready.\n");
-			break;
-		default:
-			printf ("This Should not happen!\n");
-			break;
-		}
-
-		for (x_slot=0; x_slot<total_slots_available; x_slot++) {
-			printf ("Slot %2d: ", x_slot+1);
-			status = ioctl (fd, CDROM_DRIVE_STATUS, x_slot);
-			if (status<0) {
-			     perror(" CDROM_DRIVE_STATUS");
-			} else switch(status) {
-			case CDS_DISC_OK:
-				printf ("Disc present.");
-				break;
-			case CDS_NO_DISC:
-				printf ("Empty slot.");
-				break;
-			case CDS_TRAY_OPEN:
-				printf ("CD-ROM tray open.\n");
-				break;
-			case CDS_DRIVE_NOT_READY:
-				printf ("CD-ROM drive not ready.\n");
-				break;
-			case CDS_NO_INFO:
-				printf ("No Information available.");
-				break;
-			default:
-				printf ("This Should not happen!\n");
-				break;
-			}
-		  if (slot == x_slot) {
-                  status = ioctl (fd, CDROM_DISC_STATUS);
-                  if (status<0) {
-			perror(" CDROM_DISC_STATUS");
-                  }
-		  switch (status) {
-			case CDS_AUDIO:
-				printf ("\tAudio disc.\t");
-				break;
-			case CDS_DATA_1:
-			case CDS_DATA_2:
-				printf ("\tData disc type %d.\t", status-CDS_DATA_1+1);
-				break;
-			case CDS_XA_2_1:
-			case CDS_XA_2_2:
-				printf ("\tXA data disc type %d.\t", status-CDS_XA_2_1+1);
-				break;
-			default:
-				printf ("\tUnknown disc type 0x%x!\t", status);
-				break;
-			}
-			}
-			status = ioctl (fd, CDROM_MEDIA_CHANGED, x_slot);
-			if (status<0) {
-				perror(" CDROM_MEDIA_CHANGED");
-			}
-			switch (status) {
-			case 1:
-				printf ("Changed.\n");
-				break;
-			default:
-				printf ("\n");
-				break;
-			}
-		}
-	}
-
-	/* close device */
-	status = close (fd);
-	if (status != 0) {
-		fprintf (stderr, "%s: close failed for `%s`: %s\n",
-			 program, device, strerror (errno));
-		exit (1);
-	}
-
-	exit (0);
-  }
diff --git a/Documentation/cdrom/index.rst b/Documentation/cdrom/index.rst
index 338ad5f94e7c..e87a8785bc1a 100644
--- a/Documentation/cdrom/index.rst
+++ b/Documentation/cdrom/index.rst
@@ -8,7 +8,6 @@ cdrom
     :maxdepth: 1
 
     cdrom-standard
-    ide-cd
     packet-writing
 
 .. only::  subproject and html
diff --git a/Documentation/cdrom/packet-writing.rst b/Documentation/cdrom/packet-writing.rst
index c5c957195a5a..43db58c50d29 100644
--- a/Documentation/cdrom/packet-writing.rst
+++ b/Documentation/cdrom/packet-writing.rst
@@ -11,7 +11,7 @@ Getting started quick
 - Compile and install kernel and modules, reboot.
 
 - You need the udftools package (pktsetup, mkudffs, cdrwtool).
-  Download from http://sourceforge.net/projects/linux-udf/
+  Download from https://github.com/pali/udftools
 
 - Grab a new CD-RW disc and format it (assuming CD-RW is hdc, substitute
   as appropriate)::
@@ -102,7 +102,7 @@ Using the pktcdvd sysfs interface
 
 Since Linux 2.6.20, the pktcdvd module has a sysfs interface
 and can be controlled by it. For example the "pktcdvd" tool uses
-this interface. (see http://tom.ist-im-web.de/download/pktcdvd )
+this interface. (see http://tom.ist-im-web.de/linux/software/pktcdvd )
 
 "pktcdvd" works similar to "pktsetup", e.g.::
 
diff --git a/Documentation/conf.py b/Documentation/conf.py
index 948a97d6387d..37314afd1ac8 100644
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -15,10 +15,28 @@
 import sys
 import os
 import sphinx
+import shutil
+
+# helper
+# ------
+
+def have_command(cmd):
+    """Search ``cmd`` in the ``PATH`` environment.
+
+    If found, return True.
+    If not found, return False.
+    """
+    return shutil.which(cmd) is not None
 
 # Get Sphinx version
 major, minor, patch = sphinx.version_info[:3]
 
+#
+# Warn about older versions that we don't want to support for much
+# longer.
+#
+if (major < 2) or (major == 2 and minor < 4):
+    print('WARNING: support for Sphinx < 2.4 will be removed soon.')
 
 # If extensions (or modules to document with autodoc) are in another directory,
 # add these directories to sys.path here. If the directory is relative to the
@@ -86,6 +104,7 @@ if major >= 3:
             "__used",
             "__weak",
             "noinline",
+            "__fix_address",
 
             # include/linux/memblock.h:
             "__init_memblock",
@@ -97,6 +116,9 @@ if major >= 3:
 
             # include/linux/linkage.h:
             "asmlinkage",
+
+            # include/linux/btf.h
+            "__bpf_kfunc",
         ]
 
 else:
@@ -106,10 +128,35 @@ else:
 autosectionlabel_prefix_document = True
 autosectionlabel_maxdepth = 2
 
-extensions.append("sphinx.ext.imgmath")
+# Load math renderer:
+# For html builder, load imgmath only when its dependencies are met.
+# mathjax is the default math renderer since Sphinx 1.8.
+have_latex =  have_command('latex')
+have_dvipng = have_command('dvipng')
+load_imgmath = have_latex and have_dvipng
+
+# Respect SPHINX_IMGMATH (for html docs only)
+if 'SPHINX_IMGMATH' in os.environ:
+    env_sphinx_imgmath = os.environ['SPHINX_IMGMATH']
+    if 'yes' in env_sphinx_imgmath:
+        load_imgmath = True
+    elif 'no' in env_sphinx_imgmath:
+        load_imgmath = False
+    else:
+        sys.stderr.write("Unknown env SPHINX_IMGMATH=%s ignored.\n" % env_sphinx_imgmath)
+
+# Always load imgmath for Sphinx <1.8 or for epub docs
+load_imgmath = (load_imgmath or (major == 1 and minor < 8)
+                or 'epub' in sys.argv)
+
+if load_imgmath:
+    extensions.append("sphinx.ext.imgmath")
+    math_renderer = 'imgmath'
+else:
+    math_renderer = 'mathjax'
 
 # Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
+templates_path = ['sphinx/templates']
 
 # The suffix(es) of source filenames.
 # You can specify multiple suffix as a list of string:
@@ -156,12 +203,30 @@ finally:
     else:
         version = release = "unknown version"
 
+#
+# HACK: there seems to be no easy way for us to get at the version and
+# release information passed in from the makefile...so go pawing through the
+# command-line options and find it for ourselves.
+#
+def get_cline_version():
+    c_version = c_release = ''
+    for arg in sys.argv:
+        if arg.startswith('version='):
+            c_version = arg[8:]
+        elif arg.startswith('release='):
+            c_release = arg[8:]
+    if c_version:
+        if c_release:
+            return c_version + '-' + c_release
+        return c_version
+    return version # Whatever we came up with before
+
 # The language for content autogenerated by Sphinx. Refer to documentation
 # for a list of supported languages.
 #
 # This is also used if you do content translation via gettext catalogs.
 # Usually you set "language" from the command line for these cases.
-language = None
+language = 'en'
 
 # There are two options for replacing |today|: either, you set today to some
 # non-false value, then it is used:
@@ -208,112 +273,88 @@ highlight_language = 'none'
 # The theme to use for HTML and HTML Help pages.  See the documentation for
 # a list of builtin themes.
 
-# The Read the Docs theme is available from
-# - https://github.com/snide/sphinx_rtd_theme
-# - https://pypi.python.org/pypi/sphinx_rtd_theme
-# - python-sphinx-rtd-theme package (on Debian)
-try:
-    import sphinx_rtd_theme
-    html_theme = 'sphinx_rtd_theme'
-    html_theme_path = [sphinx_rtd_theme.get_html_theme_path()]
-except ImportError:
-    sys.stderr.write('Warning: The Sphinx \'sphinx_rtd_theme\' HTML theme was not found. Make sure you have the theme installed to produce pretty HTML output. Falling back to the default theme.\n')
-
-# Theme options are theme-specific and customize the look and feel of a theme
-# further.  For a list of options available for each theme, see the
-# documentation.
-#html_theme_options = {}
-
-# Add any paths that contain custom themes here, relative to this directory.
-#html_theme_path = []
-
-# The name for this set of Sphinx documents.  If None, it defaults to
-# "<project> v<release> documentation".
-#html_title = None
-
-# A shorter title for the navigation bar.  Default is the same as html_title.
-#html_short_title = None
+# Default theme
+html_theme = 'alabaster'
+html_css_files = []
 
-# The name of an image file (relative to this directory) to place at the top
-# of the sidebar.
-#html_logo = None
+if "DOCS_THEME" in os.environ:
+    html_theme = os.environ["DOCS_THEME"]
 
-# The name of an image file (within the static path) to use as favicon of the
-# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
-# pixels large.
-#html_favicon = None
+if html_theme == 'sphinx_rtd_theme' or html_theme == 'sphinx_rtd_dark_mode':
+    # Read the Docs theme
+    try:
+        import sphinx_rtd_theme
+        html_theme_path = [sphinx_rtd_theme.get_html_theme_path()]
 
-# Add any paths that contain custom static files (such as style sheets) here,
-# relative to this directory. They are copied after the builtin static files,
-# so a file named "default.css" will overwrite the builtin "default.css".
-
-html_static_path = ['sphinx-static']
-
-html_context = {
-    'css_files': [
-        '_static/theme_overrides.css',
-    ],
-}
-
-# Add any extra paths that contain custom files (such as robots.txt or
-# .htaccess) here, relative to this directory. These files are copied
-# directly to the root of the documentation.
-#html_extra_path = []
-
-# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
-# using the given strftime format.
-#html_last_updated_fmt = '%b %d, %Y'
+        # Add any paths that contain custom static files (such as style sheets) here,
+        # relative to this directory. They are copied after the builtin static files,
+        # so a file named "default.css" will overwrite the builtin "default.css".
+        html_css_files = [
+            'theme_overrides.css',
+        ]
 
-# If true, SmartyPants will be used to convert quotes and dashes to
-# typographically correct entities.
-html_use_smartypants = False
+        # Read the Docs dark mode override theme
+        if html_theme == 'sphinx_rtd_dark_mode':
+            try:
+                import sphinx_rtd_dark_mode
+                extensions.append('sphinx_rtd_dark_mode')
+            except ImportError:
+                html_theme == 'sphinx_rtd_theme'
 
-# Custom sidebar templates, maps document names to template names.
-#html_sidebars = {}
+        if html_theme == 'sphinx_rtd_theme':
+                # Add color-specific RTD normal mode
+                html_css_files.append('theme_rtd_colors.css')
 
-# Additional templates that should be rendered to pages, maps page names to
-# template names.
-#html_additional_pages = {}
+        html_theme_options = {
+            'navigation_depth': -1,
+        }
 
-# If false, no module index is generated.
-#html_domain_indices = True
+    except ImportError:
+        html_theme = 'alabaster'
 
-# If false, no index is generated.
-#html_use_index = True
+if "DOCS_CSS" in os.environ:
+    css = os.environ["DOCS_CSS"].split(" ")
 
-# If true, the index is split into individual pages for each letter.
-#html_split_index = False
+    for l in css:
+        html_css_files.append(l)
 
-# If true, links to the reST sources are added to the pages.
-#html_show_sourcelink = True
-
-# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-#html_show_sphinx = True
+if major <= 1 and minor < 8:
+    html_context = {
+        'css_files': [],
+    }
 
-# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-#html_show_copyright = True
+    for l in html_css_files:
+        html_context['css_files'].append('_static/' + l)
+
+if  html_theme == 'alabaster':
+    html_theme_options = {
+        'description': get_cline_version(),
+        'page_width': '65em',
+        'sidebar_width': '15em',
+        'fixed_sidebar': 'true',
+        'font_size': 'inherit',
+        'font_family': 'serif',
+    }
 
-# If true, an OpenSearch description file will be output, and all pages will
-# contain a <link> tag referring to it.  The value of this option must be the
-# base URL from which the finished HTML is served.
-#html_use_opensearch = ''
+sys.stderr.write("Using %s theme\n" % html_theme)
 
-# This is the file name suffix for HTML files (e.g. ".xhtml").
-#html_file_suffix = None
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['sphinx-static']
 
-# Language to be used for generating the HTML full-text search index.
-# Sphinx supports the following languages:
-#   'da', 'de', 'en', 'es', 'fi', 'fr', 'h', 'it', 'ja'
-#   'nl', 'no', 'pt', 'ro', 'r', 'sv', 'tr'
-#html_search_language = 'en'
+# If true, Docutils "smart quotes" will be used to convert quotes and dashes
+# to typographically correct entities.  This will convert "--" to "—",
+# which is not always what we want, so disable it.
+smartquotes = False
 
-# A dictionary with options for the search language support, empty by default.
-# Now only 'ja' uses this config value
-#html_search_options = {'type': 'default'}
+# Custom sidebar templates, maps document names to template names.
+# Note that the RTD theme ignores this
+html_sidebars = { '**': ['searchbox.html', 'kernel-toc.html', 'sourcelink.html']}
 
-# The name of a javascript file (relative to the configuration directory) that
-# implements a search results scorer. If empty, the default will be used.
-#html_search_scorer = 'scorer.js'
+# about.html is available for alabaster theme. Add it at the front.
+if html_theme == 'alabaster':
+    html_sidebars['**'].insert(0, 'about.html')
 
 # Output file base name for HTML help builder.
 htmlhelp_basename = 'TheLinuxKerneldoc'
@@ -346,132 +387,25 @@ latex_elements = {
 
     # Additional stuff for the LaTeX preamble.
     'preamble': '''
-	% Prevent column squeezing of tabulary.
-	\\setlength{\\tymin}{20em}
         % Use some font with UTF-8 support with XeLaTeX
         \\usepackage{fontspec}
         \\setsansfont{DejaVu Sans}
         \\setromanfont{DejaVu Serif}
         \\setmonofont{DejaVu Sans Mono}
-     ''',
+    ''',
 }
 
-# Translations have Asian (CJK) characters which are only displayed if
-# xeCJK is used
-
-latex_elements['preamble']  += '''
-    \\IfFontExistsTF{Noto Sans CJK SC}{
-	% This is needed for translations
-	\\usepackage{xeCJK}
-	\\IfFontExistsTF{Noto Serif CJK SC}{
-	    \\setCJKmainfont{Noto Serif CJK SC}[AutoFakeSlant]
-	}{
-	    \\setCJKmainfont{Noto Sans CJK SC}[AutoFakeSlant]
-	}
-	\\setCJKsansfont{Noto Sans CJK SC}[AutoFakeSlant]
-	\\setCJKmonofont{Noto Sans Mono CJK SC}[AutoFakeSlant]
-	% CJK Language-specific font choices
-	\\IfFontExistsTF{Noto Serif CJK SC}{
-	    \\newCJKfontfamily[SCmain]\\scmain{Noto Serif CJK SC}[AutoFakeSlant]
-	    \\newCJKfontfamily[SCserif]\\scserif{Noto Serif CJK SC}[AutoFakeSlant]
-	}{
-	    \\newCJKfontfamily[SCmain]\\scmain{Noto Sans CJK SC}[AutoFakeSlant]
-	    \\newCJKfontfamily[SCserif]\\scserif{Noto Sans CJK SC}[AutoFakeSlant]
-	}
-	\\newCJKfontfamily[SCsans]\\scsans{Noto Sans CJK SC}[AutoFakeSlant]
-	\\newCJKfontfamily[SCmono]\\scmono{Noto Sans Mono CJK SC}[AutoFakeSlant]
-	\\IfFontExistsTF{Noto Serif CJK TC}{
-	    \\newCJKfontfamily[TCmain]\\tcmain{Noto Serif CJK TC}[AutoFakeSlant]
-	    \\newCJKfontfamily[TCserif]\\tcserif{Noto Serif CJK TC}[AutoFakeSlant]
-	}{
-	    \\newCJKfontfamily[TCmain]\\tcmain{Noto Sans CJK TC}[AutoFakeSlant]
-	    \\newCJKfontfamily[TCserif]\\tcserif{Noto Sans CJK TC}[AutoFakeSlant]
-	}
-	\\newCJKfontfamily[TCsans]\\tcsans{Noto Sans CJK TC}[AutoFakeSlant]
-	\\newCJKfontfamily[TCmono]\\tcmono{Noto Sans Mono CJK TC}[AutoFakeSlant]
-	\\IfFontExistsTF{Noto Serif CJK KR}{
-	    \\newCJKfontfamily[KRmain]\\krmain{Noto Serif CJK KR}[AutoFakeSlant]
-	    \\newCJKfontfamily[KRserif]\\krserif{Noto Serif CJK KR}[AutoFakeSlant]
-	}{
-	    \\newCJKfontfamily[KRmain]\\krmain{Noto Sans CJK KR}[AutoFakeSlant]
-	    \\newCJKfontfamily[KRserif]\\krserif{Noto Sans CJK KR}[AutoFakeSlant]
-	}
-	\\newCJKfontfamily[KRsans]\\krsans{Noto Sans CJK KR}[AutoFakeSlant]
-	\\newCJKfontfamily[KRmono]\\krmono{Noto Sans Mono CJK KR}[AutoFakeSlant]
-	\\IfFontExistsTF{Noto Serif CJK JP}{
-	    \\newCJKfontfamily[JPmain]\\jpmain{Noto Serif CJK JP}[AutoFakeSlant]
-	    \\newCJKfontfamily[JPserif]\\jpserif{Noto Serif CJK JP}[AutoFakeSlant]
-	}{
-	    \\newCJKfontfamily[JPmain]\\jpmain{Noto Sans CJK JP}[AutoFakeSlant]
-	    \\newCJKfontfamily[JPserif]\\jpserif{Noto Sans CJK JP}[AutoFakeSlant]
-	}
-	\\newCJKfontfamily[JPsans]\\jpsans{Noto Sans CJK JP}[AutoFakeSlant]
-	\\newCJKfontfamily[JPmono]\\jpmono{Noto Sans Mono CJK JP}[AutoFakeSlant]
-	% Dummy commands for Sphinx < 2.3 (no 'extrapackages' support)
-	\\providecommand{\\onehalfspacing}{}
-	\\providecommand{\\singlespacing}{}
-	% Define custom macros to on/off CJK
-	\\newcommand{\\kerneldocCJKon}{\\makexeCJKactive\\onehalfspacing}
-	\\newcommand{\\kerneldocCJKoff}{\\makexeCJKinactive\\singlespacing}
-	\\newcommand{\\kerneldocBeginSC}{%
-	    \\begingroup%
-	    \\scmain%
-	}
-	\\newcommand{\\kerneldocEndSC}{\\endgroup}
-	\\newcommand{\\kerneldocBeginTC}{%
-	    \\begingroup%
-	    \\tcmain%
-	    \\renewcommand{\\CJKrmdefault}{TCserif}%
-	    \\renewcommand{\\CJKsfdefault}{TCsans}%
-	    \\renewcommand{\\CJKttdefault}{TCmono}%
-	}
-	\\newcommand{\\kerneldocEndTC}{\\endgroup}
-	\\newcommand{\\kerneldocBeginKR}{%
-	    \\begingroup%
-	    \\xeCJKDeclareCharClass{HalfLeft}{`“,`‘}%
-	    \\xeCJKDeclareCharClass{HalfRight}{`”,`’}%
-	    \\krmain%
-	    \\renewcommand{\\CJKrmdefault}{KRserif}%
-	    \\renewcommand{\\CJKsfdefault}{KRsans}%
-	    \\renewcommand{\\CJKttdefault}{KRmono}%
-	    \\xeCJKsetup{CJKspace = true} % For inter-phrase space
-	}
-	\\newcommand{\\kerneldocEndKR}{\\endgroup}
-	\\newcommand{\\kerneldocBeginJP}{%
-	    \\begingroup%
-	    \\xeCJKDeclareCharClass{HalfLeft}{`“,`‘}%
-	    \\xeCJKDeclareCharClass{HalfRight}{`”,`’}%
-	    \\jpmain%
-	    \\renewcommand{\\CJKrmdefault}{JPserif}%
-	    \\renewcommand{\\CJKsfdefault}{JPsans}%
-	    \\renewcommand{\\CJKttdefault}{JPmono}%
-	}
-	\\newcommand{\\kerneldocEndJP}{\\endgroup}
-	% Single spacing in literal blocks
-	\\fvset{baselinestretch=1}
-	% To customize \\sphinxtableofcontents
-	\\usepackage{etoolbox}
-	% Inactivate CJK after tableofcontents
-	\\apptocmd{\\sphinxtableofcontents}{\\kerneldocCJKoff}{}{}
-    }{ % No CJK font found
-	% Custom macros to on/off CJK (Dummy)
-	\\newcommand{\\kerneldocCJKon}{}
-	\\newcommand{\\kerneldocCJKoff}{}
-	\\newcommand{\\kerneldocBeginSC}{}
-	\\newcommand{\\kerneldocEndSC}{}
-	\\newcommand{\\kerneldocBeginTC}{}
-	\\newcommand{\\kerneldocEndTC}{}
-	\\newcommand{\\kerneldocBeginKR}{}
-	\\newcommand{\\kerneldocEndKR}{}
-	\\newcommand{\\kerneldocBeginJP}{}
-	\\newcommand{\\kerneldocEndJP}{}
-    }
-'''
-
 # Fix reference escape troubles with Sphinx 1.4.x
 if major == 1:
     latex_elements['preamble']  += '\\renewcommand*{\\DUrole}[2]{ #2 }\n'
 
+
+# Load kerneldoc specific LaTeX settings
+latex_elements['preamble'] += '''
+        % Load kerneldoc specific LaTeX settings
+	\\input{kerneldoc-preamble.sty}
+'''
+
 # With Sphinx 1.6, it is possible to change the Bg color directly
 # by using:
 #	\definecolor{sphinxnoteBgColor}{RGB}{204,255,255}
@@ -533,6 +467,11 @@ for fn in os.listdir('.'):
 # If false, no module index is generated.
 #latex_domain_indices = True
 
+# Additional LaTeX stuff to be copied to build directory
+latex_additional_files = [
+    'sphinx/kerneldoc-preamble.sty',
+]
+
 
 # -- Options for manual page output ---------------------------------------
 
@@ -558,19 +497,6 @@ texinfo_documents = [
      'Miscellaneous'),
 ]
 
-# Documents to append as an appendix to all manuals.
-#texinfo_appendices = []
-
-# If false, no module index is generated.
-#texinfo_domain_indices = True
-
-# How to display URL addresses: 'footnote', 'no', or 'inline'.
-#texinfo_show_urls = 'footnote'
-
-# If true, do not generate a @detailmenu in the "Top" node's menu.
-#texinfo_no_detailmenu = False
-
-
 # -- Options for Epub output ----------------------------------------------
 
 # Bibliographic Dublin Core info.
@@ -579,67 +505,9 @@ epub_author = author
 epub_publisher = author
 epub_copyright = copyright
 
-# The basename for the epub file. It defaults to the project name.
-#epub_basename = project
-
-# The HTML theme for the epub output. Since the default themes are not
-# optimized for small screen space, using the same theme for HTML and epub
-# output is usually not wise. This defaults to 'epub', a theme designed to save
-# visual space.
-#epub_theme = 'epub'
-
-# The language of the text. It defaults to the language option
-# or 'en' if the language is not set.
-#epub_language = ''
-
-# The scheme of the identifier. Typical schemes are ISBN or URL.
-#epub_scheme = ''
-
-# The unique identifier of the text. This can be a ISBN number
-# or the project homepage.
-#epub_identifier = ''
-
-# A unique identification for the text.
-#epub_uid = ''
-
-# A tuple containing the cover image and cover page html template filenames.
-#epub_cover = ()
-
-# A sequence of (type, uri, title) tuples for the guide element of content.opf.
-#epub_guide = ()
-
-# HTML files that should be inserted before the pages created by sphinx.
-# The format is a list of tuples containing the path and title.
-#epub_pre_files = []
-
-# HTML files that should be inserted after the pages created by sphinx.
-# The format is a list of tuples containing the path and title.
-#epub_post_files = []
-
 # A list of files that should not be packed into the epub file.
 epub_exclude_files = ['search.html']
 
-# The depth of the table of contents in toc.ncx.
-#epub_tocdepth = 3
-
-# Allow duplicate toc entries.
-#epub_tocdup = True
-
-# Choose between 'default' and 'includehidden'.
-#epub_tocscope = 'default'
-
-# Fix unsupported image types using the Pillow.
-#epub_fix_images = False
-
-# Scale large images.
-#epub_max_image_width = 0
-
-# How to display URL addresses: 'footnote', 'no', or 'inline'.
-#epub_show_urls = 'inline'
-
-# If false, no index is generated.
-#epub_use_index = True
-
 #=======
 # rst2pdf
 #
diff --git a/Documentation/asm-annotations.rst b/Documentation/core-api/asm-annotations.rst
index 76424e0431f4..11c96d3f9ad6 100644
--- a/Documentation/asm-annotations.rst
+++ b/Documentation/core-api/asm-annotations.rst
@@ -43,10 +43,11 @@ annotated objects like this, tools can be run on them to generate more useful
 information. In particular, on properly annotated objects, ``objtool`` can be
 run to check and fix the object if needed. Currently, ``objtool`` can report
 missing frame pointer setup/destruction in functions. It can also
-automatically generate annotations for :doc:`ORC unwinder <x86/orc-unwinder>`
+automatically generate annotations for the ORC unwinder
+(Documentation/arch/x86/orc-unwinder.rst)
 for most code. Both of these are especially important to support reliable
-stack traces which are in turn necessary for :doc:`Kernel live patching
-<livepatch/livepatch>`.
+stack traces which are in turn necessary for kernel live patching
+(Documentation/livepatch/livepatch.rst).
 
 Caveat and Discussion
 ---------------------
@@ -64,7 +65,7 @@ macros, it was decided that brand new macros should be introduced instead::
     of importing all the crappy, historic, essentially randomly chosen
     debug symbol macro names from the binutils and older kernels?
 
-.. _discussion: https://lkml.kernel.org/r/20170217104757.28588-1-jslaby@suse.cz
+.. _discussion: https://lore.kernel.org/r/20170217104757.28588-1-jslaby@suse.cz
 
 Macros Description
 ------------------
@@ -130,14 +131,13 @@ denoting a range of code via ``SYM_*_START/END`` annotations.
   In fact, this kind of annotation corresponds to the now deprecated ``ENTRY``
   and ``ENDPROC`` macros.
 
-* ``SYM_FUNC_START_ALIAS`` and ``SYM_FUNC_START_LOCAL_ALIAS`` serve for those
-  who decided to have two or more names for one function. The typical use is::
+* ``SYM_FUNC_ALIAS``, ``SYM_FUNC_ALIAS_LOCAL``, and ``SYM_FUNC_ALIAS_WEAK`` can
+  be used to define multiple names for a function. The typical use is::
 
-    SYM_FUNC_START_ALIAS(__memset)
-    SYM_FUNC_START(memset)
+    SYM_FUNC_START(__memset)
         ... asm insns ...
-    SYM_FUNC_END(memset)
-    SYM_FUNC_END_ALIAS(__memset)
+    SYN_FUNC_END(__memset)
+    SYM_FUNC_ALIAS(memset, __memset)
 
   In this example, one can call ``__memset`` or ``memset`` with the same
   result, except the debug information for the instructions is generated to
diff --git a/Documentation/core-api/bus-virt-phys-mapping.rst b/Documentation/core-api/bus-virt-phys-mapping.rst
deleted file mode 100644
index c72b24a7d52c..000000000000
--- a/Documentation/core-api/bus-virt-phys-mapping.rst
+++ /dev/null
@@ -1,220 +0,0 @@
-==========================================================
-How to access I/O mapped memory from within device drivers
-==========================================================
-
-:Author: Linus
-
-.. warning::
-
-	The virt_to_bus() and bus_to_virt() functions have been
-	superseded by the functionality provided by the PCI DMA interface
-	(see Documentation/core-api/dma-api-howto.rst).  They continue
-	to be documented below for historical purposes, but new code
-	must not use them. --davidm 00/12/12
-
-::
-
-  [ This is a mail message in response to a query on IO mapping, thus the
-    strange format for a "document" ]
-
-The AHA-1542 is a bus-master device, and your patch makes the driver give the
-controller the physical address of the buffers, which is correct on x86
-(because all bus master devices see the physical memory mappings directly). 
-
-However, on many setups, there are actually **three** different ways of looking
-at memory addresses, and in this case we actually want the third, the
-so-called "bus address". 
-
-Essentially, the three ways of addressing memory are (this is "real memory",
-that is, normal RAM--see later about other details): 
-
- - CPU untranslated.  This is the "physical" address.  Physical address 
-   0 is what the CPU sees when it drives zeroes on the memory bus.
-
- - CPU translated address. This is the "virtual" address, and is 
-   completely internal to the CPU itself with the CPU doing the appropriate
-   translations into "CPU untranslated". 
-
- - bus address. This is the address of memory as seen by OTHER devices, 
-   not the CPU. Now, in theory there could be many different bus 
-   addresses, with each device seeing memory in some device-specific way, but
-   happily most hardware designers aren't actually actively trying to make
-   things any more complex than necessary, so you can assume that all 
-   external hardware sees the memory the same way. 
-
-Now, on normal PCs the bus address is exactly the same as the physical
-address, and things are very simple indeed. However, they are that simple
-because the memory and the devices share the same address space, and that is
-not generally necessarily true on other PCI/ISA setups. 
-
-Now, just as an example, on the PReP (PowerPC Reference Platform), the 
-CPU sees a memory map something like this (this is from memory)::
-
-	0-2 GB		"real memory"
-	2 GB-3 GB	"system IO" (inb/out and similar accesses on x86)
-	3 GB-4 GB 	"IO memory" (shared memory over the IO bus)
-
-Now, that looks simple enough. However, when you look at the same thing from
-the viewpoint of the devices, you have the reverse, and the physical memory
-address 0 actually shows up as address 2 GB for any IO master.
-
-So when the CPU wants any bus master to write to physical memory 0, it 
-has to give the master address 0x80000000 as the memory address.
-
-So, for example, depending on how the kernel is actually mapped on the 
-PPC, you can end up with a setup like this::
-
- physical address:	0
- virtual address:	0xC0000000
- bus address:		0x80000000
-
-where all the addresses actually point to the same thing.  It's just seen 
-through different translations..
-
-Similarly, on the Alpha, the normal translation is::
-
- physical address:	0
- virtual address:	0xfffffc0000000000
- bus address:		0x40000000
-
-(but there are also Alphas where the physical address and the bus address
-are the same). 
-
-Anyway, the way to look up all these translations, you do::
-
-	#include <asm/io.h>
-
-	phys_addr = virt_to_phys(virt_addr);
-	virt_addr = phys_to_virt(phys_addr);
-	 bus_addr = virt_to_bus(virt_addr);
-	virt_addr = bus_to_virt(bus_addr);
-
-Now, when do you need these?
-
-You want the **virtual** address when you are actually going to access that
-pointer from the kernel. So you can have something like this::
-
-	/*
-	 * this is the hardware "mailbox" we use to communicate with
-	 * the controller. The controller sees this directly.
-	 */
-	struct mailbox {
-		__u32 status;
-		__u32 bufstart;
-		__u32 buflen;
-		..
-	} mbox;
-
-		unsigned char * retbuffer;
-
-		/* get the address from the controller */
-		retbuffer = bus_to_virt(mbox.bufstart);
-		switch (retbuffer[0]) {
-			case STATUS_OK:
-				...
-
-on the other hand, you want the bus address when you have a buffer that 
-you want to give to the controller::
-
-	/* ask the controller to read the sense status into "sense_buffer" */
-	mbox.bufstart = virt_to_bus(&sense_buffer);
-	mbox.buflen = sizeof(sense_buffer);
-	mbox.status = 0;
-	notify_controller(&mbox);
-
-And you generally **never** want to use the physical address, because you can't
-use that from the CPU (the CPU only uses translated virtual addresses), and
-you can't use it from the bus master. 
-
-So why do we care about the physical address at all? We do need the physical
-address in some cases, it's just not very often in normal code.  The physical
-address is needed if you use memory mappings, for example, because the
-"remap_pfn_range()" mm function wants the physical address of the memory to
-be remapped as measured in units of pages, a.k.a. the pfn (the memory
-management layer doesn't know about devices outside the CPU, so it
-shouldn't need to know about "bus addresses" etc).
-
-.. note::
-
-	The above is only one part of the whole equation. The above
-	only talks about "real memory", that is, CPU memory (RAM).
-
-There is a completely different type of memory too, and that's the "shared
-memory" on the PCI or ISA bus. That's generally not RAM (although in the case
-of a video graphics card it can be normal DRAM that is just used for a frame
-buffer), but can be things like a packet buffer in a network card etc. 
-
-This memory is called "PCI memory" or "shared memory" or "IO memory" or
-whatever, and there is only one way to access it: the readb/writeb and
-related functions. You should never take the address of such memory, because
-there is really nothing you can do with such an address: it's not
-conceptually in the same memory space as "real memory" at all, so you cannot
-just dereference a pointer. (Sadly, on x86 it **is** in the same memory space,
-so on x86 it actually works to just deference a pointer, but it's not
-portable). 
-
-For such memory, you can do things like:
-
- - reading::
-
-	/*
-	 * read first 32 bits from ISA memory at 0xC0000, aka
-	 * C000:0000 in DOS terms
-	 */
-	unsigned int signature = isa_readl(0xC0000);
-
- - remapping and writing::
-
-	/*
-	 * remap framebuffer PCI memory area at 0xFC000000,
-	 * size 1MB, so that we can access it: We can directly
-	 * access only the 640k-1MB area, so anything else
-	 * has to be remapped.
-	 */
-	void __iomem *baseptr = ioremap(0xFC000000, 1024*1024);
-
-	/* write a 'A' to the offset 10 of the area */
-	writeb('A',baseptr+10);
-
-	/* unmap when we unload the driver */
-	iounmap(baseptr);
-
- - copying and clearing::
-
-	/* get the 6-byte Ethernet address at ISA address E000:0040 */
-	memcpy_fromio(kernel_buffer, 0xE0040, 6);
-	/* write a packet to the driver */
-	memcpy_toio(0xE1000, skb->data, skb->len);
-	/* clear the frame buffer */
-	memset_io(0xA0000, 0, 0x10000);
-
-OK, that just about covers the basics of accessing IO portably.  Questions?
-Comments? You may think that all the above is overly complex, but one day you
-might find yourself with a 500 MHz Alpha in front of you, and then you'll be
-happy that your driver works ;)
-
-Note that kernel versions 2.0.x (and earlier) mistakenly called the
-ioremap() function "vremap()".  ioremap() is the proper name, but I
-didn't think straight when I wrote it originally.  People who have to
-support both can do something like::
- 
-	/* support old naming silliness */
-	#if LINUX_VERSION_CODE < 0x020100
-	#define ioremap vremap
-	#define iounmap vfree                                                     
-	#endif
- 
-at the top of their source files, and then they can use the right names
-even on 2.0.x systems. 
-
-And the above sounds worse than it really is.  Most real drivers really
-don't do all that complex things (or rather: the complexity is not so
-much in the actual IO accesses as in error handling and timeouts etc). 
-It's generally not hard to fix drivers, and in many cases the code
-actually looks better afterwards::
-
-	unsigned long signature = *(unsigned int *) 0xC0000;
-		vs
-	unsigned long signature = readl(0xC0000);
-
-I think the second version actually is more readable, no?
diff --git a/Documentation/core-api/cachetlb.rst b/Documentation/core-api/cachetlb.rst
index 8aed9103e48a..5c0552e78c58 100644
--- a/Documentation/core-api/cachetlb.rst
+++ b/Documentation/core-api/cachetlb.rst
@@ -326,6 +326,12 @@ maps this page at its virtual address.
 			dirty.  Again, see sparc64 for examples of how
 			to deal with this.
 
+  ``void flush_dcache_folio(struct folio *folio)``
+	This function is called under the same circumstances as
+	flush_dcache_page().  It allows the architecture to
+	optimise for flushing the entire folio of pages instead
+	of flushing one page at a time.
+
   ``void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
   unsigned long user_vaddr, void *dst, void *src, int len)``
   ``void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
diff --git a/Documentation/core-api/cpu_hotplug.rst b/Documentation/core-api/cpu_hotplug.rst
index c6f4ba2fb32d..f75778d37488 100644
--- a/Documentation/core-api/cpu_hotplug.rst
+++ b/Documentation/core-api/cpu_hotplug.rst
@@ -560,7 +560,7 @@ available:
   * cpuhp_state_remove_instance(state, node)
   * cpuhp_state_remove_instance_nocalls(state, node)
 
-The arguments are the same as for the the cpuhp_state_add_instance*()
+The arguments are the same as for the cpuhp_state_add_instance*()
 variants above.
 
 The functions differ in the way how the installed callbacks are treated:
diff --git a/Documentation/core-api/dma-api-howto.rst b/Documentation/core-api/dma-api-howto.rst
index 358d495456d1..72f6cdb6be1c 100644
--- a/Documentation/core-api/dma-api-howto.rst
+++ b/Documentation/core-api/dma-api-howto.rst
@@ -185,7 +185,7 @@ device struct of your device is embedded in the bus-specific device struct of
 your device.  For example, &pdev->dev is a pointer to the device struct of a
 PCI device (pdev is a pointer to the PCI device struct of your device).
 
-These calls usually return zero to indicated your device can perform DMA
+These calls usually return zero to indicate your device can perform DMA
 properly on the machine given the address mask you provided, but they might
 return an error if the mask is too small to be supportable on the given
 system.  If it returns non-zero, your device cannot perform DMA properly on
@@ -707,20 +707,6 @@ to use the dma_sync_*() interfaces::
 		}
 	}
 
-Drivers converted fully to this interface should not use virt_to_bus() any
-longer, nor should they use bus_to_virt(). Some drivers have to be changed a
-little bit, because there is no longer an equivalent to bus_to_virt() in the
-dynamic DMA mapping scheme - you have to always store the DMA addresses
-returned by the dma_alloc_coherent(), dma_pool_alloc(), and dma_map_single()
-calls (dma_map_sg() stores them in the scatterlist itself if the platform
-supports dynamic DMA mapping in hardware) in your driver structures and/or
-in the card registers.
-
-All drivers should be using these interfaces with no exceptions.  It
-is planned to completely remove virt_to_bus() and bus_to_virt() as
-they are entirely deprecated.  Some ports already do not provide these
-as it is impossible to correctly support them.
-
 Handling Errors
 ===============
 
diff --git a/Documentation/core-api/dma-api.rst b/Documentation/core-api/dma-api.rst
index 6d6d0edd2d27..829f20a193ca 100644
--- a/Documentation/core-api/dma-api.rst
+++ b/Documentation/core-api/dma-api.rst
@@ -206,6 +206,20 @@ others should not be larger than the returned value.
 
 ::
 
+	size_t
+	dma_opt_mapping_size(struct device *dev);
+
+Returns the maximum optimal size of a mapping for the device.
+
+Mapping larger buffers may take much longer in certain scenarios. In
+addition, for high-rate short-lived streaming mappings, the upfront time
+spent on the mapping may account for an appreciable part of the total
+request lifetime. As such, if splitting larger requests incurs no
+significant performance penalty, then device drivers are advised to
+limit total DMA streaming mappings length to the returned value.
+
+::
+
 	bool
 	dma_need_sync(struct device *dev, dma_addr_t dma_addr);
 
diff --git a/Documentation/core-api/entry.rst b/Documentation/core-api/entry.rst
new file mode 100644
index 000000000000..e12f22ab33c7
--- /dev/null
+++ b/Documentation/core-api/entry.rst
@@ -0,0 +1,279 @@
+Entry/exit handling for exceptions, interrupts, syscalls and KVM
+================================================================
+
+All transitions between execution domains require state updates which are
+subject to strict ordering constraints. State updates are required for the
+following:
+
+  * Lockdep
+  * RCU / Context tracking
+  * Preemption counter
+  * Tracing
+  * Time accounting
+
+The update order depends on the transition type and is explained below in
+the transition type sections: `Syscalls`_, `KVM`_, `Interrupts and regular
+exceptions`_, `NMI and NMI-like exceptions`_.
+
+Non-instrumentable code - noinstr
+---------------------------------
+
+Most instrumentation facilities depend on RCU, so intrumentation is prohibited
+for entry code before RCU starts watching and exit code after RCU stops
+watching. In addition, many architectures must save and restore register state,
+which means that (for example) a breakpoint in the breakpoint entry code would
+overwrite the debug registers of the initial breakpoint.
+
+Such code must be marked with the 'noinstr' attribute, placing that code into a
+special section inaccessible to instrumentation and debug facilities. Some
+functions are partially instrumentable, which is handled by marking them
+noinstr and using instrumentation_begin() and instrumentation_end() to flag the
+instrumentable ranges of code:
+
+.. code-block:: c
+
+  noinstr void entry(void)
+  {
+  	handle_entry();     // <-- must be 'noinstr' or '__always_inline'
+	...
+
+	instrumentation_begin();
+	handle_context();   // <-- instrumentable code
+	instrumentation_end();
+
+	...
+	handle_exit();      // <-- must be 'noinstr' or '__always_inline'
+  }
+
+This allows verification of the 'noinstr' restrictions via objtool on
+supported architectures.
+
+Invoking non-instrumentable functions from instrumentable context has no
+restrictions and is useful to protect e.g. state switching which would
+cause malfunction if instrumented.
+
+All non-instrumentable entry/exit code sections before and after the RCU
+state transitions must run with interrupts disabled.
+
+Syscalls
+--------
+
+Syscall-entry code starts in assembly code and calls out into low-level C code
+after establishing low-level architecture-specific state and stack frames. This
+low-level C code must not be instrumented. A typical syscall handling function
+invoked from low-level assembly code looks like this:
+
+.. code-block:: c
+
+  noinstr void syscall(struct pt_regs *regs, int nr)
+  {
+	arch_syscall_enter(regs);
+	nr = syscall_enter_from_user_mode(regs, nr);
+
+	instrumentation_begin();
+	if (!invoke_syscall(regs, nr) && nr != -1)
+	 	result_reg(regs) = __sys_ni_syscall(regs);
+	instrumentation_end();
+
+	syscall_exit_to_user_mode(regs);
+  }
+
+syscall_enter_from_user_mode() first invokes enter_from_user_mode() which
+establishes state in the following order:
+
+  * Lockdep
+  * RCU / Context tracking
+  * Tracing
+
+and then invokes the various entry work functions like ptrace, seccomp, audit,
+syscall tracing, etc. After all that is done, the instrumentable invoke_syscall
+function can be invoked. The instrumentable code section then ends, after which
+syscall_exit_to_user_mode() is invoked.
+
+syscall_exit_to_user_mode() handles all work which needs to be done before
+returning to user space like tracing, audit, signals, task work etc. After
+that it invokes exit_to_user_mode() which again handles the state
+transition in the reverse order:
+
+  * Tracing
+  * RCU / Context tracking
+  * Lockdep
+
+syscall_enter_from_user_mode() and syscall_exit_to_user_mode() are also
+available as fine grained subfunctions in cases where the architecture code
+has to do extra work between the various steps. In such cases it has to
+ensure that enter_from_user_mode() is called first on entry and
+exit_to_user_mode() is called last on exit.
+
+Do not nest syscalls. Nested systcalls will cause RCU and/or context tracking
+to print a warning.
+
+KVM
+---
+
+Entering or exiting guest mode is very similar to syscalls. From the host
+kernel point of view the CPU goes off into user space when entering the
+guest and returns to the kernel on exit.
+
+kvm_guest_enter_irqoff() is a KVM-specific variant of exit_to_user_mode()
+and kvm_guest_exit_irqoff() is the KVM variant of enter_from_user_mode().
+The state operations have the same ordering.
+
+Task work handling is done separately for guest at the boundary of the
+vcpu_run() loop via xfer_to_guest_mode_handle_work() which is a subset of
+the work handled on return to user space.
+
+Do not nest KVM entry/exit transitions because doing so is nonsensical.
+
+Interrupts and regular exceptions
+---------------------------------
+
+Interrupts entry and exit handling is slightly more complex than syscalls
+and KVM transitions.
+
+If an interrupt is raised while the CPU executes in user space, the entry
+and exit handling is exactly the same as for syscalls.
+
+If the interrupt is raised while the CPU executes in kernel space the entry and
+exit handling is slightly different. RCU state is only updated when the
+interrupt is raised in the context of the CPU's idle task. Otherwise, RCU will
+already be watching. Lockdep and tracing have to be updated unconditionally.
+
+irqentry_enter() and irqentry_exit() provide the implementation for this.
+
+The architecture-specific part looks similar to syscall handling:
+
+.. code-block:: c
+
+  noinstr void interrupt(struct pt_regs *regs, int nr)
+  {
+	arch_interrupt_enter(regs);
+	state = irqentry_enter(regs);
+
+	instrumentation_begin();
+
+	irq_enter_rcu();
+	invoke_irq_handler(regs, nr);
+	irq_exit_rcu();
+
+	instrumentation_end();
+
+	irqentry_exit(regs, state);
+  }
+
+Note that the invocation of the actual interrupt handler is within a
+irq_enter_rcu() and irq_exit_rcu() pair.
+
+irq_enter_rcu() updates the preemption count which makes in_hardirq()
+return true, handles NOHZ tick state and interrupt time accounting. This
+means that up to the point where irq_enter_rcu() is invoked in_hardirq()
+returns false.
+
+irq_exit_rcu() handles interrupt time accounting, undoes the preemption
+count update and eventually handles soft interrupts and NOHZ tick state.
+
+In theory, the preemption count could be updated in irqentry_enter(). In
+practice, deferring this update to irq_enter_rcu() allows the preemption-count
+code to be traced, while also maintaining symmetry with irq_exit_rcu() and
+irqentry_exit(), which are described in the next paragraph. The only downside
+is that the early entry code up to irq_enter_rcu() must be aware that the
+preemption count has not yet been updated with the HARDIRQ_OFFSET state.
+
+Note that irq_exit_rcu() must remove HARDIRQ_OFFSET from the preemption count
+before it handles soft interrupts, whose handlers must run in BH context rather
+than irq-disabled context. In addition, irqentry_exit() might schedule, which
+also requires that HARDIRQ_OFFSET has been removed from the preemption count.
+
+Even though interrupt handlers are expected to run with local interrupts
+disabled, interrupt nesting is common from an entry/exit perspective. For
+example, softirq handling happens within an irqentry_{enter,exit}() block with
+local interrupts enabled. Also, although uncommon, nothing prevents an
+interrupt handler from re-enabling interrupts.
+
+Interrupt entry/exit code doesn't strictly need to handle reentrancy, since it
+runs with local interrupts disabled. But NMIs can happen anytime, and a lot of
+the entry code is shared between the two.
+
+NMI and NMI-like exceptions
+---------------------------
+
+NMIs and NMI-like exceptions (machine checks, double faults, debug
+interrupts, etc.) can hit any context and must be extra careful with
+the state.
+
+State changes for debug exceptions and machine-check exceptions depend on
+whether these exceptions happened in user-space (breakpoints or watchpoints) or
+in kernel mode (code patching). From user-space, they are treated like
+interrupts, while from kernel mode they are treated like NMIs.
+
+NMIs and other NMI-like exceptions handle state transitions without
+distinguishing between user-mode and kernel-mode origin.
+
+The state update on entry is handled in irqentry_nmi_enter() which updates
+state in the following order:
+
+  * Preemption counter
+  * Lockdep
+  * RCU / Context tracking
+  * Tracing
+
+The exit counterpart irqentry_nmi_exit() does the reverse operation in the
+reverse order.
+
+Note that the update of the preemption counter has to be the first
+operation on enter and the last operation on exit. The reason is that both
+lockdep and RCU rely on in_nmi() returning true in this case. The
+preemption count modification in the NMI entry/exit case must not be
+traced.
+
+Architecture-specific code looks like this:
+
+.. code-block:: c
+
+  noinstr void nmi(struct pt_regs *regs)
+  {
+	arch_nmi_enter(regs);
+	state = irqentry_nmi_enter(regs);
+
+	instrumentation_begin();
+	nmi_handler(regs);
+	instrumentation_end();
+
+	irqentry_nmi_exit(regs);
+  }
+
+and for e.g. a debug exception it can look like this:
+
+.. code-block:: c
+
+  noinstr void debug(struct pt_regs *regs)
+  {
+	arch_nmi_enter(regs);
+
+	debug_regs = save_debug_regs();
+
+	if (user_mode(regs)) {
+		state = irqentry_enter(regs);
+
+		instrumentation_begin();
+		user_mode_debug_handler(regs, debug_regs);
+		instrumentation_end();
+
+		irqentry_exit(regs, state);
+  	} else {
+  		state = irqentry_nmi_enter(regs);
+
+		instrumentation_begin();
+		kernel_mode_debug_handler(regs, debug_regs);
+		instrumentation_end();
+
+		irqentry_nmi_exit(regs, state);
+	}
+  }
+
+There is no combined irqentry_nmi_if_kernel() function available as the
+above cannot be handled in an exception-agnostic way.
+
+NMIs can happen in any context. For example, an NMI-like exception triggered
+while handling an NMI. So NMI entry code has to be reentrant and state updates
+need to handle nesting.
diff --git a/Documentation/core-api/idr.rst b/Documentation/core-api/idr.rst
index 2eb5afdb9931..18d724867064 100644
--- a/Documentation/core-api/idr.rst
+++ b/Documentation/core-api/idr.rst
@@ -17,6 +17,9 @@ solution to the problem to avoid everybody inventing their own.  The IDR
 provides the ability to map an ID to a pointer, while the IDA provides
 only ID allocation, and as a result is much more memory-efficient.
 
+The IDR interface is deprecated; please use the :doc:`XArray <xarray>`
+instead.
+
 IDR usage
 =========
 
diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index 5de2c7a4b1b3..7a3a08d81f11 100644
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -18,9 +18,12 @@ it.
 
    kernel-api
    workqueue
+   watch_queue
    printk-basics
    printk-formats
+   printk-index
    symbol-namespaces
+   asm-annotations
 
 Data structures and low-level utilities
 =======================================
@@ -34,15 +37,25 @@ Library functionality that is used throughout the kernel.
    kref
    assoc_array
    xarray
+   maple_tree
    idr
    circular-buffers
    rbtree
    generic-radix-tree
    packing
-   bus-virt-phys-mapping
    this_cpu_ops
    timekeeping
    errseq
+   wrappers/atomic_t
+   wrappers/atomic_bitops
+
+Low level entry and exit
+========================
+
+.. toctree::
+   :maxdepth: 1
+
+   entry
 
 Concurrency primitives
 ======================
@@ -58,6 +71,7 @@ Documentation/locking/index.rst for more related documentation.
    local_ops
    padata
    ../RCU/index
+   wrappers/memory-barriers.rst
 
 Low-level hardware management
 =============================
@@ -77,7 +91,7 @@ Memory management
 =================
 
 How to allocate and use memory in the kernel.  Note that there is a lot
-more memory-management documentation in Documentation/vm/index.rst.
+more memory-management documentation in Documentation/mm/index.rst.
 
 .. toctree::
    :maxdepth: 1
@@ -113,6 +127,7 @@ Documents that don't fit elsewhere or which have yet to be categorized.
    :maxdepth: 1
 
    librs
+   netlink
 
 .. only:: subproject and html
 
diff --git a/Documentation/core-api/irq/irq-domain.rst b/Documentation/core-api/irq/irq-domain.rst
index 9c0e8758037a..f88a6ee67a35 100644
--- a/Documentation/core-api/irq/irq-domain.rst
+++ b/Documentation/core-api/irq/irq-domain.rst
@@ -67,14 +67,11 @@ variety of methods:
   deprecated
 - generic_handle_domain_irq() handles an interrupt described by a
   domain and a hwirq number
-- handle_domain_irq() does the same thing for root interrupt
-  controllers and deals with the set_irq_reg()/irq_enter() sequences
-  that most architecture requires
 
 Note that irq domain lookups must happen in contexts that are
 compatible with a RCU read-side critical section.
 
-The irq_create_mapping() function must be called *atleast once*
+The irq_create_mapping() function must be called *at least once*
 before any call to irq_find_mapping(), lest the descriptor will not
 be allocated.
 
diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst
index 2e7186805148..9b3f3e5f5a95 100644
--- a/Documentation/core-api/kernel-api.rst
+++ b/Documentation/core-api/kernel-api.rst
@@ -36,6 +36,9 @@ String Conversions
 String Manipulation
 -------------------
 
+.. kernel-doc:: include/linux/fortify-string.h
+   :internal:
+
 .. kernel-doc:: lib/string.c
    :export:
 
@@ -118,6 +121,12 @@ Text Searching
 CRC and Math Functions in Linux
 ===============================
 
+Arithmetic Overflow Checking
+----------------------------
+
+.. kernel-doc:: include/linux/overflow.h
+   :internal:
+
 CRC Functions
 -------------
 
@@ -165,9 +174,6 @@ Division Functions
 .. kernel-doc:: include/linux/math64.h
    :internal:
 
-.. kernel-doc:: lib/math/div64.c
-   :functions: div_s64_rem div64_u64_rem div64_u64 div64_s64
-
 .. kernel-doc:: lib/math/gcd.c
    :export:
 
@@ -214,16 +220,34 @@ relay interface
 Module Support
 ==============
 
-Module Loading
---------------
+Kernel module auto-loading
+--------------------------
 
-.. kernel-doc:: kernel/kmod.c
+.. kernel-doc:: kernel/module/kmod.c
    :export:
 
+Module debugging
+----------------
+
+.. kernel-doc:: kernel/module/stats.c
+   :doc: module debugging statistics overview
+
+dup_failed_modules - tracks duplicate failed modules
+****************************************************
+
+.. kernel-doc:: kernel/module/stats.c
+   :doc: dup_failed_modules - tracks duplicate failed modules
+
+module statistics debugfs counters
+**********************************
+
+.. kernel-doc:: kernel/module/stats.c
+   :doc: module statistics debugfs counters
+
 Inter Module support
 --------------------
 
-Refer to the file kernel/module.c for more information.
+Refer to the files in kernel/module/ for more information.
 
 Hardware Interfaces
 ===================
@@ -279,6 +303,7 @@ Accounting Framework
 Block Devices
 =============
 
+.. kernel-doc:: include/linux/bio.h
 .. kernel-doc:: block/blk-core.c
    :export:
 
@@ -294,9 +319,6 @@ Block Devices
 .. kernel-doc:: block/blk-settings.c
    :export:
 
-.. kernel-doc:: block/blk-exec.c
-   :export:
-
 .. kernel-doc:: block/blk-flush.c
    :export:
 
diff --git a/Documentation/core-api/kobject.rst b/Documentation/core-api/kobject.rst
index 2739f8b72575..7310247310a0 100644
--- a/Documentation/core-api/kobject.rst
+++ b/Documentation/core-api/kobject.rst
@@ -118,7 +118,7 @@ Initialization of kobjects
 Code which creates a kobject must, of course, initialize that object. Some
 of the internal fields are setup with a (mandatory) call to kobject_init()::
 
-    void kobject_init(struct kobject *kobj, struct kobj_type *ktype);
+    void kobject_init(struct kobject *kobj, const struct kobj_type *ktype);
 
 The ktype is required for a kobject to be created properly, as every kobject
 must have an associated kobj_type.  After calling kobject_init(), to
@@ -156,7 +156,7 @@ kobject_name()::
 There is a helper function to both initialize and add the kobject to the
 kernel at the same time, called surprisingly enough kobject_init_and_add()::
 
-    int kobject_init_and_add(struct kobject *kobj, struct kobj_type *ktype,
+    int kobject_init_and_add(struct kobject *kobj, const struct kobj_type *ktype,
                              struct kobject *parent, const char *fmt, ...);
 
 The arguments are the same as the individual kobject_init() and
@@ -299,7 +299,6 @@ kobj_type::
     struct kobj_type {
             void (*release)(struct kobject *kobj);
             const struct sysfs_ops *sysfs_ops;
-            struct attribute **default_attrs;
             const struct attribute_group **default_groups;
             const struct kobj_ns_type_operations *(*child_ns_type)(struct kobject *kobj);
             const void *(*namespace)(struct kobject *kobj);
@@ -313,10 +312,10 @@ call kobject_init() or kobject_init_and_add().
 
 The release field in struct kobj_type is, of course, a pointer to the
 release() method for this type of kobject. The other two fields (sysfs_ops
-and default_attrs) control how objects of this type are represented in
+and default_groups) control how objects of this type are represented in
 sysfs; they are beyond the scope of this document.
 
-The default_attrs pointer is a list of default attributes that will be
+The default_groups pointer is a list of default attributes that will be
 automatically created for any kobject that is registered with this ktype.
 
 
@@ -373,10 +372,9 @@ If a kset wishes to control the uevent operations of the kobjects
 associated with it, it can use the struct kset_uevent_ops to handle it::
 
   struct kset_uevent_ops {
-          int (* const filter)(struct kset *kset, struct kobject *kobj);
-          const char *(* const name)(struct kset *kset, struct kobject *kobj);
-          int (* const uevent)(struct kset *kset, struct kobject *kobj,
-                        struct kobj_uevent_env *env);
+          int (* const filter)(struct kobject *kobj);
+          const char *(* const name)(struct kobject *kobj);
+          int (* const uevent)(struct kobject *kobj, struct kobj_uevent_env *env);
   };
 
 
diff --git a/Documentation/core-api/local_ops.rst b/Documentation/core-api/local_ops.rst
index 2ac3f9f29845..0b42ceaaf3c4 100644
--- a/Documentation/core-api/local_ops.rst
+++ b/Documentation/core-api/local_ops.rst
@@ -191,7 +191,7 @@ Here is a sample module which implements a basic per cpu counter using
 
     static void __exit test_exit(void)
     {
-            del_timer_sync(&test_timer);
+            timer_shutdown_sync(&test_timer);
     }
 
     module_init(test_init);
diff --git a/Documentation/core-api/maple_tree.rst b/Documentation/core-api/maple_tree.rst
new file mode 100644
index 000000000000..45defcf15da7
--- /dev/null
+++ b/Documentation/core-api/maple_tree.rst
@@ -0,0 +1,217 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+
+==========
+Maple Tree
+==========
+
+:Author: Liam R. Howlett
+
+Overview
+========
+
+The Maple Tree is a B-Tree data type which is optimized for storing
+non-overlapping ranges, including ranges of size 1.  The tree was designed to
+be simple to use and does not require a user written search method.  It
+supports iterating over a range of entries and going to the previous or next
+entry in a cache-efficient manner.  The tree can also be put into an RCU-safe
+mode of operation which allows reading and writing concurrently.  Writers must
+synchronize on a lock, which can be the default spinlock, or the user can set
+the lock to an external lock of a different type.
+
+The Maple Tree maintains a small memory footprint and was designed to use
+modern processor cache efficiently.  The majority of the users will be able to
+use the normal API.  An :ref:`maple-tree-advanced-api` exists for more complex
+scenarios.  The most important usage of the Maple Tree is the tracking of the
+virtual memory areas.
+
+The Maple Tree can store values between ``0`` and ``ULONG_MAX``.  The Maple
+Tree reserves values with the bottom two bits set to '10' which are below 4096
+(ie 2, 6, 10 .. 4094) for internal use.  If the entries may use reserved
+entries then the users can convert the entries using xa_mk_value() and convert
+them back by calling xa_to_value().  If the user needs to use a reserved
+value, then the user can convert the value when using the
+:ref:`maple-tree-advanced-api`, but are blocked by the normal API.
+
+The Maple Tree can also be configured to support searching for a gap of a given
+size (or larger).
+
+Pre-allocating of nodes is also supported using the
+:ref:`maple-tree-advanced-api`.  This is useful for users who must guarantee a
+successful store operation within a given
+code segment when allocating cannot be done.  Allocations of nodes are
+relatively small at around 256 bytes.
+
+.. _maple-tree-normal-api:
+
+Normal API
+==========
+
+Start by initialising a maple tree, either with DEFINE_MTREE() for statically
+allocated maple trees or mt_init() for dynamically allocated ones.  A
+freshly-initialised maple tree contains a ``NULL`` pointer for the range ``0``
+- ``ULONG_MAX``.  There are currently two types of maple trees supported: the
+allocation tree and the regular tree.  The regular tree has a higher branching
+factor for internal nodes.  The allocation tree has a lower branching factor
+but allows the user to search for a gap of a given size or larger from either
+``0`` upwards or ``ULONG_MAX`` down.  An allocation tree can be used by
+passing in the ``MT_FLAGS_ALLOC_RANGE`` flag when initialising the tree.
+
+You can then set entries using mtree_store() or mtree_store_range().
+mtree_store() will overwrite any entry with the new entry and return 0 on
+success or an error code otherwise.  mtree_store_range() works in the same way
+but takes a range.  mtree_load() is used to retrieve the entry stored at a
+given index.  You can use mtree_erase() to erase an entire range by only
+knowing one value within that range, or mtree_store() call with an entry of
+NULL may be used to partially erase a range or many ranges at once.
+
+If you want to only store a new entry to a range (or index) if that range is
+currently ``NULL``, you can use mtree_insert_range() or mtree_insert() which
+return -EEXIST if the range is not empty.
+
+You can search for an entry from an index upwards by using mt_find().
+
+You can walk each entry within a range by calling mt_for_each().  You must
+provide a temporary variable to store a cursor.  If you want to walk each
+element of the tree then ``0`` and ``ULONG_MAX`` may be used as the range.  If
+the caller is going to hold the lock for the duration of the walk then it is
+worth looking at the mas_for_each() API in the :ref:`maple-tree-advanced-api`
+section.
+
+Sometimes it is necessary to ensure the next call to store to a maple tree does
+not allocate memory, please see :ref:`maple-tree-advanced-api` for this use case.
+
+Finally, you can remove all entries from a maple tree by calling
+mtree_destroy().  If the maple tree entries are pointers, you may wish to free
+the entries first.
+
+Allocating Nodes
+----------------
+
+The allocations are handled by the internal tree code.  See
+:ref:`maple-tree-advanced-alloc` for other options.
+
+Locking
+-------
+
+You do not have to worry about locking.  See :ref:`maple-tree-advanced-locks`
+for other options.
+
+The Maple Tree uses RCU and an internal spinlock to synchronise access:
+
+Takes RCU read lock:
+ * mtree_load()
+ * mt_find()
+ * mt_for_each()
+ * mt_next()
+ * mt_prev()
+
+Takes ma_lock internally:
+ * mtree_store()
+ * mtree_store_range()
+ * mtree_insert()
+ * mtree_insert_range()
+ * mtree_erase()
+ * mtree_destroy()
+ * mt_set_in_rcu()
+ * mt_clear_in_rcu()
+
+If you want to take advantage of the internal lock to protect the data
+structures that you are storing in the Maple Tree, you can call mtree_lock()
+before calling mtree_load(), then take a reference count on the object you
+have found before calling mtree_unlock().  This will prevent stores from
+removing the object from the tree between looking up the object and
+incrementing the refcount.  You can also use RCU to avoid dereferencing
+freed memory, but an explanation of that is beyond the scope of this
+document.
+
+.. _maple-tree-advanced-api:
+
+Advanced API
+============
+
+The advanced API offers more flexibility and better performance at the
+cost of an interface which can be harder to use and has fewer safeguards.
+You must take care of your own locking while using the advanced API.
+You can use the ma_lock, RCU or an external lock for protection.
+You can mix advanced and normal operations on the same array, as long
+as the locking is compatible.  The :ref:`maple-tree-normal-api` is implemented
+in terms of the advanced API.
+
+The advanced API is based around the ma_state, this is where the 'mas'
+prefix originates.  The ma_state struct keeps track of tree operations to make
+life easier for both internal and external tree users.
+
+Initialising the maple tree is the same as in the :ref:`maple-tree-normal-api`.
+Please see above.
+
+The maple state keeps track of the range start and end in mas->index and
+mas->last, respectively.
+
+mas_walk() will walk the tree to the location of mas->index and set the
+mas->index and mas->last according to the range for the entry.
+
+You can set entries using mas_store().  mas_store() will overwrite any entry
+with the new entry and return the first existing entry that is overwritten.
+The range is passed in as members of the maple state: index and last.
+
+You can use mas_erase() to erase an entire range by setting index and
+last of the maple state to the desired range to erase.  This will erase
+the first range that is found in that range, set the maple state index
+and last as the range that was erased and return the entry that existed
+at that location.
+
+You can walk each entry within a range by using mas_for_each().  If you want
+to walk each element of the tree then ``0`` and ``ULONG_MAX`` may be used as
+the range.  If the lock needs to be periodically dropped, see the locking
+section mas_pause().
+
+Using a maple state allows mas_next() and mas_prev() to function as if the
+tree was a linked list.  With such a high branching factor the amortized
+performance penalty is outweighed by cache optimization.  mas_next() will
+return the next entry which occurs after the entry at index.  mas_prev()
+will return the previous entry which occurs before the entry at index.
+
+mas_find() will find the first entry which exists at or above index on
+the first call, and the next entry from every subsequent calls.
+
+mas_find_rev() will find the fist entry which exists at or below the last on
+the first call, and the previous entry from every subsequent calls.
+
+If the user needs to yield the lock during an operation, then the maple state
+must be paused using mas_pause().
+
+There are a few extra interfaces provided when using an allocation tree.
+If you wish to search for a gap within a range, then mas_empty_area()
+or mas_empty_area_rev() can be used.  mas_empty_area() searches for a gap
+starting at the lowest index given up to the maximum of the range.
+mas_empty_area_rev() searches for a gap starting at the highest index given
+and continues downward to the lower bound of the range.
+
+.. _maple-tree-advanced-alloc:
+
+Advanced Allocating Nodes
+-------------------------
+
+Allocations are usually handled internally to the tree, however if allocations
+need to occur before a write occurs then calling mas_expected_entries() will
+allocate the worst-case number of needed nodes to insert the provided number of
+ranges.  This also causes the tree to enter mass insertion mode.  Once
+insertions are complete calling mas_destroy() on the maple state will free the
+unused allocations.
+
+.. _maple-tree-advanced-locks:
+
+Advanced Locking
+----------------
+
+The maple tree uses a spinlock by default, but external locks can be used for
+tree updates as well.  To use an external lock, the tree must be initialized
+with the ``MT_FLAGS_LOCK_EXTERN flag``, this is usually done with the
+MTREE_INIT_EXT() #define, which takes an external lock as an argument.
+
+Functions and structures
+========================
+
+.. kernel-doc:: include/linux/maple_tree.h
+.. kernel-doc:: lib/maple_tree.c
diff --git a/Documentation/core-api/memory-allocation.rst b/Documentation/core-api/memory-allocation.rst
index 5954ddf6ee13..1c58d883b273 100644
--- a/Documentation/core-api/memory-allocation.rst
+++ b/Documentation/core-api/memory-allocation.rst
@@ -170,7 +170,16 @@ should be used if a part of the cache might be copied to the userspace.
 After the cache is created kmem_cache_alloc() and its convenience
 wrappers can allocate memory from that cache.
 
-When the allocated memory is no longer needed it must be freed. You can
-use kvfree() for the memory allocated with `kmalloc`, `vmalloc` and
-`kvmalloc`. The slab caches should be freed with kmem_cache_free(). And
-don't forget to destroy the cache with kmem_cache_destroy().
+When the allocated memory is no longer needed it must be freed.
+
+Objects allocated by `kmalloc` can be freed by `kfree` or `kvfree`. Objects
+allocated by `kmem_cache_alloc` can be freed with `kmem_cache_free`, `kfree`
+or `kvfree`, where the latter two might be more convenient thanks to not
+needing the kmem_cache pointer.
+
+The same rules apply to _bulk and _rcu flavors of freeing functions.
+
+Memory allocated by `vmalloc` can be freed with `vfree` or `kvfree`.
+Memory allocated by `kvmalloc` can be freed with `kvfree`.
+Caches created by `kmem_cache_create` should be freed with
+`kmem_cache_destroy` only after freeing all the allocated objects first.
diff --git a/Documentation/core-api/mm-api.rst b/Documentation/core-api/mm-api.rst
index a42f9baddfbf..f5dde5bceaea 100644
--- a/Documentation/core-api/mm-api.rst
+++ b/Documentation/core-api/mm-api.rst
@@ -19,19 +19,16 @@ User Space Memory Access
 Memory Allocation Controls
 ==========================
 
-.. kernel-doc:: include/linux/gfp.h
-   :internal:
-
-.. kernel-doc:: include/linux/gfp.h
+.. kernel-doc:: include/linux/gfp_types.h
    :doc: Page mobility and placement hints
 
-.. kernel-doc:: include/linux/gfp.h
+.. kernel-doc:: include/linux/gfp_types.h
    :doc: Watermark modifiers
 
-.. kernel-doc:: include/linux/gfp.h
+.. kernel-doc:: include/linux/gfp_types.h
    :doc: Reclaim modifiers
 
-.. kernel-doc:: include/linux/gfp.h
+.. kernel-doc:: include/linux/gfp_types.h
    :doc: Useful GFP flag combinations
 
 The Slab Cache
@@ -58,15 +55,30 @@ Virtually Contiguous Mappings
 File Mapping and Page Cache
 ===========================
 
-.. kernel-doc:: mm/readahead.c
-   :export:
+Filemap
+-------
 
 .. kernel-doc:: mm/filemap.c
    :export:
 
+Readahead
+---------
+
+.. kernel-doc:: mm/readahead.c
+   :doc: Readahead Overview
+
+.. kernel-doc:: mm/readahead.c
+   :export:
+
+Writeback
+---------
+
 .. kernel-doc:: mm/page-writeback.c
    :export:
 
+Truncate
+--------
+
 .. kernel-doc:: mm/truncate.c
    :export:
 
@@ -95,6 +107,11 @@ More Memory Management Functions
 .. kernel-doc:: mm/mempolicy.c
 .. kernel-doc:: include/linux/mm_types.h
    :internal:
+.. kernel-doc:: include/linux/mm_inline.h
+.. kernel-doc:: include/linux/page-flags.h
 .. kernel-doc:: include/linux/mm.h
    :internal:
+.. kernel-doc:: include/linux/page_ref.h
 .. kernel-doc:: include/linux/mmzone.h
+.. kernel-doc:: mm/util.c
+   :functions: folio_mapping
diff --git a/Documentation/core-api/netlink.rst b/Documentation/core-api/netlink.rst
new file mode 100644
index 000000000000..e4a938a05cc9
--- /dev/null
+++ b/Documentation/core-api/netlink.rst
@@ -0,0 +1,101 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+
+.. _kernel_netlink:
+
+===================================
+Netlink notes for kernel developers
+===================================
+
+General guidance
+================
+
+Attribute enums
+---------------
+
+Older families often define "null" attributes and commands with value
+of ``0`` and named ``unspec``. This is supported (``type: unused``)
+but should be avoided in new families. The ``unspec`` enum values are
+not used in practice, so just set the value of the first attribute to ``1``.
+
+Message enums
+-------------
+
+Use the same command IDs for requests and replies. This makes it easier
+to match them up, and we have plenty of ID space.
+
+Use separate command IDs for notifications. This makes it easier to
+sort the notifications from replies (and present them to the user
+application via a different API than replies).
+
+Answer requests
+---------------
+
+Older families do not reply to all of the commands, especially NEW / ADD
+commands. User only gets information whether the operation succeeded or
+not via the ACK. Try to find useful data to return. Once the command is
+added whether it replies with a full message or only an ACK is uAPI and
+cannot be changed. It's better to err on the side of replying.
+
+Specifically NEW and ADD commands should reply with information identifying
+the created object such as the allocated object's ID (without having to
+resort to using ``NLM_F_ECHO``).
+
+NLM_F_ECHO
+----------
+
+Make sure to pass the request info to genl_notify() to allow ``NLM_F_ECHO``
+to take effect.  This is useful for programs that need precise feedback
+from the kernel (for example for logging purposes).
+
+Support dump consistency
+------------------------
+
+If iterating over objects during dump may skip over objects or repeat
+them - make sure to report dump inconsistency with ``NLM_F_DUMP_INTR``.
+This is usually implemented by maintaining a generation id for the
+structure and recording it in the ``seq`` member of struct netlink_callback.
+
+Netlink specification
+=====================
+
+Documentation of the Netlink specification parts which are only relevant
+to the kernel space.
+
+Globals
+-------
+
+kernel-policy
+~~~~~~~~~~~~~
+
+Defines if the kernel validation policy is per operation (``per-op``)
+or for the entire family (``global``). New families should use ``per-op``
+(default) to be able to narrow down the attributes accepted by a specific
+command.
+
+checks
+------
+
+Documentation for the ``checks`` sub-sections of attribute specs.
+
+unterminated-ok
+~~~~~~~~~~~~~~~
+
+Accept strings without the null-termination (for legacy families only).
+Switches from the ``NLA_NUL_STRING`` to ``NLA_STRING`` policy type.
+
+max-len
+~~~~~~~
+
+Defines max length for a binary or string attribute (corresponding
+to the ``len`` member of struct nla_policy). For string attributes terminating
+null character is not counted towards ``max-len``.
+
+The field may either be a literal integer value or a name of a defined
+constant. String types may reduce the constant by one
+(i.e. specify ``max-len: CONST - 1``) to reserve space for the terminating
+character so implementations should recognize such pattern.
+
+min-len
+~~~~~~~
+
+Similar to ``max-len`` but defines minimum length.
diff --git a/Documentation/core-api/packing.rst b/Documentation/core-api/packing.rst
index d8c341fe383e..3ed13bc9a195 100644
--- a/Documentation/core-api/packing.rst
+++ b/Documentation/core-api/packing.rst
@@ -161,6 +161,6 @@ xxx_packing() that calls it using the proper QUIRK_* one-hot bits set.
 
 The packing() function returns an int-encoded error code, which protects the
 programmer against incorrect API use.  The errors are not expected to occur
-durring runtime, therefore it is reasonable for xxx_packing() to return void
+during runtime, therefore it is reasonable for xxx_packing() to return void
 and simply swallow those errors. Optionally it can dump stack or print the
 error description.
diff --git a/Documentation/core-api/padata.rst b/Documentation/core-api/padata.rst
index 35175710b43c..05b73c6c105f 100644
--- a/Documentation/core-api/padata.rst
+++ b/Documentation/core-api/padata.rst
@@ -42,7 +42,7 @@ padata_shells associated with it, each allowing a separate series of jobs.
 Modifying cpumasks
 ------------------
 
-The CPUs used to run jobs can be changed in two ways, programatically with
+The CPUs used to run jobs can be changed in two ways, programmatically with
 padata_set_cpumask() or via sysfs.  The former is defined::
 
     int padata_set_cpumask(struct padata_instance *pinst, int cpumask_type,
diff --git a/Documentation/core-api/pin_user_pages.rst b/Documentation/core-api/pin_user_pages.rst
index fcf605be43d0..9fb0b1080d3b 100644
--- a/Documentation/core-api/pin_user_pages.rst
+++ b/Documentation/core-api/pin_user_pages.rst
@@ -55,18 +55,17 @@ flags the caller provides. The caller is required to pass in a non-null struct
 pages* array, and the function then pins pages by incrementing each by a special
 value: GUP_PIN_COUNTING_BIAS.
 
-For huge pages (and in fact, any compound page of more than 2 pages), the
-GUP_PIN_COUNTING_BIAS scheme is not used. Instead, an exact form of pin counting
-is achieved, by using the 3rd struct page in the compound page. A new struct
-page field, hpage_pinned_refcount, has been added in order to support this.
-
-This approach for compound pages avoids the counting upper limit problems that
-are discussed below. Those limitations would have been aggravated severely by
-huge pages, because each tail page adds a refcount to the head page. And in
-fact, testing revealed that, without a separate hpage_pinned_refcount field,
-page overflows were seen in some huge page stress tests.
-
-This also means that huge pages and compound pages (of order > 1) do not suffer
+For large folios, the GUP_PIN_COUNTING_BIAS scheme is not used. Instead,
+the extra space available in the struct folio is used to store the
+pincount directly.
+
+This approach for large folios avoids the counting upper limit problems
+that are discussed below. Those limitations would have been aggravated
+severely by huge pages, because each tail page adds a refcount to the
+head page. And in fact, testing revealed that, without a separate pincount
+field, refcount overflows were seen in some huge page stress tests.
+
+This also means that huge pages and large folios do not suffer
 from the false positives problem that is mentioned below.::
 
  Function
@@ -221,7 +220,7 @@ Unit testing
 ============
 This file::
 
- tools/testing/selftests/vm/gup_test.c
+ tools/testing/selftests/mm/gup_test.c
 
 has the following new calls to exercise the new pin*() wrapper functions:
 
@@ -264,9 +263,9 @@ place.)
 Other diagnostics
 =================
 
-dump_page() has been enhanced slightly, to handle these new counting fields, and
-to better report on compound pages in general. Specifically, for compound pages
-with order > 1, the exact (hpage_pinned_refcount) pincount is reported.
+dump_page() has been enhanced slightly to handle these new counting
+fields, and to better report on large folios in general.  Specifically,
+for large folios, the exact pincount is reported.
 
 References
 ==========
diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst
index e08bbe9b0cbf..dfe7e75a71de 100644
--- a/Documentation/core-api/printk-formats.rst
+++ b/Documentation/core-api/printk-formats.rst
@@ -575,20 +575,26 @@ The field width is passed by value, the bitmap is passed by reference.
 Helper macros cpumask_pr_args() and nodemask_pr_args() are available to ease
 printing cpumask and nodemask.
 
-Flags bitfields such as page flags, gfp_flags
----------------------------------------------
+Flags bitfields such as page flags, page_type, gfp_flags
+--------------------------------------------------------
 
 ::
 
-	%pGp	referenced|uptodate|lru|active|private|node=0|zone=2|lastcpupid=0x1fffff
+	%pGp	0x17ffffc0002036(referenced|uptodate|lru|active|private|node=0|zone=2|lastcpupid=0x1fffff)
+	%pGt	0xffffff7f(buddy)
 	%pGg	GFP_USER|GFP_DMA32|GFP_NOWARN
 	%pGv	read|exec|mayread|maywrite|mayexec|denywrite
 
 For printing flags bitfields as a collection of symbolic constants that
 would construct the value. The type of flags is given by the third
-character. Currently supported are [p]age flags, [v]ma_flags (both
-expect ``unsigned long *``) and [g]fp_flags (expects ``gfp_t *``). The flag
-names and print order depends on the particular	type.
+character. Currently supported are:
+
+        - p - [p]age flags, expects value of type (``unsigned long *``)
+        - t - page [t]ype, expects value of type (``unsigned int *``)
+        - v - [v]ma_flags, expects value of type (``unsigned long *``)
+        - g - [g]fp_flags, expects value of type (``gfp_t *``)
+
+The flag names and print order depends on the particular type.
 
 Note that this format should not be used directly in the
 :c:func:`TP_printk()` part of a tracepoint. Instead, use the show_*_flags()
@@ -625,6 +631,16 @@ Examples::
 	%p4cc	Y10  little-endian (0x20303159)
 	%p4cc	NV12 big-endian (0xb231564e)
 
+Rust
+----
+
+::
+
+	%pA
+
+Only intended to be used from Rust code to format ``core::fmt::Arguments``.
+Do *not* use it from C.
+
 Thanks
 ======
 
diff --git a/Documentation/core-api/printk-index.rst b/Documentation/core-api/printk-index.rst
new file mode 100644
index 000000000000..3062f37d119b
--- /dev/null
+++ b/Documentation/core-api/printk-index.rst
@@ -0,0 +1,137 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============
+Printk Index
+============
+
+There are many ways how to monitor the state of the system. One important
+source of information is the system log. It provides a lot of information,
+including more or less important warnings and error messages.
+
+There are monitoring tools that filter and take action based on messages
+logged.
+
+The kernel messages are evolving together with the code. As a result,
+particular kernel messages are not KABI and never will be!
+
+It is a huge challenge for maintaining the system log monitors. It requires
+knowing what messages were updated in a particular kernel version and why.
+Finding these changes in the sources would require non-trivial parsers.
+Also it would require matching the sources with the binary kernel which
+is not always trivial. Various changes might be backported. Various kernel
+versions might be used on different monitored systems.
+
+This is where the printk index feature might become useful. It provides
+a dump of printk formats used all over the source code used for the kernel
+and modules on the running system. It is accessible at runtime via debugfs.
+
+The printk index helps to find changes in the message formats. Also it helps
+to track the strings back to the kernel sources and the related commit.
+
+
+User Interface
+==============
+
+The index of printk formats are split in into separate files. The files are
+named according to the binaries where the printk formats are built-in. There
+is always "vmlinux" and optionally also modules, for example::
+
+   /sys/kernel/debug/printk/index/vmlinux
+   /sys/kernel/debug/printk/index/ext4
+   /sys/kernel/debug/printk/index/scsi_mod
+
+Note that only loaded modules are shown. Also printk formats from a module
+might appear in "vmlinux" when the module is built-in.
+
+The content is inspired by the dynamic debug interface and looks like::
+
+   $> head -1 /sys/kernel/debug/printk/index/vmlinux; shuf -n 5 vmlinux
+   # <level[,flags]> filename:line function "format"
+   <5> block/blk-settings.c:661 disk_stack_limits "%s: Warning: Device %s is misaligned\n"
+   <4> kernel/trace/trace.c:8296 trace_create_file "Could not create tracefs '%s' entry\n"
+   <6> arch/x86/kernel/hpet.c:144 _hpet_print_config "hpet: %s(%d):\n"
+   <6> init/do_mounts.c:605 prepare_namespace "Waiting for root device %s...\n"
+   <6> drivers/acpi/osl.c:1410 acpi_no_auto_serialize_setup "ACPI: auto-serialization disabled\n"
+
+, where the meaning is:
+
+   - :level: log level value: 0-7 for particular severity, -1 as default,
+	'c' as continuous line without an explicit log level
+   - :flags: optional flags: currently only 'c' for KERN_CONT
+   - :filename\:line: source filename and line number of the related
+	printk() call. Note that there are many wrappers, for example,
+	pr_warn(), pr_warn_once(), dev_warn().
+   - :function: function name where the printk() call is used.
+   - :format: format string
+
+The extra information makes it a bit harder to find differences
+between various kernels. Especially the line number might change
+very often. On the other hand, it helps a lot to confirm that
+it is the same string or find the commit that is responsible
+for eventual changes.
+
+
+printk() Is Not a Stable KABI
+=============================
+
+Several developers are afraid that exporting all these implementation
+details into the user space will transform particular printk() calls
+into KABI.
+
+But it is exactly the opposite. printk() calls must _not_ be KABI.
+And the printk index helps user space tools to deal with this.
+
+
+Subsystem specific printk wrappers
+==================================
+
+The printk index is generated using extra metadata that are stored in
+a dedicated .elf section ".printk_index". It is achieved using macro
+wrappers doing __printk_index_emit() together with the real printk()
+call. The same technique is used also for the metadata used by
+the dynamic debug feature.
+
+The metadata are stored for a particular message only when it is printed
+using these special wrappers. It is implemented for the commonly
+used printk() calls, including, for example, pr_warn(), or pr_once().
+
+Additional changes are necessary for various subsystem specific wrappers
+that call the original printk() via a common helper function. These needs
+their own wrappers adding __printk_index_emit().
+
+Only few subsystem specific wrappers have been updated so far,
+for example, dev_printk(). As a result, the printk formats from
+some subsystes can be missing in the printk index.
+
+
+Subsystem specific prefix
+=========================
+
+The macro pr_fmt() macro allows to define a prefix that is printed
+before the string generated by the related printk() calls.
+
+Subsystem specific wrappers usually add even more complicated
+prefixes.
+
+These prefixes can be stored into the printk index metadata
+by an optional parameter of __printk_index_emit(). The debugfs
+interface might then show the printk formats including these prefixes.
+For example, drivers/acpi/osl.c contains::
+
+  #define pr_fmt(fmt) "ACPI: OSL: " fmt
+
+  static int __init acpi_no_auto_serialize_setup(char *str)
+  {
+	acpi_gbl_auto_serialize_methods = FALSE;
+	pr_info("Auto-serialization disabled\n");
+
+	return 1;
+  }
+
+This results in the following printk index entry::
+
+  <6> drivers/acpi/osl.c:1410 acpi_no_auto_serialize_setup "ACPI: auto-serialization disabled\n"
+
+It helps matching messages from the real log with printk index.
+Then the source file name, line number, and function name can
+be used to match the string with the source code.
diff --git a/Documentation/core-api/protection-keys.rst b/Documentation/core-api/protection-keys.rst
index ec575e72d0b2..bf28ac0401f3 100644
--- a/Documentation/core-api/protection-keys.rst
+++ b/Documentation/core-api/protection-keys.rst
@@ -4,31 +4,29 @@
 Memory Protection Keys
 ======================
 
-Memory Protection Keys for Userspace (PKU aka PKEYs) is a feature
-which is found on Intel's Skylake (and later) "Scalable Processor"
-Server CPUs. It will be available in future non-server Intel parts
-and future AMD processors.
-
-For anyone wishing to test or use this feature, it is available in
-Amazon's EC2 C5 instances and is known to work there using an Ubuntu
-17.04 image.
-
-Memory Protection Keys provides a mechanism for enforcing page-based
-protections, but without requiring modification of the page tables
-when an application changes protection domains.  It works by
-dedicating 4 previously ignored bits in each page table entry to a
-"protection key", giving 16 possible keys.
-
-There is also a new user-accessible register (PKRU) with two separate
-bits (Access Disable and Write Disable) for each key.  Being a CPU
-register, PKRU is inherently thread-local, potentially giving each
+Memory Protection Keys provide a mechanism for enforcing page-based
+protections, but without requiring modification of the page tables when an
+application changes protection domains.
+
+Pkeys Userspace (PKU) is a feature which can be found on:
+        * Intel server CPUs, Skylake and later
+        * Intel client CPUs, Tiger Lake (11th Gen Core) and later
+        * Future AMD CPUs
+
+Pkeys work by dedicating 4 previously Reserved bits in each page table entry to
+a "protection key", giving 16 possible keys.
+
+Protections for each key are defined with a per-CPU user-accessible register
+(PKRU).  Each of these is a 32-bit register storing two bits (Access Disable
+and Write Disable) for each of 16 keys.
+
+Being a CPU register, PKRU is inherently thread-local, potentially giving each
 thread a different set of protections from every other thread.
 
-There are two new instructions (RDPKRU/WRPKRU) for reading and writing
-to the new register.  The feature is only available in 64-bit mode,
-even though there is theoretically space in the PAE PTEs.  These
-permissions are enforced on data access only and have no effect on
-instruction fetches.
+There are two instructions (RDPKRU/WRPKRU) for reading and writing to the
+register.  The feature is only available in 64-bit mode, even though there is
+theoretically space in the PAE PTEs.  These permissions are enforced on data
+access only and have no effect on instruction fetches.
 
 Syscalls
 ========
diff --git a/Documentation/core-api/symbol-namespaces.rst b/Documentation/core-api/symbol-namespaces.rst
index 5ad9e0abe42c..12e4aecdae94 100644
--- a/Documentation/core-api/symbol-namespaces.rst
+++ b/Documentation/core-api/symbol-namespaces.rst
@@ -51,8 +51,8 @@ namespace ``USB_STORAGE``, use::
 The corresponding ksymtab entry struct ``kernel_symbol`` will have the member
 ``namespace`` set accordingly. A symbol that is exported without a namespace will
 refer to ``NULL``. There is no default namespace if none is defined. ``modpost``
-and kernel/module.c make use the namespace at build time or module load time,
-respectively.
+and kernel/module/main.c make use the namespace at build time or module load
+time, respectively.
 
 2.2 Using the DEFAULT_SYMBOL_NAMESPACE define
 =============================================
diff --git a/Documentation/core-api/timekeeping.rst b/Documentation/core-api/timekeeping.rst
index 729e24864fe7..22ec68f24421 100644
--- a/Documentation/core-api/timekeeping.rst
+++ b/Documentation/core-api/timekeeping.rst
@@ -132,6 +132,7 @@ Some additional variants exist for more specialized cases:
 .. c:function:: u64 ktime_get_mono_fast_ns( void )
 		u64 ktime_get_raw_fast_ns( void )
 		u64 ktime_get_boot_fast_ns( void )
+		u64 ktime_get_tai_fast_ns( void )
 		u64 ktime_get_real_fast_ns( void )
 
 	These variants are safe to call from any context, including from
diff --git a/Documentation/watch_queue.rst b/Documentation/core-api/watch_queue.rst
index 54f13ad5fc17..54f13ad5fc17 100644
--- a/Documentation/watch_queue.rst
+++ b/Documentation/core-api/watch_queue.rst
diff --git a/Documentation/core-api/workqueue.rst b/Documentation/core-api/workqueue.rst
index 541d31de8926..8ec4d6270b24 100644
--- a/Documentation/core-api/workqueue.rst
+++ b/Documentation/core-api/workqueue.rst
@@ -216,10 +216,6 @@ resources, scheduled and executed.
 
   This flag is meaningless for unbound wq.
 
-Note that the flag ``WQ_NON_REENTRANT`` no longer exists as all
-workqueues are now non-reentrant - any work item is guaranteed to be
-executed by at most one worker system-wide at any given time.
-
 
 ``max_active``
 --------------
@@ -374,8 +370,8 @@ of possible problems:
 
 The first one can be tracked using tracing: ::
 
-	$ echo workqueue:workqueue_queue_work > /sys/kernel/debug/tracing/set_event
-	$ cat /sys/kernel/debug/tracing/trace_pipe > out.txt
+	$ echo workqueue:workqueue_queue_work > /sys/kernel/tracing/set_event
+	$ cat /sys/kernel/tracing/trace_pipe > out.txt
 	(wait a few secs)
 	^C
 
@@ -391,6 +387,23 @@ the stack trace of the offending worker thread. ::
 The work item's function should be trivially visible in the stack
 trace.
 
+Non-reentrance Conditions
+=========================
+
+Workqueue guarantees that a work item cannot be re-entrant if the following
+conditions hold after a work item gets queued:
+
+        1. The work function hasn't been changed.
+        2. No one queues the work item to another workqueue.
+        3. The work item hasn't been reinitiated.
+
+In other words, if the above conditions hold, the work item is guaranteed to be
+executed by at most one worker system-wide at any given time.
+
+Note that requeuing the work item (to the same queue) in the self function
+doesn't break these conditions, so it's safe to do. Otherwise, caution is
+required when breaking the conditions inside a work function.
+
 
 Kernel Inline Documentations Reference
 ======================================
diff --git a/Documentation/core-api/wrappers/atomic_bitops.rst b/Documentation/core-api/wrappers/atomic_bitops.rst
new file mode 100644
index 000000000000..bf24e4081a8f
--- /dev/null
+++ b/Documentation/core-api/wrappers/atomic_bitops.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+   This is a simple wrapper to bring atomic_bitops.txt into the RST world
+   until such a time as that file can be converted directly.
+
+=============
+Atomic bitops
+=============
+
+.. raw:: latex
+
+    \footnotesize
+
+.. include:: ../../atomic_bitops.txt
+   :literal:
+
+.. raw:: latex
+
+    \normalsize
diff --git a/Documentation/core-api/wrappers/atomic_t.rst b/Documentation/core-api/wrappers/atomic_t.rst
new file mode 100644
index 000000000000..ed109a964c77
--- /dev/null
+++ b/Documentation/core-api/wrappers/atomic_t.rst
@@ -0,0 +1,19 @@
+.. SPDX-License-Identifier: GPL-2.0
+   This is a simple wrapper to bring atomic_t.txt into the RST world
+   until such a time as that file can be converted directly.
+
+============
+Atomic types
+============
+
+.. raw:: latex
+
+    \footnotesize
+
+.. include:: ../../atomic_t.txt
+   :literal:
+
+.. raw:: latex
+
+    \normalsize
+
diff --git a/Documentation/core-api/wrappers/memory-barriers.rst b/Documentation/core-api/wrappers/memory-barriers.rst
new file mode 100644
index 000000000000..532460b5e3eb
--- /dev/null
+++ b/Documentation/core-api/wrappers/memory-barriers.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+   This is a simple wrapper to bring memory-barriers.txt into the RST world
+   until such a time as that file can be converted directly.
+
+============================
+Linux kernel memory barriers
+============================
+
+.. raw:: latex
+
+    \footnotesize
+
+.. include:: ../../memory-barriers.txt
+   :literal:
+
+.. raw:: latex
+
+    \normalsize
diff --git a/Documentation/core-api/xarray.rst b/Documentation/core-api/xarray.rst
index a137a0e6d068..77e0ece2b1d6 100644
--- a/Documentation/core-api/xarray.rst
+++ b/Documentation/core-api/xarray.rst
@@ -315,11 +315,15 @@ indeed the normal API is implemented in terms of the advanced API.  The
 advanced API is only available to modules with a GPL-compatible license.
 
 The advanced API is based around the xa_state.  This is an opaque data
-structure which you declare on the stack using the XA_STATE()
-macro.  This macro initialises the xa_state ready to start walking
-around the XArray.  It is used as a cursor to maintain the position
-in the XArray and let you compose various operations together without
-having to restart from the top every time.
+structure which you declare on the stack using the XA_STATE() macro.
+This macro initialises the xa_state ready to start walking around the
+XArray.  It is used as a cursor to maintain the position in the XArray
+and let you compose various operations together without having to restart
+from the top every time.  The contents of the xa_state are protected by
+the rcu_read_lock() or the xas_lock().  If you need to drop whichever of
+those locks is protecting your state and tree, you must call xas_pause()
+so that future calls do not rely on the parts of the state which were
+left unprotected.
 
 The xa_state is also used to store errors.  You can call
 xas_error() to retrieve the error.  All operations check whether
diff --git a/Documentation/cpu-freq/core.rst b/Documentation/cpu-freq/core.rst
index 33cb90bd1d8f..4ceef8e7217c 100644
--- a/Documentation/cpu-freq/core.rst
+++ b/Documentation/cpu-freq/core.rst
@@ -73,12 +73,12 @@ CPUFREQ_POSTCHANGE.
 The third argument is a struct cpufreq_freqs with the following
 values:
 
-=====	===========================
-cpu	number of the affected CPU
+======	======================================
+policy	a pointer to the struct cpufreq_policy
 old	old frequency
 new	new frequency
 flags	flags of the cpufreq driver
-=====	===========================
+======	======================================
 
 3. CPUFreq Table Generation with Operating Performance Point (OPP)
 ==================================================================
diff --git a/Documentation/cpu-freq/cpu-drivers.rst b/Documentation/cpu-freq/cpu-drivers.rst
index 3b32336a7803..d84ededb66f9 100644
--- a/Documentation/cpu-freq/cpu-drivers.rst
+++ b/Documentation/cpu-freq/cpu-drivers.rst
@@ -75,6 +75,9 @@ And optionally
  .resume - A pointer to a per-policy resume function which is called
  with interrupts disabled and _before_ the governor is started again.
 
+ .ready - A pointer to a per-policy ready function which is called after
+ the policy is fully initialized.
+
  .attr - A pointer to a NULL-terminated list of "struct freq_attr" which
  allow to export values to sysfs.
 
diff --git a/Documentation/cpu-freq/index.rst b/Documentation/cpu-freq/index.rst
index aba7831ab1cb..de25740651f7 100644
--- a/Documentation/cpu-freq/index.rst
+++ b/Documentation/cpu-freq/index.rst
@@ -1,8 +1,8 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-==============================================================================
-Linux CPUFreq - CPU frequency and voltage scaling code in the Linux(TM) kernel
-==============================================================================
+========================================================================
+CPUFreq - CPU frequency and voltage scaling code in the Linux(TM) kernel
+========================================================================
 
 Author: Dominik Brodowski  <linux@brodo.de>
 
@@ -20,18 +20,15 @@ Author: Dominik Brodowski  <linux@brodo.de>
 
 Mailing List
 ------------
-There is a CPU frequency changing CVS commit and general list where
-you can report bugs, problems or submit patches. To post a message,
-send an email to linux-pm@vger.kernel.org.
+There is a CPU frequency general list where you can report bugs,
+problems or submit patches. To post a message, send an email to
+linux-pm@vger.kernel.org.
 
 Links
 -----
 the FTP archives:
 * ftp://ftp.linux.org.uk/pub/linux/cpufreq/
 
-how to access the CVS repository:
-* http://cvs.arm.linux.org.uk/
-
 the CPUFreq Mailing list:
 * http://vger.kernel.org/vger-lists.html#linux-pm
 
diff --git a/Documentation/crypto/crypto_engine.rst b/Documentation/crypto/crypto_engine.rst
index 25cf9836c336..d562ea17d994 100644
--- a/Documentation/crypto/crypto_engine.rst
+++ b/Documentation/crypto/crypto_engine.rst
@@ -69,6 +69,8 @@ the crypto engine via one of:
 
 * crypto_transfer_hash_request_to_engine()
 
+* crypto_transfer_kpp_request_to_engine()
+
 * crypto_transfer_skcipher_request_to_engine()
 
 At the end of the request process, a call to one of the following functions is needed:
@@ -79,4 +81,6 @@ At the end of the request process, a call to one of the following functions is n
 
 * crypto_finalize_hash_request()
 
+* crypto_finalize_kpp_request()
+
 * crypto_finalize_skcipher_request()
diff --git a/Documentation/crypto/devel-algos.rst b/Documentation/crypto/devel-algos.rst
index f225a953ab4b..3506899ef83e 100644
--- a/Documentation/crypto/devel-algos.rst
+++ b/Documentation/crypto/devel-algos.rst
@@ -172,7 +172,7 @@ Here are schematics of how these functions are called when operated from
 other part of the kernel. Note that the .setkey() call might happen
 before or after any of these schematics happen, but must not happen
 during any of these are in-flight. Please note that calling .init()
-followed immediately by .finish() is also a perfectly valid
+followed immediately by .final() is also a perfectly valid
 transformation.
 
 ::
diff --git a/Documentation/crypto/index.rst b/Documentation/crypto/index.rst
index 21338fa92642..da5d5ad2bdf3 100644
--- a/Documentation/crypto/index.rst
+++ b/Documentation/crypto/index.rst
@@ -1,6 +1,6 @@
-=======================
-Linux Kernel Crypto API
-=======================
+==========
+Crypto API
+==========
 
 :Author: Stephan Mueller
 :Author: Marek Vasut
diff --git a/Documentation/crypto/userspace-if.rst b/Documentation/crypto/userspace-if.rst
index b45dabbf69d6..f80f243e227e 100644
--- a/Documentation/crypto/userspace-if.rst
+++ b/Documentation/crypto/userspace-if.rst
@@ -131,9 +131,9 @@ from the kernel crypto API. If the buffer is too small for the message
 digest, the flag MSG_TRUNC is set by the kernel.
 
 In order to set a message digest key, the calling application must use
-the setsockopt() option of ALG_SET_KEY. If the key is not set the HMAC
-operation is performed without the initial HMAC state change caused by
-the key.
+the setsockopt() option of ALG_SET_KEY or ALG_SET_KEY_BY_KEY_SERIAL. If the
+key is not set the HMAC operation is performed without the initial HMAC state
+change caused by the key.
 
 Symmetric Cipher API
 --------------------
@@ -382,6 +382,15 @@ mentioned optname:
 
    -  the RNG cipher type to provide the seed
 
+- ALG_SET_KEY_BY_KEY_SERIAL -- Setting the key via keyring key_serial_t.
+   This operation behaves the same as ALG_SET_KEY. The decrypted
+   data is copied from a keyring key, and uses that data as the
+   key for symmetric encryption.
+
+   The passed in key_serial_t must have the KEY_(POS|USR|GRP|OTH)_SEARCH
+   permission set, otherwise -EPERM is returned. Supports key types: user,
+   logon, encrypted, and trusted.
+
 -  ALG_SET_AEAD_AUTHSIZE -- Setting the authentication tag size for
    AEAD ciphers. For a encryption operation, the authentication tag of
    the given size will be generated. For a decryption operation, the
diff --git a/Documentation/dev-tools/checkpatch.rst b/Documentation/dev-tools/checkpatch.rst
index f0956e9ea2d8..c3389c6f3838 100644
--- a/Documentation/dev-tools/checkpatch.rst
+++ b/Documentation/dev-tools/checkpatch.rst
@@ -612,6 +612,13 @@ Commit message
 
     See: https://www.kernel.org/doc/html/latest/process/submitting-patches.html#describe-your-changes
 
+  **BAD_FIXES_TAG**
+    The Fixes: tag is malformed or does not follow the community conventions.
+    This can occur if the tag have been split into multiple lines (e.g., when
+    pasted in an email program with word wrapping enabled).
+
+    See: https://www.kernel.org/doc/html/latest/process/submitting-patches.html#describe-your-changes
+
 
 Comparison style
 ----------------
@@ -710,6 +717,39 @@ Indentation and Line Breaks
 
     See: https://www.kernel.org/doc/html/latest/process/coding-style.html#breaking-long-lines-and-strings
 
+  **SPLIT_STRING**
+    Quoted strings that appear as messages in userspace and can be
+    grepped, should not be split across multiple lines.
+
+    See: https://lore.kernel.org/lkml/20120203052727.GA15035@leaf/
+
+  **MULTILINE_DEREFERENCE**
+    A single dereferencing identifier spanned on multiple lines like::
+
+      struct_identifier->member[index].
+      member = <foo>;
+
+    is generally hard to follow. It can easily lead to typos and so makes
+    the code vulnerable to bugs.
+
+    If fixing the multiple line dereferencing leads to an 80 column
+    violation, then either rewrite the code in a more simple way or if the
+    starting part of the dereferencing identifier is the same and used at
+    multiple places then store it in a temporary variable, and use that
+    temporary variable only at all the places. For example, if there are
+    two dereferencing identifiers::
+
+      member1->member2->member3.foo1;
+      member1->member2->member3.foo2;
+
+    then store the member1->member2->member3 part in a temporary variable.
+    It not only helps to avoid the 80 column violation but also reduces
+    the program size by removing the unnecessary dereferences.
+
+    But if none of the above methods work then ignore the 80 column
+    violation because it is much easier to read a dereferencing identifier
+    on a single line.
+
   **TRAILING_STATEMENTS**
     Trailing statements (for example after any conditional) should be
     on the next line.
@@ -845,6 +885,38 @@ Macros, Attributes and Symbols
     Use the `fallthrough;` pseudo keyword instead of
     `/* fallthrough */` like comments.
 
+  **TRAILING_SEMICOLON**
+    Macro definition should not end with a semicolon. The macro
+    invocation style should be consistent with function calls.
+    This can prevent any unexpected code paths::
+
+      #define MAC do_something;
+
+    If this macro is used within a if else statement, like::
+
+      if (some_condition)
+              MAC;
+
+      else
+              do_something;
+
+    Then there would be a compilation error, because when the macro is
+    expanded there are two trailing semicolons, so the else branch gets
+    orphaned.
+
+    See: https://lore.kernel.org/lkml/1399671106.2912.21.camel@joe-AO725/
+
+  **SINGLE_STATEMENT_DO_WHILE_MACRO**
+    For the multi-statement macros, it is necessary to use the do-while
+    loop to avoid unpredictable code paths. The do-while loop helps to
+    group the multiple statements into a single one so that a
+    function-like macro can be used as a function only.
+
+    But for the single statement macros, it is unnecessary to use the
+    do-while loop. Although the code is syntactically correct but using
+    the do-while loop is redundant. So remove the do-while loop for single
+    statement macros.
+
   **WEAK_DECLARATION**
     Using weak declarations like __attribute__((weak)) or __weak
     can have unintended link defects.  Avoid using them.
@@ -920,6 +992,11 @@ Functions and Variables
     Your compiler (or rather your loader) automatically does
     it for you.
 
+  **MULTIPLE_ASSIGNMENTS**
+    Multiple assignments on a single line makes the code unnecessarily
+    complicated. So on a single line assign value to a single variable
+    only, this makes the code more readable and helps avoid typos.
+
   **RETURN_PARENTHESES**
     return is not a function and as such doesn't need parentheses::
 
@@ -957,6 +1034,17 @@ Permissions
     Permission bits should use 4 digit octal permissions (like 0700 or 0444).
     Avoid using any other base like decimal.
 
+  **SYMBOLIC_PERMS**
+    Permission bits in the octal form are more readable and easier to
+    understand than their symbolic counterparts because many command-line
+    tools use this notation. Experienced kernel developers have been using
+    these traditional Unix permission bits for decades and so they find it
+    easier to understand the octal notation than the symbolic macros.
+    For example, it is harder to read S_IWUSR|S_IRUGO than 0644, which
+    obscures the developer's intent rather than clarifying it.
+
+    See: https://lore.kernel.org/lkml/CA+55aFw5v23T-zvDZp-MmD_EYxF8WbafwwB59934FV7g21uMGQ@mail.gmail.com/
+
 
 Spacing and Brackets
 --------------------
diff --git a/Documentation/dev-tools/coccinelle.rst b/Documentation/dev-tools/coccinelle.rst
index 9c454de5a7f7..535ce126fb4f 100644
--- a/Documentation/dev-tools/coccinelle.rst
+++ b/Documentation/dev-tools/coccinelle.rst
@@ -66,7 +66,7 @@ The wiki documentation always refers to the linux-next version of the script.
 
 For Semantic Patch Language(SmPL) grammar documentation refer to:
 
-http://coccinelle.lip6.fr/documentation.php
+https://coccinelle.gitlabpages.inria.fr/website/docs/main_grammar.html
 
 Using Coccinelle on the Linux kernel
 ------------------------------------
@@ -219,7 +219,7 @@ instance::
     cat cocci.err
 
 You can use SPFLAGS to add debugging flags; for instance you may want to
-add both --profile --show-trying to SPFLAGS when debugging. For example
+add both ``--profile --show-trying`` to SPFLAGS when debugging. For example
 you may want to use::
 
     rm -f err.log
@@ -248,7 +248,7 @@ variables for .cocciconfig is as follows:
 
 - Your current user's home directory is processed first
 - Your directory from which spatch is called is processed next
-- The directory provided with the --dir option is processed last, if used
+- The directory provided with the ``--dir`` option is processed last, if used
 
 Since coccicheck runs through make, it naturally runs from the kernel
 proper dir; as such the second rule above would be implied for picking up a
@@ -265,8 +265,8 @@ The kernel coccicheck script has::
     fi
 
 KBUILD_EXTMOD is set when an explicit target with M= is used. For both cases
-the spatch --dir argument is used, as such third rule applies when whether M=
-is used or not, and when M= is used the target directory can have its own
+the spatch ``--dir`` argument is used, as such third rule applies when whether
+M= is used or not, and when M= is used the target directory can have its own
 .cocciconfig file. When M= is not passed as an argument to coccicheck the
 target directory is the same as the directory from where spatch was called.
 
diff --git a/Documentation/dev-tools/gdb-kernel-debugging.rst b/Documentation/dev-tools/gdb-kernel-debugging.rst
index 8e0f1fe8d17a..895285c037c7 100644
--- a/Documentation/dev-tools/gdb-kernel-debugging.rst
+++ b/Documentation/dev-tools/gdb-kernel-debugging.rst
@@ -39,6 +39,10 @@ Setup
   this mode. In this case, you should build the kernel with
   CONFIG_RANDOMIZE_BASE disabled if the architecture supports KASLR.
 
+- Build the gdb scripts (required on kernels v5.1 and above)::
+
+    make scripts_gdb
+
 - Enable the gdb stub of QEMU/KVM, either
 
     - at VM startup time by appending "-s" to the QEMU command line
diff --git a/Documentation/dev-tools/index.rst b/Documentation/dev-tools/index.rst
index 010a2af1e7d9..6b0663075dc0 100644
--- a/Documentation/dev-tools/index.rst
+++ b/Documentation/dev-tools/index.rst
@@ -24,6 +24,7 @@ Documentation/dev-tools/testing-overview.rst
    kcov
    gcov
    kasan
+   kmsan
    ubsan
    kmemleak
    kcsan
@@ -32,6 +33,7 @@ Documentation/dev-tools/testing-overview.rst
    kgdb
    kselftest
    kunit/index
+   ktap
 
 
 .. only::  subproject and html
diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst
index 21dc03bc10a4..e66916a483cd 100644
--- a/Documentation/dev-tools/kasan.rst
+++ b/Documentation/dev-tools/kasan.rst
@@ -4,39 +4,76 @@ The Kernel Address Sanitizer (KASAN)
 Overview
 --------
 
-KernelAddressSANitizer (KASAN) is a dynamic memory safety error detector
-designed to find out-of-bound and use-after-free bugs. KASAN has three modes:
+Kernel Address Sanitizer (KASAN) is a dynamic memory safety error detector
+designed to find out-of-bounds and use-after-free bugs.
 
-1. generic KASAN (similar to userspace ASan),
-2. software tag-based KASAN (similar to userspace HWASan),
-3. hardware tag-based KASAN (based on hardware memory tagging).
+KASAN has three modes:
 
-Generic KASAN is mainly used for debugging due to a large memory overhead.
-Software tag-based KASAN can be used for dogfood testing as it has a lower
-memory overhead that allows using it with real workloads. Hardware tag-based
-KASAN comes with low memory and performance overheads and, therefore, can be
-used in production. Either as an in-field memory bug detector or as a security
-mitigation.
+1. Generic KASAN
+2. Software Tag-Based KASAN
+3. Hardware Tag-Based KASAN
 
-Software KASAN modes (#1 and #2) use compile-time instrumentation to insert
-validity checks before every memory access and, therefore, require a compiler
-version that supports that.
+Generic KASAN, enabled with CONFIG_KASAN_GENERIC, is the mode intended for
+debugging, similar to userspace ASan. This mode is supported on many CPU
+architectures, but it has significant performance and memory overheads.
 
-Generic KASAN is supported in GCC and Clang. With GCC, it requires version
-8.3.0 or later. Any supported Clang version is compatible, but detection of
-out-of-bounds accesses for global variables is only supported since Clang 11.
+Software Tag-Based KASAN or SW_TAGS KASAN, enabled with CONFIG_KASAN_SW_TAGS,
+can be used for both debugging and dogfood testing, similar to userspace HWASan.
+This mode is only supported for arm64, but its moderate memory overhead allows
+using it for testing on memory-restricted devices with real workloads.
 
-Software tag-based KASAN mode is only supported in Clang.
+Hardware Tag-Based KASAN or HW_TAGS KASAN, enabled with CONFIG_KASAN_HW_TAGS,
+is the mode intended to be used as an in-field memory bug detector or as a
+security mitigation. This mode only works on arm64 CPUs that support MTE
+(Memory Tagging Extension), but it has low memory and performance overheads and
+thus can be used in production.
 
-The hardware KASAN mode (#3) relies on hardware to perform the checks but
-still requires a compiler version that supports memory tagging instructions.
-This mode is supported in GCC 10+ and Clang 11+.
+For details about the memory and performance impact of each KASAN mode, see the
+descriptions of the corresponding Kconfig options.
 
-Both software KASAN modes work with SLUB and SLAB memory allocators,
-while the hardware tag-based KASAN currently only supports SLUB.
+The Generic and the Software Tag-Based modes are commonly referred to as the
+software modes. The Software Tag-Based and the Hardware Tag-Based modes are
+referred to as the tag-based modes.
 
-Currently, generic KASAN is supported for the x86_64, arm, arm64, xtensa, s390,
-and riscv architectures, and tag-based KASAN modes are supported only for arm64.
+Support
+-------
+
+Architectures
+~~~~~~~~~~~~~
+
+Generic KASAN is supported on x86_64, arm, arm64, powerpc, riscv, s390, and
+xtensa, and the tag-based KASAN modes are supported only on arm64.
+
+Compilers
+~~~~~~~~~
+
+Software KASAN modes use compile-time instrumentation to insert validity checks
+before every memory access and thus require a compiler version that provides
+support for that. The Hardware Tag-Based mode relies on hardware to perform
+these checks but still requires a compiler version that supports the memory
+tagging instructions.
+
+Generic KASAN requires GCC version 8.3.0 or later
+or any Clang version supported by the kernel.
+
+Software Tag-Based KASAN requires GCC 11+
+or any Clang version supported by the kernel.
+
+Hardware Tag-Based KASAN requires GCC 10+ or Clang 12+.
+
+Memory types
+~~~~~~~~~~~~
+
+Generic KASAN supports finding bugs in all of slab, page_alloc, vmap, vmalloc,
+stack, and global memory.
+
+Software Tag-Based KASAN supports slab, page_alloc, vmalloc, and stack memory.
+
+Hardware Tag-Based KASAN supports slab, page_alloc, and non-executable vmalloc
+memory.
+
+For slab, both software KASAN modes support SLUB and SLAB allocators, while
+Hardware Tag-Based KASAN only supports SLUB.
 
 Usage
 -----
@@ -45,18 +82,81 @@ To enable KASAN, configure the kernel with::
 
 	  CONFIG_KASAN=y
 
-and choose between ``CONFIG_KASAN_GENERIC`` (to enable generic KASAN),
-``CONFIG_KASAN_SW_TAGS`` (to enable software tag-based KASAN), and
-``CONFIG_KASAN_HW_TAGS`` (to enable hardware tag-based KASAN).
+and choose between ``CONFIG_KASAN_GENERIC`` (to enable Generic KASAN),
+``CONFIG_KASAN_SW_TAGS`` (to enable Software Tag-Based KASAN), and
+``CONFIG_KASAN_HW_TAGS`` (to enable Hardware Tag-Based KASAN).
 
-For software modes, also choose between ``CONFIG_KASAN_OUTLINE`` and
+For the software modes, also choose between ``CONFIG_KASAN_OUTLINE`` and
 ``CONFIG_KASAN_INLINE``. Outline and inline are compiler instrumentation types.
-The former produces a smaller binary while the latter is 1.1-2 times faster.
+The former produces a smaller binary while the latter is up to 2 times faster.
 
 To include alloc and free stack traces of affected slab objects into reports,
 enable ``CONFIG_STACKTRACE``. To include alloc and free stack traces of affected
 physical pages, enable ``CONFIG_PAGE_OWNER`` and boot with ``page_owner=on``.
 
+Boot parameters
+~~~~~~~~~~~~~~~
+
+KASAN is affected by the generic ``panic_on_warn`` command line parameter.
+When it is enabled, KASAN panics the kernel after printing a bug report.
+
+By default, KASAN prints a bug report only for the first invalid memory access.
+With ``kasan_multi_shot``, KASAN prints a report on every invalid access. This
+effectively disables ``panic_on_warn`` for KASAN reports.
+
+Alternatively, independent of ``panic_on_warn``, the ``kasan.fault=`` boot
+parameter can be used to control panic and reporting behaviour:
+
+- ``kasan.fault=report`` or ``=panic`` controls whether to only print a KASAN
+  report or also panic the kernel (default: ``report``). The panic happens even
+  if ``kasan_multi_shot`` is enabled.
+
+Software and Hardware Tag-Based KASAN modes (see the section about various
+modes below) support altering stack trace collection behavior:
+
+- ``kasan.stacktrace=off`` or ``=on`` disables or enables alloc and free stack
+  traces collection (default: ``on``).
+- ``kasan.stack_ring_size=<number of entries>`` specifies the number of entries
+  in the stack ring (default: ``32768``).
+
+Hardware Tag-Based KASAN mode is intended for use in production as a security
+mitigation. Therefore, it supports additional boot parameters that allow
+disabling KASAN altogether or controlling its features:
+
+- ``kasan=off`` or ``=on`` controls whether KASAN is enabled (default: ``on``).
+
+- ``kasan.mode=sync``, ``=async`` or ``=asymm`` controls whether KASAN
+  is configured in synchronous, asynchronous or asymmetric mode of
+  execution (default: ``sync``).
+  Synchronous mode: a bad access is detected immediately when a tag
+  check fault occurs.
+  Asynchronous mode: a bad access detection is delayed. When a tag check
+  fault occurs, the information is stored in hardware (in the TFSR_EL1
+  register for arm64). The kernel periodically checks the hardware and
+  only reports tag faults during these checks.
+  Asymmetric mode: a bad access is detected synchronously on reads and
+  asynchronously on writes.
+
+- ``kasan.vmalloc=off`` or ``=on`` disables or enables tagging of vmalloc
+  allocations (default: ``on``).
+
+- ``kasan.page_alloc.sample=<sampling interval>`` makes KASAN tag only every
+  Nth page_alloc allocation with the order equal or greater than
+  ``kasan.page_alloc.sample.order``, where N is the value of the ``sample``
+  parameter (default: ``1``, or tag every such allocation).
+  This parameter is intended to mitigate the performance overhead introduced
+  by KASAN.
+  Note that enabling this parameter makes Hardware Tag-Based KASAN skip checks
+  of allocations chosen by sampling and thus miss bad accesses to these
+  allocations. Use the default value for accurate bug detection.
+
+- ``kasan.page_alloc.sample.order=<minimum page order>`` specifies the minimum
+  order of allocations that are affected by sampling (default: ``3``).
+  Only applies when ``kasan.page_alloc.sample`` is set to a value greater
+  than ``1``.
+  This parameter is intended to allow sampling only large page_alloc
+  allocations, which is the biggest source of the performance overhead.
+
 Error reports
 ~~~~~~~~~~~~~
 
@@ -146,7 +246,7 @@ is either 8 or 16 aligned bytes depending on KASAN mode. Each number in the
 memory state section of the report shows the state of one of the memory
 granules that surround the accessed address.
 
-For generic KASAN, the size of each memory granule is 8. The state of each
+For Generic KASAN, the size of each memory granule is 8. The state of each
 granule is encoded in one shadow byte. Those 8 bytes can be accessible,
 partially accessible, freed, or be a part of a redzone. KASAN uses the following
 encoding for each shadow byte: 00 means that all 8 bytes of the corresponding
@@ -171,41 +271,6 @@ traces point to places in code that interacted with the object but that are not
 directly present in the bad access stack trace. Currently, this includes
 call_rcu() and workqueue queuing.
 
-Boot parameters
-~~~~~~~~~~~~~~~
-
-KASAN is affected by the generic ``panic_on_warn`` command line parameter.
-When it is enabled, KASAN panics the kernel after printing a bug report.
-
-By default, KASAN prints a bug report only for the first invalid memory access.
-With ``kasan_multi_shot``, KASAN prints a report on every invalid access. This
-effectively disables ``panic_on_warn`` for KASAN reports.
-
-Alternatively, independent of ``panic_on_warn`` the ``kasan.fault=`` boot
-parameter can be used to control panic and reporting behaviour:
-
-- ``kasan.fault=report`` or ``=panic`` controls whether to only print a KASAN
-  report or also panic the kernel (default: ``report``). The panic happens even
-  if ``kasan_multi_shot`` is enabled.
-
-Hardware tag-based KASAN mode (see the section about various modes below) is
-intended for use in production as a security mitigation. Therefore, it supports
-additional boot parameters that allow disabling KASAN or controlling features:
-
-- ``kasan=off`` or ``=on`` controls whether KASAN is enabled (default: ``on``).
-
-- ``kasan.mode=sync`` or ``=async`` controls whether KASAN is configured in
-  synchronous or asynchronous mode of execution (default: ``sync``).
-  Synchronous mode: a bad access is detected immediately when a tag
-  check fault occurs.
-  Asynchronous mode: a bad access detection is delayed. When a tag check
-  fault occurs, the information is stored in hardware (in the TFSR_EL1
-  register for arm64). The kernel periodically checks the hardware and
-  only reports tag faults during these checks.
-
-- ``kasan.stacktrace=off`` or ``=on`` disables or enables alloc and free stack
-  traces collection (default: ``on``).
-
 Implementation details
 ----------------------
 
@@ -244,49 +309,46 @@ outline-instrumented kernel.
 Generic KASAN is the only mode that delays the reuse of freed objects via
 quarantine (see mm/kasan/quarantine.c for implementation).
 
-Software tag-based KASAN
+Software Tag-Based KASAN
 ~~~~~~~~~~~~~~~~~~~~~~~~
 
-Software tag-based KASAN uses a software memory tagging approach to checking
+Software Tag-Based KASAN uses a software memory tagging approach to checking
 access validity. It is currently only implemented for the arm64 architecture.
 
-Software tag-based KASAN uses the Top Byte Ignore (TBI) feature of arm64 CPUs
+Software Tag-Based KASAN uses the Top Byte Ignore (TBI) feature of arm64 CPUs
 to store a pointer tag in the top byte of kernel pointers. It uses shadow memory
 to store memory tags associated with each 16-byte memory cell (therefore, it
 dedicates 1/16th of the kernel memory for shadow memory).
 
-On each memory allocation, software tag-based KASAN generates a random tag, tags
+On each memory allocation, Software Tag-Based KASAN generates a random tag, tags
 the allocated memory with this tag, and embeds the same tag into the returned
 pointer.
 
-Software tag-based KASAN uses compile-time instrumentation to insert checks
+Software Tag-Based KASAN uses compile-time instrumentation to insert checks
 before each memory access. These checks make sure that the tag of the memory
 that is being accessed is equal to the tag of the pointer that is used to access
-this memory. In case of a tag mismatch, software tag-based KASAN prints a bug
+this memory. In case of a tag mismatch, Software Tag-Based KASAN prints a bug
 report.
 
-Software tag-based KASAN also has two instrumentation modes (outline, which
+Software Tag-Based KASAN also has two instrumentation modes (outline, which
 emits callbacks to check memory accesses; and inline, which performs the shadow
 memory checks inline). With outline instrumentation mode, a bug report is
 printed from the function that performs the access check. With inline
 instrumentation, a ``brk`` instruction is emitted by the compiler, and a
 dedicated ``brk`` handler is used to print bug reports.
 
-Software tag-based KASAN uses 0xFF as a match-all pointer tag (accesses through
+Software Tag-Based KASAN uses 0xFF as a match-all pointer tag (accesses through
 pointers with the 0xFF pointer tag are not checked). The value 0xFE is currently
 reserved to tag freed memory regions.
 
-Software tag-based KASAN currently only supports tagging of slab and page_alloc
-memory.
-
-Hardware tag-based KASAN
+Hardware Tag-Based KASAN
 ~~~~~~~~~~~~~~~~~~~~~~~~
 
-Hardware tag-based KASAN is similar to the software mode in concept but uses
+Hardware Tag-Based KASAN is similar to the software mode in concept but uses
 hardware memory tagging support instead of compiler instrumentation and
 shadow memory.
 
-Hardware tag-based KASAN is currently only implemented for arm64 architecture
+Hardware Tag-Based KASAN is currently only implemented for arm64 architecture
 and based on both arm64 Memory Tagging Extension (MTE) introduced in ARMv8.5
 Instruction Set Architecture and Top Byte Ignore (TBI).
 
@@ -296,26 +358,25 @@ access, hardware makes sure that the tag of the memory that is being accessed is
 equal to the tag of the pointer that is used to access this memory. In case of a
 tag mismatch, a fault is generated, and a report is printed.
 
-Hardware tag-based KASAN uses 0xFF as a match-all pointer tag (accesses through
+Hardware Tag-Based KASAN uses 0xFF as a match-all pointer tag (accesses through
 pointers with the 0xFF pointer tag are not checked). The value 0xFE is currently
 reserved to tag freed memory regions.
 
-Hardware tag-based KASAN currently only supports tagging of slab and page_alloc
-memory.
-
-If the hardware does not support MTE (pre ARMv8.5), hardware tag-based KASAN
+If the hardware does not support MTE (pre ARMv8.5), Hardware Tag-Based KASAN
 will not be enabled. In this case, all KASAN boot parameters are ignored.
 
 Note that enabling CONFIG_KASAN_HW_TAGS always results in in-kernel TBI being
 enabled. Even when ``kasan.mode=off`` is provided or when the hardware does not
 support MTE (but supports TBI).
 
-Hardware tag-based KASAN only reports the first found bug. After that, MTE tag
+Hardware Tag-Based KASAN only reports the first found bug. After that, MTE tag
 checking gets disabled.
 
 Shadow memory
 -------------
 
+The contents of this section are only applicable to software KASAN modes.
+
 The kernel maps memory in several different parts of the address space.
 The range of kernel virtual addresses is large: there is not enough real
 memory to support a real shadow region for every address that could be
@@ -346,7 +407,7 @@ CONFIG_KASAN_VMALLOC
 
 With ``CONFIG_KASAN_VMALLOC``, KASAN can cover vmalloc space at the
 cost of greater memory usage. Currently, this is supported on x86,
-riscv, s390, and powerpc.
+arm64, riscv, s390, and powerpc.
 
 This works by hooking into vmalloc and vmap and dynamically
 allocating real shadow memory to back the mappings.
@@ -406,19 +467,18 @@ generic ``noinstr`` one.
 Note that disabling compiler instrumentation (either on a per-file or a
 per-function basis) makes KASAN ignore the accesses that happen directly in
 that code for software KASAN modes. It does not help when the accesses happen
-indirectly (through calls to instrumented functions) or with the hardware
-tag-based mode that does not use compiler instrumentation.
+indirectly (through calls to instrumented functions) or with Hardware
+Tag-Based KASAN, which does not use compiler instrumentation.
 
 For software KASAN modes, to disable KASAN reports in a part of the kernel code
 for the current task, annotate this part of the code with a
 ``kasan_disable_current()``/``kasan_enable_current()`` section. This also
 disables the reports for indirect accesses that happen through function calls.
 
-For tag-based KASAN modes (include the hardware one), to disable access
-checking, use ``kasan_reset_tag()`` or ``page_kasan_tag_reset()``. Note that
-temporarily disabling access checking via ``page_kasan_tag_reset()`` requires
-saving and restoring the per-page KASAN tag via
-``page_kasan_tag``/``page_kasan_tag_set``.
+For tag-based KASAN modes, to disable access checking, use
+``kasan_reset_tag()`` or ``page_kasan_tag_reset()``. Note that temporarily
+disabling access checking via ``page_kasan_tag_reset()`` requires saving and
+restoring the per-page KASAN tag via ``page_kasan_tag``/``page_kasan_tag_set``.
 
 Tests
 ~~~~~
diff --git a/Documentation/dev-tools/kcov.rst b/Documentation/dev-tools/kcov.rst
index d2c4c27e1702..6611434e2dd2 100644
--- a/Documentation/dev-tools/kcov.rst
+++ b/Documentation/dev-tools/kcov.rst
@@ -1,42 +1,50 @@
-kcov: code coverage for fuzzing
+KCOV: code coverage for fuzzing
 ===============================
 
-kcov exposes kernel code coverage information in a form suitable for coverage-
-guided fuzzing (randomized testing). Coverage data of a running kernel is
-exported via the "kcov" debugfs file. Coverage collection is enabled on a task
-basis, and thus it can capture precise coverage of a single system call.
+KCOV collects and exposes kernel code coverage information in a form suitable
+for coverage-guided fuzzing. Coverage data of a running kernel is exported via
+the ``kcov`` debugfs file. Coverage collection is enabled on a task basis, and
+thus KCOV can capture precise coverage of a single system call.
 
-Note that kcov does not aim to collect as much coverage as possible. It aims
-to collect more or less stable coverage that is function of syscall inputs.
-To achieve this goal it does not collect coverage in soft/hard interrupts
-and instrumentation of some inherently non-deterministic parts of kernel is
-disabled (e.g. scheduler, locking).
+Note that KCOV does not aim to collect as much coverage as possible. It aims
+to collect more or less stable coverage that is a function of syscall inputs.
+To achieve this goal, it does not collect coverage in soft/hard interrupts
+(unless remove coverage collection is enabled, see below) and from some
+inherently non-deterministic parts of the kernel (e.g. scheduler, locking).
 
-kcov is also able to collect comparison operands from the instrumented code
-(this feature currently requires that the kernel is compiled with clang).
+Besides collecting code coverage, KCOV can also collect comparison operands.
+See the "Comparison operands collection" section for details.
+
+Besides collecting coverage data from syscall handlers, KCOV can also collect
+coverage for annotated parts of the kernel executing in background kernel
+tasks or soft interrupts. See the "Remote coverage collection" section for
+details.
 
 Prerequisites
 -------------
 
-Configure the kernel with::
+KCOV relies on compiler instrumentation and requires GCC 6.1.0 or later
+or any Clang version supported by the kernel.
 
-        CONFIG_KCOV=y
+Collecting comparison operands is supported with GCC 8+ or with Clang.
+
+To enable KCOV, configure the kernel with::
 
-CONFIG_KCOV requires gcc 6.1.0 or later.
+        CONFIG_KCOV=y
 
-If the comparison operands need to be collected, set::
+To enable comparison operands collection, set::
 
 	CONFIG_KCOV_ENABLE_COMPARISONS=y
 
-Profiling data will only become accessible once debugfs has been mounted::
+Coverage data only becomes accessible once debugfs has been mounted::
 
         mount -t debugfs none /sys/kernel/debug
 
 Coverage collection
 -------------------
 
-The following program demonstrates coverage collection from within a test
-program using kcov:
+The following program demonstrates how to use KCOV to collect coverage for a
+single syscall from within a test program:
 
 .. code-block:: c
 
@@ -50,6 +58,7 @@ program using kcov:
     #include <sys/mman.h>
     #include <unistd.h>
     #include <fcntl.h>
+    #include <linux/types.h>
 
     #define KCOV_INIT_TRACE			_IOR('c', 1, unsigned long)
     #define KCOV_ENABLE			_IO('c', 100)
@@ -83,7 +92,7 @@ program using kcov:
 		perror("ioctl"), exit(1);
 	/* Reset coverage from the tail of the ioctl() call. */
 	__atomic_store_n(&cover[0], 0, __ATOMIC_RELAXED);
-	/* That's the target syscal call. */
+	/* Call the target syscall call. */
 	read(-1, NULL, 0);
 	/* Read number of PCs collected. */
 	n = __atomic_load_n(&cover[0], __ATOMIC_RELAXED);
@@ -102,7 +111,7 @@ program using kcov:
 	return 0;
     }
 
-After piping through addr2line output of the program looks as follows::
+After piping through ``addr2line`` the output of the program looks as follows::
 
     SyS_read
     fs/read_write.c:562
@@ -120,12 +129,13 @@ After piping through addr2line output of the program looks as follows::
     fs/read_write.c:562
 
 If a program needs to collect coverage from several threads (independently),
-it needs to open /sys/kernel/debug/kcov in each thread separately.
+it needs to open ``/sys/kernel/debug/kcov`` in each thread separately.
 
 The interface is fine-grained to allow efficient forking of test processes.
-That is, a parent process opens /sys/kernel/debug/kcov, enables trace mode,
-mmaps coverage buffer and then forks child processes in a loop. Child processes
-only need to enable coverage (disable happens automatically on thread end).
+That is, a parent process opens ``/sys/kernel/debug/kcov``, enables trace mode,
+mmaps coverage buffer, and then forks child processes in a loop. The child
+processes only need to enable coverage (it gets disabled automatically when
+a thread exits).
 
 Comparison operands collection
 ------------------------------
@@ -177,6 +187,8 @@ Comparison operands collection is similar to coverage collection:
 	/* Read number of comparisons collected. */
 	n = __atomic_load_n(&cover[0], __ATOMIC_RELAXED);
 	for (i = 0; i < n; i++) {
+		uint64_t ip;
+
 		type = cover[i * KCOV_WORDS_PER_CMP + 1];
 		/* arg1 and arg2 - operands of the comparison. */
 		arg1 = cover[i * KCOV_WORDS_PER_CMP + 2];
@@ -202,55 +214,83 @@ Comparison operands collection is similar to coverage collection:
 	return 0;
     }
 
-Note that the kcov modes (coverage collection or comparison operands) are
-mutually exclusive.
+Note that the KCOV modes (collection of code coverage or comparison operands)
+are mutually exclusive.
 
 Remote coverage collection
 --------------------------
 
-With KCOV_ENABLE coverage is collected only for syscalls that are issued
-from the current process. With KCOV_REMOTE_ENABLE it's possible to collect
-coverage for arbitrary parts of the kernel code, provided that those parts
-are annotated with kcov_remote_start()/kcov_remote_stop().
-
-This allows to collect coverage from two types of kernel background
-threads: the global ones, that are spawned during kernel boot in a limited
-number of instances (e.g. one USB hub_event() worker thread is spawned per
-USB HCD); and the local ones, that are spawned when a user interacts with
-some kernel interface (e.g. vhost workers); as well as from soft
-interrupts.
-
-To enable collecting coverage from a global background thread or from a
-softirq, a unique global handle must be assigned and passed to the
-corresponding kcov_remote_start() call. Then a userspace process can pass
-a list of such handles to the KCOV_REMOTE_ENABLE ioctl in the handles
-array field of the kcov_remote_arg struct. This will attach the used kcov
-device to the code sections, that are referenced by those handles.
-
-Since there might be many local background threads spawned from different
-userspace processes, we can't use a single global handle per annotation.
-Instead, the userspace process passes a non-zero handle through the
-common_handle field of the kcov_remote_arg struct. This common handle gets
-saved to the kcov_handle field in the current task_struct and needs to be
-passed to the newly spawned threads via custom annotations. Those threads
-should in turn be annotated with kcov_remote_start()/kcov_remote_stop().
-
-Internally kcov stores handles as u64 integers. The top byte of a handle
-is used to denote the id of a subsystem that this handle belongs to, and
-the lower 4 bytes are used to denote the id of a thread instance within
-that subsystem. A reserved value 0 is used as a subsystem id for common
-handles as they don't belong to a particular subsystem. The bytes 4-7 are
-currently reserved and must be zero. In the future the number of bytes
-used for the subsystem or handle ids might be increased.
-
-When a particular userspace process collects coverage via a common
-handle, kcov will collect coverage for each code section that is annotated
-to use the common handle obtained as kcov_handle from the current
-task_struct. However non common handles allow to collect coverage
-selectively from different subsystems.
+Besides collecting coverage data from handlers of syscalls issued from a
+userspace process, KCOV can also collect coverage for parts of the kernel
+executing in other contexts - so-called "remote" coverage.
+
+Using KCOV to collect remote coverage requires:
+
+1. Modifying kernel code to annotate the code section from where coverage
+   should be collected with ``kcov_remote_start`` and ``kcov_remote_stop``.
+
+2. Using ``KCOV_REMOTE_ENABLE`` instead of ``KCOV_ENABLE`` in the userspace
+   process that collects coverage.
+
+Both ``kcov_remote_start`` and ``kcov_remote_stop`` annotations and the
+``KCOV_REMOTE_ENABLE`` ioctl accept handles that identify particular coverage
+collection sections. The way a handle is used depends on the context where the
+matching code section executes.
+
+KCOV supports collecting remote coverage from the following contexts:
+
+1. Global kernel background tasks. These are the tasks that are spawned during
+   kernel boot in a limited number of instances (e.g. one USB ``hub_event``
+   worker is spawned per one USB HCD).
+
+2. Local kernel background tasks. These are spawned when a userspace process
+   interacts with some kernel interface and are usually killed when the process
+   exits (e.g. vhost workers).
+
+3. Soft interrupts.
+
+For #1 and #3, a unique global handle must be chosen and passed to the
+corresponding ``kcov_remote_start`` call. Then a userspace process must pass
+this handle to ``KCOV_REMOTE_ENABLE`` in the ``handles`` array field of the
+``kcov_remote_arg`` struct. This will attach the used KCOV device to the code
+section referenced by this handle. Multiple global handles identifying
+different code sections can be passed at once.
+
+For #2, the userspace process instead must pass a non-zero handle through the
+``common_handle`` field of the ``kcov_remote_arg`` struct. This common handle
+gets saved to the ``kcov_handle`` field in the current ``task_struct`` and
+needs to be passed to the newly spawned local tasks via custom kernel code
+modifications. Those tasks should in turn use the passed handle in their
+``kcov_remote_start`` and ``kcov_remote_stop`` annotations.
+
+KCOV follows a predefined format for both global and common handles. Each
+handle is a ``u64`` integer. Currently, only the one top and the lower 4 bytes
+are used. Bytes 4-7 are reserved and must be zero.
+
+For global handles, the top byte of the handle denotes the id of a subsystem
+this handle belongs to. For example, KCOV uses ``1`` as the USB subsystem id.
+The lower 4 bytes of a global handle denote the id of a task instance within
+that subsystem. For example, each ``hub_event`` worker uses the USB bus number
+as the task instance id.
+
+For common handles, a reserved value ``0`` is used as a subsystem id, as such
+handles don't belong to a particular subsystem. The lower 4 bytes of a common
+handle identify a collective instance of all local tasks spawned by the
+userspace process that passed a common handle to ``KCOV_REMOTE_ENABLE``.
+
+In practice, any value can be used for common handle instance id if coverage
+is only collected from a single userspace process on the system. However, if
+common handles are used by multiple processes, unique instance ids must be
+used for each process. One option is to use the process id as the common
+handle instance id.
+
+The following program demonstrates using KCOV to collect coverage from both
+local tasks spawned by the process and the global task that handles USB bus #1:
 
 .. code-block:: c
 
+    /* Same includes and defines as above. */
+
     struct kcov_remote_arg {
 	__u32		trace_mode;
 	__u32		area_size;
diff --git a/Documentation/dev-tools/kcsan.rst b/Documentation/dev-tools/kcsan.rst
index 7db43c7c09b8..3ae866dcc924 100644
--- a/Documentation/dev-tools/kcsan.rst
+++ b/Documentation/dev-tools/kcsan.rst
@@ -204,17 +204,17 @@ Ultimately this allows to determine the possible executions of concurrent code,
 and if that code is free from data races.
 
 KCSAN is aware of *marked atomic operations* (``READ_ONCE``, ``WRITE_ONCE``,
-``atomic_*``, etc.), but is oblivious of any ordering guarantees and simply
-assumes that memory barriers are placed correctly. In other words, KCSAN
-assumes that as long as a plain access is not observed to race with another
-conflicting access, memory operations are correctly ordered.
-
-This means that KCSAN will not report *potential* data races due to missing
-memory ordering. Developers should therefore carefully consider the required
-memory ordering requirements that remain unchecked. If, however, missing
-memory ordering (that is observable with a particular compiler and
-architecture) leads to an observable data race (e.g. entering a critical
-section erroneously), KCSAN would report the resulting data race.
+``atomic_*``, etc.), and a subset of ordering guarantees implied by memory
+barriers. With ``CONFIG_KCSAN_WEAK_MEMORY=y``, KCSAN models load or store
+buffering, and can detect missing ``smp_mb()``, ``smp_wmb()``, ``smp_rmb()``,
+``smp_store_release()``, and all ``atomic_*`` operations with equivalent
+implied barriers.
+
+Note, KCSAN will not report all data races due to missing memory ordering,
+specifically where a memory barrier would be required to prohibit subsequent
+memory operation from reordering before the barrier. Developers should
+therefore carefully consider the required memory ordering requirements that
+remain unchecked.
 
 Race Detection Beyond Data Races
 --------------------------------
@@ -268,6 +268,56 @@ marked operations, if all accesses to a variable that is accessed concurrently
 are properly marked, KCSAN will never trigger a watchpoint and therefore never
 report the accesses.
 
+Modeling Weak Memory
+~~~~~~~~~~~~~~~~~~~~
+
+KCSAN's approach to detecting data races due to missing memory barriers is
+based on modeling access reordering (with ``CONFIG_KCSAN_WEAK_MEMORY=y``).
+Each plain memory access for which a watchpoint is set up, is also selected for
+simulated reordering within the scope of its function (at most 1 in-flight
+access).
+
+Once an access has been selected for reordering, it is checked along every
+other access until the end of the function scope. If an appropriate memory
+barrier is encountered, the access will no longer be considered for simulated
+reordering.
+
+When the result of a memory operation should be ordered by a barrier, KCSAN can
+then detect data races where the conflict only occurs as a result of a missing
+barrier. Consider the example::
+
+    int x, flag;
+    void T1(void)
+    {
+        x = 1;                  // data race!
+        WRITE_ONCE(flag, 1);    // correct: smp_store_release(&flag, 1)
+    }
+    void T2(void)
+    {
+        while (!READ_ONCE(flag));   // correct: smp_load_acquire(&flag)
+        ... = x;                    // data race!
+    }
+
+When weak memory modeling is enabled, KCSAN can consider ``x`` in ``T1`` for
+simulated reordering. After the write of ``flag``, ``x`` is again checked for
+concurrent accesses: because ``T2`` is able to proceed after the write of
+``flag``, a data race is detected. With the correct barriers in place, ``x``
+would not be considered for reordering after the proper release of ``flag``,
+and no data race would be detected.
+
+Deliberate trade-offs in complexity but also practical limitations mean only a
+subset of data races due to missing memory barriers can be detected. With
+currently available compiler support, the implementation is limited to modeling
+the effects of "buffering" (delaying accesses), since the runtime cannot
+"prefetch" accesses. Also recall that watchpoints are only set up for plain
+accesses, and the only access type for which KCSAN simulates reordering. This
+means reordering of marked accesses is not modeled.
+
+A consequence of the above is that acquire operations do not require barrier
+instrumentation (no prefetching). Furthermore, marked accesses introducing
+address or control dependencies do not require special handling (the marked
+access cannot be reordered, later dependent accesses cannot be prefetched).
+
 Key Properties
 ~~~~~~~~~~~~~~
 
@@ -290,8 +340,8 @@ Key Properties
 4. **Detects Racy Writes from Devices:** Due to checking data values upon
    setting up watchpoints, racy writes from devices can also be detected.
 
-5. **Memory Ordering:** KCSAN is *not* explicitly aware of the LKMM's ordering
-   rules; this may result in missed data races (false negatives).
+5. **Memory Ordering:** KCSAN is aware of only a subset of LKMM ordering rules;
+   this may result in missed data races (false negatives).
 
 6. **Analysis Accuracy:** For observed executions, due to using a sampling
    strategy, the analysis is *unsound* (false negatives possible), but aims to
diff --git a/Documentation/dev-tools/kfence.rst b/Documentation/dev-tools/kfence.rst
index ac6b89d1a8c3..936f6aaa75c8 100644
--- a/Documentation/dev-tools/kfence.rst
+++ b/Documentation/dev-tools/kfence.rst
@@ -41,6 +41,18 @@ guarded by KFENCE. The default is configurable via the Kconfig option
 ``CONFIG_KFENCE_SAMPLE_INTERVAL``. Setting ``kfence.sample_interval=0``
 disables KFENCE.
 
+The sample interval controls a timer that sets up KFENCE allocations. By
+default, to keep the real sample interval predictable, the normal timer also
+causes CPU wake-ups when the system is completely idle. This may be undesirable
+on power-constrained systems. The boot parameter ``kfence.deferrable=1``
+instead switches to a "deferrable" timer which does not force CPU wake-ups on
+idle systems, at the risk of unpredictable sample intervals. The default is
+configurable via the Kconfig option ``CONFIG_KFENCE_DEFERRABLE``.
+
+.. warning::
+   The KUnit test suite is very likely to fail when using a deferrable timer
+   since it currently causes very unpredictable sample intervals.
+
 The KFENCE memory pool is of fixed size, and if the pool is exhausted, no
 further KFENCE allocations occur. With ``CONFIG_KFENCE_NUM_OBJECTS`` (default
 255), the number of available guarded objects can be controlled. Each object
diff --git a/Documentation/dev-tools/kgdb.rst b/Documentation/dev-tools/kgdb.rst
index 43456244651a..f83ba2601e55 100644
--- a/Documentation/dev-tools/kgdb.rst
+++ b/Documentation/dev-tools/kgdb.rst
@@ -402,7 +402,7 @@ This is a quick example of how to use kdb.
 2. Enter the kernel debugger manually or by waiting for an oops or
    fault. There are several ways you can enter the kernel debugger
    manually; all involve using the :kbd:`SysRq-G`, which means you must have
-   enabled ``CONFIG_MAGIC_SysRq=y`` in your kernel config.
+   enabled ``CONFIG_MAGIC_SYSRQ=y`` in your kernel config.
 
    -  When logged in as root or with a super user session you can run::
 
@@ -461,7 +461,7 @@ This is a quick example of how to use kdb with a keyboard.
 2. Enter the kernel debugger manually or by waiting for an oops or
    fault. There are several ways you can enter the kernel debugger
    manually; all involve using the :kbd:`SysRq-G`, which means you must have
-   enabled ``CONFIG_MAGIC_SysRq=y`` in your kernel config.
+   enabled ``CONFIG_MAGIC_SYSRQ=y`` in your kernel config.
 
    -  When logged in as root or with a super user session you can run::
 
@@ -557,7 +557,7 @@ Connecting with gdb to a serial port
    Example (using a directly connected port)::
 
            % gdb ./vmlinux
-           (gdb) set remotebaud 115200
+           (gdb) set serial baud 115200
            (gdb) target remote /dev/ttyS0
 
 
diff --git a/Documentation/dev-tools/kmemleak.rst b/Documentation/dev-tools/kmemleak.rst
index 1c935f41cd3a..2cb00b53339f 100644
--- a/Documentation/dev-tools/kmemleak.rst
+++ b/Documentation/dev-tools/kmemleak.rst
@@ -174,7 +174,6 @@ mapping:
 
 - ``kmemleak_alloc_phys``
 - ``kmemleak_free_part_phys``
-- ``kmemleak_not_leak_phys``
 - ``kmemleak_ignore_phys``
 
 Dealing with false positives/negatives
@@ -228,7 +227,7 @@ Testing with kmemleak-test
 --------------------------
 
 To check if you have all set up to use kmemleak, you can use the kmemleak-test
-module, a module that deliberately leaks memory. Set CONFIG_DEBUG_KMEMLEAK_TEST
+module, a module that deliberately leaks memory. Set CONFIG_SAMPLE_KMEMLEAK
 as module (it can't be used as built-in) and boot the kernel with kmemleak
 enabled. Load the module and perform a scan with::
 
diff --git a/Documentation/dev-tools/kmsan.rst b/Documentation/dev-tools/kmsan.rst
new file mode 100644
index 000000000000..55fa82212eb2
--- /dev/null
+++ b/Documentation/dev-tools/kmsan.rst
@@ -0,0 +1,428 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. Copyright (C) 2022, Google LLC.
+
+===================================
+The Kernel Memory Sanitizer (KMSAN)
+===================================
+
+KMSAN is a dynamic error detector aimed at finding uses of uninitialized
+values. It is based on compiler instrumentation, and is quite similar to the
+userspace `MemorySanitizer tool`_.
+
+An important note is that KMSAN is not intended for production use, because it
+drastically increases kernel memory footprint and slows the whole system down.
+
+Usage
+=====
+
+Building the kernel
+-------------------
+
+In order to build a kernel with KMSAN you will need a fresh Clang (14.0.6+).
+Please refer to `LLVM documentation`_ for the instructions on how to build Clang.
+
+Now configure and build the kernel with CONFIG_KMSAN enabled.
+
+Example report
+--------------
+
+Here is an example of a KMSAN report::
+
+  =====================================================
+  BUG: KMSAN: uninit-value in test_uninit_kmsan_check_memory+0x1be/0x380 [kmsan_test]
+   test_uninit_kmsan_check_memory+0x1be/0x380 mm/kmsan/kmsan_test.c:273
+   kunit_run_case_internal lib/kunit/test.c:333
+   kunit_try_run_case+0x206/0x420 lib/kunit/test.c:374
+   kunit_generic_run_threadfn_adapter+0x6d/0xc0 lib/kunit/try-catch.c:28
+   kthread+0x721/0x850 kernel/kthread.c:327
+   ret_from_fork+0x1f/0x30 ??:?
+
+  Uninit was stored to memory at:
+   do_uninit_local_array+0xfa/0x110 mm/kmsan/kmsan_test.c:260
+   test_uninit_kmsan_check_memory+0x1a2/0x380 mm/kmsan/kmsan_test.c:271
+   kunit_run_case_internal lib/kunit/test.c:333
+   kunit_try_run_case+0x206/0x420 lib/kunit/test.c:374
+   kunit_generic_run_threadfn_adapter+0x6d/0xc0 lib/kunit/try-catch.c:28
+   kthread+0x721/0x850 kernel/kthread.c:327
+   ret_from_fork+0x1f/0x30 ??:?
+
+  Local variable uninit created at:
+   do_uninit_local_array+0x4a/0x110 mm/kmsan/kmsan_test.c:256
+   test_uninit_kmsan_check_memory+0x1a2/0x380 mm/kmsan/kmsan_test.c:271
+
+  Bytes 4-7 of 8 are uninitialized
+  Memory access of size 8 starts at ffff888083fe3da0
+
+  CPU: 0 PID: 6731 Comm: kunit_try_catch Tainted: G    B       E     5.16.0-rc3+ #104
+  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
+  =====================================================
+
+The report says that the local variable ``uninit`` was created uninitialized in
+``do_uninit_local_array()``. The third stack trace corresponds to the place
+where this variable was created.
+
+The first stack trace shows where the uninit value was used (in
+``test_uninit_kmsan_check_memory()``). The tool shows the bytes which were left
+uninitialized in the local variable, as well as the stack where the value was
+copied to another memory location before use.
+
+A use of uninitialized value ``v`` is reported by KMSAN in the following cases:
+
+ - in a condition, e.g. ``if (v) { ... }``;
+ - in an indexing or pointer dereferencing, e.g. ``array[v]`` or ``*v``;
+ - when it is copied to userspace or hardware, e.g. ``copy_to_user(..., &v, ...)``;
+ - when it is passed as an argument to a function, and
+   ``CONFIG_KMSAN_CHECK_PARAM_RETVAL`` is enabled (see below).
+
+The mentioned cases (apart from copying data to userspace or hardware, which is
+a security issue) are considered undefined behavior from the C11 Standard point
+of view.
+
+Disabling the instrumentation
+-----------------------------
+
+A function can be marked with ``__no_kmsan_checks``. Doing so makes KMSAN
+ignore uninitialized values in that function and mark its output as initialized.
+As a result, the user will not get KMSAN reports related to that function.
+
+Another function attribute supported by KMSAN is ``__no_sanitize_memory``.
+Applying this attribute to a function will result in KMSAN not instrumenting
+it, which can be helpful if we do not want the compiler to interfere with some
+low-level code (e.g. that marked with ``noinstr`` which implicitly adds
+``__no_sanitize_memory``).
+
+This however comes at a cost: stack allocations from such functions will have
+incorrect shadow/origin values, likely leading to false positives. Functions
+called from non-instrumented code may also receive incorrect metadata for their
+parameters.
+
+As a rule of thumb, avoid using ``__no_sanitize_memory`` explicitly.
+
+It is also possible to disable KMSAN for a single file (e.g. main.o)::
+
+  KMSAN_SANITIZE_main.o := n
+
+or for the whole directory::
+
+  KMSAN_SANITIZE := n
+
+in the Makefile. Think of this as applying ``__no_sanitize_memory`` to every
+function in the file or directory. Most users won't need KMSAN_SANITIZE, unless
+their code gets broken by KMSAN (e.g. runs at early boot time).
+
+Support
+=======
+
+In order for KMSAN to work the kernel must be built with Clang, which so far is
+the only compiler that has KMSAN support. The kernel instrumentation pass is
+based on the userspace `MemorySanitizer tool`_.
+
+The runtime library only supports x86_64 at the moment.
+
+How KMSAN works
+===============
+
+KMSAN shadow memory
+-------------------
+
+KMSAN associates a metadata byte (also called shadow byte) with every byte of
+kernel memory. A bit in the shadow byte is set iff the corresponding bit of the
+kernel memory byte is uninitialized. Marking the memory uninitialized (i.e.
+setting its shadow bytes to ``0xff``) is called poisoning, marking it
+initialized (setting the shadow bytes to ``0x00``) is called unpoisoning.
+
+When a new variable is allocated on the stack, it is poisoned by default by
+instrumentation code inserted by the compiler (unless it is a stack variable
+that is immediately initialized). Any new heap allocation done without
+``__GFP_ZERO`` is also poisoned.
+
+Compiler instrumentation also tracks the shadow values as they are used along
+the code. When needed, instrumentation code invokes the runtime library in
+``mm/kmsan/`` to persist shadow values.
+
+The shadow value of a basic or compound type is an array of bytes of the same
+length. When a constant value is written into memory, that memory is unpoisoned.
+When a value is read from memory, its shadow memory is also obtained and
+propagated into all the operations which use that value. For every instruction
+that takes one or more values the compiler generates code that calculates the
+shadow of the result depending on those values and their shadows.
+
+Example::
+
+  int a = 0xff;  // i.e. 0x000000ff
+  int b;
+  int c = a | b;
+
+In this case the shadow of ``a`` is ``0``, shadow of ``b`` is ``0xffffffff``,
+shadow of ``c`` is ``0xffffff00``. This means that the upper three bytes of
+``c`` are uninitialized, while the lower byte is initialized.
+
+Origin tracking
+---------------
+
+Every four bytes of kernel memory also have a so-called origin mapped to them.
+This origin describes the point in program execution at which the uninitialized
+value was created. Every origin is associated with either the full allocation
+stack (for heap-allocated memory), or the function containing the uninitialized
+variable (for locals).
+
+When an uninitialized variable is allocated on stack or heap, a new origin
+value is created, and that variable's origin is filled with that value. When a
+value is read from memory, its origin is also read and kept together with the
+shadow. For every instruction that takes one or more values, the origin of the
+result is one of the origins corresponding to any of the uninitialized inputs.
+If a poisoned value is written into memory, its origin is written to the
+corresponding storage as well.
+
+Example 1::
+
+  int a = 42;
+  int b;
+  int c = a + b;
+
+In this case the origin of ``b`` is generated upon function entry, and is
+stored to the origin of ``c`` right before the addition result is written into
+memory.
+
+Several variables may share the same origin address, if they are stored in the
+same four-byte chunk. In this case every write to either variable updates the
+origin for all of them. We have to sacrifice precision in this case, because
+storing origins for individual bits (and even bytes) would be too costly.
+
+Example 2::
+
+  int combine(short a, short b) {
+    union ret_t {
+      int i;
+      short s[2];
+    } ret;
+    ret.s[0] = a;
+    ret.s[1] = b;
+    return ret.i;
+  }
+
+If ``a`` is initialized and ``b`` is not, the shadow of the result would be
+0xffff0000, and the origin of the result would be the origin of ``b``.
+``ret.s[0]`` would have the same origin, but it will never be used, because
+that variable is initialized.
+
+If both function arguments are uninitialized, only the origin of the second
+argument is preserved.
+
+Origin chaining
+~~~~~~~~~~~~~~~
+
+To ease debugging, KMSAN creates a new origin for every store of an
+uninitialized value to memory. The new origin references both its creation stack
+and the previous origin the value had. This may cause increased memory
+consumption, so we limit the length of origin chains in the runtime.
+
+Clang instrumentation API
+-------------------------
+
+Clang instrumentation pass inserts calls to functions defined in
+``mm/kmsan/nstrumentation.c`` into the kernel code.
+
+Shadow manipulation
+~~~~~~~~~~~~~~~~~~~
+
+For every memory access the compiler emits a call to a function that returns a
+pair of pointers to the shadow and origin addresses of the given memory::
+
+  typedef struct {
+    void *shadow, *origin;
+  } shadow_origin_ptr_t
+
+  shadow_origin_ptr_t __msan_metadata_ptr_for_load_{1,2,4,8}(void *addr)
+  shadow_origin_ptr_t __msan_metadata_ptr_for_store_{1,2,4,8}(void *addr)
+  shadow_origin_ptr_t __msan_metadata_ptr_for_load_n(void *addr, uintptr_t size)
+  shadow_origin_ptr_t __msan_metadata_ptr_for_store_n(void *addr, uintptr_t size)
+
+The function name depends on the memory access size.
+
+The compiler makes sure that for every loaded value its shadow and origin
+values are read from memory. When a value is stored to memory, its shadow and
+origin are also stored using the metadata pointers.
+
+Handling locals
+~~~~~~~~~~~~~~~
+
+A special function is used to create a new origin value for a local variable and
+set the origin of that variable to that value::
+
+  void __msan_poison_alloca(void *addr, uintptr_t size, char *descr)
+
+Access to per-task data
+~~~~~~~~~~~~~~~~~~~~~~~
+
+At the beginning of every instrumented function KMSAN inserts a call to
+``__msan_get_context_state()``::
+
+  kmsan_context_state *__msan_get_context_state(void)
+
+``kmsan_context_state`` is declared in ``include/linux/kmsan.h``::
+
+  struct kmsan_context_state {
+    char param_tls[KMSAN_PARAM_SIZE];
+    char retval_tls[KMSAN_RETVAL_SIZE];
+    char va_arg_tls[KMSAN_PARAM_SIZE];
+    char va_arg_origin_tls[KMSAN_PARAM_SIZE];
+    u64 va_arg_overflow_size_tls;
+    char param_origin_tls[KMSAN_PARAM_SIZE];
+    depot_stack_handle_t retval_origin_tls;
+  };
+
+This structure is used by KMSAN to pass parameter shadows and origins between
+instrumented functions (unless the parameters are checked immediately by
+``CONFIG_KMSAN_CHECK_PARAM_RETVAL``).
+
+Passing uninitialized values to functions
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Clang's MemorySanitizer instrumentation has an option,
+``-fsanitize-memory-param-retval``, which makes the compiler check function
+parameters passed by value, as well as function return values.
+
+The option is controlled by ``CONFIG_KMSAN_CHECK_PARAM_RETVAL``, which is
+enabled by default to let KMSAN report uninitialized values earlier.
+Please refer to the `LKML discussion`_ for more details.
+
+Because of the way the checks are implemented in LLVM (they are only applied to
+parameters marked as ``noundef``), not all parameters are guaranteed to be
+checked, so we cannot give up the metadata storage in ``kmsan_context_state``.
+
+String functions
+~~~~~~~~~~~~~~~~
+
+The compiler replaces calls to ``memcpy()``/``memmove()``/``memset()`` with the
+following functions. These functions are also called when data structures are
+initialized or copied, making sure shadow and origin values are copied alongside
+with the data::
+
+  void *__msan_memcpy(void *dst, void *src, uintptr_t n)
+  void *__msan_memmove(void *dst, void *src, uintptr_t n)
+  void *__msan_memset(void *dst, int c, uintptr_t n)
+
+Error reporting
+~~~~~~~~~~~~~~~
+
+For each use of a value the compiler emits a shadow check that calls
+``__msan_warning()`` in the case that value is poisoned::
+
+  void __msan_warning(u32 origin)
+
+``__msan_warning()`` causes KMSAN runtime to print an error report.
+
+Inline assembly instrumentation
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+KMSAN instruments every inline assembly output with a call to::
+
+  void __msan_instrument_asm_store(void *addr, uintptr_t size)
+
+, which unpoisons the memory region.
+
+This approach may mask certain errors, but it also helps to avoid a lot of
+false positives in bitwise operations, atomics etc.
+
+Sometimes the pointers passed into inline assembly do not point to valid memory.
+In such cases they are ignored at runtime.
+
+
+Runtime library
+---------------
+
+The code is located in ``mm/kmsan/``.
+
+Per-task KMSAN state
+~~~~~~~~~~~~~~~~~~~~
+
+Every task_struct has an associated KMSAN task state that holds the KMSAN
+context (see above) and a per-task flag disallowing KMSAN reports::
+
+  struct kmsan_context {
+    ...
+    bool allow_reporting;
+    struct kmsan_context_state cstate;
+    ...
+  }
+
+  struct task_struct {
+    ...
+    struct kmsan_context kmsan;
+    ...
+  }
+
+KMSAN contexts
+~~~~~~~~~~~~~~
+
+When running in a kernel task context, KMSAN uses ``current->kmsan.cstate`` to
+hold the metadata for function parameters and return values.
+
+But in the case the kernel is running in the interrupt, softirq or NMI context,
+where ``current`` is unavailable, KMSAN switches to per-cpu interrupt state::
+
+  DEFINE_PER_CPU(struct kmsan_ctx, kmsan_percpu_ctx);
+
+Metadata allocation
+~~~~~~~~~~~~~~~~~~~
+
+There are several places in the kernel for which the metadata is stored.
+
+1. Each ``struct page`` instance contains two pointers to its shadow and
+origin pages::
+
+  struct page {
+    ...
+    struct page *shadow, *origin;
+    ...
+  };
+
+At boot-time, the kernel allocates shadow and origin pages for every available
+kernel page. This is done quite late, when the kernel address space is already
+fragmented, so normal data pages may arbitrarily interleave with the metadata
+pages.
+
+This means that in general for two contiguous memory pages their shadow/origin
+pages may not be contiguous. Consequently, if a memory access crosses the
+boundary of a memory block, accesses to shadow/origin memory may potentially
+corrupt other pages or read incorrect values from them.
+
+In practice, contiguous memory pages returned by the same ``alloc_pages()``
+call will have contiguous metadata, whereas if these pages belong to two
+different allocations their metadata pages can be fragmented.
+
+For the kernel data (``.data``, ``.bss`` etc.) and percpu memory regions
+there also are no guarantees on metadata contiguity.
+
+In the case ``__msan_metadata_ptr_for_XXX_YYY()`` hits the border between two
+pages with non-contiguous metadata, it returns pointers to fake shadow/origin regions::
+
+  char dummy_load_page[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
+  char dummy_store_page[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));
+
+``dummy_load_page`` is zero-initialized, so reads from it always yield zeroes.
+All stores to ``dummy_store_page`` are ignored.
+
+2. For vmalloc memory and modules, there is a direct mapping between the memory
+range, its shadow and origin. KMSAN reduces the vmalloc area by 3/4, making only
+the first quarter available to ``vmalloc()``. The second quarter of the vmalloc
+area contains shadow memory for the first quarter, the third one holds the
+origins. A small part of the fourth quarter contains shadow and origins for the
+kernel modules. Please refer to ``arch/x86/include/asm/pgtable_64_types.h`` for
+more details.
+
+When an array of pages is mapped into a contiguous virtual memory space, their
+shadow and origin pages are similarly mapped into contiguous regions.
+
+References
+==========
+
+E. Stepanov, K. Serebryany. `MemorySanitizer: fast detector of uninitialized
+memory use in C++
+<https://static.googleusercontent.com/media/research.google.com/en//pubs/archive/43308.pdf>`_.
+In Proceedings of CGO 2015.
+
+.. _MemorySanitizer tool: https://clang.llvm.org/docs/MemorySanitizer.html
+.. _LLVM documentation: https://llvm.org/docs/GettingStarted.html
+.. _LKML discussion: https://lore.kernel.org/all/20220614144853.3693273-1-glider@google.com/
diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst
index dcefee707ccd..12b575b76b20 100644
--- a/Documentation/dev-tools/kselftest.rst
+++ b/Documentation/dev-tools/kselftest.rst
@@ -7,6 +7,14 @@ directory. These are intended to be small tests to exercise individual code
 paths in the kernel. Tests are intended to be run after building, installing
 and booting a kernel.
 
+Kselftest from mainline can be run on older stable kernels. Running tests
+from mainline offers the best coverage. Several test rings run mainline
+kselftest suite on stable releases. The reason is that when a new test
+gets added to test existing code to regression test a bug, we should be
+able to run that test on an older kernel. Hence, it is important to keep
+code that can still test an older kernel and make sure it skips the test
+gracefully on newer releases.
+
 You can find additional information on Kselftest framework, how to
 write new tests using the framework on Kselftest wiki:
 
@@ -200,6 +208,14 @@ In general, the rules for selftests are
 Contributing new tests (details)
 ================================
 
+ * In your Makefile, use facilities from lib.mk by including it instead of
+   reinventing the wheel. Specify flags and binaries generation flags on
+   need basis before including lib.mk. ::
+
+    CFLAGS = $(KHDR_INCLUDES)
+    TEST_GEN_PROGS := close_range_test
+    include ../lib.mk
+
  * Use TEST_GEN_XXX if such binaries or files are generated during
    compiling.
 
@@ -222,13 +238,30 @@ Contributing new tests (details)
  * First use the headers inside the kernel source and/or git repo, and then the
    system headers.  Headers for the kernel release as opposed to headers
    installed by the distro on the system should be the primary focus to be able
-   to find regressions.
+   to find regressions. Use KHDR_INCLUDES in Makefile to include headers from
+   the kernel source.
 
  * If a test needs specific kernel config options enabled, add a config file in
    the test directory to enable them.
 
    e.g: tools/testing/selftests/android/config
 
+ * Create a .gitignore file inside test directory and add all generated objects
+   in it.
+
+ * Add new test name in TARGETS in selftests/Makefile::
+
+    TARGETS += android
+
+ * All changes should pass::
+
+    kselftest-{all,install,clean,gen_tar}
+    kselftest-{all,install,clean,gen_tar} O=abo_path
+    kselftest-{all,install,clean,gen_tar} O=rel_path
+    make -C tools/testing/selftests {all,install,clean,gen_tar}
+    make -C tools/testing/selftests {all,install,clean,gen_tar} O=abs_path
+    make -C tools/testing/selftests {all,install,clean,gen_tar} O=rel_path
+
 Test Module
 ===========
 
@@ -242,6 +275,14 @@ assist writing kernel modules that are for use with kselftest:
 - ``tools/testing/selftests/kselftest_module.h``
 - ``tools/testing/selftests/kselftest/module.sh``
 
+Note that test modules should taint the kernel with TAINT_TEST. This will
+happen automatically for modules which are in the ``tools/testing/``
+directory, or for modules which use the ``kselftest_module.h`` header above.
+Otherwise, you'll need to add ``MODULE_INFO(test, "Y")`` to your module
+source. selftests which do not load modules typically should not taint the
+kernel, but in cases where a non-test module is loaded, TEST_TAINT can be
+applied from userspace by writing to ``/proc/sys/kernel/tainted``.
+
 How to use
 ----------
 
@@ -279,7 +320,7 @@ A bare bones test module might look like this:
 
    #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-   #include "../tools/testing/selftests/kselftest/module.h"
+   #include "../tools/testing/selftests/kselftest_module.h"
 
    KSTM_MODULE_GLOBALS();
 
@@ -300,6 +341,7 @@ A bare bones test module might look like this:
    KSTM_MODULE_LOADERS(test_foo);
    MODULE_AUTHOR("John Developer <jd@fooman.org>");
    MODULE_LICENSE("GPL");
+   MODULE_INFO(test, "Y");
 
 Example test script
 -------------------
diff --git a/Documentation/dev-tools/ktap.rst b/Documentation/dev-tools/ktap.rst
new file mode 100644
index 000000000000..414c105b10a9
--- /dev/null
+++ b/Documentation/dev-tools/ktap.rst
@@ -0,0 +1,311 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================================================
+The Kernel Test Anything Protocol (KTAP), version 1
+===================================================
+
+TAP, or the Test Anything Protocol is a format for specifying test results used
+by a number of projects. It's website and specification are found at this `link
+<https://testanything.org/>`_. The Linux Kernel largely uses TAP output for test
+results. However, Kernel testing frameworks have special needs for test results
+which don't align with the original TAP specification. Thus, a "Kernel TAP"
+(KTAP) format is specified to extend and alter TAP to support these use-cases.
+This specification describes the generally accepted format of KTAP as it is
+currently used in the kernel.
+
+KTAP test results describe a series of tests (which may be nested: i.e., test
+can have subtests), each of which can contain both diagnostic data -- e.g., log
+lines -- and a final result. The test structure and results are
+machine-readable, whereas the diagnostic data is unstructured and is there to
+aid human debugging.
+
+KTAP output is built from four different types of lines:
+- Version lines
+- Plan lines
+- Test case result lines
+- Diagnostic lines
+
+In general, valid KTAP output should also form valid TAP output, but some
+information, in particular nested test results, may be lost. Also note that
+there is a stagnant draft specification for TAP14, KTAP diverges from this in
+a couple of places (notably the "Subtest" header), which are described where
+relevant later in this document.
+
+Version lines
+-------------
+
+All KTAP-formatted results begin with a "version line" which specifies which
+version of the (K)TAP standard the result is compliant with.
+
+For example:
+- "KTAP version 1"
+- "TAP version 13"
+- "TAP version 14"
+
+Note that, in KTAP, subtests also begin with a version line, which denotes the
+start of the nested test results. This differs from TAP14, which uses a
+separate "Subtest" line.
+
+While, going forward, "KTAP version 1" should be used by compliant tests, it
+is expected that most parsers and other tooling will accept the other versions
+listed here for compatibility with existing tests and frameworks.
+
+Plan lines
+----------
+
+A test plan provides the number of tests (or subtests) in the KTAP output.
+
+Plan lines must follow the format of "1..N" where N is the number of tests or subtests.
+Plan lines follow version lines to indicate the number of nested tests.
+
+While there are cases where the number of tests is not known in advance -- in
+which case the test plan may be omitted -- it is strongly recommended one is
+present where possible.
+
+Test case result lines
+----------------------
+
+Test case result lines indicate the final status of a test.
+They are required and must have the format:
+
+.. code-block:: none
+
+	<result> <number> [<description>][ # [<directive>] [<diagnostic data>]]
+
+The result can be either "ok", which indicates the test case passed,
+or "not ok", which indicates that the test case failed.
+
+<number> represents the number of the test being performed. The first test must
+have the number 1 and the number then must increase by 1 for each additional
+subtest within the same test at the same nesting level.
+
+The description is a description of the test, generally the name of
+the test, and can be any string of characters other than # or a
+newline.  The description is optional, but recommended.
+
+The directive and any diagnostic data is optional. If either are present, they
+must follow a hash sign, "#".
+
+A directive is a keyword that indicates a different outcome for a test other
+than passed and failed. The directive is optional, and consists of a single
+keyword preceding the diagnostic data. In the event that a parser encounters
+a directive it doesn't support, it should fall back to the "ok" / "not ok"
+result.
+
+Currently accepted directives are:
+
+- "SKIP", which indicates a test was skipped (note the result of the test case
+  result line can be either "ok" or "not ok" if the SKIP directive is used)
+- "TODO", which indicates that a test is not expected to pass at the moment,
+  e.g. because the feature it is testing is known to be broken. While this
+  directive is inherited from TAP, its use in the kernel is discouraged.
+- "XFAIL", which indicates that a test is expected to fail. This is similar
+  to "TODO", above, and is used by some kselftest tests.
+- “TIMEOUT”, which indicates a test has timed out (note the result of the test
+  case result line should be “not ok” if the TIMEOUT directive is used)
+- “ERROR”, which indicates that the execution of a test has failed due to a
+  specific error that is included in the diagnostic data. (note the result of
+  the test case result line should be “not ok” if the ERROR directive is used)
+
+The diagnostic data is a plain-text field which contains any additional details
+about why this result was produced. This is typically an error message for ERROR
+or failed tests, or a description of missing dependencies for a SKIP result.
+
+The diagnostic data field is optional, and results which have neither a
+directive nor any diagnostic data do not need to include the "#" field
+separator.
+
+Example result lines include::
+
+	ok 1 test_case_name
+
+The test "test_case_name" passed.
+
+::
+
+	not ok 1 test_case_name
+
+The test "test_case_name" failed.
+
+::
+
+	ok 1 test # SKIP necessary dependency unavailable
+
+The test "test" was SKIPPED with the diagnostic message "necessary dependency
+unavailable".
+
+::
+
+	not ok 1 test # TIMEOUT 30 seconds
+
+The test "test" timed out, with diagnostic data "30 seconds".
+
+::
+
+	ok 5 check return code # rcode=0
+
+The test "check return code" passed, with additional diagnostic data “rcode=0”
+
+
+Diagnostic lines
+----------------
+
+If tests wish to output any further information, they should do so using
+"diagnostic lines". Diagnostic lines are optional, freeform text, and are
+often used to describe what is being tested and any intermediate results in
+more detail than the final result and diagnostic data line provides.
+
+Diagnostic lines are formatted as "# <diagnostic_description>", where the
+description can be any string.  Diagnostic lines can be anywhere in the test
+output. As a rule, diagnostic lines regarding a test are directly before the
+test result line for that test.
+
+Note that most tools will treat unknown lines (see below) as diagnostic lines,
+even if they do not start with a "#": this is to capture any other useful
+kernel output which may help debug the test. It is nevertheless recommended
+that tests always prefix any diagnostic output they have with a "#" character.
+
+Unknown lines
+-------------
+
+There may be lines within KTAP output that do not follow the format of one of
+the four formats for lines described above. This is allowed, however, they will
+not influence the status of the tests.
+
+This is an important difference from TAP.  Kernel tests may print messages
+to the system console or a log file.  Both of these destinations may contain
+messages either from unrelated kernel or userspace activity, or kernel
+messages from non-test code that is invoked by the test.  The kernel code
+invoked by the test likely is not aware that a test is in progress and
+thus can not print the message as a diagnostic message.
+
+Nested tests
+------------
+
+In KTAP, tests can be nested. This is done by having a test include within its
+output an entire set of KTAP-formatted results. This can be used to categorize
+and group related tests, or to split out different results from the same test.
+
+The "parent" test's result should consist of all of its subtests' results,
+starting with another KTAP version line and test plan, and end with the overall
+result. If one of the subtests fail, for example, the parent test should also
+fail.
+
+Additionally, all lines in a subtest should be indented. One level of
+indentation is two spaces: "  ". The indentation should begin at the version
+line and should end before the parent test's result line.
+
+"Unknown lines" are not considered to be lines in a subtest and thus are
+allowed to be either indented or not indented.
+
+An example of a test with two nested subtests:
+
+::
+
+	KTAP version 1
+	1..1
+	  KTAP version 1
+	  1..2
+	  ok 1 test_1
+	  not ok 2 test_2
+	# example failed
+	not ok 1 example
+
+An example format with multiple levels of nested testing:
+
+::
+
+	KTAP version 1
+	1..2
+	  KTAP version 1
+	  1..2
+	    KTAP version 1
+	    1..2
+	    not ok 1 test_1
+	    ok 2 test_2
+	  not ok 1 test_3
+	  ok 2 test_4 # SKIP
+	not ok 1 example_test_1
+	ok 2 example_test_2
+
+
+Major differences between TAP and KTAP
+--------------------------------------
+
+==================================================   =========  ===============
+Feature                                              TAP        KTAP
+==================================================   =========  ===============
+yaml and json in diagnosic message                   ok         not recommended
+TODO directive                                       ok         not recognized
+allows an arbitrary number of tests to be nested     no         yes
+"Unknown lines" are in category of "Anything else"   yes        no
+"Unknown lines" are                                  incorrect  allowed
+==================================================   =========  ===============
+
+The TAP14 specification does permit nested tests, but instead of using another
+nested version line, uses a line of the form
+"Subtest: <name>" where <name> is the name of the parent test.
+
+Example KTAP output
+--------------------
+::
+
+	KTAP version 1
+	1..1
+	  KTAP version 1
+	  1..3
+	    KTAP version 1
+	    1..1
+	    # test_1: initializing test_1
+	    ok 1 test_1
+	  ok 1 example_test_1
+	    KTAP version 1
+	    1..2
+	    ok 1 test_1 # SKIP test_1 skipped
+	    ok 2 test_2
+	  ok 2 example_test_2
+	    KTAP version 1
+	    1..3
+	    ok 1 test_1
+	    # test_2: FAIL
+	    not ok 2 test_2
+	    ok 3 test_3 # SKIP test_3 skipped
+	  not ok 3 example_test_3
+	not ok 1 main_test
+
+This output defines the following hierarchy:
+
+A single test called "main_test", which fails, and has three subtests:
+- "example_test_1", which passes, and has one subtest:
+
+   - "test_1", which passes, and outputs the diagnostic message "test_1: initializing test_1"
+
+- "example_test_2", which passes, and has two subtests:
+
+   - "test_1", which is skipped, with the explanation "test_1 skipped"
+   - "test_2", which passes
+
+- "example_test_3", which fails, and has three subtests
+
+   - "test_1", which passes
+   - "test_2", which outputs the diagnostic line "test_2: FAIL", and fails.
+   - "test_3", which is skipped with the explanation "test_3 skipped"
+
+Note that the individual subtests with the same names do not conflict, as they
+are found in different parent tests. This output also exhibits some sensible
+rules for "bubbling up" test results: a test fails if any of its subtests fail.
+Skipped tests do not affect the result of the parent test (though it often
+makes sense for a test to be marked skipped if _all_ of its subtests have been
+skipped).
+
+See also:
+---------
+
+- The TAP specification:
+  https://testanything.org/tap-version-13-specification.html
+- The (stagnant) TAP version 14 specification:
+  https://github.com/TestAnything/Specification/blob/tap-14-specification/specification.md
+- The kselftest documentation:
+  Documentation/dev-tools/kselftest.rst
+- The KUnit documentation:
+  Documentation/dev-tools/kunit/index.rst
diff --git a/Documentation/dev-tools/kunit/api/functionredirection.rst b/Documentation/dev-tools/kunit/api/functionredirection.rst
new file mode 100644
index 000000000000..3791efc2fcca
--- /dev/null
+++ b/Documentation/dev-tools/kunit/api/functionredirection.rst
@@ -0,0 +1,162 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Function Redirection API
+========================
+
+Overview
+========
+
+When writing unit tests, it's important to be able to isolate the code being
+tested from other parts of the kernel. This ensures the reliability of the test
+(it won't be affected by external factors), reduces dependencies on specific
+hardware or config options (making the test easier to run), and protects the
+stability of the rest of the system (making it less likely for test-specific
+state to interfere with the rest of the system).
+
+While for some code (typically generic data structures, helpers, and other
+"pure functions") this is trivial, for others (like device drivers,
+filesystems, core subsystems) the code is heavily coupled with other parts of
+the kernel.
+
+This coupling is often due to global state in some way: be it a global list of
+devices, the filesystem, or some hardware state. Tests need to either carefully
+manage, isolate, and restore state, or they can avoid it altogether by
+replacing access to and mutation of this state with a "fake" or "mock" variant.
+
+By refactoring access to such state, such as by introducing a layer of
+indirection which can use or emulate a separate set of test state. However,
+such refactoring comes with its own costs (and undertaking significant
+refactoring before being able to write tests is suboptimal).
+
+A simpler way to intercept and replace some of the function calls is to use
+function redirection via static stubs.
+
+
+Static Stubs
+============
+
+Static stubs are a way of redirecting calls to one function (the "real"
+function) to another function (the "replacement" function).
+
+It works by adding a macro to the "real" function which checks to see if a test
+is running, and if a replacement function is available. If so, that function is
+called in place of the original.
+
+Using static stubs is pretty straightforward:
+
+1. Add the KUNIT_STATIC_STUB_REDIRECT() macro to the start of the "real"
+   function.
+
+   This should be the first statement in the function, after any variable
+   declarations. KUNIT_STATIC_STUB_REDIRECT() takes the name of the
+   function, followed by all of the arguments passed to the real function.
+
+   For example:
+
+   .. code-block:: c
+
+	void send_data_to_hardware(const char *str)
+	{
+		KUNIT_STATIC_STUB_REDIRECT(send_data_to_hardware, str);
+		/* real implementation */
+	}
+
+2. Write one or more replacement functions.
+
+   These functions should have the same function signature as the real function.
+   In the event they need to access or modify test-specific state, they can use
+   kunit_get_current_test() to get a struct kunit pointer. This can then
+   be passed to the expectation/assertion macros, or used to look up KUnit
+   resources.
+
+   For example:
+
+   .. code-block:: c
+
+	void fake_send_data_to_hardware(const char *str)
+	{
+		struct kunit *test = kunit_get_current_test();
+		KUNIT_EXPECT_STREQ(test, str, "Hello World!");
+	}
+
+3. Activate the static stub from your test.
+
+   From within a test, the redirection can be enabled with
+   kunit_activate_static_stub(), which accepts a struct kunit pointer,
+   the real function, and the replacement function. You can call this several
+   times with different replacement functions to swap out implementations of the
+   function.
+
+   In our example, this would be
+
+   .. code-block:: c
+
+	kunit_activate_static_stub(test,
+				   send_data_to_hardware,
+				   fake_send_data_to_hardware);
+
+4. Call (perhaps indirectly) the real function.
+
+   Once the redirection is activated, any call to the real function will call
+   the replacement function instead. Such calls may be buried deep in the
+   implementation of another function, but must occur from the test's kthread.
+
+   For example:
+
+   .. code-block:: c
+
+	send_data_to_hardware("Hello World!"); /* Succeeds */
+	send_data_to_hardware("Something else"); /* Fails the test. */
+
+5. (Optionally) disable the stub.
+
+   When you no longer need it, disable the redirection (and hence resume the
+   original behaviour of the 'real' function) using
+   kunit_deactivate_static_stub(). Otherwise, it will be automatically disabled
+   when the test exits.
+
+   For example:
+
+   .. code-block:: c
+
+	kunit_deactivate_static_stub(test, send_data_to_hardware);
+
+
+It's also possible to use these replacement functions to test to see if a
+function is called at all, for example:
+
+.. code-block:: c
+
+	void send_data_to_hardware(const char *str)
+	{
+		KUNIT_STATIC_STUB_REDIRECT(send_data_to_hardware, str);
+		/* real implementation */
+	}
+
+	/* In test file */
+	int times_called = 0;
+	void fake_send_data_to_hardware(const char *str)
+	{
+		times_called++;
+	}
+	...
+	/* In the test case, redirect calls for the duration of the test */
+	kunit_activate_static_stub(test, send_data_to_hardware, fake_send_data_to_hardware);
+
+	send_data_to_hardware("hello");
+	KUNIT_EXPECT_EQ(test, times_called, 1);
+
+	/* Can also deactivate the stub early, if wanted */
+	kunit_deactivate_static_stub(test, send_data_to_hardware);
+
+	send_data_to_hardware("hello again");
+	KUNIT_EXPECT_EQ(test, times_called, 1);
+
+
+
+API Reference
+=============
+
+.. kernel-doc:: include/kunit/static_stub.h
+   :internal:
diff --git a/Documentation/dev-tools/kunit/api/index.rst b/Documentation/dev-tools/kunit/api/index.rst
index b33ad72bcf0b..2d8f756aab56 100644
--- a/Documentation/dev-tools/kunit/api/index.rst
+++ b/Documentation/dev-tools/kunit/api/index.rst
@@ -4,13 +4,24 @@
 API Reference
 =============
 .. toctree::
+	:hidden:
 
 	test
+	resource
+	functionredirection
 
-This section documents the KUnit kernel testing API. It is divided into the
+
+This page documents the KUnit kernel testing API. It is divided into the
 following sections:
 
 Documentation/dev-tools/kunit/api/test.rst
 
- - documents all of the standard testing API excluding mocking
-   or mocking related features.
+ - Documents all of the standard testing API
+
+Documentation/dev-tools/kunit/api/resource.rst
+
+ - Documents the KUnit resource API
+
+Documentation/dev-tools/kunit/api/functionredirection.rst
+
+ - Documents the KUnit Function Redirection API
diff --git a/Documentation/dev-tools/kunit/api/resource.rst b/Documentation/dev-tools/kunit/api/resource.rst
new file mode 100644
index 000000000000..0a94f831259e
--- /dev/null
+++ b/Documentation/dev-tools/kunit/api/resource.rst
@@ -0,0 +1,13 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============
+Resource API
+============
+
+This file documents the KUnit resource API.
+
+Most users won't need to use this API directly, power users can use it to store
+state on a per-test basis, register custom cleanup actions, and more.
+
+.. kernel-doc:: include/kunit/resource.h
+   :internal:
diff --git a/Documentation/dev-tools/kunit/api/test.rst b/Documentation/dev-tools/kunit/api/test.rst
index aaa97f17e5b3..c5eca423e8b6 100644
--- a/Documentation/dev-tools/kunit/api/test.rst
+++ b/Documentation/dev-tools/kunit/api/test.rst
@@ -4,8 +4,7 @@
 Test API
 ========
 
-This file documents all of the standard testing API excluding mocking or mocking
-related features.
+This file documents all of the standard testing API.
 
 .. kernel-doc:: include/kunit/test.h
    :internal:
diff --git a/Documentation/dev-tools/kunit/architecture.rst b/Documentation/dev-tools/kunit/architecture.rst
new file mode 100644
index 000000000000..e95ab05342bb
--- /dev/null
+++ b/Documentation/dev-tools/kunit/architecture.rst
@@ -0,0 +1,196 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==================
+KUnit Architecture
+==================
+
+The KUnit architecture is divided into two parts:
+
+- `In-Kernel Testing Framework`_
+- `kunit_tool (Command-line Test Harness)`_
+
+In-Kernel Testing Framework
+===========================
+
+The kernel testing library supports KUnit tests written in C using
+KUnit. These KUnit tests are kernel code. KUnit performs the following
+tasks:
+
+- Organizes tests
+- Reports test results
+- Provides test utilities
+
+Test Cases
+----------
+
+The test case is the fundamental unit in KUnit. KUnit test cases are organised
+into suites. A KUnit test case is a function with type signature
+``void (*)(struct kunit *test)``. These test case functions are wrapped in a
+struct called struct kunit_case.
+
+.. note:
+	``generate_params`` is optional for non-parameterized tests.
+
+Each KUnit test case receives a ``struct kunit`` context object that tracks a
+running test. The KUnit assertion macros and other KUnit utilities use the
+``struct kunit`` context object. As an exception, there are two fields:
+
+- ``->priv``: The setup functions can use it to store arbitrary test
+  user data.
+
+- ``->param_value``: It contains the parameter value which can be
+  retrieved in the parameterized tests.
+
+Test Suites
+-----------
+
+A KUnit suite includes a collection of test cases. The KUnit suites
+are represented by the ``struct kunit_suite``. For example:
+
+.. code-block:: c
+
+	static struct kunit_case example_test_cases[] = {
+		KUNIT_CASE(example_test_foo),
+		KUNIT_CASE(example_test_bar),
+		KUNIT_CASE(example_test_baz),
+		{}
+	};
+
+	static struct kunit_suite example_test_suite = {
+		.name = "example",
+		.init = example_test_init,
+		.exit = example_test_exit,
+		.test_cases = example_test_cases,
+	};
+	kunit_test_suite(example_test_suite);
+
+In the above example, the test suite ``example_test_suite``, runs the
+test cases ``example_test_foo``, ``example_test_bar``, and
+``example_test_baz``. Before running the test, the ``example_test_init``
+is called and after running the test, ``example_test_exit`` is called.
+The ``kunit_test_suite(example_test_suite)`` registers the test suite
+with the KUnit test framework.
+
+Executor
+--------
+
+The KUnit executor can list and run built-in KUnit tests on boot.
+The Test suites are stored in a linker section
+called ``.kunit_test_suites``. For the code, see ``KUNIT_TABLE()`` macro
+definition in
+`include/asm-generic/vmlinux.lds.h <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/asm-generic/vmlinux.lds.h?h=v6.0#n950>`_.
+The linker section consists of an array of pointers to
+``struct kunit_suite``, and is populated by the ``kunit_test_suites()``
+macro. The KUnit executor iterates over the linker section array in order to
+run all the tests that are compiled into the kernel.
+
+.. kernel-figure:: kunit_suitememorydiagram.svg
+	:alt:	KUnit Suite Memory
+
+	KUnit Suite Memory Diagram
+
+On the kernel boot, the KUnit executor uses the start and end addresses
+of this section to iterate over and run all tests. For the implementation of the
+executor, see
+`lib/kunit/executor.c <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/lib/kunit/executor.c>`_.
+When built as a module, the ``kunit_test_suites()`` macro defines a
+``module_init()`` function, which runs all the tests in the compilation
+unit instead of utilizing the executor.
+
+In KUnit tests, some error classes do not affect other tests
+or parts of the kernel, each KUnit case executes in a separate thread
+context. See the ``kunit_try_catch_run()`` function in
+`lib/kunit/try-catch.c <https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/lib/kunit/try-catch.c?h=v5.15#n58>`_.
+
+Assertion Macros
+----------------
+
+KUnit tests verify state using expectations/assertions.
+All expectations/assertions are formatted as:
+``KUNIT_{EXPECT|ASSERT}_<op>[_MSG](kunit, property[, message])``
+
+- ``{EXPECT|ASSERT}`` determines whether the check is an assertion or an
+  expectation.
+  In the event of a failure, the testing flow differs as follows:
+
+	- For expectations, the test is marked as failed and the failure is logged.
+
+	- Failing assertions, on the other hand, result in the test case being
+	  terminated immediately.
+
+		- Assertions call the function:
+		  ``void __noreturn kunit_abort(struct kunit *)``.
+
+		- ``kunit_abort`` calls the function:
+		  ``void __noreturn kunit_try_catch_throw(struct kunit_try_catch *try_catch)``.
+
+		- ``kunit_try_catch_throw`` calls the function:
+		  ``void kthread_complete_and_exit(struct completion *, long) __noreturn;``
+		  and terminates the special thread context.
+
+- ``<op>`` denotes a check with options: ``TRUE`` (supplied property
+  has the boolean value "true"), ``EQ`` (two supplied properties are
+  equal), ``NOT_ERR_OR_NULL`` (supplied pointer is not null and does not
+  contain an "err" value).
+
+- ``[_MSG]`` prints a custom message on failure.
+
+Test Result Reporting
+---------------------
+KUnit prints the test results in KTAP format. KTAP is based on TAP14, see
+Documentation/dev-tools/ktap.rst.
+KTAP works with KUnit and Kselftest. The KUnit executor prints KTAP results to
+dmesg, and debugfs (if configured).
+
+Parameterized Tests
+-------------------
+
+Each KUnit parameterized test is associated with a collection of
+parameters. The test is invoked multiple times, once for each parameter
+value and the parameter is stored in the ``param_value`` field.
+The test case includes a KUNIT_CASE_PARAM() macro that accepts a
+generator function. The generator function is passed the previous parameter
+and returns the next parameter. It also includes a macro for generating
+array-based common-case generators.
+
+kunit_tool (Command-line Test Harness)
+======================================
+
+``kunit_tool`` is a Python script, found in ``tools/testing/kunit/kunit.py``. It
+is used to configure, build, execute, parse test results and run all of the
+previous commands in correct order (i.e., configure, build, execute and parse).
+You have two options for running KUnit tests: either build the kernel with KUnit
+enabled and manually parse the results (see
+Documentation/dev-tools/kunit/run_manual.rst) or use ``kunit_tool``
+(see Documentation/dev-tools/kunit/run_wrapper.rst).
+
+- ``configure`` command generates the kernel ``.config`` from a
+  ``.kunitconfig`` file (and any architecture-specific options).
+  The Python scripts available in ``qemu_configs`` folder
+  (for example, ``tools/testing/kunit/qemu configs/powerpc.py``) contains
+  additional configuration options for specific architectures.
+  It parses both the existing ``.config`` and the ``.kunitconfig`` files
+  to ensure that ``.config`` is a superset of ``.kunitconfig``.
+  If not, it will combine the two and run ``make olddefconfig`` to regenerate
+  the ``.config`` file. It then checks to see if ``.config`` has become a superset.
+  This verifies that all the Kconfig dependencies are correctly specified in the
+  file ``.kunitconfig``. The ``kunit_config.py`` script contains the code for parsing
+  Kconfigs. The code which runs ``make olddefconfig`` is part of the
+  ``kunit_kernel.py`` script. You can invoke this command through:
+  ``./tools/testing/kunit/kunit.py config`` and
+  generate a ``.config`` file.
+- ``build`` runs ``make`` on the kernel tree with required options
+  (depends on the architecture and some options, for example: build_dir)
+  and reports any errors.
+  To build a KUnit kernel from the current ``.config``, you can use the
+  ``build`` argument: ``./tools/testing/kunit/kunit.py build``.
+- ``exec`` command executes kernel results either directly (using
+  User-mode Linux configuration), or through an emulator such
+  as QEMU. It reads results from the log using standard
+  output (stdout), and passes them to ``parse`` to be parsed.
+  If you already have built a kernel with built-in KUnit tests,
+  you can run the kernel and display the test results with the ``exec``
+  argument: ``./tools/testing/kunit/kunit.py exec``.
+- ``parse`` extracts the KTAP output from a kernel log, parses
+  the test results, and prints a summary. For failed tests, any
+  diagnostic output will be included.
diff --git a/Documentation/dev-tools/kunit/faq.rst b/Documentation/dev-tools/kunit/faq.rst
index 5c6555d020f3..fae426f2634a 100644
--- a/Documentation/dev-tools/kunit/faq.rst
+++ b/Documentation/dev-tools/kunit/faq.rst
@@ -4,56 +4,58 @@
 Frequently Asked Questions
 ==========================
 
-How is this different from Autotest, kselftest, etc?
-====================================================
+How is this different from Autotest, kselftest, and so on?
+==========================================================
 KUnit is a unit testing framework. Autotest, kselftest (and some others) are
 not.
 
 A `unit test <https://martinfowler.com/bliki/UnitTest.html>`_ is supposed to
-test a single unit of code in isolation, hence the name. A unit test should be
-the finest granularity of testing and as such should allow all possible code
-paths to be tested in the code under test; this is only possible if the code
-under test is very small and does not have any external dependencies outside of
+test a single unit of code in isolation and hence the name *unit test*. A unit
+test should be the finest granularity of testing and should allow all possible
+code paths to be tested in the code under test. This is only possible if the
+code under test is small and does not have any external dependencies outside of
 the test's control like hardware.
 
 There are no testing frameworks currently available for the kernel that do not
-require installing the kernel on a test machine or in a VM and all require
-tests to be written in userspace and run on the kernel under test; this is true
-for Autotest, kselftest, and some others, disqualifying any of them from being
-considered unit testing frameworks.
+require installing the kernel on a test machine or in a virtual machine. All
+testing frameworks require tests to be written in userspace and run on the
+kernel under test. This is true for Autotest, kselftest, and some others,
+disqualifying any of them from being considered unit testing frameworks.
 
 Does KUnit support running on architectures other than UML?
 ===========================================================
 
-Yes, well, mostly.
+Yes, mostly.
 
-For the most part, the KUnit core framework (what you use to write the tests)
-can compile to any architecture; it compiles like just another part of the
+For the most part, the KUnit core framework (what we use to write the tests)
+can compile to any architecture. It compiles like just another part of the
 kernel and runs when the kernel boots, or when built as a module, when the
-module is loaded.  However, there is some infrastructure,
-like the KUnit Wrapper (``tools/testing/kunit/kunit.py``) that does not support
-other architectures.
+module is loaded.  However, there is infrastructure, like the KUnit Wrapper
+(``tools/testing/kunit/kunit.py``) that might not support some architectures
+(see :ref:`kunit-on-qemu`).
 
-In short, this means that, yes, you can run KUnit on other architectures, but
-it might require more work than using KUnit on UML.
+In short, yes, you can run KUnit on other architectures, but it might require
+more work than using KUnit on UML.
 
 For more information, see :ref:`kunit-on-non-uml`.
 
-What is the difference between a unit test and these other kinds of tests?
-==========================================================================
+.. _kinds-of-tests:
+
+What is the difference between a unit test and other kinds of tests?
+====================================================================
 Most existing tests for the Linux kernel would be categorized as an integration
 test, or an end-to-end test.
 
-- A unit test is supposed to test a single unit of code in isolation, hence the
-  name. A unit test should be the finest granularity of testing and as such
-  should allow all possible code paths to be tested in the code under test; this
-  is only possible if the code under test is very small and does not have any
-  external dependencies outside of the test's control like hardware.
+- A unit test is supposed to test a single unit of code in isolation. A unit
+  test should be the finest granularity of testing and, as such, allows all
+  possible code paths to be tested in the code under test. This is only possible
+  if the code under test is small and does not have any external dependencies
+  outside of the test's control like hardware.
 - An integration test tests the interaction between a minimal set of components,
   usually just two or three. For example, someone might write an integration
   test to test the interaction between a driver and a piece of hardware, or to
   test the interaction between the userspace libraries the kernel provides and
-  the kernel itself; however, one of these tests would probably not test the
+  the kernel itself. However, one of these tests would probably not test the
   entire kernel along with hardware interactions and interactions with the
   userspace.
 - An end-to-end test usually tests the entire system from the perspective of the
@@ -62,26 +64,26 @@ test, or an end-to-end test.
   hardware with a production userspace and then trying to exercise some behavior
   that depends on interactions between the hardware, the kernel, and userspace.
 
-KUnit isn't working, what should I do?
-======================================
+KUnit is not working, what should I do?
+=======================================
 
 Unfortunately, there are a number of things which can break, but here are some
 things to try.
 
-1. Try running ``./tools/testing/kunit/kunit.py run`` with the ``--raw_output``
+1. Run ``./tools/testing/kunit/kunit.py run`` with the ``--raw_output``
    parameter. This might show details or error messages hidden by the kunit_tool
    parser.
 2. Instead of running ``kunit.py run``, try running ``kunit.py config``,
    ``kunit.py build``, and ``kunit.py exec`` independently. This can help track
    down where an issue is occurring. (If you think the parser is at fault, you
-   can run it manually against stdin or a file with ``kunit.py parse``.)
-3. Running the UML kernel directly can often reveal issues or error messages
-   kunit_tool ignores. This should be as simple as running ``./vmlinux`` after
-   building the UML kernel (e.g., by using ``kunit.py build``). Note that UML
-   has some unusual requirements (such as the host having a tmpfs filesystem
-   mounted), and has had issues in the past when built statically and the host
-   has KASLR enabled. (On older host kernels, you may need to run ``setarch
-   `uname -m` -R ./vmlinux`` to disable KASLR.)
+   can run it manually against ``stdin`` or a file with ``kunit.py parse``.)
+3. Running the UML kernel directly can often reveal issues or error messages,
+   ``kunit_tool`` ignores. This should be as simple as running ``./vmlinux``
+   after building the UML kernel (for example, by using ``kunit.py build``).
+   Note that UML has some unusual requirements (such as the host having a tmpfs
+   filesystem mounted), and has had issues in the past when built statically and
+   the host has KASLR enabled. (On older host kernels, you may need to run
+   ``setarch `uname -m` -R ./vmlinux`` to disable KASLR.)
 4. Make sure the kernel .config has ``CONFIG_KUNIT=y`` and at least one test
    (e.g. ``CONFIG_KUNIT_EXAMPLE_TEST=y``). kunit_tool will keep its .config
    around, so you can see what config was used after running ``kunit.py run``.
@@ -96,8 +98,7 @@ things to try.
    seeing. When tests are built-in, they will execute when the kernel boots, and
    modules will automatically execute associated tests when loaded. Test results
    can be collected from ``/sys/kernel/debug/kunit/<test suite>/results``, and
-   can be parsed with ``kunit.py parse``. For more details, see "KUnit on
-   non-UML architectures" in Documentation/dev-tools/kunit/usage.rst.
+   can be parsed with ``kunit.py parse``. For more details, see :ref:`kunit-on-qemu`.
 
 If none of the above tricks help, you are always welcome to email any issues to
 kunit-dev@googlegroups.com.
diff --git a/Documentation/dev-tools/kunit/index.rst b/Documentation/dev-tools/kunit/index.rst
index cacb35ec658d..b3593ae29ace 100644
--- a/Documentation/dev-tools/kunit/index.rst
+++ b/Documentation/dev-tools/kunit/index.rst
@@ -1,97 +1,109 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-=========================================
-KUnit - Unit Testing for the Linux Kernel
-=========================================
+=================================
+KUnit - Linux Kernel Unit Testing
+=================================
 
 .. toctree::
 	:maxdepth: 2
+	:caption: Contents:
 
 	start
+	architecture
+	run_wrapper
+	run_manual
 	usage
-	kunit-tool
 	api/index
 	style
 	faq
-	tips
 	running_tips
 
-What is KUnit?
-==============
-
-KUnit is a lightweight unit testing and mocking framework for the Linux kernel.
-
-KUnit is heavily inspired by JUnit, Python's unittest.mock, and
-Googletest/Googlemock for C++. KUnit provides facilities for defining unit test
-cases, grouping related test cases into test suites, providing common
-infrastructure for running tests, and much more.
-
-KUnit consists of a kernel component, which provides a set of macros for easily
-writing unit tests. Tests written against KUnit will run on kernel boot if
-built-in, or when loaded if built as a module. These tests write out results to
-the kernel log in `TAP <https://testanything.org/>`_ format.
-
-To make running these tests (and reading the results) easier, KUnit offers
-:doc:`kunit_tool <kunit-tool>`, which builds a `User Mode Linux
-<http://user-mode-linux.sourceforge.net>`_ kernel, runs it, and parses the test
-results. This provides a quick way of running KUnit tests during development,
-without requiring a virtual machine or separate hardware.
-
-Get started now: Documentation/dev-tools/kunit/start.rst
-
-Why KUnit?
-==========
-
-A unit test is supposed to test a single unit of code in isolation, hence the
-name. A unit test should be the finest granularity of testing and as such should
-allow all possible code paths to be tested in the code under test; this is only
-possible if the code under test is very small and does not have any external
-dependencies outside of the test's control like hardware.
-
-KUnit provides a common framework for unit tests within the kernel.
-
-KUnit tests can be run on most architectures, and most tests are architecture
-independent. All built-in KUnit tests run on kernel startup.  Alternatively,
-KUnit and KUnit tests can be built as modules and tests will run when the test
-module is loaded.
-
-.. note::
-
-        KUnit can also run tests without needing a virtual machine or actual
-        hardware under User Mode Linux. User Mode Linux is a Linux architecture,
-        like ARM or x86, which compiles the kernel as a Linux executable. KUnit
-        can be used with UML either by building with ``ARCH=um`` (like any other
-        architecture), or by using :doc:`kunit_tool <kunit-tool>`.
-
-KUnit is fast. Excluding build time, from invocation to completion KUnit can run
-several dozen tests in only 10 to 20 seconds; this might not sound like a big
-deal to some people, but having such fast and easy to run tests fundamentally
-changes the way you go about testing and even writing code in the first place.
-Linus himself said in his `git talk at Google
-<https://gist.github.com/lorn/1272686/revisions#diff-53c65572127855f1b003db4064a94573R874>`_:
-
-	"... a lot of people seem to think that performance is about doing the
-	same thing, just doing it faster, and that is not true. That is not what
-	performance is all about. If you can do something really fast, really
-	well, people will start using it differently."
-
-In this context Linus was talking about branching and merging,
-but this point also applies to testing. If your tests are slow, unreliable, are
-difficult to write, and require a special setup or special hardware to run,
-then you wait a lot longer to write tests, and you wait a lot longer to run
-tests; this means that tests are likely to break, unlikely to test a lot of
-things, and are unlikely to be rerun once they pass. If your tests are really
-fast, you run them all the time, every time you make a change, and every time
-someone sends you some code. Why trust that someone ran all their tests
-correctly on every change when you can just run them yourself in less time than
-it takes to read their test log?
+This section details the kernel unit testing framework.
+
+Introduction
+============
+
+KUnit (Kernel unit testing framework) provides a common framework for
+unit tests within the Linux kernel. Using KUnit, you can define groups
+of test cases called test suites. The tests either run on kernel boot
+if built-in, or load as a module. KUnit automatically flags and reports
+failed test cases in the kernel log. The test results appear in
+:doc:`KTAP (Kernel - Test Anything Protocol) format</dev-tools/ktap>`.
+It is inspired by JUnit, Python’s unittest.mock, and GoogleTest/GoogleMock
+(C++ unit testing framework).
+
+KUnit tests are part of the kernel, written in the C (programming)
+language, and test parts of the Kernel implementation (example: a C
+language function). Excluding build time, from invocation to
+completion, KUnit can run around 100 tests in less than 10 seconds.
+KUnit can test any kernel component, for example: file system, system
+calls, memory management, device drivers and so on.
+
+KUnit follows the white-box testing approach. The test has access to
+internal system functionality. KUnit runs in kernel space and is not
+restricted to things exposed to user-space.
+
+In addition, KUnit has kunit_tool, a script (``tools/testing/kunit/kunit.py``)
+that configures the Linux kernel, runs KUnit tests under QEMU or UML
+(:doc:`User Mode Linux </virt/uml/user_mode_linux_howto_v2>`),
+parses the test results and
+displays them in a user friendly manner.
+
+Features
+--------
+
+- Provides a framework for writing unit tests.
+- Runs tests on any kernel architecture.
+- Runs a test in milliseconds.
+
+Prerequisites
+-------------
+
+- Any Linux kernel compatible hardware.
+- For Kernel under test, Linux kernel version 5.5 or greater.
+
+Unit Testing
+============
+
+A unit test tests a single unit of code in isolation. A unit test is the finest
+granularity of testing and allows all possible code paths to be tested in the
+code under test. This is possible if the code under test is small and does not
+have any external dependencies outside of the test's control like hardware.
+
+
+Write Unit Tests
+----------------
+
+To write good unit tests, there is a simple but powerful pattern:
+Arrange-Act-Assert. This is a great way to structure test cases and
+defines an order of operations.
+
+- Arrange inputs and targets: At the start of the test, arrange the data
+  that allows a function to work. Example: initialize a statement or
+  object.
+- Act on the target behavior: Call your function/code under test.
+- Assert expected outcome: Verify that the result (or resulting state) is as
+  expected.
+
+Unit Testing Advantages
+-----------------------
+
+- Increases testing speed and development in the long run.
+- Detects bugs at initial stage and therefore decreases bug fix cost
+  compared to acceptance testing.
+- Improves code quality.
+- Encourages writing testable code.
+
+Read also :ref:`kinds-of-tests`.
 
 How do I use it?
 ================
 
-*   Documentation/dev-tools/kunit/start.rst - for new users of KUnit
-*   Documentation/dev-tools/kunit/tips.rst - for short examples of best practices
-*   Documentation/dev-tools/kunit/usage.rst - for a more detailed explanation of KUnit features
-*   Documentation/dev-tools/kunit/api/index.rst - for the list of KUnit APIs used for testing
-*   Documentation/dev-tools/kunit/kunit-tool.rst - for more information on the kunit_tool helper script
-*   Documentation/dev-tools/kunit/faq.rst - for answers to some common questions about KUnit
+You can find a step-by-step guide to writing and running KUnit tests in
+Documentation/dev-tools/kunit/start.rst
+
+Alternatively, feel free to look through the rest of the KUnit documentation,
+or to experiment with tools/testing/kunit/kunit.py and the example test under
+lib/kunit/kunit-example-test.c
+
+Happy testing!
diff --git a/Documentation/dev-tools/kunit/kunit-tool.rst b/Documentation/dev-tools/kunit/kunit-tool.rst
deleted file mode 100644
index ae52e0f489f9..000000000000
--- a/Documentation/dev-tools/kunit/kunit-tool.rst
+++ /dev/null
@@ -1,232 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-=================
-kunit_tool How-To
-=================
-
-What is kunit_tool?
-===================
-
-kunit_tool is a script (``tools/testing/kunit/kunit.py``) that aids in building
-the Linux kernel as UML (`User Mode Linux
-<http://user-mode-linux.sourceforge.net/>`_), running KUnit tests, parsing
-the test results and displaying them in a user friendly manner.
-
-kunit_tool addresses the problem of being able to run tests without needing a
-virtual machine or actual hardware with User Mode Linux. User Mode Linux is a
-Linux architecture, like ARM or x86; however, unlike other architectures it
-compiles the kernel as a standalone Linux executable that can be run like any
-other program directly inside of a host operating system. To be clear, it does
-not require any virtualization support: it is just a regular program.
-
-What is a .kunitconfig?
-=======================
-
-It's just a defconfig that kunit_tool looks for in the build directory
-(``.kunit`` by default).  kunit_tool uses it to generate a .config as you might
-expect. In addition, it verifies that the generated .config contains the CONFIG
-options in the .kunitconfig; the reason it does this is so that it is easy to
-be sure that a CONFIG that enables a test actually ends up in the .config.
-
-It's also possible to pass a separate .kunitconfig fragment to kunit_tool,
-which is useful if you have several different groups of tests you wish
-to run independently, or if you want to use pre-defined test configs for
-certain subsystems.
-
-Getting Started with kunit_tool
-===============================
-
-If a kunitconfig is present at the root directory, all you have to do is:
-
-.. code-block:: bash
-
-	./tools/testing/kunit/kunit.py run
-
-However, you most likely want to use it with the following options:
-
-.. code-block:: bash
-
-	./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all`
-
-- ``--timeout`` sets a maximum amount of time to allow tests to run.
-- ``--jobs`` sets the number of threads to use to build the kernel.
-
-.. note::
-	This command will work even without a .kunitconfig file: if no
-	.kunitconfig is present, a default one will be used instead.
-
-If you wish to use a different .kunitconfig file (such as one provided for
-testing a particular subsystem), you can pass it as an option.
-
-.. code-block:: bash
-
-	./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4/.kunitconfig
-
-For a list of all the flags supported by kunit_tool, you can run:
-
-.. code-block:: bash
-
-	./tools/testing/kunit/kunit.py run --help
-
-Configuring, Building, and Running Tests
-========================================
-
-It's also possible to run just parts of the KUnit build process independently,
-which is useful if you want to make manual changes to part of the process.
-
-A .config can be generated from a .kunitconfig by using the ``config`` argument
-when running kunit_tool:
-
-.. code-block:: bash
-
-	./tools/testing/kunit/kunit.py config
-
-Similarly, if you just want to build a KUnit kernel from the current .config,
-you can use the ``build`` argument:
-
-.. code-block:: bash
-
-	./tools/testing/kunit/kunit.py build
-
-And, if you already have a built UML kernel with built-in KUnit tests, you can
-run the kernel and display the test results with the ``exec`` argument:
-
-.. code-block:: bash
-
-	./tools/testing/kunit/kunit.py exec
-
-The ``run`` command which is discussed above is equivalent to running all three
-of these in sequence.
-
-All of these commands accept a number of optional command-line arguments. The
-``--help`` flag will give a complete list of these, or keep reading this page
-for a guide to some of the more useful ones.
-
-Parsing Test Results
-====================
-
-KUnit tests output their results in TAP (Test Anything Protocol) format.
-kunit_tool will, when running tests, parse this output and print a summary
-which is much more pleasant to read. If you wish to look at the raw test
-results in TAP format, you can pass the ``--raw_output`` argument.
-
-.. code-block:: bash
-
-	./tools/testing/kunit/kunit.py run --raw_output
-
-The raw output from test runs may contain other, non-KUnit kernel log
-lines. You can see just KUnit output with ``--raw_output=kunit``:
-
-.. code-block:: bash
-
-	./tools/testing/kunit/kunit.py run --raw_output=kunit
-
-If you have KUnit results in their raw TAP format, you can parse them and print
-the human-readable summary with the ``parse`` command for kunit_tool. This
-accepts a filename for an argument, or will read from standard input.
-
-.. code-block:: bash
-
-	# Reading from a file
-	./tools/testing/kunit/kunit.py parse /var/log/dmesg
-	# Reading from stdin
-	dmesg | ./tools/testing/kunit/kunit.py parse
-
-This is very useful if you wish to run tests in a configuration not supported
-by kunit_tool (such as on real hardware, or an unsupported architecture).
-
-Filtering Tests
-===============
-
-It's possible to run only a subset of the tests built into a kernel by passing
-a filter to the ``exec`` or ``run`` commands. For example, if you only wanted
-to run KUnit resource tests, you could use:
-
-.. code-block:: bash
-
-	./tools/testing/kunit/kunit.py run 'kunit-resource*'
-
-This uses the standard glob format for wildcards.
-
-Running Tests on QEMU
-=====================
-
-kunit_tool supports running tests on QEMU as well as via UML (as mentioned
-elsewhere). The default way of running tests on QEMU requires two flags:
-
-``--arch``
-	Selects a collection of configs (Kconfig as well as QEMU configs
-	options, etc) that allow KUnit tests to be run on the specified
-	architecture in a minimal way; this is usually not much slower than
-	using UML. The architecture argument is the same as the name of the
-	option passed to the ``ARCH`` variable used by Kbuild. Not all
-	architectures are currently supported by this flag, but can be handled
-	by the ``--qemu_config`` discussed later. If ``um`` is passed (or this
-	this flag is ignored) the tests will run via UML. Non-UML architectures,
-	e.g. i386, x86_64, arm, um, etc. Non-UML run on QEMU.
-
-``--cross_compile``
-	Specifies the use of a toolchain by Kbuild. The argument passed here is
-	the same passed to the ``CROSS_COMPILE`` variable used by Kbuild. As a
-	reminder this will be the prefix for the toolchain binaries such as gcc
-	for example ``sparc64-linux-gnu-`` if you have the sparc toolchain
-	installed on your system, or
-	``$HOME/toolchains/microblaze/gcc-9.2.0-nolibc/microblaze-linux/bin/microblaze-linux-``
-	if you have downloaded the microblaze toolchain from the 0-day website
-	to a directory in your home directory called ``toolchains``.
-
-In many cases it is likely that you may want to run an architecture which is
-not supported by the ``--arch`` flag, or you may want to just run KUnit tests
-on QEMU using a non-default configuration. For this use case, you can write
-your own QemuConfig. These QemuConfigs are written in Python. They must have an
-import line ``from ..qemu_config import QemuArchParams`` at the top of the file
-and the file must contain a variable called ``QEMU_ARCH`` that has an instance
-of ``QemuArchParams`` assigned to it. An example can be seen in
-``tools/testing/kunit/qemu_configs/x86_64.py``.
-
-Once you have a QemuConfig you can pass it into kunit_tool using the
-``--qemu_config`` flag; when used this flag replaces the ``--arch`` flag. If we
-were to do this with the ``x86_64.py`` example from above, the invocation would
-look something like this:
-
-.. code-block:: bash
-
-	./tools/testing/kunit/kunit.py run \
-		--timeout=60 \
-		--jobs=12 \
-		--qemu_config=./tools/testing/kunit/qemu_configs/x86_64.py
-
-Other Useful Options
-====================
-
-kunit_tool has a number of other command-line arguments which can be useful
-when adapting it to fit your environment or needs.
-
-Some of the more useful ones are:
-
-``--help``
-	Lists all of the available options. Note that different commands
-	(``config``, ``build``, ``run``, etc) will have different supported
-	options. Place ``--help`` before the command to list common options,
-	and after the command for options specific to that command.
-
-``--build_dir``
-	Specifies the build directory that kunit_tool will use. This is where
-	the .kunitconfig file is located, as well as where the .config and
-	compiled kernel will be placed. Defaults to ``.kunit``.
-
-``--make_options``
-	Specifies additional options to pass to ``make`` when compiling a
-	kernel (with the ``build`` or ``run`` commands). For example, to enable
-	compiler warnings, you can pass ``--make_options W=1``.
-
-``--alltests``
-        Builds a UML kernel with all config options enabled using ``make
-        allyesconfig``. This allows you to run as many tests as is possible,
-        but is very slow and prone to breakage as new options are added or
-        modified. In most cases, enabling all tests which have satisfied
-        dependencies by adding ``CONFIG_KUNIT_ALL_TESTS=1`` to your
-        .kunitconfig is preferable.
-
-There are several other options (and new ones are often added), so do check
-``--help`` if you're looking for something not mentioned here.
diff --git a/Documentation/dev-tools/kunit/kunit_suitememorydiagram.svg b/Documentation/dev-tools/kunit/kunit_suitememorydiagram.svg
new file mode 100644
index 000000000000..cf8fddc27500
--- /dev/null
+++ b/Documentation/dev-tools/kunit/kunit_suitememorydiagram.svg
@@ -0,0 +1,81 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg width="796.93" height="555.73" version="1.1" viewBox="0 0 796.93 555.73" xmlns="http://www.w3.org/2000/svg">
+	<g transform="translate(-13.724 -17.943)">
+		<g fill="#dad4d4" fill-opacity=".91765" stroke="#1a1a1a">
+			<rect x="323.56" y="18.443" width="115.75" height="41.331"/>
+			<rect x="323.56" y="463.09" width="115.75" height="41.331"/>
+			<rect x="323.56" y="531.84" width="115.75" height="41.331"/>
+			<rect x="323.56" y="88.931" width="115.75" height="74.231"/>
+		</g>
+		<g>
+			<rect x="323.56" y="421.76" width="115.75" height="41.331" fill="#b9dbc6" stroke="#1a1a1a"/>
+			<text x="328.00888" y="446.61826" fill="#000000" font-family="sans-serif" font-size="16px" style="line-height:1.25" xml:space="preserve"><tspan x="328.00888" y="446.61826" font-family="monospace" font-size="16px">kunit_suite</tspan></text>
+		</g>
+		<g transform="translate(0 -258.6)">
+			<rect x="323.56" y="421.76" width="115.75" height="41.331" fill="#b9dbc6" stroke="#1a1a1a"/>
+			<text x="328.00888" y="446.61826" fill="#000000" font-family="sans-serif" font-size="16px" style="line-height:1.25" xml:space="preserve"><tspan x="328.00888" y="446.61826" font-family="monospace" font-size="16px">kunit_suite</tspan></text>
+		</g>
+		<g transform="translate(0 -217.27)">
+			<rect x="323.56" y="421.76" width="115.75" height="41.331" fill="#b9dbc6" stroke="#1a1a1a"/>
+			<text x="328.00888" y="446.61826" fill="#000000" font-family="sans-serif" font-size="16px" style="line-height:1.25" xml:space="preserve"><tspan x="328.00888" y="446.61826" font-family="monospace" font-size="16px">kunit_suite</tspan></text>
+		</g>
+		<g transform="translate(0 -175.94)">
+			<rect x="323.56" y="421.76" width="115.75" height="41.331" fill="#b9dbc6" stroke="#1a1a1a"/>
+			<text x="328.00888" y="446.61826" fill="#000000" font-family="sans-serif" font-size="16px" style="line-height:1.25" xml:space="preserve"><tspan x="328.00888" y="446.61826" font-family="monospace" font-size="16px">kunit_suite</tspan></text>
+		</g>
+		<g transform="translate(0 -134.61)">
+			<rect x="323.56" y="421.76" width="115.75" height="41.331" fill="#b9dbc6" stroke="#1a1a1a"/>
+			<text x="328.00888" y="446.61826" fill="#000000" font-family="sans-serif" font-size="16px" style="line-height:1.25" xml:space="preserve"><tspan x="328.00888" y="446.61826" font-family="monospace" font-size="16px">kunit_suite</tspan></text>
+		</g>
+		<g transform="translate(0 -41.331)">
+			<rect x="323.56" y="421.76" width="115.75" height="41.331" fill="#b9dbc6" stroke="#1a1a1a"/>
+			<text x="328.00888" y="446.61826" fill="#000000" font-family="sans-serif" font-size="16px" style="line-height:1.25" xml:space="preserve"><tspan x="328.00888" y="446.61826" font-family="monospace" font-size="16px">kunit_suite</tspan></text>
+		</g>
+		<g transform="translate(3.4459e-5 -.71088)">
+			<rect x="502.19" y="143.16" width="201.13" height="41.331" fill="#dad4d4" fill-opacity=".91765" stroke="#1a1a1a"/>
+			<text x="512.02319" y="168.02026" font-family="sans-serif" font-size="16px" style="line-height:1.25" xml:space="preserve"><tspan x="512.02319" y="168.02026" font-family="monospace">_kunit_suites_start</tspan></text>
+		</g>
+		<g transform="translate(3.0518e-5 -3.1753)">
+			<rect x="502.19" y="445.69" width="201.13" height="41.331" fill="#dad4d4" fill-opacity=".91765" stroke="#1a1a1a"/>
+			<text x="521.61694" y="470.54846" font-family="sans-serif" font-size="16px" style="line-height:1.25" xml:space="preserve"><tspan x="521.61694" y="470.54846" font-family="monospace">_kunit_suites_end</tspan></text>
+		</g>
+		<rect x="14.224" y="277.78" width="134.47" height="41.331" fill="#dad4d4" fill-opacity=".91765" stroke="#1a1a1a"/>
+		<text x="32.062176" y="304.41287" font-family="sans-serif" font-size="16px" style="line-height:1.25" xml:space="preserve"><tspan x="32.062176" y="304.41287" font-family="monospace">.init.data</tspan></text>
+		<g transform="translate(217.98 145.12)" stroke="#1a1a1a">
+			<circle cx="149.97" cy="373.01" r="3.4012"/>
+			<circle cx="163.46" cy="373.01" r="3.4012"/>
+			<circle cx="176.95" cy="373.01" r="3.4012"/>
+		</g>
+		<g transform="translate(217.98 -298.66)" stroke="#1a1a1a">
+			<circle cx="149.97" cy="373.01" r="3.4012"/>
+			<circle cx="163.46" cy="373.01" r="3.4012"/>
+			<circle cx="176.95" cy="373.01" r="3.4012"/>
+		</g>
+		<g stroke="#1a1a1a">
+			<rect x="323.56" y="328.49" width="115.75" height="51.549" fill="#b9dbc6"/>
+			<g transform="translate(217.98 -18.75)">
+				<circle cx="149.97" cy="373.01" r="3.4012"/>
+				<circle cx="163.46" cy="373.01" r="3.4012"/>
+				<circle cx="176.95" cy="373.01" r="3.4012"/>
+			</g>
+		</g>
+		<g transform="scale(1.0933 .9147)" stroke-width="32.937" aria-label="{">
+			<path d="m275.49 545.57c-35.836-8.432-47.43-24.769-47.957-64.821v-88.536c-0.527-44.795-10.54-57.97-49.538-67.456 38.998-10.013 49.011-23.715 49.538-67.983v-88.536c0.527-40.052 12.121-56.389 47.957-64.821v-5.797c-65.348 0-85.901 17.391-86.955 73.253v93.806c-0.527 36.89-10.013 50.065-44.795 59.551 34.782 10.013 44.268 23.188 44.795 60.078v93.279c1.581 56.389 21.607 73.78 86.955 73.78z"/>
+		</g>
+		<g transform="scale(1.1071 .90325)" stroke-width="14.44" aria-label="{">
+			<path d="m461.46 443.55c-15.711-3.6967-20.794-10.859-21.025-28.418v-38.815c-0.23104-19.639-4.6209-25.415-21.718-29.574 17.097-4.3898 21.487-10.397 21.718-29.805v-38.815c0.23105-17.559 5.314-24.722 21.025-28.418v-2.5415c-28.649 0-37.66 7.6244-38.122 32.115v41.126c-0.23105 16.173-4.3898 21.949-19.639 26.108 15.249 4.3898 19.408 10.166 19.639 26.339v40.895c0.69313 24.722 9.4728 32.346 38.122 32.346z"/>
+		</g>
+		<path d="m449.55 161.84v2.5h49.504v-2.5z" color="#000000" style="-inkscape-stroke:none"/>
+		<g fill-rule="evenodd">
+			<path d="m443.78 163.09 8.65-5v10z" color="#000000" stroke-width="1pt" style="-inkscape-stroke:none"/>
+			<path d="m453.1 156.94-10.648 6.1543 0.99804 0.57812 9.6504 5.5781zm-1.334 2.3125v7.6856l-6.6504-3.8438z" color="#000000" style="-inkscape-stroke:none"/>
+		</g>
+		<path d="m449.55 461.91v2.5h49.504v-2.5z" color="#000000" style="-inkscape-stroke:none"/>
+		<g fill-rule="evenodd">
+			<path d="m443.78 463.16 8.65-5v10z" color="#000000" stroke-width="1pt" style="-inkscape-stroke:none"/>
+			<path d="m453.1 457-10.648 6.1562 0.99804 0.57617 9.6504 5.5781zm-1.334 2.3125v7.6856l-6.6504-3.8438z" color="#000000" style="-inkscape-stroke:none"/>
+		</g>
+		<rect x="515.64" y="223.9" width="294.52" height="178.49" fill="#dad4d4" fill-opacity=".91765" stroke="#1a1a1a"/>
+		<text x="523.33319" y="262.52542" font-family="monospace" font-size="14.667px" style="line-height:1.25" xml:space="preserve"><tspan x="523.33319" y="262.52542"><tspan fill="#008000" font-family="monospace" font-size="14.667px" font-weight="bold">struct</tspan> kunit_suite {</tspan><tspan x="523.33319" y="280.8588"><tspan fill="#008000" font-family="monospace" font-size="14.667px" font-weight="bold">  const char</tspan> name[<tspan fill="#ff00ff" font-size="14.667px">256</tspan>];</tspan><tspan x="523.33319" y="299.19217">  <tspan fill="#008000" font-family="monospace" font-size="14.667px" font-weight="bold">int</tspan> (*init)(<tspan fill="#008000" font-family="monospace" font-size="14.667px" font-weight="bold">struct</tspan> kunit *);</tspan><tspan x="523.33319" y="317.52554">  <tspan fill="#008000" font-family="monospace" font-size="14.667px" font-weight="bold">void</tspan> (*exit)(<tspan fill="#008000" font-family="monospace" font-size="14.667px" font-weight="bold">struct</tspan> kunit *);</tspan><tspan x="523.33319" y="335.85892">  <tspan fill="#008000" font-family="monospace" font-size="14.667px" font-weight="bold">struct</tspan> kunit_case *test_cases;</tspan><tspan x="523.33319" y="354.19229">  ...</tspan><tspan x="523.33319" y="372.52567">};</tspan></text>
+	</g>
+</svg>
diff --git a/Documentation/dev-tools/kunit/run_manual.rst b/Documentation/dev-tools/kunit/run_manual.rst
new file mode 100644
index 000000000000..e7b46421f247
--- /dev/null
+++ b/Documentation/dev-tools/kunit/run_manual.rst
@@ -0,0 +1,57 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================
+Run Tests without kunit_tool
+============================
+
+If we do not want to use kunit_tool (For example: we want to integrate
+with other systems, or run tests on real hardware), we can
+include KUnit in any kernel, read out results, and parse manually.
+
+.. note:: KUnit is not designed for use in a production system. It is
+          possible that tests may reduce the stability or security of
+          the system.
+
+Configure the Kernel
+====================
+
+KUnit tests can run without kunit_tool. This can be useful, if:
+
+- We have an existing kernel configuration to test.
+- Need to run on real hardware (or using an emulator/VM kunit_tool
+  does not support).
+- Wish to integrate with some existing testing systems.
+
+KUnit is configured with the ``CONFIG_KUNIT`` option, and individual
+tests can also be built by enabling their config options in our
+``.config``. KUnit tests usually (but don't always) have config options
+ending in ``_KUNIT_TEST``. Most tests can either be built as a module,
+or be built into the kernel.
+
+.. note ::
+
+	We can enable the ``KUNIT_ALL_TESTS`` config option to
+	automatically enable all tests with satisfied dependencies. This is
+	a good way of quickly testing everything applicable to the current
+	config.
+
+Once we have built our kernel (and/or modules), it is simple to run
+the tests. If the tests are built-in, they will run automatically on the
+kernel boot. The results will be written to the kernel log (``dmesg``)
+in TAP format.
+
+If the tests are built as modules, they will run when the module is
+loaded.
+
+.. code-block :: bash
+
+	# modprobe example-test
+
+The results will appear in TAP format in ``dmesg``.
+
+.. note ::
+
+	If ``CONFIG_KUNIT_DEBUGFS`` is enabled, KUnit test results will
+	be accessible from the ``debugfs`` filesystem (if mounted).
+	They will be in ``/sys/kernel/debug/kunit/<test_suite>/results``, in
+	TAP format.
diff --git a/Documentation/dev-tools/kunit/run_wrapper.rst b/Documentation/dev-tools/kunit/run_wrapper.rst
new file mode 100644
index 000000000000..dafe8eb28d30
--- /dev/null
+++ b/Documentation/dev-tools/kunit/run_wrapper.rst
@@ -0,0 +1,323 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+Running tests with kunit_tool
+=============================
+
+We can either run KUnit tests using kunit_tool or can run tests
+manually, and then use kunit_tool to parse the results. To run tests
+manually, see: Documentation/dev-tools/kunit/run_manual.rst.
+As long as we can build the kernel, we can run KUnit.
+
+kunit_tool is a Python script which configures and builds a kernel, runs
+tests, and formats the test results.
+
+Run command:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py run
+
+We should see the following:
+
+.. code-block::
+
+	Configuring KUnit Kernel ...
+	Building KUnit kernel...
+	Starting KUnit kernel...
+
+We may want to use the following options:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all`
+
+- ``--timeout`` sets a maximum amount of time for tests to run.
+- ``--jobs`` sets the number of threads to build the kernel.
+
+kunit_tool will generate a ``.kunitconfig`` with a default
+configuration, if no other ``.kunitconfig`` file exists
+(in the build directory). In addition, it verifies that the
+generated ``.config`` file contains the ``CONFIG`` options in the
+``.kunitconfig``.
+It is also possible to pass a separate ``.kunitconfig`` fragment to
+kunit_tool. This is useful if we have several different groups of
+tests we want to run independently, or if we want to use pre-defined
+test configs for certain subsystems.
+
+To use a different ``.kunitconfig`` file (such as one
+provided to test a particular subsystem), pass it as an option:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4/.kunitconfig
+
+To view kunit_tool flags (optional command-line arguments), run:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py run --help
+
+Creating a ``.kunitconfig`` file
+================================
+
+If we want to run a specific set of tests (rather than those listed
+in the KUnit ``defconfig``), we can provide Kconfig options in the
+``.kunitconfig`` file. For default .kunitconfig, see:
+https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/tools/testing/kunit/configs/default.config.
+A ``.kunitconfig`` is a ``minconfig`` (a .config
+generated by running ``make savedefconfig``), used for running a
+specific set of tests. This file contains the regular Kernel configs
+with specific test targets. The ``.kunitconfig`` also
+contains any other config options required by the tests (For example:
+dependencies for features under tests, configs that enable/disable
+certain code blocks, arch configs and so on).
+
+To create a ``.kunitconfig``, using the KUnit ``defconfig``:
+
+.. code-block::
+
+	cd $PATH_TO_LINUX_REPO
+	cp tools/testing/kunit/configs/default.config .kunit/.kunitconfig
+
+We can then add any other Kconfig options. For example:
+
+.. code-block::
+
+	CONFIG_LIST_KUNIT_TEST=y
+
+kunit_tool ensures that all config options in ``.kunitconfig`` are
+set in the kernel ``.config`` before running the tests. It warns if we
+have not included the options dependencies.
+
+.. note:: Removing something from the ``.kunitconfig`` will
+   not rebuild the ``.config file``. The configuration is only
+   updated if the ``.kunitconfig`` is not a subset of ``.config``.
+   This means that we can use other tools
+   (For example: ``make menuconfig``) to adjust other config options.
+   The build dir needs to be set for ``make menuconfig`` to
+   work, therefore  by default use ``make O=.kunit menuconfig``.
+
+Configuring, building, and running tests
+========================================
+
+If we want to make manual changes to the KUnit build process, we
+can run part of the KUnit build process independently.
+When running kunit_tool, from a ``.kunitconfig``, we can generate a
+``.config`` by using the ``config`` argument:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py config
+
+To build a KUnit kernel from the current ``.config``, we can use the
+``build`` argument:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py build
+
+If we already have built UML kernel with built-in KUnit tests, we
+can run the kernel, and display the test results with the ``exec``
+argument:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py exec
+
+The ``run`` command discussed in section: **Running tests with kunit_tool**,
+is equivalent to running the above three commands in sequence.
+
+Parsing test results
+====================
+
+KUnit tests output displays results in TAP (Test Anything Protocol)
+format. When running tests, kunit_tool parses this output and prints
+a summary. To see the raw test results in TAP format, we can pass the
+``--raw_output`` argument:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py run --raw_output
+
+If we have KUnit results in the raw TAP format, we can parse them and
+print the human-readable summary with the ``parse`` command for
+kunit_tool. This accepts a filename for an argument, or will read from
+standard input.
+
+.. code-block:: bash
+
+	# Reading from a file
+	./tools/testing/kunit/kunit.py parse /var/log/dmesg
+	# Reading from stdin
+	dmesg | ./tools/testing/kunit/kunit.py parse
+
+Filtering tests
+===============
+
+By passing a bash style glob filter to the ``exec`` or ``run``
+commands, we can run a subset of the tests built into a kernel . For
+example: if we only want to run KUnit resource tests, use:
+
+.. code-block::
+
+	./tools/testing/kunit/kunit.py run 'kunit-resource*'
+
+This uses the standard glob format with wildcard characters.
+
+.. _kunit-on-qemu:
+
+Running tests on QEMU
+=====================
+
+kunit_tool supports running tests on  qemu as well as
+via UML. To run tests on qemu, by default it requires two flags:
+
+- ``--arch``: Selects a configs collection (Kconfig, qemu config options
+  and so on), that allow KUnit tests to be run on the specified
+  architecture in a minimal way. The architecture argument is same as
+  the option name passed to the ``ARCH`` variable used by Kbuild.
+  Not all architectures currently support this flag, but we can use
+  ``--qemu_config`` to handle it. If ``um`` is passed (or this flag
+  is ignored), the tests will run via UML. Non-UML architectures,
+  for example: i386, x86_64, arm and so on; run on qemu.
+
+- ``--cross_compile``: Specifies the Kbuild toolchain. It passes the
+  same argument as passed to the ``CROSS_COMPILE`` variable used by
+  Kbuild. As a reminder, this will be the prefix for the toolchain
+  binaries such as GCC. For example:
+
+  - ``sparc64-linux-gnu`` if we have the sparc toolchain installed on
+    our system.
+
+  - ``$HOME/toolchains/microblaze/gcc-9.2.0-nolibc/microblaze-linux/bin/microblaze-linux``
+    if we have downloaded the microblaze toolchain from the 0-day
+    website to a directory in our home directory called toolchains.
+
+This means that for most architectures, running under qemu is as simple as:
+
+.. code-block:: bash
+
+	./tools/testing/kunit/kunit.py run --arch=x86_64
+
+When cross-compiling, we'll likely need to specify a different toolchain, for
+example:
+
+.. code-block:: bash
+
+	./tools/testing/kunit/kunit.py run \
+		--arch=s390 \
+		--cross_compile=s390x-linux-gnu-
+
+If we want to run KUnit tests on an architecture not supported by
+the ``--arch`` flag, or want to run KUnit tests on qemu using a
+non-default configuration; then we can write our own``QemuConfig``.
+These ``QemuConfigs`` are written in Python. They have an import line
+``from..qemu_config import QemuArchParams`` at the top of the file.
+The file must contain a variable called ``QEMU_ARCH`` that has an
+instance of ``QemuArchParams`` assigned to it. See example in:
+``tools/testing/kunit/qemu_configs/x86_64.py``.
+
+Once we have a ``QemuConfig``, we can pass it into kunit_tool,
+using the ``--qemu_config`` flag. When used, this flag replaces the
+``--arch`` flag. For example: using
+``tools/testing/kunit/qemu_configs/x86_64.py``, the invocation appear
+as
+
+.. code-block:: bash
+
+	./tools/testing/kunit/kunit.py run \
+		--timeout=60 \
+		--jobs=12 \
+		--qemu_config=./tools/testing/kunit/qemu_configs/x86_64.py
+
+Running command-line arguments
+==============================
+
+kunit_tool has a number of other command-line arguments which can
+be useful for our test environment. Below are the most commonly used
+command line arguments:
+
+- ``--help``: Lists all available options. To list common options,
+  place ``--help`` before the command. To list options specific to that
+  command, place ``--help`` after the command.
+
+  .. note:: Different commands (``config``, ``build``, ``run``, etc)
+            have different supported options.
+- ``--build_dir``: Specifies kunit_tool build directory. It includes
+  the ``.kunitconfig``, ``.config`` files and compiled kernel.
+
+- ``--make_options``: Specifies additional options to pass to make, when
+  compiling a kernel (using ``build`` or ``run`` commands). For example:
+  to enable compiler warnings, we can pass ``--make_options W=1``.
+
+- ``--alltests``: Enable a predefined set of options in order to build
+  as many tests as possible.
+
+  .. note:: The list of enabled options can be found in
+            ``tools/testing/kunit/configs/all_tests.config``.
+
+            If you only want to enable all tests with otherwise satisfied
+            dependencies, instead add ``CONFIG_KUNIT_ALL_TESTS=y`` to your
+            ``.kunitconfig``.
+
+- ``--kunitconfig``: Specifies the path or the directory of the ``.kunitconfig``
+  file. For example:
+
+  - ``lib/kunit/.kunitconfig`` can be the path of the file.
+
+  - ``lib/kunit`` can be the directory in which the file is located.
+
+  This file is used to build and run with a predefined set of tests
+  and their dependencies. For example, to run tests for a given subsystem.
+
+- ``--kconfig_add``: Specifies additional configuration options to be
+  appended to the ``.kunitconfig`` file. For example:
+
+  .. code-block::
+
+	./tools/testing/kunit/kunit.py run --kconfig_add CONFIG_KASAN=y
+
+- ``--arch``: Runs tests on the specified architecture. The architecture
+  argument is same as the Kbuild ARCH environment variable.
+  For example, i386, x86_64, arm, um, etc. Non-UML architectures run on qemu.
+  Default is `um`.
+
+- ``--cross_compile``: Specifies the Kbuild toolchain. It passes the
+  same argument as passed to the ``CROSS_COMPILE`` variable used by
+  Kbuild. This will be the prefix for the toolchain
+  binaries such as GCC. For example:
+
+  - ``sparc64-linux-gnu-`` if we have the sparc toolchain installed on
+    our system.
+
+  - ``$HOME/toolchains/microblaze/gcc-9.2.0-nolibc/microblaze-linux/bin/microblaze-linux``
+    if we have downloaded the microblaze toolchain from the 0-day
+    website to a specified path in our home directory called toolchains.
+
+- ``--qemu_config``: Specifies the path to a file containing a
+  custom qemu architecture definition. This should be a python file
+  containing a `QemuArchParams` object.
+
+- ``--qemu_args``: Specifies additional qemu arguments, for example, ``-smp 8``.
+
+- ``--jobs``: Specifies the number of jobs (commands) to run simultaneously.
+  By default, this is set to the number of cores on your system.
+
+- ``--timeout``: Specifies the maximum number of seconds allowed for all tests to run.
+  This does not include the time taken to build the tests.
+
+- ``--kernel_args``: Specifies additional kernel command-line arguments. May be repeated.
+
+- ``--run_isolated``: If set, boots the kernel for each individual suite/test.
+  This is useful for debugging a non-hermetic test, one that
+  might pass/fail based on what ran before it.
+
+- ``--raw_output``: If set, generates unformatted output from kernel. Possible options are:
+
+   - ``all``: To view the full kernel output, use ``--raw_output=all``.
+
+   - ``kunit``: This is the default option and filters to KUnit output. Use ``--raw_output`` or ``--raw_output=kunit``.
+
+- ``--json``: If set, stores the test results in a JSON format and prints to `stdout` or
+  saves to a file if a filename is specified.
diff --git a/Documentation/dev-tools/kunit/running_tips.rst b/Documentation/dev-tools/kunit/running_tips.rst
index 30d2147eb5b5..8e8c493f17d1 100644
--- a/Documentation/dev-tools/kunit/running_tips.rst
+++ b/Documentation/dev-tools/kunit/running_tips.rst
@@ -15,7 +15,7 @@ It can be handy to create a bash function like:
 .. code-block:: bash
 
 	function run_kunit() {
-	  ( cd "$(git rev-parse --show-toplevel)" && ./tools/testing/kunit/kunit.py run $@ )
+	  ( cd "$(git rev-parse --show-toplevel)" && ./tools/testing/kunit/kunit.py run "$@" )
 	}
 
 .. note::
@@ -25,8 +25,8 @@ It can be handy to create a bash function like:
 Running a subset of tests
 -------------------------
 
-``kunit.py run`` accepts an optional glob argument to filter tests. Currently
-this only matches against suite names, but this may change in the future.
+``kunit.py run`` accepts an optional glob argument to filter tests. The format
+is ``"<suite_glob>[.test_glob]"``.
 
 Say that we wanted to run the sysctl tests, we could do so via:
 
@@ -35,6 +35,13 @@ Say that we wanted to run the sysctl tests, we could do so via:
 	$ echo -e 'CONFIG_KUNIT=y\nCONFIG_KUNIT_ALL_TESTS=y' > .kunit/.kunitconfig
 	$ ./tools/testing/kunit/kunit.py run 'sysctl*'
 
+We can filter down to just the "write" tests via:
+
+.. code-block:: bash
+
+	$ echo -e 'CONFIG_KUNIT=y\nCONFIG_KUNIT_ALL_TESTS=y' > .kunit/.kunitconfig
+	$ ./tools/testing/kunit/kunit.py run 'sysctl*.*write*'
+
 We're paying the cost of building more tests than we need this way, but it's
 easier than fiddling with ``.kunitconfig`` files or commenting out
 ``kunit_suite``'s.
@@ -107,6 +114,7 @@ Instead of enabling ``CONFIG_GCOV_KERNEL=y``, we can set these options:
 
 	CONFIG_DEBUG_KERNEL=y
 	CONFIG_DEBUG_INFO=y
+	CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 	CONFIG_GCOV=y
 
 
@@ -115,8 +123,7 @@ Putting it together into a copy-pastable sequence of commands:
 .. code-block:: bash
 
 	# Append coverage options to the current config
-	$ echo -e "CONFIG_DEBUG_KERNEL=y\nCONFIG_DEBUG_INFO=y\nCONFIG_GCOV=y" >> .kunit/.kunitconfig
-	$ ./tools/testing/kunit/kunit.py run
+	$ ./tools/testing/kunit/kunit.py run --kunitconfig=.kunit/ --kunitconfig=tools/testing/kunit/configs/coverage_uml.config
 	# Extract the coverage information from the build dir (.kunit/)
 	$ lcov -t "my_kunit_tests" -o coverage.info -c -d .kunit/
 
diff --git a/Documentation/dev-tools/kunit/start.rst b/Documentation/dev-tools/kunit/start.rst
index 1e00f9226f74..c736613c9b19 100644
--- a/Documentation/dev-tools/kunit/start.rst
+++ b/Documentation/dev-tools/kunit/start.rst
@@ -4,132 +4,190 @@
 Getting Started
 ===============
 
-Installing dependencies
-=======================
-KUnit has the same dependencies as the Linux kernel. As long as you can build
-the kernel, you can run KUnit.
+This page contains an overview of the kunit_tool and KUnit framework,
+teaching how to run existing tests and then how to write a simple test case,
+and covers common problems users face when using KUnit for the first time.
 
-Running tests with the KUnit Wrapper
-====================================
-Included with KUnit is a simple Python wrapper which runs tests under User Mode
-Linux, and formats the test results.
+Installing Dependencies
+=======================
+KUnit has the same dependencies as the Linux kernel. As long as you can
+build the kernel, you can run KUnit.
 
-The wrapper can be run with:
+Running tests with kunit_tool
+=============================
+kunit_tool is a Python script, which configures and builds a kernel, runs
+tests, and formats the test results. From the kernel repository, you
+can run kunit_tool:
 
 .. code-block:: bash
 
 	./tools/testing/kunit/kunit.py run
 
-For more information on this wrapper (also called kunit_tool) check out the
-Documentation/dev-tools/kunit/kunit-tool.rst page.
+.. note ::
+	You may see the following error:
+	"The source tree is not clean, please run 'make ARCH=um mrproper'"
 
-Creating a .kunitconfig
------------------------
-If you want to run a specific set of tests (rather than those listed in the
-KUnit defconfig), you can provide Kconfig options in the ``.kunitconfig`` file.
-This file essentially contains the regular Kernel config, with the specific
-test targets as well. The ``.kunitconfig`` should also contain any other config
-options required by the tests.
+	This happens because internally kunit.py specifies ``.kunit``
+	(default option) as the build directory in the command ``make O=output/dir``
+	through the argument ``--build_dir``.  Hence, before starting an
+	out-of-tree build, the source tree must be clean.
 
-A good starting point for a ``.kunitconfig`` is the KUnit defconfig:
+	There is also the same caveat mentioned in the "Build directory for
+	the kernel" section of the :doc:`admin-guide </admin-guide/README>`,
+	that is, its use, it must be used for all invocations of ``make``.
+	The good news is that it can indeed be solved by running
+	``make ARCH=um mrproper``, just be aware that this will delete the
+	current configuration and all generated files.
 
-.. code-block:: bash
+If everything worked correctly, you should see the following:
 
-	cd $PATH_TO_LINUX_REPO
-	cp tools/testing/kunit/configs/default.config .kunitconfig
+.. code-block::
 
-You can then add any other Kconfig options you wish, e.g.:
+	Configuring KUnit Kernel ...
+	Building KUnit Kernel ...
+	Starting KUnit Kernel ...
 
-.. code-block:: none
+The tests will pass or fail.
 
-	CONFIG_LIST_KUNIT_TEST=y
+.. note ::
+   Because it is building a lot of sources for the first time,
+   the ``Building KUnit Kernel`` step may take a while.
 
-:doc:`kunit_tool <kunit-tool>` will ensure that all config options set in
-``.kunitconfig`` are set in the kernel ``.config`` before running the tests.
-It'll warn you if you haven't included the dependencies of the options you're
-using.
+For detailed information on this wrapper, see:
+Documentation/dev-tools/kunit/run_wrapper.rst.
 
-.. note::
-   Note that removing something from the ``.kunitconfig`` will not trigger a
-   rebuild of the ``.config`` file: the configuration is only updated if the
-   ``.kunitconfig`` is not a subset of ``.config``. This means that you can use
-   other tools (such as make menuconfig) to adjust other config options.
+Selecting which tests to run
+----------------------------
 
+By default, kunit_tool runs all tests reachable with minimal configuration,
+that is, using default values for most of the kconfig options.  However,
+you can select which tests to run by:
 
-Running the tests (KUnit Wrapper)
----------------------------------
+- `Customizing Kconfig`_ used to compile the kernel, or
+- `Filtering tests by name`_ to select specifically which compiled tests to run.
 
-To make sure that everything is set up correctly, simply invoke the Python
-wrapper from your kernel repo:
+Customizing Kconfig
+~~~~~~~~~~~~~~~~~~~
+A good starting point for the ``.kunitconfig`` is the KUnit default config.
+If you didn't run ``kunit.py run`` yet, you can generate it by running:
 
 .. code-block:: bash
 
-	./tools/testing/kunit/kunit.py run
+	cd $PATH_TO_LINUX_REPO
+	tools/testing/kunit/kunit.py config
+	cat .kunit/.kunitconfig
 
-.. note::
-   You may want to run ``make mrproper`` first.
+.. note ::
+   ``.kunitconfig`` lives in the ``--build_dir`` used by kunit.py, which is
+   ``.kunit`` by default.
 
-If everything worked correctly, you should see the following:
+Before running the tests, kunit_tool ensures that all config options
+set in ``.kunitconfig`` are set in the kernel ``.config``. It will warn
+you if you have not included dependencies for the options used.
 
-.. code-block:: bash
+There are many ways to customize the configurations:
 
-	Generating .config ...
-	Building KUnit Kernel ...
-	Starting KUnit Kernel ...
+a. Edit ``.kunit/.kunitconfig``. The file should contain the list of kconfig
+   options required to run the desired tests, including their dependencies.
+   You may want to remove CONFIG_KUNIT_ALL_TESTS from the ``.kunitconfig`` as
+   it will enable a number of additional tests that you may not want.
+   If you need to run on an architecture other than UML see :ref:`kunit-on-qemu`.
 
-followed by a list of tests that are run. All of them should be passing.
+b. Enable additional kconfig options on top of ``.kunit/.kunitconfig``.
+   For example, to include the kernel's linked-list test you can run::
 
-.. note::
-	Because it is building a lot of sources for the first time, the
-	``Building KUnit kernel`` step may take a while.
+	./tools/testing/kunit/kunit.py run \
+		--kconfig_add CONFIG_LIST_KUNIT_TEST=y
 
-Running tests without the KUnit Wrapper
-=======================================
+c. Provide the path of one or more .kunitconfig files from the tree.
+   For example, to run only ``FAT_FS`` and ``EXT4`` tests you can run::
 
-If you'd rather not use the KUnit Wrapper (if, for example, you need to
-integrate with other systems, or use an architecture other than UML), KUnit can
-be included in any kernel, and the results read out and parsed manually.
+	./tools/testing/kunit/kunit.py run \
+		--kunitconfig ./fs/fat/.kunitconfig \
+		--kunitconfig ./fs/ext4/.kunitconfig
 
-.. note::
-   KUnit is not designed for use in a production system, and it's possible that
-   tests may reduce the stability or security of the system.
+d. If you change the ``.kunitconfig``, kunit.py will trigger a rebuild of the
+   ``.config`` file. But you can edit the ``.config`` file directly or with
+   tools like ``make menuconfig O=.kunit``. As long as its a superset of
+   ``.kunitconfig``, kunit.py won't overwrite your changes.
 
 
+.. note ::
 
-Configuring the kernel
-----------------------
+	To save a .kunitconfig after finding a satisfactory configuration::
 
-In order to enable KUnit itself, you simply need to enable the ``CONFIG_KUNIT``
-Kconfig option (it's under Kernel Hacking/Kernel Testing and Coverage in
-menuconfig). From there, you can enable any KUnit tests you want: they usually
-have config options ending in ``_KUNIT_TEST``.
+		make savedefconfig O=.kunit
+		cp .kunit/defconfig .kunit/.kunitconfig
 
-KUnit and KUnit tests can be compiled as modules: in this case the tests in a
-module will be run when the module is loaded.
+Filtering tests by name
+~~~~~~~~~~~~~~~~~~~~~~~
+If you want to be more specific than Kconfig can provide, it is also possible
+to select which tests to execute at boot-time by passing a glob filter
+(read instructions regarding the pattern in the manpage :manpage:`glob(7)`).
+If there is a ``"."`` (period) in the filter, it will be interpreted as a
+separator between the name of the test suite and the test case,
+otherwise, it will be interpreted as the name of the test suite.
+For example, let's assume we are using the default config:
 
+a. inform the name of a test suite, like ``"kunit_executor_test"``,
+   to run every test case it contains::
 
-Running the tests (w/o KUnit Wrapper)
--------------------------------------
+	./tools/testing/kunit/kunit.py run "kunit_executor_test"
+
+b. inform the name of a test case prefixed by its test suite,
+   like ``"example.example_simple_test"``, to run specifically that test case::
+
+	./tools/testing/kunit/kunit.py run "example.example_simple_test"
+
+c. use wildcard characters (``*?[``) to run any test case that matches the pattern,
+   like ``"*.*64*"`` to run test cases containing ``"64"`` in the name inside
+   any test suite::
+
+	./tools/testing/kunit/kunit.py run "*.*64*"
+
+Running Tests without the KUnit Wrapper
+=======================================
+If you do not want to use the KUnit Wrapper (for example: you want code
+under test to integrate with other systems, or use a different/
+unsupported architecture or configuration), KUnit can be included in
+any kernel, and the results are read out and parsed manually.
+
+.. note ::
+   ``CONFIG_KUNIT`` should not be enabled in a production environment.
+   Enabling KUnit disables Kernel Address-Space Layout Randomization
+   (KASLR), and tests may affect the state of the kernel in ways not
+   suitable for production.
+
+Configuring the Kernel
+----------------------
+To enable KUnit itself, you need to enable the ``CONFIG_KUNIT`` Kconfig
+option (under Kernel Hacking/Kernel Testing and Coverage in
+``menuconfig``). From there, you can enable any KUnit tests. They
+usually have config options ending in ``_KUNIT_TEST``.
 
-Build and run your kernel as usual. Test output will be written to the kernel
-log in `TAP <https://testanything.org/>`_ format.
+KUnit and KUnit tests can be compiled as modules. The tests in a module
+will run when the module is loaded.
 
-.. note::
-   It's possible that there will be other lines and/or data interspersed in the
-   TAP output.
+Running Tests (without KUnit Wrapper)
+-------------------------------------
+Build and run your kernel. In the kernel log, the test output is printed
+out in the TAP format. This will only happen by default if KUnit/tests
+are built-in. Otherwise the module will need to be loaded.
 
+.. note ::
+   Some lines and/or data may get interspersed in the TAP output.
 
-Writing your first test
+Writing Your First Test
 =======================
+In your kernel repository, let's add some code that we can test.
 
-In your kernel repo let's add some code that we can test. Create a file
-``drivers/misc/example.h`` with the contents:
+1. Create a file ``drivers/misc/example.h``, which includes:
 
 .. code-block:: c
 
 	int misc_example_add(int left, int right);
 
-create a file ``drivers/misc/example.c``:
+2. Create a file ``drivers/misc/example.c``, which includes:
 
 .. code-block:: c
 
@@ -142,21 +200,22 @@ create a file ``drivers/misc/example.c``:
 		return left + right;
 	}
 
-Now add the following lines to ``drivers/misc/Kconfig``:
+3. Add the following lines to ``drivers/misc/Kconfig``:
 
 .. code-block:: kconfig
 
 	config MISC_EXAMPLE
 		bool "My example"
 
-and the following lines to ``drivers/misc/Makefile``:
+4. Add the following lines to ``drivers/misc/Makefile``:
 
 .. code-block:: make
 
 	obj-$(CONFIG_MISC_EXAMPLE) += example.o
 
-Now we are ready to write the test. The test will be in
-``drivers/misc/example-test.c``:
+Now we are ready to write the test cases.
+
+1. Add the below test case in ``drivers/misc/example_test.c``:
 
 .. code-block:: c
 
@@ -191,7 +250,7 @@ Now we are ready to write the test. The test will be in
 	};
 	kunit_test_suite(misc_example_test_suite);
 
-Now add the following to ``drivers/misc/Kconfig``:
+2. Add the following lines to ``drivers/misc/Kconfig``:
 
 .. code-block:: kconfig
 
@@ -200,20 +259,20 @@ Now add the following to ``drivers/misc/Kconfig``:
 		depends on MISC_EXAMPLE && KUNIT=y
 		default KUNIT_ALL_TESTS
 
-and the following to ``drivers/misc/Makefile``:
+3. Add the following lines to ``drivers/misc/Makefile``:
 
 .. code-block:: make
 
-	obj-$(CONFIG_MISC_EXAMPLE_TEST) += example-test.o
+	obj-$(CONFIG_MISC_EXAMPLE_TEST) += example_test.o
 
-Now add it to your ``.kunitconfig``:
+4. Add the following lines to ``.kunit/.kunitconfig``:
 
 .. code-block:: none
 
 	CONFIG_MISC_EXAMPLE=y
 	CONFIG_MISC_EXAMPLE_TEST=y
 
-Now you can run the test:
+5. Run the test:
 
 .. code-block:: bash
 
@@ -227,16 +286,19 @@ You should see the following failure:
 	[16:08:57] [PASSED] misc-example:misc_example_add_test_basic
 	[16:08:57] [FAILED] misc-example:misc_example_test_failure
 	[16:08:57] EXPECTATION FAILED at drivers/misc/example-test.c:17
-	[16:08:57] 	This test never passes.
+	[16:08:57]      This test never passes.
 	...
 
-Congrats! You just wrote your first KUnit test!
+Congrats! You just wrote your first KUnit test.
 
 Next Steps
 ==========
-*   Check out the Documentation/dev-tools/kunit/tips.rst page for tips on
-    writing idiomatic KUnit tests.
-*   Check out the :doc:`running_tips` page for tips on
-    how to make running KUnit tests easier.
-*   Optional: see the :doc:`usage` page for a more
-    in-depth explanation of KUnit.
+
+If you're interested in using some of the more advanced features of kunit.py,
+take a look at Documentation/dev-tools/kunit/run_wrapper.rst
+
+If you'd like to run tests without using kunit.py, check out
+Documentation/dev-tools/kunit/run_manual.rst
+
+For more information on writing KUnit tests (including some common techniques
+for testing different things), see Documentation/dev-tools/kunit/usage.rst
diff --git a/Documentation/dev-tools/kunit/style.rst b/Documentation/dev-tools/kunit/style.rst
index 8dbcdc552606..b6d0d7359f00 100644
--- a/Documentation/dev-tools/kunit/style.rst
+++ b/Documentation/dev-tools/kunit/style.rst
@@ -4,37 +4,36 @@
 Test Style and Nomenclature
 ===========================
 
-To make finding, writing, and using KUnit tests as simple as possible, it's
+To make finding, writing, and using KUnit tests as simple as possible, it is
 strongly encouraged that they are named and written according to the guidelines
-below. While it's possible to write KUnit tests which do not follow these rules,
+below. While it is possible to write KUnit tests which do not follow these rules,
 they may break some tooling, may conflict with other tests, and may not be run
 automatically by testing systems.
 
-It's recommended that you only deviate from these guidelines when:
+It is recommended that you only deviate from these guidelines when:
 
-1. Porting tests to KUnit which are already known with an existing name, or
-2. Writing tests which would cause serious problems if automatically run (e.g.,
-   non-deterministically producing false positives or negatives, or taking an
-   extremely long time to run).
+1. Porting tests to KUnit which are already known with an existing name.
+2. Writing tests which would cause serious problems if automatically run. For
+   example, non-deterministically producing false positives or negatives, or
+   taking a long time to run.
 
 Subsystems, Suites, and Tests
 =============================
 
-In order to make tests as easy to find as possible, they're grouped into suites
-and subsystems. A test suite is a group of tests which test a related area of
-the kernel, and a subsystem is a set of test suites which test different parts
-of the same kernel subsystem or driver.
+To make tests easy to find, they are grouped into suites and subsystems. A test
+suite is a group of tests which test a related area of the kernel. A subsystem
+is a set of test suites which test different parts of a kernel subsystem
+or a driver.
 
 Subsystems
 ----------
 
 Every test suite must belong to a subsystem. A subsystem is a collection of one
 or more KUnit test suites which test the same driver or part of the kernel. A
-rule of thumb is that a test subsystem should match a single kernel module. If
-the code being tested can't be compiled as a module, in many cases the subsystem
-should correspond to a directory in the source tree or an entry in the
-MAINTAINERS file. If unsure, follow the conventions set by tests in similar
-areas.
+test subsystem should match a single kernel module. If the code being tested
+cannot be compiled as a module, in many cases the subsystem should correspond to
+a directory in the source tree or an entry in the ``MAINTAINERS`` file. If
+unsure, follow the conventions set by tests in similar areas.
 
 Test subsystems should be named after the code being tested, either after the
 module (wherever possible), or after the directory or files being tested. Test
@@ -42,9 +41,8 @@ subsystems should be named to avoid ambiguity where necessary.
 
 If a test subsystem name has multiple components, they should be separated by
 underscores. *Do not* include "test" or "kunit" directly in the subsystem name
-unless you are actually testing other tests or the kunit framework itself.
-
-Example subsystems could be:
+unless we are actually testing other tests or the kunit framework itself. For
+example, subsystems could be called:
 
 ``ext4``
   Matches the module and filesystem name.
@@ -56,48 +54,46 @@ Example subsystems could be:
   Has several components (``snd``, ``hda``, ``codec``, ``hdmi``) separated by
   underscores. Matches the module name.
 
-Avoid names like these:
+Avoid names as shown in examples below:
 
 ``linear-ranges``
   Names should use underscores, not dashes, to separate words. Prefer
   ``linear_ranges``.
 ``qos-kunit-test``
-  As well as using underscores, this name should not have "kunit-test" as a
-  suffix, and ``qos`` is ambiguous as a subsystem name. ``power_qos`` would be a
-  better name.
+  This name should use underscores, and not have "kunit-test" as a
+  suffix. ``qos`` is also ambiguous as a subsystem name, because several parts
+  of the kernel have a ``qos`` subsystem. ``power_qos`` would be a better name.
 ``pc_parallel_port``
   The corresponding module name is ``parport_pc``, so this subsystem should also
   be named ``parport_pc``.
 
 .. note::
-        The KUnit API and tools do not explicitly know about subsystems. They're
-        simply a way of categorising test suites and naming modules which
-        provides a simple, consistent way for humans to find and run tests. This
-        may change in the future, though.
+        The KUnit API and tools do not explicitly know about subsystems. They are
+        a way of categorizing test suites and naming modules which provides a
+        simple, consistent way for humans to find and run tests. This may change
+        in the future.
 
 Suites
 ------
 
 KUnit tests are grouped into test suites, which cover a specific area of
-functionality being tested. Test suites can have shared initialisation and
-shutdown code which is run for all tests in the suite.
-Not all subsystems will need to be split into multiple test suites (e.g. simple drivers).
+functionality being tested. Test suites can have shared initialization and
+shutdown code which is run for all tests in the suite. Not all subsystems need
+to be split into multiple test suites (for example, simple drivers).
 
 Test suites are named after the subsystem they are part of. If a subsystem
 contains several suites, the specific area under test should be appended to the
 subsystem name, separated by an underscore.
 
 In the event that there are multiple types of test using KUnit within a
-subsystem (e.g., both unit tests and integration tests), they should be put into
-separate suites, with the type of test as the last element in the suite name.
-Unless these tests are actually present, avoid using ``_test``, ``_unittest`` or
-similar in the suite name.
+subsystem (for example, both unit tests and integration tests), they should be
+put into separate suites, with the type of test as the last element in the suite
+name. Unless these tests are actually present, avoid using ``_test``, ``_unittest``
+or similar in the suite name.
 
 The full test suite name (including the subsystem name) should be specified as
 the ``.name`` member of the ``kunit_suite`` struct, and forms the base for the
-module name (see below).
-
-Example test suites could include:
+module name. For example, test suites could include:
 
 ``ext4_inode``
   Part of the ``ext4`` subsystem, testing the ``inode`` area.
@@ -109,26 +105,27 @@ Example test suites could include:
   The ``kasan`` subsystem has only one suite, so the suite name is the same as
   the subsystem name.
 
-Avoid names like:
+Avoid names, for example:
 
 ``ext4_ext4_inode``
-  There's no reason to state the subsystem twice.
+  There is no reason to state the subsystem twice.
 ``property_entry``
   The suite name is ambiguous without the subsystem name.
 ``kasan_integration_test``
   Because there is only one suite in the ``kasan`` subsystem, the suite should
-  just be called ``kasan``. There's no need to redundantly add
-  ``integration_test``. Should a separate test suite with, for example, unit
-  tests be added, then that suite could be named ``kasan_unittest`` or similar.
+  just be called as ``kasan``. Do not redundantly add
+  ``integration_test``. It should be a separate test suite. For example, if the
+  unit tests are added, then that suite could be named as ``kasan_unittest`` or
+  similar.
 
 Test Cases
 ----------
 
 Individual tests consist of a single function which tests a constrained
-codepath, property, or function. In the test output, individual tests' results
-will show up as subtests of the suite's results.
+codepath, property, or function. In the test output, an individual test's
+results will show up as subtests of the suite's results.
 
-Tests should be named after what they're testing. This is often the name of the
+Tests should be named after what they are testing. This is often the name of the
 function being tested, with a description of the input or codepath being tested.
 As tests are C functions, they should be named and written in accordance with
 the kernel coding style.
@@ -136,7 +133,7 @@ the kernel coding style.
 .. note::
         As tests are themselves functions, their names cannot conflict with
         other C identifiers in the kernel. This may require some creative
-        naming. It's a good idea to make your test functions `static` to avoid
+        naming. It is a good idea to make your test functions `static` to avoid
         polluting the global namespace.
 
 Example test names include:
@@ -162,16 +159,16 @@ This Kconfig entry must:
 * be named ``CONFIG_<name>_KUNIT_TEST``: where <name> is the name of the test
   suite.
 * be listed either alongside the config entries for the driver/subsystem being
-  tested, or be under [Kernel Hacking]→[Kernel Testing and Coverage]
-* depend on ``CONFIG_KUNIT``
+  tested, or be under [Kernel Hacking]->[Kernel Testing and Coverage]
+* depend on ``CONFIG_KUNIT``.
 * be visible only if ``CONFIG_KUNIT_ALL_TESTS`` is not enabled.
 * have a default value of ``CONFIG_KUNIT_ALL_TESTS``.
-* have a brief description of KUnit in the help text
+* have a brief description of KUnit in the help text.
 
-Unless there's a specific reason not to (e.g. the test is unable to be built as
-a module), Kconfig entries for tests should be tristate.
+If we are not able to meet above conditions (for example, the test is unable to
+be built as a module), Kconfig entries for tests should be tristate.
 
-An example Kconfig entry:
+For example, a Kconfig entry might look like:
 
 .. code-block:: none
 
@@ -182,8 +179,8 @@ An example Kconfig entry:
 		help
 		  This builds unit tests for foo.
 
-		  For more information on KUnit and unit tests in general, please refer
-		  to the KUnit documentation in Documentation/dev-tools/kunit/.
+		  For more information on KUnit and unit tests in general,
+		  please refer to the KUnit documentation in Documentation/dev-tools/kunit/.
 
 		  If unsure, say N.
 
diff --git a/Documentation/dev-tools/kunit/tips.rst b/Documentation/dev-tools/kunit/tips.rst
deleted file mode 100644
index 492d2ded2f5a..000000000000
--- a/Documentation/dev-tools/kunit/tips.rst
+++ /dev/null
@@ -1,190 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-============================
-Tips For Writing KUnit Tests
-============================
-
-Exiting early on failed expectations
-------------------------------------
-
-``KUNIT_EXPECT_EQ`` and friends will mark the test as failed and continue
-execution.  In some cases, it's unsafe to continue and you can use the
-``KUNIT_ASSERT`` variant to exit on failure.
-
-.. code-block:: c
-
-	void example_test_user_alloc_function(struct kunit *test)
-	{
-		void *object = alloc_some_object_for_me();
-
-		/* Make sure we got a valid pointer back. */
-		KUNIT_ASSERT_NOT_ERR_OR_NULL(test, object);
-		do_something_with_object(object);
-	}
-
-Allocating memory
------------------
-
-Where you would use ``kzalloc``, you should prefer ``kunit_kzalloc`` instead.
-KUnit will ensure the memory is freed once the test completes.
-
-This is particularly useful since it lets you use the ``KUNIT_ASSERT_EQ``
-macros to exit early from a test without having to worry about remembering to
-call ``kfree``.
-
-Example:
-
-.. code-block:: c
-
-	void example_test_allocation(struct kunit *test)
-	{
-		char *buffer = kunit_kzalloc(test, 16, GFP_KERNEL);
-		/* Ensure allocation succeeded. */
-		KUNIT_ASSERT_NOT_ERR_OR_NULL(test, buffer);
-
-		KUNIT_ASSERT_STREQ(test, buffer, "");
-	}
-
-
-Testing static functions
-------------------------
-
-If you don't want to expose functions or variables just for testing, one option
-is to conditionally ``#include`` the test file at the end of your .c file, e.g.
-
-.. code-block:: c
-
-	/* In my_file.c */
-
-	static int do_interesting_thing();
-
-	#ifdef CONFIG_MY_KUNIT_TEST
-	#include "my_kunit_test.c"
-	#endif
-
-Injecting test-only code
-------------------------
-
-Similarly to the above, it can be useful to add test-specific logic.
-
-.. code-block:: c
-
-	/* In my_file.h */
-
-	#ifdef CONFIG_MY_KUNIT_TEST
-	/* Defined in my_kunit_test.c */
-	void test_only_hook(void);
-	#else
-	void test_only_hook(void) { }
-	#endif
-
-This test-only code can be made more useful by accessing the current kunit
-test, see below.
-
-Accessing the current test
---------------------------
-
-In some cases, you need to call test-only code from outside the test file, e.g.
-like in the example above or if you're providing a fake implementation of an
-ops struct.
-There is a ``kunit_test`` field in ``task_struct``, so you can access it via
-``current->kunit_test``.
-
-Here's a slightly in-depth example of how one could implement "mocking":
-
-.. code-block:: c
-
-	#include <linux/sched.h> /* for current */
-
-	struct test_data {
-		int foo_result;
-		int want_foo_called_with;
-	};
-
-	static int fake_foo(int arg)
-	{
-		struct kunit *test = current->kunit_test;
-		struct test_data *test_data = test->priv;
-
-		KUNIT_EXPECT_EQ(test, test_data->want_foo_called_with, arg);
-		return test_data->foo_result;
-	}
-
-	static void example_simple_test(struct kunit *test)
-	{
-		/* Assume priv is allocated in the suite's .init */
-		struct test_data *test_data = test->priv;
-
-		test_data->foo_result = 42;
-		test_data->want_foo_called_with = 1;
-
-		/* In a real test, we'd probably pass a pointer to fake_foo somewhere
-		 * like an ops struct, etc. instead of calling it directly. */
-		KUNIT_EXPECT_EQ(test, fake_foo(1), 42);
-	}
-
-
-Note: here we're able to get away with using ``test->priv``, but if you wanted
-something more flexible you could use a named ``kunit_resource``, see
-Documentation/dev-tools/kunit/api/test.rst.
-
-Failing the current test
-------------------------
-
-But sometimes, you might just want to fail the current test. In that case, we
-have ``kunit_fail_current_test(fmt, args...)`` which is defined in ``<kunit/test-bug.h>`` and
-doesn't require pulling in ``<kunit/test.h>``.
-
-E.g. say we had an option to enable some extra debug checks on some data structure:
-
-.. code-block:: c
-
-	#include <kunit/test-bug.h>
-
-	#ifdef CONFIG_EXTRA_DEBUG_CHECKS
-	static void validate_my_data(struct data *data)
-	{
-		if (is_valid(data))
-			return;
-
-		kunit_fail_current_test("data %p is invalid", data);
-
-		/* Normal, non-KUnit, error reporting code here. */
-	}
-	#else
-	static void my_debug_function(void) { }
-	#endif
-
-
-Customizing error messages
---------------------------
-
-Each of the ``KUNIT_EXPECT`` and ``KUNIT_ASSERT`` macros have a ``_MSG`` variant.
-These take a format string and arguments to provide additional context to the automatically generated error messages.
-
-.. code-block:: c
-
-	char some_str[41];
-	generate_sha1_hex_string(some_str);
-
-	/* Before. Not easy to tell why the test failed. */
-	KUNIT_EXPECT_EQ(test, strlen(some_str), 40);
-
-	/* After. Now we see the offending string. */
-	KUNIT_EXPECT_EQ_MSG(test, strlen(some_str), 40, "some_str='%s'", some_str);
-
-Alternatively, one can take full control over the error message by using ``KUNIT_FAIL()``, e.g.
-
-.. code-block:: c
-
-	/* Before */
-	KUNIT_EXPECT_EQ(test, some_setup_function(), 0);
-
-	/* After: full control over the failure message. */
-	if (some_setup_function())
-		KUNIT_FAIL(test, "Failed to setup thing for testing");
-
-Next Steps
-==========
-*   Optional: see the Documentation/dev-tools/kunit/usage.rst page for a more
-    in-depth explanation of KUnit.
diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst
index 63f1bb89ebf5..9faf2b4153fc 100644
--- a/Documentation/dev-tools/kunit/usage.rst
+++ b/Documentation/dev-tools/kunit/usage.rst
@@ -1,57 +1,13 @@
 .. SPDX-License-Identifier: GPL-2.0
 
-===========
-Using KUnit
-===========
-
-The purpose of this document is to describe what KUnit is, how it works, how it
-is intended to be used, and all the concepts and terminology that are needed to
-understand it. This guide assumes a working knowledge of the Linux kernel and
-some basic knowledge of testing.
-
-For a high level introduction to KUnit, including setting up KUnit for your
-project, see Documentation/dev-tools/kunit/start.rst.
-
-Organization of this document
-=============================
-
-This document is organized into two main sections: Testing and Common Patterns.
-The first covers what unit tests are and how to use KUnit to write them. The
-second covers common testing patterns, e.g. how to isolate code and make it
-possible to unit test code that was otherwise un-unit-testable.
-
-Testing
-=======
-
-What is KUnit?
---------------
-
-"K" is short for "kernel" so "KUnit" is the "(Linux) Kernel Unit Testing
-Framework." KUnit is intended first and foremost for writing unit tests; it is
-general enough that it can be used to write integration tests; however, this is
-a secondary goal. KUnit has no ambition of being the only testing framework for
-the kernel; for example, it does not intend to be an end-to-end testing
-framework.
-
-What is Unit Testing?
----------------------
-
-A `unit test <https://martinfowler.com/bliki/UnitTest.html>`_ is a test that
-tests code at the smallest possible scope, a *unit* of code. In the C
-programming language that's a function.
-
-Unit tests should be written for all the publicly exposed functions in a
-compilation unit; so that is all the functions that are exported in either a
-*class* (defined below) or all functions which are **not** static.
-
 Writing Tests
--------------
+=============
 
 Test Cases
-~~~~~~~~~~
+----------
 
 The fundamental unit in KUnit is the test case. A test case is a function with
-the signature ``void (*)(struct kunit *test)``. It calls a function to be tested
+the signature ``void (*)(struct kunit *test)``. It calls the function under test
 and then sets *expectations* for what should happen. For example:
 
 .. code-block:: c
@@ -65,18 +21,19 @@ and then sets *expectations* for what should happen. For example:
 		KUNIT_FAIL(test, "This test never passes.");
 	}
 
-In the above example ``example_test_success`` always passes because it does
-nothing; no expectations are set, so all expectations pass. On the other hand
-``example_test_failure`` always fails because it calls ``KUNIT_FAIL``, which is
-a special expectation that logs a message and causes the test case to fail.
+In the above example, ``example_test_success`` always passes because it does
+nothing; no expectations are set, and therefore all expectations pass. On the
+other hand ``example_test_failure`` always fails because it calls ``KUNIT_FAIL``,
+which is a special expectation that logs a message and causes the test case to
+fail.
 
 Expectations
 ~~~~~~~~~~~~
-An *expectation* is a way to specify that you expect a piece of code to do
-something in a test. An expectation is called like a function. A test is made
-by setting expectations about the behavior of a piece of code under test; when
-one or more of the expectations fail, the test case fails and information about
-the failure is logged. For example:
+An *expectation* specifies that we expect a piece of code to do something in a
+test. An expectation is called like a function. A test is made by setting
+expectations about the behavior of a piece of code under test. When one or more
+expectations fail, the test case fails and information about the failure is
+logged. For example:
 
 .. code-block:: c
 
@@ -86,29 +43,28 @@ the failure is logged. For example:
 		KUNIT_EXPECT_EQ(test, 2, add(1, 1));
 	}
 
-In the above example ``add_test_basic`` makes a number of assertions about the
-behavior of a function called ``add``; the first parameter is always of type
-``struct kunit *``, which contains information about the current test context;
-the second parameter, in this case, is what the value is expected to be; the
+In the above example, ``add_test_basic`` makes a number of assertions about the
+behavior of a function called ``add``. The first parameter is always of type
+``struct kunit *``, which contains information about the current test context.
+The second parameter, in this case, is what the value is expected to be. The
 last value is what the value actually is. If ``add`` passes all of these
 expectations, the test case, ``add_test_basic`` will pass; if any one of these
 expectations fails, the test case will fail.
 
-It is important to understand that a test case *fails* when any expectation is
-violated; however, the test will continue running, potentially trying other
-expectations until the test case ends or is otherwise terminated. This is as
-opposed to *assertions* which are discussed later.
+A test case *fails* when any expectation is violated; however, the test will
+continue to run, and try other expectations until the test case ends or is
+otherwise terminated. This is as opposed to *assertions* which are discussed
+later.
 
-To learn about more expectations supported by KUnit, see
-Documentation/dev-tools/kunit/api/test.rst.
+To learn about more KUnit expectations, see Documentation/dev-tools/kunit/api/test.rst.
 
 .. note::
-   A single test case should be pretty short, pretty easy to understand,
-   focused on a single behavior.
+   A single test case should be short, easy to understand, and focused on a
+   single behavior.
 
-For example, if we wanted to properly test the add function above, we would
-create additional tests cases which would each test a different property that an
-add function should have like this:
+For example, if we want to rigorously test the ``add`` function above, create
+additional tests cases which would test each property that an ``add`` function
+should have as shown below:
 
 .. code-block:: c
 
@@ -134,56 +90,77 @@ add function should have like this:
 		KUNIT_EXPECT_EQ(test, INT_MIN, add(INT_MAX, 1));
 	}
 
-Notice how it is immediately obvious what all the properties that we are testing
-for are.
-
 Assertions
 ~~~~~~~~~~
 
-KUnit also has the concept of an *assertion*. An assertion is just like an
-expectation except the assertion immediately terminates the test case if it is
-not satisfied.
-
-For example:
+An assertion is like an expectation, except that the assertion immediately
+terminates the test case if the condition is not satisfied. For example:
 
 .. code-block:: c
 
-	static void mock_test_do_expect_default_return(struct kunit *test)
+	static void test_sort(struct kunit *test)
 	{
-		struct mock_test_context *ctx = test->priv;
-		struct mock *mock = ctx->mock;
-		int param0 = 5, param1 = -5;
-		const char *two_param_types[] = {"int", "int"};
-		const void *two_params[] = {&param0, &param1};
-		const void *ret;
-
-		ret = mock->do_expect(mock,
-				      "test_printk", test_printk,
-				      two_param_types, two_params,
-				      ARRAY_SIZE(two_params));
-		KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ret);
-		KUNIT_EXPECT_EQ(test, -4, *((int *) ret));
+		int *a, i, r = 1;
+		a = kunit_kmalloc_array(test, TEST_LEN, sizeof(*a), GFP_KERNEL);
+		KUNIT_ASSERT_NOT_ERR_OR_NULL(test, a);
+		for (i = 0; i < TEST_LEN; i++) {
+			r = (r * 725861) % 6599;
+			a[i] = r;
+		}
+		sort(a, TEST_LEN, sizeof(*a), cmpint, NULL);
+		for (i = 0; i < TEST_LEN-1; i++)
+			KUNIT_EXPECT_LE(test, a[i], a[i + 1]);
 	}
 
-In this example, the method under test should return a pointer to a value, so
-if the pointer returned by the method is null or an errno, we don't want to
-bother continuing the test since the following expectation could crash the test
-case. `ASSERT_NOT_ERR_OR_NULL(...)` allows us to bail out of the test case if
-the appropriate conditions have not been satisfied to complete the test.
+In this example, we need to be able to allocate an array to test the ``sort()``
+function. So we use ``KUNIT_ASSERT_NOT_ERR_OR_NULL()`` to abort the test if
+there's an allocation error.
+
+.. note::
+   In other test frameworks, ``ASSERT`` macros are often implemented by calling
+   ``return`` so they only work from the test function. In KUnit, we stop the
+   current kthread on failure, so you can call them from anywhere.
+
+Customizing error messages
+--------------------------
+
+Each of the ``KUNIT_EXPECT`` and ``KUNIT_ASSERT`` macros have a ``_MSG``
+variant.  These take a format string and arguments to provide additional
+context to the automatically generated error messages.
+
+.. code-block:: c
+
+	char some_str[41];
+	generate_sha1_hex_string(some_str);
+
+	/* Before. Not easy to tell why the test failed. */
+	KUNIT_EXPECT_EQ(test, strlen(some_str), 40);
+
+	/* After. Now we see the offending string. */
+	KUNIT_EXPECT_EQ_MSG(test, strlen(some_str), 40, "some_str='%s'", some_str);
+
+Alternatively, one can take full control over the error message by using
+``KUNIT_FAIL()``, e.g.
+
+.. code-block:: c
+
+	/* Before */
+	KUNIT_EXPECT_EQ(test, some_setup_function(), 0);
+
+	/* After: full control over the failure message. */
+	if (some_setup_function())
+		KUNIT_FAIL(test, "Failed to setup thing for testing");
+
 
 Test Suites
 ~~~~~~~~~~~
 
-Now obviously one unit test isn't very helpful; the power comes from having
-many test cases covering all of a unit's behaviors. Consequently it is common
-to have many *similar* tests; in order to reduce duplication in these closely
-related tests most unit testing frameworks - including KUnit - provide the
-concept of a *test suite*. A *test suite* is just a collection of test cases
-for a unit of code with a set up function that gets invoked before every test
-case and then a tear down function that gets invoked after every test case
-completes.
-
-Example:
+We need many test cases covering all the unit's behaviors. It is common to have
+many similar tests. In order to reduce duplication in these closely related
+tests, most unit testing frameworks (including KUnit) provide the concept of a
+*test suite*. A test suite is a collection of test cases for a unit of code
+with optional setup and teardown functions that run before/after the whole
+suite and/or every test case. For example:
 
 .. code-block:: c
 
@@ -198,27 +175,57 @@ Example:
 		.name = "example",
 		.init = example_test_init,
 		.exit = example_test_exit,
+		.suite_init = example_suite_init,
+		.suite_exit = example_suite_exit,
 		.test_cases = example_test_cases,
 	};
 	kunit_test_suite(example_test_suite);
 
-In the above example the test suite, ``example_test_suite``, would run the test
-cases ``example_test_foo``, ``example_test_bar``, and ``example_test_baz``;
-each would have ``example_test_init`` called immediately before it and would
-have ``example_test_exit`` called immediately after it.
-``kunit_test_suite(example_test_suite)`` registers the test suite with the
-KUnit test framework.
+In the above example, the test suite ``example_test_suite`` would first run
+``example_suite_init``, then run the test cases ``example_test_foo``,
+``example_test_bar``, and ``example_test_baz``. Each would have
+``example_test_init`` called immediately before it and ``example_test_exit``
+called immediately after it. Finally, ``example_suite_exit`` would be called
+after everything else. ``kunit_test_suite(example_test_suite)`` registers the
+test suite with the KUnit test framework.
 
 .. note::
-   A test case will only be run if it is associated with a test suite.
+   A test case will only run if it is associated with a test suite.
+
+``kunit_test_suite(...)`` is a macro which tells the linker to put the
+specified test suite in a special linker section so that it can be run by KUnit
+either after ``late_init``, or when the test module is loaded (if the test was
+built as a module).
+
+For more information, see Documentation/dev-tools/kunit/api/test.rst.
+
+.. _kunit-on-non-uml:
+
+Writing Tests For Other Architectures
+-------------------------------------
+
+It is better to write tests that run on UML to tests that only run under a
+particular architecture. It is better to write tests that run under QEMU or
+another easy to obtain (and monetarily free) software environment to a specific
+piece of hardware.
 
-``kunit_test_suite(...)`` is a macro which tells the linker to put the specified
-test suite in a special linker section so that it can be run by KUnit either
-after late_init, or when the test module is loaded (depending on whether the
-test was built in or not).
+Nevertheless, there are still valid reasons to write a test that is architecture
+or hardware specific. For example, we might want to test code that really
+belongs in ``arch/some-arch/*``. Even so, try to write the test so that it does
+not depend on physical hardware. Some of our test cases may not need hardware,
+only few tests actually require the hardware to test it. When hardware is not
+available, instead of disabling tests, we can skip them.
 
-For more information on these types of things see the
-Documentation/dev-tools/kunit/api/test.rst.
+Now that we have narrowed down exactly what bits are hardware specific, the
+actual procedure for writing and running the tests is same as writing normal
+KUnit tests.
+
+.. important::
+   We may have to reset hardware state. If this is not possible, we may only
+   be able to run one test case per invocation.
+
+.. TODO(brendanhiggins@google.com): Add an actual example of an architecture-
+   dependent KUnit test.
 
 Common Patterns
 ===============
@@ -226,43 +233,39 @@ Common Patterns
 Isolating Behavior
 ------------------
 
-The most important aspect of unit testing that other forms of testing do not
-provide is the ability to limit the amount of code under test to a single unit.
-In practice, this is only possible by being able to control what code gets run
-when the unit under test calls a function and this is usually accomplished
-through some sort of indirection where a function is exposed as part of an API
-such that the definition of that function can be changed without affecting the
-rest of the code base. In the kernel this primarily comes from two constructs,
-classes, structs that contain function pointers that are provided by the
-implementer, and architecture-specific functions which have definitions selected
-at compile time.
+Unit testing limits the amount of code under test to a single unit. It controls
+what code gets run when the unit under test calls a function. Where a function
+is exposed as part of an API such that the definition of that function can be
+changed without affecting the rest of the code base. In the kernel, this comes
+from two constructs: classes, which are structs that contain function pointers
+provided by the implementer, and architecture-specific functions, which have
+definitions selected at compile time.
 
 Classes
 ~~~~~~~
 
 Classes are not a construct that is built into the C programming language;
-however, it is an easily derived concept. Accordingly, pretty much every project
-that does not use a standardized object oriented library (like GNOME's GObject)
-has their own slightly different way of doing object oriented programming; the
-Linux kernel is no exception.
+however, it is an easily derived concept. Accordingly, in most cases, every
+project that does not use a standardized object oriented library (like GNOME's
+GObject) has their own slightly different way of doing object oriented
+programming; the Linux kernel is no exception.
 
 The central concept in kernel object oriented programming is the class. In the
 kernel, a *class* is a struct that contains function pointers. This creates a
 contract between *implementers* and *users* since it forces them to use the
-same function signature without having to call the function directly. In order
-for it to truly be a class, the function pointers must specify that a pointer
-to the class, known as a *class handle*, be one of the parameters; this makes
-it possible for the member functions (also known as *methods*) to have access
-to member variables (more commonly known as *fields*) allowing the same
-implementation to have multiple *instances*.
-
-Typically a class can be *overridden* by *child classes* by embedding the
-*parent class* in the child class. Then when a method provided by the child
-class is called, the child implementation knows that the pointer passed to it is
-of a parent contained within the child; because of this, the child can compute
-the pointer to itself because the pointer to the parent is always a fixed offset
-from the pointer to the child; this offset is the offset of the parent contained
-in the child struct. For example:
+same function signature without having to call the function directly. To be a
+class, the function pointers must specify that a pointer to the class, known as
+a *class handle*, be one of the parameters. Thus the member functions (also
+known as *methods*) have access to member variables (also known as *fields*)
+allowing the same implementation to have multiple *instances*.
+
+A class can be *overridden* by *child classes* by embedding the *parent class*
+in the child class. Then when the child class *method* is called, the child
+implementation knows that the pointer passed to it is of a parent contained
+within the child. Thus, the child can compute the pointer to itself because the
+pointer to the parent is always a fixed offset from the pointer to the child.
+This offset is the offset of the parent contained in the child struct. For
+example:
 
 .. code-block:: c
 
@@ -278,7 +281,7 @@ in the child struct. For example:
 
 	int rectangle_area(struct shape *this)
 	{
-		struct rectangle *self = container_of(this, struct shape, parent);
+		struct rectangle *self = container_of(this, struct rectangle, parent);
 
 		return self->length * self->width;
 	};
@@ -290,8 +293,8 @@ in the child struct. For example:
 		self->width = width;
 	}
 
-In this example (as in most kernel code) the operation of computing the pointer
-to the child from the pointer to the parent is done by ``container_of``.
+In this example, computing the pointer to the child from the pointer to the
+parent is done by ``container_of``.
 
 Faking Classes
 ~~~~~~~~~~~~~~
@@ -300,14 +303,11 @@ In order to unit test a piece of code that calls a method in a class, the
 behavior of the method must be controllable, otherwise the test ceases to be a
 unit test and becomes an integration test.
 
-A fake just provides an implementation of a piece of code that is different than
-what runs in a production instance, but behaves identically from the standpoint
-of the callers; this is usually done to replace a dependency that is hard to
-deal with, or is slow.
-
-A good example for this might be implementing a fake EEPROM that just stores the
-"contents" in an internal buffer. For example, let's assume we have a class that
-represents an EEPROM:
+A fake class implements a piece of code that is different than what runs in a
+production instance, but behaves identical from the standpoint of the callers.
+This is done to replace a dependency that is hard to deal with, or is slow. For
+example, implementing a fake EEPROM that stores the "contents" in an
+internal buffer. Assume we have a class that represents an EEPROM:
 
 .. code-block:: c
 
@@ -316,7 +316,7 @@ represents an EEPROM:
 		ssize_t (*write)(struct eeprom *this, size_t offset, const char *buffer, size_t count);
 	};
 
-And we want to test some code that buffers writes to the EEPROM:
+And we want to test code that buffers writes to the EEPROM:
 
 .. code-block:: c
 
@@ -329,7 +329,7 @@ And we want to test some code that buffers writes to the EEPROM:
 	struct eeprom_buffer *new_eeprom_buffer(struct eeprom *eeprom);
 	void destroy_eeprom_buffer(struct eeprom *eeprom);
 
-We can easily test this code by *faking out* the underlying EEPROM:
+We can test this code by *faking out* the underlying EEPROM:
 
 .. code-block:: c
 
@@ -456,14 +456,14 @@ We can now use it to test ``struct eeprom_buffer``:
 		destroy_eeprom_buffer(ctx->eeprom_buffer);
 	}
 
-Testing against multiple inputs
+Testing Against Multiple Inputs
 -------------------------------
 
-Testing just a few inputs might not be enough to have confidence that the code
-works correctly, e.g. for a hash function.
+Testing just a few inputs is not enough to ensure that the code works correctly,
+for example: testing a hash function.
 
-In such cases, it can be helpful to have a helper macro or function, e.g. this
-fictitious example for ``sha1sum(1)``
+We can write a helper macro or function. The function is called for each input.
+For example, to test ``sha1sum(1)``, we can write:
 
 .. code-block:: c
 
@@ -475,16 +475,15 @@ fictitious example for ``sha1sum(1)``
 	TEST_SHA1("hello world",  "2aae6c35c94fcfb415dbe95f408b9ce91ee846ed");
 	TEST_SHA1("hello world!", "430ce34d020724ed75a196dfc2ad67c77772d169");
 
+Note the use of the ``_MSG`` version of ``KUNIT_EXPECT_STREQ`` to print a more
+detailed error and make the assertions clearer within the helper macros.
 
-Note the use of ``KUNIT_EXPECT_STREQ_MSG`` to give more context when it fails
-and make it easier to track down. (Yes, in this example, ``want`` is likely
-going to be unique enough on its own).
-
-The ``_MSG`` variants are even more useful when the same expectation is called
-multiple times (in a loop or helper function) and thus the line number isn't
-enough to identify what failed, like below.
+The ``_MSG`` variants are useful when the same expectation is called multiple
+times (in a loop or helper function) and thus the line number is not enough to
+identify what failed, as shown below.
 
-In some cases, it can be helpful to write a *table-driven test* instead, e.g.
+In complicated cases, we recommend using a *table-driven test* compared to the
+helper macro variation, for example:
 
 .. code-block:: c
 
@@ -513,17 +512,18 @@ In some cases, it can be helpful to write a *table-driven test* instead, e.g.
 	}
 
 
-There's more boilerplate involved, but it can:
+There is more boilerplate code involved, but it can:
+
+* be more readable when there are multiple inputs/outputs (due to field names).
 
-* be more readable when there are multiple inputs/outputs thanks to field names,
+  * For example, see ``fs/ext4/inode-test.c``.
 
-  * E.g. see ``fs/ext4/inode-test.c`` for an example of both.
-* reduce duplication if test cases can be shared across multiple tests.
+* reduce duplication if test cases are shared across multiple tests.
 
-  * E.g. if we wanted to also test ``sha256sum``, we could add a ``sha256``
+  * For example: if we want to test ``sha256sum``, we could add a ``sha256``
     field and reuse ``cases``.
 
-* be converted to a "parameterized test", see below.
+* be converted to a "parameterized test".
 
 Parameterized Testing
 ~~~~~~~~~~~~~~~~~~~~~
@@ -531,7 +531,7 @@ Parameterized Testing
 The table-driven testing pattern is common enough that KUnit has special
 support for it.
 
-Reusing the same ``cases`` array from above, we can write the test as a
+By reusing the same ``cases`` array from above, we can write the test as a
 "parameterized test" with the following.
 
 .. code-block:: c
@@ -541,7 +541,7 @@ Reusing the same ``cases`` array from above, we can write the test as a
 		const char *str;
 		const char *sha1;
 	};
-	struct sha1_test_case cases[] = {
+	const struct sha1_test_case cases[] = {
 		{
 			.str = "hello world",
 			.sha1 = "2aae6c35c94fcfb415dbe95f408b9ce91ee846ed",
@@ -580,195 +580,151 @@ Reusing the same ``cases`` array from above, we can write the test as a
 		{}
 	};
 
-.. _kunit-on-non-uml:
+Allocating Memory
+-----------------
 
-KUnit on non-UML architectures
-==============================
+Where you might use ``kzalloc``, you can instead use ``kunit_kzalloc`` as KUnit
+will then ensure that the memory is freed once the test completes.
 
-By default KUnit uses UML as a way to provide dependencies for code under test.
-Under most circumstances KUnit's usage of UML should be treated as an
-implementation detail of how KUnit works under the hood. Nevertheless, there
-are instances where being able to run architecture-specific code or test
-against real hardware is desirable. For these reasons KUnit supports running on
-other architectures.
-
-Running existing KUnit tests on non-UML architectures
------------------------------------------------------
-
-There are some special considerations when running existing KUnit tests on
-non-UML architectures:
-
-*   Hardware may not be deterministic, so a test that always passes or fails
-    when run under UML may not always do so on real hardware.
-*   Hardware and VM environments may not be hermetic. KUnit tries its best to
-    provide a hermetic environment to run tests; however, it cannot manage state
-    that it doesn't know about outside of the kernel. Consequently, tests that
-    may be hermetic on UML may not be hermetic on other architectures.
-*   Some features and tooling may not be supported outside of UML.
-*   Hardware and VMs are slower than UML.
-
-None of these are reasons not to run your KUnit tests on real hardware; they are
-only things to be aware of when doing so.
-
-Currently, the KUnit Wrapper (``tools/testing/kunit/kunit.py``) (aka
-kunit_tool) only fully supports running tests inside of UML and QEMU; however,
-this is only due to our own time limitations as humans working on KUnit. It is
-entirely possible to support other emulators and even actual hardware, but for
-now QEMU and UML is what is fully supported within the KUnit Wrapper. Again, to
-be clear, this is just the Wrapper. The actualy KUnit tests and the KUnit
-library they are written in is fully architecture agnostic and can be used in
-virtually any setup, you just won't have the benefit of typing a single command
-out of the box and having everything magically work perfectly.
-
-Again, all core KUnit framework features are fully supported on all
-architectures, and using them is straightforward: Most popular architectures
-are supported directly in the KUnit Wrapper via QEMU. Currently, supported
-architectures on QEMU include:
-
-*   i386
-*   x86_64
-*   arm
-*   arm64
-*   alpha
-*   powerpc
-*   riscv
-*   s390
-*   sparc
-
-In order to run KUnit tests on one of these architectures via QEMU with the
-KUnit wrapper, all you need to do is specify the flags ``--arch`` and
-``--cross_compile`` when invoking the KUnit Wrapper. For example, we could run
-the default KUnit tests on ARM in the following manner (assuming we have an ARM
-toolchain installed):
+This is useful because it lets us use the ``KUNIT_ASSERT_EQ`` macros to exit
+early from a test without having to worry about remembering to call ``kfree``.
+For example:
 
-.. code-block:: bash
+.. code-block:: c
 
-	tools/testing/kunit/kunit.py run --timeout=60 --jobs=12 --arch=arm --cross_compile=arm-linux-gnueabihf-
+	void example_test_allocation(struct kunit *test)
+	{
+		char *buffer = kunit_kzalloc(test, 16, GFP_KERNEL);
+		/* Ensure allocation succeeded. */
+		KUNIT_ASSERT_NOT_ERR_OR_NULL(test, buffer);
 
-Alternatively, if you want to run your tests on real hardware or in some other
-emulation environment, all you need to do is to take your kunitconfig, your
-Kconfig options for the tests you would like to run, and merge them into
-whatever config your are using for your platform. That's it!
+		KUNIT_ASSERT_STREQ(test, buffer, "");
+	}
 
-For example, let's say you have the following kunitconfig:
 
-.. code-block:: none
+Testing Static Functions
+------------------------
 
-	CONFIG_KUNIT=y
-	CONFIG_KUNIT_EXAMPLE_TEST=y
+If we do not want to expose functions or variables for testing, one option is to
+conditionally ``#include`` the test file at the end of your .c file. For
+example:
 
-If you wanted to run this test on an x86 VM, you might add the following config
-options to your ``.config``:
+.. code-block:: c
 
-.. code-block:: none
+	/* In my_file.c */
 
-	CONFIG_KUNIT=y
-	CONFIG_KUNIT_EXAMPLE_TEST=y
-	CONFIG_SERIAL_8250=y
-	CONFIG_SERIAL_8250_CONSOLE=y
+	static int do_interesting_thing();
 
-All these new options do is enable support for a common serial console needed
-for logging.
+	#ifdef CONFIG_MY_KUNIT_TEST
+	#include "my_kunit_test.c"
+	#endif
 
-Next, you could build a kernel with these tests as follows:
+Injecting Test-Only Code
+------------------------
 
+Similar to as shown above, we can add test-specific logic. For example:
 
-.. code-block:: bash
+.. code-block:: c
 
-	make ARCH=x86 olddefconfig
-	make ARCH=x86
+	/* In my_file.h */
 
-Once you have built a kernel, you could run it on QEMU as follows:
+	#ifdef CONFIG_MY_KUNIT_TEST
+	/* Defined in my_kunit_test.c */
+	void test_only_hook(void);
+	#else
+	void test_only_hook(void) { }
+	#endif
 
-.. code-block:: bash
+This test-only code can be made more useful by accessing the current ``kunit_test``
+as shown in next section: *Accessing The Current Test*.
 
-	qemu-system-x86_64 -enable-kvm \
-			   -m 1024 \
-			   -kernel arch/x86_64/boot/bzImage \
-			   -append 'console=ttyS0' \
-			   --nographic
+Accessing The Current Test
+--------------------------
 
-Interspersed in the kernel logs you might see the following:
+In some cases, we need to call test-only code from outside the test file.  This
+is helpful, for example, when providing a fake implementation of a function, or
+to fail any current test from within an error handler.
+We can do this via the ``kunit_test`` field in ``task_struct``, which we can
+access using the ``kunit_get_current_test()`` function in ``kunit/test-bug.h``.
 
-.. code-block:: none
+``kunit_get_current_test()`` is safe to call even if KUnit is not enabled. If
+KUnit is not enabled, or if no test is running in the current task, it will
+return ``NULL``. This compiles down to either a no-op or a static key check,
+so will have a negligible performance impact when no test is running.
 
-	TAP version 14
-		# Subtest: example
-		1..1
-		# example_simple_test: initializing
-		ok 1 - example_simple_test
-	ok 1 - example
+The example below uses this to implement a "mock" implementation of a function, ``foo``:
 
-Congratulations, you just ran a KUnit test on the x86 architecture!
+.. code-block:: c
 
-In a similar manner, kunit and kunit tests can also be built as modules,
-so if you wanted to run tests in this way you might add the following config
-options to your ``.config``:
+	#include <kunit/test-bug.h> /* for kunit_get_current_test */
 
-.. code-block:: none
+	struct test_data {
+		int foo_result;
+		int want_foo_called_with;
+	};
 
-	CONFIG_KUNIT=m
-	CONFIG_KUNIT_EXAMPLE_TEST=m
+	static int fake_foo(int arg)
+	{
+		struct kunit *test = kunit_get_current_test();
+		struct test_data *test_data = test->priv;
 
-Once the kernel is built and installed, a simple
+		KUNIT_EXPECT_EQ(test, test_data->want_foo_called_with, arg);
+		return test_data->foo_result;
+	}
 
-.. code-block:: bash
+	static void example_simple_test(struct kunit *test)
+	{
+		/* Assume priv (private, a member used to pass test data from
+		 * the init function) is allocated in the suite's .init */
+		struct test_data *test_data = test->priv;
 
-	modprobe example-test
+		test_data->foo_result = 42;
+		test_data->want_foo_called_with = 1;
 
-...will run the tests.
+		/* In a real test, we'd probably pass a pointer to fake_foo somewhere
+		 * like an ops struct, etc. instead of calling it directly. */
+		KUNIT_EXPECT_EQ(test, fake_foo(1), 42);
+	}
 
-.. note::
-   Note that you should make sure your test depends on ``KUNIT=y`` in Kconfig
-   if the test does not support module build.  Otherwise, it will trigger
-   compile errors if ``CONFIG_KUNIT`` is ``m``.
+In this example, we are using the ``priv`` member of ``struct kunit`` as a way
+of passing data to the test from the init function. In general ``priv`` is
+pointer that can be used for any user data. This is preferred over static
+variables, as it avoids concurrency issues.
 
-Writing new tests for other architectures
------------------------------------------
+Had we wanted something more flexible, we could have used a named ``kunit_resource``.
+Each test can have multiple resources which have string names providing the same
+flexibility as a ``priv`` member, but also, for example, allowing helper
+functions to create resources without conflicting with each other. It is also
+possible to define a clean up function for each resource, making it easy to
+avoid resource leaks. For more information, see Documentation/dev-tools/kunit/api/resource.rst.
 
-The first thing you must do is ask yourself whether it is necessary to write a
-KUnit test for a specific architecture, and then whether it is necessary to
-write that test for a particular piece of hardware. In general, writing a test
-that depends on having access to a particular piece of hardware or software (not
-included in the Linux source repo) should be avoided at all costs.
+Failing The Current Test
+------------------------
 
-Even if you only ever plan on running your KUnit test on your hardware
-configuration, other people may want to run your tests and may not have access
-to your hardware. If you write your test to run on UML, then anyone can run your
-tests without knowing anything about your particular setup, and you can still
-run your tests on your hardware setup just by compiling for your architecture.
+If we want to fail the current test, we can use ``kunit_fail_current_test(fmt, args...)``
+which is defined in ``<kunit/test-bug.h>`` and does not require pulling in ``<kunit/test.h>``.
+For example, we have an option to enable some extra debug checks on some data
+structures as shown below:
 
-.. important::
-   Always prefer tests that run on UML to tests that only run under a particular
-   architecture, and always prefer tests that run under QEMU or another easy
-   (and monetarily free) to obtain software environment to a specific piece of
-   hardware.
-
-Nevertheless, there are still valid reasons to write an architecture or hardware
-specific test: for example, you might want to test some code that really belongs
-in ``arch/some-arch/*``. Even so, try your best to write the test so that it
-does not depend on physical hardware: if some of your test cases don't need the
-hardware, only require the hardware for tests that actually need it.
-
-Now that you have narrowed down exactly what bits are hardware specific, the
-actual procedure for writing and running the tests is pretty much the same as
-writing normal KUnit tests. One special caveat is that you have to reset
-hardware state in between test cases; if this is not possible, you may only be
-able to run one test case per invocation.
+.. code-block:: c
 
-.. TODO(brendanhiggins@google.com): Add an actual example of an architecture-
-   dependent KUnit test.
+	#include <kunit/test-bug.h>
 
-KUnit debugfs representation
-============================
-When kunit test suites are initialized, they create an associated directory
-in ``/sys/kernel/debug/kunit/<test-suite>``.  The directory contains one file
+	#ifdef CONFIG_EXTRA_DEBUG_CHECKS
+	static void validate_my_data(struct data *data)
+	{
+		if (is_valid(data))
+			return;
 
-- results: "cat results" displays results of each test case and the results
-  of the entire suite for the last test run.
+		kunit_fail_current_test("data %p is invalid", data);
 
-The debugfs representation is primarily of use when kunit test suites are
-run in a native environment, either as modules or builtin.  Having a way
-to display results like this is valuable as otherwise results can be
-intermixed with other events in dmesg output.  The maximum size of each
-results file is KUNIT_LOG_SIZE bytes (defined in ``include/kunit/test.h``).
+		/* Normal, non-KUnit, error reporting code here. */
+	}
+	#else
+	static void my_debug_function(void) { }
+	#endif
+
+``kunit_fail_current_test()`` is safe to call even if KUnit is not enabled. If
+KUnit is not enabled, or if no test is running in the current task, it will do
+nothing. This compiles down to either a no-op or a static key check, so will
+have a negligible performance impact when no test is running.
diff --git a/Documentation/dev-tools/sparse.rst b/Documentation/dev-tools/sparse.rst
index 02102be7ff49..dc791c8d84d1 100644
--- a/Documentation/dev-tools/sparse.rst
+++ b/Documentation/dev-tools/sparse.rst
@@ -100,3 +100,5 @@ have already built it.
 
 The optional make variable CF can be used to pass arguments to sparse.  The
 build system passes -Wbitwise to sparse automatically.
+
+Note that sparse defines the __CHECKER__ preprocessor symbol.
diff --git a/Documentation/dev-tools/testing-overview.rst b/Documentation/dev-tools/testing-overview.rst
index 65feb81edb14..0aaf6ea53608 100644
--- a/Documentation/dev-tools/testing-overview.rst
+++ b/Documentation/dev-tools/testing-overview.rst
@@ -115,3 +115,66 @@ that none of these errors are occurring during the test.
 Some of these tools integrate with KUnit or kselftest and will
 automatically fail tests if an issue is detected.
 
+Static Analysis Tools
+=====================
+
+In addition to testing a running kernel, one can also analyze kernel source code
+directly (**at compile time**) using **static analysis** tools. The tools
+commonly used in the kernel allow one to inspect the whole source tree or just
+specific files within it. They make it easier to detect and fix problems during
+the development process.
+
+Sparse can help test the kernel by performing type-checking, lock checking,
+value range checking, in addition to reporting various errors and warnings while
+examining the code. See the Documentation/dev-tools/sparse.rst documentation
+page for details on how to use it.
+
+Smatch extends Sparse and provides additional checks for programming logic
+mistakes such as missing breaks in switch statements, unused return values on
+error checking, forgetting to set an error code in the return of an error path,
+etc. Smatch also has tests against more serious issues such as integer
+overflows, null pointer dereferences, and memory leaks. See the project page at
+http://smatch.sourceforge.net/.
+
+Coccinelle is another static analyzer at our disposal. Coccinelle is often used
+to aid refactoring and collateral evolution of source code, but it can also help
+to avoid certain bugs that occur in common code patterns. The types of tests
+available include API tests, tests for correct usage of kernel iterators, checks
+for the soundness of free operations, analysis of locking behavior, and further
+tests known to help keep consistent kernel usage. See the
+Documentation/dev-tools/coccinelle.rst documentation page for details.
+
+Beware, though, that static analysis tools suffer from **false positives**.
+Errors and warns need to be evaluated carefully before attempting to fix them.
+
+When to use Sparse and Smatch
+-----------------------------
+
+Sparse does type checking, such as verifying that annotated variables do not
+cause endianness bugs, detecting places that use ``__user`` pointers improperly,
+and analyzing the compatibility of symbol initializers.
+
+Smatch does flow analysis and, if allowed to build the function database, it
+also does cross function analysis. Smatch tries to answer questions like where
+is this buffer allocated? How big is it? Can this index be controlled by the
+user? Is this variable larger than that variable?
+
+It's generally easier to write checks in Smatch than it is to write checks in
+Sparse. Nevertheless, there are some overlaps between Sparse and Smatch checks.
+
+Strong points of Smatch and Coccinelle
+--------------------------------------
+
+Coccinelle is probably the easiest for writing checks. It works before the
+pre-processor so it's easier to check for bugs in macros using Coccinelle.
+Coccinelle also creates patches for you, which no other tool does.
+
+For example, with Coccinelle you can do a mass conversion from
+``kmalloc(x * size, GFP_KERNEL)`` to ``kmalloc_array(x, size, GFP_KERNEL)``, and
+that's really useful. If you just created a Smatch warning and try to push the
+work of converting on to the maintainers they would be annoyed. You'd have to
+argue about each warning if can really overflow or not.
+
+Coccinelle does no analysis of variable values, which is the strong point of
+Smatch. On the other hand, Coccinelle allows you to do simple things in a simple
+way.
diff --git a/Documentation/devicetree/bindings/.gitignore b/Documentation/devicetree/bindings/.gitignore
index a77719968a7e..51ddb26d93f0 100644
--- a/Documentation/devicetree/bindings/.gitignore
+++ b/Documentation/devicetree/bindings/.gitignore
@@ -2,3 +2,8 @@
 *.example.dts
 /processed-schema*.yaml
 /processed-schema*.json
+
+#
+# We don't want to ignore the following even if they are dot-files
+#
+!.yamllint
diff --git a/Documentation/devicetree/bindings/.yamllint b/Documentation/devicetree/bindings/.yamllint
index 214abd3ec440..4abe9f0a1d46 100644
--- a/Documentation/devicetree/bindings/.yamllint
+++ b/Documentation/devicetree/bindings/.yamllint
@@ -19,7 +19,7 @@ rules:
   colons: {max-spaces-before: 0, max-spaces-after: 1}
   commas: {min-spaces-after: 1, max-spaces-after: 1}
   comments:
-    require-starting-space: false
+    require-starting-space: true
     min-spaces-from-content: 1
   comments-indentation: disable
   document-start:
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index a072e95de626..8b395893bd85 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -3,12 +3,18 @@ DT_DOC_CHECKER ?= dt-doc-validate
 DT_EXTRACT_EX ?= dt-extract-example
 DT_MK_SCHEMA ?= dt-mk-schema
 
-DT_SCHEMA_LINT = $(shell which yamllint)
+DT_SCHEMA_LINT = $(shell which yamllint || \
+  echo "warning: python package 'yamllint' not installed, skipping" >&2)
 
-DT_SCHEMA_MIN_VERSION = 2021.2.1
+DT_SCHEMA_MIN_VERSION = 2022.3
 
 PHONY += check_dtschema_version
 check_dtschema_version:
+	@which $(DT_DOC_CHECKER) >/dev/null || \
+		{ echo "Error: '$(DT_DOC_CHECKER)' not found!" >&2; \
+		  echo "Ensure dtschema python package is installed and in your PATH." >&2; \
+		  echo "Current PATH is:" >&2; \
+		  echo "$$PATH" >&2; false; }
 	@{ echo $(DT_SCHEMA_MIN_VERSION); \
 	$(DT_DOC_CHECKER) --version 2>/dev/null || echo 0; } | sort -Vc >/dev/null || \
 	{ echo "ERROR: dtschema minimum version is v$(DT_SCHEMA_MIN_VERSION)" >&2; false; }
@@ -19,16 +25,16 @@ quiet_cmd_extract_ex = DTEX    $@
 $(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE
 	$(call if_changed,extract_ex)
 
-# Use full schemas when checking %.example.dts
-DT_TMP_SCHEMA := $(obj)/processed-schema-examples.json
+find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
+		-name 'processed-schema*' \)
 
-find_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
-		-name 'processed-schema*' ! \
-		-name '*.example.dt.yaml' \)
+find_cmd = $(find_all_cmd) | grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))"
+CHK_DT_DOCS := $(shell $(find_cmd))
 
 quiet_cmd_yamllint = LINT    $(src)
       cmd_yamllint = ($(find_cmd) | \
-                     xargs $(DT_SCHEMA_LINT) -f parsable -c $(srctree)/$(src)/.yamllint >&2) || true
+                     xargs -n200 -P$$(nproc) \
+		     $(DT_SCHEMA_LINT) -f parsable -c $(srctree)/$(src)/.yamllint >&2) || true
 
 quiet_cmd_chk_bindings = CHKDT   $@
       cmd_chk_bindings = ($(find_cmd) | \
@@ -36,9 +42,7 @@ quiet_cmd_chk_bindings = CHKDT   $@
 
 quiet_cmd_mk_schema = SCHEMA  $@
       cmd_mk_schema = f=$$(mktemp) ; \
-                      $(if $(DT_MK_SCHEMA_FLAGS), \
-                           printf '%s\n' $(real-prereqs), \
-                           $(find_cmd)) > $$f ; \
+                      $(find_all_cmd) > $$f ; \
                       $(DT_MK_SCHEMA) -j $(DT_MK_SCHEMA_FLAGS) @$$f > $@ ; \
 		      rm -f $$f
 
@@ -48,45 +52,29 @@ define rule_chkdt
 	$(call cmd,mk_schema)
 endef
 
-DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_cmd)))
+DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_all_cmd)))
 
 override DTC_FLAGS := \
 	-Wno-avoid_unnecessary_addr_size \
 	-Wno-graph_child_address \
-	-Wno-interrupt_provider
+	-Wno-interrupt_provider \
+	-Wno-unique_unit_address \
+	-Wunique_unit_address_if_enabled
 
 # Disable undocumented compatible checks until warning free
 override DT_CHECKER_FLAGS ?=
 
-$(obj)/processed-schema-examples.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE
+$(obj)/processed-schema.json: $(DT_DOCS) $(src)/.yamllint check_dtschema_version FORCE
 	$(call if_changed_rule,chkdt)
 
-ifeq ($(DT_SCHEMA_FILES),)
-
-# Unless DT_SCHEMA_FILES is specified, use the full schema for dtbs_check too.
-# Just copy processed-schema-examples.json
-
-$(obj)/processed-schema.json: $(obj)/processed-schema-examples.json FORCE
-	$(call if_changed,copy)
-
-DT_SCHEMA_FILES = $(DT_DOCS)
-
-else
-
-# If DT_SCHEMA_FILES is specified, use it for processed-schema.json
-
-$(obj)/processed-schema.json: DT_MK_SCHEMA_FLAGS := -u
-$(obj)/processed-schema.json: $(DT_SCHEMA_FILES) check_dtschema_version FORCE
-	$(call if_changed,mk_schema)
-
-endif
-
-always-$(CHECK_DT_BINDING) += processed-schema-examples.json
-always-$(CHECK_DTBS)       += processed-schema.json
-always-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
-always-$(CHECK_DT_BINDING) += $(patsubst $(src)/%.yaml,%.example.dt.yaml, $(DT_SCHEMA_FILES))
+always-y += processed-schema.json
+always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dts, $(CHK_DT_DOCS))
+always-$(CHECK_DT_BINDING) += $(patsubst $(srctree)/$(src)/%.yaml,%.example.dtb, $(CHK_DT_DOCS))
 
 # Hack: avoid 'Argument list too long' error for 'make clean'. Remove most of
 # build artifacts here before they are processed by scripts/Makefile.clean
 clean-files = $(shell find $(obj) \( -name '*.example.dts' -o \
-			-name '*.example.dt.yaml' \) -delete 2>/dev/null)
+			-name '*.example.dtb' \) -delete 2>/dev/null)
+
+dt_compatible_check: $(obj)/processed-schema.json
+	$(Q)$(srctree)/scripts/dtc/dt-extract-compatibles $(srctree) | xargs dt-check-compatible -v -s $<
diff --git a/Documentation/devicetree/bindings/arm/actions.yaml b/Documentation/devicetree/bindings/arm/actions.yaml
index 02dc72c97645..e012f612f039 100644
--- a/Documentation/devicetree/bindings/arm/actions.yaml
+++ b/Documentation/devicetree/bindings/arm/actions.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/actions.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Actions Semi platforms device tree bindings
+title: Actions Semi platforms
 
 maintainers:
   - Andreas Färber <afaerber@suse.de>
diff --git a/Documentation/devicetree/bindings/arm/airoha.yaml b/Documentation/devicetree/bindings/arm/airoha.yaml
new file mode 100644
index 000000000000..3292c669ee11
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/airoha.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/airoha.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha SoC based Platforms
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <john@phrozen.org>
+
+description:
+  Boards with an Airoha SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - airoha,en7523-evb
+          - const: airoha,en7523
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml
index c15c92fdf2ed..8c7575455422 100644
--- a/Documentation/devicetree/bindings/arm/altera.yaml
+++ b/Documentation/devicetree/bindings/arm/altera.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/altera.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Altera's SoCFPGA platform device tree bindings
+title: Altera's SoCFPGA platform
 
 maintainers:
   - Dinh Nguyen <dinguyen@kernel.org>
@@ -13,12 +13,55 @@ properties:
   $nodename:
     const: "/"
   compatible:
-    items:
-      - enum:
-          - altr,socfpga-cyclone5
-          - altr,socfpga-arria5
-          - altr,socfpga-arria10
-      - const: altr,socfpga
+    oneOf:
+      - description: Arria 5 boards
+        items:
+          - enum:
+              - altr,socfpga-arria5-socdk
+          - const: altr,socfpga-arria5
+          - const: altr,socfpga
+
+      - description: Arria 10 boards
+        items:
+          - enum:
+              - altr,socfpga-arria10-socdk
+          - const: altr,socfpga-arria10
+          - const: altr,socfpga
+
+      - description: Mercury+ AA1 boards
+        items:
+          - enum:
+              - enclustra,mercury-pe1
+              - google,chameleon-v3
+          - const: enclustra,mercury-aa1
+          - const: altr,socfpga-arria10
+          - const: altr,socfpga
+
+      - description: Cyclone 5 boards
+        items:
+          - enum:
+              - altr,socfpga-cyclone5-socdk
+              - denx,mcvevk
+              - ebv,socrates
+              - macnica,sodia
+              - novtech,chameleon96
+              - samtec,vining
+              - terasic,de0-atlas
+              - terasic,socfpga-cyclone5-sockit
+          - const: altr,socfpga-cyclone5
+          - const: altr,socfpga
+
+      - description: Stratix 10 boards
+        items:
+          - enum:
+              - altr,socfpga-stratix10-socdk
+              - altr,socfpga-stratix10-swvp
+          - const: altr,socfpga-stratix10
+
+      - description: SoCFPGA VT
+        items:
+          - const: altr,socfpga-vt
+          - const: altr,socfpga
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/arm/amazon,al.yaml b/Documentation/devicetree/bindings/arm/amazon,al.yaml
index 0f03135d91b6..37dbb4768e5b 100644
--- a/Documentation/devicetree/bindings/arm/amazon,al.yaml
+++ b/Documentation/devicetree/bindings/arm/amazon,al.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/amazon,al.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Amazon's Annapurna Labs Alpine Platform Device Tree Bindings
+title: Amazon's Annapurna Labs Alpine Platform
 
 maintainers:
   - Hanna Hawa <hhhawa@amazon.com>
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 6423377710ee..274ee0890312 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/amlogic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Amlogic MesonX device tree bindings
+title: Amlogic MesonX
 
 maintainers:
   - Kevin Hilman <khilman@baylibre.com>
@@ -86,6 +86,7 @@ properties:
           - enum:
               - amlogic,p281
               - oranth,tx3-mini
+              - jethome,jethub-j80
           - const: amlogic,s905w
           - const: amlogic,meson-gxl
 
@@ -107,6 +108,7 @@ properties:
               - amlogic,p230
               - amlogic,p231
               - libretech,aml-s905d-pc
+              - osmc,vero4k-plus
               - phicomm,n1
               - smartlabs,sml5442tw
               - videostrong,gxl-kii-pro
@@ -118,6 +120,7 @@ properties:
           - enum:
               - amlogic,q200
               - amlogic,q201
+              - azw,gt1-ultimate
               - khadas,vim2
               - kingnovel,r-box-pro
               - libretech,aml-s912-pc
@@ -133,6 +136,8 @@ properties:
         items:
           - enum:
               - amlogic,s400
+              - jethome,jethub-j100
+              - jethome,jethub-j110
           - const: amlogic,a113d
           - const: amlogic,meson-axg
 
@@ -141,13 +146,24 @@ properties:
           - enum:
               - amediatech,x96-max
               - amlogic,u200
+              - radxa,zero
               - seirobotics,sei510
           - const: amlogic,g12a
 
       - description: Boards with the Amlogic Meson G12B A311D SoC
         items:
           - enum:
+              - bananapi,bpi-m2s
               - khadas,vim3
+              - radxa,zero2
+          - const: amlogic,a311d
+          - const: amlogic,g12b
+
+      - description: Boards using the BPI-CM4 module with Amlogic Meson G12B A311D SoC
+        items:
+          - enum:
+              - bananapi,bpi-cm4io
+          - const: bananapi,bpi-cm4
           - const: amlogic,a311d
           - const: amlogic,g12b
 
@@ -157,7 +173,10 @@ properties:
               - azw,gsking-x
               - azw,gtking
               - azw,gtking-pro
+              - bananapi,bpi-m2s
+              - hardkernel,odroid-go-ultra
               - hardkernel,odroid-n2
+              - hardkernel,odroid-n2l
               - hardkernel,odroid-n2-plus
               - khadas,vim3
               - ugoos,am6
@@ -167,9 +186,15 @@ properties:
       - description: Boards with the Amlogic Meson SM1 S905X3/D3/Y3 SoC
         items:
           - enum:
+              - amediatech,x96-air
+              - amediatech,x96-air-gbit
+              - bananapi,bpi-m2-pro
               - bananapi,bpi-m5
+              - cyx,a95xf3-air
+              - cyx,a95xf3-air-gbit
               - hardkernel,odroid-c4
               - hardkernel,odroid-hc4
+              - haochuangyi,h96-max
               - khadas,vim3l
               - seirobotics,sei610
           - const: amlogic,sm1
@@ -180,6 +205,12 @@ properties:
               - amlogic,ad401
           - const: amlogic,a1
 
+      - description: Boards with the Amlogic Meson S4 S805X2 SoC
+        items:
+          - enum:
+              - amlogic,aq222
+          - const: amlogic,s4
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
index 6cc74523ebfd..7dff32f373cb 100644
--- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
@@ -2,13 +2,13 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/amlogic/amlogic,meson-gx-ao-secure.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/amlogic/amlogic,meson-gx-ao-secure.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson Firmware registers Interface
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Meson SoCs have a register bank with status and data shared with the
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml
index eee7cda9f91b..09b27e98d4c9 100644
--- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-mx-secbus2.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/amlogic/amlogic,meson-mx-secbus2.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/amlogic/amlogic,meson-mx-secbus2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson8/Meson8b/Meson8m2 SECBUS2 register interface
 
diff --git a/Documentation/devicetree/bindings/arm/apple.yaml b/Documentation/devicetree/bindings/arm/apple.yaml
index 1e772c85206c..883fd67e3752 100644
--- a/Documentation/devicetree/bindings/arm/apple.yaml
+++ b/Documentation/devicetree/bindings/arm/apple.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/apple.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Apple ARM Machine Device Tree Bindings
+title: Apple ARM Machine
 
 maintainers:
   - Hector Martin <marcan@marcan.st>
@@ -12,12 +12,27 @@ maintainers:
 description: |
   ARM platforms using SoCs designed by Apple Inc., branded "Apple Silicon".
 
-  This currently includes devices based on the "M1" SoC, starting with the
-  three Mac models released in late 2020:
+  This currently includes devices based on the "M1" SoC:
 
   - Mac mini (M1, 2020)
   - MacBook Pro (13-inch, M1, 2020)
   - MacBook Air (M1, 2020)
+  - iMac (24-inch, M1, 2021)
+
+  Devices based on the "M2" SoC:
+
+  - MacBook Air (M2, 2022)
+  - MacBook Pro (13-inch, M2, 2022)
+  - Mac mini (M2, 2023)
+
+  And devices based on the "M1 Pro", "M1 Max" and "M1 Ultra" SoCs:
+
+  - MacBook Pro (14-inch, M1 Pro, 2021)
+  - MacBook Pro (14-inch, M1 Max, 2021)
+  - MacBook Pro (16-inch, M1 Pro, 2021)
+  - MacBook Pro (16-inch, M1 Max, 2021)
+  - Mac Studio (M1 Max, 2022)
+  - Mac Studio (M1 Ultra, 2022)
 
   The compatible property should follow this format:
 
@@ -56,9 +71,44 @@ properties:
               - apple,j274 # Mac mini (M1, 2020)
               - apple,j293 # MacBook Pro (13-inch, M1, 2020)
               - apple,j313 # MacBook Air (M1, 2020)
+              - apple,j456 # iMac (24-inch, 4x USB-C, M1, 2021)
+              - apple,j457 # iMac (24-inch, 2x USB-C, M1, 2021)
           - const: apple,t8103
           - const: apple,arm-platform
 
+      - description: Apple M2 SoC based platforms
+        items:
+          - enum:
+              - apple,j413 # MacBook Air (M2, 2022)
+              - apple,j473 # Mac mini (M2, 2023)
+              - apple,j493 # MacBook Pro (13-inch, M2, 2022)
+          - const: apple,t8112
+          - const: apple,arm-platform
+
+      - description: Apple M1 Pro SoC based platforms
+        items:
+          - enum:
+              - apple,j314s # MacBook Pro (14-inch, M1 Pro, 2021)
+              - apple,j316s # MacBook Pro (16-inch, M1 Pro, 2021)
+          - const: apple,t6000
+          - const: apple,arm-platform
+
+      - description: Apple M1 Max SoC based platforms
+        items:
+          - enum:
+              - apple,j314c # MacBook Pro (14-inch, M1 Max, 2021)
+              - apple,j316c # MacBook Pro (16-inch, M1 Max, 2021)
+              - apple,j375c # Mac Studio (M1 Max, 2022)
+          - const: apple,t6001
+          - const: apple,arm-platform
+
+      - description: Apple M1 Ultra SoC based platforms
+        items:
+          - enum:
+              - apple,j375d # Mac Studio (M1 Ultra, 2022)
+          - const: apple,t6002
+          - const: apple,arm-platform
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
new file mode 100644
index 000000000000..673277a7a224
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/apple/apple,pmgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC Power Manager (PMGR)
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  Apple SoCs include PMGR blocks responsible for power management,
+  which can control various clocks, resets, power states, and
+  performance features. This node represents the PMGR as a syscon,
+  with sub-nodes representing individual features.
+
+properties:
+  $nodename:
+    pattern: "^power-management@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-pmgr
+          - apple,t8112-pmgr
+          - apple,t6000-pmgr
+      - const: apple,pmgr
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "power-controller@[0-9a-f]+$":
+    description:
+      The individual power management domains within this controller
+    type: object
+    $ref: /schemas/power/apple,pmgr-pwrstate.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        power-management@23b700000 {
+            compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x2 0x3b700000 0x0 0x14000>;
+
+            ps_sio: power-controller@1c0 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x1c0 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "sio";
+                apple,always-on;
+            };
+
+            ps_uart_p: power-controller@220 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x220 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "uart_p";
+                power-domains = <&ps_sio>;
+            };
+
+            ps_uart0: power-controller@270 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x270 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "uart0";
+                power-domains = <&ps_uart_p>;
+            };
+        };
+
+        power-management@23d280000 {
+            compatible = "apple,t8103-pmgr", "apple,pmgr", "syscon", "simple-mfd";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x2 0x3d280000 0x0 0xc000>;
+
+            ps_aop_filter: power-controller@4000 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4000 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_filter";
+            };
+
+            ps_aop_base: power-controller@4010 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4010 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_base";
+                power-domains = <&ps_aop_filter>;
+            };
+
+            ps_aop_shim: power-controller@4038 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4038 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_shim";
+                power-domains = <&ps_aop_base>;
+            };
+
+            ps_aop_uart0: power-controller@4048 {
+                compatible = "apple,t8103-pmgr-pwrstate", "apple,pmgr-pwrstate";
+                reg = <0x4048 8>;
+                #power-domain-cells = <0>;
+                #reset-cells = <0>;
+                label = "aop_uart0";
+                power-domains = <&ps_aop_shim>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/arm,cci-400.yaml b/Documentation/devicetree/bindings/arm/arm,cci-400.yaml
new file mode 100644
index 000000000000..d28303d909e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,cci-400.yaml
@@ -0,0 +1,211 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,cci-400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM CCI Cache Coherent Interconnect
+
+maintainers:
+  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+
+description: >
+  ARM multi-cluster systems maintain intra-cluster coherency through a cache
+  coherent interconnect (CCI) that is capable of monitoring bus transactions
+  and manage coherency, TLB invalidations and memory barriers.
+
+  It allows snooping and distributed virtual memory message broadcast across
+  clusters, through memory mapped interface, with a global control register
+  space and multiple sets of interface control registers, one per slave
+  interface.
+
+properties:
+  $nodename:
+    pattern: "^cci(@[0-9a-f]+)?$"
+
+  compatible:
+    enum:
+      - arm,cci-400
+      - arm,cci-500
+      - arm,cci-550
+
+  reg:
+    maxItems: 1
+    description: >
+      Specifies base physical address of CCI control registers common to all
+      interfaces.
+
+  "#address-cells": true
+  "#size-cells": true
+  ranges: true
+
+patternProperties:
+  "^slave-if@[0-9a-f]+$":
+    type: object
+
+    properties:
+      compatible:
+        const: arm,cci-400-ctrl-if
+
+      interface-type:
+        enum:
+          - ace
+          - ace-lite
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - interface-type
+      - reg
+
+    additionalProperties: false
+
+  "^pmu@[0-9a-f]+$":
+    type: object
+
+    properties:
+      compatible:
+        oneOf:
+          - const: arm,cci-400-pmu,r0
+          - const: arm,cci-400-pmu,r1
+          - const: arm,cci-400-pmu
+            deprecated: true
+            description: >
+              Permitted only where OS has secure access to CCI registers
+          - const: arm,cci-500-pmu,r0
+          - const: arm,cci-550-pmu,r0
+
+      interrupts:
+        minItems: 1
+        maxItems: 8
+        description: >
+          List of counter overflow interrupts, one per counter. The interrupts
+          must be specified starting with the cycle counter overflow interrupt,
+          followed by counter0 overflow interrupt, counter1 overflow
+          interrupt,...  ,counterN overflow interrupt.
+
+          The CCI PMU has an interrupt signal for each counter. The number of
+          interrupts must be equal to the number of counters.
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - interrupts
+      - reg
+
+    additionalProperties: false
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - ranges
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+      / {
+          #address-cells = <2>;
+          #size-cells = <2>;
+
+          compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
+          model = "V2P-CA15_CA7";
+          arm,hbi = <0x249>;
+          interrupt-parent = <&gic>;
+
+          gic: interrupt-controller {
+              interrupt-controller;
+              #interrupt-cells = <3>;
+          };
+
+          /*
+           * This CCI node corresponds to a CCI component whose control
+           * registers sits at address 0x000000002c090000.
+           *
+           * CCI slave interface @0x000000002c091000 is connected to dma
+           * controller dma0.
+           *
+           * CCI slave interface @0x000000002c094000 is connected to CPUs
+           * {CPU0, CPU1};
+           *
+           * CCI slave interface @0x000000002c095000 is connected to CPUs
+           * {CPU2, CPU3};
+           */
+
+          cpus {
+              #size-cells = <0>;
+              #address-cells = <1>;
+
+              CPU0: cpu@0 {
+                  device_type = "cpu";
+                  compatible = "arm,cortex-a15";
+                  cci-control-port = <&cci_control1>;
+                  reg = <0x0>;
+              };
+
+              CPU1: cpu@1 {
+                  device_type = "cpu";
+                  compatible = "arm,cortex-a15";
+                  cci-control-port = <&cci_control1>;
+                  reg = <0x1>;
+              };
+
+              CPU2: cpu@100 {
+                  device_type = "cpu";
+                  compatible = "arm,cortex-a7";
+                  cci-control-port = <&cci_control2>;
+                  reg = <0x100>;
+              };
+
+              CPU3: cpu@101 {
+                  device_type = "cpu";
+                  compatible = "arm,cortex-a7";
+                  cci-control-port = <&cci_control2>;
+                  reg = <0x101>;
+              };
+          };
+
+          cci@2c090000 {
+              compatible = "arm,cci-400";
+              #address-cells = <1>;
+              #size-cells = <1>;
+              reg = <0x0 0x2c090000 0 0x1000>;
+              ranges = <0x0 0x0 0x2c090000 0x10000>;
+
+              cci_control0: slave-if@1000 {
+                  compatible = "arm,cci-400-ctrl-if";
+                  interface-type = "ace-lite";
+                  reg = <0x1000 0x1000>;
+              };
+
+              cci_control1: slave-if@4000 {
+                  compatible = "arm,cci-400-ctrl-if";
+                  interface-type = "ace";
+                  reg = <0x4000 0x1000>;
+              };
+
+              cci_control2: slave-if@5000 {
+                  compatible = "arm,cci-400-ctrl-if";
+                  interface-type = "ace";
+                  reg = <0x5000 0x1000>;
+              };
+
+              pmu@9000 {
+                  compatible = "arm,cci-400-pmu";
+                  reg = <0x9000 0x5000>;
+                  interrupts = <0 101 4>,
+                    <0 102 4>,
+                    <0 103 4>,
+                    <0 104 4>,
+                    <0 105 4>;
+              };
+          };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
new file mode 100644
index 000000000000..2bae06eed693
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-catu.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-catu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Coresight Address Translation Unit (CATU)
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The CoreSight Address Translation Unit (CATU) translates addresses between an
+  AXI master and system memory. The CATU is normally used along with the TMC to
+  implement scattering of virtual trace buffers in physical memory. The CATU
+  translates contiguous Virtual Addresses (VAs) from an AXI master into
+  non-contiguous Physical Addresses (PAs) that are intended for system memory.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-catu
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-catu
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  interrupts:
+    maxItems: 1
+    description: Address translation error interrupt
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: AXI Slave connected to another Coresight component
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    catu@207e0000 {
+        compatible = "arm,coresight-catu", "arm,primecell";
+        reg = <0x207e0000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+
+        interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+        in-ports {
+            port {
+                catu_in_port: endpoint {
+                    remote-endpoint = <&etr_out_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml
new file mode 100644
index 000000000000..0a6bc03ebe00
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cpu-debug.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-cpu-debug.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CoreSight CPU Debug Component
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight CPU debug component are compliant with the ARMv8 architecture
+  reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
+  external debug module is mainly used for two modes: self-hosted debug and
+  external debug, and it can be accessed from mmio region from Coresight and
+  eventually the debug module connects with CPU for debugging. And the debug
+  module provides sample-based profiling extension, which can be used to sample
+  CPU program counter, secure state and exception level, etc; usually every CPU
+  has one dedicated debug module to be connected.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-cpu-debug
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-cpu-debug
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  cpu:
+    description:
+      A phandle to the cpu this debug component is bound to.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    maxItems: 1
+    description:
+      A phandle to the debug power domain if the debug logic has its own
+      dedicated power domain. CPU idle states may also need to be separately
+      constrained to keep CPU cores powered.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - cpu
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    debug@f6590000 {
+        compatible = "arm,coresight-cpu-debug", "arm,primecell";
+        reg = <0xf6590000 0x1000>;
+        clocks = <&sys_ctrl 1>;
+        clock-names = "apb_pclk";
+        cpu = <&cpu0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
new file mode 100644
index 000000000000..0c5b875cb654
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
@@ -0,0 +1,334 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-cti.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Coresight Cross Trigger Interface (CTI) device.
+
+description: |
+  The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected
+  to one or more CoreSight components and/or a CPU, with CTIs interconnected in
+  a star topology via the Cross Trigger Matrix (CTM), which is not programmable.
+  The ECT components are not part of the trace generation data path and are thus
+  not part of the CoreSight graph.
+
+  The CTI component properties define the connections between the individual
+  CTI and the components it is directly connected to, consisting of input and
+  output hardware trigger signals. CTIs can have a maximum number of input and
+  output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The
+  number is defined at design time, the maximum of each defined in the DEVID
+  register.
+
+  CTIs are interconnected in a star topology via the CTM, using a number of
+  programmable channels, usually 4, but again implementation defined and
+  described in the DEVID register. The star topology is not required to be
+  described in the bindings as the actual connections are software
+  programmable.
+
+  In general the connections between CTI and components via the trigger signals
+  are implementation defined, except when the CTI is connected to an ARM v8
+  architecture core and optional ETM.
+
+  In this case the ARM v8 architecture defines the required signal connections
+  between CTI and the CPU core and ETM if present. In the case of a v8
+  architecturally connected CTI an additional compatible string is used to
+  indicate this feature (arm,coresight-cti-v8-arch).
+
+  When CTI trigger connection information is unavailable then a minimal driver
+  binding can be declared with no explicit trigger signals. This will result
+  the driver detecting the maximum available triggers and channels from the
+  DEVID register and make them all available for use as a single default
+  connection. Any user / client application will require additional information
+  on the connections between the CTI and other components for correct operation.
+  This information might be found by enabling the Integration Test registers in
+  the driver (set CONFIG_CORESIGHT_CTI_INTEGRATION_TEST in Kernel
+  configuration). These registers may be used to explore the trigger connections
+  between CTI and other CoreSight components.
+
+  Certain triggers between CoreSight devices and the CTI have specific types
+  and usages. These can be defined along with the signal indexes with the
+  constants defined in <dt-bindings/arm/coresight-cti-dt.h>
+
+  For example a CTI connected to a core will usually have a DBGREQ signal. This
+  is defined in the binding as type PE_EDBGREQ. These types will appear in an
+  optional array alongside the signal indexes. Omitting types will default all
+  signals to GEN_IO.
+
+  Note that some hardware trigger signals can be connected to non-CoreSight
+  components (e.g. UART etc) depending on hardware implementation.
+
+maintainers:
+  - Mike Leach <mike.leach@linaro.org>
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,coresight-cti
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^cti(@[0-9a-f]+)$"
+  compatible:
+    oneOf:
+      - items:
+          - const: arm,coresight-cti
+          - const: arm,primecell
+      - items:
+          - const: arm,coresight-cti-v8-arch
+          - const: arm,coresight-cti
+          - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  cpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Handle to cpu this device is associated with. This must appear in the
+      base cti node if compatible string arm,coresight-cti-v8-arch is used,
+      or may appear in a trig-conns child node when appropriate.
+
+  power-domains:
+    maxItems: 1
+
+  arm,cti-ctm-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the CTM this CTI is connected to, in large systems with multiple
+      separate CTI/CTM nets. Typically multi-socket systems where the CTM is
+      propagated between sockets.
+
+  arm,cs-dev-assoc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      defines a phandle reference to an associated CoreSight trace device.
+      When the associated trace device is enabled, then the respective CTI
+      will be enabled. Use in a trig-conns node, or in CTI base node when
+      compatible string arm,coresight-cti-v8-arch used. If the associated
+      device has not been registered then the node name will be stored as
+      the connection name for later resolution. If the associated device is
+      not a CoreSight device or not registered then the node name will remain
+      the connection name and automatic enabling will not occur.
+
+  # size cells and address cells required if trig-conns node present.
+  "#size-cells":
+    const: 0
+
+  "#address-cells":
+    const: 1
+
+patternProperties:
+  '^trig-conns@([0-9]+)$':
+    type: object
+    description:
+      A trigger connections child node which describes the trigger signals
+      between this CTI and another hardware device. This device may be a CPU,
+      CoreSight device, any other hardware device or simple external IO lines.
+      The connection may have both input and output triggers, or only one or the
+      other.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      arm,trig-in-sigs:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of CTI trigger in signal numbers in use by a trig-conns node.
+
+      arm,trig-in-types:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of constants representing the types for the CTI trigger in
+          signals. Types in this array match to the corresponding signal in the
+          arm,trig-in-sigs array. If the -types array is smaller, or omitted
+          completely, then the types will default to GEN_IO.
+
+      arm,trig-out-sigs:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of CTI trigger out signal numbers in use by a trig-conns node.
+
+      arm,trig-out-types:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of constants representing the types for the CTI trigger out
+          signals. Types in this array match to the corresponding signal
+          in the arm,trig-out-sigs array. If the "-types" array is smaller,
+          or omitted completely, then the types will default to GEN_IO.
+
+      arm,trig-filters:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 32
+        description:
+          List of CTI trigger out signals that will be blocked from becoming
+          active, unless filtering is disabled on the driver.
+
+      arm,trig-conn-name:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          Defines a connection name that will be displayed, if the cpu or
+          arm,cs-dev-assoc properties are not being used in this connection.
+          Principle use for CTI that are connected to non-CoreSight devices, or
+          external IO.
+
+    anyOf:
+      - required:
+          - arm,trig-in-sigs
+      - required:
+          - arm,trig-out-sigs
+    oneOf:
+      - required:
+          - arm,trig-conn-name
+      - required:
+          - cpu
+      - required:
+          - arm,cs-dev-assoc
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-cti-v8-arch
+
+then:
+  required:
+    - cpu
+
+unevaluatedProperties: false
+
+examples:
+  # minimum CTI definition. DEVID register used to set number of triggers.
+  - |
+    cti@20020000 {
+      compatible = "arm,coresight-cti", "arm,primecell";
+      reg = <0x20020000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+    };
+  #  v8 architecturally defined CTI - CPU + ETM connections generated by the
+  #  driver according to the v8 architecture specification.
+  - |
+    cti@859000 {
+      compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
+                   "arm,primecell";
+      reg = <0x859000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+
+      cpu = <&CPU1>;
+      arm,cs-dev-assoc = <&etm1>;
+    };
+  # Implementation defined CTI - CPU + ETM connections explicitly defined..
+  # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h
+  # #size-cells and #address-cells are required if trig-conns@ nodes present.
+  - |
+    #include <dt-bindings/arm/coresight-cti-dt.h>
+
+    cti@858000 {
+      compatible = "arm,coresight-cti", "arm,primecell";
+      reg = <0x858000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+
+      arm,cti-ctm-id = <1>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      trig-conns@0 {
+            reg = <0>;
+            arm,trig-in-sigs = <4 5 6 7>;
+            arm,trig-in-types = <ETM_EXTOUT
+                                 ETM_EXTOUT
+                                 ETM_EXTOUT
+                                 ETM_EXTOUT>;
+            arm,trig-out-sigs = <4 5 6 7>;
+            arm,trig-out-types = <ETM_EXTIN
+                                  ETM_EXTIN
+                                  ETM_EXTIN
+                                  ETM_EXTIN>;
+            arm,cs-dev-assoc = <&etm0>;
+      };
+
+      trig-conns@1 {
+            reg = <1>;
+            cpu = <&CPU0>;
+            arm,trig-in-sigs = <0 1>;
+            arm,trig-in-types = <PE_DBGTRIGGER
+                                 PE_PMUIRQ>;
+            arm,trig-out-sigs=<0 1 2 >;
+            arm,trig-out-types = <PE_EDBGREQ
+                                  PE_DBGRESTART
+                                  PE_CTIIRQ>;
+
+            arm,trig-filters = <0>;
+      };
+    };
+  # Implementation defined CTI - non CoreSight component connections.
+  - |
+    cti@20110000 {
+      compatible = "arm,coresight-cti", "arm,primecell";
+      reg = <0x20110000 0x1000>;
+
+      clocks = <&soc_smc50mhz>;
+      clock-names = "apb_pclk";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      trig-conns@0 {
+        reg = <0>;
+        arm,trig-in-sigs=<0>;
+        arm,trig-in-types=<GEN_INTREQ>;
+        arm,trig-out-sigs=<0>;
+        arm,trig-out-types=<GEN_HALTREQ>;
+        arm,trig-conn-name = "sys_profiler";
+      };
+
+      trig-conns@1 {
+        reg = <1>;
+        arm,trig-out-sigs=<2 3>;
+        arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-conn-name = "watchdog";
+      };
+
+      trig-conns@2 {
+        reg = <2>;
+        arm,trig-in-sigs=<1 6>;
+        arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-conn-name = "g_counter";
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
new file mode 100644
index 000000000000..44a1041cb0fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-funnel.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dynamic-funnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Programmable Trace Bus Funnel
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight funnel merges 2-8 trace sources into a single trace
+  stream with programmable enable and priority of input ports.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-dynamic-funnel
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-dynamic-funnel
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port(@[0-7])?$':
+        description: Input connections from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    funnel@20040000 {
+        compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+        reg = <0x20040000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                funnel_out_port0: endpoint {
+                    remote-endpoint = <&replicator_in_port0>;
+                };
+            };
+        };
+
+        in-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                funnel_in_port0: endpoint {
+                    remote-endpoint = <&ptm0_out_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                funnel_in_port1: endpoint {
+                    remote-endpoint = <&ptm1_out_port>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                funnel_in_port2: endpoint {
+                    remote-endpoint = <&etm0_out_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
new file mode 100644
index 000000000000..03792e9bd97a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-dynamic-replicator.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-dynamic-replicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Coresight Programmable Trace Bus Replicator
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight replicator splits a single trace stream into two trace streams
+  for systems that have more than one trace sink component.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-dynamic-replicator
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-dynamic-replicator
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  qcom,replicator-loses-context:
+    type: boolean
+    description:
+      Indicates that the replicator will lose register context when AMBA clock
+      is removed which is observed in some replicator designs.
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port(@[01])?$':
+        description: Output connections to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    replicator@20120000 {
+        compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+        reg = <0x20120000 0x1000>;
+
+        clocks = <&soc_smc50mhz>;
+        clock-names = "apb_pclk";
+
+        out-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* replicator output ports */
+            port@0 {
+                reg = <0>;
+                replicator_out_port0: endpoint {
+                    remote-endpoint = <&tpiu_in_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                replicator_out_port1: endpoint {
+                    remote-endpoint = <&etr_in_port>;
+                };
+            };
+        };
+        in-ports {
+            port {
+                replicator_in_port0: endpoint {
+                    remote-endpoint = <&csys2_funnel_out_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
new file mode 100644
index 000000000000..90679788e0bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etb10.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-etb10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Embedded Trace Buffer
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The CoreSight Embedded Trace Buffer stores traces in a dedicated SRAM that is
+  used as a circular buffer.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-etb10
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-etb10
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    etb@20010000 {
+        compatible = "arm,coresight-etb10", "arm,primecell";
+        reg = <0x20010000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        in-ports {
+            port {
+                etb_in_port: endpoint {
+                    remote-endpoint = <&replicator_out_port0>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
new file mode 100644
index 000000000000..01200f67504a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-etm.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-etm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Embedded Trace MacroCell
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Embedded Trace Macrocell (ETM) is a real-time trace module providing
+  instruction and data tracing of a processor.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,coresight-etm3x
+          - arm,coresight-etm4x
+          - arm,coresight-etm4x-sysreg
+  required:
+    - compatible
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: arm,coresight-etm4x-sysreg
+    then:
+      $ref: /schemas/arm/primecell.yaml#
+      required:
+        - reg
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          Embedded Trace Macrocell with memory mapped access.
+        items:
+          - enum:
+              - arm,coresight-etm3x
+              - arm,coresight-etm4x
+          - const: arm,primecell
+      - description:
+          Embedded Trace Macrocell (version 4.x), with system register access only
+        const: arm,coresight-etm4x-sysreg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  arm,coresight-loses-context-with-cpu:
+    type: boolean
+    description:
+      Indicates that the hardware will lose register context on CPU power down
+      (e.g. CPUIdle). An example of where this may be needed are systems which
+      contain a coresight component and CPU in the same power domain. When the
+      CPU powers down the coresight component also powers down and loses its
+      context.
+
+  arm,cp14:
+    type: boolean
+    description:
+      Must be present if the system accesses ETM/PTM management registers via
+      co-processor 14.
+
+  qcom,skip-power-up:
+    type: boolean
+    description:
+      Indicates that an implementation can skip powering up the trace unit.
+      TRCPDCR.PU does not have to be set on Qualcomm Technologies Inc. systems
+      since ETMs are in the same power domain as their CPU cores. This property
+      is required to identify such systems with hardware errata where the CPU
+      watchdog counter is stopped when TRCPDCR.PU is set.
+
+  cpu:
+    description:
+      phandle to the cpu this ETM is bound to.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection from the ETM to CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - cpu
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ptm@2201c000 {
+        compatible = "arm,coresight-etm3x", "arm,primecell";
+        reg = <0x2201c000 0x1000>;
+
+        cpu = <&cpu0>;
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                ptm0_out_port: endpoint {
+                    remote-endpoint = <&funnel_in_port0>;
+                };
+            };
+        };
+    };
+
+    ptm@2201d000 {
+        compatible = "arm,coresight-etm3x", "arm,primecell";
+        reg = <0x2201d000 0x1000>;
+
+        cpu = <&cpu1>;
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                ptm1_out_port: endpoint {
+                    remote-endpoint = <&funnel_in_port1>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
new file mode 100644
index 000000000000..cc8c3baa79b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-funnel.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-static-funnel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Static Trace Bus Funnel
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight static funnel merges 2-8 trace sources into a single trace
+  stream.
+
+properties:
+  compatible:
+    const: arm,coresight-static-funnel
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port@[0-7]$':
+        description: Input connections from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - in-ports
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    funnel {
+        /*
+         * non-configurable replicators don't show up on the
+         * AMBA bus.  As such no need to add "arm,primecell".
+         */
+        compatible = "arm,coresight-static-funnel";
+
+        out-ports {
+            port {
+                combo_funnel_out: endpoint {
+                    remote-endpoint = <&top_funnel_in>;
+                };
+            };
+        };
+
+        in-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                combo_funnel_in0: endpoint {
+                    remote-endpoint = <&cluster0_etf_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                combo_funnel_in1: endpoint {
+                    remote-endpoint = <&cluster1_etf_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
new file mode 100644
index 000000000000..1892a091ac35
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-static-replicator.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-static-replicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Static Trace Bus Replicator
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The Coresight replicator splits a single trace stream into two trace streams
+  for systems that have more than one trace sink component.
+
+properties:
+  compatible:
+    const: arm,coresight-static-replicator
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      '^port@[01]$':
+        description: Output connections to CoreSight Trace bus
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - in-ports
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    replicator {
+        /*
+         * non-configurable replicators don't show up on the
+         * AMBA bus.  As such no need to add "arm,primecell".
+         */
+        compatible = "arm,coresight-static-replicator";
+
+        out-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* replicator output ports */
+            port@0 {
+                reg = <0>;
+                replicator_out_port0: endpoint {
+                    remote-endpoint = <&etb_in_port>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                replicator_out_port1: endpoint {
+                    remote-endpoint = <&tpiu_in_port>;
+                };
+            };
+        };
+
+        in-ports {
+            port {
+                replicator_in_port0: endpoint {
+                    remote-endpoint = <&funnel_out_port0>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
new file mode 100644
index 000000000000..378380c3f5aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-stm.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-stm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight System Trace MacroCell
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The STM is a trace source that is integrated into a CoreSight system, designed
+  primarily for high-bandwidth trace of instrumentation embedded into software.
+  This instrumentation is made up of memory-mapped writes to the STM Advanced
+  eXtensible Interface (AXI) slave, which carry information about the behavior
+  of the software.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-stm
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-stm
+      - const: arm,primecell
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: stm-base
+      - const: stm-stimulus-base
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Output connection to the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - out-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    stm@20100000 {
+        compatible = "arm,coresight-stm", "arm,primecell";
+        reg = <0x20100000 0x1000>,
+              <0x28000000 0x180000>;
+        reg-names = "stm-base", "stm-stimulus-base";
+
+        clocks = <&soc_smc50mhz>;
+        clock-names = "apb_pclk";
+        out-ports {
+            port {
+                stm_out_port: endpoint {
+                    remote-endpoint = <&main_funnel_in_port2>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
new file mode 100644
index 000000000000..cb8dceaca70e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tmc.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-tmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Trace Memory Controller
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  Trace Memory Controller is used for Embedded Trace Buffer(ETB), Embedded Trace
+  FIFO(ETF) and Embedded Trace Router(ETR) configurations. The configuration
+  mode (ETB, ETF, ETR) is discovered at boot time when the device is probed.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-tmc
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-tmc
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  arm,buffer-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Size of contiguous buffer space for TMC ETR (embedded trace router). The
+      buffer size can be configured dynamically via buffer_size property in
+      sysfs instead.
+
+  arm,scatter-gather:
+    type: boolean
+    description:
+      Indicates that the TMC-ETR can safely use the SG mode on this system.
+
+  arm,max-burst-size:
+    description:
+      The maximum burst size initiated by TMC on the AXI master interface. The
+      burst size can be in the range [0..15], the setting supports one data
+      transfer per burst up to a maximum of 16 data transfers per burst.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+  out-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: AXI or ATB Master output connection. Used for ETR
+          and ETF configurations.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    etr@20070000 {
+        compatible = "arm,coresight-tmc", "arm,primecell";
+        reg = <0x20070000 0x1000>;
+
+        clocks = <&oscclk6a>;
+        clock-names = "apb_pclk";
+        in-ports {
+            port {
+                etr_in_port: endpoint {
+                    remote-endpoint = <&replicator2_out_port0>;
+                };
+            };
+        };
+
+        out-ports {
+            port {
+                etr_out_port: endpoint {
+                    remote-endpoint = <&catu_in_port>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
new file mode 100644
index 000000000000..61a0cdc27745
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-tpiu.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,coresight-tpiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm CoreSight Trace Port Interface Unit
+
+maintainers:
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+  - Mike Leach <mike.leach@linaro.org>
+  - Leo Yan <leo.yan@linaro.org>
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+
+description: |
+  CoreSight components are compliant with the ARM CoreSight architecture
+  specification and can be connected in various topologies to suit a particular
+  SoCs tracing needs. These trace components can generally be classified as
+  sinks, links and sources. Trace data produced by one or more sources flows
+  through the intermediate links connecting the source to the currently selected
+  sink.
+
+  The CoreSight Trace Port Interface Unit captures trace data from the trace bus
+  and outputs it to an external trace port.
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,coresight-tpiu
+  required:
+    - compatible
+
+allOf:
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: arm,coresight-tpiu
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: apb_pclk
+      - const: atclk
+
+  power-domains:
+    maxItems: 1
+
+  in-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    additionalProperties: false
+
+    properties:
+      port:
+        description: Input connection from the CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    tpiu@e3c05000 {
+        compatible = "arm,coresight-tpiu", "arm,primecell";
+        reg = <0xe3c05000 0x1000>;
+
+        clocks = <&clk_375m>;
+        clock-names = "apb_pclk";
+        in-ports {
+            port {
+                tpiu_in_port: endpoint {
+                    remote-endpoint = <&funnel4_out_port0>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml
new file mode 100644
index 000000000000..693f3fe7be60
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,corstone1000.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,corstone1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Corstone1000
+
+maintainers:
+  - Vishnu Banavath <vishnu.banavath@arm.com>
+  - Rui Miguel Silva <rui.silva@linaro.org>
+
+description: |+
+  ARM's Corstone1000 includes pre-verified Corstone SSE-710 subsystem that
+  provides a flexible compute architecture that combines Cortex‑A and Cortex‑M
+  processors.
+
+  Support for Cortex‑A32, Cortex‑A35 and Cortex‑A53 processors. Two expansion
+  systems for M-Class (or other) processors for adding sensors, connectivity,
+  video, audio and machine learning at the edge System and security IPs to build
+  a secure SoC for a range of rich IoT applications, for example gateways, smart
+  cameras and embedded systems.
+
+  Integrated Secure Enclave providing hardware Root of Trust and supporting
+  seamless integration of the optional CryptoCell™-312 cryptographic
+  accelerator.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Corstone1000 MPS3 it has 1 Cortex-A35 CPU core in a FPGA
+          implementation of the Corstone1000 in the MPS3 prototyping board. See
+          ARM document DAI0550.
+        items:
+          - const: arm,corstone1000-mps3
+      - description: Corstone1000 FVP is the Fixed Virtual Platform
+          implementation of this system. See ARM ecosystems FVP's.
+        items:
+          - const: arm,corstone1000-fvp
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
new file mode 100644
index 000000000000..108460627d9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# Copyright 2021, Arm Ltd
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/arm,embedded-trace-extension.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ARM Embedded Trace Extensions
+
+maintainers:
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+  - Mathieu Poirier <mathieu.poirier@linaro.org>
+
+description: |
+  Arm Embedded Trace Extension(ETE) is a per CPU trace component that
+  allows tracing the CPU execution. It overlaps with the CoreSight ETMv4
+  architecture and has extended support for future architecture changes.
+  The trace generated by the ETE could be stored via legacy CoreSight
+  components (e.g, TMC-ETR) or other means (e.g, using a per CPU buffer
+  Arm Trace Buffer Extension (TRBE)). Since the ETE can be connected to
+  legacy CoreSight components, a node must be listed per instance, along
+  with any optional connection graph as per the coresight bindings.
+
+properties:
+  $nodename:
+    pattern: "^ete([0-9a-f]+)$"
+  compatible:
+    items:
+      - const: arm,embedded-trace-extension
+
+  cpu:
+    description: |
+      Handle to the cpu this ETE is bound to.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  power-domains:
+    maxItems: 1
+
+  out-ports:
+    description: |
+      Output connections from the ETE to legacy CoreSight trace bus.
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port:
+        description: Output connection from the ETE to legacy CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - cpu
+
+additionalProperties: false
+
+examples:
+
+# An ETE node without legacy CoreSight connections
+  - |
+    ete0 {
+      compatible = "arm,embedded-trace-extension";
+      cpu = <&cpu_0>;
+    };
+# An ETE node with legacy CoreSight connections
+  - |
+   ete1 {
+      compatible = "arm,embedded-trace-extension";
+      cpu = <&cpu_1>;
+
+      out-ports {        /* legacy coresight connection */
+         port {
+             ete1_out_port: endpoint {
+                remote-endpoint = <&funnel_in_port0>;
+             };
+         };
+      };
+   };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
index 528eee64290a..98ff5698ae1f 100644
--- a/Documentation/devicetree/bindings/arm/arm,integrator.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/arm,integrator.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM Integrator Boards Device Tree Bindings
+title: ARM Integrator Boards
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/arm,realview.yaml b/Documentation/devicetree/bindings/arm/arm,realview.yaml
index 4f9b21f49e84..8d3ed2e4ed31 100644
--- a/Documentation/devicetree/bindings/arm/arm,realview.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,realview.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/arm,realview.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM RealView Boards Device Tree Bindings
+title: ARM RealView Boards
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml
new file mode 100644
index 000000000000..b1322658063a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# Copyright 2021, Arm Ltd
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/arm,trace-buffer-extension.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ARM Trace Buffer Extensions
+
+maintainers:
+  - Anshuman Khandual <anshuman.khandual@arm.com>
+
+description: |
+  Arm Trace Buffer Extension (TRBE) is a per CPU component
+  for storing trace generated on the CPU to memory. It is
+  accessed via CPU system registers. The software can verify
+  if it is permitted to use the component by checking the
+  TRBIDR register.
+
+properties:
+  $nodename:
+    const: "trbe"
+  compatible:
+    items:
+      - const: arm,trace-buffer-extension
+
+  interrupts:
+    description: |
+       Exactly 1 PPI must be listed. For heterogeneous systems where
+       TRBE is only supported on a subset of the CPUs, please consult
+       the arm,gic-v3 binding for details on describing a PPI partition.
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+
+  - |
+   #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+   trbe {
+     compatible = "arm,trace-buffer-extension";
+     interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+   };
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml
new file mode 100644
index 000000000000..491eef1e1b10
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/arm,versatile-sysreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Versatile system registers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  This is a system control registers block, providing multiple low level
+  platform functions like board detection and identification, software
+  interrupt generation, MMC and NOR Flash control, etc.
+
+properties:
+  compatible:
+    items:
+      - const: arm,versatile-sysreg
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  panel:
+    type: object
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+...
diff --git a/Documentation/devicetree/bindings/arm/arm,versatile.yaml b/Documentation/devicetree/bindings/arm/arm,versatile.yaml
index 34b437c72751..13e52ba92060 100644
--- a/Documentation/devicetree/bindings/arm/arm,versatile.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,versatile.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/arm,versatile.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM Versatile Boards Device Tree Bindings
+title: ARM Versatile Boards
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
index 55ef656d1192..09c319f803ba 100644
--- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/arm,vexpress-juno.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM Versatile Express and Juno Boards Device Tree Bindings
+title: ARM Versatile Express and Juno Boards
 
 maintainers:
   - Sudeep Holla <sudeep.holla@arm.com>
@@ -119,22 +119,6 @@ properties:
           - const: arm,foundation-aarch64
           - const: arm,vexpress
 
-  arm,hbi:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
-    description: This indicates the ARM HBI (Hardware Board ID), this is
-      ARM's unique board model ID, visible on the PCB's silkscreen.
-
-  arm,vexpress,site:
-    description: As Versatile Express can be configured in number of physically
-      different setups, the device tree should describe platform topology.
-      For this reason the root node and main motherboard node must define this
-      property, describing the physical location of the children nodes.
-      0 means motherboard site, while 1 and 2 are daughterboard sites, and
-      0xf means "sisterboard" which is the site containing the main CPU tile.
-    $ref: '/schemas/types.yaml#/definitions/uint32'
-    minimum: 0
-    maximum: 15
-
   arm,vexpress,position:
     description: When daughterboards are stacked on one site, their position
       in the stack be be described this attribute.
@@ -154,12 +138,13 @@ patternProperties:
     description: Static Memory Bus (SMB) node, if this exists it describes
       the connection between the motherboard and any tiles. Sometimes the
       compatible is placed directly under this node, sometimes it is placed
-      in a subnode named "motherboard". Sometimes the compatible includes
+      in a subnode named "motherboard-bus". Sometimes the compatible includes
       "arm,vexpress,v2?-p1" sometimes (on software models) is is just
-      "simple-bus". If the compatible is placed in the "motherboard" node,
+      "simple-bus". If the compatible is placed in the "motherboard-bus" node,
       it is stricter and always has two compatibles.
     type: object
     $ref: '/schemas/simple-bus.yaml'
+    unevaluatedProperties: false
 
     properties:
       compatible:
@@ -170,7 +155,9 @@ patternProperties:
                   - arm,vexpress,v2p-p1
               - const: simple-bus
           - const: simple-bus
-      motherboard:
+
+    patternProperties:
+      '^motherboard-bus@':
         type: object
         description: The motherboard description provides a single "motherboard"
           node using 2 address cells corresponding to the Static Memory Bus
@@ -183,6 +170,8 @@ patternProperties:
             const: 2
           "#size-cells":
             const: 1
+          ranges: true
+
           compatible:
             items:
               - enum:
@@ -196,8 +185,28 @@ patternProperties:
               - rs1
               - rs2
 
+          arm,hbi:
+            $ref: '/schemas/types.yaml#/definitions/uint32'
+            description: This indicates the ARM HBI (Hardware Board ID), this is
+              ARM's unique board model ID, visible on the PCB's silkscreen.
+
+          arm,vexpress,site:
+            description: As Versatile Express can be configured in number of physically
+              different setups, the device tree should describe platform topology.
+              For this reason the root node and main motherboard node must define this
+              property, describing the physical location of the children nodes.
+              0 means motherboard site, while 1 and 2 are daughterboard sites, and
+              0xf means "sisterboard" which is the site containing the main CPU tile.
+            $ref: '/schemas/types.yaml#/definitions/uint32'
+            minimum: 0
+            maximum: 15
+
         required:
           - compatible
+
+        additionalProperties:
+          type: object
+
     required:
       - compatible
 
diff --git a/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt b/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt
deleted file mode 100644
index 6efabba530f1..000000000000
--- a/Documentation/devicetree/bindings/arm/arm-dsu-pmu.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU)
-
-ARM DyanmIQ Shared Unit (DSU) integrates one or more CPU cores
-with a shared L3 memory system, control logic and external interfaces to
-form a multicore cluster. The PMU enables to gather various statistics on
-the operations of the DSU. The PMU provides independent 32bit counters that
-can count any of the supported events, along with a 64bit cycle counter.
-The PMU is accessed via CPU system registers and has no MMIO component.
-
-** DSU PMU required properties:
-
-- compatible	: should be one of :
-
-		"arm,dsu-pmu"
-
-- interrupts	: Exactly 1 SPI must be listed.
-
-- cpus		: List of phandles for the CPUs connected to this DSU instance.
-
-
-** Example:
-
-dsu-pmu-0 {
-	compatible = "arm,dsu-pmu";
-	interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>;
-	cpus = <&cpu_0>, <&cpu_1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml
new file mode 100644
index 000000000000..c72aab706484
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed,sbc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+# Copyright 2021 Joel Stanley, IBM Corp.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/aspeed/aspeed,sbc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ASPEED Secure Boot Controller
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description: |
+  The ASPEED SoCs have a register bank for interacting with the secure boot
+  controller.
+
+properties:
+  compatible:
+    items:
+      - const: aspeed,ast2600-sbc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    sbc: secure-boot-controller@1e6f2000 {
+            compatible = "aspeed,ast2600-sbc";
+            reg = <0x1e6f2000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
new file mode 100644
index 000000000000..e0eff4c05879
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/aspeed/aspeed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SoC based boards
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: AST2400 based boards
+        items:
+          - enum:
+              - delta,ahe50dc-bmc
+              - facebook,galaxy100-bmc
+              - facebook,wedge100-bmc
+              - facebook,wedge40-bmc
+              - microsoft,olympus-bmc
+              - quanta,q71l-bmc
+              - tyan,palmetto-bmc
+              - yadro,vesnin-bmc
+          - const: aspeed,ast2400
+
+      - description: AST2500 based boards
+        items:
+          - enum:
+              - amd,daytonax-bmc
+              - amd,ethanolx-bmc
+              - ampere,mtjade-bmc
+              - aspeed,ast2500-evb
+              - asrock,e3c246d4i-bmc
+              - asrock,romed8hm3-bmc
+              - bytedance,g220a-bmc
+              - facebook,cmm-bmc
+              - facebook,minipack-bmc
+              - facebook,tiogapass-bmc
+              - facebook,yamp-bmc
+              - facebook,yosemitev2-bmc
+              - facebook,wedge400-bmc
+              - hxt,stardragon4800-rep2-bmc
+              - ibm,mihawk-bmc
+              - ibm,mowgli-bmc
+              - ibm,romulus-bmc
+              - ibm,swift-bmc
+              - ibm,witherspoon-bmc
+              - ingrasys,zaius-bmc
+              - inspur,fp5280g2-bmc
+              - inspur,nf5280m6-bmc
+              - inspur,on5263m5-bmc
+              - intel,s2600wf-bmc
+              - inventec,lanyang-bmc
+              - lenovo,hr630-bmc
+              - lenovo,hr855xg2-bmc
+              - portwell,neptune-bmc
+              - qcom,centriq2400-rep-bmc
+              - supermicro,x11spi-bmc
+              - tyan,s7106-bmc
+              - tyan,s8036-bmc
+              - yadro,nicole-bmc
+              - yadro,vegman-n110-bmc
+              - yadro,vegman-rx20-bmc
+              - yadro,vegman-sx20-bmc
+          - const: aspeed,ast2500
+
+      - description: AST2600 based boards
+        items:
+          - enum:
+              - ampere,mtmitchell-bmc
+              - aspeed,ast2600-evb
+              - aspeed,ast2600-evb-a1
+              - facebook,bletchley-bmc
+              - facebook,cloudripper-bmc
+              - facebook,elbert-bmc
+              - facebook,fuji-bmc
+              - facebook,greatlakes-bmc
+              - ibm,everest-bmc
+              - ibm,rainier-bmc
+              - ibm,tacoma-bmc
+              - inventec,transformer-bmc
+              - jabil,rbp-bmc
+              - qcom,dc-scm-v1-bmc
+              - quanta,s6q-bmc
+              - ufispace,ncplite-bmc
+          - const: aspeed,ast2600
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
index fba071b9af1d..dfb8fd089197 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.yaml
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
@@ -4,11 +4,12 @@
 $id: http://devicetree.org/schemas/arm/atmel-at91.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Atmel AT91 device tree bindings.
+title: Atmel AT91.
 
 maintainers:
   - Alexandre Belloni <alexandre.belloni@bootlin.com>
-  - Ludovic Desroches <ludovic.desroches@microchip.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
 
 description: |
   Boards with a SoC of the Atmel AT91 or SMART family shall have the following
@@ -90,9 +91,11 @@ properties:
           - const: atmel,sama5d2
           - const: atmel,sama5
 
-      - description: SAM9X60-EK board
+      - description: Microchip SAM9X60 Evaluation Boards
         items:
-          - const: microchip,sam9x60ek
+          - enum:
+              - microchip,sam9x60ek
+              - microchip,sam9x60-curiosity
           - const: microchip,sam9x60
           - const: atmel,at91sam9
 
@@ -126,6 +129,25 @@ properties:
           - const: atmel,sama5d3
           - const: atmel,sama5
 
+      - description: Microchip SAMA5D3 Ethernet Development System Board
+        items:
+          - const: microchip,sama5d3-eds
+          - const: atmel,sama5d36
+          - const: atmel,sama5d3
+          - const: atmel,sama5
+
+      - description: CalAmp LMU5000 board
+        items:
+          - const: calamp,lmu5000
+          - const: atmel,at91sam9g20
+          - const: atmel,at91sam9
+
+      - description: Exegin Q5xR5 board
+        items:
+          - const: exegin,q5xr5
+          - const: atmel,at91sam9g20
+          - const: atmel,at91sam9
+
       - items:
           - enum:
               - atmel,sama5d31
@@ -150,6 +172,29 @@ properties:
           - const: microchip,sama7g5
           - const: microchip,sama7
 
+      - description: Microchip LAN9662 Evaluation Boards.
+        items:
+          - enum:
+              - microchip,lan9662-pcb8291
+              - microchip,lan9662-pcb8309
+          - const: microchip,lan9662
+          - const: microchip,lan966
+
+      - description: Microchip LAN9668 PCB8290 Evaluation Board.
+        items:
+          - const: microchip,lan9668-pcb8290
+          - const: microchip,lan9668
+          - const: microchip,lan966
+
+      - description: Kontron KSwitch D10 MMT series
+        items:
+          - enum:
+              - kontron,kswitch-d10-mmt-8g
+              - kontron,kswitch-d10-mmt-6g-2gs
+          - const: kontron,s1921
+          - const: microchip,lan9668
+          - const: microchip,lan966
+
       - items:
           - enum:
               - atmel,sams70j19
diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index 16eef600d599..ab1b352344ae 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -25,21 +25,6 @@ System Timer (ST) required properties:
 Its subnodes can be:
 - watchdog: compatible should be "atmel,at91rm9200-wdt"
 
-RSTC Reset Controller required properties:
-- compatible: Should be "atmel,<chip>-rstc".
-  <chip> can be "at91sam9260", "at91sam9g45", "sama5d3" or "samx7"
-  it also can be "microchip,sam9x60-rstc"
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-Example:
-
-	rstc@fffffd00 {
-		compatible = "atmel,at91sam9260-rstc";
-		reg = <0xfffffd00 0x10>;
-		clocks = <&clk32k>;
-	};
-
 RAMC SDRAM/DDR Controller required properties:
 - compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
 			"atmel,at91sam9260-sdramc",
diff --git a/Documentation/devicetree/bindings/arm/axxia.yaml b/Documentation/devicetree/bindings/arm/axxia.yaml
index e0d2bb71cf50..d60907e43efc 100644
--- a/Documentation/devicetree/bindings/arm/axxia.yaml
+++ b/Documentation/devicetree/bindings/arm/axxia.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/axxia.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Axxia AXM55xx device tree bindings
+title: Axxia AXM55xx
 
 maintainers:
   - Anders Berg <anders.berg@lsi.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
index 230b80d9d6cf..162a39dab218 100644
--- a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/bcm2835.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM2711/BCM2835 Platforms Device Tree Bindings
+title: Broadcom BCM2711/BCM2835 Platforms
 
 maintainers:
   - Eric Anholt <eric@anholt.net>
@@ -19,6 +19,7 @@ properties:
         items:
           - enum:
               - raspberrypi,400
+              - raspberrypi,4-compute-module
               - raspberrypi,4-model-b
           - const: brcm,bcm2711
 
@@ -50,6 +51,7 @@ properties:
               - raspberrypi,3-model-b-plus
               - raspberrypi,3-compute-module
               - raspberrypi,3-compute-module-lite
+              - raspberrypi,model-zero-2-w
           - const: brcm,bcm2837
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
index c60324357435..f2bcac0096b7 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,bcm11351.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM11351 device tree bindings
+title: Broadcom BCM11351
 
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
index b3020757380f..cf4e254e32f1 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,bcm21664.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM21664 device tree bindings
+title: Broadcom BCM21664
 
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
index 37f3a6fcde76..eafec29ba7ab 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,bcm23550.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM23550 device tree bindings
+title: Broadcom BCM23550
 
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
index 434d3c6db61e..454b0e93245d 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4708.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM4708 device tree bindings
+title: Broadcom BCM4708
 
 description:
   Broadcom BCM4708/47081/4709/47094/53012 Wi-Fi/network SoCs based
@@ -64,7 +64,9 @@ properties:
       - description: BCM47094 based boards
         items:
           - enum:
+              - asus,rt-ac88u
               - dlink,dir-885l
+              - dlink,dir-890l
               - linksys,panamera
               - luxul,abr-4500-v1
               - luxul,xap-1610-v1
@@ -83,9 +85,22 @@ properties:
               - brcm,bcm953012er
               - brcm,bcm953012hr
               - brcm,bcm953012k
+          - const: brcm,bcm53012
+          - const: brcm,bcm4708
+
+      - description: BCM53015 based boards
+        items:
+          - enum:
+              - meraki,mr26
+          - const: brcm,bcm53015
+          - const: brcm,bcm4708
+
+      - description: BCM53016 based boards
+        items:
+          - enum:
+              - dlink,dwl-8610ap
               - meraki,mr32
-          - const: brcm,brcm53012
-          - const: brcm,brcm53016
+          - const: brcm,bcm53016
           - const: brcm,bcm4708
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
deleted file mode 100644
index 2cd4e4a32278..000000000000
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
+++ /dev/null
@@ -1,41 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4908.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Broadcom BCM4908 device tree bindings
-
-description:
-  Broadcom BCM4906 / BCM4908 / BCM49408 Wi-Fi/network SoCs with Brahma CPUs.
-
-maintainers:
-  - Rafał Miłecki <rafal@milecki.pl>
-
-properties:
-  $nodename:
-    const: '/'
-  compatible:
-    oneOf:
-      - description: BCM4906 based boards
-        items:
-          - enum:
-              - netgear,r8000p
-              - tplink,archer-c2300-v1
-          - const: brcm,bcm4906
-          - const: brcm,bcm4908
-
-      - description: BCM4908 based boards
-        items:
-          - enum:
-              - asus,gt-ac5300
-          - const: brcm,bcm4908
-
-      - description: BCM49408 based boards
-        items:
-          - const: brcm,bcm49408
-          - const: brcm,bcm4908
-
-additionalProperties: true
-
-...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
index 8c7a4908a849..a8866c6e9d46 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
@@ -30,7 +30,7 @@ Example:
 
 	cpus {
 		cpu@0 {
-			compatible = "arm,cotex-a9";
+			compatible = "arm,cortex-a9";
 			reg = <0>;
 			...
 			enable-method = "brcm,bcm63138";
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
new file mode 100644
index 000000000000..07892cbdd23c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcmbca.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Broadband SoC
+
+description:
+  Broadcom Broadband SoCs include family of high performance DSL/PON/Wireless
+  chips that can be used as home gateway, router and WLAN AP for residential,
+  enterprise and carrier applications.
+
+maintainers:
+  - William Zhang <william.zhang@broadcom.com>
+  - Anand Gore <anand.gore@broadcom.com>
+  - Kursad Oney <kursad.oney@broadcom.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM47622 based boards
+        items:
+          - enum:
+              - brcm,bcm947622
+          - const: brcm,bcm47622
+          - const: brcm,bcmbca
+
+      - description: BCM4906 based boards
+        items:
+          - enum:
+              - netgear,r8000p
+              - tplink,archer-c2300-v1
+          - const: brcm,bcm4906
+          - const: brcm,bcm4908
+          - const: brcm,bcmbca
+
+      - description: BCM4908 based boards
+        items:
+          - enum:
+              - asus,gt-ac5300
+              - brcm,bcm94908
+              - netgear,raxe500
+          - const: brcm,bcm4908
+          - const: brcm,bcmbca
+
+      - description: BCM49408 based boards
+        items:
+          - const: brcm,bcm49408
+          - const: brcm,bcm4908
+          - const: brcm,bcmbca
+
+      - description: BCM4912 based boards
+        items:
+          - enum:
+              - asus,gt-ax6000
+              - brcm,bcm94912
+          - const: brcm,bcm4912
+          - const: brcm,bcmbca
+
+      - description: BCM63138 based boards
+        items:
+          - enum:
+              - brcm,bcm963138
+              - brcm,BCM963138DVT
+          - const: brcm,bcm63138
+          - const: brcm,bcmbca
+
+      - description: BCM63146 based boards
+        items:
+          - enum:
+              - brcm,bcm963146
+          - const: brcm,bcm63146
+          - const: brcm,bcmbca
+
+      - description: BCM63148 based boards
+        items:
+          - enum:
+              - brcm,bcm963148
+          - const: brcm,bcm63148
+          - const: brcm,bcmbca
+
+      - description: BCM63158 based boards
+        items:
+          - enum:
+              - brcm,bcm963158
+          - const: brcm,bcm63158
+          - const: brcm,bcmbca
+
+      - description: BCM63178 based boards
+        items:
+          - enum:
+              - brcm,bcm963178
+          - const: brcm,bcm63178
+          - const: brcm,bcmbca
+
+      - description: BCM6756 based boards
+        items:
+          - enum:
+              - brcm,bcm96756
+          - const: brcm,bcm6756
+          - const: brcm,bcmbca
+
+      - description: BCM6813 based boards
+        items:
+          - enum:
+              - brcm,bcm96813
+          - const: brcm,bcm6813
+          - const: brcm,bcmbca
+
+      - description: BCM6846 based boards
+        items:
+          - enum:
+              - brcm,bcm96846
+          - const: brcm,bcm6846
+          - const: brcm,bcmbca
+
+      - description: BCM6855 based boards
+        items:
+          - enum:
+              - brcm,bcm96855
+          - const: brcm,bcm6855
+          - const: brcm,bcmbca
+
+      - description: BCM6856 based boards
+        items:
+          - enum:
+              - brcm,bcm96856
+          - const: brcm,bcm6856
+          - const: brcm,bcmbca
+
+      - description: BCM6858 based boards
+        items:
+          - enum:
+              - brcm,bcm96858
+          - const: brcm,bcm6858
+          - const: brcm,bcmbca
+
+      - description: BCM6878 based boards
+        items:
+          - enum:
+              - brcm,bcm96878
+          - const: brcm,bcm6878
+          - const: brcm,bcmbca
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
index 104cc9b41df4..071421dbc4d0 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
@@ -187,15 +187,8 @@ Required properties:
 Sequencer DRAM parameters and control registers. Used for Self-Refresh
 Power-Down (SRPD), among other things.
 
-Required properties:
-- compatible     : should contain one of these
-	"brcm,brcmstb-memc-ddr-rev-b.2.1"
-	"brcm,brcmstb-memc-ddr-rev-b.2.2"
-	"brcm,brcmstb-memc-ddr-rev-b.2.3"
-	"brcm,brcmstb-memc-ddr-rev-b.3.0"
-	"brcm,brcmstb-memc-ddr-rev-b.3.1"
-	"brcm,brcmstb-memc-ddr"
-- reg            : the MEMC DDR register range
+See Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml for a
+full list of supported compatible strings and properties.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
index 432ccf990f9e..a0a3f32db54e 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,cygnus.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Cygnus device tree bindings
+title: Broadcom Cygnus
 
 maintainers:
   - Ray Jui <rjui@broadcom.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
index 294948399f82..cc6add0e933a 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,hr2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Hurricane 2 device tree bindings
+title: Broadcom Hurricane 2
 
 description:
   Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
index c4847abbecd8..6696598eca0e 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,ns2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom North Star 2 (NS2) device tree bindings
+title: Broadcom North Star 2 (NS2)
 
 maintainers:
   - Ray Jui <rjui@broadcom.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
index 476bc23a7f75..a43b2d4d936b 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,nsp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Northstar Plus device tree bindings
+title: Broadcom Northstar Plus
 
 description:
   Broadcom Northstar Plus family of SoCs are used for switching control
@@ -22,16 +22,61 @@ properties:
   $nodename:
     const: '/'
   compatible:
-    items:
-      - enum:
-          - brcm,bcm58522
-          - brcm,bcm58525
-          - brcm,bcm58535
-          - brcm,bcm58622
-          - brcm,bcm58623
-          - brcm,bcm58625
-          - brcm,bcm88312
-      - const: brcm,nsp
+    oneOf:
+      - description: BCM58522 based boards
+        items:
+          - enum:
+              - brcm,bcm958522er
+          - const: brcm,bcm58522
+          - const: brcm,nsp
+
+      - description: BCM58525 based boards
+        items:
+          - enum:
+              - brcm,bcm958525er
+              - brcm,bcm958525xmc
+          - const: brcm,bcm58525
+          - const: brcm,nsp
+
+      - description: BCM58535 based boards
+        items:
+          - const: brcm,bcm58535
+          - const: brcm,nsp
+
+      - description: BCM58622 based boards
+        items:
+          - enum:
+              - brcm,bcm958622hr
+          - const: brcm,bcm58622
+          - const: brcm,nsp
+
+      - description: BCM58623 based boards
+        items:
+          - enum:
+              - brcm,bcm958623hr
+          - const: brcm,bcm58623
+          - const: brcm,nsp
+
+      - description: BCM58625 based boards
+        items:
+          - enum:
+              - brcm,bcm958625hr
+              - brcm,bcm958625k
+              - meraki,mx64
+              - meraki,mx64-a0
+              - meraki,mx64w
+              - meraki,mx64w-a0
+              - meraki,mx65
+              - meraki,mx65w
+          - const: brcm,bcm58625
+          - const: brcm,nsp
+
+      - description: BCM88312 based boards
+        items:
+          - enum:
+              - brcm,bcm988312hr
+          - const: brcm,bcm88312
+          - const: brcm,nsp
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
index c638e04ebae0..c6ccb78aab0a 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,stingray.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Stingray device tree bindings
+title: Broadcom Stingray
 
 maintainers:
   - Ray Jui <rjui@broadcom.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
index 4eba182abd53..3f441352fbf0 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bcm/brcm,vulcan-soc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom Vulcan device tree bindings
+title: Broadcom Vulcan
 
 maintainers:
   - Robert Richter <rrichter@marvell.com>
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index b369b374fc4a..39e3c248f5b7 100644
--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -30,6 +30,7 @@ properties:
 
   clocks:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -47,6 +48,7 @@ properties:
 
   reset:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -63,6 +65,7 @@ properties:
 
   pwm:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -76,8 +79,6 @@ properties:
       - compatible
       - "#pwm-cells"
 
-    additionalProperties: false
-
 required:
   - compatible
   - mboxes
diff --git a/Documentation/devicetree/bindings/arm/bitmain.yaml b/Documentation/devicetree/bindings/arm/bitmain.yaml
index 90ba02be48ce..55a5a570b5bc 100644
--- a/Documentation/devicetree/bindings/arm/bitmain.yaml
+++ b/Documentation/devicetree/bindings/arm/bitmain.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/bitmain.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bitmain platform device tree bindings
+title: Bitmain platform
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/calxeda.yaml b/Documentation/devicetree/bindings/arm/calxeda.yaml
index 46f78addebb0..3e9f5e1d862e 100644
--- a/Documentation/devicetree/bindings/arm/calxeda.yaml
+++ b/Documentation/devicetree/bindings/arm/calxeda.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/calxeda.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Calxeda Platforms Device Tree Bindings
+title: Calxeda Platforms
 
 maintainers:
   - Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/arm/cci-control-port.yaml b/Documentation/devicetree/bindings/arm/cci-control-port.yaml
new file mode 100644
index 000000000000..c29d250a6d77
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cci-control-port.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cci-control-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CCI Interconnect Bus Masters
+
+maintainers:
+  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+
+description: |
+  Masters in the device tree connected to a CCI port (inclusive of CPUs
+  and their cpu nodes).
+
+select: true
+
+properties:
+  cci-control-port:
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+additionalProperties: true
+
+examples:
+  - |
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a15";
+            device_type = "cpu";
+            cci-control-port = <&cci_control1>;
+            reg = <0>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
deleted file mode 100644
index 9600761f2d5b..000000000000
--- a/Documentation/devicetree/bindings/arm/cci.txt
+++ /dev/null
@@ -1,224 +0,0 @@
-=======================================================
-ARM CCI cache coherent interconnect binding description
-=======================================================
-
-ARM multi-cluster systems maintain intra-cluster coherency through a
-cache coherent interconnect (CCI) that is capable of monitoring bus
-transactions and manage coherency, TLB invalidations and memory barriers.
-
-It allows snooping and distributed virtual memory message broadcast across
-clusters, through memory mapped interface, with a global control register
-space and multiple sets of interface control registers, one per slave
-interface.
-
-* CCI interconnect node
-
-	Description: Describes a CCI cache coherent Interconnect component
-
-	Node name must be "cci".
-	Node's parent must be the root node /, and the address space visible
-	through the CCI interconnect is the same as the one seen from the
-	root node (ie from CPUs perspective as per DT standard).
-	Every CCI node has to define the following properties:
-
-	- compatible
-		Usage: required
-		Value type: <string>
-		Definition: must contain one of the following:
-			    "arm,cci-400"
-			    "arm,cci-500"
-			    "arm,cci-550"
-
-	- reg
-		Usage: required
-		Value type: Integer cells. A register entry, expressed as a pair
-			    of cells, containing base and size.
-		Definition: A standard property. Specifies base physical
-			    address of CCI control registers common to all
-			    interfaces.
-
-	- ranges:
-		Usage: required
-		Value type: Integer cells. An array of range entries, expressed
-			    as a tuple of cells, containing child address,
-			    parent address and the size of the region in the
-			    child address space.
-		Definition: A standard property. Follow rules in the Devicetree
-			    Specification for hierarchical bus addressing. CCI
-			    interfaces addresses refer to the parent node
-			    addressing scheme to declare their register bases.
-
-	CCI interconnect node can define the following child nodes:
-
-	- CCI control interface nodes
-
-		Node name must be "slave-if".
-		Parent node must be CCI interconnect node.
-
-		A CCI control interface node must contain the following
-		properties:
-
-		- compatible
-			Usage: required
-			Value type: <string>
-			Definition: must be set to
-				    "arm,cci-400-ctrl-if"
-
-		- interface-type:
-			Usage: required
-			Value type: <string>
-			Definition: must be set to one of {"ace", "ace-lite"}
-				    depending on the interface type the node
-				    represents.
-
-		- reg:
-			Usage: required
-			Value type: Integer cells. A register entry, expressed
-				    as a pair of cells, containing base and
-				    size.
-			Definition: the base address and size of the
-				    corresponding interface programming
-				    registers.
-
-	- CCI PMU node
-
-		Parent node must be CCI interconnect node.
-
-		A CCI pmu node must contain the following properties:
-
-		- compatible
-			Usage: required
-			Value type: <string>
-			Definition: Must contain one of:
-				 "arm,cci-400-pmu,r0"
-				 "arm,cci-400-pmu,r1"
-				 "arm,cci-400-pmu"  - DEPRECATED, permitted only where OS has
-						      secure access to CCI registers
-				 "arm,cci-500-pmu,r0"
-				 "arm,cci-550-pmu,r0"
-		- reg:
-			Usage: required
-			Value type: Integer cells. A register entry, expressed
-				    as a pair of cells, containing base and
-				    size.
-			Definition: the base address and size of the
-				    corresponding interface programming
-				    registers.
-
-		- interrupts:
-			Usage: required
-			Value type: Integer cells. Array of interrupt specifier
-				    entries, as defined in
-				    ../interrupt-controller/interrupts.txt.
-			Definition: list of counter overflow interrupts, one per
-				    counter. The interrupts must be specified
-				    starting with the cycle counter overflow
-				    interrupt, followed by counter0 overflow
-				    interrupt, counter1 overflow interrupt,...
-				    ,counterN overflow interrupt.
-
-				    The CCI PMU has an interrupt signal for each
-				    counter. The number of interrupts must be
-				    equal to the number of counters.
-
-* CCI interconnect bus masters
-
-	Description: masters in the device tree connected to a CCI port
-		     (inclusive of CPUs and their cpu nodes).
-
-	A CCI interconnect bus master node must contain the following
-	properties:
-
-	- cci-control-port:
-		Usage: required
-		Value type: <phandle>
-		Definition: a phandle containing the CCI control interface node
-			    the master is connected to.
-
-Example:
-
-	cpus {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			cci-control-port = <&cci_control1>;
-			reg = <0x0>;
-		};
-
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			cci-control-port = <&cci_control1>;
-			reg = <0x1>;
-		};
-
-		CPU2: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			cci-control-port = <&cci_control2>;
-			reg = <0x100>;
-		};
-
-		CPU3: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			cci-control-port = <&cci_control2>;
-			reg = <0x101>;
-		};
-
-	};
-
-	dma0: dma@3000000 {
-		compatible = "arm,pl330", "arm,primecell";
-		cci-control-port = <&cci_control0>;
-		reg = <0x0 0x3000000 0x0 0x1000>;
-		interrupts = <10>;
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <32>;
-	};
-
-	cci@2c090000 {
-		compatible = "arm,cci-400";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x0 0x2c090000 0 0x1000>;
-		ranges = <0x0 0x0 0x2c090000 0x10000>;
-
-		cci_control0: slave-if@1000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace-lite";
-			reg = <0x1000 0x1000>;
-		};
-
-		cci_control1: slave-if@4000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x4000 0x1000>;
-		};
-
-		cci_control2: slave-if@5000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x5000 0x1000>;
-		};
-
-		pmu@9000 {
-			 compatible = "arm,cci-400-pmu";
-			 reg = <0x9000 0x5000>;
-			 interrupts = <0 101 4>,
-				      <0 102 4>,
-				      <0 103 4>,
-				      <0 104 4>,
-				      <0 105 4>;
-		};
-	};
-
-This CCI node corresponds to a CCI component whose control registers sits
-at address 0x000000002c090000.
-CCI slave interface @0x000000002c091000 is connected to dma controller dma0.
-CCI slave interface @0x000000002c094000 is connected to CPUs {CPU0, CPU1};
-CCI slave interface @0x000000002c095000 is connected to CPUs {CPU2, CPU3};
diff --git a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt b/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
deleted file mode 100644
index f1de3247c1b7..000000000000
--- a/Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* CoreSight CPU Debug Component:
-
-CoreSight CPU debug component are compliant with the ARMv8 architecture
-reference manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The
-external debug module is mainly used for two modes: self-hosted debug and
-external debug, and it can be accessed from mmio region from Coresight
-and eventually the debug module connects with CPU for debugging. And the
-debug module provides sample-based profiling extension, which can be used
-to sample CPU program counter, secure state and exception level, etc;
-usually every CPU has one dedicated debug module to be connected.
-
-Required properties:
-
-- compatible : should be "arm,coresight-cpu-debug"; supplemented with
-               "arm,primecell" since this driver is using the AMBA bus
-	       interface.
-
-- reg : physical base address and length of the register set.
-
-- clocks : the clock associated to this component.
-
-- clock-names : the name of the clock referenced by the code. Since we are
-                using the AMBA framework, the name of the clock providing
-		the interconnect should be "apb_pclk" and the clock is
-		mandatory. The interface between the debug logic and the
-		processor core is clocked by the internal CPU clock, so it
-		is enabled with CPU clock by default.
-
-- cpu : the CPU phandle the debug module is affined to. Do not assume it
-        to default to CPU0 if omitted.
-
-Optional properties:
-
-- power-domains: a phandle to the debug power domain. We use "power-domains"
-                 binding to turn on the debug logic if it has own dedicated
-		 power domain and if necessary to use "cpuidle.off=1" or
-		 "nohlt" in the kernel command line or sysfs node to
-		 constrain idle states to ensure registers in the CPU power
-		 domain are accessible.
-
-Example:
-
-	debug@f6590000 {
-		compatible = "arm,coresight-cpu-debug","arm,primecell";
-		reg = <0 0xf6590000 0 0x1000>;
-		clocks = <&sys_ctrl HI6220_DAPB_CLK>;
-		clock-names = "apb_pclk";
-		cpu = <&cpu0>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/coresight-cti.yaml b/Documentation/devicetree/bindings/arm/coresight-cti.yaml
deleted file mode 100644
index 21e3515491f4..000000000000
--- a/Documentation/devicetree/bindings/arm/coresight-cti.yaml
+++ /dev/null
@@ -1,332 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-# Copyright 2019 Linaro Ltd.
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/coresight-cti.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: ARM Coresight Cross Trigger Interface (CTI) device.
-
-description: |
-  The CoreSight Embedded Cross Trigger (ECT) consists of CTI devices connected
-  to one or more CoreSight components and/or a CPU, with CTIs interconnected in
-  a star topology via the Cross Trigger Matrix (CTM), which is not programmable.
-  The ECT components are not part of the trace generation data path and are thus
-  not part of the CoreSight graph described in the general CoreSight bindings
-  file coresight.txt.
-
-  The CTI component properties define the connections between the individual
-  CTI and the components it is directly connected to, consisting of input and
-  output hardware trigger signals. CTIs can have a maximum number of input and
-  output hardware trigger signals (8 each for v1 CTI, 32 each for v2 CTI). The
-  number is defined at design time, the maximum of each defined in the DEVID
-  register.
-
-  CTIs are interconnected in a star topology via the CTM, using a number of
-  programmable channels, usually 4, but again implementation defined and
-  described in the DEVID register. The star topology is not required to be
-  described in the bindings as the actual connections are software
-  programmable.
-
-  In general the connections between CTI and components via the trigger signals
-  are implementation defined, except when the CTI is connected to an ARM v8
-  architecture core and optional ETM.
-
-  In this case the ARM v8 architecture defines the required signal connections
-  between CTI and the CPU core and ETM if present. In the case of a v8
-  architecturally connected CTI an additional compatible string is used to
-  indicate this feature (arm,coresight-cti-v8-arch).
-
-  When CTI trigger connection information is unavailable then a minimal driver
-  binding can be declared with no explicit trigger signals. This will result
-  the driver detecting the maximum available triggers and channels from the
-  DEVID register and make them all available for use as a single default
-  connection. Any user / client application will require additional information
-  on the connections between the CTI and other components for correct operation.
-  This information might be found by enabling the Integration Test registers in
-  the driver (set CONFIG_CORESIGHT_CTI_INTEGRATION_TEST in Kernel
-  configuration). These registers may be used to explore the trigger connections
-  between CTI and other CoreSight components.
-
-  Certain triggers between CoreSight devices and the CTI have specific types
-  and usages. These can be defined along with the signal indexes with the
-  constants defined in <dt-bindings/arm/coresight-cti-dt.h>
-
-  For example a CTI connected to a core will usually have a DBGREQ signal. This
-  is defined in the binding as type PE_EDBGREQ. These types will appear in an
-  optional array alongside the signal indexes. Omitting types will default all
-  signals to GEN_IO.
-
-  Note that some hardware trigger signals can be connected to non-CoreSight
-  components (e.g. UART etc) depending on hardware implementation.
-
-maintainers:
-  - Mike Leach <mike.leach@linaro.org>
-
-allOf:
-  - $ref: /schemas/arm/primecell.yaml#
-
-# Need a custom select here or 'arm,primecell' will match on lots of nodes
-select:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - arm,coresight-cti
-  required:
-    - compatible
-
-properties:
-  $nodename:
-    pattern: "^cti(@[0-9a-f]+)$"
-  compatible:
-    oneOf:
-      - items:
-          - const: arm,coresight-cti
-          - const: arm,primecell
-      - items:
-          - const: arm,coresight-cti-v8-arch
-          - const: arm,coresight-cti
-          - const: arm,primecell
-
-  reg:
-    maxItems: 1
-
-  cpu:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description:
-      Handle to cpu this device is associated with. This must appear in the
-      base cti node if compatible string arm,coresight-cti-v8-arch is used,
-      or may appear in a trig-conns child node when appropriate.
-
-  arm,cti-ctm-id:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      Defines the CTM this CTI is connected to, in large systems with multiple
-      separate CTI/CTM nets. Typically multi-socket systems where the CTM is
-      propagated between sockets.
-
-  arm,cs-dev-assoc:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description:
-      defines a phandle reference to an associated CoreSight trace device.
-      When the associated trace device is enabled, then the respective CTI
-      will be enabled. Use in a trig-conns node, or in CTI base node when
-      compatible string arm,coresight-cti-v8-arch used. If the associated
-      device has not been registered then the node name will be stored as
-      the connection name for later resolution. If the associated device is
-      not a CoreSight device or not registered then the node name will remain
-      the connection name and automatic enabling will not occur.
-
-  # size cells and address cells required if trig-conns node present.
-  "#size-cells":
-    const: 0
-
-  "#address-cells":
-    const: 1
-
-patternProperties:
-  '^trig-conns@([0-9]+)$':
-    type: object
-    description:
-      A trigger connections child node which describes the trigger signals
-      between this CTI and another hardware device. This device may be a CPU,
-      CoreSight device, any other hardware device or simple external IO lines.
-      The connection may have both input and output triggers, or only one or the
-      other.
-
-    properties:
-      reg:
-        maxItems: 1
-
-      arm,trig-in-sigs:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 1
-        maxItems: 32
-        description:
-          List of CTI trigger in signal numbers in use by a trig-conns node.
-
-      arm,trig-in-types:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 1
-        maxItems: 32
-        description:
-          List of constants representing the types for the CTI trigger in
-          signals. Types in this array match to the corresponding signal in the
-          arm,trig-in-sigs array. If the -types array is smaller, or omitted
-          completely, then the types will default to GEN_IO.
-
-      arm,trig-out-sigs:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 1
-        maxItems: 32
-        description:
-          List of CTI trigger out signal numbers in use by a trig-conns node.
-
-      arm,trig-out-types:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 1
-        maxItems: 32
-        description:
-          List of constants representing the types for the CTI trigger out
-          signals. Types in this array match to the corresponding signal
-          in the arm,trig-out-sigs array. If the "-types" array is smaller,
-          or omitted completely, then the types will default to GEN_IO.
-
-      arm,trig-filters:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 1
-        maxItems: 32
-        description:
-          List of CTI trigger out signals that will be blocked from becoming
-          active, unless filtering is disabled on the driver.
-
-      arm,trig-conn-name:
-        $ref: /schemas/types.yaml#/definitions/string
-        description:
-          Defines a connection name that will be displayed, if the cpu or
-          arm,cs-dev-assoc properties are not being used in this connection.
-          Principle use for CTI that are connected to non-CoreSight devices, or
-          external IO.
-
-    anyOf:
-      - required:
-          - arm,trig-in-sigs
-      - required:
-          - arm,trig-out-sigs
-    oneOf:
-      - required:
-          - arm,trig-conn-name
-      - required:
-          - cpu
-      - required:
-          - arm,cs-dev-assoc
-    required:
-      - reg
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-
-if:
-  properties:
-    compatible:
-      contains:
-        const: arm,coresight-cti-v8-arch
-
-then:
-  required:
-    - cpu
-
-unevaluatedProperties: false
-
-examples:
-  # minimum CTI definition. DEVID register used to set number of triggers.
-  - |
-    cti@20020000 {
-      compatible = "arm,coresight-cti", "arm,primecell";
-      reg = <0x20020000 0x1000>;
-
-      clocks = <&soc_smc50mhz>;
-      clock-names = "apb_pclk";
-    };
-  #  v8 architecturally defined CTI - CPU + ETM connections generated by the
-  #  driver according to the v8 architecture specification.
-  - |
-    cti@859000 {
-      compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
-                   "arm,primecell";
-      reg = <0x859000 0x1000>;
-
-      clocks = <&soc_smc50mhz>;
-      clock-names = "apb_pclk";
-
-      cpu = <&CPU1>;
-      arm,cs-dev-assoc = <&etm1>;
-    };
-  # Implementation defined CTI - CPU + ETM connections explicitly defined..
-  # Shows use of type constants from dt-bindings/arm/coresight-cti-dt.h
-  # #size-cells and #address-cells are required if trig-conns@ nodes present.
-  - |
-    #include <dt-bindings/arm/coresight-cti-dt.h>
-
-    cti@858000 {
-      compatible = "arm,coresight-cti", "arm,primecell";
-      reg = <0x858000 0x1000>;
-
-      clocks = <&soc_smc50mhz>;
-      clock-names = "apb_pclk";
-
-      arm,cti-ctm-id = <1>;
-
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      trig-conns@0 {
-            reg = <0>;
-            arm,trig-in-sigs = <4 5 6 7>;
-            arm,trig-in-types = <ETM_EXTOUT
-                                 ETM_EXTOUT
-                                 ETM_EXTOUT
-                                 ETM_EXTOUT>;
-            arm,trig-out-sigs = <4 5 6 7>;
-            arm,trig-out-types = <ETM_EXTIN
-                                  ETM_EXTIN
-                                  ETM_EXTIN
-                                  ETM_EXTIN>;
-            arm,cs-dev-assoc = <&etm0>;
-      };
-
-      trig-conns@1 {
-            reg = <1>;
-            cpu = <&CPU0>;
-            arm,trig-in-sigs = <0 1>;
-            arm,trig-in-types = <PE_DBGTRIGGER
-                                 PE_PMUIRQ>;
-            arm,trig-out-sigs=<0 1 2 >;
-            arm,trig-out-types = <PE_EDBGREQ
-                                  PE_DBGRESTART
-                                  PE_CTIIRQ>;
-
-            arm,trig-filters = <0>;
-      };
-    };
-  # Implementation defined CTI - non CoreSight component connections.
-  - |
-    cti@20110000 {
-      compatible = "arm,coresight-cti", "arm,primecell";
-      reg = <0x20110000 0x1000>;
-
-      clocks = <&soc_smc50mhz>;
-      clock-names = "apb_pclk";
-
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      trig-conns@0 {
-        reg = <0>;
-        arm,trig-in-sigs=<0>;
-        arm,trig-in-types=<GEN_INTREQ>;
-        arm,trig-out-sigs=<0>;
-        arm,trig-out-types=<GEN_HALTREQ>;
-        arm,trig-conn-name = "sys_profiler";
-      };
-
-      trig-conns@1 {
-        reg = <1>;
-        arm,trig-out-sigs=<2 3>;
-        arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
-        arm,trig-conn-name = "watchdog";
-      };
-
-      trig-conns@2 {
-        reg = <2>;
-        arm,trig-in-sigs=<1 6>;
-        arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
-        arm,trig-conn-name = "g_counter";
-      };
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
deleted file mode 100644
index 7f9c1ca87487..000000000000
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ /dev/null
@@ -1,397 +0,0 @@
-* CoreSight Components:
-
-CoreSight components are compliant with the ARM CoreSight architecture
-specification and can be connected in various topologies to suit a particular
-SoCs tracing needs. These trace components can generally be classified as
-sinks, links and sources. Trace data produced by one or more sources flows
-through the intermediate links connecting the source to the currently selected
-sink. Each CoreSight component device should use these properties to describe
-its hardware characteristcs.
-
-* Required properties for all components *except* non-configurable replicators
-  and non-configurable funnels:
-
-	* compatible: These have to be supplemented with "arm,primecell" as
-	  drivers are using the AMBA bus interface.  Possible values include:
-		- Embedded Trace Buffer (version 1.0):
-			"arm,coresight-etb10", "arm,primecell";
-
-		- Trace Port Interface Unit:
-			"arm,coresight-tpiu", "arm,primecell";
-
-		- Trace Memory Controller, used for Embedded Trace Buffer(ETB),
-		  Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR)
-		  configuration.  The configuration mode (ETB, ETF, ETR) is
-		  discovered at boot time when the device is probed.
-			"arm,coresight-tmc", "arm,primecell";
-
-		- Trace Programmable Funnel:
-			"arm,coresight-dynamic-funnel", "arm,primecell";
-			"arm,coresight-funnel", "arm,primecell"; (OBSOLETE. For
-				backward compatibility and will be removed)
-
-		- Embedded Trace Macrocell (version 3.x) and
-					Program Flow Trace Macrocell:
-			"arm,coresight-etm3x", "arm,primecell";
-
-		- Embedded Trace Macrocell (version 4.x), with memory mapped access.
-			"arm,coresight-etm4x", "arm,primecell";
-
-		- Embedded Trace Macrocell (version 4.x), with system register access only.
-			"arm,coresight-etm4x-sysreg";
-
-		- Coresight programmable Replicator :
-			"arm,coresight-dynamic-replicator", "arm,primecell";
-
-		- System Trace Macrocell:
-			"arm,coresight-stm", "arm,primecell"; [1]
-		- Coresight Address Translation Unit (CATU)
-			"arm,coresight-catu", "arm,primecell";
-
-		- Coresight Cross Trigger Interface (CTI):
-			"arm,coresight-cti", "arm,primecell";
-			See coresight-cti.yaml for full CTI definitions.
-
-	* reg: physical base address and length of the register
-	  set(s) of the component.
-
-	* clocks: the clocks associated to this component.
-
-	* clock-names: the name of the clocks referenced by the code.
-	  Since we are using the AMBA framework, the name of the clock
-	  providing the interconnect should be "apb_pclk", and some
-	  coresight blocks also have an additional clock "atclk", which
-	  clocks the core of that coresight component. The latter clock
-	  is optional.
-
-	* port or ports: see "Graph bindings for Coresight" below.
-
-* Additional required property for Embedded Trace Macrocell (version 3.x and
-  version 4.x):
-	* cpu: the cpu phandle this ETM/PTM is affined to. Do not
-	  assume it to default to CPU0 if omitted.
-
-* Additional required properties for System Trace Macrocells (STM):
-	* reg: along with the physical base address and length of the register
-	  set as described above, another entry is required to describe the
-	  mapping of the extended stimulus port area.
-
-	* reg-names: the only acceptable values are "stm-base" and
-	  "stm-stimulus-base", each corresponding to the areas defined in "reg".
-
-* Required properties for Coresight Cross Trigger Interface (CTI)
-	See coresight-cti.yaml for full CTI definitions.
-
-* Required properties for devices that don't show up on the AMBA bus, such as
-  non-configurable replicators and non-configurable funnels:
-
-	* compatible: Currently supported value is (note the absence of the
-	  AMBA markee):
-		- Coresight Non-configurable Replicator:
-			"arm,coresight-static-replicator";
-			"arm,coresight-replicator"; (OBSOLETE. For backward
-				compatibility and will be removed)
-
-		- Coresight Non-configurable Funnel:
-			"arm,coresight-static-funnel";
-
-	* port or ports: see "Graph bindings for Coresight" below.
-
-* Optional properties for all components:
-
-	* arm,coresight-loses-context-with-cpu : boolean. Indicates that the
-	  hardware will lose register context on CPU power down (e.g. CPUIdle).
-	  An example of where this may be needed are systems which contain a
-	  coresight component and CPU in the same power domain. When the CPU
-	  powers down the coresight component also powers down and loses its
-	  context. This property is currently only used for the ETM 4.x driver.
-
-* Optional properties for ETM/PTMs:
-
-	* arm,cp14: must be present if the system accesses ETM/PTM management
-	  registers via co-processor 14.
-
-	* qcom,skip-power-up: boolean. Indicates that an implementation can
-	  skip powering up the trace unit. TRCPDCR.PU does not have to be set
-	  on Qualcomm Technologies Inc. systems since ETMs are in the same power
-	  domain as their CPU cores. This property is required to identify such
-	  systems with hardware errata where the CPU watchdog counter is stopped
-	  when TRCPDCR.PU is set.
-
-* Optional property for TMC:
-
-	* arm,buffer-size: size of contiguous buffer space for TMC ETR
-	  (embedded trace router). This property is obsolete. The buffer size
-	  can be configured dynamically via buffer_size property in sysfs.
-
-	* arm,scatter-gather: boolean. Indicates that the TMC-ETR can safely
-	  use the SG mode on this system.
-
-* Optional property for CATU :
-	* interrupts : Exactly one SPI may be listed for reporting the address
-	  error
-
-* Optional property for configurable replicators:
-
-	* qcom,replicator-loses-context: boolean. Indicates that the replicator
-	  will lose register context when AMBA clock is removed which is observed
-	  in some replicator designs.
-
-Graph bindings for Coresight
--------------------------------
-
-Coresight components are interconnected to create a data path for the flow of
-trace data generated from the "sources" to their collection points "sink".
-Each coresight component must describe the "input" and "output" connections.
-The connections must be described via generic DT graph bindings as described
-by the "bindings/graph.txt", where each "port" along with an "endpoint"
-component represents a hardware port and the connection.
-
- * All output ports must be listed inside a child node named "out-ports"
- * All input ports must be listed inside a child node named "in-ports".
- * Port address must match the hardware port number.
-
-Example:
-
-1. Sinks
-	etb@20010000 {
-		compatible = "arm,coresight-etb10", "arm,primecell";
-		reg = <0 0x20010000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				etb_in_port: endpoint@0 {
-					remote-endpoint = <&replicator_out_port0>;
-				};
-			};
-		};
-	};
-
-	tpiu@20030000 {
-		compatible = "arm,coresight-tpiu", "arm,primecell";
-		reg = <0 0x20030000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				tpiu_in_port: endpoint@0 {
-					remote-endpoint = <&replicator_out_port1>;
-				};
-			};
-		};
-	};
-
-	etr@20070000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0 0x20070000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		in-ports {
-			port {
-				etr_in_port: endpoint {
-					remote-endpoint = <&replicator2_out_port0>;
-				};
-			};
-		};
-
-		out-ports {
-			port {
-				etr_out_port: endpoint {
-					remote-endpoint = <&catu_in_port>;
-				};
-			};
-		};
-	};
-
-2. Links
-	replicator {
-		/* non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell".
-		 */
-		compatible = "arm,coresight-static-replicator";
-
-		out-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* replicator output ports */
-			port@0 {
-				reg = <0>;
-				replicator_out_port0: endpoint {
-					remote-endpoint = <&etb_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				replicator_out_port1: endpoint {
-					remote-endpoint = <&tpiu_in_port>;
-				};
-			};
-		};
-
-		in-ports {
-			port {
-				replicator_in_port0: endpoint {
-					remote-endpoint = <&funnel_out_port0>;
-				};
-			};
-		};
-	};
-
-	funnel {
-		/*
-		 * non-configurable funnel don't show up on the AMBA
-		 * bus.  As such no need to add "arm,primecell".
-		 */
-		compatible = "arm,coresight-static-funnel";
-		clocks = <&crg_ctrl HI3660_PCLK>;
-		clock-names = "apb_pclk";
-
-		out-ports {
-			port {
-				combo_funnel_out: endpoint {
-					remote-endpoint = <&top_funnel_in>;
-				};
-			};
-		};
-
-		in-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				combo_funnel_in0: endpoint {
-					remote-endpoint = <&cluster0_etf_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				combo_funnel_in1: endpoint {
-					remote-endpoint = <&cluster1_etf_out>;
-				};
-			};
-		};
-	};
-
-	funnel@20040000 {
-		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-		reg = <0 0x20040000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				funnel_out_port0: endpoint {
-					remote-endpoint =
-							<&replicator_in_port0>;
-				};
-			};
-		};
-
-		in-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				funnel_in_port0: endpoint {
-					remote-endpoint = <&ptm0_out_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				funnel_in_port1: endpoint {
-					remote-endpoint = <&ptm1_out_port>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-				funnel_in_port2: endpoint {
-					remote-endpoint = <&etm0_out_port>;
-				};
-			};
-
-		};
-	};
-
-3. Sources
-	ptm@2201c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2201c000 0 0x1000>;
-
-		cpu = <&cpu0>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				ptm0_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port0>;
-				};
-			};
-		};
-	};
-
-	ptm@2201d000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0 0x2201d000 0 0x1000>;
-
-		cpu = <&cpu1>;
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				ptm1_out_port: endpoint {
-					remote-endpoint = <&funnel_in_port1>;
-				};
-			};
-		};
-	};
-
-4. STM
-	stm@20100000 {
-		compatible = "arm,coresight-stm", "arm,primecell";
-		reg = <0 0x20100000 0 0x1000>,
-		      <0 0x28000000 0 0x180000>;
-		reg-names = "stm-base", "stm-stimulus-base";
-
-		clocks = <&soc_smc50mhz>;
-		clock-names = "apb_pclk";
-		out-ports {
-			port {
-				stm_out_port: endpoint {
-					remote-endpoint = <&main_funnel_in_port2>;
-				};
-			};
-		};
-	};
-
-5. CATU
-
-	catu@207e0000 {
-		compatible = "arm,coresight-catu", "arm,primecell";
-		reg = <0 0x207e0000 0 0x1000>;
-
-		clocks = <&oscclk6a>;
-		clock-names = "apb_pclk";
-
-		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-		in-ports {
-			port {
-				catu_in_port: endpoint {
-					remote-endpoint = <&etr_out_port>;
-				};
-			};
-		};
-	};
-
-[1]. There is currently two version of STM: STM32 and STM500.  Both
-have the same HW interface and as such don't need an explicit binding name.
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 9a2432a88074..ff272e517d57 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/cpus.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM CPUs bindings
+title: ARM CPUs
 
 maintainers:
   - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
@@ -85,6 +85,8 @@ properties:
 
   compatible:
     enum:
+      - apple,avalanche
+      - apple,blizzard
       - apple,icestorm
       - apple,firestorm
       - arm,arm710t
@@ -137,6 +139,12 @@ properties:
       - arm,cortex-a75
       - arm,cortex-a76
       - arm,cortex-a77
+      - arm,cortex-a78
+      - arm,cortex-a78ae
+      - arm,cortex-a78c
+      - arm,cortex-a510
+      - arm,cortex-a710
+      - arm,cortex-a715
       - arm,cortex-m0
       - arm,cortex-m0+
       - arm,cortex-m1
@@ -145,8 +153,14 @@ properties:
       - arm,cortex-r4
       - arm,cortex-r5
       - arm,cortex-r7
+      - arm,cortex-x1
+      - arm,cortex-x1c
+      - arm,cortex-x2
+      - arm,cortex-x3
       - arm,neoverse-e1
       - arm,neoverse-n1
+      - arm,neoverse-n2
+      - arm,neoverse-v1
       - brcm,brahma-b15
       - brcm,brahma-b53
       - brcm,vulcan
@@ -166,12 +180,19 @@ properties:
       - nvidia,tegra194-carmel
       - qcom,krait
       - qcom,kryo
+      - qcom,kryo240
+      - qcom,kryo250
       - qcom,kryo260
       - qcom,kryo280
+      - qcom,kryo360
       - qcom,kryo385
       - qcom,kryo468
       - qcom,kryo485
+      - qcom,kryo560
+      - qcom,kryo570
+      - qcom,kryo660
       - qcom,kryo685
+      - qcom,kryo780
       - qcom,scorpion
 
   enable-method:
@@ -209,6 +230,10 @@ properties:
           - qcom,gcc-msm8660
           - qcom,kpss-acc-v1
           - qcom,kpss-acc-v2
+          - qcom,msm8226-smp
+          - qcom,msm8909-smp
+          # Only valid on ARM 32-bit, see above for ARM v8 64-bit
+          - qcom,msm8916-smp
           - renesas,apmu
           - renesas,r9a06g032-smp
           - rockchip,rk3036-smp
@@ -219,27 +244,31 @@ properties:
           - ti,am4372
 
   cpu-release-addr:
-    $ref: '/schemas/types.yaml#/definitions/uint64'
-
+    oneOf:
+      - $ref: '/schemas/types.yaml#/definitions/uint32'
+      - $ref: '/schemas/types.yaml#/definitions/uint64'
     description:
+      The DT specification defines this as 64-bit always, but some 32-bit Arm
+      systems have used a 32-bit value which must be supported.
       Required for systems that have an "enable-method"
         property value of "spin-table".
-      On ARM v8 64-bit systems must be a two cell
-        property identifying a 64-bit zero-initialised
-        memory location.
 
   cpu-idle-states:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    items:
+      maxItems: 1
     description: |
       List of phandles to idle state nodes supported
       by this cpu (see ./idle-states.yaml).
 
   capacity-dmips-mhz:
     description:
-      u32 value representing CPU capacity (see ./cpu-capacity.txt) in
+      u32 value representing CPU capacity (see ../cpu/cpu-capacity.txt) in
       DMIPS/MHz, relative to highest capacity-dmips-mhz
       in the system.
 
+  cci-control-port: true
+
   dynamic-power-coefficient:
     $ref: '/schemas/types.yaml#/definitions/uint32'
     description:
@@ -293,7 +322,8 @@ properties:
       Specifies the ACC* node associated with this CPU.
 
       Required for systems that have an "enable-method" property
-      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
+      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2", "qcom,msm8226-smp" or
+      "qcom,msm8916-smp".
 
       * arm/msm/qcom,kpss-acc.txt
 
diff --git a/Documentation/devicetree/bindings/arm/digicolor.yaml b/Documentation/devicetree/bindings/arm/digicolor.yaml
index a35de3c9e284..0cf9ddaa527e 100644
--- a/Documentation/devicetree/bindings/arm/digicolor.yaml
+++ b/Documentation/devicetree/bindings/arm/digicolor.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/digicolor.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Conexant Digicolor Platforms Device Tree Bindings
+title: Conexant Digicolor Platforms
 
 maintainers:
   - Baruch Siach <baruch@tkos.co.il>
diff --git a/Documentation/devicetree/bindings/arm/ete.yaml b/Documentation/devicetree/bindings/arm/ete.yaml
deleted file mode 100644
index 7f9b2d1e1147..000000000000
--- a/Documentation/devicetree/bindings/arm/ete.yaml
+++ /dev/null
@@ -1,75 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-# Copyright 2021, Arm Ltd
-%YAML 1.2
----
-$id: "http://devicetree.org/schemas/arm/ete.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
-
-title: ARM Embedded Trace Extensions
-
-maintainers:
-  - Suzuki K Poulose <suzuki.poulose@arm.com>
-  - Mathieu Poirier <mathieu.poirier@linaro.org>
-
-description: |
-  Arm Embedded Trace Extension(ETE) is a per CPU trace component that
-  allows tracing the CPU execution. It overlaps with the CoreSight ETMv4
-  architecture and has extended support for future architecture changes.
-  The trace generated by the ETE could be stored via legacy CoreSight
-  components (e.g, TMC-ETR) or other means (e.g, using a per CPU buffer
-  Arm Trace Buffer Extension (TRBE)). Since the ETE can be connected to
-  legacy CoreSight components, a node must be listed per instance, along
-  with any optional connection graph as per the coresight bindings.
-  See bindings/arm/coresight.txt.
-
-properties:
-  $nodename:
-    pattern: "^ete([0-9a-f]+)$"
-  compatible:
-    items:
-      - const: arm,embedded-trace-extension
-
-  cpu:
-    description: |
-      Handle to the cpu this ETE is bound to.
-    $ref: /schemas/types.yaml#/definitions/phandle
-
-  out-ports:
-    description: |
-      Output connections from the ETE to legacy CoreSight trace bus.
-    $ref: /schemas/graph.yaml#/properties/ports
-    properties:
-      port:
-        description: Output connection from the ETE to legacy CoreSight Trace bus.
-        $ref: /schemas/graph.yaml#/properties/port
-
-required:
-  - compatible
-  - cpu
-
-additionalProperties: false
-
-examples:
-
-# An ETE node without legacy CoreSight connections
-  - |
-    ete0 {
-      compatible = "arm,embedded-trace-extension";
-      cpu = <&cpu_0>;
-    };
-# An ETE node with legacy CoreSight connections
-  - |
-   ete1 {
-      compatible = "arm,embedded-trace-extension";
-      cpu = <&cpu_1>;
-
-      out-ports {        /* legacy coresight connection */
-         port {
-             ete1_out_port: endpoint {
-                remote-endpoint = <&funnel_in_port0>;
-             };
-         };
-      };
-   };
-
-...
diff --git a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml
index c24047c1fdd5..5d033570b57b 100644
--- a/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml
+++ b/Documentation/devicetree/bindings/arm/firmware/linaro,optee-tz.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/firmware/linaro,optee-tz.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OP-TEE Device Tree Bindings
+title: OP-TEE
 
 maintainers:
   - Jens Wiklander <jens.wiklander@linaro.org>
@@ -24,6 +24,13 @@ properties:
   compatible:
     const: linaro,optee-tz
 
+  interrupts:
+    maxItems: 1
+    description: |
+      This interrupt which is used to signal an event by the secure world
+      software is expected to be either a per-cpu interrupt or an
+      edge-triggered peripheral interrupt.
+
   method:
     enum: [smc, hvc]
     description: |
@@ -42,10 +49,12 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
     firmware  {
         optee  {
             compatible = "linaro,optee-tz";
             method = "smc";
+            interrupts = <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>;
         };
     };
 
diff --git a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt
deleted file mode 100644
index 780d0392a66b..000000000000
--- a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Trusted Foundations
--------------------
-
-Boards that use the Trusted Foundations secure monitor can signal its
-presence by declaring a node compatible with "tlm,trusted-foundations"
-under the /firmware/ node
-
-Required properties:
-- compatible: "tlm,trusted-foundations"
-- tlm,version-major: major version number of Trusted Foundations firmware
-- tlm,version-minor: minor version number of Trusted Foundations firmware
-
-Example:
-	firmware {
-		trusted-foundations {
-			compatible = "tlm,trusted-foundations";
-			tlm,version-major = <2>;
-			tlm,version-minor = <8>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml
new file mode 100644
index 000000000000..9d1857c0aa07
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/firmware/tlm,trusted-foundations.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/firmware/tlm,trusted-foundations.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Trusted Foundations
+
+description: |
+  Boards that use the Trusted Foundations secure monitor can signal its
+  presence by declaring a node compatible under the /firmware/ node
+
+maintainers:
+  - Stephen Warren <swarren@nvidia.com>
+
+properties:
+  $nodename:
+    const: trusted-foundations
+
+  compatible:
+    const: tlm,trusted-foundations
+
+  tlm,version-major:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: major version number of Trusted Foundations firmware
+
+  tlm,version-minor:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: minor version number of Trusted Foundations firmware
+
+required:
+  - compatible
+  - tlm,version-major
+  - tlm,version-minor
+
+additionalProperties: false
+
+examples:
+  - |
+    firmware {
+      trusted-foundations {
+        compatible = "tlm,trusted-foundations";
+        tlm,version-major = <2>;
+        tlm,version-minor = <8>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
deleted file mode 100644
index b5cb374dc47d..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-dcfg.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Freescale DCFG
-
-DCFG is the device configuration unit, that provides general purpose
-configuration and status for the device. Such as setting the secondary
-core start address and release the secondary core from holdoff and startup.
-
-Required properties:
-  - compatible: Should contain a chip-specific compatible string,
-	Chip-specific strings are of the form "fsl,<chip>-dcfg",
-	The following <chip>s are known to be supported:
-	ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
-
-  - reg : should contain base address and length of DCFG memory-mapped registers
-
-Example:
-	dcfg: dcfg@1ee0000 {
-		compatible = "fsl,ls1021a-dcfg";
-		reg = <0x0 0x1ee0000 0x0 0x10000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt
deleted file mode 100644
index 0ab67b0b216d..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Freescale SCFG
-
-SCFG is the supplemental configuration unit, that provides SoC specific
-configuration and status registers for the chip. Such as getting PEX port
-status.
-
-Required properties:
-  - compatible: Should contain a chip-specific compatible string,
-	Chip-specific strings are of the form "fsl,<chip>-scfg",
-	The following <chip>s are known to be supported:
-	ls1012a, ls1021a, ls1043a, ls1046a, ls2080a.
-
-  - reg: should contain base address and length of SCFG memory-mapped registers
-
-Example:
-	scfg: scfg@1570000 {
-		compatible = "fsl,ls1021a-scfg";
-		reg = <0x0 0x1570000 0x0 0x10000>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
deleted file mode 100644
index fd0061712443..000000000000
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ /dev/null
@@ -1,270 +0,0 @@
-NXP i.MX System Controller Firmware (SCFW)
---------------------------------------------------------------------
-
-The System Controller Firmware (SCFW) is a low-level system function
-which runs on a dedicated Cortex-M core to provide power, clock, and
-resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
-(QM, QP), and i.MX8QX (QXP, DX).
-
-The AP communicates with the SC using a multi-ported MU module found
-in the LSIO subsystem. The current definition of this MU module provides
-5 remote AP connections to the SC to support up to 5 execution environments
-(TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
-with the LSIO DSC IP bus. The SC firmware will communicate with this MU
-using the MSI bus.
-
-System Controller Device Node:
-============================================================
-
-The scu node with the following properties shall be under the /firmware/ node.
-
-Required properties:
--------------------
-- compatible:	should be "fsl,imx-scu".
-- mbox-names:	should include "tx0", "tx1", "tx2", "tx3",
-			       "rx0", "rx1", "rx2", "rx3";
-		include "gip3" if want to support general MU interrupt.
-- mboxes:	List of phandle of 4 MU channels for tx, 4 MU channels for
-		rx, and 1 optional MU channel for general interrupt.
-		All MU channels must be in the same MU instance.
-		Cross instances are not allowed. The MU instance can only
-		be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need
-		to make sure use the one which is not conflict with other
-		execution environments. e.g. ATF.
-		Note:
-		Channel 0 must be "tx0" or "rx0".
-		Channel 1 must be "tx1" or "rx1".
-		Channel 2 must be "tx2" or "rx2".
-		Channel 3 must be "tx3" or "rx3".
-		General interrupt rx channel must be "gip3".
-		e.g.
-		mboxes = <&lsio_mu1 0 0
-			  &lsio_mu1 0 1
-			  &lsio_mu1 0 2
-			  &lsio_mu1 0 3
-			  &lsio_mu1 1 0
-			  &lsio_mu1 1 1
-			  &lsio_mu1 1 2
-			  &lsio_mu1 1 3
-			  &lsio_mu1 3 3>;
-		See Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
-		for detailed mailbox binding.
-
-Note: Each mu which supports general interrupt should have an alias correctly
-numbered in "aliases" node.
-e.g.
-aliases {
-	mu1 = &lsio_mu1;
-};
-
-i.MX SCU Client Device Node:
-============================================================
-
-Client nodes are maintained as children of the relevant IMX-SCU device node.
-
-Power domain bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding for the SCU power domain providers uses the generic power
-domain binding[2].
-
-Required properties:
-- compatible:		Should be one of:
-			  "fsl,imx8qm-scu-pd",
-			  "fsl,imx8qxp-scu-pd"
-			followed by "fsl,scu-pd"
-
-- #power-domain-cells:	Must be 1. Contains the Resource ID used by
-			SCU commands.
-			See detailed Resource ID list from:
-			include/dt-bindings/firmware/imx/rsrc.h
-
-Clock bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding uses the common clock binding[1].
-
-Required properties:
-- compatible:		Should be one of:
-			  "fsl,imx8qm-clk"
-			  "fsl,imx8qxp-clk"
-			followed by "fsl,scu-clk"
-- #clock-cells:		Should be 2.
-			Contains the Resource and Clock ID value.
-- clocks:		List of clock specifiers, must contain an entry for
-			each required entry in clock-names
-- clock-names:		Should include entries "xtal_32KHz", "xtal_24MHz"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.
-
-See the full list of clock IDs from:
-include/dt-bindings/clock/imx8qxp-clock.h
-
-Pinctrl bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-This binding uses the i.MX common pinctrl binding[3].
-
-Required properties:
-- compatible:		Should be one of:
-			"fsl,imx8qm-iomuxc",
-			"fsl,imx8qxp-iomuxc",
-			"fsl,imx8dxl-iomuxc".
-
-Required properties for Pinctrl sub nodes:
-- fsl,pins:		Each entry consists of 3 integers which represents
-			the mux and config setting for one pin. The first 2
-			integers <pin_id mux_mode> are specified using a
-			PIN_FUNC_ID macro, which can be found in
-			<dt-bindings/pinctrl/pads-imx8qm.h>,
-			<dt-bindings/pinctrl/pads-imx8qxp.h>,
-			<dt-bindings/pinctrl/pads-imx8dxl.h>.
-			The last integer CONFIG is the pad setting value like
-			pull-up on this pin.
-
-			Please refer to i.MX8QXP Reference Manual for detailed
-			CONFIG settings.
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/power/power-domain.yaml
-[3] Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
-
-RTC bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: should be "fsl,imx8qxp-sc-rtc";
-
-OCOTP bindings based on SCU Message Protocol
-------------------------------------------------------------
-Required properties:
-- compatible:		Should be one of:
-			"fsl,imx8qm-scu-ocotp",
-			"fsl,imx8qxp-scu-ocotp".
-- #address-cells:	Must be 1. Contains byte index
-- #size-cells:		Must be 1. Contains byte length
-
-Optional Child nodes:
-
-- Data cells of ocotp:
-  Detailed bindings are described in bindings/nvmem/nvmem.txt
-
-Watchdog bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: should be:
-              "fsl,imx8qxp-sc-wdt"
-              followed by "fsl,imx-sc-wdt";
-Optional properties:
-- timeout-sec: contains the watchdog timeout in seconds.
-
-SCU key bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible: should be:
-              "fsl,imx8qxp-sc-key"
-              followed by "fsl,imx-sc-key";
-- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml
-
-Thermal bindings based on SCU Message Protocol
-------------------------------------------------------------
-
-Required properties:
-- compatible:			Should be :
-				  "fsl,imx8qxp-sc-thermal"
-				followed by "fsl,imx-sc-thermal";
-
-- #thermal-sensor-cells:	See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
-				for a description.
-
-Example (imx8qxp):
--------------
-aliases {
-	mu1 = &lsio_mu1;
-};
-
-lsio_mu1: mailbox@5d1c0000 {
-	...
-	#mbox-cells = <2>;
-};
-
-firmware {
-	scu {
-		compatible = "fsl,imx-scu";
-		mbox-names = "tx0", "tx1", "tx2", "tx3",
-			     "rx0", "rx1", "rx2", "rx3",
-			     "gip3";
-		mboxes = <&lsio_mu1 0 0
-			  &lsio_mu1 0 1
-			  &lsio_mu1 0 2
-			  &lsio_mu1 0 3
-			  &lsio_mu1 1 0
-			  &lsio_mu1 1 1
-			  &lsio_mu1 1 2
-			  &lsio_mu1 1 3
-			  &lsio_mu1 3 3>;
-
-		clk: clk {
-			compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
-			#clock-cells = <2>;
-		};
-
-		iomuxc {
-			compatible = "fsl,imx8qxp-iomuxc";
-
-			pinctrl_lpuart0: lpuart0grp {
-				fsl,pins = <
-					SC_P_UART0_RX_ADMA_UART0_RX	0x06000020
-					SC_P_UART0_TX_ADMA_UART0_TX	0x06000020
-				>;
-			};
-			...
-		};
-
-		ocotp: imx8qx-ocotp {
-			compatible = "fsl,imx8qxp-scu-ocotp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			fec_mac0: mac@2c4 {
-				reg = <0x2c4 8>;
-			};
-		};
-
-		pd: imx8qx-pd {
-			compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
-			#power-domain-cells = <1>;
-		};
-
-		rtc: rtc {
-			compatible = "fsl,imx8qxp-sc-rtc";
-		};
-
-		scu_key: scu-key {
-			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
-			linux,keycodes = <KEY_POWER>;
-		};
-
-		watchdog {
-			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
-			timeout-sec = <60>;
-		};
-
-		tsens: thermal-sensor {
-			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
-			#thermal-sensor-cells = <1>;
-		};
-	};
-};
-
-serial@5a060000 {
-	...
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lpuart0>;
-	clocks = <&uart0_clk IMX_SC_R_UART_0 IMX_SC_PM_CLK_PER>;
-	clock-names = "ipg";
-	power-domains = <&pd IMX_SC_R_UART_0>;
-};
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 60f4862ba15e..15d411084065 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/fsl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale i.MX Platforms Device Tree Bindings
+title: Freescale i.MX Platforms
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
@@ -88,12 +88,56 @@ properties:
         items:
           - enum:
               - armadeus,imx28-apf28      # APF28 SoM
-              - armadeus,imx28-apf28dev   # APF28 SoM on APF28Dev board
+              - bluegiga,apx4devkit       # Bluegiga APx4 SoM on dev board
+              - crystalfontz,cfa10036     # Crystalfontz CFA-10036 SoM
+              - eukrea,mbmx28lc
               - fsl,imx28-evk
               - i2se,duckbill
               - i2se,duckbill-2
+              - karo,tx28                 # Ka-Ro electronics TX28 module
+              - lwn,imx28-xea
+              - msr,m28cu3                # M28 SoM with custom base board
+              - schulercontrol,imx28-sps1
               - technologic,imx28-ts4600
           - const: fsl,imx28
+
+      - description: i.MX28 Aries M28 SoM Board
+        items:
+          - const: aries,m28
+          - const: denx,m28
+          - const: fsl,imx28
+
+      - description: i.MX28 Aries M28EVK Board
+        items:
+          - const: aries,m28evk
+          - const: denx,m28evk
+          - const: fsl,imx28
+
+      - description: i.MX28 Armadeus Systems APF28Dev Board
+        items:
+          - const: armadeus,imx28-apf28dev
+          - const: armadeus,imx28-apf28
+          - const: fsl,imx28
+
+      - description: i.MX28 Crystalfontz CFA-10036 based Boards
+        items:
+          - enum:
+              - crystalfontz,cfa10037
+              - crystalfontz,cfa10049
+              - crystalfontz,cfa10057
+              - crystalfontz,cfa10058
+          - const: crystalfontz,cfa10036
+          - const: fsl,imx28
+
+      - description: i.MX28 Crystalfontz CFA-10037 based Boards
+        items:
+          - enum:
+              - crystalfontz,cfa10055
+              - crystalfontz,cfa10056
+          - const: crystalfontz,cfa10037
+          - const: crystalfontz,cfa10036
+          - const: fsl,imx28
+
       - description: i.MX28 Duckbill 2 based Boards
         items:
           - enum:
@@ -103,6 +147,19 @@ properties:
           - const: i2se,duckbill-2
           - const: fsl,imx28
 
+      - description: i.MX28 Eukrea Electromatique MBMX283LC Board
+        items:
+          - const: eukrea,mbmx283lc
+          - const: eukrea,mbmx28lc
+          - const: fsl,imx28
+
+      - description: i.MX28 Eukrea Electromatique MBMX287LC Board
+        items:
+          - const: eukrea,mbmx287lc
+          - const: eukrea,mbmx283lc
+          - const: eukrea,mbmx28lc
+          - const: fsl,imx28
+
       - description: i.MX31 based Boards
         items:
           - enum:
@@ -172,7 +229,8 @@ properties:
               - karo,tx53                     # Ka-Ro electronics TX53 module
               - kiebackpeter,imx53-ddc        # K+P imx53 DDC
               - kiebackpeter,imx53-hsc        # K+P imx53 HSC
-              - menlo,m53menlo
+              - menlo,m53menlo                # i.MX53 Menlo board
+              - starterkit,sk-imx53
               - voipac,imx53-dmm-668          # Voipac i.MX53 X53-DMM-668
           - const: fsl,imx53
 
@@ -192,6 +250,7 @@ properties:
         items:
           - enum:
               - auvidea,h100              # Auvidea H100
+              - bosch,imx6q-acc           # Bosch ACC i.MX6 Dual
               - boundary,imx6q-nitrogen6_max
               - boundary,imx6q-nitrogen6_som2
               - boundary,imx6q-nitrogen6x
@@ -235,11 +294,13 @@ properties:
               - technexion,imx6q-pico-pi      # TechNexion i.MX6Q Pico-Pi
               - technologic,imx6q-ts4900
               - technologic,imx6q-ts7970
-              - toradex,apalis_imx6q      # Apalis iMX6 Module
+              - toradex,apalis_imx6q      # Apalis iMX6 Modules
               - udoo,imx6q-udoo           # Udoo i.MX6 Quad Board
               - uniwest,imx6q-evi         # Uniwest Evi
               - variscite,dt6customboard
               - wand,imx6q-wandboard      # Wandboard i.MX6 Quad Board
+              - ysoft,imx6q-yapp4-crux    # i.MX6 Quad Y Soft IOTA Crux board
+              - ysoft,imx6q-yapp4-pegasus # i.MX6 Quad Y Soft IOTA Pegasus board
               - zealz,imx6q-gk802         # Zealz GK802
               - zii,imx6q-zii-rdu2        # ZII RDU2 Board
           - const: fsl,imx6q
@@ -314,19 +375,28 @@ properties:
           - const: phytec,imx6q-pfla02    # PHYTEC phyFLEX-i.MX6 Quad
           - const: fsl,imx6q
 
-      - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Module
+      - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Modules
         items:
           - enum:
-              - toradex,apalis_imx6q-ixora  # Apalis iMX6Q/D Module on Ixora Carrier Board
-              - toradex,apalis_imx6q-eval   # Apalis iMX6Q/D Module on Apalis Evaluation Board
+              - toradex,apalis_imx6q-ixora      # Apalis iMX6Q/D Module on Ixora Carrier Board
+              - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board
+              - toradex,apalis_imx6q-ixora-v1.2 # Apalis iMX6Q/D Module on Ixora V1.2 Carrier Board
+              - toradex,apalis_imx6q-eval       # Apalis iMX6Q/D Module on Apalis Evaluation Board
           - const: toradex,apalis_imx6q
           - const: fsl,imx6q
 
-      - description: i.MX6Q Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1
+      - description: TQ-Systems TQMa6Q SoM (variant A) on MBa6x
         items:
-          - const: toradex,apalis_imx6q-ixora-v1.1
-          - const: toradex,apalis_imx6q-ixora
-          - const: toradex,apalis_imx6q
+          - const: tq,imx6q-mba6x-a
+          - const: tq,mba6a               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6q-tqma6q-a
+          - const: fsl,imx6q
+
+      - description: TQ-Systems TQMa6Q SoM (variant B) on MBa6x
+        items:
+          - const: tq,imx6q-mba6x-b
+          - const: tq,mba6b               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6q-tqma6q-b
           - const: fsl,imx6q
 
       - description: i.MX6QP based Boards
@@ -340,6 +410,8 @@ properties:
               - kvg,vicutp                # Kverneland UT1P board
               - prt,prtwd3                # Protonic WD3 board
               - wand,imx6qp-wandboard     # Wandboard i.MX6 QuadPlus Board
+              - ysoft,imx6qp-yapp4-crux-plus  # i.MX6 Quad Plus Y Soft IOTA Crux+ board
+              - ysoft,imx6qp-yapp4-pegasus-plus # i.MX6 Quad Plus Y Soft IOTA Pegasus+ board
               - zii,imx6qp-zii-rdu2       # ZII RDU2+ Board
           - const: fsl,imx6qp
 
@@ -350,6 +422,13 @@ properties:
           - const: phytec,imx6qdl-pcm058  # PHYTEC phyCORE-i.MX6
           - const: fsl,imx6qp
 
+      - description: TQ-Systems TQMa6QP SoM on MBa6x
+        items:
+          - const: tq,imx6qp-mba6x-b
+          - const: tq,mba6b               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6qp-tqma6qp-b
+          - const: fsl,imx6qp
+
       - description: i.MX6DL based Boards
         items:
           - enum:
@@ -393,12 +472,15 @@ properties:
               - technexion,imx6dl-pico-pi      # TechNexion i.MX6DL Pico-Pi
               - technologic,imx6dl-ts4900
               - technologic,imx6dl-ts7970
+              - toradex,colibri_imx6dl      # Colibri iMX6 Modules
               - udoo,imx6dl-udoo          # Udoo i.MX6 Dual-lite Board
               - vdl,lanmcu                # Van der Laan LANMCU board
               - wand,imx6dl-wandboard     # Wandboard i.MX6 Dual Lite Board
-              - ysoft,imx6dl-yapp4-draco  # i.MX6 DualLite Y Soft IOTA Draco board
+              - ysoft,imx6dl-yapp4-draco  # i.MX6 Solo Y Soft IOTA Draco board
               - ysoft,imx6dl-yapp4-hydra  # i.MX6 DualLite Y Soft IOTA Hydra board
+              - ysoft,imx6dl-yapp4-lynx   # i.MX6 DualLite Y Soft IOTA Lynx board
               - ysoft,imx6dl-yapp4-orion  # i.MX6 DualLite Y Soft IOTA Orion board
+              - ysoft,imx6dl-yapp4-phoenix  # i.MX6 DualLite Y Soft IOTA Phoenix board
               - ysoft,imx6dl-yapp4-ursa   # i.MX6 Solo Y Soft IOTA Ursa board
           - const: fsl,imx6dl
 
@@ -466,20 +548,14 @@ properties:
           - const: phytec,imx6dl-pfla02   # PHYTEC phyFLEX-i.MX6 Quad
           - const: fsl,imx6dl
 
-      - description: i.MX6DL Toradex Colibri iMX6 Module on Colibri
-                     Evaluation Board V3
+      - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S Modules
         items:
-          - const: toradex,colibri_imx6dl-eval-v3
-          - const: toradex,colibri_imx6dl          # Colibri iMX6 Module
-          - const: fsl,imx6dl
-
-      - description: i.MX6DL Toradex Colibri iMX6 Module V1.1 on Colibri
-                     Evaluation Board V3
-        items:
-          - const: toradex,colibri_imx6dl-v1_1-eval-v3
-          - const: toradex,colibri_imx6dl-v1_1     # Colibri iMX6 Module V1.1
-          - const: toradex,colibri_imx6dl-eval-v3
-          - const: toradex,colibri_imx6dl          # Colibri iMX6 Module
+          - enum:
+              - toradex,colibri_imx6dl-aster        # Colibri iMX6DL/S Module on Aster Board
+              - toradex,colibri_imx6dl-eval-v3      # Colibri iMX6DL/S Module on Colibri Evaluation Board V3
+              - toradex,colibri_imx6dl-iris         # Colibri iMX6DL/S Module on Iris Board
+              - toradex,colibri_imx6dl-iris-v2      # Colibri iMX6DL/S Module on Iris Board V2
+          - const: toradex,colibri_imx6dl           # Colibri iMX6DL/S Module
           - const: fsl,imx6dl
 
       - description: i.MX6S DHCOM DRC02 Board
@@ -488,12 +564,29 @@ properties:
           - const: dh,imx6s-dhcom-som
           - const: fsl,imx6dl
 
+      - description: TQ-Systems TQMa6DL SoM (variant A) on MBa6x
+        items:
+          - const: tq,imx6dl-mba6x-a
+          - const: tq,mba6a               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6dl-tqma6dl-a
+          - const: fsl,imx6dl
+
+      - description: TQ-Systems TQMa6DL SoM (variant B) on MBa6x
+        items:
+          - const: tq,imx6dl-mba6x-b
+          - const: tq,mba6b               # Expected by bootloader, to be removed in the future
+          - const: tq,imx6dl-tqma6dl-b
+          - const: fsl,imx6dl
+
       - description: i.MX6SL based Boards
         items:
           - enum:
               - fsl,imx6sl-evk            # i.MX6 SoloLite EVK Board
+              - kobo,aura2
               - kobo,tolino-shine2hd
               - kobo,tolino-shine3
+              - kobo,tolino-vision
+              - kobo,tolino-vision5
               - revotics,imx6sl-warp      # Revotics WaRP Board
           - const: fsl,imx6sl
 
@@ -502,6 +595,7 @@ properties:
           - enum:
               - fsl,imx6sll-evk
               - kobo,clarahd
+              - kobo,librah2o
           - const: fsl,imx6sll
 
       - description: i.MX6SX based Boards
@@ -524,8 +618,7 @@ properties:
               - engicam,imx6ul-isiot      # Engicam Is.IoT MX6UL eMMC/NAND Starter kit
               - fsl,imx6ul-14x14-evk      # i.MX6 UltraLite 14x14 EVK Board
               - karo,imx6ul-tx6ul         # Ka-Ro electronics TXUL-0010 Module
-              - kontron,imx6ul-n6310-som  # Kontron N6310 SOM
-              - kontron,imx6ul-n6311-som  # Kontron N6311 SOM
+              - kontron,sl-imx6ul         # Kontron SL i.MX6UL SoM
               - prt,prti6g                # Protonic PRTI6G Board
               - technexion,imx6ul-pico-dwarf   # TechNexion i.MX6UL Pico-Dwarf
               - technexion,imx6ul-pico-hobbit  # TechNexion i.MX6UL Pico-Hobbit
@@ -561,33 +654,51 @@ properties:
           - const: phytec,imx6ul-pcl063   # PHYTEC phyCORE-i.MX 6UL
           - const: fsl,imx6ul
 
-      - description: Kontron N6310 S Board
+      - description: Kontron BL i.MX6UL (N631X S) Board
         items:
-          - const: kontron,imx6ul-n6310-s
-          - const: kontron,imx6ul-n6310-som
+          - const: kontron,bl-imx6ul       # Kontron BL i.MX6UL Carrier Board
+          - const: kontron,sl-imx6ul       # Kontron SL i.MX6UL SoM
           - const: fsl,imx6ul
 
-      - description: Kontron N6311 S Board
+      - description: Kontron BL i.MX6UL 43 (N631X S 43) Board
         items:
-          - const: kontron,imx6ul-n6311-s
-          - const: kontron,imx6ul-n6311-som
+          - const: kontron,bl-imx6ul-43    # Kontron BL i.MX6UL Carrier Board with 4.3" Display
+          - const: kontron,bl-imx6ul       # Kontron BL i.MX6UL Carrier Board
+          - const: kontron,sl-imx6ul       # Kontron SL i.MX6UL SoM
           - const: fsl,imx6ul
 
-      - description: Kontron N6310 S 43 Board
+      - description: TQ-Systems TQMa6UL1 SoM on MBa6ULx board
         items:
-          - const: kontron,imx6ul-n6310-s-43
-          - const: kontron,imx6ul-n6310-s
-          - const: kontron,imx6ul-n6310-som
+          - enum:
+              - tq,imx6ul-tqma6ul1-mba6ulx
+          - const: tq,imx6ul-tqma6ul1      # MCIMX6G1
+          - const: fsl,imx6ul
+
+      - description: TQ-Systems TQMa6UL2 SoM on MBa6ULx board
+        items:
+          - enum:
+              - tq,imx6ul-tqma6ul2-mba6ulx
+          - const: tq,imx6ul-tqma6ul2      # MCIMX6G2
+          - const: fsl,imx6ul
+
+      - description: TQ-Systems TQMa6ULxL SoM on MBa6ULx[L] board
+        items:
+          - enum:
+              - tq,imx6ul-tqma6ul2l-mba6ulx # using LGA adapter
+              - tq,imx6ul-tqma6ul2l-mba6ulxl
+          - const: tq,imx6ul-tqma6ul2l      # MCIMX6G2, LGA SoM variant
           - const: fsl,imx6ul
 
       - description: i.MX6ULL based Boards
         items:
           - enum:
               - fsl,imx6ull-14x14-evk     # i.MX6 UltraLiteLite 14x14 EVK Board
-              - kontron,imx6ull-n6411-som # Kontron N6411 SOM
+              - joz,jozacp                # JOZ Access Point
+              - kontron,sl-imx6ull        # Kontron SL i.MX6ULL SoM
               - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
-              - toradex,colibri-imx6ull-eval      # Colibri iMX6ULL Module on Colibri Eval Board
-              - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
+              - toradex,colibri-imx6ull      # Colibri iMX6ULL Modules
+              - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
+              - toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Modules
           - const: fsl,imx6ull
 
       - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board
@@ -596,6 +707,25 @@ properties:
           - const: armadeus,imx6ull-opos6ul     # OPOS6UL (i.MX6ULL) SoM
           - const: fsl,imx6ull
 
+      - description: i.MX6ULL chargebyte Tarragon Boards
+        items:
+          - enum:
+              - chargebyte,imx6ull-tarragon-master
+              - chargebyte,imx6ull-tarragon-micro
+              - chargebyte,imx6ull-tarragon-slave
+              - chargebyte,imx6ull-tarragon-slavext
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL DHCOM SoM based Boards
+        items:
+          - enum:
+              - dh,imx6ull-dhcom-drc02
+              - dh,imx6ull-dhcom-pdk2
+              - dh,imx6ull-dhcom-picoitx
+          - const: dh,imx6ull-dhcom-som # The DHCOR is soldered on the DHCOM
+          - const: dh,imx6ull-dhcor-som
+          - const: fsl,imx6ull
+
       - description: i.MX6ULL PHYTEC phyBOARD-Segin
         items:
           - enum:
@@ -605,15 +735,70 @@ properties:
           - const: phytec,imx6ull-pcl063  # PHYTEC phyCORE-i.MX 6ULL
           - const: fsl,imx6ull
 
-      - description: Kontron N6411 S Board
+      - description: i.MX6ULL PHYTEC phyGATE-Tauri
         items:
-          - const: kontron,imx6ull-n6411-s
-          - const: kontron,imx6ull-n6411-som
+          - enum:
+              - phytec,imx6ull-phygate-tauri-emmc
+              - phytec,imx6ull-phygate-tauri-nand
+          - const: phytec,imx6ull-phygate-tauri # PHYTEC phyGATE-Tauri with i.MX6 ULL
+          - const: phytec,imx6ull-pcl063        # PHYTEC phyCORE-i.MX 6ULL
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules
+        items:
+          - enum:
+              - toradex,colibri-imx6ull-aster     # Aster Carrier Board
+              - toradex,colibri-imx6ull-eval      # Colibri Evaluation Board V3
+              - toradex,colibri-imx6ull-iris      # Iris Carrier Board
+              - toradex,colibri-imx6ull-iris-v2   # Iris V2 Carrier Board
+          - const: toradex,colibri-imx6ull        # Colibri iMX6ULL Module
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module
+        items:
+          - enum:
+              - toradex,colibri-imx6ull-emmc-aster     # Aster Carrier Board
+              - toradex,colibri-imx6ull-emmc-eval      # Colibri Evaluation B. V3
+              - toradex,colibri-imx6ull-emmc-iris      # Iris Carrier Board
+              - toradex,colibri-imx6ull-emmc-iris-v2   # Iris V2 Carrier Board
+          - const: toradex,colibri-imx6ull-emmc        # Colibri iMX6ULL 1GB (eMMC) Module
+          - const: fsl,imx6ull
+
+      - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules
+        items:
+          - enum:
+              - toradex,colibri-imx6ull-wifi-eval     # Colibri Eval. B. V3
+              - toradex,colibri-imx6ull-wifi-aster    # Aster Carrier Board
+              - toradex,colibri-imx6ull-wifi-iris     # Iris Carrier Board
+              - toradex,colibri-imx6ull-wifi-iris-v2  # Iris V2 Carrier Board
+          - const: toradex,colibri-imx6ull-wifi       # Colibri iMX6ULL Wi-Fi / BT Module
+          - const: fsl,imx6ull
+
+      - description: Kontron BL i.MX6ULL (N6411 S) Board
+        items:
+          - const: kontron,bl-imx6ull   # Kontron BL i.MX6ULL Carrier Board
+          - const: kontron,sl-imx6ull   # Kontron SL i.MX6ULL SoM
+          - const: fsl,imx6ull
+
+      - description: TQ Systems TQMa6ULLx SoM on MBa6ULx board
+        items:
+          - enum:
+              - tq,imx6ull-tqma6ull2-mba6ulx
+          - const: tq,imx6ull-tqma6ull2      # MCIMX6Y2
+          - const: fsl,imx6ull
+
+      - description: TQ Systems TQMa6ULLxL SoM on MBa6ULx[L] board
+        items:
+          - enum:
+              - tq,imx6ull-tqma6ull2l-mba6ulx # using LGA adapter
+              - tq,imx6ull-tqma6ull2l-mba6ulxl
+          - const: tq,imx6ull-tqma6ull2l      # MCIMX6Y2, LGA SoM variant
           - const: fsl,imx6ull
 
       - description: i.MX6ULZ based Boards
         items:
           - enum:
+              - bsh,imx6ulz-bsh-smm-m2    # i.MX6 ULZ BSH SystemMaster
               - fsl,imx6ulz-14x14-evk     # i.MX6 ULZ 14x14 EVK Board
           - const: fsl,imx6ull # This seems odd. Should be last?
           - const: fsl,imx6ulz
@@ -622,6 +807,7 @@ properties:
         items:
           - enum:
               - element14,imx7s-warp      # Element14 Warp i.MX7 Board
+              - toradex,colibri-imx7s     # Colibri iMX7S Module
           - const: fsl,imx7s
 
       - description: i.MX7S Boards with Toradex Colibri iMX7S Module
@@ -629,6 +815,8 @@ properties:
           - enum:
               - toradex,colibri-imx7s-aster     # Module on Aster Carrier Board
               - toradex,colibri-imx7s-eval-v3   # Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx7s-iris      # Module on Iris Carrier Board
+              - toradex,colibri-imx7s-iris-v2   # Module on Iris Carrier Board V2
           - const: toradex,colibri-imx7s
           - const: fsl,imx7s
 
@@ -649,19 +837,13 @@ properties:
               - kam,imx7d-flex-concentrator-mfg   # Kamstrup OMNIA Flex Concentrator in manufacturing mode
               - novtech,imx7d-meerkat96   # i.MX7 Meerkat96 Board
               - remarkable,imx7d-remarkable2  # i.MX7D ReMarkable 2 E-Ink Tablet
+              - storopack,imx7d-smegw01       # Storopack i.MX7D SMEGW01
               - technexion,imx7d-pico-dwarf   # TechNexion i.MX7D Pico-Dwarf
               - technexion,imx7d-pico-hobbit  # TechNexion i.MX7D Pico-Hobbit
               - technexion,imx7d-pico-nymph   # TechNexion i.MX7D Pico-Nymph
               - technexion,imx7d-pico-pi      # TechNexion i.MX7D Pico-Pi
-              - toradex,colibri-imx7d                   # Colibri iMX7 Dual Module
-              - toradex,colibri-imx7d-aster             # Colibri iMX7 Dual Module on Aster Carrier Board
-              - toradex,colibri-imx7d-emmc              # Colibri iMX7 Dual 1GB (eMMC) Module
-              - toradex,colibri-imx7d-emmc-aster        # Colibri iMX7 Dual 1GB (eMMC) Module on
-                                                        #  Aster Carrier Board
-              - toradex,colibri-imx7d-emmc-eval-v3      # Colibri iMX7 Dual 1GB (eMMC) Module on
-                                                        #  Colibri Evaluation Board V3
-              - toradex,colibri-imx7d-eval-v3           # Colibri iMX7 Dual Module on
-                                                        #  Colibri Evaluation Board V3
+              - toradex,colibri-imx7d         # Colibri iMX7D Module
+              - toradex,colibri-imx7d-emmc    # Colibri iMX7D 1GB (eMMC) Module
               - zii,imx7d-rmu2            # ZII RMU2 Board
               - zii,imx7d-rpu2            # ZII RPU2 Board
           - const: fsl,imx7d
@@ -686,16 +868,20 @@ properties:
       - description: i.MX7D Boards with Toradex Colibri i.MX7D Module
         items:
           - enum:
-              - toradex,colibri-imx7d-aster   # Module on Aster Carrier Board
-              - toradex,colibri-imx7d-eval-v3 # Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-aster   # Aster Carrier Board
+              - toradex,colibri-imx7d-eval-v3 # Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-iris    # Iris Carrier Board
+              - toradex,colibri-imx7d-iris-v2 # Iris Carrier Board V2
           - const: toradex,colibri-imx7d
           - const: fsl,imx7d
 
-      - description: i.MX7D Boards with Toradex Colibri i.MX7D eMMC Module
+      - description: i.MX7D Boards with Toradex Colibri i.MX7D 1GB (eMMC) Module
         items:
           - enum:
               - toradex,colibri-imx7d-emmc-aster    # Module on Aster Carrier Board
               - toradex,colibri-imx7d-emmc-eval-v3  # Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx7d-emmc-iris     # Module on Iris Carrier Board
+              - toradex,colibri-imx7d-emmc-iris-v2  # Module on Iris Carrier Board V2
           - const: toradex,colibri-imx7d-emmc
           - const: fsl,imx7d
 
@@ -711,15 +897,25 @@ properties:
           - enum:
               - beacon,imx8mm-beacon-kit  # i.MX8MM Beacon Development Kit
               - boundary,imx8mm-nitrogen8mm  # i.MX8MM Nitrogen Board
+              - dmo,imx8mm-data-modul-edm-sbc # i.MX8MM eDM SBC
+              - emtrion,emcon-mx8mm-avari # emCON-MX8MM SoM on Avari Base
               - fsl,imx8mm-ddr4-evk       # i.MX8MM DDR4 EVK Board
               - fsl,imx8mm-evk            # i.MX8MM EVK Board
+              - gateworks,imx8mm-gw7904
               - gw,imx8mm-gw71xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw72xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw73xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw7901          # i.MX8MM Gateworks Board
               - gw,imx8mm-gw7902          # i.MX8MM Gateworks Board
-              - kontron,imx8mm-n801x-som  # i.MX8MM Kontron SL (N801X) SOM
+              - gw,imx8mm-gw7903          # i.MX8MM Gateworks Board
+              - innocomm,wb15-evk         # i.MX8MM Innocomm EVK board with WB15 SoM
+              - kontron,imx8mm-sl         # i.MX8MM Kontron SL (N801X) SOM
+              - kontron,imx8mm-osm-s      # i.MX8MM Kontron OSM-S (N802X) SOM
+              - toradex,verdin-imx8mm     # Verdin iMX8M Mini Modules
+              - toradex,verdin-imx8mm-nonwifi  # Verdin iMX8M Mini Modules without Wi-Fi / BT
+              - toradex,verdin-imx8mm-wifi  # Verdin iMX8M Mini Wi-Fi / BT Modules
               - variscite,var-som-mx8mm   # i.MX8MM Variscite VAR-SOM-MX8MM module
+              - prt,prt8mm                # i.MX8MM Protonic PRT8MM Board
           - const: fsl,imx8mm
 
       - description: Engicam i.Core MX8M Mini SoM based boards
@@ -732,8 +928,41 @@ properties:
 
       - description: Kontron BL i.MX8MM (N801X S) Board
         items:
-          - const: kontron,imx8mm-n801x-s
-          - const: kontron,imx8mm-n801x-som
+          - const: kontron,imx8mm-bl
+          - const: kontron,imx8mm-sl
+          - const: fsl,imx8mm
+
+      - description: Kontron BL i.MX8MM OSM-S (N802X S) Board
+        items:
+          - const: kontron,imx8mm-bl-osm-s
+          - const: kontron,imx8mm-osm-s
+          - const: fsl,imx8mm
+
+      - description: Toradex Boards with Verdin iMX8M Mini Modules
+        items:
+          - enum:
+              - menlo,mx8menlo                       # Verdin iMX8M Mini Module on i.MX8MM Menlo board
+              - toradex,verdin-imx8mm-nonwifi-dahlia # Verdin iMX8M Mini Module on Dahlia
+              - toradex,verdin-imx8mm-nonwifi-dev    # Verdin iMX8M Mini Module on Verdin Development Board
+              - toradex,verdin-imx8mm-nonwifi-yavia  # Verdin iMX8M Mini Module on Yavia
+          - const: toradex,verdin-imx8mm-nonwifi     # Verdin iMX8M Mini Module without Wi-Fi / BT
+          - const: toradex,verdin-imx8mm             # Verdin iMX8M Mini Module
+          - const: fsl,imx8mm
+
+      - description: Toradex Boards with Verdin iMX8M Mini Wi-Fi / BT Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mm-wifi-dahlia # Verdin iMX8M Mini Wi-Fi / BT Module on Dahlia
+              - toradex,verdin-imx8mm-wifi-dev    # Verdin iMX8M Mini Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-imx8mm-wifi-yavia  # Verdin iMX8M Mini Wi-Fi / BT Module on Yavia
+          - const: toradex,verdin-imx8mm-wifi     # Verdin iMX8M Mini Wi-Fi / BT Module
+          - const: toradex,verdin-imx8mm          # Verdin iMX8M Mini Module
+          - const: fsl,imx8mm
+
+      - description: PHYTEC phyCORE-i.MX8MM SoM based boards
+        items:
+          - const: phytec,imx8mm-phyboard-polis-rdk # phyBOARD-Polis RDK
+          - const: phytec,imx8mm-phycore-som        # phyCORE-i.MX8MM SoM
           - const: fsl,imx8mm
 
       - description: Variscite VAR-SOM-MX8MM based boards
@@ -742,10 +971,25 @@ properties:
           - const: variscite,var-som-mx8mm
           - const: fsl,imx8mm
 
+      - description:
+          TQMa8MxML is a series of SOM featuring NXP i.MX8MM system-on-chip
+          variants. It is designed to be soldered on different carrier boards.
+          All variants (TQMa8M[Q,D,S][L]ML) use the same device tree, hence only
+          one compatible is needed.
+        items:
+          - enum:
+              - cloos,imx8mm-phg           # i.MX8MM Cloos PHG Board
+              - tq,imx8mm-tqma8mqml-mba8mx # TQ-Systems GmbH i.MX8MM TQMa8MQML SOM on MBa8Mx
+          - const: tq,imx8mm-tqma8mqml     # TQ-Systems GmbH i.MX8MM TQMa8MQML SOM
+          - const: fsl,imx8mm
+
       - description: i.MX8MN based Boards
         items:
           - enum:
               - beacon,imx8mn-beacon-kit  # i.MX8MN Beacon Development Kit
+              - bsh,imx8mn-bsh-smm-s2     # i.MX8MN BSH SystemMaster S2
+              - bsh,imx8mn-bsh-smm-s2pro  # i.MX8MN BSH SystemMaster S2 PRO
+              - fsl,imx8mn-ddr3l-evk      # i.MX8MN DDR3L EVK Board
               - fsl,imx8mn-ddr4-evk       # i.MX8MN DDR4 EVK Board
               - fsl,imx8mn-evk            # i.MX8MN LPDDR4 EVK Board
               - gw,imx8mn-gw7902          # i.MX8MM Gateworks Board
@@ -757,10 +1001,51 @@ properties:
           - const: variscite,var-som-mx8mn
           - const: fsl,imx8mn
 
+      - description:
+          TQMa8MxNL is a series of SOM featuring NXP i.MX8MN system-on-chip
+          variants. It is designed to be soldered on different carrier boards.
+          All variants (TQMa8M[Q,D,S][L]NL) use the same device tree, hence only
+          one compatible is needed.
+        items:
+          - enum:
+              - tq,imx8mn-tqma8mqnl-mba8mx # TQ-Systems GmbH i.MX8MN TQMa8MQNL SOM on MBa8Mx
+          - const: tq,imx8mn-tqma8mqnl     # TQ-Systems GmbH i.MX8MN TQMa8MQNL SOM
+          - const: fsl,imx8mn
+
       - description: i.MX8MP based Boards
         items:
           - enum:
+              - beacon,imx8mp-beacon-kit  # i.MX8MP Beacon Development Kit
+              - dmo,imx8mp-data-modul-edm-sbc # i.MX8MP eDM SBC
               - fsl,imx8mp-evk            # i.MX8MP EVK Board
+              - gateworks,imx8mp-gw74xx   # i.MX8MP Gateworks Board
+              - polyhex,imx8mp-debix      # Polyhex Debix boards
+              - polyhex,imx8mp-debix-model-a # Polyhex Debix Model A Board
+              - toradex,verdin-imx8mp     # Verdin iMX8M Plus Modules
+              - toradex,verdin-imx8mp-nonwifi  # Verdin iMX8M Plus Modules without Wi-Fi / BT
+              - toradex,verdin-imx8mp-wifi  # Verdin iMX8M Plus Wi-Fi / BT Modules
+          - const: fsl,imx8mp
+
+      - description: Avnet (MSC Branded) Boards with SM2S i.MX8M Plus Modules
+        items:
+          - const: avnet,sm2s-imx8mp-14N0600E-ep1 # SM2S-IMX8PLUS-14N0600E on SM2-MB-EP1 Carrier Board
+          - const: avnet,sm2s-imx8mp-14N0600E     # 14N0600E variant of SM2S-IMX8PLUS SoM
+          - const: avnet,sm2s-imx8mp              # SM2S-IMX8PLUS SoM
+          - const: fsl,imx8mp
+
+      - description: i.MX8MP DHCOM based Boards
+        items:
+          - enum:
+              - dh,imx8mp-dhcom-pdk2         # i.MX8MP DHCOM SoM on PDK2 board
+              - dh,imx8mp-dhcom-pdk3         # i.MX8MP DHCOM SoM on PDK3 board
+          - const: dh,imx8mp-dhcom-som       # i.MX8MP DHCOM SoM
+          - const: fsl,imx8mp
+
+      - description: Engicam i.Core MX8M Plus SoM based boards
+        items:
+          - enum:
+              - engicam,icore-mx8mp-edimm2.2       # i.MX8MP Engicam i.Core MX8M Plus EDIMM2.2 Starter Kit
+          - const: engicam,icore-mx8mp             # i.MX8MP Engicam i.Core MX8M Plus SoM
           - const: fsl,imx8mp
 
       - description: PHYTEC phyCORE-i.MX8MP SoM based boards
@@ -769,6 +1054,38 @@ properties:
           - const: phytec,imx8mp-phycore-som         # phyCORE-i.MX8MP SoM
           - const: fsl,imx8mp
 
+      - description: Toradex Boards with Verdin iMX8M Plus Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia
+              - toradex,verdin-imx8mp-nonwifi-dev    # Verdin iMX8M Plus Module on Verdin Development Board
+              - toradex,verdin-imx8mp-nonwifi-yavia  # Verdin iMX8M Plus Module on Yavia
+          - const: toradex,verdin-imx8mp-nonwifi     # Verdin iMX8M Plus Module without Wi-Fi / BT
+          - const: toradex,verdin-imx8mp             # Verdin iMX8M Plus Module
+          - const: fsl,imx8mp
+
+      - description: Toradex Boards with Verdin iMX8M Plus Wi-Fi / BT Modules
+        items:
+          - enum:
+              - toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia
+              - toradex,verdin-imx8mp-wifi-dev    # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B.
+              - toradex,verdin-imx8mp-wifi-yavia  # Verdin iMX8M Plus Wi-Fi / BT Module on Yavia
+          - const: toradex,verdin-imx8mp-wifi     # Verdin iMX8M Plus Wi-Fi / BT Module
+          - const: toradex,verdin-imx8mp          # Verdin iMX8M Plus Module
+          - const: fsl,imx8mp
+
+      - description:
+          TQMa8MPxL is a series of LGA SOM featuring NXP i.MX8MP system-on-chip
+          variants. It is designed to be soldered on different carrier boards.
+          All CPU variants use the same device tree hence only one compatible
+          is needed. MBa8MPxL mainboard can be used as starterkit or in a boxed
+          version as an industrial computing device.
+        items:
+          - enum:
+              - tq,imx8mp-tqma8mpql-mba8mpxl # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM on MBa8MPxL
+          - const: tq,imx8mp-tqma8mpql       # TQ-Systems GmbH i.MX8MP TQMa8MPQL SOM
+          - const: fsl,imx8mp
+
       - description: i.MX8MQ based Boards
         items:
           - enum:
@@ -778,12 +1095,17 @@ properties:
               - fsl,imx8mq-evk            # i.MX8MQ EVK Board
               - google,imx8mq-phanbell    # Google Coral Edge TPU
               - kontron,pitx-imx8m        # Kontron pITX-imx8m Board
-              - mntre,reform2             # MNT Reform2 Laptop
               - purism,librem5-devkit     # Purism Librem5 devkit
               - solidrun,hummingboard-pulse # SolidRun Hummingboard Pulse
               - technexion,pico-pi-imx8m  # TechNexion PICO-PI-8M evk
           - const: fsl,imx8mq
 
+      - description: i.MX8MQ NITROGEN SoM based Boards
+        items:
+          - const: mntre,reform2                  # MNT Reform2 Laptop
+          - const: boundary,imx8mq-nitrogen8m-som # i.MX8MQ NITROGEN SoM
+          - const: fsl,imx8mq
+
       - description: Purism Librem5 phones
         items:
           - enum:
@@ -793,6 +1115,15 @@ properties:
           - const: purism,librem5
           - const: fsl,imx8mq
 
+      - description:
+          TQMa8Mx is a series of SOM featuring NXP i.MX8MQ system-on-chip
+          variants. It is designed to be clicked on different carrier boards.
+        items:
+          - enum:
+              - tq,imx8mq-tqma8mq-mba8mx # TQ-Systems GmbH i.MX8MQ TQMa8Mx SOM on MBa8Mx
+          - const: tq,imx8mq-tqma8mq     # TQ-Systems GmbH i.MX8MQ TQMa8Mx SOM
+          - const: fsl,imx8mq
+
       - description: Zodiac Inflight Innovations Ultra Boards
         items:
           - enum:
@@ -805,6 +1136,25 @@ properties:
         items:
           - enum:
               - fsl,imx8qm-mek           # i.MX8QM MEK Board
+              - toradex,apalis-imx8      # Apalis iMX8 Modules
+              - toradex,apalis-imx8-v1.1 # Apalis iMX8 V1.1 Modules
+          - const: fsl,imx8qm
+
+      - description: i.MX8QM Boards with Toradex Apalis iMX8 Modules
+        items:
+          - enum:
+              - toradex,apalis-imx8-eval            # Apalis iMX8 Module on Apalis Evaluation Board
+              - toradex,apalis-imx8-ixora-v1.1      # Apalis iMX8 Module on Ixora V1.1 Carrier Board
+          - const: toradex,apalis-imx8
+          - const: fsl,imx8qm
+
+      - description: i.MX8QM Boards with Toradex Apalis iMX8 V1.1 Modules
+        items:
+          - enum:
+              - toradex,apalis-imx8-v1.1-eval       # Apalis iMX8 V1.1 Module on Apalis Eval. Board
+              - toradex,apalis-imx8-v1.1-ixora-v1.1 # Apalis iMX8 V1.1 Module on Ixora V1.1 C. Board
+              - toradex,apalis-imx8-v1.1-ixora-v1.2 # Apalis iMX8 V1.1 Module on Ixora V1.2 C. Board
+          - const: toradex,apalis-imx8-v1.1
           - const: fsl,imx8qm
 
       - description: i.MX8QXP based Boards
@@ -812,16 +1162,49 @@ properties:
           - enum:
               - einfochips,imx8qxp-ai_ml  # i.MX8QXP AI_ML Board
               - fsl,imx8qxp-mek           # i.MX8QXP MEK Board
-              - toradex,colibri-imx8x         # Colibri iMX8X Module
+              - toradex,colibri-imx8x     # Colibri iMX8X Modules
           - const: fsl,imx8qxp
 
-      - description: Toradex Colibri i.MX8 Evaluation Board
+      - description: i.MX8DXL based Boards
         items:
           - enum:
+              - fsl,imx8dxl-evk           # i.MX8DXL EVK Board
+          - const: fsl,imx8dxl
+
+      - description: i.MX8QXP Boards with Toradex Colibri iMX8X Modules
+        items:
+          - enum:
+              - toradex,colibri-imx8x-aster   # Colibri iMX8X Module on Aster Board
               - toradex,colibri-imx8x-eval-v3 # Colibri iMX8X Module on Colibri Evaluation Board V3
+              - toradex,colibri-imx8x-iris    # Colibri iMX8X Module on Iris Board
+              - toradex,colibri-imx8x-iris-v2 # Colibri iMX8X Module on Iris Board V2
           - const: toradex,colibri-imx8x
           - const: fsl,imx8qxp
 
+      - description: i.MX8ULP based Boards
+        items:
+          - enum:
+              - fsl,imx8ulp-evk           # i.MX8ULP EVK Board
+          - const: fsl,imx8ulp
+
+      - description: i.MX93 based Boards
+        items:
+          - enum:
+              - fsl,imx93-11x11-evk       # i.MX93 11x11 EVK Board
+          - const: fsl,imx93
+
+      - description: i.MXRT1050 based Boards
+        items:
+          - enum:
+              - fsl,imxrt1050-evk         # i.MXRT1050 EVK Board
+          - const: fsl,imxrt1050
+
+      - description: i.MXRT1170 based Boards
+        items:
+          - enum:
+              - fsl,imxrt1170-evk         # i.MXRT1170 EVK Board
+          - const: fsl,imxrt1170
+
       - description:
           Freescale Vybrid Platform Device Tree Bindings
 
@@ -847,9 +1230,10 @@ properties:
       - description: VF610 based Boards
         items:
           - enum:
+              - fsl,vf610-twr             # VF610 Tower Board
               - lwn,bk4                   # Liebherr BK4 controller
               - phytec,vf610-cosmic       # PHYTEC Cosmic/Cosmic+ Board
-              - fsl,vf610-twr             # VF610 Tower Board
+              - toradex,vf610-colibri_vf61 # Colibri VF61 Modules
           - const: fsl,vf610
 
       - description: Toradex Colibri VF61 Module on Colibri Evaluation Board
@@ -884,8 +1268,10 @@ properties:
       - description: LS1021A based Boards
         items:
           - enum:
+              - fsl,ls1021a-iot
               - fsl,ls1021a-moxa-uc-8410a
               - fsl,ls1021a-qds
+              - fsl,ls1021a-tsn
               - fsl,ls1021a-twr
           - const: fsl,ls1021a
 
@@ -977,6 +1363,8 @@ properties:
       - description: LX2160A based Boards
         items:
           - enum:
+              - fsl,lx2160a-bluebox3
+              - fsl,lx2160a-bluebox3-rev-a
               - fsl,lx2160a-qds
               - fsl,lx2160a-rdb
               - fsl,lx2162a-qds
@@ -990,6 +1378,13 @@ properties:
           - const: solidrun,lx2160a-cex7
           - const: fsl,lx2160a
 
+      - description: S32G2 based Boards
+        items:
+          - enum:
+              - nxp,s32g274a-evb
+              - nxp,s32g274a-rdb2
+          - const: nxp,s32g2
+
       - description: S32V234 based Boards
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/arm/fw-cfg.txt b/Documentation/devicetree/bindings/arm/fw-cfg.txt
deleted file mode 100644
index fd54e1db2156..000000000000
--- a/Documentation/devicetree/bindings/arm/fw-cfg.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* QEMU Firmware Configuration bindings for ARM
-
-QEMU's arm-softmmu and aarch64-softmmu emulation / virtualization targets
-provide the following Firmware Configuration interface on the "virt" machine
-type:
-
-- A write-only, 16-bit wide selector (or control) register,
-- a read-write, 64-bit wide data register.
-
-QEMU exposes the control and data register to ARM guests as memory mapped
-registers; their location is communicated to the guest's UEFI firmware in the
-DTB that QEMU places at the bottom of the guest's DRAM.
-
-The authoritative guest-side hardware interface documentation to the fw_cfg
-device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree.
-
-
-Required properties:
-
-- compatible: "qemu,fw-cfg-mmio".
-
-- reg: the MMIO region used by the device.
-  * Bytes 0x0 to 0x7 cover the data register.
-  * Bytes 0x8 to 0x9 cover the selector register.
-  * Further registers may be appended to the region in case of future interface
-    revisions / feature bits.
-
-Example:
-
-/ {
-	#size-cells = <0x2>;
-	#address-cells = <0x2>;
-
-	fw-cfg@9020000 {
-		compatible = "qemu,fw-cfg-mmio";
-		reg = <0x0 0x9020000 0x0 0xa>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
index 7378159e61df..483caf0ce25b 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
+++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
@@ -17,14 +17,15 @@ properties:
       - const: hisilicon,hip04-bootwrapper
 
   boot-method:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
       Address and size of boot method.
       [0]: bootwrapper physical address
       [1]: bootwrapper size
       [2]: relocation physical address
       [3]: relocation size
-    minItems: 1
-    maxItems: 2
+    minItems: 2
+    maxItems: 4
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
index b38458022946..540876322040 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/hisilicon/hisilicon.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Hisilicon Platforms Device Tree Bindings
+title: Hisilicon Platforms
 
 maintainers:
   - Wei Xu <xuwei5@hisilicon.com>
diff --git a/Documentation/devicetree/bindings/arm/hpe,gxp.yaml b/Documentation/devicetree/bindings/arm/hpe,gxp.yaml
new file mode 100644
index 000000000000..224bbcb93f95
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hpe,gxp.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/hpe,gxp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE BMC GXP platforms
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+  - Jean-Marie Verdun <verdun@hpe.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: GXP Based Boards
+        items:
+          - enum:
+              - hpe,gxp-dl360gen10
+          - const: hpe,gxp
+
+required:
+  - compatible
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/idle-states.yaml b/Documentation/devicetree/bindings/arm/idle-states.yaml
deleted file mode 100644
index 52bce5dbb11f..000000000000
--- a/Documentation/devicetree/bindings/arm/idle-states.yaml
+++ /dev/null
@@ -1,661 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/idle-states.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: ARM idle states binding description
-
-maintainers:
-  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-
-description: |+
-  ==========================================
-  1 - Introduction
-  ==========================================
-
-  ARM systems contain HW capable of managing power consumption dynamically,
-  where cores can be put in different low-power states (ranging from simple wfi
-  to power gating) according to OS PM policies. The CPU states representing the
-  range of dynamic idle states that a processor can enter at run-time, can be
-  specified through device tree bindings representing the parameters required to
-  enter/exit specific idle states on a given processor.
-
-  According to the Server Base System Architecture document (SBSA, [3]), the
-  power states an ARM CPU can be put into are identified by the following list:
-
-  - Running
-  - Idle_standby
-  - Idle_retention
-  - Sleep
-  - Off
-
-  The power states described in the SBSA document define the basic CPU states on
-  top of which ARM platforms implement power management schemes that allow an OS
-  PM implementation to put the processor in different idle states (which include
-  states listed above; "off" state is not an idle state since it does not have
-  wake-up capabilities, hence it is not considered in this document).
-
-  Idle state parameters (e.g. entry latency) are platform specific and need to
-  be characterized with bindings that provide the required information to OS PM
-  code so that it can build the required tables and use them at runtime.
-
-  The device tree binding definition for ARM idle states is the subject of this
-  document.
-
-  ===========================================
-  2 - idle-states definitions
-  ===========================================
-
-  Idle states are characterized for a specific system through a set of
-  timing and energy related properties, that underline the HW behaviour
-  triggered upon idle states entry and exit.
-
-  The following diagram depicts the CPU execution phases and related timing
-  properties required to enter and exit an idle state:
-
-  ..__[EXEC]__|__[PREP]__|__[ENTRY]__|__[IDLE]__|__[EXIT]__|__[EXEC]__..
-              |          |           |          |          |
-
-              |<------ entry ------->|
-              |       latency        |
-                                                |<- exit ->|
-                                                |  latency |
-              |<-------- min-residency -------->|
-                         |<-------  wakeup-latency ------->|
-
-      Diagram 1: CPU idle state execution phases
-
-  EXEC:  Normal CPU execution.
-
-  PREP:  Preparation phase before committing the hardware to idle mode
-    like cache flushing. This is abortable on pending wake-up
-    event conditions. The abort latency is assumed to be negligible
-    (i.e. less than the ENTRY + EXIT duration). If aborted, CPU
-    goes back to EXEC. This phase is optional. If not abortable,
-    this should be included in the ENTRY phase instead.
-
-  ENTRY:  The hardware is committed to idle mode. This period must run
-    to completion up to IDLE before anything else can happen.
-
-  IDLE:  This is the actual energy-saving idle period. This may last
-    between 0 and infinite time, until a wake-up event occurs.
-
-  EXIT:  Period during which the CPU is brought back to operational
-    mode (EXEC).
-
-  entry-latency: Worst case latency required to enter the idle state. The
-  exit-latency may be guaranteed only after entry-latency has passed.
-
-  min-residency: Minimum period, including preparation and entry, for a given
-  idle state to be worthwhile energywise.
-
-  wakeup-latency: Maximum delay between the signaling of a wake-up event and the
-  CPU being able to execute normal code again. If not specified, this is assumed
-  to be entry-latency + exit-latency.
-
-  These timing parameters can be used by an OS in different circumstances.
-
-  An idle CPU requires the expected min-residency time to select the most
-  appropriate idle state based on the expected expiry time of the next IRQ
-  (i.e. wake-up) that causes the CPU to return to the EXEC phase.
-
-  An operating system scheduler may need to compute the shortest wake-up delay
-  for CPUs in the system by detecting how long will it take to get a CPU out
-  of an idle state, e.g.:
-
-  wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0)
-
-  In other words, the scheduler can make its scheduling decision by selecting
-  (e.g. waking-up) the CPU with the shortest wake-up delay.
-  The wake-up delay must take into account the entry latency if that period
-  has not expired. The abortable nature of the PREP period can be ignored
-  if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than
-  the worst case since it depends on the CPU operating conditions, i.e. caches
-  state).
-
-  An OS has to reliably probe the wakeup-latency since some devices can enforce
-  latency constraint guarantees to work properly, so the OS has to detect the
-  worst case wake-up latency it can incur if a CPU is allowed to enter an
-  idle state, and possibly to prevent that to guarantee reliable device
-  functioning.
-
-  The min-residency time parameter deserves further explanation since it is
-  expressed in time units but must factor in energy consumption coefficients.
-
-  The energy consumption of a cpu when it enters a power state can be roughly
-  characterised by the following graph:
-
-                 |
-                 |
-                 |
-             e   |
-             n   |                                      /---
-             e   |                               /------
-             r   |                        /------
-             g   |                  /-----
-             y   |           /------
-                 |       ----
-                 |      /|
-                 |     / |
-                 |    /  |
-                 |   /   |
-                 |  /    |
-                 | /     |
-                 |/      |
-            -----|-------+----------------------------------
-                0|       1                              time(ms)
-
-      Graph 1: Energy vs time example
-
-  The graph is split in two parts delimited by time 1ms on the X-axis.
-  The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope
-  and denotes the energy costs incurred while entering and leaving the idle
-  state.
-  The graph curve in the area delimited by X-axis values = {x | x > 1ms } has
-  shallower slope and essentially represents the energy consumption of the idle
-  state.
-
-  min-residency is defined for a given idle state as the minimum expected
-  residency time for a state (inclusive of preparation and entry) after
-  which choosing that state become the most energy efficient option. A good
-  way to visualise this, is by taking the same graph above and comparing some
-  states energy consumptions plots.
-
-  For sake of simplicity, let's consider a system with two idle states IDLE1,
-  and IDLE2:
-
-            |
-            |
-            |
-            |                                                  /-- IDLE1
-         e  |                                              /---
-         n  |                                         /----
-         e  |                                     /---
-         r  |                                /-----/--------- IDLE2
-         g  |                    /-------/---------
-         y  |        ------------    /---|
-            |       /           /----    |
-            |      /        /---         |
-            |     /    /----             |
-            |    / /---                  |
-            |   ---                      |
-            |  /                         |
-            | /                          |
-            |/                           |                  time
-         ---/----------------------------+------------------------
-            |IDLE1-energy < IDLE2-energy | IDLE2-energy < IDLE1-energy
-                                         |
-                                  IDLE2-min-residency
-
-      Graph 2: idle states min-residency example
-
-  In graph 2 above, that takes into account idle states entry/exit energy
-  costs, it is clear that if the idle state residency time (i.e. time till next
-  wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state
-  choice energywise.
-
-  This is mainly down to the fact that IDLE1 entry/exit energy costs are lower
-  than IDLE2.
-
-  However, the lower power consumption (i.e. shallower energy curve slope) of
-  idle state IDLE2 implies that after a suitable time, IDLE2 becomes more energy
-  efficient.
-
-  The time at which IDLE2 becomes more energy efficient than IDLE1 (and other
-  shallower states in a system with multiple idle states) is defined
-  IDLE2-min-residency and corresponds to the time when energy consumption of
-  IDLE1 and IDLE2 states breaks even.
-
-  The definitions provided in this section underpin the idle states
-  properties specification that is the subject of the following sections.
-
-  ===========================================
-  3 - idle-states node
-  ===========================================
-
-  ARM processor idle states are defined within the idle-states node, which is
-  a direct child of the cpus node [1] and provides a container where the
-  processor idle states, defined as device tree nodes, are listed.
-
-  On ARM systems, it is a container of processor idle states nodes. If the
-  system does not provide CPU power management capabilities, or the processor
-  just supports idle_standby, an idle-states node is not required.
-
-  ===========================================
-  4 - References
-  ===========================================
-
-  [1] ARM Linux Kernel documentation - CPUs bindings
-      Documentation/devicetree/bindings/arm/cpus.yaml
-
-  [2] ARM Linux Kernel documentation - PSCI bindings
-      Documentation/devicetree/bindings/arm/psci.yaml
-
-  [3] ARM Server Base System Architecture (SBSA)
-      http://infocenter.arm.com/help/index.jsp
-
-  [4] ARM Architecture Reference Manuals
-      http://infocenter.arm.com/help/index.jsp
-
-  [6] ARM Linux Kernel documentation - Booting AArch64 Linux
-      Documentation/arm64/booting.rst
-
-properties:
-  $nodename:
-    const: idle-states
-
-  entry-method:
-    description: |
-      Usage and definition depend on ARM architecture version.
-
-      On ARM v8 64-bit this property is required.
-      On ARM 32-bit systems this property is optional
-
-      This assumes that the "enable-method" property is set to "psci" in the cpu
-      node[6] that is responsible for setting up CPU idle management in the OS
-      implementation.
-    const: psci
-
-patternProperties:
-  "^(cpu|cluster)-":
-    type: object
-    description: |
-      Each state node represents an idle state description and must be defined
-      as follows.
-
-      The idle state entered by executing the wfi instruction (idle_standby
-      SBSA,[3][4]) is considered standard on all ARM platforms and therefore
-      must not be listed.
-
-      In addition to the properties listed above, a state node may require
-      additional properties specific to the entry-method defined in the
-      idle-states node. Please refer to the entry-method bindings
-      documentation for properties definitions.
-
-    properties:
-      compatible:
-        const: arm,idle-state
-
-      local-timer-stop:
-        description:
-          If present the CPU local timer control logic is
-             lost on state entry, otherwise it is retained.
-        type: boolean
-
-      entry-latency-us:
-        description:
-          Worst case latency in microseconds required to enter the idle state.
-
-      exit-latency-us:
-        description:
-          Worst case latency in microseconds required to exit the idle state.
-          The exit-latency-us duration may be guaranteed only after
-          entry-latency-us has passed.
-
-      min-residency-us:
-        description:
-          Minimum residency duration in microseconds, inclusive of preparation
-          and entry, for this idle state to be considered worthwhile energy wise
-          (refer to section 2 of this document for a complete description).
-
-      wakeup-latency-us:
-        description: |
-          Maximum delay between the signaling of a wake-up event and the CPU
-          being able to execute normal code again. If omitted, this is assumed
-          to be equal to:
-
-            entry-latency-us + exit-latency-us
-
-          It is important to supply this value on systems where the duration of
-          PREP phase (see diagram 1, section 2) is non-neglibigle. In such
-          systems entry-latency-us + exit-latency-us will exceed
-          wakeup-latency-us by this duration.
-
-      idle-state-name:
-        $ref: /schemas/types.yaml#/definitions/string
-        description:
-          A string used as a descriptive name for the idle state.
-
-    required:
-      - compatible
-      - entry-latency-us
-      - exit-latency-us
-      - min-residency-us
-
-additionalProperties: false
-
-examples:
-  - |
-
-    cpus {
-        #size-cells = <0>;
-        #address-cells = <2>;
-
-        cpu@0 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x0>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@1 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x1>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@100 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x100>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@101 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x101>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@10000 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x10000>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@10001 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x10001>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@10100 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x10100>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@10101 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a57";
-            reg = <0x0 0x10101>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_0_0 &CPU_SLEEP_0_0
-                   &CLUSTER_RETENTION_0 &CLUSTER_SLEEP_0>;
-        };
-
-        cpu@100000000 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x0>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100000001 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x1>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100000100 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x100>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100000101 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x101>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100010000 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x10000>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100010001 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x10001>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100010100 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x10100>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        cpu@100010101 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a53";
-            reg = <0x1 0x10101>;
-            enable-method = "psci";
-            cpu-idle-states = <&CPU_RETENTION_1_0 &CPU_SLEEP_1_0
-                   &CLUSTER_RETENTION_1 &CLUSTER_SLEEP_1>;
-        };
-
-        idle-states {
-            entry-method = "psci";
-
-            CPU_RETENTION_0_0: cpu-retention-0-0 {
-                compatible = "arm,idle-state";
-                arm,psci-suspend-param = <0x0010000>;
-                entry-latency-us = <20>;
-                exit-latency-us = <40>;
-                min-residency-us = <80>;
-            };
-
-            CLUSTER_RETENTION_0: cluster-retention-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x1010000>;
-                entry-latency-us = <50>;
-                exit-latency-us = <100>;
-                min-residency-us = <250>;
-                wakeup-latency-us = <130>;
-            };
-
-            CPU_SLEEP_0_0: cpu-sleep-0-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x0010000>;
-                entry-latency-us = <250>;
-                exit-latency-us = <500>;
-                min-residency-us = <950>;
-            };
-
-            CLUSTER_SLEEP_0: cluster-sleep-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x1010000>;
-                entry-latency-us = <600>;
-                exit-latency-us = <1100>;
-                min-residency-us = <2700>;
-                wakeup-latency-us = <1500>;
-            };
-
-            CPU_RETENTION_1_0: cpu-retention-1-0 {
-                compatible = "arm,idle-state";
-                arm,psci-suspend-param = <0x0010000>;
-                entry-latency-us = <20>;
-                exit-latency-us = <40>;
-                min-residency-us = <90>;
-            };
-
-            CLUSTER_RETENTION_1: cluster-retention-1 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x1010000>;
-                entry-latency-us = <50>;
-                exit-latency-us = <100>;
-                min-residency-us = <270>;
-                wakeup-latency-us = <100>;
-            };
-
-            CPU_SLEEP_1_0: cpu-sleep-1-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x0010000>;
-                entry-latency-us = <70>;
-                exit-latency-us = <100>;
-                min-residency-us = <300>;
-                wakeup-latency-us = <150>;
-            };
-
-            CLUSTER_SLEEP_1: cluster-sleep-1 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                arm,psci-suspend-param = <0x1010000>;
-                entry-latency-us = <500>;
-                exit-latency-us = <1200>;
-                min-residency-us = <3500>;
-                wakeup-latency-us = <1300>;
-            };
-        };
-    };
-
-  - |
-    // Example 2 (ARM 32-bit, 8-cpu system, two clusters):
-
-    cpus {
-        #size-cells = <0>;
-        #address-cells = <1>;
-
-        cpu@0 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a15";
-            reg = <0x0>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
-        };
-
-        cpu@1 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a15";
-            reg = <0x1>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
-        };
-
-        cpu@2 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a15";
-            reg = <0x2>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
-        };
-
-        cpu@3 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a15";
-            reg = <0x3>;
-            cpu-idle-states = <&cpu_sleep_0_0 &cluster_sleep_0>;
-        };
-
-        cpu@100 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a7";
-            reg = <0x100>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
-        };
-
-        cpu@101 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a7";
-            reg = <0x101>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
-        };
-
-        cpu@102 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a7";
-            reg = <0x102>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
-        };
-
-        cpu@103 {
-            device_type = "cpu";
-            compatible = "arm,cortex-a7";
-            reg = <0x103>;
-            cpu-idle-states = <&cpu_sleep_1_0 &cluster_sleep_1>;
-        };
-
-        idle-states {
-            cpu_sleep_0_0: cpu-sleep-0-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                entry-latency-us = <200>;
-                exit-latency-us = <100>;
-                min-residency-us = <400>;
-                wakeup-latency-us = <250>;
-            };
-
-            cluster_sleep_0: cluster-sleep-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                entry-latency-us = <500>;
-                exit-latency-us = <1500>;
-                min-residency-us = <2500>;
-                wakeup-latency-us = <1700>;
-            };
-
-            cpu_sleep_1_0: cpu-sleep-1-0 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                entry-latency-us = <300>;
-                exit-latency-us = <500>;
-                min-residency-us = <900>;
-                wakeup-latency-us = <600>;
-            };
-
-            cluster_sleep_1: cluster-sleep-1 {
-                compatible = "arm,idle-state";
-                local-timer-stop;
-                entry-latency-us = <800>;
-                exit-latency-us = <2000>;
-                min-residency-us = <6500>;
-                wakeup-latency-us = <2300>;
-            };
-        };
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/arm/intel,keembay.yaml b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
index 107e686ab207..53d2ce02b207 100644
--- a/Documentation/devicetree/bindings/arm/intel,keembay.yaml
+++ b/Documentation/devicetree/bindings/arm/intel,keembay.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/intel,keembay.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Keem Bay platform device tree bindings
+title: Keem Bay platform
 
 maintainers:
   - Paul J. Murphy <paul.j.murphy@intel.com>
diff --git a/Documentation/devicetree/bindings/arm/intel,socfpga.yaml b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
new file mode 100644
index 000000000000..4b4dcf551eb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/intel,socfpga.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA platform
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    oneOf:
+      - description: AgileX boards
+        items:
+          - enum:
+              - intel,n5x-socdk
+              - intel,socfpga-agilex-n6000
+              - intel,socfpga-agilex-socdk
+          - const: intel,socfpga-agilex
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
index 230bffeec0e5..553dcbc70e35 100644
--- a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
+++ b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/intel-ixp4xx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel IXP4xx Device Tree Bindings
+title: Intel IXP4xx
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
index 5cbcacaeb441..ff378d5cbd32 100644
--- a/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/keystone/ti,k3-sci-common.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common K3 TI-SCI bindings
+title: Common K3 TI-SCI
 
 maintainers:
   - Nishanth Menon <nm@ti.com>
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
index 34f5f877d444..91b96065f7df 100644
--- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/keystone/ti,sci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI-SCI controller device node bindings
+title: TI-SCI controller
 
 maintainers:
   - Nishanth Menon <nm@ti.com>
diff --git a/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml b/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml
new file mode 100644
index 000000000000..c7c5eb48fc7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/linux,dummy-virt.yaml
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/linux,dummy-virt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QEMU virt machine
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  $nodename:
+    const: "/"
+  compatible:
+    const: linux,dummy-virt
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
index 052a967c1f28..c83245065d44 100644
--- a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
@@ -72,7 +72,7 @@ mpp19	19	gpio, uart0(rxd), sdio(pw_off)
 GPIO:
 -----
 For common binding part and usage, refer to
-Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.
+Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml.
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
index f6d6642d81c0..29fa93dad52b 100644
--- a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt
@@ -1,21 +1,3 @@
-Marvell Armada 37xx Platforms Device Tree Bindings
---------------------------------------------------
-
-Boards using a SoC of the Marvell Armada 37xx family must carry the
-following root node property:
-
- - compatible: must contain "marvell,armada3710"
-
-In addition, boards using the Marvell Armada 3720 SoC shall have the
-following property before the previous one:
-
- - compatible: must contain "marvell,armada3720"
-
-Example:
-
-compatible = "marvell,armada-3720-db", "marvell,armada3720", "marvell,armada3710";
-
-
 Power management
 ----------------
 
@@ -48,11 +30,3 @@ avs: avs@11500 {
 	compatible = "marvell,armada-3700-avs", "syscon";
 	reg = <0x11500 0x40>;
 }
-
-
-CZ.NIC's Turris Mox SOHO router Device Tree Bindings
-----------------------------------------------------
-
-Required root node property:
-
- - compatible: must contain "cznic,turris-mox"
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
new file mode 100644
index 000000000000..6905d29f3108
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-37xx.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/armada-37xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 37xx Platforms
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Armada 3720 SoC boards
+        items:
+          - enum:
+              - cznic,turris-mox
+              - globalscale,espressobin
+              - marvell,armada-3720-db
+              - methode,edpu
+              - methode,udpu
+          - const: marvell,armada3720
+          - const: marvell,armada3710
+
+      - description: Globalscale Espressobin boards
+        items:
+          - enum:
+              - globalscale,espressobin-emmc
+              - globalscale,espressobin-ultra
+              - globalscale,espressobin-v7
+          - const: globalscale,espressobin
+          - const: marvell,armada3720
+          - const: marvell,armada3710
+
+      - description: Globalscale Espressobin V7 boards
+        items:
+          - enum:
+              - globalscale,espressobin-v7-emmc
+          - const: globalscale,espressobin-v7
+          - const: globalscale,espressobin
+          - const: marvell,armada3720
+          - const: marvell,armada3710
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
index e9bf3054529f..52d78521e412 100644
--- a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/marvell/armada-7k-8k.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell Armada 7K/8K Platforms Device Tree Bindings
+title: Marvell Armada 7K/8K Platforms
 
 maintainers:
   - Gregory CLEMENT <gregory.clement@bootlin.com>
diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
index 0705e765f432..d84105c7c935 100644
--- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
@@ -156,7 +156,7 @@ GPIO:
 -----
 
 For common binding part and usage, refer to
-Documentation/devicetree/bindings/gpio/gpio-mvebu.txt.
+Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml.
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml
new file mode 100644
index 000000000000..8960fb8b2b2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/marvell,ac5.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/marvell/marvell,ac5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Alleycat5/5X Platforms
+
+maintainers:
+  - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Alleycat5 (98DX25xx) Reference Design
+        items:
+          - enum:
+              - marvell,rd-ac5
+          - const: marvell,ac5
+
+      - description: Alleycat5X (98DX35xx) Reference Design
+        items:
+          - enum:
+              - marvell,rd-ac5x
+          - const: marvell,ac5x
+          - const: marvell,ac5
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 80a05f6fee85..ae12b1cab9fb 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/mediatek.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek SoC based Platforms Device Tree Bindings
+title: MediaTek SoC based Platforms
 
 maintainers:
   - Sean Wang <sean.wang@mediatek.com>
@@ -32,6 +32,11 @@ properties:
           - const: mediatek,mt6580
       - items:
           - enum:
+              - prestigio,pmt5008-3g
+          - const: mediatek,mt6582
+      - items:
+          - enum:
+              - fairphone,fp1
               - mundoreader,bq-aquaris5
           - const: mediatek,mt6589
       - items:
@@ -53,6 +58,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt6795-evb
+              - sony,xperia-m5
           - const: mediatek,mt6795
       - items:
           - enum:
@@ -78,6 +84,15 @@ properties:
           - const: mediatek,mt7629
       - items:
           - enum:
+              - bananapi,bpi-r3
+              - mediatek,mt7986a-rfb
+          - const: mediatek,mt7986a
+      - items:
+          - enum:
+              - mediatek,mt7986b-rfb
+          - const: mediatek,mt7986b
+      - items:
+          - enum:
               - mediatek,mt8127-moose
           - const: mediatek,mt8127
       - items:
@@ -118,8 +133,43 @@ properties:
           - enum:
               - mediatek,mt8183-evb
           - const: mediatek,mt8183
+      - description: Google Hayato
+        items:
+          - const: google,hayato-rev1
+          - const: google,hayato
+          - const: mediatek,mt8192
+      - description: Google Spherion (Acer Chromebook 514)
+        items:
+          - const: google,spherion-rev3
+          - const: google,spherion-rev2
+          - const: google,spherion-rev1
+          - const: google,spherion-rev0
+          - const: google,spherion
+          - const: mediatek,mt8192
+      - description: Acer Tomato (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - enum:
+              - google,tomato-rev2
+              - google,tomato-rev1
+          - const: google,tomato
+          - const: mediatek,mt8195
+      - description: Acer Tomato rev3 - 4 (Acer Chromebook Spin 513 CP513-2H)
+        items:
+          - const: google,tomato-rev4
+          - const: google,tomato-rev3
+          - const: google,tomato
+          - const: mediatek,mt8195
       - items:
           - enum:
+              - mediatek,mt8186-evb
+          - const: mediatek,mt8186
+      - items:
+          - enum:
+              - mediatek,mt8192-evb
+          - const: mediatek,mt8192
+      - items:
+          - enum:
+              - mediatek,mt8195-demo
               - mediatek,mt8195-evb
           - const: mediatek,mt8195
       - description: Google Burnet (HP Chromebook x360 11MK G3 EE)
@@ -133,6 +183,10 @@ properties:
               - google,krane-sku176
           - const: google,krane
           - const: mediatek,mt8183
+      - description: Google Cozmo (Acer Chromebook 314)
+        items:
+          - const: google,cozmo
+          - const: mediatek,mt8183
       - description: Google Damu (ASUS Chromebook Flip CM3)
         items:
           - const: google,damu
@@ -142,7 +196,9 @@ properties:
           - enum:
               - google,fennel-sku0
               - google,fennel-sku1
+              - google,fennel-sku2
               - google,fennel-sku6
+              - google,fennel-sku7
           - const: google,fennel
           - const: mediatek,mt8183
       - description: Google Juniper (Acer Chromebook Spin 311) / Kenzo (Acer Chromebook 311)
@@ -158,6 +214,12 @@ properties:
           - const: google,kakadu-rev2
           - const: google,kakadu
           - const: mediatek,mt8183
+      - description: Google Kakadu (ASUS Chromebook Detachable CM3)
+        items:
+          - const: google,kakadu-rev3-sku22
+          - const: google,kakadu-rev2-sku22
+          - const: google,kakadu
+          - const: mediatek,mt8183
       - description: Google Kappa (HP Chromebook 11a)
         items:
           - const: google,kappa
@@ -184,6 +246,10 @@ properties:
           - const: mediatek,mt8183
       - items:
           - enum:
+              - mediatek,mt8365-evk
+          - const: mediatek,mt8365
+      - items:
+          - enum:
               - mediatek,mt8516-pumpkin
           - const: mediatek,mt8516
 
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
deleted file mode 100644
index ea827e8763de..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Mediatek apmixedsys controller
-==============================
-
-The Mediatek apmixedsys controller provides the PLLs to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-apmixedsys"
-	- "mediatek,mt2712-apmixedsys", "syscon"
-	- "mediatek,mt6765-apmixedsys", "syscon"
-	- "mediatek,mt6779-apmixedsys", "syscon"
-	- "mediatek,mt6797-apmixedsys"
-	- "mediatek,mt7622-apmixedsys"
-	- "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys"
-	- "mediatek,mt7629-apmixedsys"
-	- "mediatek,mt8135-apmixedsys"
-	- "mediatek,mt8167-apmixedsys", "syscon"
-	- "mediatek,mt8173-apmixedsys"
-	- "mediatek,mt8183-apmixedsys", "syscon"
-	- "mediatek,mt8516-apmixedsys"
-- #clock-cells: Must be 1
-
-The apmixedsys controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-apmixedsys: clock-controller@10209000 {
-	compatible = "mediatek,mt8173-apmixedsys";
-	reg = <0 0x10209000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
index 6b7e8067e7aa..eccd4b706a78 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
@@ -10,6 +10,8 @@ Required Properties:
 	- "mediatek,mt7622-ethsys", "syscon"
 	- "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
 	- "mediatek,mt7629-ethsys", "syscon"
+	- "mediatek,mt7981-ethsys", "syscon"
+	- "mediatek,mt7986-ethsys", "syscon"
 - #clock-cells: Must be 1
 - #reset-cells: Must be 1
 
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
deleted file mode 100644
index eb3523c7a7be..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Mediatek infracfg controller
-============================
-
-The Mediatek infracfg controller provides various clocks and reset
-outputs to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-infracfg", "syscon"
-	- "mediatek,mt2712-infracfg", "syscon"
-	- "mediatek,mt6765-infracfg", "syscon"
-	- "mediatek,mt6779-infracfg_ao", "syscon"
-	- "mediatek,mt6797-infracfg", "syscon"
-	- "mediatek,mt7622-infracfg", "syscon"
-	- "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon"
-	- "mediatek,mt7629-infracfg", "syscon"
-	- "mediatek,mt8135-infracfg", "syscon"
-	- "mediatek,mt8167-infracfg", "syscon"
-	- "mediatek,mt8173-infracfg", "syscon"
-	- "mediatek,mt8183-infracfg", "syscon"
-	- "mediatek,mt8516-infracfg", "syscon"
-- #clock-cells: Must be 1
-- #reset-cells: Must be 1
-
-The infracfg controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-Also it uses the common reset controller binding from
-Documentation/devicetree/bindings/reset/reset.txt.
-The available reset outputs are defined in
-dt-bindings/reset/mt*-resets.h
-
-Example:
-
-infracfg: power-controller@10001000 {
-	compatible = "mediatek,mt8173-infracfg", "syscon";
-	reg = <0 0x10001000 0 0x1000>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
new file mode 100644
index 000000000000..ea98043c6ba3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,infracfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Infrastructure System Configuration Controller
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  The Mediatek infracfg controller provides various clocks and reset outputs
+  to the system. The clock values can be found in <dt-bindings/clock/mt*-clk.h>,
+  and reset values in <dt-bindings/reset/mt*-reset.h> and
+  <dt-bindings/reset/mt*-resets.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-infracfg
+              - mediatek,mt2712-infracfg
+              - mediatek,mt6765-infracfg
+              - mediatek,mt6795-infracfg
+              - mediatek,mt6779-infracfg_ao
+              - mediatek,mt6797-infracfg
+              - mediatek,mt7622-infracfg
+              - mediatek,mt7629-infracfg
+              - mediatek,mt7981-infracfg
+              - mediatek,mt7986-infracfg
+              - mediatek,mt8135-infracfg
+              - mediatek,mt8167-infracfg
+              - mediatek,mt8173-infracfg
+              - mediatek,mt8183-infracfg
+              - mediatek,mt8516-infracfg
+          - const: syscon
+      - items:
+          - const: mediatek,mt7623-infracfg
+          - const: mediatek,mt2701-infracfg
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - mediatek,mt2701-infracfg
+          - mediatek,mt2712-infracfg
+          - mediatek,mt6795-infracfg
+          - mediatek,mt7622-infracfg
+          - mediatek,mt7986-infracfg
+          - mediatek,mt8135-infracfg
+          - mediatek,mt8173-infracfg
+          - mediatek,mt8183-infracfg
+then:
+  required:
+    - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    infracfg: clock-controller@10001000 {
+        compatible = "mediatek,mt8173-infracfg", "syscon";
+        reg = <0x10001000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
index f9ffa5b703a5..536f5a5ebd24 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mmsys.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mmsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: MediaTek mmsys controller
 
@@ -25,24 +25,71 @@ properties:
               - mediatek,mt2712-mmsys
               - mediatek,mt6765-mmsys
               - mediatek,mt6779-mmsys
+              - mediatek,mt6795-mmsys
               - mediatek,mt6797-mmsys
               - mediatek,mt8167-mmsys
               - mediatek,mt8173-mmsys
               - mediatek,mt8183-mmsys
+              - mediatek,mt8186-mmsys
+              - mediatek,mt8188-vdosys0
               - mediatek,mt8192-mmsys
+              - mediatek,mt8195-vdosys1
+              - mediatek,mt8195-vppsys0
+              - mediatek,mt8195-vppsys1
               - mediatek,mt8365-mmsys
           - const: syscon
+
+      - description: vdosys0 and vdosys1 are 2 display HW pipelines,
+                     so mt8195 binding should be deprecated.
+        deprecated: true
+        items:
+          - const: mediatek,mt8195-mmsys
+          - const: syscon
+
       - items:
           - const: mediatek,mt7623-mmsys
           - const: mediatek,mt2701-mmsys
           - const: syscon
 
+      - items:
+          - const: mediatek,mt8195-vdosys0
+          - const: mediatek,mt8195-mmsys
+          - const: syscon
+
   reg:
     maxItems: 1
 
+  power-domains:
+    description:
+      A phandle and PM domain specifier as defined by bindings
+      of the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  mboxes:
+    description:
+      Using mailbox to communicate with GCE, it should have this
+      property and list of phandle, mailbox specifiers. See
+      Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
+      for details.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  mediatek,gce-client-reg:
+    description:
+      The register of client driver can be configured by gce with 4 arguments
+      defined in this property, such as phandle of gce, subsys id,
+      register offset and size.
+      Each subsys id is mapping to a base address of display function blocks
+      register which is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
   "#clock-cells":
     const: 1
 
+  '#reset-cells':
+    const: 1
+
 required:
   - compatible
   - reg
@@ -52,8 +99,16 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
     mmsys: syscon@14000000 {
         compatible = "mediatek,mt8173-mmsys", "syscon";
         reg = <0x14000000 0x1000>;
+        power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
         #clock-cells = <1>;
+        #reset-cells = <1>;
+        mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+                 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+        mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
     };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml
new file mode 100644
index 000000000000..d89848a8f478
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-pcie-mirror.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIE Mirror Controller for MT7622
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The mediatek PCIE mirror provides a configuration interface for PCIE
+  controller on MT7622 soc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-pcie-mirror
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      pcie_mirror: pcie-mirror@10000400 {
+        compatible = "mediatek,mt7622-pcie-mirror", "syscon";
+        reg = <0 0x10000400 0 0x10>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
new file mode 100644
index 000000000000..28ded09d72e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7622-wed.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt7622-wed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Wireless Ethernet Dispatch Controller for MT7622
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The mediatek wireless ethernet dispatch controller can be configured to
+  intercept and handle access to the WLAN DMA queues and PCIe interrupts
+  and implement hardware flow offloading from ethernet to WLAN.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-wed
+          - mediatek,mt7981-wed
+          - mediatek,mt7986-wed
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  memory-region:
+    items:
+      - description: firmware EMI region
+      - description: firmware ILM region
+      - description: firmware DLM region
+      - description: firmware CPU DATA region
+      - description: firmware BOOT region
+
+  memory-region-names:
+    items:
+      - const: wo-emi
+      - const: wo-ilm
+      - const: wo-dlm
+      - const: wo-data
+      - const: wo-boot
+
+  mediatek,wo-ccif:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: mediatek wed-wo controller interface.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7622-wed
+    then:
+      properties:
+        memory-region-names: false
+        memory-region: false
+        mediatek,wo-ccif: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      wed0: wed@1020a000 {
+        compatible = "mediatek,mt7622-wed","syscon";
+        reg = <0 0x1020a000 0 0x1000>;
+        interrupts = <GIC_SPI 214 IRQ_TYPE_LEVEL_LOW>;
+      };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      wed@15010000 {
+        compatible = "mediatek,mt7986-wed", "syscon";
+        reg = <0 0x15010000 0 0x1000>;
+        interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+
+        memory-region = <&wo_emi>, <&wo_ilm>, <&wo_dlm>,
+                        <&wo_data>, <&wo_boot>;
+        memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
+                              "wo-data", "wo-boot";
+        mediatek,wo-ccif = <&wo_ccif0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml
new file mode 100644
index 000000000000..82f64469a601
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt7986-wed-pcie.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt7986-wed-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIE WED Controller for MT7986
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The mediatek WED PCIE provides a configuration interface for PCIE
+  controller on MT7986 soc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7986-wed-pcie
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      wed_pcie: wed-pcie@10003000 {
+        compatible = "mediatek,mt7986-wed-pcie",
+                     "syscon";
+        reg = <0 0x10003000 0 0x10>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml
new file mode 100644
index 000000000000..7cd14b163abe
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8186
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8186-imp_iic_wrap
+          - mediatek,mt8186-mfgsys
+          - mediatek,mt8186-wpesys
+          - mediatek,mt8186-imgsys1
+          - mediatek,mt8186-imgsys2
+          - mediatek,mt8186-vdecsys
+          - mediatek,mt8186-vencsys
+          - mediatek,mt8186-camsys
+          - mediatek,mt8186-camsys_rawa
+          - mediatek,mt8186-camsys_rawb
+          - mediatek,mt8186-mdpsys
+          - mediatek,mt8186-ipesys
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    imp_iic_wrap: clock-controller@11017000 {
+        compatible = "mediatek,mt8186-imp_iic_wrap";
+        reg = <0x11017000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml
new file mode 100644
index 000000000000..64c769416690
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8186
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The apmixedsys provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provide the clock source to other IP blocks.
+  The infracfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+  The mcusys provides mux control to select the clock source in AP MCU.
+  The device nodes also provide the system control capacity for configuration.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8186-mcusys
+          - mediatek,mt8186-topckgen
+          - mediatek,mt8186-infracfg_ao
+          - mediatek,mt8186-apmixedsys
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: syscon@10000000 {
+        compatible = "mediatek,mt8186-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml
index c8c67c033f8c..dff4c8e8fd4b 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-clock.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-clock.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: MediaTek Functional Clock Controller for MT8192
 
@@ -24,7 +24,6 @@ properties:
           - mediatek,mt8192-imp_iic_wrap_w
           - mediatek,mt8192-imp_iic_wrap_n
           - mediatek,mt8192-msdc_top
-          - mediatek,mt8192-msdc
           - mediatek,mt8192-mfgcfg
           - mediatek,mt8192-imgsys
           - mediatek,mt8192-imgsys2
@@ -108,13 +107,6 @@ examples:
     };
 
   - |
-    msdc: clock-controller@11f60000 {
-        compatible = "mediatek,mt8192-msdc";
-        reg = <0x11f60000 0x1000>;
-        #clock-cells = <1>;
-    };
-
-  - |
     mfgcfg: clock-controller@13fbf000 {
         compatible = "mediatek,mt8192-mfgcfg";
         reg = <0x13fbf000 0x1000>;
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml
index 5705bcf1fe47..8d608fddf3f9 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8192-sys-clock.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-sys-clock.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8192-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: MediaTek System Clock Controller for MT8192
 
@@ -29,6 +29,9 @@ properties:
   '#clock-cells':
     const: 1
 
+  '#reset-cells':
+    const: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml
new file mode 100644
index 000000000000..d17164b0b13e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-clock.yaml
@@ -0,0 +1,238 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8195-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8195
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The clock architecture in Mediatek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices except apusys_pll provide clock gate control in different IP blocks.
+  The apusys_pll provides Plls which generated from SoC 26m for AI Processing Unit.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8195-scp_adsp
+          - mediatek,mt8195-imp_iic_wrap_s
+          - mediatek,mt8195-imp_iic_wrap_w
+          - mediatek,mt8195-mfgcfg
+          - mediatek,mt8195-wpesys
+          - mediatek,mt8195-wpesys_vpp0
+          - mediatek,mt8195-wpesys_vpp1
+          - mediatek,mt8195-imgsys
+          - mediatek,mt8195-imgsys1_dip_top
+          - mediatek,mt8195-imgsys1_dip_nr
+          - mediatek,mt8195-imgsys1_wpe
+          - mediatek,mt8195-ipesys
+          - mediatek,mt8195-camsys
+          - mediatek,mt8195-camsys_rawa
+          - mediatek,mt8195-camsys_yuva
+          - mediatek,mt8195-camsys_rawb
+          - mediatek,mt8195-camsys_yuvb
+          - mediatek,mt8195-camsys_mraw
+          - mediatek,mt8195-ccusys
+          - mediatek,mt8195-vdecsys_soc
+          - mediatek,mt8195-vdecsys
+          - mediatek,mt8195-vdecsys_core1
+          - mediatek,mt8195-vencsys
+          - mediatek,mt8195-vencsys_core1
+          - mediatek,mt8195-apusys_pll
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    scp_adsp: clock-controller@10720000 {
+        compatible = "mediatek,mt8195-scp_adsp";
+        reg = <0x10720000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_s: clock-controller@11d03000 {
+        compatible = "mediatek,mt8195-imp_iic_wrap_s";
+        reg = <0x11d03000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imp_iic_wrap_w: clock-controller@11e05000 {
+        compatible = "mediatek,mt8195-imp_iic_wrap_w";
+        reg = <0x11e05000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    mfgcfg: clock-controller@13fbf000 {
+        compatible = "mediatek,mt8195-mfgcfg";
+        reg = <0x13fbf000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    wpesys: clock-controller@14e00000 {
+        compatible = "mediatek,mt8195-wpesys";
+        reg = <0x14e00000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    wpesys_vpp0: clock-controller@14e02000 {
+        compatible = "mediatek,mt8195-wpesys_vpp0";
+        reg = <0x14e02000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    wpesys_vpp1: clock-controller@14e03000 {
+        compatible = "mediatek,mt8195-wpesys_vpp1";
+        reg = <0x14e03000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys: clock-controller@15000000 {
+        compatible = "mediatek,mt8195-imgsys";
+        reg = <0x15000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys1_dip_top: clock-controller@15110000 {
+        compatible = "mediatek,mt8195-imgsys1_dip_top";
+        reg = <0x15110000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys1_dip_nr: clock-controller@15130000 {
+        compatible = "mediatek,mt8195-imgsys1_dip_nr";
+        reg = <0x15130000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    imgsys1_wpe: clock-controller@15220000 {
+        compatible = "mediatek,mt8195-imgsys1_wpe";
+        reg = <0x15220000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    ipesys: clock-controller@15330000 {
+        compatible = "mediatek,mt8195-ipesys";
+        reg = <0x15330000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys: clock-controller@16000000 {
+        compatible = "mediatek,mt8195-camsys";
+        reg = <0x16000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_rawa: clock-controller@1604f000 {
+        compatible = "mediatek,mt8195-camsys_rawa";
+        reg = <0x1604f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_yuva: clock-controller@1606f000 {
+        compatible = "mediatek,mt8195-camsys_yuva";
+        reg = <0x1606f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_rawb: clock-controller@1608f000 {
+        compatible = "mediatek,mt8195-camsys_rawb";
+        reg = <0x1608f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_yuvb: clock-controller@160af000 {
+        compatible = "mediatek,mt8195-camsys_yuvb";
+        reg = <0x160af000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    camsys_mraw: clock-controller@16140000 {
+        compatible = "mediatek,mt8195-camsys_mraw";
+        reg = <0x16140000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    ccusys: clock-controller@17200000 {
+        compatible = "mediatek,mt8195-ccusys";
+        reg = <0x17200000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vdecsys_soc: clock-controller@1800f000 {
+        compatible = "mediatek,mt8195-vdecsys_soc";
+        reg = <0x1800f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vdecsys: clock-controller@1802f000 {
+        compatible = "mediatek,mt8195-vdecsys";
+        reg = <0x1802f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vdecsys_core1: clock-controller@1803f000 {
+        compatible = "mediatek,mt8195-vdecsys_core1";
+        reg = <0x1803f000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vencsys: clock-controller@1a000000 {
+        compatible = "mediatek,mt8195-vencsys";
+        reg = <0x1a000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    vencsys_core1: clock-controller@1b000000 {
+        compatible = "mediatek,mt8195-vencsys_core1";
+        reg = <0x1b000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    apusys_pll: clock-controller@190f3000 {
+        compatible = "mediatek,mt8195-apusys_pll";
+        reg = <0x190f3000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml
new file mode 100644
index 000000000000..066c9b3d6ac9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8195-sys-clock.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,mt8195-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8195
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The clock architecture in Mediatek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The apmixedsys provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provide the clock source to other IP blocks.
+  The infracfg_ao and pericfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8195-topckgen
+          - mediatek,mt8195-infracfg_ao
+          - mediatek,mt8195-apmixedsys
+          - mediatek,mt8195-pericfg_ao
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: syscon@10000000 {
+        compatible = "mediatek,mt8195-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    infracfg_ao: syscon@10001000 {
+        compatible = "mediatek,mt8195-infracfg_ao", "syscon";
+        reg = <0x10001000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    apmixedsys: syscon@1000c000 {
+        compatible = "mediatek,mt8195-apmixedsys", "syscon";
+        reg = <0x1000c000 0x1000>;
+        #clock-cells = <1>;
+    };
+
+  - |
+    pericfg_ao: syscon@11003000 {
+        compatible = "mediatek,mt8195-pericfg_ao", "syscon";
+        reg = <0x11003000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
index 8723dfe34bab..26158d0d72f3 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/mediatek/mediatek,pericfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: MediaTek Peripheral Configuration Controller
 
@@ -21,11 +21,14 @@ properties:
               - mediatek,mt2701-pericfg
               - mediatek,mt2712-pericfg
               - mediatek,mt6765-pericfg
+              - mediatek,mt6795-pericfg
               - mediatek,mt7622-pericfg
               - mediatek,mt7629-pericfg
               - mediatek,mt8135-pericfg
               - mediatek,mt8173-pericfg
               - mediatek,mt8183-pericfg
+              - mediatek,mt8186-pericfg
+              - mediatek,mt8195-pericfg
               - mediatek,mt8516-pericfg
           - const: syscon
       - items:
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
deleted file mode 100644
index 30cb645c0e54..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-MediaTek SGMIISYS controller
-============================
-
-The MediaTek SGMIISYS controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be:
-	- "mediatek,mt7622-sgmiisys", "syscon"
-	- "mediatek,mt7629-sgmiisys", "syscon"
-- #clock-cells: Must be 1
-
-The SGMIISYS controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-sgmiisys: sgmiisys@1b128000 {
-	compatible = "mediatek,mt7622-sgmiisys", "syscon";
-	reg = <0 0x1b128000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
deleted file mode 100644
index 5ce7578cf274..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Mediatek topckgen controller
-============================
-
-The Mediatek topckgen controller provides various clocks to the system.
-
-Required Properties:
-
-- compatible: Should be one of:
-	- "mediatek,mt2701-topckgen"
-	- "mediatek,mt2712-topckgen", "syscon"
-	- "mediatek,mt6765-topckgen", "syscon"
-	- "mediatek,mt6779-topckgen", "syscon"
-	- "mediatek,mt6797-topckgen"
-	- "mediatek,mt7622-topckgen"
-	- "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen"
-	- "mediatek,mt7629-topckgen"
-	- "mediatek,mt8135-topckgen"
-	- "mediatek,mt8167-topckgen", "syscon"
-	- "mediatek,mt8173-topckgen"
-	- "mediatek,mt8183-topckgen", "syscon"
-	- "mediatek,mt8516-topckgen"
-- #clock-cells: Must be 1
-
-The topckgen controller uses the common clk binding from
-Documentation/devicetree/bindings/clock/clock-bindings.txt
-The available clocks are defined in dt-bindings/clock/mt*-clk.h.
-
-Example:
-
-topckgen: power-controller@10000000 {
-	compatible = "mediatek,mt8173-topckgen";
-	reg = <0 0x10000000 0 0x1000>;
-	#clock-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
index 6193388c6318..9a0d54e9799c 100644
--- a/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
+++ b/Documentation/devicetree/bindings/arm/microchip,sparx5.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/microchip,sparx5.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip Sparx5 Boards Device Tree Bindings
+title: Microchip Sparx5 Boards
 
 maintainers:
   - Lars Povlsen <lars.povlsen@microchip.com>
diff --git a/Documentation/devicetree/bindings/arm/moxart.yaml b/Documentation/devicetree/bindings/arm/moxart.yaml
index 670d24ce8ec5..42565280914c 100644
--- a/Documentation/devicetree/bindings/arm/moxart.yaml
+++ b/Documentation/devicetree/bindings/arm/moxart.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/moxart.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MOXA ART device tree bindings
+title: MOXA ART
 
 maintainers:
   - Jonas Jensen <jonas.jensen@gmail.com>
diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
index d58116136154..4c43eaf3632e 100644
--- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
+++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/mrvl/mrvl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell Platforms Device Tree Bindings
+title: Marvell Platforms
 
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
index 6ce0b212ec6d..606b4b1b709d 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,idle-state.txt
@@ -81,4 +81,4 @@ Example:
 		};
 	};
 
-[1]. Documentation/devicetree/bindings/arm/idle-states.yaml
+[1]. Documentation/devicetree/bindings/cpu/idle-states.yaml
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
deleted file mode 100644
index 7f696362a4a1..000000000000
--- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Krait Processor Sub-system (KPSS) Application Clock Controller (ACC)
-
-The KPSS ACC provides clock, power domain, and reset control to a Krait CPU.
-There is one ACC register region per CPU within the KPSS remapped region as
-well as an alias register region that remaps accesses to the ACC associated
-with the CPU accessing the region.
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: should be one of:
-			"qcom,kpss-acc-v1"
-			"qcom,kpss-acc-v2"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the first element specifies the base address and size of
-		    the register region. An optional second element specifies
-		    the base address and size of the alias register region.
-
-- clocks:
-        Usage: required
-        Value type: <prop-encoded-array>
-        Definition: reference to the pll parents.
-
-- clock-names:
-        Usage: required
-        Value type: <stringlist>
-        Definition: must be "pll8_vote", "pxo".
-
-- clock-output-names:
-	Usage: optional
-	Value type: <string>
-	Definition: Name of the output clock. Typically acpuX_aux where X is a
-		    CPU number starting at 0.
-
-Example:
-
-	clock-controller@2088000 {
-		compatible = "qcom,kpss-acc-v2";
-		reg = <0x02088000 0x1000>,
-		      <0x02008000 0x1000>;
-		clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>;
-		clock-names = "pll8_vote", "pxo";
-		clock-output-names = "acpu0_aux";
-	};
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
deleted file mode 100644
index e628758950e1..000000000000
--- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Krait Processor Sub-system (KPSS) Global Clock Controller (GCC)
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: should be one of the following. The generic compatible
-			"qcom,kpss-gcc" should also be included.
-			"qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc"
-			"qcom,kpss-gcc-apq8064", "qcom,kpss-gcc"
-			"qcom,kpss-gcc-msm8974", "qcom,kpss-gcc"
-			"qcom,kpss-gcc-msm8960", "qcom,kpss-gcc"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: base address and size of the register region
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the pll parents.
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "pll8_vote", "pxo".
-
-- clock-output-names:
-	Usage: required
-	Value type: <string>
-	Definition: Name of the output clock. Typically acpu_l2_aux indicating
-		    an L2 cache auxiliary clock.
-
-Example:
-
-	l2cc: clock-controller@2011000 {
-		compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc";
-		reg = <0x2011000 0x1000>;
-		clocks = <&gcc PLL8_VOTE>, <&gcc PXO_SRC>;
-		clock-names = "pll8_vote", "pxo";
-		clock-output-names = "acpu_l2_aux";
-	};
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
deleted file mode 100644
index 62fcbd883392..000000000000
--- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
+++ /dev/null
@@ -1,60 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/msm/qcom,llcc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Last Level Cache Controller
-
-maintainers:
-  - Rishabh Bhatnagar <rishabhb@codeaurora.org>
-  - Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
-
-description: |
-  LLCC (Last Level Cache Controller) provides last level of cache memory in SoC,
-  that can be shared by multiple clients. Clients here are different cores in the
-  SoC, the idea is to minimize the local caches at the clients and migrate to
-  common pool of memory. Cache memory is divided into partitions called slices
-  which are assigned to clients. Clients can query the slice details, activate
-  and deactivate them.
-
-properties:
-  compatible:
-    enum:
-      - qcom,sc7180-llcc
-      - qcom,sc7280-llcc
-      - qcom,sdm845-llcc
-      - qcom,sm8150-llcc
-      - qcom,sm8250-llcc
-
-  reg:
-    items:
-      - description: LLCC base register region
-      - description: LLCC broadcast base register region
-
-  reg-names:
-    items:
-      - const: llcc_base
-      - const: llcc_broadcast_base
-
-  interrupts:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - interrupts
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-    system-cache-controller@1100000 {
-      compatible = "qcom,sdm845-llcc";
-      reg = <0x1100000 0x200000>, <0x1300000 0x50000> ;
-      reg-names = "llcc_base", "llcc_broadcast_base";
-      interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
-    };
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
index 94d50a949be1..c0e3c3a42bea 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
@@ -10,7 +10,7 @@ system, notifying them when a low power state is entered or exited.
 Multiple revisions of the SAW hardware are supported using these Device Nodes.
 SAW2 revisions differ in the register offset and configuration data. Also, the
 same revision of the SAW in different SoCs may have different configuration
-data due the the differences in hardware capabilities. Hence the SoC name, the
+data due the differences in hardware capabilities. Hence the SoC name, the
 version of the SAW hardware in that SoC and the distinction between cpu (big
 or Little) or cache, may be needed to uniquely identify the SAW register
 configuration and initialization data. The compatible string is used to
diff --git a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
index a316eef1b728..937059fcc7b3 100644
--- a/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
+++ b/Documentation/devicetree/bindings/arm/mstar/mstar.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/mstar/mstar.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MStar platforms device tree bindings
+title: MStar platforms
 
 maintainers:
   - Daniel Palmer <daniel@thingy.jp>
@@ -23,8 +23,12 @@ properties:
       - description: infinity2m boards
         items:
           - enum:
+              - 100ask,dongshanpione # 100ask DongShanPiOne
               - honestar,ssd201htv2 # Honestar SSD201_HT_V2 devkit
               - m5stack,unitv2 # M5Stack UnitV2
+              - miyoo,miyoo-mini # Miyoo Mini
+              - wirelesstag,ido-som2d01 # Wireless Tag IDO-SOM2D01
+              - wirelesstag,ido-sbc2d06-v1b-22w # Wireless Tag IDO-SBC2D06-1VB-22W
           - const: mstar,infinity2m
 
       - description: infinity3 boards
diff --git a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml b/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
index 95e51378089c..6871483947c5 100644
--- a/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
+++ b/Documentation/devicetree/bindings/arm/npcm/npcm.yaml
@@ -4,10 +4,11 @@
 $id: http://devicetree.org/schemas/arm/npcm/npcm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NPCM Platforms Device Tree Bindings
+title: NPCM Platforms
 
 maintainers:
   - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>
 
 properties:
   $nodename:
@@ -26,4 +27,10 @@ properties:
               - nuvoton,npcm750-evb         # NPCM750 evaluation board
           - const: nuvoton,npcm750
 
+      - description: NPCM845 based boards
+        items:
+          - enum:
+              - nuvoton,npcm845-evb         # NPCM845 evaluation board
+          - const: nuvoton,npcm845
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
new file mode 100644
index 000000000000..94e72f25b331
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/npcm/nuvoton,gcr.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/npcm/nuvoton,gcr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Global Control Registers block in Nuvoton SoCs
+
+maintainers:
+  - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description:
+  The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs
+  that expose misc functionality such as chip model and version information or
+  pinmux settings.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nuvoton,wpcm450-gcr
+          - nuvoton,npcm750-gcr
+          - nuvoton,npcm845-gcr
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    gcr: syscon@800000 {
+      compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd";
+      reg = <0x800000 0x1000>;
+
+      mux-controller {
+        compatible = "mmio-mux";
+        #mux-control-cells = <1>;
+        mux-reg-masks = <0x38 0x07>;
+        idle-states = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
index c9675c4cdc1b..84dc6b7512af 100644
--- a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
+++ b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/arm/nvidia,tegra194-ccplex.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/arm/nvidia,tegra194-ccplex.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NVIDIA Tegra194 CPU Complex device tree bindings
+title: NVIDIA Tegra194 CPU Complex
 
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
@@ -25,7 +25,7 @@ properties:
       - nvidia,tegra194-ccplex
 
   nvidia,bpmp:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Specifies the bpmp node that needs to be queried to get
       operating point data for all CPUs.
diff --git a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
index 214c97bc3063..f1bd6f50e726 100644
--- a/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
+++ b/Documentation/devicetree/bindings/arm/nxp/lpc32xx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/nxp/lpc32xx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP LPC32xx Platforms Device Tree Bindings
+title: NXP LPC32xx Platforms
 
 maintainers:
   - Roland Stigge <stigge@antcom.de>
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index e77635c5422c..fa8b31660cad 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -119,6 +119,9 @@ Boards (incomplete list of examples):
 - OMAP3 BeagleBoard : Low cost community board
   compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
 
+- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk
+  compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
+
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
   compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
 
diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
index 3eb6d7afff14..431ef8c56a13 100644
--- a/Documentation/devicetree/bindings/arm/omap/prcm.txt
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -31,12 +31,17 @@ Required properties:
 		(base address and length)
 - clocks:	clocks for this module
 - clockdomains:	clockdomains for this module
+- #clock-cells: From common clock binding
+- clock-output-names: From common clock binding
+
 
 Example:
 
-cm: cm@48004000 {
+cm: clock@48004000 {
 	compatible = "ti,omap3-cm";
 	reg = <0x48004000 0x4000>;
+	#clock-cells = <0>;
+	clock-output-names = "cm";
 
 	cm_clocks: clocks {
 		#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/arm/oxnas.txt b/Documentation/devicetree/bindings/arm/oxnas.txt
deleted file mode 100644
index ac64e60f99f1..000000000000
--- a/Documentation/devicetree/bindings/arm/oxnas.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Oxford Semiconductor OXNAS SoCs Family device tree bindings
--------------------------------------------
-
-Boards with the OX810SE SoC shall have the following properties:
-  Required root node property:
-    compatible: "oxsemi,ox810se"
-
-Boards with the OX820 SoC shall have the following properties:
-  Required root node property:
-    compatible: "oxsemi,ox820"
-
-Board compatible values:
-  - "wd,mbwe" (OX810SE)
-  - "cloudengines,pogoplugv3" (OX820)
diff --git a/Documentation/devicetree/bindings/arm/pmu.yaml b/Documentation/devicetree/bindings/arm/pmu.yaml
index e17ac049e890..e14358bf0b9c 100644
--- a/Documentation/devicetree/bindings/arm/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/pmu.yaml
@@ -20,6 +20,10 @@ properties:
     items:
       - enum:
           - apm,potenza-pmu
+          - apple,avalanche-pmu
+          - apple,blizzard-pmu
+          - apple,firestorm-pmu
+          - apple,icestorm-pmu
           - arm,armv8-pmuv3 # Only for s/w models
           - arm,arm1136-pmu
           - arm,arm1176-pmu
@@ -44,10 +48,18 @@ properties:
           - arm,cortex-a76-pmu
           - arm,cortex-a77-pmu
           - arm,cortex-a78-pmu
+          - arm,cortex-a510-pmu
+          - arm,cortex-a710-pmu
+          - arm,cortex-x1-pmu
+          - arm,cortex-x2-pmu
           - arm,neoverse-e1-pmu
           - arm,neoverse-n1-pmu
+          - arm,neoverse-n2-pmu
+          - arm,neoverse-v1-pmu
           - brcm,vulcan-pmu
           - cavium,thunder-pmu
+          - nvidia,denver-pmu
+          - nvidia,carmel-pmu
           - qcom,krait-pmu
           - qcom,scorpion-pmu
           - qcom,scorpion-mp-pmu
@@ -58,6 +70,8 @@ properties:
 
   interrupt-affinity:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       When using SPIs, specifies a list of phandles to CPU
       nodes corresponding directly to the affinity of
diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
index 8b77cf83a095..3a2c908ff282 100644
--- a/Documentation/devicetree/bindings/arm/psci.yaml
+++ b/Documentation/devicetree/bindings/arm/psci.yaml
@@ -43,29 +43,24 @@ properties:
 
       - description:
           For implementations complying to PSCI 0.2.
-        const: arm,psci-0.2
-
-      - description:
-          For implementations complying to PSCI 0.2.
           Function IDs are not required and should be ignored by an OS with
           PSCI 0.2 support, but are permitted to be present for compatibility
           with existing software when "arm,psci" is later in the compatible
           list.
+        minItems: 1
         items:
           - const: arm,psci-0.2
           - const: arm,psci
 
       - description:
           For implementations complying to PSCI 1.0.
-        const: arm,psci-1.0
-
-      - description:
-          For implementations complying to PSCI 1.0.
           PSCI 1.0 is backward compatible with PSCI 0.2 with minor
           specification updates, as defined in the PSCI specification[2].
+        minItems: 1
         items:
           - const: arm,psci-1.0
           - const: arm,psci-0.2
+          - const: arm,psci
 
   method:
     description: The method of calling the PSCI firmware.
@@ -101,7 +96,7 @@ properties:
       bindings in [1]) must specify this property.
 
       [1] Kernel documentation - ARM idle states bindings
-        Documentation/devicetree/bindings/arm/idle-states.yaml
+        Documentation/devicetree/bindings/cpu/idle-states.yaml
 
 patternProperties:
   "^power-domain-":
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
new file mode 100644
index 000000000000..2ec9b5b24d73
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-tpda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trace, Profiling and Diagnostics Aggregator - TPDA
+
+description: |
+  TPDAs are responsible for packetization and timestamping of data sets
+  utilizing the MIPI STPv2 packet protocol. Pulling data sets from one or
+  more attached TPDM and pushing the resultant (packetized) data out a
+  master ATB interface. Performing an arbitrated ATB interleaving (funneling)
+  task for free-flowing data from TPDM (i.e. CMB and DSB data set flows).
+
+  There is no strict binding between TPDM and TPDA. TPDA can have multiple
+  TPDMs connect to it. But There must be only one TPDA in the path from the
+  TPDM source to TMC sink. TPDM can directly connect to TPDA's inport or
+  connect to funnel which will connect to TPDA's inport.
+
+  We can use the commands are similar to the below to validate TPDMs.
+  Enable coresight sink first.
+
+  echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
+  echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source
+  echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test
+  echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test
+
+  The test data will be collected in the coresight sink which is enabled.
+  If rwp register of the sink is keeping updating when do integration_test
+  (by cat tmc_etf0/mgmt/rwp), it means there is data generated from TPDM
+  to sink.
+
+maintainers:
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Tao Zhang <quic_taozha@quicinc.com>
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,coresight-tpda
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^tpda(@[0-9a-f]+)$"
+  compatible:
+    items:
+      - const: qcom,coresight-tpda
+      - const: arm,primecell
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: apb_pclk
+
+  in-ports:
+    type: object
+    description: |
+      Input connections from TPDM to TPDA
+    $ref: /schemas/graph.yaml#/properties/ports
+
+  out-ports:
+    type: object
+    description: |
+      Output connections from the TPDA to legacy CoreSight trace bus.
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        description:
+          Output connection from the TPDA to legacy CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  # minimum tpda definition.
+  - |
+    tpda@6004000 {
+       compatible = "qcom,coresight-tpda", "arm,primecell";
+       reg = <0x6004000 0x1000>;
+
+       clocks = <&aoss_qmp>;
+       clock-names = "apb_pclk";
+
+       in-ports {
+         #address-cells = <1>;
+         #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          tpda_qdss_0_in_tpdm_dcc: endpoint {
+            remote-endpoint =
+              <&tpdm_dcc_out_tpda_qdss_0>;
+            };
+        };
+      };
+
+       out-ports {
+         port {
+                 tpda_qdss_out_funnel_in0: endpoint {
+                    remote-endpoint =
+                    <&funnel_in0_in_tpda_qdss>;
+                  };
+          };
+       };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
new file mode 100644
index 000000000000..5c08342664ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-tpdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trace, Profiling and Diagnostics Monitor - TPDM
+
+description: |
+  The TPDM or Monitor serves as data collection component for various dataset
+  types specified in the QPMDA spec. It covers Implementation defined ((ImplDef),
+  Basic Counts (BC), Tenure Counts (TC), Continuous Multi-Bit (CMB), and Discrete
+  Single Bit (DSB). It performs data collection in the data producing clock
+  domain and transfers it to the data collection time domain, generally ATB
+  clock domain.
+
+  The primary use case of the TPDM is to collect data from different data
+  sources and send it to a TPDA for packetization, timestamping, and funneling.
+
+maintainers:
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Tao Zhang <quic_taozha@quicinc.com>
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,coresight-tpdm
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^tpdm(@[0-9a-f]+)$"
+  compatible:
+    items:
+      - const: qcom,coresight-tpdm
+      - const: arm,primecell
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: apb_pclk
+
+  out-ports:
+    description: |
+      Output connections from the TPDM to coresight funnel/TPDA.
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        description: Output connection from the TPDM to coresight
+            funnel/TPDA.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # minimum TPDM definition. TPDM connect to coresight TPDA.
+  - |
+    tpdm@684c000 {
+      compatible = "qcom,coresight-tpdm", "arm,primecell";
+      reg = <0x0684c000 0x1000>;
+
+      clocks = <&aoss_qmp>;
+      clock-names = "apb_pclk";
+
+      out-ports {
+        port {
+          tpdm_prng_out_tpda_qdss: endpoint {
+            remote-endpoint =
+              <&tpda_qdss_in_tpdm_prng>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml
new file mode 100644
index 000000000000..e333ec4a9c5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC compatibles naming convention
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Guidelines for new compatibles for SoC blocks/components.
+  When adding new compatibles in new bindings, use the format::
+    qcom,SoC-IP
+
+  For example::
+   qcom,sdm845-llcc-bwmon
+
+  When adding new compatibles to existing bindings, use the format in the
+  existing binding, even if it contradicts the above.
+
+select:
+  properties:
+    compatible:
+      pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      # Preferred naming style for compatibles of SoC components:
+      - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+-.*$"
+      - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$"
+
+      # Legacy namings - variations of existing patterns/compatibles are OK,
+      # but do not add completely new entries to these:
+      - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$"
+      - enum:
+          - qcom,dsi-ctrl-6g-qcm2290
+          - qcom,gpucc-sdm630
+          - qcom,gpucc-sdm660
+          - qcom,lcc-apq8064
+          - qcom,lcc-ipq8064
+          - qcom,lcc-mdm9615
+          - qcom,lcc-msm8960
+          - qcom,lpass-cpu-apq8016
+          - qcom,usb-ss-ipq4019-phy
+          - qcom,usb-hs-ipq4019-phy
+          - qcom,vqmmc-ipq4019-regulator
+
+      # Legacy compatibles with wild-cards - list cannot grow with new bindings:
+      - enum:
+          - qcom,ipq806x-gmac
+          - qcom,ipq806x-nand
+          - qcom,ipq806x-sata-phy
+          - qcom,ipq806x-usb-phy-ss
+          - qcom,ipq806x-usb-phy-hs
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 880ddafc634e..d9dd25695c3d 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/arm/qcom.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: QCOM device tree bindings
+title: QCOM
 
 maintainers:
-  - Stephen Boyd <sboyd@codeaurora.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
   Some qcom based bootloaders identify the dtb blob based on a set of
@@ -25,32 +25,69 @@ description: |
   The 'SoC' element must be one of the following strings:
 
         apq8016
+        apq8026
         apq8074
         apq8084
         apq8096
+        ipq4018
+        ipq5332
         ipq6018
         ipq8074
+        ipq9574
         mdm9615
         msm8226
         msm8916
+        msm8939
+        msm8953
+        msm8956
         msm8974
+        msm8976
         msm8992
         msm8994
         msm8996
+        msm8998
+        qcs404
+        qcm2290
+        qdu1000
+        qrb2210
+        qrb4210
+        qru1000
         sa8155p
+        sa8540p
+        sa8775p
         sc7180
         sc7280
+        sc8180x
+        sc8280xp
+        sda660
+        sdm450
         sdm630
+        sdm632
+        sdm636
         sdm660
+        sdm670
         sdm845
         sdx55
+        sdx65
+        sm4250
+        sm6115
+        sm6115p
+        sm6125
+        sm6350
+        sm6375
+        sm7225
         sm8150
         sm8250
         sm8350
+        sm8450
+        sm8550
 
   The 'board' element must be one of the following strings:
 
         adp
+        ap-al02-c7
+        ap-mi01.2
+        ap-mi01.6
         cdp
         cp01-c1
         dragonboard
@@ -61,7 +98,10 @@ description: |
         liquid
         mtp
         qrd
+        rb2
+        ride
         sbc
+        x100
 
   The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
   where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
@@ -82,6 +122,11 @@ description: |
   A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in
   foundry 2.
 
+  There are many devices in the list below that run the standard ChromeOS
+  bootloader setup and use the open source depthcharge bootloader to boot the
+  OS. These devices do not use the scheme described above. For details, see:
+  https://docs.kernel.org/arm/google/chromebook-boot-flow.html
+
 properties:
   $nodename:
     const: "/"
@@ -94,6 +139,17 @@ properties:
 
       - items:
           - enum:
+              - asus,sparrow
+              - huawei,sturgeon
+              - lg,lenok
+              - samsung,matisse-wifi
+          - const: qcom,apq8026
+
+      - items:
+          - enum:
+              - asus,nexus7-flo
+              - lg,nexus4-mako
+              - sony,xperia-yuga
               - qcom,apq8064-cm-qs600
               - qcom,apq8064-ifc6410
           - const: qcom,apq8064
@@ -122,47 +178,152 @@ properties:
 
       - items:
           - enum:
+              - sony,kanuti-tulip
+              - square,apq8039-t2
+          - const: qcom,msm8939
+
+      - items:
+          - enum:
+              - sony,kugo-row
+              - sony,suzu-row
+          - const: qcom,msm8956
+
+      - items:
+          - enum:
               - qcom,msm8960-cdp
           - const: qcom,msm8960
 
       - items:
           - enum:
-              - fairphone,fp2
               - lge,hammerhead
               - sony,xperia-amami
-              - sony,xperia-castor
               - sony,xperia-honami
           - const: qcom,msm8974
 
       - items:
           - enum:
-              - alcatel,idol347
-          - const: qcom,msm8916-mtp/1
+              - fairphone,fp2
+              - oneplus,bacon
+              - samsung,klte
+              - sony,xperia-castor
+          - const: qcom,msm8974pro
+          - const: qcom,msm8974
+
+      - items:
           - const: qcom,msm8916-mtp
+          - const: qcom,msm8916-mtp/1
           - const: qcom,msm8916
 
       - items:
           - enum:
-              - longcheer,l8150
+              - acer,a1-724
+              - alcatel,idol347
+              - asus,z00l
+              - gplus,fl8005a
+              - huawei,g7
+              - longcheer,l8910
               - samsung,a3u-eur
               - samsung,a5u-eur
+              - samsung,e5
+              - samsung,e7
+              - samsung,grandmax
+              - samsung,gt510
+              - samsung,gt58
+              - samsung,j5
+              - samsung,j5x
+              - samsung,serranove
+              - thwc,uf896
+              - thwc,ufi001c
+              - wingtech,wt88047
+              - yiming,uz801-v3
           - const: qcom,msm8916
 
       - items:
+          - const: longcheer,l8150
+          - const: qcom,msm8916-v1-qrd/9-v1
+          - const: qcom,msm8916
+
+      - items:
+          - enum:
+              - motorola,potter
+              - xiaomi,daisy
+              - xiaomi,mido
+              - xiaomi,tissot
+              - xiaomi,vince
+          - const: qcom,msm8953
+
+      - items:
+          - enum:
+              - lg,bullhead
+              - microsoft,talkman
+              - xiaomi,libra
+          - const: qcom,msm8992
+
+      - items:
           - enum:
               - sony,karin_windy
+          - const: qcom,apq8094
+
+      - items:
+          - enum:
+              - huawei,angler
+              - microsoft,cityman
+              - sony,ivy-row
               - sony,karin-row
               - sony,satsuki-row
               - sony,sumire-row
               - sony,suzuran-row
-              - qcom,msm8994
-          - const: qcom,apq8094
+          - const: qcom,msm8994
 
       - items:
-          - const: qcom,msm8996-mtp
+          - enum:
+              - arrow,apq8096-db820c
+              - inforce,ifc6640
+          - const: qcom,apq8096-sbc
+          - const: qcom,apq8096
 
       - items:
           - enum:
+              - oneplus,oneplus3
+              - oneplus,oneplus3t
+              - qcom,msm8996-mtp
+              - sony,dora-row
+              - sony,kagura-row
+              - sony,keyaki-row
+              - xiaomi,gemini
+          - const: qcom,msm8996
+
+      - items:
+          - enum:
+              - xiaomi,natrium
+              - xiaomi,scorpio
+          - const: qcom,msm8996pro
+          - const: qcom,msm8996
+
+      - items:
+          - enum:
+              - asus,novago-tp370ql
+              - fxtec,pro1
+              - hp,envy-x2
+              - lenovo,miix-630
+              - oneplus,cheeseburger
+              - oneplus,dumpling
+              - qcom,msm8998-mtp
+              - sony,xperia-lilac
+              - sony,xperia-maple
+              - sony,xperia-poplar
+              - xiaomi,sagit
+          - const: qcom,msm8998
+
+      - items:
+          - enum:
+              - 8dev,jalapeno
+              - alfa-network,ap120c-ac
+          - const: qcom,ipq4018
+
+      - items:
+          - enum:
+              - qcom,ipq4019-ap-dk01.1-c1
               - qcom,ipq4019-ap-dk04.1-c3
               - qcom,ipq4019-ap-dk07.1-c1
               - qcom,ipq4019-ap-dk07.1-c2
@@ -171,6 +332,13 @@ properties:
 
       - items:
           - enum:
+              - qcom,ipq5332-ap-mi01.2
+              - qcom,ipq5332-ap-mi01.6
+          - const: qcom,ipq5332
+
+      - items:
+          - enum:
+              - mikrotik,rb3011
               - qcom,ipq8064-ap148
           - const: qcom,ipq8064
 
@@ -183,16 +351,451 @@ properties:
 
       - items:
           - enum:
+              - qcom,ipq9574-ap-al02-c7
+          - const: qcom,ipq9574
+
+      - description: Sierra Wireless MangOH Green with WP8548 Module
+        items:
+          - const: swir,mangoh-green-wp8548
+          - const: swir,wp8548
+          - const: qcom,mdm9615
+
+      - description: Qualcomm Technologies, Inc. Robotics RB1
+        items:
+          - enum:
+              - qcom,qrb2210-rb1
+          - const: qcom,qrb2210
+          - const: qcom,qcm2290
+
+      - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform
+        items:
+          - enum:
+              - qcom,qdu1000-idp
+              - qcom,qdu1000-x100
+          - const: qcom,qdu1000
+
+      - description: Qualcomm Technologies, Inc. Radio Unit 1000 platform
+        items:
+          - enum:
+              - qcom,qru1000-idp
+          - const: qcom,qru1000
+
+      - description: Qualcomm Technologies, Inc. SC7180 IDP
+        items:
+          - enum:
               - qcom,sc7180-idp
           - const: qcom,sc7180
 
+      - description: HP Chromebook x2 11c (rev1 - 2)
+        items:
+          - const: google,coachz-rev1
+          - const: google,coachz-rev2
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c (newest rev)
+        items:
+          - const: google,coachz
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c with LTE (rev1 - 2)
+        items:
+          - const: google,coachz-rev1-sku0
+          - const: google,coachz-rev2-sku0
+          - const: qcom,sc7180
+
+      - description: HP Chromebook x2 11c with LTE (newest rev)
+        items:
+          - const: google,coachz-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo Chromebook Duet 5 13 (rev2)
+        items:
+          - const: google,homestar-rev2
+          - const: google,homestar-rev23
+          - const: qcom,sc7180
+
+      - description: Lenovo Chromebook Duet 5 13 (rev3)
+        items:
+          - const: google,homestar-rev3
+          - const: qcom,sc7180
+
+      - description: Lenovo Chromebook Duet 5 13 (newest rev)
+        items:
+          - const: google,homestar
+          - const: qcom,sc7180
+
+      - description: Google Kingoftown (rev0)
+        items:
+          - const: google,kingoftown-rev0
+          - const: qcom,sc7180
+
+      - description: Google Kingoftown (newest rev)
+        items:
+          - const: google,kingoftown
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev0)
+        items:
+          - const: google,lazor-rev0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev1 - 2)
+        items:
+          - const: google,lazor-rev1
+          - const: google,lazor-rev2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (rev3 - 8)
+        items:
+          - const: google,lazor-rev3
+          - const: google,lazor-rev4
+          - const: google,lazor-rev5
+          - const: google,lazor-rev6
+          - const: google,lazor-rev7
+          - const: google,lazor-rev8
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 (newest rev)
+        items:
+          - const: google,lazor
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (rev1 - 2)
+        items:
+          - const: google,lazor-rev1-sku2
+          - const: google,lazor-rev2-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (rev3 - 8)
+        items:
+          - const: google,lazor-rev3-sku2
+          - const: google,lazor-rev4-sku2
+          - const: google,lazor-rev5-sku2
+          - const: google,lazor-rev6-sku2
+          - const: google,lazor-rev7-sku2
+          - const: google,lazor-rev8-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with KB Backlight (newest rev)
+        items:
+          - const: google,lazor-sku2
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (rev1 - 2)
+        items:
+          - const: google,lazor-rev1-sku0
+          - const: google,lazor-rev2-sku0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (rev3 - 8)
+        items:
+          - const: google,lazor-rev3-sku0
+          - const: google,lazor-rev4-sku0
+          - const: google,lazor-rev5-sku0
+          - const: google,lazor-rev6-sku0
+          - const: google,lazor-rev7-sku0
+          - const: google,lazor-rev8-sku0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook Spin 513 with LTE (newest rev)
+        items:
+          - const: google,lazor-sku0
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 (rev4 - rev8)
+        items:
+          - const: google,lazor-rev4-sku4
+          - const: google,lazor-rev5-sku4
+          - const: google,lazor-rev6-sku4
+          - const: google,lazor-rev7-sku4
+          - const: google,lazor-rev8-sku4
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 (newest rev)
+        items:
+          - const: google,lazor-sku4
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (rev4)
+        items:
+          - const: google,lazor-rev4-sku5
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (rev5 - rev8)
+        items:
+          - const: google,lazor-rev5-sku5
+          - const: google,lazor-rev5-sku6
+          - const: google,lazor-rev6-sku6
+          - const: google,lazor-rev7-sku6
+          - const: google,lazor-rev8-sku6
+          - const: qcom,sc7180
+
+      - description: Acer Chromebook 511 without Touchscreen (newest rev)
+        items:
+          - const: google,lazor-sku6
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with AUO panel (rev0)
+        items:
+          - const: google,mrbland-rev0-sku0
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with AUO panel (newest rev)
+        items:
+          - const: google,mrbland-sku1536
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with BOE panel (rev0)
+        items:
+          - const: google,mrbland-rev0-sku16
+          - const: qcom,sc7180
+
+      - description: Google Mrbland with BOE panel (newest rev)
+        items:
+          - const: google,mrbland-sku1024
+          - const: google,mrbland-sku768
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with Parade (newest rev)
+        items:
+          - const: google,pazquel-sku5
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with TI (newest rev)
+        items:
+          - const: google,pazquel-sku1
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with LTE and Parade (newest rev)
+        items:
+          - const: google,pazquel-sku6
+          - const: google,pazquel-sku4
+          - const: qcom,sc7180
+
+      - description: Google Pazquel with LTE and TI (newest rev)
+        items:
+          - const: google,pazquel-sku0
+          - const: google,pazquel-sku2
+          - const: qcom,sc7180
+
+      - description: Google Pazquel360 with LTE (newest rev)
+        items:
+          - const: google,pazquel-sku22
+          - const: google,pazquel-sku20
+          - const: qcom,sc7180
+
+      - description: Google Pazquel360 with WiFi (newest rev)
+        items:
+          - const: google,pazquel-sku21
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 (rev1)
+        items:
+          - const: google,pompom-rev1
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 (rev2)
+        items:
+          - const: google,pompom-rev2
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 (newest rev)
+        items:
+          - const: google,pompom
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 with LTE (rev1)
+        items:
+          - const: google,pompom-rev1-sku0
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 with LTE (rev2)
+        items:
+          - const: google,pompom-rev2-sku0
+          - const: qcom,sc7180
+
+      - description: Sharp Dynabook Chromebook C1 with LTE (newest rev)
+        items:
+          - const: google,pompom-sku0
+          - const: qcom,sc7180
+
+      - description: Google Quackingstick (newest rev)
+        items:
+          - const: google,quackingstick-sku1537
+          - const: qcom,sc7180
+
+      - description: Google Quackingstick with LTE (newest rev)
+        items:
+          - const: google,quackingstick-sku1536
+          - const: qcom,sc7180
+
+      - description: Google Trogdor (newest rev)
+        items:
+          - const: google,trogdor
+          - const: qcom,sc7180
+
+      - description: Google Trogdor with LTE (newest rev)
+        items:
+          - const: google,trogdor-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (rev0)
+        items:
+          - const: google,wormdingler-rev0-sku16
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel (newest rev)
+        items:
+          - const: google,wormdingler-sku1024
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with BOE panel and rt5682s (newest rev)
+        items:
+          - const: google,wormdingler-sku1025
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (rev0)
+        items:
+          - const: google,wormdingler-rev0-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel (newest rev)
+        items:
+          - const: google,wormdingler-sku0
+          - const: qcom,sc7180
+
+      - description: Lenovo IdeaPad Chromebook Duet 3 with INX panel and rt5682s (newest rev)
+        items:
+          - const: google,wormdingler-sku1
+          - const: qcom,sc7180
+
+      - description: Qualcomm Technologies, Inc. sc7280 CRD platform (rev3 - 4)
+        items:
+          - const: qcom,sc7280-crd
+          - const: google,hoglin-rev3
+          - const: google,hoglin-rev4
+          - const: google,piglin-rev3
+          - const: google,piglin-rev4
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 CRD platform (newest rev)
+        items:
+          - const: google,zoglin
+          - const: google,hoglin
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 CRD Pro platform (newest rev)
+        items:
+          - const: google,zoglin-sku1536
+          - const: google,hoglin-sku1536
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 IDP SKU1 platform
+        items:
+          - const: qcom,sc7280-idp
+          - const: google,senor
+          - const: qcom,sc7280
+
+      - description: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform
+        items:
+          - const: qcom,sc7280-idp2
+          - const: google,piglin
+          - const: qcom,sc7280
+
+      - description: Google Evoker (newest rev)
+        items:
+          - const: google,evoker
+          - const: qcom,sc7280
+
+      - description: Google Evoker with LTE (newest rev)
+        items:
+          - const: google,evoker-sku512
+          - const: qcom,sc7280
+
+      - description: Google Herobrine (newest rev)
+        items:
+          - const: google,herobrine
+          - const: qcom,sc7280
+
+      - description: Google Villager (rev0)
+        items:
+          - const: google,villager-rev0
+          - const: qcom,sc7280
+
+      - description: Google Villager (newest rev)
+        items:
+          - const: google,villager
+          - const: qcom,sc7280
+
+      - description: Google Villager with LTE (newest rev)
+        items:
+          - const: google,villager-sku512
+          - const: qcom,sc7280
+
+      - description: Google Zombie (newest rev)
+        items:
+          - const: google,zombie
+          - const: qcom,sc7280
+
+      - description: Google Zombie with LTE (newest rev)
+        items:
+          - const: google,zombie-sku512
+          - const: qcom,sc7280
+
+      - description: Google Zombie with NVMe (newest rev)
+        items:
+          - const: google,zombie-sku2
+          - const: google,zombie-sku3
+          - const: google,zombie-sku515
+          - const: qcom,sc7280
+
+      - description: Google Zombie with LTE and NVMe (newest rev)
+        items:
+          - const: google,zombie-sku514
+          - const: qcom,sc7280
+
       - items:
           - enum:
-              - qcom,sc7280-idp
-              - qcom,sc7280-idp2
-              - google,piglin
-              - google,senor
-          - const: qcom,sc7280
+              - lenovo,flex-5g
+              - microsoft,surface-prox
+              - qcom,sc8180x-primus
+          - const: qcom,sc8180x
+
+      - items:
+          - enum:
+              - lenovo,thinkpad-x13s
+              - qcom,sc8280xp-crd
+              - qcom,sc8280xp-qrd
+          - const: qcom,sc8280xp
+
+      - items:
+          - enum:
+              - motorola,ali
+          - const: qcom,sdm450
+
+      - items:
+          - enum:
+              - sony,discovery-row
+              - sony,kirin-row
+              - sony,pioneer-row
+              - sony,voyager-row
+          - const: qcom,sdm630
+
+      - items:
+          - enum:
+              - inforce,ifc6560
+          - const: qcom,sda660
+
+      - items:
+          - enum:
+              - fairphone,fp3
+              - motorola,ocean
+          - const: qcom,sdm632
+
+      - items:
+          - enum:
+              - sony,mermaid-row
+          - const: qcom,sdm636
 
       - items:
           - enum:
@@ -201,6 +804,11 @@ properties:
 
       - items:
           - enum:
+              - google,sargo
+          - const: qcom,sdm670
+
+      - items:
+          - enum:
               - qcom,sdx55-mtp
               - qcom,sdx55-telit-fn980-tlb
               - qcom,sdx55-t55
@@ -208,32 +816,270 @@ properties:
 
       - items:
           - enum:
+              - qcom,sdx65-mtp
+          - const: qcom,sdx65
+
+      - items:
+          - enum:
               - qcom,ipq6018-cp01
               - qcom,ipq6018-cp01-c1
           - const: qcom,ipq6018
 
       - items:
           - enum:
+              - qcom,qcs404-evb-1000
+              - qcom,qcs404-evb-4000
+          - const: qcom,qcs404-evb
+          - const: qcom,qcs404
+
+      - items:
+          - enum:
               - qcom,sa8155p-adp
           - const: qcom,sa8155p
 
       - items:
           - enum:
+              - qcom,sa8295p-adp
+              - qcom,sa8540p-ride
+          - const: qcom,sa8540p
+
+      - items:
+          - enum:
+              - qcom,sa8775p-ride
+          - const: qcom,sa8775p
+
+      - items:
+          - enum:
+              - google,cheza
+              - google,cheza-rev1
+              - google,cheza-rev2
+              - lenovo,yoga-c630
+              - lg,judyln
+              - lg,judyp
+              - oneplus,enchilada
+              - oneplus,fajita
+              - qcom,sdm845-mtp
+              - shift,axolotl
+              - samsung,starqltechn
+              - samsung,w737
+              - sony,akari-row
+              - sony,akatsuki-row
+              - sony,apollo-row
+              - thundercomm,db845c
+              - xiaomi,beryllium
+              - xiaomi,beryllium-ebbg
+              - xiaomi,polaris
+          - const: qcom,sdm845
+
+      - items:
+          - enum:
+              - oneplus,billie2
+          - const: qcom,sm4250
+
+      - items:
+          - enum:
+              - qcom,qrb4210-rb2
+          - const: qcom,qrb4210
+          - const: qcom,sm4250
+
+      - items:
+          - enum:
+              - lenovo,j606f
+          - const: qcom,sm6115p
+          - const: qcom,sm6115
+
+      - items:
+          - enum:
+              - sony,pdx201
+              - xiaomi,laurel-sprout
+          - const: qcom,sm6125
+
+      - items:
+          - enum:
+              - sony,pdx213
+          - const: qcom,sm6350
+
+      - items:
+          - enum:
+              - sony,pdx225
+          - const: qcom,sm6375
+
+      - items:
+          - enum:
+              - fairphone,fp4
+          - const: qcom,sm7225
+
+      - items:
+          - enum:
+              - microsoft,surface-duo
+              - qcom,sm8150-hdk
               - qcom,sm8150-mtp
+              - sony,bahamut-generic
+              - sony,griffin-generic
           - const: qcom,sm8150
 
       - items:
           - enum:
               - qcom,qrb5165-rb5
+              - qcom,sm8250-hdk
               - qcom,sm8250-mtp
+              - sony,pdx203-generic
+              - sony,pdx206-generic
+              - xiaomi,elish
           - const: qcom,sm8250
 
       - items:
           - enum:
+              - microsoft,surface-duo2
               - qcom,sm8350-hdk
               - qcom,sm8350-mtp
+              - sony,pdx214-generic
+              - sony,pdx215-generic
           - const: qcom,sm8350
 
+      - items:
+          - enum:
+              - qcom,sm8450-hdk
+              - qcom,sm8450-qrd
+              - sony,pdx223
+              - sony,pdx224
+          - const: qcom,sm8450
+
+      - items:
+          - enum:
+              - qcom,sm8550-mtp
+              - qcom,sm8550-qrd
+          - const: qcom,sm8550
+
+  # Board compatibles go above
+
+  qcom,msm-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 8
+    items:
+      items:
+        - description: |
+            MSM chipset ID - an exact match value consisting of two bitfields::
+             - bits 0-15  - The unique MSM chipset ID
+             - bits 16-31 - Reserved; should be 0
+        - description: |
+            Hardware revision ID - a chipset specific 32-bit ID representing
+            the version of the chipset.  It is best a match value - the
+            bootloader will look for the closest possible match.
+    deprecated: true
+    description:
+      The MSM chipset and hardware revision used Qualcomm bootloaders.  It
+      can optionally be an array of these to indicate multiple hardware that
+      use the same device tree.  It is expected that the bootloader will use
+      this information at boot-up to decide which device tree to use when given
+      multiple device trees, some of which may not be compatible with the
+      actual hardware.  It is the bootloader's responsibility to pass the
+      correct device tree to the kernel.
+      The property is deprecated.
+
+  qcom,board-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 8
+    oneOf:
+      - items:
+          - items:
+              - description: |
+                  Board ID consisting of three bitfields::
+                    - bits 31-24 - Unused
+                    - bits 23-16 - Platform Version Major
+                    - bits 15-8  - Platform Version Minor
+                    - bits 7-0   - Platform Type
+                  Platform Type field is an exact match value.  The
+                  Platform Major/Minor field is a best match.  The bootloader will
+                  look for the closest possible match.
+              - description: |
+                  Subtype ID unique to a Platform Type/Chipset ID.  For a given
+                  Platform Type, there will typically only be a single board and the
+                  subtype_id will be 0.  However in some cases board variants may
+                  need to be distinguished by different subtype_id values.
+      - items:
+          # OnePlus uses a variant of board-id with four elements:
+          - items:
+              - const: 8
+              - const: 0
+              - description: OnePlus board ID
+              - description: OnePlus subtype ID
+    deprecated: true
+    description:
+      The board type and revision information.  It can optionally be an array
+      of these to indicate multiple boards that use the same device tree.  It
+      is expected that the bootloader will use this information at boot-up to
+      decide which device tree to use when given multiple device trees, some of
+      which may not be compatible with the actual hardware.  It is the
+      bootloader's responsibility to pass the correct device tree to the
+      kernel
+      The property is deprecated.
+
+allOf:
+  # Explicit allow-list for older SoCs. The legacy properties are not allowed
+  # on newer SoCs.
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,apq8026
+              - qcom,apq8094
+              - qcom,apq8096
+              - qcom,msm8939
+              - qcom,msm8953
+              - qcom,msm8956
+              - qcom,msm8992
+              - qcom,msm8994
+              - qcom,msm8996
+              - qcom,msm8998
+              - qcom,sdm450
+              - qcom,sdm630
+              - qcom,sdm632
+              - qcom,sdm636
+              - qcom,sdm845
+              - qcom,sdx55
+              - qcom,sdx65
+              - qcom,sm4250
+              - qcom,sm6115
+              - qcom,sm6125
+              - qcom,sm6350
+              - qcom,sm7225
+              - qcom,sm8150
+              - qcom,sm8250
+    then:
+      properties:
+        qcom,board-id: true
+        qcom,msm-id: true
+    else:
+      properties:
+        qcom,board-id: false
+        qcom,msm-id: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - oneplus,cheeseburger
+              - oneplus,dumpling
+              - oneplus,enchilada
+              - oneplus,fajita
+              - oneplus,oneplus3
+              - oneplus,oneplus3t
+    then:
+      properties:
+        qcom,board-id:
+          items:
+            minItems: 4
+    else:
+      properties:
+        qcom,board-id:
+          items:
+            maxItems: 2
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/rda.yaml b/Documentation/devicetree/bindings/arm/rda.yaml
index a5c0444aa2b4..09241ea1d228 100644
--- a/Documentation/devicetree/bindings/arm/rda.yaml
+++ b/Documentation/devicetree/bindings/arm/rda.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/rda.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: RDA Micro platforms device tree bindings
+title: RDA Micro platforms
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/realtek.yaml b/Documentation/devicetree/bindings/arm/realtek.yaml
index 9fb0297fe1ce..ddd9a85099e9 100644
--- a/Documentation/devicetree/bindings/arm/realtek.yaml
+++ b/Documentation/devicetree/bindings/arm/realtek.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/realtek.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Realtek platforms device tree bindings
+title: Realtek platforms
 
 maintainers:
   - Andreas Färber <afaerber@suse.de>
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
deleted file mode 100644
index 8a11918866b8..000000000000
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ /dev/null
@@ -1,353 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/renesas.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Renesas SH-Mobile, R-Mobile, and R-Car Platform Device Tree Bindings
-
-maintainers:
-  - Geert Uytterhoeven <geert+renesas@glider.be>
-
-properties:
-  $nodename:
-    const: '/'
-  compatible:
-    oneOf:
-      - description: Emma Mobile EV2
-        items:
-          - enum:
-              - renesas,kzm9d # Kyoto Microcomputer Co. KZM-A9-Dual
-          - const: renesas,emev2
-
-      - description: RZ/A1H (R7S72100)
-        items:
-          - enum:
-              - renesas,genmai # Genmai (RTK772100BC00000BR)
-              - renesas,gr-peach # GR-Peach (X28A-M01-E/F)
-              - renesas,rskrza1 # RSKRZA1 (YR0K77210C000BE)
-          - const: renesas,r7s72100
-
-      - description: RZ/A2 (R7S9210)
-        items:
-          - enum:
-              - renesas,rza2mevb # RZ/A2M Eval Board (RTK7921053S00000BE)
-          - const: renesas,r7s9210
-
-      - description: SH-Mobile AG5 (R8A73A00/SH73A0)
-        items:
-          - enum:
-              - renesas,kzm9g # Kyoto Microcomputer Co. KZM-A9-GT
-          - const: renesas,sh73a0
-
-      - description: R-Mobile APE6 (R8A73A40)
-        items:
-          - enum:
-              - renesas,ape6evm
-          - const: renesas,r8a73a4
-
-      - description: R-Mobile A1 (R8A77400)
-        items:
-          - enum:
-              - renesas,armadillo800eva # Atmark Techno Armadillo-800 EVA
-          - const: renesas,r8a7740
-
-      - description: RZ/G1H (R8A77420)
-        items:
-          - enum:
-              # iWave Systems RZ/G1H Qseven System On Module (iW-RainboW-G21M-Qseven)
-              - iwave,g21m
-          - const: renesas,r8a7742
-
-      - items:
-          - enum:
-              # iWave Systems RZ/G1H Qseven Development Platform (iW-RainboW-G21D-Qseven)
-              - iwave,g21d
-          - const: iwave,g21m
-          - const: renesas,r8a7742
-
-      - description: RZ/G1M (R8A77430)
-        items:
-          - enum:
-              # iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven)
-              - iwave,g20d
-          - const: iwave,g20m
-          - const: renesas,r8a7743
-
-      - items:
-          - enum:
-              # iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven)
-              - iwave,g20m
-              - renesas,sk-rzg1m # SK-RZG1M (YR8A77430S000BE)
-          - const: renesas,r8a7743
-
-      - description: RZ/G1N (R8A77440)
-        items:
-          - enum:
-              # iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven)
-              - iwave,g20d
-          - const: iwave,g20m
-          - const: renesas,r8a7744
-
-      - items:
-          - enum:
-              # iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven)
-              - iwave,g20m
-          - const: renesas,r8a7744
-
-      - description: RZ/G1E (R8A77450)
-        items:
-          - enum:
-              - iwave,g22m # iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM)
-              - renesas,sk-rzg1e # SK-RZG1E (YR8A77450S000BE)
-          - const: renesas,r8a7745
-
-      - description: iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D)
-        items:
-          - const: iwave,g22d
-          - const: iwave,g22m
-          - const: renesas,r8a7745
-
-      - description: RZ/G1C (R8A77470)
-        items:
-          - enum:
-              - iwave,g23s #iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S)
-          - const: renesas,r8a77470
-
-      - description: RZ/G2M (R8A774A1)
-        items:
-          - enum:
-              - hoperun,hihope-rzg2m # HopeRun HiHope RZ/G2M platform
-              - beacon,beacon-rzg2m # Beacon EmbeddedWorks RZ/G2M Kit
-          - const: renesas,r8a774a1
-
-      - items:
-          - enum:
-              - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms
-          - const: hoperun,hihope-rzg2m
-          - const: renesas,r8a774a1
-
-      - description: RZ/G2N (R8A774B1)
-        items:
-          - enum:
-              - beacon,beacon-rzg2n # Beacon EmbeddedWorks RZ/G2N Kit
-              - hoperun,hihope-rzg2n # HopeRun HiHope RZ/G2N platform
-          - const: renesas,r8a774b1
-
-      - items:
-          - enum:
-              - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms
-          - const: hoperun,hihope-rzg2n
-          - const: renesas,r8a774b1
-
-      - description: RZ/G2E (R8A774C0)
-        items:
-          - enum:
-              - si-linux,cat874 # Silicon Linux RZ/G2E 96board platform (CAT874)
-          - const: renesas,r8a774c0
-
-      - items:
-          - enum:
-              - si-linux,cat875 # Silicon Linux sub board for CAT874 (CAT875)
-          - const: si-linux,cat874
-          - const: renesas,r8a774c0
-
-      - description: RZ/G2H (R8A774E1)
-        items:
-          - enum:
-              - beacon,beacon-rzg2h # Beacon EmbeddedWorks RZ/G2H Kit
-              - hoperun,hihope-rzg2h # HopeRun HiHope RZ/G2H platform
-          - const: renesas,r8a774e1
-
-      - items:
-          - enum:
-              - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms
-          - const: hoperun,hihope-rzg2h
-          - const: renesas,r8a774e1
-
-      - description: R-Car M1A (R8A77781)
-        items:
-          - enum:
-              - renesas,bockw
-          - const: renesas,r8a7778
-
-      - description: R-Car H1 (R8A77790)
-        items:
-          - enum:
-              - renesas,marzen # Marzen (R0P7779A00010S)
-          - const: renesas,r8a7779
-
-      - description: R-Car H2 (R8A77900)
-        items:
-          - enum:
-              - renesas,lager # Lager (RTP0RC7790SEB00010S)
-              - renesas,stout # Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD)
-          - const: renesas,r8a7790
-
-      - description: R-Car M2-W (R8A77910)
-        items:
-          - enum:
-              - renesas,henninger
-              - renesas,koelsch # Koelsch (RTP0RC7791SEB00010S)
-              - renesas,porter # Porter (M2-LCDP)
-          - const: renesas,r8a7791
-
-      - description: R-Car V2H (R8A77920)
-        items:
-          - enum:
-              - renesas,blanche # Blanche (RTP0RC7792SEB00010S)
-              - renesas,wheat # Wheat (RTP0RC7792ASKB0000JE)
-          - const: renesas,r8a7792
-
-      - description: R-Car M2-N (R8A77930)
-        items:
-          - enum:
-              - renesas,gose # Gose (RTP0RC7793SEB00010S)
-          - const: renesas,r8a7793
-
-      - description: R-Car E2 (R8A77940)
-        items:
-          - enum:
-              - renesas,alt # Alt (RTP0RC7794SEB00010S)
-              - renesas,silk # SILK (RTP0RC7794LCB00011S)
-          - const: renesas,r8a7794
-
-      - description: R-Car H3 (R8A77950)
-        items:
-          - enum:
-                # H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1))
-                # H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0))
-              - renesas,h3ulcb
-              - renesas,salvator-x # Salvator-X (RTP0RC7795SIPB0010S)
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S)
-          - const: renesas,r8a7795
-
-      - description: R-Car M3-W (R8A77960)
-        items:
-          - enum:
-              - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0))
-              - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S)
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S)
-          - const: renesas,r8a7796
-
-      - description: R-Car M3-W+ (R8A77961)
-        items:
-          - enum:
-              - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP8J77961ASKB0SK0SA05A (M3 ES3.0))
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012SA5A)
-          - const: renesas,r8a77961
-
-      - description: Kingfisher (SBEV-RCAR-KF-M03)
-        oneOf:
-          - items:
-              - const: shimafuji,kingfisher
-              - enum:
-                  - renesas,h3ulcb
-                  - renesas,m3ulcb
-                  - renesas,m3nulcb
-              - enum:
-                  - renesas,r8a7795
-                  - renesas,r8a7796
-                  - renesas,r8a77961
-                  - renesas,r8a77965
-          - items:
-              - const: shimafuji,kingfisher
-              - enum:
-                  - renesas,h3ulcb
-                  - renesas,m3ulcb
-              - enum:
-                  - renesas,r8a779m1
-                  - renesas,r8a779m3
-              - enum:
-                  - renesas,r8a7795
-                  - renesas,r8a77961
-
-      - description: R-Car M3-N (R8A77965)
-        items:
-          - enum:
-              - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1))
-              - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S (M3-N))
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC77965SIPB012S)
-          - const: renesas,r8a77965
-
-      - description: R-Car V3M (R8A77970)
-        items:
-          - enum:
-              - renesas,eagle # Eagle (RTP0RC77970SEB0010S)
-              - renesas,v3msk # V3MSK (Y-ASK-RCAR-V3M-WS10)
-          - const: renesas,r8a77970
-
-      - description: R-Car V3H (R8A77980)
-        items:
-          - enum:
-              - renesas,condor # Condor (RTP0RC77980SEB0010SS/RTP0RC77980SEB0010SA01)
-              - renesas,v3hsk # V3HSK (Y-ASK-RCAR-V3H-WS10)
-          - const: renesas,r8a77980
-
-      - description: R-Car E3 (R8A77990)
-        items:
-          - enum:
-              - renesas,ebisu # Ebisu (RTP0RC77990SEB0010S)
-          - const: renesas,r8a77990
-
-      - description: R-Car D3 (R8A77995)
-        items:
-          - enum:
-              - renesas,draak # Draak (RTP0RC77995SEB0010S)
-          - const: renesas,r8a77995
-
-      - description: R-Car V3U (R8A779A0)
-        items:
-          - enum:
-              - renesas,falcon-cpu # Falcon CPU board (RTP0RC779A0CPB0010S)
-          - const: renesas,r8a779a0
-
-      - items:
-          - enum:
-              - renesas,falcon-breakout # Falcon BreakOut board (RTP0RC779A0BOB0010S)
-          - const: renesas,falcon-cpu
-          - const: renesas,r8a779a0
-
-      - description: R-Car H3e-2G (R8A779M1)
-        items:
-          - enum:
-              - renesas,h3ulcb      # H3ULCB (R-Car Starter Kit Premier)
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
-          - const: renesas,r8a779m1
-          - const: renesas,r8a7795
-
-      - description: R-Car M3e-2G (R8A779M3)
-        items:
-          - enum:
-              - renesas,m3ulcb      # M3ULCB (R-Car Starter Kit Pro)
-              - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
-          - const: renesas,r8a779m3
-          - const: renesas,r8a77961
-
-      - description: RZ/N1D (R9A06G032)
-        items:
-          - enum:
-              - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
-          - const: renesas,r9a06g032
-
-      - description: RZ/G2UL (R9A07G043)
-        items:
-          - enum:
-              - renesas,r9a07g043u11 # RZ/G2UL Type-1
-              - renesas,r9a07g043u12 # RZ/G2UL Type-2
-          - const: renesas,r9a07g043
-
-      - description: RZ/G2{L,LC} (R9A07G044)
-        items:
-          - enum:
-              - renesas,smarc-evk # SMARC EVK
-          - enum:
-              - renesas,r9a07g044c1 # Single Cortex-A55 RZ/G2LC
-              - renesas,r9a07g044c2 # Dual Cortex-A55 RZ/G2LC
-              - renesas,r9a07g044l1 # Single Cortex-A55 RZ/G2L
-              - renesas,r9a07g044l2 # Dual Cortex-A55 RZ/G2L
-          - const: renesas,r9a07g044
-
-additionalProperties: true
-
-...
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 6546b015fc62..ec141c937b8b 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/rockchip.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip platforms device tree bindings
+title: Rockchip platforms
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
@@ -30,6 +30,31 @@ properties:
           - const: amarula,vyasa-rk3288
           - const: rockchip,rk3288
 
+      - description: Anbernic RG351M
+        items:
+          - const: anbernic,rg351m
+          - const: rockchip,rk3326
+
+      - description: Anbernic RG353P
+        items:
+          - const: anbernic,rg353p
+          - const: rockchip,rk3566
+
+      - description: Anbernic RG353V
+        items:
+          - const: anbernic,rg353v
+          - const: rockchip,rk3566
+
+      - description: Anbernic RG353VS
+        items:
+          - const: anbernic,rg353vs
+          - const: rockchip,rk3566
+
+      - description: Anbernic RG503
+        items:
+          - const: anbernic,rg503
+          - const: rockchip,rk3566
+
       - description: Asus Tinker board
         items:
           - const: asus,rk3288-tinker
@@ -65,11 +90,33 @@ properties:
           - const: chipspark,rayeager-px2
           - const: rockchip,rk3066a
 
+      - description: Edgeble Neural Compute Module 2(Neu2) SoM based boards
+        items:
+          - const: edgeble,neural-compute-module-2-io   # Edgeble Neural Compute Module 2 IO Board
+          - const: edgeble,neural-compute-module-2      # Edgeble Neural Compute Module 2 SoM
+          - const: rockchip,rv1126
+
+      - description: Edgeble Neural Compute Module 6(Neu6) Model A SoM based boards
+        items:
+          - const: edgeble,neural-compute-module-6a-io  # Edgeble Neural Compute Module 6A IO Board
+          - const: edgeble,neural-compute-module-6a     # Edgeble Neural Compute Module 6A SoM
+          - const: rockchip,rk3588
+
       - description: Elgin RV1108 R1
         items:
           - const: elgin,rv1108-r1
           - const: rockchip,rv1108
 
+      - description: EmbedFire LubanCat 1
+        items:
+          - const: embedfire,lubancat-1
+          - const: rockchip,rk3566
+
+      - description: EmbedFire LubanCat 2
+        items:
+          - const: embedfire,lubancat-2
+          - const: rockchip,rk3568
+
       - description: Engicam PX30.Core C.TOUCH 2.0
         items:
           - const: engicam,px30-core-ctouch2
@@ -115,6 +162,11 @@ properties:
           - const: firefly,roc-rk3328-cc
           - const: rockchip,rk3328
 
+      - description: Firefly ROC-RK3328-PC
+        items:
+          - const: firefly,roc-rk3328-pc
+          - const: rockchip,rk3328
+
       - description: Firefly ROC-RK3399-PC
         items:
           - enum:
@@ -122,9 +174,22 @@ properties:
               - firefly,roc-rk3399-pc-mezzanine
           - const: rockchip,rk3399
 
-      - description: FriendlyElec NanoPi R2S
+      - description: Firefly ROC-RK3399-PC-PLUS
+        items:
+          - enum:
+              - firefly,roc-rk3399-pc-plus
+          - const: rockchip,rk3399
+
+      - description: Firefly Station M2
+        items:
+          - const: firefly,rk3566-roc-pc
+          - const: rockchip,rk3566
+
+      - description: FriendlyElec NanoPi R2 series boards
         items:
-          - const: friendlyarm,nanopi-r2s
+          - enum:
+              - friendlyarm,nanopi-r2c
+              - friendlyarm,nanopi-r2s
           - const: rockchip,rk3328
 
       - description: FriendlyElec NanoPi4 series boards
@@ -135,8 +200,16 @@ properties:
               - friendlyarm,nanopi-m4b
               - friendlyarm,nanopi-neo4
               - friendlyarm,nanopi-r4s
+              - friendlyarm,nanopi-r4s-enterprise
           - const: rockchip,rk3399
 
+      - description: FriendlyElec NanoPi R5 series boards
+        items:
+          - enum:
+              - friendlyarm,nanopi-r5c
+              - friendlyarm,nanopi-r5s
+          - const: rockchip,rk3568
+
       - description: GeekBuying GeekBox
         items:
           - const: geekbuying,geekbox
@@ -287,6 +360,34 @@ properties:
           - const: google,veyron
           - const: rockchip,rk3288
 
+      - description: Google Scarlet - Dumo (ASUS Chromebook Tablet CT100)
+        items:
+          - const: google,scarlet-rev15-sku0
+          - const: google,scarlet-rev15
+          - const: google,scarlet-rev14-sku0
+          - const: google,scarlet-rev14
+          - const: google,scarlet-rev13-sku0
+          - const: google,scarlet-rev13
+          - const: google,scarlet-rev12-sku0
+          - const: google,scarlet-rev12
+          - const: google,scarlet-rev11-sku0
+          - const: google,scarlet-rev11
+          - const: google,scarlet-rev10-sku0
+          - const: google,scarlet-rev10
+          - const: google,scarlet-rev9-sku0
+          - const: google,scarlet-rev9
+          - const: google,scarlet-rev8-sku0
+          - const: google,scarlet-rev8
+          - const: google,scarlet-rev7-sku0
+          - const: google,scarlet-rev7
+          - const: google,scarlet-rev6-sku0
+          - const: google,scarlet-rev6
+          - const: google,scarlet-rev5-sku0
+          - const: google,scarlet-rev5
+          - const: google,scarlet
+          - const: google,gru
+          - const: rockchip,rk3399
+
       - description: Google Scarlet - Kingdisplay (Acer Chromebook Tab 10)
         items:
           - const: google,scarlet-rev15-sku7
@@ -319,30 +420,55 @@ properties:
           - const: google,gru
           - const: rockchip,rk3399
 
-      - description: Google Scarlet - Innolux display (Acer Chromebook Tab 10)
+      - description: |
+          Google Scarlet - Innolux display (Acer Chromebook Tab 10 and more)
         items:
+          - const: google,scarlet-rev15-sku2
+          - const: google,scarlet-rev15-sku4
           - const: google,scarlet-rev15-sku6
           - const: google,scarlet-rev15
+          - const: google,scarlet-rev14-sku2
+          - const: google,scarlet-rev14-sku4
           - const: google,scarlet-rev14-sku6
           - const: google,scarlet-rev14
+          - const: google,scarlet-rev13-sku2
+          - const: google,scarlet-rev13-sku4
           - const: google,scarlet-rev13-sku6
           - const: google,scarlet-rev13
+          - const: google,scarlet-rev12-sku2
+          - const: google,scarlet-rev12-sku4
           - const: google,scarlet-rev12-sku6
           - const: google,scarlet-rev12
+          - const: google,scarlet-rev11-sku2
+          - const: google,scarlet-rev11-sku4
           - const: google,scarlet-rev11-sku6
           - const: google,scarlet-rev11
+          - const: google,scarlet-rev10-sku2
+          - const: google,scarlet-rev10-sku4
           - const: google,scarlet-rev10-sku6
           - const: google,scarlet-rev10
+          - const: google,scarlet-rev9-sku2
+          - const: google,scarlet-rev9-sku4
           - const: google,scarlet-rev9-sku6
           - const: google,scarlet-rev9
+          - const: google,scarlet-rev8-sku2
+          - const: google,scarlet-rev8-sku4
           - const: google,scarlet-rev8-sku6
           - const: google,scarlet-rev8
+          - const: google,scarlet-rev7-sku2
+          - const: google,scarlet-rev7-sku4
           - const: google,scarlet-rev7-sku6
           - const: google,scarlet-rev7
+          - const: google,scarlet-rev6-sku2
+          - const: google,scarlet-rev6-sku4
           - const: google,scarlet-rev6-sku6
           - const: google,scarlet-rev6
+          - const: google,scarlet-rev5-sku2
+          - const: google,scarlet-rev5-sku4
           - const: google,scarlet-rev5-sku6
           - const: google,scarlet-rev5
+          - const: google,scarlet-rev4-sku2
+          - const: google,scarlet-rev4-sku4
           - const: google,scarlet-rev4-sku6
           - const: google,scarlet-rev4
           - const: google,scarlet
@@ -388,6 +514,21 @@ properties:
           - const: hardkernel,rk3326-odroid-go2
           - const: rockchip,rk3326
 
+      - description: Hardkernel Odroid Go Advance Black Edition
+        items:
+          - const: hardkernel,rk3326-odroid-go2-v11
+          - const: rockchip,rk3326
+
+      - description: Hardkernel Odroid Go Super
+        items:
+          - const: hardkernel,rk3326-odroid-go3
+          - const: rockchip,rk3326
+
+      - description: Hardkernel Odroid M1
+        items:
+          - const: rockchip,rk3568-odroid-m1
+          - const: rockchip,rk3568
+
       - description: Hugsun X99 TV Box
         items:
           - const: hugsun,x99
@@ -401,6 +542,11 @@ properties:
               - khadas,edge-v
           - const: rockchip,rk3399
 
+      - description: Khadas Edge2 series boards
+        items:
+          - const: khadas,edge2
+          - const: rockchip,rk3588s
+
       - description: Kobol Helios64
         items:
           - const: kobol,helios64
@@ -426,6 +572,11 @@ properties:
           - const: netxeon,r89
           - const: rockchip,rk3288
 
+      - description: OPEN AI LAB EAIDK-610
+        items:
+          - const: openailab,eaidk-610
+          - const: rockchip,rk3399
+
       - description: Orange Pi RK3399 board
         items:
           - const: rockchip,rk3399-orangepi
@@ -442,6 +593,19 @@ properties:
           - const: pine64,pinebook-pro
           - const: rockchip,rk3399
 
+      - description: Pine64 PineNote
+        items:
+          - enum:
+              - pine64,pinenote-v1.1
+              - pine64,pinenote-v1.2
+          - const: pine64,pinenote
+          - const: rockchip,rk3566
+
+      - description: Pine64 PinePhonePro
+        items:
+          - const: pine64,pinephone-pro
+          - const: rockchip,rk3399
+
       - description: Pine64 Rock64
         items:
           - const: pine64,rock64
@@ -455,20 +619,57 @@ properties:
           - const: pine64,rockpro64
           - const: rockchip,rk3399
 
+      - description: Pine64 Quartz64 Model A/B
+        items:
+          - enum:
+              - pine64,quartz64-a
+              - pine64,quartz64-b
+          - const: rockchip,rk3566
+
+      - description: Pine64 SoQuartz SoM
+        items:
+          - enum:
+              - pine64,soquartz-blade
+              - pine64,soquartz-cm4io
+              - pine64,soquartz-model-a
+          - const: pine64,soquartz
+          - const: rockchip,rk3566
+
+      - description: Radxa Compute Module 3(CM3)
+        items:
+          - enum:
+              - radxa,cm3-io
+          - const: radxa,cm3
+          - const: rockchip,rk3566
+
+      - description: Radxa CM3 Industrial
+        items:
+          - enum:
+              - radxa,e25
+          - const: radxa,cm3i
+          - const: rockchip,rk3568
+
       - description: Radxa Rock
         items:
           - const: radxa,rock
           - const: rockchip,rk3188
 
-      - description: Radxa ROCK Pi 4A/B/C
+      - description: Radxa ROCK Pi 4A/A+/B/B+/C
         items:
           - enum:
               - radxa,rockpi4a
+              - radxa,rockpi4a-plus
               - radxa,rockpi4b
+              - radxa,rockpi4b-plus
               - radxa,rockpi4c
           - const: radxa,rockpi4
           - const: rockchip,rk3399
 
+      - description: Radxa ROCK 4C+
+        items:
+          - const: radxa,rock-4c-plus
+          - const: rockchip,rk3399
+
       - description: Radxa ROCK Pi E
         items:
           - const: radxa,rockpi-e
@@ -486,11 +687,31 @@ properties:
           - const: vamrs,rk3399pro-vmarc-som
           - const: rockchip,rk3399pro
 
+      - description: Radxa ROCK Pi S
+        items:
+          - const: radxa,rockpis
+          - const: rockchip,rk3308
+
       - description: Radxa Rock2 Square
         items:
           - const: radxa,rock2-square
           - const: rockchip,rk3288
 
+      - description: Radxa ROCK3 Model A
+        items:
+          - const: radxa,rock3a
+          - const: rockchip,rk3568
+
+      - description: Radxa ROCK 5 Model A
+        items:
+          - const: radxa,rock-5a
+          - const: rockchip,rk3588s
+
+      - description: Radxa ROCK 5 Model B
+        items:
+          - const: radxa,rock-5b
+          - const: rockchip,rk3588
+
       - description: Rikomagic MK808 v1
         items:
           - const: rikomagic,mk808
@@ -528,6 +749,11 @@ properties:
           - const: rockchip,rk3036-evb
           - const: rockchip,rk3036
 
+      - description: Rockchip RK3128 Evaluation board
+        items:
+          - const: rockchip,rk3128-evb
+          - const: rockchip,rk3128
+
       - description: Rockchip RK3228 Evaluation board
         items:
           - const: rockchip,rk3228-evb
@@ -575,11 +801,21 @@ properties:
           - const: rockchip,rk3399-sapphire-excavator
           - const: rockchip,rk3399
 
+      - description: Rockchip RK3588 Evaluation board
+        items:
+          - const: rockchip,rk3588-evb1-v10
+          - const: rockchip,rk3588
+
       - description: Rockchip RV1108 Evaluation board
         items:
           - const: rockchip,rv1108-evb
           - const: rockchip,rv1108
 
+      - description: Theobroma Systems PX30-uQ7 with Haikou baseboard
+        items:
+          - const: tsd,px30-ringneck-haikou
+          - const: rockchip,px30
+
       - description: Theobroma Systems RK3368-uQ7 with Haikou baseboard
         items:
           - const: tsd,rk3368-lion-haikou
@@ -595,16 +831,33 @@ properties:
           - const: tronsmart,orion-r68-meta
           - const: rockchip,rk3368
 
+      - description: Xunlong Orange Pi R1 Plus / LTS
+        items:
+          - enum:
+              - xunlong,orangepi-r1-plus
+              - xunlong,orangepi-r1-plus-lts
+          - const: rockchip,rk3328
+
       - description: Zkmagic A95X Z2
         items:
           - const: zkmagic,a95x-z2
           - const: rockchip,rk3318
 
+      - description: Rockchip RK3566 BOX Evaluation Demo board
+        items:
+          - const: rockchip,rk3566-box-demo
+          - const: rockchip,rk3566
+
       - description: Rockchip RK3568 Evaluation board
         items:
           - const: rockchip,rk3568-evb1-v10
           - const: rockchip,rk3568
 
+      - description: Rockchip RK3568 Banana Pi R2 Pro
+        items:
+          - const: rockchip,rk3568-bpi-r2pro
+          - const: rockchip,rk3568
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
index 53115b92d17f..b79c81cd9f0e 100644
--- a/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.yaml
@@ -21,8 +21,13 @@ select:
         enum:
           - rockchip,px30-pmu
           - rockchip,rk3066-pmu
+          - rockchip,rk3128-pmu
           - rockchip,rk3288-pmu
+          - rockchip,rk3368-pmu
           - rockchip,rk3399-pmu
+          - rockchip,rk3568-pmu
+          - rockchip,rk3588-pmu
+          - rockchip,rv1126-pmu
 
   required:
     - compatible
@@ -33,8 +38,13 @@ properties:
       - enum:
           - rockchip,px30-pmu
           - rockchip,rk3066-pmu
+          - rockchip,rk3128-pmu
           - rockchip,rk3288-pmu
+          - rockchip,rk3368-pmu
           - rockchip,rk3399-pmu
+          - rockchip,rk3568-pmu
+          - rockchip,rk3588-pmu
+          - rockchip,rv1126-pmu
       - const: syscon
       - const: simple-mfd
 
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
deleted file mode 100644
index f99c0c6df21b..000000000000
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
+++ /dev/null
@@ -1,40 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/samsung/exynos-chipid.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Samsung Exynos SoC series Chipid driver
-
-maintainers:
-  - Krzysztof Kozlowski <krzk@kernel.org>
-
-properties:
-  compatible:
-    items:
-      - const: samsung,exynos4210-chipid
-
-  reg:
-    maxItems: 1
-
-  samsung,asv-bin:
-    description:
-      Adaptive Supply Voltage bin selection. This can be used
-      to determine the ASV bin of an SoC if respective information
-      is missing in the CHIPID registers or in the OTP memory.
-    $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [0, 1, 2, 3]
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  - |
-    chipid@10000000 {
-        compatible = "samsung,exynos4210-chipid";
-        reg = <0x10000000 0x100>;
-        samsung,asv-bin = <2>;
-    };
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
deleted file mode 100644
index 17678d9686c1..000000000000
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
+++ /dev/null
@@ -1,128 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/arm/samsung/pmu.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Samsung Exynos SoC series Power Management Unit (PMU)
-
-maintainers:
-  - Krzysztof Kozlowski <krzk@kernel.org>
-
-# Custom select to avoid matching all nodes with 'syscon'
-select:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - samsung,exynos3250-pmu
-          - samsung,exynos4210-pmu
-          - samsung,exynos4412-pmu
-          - samsung,exynos5250-pmu
-          - samsung,exynos5260-pmu
-          - samsung,exynos5410-pmu
-          - samsung,exynos5420-pmu
-          - samsung,exynos5433-pmu
-          - samsung,exynos7-pmu
-          - samsung-s5pv210-pmu
-  required:
-    - compatible
-
-properties:
-  compatible:
-    items:
-      - enum:
-          - samsung,exynos3250-pmu
-          - samsung,exynos4210-pmu
-          - samsung,exynos4412-pmu
-          - samsung,exynos5250-pmu
-          - samsung,exynos5260-pmu
-          - samsung,exynos5410-pmu
-          - samsung,exynos5420-pmu
-          - samsung,exynos5433-pmu
-          - samsung,exynos7-pmu
-          - samsung-s5pv210-pmu
-      - const: syscon
-
-  reg:
-    maxItems: 1
-
-  assigned-clock-parents: true
-  assigned-clocks: true
-
-  '#clock-cells':
-    const: 1
-
-  clock-names:
-    description:
-      List of clock names for particular CLKOUT mux inputs
-    minItems: 1
-    maxItems: 32
-    items:
-      pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
-
-  clocks:
-    minItems: 1
-    maxItems: 32
-
-  interrupt-controller:
-    description:
-      Some PMUs are capable of behaving as an interrupt controller (mostly
-      to wake up a suspended PMU).
-
-  '#interrupt-cells':
-    description:
-      Must be identical to the that of the parent interrupt controller.
-    const: 3
-
-  syscon-poweroff:
-    $ref: "../../power/reset/syscon-poweroff.yaml#"
-    type: object
-    description:
-      Node for power off method
-
-  syscon-reboot:
-    $ref: "../../power/reset/syscon-reboot.yaml#"
-    type: object
-    description:
-      Node for reboot method
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - samsung,exynos3250-pmu
-              - samsung,exynos4210-pmu
-              - samsung,exynos4412-pmu
-              - samsung,exynos5250-pmu
-              - samsung,exynos5410-pmu
-              - samsung,exynos5420-pmu
-              - samsung,exynos5433-pmu
-    then:
-      required:
-        - '#clock-cells'
-        - clock-names
-        - clocks
-
-examples:
-  - |
-    #include <dt-bindings/clock/exynos5250.h>
-
-    pmu_system_controller: system-controller@10040000 {
-        compatible = "samsung,exynos5250-pmu", "syscon";
-        reg = <0x10040000 0x5000>;
-        interrupt-controller;
-        #interrupt-cells = <3>;
-        interrupt-parent = <&gic>;
-        #clock-cells = <1>;
-        clock-names = "clkout16";
-        clocks = <&clock CLK_FIN_PLL>;
-    };
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
index 0796f0c87727..deb2cf971871 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml
@@ -140,6 +140,8 @@ properties:
         items:
           - enum:
               - insignal,arndale-octa           # Insignal Arndale Octa
+              - samsung,chagall-wifi            # Samsung SM-T800
+              - samsung,klimt-wifi              # Samsung SM-T700
               - samsung,smdk5420                # Samsung SMDK5420 eval
           - const: samsung,exynos5420
           - const: samsung,exynos5
@@ -169,6 +171,7 @@ properties:
               - hardkernel,odroid-xu3-lite      # Hardkernel Odroid XU3 Lite
               - hardkernel,odroid-xu4           # Hardkernel Odroid XU4
               - hardkernel,odroid-hc1           # Hardkernel Odroid HC1
+              - samsung,k3g                     # Samsung Galaxy S5 (SM-G900H)
           - const: samsung,exynos5800
           - const: samsung,exynos5
 
@@ -199,6 +202,24 @@ properties:
               - samsung,exynos7-espresso        # Samsung Exynos7 Espresso
           - const: samsung,exynos7
 
+      - description: Exynos7885 based boards
+        items:
+          - enum:
+              - samsung,jackpotlte              # Samsung Galaxy A8 (2018)
+          - const: samsung,exynos7885
+
+      - description: Exynos850 based boards
+        items:
+          - enum:
+              - winlink,e850-96                 # WinLink E850-96
+          - const: samsung,exynos850
+
+      - description: Exynos Auto v9 based boards
+        items:
+          - enum:
+              - samsung,exynosautov9-sadk   # Samsung Exynos Auto v9 SADK
+          - const: samsung,exynosautov9
+
 required:
   - compatible
 
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml
new file mode 100644
index 000000000000..653f85997643
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-soc.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/samsung/samsung-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C, S5P and Exynos SoC compatibles naming convention
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  Guidelines for new compatibles for SoC blocks/components.
+  When adding new compatibles in new bindings, use the format::
+    samsung,SoC-IP
+
+  For example::
+    samsung,exynos5433-cmu-isp
+
+select:
+  properties:
+    compatible:
+      pattern: "^samsung,.*(s3c|s5pv|exynos)[0-9a-z]+.*$"
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - description: Preferred naming style for compatibles of SoC components
+        pattern: "^samsung,(s3c|s5pv|exynos|exynosautov)[0-9]+-.*$"
+
+      # Legacy compatibles with wild-cards - list cannot grow with new bindings:
+      - enum:
+          - samsung,exynos4x12-pinctrl
+          - samsung,exynos4x12-usb2-phy
+          - samsung,s3c64xx-pinctrl
+          - samsung,s3c64xx-wakeup-eint
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
index aa1d4afbc510..5a428a885760 100644
--- a/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
+++ b/Documentation/devicetree/bindings/arm/socionext/milbeaut.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/socionext/milbeaut.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Milbeaut platforms device tree bindings
+title: Milbeaut platforms
 
 maintainers:
   - Taichi Sugaya <sugaya.taichi@socionext.com>
diff --git a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
index 8c0e91658474..3e7f3d927ec7 100644
--- a/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
+++ b/Documentation/devicetree/bindings/arm/socionext/uniphier.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/socionext/uniphier.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Socionext UniPhier platform device tree bindings
+title: Socionext UniPhier platform
 
 maintainers:
   - Masahiro Yamada <yamada.masahiro@socionext.com>
@@ -26,6 +26,12 @@ properties:
               - socionext,uniphier-pro4-ref
               - socionext,uniphier-pro4-sanji
           - const: socionext,uniphier-pro4
+      - description: Pro5 SoC boards
+        items:
+          - enum:
+              - socionext,uniphier-pro5-epcore
+              - socionext,uniphier-pro5-proex
+          - const: socionext,uniphier-pro5
       - description: sLD8 SoC boards
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt
deleted file mode 100644
index 46652bf65147..000000000000
--- a/Documentation/devicetree/bindings/arm/sp810.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-SP810 System Controller
------------------------
-
-Required properties:
-
-- compatible:	standard compatible string for a Primecell peripheral,
-		see Documentation/devicetree/bindings/arm/primecell.yaml
-		for more details
-		should be: "arm,sp810", "arm,primecell"
-
-- reg:		standard registers property, physical address and size
-		of the control registers
-
-- clock-names:	from the common clock bindings, for more details see
-		Documentation/devicetree/bindings/clock/clock-bindings.txt;
-		should be: "refclk", "timclk", "apb_pclk"
-
-- clocks:	from the common clock bindings, phandle and clock
-		specifier pairs for the entries of clock-names property
-
-- #clock-cells: from the common clock bindings;
-		should be: <1>
-
-- clock-output-names: from the common clock bindings;
-		should be: "timerclken0", "timerclken1", "timerclken2", "timerclken3"
-
-- assigned-clocks: from the common clock binding;
-		should be: clock specifier for each output clock of this
-		provider node
-
-- assigned-clock-parents: from the common clock binding;
-		should be: phandle of input clock listed in clocks
-		property with the highest frequency
-
-Example:
-	v2m_sysctl: sysctl@20000 {
-		compatible = "arm,sp810", "arm,primecell";
-		reg = <0x020000 0x1000>;
-		clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
-		clock-names = "refclk", "timclk", "apb_pclk";
-		#clock-cells = <1>;
-		clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
-		assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
-		assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
-
-	};
diff --git a/Documentation/devicetree/bindings/arm/sp810.yaml b/Documentation/devicetree/bindings/arm/sp810.yaml
new file mode 100644
index 000000000000..c9094e5ec565
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sp810.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sp810.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express SP810 System Controller
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm SP810 system controller provides clocks, timers and a watchdog.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,sp810
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: arm,sp810
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: refclk
+      - const: timclk
+      - const: apb_pclk
+
+  clocks:
+    items:
+      - description: reference clock
+      - description: timer clock
+      - description: APB register access clock
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    maxItems: 4
+
+  assigned-clocks:
+    maxItems: 4
+
+  assigned-clock-parents:
+    maxItems: 4
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+
+examples:
+  - |
+    sysctl@20000 {
+        compatible = "arm,sp810", "arm,primecell";
+        reg = <0x020000 0x1000>;
+        clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+        clock-names = "refclk", "timclk", "apb_pclk";
+        #clock-cells = <1>;
+        clock-output-names = "timerclken0", "timerclken1",
+                             "timerclken2", "timerclken3";
+        assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>,
+                          <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+        assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>,
+                                 <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/spe-pmu.txt b/Documentation/devicetree/bindings/arm/spe-pmu.txt
deleted file mode 100644
index 93372f2a7df9..000000000000
--- a/Documentation/devicetree/bindings/arm/spe-pmu.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU)
-
-ARMv8.2 introduces the optional Statistical Profiling Extension for collecting
-performance sample data using an in-memory trace buffer.
-
-** SPE Required properties:
-
-- compatible : should be one of:
-	       "arm,statistical-profiling-extension-v1"
-
-- interrupts : Exactly 1 PPI must be listed. For heterogeneous systems where
-               SPE is only supported on a subset of the CPUs, please consult
-	       the arm,gic-v3 binding for details on describing a PPI partition.
-
-** Example:
-
-spe-pmu {
-        compatible = "arm,statistical-profiling-extension-v1";
-        interrupts = <GIC_PPI 05 IRQ_TYPE_LEVEL_HIGH &part1>;
-};
diff --git a/Documentation/devicetree/bindings/arm/spear.yaml b/Documentation/devicetree/bindings/arm/spear.yaml
index 605ad3f882ef..a465c9eca76e 100644
--- a/Documentation/devicetree/bindings/arm/spear.yaml
+++ b/Documentation/devicetree/bindings/arm/spear.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/spear.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ST SPEAr Platforms Device Tree Bindings
+title: ST SPEAr Platforms
 
 maintainers:
   - Viresh Kumar <vireshk@kernel.org>
diff --git a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
index 7b6ae3070396..eaa67b8e0d6c 100644
--- a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
+++ b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/arm/sprd/sprd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Unisoc platforms device tree bindings
+title: Unisoc platforms
 
 maintainers:
   - Orson Zhai <orsonzhai@gmail.com>
@@ -30,6 +30,11 @@ properties:
               - sprd,sp9863a-1h10
           - const: sprd,sc9863a
 
+      - items:
+          - enum:
+              - sprd,ums512-1h10
+          - const: sprd,ums512
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/arm/sti.yaml b/Documentation/devicetree/bindings/arm/sti.yaml
index b1f28d16d3fb..3ca054c64377 100644
--- a/Documentation/devicetree/bindings/arm/sti.yaml
+++ b/Documentation/devicetree/bindings/arm/sti.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/arm/sti.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ST STi Platforms Device Tree Bindings
+title: ST STi Platforms
 
 maintainers:
-  - Patrice Chotard <patrice.chotard@st.com>
+  - Patrice Chotard <patrice.chotard@foss.st.com>
 
 properties:
   $nodename:
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
index 8e711bd202fd..2297ad3f4774 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
@@ -4,11 +4,11 @@
 $id: "http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: STMicroelectronics STM32 ML-AHB interconnect bindings
+title: STMicroelectronics STM32 ML-AHB interconnect
 
 maintainers:
-  - Fabien Dessenne <fabien.dessenne@st.com>
-  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
 
 description: |
   These bindings describe the STM32 SoCs ML-AHB interconnect bus which connects
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index 149afb5df5af..ad8e51aa01b0 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -4,11 +4,11 @@
 $id: "http://devicetree.org/schemas/arm/stm32/st,stm32-syscon.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: STMicroelectronics STM32 Platforms System Controller bindings
+title: STMicroelectronics STM32 Platforms System Controller
 
 maintainers:
-  - Alexandre Torgue <alexandre.torgue@st.com>
-  - Christophe Roullier <christophe.roullier@st.com>
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Christophe Roullier <christophe.roullier@foss.st.com>
 
 properties:
   compatible:
@@ -20,6 +20,7 @@ properties:
               - st,stm32-syscfg
               - st,stm32-power-config
               - st,stm32-tamp
+              - st,stm32f4-gcan
           - const: syscon
       - items:
           - const: st,stm32-tamp
@@ -42,6 +43,7 @@ if:
       contains:
         enum:
           - st,stm32mp157-syscfg
+          - st,stm32f4-gcan
 then:
   required:
     - clocks
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index 9a77ab74be99..13e34241145b 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -4,30 +4,21 @@
 $id: http://devicetree.org/schemas/arm/stm32/stm32.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Platforms Device Tree Bindings
+title: STMicroelectronics STM32 Platforms
 
 maintainers:
-  - Alexandre Torgue <alexandre.torgue@st.com>
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
 
 properties:
   $nodename:
     const: "/"
   compatible:
     oneOf:
-      - description: DH STM32MP1 SoM based Boards
+      - description: emtrion STM32MP1 Argon based Boards
         items:
-          - enum:
-              - arrow,stm32mp157a-avenger96 # Avenger96
-              - dh,stm32mp153c-dhcom-drc02
-              - dh,stm32mp157c-dhcom-pdk2
-              - dh,stm32mp157c-dhcom-picoitx
-          - enum:
-              - dh,stm32mp153c-dhcom-som
-              - dh,stm32mp157a-dhcor-som
-              - dh,stm32mp157c-dhcom-som
-          - enum:
-              - st,stm32mp153
-              - st,stm32mp157
+          - const: emtrion,stm32mp157c-emsbc-argon
+          - const: emtrion,stm32mp157c-emstamp-argon
+          - const: st,stm32mp157
       - items:
           - enum:
               - st,stm32f429i-disco
@@ -57,22 +48,86 @@ properties:
           - const: st,stm32h750
       - items:
           - enum:
+              - st,stm32mp135f-dk
+          - const: st,stm32mp135
+
+      - description: ST STM32MP151 based Boards
+        items:
+          - enum:
+              - prt,prtt1a   # Protonic PRTT1A
+              - prt,prtt1c   # Protonic PRTT1C
+              - prt,prtt1s   # Protonic PRTT1S
+          - const: st,stm32mp151
+
+      - description: DH STM32MP151 DHCOR SoM based Boards
+        items:
+          - const: dh,stm32mp151a-dhcor-testbench
+          - const: dh,stm32mp151a-dhcor-som
+          - const: st,stm32mp151
+
+      - description: DH STM32MP153 DHCOM SoM based Boards
+        items:
+          - const: dh,stm32mp153c-dhcom-drc02
+          - const: dh,stm32mp153c-dhcom-som
+          - const: st,stm32mp153
+
+      - description: DH STM32MP153 DHCOR SoM based Boards
+        items:
+          - const: dh,stm32mp153c-dhcor-drc-compact
+          - const: dh,stm32mp153c-dhcor-som
+          - const: st,stm32mp153
+
+      - items:
+          - enum:
               - shiratech,stm32mp157a-iot-box # IoT Box
               - shiratech,stm32mp157a-stinger96 # Stinger96
               - st,stm32mp157c-ed1
               - st,stm32mp157a-dk1
               - st,stm32mp157c-dk2
+          - const: st,stm32mp157
 
+      - items:
+          - const: st,stm32mp157a-dk1-scmi
+          - const: st,stm32mp157a-dk1
           - const: st,stm32mp157
       - items:
+          - const: st,stm32mp157c-dk2-scmi
+          - const: st,stm32mp157c-dk2
+          - const: st,stm32mp157
+      - items:
+          - const: st,stm32mp157c-ed1-scmi
+          - const: st,stm32mp157c-ed1
+          - const: st,stm32mp157
+      - items:
+          - const: st,stm32mp157c-ev1
+          - const: st,stm32mp157c-ed1
+          - const: st,stm32mp157
+      - items:
+          - const: st,stm32mp157c-ev1-scmi
           - const: st,stm32mp157c-ev1
           - const: st,stm32mp157c-ed1
           - const: st,stm32mp157
 
+      - description: DH STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - arrow,stm32mp157a-avenger96 # Avenger96
+          - const: dh,stm32mp157a-dhcor-som
+          - const: st,stm32mp157
+
+      - description: DH STM32MP1 SoM based Boards
+        items:
+          - enum:
+              - dh,stm32mp157c-dhcom-pdk2
+              - dh,stm32mp157c-dhcom-picoitx
+          - const: dh,stm32mp157c-dhcom-som
+          - const: st,stm32mp157
+
       - description: Engicam i.Core STM32MP1 SoM based Boards
         items:
           - enum:
               - engicam,icore-stm32mp1-ctouch2       # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0
+              - engicam,icore-stm32mp1-ctouch2-of10  # STM32MP1 Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF
               - engicam,icore-stm32mp1-edimm2.2      # STM32MP1 Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
           - const: engicam,icore-stm32mp1            # STM32MP1 Engicam i.Core STM32MP1 SoM
           - const: st,stm32mp157
@@ -92,6 +147,7 @@ properties:
           - const: oct,stm32mp15xx-osd32
           - enum:
               - st,stm32mp157
+
       - description: Odyssey STM32MP1 SoM based Boards
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml b/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
new file mode 100644
index 000000000000..def7d0cfeb31
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunplus,sp7021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Boards
+
+maintainers:
+  - qinjian <qinjian@cqplus1.com>
+
+description: |
+  ARM platforms using Sunplus SP7021, an ARM Cortex A7 (4-cores) based SoC.
+  Wiki: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - sunplus,sp7021-achip
+          - sunplus,sp7021-demo-v3
+      - const: sunplus,sp7021
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 889128acf49a..013821f4a7b8 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/sunxi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner platforms device tree bindings
+title: Allwinner platforms
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -366,6 +366,12 @@ properties:
           - const: lamobo,lamobo-r1
           - const: allwinner,sun7i-a20
 
+      - description: Lctech Pi F1C200s
+        items:
+          - const: lctech,pi-f1c200s
+          - const: allwinner,suniv-f1c200s
+          - const: allwinner,suniv-f1c100s
+
       - description: Libre Computer Board ALL-H3-CC H2+
         items:
           - const: libretech,all-h3-cc-h2-plus
@@ -391,6 +397,11 @@ properties:
           - const: libretech,all-h5-cc-h5
           - const: allwinner,sun50i-h5
 
+      - description: Lichee Pi Nano
+        items:
+          - const: licheepi,licheepi-nano
+          - const: allwinner,suniv-f1c100s
+
       - description: Lichee Pi One
         items:
           - const: licheepi,licheepi-one
@@ -444,6 +455,11 @@ properties:
           - const: haoyu,a10-marsboard
           - const: allwinner,sun4i-a10
 
+      - description: HAOYU Electronics Marsboard A20
+        items:
+          - const: haoyu,a20-marsboard
+          - const: allwinner,sun7i-a20
+
       - description: MapleBoard MP130
         items:
           - const: mapleboard,mp130
@@ -797,6 +813,13 @@ properties:
           - const: sinlinx,sina33
           - const: allwinner,sun8i-a33
 
+      - description: SourceParts PopStick v1.1
+        items:
+          - const: sourceparts,popstick-v1.1
+          - const: sourceparts,popstick
+          - const: allwinner,suniv-f1c200s
+          - const: allwinner,suniv-f1c100s
+
       - description: SL631 Action Camera with IMX179
         items:
           - const: allwinner,sl631-imx179
@@ -808,6 +831,11 @@ properties:
           - const: oranth,tanix-tx6
           - const: allwinner,sun50i-h6
 
+      - description: Tanix TX6 mini
+        items:
+          - const: oranth,tanix-tx6-mini
+          - const: allwinner,sun50i-h6
+
       - description: TBS A711 Tablet
         items:
           - const: tbs-biometrics,a711
@@ -828,6 +856,11 @@ properties:
           - const: wexler,tab7200
           - const: allwinner,sun7i-a20
 
+      - description: MangoPi MQ-R board
+        items:
+          - const: widora,mangopi-mq-r-t113
+          - const: allwinner,sun8i-t113s
+
       - description: WITS A31 Colombus Evaluation Board
         items:
           - const: wits,colombus
@@ -848,6 +881,11 @@ properties:
           - const: yones-toptech,bs1078-v2
           - const: allwinner,sun6i-a31s
 
+      - description: X96 Mate TV box
+        items:
+          - const: hechuang,x96-mate
+          - const: allwinner,sun50i-h616
+
       - description: Xunlong OrangePi
         items:
           - const: xunlong,orangepi
@@ -948,4 +986,9 @@ properties:
           - const: xunlong,orangepi-zero-plus2-h3
           - const: allwinner,sun8i-h3
 
+      - description: Xunlong OrangePi Zero 2
+        items:
+          - const: xunlong,orangepi-zero2
+          - const: allwinner,sun50i-h616
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
index e713a6fe4cf7..99566688d033 100644
--- a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml
@@ -29,14 +29,51 @@ properties:
   compatible:
     enum:
       - allwinner,sun5i-a13-mbus
+      - allwinner,sun8i-a33-mbus
+      - allwinner,sun8i-a50-mbus
+      - allwinner,sun8i-a83t-mbus
       - allwinner,sun8i-h3-mbus
+      - allwinner,sun8i-r40-mbus
+      - allwinner,sun8i-v3s-mbus
+      - allwinner,sun8i-v536-mbus
+      - allwinner,sun20i-d1-mbus
       - allwinner,sun50i-a64-mbus
+      - allwinner,sun50i-a100-mbus
+      - allwinner,sun50i-h5-mbus
+      - allwinner,sun50i-h6-mbus
+      - allwinner,sun50i-h616-mbus
+      - allwinner,sun50i-r329-mbus
 
   reg:
-    maxItems: 1
+    minItems: 1
+    items:
+      - description: MBUS interconnect/bandwidth limit/PMU registers
+      - description: DRAM controller/PHY registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mbus
+      - const: dram
 
   clocks:
+    minItems: 1
+    items:
+      - description: MBUS interconnect module clock
+      - description: DRAM controller/PHY module clock
+      - description: Register bus clock, shared by MBUS and DRAM
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: mbus
+      - const: dram
+      - const: bus
+
+  interrupts:
     maxItems: 1
+    description:
+      MBUS PMU activity interrupt.
 
   dma-ranges:
     description:
@@ -53,13 +90,55 @@ required:
   - clocks
   - dma-ranges
 
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - allwinner,sun5i-a13-mbus
+            - allwinner,sun8i-r40-mbus
+
+then:
+  properties:
+    reg:
+      minItems: 2
+
+    reg-names:
+      minItems: 2
+
+    clocks:
+      minItems: 3
+
+    clock-names:
+      minItems: 3
+
+  required:
+    - reg-names
+    - clock-names
+
+else:
+  properties:
+    reg:
+      maxItems: 1
+
+    reg-names:
+      maxItems: 1
+
+    clocks:
+      maxItems: 1
+
+    clock-names:
+      maxItems: 1
+
 additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/sun5i-ccu.h>
+    #include <dt-bindings/clock/sun50i-a64-ccu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    mbus: dram-controller@1c01000 {
+    dram-controller@1c01000 {
         compatible = "allwinner,sun5i-a13-mbus";
         reg = <0x01c01000 0x1000>;
         clocks = <&ccu CLK_MBUS>;
@@ -69,4 +148,21 @@ examples:
         #interconnect-cells = <1>;
     };
 
+  - |
+    dram-controller@1c62000 {
+        compatible = "allwinner,sun50i-a64-mbus";
+        reg = <0x01c62000 0x1000>,
+              <0x01c63000 0x1000>;
+        reg-names = "mbus", "dram";
+        clocks = <&ccu CLK_MBUS>,
+                 <&ccu CLK_DRAM>,
+                 <&ccu CLK_BUS_DRAM>;
+        clock-names = "mbus", "dram", "bus";
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        dma-ranges = <0x00000000 0x40000000 0xc0000000>;
+        #interconnect-cells = <1>;
+    };
+
 ...
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml
new file mode 100644
index 000000000000..d805c4508b4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner CPU Configuration Controller
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-cpuconfig
+      - allwinner,sun8i-a23-cpuconfig
+      - allwinner,sun8i-a83t-cpucfg
+      - allwinner,sun8i-a83t-r-cpucfg
+      - allwinner,sun9i-a80-cpucfg
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+      cpucfg@1f01c00 {
+          compatible = "allwinner,sun6i-a31-cpuconfig";
+          reg = <0x01f01c00 0x300>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml
new file mode 100644
index 000000000000..644f391afb32
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun9i-a80-prcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A80 PRCM
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  compatible:
+    const: allwinner,sun9i-a80-prcm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+      prcm@8001400 {
+          compatible = "allwinner,sun9i-a80-prcm";
+          reg = <0x08001400 0x200>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/swir.txt b/Documentation/devicetree/bindings/arm/swir.txt
deleted file mode 100644
index 042be73a95d3..000000000000
--- a/Documentation/devicetree/bindings/arm/swir.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Sierra Wireless Modules device tree bindings
---------------------------------------------
-
-Supported Modules :
- - WP8548 : Includes MDM9615 and PM8018 in a module
-
-Sierra Wireless modules shall have the following properties :
-  Required root node property
-   - compatible: "swir,wp8548" for the WP8548 CF3 Module
-
-Board compatible values:
-  - "swir,mangoh-green-wp8548" for the mangOH green board with the WP8548 module
diff --git a/Documentation/devicetree/bindings/arm/syna.txt b/Documentation/devicetree/bindings/arm/syna.txt
index d8b48f2edf1b..851f48ead927 100644
--- a/Documentation/devicetree/bindings/arm/syna.txt
+++ b/Documentation/devicetree/bindings/arm/syna.txt
@@ -18,10 +18,6 @@ stable binding/ABI.
 
 ---------------------------------------------------------------
 
-Boards with the Synaptics AS370 SoC shall have the following properties:
-  Required root node property:
-    compatible: "syna,as370"
-
 Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
 shall have the following properties:
 
diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml
index d79d36ac0c44..0df41f5b7e2a 100644
--- a/Documentation/devicetree/bindings/arm/tegra.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/tegra.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NVIDIA Tegra device tree bindings
+title: NVIDIA Tegra
 
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
@@ -37,6 +37,9 @@ properties:
           - const: toradex,colibri_t20
           - const: nvidia,tegra20
       - items:
+          - const: asus,tf101
+          - const: nvidia,tegra20
+      - items:
           - const: acer,picasso
           - const: nvidia,tegra20
       - items:
@@ -50,6 +53,18 @@ properties:
           - const: nvidia,cardhu
           - const: nvidia,tegra30
       - items:
+          - const: asus,tf201
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf300t
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf300tg
+          - const: nvidia,tegra30
+      - items:
+          - const: asus,tf700t
+          - const: nvidia,tegra30
+      - items:
           - const: toradex,apalis_t30-eval
           - const: toradex,apalis_t30
           - const: nvidia,tegra30
@@ -75,7 +90,11 @@ properties:
           - const: ouya,ouya
           - const: nvidia,tegra30
       - items:
+          - const: pegatron,chagall
+          - const: nvidia,tegra30
+      - items:
           - enum:
+              - asus,tf701t
               - nvidia,dalmore
               - nvidia,roth
               - nvidia,tn7
@@ -108,14 +127,17 @@ properties:
               - nvidia,p2571
               - nvidia,p2894-0050-a08
           - const: nvidia,tegra210
-      - items:
-          - enum:
-              - nvidia,p2771-0000
-              - nvidia,p3509-0000+p3636-0001
+      - description: Jetson TX2 Developer Kit
+        items:
+          - const: nvidia,p2771-0000
           - const: nvidia,tegra186
-      - items:
-          - enum:
-              - nvidia,p2972-0000
+      - description: Jetson TX2 NX Developer Kit
+        items:
+          - const: nvidia,p3509-0000+p3636-0001
+          - const: nvidia,tegra186
+      - description: Jetson AGX Xavier Developer Kit
+        items:
+          - const: nvidia,p2972-0000
           - const: nvidia,tegra194
       - description: Jetson Xavier NX
         items:
@@ -134,8 +156,25 @@ properties:
           - const: nvidia,p3509-0000+p3668-0001
           - const: nvidia,tegra194
       - items:
-          - enum:
-              - nvidia,tegra234-vdk
+          - const: nvidia,tegra234-vdk
+          - const: nvidia,tegra234
+      - description: Jetson AGX Orin
+        items:
+          - const: nvidia,p3701-0000
+          - const: nvidia,tegra234
+      - description: Jetson AGX Orin Developer Kit
+        items:
+          - const: nvidia,p3737-0000+p3701-0000
+          - const: nvidia,p3701-0000
+          - const: nvidia,tegra234
+      - description: Jetson Orin NX
+        items:
+          - const: nvidia,p3767-0000
+          - const: nvidia,tegra234
+      - description: Jetson Orin NX Engineering Reference Developer Kit
+        items:
+          - const: nvidia,p3768-0000+p3767-0000
+          - const: nvidia,p3767-0000
           - const: nvidia,tegra234
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
new file mode 100644
index 000000000000..36dbd0838f2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra-ccplex-cluster.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra-ccplex-cluster.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra CPU COMPLEX CLUSTER area
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+description: |+
+  The Tegra CPU COMPLEX CLUSTER area contains memory-mapped
+  registers that initiate CPU frequency/voltage transitions.
+
+properties:
+  $nodename:
+    pattern: "ccplex@([0-9a-f]+)$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-ccplex-cluster
+      - nvidia,tegra234-ccplex-cluster
+
+  reg:
+    maxItems: 1
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Specifies the BPMP node that needs to be queried to get
+      operating point data for all CPUs.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - nvidia,bpmp
+
+examples:
+  - |
+    ccplex@e000000 {
+      compatible = "nvidia,tegra234-ccplex-cluster";
+      reg = <0x0e000000 0x5ffff>;
+      nvidia,bpmp = <&bpmp>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
deleted file mode 100644
index 576462fae27f..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt
+++ /dev/null
@@ -1,133 +0,0 @@
-NVIDIA Tegra Power Management Controller (PMC)
-
-Required properties:
-- compatible: Should contain one of the following:
-  - "nvidia,tegra186-pmc": for Tegra186
-  - "nvidia,tegra194-pmc": for Tegra194
-  - "nvidia,tegra234-pmc": for Tegra234
-- reg: Must contain an (offset, length) pair of the register set for each
-  entry in reg-names.
-- reg-names: Must include the following entries:
-  - "pmc"
-  - "wake"
-  - "aotag"
-  - "scratch"
-  - "misc" (Only for Tegra194 and later)
-
-Optional properties:
-- nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value must be 2.
-
-Example:
-
-SoC DTSI:
-
-	pmc@c3600000 {
-		compatible = "nvidia,tegra186-pmc";
-		reg = <0 0x0c360000 0 0x10000>,
-		      <0 0x0c370000 0 0x10000>,
-		      <0 0x0c380000 0 0x10000>,
-		      <0 0x0c390000 0 0x10000>;
-		reg-names = "pmc", "wake", "aotag", "scratch";
-	};
-
-Board DTS:
-
-	pmc@c360000 {
-		nvidia,invert-interrupt;
-	};
-
-== Pad Control ==
-
-On Tegra SoCs a pad is a set of pins which are configured as a group.
-The pin grouping is a fixed attribute of the hardware. The PMC can be
-used to set pad power state and signaling voltage. A pad can be either
-in active or power down mode. The support for power state and signaling
-voltage configuration varies depending on the pad in question. 3.3 V and
-1.8 V signaling voltages are supported on pins where software
-controllable signaling voltage switching is available.
-
-Pad configurations are described with pin configuration nodes which
-are placed under the pmc node and they are referred to by the pinctrl
-client properties. For more information see
-Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
-
-The following pads are present on Tegra186:
-csia		csib		dsi		mipi-bias
-pex-clk-bias	pex-clk3	pex-clk2	pex-clk1
-usb0		usb1		usb2		usb-bias
-uart		audio		hsic		dbg
-hdmi-dp0	hdmi-dp1	pex-cntrl	sdmmc2-hv
-sdmmc4		cam		dsib		dsic
-dsid		csic		csid		csie
-dsif		spi		ufs		dmic-hv
-edp		sdmmc1-hv	sdmmc3-hv	conn
-audio-hv	ao-hv
-
-Required pin configuration properties:
-  - pins: A list of strings, each of which contains the name of a pad
-	  to be configured.
-
-Optional pin configuration properties:
-  - low-power-enable: Configure the pad into power down mode
-  - low-power-disable: Configure the pad into active mode
-  - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
-    TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
-    The values are defined in
-    include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
-
-Note: The power state can be configured on all of the above pads except
-      for ao-hv. Following pads have software configurable signaling
-      voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv, audio-hv,
-      ao-hv.
-
-Pad configuration state example:
-	pmc: pmc@7000e400 {
-		compatible = "nvidia,tegra186-pmc";
-		reg = <0 0x0c360000 0 0x10000>,
-		      <0 0x0c370000 0 0x10000>,
-		      <0 0x0c380000 0 0x10000>,
-		      <0 0x0c390000 0 0x10000>;
-		reg-names = "pmc", "wake", "aotag", "scratch";
-
-		...
-
-		sdmmc1_3v3: sdmmc1-3v3 {
-			pins = "sdmmc1-hv";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
-		};
-
-		sdmmc1_1v8: sdmmc1-1v8 {
-			pins = "sdmmc1-hv";
-			power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
-		};
-
-		hdmi_off: hdmi-off {
-			pins = "hdmi";
-			low-power-enable;
-		}
-
-		hdmi_on: hdmi-on {
-			pins = "hdmi";
-			low-power-disable;
-		}
-	};
-
-Pinctrl client example:
-	sdmmc1: sdhci@3400000 {
-		...
-		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
-		pinctrl-0 = <&sdmmc1_3v3>;
-		pinctrl-1 = <&sdmmc1_1v8>;
-	};
-
-	...
-
-	sor0: sor@15540000 {
-		...
-		pinctrl-0 = <&hdmi_off>;
-		pinctrl-1 = <&hdmi_on>;
-		pinctrl-names = "hdmi-on", "hdmi-off";
-	};
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml
new file mode 100644
index 000000000000..0faa403f68c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra186-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Power Management Controller (PMC)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-pmc
+      - nvidia,tegra194-pmc
+      - nvidia,tegra234-pmc
+
+  reg:
+    minItems: 4
+    maxItems: 5
+
+  reg-names:
+    minItems: 4
+    items:
+      - const: pmc
+      - const: wake
+      - const: aotag
+      - const: scratch
+      - const: misc
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    description: Specifies the number of cells needed to encode an
+      interrupt source. The value must be 2.
+    const: 2
+
+  nvidia,invert-interrupt:
+    description: If present, inverts the PMU interrupt signal.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: nvidia,tegra186-pmc
+then:
+  properties:
+    reg:
+      maxItems: 4
+
+    reg-names:
+      maxItems: 4
+else:
+  properties:
+    reg:
+      minItems: 5
+
+    reg-names:
+      minItems: 5
+
+patternProperties:
+  "^[a-z0-9]+-[a-z0-9]+$":
+    if:
+      type: object
+    then:
+      description: |
+        These are pad configuration nodes. On Tegra SoCs a pad is a set of
+        pins which are configured as a group. The pin grouping is a fixed
+        attribute of the hardware. The PMC can be used to set pad power
+        state and signaling voltage. A pad can be either in active or
+        power down mode. The support for power state and signaling voltage
+        configuration varies depending on the pad in question. 3.3 V and
+        1.8 V signaling voltages are supported on pins where software
+        controllable signaling voltage switching is available.
+
+        Pad configurations are described with pin configuration nodes
+        which are placed under the pmc node and they are referred to by
+        the pinctrl client properties. For more information see
+
+          Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+        The following pads are present on Tegra186:
+
+          csia, csib, dsi, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2,
+          pex-clk1, usb0, usb1, usb2, usb-bias, uart, audio, hsic, dbg,
+          hdmi-dp0, hdmi-dp1, pex-cntrl, sdmmc2-hv, sdmmc4, cam, dsib,
+          dsic, dsid, csic, csid, csie, dsif, spi, ufs, dmic-hv, edp,
+          sdmmc1-hv, sdmmc3-hv, conn, audio-hv, ao-hv
+
+        The following pads are present on Tegra194:
+
+          csia, csib, mipi-bias, pex-clk-bias, pex-clk3, pex-clk2,
+          pex-clk1, eqos, pex-clk-2-bias, pex-clk-2, dap3, dap5, uart,
+          pwr-ctl, soc-gpio53, audio, gp-pwm2, gp-pwm3, soc-gpio12,
+          soc-gpio13, soc-gpio10, uart4, uart5, dbg, hdmi-dp3, hdmi-dp2,
+          hdmi-dp0, hdmi-dp1, pex-cntrl, pex-ctl2, pex-l0-rst,
+          pex-l1-rst, sdmmc4, pex-l5-rst, cam, csic, csid, csie, csif,
+          spi, ufs, csig, csih, edp, sdmmc1-hv, sdmmc3-hv, conn,
+          audio-hv, ao-hv
+
+      properties:
+        pins:
+          $ref: /schemas/types.yaml#/definitions/string
+          description: Must contain the name of the pad(s) to be
+            configured.
+
+        low-power-enable:
+          description: Configure the pad into power down mode.
+          $ref: /schemas/types.yaml#/definitions/flag
+
+        low-power-disable:
+          description: Configure the pad into active mode.
+          $ref: /schemas/types.yaml#/definitions/flag
+
+        power-source:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description: |
+            Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
+            TEGRA_IO_PAD_VOLTAGE_3V3 to select between signalling
+            voltages.
+
+            The values are defined in
+
+              include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h
+
+            The power state can be configured on all of the above pads
+            except for ao-hv. Following pads have software configurable
+            signaling voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv,
+            audio-hv, ao-hv.
+
+        phandle: true
+
+      required:
+        - pins
+
+      additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+dependencies:
+  interrupt-controller: ['#interrupt-cells']
+  "#interrupt-cells":
+    required:
+      - interrupt-controller
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    pmc@c3600000 {
+        compatible = "nvidia,tegra186-pmc";
+        reg = <0x0c360000 0x10000>,
+              <0x0c370000 0x10000>,
+              <0x0c380000 0x10000>,
+              <0x0c390000 0x10000>;
+        reg-names = "pmc", "wake", "aotag", "scratch";
+        nvidia,invert-interrupt;
+
+        sdmmc1_3v3: sdmmc1-3v3 {
+            pins = "sdmmc1-hv";
+            power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+        };
+
+        sdmmc1_1v8: sdmmc1-1v8 {
+            pins = "sdmmc1-hv";
+            power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+        };
+    };
+
+    sdmmc1: mmc@3400000 {
+        compatible = "nvidia,tegra186-sdhci";
+        reg = <0x03400000 0x10000>;
+        interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
+                 <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+        clock-names = "sdhci", "tmclk";
+        resets = <&bpmp TEGRA186_RESET_SDMMC1>;
+        reset-names = "sdhci";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_SDMMCWA &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu TEGRA186_SID_SDMMC1>;
+        pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+        pinctrl-0 = <&sdmmc1_3v3>;
+        pinctrl-1 = <&sdmmc1_1v8>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml
new file mode 100644
index 000000000000..5e0f1dc542b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-axi2apb.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-axi2apb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 AXI2APB bridge
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^axi2apb@([0-9a-f]+)$"
+
+  compatible:
+    enum:
+      - nvidia,tegra194-axi2apb
+
+  reg:
+    maxItems: 6
+    description: Physical base address and length of registers for all bridges
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    axi2apb: axi2apb@2390000 {
+      compatible = "nvidia,tegra194-axi2apb";
+      reg = <0x02390000 0x1000>,
+            <0x023a0000 0x1000>,
+            <0x023b0000 0x1000>,
+            <0x023c0000 0x1000>,
+            <0x023d0000 0x1000>,
+            <0x023e0000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml
new file mode 100644
index 000000000000..d9c54c32c6b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra194-cbb.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra194-cbb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 CBB 1.0
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+
+description: |+
+  The Control Backbone (CBB) is comprised of the physical path from an
+  initiator to a target's register configuration space. CBB 1.0 has
+  multiple hierarchical sub-NOCs (Network-on-Chip) and connects various
+  initiators and targets using different bridges like AXIP2P, AXI2APB.
+
+  This driver handles errors due to illegal register accesses reported
+  by the NOCs inside the CBB. NOCs reporting errors are cluster NOCs
+  "AON-NOC, SCE-NOC, RCE-NOC, BPMP-NOC, CV-NOC" and "CBB Central NOC"
+  which is the main NOC.
+
+  By default, the access issuing initiator is informed about the error
+  using SError or Data Abort exception unless the ERD (Error Response
+  Disable) is enabled/set for that initiator. If the ERD is enabled, then
+  SError or Data Abort is masked and the error is reported with interrupt.
+
+  - For CCPLEX (CPU Complex) initiator, the driver sets ERD bit. So, the
+    errors due to illegal accesses from CCPLEX are reported by interrupts.
+    If ERD is not set, then error is reported by SError.
+  - For other initiators, the ERD is disabled. So, the access issuing
+    initiator is informed about the illegal access by Data Abort exception.
+    In addition, an interrupt is also generated to CCPLEX. These initiators
+    include all engines using Cortex-R5 (which is ARMv7 CPU cluster) and
+    engines like TSEC (Security co-processor), NVDEC (NVIDIA Video Decoder
+    engine) etc which can initiate transactions.
+
+  The driver prints relevant debug information like Error Code, Error
+  Description, Master, Address, AXI ID, Cache, Protection, Security Group
+  etc on receiving error notification.
+
+properties:
+  $nodename:
+    pattern: "^[a-z]+-noc@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra194-cbb-noc
+      - nvidia,tegra194-aon-noc
+      - nvidia,tegra194-bpmp-noc
+      - nvidia,tegra194-rce-noc
+      - nvidia,tegra194-sce-noc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      CCPLEX receives secure or nonsecure interrupt depending on error type.
+      A secure interrupt is received for SEC(firewall) & SLV errors and a
+      non-secure interrupt is received for TMO & DEC errors.
+    items:
+      - description: non-secure interrupt
+      - description: secure interrupt
+
+  nvidia,axi2apb:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies the node having all axi2apb bridges which need to be checked
+      for any error logged in their status register.
+
+  nvidia,apbmisc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Specifies the apbmisc node which need to be used for reading the ERD
+      register.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - nvidia,apbmisc
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cbb-noc@2300000 {
+        compatible = "nvidia,tegra194-cbb-noc";
+        reg = <0x02300000 0x1000>;
+        interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+        nvidia,axi2apb = <&axi2apb>;
+        nvidia,apbmisc = <&apbmisc>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
index 0afec83cc723..89191cfdf619 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
@@ -14,7 +14,6 @@ properties:
   compatible:
     enum:
       - nvidia,tegra20-pmc
-      - nvidia,tegra20-pmc
       - nvidia,tegra30-pmc
       - nvidia,tegra114-pmc
       - nvidia,tegra124-pmc
@@ -124,6 +123,33 @@ properties:
       some PLLs, clocks and then brings up CPU0 for resuming the
       system.
 
+  core-supply:
+    description:
+      Phandle to voltage regulator connected to the SoC Core power rail.
+
+  core-domain:
+    type: object
+    description: |
+      The vast majority of hardware blocks of Tegra SoC belong to a
+      Core power domain, which has a dedicated voltage rail that powers
+      the blocks.
+
+    properties:
+      operating-points-v2:
+        description:
+          Should contain level, voltages and opp-supported-hw property.
+          The supported-hw is a bitfield indicating SoC speedo or process
+          ID mask.
+
+      "#power-domain-cells":
+        const: 0
+
+    required:
+      - operating-points-v2
+      - "#power-domain-cells"
+
+    additionalProperties: false
+
   i2c-thermtrip:
     type: object
     description:
@@ -208,8 +234,9 @@ properties:
     patternProperties:
       "^[a-z0-9]+$":
         type: object
+        additionalProperties: false
 
-        patternProperties:
+        properties:
           clocks:
             minItems: 1
             maxItems: 8
@@ -226,6 +253,9 @@ properties:
               for controlling a power-gate.
               See ../reset/reset.txt for more details.
 
+          power-domains:
+            maxItems: 1
+
           '#power-domain-cells':
             const: 0
             description: Must be 0.
@@ -301,33 +331,6 @@ patternProperties:
 
     additionalProperties: false
 
-  core-domain:
-    type: object
-    description: |
-      The vast majority of hardware blocks of Tegra SoC belong to a
-      Core power domain, which has a dedicated voltage rail that powers
-      the blocks.
-
-    properties:
-      operating-points-v2:
-        description:
-          Should contain level, voltages and opp-supported-hw property.
-          The supported-hw is a bitfield indicating SoC speedo or process
-          ID mask.
-
-      "#power-domain-cells":
-        const: 0
-
-    required:
-      - operating-points-v2
-      - "#power-domain-cells"
-
-    additionalProperties: false
-
-  core-supply:
-    description:
-      Phandle to voltage regulator connected to the SoC Core power rail.
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml
new file mode 100644
index 000000000000..fcdf03131323
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra234-cbb.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra234-cbb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra CBB 2.0
+
+maintainers:
+  - Sumit Gupta <sumitg@nvidia.com>
+
+description: |+
+  The Control Backbone (CBB) is comprised of the physical path from an
+  initiator to a target's register configuration space. CBB 2.0 consists
+  of multiple sub-blocks connected to each other to create a topology.
+  The Tegra234 SoC has different fabrics based on CBB 2.0 architecture
+  which include cluster fabrics BPMP, AON, PSC, SCE, RCE, DCE, FSI and
+  "CBB central fabric".
+
+  In CBB 2.0, each initiator which can issue transactions connects to a
+  Root Master Node (MN) before it connects to any other element of the
+  fabric. Each Root MN contains a Error Monitor (EM) which detects and
+  logs error. Interrupts from various EM blocks are collated by Error
+  Notifier (EN) which is per fabric and presents a single interrupt from
+  fabric to the SoC interrupt controller.
+
+  The driver handles errors from CBB due to illegal register accesses
+  and prints debug information about failed transaction on receiving
+  the interrupt from EN. Debug information includes Error Code, Error
+  Description, MasterID, Fabric, SlaveID, Address, Cache, Protection,
+  Security Group etc on receiving error notification.
+
+  If the Error Response Disable (ERD) is set/enabled for an initiator,
+  then SError or Data abort exception error response is masked and an
+  interrupt is used for reporting errors due to illegal accesses from
+  that initiator. The value returned on read failures is '0xFFFFFFFF'
+  for compatibility with PCIE.
+
+properties:
+  $nodename:
+    pattern: "^[a-z]+-fabric@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra234-aon-fabric
+      - nvidia,tegra234-bpmp-fabric
+      - nvidia,tegra234-cbb-fabric
+      - nvidia,tegra234-dce-fabric
+      - nvidia,tegra234-rce-fabric
+      - nvidia,tegra234-sce-fabric
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: secure interrupt from error notifier
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cbb-fabric@1300000 {
+      compatible = "nvidia,tegra234-cbb-fabric";
+      reg = <0x13a00000 0x400000>;
+      interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/tesla.yaml b/Documentation/devicetree/bindings/arm/tesla.yaml
new file mode 100644
index 000000000000..d670a0d56222
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tesla.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tesla.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tesla Full Self Driving(FSD) platforms
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+  - linux-fsd@tesla.com
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: FSD SoC board
+        items:
+          - enum:
+              - tesla,fsd-evb   # Tesla FSD Evaluation
+          - const: tesla,fsd
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
index c5aa362e4026..e1183f90bb06 100644
--- a/Documentation/devicetree/bindings/arm/ti/k3.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/ti/k3.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments K3 Multicore SoC architecture device tree bindings
+title: Texas Instruments K3 Multicore SoC architecture
 
 maintainers:
   - Nishanth Menon <nm@ti.com>
@@ -19,28 +19,75 @@ properties:
   compatible:
     oneOf:
 
+      - description: K3 AM62A7 SoC
+        items:
+          - enum:
+              - ti,am62a7-sk
+          - const: ti,am62a7
+
+      - description: K3 AM625 SoC
+        items:
+          - enum:
+              - beagle,am625-beagleplay
+              - ti,am625-sk
+              - ti,am62-lp-sk
+          - const: ti,am625
+
+      - description: K3 AM642 SoC
+        items:
+          - enum:
+              - ti,am642-evm
+              - ti,am642-sk
+          - const: ti,am642
+
+      - description: K3 AM642 SoC PHYTEC phyBOARD-Electra
+        items:
+          - const: phytec,am642-phyboard-electra-rdk
+          - const: phytec,am64-phycore-som
+          - const: ti,am642
+
       - description: K3 AM654 SoC
         items:
           - enum:
-              - ti,am654-evm
-              - siemens,iot2050-basic
               - siemens,iot2050-advanced
+              - siemens,iot2050-advanced-m2
+              - siemens,iot2050-advanced-pg2
+              - siemens,iot2050-basic
+              - siemens,iot2050-basic-pg2
+              - ti,am654-evm
           - const: ti,am654
 
+      - description: K3 J7200 SoC
+        oneOf:
+          - const: ti,j7200
+          - items:
+              - enum:
+                  - ti,j7200-evm
+              - const: ti,j7200
+
       - description: K3 J721E SoC
-        items:
+        oneOf:
           - const: ti,j721e
+          - items:
+              - enum:
+                  - beagle,j721e-beagleboneai64
+                  - ti,j721e-evm
+                  - ti,j721e-sk
+              - const: ti,j721e
 
-      - description: K3 J7200 SoC
+      - description: K3 J721s2 SoC
         items:
-          - const: ti,j7200
+          - enum:
+              - ti,am68-sk
+              - ti,j721s2-evm
+          - const: ti,j721s2
 
-      - description: K3 AM642 SoC
+      - description: K3 J784s4 SoC
         items:
           - enum:
-              - ti,am642-evm
-              - ti,am642-sk
-          - const: ti,am642
+              - ti,am69-sk
+              - ti,j784s4-evm
+          - const: ti,j784s4
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
index c022d325fc08..1656d1a4476f 100644
--- a/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/ti,davinci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/ti/ti,davinci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments DaVinci Platforms Device Tree Bindings
+title: Texas Instruments DaVinci Platforms
 
 maintainers:
   - Sekhar Nori <nsekhar@ti.com>
diff --git a/Documentation/devicetree/bindings/arm/toshiba.yaml b/Documentation/devicetree/bindings/arm/toshiba.yaml
index 001bbbcd1432..716ba4a3cab4 100644
--- a/Documentation/devicetree/bindings/arm/toshiba.yaml
+++ b/Documentation/devicetree/bindings/arm/toshiba.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/toshiba.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Toshiba Visconti Platform Device Tree Bindings
+title: Toshiba Visconti Platform
 
 maintainers:
   - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
@@ -18,6 +18,7 @@ properties:
         items:
           - enum:
               - toshiba,tmpv7708-rm-mbrc  # TMPV7708 RM main board
+              - toshiba,tmpv7708-visrobo-vrb  # TMPV7708 VisROBO VRB board
           - const: toshiba,tmpv7708
 
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/trbe.yaml b/Documentation/devicetree/bindings/arm/trbe.yaml
deleted file mode 100644
index 4402d7bfd1fc..000000000000
--- a/Documentation/devicetree/bindings/arm/trbe.yaml
+++ /dev/null
@@ -1,49 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-# Copyright 2021, Arm Ltd
-%YAML 1.2
----
-$id: "http://devicetree.org/schemas/arm/trbe.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
-
-title: ARM Trace Buffer Extensions
-
-maintainers:
-  - Anshuman Khandual <anshuman.khandual@arm.com>
-
-description: |
-  Arm Trace Buffer Extension (TRBE) is a per CPU component
-  for storing trace generated on the CPU to memory. It is
-  accessed via CPU system registers. The software can verify
-  if it is permitted to use the component by checking the
-  TRBIDR register.
-
-properties:
-  $nodename:
-    const: "trbe"
-  compatible:
-    items:
-      - const: arm,trace-buffer-extension
-
-  interrupts:
-    description: |
-       Exactly 1 PPI must be listed. For heterogeneous systems where
-       TRBE is only supported on a subset of the CPUs, please consult
-       the arm,gic-v3 binding for details on describing a PPI partition.
-    maxItems: 1
-
-required:
-  - compatible
-  - interrupts
-
-additionalProperties: false
-
-examples:
-
-  - |
-   #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-   trbe {
-     compatible = "arm,trace-buffer-extension";
-     interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
-   };
-...
diff --git a/Documentation/devicetree/bindings/arm/ux500.yaml b/Documentation/devicetree/bindings/arm/ux500.yaml
index 5db7cfba81a4..b42d20fa4359 100644
--- a/Documentation/devicetree/bindings/arm/ux500.yaml
+++ b/Documentation/devicetree/bindings/arm/ux500.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/ux500.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ux500 platforms device tree bindings
+title: Ux500 platforms
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
@@ -20,6 +20,11 @@ properties:
           - const: st-ericsson,mop500
           - const: st-ericsson,u8500
 
+      - description: ST-Ericsson HREF520
+        items:
+          - const: st-ericsson,href520
+          - const: st-ericsson,u8500
+
       - description: ST-Ericsson HREF (v60+)
         items:
           - const: st-ericsson,hrefv60+
@@ -30,9 +35,39 @@ properties:
           - const: calaosystems,snowball-a9500
           - const: st-ericsson,u9500
 
+      - description: Samsung Galaxy Ace 2 (GT-I8160)
+        items:
+          - const: samsung,codina
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Exhibit (SGH-T599)
+        items:
+          - const: samsung,codina-tmo
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Beam (GT-I8530)
+        items:
+          - const: samsung,gavini
+          - const: st-ericsson,u8500
+
       - description: Samsung Galaxy S III mini (GT-I8190)
         items:
           - const: samsung,golden
           - const: st-ericsson,u8500
 
+      - description: Samsung Galaxy S Advance (GT-I9070)
+        items:
+          - const: samsung,janice
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy Amp (SGH-I407)
+        items:
+          - const: samsung,kyle
+          - const: st-ericsson,u8500
+
+      - description: Samsung Galaxy XCover 2 (GT-S7710)
+        items:
+          - const: samsung,skomer
+          - const: st-ericsson,u8500
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/arm/versatile-sysreg.txt b/Documentation/devicetree/bindings/arm/versatile-sysreg.txt
deleted file mode 100644
index a4f15262d717..000000000000
--- a/Documentation/devicetree/bindings/arm/versatile-sysreg.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-ARM Versatile system registers
---------------------------------------
-
-This is a system control registers block, providing multiple low level
-platform functions like board detection and identification, software
-interrupt generation, MMC and NOR Flash control etc.
-
-Required node properties:
-- compatible value : = "arm,versatile-sysreg", "syscon"
-- reg : physical base address and the size of the registers window
diff --git a/Documentation/devicetree/bindings/arm/vexpress-config.yaml b/Documentation/devicetree/bindings/arm/vexpress-config.yaml
new file mode 100644
index 000000000000..b74380da3198
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress-config.yaml
@@ -0,0 +1,285 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/vexpress-config.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express configuration bus
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  This is a system control register block, acting as a bridge to the
+  platform's configuration bus via "system control" interface, addressing
+  devices with site number, position in the board stack, config controller,
+  function and device numbers - see motherboard's TRM for more details.
+
+properties:
+  compatible:
+    const: arm,vexpress,config-bus
+
+  arm,vexpress,config-bridge:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the sysreg node.
+
+  muxfpga:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-muxfpga
+
+      arm,vexpress-sysreg,func:
+        description: FPGA specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 7
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  shutdown:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-shutdown
+
+      arm,vexpress-sysreg,func:
+        description: shutdown identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 8
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  reboot:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-reboot
+
+      arm,vexpress-sysreg,func:
+        description: reboot identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 9
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  dvimode:
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-dvimode
+
+      arm,vexpress-sysreg,func:
+        description: DVI mode identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 11
+          - description: device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+additionalProperties: false
+
+required:
+  - compatible
+  - arm,vexpress,config-bridge
+
+patternProperties:
+  'clk[0-9]*$':
+    type: object
+    description:
+      clocks
+
+    properties:
+      compatible:
+        const: arm,vexpress-osc
+
+      arm,vexpress-sysreg,func:
+        description: clock specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 1
+          - description: clock number
+
+      freq-range:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: minimal clock frequency
+          - description: maximum clock frequency
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+      - "#clock-cells"
+
+  "^volt-.+$":
+    $ref: /schemas/regulator/regulator.yaml#
+    properties:
+      compatible:
+        const: arm,vexpress-volt
+
+      arm,vexpress-sysreg,func:
+        description: regulator specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 2
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    unevaluatedProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^amp-.+$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-amp
+
+      arm,vexpress-sysreg,func:
+        description: current sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 3
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^temp-.+$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-temp
+
+      arm,vexpress-sysreg,func:
+        description: temperature sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 4
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^reset[0-9]*$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-reset
+
+      arm,vexpress-sysreg,func:
+        description: reset specifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 5
+          - description: reset device number
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^power-.+$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-power
+
+      arm,vexpress-sysreg,func:
+        description: power sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - const: 12
+          - description: device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+  "^energy(-.+)?$":
+    type: object
+    properties:
+      compatible:
+        const: arm,vexpress-energy
+
+      arm,vexpress-sysreg,func:
+        description: energy sensor identifier
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        oneOf:
+          - items:
+              - const: 13
+              - description: device number
+          - items:
+              - const: 13
+              - description: device number
+              - const: 13
+              - description: second device number
+
+      label:
+        maxItems: 1
+
+    additionalProperties: false
+    required:
+      - compatible
+      - arm,vexpress-sysreg,func
+
+examples:
+  - |
+    mcc {
+        compatible = "arm,vexpress,config-bus";
+        arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+        clk0 {
+            compatible = "arm,vexpress-osc";
+            arm,vexpress-sysreg,func = <1 0>;
+            #clock-cells = <0>;
+        };
+
+        energy {
+            compatible = "arm,vexpress-energy";
+            arm,vexpress-sysreg,func = <13 0>, <13 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
deleted file mode 100644
index 50095802fb4a..000000000000
--- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+++ /dev/null
@@ -1,103 +0,0 @@
-ARM Versatile Express system registers
---------------------------------------
-
-This is a system control registers block, providing multiple low level
-platform functions like board detection and identification, software
-interrupt generation, MMC and NOR Flash control etc.
-
-Required node properties:
-- compatible value : = "arm,vexpress,sysreg";
-- reg : physical base address and the size of the registers window
-
-Deprecated properties, replaced by GPIO subnodes (see below):
-- gpio-controller : specifies that the node is a GPIO controller
-- #gpio-cells : size of the GPIO specifier, should be 2:
-  - first cell is the pseudo-GPIO line number:
-    0 - MMC CARDIN
-    1 - MMC WPROT
-    2 - NOR FLASH WPn
-  - second cell can take standard GPIO flags (currently ignored).
-
-Control registers providing pseudo-GPIO lines must be represented
-by subnodes, each of them requiring the following properties:
-- compatible value : one of
-			"arm,vexpress-sysreg,sys_led"
-			"arm,vexpress-sysreg,sys_mci"
-			"arm,vexpress-sysreg,sys_flash"
-- gpio-controller : makes the node a GPIO controller
-- #gpio-cells : size of the GPIO specifier, must be 2:
-  - first cell is the function number:
-    - for sys_led : 0..7 = LED 0..7
-    - for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT
-    - for sys_flash : 0 = NOR FLASH WPn
-  - second cell can take standard GPIO flags (currently ignored).
-
-Example:
-	v2m_sysreg: sysreg@10000000 {
- 		compatible = "arm,vexpress-sysreg";
- 		reg = <0x10000000 0x1000>;
-
-		v2m_led_gpios: sys_led@8 {
-			compatible = "arm,vexpress-sysreg,sys_led";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		v2m_mmc_gpios: sys_mci@48 {
-			compatible = "arm,vexpress-sysreg,sys_mci";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		v2m_flash_gpios: sys_flash@4c {
-			compatible = "arm,vexpress-sysreg,sys_flash";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
- 	};
-
-This block also can also act a bridge to the platform's configuration
-bus via "system control" interface, addressing devices with site number,
-position in the board stack, config controller, function and device
-numbers - see motherboard's TRM for more details. All configuration
-controller accessible via this interface must reference the sysreg
-node via "arm,vexpress,config-bridge" phandle and define appropriate
-topology properties - see main vexpress node documentation for more
-details. Each child of such node describes one function and must
-define the following properties:
-- compatible value : must be one of (corresponding to the TRM):
-	"arm,vexpress-amp"
-	"arm,vexpress-dvimode"
-	"arm,vexpress-energy"
-	"arm,vexpress-muxfpga"
-	"arm,vexpress-osc"
-	"arm,vexpress-power"
-	"arm,vexpress-reboot"
-	"arm,vexpress-reset"
-	"arm,vexpress-scc"
-	"arm,vexpress-shutdown"
-	"arm,vexpress-temp"
-	"arm,vexpress-volt"
-- arm,vexpress-sysreg,func : must contain a set of two cells long groups:
-  - first cell of each group defines the function number
-    (eg. 1 for clock generator, 2 for voltage regulators etc.)
-  - second cell of each group defines device number (eg. osc 0,
-    osc 1 etc.)
-  - some functions (eg. energy meter, with its 64 bit long counter)
-    are using more than one function/device number pair
-
-Example:
-	mcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		osc@0 {
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-		};
-
-		energy@0 {
-			compatible = "arm,vexpress-energy";
-			arm,vexpress-sysreg,func = <13 0>, <13 1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml b/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml
new file mode 100644
index 000000000000..be6e3b542569
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/vexpress-sysreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Express system registers
+
+maintainers:
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  This is a system control registers block, providing multiple low level
+  platform functions like board detection and identification, software
+  interrupt generation, MMC and NOR Flash control, etc.
+
+properties:
+  compatible:
+    const: arm,vexpress-sysreg
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  gpio-controller:
+    deprecated: true
+
+  "#gpio-cells":
+    deprecated: true
+    const: 2
+
+additionalProperties: false
+
+patternProperties:
+  '^gpio@[0-9a-f]+$':
+    type: object
+    additionalProperties: false
+    description:
+      GPIO children
+
+    properties:
+      compatible:
+        enum:
+          - arm,vexpress-sysreg,sys_led
+          - arm,vexpress-sysreg,sys_mci
+          - arm,vexpress-sysreg,sys_flash
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+        description: |
+          The first cell is the function number:
+          for sys_led : 0..7 = LED 0..7
+          for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT
+          for sys_flash : 0 = NOR FLASH WPn
+          The second cell can take standard GPIO flags.
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - gpio-controller
+      - "#gpio-cells"
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    sysreg@0 {
+        compatible = "arm,vexpress-sysreg";
+        reg = <0x00000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0 0x1000>;
+
+        v2m_led_gpios: gpio@8 {
+            compatible = "arm,vexpress-sysreg,sys_led";
+            reg = <0x008 4>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/arm/vt8500.yaml b/Documentation/devicetree/bindings/arm/vt8500.yaml
index 7b762bfc11e7..5d5ad5a60451 100644
--- a/Documentation/devicetree/bindings/arm/vt8500.yaml
+++ b/Documentation/devicetree/bindings/arm/vt8500.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/vt8500.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: VIA/Wondermedia VT8500 Platforms Device Tree Bindings
+title: VIA/Wondermedia VT8500 Platforms
 
 maintainers:
   - Tony Prisk <linux@prisktech.co.nz>
diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt
index db5c56db30ec..61d77acbeb5e 100644
--- a/Documentation/devicetree/bindings/arm/xen.txt
+++ b/Documentation/devicetree/bindings/arm/xen.txt
@@ -7,15 +7,17 @@ the following properties:
 	compatible = "xen,xen-<version>", "xen,xen";
   where <version> is the version of the Xen ABI of the platform.
 
-- reg: specifies the base physical address and size of a region in
-  memory where the grant table should be mapped to, using an
-  HYPERVISOR_memory_op hypercall. The memory region is large enough to map
-  the whole grant table (it is larger or equal to gnttab_max_grant_frames()).
-  This property is unnecessary when booting Dom0 using ACPI.
+- reg: specifies the base physical address and size of the regions in memory
+  where the special resources should be mapped to, using an HYPERVISOR_memory_op
+  hypercall.
+  Region 0 is reserved for mapping grant table, it must be always present.
+  The memory region is large enough to map the whole grant table (it is larger
+  or equal to gnttab_max_grant_frames()).
+  Regions 1...N are extended regions (unused address space) for mapping foreign
+  GFNs and grants, they might be absent if there is nothing to expose.
 
 - interrupts: the interrupt used by Xen to inject event notifications.
   A GIC node is also required.
-  This property is unnecessary when booting Dom0 using ACPI.
 
 To support UEFI on Xen ARM virtual platforms, Xen populates the FDT "uefi" node
 under /hypervisor with following parameters:
diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/arm/xilinx.yaml
index f52c7e8ce654..969cfe6dc434 100644
--- a/Documentation/devicetree/bindings/arm/xilinx.yaml
+++ b/Documentation/devicetree/bindings/arm/xilinx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/arm/xilinx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx Zynq Platforms Device Tree Bindings
+title: Xilinx Zynq Platforms
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
@@ -87,6 +87,7 @@ properties:
               - xlnx,zynqmp-zcu102-revA
               - xlnx,zynqmp-zcu102-revB
               - xlnx,zynqmp-zcu102-rev1.0
+              - xlnx,zynqmp-zcu102-rev1.1
           - const: xlnx,zynqmp-zcu102
           - const: xlnx,zynqmp
 
@@ -115,6 +116,22 @@ properties:
           - const: xlnx,zynqmp-zcu111
           - const: xlnx,zynqmp
 
+      - description: Xilinx Kria SOMs
+        items:
+          - const: xlnx,zynqmp-sm-k26-rev1
+          - const: xlnx,zynqmp-sm-k26-revB
+          - const: xlnx,zynqmp-sm-k26-revA
+          - const: xlnx,zynqmp-sm-k26
+          - const: xlnx,zynqmp
+
+      - description: Xilinx Kria SOMs (starter)
+        items:
+          - const: xlnx,zynqmp-smk-k26-rev1
+          - const: xlnx,zynqmp-smk-k26-revB
+          - const: xlnx,zynqmp-smk-k26-revA
+          - const: xlnx,zynqmp-smk-k26
+          - const: xlnx,zynqmp
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt
deleted file mode 100644
index bfb6da0281ec..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Binding for CEVA AHCI SATA Controller
-
-Required properties:
-  - reg: Physical base address and size of the controller's register area.
-  - compatible: Compatibility string. Must be 'ceva,ahci-1v84'.
-  - clocks: Input clock specifier. Refer to common clock bindings.
-  - interrupts: Interrupt specifier. Refer to interrupt binding.
-  - ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0.
-  - ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
-			CINMP : COMINIT Negate Minimum Period.
-			CIBGN : COMINIT Burst Gap Nominal.
-			CIBGMX: COMINIT Burst Gap Maximum.
-			CIBGMN: COMINIT Burst Gap Minimum.
-  - ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0.
-  - ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
-			CWBGMN: COMWAKE Burst Gap Minimum.
-			CWBGMX: COMWAKE Burst Gap Maximum.
-			CWBGN: COMWAKE Burst Gap Nominal.
-			CWNMP: COMWAKE Negate Minimum Period.
-  - ceva,p0-burst-params: Burst timing value for COM parameter for port 0.
-  - ceva,p1-burst-params: Burst timing value for COM parameter for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
-			BMX: COM Burst Maximum.
-			BNM: COM Burst Nominal.
-			SFD: Signal Failure Detection value.
-			PTST: Partial to Slumber timer value.
-  - ceva,p0-retry-params: Retry interval timing value for port 0.
-  - ceva,p1-retry-params: Retry interval timing value for port 1.
-			The fields for the above parameter must be as shown below:
-			ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
-			RIT:  Retry Interval Timer.
-			RCT:  Rate Change Timer.
-
-Optional properties:
-  - ceva,broken-gen2: limit to gen1 speed instead of gen2.
-  - phys: phandle for the PHY device
-  - resets: phandle to the reset controller for the SATA IP
-
-Examples:
-	ahci@fd0c0000 {
-		compatible = "ceva,ahci-1v84";
-		reg = <0xfd0c0000 0x200>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 133 4>;
-		clocks = <&clkc SATA_CLK_ID>;
-		ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-		ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-		ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-		ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
-
-		ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-		ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-		ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-		ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
-		ceva,broken-gen2;
-		phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
-		resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
-	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-common.yaml b/Documentation/devicetree/bindings/ata/ahci-common.yaml
new file mode 100644
index 000000000000..7fdf40954a4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-common.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ahci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Serial ATA AHCI controllers
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+  - Damien Le Moal <damien.lemoal@opensource.wdc.com>
+
+description:
+  This document defines device tree properties for a common AHCI SATA
+  controller implementation. It's hardware interface is supposed to
+  conform to the technical standard defined by Intel (see Serial ATA
+  Advanced Host Controller Interface specification for details). The
+  document doesn't constitute a DT-node binding by itself but merely
+  defines a set of common properties for the AHCI-compatible devices.
+
+select: false
+
+allOf:
+  - $ref: sata-common.yaml#
+
+properties:
+  reg:
+    description:
+      Generic AHCI registers space conforming to the Serial ATA AHCI
+      specification.
+
+  reg-names:
+    description: CSR space IDs
+    contains:
+      const: ahci
+
+  interrupts:
+    description:
+      Generic AHCI state change interrupt. Can be implemented either as a
+      single line attached to the controller or as a set of the signals
+      indicating the particular port events.
+    minItems: 1
+    maxItems: 32
+
+  ahci-supply:
+    description: Power regulator for AHCI controller
+
+  target-supply:
+    description: Power regulator for SATA target device
+
+  phy-supply:
+    description: Power regulator for SATA PHY
+
+  phys:
+    description: Reference to the SATA PHY node
+    maxItems: 1
+
+  phy-names:
+    const: sata-phy
+
+  hba-cap:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bitfield of the HBA generic platform capabilities like Staggered
+      Spin-up or Mechanical Presence Switch support. It can be used to
+      appropriately initialize the HWinit fields of the HBA CAP register
+      in case if the system firmware hasn't done it.
+
+  ports-implemented:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Mask that indicates which ports the HBA supports. Useful if PI is not
+      programmed by the BIOS, which is true for some embedded SoC's.
+
+patternProperties:
+  "^sata-port@[0-9a-f]+$":
+    $ref: '#/$defs/ahci-port'
+    description:
+      It is optionally possible to describe the ports as sub-nodes so
+      to enable each port independently when dealing with multiple PHYs.
+
+required:
+  - reg
+  - interrupts
+
+additionalProperties: true
+
+$defs:
+  ahci-port:
+    $ref: /schemas/ata/sata-common.yaml#/$defs/sata-port
+
+    properties:
+      reg:
+        description:
+          AHCI SATA port identifier. By design AHCI controller can't have
+          more than 32 ports due to the CAP.NP fields and PI register size
+          constraints.
+        minimum: 0
+        maximum: 31
+
+      phys:
+        description: Individual AHCI SATA port PHY
+        maxItems: 1
+
+      phy-names:
+        description: AHCI SATA port PHY ID
+        const: sata-phy
+
+      target-supply:
+        description: Power regulator for SATA port target device
+
+      hba-port-cap:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Bitfield of the HBA port-specific platform capabilities like Hot
+          plugging, eSATA, FIS-based Switching, etc (see AHCI specification
+          for details). It can be used to initialize the HWinit fields of
+          the PxCMD register in case if the system firmware hasn't done it.
+
+    required:
+      - reg
+
+...
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
deleted file mode 100644
index 77091a277642..000000000000
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-* AHCI SATA Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-It is possible, but not required, to represent each port as a sub-node.
-It allows to enable each port independently when dealing with multiple
-PHYs.
-
-Required properties:
-- compatible        : compatible string, one of:
-  - "brcm,iproc-ahci"
-  - "hisilicon,hisi-ahci"
-  - "cavium,octeon-7130-ahci"
-  - "ibm,476gtr-ahci"
-  - "marvell,armada-380-ahci"
-  - "marvell,armada-3700-ahci"
-  - "snps,dwc-ahci"
-  - "snps,spear-ahci"
-  - "generic-ahci"
-- interrupts        : <interrupt mapping for SATA IRQ>
-- reg               : <registers mapping>
-
-Please note that when using "generic-ahci" you must also specify a SoC specific
-compatible:
-	compatible = "manufacturer,soc-model-ahci", "generic-ahci";
-
-Optional properties:
-- dma-coherent      : Present if dma operations are coherent
-- clocks            : a list of phandle + clock specifier pairs
-- resets            : a list of phandle + reset specifier pairs
-- target-supply     : regulator for SATA target power
-- phy-supply        : regulator for PHY power
-- phys              : reference to the SATA PHY node
-- phy-names         : must be "sata-phy"
-- ahci-supply       : regulator for AHCI controller
-- ports-implemented : Mask that indicates which ports that the HBA supports
-		      are available for software to use. Useful if PORTS_IMPL
-		      is not programmed by the BIOS, which is true with
-		      some embedded SOC's.
-
-Required properties when using sub-nodes:
-- #address-cells    : number of cells to encode an address
-- #size-cells       : number of cells representing the size of an address
-
-Sub-nodes required properties:
-- reg		    : the port number
-And at least one of the following properties:
-- phys		    : reference to the SATA PHY node
-- target-supply     : regulator for SATA target power
-
-Examples:
-        sata@ffe08000 {
-		compatible = "snps,spear-ahci";
-		reg = <0xffe08000 0x1000>;
-		interrupts = <115>;
-        };
-
-With sub-nodes:
-	sata@f7e90000 {
-		compatible = "marvell,berlin2q-achi", "generic-ahci";
-		reg = <0xe90000 0x1000>;
-		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&chip CLKID_SATA>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sata0: sata-port@0 {
-			reg = <0>;
-			phys = <&sata_phy 0>;
-			target-supply = <&reg_sata0>;
-		};
-
-		sata1: sata-port@1 {
-			reg = <1>;
-			phys = <&sata_phy 1>;
-			target-supply = <&reg_sata1>;;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.yaml b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
new file mode 100644
index 000000000000..358617115bb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ahci-platform.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AHCI SATA Controller
+
+description: |
+  SATA nodes are defined to describe on-chip Serial ATA controllers.
+  Each SATA controller should have its own node.
+
+  It is possible, but not required, to represent each port as a sub-node.
+  It allows to enable each port independently when dealing with multiple
+  PHYs.
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+  - Jens Axboe <axboe@kernel.dk>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,iproc-ahci
+          - cavium,octeon-7130-ahci
+          - hisilicon,hisi-ahci
+          - ibm,476gtr-ahci
+          - marvell,armada-3700-ahci
+          - marvell,armada-8k-ahci
+          - marvell,berlin2q-ahci
+          - socionext,uniphier-pro4-ahci
+          - socionext,uniphier-pxs2-ahci
+          - socionext,uniphier-pxs3-ahci
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,iproc-ahci
+              - marvell,armada-8k-ahci
+              - marvell,berlin2-ahci
+              - marvell,berlin2q-ahci
+              - socionext,uniphier-pro4-ahci
+              - socionext,uniphier-pxs2-ahci
+              - socionext,uniphier-pxs3-ahci
+          - const: generic-ahci
+      - enum:
+          - cavium,octeon-7130-ahci
+          - hisilicon,hisi-ahci
+          - ibm,476gtr-ahci
+          - marvell,armada-3700-ahci
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+patternProperties:
+  "^sata-port@[0-9a-f]+$":
+    $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port
+
+    anyOf:
+      - required: [ phys ]
+      - required: [ target-supply ]
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: ahci-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro4-ahci
+    then:
+      properties:
+        resets:
+          items:
+            - description: reset line for the parent
+            - description: reset line for the glue logic
+            - description: reset line for the controller
+      required:
+        - resets
+    else:
+      if:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - socionext,uniphier-pxs2-ahci
+                - socionext,uniphier-pxs3-ahci
+      then:
+        properties:
+          resets:
+            items:
+              - description: reset for the glue logic
+              - description: reset for the controller
+        required:
+          - resets
+      else:
+        properties:
+          resets:
+            maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@ffe08000 {
+        compatible = "snps,spear-ahci";
+        reg = <0xffe08000 0x1000>;
+        interrupts = <115>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/berlin2q.h>
+    #include <dt-bindings/ata/ahci.h>
+
+    sata@f7e90000 {
+        compatible = "marvell,berlin2q-ahci", "generic-ahci";
+        reg = <0xf7e90000 0x1000>;
+        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&chip CLKID_SATA>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hba-cap = <HBA_SMPS>;
+
+        sata0: sata-port@0 {
+            reg = <0>;
+
+            phys = <&sata_phy 0>;
+            target-supply = <&reg_sata0>;
+
+            hba-port-cap = <(HBA_PORT_FBSCP | HBA_PORT_ESP)>;
+        };
+
+        sata1: sata-port@1 {
+            reg = <1>;
+
+            phys = <&sata_phy 1>;
+            target-supply = <&reg_sata1>;
+
+            hba-port-cap = <(HBA_PORT_HPCP | HBA_PORT_MPSP | HBA_PORT_FBSCP)>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.yaml b/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.yaml
index cb530b46beff..2011bd03cdcd 100644
--- a/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.yaml
+++ b/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/ata/allwinner,sun4i-a10-ahci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 AHCI SATA Controller bindings
+title: Allwinner A10 AHCI SATA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/ata/allwinner,sun8i-r40-ahci.yaml b/Documentation/devicetree/bindings/ata/allwinner,sun8i-r40-ahci.yaml
index e6b42a113ff1..a2afe2ad6063 100644
--- a/Documentation/devicetree/bindings/ata/allwinner,sun8i-r40-ahci.yaml
+++ b/Documentation/devicetree/bindings/ata/allwinner,sun8i-r40-ahci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/ata/allwinner,sun8i-r40-ahci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner R40 AHCI SATA Controller bindings
+title: Allwinner R40 AHCI SATA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/ata/ata-generic.yaml b/Documentation/devicetree/bindings/ata/ata-generic.yaml
new file mode 100644
index 000000000000..0697927f3d7e
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ata-generic.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ata-generic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Parallel ATA Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Generic Parallel ATA controllers supporting PIO modes only.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,vexpress-cf
+          - fsl,mpc8349emitx-pata
+      - const: ata-generic
+
+  reg:
+    items:
+      - description: Command interface registers
+      - description: Control interface registers
+
+  reg-shift:
+    enum: [ 1, 2 ]
+
+  interrupts:
+    maxItems: 1
+
+  ata-generic,use16bit:
+    type: boolean
+    description: Use 16-bit accesses instead of 32-bit for data transfers
+
+  pio-mode:
+    description: Maximum ATA PIO transfer mode
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 6
+    default: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    compact-flash@1a000 {
+        compatible = "arm,vexpress-cf", "ata-generic";
+        reg = <0x1a000 0x100>,
+              <0x1a100 0xf00>;
+        reg-shift = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml
new file mode 100644
index 000000000000..9b7ca4759bd7
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/baikal,bt1-ahci.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/baikal,bt1-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 SoC AHCI SATA controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  AHCI SATA controller embedded into the Baikal-T1 SoC is based on the
+  DWC AHCI SATA v4.10a IP-core.
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+
+properties:
+  compatible:
+    const: baikal,bt1-ahci
+
+  clocks:
+    items:
+      - description: Peripheral APB bus clock
+      - description: Application AXI BIU clock
+      - description: SATA Ports reference clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: aclk
+      - const: ref
+
+  resets:
+    items:
+      - description: Application AXI BIU domain reset
+      - description: SATA Ports clock domain reset
+
+  reset-names:
+    items:
+      - const: arst
+      - const: ref
+
+  ports-implemented:
+    maximum: 0x3
+
+patternProperties:
+  "^sata-port@[0-1]$":
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+
+      snps,tx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Due to having AXI3 bus interface utilized the maximum Tx DMA
+          transaction size can't exceed 16 beats (AxLEN[3:0]).
+        enum: [ 1, 2, 4, 8, 16 ]
+
+      snps,rx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Due to having AXI3 bus interface utilized the maximum Rx DMA
+          transaction size can't exceed 16 beats (AxLEN[3:0]).
+        enum: [ 1, 2, 4, 8, 16 ]
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@1f050000 {
+      compatible = "baikal,bt1-ahci";
+      reg = <0x1f050000 0x2000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      interrupts = <0 64 4>;
+
+      clocks = <&ccu_sys 1>, <&ccu_axi 2>, <&sata_ref_clk>;
+      clock-names = "pclk", "aclk", "ref";
+
+      resets = <&ccu_axi 2>, <&ccu_sys 0>;
+      reset-names = "arst", "ref";
+
+      ports-implemented = <0x3>;
+
+      sata-port@0 {
+        reg = <0>;
+
+        snps,tx-ts-max = <4>;
+        snps,rx-ts-max = <4>;
+      };
+
+      sata-port@1 {
+        reg = <1>;
+
+        snps,tx-ts-max = <4>;
+        snps,rx-ts-max = <4>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
deleted file mode 100644
index b9ae4ce4a0a0..000000000000
--- a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* Broadcom SATA3 AHCI Controller
-
-SATA nodes are defined to describe on-chip Serial ATA controllers.
-Each SATA controller should have its own node.
-
-Required properties:
-- compatible         : should be one or more of
-			"brcm,bcm7216-ahci"
-			"brcm,bcm7425-ahci"
-			"brcm,bcm7445-ahci"
-			"brcm,bcm-nsp-ahci"
-			"brcm,sata3-ahci"
-			"brcm,bcm63138-ahci"
-- reg                : register mappings for AHCI and SATA_TOP_CTRL
-- reg-names          : "ahci" and "top-ctrl"
-- interrupts         : interrupt mapping for SATA IRQ
-
-Optional properties:
-
-- reset: for "brcm,bcm7216-ahci" must be a valid reset phandle
-  pointing to the RESCAL reset controller provider node.
-- reset-names: for "brcm,bcm7216-ahci", must be "rescal".
-
-Also see ahci-platform.txt.
-
-Example:
-
-	sata@f045a000 {
-		compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
-		reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
-		reg-names = "ahci", "top-ctrl";
-		interrupts = <0 30 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		sata0: sata-port@0 {
-			reg = <0>;
-			phys = <&sata_phy 0>;
-		};
-
-		sata1: sata-port@1 {
-			reg = <1>;
-			phys = <&sata_phy 1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
new file mode 100644
index 000000000000..fe7f091e744f
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/brcm,sata-brcm.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/brcm,sata-brcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom SATA3 AHCI Controller
+
+description:
+  SATA nodes are defined to describe on-chip Serial ATA controllers.
+  Each SATA controller should have its own node.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7216-ahci
+              - brcm,bcm7445-ahci
+              - brcm,bcm7425-ahci
+              - brcm,bcm63138-ahci
+          - const: brcm,sata3-ahci
+      - items:
+          - const: brcm,bcm-nsp-ahci
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ahci
+      - const: top-ctrl
+
+  interrupts:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,bcm7216-ahci
+          - brcm,bcm63138-ahci
+then:
+  properties:
+    resets:
+      maxItems: 1
+    reset-names:
+      enum:
+        - rescal
+        - ahci
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sata@f045a000 {
+        compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+        reg = <0xf045a000 0xa9c>, <0xf0458040 0x24>;
+        reg-names = "ahci", "top-ctrl";
+        interrupts = <0 30 0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sata0: sata-port@0 {
+            reg = <0>;
+            phys = <&sata_phy 0>;
+        };
+
+        sata1: sata-port@1 {
+            reg = <1>;
+            phys = <&sata_phy 1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
new file mode 100644
index 000000000000..9b31f864e071
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ceva,ahci-1v84.yaml
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/ceva,ahci-1v84.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ceva AHCI SATA Controller
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@xilinx.com>
+
+description: |
+  The Ceva SATA controller mostly conforms to the AHCI interface with some
+  special extensions to add functionality, is a high-performance dual-port
+  SATA host controller with an AHCI compliant command layer which supports
+  advanced features such as native command queuing and frame information
+  structure (FIS) based switching for systems employing port multipliers.
+
+properties:
+  compatible:
+    const: ceva,ahci-1v84
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  ceva,p0-cominit-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMINIT parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+    items:
+      - description: CINMP - COMINIT Negate Minimum Period.
+      - description: CIBGN - COMINIT Burst Gap Nominal.
+      - description: CIBGMX - COMINIT Burst Gap Maximum.
+      - description: CIBGMN - COMINIT Burst Gap Minimum.
+
+  ceva,p0-comwake-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMWAKE parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+    items:
+      - description: CWBGMN - COMWAKE Burst Gap Minimum.
+      - description: CWBGMX - COMWAKE Burst Gap Maximum.
+      - description: CWBGN - COMWAKE Burst Gap Nominal.
+      - description: CWNMP - COMWAKE Negate Minimum Period.
+
+  ceva,p0-burst-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Burst timing value for COM parameter for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+    items:
+      - description: BMX - COM Burst Maximum.
+      - description: BNM - COM Burst Nominal.
+      - description: SFD - Signal Failure Detection value.
+      - description: PTST - Partial to Slumber timer value.
+
+  ceva,p0-retry-params:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description: |
+      Retry interval timing value for port 0.
+      The fields for the above parameter must be as shown below:-
+      ceva,p0-retry-params = /bits/ 16 <RIT RCT>;
+    items:
+      - description: RIT - Retry Interval Timer.
+      - description: RCT - Rate Change Timer.
+
+  ceva,p1-cominit-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMINIT parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>;
+    items:
+      - description: CINMP - COMINIT Negate Minimum Period.
+      - description: CIBGN - COMINIT Burst Gap Nominal.
+      - description: CIBGMX - COMINIT Burst Gap Maximum.
+      - description: CIBGMN - COMINIT Burst Gap Minimum.
+
+  ceva,p1-comwake-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      OOB timing value for COMWAKE parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>;
+    items:
+      - description: CWBGMN - COMWAKE Burst Gap Minimum.
+      - description: CWBGMX - COMWAKE Burst Gap Maximum.
+      - description: CWBGN - COMWAKE Burst Gap Nominal.
+      - description: CWNMP - COMWAKE Negate Minimum Period.
+
+  ceva,p1-burst-params:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: |
+      Burst timing value for COM parameter for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,p1-burst-params = /bits/ 8 <BMX BNM SFD PTST>;
+    items:
+      - description: BMX - COM Burst Maximum.
+      - description: BNM - COM Burst Nominal.
+      - description: SFD - Signal Failure Detection value.
+      - description: PTST - Partial to Slumber timer value.
+
+  ceva,p1-retry-params:
+    $ref: /schemas/types.yaml#/definitions/uint16-array
+    description: |
+      Retry interval timing value for port 1.
+      The fields for the above parameter must be as shown below:-
+      ceva,pN-retry-params = /bits/ 16 <RIT RCT>;
+    items:
+      - description: RIT - Retry Interval Timer.
+      - description: RCT - Rate Change Timer.
+
+  ceva,broken-gen2:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      limit to gen1 speed instead of gen2.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: sata-phy
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - ceva,p0-cominit-params
+  - ceva,p0-comwake-params
+  - ceva,p0-burst-params
+  - ceva,p0-retry-params
+  - ceva,p1-cominit-params
+  - ceva,p1-comwake-params
+  - ceva,p1-burst-params
+  - ceva,p1-retry-params
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/phy/phy.h>
+
+    sata: ahci@fd0c0000 {
+        compatible = "ceva,ahci-1v84";
+        reg = <0xfd0c0000 0x200>;
+        interrupt-parent = <&gic>;
+        interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&zynqmp_clk SATA_REF>;
+        ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+        ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+        ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+        ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+        ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+        ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+        ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+        ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
+        ceva,broken-gen2;
+        phys = <&psgtr 1 PHY_TYPE_SATA 1 1>;
+        resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
+    };
diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
deleted file mode 100644
index 1c3d3cc70051..000000000000
--- a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Cortina Systems Gemini SATA Bridge
-
-The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
-takes two Faraday Technology FTIDE010 PATA controllers and bridges
-them in different configurations to two SATA ports.
-
-Required properties:
-- compatible: should be
-  "cortina,gemini-sata-bridge"
-- reg: registers and size for the block
-- resets: phandles to the reset lines for both SATA bridges
-- reset-names: must be "sata0", "sata1"
-- clocks: phandles to the compulsory peripheral clocks
-- clock-names: must be "SATA0_PCLK", "SATA1_PCLK"
-- syscon: a phandle to the global Gemini system controller
-- cortina,gemini-ata-muxmode: tell the desired multiplexing mode for
-  the ATA controller and SATA bridges. Values 0..3:
-  Mode 0: ata0 master <-> sata0
-          ata1 master <-> sata1
-          ata0 slave interface brought out on IDE pads
-  Mode 1: ata0 master <-> sata0
-          ata1 master <-> sata1
-          ata1 slave interface brought out on IDE pads
-  Mode 2: ata1 master <-> sata1
-          ata1 slave  <-> sata0
-          ata0 master and slave interfaces brought out
-               on IDE pads
-  Mode 3: ata0 master <-> sata0
-          ata0 slave  <-> sata1
-          ata1 master and slave interfaces brought out
-               on IDE pads
-
-Optional boolean properties:
-- cortina,gemini-enable-ide-pins: enables the PATA to IDE connection.
-  The muxmode setting decides whether ATA0 or ATA1 is brought out,
-  and whether master, slave or both interfaces get brought out.
-- cortina,gemini-enable-sata-bridge: enables the PATA to SATA bridge
-  inside the Gemnini SoC. The Muxmode decides what PATA blocks will
-  be muxed out and how.
-
-Example:
-
-sata: sata@46000000 {
-	compatible = "cortina,gemini-sata-bridge";
-	reg = <0x46000000 0x100>;
-	resets = <&rcon 26>, <&rcon 27>;
-	reset-names = "sata0", "sata1";
-	clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
-		 <&gcc GEMINI_CLK_GATE_SATA1>;
-	clock-names = "SATA0_PCLK", "SATA1_PCLK";
-	syscon = <&syscon>;
-	cortina,gemini-ata-muxmode = <3>;
-	cortina,gemini-enable-ide-pins;
-	cortina,gemini-enable-sata-bridge;
-};
diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
new file mode 100644
index 000000000000..529093666508
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/cortina,gemini-sata-bridge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cortina Systems Gemini SATA Bridge
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+    The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that
+    takes two Faraday Technology FTIDE010 PATA controllers and bridges
+    them in different configurations to two SATA ports.
+
+properties:
+  compatible:
+    const: cortina,gemini-sata-bridge
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+    description: phandles to the reset lines for both SATA bridges
+
+  reset-names:
+    items:
+      - const: sata0
+      - const: sata1
+
+  clocks:
+    maxItems: 2
+    description: phandles to the compulsory peripheral clocks
+
+  clock-names:
+    items:
+      - const: SATA0_PCLK
+      - const: SATA1_PCLK
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the global Gemini system controller
+
+  cortina,gemini-ata-muxmode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0
+      - 1
+      - 2
+      - 3
+    description: |
+      Tell the desired multiplexing mode for the ATA controller and SATA
+      bridges.
+      Mode 0: ata0 master <-> sata0
+              ata1 master <-> sata1
+              ata0 slave interface brought out on IDE pads
+      Mode 1: ata0 master <-> sata0
+              ata1 master <-> sata1
+              ata1 slave interface brought out on IDE pads
+      Mode 2: ata1 master <-> sata1
+              ata1 slave  <-> sata0
+              ata0 master and slave interfaces brought out on IDE pads
+      Mode 3: ata0 master <-> sata0
+              ata0 slave  <-> sata1
+              ata1 master and slave interfaces brought out on IDE pads
+
+  cortina,gemini-enable-ide-pins:
+    type: boolean
+    description: Enables the PATA to IDE connection.
+      The muxmode setting decides whether ATA0 or ATA1 is brought out,
+      and whether master, slave or both interfaces get brought out.
+
+  cortina,gemini-enable-sata-bridge:
+    type: boolean
+    description: Enables the PATA to SATA bridge inside the Gemnini SoC.
+      The Muxmode decides what PATA blocks will be muxed out and how.
+
+required:
+  - clocks
+  - clock-names
+  - cortina,gemini-ata-muxmode
+  - resets
+  - reset-names
+  - compatible
+  - reg
+  - syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    sata@46000000 {
+      compatible = "cortina,gemini-sata-bridge";
+      reg = <0x46000000 0x100>;
+      resets = <&rcon 26>, <&rcon 27>;
+      reset-names = "sata0", "sata1";
+      clocks = <&gcc GEMINI_CLK_GATE_SATA0>,
+               <&gcc GEMINI_CLK_GATE_SATA1>;
+      clock-names = "SATA0_PCLK", "SATA1_PCLK";
+      syscon = <&syscon>;
+      cortina,gemini-ata-muxmode = <3>;
+      cortina,gemini-enable-ide-pins;
+      cortina,gemini-enable-sata-bridge;
+    };
diff --git a/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
index 52e18600ecff..378692010c56 100644
--- a/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
+++ b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml
@@ -35,6 +35,7 @@ required:
 
 allOf:
   - $ref: pata-common.yaml#
+  - $ref: /schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
index c060c7914cae..fe0909554790 100644
--- a/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
+++ b/Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/ata/renesas,rcar-sata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas R-Car Serial-ATA Interface
 
@@ -26,6 +26,7 @@ properties:
       - items:
           - enum:
               - renesas,sata-r8a774b1     # RZ/G2N
+              - renesas,sata-r8a774e1     # RZ/G2H
               - renesas,sata-r8a7795      # R-Car H3
               - renesas,sata-r8a77965     # R-Car M3-N
           - const: renesas,rcar-gen3-sata # generic R-Car Gen3 or RZ/G2
diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml
index 7ac77b1c5850..58c9342b9925 100644
--- a/Documentation/devicetree/bindings/ata/sata-common.yaml
+++ b/Documentation/devicetree/bindings/ata/sata-common.yaml
@@ -31,22 +31,27 @@ properties:
   "#size-cells":
     const: 0
 
+  dma-coherent: true
+
 patternProperties:
   "^sata-port@[0-9a-e]$":
+    $ref: '#/$defs/sata-port'
     description: |
       DT nodes for ports connected on the SATA host. The SATA port
       nodes will be named "sata-port".
+
+additionalProperties: true
+
+$defs:
+  sata-port:
     type: object
 
     properties:
       reg:
         minimum: 0
-        maximum: 14
         description:
-          The ID number of the drive port SATA can potentially use a port
-          multiplier making it possible to connect up to 15 disks to a single
-          SATA port.
-
-additionalProperties: true
+          The ID number of the SATA port. Aside with being directly used,
+          each port can have a Port Multiplier attached thus allowing to
+          access more than one drive by means of a single SATA port.
 
 ...
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.yaml b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
index ce75d77e9289..f23f26a8f21c 100644
--- a/Documentation/devicetree/bindings/ata/sata_highbank.yaml
+++ b/Documentation/devicetree/bindings/ata/sata_highbank.yaml
@@ -51,6 +51,8 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 8
+    items:
+      maxItems: 2
 
   calxeda,tx-atten:
     description: |
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
new file mode 100644
index 000000000000..c1457910520b
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci-common.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/snps,dwc-ahci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller properties
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree schema for the generic Synopsys DWC
+  AHCI controller properties.
+
+select: false
+
+allOf:
+  - $ref: ahci-common.yaml#
+
+properties:
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Basic DWC AHCI SATA clock sources like application AXI/AHB BIU clock,
+      PM-alive clock, RxOOB detection clock, embedded PHYs reference (Rx/Tx)
+      clock, etc.
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      oneOf:
+        - description: Application APB/AHB/AXI BIU clock
+          enum:
+            - pclk
+            - aclk
+            - hclk
+            - sata
+        - description: Power Module keep-alive clock
+          const: pmalive
+        - description: RxOOB detection clock
+          const: rxoob
+        - description: SATA Ports reference clock
+          const: ref
+
+  resets:
+    description:
+      At least basic application and reference clock domains resets are
+      normally supported by the DWC AHCI SATA controller.
+    minItems: 1
+    maxItems: 4
+
+  reset-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      oneOf:
+        - description: Application AHB/AXI BIU clock domain reset control
+          enum:
+            - arst
+            - hrst
+        - description: Power Module keep-alive clock domain reset control
+          const: pmalive
+        - description: RxOOB detection clock domain reset control
+          const: rxoob
+        - description: Reference clock domain reset control
+          const: ref
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    $ref: '#/$defs/dwc-ahci-port'
+
+additionalProperties: true
+
+$defs:
+  dwc-ahci-port:
+    $ref: /schemas/ata/ahci-common.yaml#/$defs/ahci-port
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      snps,tx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Maximal size of Tx DMA transactions in FIFO words
+        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+      snps,rx-ts-max:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Maximal size of Rx DMA transactions in FIFO words
+        enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024 ]
+
+...
diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
new file mode 100644
index 000000000000..5afa4b57ce20
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/snps,dwc-ahci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC AHCI SATA controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  This document defines device tree bindings for the generic Synopsys DWC
+  implementation of the AHCI SATA controller.
+
+allOf:
+  - $ref: snps,dwc-ahci-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: Synopsys AHCI SATA-compatible devices
+        const: snps,dwc-ahci
+      - description: SPEAr1340 AHCI SATA device
+        const: snps,spear-ahci
+      - description: Rockhip RK3568 AHCI controller
+        items:
+          - const: rockchip,rk3568-dwc-ahci
+          - const: snps,dwc-ahci
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/ata/ahci.h>
+
+    sata@122f0000 {
+      compatible = "snps,dwc-ahci";
+      reg = <0x122F0000 0x1ff>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&clock1>, <&clock2>;
+      clock-names = "aclk", "ref";
+
+      phys = <&sata_phy>;
+      phy-names = "sata-phy";
+
+      ports-implemented = <0x1>;
+
+      sata-port@0 {
+        reg = <0>;
+
+        hba-port-cap = <HBA_PORT_FBSCP>;
+
+        snps,tx-ts-max = <512>;
+        snps,rx-ts-max = <512>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
index 64ffff460026..49304a1476ab 100644
--- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -10,18 +10,25 @@ maintainers:
   - Robin van der Gracht <robin@protonic.nl>
 
 allOf:
-  - $ref: "/schemas/input/matrix-keymap.yaml#"
+  - $ref: /schemas/input/matrix-keymap.yaml#
 
 properties:
   compatible:
-    const: holtek,ht16k33
+    oneOf:
+      - items:
+          - enum:
+              - adafruit,3108  # 0.56" 4-Digit 7-Segment FeatherWing Display (Red)
+              - adafruit,3130  # 0.54" Quad Alphanumeric FeatherWing Display (Red)
+          - const: holtek,ht16k33
+
+      - const: holtek,ht16k33     # Generic 16*8 LED controller with dot-matrix display
 
   reg:
     maxItems: 1
 
   refresh-rate-hz:
     maxItems: 1
-    description: Display update interval in Hertz
+    description: Display update interval in Hertz for dot-matrix displays
 
   interrupts:
     maxItems: 1
@@ -41,10 +48,22 @@ properties:
     default: 16
     description: Initial brightness level
 
+  led:
+    type: object
+    $ref: /schemas/leds/common.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
-  - refresh-rate-hz
+
+if:
+  properties:
+    compatible:
+      const: holtek,ht16k33
+then:
+  required:
+    - refresh-rate-hz
 
 additionalProperties: false
 
@@ -52,7 +71,8 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/input/input.h>
-    i2c1 {
+    #include <dt-bindings/leds/common.h>
+    i2c {
             #address-cells = <1>;
             #size-cells = <0>;
 
@@ -73,5 +93,11 @@ examples:
                                    <MATRIX_KEY(4, 1, KEY_F9)>,
                                    <MATRIX_KEY(5, 1, KEY_F3)>,
                                    <MATRIX_KEY(6, 1, KEY_F1)>;
+
+                    led {
+                            color = <LED_COLOR_ID_RED>;
+                            function = LED_FUNCTION_BACKLIGHT;
+                            linux,default-trigger = "backlight";
+                    };
             };
       };
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
index 863a287ebc7e..9845a187bdf6 100644
--- a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/bus/allwinner,sun50i-a64-de2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A64 Display Engine Bus Device Tree Bindings
+title: Allwinner A64 Display Engine Bus
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -35,7 +35,10 @@ properties:
       The SRAM that needs to be claimed to access the display engine
       bus.
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
 
   ranges: true
 
@@ -43,6 +46,7 @@ patternProperties:
   # All other properties should be child nodes with unit-address and 'reg'
   "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+$":
     type: object
+    additionalProperties: true
     properties:
       reg:
         maxItems: 1
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
index 3d719f468a5b..24c939f59091 100644
--- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/bus/allwinner,sun8i-a23-rsb.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A23 RSB Device Tree Bindings
+title: Allwinner A23 RSB
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -45,6 +45,7 @@ properties:
 patternProperties:
   "^.*@[0-9a-fA-F]+$":
     type: object
+    additionalProperties: true
     properties:
       reg:
         maxItems: 1
diff --git a/Documentation/devicetree/bindings/bus/aspeed,ast2600-ahbc.yaml b/Documentation/devicetree/bindings/bus/aspeed,ast2600-ahbc.yaml
new file mode 100644
index 000000000000..2894256c976d
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/aspeed,ast2600-ahbc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED Advanced High-Performance Bus Controller (AHBC)
+
+maintainers:
+  - Neal Liu <neal_liu@aspeedtech.com>
+  - Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+
+description: |
+  Advanced High-performance Bus Controller (AHBC) supports plenty of mechanisms
+  including a priority arbiter, an address decoder and a data multiplexer
+  to control the overall operations of Advanced High-performance Bus (AHB).
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-ahbc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ahbc@1e600000 {
+        compatible = "aspeed,ast2600-ahbc";
+        reg = <0x1e600000 0x100>;
+    };
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
deleted file mode 100644
index 10f6d0a8159d..000000000000
--- a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Broadcom GISB bus Arbiter controller
-
-Required properties:
-
-- compatible:
-    "brcm,bcm7278-gisb-arb" for V7 28nm chips
-    "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for other 28nm chips
-    "brcm,bcm7435-gisb-arb" for newer 40nm chips
-    "brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips
-    "brcm,bcm7038-gisb-arb" for 130nm chips
-- reg: specifies the base physical address and size of the registers
-- interrupts: specifies the two interrupts (timeout and TEA) to be used from
-  the parent interrupt controller. A third optional interrupt may be specified
-  for breakpoints.
-
-Optional properties:
-
-- brcm,gisb-arb-master-mask: 32-bits wide bitmask used to specify which GISB
-  masters are valid at the system level
-- brcm,gisb-arb-master-names: string list of the litteral name of the GISB
-  masters. Should match the number of bits set in brcm,gisb-master-mask and
-  the order in which they appear
-
-Example:
-
-gisb-arb@f0400000 {
-	compatible = "brcm,gisb-arb";
-	reg = <0xf0400000 0x800>;
-	interrupts = <0>, <2>;
-	interrupt-parent = <&sun_l2_intc>;
-
-	brcm,gisb-arb-master-mask = <0x7>;
-	brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
-};
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
new file mode 100644
index 000000000000..b23c3001991e
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/brcm,gisb-arb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom GISB bus Arbiter controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7445-gisb-arb  # for other 28nm chips
+          - const: brcm,gisb-arb
+      - items:
+          - enum:
+              - brcm,bcm7278-gisb-arb  # for V7 28nm chips
+              - brcm,bcm7435-gisb-arb  # for newer 40nm chips
+              - brcm,bcm7400-gisb-arb  # for older 40nm chips and all 65nm chips
+              - brcm,bcm7038-gisb-arb  # for 130nm chips
+              - brcm,gisb-arb          # fallback compatible
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: timeout interrupt line
+      - description: target abort interrupt line
+      - description: breakpoint interrupt line
+
+  brcm,gisb-arb-master-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      32-bits wide bitmask used to specify which GISB masters are valid at the
+      system level
+
+  brcm,gisb-arb-master-names:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: >
+      String list of the litteral name of the GISB masters. Should match the
+      number of bits set in brcm,gisb-master-mask and the order in which they
+      appear from MSB to LSB.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    gisb-arb@f0400000 {
+      compatible = "brcm,gisb-arb";
+      reg = <0xf0400000 0x800>;
+      interrupts = <0>, <2>;
+      interrupt-parent = <&sun_l2_intc>;
+      brcm,gisb-arb-master-mask = <0x7>;
+      brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
+    };
diff --git a/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
new file mode 100644
index 000000000000..b568d0ce438d
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Pixel Link Medium Speed Interconnect (MSI) Bus
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  i.MX8qxp pixel link MSI bus is used to control settings of PHYs, I/Os
+  sitting together with the PHYs.  It is not the same as the MSI bus coming
+  from i.MX8 System Controller Unit (SCU) which is used to control power,
+  clock and reset through the i.MX8 Distributed Slave System Controller (DSC).
+
+  i.MX8qxp pixel link MSI bus is a simple memory-mapped bus. Two input clocks,
+  that is, MSI clock and AHB clock, need to be enabled so that peripherals
+  connected to the bus can be accessed. Also, the bus is part of a power
+  domain. The power domain needs to be enabled before the peripherals can
+  be accessed.
+
+  Peripherals in i.MX8qm/qxp imaging, LVDS, MIPI DSI and HDMI TX subsystems,
+  like I2C controller, PWM controller, MIPI DSI controller and Control and
+  Status Registers (CSR) module, are accessed through the bus.
+
+  The i.MX System Controller Firmware (SCFW) owns and uses the i.MX8qm/qxp
+  pixel link MSI bus controller and does not allow SCFW user to control it.
+  So, the controller's registers cannot be accessed by SCFW user. Hence,
+  the interrupts generated by the controller don't make any sense from SCFW
+  user's point of view.
+
+allOf:
+  - $ref: simple-pm-bus.yaml#
+
+# We need a select here so we don't match all nodes with 'simple-pm-bus'.
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,imx8qxp-display-pixel-link-msi-bus
+          - fsl,imx8qm-display-pixel-link-msi-bus
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8qxp-display-pixel-link-msi-bus
+          - fsl,imx8qm-display-pixel-link-msi-bus
+      - const: simple-pm-bus
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: master gated clock from system
+      - description: AHB clock
+
+  clock-names:
+    items:
+      - const: msi
+      - const: ahb
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    description: Devices attached to the bus
+    type: object
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    bus@56200000 {
+        compatible = "fsl,imx8qxp-display-pixel-link-msi-bus", "simple-pm-bus";
+        reg = <0x56200000 0x20000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        interrupt-parent = <&dc0_irqsteer>;
+        interrupts = <320>;
+        ranges;
+        clocks = <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>,
+                 <&dc0_disp_ctrl_link_mst0_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "msi", "ahb";
+        power-domains = <&pd IMX_SC_R_DC_0>;
+
+        syscon@56221000 {
+            compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
+            reg = <0x56221000 0x1000>;
+            clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
+            clock-names = "ipg";
+
+            pxl2dpi {
+                compatible = "fsl,imx8qxp-pxl2dpi";
+                fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+                power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <0>;
+
+                        mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
+                            reg = <0>;
+                            remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                        };
+
+                        mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
+                            reg = <1>;
+                            remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                        };
+                    };
+
+                    port@1 {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        reg = <1>;
+
+                        mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+                            reg = <0>;
+                            remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                        };
+
+                        mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+                            reg = <1>;
+                            remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                        };
+                    };
+                };
+            };
+
+            ldb {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                compatible = "fsl,imx8qxp-ldb";
+                clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+                         <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+                clock-names = "pixel", "bypass";
+                power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+                channel@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
+                    phys = <&mipi_lvds_0_phy>;
+                    phy-names = "lvds_phy";
+
+                    port@0 {
+                        reg = <0>;
+
+                        mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+                            remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        /* ... */
+                    };
+                };
+
+                channel@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+                    phys = <&mipi_lvds_0_phy>;
+                    phy-names = "lvds_phy";
+
+                    port@0 {
+                        reg = <0>;
+
+                        mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+                            remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+
+                        /* ... */
+                    };
+                };
+            };
+        };
+
+        clock-controller@56223004 {
+            compatible = "fsl,imx8qxp-lpcg";
+            reg = <0x56223004 0x4>;
+            #clock-cells = <1>;
+            clocks = <&mipi_lvds_0_ipg_clk>;
+            clock-indices = <IMX_LPCG_CLK_4>;
+            clock-output-names = "mipi_lvds_0_di_mipi_lvds_regs_lpcg_ipg_clk";
+            power-domains = <&pd IMX_SC_R_MIPI_0>;
+        };
+
+        phy@56228300 {
+            compatible = "fsl,imx8qxp-mipi-dphy";
+            reg = <0x56228300 0x100>;
+            clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
+            clock-names = "phy_ref";
+            #phy-cells = <0>;
+            fsl,syscon = <&mipi_lvds_0_csr>;
+            power-domains = <&pd IMX_SC_R_MIPI_0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml
new file mode 100644
index 000000000000..d42dbb0bbc2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/fsl,spba-bus.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/fsl,spba-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Shared Peripherals Bus Interface
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+
+description: |
+  A simple bus enabling access to shared peripherals.
+
+  The "spba-bus" follows the "simple-bus" set of properties, as
+  specified in the Devicetree Specification.  It is an extension of
+  "simple-bus" because the SDMA controller uses this compatible flag to
+  determine which peripherals are available to it and the range over which
+  the SDMA can access.  There are no special clocks for the bus, because
+  the SDMA controller itself has its interrupt and clock assignments.
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: fsl,spba-bus
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^spba-bus(@[0-9a-f]+)?$"
+
+  compatible:
+    items:
+      - const: fsl,spba-bus
+      - const: simple-bus
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - reg
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    spba-bus@30000000 {
+        compatible = "fsl,spba-bus", "simple-bus";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x30000000 0x100000>;
+        ranges;
+    };
diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
index 1b1d1c5c21ea..e7f502070d77 100644
--- a/Documentation/devicetree/bindings/bus/imx-weim.txt
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -48,6 +48,11 @@ Optional properties:
 			devices, the presence of this property indicates that
 			the weim bus should operate in Burst Clock Mode.
 
+ - fsl,continuous-burst-clk	Make Burst Clock to output continuous clock.
+			Without this option Burst Clock will output clock
+			only when necessary. This takes effect only if
+			"fsl,burst-clk-enable" is set.
+
 Timing property for child nodes. It is mandatory, not optional.
 
  - fsl,weim-cs-timing:	The timing array, contains timing values for the
diff --git a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml b/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
deleted file mode 100644
index 5fb4e7bfa4da..000000000000
--- a/Documentation/devicetree/bindings/bus/intel,ixp4xx-expansion-bus-controller.yaml
+++ /dev/null
@@ -1,168 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/bus/intel,ixp4xx-expansion-bus-controller.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Intel IXP4xx Expansion Bus Controller
-
-description: |
-  The IXP4xx expansion bus controller handles access to devices on the
-  memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
-  including IXP42x, IXP43x, IXP45x and IXP46x.
-
-maintainers:
-  - Linus Walleij <linus.walleij@linaro.org>
-
-properties:
-  $nodename:
-    pattern: '^bus@[0-9a-f]+$'
-
-  compatible:
-    items:
-      - enum:
-          - intel,ixp42x-expansion-bus-controller
-          - intel,ixp43x-expansion-bus-controller
-          - intel,ixp45x-expansion-bus-controller
-          - intel,ixp46x-expansion-bus-controller
-      - const: syscon
-
-  reg:
-    description: Control registers for the expansion bus, these are not
-      inside the memory range handled by the expansion bus.
-    maxItems: 1
-
-  native-endian:
-    $ref: /schemas/types.yaml#/definitions/flag
-    description: The IXP4xx has a peculiar MMIO access scheme, as it changes
-      the access pattern for words (swizzling) on the bus depending on whether
-      the SoC is running in big-endian or little-endian mode. Thus the
-      registers must always be accessed using native endianness.
-
-  "#address-cells":
-    description: |
-      The first cell is the chip select number.
-      The second cell is the address offset within the bank.
-    const: 2
-
-  "#size-cells":
-    const: 1
-
-  ranges: true
-  dma-ranges: true
-
-patternProperties:
-  "^.*@[0-7],[0-9a-f]+$":
-    description: Devices attached to chip selects are represented as
-      subnodes.
-    type: object
-
-    properties:
-      intel,ixp4xx-eb-t1:
-        description: Address timing, extend address phase with n cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 3
-
-      intel,ixp4xx-eb-t2:
-        description: Setup chip select timing, extend setup phase with n cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 3
-
-      intel,ixp4xx-eb-t3:
-        description: Strobe timing, extend strobe phase with n cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 15
-
-      intel,ixp4xx-eb-t4:
-        description: Hold timing, extend hold phase with n cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 3
-
-      intel,ixp4xx-eb-t5:
-        description: Recovery timing, extend recovery phase with n cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        maximum: 15
-
-      intel,ixp4xx-eb-cycle-type:
-        description: The type of cycles to use on the expansion bus for this
-          chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1, 2]
-
-      intel,ixp4xx-eb-byte-access-on-halfword:
-        description: Allow byte read access on half word devices.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      intel,ixp4xx-eb-hpi-hrdy-pol-high:
-        description: Set HPI HRDY polarity to active high when using HPI.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      intel,ixp4xx-eb-mux-address-and-data:
-        description: Multiplex address and data on the data bus.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      intel,ixp4xx-eb-ahb-split-transfers:
-        description: Enable AHB split transfers.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      intel,ixp4xx-eb-write-enable:
-        description: Enable write cycles.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-      intel,ixp4xx-eb-byte-access:
-        description: Expansion bus uses only 8 bits. The default is to use
-          16 bits.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [0, 1]
-
-required:
-  - compatible
-  - reg
-  - native-endian
-  - "#address-cells"
-  - "#size-cells"
-  - ranges
-  - dma-ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/irq.h>
-    bus@50000000 {
-        compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
-        reg = <0xc4000000 0x28>;
-        native-endian;
-        #address-cells = <2>;
-        #size-cells = <1>;
-        ranges = <0 0x0 0x50000000 0x01000000>,
-                 <1 0x0 0x51000000 0x01000000>;
-        dma-ranges = <0 0x0 0x50000000 0x01000000>,
-                     <1 0x0 0x51000000 0x01000000>;
-        flash@0,0 {
-            compatible = "intel,ixp4xx-flash", "cfi-flash";
-            bank-width = <2>;
-            reg = <0 0x00000000 0x1000000>;
-            intel,ixp4xx-eb-t3 = <3>;
-            intel,ixp4xx-eb-cycle-type = <0>;
-            intel,ixp4xx-eb-byte-access-on-halfword = <1>;
-            intel,ixp4xx-eb-write-enable = <1>;
-            intel,ixp4xx-eb-byte-access = <0>;
-        };
-        serial@1,0 {
-            compatible = "exar,xr16l2551", "ns8250";
-            reg = <1 0x00000000 0x10>;
-            interrupt-parent = <&gpio0>;
-            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-            clock-frequency = <1843200>;
-            intel,ixp4xx-eb-t3 = <3>;
-            intel,ixp4xx-eb-cycle-type = <1>;
-            intel,ixp4xx-eb-write-enable = <1>;
-            intel,ixp4xx-eb-byte-access = <1>;
-        };
-    };
diff --git a/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml b/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml
new file mode 100644
index 000000000000..a8d40c766dcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/microsoft,vmbus.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/microsoft,vmbus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsoft Hyper-V VMBus
+
+maintainers:
+  - Saurabh Sengar <ssengar@linux.microsoft.com>
+
+description:
+  VMBus is a software bus that implement the protocols for communication
+  between the root or host OS and guest OSs (virtual machines).
+
+properties:
+  compatible:
+    const: microsoft,vmbus
+
+  ranges: true
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 1
+
+required:
+  - compatible
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <1>;
+        bus {
+            compatible = "simple-bus";
+            #address-cells = <2>;
+            #size-cells = <1>;
+            ranges;
+
+            vmbus@ff0000000 {
+                compatible = "microsoft,vmbus";
+                #address-cells = <2>;
+                #size-cells = <1>;
+                ranges = <0x0f 0xf0000000 0x0f 0xf0000000 0x10000000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
index 7b1a08c62aef..4157e885c6e7 100644
--- a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
+++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.yaml
@@ -21,6 +21,7 @@ properties:
       - const: nvidia,tegra210-aconnect
       - items:
           - enum:
+              - nvidia,tegra234-aconnect
               - nvidia,tegra186-aconnect
               - nvidia,tegra194-aconnect
           - const: nvidia,tegra210-aconnect
@@ -39,10 +40,10 @@ properties:
     maxItems: 1
 
   "#address-cells":
-    const: 1
+    enum: [ 1, 2 ]
 
   "#size-cells":
-    const: 1
+    enum: [ 1, 2 ]
 
   ranges: true
 
diff --git a/Documentation/devicetree/bindings/bus/palmbus.yaml b/Documentation/devicetree/bindings/bus/palmbus.yaml
new file mode 100644
index 000000000000..c36c1e92a573
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/palmbus.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/palmbus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink PalmBus
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+  The ralink palmbus controller can be found in all ralink MIPS
+  SoCs. It provides an external bus for connecting multiple
+  external devices to the SoC.
+
+properties:
+  $nodename:
+    pattern: "^palmbus(@[0-9a-f]+)?$"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  compatible:
+    const: palmbus
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+patternProperties:
+  # All other properties should be child nodes with unit-address and 'reg'
+  "@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    palmbus@1e000000 {
+        compatible = "palmbus";
+        reg = <0x1e000000 0x100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e000000 0x0fffff>;
+
+        gpio@600 {
+            #gpio-cells = <2>;
+            #interrupt-cells = <2>;
+            compatible = "mediatek,mt7621-gpio";
+            gpio-controller;
+            gpio-ranges = <&pinctrl 0 0 95>;
+            interrupt-controller;
+            reg = <0x600 0x100>;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SHARED 12 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
new file mode 100644
index 000000000000..8e9e6ff35d7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/qcom,ssc-block-bus.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/qcom,ssc-block-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The AHB Bus Providing a Global View of the SSC Block on (some) qcom SoCs
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+
+description: |
+  This binding describes the dependencies (clocks, resets, power domains) which
+  need to be turned on in a sequence before communication over the AHB bus
+  becomes possible.
+
+  Additionally, the reg property is used to pass to the driver the location of
+  two sadly undocumented registers which need to be poked as part of the sequence.
+
+  The SSC (Snapdragon Sensor Core) block contains a gpio controller, i2c/spi/uart
+  controllers, a hexagon core, and a clock controller which provides clocks for
+  the above.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,msm8998-ssc-block-bus
+      - const: qcom,ssc-block-bus
+
+  reg:
+    items:
+      - description: SSCAON_CONFIG0 registers
+      - description: SSCAON_CONFIG1 registers
+
+  reg-names:
+    items:
+      - const: mpm_sscaon_config0
+      - const: mpm_sscaon_config1
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: xo
+      - const: aggre2
+      - const: gcc_im_sleep
+      - const: aggre2_north
+      - const: ssc_xo
+      - const: ssc_ahbs
+
+  power-domains:
+    items:
+      - description: CX power domain
+      - description: MX power domain
+
+  power-domain-names:
+    items:
+      - const: ssc_cx
+      - const: ssc_mx
+
+  resets:
+    items:
+      - description: Main reset
+      - description:
+          SSC Branch Control Register reset (associated with the ssc_xo and
+          ssc_ahbs clocks)
+
+  reset-names:
+    items:
+      - const: ssc_reset
+      - const: ssc_bcr
+
+  qcom,halt-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: describes how to locate the ssc AXI halt register
+    items:
+      - items:
+          - description: Phandle reference to a syscon representing TCSR
+          - description: offset for the ssc AXI halt register
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - clocks
+  - clock-names
+  - power-domains
+  - power-domain-names
+  - resets
+  - reset-names
+  - qcom,halt-regs
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        // devices under this node are physically located in the SSC block, connected to an ssc-internal bus;
+        ssc_ahb_slave: bus@10ac008 {
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            compatible = "qcom,msm8998-ssc-block-bus", "qcom,ssc-block-bus";
+            reg = <0x10ac008 0x4>, <0x10ac010 0x4>;
+            reg-names = "mpm_sscaon_config0", "mpm_sscaon_config1";
+
+            clocks = <&xo>,
+                     <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
+                     <&gcc GCC_IM_SLEEP>,
+                     <&gcc AGGRE2_SNOC_NORTH_AXI>,
+                     <&gcc SSC_XO>,
+                     <&gcc SSC_CNOC_AHBS_CLK>;
+            clock-names = "xo", "aggre2", "gcc_im_sleep", "aggre2_north", "ssc_xo", "ssc_ahbs";
+
+            resets = <&gcc GCC_SSC_RESET>, <&gcc GCC_SSC_BCR>;
+            reset-names = "ssc_reset", "ssc_bcr";
+
+            power-domains = <&rpmpd MSM8998_SSCCX>, <&rpmpd MSM8998_SSCMX>;
+            power-domain-names = "ssc_cx", "ssc_mx";
+
+            qcom,halt-regs = <&tcsr_mutex_regs 0x26000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt
deleted file mode 100644
index c984143d08d2..000000000000
--- a/Documentation/devicetree/bindings/bus/ti-sysc.txt
+++ /dev/null
@@ -1,139 +0,0 @@
-Texas Instruments sysc interconnect target module wrapper binding
-
-Texas Instruments SoCs can have a generic interconnect target module
-hardware for devices connected to various interconnects such as L3
-interconnect (Arteris NoC) and L4 interconnect (Sonics s3220). The sysc
-is mostly used for interaction between module and PRCM. It participates
-in the OCP Disconnect Protocol but other than that is mostly independent
-of the interconnect.
-
-Each interconnect target module can have one or more devices connected to
-it. There is a set of control registers for managing interconnect target
-module clocks, idle modes and interconnect level resets for the module.
-
-These control registers are sprinkled into the unused register address
-space of the first child device IP block managed by the interconnect
-target module and typically are named REVISION, SYSCONFIG and SYSSTATUS.
-
-Required standard properties:
-
-- compatible	shall be one of the following generic types:
-
-		"ti,sysc"
-		"ti,sysc-omap2"
-		"ti,sysc-omap4"
-		"ti,sysc-omap4-simple"
-
-		or one of the following derivative types for hardware
-		needing special workarounds:
-
-		"ti,sysc-omap2-timer"
-		"ti,sysc-omap4-timer"
-		"ti,sysc-omap3430-sr"
-		"ti,sysc-omap3630-sr"
-		"ti,sysc-omap4-sr"
-		"ti,sysc-omap3-sham"
-		"ti,sysc-omap-aes"
-		"ti,sysc-mcasp"
-		"ti,sysc-dra7-mcasp"
-		"ti,sysc-usb-host-fs"
-		"ti,sysc-dra7-mcan"
-		"ti,sysc-pruss"
-
-- reg		shall have register areas implemented for the interconnect
-		target module in question such as revision, sysc and syss
-
-- reg-names	shall contain the register names implemented for the
-		interconnect target module in question such as
-		"rev, "sysc", and "syss"
-
-- ranges	shall contain the interconnect target module IO range
-		available for one or more child device IP blocks managed
-		by the interconnect target module, the ranges may include
-		multiple ranges such as device L4 range for control and
-		parent L3 range for DMA access
-
-Optional properties:
-
-- ti,sysc-mask	shall contain mask of supported register bits for the
-		SYSCONFIG register as documented in the Technical Reference
-		Manual (TRM) for the interconnect target module
-
-- ti,sysc-midle	list of master idle modes supported by the interconnect
-		target module as documented in the TRM for SYSCONFIG
-		register MIDLEMODE bits
-
-- ti,sysc-sidle	list of slave idle modes supported by the interconnect
-		target module as documented in the TRM for SYSCONFIG
-		register SIDLEMODE bits
-
-- ti,sysc-delay-us	delay needed after OCP softreset before accssing
-			SYSCONFIG register again
-
-- ti,syss-mask	optional mask of reset done status bits as described in the
-		TRM for SYSSTATUS registers, typically 1 with some devices
-		having separate reset done bits for children like OHCI and
-		EHCI
-
-- clocks	clock specifier for each name in the clock-names as
-		specified in the binding documentation for ti-clkctrl,
-		typically available for all interconnect targets on TI SoCs
-		based on omap4 except if it's read-only register in hwauto
-		mode as for example omap4 L4_CFG_CLKCTRL
-
-- clock-names	should contain at least "fck", and optionally also "ick"
-		depending on the SoC and the interconnect target module,
-		some interconnect target modules also need additional
-		optional clocks that can be specified as listed in TRM
-		for the related CLKCTRL register bits 8 to 15 such as
-		"dbclk" or "clk32k" depending on their role
-
-- ti,hwmods	optional TI interconnect module name to use legacy
-		hwmod platform data
-
-- ti,no-reset-on-init	interconnect target module should not be reset at init
-
-- ti,no-idle-on-init	interconnect target module should not be idled at init
-
-- ti,no-idle		interconnect target module should not be idled
-
-Example: Single instance of MUSB controller on omap4 using interconnect ranges
-using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
-
-	target-module@2b000 {		/* 0x4a0ab000, ap 84 12.0 */
-		compatible = "ti,sysc-omap2";
-		ti,hwmods = "usb_otg_hs";
-		reg = <0x2b400 0x4>,
-		      <0x2b404 0x4>,
-		      <0x2b408 0x4>;
-		reg-names = "rev", "sysc", "syss";
-		clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
-		clock-names = "fck";
-		ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
-				 SYSC_OMAP2_SOFTRESET |
-				 SYSC_OMAP2_AUTOIDLE)>;
-		ti,sysc-midle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>,
-				<SYSC_IDLE_SMART>;
-		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
-				<SYSC_IDLE_NO>,
-				<SYSC_IDLE_SMART>,
-				<SYSC_IDLE_SMART_WKUP>;
-		ti,syss-mask = <1>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x2b000 0x1000>;
-
-		usb_otg_hs: otg@0 {
-			compatible = "ti,omap4-musb";
-			reg = <0x0 0x7ff>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			usb-phy = <&usb2_phy>;
-			...
-		};
-	};
-
-Note that other SoCs, such as am335x can have multiple child devices. On am335x
-there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA
-instance as children of a single interconnect target module.
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.yaml b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
new file mode 100644
index 000000000000..f089634f9466
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/ti-sysc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments interconnect target module
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  Texas Instruments SoCs can have a generic interconnect target module
+  for devices connected to various interconnects such as L3 interconnect
+  using Arteris NoC, and L4 interconnect using Sonics s3220. This module
+  is mostly used for interaction between module and Power, Reset and Clock
+  Manager PRCM. It participates in the OCP Disconnect Protocol, but other
+  than that it is mostly independent of the interconnect.
+
+  Each interconnect target module can have one or more devices connected to
+  it. There is a set of control registers for managing the interconnect target
+  module clocks, idle modes and interconnect level resets.
+
+  The interconnect target module control registers are sprinkled into the
+  unused register address space of the first child device IP block managed by
+  the interconnect target module. Typically the register names are REVISION,
+  SYSCONFIG and SYSSTATUS.
+
+properties:
+  $nodename:
+    pattern: "^target-module(@[0-9a-f]+)?$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,sysc-omap2
+              - ti,sysc-omap4
+              - ti,sysc-omap4-simple
+              - ti,sysc-omap2-timer
+              - ti,sysc-omap4-timer
+              - ti,sysc-omap3430-sr
+              - ti,sysc-omap3630-sr
+              - ti,sysc-omap4-sr
+              - ti,sysc-omap3-sham
+              - ti,sysc-omap-aes
+              - ti,sysc-mcasp
+              - ti,sysc-dra7-mcasp
+              - ti,sysc-usb-host-fs
+              - ti,sysc-dra7-mcan
+              - ti,sysc-pruss
+          - const: ti,sysc
+      - items:
+          - const: ti,sysc
+
+  reg:
+    description:
+      Interconnect target module control registers consisting of
+      REVISION, SYSCONFIG and SYSSTATUS registers as defined in the
+      Technical Reference Manual for the SoC.
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    description:
+      Interconnect target module control register names consisting
+      of "rev", "sysc" and "syss".
+    oneOf:
+      - minItems: 1
+        items:
+          - const: rev
+          - const: sysc
+          - const: syss
+      - items:
+          - const: rev
+          - const: syss
+      - enum: [ sysc, syss ]
+
+  power-domains:
+    description: Target module power domain if available.
+    maxItems: 1
+
+  clocks:
+    description:
+      Target module clocks consisting of one functional clock, one
+      interface clock, and up to 8 module specific optional clocks.
+      Some modules may have only the functional clock, and some have
+      no configurable clocks.
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    description:
+      Target module clock names like "fck", "ick", "optck1", "optck2"
+      if the clocks are configurable.
+    oneOf:
+      - enum: [ ick, fck, sys_clk ]
+      - items:
+          - const: fck
+          - enum: [ ick. dbclk, osc, sys_clk, dss_clk, ahclkx ]
+      - items:
+          - const: fck
+          - const: phy-clk
+          - const: phy-clk-div
+      - items:
+          - const: fck
+          - const: hdmi_clk
+          - const: sys_clk
+          - const: tv_clk
+      - items:
+          - const: fck
+          - const: ahclkx
+          - const: ahclkr
+
+  resets:
+    description:
+      Target module reset bit in the RSTCTRL register if wired for the module.
+      Note that the other reset bits should be mapped for the child device
+      driver to use.
+    maxItems: 1
+
+  reset-names:
+    description:
+      Target module reset names in the RSTCTRL register, typically named
+      "rstctrl" if only one reset bit is wired for the module.
+    items:
+      - const: rstctrl
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  dma-ranges: true
+
+  ti,sysc-mask:
+    description: Mask of supported register bits for the SYSCONFIG register
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,sysc-midle:
+    description: List of hardware supported idle modes
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  ti,sysc-sidle:
+    description: List of hardware supported idle modes
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  ti,syss-mask:
+    description: Mask of supported register bits for the SYSSTATUS register
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,sysc-delay-us:
+    description: Delay needed after OCP softreset before accessing SYCONFIG
+    default: 0
+    minimum: 0
+    maximum: 2
+
+  ti,no-reset-on-init:
+    description: Interconnect target module shall not be reset at init
+    type: boolean
+
+  ti,no-idle-on-init:
+    description: Interconnect target module shall not be idled at init
+    type: boolean
+
+  ti,no-idle:
+    description: Interconnect target module shall not be idled
+    type: boolean
+
+  ti,hwmods:
+    description: Interconnect module name to use with legacy hwmod data
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/bus/ti-sysc.h>
+    #include <dt-bindings/clock/omap4.h>
+
+    target-module@2b000 {
+        compatible = "ti,sysc-omap2", "ti,sysc";
+        ti,hwmods = "usb_otg_hs";
+        reg = <0x2b400 0x4>,
+              <0x2b404 0x4>,
+              <0x2b408 0x4>;
+        reg-names = "rev", "sysc", "syss";
+        clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
+        clock-names = "fck";
+        ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+                         SYSC_OMAP2_SOFTRESET |
+                         SYSC_OMAP2_AUTOIDLE)>;
+        ti,sysc-midle = <SYSC_IDLE_FORCE>,
+                        <SYSC_IDLE_NO>,
+                        <SYSC_IDLE_SMART>;
+        ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+                        <SYSC_IDLE_NO>,
+                        <SYSC_IDLE_SMART>,
+                        <SYSC_IDLE_SMART_WKUP>;
+        ti,syss-mask = <1>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x2b000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml b/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml
new file mode 100644
index 000000000000..7f62ffbdc245
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/xlnx,versal-net-cdx.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/xlnx,versal-net-cdx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD CDX bus controller
+
+description: |
+  CDX bus controller for AMD devices is implemented to dynamically
+  detect CDX bus and devices using the firmware.
+  The CDX bus manages multiple FPGA based hardware devices, which
+  can support network, crypto or any other specialized type of
+  devices. These FPGA based devices can be added/modified dynamically
+  on run-time.
+
+  All devices on the CDX bus will have a unique streamid (for IOMMU)
+  and a unique device ID (for MSI) corresponding to a requestor ID
+  (one to one associated with the device). The streamid and deviceid
+  are used to configure SMMU and GIC-ITS respectively.
+
+  iommu-map property is used to define the set of stream ids
+  corresponding to each device and the associated IOMMU.
+
+  The MSI writes are accompanied by sideband data (Device ID).
+  The msi-map property is used to associate the devices with the
+  device ID as well as the associated ITS controller.
+
+  rproc property (xlnx,rproc) is used to identify the remote processor
+  with which APU (Application Processor Unit) interacts to find out
+  the bus and device configuration.
+
+maintainers:
+  - Nipun Gupta <nipun.gupta@amd.com>
+  - Nikhil Agarwal <nikhil.agarwal@amd.com>
+
+properties:
+  compatible:
+    const: xlnx,versal-net-cdx
+
+  iommu-map: true
+
+  msi-map: true
+
+  xlnx,rproc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the remoteproc_r5 rproc node using which APU interacts
+      with remote processor.
+
+  ranges: true
+
+  "#address-cells":
+    enum: [1, 2]
+
+  "#size-cells":
+    enum: [1, 2]
+
+required:
+  - compatible
+  - iommu-map
+  - msi-map
+  - xlnx,rproc
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cdx {
+        compatible = "xlnx,versal-net-cdx";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        /* define map for RIDs 250-259 */
+        iommu-map = <250 &smmu 250 10>;
+        /* define msi map for RIDs 250-259 */
+        msi-map = <250 &its 250 10>;
+        xlnx,rproc = <&remoteproc_r5>;
+        ranges;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml b/Documentation/devicetree/bindings/cache/baikal,bt1-l2-ctl.yaml
index 1fca282f64a2..ec4f367bc0b4 100644
--- a/Documentation/devicetree/bindings/memory-controllers/baikal,bt1-l2-ctl.yaml
+++ b/Documentation/devicetree/bindings/cache/baikal,bt1-l2-ctl.yaml
@@ -2,7 +2,7 @@
 # Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/memory-controllers/baikal,bt1-l2-ctl.yaml#
+$id: http://devicetree.org/schemas/cache/baikal,bt1-l2-ctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Baikal-T1 L2-cache Control Block
diff --git a/Documentation/devicetree/bindings/cache/freescale-l2cache.txt b/Documentation/devicetree/bindings/cache/freescale-l2cache.txt
new file mode 100644
index 000000000000..22ad012660e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/freescale-l2cache.txt
@@ -0,0 +1,55 @@
+Freescale L2 Cache Controller
+
+L2 cache is present in Freescale's QorIQ and QorIQ Qonverge platforms.
+The cache bindings explained below are Devicetree Specification compliant
+
+Required Properties:
+
+- compatible	: Should include one of the following:
+		  "fsl,b4420-l2-cache-controller"
+		  "fsl,b4860-l2-cache-controller"
+		  "fsl,bsc9131-l2-cache-controller"
+		  "fsl,bsc9132-l2-cache-controller"
+		  "fsl,c293-l2-cache-controller"
+		  "fsl,mpc8536-l2-cache-controller"
+		  "fsl,mpc8540-l2-cache-controller"
+		  "fsl,mpc8541-l2-cache-controller"
+		  "fsl,mpc8544-l2-cache-controller"
+		  "fsl,mpc8548-l2-cache-controller"
+		  "fsl,mpc8555-l2-cache-controller"
+		  "fsl,mpc8560-l2-cache-controller"
+		  "fsl,mpc8568-l2-cache-controller"
+		  "fsl,mpc8569-l2-cache-controller"
+		  "fsl,mpc8572-l2-cache-controller"
+		  "fsl,p1010-l2-cache-controller"
+		  "fsl,p1011-l2-cache-controller"
+		  "fsl,p1012-l2-cache-controller"
+		  "fsl,p1013-l2-cache-controller"
+		  "fsl,p1014-l2-cache-controller"
+		  "fsl,p1015-l2-cache-controller"
+		  "fsl,p1016-l2-cache-controller"
+		  "fsl,p1020-l2-cache-controller"
+		  "fsl,p1021-l2-cache-controller"
+		  "fsl,p1022-l2-cache-controller"
+		  "fsl,p1023-l2-cache-controller"
+		  "fsl,p1024-l2-cache-controller"
+		  "fsl,p1025-l2-cache-controller"
+		  "fsl,p2010-l2-cache-controller"
+		  "fsl,p2020-l2-cache-controller"
+		  "fsl,t2080-l2-cache-controller"
+		  "fsl,t4240-l2-cache-controller"
+		  and "cache".
+- reg		: Address and size of L2 cache controller registers
+- cache-size	: Size of the entire L2 cache
+- interrupts	: Error interrupt of L2 controller
+- cache-line-size : Size of L2 cache lines
+
+Example:
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,bsc9132-l2-cache-controller", "cache";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>; // 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 1 0>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/cache/l2c2x0.yaml
index 6b8f4d4fa580..d7840a5c4037 100644
--- a/Documentation/devicetree/bindings/arm/l2c2x0.yaml
+++ b/Documentation/devicetree/bindings/cache/l2c2x0.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/l2c2x0.yaml#
+$id: http://devicetree.org/schemas/cache/l2c2x0.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: ARM L2 Cache Controller
diff --git a/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt b/Documentation/devicetree/bindings/cache/marvell,feroceon-cache.txt
index 0d244b999d10..0d244b999d10 100644
--- a/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt
+++ b/Documentation/devicetree/bindings/cache/marvell,feroceon-cache.txt
diff --git a/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt b/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.txt
index 31af1cbb60bd..31af1cbb60bd 100644
--- a/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt
+++ b/Documentation/devicetree/bindings/cache/marvell,tauros2-cache.txt
diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
new file mode 100644
index 000000000000..d8b91944180a
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/qcom,llcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Last Level Cache Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  LLCC (Last Level Cache Controller) provides last level of cache memory in SoC,
+  that can be shared by multiple clients. Clients here are different cores in the
+  SoC, the idea is to minimize the local caches at the clients and migrate to
+  common pool of memory. Cache memory is divided into partitions called slices
+  which are assigned to clients. Clients can query the slice details, activate
+  and deactivate them.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7180-llcc
+      - qcom,sc7280-llcc
+      - qcom,sc8180x-llcc
+      - qcom,sc8280xp-llcc
+      - qcom,sdm845-llcc
+      - qcom,sm6350-llcc
+      - qcom,sm7150-llcc
+      - qcom,sm8150-llcc
+      - qcom,sm8250-llcc
+      - qcom,sm8350-llcc
+      - qcom,sm8450-llcc
+      - qcom,sm8550-llcc
+
+  reg:
+    minItems: 2
+    maxItems: 9
+
+  reg-names:
+    minItems: 2
+    maxItems: 9
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-llcc
+              - qcom,sm6350-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8180x-llcc
+              - qcom,sc8280xp-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC4 base register region
+            - description: LLCC5 base register region
+            - description: LLCC6 base register region
+            - description: LLCC7 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc4_base
+            - const: llcc5_base
+            - const: llcc6_base
+            - const: llcc7_base
+            - const: llcc_broadcast_base
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-llcc
+              - qcom,sm8150-llcc
+              - qcom,sm8250-llcc
+              - qcom,sm8350-llcc
+              - qcom,sm8450-llcc
+    then:
+      properties:
+        reg:
+          items:
+            - description: LLCC0 base register region
+            - description: LLCC1 base register region
+            - description: LLCC2 base register region
+            - description: LLCC3 base register region
+            - description: LLCC broadcast base register region
+        reg-names:
+          items:
+            - const: llcc0_base
+            - const: llcc1_base
+            - const: llcc2_base
+            - const: llcc3_base
+            - const: llcc_broadcast_base
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        system-cache-controller@1100000 {
+            compatible = "qcom,sdm845-llcc";
+            reg = <0 0x01100000 0 0x50000>, <0 0x01180000 0 0x50000>,
+                <0 0x01200000 0 0x50000>, <0 0x01280000 0 0x50000>,
+                <0 0x01300000 0 0x50000>;
+            reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+                "llcc3_base", "llcc_broadcast_base";
+            interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml b/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
new file mode 100644
index 000000000000..8a6a78e1a7ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cache/sifive,ccache0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Composable Cache Controller
+
+maintainers:
+  - Paul Walmsley <paul.walmsley@sifive.com>
+
+description:
+  The SiFive Composable Cache Controller is used to provide access to fast copies
+  of memory for masters in a Core Complex. The Composable Cache Controller also
+  acts as directory-based coherency manager.
+  All the properties in ePAPR/DeviceTree specification applies for this platform.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - sifive,ccache0
+          - sifive,fu540-c000-ccache
+          - sifive,fu740-c000-ccache
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sifive,ccache0
+              - sifive,fu540-c000-ccache
+              - sifive,fu740-c000-ccache
+          - const: cache
+      - items:
+          - const: starfive,jh7110-ccache
+          - const: sifive,ccache0
+          - const: cache
+      - items:
+          - const: microchip,mpfs-ccache
+          - const: sifive,fu540-c000-ccache
+          - const: cache
+
+  cache-block-size:
+    const: 64
+
+  cache-level:
+    enum: [2, 3]
+
+  cache-sets:
+    enum: [1024, 2048]
+
+  cache-size:
+    const: 2097152
+
+  cache-unified: true
+
+  interrupts:
+    minItems: 3
+    items:
+      - description: DirError interrupt
+      - description: DataError interrupt
+      - description: DataFail interrupt
+      - description: DirFail interrupt
+
+  reg:
+    maxItems: 1
+
+  next-level-cache: true
+
+  memory-region:
+    maxItems: 1
+    description: |
+      The reference to the reserved-memory for the L2 Loosely Integrated Memory region.
+      The reserved memory node should be defined as per the bindings in reserved-memory.txt.
+
+allOf:
+  - $ref: /schemas/cache-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sifive,fu740-c000-ccache
+              - starfive,jh7110-ccache
+              - microchip,mpfs-ccache
+
+    then:
+      properties:
+        interrupts:
+          description: |
+            Must contain entries for DirError, DataError, DataFail, DirFail signals.
+          minItems: 4
+
+    else:
+      properties:
+        interrupts:
+          description: |
+            Must contain entries for DirError, DataError and DataFail signals.
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - sifive,fu740-c000-ccache
+              - starfive,jh7110-ccache
+
+    then:
+      properties:
+        cache-sets:
+          const: 2048
+
+    else:
+      properties:
+        cache-sets:
+          const: 1024
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sifive,ccache0
+
+    then:
+      properties:
+        cache-level:
+          enum: [2, 3]
+
+    else:
+      properties:
+        cache-level:
+          const: 2
+
+additionalProperties: false
+
+required:
+  - compatible
+  - cache-block-size
+  - cache-level
+  - cache-sets
+  - cache-size
+  - cache-unified
+  - interrupts
+  - reg
+
+examples:
+  - |
+    cache-controller@2010000 {
+        compatible = "sifive,fu540-c000-ccache", "cache";
+        cache-block-size = <64>;
+        cache-level = <2>;
+        cache-sets = <1024>;
+        cache-size = <2097152>;
+        cache-unified;
+        reg = <0x2010000 0x1000>;
+        interrupt-parent = <&plic0>;
+        interrupts = <1>,
+                     <2>,
+                     <3>;
+        next-level-cache = <&L25>;
+        memory-region = <&l2_lim>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml b/Documentation/devicetree/bindings/cache/socionext,uniphier-system-cache.yaml
index 7ca5375f278f..3196263685a3 100644
--- a/Documentation/devicetree/bindings/arm/socionext/socionext,uniphier-system-cache.yaml
+++ b/Documentation/devicetree/bindings/cache/socionext,uniphier-system-cache.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/socionext/socionext,uniphier-system-cache.yaml#
+$id: http://devicetree.org/schemas/cache/socionext,uniphier-system-cache.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: UniPhier outer cache controller
@@ -22,7 +22,6 @@ properties:
     description: |
       should contain 3 regions: control register, revision register,
       operation register, in this order.
-    minItems: 3
     maxItems: 3
 
   interrupts:
diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
deleted file mode 100644
index 1cc3aa10dcb1..000000000000
--- a/Documentation/devicetree/bindings/chosen.txt
+++ /dev/null
@@ -1,137 +0,0 @@
-The chosen node
----------------
-
-The chosen node does not represent a real device, but serves as a place
-for passing data between firmware and the operating system, like boot
-arguments. Data in the chosen node does not represent the hardware.
-
-The following properties are recognized:
-
-
-kaslr-seed
------------
-
-This property is used when booting with CONFIG_RANDOMIZE_BASE as the
-entropy used to randomize the kernel image base address location. Since
-it is used directly, this value is intended only for KASLR, and should
-not be used for other purposes (as it may leak information about KASLR
-offsets). It is parsed as a u64 value, e.g.
-
-/ {
-	chosen {
-		kaslr-seed = <0xfeedbeef 0xc0def00d>;
-	};
-};
-
-Note that if this property is set from UEFI (or a bootloader in EFI
-mode) when EFI_RNG_PROTOCOL is supported, it will be overwritten by
-the Linux EFI stub (which will populate the property itself, using
-EFI_RNG_PROTOCOL).
-
-stdout-path
------------
-
-Device trees may specify the device to be used for boot console output
-with a stdout-path property under /chosen, as described in the Devicetree
-Specification, e.g.
-
-/ {
-	chosen {
-		stdout-path = "/serial@f00:115200";
-	};
-
-	serial@f00 {
-		compatible = "vendor,some-uart";
-		reg = <0xf00 0x10>;
-	};
-};
-
-If the character ":" is present in the value, this terminates the path.
-The meaning of any characters following the ":" is device-specific, and
-must be specified in the relevant binding documentation.
-
-For UART devices, the preferred binding is a string in the form:
-
-	<baud>{<parity>{<bits>{<flow>}}}
-
-where
-
-	baud	- baud rate in decimal
-	parity	- 'n' (none), 'o', (odd) or 'e' (even)
-	bits	- number of data bits
-	flow	- 'r' (rts)
-
-For example: 115200n8r
-
-Implementation note: Linux will look for the property "linux,stdout-path" or
-on PowerPC "stdout" if "stdout-path" is not found.  However, the
-"linux,stdout-path" and "stdout" properties are deprecated. New platforms
-should only use the "stdout-path" property.
-
-linux,booted-from-kexec
------------------------
-
-This property is set (currently only on PowerPC, and only needed on
-book3e) by some versions of kexec-tools to tell the new kernel that it
-is being booted by kexec, as the booting environment may differ (e.g.
-a different secondary CPU release mechanism)
-
-linux,usable-memory-range
--------------------------
-
-This property holds a base address and size, describing a limited region in
-which memory may be considered available for use by the kernel. Memory outside
-of this range is not available for use.
-
-This property describes a limitation: memory within this range is only
-valid when also described through another mechanism that the kernel
-would otherwise use to determine available memory (e.g. memory nodes
-or the EFI memory map). Valid memory may be sparse within the range.
-e.g.
-
-/ {
-	chosen {
-		linux,usable-memory-range = <0x9 0xf0000000 0x0 0x10000000>;
-	};
-};
-
-The main usage is for crash dump kernel to identify its own usable
-memory and exclude, at its boot time, any other memory areas that are
-part of the panicked kernel's memory.
-
-While this property does not represent a real hardware, the address
-and the size are expressed in #address-cells and #size-cells,
-respectively, of the root node.
-
-linux,elfcorehdr
-----------------
-
-This property holds the memory range, the address and the size, of the elf
-core header which mainly describes the panicked kernel's memory layout as
-PT_LOAD segments of elf format.
-e.g.
-
-/ {
-	chosen {
-		linux,elfcorehdr = <0x9 0xfffff000 0x0 0x800>;
-	};
-};
-
-While this property does not represent a real hardware, the address
-and the size are expressed in #address-cells and #size-cells,
-respectively, of the root node.
-
-linux,initrd-start and linux,initrd-end
----------------------------------------
-
-These properties hold the physical start and end address of an initrd that's
-loaded by the bootloader. Note that linux,initrd-start is inclusive, but
-linux,initrd-end is exclusive.
-e.g.
-
-/ {
-	chosen {
-		linux,initrd-start = <0x82000000>;
-		linux,initrd-end = <0x82800000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
index 2d98f7c4d3bc..3b0548c34791 100644
--- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
+++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
@@ -20,23 +20,35 @@ properties:
   compatible:
     const: google,cros-ec-typec
 
-  connector:
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^connector@[0-9a-f]+$':
     $ref: /schemas/connector/usb-connector.yaml#
+    unevaluatedProperties: false
+    properties:
+      reg:
+        maxItems: 1
 
 required:
   - compatible
 
-additionalProperties: true #fixme
+additionalProperties: false
 
 examples:
   - |+
-    spi0 {
+    spi {
       #address-cells = <1>;
       #size-cells = <0>;
 
       cros_ec: ec@0 {
         compatible = "google,cros-ec-spi";
         reg = <0>;
+        interrupts = <35 0>;
 
         typec {
           compatible = "google,cros-ec-typec";
diff --git a/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml b/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml
new file mode 100644
index 000000000000..c94ab8f9e0b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/chrome/google,cros-kbd-led-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS keyboard backlight LED driver.
+
+maintainers:
+  - Tzung-Bi Shih <tzungbi@kernel.org>
+
+properties:
+  compatible:
+    const: google,cros-kbd-led-backlight
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cros_ec: ec@0 {
+        compatible = "google,cros-ec-spi";
+        reg = <0>;
+        interrupts = <15 0>;
+
+        kbd-led-backlight {
+          compatible = "google,cros-kbd-led-backlight";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
index 983033fe5b17..5e942bccf277 100644
--- a/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
+++ b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/adi,axi-clkgen.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for Analog Devices AXI clkgen pcore clock generator
+title: Analog Devices AXI clkgen pcore clock generator
 
 maintainers:
   - Lars-Peter Clausen <lars@metafoo.de>
diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
new file mode 100644
index 000000000000..79b0752faa91
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EN7523 Clock
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <nbd@nbd.name>
+
+description: |
+  This node defines the System Control Unit of the EN7523 SoC,
+  a collection of registers configuring many different aspects of the SoC.
+
+  The clock driver uses it to read and configure settings of the
+  PLL controller, which provides clocks for the CPU, the bus and
+  other SoC internal peripherals.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify which clock they consume.
+
+  All these identifiers can be found in:
+  [1]: <include/dt-bindings/clock/en7523-clk.h>.
+
+  The clocks are provided inside a system controller node.
+
+properties:
+  compatible:
+    items:
+      - const: airoha,en7523-scu
+
+  reg:
+    maxItems: 2
+
+  "#clock-cells":
+    description:
+      The first cell indicates the clock number, see [1] for available
+      clocks.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/en7523-clk.h>
+    scu: system-controller@1fa20000 {
+      compatible = "airoha,en7523-scu";
+      reg = <0x1fa20000 0x400>,
+            <0x1fb00000 0x1000>;
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
index 558db4b6ed17..93587b700476 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ahb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ahb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 AHB Clock Device Tree Bindings
+title: Allwinner A10 AHB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
index b1e3d739beb2..e14e1aad9fd6 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 APB0 Bus Clock Device Tree Bindings
+title: Allwinner A10 APB0 Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
index 51b7a6d4ea54..8a4747ebe0ba 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-apb1-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-apb1-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 APB1 Bus Clock Device Tree Bindings
+title: Allwinner A10 APB1 Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
index d801158e15de..aa08dd49dd61 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-axi-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-axi-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 AXI Clock Device Tree Bindings
+title: Allwinner A10 AXI Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
index c4b7243ddcf2..1690b9d99c3d 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ccu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner Clock Control Unit Device Tree Bindings
+title: Allwinner Clock Control Unit
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -34,6 +34,8 @@ properties:
       - allwinner,sun8i-v3-ccu
       - allwinner,sun8i-v3s-ccu
       - allwinner,sun9i-a80-ccu
+      - allwinner,sun20i-d1-ccu
+      - allwinner,sun20i-d1-r-ccu
       - allwinner,sun50i-a64-ccu
       - allwinner,sun50i-a64-r-ccu
       - allwinner,sun50i-a100-ccu
@@ -79,6 +81,7 @@ if:
       enum:
         - allwinner,sun8i-a83t-r-ccu
         - allwinner,sun8i-h3-r-ccu
+        - allwinner,sun20i-d1-r-ccu
         - allwinner,sun50i-a64-r-ccu
         - allwinner,sun50i-a100-r-ccu
         - allwinner,sun50i-h6-r-ccu
@@ -99,6 +102,7 @@ else:
     properties:
       compatible:
         enum:
+          - allwinner,sun20i-d1-ccu
           - allwinner,sun50i-a100-ccu
           - allwinner,sun50i-h6-ccu
           - allwinner,sun50i-h616-ccu
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
index 0dfafba1a168..08d073520cfa 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-cpu-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-cpu-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 CPU Clock Device Tree Bindings
+title: Allwinner A10 CPU Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
index 7484a7ab7dea..e665e50c1785 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-display-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-display-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Clock Device Tree Bindings
+title: Allwinner A10 Display Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
index 9a37a357cb4e..c4714d0fbe07 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-gates-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Bus Gates Clock Device Tree Bindings
+title: Allwinner A10 Bus Gates Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
index 18f131e262b4..e824e33489b6 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mbus-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mbus-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 MBUS Clock Device Tree Bindings
+title: Allwinner A10 MBUS Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
index 5199285a661a..c612f94befb9 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mmc-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mmc-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Module 1 Clock Device Tree Bindings
+title: Allwinner A10 Module 1 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
index 3e2abe3e67c1..80ae3a7a588c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Module 0 Clock Device Tree Bindings
+title: Allwinner A10 Module 0 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
index 7ddb55c75cff..4f9a8d44d42a 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-mod1-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-mod1-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Module 1 Clock Device Tree Bindings
+title: Allwinner A10 Module 1 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
index c604822cda07..52a7b6e7124c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-osc-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Gatable Oscillator Clock Device Tree Bindings
+title: Allwinner A10 Gatable Oscillator Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
index e5d9d45dab8a..b13a1f21d5da 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll1-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll1-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 CPU PLL Device Tree Bindings
+title: Allwinner A10 CPU PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
index 4b80a42fb3da..418d207d23b8 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll3-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll3-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Video PLL Device Tree Bindings
+title: Allwinner A10 Video PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
index 415bd77de53d..76ef3f0c7f2c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll5-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll5-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 DRAM PLL Device Tree Bindings
+title: Allwinner A10 DRAM PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
index ec5652f76027..a94c93c90ece 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-pll6-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-pll6-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Peripheral PLL Device Tree Bindings
+title: Allwinner A10 Peripheral PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
index 0a335c615efd..6646b2a99fc1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-tcon-ch0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 TCON Channel 0 Clock Device Tree Bindings
+title: Allwinner A10 TCON Channel 0 Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
index cd95d25bfe7c..5103b675e488 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-usb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-usb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 USB Clock Device Tree Bindings
+title: Allwinner A10 USB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
index 5dfd0c1c27b4..80337e38d6e5 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ve-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun4i-a10-ve-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Video Engine Clock Device Tree Bindings
+title: Allwinner A10 Video Engine Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
index 99add7991c48..c6a6fbb6863b 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun5i-a13-ahb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun5i-a13-ahb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A13 AHB Clock Device Tree Bindings
+title: Allwinner A13 AHB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
index 5f377205af71..7d6a6a34d20c 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun6i-a31-pll6-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun6i-a31-pll6-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 Peripheral PLL Device Tree Bindings
+title: Allwinner A31 Peripheral PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
index 59e5dce1b65a..b6202de35707 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-gmac-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-gmac-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A20 GMAC TX Clock Device Tree Bindings
+title: Allwinner A20 GMAC TX Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
index c745733bcf04..fde7f7dc3d34 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun7i-a20-out-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-out-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A20 Output Clock Device Tree Bindings
+title: Allwinner A20 Output Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
index 3f995d2b30eb..70369bd633e4 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-a83t-de2-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun8i-a83t-de2-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t Display Engine 2/3 Clock Controller Device Tree Bindings
+title: Allwinner A83t Display Engine 2/3 Clock Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -24,10 +24,13 @@ properties:
       - const: allwinner,sun8i-v3s-de2-clk
       - const: allwinner,sun50i-a64-de2-clk
       - const: allwinner,sun50i-h5-de2-clk
-      - const: allwinner,sun50i-h6-de2-clk
+      - const: allwinner,sun50i-h6-de3-clk
       - items:
           - const: allwinner,sun8i-r40-de2-clk
           - const: allwinner,sun8i-h3-de2-clk
+      - items:
+          - const: allwinner,sun20i-d1-de2-clk
+          - const: allwinner,sun50i-h5-de2-clk
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
index 3eb2bf65b230..45b9e2c7c1d1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun8i-h3-bus-gates-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun8i-h3-bus-gates-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Bus Gates Clock Device Tree Bindings
+title: Allwinner A10 Bus Gates Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
index d178da90aaec..f0f65af8ae22 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-ahb-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-ahb-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 AHB Clock Device Tree Bindings
+title: Allwinner A80 AHB Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
index 0351c79bd221..e9f9bc8f5794 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-apb0-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-apb0-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 APB0 Bus Clock Device Tree Bindings
+title: Allwinner A80 APB0 Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
index 24d5b2f1a314..c48db2d49340 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-cpus-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-cpus-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 CPUS Clock Device Tree Bindings
+title: Allwinner A80 CPUS Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
index a82c7c7e942b..e9f81a343be1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-de-clks.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-de-clks.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 Display Engine Clock Controller Device Tree Bindings
+title: Allwinner A80 Display Engine Clock Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
index 43963c3062c8..d3ce5eb18d4e 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-gt-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 GT Bus Clock Device Tree Bindings
+title: Allwinner A80 GT Bus Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
index 20dc115fa211..65ee5afe83cc 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-mmc-config-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-mmc-config-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 MMC Configuration Clock Device Tree Bindings
+title: Allwinner A80 MMC Configuration Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
index b76bab6a30e9..261264a8aef6 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-pll4-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-pll4-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 Peripheral PLL Device Tree Bindings
+title: Allwinner A80 Peripheral PLL
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml
index 6532fb6821bc..515c15d5f661 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-clks.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-clks.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 USB Clock Controller Device Tree Bindings
+title: Allwinner A80 USB Clock Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
index 15218d10e78e..3f7b8d9511f1 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-mod-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-mod-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 USB Module Clock Device Tree Bindings
+title: Allwinner A80 USB Module Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
index 2569041684e6..0d49072d47ca 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-usb-phy-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/allwinner,sun9i-a80-usb-phy-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 USB PHY Clock Device Tree Bindings
+title: Allwinner A80 USB PHY Clock
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
index 4b8669f870ec..d98d95d8e8c9 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
+++ b/Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/amlogic,meson8-ddr-clkc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Amlogic DDR Clock Controller Device Tree Bindings
+title: Amlogic DDR Clock Controller
 
 maintainers:
   - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
diff --git a/Documentation/devicetree/bindings/clock/apple,nco.yaml b/Documentation/devicetree/bindings/clock/apple,nco.yaml
new file mode 100644
index 000000000000..8b8411dc42f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/apple,nco.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/apple,nco.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoCs' NCO block
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+description: |
+  The NCO (Numerically Controlled Oscillator) block found on Apple SoCs
+  such as the t8103 (M1) is a programmable clock generator performing
+  fractional division of a high frequency input clock.
+
+  It carries a number of independent channels and is typically used for
+  generation of audio bitclocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t6000-nco
+          - apple,t8103-nco
+          - apple,t8112-nco
+      - const: apple,nco
+
+  clocks:
+    description:
+      Specifies the reference clock from which the output clocks
+      are derived through fractional division.
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    nco_clkref: clock-ref {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <900000000>;
+      clock-output-names = "nco-ref";
+    };
+
+    nco: clock-controller@23b044000 {
+      compatible = "apple,t8103-nco", "apple,nco";
+      reg = <0x3b044000 0x14000>;
+      #clock-cells = <1>;
+      clocks = <&nco_clkref>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
index 118c5543e037..b5533f81307c 100644
--- a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
+++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
@@ -69,6 +69,10 @@ properties:
       - arm,impd1-vco1
       - arm,impd1-vco2
 
+  reg:
+    maxItems: 1
+    description: The VCO register
+
   clocks:
     description: Parent clock for the ICST VCO
     maxItems: 1
@@ -77,12 +81,13 @@ properties:
     maxItems: 1
 
   lock-offset:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: Offset to the unlocking register for the oscillator
 
   vco-offset:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: Offset to the VCO register for the oscillator
+    deprecated: true
 
 required:
   - "#clock-cells"
diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
index 228c9313df53..f0f9392470a6 100644
--- a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
@@ -61,16 +61,4 @@ examples:
         #clock-cells = <1>;
     };
 
-  # Example UART controller node that consumes clock generated by the clock controller:
-  - |
-    uart0: serial@58018000 {
-         compatible = "snps,dw-apb-uart";
-         reg = <0x58018000 0x2000>;
-         clocks = <&clk 45>, <&clk 46>;
-         clock-names = "baudclk", "apb_pclk";
-         interrupts = <0 9 4>;
-         reg-shift = <2>;
-         reg-io-width = <4>;
-    };
-
 ...
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
index 08543ecbe35b..2d40df2d34df 100644
--- a/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/brcm,bcm2711-dvp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM2711 HDMI DVP Device Tree Bindings
+title: Broadcom BCM2711 HDMI DVP
 
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml b/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml
new file mode 100644
index 000000000000..199818b2fb6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/brcm,bcm63268-timer-clocks.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/brcm,bcm63268-timer-clocks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM63268 Timer Clock and Reset Device Tree Bindings
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+properties:
+  compatible:
+    const: brcm,bcm63268-timer-clocks
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    timer_clk: clock-controller@100000ac {
+      compatible = "brcm,bcm63268-timer-clocks";
+      reg = <0x100000ac 0x4>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/calxeda.yaml b/Documentation/devicetree/bindings/clock/calxeda.yaml
index a34cbf3c9aaf..a88fbe20fef1 100644
--- a/Documentation/devicetree/bindings/clock/calxeda.yaml
+++ b/Documentation/devicetree/bindings/clock/calxeda.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/calxeda.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Device Tree Clock bindings for Calxeda highbank platform
+title: Calxeda highbank platform Clock Controller
 
 description: |
   This binding covers the Calxeda SoC internal peripheral and bus clocks
diff --git a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
index 7f5cf4001f76..998e5cce652f 100644
--- a/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/canaan,k210-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/canaan,k210-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Canaan Kendryte K210 Clock Device Tree Bindings
+title: Canaan Kendryte K210 Clock
 
 maintainers:
   - Damien Le Moal <damien.lemoal@wdc.com>
diff --git a/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml
new file mode 100644
index 000000000000..d416c374e853
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/cirrus,cs2000-cp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
+
+maintainers:
+  - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+description: |
+  The CS2000-CP is an extremely versatile system clocking device that
+  utilizes a programmable phase lock loop.
+
+  Link: https://www.cirrus.com/products/cs2000/
+
+properties:
+  compatible:
+    enum:
+      - cirrus,cs2000-cp
+
+  clocks:
+    description:
+      Common clock binding for CLK_IN, XTI/REF_CLK
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk_in
+      - const: ref_clk
+
+  '#clock-cells':
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  cirrus,aux-output-source:
+    description:
+      Specifies the function of the auxiliary clock output pin
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # CS2000CP_AUX_OUTPUT_REF_CLK:  ref_clk input
+      - 1 # CS2000CP_AUX_OUTPUT_CLK_IN:   clk_in input
+      - 2 # CS2000CP_AUX_OUTPUT_CLK_OUT:  clk_out output
+      - 3 # CS2000CP_AUX_OUTPUT_PLL_LOCK: pll lock status
+    default: 0
+
+  cirrus,clock-skip:
+    description:
+      This mode allows the PLL to maintain lock even when CLK_IN
+      has missing pulses for up to 20 ms.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  cirrus,dynamic-mode:
+    description:
+      In dynamic mode, the CLK_IN input is used to drive the
+      digital PLL of the silicon.
+      If not given, the static mode shall be used to derive the
+      output signal directly from the REF_CLK input.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/cirrus,cs2000-cp.h>
+
+    i2c@0 {
+      reg = <0x0 0x100>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-controller@4f {
+        #clock-cells = <0>;
+        compatible = "cirrus,cs2000-cp";
+        reg = <0x4f>;
+        clocks = <&rcar_sound 0>, <&x12_clk>;
+        clock-names = "clk_in", "ref_clk";
+        cirrus,aux-output-source = <CS2000CP_AUX_OUTPUT_CLK_OUT>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index f2ea53832ac6..6fe541368889 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -1,186 +1,2 @@
-This binding is a work-in-progress, and are based on some experimental
-work by benh[1].
-
-Sources of clock signal can be represented by any node in the device
-tree.  Those nodes are designated as clock providers.  Clock consumer
-nodes use a phandle and clock specifier pair to connect clock provider
-outputs to clock inputs.  Similar to the gpio specifiers, a clock
-specifier is an array of zero, one or more cells identifying the clock
-output on a device.  The length of a clock specifier is defined by the
-value of a #clock-cells property in the clock provider node.
-
-[1] https://patchwork.ozlabs.org/patch/31551/
-
-==Clock providers==
-
-Required properties:
-#clock-cells:	   Number of cells in a clock specifier; Typically 0 for nodes
-		   with a single clock output and 1 for nodes with multiple
-		   clock outputs.
-
-Optional properties:
-clock-output-names: Recommended to be a list of strings of clock output signal
-		    names indexed by the first cell in the clock specifier.
-		    However, the meaning of clock-output-names is domain
-		    specific to the clock provider, and is only provided to
-		    encourage using the same meaning for the majority of clock
-		    providers.  This format may not work for clock providers
-		    using a complex clock specifier format.  In those cases it
-		    is recommended to omit this property and create a binding
-		    specific names property.
-
-		    Clock consumer nodes must never directly reference
-		    the provider's clock-output-names property.
-
-For example:
-
-    oscillator {
-        #clock-cells = <1>;
-        clock-output-names = "ckil", "ckih";
-    };
-
-- this node defines a device with two clock outputs, the first named
-  "ckil" and the second named "ckih".  Consumer nodes always reference
-  clocks by index. The names should reflect the clock output signal
-  names for the device.
-
-clock-indices:	   If the identifying number for the clocks in the node
-		   is not linear from zero, then this allows the mapping of
-		   identifiers into the clock-output-names array.
-
-For example, if we have two clocks <&oscillator 1> and <&oscillator 3>:
-
-	oscillator {
-		compatible = "myclocktype";
-		#clock-cells = <1>;
-		clock-indices = <1>, <3>;
-		clock-output-names = "clka", "clkb";
-	}
-
-	This ensures we do not have any empty strings in clock-output-names
-
-
-==Clock consumers==
-
-Required properties:
-clocks:		List of phandle and clock specifier pairs, one pair
-		for each clock input to the device.  Note: if the
-		clock provider specifies '0' for #clock-cells, then
-		only the phandle portion of the pair will appear.
-
-Optional properties:
-clock-names:	List of clock input name strings sorted in the same
-		order as the clocks property.  Consumers drivers
-		will use clock-names to match clock input names
-		with clocks specifiers.
-clock-ranges:	Empty property indicating that child nodes can inherit named
-		clocks from this node. Useful for bus nodes to provide a
-		clock to their children.
-
-For example:
-
-    device {
-        clocks = <&osc 1>, <&ref 0>;
-        clock-names = "baud", "register";
-    };
-
-
-This represents a device with two clock inputs, named "baud" and "register".
-The baud clock is connected to output 1 of the &osc device, and the register
-clock is connected to output 0 of the &ref.
-
-==Example==
-
-    /* external oscillator */
-    osc: oscillator {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency  = <32678>;
-        clock-output-names = "osc";
-    };
-
-    /* phase-locked-loop device, generates a higher frequency clock
-     * from the external oscillator reference */
-    pll: pll@4c000 {
-        compatible = "vendor,some-pll-interface"
-        #clock-cells = <1>;
-        clocks = <&osc 0>;
-        clock-names = "ref";
-        reg = <0x4c000 0x1000>;
-        clock-output-names = "pll", "pll-switched";
-    };
-
-    /* UART, using the low frequency oscillator for the baud clock,
-     * and the high frequency switched PLL output for register
-     * clocking */
-    uart@a000 {
-        compatible = "fsl,imx-uart";
-        reg = <0xa000 0x1000>;
-        interrupts = <33>;
-        clocks = <&osc 0>, <&pll 1>;
-        clock-names = "baud", "register";
-    };
-
-This DT fragment defines three devices: an external oscillator to provide a
-low-frequency reference clock, a PLL device to generate a higher frequency
-clock signal, and a UART.
-
-* The oscillator is fixed-frequency, and provides one clock output, named "osc".
-* The PLL is both a clock provider and a clock consumer. It uses the clock
-  signal generated by the external oscillator, and provides two output signals
-  ("pll" and "pll-switched").
-* The UART has its baud clock connected the external oscillator and its
-  register clock connected to the PLL clock (the "pll-switched" signal)
-
-==Assigned clock parents and rates==
-
-Some platforms may require initial configuration of default parent clocks
-and clock frequencies. Such a configuration can be specified in a device tree
-node through assigned-clocks, assigned-clock-parents and assigned-clock-rates
-properties. The assigned-clock-parents property should contain a list of parent
-clocks in the form of a phandle and clock specifier pair and the
-assigned-clock-rates property should contain a list of frequencies in Hz. Both
-these properties should correspond to the clocks listed in the assigned-clocks
-property.
-
-To skip setting parent or rate of a clock its corresponding entry should be
-set to 0, or can be omitted if it is not followed by any non-zero entry.
-
-    uart@a000 {
-        compatible = "fsl,imx-uart";
-        reg = <0xa000 0x1000>;
-        ...
-        clocks = <&osc 0>, <&pll 1>;
-        clock-names = "baud", "register";
-
-        assigned-clocks = <&clkcon 0>, <&pll 2>;
-        assigned-clock-parents = <&pll 2>;
-        assigned-clock-rates = <0>, <460800>;
-    };
-
-In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and
-the <&pll 2> clock is assigned a frequency value of 460800 Hz.
-
-Configuring a clock's parent and rate through the device node that consumes
-the clock can be done only for clocks that have a single user. Specifying
-conflicting parent or rate configuration in multiple consumer nodes for
-a shared clock is forbidden.
-
-Configuration of common clocks, which affect multiple consumer devices can
-be similarly specified in the clock provider node.
-
-==Protected clocks==
-
-Some platforms or firmwares may not fully expose all the clocks to the OS, such
-as in situations where those clks are used by drivers running in ARM secure
-execution levels. Such a configuration can be specified in device tree with the
-protected-clocks property in the form of a clock specifier list. This property should
-only be specified in the node that is providing the clocks being protected:
-
-   clock-controller@a000f000 {
-        compatible = "vendor,clk95;
-        reg = <0xa000f000 0x1000>
-        #clocks-cells = <1>;
-        ...
-        protected-clocks = <UART3_CLK>, <SPI5_CLK>;
-   };
+This file has moved to the clock binding schema:
+https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/clock/clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/cs2000-cp.txt b/Documentation/devicetree/bindings/clock/cs2000-cp.txt
deleted file mode 100644
index 54e6df0bee8a..000000000000
--- a/Documentation/devicetree/bindings/clock/cs2000-cp.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
-
-Required properties:
-
-- compatible:		"cirrus,cs2000-cp"
-- reg:			The chip select number on the I2C bus
-- clocks:		common clock binding for CLK_IN, XTI/REF_CLK
-- clock-names:		CLK_IN : clk_in, XTI/REF_CLK : ref_clk
-- #clock-cells:		must be <0>
-
-Example:
-
-&i2c2 {
-	...
-	cs2000: clk_multiplier@4f {
-		#clock-cells = <0>;
-		compatible = "cirrus,cs2000-cp";
-		reg = <0x4f>;
-		clocks = <&rcar_sound 0>, <&x12_clk>;
-		clock-names = "clk_in", "ref_clk";
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/efm32-clock.txt b/Documentation/devicetree/bindings/clock/efm32-clock.txt
deleted file mode 100644
index 263d293f6a10..000000000000
--- a/Documentation/devicetree/bindings/clock/efm32-clock.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-* Clock bindings for Energy Micro efm32 Giant Gecko's Clock Management Unit
-
-Required properties:
-- compatible: Should be "efm32gg,cmu"
-- reg: Base address and length of the register set
-- interrupts: Interrupt used by the CMU
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock ID in
-its "clocks" phandle cell. The header efm32-clk.h contains a list of available
-IDs.
diff --git a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
deleted file mode 100644
index c79d31f7f66e..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
+++ /dev/null
@@ -1,190 +0,0 @@
-* Samsung Exynos5260 Clock Controller
-
-Exynos5260 has 13 clock controllers which are instantiated
-independently from the device-tree. These clock controllers
-generate and supply clocks to various hardware blocks within
-the SoC.
-
-Each clock is assigned an identifier and client nodes can use
-this identifier to specify the clock which they consume. All
-available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5260-clk.h header and can be used in
-device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It
-is expected that they are defined using standard clock bindings
-with following clock-output-names:
-
- - "fin_pll" - PLL input clock from XXTI
- - "xrtcxti" - input clock from XRTCXTI
- - "ioclk_pcm_extclk" - pcm external operation clock
- - "ioclk_spdif_extclk" - spdif external operation clock
- - "ioclk_i2s_cdclk" - i2s0 codec clock
-
-Phy clocks:
-
-There are several clocks which are generated by specific PHYs.
-These clocks are fed into the clock controller and then routed to
-the hardware blocks. These clocks are defined as fixed clocks in the
-driver with following names:
-
- - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
- - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
- - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
- - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
- - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
- - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
- - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
- - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
- - "phyclk_dptx_phy_clk_div2"
- - "phyclk_mipi_dphy_4l_m_rxclkesc0"
- - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
- - "phyclk_usbhost20_phy_freeclk"
- - "phyclk_usbhost20_phy_clk48mohci"
- - "phyclk_usbdrd30_udrd30_pipe_pclk"
- - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
-
-Required Properties for Clock Controller:
-
- - compatible: should be one of the following.
-	1) "samsung,exynos5260-clock-top"
-	2) "samsung,exynos5260-clock-peri"
-	3) "samsung,exynos5260-clock-egl"
-	4) "samsung,exynos5260-clock-kfc"
-	5) "samsung,exynos5260-clock-g2d"
-	6) "samsung,exynos5260-clock-mif"
-	7) "samsung,exynos5260-clock-mfc"
-	8) "samsung,exynos5260-clock-g3d"
-	9) "samsung,exynos5260-clock-fsys"
-	10) "samsung,exynos5260-clock-aud"
-	11) "samsung,exynos5260-clock-isp"
-	12) "samsung,exynos5260-clock-gscl"
-	13) "samsung,exynos5260-clock-disp"
-
- - reg: physical base address of the controller and the length of
-	memory mapped region.
-
- - #clock-cells: should be 1.
-
- - clocks: list of clock identifiers which are fed as the input to
-	the given clock controller. Please refer the next section to find
-	the input clocks for a given controller.
-
- - clock-names: list of names of clocks which are fed as the input
-	to the given clock controller.
-
-Input clocks for top clock controller:
-	- fin_pll
-	- dout_mem_pll
-	- dout_bus_pll
-	- dout_media_pll
-
-Input clocks for peri clock controller:
-	- fin_pll
-	- ioclk_pcm_extclk
-	- ioclk_i2s_cdclk
-	- ioclk_spdif_extclk
-	- phyclk_hdmi_phy_ref_cko
-	- dout_aclk_peri_66
-	- dout_sclk_peri_uart0
-	- dout_sclk_peri_uart1
-	- dout_sclk_peri_uart2
-	- dout_sclk_peri_spi0_b
-	- dout_sclk_peri_spi1_b
-	- dout_sclk_peri_spi2_b
-	- dout_aclk_peri_aud
-	- dout_sclk_peri_spi0_b
-
-Input clocks for egl clock controller:
-	- fin_pll
-	- dout_bus_pll
-
-Input clocks for kfc clock controller:
-	- fin_pll
-	- dout_media_pll
-
-Input clocks for g2d clock controller:
-	- fin_pll
-	- dout_aclk_g2d_333
-
-Input clocks for mif clock controller:
-	- fin_pll
-
-Input clocks for mfc clock controller:
-	- fin_pll
-	- dout_aclk_mfc_333
-
-Input clocks for g3d clock controller:
-	- fin_pll
-
-Input clocks for fsys clock controller:
-	- fin_pll
-	- phyclk_usbhost20_phy_phyclock
-	- phyclk_usbhost20_phy_freeclk
-	- phyclk_usbhost20_phy_clk48mohci
-	- phyclk_usbdrd30_udrd30_pipe_pclk
-	- phyclk_usbdrd30_udrd30_phyclock
-	- dout_aclk_fsys_200
-
-Input clocks for aud clock controller:
-	- fin_pll
-	- fout_aud_pll
-	- ioclk_i2s_cdclk
-	- ioclk_pcm_extclk
-
-Input clocks for isp clock controller:
-	- fin_pll
-	- dout_aclk_isp1_266
-	- dout_aclk_isp1_400
-	- mout_aclk_isp1_266
-
-Input clocks for gscl clock controller:
-	- fin_pll
-	- dout_aclk_gscl_400
-	- dout_aclk_gscl_333
-
-Input clocks for disp clock controller:
-	- fin_pll
-	- phyclk_dptx_phy_ch3_txd_clk
-	- phyclk_dptx_phy_ch2_txd_clk
-	- phyclk_dptx_phy_ch1_txd_clk
-	- phyclk_dptx_phy_ch0_txd_clk
-	- phyclk_hdmi_phy_tmds_clko
-	- phyclk_hdmi_phy_ref_clko
-	- phyclk_hdmi_phy_pixel_clko
-	- phyclk_hdmi_link_o_tmds_clkhi
-	- phyclk_mipi_dphy_4l_m_txbyte_clkhs
-	- phyclk_dptx_phy_o_ref_clk_24m
-	- phyclk_dptx_phy_clk_div2
-	- phyclk_mipi_dphy_4l_m_rxclkesc0
-	- phyclk_hdmi_phy_ref_cko
-	- ioclk_spdif_extclk
-	- dout_aclk_peri_aud
-	- dout_aclk_disp_222
-	- dout_sclk_disp_pixel
-	- dout_aclk_disp_333
-
-Example 1: An example of a clock controller node is listed below.
-
-	clock_mfc: clock-controller@11090000 {
-		compatible = "samsung,exynos5260-clock-mfc";
-		clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>;
-		clock-names = "fin_pll", "dout_aclk_mfc_333";
-		reg = <0x11090000 0x10000>;
-		#clock-cells = <1>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the
-		peri clock controller. Refer to the standard clock bindings for
-		information about 'clocks' and 'clock-names' property.
-
-	serial@12c00000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 146 0>;
-		clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
deleted file mode 100644
index 217beb27c30e..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Samsung Exynos5410 Clock Controller
-
-The Exynos5410 clock controller generates and supplies clock to various
-controllers within the Exynos5410 SoC.
-
-Required Properties:
-
-- compatible: should be "samsung,exynos5410-clock"
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-- clocks: should contain an entry specifying the root clock from external
-  oscillator supplied through XXTI or XusbXTI pin.  This clock should be
-  defined using standard clock bindings with "fin_pll" clock-output-name.
-  That clock is being passed internally to the 9 PLLs.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5410.h header and can be used in device
-tree sources.
-
-Example 1: An example of a clock controller node is listed below.
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5410-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-		clocks = <&fin_pll>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the clock
-	   controller. Refer to the standard clock bindings for information
-	   about 'clocks' and 'clock-names' property.
-
-	serial@12c20000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 51 0>;
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
deleted file mode 100644
index 183c327a7d6b..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ /dev/null
@@ -1,507 +0,0 @@
-* Samsung Exynos5433 CMU (Clock Management Units)
-
-The Exynos5433 clock controller generates and supplies clock to various
-controllers within the Exynos5433 SoC.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,exynos5433-cmu-top"   - clock controller compatible for CMU_TOP
-    which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
-    domains and bus clocks.
-  - "samsung,exynos5433-cmu-cpif"  - clock controller compatible for CMU_CPIF
-    which generates clocks for LLI (Low Latency Interface) IP.
-  - "samsung,exynos5433-cmu-mif"   - clock controller compatible for CMU_MIF
-    which generates clocks for DRAM Memory Controller domain.
-  - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC
-    which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs.
-  - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS
-    which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs.
-  - "samsung,exynos5433-cmu-fsys"  - clock controller compatible for CMU_FSYS
-    which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs.
-  - "samsung,exynos5433-cmu-g2d"   - clock controller compatible for CMU_G2D
-    which generates clocks for G2D/MDMA IPs.
-  - "samsung,exynos5433-cmu-disp"  - clock controller compatible for CMU_DISP
-    which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs.
-  - "samsung,exynos5433-cmu-aud"   - clock controller compatible for CMU_AUD
-    which generates clocks for Cortex-A5/BUS/AUDIO clocks.
-  - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1"
-    and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS
-    which generates global data buses clock and global peripheral buses clock.
-  - "samsung,exynos5433-cmu-g3d"  - clock controller compatible for CMU_G3D
-    which generates clocks for 3D Graphics Engine IP.
-  - "samsung,exynos5433-cmu-gscl"  - clock controller compatible for CMU_GSCL
-    which generates clocks for GSCALER IPs.
-  - "samsung,exynos5433-cmu-apollo"- clock controller compatible for CMU_APOLLO
-    which generates clocks for Cortex-A53 Quad-core processor.
-  - "samsung,exynos5433-cmu-atlas" - clock controller compatible for CMU_ATLAS
-    which generates clocks for Cortex-A57 Quad-core processor, CoreSight and
-    L2 cache controller.
-  - "samsung,exynos5433-cmu-mscl" - clock controller compatible for CMU_MSCL
-    which generates clocks for M2M (Memory to Memory) scaler and JPEG IPs.
-  - "samsung,exynos5433-cmu-mfc"  - clock controller compatible for CMU_MFC
-    which generates clocks for MFC(Multi-Format Codec) IP.
-  - "samsung,exynos5433-cmu-hevc" - clock controller compatible for CMU_HEVC
-    which generates clocks for HEVC(High Efficiency Video Codec) decoder IP.
-  - "samsung,exynos5433-cmu-isp" - clock controller compatible for CMU_ISP
-    which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs.
-  - "samsung,exynos5433-cmu-cam0" - clock controller compatible for CMU_CAM0
-    which generates clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1}
-    IPs.
-  - "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1
-    which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs.
-  - "samsung,exynos5433-cmu-imem"   - clock controller compatible for CMU_IMEM
-    which generates clocks for SSS (Security SubSystem) and SlimSSS IPs.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-- clocks: list of the clock controller input clock identifiers,
-	from common clock bindings. Please refer the next section
-	to find the input clocks for a given controller.
-
-- clock-names: list of the clock controller input clock names,
-	as described in clock-bindings.txt.
-
-	Input clocks for top clock controller:
-		- oscclk
-		- sclk_mphy_pll
-		- sclk_mfc_pll
-		- sclk_bus_pll
-
-	Input clocks for cpif clock controller:
-		- oscclk
-
-	Input clocks for mif clock controller:
-		- oscclk
-		- sclk_mphy_pll
-
-	Input clocks for fsys clock controller:
-		- oscclk
-		- sclk_ufs_mphy
-		- aclk_fsys_200
-		- sclk_pcie_100_fsys
-		- sclk_ufsunipro_fsys
-		- sclk_mmc2_fsys
-		- sclk_mmc1_fsys
-		- sclk_mmc0_fsys
-		- sclk_usbhost30_fsys
-		- sclk_usbdrd30_fsys
-
-	Input clocks for g2d clock controller:
-		- oscclk
-		- aclk_g2d_266
-		- aclk_g2d_400
-
-	Input clocks for disp clock controller:
-		- oscclk
-		- sclk_dsim1_disp
-		- sclk_dsim0_disp
-		- sclk_dsd_disp
-		- sclk_decon_tv_eclk_disp
-		- sclk_decon_vclk_disp
-		- sclk_decon_eclk_disp
-		- sclk_decon_tv_vclk_disp
-		- aclk_disp_333
-
-	Input clocks for audio clock controller:
-		- oscclk
-		- fout_aud_pll
-
-	Input clocks for bus0 clock controller:
-		- aclk_bus0_400
-
-	Input clocks for bus1 clock controller:
-		- aclk_bus1_400
-
-	Input clocks for bus2 clock controller:
-		- oscclk
-		- aclk_bus2_400
-
-	Input clocks for g3d clock controller:
-		- oscclk
-		- aclk_g3d_400
-
-	Input clocks for gscl clock controller:
-		- oscclk
-		- aclk_gscl_111
-		- aclk_gscl_333
-
-	Input clocks for apollo clock controller:
-		- oscclk
-		- sclk_bus_pll_apollo
-
-	Input clocks for atlas clock controller:
-		- oscclk
-		- sclk_bus_pll_atlas
-
-	Input clocks for mscl clock controller:
-		- oscclk
-		- sclk_jpeg_mscl
-		- aclk_mscl_400
-
-	Input clocks for mfc clock controller:
-		- oscclk
-		- aclk_mfc_400
-
-	Input clocks for hevc clock controller:
-		- oscclk
-		- aclk_hevc_400
-
-	Input clocks for isp clock controller:
-		- oscclk
-		- aclk_isp_dis_400
-		- aclk_isp_400
-
-	Input clocks for cam0 clock controller:
-		- oscclk
-		- aclk_cam0_333
-		- aclk_cam0_400
-		- aclk_cam0_552
-
-	Input clocks for cam1 clock controller:
-		- oscclk
-		- sclk_isp_uart_cam1
-		- sclk_isp_spi1_cam1
-		- sclk_isp_spi0_cam1
-		- aclk_cam1_333
-		- aclk_cam1_400
-		- aclk_cam1_552
-
-	Input clocks for imem clock controller:
-		- oscclk
-		- aclk_imem_sssx_266
-		- aclk_imem_266
-		- aclk_imem_200
-
-Optional properties:
-  - power-domains: a phandle to respective power domain node as described by
-	generic PM domain bindings (see power/power_domain.txt for more
-	information).
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5433.h header and can be used in device
-tree sources.
-
-Example 1: Examples of 'oscclk' source clock node are listed below.
-
-	xxti: xxti {
-		compatible = "fixed-clock";
-		clock-output-names = "oscclk";
-		#clock-cells = <0>;
-	};
-
-Example 2: Examples of clock controller nodes are listed below.
-
-	cmu_top: clock-controller@10030000 {
-		compatible = "samsung,exynos5433-cmu-top";
-		reg = <0x10030000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_mphy_pll",
-			"sclk_mfc_pll",
-			"sclk_bus_pll";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_MPHY_PLL>,
-		       <&cmu_mif CLK_SCLK_MFC_PLL>,
-		       <&cmu_mif CLK_SCLK_BUS_PLL>;
-	};
-
-	cmu_cpif: clock-controller@10fc0000 {
-		compatible = "samsung,exynos5433-cmu-cpif";
-		reg = <0x10fc0000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk";
-		clocks = <&xxti>;
-	};
-
-	cmu_mif: clock-controller@105b0000 {
-		compatible = "samsung,exynos5433-cmu-mif";
-		reg = <0x105b0000 0x100c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_mphy_pll";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_MPHY_PLL>;
-	};
-
-	cmu_peric: clock-controller@14c80000 {
-		compatible = "samsung,exynos5433-cmu-peric";
-		reg = <0x14c80000 0x0b08>;
-		#clock-cells = <1>;
-	};
-
-	cmu_peris: clock-controller@10040000 {
-		compatible = "samsung,exynos5433-cmu-peris";
-		reg = <0x10040000 0x0b20>;
-		#clock-cells = <1>;
-	};
-
-	cmu_fsys: clock-controller@156e0000 {
-		compatible = "samsung,exynos5433-cmu-fsys";
-		reg = <0x156e0000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_ufs_mphy",
-			"aclk_fsys_200",
-			"sclk_pcie_100_fsys",
-			"sclk_ufsunipro_fsys",
-			"sclk_mmc2_fsys",
-			"sclk_mmc1_fsys",
-			"sclk_mmc0_fsys",
-			"sclk_usbhost30_fsys",
-			"sclk_usbdrd30_fsys";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_UFS_MPHY>,
-		       <&cmu_top CLK_ACLK_FSYS_200>,
-		       <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
-		       <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC2_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC1_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC0_FSYS>,
-		       <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
-		       <&cmu_top CLK_SCLK_USBDRD30_FSYS>;
-	};
-
-	cmu_g2d: clock-controller@12460000 {
-		compatible = "samsung,exynos5433-cmu-g2d";
-		reg = <0x12460000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_g2d_266",
-			"aclk_g2d_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_G2D_266>,
-		       <&cmu_top CLK_ACLK_G2D_400>;
-		power-domains = <&pd_g2d>;
-	};
-
-	cmu_disp: clock-controller@13b90000 {
-		compatible = "samsung,exynos5433-cmu-disp";
-		reg = <0x13b90000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_dsim1_disp",
-			"sclk_dsim0_disp",
-			"sclk_dsd_disp",
-			"sclk_decon_tv_eclk_disp",
-			"sclk_decon_vclk_disp",
-			"sclk_decon_eclk_disp",
-			"sclk_decon_tv_vclk_disp",
-			"aclk_disp_333";
-		clocks = <&xxti>,
-		       <&cmu_mif CLK_SCLK_DSIM1_DISP>,
-		       <&cmu_mif CLK_SCLK_DSIM0_DISP>,
-		       <&cmu_mif CLK_SCLK_DSD_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>,
-		       <&cmu_mif CLK_ACLK_DISP_333>;
-		power-domains = <&pd_disp>;
-	};
-
-	cmu_aud: clock-controller@114c0000 {
-		compatible = "samsung,exynos5433-cmu-aud";
-		reg = <0x114c0000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "fout_aud_pll";
-		clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>;
-		power-domains = <&pd_aud>;
-	};
-
-	cmu_bus0: clock-controller@13600000 {
-		compatible = "samsung,exynos5433-cmu-bus0";
-		reg = <0x13600000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "aclk_bus0_400";
-		clocks = <&cmu_top CLK_ACLK_BUS0_400>;
-	};
-
-	cmu_bus1: clock-controller@14800000 {
-		compatible = "samsung,exynos5433-cmu-bus1";
-		reg = <0x14800000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "aclk_bus1_400";
-		clocks = <&cmu_top CLK_ACLK_BUS1_400>;
-	};
-
-	cmu_bus2: clock-controller@13400000 {
-		compatible = "samsung,exynos5433-cmu-bus2";
-		reg = <0x13400000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_bus2_400";
-		clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>;
-	};
-
-	cmu_g3d: clock-controller@14aa0000 {
-		compatible = "samsung,exynos5433-cmu-g3d";
-		reg = <0x14aa0000 0x1000>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_g3d_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>;
-		power-domains = <&pd_g3d>;
-	};
-
-	cmu_gscl: clock-controller@13cf0000 {
-		compatible = "samsung,exynos5433-cmu-gscl";
-		reg = <0x13cf0000 0x0b10>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_gscl_111",
-			"aclk_gscl_333";
-		clocks = <&xxti>,
-			<&cmu_top CLK_ACLK_GSCL_111>,
-			<&cmu_top CLK_ACLK_GSCL_333>;
-		power-domains = <&pd_gscl>;
-	};
-
-	cmu_apollo: clock-controller@11900000 {
-		compatible = "samsung,exynos5433-cmu-apollo";
-		reg = <0x11900000 0x1088>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "sclk_bus_pll_apollo";
-		clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>;
-	};
-
-	cmu_atlas: clock-controller@11800000 {
-		compatible = "samsung,exynos5433-cmu-atlas";
-		reg = <0x11800000 0x1088>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "sclk_bus_pll_atlas";
-		clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
-	};
-
-	cmu_mscl: clock-controller@105d0000 {
-		compatible = "samsung,exynos5433-cmu-mscl";
-		reg = <0x105d0000 0x0b10>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_jpeg_mscl",
-			"aclk_mscl_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_SCLK_JPEG_MSCL>,
-		       <&cmu_top CLK_ACLK_MSCL_400>;
-		power-domains = <&pd_mscl>;
-	};
-
-	cmu_mfc: clock-controller@15280000 {
-		compatible = "samsung,exynos5433-cmu-mfc";
-		reg = <0x15280000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_mfc_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>;
-		power-domains = <&pd_mfc>;
-	};
-
-	cmu_hevc: clock-controller@14f80000 {
-		compatible = "samsung,exynos5433-cmu-hevc";
-		reg = <0x14f80000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_hevc_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>;
-		power-domains = <&pd_hevc>;
-	};
-
-	cmu_isp: clock-controller@146d0000 {
-		compatible = "samsung,exynos5433-cmu-isp";
-		reg = <0x146d0000 0x0b0c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_isp_dis_400",
-			"aclk_isp_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_ISP_DIS_400>,
-		       <&cmu_top CLK_ACLK_ISP_400>;
-		power-domains = <&pd_isp>;
-	};
-
-	cmu_cam0: clock-controller@120d0000 {
-		compatible = "samsung,exynos5433-cmu-cam0";
-		reg = <0x120d0000 0x0b0c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_cam0_333",
-			"aclk_cam0_400",
-			"aclk_cam0_552";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_CAM0_333>,
-		       <&cmu_top CLK_ACLK_CAM0_400>,
-		       <&cmu_top CLK_ACLK_CAM0_552>;
-		power-domains = <&pd_cam0>;
-	};
-
-	cmu_cam1: clock-controller@145d0000 {
-		compatible = "samsung,exynos5433-cmu-cam1";
-		reg = <0x145d0000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_isp_uart_cam1",
-			"sclk_isp_spi1_cam1",
-			"sclk_isp_spi0_cam1",
-			"aclk_cam1_333",
-			"aclk_cam1_400",
-			"aclk_cam1_552";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_SCLK_ISP_UART_CAM1>,
-		       <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>,
-		       <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>,
-		       <&cmu_top CLK_ACLK_CAM1_333>,
-		       <&cmu_top CLK_ACLK_CAM1_400>,
-		       <&cmu_top CLK_ACLK_CAM1_552>;
-		power-domains = <&pd_cam1>;
-	};
-
-	cmu_imem: clock-controller@11060000 {
-		compatible = "samsung,exynos5433-cmu-imem";
-		reg = <0x11060000 0x1000>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_imem_sssx_266",
-			"aclk_imem_266",
-			"aclk_imem_200";
-		clocks = <&xxti>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_266>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_200>;
-	};
-
-Example 3: UART controller node that consumes the clock generated by the clock
-	   controller.
-
-	serial_0: serial@14c10000 {
-		compatible = "samsung,exynos5433-uart";
-		reg = <0x14C10000 0x100>;
-		interrupts = <0 421 0>;
-		clocks = <&cmu_peric CLK_PCLK_UART0>,
-			 <&cmu_peric CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_bus>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
deleted file mode 100644
index 6bf1e7493f61..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos7-clock.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-* Samsung Exynos7 Clock Controller
-
-Exynos7 clock controller has various blocks which are instantiated
-independently from the device-tree. These clock controllers
-generate and supply clocks to various hardware blocks within
-the SoC.
-
-Each clock is assigned an identifier and client nodes can use
-this identifier to specify the clock which they consume. All
-available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos7-clk.h header and can be used in
-device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It
-is expected that they are defined using standard clock bindings
-with following clock-output-names:
-
- - "fin_pll" - PLL input clock from XXTI
-
-Required Properties for Clock Controller:
-
- - compatible: clock controllers will use one of the following
-	compatible strings to indicate the clock controller
-	functionality.
-
-	- "samsung,exynos7-clock-topc"
-	- "samsung,exynos7-clock-top0"
-	- "samsung,exynos7-clock-top1"
-	- "samsung,exynos7-clock-ccore"
-	- "samsung,exynos7-clock-peric0"
-	- "samsung,exynos7-clock-peric1"
-	- "samsung,exynos7-clock-peris"
-	- "samsung,exynos7-clock-fsys0"
-	- "samsung,exynos7-clock-fsys1"
-	- "samsung,exynos7-clock-mscl"
-	- "samsung,exynos7-clock-aud"
-
- - reg: physical base address of the controller and the length of
-	memory mapped region.
-
- - #clock-cells: should be 1.
-
- - clocks: list of clock identifiers which are fed as the input to
-	the given clock controller. Please refer the next section to
-	find the input clocks for a given controller.
-
-- clock-names: list of names of clocks which are fed as the input
-	to the given clock controller.
-
-Input clocks for top0 clock controller:
-	- fin_pll
-	- dout_sclk_bus0_pll
-	- dout_sclk_bus1_pll
-	- dout_sclk_cc_pll
-	- dout_sclk_mfc_pll
-	- dout_sclk_aud_pll
-
-Input clocks for top1 clock controller:
-	- fin_pll
-	- dout_sclk_bus0_pll
-	- dout_sclk_bus1_pll
-	- dout_sclk_cc_pll
-	- dout_sclk_mfc_pll
-
-Input clocks for ccore clock controller:
-	- fin_pll
-	- dout_aclk_ccore_133
-
-Input clocks for peric0 clock controller:
-	- fin_pll
-	- dout_aclk_peric0_66
-	- sclk_uart0
-
-Input clocks for peric1 clock controller:
-	- fin_pll
-	- dout_aclk_peric1_66
-	- sclk_uart1
-	- sclk_uart2
-	- sclk_uart3
-	- sclk_spi0
-	- sclk_spi1
-	- sclk_spi2
-	- sclk_spi3
-	- sclk_spi4
-	- sclk_i2s1
-	- sclk_pcm1
-	- sclk_spdif
-
-Input clocks for peris clock controller:
-	- fin_pll
-	- dout_aclk_peris_66
-
-Input clocks for fsys0 clock controller:
-	- fin_pll
-	- dout_aclk_fsys0_200
-	- dout_sclk_mmc2
-
-Input clocks for fsys1 clock controller:
-	- fin_pll
-	- dout_aclk_fsys1_200
-	- dout_sclk_mmc0
-	- dout_sclk_mmc1
-
-Input clocks for aud clock controller:
-	- fin_pll
-	- fout_aud_pll
diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-clock.yaml
index b657ecd0ef1c..b0a4fb8256e2 100644
--- a/Documentation/devicetree/bindings/clock/fixed-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/fixed-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/fixed-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for simple fixed-rate clock sources
+title: Simple fixed-rate clock sources
 
 maintainers:
   - Michael Turquette <mturquette@baylibre.com>
diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
index f415845b38dd..8f71ab300470 100644
--- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/fixed-factor-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for simple fixed factor rate clock sources
+title: Simple fixed factor rate clock sources
 
 maintainers:
   - Michael Turquette <mturquette@baylibre.com>
@@ -13,7 +13,6 @@ maintainers:
 properties:
   compatible:
     enum:
-      - allwinner,sun4i-a10-pll3-2x-clk
       - fixed-factor-clock
 
   "#clock-cells":
diff --git a/Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt
deleted file mode 100644
index c359367fd1a9..000000000000
--- a/Documentation/devicetree/bindings/clock/fixed-mmio-clock.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Binding for simple memory mapped io fixed-rate clock sources.
-The driver reads a clock frequency value from a single 32-bit memory mapped
-I/O register and registers it as a fixed rate clock.
-
-It was designed for test systems, like FPGA, not for complete, finished SoCs.
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "fixed-mmio-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- reg : Address and length of the clock value register set.
-
-Optional properties:
-- clock-output-names : From common clock binding.
-
-Example:
-sysclock: sysclock@fd020004 {
-	#clock-cells = <0>;
-	compatible = "fixed-mmio-clock";
-	reg = <0xfd020004 0x4>;
-};
diff --git a/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml
new file mode 100644
index 000000000000..e22fc272d023
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fixed-mmio-clock.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fixed-mmio-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple memory mapped IO fixed-rate clock sources
+
+description:
+  This binding describes a fixed-rate clock for which the frequency can
+  be read from a single 32-bit memory mapped I/O register.
+
+  It was designed for test systems, like FPGA, not for complete,
+  finished SoCs.
+
+maintainers:
+  - Jan Kotas <jank@cadence.com>
+
+properties:
+  compatible:
+    const: fixed-mmio-clock
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    sysclock: sysclock@fd020004 {
+      compatible = "fixed-mmio-clock";
+      #clock-cells = <0>;
+      reg = <0xfd020004 0x4>;
+      clock-output-names = "sysclk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/fsl,imx8m-anatop.yaml b/Documentation/devicetree/bindings/clock/fsl,imx8m-anatop.yaml
new file mode 100644
index 000000000000..bbd22e95b319
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,imx8m-anatop.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,imx8m-anatop.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8M Family Anatop Module
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  NXP i.MX8M Family anatop PLL module which generates PLL to CCM root.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx8mm-anatop
+          - fsl,imx8mq-anatop
+      - items:
+          - enum:
+              - fsl,imx8mn-anatop
+              - fsl,imx8mp-anatop
+          - const: fsl,imx8mm-anatop
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    anatop: clock-controller@30360000 {
+        compatible = "fsl,imx8mn-anatop", "fsl,imx8mm-anatop";
+        reg = <0x30360000 0x10000>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
index 9ac716dfa602..88dd9c18db92 100644
--- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
+++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/fsl,plldig.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP QorIQ Layerscape LS1028A Display PIXEL Clock Binding
+title: NXP QorIQ Layerscape LS1028A Display PIXEL Clock
 
 maintainers:
   - Wen He <wen.he_1@nxp.com>
diff --git a/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml b/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml
index fc3bdfdc091a..3bca9d11c148 100644
--- a/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/fsl,sai-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/fsl,sai-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale SAI bitclock-as-a-clock binding
+title: Freescale SAI bitclock-as-a-clock
 
 maintainers:
   - Michael Walle <michael@walle.cc>
diff --git a/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml
new file mode 100644
index 000000000000..36d4cfc3c2f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/fsl,scu-clk.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Clock Controller Based on SCU Message Protocol
+
+maintainers:
+  - Abel Vesa <abel.vesa@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+  This binding uses the common clock binding.
+  (Documentation/devicetree/bindings/clock/clock-bindings.txt)
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See the full list of clock IDs from
+  include/dt-bindings/clock/imx8qxp-clock.h
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8dxl-clk
+          - fsl,imx8qm-clk
+          - fsl,imx8qxp-clk
+      - const: fsl,scu-clk
+
+  '#clock-cells':
+    const: 2
+
+required:
+  - compatible
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+        compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+        #clock-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt b/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
deleted file mode 100644
index d3379ff9b84b..000000000000
--- a/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Binding for simple gpio gated clock.
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be "gpio-gate-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- enable-gpios : GPIO reference for enabling and disabling the clock.
-
-Optional properties:
-- clocks: Maximum of one parent clock is supported.
-
-Example:
-	clock {
-		compatible = "gpio-gate-clock";
-		clocks = <&parentclk>;
-		#clock-cells = <0>;
-		enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml b/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
new file mode 100644
index 000000000000..d09d0e3f0c6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/gpio-gate-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple GPIO clock gate
+
+maintainers:
+  - Jyri Sarha <jsarha@ti.com>
+
+properties:
+  compatible:
+    const: gpio-gate-clock
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+  enable-gpios:
+    description: GPIO reference for enabling and disabling the clock.
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - enable-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    clock {
+        compatible = "gpio-gate-clock";
+        clocks = <&parentclk>;
+        #clock-cells = <0>;
+        enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
index ffd6ae0eed64..a2c6eea9871d 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/idt,versaclock5.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for IDT VersaClock 5 and 6 programmable I2C clock generators
+title: IDT VersaClock 5 and 6 programmable I2C clock generators
 
 description: |
   The IDT VersaClock 5 and VersaClock 6 are programmable I2C
@@ -45,7 +45,7 @@ description: |
   The case where SH and SP are both 1 is likely not very interesting.
 
 maintainers:
-  - Luca Ceresoli <luca@lucaceresoli.net>
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
 
 properties:
   compatible:
@@ -54,8 +54,10 @@ properties:
       - idt,5p49v5925
       - idt,5p49v5933
       - idt,5p49v5935
+      - idt,5p49v60
       - idt,5p49v6901
       - idt,5p49v6965
+      - idt,5p49v6975
 
   reg:
     description: I2C device address
@@ -108,7 +110,7 @@ patternProperties:
     properties:
       idt,mode:
         description:
-          The output drive mode. Values defined in dt-bindings/clk/versaclock.h
+          The output drive mode. Values defined in dt-bindings/clock/versaclock.h
         $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 6
@@ -134,6 +136,7 @@ allOf:
           enum:
             - idt,5p49v5933
             - idt,5p49v5935
+            - idt,5p49v6975
     then:
       # Devices with builtin crystal + optional external input
       properties:
@@ -151,7 +154,7 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clk/versaclock.h>
+    #include <dt-bindings/clock/versaclock.h>
 
     /* 25MHz reference crystal */
     ref25: ref25m {
@@ -191,11 +194,4 @@ examples:
         };
     };
 
-    /* Consumer referencing the 5P49V5923 pin OUT1 */
-    consumer {
-        /* ... */
-        clocks = <&vc5 1>;
-        /* ... */
-    };
-
 ...
diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.yaml b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
index f4833a29b79e..7ade4c32aff3 100644
--- a/Documentation/devicetree/bindings/clock/imx1-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx1-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx1-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX1 CPUs
+title: Freescale i.MX1 CPUs Clock Controller
 
 maintainers:
   - Alexander Shiyan <shc_work@mail.ru>
@@ -40,12 +40,3 @@ examples:
         compatible = "fsl,imx1-ccm";
         reg = <0x0021b000 0x1000>;
     };
-
-    pwm@208000 {
-        #pwm-cells = <2>;
-        compatible = "fsl,imx1-pwm";
-        reg = <0x00208000 0x1000>;
-        interrupts = <34>;
-        clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
-        clock-names = "ipg", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.yaml b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
index 518ad9a4733c..79cc843703ec 100644
--- a/Documentation/devicetree/bindings/clock/imx21-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx21-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx21-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX21
+title: Freescale i.MX21 Clock Controller
 
 maintainers:
   - Alexander Shiyan <shc_work@mail.ru>
@@ -40,12 +40,3 @@ examples:
         reg = <0x10027000 0x800>;
         #clock-cells = <1>;
     };
-
-    serial@1000a000 {
-        compatible = "fsl,imx21-uart";
-        reg = <0x1000a000 0x1000>;
-        interrupts = <20>;
-        clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
-                 <&clks IMX21_CLK_PER1>;
-        clock-names = "ipg", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
index 5e296a00e14f..5e71c9219500 100644
--- a/Documentation/devicetree/bindings/clock/imx23-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx23-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX23
+title: Freescale i.MX23 Clock Controller
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
@@ -83,12 +83,3 @@ examples:
         reg = <0x80040000 0x2000>;
         #clock-cells = <1>;
     };
-
-    serial@8006c000 {
-        compatible = "fsl,imx23-auart";
-        reg = <0x8006c000 0x2000>;
-        interrupts = <24>;
-        clocks = <&clks 32>;
-        dmas = <&dma_apbx 6>, <&dma_apbx 7>;
-        dma-names = "rx", "tx";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.yaml b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
index 2a2b10778e72..c626a158590e 100644
--- a/Documentation/devicetree/bindings/clock/imx25-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx25-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX25
+title: Freescale i.MX25 Clock Controller
 
 maintainers:
   - Sascha Hauer <s.hauer@pengutronix.de>
@@ -176,11 +176,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    serial@43f90000 {
-        compatible = "fsl,imx25-uart", "fsl,imx21-uart";
-        reg = <0x43f90000 0x4000>;
-        interrupts = <45>;
-        clocks = <&clks 79>, <&clks 50>;
-        clock-names = "ipg", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.yaml b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
index 160268f24487..71d78a0b551f 100644
--- a/Documentation/devicetree/bindings/clock/imx27-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx27-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx27-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX27
+title: Freescale i.MX27 Clock Controller
 
 maintainers:
   - Fabio Estevam <festevam@gmail.com>
@@ -44,12 +44,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    serial@1000a000 {
-        compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-        reg = <0x1000a000 0x1000>;
-        interrupts = <20>;
-        clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
-                 <&clks IMX27_CLK_PER1_GATE>;
-        clock-names = "ipg", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
index f831b780f951..4aaad7b9c66e 100644
--- a/Documentation/devicetree/bindings/clock/imx28-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx28-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX28
+title: Freescale i.MX28 Clock Controller
 
 maintainers:
   - Shawn Guo <shawnguo@kernel.org>
@@ -106,12 +106,3 @@ examples:
         reg = <0x80040000 0x2000>;
         #clock-cells = <1>;
     };
-
-    serial@8006a000 {
-        compatible = "fsl,imx28-auart";
-        reg = <0x8006a000 0x2000>;
-        interrupts = <112>;
-        dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-        dma-names = "rx", "tx";
-        clocks = <&clks 45>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx31-clock.yaml b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
index d2336261c922..50a8498eef8a 100644
--- a/Documentation/devicetree/bindings/clock/imx31-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx31-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx31-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX31
+title: Freescale i.MX31 Clock Controller
 
 maintainers:
   - Fabio Estevam <festevam@gmail.com>
@@ -110,11 +110,3 @@ examples:
         interrupts = <31>, <53>;
         #clock-cells = <1>;
     };
-
-    serial@43f90000 {
-        compatible = "fsl,imx31-uart", "fsl,imx21-uart";
-        reg = <0x43f90000 0x4000>;
-        interrupts = <45>;
-        clocks = <&clks 10>, <&clks 30>;
-        clock-names = "ipg", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx35-clock.yaml b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
index 3e20ccaf8131..c063369de3ec 100644
--- a/Documentation/devicetree/bindings/clock/imx35-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx35-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx35-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX35
+title: Freescale i.MX35 Clock Controller
 
 maintainers:
   - Steffen Trumtrar <s.trumtrar@pengutronix.de>
@@ -129,11 +129,3 @@ examples:
         interrupts = <31>;
         #clock-cells = <1>;
     };
-
-    mmc@53fb4000 {
-        compatible = "fsl,imx35-esdhc";
-        reg = <0x53fb4000 0x4000>;
-        interrupts = <7>;
-        clocks = <&clks 9>, <&clks 8>, <&clks 43>;
-        clock-names = "ipg", "ahb", "per";
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
index b1740d7abe68..423c0142c1d3 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx5-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX5
+title: Freescale i.MX5 Clock Controller
 
 maintainers:
   - Fabio Estevam <festevam@gmail.com>
@@ -55,11 +55,4 @@ examples:
                      <0 72 IRQ_TYPE_LEVEL_HIGH>;
         #clock-cells = <1>;
     };
-
-    can@53fc8000 {
-        compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
-        reg = <0x53fc8000 0x4000>;
-        interrupts = <82>;
-        clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
-        clock-names = "ipg", "per";
-    };
+...
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
index 4f4637eddb8b..bae4fcb3aacc 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx6q-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX6 Quad
+title: Freescale i.MX6 Quad Clock Controller
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
index b83c8f43d664..c85ff6ea3d24 100644
--- a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx6sl-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX6 SoloLite
+title: Freescale i.MX6 SoloLite Clock Controller
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
index 484894a4b23f..6b549ed1493c 100644
--- a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx6sll-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX6 SLL
+title: Freescale i.MX6 SLL Clock Controller
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
index e6c795657c24..55dcad18b7c6 100644
--- a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx6sx-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX6 SoloX
+title: Freescale i.MX6 SoloX Clock Controller
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
index 6a51a3f51cd9..be54d4df5afa 100644
--- a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx6ul-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX6 UltraLite
+title: Freescale i.MX6 UltraLite Clock Controller
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
diff --git a/Documentation/devicetree/bindings/clock/imx7d-clock.yaml b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml
index cefb61db01a8..e7d8427e4957 100644
--- a/Documentation/devicetree/bindings/clock/imx7d-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx7d-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx7d-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX7 Dual
+title: Freescale i.MX7 Dual Clock Controller
 
 maintainers:
   - Frank Li <Frank.Li@nxp.com>
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
index 7caf5cee9199..76842038f52e 100644
--- a/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx7ulp-pcc-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx7ulp-pcc-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX7ULP Peripheral Clock Control (PCC) modules
+title: Freescale i.MX7ULP Peripheral Clock Control (PCC) modules Clock Controller
 
 maintainers:
   - A.s. Dong <aisheng.dong@nxp.com>
@@ -108,14 +108,3 @@ examples:
                        "upll", "sosc_bus_clk", "firc_bus_clk",
                        "rosc", "spll_bus_clk";
     };
-
-    mmc@40380000 {
-        compatible = "fsl,imx7ulp-usdhc";
-        reg = <0x40380000 0x10000>;
-        interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-                 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-                 <&pcc2 IMX7ULP_CLK_USDHC1>;
-        clock-names ="ipg", "ahb", "per";
-        bus-width = <4>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
index ee8efb4ed599..5e25bc6d1372 100644
--- a/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx7ulp-scg-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx7ulp-scg-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for Freescale i.MX7ULP System Clock Generation (SCG) modules
+title: Freescale i.MX7ULP System Clock Generation (SCG) modules Clock Controller
 
 maintainers:
   - A.s. Dong <aisheng.dong@nxp.com>
@@ -86,14 +86,3 @@ examples:
                       "firc", "upll";
         #clock-cells = <1>;
     };
-
-    mmc@40380000 {
-        compatible = "fsl,imx7ulp-usdhc";
-        reg = <0x40380000 0x10000>;
-        interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
-                 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
-                 <&pcc2 IMX7ULP_CLK_USDHC1>;
-        clock-names ="ipg", "ahb", "per";
-        bus-width = <4>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
index 625f573a7b90..0dbc1433fede 100644
--- a/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8m-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx8m-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX8M Family Clock Control Module Binding
+title: NXP i.MX8M Family Clock Control Module
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
@@ -55,8 +55,6 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 7
-          maxItems: 7
           items:
             - description: 32k osc
             - description: 25m osc
@@ -66,8 +64,6 @@ allOf:
             - description: ext3 clock input
             - description: ext4 clock input
         clock-names:
-          minItems: 7
-          maxItems: 7
           items:
             - const: ckil
             - const: osc_25m
@@ -112,7 +108,7 @@ examples:
     };
 
   - |
-    clock-controller@30390000 {
+    clock-controller@30380000 {
         compatible = "fsl,imx8mq-ccm";
         reg = <0x30380000 0x10000>;
         #clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
new file mode 100644
index 000000000000..ff9600474df2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8mp-audiomix.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8mp-audiomix.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP AudioMIX Block Control Binding
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  NXP i.MX8M Plus AudioMIX is dedicated clock muxing and gating IP
+  used to control Audio related clock on the SoC.
+
+properties:
+  compatible:
+    const: fsl,imx8mp-audio-blk-ctrl
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 7
+    maxItems: 7
+
+  clock-names:
+    items:
+      - const: ahb
+      - const: sai1
+      - const: sai2
+      - const: sai3
+      - const: sai5
+      - const: sai6
+      - const: sai7
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mp-clock.h
+      for the full list of i.MX8MP IMX8MP_CLK_AUDIOMIX_ clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    clock-controller@30e20000 {
+        compatible = "fsl,imx8mp-audio-blk-ctrl";
+        reg = <0x30e20000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>,
+                 <&clk IMX8MP_CLK_SAI1>,
+                 <&clk IMX8MP_CLK_SAI2>,
+                 <&clk IMX8MP_CLK_SAI3>,
+                 <&clk IMX8MP_CLK_SAI5>,
+                 <&clk IMX8MP_CLK_SAI6>,
+                 <&clk IMX8MP_CLK_SAI7>;
+        clock-names = "ahb",
+                      "sai1", "sai2", "sai3",
+                      "sai5", "sai6", "sai7";
+        power-domains = <&pgc_audio>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
index 0f6fe365ebf3..b207f95361b2 100644
--- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings
+title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock
 
 maintainers:
   - Aisheng Dong <aisheng.dong@nxp.com>
@@ -101,14 +101,3 @@ examples:
                              "sdhc0_lpcg_ahb_clk";
         power-domains = <&pd IMX_SC_R_SDHC_0>;
     };
-
-    mmc@5b010000 {
-        compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-        interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
-        reg = <0x5b010000 0x10000>;
-        clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>,
-                 <&sdhc0_lpcg IMX_LPCG_CLK_5>,
-                 <&sdhc0_lpcg IMX_LPCG_CLK_0>;
-        clock-names = "ipg", "ahb", "per";
-        power-domains = <&pd IMX_SC_R_SDHC_0>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml b/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml
new file mode 100644
index 000000000000..68a60cdc19af
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8ulp-cgc-clock.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8ulp-cgc-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8ULP Clock Generation & Control(CGC) Module
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description: |
+  On i.MX8ULP, The clock sources generation, distribution and management is
+  under the control of several CGCs & PCCs modules. The CGC modules generate
+  and distribute clocks on the device.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8ulp-cgc1
+      - fsl,imx8ulp-cgc2
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Generation & Control Module node:
+  - |
+    clock-controller@292c0000 {
+        compatible = "fsl,imx8ulp-cgc1";
+        reg = <0x292c0000 0x10000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml b/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml
new file mode 100644
index 000000000000..d0b0792fe7ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8ulp-pcc-clock.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8ulp-pcc-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8ULP Peripheral Clock Controller(PCC) Module
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description: |
+  On i.MX8ULP, The clock sources generation, distribution and management is
+  under the control of several CGCs & PCCs modules. The PCC modules control
+  software reset, clock selection, optional division and clock gating mode
+  for peripherals.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8ulp-pcc3
+      - fsl,imx8ulp-pcc4
+      - fsl,imx8ulp-pcc5
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  # Peripheral Clock Control Module node:
+  - |
+    clock-controller@292d0000 {
+        compatible = "fsl,imx8ulp-pcc3";
+        reg = <0x292d0000 0x10000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/imx93-clock.yaml b/Documentation/devicetree/bindings/clock/imx93-clock.yaml
new file mode 100644
index 000000000000..ccb53c6b96c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx93-clock.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx93-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX93 Clock Control Module
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+description: |
+  i.MX93 clock control module is an integrated clock controller, which
+  includes clock generator, clock gate and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx93-ccm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      specify the external clocks used by the CCM module.
+    items:
+      - description: 32k osc
+      - description: 24m osc
+      - description: ext1 clock input
+
+  clock-names:
+    description:
+      specify the external clocks names used by the CCM module.
+    items:
+      - const: osc_32k
+      - const: osc_24m
+      - const: clk_ext1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See include/dt-bindings/clock/imx93-clock.h for the full list of
+      i.MX93 clock IDs.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Control Module node:
+  - |
+    clock-controller@44450000 {
+        compatible = "fsl,imx93-ccm";
+        reg = <0x44450000 0x10000>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml
new file mode 100644
index 000000000000..777af4aad4b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imxrt1050-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imxrt1050-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MXRT Clock Controller
+
+maintainers:
+  - Giulio Benetti <giulio.benetti@benettiengineering.com>
+  - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description: |
+  The clock consumer should specify the desired clock by having the clock
+  ID in its "clocks" phandle cell. See include/dt-bindings/clock/imxrt*-clock.h
+  for the full list of i.MXRT clock IDs.
+
+properties:
+  compatible:
+    const: fsl,imxrt1050-ccm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    description: 24m osc
+    maxItems: 1
+
+  clock-names:
+    const: osc
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imxrt1050-clock.h>
+
+    clks: clock-controller@400fc000 {
+        compatible = "fsl,imxrt1050-ccm";
+        reg = <0x400fc000 0x4000>;
+        interrupts = <95>, <96>;
+        clocks = <&osc>;
+        clock-names = "osc";
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
index 6e80dbc8b8b9..9e733b10c392 100644
--- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/ingenic,cgu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs CGU devicetree bindings
+title: Ingenic SoCs CGU
 
 description: |
   The CGU in an Ingenic SoC provides all the clocks generated on-chip. It
@@ -22,6 +22,7 @@ select:
         enum:
           - ingenic,jz4740-cgu
           - ingenic,jz4725b-cgu
+          - ingenic,jz4755-cgu
           - ingenic,jz4760-cgu
           - ingenic,jz4760b-cgu
           - ingenic,jz4770-cgu
@@ -51,6 +52,7 @@ properties:
       - enum:
           - ingenic,jz4740-cgu
           - ingenic,jz4725b-cgu
+          - ingenic,jz4755-cgu
           - ingenic,jz4760-cgu
           - ingenic,jz4760b-cgu
           - ingenic,jz4770-cgu
@@ -104,7 +106,7 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4770-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
     cgu: clock-controller@10000000 {
       compatible = "ingenic,jz4770-cgu", "simple-mfd";
       reg = <0x10000000 0x100>;
diff --git a/Documentation/devicetree/bindings/clock/intc_stratix10.txt b/Documentation/devicetree/bindings/clock/intc_stratix10.txt
deleted file mode 100644
index 9f4ec5cb5c6b..000000000000
--- a/Documentation/devicetree/bindings/clock/intc_stratix10.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Device Tree Clock bindings for Intel's SoCFPGA Stratix10 platform
-
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Required properties:
-- compatible : shall be
-	"intel,stratix10-clkmgr"
-
-- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
-
-- #clock-cells : from common clock binding, shall be set to 1.
-
-Example:
-	clkmgr: clock-controller@ffd10000 {
-		compatible = "intel,stratix10-clkmgr";
-		reg = <0xffd10000 0x1000>;
-		#clock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/intel,agilex.yaml b/Documentation/devicetree/bindings/clock/intel,agilex.yaml
index cf5a9eb803e6..3745ba8dbd76 100644
--- a/Documentation/devicetree/bindings/clock/intel,agilex.yaml
+++ b/Documentation/devicetree/bindings/clock/intel,agilex.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/intel,agilex.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel SoCFPGA Agilex platform clock controller binding
+title: Intel SoCFPGA Agilex platform clock controller
 
 maintainers:
   - Dinh Nguyen <dinguyen@kernel.org>
diff --git a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml
index f3e1a700a2ca..76609a390429 100644
--- a/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml
+++ b/Documentation/devicetree/bindings/clock/intel,cgu-lgm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/intel,cgu-lgm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Lightning Mountain SoC's Clock Controller(CGU) Binding
+title: Intel Lightning Mountain SoC's Clock Controller(CGU)
 
 maintainers:
   - Rahul Tanwar <rahul.tanwar@linux.intel.com>
diff --git a/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml b/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml
index 8f45976e946e..e000116a51a4 100644
--- a/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml
+++ b/Documentation/devicetree/bindings/clock/intel,easic-n5x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/intel,easic-n5x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel SoCFPGA eASIC N5X platform clock controller binding
+title: Intel SoCFPGA eASIC N5X platform clock controller
 
 maintainers:
   - Dinh Nguyen <dinguyen@kernel.org>
diff --git a/Documentation/devicetree/bindings/clock/intel,stratix10.yaml b/Documentation/devicetree/bindings/clock/intel,stratix10.yaml
new file mode 100644
index 000000000000..b4a8be213400
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/intel,stratix10.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/intel,stratix10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel SoCFPGA Stratix10 platform clock controller
+
+maintainers:
+  - Dinh Nguyen <dinguyen@kernel.org>
+
+properties:
+  compatible:
+    const: intel,stratix10-clkmgr
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@ffd10000 {
+        compatible = "intel,stratix10-clkmgr";
+        reg = <0xffd10000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/loongson,ls1x-clk.yaml b/Documentation/devicetree/bindings/clock/loongson,ls1x-clk.yaml
new file mode 100644
index 000000000000..01561a0f35d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/loongson,ls1x-clk.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/loongson,ls1x-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 Clock Controller
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls1b-clk
+      - loongson,ls1c-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    clkc: clock-controller@1fe78030 {
+        compatible = "loongson,ls1b-clk";
+        reg = <0x1fe78030 0x8>;
+
+        clocks = <&xtal>;
+        #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
new file mode 100644
index 000000000000..63a59015987e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/loongson,ls2k-clk.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/loongson,ls2k-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 SoC Clock Control Module
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+description: |
+  Loongson-2 SoC clock control module is an integrated clock controller, which
+  generates and supplies to all modules.
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k-clk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: 100m ref
+
+  clock-names:
+    items:
+      - const: ref_100m
+
+  '#clock-cells':
+    const: 1
+    description:
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell. See include/dt-bindings/clock/loongson,ls2k-clk.h
+      for the full list of Loongson-2 SoC clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ref_100m: clock-ref-100m {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <100000000>;
+        clock-output-names = "ref_100m";
+    };
+
+    clk: clock-controller@1fe00480 {
+        compatible = "loongson,ls2k-clk";
+        reg = <0x1fe00480 0x58>;
+        #clock-cells = <1>;
+        clocks = <&ref_100m>;
+        clock-names = "ref_100m";
+    };
diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
new file mode 100644
index 000000000000..175f5c8f2bc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,armada-3700-uart-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Marvell Armada 3720 UART clocks
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+
+properties:
+  compatible:
+    const: marvell,armada-3700-uart-clock
+
+  reg:
+    items:
+      - description: UART Clock Control Register
+      - description: UART 2 Baud Rate Divisor Register
+
+  clocks:
+    description: |
+      List of parent clocks suitable for UART from following set:
+        "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal"
+      UART clock can use one from this set and when more are provided
+      then kernel would choose and configure the most suitable one.
+      It is suggest to specify at least one TBG clock to achieve
+      baudrates above 230400 and also to specify clock which bootloader
+      used for UART (most probably xtal) for smooth boot log on UART.
+
+  clock-names:
+    items:
+      - const: TBG-A-P
+      - const: TBG-B-P
+      - const: TBG-A-S
+      - const: TBG-B-S
+      - const: xtal
+    minItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    uartclk: clock-controller@12010 {
+      compatible = "marvell,armada-3700-uart-clock";
+      reg = <0x12010 0x4>, <0x12210 0x4>;
+      clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>;
+      clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal";
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
index 3472b461ca93..c10849efb444 100644
--- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt
+++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
@@ -49,7 +49,7 @@ Example:
 		max77686: max77686@9 {
 			compatible = "maxim,max77686";
 			interrupt-parent = <&wakeup_eint>;
-			interrupts = <26 0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
 			reg = <0x09>;
 			#clock-cells = <1>;
 
@@ -74,7 +74,7 @@ Example:
 		max77802: max77802@9 {
 			compatible = "maxim,max77802";
 			interrupt-parent = <&wakeup_eint>;
-			interrupts = <26 0>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
 			reg = <0x09>;
 			#clock-cells = <1>;
 
diff --git a/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
new file mode 100644
index 000000000000..372c1d744bc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,apmixedsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek AP Mixedsys Controller
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description:
+  The Mediatek apmixedsys controller provides PLLs to the system.
+  The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6797-apmixedsys
+          - mediatek,mt7622-apmixedsys
+          - mediatek,mt7981-apmixedsys
+          - mediatek,mt7986-apmixedsys
+          - mediatek,mt8135-apmixedsys
+          - mediatek,mt8173-apmixedsys
+          - mediatek,mt8516-apmixedsys
+      - items:
+          - const: mediatek,mt7623-apmixedsys
+          - const: mediatek,mt2701-apmixedsys
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt2701-apmixedsys
+              - mediatek,mt2712-apmixedsys
+              - mediatek,mt6765-apmixedsys
+              - mediatek,mt6779-apmixedsys
+              - mediatek,mt6795-apmixedsys
+              - mediatek,mt7629-apmixedsys
+              - mediatek,mt8167-apmixedsys
+              - mediatek,mt8183-apmixedsys
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    apmixedsys: clock-controller@10209000 {
+        compatible = "mediatek,mt8173-apmixedsys";
+        reg = <0x10209000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml
new file mode 100644
index 000000000000..04469eabc8fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt6795-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt6795-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT6795
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6795-mfgcfg
+      - mediatek,mt6795-vdecsys
+      - mediatek,mt6795-vencsys
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mfgcfg: clock-controller@13000000 {
+            compatible = "mediatek,mt6795-mfgcfg";
+            reg = <0 0x13000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+
+        vdecsys: clock-controller@16000000 {
+            compatible = "mediatek,mt6795-vdecsys";
+            reg = <0 0x16000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+
+        vencsys: clock-controller@18000000 {
+            compatible = "mediatek,mt6795-vencsys";
+            reg = <0 0x18000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml
new file mode 100644
index 000000000000..378b761237d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt6795-sys-clock.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt6795-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT6795
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description:
+  The Mediatek system clock controller provides various clocks and system
+  configuration like reset and bus protection on MT6795.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt6795-apmixedsys
+          - mediatek,mt6795-infracfg
+          - mediatek,mt6795-pericfg
+          - mediatek,mt6795-topckgen
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        topckgen: clock-controller@10000000 {
+            compatible = "mediatek,mt6795-topckgen", "syscon";
+            reg = <0 0x10000000 0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
index 915f84efd763..b42f0f5c11b7 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/mediatek,mt7621-sysc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MT7621 Clock Device Tree Bindings
+title: MT7621 Clock
 
 maintainers:
   - Sergio Paracuellos <sergio.paracuellos@gmail.com>
@@ -22,6 +22,11 @@ description: |
 
   The clocks are provided inside a system controller node.
 
+  This node is also a reset provider for all the peripherals.
+
+  Reset related bits are defined in:
+  [2]: <include/dt-bindings/reset/mt7621-reset.h>.
+
 properties:
   compatible:
     items:
@@ -37,6 +42,12 @@ properties:
       clocks.
     const: 1
 
+  "#reset-cells":
+    description:
+      The first cell indicates the reset bit within the register, see
+      [2] for available resets.
+    const: 1
+
   ralink,memctl:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -61,6 +72,7 @@ examples:
       compatible = "mediatek,mt7621-sysc", "syscon";
       reg = <0x0 0x100>;
       #clock-cells = <1>;
+      #reset-cells = <1>;
       ralink,memctl = <&memc>;
       clock-output-names = "xtal", "cpu", "bus",
                            "50m", "125m", "150m",
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8186-fhctl.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8186-fhctl.yaml
new file mode 100644
index 000000000000..d00327d12e1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8186-fhctl.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8186-fhctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek frequency hopping and spread spectrum clocking control
+
+maintainers:
+  - Edward-JW Yang <edward-jw.yang@mediatek.com>
+
+description: |
+  Frequency hopping control (FHCTL) is a piece of hardware that control
+  some PLLs to adopt "hopping" mechanism to adjust their frequency.
+  Spread spectrum clocking (SSC) is another function provided by this hardware.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6795-fhctl
+      - mediatek,mt8173-fhctl
+      - mediatek,mt8186-fhctl
+      - mediatek,mt8192-fhctl
+      - mediatek,mt8195-fhctl
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Phandles of the PLL with FHCTL hardware capability.
+    minItems: 1
+    maxItems: 30
+
+  mediatek,hopping-ssc-percent:
+    description: The percentage of spread spectrum clocking for one PLL.
+    minItems: 1
+    maxItems: 30
+    items:
+      default: 0
+      minimum: 0
+      maximum: 8
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8186-clk.h>
+    fhctl: fhctl@1000ce00 {
+        compatible = "mediatek,mt8186-fhctl";
+        reg = <0x1000ce00 0x200>;
+        clocks = <&apmixedsys CLK_APMIXED_MSDCPLL>;
+        mediatek,hopping-ssc-percent = <3>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml
new file mode 100644
index 000000000000..d7214d97b2ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8188-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8188
+
+maintainers:
+  - Garmin Chang <garmin.chang@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8188-adsp-audio26m
+      - mediatek,mt8188-camsys
+      - mediatek,mt8188-camsys-rawa
+      - mediatek,mt8188-camsys-rawb
+      - mediatek,mt8188-camsys-yuva
+      - mediatek,mt8188-camsys-yuvb
+      - mediatek,mt8188-ccusys
+      - mediatek,mt8188-imgsys
+      - mediatek,mt8188-imgsys-wpe1
+      - mediatek,mt8188-imgsys-wpe2
+      - mediatek,mt8188-imgsys-wpe3
+      - mediatek,mt8188-imgsys1-dip-nr
+      - mediatek,mt8188-imgsys1-dip-top
+      - mediatek,mt8188-imp-iic-wrap-c
+      - mediatek,mt8188-imp-iic-wrap-en
+      - mediatek,mt8188-imp-iic-wrap-w
+      - mediatek,mt8188-ipesys
+      - mediatek,mt8188-mfgcfg
+      - mediatek,mt8188-vdecsys
+      - mediatek,mt8188-vdecsys-soc
+      - mediatek,mt8188-vencsys
+      - mediatek,mt8188-vppsys0
+      - mediatek,mt8188-vppsys1
+      - mediatek,mt8188-wpesys
+      - mediatek,mt8188-wpesys-vpp0
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11283000 {
+        compatible = "mediatek,mt8188-imp-iic-wrap-c";
+        reg = <0x11283000 0x1000>;
+        #clock-cells = <1>;
+    };
+
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml
new file mode 100644
index 000000000000..4cf8d3af9803
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8188-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8188
+
+maintainers:
+  - Garmin Chang <garmin.chang@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The apmixedsys provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provide the clock source to other IP blocks.
+  The infracfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+  The mcusys provides mux control to select the clock source in AP MCU.
+  The device nodes also provide the system control capacity for configuration.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8188-apmixedsys
+          - mediatek,mt8188-infracfg-ao
+          - mediatek,mt8188-pericfg-ao
+          - mediatek,mt8188-topckgen
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@10000000 {
+        compatible = "mediatek,mt8188-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml
new file mode 100644
index 000000000000..b327ecb4e524
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8365-clock.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8365-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Functional Clock Controller for MT8365
+
+maintainers:
+  - Markus Schneider-Pargmann <msp@baylibre.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8365-apu
+          - mediatek,mt8365-imgsys
+          - mediatek,mt8365-mfgcfg
+          - mediatek,mt8365-vdecsys
+          - mediatek,mt8365-vencsys
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    apu: clock-controller@19020000 {
+        compatible = "mediatek,mt8365-apu", "syscon";
+        reg = <0x19020000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml
new file mode 100644
index 000000000000..643f84660c8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt8365-sys-clock.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,mt8365-sys-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Clock Controller for MT8365
+
+maintainers:
+  - Markus Schneider-Pargmann <msp@baylibre.com>
+
+description:
+  The apmixedsys module provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provides the clock source to other IP blocks.
+  The infracfg_ao and pericfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8365-topckgen
+          - mediatek,mt8365-infracfg
+          - mediatek,mt8365-apmixedsys
+          - mediatek,mt8365-pericfg
+          - mediatek,mt8365-mcucfg
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: clock-controller@10000000 {
+        compatible = "mediatek,mt8365-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
new file mode 100644
index 000000000000..6d087ded7437
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mediatek,topckgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Top Clock Generator Controller
+
+maintainers:
+  - Michael Turquette <mturquette@baylibre.com>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description:
+  The Mediatek topckgen controller provides various clocks to the system.
+  The clock values can be found in <dt-bindings/clock/mt*-clk.h>.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6797-topckgen
+          - mediatek,mt7622-topckgen
+          - mediatek,mt8135-topckgen
+          - mediatek,mt8173-topckgen
+          - mediatek,mt8516-topckgen
+      - items:
+          - const: mediatek,mt7623-topckgen
+          - const: mediatek,mt2701-topckgen
+          - const: syscon
+      - items:
+          - enum:
+              - mediatek,mt2701-topckgen
+              - mediatek,mt2712-topckgen
+              - mediatek,mt6765-topckgen
+              - mediatek,mt6779-topckgen
+              - mediatek,mt6795-topckgen
+              - mediatek,mt7629-topckgen
+              - mediatek,mt7981-topckgen
+              - mediatek,mt7986-topckgen
+              - mediatek,mt8167-topckgen
+              - mediatek,mt8183-topckgen
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: clock-controller@10000000 {
+        compatible = "mediatek,mt8173-topckgen";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml b/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml
new file mode 100644
index 000000000000..df2bec188706
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,lan966x-gck.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,lan966x-gck.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966X Generic Clock Controller
+
+maintainers:
+  - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+
+description: |
+  The LAN966X Generic clock controller contains 3 PLLs - cpu_clk,
+  ddr_clk and sys_clk. This clock controller generates and supplies
+  clock to various peripherals within the SoC.
+
+properties:
+  compatible:
+    const: microchip,lan966x-gck
+
+  reg:
+    minItems: 1
+    items:
+      - description: Generic clock registers
+      - description: Optional gate clock registers
+
+  clocks:
+    items:
+      - description: CPU clock source
+      - description: DDR clock source
+      - description: System clock source
+
+  clock-names:
+    items:
+      - const: cpu
+      - const: ddr
+      - const: sys
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clks: clock-controller@e00c00a8 {
+        compatible = "microchip,lan966x-gck";
+        #clock-cells = <1>;
+        clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+        clock-names = "cpu", "ddr", "sys";
+        reg = <0xe00c00a8 0x38>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml
new file mode 100644
index 000000000000..f1770360798f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,mpfs-ccc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-ccc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC Fabric Clock Conditioning Circuitry
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+description: |
+  Microchip PolarFire SoC has 4 Clock Conditioning Circuitry blocks. Each of
+  these blocks contains two PLLs and 2 DLLs & are located in the four corners of
+  the FPGA. For more information see "PolarFire SoC FPGA Clocking Resources" at:
+  https://onlinedocs.microchip.com/pr/GUID-8F0CC4C0-0317-4262-89CA-CE7773ED1931-en-US-1/index.html
+
+properties:
+  compatible:
+    const: microchip,mpfs-ccc
+
+  reg:
+    items:
+      - description: PLL0's control registers
+      - description: PLL1's control registers
+      - description: DLL0's control registers
+      - description: DLL1's control registers
+
+  clocks:
+    description:
+      The CCC PLL's have two input clocks. It is required that even if the input
+      clocks are identical that both are provided.
+    minItems: 2
+    items:
+      - description: PLL0's refclk0
+      - description: PLL0's refclk1
+      - description: PLL1's refclk0
+      - description: PLL1's refclk1
+      - description: DLL0's refclk
+      - description: DLL1's refclk
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pll0_ref0
+      - const: pll0_ref1
+      - const: pll1_ref0
+      - const: pll1_ref1
+      - const: dll0_ref
+      - const: dll1_ref
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@38100000 {
+        compatible = "microchip,mpfs-ccc";
+        reg = <0x38010000 0x1000>, <0x38020000 0x1000>,
+              <0x39010000 0x1000>, <0x39020000 0x1000>;
+        #clock-cells = <1>;
+        clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+                  <&refclk_ccc>, <&refclk_ccc>;
+        clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+                      "dll0_ref", "dll1_ref";
+    };
diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml
new file mode 100644
index 000000000000..e4e1c31267d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/microchip,mpfs-clkcfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire Clock Control Module
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+description: |
+  Microchip PolarFire clock control (CLKCFG) is an integrated clock controller,
+  which gates and enables all peripheral clocks.
+
+  This device tree binding describes 33 gate clocks.  Clocks are referenced by
+  user nodes by the CLKCFG node phandle and the clock index in the group, from
+  0 to 32.
+
+properties:
+  compatible:
+    const: microchip,mpfs-clkcfg
+
+  reg:
+    items:
+      - description: |
+          clock config registers:
+          These registers contain enable, reset & divider tables for the, cpu,
+          axi, ahb and rtc/mtimer reference clocks as well as enable and reset
+          for the peripheral clocks.
+      - description: |
+          mss pll dri registers:
+          Block of registers responsible for dynamic reconfiguration of the mss
+          pll
+
+  clocks:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock consumer should specify the desired clock by having the clock
+      ID in its "clocks" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+
+  resets:
+    maxItems: 1
+
+  '#reset-cells':
+    description:
+      The AHB/AXI peripherals on the PolarFire SoC have reset support, so from
+      CLK_ENVM to CLK_CFM. The reset consumer should specify the desired
+      peripheral via the clock ID in its "resets" phandle cell.
+      See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list of
+      PolarFire clock IDs.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # Clock Config node:
+  - |
+    #include <dt-bindings/clock/microchip,mpfs-clock.h>
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            clkcfg: clock-controller@20002000 {
+                compatible = "microchip,mpfs-clkcfg";
+                reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
+                clocks = <&ref>;
+                #clock-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
index 6d39344d2b70..0af1c569eb32 100644
--- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/milbeaut-clock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Milbeaut SoCs Clock Controller Binding
+title: Milbeaut SoCs Clock Controller
 
 maintainers:
   - Taichi Sugaya <sugaya.taichi@socionext.com>
diff --git a/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml b/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml
new file mode 100644
index 000000000000..a9ad7ab5230c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/mstar,msc313-cpupll.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/mstar,msc313-cpupll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MStar/Sigmastar MSC313 CPU PLL
+
+maintainers:
+  - Daniel Palmer <daniel@thingy.jp>
+
+description: |
+  The MStar/SigmaStar MSC313 and later ARMv7 chips have a scalable
+  PLL that can be used as the clock source for the CPU(s).
+
+properties:
+  compatible:
+    const: mstar,msc313-cpupll
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mstar-msc313-mpll.h>
+    cpupll: cpupll@206400 {
+        compatible = "mstar,msc313-cpupll";
+        reg = <0x206400 0x200>;
+        #clock-cells = <1>;
+        clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
new file mode 100644
index 000000000000..b901ca13cd25
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/nuvoton,npcm845-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NPCM8XX Clock Controller
+
+maintainers:
+  - Tomer Maimon <tmaimon77@gmail.com>
+
+description: |
+  Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller, which
+  generates and supplies clocks to all modules within the BMC.
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm845-clk
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+    description:
+      See include/dt-bindings/clock/nuvoton,npcm8xx-clock.h for the full
+      list of NPCM8XX clock IDs.
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ahb {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@f0801000 {
+            compatible = "nuvoton,npcm845-clk";
+            reg = <0x0 0xf0801000 0x0 0x1000>;
+            #clock-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
index ec7ab1483652..1b2181f6d440 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml
@@ -106,10 +106,3 @@ examples:
         #clock-cells = <1>;
         #reset-cells = <1>;
     };
-
-    usb-controller@c5004000 {
-        compatible = "nvidia,tegra20-ehci";
-        reg = <0xc5004000 0x4000>;
-        clocks = <&car TEGRA124_CLK_USB2>;
-        resets = <&car TEGRA124_CLK_USB2>;
-    };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
index 958e0ad78c52..f7d347385b57 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
@@ -136,7 +136,7 @@ clock@70110000 {
 };
 
 /* pinmux nodes added for completeness. Binding doc can be found in:
- * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.txt
+ * Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml
  */
 
 pinmux: pinmux@700008d4 {
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
index 459d2a525393..bee2dd4b29bf 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml
@@ -42,6 +42,36 @@ properties:
   "#reset-cells":
     const: 1
 
+patternProperties:
+  "^(sclk)|(pll-[cem])$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - nvidia,tegra20-sclk
+          - nvidia,tegra30-sclk
+          - nvidia,tegra30-pllc
+          - nvidia,tegra30-plle
+          - nvidia,tegra30-pllm
+
+      operating-points-v2: true
+
+      clocks:
+        items:
+          - description: node's clock
+
+      power-domains:
+        maxItems: 1
+        description: phandle to the core SoC power domain
+
+    required:
+      - compatible
+      - operating-points-v2
+      - clocks
+      - power-domains
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
@@ -59,11 +89,11 @@ examples:
         reg = <0x60006000 0x1000>;
         #clock-cells = <1>;
         #reset-cells = <1>;
-    };
 
-    usb-controller@c5004000 {
-        compatible = "nvidia,tegra20-ehci";
-        reg = <0xc5004000 0x4000>;
-        clocks = <&car TEGRA20_CLK_USB2>;
-        resets = <&car TEGRA20_CLK_USB2>;
+        sclk {
+            compatible = "nvidia,tegra20-sclk";
+            operating-points-v2 = <&opp_table>;
+            clocks = <&tegra_car TEGRA20_CLK_SCLK>;
+            power-domains = <&domain>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/clock/pwm-clock.txt b/Documentation/devicetree/bindings/clock/pwm-clock.txt
deleted file mode 100644
index 83db876b3b90..000000000000
--- a/Documentation/devicetree/bindings/clock/pwm-clock.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Binding for an external clock signal driven by a PWM pin.
-
-This binding uses the common clock binding[1] and the common PWM binding[2].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/pwm/pwm.txt
-
-Required properties:
-- compatible : shall be "pwm-clock".
-- #clock-cells : from common clock binding; shall be set to 0.
-- pwms : from common PWM binding; this determines the clock frequency
-  via the period given in the PWM specifier.
-
-Optional properties:
-- clock-output-names : From common clock binding.
-- clock-frequency : Exact output frequency, in case the PWM period
-  is not exact but was rounded to nanoseconds.
-
-Example:
-	clock {
-		compatible = "pwm-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-		clock-output-names = "mipi_mclk";
-		pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */
-	};
diff --git a/Documentation/devicetree/bindings/clock/pwm-clock.yaml b/Documentation/devicetree/bindings/clock/pwm-clock.yaml
new file mode 100644
index 000000000000..f88ecb2995e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/pwm-clock.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/pwm-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: An external clock signal driven by a PWM pin.
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+properties:
+  compatible:
+    const: pwm-clock
+
+  '#clock-cells':
+    const: 0
+
+  clock-frequency:
+    description: Exact output frequency, in case the PWM period is not exact
+      but was rounded to nanoseconds.
+
+  clock-output-names:
+    maxItems: 1
+
+  pwms:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    clock {
+        compatible = "pwm-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+        clock-output-names = "mipi_mclk";
+        pwms = <&pwm2 0 40>; /* 1 / 40 ns = 25 MHz */
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
index fbd758470b88..659669bf224b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/clock/qcom,a53pll.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm A53 PLL Binding
+title: Qualcomm A53 PLL clock
 
 maintainers:
-  - Sivaprakash Murugesan <sivaprak@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
 
 description:
   The A53 PLL on few Qualcomm platforms is the main CPU PLL used used for
@@ -16,7 +16,9 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,ipq5332-a53pll
       - qcom,ipq6018-a53pll
+      - qcom,ipq8074-a53pll
       - qcom,msm8916-a53pll
       - qcom,msm8939-a53pll
 
@@ -44,14 +46,14 @@ required:
 additionalProperties: false
 
 examples:
-  #Example 1 - A53 PLL found on MSM8916 devices
+  # Example 1 - A53 PLL found on MSM8916 devices
   - |
     a53pll: clock@b016000 {
         compatible = "qcom,msm8916-a53pll";
         reg = <0xb016000 0x40>;
         #clock-cells = <0>;
     };
-  #Example 2 - A53 PLL found on IPQ6018 devices
+  # Example 2 - A53 PLL found on IPQ6018 devices
   - |
     a53pll_ipq: clock-controller@b116000 {
         compatible = "qcom,ipq6018-a53pll";
diff --git a/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml
index 8666e995725f..809c34eb7d5a 100644
--- a/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,a7pll.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/clock/qcom,a7pll.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm A7 PLL Binding
+title: Qualcomm A7 PLL clock
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 description:
-  The A7 PLL on the Qualcomm platforms like SDX55 is used to provide high
+  The A7 PLL on the Qualcomm platforms like SDX55, SDX65 is used to provide high
   frequency clock to the CPU.
 
 properties:
diff --git a/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml
index c40a74b5d672..8b8932bd5a92 100644
--- a/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,aoncc-sm8250.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/qcom,aoncc-sm8250.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for LPASS Always ON Clock Controller on SM8250 SoCs
+title: LPASS Always ON Clock Controller on SM8250 SoCs
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -17,7 +17,7 @@ description: |
 
 properties:
   compatible:
-    const: qcom,sm8250-lpass-aon
+    const: qcom,sm8250-lpass-aoncc
 
   reg:
     maxItems: 1
@@ -28,11 +28,13 @@ properties:
   clocks:
     items:
       - description: LPASS Core voting clock
+      - description: LPASS Audio codec voting clock
       - description: Glitch Free Mux register clock
 
   clock-names:
     items:
       - const: core
+      - const: audio
       - const: bus
 
 required:
@@ -50,9 +52,10 @@ examples:
     #include <dt-bindings/sound/qcom,q6afe.h>
     clock-controller@3800000 {
       #clock-cells = <1>;
-      compatible = "qcom,sm8250-lpass-aon";
+      compatible = "qcom,sm8250-lpass-aoncc";
       reg = <0x03380000 0x40000>;
       clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
                <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-      clock-names = "core", "bus";
+      clock-names = "core", "audio", "bus";
     };
diff --git a/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml
index 915d76206ad0..cfca888f6014 100644
--- a/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,audiocc-sm8250.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/qcom,audiocc-sm8250.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for LPASS Audio Clock Controller on SM8250 SoCs
+title: LPASS Audio Clock Controller on SM8250 SoCs
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -28,11 +28,13 @@ properties:
   clocks:
     items:
       - description: LPASS Core voting clock
+      - description: LPASS Audio codec voting clock
       - description: Glitch Free Mux register clock
 
   clock-names:
     items:
       - const: core
+      - const: audio
       - const: bus
 
 required:
@@ -53,6 +55,7 @@ examples:
       compatible = "qcom,sm8250-lpass-audiocc";
       reg = <0x03300000 0x30000>;
       clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+               <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
                <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-      clock-names = "core", "bus";
+      clock-names = "core", "audio", "bus";
     };
diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
index 9f239c3960d1..426335a2841c 100644
--- a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,camcc-sm8250.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Camera Clock & Reset Controller Binding for SM8250
+title: Qualcomm Camera Clock & Reset Controller on SM8250
 
 maintainers:
   - Jonathan Marek <jonathan@marek.ca>
 
 description: |
-  Qualcomm camera clock control module which supports the clocks, resets and
+  Qualcomm camera clock control module provides the clocks, resets and
   power domains on SM8250.
 
-  See also dt-bindings/clock/qcom,camcc-sm8250.h
+  See also:: include/dt-bindings/clock/qcom,camcc-sm8250.h
 
 properties:
   compatible:
@@ -21,12 +21,16 @@ properties:
 
   clocks:
     items:
+      - description: AHB
       - description: Board XO source
+      - description: Board active XO source
       - description: Sleep clock source
 
   clock-names:
     items:
+      - const: iface
       - const: bi_tcxo
+      - const: bi_tcxo_ao
       - const: sleep_clk
 
   '#clock-cells':
@@ -38,9 +42,18 @@ properties:
   '#power-domain-cells':
     const: 1
 
+  power-domains:
+    items:
+      - description: MMCX power domain
+
   reg:
     maxItems: 1
 
+  required-opps:
+    maxItems: 1
+    description:
+      OPP node describing required MMCX performance point.
+
 required:
   - compatible
   - reg
@@ -54,13 +67,16 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
     #include <dt-bindings/clock/qcom,rpmh.h>
     clock-controller@ad00000 {
       compatible = "qcom,sm8250-camcc";
       reg = <0x0ad00000 0x10000>;
-      clocks = <&rpmhcc RPMH_CXO_CLK>,
+      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
                <&sleep_clk>;
-      clock-names = "bi_tcxo", "sleep_clk";
+      clock-names = "iface", "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc.txt b/Documentation/devicetree/bindings/clock/qcom,camcc.txt
deleted file mode 100644
index c5eb6694fda9..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,camcc.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Qualcomm Camera Clock & Reset Controller Binding
-------------------------------------------------
-
-Required properties :
-- compatible : shall contain "qcom,sdm845-camcc".
-- reg : shall contain base register location and length.
-- #clock-cells : from common clock binding, shall contain 1.
-- #reset-cells : from common reset binding, shall contain 1.
-- #power-domain-cells : from generic power domain binding, shall contain 1.
-
-Example:
-	camcc: clock-controller@ad00000 {
-		compatible = "qcom,sdm845-camcc";
-		reg = <0xad00000 0x10000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-		#power-domain-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sc8280xp.yaml
new file mode 100644
index 000000000000..3cb996b2c9d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sc8280xp.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SC8280XP
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm display clock control module which supports the clocks, resets and
+  power domains for the two MDSS instances on SC8280XP.
+
+  See also:
+    include/dt-bindings/clock/qcom,dispcc-sc8280xp.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-dispcc0
+      - qcom,sc8280xp-dispcc1
+
+  clocks:
+    items:
+      - description: AHB interface clock,
+      - description: SoC CXO clock
+      - description: SoC sleep clock
+      - description: DisplayPort 0 link clock
+      - description: DisplayPort 0 VCO div clock
+      - description: DisplayPort 1 link clock
+      - description: DisplayPort 1 VCO div clock
+      - description: DisplayPort 2 link clock
+      - description: DisplayPort 2 VCO div clock
+      - description: DisplayPort 3 link clock
+      - description: DisplayPort 3 VCO div clock
+      - description: DSI 0 PLL byte clock
+      - description: DSI 0 PLL DSI clock
+      - description: DSI 1 PLL byte clock
+      - description: DSI 1 PLL DSI clock
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: MMCX power domain
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sc8280xp-dispcc0";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&gcc GCC_DISP_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>,
+               <&mdss0_dp_phy0 0>,
+               <&mdss0_dp_phy0 1>,
+               <&mdss0_dp_phy1 0>,
+               <&mdss0_dp_phy1 1>,
+               <&mdss0_dp_phy2 0>,
+               <&mdss0_dp_phy2 1>,
+               <&mdss0_dp_phy3 0>,
+               <&mdss0_dp_phy3 1>,
+               <&mdss0_dsi0_phy 0>,
+               <&mdss0_dsi0_phy 1>,
+               <&mdss0_dsi1_phy 0>,
+               <&mdss0_dsi1_phy 1>;
+      power-domains = <&rpmhpd SC8280XP_MMCX>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
new file mode 100644
index 000000000000..8a210c4c5f82
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6125.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6125.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller on SM6125
+
+maintainers:
+  - Martin Botka <martin.botka@somainline.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks and power domains
+  on SM6125.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sm6125.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6125-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+      - description: AHB config clock from GCC
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dsi1_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+      - const: cfg_ahb_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6125-dispcc";
+      reg = <0x5f00000 0x20000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>,
+               <&gcc GCC_DISP_AHB_CLK>;
+      clock-names = "bi_tcxo",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dsi1_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk",
+                    "cfg_ahb_clk";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml
new file mode 100644
index 000000000000..8efac3fb159f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm6350.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,dispcc-sm6350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SM6350
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM6350.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sm6350.h
+
+properties:
+  compatible:
+    const: qcom,sm6350-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+      - description: Link clock from DP PHY
+      - description: VCO DIV clock from DP PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: gcc_disp_gpll0_clk
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+      - const: dp_phy_pll_link_clk
+      - const: dp_phy_pll_vco_div_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm6350-dispcc";
+      reg = <0x0af00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>,
+               <&dp_phy 0>,
+               <&dp_phy 1>;
+      clock-names = "bi_tcxo",
+                    "gcc_disp_gpll0_clk",
+                    "dsi0_phy_pll_out_byteclk",
+                    "dsi0_phy_pll_out_dsiclk",
+                    "dp_phy_pll_link_clk",
+                    "dp_phy_pll_vco_div_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
index 6667261dc665..d6774db257f0 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -4,18 +4,19 @@
 $id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250
+title: Qualcomm Display Clock & Reset Controller on SM8150/SM8250/SM8350
 
 maintainers:
   - Jonathan Marek <jonathan@marek.ca>
 
 description: |
-  Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SM8150 and SM8250.
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8150/SM8250/SM8350.
 
-  See also:
-    dt-bindings/clock/qcom,dispcc-sm8150.h
-    dt-bindings/clock/qcom,dispcc-sm8250.h
+  See also::
+    include/dt-bindings/clock/qcom,dispcc-sm8150.h
+    include/dt-bindings/clock/qcom,dispcc-sm8250.h
+    include/dt-bindings/clock/qcom,dispcc-sm8350.h
 
 properties:
   compatible:
@@ -23,6 +24,7 @@ properties:
       - qcom,sc8180x-dispcc
       - qcom,sm8150-dispcc
       - qcom,sm8250-dispcc
+      - qcom,sm8350-dispcc
 
   clocks:
     items:
@@ -56,6 +58,16 @@ properties:
   reg:
     maxItems: 1
 
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -70,6 +82,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
     clock-controller@af00000 {
       compatible = "qcom,sm8250-dispcc";
       reg = <0x0af00000 0x10000>;
@@ -90,5 +103,7 @@ examples:
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
+      power-domains = <&rpmhpd SM8250_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
index 8e2eac6cbfb9..09cd7a786871 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -4,39 +4,53 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-apq8064.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for APQ8064
+title: Qualcomm Global Clock & Reset Controller on APQ8064/MSM8960
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on APQ8064.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on APQ8064.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-msm8960.h
-  - dt-bindings/reset/qcom,gcc-msm8960.h
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8960.h
+    include/dt-bindings/reset/qcom,gcc-msm8960.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
 
 properties:
   compatible:
-    const: qcom,gcc-apq8064
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
+    oneOf:
+      - items:
+          - enum:
+              - qcom,gcc-apq8064
+              - qcom,gcc-msm8960
+          - const: syscon
+      - enum:
+          - qcom,gcc-apq8064
+          - qcom,gcc-msm8960
+        deprecated: true
+
+  thermal-sensor:
+    description: child tsens device
+    $ref: /schemas/thermal/qcom-tsens.yaml#
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: cxo
+      - const: pxo
+      - const: pll4
 
   nvmem-cells:
     minItems: 1
     maxItems: 2
+    deprecated: true
     description:
       Qualcomm TSENS (thermal sensor device) on some devices can
       be part of GCC and hence the TSENS properties can also be part
@@ -46,39 +60,39 @@ properties:
 
   nvmem-cell-names:
     minItems: 1
+    deprecated: true
     items:
       - const: calib
       - const: calib_backup
 
   '#thermal-sensor-cells':
     const: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+    deprecated: true
 
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
-  - nvmem-cells
-  - nvmem-cell-names
-  - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     clock-controller@900000 {
-      compatible = "qcom,gcc-apq8064";
+      compatible = "qcom,gcc-apq8064", "syscon";
       reg = <0x00900000 0x4000>;
-      nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-      nvmem-cell-names = "calib", "calib_backup";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
-      #thermal-sensor-cells = <1>;
+
+      thermal-sensor {
+        compatible = "qcom,msm8960-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <0 178 4>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
new file mode 100644
index 000000000000..d84608269080
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8084.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on APQ8084
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on APQ8084.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-apq8084.h
+    include/dt-bindings/reset/qcom,gcc-apq8084.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-apq8084
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: UFS RX symbol 0 clock
+      - description: UFS RX symbol 1 clock
+      - description: UFS TX symbol 0 clock
+      - description: UFS TX symbol 1 clock
+      - description: SATA ASIC0 clock
+      - description: SATA RX clock
+      - description: PCIe PIPE clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
+      - const: ufs_tx_symbol_1_clk_src
+      - const: sata_asic0_clk
+      - const: sata_rx_clk
+      - const: pcie_pipe
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /* UFS PHY on APQ8084 is not supported (yet), so these bindings just serve an example */
+    clock-controller@fc400000 {
+        compatible = "qcom,gcc-apq8084";
+        reg = <0xfc400000 0x4000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+
+        clocks = <&xo_board>,
+                 <&sleep_clk>,
+                 <&ufsphy 0>,
+                 <&ufsphy 1>,
+                 <&ufsphy 2>,
+                 <&ufsphy 3>,
+                 <&sata 0>,
+                 <&sata 1>,
+                 <&pcie_phy>;
+        clock-names = "xo",
+                      "sleep_clk",
+                      "ufs_rx_symbol_0_clk_src",
+                      "ufs_rx_symbol_1_clk_src",
+                      "ufs_tx_symbol_0_clk_src",
+                      "ufs_tx_symbol_1_clk_src",
+                      "sata_asic0_clk",
+                      "sata_rx_clk",
+                      "pcie_pipe";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml
new file mode 100644
index 000000000000..6ebaef2288fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq4019.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq4019.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ4019
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+  - Robert Marko <robert.markoo@sartura.hr>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ4019.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-ipq4019.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-ipq4019
+
+  clocks:
+    items:
+      - description: board XO clock
+      - description: sleep clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-ipq4019";
+      reg = <0x1800000 0x60000>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+      clocks = <&xo>, <&sleep_clk>;
+      clock-names = "xo", "sleep_clk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
new file mode 100644
index 000000000000..93f3084b97c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ8064
+
+maintainers:
+  - Ansuel Smith <ansuelsmth@gmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ8064.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+    include/dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,gcc-ipq8064
+      - const: syscon
+
+  clocks:
+    minItems: 2
+    items:
+      - description: PXO source
+      - description: CXO source
+      - description: PLL4 from LCC
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pxo
+      - const: cxo
+      - const: pll4
+
+  thermal-sensor:
+    type: object
+
+    allOf:
+      - $ref: /schemas/thermal/qcom-tsens.yaml#
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gcc: clock-controller@900000 {
+      compatible = "qcom,gcc-ipq8064", "syscon";
+      reg = <0x00900000 0x4000>;
+      clocks = <&pxo_board>, <&cxo_board>, <&lcc PLL4>;
+      clock-names = "pxo", "cxo", "pll4";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+
+      tsens: thermal-sensor {
+        compatible = "qcom,ipq8064-tsens";
+
+        nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
+
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
index 98572b4a9b60..deef398a9872 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
@@ -4,43 +4,39 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-ipq8074.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Bindingfor IPQ8074
+title: Qualcomm Global Clock & Reset Controller on IPQ8074
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on IPQ8074.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ8074.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-ipq8074.h
+  See also:: include/dt-bindings/clock/qcom,gcc-ipq8074.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
 
 properties:
   compatible:
     const: qcom,gcc-ipq8074
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
+  clocks:
+    items:
+      - description: board XO clock
+      - description: sleep clock
 
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
 
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -48,6 +44,7 @@ examples:
       compatible = "qcom,gcc-ipq8074";
       reg = <0x01800000 0x80000>;
       #clock-cells = <1>;
+      #power-domain-cells = <1>;
       #reset-cells = <1>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml
new file mode 100644
index 000000000000..c9e985548621
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8660.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8660
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks and resets on
+  MSM8660
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8660.h
+    include/dt-bindings/reset/qcom,gcc-msm8660.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8660
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pxo
+      - const: cxo
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for MSM8974:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-msm8660";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      clocks = <&pxo_board>, <&cxo_board>;
+      clock-names = "pxo", "cxo";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml
new file mode 100644
index 000000000000..b91462587df5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8909.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8909.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8909, MSM8917 and QM215
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8909, MSM8917 or QM215.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8909.h
+    include/dt-bindings/clock/qcom,gcc-msm8917.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8909
+      - qcom,gcc-msm8917
+      - qcom,gcc-qm215
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: dsi0pll
+      - const: dsi0pllbyte
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gcc: clock-controller@1800000 {
+      compatible = "qcom,gcc-msm8909";
+      reg = <0x01800000 0x80000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      clocks = <&xo_board>, <&sleep_clk>, <&dsi0_phy 1>, <&dsi0_phy 0>;
+      clock-names = "xo", "sleep_clk", "dsi0pll", "dsi0pllbyte";
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml
new file mode 100644
index 000000000000..ad84c0f7680b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8916.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8916.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8916 and MSM8939
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8916 or MSM8939.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8916.h
+    include/dt-bindings/clock/qcom,gcc-msm8939.h
+    include/dt-bindings/reset/qcom,gcc-msm8916.h
+    include/dt-bindings/reset/qcom,gcc-msm8939.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8916
+      - qcom,gcc-msm8939
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+      - description: External MCLK clock
+      - description: External Primary I2S clock
+      - description: External Secondary I2S clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: ext_mclk
+      - const: ext_pri_i2s
+      - const: ext_sec_i2s
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8916";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x300000 0x90000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml
new file mode 100644
index 000000000000..1927aecc86bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8974.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8974.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8974 (including Pro) and MSM8226
+  Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8974 (all variants) and MSM8226.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+    include/dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
+
+$ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8226
+      - qcom,gcc-msm8974
+      - qcom,gcc-msm8974pro
+      - qcom,gcc-msm8974pro-ac
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@fc400000 {
+        compatible = "qcom,gcc-msm8974";
+        reg = <0x00100000 0x94000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+
+        clock-names = "xo", "sleep_clk";
+        clocks = <&xo_board>,
+                 <&sleep_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml
new file mode 100644
index 000000000000..d2186e25f55f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8976.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8976.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8976
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8976.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8976.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8976
+      - qcom,gcc-msm8976-v1.1
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Always-on XO source
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY1
+      - description: Byte clock from DSI PHY1
+
+  clock-names:
+    items:
+      - const: xo
+      - const: xo_a
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: dsi1pll
+      - const: dsi1pllbyte
+
+  vdd_gfx-supply:
+    description:
+      Phandle to voltage regulator providing power to the GX domain.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - vdd_gfx-supply
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,gcc-msm8976";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      reg = <0x1800000 0x80000>;
+
+      clocks = <&xo_board>,
+               <&xo_board>,
+               <&dsi0_phy 1>,
+               <&dsi0_phy 0>,
+               <&dsi1_phy 1>,
+               <&dsi1_phy 0>;
+
+      clock-names = "xo",
+                    "xo_a",
+                    "dsi0pll",
+                    "dsi0pllbyte",
+                    "dsi1pll",
+                    "dsi1pllbyte";
+
+      vdd_gfx-supply = <&pm8004_s5>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
new file mode 100644
index 000000000000..8f0f20c1442a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8994.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-msm8994.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on MSM8994
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8994 and MSM8992.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8994.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-msm8992
+      - qcom,gcc-msm8994
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@300000 {
+      compatible = "qcom,gcc-msm8994";
+      reg = <0x00300000 0x90000>;
+      clocks = <&xo_board>, <&sleep_clk>;
+      clock-names = "xo", "sleep";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
index 5a5b2214f0ca..f77036ace31b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -4,59 +4,57 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-msm8996.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for MSM8996
+title: Qualcomm Global Clock & Reset Controller on MSM8996
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
+  Qualcomm global clock control module which provides the clocks, resets and
   power domains on MSM8996.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-msm8996.h
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8996.h
 
 properties:
   compatible:
     const: qcom,gcc-msm8996
 
   clocks:
+    minItems: 3
     items:
       - description: XO source
       - description: Second XO source
       - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: PCIe 1 PIPE clock (optional)
+      - description: PCIe 2 PIPE clock (optional)
+      - description: USB3 PIPE clock (optional)
+      - description: UFS RX symbol 0 clock (optional)
+      - description: UFS RX symbol 1 clock (optional)
+      - description: UFS TX symbol 0 clock (optional)
 
   clock-names:
+    minItems: 3
     items:
       - const: cxo
       - const: cxo2
       - const: sleep_clk
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+      - const: pcie_0_pipe_clk_src
+      - const: pcie_1_pipe_clk_src
+      - const: pcie_2_pipe_clk_src
+      - const: usb3_phy_pipe_clk_src
+      - const: ufs_rx_symbol_0_clk_src
+      - const: ufs_rx_symbol_1_clk_src
+      - const: ufs_tx_symbol_0_clk_src
 
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
index a0bb713929b0..3c9729050d6f 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-msm8998.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for MSM8998
+title: Qualcomm Global Clock & Reset Controller on MSM8998
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on MSM8998.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on MSM8998.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-msm8998.h
+  See also:: include/dt-bindings/clock/qcom,gcc-msm8998.h
 
 properties:
   compatible:
@@ -25,48 +24,25 @@ properties:
     items:
       - description: Board XO source
       - description: Sleep clock source
-      - description: USB 3.0 phy pipe clock
-      - description: UFS phy rx symbol clock for pipe 0
-      - description: UFS phy rx symbol clock for pipe 1
-      - description: UFS phy tx symbol clock
-      - description: PCIE phy pipe clock
+      - description: Audio reference clock (Optional clock)
+    minItems: 2
 
   clock-names:
     items:
       - const: xo
       - const: sleep_clk
-      - const: usb3_pipe
-      - const: ufs_rx_symbol0
-      - const: ufs_rx_symbol1
-      - const: ufs_tx_symbol0
-      - const: pcie0_pipe
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+      - const: aud_ref_clk # Optional clock
+    minItems: 2
 
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -79,17 +55,9 @@ examples:
       reg = <0x00100000 0xb0000>;
       clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
                <&sleep>,
-               <0>,
-               <0>,
-               <0>,
-               <0>,
                <0>;
       clock-names = "xo",
                     "sleep_clk",
-                    "usb3_pipe",
-                    "ufs_rx_symbol0",
-                    "ufs_rx_symbol1",
-                    "ufs_tx_symbol0",
-                    "pcie0_pipe";
+                    "aud_ref_clk";
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
new file mode 100644
index 000000000000..ae01e7749534
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-other.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-other.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains.
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-ipq6018.h
+    include/dt-bindings/reset/qcom,gcc-ipq6018.h
+    include/dt-bindings/clock/qcom,gcc-msm8953.h
+    include/dt-bindings/clock/qcom,gcc-mdm9607.h
+    include/dt-bindings/clock/qcom,gcc-mdm9615.h
+    include/dt-bindings/reset/qcom,gcc-mdm9615.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-ipq6018
+      - qcom,gcc-mdm9607
+      - qcom,gcc-msm8953
+      - qcom,gcc-mdm9615
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@900000 {
+      compatible = "qcom,gcc-mdm9607";
+      reg = <0x900000 0x4000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml
new file mode 100644
index 000000000000..c9bec4656f6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcm2290.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-qcm2290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on QCM2290
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on QCM2290.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-qcm2290.h
+
+properties:
+  compatible:
+    const: qcom,gcc-qcm2290
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+        compatible = "qcom,gcc-qcm2290";
+        reg = <0x01400000 0x1f0000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+        clock-names = "bi_tcxo", "sleep_clk";
+        clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
index ce06f3f8c3e3..b2256f81b265 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
@@ -4,43 +4,47 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-qcs404.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Bindingfor QCS404
+title: Qualcomm Global Clock & Reset Controller on QCS404
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on QCS404.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on QCS404.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-qcs404.h
+  See also:: include/dt-bindings/clock/qcom,gcc-qcs404.h
 
 properties:
   compatible:
     const: qcom,gcc-qcs404
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+      - description: PCIe 0 PIPE clock (optional)
+      - description: DSI phy instance 0 dsi clock
+      - description: DSI phy instance 0 byte clock
+      - description: HDMI phy PLL clock
+
+  clock-names:
+    items:
+      - const: cxo
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk_src
+      - const: dsi0pll
+      - const: dsi0pllbyte
+      - const: hdmi_pll
 
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -49,5 +53,6 @@ examples:
       reg = <0x01800000 0x80000>;
       #clock-cells = <1>;
       #reset-cells = <1>;
+      #power-domain-cells = <1>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
index a404c8fbee67..06dce0c6b7d0 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sc7180.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SC7180
+title: Qualcomm Global Clock & Reset Controller on SC7180
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SC7180.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SC7180.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sc7180.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sc7180.h
 
 properties:
   compatible:
@@ -33,32 +32,15 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
index 5693b8997570..947b47168cec 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7280.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sc7280.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SC7280
+title: Qualcomm Global Clock & Reset Controller on SC7280
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SC7280.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SC7280.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sc7280.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sc7280.h
 
 properties:
   compatible:
@@ -44,28 +43,15 @@ properties:
       - const: ufs_phy_tx_symbol_0_clk
       - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
index f03ef96e57fa..6c4846b34e4b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8180x.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sc8180x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SC8180x
+title: Qualcomm Global Clock & Reset Controller on SC8180x
 
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SC8180x.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SC8180x.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sc8180x.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sc8180x.h
 
 properties:
   compatible:
@@ -32,32 +31,15 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
new file mode 100644
index 000000000000..5681e535fede
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SC8280xp
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and
+  power domains on SC8280xp.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sc8280xp.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc8280xp
+
+  clocks:
+    items:
+      - description: XO reference clock
+      - description: Sleep clock
+      - description: UFS memory first RX symbol clock
+      - description: UFS memory second RX symbol clock
+      - description: UFS memory first TX symbol clock
+      - description: UFS card first RX symbol clock
+      - description: UFS card second RX symbol clock
+      - description: UFS card first TX symbol clock
+      - description: Primary USB SuperSpeed pipe clock
+      - description: USB4 PHY pipegmux clock source
+      - description: USB4 PHY DP gmux clock source
+      - description: USB4 PHY sys pipegmux clock source
+      - description: USB4 PHY PCIe pipe clock
+      - description: USB4 PHY router max pipe clock
+      - description: Primary USB4 RX0 clock
+      - description: Primary USB4 RX1 clock
+      - description: Secondary USB SuperSpeed pipe clock
+      - description: Second USB4 PHY pipegmux clock source
+      - description: Second USB4 PHY DP gmux clock source
+      - description: Second USB4 PHY sys pipegmux clock source
+      - description: Second USB4 PHY PCIe pipe clock
+      - description: Second USB4 PHY router max pipe clock
+      - description: Secondary USB4 RX0 clock
+      - description: Secondary USB4 RX1 clock
+      - description: Multiport USB first SuperSpeed pipe clock
+      - description: Multiport USB second SuperSpeed pipe clock
+      - description: PCIe 2a pipe clock
+      - description: PCIe 2b pipe clock
+      - description: PCIe 3a pipe clock
+      - description: PCIe 3b pipe clock
+      - description: PCIe 4 pipe clock
+      - description: First EMAC controller reference clock
+      - description: Second EMAC controller reference clock
+
+  power-domains:
+    items:
+      - description: CX domain
+
+  protected-clocks:
+    maxItems: 389
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc8280xp";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>,
+               <&ufs_phy_rx_symbol_0_clk>,
+               <&ufs_phy_rx_symbol_1_clk>,
+               <&ufs_phy_tx_symbol_0_clk>,
+               <&ufs_card_rx_symbol_0_clk>,
+               <&ufs_card_rx_symbol_1_clk>,
+               <&ufs_card_tx_symbol_0_clk>,
+               <&usb_0_ssphy>,
+               <&gcc_usb4_phy_pipegmux_clk_src>,
+               <&gcc_usb4_phy_dp_gmux_clk_src>,
+               <&gcc_usb4_phy_sys_pipegmux_clk_src>,
+               <&usb4_phy_gcc_usb4_pcie_pipe_clk>,
+               <&usb4_phy_gcc_usb4rtr_max_pipe_clk>,
+               <&qusb4phy_gcc_usb4_rx0_clk>,
+               <&qusb4phy_gcc_usb4_rx1_clk>,
+               <&usb_1_ssphy>,
+               <&gcc_usb4_1_phy_pipegmux_clk_src>,
+               <&gcc_usb4_1_phy_dp_gmux_clk_src>,
+               <&gcc_usb4_1_phy_sys_pipegmux_clk_src>,
+               <&usb4_1_phy_gcc_usb4_pcie_pipe_clk>,
+               <&usb4_1_phy_gcc_usb4rtr_max_pipe_clk>,
+               <&qusb4phy_1_gcc_usb4_rx0_clk>,
+               <&qusb4phy_1_gcc_usb4_rx1_clk>,
+               <&usb_2_ssphy>,
+               <&usb_3_ssphy>,
+               <&pcie2a_lane>,
+               <&pcie2b_lane>,
+               <&pcie3a_lane>,
+               <&pcie3b_lane>,
+               <&pcie4_lane>,
+               <&rxc0_ref_clk>,
+               <&rxc1_ref_clk>;
+      power-domains = <&rpmhpd SC8280XP_CX>;
+
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml
new file mode 100644
index 000000000000..52e7412aace5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm660.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdm660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM660/SDM630/SDM636 Global Clock & Reset Controller
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDM630, SDM636 and SDM660
+
+  See also::
+    include/dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
+
+$ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,gcc-sdm630
+      - qcom,gcc-sdm660
+
+  clocks:
+    items:
+      - description: XO source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: xo
+      - const: sleep_clk
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  # Example for GCC for SDM660:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+        compatible = "qcom,gcc-sdm660";
+        reg = <0x00100000 0x94000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+
+        clock-names = "xo", "sleep_clk";
+        clocks = <&xo_board>,
+                 <&sleep_clk>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
index d902f137ab17..68e1b7822fe0 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdm845.yaml
@@ -4,63 +4,81 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sdm845.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding
+title: Qualcomm Global Clock & Reset Controller on SDM670 and SDM845
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SDM845
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDM670 and SDM845
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sdm845.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sdm845.h
 
 properties:
   compatible:
-    const: qcom,gcc-sdm845
+    enum:
+      - qcom,gcc-sdm670
+      - qcom,gcc-sdm845
 
   clocks:
-    items:
-      - description: Board XO source
-      - description: Board active XO source
-      - description: Sleep clock source
-      - description: PCIE 0 Pipe clock source
-      - description: PCIE 1 Pipe clock source
+    minItems: 3
+    maxItems: 5
 
   clock-names:
-    items:
-      - const: bi_tcxo
-      - const: bi_tcxo_ao
-      - const: sleep_clk
-      - const: pcie_0_pipe_clk
-      - const: pcie_1_pipe_clk
+    minItems: 3
+    maxItems: 5
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
+  power-domains:
     maxItems: 1
 
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,gcc-sdm670
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+            - description: Sleep clock source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,gcc-sdm845
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+            - description: Sleep clock source
+            - description: PCIE 0 Pipe clock source
+            - description: PCIE 1 Pipe clock source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: sleep_clk
+            - const: pcie_0_pipe_clk
+            - const: pcie_1_pipe_clk
+
+unevaluatedProperties: false
 
 examples:
   # Example for GCC for SDM845:
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
index b0d1c65aa354..428e954d7638 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx55.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sdx55.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SDX55
+title: Qualcomm Global Clock & Reset Controller on SDX55
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
+  Qualcomm global clock control module provides the clocks, resets and
   power domains on SDX55
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sdx55.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sdx55.h
 
 properties:
   compatible:
@@ -25,38 +24,21 @@ properties:
     items:
       - description: Board XO source
       - description: Sleep clock source
-      - description: PLL test clock source (Optional clock)
-    minItems: 2
 
   clock-names:
     items:
       - const: bi_tcxo
       - const: sleep_clk
-      - const: core_bi_pll_test_se # Optional clock
-    minItems: 2
-
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
 
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -65,8 +47,9 @@ examples:
       compatible = "qcom,gcc-sdx55";
       reg = <0x00100000 0x1f0000>;
       clocks = <&rpmhcc RPMH_CXO_CLK>,
-               <&sleep_clk>, <&pll_test_clk>;
-      clock-names = "bi_tcxo", "sleep_clk", "core_bi_pll_test_se";
+               <&sleep_clk>;
+      clock-names = "bi_tcxo",
+                    "sleep_clk";
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
new file mode 100644
index 000000000000..523e18d7f150
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sdx65.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sdx65.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SDX65
+
+maintainers:
+  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SDX65
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sdx65.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sdx65
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+      - description: PCIE Pipe clock source
+      - description: USB3 phy wrapper pipe clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+      - const: pcie_pipe_clk
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sdx65";
+      reg = <0x100000 0x1f7400>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
+               <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
+                    "pcie_pipe_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml
index 26050da844d5..a5ad0a3da397 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6115.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm6115.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM6115 and SM4250
+title: Qualcomm Global Clock & Reset Controller on SM6115 and SM4250
 
 maintainers:
   - Iskren Chernev <iskren.chernev@gmail.com>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM4250/6115.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM4250/6115.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm6115.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sm6115.h
 
 properties:
   compatible:
@@ -30,32 +29,15 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml
index ab12b391effc..8e37623788bd 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6125.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm6125.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM6125
+title: Qualcomm Global Clock & Reset Controller on SM6125
 
 maintainers:
   - Konrad Dybcio <konrad.dybcio@somainline.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM6125.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM6125.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm6125.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sm6125.h
 
 properties:
   compatible:
@@ -30,32 +29,15 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml
index 20926cd8293e..d1b26ab48eaf 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm6350.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm6350.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM6350
+title: Qualcomm Global Clock & Reset Controller on SM6350
 
 maintainers:
   - Konrad Dybcio <konrad.dybcio@somainline.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM6350.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM6350.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm6350.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sm6350.h
 
 properties:
   compatible:
@@ -32,32 +31,15 @@ properties:
       - const: bi_tcxo_ao
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
index 12766a866625..3ea0ff37a4cb 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm8150.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM8150
+title: Qualcomm Global Clock & Reset Controller on SM8150
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM8150.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8150.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm8150.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8150.h
 
 properties:
   compatible:
@@ -31,32 +30,15 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
index 80bd6caf5bc9..b752542ee20c 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
@@ -4,18 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm8250.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM8250
+title: Qualcomm Global Clock & Reset Controller on SM8250
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM8250.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8250.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm8250.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8250.h
 
 properties:
   compatible:
@@ -31,32 +30,15 @@ properties:
       - const: bi_tcxo
       - const: sleep_clk
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
-  protected-clocks:
-    description:
-      Protected clock specifier list as per common clock binding.
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
index 1122700dcc2b..b4fdde71ef18 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8350.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc-sm8350.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding for SM8350
+title: Qualcomm Global Clock & Reset Controller on SM8350
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains on SM8350.
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8350.
 
-  See also:
-  - dt-bindings/clock/qcom,gcc-sm8350.h
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8350.h
 
 properties:
   compatible:
@@ -24,7 +23,6 @@ properties:
     items:
       - description: Board XO source
       - description: Sleep clock source
-      - description: PLL test clock source (Optional clock)
       - description: PCIE 0 Pipe clock source (Optional clock)
       - description: PCIE 1 Pipe clock source (Optional clock)
       - description: UFS card Rx symbol 0 clock source (Optional clock)
@@ -41,7 +39,6 @@ properties:
     items:
       - const: bi_tcxo
       - const: sleep_clk
-      - const: core_bi_pll_test_se # Optional clock
       - const: pcie_0_pipe_clk # Optional clock
       - const: pcie_1_pipe_clk # Optional clock
       - const: ufs_card_rx_symbol_0_clk # Optional clock
@@ -54,28 +51,15 @@ properties:
       - const: usb3_uni_phy_sec_gcc_usb30_pipe_clk # Optional clock
     minItems: 2
 
-  '#clock-cells':
-    const: 1
-
-  '#reset-cells':
-    const: 1
-
-  '#power-domain-cells':
-    const: 1
-
-  reg:
-    maxItems: 1
-
 required:
   - compatible
   - clocks
   - clock-names
-  - reg
-  - '#clock-cells'
-  - '#reset-cells'
-  - '#power-domain-cells'
 
-additionalProperties: false
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml
new file mode 100644
index 000000000000..9a31981fbeb2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8450.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sm8450.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8450
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8450
+
+  See also:: include/dt-bindings/clock/qcom,gcc-sm8450.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sm8450
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source (Optional clock)
+      - description: PCIE 1 Pipe clock source (Optional clock)
+      - description: PCIE 1 Phy Auxillary clock source (Optional clock)
+      - description: UFS Phy Rx symbol 0 clock source (Optional clock)
+      - description: UFS Phy Rx symbol 1 clock source (Optional clock)
+      - description: UFS Phy Tx symbol 0 clock source (Optional clock)
+      - description: USB3 Phy wrapper pipe clock source (Optional clock)
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: sleep_clk
+      - const: pcie_0_pipe_clk # Optional clock
+      - const: pcie_1_pipe_clk # Optional clock
+      - const: pcie_1_phy_aux_clk # Optional clock
+      - const: ufs_phy_rx_symbol_0_clk # Optional clock
+      - const: ufs_phy_rx_symbol_1_clk # Optional clock
+      - const: ufs_phy_tx_symbol_0_clk # Optional clock
+      - const: usb3_phy_wrapper_gcc_usb30_pipe_clk # Optional clock
+    minItems: 2
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sm8450";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
+      clock-names = "bi_tcxo", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index 2f20f8aa932a..7129fbcf2b6c 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -4,59 +4,17 @@
 $id: http://devicetree.org/schemas/clock/qcom,gcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Global Clock & Reset Controller Binding
+title: Qualcomm Global Clock & Reset Controller Common Properties
 
 maintainers:
   - Stephen Boyd <sboyd@kernel.org>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm global clock control module which supports the clocks, resets and
-  power domains.
-
-  See also:
-  - dt-bindings/clock/qcom,gcc-apq8084.h
-  - dt-bindings/reset/qcom,gcc-apq8084.h
-  - dt-bindings/clock/qcom,gcc-ipq4019.h
-  - dt-bindings/clock/qcom,gcc-ipq6018.h
-  - dt-bindings/reset/qcom,gcc-ipq6018.h
-  - dt-bindings/clock/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
-  - dt-bindings/reset/qcom,gcc-ipq806x.h (qcom,gcc-ipq8064)
-  - dt-bindings/clock/qcom,gcc-msm8939.h
-  - dt-bindings/clock/qcom,gcc-msm8953.h
-  - dt-bindings/reset/qcom,gcc-msm8939.h
-  - dt-bindings/clock/qcom,gcc-msm8660.h
-  - dt-bindings/reset/qcom,gcc-msm8660.h
-  - dt-bindings/clock/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
-  - dt-bindings/reset/qcom,gcc-msm8974.h (qcom,gcc-msm8226 and qcom,gcc-msm8974)
-  - dt-bindings/clock/qcom,gcc-msm8994.h
-  - dt-bindings/clock/qcom,gcc-mdm9607.h
-  - dt-bindings/clock/qcom,gcc-mdm9615.h
-  - dt-bindings/reset/qcom,gcc-mdm9615.h
-  - dt-bindings/clock/qcom,gcc-sdm660.h  (qcom,gcc-sdm630 and qcom,gcc-sdm660)
+  Common bindings for Qualcomm global clock control module providing the
+  clocks, resets and power domains.
 
 properties:
-  compatible:
-    enum:
-      - qcom,gcc-apq8084
-      - qcom,gcc-ipq4019
-      - qcom,gcc-ipq6018
-      - qcom,gcc-ipq8064
-      - qcom,gcc-mdm9607
-      - qcom,gcc-msm8226
-      - qcom,gcc-msm8660
-      - qcom,gcc-msm8916
-      - qcom,gcc-msm8939
-      - qcom,gcc-msm8953
-      - qcom,gcc-msm8960
-      - qcom,gcc-msm8974
-      - qcom,gcc-msm8974pro
-      - qcom,gcc-msm8974pro-ac
-      - qcom,gcc-msm8994
-      - qcom,gcc-mdm9615
-      - qcom,gcc-sdm630
-      - qcom,gcc-sdm660
-
   '#clock-cells':
     const: 1
 
@@ -74,22 +32,11 @@ properties:
       Protected clock specifier list as per common clock binding.
 
 required:
-  - compatible
   - reg
   - '#clock-cells'
   - '#reset-cells'
   - '#power-domain-cells'
 
-additionalProperties: false
+additionalProperties: true
 
-examples:
-  # Example for GCC for MSM8960:
-  - |
-    clock-controller@900000 {
-      compatible = "qcom,gcc-msm8960";
-      reg = <0x900000 0x4000>;
-      #clock-cells = <1>;
-      #reset-cells = <1>;
-      #power-domain-cells = <1>;
-    };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml
index 3f70eb59aae3..0518ea963cdd 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc-sdm660.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/clock/qcom,gpucc-sdm660.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Graphics Clock & Reset Controller Binding for SDM630 and SDM660
+title: Qualcomm Graphics Clock & Reset Controller on SDM630 and SDM660
 
 maintainers:
   - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
 
 description: |
-  Qualcomm graphics clock control module which supports the clocks, resets and
+  Qualcomm graphics clock control module provides the clocks, resets and
   power domains on SDM630 and SDM660.
 
   See also dt-bindings/clock/qcom,gpucc-sdm660.h.
diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
index 46dff46d5760..1e3dc9deded9 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc.yaml
@@ -4,31 +4,39 @@
 $id: http://devicetree.org/schemas/clock/qcom,gpucc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Graphics Clock & Reset Controller Binding
+title: Qualcomm Graphics Clock & Reset Controller
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm graphics clock control module which supports the clocks, resets and
-  power domains on Qualcomm SoCs.
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
 
-  See also:
-    dt-bindings/clock/qcom,gpucc-sdm845.h
-    dt-bindings/clock/qcom,gpucc-sc7180.h
-    dt-bindings/clock/qcom,gpucc-sc7280.h
-    dt-bindings/clock/qcom,gpucc-sm8150.h
-    dt-bindings/clock/qcom,gpucc-sm8250.h
+  See also::
+    include/dt-bindings/clock/qcom,gpucc-sdm845.h
+    include/dt-bindings/clock/qcom,gpucc-sa8775p.h
+    include/dt-bindings/clock/qcom,gpucc-sc7180.h
+    include/dt-bindings/clock/qcom,gpucc-sc7280.h
+    include/dt-bindings/clock/qcom,gpucc-sc8280xp.h
+    include/dt-bindings/clock/qcom,gpucc-sm6350.h
+    include/dt-bindings/clock/qcom,gpucc-sm8150.h
+    include/dt-bindings/clock/qcom,gpucc-sm8250.h
+    include/dt-bindings/clock/qcom,gpucc-sm8350.h
 
 properties:
   compatible:
     enum:
       - qcom,sdm845-gpucc
+      - qcom,sa8775p-gpucc
       - qcom,sc7180-gpucc
       - qcom,sc7280-gpucc
       - qcom,sc8180x-gpucc
+      - qcom,sc8280xp-gpucc
+      - qcom,sm6350-gpucc
       - qcom,sm8150-gpucc
       - qcom,sm8250-gpucc
+      - qcom,sm8350-gpucc
 
   clocks:
     items:
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
new file mode 100644
index 000000000000..718fe0625424
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq5332-gcc.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq5332-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ5332
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ5332.
+
+  See also:: include/dt-bindings/clock/qcom,gcc-ipq5332.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,ipq5332-gcc
+
+  clocks:
+    items:
+      - description: Board XO clock source
+      - description: Sleep clock source
+      - description: PCIE 2lane PHY pipe clock source
+      - description: PCIE 2lane x1 PHY pipe clock source (For second lane)
+      - description: USB PCIE wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,ipq5332-gcc";
+      reg = <0x01800000 0x80000>;
+      clocks = <&xo_board>,
+               <&sleep_clk>,
+               <&pcie_2lane_phy_pipe_clk>,
+               <&pcie_2lane_phy_pipe_clk_x1>,
+               <&usb_pcie_wrapper_pipe_clk>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
new file mode 100644
index 000000000000..afc68eb9d7cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-gcc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,ipq9574-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on IPQ9574
+
+maintainers:
+  - Anusha Rao <quic_anusha@quicinc.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on IPQ9574
+
+  See also::
+    include/dt-bindings/clock/qcom,ipq9574-gcc.h
+    include/dt-bindings/reset/qcom,ipq9574-gcc.h
+
+properties:
+  compatible:
+    const: qcom,ipq9574-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: Bias PLL ubi clock source
+      - description: PCIE30 PHY0 pipe clock source
+      - description: PCIE30 PHY1 pipe clock source
+      - description: PCIE30 PHY2 pipe clock source
+      - description: PCIE30 PHY3 pipe clock source
+      - description: USB3 PHY pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@1800000 {
+      compatible = "qcom,ipq9574-gcc";
+      reg = <0x01800000 0x80000>;
+      clocks = <&xo_board_clk>,
+               <&sleep_clk>,
+               <&bias_pll_ubi_nc_clk>,
+               <&pcie30_phy0_pipe_clk>,
+               <&pcie30_phy1_pipe_clk>,
+               <&pcie30_phy2_pipe_clk>,
+               <&pcie30_phy3_pipe_clk>,
+               <&usb3phy_0_cc_pipe_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml b/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml
new file mode 100644
index 000000000000..a466e4e8aacd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,kpss-acc-v1.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,kpss-acc-v1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Krait Processor Sub-system (KPSS) Application Clock Controller (ACC) v1
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  The KPSS ACC provides clock, power domain, and reset control to a Krait CPU.
+  There is one ACC register region per CPU within the KPSS remapped region as
+  well as an alias register region that remaps accesses to the ACC associated
+  with the CPU accessing the region. ACC v1 is currently used as a
+  clock-controller for enabling the cpu and hanling the aux clocks.
+
+properties:
+  compatible:
+    const: qcom,kpss-acc-v1
+
+  reg:
+    items:
+      - description: Base address and size of the register region
+      - description: Optional base address and size of the alias register region
+    minItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pll8_vote
+      - const: pxo
+
+  clock-output-names:
+    description: Name of the aux clock. Krait can have at most 4 cpu.
+    enum:
+      - acpu0_aux
+      - acpu1_aux
+      - acpu2_aux
+      - acpu3_aux
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-output-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+    clock-controller@2088000 {
+      compatible = "qcom,kpss-acc-v1";
+      reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+      clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+      clock-names = "pll8_vote", "pxo";
+      clock-output-names = "acpu0_aux";
+      #clock-cells = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,kpss-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,kpss-gcc.yaml
new file mode 100644
index 000000000000..88b7672123a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,kpss-gcc.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,kpss-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Krait Processor Sub-system (KPSS) Global Clock Controller (GCC)
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  Krait Processor Sub-system (KPSS) Global Clock Controller (GCC). Used
+  to control L2 mux (in the current implementation) and provide access
+  to the kpss-gcc registers.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,kpss-gcc-ipq8064
+          - qcom,kpss-gcc-apq8064
+          - qcom,kpss-gcc-msm8974
+          - qcom,kpss-gcc-msm8960
+          - qcom,kpss-gcc-msm8660
+          - qcom,kpss-gcc-mdm9615
+      - const: qcom,kpss-gcc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pll8_vote
+      - const: pxo
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,kpss-gcc-ipq8064
+          - qcom,kpss-gcc-apq8064
+          - qcom,kpss-gcc-msm8974
+          - qcom,kpss-gcc-msm8960
+then:
+  required:
+    - clocks
+    - clock-names
+    - '#clock-cells'
+else:
+  properties:
+    clock: false
+    clock-names: false
+    '#clock-cells': false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+    clock-controller@2011000 {
+      compatible = "qcom,kpss-gcc-ipq8064", "qcom,kpss-gcc", "syscon";
+      reg = <0x2011000 0x1000>;
+      clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+      clock-names = "pll8_vote", "pxo";
+      #clock-cells = <0>;
+    };
+
+  - |
+    clock-controller@2011000 {
+      compatible = "qcom,kpss-gcc-mdm9615", "qcom,kpss-gcc", "syscon";
+      reg = <0x02011000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,lcc.txt b/Documentation/devicetree/bindings/clock/qcom,lcc.txt
deleted file mode 100644
index a3c78aa88038..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,lcc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Qualcomm LPASS Clock & Reset Controller Binding
-------------------------------------------------
-
-Required properties :
-- compatible : shall contain only one of the following:
-
-			"qcom,lcc-msm8960"
-			"qcom,lcc-apq8064"
-			"qcom,lcc-ipq8064"
-			"qcom,lcc-mdm9615"
-
-- reg : shall contain base register location and length
-- #clock-cells : shall contain 1
-- #reset-cells : shall contain 1
-
-Example:
-	clock-controller@28000000 {
-		compatible = "qcom,lcc-ipq8064";
-		reg = <0x28000000 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,lcc.yaml b/Documentation/devicetree/bindings/clock/qcom,lcc.yaml
new file mode 100644
index 000000000000..8c783823e93c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,lcc.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,lcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Clock & Reset Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,lcc-apq8064
+      - qcom,lcc-ipq8064
+      - qcom,lcc-mdm9615
+      - qcom,lcc-msm8960
+
+  clocks:
+    maxItems: 8
+
+  clock-names:
+    maxItems: 8
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,lcc-apq8064
+              - qcom,lcc-msm8960
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board PXO source
+            - description: PLL 4 Vote clock
+            - description: MI2S codec clock
+            - description: Mic I2S codec clock
+            - description: Mic I2S spare clock
+            - description: Speaker I2S codec clock
+            - description: Speaker I2S spare clock
+            - description: PCM codec clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: pll4_vote
+            - const: mi2s_codec_clk
+            - const: codec_i2s_mic_codec_clk
+            - const: spare_i2s_mic_codec_clk
+            - const: codec_i2s_spkr_codec_clk
+            - const: spare_i2s_spkr_codec_clk
+            - const: pcm_codec_clk
+
+      required:
+        - clocks
+        - clock-names
+
+examples:
+  - |
+    clock-controller@28000000 {
+        compatible = "qcom,lcc-ipq8064";
+        reg = <0x28000000 0x1000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt b/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt
deleted file mode 100644
index b9e9787045b9..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,lpasscc.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Qualcomm LPASS Clock Controller Binding
------------------------------------------------
-
-Required properties :
-- compatible		: shall contain "qcom,sdm845-lpasscc"
-- #clock-cells		: from common clock binding, shall contain 1.
-- reg			: shall contain base register address and size,
-			  in the order
-			Index-0 maps to LPASS_CC register region
-			Index-1 maps to LPASS_QDSP6SS register region
-
-Optional properties :
-- reg-names	: register names of LPASS domain
-		 "cc", "qdsp6ss".
-
-Example:
-
-The below node has to be defined in the cases where the LPASS peripheral loader
-would bring the subsystem out of reset.
-
-	lpasscc: clock-controller@17014000 {
-		compatible = "qcom,sdm845-lpasscc";
-		reg = <0x17014000 0x1f004>, <0x17300000 0x200>;
-		reg-names = "cc", "qdsp6ss";
-		#clock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
index 68fdc3d4982a..acf0c923c24f 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/clock/qcom,mmcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Multimedia Clock & Reset Controller Binding
+title: Qualcomm Multimedia Clock & Reset Controller
 
 maintainers:
-  - Jeffrey Hugo <jhugo@codeaurora.org>
+  - Jeffrey Hugo <quic_jhugo@quicinc.com>
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm multimedia clock control module which supports the clocks, resets and
+  Qualcomm multimedia clock control module provides the clocks, resets and
   power domains.
 
 properties:
@@ -19,6 +19,7 @@ properties:
     enum:
       - qcom,mmcc-apq8064
       - qcom,mmcc-apq8084
+      - qcom,mmcc-msm8226
       - qcom,mmcc-msm8660
       - qcom,mmcc-msm8960
       - qcom,mmcc-msm8974
@@ -30,30 +31,12 @@ properties:
       - qcom,mmcc-sdm660
 
   clocks:
-    items:
-      - description: Board XO source
-      - description: Board sleep source
-      - description: Global PLL 0 clock
-      - description: DSI phy instance 0 dsi clock
-      - description: DSI phy instance 0 byte clock
-      - description: DSI phy instance 1 dsi clock
-      - description: DSI phy instance 1 byte clock
-      - description: HDMI phy PLL clock
-      - description: DisplayPort phy PLL vco clock
-      - description: DisplayPort phy PLL link clock
+    minItems: 8
+    maxItems: 13
 
   clock-names:
-    items:
-      - const: xo
-      - const: sleep
-      - const: gpll0
-      - const: dsi0dsi
-      - const: dsi0byte
-      - const: dsi1dsi
-      - const: dsi1byte
-      - const: hdmipll
-      - const: dpvco
-      - const: dplink
+    minItems: 8
+    maxItems: 13
 
   '#clock-cells':
     const: 1
@@ -84,16 +67,255 @@ required:
 
 additionalProperties: false
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: qcom,mmcc-msm8998
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-apq8064
+              - qcom,mmcc-msm8960
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board PXO source
+            - description: PLL 3 clock
+            - description: PLL 3 Vote clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: DSI phy instance 2 dsi clock
+            - description: DSI phy instance 2 byte clock
+            - description: HDMI phy PLL clock
 
-then:
-  required:
-    - clocks
-    - clock-names
+        clock-names:
+          items:
+            - const: pxo
+            - const: pll3
+            - const: pll8_vote
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: dsi2pll
+            - const: dsi2pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8974
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: MMSS GPLL0 voted clock
+            - description: GPLL0 voted clock
+            - description: GPLL1 voted clock
+            - description: GFX3D clock source
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: eDP phy PLL link clock
+            - description: eDP phy PLL vco clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: mmss_gpll0_vote
+            - const: gpll0_vote
+            - const: gpll1_vote
+            - const: gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+            - const: edp_link_clk
+            - const: edp_vco_div
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-apq8084
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board sleep source
+            - description: MMSS GPLL0 voted clock
+            - description: GPLL0 clock
+            - description: GPLL0 voted clock
+            - description: GPLL1 clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: eDP phy PLL link clock
+            - description: eDP phy PLL vco clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: sleep_clk
+            - const: mmss_gpll0_vote
+            - const: gpll0
+            - const: gpll0_vote
+            - const: gpll1
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+            - const: edp_link_clk
+            - const: edp_vco_div
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-msm8994
+              - qcom,mmcc-msm8998
+              - qcom,mmcc-sdm630
+              - qcom,mmcc-sdm660
+    then:
+      required:
+        - clocks
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8994
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: MMSS NoC AHB clock
+            - description: GFX3D clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: mmssnoc_ahb
+            - const: oxili_gfx3d_clk_src
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8996
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: MMSS NoC AHB clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: gcc_mmss_noc_cfg_ahb_clk
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: hdmipll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,mmcc-msm8998
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Global PLL 0 clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: HDMI phy PLL clock
+            - description: DisplayPort phy PLL link clock
+            - description: DisplayPort phy PLL vco clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: gpll0
+            - const: dsi0dsi
+            - const: dsi0byte
+            - const: dsi1dsi
+            - const: dsi1byte
+            - const: hdmipll
+            - const: dplink
+            - const: dpvco
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,mmcc-sdm630
+              - qcom,mmcc-sdm660
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board sleep source
+            - description: Global PLL 0 clock
+            - description: Global PLL 0 DIV clock
+            - description: DSI phy instance 0 dsi clock
+            - description: DSI phy instance 0 byte clock
+            - description: DSI phy instance 1 dsi clock
+            - description: DSI phy instance 1 byte clock
+            - description: DisplayPort phy PLL link clock
+            - description: DisplayPort phy PLL vco clock
+
+        clock-names:
+          items:
+            - const: xo
+            - const: sleep_clk
+            - const: gpll0
+            - const: gpll0_div
+            - const: dsi0pll
+            - const: dsi0pllbyte
+            - const: dsi1pll
+            - const: dsi1pllbyte
+            - const: dp_link_2x_clk_divsel_five
+            - const: dp_vco_divided_clk_src_mux
 
 examples:
   # Example for MMCC for MSM8960:
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
index a20cb10636dd..fcace96c72eb 100644
--- a/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-apcc.yaml
@@ -26,22 +26,20 @@ properties:
 
   clocks:
     items:
-      - description: Primary PLL clock for power cluster (little)
-      - description: Primary PLL clock for perf cluster (big)
-      - description: Alternate PLL clock for power cluster (little)
-      - description: Alternate PLL clock for perf cluster (big)
+      - description: XO source
+      - description: SYS APCS AUX clock
 
   clock-names:
     items:
-      - const: pwrcl_pll
-      - const: perfcl_pll
-      - const: pwrcl_alt_pll
-      - const: perfcl_alt_pll
+      - const: xo
+      - const: sys_apcs_aux
 
 required:
   - compatible
   - reg
   - '#clock-cells'
+  - clocks
+  - clock-names
 
 additionalProperties: false
 
@@ -51,4 +49,7 @@ examples:
         compatible = "qcom,msm8996-apcc";
         reg = <0x6400000 0x90000>;
         #clock-cells = <1>;
+
+        clocks = <&xo_board>, <&apcs_glb>;
+        clock-names = "xo", "sys_apcs_aux";
     };
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml
new file mode 100644
index 000000000000..3ffe69d8cdd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8996-cbf.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,msm8996-cbf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8996 Core Bus Fabric (CBF) clock controller
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description: >
+  The clock controller for the Qualcomm MSM8996 CBF clock, which drives the
+  interconnect between two CPU clusters.
+
+properties:
+  compatible:
+    const: qcom,msm8996-cbf
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO source
+      - description: SYS APCS AUX clock
+
+  '#clock-cells':
+    const: 0
+
+  '#interconnect-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#interconnect-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@9a11000 {
+        compatible = "qcom,msm8996-cbf";
+        reg = <0x09a11000 0x10000>;
+        clocks = <&rpmcc RPM_SMD_BB_CLK1>, <&apcs_glb>;
+        #clock-cells = <0>;
+        #interconnect-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
index d747bb58f0a7..2d8897991663 100644
--- a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,msm8998-gpucc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Graphics Clock & Reset Controller Binding for MSM8998
+title: Qualcomm Graphics Clock & Reset Controller on MSM8998
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm graphics clock control module which supports the clocks, resets and
-  power domains on MSM8998.
+  Qualcomm graphics clock control module provides the clocks, resets and power
+  domains on MSM8998.
 
-  See also dt-bindings/clock/qcom,gpucc-msm8998.h.
+  See also:: include/dt-bindings/clock/qcom,gpucc-msm8998.h
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
index bbaaf1e2a203..03fa30fe9253 100644
--- a/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 properties:
   compatible:
-    const: "qcom,qcs404-q6sstopcc"
+    const: qcom,qcs404-q6sstopcc
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml
new file mode 100644
index 000000000000..4a00f2d41684
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qcm2290-dispcc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qcm2290-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on QCM2290
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on qcm2290.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-qcm2290.h
+
+properties:
+  compatible:
+    const: qcom,qcm2290-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board active-only XO source
+      - description: GPLL0 source from GCC
+      - description: GPLL0 div source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: gcc_disp_gpll0_clk_src
+      - const: gcc_disp_gpll0_div_clk_src
+      - const: dsi0_phy_pll_out_byteclk
+      - const: dsi0_phy_pll_out_dsiclk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@5f00000 {
+            compatible = "qcom,qcm2290-dispcc";
+            reg = <0x5f00000 0x20000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+                     <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+                     <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+                     <&dsi0_phy 0>,
+                     <&dsi0_phy 1>;
+            clock-names = "bi_tcxo",
+                          "bi_tcxo_ao",
+                          "gcc_disp_gpll0_clk_src",
+                          "gcc_disp_gpll0_div_clk_src",
+                          "dsi0_phy_pll_out_byteclk",
+                          "dsi0_phy_pll_out_dsiclk";
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml
new file mode 100644
index 000000000000..767a9d03aa32
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qdu1000-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller for QDU1000 and QRU1000
+
+maintainers:
+  - Melody Olvera <quic_molvera@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on QDU1000 and QRU1000
+
+  See also:: include/dt-bindings/clock/qcom,qdu1000-gcc.h
+
+properties:
+  compatible:
+    const: qcom,qdu1000-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: PCIE 0 Phy Auxiliary clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,qdu1000-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>,
+               <&pcie_0_pipe_clk>, <&pcie_0_phy_aux_clk>,
+               <&usb3_phy_wrapper_pipe_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
deleted file mode 100644
index a4877881f1d8..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-Qualcomm RPM Clock Controller Binding
-------------------------------------------------
-The RPM is a dedicated hardware engine for managing the shared
-SoC resources in order to keep the lowest power profile. It
-communicates with other hardware subsystems via shared memory
-and accepts clock requests, aggregates the requests and turns
-the clocks on/off or scales them on demand.
-
-Required properties :
-- compatible : shall contain only one of the following. The generic
-               compatible "qcom,rpmcc" should be also included.
-
-			"qcom,rpmcc-mdm9607", "qcom,rpmcc"
-			"qcom,rpmcc-msm8660", "qcom,rpmcc"
-			"qcom,rpmcc-apq8060", "qcom,rpmcc"
-			"qcom,rpmcc-msm8226", "qcom,rpmcc"
-			"qcom,rpmcc-msm8916", "qcom,rpmcc"
-			"qcom,rpmcc-msm8936", "qcom,rpmcc"
-			"qcom,rpmcc-msm8953", "qcom,rpmcc"
-			"qcom,rpmcc-msm8974", "qcom,rpmcc"
-			"qcom,rpmcc-msm8976", "qcom,rpmcc"
-			"qcom,rpmcc-apq8064", "qcom,rpmcc"
-			"qcom,rpmcc-ipq806x", "qcom,rpmcc"
-			"qcom,rpmcc-msm8992",·"qcom,rpmcc"
-			"qcom,rpmcc-msm8994",·"qcom,rpmcc"
-			"qcom,rpmcc-msm8996", "qcom,rpmcc"
-			"qcom,rpmcc-msm8998", "qcom,rpmcc"
-			"qcom,rpmcc-qcs404", "qcom,rpmcc"
-			"qcom,rpmcc-sdm660", "qcom,rpmcc"
-			"qcom,rpmcc-sm6115", "qcom,rpmcc"
-			"qcom,rpmcc-sm6125", "qcom,rpmcc"
-
-- #clock-cells : shall contain 1
-
-The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h>
-and come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock
-is an "active" clock, which means that the consumer only care that the
-clock is available when the apps CPU subsystem is active, i.e. not
-suspended or in deep idle. If it is important that the clock keeps running
-during system suspend, you need to specify the non-active clock, the one
-not containing *_A_* in the enumerator name.
-
-Example:
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <0 168 1>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests {
-				compatible = "qcom,rpm-msm8916";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
-					#clock-cells = <1>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
new file mode 100644
index 000000000000..3665dd30604a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,rpmcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM Clock Controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> and
+  come in pairs:: FOO_CLK followed by FOO_A_CLK. The latter clock is
+  an "active" clock, which means that the consumer only care that the clock is
+  available when the apps CPU subsystem is active, i.e. not suspended or in
+  deep idle. If it is important that the clock keeps running during system
+  suspend, you need to specify the non-active clock, the one not containing
+  *_A_* in the enumerator name.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,rpmcc-apq8060
+          - qcom,rpmcc-apq8064
+          - qcom,rpmcc-ipq806x
+          - qcom,rpmcc-mdm9607
+          - qcom,rpmcc-msm8226
+          - qcom,rpmcc-msm8660
+          - qcom,rpmcc-msm8909
+          - qcom,rpmcc-msm8916
+          - qcom,rpmcc-msm8917
+          - qcom,rpmcc-msm8936
+          - qcom,rpmcc-msm8953
+          - qcom,rpmcc-msm8974
+          - qcom,rpmcc-msm8976
+          - qcom,rpmcc-msm8992
+          - qcom,rpmcc-msm8994
+          - qcom,rpmcc-msm8996
+          - qcom,rpmcc-msm8998
+          - qcom,rpmcc-qcm2290
+          - qcom,rpmcc-qcs404
+          - qcom,rpmcc-sdm660
+          - qcom,rpmcc-sm6115
+          - qcom,rpmcc-sm6125
+          - qcom,rpmcc-sm6375
+      - const: qcom,rpmcc
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - '#clock-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,rpmcc-apq8060
+              - qcom,rpmcc-ipq806x
+              - qcom,rpmcc-msm8660
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pxo clock
+
+        clock-names:
+          items:
+            - const: pxo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,rpmcc-apq8064
+    then:
+      properties:
+        clocks:
+          items:
+            - description: pxo clock
+            - description: cxo clock
+
+        clock-names:
+          items:
+            - const: pxo
+            - const: cxo
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,rpmcc-mdm9607
+              - qcom,rpmcc-msm8226
+              - qcom,rpmcc-msm8916
+              - qcom,rpmcc-msm8917
+              - qcom,rpmcc-msm8936
+              - qcom,rpmcc-msm8953
+              - qcom,rpmcc-msm8974
+              - qcom,rpmcc-msm8976
+              - qcom,rpmcc-msm8992
+              - qcom,rpmcc-msm8994
+              - qcom,rpmcc-msm8996
+              - qcom,rpmcc-msm8998
+              - qcom,rpmcc-qcm2290
+              - qcom,rpmcc-qcs404
+              - qcom,rpmcc-sdm660
+              - qcom,rpmcc-sm6115
+              - qcom,rpmcc-sm6125
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: xo clock
+
+        clock-names:
+          items:
+            - const: xo
+
+additionalProperties: false
+
+examples:
+  - |
+    rpm {
+        rpm-requests {
+            compatible = "qcom,rpm-msm8916";
+            qcom,smd-channels = "rpm_requests";
+
+            clock-controller {
+                compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+                #clock-cells = <1>;
+            };
+        };
+    };
+
+  - |
+    rpm {
+        clock-controller {
+            compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+            #clock-cells = <1>;
+            clocks = <&pxo_board>;
+            clock-names = "pxo";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
index 72212970e6f5..d5a250b7c2af 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/qcom,rpmhcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies, Inc. RPMh Clocks Bindings
+title: Qualcomm Technologies, Inc. RPMh Clocks
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
@@ -17,15 +17,22 @@ description: |
 properties:
   compatible:
     enum:
+      - qcom,qdu1000-rpmh-clk
+      - qcom,sa8775p-rpmh-clk
       - qcom,sc7180-rpmh-clk
       - qcom,sc7280-rpmh-clk
       - qcom,sc8180x-rpmh-clk
+      - qcom,sc8280xp-rpmh-clk
+      - qcom,sdm670-rpmh-clk
       - qcom,sdm845-rpmh-clk
       - qcom,sdx55-rpmh-clk
+      - qcom,sdx65-rpmh-clk
       - qcom,sm6350-rpmh-clk
       - qcom,sm8150-rpmh-clk
       - qcom,sm8250-rpmh-clk
       - qcom,sm8350-rpmh-clk
+      - qcom,sm8450-rpmh-clk
+      - qcom,sm8550-rpmh-clk
 
   clocks:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml
new file mode 100644
index 000000000000..0f641c235b13
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sa8775p-gcc.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sa8775p-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on sa8775p
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and
+  power domains on sa8775p.
+
+  See also:: include/dt-bindings/clock/qcom,sa8775p-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sa8775p-gcc
+
+  clocks:
+    items:
+      - description: XO reference clock
+      - description: Sleep clock
+      - description: UFS memory first RX symbol clock
+      - description: UFS memory second RX symbol clock
+      - description: UFS memory first TX symbol clock
+      - description: UFS card first RX symbol clock
+      - description: UFS card second RX symbol clock
+      - description: UFS card first TX symbol clock
+      - description: Primary USB3 PHY wrapper pipe clock
+      - description: Secondary USB3 PHY wrapper pipe clock
+      - description: PCIe 0 pipe clock
+      - description: PCIe 1 pipe clock
+      - description: PCIe PHY clock
+      - description: First EMAC controller reference clock
+      - description: Second EMAC controller reference clock
+
+  protected-clocks:
+    maxItems: 240
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    gcc: clock-controller@100000 {
+        compatible = "qcom,sa8775p-gcc";
+        reg = <0x100000 0xc7018>;
+        clocks = <&rpmhcc RPMH_CXO_CLK>,
+                 <&sleep_clk>,
+                 <&ufs_phy_rx_symbol_0_clk>,
+                 <&ufs_phy_rx_symbol_1_clk>,
+                 <&ufs_phy_tx_symbol_0_clk>,
+                 <&ufs_card_rx_symbol_0_clk>,
+                 <&ufs_card_rx_symbol_1_clk>,
+                 <&ufs_card_tx_symbol_0_clk>,
+                 <&usb_0_ssphy>,
+                 <&usb_1_ssphy>,
+                 <&pcie_0_pipe_clk>,
+                 <&pcie_1_pipe_clk>,
+                 <&pcie_phy_pipe_clk>,
+                 <&rxc0_ref_clk>,
+                 <&rxc1_ref_clk>;
+        power-domains = <&rpmhpd SA8775P_CX>;
+
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
index f49027edfc44..098c8acf4bad 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7180-camcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Camera Clock & Reset Controller Binding for SC7180
+title: Qualcomm Camera Clock & Reset Controller on SC7180
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm camera clock control module which supports the clocks, resets and
-  power domains on SC7180.
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SC7180.
 
-  See also:
-  - dt-bindings/clock/qcom,camcc-sc7180.h
+  See also:: include/dt-bindings/clock/qcom,camcc-sc7180.h
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
index e94847f92770..95ad16d0abc3 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7180-dispcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SC7180
+title: Qualcomm Display Clock & Reset Controller on SC7180
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SC7180.
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SC7180.
 
-  See also dt-bindings/clock/qcom,dispcc-sc7180.h.
+  See also:: include/dt-bindings/clock/qcom,dispcc-sc7180.h
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
index c54172fbf29f..f297694ef8b8 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-lpasscorecc.yaml
@@ -4,17 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7180-lpasscorecc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm LPASS Core Clock Controller Binding for SC7180
+title: Qualcomm LPASS Core Clock Controller on SC7180
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm LPASS core clock control module which supports the clocks and
-  power domains on SC7180.
+  Qualcomm LPASS core clock control module provides the clocks and power
+  domains on SC7180.
 
-  See also:
-  - dt-bindings/clock/qcom,lpasscorecc-sc7180.h
+  See also:: include/dt-bindings/clock/qcom,lpasscorecc-sc7180.h
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
index 970030986a86..1e856a8a996e 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml
@@ -4,16 +4,15 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7180-mss.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Modem Clock Controller Binding for SC7180
+title: Qualcomm Modem Clock Controller on SC7180
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm modem clock control module which supports the clocks on SC7180.
+  Qualcomm modem clock control module provides the clocks on SC7180.
 
-  See also:
-  - dt-bindings/clock/qcom,mss-sc7180.h
+  See also:: include/dt-bindings/clock/qcom,mss-sc7180.h
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml
new file mode 100644
index 000000000000..b60adbad4590
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SC7280
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and
+  power domains on SC7280.
+
+  See also:: include/dt-bindings/clock/qcom,camcc-sc7280.h
+
+properties:
+  compatible:
+    const: qcom,sc7280-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO active source
+      - description: Sleep clock source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+      - const: bi_tcxo_ao
+      - const: sleep_clk
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sc7280-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml
index 2178666fb697..cfe6594a0a6b 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-dispcc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sc7280-dispcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SC7280
+title: Qualcomm Display Clock & Reset Controller on SC7280
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SC7280.
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SC7280.
 
-  See also dt-bindings/clock/qcom,dispcc-sc7280.h.
+  See also:: include/dt-bindings/clock/qcom,dispcc-sc7280.h
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
new file mode 100644
index 000000000000..97c6bd96e0cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core Clock Controller on SC7280
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm LPASS core clock control module provides the clocks and power
+  domains on SC7280.
+
+  See also:: include/dt-bindings/clock/qcom,lpass-sc7280.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-lpasscc
+
+  clocks:
+    items:
+      - description: gcc_cfg_noc_lpass_clk from GCC
+
+  clock-names:
+    items:
+      - const: iface
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    items:
+      - description: LPASS qdsp6ss register
+      - description: LPASS top-cc register
+
+  reg-names:
+    items:
+      - const: qdsp6ss
+      - const: top_cc
+
+  qcom,adsp-pil-mode:
+    description:
+      Indicates if the LPASS would be brought out of reset using
+      remoteproc peripheral loader.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpass-sc7280.h>
+    clock-controller@3000000 {
+      compatible = "qcom,sc7280-lpasscc";
+      reg = <0x03000000 0x40>, <0x03c04000 0x4>;
+      reg-names = "qdsp6ss", "top_cc";
+      clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>;
+      clock-names = "iface";
+      qcom,adsp-pil-mode;
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
new file mode 100644
index 000000000000..447cdc447a0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-lpasscorecc.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7280-lpasscorecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm LPASS Core & Audio Clock Controller on SC7280
+
+maintainers:
+  - Taniya Das <tdas@codeaurora.org>
+
+description: |
+  Qualcomm LPASS core and audio clock control module provides the clocks and
+  power domains on SC7280.
+
+  See also::
+    include/dt-bindings/clock/qcom,lpasscorecc-sc7280.h
+    include/dt-bindings/clock/qcom,lpassaudiocc-sc7280.h
+
+properties:
+  clocks: true
+
+  clock-names: true
+
+  reg: true
+
+  compatible:
+    enum:
+      - qcom,sc7280-lpassaoncc
+      - qcom,sc7280-lpassaudiocc
+      - qcom,sc7280-lpasscorecc
+      - qcom,sc7280-lpasshm
+
+  power-domains:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  qcom,adsp-pil-mode:
+    description:
+      Indicates if the LPASS would be brought out of reset using
+      peripheral loader.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7280-lpassaudiocc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: lpass_aon_cc_main_rcg_clk_src
+
+        reg:
+          items:
+            - description: lpass core cc register
+            - description: lpass audio csr register
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-lpassaoncc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board XO active only source
+            - description: LPASS_AON_CC_MAIN_RCG_CLK_SRC
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+            - const: iface
+
+        reg:
+          maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-lpasshm
+              - qcom,sc7280-lpasscorecc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+
+        clock-names:
+          items:
+            - const: bi_tcxo
+
+        reg:
+          maxItems: 1
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_audiocc: clock-controller@3300000 {
+      compatible = "qcom,sc7280-lpassaudiocc";
+      reg = <0x3300000 0x30000>,
+            <0x32a9000 0x1000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>;
+      clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src";
+      power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_hm: clock-controller@3c00000 {
+      compatible = "qcom,sc7280-lpasshm";
+      reg = <0x3c00000 0x28>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpasscore: clock-controller@3900000 {
+      compatible = "qcom,sc7280-lpasscorecc";
+      reg = <0x3900000 0x50000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
+    #include <dt-bindings/clock/qcom,lpasscorecc-sc7280.h>
+    lpass_aon: clock-controller@3380000 {
+      compatible = "qcom,sc7280-lpassaoncc";
+      reg = <0x3380000 0x30000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>,
+               <&lpasscore LPASS_CORE_CC_CORE_CLK>;
+      clock-names = "bi_tcxo", "bi_tcxo_ao","iface";
+      qcom,adsp-pil-mode;
+      #clock-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
new file mode 100644
index 000000000000..91d1f7918037
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SDM845
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SDM845.
+
+  See also:: include/dt-bindings/clock/qcom,camcc-sm845.h
+
+properties:
+  compatible:
+    const: qcom,sdm845-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: bi_tcxo
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sdm845-camcc";
+      reg = <0x0ad00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "bi_tcxo";
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
index 4a3be733d042..76b53ce64e40 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/clock/qcom,sdm845-dispcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SDM845
+title: Qualcomm Display Clock & Reset Controller on SDM845
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SDM845.
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SDM845.
 
-  See also dt-bindings/clock/qcom,dispcc-sdm845.h.
+  See also:: include/dt-bindings/clock/qcom,dispcc-sdm845.h
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-lpasscc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-lpasscc.yaml
new file mode 100644
index 000000000000..a96fd837c70a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-lpasscc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sdm845-lpasscc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 LPASS Clock Controller
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm SDM845 LPASS (Low Power Audio SubSystem) Clock Controller.
+
+  See also:: include/dt-bindings/clock/qcom,lpass-sdm845.h
+
+properties:
+  compatible:
+    const: qcom,sdm845-lpasscc
+
+  '#clock-cells':
+    const: 1
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: cc
+      - const: qdsp6ss
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@17014000 {
+        compatible = "qcom,sdm845-lpasscc";
+        reg = <0x17014000 0x1f004>, <0x17300000 0x200>;
+        reg-names = "cc", "qdsp6ss";
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
new file mode 100644
index 000000000000..f802a2e7f818
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-dispcc.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6115-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock Controller for SM6115
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks and power domains
+  on SM6115.
+
+  See also:: include/dt-bindings/clock/qcom,sm6115-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: GPLL0 DISP DIV clock from GCC
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6115-dispcc";
+      reg = <0x5f00000 0x20000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6115-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6115-gpucc.yaml
new file mode 100644
index 000000000000..cf19f44af774
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6115-gpucc.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6115-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM6115
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module provides clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also:: include/dt-bindings/clock/qcom,sm6115-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6115-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 main div source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        clock-controller@5990000 {
+            compatible = "qcom,sm6115-gpucc";
+            reg = <0x05990000 0x9000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6125-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6125-gpucc.yaml
new file mode 100644
index 000000000000..374a1844a159
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6125-gpucc.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6125-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM6125
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module provides clocks and power domains on
+  Qualcomm SoCs.
+
+  See also:: include/dt-bindings/clock/qcom,sm6125-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6125-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+
+  '#clock-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm6125.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        clock-controller@5990000 {
+            compatible = "qcom,sm6125-gpucc";
+            reg = <0x05990000 0x9000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>;
+            #clock-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml
new file mode 100644
index 000000000000..fd6658cb793d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6350-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM6350
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and  power
+  domains on SM6350.
+
+  See also:: include/dt-bindings/clock/qcom,sm6350-camcc.h
+
+properties:
+  compatible:
+    const: qcom,sm6350-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sm6350-camcc";
+      reg = <0x0ad00000 0x16000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-dispcc.yaml
new file mode 100644
index 000000000000..183b1c75dbdf
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-dispcc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller on SM6375
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM6375.
+
+  See also:: include/dt-bindings/clock/qcom,dispcc-sm6375.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 source from GCC
+      - description: Byte clock from DSI PHY
+      - description: Pixel clock from DSI PHY
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    clock-controller@5f00000 {
+      compatible = "qcom,sm6375-dispcc";
+      reg = <0x05f00000 0x20000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+               <&dsi_phy 0>,
+               <&dsi_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml
new file mode 100644
index 000000000000..295d4bb1a966
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gcc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM6375
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM6375
+
+  See also:: include/dt-bindings/clock/qcom,sm6375-gcc.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6375-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO Active-Only source
+      - description: Sleep clock source
+
+required:
+  - compatible
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    clock-controller@1400000 {
+      compatible = "qcom,sm6375-gcc";
+      reg = <0x01400000 0x1f0000>;
+      clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+               <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
+               <&sleep_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml
new file mode 100644
index 000000000000..b480ead5bd69
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm6375-gpucc.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6375-gpucc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller on SM6375
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module provides clocks, resets and power
+  domains on Qualcomm SoCs.
+
+  See also:: include/dt-bindings/clock/qcom,sm6375-gpucc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6375-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+      - description: SNoC DVM GFX source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@5990000 {
+            compatible = "qcom,sm6375-gpucc";
+            reg = <0 0x05990000 0 0x9000>;
+            clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>,
+                     <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml
new file mode 100644
index 000000000000..0eb76d9d51c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm7150-gcc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm7150-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM7150
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Danila Tikhonov <danila@jiaxyga.com>
+  - David Wronek <davidwronek@gmail.com>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM7150
+
+  See also:: include/dt-bindings/clock/qcom,sm7150-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sm7150-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board XO Active-Only source
+      - description: Sleep clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,sm7150-gcc";
+      reg = <0x00100000 0x001f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
new file mode 100644
index 000000000000..87ae74166807
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM8450
+
+maintainers:
+  - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and power
+  domains on SM8450.
+
+  See also:: include/dt-bindings/clock/qcom,sm8450-camcc.h
+
+properties:
+  compatible:
+    const: qcom,sm8450-camcc
+
+  clocks:
+    items:
+      - description: Camera AHB clock from GCC
+      - description: Board XO source
+      - description: Board active XO source
+      - description: Sleep clock source
+
+  power-domains:
+    maxItems: 1
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+
+  required-opps:
+    maxItems: 1
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - required-opps
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@ade0000 {
+      compatible = "qcom,sm8450-camcc";
+      reg = <0xade0000 0x20000>;
+      clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&sleep_clk>;
+      power-domains = <&rpmhpd SM8450_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
new file mode 100644
index 000000000000..1dd1f696dcd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8450-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM8450
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8450.
+
+  See also:: include/dt-bindings/clock/qcom,sm8450-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-dispcc
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Display's AHB clock
+      - description: sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY0
+      - description: VCO DIV clock from DP PHY0
+      - description: Link clock from DP PHY1
+      - description: VCO DIV clock from DP PHY1
+      - description: Link clock from DP PHY2
+      - description: VCO DIV clock from DP PHY2
+      - description: Link clock from DP PHY3
+      - description: VCO DIV clock from DP PHY3
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8450-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd SM8450_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
new file mode 100644
index 000000000000..ab25f7cbaa2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8550-dispcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display Clock & Reset Controller for SM8550
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  Qualcomm display clock control module provides the clocks, resets and power
+  domains on SM8550.
+
+  See also:: include/dt-bindings/clock/qcom,sm8550-dispcc.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8550-dispcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Board Always On XO source
+      - description: Display's AHB clock
+      - description: sleep clock
+      - description: Byte clock from DSI PHY0
+      - description: Pixel clock from DSI PHY0
+      - description: Byte clock from DSI PHY1
+      - description: Pixel clock from DSI PHY1
+      - description: Link clock from DP PHY0
+      - description: VCO DIV clock from DP PHY0
+      - description: Link clock from DP PHY1
+      - description: VCO DIV clock from DP PHY1
+      - description: Link clock from DP PHY2
+      - description: VCO DIV clock from DP PHY2
+      - description: Link clock from DP PHY3
+      - description: VCO DIV clock from DP PHY3
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    clock-controller@af00000 {
+      compatible = "qcom,sm8550-dispcc";
+      reg = <0x0af00000 0x10000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&rpmhcc RPMH_CXO_CLK_A>,
+               <&gcc GCC_DISP_AHB_CLK>,
+               <&sleep_clk>,
+               <&dsi0_phy 0>,
+               <&dsi0_phy 1>,
+               <&dsi1_phy 0>,
+               <&dsi1_phy 1>,
+               <&dp0_phy 0>,
+               <&dp0_phy 1>,
+               <&dp1_phy 0>,
+               <&dp1_phy 1>,
+               <&dp2_phy 0>,
+               <&dp2_phy 1>,
+               <&dp3_phy 0>,
+               <&dp3_phy 1>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+      power-domains = <&rpmhpd SM8550_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml
new file mode 100644
index 000000000000..0c706de31cf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-gcc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8550-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller on SM8550
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm global clock control module provides the clocks, resets and power
+  domains on SM8550
+
+  See also:: include/dt-bindings/clock/qcom,sm8550-gcc.h
+
+properties:
+  compatible:
+    const: qcom,sm8550-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: PCIE 1 Pipe clock source
+      - description: PCIE 1 Phy Auxiliary clock source
+      - description: UFS Phy Rx symbol 0 clock source
+      - description: UFS Phy Rx symbol 1 clock source
+      - description: UFS Phy Tx symbol 0 clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,sm8550-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>,
+               <&pcie0_phy>,
+               <&pcie1_phy>,
+               <&pcie_1_phy_aux_clk>,
+               <&ufs_mem_phy 0>,
+               <&ufs_mem_phy 1>,
+               <&ufs_mem_phy 2>,
+               <&usb_1_qmpphy>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml
new file mode 100644
index 000000000000..1bf1a41fd89c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm8550-tcsr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm TCSR Clock Controller on SM8550
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description: |
+  Qualcomm TCSR clock control module provides the clocks, resets and
+  power domains on SM8550
+
+  See also:: include/dt-bindings/clock/qcom,sm8550-tcsr.h
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sm8550-tcsr
+      - const: syscon
+
+  clocks:
+    items:
+      - description: TCXO pad clock
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    clock-controller@1fc0000 {
+      compatible = "qcom,sm8550-tcsr", "syscon";
+      reg = <0x1fc0000 0x30000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt
deleted file mode 100644
index 7474aba36607..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Qualcomm Technologies, Inc. SPMI PMIC clock divider (clkdiv)
-
-clkdiv configures the clock frequency of a set of outputs on the PMIC.
-These clocks are typically wired through alternate functions on
-gpio pins.
-
-=======================
-Properties
-=======================
-
-- compatible
-	Usage:      required
-	Value type: <string>
-	Definition: must be "qcom,spmi-clkdiv".
-
-- reg
-	Usage:      required
-	Value type: <prop-encoded-array>
-	Definition: base address of CLKDIV peripherals.
-
-- qcom,num-clkdivs
-	Usage:      required
-	Value type: <u32>
-	Definition: number of CLKDIV peripherals.
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the xo clock.
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "xo".
-
-- #clock-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: shall contain 1.
-
-=======
-Example
-=======
-
-pm8998_clk_divs: clock-controller@5b00 {
-	compatible = "qcom,spmi-clkdiv";
-	reg = <0x5b00>;
-	#clock-cells = <1>;
-	qcom,num-clkdivs = <3>;
-	clocks = <&xo_board>;
-	clock-names = "xo";
-
-	assigned-clocks = <&pm8998_clk_divs 1>,
-			  <&pm8998_clk_divs 2>,
-			  <&pm8998_clk_divs 3>;
-	assigned-clock-rates = <9600000>,
-			       <9600000>,
-			       <9600000>;
-};
diff --git a/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.yaml b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.yaml
new file mode 100644
index 000000000000..16c95ad6c9d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,spmi-clkdiv.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,spmi-clkdiv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI PMIC clock divider
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Stephen Boyd <sboyd@kernel.org>
+
+description: |
+  Qualcomm SPMI PMIC clock divider configures the clock frequency of a set of
+  outputs on the PMIC.  These clocks are typically wired through alternate
+  functions on GPIO pins.
+
+properties:
+  compatible:
+    const: qcom,spmi-clkdiv
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: xo
+
+  "#clock-cells":
+    const: 1
+
+  qcom,num-clkdivs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of CLKDIV peripherals.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - qcom,num-clkdivs
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock-controller@5b00 {
+            compatible = "qcom,spmi-clkdiv";
+            reg = <0x5b00>;
+            clocks = <&xo_board>;
+            clock-names = "xo";
+            #clock-cells = <1>;
+            qcom,num-clkdivs = <3>;
+
+            assigned-clocks = <&pm8998_clk_divs 1>,
+                              <&pm8998_clk_divs 2>,
+                              <&pm8998_clk_divs 3>;
+            assigned-clock-rates = <9600000>,
+                                   <9600000>,
+                                   <9600000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
index 0d224f114b5b..2b07146161b4 100644
--- a/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,videocc.yaml
@@ -4,21 +4,21 @@
 $id: http://devicetree.org/schemas/clock/qcom,videocc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Video Clock & Reset Controller Binding
+title: Qualcomm Video Clock & Reset Controller
 
 maintainers:
   - Taniya Das <tdas@codeaurora.org>
 
 description: |
-  Qualcomm video clock control module which supports the clocks, resets and
-  power domains on Qualcomm SoCs.
+  Qualcomm video clock control module provides the clocks, resets and power
+  domains on Qualcomm SoCs.
 
-  See also:
-    dt-bindings/clock/qcom,videocc-sc7180.h
-    dt-bindings/clock/qcom,videocc-sc7280.h
-    dt-bindings/clock/qcom,videocc-sdm845.h
-    dt-bindings/clock/qcom,videocc-sm8150.h
-    dt-bindings/clock/qcom,videocc-sm8250.h
+  See also::
+    include/dt-bindings/clock/qcom,videocc-sc7180.h
+    include/dt-bindings/clock/qcom,videocc-sc7280.h
+    include/dt-bindings/clock/qcom,videocc-sdm845.h
+    include/dt-bindings/clock/qcom,videocc-sm8150.h
+    include/dt-bindings/clock/qcom,videocc-sm8250.h
 
 properties:
   compatible:
@@ -30,12 +30,12 @@ properties:
       - qcom,sm8250-videocc
 
   clocks:
-    items:
-      - description: Board XO source
+    minItems: 1
+    maxItems: 3
 
   clock-names:
-    items:
-      - const: bi_tcxo
+    minItems: 1
+    maxItems: 3
 
   '#clock-cells':
     const: 1
@@ -49,6 +49,16 @@ properties:
   reg:
     maxItems: 1
 
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      A phandle to an OPP node describing required MMCX performance point.
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -58,11 +68,63 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7180-videocc
+            - qcom,sdm845-videocc
+            - qcom,sm8150-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+        clock-names:
+          items:
+            - const: bi_tcxo
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7280-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Board XO source
+            - description: Board active XO source
+        clock-names:
+          items:
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sm8250-videocc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: AHB
+            - description: Board XO source
+            - description: Board active XO source
+        clock-names:
+          items:
+            - const: iface
+            - const: bi_tcxo
+            - const: bi_tcxo_ao
+
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
     clock-controller@ab00000 {
       compatible = "qcom,sdm845-videocc";
       reg = <0x0ab00000 0x10000>;
@@ -71,5 +133,7 @@ examples:
       #clock-cells = <1>;
       #reset-cells = <1>;
       #power-domain-cells = <1>;
+      power-domains = <&rpmhpd SM8250_MMCX>;
+      required-opps = <&rpmhpd_opp_low_svs>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
index f7d48f23da44..10119d9ef4b1 100644
--- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
+++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
@@ -44,6 +44,7 @@ Required properties:
 	* "fsl,ls1046a-clockgen"
 	* "fsl,ls1088a-clockgen"
 	* "fsl,ls2080a-clockgen"
+	* "fsl,lx2160a-clockgen"
 	Chassis-version clock strings include:
 	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
 	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
diff --git a/Documentation/devicetree/bindings/clock/renesas,9series.yaml b/Documentation/devicetree/bindings/clock/renesas,9series.yaml
new file mode 100644
index 000000000000..3afdebdb52ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,9series.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,9series.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas 9-series I2C PCIe clock generators
+
+description: |
+  The Renesas 9-series are I2C PCIe clock generators providing
+  from 1 to 20 output clocks.
+
+  When referencing the provided clock in the DT using phandle
+  and clock specifier, the following mapping applies:
+
+  - 9FGV0241:
+    0 -- DIF0
+    1 -- DIF1
+  - 9FGV0441:
+    0 -- DIF0
+    1 -- DIF1
+    2 -- DIF2
+    3 -- DIF3
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - renesas,9fgv0241
+      - renesas,9fgv0441
+
+  reg:
+    description: I2C device address
+    enum: [ 0x68, 0x6a ]
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: XTal input clock
+
+  renesas,out-amplitude-microvolt:
+    enum: [ 600000, 700000, 800000, 900000 ]
+    description: Output clock signal amplitude
+
+  renesas,out-spread-spectrum:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 100000, 99750, 99500 ]
+    description: Output clock down spread in pcm (1/1000 of percent)
+
+patternProperties:
+  "^DIF[0-19]$":
+    type: object
+    description:
+      Description of one of the outputs (DIF0..DIF19).
+
+    properties:
+      renesas,slew-rate:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 2000000, 3000000 ]
+        description: Output clock slew rate select in V/ns
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* 25MHz reference crystal */
+    ref25: ref25m {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <25000000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rs9: clock-generator@6a {
+            compatible = "renesas,9fgv0241";
+            reg = <0x6a>;
+            #clock-cells = <1>;
+
+            clocks = <&ref25m>;
+
+            DIF0 {
+                renesas,slew-rate = <3000000>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml
index c55a7c494e01..2197c952e21d 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clock.yaml
@@ -51,6 +51,18 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/r8a73a4-clock.h>
+
+    cpg_clocks: cpg_clocks@e6150000 {
+            compatible = "renesas,r8a73a4-cpg-clocks";
+            reg = <0xe6150000 0x10000>;
+            clocks = <&extal1_clk>, <&extal2_clk>;
+            #clock-cells = <1>;
+            clock-output-names = "main", "pll0", "pll1", "pll2",
+                                  "pll2s", "pll2h", "z", "z2",
+                                  "i", "m3", "b", "m1", "m2",
+                                  "zx", "zs", "hp";
+    };
+
     sdhi2_clk: sdhi2_clk@e615007c {
             compatible = "renesas,r8a73a4-div6-clock", "renesas,cpg-div6-clock";
             reg = <0xe615007c 4>;
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
index 9b414fbde6d7..9c3dc6c4fa94 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/clock/renesas,cpg-mssr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas Clock Pulse Generator / Module Standby and Software Reset
 
@@ -48,6 +48,8 @@ properties:
       - renesas,r8a77990-cpg-mssr # R-Car E3
       - renesas,r8a77995-cpg-mssr # R-Car D3
       - renesas,r8a779a0-cpg-mssr # R-Car V3U
+      - renesas,r8a779f0-cpg-mssr # R-Car S4-8
+      - renesas,r8a779g0-cpg-mssr # R-Car V4H
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt b/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt
deleted file mode 100644
index 399e0da22348..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,h8300-div-clock.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Renesas H8/300 divider clock
-
-Required Properties:
-
-  - compatible: Must be "renesas,h8300-div-clock"
-
-  - clocks: Reference to the parent clocks ("extal1" and "extal2")
-
-  - #clock-cells: Must be 1
-
-  - reg: Base address and length of the divide rate selector
-
-  - renesas,width: bit width of selector
-
-Example
--------
-
-		cclk: cclk {
-			compatible = "renesas,h8300-div-clock";
-			clocks = <&xclk>;
-			#clock-cells = <0>;
-			reg = <0xfee01b 2>;
-			renesas,width = <2>;
-		};
diff --git a/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt b/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt
deleted file mode 100644
index 500cdadbceb7..000000000000
--- a/Documentation/devicetree/bindings/clock/renesas,h8s2678-pll-clock.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Renesas H8S2678 PLL clock
-
-This device is Clock multiplyer
-
-Required Properties:
-
-  - compatible: Must be "renesas,h8s2678-pll-clock"
-
-  - clocks: Reference to the parent clocks
-
-  - #clock-cells: Must be 0
-
-  - reg: Two rate selector (Multiply / Divide) register address
-
-Example
--------
-
-		pllclk: pllclk {
-			compatible = "renesas,h8s2678-pll-clock";
-			clocks = <&xclk>;
-			#clock-cells = <0>;
-			reg = <0xfee03b 2>, <0xfee045 2>;
-		};
diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
index 25dbb0fac065..99686085f751 100644
--- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Renesas RZ/N1D (R9A06G032) System Controller
 
 maintainers:
-  - Gareth Williams <gareth.williams.jx@renesas.com>
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
   - Geert Uytterhoeven <geert+renesas@glider.be>
 
 properties:
@@ -39,6 +39,17 @@ properties:
   '#power-domain-cells':
     const: 0
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^dma-router@[a-f0-9]+$":
+    type: object
+    $ref: "../dma/renesas,rzn1-dmamux.yaml#"
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
index 6eaabb4d82ec..c84f29f1810f 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-usb2-clock-sel.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/clock/renesas,rcar-usb2-clock-sel.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/clock/renesas,rcar-usb2-clock-sel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas R-Car USB 2.0 clock selector
 
@@ -47,7 +47,6 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 4
     maxItems: 4
 
   clock-names:
@@ -64,7 +63,6 @@ properties:
     maxItems: 1
 
   resets:
-    minItems: 2
     maxItems: 2
 
   reset-names:
diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
index 30b2e3d0d25d..fe2fba18ae84 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
@@ -1,17 +1,18 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas RZ/G2L Clock Pulse Generator / Module Standby Mode
+title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
 
 description: |
-  On Renesas RZ/G2L SoC, the CPG (Clock Pulse Generator) and Module
-  Standby Mode share the same register block.
+  On Renesas RZ/{G2L,V2L}-alike SoC's, the CPG (Clock Pulse Generator) and Module
+  Standby Mode share the same register block. On RZ/V2M, the functionality is
+  similar, but does not have Clock Monitor Registers.
 
   They provide the following functionalities:
     - The CPG block generates various core clocks,
@@ -22,7 +23,11 @@ description: |
 
 properties:
   compatible:
-    const: renesas,r9a07g044-cpg  # RZ/G2{L,LC}
+    enum:
+      - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2} and RZ/Five
+      - renesas,r9a07g044-cpg # RZ/G2{L,LC}
+      - renesas,r9a07g054-cpg # RZ/V2L
+      - renesas,r9a09g011-cpg # RZ/V2M
 
   reg:
     maxItems: 1
@@ -40,9 +45,9 @@ properties:
     description: |
       - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
         and a core clock reference, as defined in
-        <dt-bindings/clock/r9a07g044-cpg.h>
+        <dt-bindings/clock/r9a0*-cpg.h>,
       - For module clocks, the two clock specifier cells must be "CPG_MOD" and
-        a module number, as defined in the <dt-bindings/clock/r9a07g044-cpg.h>.
+        a module number, as defined in <dt-bindings/clock/r9a0*-cpg.h>.
     const: 2
 
   '#power-domain-cells':
@@ -56,7 +61,7 @@ properties:
   '#reset-cells':
     description:
       The single reset specifier cell must be the module number, as defined in
-      the <dt-bindings/clock/r9a07g044-cpg.h>.
+      <dt-bindings/clock/r9a0*-cpg.h>.
     const: 1
 
 required:
diff --git a/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml b/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml
new file mode 100644
index 000000000000..b339f1f9f072
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,versaclock7.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/renesas,versaclock7.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Versaclock7 Programmable Clock
+
+maintainers:
+  - Alex Helms <alexander.helms.jy@renesas.com>
+
+description: |
+  Renesas Versaclock7 is a family of configurable clock generator and
+  jitter attenuator ICs with fractional and integer dividers.
+
+properties:
+  '#clock-cells':
+    const: 1
+
+  compatible:
+    enum:
+      - renesas,rc21008a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: External crystal or oscillator
+
+  clock-names:
+    items:
+      - const: xin
+
+required:
+  - '#clock-cells'
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    vc7_xin: clock {
+        compatible = "fixed-clock";
+        #clock-cells = <0>;
+        clock-frequency = <49152000>;
+    };
+
+    i2c@0 {
+        reg = <0x0 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vc7: clock-controller@9 {
+            compatible = "renesas,rc21008a";
+            reg = <0x9>;
+            #clock-cells = <1>;
+            clocks = <&vc7_xin>;
+            clock-names = "xin";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
deleted file mode 100644
index 55e78cddec8c..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Rockchip PX30 Clock and Reset Unit
-
-The PX30 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: PMU for CRU should be "rockchip,px30-pmu-cru"
-- compatible: CRU should be "rockchip,px30-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed
-          in clock-names
-- clock-names: Should contain the following:
-  - "xin24m" for both PMUCRU and CRU
-  - "gpll" for CRU (sourced from PMUCRU)
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "i2sx_clkin" - external I2S clock - optional,
- - "gmac_clkin" - external GMAC clock - optional
-
-Example: Clock controller node:
-
-	pmucru: clock-controller@ff2bc000 {
-		compatible = "rockchip,px30-pmucru";
-		reg = <0x0 0xff2bc000 0x0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	cru: clock-controller@ff2b0000 {
-		compatible = "rockchip,px30-cru";
-		reg = <0x0 0xff2b0000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@ff030000 {
-		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff030000 0x0 0x100>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
-		clock-names = "baudclk", "apb_pclk";
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml
new file mode 100644
index 000000000000..0f0f64b6f8cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,px30-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PX30 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The PX30 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input       - required
+    - "xin32k"     - rtc clock           - optional
+    - "i2sx_clkin" - external I2S clock  - optional
+    - "gmac_clkin" - external GMAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-cru
+      - rockchip,px30-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Clock for both PMUCRU and CRU
+      - description: Clock for CRU (sourced from PMUCRU)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - const: gpll
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#reset-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-cru
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+
+    pmucru: clock-controller@ff2bc000 {
+      compatible = "rockchip,px30-pmucru";
+      reg = <0xff2bc000 0x1000>;
+      clocks = <&xin24m>;
+      clock-names = "xin24m";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+    cru: clock-controller@ff2b0000 {
+      compatible = "rockchip,px30-cru";
+      reg = <0xff2b0000 0x1000>;
+      clocks = <&xin24m>, <&pmucru PLL_GPLL>;
+      clock-names = "xin24m", "gpll";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
deleted file mode 100644
index 20df350b9ef3..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Rockchip RK3036 Clock and Reset Unit
-
-The RK3036 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3036-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "rmii_clkin" - external EMAC clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3036-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@20060000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x20060000 0x100>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
new file mode 100644
index 000000000000..ba5b45464315
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3036-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3036 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3036 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input       - required
+    - "ext_i2s"    - external I2S clock  - optional
+    - "rmii_clkin" - external EMAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3036-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
deleted file mode 100644
index 6f8744fd301b..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Rockchip RK3126/RK3128 Clock and Reset Unit
-
-The RK3126/RK3128 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3126-cru" or "rockchip,rk3128-cru"
-  "rockchip,rk3126-cru" - controller compatible with RK3126 SoC.
-  "rockchip,rk3128-cru" - controller compatible with RK3128 SoC.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "gmac_clkin" - external GMAC clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3128-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart2: serial@20068000 {
-		compatible = "rockchip,serial";
-		reg = <0x20068000 0x100>;
-		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-		clock-frequency = <24000000>;
-		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
-		clock-names = "sclk_uart", "pclk_uart";
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
new file mode 100644
index 000000000000..b3d9c8eca989
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3128-cru.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3128-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3126/RK3128 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3126/RK3128 clock controller generates and supplies clock to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3128-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3126-cru
+      - rockchip,rk3128-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+      - enum:
+          - ext_i2s
+          - gmac_clkin
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3128-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
deleted file mode 100644
index 7f368530a2e4..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip RK3188/RK3066 Clock and Reset Unit
-
-The RK3188/RK3066 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or
-			"rockchip,rk3066a-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
-dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
-Similar macros exist for the reset sources in these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "xin27m" - 27mhz crystal input on rk3066 - optional,
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_cif0" - external camera clock - optional,
- - "ext_rmii" - external RMII clock - optional,
- - "ext_jtag" - externalJTAG clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3188-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml
new file mode 100644
index 000000000000..ddd7e46af0f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3188/RK3066 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+  dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+  Similar macros exist for the reset sources in these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"    - crystal input                 - required
+    - "xin32k"    - RTC clock                     - optional
+    - "xin27m"    - 27mhz crystal input on RK3066 - optional
+    - "ext_hsadc" - external HSADC clock          - optional
+    - "ext_cif0"  - external camera clock         - optional
+    - "ext_rmii"  - external RMII clock           - optional
+    - "ext_jtag"  - external JTAG clock           - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3066a-cru
+      - rockchip,rk3188-cru
+      - rockchip,rk3188a-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3188-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
deleted file mode 100644
index f323048127eb..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Rockchip RK3228 Clock and Reset Unit
-
-The RK3228 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3228-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
- - "ext_hsadc" - external HSADC clock - optional
- - "phy_50m_out" - output clock of the pll in the mac phy
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3228-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10110000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10110000 0x100>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml
new file mode 100644
index 000000000000..1050fff72ade
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3228-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3228 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3228 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input                          - required
+    - "ext_i2s"     - external I2S clock                     - optional
+    - "ext_gmac"    - external GMAC clock                    - optional
+    - "ext_hsadc"   - external HSADC clock                   - optional
+    - "phy_50m_out" - output clock of the pll in the mac phy
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3228-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3228-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
deleted file mode 100644
index bf3a9ec19241..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Rockchip RK3288 Clock and Reset Unit
-
-The RK3288 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-A revision of this SoC is available: rk3288w. The clock tree is a bit
-different so another dt-compatible is available. Noticed that it is only
-setting the difference but there is no automatic revision detection. This
-should be performed by bootloaders.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3288-cru" or "rockchip,rk3288w-cru" in
-  case of this revision of Rockchip rk3288.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_edp_24m" - external display port clock - optional,
- - "ext_vip" - external VIP clock - optional,
- - "ext_isp" - external ISP clock - optional,
- - "ext_jtag" - external JTAG clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3188-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
new file mode 100644
index 000000000000..6655e97d52e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3288 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3288 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+
+  A revision of this SoC is available: rk3288w. The clock tree is a bit
+  different so another dt-compatible is available. Noticed that it is only
+  setting the difference but there is no automatic revision detection. This
+  should be performed by boot loaders.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input               - required,
+    - "xin32k"      - rtc clock                   - optional,
+    - "ext_i2s"     - external I2S clock          - optional,
+    - "ext_hsadc"   - external HSADC clock        - optional,
+    - "ext_edp_24m" - external display port clock - optional,
+    - "ext_vip"     - external VIP clock          - optional,
+    - "ext_isp"     - external ISP clock          - optional,
+    - "ext_jtag"    - external JTAG clock         - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-cru
+      - rockchip,rk3288w-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3288-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt
deleted file mode 100644
index 9b151c5b0c90..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Rockchip RK3308 Clock and Reset Unit
-
-The RK3308 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: CRU should be "rockchip,rk3308-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in", "mclk_i2s2_8ch_in",
-   "mclk_i2s3_8ch_in", "mclk_i2s0_2ch_in",
-   "mclk_i2s1_2ch_in" - external I2S or SPDIF clock - optional,
- - "mac_clkin" - external MAC clock - optional
-
-Example: Clock controller node:
-
-	cru: clock-controller@ff500000 {
-		compatible = "rockchip,rk3308-cru";
-		reg = <0x0 0xff500000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@ff0a0000 {
-		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff0a0000 0x0 0x100>;
-		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
-		clock-names = "baudclk", "apb_pclk";
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml
new file mode 100644
index 000000000000..fec37f5b80f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3308-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3308 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3308 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"                               - crystal input      - required
+    - "xin32k"                               - rtc clock          - optional
+    - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in",
+      "mclk_i2s2_8ch_in", "mclk_i2s3_8ch_in",
+      "mclk_i2s0_2ch_in", "mclk_i2s1_2ch_in" - external I2S or
+                                               SPDIF clock        - optional
+    - "mac_clkin"                            - external MAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3308-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff500000 {
+      compatible = "rockchip,rk3308-cru";
+      reg = <0xff500000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
deleted file mode 100644
index 7c8bbcfed8d2..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip RK3368 Clock and Reset Unit
-
-The RK3368 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3368-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_isp" - external ISP clock - optional,
- - "ext_jtag" - external JTAG clock - optional
- - "ext_vip" - external VIP clock - optional,
- - "usbotg_out" - output clock of the pll in the otg phy
-
-Example: Clock controller node:
-
-	cru: clock-controller@ff760000 {
-		compatible = "rockchip,rk3368-cru";
-		reg = <0x0 0xff760000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml
new file mode 100644
index 000000000000..90af242b41c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3368-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3368 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3368 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input                          - required
+    - "xin32k"     - rtc clock                              - optional
+    - "ext_i2s"    - external I2S clock                     - optional
+    - "ext_gmac"   - external GMAC clock                    - optional
+    - "ext_hsadc"  - external HSADC clock                   - optional
+    - "ext_isp"    - external ISP clock                     - optional
+    - "ext_jtag"   - external JTAG clock                    - optional
+    - "ext_vip"    - external VIP clock                     - optional
+    - "usbotg_out" - output clock of the pll in the otg phy
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3368-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3368-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
index 72b286a1beba..0b758e015ee3 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/clock/rockchip,rk3399-cru.yaml#
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Rockchip RK3399 Clock and Reset Unit
 
 maintainers:
-  - Xing Zheng <zhengxing@rock-chips.com>
+  - Elaine Zhang <zhangqing@rock-chips.com>
   - Heiko Stuebner <heiko@sntech.de>
 
 description: |
@@ -22,11 +22,11 @@ description: |
   There are several clocks that are generated outside the SoC. It is expected
   that they are defined using standard clock bindings with following
   clock-output-names:
-    - "xin24m" - crystal input - required,
-    - "xin32k" - rtc clock - optional,
-    - "clkin_gmac" - external GMAC clock - optional,
-    - "clkin_i2s" - external I2S clock - optional,
-    - "pclkin_cif" - external ISP clock - optional,
+    - "xin24m"           - crystal input                          - required,
+    - "xin32k"           - rtc clock                              - optional,
+    - "clkin_gmac"       - external GMAC clock                    - optional,
+    - "clkin_i2s"        - external I2S clock                     - optional,
+    - "pclkin_cif"       - external ISP clock                     - optional,
     - "clk_usbphy0_480m" - output clock of the pll in the usbphy0
     - "clk_usbphy1_480m" - output clock of the pll in the usbphy1
 
@@ -46,24 +46,15 @@ properties:
     const: 1
 
   clocks:
-    minItems: 1
-
-  assigned-clocks:
-    minItems: 1
-    maxItems: 64
-
-  assigned-clock-parents:
-    minItems: 1
-    maxItems: 64
+    maxItems: 1
 
-  assigned-clock-rates:
-    minItems: 1
-    maxItems: 64
+  clock-names:
+    const: xin24m
 
   rockchip,grf:
     $ref: /schemas/types.yaml#/definitions/phandle
-    description: >
-      phandle to the syscon managing the "general register files". It is used
+    description:
+      Phandle to the syscon managing the "general register files". It is used
       for GRF muxes, if missing any muxes present in the GRF will not be
       available.
 
@@ -77,7 +68,7 @@ additionalProperties: false
 
 examples:
   - |
-    pmucru: pmu-clock-controller@ff750000 {
+    pmucru: clock-controller@ff750000 {
       compatible = "rockchip,rk3399-pmucru";
       reg = <0xff750000 0x1000>;
       #clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
index b2c26097827f..f809c289445e 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/rockchip,rk3568-cru.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROCKCHIP rk3568 Family Clock Control Module Binding
+title: ROCKCHIP rk3568 Family Clock Control Module
 
 maintainers:
   - Elaine Zhang <zhangqing@rock-chips.com>
@@ -34,6 +34,19 @@ properties:
   "#reset-cells":
     const: 1
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3588-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3588-cru.yaml
new file mode 100644
index 000000000000..74cd3f3f229a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3588-cru.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3588-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3588 Family Clock and Reset Control Module
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3588 clock controller generates the clock and also implements a reset
+  controller for SoC peripherals. For example it provides SCLK_UART2 and
+  PCLK_UART2, as well as SRST_P_UART2 and SRST_S_UART2 for the second UART
+  module.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clock and reset IDs
+  are defined as preprocessor macros in dt-binding headers.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3588-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: xin24m
+      - const: xin32k
+
+  assigned-clocks: true
+
+  assigned-clock-rates: true
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: >
+      phandle to the syscon managing the "general register files". It is used
+      for GRF muxes, if missing any muxes present in the GRF will not be
+      available.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@fd7c0000 {
+      compatible = "rockchip,rk3588-cru";
+      reg = <0xfd7c0000 0x5c000>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt
deleted file mode 100644
index 161326a4f9c1..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* Rockchip RV1108 Clock and Reset Unit
-
-The RV1108 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rv1108-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_vip" - external VIP clock - optional
- - "ext_i2s" - external I2S clock - optional
- - "ext_gmac" - external GMAC clock - optional
- - "hdmiphy" - external clock input derived from HDMI PHY - optional
- - "usbphy" - external clock input derived from USB PHY - optional
-
-Example: Clock controller node:
-
-	cru: cru@20200000 {
-		compatible = "rockchip,rv1108-cru";
-		reg = <0x20200000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10230000 {
-		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
-		reg = <0x10230000 0x100>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml
new file mode 100644
index 000000000000..4611d920b8df
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rv1108-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RV1108 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RV1108 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"   - crystal input                              - required
+    - "ext_vip"  - external VIP clock                         - optional
+    - "ext_i2s"  - external I2S clock                         - optional
+    - "ext_gmac" - external GMAC clock                        - optional
+    - "hdmiphy"  - external clock input derived from HDMI PHY - optional
+    - "usbphy"   - external clock input derived from USB PHY  - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rv1108-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20200000 {
+      compatible = "rockchip,rv1108-cru";
+      reg = <0x20200000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml
new file mode 100644
index 000000000000..0998f8b922bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rv1126-cru.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rv1126-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RV1126 Clock and Reset Unit
+
+maintainers:
+  - Jagan Teki <jagan@edgeble.ai>
+  - Finley Xiao <finley.xiao@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description:
+  The RV1126 clock controller generates the clock and also implements a
+  reset controller for SoC peripherals.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rv1126-cru
+      - rockchip,rv1126-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff490000 {
+      compatible = "rockchip,rv1126-cru";
+      reg = <0xff490000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
index f14f1d39da36..d819dfaafff9 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-audss-clock.yaml
@@ -8,7 +8,7 @@ title: Samsung Exynos SoC Audio SubSystem clock controller
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
index 4e8062860986..0589a63e273a 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
@@ -8,7 +8,7 @@ title: Samsung Exynos SoC clock controller
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml
index 64d027dbe3b2..c98eff64f2b5 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos-ext-clock.yaml
@@ -8,7 +8,7 @@ title: Samsung SoC external/osc/XXTI/XusbXTI clock
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
index 1ed64add4355..bee13436d1ea 100644
--- a/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos4412-isp-clock.yaml
@@ -8,7 +8,7 @@ title: Samsung Exynos4412 SoC ISP clock controller
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
@@ -61,4 +61,3 @@ examples:
         clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>;
         clock-names = "aclk200", "aclk400_mcuisp";
     };
-
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml
new file mode 100644
index 000000000000..b05f83533e3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml
@@ -0,0 +1,382 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5260-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5260 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+    - "xrtcxti" - input clock from XRTCXTI
+    - "ioclk_pcm_extclk" - pcm external operation clock
+    - "ioclk_spdif_extclk" - spdif external operation clock
+    - "ioclk_i2s_cdclk" - i2s0 codec clock
+
+  Phy clocks::
+  There are several clocks which are generated by specific PHYs.  These clocks
+  are fed into the clock controller and then routed to the hardware blocks.
+  These clocks are defined as fixed clocks in the driver with following names::
+    - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
+    - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
+    - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
+    - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
+    - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
+    - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
+    - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
+    - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
+    - "phyclk_dptx_phy_clk_div2"
+    - "phyclk_mipi_dphy_4l_m_rxclkesc0"
+    - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
+    - "phyclk_usbhost20_phy_freeclk"
+    - "phyclk_usbhost20_phy_clk48mohci"
+    - "phyclk_usbdrd30_udrd30_pipe_pclk"
+    - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5260-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5260-clock-top
+      - samsung,exynos5260-clock-peri
+      - samsung,exynos5260-clock-egl
+      - samsung,exynos5260-clock-kfc
+      - samsung,exynos5260-clock-g2d
+      - samsung,exynos5260-clock-mif
+      - samsung,exynos5260-clock-mfc
+      - samsung,exynos5260-clock-g3d
+      - samsung,exynos5260-clock-fsys
+      - samsung,exynos5260-clock-aud
+      - samsung,exynos5260-clock-isp
+      - samsung,exynos5260-clock-gscl
+      - samsung,exynos5260-clock-disp
+
+  clocks:
+    minItems: 1
+    maxItems: 19
+
+  clock-names:
+    minItems: 1
+    maxItems: 19
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_mem_pll
+            - const: dout_bus_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-peri
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: ioclk_pcm_extclk
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_spdif_extclk
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: dout_aclk_peri_66
+            - const: dout_sclk_peri_uart0
+            - const: dout_sclk_peri_uart1
+            - const: dout_sclk_peri_uart2
+            - const: dout_sclk_peri_spi0_b
+            - const: dout_sclk_peri_spi1_b
+            - const: dout_sclk_peri_spi2_b
+            - const: dout_aclk_peri_aud
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-egl
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-kfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_g2d_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_mfc_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_usbhost20_phy_phyclock
+            - const: phyclk_usbhost20_phy_freeclk
+            - const: phyclk_usbhost20_phy_clk48mohci
+            - const: phyclk_usbdrd30_udrd30_pipe_pclk
+            - const: phyclk_usbdrd30_udrd30_phyclock
+            - const: dout_aclk_fsys_200
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_pcm_extclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-isp
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_isp1_266
+            - const: dout_aclk_isp1_400
+            - const: mout_aclk_isp1_266
+
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_gscl_400
+            - const: dout_aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-disp
+    then:
+      properties:
+        clocks:
+          minItems: 19
+          maxItems: 19
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_dptx_phy_ch3_txd_clk
+            - const: phyclk_dptx_phy_ch2_txd_clk
+            - const: phyclk_dptx_phy_ch1_txd_clk
+            - const: phyclk_dptx_phy_ch0_txd_clk
+            - const: phyclk_hdmi_phy_tmds_clko
+            - const: phyclk_hdmi_phy_ref_clko
+            - const: phyclk_hdmi_phy_pixel_clko
+            - const: phyclk_hdmi_link_o_tmds_clkhi
+            - const: phyclk_mipi_dphy_4l_m_txbyte_clkhs
+            - const: phyclk_dptx_phy_o_ref_clk_24m
+            - const: phyclk_dptx_phy_clk_div2
+            - const: phyclk_mipi_dphy_4l_m_rxclkesc0
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: ioclk_spdif_extclk
+            - const: dout_aclk_peri_aud
+            - const: dout_aclk_disp_222
+            - const: dout_sclk_disp_pixel
+            - const: dout_aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5260-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5260-clock-top";
+        reg = <0x10010000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_mif MIF_DOUT_MEM_PLL>,
+                 <&clock_mif MIF_DOUT_BUS_PLL>,
+                 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+        clock-names = "fin_pll",
+                      "dout_mem_pll",
+                      "dout_bus_pll",
+                      "dout_media_pll";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml
new file mode 100644
index 000000000000..b737c9d35a1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5410-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5410 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5410.h header.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5410-clock
+
+  clocks:
+    description:
+      Should contain an entry specifying the root clock from external
+      oscillator supplied through XXTI or XusbXTI pin.  This clock should be
+      defined using standard clock bindings with "fin_pll" clock-output-name.
+      That clock is being passed internally to the 9 PLLs.
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5410.h>
+
+    fin_pll: osc-clock {
+        compatible = "fixed-clock";
+        clock-frequency = <24000000>;
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5410-clock";
+        reg = <0x10010000 0x30000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml
new file mode 100644
index 000000000000..3f9326e09f79
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml
@@ -0,0 +1,524 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5433-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "oscclk" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5433.h header.
+
+properties:
+  compatible:
+    enum:
+        # CMU_TOP which generates clocks for
+        # IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS domains and bus
+        # clocks
+      - samsung,exynos5433-cmu-top
+        # CMU_CPIF which generates clocks for LLI (Low Latency Interface) IP
+      - samsung,exynos5433-cmu-cpif
+        # CMU_MIF which generates clocks for DRAM Memory Controller domain
+      - samsung,exynos5433-cmu-mif
+        # CMU_PERIC which generates clocks for
+        # UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs
+      - samsung,exynos5433-cmu-peric
+        # CMU_PERIS which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs
+      - samsung,exynos5433-cmu-peris
+        # CMU_FSYS which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs
+      - samsung,exynos5433-cmu-fsys
+      - samsung,exynos5433-cmu-g2d
+        # CMU_DISP which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs
+      - samsung,exynos5433-cmu-disp
+      - samsung,exynos5433-cmu-aud
+      - samsung,exynos5433-cmu-bus0
+      - samsung,exynos5433-cmu-bus1
+      - samsung,exynos5433-cmu-bus2
+      - samsung,exynos5433-cmu-g3d
+      - samsung,exynos5433-cmu-gscl
+      - samsung,exynos5433-cmu-apollo
+        # CMU_ATLAS which generates clocks for Cortex-A57 Quad-core processor,
+        # CoreSight and  L2 cache controller
+      - samsung,exynos5433-cmu-atlas
+        # CMU_MSCL which generates clocks for M2M (Memory to Memory) scaler and
+        # JPEG IPs
+      - samsung,exynos5433-cmu-mscl
+      - samsung,exynos5433-cmu-mfc
+      - samsung,exynos5433-cmu-hevc
+        # CMU_ISP which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs
+      - samsung,exynos5433-cmu-isp
+        # CMU_CAM0 which generates clocks for
+        # MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs
+      - samsung,exynos5433-cmu-cam0
+        # CMU_CAM1 which generates clocks for
+        # Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs
+      - samsung,exynos5433-cmu-cam1
+        # CMU_IMEM which generates clocks for SSS (Security SubSystem) and
+        # SlimSSS IPs
+      - samsung,exynos5433-cmu-imem
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+            - const: sclk_mfc_pll
+            - const: sclk_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cpif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: oscclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mif
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 10
+          maxItems: 10
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_ufs_mphy
+            - const: aclk_fsys_200
+            - const: sclk_pcie_100_fsys
+            - const: sclk_ufsunipro_fsys
+            - const: sclk_mmc2_fsys
+            - const: sclk_mmc1_fsys
+            - const: sclk_mmc0_fsys
+            - const: sclk_usbhost30_fsys
+            - const: sclk_usbdrd30_fsys
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g2d_266
+            - const: aclk_g2d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-disp
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_dsim1_disp
+            - const: sclk_dsim0_disp
+            - const: sclk_dsd_disp
+            - const: sclk_decon_tv_eclk_disp
+            - const: sclk_decon_vclk_disp
+            - const: sclk_decon_eclk_disp
+            - const: sclk_decon_tv_vclk_disp
+            - const: aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus0
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus0_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus1
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus1_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus2
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_bus2_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g3d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_gscl_111
+            - const: aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-apollo
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_apollo
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-atlas
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_atlas
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_jpeg_mscl
+            - const: aclk_mscl_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_mfc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-hevc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_hevc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-isp
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_isp_dis_400
+            - const: aclk_isp_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam0
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_cam0_333
+            - const: aclk_cam0_400
+            - const: aclk_cam0_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_isp_uart_cam1
+            - const: sclk_isp_spi1_cam1
+            - const: sclk_isp_spi0_cam1
+            - const: aclk_cam1_333
+            - const: aclk_cam1_400
+            - const: aclk_cam1_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-imem
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_imem_sssx_266
+            - const: aclk_imem_266
+            - const: aclk_imem_200
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    xxti: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "oscclk";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10030000 {
+        compatible = "samsung,exynos5433-cmu-top";
+        reg = <0x10030000 0x1000>;
+        #clock-cells = <1>;
+
+        clock-names = "oscclk",
+                      "sclk_mphy_pll",
+                      "sclk_mfc_pll",
+                      "sclk_bus_pll";
+        clocks = <&xxti>,
+                 <&cmu_cpif CLK_SCLK_MPHY_PLL>,
+                 <&cmu_mif CLK_SCLK_MFC_PLL>,
+                 <&cmu_mif CLK_SCLK_BUS_PLL>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml
new file mode 100644
index 000000000000..c137c6744ef9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos7-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7-clock-topc
+      - samsung,exynos7-clock-top0
+      - samsung,exynos7-clock-top1
+      - samsung,exynos7-clock-ccore
+      - samsung,exynos7-clock-peric0
+      - samsung,exynos7-clock-peric1
+      - samsung,exynos7-clock-peris
+      - samsung,exynos7-clock-fsys0
+      - samsung,exynos7-clock-fsys1
+      - samsung,exynos7-clock-mscl
+      - samsung,exynos7-clock-aud
+
+  clocks:
+    minItems: 1
+    maxItems: 13
+
+  clock-names:
+    minItems: 1
+    maxItems: 13
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top0
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+            - const: dout_sclk_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top1
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-ccore
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_ccore_133
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric0_66
+            - const: sclk_uart0
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric1
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric1_66
+            - const: sclk_uart1
+            - const: sclk_uart2
+            - const: sclk_uart3
+            - const: sclk_spi0
+            - const: sclk_spi1
+            - const: sclk_spi2
+            - const: sclk_spi3
+            - const: sclk_spi4
+            - const: sclk_i2s1
+            - const: sclk_pcm1
+            - const: sclk_spdif
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peris
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peris_66
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys0_200
+            - const: dout_sclk_mmc2
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys1_200
+            - const: dout_sclk_mmc0
+            - const: dout_sclk_mmc1
+            - const: dout_sclk_ufsunipro20
+            - const: dout_sclk_phy_fsys1
+            - const: dout_sclk_phy_fsys1_26m
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos7-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@105e0000 {
+        compatible = "samsung,exynos7-clock-top1";
+        reg = <0x105e0000 0xb000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_topc DOUT_SCLK_BUS0_PLL>,
+                 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+                 <&clock_topc DOUT_SCLK_CC_PLL>,
+                 <&clock_topc DOUT_SCLK_MFC_PLL>;
+        clock-names = "fin_pll",
+                      "dout_sclk_bus0_pll",
+                      "dout_sclk_bus1_pll",
+                      "dout_sclk_cc_pll",
+                      "dout_sclk_mfc_pll";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml
new file mode 100644
index 000000000000..006d33a9e0f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos7885-clock.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7885-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7885 SoC clock controller
+
+maintainers:
+  - Dávid Virág <virag.david003@gmail.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos7885 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. The root clock in that root tree
+  is an external clock: OSCCLK (26 MHz). This external clock must be defined
+  as a fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/exynos7885.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7885-cmu-top
+      - samsung,exynos7885-cmu-core
+      - samsung,exynos7885-cmu-fsys
+      - samsung,exynos7885-cmu-peri
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+            - description: CCI clock (from CMU_TOP)
+            - description: G3D clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_core_bus
+            - const: dout_core_cci
+            - const: dout_core_g3d
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-fsys
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS bus clock (from CMU_TOP)
+            - description: MMC_CARD clock (from CMU_TOP)
+            - description: MMC_EMBD clock (from CMU_TOP)
+            - description: MMC_SDIO clock (from CMU_TOP)
+            - description: USB30DRD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_fsys_bus
+            - const: dout_fsys_mmc_card
+            - const: dout_fsys_mmc_embd
+            - const: dout_fsys_mmc_sdio
+            - const: dout_fsys_usb30drd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7885-cmu-peri
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERI bus clock (from CMU_TOP)
+            - description: SPI0 clock (from CMU_TOP)
+            - description: SPI1 clock (from CMU_TOP)
+            - description: UART0 clock (from CMU_TOP)
+            - description: UART1 clock (from CMU_TOP)
+            - description: UART2 clock (from CMU_TOP)
+            - description: USI0 clock (from CMU_TOP)
+            - description: USI1 clock (from CMU_TOP)
+            - description: USI2 clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_peri_bus
+            - const: dout_peri_spi0
+            - const: dout_peri_spi1
+            - const: dout_peri_uart0
+            - const: dout_peri_uart1
+            - const: dout_peri_uart2
+            - const: dout_peri_usi0
+            - const: dout_peri_usi1
+            - const: dout_peri_usi2
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERI
+  - |
+    #include <dt-bindings/clock/exynos7885.h>
+
+    cmu_peri: clock-controller@10010000 {
+        compatible = "samsung,exynos7885-cmu-peri";
+        reg = <0x10010000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>,
+                 <&cmu_top CLK_DOUT_PERI_BUS>,
+                 <&cmu_top CLK_DOUT_PERI_SPI0>,
+                 <&cmu_top CLK_DOUT_PERI_SPI1>,
+                 <&cmu_top CLK_DOUT_PERI_UART0>,
+                 <&cmu_top CLK_DOUT_PERI_UART1>,
+                 <&cmu_top CLK_DOUT_PERI_UART2>,
+                 <&cmu_top CLK_DOUT_PERI_USI0>,
+                 <&cmu_top CLK_DOUT_PERI_USI1>,
+                 <&cmu_top CLK_DOUT_PERI_USI2>;
+        clock-names = "oscclk",
+                      "dout_peri_bus",
+                      "dout_peri_spi0",
+                      "dout_peri_spi1",
+                      "dout_peri_uart0",
+                      "dout_peri_uart1",
+                      "dout_peri_uart2",
+                      "dout_peri_usi0",
+                      "dout_peri_usi1",
+                      "dout_peri_usi2";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
new file mode 100644
index 000000000000..c752c8985a53
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
@@ -0,0 +1,311 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos850-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos850 SoC clock controller
+
+maintainers:
+  - Sam Protsenko <semen.protsenko@linaro.org>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos850 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK (26 MHz) and RTCCLK (32768 Hz). Those external
+  clocks must be defined as fixed-rate clocks in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'dt-bindings/clock/exynos850.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos850-cmu-top
+      - samsung,exynos850-cmu-apm
+      - samsung,exynos850-cmu-aud
+      - samsung,exynos850-cmu-cmgp
+      - samsung,exynos850-cmu-core
+      - samsung,exynos850-cmu-dpu
+      - samsung,exynos850-cmu-g3d
+      - samsung,exynos850-cmu-hsi
+      - samsung,exynos850-cmu-is
+      - samsung,exynos850-cmu-mfcmscl
+      - samsung,exynos850-cmu-peri
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-apm
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_APM bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_apm_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-aud
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: AUD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_aud
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-cmgp
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CMGP bus clock (from CMU_APM)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: gout_clkcmu_cmgp_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+            - description: CCI clock (from CMU_TOP)
+            - description: eMMC clock (from CMU_TOP)
+            - description: SSS clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_core_bus
+            - const: dout_core_cci
+            - const: dout_core_mmc_embd
+            - const: dout_core_sss
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-dpu
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: DPU clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_dpu
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-g3d
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: G3D clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_g3d_switch
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-hsi
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: External RTC clock (32768 Hz)
+            - description: CMU_HSI bus clock (from CMU_TOP)
+            - description: SD card clock (from CMU_TOP)
+            - description: USB 2.0 DRD clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: rtcclk
+            - const: dout_hsi_bus
+            - const: dout_hsi_mmc_card
+            - const: dout_hsi_usb20drd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-is
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_IS bus clock (from CMU_TOP)
+            - description: Image Texture Processing core clock (from CMU_TOP)
+            - description: Visual Recognition Accelerator clock (from CMU_TOP)
+            - description: Geometric Distortion Correction clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_is_bus
+            - const: dout_is_itp
+            - const: dout_is_vra
+            - const: dout_is_gdc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-mfcmscl
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: Multi-Format Codec clock (from CMU_TOP)
+            - description: Memory to Memory Scaler clock (from CMU_TOP)
+            - description: Multi-Channel Scaler clock (from CMU_TOP)
+            - description: JPEG codec clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_mfcmscl_mfc
+            - const: dout_mfcmscl_m2m
+            - const: dout_mfcmscl_mcsc
+            - const: dout_mfcmscl_jpeg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos850-cmu-peri
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERI bus clock (from CMU_TOP)
+            - description: UART clock (from CMU_TOP)
+            - description: Parent clock for HSI2C and SPI (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_peri_bus
+            - const: dout_peri_uart
+            - const: dout_peri_ip
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_PERI
+  - |
+    #include <dt-bindings/clock/exynos850.h>
+
+    cmu_peri: clock-controller@10030000 {
+        compatible = "samsung,exynos850-cmu-peri";
+        reg = <0x10030000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>,
+                 <&cmu_top CLK_DOUT_PERI_UART>,
+                 <&cmu_top CLK_DOUT_PERI_IP>;
+        clock-names = "oscclk", "dout_peri_bus",
+                      "dout_peri_uart", "dout_peri_ip";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
new file mode 100644
index 000000000000..55c4f94a14d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov9-clock.yaml
@@ -0,0 +1,263 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynosautov9-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos Auto v9 SoC clock controller
+
+maintainers:
+  - Chanho Park <chanho61.park@samsung.com>
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Exynos Auto v9 clock controller is comprised of several CMU units, generating
+  clocks for different domains. Those CMU units are modeled as separate device
+  tree nodes, and might depend on each other. Root clocks in that clock tree are
+  two external clocks:: OSCCLK/XTCXO (26 MHz) and RTCCLK/XrtcXTI (32768 Hz).
+  The external OSCCLK must be defined as fixed-rate clock in dts.
+
+  CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and
+  dividers; all other clocks of function blocks (other CMUs) are usually
+  derived from CMU_TOP.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All clocks available for usage
+  in clock consumer nodes are defined as preprocessor macros in
+  'include/dt-bindings/clock/samsung,exynosautov9.h' header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynosautov9-cmu-top
+      - samsung,exynosautov9-cmu-busmc
+      - samsung,exynosautov9-cmu-core
+      - samsung,exynosautov9-cmu-fsys0
+      - samsung,exynosautov9-cmu-fsys1
+      - samsung,exynosautov9-cmu-fsys2
+      - samsung,exynosautov9-cmu-peric0
+      - samsung,exynosautov9-cmu-peric1
+      - samsung,exynosautov9-cmu-peris
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+
+        clock-names:
+          items:
+            - const: oscclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-busmc
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_BUSMC bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_busmc_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-core
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_CORE bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_core_bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS0 bus clock (from CMU_TOP)
+            - description: CMU_FSYS0 pcie clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys0_bus
+            - const: dout_clkcmu_fsys0_pcie
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS1 bus clock (from CMU_TOP)
+            - description: CMU_FSYS1 mmc card clock (from CMU_TOP)
+            - description: CMU_FSYS1 usb clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys1_bus
+            - const: gout_clkcmu_fsys1_mmc_card
+            - const: dout_clkcmu_fsys1_usbdrd
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-fsys2
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_FSYS2 bus clock (from CMU_TOP)
+            - description: UFS clock (from CMU_TOP)
+            - description: Ethernet clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_fsys2_bus
+            - const: dout_fsys2_clkcmu_ufs_embd
+            - const: dout_fsys2_clkcmu_ethernet
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peric0
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC0 bus clock (from CMU_TOP)
+            - description: PERIC0 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peric0_bus
+            - const: dout_clkcmu_peric0_ip
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peric1
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIC1 bus clock (from CMU_TOP)
+            - description: PERIC1 IP clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peric1_bus
+            - const: dout_clkcmu_peric1_ip
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynosautov9-cmu-peris
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (26 MHz)
+            - description: CMU_PERIS bus clock (from CMU_TOP)
+
+        clock-names:
+          items:
+            - const: oscclk
+            - const: dout_clkcmu_peris_bus
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_FSYS2
+  - |
+    #include <dt-bindings/clock/samsung,exynosautov9.h>
+
+    cmu_fsys2: clock-controller@17c00000 {
+        compatible = "samsung,exynosautov9-cmu-fsys2";
+        reg = <0x17c00000 0x8000>;
+        #clock-cells = <1>;
+
+        clocks = <&xtcxo>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_BUS>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_UFS_EMBD>,
+                 <&cmu_top DOUT_CLKCMU_FSYS2_ETHERNET>;
+        clock-names = "oscclk",
+                      "dout_clkcmu_fsys2_bus",
+                      "dout_fsys2_clkcmu_ufs_embd",
+                      "dout_fsys2_clkcmu_ethernet";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt b/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
deleted file mode 100644
index 2726c1d58a79..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Binding for Samsung S2M and S5M family clock generator block
-============================================================
-
-This is a part of device tree bindings for S2M and S5M family multi-function
-devices.
-More information can be found in bindings/mfd/sec-core.txt file.
-
-The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz
-outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs.
-
-To register these as clocks with common clock framework instantiate under
-main device node a sub-node named "clocks".
-
-It uses the common clock binding documented in:
- - Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-
-Required properties of the "clocks" sub-node:
- - #clock-cells: should be 1.
- - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
-               "samsung,s2mps14-clk", "samsung,s5m8767-clk"
-   The S2MPS15 uses the same compatible as S2MPS13, as both provides similar
-   clocks.
-
-
-Each clock is assigned an identifier and client nodes use this identifier
-to specify the clock which they consume.
-    Clock               ID           Devices
-    ----------------------------------------------------------
-    32KhzAP		0            S2MPS11/13/14/15, S5M8767
-    32KhzCP		1            S2MPS11/13/15, S5M8767
-    32KhzBT		2            S2MPS11/13/14/15, S5M8767
-
-Include dt-bindings/clock/samsung,s2mps11.h file to use preprocessor defines
-in device tree sources.
-
-
-Example:
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-
-		s2m_osc: clocks {
-			compatible = "samsung,s2mps11-clk";
-			#clock-cells = <1>;
-			clock-output-names = "xx", "yy", "zz";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
new file mode 100644
index 000000000000..d5296e6053a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s2mps11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2M and S5M family clock generator block
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz
+  outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs.
+
+  All available clocks are defined as preprocessor macros in
+  dt-bindings/clock/samsung,s2mps11.h header.
+
+  See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s2mps11-clk
+      - samsung,s2mps13-clk # S2MPS13 and S2MPS15
+      - samsung,s2mps14-clk
+      - samsung,s5m8767-clk
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    maxItems: 3
+    description: Names for AP, CP and BT clocks.
+
+required:
+  - compatible
+  - "#clock-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
deleted file mode 100644
index 2632d3f13004..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Samsung S3C2410 Clock Controller
-
-The S3C2410 clock controller generates and supplies clock to various controllers
-within the SoC. The clock binding described here is applicable to the s3c2410,
-s3c2440 and s3c2442 SoCs in the s3c24x family.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC.
-  - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC.
-  - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Some of the clocks are available only
-on a particular SoC.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s3c2410.h header and can be used in device
-tree sources.
-
-External clocks:
-
-The xti clock used as input for the plls is generated outside the SoC. It is
-expected that is are defined using standard clock bindings with a
-clock-output-names value of "xti".
-
-Example: Clock controller node:
-
-	clocks: clock-controller@4c000000 {
-		compatible = "samsung,s3c2410-clock";
-		reg = <0x4c000000 0x20>;
-		#clock-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-	serial@50004000 {
-		compatible = "samsung,s3c2440-uart";
-		reg = <0x50004000 0x4000>;
-		interrupts = <1 23 3 4>, <1 23 4 4>;
-		clock-names = "uart", "clk_uart_baud2";
-		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
deleted file mode 100644
index 21a8c23e658f..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Samsung S3C2412 Clock Controller
-
-The S3C2412 clock controller generates and supplies clock to various controllers
-within the SoC. The clock binding described here is applicable to the s3c2412
-and s3c2413 SoCs in the s3c24x family.
-
-Required Properties:
-
-- compatible: should be "samsung,s3c2412-clock"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Some of the clocks are available only
-on a particular SoC.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s3c2412.h header and can be used in device
-tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xti" - crystal input - required,
- - "ext" - external clock source - optional,
-
-Example: Clock controller node:
-
-	clocks: clock-controller@4c000000 {
-		compatible = "samsung,s3c2412-clock";
-		reg = <0x4c000000 0x20>;
-		#clock-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-	serial@50004000 {
-		compatible = "samsung,s3c2412-uart";
-		reg = <0x50004000 0x4000>;
-		interrupts = <1 23 3 4>, <1 23 4 4>;
-		clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3";
-		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
-			 <&clocks SCLK_UART>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
deleted file mode 100644
index 985c0f574e9a..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s3c2443-clock.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Samsung S3C2443 Clock Controller
-
-The S3C2443 clock controller generates and supplies clock to various controllers
-within the SoC. The clock binding described here is applicable to all SoCs in
-the s3c24x family starting with the s3c2443.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,s3c2416-clock" - controller compatible with S3C2416 SoC.
-  - "samsung,s3c2443-clock" - controller compatible with S3C2443 SoC.
-  - "samsung,s3c2450-clock" - controller compatible with S3C2450 SoC.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Some of the clocks are available only
-on a particular SoC.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s3c2443.h header and can be used in device
-tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xti" - crystal input - required,
- - "ext" - external clock source - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_uart" - external uart clock - optional,
-
-Example: Clock controller node:
-
-	clocks: clock-controller@4c000000 {
-		compatible = "samsung,s3c2416-clock";
-		reg = <0x4c000000 0x40>;
-		#clock-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-	serial@50004000 {
-		compatible = "samsung,s3c2440-uart";
-		reg = <0x50004000 0x4000>;
-		interrupts = <1 23 3 4>, <1 23 4 4>;
-		clock-names = "uart", "clk_uart_baud2",
-				"clk_uart_baud3";
-		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
-				<&clocks SCLK_UART>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml
index ae8f8fc93233..2659854ea1c0 100644
--- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-audss-clock.yaml
@@ -8,7 +8,7 @@ title: Samsung S5Pv210 SoC Audio SubSystem clock controller
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Sylwester Nawrocki <s.nawrocki@samsung.com>
   - Tomasz Figa <tomasz.figa@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
deleted file mode 100644
index a86c83bf9d4e..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Samsung S5P6442/S5PC110/S5PV210 Clock Controller
-
-Samsung S5P6442, S5PC110 and S5PV210 SoCs contain integrated clock
-controller, which generates and supplies clock to various controllers
-within the SoC.
-
-Required Properties:
-
-- compatible: should be one of following:
-	- "samsung,s5pv210-clock" : for clock controller of Samsung
-	  S5PC110/S5PV210 SoCs,
-	- "samsung,s5p6442-clock" : for clock controller of Samsung
-	  S5P6442 SoC.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s5pv210.h header and can be used in device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xxti": external crystal oscillator connected to XXTI and XXTO pins of
-the SoC,
- - "xusbxti": external crystal oscillator connected to XUSBXTI and XUSBXTO
-pins of the SoC,
-
-A subset of above clocks available on given board shall be specified in
-board device tree, including the system base clock, as selected by XOM[0]
-pin of the SoC. Refer to generic fixed rate clock bindings
-documentation[1] for more information how to specify these clocks.
-
-[1] Documentation/devicetree/bindings/clock/fixed-clock.yaml
-
-Example: Clock controller node:
-
-	clock: clock-controller@7e00f000 {
-		compatible = "samsung,s5pv210-clock";
-		reg = <0x7e00f000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-Example: Required external clocks:
-
-	xxti: clock-xxti {
-		compatible = "fixed-clock";
-		clock-output-names = "xxti";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
-	xusbxti: clock-xusbxti {
-		compatible = "fixed-clock";
-		clock-output-names = "xusbxti";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-	uart0: serial@e2900000 {
-		compatible = "samsung,s5pv210-uart";
-		reg = <0xe2900000 0x400>;
-		interrupt-parent = <&vic1>;
-		interrupts = <10>;
-		clock-names = "uart", "clk_uart_baud0",
-				"clk_uart_baud1";
-		clocks = <&clocks UART0>, <&clocks UART0>,
-				<&clocks SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml
new file mode 100644
index 000000000000..67a33665cf00
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s5pv210-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P6442/S5PC110/S5PV210 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "xxti" - external crystal oscillator connected to XXTI and XXTO pins of
+      the SoC,
+    - "xusbxti" - external crystal oscillator connected to XUSBXTI and XUSBXTO
+      pins of the SoC,
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/s5pv210.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-clock
+      - samsung,s5p6442-clock
+
+  clocks:
+    items:
+      - description: xxti clock
+      - description: xusbxti clock
+
+  clock-names:
+    items:
+      - const: xxti
+      - const: xusbxti
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/s5pv210.h>
+
+    xxti: clock-0 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xxti";
+        #clock-cells = <0>;
+    };
+
+    xusbxti: clock-1 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xusbxti";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@e0100000 {
+        compatible = "samsung,s5pv210-clock";
+        reg = <0xe0100000 0x10000>;
+        clock-names = "xxti", "xusbxti";
+        clocks = <&xxti>, <&xusbxti>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
index c3be1b600007..c79e752283aa 100644
--- a/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
+++ b/Documentation/devicetree/bindings/clock/sifive/fu540-prci.yaml
@@ -8,7 +8,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: SiFive FU540 Power Reset Clock Interrupt Controller (PRCI)
 
 maintainers:
-  - Sagar Kadam <sagar.kadam@sifive.com>
   - Paul Walmsley  <paul.walmsley@sifive.com>
 
 description:
diff --git a/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml
index e17143cac316..252085a0cf65 100644
--- a/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml
+++ b/Documentation/devicetree/bindings/clock/sifive/fu740-prci.yaml
@@ -42,6 +42,9 @@ properties:
   "#clock-cells":
     const: 1
 
+  "#reset-cells":
+    const: 1
+
 required:
   - compatible
   - reg
@@ -57,4 +60,5 @@ examples:
       reg = <0x10000000 0x1000>;
       clocks = <&hfclk>, <&rtcclk>;
       #clock-cells = <1>;
+      #reset-cells = <1>;
     };
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
index 8fe6f80afade..bfda6af76bee 100644
--- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt
+++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
@@ -2,7 +2,7 @@ Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
 
 Reference
 [1] Si5351A/B/C Data Sheet
-    https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
+    https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf
 
 The Si5351a/b/c are programmable i2c clock generators with up to 8 output
 clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
diff --git a/Documentation/devicetree/bindings/clock/skyworks,si521xx.yaml b/Documentation/devicetree/bindings/clock/skyworks,si521xx.yaml
new file mode 100644
index 000000000000..9e35e0e51ce8
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/skyworks,si521xx.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/skyworks,si521xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Skyworks Si521xx I2C PCIe clock generators
+
+description: |
+  The Skyworks Si521xx are I2C PCIe clock generators providing
+  from 4 to 9 output clocks.
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  compatible:
+    enum:
+      - skyworks,si52144
+      - skyworks,si52146
+      - skyworks,si52147
+
+  reg:
+    const: 0x6b
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    items:
+      - description: XTal input clock
+
+  skyworks,out-amplitude-microvolt:
+    enum: [ 300000, 400000, 500000, 600000, 700000, 800000, 900000, 1000000 ]
+    description: Output clock signal amplitude
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        clock-generator@6b {
+            compatible = "skyworks,si52144";
+            reg = <0x6b>;
+            #clock-cells = <1>;
+            clocks = <&ref25m>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
index c3930edc410f..4e82582fb2f3 100644
--- a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
@@ -23,6 +23,7 @@ properties:
           - socionext,uniphier-ld11-clock
           - socionext,uniphier-ld20-clock
           - socionext,uniphier-pxs3-clock
+          - socionext,uniphier-nx1-clock
       - description: Media I/O (MIO) clock, SD clock
         enum:
           - socionext,uniphier-ld4-mio-clock
@@ -33,6 +34,7 @@ properties:
           - socionext,uniphier-ld11-mio-clock
           - socionext,uniphier-ld20-sd-clock
           - socionext,uniphier-pxs3-sd-clock
+          - socionext,uniphier-nx1-sd-clock
       - description: Peripheral clock
         enum:
           - socionext,uniphier-ld4-peri-clock
@@ -43,6 +45,10 @@ properties:
           - socionext,uniphier-ld11-peri-clock
           - socionext,uniphier-ld20-peri-clock
           - socionext,uniphier-pxs3-peri-clock
+          - socionext,uniphier-nx1-peri-clock
+      - description: SoC-glue clock
+        enum:
+          - socionext,uniphier-pro4-sg-clock
 
   "#clock-cells":
     const: 1
@@ -55,40 +61,7 @@ required:
 
 examples:
   - |
-    sysctrl@61840000 {
-        compatible = "socionext,uniphier-sysctrl", "simple-mfd", "syscon";
-        reg = <0x61840000 0x4000>;
-
-        clock {
-            compatible = "socionext,uniphier-ld11-clock";
-            #clock-cells = <1>;
-        };
-
-        // other nodes ...
-    };
-
-  - |
-    mioctrl@59810000 {
-        compatible = "socionext,uniphier-mioctrl", "simple-mfd", "syscon";
-        reg = <0x59810000 0x800>;
-
-        clock {
-            compatible = "socionext,uniphier-ld11-mio-clock";
-            #clock-cells = <1>;
-        };
-
-        // other nodes ...
-    };
-
-  - |
-    perictrl@59820000 {
-        compatible = "socionext,uniphier-perictrl", "simple-mfd", "syscon";
-        reg = <0x59820000 0x200>;
-
-        clock {
-            compatible = "socionext,uniphier-ld11-peri-clock";
-            #clock-cells = <1>;
-        };
-
-        // other nodes ...
+    clock-controller {
+        compatible = "socionext,uniphier-ld11-clock";
+        #clock-cells = <1>;
     };
diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
index 47e1ab08c95d..1703e305e6d8 100644
--- a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
@@ -2,10 +2,10 @@
 # Copyright 2019 Unisoc Inc.
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: SC9863A Clock Control Unit Device Tree Bindings
+title: SC9863A Clock Control Unit
 
 maintainers:
   - Orson Zhai <orsonzhai@gmail.com>
diff --git a/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml
new file mode 100644
index 000000000000..43d2b6c31357
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sprd,ums512-clk.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sprd,ums512-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UMS512 Soc clock controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - sprd,ums512-apahb-gate
+      - sprd,ums512-ap-clk
+      - sprd,ums512-aonapb-clk
+      - sprd,ums512-pmu-gate
+      - sprd,ums512-g0-pll
+      - sprd,ums512-g2-pll
+      - sprd,ums512-g3-pll
+      - sprd,ums512-gc-pll
+      - sprd,ums512-aon-gate
+      - sprd,ums512-audcpapb-gate
+      - sprd,ums512-audcpahb-gate
+      - sprd,ums512-gpu-clk
+      - sprd,ums512-mm-clk
+      - sprd,ums512-mm-gate-clk
+      - sprd,ums512-apapb-gate
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+    description: |
+      The input parent clock(s) phandle for the clock, only list
+      fixed clocks which are declared in devicetree.
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: ext-26m
+      - const: ext-32k
+      - const: ext-4m
+      - const: rco-100m
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ap_clk: clock-controller@20200000 {
+      compatible = "sprd,ums512-ap-clk";
+      reg = <0x20200000 0x1000>;
+      clocks = <&ext_26m>;
+      clock-names = "ext-26m";
+      #clock-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
index 8b1ecb2ecdd5..5194be0b410e 100644
--- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
+++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/clock/st,stm32mp1-rcc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Reset Clock Controller Binding
+title: STMicroelectronics STM32MP1 Reset Clock Controller
 
 maintainers:
-  - Gabriel Fernandez <gabriel.fernandez@st.com>
+  - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
 
 description: |
   The RCC IP is both a reset and a clock controller.
@@ -41,6 +41,7 @@ description: |
 
   The list of valid indices for STM32MP1 is available in:
   include/dt-bindings/reset-controller/stm32mp1-resets.h
+  include/dt-bindings/reset-controller/stm32mp13-resets.h
 
   This file implements defines like:
   #define LTDC_R	3072
@@ -57,7 +58,10 @@ properties:
       - enum:
           - st,stm32mp1-rcc-secure
           - st,stm32mp1-rcc
+          - st,stm32mp13-rcc
       - const: syscon
+  clocks: true
+  clock-names: true
 
   reg:
     maxItems: 1
@@ -68,14 +72,54 @@ required:
   - compatible
   - reg
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,stm32mp1-rcc-secure
+          - st,stm32mp13-rcc
+then:
+  properties:
+    clocks:
+      description: Specifies oscillators.
+      maxItems: 5
+
+    clock-names:
+      items:
+        - const: hse
+        - const: hsi
+        - const: csi
+        - const: lse
+        - const: lsi
+  required:
+    - clocks
+    - clock-names
+else:
+  properties:
+    clocks:
+      description:
+        Specifies the external RX clock for ethernet MAC.
+      maxItems: 1
+
+    clock-names:
+      const: ETH_RX_CLK/ETH_REF_CLK
+
 additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
     rcc: rcc@50000000 {
         compatible = "st,stm32mp1-rcc-secure", "syscon";
         reg = <0x50000000 0x1000>;
         #clock-cells = <1>;
         #reset-cells = <1>;
+        clock-names = "hse", "hsi", "csi", "lse", "lsi";
+        clocks = <&scmi_clk CK_SCMI_HSE>,
+                 <&scmi_clk CK_SCMI_HSI>,
+                 <&scmi_clk CK_SCMI_CSI>,
+                 <&scmi_clk CK_SCMI_LSE>,
+                 <&scmi_clk CK_SCMI_LSI>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
index 55a18939bddd..c918075405ba 100644
--- a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -78,7 +78,7 @@ Required properties:
 - #clock-cells : from common clock binding; shall be set to 1 (multiple clock
   outputs).
 
-- clocks : must be set to the parent's phandle. it's could be output clocks of
+- clocks : must be set to the parent's phandle. it could be output clocks of
   a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks)
 
 - clock-output-names : List of strings used to name the clock outputs.
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml
new file mode 100644
index 000000000000..8f49a1ae03f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7100-audclk.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7100-audclk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Audio Clock Generator
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7100-audclk
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Audio source clock
+      - description: External 12.288MHz clock
+      - description: Domain 7 AHB bus clock
+
+  clock-names:
+    items:
+      - const: audio_src
+      - const: audio_12288
+      - const: dom7ahb_bus
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive-jh7100-audio.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive-jh7100.h>
+
+    clock-controller@10480000 {
+            compatible = "starfive,jh7100-audclk";
+            reg = <0x10480000 0x10000>;
+            clocks = <&clkgen JH7100_CLK_AUDIO_SRC>,
+                     <&clkgen JH7100_CLK_AUDIO_12288>,
+                     <&clkgen JH7100_CLK_DOM7AHB_BUS>;
+            clock-names = "audio_src", "audio_12288", "dom7ahb_bus";
+            #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml
new file mode 100644
index 000000000000..12f17b60ecbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7100-clkgen.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7100-clkgen.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Clock Generator
+
+maintainers:
+  - Geert Uytterhoeven <geert@linux-m68k.org>
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7100-clkgen
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Main clock source (25 MHz)
+      - description: Application-specific clock source (12-27 MHz)
+      - description: RMII reference clock (50 MHz)
+      - description: RGMII RX clock (125 MHz)
+
+  clock-names:
+    items:
+      - const: osc_sys
+      - const: osc_aud
+      - const: gmac_rmii_ref
+      - const: gmac_gr_mii_rxclk
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive-jh7100.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@11800000 {
+            compatible = "starfive,jh7100-clkgen";
+            reg = <0x11800000 0x10000>;
+            clocks = <&osc_sys>, <&osc_aud>, <&gmac_rmii_ref>, <&gmac_gr_mii_rxclk>;
+            clock-names = "osc_sys", "osc_aud", "gmac_rmii_ref", "gmac_gr_mii_rxclk";
+            #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
new file mode 100644
index 000000000000..923680a44aef
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-aoncrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 Always-On Clock and Reset Generator
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7110-aoncrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC0 RMII reference or GMAC0 RGMII RX
+          - description: STG AXI/AHB
+          - description: APB Bus
+          - description: GMAC0 GTX
+
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC0 RMII reference or GMAC0 RGMII RX
+          - description: STG AXI/AHB or GMAC0 RGMII RX
+          - description: APB Bus or STG AXI/AHB
+          - description: GMAC0 GTX or APB Bus
+          - description: RTC Oscillator (32.768 kHz) or GMAC0 GTX
+
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC0 RMII reference
+          - description: GMAC0 RGMII RX
+          - description: STG AXI/AHB
+          - description: APB Bus
+          - description: GMAC0 GTX
+          - description: RTC Oscillator (32.768 kHz)
+
+  clock-names:
+    oneOf:
+      - minItems: 5
+        items:
+          - const: osc
+          - enum:
+              - gmac0_rmii_refin
+              - gmac0_rgmii_rxin
+          - const: stg_axiahb
+          - const: apb_bus
+          - const: gmac0_gtxclk
+          - const: rtc_osc
+
+      - minItems: 6
+        items:
+          - const: osc
+          - const: gmac0_rmii_refin
+          - const: gmac0_rgmii_rxin
+          - const: stg_axiahb
+          - const: apb_bus
+          - const: gmac0_gtxclk
+          - const: rtc_osc
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive,jh7110-crg.h>
+
+    clock-controller@17000000 {
+        compatible = "starfive,jh7110-aoncrg";
+        reg = <0x17000000 0x10000>;
+        clocks = <&osc>, <&gmac0_rmii_refin>,
+                 <&gmac0_rgmii_rxin>,
+                 <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
+                 <&syscrg JH7110_SYSCLK_APB_BUS>,
+                 <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>,
+                 <&rtc_osc>;
+        clock-names = "osc", "gmac0_rmii_refin",
+                      "gmac0_rgmii_rxin", "stg_axiahb",
+                      "apb_bus", "gmac0_gtxclk",
+                      "rtc_osc";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
new file mode 100644
index 000000000000..84373ae31644
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-syscrg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 System Clock and Reset Generator
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: starfive,jh7110-syscrg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    oneOf:
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC1 RMII reference or GMAC1 RGMII RX
+          - description: External I2S TX bit clock
+          - description: External I2S TX left/right channel clock
+          - description: External I2S RX bit clock
+          - description: External I2S RX left/right channel clock
+          - description: External TDM clock
+          - description: External audio master clock
+
+      - items:
+          - description: Main Oscillator (24 MHz)
+          - description: GMAC1 RMII reference
+          - description: GMAC1 RGMII RX
+          - description: External I2S TX bit clock
+          - description: External I2S TX left/right channel clock
+          - description: External I2S RX bit clock
+          - description: External I2S RX left/right channel clock
+          - description: External TDM clock
+          - description: External audio master clock
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: osc
+          - enum:
+              - gmac1_rmii_refin
+              - gmac1_rgmii_rxin
+          - const: i2stx_bclk_ext
+          - const: i2stx_lrck_ext
+          - const: i2srx_bclk_ext
+          - const: i2srx_lrck_ext
+          - const: tdm_ext
+          - const: mclk_ext
+
+      - items:
+          - const: osc
+          - const: gmac1_rmii_refin
+          - const: gmac1_rgmii_rxin
+          - const: i2stx_bclk_ext
+          - const: i2stx_lrck_ext
+          - const: i2srx_bclk_ext
+          - const: i2srx_lrck_ext
+          - const: tdm_ext
+          - const: mclk_ext
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+  '#reset-cells':
+    const: 1
+    description:
+      See <dt-bindings/reset/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@13020000 {
+        compatible = "starfive,jh7110-syscrg";
+        reg = <0x13020000 0x10000>;
+        clocks = <&osc>, <&gmac1_rmii_refin>,
+                 <&gmac1_rgmii_rxin>,
+                 <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
+                 <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
+                 <&tdm_ext>, <&mclk_ext>;
+        clock-names = "osc", "gmac1_rmii_refin",
+                      "gmac1_rgmii_rxin",
+                      "i2stx_bclk_ext", "i2stx_lrck_ext",
+                      "i2srx_bclk_ext", "i2srx_lrck_ext",
+                      "tdm_ext", "mclk_ext";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
new file mode 100644
index 000000000000..2150307219a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/stericsson,u8500-clks.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson DB8500 (U8500) clocks
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: While named "U8500 clocks" these clocks are inside the
+  DB8500 digital baseband system-on-chip and its siblings such as
+  DB8520. These bindings consider the clocks present in the SoC
+  itself, not off-chip clocks. There are four different on-chip
+  clocks - RTC (32 kHz), CPU clock (SMP TWD), PRCMU (power reset and
+  control management unit) clocks and PRCC (peripheral reset and
+  clock controller) clocks. For some reason PRCC 4 does not exist so
+  the itemization can be a bit unintuitive.
+
+properties:
+  compatible:
+    enum:
+      - stericsson,u8500-clks
+      - stericsson,u8540-clks
+      - stericsson,u9540-clks
+
+  reg:
+    items:
+      - description: PRCC 1 register area
+      - description: PRCC 2 register area
+      - description: PRCC 3 register area
+      - description: PRCC 5 register area
+      - description: PRCC 6 register area
+
+  prcmu-clock:
+    description: A subnode with one clock cell for PRCMU (power, reset, control
+      management unit) clocks. The cell indicates which PRCMU clock in the
+      prcmu-clock node the consumer wants to use.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 1
+
+    additionalProperties: false
+
+  prcc-periph-clock:
+    description: A subnode with two clock cells for PRCC (peripheral
+      reset and clock controller) peripheral clocks. The first cell indicates
+      which PRCC block the consumer wants to use, possible values are 1, 2, 3,
+      5, 6. The second cell indicates which clock inside the PRCC block it
+      wants, possible values are 0 thru 31.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 2
+
+    additionalProperties: false
+
+  prcc-kernel-clock:
+    description: A subnode with two clock cells for PRCC (peripheral reset
+      and clock controller) kernel clocks. The first cell indicates which PRCC
+      block the consumer wants to use, possible values are 1, 2, 3, 5, 6. The
+      second cell indicates which clock inside the PRCC block it wants, possible
+      values are 0 thru 31.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 2
+
+    additionalProperties: false
+
+  prcc-reset-controller:
+    description: A subnode with two reset cells for the reset portions of the
+      PRCC (peripheral reset and clock controller). The first cell indicates
+      which PRCC block the consumer wants to use, possible values are 1, 2, 3
+      5 and 6. The second cell indicates which reset line inside the PRCC block
+      it wants to control, possible values are 0 thru 31.
+    type: object
+
+    properties:
+      '#reset-cells':
+        const: 2
+
+    additionalProperties: false
+
+  rtc32k-clock:
+    description: A subnode with zero clock cells for the 32kHz RTC clock.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 0
+
+    additionalProperties: false
+
+  smp-twd-clock:
+    description: A subnode for the ARM SMP Timer Watchdog cluster with zero
+      clock cells.
+    type: object
+
+    properties:
+      '#clock-cells':
+        const: 0
+
+    additionalProperties: false
+
+  clkout-clock:
+    description: A subnode with three clock cells for externally routed clocks,
+      output clocks. These are two PRCMU-internal clocks that can be divided and
+      muxed out on the pads of the DB8500 SoC.
+    type: object
+
+    properties:
+      '#clock-cells':
+        description:
+          The first cell indicates which output clock we are using,
+          possible values are 0 (CLKOUT1) and 1 (CLKOUT2).
+          The second cell indicates which clock we want to use as source,
+          possible values are 0 thru 7, see the defines for the different
+          source clocks.
+          The third cell is a divider, legal values are 1 thru 63.
+        const: 3
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - prcmu-clock
+  - prcc-periph-clock
+  - prcc-kernel-clock
+  - rtc32k-clock
+  - smp-twd-clock
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ste-db8500-clkout.h>
+    clocks@8012 {
+      compatible = "stericsson,u8500-clks";
+      reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+            <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+            <0xa03cf000 0x1000>;
+
+      prcmu_clk: prcmu-clock {
+        #clock-cells = <1>;
+      };
+
+      prcc_pclk: prcc-periph-clock {
+        #clock-cells = <2>;
+      };
+
+      prcc_kclk: prcc-kernel-clock {
+        #clock-cells = <2>;
+      };
+
+      prcc_reset: prcc-reset-controller {
+        #reset-cells = <2>;
+      };
+
+      rtc_clk: rtc32k-clock {
+        #clock-cells = <0>;
+      };
+
+      smp_twd_clk: smp-twd-clock {
+        #clock-cells = <0>;
+      };
+
+      clkout_clk: clkout-clock {
+        #clock-cells = <3>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
new file mode 100644
index 000000000000..bcc14088220a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/sunplus,sp7021-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Clock Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    const: sunplus,sp7021-clkc
+
+  reg:
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    extclk: osc0 {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency = <27000000>;
+      clock-output-names = "extclk";
+    };
+
+    clkc: clock-controller@9c000004 {
+      compatible = "sunplus,sp7021-clkc";
+      reg = <0x9c000004 0x28>,
+            <0x9c000200 0x44>,
+            <0x9c000268 0x08>;
+      clocks = <&extclk>;
+      #clock-cells = <1>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml b/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml
new file mode 100644
index 000000000000..dc808e2f8327
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/tesla,fsd-clock.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/tesla,fsd-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tesla FSD (Full Self-Driving) SoC clock controller
+
+maintainers:
+  - Alim Akhtar <alim.akhtar@samsung.com>
+  - linux-fsd@tesla.com
+
+description: |
+  FSD clock controller consist of several clock management unit
+  (CMU), which generates clocks for various inteernal SoC blocks.
+  The root clock comes from external OSC clock (24 MHz).
+
+  All available clocks are defined as preprocessor macros in
+  'dt-bindings/clock/fsd-clk.h' header.
+
+properties:
+  compatible:
+    enum:
+      - tesla,fsd-clock-cmu
+      - tesla,fsd-clock-imem
+      - tesla,fsd-clock-peric
+      - tesla,fsd-clock-fsys0
+      - tesla,fsd-clock-fsys1
+      - tesla,fsd-clock-mfc
+      - tesla,fsd-clock-cam_csi
+
+  clocks:
+    minItems: 1
+    maxItems: 6
+
+  clock-names:
+    minItems: 1
+    maxItems: 6
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-cmu
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-imem
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: IMEM TCU clock (from CMU_CMU)
+            - description: IMEM bus clock (from CMU_CMU)
+            - description: IMEM DMA clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_imem_tcuclk
+            - const: dout_cmu_imem_aclk
+            - const: dout_cmu_imem_dmaclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-peric
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: Shared0 PLL div4 clock (from CMU_CMU)
+            - description: PERIC shared1 div36 clock (from CMU_CMU)
+            - description: PERIC shared0 div3 TBU clock (from CMU_CMU)
+            - description: PERIC shared0 div20 clock (from CMU_CMU)
+            - description: PERIC shared1 div4 DMAclock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_pll_shared0_div4
+            - const: dout_cmu_peric_shared1div36
+            - const: dout_cmu_peric_shared0div3_tbuclk
+            - const: dout_cmu_peric_shared0div20
+            - const: dout_cmu_peric_shared1div4_dmaclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-fsys0
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: Shared0 PLL div6 clock (from CMU_CMU)
+            - description: FSYS0 shared1 div4 clock (from CMU_CMU)
+            - description: FSYS0 shared0 div4 clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_pll_shared0_div6
+            - const: dout_cmu_fsys0_shared1div4
+            - const: dout_cmu_fsys0_shared0div4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-fsys1
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+            - description: FSYS1 shared0 div8 clock (from CMU_CMU)
+            - description: FSYS1 shared0 div4 clock (from CMU_CMU)
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_cmu_fsys1_shared0div8
+            - const: dout_cmu_fsys1_shared0div4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-mfc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: tesla,fsd-clock-cam_csi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: External reference clock (24 MHz)
+        clock-names:
+          items:
+            - const: fin_pll
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Clock controller node for CMU_FSYS1
+  - |
+    #include <dt-bindings/clock/fsd-clk.h>
+
+    clock_fsys1: clock-controller@16810000 {
+          compatible = "tesla,fsd-clock-fsys1";
+          reg = <0x16810000 0x3000>;
+          #clock-cells = <1>;
+
+          clocks = <&fin_pll>,
+                   <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>,
+                   <&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>;
+          clock-names = "fin_pll",
+                        "dout_cmu_fsys1_shared0div8",
+                        "dout_cmu_fsys1_shared0div4";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
index 9b537bc876b5..66765116aff5 100644
--- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
@@ -15,6 +15,7 @@ properties:
       - enum:
           - ti,am654-ehrpwm-tbclk
           - ti,am64-epwm-tbclk
+          - ti,am62-epwm-tbclk
       - const: syscon
 
   "#clock-cells":
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/Documentation/devicetree/bindings/clock/ti,cdce925.txt
deleted file mode 100644
index df42ab72718f..000000000000
--- a/Documentation/devicetree/bindings/clock/ti,cdce925.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Binding for TI CDCE913/925/937/949 programmable I2C clock synthesizers.
-
-Reference
-This binding uses the common clock binding[1].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] https://www.ti.com/product/cdce913
-[3] https://www.ti.com/product/cdce925
-[4] https://www.ti.com/product/cdce937
-[5] https://www.ti.com/product/cdce949
-
-The driver provides clock sources for each output Y1 through Y5.
-
-Required properties:
- - compatible: Shall be one of the following:
-	- "ti,cdce913": 1-PLL, 3 Outputs
-	- "ti,cdce925": 2-PLL, 5 Outputs
-	- "ti,cdce937": 3-PLL, 7 Outputs
-	- "ti,cdce949": 4-PLL, 9 Outputs
- - reg: I2C device address.
- - clocks: Points to a fixed parent clock that provides the input frequency.
- - #clock-cells: From common clock bindings: Shall be 1.
-
-Optional properties:
- - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a
-                 board, or to compensate for external influences.
-- vdd-supply: A regulator node for Vdd
-- vddout-supply: A regulator node for Vddout
-
-For all PLL1, PLL2, ... an optional child node can be used to specify spread
-spectrum clocking parameters for a board.
-  - spread-spectrum: SSC mode as defined in the data sheet.
-  - spread-spectrum-center: Use "centered" mode instead of "max" mode. When
-    present, the clock runs at the requested frequency on average. Otherwise
-    the requested frequency is the maximum value of the SCC range.
-
-
-Example:
-
-	clockgen: cdce925pw@64 {
-		compatible = "cdce925";
-		reg = <0x64>;
-		clocks = <&xtal_27Mhz>;
-		#clock-cells = <1>;
-		xtal-load-pf = <5>;
-		vdd-supply = <&1v8-reg>;
-		vddout-supply = <&3v3-reg>;
-		/* PLL options to get SSC 1% centered */
-		PLL2 {
-			spread-spectrum = <4>;
-			spread-spectrum-center;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.yaml b/Documentation/devicetree/bindings/clock/ti,cdce925.yaml
new file mode 100644
index 000000000000..a4ec8dd5ddf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,cdce925.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti,cdce925.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI CDCE913/925/937/949 programmable I2C clock synthesizers
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+description: |
+  Flexible Low Power LVCMOS Clock Generator with SSC Support for EMI Reduction
+
+  - CDCE(L)913: 1-PLL, 3 Outputs https://www.ti.com/product/cdce913
+  - CDCE(L)925: 2-PLL, 5 Outputs https://www.ti.com/product/cdce925
+  - CDCE(L)937: 3-PLL, 7 Outputs https://www.ti.com/product/cdce937
+  - CDCE(L)949: 4-PLL, 9 Outputs https://www.ti.com/product/cdce949
+
+properties:
+  compatible:
+    enum:
+      - ti,cdce913
+      - ti,cdce925
+      - ti,cdce937
+      - ti,cdce949
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: fixed parent clock
+
+  "#clock-cells":
+    const: 1
+
+  vdd-supply:
+    description: Regulator that provides 1.8V Vdd power supply
+
+  vddout-supply:
+    description: |
+      Regulator that provides Vddout power supply.
+      non-L variant: 2.5V or 3.3V for
+      L variant: 1.8V for
+
+  xtal-load-pf:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Crystal load-capacitor value to fine-tune performance on a
+      board, or to compensate for external influences.
+
+patternProperties:
+  "^PLL[1-4]$":
+    type: object
+    description: |
+      optional child node can be used to specify spread
+      spectrum clocking parameters for a board
+
+    additionalProperties: false
+
+    properties:
+      spread-spectrum:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: SSC mode as defined in the data sheet
+
+      spread-spectrum-center:
+        type: boolean
+        description: |
+          Use "centered" mode instead of "max" mode. When
+          present, the clock runs at the requested frequency on average.
+          Otherwise the requested frequency is the maximum value of the
+          SCC range.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cdce925: clock-controller@64 {
+            compatible = "ti,cdce925";
+            reg = <0x64>;
+            clocks = <&xtal_27Mhz>;
+            #clock-cells = <1>;
+            xtal-load-pf = <5>;
+            vdd-supply = <&reg_1v8>;
+            vddout-supply = <&reg_3v3>;
+            /* PLL options to get SSC 1% centered */
+            PLL2 {
+                spread-spectrum = <4>;
+                spread-spectrum-center;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
index bd8173848253..13d7b3d03d84 100644
--- a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/ti,lmk04832.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Clock bindings for the Texas Instruments LMK04832
+title: Texas Instruments LMK04832 Clock Controller
 
 maintainers:
   - Liam Beguin <liambeguin@gmail.com>
@@ -160,7 +160,7 @@ examples:
         };
     };
 
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
index 0e370289a053..63d976341696 100644
--- a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/clock/ti,sci-clk.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI-SCI clock controller node bindings
+title: TI-SCI clock controller
 
 maintainers:
   - Nishanth Menon <nm@ti.com>
diff --git a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
index 18af6b9409e3..d20db7974a38 100644
--- a/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
+++ b/Documentation/devicetree/bindings/clock/ti-clkctrl.txt
@@ -21,6 +21,7 @@ Required properties :
 	       "ti,clkctrl-l4-per"
 	       "ti,clkctrl-l4-secure"
 	       "ti,clkctrl-l4-wkup"
+- clock-output-names : from common clock binding
 - #clock-cells : shall contain 2 with the first entry being the instance
 		 offset from the clock domain base and the second being the
 		 clock index
@@ -32,7 +33,8 @@ Example: Clock controller node on omap 4430:
 	l4per: cm@1400 {
 		cm_l4per@0 {
 			cm_l4per_clkctrl: clock@20 {
-				compatible = "ti,clkctrl-l4-per", "ti,clkctrl";
+				compatible = "ti,clkctrl";
+				clock-output-names = "l4_per";
 				reg = <0x20 0x1b0>;
 				#clock-cells = <2>;
 			};
diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
index cb76b3f2b341..9c6199249ce5 100644
--- a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
+++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
@@ -17,6 +17,9 @@ Required properties:
 - #clock-cells : from common clock binding; shall be set to 0.
 - clocks : link phandles of clocks within this domain
 
+Optional properties:
+- clock-output-names : from common clock binding.
+
 Examples:
 	dss_clkdm: dss_clkdm {
 		compatible = "ti,clockdomain";
diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt
index 5f43c4706b09..33ac7c9ad053 100644
--- a/Documentation/devicetree/bindings/clock/ti/composite.txt
+++ b/Documentation/devicetree/bindings/clock/ti/composite.txt
@@ -27,6 +27,9 @@ Required properties:
 - clocks : link phandles of component clocks
 - #clock-cells : from common clock binding; shall be set to 0.
 
+Optional properties:
+- clock-output-names : from common clock binding.
+
 Examples:
 
 usb_l4_gate_ick: usb_l4_gate_ick {
diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
index 36998e184821..c9894538315b 100644
--- a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
+++ b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
@@ -15,7 +15,7 @@ Required properties:
 	- for "ti,da850-pll1", shall be "clksrc"
 
 Optional properties:
-- ti,clkmode-square-wave: Indicates that the the board is supplying a square
+- ti,clkmode-square-wave: Indicates that the board is supplying a square
 	wave input on the OSCIN pin instead of using a crystal oscillator.
 	This property is only valid when compatible = "ti,da850-pll0".
 
diff --git a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
index 21c002d28b9b..68504079f99f 100644
--- a/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
+++ b/Documentation/devicetree/bindings/clock/ti/dra7-atl.txt
@@ -6,7 +6,7 @@ functional clock but can be configured to provide different clocks.
 ATL can maintain a clock averages to some desired frequency based on the bws/aws
 signals - can compensate the drift between the two ws signal.
 
-In order to provide the support for ATL and it's output clocks (which can be used
+In order to provide the support for ATL and its output clocks (which can be used
 internally within the SoC or external components) two sets of bindings is needed:
 
 Clock tree binding:
diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
index 662b36d53bf0..518e3c142276 100644
--- a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
+++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt
@@ -16,6 +16,7 @@ Required properties:
 - clocks: parent clock.
 
 Optional properties:
+- clock-output-names : from common clock binding.
 - ti,autoidle-shift: bit shift of the autoidle enable bit for the clock,
   see [2]
 - reg: offset for the autoidle register of this clock, see [2]
diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
index 56d603c1f716..4982615c01b9 100644
--- a/Documentation/devicetree/bindings/clock/ti/gate.txt
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for
 that is used.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
 [3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
 
 Required properties:
@@ -36,6 +36,7 @@ Required properties:
 	ti,clkdm-gate-clock type
 
 Optional properties:
+- clock-output-names : from common clock binding.
 - ti,bit-shift : bit shift for programming the clock gate, invalid for
 		 ti,clkdm-gate-clock type
 - ti,set-bit-to-disable : inverts default gate programming. Setting the bit
diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
index 3f4704040140..d3eb5ca92a7f 100644
--- a/Documentation/devicetree/bindings/clock/ti/interface.txt
+++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate
 clock) and hardware autoidle enable / disable.
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.yaml
 
 Required properties:
 - compatible : shall be one of:
@@ -28,6 +28,7 @@ Required properties:
 - reg : base address for the control register
 
 Optional properties:
+- clock-output-names : from common clock binding.
 - ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0)
 
 Examples:
diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt
index eec8994b9be8..e17425a58621 100644
--- a/Documentation/devicetree/bindings/clock/ti/mux.txt
+++ b/Documentation/devicetree/bindings/clock/ti/mux.txt
@@ -42,6 +42,7 @@ Required properties:
 - reg : register offset for register controlling adjustable mux
 
 Optional properties:
+- clock-output-names : from common clock binding.
 - ti,bit-shift : number of bits to shift the bit-mask, defaults to
   0 if not present
 - ti,index-starts-at-one : valid input select programming starts at 1, not
diff --git a/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml b/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml
new file mode 100644
index 000000000000..d525f96cf244
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/ti,clksel.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/ti,clksel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI clksel clock
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description: |
+  The TI CLKSEL clocks consist of consist of input clock mux bits, and in some
+  cases also has divider, multiplier and gate bits.
+
+properties:
+  compatible:
+    const: ti,clksel
+
+  reg:
+    maxItems: 1
+    description: The CLKSEL register range
+
+  '#address-cells':
+    enum: [ 0, 1, 2 ]
+
+  '#size-cells':
+    enum: [ 0, 1, 2 ]
+
+  ranges: true
+
+  "#clock-cells":
+    const: 2
+    description: The CLKSEL register and bit offset
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    clksel_gfx_fclk: clock@52c {
+      compatible = "ti,clksel";
+      reg = <0x25c 0x4>;
+      #clock-cells = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml
new file mode 100644
index 000000000000..d36558aa39f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pipllct.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pipllct.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 TMPV770X PLL Controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshia Visconti5 PLL controller which supports the PLLs on TMPV770X.
+
+properties:
+  compatible:
+    const: toshiba,tmpv7708-pipllct
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    description: External reference clock (OSC2)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+
+    osc2_clk: osc2-clk {
+      compatible = "fixed-clock";
+      clock-frequency = <20000000>;
+      #clock-cells = <0>;
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pipllct: clock-controller@24220000 {
+            compatible = "toshiba,tmpv7708-pipllct";
+            reg = <0 0x24220000 0 0x820>;
+            #clock-cells = <1>;
+            clocks = <&osc2_clk>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml
new file mode 100644
index 000000000000..081f85b1eb88
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/toshiba,tmpv770x-pismu.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/toshiba,tmpv770x-pismu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 TMPV770x SMU controller
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+  Toshia Visconti5 SMU (System Management Unit) which supports the clock
+  and resets on TMPV770x.
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,tmpv7708-pismu
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pismu: syscon@24200000 {
+            compatible = "toshiba,tmpv7708-pismu", "syscon";
+            reg = <0 0x24200000 0 0x2140>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/ux500.txt b/Documentation/devicetree/bindings/clock/ux500.txt
deleted file mode 100644
index e52bd4b72348..000000000000
--- a/Documentation/devicetree/bindings/clock/ux500.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Clock bindings for ST-Ericsson Ux500 clocks
-
-Required properties :
-- compatible : shall contain only one of the following:
-  "stericsson,u8500-clks"
-  "stericsson,u8540-clks"
-  "stericsson,u9540-clks"
-- reg : shall contain base register location and length for
-  CLKRST1, 2, 3, 5, and 6 in an array. Note the absence of
-  CLKRST4, which does not exist.
-
-Required subnodes:
-- prcmu-clock: a subnode with one clock cell for PRCMU (power,
-  reset, control unit) clocks. The cell indicates which PRCMU
-  clock in the prcmu-clock node the consumer wants to use.
-- prcc-periph-clock: a subnode with two clock cells for
-  PRCC (programmable reset- and clock controller) peripheral clocks.
-  The first cell indicates which PRCC block the consumer
-  wants to use, possible values are 1, 2, 3, 5, 6. The second
-  cell indicates which clock inside the PRCC block it wants,
-  possible values are 0 thru 31.
-- prcc-kernel-clock: a subnode with two clock cells for
-  PRCC (programmable reset- and clock controller) kernel clocks
-  The first cell indicates which PRCC block the consumer
-  wants to use, possible values are 1, 2, 3, 5, 6. The second
-  cell indicates which clock inside the PRCC block it wants,
-  possible values are 0 thru 31.
-- rtc32k-clock: a subnode with zero clock cells for the 32kHz
-  RTC clock.
-- smp-twd-clock: a subnode for the ARM SMP Timer Watchdog cluster
-  with zero clock cells.
-
-Example:
-
-clocks {
-	compatible = "stericsson,u8500-clks";
-	/*
-	 * Registers for the CLKRST block on peripheral
-	 * groups 1, 2, 3, 5, 6,
-	 */
-	reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
-	    <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
-	    <0xa03cf000 0x1000>;
-
-	prcmu_clk: prcmu-clock {
-		#clock-cells = <1>;
-	};
-
-	prcc_pclk: prcc-periph-clock {
-		#clock-cells = <2>;
-	};
-
-	prcc_kclk: prcc-kernel-clock {
-		#clock-cells = <2>;
-	};
-
-	rtc_clk: rtc32k-clock {
-		#clock-cells = <0>;
-	};
-
-	smp_twd_clk: smp-twd-clock {
-		#clock-cells = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
new file mode 100644
index 000000000000..c1f04830a832
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/xlnx,clocking-wizard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx clocking wizard
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
+
+description:
+  The clocking wizard is a soft ip clocking block of Xilinx versal. It
+  reads required input clock frequencies from the devicetree and acts as clock
+  clock output.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,clocking-wizard
+      - xlnx,clocking-wizard-v5.2
+      - xlnx,clocking-wizard-v6.0
+
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: clock input
+      - description: axi clock
+
+  clock-names:
+    items:
+      - const: clk_in1
+      - const: s_axi_aclk
+
+
+  xlnx,speed-grade:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3]
+    description:
+      Speed grade of the device. Higher the speed grade faster is the FPGA device.
+
+  xlnx,nr-outputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8
+    description:
+      Number of outputs.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - clocks
+  - clock-names
+  - xlnx,speed-grade
+  - xlnx,nr-outputs
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller@b0000000  {
+        compatible = "xlnx,clocking-wizard";
+        reg = <0xb0000000 0x10000>;
+        #clock-cells = <1>;
+        xlnx,speed-grade = <1>;
+        xlnx,nr-outputs = <6>;
+        clock-names = "clk_in1", "s_axi_aclk";
+        clocks = <&clkc 15>, <&clkc 15>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index 7eb8659fa610..ae515651fc6b 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -104,8 +104,7 @@ properties:
       - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB
         Type-C Cable and Connector specification, when Power Delivery is not
         supported.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/string
+    $ref: /schemas/types.yaml#/definitions/string
     enum:
       - default
       - 1.5A
@@ -264,11 +263,11 @@ examples:
   # Micro-USB connector with HS lines routed via controller (MUIC).
   - |
     muic-max77843 {
-      usb_con1: connector {
-        compatible = "usb-b-connector";
-        label = "micro-USB";
-        type = "micro";
-      };
+        usb_con1: connector {
+            compatible = "usb-b-connector";
+            label = "micro-USB";
+            type = "micro";
+        };
     };
 
   # USB-C connector attached to CC controller (s2mm005), HS lines routed
@@ -276,34 +275,34 @@ examples:
   # DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
   - |
     ccic: s2mm005 {
-      usb_con2: connector {
-        compatible = "usb-c-connector";
-        label = "USB-C";
+        usb_con2: connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
 
-        ports {
-          #address-cells = <1>;
-          #size-cells = <0>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-          port@0 {
-            reg = <0>;
-            usb_con_hs: endpoint {
-              remote-endpoint = <&max77865_usbc_hs>;
-            };
-          };
-          port@1 {
-            reg = <1>;
-            usb_con_ss: endpoint {
-              remote-endpoint = <&usbdrd_phy_ss>;
-            };
-          };
-          port@2 {
-            reg = <2>;
-            usb_con_sbu: endpoint {
-              remote-endpoint = <&dp_aux>;
+                port@0 {
+                    reg = <0>;
+                    usb_con_hs: endpoint {
+                        remote-endpoint = <&max77865_usbc_hs>;
+                    };
+                };
+                port@1 {
+                    reg = <1>;
+                    usb_con_ss: endpoint {
+                        remote-endpoint = <&usbdrd_phy_ss>;
+                    };
+                };
+                port@2 {
+                    reg = <2>;
+                    usb_con_sbu: endpoint {
+                        remote-endpoint = <&dp_aux>;
+                    };
+                };
             };
-          };
         };
-      };
     };
 
   # USB-C connector attached to a typec port controller(ptn5110), which has
@@ -311,16 +310,16 @@ examples:
   - |
     #include <dt-bindings/usb/pd.h>
     typec: ptn5110 {
-      usb_con3: connector {
-        compatible = "usb-c-connector";
-        label = "USB-C";
-        power-role = "dual";
-        try-power-role = "sink";
-        source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
-        sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
-                     PDO_VAR(5000, 12000, 2000)>;
-        op-sink-microwatt = <10000000>;
-      };
+        usb_con3: connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            power-role = "dual";
+            try-power-role = "sink";
+            source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
+            sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)
+                         PDO_VAR(5000, 12000, 2000)>;
+            op-sink-microwatt = <10000000>;
+        };
     };
 
   # USB-C connector attached to SoC and USB3 typec port controller(hd3ss3220)
@@ -333,20 +332,20 @@ examples:
         data-role = "dual";
 
         ports {
-                #address-cells = <1>;
-                #size-cells = <0>;
-                port@0 {
-                        reg = <0>;
-                        hs_ep: endpoint {
-                                remote-endpoint = <&usb3_hs_ep>;
-                        };
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                hs_ep: endpoint {
+                    remote-endpoint = <&usb3_hs_ep>;
                 };
-                port@1 {
-                        reg = <1>;
-                        ss_ep: endpoint {
-                                remote-endpoint = <&hd3ss3220_in_ep>;
-                        };
+            };
+            port@1 {
+                reg = <1>;
+                ss_ep: endpoint {
+                    remote-endpoint = <&hd3ss3220_in_ep>;
                 };
+            };
         };
     };
 
@@ -355,12 +354,12 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
 
     usb {
-      connector {
-        compatible = "gpio-usb-b-connector", "usb-b-connector";
-        type = "micro";
-        id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
-        vbus-supply = <&usb_p0_vbus>;
-      };
+        connector {
+            compatible = "gpio-usb-b-connector", "usb-b-connector";
+            type = "micro";
+            id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
+            vbus-supply = <&usb_p0_vbus>;
+        };
     };
 
   # Micro-USB connector with HS lines routed via controller (MUIC) and MHL
@@ -368,27 +367,27 @@ examples:
   # mobile phone
   - |
     muic-max77843 {
-      usb_con4: connector {
-        compatible = "samsung,usb-connector-11pin", "usb-b-connector";
-        label = "micro-USB";
-        type = "micro";
+        usb_con4: connector {
+            compatible = "samsung,usb-connector-11pin", "usb-b-connector";
+            label = "micro-USB";
+            type = "micro";
 
-        ports {
-          #address-cells = <1>;
-          #size-cells = <0>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-          port@0 {
-            reg = <0>;
-            muic_to_usb: endpoint {
-              remote-endpoint = <&usb_to_muic>;
-            };
-          };
-          port@3 {
-            reg = <3>;
-            usb_con_mhl: endpoint {
-              remote-endpoint = <&sii8620_mhl>;
+                port@0 {
+                    reg = <0>;
+                    muic_to_usb: endpoint {
+                        remote-endpoint = <&usb_to_muic>;
+                    };
+                };
+                port@3 {
+                    reg = <3>;
+                    usb_con_mhl: endpoint {
+                        remote-endpoint = <&sii8620_mhl>;
+                    };
+                };
             };
-          };
         };
-      };
     };
diff --git a/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
new file mode 100644
index 000000000000..4e0b2d2b303e
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/ti,am62-ecap-capture.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/ti,am62-ecap-capture.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Enhanced Capture (eCAP) Module
+
+maintainers:
+  - Julien Panis <jpanis@baylibre.com>
+
+description: |
+  The eCAP module resources can be used to capture timestamps
+  on input signal events (falling/rising edges).
+
+properties:
+  compatible:
+    const: ti,am62-ecap-capture
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        capture@23100000 { /* eCAP in capture mode on am62x */
+            compatible = "ti,am62-ecap-capture";
+            reg = <0x00 0x23100000 0x00 0x100>;
+            interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
+            power-domains = <&k3_pds 51 TI_SCI_PD_EXCLUSIVE>;
+            clocks = <&k3_clks 51 0>;
+            clock-names = "fck";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/arm/cpu-capacity.txt b/Documentation/devicetree/bindings/cpu/cpu-capacity.txt
index 380e21c5fc7e..f28e1adad428 100644
--- a/Documentation/devicetree/bindings/arm/cpu-capacity.txt
+++ b/Documentation/devicetree/bindings/cpu/cpu-capacity.txt
@@ -1,12 +1,12 @@
 ==========================================
-ARM CPUs capacity bindings
+CPU capacity bindings
 ==========================================
 
 ==========================================
 1 - Introduction
 ==========================================
 
-ARM systems may be configured to have cpus with different power/performance
+Some systems may be configured to have cpus with different power/performance
 characteristics within the same chip. In this case, additional information has
 to be made available to the kernel for it to be aware of such differences and
 take decisions accordingly.
@@ -62,8 +62,8 @@ Example 1 (ARM 64-bit, 6-cpu system, two clusters):
 The capacities-dmips-mhz or DMIPS/MHz values (scaled to 1024)
 are 1024 and 578 for cluster0 and cluster1. Further normalization
 is done by the operating system based on cluster0@max-freq=1100 and
-custer1@max-freq=850, final capacities are 1024 for cluster0 and
-446 for cluster1 (576*850/1100).
+cluster1@max-freq=850, final capacities are 1024 for cluster0 and
+446 for cluster1 (578*850/1100).
 
 cpus {
 	#address-cells = <2>;
diff --git a/Documentation/devicetree/bindings/cpu/idle-states.yaml b/Documentation/devicetree/bindings/cpu/idle-states.yaml
new file mode 100644
index 000000000000..b8cc826c9501
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpu/idle-states.yaml
@@ -0,0 +1,855 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpu/idle-states.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Idle states
+
+maintainers:
+  - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+  - Anup Patel <anup@brainfault.org>
+
+description: |+
+  ==========================================
+  1 - Introduction
+  ==========================================
+
+  ARM and RISC-V systems contain HW capable of managing power consumption
+  dynamically, where cores can be put in different low-power states (ranging
+  from simple wfi to power gating) according to OS PM policies. The CPU states
+  representing the range of dynamic idle states that a processor can enter at
+  run-time, can be specified through device tree bindings representing the
+  parameters required to enter/exit specific idle states on a given processor.
+
+  ==========================================
+  2 - ARM idle states
+  ==========================================
+
+  According to the Server Base System Architecture document (SBSA, [3]), the
+  power states an ARM CPU can be put into are identified by the following list:
+
+  - Running
+  - Idle_standby
+  - Idle_retention
+  - Sleep
+  - Off
+
+  The power states described in the SBSA document define the basic CPU states on
+  top of which ARM platforms implement power management schemes that allow an OS
+  PM implementation to put the processor in different idle states (which include
+  states listed above; "off" state is not an idle state since it does not have
+  wake-up capabilities, hence it is not considered in this document).
+
+  Idle state parameters (e.g. entry latency) are platform specific and need to
+  be characterized with bindings that provide the required information to OS PM
+  code so that it can build the required tables and use them at runtime.
+
+  The device tree binding definition for ARM idle states is the subject of this
+  document.
+
+  ==========================================
+  3 - RISC-V idle states
+  ==========================================
+
+  On RISC-V systems, the HARTs (or CPUs) [6] can be put in platform specific
+  suspend (or idle) states (ranging from simple WFI, power gating, etc). The
+  RISC-V SBI v0.3 (or higher) [7] hart state management extension provides a
+  standard mechanism for OS to request HART state transitions.
+
+  The platform specific suspend (or idle) states of a hart can be either
+  retentive or non-rententive in nature. A retentive suspend state will
+  preserve HART registers and CSR values for all privilege modes whereas
+  a non-retentive suspend state will not preserve HART registers and CSR
+  values.
+
+  ===========================================
+  4 - idle-states definitions
+  ===========================================
+
+  Idle states are characterized for a specific system through a set of
+  timing and energy related properties, that underline the HW behaviour
+  triggered upon idle states entry and exit.
+
+  The following diagram depicts the CPU execution phases and related timing
+  properties required to enter and exit an idle state:
+
+  ..__[EXEC]__|__[PREP]__|__[ENTRY]__|__[IDLE]__|__[EXIT]__|__[EXEC]__..
+              |          |           |          |          |
+
+              |<------ entry ------->|
+              |       latency        |
+                                                |<- exit ->|
+                                                |  latency |
+              |<-------- min-residency -------->|
+                         |<-------  wakeup-latency ------->|
+
+      Diagram 1: CPU idle state execution phases
+
+  EXEC:  Normal CPU execution.
+
+  PREP:  Preparation phase before committing the hardware to idle mode
+    like cache flushing. This is abortable on pending wake-up
+    event conditions. The abort latency is assumed to be negligible
+    (i.e. less than the ENTRY + EXIT duration). If aborted, CPU
+    goes back to EXEC. This phase is optional. If not abortable,
+    this should be included in the ENTRY phase instead.
+
+  ENTRY:  The hardware is committed to idle mode. This period must run
+    to completion up to IDLE before anything else can happen.
+
+  IDLE:  This is the actual energy-saving idle period. This may last
+    between 0 and infinite time, until a wake-up event occurs.
+
+  EXIT:  Period during which the CPU is brought back to operational
+    mode (EXEC).
+
+  entry-latency: Worst case latency required to enter the idle state. The
+  exit-latency may be guaranteed only after entry-latency has passed.
+
+  min-residency: Minimum period, including preparation and entry, for a given
+  idle state to be worthwhile energywise.
+
+  wakeup-latency: Maximum delay between the signaling of a wake-up event and the
+  CPU being able to execute normal code again. If not specified, this is assumed
+  to be entry-latency + exit-latency.
+
+  These timing parameters can be used by an OS in different circumstances.
+
+  An idle CPU requires the expected min-residency time to select the most
+  appropriate idle state based on the expected expiry time of the next IRQ
+  (i.e. wake-up) that causes the CPU to return to the EXEC phase.
+
+  An operating system scheduler may need to compute the shortest wake-up delay
+  for CPUs in the system by detecting how long will it take to get a CPU out
+  of an idle state, e.g.:
+
+  wakeup-delay = exit-latency + max(entry-latency - (now - entry-timestamp), 0)
+
+  In other words, the scheduler can make its scheduling decision by selecting
+  (e.g. waking-up) the CPU with the shortest wake-up delay.
+  The wake-up delay must take into account the entry latency if that period
+  has not expired. The abortable nature of the PREP period can be ignored
+  if it cannot be relied upon (e.g. the PREP deadline may occur much sooner than
+  the worst case since it depends on the CPU operating conditions, i.e. caches
+  state).
+
+  An OS has to reliably probe the wakeup-latency since some devices can enforce
+  latency constraint guarantees to work properly, so the OS has to detect the
+  worst case wake-up latency it can incur if a CPU is allowed to enter an
+  idle state, and possibly to prevent that to guarantee reliable device
+  functioning.
+
+  The min-residency time parameter deserves further explanation since it is
+  expressed in time units but must factor in energy consumption coefficients.
+
+  The energy consumption of a cpu when it enters a power state can be roughly
+  characterised by the following graph:
+
+                 |
+                 |
+                 |
+             e   |
+             n   |                                      /---
+             e   |                               /------
+             r   |                        /------
+             g   |                  /-----
+             y   |           /------
+                 |       ----
+                 |      /|
+                 |     / |
+                 |    /  |
+                 |   /   |
+                 |  /    |
+                 | /     |
+                 |/      |
+            -----|-------+----------------------------------
+                0|       1                              time(ms)
+
+      Graph 1: Energy vs time example
+
+  The graph is split in two parts delimited by time 1ms on the X-axis.
+  The graph curve with X-axis values = { x | 0 < x < 1ms } has a steep slope
+  and denotes the energy costs incurred while entering and leaving the idle
+  state.
+  The graph curve in the area delimited by X-axis values = {x | x > 1ms } has
+  shallower slope and essentially represents the energy consumption of the idle
+  state.
+
+  min-residency is defined for a given idle state as the minimum expected
+  residency time for a state (inclusive of preparation and entry) after
+  which choosing that state become the most energy efficient option. A good
+  way to visualise this, is by taking the same graph above and comparing some
+  states energy consumptions plots.
+
+  For sake of simplicity, let's consider a system with two idle states IDLE1,
+  and IDLE2:
+
+            |
+            |
+            |
+            |                                                  /-- IDLE1
+         e  |                                              /---
+         n  |                                         /----
+         e  |                                     /---
+         r  |                                /-----/--------- IDLE2
+         g  |                    /-------/---------
+         y  |        ------------    /---|
+            |       /           /----    |
+            |      /        /---         |
+            |     /    /----             |
+            |    / /---                  |
+            |   ---                      |
+            |  /                         |
+            | /                          |
+            |/                           |                  time
+         ---/----------------------------+------------------------
+            |IDLE1-energy < IDLE2-energy | IDLE2-energy < IDLE1-energy
+                                         |
+                                  IDLE2-min-residency
+
+      Graph 2: idle states min-residency example
+
+  In graph 2 above, that takes into account idle states entry/exit energy
+  costs, it is clear that if the idle state residency time (i.e. time till next
+  wake-up IRQ) is less than IDLE2-min-residency, IDLE1 is the better idle state
+  choice energywise.
+
+  This is mainly down to the fact that IDLE1 entry/exit energy costs are lower
+  than IDLE2.
+
+  However, the lower power consumption (i.e. shallower energy curve slope) of
+  idle state IDLE2 implies that after a suitable time, IDLE2 becomes more energy
+  efficient.
+
+  The time at which IDLE2 becomes more energy efficient than IDLE1 (and other
+  shallower states in a system with multiple idle states) is defined
+  IDLE2-min-residency and corresponds to the time when energy consumption of
+  IDLE1 and IDLE2 states breaks even.
+
+  The definitions provided in this section underpin the idle states
+  properties specification that is the subject of the following sections.
+
+  ===========================================
+  5 - idle-states node
+  ===========================================
+
+  The processor idle states are defined within the idle-states node, which is
+  a direct child of the cpus node [1] and provides a container where the
+  processor idle states, defined as device tree nodes, are listed.
+
+  On ARM systems, it is a container of processor idle states nodes. If the
+  system does not provide CPU power management capabilities, or the processor
+  just supports idle_standby, an idle-states node is not required.
+
+  ===========================================
+  6 - References
+  ===========================================
+
+  [1] ARM Linux Kernel documentation - CPUs bindings
+      Documentation/devicetree/bindings/arm/cpus.yaml
+
+  [2] ARM Linux Kernel documentation - PSCI bindings
+      Documentation/devicetree/bindings/arm/psci.yaml
+
+  [3] ARM Server Base System Architecture (SBSA)
+      http://infocenter.arm.com/help/index.jsp
+
+  [4] ARM Architecture Reference Manuals
+      http://infocenter.arm.com/help/index.jsp
+
+  [5] ARM Linux Kernel documentation - Booting AArch64 Linux
+      Documentation/arm64/booting.rst
+
+  [6] RISC-V Linux Kernel documentation - CPUs bindings
+      Documentation/devicetree/bindings/riscv/cpus.yaml
+
+  [7] RISC-V Supervisor Binary Interface (SBI)
+      http://github.com/riscv/riscv-sbi-doc/riscv-sbi.adoc
+
+properties:
+  $nodename:
+    const: idle-states
+
+  entry-method:
+    description: |
+      Usage and definition depend on ARM architecture version.
+
+      On ARM v8 64-bit this property is required.
+      On ARM 32-bit systems this property is optional
+
+      This assumes that the "enable-method" property is set to "psci" in the cpu
+      node[5] that is responsible for setting up CPU idle management in the OS
+      implementation.
+    const: psci
+
+patternProperties:
+  "^(cpu|cluster)-":
+    type: object
+    description: |
+      Each state node represents an idle state description and must be defined
+      as follows.
+
+      The idle state entered by executing the wfi instruction (idle_standby
+      SBSA,[3][4]) is considered standard on all ARM and RISC-V platforms and
+      therefore must not be listed.
+
+      In addition to the properties listed above, a state node may require
+      additional properties specific to the entry-method defined in the
+      idle-states node. Please refer to the entry-method bindings
+      documentation for properties definitions.
+
+    properties:
+      compatible:
+        enum:
+          - arm,idle-state
+          - riscv,idle-state
+
+      arm,psci-suspend-param:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          power_state parameter to pass to the ARM PSCI suspend call.
+
+          Device tree nodes that require usage of PSCI CPU_SUSPEND function
+          (i.e. idle states node with entry-method property is set to "psci")
+          must specify this property.
+
+      riscv,sbi-suspend-param:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          suspend_type parameter to pass to the RISC-V SBI HSM suspend call.
+
+          This property is required in idle state nodes of device tree meant
+          for RISC-V systems. For more details on the suspend_type parameter
+          refer the SBI specifiation v0.3 (or higher) [7].
+
+      local-timer-stop:
+        description:
+          If present the CPU local timer control logic is
+             lost on state entry, otherwise it is retained.
+        type: boolean
+
+      entry-latency-us:
+        description:
+          Worst case latency in microseconds required to enter the idle state.
+
+      exit-latency-us:
+        description:
+          Worst case latency in microseconds required to exit the idle state.
+          The exit-latency-us duration may be guaranteed only after
+          entry-latency-us has passed.
+
+      min-residency-us:
+        description:
+          Minimum residency duration in microseconds, inclusive of preparation
+          and entry, for this idle state to be considered worthwhile energy wise
+          (refer to section 2 of this document for a complete description).
+
+      wakeup-latency-us:
+        description: |
+          Maximum delay between the signaling of a wake-up event and the CPU
+          being able to execute normal code again. If omitted, this is assumed
+          to be equal to:
+
+            entry-latency-us + exit-latency-us
+
+          It is important to supply this value on systems where the duration of
+          PREP phase (see diagram 1, section 2) is non-neglibigle. In such
+          systems entry-latency-us + exit-latency-us will exceed
+          wakeup-latency-us by this duration.
+
+      idle-state-name:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          A string used as a descriptive name for the idle state.
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - entry-latency-us
+      - exit-latency-us
+      - min-residency-us
+
+additionalProperties: false
+
+examples:
+  - |
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <2>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x0>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@1 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x1>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10000 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10000>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10001 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10001>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@10101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a57";
+            reg = <0x0 0x10101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_0_0>, <&CPU_SLEEP_0_0>,
+                    <&CLUSTER_RETENTION_0>, <&CLUSTER_SLEEP_0>;
+        };
+
+        cpu@100000000 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x0>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100000001 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x1>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100000100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100000101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010000 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10000>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010001 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10001>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10100>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        cpu@100010101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a53";
+            reg = <0x1 0x10101>;
+            enable-method = "psci";
+            cpu-idle-states = <&CPU_RETENTION_1_0>, <&CPU_SLEEP_1_0>,
+                    <&CLUSTER_RETENTION_1>, <&CLUSTER_SLEEP_1>;
+        };
+
+        idle-states {
+            entry-method = "psci";
+
+            CPU_RETENTION_0_0: cpu-retention-0-0 {
+                compatible = "arm,idle-state";
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <80>;
+            };
+
+            CLUSTER_RETENTION_0: cluster-retention-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <250>;
+                wakeup-latency-us = <130>;
+            };
+
+            CPU_SLEEP_0_0: cpu-sleep-0-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <250>;
+                exit-latency-us = <500>;
+                min-residency-us = <950>;
+            };
+
+            CLUSTER_SLEEP_0: cluster-sleep-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <600>;
+                exit-latency-us = <1100>;
+                min-residency-us = <2700>;
+                wakeup-latency-us = <1500>;
+            };
+
+            CPU_RETENTION_1_0: cpu-retention-1-0 {
+                compatible = "arm,idle-state";
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <90>;
+            };
+
+            CLUSTER_RETENTION_1: cluster-retention-1 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <270>;
+                wakeup-latency-us = <100>;
+            };
+
+            CPU_SLEEP_1_0: cpu-sleep-1-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x0010000>;
+                entry-latency-us = <70>;
+                exit-latency-us = <100>;
+                min-residency-us = <300>;
+                wakeup-latency-us = <150>;
+            };
+
+            CLUSTER_SLEEP_1: cluster-sleep-1 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                arm,psci-suspend-param = <0x1010000>;
+                entry-latency-us = <500>;
+                exit-latency-us = <1200>;
+                min-residency-us = <3500>;
+                wakeup-latency-us = <1300>;
+            };
+        };
+    };
+
+  - |
+    // Example 2 (ARM 32-bit, 8-cpu system, two clusters):
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <1>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x0>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@1 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x1>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@2 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x2>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@3 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a15";
+            reg = <0x3>;
+            cpu-idle-states = <&cpu_sleep_0_0>, <&cluster_sleep_0>;
+        };
+
+        cpu@100 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x100>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        cpu@101 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x101>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        cpu@102 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x102>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        cpu@103 {
+            device_type = "cpu";
+            compatible = "arm,cortex-a7";
+            reg = <0x103>;
+            cpu-idle-states = <&cpu_sleep_1_0>, <&cluster_sleep_1>;
+        };
+
+        idle-states {
+            cpu_sleep_0_0: cpu-sleep-0-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <200>;
+                exit-latency-us = <100>;
+                min-residency-us = <400>;
+                wakeup-latency-us = <250>;
+            };
+
+            cluster_sleep_0: cluster-sleep-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <500>;
+                exit-latency-us = <1500>;
+                min-residency-us = <2500>;
+                wakeup-latency-us = <1700>;
+            };
+
+            cpu_sleep_1_0: cpu-sleep-1-0 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <300>;
+                exit-latency-us = <500>;
+                min-residency-us = <900>;
+                wakeup-latency-us = <600>;
+            };
+
+            cluster_sleep_1: cluster-sleep-1 {
+                compatible = "arm,idle-state";
+                local-timer-stop;
+                entry-latency-us = <800>;
+                exit-latency-us = <2000>;
+                min-residency-us = <6500>;
+                wakeup-latency-us = <2300>;
+            };
+        };
+    };
+
+  - |
+    // Example 3 (RISC-V 64-bit, 4-cpu systems, two clusters):
+
+    cpus {
+        #size-cells = <0>;
+        #address-cells = <1>;
+
+        cpu@0 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x0>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_0_0>, <&CPU_NONRET_0_0>,
+                            <&CLUSTER_RET_0>, <&CLUSTER_NONRET_0>;
+
+            cpu_intc0: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        cpu@1 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x1>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_0_0>, <&CPU_NONRET_0_0>,
+                            <&CLUSTER_RET_0>, <&CLUSTER_NONRET_0>;
+
+            cpu_intc1: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        cpu@10 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x10>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_1_0>, <&CPU_NONRET_1_0>,
+                            <&CLUSTER_RET_1>, <&CLUSTER_NONRET_1>;
+
+            cpu_intc10: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        cpu@11 {
+            device_type = "cpu";
+            compatible = "riscv";
+            reg = <0x11>;
+            riscv,isa = "rv64imafdc";
+            mmu-type = "riscv,sv48";
+            cpu-idle-states = <&CPU_RET_1_0>, <&CPU_NONRET_1_0>,
+                            <&CLUSTER_RET_1>, <&CLUSTER_NONRET_1>;
+
+            cpu_intc11: interrupt-controller {
+                #interrupt-cells = <1>;
+                compatible = "riscv,cpu-intc";
+                interrupt-controller;
+            };
+        };
+
+        idle-states {
+            CPU_RET_0_0: cpu-retentive-0-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x10000000>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <80>;
+            };
+
+            CPU_NONRET_0_0: cpu-nonretentive-0-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x90000000>;
+                entry-latency-us = <250>;
+                exit-latency-us = <500>;
+                min-residency-us = <950>;
+            };
+
+            CLUSTER_RET_0: cluster-retentive-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x11000000>;
+                local-timer-stop;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <250>;
+                wakeup-latency-us = <130>;
+            };
+
+            CLUSTER_NONRET_0: cluster-nonretentive-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x91000000>;
+                local-timer-stop;
+                entry-latency-us = <600>;
+                exit-latency-us = <1100>;
+                min-residency-us = <2700>;
+                wakeup-latency-us = <1500>;
+            };
+
+            CPU_RET_1_0: cpu-retentive-1-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x10000010>;
+                entry-latency-us = <20>;
+                exit-latency-us = <40>;
+                min-residency-us = <80>;
+            };
+
+            CPU_NONRET_1_0: cpu-nonretentive-1-0 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x90000010>;
+                entry-latency-us = <250>;
+                exit-latency-us = <500>;
+                min-residency-us = <950>;
+            };
+
+            CLUSTER_RET_1: cluster-retentive-1 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x11000010>;
+                local-timer-stop;
+                entry-latency-us = <50>;
+                exit-latency-us = <100>;
+                min-residency-us = <250>;
+                wakeup-latency-us = <130>;
+            };
+
+            CLUSTER_NONRET_1: cluster-nonretentive-1 {
+                compatible = "riscv,idle-state";
+                riscv,sbi-suspend-param = <0x91000010>;
+                local-timer-stop;
+                entry-latency-us = <600>;
+                exit-latency-us = <1100>;
+                min-residency-us = <2700>;
+                wakeup-latency-us = <1500>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml b/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml
new file mode 100644
index 000000000000..76cb9726660e
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/apple,cluster-cpufreq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC cluster cpufreq device
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  Apple SoCs (e.g. M1) have a per-cpu-cluster DVFS controller that is part of
+  the cluster management register block. This binding uses the standard
+  operating-points-v2 table to define the CPU performance states, with the
+  opp-level property specifying the hardware p-state index for that level.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - apple,t8103-cluster-cpufreq
+              - apple,t8112-cluster-cpufreq
+          - const: apple,cluster-cpufreq
+      - items:
+          - const: apple,t6000-cluster-cpufreq
+          - const: apple,t8103-cluster-cpufreq
+          - const: apple,cluster-cpufreq
+
+  reg:
+    maxItems: 1
+
+  '#performance-domain-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - '#performance-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    // This example shows a single CPU per domain and 2 domains,
+    // with two p-states per domain.
+    // Shipping hardware has 2-4 CPUs per domain and 2-6 domains.
+    cpus {
+      #address-cells = <2>;
+      #size-cells = <0>;
+
+      cpu@0 {
+        compatible = "apple,icestorm";
+        device_type = "cpu";
+        reg = <0x0 0x0>;
+        operating-points-v2 = <&ecluster_opp>;
+        performance-domains = <&cpufreq_e>;
+      };
+
+      cpu@10100 {
+        compatible = "apple,firestorm";
+        device_type = "cpu";
+        reg = <0x0 0x10100>;
+        operating-points-v2 = <&pcluster_opp>;
+        performance-domains = <&cpufreq_p>;
+      };
+    };
+
+    ecluster_opp: opp-table-0 {
+      compatible = "operating-points-v2";
+      opp-shared;
+
+      opp01 {
+        opp-hz = /bits/ 64 <600000000>;
+        opp-level = <1>;
+        clock-latency-ns = <7500>;
+      };
+      opp02 {
+        opp-hz = /bits/ 64 <972000000>;
+        opp-level = <2>;
+        clock-latency-ns = <22000>;
+      };
+    };
+
+    pcluster_opp: opp-table-1 {
+      compatible = "operating-points-v2";
+      opp-shared;
+
+      opp01 {
+        opp-hz = /bits/ 64 <600000000>;
+        opp-level = <1>;
+        clock-latency-ns = <8000>;
+      };
+      opp02 {
+        opp-hz = /bits/ 64 <828000000>;
+        opp-level = <2>;
+        clock-latency-ns = <19000>;
+      };
+    };
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      cpufreq_e: performance-controller@210e20000 {
+        compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+        reg = <0x2 0x10e20000 0 0x1000>;
+        #performance-domain-cells = <0>;
+      };
+
+      cpufreq_p: performance-controller@211e20000 {
+        compatible = "apple,t8103-cluster-cpufreq", "apple,cluster-cpufreq";
+        reg = <0x2 0x11e20000 0 0x1000>;
+        #performance-domain-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
index 73470ecd1f12..ce91a9197697 100644
--- a/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
@@ -16,7 +16,7 @@ has been processed. See [2] for more information on the brcm,l2-intc node.
 firmware. On some SoCs, this firmware supports DFS and DVFS in addition to
 Adaptive Voltage Scaling.
 
-[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
 
 
 Node brcm,avs-cpu-data-mem
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
index 9cd42a64b13e..d0aecde2b89b 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/cpufreq/cpufreq-mediatek-hw.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek's CPUFREQ Bindings
+title: MediaTek's CPUFREQ
 
 maintainers:
   - Hector Yuan <hector.yuan@mediatek.com>
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
index b8233ec91d3d..e0a4ba599abc 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
@@ -20,6 +20,13 @@ Optional properties:
 	       Vsram to fit SoC specific needs. When absent, the voltage scaling
 	       flow is handled by hardware, hence no software "voltage tracking" is
 	       needed.
+- mediatek,cci:
+	Used to confirm the link status between cpufreq and mediatek cci. Because
+	cpufreq and mediatek cci could share the same regulator in some MediaTek SoCs.
+	To prevent the issue of high frequency and low voltage, we need to use this
+	property to make sure mediatek cci is ready.
+	For details of mediatek cci, please refer to
+	Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
 - #cooling-cells:
 	For details, please refer to
 	Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
deleted file mode 100644
index 9299028ee712..000000000000
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.txt
+++ /dev/null
@@ -1,172 +0,0 @@
-Qualcomm Technologies, Inc. CPUFREQ Bindings
-
-CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
-SoCs to manage frequency in hardware. It is capable of controlling frequency
-for multiple clusters.
-
-Properties:
-- compatible
-	Usage:		required
-	Value type:	<string>
-	Definition:	must be "qcom,cpufreq-hw" or "qcom,cpufreq-epss".
-
-- clocks
-	Usage:		required
-	Value type:	<phandle> From common clock binding.
-	Definition:	clock handle for XO clock and GPLL0 clock.
-
-- clock-names
-	Usage:		required
-	Value type:	<string> From common clock binding.
-	Definition:	must be "xo", "alternate".
-
-- reg
-	Usage:		required
-	Value type:	<prop-encoded-array>
-	Definition:	Addresses and sizes for the memory of the HW bases in
-			each frequency domain.
-- reg-names
-	Usage:		Optional
-	Value type:	<string>
-	Definition:	Frequency domain name i.e.
-			"freq-domain0", "freq-domain1".
-
-- #freq-domain-cells:
-	Usage:		required.
-	Definition:	Number of cells in a freqency domain specifier.
-
-* Property qcom,freq-domain
-Devices supporting freq-domain must set their "qcom,freq-domain" property with
-phandle to a cpufreq_hw followed by the Domain ID(0/1) in the CPU DT node.
-
-
-Example:
-
-Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster switch
-DCVS state together.
-
-/ {
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			next-level-cache = <&L2_0>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_0: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-				L3_0: l3-cache {
-				      compatible = "cache";
-				};
-			};
-		};
-
-		CPU1: cpu@100 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x100>;
-			enable-method = "psci";
-			next-level-cache = <&L2_100>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_100: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU2: cpu@200 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x200>;
-			enable-method = "psci";
-			next-level-cache = <&L2_200>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_200: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU3: cpu@300 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x300>;
-			enable-method = "psci";
-			next-level-cache = <&L2_300>;
-			qcom,freq-domain = <&cpufreq_hw 0>;
-			L2_300: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU4: cpu@400 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x400>;
-			enable-method = "psci";
-			next-level-cache = <&L2_400>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_400: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU5: cpu@500 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x500>;
-			enable-method = "psci";
-			next-level-cache = <&L2_500>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_500: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU6: cpu@600 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x600>;
-			enable-method = "psci";
-			next-level-cache = <&L2_600>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_600: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-
-		CPU7: cpu@700 {
-			device_type = "cpu";
-			compatible = "qcom,kryo385";
-			reg = <0x0 0x700>;
-			enable-method = "psci";
-			next-level-cache = <&L2_700>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
-			L2_700: l2-cache {
-				compatible = "cache";
-				next-level-cache = <&L3_0>;
-			};
-		};
-	};
-
- soc {
-	cpufreq_hw: cpufreq@17d43000 {
-		compatible = "qcom,cpufreq-hw";
-		reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
-		reg-names = "freq-domain0", "freq-domain1";
-
-		clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
-		clock-names = "xo", "alternate";
-
-		#freq-domain-cells = <1>;
-	};
-}
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
new file mode 100644
index 000000000000..a6b3bb8fdf33
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
@@ -0,0 +1,362 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/cpufreq-qcom-hw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. CPUFREQ
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+
+  CPUFREQ HW is a hardware engine used by some Qualcomm Technologies, Inc. (QTI)
+  SoCs to manage frequency in hardware. It is capable of controlling frequency
+  for multiple clusters.
+
+properties:
+  compatible:
+    oneOf:
+      - description: v1 of CPUFREQ HW
+        items:
+          - enum:
+              - qcom,qcm2290-cpufreq-hw
+              - qcom,sc7180-cpufreq-hw
+              - qcom,sdm845-cpufreq-hw
+              - qcom,sm6115-cpufreq-hw
+              - qcom,sm6350-cpufreq-hw
+              - qcom,sm8150-cpufreq-hw
+          - const: qcom,cpufreq-hw
+
+      - description: v2 of CPUFREQ HW (EPSS)
+        items:
+          - enum:
+              - qcom,qdu1000-cpufreq-epss
+              - qcom,sa8775p-cpufreq-epss
+              - qcom,sc7280-cpufreq-epss
+              - qcom,sc8280xp-cpufreq-epss
+              - qcom,sm6375-cpufreq-epss
+              - qcom,sm8250-cpufreq-epss
+              - qcom,sm8350-cpufreq-epss
+              - qcom,sm8450-cpufreq-epss
+              - qcom,sm8550-cpufreq-epss
+          - const: qcom,cpufreq-epss
+
+  reg:
+    minItems: 1
+    items:
+      - description: Frequency domain 0 register region
+      - description: Frequency domain 1 register region
+      - description: Frequency domain 2 register region
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: freq-domain0
+      - const: freq-domain1
+      - const: freq-domain2
+
+  clocks:
+    items:
+      - description: XO Clock
+      - description: GPLL0 Clock
+
+  clock-names:
+    items:
+      - const: xo
+      - const: alternate
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: dcvsh-irq-0
+      - const: dcvsh-irq-1
+      - const: dcvsh-irq-2
+
+  '#freq-domain-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#freq-domain-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-cpufreq-hw
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 1
+
+        reg-names:
+          minItems: 1
+          maxItems: 1
+
+        interrupts:
+          minItems: 1
+          maxItems: 1
+
+        interrupt-names:
+          minItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qdu1000-cpufreq-epss
+              - qcom,sc7180-cpufreq-hw
+              - qcom,sc8280xp-cpufreq-epss
+              - qcom,sdm845-cpufreq-hw
+              - qcom,sm6115-cpufreq-hw
+              - qcom,sm6350-cpufreq-hw
+              - qcom,sm6375-cpufreq-epss
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+
+        reg-names:
+          minItems: 2
+          maxItems: 2
+
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-cpufreq-epss
+              - qcom,sm8250-cpufreq-epss
+              - qcom,sm8350-cpufreq-epss
+              - qcom,sm8450-cpufreq-epss
+              - qcom,sm8550-cpufreq-epss
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+
+        reg-names:
+          minItems: 3
+          maxItems: 3
+
+        interrupts:
+          minItems: 3
+          maxItems: 3
+
+        interrupt-names:
+          minItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8150-cpufreq-hw
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+
+        reg-names:
+          minItems: 3
+          maxItems: 3
+
+        # On some SoCs the Prime core shares the LMH irq with Big cores
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 2
+
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    // Example 1: Dual-cluster, Quad-core per cluster. CPUs within a cluster
+    // switch DCVS state together.
+    cpus {
+      #address-cells = <2>;
+      #size-cells = <0>;
+
+      CPU0: cpu@0 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x0>;
+        enable-method = "psci";
+        next-level-cache = <&L2_0>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_0: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+          L3_0: l3-cache {
+            compatible = "cache";
+            cache-unified;
+            cache-level = <3>;
+          };
+        };
+      };
+
+      CPU1: cpu@100 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x100>;
+        enable-method = "psci";
+        next-level-cache = <&L2_100>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_100: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU2: cpu@200 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x200>;
+        enable-method = "psci";
+        next-level-cache = <&L2_200>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_200: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU3: cpu@300 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x300>;
+        enable-method = "psci";
+        next-level-cache = <&L2_300>;
+        qcom,freq-domain = <&cpufreq_hw 0>;
+        clocks = <&cpufreq_hw 0>;
+        L2_300: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU4: cpu@400 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x400>;
+        enable-method = "psci";
+        next-level-cache = <&L2_400>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_400: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU5: cpu@500 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x500>;
+        enable-method = "psci";
+        next-level-cache = <&L2_500>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_500: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU6: cpu@600 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x600>;
+        enable-method = "psci";
+        next-level-cache = <&L2_600>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_600: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+
+      CPU7: cpu@700 {
+        device_type = "cpu";
+        compatible = "qcom,kryo385";
+        reg = <0x0 0x700>;
+        enable-method = "psci";
+        next-level-cache = <&L2_700>;
+        qcom,freq-domain = <&cpufreq_hw 1>;
+        clocks = <&cpufreq_hw 1>;
+        L2_700: l2-cache {
+          compatible = "cache";
+          cache-unified;
+          cache-level = <2>;
+          next-level-cache = <&L3_0>;
+        };
+      };
+    };
+
+    soc {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      cpufreq@17d43000 {
+        compatible = "qcom,sdm845-cpufreq-hw", "qcom,cpufreq-hw";
+        reg = <0x17d43000 0x1400>, <0x17d45800 0x1400>;
+        reg-names = "freq-domain0", "freq-domain1";
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+        clock-names = "xo", "alternate";
+
+        #freq-domain-cells = <1>;
+        #clock-cells = <1>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
new file mode 100644
index 000000000000..6f5e7904181f
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/qcom-cpufreq-nvmem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. NVMEM CPUFreq
+
+maintainers:
+  - Ilia Lin <ilia.lin@kernel.org>
+
+description: |
+  In certain Qualcomm Technologies, Inc. SoCs such as QCS404, The CPU supply
+  voltage is dynamically configured by Core Power Reduction (CPR) depending on
+  current CPU frequency and efuse values.
+  CPR provides a power domain with multiple levels that are selected depending
+  on the CPU OPP in use. The CPUFreq driver sets the CPR power domain level
+  according to the required OPPs defined in the CPU OPP tables.
+
+  For old implementation efuses are parsed to select the correct opp table and
+  voltage and CPR is not supported/used.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,apq8064
+          - qcom,apq8096
+          - qcom,ipq8064
+          - qcom,msm8939
+          - qcom,msm8960
+          - qcom,msm8974
+          - qcom,msm8996
+          - qcom,qcs404
+  required:
+    - compatible
+
+patternProperties:
+  '^opp-table(-[a-z0-9]+)?$':
+    allOf:
+      - if:
+          properties:
+            compatible:
+              const: operating-points-v2-kryo-cpu
+        then:
+          $ref: /schemas/opp/opp-v2-kryo-cpu.yaml#
+
+      - if:
+          properties:
+            compatible:
+              const: operating-points-v2-qcom-level
+        then:
+          $ref: /schemas/opp/opp-v2-qcom-level.yaml#
+
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcs404
+
+    then:
+      properties:
+        cpus:
+          type: object
+
+          patternProperties:
+            '^cpu@[0-9a-f]+$':
+              type: object
+
+              properties:
+                power-domains:
+                  maxItems: 1
+
+                power-domain-names:
+                  items:
+                    - const: cpr
+
+              required:
+                - power-domains
+                - power-domain-names
+
+      patternProperties:
+        '^opp-table(-[a-z0-9]+)?$':
+          if:
+            properties:
+              compatible:
+                const: operating-points-v2-kryo-cpu
+          then:
+            patternProperties:
+              '^opp-?[0-9]+$':
+                required:
+                  - required-opps
+
+additionalProperties: true
+
+examples:
+  - |
+    / {
+        model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
+        compatible = "qcom,qcs404-evb-1000", "qcom,qcs404-evb", "qcom,qcs404";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cpus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            CPU0: cpu@100 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x100>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU1: cpu@101 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x101>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU2: cpu@102 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x102>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+
+            CPU3: cpu@103 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a53";
+                reg = <0x103>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                next-level-cache = <&L2_0>;
+                #cooling-cells = <2>;
+                clocks = <&apcs_glb>;
+                operating-points-v2 = <&cpu_opp_table>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+            };
+        };
+
+        cpu_opp_table: opp-table-cpu {
+            compatible = "operating-points-v2-kryo-cpu";
+            opp-shared;
+
+            opp-1094400000 {
+                opp-hz = /bits/ 64 <1094400000>;
+                required-opps = <&cpr_opp1>;
+            };
+            opp-1248000000 {
+                opp-hz = /bits/ 64 <1248000000>;
+                required-opps = <&cpr_opp2>;
+            };
+            opp-1401600000 {
+                opp-hz = /bits/ 64 <1401600000>;
+                required-opps = <&cpr_opp3>;
+            };
+        };
+
+        cpr_opp_table: opp-table-cpr {
+            compatible = "operating-points-v2-qcom-level";
+
+            cpr_opp1: opp1 {
+                opp-level = <1>;
+                qcom,opp-fuse-level = <1>;
+            };
+            cpr_opp2: opp2 {
+                opp-level = <2>;
+                qcom,opp-fuse-level = <2>;
+            };
+            cpr_opp3: opp3 {
+                opp-level = <3>;
+                qcom,opp-fuse-level = <3>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
index 0429fb774f10..0401c11da8d9 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/allwinner,sun4i-a10-crypto.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Security System Device Tree Bindings
+title: Allwinner A10 Security System
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -44,6 +44,16 @@ properties:
       - const: ahb
       - const: mod
 
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
   resets:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
index 00648f9d9278..4287678aa79f 100644
--- a/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
+++ b/Documentation/devicetree/bindings/crypto/allwinner,sun8i-ce.yaml
@@ -14,6 +14,7 @@ properties:
     enum:
       - allwinner,sun8i-h3-crypto
       - allwinner,sun8i-r40-crypto
+      - allwinner,sun20i-d1-crypto
       - allwinner,sun50i-a64-crypto
       - allwinner,sun50i-h5-crypto
       - allwinner,sun50i-h6-crypto
@@ -29,6 +30,7 @@ properties:
       - description: Bus clock
       - description: Module clock
       - description: MBus clock
+      - description: TRNG clock (RC oscillator)
     minItems: 2
 
   clock-names:
@@ -36,6 +38,7 @@ properties:
       - const: bus
       - const: mod
       - const: ram
+      - const: trng
     minItems: 2
 
   resets:
@@ -44,19 +47,33 @@ properties:
 if:
   properties:
     compatible:
-      const: allwinner,sun50i-h6-crypto
+      enum:
+        - allwinner,sun20i-d1-crypto
 then:
   properties:
     clocks:
-      minItems: 3
+      minItems: 4
     clock-names:
-      minItems: 3
+      minItems: 4
 else:
-  properties:
-    clocks:
-      maxItems: 2
-    clock-names:
-      maxItems: 2
+  if:
+    properties:
+      compatible:
+        const: allwinner,sun50i-h6-crypto
+  then:
+    properties:
+      clocks:
+        minItems: 3
+        maxItems: 3
+      clock-names:
+        minItems: 3
+        maxItems: 3
+  else:
+    properties:
+      clocks:
+        maxItems: 2
+      clock-names:
+        maxItems: 2
 
 required:
   - compatible
@@ -82,4 +99,3 @@ examples:
       clock-names = "bus", "mod";
       resets = <&ccu RST_BUS_CE>;
     };
-
diff --git a/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml b/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml
new file mode 100644
index 000000000000..a772d232de09
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/aspeed,ast2500-hace.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/aspeed,ast2500-hace.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED HACE hash and crypto Hardware Accelerator Engines
+
+maintainers:
+  - Neal Liu <neal_liu@aspeedtech.com>
+
+description: |
+  The Hash and Crypto Engine (HACE) is designed to accelerate the throughput
+  of hash data digest, encryption, and decryption. Basically, HACE can be
+  divided into two independently engines - Hash Engine and Crypto Engine.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2500-hace
+      - aspeed,ast2600-hace
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    hace: crypto@1e6d0000 {
+        compatible = "aspeed,ast2600-hace";
+        reg = <0x1e6d0000 0x200>;
+        interrupts = <4>;
+        clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+        resets = <&syscon ASPEED_RESET_HACE>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml b/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml
new file mode 100644
index 000000000000..b18f178aac06
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/aspeed,ast2600-acry.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED ACRY ECDSA/RSA Hardware Accelerator Engines
+
+maintainers:
+  - Neal Liu <neal_liu@aspeedtech.com>
+
+description:
+  The ACRY ECDSA/RSA engines is designed to accelerate the throughput
+  of ECDSA/RSA signature and verification. Basically, ACRY can be
+  divided into two independent engines - ECC Engine and RSA Engine.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-acry
+
+  reg:
+    items:
+      - description: acry base address & size
+      - description: acry sram base address & size
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    acry: crypto@1e6fa000 {
+        compatible = "aspeed,ast2600-acry";
+        reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>;
+        interrupts = <160>;
+        clocks = <&syscon ASPEED_CLK_GATE_RSACLK>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml
new file mode 100644
index 000000000000..0b7383b3106b
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-aes.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-aes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Advanced Encryption Standard (AES) HW cryptographic accelerator
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
+
+properties:
+  compatible:
+    const: atmel,at91sam9g46-aes
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: aes_clk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+
+    aes: crypto@e1810000 {
+      compatible = "atmel,at91sam9g46-aes";
+      reg = <0xe1810000 0x100>;
+      interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+      clock-names = "aes_clk";
+      dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+             <&dma0 AT91_XDMAC_DT_PERID(2)>;
+      dma-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml
new file mode 100644
index 000000000000..ee2ffb034325
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-sha.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-sha.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Secure Hash Algorithm (SHA) HW cryptographic accelerator
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
+
+properties:
+  compatible:
+    const: atmel,at91sam9g46-sha
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: sha_clk
+
+  dmas:
+    maxItems: 1
+    description: TX DMA Channel
+
+  dma-names:
+    const: tx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+
+    sha: crypto@e1814000 {
+      compatible = "atmel,at91sam9g46-sha";
+      reg = <0xe1814000 0x100>;
+      interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+      clock-names = "sha_clk";
+      dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+      dma-names = "tx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml
new file mode 100644
index 000000000000..3d6ed24b1b00
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/atmel,at91sam9g46-tdes.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/atmel,at91sam9g46-tdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Triple Data Encryption Standard (TDES) HW cryptographic accelerator
+
+maintainers:
+  - Tudor Ambarus <tudor.ambarus@linaro.org>
+
+properties:
+  compatible:
+    const: atmel,at91sam9g46-tdes
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: tdes_clk
+
+  dmas:
+    items:
+      - description: TX DMA Channel
+      - description: RX DMA Channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/dma/at91.h>
+
+    tdes: crypto@e2014000 {
+      compatible = "atmel,at91sam9g46-tdes";
+      reg = <0xe2014000 0x100>;
+      interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+      clock-names = "tdes_clk";
+      dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+             <&dma0 AT91_XDMAC_DT_PERID(53)>;
+      dma-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt b/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
deleted file mode 100644
index f2aab3dc2b52..000000000000
--- a/Documentation/devicetree/bindings/crypto/atmel-crypto.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-* Atmel HW cryptographic accelerators
-
-These are the HW cryptographic accelerators found on some Atmel products.
-
-* Advanced Encryption Standard (AES)
-
-Required properties:
-- compatible : Should be "atmel,at91sam9g46-aes".
-- reg: Should contain AES registers location and length.
-- interrupts: Should contain the IRQ line for the AES.
-- dmas: List of two DMA specifiers as described in
-        atmel-dma.txt and dma.txt files.
-- dma-names: Contains one identifier string for each DMA specifier
-             in the dmas property.
-
-Example:
-aes@f8038000 {
-	compatible = "atmel,at91sam9g46-aes";
-	reg = <0xf8038000 0x100>;
-	interrupts = <43 4 0>;
-	dmas = <&dma1 2 18>,
-	       <&dma1 2 19>;
-	dma-names = "tx", "rx";
-
-* Triple Data Encryption Standard (Triple DES)
-
-Required properties:
-- compatible : Should be "atmel,at91sam9g46-tdes".
-- reg: Should contain TDES registers location and length.
-- interrupts: Should contain the IRQ line for the TDES.
-
-Optional properties:
-- dmas: List of two DMA specifiers as described in
-        atmel-dma.txt and dma.txt files.
-- dma-names: Contains one identifier string for each DMA specifier
-             in the dmas property.
-
-Example:
-tdes@f803c000 {
-	compatible = "atmel,at91sam9g46-tdes";
-	reg = <0xf803c000 0x100>;
-	interrupts = <44 4 0>;
-	dmas = <&dma1 2 20>,
-	       <&dma1 2 21>;
-	dma-names = "tx", "rx";
-};
-
-* Secure Hash Algorithm (SHA)
-
-Required properties:
-- compatible : Should be "atmel,at91sam9g46-sha".
-- reg: Should contain SHA registers location and length.
-- interrupts: Should contain the IRQ line for the SHA.
-
-Optional properties:
-- dmas: One DMA specifiers as described in
-        atmel-dma.txt and dma.txt files.
-- dma-names: Contains one identifier string for each DMA specifier
-             in the dmas property. Only one "tx" string needed.
-
-Example:
-sha@f8034000 {
-	compatible = "atmel,at91sam9g46-sha";
-	reg = <0xf8034000 0x100>;
-	interrupts = <42 4 0>;
-	dmas = <&dma1 2 17>;
-	dma-names = "tx";
-};
diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml
new file mode 100644
index 000000000000..286dffa0671b
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0-mon.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2008-2011 Freescale Semiconductor Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl,sec-v4.0-mon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Secure Non-Volatile Storage (SNVS)
+
+maintainers:
+  - '"Horia Geantă" <horia.geanta@nxp.com>'
+  - Pankaj Gupta <pankaj.gupta@nxp.com>
+  - Gaurav Jain <gaurav.jain@nxp.com>
+
+description:
+  Node defines address range and the associated interrupt for the SNVS function.
+  This function monitors security state information & reports security
+  violations. This also included rtc, system power off and ON/OFF key.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: fsl,sec-v4.0-mon
+          - const: syscon
+          - const: simple-mfd
+      - items:
+          - const: fsl,sec-v5.0-mon
+          - const: fsl,sec-v4.0-mon
+      - items:
+          - enum:
+              - fsl,sec-v5.3-mon
+              - fsl,sec-v5.4-mon
+          - const: fsl,sec-v5.0-mon
+          - const: fsl,sec-v4.0-mon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  snvs-rtc-lp:
+    type: object
+    additionalProperties: false
+    description:
+      Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
+
+    properties:
+      compatible:
+        const: fsl,sec-v4.0-mon-rtc-lp
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: snvs-rtc
+
+      interrupts:
+        # VFxxx has only one. What is the 2nd one?
+        minItems: 1
+        maxItems: 2
+
+      regmap:
+        description: Parent node containing registers
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      offset:
+        description: LP register offset
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 0x34
+
+    required:
+      - compatible
+      - interrupts
+      - regmap
+
+  snvs-powerkey:
+    type: object
+    additionalProperties: false
+    description:
+      The snvs-pwrkey is designed to enable POWER key function which controlled
+      by SNVS ONOFF, the driver can report the status of POWER key and wakeup
+      system if pressed after system suspend.
+
+    properties:
+      compatible:
+        const: fsl,sec-v4.0-pwrkey
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        const: snvs-pwrkey
+
+      interrupts:
+        maxItems: 1
+
+      regmap:
+        description: Parent node containing registers
+        $ref: /schemas/types.yaml#/definitions/phandle
+
+      wakeup-source: true
+
+      linux,keycode:
+        default: 116
+
+    required:
+      - compatible
+      - interrupts
+      - regmap
+
+  snvs-lpgpr:
+    $ref: /schemas/nvmem/snvs-lpgpr.yaml#
+
+  snvs-poweroff:
+    description:
+      The SNVS could drive signal to PMIC to turn off system power by setting
+      SNVS_LP LPCR register.
+    $ref: /schemas/power/reset/syscon-poweroff.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx7d-clock.h>
+
+    sec_mon: sec-mon@314000 {
+        compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+        reg = <0x314000 0x1000>;
+
+        snvs-rtc-lp {
+            compatible = "fsl,sec-v4.0-mon-rtc-lp";
+            regmap = <&sec_mon>;
+            offset = <0x34>;
+            clocks = <&clks IMX7D_SNVS_CLK>;
+            clock-names = "snvs-rtc";
+            interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        snvs-powerkey {
+            compatible = "fsl,sec-v4.0-pwrkey";
+            regmap = <&sec_mon>;
+            clocks = <&clks IMX7D_SNVS_CLK>;
+            clock-names = "snvs-pwrkey";
+            interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+            linux,keycode = <116>; /* KEY_POWER */
+            wakeup-source;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml
new file mode 100644
index 000000000000..0a9ed2848b7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml
@@ -0,0 +1,266 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2008-2011 Freescale Semiconductor Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/fsl,sec-v4.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SEC 4
+
+maintainers:
+  - '"Horia Geantă" <horia.geanta@nxp.com>'
+  - Pankaj Gupta <pankaj.gupta@nxp.com>
+  - Gaurav Jain <gaurav.jain@nxp.com>
+
+description: |
+  NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator
+  Accelerator and Assurance Module (CAAM).
+
+  SEC 4 h/w can process requests from 2 types of sources.
+  1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4).
+  2. Job Rings (HW interface between cores & SEC 4 registers).
+
+  High Speed Data Path Configuration:
+
+  HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts
+  such as the P4080.  The number of simultaneous dequeues the QI can make is
+  equal to the number of Descriptor Controller (DECO) engines in a particular
+  SEC version.  E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus
+  dequeue from 5 subportals simultaneously.
+
+  Job Ring Data Path Configuration:
+
+  Each JR is located on a separate 4k page, they may (or may not) be made visible
+  in the memory partition devoted to a particular core.  The P4080 has 4 JRs, so
+  up to 4 JRs can be configured; and all 4 JRs process requests in parallel.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: fsl,sec-v5.4
+          - const: fsl,sec-v5.0
+          - const: fsl,sec-v4.0
+      - items:
+          - enum:
+              - fsl,imx6ul-caam
+              - fsl,sec-v5.0
+          - const: fsl,sec-v4.0
+      - const: fsl,sec-v4.0
+
+  reg:
+    maxItems: 1
+
+  ranges:
+    maxItems: 1
+
+  '#address-cells':
+    enum: [1, 2]
+
+  '#size-cells':
+    enum: [1, 2]
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [mem, aclk, ipg, emi_slow]
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  fsl,sec-era:
+    description: Defines the 'ERA' of the SEC device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+  '^jr@[0-9a-f]+$':
+    type: object
+    additionalProperties: false
+    description:
+      Job Ring (JR) Node. Defines data processing interface to SEC 4 across the
+      peripheral bus for purposes of processing cryptographic descriptors. The
+      specified address range can be made visible to one (or more) cores. The
+      interrupt defined for this node is controlled within the address range of
+      this node.
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: fsl,sec-v5.4-job-ring
+              - const: fsl,sec-v5.0-job-ring
+              - const: fsl,sec-v4.0-job-ring
+          - items:
+              - const: fsl,sec-v5.0-job-ring
+              - const: fsl,sec-v4.0-job-ring
+          - const: fsl,sec-v4.0-job-ring
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      fsl,liodn:
+        description:
+          Specifies the LIODN to be used in conjunction with the ppid-to-liodn
+          table that specifies the PPID to LIODN mapping. Needed if the PAMU is
+          used.  Value is a 12 bit value where value is a LIODN ID for this JR.
+          This property is normally set by boot firmware.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        maximum: 0xfff
+
+  '^rtic@[0-9a-f]+$':
+    type: object
+    additionalProperties: false
+    description:
+      Run Time Integrity Check (RTIC) Node. Defines a register space that
+      contains up to 5 sets of addresses and their lengths (sizes) that will be
+      checked at run time.  After an initial hash result is calculated, these
+      addresses are checked by HW to monitor any change.  If any memory is
+      modified, a Security Violation is triggered (see SNVS definition).
+
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: fsl,sec-v5.4-rtic
+              - const: fsl,sec-v5.0-rtic
+              - const: fsl,sec-v4.0-rtic
+          - const: fsl,sec-v4.0-rtic
+
+      reg:
+        maxItems: 1
+
+      ranges:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 1
+
+    patternProperties:
+      '^rtic-[a-z]@[0-9a-f]+$':
+        type: object
+        additionalProperties: false
+        description:
+          Run Time Integrity Check (RTIC) Memory Node defines individual RTIC
+          memory regions that are used to perform run-time integrity check of
+          memory areas that should not modified. The node defines a register
+          that contains the memory address & length (combined) and a second
+          register that contains the hash result in big endian format.
+
+        properties:
+          compatible:
+            oneOf:
+              - items:
+                  - const: fsl,sec-v5.4-rtic-memory
+                  - const: fsl,sec-v5.0-rtic-memory
+                  - const: fsl,sec-v4.0-rtic-memory
+              - const: fsl,sec-v4.0-rtic-memory
+
+          reg:
+            items:
+              - description: RTIC memory address
+              - description: RTIC hash result
+
+          fsl,liodn:
+            description:
+              Specifies the LIODN to be used in conjunction with the
+              ppid-to-liodn table that specifies the PPID to LIODN mapping.
+              Needed if the PAMU is used.  Value is a 12 bit value where value
+              is a LIODN ID for this JR. This property is normally set by boot
+              firmware.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 0xfff
+
+          fsl,rtic-region:
+            description:
+              Specifies the HW address (36 bit address) for this region
+              followed by the length of the HW partition to be checked;
+              the address is represented as a 64 bit quantity followed
+              by a 32 bit length.
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    crypto@300000 {
+        compatible = "fsl,sec-v4.0";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0x300000 0x10000>;
+        ranges = <0 0x300000 0x10000>;
+        interrupts = <92 2>;
+
+        jr@1000 {
+            compatible = "fsl,sec-v4.0-job-ring";
+            reg = <0x1000 0x1000>;
+            interrupts = <88 2>;
+        };
+
+        jr@2000 {
+            compatible = "fsl,sec-v4.0-job-ring";
+            reg = <0x2000 0x1000>;
+            interrupts = <89 2>;
+        };
+
+        jr@3000 {
+            compatible = "fsl,sec-v4.0-job-ring";
+            reg = <0x3000 0x1000>;
+            interrupts = <90 2>;
+        };
+
+        jr@4000 {
+            compatible = "fsl,sec-v4.0-job-ring";
+            reg = <0x4000 0x1000>;
+            interrupts = <91 2>;
+        };
+
+        rtic@6000 {
+            compatible = "fsl,sec-v4.0-rtic";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            reg = <0x6000 0x100>;
+            ranges = <0x0 0x6100 0xe00>;
+
+            rtic-a@0 {
+                compatible = "fsl,sec-v4.0-rtic-memory";
+                reg = <0x00 0x20>, <0x100 0x80>;
+            };
+
+            rtic-b@20 {
+                compatible = "fsl,sec-v4.0-rtic-memory";
+                reg = <0x20 0x20>, <0x200 0x80>;
+            };
+
+            rtic-c@40 {
+                compatible = "fsl,sec-v4.0-rtic-memory";
+                reg = <0x40 0x20>, <0x300 0x80>;
+            };
+
+            rtic-d@60 {
+                compatible = "fsl,sec-v4.0-rtic-memory";
+                reg = <0x60 0x20>, <0x500 0x80>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
deleted file mode 100644
index 8f359f473ada..000000000000
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ /dev/null
@@ -1,553 +0,0 @@
-=====================================================================
-SEC 4 Device Tree Binding
-Copyright (C) 2008-2011 Freescale Semiconductor Inc.
-
- CONTENTS
-   -Overview
-   -SEC 4 Node
-   -Job Ring Node
-   -Run Time Integrity Check (RTIC) Node
-   -Run Time Integrity Check (RTIC) Memory Node
-   -Secure Non-Volatile Storage (SNVS) Node
-   -Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
-   -Full Example
-
-NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator
-Accelerator and Assurance Module (CAAM).
-
-=====================================================================
-Overview
-
-DESCRIPTION
-
-SEC 4 h/w can process requests from 2 types of sources.
-1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4).
-2. Job Rings (HW interface between cores & SEC 4 registers).
-
-High Speed Data Path Configuration:
-
-HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts
-such as the P4080.  The number of simultaneous dequeues the QI can make is
-equal to the number of Descriptor Controller (DECO) engines in a particular
-SEC version.  E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus
-dequeue from 5 subportals simultaneously.
-
-Job Ring Data Path Configuration:
-
-Each JR is located on a separate 4k page, they may (or may not) be made visible
-in the memory partition devoted to a particular core.  The P4080 has 4 JRs, so
-up to 4 JRs can be configured; and all 4 JRs process requests in parallel.
-
-=====================================================================
-SEC 4 Node
-
-Description
-
-    Node defines the base address of the SEC 4 block.
-    This block specifies the address range of all global
-    configuration registers for the SEC 4 block.  It
-    also receives interrupts from the Run Time Integrity Check
-    (RTIC) function within the SEC 4 block.
-
-PROPERTIES
-
-   - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v4.0"
-
-   - fsl,sec-era
-      Usage: optional
-      Value type: <u32>
-      Definition: A standard property. Define the 'ERA' of the SEC
-          device.
-
-   - #address-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing physical addresses in child nodes.
-
-   - #size-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing the size of physical addresses in
-           child nodes.
-
-   - reg
-      Usage: required
-      Value type: <prop-encoded-array>
-      Definition: A standard property.  Specifies the physical
-          address and length of the SEC4 configuration registers.
-          registers
-
-   - ranges
-       Usage: required
-       Value type: <prop-encoded-array>
-       Definition: A standard property.  Specifies the physical address
-           range of the SEC 4.0 register space (-SNVS not included).  A
-           triplet that includes the child address, parent address, &
-           length.
-
-   - interrupts
-      Usage: required
-      Value type: <prop_encoded-array>
-      Definition:  Specifies the interrupts generated by this
-           device.  The value of the interrupts property
-           consists of one interrupt specifier. The format
-           of the specifier is defined by the binding document
-           describing the node's interrupt parent.
-
-   - clocks
-      Usage: required if SEC 4.0 requires explicit enablement of clocks
-      Value type: <prop_encoded-array>
-      Definition:  A list of phandle and clock specifier pairs describing
-          the clocks required for enabling and disabling SEC 4.0.
-
-   - clock-names
-      Usage: required if SEC 4.0 requires explicit enablement of clocks
-      Value type: <string>
-      Definition: A list of clock name strings in the same order as the
-          clocks property.
-
-   Note: All other standard properties (see the Devicetree Specification)
-   are allowed but are optional.
-
-
-EXAMPLE
-
-iMX6QDL/SX requires four clocks
-
-	crypto@300000 {
-		compatible = "fsl,sec-v4.0";
-		fsl,sec-era = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x300000 0x10000>;
-		ranges = <0 0x300000 0x10000>;
-		interrupt-parent = <&mpic>;
-		interrupts = <92 2>;
-		clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
-			 <&clks IMX6QDL_CLK_CAAM_ACLK>,
-			 <&clks IMX6QDL_CLK_CAAM_IPG>,
-			 <&clks IMX6QDL_CLK_EIM_SLOW>;
-		clock-names = "mem", "aclk", "ipg", "emi_slow";
-	};
-
-
-iMX6UL does only require three clocks
-
-	crypto: crypto@2140000 {
-		compatible = "fsl,sec-v4.0";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x2140000 0x3c000>;
-		ranges = <0 0x2140000 0x3c000>;
-		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-
-		clocks = <&clks IMX6UL_CLK_CAAM_MEM>,
-			 <&clks IMX6UL_CLK_CAAM_ACLK>,
-			 <&clks IMX6UL_CLK_CAAM_IPG>;
-		clock-names = "mem", "aclk", "ipg";
-	};
-
-=====================================================================
-Job Ring (JR) Node
-
-    Child of the crypto node defines data processing interface to SEC 4
-    across the peripheral bus for purposes of processing
-    cryptographic descriptors. The specified address
-    range can be made visible to one (or more) cores.
-    The interrupt defined for this node is controlled within
-    the address range of this node.
-
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v4.0-job-ring"
-
-  - reg
-      Usage: required
-      Value type: <prop-encoded-array>
-      Definition: Specifies a two JR parameters:  an offset from
-          the parent physical address and the length the JR registers.
-
-   - fsl,liodn
-       Usage: optional-but-recommended
-       Value type: <prop-encoded-array>
-       Definition:
-           Specifies the LIODN to be used in conjunction with
-           the ppid-to-liodn table that specifies the PPID to LIODN mapping.
-           Needed if the PAMU is used.  Value is a 12 bit value
-           where value is a LIODN ID for this JR. This property is
-           normally set by boot firmware.
-
-   - interrupts
-      Usage: required
-      Value type: <prop_encoded-array>
-      Definition:  Specifies the interrupts generated by this
-           device.  The value of the interrupts property
-           consists of one interrupt specifier. The format
-           of the specifier is defined by the binding document
-           describing the node's interrupt parent.
-
-EXAMPLE
-	jr@1000 {
-		compatible = "fsl,sec-v4.0-job-ring";
-		reg = <0x1000 0x1000>;
-		fsl,liodn = <0x081>;
-		interrupt-parent = <&mpic>;
-		interrupts = <88 2>;
-	};
-
-
-=====================================================================
-Run Time Integrity Check (RTIC) Node
-
-  Child node of the crypto node.  Defines a register space that
-  contains up to 5 sets of addresses and their lengths (sizes) that
-  will be checked at run time.  After an initial hash result is
-  calculated, these addresses are checked by HW to monitor any
-  change.  If any memory is modified, a Security Violation is
-  triggered (see SNVS definition).
-
-
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v4.0-rtic".
-
-   - #address-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing physical addresses in child nodes.  Must
-           have a value of 1.
-
-   - #size-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing the size of physical addresses in
-           child nodes.  Must have a value of 1.
-
-  - reg
-      Usage: required
-      Value type: <prop-encoded-array>
-      Definition: A standard property.  Specifies a two parameters:
-          an offset from the parent physical address and the length
-          the SEC4 registers.
-
-   - ranges
-       Usage: required
-       Value type: <prop-encoded-array>
-       Definition: A standard property.  Specifies the physical address
-           range of the SEC 4 register space (-SNVS not included).  A
-           triplet that includes the child address, parent address, &
-           length.
-
-EXAMPLE
-	rtic@6000 {
-		compatible = "fsl,sec-v4.0-rtic";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x6000 0x100>;
-		ranges = <0x0 0x6100 0xe00>;
-	};
-
-=====================================================================
-Run Time Integrity Check (RTIC) Memory Node
-  A child node that defines individual RTIC memory regions that are used to
-  perform run-time integrity check of memory areas that should not modified.
-  The node defines a register that contains the memory address &
-  length (combined) and a second register that contains the hash result
-  in big endian format.
-
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v4.0-rtic-memory".
-
-  - reg
-      Usage: required
-      Value type: <prop-encoded-array>
-      Definition: A standard property.  Specifies two parameters:
-          an offset from the parent physical address and the length:
-
-          1. The location of the RTIC memory address & length registers.
-          2. The location RTIC hash result.
-
-  - fsl,rtic-region
-       Usage: optional-but-recommended
-       Value type: <prop-encoded-array>
-       Definition:
-           Specifies the HW address (36 bit address) for this region
-           followed by the length of the HW partition to be checked;
-           the address is represented as a 64 bit quantity followed
-           by a 32 bit length.
-
-   - fsl,liodn
-       Usage: optional-but-recommended
-       Value type: <prop-encoded-array>
-       Definition:
-           Specifies the LIODN to be used in conjunction with
-           the ppid-to-liodn table that specifies the PPID to LIODN
-           mapping.  Needed if the PAMU is used.  Value is a 12 bit value
-           where value is a LIODN ID for this RTIC memory region. This
-           property is normally set by boot firmware.
-
-EXAMPLE
-	rtic-a@0 {
-		compatible = "fsl,sec-v4.0-rtic-memory";
-		reg = <0x00 0x20 0x100 0x80>;
-		fsl,liodn   = <0x03c>;
-		fsl,rtic-region  = <0x12345678 0x12345678 0x12345678>;
-	};
-
-=====================================================================
-Secure Non-Volatile Storage (SNVS) Node
-
-    Node defines address range and the associated
-    interrupt for the SNVS function.  This function
-    monitors security state information & reports
-    security violations. This also included rtc,
-    system power off and ON/OFF key.
-
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v4.0-mon" and "syscon".
-
-  - reg
-      Usage: required
-      Value type: <prop-encoded-array>
-      Definition: A standard property.  Specifies the physical
-          address and length of the SEC4 configuration
-          registers.
-
-   - #address-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing physical addresses in child nodes.  Must
-           have a value of 1.
-
-   - #size-cells
-       Usage: required
-       Value type: <u32>
-       Definition: A standard property.  Defines the number of cells
-           for representing the size of physical addresses in
-           child nodes.  Must have a value of 1.
-
-   - ranges
-       Usage: required
-       Value type: <prop-encoded-array>
-       Definition: A standard property.  Specifies the physical address
-           range of the SNVS register space.  A triplet that includes
-           the child address, parent address, & length.
-
-   - interrupts
-      Usage: optional
-      Value type: <prop_encoded-array>
-      Definition:  Specifies the interrupts generated by this
-           device.  The value of the interrupts property
-           consists of one interrupt specifier. The format
-           of the specifier is defined by the binding document
-           describing the node's interrupt parent.
-
-EXAMPLE
-	sec_mon@314000 {
-		compatible = "fsl,sec-v4.0-mon", "syscon";
-		reg = <0x314000 0x1000>;
-		ranges = <0 0x314000 0x1000>;
-		interrupt-parent = <&mpic>;
-		interrupts = <93 2>;
-	};
-
-=====================================================================
-Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
-
-  A SNVS child node that defines SNVS LP RTC.
-
-  - compatible
-      Usage: required
-      Value type: <string>
-      Definition: Must include "fsl,sec-v4.0-mon-rtc-lp".
-
-  - interrupts
-      Usage: required
-      Value type: <prop_encoded-array>
-      Definition: Specifies the interrupts generated by this
-	   device.  The value of the interrupts property
-	   consists of one interrupt specifier. The format
-	   of the specifier is defined by the binding document
-	   describing the node's interrupt parent.
-
- - regmap
-	Usage: required
-	Value type: <phandle>
-	Definition: this is phandle to the register map node.
-
- - offset
-	Usage: option
-	value type: <u32>
-	Definition: LP register offset. default it is 0x34.
-
-   - clocks
-      Usage: optional, required if SNVS LP RTC requires explicit
-          enablement of clocks
-      Value type: <prop_encoded-array>
-      Definition:  a clock specifier describing the clock required for
-          enabling and disabling SNVS LP RTC.
-
-   - clock-names
-      Usage: optional, required if SNVS LP RTC requires explicit
-          enablement of clocks
-      Value type: <string>
-      Definition: clock name string should be "snvs-rtc".
-
-EXAMPLE
-	sec_mon_rtc_lp@1 {
-		compatible = "fsl,sec-v4.0-mon-rtc-lp";
-		interrupts = <93 2>;
-		regmap = <&snvs>;
-		offset = <0x34>;
-		clocks = <&clks IMX7D_SNVS_CLK>;
-		clock-names = "snvs-rtc";
-	};
-
-=====================================================================
-System ON/OFF key driver
-
-  The snvs-pwrkey is designed to enable POWER key function which controlled
-  by SNVS ONOFF, the driver can report the status of POWER key and wakeup
-  system if pressed after system suspend.
-
-  - compatible:
-      Usage: required
-      Value type: <string>
-      Definition: Mush include "fsl,sec-v4.0-pwrkey".
-
-  - interrupts:
-      Usage: required
-      Value type: <prop_encoded-array>
-      Definition: The SNVS ON/OFF interrupt number to the CPU(s).
-
-  - linux,keycode:
-      Usage: option
-      Value type: <int>
-      Definition: Keycode to emit, KEY_POWER by default.
-
-  - wakeup-source:
-      Usage: option
-      Value type: <boo>
-      Definition: Button can wake-up the system.
-
- - regmap:
-      Usage: required:
-      Value type: <phandle>
-      Definition: this is phandle to the register map node.
-
-EXAMPLE:
-	snvs-pwrkey@020cc000 {
-		compatible = "fsl,sec-v4.0-pwrkey";
-		regmap = <&snvs>;
-		interrupts = <0 4 0x4>
-	        linux,keycode = <116>; /* KEY_POWER */
-		wakeup-source;
-	};
-
-=====================================================================
-FULL EXAMPLE
-
-	crypto: crypto@300000 {
-		compatible = "fsl,sec-v4.0";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x300000 0x10000>;
-		ranges = <0 0x300000 0x10000>;
-		interrupt-parent = <&mpic>;
-		interrupts = <92 2>;
-
-		sec_jr0: jr@1000 {
-			compatible = "fsl,sec-v4.0-job-ring";
-			reg = <0x1000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <88 2>;
-		};
-
-		sec_jr1: jr@2000 {
-			compatible = "fsl,sec-v4.0-job-ring";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <89 2>;
-		};
-
-		sec_jr2: jr@3000 {
-			compatible = "fsl,sec-v4.0-job-ring";
-			reg = <0x3000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <90 2>;
-		};
-
-		sec_jr3: jr@4000 {
-			compatible = "fsl,sec-v4.0-job-ring";
-			reg = <0x4000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <91 2>;
-		};
-
-		rtic@6000 {
-			compatible = "fsl,sec-v4.0-rtic";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x6000 0x100>;
-			ranges = <0x0 0x6100 0xe00>;
-
-			rtic_a: rtic-a@0 {
-				compatible = "fsl,sec-v4.0-rtic-memory";
-				reg = <0x00 0x20 0x100 0x80>;
-			};
-
-			rtic_b: rtic-b@20 {
-				compatible = "fsl,sec-v4.0-rtic-memory";
-				reg = <0x20 0x20 0x200 0x80>;
-			};
-
-			rtic_c: rtic-c@40 {
-				compatible = "fsl,sec-v4.0-rtic-memory";
-				reg = <0x40 0x20 0x300 0x80>;
-			};
-
-			rtic_d: rtic-d@60 {
-				compatible = "fsl,sec-v4.0-rtic-memory";
-				reg = <0x60 0x20 0x500 0x80>;
-			};
-		};
-	};
-
-	sec_mon: sec_mon@314000 {
-		compatible = "fsl,sec-v4.0-mon";
-		reg = <0x314000 0x1000>;
-		ranges = <0 0x314000 0x1000>;
-
-		sec_mon_rtc_lp@34 {
-			compatible = "fsl,sec-v4.0-mon-rtc-lp";
-			regmap = <&sec_mon>;
-			offset = <0x34>;
-			interrupts = <93 2>;
-			clocks = <&clks IMX7D_SNVS_CLK>;
-			clock-names = "snvs-rtc";
-		};
-
-		snvs-pwrkey@020cc000 {
-			compatible = "fsl,sec-v4.0-pwrkey";
-			regmap = <&sec_mon>;
-			interrupts = <0 4 0x4>;
-			linux,keycode = <116>; /* KEY_POWER */
-			wakeup-source;
-		};
-	};
-
-=====================================================================
diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
index 9c53c27bd20a..e0fe63957888 100644
--- a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
+++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml
@@ -22,19 +22,28 @@ properties:
 
   intel,npe-handle:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the NPE this crypto engine
+          - description: the NPE instance number
     description: phandle to the NPE this crypto engine is using, the cell
       describing the NPE instance to be used.
 
   queue-rx:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the RX queue on the NPE
+          - description: the queue instance number
     description: phandle to the RX queue on the NPE, the cell describing
       the queue instance to be used.
 
   queue-txready:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    maxItems: 1
+    items:
+      - items:
+          - description: phandle to the TX READY queue on the NPE
+          - description: the queue instance number
     description: phandle to the TX READY queue on the NPE, the cell describing
       the queue instance to be used.
 
diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml
index ee2c099981b2..fedd8be56ad6 100644
--- a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml
+++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-aes.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-aes.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Keem Bay OCS AES Device Tree Bindings
+title: Intel Keem Bay OCS AES
 
 maintainers:
   - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml
new file mode 100644
index 000000000000..2bb95247b64f
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-ecc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-ecc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay OCS ECC
+
+maintainers:
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+  - Prabhjot Khurana <prabhjot.khurana@intel.com>
+
+description:
+  The Intel Keem Bay Offload and Crypto Subsystem (OCS) Elliptic Curve
+  Cryptography (ECC) device provides hardware acceleration for elliptic curve
+  cryptography using the NIST P-256 and NIST P-384 elliptic curves.
+
+properties:
+  compatible:
+    const: intel,keembay-ocs-ecc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    crypto@30001000 {
+      compatible = "intel,keembay-ocs-ecc";
+      reg = <0x30001000 0x1000>;
+      interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&scmi_clk 95>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml
index acb92706d280..46e2853ab8f4 100644
--- a/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml
+++ b/Documentation/devicetree/bindings/crypto/intel,keembay-ocs-hcu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/intel,keembay-ocs-hcu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel Keem Bay OCS HCU Device Tree Bindings
+title: Intel Keem Bay OCS HCU
 
 maintainers:
   - Declan Murphy <declan.murphy@intel.com>
diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
new file mode 100644
index 000000000000..92e1d76e29ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom,inline-crypto-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. (QTI) Inline Crypto Engine
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,sm8550-inline-crypto-engine
+      - const: qcom,inline-crypto-engine
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+
+    crypto@1d88000 {
+      compatible = "qcom,sm8550-inline-crypto-engine",
+                   "qcom,inline-crypto-engine";
+      reg = <0x01d88000 0x8000>;
+      clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.txt b/Documentation/devicetree/bindings/crypto/qcom,prng.txt
deleted file mode 100644
index 7ee0e9eac973..000000000000
--- a/Documentation/devicetree/bindings/crypto/qcom,prng.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Qualcomm MSM pseudo random number generator.
-
-Required properties:
-
-- compatible  : should be "qcom,prng" for 8916 etc
-              : should be "qcom,prng-ee" for 8996 and later using EE
-		(Execution Environment) slice of prng
-- reg         : specifies base physical address and size of the registers map
-- clocks      : phandle to clock-controller plus clock-specifier pair
-- clock-names : "core" clocks all registers, FIFO and circuits in PRNG IP block
-
-Example:
-
-	rng@f9bff000 {
-		compatible = "qcom,prng";
-		reg = <0xf9bff000 0x200>;
-		clocks = <&clock GCC_PRNG_AHB_CLK>;
-		clock-names = "core";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml
new file mode 100644
index 000000000000..bb42f4588b40
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom,prng.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Pseudo Random Number Generator
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,prng  # 8916 etc.
+      - qcom,prng-ee  # 8996 and later using EE
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: core
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    rng@f9bff000 {
+        compatible = "qcom,prng";
+        reg = <0xf9bff000 0x200>;
+        clocks = <&clk 125>;
+        clock-names = "core";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.txt b/Documentation/devicetree/bindings/crypto/qcom-qce.txt
deleted file mode 100644
index fdd53b184ba8..000000000000
--- a/Documentation/devicetree/bindings/crypto/qcom-qce.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Qualcomm crypto engine driver
-
-Required properties:
-
-- compatible  : should be "qcom,crypto-v5.1"
-- reg         : specifies base physical address and size of the registers map
-- clocks      : phandle to clock-controller plus clock-specifier pair
-- clock-names : "iface" clocks register interface
-                "bus" clocks data transfer interface
-                "core" clocks rest of the crypto block
-- dmas        : DMA specifiers for tx and rx dma channels. For more see
-                Documentation/devicetree/bindings/dma/dma.txt
-- dma-names   : DMA request names should be "rx" and "tx"
-
-Example:
-	crypto@fd45a000 {
-		compatible = "qcom,crypto-v5.1";
-		reg = <0xfd45a000 0x6000>;
-		clocks = <&gcc GCC_CE2_AHB_CLK>,
-			 <&gcc GCC_CE2_AXI_CLK>,
-			 <&gcc GCC_CE2_CLK>;
-		clock-names = "iface", "bus", "core";
-		dmas = <&cryptobam 2>, <&cryptobam 3>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
new file mode 100644
index 000000000000..e375bd981300
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/qcom-qce.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm crypto engine driver
+
+maintainers:
+  - Bhupesh Sharma <bhupesh.sharma@linaro.org>
+
+description:
+  This document defines the binding for the QCE crypto
+  controller found on Qualcomm parts.
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,crypto-v5.1
+        deprecated: true
+        description: Kept only for ABI backward compatibility
+
+      - const: qcom,crypto-v5.4
+        deprecated: true
+        description: Kept only for ABI backward compatibility
+
+      - items:
+          - enum:
+              - qcom,ipq6018-qce
+              - qcom,ipq8074-qce
+              - qcom,msm8996-qce
+              - qcom,sdm845-qce
+          - const: qcom,ipq4019-qce
+          - const: qcom,qce
+
+      - items:
+          - enum:
+              - qcom,sm8250-qce
+              - qcom,sm8350-qce
+              - qcom,sm8450-qce
+              - qcom,sm8550-qce
+          - const: qcom,sm8150-qce
+          - const: qcom,qce
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: iface clocks register interface.
+      - description: bus clocks data transfer interface.
+      - description: core clocks rest of the crypto block.
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  iommus:
+    minItems: 1
+    maxItems: 8
+    description:
+      phandle to apps_smmu node with sid mask.
+
+  interconnects:
+    maxItems: 1
+    description:
+      Interconnect path between qce crypto and main memory.
+
+  interconnect-names:
+    const: memory
+
+  dmas:
+    items:
+      - description: DMA specifiers for rx dma channel.
+      - description: DMA specifiers for tx dma channel.
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,crypto-v5.1
+              - qcom,crypto-v5.4
+              - qcom,ipq4019-qce
+
+    then:
+      required:
+        - clocks
+        - clock-names
+
+required:
+  - compatible
+  - reg
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-apq8084.h>
+    crypto-engine@fd45a000 {
+        compatible = "qcom,ipq6018-qce", "qcom,ipq4019-qce", "qcom,qce";
+        reg = <0xfd45a000 0x6000>;
+        clocks = <&gcc GCC_CE2_AHB_CLK>,
+                 <&gcc GCC_CE2_AXI_CLK>,
+                 <&gcc GCC_CE2_CLK>;
+        clock-names = "iface", "bus", "core";
+        dmas = <&cryptobam 2>, <&cryptobam 3>;
+        dma-names = "rx", "tx";
+        iommus = <&apps_smmu 0x584 0x0011>,
+                 <&apps_smmu 0x586 0x0011>,
+                 <&apps_smmu 0x594 0x0011>,
+                 <&apps_smmu 0x596 0x0011>;
+    };
diff --git a/Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml b/Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml
new file mode 100644
index 000000000000..f1a9da8bff7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/crypto/rockchip,rk3288-crypto.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Electronics Security Accelerator
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-crypto
+      - rockchip,rk3328-crypto
+      - rockchip,rk3399-crypto
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+
+  resets:
+    minItems: 1
+    maxItems: 3
+
+  reset-names:
+    minItems: 1
+    maxItems: 3
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-crypto
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          items:
+            - const: aclk
+            - const: hclk
+            - const: sclk
+            - const: apb_pclk
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: crypto-rst
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3328-crypto
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: hclk_master
+            - const: hclk_slave
+            - const: sclk
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: crypto-rst
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-crypto
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: hclk_master
+            - const: hclk_slave
+            - const: sclk
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: master
+            - const: slave
+            - const: crypto-rst
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/rk3288-cru.h>
+    crypto@ff8a0000 {
+      compatible = "rockchip,rk3288-crypto";
+      reg = <0xff8a0000 0x4000>;
+      interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
+               <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
+      clock-names = "aclk", "hclk", "sclk", "apb_pclk";
+      resets = <&cru SRST_CRYPTO>;
+      reset-names = "crypto-rst";
+    };
diff --git a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt b/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
deleted file mode 100644
index 5e2ba385b8c9..000000000000
--- a/Documentation/devicetree/bindings/crypto/rockchip-crypto.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Rockchip Electronics And Security Accelerator
-
-Required properties:
-- compatible: Should be "rockchip,rk3288-crypto"
-- reg: Base physical address of the engine and length of memory mapped
-       region
-- interrupts: Interrupt number
-- clocks: Reference to the clocks about crypto
-- clock-names: "aclk" used to clock data
-	       "hclk" used to clock data
-	       "sclk" used to clock crypto accelerator
-	       "apb_pclk" used to clock dma
-- resets: Must contain an entry for each entry in reset-names.
-	  See ../reset/reset.txt for details.
-- reset-names: Must include the name "crypto-rst".
-
-Examples:
-
-	crypto: cypto-controller@ff8a0000 {
-		compatible = "rockchip,rk3288-crypto";
-		reg = <0xff8a0000 0x4000>;
-		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
-			 <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
-		clock-names = "aclk", "hclk", "sclk", "apb_pclk";
-		resets = <&cru SRST_CRYPTO>;
-		reset-names = "crypto-rst";
-	};
diff --git a/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
index 676950bb7b37..5b31891c97fe 100644
--- a/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
+++ b/Documentation/devicetree/bindings/crypto/samsung-slimsss.yaml
@@ -24,7 +24,6 @@ properties:
     maxItems: 1
 
   clocks:
-    minItems: 2
     maxItems: 2
 
   clock-names:
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml
index cee624c14f07..50b2c2e0c3cd 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-crc.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/crypto/st,stm32-crc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 CRC bindings
+title: STMicroelectronics STM32 CRC
 
 maintainers:
-  - Lionel Debieve <lionel.debieve@st.com>
+  - Lionel Debieve <lionel.debieve@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
index a4574552502a..0ddeb8a9a7a0 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-cryp.yaml
@@ -4,14 +4,20 @@
 $id: http://devicetree.org/schemas/crypto/st,stm32-cryp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 CRYP bindings
+title: STMicroelectronics STM32 CRYP
+
+description: The STM32 CRYP block is built on the CRYP block found in
+  the STn8820 SoC introduced in 2007, and subsequently used in the U8500
+  SoC in 2010.
 
 maintainers:
-  - Lionel Debieve <lionel.debieve@st.com>
+  - Lionel Debieve <lionel.debieve@foss.st.com>
 
 properties:
   compatible:
     enum:
+      - st,stn8820-cryp
+      - stericsson,ux500-cryp
       - st,stm32f756-cryp
       - st,stm32mp1-cryp
 
@@ -27,6 +33,19 @@ properties:
   resets:
     maxItems: 1
 
+  dmas:
+    items:
+      - description: mem2cryp DMA channel
+      - description: cryp2mem DMA channel
+
+  dma-names:
+    items:
+      - const: mem2cryp
+      - const: cryp2mem
+
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
index 6dd658f0912c..b767ec72a999 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-hash.yaml
@@ -4,14 +4,20 @@
 $id: http://devicetree.org/schemas/crypto/st,stm32-hash.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 HASH bindings
+title: STMicroelectronics STM32 HASH
+
+description: The STM32 HASH block is built on the HASH block found in
+  the STn8820 SoC introduced in 2007, and subsequently used in the U8500
+  SoC in 2010.
 
 maintainers:
-  - Lionel Debieve <lionel.debieve@st.com>
+  - Lionel Debieve <lionel.debieve@foss.st.com>
 
 properties:
   compatible:
     enum:
+      - st,stn8820-hash
+      - stericsson,ux500-hash
       - st,stm32f456-hash
       - st,stm32f756-hash
 
@@ -41,11 +47,26 @@ properties:
     maximum: 2
     default: 0
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
   - clocks
-  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          items:
+            const: stericsson,ux500-hash
+    then:
+      properties:
+        interrupts: false
+    else:
+      required:
+        - interrupts
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
index a410d2cedde6..77ec8bc70bf7 100644
--- a/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
+++ b/Documentation/devicetree/bindings/crypto/ti,sa2ul.yaml
@@ -15,6 +15,7 @@ properties:
       - ti,j721e-sa2ul
       - ti,am654-sa2ul
       - ti,am64-sa2ul
+      - ti,am62-sa3ul
 
   reg:
     maxItems: 1
@@ -25,8 +26,8 @@ properties:
   dmas:
     items:
       - description: TX DMA Channel
-      - description: RX DMA Channel #1
-      - description: RX DMA Channel #2
+      - description: 'RX DMA Channel #1'
+      - description: 'RX DMA Channel #2'
 
   dma-names:
     items:
@@ -34,8 +35,6 @@ properties:
       - const: rx1
       - const: rx2
 
-  dma-coherent: true
-
   "#address-cells":
     const: 2
 
@@ -71,16 +70,6 @@ required:
   - dmas
   - dma-names
 
-if:
-  properties:
-    compatible:
-      enum:
-        - ti,j721e-sa2ul
-        - ti,am654-sa2ul
-then:
-  required:
-    - dma-coherent
-
 additionalProperties: false
 
 examples:
@@ -94,5 +83,4 @@ examples:
         dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
                <&main_udmap 0x4001>;
         dma-names = "tx", "rx1", "rx2";
-        dma-coherent;
     };
diff --git a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
index 55dd6e3d270d..9e8fbd02b150 100644
--- a/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
+++ b/Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/crypto/xlnx,zynqmp-aes.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx ZynqMP AES-GCM Hardware Accelerator Device Tree Bindings
+title: Xilinx ZynqMP AES-GCM Hardware Accelerator
 
 maintainers:
   - Kalyani Akula <kalyani.akula@xilinx.com>
diff --git a/Documentation/devicetree/bindings/ddr/lpddr2-timings.txt b/Documentation/devicetree/bindings/ddr/lpddr2-timings.txt
deleted file mode 100644
index 9ceb19e0c7fd..000000000000
--- a/Documentation/devicetree/bindings/ddr/lpddr2-timings.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin
-
-Required properties:
-- compatible : Should be "jedec,lpddr2-timings"
-- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
-- max-freq : maximum DDR clock frequency for the speed-bin. Type is <u32>
-
-Optional properties:
-
-The following properties represent AC timing parameters from the memory
-data-sheet of the device for a given speed-bin. All these properties are
-of type <u32> and the default unit is ps (pico seconds). Parameters with
-a different unit have a suffix indicating the unit such as 'tRAS-max-ns'
-- tRCD
-- tWR
-- tRAS-min
-- tRRD
-- tWTR
-- tXP
-- tRTP
-- tDQSCK-max
-- tFAW
-- tZQCS
-- tZQinit
-- tRPab
-- tZQCL
-- tCKESR
-- tRAS-max-ns
-- tDQSCK-max-derated
-
-Example:
-
-timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
-	compatible	= "jedec,lpddr2-timings";
-	min-freq	= <10000000>;
-	max-freq	= <400000000>;
-	tRPab		= <21000>;
-	tRCD		= <18000>;
-	tWR		= <15000>;
-	tRAS-min	= <42000>;
-	tRRD		= <10000>;
-	tWTR		= <7500>;
-	tXP		= <7500>;
-	tRTP		= <7500>;
-	tCKESR		= <15000>;
-	tDQSCK-max	= <5500>;
-	tFAW		= <50000>;
-	tZQCS		= <90000>;
-	tZQCL		= <360000>;
-	tZQinit		= <1000000>;
-	tRAS-max-ns	= <70000>;
-};
diff --git a/Documentation/devicetree/bindings/ddr/lpddr2.txt b/Documentation/devicetree/bindings/ddr/lpddr2.txt
deleted file mode 100644
index ddd40121e6f6..000000000000
--- a/Documentation/devicetree/bindings/ddr/lpddr2.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2
-
-Required properties:
-- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2",
-  "jedec,lpddr2-s4"
-
-  "ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type
-
-  "ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type
-
-  "ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type
-
-- density  : <u32> representing density in Mb (Mega bits)
-
-- io-width : <u32> representing bus width. Possible values are 8, 16, and 32
-
-Optional properties:
-
-The following optional properties represent the minimum value of some AC
-timing parameters of the DDR device in terms of number of clock cycles.
-These values shall be obtained from the device data-sheet.
-- tRRD-min-tck
-- tWTR-min-tck
-- tXP-min-tck
-- tRTP-min-tck
-- tCKE-min-tck
-- tRPab-min-tck
-- tRCD-min-tck
-- tWR-min-tck
-- tRASmin-min-tck
-- tCKESR-min-tck
-- tFAW-min-tck
-
-Child nodes:
-- The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
-  "lpddr2-timings" provides AC timing parameters of the device for
-  a given speed-bin. The user may provide the timings for as many
-  speed-bins as is required. Please see Documentation/devicetree/
-  bindings/ddr/lpddr2-timings.txt for more information on "lpddr2-timings"
-
-Example:
-
-elpida_ECB240ABACN : lpddr2 {
-	compatible	= "Elpida,ECB240ABACN","jedec,lpddr2-s4";
-	density		= <2048>;
-	io-width	= <32>;
-
-	tRPab-min-tck	= <3>;
-	tRCD-min-tck	= <3>;
-	tWR-min-tck	= <3>;
-	tRASmin-min-tck	= <3>;
-	tRRD-min-tck	= <2>;
-	tWTR-min-tck	= <2>;
-	tXP-min-tck	= <2>;
-	tRTP-min-tck	= <2>;
-	tCKE-min-tck	= <3>;
-	tCKESR-min-tck	= <3>;
-	tFAW-min-tck	= <8>;
-
-	timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
-		compatible	= "jedec,lpddr2-timings";
-		min-freq	= <10000000>;
-		max-freq	= <400000000>;
-		tRPab		= <21000>;
-		tRCD		= <18000>;
-		tWR		= <15000>;
-		tRAS-min	= <42000>;
-		tRRD		= <10000>;
-		tWTR		= <7500>;
-		tXP		= <7500>;
-		tRTP		= <7500>;
-		tCKESR		= <15000>;
-		tDQSCK-max	= <5500>;
-		tFAW		= <50000>;
-		tZQCS		= <90000>;
-		tZQCL		= <360000>;
-		tZQinit		= <1000000>;
-		tRAS-max-ns	= <70000>;
-	};
-
-	timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
-		compatible	= "jedec,lpddr2-timings";
-		min-freq	= <10000000>;
-		max-freq	= <200000000>;
-		tRPab		= <21000>;
-		tRCD		= <18000>;
-		tWR		= <15000>;
-		tRAS-min	= <42000>;
-		tRRD		= <10000>;
-		tWTR		= <10000>;
-		tXP		= <7500>;
-		tRTP		= <7500>;
-		tCKESR		= <15000>;
-		tDQSCK-max	= <5500>;
-		tFAW		= <50000>;
-		tZQCS		= <90000>;
-		tZQCL		= <360000>;
-		tZQinit		= <1000000>;
-		tRAS-max-ns	= <70000>;
-	};
-
-}
diff --git a/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt b/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
deleted file mode 100644
index 84705e50a3fd..000000000000
--- a/Documentation/devicetree/bindings/ddr/lpddr3-timings.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* AC timing parameters of LPDDR3 memories for a given speed-bin.
-
-The structures are based on LPDDR2 and extended where needed.
-
-Required properties:
-- compatible : Should be "jedec,lpddr3-timings"
-- min-freq : minimum DDR clock frequency for the speed-bin. Type is <u32>
-- reg : maximum DDR clock frequency for the speed-bin. Type is <u32>
-
-Optional properties:
-
-The following properties represent AC timing parameters from the memory
-data-sheet of the device for a given speed-bin. All these properties are
-of type <u32> and the default unit is ps (pico seconds).
-- tRFC
-- tRRD
-- tRPab
-- tRPpb
-- tRCD
-- tRC
-- tRAS
-- tWTR
-- tWR
-- tRTP
-- tW2W-C2C
-- tR2R-C2C
-- tFAW
-- tXSR
-- tXP
-- tCKE
-- tCKESR
-- tMRD
-
-Example:
-
-timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
-	compatible	= "jedec,lpddr3-timings";
-	reg		= <800000000>; /* workaround: it shows max-freq */
-	min-freq	= <100000000>;
-	tRFC		= <65000>;
-	tRRD		= <6000>;
-	tRPab		= <12000>;
-	tRPpb		= <12000>;
-	tRCD		= <10000>;
-	tRC		= <33750>;
-	tRAS		= <23000>;
-	tWTR		= <3750>;
-	tWR		= <7500>;
-	tRTP		= <3750>;
-	tW2W-C2C	= <0>;
-	tR2R-C2C	= <0>;
-	tFAW		= <25000>;
-	tXSR		= <70000>;
-	tXP		= <3750>;
-	tCKE		= <3750>;
-	tCKESR		= <3750>;
-	tMRD		= <7000>;
-};
diff --git a/Documentation/devicetree/bindings/ddr/lpddr3.txt b/Documentation/devicetree/bindings/ddr/lpddr3.txt
deleted file mode 100644
index b221e653d384..000000000000
--- a/Documentation/devicetree/bindings/ddr/lpddr3.txt
+++ /dev/null
@@ -1,106 +0,0 @@
-* LPDDR3 SDRAM memories compliant to JEDEC JESD209-3C
-
-Required properties:
-- compatible : Should be "<vendor>,<type>", and generic value "jedec,lpddr3".
-  Example "<vendor>,<type>" values:
-    "samsung,K3QF2F20DB"
-
-- density  : <u32> representing density in Mb (Mega bits)
-- io-width : <u32> representing bus width. Possible values are 8, 16, 32, 64
-- #address-cells: Must be set to 1
-- #size-cells: Must be set to 0
-
-Optional properties:
-
-- manufacturer-id : <u32>     Manufacturer ID value read from Mode Register 5
-- revision-id     : <u32 u32> Revision IDs read from Mode Registers 6 and 7
-
-The following optional properties represent the minimum value of some AC
-timing parameters of the DDR device in terms of number of clock cycles.
-These values shall be obtained from the device data-sheet.
-- tRFC-min-tck
-- tRRD-min-tck
-- tRPab-min-tck
-- tRPpb-min-tck
-- tRCD-min-tck
-- tRC-min-tck
-- tRAS-min-tck
-- tWTR-min-tck
-- tWR-min-tck
-- tRTP-min-tck
-- tW2W-C2C-min-tck
-- tR2R-C2C-min-tck
-- tWL-min-tck
-- tDQSCK-min-tck
-- tRL-min-tck
-- tFAW-min-tck
-- tXSR-min-tck
-- tXP-min-tck
-- tCKE-min-tck
-- tCKESR-min-tck
-- tMRD-min-tck
-
-Child nodes:
-- The lpddr3 node may have one or more child nodes of type "lpddr3-timings".
-  "lpddr3-timings" provides AC timing parameters of the device for
-  a given speed-bin. Please see Documentation/devicetree/
-  bindings/ddr/lpddr3-timings.txt for more information on "lpddr3-timings"
-
-Example:
-
-samsung_K3QF2F20DB: lpddr3 {
-	compatible	= "samsung,K3QF2F20DB", "jedec,lpddr3";
-	density		= <16384>;
-	io-width	= <32>;
-	manufacturer-id = <1>;
-	revision-id     = <123 234>;
-	#address-cells	= <1>;
-	#size-cells	= <0>;
-
-	tRFC-min-tck		= <17>;
-	tRRD-min-tck		= <2>;
-	tRPab-min-tck		= <2>;
-	tRPpb-min-tck		= <2>;
-	tRCD-min-tck		= <3>;
-	tRC-min-tck		= <6>;
-	tRAS-min-tck		= <5>;
-	tWTR-min-tck		= <2>;
-	tWR-min-tck		= <7>;
-	tRTP-min-tck		= <2>;
-	tW2W-C2C-min-tck	= <0>;
-	tR2R-C2C-min-tck	= <0>;
-	tWL-min-tck		= <8>;
-	tDQSCK-min-tck		= <5>;
-	tRL-min-tck		= <14>;
-	tFAW-min-tck		= <5>;
-	tXSR-min-tck		= <12>;
-	tXP-min-tck		= <2>;
-	tCKE-min-tck		= <2>;
-	tCKESR-min-tck		= <2>;
-	tMRD-min-tck		= <5>;
-
-	timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
-		compatible	= "jedec,lpddr3-timings";
-		/* workaround: 'reg' shows max-freq */
-		reg		= <800000000>;
-		min-freq	= <100000000>;
-		tRFC		= <65000>;
-		tRRD		= <6000>;
-		tRPab		= <12000>;
-		tRPpb		= <12000>;
-		tRCD		= <10000>;
-		tRC		= <33750>;
-		tRAS		= <23000>;
-		tWTR		= <3750>;
-		tWR		= <7500>;
-		tRTP		= <3750>;
-		tW2W-C2C	= <0>;
-		tR2R-C2C	= <0>;
-		tFAW		= <25000>;
-		tXSR		= <70000>;
-		tXP		= <3750>;
-		tCKE		= <3750>;
-		tCKESR		= <3750>;
-		tMRD		= <7000>;
-	};
-}
diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml
index d318fccf78f1..2bdd05af6079 100644
--- a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml
+++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-nocp.yaml
@@ -8,7 +8,7 @@ title: Samsung Exynos NoC (Network on Chip) Probe
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   The Samsung Exynos542x SoC has a NoC (Network on Chip) Probe for NoC bus.
diff --git a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml
index c9a8cb5fd555..e300df4b47f3 100644
--- a/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml
+++ b/Documentation/devicetree/bindings/devfreq/event/samsung,exynos-ppmu.yaml
@@ -8,7 +8,7 @@ title: Samsung Exynos SoC PPMU (Platform Performance Monitoring Unit)
 
 maintainers:
   - Chanwoo Choi <cw00.choi@samsung.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   The Samsung Exynos SoC has PPMU (Platform Performance Monitoring Unit) for
diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
deleted file mode 100644
index bcaa2c08ac11..000000000000
--- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+++ /dev/null
@@ -1,488 +0,0 @@
-* Generic Exynos Bus frequency device
-
-The Samsung Exynos SoC has many buses for data transfer between DRAM
-and sub-blocks in SoC. Most Exynos SoCs share the common architecture
-for buses. Generally, each bus of Exynos SoC includes a source clock
-and a power line, which are able to change the clock frequency
-of the bus in runtime. To monitor the usage of each bus in runtime,
-the driver uses the PPMU (Platform Performance Monitoring Unit), which
-is able to measure the current load of sub-blocks.
-
-The Exynos SoC includes the various sub-blocks which have the each AXI bus.
-The each AXI bus has the owned source clock but, has not the only owned
-power line. The power line might be shared among one more sub-blocks.
-So, we can divide into two type of device as the role of each sub-block.
-There are two type of bus devices as following:
-- parent bus device
-- passive bus device
-
-Basically, parent and passive bus device share the same power line.
-The parent bus device can only change the voltage of shared power line
-and the rest bus devices (passive bus device) depend on the decision of
-the parent bus device. If there are three blocks which share the VDD_xxx
-power line, Only one block should be parent device and then the rest blocks
-should depend on the parent device as passive device.
-
-	VDD_xxx |--- A block (parent)
-		|--- B block (passive)
-		|--- C block (passive)
-
-There are a little different composition among Exynos SoC because each Exynos
-SoC has different sub-blocks. Therefore, such difference should be specified
-in devicetree file instead of each device driver. In result, this driver
-is able to support the bus frequency for all Exynos SoCs.
-
-Required properties for all bus devices:
-- compatible: Should be "samsung,exynos-bus".
-- clock-names : the name of clock used by the bus, "bus".
-- clocks : phandles for clock specified in "clock-names" property.
-- operating-points-v2: the OPP table including frequency/voltage information
-  to support DVFS (Dynamic Voltage/Frequency Scaling) feature.
-
-Required properties only for parent bus device:
-- vdd-supply: the regulator to provide the buses with the voltage.
-- devfreq-events: the devfreq-event device to monitor the current utilization
-  of buses.
-
-Required properties only for passive bus device:
-- devfreq: the parent bus device.
-
-Optional properties only for parent bus device:
-- exynos,saturation-ratio: the percentage value which is used to calibrate
-			the performance count against total cycle count.
-
-Optional properties for the interconnect functionality (QoS frequency
-constraints):
-- #interconnect-cells: should be 0.
-- interconnects: as documented in ../interconnect.txt, describes a path at the
-  higher level interconnects used by this interconnect provider.
-  If this interconnect provider is directly linked to a top level interconnect
-  provider the property contains only one phandle. The provider extends
-  the interconnect graph by linking its node to a node registered by provider
-  pointed to by first phandle in the 'interconnects' property.
-
-- samsung,data-clock-ratio: ratio of the data throughput in B/s to minimum data
-   clock frequency in Hz, default value is 8 when this property is missing.
-
-Detailed correlation between sub-blocks and power line according to Exynos SoC:
-- In case of Exynos3250, there are two power line as following:
-	VDD_MIF |--- DMC
-
-	VDD_INT |--- LEFTBUS (parent device)
-		|--- PERIL
-		|--- MFC
-		|--- G3D
-		|--- RIGHTBUS
-		|--- PERIR
-		|--- FSYS
-		|--- LCD0
-		|--- PERIR
-		|--- ISP
-		|--- CAM
-
-- In case of Exynos4210, there is one power line as following:
-	VDD_INT |--- DMC (parent device)
-		|--- LEFTBUS
-		|--- PERIL
-		|--- MFC(L)
-		|--- G3D
-		|--- TV
-		|--- LCD0
-		|--- RIGHTBUS
-		|--- PERIR
-		|--- MFC(R)
-		|--- CAM
-		|--- FSYS
-		|--- GPS
-		|--- LCD0
-		|--- LCD1
-
-- In case of Exynos4x12, there are two power line as following:
-	VDD_MIF |--- DMC
-
-	VDD_INT |--- LEFTBUS (parent device)
-		|--- PERIL
-		|--- MFC(L)
-		|--- G3D
-		|--- TV
-		|--- IMAGE
-		|--- RIGHTBUS
-		|--- PERIR
-		|--- MFC(R)
-		|--- CAM
-		|--- FSYS
-		|--- GPS
-		|--- LCD0
-		|--- ISP
-
-- In case of Exynos5422, there are two power line as following:
-	VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
-	        |--- DREX 1
-
-	VDD_INT |--- NoC_Core (parent device)
-		|--- G2D
-		|--- G3D
-		|--- DISP1
-		|--- NoC_WCORE
-		|--- GSCL
-		|--- MSCL
-		|--- ISP
-		|--- MFC
-		|--- GEN
-		|--- PERIS
-		|--- PERIC
-		|--- FSYS
-		|--- FSYS2
-
-- In case of Exynos5433, there is VDD_INT power line as following:
-	VDD_INT |--- G2D (parent device)
-		|--- MSCL
-		|--- GSCL
-		|--- JPEG
-		|--- MFC
-		|--- HEVC
-		|--- BUS0
-		|--- BUS1
-		|--- BUS2
-		|--- PERIS (Fixed clock rate)
-		|--- PERIC (Fixed clock rate)
-		|--- FSYS  (Fixed clock rate)
-
-Example 1:
-	Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to
-	power line (regulator). The MIF (Memory Interface) AXI bus is used to
-	transfer data between DRAM and CPU and uses the VDD_MIF regulator.
-
-	- MIF (Memory Interface) block
-	: VDD_MIF |--- DMC (Dynamic Memory Controller)
-
-	- INT (Internal) block
-	: VDD_INT |--- LEFTBUS (parent device)
-		  |--- PERIL
-		  |--- MFC
-		  |--- G3D
-		  |--- RIGHTBUS
-		  |--- FSYS
-		  |--- LCD0
-		  |--- PERIR
-		  |--- ISP
-		  |--- CAM
-
-	- MIF bus's frequency/voltage table
-	-----------------------
-	|Lv| Freq   | Voltage |
-	-----------------------
-	|L1| 50000  |800000   |
-	|L2| 100000 |800000   |
-	|L3| 134000 |800000   |
-	|L4| 200000 |825000   |
-	|L5| 400000 |875000   |
-	-----------------------
-
-	- INT bus's frequency/voltage table
-	----------------------------------------------------------
-	|Block|LEFTBUS|RIGHTBUS|MCUISP |ISP    |PERIL  ||VDD_INT |
-	| name|       |LCD0    |       |       |       ||        |
-	|     |       |FSYS    |       |       |       ||        |
-	|     |       |MFC     |       |       |       ||        |
-	----------------------------------------------------------
-	|Mode |*parent|passive |passive|passive|passive||        |
-	----------------------------------------------------------
-	|Lv   |Frequency                               ||Voltage |
-	----------------------------------------------------------
-	|L1   |50000  |50000   |50000  |50000  |50000  ||900000  |
-	|L2   |80000  |80000   |80000  |80000  |80000  ||900000  |
-	|L3   |100000 |100000  |100000 |100000 |100000 ||1000000 |
-	|L4   |134000 |134000  |200000 |200000 |       ||1000000 |
-	|L5   |200000 |200000  |400000 |300000 |       ||1000000 |
-	----------------------------------------------------------
-
-Example 2:
-	The bus of DMC (Dynamic Memory Controller) block in exynos3250.dtsi
-	is listed below:
-
-	bus_dmc: bus_dmc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu_dmc CLK_DIV_DMC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_dmc_opp_table>;
-		status = "disabled";
-	};
-
-	bus_dmc_opp_table: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-			opp-microvolt = <800000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <800000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <800000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <825000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-			opp-microvolt = <875000>;
-		};
-	};
-
-	bus_leftbus: bus_leftbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_GDL>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_rightbus: bus_rightbus {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_GDR>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_lcd0: bus_lcd0 {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_160>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_fsys: bus_fsys {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_200>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_mcuisp: bus_mcuisp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_mcuisp_opp_table>;
-		status = "disabled";
-	};
-
-	bus_isp: bus_isp {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_266>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_isp_opp_table>;
-		status = "disabled";
-	};
-
-	bus_peril: bus_peril {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_DIV_ACLK_100>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_peril_opp_table>;
-		status = "disabled";
-	};
-
-	bus_mfc: bus_mfc {
-		compatible = "samsung,exynos-bus";
-		clocks = <&cmu CLK_SCLK_MFC>;
-		clock-names = "bus";
-		operating-points-v2 = <&bus_leftbus_opp_table>;
-		status = "disabled";
-	};
-
-	bus_leftbus_opp_table: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-			opp-microvolt = <900000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-			opp-microvolt = <1000000>;
-		};
-		opp-134000000 {
-			opp-hz = /bits/ 64 <134000000>;
-			opp-microvolt = <1000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-			opp-microvolt = <1000000>;
-		};
-	};
-
-	bus_mcuisp_opp_table: opp_table2 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-		opp-400000000 {
-			opp-hz = /bits/ 64 <400000000>;
-		};
-	};
-
-	bus_isp_opp_table: opp_table3 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-		opp-200000000 {
-			opp-hz = /bits/ 64 <200000000>;
-		};
-		opp-300000000 {
-			opp-hz = /bits/ 64 <300000000>;
-		};
-	};
-
-	bus_peril_opp_table: opp_table4 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-50000000 {
-			opp-hz = /bits/ 64 <50000000>;
-		};
-		opp-80000000 {
-			opp-hz = /bits/ 64 <80000000>;
-		};
-		opp-100000000 {
-			opp-hz = /bits/ 64 <100000000>;
-		};
-	};
-
-
-	Usage case to handle the frequency and voltage of bus on runtime
-	in exynos3250-rinato.dts is listed below:
-
-	&bus_dmc {
-		devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
-		vdd-supply = <&buck1_reg>;	/* VDD_MIF */
-		status = "okay";
-	};
-
-	&bus_leftbus {
-		devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
-		vdd-supply = <&buck3_reg>;
-		status = "okay";
-	};
-
-	&bus_rightbus {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_lcd0 {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_fsys {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_mcuisp {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_isp {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_peril {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-	&bus_mfc {
-		devfreq = <&bus_leftbus>;
-		status = "okay";
-	};
-
-Example 3:
-	An interconnect path "bus_display -- bus_leftbus -- bus_dmc" on
-	Exynos4412 SoC with video mixer as an interconnect consumer device.
-
-	soc {
-		bus_dmc: bus_dmc {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_DMC>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_dmc_opp_table>;
-			samsung,data-clock-ratio = <4>;
-			#interconnect-cells = <0>;
-		};
-
-		bus_leftbus: bus_leftbus {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_DIV_GDL>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_leftbus_opp_table>;
-			#interconnect-cells = <0>;
-			interconnects = <&bus_dmc>;
-		};
-
-		bus_display: bus_display {
-			compatible = "samsung,exynos-bus";
-			clocks = <&clock CLK_ACLK160>;
-			clock-names = "bus";
-			operating-points-v2 = <&bus_display_opp_table>;
-			#interconnect-cells = <0>;
-			interconnects = <&bus_leftbus &bus_dmc>;
-		};
-
-		bus_dmc_opp_table: opp_table1 {
-			compatible = "operating-points-v2";
-			/* ... */
-		}
-
-		bus_leftbus_opp_table: opp_table3 {
-			compatible = "operating-points-v2";
-			/* ... */
-		};
-
-		bus_display_opp_table: opp_table4 {
-			compatible = "operating-points-v2";
-			/* .. */
-		};
-
-		&mixer {
-			compatible = "samsung,exynos4212-mixer";
-			interconnects = <&bus_display &bus_dmc>;
-			/* ... */
-		};
-	};
diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
deleted file mode 100644
index 3fbeb3733c48..000000000000
--- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
+++ /dev/null
@@ -1,212 +0,0 @@
-* Rockchip rk3399 DMC (Dynamic Memory Controller) device
-
-Required properties:
-- compatible:		 Must be "rockchip,rk3399-dmc".
-- devfreq-events:	 Node to get DDR loading, Refer to
-			 Documentation/devicetree/bindings/devfreq/event/
-			 rockchip-dfi.txt
-- clocks:		 Phandles for clock specified in "clock-names" property
-- clock-names :		 The name of clock used by the DFI, must be
-			 "pclk_ddr_mon";
-- operating-points-v2:	 Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
-			 for details.
-- center-supply:	 DMC supply node.
-- status:		 Marks the node enabled/disabled.
-- rockchip,pmu:		 Phandle to the syscon managing the "PMU general register
-			 files".
-
-Optional properties:
-- interrupts:		 The CPU interrupt number. The interrupt specifier
-			 format depends on the interrupt controller.
-			 It should be a DCF interrupt. When DDR DVFS finishes
-			 a DCF interrupt is triggered.
-- rockchip,pmu:		 Phandle to the syscon managing the "PMU general register
-			 files".
-
-Following properties relate to DDR timing:
-
-- rockchip,dram_speed_bin :	  Value reference include/dt-bindings/clock/rk3399-ddr.h,
-				  it selects the DDR3 cl-trp-trcd type. It must be
-				  set according to "Speed Bin" in DDR3 datasheet,
-				  DO NOT use a smaller "Speed Bin" than specified
-				  for the DDR3 being used.
-
-- rockchip,pd_idle :		  Configure the PD_IDLE value. Defines the
-				  power-down idle period in which memories are
-				  placed into power-down mode if bus is idle
-				  for PD_IDLE DFI clock cycles.
-
-- rockchip,sr_idle :		  Configure the SR_IDLE value. Defines the
-				  self-refresh idle period in which memories are
-				  placed into self-refresh mode if bus is idle
-				  for SR_IDLE * 1024 DFI clock cycles (DFI
-				  clocks freq is half of DRAM clock), default
-				  value is "0".
-
-- rockchip,sr_mc_gate_idle :	  Defines the memory self-refresh and controller
-				  clock gating idle period. Memories are placed
-				  into self-refresh mode and memory controller
-				  clock arg gating started if bus is idle for
-				  sr_mc_gate_idle*1024 DFI clock cycles.
-
-- rockchip,srpd_lite_idle :	  Defines the self-refresh power down idle
-				  period in which memories are placed into
-				  self-refresh power down mode if bus is idle
-				  for srpd_lite_idle * 1024 DFI clock cycles.
-				  This parameter is for LPDDR4 only.
-
-- rockchip,standby_idle :	  Defines the standby idle period in which
-				  memories are placed into self-refresh mode.
-				  The controller, pi, PHY and DRAM clock will
-				  be gated if bus is idle for standby_idle * DFI
-				  clock cycles.
-
-- rockchip,dram_dll_dis_freq :	  Defines the DDR3 DLL bypass frequency in MHz.
-				  When DDR frequency is less than DRAM_DLL_DISB_FREQ,
-				  DDR3 DLL will be bypassed. Note: if DLL was bypassed,
-				  the odt will also stop working.
-
-- rockchip,phy_dll_dis_freq :	  Defines the PHY dll bypass frequency in
-				  MHz (Mega Hz). When DDR frequency is less than
-				  DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
-				  Note: PHY DLL and PHY ODT are independent.
-
-- rockchip,ddr3_odt_dis_freq :	  When the DRAM type is DDR3, this parameter defines
-				  the ODT disable frequency in MHz (Mega Hz).
-				  when the DDR frequency is  less then ddr3_odt_dis_freq,
-				  the ODT on the DRAM side and controller side are
-				  both disabled.
-
-- rockchip,ddr3_drv :		  When the DRAM type is DDR3, this parameter defines
-				  the DRAM side driver strength in ohms. Default
-				  value is 40.
-
-- rockchip,ddr3_odt :		  When the DRAM type is DDR3, this parameter defines
-				  the DRAM side ODT strength in ohms. Default value
-				  is 120.
-
-- rockchip,phy_ddr3_ca_drv :	  When the DRAM type is DDR3, this parameter defines
-				  the phy side CA line (incluing command line,
-				  address line and clock line) driver strength.
-				  Default value is 40.
-
-- rockchip,phy_ddr3_dq_drv :	  When the DRAM type is DDR3, this parameter defines
-				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is 40.
-
-- rockchip,phy_ddr3_odt : 	  When the DRAM type is DDR3, this parameter defines
-				  the PHY side ODT strength. Default value is 240.
-
-- rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines
-				  then ODT disable frequency in MHz (Mega Hz).
-				  When DDR frequency is less then ddr3_odt_dis_freq,
-				  the ODT on the DRAM side and controller side are
-				  both disabled.
-
-- rockchip,lpddr3_drv :		  When the DRAM type is LPDDR3, this parameter defines
-				  the DRAM side driver strength in ohms. Default
-				  value is 34.
-
-- rockchip,lpddr3_odt :		  When the DRAM type is LPDDR3, this parameter defines
-				  the DRAM side ODT strength in ohms. Default value
-				  is 240.
-
-- rockchip,phy_lpddr3_ca_drv :	  When the DRAM type is LPDDR3, this parameter defines
-				  the PHY side CA line (including command line,
-				  address line and clock line) driver strength.
-				  Default value is 40.
-
-- rockchip,phy_lpddr3_dq_drv :	  When the DRAM type is LPDDR3, this parameter defines
-				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is 40.
-
-- rockchip,phy_lpddr3_odt : 	  When dram type is LPDDR3, this parameter define
-				  the phy side odt strength, default value is 240.
-
-- rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter
-				  defines the ODT disable frequency in
-				  MHz (Mega Hz). When the DDR frequency is less then
-				  ddr3_odt_dis_freq, the ODT on the DRAM side and
-				  controller side are both disabled.
-
-- rockchip,lpddr4_drv :		  When the DRAM type is LPDDR4, this parameter defines
-				  the DRAM side driver strength in ohms. Default
-				  value is 60.
-
-- rockchip,lpddr4_dq_odt : 	  When the DRAM type is LPDDR4, this parameter defines
-				  the DRAM side ODT on DQS/DQ line strength in ohms.
-				  Default value is 40.
-
-- rockchip,lpddr4_ca_odt :	  When the DRAM type is LPDDR4, this parameter defines
-				  the DRAM side ODT on CA line strength in ohms.
-				  Default value is 40.
-
-- rockchip,phy_lpddr4_ca_drv :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side CA line (including command address
-				  line) driver strength. Default value is 40.
-
-- rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side clock line and CS line driver
-				  strength. Default value is 80.
-
-- rockchip,phy_lpddr4_dq_drv :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side DQ line (including DQS/DQ/DM line)
-				  driver strength. Default value is 80.
-
-- rockchip,phy_lpddr4_odt :	  When the DRAM type is LPDDR4, this parameter defines
-				  the PHY side ODT strength. Default value is 60.
-
-Example:
-	dmc_opp_table: dmc_opp_table {
-		compatible = "operating-points-v2";
-
-		opp00 {
-			opp-hz = /bits/ 64 <300000000>;
-			opp-microvolt = <900000>;
-		};
-		opp01 {
-			opp-hz = /bits/ 64 <666000000>;
-			opp-microvolt = <900000>;
-		};
-	};
-
-	dmc: dmc {
-		compatible = "rockchip,rk3399-dmc";
-		devfreq-events = <&dfi>;
-		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_DDRCLK>;
-		clock-names = "dmc_clk";
-		operating-points-v2 = <&dmc_opp_table>;
-		center-supply = <&ppvar_centerlogic>;
-		upthreshold = <15>;
-		downdifferential = <10>;
-		rockchip,ddr3_speed_bin = <21>;
-		rockchip,pd_idle = <0x40>;
-		rockchip,sr_idle = <0x2>;
-		rockchip,sr_mc_gate_idle = <0x3>;
-		rockchip,srpd_lite_idle	= <0x4>;
-		rockchip,standby_idle = <0x2000>;
-		rockchip,dram_dll_dis_freq = <300>;
-		rockchip,phy_dll_dis_freq = <125>;
-		rockchip,auto_pd_dis_freq = <666>;
-		rockchip,ddr3_odt_dis_freq = <333>;
-		rockchip,ddr3_drv = <40>;
-		rockchip,ddr3_odt = <120>;
-		rockchip,phy_ddr3_ca_drv = <40>;
-		rockchip,phy_ddr3_dq_drv = <40>;
-		rockchip,phy_ddr3_odt = <240>;
-		rockchip,lpddr3_odt_dis_freq = <333>;
-		rockchip,lpddr3_drv = <34>;
-		rockchip,lpddr3_odt = <240>;
-		rockchip,phy_lpddr3_ca_drv = <40>;
-		rockchip,phy_lpddr3_dq_drv = <40>;
-		rockchip,phy_lpddr3_odt = <240>;
-		rockchip,lpddr4_odt_dis_freq = <333>;
-		rockchip,lpddr4_drv = <60>;
-		rockchip,lpddr4_dq_odt = <40>;
-		rockchip,lpddr4_ca_odt = <40>;
-		rockchip,phy_lpddr4_ca_drv = <40>;
-		rockchip,phy_lpddr4_ck_cs_drv = <80>;
-		rockchip,phy_lpddr4_dq_drv = <80>;
-		rockchip,phy_lpddr4_odt = <60>;
-	};
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
index 3d8ea3c2d8dd..ba06d1857b7d 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-backend.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Engine Backend Device Tree Bindings
+title: Allwinner A10 Display Engine Backend
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
index e77523b02fad..e6088f379f70 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-engine.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-engine.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Engine Pipeline Device Tree Bindings
+title: Allwinner A10 Display Engine Pipeline
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -62,6 +62,7 @@ properties:
       - allwinner,sun8i-r40-display-engine
       - allwinner,sun8i-v3s-display-engine
       - allwinner,sun9i-a80-display-engine
+      - allwinner,sun20i-d1-display-engine
       - allwinner,sun50i-a64-display-engine
       - allwinner,sun50i-h6-display-engine
 
@@ -69,6 +70,8 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 2
+    items:
+      maxItems: 1
     description: |
       Available display engine frontends (DE 1.0) or mixers (DE
       2.0/3.0) available.
@@ -91,6 +94,7 @@ if:
           - allwinner,sun8i-a83t-display-engine
           - allwinner,sun8i-r40-display-engine
           - allwinner,sun9i-a80-display-engine
+          - allwinner,sun20i-d1-display-engine
           - allwinner,sun50i-a64-display-engine
 
 then:
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
index 055157fbf3bf..98e8240a05bd 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-display-frontend.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Display Engine Frontend Device Tree Bindings
+title: Allwinner A10 Display Engine Frontend
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
index 7f11452539f4..55703caacb9c 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 HDMI Controller Device Tree Bindings
+title: Allwinner A10 HDMI Controller
 
 description: |
   The HDMI Encoder supports the HDMI video and audio outputs, and does
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
index 3a7d5d731712..724d93b9193b 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tcon.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Timings Controller (TCON) Device Tree Bindings
+title: Allwinner A10 Timings Controller (TCON)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -33,6 +33,8 @@ properties:
       - const: allwinner,sun8i-v3s-tcon
       - const: allwinner,sun9i-a80-tcon-lcd
       - const: allwinner,sun9i-a80-tcon-tv
+      - const: allwinner,sun20i-d1-tcon-lcd
+      - const: allwinner,sun20i-d1-tcon-tv
 
       - items:
           - enum:
@@ -231,6 +233,7 @@ allOf:
               - allwinner,sun8i-a83t-tcon-lcd
               - allwinner,sun8i-v3s-tcon
               - allwinner,sun9i-a80-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       properties:
@@ -250,6 +253,7 @@ allOf:
               - allwinner,sun8i-a83t-tcon-tv
               - allwinner,sun8i-r40-tcon-tv
               - allwinner,sun9i-a80-tcon-tv
+              - allwinner,sun20i-d1-tcon-tv
 
     then:
       properties:
@@ -276,6 +280,7 @@ allOf:
               - allwinner,sun9i-a80-tcon-lcd
               - allwinner,sun4i-a10-tcon
               - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       required:
@@ -292,6 +297,7 @@ allOf:
               - allwinner,sun8i-a23-tcon
               - allwinner,sun8i-a33-tcon
               - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
index afc0ed799e0e..c39e90a5945f 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun4i-a10-tv-encoder.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 TV Encoder Device Tree Bindings
+title: Allwinner A10 TV Encoder
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
index 71cce5687580..895506d93f4c 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-drc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 Dynamic Range Controller Device Tree Bindings
+title: Allwinner A31 Dynamic Range Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
index bf0bdf54e5f9..c731fbdc2fe0 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-mipi-dsi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 MIPI-DSI Controller Device Tree Bindings
+title: Allwinner A31 MIPI-DSI Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -12,9 +12,14 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - allwinner,sun6i-a31-mipi-dsi
-      - allwinner,sun50i-a64-mipi-dsi
+    oneOf:
+      - enum:
+          - allwinner,sun6i-a31-mipi-dsi
+          - allwinner,sun50i-a64-mipi-dsi
+          - allwinner,sun50i-a100-mipi-dsi
+      - items:
+          - const: allwinner,sun20i-d1-mipi-dsi
+          - const: allwinner,sun50i-a100-mipi-dsi
 
   reg:
     maxItems: 1
@@ -59,7 +64,6 @@ required:
   - phys
   - phy-names
   - resets
-  - vcc-dsi-supply
   - port
 
 allOf:
@@ -68,7 +72,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: allwinner,sun6i-a31-mipi-dsi
+            enum:
+              - allwinner,sun6i-a31-mipi-dsi
+              - allwinner,sun50i-a100-mipi-dsi
 
     then:
       properties:
@@ -78,16 +84,22 @@ allOf:
       required:
         - clock-names
 
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
   - if:
       properties:
         compatible:
           contains:
-            const: allwinner,sun50i-a64-mipi-dsi
+            enum:
+              - allwinner,sun6i-a31-mipi-dsi
+              - allwinner,sun50i-a64-mipi-dsi
 
     then:
-      properties:
-        clocks:
-          minItems: 1
+      required:
+        - vcc-dsi-supply
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
index 4f91eec26de9..b75c1ec686ad 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-de2-mixer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner Display Engine 2.0 Mixer Device Tree Bindings
+title: Allwinner Display Engine 2.0 Mixer
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -19,6 +19,8 @@ properties:
       - allwinner,sun8i-r40-de2-mixer-0
       - allwinner,sun8i-r40-de2-mixer-1
       - allwinner,sun8i-v3s-de2-mixer
+      - allwinner,sun20i-d1-de2-mixer-0
+      - allwinner,sun20i-d1-de2-mixer-1
       - allwinner,sun50i-a64-de2-mixer-0
       - allwinner,sun50i-a64-de2-mixer-1
       - allwinner,sun50i-h6-de3-mixer-0
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
index 4951b5ef5c6a..60fd927b5a06 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t DWC HDMI TX Encoder Device Tree Bindings
+title: Allwinner A83t DWC HDMI TX Encoder
 
 description: |
   The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
index a97366aaf924..1b47f3d99a78 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-hdmi-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-hdmi-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t HDMI PHY Device Tree Bindings
+title: Allwinner A83t HDMI PHY
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
index 61ef7b337218..7d849c4095a3 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun8i-r40-tcon-top.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner R40 TCON TOP Device Tree Bindings
+title: Allwinner R40 TCON TOP
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -41,6 +41,7 @@ properties:
   compatible:
     enum:
       - allwinner,sun8i-r40-tcon-top
+      - allwinner,sun20i-d1-tcon-top
       - allwinner,sun50i-h6-tcon-top
 
   reg:
@@ -48,31 +49,15 @@ properties:
 
   clocks:
     minItems: 2
-    items:
-      - description: The TCON TOP interface clock
-      - description: The TCON TOP TV0 clock
-      - description: The TCON TOP TVE0 clock
-      - description: The TCON TOP TV1 clock
-      - description: The TCON TOP TVE1 clock
-      - description: The TCON TOP MIPI DSI clock
+    maxItems: 6
 
   clock-names:
     minItems: 2
-    items:
-      - const: bus
-      - const: tcon-tv0
-      - const: tve0
-      - const: tcon-tv1
-      - const: tve1
-      - const: dsi
+    maxItems: 6
 
   clock-output-names:
     minItems: 1
     maxItems: 3
-    description: >
-      The first item is the name of the clock created for the TV0
-      channel, the second item is the name of the TCON TV1 channel
-      clock and the third one is the name of the DSI channel clock.
 
   resets:
     maxItems: 1
@@ -129,32 +114,92 @@ required:
 
 additionalProperties: false
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: allwinner,sun50i-h6-tcon-top
-
-then:
-  properties:
-    clocks:
-      maxItems: 2
-
-    clock-output-names:
-      maxItems: 1
-
-else:
-  properties:
-    clocks:
-      minItems: 6
-
-    clock-output-names:
-      minItems: 3
-
-    ports:
-      required:
-        - port@2
-        - port@3
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun8i-r40-tcon-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The TCON TOP interface clock
+            - description: The TCON TOP TV0 clock
+            - description: The TCON TOP TVE0 clock
+            - description: The TCON TOP TV1 clock
+            - description: The TCON TOP TVE1 clock
+            - description: The TCON TOP MIPI DSI clock
+
+        clock-names:
+          items:
+            - const: bus
+            - const: tcon-tv0
+            - const: tve0
+            - const: tcon-tv1
+            - const: tve1
+            - const: dsi
+
+        clock-output-names:
+          items:
+            - description: TCON TV0 output clock name
+            - description: TCON TV1 output clock name
+            - description: DSI output clock name
+
+        ports:
+          required:
+            - port@2
+            - port@3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun20i-d1-tcon-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The TCON TOP interface clock
+            - description: The TCON TOP TV0 clock
+            - description: The TCON TOP TVE0 clock
+            - description: The TCON TOP MIPI DSI clock
+
+        clock-names:
+          items:
+            - const: bus
+            - const: tcon-tv0
+            - const: tve0
+            - const: dsi
+
+        clock-output-names:
+          items:
+            - description: TCON TV0 output clock name
+            - description: DSI output clock name
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: allwinner,sun50i-h6-tcon-top
+
+    then:
+      properties:
+        clocks:
+          items:
+            - description: The TCON TOP interface clock
+            - description: The TCON TOP TV0 clock
+
+        clock-names:
+          items:
+            - const: bus
+            - const: tcon-tv0
+
+        clock-output-names:
+          items:
+            - description: TCON TV0 output clock name
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
index 637372ec4614..193afee2c3c1 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/allwinner,sun9i-a80-deu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A80 Detail Enhancement Unit Device Tree Bindings
+title: Allwinner A80 Detail Enhancement Unit
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index cf5a208f2f10..0c85894648d8 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -2,13 +2,16 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/amlogic,meson-dw-hdmi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/amlogic,meson-dw-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: /schemas/sound/dai-common.yaml#
 
 description: |
   The Amlogic Meson Synopsys Designware Integration is composed of
@@ -99,6 +102,8 @@ properties:
   "#sound-dai-cells":
     const: 0
 
+  sound-name-prefix: true
+
 required:
   - compatible
   - reg
@@ -145,4 +150,3 @@ examples:
              };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index 851cb0781217..0c72120acc4f 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -2,13 +2,13 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/amlogic,meson-vpu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/amlogic,meson-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson Display Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic Meson Display controller is composed of several components
@@ -78,6 +78,10 @@ properties:
   interrupts:
     maxItems: 1
 
+  amlogic,canvas:
+    description: should point to a canvas provider node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   power-domains:
     maxItems: 1
     description: phandle to the associated power domain
@@ -106,6 +110,7 @@ required:
   - port@1
   - "#address-cells"
   - "#size-cells"
+  - amlogic,canvas
 
 additionalProperties: false
 
@@ -118,6 +123,7 @@ examples:
         interrupts = <3>;
         #address-cells = <1>;
         #size-cells = <0>;
+        amlogic,canvas = <&canvas>;
 
         /* CVBS VDAC output port */
         port@0 {
diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.txt b/Documentation/devicetree/bindings/display/arm,hdlcd.txt
deleted file mode 100644
index 78bc24296f3e..000000000000
--- a/Documentation/devicetree/bindings/display/arm,hdlcd.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-ARM HDLCD
-
-This is a display controller found on several development platforms produced
-by ARM Ltd and in more modern of its' Fast Models. The HDLCD is an RGB
-streamer that reads the data from a framebuffer and sends it to a single
-digital encoder (DVI or HDMI).
-
-Required properties:
-  - compatible: "arm,hdlcd"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: One interrupt used by the display controller to notify the
-    interrupt controller when any of the interrupt sources programmed in
-    the interrupt mask register have activated.
-  - clocks: A list of phandle + clock-specifier pairs, one for each
-    entry in 'clock-names'.
-  - clock-names: A list of clock names. For HDLCD it should contain:
-      - "pxlclk" for the clock feeding the output PLL of the controller.
-
-Required sub-nodes:
-  - port: The HDLCD connection to an encoder chip. The connection is modeled
-    using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt.
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be
-    used for the framebuffer; if not present, the framebuffer may be located
-    anywhere in memory.
-
-
-Example:
-
-/ {
-	...
-
-	hdlcd@2b000000 {
-		compatible = "arm,hdlcd";
-		reg = <0 0x2b000000 0 0x1000>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&oscclk5>;
-		clock-names = "pxlclk";
-		port {
-			hdlcd_output: endpoint@0 {
-				remote-endpoint = <&hdmi_enc_input>;
-			};
-		};
-	};
-
-	/* HDMI encoder on I2C bus */
-	i2c@7ffa0000 {
-		....
-		hdmi-transmitter@70 {
-			compatible = ".....";
-			reg = <0x70>;
-			port@0 {
-				hdmi_enc_input: endpoint {
-					remote-endpoint = <&hdlcd_output>;
-				};
-
-				hdmi_enc_output: endpoint {
-					remote-endpoint = <&hdmi_1_port>;
-				};
-			};
-		};
-
-	};
-
-	hdmi1: connector@1 {
-		compatible = "hdmi-connector";
-		type = "a";
-		port {
-			hdmi_1_port: endpoint {
-				remote-endpoint = <&hdmi_enc_output>;
-			};
-		};
-	};
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.yaml b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml
new file mode 100644
index 000000000000..9a30e9005e8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,hdlcd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm HDLCD display controller
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm HDLCD is a display controller found on several development platforms
+  produced by ARM Ltd and in more modern of its Fast Models. The HDLCD is an
+  RGB streamer that reads the data from a framebuffer and sends it to a single
+  digital encoder (DVI or HDMI).
+
+properties:
+  compatible:
+    const: arm,hdlcd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    const: pxlclk
+
+  clocks:
+    maxItems: 1
+    description: The input reference for the pixel clock.
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  iommus:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - port
+
+examples:
+  - |
+    hdlcd@2b000000 {
+        compatible = "arm,hdlcd";
+        reg = <0x2b000000 0x1000>;
+        interrupts = <0 85 4>;
+        clocks = <&oscclk5>;
+        clock-names = "pxlclk";
+        port {
+            hdlcd_output: endpoint {
+                remote-endpoint = <&hdmi_enc_input>;
+            };
+        };
+    };
+
+    /* HDMI encoder on I2C bus */
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hdmi-transmitter@70 {
+            compatible = "nxp,tda998x";
+            reg = <0x70>;
+            port {
+                hdmi_enc_input: endpoint {
+                    remote-endpoint = <&hdlcd_output>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt
deleted file mode 100644
index 8513695ee47f..000000000000
--- a/Documentation/devicetree/bindings/display/arm,komeda.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Device Tree bindings for Arm Komeda display driver
-
-Required properties:
-- compatible: Should be "arm,mali-d71"
-- reg: Physical base address and length of the registers in the system
-- interrupts: the interrupt line number of the device in the system
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-- clock-names: A list of clock names. It should contain:
-      - "aclk": for the main processor clock
-- #address-cells: Must be 1
-- #size-cells: Must be 0
-- iommus: configure the stream id to IOMMU, Must be configured if want to
-    enable iommu in display. for how to configure this node please reference
-        devicetree/bindings/iommu/arm,smmu-v3.txt,
-        devicetree/bindings/iommu/iommu.txt
-
-Required properties for sub-node: pipeline@nq
-Each device contains one or two pipeline sub-nodes (at least one), each
-pipeline node should provide properties:
-- reg: Zero-indexed identifier for the pipeline
-- clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-- clock-names: should contain:
-      - "pxclk": pixel clock
-
-- port: each pipeline connect to an encoder input port. The connection is
-    modeled using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-    to be used for the framebuffer; if not present, the framebuffer may
-    be located anywhere in memory.
-
-Example:
-/ {
-	...
-
-	dp0: display@c00000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "arm,mali-d71";
-		reg = <0xc00000 0x20000>;
-		interrupts = <0 168 4>;
-		clocks = <&dpu_aclk>;
-		clock-names = "aclk";
-		iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
-			<&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
-			<&smmu 8>, <&smmu 9>;
-
-		dp0_pipe0: pipeline@0 {
-			clocks = <&fpgaosc2>;
-			clock-names = "pxclk";
-			reg = <0>;
-
-			port {
-				dp0_pipe0_out: endpoint {
-					remote-endpoint = <&db_dvi0_in>;
-				};
-			};
-		};
-
-		dp0_pipe1: pipeline@1 {
-			clocks = <&fpgaosc2>;
-			clock-names = "pxclk";
-			reg = <1>;
-
-			port {
-				dp0_pipe1_out: endpoint {
-					remote-endpoint = <&db_dvi1_in>;
-				};
-			};
-		};
-	};
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,komeda.yaml b/Documentation/devicetree/bindings/display/arm,komeda.yaml
new file mode 100644
index 000000000000..3ad3eef89ca8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,komeda.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,komeda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Komeda display processor
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm Mali D71 display processor supports up to two displays with up
+  to a 4K resolution each. Each pipeline can be composed of up to four
+  layers. It is typically connected to a digital display connector like HDMI.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: arm,mali-d32
+          - const: arm,mali-d71
+      - const: arm,mali-d71
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    const: aclk
+
+  clocks:
+    maxItems: 1
+    description: The main DPU processor clock
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  iommus:
+    description:
+      The stream IDs for each of the used pipelines, each four IDs for the
+      four layers, plus one for the write-back stream.
+    minItems: 5
+    maxItems: 10
+
+patternProperties:
+  '^pipeline@[01]$':
+    type: object
+    additionalProperties: false
+    description:
+      clocks
+
+    properties:
+      reg:
+        enum: [ 0, 1 ]
+
+      clock-names:
+        const: pxclk
+
+      clocks:
+        maxItems: 1
+        description: The input reference for the pixel clock.
+
+      port:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - pipeline@0
+
+examples:
+  - |
+    display@c00000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "arm,mali-d71";
+        reg = <0xc00000 0x20000>;
+        interrupts = <168>;
+        clocks = <&dpu_aclk>;
+        clock-names = "aclk";
+        iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>,
+                 <&smmu 8>,
+                 <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>,
+                 <&smmu 9>;
+
+        dp0_pipe0: pipeline@0 {
+            clocks = <&fpgaosc2>;
+            clock-names = "pxclk";
+            reg = <0>;
+
+            port {
+                dp0_pipe0_out: endpoint {
+                    remote-endpoint = <&db_dvi0_in>;
+                };
+            };
+        };
+
+        dp0_pipe1: pipeline@1 {
+            clocks = <&fpgaosc2>;
+            clock-names = "pxclk";
+            reg = <1>;
+
+            port {
+                dp0_pipe1_out: endpoint {
+                    remote-endpoint = <&db_dvi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
deleted file mode 100644
index 7a97a2b48c2a..000000000000
--- a/Documentation/devicetree/bindings/display/arm,malidp.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-ARM Mali-DP
-
-The following bindings apply to a family of Display Processors sold as
-licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
-DP650 processors that offer multiple composition layers, support for
-rotation and scaling output.
-
-Required properties:
-  - compatible: should be one of
-	"arm,mali-dp500"
-	"arm,mali-dp550"
-	"arm,mali-dp650"
-    depending on the particular implementation present in the hardware
-  - reg: Physical base address and size of the block of registers used by
-    the processor.
-  - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt,
-    interrupt client nodes.
-  - interrupt-names: name of the engine inside the processor that will
-    use the corresponding interrupt. Should be one of "DE" or "SE".
-  - clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-  - clock-names: A list of clock names. It should contain:
-      - "pclk": for the APB interface clock
-      - "aclk": for the AXI interface clock
-      - "mclk": for the main processor clock
-      - "pxlclk": for the pixel clock feeding the output PLL of the processor.
-  - arm,malidp-output-port-lines: Array of u8 values describing the number
-    of output lines per channel (R, G and B).
-
-Required sub-nodes:
-  - port: The Mali DP connection to an encoder input port. The connection
-    is modelled using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-    to be used for the framebuffer; if not present, the framebuffer may
-    be located anywhere in memory.
-  - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS
-    levels of DP500's QoS signaling.
-
-
-Example:
-
-/ {
-	...
-
-	dp0: malidp@6f200000 {
-		compatible = "arm,mali-dp650";
-		reg = <0 0x6f200000 0 0x20000>;
-		memory-region = <&display_reserved>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 168 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "DE", "SE";
-		clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
-		clock-names = "pxlclk", "mclk", "aclk", "pclk";
-		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
-		arm,malidp-arqos-high-level = <0xd000d000>;
-		port {
-			dp0_output: endpoint {
-				remote-endpoint = <&tda998x_2_input>;
-			};
-		};
-	};
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml
new file mode 100644
index 000000000000..91812573fd08
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,malidp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Mali Display Processor (Mali-DP)
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The following bindings apply to a family of Display Processors sold as
+  licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
+  DP650 processors that offer multiple composition layers, support for
+  rotation and scaling output.
+
+properties:
+  compatible:
+    enum:
+      - arm,mali-dp500
+      - arm,mali-dp550
+      - arm,mali-dp650
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description:
+          The interrupt used by the Display Engine (DE). Can be shared with
+          the interrupt for the Scaling Engine (SE), but it will have to be
+          listed individually.
+      - description:
+          The interrupt used by the Scaling Engine (SE). Can be shared with
+          the interrupt for the Display Engine (DE), but it will have to be
+          listed individually.
+
+  interrupt-names:
+    items:
+      - const: DE
+      - const: SE
+
+  clock-names:
+    items:
+      - const: pxlclk
+      - const: mclk
+      - const: aclk
+      - const: pclk
+
+  clocks:
+    items:
+      - description: the pixel clock feeding the output PLL of the processor
+      - description: the main processor clock
+      - description: the AXI interface clock
+      - description: the APB interface clock
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  arm,malidp-output-port-lines:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Number of output lines/bits for each colour channel.
+    items:
+      - description: number of output lines for the red channel (R)
+      - description: number of output lines for the green channel (G)
+      - description: number of output lines for the blue channel (B)
+
+  arm,malidp-arqos-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Quality-of-Service value for the display engine FIFOs, to write
+      into the RQOS register of the DP500.
+      See the ARM Mali-DP500 TRM for details on the encoding.
+      If omitted, the RQOS register will not be changed.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - port
+  - arm,malidp-output-port-lines
+
+examples:
+  - |
+    dp0: malidp@6f200000 {
+        compatible = "arm,mali-dp650";
+        reg = <0x6f200000 0x20000>;
+        memory-region = <&display_reserved>;
+        interrupts = <168>, <168>;
+        interrupt-names = "DE", "SE";
+        clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
+        clock-names = "pxlclk", "mclk", "aclk", "pclk";
+        arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+        arm,malidp-arqos-value = <0xd000d000>;
+
+        port {
+            dp0_output: endpoint {
+                remote-endpoint = <&tda998x_2_input>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt
deleted file mode 100644
index 3f977e72a200..000000000000
--- a/Documentation/devicetree/bindings/display/arm,pl11x.txt
+++ /dev/null
@@ -1,110 +0,0 @@
-* ARM PrimeCell Color LCD Controller PL110/PL111
-
-See also Documentation/devicetree/bindings/arm/primecell.yaml
-
-Required properties:
-
-- compatible: must be one of:
-	"arm,pl110", "arm,primecell"
-	"arm,pl111", "arm,primecell"
-
-- reg: base address and size of the control registers block
-
-- interrupt-names: either the single entry "combined" representing a
-	combined interrupt output (CLCDINTR), or the four entries
-	"mbe", "vcomp", "lnbu", "fuf" representing the individual
-	CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts
-
-- interrupts: contains an interrupt specifier for each entry in
-	interrupt-names
-
-- clock-names: should contain "clcdclk" and "apb_pclk"
-
-- clocks: contains phandle and clock specifier pairs for the entries
-	in the clock-names property. See
-	Documentation/devicetree/bindings/clock/clock-bindings.txt
-
-Optional properties:
-
-- memory-region: phandle to a node describing memory (see
-	Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-	to be used for the framebuffer; if not present, the framebuffer
-	may be located anywhere in the memory
-
-- max-memory-bandwidth: maximum bandwidth in bytes per second that the
-	cell's memory interface can handle; if not present, the memory
-	interface is fast enough to handle all possible video modes
-
-Required sub-nodes:
-
-- port: describes LCD panel signals, following the common binding
-	for video transmitter interfaces; see
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Deprecated properties:
-	The port's endbpoint subnode had this, now deprecated property
-	in the past. Drivers should be able to survive without it:
-
-	- arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values,
-		defining the way CLD pads are wired up; first value
-		contains index of the "CLD" external pin (pad) used
-		as R0 (first bit of the red component), second value
-	        index of the pad used as G0, third value index of the
-		pad used as B0, see also "LCD panel signal multiplexing
-		details" paragraphs in the PL110/PL111 Technical
-		Reference Manuals; this implicitly defines available
-		color modes, for example:
-		- PL111 TFT 4:4:4 panel:
-			arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
-		- PL110 TFT (1:)5:5:5 panel:
-			arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
-		- PL111 TFT (1:)5:5:5 panel:
-			arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
-		- PL111 TFT 5:6:5 panel:
-			arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
-		- PL110 and PL111 TFT 8:8:8 panel:
-			arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
-		- PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
-			arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
-
-
-Example:
-
-	clcd@10020000 {
-		compatible = "arm,pl111", "arm,primecell";
-		reg = <0x10020000 0x1000>;
-		interrupt-names = "combined";
-		interrupts = <0 44 4>;
-		clocks = <&oscclk1>, <&oscclk2>;
-		clock-names = "clcdclk", "apb_pclk";
-		max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
-
-		port {
-			clcd_pads: endpoint {
-				remote-endpoint = <&clcd_panel>;
-			};
-		};
-
-	};
-
-	panel {
-		compatible = "panel-dpi";
-
-		port {
-			clcd_panel: endpoint {
-				remote-endpoint = <&clcd_pads>;
-			};
-		};
-
-		panel-timing {
-			clock-frequency = <25175000>;
-			hactive = <640>;
-			hback-porch = <40>;
-			hfront-porch = <24>;
-			hsync-len = <96>;
-			vactive = <480>;
-			vback-porch = <32>;
-			vfront-porch = <11>;
-			vsync-len = <2>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.yaml b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
new file mode 100644
index 000000000000..6cc9045e5c68
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,pl11x.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,pl11x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm PrimeCell Color LCD Controller PL110/PL111
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The Arm Primcell PL010/PL111 is an LCD controller IP, than scans out
+  a framebuffer region in system memory, and creates timed signals for
+  a variety of LCD panels.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl110
+          - arm,pl111
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,pl110
+          - arm,pl111
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupt-names:
+    oneOf:
+      - const: combined
+        description:
+          The IP provides four individual interrupt lines, but also one
+          combined line. If the integration only connects this line to the
+          interrupt controller, this single interrupt is noted here.
+      - items:
+          - const: mbe        # CLCDMBEINTR
+          - const: vcomp      # CLCDVCOMPINTR
+          - const: lnbu       # CLCDLNBUINTR
+          - const: fuf        # CLCDFUFINTR
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: clcdclk
+      - const: apb_pclk
+
+  clocks:
+    items:
+      - description: The CLCDCLK reference clock for the controller.
+      - description: The HCLK AHB slave clock for the register access.
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  max-memory-bandwidth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Maximum bandwidth in bytes per second that the cell's memory interface
+      can handle.
+      If not present, the memory interface is fast enough to handle all
+      possible video modes.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+    properties:
+      endpoint:
+        $ref: /schemas/graph.yaml#/$defs/endpoint-base
+        unevaluatedProperties: false
+
+        properties:
+          arm,pl11x,tft-r0g0b0-pads:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            items:
+              - description: index of CLD pad used for first red bit (R0)
+              - description: index of CLD pad used for first green bit (G0)
+              - description: index of CLD pad used for first blue bit (G0)
+            deprecated: true
+            description: |
+              DEPRECATED. An array of three 32-bit values, defining the way
+              CLD[23:0] pads are wired up.
+              The first value contains the index of the "CLD" external pin (pad)
+              used as R0 (first bit of the red component), the second value for
+              green, the third value for blue.
+              See also "LCD panel signal multiplexing details" paragraphs in the
+              PL110/PL111 Technical Reference Manuals.
+              This implicitly defines available color modes, for example:
+              - PL111 TFT 4:4:4 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <4 15 20>;
+              - PL110 TFT (1:)5:5:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <1 7 13>;
+              - PL111 TFT (1:)5:5:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <3 11 19>;
+              - PL111 TFT 5:6:5 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <3 10 19>;
+              - PL110 and PL111 TFT 8:8:8 panel:
+                  arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+              - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped:
+                  arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - port
+
+allOf:
+  - if:
+      properties:
+        interrupts:
+          minItems: 2
+      required:
+        - interrupts
+    then:
+      required:
+        - interrupt-names
+
+examples:
+  - |
+    clcd@10020000 {
+        compatible = "arm,pl111", "arm,primecell";
+        reg = <0x10020000 0x1000>;
+        interrupt-names = "combined";
+        interrupts = <44>;
+        clocks = <&oscclk1>, <&oscclk2>;
+        clock-names = "clcdclk", "apb_pclk";
+        max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */
+
+        port {
+            clcd_pads: endpoint {
+                remote-endpoint = <&clcd_panel>;
+            };
+        };
+    };
+
+    panel {
+        compatible = "arm,rtsm-display";
+
+        port {
+            clcd_panel: endpoint {
+                remote-endpoint = <&clcd_pads>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt
index acb5a0132127..b5e355ada2fa 100644
--- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt
+++ b/Documentation/devicetree/bindings/display/atmel,lcdc.txt
@@ -9,7 +9,6 @@ Required properties:
 	"atmel,at91sam9g45-lcdc" ,
 	"atmel,at91sam9g45es-lcdc" ,
 	"atmel,at91sam9rl-lcdc" ,
-	"atmel,at32ap-lcdc"
 - reg : Should contain 1 register ranges(address and length).
 	Can contain an additional register range(address and length)
 	for fixed framebuffer memory. Useful for dedicated memories.
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
index a1d5a32660e0..5b35adf34c7b 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/brcm,bcm2711-hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM2711 HDMI Controller Device Tree Bindings
+title: Broadcom BCM2711 HDMI Controller
 
 maintainers:
   - Eric Anholt <eric@anholt.net>
@@ -72,8 +72,7 @@ properties:
       - const: hpd-removed
 
   ddc:
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/phandle
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: >
       Phandle of the I2C controller used for DDC EDID probing
 
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
index 32608578a352..c8b2459d64f6 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
@@ -47,6 +47,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
 required:
   - "#clock-cells"
   - compatible
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
index 031e35e76db2..48c8cad0d96d 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
@@ -51,6 +51,9 @@ properties:
   dma-names:
     const: audio-rx
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml
index 8a73780f573d..c55a8217de25 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml
@@ -24,6 +24,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml
index 9b24081a0dbd..5d921e30394e 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml
@@ -24,6 +24,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
index d3dd7a79b909..5bbe81862c8f 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
@@ -76,9 +76,8 @@ properties:
 
   adi,input-depth:
     description: Number of bits per color component at the input.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [ 8, 10, 12 ]
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 10, 12 ]
 
   adi,input-colorspace:
     description: Input color space.
@@ -118,23 +117,21 @@ properties:
 
   ports:
     description:
-      The ADV7511(W)/13 has two video ports and one audio port. This node
-      models their connections as documented in
-      Documentation/devicetree/bindings/media/video-interfaces.txt
-      Documentation/devicetree/bindings/graph.txt
-    type: object
+      The ADV7511(W)/13 has two video ports and one audio port.
+    $ref: /schemas/graph.yaml#/properties/ports
+
     properties:
       port@0:
         description: Video port for the RGB or YUV input.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@1:
         description: Video port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@2:
         description: Audio port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
 # adi,input-colorspace and adi,input-clock are required except in
 # "rgb 1x" and "yuv444 1x" modes, in which case they must not be
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
index f36209137c8a..987aa83c2649 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml
@@ -91,25 +91,23 @@ properties:
 
   ports:
     description:
-      The ADV7533/35 has two video ports and one audio port. This node
-      models their connections as documented in
-      Documentation/devicetree/bindings/media/video-interfaces.txt
-      Documentation/devicetree/bindings/graph.txt
-    type: object
+      The ADV7533/35 has two video ports and one audio port.
+    $ref: /schemas/graph.yaml#/properties/ports
+
     properties:
       port@0:
         description:
           Video port for the DSI input. The remote endpoint phandle
           should be a reference to a valid mipi_dsi_host_device.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@1:
         description: Video port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
       port@2:
         description: Audio port for the HDMI output.
-        type: object
+        $ref: /schemas/graph.yaml#/properties/port
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
index ab48ab2f4240..a1ed1004651b 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Analogix Semiconductor, Inc.
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/bridge/analogix,anx7625.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter)
 
@@ -16,8 +16,7 @@ description: |
 
 properties:
   compatible:
-    items:
-      - const: analogix,anx7625
+    const: analogix,anx7625
 
   reg:
     maxItems: 1
@@ -43,14 +42,73 @@ properties:
   vdd33-supply:
     description: Regulator that provides the supply 3.3V power.
 
+  analogix,lane0-swing:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 20
+    description:
+      an array of swing register setting for DP tx lane0 PHY.
+      Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+      Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and
+      [Swing control] setting.
+      Registers 0~9, bit 3:0 is [Boost control], these bits control
+      post cursor manual, increase the [Boost control] to increase
+      Pre-emphasis value.
+      Registers 0~9, bit 6:4 is [Swing control], these bits control
+      swing manual, increase [Swing control] setting to add Vp-p value
+      for each Swing, Pre.
+      Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0,
+      Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2,
+      Swing1_Pre2, Swing0_Pre3, they are for [R select control] and
+      [R Termination control] setting.
+      Registers 10~19, bit 4:0 is [R select control], these bits are
+      compensation manual, increase it can enhance IO driven strength
+      and Vp-p.
+      Registers 10~19, bit 5:6 is [R termination control], these bits
+      adjust 50ohm impedance of DP tx termination. 00:55 ohm,
+      01:50 ohm(default), 10:45 ohm, 11:40 ohm.
+
+  analogix,lane1-swing:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 20
+    description:
+      an array of swing register setting for DP tx lane1 PHY.
+      DP TX lane1 swing register setting same with lane0
+      swing, please refer lane0-swing property description.
+
+  analogix,audio-enable:
+    type: boolean
+    description: let the driver enable audio HDMI codec function or not.
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description:
-          Video port for MIPI DSI input.
+          MIPI DSI/DPI input.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            type: object
+            additionalProperties: false
+
+            properties:
+              remote-endpoint: true
+
+              bus-type:
+                enum: [7]
+                default: 1
+
+              data-lanes: true
 
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
@@ -75,7 +133,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -87,6 +145,9 @@ examples:
             vdd10-supply = <&pp1000_mipibrdg>;
             vdd18-supply = <&pp1800_mipibrdg>;
             vdd33-supply = <&pp3300_mipibrdg>;
+            analogix,audio-enable;
+            analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
+            analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>;
 
             ports {
                 #address-cells = <1>;
@@ -96,6 +157,8 @@ examples:
                     reg = <0>;
                     anx7625_in: endpoint {
                         remote-endpoint = <&mipi_dsi>;
+                        bus-type = <7>;
+                        data-lanes = <0 1 2 3>;
                     };
                 };
 
@@ -106,5 +169,19 @@ examples:
                     };
                 };
             };
+
+            aux-bus {
+                panel {
+                    compatible = "innolux,n125hce-gn1";
+                    power-supply = <&pp3300_disp_x>;
+                    backlight = <&backlight_lcd0>;
+
+                    port {
+                        panel_in: endpoint {
+                            remote-endpoint = <&anx7625_out>;
+                        };
+                    };
+                };
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
index 8e13f27b28ed..4a5e5d9d6f90 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
 
 maintainers:
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+  - Andrzej Hajda <andrzej.hajda@intel.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Robert Foss <robert.foss@linaro.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
new file mode 100644
index 000000000000..c9b06885cc63
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/analogix,dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analogix Display Port bridge
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks: true
+
+  clock-names: true
+
+  phys: true
+
+  phy-names:
+    const: dp
+
+  force-hpd:
+    description:
+      Indicate driver need force hpd when hpd detect failed, this
+      is used for some eDP screen which don not have a hpd signal.
+
+  hpd-gpios:
+    description:
+      Hotplug detect GPIO.
+      Indicates which GPIO should be used for hotplug detection
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input node to receive pixel data.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Port node with one endpoint connected to a dp-connector node.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - reg
+  - interrupts
+  - clock-names
+  - clocks
+  - ports
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
deleted file mode 100644
index 027d76c27a41..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Analogix Display Port bridge bindings
-
-Required properties for dp-controller:
-	-compatible:
-		platform specific such as:
-		 * "samsung,exynos5-dp"
-		 * "rockchip,rk3288-dp"
-		 * "rockchip,rk3399-edp"
-	-reg:
-		physical base address of the controller and length
-		of memory mapped region.
-	-interrupts:
-		interrupt combiner values.
-	-clocks:
-		from common clock binding: handle to dp clock.
-	-clock-names:
-		from common clock binding: Shall be "dp".
-	-phys:
-		from general PHY binding: the phandle for the PHY device.
-	-phy-names:
-		from general PHY binding: Should be "dp".
-
-Optional properties for dp-controller:
-	-force-hpd:
-		Indicate driver need force hpd when hpd detect failed, this
-		is used for some eDP screen which don't have hpd signal.
-	-hpd-gpios:
-		Hotplug detect GPIO.
-		Indicates which GPIO should be used for hotplug detection
-	-port@[X]: SoC specific port nodes with endpoint definitions as defined
-		in Documentation/devicetree/bindings/media/video-interfaces.txt,
-		please refer to the SoC specific binding document:
-		* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
-		* Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
--------------------------------------------------------------------------------
-
-Example:
-
-	dp-controller {
-		compatible = "samsung,exynos5-dp";
-		reg = <0x145b0000 0x10000>;
-		interrupts = <10 3>;
-		interrupt-parent = <&combiner>;
-		clocks = <&clock 342>;
-		clock-names = "dp";
-
-		phys = <&dp_phy>;
-		phy-names = "dp";
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
index 1c0406c38fe5..514f58852990 100644
--- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/anx6345.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analogix ANX6345 eDP Transmitter Device Tree Bindings
+title: Analogix ANX6345 eDP Transmitter
 
 maintainers:
   - Torsten Duwe <duwe@lst.de>
@@ -61,7 +61,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
deleted file mode 100644
index 525a4bfd8634..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
+++ /dev/null
@@ -1,112 +0,0 @@
-Cadence DSI bridge
-==================
-
-The Cadence DSI bridge is a DPI to DSI bridge supporting up to 4 DSI lanes.
-
-Required properties:
-- compatible: should be set to "cdns,dsi".
-- reg: physical base address and length of the controller's registers.
-- interrupts: interrupt line connected to the DSI bridge.
-- clocks: DSI bridge clocks.
-- clock-names: must contain "dsi_p_clk" and "dsi_sys_clk".
-- phys: phandle link to the MIPI D-PHY controller.
-- phy-names: must contain "dphy".
-- #address-cells: must be set to 1.
-- #size-cells: must be set to 0.
-
-Optional properties:
-- resets: DSI reset lines.
-- reset-names: can contain "dsi_p_rst".
-
-Required subnodes:
-- ports: Ports as described in Documentation/devicetree/bindings/graph.txt.
-  2 ports are available:
-  * port 0: this port is only needed if some of your DSI devices are
-	    controlled through  an external bus like I2C or SPI. Can have at
-	    most 4 endpoints. The endpoint number is directly encoding the
-	    DSI virtual channel used by this device.
-  * port 1: represents the DPI input.
-  Other ports will be added later to support the new kind of inputs.
-
-- one subnode per DSI device connected on the DSI bus. Each DSI device should
-  contain a reg property encoding its virtual channel.
-
-Example:
-	dsi0: dsi@fd0c0000 {
-		compatible = "cdns,dsi";
-		reg = <0x0 0xfd0c0000 0x0 0x1000>;
-		clocks = <&pclk>, <&sysclk>;
-		clock-names = "dsi_p_clk", "dsi_sys_clk";
-		interrupts = <1>;
-		phys = <&dphy0>;
-		phy-names = "dphy";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-				dsi0_dpi_input: endpoint {
-					remote-endpoint = <&xxx_dpi_output>;
-				};
-			};
-		};
-
-		panel: dsi-dev@0 {
-			compatible = "<vendor,panel>";
-			reg = <0>;
-		};
-	};
-
-or
-
-	dsi0: dsi@fd0c0000 {
-		compatible = "cdns,dsi";
-		reg = <0x0 0xfd0c0000 0x0 0x1000>;
-		clocks = <&pclk>, <&sysclk>;
-		clock-names = "dsi_p_clk", "dsi_sys_clk";
-		interrupts = <1>;
-		phys = <&dphy1>;
-		phy-names = "dphy";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				dsi0_output: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&dsi_panel_input>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				dsi0_dpi_input: endpoint {
-					remote-endpoint = <&xxx_dpi_output>;
-				};
-			};
-		};
-	};
-
-	i2c@xxx {
-		panel: panel@59 {
-			compatible = "<vendor,panel>";
-			reg = <0x59>;
-
-			port {
-				dsi_panel_input: endpoint {
-					remote-endpoint = <&dsi0_output>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml
new file mode 100644
index 000000000000..23060324d16e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/cdns,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence DSI bridge
+
+maintainers:
+  - Boris Brezillon <boris.brezillon@bootlin.com>
+
+description: |
+   CDNS DSI is a bridge device which converts DPI to DSI
+
+properties:
+  compatible:
+    enum:
+      - cdns,dsi
+      - ti,j721e-dsi
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          Register block for controller's registers.
+      - description:
+          Register block for wrapper settings registers in case of TI J7 SoCs.
+
+  clocks:
+    items:
+      - description: PSM clock, used by the IP
+      - description: sys clock, used by the IP
+
+  clock-names:
+    items:
+      - const: dsi_p_clk
+      - const: dsi_sys_clk
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dphy
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: dsi_p_rst
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port representing the DSI output. It can have
+          at most 4 endpoints. The endpoint number is directly encoding
+          the DSI virtual channel used by this device.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port representing the DPI input.
+
+    required:
+      - port@1
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-dsi
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        power-domains:
+          maxItems: 1
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsi@fd0c0000 {
+            compatible = "cdns,dsi";
+            reg = <0x0 0xfd0c0000 0x0 0x1000>;
+            clocks = <&pclk>, <&sysclk>;
+            clock-names = "dsi_p_clk", "dsi_sys_clk";
+            interrupts = <1>;
+            phys = <&dphy0>;
+            phy-names = "dphy";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&xxx_dpi_output>;
+                    };
+                };
+            };
+
+            panel@0 {
+                compatible = "panasonic,vvx10f034n00";
+                reg = <0>;
+                power-supply = <&vcc_lcd_reg>;
+            };
+        };
+    };
+
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsi@fd0c0000 {
+            compatible = "cdns,dsi";
+            reg = <0x0 0xfd0c0000 0x0 0x1000>;
+            clocks = <&pclk>, <&sysclk>;
+            clock-names = "dsi_p_clk", "dsi_sys_clk";
+            interrupts = <1>;
+            phys = <&dphy1>;
+            phy-names = "dphy";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&dsi_panel_input>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                        remote-endpoint = <&xxx_dpi_output>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
index b2e8bc6da9d0..c2b369456e4e 100644
--- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/bridge/cdns,mhdp8546.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Cadence MHDP8546 bridge
 
diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
index 62c3bd4cb28d..5fb54375aeb6 100644
--- a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
@@ -24,6 +24,15 @@ properties:
     maxItems: 1
     description: virtual channel number of a DSI peripheral
 
+  clock-names:
+    const: refclk
+
+  clocks:
+    maxItems: 1
+    description: |
+        Optional external clock connected to REF_CLK input.
+        The clock rate must be in 10..154 MHz range.
+
   enable-gpios:
     description: Bridge EN pin, chip is reset when EN is low.
 
@@ -41,17 +50,32 @@ properties:
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description:
           Video port for MIPI DSI input
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description:
           Video port for MIPI DPI output (panel or connector).
 
     required:
-      - port@0
       - port@1
 
 required:
diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
index bb6289c7d375..b0589fa16736 100644
--- a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/display/bridge/chrontel,ch7033.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Chrontel CH7033 Video Encoder Device Tree Bindings
+title: Chrontel CH7033 Video Encoder
 
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
new file mode 100644
index 000000000000..94543006f5de
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp LVDS Display Bridge
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels.
+
+  The i.MX8qm/qxp LDB is controlled by Control and Status Registers(CSR) module.
+  The CSR module, as a system controller, contains the LDB's configuration
+  registers.
+
+  For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color
+  format and can map the input to VESA or JEIDA standards.  The two channels
+  cannot be used simultaneously, that is to say, the user should pick one of
+  them to use.  Two LDB channels from two LDB instances can work together in
+  LDB split mode to support a dual link LVDS display.  The channel indexes
+  have to be different.  Channel0 outputs odd pixels and channel1 outputs
+  even pixels.
+
+  For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel
+  input color format.  The two channels can be used simultaneously, either
+  in dual mode or split mode.  In dual mode, the two channels output identical
+  data.  In split mode, channel0 outputs odd pixels and channel1 outputs even
+  pixels.
+
+  A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in
+  the SoC reference manuals.  The pixel mapper uses logic of LDBs embedded in
+  i.MX6qdl/sx SoCs, i.e., it is essentially based on them.  To keep the naming
+  consistency, this binding calls it LDB.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-ldb
+      - fsl,imx8qxp-ldb
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: pixel clock
+      - description: bypass clock
+
+  clock-names:
+    items:
+      - const: pixel
+      - const: bypass
+
+  power-domains:
+    maxItems: 1
+
+  fsl,companion-ldb:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to companion LDB which is used in LDB split mode.
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a channel of LDB.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The channel index.
+        enum: [ 0, 1 ]
+
+      phys:
+        description: A phandle to the phy module representing the LVDS PHY.
+        maxItems: 1
+
+      phy-names:
+        const: lvds_phy
+
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port of the channel.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port of the channel.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - reg
+      - phys
+      - phy-names
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+  - power-domains
+  - channel@0
+  - channel@1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-ldb
+    then:
+      properties:
+        fsl,companion-ldb: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    ldb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "fsl,imx8qxp-ldb";
+        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+                 <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+        clock-names = "pixel", "bypass";
+        power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+        channel@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+            phys = <&mipi_lvds_0_phy>;
+            phy-names = "lvds_phy";
+
+            port@0 {
+                reg = <0>;
+
+                mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+                };
+            };
+        };
+
+        channel@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+            phys = <&mipi_lvds_0_phy>;
+            phy-names = "lvds_phy";
+
+            port@0 {
+                reg = <0>;
+
+                mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
new file mode 100644
index 000000000000..50bae2122183
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-combiner.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Pixel Combiner
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp Pixel Combiner takes two output streams from a
+  single display controller and manipulates the two streams to support a number
+  of modes(bypass, pixel combine, YUV444 to YUV422, split_RGB) configured as
+  either one screen, two screens, or virtual screens.  The pixel combiner is
+  also responsible for generating some of the control signals for the pixel link
+  output channel.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-pixel-combiner
+      - fsl,imx8qxp-pixel-combiner
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: apb
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^channel@[0-1]$":
+    type: object
+    description: Represents a display stream of pixel combiner.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The display stream index.
+        enum: [ 0, 1 ]
+
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input endpoint of the display stream.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output endpoint of the display stream.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - reg
+      - port@0
+      - port@1
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    pixel-combiner@56020000 {
+        compatible = "fsl,imx8qxp-pixel-combiner";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x56020000 0x10000>;
+        clocks = <&dc0_pixel_combiner_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "apb";
+        power-domains = <&pd IMX_SC_R_DC_0>;
+
+        channel@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_combiner_ch0_dc0_dpu_disp0: endpoint {
+                    remote-endpoint = <&dc0_dpu_disp0_dc0_pixel_combiner_ch0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dc0_pixel_combiner_ch0_dc0_pixel_link0: endpoint {
+                    remote-endpoint = <&dc0_pixel_link0_dc0_pixel_combiner_ch0>;
+                };
+            };
+        };
+
+        channel@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_combiner_ch1_dc0_dpu_disp1: endpoint {
+                    remote-endpoint = <&dc0_dpu_disp1_dc0_pixel_combiner_ch1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                dc0_pixel_combiner_ch1_dc0_pixel_link1: endpoint {
+                    remote-endpoint = <&dc0_pixel_link1_dc0_pixel_combiner_ch1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
new file mode 100644
index 000000000000..38ecc7926fad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pixel-link.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Display Pixel Link
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qm/qxp Display Pixel Link(DPL) forms a standard
+  asynchronous linkage between pixel sources(display controller or
+  camera module) and pixel consumers(imaging or displays).
+  It consists of two distinct functions, a pixel transfer function and a
+  control interface.  Multiple pixel channels can exist per one control channel.
+  This binding documentation is only for pixel links whose pixel sources are
+  display controllers.
+
+  The i.MX8qm/qxp Display Pixel Link is accessed via System Controller Unit(SCU)
+  firmware.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-dc-pixel-link
+      - fsl,imx8qxp-dc-pixel-link
+
+  fsl,dc-id:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      u8 value representing the display controller index that the pixel link
+      connects to.
+
+  fsl,dc-stream-id:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      u8 value representing the display controller stream index that the pixel
+      link connects to.
+    enum: [0, 1]
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The pixel link input port node from upstream video source.
+
+    patternProperties:
+      "^port@[1-4]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The pixel link output port node to downstream bridge.
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+      - port@3
+      - port@4
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qxp-dc-pixel-link
+    then:
+      properties:
+        fsl,dc-id:
+          const: 0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-dc-pixel-link
+    then:
+      properties:
+        fsl,dc-id:
+          enum: [0, 1]
+
+required:
+  - compatible
+  - fsl,dc-id
+  - fsl,dc-stream-id
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    dc0-pixel-link0 {
+        compatible = "fsl,imx8qxp-dc-pixel-link";
+        fsl,dc-id = /bits/ 8 <0>;
+        fsl,dc-stream-id = /bits/ 8 <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* from dc0 pixel combiner channel0 */
+            port@0 {
+                reg = <0>;
+
+                dc0_pixel_link0_dc0_pixel_combiner_ch0: endpoint {
+                    remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_pixel_link0>;
+                };
+            };
+
+            /* to PXL2DPIs in MIPI/LVDS combo subsystems */
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                dc0_pixel_link0_mipi_lvds_0_pxl2dpi: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&mipi_lvds_0_pxl2dpi_dc0_pixel_link0>;
+                };
+
+                dc0_pixel_link0_mipi_lvds_1_pxl2dpi: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&mipi_lvds_1_pxl2dpi_dc0_pixel_link0>;
+                };
+            };
+
+            /* unused */
+            port@2 {
+                reg = <2>;
+            };
+
+            /* unused */
+            port@3 {
+                reg = <3>;
+            };
+
+            /* to imaging subsystem */
+            port@4 {
+                reg = <4>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
new file mode 100644
index 000000000000..e4e77fad05f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pxl2dpi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI)
+  interfaces the pixel link 36-bit data output and the DSI controller’s
+  MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module
+  used in LVDS mode, to remap the pixel color codings between those modules.
+  This module is purely combinatorial.
+
+  The i.MX8qxp PXL2DPI is controlled by Control and Status Registers(CSR) module.
+  The CSR module, as a system controller, contains the PXL2DPI's configuration
+  register.
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-pxl2dpi
+
+  fsl,sc-resource:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The SCU resource ID associated with this PXL2DPI instance.
+
+  power-domains:
+    maxItems: 1
+
+  fsl,companion-pxl2dpi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      A phandle which points to companion PXL2DPI which is used by downstream
+      LVDS Display Bridge(LDB) in split mode.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The PXL2DPI input port node from pixel link.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The PXL2DPI output port node to downstream bridge.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - fsl,sc-resource
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    pxl2dpi {
+        compatible = "fsl,imx8qxp-pxl2dpi";
+        fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+        power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                };
+
+                mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint@1 {
+                     reg = <1>;
+                     remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                };
+
+                mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
new file mode 100644
index 000000000000..6e0e3ba9b49e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/fsl,ldb.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/fsl,ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8MP DPI to LVDS bridge chip
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The i.MX8MP mediamix contains two registers which are responsible
+  for configuring the on-SoC DPI-to-LVDS serializer. This describes
+  those registers as bridge within the DT.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mp-ldb
+      - fsl,imx93-ldb
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ldb
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: ldb
+      - const: lvds
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DPI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-A output (panel or bridge).
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS Channel-B output (panel or bridge).
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - clocks
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx93-ldb
+    then:
+      properties:
+        ports:
+          properties:
+            port@2: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    blk-ctrl {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        bridge@5c {
+            compatible = "fsl,imx8mp-ldb";
+            clocks = <&clk IMX8MP_CLK_MEDIA_LDB>;
+            clock-names = "ldb";
+            reg = <0x5c 0x4>, <0x128 0x4>;
+            reg-names = "ldb", "lvds";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    ldb_from_lcdif2: endpoint {
+                        remote-endpoint = <&lcdif2_to_ldb>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    ldb_lvds_ch0: endpoint {
+                        remote-endpoint = <&ldb_to_lvdsx4panel>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    ldb_lvds_ch1: endpoint {
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
index 9f7cc6b757cb..a44d025d33bd 100644
--- a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml
@@ -8,7 +8,6 @@ title: ChromeOS EC ANX7688 HDMI to DP Converter through Type-C Port
 
 maintainers:
   - Nicolas Boichat <drinkcat@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   ChromeOS EC ANX7688 is a display bridge that converts HDMI 2.0 to
@@ -79,4 +78,3 @@ examples:
             };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
new file mode 100644
index 000000000000..0b27df429bdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ4780 HDMI Transmitter
+
+maintainers:
+  - H. Nikolaus Schaller <hns@goldelico.com>
+
+description: |
+  The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4
+  TX controller IP with accompanying PHY IP.
+
+allOf:
+  - $ref: synopsys,dw-hdmi.yaml#
+
+properties:
+  compatible:
+    const: ingenic,jz4780-dw-hdmi
+
+  reg-io-width:
+    const: 4
+
+  clocks:
+    maxItems: 2
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input from LCD controller output.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Link to the HDMI connector.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ports
+  - reg-io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+
+    hdmi: hdmi@10180000 {
+        compatible = "ingenic,jz4780-dw-hdmi";
+        reg = <0x10180000 0x8000>;
+        reg-io-width = <4>;
+        interrupt-parent = <&intc>;
+        interrupts = <3>;
+        clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
+        clock-names = "iahb", "isfr";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            hdmi_in: port@0 {
+                reg = <0>;
+                dw_hdmi_in: endpoint {
+                    remote-endpoint = <&jz4780_lcd_out>;
+                };
+            };
+            hdmi_out: port@1 {
+                reg = <1>;
+                dw_hdmi_out: endpoint {
+                    remote-endpoint = <&hdmi_con>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
index dcb1336ee2a5..958a073f4ff7 100644
--- a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/intel,keembay-dsi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Devicetree bindings for Intel Keem Bay mipi dsi controller
+title: Intel Keem Bay mipi dsi controller
 
 maintainers:
   - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
index 833d11b2303a..c9a882ee6d98 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/ite,it6505.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ITE it6505 Device Tree Bindings
+title: ITE it6505
 
 maintainers:
   - Allen Chen <allen.chen@ite.com.tw>
@@ -52,9 +52,49 @@ properties:
     maxItems: 1
     description: extcon specifier for the Power Delivery
 
-  port:
-    $ref: /schemas/graph.yaml#/properties/port
-    description: A port node pointing to DPI host port node
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: A port node pointing to DPI host port node
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              link-frequencies:
+                minItems: 1
+                maxItems: 1
+                description: Allowed max link frequencies in Hz
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Video port for DP output
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                uniqueItems: true
+                items:
+                  - enum: [ 0, 1 ]
+                  - const: 1
+                  - const: 2
+                  - const: 3
+
+    required:
+      - port@0
+      - port@1
 
 required:
   - compatible
@@ -63,6 +103,7 @@ required:
   - interrupts
   - reset-gpios
   - extcon
+  - ports
 
 additionalProperties: false
 
@@ -85,9 +126,24 @@ examples:
             reset-gpios = <&pio 179 1>;
             extcon = <&usbc_extcon>;
 
-            port {
-                it6505_in: endpoint {
-                    remote-endpoint = <&dpi_out>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    it6505_in: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                        link-frequencies = /bits/ 64 <150000000>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    it6505_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                        data-lanes = <0 1>;
+                    };
                 };
             };
         };
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
index 6ec1d5fbb8bc..a7eb2603691f 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
@@ -4,11 +4,11 @@
 $id: http://devicetree.org/schemas/display/bridge/ite,it66121.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ITE it66121 HDMI bridge Device Tree Bindings
+title: ITE it66121 HDMI bridge
 
 maintainers:
   - Phong LE <ple@baylibre.com>
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The IT66121 is a high-performance and low-power single channel HDMI
@@ -17,7 +17,9 @@ description: |
 
 properties:
   compatible:
-    const: ite,it66121
+    enum:
+      - ite,it66121
+      - ite,it6610
 
   reg:
     maxItems: 1
@@ -38,6 +40,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  "#sound-dai-cells":
+    const: 0
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
index 674891ee2f8e..f201ae4af4fb 100644
--- a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
@@ -67,7 +67,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    i2c4 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml
new file mode 100644
index 000000000000..9a6e9b25d14a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9211.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/lontium,lt9211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lontium LT9211 DSI/LVDS/DPI to DSI/LVDS/DPI bridge.
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+description: |
+  The LT9211 are bridge devices which convert Single/Dual-Link DSI/LVDS
+  or Single DPI to Single/Dual-Link DSI/LVDS or Single DPI.
+
+properties:
+  compatible:
+    enum:
+      - lontium,lt9211
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active high RESET pin.
+
+  vccio-supply:
+    description: Regulator for 1.8V IO power.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Primary MIPI DSI port-1 for MIPI input or
+          LVDS port-1 for LVDS input or DPI input.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional MIPI port-2 for MIPI input or LVDS port-2
+          for LVDS input. Used in combination with primary
+          port-1 to drive higher resolution displays
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Primary MIPI DSI port-1 for MIPI output or
+          LVDS port-1 for LVDS output or DPI output.
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Additional MIPI port-2 for MIPI output or LVDS port-2
+          for LVDS output. Used in combination with primary
+          port-1 to drive higher resolution displays.
+
+    required:
+      - port@0
+      - port@2
+
+required:
+  - compatible
+  - reg
+  - vccio-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      hdmi-bridge@3b {
+        compatible = "lontium,lt9211";
+        reg = <0x3b>;
+
+        reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+        interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+        vccio-supply = <&lt9211_1v8>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@2 {
+            reg = <2>;
+
+            endpoint {
+              remote-endpoint = <&panel_in_lvds>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 304a1367faaa..84aafcbf0919 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -39,6 +39,7 @@ properties:
           - const: lvds-encoder # Generic LVDS encoder compatible fallback
       - items:
           - enum:
+              - ti,ds90cf364a # For the DS90CF364A FPD-Link LVDS Receiver
               - ti,ds90cf384a # For the DS90CF384A FPD-Link LVDS Receiver
           - const: lvds-decoder # Generic LVDS decoders compatible fallback
       - enum:
@@ -49,11 +50,27 @@ properties:
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: |
           For LVDS encoders, port 0 is the parallel input
           For LVDS decoders, port 0 is the LVDS input
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-mapping:
+                enum:
+                  - jeida-18
+                  - jeida-24
+                  - vesa-24
+                description: |
+                  The color signals mapping order. See details in
+                  Documentation/devicetree/bindings/display/lvds.yaml
+
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description: |
@@ -64,6 +81,14 @@ properties:
       - port@0
       - port@1
 
+  pclk-sample:
+    description:
+      Data sampling on rising or falling edge.
+    enum:
+      - 0  # Falling edge
+      - 1  # Rising edge
+    default: 0
+
   powerdown-gpios:
     description:
       The GPIO used to control the power down line of this device.
@@ -71,6 +96,33 @@ properties:
 
   power-supply: true
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: lvds-decoder
+    then:
+      properties:
+        ports:
+          properties:
+            port@0:
+              properties:
+                endpoint:
+                  properties:
+                    data-mapping: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: lvds-encoder
+    then:
+      properties:
+        pclk-sample: false
+
 required:
   - compatible
   - ports
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
new file mode 100644
index 000000000000..70ec70922c13
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nxp,ptn3460.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN3460 eDP to LVDS bridge
+
+maintainers:
+  - Sean Paul <seanpaul@chromium.org>
+
+properties:
+  compatible:
+    const: nxp,ptn3460
+
+  reg:
+    description: I2C address of the bridge
+    maxItems: 1
+
+  edid-emulation:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The EDID emulation entry to use
+      Value  Resolution  Description
+        0     1024x768   NXP Generic
+        1     1920x1080  NXP Generic
+        2     1920x1080  NXP Generic
+        3     1600x900   Samsung LTM200KT
+        4     1920x1080  Samsung LTM230HT
+        5     1366x768   NXP Generic
+        6     1600x900   ChiMei M215HGE
+    enum: [0, 1, 2, 3, 4, 5, 6]
+
+  powerdown-gpios:
+    description: GPIO connected to the PD_N signal.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the RST_N signal.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for LVDS output
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for eDP input
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - edid-emulation
+  - powerdown-gpios
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@20 {
+        compatible = "nxp,ptn3460";
+        reg = <0x20>;
+        edid-emulation = <5>;
+        powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            bridge_out: endpoint {
+              remote-endpoint = <&panel_in>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            bridge_in: endpoint {
+              remote-endpoint = <&dp_out>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
new file mode 100644
index 000000000000..c4bf54397473
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,tda998x.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/nxp,tda998x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP TDA998x HDMI transmitter
+
+maintainers:
+  - Russell King <linux@armlinux.org.uk>
+
+properties:
+  compatible:
+    const: nxp,tda998x
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  video-ports:
+    default: 0x230145
+    maximum: 0xffffff
+    description:
+      24 bits value which defines how the video controller output is wired to
+      the TDA998x input.
+
+  audio-ports:
+    description:
+      Array of 8-bit values, 2 values per DAI (Documentation/sound/soc/dai.rst).
+      The implementation allows one or two DAIs.
+      If two DAIs are defined, they must be of different type.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      minItems: 1
+      items:
+        - description: |
+            The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S
+            (see include/dt-bindings/display/tda998x.h).
+        - description:
+            The second value defines the tda998x AP_ENA reg content when the
+            DAI in question is used.
+
+  '#sound-dai-cells':
+    enum: [ 0, 1 ]
+
+  nxp,calib-gpios:
+    maxItems: 1
+    description:
+      Calibration GPIO, which must correspond with the gpio used for the
+      TDA998x interrupt pin.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: Parallel input port
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        type: object
+        description: Parallel input port
+
+      port@1:
+        type: object
+        description: HDMI output port
+
+required:
+  - compatible
+  - reg
+
+oneOf:
+  - required:
+      - port
+  - required:
+      - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/display/tda998x.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tda998x: hdmi-encoder@70 {
+            compatible = "nxp,tda998x";
+            reg = <0x70>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+            video-ports = <0x230145>;
+
+            #sound-dai-cells = <1>;
+                         /* DAI-format / AP_ENA reg value */
+            audio-ports = <TDA998x_SPDIF 0x04>,
+                          <TDA998x_I2S 0x03>;
+
+            port {
+                tda998x_in: endpoint {
+                    remote-endpoint = <&lcdc_0>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml b/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml
new file mode 100644
index 000000000000..e6397ac2048b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/parade,ps8622.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parade PS8622/PS8625 DisplayPort to LVDS Converter
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - parade,ps8622
+      - parade,ps8625
+
+  reg:
+    maxItems: 1
+
+  lane-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+    description: Number of DP lanes to use.
+
+  use-external-pwm:
+    type: boolean
+    description: Backlight will be controlled by an external PWM.
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to RST_ pin.
+
+  sleep-gpios:
+    maxItems: 1
+    description: GPIO connected to PD_ pin.
+
+  vdd12-supply: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for LVDS output.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DisplayPort input.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - sleep-gpios
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: parade,ps8622
+    then:
+      properties:
+        lane-count:
+          const: 1
+    else:
+      properties:
+        lane-count:
+          const: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lvds-bridge@48 {
+            compatible = "parade,ps8625";
+            reg = <0x48>;
+            sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
+            lane-count = <2>;
+            use-external-pwm;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    bridge_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_in: endpoint {
+                        remote-endpoint = <&dp_out>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ps8622.txt b/Documentation/devicetree/bindings/display/bridge/ps8622.txt
deleted file mode 100644
index c989c3807f2b..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/ps8622.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-ps8622-bridge bindings
-
-Required properties:
-	- compatible: "parade,ps8622" or "parade,ps8625"
-	- reg: first i2c address of the bridge
-	- sleep-gpios: OF device-tree gpio specification for PD_ pin.
-	- reset-gpios: OF device-tree gpio specification for RST_ pin.
-
-Optional properties:
-	- lane-count: number of DP lanes to use
-	- use-external-pwm: backlight will be controlled by an external PWM
-	- video interfaces: Device node can contain video interface port
-			    nodes for panel according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	lvds-bridge@48 {
-		compatible = "parade,ps8622";
-		reg = <0x48>;
-		sleep-gpios = <&gpc3 6 1 0 0>;
-		reset-gpios = <&gpc3 1 1 0 0>;
-		lane-count = <1>;
-		ports {
-			port@0 {
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
index fce82b605c8b..5856450c5da7 100644
--- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
@@ -4,11 +4,10 @@
 $id: http://devicetree.org/schemas/display/bridge/ps8640.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MIPI DSI to eDP Video Format Converter Device Tree Bindings
+title: MIPI DSI to eDP Video Format Converter
 
 maintainers:
   - Nicolas Boichat <drinkcat@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   The PS8640 is a low power MIPI-to-eDP video format converter supporting
@@ -40,6 +39,9 @@ properties:
   vdd33-supply:
     description: Regulator for 3.3V digital core power.
 
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -71,7 +73,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -98,9 +100,22 @@ examples:
                     reg = <1>;
                     ps8640_out: endpoint {
                         remote-endpoint = <&panel_in>;
-                   };
+                    };
+                };
+            };
+
+            aux-bus {
+                panel {
+                    compatible = "boe,nv133fhm-n62";
+                    power-supply = <&pp3300_dx_edp>;
+                    backlight = <&backlight>;
+
+                    port {
+                        panel_in: endpoint {
+                            remote-endpoint = <&ps8640_out>;
+                        };
+                    };
                 };
             };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/display/bridge/ptn3460.txt b/Documentation/devicetree/bindings/display/bridge/ptn3460.txt
deleted file mode 100644
index 361971ba104d..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/ptn3460.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-ptn3460 bridge bindings
-
-Required properties:
-	- compatible: "nxp,ptn3460"
-	- reg: i2c address of the bridge
-	- powerdown-gpio: OF device-tree gpio specification  for PD_N pin.
-	- reset-gpio: OF device-tree gpio specification for RST_N pin.
-	- edid-emulation: The EDID emulation entry to use
-		+-------+------------+------------------+
-		| Value | Resolution | Description      |
-		|   0   |  1024x768  | NXP Generic      |
-		|   1   |  1920x1080 | NXP Generic      |
-		|   2   |  1920x1080 | NXP Generic      |
-		|   3   |  1600x900  | Samsung LTM200KT |
-		|   4   |  1920x1080 | Samsung LTM230HT |
-		|   5   |  1366x768  | NXP Generic      |
-		|   6   |  1600x900  | ChiMei M215HGE   |
-		+-------+------------+------------------+
-
-	- video interfaces: Device node can contain video interface port
-			    nodes for panel according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	lvds-bridge@20 {
-		compatible = "nxp,ptn3460";
-		reg = <0x20>;
-		powerdown-gpio = <&gpy2 5 1 0 0>;
-		reset-gpio = <&gpx1 5 1 0 0>;
-		edid-emulation = <5>;
-		ports {
-			port@0 {
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
new file mode 100644
index 000000000000..d33026f85e19
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi-csi2-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car MIPI DSI/CSI-2 Encoder
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+
+description: |
+  This binding describes the MIPI DSI/CSI-2 encoder embedded in the Renesas
+  R-Car Gen4 SoCs. The encoder can operate in either DSI or CSI-2 mode, with up
+  to four data lanes.
+
+properties:
+  compatible:
+    enum:
+      - renesas,r8a779a0-dsi-csi2-tx    # for V3U
+      - renesas,r8a779g0-dsi-csi2-tx    # for V4H
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Functional clock
+      - description: DSI (and CSI-2) functional clock
+      - description: PLL reference clock
+
+  clock-names:
+    items:
+      - const: fck
+      - const: dsi
+      - const: pll
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DSI/CSI-2 output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - power-domains
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
+    #include <dt-bindings/power/r8a779a0-sysc.h>
+
+    dsi0: dsi-encoder@fed80000 {
+        compatible = "renesas,r8a779a0-dsi-csi2-tx";
+        reg = <0xfed80000 0x10000>;
+        power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+        clocks = <&cpg CPG_MOD 415>,
+                 <&cpg CPG_CORE R8A779A0_CLK_DSI>,
+                 <&cpg CPG_CORE R8A779A0_CLK_CP>;
+        clock-names = "fck", "dsi", "pll";
+        resets = <&cpg 415>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi0_in: endpoint {
+                    remote-endpoint = <&du_out_dsi0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    data-lanes = <1 2>;
+                    remote-endpoint = <&sn65dsi86_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
new file mode 100644
index 000000000000..e08c24633926
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L MIPI DSI Encoder
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+  This binding describes the MIPI DSI encoder embedded in the Renesas
+  RZ/G2L alike family of SoC's. The encoder can operate in DSI mode, with
+  up to four data lanes.
+
+allOf:
+  - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-mipi-dsi # RZ/G2{L,LC}
+          - renesas,r9a07g054-mipi-dsi # RZ/V2L
+      - const: renesas,rzg2l-mipi-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Sequence operation channel 0 interrupt
+      - description: Sequence operation channel 1 interrupt
+      - description: Video-Input operation channel 1 interrupt
+      - description: DSI Packet Receive interrupt
+      - description: DSI Fatal Error interrupt
+      - description: DSI D-PHY PPI interrupt
+      - description: Debug interrupt
+
+  interrupt-names:
+    items:
+      - const: seq0
+      - const: seq1
+      - const: vin1
+      - const: rcv
+      - const: ferr
+      - const: ppi
+      - const: debug
+
+  clocks:
+    items:
+      - description: DSI D-PHY PLL multiplied clock
+      - description: DSI D-PHY system clock
+      - description: DSI AXI bus clock
+      - description: DSI Register access clock
+      - description: DSI Video clock
+      - description: DSI D-PHY Escape mode transmit clock
+
+  clock-names:
+    items:
+      - const: pllclk
+      - const: sysclk
+      - const: aclk
+      - const: pclk
+      - const: vclk
+      - const: lpclk
+
+  resets:
+    items:
+      - description: MIPI_DSI_CMN_RSTB
+      - description: MIPI_DSI_ARESET_N
+      - description: MIPI_DSI_PRESET_N
+
+  reset-names:
+    items:
+      - const: rst
+      - const: arst
+      - const: prst
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: DSI output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dsi0: dsi@10850000 {
+        compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
+        reg = <0x10850000 0x20000>;
+        interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "seq0", "seq1", "vin1", "rcv",
+                          "ferr", "ppi", "debug";
+        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+        reset-names = "rst", "arst", "prst";
+        power-domains = <&cpg>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi0_in: endpoint {
+                    remote-endpoint = <&du_out_dsi0>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi0_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&adv7535_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
index 0c9785c8db51..e3ec697f89e7 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
@@ -38,6 +38,9 @@ properties:
   clock-names:
     maxItems: 2
 
+  resets:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -67,6 +70,7 @@ required:
   - reg
   - clocks
   - clock-names
+  - resets
   - interrupts
   - ports
 
@@ -85,6 +89,7 @@ examples:
         clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
         clock-names = "iahb", "isfr";
         power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 729>;
 
         ports {
             #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
index acfc327f70a7..bb9dbfb9beaf 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
@@ -28,6 +28,7 @@ properties:
       - renesas,r8a7793-lvds # for R-Car M2-N compatible LVDS encoders
       - renesas,r8a7795-lvds # for R-Car H3 compatible LVDS encoders
       - renesas,r8a7796-lvds # for R-Car M3-W compatible LVDS encoders
+      - renesas,r8a77961-lvds # for R-Car M3-W+ compatible LVDS encoders
       - renesas,r8a77965-lvds # for R-Car M3-N compatible LVDS encoders
       - renesas,r8a77970-lvds # for R-Car V3M compatible LVDS encoders
       - renesas,r8a77980-lvds # for R-Car V3H compatible LVDS encoders
@@ -94,7 +95,6 @@ then:
   properties:
     clocks:
       minItems: 1
-      maxItems: 4
       items:
         - description: Functional clock
         - description: EXTAL input clock
@@ -103,7 +103,6 @@ then:
 
     clock-names:
       minItems: 1
-      maxItems: 4
       items:
         - const: fck
         # The LVDS encoder can use the EXTAL or DU_DOTCLKINx clocks.
@@ -127,12 +126,10 @@ then:
 else:
   properties:
     clocks:
-      maxItems: 1
       items:
         - description: Functional clock
 
     clock-names:
-      maxItems: 1
       items:
         - const: fck
 
diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
new file mode 100644
index 000000000000..e841659e20cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
@@ -0,0 +1,255 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/samsung,mipi-dsim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung MIPI DSIM bridge controller
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Jagan Teki <jagan@amarulasolutions.com>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+
+description: |
+  Samsung MIPI DSIM bridge controller can be found it on Exynos
+  and i.MX8M Mini/Nano/Plus SoC's.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos3250-mipi-dsi
+          - samsung,exynos4210-mipi-dsi
+          - samsung,exynos5410-mipi-dsi
+          - samsung,exynos5422-mipi-dsi
+          - samsung,exynos5433-mipi-dsi
+          - fsl,imx8mm-mipi-dsim
+          - fsl,imx8mp-mipi-dsim
+      - items:
+          - const: fsl,imx8mn-mipi-dsim
+          - const: fsl,imx8mm-mipi-dsim
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    maxItems: 5
+
+  samsung,phy-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: phandle to the samsung phy-type
+
+  power-domains:
+    maxItems: 1
+
+  samsung,power-domain:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the associated samsung power domain
+
+  vddcore-supply:
+    description: MIPI DSIM Core voltage supply (e.g. 1.1V)
+
+  vddio-supply:
+    description: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
+
+  samsung,burst-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DSIM high speed burst mode frequency.
+
+  samsung,esc-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DSIM escape mode frequency.
+
+  samsung,pll-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      DSIM oscillator clock frequency.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dsim
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node to receive pixel data from the
+          display controller. Exactly one endpoint must be
+          specified.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          DSI output port node to the panel or the next bridge
+          in the chain.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interrupts
+  - reg
+  - samsung,burst-clock-frequency
+  - samsung,esc-clock-frequency
+  - samsung,pll-clock-frequency
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 5
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: phyclk_mipidphy0_bitclkdiv8
+            - const: phyclk_mipidphy0_rxclkesc0
+            - const: sclk_rgb_vclk_to_dsim0
+            - const: sclk_mipi
+
+        ports:
+          required:
+            - port@0
+
+      required:
+        - ports
+        - vddcore-supply
+        - vddio-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5410-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: pll_clk
+
+      required:
+        - vddcore-supply
+        - vddio-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4210-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: sclk_mipi
+
+      required:
+        - vddcore-supply
+        - vddio-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos3250-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: bus_clk
+            - const: pll_clk
+
+      required:
+        - vddcore-supply
+        - vddio-supply
+        - samsung,phy-type
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dsi@13900000 {
+       compatible = "samsung,exynos5433-mipi-dsi";
+       reg = <0x13900000 0xC0>;
+       interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+       phys = <&mipi_phy 1>;
+       phy-names = "dsim";
+       clocks = <&cmu_disp CLK_PCLK_DSIM0>,
+                <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>,
+                <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>,
+                <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>,
+                <&cmu_disp CLK_SCLK_DSIM0>;
+       clock-names = "bus_clk",
+                     "phyclk_mipidphy0_bitclkdiv8",
+                     "phyclk_mipidphy0_rxclkesc0",
+                     "sclk_rgb_vclk_to_dsim0",
+                     "sclk_mipi";
+       power-domains = <&pd_disp>;
+       vddcore-supply = <&ldo6_reg>;
+       vddio-supply = <&ldo7_reg>;
+       samsung,burst-clock-frequency = <512000000>;
+       samsung,esc-clock-frequency = <16000000>;
+       samsung,pll-clock-frequency = <24000000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&te_irq>;
+
+       ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+             reg = <0>;
+
+             dsi_to_mic: endpoint {
+                remote-endpoint = <&mic_to_dsi>;
+             };
+          };
+       };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
deleted file mode 100644
index 3bc760cc31cb..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-sii902x HDMI bridge bindings
-
-Required properties:
-	- compatible: "sil,sii9022"
-	- reg: i2c address of the bridge
-
-Optional properties:
-	- interrupts: describe the interrupt line used to inform the host
-	  about hotplug events.
-	- reset-gpios: OF device-tree gpio specification for RST_N pin.
-	- iovcc-supply: I/O Supply Voltage (1.8V or 3.3V)
-	- cvcc12-supply: Digital Core Supply Voltage (1.2V)
-
-	HDMI audio properties:
-	- #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin
-	   is wired, <1> if the both are wired. HDMI audio is
-	   configured only if this property is found.
-	- sil,i2s-data-lanes: Array of up to 4 integers with values of 0-3
-	   Each integer indicates which i2s pin is connected to which
-	   audio fifo. The first integer selects i2s audio pin for the
-	   first audio fifo#0 (HDMI channels 1&2), second for fifo#1
-	   (HDMI channels 3&4), and so on. There is 4 fifos and 4 i2s
-	   pins (SD0 - SD3). Any i2s pin can be connected to any fifo,
-	   but there can be no gaps. E.g. an i2s pin must be mapped to
-	   fifo#0 and fifo#1 before mapping a channel to fifo#2. Default
-	   value is <0>, describing SD0 pin beiging routed to hdmi audio
-	   fifo #0.
-	- clocks: phandle and clock specifier for each clock listed in
-           the clock-names property
-	- clock-names: "mclk"
-	   Describes SII902x MCLK input. MCLK can be used to produce
-	   HDMI audio CTS values. This property follows
-	   Documentation/devicetree/bindings/clock/clock-bindings.txt
-	   consumer binding.
-
-	If HDMI audio is configured the sii902x device becomes an I2S
-	and/or spdif audio codec component (e.g a digital audio sink),
-	that can be used in configuring a full audio devices with
-	simple-card or audio-graph-card binding. See their binding
-	documents on how to describe the way the sii902x device is
-	connected to the rest of the audio system:
-	Documentation/devicetree/bindings/sound/simple-card.yaml
-	Documentation/devicetree/bindings/sound/audio-graph-card.yaml
-	Note: In case of the audio-graph-card binding the used port
-	index should be 3.
-
-Optional subnodes:
-	- video input: this subnode can contain a video input port node
-	  to connect the bridge to a display controller output (See this
-	  documentation [1]).
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	hdmi-bridge@39 {
-		compatible = "sil,sii9022";
-		reg = <0x39>;
-		reset-gpios = <&pioA 1 0>;
-		iovcc-supply = <&v3v3_hdmi>;
-		cvcc12-supply = <&v1v2_hdmi>;
-
-		#sound-dai-cells = <0>;
-		sil,i2s-data-lanes = < 0 1 2 >;
-		clocks = <&mclk>;
-		clock-names = "mclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				bridge_in: endpoint {
-					remote-endpoint = <&dc_out>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
deleted file mode 100644
index a55bf77bd960..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/sii9234.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Silicon Image SiI9234 HDMI/MHL bridge bindings
-
-Required properties:
-	- compatible : "sil,sii9234".
-	- reg : I2C address for TPI interface, use 0x39
-	- avcc33-supply : MHL/USB Switch Supply Voltage (3.3V)
-	- iovcc18-supply : I/O Supply Voltage (1.8V)
-	- avcc12-supply : TMDS Analog Supply Voltage (1.2V)
-	- cvcc12-supply : Digital Core Supply Voltage (1.2V)
-	- interrupts: interrupt specifier of INT pin
-	- reset-gpios: gpio specifier of RESET pin (active low)
-	- video interfaces: Device node can contain two video interface port
-			    nodes for HDMI encoder and connector according to [1].
-			    - port@0 - MHL to HDMI
-			    - port@1 - MHL to connector
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-
-Example:
-	sii9234@39 {
-		compatible = "sil,sii9234";
-		reg = <0x39>;
-		avcc33-supply = <&vcc33mhl>;
-		iovcc18-supply = <&vcc18mhl>;
-		avcc12-supply = <&vsil12>;
-		cvcc12-supply = <&vsil12>;
-		reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
-		interrupt-parent = <&gpf3>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				mhl_to_hdmi: endpoint {
-					remote-endpoint = <&hdmi_to_mhl>;
-				};
-			};
-			port@1 {
-				reg = <1>;
-				mhl_to_connector: endpoint {
-					remote-endpoint = <&connector_to_mhl>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml
new file mode 100644
index 000000000000..6d1a36b76fcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii8620.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image SiI8620 HDMI/MHL bridge
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+properties:
+  compatible:
+    const: sil,sii8620
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: xtal
+
+  cvcc10-supply:
+    description: Digital Core Supply Voltage (1.0V)
+
+  interrupts:
+    maxItems: 1
+
+  iovcc18-supply:
+    description: I/O Supply Voltage (1.8V)
+
+  reset-gpios:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    unevaluatedProperties: false
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for HDMI (encoder) input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          MHL to connector port
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - cvcc10-supply
+  - interrupts
+  - iovcc18-supply
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@39 {
+            reg = <0x39>;
+            compatible = "sil,sii8620";
+            cvcc10-supply = <&ldo36_reg>;
+            iovcc18-supply = <&ldo34_reg>;
+            interrupt-parent = <&gpf0>;
+            interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+            reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
+            clocks = <&pmu_system_controller 0>;
+            clock-names = "xtal";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mhl_to_hdmi: endpoint {
+                        remote-endpoint = <&hdmi_to_mhl>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mhl_to_musb_con: endpoint {
+                        remote-endpoint = <&musb_con_to_mhl>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
new file mode 100644
index 000000000000..5a69547ad3d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii9022.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image sii902x HDMI bridge
+
+maintainers:
+  - Boris Brezillon <bbrezillon@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sil,sii9022-cpi # CEC Programming Interface
+              - sil,sii9022-tpi # Transmitter Programming Interface
+          - const: sil,sii9022
+      - const: sil,sii9022
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Interrupt line used to inform the host about hotplug events.
+
+  reset-gpios:
+    maxItems: 1
+
+  iovcc-supply:
+    description: I/O Supply Voltage (1.8V or 3.3V)
+
+  cvcc12-supply:
+    description: Digital Core Supply Voltage (1.2V)
+
+  '#sound-dai-cells':
+    enum: [ 0, 1 ]
+    description: |
+      <0> if only I2S or S/PDIF pin is wired,
+      <1> if both are wired.
+      HDMI audio is configured only if this property is found.
+      If HDMI audio is configured, the sii902x device becomes an I2S and/or
+      S/PDIF audio codec component (e.g. a digital audio sink), that can be
+      used in configuring full audio devices with simple-card or
+      audio-graph-card bindings. See their binding documents on how to describe
+      the way the
+      sii902x device is connected to the rest of the audio system:
+      Documentation/devicetree/bindings/sound/simple-card.yaml
+      Documentation/devicetree/bindings/sound/audio-graph-card.yaml
+      Note: In case of the audio-graph-card binding the used port index should
+      be 3.
+
+  sil,i2s-data-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    uniqueItems: true
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    description:
+      Each integer indicates which I2S pin is connected to which audio FIFO.
+      The first integer selects the I2S audio pin for the first audio FIFO#0
+      (HDMI channels 1&2), the second for FIFO#1 (HDMI channels 3&4), and so
+      on. There are 4 FIFOs and 4 I2S pins (SD0 - SD3). Any I2S pin can be
+      connected to any FIFO, but there can be no gaps. E.g. an I2S pin must be
+      mapped to FIFO#0 and FIFO#1 before mapping a channel to FIFO#2. The
+      default value is <0>, describing SD0 pin being routed to HDMI audio
+      FIFO#0.
+
+  clocks:
+    maxItems: 1
+    description: MCLK input. MCLK can be used to produce HDMI audio CTS values.
+
+  clock-names:
+    const: mclk
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Parallel RGB input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: HDMI output port
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Sound input port
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hdmi-bridge@39 {
+            compatible = "sil,sii9022";
+            reg = <0x39>;
+            reset-gpios = <&pioA 1 0>;
+            iovcc-supply = <&v3v3_hdmi>;
+            cvcc12-supply = <&v1v2_hdmi>;
+
+            #sound-dai-cells = <0>;
+            sil,i2s-data-lanes = < 0 1 2 >;
+            clocks = <&mclk>;
+            clock-names = "mclk";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    bridge_in: endpoint {
+                        remote-endpoint = <&dc_out>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml
new file mode 100644
index 000000000000..176181d25530
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/sil,sii9234.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Image SiI9234 HDMI/MHL bridge
+
+maintainers:
+  - Maciej Purski <m.purski@samsung.com>
+
+properties:
+  compatible:
+    const: sil,sii9234
+
+  reg:
+    description: I2C address for TPI interface
+    maxItems: 1
+
+  avcc12-supply:
+    description: TMDS Analog Supply Voltage, 1.2V
+
+  avcc33-supply:
+    description: MHL/USB Switch Supply Voltage, 3.3V
+
+  cvcc12-supply:
+    description: Digital Core Supply Voltage, 1.2V
+
+  iovcc18-supply:
+    description: I/O voltage supply, 1.8V
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the reset pin.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for HDMI (encoder) input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          MHL to connector port
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - avcc12-supply
+  - avcc33-supply
+  - cvcc12-supply
+  - iovcc18-supply
+  - interrupts
+  - reset-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@39 {
+        compatible = "sil,sii9234";
+        reg = <0x39>;
+        avcc12-supply = <&vsil12>;
+        avcc33-supply = <&vcc33mhl>;
+        cvcc12-supply = <&vsil12>;
+        iovcc18-supply = <&vcc18mhl>;
+        interrupt-parent = <&gpf3>;
+        interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+        reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            mhl_to_hdmi: endpoint {
+              remote-endpoint = <&hdmi_to_mhl>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            mhl_to_connector: endpoint {
+              remote-endpoint = <&connector_to_mhl>;
+            };
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt b/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
deleted file mode 100644
index b05052f7d62f..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/sil-sii8620.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Silicon Image SiI8620 HDMI/MHL bridge bindings
-
-Required properties:
-	- compatible: "sil,sii8620"
-	- reg: i2c address of the bridge
-	- cvcc10-supply: Digital Core Supply Voltage (1.0V)
-	- iovcc18-supply: I/O Supply Voltage (1.8V)
-	- interrupts: interrupt specifier of INT pin
-	- reset-gpios: gpio specifier of RESET pin
-	- clocks, clock-names: specification and name of "xtal" clock
-	- video interfaces: Device node can contain video interface port
-			    node for HDMI encoder according to [1].
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	sii8620@39 {
-		reg = <0x39>;
-		compatible = "sil,sii8620";
-		cvcc10-supply = <&ldo36_reg>;
-		iovcc18-supply = <&ldo34_reg>;
-		interrupt-parent = <&gpf0>;
-		interrupts = <2 0>;
-		reset-gpio = <&gpv7 0 0>;
-		clocks = <&pmu_system_controller 0>;
-		clock-names = "xtal";
-
-		port {
-			mhl_to_hdmi: endpoint {
-				remote-endpoint = <&hdmi_to_mhl>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
index 3c3e51af154b..0b51c64f141a 100644
--- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Synopsys DesignWare MIPI DSI host controller
 
 maintainers:
-  - Philippe CORNU <philippe.cornu@st.com>
+  - Philippe CORNU <philippe.cornu@foss.st.com>
 
 description: |
   This document defines device tree properties for the Synopsys DesignWare MIPI
@@ -26,19 +26,9 @@ properties:
   reg:
     maxItems: 1
 
-  clocks:
-    items:
-      - description: Module clock
-      - description: DSI bus clock for either AHB and APB
-      - description: Pixel clock for the DPI/RGB input
-    minItems: 2
-
-  clock-names:
-    items:
-      - const: ref
-      - const: pclk
-      - const: px_clk
-    minItems: 2
+  clocks: true
+
+  clock-names: true
 
   resets:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
index 9be44a682e67..4b7e54a8f037 100644
--- a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
@@ -26,9 +26,7 @@ properties:
   reg-io-width:
     description:
       Width (in bytes) of the registers specified by the reg property.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - enum: [1, 4]
+    enum: [1, 4]
     default: 1
 
   clocks:
diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
deleted file mode 100644
index f5a02f61dd36..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Device-Tree bindings for the NXP TDA998x HDMI transmitter
-
-Required properties;
-  - compatible: must be "nxp,tda998x"
-
-  - reg: I2C address
-
-Required node:
-  - port: Input port node with endpoint definition, as described
-        in Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - interrupts: interrupt number and trigger type
-	default: polling
-
-  - pinctrl-0: pin control group to be used for
-	screen plug/unplug interrupt.
-
-  - pinctrl-names: must contain a "default" entry.
-
-  - video-ports: 24 bits value which defines how the video controller
-	output is wired to the TDA998x input - default: <0x230145>
-
-  - audio-ports: array of 8-bit values, 2 values per one DAI[1].
-	The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S[2].
-	The second value defines the tda998x AP_ENA reg content when the DAI
-	in question is used. The implementation allows one or two DAIs. If two
-	DAIs are defined, they must be of different type.
-
-  - nxp,calib-gpios: calibration GPIO, which must correspond with the
-	gpio used for the TDA998x interrupt pin.
-
-[1] Documentation/sound/soc/dai.rst
-[2] include/dt-bindings/display/tda998x.h
-
-Example:
-
-#include <dt-bindings/display/tda998x.h>
-
-	tda998x: hdmi-encoder {
-		compatible = "nxp,tda998x";
-		reg = <0x70>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <27 2>;		/* falling edge */
-		pinctrl-0 = <&pmx_camera>;
-		pinctrl-names = "default";
-		video-ports = <0x230145>;
-
-		#sound-dai-cells = <2>;
-			     /*	DAI-format	AP_ENA reg value */
-		audio-ports = <	TDA998x_SPDIF	0x04
-				TDA998x_I2S	0x03>;
-
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
new file mode 100644
index 000000000000..d3f84d220723
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ti,dlpc3433.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DLPC3433 MIPI DSI to DMD bridge
+
+maintainers:
+  - Jagan Teki <jagan@amarulasolutions.com>
+  - Christopher Vollo <chris@renewoutreach.org>
+
+description: |
+  TI DLPC3433 is a MIPI DSI based display controller bridge
+  for processing high resolution DMD based projectors.
+
+  It has a flexible configuration of MIPI DSI and DPI signal
+  input that produces a DMD output in RGB565, RGB666, RGB888
+  formats.
+
+  It supports upto 720p resolution with 60 and 120 Hz refresh
+  rates.
+
+properties:
+  compatible:
+    const: ti,dlpc3433
+
+  reg:
+    enum:
+      - 0x1b
+      - 0x1d
+
+  enable-gpios:
+    description: PROJ_ON pin, chip powers up PROJ_ON is high.
+
+  vcc_intf-supply:
+    description: A 1.8V/3.3V supply that power the Host I/O.
+
+  vcc_flsh-supply:
+    description: A 1.8V/3.3V supply that power the Flash I/O.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Video port for MIPI DSI input.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Video port for DMD output.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@1b {
+            compatible = "ti,dlpc3433";
+            reg = <0x1b>;
+            enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    bridge_in_dsi: endpoint {
+                        remote-endpoint = <&dsi_out_bridge>;
+                        data-lanes = <1 2 3 4>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_out_panel: endpoint {
+                        remote-endpoint = <&panel_out_bridge>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
index b446d0f0f1b4..48a97bb3e2e0 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml
@@ -32,6 +32,9 @@ properties:
     maxItems: 1
     description: GPIO specifier for bridge_en pin (active high).
 
+  vcc-supply:
+    description: A 1.8V power supply (see regulator/regulator.yaml).
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -91,7 +94,6 @@ properties:
 required:
   - compatible
   - reg
-  - enable-gpios
   - ports
 
 allOf:
@@ -133,6 +135,7 @@ examples:
             reg = <0x2d>;
 
             enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+            vcc-supply = <&reg_sn65dsi83_1v8>;
 
             ports {
                 #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
index 911564468c5e..6ec6d287bff4 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
@@ -90,7 +90,7 @@ properties:
 
         properties:
           endpoint:
-            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            $ref: /schemas/media/video-interfaces.yaml#
             unevaluatedProperties: false
 
             properties:
@@ -106,7 +106,6 @@ properties:
                     description:
                       If you have 1 logical lane the bridge supports routing
                       to either port 0 or port 1.  Port 0 is suggested.
-                      See ../../media/video-interface.txt for details.
 
                   - minItems: 2
                     maxItems: 2
@@ -118,7 +117,6 @@ properties:
                     description:
                       If you have 2 logical lanes the bridge supports
                       reordering but only on physical ports 0 and 1.
-                      See ../../media/video-interface.txt for details.
 
                   - minItems: 4
                     maxItems: 4
@@ -132,7 +130,6 @@ properties:
                     description:
                       If you have 4 logical lanes the bridge supports
                       reordering in any way.
-                      See ../../media/video-interface.txt for details.
 
               lane-polarities:
                 minItems: 1
@@ -141,7 +138,6 @@ properties:
                   enum:
                     - 0
                     - 1
-                description: See ../../media/video-interface.txt
 
             dependencies:
               lane-polarities: [data-lanes]
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
index 5216c27fc0ad..81ca3cbc7abe 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
@@ -39,7 +39,6 @@ properties:
           Video port for MIPI DPI output (panel or connector).
 
     required:
-      - port@0
       - port@1
 
 required:
@@ -52,7 +51,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c1 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
deleted file mode 100644
index 8f9abf28a8fa..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-TC358764 MIPI-DSI to LVDS panel bridge
-
-Required properties:
-  - compatible: "toshiba,tc358764"
-  - reg: the virtual channel number of a DSI peripheral
-  - vddc-supply: core voltage supply, 1.2V
-  - vddio-supply: I/O voltage supply, 1.8V or 3.3V
-  - vddlvds-supply: LVDS1/2 voltage supply, 3.3V
-  - reset-gpios: a GPIO spec for the reset pin
-
-The device node can contain following 'port' child nodes,
-according to the OF graph bindings defined in [1]:
-  0: DSI Input, not required, if the bridge is DSI controlled
-  1: LVDS Output, mandatory
-
-[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	bridge@0 {
-		reg = <0>;
-		compatible = "toshiba,tc358764";
-		vddc-supply = <&vcc_1v2_reg>;
-		vddio-supply = <&vcc_1v8_reg>;
-		vddlvds-supply = <&vcc_3v3_reg>;
-		reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@1 {
-			reg = <1>;
-			lvds_ep: endpoint {
-				remote-endpoint = <&panel_ep>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml
new file mode 100644
index 000000000000..866607400514
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358764.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358764.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358764 MIPI-DSI to LVDS bridge
+
+maintainers:
+  - Andrzej Hajda <andrzej.hajda@intel.com>
+
+properties:
+  compatible:
+    const: toshiba,tc358764
+
+  reg:
+    description: Virtual channel number of a DSI peripheral
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  vddc-supply:
+    description: Core voltage supply, 1.2V
+
+  vddio-supply:
+    description: I/O voltage supply, 1.8V or 3.3V
+
+  vddlvds-supply:
+    description: LVDS1/2 voltage supply, 3.3V
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DSI input, if the bridge DSI controlled
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for LVDS output (panel or connector).
+
+    required:
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vddc-supply
+  - vddio-supply
+  - vddlvds-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bridge@0 {
+            compatible = "toshiba,tc358764";
+            reg = <0>;
+
+            reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
+            vddc-supply = <&vcc_1v2_reg>;
+            vddio-supply = <&vcc_1v8_reg>;
+            vddlvds-supply = <&vcc_3v3_reg>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+                    lvds_ep: endpoint {
+                      remote-endpoint = <&panel_ep>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
deleted file mode 100644
index 583c5e9dbe6b..000000000000
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Toshiba TC358767 eDP bridge bindings
-
-Required properties:
- - compatible: "toshiba,tc358767"
- - reg: i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
- - clock-names: should be "ref"
- - clocks: OF device-tree clock specification for refclk input. The reference
-   clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
-
-Optional properties:
- - shutdown-gpios: OF device-tree gpio specification for SD pin
-                   (active high shutdown input)
- - reset-gpios: OF device-tree gpio specification for RSTX pin
-                (active low system reset)
- - toshiba,hpd-pin: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
- - ports: the ports node can contain video interface port nodes to connect
-   to a DPI/DSI source and to an eDP/DP sink according to [1][2]:
-    - port@0: DSI input port
-    - port@1: DPI input port
-    - port@2: eDP/DP output port
-
-[1]: Documentation/devicetree/bindings/graph.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-	edp-bridge@68 {
-		compatible = "toshiba,tc358767";
-		reg = <0x68>;
-		shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
-		clock-names = "ref";
-		clocks = <&edp_refclk>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-
-				bridge_in: endpoint {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
new file mode 100644
index 000000000000..e1494b5007cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358767 eDP bridge
+
+maintainers:
+  - Andrey Gusakov <andrey.gusakov@cogentembedded.com>
+
+description: The TC358767 is bridge device which converts DSI/DPI to eDP/DP
+
+properties:
+  compatible:
+    const: toshiba,tc358767
+
+  reg:
+    enum:
+      - 0x68
+      - 0x0f
+    description: |
+        i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
+
+  clock-names:
+    const: ref
+
+  clocks:
+    maxItems: 1
+    description: |
+        OF device-tree clock specification for refclk input. The reference.
+        clock rate must be 13 MHz, 19.2 MHz, 26 MHz, or 38.4 MHz.
+
+  shutdown-gpios:
+    maxItems: 1
+    description: |
+        OF device-tree gpio specification for SD pin(active high shutdown input)
+
+  reset-gpios:
+    maxItems: 1
+    description: |
+        OF device-tree gpio specification for RSTX pin(active low system reset)
+
+  toshiba,hpd-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0
+      - 1
+    description: TC358767 GPIO pin number to which HPD is connected to (0 or 1)
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: |
+            DSI input port. The remote endpoint phandle should be a
+            reference to a valid DSI output endpoint node
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+            DPI input/output port. The remote endpoint phandle should be a
+            reference to a valid DPI output or input endpoint node.
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: |
+            eDP/DP output port. The remote endpoint phandle should be a
+            reference to a valid eDP panel input endpoint node. This port is
+            optional, treated as DP panel if not defined
+
+    oneOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    /* DPI input and eDP output */
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        edp-bridge@68 {
+            compatible = "toshiba,tc358767";
+            reg = <0x68>;
+            shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+            clock-names = "ref";
+            clocks = <&edp_refclk>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_in_0: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    bridge_out: endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+                };
+            };
+        };
+    };
+  - |
+    /* DPI input and DP output */
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        edp-bridge@68 {
+            compatible = "toshiba,tc358767";
+            reg = <0x68>;
+            shutdown-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+            clock-names = "ref";
+            clocks = <&edp_refclk>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@1 {
+                    reg = <1>;
+
+                    bridge_in_1: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
index eacfe7165083..779d8c57f854 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
@@ -58,6 +58,7 @@ properties:
 
             properties:
               data-lines:
+                $ref: /schemas/types.yaml#/definitions/uint32
                 enum: [ 16, 18, 24 ]
 
       port@1:
@@ -77,17 +78,20 @@ required:
   - vddio-supply
   - ports
 
-additionalProperties: false
+allOf:
+  - $ref: ../dsi-controller.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    i2c1 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
-      dsi_bridge: dsi-bridge@e {
+      dsi_bridge: dsi@e {
         compatible = "toshiba,tc358768";
         reg = <0xe>;
 
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
index 10471c6c1ff9..d879c700594a 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Toshiba TC358775 DSI to LVDS bridge bindings
+title: Toshiba TC358775 DSI to LVDS bridge
 
 maintainers:
   - Vinay Simha BN <simhavcs@gmail.com>
diff --git a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
index 5e4afe9f98fb..0ece7b01790b 100644
--- a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
+++ b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
@@ -26,7 +26,7 @@ description:
 
 properties:
   $nodename:
-    const: "aux-bus"
+    const: aux-bus
 
   panel:
     $ref: panel/panel-common.yaml#
diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml
index ca21671f6bdd..67ce10307ee0 100644
--- a/Documentation/devicetree/bindings/display/dsi-controller.yaml
+++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml
@@ -30,6 +30,15 @@ properties:
   $nodename:
     pattern: "^dsi(@.*)?$"
 
+  clock-master:
+    type: boolean
+    description:
+      Should be enabled if the host is being used in conjunction with
+      another DSI host to drive the same peripheral. Hardware supporting
+      such a configuration generally requires the data on both the busses
+      to be driven by the same clock. Only the DSI host instance
+      controlling this clock should contain this property.
+
   "#address-cells":
     const: 1
 
@@ -52,15 +61,6 @@ patternProperties:
           case the reg property can take multiple entries, one for each virtual
           channel that the peripheral responds to.
 
-      clock-master:
-        type: boolean
-        description:
-          Should be enabled if the host is being used in conjunction with
-          another DSI host to drive the same peripheral. Hardware supporting
-          such a configuration generally requires the data on both the busses
-          to be driven by the same clock. Only the DSI host instance
-          controlling this clock should contain this property.
-
       enforce-video-mode:
         type: boolean
         description:
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt b/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt
deleted file mode 100644
index 0fba2ee6440a..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos-mic.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC)
-
-MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is
-not capable to transfer high resoltuion frame data as decon can send. MIC
-solves this problem by compressing the frame data by 1/2 before it is
-transferred through mipi dsi. The compressed frame data must be uncompressed in
-the panel PCB.
-
-Required properties:
-- compatible: value should be "samsung,exynos5433-mic".
-- reg: physical base address and length of the MIC registers set and system
-       register of mic.
-- clocks: must include clock specifiers corresponding to entries in the
-	  clock-names property.
-- clock-names: list of clock names sorted in the same order as the clocks
-	       property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0".
-- samsung,disp-syscon: the reference node for syscon for DISP block.
-- ports: contains a port which is connected to decon node and dsi node.
-	 address-cells and size-cells must 1 and 0, respectively.
-- port: contains an endpoint node which is connected to the endpoint in the
-	decon node or dsi node. The reg value must be 0 and 1 respectively.
-
-Example:
-SoC specific DT entry:
-mic: mic@13930000 {
-	compatible = "samsung,exynos5433-mic";
-	reg = <0x13930000 0x48>;
-	clocks = <&cmu_disp CLK_PCLK_MIC0>,
-	       <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
-	clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
-	samsung,disp-syscon = <&syscon_disp>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			mic_to_decon: endpoint {
-				remote-endpoint = <&decon_to_mic>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			mic_to_dsi: endpoint {
-				remote-endpoint = <&dsi_to_mic>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
deleted file mode 100644
index 775193e1c641..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos5433-decon.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Device-Tree bindings for Samsung Exynos SoC display controller (DECON)
-
-DECON (Display and Enhancement Controller) is the Display Controller for the
-Exynos series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be one of:
-	"samsung,exynos5433-decon", "samsung,exynos5433-decon-tv";
-- reg: physical base address and length of the DECON registers set.
-- interrupt-names: should contain the interrupt names depending on mode of work:
-		video mode: "vsync",
-		command mode: "lcd_sys",
-		command mode with software trigger: "lcd_sys", "te".
-- interrupts or interrupts-extended: list of interrupt specifiers corresponding
-		to names privided in interrupt-names, as described in
-		interrupt-controller/interrupts.txt
-- clocks: must include clock specifiers corresponding to entries in the
-	  clock-names property.
-- clock-names: list of clock names sorted in the same order as the clocks
-	       property. Must contain "pclk", "aclk_decon", "aclk_smmu_decon0x",
-	       "aclk_xiu_decon0x", "pclk_smmu_decon0x", "aclk_smmu_decon1x",
-	       "aclk_xiu_decon1x", "pclk_smmu_decon1x", clk_decon_vclk",
-	       "sclk_decon_eclk"
-- ports: contains a port which is connected to mic node. address-cells and
-	 size-cells must 1 and 0, respectively.
-- port: contains an endpoint node which is connected to the endpoint in the mic
-	node. The reg value muset be 0.
-
-Example:
-SoC specific DT entry:
-decon: decon@13800000 {
-	compatible = "samsung,exynos5433-decon";
-	reg = <0x13800000 0x2104>;
-	clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
-		<&cmu_disp CLK_ACLK_XIU_DECON0X>,
-		<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
-		<&cmu_disp CLK_ACLK_SMMU_DECON1X>,
-		<&cmu_disp CLK_ACLK_XIU_DECON1X>,
-		<&cmu_disp CLK_PCLK_SMMU_DECON1X>,
-		<&cmu_disp CLK_SCLK_DECON_VCLK>,
-		<&cmu_disp CLK_SCLK_DECON_ECLK>;
-	clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x",
-		"pclk_smmu_decon0x", "aclk_smmu_decon1x", "aclk_xiu_decon1x",
-		"pclk_smmu_decon1x", "sclk_decon_vclk", "sclk_decon_eclk";
-	interrupt-names = "vsync", "lcd_sys";
-	interrupts = <0 202 0>, <0 203 0>;
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			decon_to_mic: endpoint {
-				remote-endpoint = <&mic_to_decon>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
deleted file mode 100644
index 53912c99ec38..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
+++ /dev/null
@@ -1,65 +0,0 @@
-Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON)
-
-DECON (Display and Enhancement Controller) is the Display Controller for the
-Exynos7 series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be "samsung,exynos7-decon";
-
-- reg: physical base address and length of the DECON registers set.
-
-- interrupts: should contain a list of all DECON IP block interrupts in the
-		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
-		 format depends on the interrupt controller used.
-
-- interrupt-names: should contain the interrupt names: "fifo", "vsync",
-	"lcd_sys", in the same order as they were listed in the interrupts
-        property.
-
-- pinctrl-0: pin control group to be used for this controller.
-
-- pinctrl-names: must contain a "default" entry.
-
-- clocks: must include clock specifiers corresponding to entries in the
-         clock-names property.
-
-- clock-names: list of clock names sorted in the same order as the clocks
-               property. Must contain "pclk_decon0", "aclk_decon0",
-	       "decon0_eclk", "decon0_vclk".
-- i80-if-timings: timing configuration for lcd i80 interface support.
-
-Optional Properties:
-- power-domains: a phandle to DECON power domain node.
-- display-timings: timing settings for DECON, as described in document [1].
-		Can be used in case timings cannot be provided otherwise
-		or to override timings provided by the panel.
-
-[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
-
-Example:
-
-SoC specific DT entry:
-
-	decon@13930000 {
-		compatible = "samsung,exynos7-decon";
-		interrupt-parent = <&combiner>;
-		reg = <0x13930000 0x1000>;
-		interrupt-names = "lcd_sys", "vsync", "fifo";
-		interrupts = <0 188 0>, <0 189 0>, <0 190 0>;
-		clocks = <&clock_disp PCLK_DECON_INT>,
-			 <&clock_disp ACLK_DECON_INT>,
-			 <&clock_disp SCLK_DECON_INT_ECLK>,
-			 <&clock_disp SCLK_DECON_INT_EXTCLKPLL>;
-		clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk",
-				"decon0_vclk";
-		status = "disabled";
-	};
-
-Board specific DT entry:
-
-	decon@13930000 {
-		pinctrl-0 = <&lcd_clk &pwm1_out>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 9b6cba3f82af..3a401590320f 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -50,7 +50,7 @@ Optional properties for dp-controller:
 		Documentation/devicetree/bindings/display/panel/display-timing.txt
 
 For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+ * Documentation/devicetree/bindings/display/bridge/analogix,dp.yaml
 	-phys (required)
 	-phy-names (required)
 	-hpd-gpios (optional)
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
deleted file mode 100644
index be377786e8cd..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-Exynos MIPI DSI Master
-
-Required properties:
-  - compatible: value should be one of the following
-		"samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */
-		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
-		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
-		"samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
-		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
-  - reg: physical base address and length of the registers set for the device
-  - interrupts: should contain DSI interrupt
-  - clocks: list of clock specifiers, must contain an entry for each required
-    entry in clock-names
-  - clock-names: should include "bus_clk"and "sclk_mipi" entries
-		 the use of "pll_clk" is deprecated
-  - phys: list of phy specifiers, must contain an entry for each required
-    entry in phy-names
-  - phy-names: should include "dsim" entry
-  - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V)
-  - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
-  - samsung,pll-clock-frequency: specifies frequency of the oscillator clock
-  - #address-cells, #size-cells: should be set respectively to <1> and <0>
-    according to DSI host bindings (see MIPI DSI bindings [1])
-  - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
-    mode
-  - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
-
-Optional properties:
-  - power-domains: a phandle to DSIM power domain node
-
-Child nodes:
-  Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
-
-Video interfaces:
-  Device node can contain following video interface port nodes according to [2]:
-  0: RGB input,
-  1: DSI output
-
-[1]: Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-	dsi@11c80000 {
-		compatible = "samsung,exynos4210-mipi-dsi";
-		reg = <0x11C80000 0x10000>;
-		interrupts = <0 79 0>;
-		clocks = <&clock 286>, <&clock 143>;
-		clock-names = "bus_clk", "sclk_mipi";
-		phys = <&mipi_phy 1>;
-		phy-names = "dsim";
-		vddcore-supply = <&vusb_reg>;
-		vddio-supply = <&vmipi_reg>;
-		power-domains = <&pd_lcd0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,pll-clock-frequency = <24000000>;
-
-		panel@1 {
-			reg = <0>;
-			...
-			port {
-				panel_ep: endpoint {
-					remote-endpoint = <&dsi_ep>;
-				};
-			};
-		};
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				decon_to_mic: endpoint {
-					remote-endpoint = <&mic_to_decon>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				dsi_ep: endpoint {
-					reg = <0>;
-					samsung,burst-clock-frequency = <500000000>;
-					samsung,esc-clock-frequency = <20000000>;
-					remote-endpoint = <&panel_ep>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
deleted file mode 100644
index 58b12e25bbb1..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Device-Tree bindings for drm hdmi driver
-
-Required properties:
-- compatible: value should be one among the following:
-	1) "samsung,exynos4210-hdmi"
-	2) "samsung,exynos4212-hdmi"
-	3) "samsung,exynos5420-hdmi"
-	4) "samsung,exynos5433-hdmi"
-- reg: physical base address of the hdmi and length of memory mapped
-	region.
-- interrupts: interrupt number to the cpu.
-- hpd-gpios: following information about the hotplug gpio pin.
-	a) phandle of the gpio controller node.
-	b) pin number within the gpio controller.
-	c) optional flags and pull up/down.
-- ddc: phandle to the hdmi ddc node
-- phy: phandle to the hdmi phy node
-- samsung,syscon-phandle: phandle for system controller node for PMU.
-- #sound-dai-cells: should be 0.
-
-Required properties for Exynos 4210, 4212, 5420 and 5433:
-- clocks: list of clock IDs from SoC clock driver.
-	a) hdmi: Gate of HDMI IP bus clock.
-	b) sclk_hdmi: Gate of HDMI special clock.
-	c) sclk_pixel: Pixel special clock, one of the two possible inputs of
-		HDMI clock mux.
-	d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of
-		HDMI clock mux.
-	e) mout_hdmi: It is required by the driver to switch between the 2
-		parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
-		after configuration, parent is set to sclk_hdmiphy else
-		sclk_pixel.
-- clock-names: aliases as per driver requirements for above clock IDs:
-	"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
-
-Required properties for Exynos 5433:
-- clocks: list of clock specifiers according to common clock bindings.
-	a) hdmi_pclk: Gate of HDMI IP APB bus.
-	b) hdmi_i_pclk: Gate of HDMI-PHY IP APB bus.
-	d) i_tmds_clk: Gate of HDMI TMDS clock.
-	e) i_pixel_clk: Gate of HDMI pixel clock.
-	f) i_spdif_clk: Gate of HDMI SPDIF clock.
-	g) oscclk: Oscillator clock, used as parent of following *_user clocks
-		in case HDMI-PHY is not operational.
-	h) tmds_clko: TMDS clock generated by HDMI-PHY.
-	i) tmds_clko_user: MUX used to switch between oscclk and tmds_clko,
-		respectively if HDMI-PHY is off and operational.
-	j) pixel_clko: Pixel clock generated by HDMI-PHY.
-	k) pixel_clko_user: MUX used to switch between oscclk and pixel_clko,
-		respectively if HDMI-PHY is off and operational.
-- clock-names: aliases for above clock specfiers.
-- samsung,sysreg: handle to syscon used to control the system registers.
-
-Example:
-
-	hdmi {
-		compatible = "samsung,exynos4212-hdmi";
-		reg = <0x14530000 0x100000>;
-		interrupts = <0 95 0>;
-		hpd-gpios = <&gpx3 7 1>;
-		ddc = <&hdmi_ddc_node>;
-		phy = <&hdmi_phy_node>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt
deleted file mode 100644
index 41eee971562b..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiddc.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Device-Tree bindings for hdmiddc driver
-
-Required properties:
-- compatible: value should be one of the following
-	1) "samsung,exynos5-hdmiddc" <DEPRECATED>
-	2) "samsung,exynos4210-hdmiddc"
-
-- reg: I2C address of the hdmiddc device.
-
-Example:
-
-	hdmiddc {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt
deleted file mode 100644
index 162f641f7639..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmiphy.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-Device-Tree bindings for hdmiphy driver
-
-Required properties:
-- compatible: value should be one of the following:
-	1) "samsung,exynos5-hdmiphy" <DEPRECATED>
-	2) "samsung,exynos4210-hdmiphy".
-	3) "samsung,exynos4212-hdmiphy".
-- reg: I2C address of the hdmiphy device.
-
-Example:
-
-	hdmiphy {
-		compatible = "samsung,exynos4210-hdmiphy";
-		reg = <0x38>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt b/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt
deleted file mode 100644
index 3e38128f866b..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/exynos_mixer.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Device-Tree bindings for mixer driver
-
-Required properties:
-- compatible: value should be one of the following:
-	1) "samsung,exynos5-mixer" <DEPRECATED>
-	2) "samsung,exynos4210-mixer"
-	3) "samsung,exynos4212-mixer"
-	4) "samsung,exynos5250-mixer"
-	5) "samsung,exynos5420-mixer"
-
-- reg: physical base address of the mixer and length of memory mapped
-	region.
-- interrupts: interrupt number to the cpu.
-- clocks: list of clock IDs from SoC clock driver.
-	a) mixer: Gate of Mixer IP bus clock.
-	b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of
-               mixer mux.
-	c) hdmi: Gate of HDMI IP bus clock, needed together with sclk_hdmi.
-
-Example:
-
-	mixer {
-		compatible = "samsung,exynos5250-mixer";
-		reg = <0x14450000 0x10000>;
-		interrupts = <0 94 0>;
-	};
diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
deleted file mode 100644
index b3096421d42b..000000000000
--- a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-Device-Tree bindings for Samsung SoC display controller (FIMD)
-
-FIMD (Fully Interactive Mobile Display) is the Display Controller for the
-Samsung series of SoCs which transfers the image data from a video memory
-buffer to an external LCD interface.
-
-Required properties:
-- compatible: value should be one of the following
-		"samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
-		"samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
-		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
-		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
-		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
-		"samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */
-		"samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */
-
-- reg: physical base address and length of the FIMD registers set.
-
-- interrupts: should contain a list of all FIMD IP block interrupts in the
-		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
-		 format depends on the interrupt controller used.
-
-- interrupt-names: should contain the interrupt names: "fifo", "vsync",
-	"lcd_sys", in the same order as they were listed in the interrupts
-        property.
-
-- pinctrl-0: pin control group to be used for this controller.
-
-- pinctrl-names: must contain a "default" entry.
-
-- clocks: must include clock specifiers corresponding to entries in the
-         clock-names property.
-
-- clock-names: list of clock names sorted in the same order as the clocks
-               property. Must contain "sclk_fimd" and "fimd".
-
-Optional Properties:
-- power-domains: a phandle to FIMD power domain node.
-- samsung,invert-vden: video enable signal is inverted
-- samsung,invert-vclk: video clock signal is inverted
-- display-timings: timing settings for FIMD, as described in document [1].
-		Can be used in case timings cannot be provided otherwise
-		or to override timings provided by the panel.
-- samsung,sysreg: handle to syscon used to control the system registers
-- i80-if-timings: timing configuration for lcd i80 interface support.
-  - cs-setup: clock cycles for the active period of address signal is enabled
-              until chip select is enabled.
-              If not specified, the default value(0) will be used.
-  - wr-setup: clock cycles for the active period of CS signal is enabled until
-              write signal is enabled.
-              If not specified, the default value(0) will be used.
-  - wr-active: clock cycles for the active period of CS is enabled.
-               If not specified, the default value(1) will be used.
-  - wr-hold: clock cycles for the active period of CS is disabled until write
-             signal is disabled.
-             If not specified, the default value(0) will be used.
-
-  The parameters are defined as:
-
-    VCLK(internal)  __|??????|_____|??????|_____|??????|_____|??????|_____|??
-                      :            :            :            :            :
-    Address Output  --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX
-                      | cs-setup+1 |            :            :            :
-                      |<---------->|            :            :            :
-    Chip Select     ???????????????|____________:____________:____________|??
-                                   | wr-setup+1 |            | wr-hold+1  |
-                                   |<---------->|            |<---------->|
-    Write Enable    ????????????????????????????|____________|???????????????
-                                                | wr-active+1|
-                                                |<---------->|
-    Video Data      ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>--
-
-The device node can contain 'port' child nodes according to the bindings defined
-in [2]. The following are properties specific to those nodes:
-- reg: (required) port index, can be:
-		0 - for CAMIF0 input,
-		1 - for CAMIF1 input,
-		2 - for CAMIF2 input,
-		3 - for parallel output,
-		4 - for write-back interface
-
-[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
-[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
-
-Example:
-
-SoC specific DT entry:
-
-	fimd@11c00000 {
-		compatible = "samsung,exynos4210-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x11c00000 0x20000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <11 0>, <11 1>, <11 2>;
-		clocks = <&clock 140>, <&clock 283>;
-		clock-names = "sclk_fimd", "fimd";
-		power-domains = <&pd_lcd0>;
-		status = "disabled";
-	};
-
-Board specific DT entry:
-
-	fimd@11c00000 {
-		pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
index 900a56cae80e..75b4efd70ba8 100644
--- a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
+++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
@@ -20,6 +20,7 @@ properties:
           - fsl,imx23-lcdif
           - fsl,imx28-lcdif
           - fsl,imx6sx-lcdif
+          - fsl,imx8mp-lcdif
       - items:
           - enum:
               - fsl,imx6sl-lcdif
@@ -51,6 +52,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description: The LCDIF output port
@@ -80,12 +84,48 @@ allOf:
           maxItems: 3
       required:
         - clock-names
-    else:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-lcdif
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          minItems: 3
+          maxItems: 3
+      required:
+        - clock-names
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - fsl,imx6sx-lcdif
+                - fsl,imx8mp-lcdif
+    then:
       properties:
         clocks:
           maxItems: 1
         clock-names:
           maxItems: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6sl-lcdif
+              - fsl,imx6sx-lcdif
+              - fsl,imx8mm-lcdif
+              - fsl,imx8mn-lcdif
+              - fsl,imx8mp-lcdif
+    then:
+      required:
+        - power-domains
 
 examples:
   - |
@@ -100,6 +140,7 @@ examples:
                  <&clks IMX6SX_CLK_LCDIF_APB>,
                  <&clks IMX6SX_CLK_DISPLAY_AXI>;
         clock-names = "pix", "axi", "disp_axi";
+        power-domains = <&pd_disp>;
 
         port {
             endpoint {
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
deleted file mode 100644
index 169b32e4ee4e..000000000000
--- a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Ilitek ILI9341 display panels
-
-This binding is for display panels using an Ilitek ILI9341 controller in SPI
-mode.
-
-Required properties:
-- compatible:	"adafruit,yx240qv29", "ilitek,ili9341"
-- dc-gpios:	D/C pin
-- reset-gpios:	Reset pin
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in ../spi/spi-bus.txt must be specified.
-
-Optional properties:
-- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
-- backlight:	phandle of the backlight device attached to the panel
-
-Example:
-	display@0{
-		compatible = "adafruit,yx240qv29", "ilitek,ili9341";
-		reg = <0>;
-		spi-max-frequency = <32000000>;
-		dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
-		rotation = <270>;
-		backlight = <&backlight>;
-	};
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
index aecff34f505d..1f8f2182e2f1 100644
--- a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
+++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/ilitek,ili9486.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ilitek ILI9486 display panels device tree bindings
+title: Ilitek ILI9486 display panels
 
 maintainers:
   - Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
deleted file mode 100644
index f4df9e83bcd2..000000000000
--- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Freescale imx21 Framebuffer
-
-This framebuffer driver supports devices imx1, imx21, imx25, and imx27.
-
-Required properties:
-- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21
-- reg : Should contain 1 register ranges(address and length)
-- interrupts : One interrupt of the fb dev
-
-Required nodes:
-- display: Phandle to a display node as described in
-	Documentation/devicetree/bindings/display/panel/display-timing.txt
-	Additional, the display node has to define properties:
-	- bits-per-pixel: Bits per pixel
-	- fsl,pcr: LCDC PCR value
-	A display node may optionally define
-	- fsl,aus-mode: boolean to enable AUS mode (only for imx21)
-
-Optional properties:
-- lcd-supply: Regulator for LCD supply voltage.
-- fsl,dmacr: DMA Control Register value. This is optional. By default, the
-	register is not modified as recommended by the datasheet.
-- fsl,lpccr: Contrast Control Register value. This property provides the
-	default value for the contrast control register.
-	If that property is omitted, the register is zeroed.
-- fsl,lscr1: LCDC Sharp Configuration Register value.
-
-Example:
-
-	imxfb: fb@10021000 {
-		compatible = "fsl,imx21-fb";
-		interrupts = <61>;
-		reg = <0x10021000 0x1000>;
-		display = <&display0>;
-	};
-
-	...
-
-	display0: display0 {
-		model = "Primeview-PD050VL1";
-		bits-per-pixel = <16>;
-		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
-		display-timings {
-			native-mode = <&timing_disp0>;
-			timing_disp0: 640x480 {
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <112>;
-				hfront-porch = <36>;
-				hsync-len = <32>;
-				vback-porch = <33>;
-				vfront-porch = <33>;
-				vsync-len = <2>;
-				clock-frequency = <25000000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml
new file mode 100644
index 000000000000..c2b29622bceb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx-lcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX LCD Controller, found on i.MX1, i.MX21, i.MX25 and i.MX27
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+  - Pengutronix Kernel Team <kernel@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx1-fb
+          - fsl,imx21-fb
+      - items:
+          - enum:
+              - fsl,imx25-fb
+              - fsl,imx27-fb
+          - const: fsl,imx21-fb
+      - items:
+          - const: fsl,imx25-lcdc
+          - const: fsl,imx21-lcdc
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: ahb
+      - const: per
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+  display:
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  lcd-supply:
+    description:
+      Regulator for LCD supply voltage.
+
+  fsl,dmacr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Override value for DMA Control Register
+
+  fsl,lpccr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Contrast Control Register value.
+
+  fsl,lscr1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      LCDC Sharp Configuration Register value.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx1-lcdc
+              - fsl,imx21-lcdc
+    then:
+      properties:
+        display: false
+        fsl,dmacr: false
+        fsl,lpccr: false
+        fsl,lscr1: false
+
+      required:
+        - port
+
+    else:
+      properties:
+        port: false
+
+      required:
+        - display
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    lcdc@53fbc000 {
+        compatible = "fsl,imx25-lcdc", "fsl,imx21-lcdc";
+        reg = <0x53fbc000 0x4000>;
+        interrupts = <39>;
+        clocks = <&clks 103>, <&clks 66>, <&clks 49>;
+        clock-names = "ipg", "ahb", "per";
+
+        port {
+            parallel_out: endpoint {
+              remote-endpoint = <&panel_in>;
+            };
+        };
+    };
+  - |
+    imxfb: fb@10021000 {
+        compatible = "fsl,imx21-fb";
+        interrupts = <61>;
+        reg = <0x10021000 0x1000>;
+        display = <&display0>;
+        clocks = <&clks 103>, <&clks 49>, <&clks 66>;
+        clock-names = "ipg", "ahb", "per";
+    };
+
+    display0: display0 {
+        model = "Primeview-PD050VL1";
+        bits-per-pixel = <16>;
+        fsl,pcr = <0xf0c88080>; /* non-standard but required */
+
+        display-timings {
+            native-mode = <&timing_disp0>;
+            timing_disp0: timing0 {
+                hactive = <640>;
+                vactive = <480>;
+                hback-porch = <112>;
+                hfront-porch = <36>;
+                hsync-len = <32>;
+                vback-porch = <33>;
+                vfront-porch = <33>;
+                vsync-len = <2>;
+                clock-frequency = <25000000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
index 0091df9dd73b..4ae6328cde64 100644
--- a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
+++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 NXP
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: iMX8MQ Display Controller Subsystem (DCSS)
 
@@ -105,4 +105,3 @@ examples:
             };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
index e679f48a3886..319bd7c88fe3 100644
--- a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
+++ b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/ingenic,ipu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs Image Processing Unit (IPU) devicetree bindings
+title: Ingenic SoCs Image Processing Unit (IPU)
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
@@ -45,7 +45,7 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4770-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4770-cgu.h>
     ipu@13080000 {
       compatible = "ingenic,jz4770-ipu", "ingenic,jz4760-ipu";
       reg = <0x13080000 0x800>;
diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
index 50d2b0a50e8a..6d4c00f3fcc8 100644
--- a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
+++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/ingenic,lcd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs LCD controller devicetree bindings
+title: Ingenic SoCs LCD controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
@@ -17,6 +17,8 @@ properties:
     enum:
       - ingenic,jz4740-lcd
       - ingenic,jz4725b-lcd
+      - ingenic,jz4760-lcd
+      - ingenic,jz4760b-lcd
       - ingenic,jz4770-lcd
       - ingenic,jz4780-lcd
 
@@ -88,7 +90,7 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4740-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
     lcd-controller@13050000 {
       compatible = "ingenic,jz4740-lcd";
       reg = <0x13050000 0x1000>;
@@ -107,7 +109,7 @@ examples:
     };
 
   - |
-    #include <dt-bindings/clock/jz4725b-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4725b-cgu.h>
     lcd-controller@13050000 {
       compatible = "ingenic,jz4725b-lcd";
       reg = <0x13050000 0x1000>;
diff --git a/Documentation/devicetree/bindings/display/intel,keembay-display.yaml b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml
index bc6622b010ca..2cf54ecc707a 100644
--- a/Documentation/devicetree/bindings/display/intel,keembay-display.yaml
+++ b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/intel,keembay-display.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Devicetree bindings for Intel Keem Bay display controller
+title: Intel Keem Bay display controller
 
 maintainers:
   - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
diff --git a/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml b/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml
index a222b52d8b8f..cc7e1f318fe4 100644
--- a/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml
+++ b/Documentation/devicetree/bindings/display/intel,keembay-msscam.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/intel,keembay-msscam.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Devicetree bindings for Intel Keem Bay MSSCAM
+title: Intel Keem Bay MSSCAM
 
 maintainers:
   - Anitha Chrisanthus <anitha.chrisanthus@intel.com>
diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/lvds.yaml
index 49460c9dceea..7cd2ce7e9c33 100644
--- a/Documentation/devicetree/bindings/display/panel/lvds.yaml
+++ b/Documentation/devicetree/bindings/display/lvds.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/display/panel/lvds.yaml#
+$id: http://devicetree.org/schemas/display/lvds.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: LVDS Display Panel
+title: LVDS Display Common Properties
 
 maintainers:
   - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
@@ -13,8 +13,8 @@ maintainers:
 description: |+
   LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
   incompatible data link layers have been used over time to transmit image data
-  to LVDS panels. This bindings supports display panels compatible with the
-  following specifications.
+  to LVDS devices. This bindings supports devices compatible with the following
+  specifications.
 
   [JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
   1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
@@ -26,18 +26,7 @@ description: |+
   Device compatible with those specifications have been marketed under the
   FPD-Link and FlatLink brands.
 
-allOf:
-  - $ref: panel-common.yaml#
-
 properties:
-  compatible:
-    contains:
-      const: panel-lvds
-    description:
-      Shall contain "panel-lvds" in addition to a mandatory panel-specific
-      compatible string defined in individual panel bindings. The "panel-lvds"
-      value shall never be used on its own.
-
   data-mapping:
     enum:
       - jeida-18
@@ -96,22 +85,6 @@ properties:
       If set, reverse the bit order described in the data mappings below on all
       data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
 
-  port: true
-  ports: true
-
-required:
-  - compatible
-  - data-mapping
-  - width-mm
-  - height-mm
-  - panel-timing
-
-oneOf:
-  - required:
-      - port
-  - required:
-      - ports
-
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
new file mode 100644
index 000000000000..92741486c24d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,aal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display adaptive ambient light processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display adaptive ambient light processor, namely AAL,
+  is responsible for backlight power saving and sunlight visibility improving.
+  AAL device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-aal
+          - mediatek,mt8183-disp-aal
+      - items:
+          - enum:
+              - mediatek,mt2712-disp-aal
+          - const: mediatek,mt8173-disp-aal
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-aal
+              - mediatek,mt8188-disp-aal
+              - mediatek,mt8192-disp-aal
+              - mediatek,mt8195-disp-aal
+          - const: mediatek,mt8183-disp-aal
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: AAL Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        aal@14015000 {
+           compatible = "mediatek,mt8173-disp-aal";
+           reg = <0 0x14015000 0 0x1000>;
+           interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
+           power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+           clocks = <&mmsys CLK_MM_DISP_AAL>;
+           mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x5000 0x1000>;
+       };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
new file mode 100644
index 000000000000..8c2a737237f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ccorr.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ccorr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display color correction
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display color correction, namely CCORR, reproduces correct color
+  on panels with different color gamut.
+  CCORR device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8183-disp-ccorr
+          - mediatek,mt8192-disp-ccorr
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-ccorr
+              - mediatek,mt8188-disp-ccorr
+              - mediatek,mt8195-disp-ccorr
+          - const: mediatek,mt8192-disp-ccorr
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: CCORR Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ccorr0: ccorr@1400f000 {
+            compatible = "mediatek,mt8183-disp-ccorr";
+            reg = <0 0x1400f000 0 0x1000>;
+            interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml
index 66288b9f0aa6..080cf321209e 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,cec.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,cec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek HDMI CEC Controller Device Tree Bindings
+title: Mediatek HDMI CEC Controller
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
new file mode 100644
index 000000000000..d0ea77fc4b06
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,color.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display color processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display color processor, namely COLOR, provides hue, luma and
+  saturation adjustments to get better picture quality and to have one panel
+  resemble the other in their output characteristics.
+  COLOR device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-disp-color
+          - mediatek,mt8167-disp-color
+          - mediatek,mt8173-disp-color
+      - items:
+          - enum:
+              - mediatek,mt7623-disp-color
+              - mediatek,mt2712-disp-color
+          - const: mediatek,mt2701-disp-color
+      - items:
+          - enum:
+              - mediatek,mt8183-disp-color
+              - mediatek,mt8186-disp-color
+              - mediatek,mt8188-disp-color
+              - mediatek,mt8192-disp-color
+              - mediatek,mt8195-disp-color
+          - const: mediatek,mt8173-disp-color
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: COLOR Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        color0: color@14013000 {
+            compatible = "mediatek,mt8173-disp-color";
+            reg = <0 0x14013000 0 0x1000>;
+            interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x3000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
deleted file mode 100644
index 78044c340e20..000000000000
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ /dev/null
@@ -1,219 +0,0 @@
-Mediatek display subsystem
-==========================
-
-The Mediatek display subsystem consists of various DISP function blocks in the
-MMSYS register space. The connections between them can be configured by output
-and input selectors in the MMSYS_CONFIG register space. Pixel clock and start
-of frame signal are distributed to the other function blocks by a DISP_MUTEX
-function block.
-
-All DISP device tree nodes must be siblings to the central MMSYS_CONFIG node.
-For a description of the MMSYS_CONFIG binding, see
-Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml.
-
-DISP function blocks
-====================
-
-A display stream starts at a source function block that reads pixel data from
-memory and ends with a sink function block that drives pixels on a display
-interface, or writes pixels back to memory. All DISP function blocks have
-their own register space, interrupt, and clock gate. The blocks that can
-access memory additionally have to list the IOMMU and local arbiter they are
-connected to.
-
-For a description of the display interface sink function blocks, see
-Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and
-Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml.
-
-Required properties (all function blocks):
-- compatible: "mediatek,<chip>-disp-<function>", one of
-	"mediatek,<chip>-disp-ovl"   		- overlay (4 layers, blending, csc)
-	"mediatek,<chip>-disp-ovl-2l"           - overlay (2 layers, blending, csc)
-	"mediatek,<chip>-disp-rdma"  		- read DMA / line buffer
-	"mediatek,<chip>-disp-wdma"  		- write DMA
-	"mediatek,<chip>-disp-ccorr"            - color correction
-	"mediatek,<chip>-disp-color" 		- color processor
-	"mediatek,<chip>-disp-dither"           - dither
-	"mediatek,<chip>-disp-aal"   		- adaptive ambient light controller
-	"mediatek,<chip>-disp-gamma" 		- gamma correction
-	"mediatek,<chip>-disp-merge" 		- merge streams from two RDMA sources
-	"mediatek,<chip>-disp-postmask" 	- control round corner for display frame
-	"mediatek,<chip>-disp-split" 		- split stream to two encoders
-	"mediatek,<chip>-disp-ufoe"  		- data compression engine
-	"mediatek,<chip>-dsi"        		- DSI controller, see mediatek,dsi.txt
-	"mediatek,<chip>-dpi"        		- DPI controller, see mediatek,dpi.txt
-	"mediatek,<chip>-disp-mutex" 		- display mutex
-	"mediatek,<chip>-disp-od"    		- overdrive
-  the supported chips are mt2701, mt7623, mt2712, mt8167, mt8173, mt8183 and mt8192.
-- reg: Physical base address and length of the function block register space
-- interrupts: The interrupt signal from the function block (required, except for
-  merge and split function blocks).
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-  For most function blocks this is just a single clock input. Only the DSI and
-  DPI controller nodes have multiple clock inputs. These are documented in
-  mediatek,dsi.txt and mediatek,dpi.txt, respectively.
-  An exception is that the mt8183 mutex is always free running with no clocks property.
-
-Required properties (DMA function blocks):
-- compatible: Should be one of
-	"mediatek,<chip>-disp-ovl"
-	"mediatek,<chip>-disp-rdma"
-	"mediatek,<chip>-disp-wdma"
-  the supported chips are mt2701, mt8167 and mt8173.
-- larb: Should contain a phandle pointing to the local arbiter device as defined
-  in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-- iommus: Should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
-  for details.
-
-Optional properties (RDMA function blocks):
-- mediatek,rdma-fifo-size: rdma fifo size may be different even in same SOC, add this
-  property to the corresponding rdma
-  the value is the Max value which defined in hardware data sheet.
-  mediatek,rdma-fifo-size of mt8173-rdma0 is 8K
-  mediatek,rdma-fifo-size of mt8183-rdma0 is 5K
-  mediatek,rdma-fifo-size of mt8183-rdma1 is 2K
-
-Examples:
-
-mmsys: clock-controller@14000000 {
-	compatible = "mediatek,mt8173-mmsys", "syscon";
-	reg = <0 0x14000000 0 0x1000>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	#clock-cells = <1>;
-};
-
-ovl0: ovl@1400c000 {
-	compatible = "mediatek,mt8173-disp-ovl";
-	reg = <0 0x1400c000 0 0x1000>;
-	interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_OVL0>;
-	iommus = <&iommu M4U_PORT_DISP_OVL0>;
-	mediatek,larb = <&larb0>;
-};
-
-ovl1: ovl@1400d000 {
-	compatible = "mediatek,mt8173-disp-ovl";
-	reg = <0 0x1400d000 0 0x1000>;
-	interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_OVL1>;
-	iommus = <&iommu M4U_PORT_DISP_OVL1>;
-	mediatek,larb = <&larb4>;
-};
-
-rdma0: rdma@1400e000 {
-	compatible = "mediatek,mt8173-disp-rdma";
-	reg = <0 0x1400e000 0 0x1000>;
-	interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_RDMA0>;
-	iommus = <&iommu M4U_PORT_DISP_RDMA0>;
-	mediatek,larb = <&larb0>;
-	mediatek,rdma-fifosize = <8192>;
-};
-
-rdma1: rdma@1400f000 {
-	compatible = "mediatek,mt8173-disp-rdma";
-	reg = <0 0x1400f000 0 0x1000>;
-	interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_RDMA1>;
-	iommus = <&iommu M4U_PORT_DISP_RDMA1>;
-	mediatek,larb = <&larb4>;
-};
-
-rdma2: rdma@14010000 {
-	compatible = "mediatek,mt8173-disp-rdma";
-	reg = <0 0x14010000 0 0x1000>;
-	interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_RDMA2>;
-	iommus = <&iommu M4U_PORT_DISP_RDMA2>;
-	mediatek,larb = <&larb4>;
-};
-
-wdma0: wdma@14011000 {
-	compatible = "mediatek,mt8173-disp-wdma";
-	reg = <0 0x14011000 0 0x1000>;
-	interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_WDMA0>;
-	iommus = <&iommu M4U_PORT_DISP_WDMA0>;
-	mediatek,larb = <&larb0>;
-};
-
-wdma1: wdma@14012000 {
-	compatible = "mediatek,mt8173-disp-wdma";
-	reg = <0 0x14012000 0 0x1000>;
-	interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_WDMA1>;
-	iommus = <&iommu M4U_PORT_DISP_WDMA1>;
-	mediatek,larb = <&larb4>;
-};
-
-color0: color@14013000 {
-	compatible = "mediatek,mt8173-disp-color";
-	reg = <0 0x14013000 0 0x1000>;
-	interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_COLOR0>;
-};
-
-color1: color@14014000 {
-	compatible = "mediatek,mt8173-disp-color";
-	reg = <0 0x14014000 0 0x1000>;
-	interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_COLOR1>;
-};
-
-aal@14015000 {
-	compatible = "mediatek,mt8173-disp-aal";
-	reg = <0 0x14015000 0 0x1000>;
-	interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_AAL>;
-};
-
-gamma@14016000 {
-	compatible = "mediatek,mt8173-disp-gamma";
-	reg = <0 0x14016000 0 0x1000>;
-	interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_GAMMA>;
-};
-
-ufoe@1401a000 {
-	compatible = "mediatek,mt8173-disp-ufoe";
-	reg = <0 0x1401a000 0 0x1000>;
-	interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_UFOE>;
-};
-
-dsi0: dsi@1401b000 {
-	/* See mediatek,dsi.txt for details */
-};
-
-dpi0: dpi@1401d000 {
-	/* See mediatek,dpi.txt for details */
-};
-
-mutex: mutex@14020000 {
-	compatible = "mediatek,mt8173-disp-mutex";
-	reg = <0 0x14020000 0 0x1000>;
-	interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_MUTEX_32K>;
-};
-
-od@14023000 {
-	compatible = "mediatek,mt8173-disp-od";
-	reg = <0 0x14023000 0 0x1000>;
-	power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-	clocks = <&mmsys CLK_MM_DISP_OD>;
-};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
new file mode 100644
index 000000000000..1588b3f7cec7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dither.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dither.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display dither processor
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display dither processor, namely DITHER, works by approximating
+  unavailable colors with available colors and by mixing and matching available
+  colors to mimic unavailable ones.
+  DITHER device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8183-disp-dither
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-dither
+              - mediatek,mt8188-disp-dither
+              - mediatek,mt8192-disp-dither
+              - mediatek,mt8195-disp-dither
+          - const: mediatek,mt8183-disp-dither
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: DITHER Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dither0: dither@14012000 {
+            compatible = "mediatek,mt8183-disp-dither";
+            reg = <0 0x14012000 0 0x1000>;
+            interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
new file mode 100644
index 000000000000..ff781f2174a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Display Port Controller
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Jitao shi <jitao.shi@mediatek.com>
+
+description: |
+  MediaTek DP and eDP are different hardwares and there are some features
+  which are not supported for eDP. For example, audio is not supported for
+  eDP. Therefore, we need to use two different compatibles to describe them.
+  In addition, We just need to enable the power domain of DP, so the clock
+  of DP is generated by itself and we are not using other PLL to generate
+  clocks.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-dp-tx
+      - mediatek,mt8195-edp-tx
+
+  reg:
+    maxItems: 1
+
+  nvmem-cells:
+    maxItems: 1
+    description: efuse data for display port calibration
+
+  nvmem-cell-names:
+    const: dp_calibration_data
+
+  power-domains:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input endpoint of the controller, usually dp_intf
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output endpoint of the controller
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                description: |
+                  number of lanes supported by the hardware.
+                  The possible values:
+                  0       - For 1 lane enabled in IP.
+                  0 1     - For 2 lanes enabled in IP.
+                  0 1 2 3 - For 4 lanes enabled in IP.
+                minItems: 1
+                maxItems: 4
+            required:
+              - data-lanes
+
+    required:
+      - port@0
+      - port@1
+
+  max-linkrate-mhz:
+    enum: [ 1620, 2700, 5400, 8100 ]
+    description: maximum link rate supported by the hardware.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - ports
+  - max-linkrate-mhz
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    dptx@1c600000 {
+        compatible = "mediatek,mt8195-dp-tx";
+        reg = <0x1c600000 0x8000>;
+        power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
+        interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
+        max-linkrate-mhz = <8100>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dptx_in: endpoint {
+                    remote-endpoint = <&dp_intf0_out>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                dptx_out: endpoint {
+                    data-lanes = <0 1 2 3>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index dd2896a40ff0..d976380801e3 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -4,16 +4,16 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: mediatek DPI Controller Device Tree Bindings
+title: MediaTek DPI and DP_INTF Controller
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
   - Jitao shi <jitao.shi@mediatek.com>
 
 description: |
-  The Mediatek DPI function block is a sink of the display subsystem and
-  provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
-  output bus.
+  The MediaTek DPI and DP_INTF function blocks are a sink of the display
+  subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a
+  parallel output bus.
 
 properties:
   compatible:
@@ -22,7 +22,10 @@ properties:
       - mediatek,mt7623-dpi
       - mediatek,mt8173-dpi
       - mediatek,mt8183-dpi
+      - mediatek,mt8186-dpi
+      - mediatek,mt8188-dp-intf
       - mediatek,mt8192-dpi
+      - mediatek,mt8195-dp-intf
 
   reg:
     maxItems: 1
@@ -54,7 +57,7 @@ properties:
     $ref: /schemas/graph.yaml#/properties/port
     description:
       Output port node. This port should be connected to the input port of an
-      attached HDMI or LVDS encoder chip.
+      attached HDMI, LVDS or DisplayPort encoder chip.
 
 required:
   - compatible
@@ -70,8 +73,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/mt8173-clk.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/interrupt-controller/irq.h>
+
     dpi0: dpi@1401d000 {
         compatible = "mediatek,mt8173-dpi";
         reg = <0x1401d000 0x1000>;
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
new file mode 100644
index 000000000000..2cbdd9ee449d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: mediatek display DSC controller
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  The DSC standard is a specification of the algorithms used for
+  compressing and decompressing image display streams, including
+  the specification of the syntax and semantics of the compressed
+  video bit stream. DSC is designed for real-time systems with
+  real-time compression, transmission, decompression and Display.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8195-disp-dsc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: DSC Wrapper Clock
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  mediatek,gce-client-reg:
+    description:
+      The register of client driver can be configured by gce with 4 arguments
+      defined in this property, such as phandle of gce, subsys id,
+      register offset and size.
+      Each subsys id is mapping to a base address of display function blocks
+      register which is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsc0: disp_dsc_wrap@1c009000 {
+            compatible = "mediatek,mt8195-disp-dsc";
+            reg = <0 0x1c009000 0 0x1000>;
+            interrupts = <GIC_SPI 645 IRQ_TYPE_LEVEL_HIGH 0>;
+            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>;
+            clocks = <&vdosys0 CLK_VDO0_DSC_WRAP0>;
+            mediatek,gce-client-reg = <&gce1 SUBSYS_1c00XXXX 0x9000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
deleted file mode 100644
index d30428b9fb33..000000000000
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Mediatek DSI Device
-===================
-
-The Mediatek DSI function block is a sink of the display subsystem and can
-drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
-channel output.
-
-Required properties:
-- compatible: "mediatek,<chip>-dsi"
-- the supported chips are mt2701, mt7623, mt8167, mt8173 and mt8183.
-- reg: Physical base address and length of the controller's registers
-- interrupts: The interrupt signal from the function block.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: must contain "engine", "digital", and "hs"
-- phys: phandle link to the MIPI D-PHY controller.
-- phy-names: must contain "dphy"
-- port: Output port node with endpoint definitions as described in
-  Documentation/devicetree/bindings/graph.txt. This port should be connected
-  to the input port of an attached DSI panel or DSI-to-eDP encoder chip.
-
-MIPI TX Configuration Module
-============================
-
-See phy/mediatek,dsi-phy.yaml
-
-Example:
-
-mipi_tx0: mipi-dphy@10215000 {
-	compatible = "mediatek,mt8173-mipi-tx";
-	reg = <0 0x10215000 0 0x1000>;
-	clocks = <&clk26m>;
-	clock-output-names = "mipi_tx0_pll";
-	#clock-cells = <0>;
-	#phy-cells = <0>;
-	drive-strength-microamp = <4600>;
-	nvmem-cells= <&mipi_tx_calibration>;
-	nvmem-cell-names = "calibration-data";
-};
-
-dsi0: dsi@1401b000 {
-	compatible = "mediatek,mt8173-dsi";
-	reg = <0 0x1401b000 0 0x1000>;
-	interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>,
-		 <&mipi_tx0>;
-	clock-names = "engine", "digital", "hs";
-	phys = <&mipi_tx0>;
-	phy-names = "dphy";
-
-	port {
-		dsi0_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
new file mode 100644
index 000000000000..4707b60238b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DSI Controller
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Jitao Shi <jitao.shi@mediatek.com>
+  - Xinlei Lee <xinlei.lee@mediatek.com>
+
+description: |
+  The MediaTek DSI function block is a sink of the display subsystem and can
+  drive up to 4-lane MIPI DSI output. Two DSIs can be synchronized for dual-
+  channel output.
+
+allOf:
+  - $ref: /schemas/display/dsi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-dsi
+      - mediatek,mt7623-dsi
+      - mediatek,mt8167-dsi
+      - mediatek,mt8173-dsi
+      - mediatek,mt8183-dsi
+      - mediatek,mt8186-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Engine Clock
+      - description: Digital Clock
+      - description: HS Clock
+
+  clock-names:
+    items:
+      - const: engine
+      - const: digital
+      - const: hs
+
+  resets:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: dphy
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Output port node. This port should be connected to the input
+      port of an attached DSI panel or DSI-to-eDP encoder chip.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/phy/phy.h>
+    #include <dt-bindings/reset/mt8183-resets.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dsi0: dsi@14014000 {
+            compatible = "mediatek,mt8183-dsi";
+            reg = <0 0x14014000 0 0x1000>;
+            interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DSI0_MM>,
+                <&mmsys CLK_MM_DSI0_IF>,
+                <&mipi_tx0>;
+            clock-names = "engine", "digital", "hs";
+            resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
+            phys = <&mipi_tx0>;
+            phy-names = "dphy";
+            port {
+                dsi0_out: endpoint {
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
new file mode 100644
index 000000000000..801fa66ae615
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ethdr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Ethdr Device
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+  ETHDR (ET High Dynamic Range) is a MediaTek internal HDR engine and is
+  designed for HDR video and graphics conversion in the external display path.
+  It handles multiple HDR input types and performs tone mapping, color
+  space/color format conversion, and then combine different layers,
+  output the required HDR or SDR signal to the subsequent display path.
+  This engine is composed of two video frontends, two graphic frontends,
+  one video backend and a mixer. ETHDR has two DMA function blocks, DS and ADL.
+  These two function blocks read the pre-programmed registers from DRAM and
+  set them to HW in the v-blanking period.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-disp-ethdr
+
+  reg:
+    maxItems: 7
+
+  reg-names:
+    items:
+      - const: mixer
+      - const: vdo_fe0
+      - const: vdo_fe1
+      - const: gfx_fe0
+      - const: gfx_fe1
+      - const: vdo_be
+      - const: adl_ds
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    items:
+      - description: mixer clock
+      - description: video frontend 0 clock
+      - description: video frontend 1 clock
+      - description: graphic frontend 0 clock
+      - description: graphic frontend 1 clock
+      - description: video backend clock
+      - description: autodownload and menuload clock
+      - description: video frontend 0 async clock
+      - description: video frontend 1 async clock
+      - description: graphic frontend 0 async clock
+      - description: graphic frontend 1 async clock
+      - description: video backend async clock
+      - description: ethdr top clock
+
+  clock-names:
+    items:
+      - const: mixer
+      - const: vdo_fe0
+      - const: vdo_fe1
+      - const: gfx_fe0
+      - const: gfx_fe1
+      - const: vdo_be
+      - const: adl_ds
+      - const: vdo_fe0_async
+      - const: vdo_fe1_async
+      - const: gfx_fe0_async
+      - const: gfx_fe1_async
+      - const: vdo_be_async
+      - const: ethdr_top
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: video frontend 0 async reset
+      - description: video frontend 1 async reset
+      - description: graphic frontend 0 async reset
+      - description: graphic frontend 1 async reset
+      - description: video backend async reset
+
+  reset-names:
+    items:
+      - const: vdo_fe0_async
+      - const: vdo_fe1_async
+      - const: gfx_fe0_async
+      - const: gfx_fe1_async
+      - const: vdo_be_async
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 7
+    description: The register of display function block to be set by gce.
+      There are 4 arguments in this property, gce node, subsys id, offset and
+      register size. The subsys id is defined in the gce header of each chips
+      include/dt-bindings/gce/<chip>-gce.h, mapping to the register of display
+      function block.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - power-domains
+  - resets
+  - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+    #include <dt-bindings/memory/mt8195-memory-port.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    #include <dt-bindings/reset/mt8195-resets.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        hdr-engine@1c114000 {
+                compatible = "mediatek,mt8195-disp-ethdr";
+                reg = <0 0x1c114000 0 0x1000>,
+                      <0 0x1c115000 0 0x1000>,
+                      <0 0x1c117000 0 0x1000>,
+                      <0 0x1c119000 0 0x1000>,
+                      <0 0x1c11a000 0 0x1000>,
+                      <0 0x1c11b000 0 0x1000>,
+                      <0 0x1c11c000 0 0x1000>;
+                reg-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+                            "vdo_be", "adl_ds";
+                mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0x4000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0x5000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0x7000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0x9000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0xa000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0xb000 0x1000>,
+                                          <&gce0 SUBSYS_1c11XXXX 0xc000 0x1000>;
+                clocks = <&vdosys1 CLK_VDO1_DISP_MIXER>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_FE0>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_FE1>,
+                         <&vdosys1 CLK_VDO1_HDR_GFX_FE0>,
+                         <&vdosys1 CLK_VDO1_HDR_GFX_FE1>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_BE>,
+                         <&vdosys1 CLK_VDO1_26M_SLOW>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_FE0_DL_ASYNC>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_FE1_DL_ASYNC>,
+                         <&vdosys1 CLK_VDO1_HDR_GFX_FE0_DL_ASYNC>,
+                         <&vdosys1 CLK_VDO1_HDR_GFX_FE1_DL_ASYNC>,
+                         <&vdosys1 CLK_VDO1_HDR_VDO_BE_DL_ASYNC>,
+                         <&topckgen CLK_TOP_ETHDR>;
+                clock-names = "mixer", "vdo_fe0", "vdo_fe1", "gfx_fe0", "gfx_fe1",
+                              "vdo_be", "adl_ds", "vdo_fe0_async", "vdo_fe1_async",
+                              "gfx_fe0_async", "gfx_fe1_async","vdo_be_async",
+                              "ethdr_top";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+                iommus = <&iommu_vpp M4U_PORT_L3_HDR_DS>,
+                         <&iommu_vpp M4U_PORT_L3_HDR_ADL>;
+                interrupts = <GIC_SPI 517 IRQ_TYPE_LEVEL_HIGH 0>; /* disp mixer */
+                resets = <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE0_DL_ASYNC>,
+                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_FE1_DL_ASYNC>,
+                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE0_DL_ASYNC>,
+                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_GFX_FE1_DL_ASYNC>,
+                         <&vdosys1 MT8195_VDOSYS1_SW1_RST_B_HDR_VDO_BE_DL_ASYNC>;
+                reset-names = "vdo_fe0_async", "vdo_fe1_async", "gfx_fe0_async",
+                              "gfx_fe1_async", "vdo_be_async";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
new file mode 100644
index 000000000000..6c2be9d6840b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,gamma.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,gamma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display gamma correction
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display gamma correction, namely GAMMA, provides a nonlinear
+  operation used to adjust luminance in display system.
+  GAMMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-gamma
+          - mediatek,mt8183-disp-gamma
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-gamma
+              - mediatek,mt8188-disp-gamma
+              - mediatek,mt8192-disp-gamma
+              - mediatek,mt8195-disp-gamma
+          - const: mediatek,mt8183-disp-gamma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: GAMMA Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gamma@14016000 {
+            compatible = "mediatek,mt8173-disp-gamma";
+            reg = <0 0x14016000 0 0x1000>;
+            interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_GAMMA>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x6000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml
index b6fcdfb99ab2..bd8f7b8ae0ff 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi-ddc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi-ddc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek HDMI DDC Device Tree Bindings
+title: Mediatek HDMI DDC
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
index 111967efa999..b90b6d18a828 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/mediatek/mediatek,hdmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek HDMI Encoder Device Tree Bindings
+title: Mediatek HDMI Encoder
 
 maintainers:
   - CK Hu <ck.hu@mediatek.com>
@@ -50,8 +50,11 @@ properties:
       - const: hdmi
 
   mediatek,syscon-hdmi:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to system configuration registers
+          - description: register offset in the system configuration registers
     description: |
       phandle link and register offset to the system configuration registers.
 
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
new file mode 100644
index 000000000000..dd12e2ff685c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MDP RDMA
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+  The MediaTek MDP RDMA stands for Read Direct Memory Access.
+  It provides real time data to the back-end panel driver, such as DSI,
+  DPI and DP_INTF.
+  It contains one line buffer to store the sufficient pixel data.
+  RDMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-vdo1-rdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RDMA Clock
+
+  iommus:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description:
+      The register of display function block to be set by gce. There are 4 arguments,
+      such as gce node, subsys id, offset and register size. The subsys id that is
+      mapping to the register of display function blocks is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - iommus
+  - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+    #include <dt-bindings/memory/mt8195-memory-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rdma@1c104000 {
+            compatible = "mediatek,mt8195-vdo1-rdma";
+            reg = <0 0x1c104000 0 0x1000>;
+            interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>;
+            clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>;
+            power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
+            iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>;
+            mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
new file mode 100644
index 000000000000..2f8e2f4dc3b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,merge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display merge
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display merge, namely MERGE, is used to merge two slice-per-line
+  inputs into one side-by-side output.
+  MERGE device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-merge
+          - mediatek,mt8195-disp-merge
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: merge
+      - items:
+          - const: merge
+          - const: merge_async
+
+  mediatek,merge-fifo-en:
+    description:
+      The setting of merge fifo is mainly provided for the display latency
+      buffer to ensure that the back-end panel display data will not be
+      underrun, a little more data is needed in the fifo.
+      According to the merge fifo settings, when the water level is detected
+      to be insufficient, it will trigger RDMA sending ultra and preulra
+      command to SMI to speed up the data rate.
+    type: boolean
+
+  mediatek,merge-mute:
+    description: Support mute function. Mute the content of merge output.
+    type: boolean
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  resets:
+    description: reset controller
+      See Documentation/devicetree/bindings/reset/reset.txt for details.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        merge@14017000 {
+            compatible = "mediatek,mt8173-disp-merge";
+            reg = <0 0x14017000 0 0x1000>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_MERGE>;
+            clock-names = "merge";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
new file mode 100644
index 000000000000..29f9fa8f8219
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,od.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,od.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overdirve
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display overdrive, namely OD, increases the transition values
+  of pixels between consecutive frames to make LCD rotate faster.
+  OD device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2712-disp-od
+          - mediatek,mt8173-disp-od
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: OD Clock
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        od@14023000 {
+            compatible = "mediatek,mt8173-disp-od";
+            reg = <0 0x14023000 0 0x1000>;
+            clocks = <&mmsys CLK_MM_DISP_OD>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
new file mode 100644
index 000000000000..c7dd0ef02dcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl-2l.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl-2l.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overlay 2 layer
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display overlay 2 layer, namely OVL-2L, provides 2 more layer
+  for OVL.
+  OVL-2L device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8183-disp-ovl-2l
+          - mediatek,mt8192-disp-ovl-2l
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-ovl-2l
+          - const: mediatek,mt8192-disp-ovl-2l
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: OVL-2L Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ovl_2l0: ovl@14009000 {
+            compatible = "mediatek,mt8183-disp-ovl-2l";
+            reg = <0 0x14009000 0 0x1000>;
+            interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+            iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
new file mode 100644
index 000000000000..92e320d54ba2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ovl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display overlay
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display overlay, namely OVL, can do alpha blending from
+  the memory.
+  OVL device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-disp-ovl
+          - mediatek,mt8173-disp-ovl
+          - mediatek,mt8183-disp-ovl
+          - mediatek,mt8192-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt7623-disp-ovl
+              - mediatek,mt2712-disp-ovl
+          - const: mediatek,mt2701-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt8188-disp-ovl
+              - mediatek,mt8195-disp-ovl
+          - const: mediatek,mt8183-disp-ovl
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-ovl
+          - const: mediatek,mt8192-disp-ovl
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: OVL Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ovl0: ovl@1400c000 {
+            compatible = "mediatek,mt8173-disp-ovl";
+            reg = <0 0x1400c000 0 0x1000>;
+            interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_OVL0>;
+            iommus = <&iommu M4U_PORT_DISP_OVL0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
new file mode 100644
index 000000000000..11fe32e50a59
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,postmask.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,postmask.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display postmask
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display postmask, namely POSTMASK, provides round corner pattern
+  generation.
+  POSTMASK device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8192-disp-postmask
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-postmask
+              - mediatek,mt8188-disp-postmask
+          - const: mediatek,mt8192-disp-postmask
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: POSTMASK Clock
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8192-clk.h>
+    #include <dt-bindings/power/mt8192-power.h>
+    #include <dt-bindings/gce/mt8192-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        postmask0: postmask@1400d000 {
+            compatible = "mediatek,mt8192-disp-postmask";
+            reg = <0 0x1400d000 0 0x1000>;
+            interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>;
+            power-domains = <&scpsys MT8192_POWER_DOMAIN_DISP>;
+            clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
new file mode 100644
index 000000000000..42059efad45d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,rdma.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Read Direct Memory Access
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek Read Direct Memory Access(RDMA) component used to read the
+  data into DMA. It provides real time data to the back-end panel
+  driver, such as DSI, DPI and DP_INTF.
+  It contains one line buffer to store the sufficient pixel data.
+  RDMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt2701-disp-rdma
+          - mediatek,mt8173-disp-rdma
+          - mediatek,mt8183-disp-rdma
+          - mediatek,mt8195-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt8188-disp-rdma
+          - const: mediatek,mt8195-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt7623-disp-rdma
+              - mediatek,mt2712-disp-rdma
+          - const: mediatek,mt2701-disp-rdma
+      - items:
+          - enum:
+              - mediatek,mt8186-disp-rdma
+              - mediatek,mt8192-disp-rdma
+          - const: mediatek,mt8183-disp-rdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: RDMA Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,rdma-fifo-size:
+    description:
+      rdma fifo size may be different even in same SOC, add this property to the
+      corresponding rdma.
+      The value below is the Max value which defined in hardware data sheet
+      mediatek,rdma-fifo-size of mt8173-rdma0 is 8K
+      mediatek,rdma-fifo-size of mt8183-rdma0 is 5K
+      mediatek,rdma-fifo-size of mt8183-rdma1 is 2K
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8192, 5120, 2048]
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        rdma0: rdma@1400e000 {
+            compatible = "mediatek,mt8173-disp-rdma";
+            reg = <0 0x1400e000 0 0x1000>;
+            interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+            iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+            mediatek,rdma-fifo-size = <8192>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
new file mode 100644
index 000000000000..21a4e96ecd93
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,split.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display split
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display split, namely SPLIT, is used to split stream to two
+  encoders.
+  SPLIT device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-split
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: SPLIT Clock
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        split0: split@14018000 {
+            compatible = "mediatek,mt8173-disp-split";
+            reg = <0 0x14018000 0 0x1000>;
+            power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_SPLIT0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
new file mode 100644
index 000000000000..62fad23a26f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ufoe.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,ufoe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek display UFOe
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek display UFOe stands for Unified Frame Optimization engine.
+  UFOe can cut the data rate for DSI port which may lead to reduce power
+  consumption.
+  UFOe device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-ufoe
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: UFOe Clock
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ufoe@1401a000 {
+            compatible = "mediatek,mt8173-disp-ufoe";
+            reg = <0 0x1401a000 0 0x1000>;
+            interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_UFOE>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
new file mode 100644
index 000000000000..991183165d29
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,wdma.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,wdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Write Direct Memory Access
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description: |
+  Mediatek Write Direct Memory Access(WDMA) component used to write
+  the data into DMA.
+  WDMA device node must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt8173-disp-wdma
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    description: A phandle and PM domain specifier as defined by bindings of
+      the power controller specified by phandle. See
+      Documentation/devicetree/bindings/power/power-domain.yaml for details.
+
+  clocks:
+    items:
+      - description: WDMA Clock
+
+  iommus:
+    description:
+      This property should point to the respective IOMMU block with master port as argument,
+      see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/power/mt8173-power.h>
+    #include <dt-bindings/gce/mt8173-gce.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        wdma0: wdma@14011000 {
+            compatible = "mediatek,mt8173-disp-wdma";
+            reg = <0 0x14011000 0 0x1000>;
+            interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_LOW>;
+            power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+            clocks = <&mmsys CLK_MM_DISP_WDMA0>;
+            iommus = <&iommu M4U_PORT_DISP_WDMA0>;
+            mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index 64d8d9e5e47a..f0c2237d5f82 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: MSM Display Port Controller
 
 maintainers:
-  - Kuogee Hsieh <khsieh@codeaurora.org>
+  - Kuogee Hsieh <quic_khsieh@quicinc.com>
 
 description: |
   Device tree bindings for DisplayPort host controller for MSM targets
@@ -15,11 +15,30 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7180-dp
+    oneOf:
+      - enum:
+          - qcom,sc7180-dp
+          - qcom,sc7280-dp
+          - qcom,sc7280-edp
+          - qcom,sc8180x-dp
+          - qcom,sc8180x-edp
+          - qcom,sc8280xp-dp
+          - qcom,sc8280xp-edp
+          - qcom,sdm845-dp
+          - qcom,sm8350-dp
+      - items:
+          - enum:
+              - qcom,sm8450-dp
+          - const: qcom,sm8350-dp
 
   reg:
-    maxItems: 1
+    minItems: 4
+    items:
+      - description: ahb register block
+      - description: aux register block
+      - description: link register block
+      - description: p0 register block
+      - description: p1 register block
 
   interrupts:
     maxItems: 1
@@ -57,15 +76,32 @@ properties:
     items:
       - const: dp
 
-  operating-points-v2:
-    maxItems: 1
+  operating-points-v2: true
+
+  opp-table: true
 
   power-domains:
     maxItems: 1
 
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  data-lanes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    deprecated: true
+    minItems: 1
+    maxItems: 4
+    items:
+      maximum: 3
+
   "#sound-dai-cells":
     const: 0
 
+  vdda-0p9-supply:
+    deprecated: true
+  vdda-1p2-supply:
+    deprecated: true
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
     properties:
@@ -74,8 +110,28 @@ properties:
         description: Input endpoint of the controller
 
       port@1:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
         description: Output endpoint of the controller
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum: [ 0, 1, 2, 3 ]
+
+              link-frequencies:
+                minItems: 1
+                maxItems: 4
+                items:
+                  enum: [ 1620000000, 2700000000, 5400000000, 8100000000 ]
+
+    required:
+      - port@0
+      - port@1
 
 required:
   - compatible
@@ -85,22 +141,47 @@ required:
   - clock-names
   - phys
   - phy-names
-  - "#sound-dai-cells"
   - power-domains
   - ports
 
+allOf:
+  # AUX BUS does not exist on DP controllers
+  # Audio output also is present only on DP output
+  # p1 regions is present on DP, but not on eDP
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-edp
+              - qcom,sc8180x-edp
+              - qcom,sc8280xp-edp
+    then:
+      properties:
+        "#sound-dai-cells": false
+    else:
+      properties:
+        aux-bus: false
+        reg:
+          minItems: 5
+      required:
+        - "#sound-dai-cells"
+
 additionalProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
-    #include <dt-bindings/power/qcom-aoss-qmp.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
 
     displayport-controller@ae90000 {
         compatible = "qcom,sc7180-dp";
-        reg = <0xae90000 0x1400>;
+        reg = <0xae90000 0x200>,
+              <0xae90200 0x200>,
+              <0xae90400 0xc00>,
+              <0xae91000 0x400>,
+              <0xae91400 0x400>;
         interrupt-parent = <&mdss>;
         interrupts = <12>;
         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -139,6 +220,8 @@ examples:
                 reg = <1>;
                 endpoint {
                     remote-endpoint = <&typec>;
+                    data-lanes = <0 1>;
+                    link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
                 };
             };
         };
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
new file mode 100644
index 000000000000..3f953aa5e694
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml
@@ -0,0 +1,56 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU common properties
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Rob Clark <robdclark@gmail.com>
+
+description: |
+  Common properties for QCom DPU display controller.
+
+# Do not select this by default, otherwise it is also selected for all
+# display-controller@ nodes
+select:
+  false
+
+properties:
+  $nodename:
+    pattern: '^display-controller@[0-9a-f]+$'
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Contains the list of output ports from DPU device. These ports
+      connect to interfaces that are external to the DPU hardware,
+      such as DSI, DP etc.
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        $ref: /schemas/graph.yaml#/properties/port
+
+    # at least one port is required
+    required:
+      - port@0
+
+required:
+  - interrupts
+  - power-domains
+  - operating-points-v2
+  - ports
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
deleted file mode 100644
index 12a86b1ec1bc..000000000000
--- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml
+++ /dev/null
@@ -1,228 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/dpu-sc7180.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display DPU dt properties for SC7180 target
-
-maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
-
-description: |
-  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
-  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
-  bindings of MDSS and DPU are mentioned for SC7180 target.
-
-properties:
-  compatible:
-    items:
-      - const: qcom,sc7180-mdss
-
-  reg:
-    maxItems: 1
-
-  reg-names:
-    const: mdss
-
-  power-domains:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: Display AHB clock from gcc
-      - description: Display AHB clock from dispcc
-      - description: Display core clock
-
-  clock-names:
-    items:
-      - const: iface
-      - const: ahb
-      - const: core
-
-  interrupts:
-    maxItems: 1
-
-  interrupt-controller: true
-
-  "#address-cells": true
-
-  "#size-cells": true
-
-  "#interrupt-cells":
-    const: 1
-
-  iommus:
-    items:
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-
-  ranges: true
-
-  interconnects:
-    items:
-      - description: Interconnect path specifying the port ids for data bus
-
-  interconnect-names:
-    const: mdp0-mem
-
-patternProperties:
-  "^display-controller@[0-9a-f]+$":
-    type: object
-    description: Node containing the properties of DPU.
-
-    properties:
-      compatible:
-        items:
-          - const: qcom,sc7180-dpu
-
-      reg:
-        items:
-          - description: Address offset and size for mdp register set
-          - description: Address offset and size for vbif register set
-
-      reg-names:
-        items:
-          - const: mdp
-          - const: vbif
-
-      clocks:
-        items:
-          - description: Display hf axi clock
-          - description: Display ahb clock
-          - description: Display rotator clock
-          - description: Display lut clock
-          - description: Display core clock
-          - description: Display vsync clock
-
-      clock-names:
-        items:
-          - const: bus
-          - const: iface
-          - const: rot
-          - const: lut
-          - const: core
-          - const: vsync
-
-      interrupts:
-        maxItems: 1
-
-      power-domains:
-        maxItems: 1
-
-      operating-points-v2: true
-
-      ports:
-        $ref: /schemas/graph.yaml#/properties/ports
-        description: |
-          Contains the list of output ports from DPU device. These ports
-          connect to interfaces that are external to the DPU hardware,
-          such as DSI, DP etc. Each output port contains an endpoint that
-          describes how it is connected to an external interface.
-
-        properties:
-          port@0:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF1 (DSI1)
-
-          port@2:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF0 (DP)
-
-        required:
-          - port@0
-
-    required:
-      - compatible
-      - reg
-      - reg-names
-      - clocks
-      - interrupts
-      - power-domains
-      - operating-points-v2
-      - ports
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - power-domains
-  - clocks
-  - interrupts
-  - interrupt-controller
-  - iommus
-  - ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
-    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/interconnect/qcom,sdm845.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
-
-    display-subsystem@ae00000 {
-         #address-cells = <1>;
-         #size-cells = <1>;
-         compatible = "qcom,sc7180-mdss";
-         reg = <0xae00000 0x1000>;
-         reg-names = "mdss";
-         power-domains = <&dispcc MDSS_GDSC>;
-         clocks = <&gcc GCC_DISP_AHB_CLK>,
-                  <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                  <&dispcc DISP_CC_MDSS_MDP_CLK>;
-         clock-names = "iface", "ahb", "core";
-
-         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-         interrupt-controller;
-         #interrupt-cells = <1>;
-
-         interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
-         interconnect-names = "mdp0-mem";
-
-         iommus = <&apps_smmu 0x800 0x2>;
-         ranges;
-
-         display-controller@ae01000 {
-                   compatible = "qcom,sc7180-dpu";
-                   reg = <0x0ae01000 0x8f000>,
-                         <0x0aeb0000 0x2008>;
-
-                   reg-names = "mdp", "vbif";
-
-                   clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
-                            <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                            <&dispcc DISP_CC_MDSS_ROT_CLK>,
-                            <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
-                            <&dispcc DISP_CC_MDSS_MDP_CLK>,
-                            <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-                   clock-names = "bus", "iface", "rot", "lut", "core",
-                                 "vsync";
-
-                   interrupt-parent = <&mdss>;
-                   interrupts = <0>;
-                   power-domains = <&rpmhpd SC7180_CX>;
-                   operating-points-v2 = <&mdp_opp_table>;
-
-                   ports {
-                           #address-cells = <1>;
-                           #size-cells = <0>;
-
-                           port@0 {
-                                   reg = <0>;
-                                   dpu_intf1_out: endpoint {
-                                                  remote-endpoint = <&dsi0_in>;
-                                   };
-                           };
-
-                            port@2 {
-                                    reg = <2>;
-                                    dpu_intf0_out: endpoint {
-                                                   remote-endpoint = <&dp_in>;
-                                    };
-                            };
-                   };
-         };
-    };
-...
diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
deleted file mode 100644
index b4ea7c92fb3d..000000000000
--- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml
+++ /dev/null
@@ -1,212 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Display DPU dt properties for SDM845 target
-
-maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
-
-description: |
-  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
-  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
-  bindings of MDSS and DPU are mentioned for SDM845 target.
-
-properties:
-  compatible:
-    items:
-      - const: qcom,sdm845-mdss
-
-  reg:
-    maxItems: 1
-
-  reg-names:
-    const: mdss
-
-  power-domains:
-    maxItems: 1
-
-  clocks:
-    items:
-      - description: Display AHB clock from gcc
-      - description: Display AXI clock
-      - description: Display core clock
-
-  clock-names:
-    items:
-      - const: iface
-      - const: bus
-      - const: core
-
-  interrupts:
-    maxItems: 1
-
-  interrupt-controller: true
-
-  "#address-cells": true
-
-  "#size-cells": true
-
-  "#interrupt-cells":
-    const: 1
-
-  iommus:
-    items:
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
-      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
-
-  ranges: true
-
-patternProperties:
-  "^display-controller@[0-9a-f]+$":
-    type: object
-    description: Node containing the properties of DPU.
-
-    properties:
-      compatible:
-        items:
-          - const: qcom,sdm845-dpu
-
-      reg:
-        items:
-          - description: Address offset and size for mdp register set
-          - description: Address offset and size for vbif register set
-
-      reg-names:
-        items:
-          - const: mdp
-          - const: vbif
-
-      clocks:
-        items:
-          - description: Display ahb clock
-          - description: Display axi clock
-          - description: Display core clock
-          - description: Display vsync clock
-
-      clock-names:
-        items:
-          - const: iface
-          - const: bus
-          - const: core
-          - const: vsync
-
-      interrupts:
-        maxItems: 1
-
-      power-domains:
-        maxItems: 1
-
-      operating-points-v2: true
-      ports:
-        $ref: /schemas/graph.yaml#/properties/ports
-        description: |
-          Contains the list of output ports from DPU device. These ports
-          connect to interfaces that are external to the DPU hardware,
-          such as DSI, DP etc. Each output port contains an endpoint that
-          describes how it is connected to an external interface.
-
-        properties:
-          port@0:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF1 (DSI1)
-
-          port@1:
-            $ref: /schemas/graph.yaml#/properties/port
-            description: DPU_INTF2 (DSI2)
-
-        required:
-          - port@0
-          - port@1
-
-    required:
-      - compatible
-      - reg
-      - reg-names
-      - clocks
-      - interrupts
-      - power-domains
-      - operating-points-v2
-      - ports
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - power-domains
-  - clocks
-  - interrupts
-  - interrupt-controller
-  - iommus
-  - ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
-    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/power/qcom-rpmpd.h>
-
-    display-subsystem@ae00000 {
-          #address-cells = <1>;
-          #size-cells = <1>;
-          compatible = "qcom,sdm845-mdss";
-          reg = <0x0ae00000 0x1000>;
-          reg-names = "mdss";
-          power-domains = <&dispcc MDSS_GDSC>;
-
-          clocks = <&gcc GCC_DISP_AHB_CLK>,
-                   <&gcc GCC_DISP_AXI_CLK>,
-                   <&dispcc DISP_CC_MDSS_MDP_CLK>;
-          clock-names = "iface", "bus", "core";
-
-          interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-          interrupt-controller;
-          #interrupt-cells = <1>;
-
-          iommus = <&apps_smmu 0x880 0x8>,
-                   <&apps_smmu 0xc80 0x8>;
-          ranges;
-
-          display-controller@ae01000 {
-                    compatible = "qcom,sdm845-dpu";
-                    reg = <0x0ae01000 0x8f000>,
-                          <0x0aeb0000 0x2008>;
-                    reg-names = "mdp", "vbif";
-
-                    clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
-                             <&dispcc DISP_CC_MDSS_AXI_CLK>,
-                             <&dispcc DISP_CC_MDSS_MDP_CLK>,
-                             <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-                    clock-names = "iface", "bus", "core", "vsync";
-
-                    interrupt-parent = <&mdss>;
-                    interrupts = <0>;
-                    power-domains = <&rpmhpd SDM845_CX>;
-                    operating-points-v2 = <&mdp_opp_table>;
-
-                    ports {
-                           #address-cells = <1>;
-                           #size-cells = <0>;
-
-                           port@0 {
-                                   reg = <0>;
-                                   dpu_intf1_out: endpoint {
-                                                  remote-endpoint = <&dsi0_in>;
-                                   };
-                           };
-
-                           port@1 {
-                                   reg = <1>;
-                                   dpu_intf2_out: endpoint {
-                                                  remote-endpoint = <&dsi1_in>;
-                                   };
-                           };
-                    };
-          };
-    };
-...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index 35426fde8610..e6c1ebfe8a32 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -7,15 +7,35 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI controller
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
-
-allOf:
-  - $ref: "../dsi-controller.yaml#"
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 properties:
   compatible:
-    items:
-      - const: qcom,mdss-dsi-ctrl
+    oneOf:
+      - items:
+          - enum:
+              - qcom,apq8064-dsi-ctrl
+              - qcom,msm8916-dsi-ctrl
+              - qcom,msm8953-dsi-ctrl
+              - qcom,msm8974-dsi-ctrl
+              - qcom,msm8996-dsi-ctrl
+              - qcom,msm8998-dsi-ctrl
+              - qcom,qcm2290-dsi-ctrl
+              - qcom,sc7180-dsi-ctrl
+              - qcom,sc7280-dsi-ctrl
+              - qcom,sdm660-dsi-ctrl
+              - qcom,sdm845-dsi-ctrl
+              - qcom,sm6115-dsi-ctrl
+              - qcom,sm8150-dsi-ctrl
+              - qcom,sm8250-dsi-ctrl
+              - qcom,sm8350-dsi-ctrl
+              - qcom,sm8450-dsi-ctrl
+              - qcom,sm8550-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+      - enum:
+          - qcom,dsi-ctrl-6g-qcm2290
+          - qcom,mdss-dsi-ctrl # This should always come with an SoC-specific compatible
+        deprecated: true
 
   reg:
     maxItems: 1
@@ -27,36 +47,34 @@ properties:
     maxItems: 1
 
   clocks:
-    items:
-      - description: Display byte clock
-      - description: Display byte interface clock
-      - description: Display pixel clock
-      - description: Display escape clock
-      - description: Display AHB clock
-      - description: Display AXI clock
+    description: |
+      Several clocks are used, depending on the variant. Typical ones are::
+       - bus:: Display AHB clock.
+       - byte:: Display byte clock.
+       - byte_intf:: Display byte interface clock.
+       - core:: Display core clock.
+       - core_mss:: Core MultiMedia SubSystem clock.
+       - iface:: Display AXI clock.
+       - mdp_core:: MDP Core clock.
+       - mnoc:: MNOC clock
+       - pixel:: Display pixel clock.
+    minItems: 3
+    maxItems: 9
 
   clock-names:
-    items:
-      - const: byte
-      - const: byte_intf
-      - const: pixel
-      - const: core
-      - const: iface
-      - const: bus
+    minItems: 3
+    maxItems: 9
 
   phys:
     maxItems: 1
 
   phy-names:
+    deprecated: true
     const: dsi
 
-  "#address-cells": true
-
-  "#size-cells": true
-
   syscon-sfpb:
     description: A phandle to mmss_sfpb syscon node (only for DSIv2).
-    $ref: "/schemas/types.yaml#/definitions/phandle"
+    $ref: /schemas/types.yaml#/definitions/phandle
 
   qcom,dual-dsi-mode:
     type: boolean
@@ -66,13 +84,15 @@ properties:
 
   assigned-clocks:
     minItems: 2
-    maxItems: 2
+    maxItems: 4
     description: |
       Parents of "byte" and "pixel" for the given platform.
+      For DSIv2 platforms this should contain "byte", "esc", "src" and
+      "pixel_src" clocks.
 
   assigned-clock-parents:
     minItems: 2
-    maxItems: 2
+    maxItems: 4
     description: |
       The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block.
 
@@ -81,15 +101,18 @@ properties:
 
   operating-points-v2: true
 
+  opp-table:
+    type: object
+
   ports:
-    $ref: "/schemas/graph.yaml#/properties/ports"
+    $ref: /schemas/graph.yaml#/properties/ports
     description: |
       Contains DSI controller input and output ports as children, each
       containing one endpoint subnode.
 
     properties:
       port@0:
-        $ref: "/schemas/graph.yaml#/$defs/port-base"
+        $ref: /schemas/graph.yaml#/$defs/port-base
         unevaluatedProperties: false
         description: |
           Input endpoints of the controller.
@@ -100,12 +123,12 @@ properties:
             properties:
               data-lanes:
                 maxItems: 4
-                minItems: 4
+                minItems: 1
                 items:
                   enum: [ 0, 1, 2, 3 ]
 
       port@1:
-        $ref: "/schemas/graph.yaml#/$defs/port-base"
+        $ref: /schemas/graph.yaml#/$defs/port-base
         unevaluatedProperties: false
         description: |
           Output endpoints of the controller.
@@ -116,7 +139,7 @@ properties:
             properties:
               data-lanes:
                 maxItems: 4
-                minItems: 4
+                minItems: 1
                 items:
                   enum: [ 0, 1, 2, 3 ]
 
@@ -124,6 +147,26 @@ properties:
       - port@0
       - port@1
 
+  avdd-supply:
+    description:
+      Phandle to vdd regulator device node
+
+  vcca-supply:
+    description:
+      Phandle to vdd regulator device node
+
+  vdd-supply:
+    description:
+      VDD regulator
+
+  vddio-supply:
+    description:
+      VDD-IO regulator
+
+  vdda-supply:
+    description:
+      VDDA regulator
+
 required:
   - compatible
   - reg
@@ -132,14 +175,197 @@ required:
   - clocks
   - clock-names
   - phys
-  - phy-names
   - assigned-clocks
   - assigned-clock-parents
-  - power-domains
-  - operating-points-v2
   - ports
 
-additionalProperties: false
+allOf:
+  - $ref: ../dsi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,apq8064-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 7
+        clock-names:
+          items:
+            - const: iface
+            - const: bus
+            - const: core_mmss
+            - const: src
+            - const: byte
+            - const: pixel
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8916-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 6
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: bus
+            - const: byte
+            - const: pixel
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8953-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 6
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: bus
+            - const: byte
+            - const: pixel
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8974-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 7
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: bus
+            - const: byte
+            - const: pixel
+            - const: core
+            - const: core_mmss
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 7
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: byte
+            - const: iface
+            - const: bus
+            - const: core_mmss
+            - const: pixel
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 6
+        clock-names:
+          items:
+            - const: byte
+            - const: byte_intf
+            - const: pixel
+            - const: core
+            - const: iface
+            - const: bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-dsi-ctrl
+              - qcom,sc7280-dsi-ctrl
+              - qcom,sm8150-dsi-ctrl
+              - qcom,sm8250-dsi-ctrl
+              - qcom,sm8350-dsi-ctrl
+              - qcom,sm8450-dsi-ctrl
+              - qcom,sm8550-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 6
+        clock-names:
+          items:
+            - const: byte
+            - const: byte_intf
+            - const: pixel
+            - const: core
+            - const: iface
+            - const: bus
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm660-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 9
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: byte
+            - const: byte_intf
+            - const: mnoc
+            - const: iface
+            - const: bus
+            - const: core_mmss
+            - const: pixel
+            - const: core
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-dsi-ctrl
+              - qcom,sm6115-dsi-ctrl
+    then:
+      properties:
+        clocks:
+          maxItems: 6
+        clock-names:
+          items:
+            - const: byte
+            - const: byte_intf
+            - const: pixel
+            - const: core
+            - const: iface
+            - const: bus
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -149,7 +375,7 @@ examples:
      #include <dt-bindings/power/qcom-rpmpd.h>
 
      dsi@ae94000 {
-           compatible = "qcom,mdss-dsi-ctrl";
+           compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl";
            reg = <0x0ae94000 0x400>;
            reg-names = "dsi_ctrl";
 
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
index 4399715953e1..e6b00d7387ce 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 10nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
@@ -35,11 +35,40 @@ properties:
       Connected to DSI0_MIPI_DSI_PLL_VDDA0P9 pin for sc7180 target and
       connected to VDDA_MIPI_DSI_0_PLL_0P9 pin for sdm845 target
 
+  qcom,phy-rescode-offset-top:
+    $ref: /schemas/types.yaml#/definitions/int8-array
+    maxItems: 5
+    description:
+      Integer array of offset for pull-up legs rescode for all five lanes.
+      To offset the drive strength from the calibrated value in an increasing
+      manner, -32 is the weakest and +31 is the strongest.
+    items:
+      minimum: -32
+      maximum: 31
+
+  qcom,phy-rescode-offset-bot:
+    $ref: /schemas/types.yaml#/definitions/int8-array
+    maxItems: 5
+    description:
+      Integer array of offset for pull-down legs rescode for all five lanes.
+      To offset the drive strength from the calibrated value in a decreasing
+      manner, -32 is the weakest and +31 is the strongest.
+    items:
+      minimum: -32
+      maximum: 31
+
+  qcom,phy-drive-ldo-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The PHY LDO has an amplitude tuning feature to adjust the LDO output
+      for the HSTX drive. Use supported levels (mV) to offset the drive level
+      from the default value.
+    enum: [ 375, 400, 425, 450, 475, 500 ]
+
 required:
   - compatible
   - reg
   - reg-names
-  - vdds-supply
 
 unevaluatedProperties: false
 
@@ -64,5 +93,9 @@ examples:
          clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
                   <&rpmhcc RPMH_CXO_CLK>;
          clock-names = "iface", "ref";
+
+         qcom,phy-rescode-offset-top = /bits/ 8 <0 0 0 0 0>;
+         qcom,phy-rescode-offset-bot = /bits/ 8 <0 0 0 0 0>;
+         qcom,phy-drive-ldo-level = <400>;
      };
 ...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
index 064df50e21a5..a43e11d3b00d 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 14nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
@@ -16,7 +16,9 @@ properties:
   compatible:
     enum:
       - qcom,dsi-phy-14nm
+      - qcom,dsi-phy-14nm-2290
       - qcom,dsi-phy-14nm-660
+      - qcom,dsi-phy-14nm-8953
 
   reg:
     items:
@@ -37,7 +39,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - vcca-supply
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
index b8de785ce815..9c1f9140c731 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 20nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
index 69eecaa64b18..cf4a338c4661 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Display DSI 28nm PHY
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
 allOf:
   - $ref: dsi-phy-common.yaml#
@@ -16,6 +16,7 @@ properties:
   compatible:
     enum:
       - qcom,dsi-phy-28nm-hpm
+      - qcom,dsi-phy-28nm-hpm-fam-b
       - qcom,dsi-phy-28nm-lp
       - qcom,dsi-phy-28nm-8960
 
@@ -34,6 +35,10 @@ properties:
   vddio-supply:
     description: Phandle to vdd-io regulator device node.
 
+  qcom,dsi-phy-regulator-ldo-mode:
+    type: boolean
+    description: Indicates if the LDO mode PHY regulator is wanted.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
index c851770bbdf2..8e9031bbde73 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
@@ -18,6 +18,10 @@ properties:
       - qcom,dsi-phy-7nm
       - qcom,dsi-phy-7nm-8150
       - qcom,sc7280-dsi-phy-7nm
+      - qcom,sm6375-dsi-phy-7nm
+      - qcom,sm8350-dsi-phy-5nm
+      - qcom,sm8450-dsi-phy-5nm
+      - qcom,sm8550-dsi-phy-4nm
 
   reg:
     items:
@@ -44,7 +48,6 @@ required:
   - compatible
   - reg
   - reg-names
-  - vdds-supply
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
index 502bdda90235..0f6f08890e7e 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
@@ -4,14 +4,13 @@
 $id: http://devicetree.org/schemas/display/msm/dsi-phy-common.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Description of Qualcomm Display DSI PHY common dt properties
+title: Qualcomm Display DSI PHY Common Properties
 
 maintainers:
-  - Krishna Manikandan <mkrishn@codeaurora.org>
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
 
-description: |
-  This defines the DSI PHY dt properties which are common for all
-  dsi phy versions.
+description:
+  Common properties for Qualcomm Display DSI PHY.
 
 properties:
   "#clock-cells":
diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt
deleted file mode 100644
index eff9daff418c..000000000000
--- a/Documentation/devicetree/bindings/display/msm/edp.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Qualcomm Technologies Inc. adreno/snapdragon eDP output
-
-Required properties:
-- compatible:
-  * "qcom,mdss-edp"
-- reg: Physical base address and length of the registers of controller and PLL
-- reg-names: The names of register regions. The following regions are required:
-  * "edp"
-  * "pll_base"
-- interrupts: The interrupt signal from the eDP block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: the following clocks are required:
-  * "core"
-  * "iface"
-  * "mdp_core"
-  * "pixel"
-  * "link"
-- #clock-cells: The value should be 1.
-- vdda-supply: phandle to vdda regulator device node
-- lvl-vdd-supply: phandle to regulator device node which is used to supply power
-  to HPD receiving chip
-- panel-en-gpios: GPIO pin to supply power to panel.
-- panel-hpd-gpios: GPIO pin used for eDP hpd.
-
-
-Example:
-	mdss_edp: qcom,mdss_edp@fd923400 {
-			compatible = "qcom,mdss-edp";
-			reg-names =
-				"edp",
-				"pll_base";
-			reg =	<0xfd923400 0x700>,
-				<0xfd923a00 0xd4>;
-			interrupt-parent = <&mdss_mdp>;
-			interrupts = <12 0>;
-			power-domains = <&mmcc MDSS_GDSC>;
-			clock-names =
-				"core",
-				"pixel",
-				"iface",
-				"link",
-				"mdp_core";
-			clocks =
-				<&mmcc MDSS_EDPAUX_CLK>,
-				<&mmcc MDSS_EDPPIXEL_CLK>,
-				<&mmcc MDSS_AHB_CLK>,
-				<&mmcc MDSS_EDPLINK_CLK>,
-				<&mmcc MDSS_MDP_CLK>;
-			#clock-cells = <1>;
-			vdda-supply = <&pma8084_l12>;
-			lvl-vdd-supply = <&lvl_vreg>;
-			panel-en-gpios = <&tlmm 137 0>;
-			panel-hpd-gpios = <&tlmm 103 0>;
-	};
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
index fe55611d2603..029d72822d8b 100644
--- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
@@ -3,10 +3,10 @@
 %YAML 1.2
 ---
 
-$id: "http://devicetree.org/schemas/display/msm/gmu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/msm/gmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Devicetree bindings for the GMU attached to certain Adreno GPUs
+title: GMU attached to certain Adreno GPUs
 
 maintainers:
   - Rob Clark <robdclark@gmail.com>
@@ -20,35 +20,24 @@ description: |
 properties:
   compatible:
     items:
-      - enum:
-          - qcom,adreno-gmu-630.2
+      - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$'
       - const: qcom,adreno-gmu
 
   reg:
-    items:
-      - description: Core GMU registers
-      - description: GMU PDC registers
-      - description: GMU PDC sequence registers
+    minItems: 3
+    maxItems: 4
 
   reg-names:
-    items:
-      - const: gmu
-      - const: gmu_pdc
-      - const: gmu_pdc_seq
+    minItems: 3
+    maxItems: 4
 
   clocks:
-    items:
-      - description: GMU clock
-      - description: GPU CX clock
-      - description: GPU AXI clock
-      - description: GPU MEMNOC clock
+    minItems: 4
+    maxItems: 7
 
   clock-names:
-    items:
-      - const: gmu
-      - const: cxo
-      - const: axi
-      - const: memnoc
+    minItems: 4
+    maxItems: 7
 
   interrupts:
     items:
@@ -76,6 +65,9 @@ properties:
 
   operating-points-v2: true
 
+  opp-table:
+    type: object
+
 required:
   - compatible
   - reg
@@ -91,6 +83,140 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-618.0
+              - qcom,adreno-gmu-630.2
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: GMU PDC registers
+            - description: GMU PDC sequence registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: gmu_pdc
+            - const: gmu_pdc_seq
+        clocks:
+          items:
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+        clock-names:
+          items:
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-635.0
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: Resource controller registers
+            - description: GMU PDC registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: rscc
+            - const: gmu_pdc
+        clocks:
+          items:
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+            - description: GPU AHB clock
+            - description: GPU HUB CX clock
+            - description: GPU SMMU vote clock
+        clock-names:
+          items:
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+            - const: ahb
+            - const: hub
+            - const: smmu_vote
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-640.1
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: GMU PDC registers
+            - description: GMU PDC sequence registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: gmu_pdc
+            - const: gmu_pdc_seq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-650.2
+    then:
+      properties:
+        reg:
+          items:
+            - description: Core GMU registers
+            - description: Resource controller registers
+            - description: GMU PDC registers
+            - description: GMU PDC sequence registers
+        reg-names:
+          items:
+            - const: gmu
+            - const: rscc
+            - const: gmu_pdc
+            - const: gmu_pdc_seq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,adreno-gmu-640.1
+              - qcom,adreno-gmu-650.2
+    then:
+      properties:
+        clocks:
+          items:
+            - description: GPU AHB clock
+            - description: GMU clock
+            - description: GPU CX clock
+            - description: GPU AXI clock
+            - description: GPU MEMNOC clock
+        clock-names:
+          items:
+            - const: ahb
+            - const: gmu
+            - const: cxo
+            - const: axi
+            - const: memnoc
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
deleted file mode 100644
index 090dcb3fc34d..000000000000
--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ /dev/null
@@ -1,157 +0,0 @@
-Qualcomm adreno/snapdragon GPU
-
-Required properties:
-- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or
-	      "amd,imageon-XYZ.W", "amd,imageon"
-    for example: "qcom,adreno-306.0", "qcom,adreno"
-  Note that you need to list the less specific "qcom,adreno" (since this
-  is what the device is matched on), in addition to the more specific
-  with the chip-id.
-  If "amd,imageon" is used, there should be no top level msm device.
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The interrupt signal from the gpu.
-- clocks: device clocks (if applicable)
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required by a3xx, a4xx and a5xx
-  cores:
-  * "core"
-  * "iface"
-  * "mem_iface"
-  For GMU attached devices the GPU clocks are not used and are not required. The
-  following devices should not list clocks:
-   - qcom,adreno-630.2
-- iommus: optional phandle to an adreno iommu instance
-- operating-points-v2: optional phandle to the OPP operating points
-- interconnects: optional phandle to an interconnect provider.  See
-  ../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms
-  will have two paths; all others will have one path.
-- interconnect-names: The names of the interconnect paths that correspond to the
-  interconnects property. Values must be gfx-mem and ocmem.
-- qcom,gmu: For GMU attached devices a phandle to the GMU device that will
-  control the power for the GPU. Applicable targets:
-    - qcom,adreno-630.2
-- zap-shader: For a5xx and a6xx devices this node contains a memory-region that
-  points to reserved memory to store the zap shader that can be used to help
-  bring the GPU out of secure mode.
-- firmware-name: optional property of the 'zap-shader' node, listing the
-  relative path of the device specific zap firmware.
-- sram: phandle to the On Chip Memory (OCMEM) that's present on some a3xx and
-        a4xx Snapdragon SoCs. See
-        Documentation/devicetree/bindings/sram/qcom,ocmem.yaml.
-
-Optional properties:
-- #cooling-cells: The value must be 2. For details, please refer
-	Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml.
-
-Example 3xx/4xx:
-
-/ {
-	...
-
-	gpu: adreno@fdb00000 {
-		compatible = "qcom,adreno-330.2",
-		             "qcom,adreno";
-		reg = <0xfdb00000 0x10000>;
-		reg-names = "kgsl_3d0_reg_memory";
-		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "kgsl_3d0_irq";
-		clock-names = "core",
-		              "iface",
-		              "mem_iface";
-		clocks = <&mmcc OXILI_GFX3D_CLK>,
-		         <&mmcc OXILICX_AHB_CLK>,
-		         <&mmcc OXILICX_AXI_CLK>;
-		sram = <&gpu_sram>;
-		power-domains = <&mmcc OXILICX_GDSC>;
-		operating-points-v2 = <&gpu_opp_table>;
-		iommus = <&gpu_iommu 0>;
-		#cooling-cells = <2>;
-	};
-
-	gpu_sram: ocmem@fdd00000 {
-		compatible = "qcom,msm8974-ocmem";
-
-		reg = <0xfdd00000 0x2000>,
-		      <0xfec00000 0x180000>;
-		reg-names = "ctrl",
-		            "mem";
-
-		clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
-		         <&mmcc OCMEMCX_OCMEMNOC_CLK>;
-		clock-names = "core",
-		              "iface";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		gpu_sram: gpu-sram@0 {
-			reg = <0x0 0x100000>;
-			ranges = <0 0 0xfec00000 0x100000>;
-		};
-	};
-};
-
-Example a6xx (with GMU):
-
-/ {
-	...
-
-	gpu@5000000 {
-		compatible = "qcom,adreno-630.2", "qcom,adreno";
-		#stream-id-cells = <16>;
-
-		reg = <0x5000000 0x40000>, <0x509e000 0x10>;
-		reg-names = "kgsl_3d0_reg_memory", "cx_mem";
-
-		#cooling-cells = <2>;
-
-		/*
-		 * Look ma, no clocks! The GPU clocks and power are
-		 * controlled entirely by the GMU
-		 */
-
-		interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
-
-		iommus = <&adreno_smmu 0>;
-
-		operating-points-v2 = <&gpu_opp_table>;
-
-		interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
-		interconnect-names = "gfx-mem";
-
-		gpu_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			opp-430000000 {
-				opp-hz = /bits/ 64 <430000000>;
-				opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-				opp-peak-kBps = <5412000>;
-			};
-
-			opp-355000000 {
-				opp-hz = /bits/ 64 <355000000>;
-				opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-				opp-peak-kBps = <3072000>;
-			};
-
-			opp-267000000 {
-				opp-hz = /bits/ 64 <267000000>;
-				opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-				opp-peak-kBps = <3072000>;
-			};
-
-			opp-180000000 {
-				opp-hz = /bits/ 64 <180000000>;
-				opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-				opp-peak-kBps = <1804000>;
-			};
-		};
-
-		qcom,gmu = <&gmu>;
-
-		zap-shader {
-			memory-region = <&zap_shader_region>;
-			firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml
new file mode 100644
index 000000000000..5dabe7b6794b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml
@@ -0,0 +1,294 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/display/msm/gpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Adreno or Snapdragon GPUs
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - description: |
+          The driver is parsing the compat string for Adreno to
+          figure out the gpu-id and patch level.
+        items:
+          - pattern: '^qcom,adreno-[3-6][0-9][0-9]\.[0-9]$'
+          - const: qcom,adreno
+      - description: |
+          The driver is parsing the compat string for Imageon to
+          figure out the gpu-id and patch level.
+        items:
+          - pattern: '^amd,imageon-200\.[0-1]$'
+          - const: amd,imageon
+
+  clocks: true
+
+  clock-names: true
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: kgsl_3d0_reg_memory
+      - const: cx_mem
+      - const: cx_dbgc
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+  interconnects:
+    minItems: 1
+    maxItems: 2
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: gfx-mem
+      - const: ocmem
+
+  iommus:
+    minItems: 1
+    maxItems: 64
+
+  sram:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 4
+    items:
+      maxItems: 1
+    description: |
+      phandles to one or more reserved on-chip SRAM regions.
+      phandle to the On Chip Memory (OCMEM) that's present on some a3xx and
+      a4xx Snapdragon SoCs. See
+      Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  power-domains:
+    maxItems: 1
+
+  zap-shader:
+    type: object
+    additionalProperties: false
+    description: |
+      For a5xx and a6xx devices this node contains a memory-region that
+      points to reserved memory to store the zap shader that can be used to
+      help bring the GPU out of secure mode.
+    properties:
+      memory-region:
+        maxItems: 1
+
+      firmware-name:
+        description: |
+          Default name of the firmware to load to the remote processor.
+
+  "#cooling-cells":
+    const: 2
+
+  nvmem-cell-names:
+    maxItems: 1
+
+  nvmem-cells:
+    description: efuse registers
+    maxItems: 1
+
+  qcom,gmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      For GMU attached devices a phandle to the GMU device that will
+      control the power for the GPU.
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            pattern: '^qcom,adreno-[3-5][0-9][0-9]\.[0-9]$'
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 7
+
+        clock-names:
+          items:
+            anyOf:
+              - const: core
+                description: GPU Core clock
+              - const: iface
+                description: GPU Interface clock
+              - const: mem
+                description: GPU Memory clock
+              - const: mem_iface
+                description: GPU Memory Interface clock
+              - const: alt_mem_iface
+                description: GPU Alternative Memory Interface clock
+              - const: gfx3d
+                description: GPU 3D engine clock
+              - const: rbbmtimer
+                description: GPU RBBM Timer for Adreno 5xx series
+              - const: rbcpr
+                description: GPU RB Core Power Reduction clock
+          minItems: 2
+          maxItems: 7
+
+      required:
+        - clocks
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            pattern: '^qcom,adreno-6[0-9][0-9]\.[0-9]$'
+
+    then: # Since Adreno 6xx series clocks should be defined in GMU
+      properties:
+        clocks: false
+        clock-names: false
+
+examples:
+  - |
+
+    // Example a3xx/4xx:
+
+    #include <dt-bindings/clock/qcom,mmcc-msm8974.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpu: gpu@fdb00000 {
+        compatible = "qcom,adreno-330.2", "qcom,adreno";
+
+        reg = <0xfdb00000 0x10000>;
+        reg-names = "kgsl_3d0_reg_memory";
+
+        clock-names = "core", "iface", "mem_iface";
+        clocks = <&mmcc OXILI_GFX3D_CLK>,
+                 <&mmcc OXILICX_AHB_CLK>,
+                 <&mmcc OXILICX_AXI_CLK>;
+
+        interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "kgsl_3d0_irq";
+
+        sram = <&gpu_sram>;
+        power-domains = <&mmcc OXILICX_GDSC>;
+        operating-points-v2 = <&gpu_opp_table>;
+        iommus = <&gpu_iommu 0>;
+        #cooling-cells = <2>;
+    };
+
+    ocmem@fdd00000 {
+        compatible = "qcom,msm8974-ocmem";
+
+        reg = <0xfdd00000 0x2000>,
+              <0xfec00000 0x180000>;
+        reg-names = "ctrl", "mem";
+
+        clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+                 <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+        clock-names = "core", "iface";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0xfec00000 0x100000>;
+
+        gpu_sram: gpu-sram@0 {
+            reg = <0x0 0x100000>;
+        };
+    };
+  - |
+
+    // Example a6xx (with GMU):
+
+    #include <dt-bindings/clock/qcom,gpucc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        zap_shader_region: gpu@8f200000 {
+            compatible = "shared-dma-pool";
+            reg = <0x0 0x90b00000 0x0 0xa00000>;
+            no-map;
+        };
+    };
+
+    gpu@5000000 {
+        compatible = "qcom,adreno-630.2", "qcom,adreno";
+
+        reg = <0x5000000 0x40000>, <0x509e000 0x10>;
+        reg-names = "kgsl_3d0_reg_memory", "cx_mem";
+
+        #cooling-cells = <2>;
+
+        interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+        iommus = <&adreno_smmu 0>;
+
+        operating-points-v2 = <&gpu_opp_table>;
+
+        interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
+        interconnect-names = "gfx-mem";
+
+        qcom,gmu = <&gmu>;
+
+        gpu_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-430000000 {
+                opp-hz = /bits/ 64 <430000000>;
+                opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+                opp-peak-kBps = <5412000>;
+            };
+
+            opp-355000000 {
+                opp-hz = /bits/ 64 <355000000>;
+                opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+                opp-peak-kBps = <3072000>;
+            };
+
+            opp-267000000 {
+                opp-hz = /bits/ 64 <267000000>;
+                opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+                opp-peak-kBps = <3072000>;
+            };
+
+            opp-180000000 {
+                opp-hz = /bits/ 64 <180000000>;
+                opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+                opp-peak-kBps = <1804000>;
+            };
+        };
+
+        zap-shader {
+            memory-region = <&zap_shader_region>;
+            firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
deleted file mode 100644
index 5f90a40da51b..000000000000
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-Qualcomm adreno/snapdragon hdmi output
-
-Required properties:
-- compatible: one of the following
-   * "qcom,hdmi-tx-8996"
-   * "qcom,hdmi-tx-8994"
-   * "qcom,hdmi-tx-8084"
-   * "qcom,hdmi-tx-8974"
-   * "qcom,hdmi-tx-8660"
-   * "qcom,hdmi-tx-8960"
-- reg: Physical base address and length of the controller's registers
-- reg-names: "core_physical"
-- interrupts: The interrupt signal from the hdmi block.
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See ../clocks/clock-bindings.txt for details.
-- core-vdda-supply: phandle to supply regulator
-- hdmi-mux-supply: phandle to mux regulator
-- phys: the phandle for the HDMI PHY device
-- phy-names: the name of the corresponding PHY device
-
-Optional properties:
-- hpd-gpios: hpd pin
-- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin
-- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin
-- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin
-- power-domains: reference to the power domain(s), if available.
-- pinctrl-names: the pin control state names; should contain "default"
-- pinctrl-0: the default pinctrl state (active)
-- pinctrl-1: the "sleep" pinctrl state
-
-HDMI PHY:
-Required properties:
-- compatible: Could be the following
-  * "qcom,hdmi-phy-8660"
-  * "qcom,hdmi-phy-8960"
-  * "qcom,hdmi-phy-8974"
-  * "qcom,hdmi-phy-8084"
-  * "qcom,hdmi-phy-8996"
-- #phy-cells: Number of cells in a PHY specifier; Should be 0.
-- reg: Physical base address and length of the registers of the PHY sub blocks.
-- reg-names: The names of register regions. The following regions are required:
-  * "hdmi_phy"
-  * "hdmi_pll"
-  For HDMI PHY on msm8996, these additional register regions are required:
-    * "hdmi_tx_l0"
-    * "hdmi_tx_l1"
-    * "hdmi_tx_l3"
-    * "hdmi_tx_l4"
-- power-domains: Should be <&mmcc MDSS_GDSC>.
-- clocks: device clocks
-  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- core-vdda-supply: phandle to vdda regulator device node
-
-Example:
-
-/ {
-	...
-
-	hdmi: hdmi@4a00000 {
-		compatible = "qcom,hdmi-tx-8960";
-		reg-names = "core_physical";
-		reg = <0x04a00000 0x2f0>;
-		interrupts = <GIC_SPI 79 0>;
-		power-domains = <&mmcc MDSS_GDSC>;
-		clock-names =
-		    "core",
-		    "master_iface",
-		    "slave_iface";
-		clocks =
-		    <&mmcc HDMI_APP_CLK>,
-		    <&mmcc HDMI_M_AHB_CLK>,
-		    <&mmcc HDMI_S_AHB_CLK>;
-		qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>;
-		qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>;
-		qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
-		core-vdda-supply = <&pm8921_hdmi_mvs>;
-		hdmi-mux-supply = <&ext_3p3v>;
-		pinctrl-names = "default", "sleep";
-		pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
-		pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
-
-		phys = <&hdmi_phy>;
-		phy-names = "hdmi_phy";
-	};
-
-	hdmi_phy: phy@4a00400 {
-		compatible = "qcom,hdmi-phy-8960";
-		reg-names = "hdmi_phy",
-			    "hdmi_pll";
-		reg = <0x4a00400 0x60>,
-		      <0x4a00500 0x100>;
-		#phy-cells = <0>;
-		power-domains = <&mmcc MDSS_GDSC>;
-		clock-names = "slave_iface";
-		clocks = <&mmcc HDMI_S_AHB_CLK>;
-		core-vdda-supply = <&pm8921_hdmi_mvs>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.yaml b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
new file mode 100644
index 000000000000..47e97669821c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/display/msm/hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon HDMI output
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - qcom,hdmi-tx-8084
+      - qcom,hdmi-tx-8660
+      - qcom,hdmi-tx-8960
+      - qcom,hdmi-tx-8974
+      - qcom,hdmi-tx-8994
+      - qcom,hdmi-tx-8996
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: core_physical
+      - const: qfprom_physical
+      - const: hdcp_physical
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    enum:
+      - hdmi_phy
+      - hdmi-phy
+    deprecated: true
+
+  core-vdda-supply:
+    description: phandle to VDDA supply regulator
+
+  hdmi-mux-supply:
+    description: phandle to mux regulator
+    deprecated: true
+
+  core-vcc-supply:
+    description: phandle to VCC supply regulator
+
+  hpd-gpios:
+    maxItems: 1
+    description: hpd pin
+
+  qcom,hdmi-tx-mux-en-gpios:
+    maxItems: 1
+    deprecated: true
+    description: HDMI mux enable pin
+
+  qcom,hdmi-tx-mux-sel-gpios:
+    maxItems: 1
+    deprecated: true
+    description: HDMI mux select pin
+
+  qcom,hdmi-tx-mux-lpm-gpios:
+    maxItems: 1
+    deprecated: true
+    description: HDMI mux lpm pin
+
+  '#sound-dai-cells':
+    const: 1
+
+  ports:
+    type: object
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: |
+          Input endpoints of the controller.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: |
+          Output endpoints of the controller.
+
+    required:
+      - port@0
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg
+  - reg-names
+  - interrupts
+  - phys
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-tx-8960
+              - qcom,hdmi-tx-8660
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: core
+            - const: master_iface
+            - const: slave_iface
+        core-vcc-supplies: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,hdmi-tx-8974
+              - qcom,hdmi-tx-8084
+              - qcom,hdmi-tx-8994
+              - qcom,hdmi-tx-8996
+    then:
+      properties:
+        clocks:
+          minItems: 5
+        clock-names:
+          items:
+            - const: mdp_core
+            - const: iface
+            - const: core
+            - const: alt_iface
+            - const: extp
+        hdmi-mux-supplies: false
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    hdmi: hdmi@4a00000 {
+      compatible = "qcom,hdmi-tx-8960";
+      reg-names = "core_physical";
+      reg = <0x04a00000 0x2f0>;
+      interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+      clock-names = "core",
+                    "master_iface",
+                    "slave_iface";
+      clocks = <&clk 61>,
+               <&clk 72>,
+               <&clk 98>;
+      hpd-gpios = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
+      core-vdda-supply = <&pm8921_hdmi_mvs>;
+      hdmi-mux-supply = <&ext_3p3v>;
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
+      pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
+
+      phys = <&hdmi_phy>;
+    };
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    hdmi@9a0000 {
+      compatible = "qcom,hdmi-tx-8996";
+      reg = <0x009a0000 0x50c>,
+            <0x00070000 0x6158>,
+            <0x009e0000 0xfff>;
+      reg-names = "core_physical",
+                  "qfprom_physical",
+                  "hdcp_physical";
+
+      interrupt-parent = <&mdss>;
+      interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+
+      clocks = <&mmcc MDSS_MDP_CLK>,
+               <&mmcc MDSS_AHB_CLK>,
+               <&mmcc MDSS_HDMI_CLK>,
+               <&mmcc MDSS_HDMI_AHB_CLK>,
+               <&mmcc MDSS_EXTPCLK_CLK>;
+      clock-names = "mdp_core",
+                    "iface",
+                    "core",
+                    "alt_iface",
+                    "extp";
+
+      phys = <&hdmi_phy>;
+      #sound-dai-cells = <1>;
+
+      pinctrl-names = "default", "sleep";
+      pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+      pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+      core-vdda-supply = <&vreg_l12a_1p8>;
+      core-vcc-supply = <&vreg_s4a_1p8>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          endpoint {
+            remote-endpoint = <&mdp5_intf3_out>;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.txt b/Documentation/devicetree/bindings/display/msm/mdp4.txt
deleted file mode 100644
index b07eeb38f709..000000000000
--- a/Documentation/devicetree/bindings/display/msm/mdp4.txt
+++ /dev/null
@@ -1,114 +0,0 @@
-Qualcomm adreno/snapdragon MDP4 display controller
-
-Description:
-
-This is the bindings documentation for the MDP4 display controller found in
-SoCs like MSM8960, APQ8064 and MSM8660.
-
-Required properties:
-- compatible:
-  * "qcom,mdp4" - mdp4
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The interrupt signal from the display controller.
-- clocks: device clocks
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
-  * "core_clk"
-  * "iface_clk"
-  * "bus_clk"
-  * "lut_clk"
-  * "hdmi_clk"
-  * "tv_clk"
-- ports: contains the list of output ports from MDP. These connect to interfaces
-  that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
-  special case since it is a part of the MDP block itself).
-
-  Each output port contains an endpoint that describes how it is connected to an
-  external interface. These are described by the standard properties documented
-  here:
-	Documentation/devicetree/bindings/graph.txt
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-
-  The output port mappings are:
-	Port 0 -> LCDC/LVDS
-	Port 1 -> DSI1 Cmd/Video
-	Port 2 -> DSI2 Cmd/Video
-	Port 3 -> DTV
-
-Optional properties:
-- clock-names: the following clocks are optional:
-  * "lut_clk"
-- qcom,lcdc-align-lsb: Boolean value indicating that LSB alignment should be
-  used for LCDC. This is only valid for 18bpp panels.
-
-Example:
-
-/ {
-	...
-
-	hdmi: hdmi@4a00000 {
-		...
-		ports {
-			...
-			port@0 {
-				reg = <0>;
-				hdmi_in: endpoint {
-					remote-endpoint = <&mdp_dtv_out>;
-				};
-			};
-			...
-		};
-		...
-	};
-
-	...
-
-	mdp: mdp@5100000 {
-		compatible = "qcom,mdp4";
-		reg = <0x05100000 0xf0000>;
-		interrupts = <GIC_SPI 75 0>;
-		clock-names =
-		    "core_clk",
-		    "iface_clk",
-		    "lut_clk",
-		    "hdmi_clk",
-		    "tv_clk";
-		clocks =
-		    <&mmcc MDP_CLK>,
-		    <&mmcc MDP_AHB_CLK>,
-		    <&mmcc MDP_AXI_CLK>,
-		    <&mmcc MDP_LUT_CLK>,
-		    <&mmcc HDMI_TV_CLK>,
-		    <&mmcc MDP_TV_CLK>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					mdp_lvds_out: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					mdp_dsi1_out: endpoint {
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					mdp_dsi2_out: endpoint {
-					};
-				};
-
-				port@3 {
-					reg = <3>;
-					mdp_dtv_out: endpoint {
-						remote-endpoint = <&hdmi_in>;
-					};
-				};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.yaml b/Documentation/devicetree/bindings/display/msm/mdp4.yaml
new file mode 100644
index 000000000000..35204a287579
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/mdp4.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/mdp4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon MDP4 display controller
+
+description: >
+  MDP4 display controller found in SoCs like MSM8960, APQ8064 and MSM8660.
+
+maintainers:
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    const: qcom,mdp4
+
+  clocks:
+    minItems: 6
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: core_clk
+      - const: iface_clk
+      - const: bus_clk
+      - const: lut_clk
+      - const: hdmi_clk
+      - const: tv_clk
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 4
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: LCDC/LVDS
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI1 Cmd / Video
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: DSI2 Cmd / Video
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Digital TV
+
+  qcom,lcdc-align-lsb:
+    type: boolean
+    description: >
+      Indication that LSB alignment should be used for LCDC.
+      This is only valid for 18bpp panels.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    mdp: mdp@5100000 {
+        compatible = "qcom,mdp4";
+        reg = <0x05100000 0xf0000>;
+        interrupts = <0 75 0>;
+        clock-names =
+            "core_clk",
+            "iface_clk",
+            "bus_clk",
+            "lut_clk",
+            "hdmi_clk",
+            "tv_clk";
+        clocks =
+            <&mmcc 77>,
+            <&mmcc 86>,
+            <&mmcc 102>,
+            <&mmcc 75>,
+            <&mmcc 97>,
+            <&mmcc 12>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                mdp_lvds_out: endpoint {
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                mdp_dsi1_out: endpoint {
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                mdp_dsi2_out: endpoint {
+                };
+            };
+
+            port@3 {
+                reg = <3>;
+                mdp_dtv_out: endpoint {
+                    remote-endpoint = <&hdmi_in>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt
deleted file mode 100644
index 43d11279c925..000000000000
--- a/Documentation/devicetree/bindings/display/msm/mdp5.txt
+++ /dev/null
@@ -1,160 +0,0 @@
-Qualcomm adreno/snapdragon MDP5 display controller
-
-Description:
-
-This is the bindings documentation for the Mobile Display Subsytem(MDSS) that
-encapsulates sub-blocks like MDP5, DSI, HDMI, eDP etc, and the MDP5 display
-controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994 and MSM8996.
-
-MDSS:
-Required properties:
-- compatible:
-  * "qcom,mdss" - MDSS
-- reg: Physical base address and length of the controller's registers.
-- reg-names: The names of register regions. The following regions are required:
-  * "mdss_phys"
-  * "vbif_phys"
-- interrupts: The interrupt signal from MDSS.
-- interrupt-controller: identifies the node as an interrupt controller.
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- power-domains: a power domain consumer specifier according to
-  Documentation/devicetree/bindings/power/power_domain.txt
-- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
-  * "iface"
-  * "bus"
-  * "vsync"
-- #address-cells: number of address cells for the MDSS children. Should be 1.
-- #size-cells: Should be 1.
-- ranges: parent bus address space is the same as the child bus address space.
-
-Optional properties:
-- clock-names: the following clocks are optional:
-  * "lut"
-
-MDP5:
-Required properties:
-- compatible:
-  * "qcom,mdp5" - MDP5
-- reg: Physical base address and length of the controller's registers.
-- reg-names: The names of register regions. The following regions are required:
-  * "mdp_phys"
-- interrupts: Interrupt line from MDP5 to MDSS interrupt controller.
-- clocks: device clocks. See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required.
--   * "bus"
--   * "iface"
--   * "core"
--   * "vsync"
-- ports: contains the list of output ports from MDP. These connect to interfaces
-  that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a
-  special case since it is a part of the MDP block itself).
-
-  Each output port contains an endpoint that describes how it is connected to an
-  external interface. These are described by the standard properties documented
-  here:
-	Documentation/devicetree/bindings/graph.txt
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-
-  The availability of output ports can vary across SoC revisions:
-
-  For MSM8974 and APQ8084:
-	 Port 0 -> MDP_INTF0 (eDP)
-	 Port 1 -> MDP_INTF1 (DSI1)
-	 Port 2 -> MDP_INTF2 (DSI2)
-	 Port 3 -> MDP_INTF3 (HDMI)
-
-  For MSM8916:
-	 Port 0 -> MDP_INTF1 (DSI1)
-
-  For MSM8994 and MSM8996:
-	 Port 0 -> MDP_INTF1 (DSI1)
-	 Port 1 -> MDP_INTF2 (DSI2)
-	 Port 2 -> MDP_INTF3 (HDMI)
-
-Optional properties:
-- clock-names: the following clocks are optional:
-  * "lut"
-  * "tbu"
-  * "tbu_rt"
-
-Example:
-
-/ {
-	...
-
-	mdss: mdss@1a00000 {
-		compatible = "qcom,mdss";
-		reg = <0x1a00000 0x1000>,
-		      <0x1ac8000 0x3000>;
-		reg-names = "mdss_phys", "vbif_phys";
-
-		power-domains = <&gcc MDSS_GDSC>;
-
-		clocks = <&gcc GCC_MDSS_AHB_CLK>,
-			 <&gcc GCC_MDSS_AXI_CLK>,
-			 <&gcc GCC_MDSS_VSYNC_CLK>;
-		clock-names = "iface",
-			      "bus",
-			      "vsync"
-
-		interrupts = <0 72 0>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mdp: mdp@1a01000 {
-			compatible = "qcom,mdp5";
-			reg = <0x1a01000 0x90000>;
-			reg-names = "mdp_phys";
-
-			interrupt-parent = <&mdss>;
-			interrupts = <0 0>;
-
-			clocks = <&gcc GCC_MDSS_AHB_CLK>,
-				 <&gcc GCC_MDSS_AXI_CLK>,
-				 <&gcc GCC_MDSS_MDP_CLK>,
-				 <&gcc GCC_MDSS_VSYNC_CLK>;
-			clock-names = "iface",
-				      "bus",
-				      "core",
-				      "vsync";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					mdp5_intf1_out: endpoint {
-						remote-endpoint = <&dsi0_in>;
-					};
-				};
-			};
-		};
-
-		dsi0: dsi@1a98000 {
-			...
-			ports {
-				...
-				port@0 {
-					reg = <0>;
-					dsi0_in: endpoint {
-						remote-endpoint = <&mdp5_intf1_out>;
-					};
-				};
-				...
-			};
-			...
-		};
-
-		dsi_phy0: dsi-phy@1a98300 {
-			...
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
new file mode 100644
index 000000000000..ccd7d6417523
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/mdss-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display MDSS common properties
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Rob Clark <robdclark@gmail.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc.
+
+# Do not select this by default, otherwise it is also selected for qcom,mdss
+# devices.
+select:
+  false
+
+properties:
+  $nodename:
+    pattern: "^display-subsystem@[0-9a-f]+$"
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    const: mdss
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    maxItems: 4
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  "#interrupt-cells":
+    const: 1
+
+  iommus:
+    minItems: 1
+    items:
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
+      - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
+
+  ranges: true
+
+  interconnects:
+    minItems: 1
+    items:
+      - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+      - description: Interconnect path from mdp1 port to the data bus
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: mdp0-mem
+      - const: mdp1-mem
+
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
+required:
+  - reg
+  - reg-names
+  - power-domains
+  - clocks
+  - interrupts
+  - interrupt-controller
+  - iommus
+  - ranges
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
new file mode 100644
index 000000000000..a763cf8da122
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdp5.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,mdp5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Adreno/Snapdragon Mobile Display controller (MDP5)
+
+description:
+  MDP5 display controller found in SoCs like MSM8974, APQ8084, MSM8916, MSM8994
+  and MSM8996.
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Rob Clark <robdclark@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,mdp5
+        deprecated: true
+      - items:
+          - enum:
+              - qcom,apq8084-mdp5
+              - qcom,msm8916-mdp5
+              - qcom,msm8917-mdp5
+              - qcom,msm8953-mdp5
+              - qcom,msm8974-mdp5
+              - qcom,msm8976-mdp5
+              - qcom,msm8994-mdp5
+              - qcom,msm8996-mdp5
+              - qcom,sdm630-mdp5
+              - qcom,sdm660-mdp5
+          - const: qcom,mdp5
+
+  $nodename:
+    pattern: '^display-controller@[0-9a-f]+$'
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: mdp_phys
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 4
+    maxItems: 7
+
+  clock-names:
+    oneOf:
+      - minItems: 4
+        items:
+          - const: iface
+          - const: bus
+          - const: core
+          - const: vsync
+          - const: lut
+          - const: tbu
+          - const: tbu_rt
+        # MSM8996 has additional iommu clock
+      - items:
+          - const: iface
+          - const: bus
+          - const: core
+          - const: iommu
+          - const: vsync
+
+  interconnects:
+    minItems: 1
+    items:
+      - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
+      - description: Interconnect path from mdp1 port to the data bus
+      - description: Interconnect path from rotator port to the data bus
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: mdp0-mem
+      - const: mdp1-mem
+      - const: rotator-mem
+
+  iommus:
+    items:
+      - description: apps SMMU with the Stream-ID mask for Hard-Fail port0
+
+  power-domains:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: >
+      Contains the list of output ports from DPU device. These ports
+      connect to interfaces that are external to the DPU hardware,
+      such as DSI, DP etc. MDP5 devices support up to 4 ports:
+      one or two DSI ports, HDMI and eDP.
+
+    patternProperties:
+      "^port@[0-3]+$":
+        $ref: /schemas/graph.yaml#/properties/port
+
+    # at least one port is required
+    required:
+      - port@0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    display-controller@1a01000 {
+        compatible = "qcom,mdp5";
+        reg = <0x1a01000 0x90000>;
+        reg-names = "mdp_phys";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        clocks = <&gcc GCC_MDSS_AHB_CLK>,
+                 <&gcc GCC_MDSS_AXI_CLK>,
+                 <&gcc GCC_MDSS_MDP_CLK>,
+                 <&gcc GCC_MDSS_VSYNC_CLK>;
+        clock-names = "iface",
+                      "bus",
+                      "core",
+                      "vsync";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
new file mode 100644
index 000000000000..b0100105e428
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,mdss.yaml
@@ -0,0 +1,211 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Mobile Display SubSystem (MDSS)
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+  - Rob Clark <robdclark@gmail.com>
+
+description:
+  This is the bindings documentation for the Mobile Display Subsytem(MDSS) that
+  encapsulates sub-blocks like MDP5, DSI, HDMI, eDP, etc.
+
+properties:
+  $nodename:
+    pattern: "^display-subsystem@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - qcom,mdss
+
+  reg:
+    minItems: 2
+    maxItems: 3
+
+  reg-names:
+    minItems: 2
+    items:
+      - const: mdss_phys
+      - const: vbif_phys
+      - const: vbif_nrt_phys
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+    description: |
+      The MDSS power domain provided by GCC
+
+  clocks:
+    oneOf:
+      - minItems: 3
+        items:
+          - description: Display abh clock
+          - description: Display axi clock
+          - description: Display vsync clock
+          - description: Display core clock
+      - minItems: 1
+        items:
+          - description: Display abh clock
+          - description: Display core clock
+
+  clock-names:
+    oneOf:
+      - minItems: 3
+        items:
+          - const: iface
+          - const: bus
+          - const: vsync
+          - const: core
+      - minItems: 1
+        items:
+          - const: iface
+          - const: core
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+  resets:
+    items:
+      - description: MDSS_CORE reset
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - power-domains
+  - clocks
+  - clock-names
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+patternProperties:
+  "^display-controller@[1-9a-f][0-9a-f]*$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,mdp5
+
+  "^dsi@[1-9a-f][0-9a-f]*$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        contains:
+          const: qcom,mdss-dsi-ctrl
+
+  "^phy@[1-9a-f][0-9a-f]*$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        enum:
+          - qcom,dsi-phy-14nm
+          - qcom,dsi-phy-14nm-660
+          - qcom,dsi-phy-14nm-8953
+          - qcom,dsi-phy-20nm
+          - qcom,dsi-phy-28nm-hpm
+          - qcom,dsi-phy-28nm-lp
+          - qcom,hdmi-phy-8084
+          - qcom,hdmi-phy-8660
+          - qcom,hdmi-phy-8960
+          - qcom,hdmi-phy-8974
+          - qcom,hdmi-phy-8996
+
+  "^hdmi-tx@[1-9a-f][0-9a-f]*$":
+    type: object
+    additionalProperties: true
+    properties:
+      compatible:
+        enum:
+          - qcom,hdmi-tx-8084
+          - qcom,hdmi-tx-8660
+          - qcom,hdmi-tx-8960
+          - qcom,hdmi-tx-8974
+          - qcom,hdmi-tx-8994
+          - qcom,hdmi-tx-8996
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    display-subsystem@1a00000 {
+        compatible = "qcom,mdss";
+        reg = <0x1a00000 0x1000>,
+              <0x1ac8000 0x3000>;
+        reg-names = "mdss_phys", "vbif_phys";
+
+        power-domains = <&gcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_MDSS_AHB_CLK>,
+                 <&gcc GCC_MDSS_AXI_CLK>,
+                 <&gcc GCC_MDSS_VSYNC_CLK>;
+        clock-names = "iface",
+                      "bus",
+                      "vsync";
+
+        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@1a01000 {
+            compatible = "qcom,msm8916-mdp5", "qcom,mdp5";
+            reg = <0x01a01000 0x89000>;
+            reg-names = "mdp_phys";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            clocks = <&gcc GCC_MDSS_AHB_CLK>,
+                     <&gcc GCC_MDSS_AXI_CLK>,
+                     <&gcc GCC_MDSS_MDP_CLK>,
+                     <&gcc GCC_MDSS_VSYNC_CLK>;
+            clock-names = "iface",
+                      "bus",
+                      "core",
+                      "vsync";
+
+            iommus = <&apps_iommu 4>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdp5_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml
new file mode 100644
index 000000000000..8d3cd46260fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-dpu.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on MSM8998
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,msm8998-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for regdma register set
+      - description: Address offset and size for vbif register set
+      - description: Address offset and size for non-realtime vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: regdma
+      - const: vbif
+      - const: vbif_nrt
+
+  clocks:
+    items:
+      - description: Display ahb clock
+      - description: Display axi clock
+      - description: Display mem-noc clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: mnoc
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@c901000 {
+        compatible = "qcom,msm8998-dpu";
+        reg = <0x0c901000 0x8f000>,
+              <0x0c9a8e00 0xf0>,
+              <0x0c9b0000 0x2008>,
+              <0x0c9b8000 0x1040>;
+        reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
+
+        clocks = <&mmcc MDSS_AHB_CLK>,
+                 <&mmcc MDSS_AXI_CLK>,
+                 <&mmcc MNOC_AHB_CLK>,
+                 <&mmcc MDSS_MDP_CLK>,
+                 <&mmcc MDSS_VSYNC_CLK>;
+        clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmpd MSM8998_VDDMX>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml
new file mode 100644
index 000000000000..3c2b6ed98a56
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,msm8998-mdss.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,msm8998-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8998 Display MDSS
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for MSM8998 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,msm8998-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock
+      - description: Display AXI clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,msm8998-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,msm8998-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm-8998
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-msm8998.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@c900000 {
+        compatible = "qcom,msm8998-mdss";
+        reg = <0x0c900000 0x1000>;
+        reg-names = "mdss";
+
+        clocks = <&mmcc MDSS_AHB_CLK>,
+                 <&mmcc MDSS_AXI_CLK>,
+                 <&mmcc MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        #address-cells = <1>;
+        #interrupt-cells = <1>;
+        #size-cells = <1>;
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        iommus = <&mmss_smmu 0>;
+
+        power-domains = <&mmcc MDSS_GDSC>;
+        ranges;
+
+        display-controller@c901000 {
+            compatible = "qcom,msm8998-dpu";
+            reg = <0x0c901000 0x8f000>,
+                  <0x0c9a8e00 0xf0>,
+                  <0x0c9b0000 0x2008>,
+                  <0x0c9b8000 0x1040>;
+            reg-names = "mdp", "regdma", "vbif", "vbif_nrt";
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>,
+                     <&mmcc MNOC_AHB_CLK>,
+                     <&mmcc MDSS_MDP_CLK>,
+                     <&mmcc MDSS_VSYNC_CLK>;
+            clock-names = "iface", "bus", "mnoc", "core", "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDMX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@c994000 {
+            compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0c994000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&mmcc MDSS_BYTE0_CLK>,
+                     <&mmcc MDSS_BYTE0_INTF_CLK>,
+                     <&mmcc MDSS_PCLK0_CLK>,
+                     <&mmcc MDSS_ESC0_CLK>,
+                     <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@c994400 {
+            compatible = "qcom,dsi-phy-10nm-8998";
+            reg = <0x0c994400 0x200>,
+                  <0x0c994600 0x280>,
+                  <0x0c994a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&pm8998_l1>;
+        };
+
+        dsi@c996000 {
+            compatible = "qcom,msm8998-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0c996000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&mmcc MDSS_BYTE1_CLK>,
+                     <&mmcc MDSS_BYTE1_INTF_CLK>,
+                     <&mmcc MDSS_PCLK1_CLK>,
+                     <&mmcc MDSS_ESC1_CLK>,
+                     <&mmcc MDSS_AHB_CLK>,
+                     <&mmcc MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd MSM8998_VDDCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@c996400 {
+            compatible = "qcom,dsi-phy-10nm-8998";
+            reg = <0x0c996400 0x200>,
+                  <0x0c996600 0x280>,
+                  <0x0c996a00 0x10e>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&mmcc MDSS_AHB_CLK>,
+                     <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&pm8998_l1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml
new file mode 100644
index 000000000000..414f4e7ebdf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-dpu.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on QCM2290
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,qcm2290-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display AXI clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock from dispcc
+      - description: Display lut clock from dispcc
+      - description: Display vsync clock from dispcc
+
+  clock-names:
+    items:
+      - const: bus
+      - const: iface
+      - const: core
+      - const: lut
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@5e01000 {
+        compatible = "qcom,qcm2290-dpu";
+        reg = <0x05e01000 0x8f000>,
+              <0x05eb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus", "iface", "core", "lut", "vsync";
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmpd QCM2290_VDDCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
new file mode 100644
index 000000000000..2995b84b2cd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,qcm2290-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCM220 Display MDSS
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
+  are mentioned for QCM2290 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,qcm2290-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    maxItems: 1
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,qcm2290-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-ctrl-6g-qcm2290
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-14nm-2290
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,gcc-qcm2290.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,qcm2290.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@5e00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,qcm2290-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "core";
+
+        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>;
+        interconnect-names = "mdp0-mem";
+
+        iommus = <&apps_smmu 0x420 0x2>,
+                 <&apps_smmu 0x421 0x0>;
+        ranges;
+
+        display-controller@5e01000 {
+            compatible = "qcom,qcm2290-dpu";
+            reg = <0x05e01000 0x8f000>,
+                  <0x05eb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "core", "lut", "vsync";
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd QCM2290_VDDCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@5e94000 {
+            compatible = "qcom,dsi-ctrl-6g-qcm2290";
+            reg = <0x05e94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd QCM2290_VDDCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@5e94400 {
+            compatible = "qcom,dsi-phy-14nm-2290";
+            reg = <0x05e94400 0x100>,
+                  <0x05e94500 0x300>,
+                  <0x05e94800 0x188>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+            vcca-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
new file mode 100644
index 000000000000..1fb8321d9ee8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-dpu.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SC7180
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc7180-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi clock
+      - description: Display ahb clock
+      - description: Display rotator clock
+      - description: Display lut clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: iface
+      - const: rot
+      - const: lut
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sc7180-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus", "iface", "rot", "lut", "core",
+                      "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        power-domains = <&rpmhpd SC7180_CX>;
+        operating-points-v2 = <&mdp_opp_table>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@2 {
+                reg = <2>;
+                endpoint {
+                    remote-endpoint = <&dp_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
new file mode 100644
index 000000000000..42ef06edddc4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
@@ -0,0 +1,308 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7180-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SC7180 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc7180-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    maxItems: 1
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7180-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7180-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sc7180-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sc7180-mdss";
+        reg = <0xae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "ahb", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+        interconnect-names = "mdp0-mem";
+
+        iommus = <&apps_smmu 0x800 0x2>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sc7180-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "rot", "lut", "core",
+                          "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SC7180_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf0_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sc7180-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SC7180_CX>;
+
+            phys = <&dsi_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                    "dsi_phy_lane",
+                    "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,sc7180-dp";
+
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0xc00>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+            clock-names = "core_iface", "core_aux", "ctrl_link",
+                          "ctrl_link_iface", "stream_pixel";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+            assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+            phys = <&dp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd SC7180_CX>;
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    dp_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dp_out: endpoint { };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
new file mode 100644
index 000000000000..26dc073bd19a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-dpu.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SC7280
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc7280-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display ahb clock
+      - description: Display lut clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: nrt_bus
+      - const: iface
+      - const: lut
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sc7280-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus",
+                      "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        power-domains = <&rpmhpd SC7280_CX>;
+        operating-points-v2 = <&mdp_opp_table>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&edp_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
new file mode 100644
index 000000000000..078e1d1a7d2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
@@ -0,0 +1,427 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc7280-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SC7280.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc7280-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    maxItems: 1
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7280-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7280-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sc7280-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^edp@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc7280-edp
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - qcom,sc7280-dsi-phy-7nm
+          - qcom,sc7280-edp-phy
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7280.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sc7280.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sc7280-mdss";
+        reg = <0xae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface",
+                      "ahb",
+                      "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
+        interconnect-names = "mdp0-mem";
+
+        iommus = <&apps_smmu 0x900 0x402>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sc7280-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&gcc GCC_DISP_SF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SC7280_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf5_out: endpoint {
+                        remote-endpoint = <&edp_in>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    dpu_intf0_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sc7280-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SC7280_CX>;
+
+            phys = <&mdss_dsi_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        mdss_dsi_phy: phy@ae94400 {
+            compatible = "qcom,sc7280-dsi-phy-7nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x280>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+
+            vdds-supply = <&vreg_dsi_supply>;
+        };
+
+        edp@aea0000 {
+            compatible = "qcom,sc7280-edp";
+            pinctrl-names = "default";
+            pinctrl-0 = <&edp_hot_plug_det>;
+
+            reg = <0xaea0000 0x200>,
+                  <0xaea0200 0x200>,
+                  <0xaea0400 0xc00>,
+                  <0xaea1000 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <14>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
+            assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>;
+
+            phys = <&mdss_edp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&edp_opp_table>;
+            power-domains = <&rpmhpd SC7280_CX>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    edp_in: endpoint {
+                        remote-endpoint = <&dpu_intf5_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_edp_out: endpoint { };
+                };
+            };
+
+            edp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        mdss_edp_phy: phy@aec2a00 {
+            compatible = "qcom,sc7280-edp-phy";
+
+            reg = <0xaec2a00 0x19c>,
+                  <0xaec2200 0xa0>,
+                  <0xaec2600 0xa0>,
+                  <0xaec2000 0x1c0>;
+
+            clocks = <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_EDP_CLKREF_EN>;
+            clock-names = "aux",
+                          "cfg_ahb";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+        };
+
+        displayport-controller@ae90000 {
+            compatible = "qcom,sc7280-dp";
+
+            reg = <0xae90000 0x200>,
+                  <0xae90200 0x200>,
+                  <0xae90400 0xc00>,
+                  <0xae91000 0x400>,
+                  <0xae91400 0x400>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <12>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+            clock-names = "core_iface",
+                          "core_aux",
+                          "ctrl_link",
+                          "ctrl_link_iface",
+                          "stream_pixel";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+            assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+            phys = <&dp_phy>;
+            phy-names = "dp";
+
+            operating-points-v2 = <&dp_opp_table>;
+            power-domains = <&rpmhpd SC7280_CX>;
+
+            #sound-dai-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dp_in: endpoint {
+                        remote-endpoint = <&dpu_intf0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dp_out: endpoint { };
+                };
+            };
+
+            dp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160000000 {
+                    opp-hz = /bits/ 64 <160000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-270000000 {
+                    opp-hz = /bits/ 64 <270000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-540000000 {
+                    opp-hz = /bits/ 64 <540000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-810000000 {
+                    opp-hz = /bits/ 64 <810000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
new file mode 100644
index 000000000000..f2c8e16cf067
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-dpu.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Display Processing Unit
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  Device tree bindings for SC8280XP Display Processing Unit.
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc8280xp-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display ahb clock
+      - description: Display lut clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: nrt_bus
+      - const: iface
+      - const: lut
+      - const: core
+      - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sc8280xp-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus",
+                      "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        assigned-clocks = <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+                          <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <460000000>,
+                               <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+        interrupt-parent = <&mdss0>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&mdss0_dp0_in>;
+                };
+            };
+
+            port@4 {
+                reg = <4>;
+                endpoint {
+                    remote-endpoint = <&mdss0_dp1_in>;
+                };
+            };
+
+            port@5 {
+                reg = <5>;
+                endpoint {
+                    remote-endpoint = <&mdss0_dp3_in>;
+                };
+            };
+
+            port@6 {
+                reg = <6>;
+                endpoint {
+                    remote-endpoint = <&mdss0_dp2_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
new file mode 100644
index 000000000000..c239544bc37f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc8280xp-mdss.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sc8280xp-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Mobile Display Subsystem
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc8280xp-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AHB clock from dispcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ahb
+      - const: core
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sc8280xp-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        enum:
+          - qcom,sc8280xp-dp
+          - qcom,sc8280xp-edp
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
+    #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sc8280xp.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sc8280xp-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        power-domains = <&dispcc0 MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc0 DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface",
+                      "ahb",
+                      "core";
+
+        resets = <&dispcc0 DISP_CC_MDSS_CORE_BCR>;
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+                        <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        iommus = <&apps_smmu 0x1000 0x402>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sc8280xp-dpu";
+            reg = <0x0ae01000 0x8f000>,
+            <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&gcc GCC_DISP_SF_AXI_CLK>,
+                     <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc0 DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc0 DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc0 DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdss0_mdp_opp_table>;
+            power-domains = <&rpmhpd SC8280XP_MMCX>;
+
+            interrupt-parent = <&mdss0>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    endpoint {
+                        remote-endpoint = <&mdss0_dp0_in>;
+                    };
+                };
+
+                port@4 {
+                    reg = <4>;
+                    endpoint {
+                        remote-endpoint = <&mdss0_dp1_in>;
+                    };
+                };
+
+                port@5 {
+                    reg = <5>;
+                    endpoint {
+                        remote-endpoint = <&mdss0_dp3_in>;
+                    };
+                };
+
+                port@6 {
+                    reg = <6>;
+                    endpoint {
+                        remote-endpoint = <&mdss0_dp2_in>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
new file mode 100644
index 000000000000..0f7765d832e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SDM845
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm845-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display GCC bus clock
+      - description: Display ahb clock
+      - description: Display axi clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: gcc-bus
+      - const: iface
+      - const: bus
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sdm845-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+        power-domains = <&rpmhpd SDM845_CX>;
+        operating-points-v2 = <&mdp_opp_table>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml
new file mode 100644
index 000000000000..6ecb00920d7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sdm845-mdss.yaml
@@ -0,0 +1,280 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm845-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 Display MDSS
+
+maintainers:
+  - Krishna Manikandan <quic_mkrishn@quicinc.com>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SDM845 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm845-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sdm845-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sdm845-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sdm845-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sdm845-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x880 0x8>,
+                 <&apps_smmu 0xc80 0x8>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sdm845-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SDM845_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM845_CX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sdm845-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM845_CX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96a00 0x10e>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
new file mode 100644
index 000000000000..bf62c2f5325a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-dpu.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DPU on SM6115
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6115-dpu
+
+  reg:
+    items:
+      - description: MDP register set
+      - description: VBIF register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display AXI
+      - description: Display AHB
+      - description: Display core
+      - description: Display lut
+      - description: Display rotator
+      - description: Display vsync
+
+  clock-names:
+    items:
+      - const: bus
+      - const: iface
+      - const: core
+      - const: lut
+      - const: rot
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@5e01000 {
+        compatible = "qcom,sm6115-dpu";
+        reg = <0x05e01000 0x8f000>,
+              <0x05eb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmpd SM6115_VDDCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
new file mode 100644
index 000000000000..b9f83088f370
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6115-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6115 Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS
+  are mentioned for SM6115 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm6115-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display AXI clock
+      - description: Display core clock
+
+  iommus:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm6115-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        oneOf:
+          - items:
+              - const: qcom,sm6115-dsi-ctrl
+              - const: qcom,mdss-dsi-ctrl
+          - description: Old binding, please don't use
+            deprecated: true
+            const: qcom,dsi-ctrl-6g-qcm2290
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-14nm-2290
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm6115-dispcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm6115.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@5e00000 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "qcom,sm6115-mdss";
+        reg = <0x05e00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+        interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x420 0x2>,
+                 <&apps_smmu 0x421 0x0>;
+        ranges;
+
+        display-controller@5e01000 {
+            compatible = "qcom,sm6115-dpu";
+            reg = <0x05e01000 0x8f000>,
+                  <0x05eb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_ROT_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus", "iface", "core", "lut", "rot", "vsync";
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmpd SM6115_VDDCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@5e94000 {
+            compatible = "qcom,sm6115-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x05e94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmpd SM6115_VDDCX>;
+            phys = <&dsi0_phy>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi0_phy: phy@5e94400 {
+            compatible = "qcom,dsi-phy-14nm-2290";
+            reg = <0x05e94400 0x100>,
+                  <0x05e94500 0x300>,
+                  <0x05e94800 0x188>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml
new file mode 100644
index 000000000000..2b3f3fe9bdf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-dpu.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8150-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 Display DPU
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8150-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display ahb clock
+      - description: Display hf axi clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+      - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8150.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm8150-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "iface", "bus", "core", "vsync";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd SM8150_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml
new file mode 100644
index 000000000000..5182e958e069
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8150-mdss.yaml
@@ -0,0 +1,332 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8150-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SM8150 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sm8150-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nrt_bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8150-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8150-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-7nm
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8150.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8150.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8150-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+                        <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x800 0x420>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8150-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "iface", "bus", "core", "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd SM8150_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-171428571 {
+                    opp-hz = /bits/ 64 <171428571>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-345000000 {
+                    opp-hz = /bits/ 64 <345000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-460000000 {
+                    opp-hz = /bits/ 64 <460000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8150_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8150_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
new file mode 100644
index 000000000000..687c8c170cd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 Display DPU
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8250-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display ahb clock
+      - description: Display hf axi clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm8250-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "iface", "bus", "core", "vsync";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd SM8250_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
new file mode 100644
index 000000000000..368d3db0ce96
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml
@@ -0,0 +1,334 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
+  sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
+  bindings of MDSS are mentioned for SM8250 target.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8250-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nrt_bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8250-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8250-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-7nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8250-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
+                        <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x820 0x402>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8250-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "iface", "bus", "core", "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd SM8250_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-345000000 {
+                    opp-hz = /bits/ 64 <345000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-460000000 {
+                    opp-hz = /bits/ 64 <460000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8250_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm8250-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8250_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-7nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
new file mode 100644
index 000000000000..120500395c9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Display DPU
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8350-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display ahb clock
+      - description: Display lut clock
+      - description: Display core clock
+      - description: Display vsync clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: nrt_bus
+      - const: iface
+      - const: lut
+      - const: core
+      - const: vsync
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8350.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm8350-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus",
+                      "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd SM8350_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dpu_intf1_out: endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+        };
+
+        mdp_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                required-opps = <&rpmhpd_opp_low_svs>;
+            };
+
+            opp-300000000 {
+                opp-hz = /bits/ 64 <300000000>;
+                required-opps = <&rpmhpd_opp_svs>;
+            };
+
+            opp-345000000 {
+                opp-hz = /bits/ 64 <345000000>;
+                required-opps = <&rpmhpd_opp_svs_l1>;
+            };
+
+            opp-460000000 {
+                opp-hz = /bits/ 64 <460000000>;
+                required-opps = <&rpmhpd_opp_nom>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
new file mode 100644
index 000000000000..4d94dbff3054
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8350-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 Display MDSS
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description:
+  MSM Mobile Display Subsystem(MDSS) that encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,sm8350-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display hf axi clock
+      - description: Display sf axi clock
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+      - const: nrt_bus
+      - const: core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: mdp1-mem
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8350-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8350-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,dsi-phy-5nm-8350
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sm8350.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8350.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8350-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>,
+                        <&mmss_noc MASTER_MDP1 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        power-domains = <&dispcc MDSS_GDSC>;
+        resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        iommus = <&apps_smmu 0x820 0x402>;
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8350-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                     <&gcc GCC_DISP_SF_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd SM8350_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-345000000 {
+                    opp-hz = /bits/ 64 <345000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-460000000 {
+                    opp-hz = /bits/ 64 <460000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi0: dsi@ae94000 {
+            compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                      "byte_intf",
+                      "pixel",
+                      "core",
+                      "iface",
+                      "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                          <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>,
+                                 <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8350_MMCX>;
+
+            phys = <&mdss_dsi0_phy>;
+
+            ports {
+             #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
new file mode 100644
index 000000000000..0d17ece1c453
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 Display DPU
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8450-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display hf axi
+      - description: Display sf axi
+      - description: Display ahb
+      - description: Display lut
+      - description: Display core
+      - description: Display vsync
+
+  clock-names:
+    items:
+      - const: bus
+      - const: nrt_bus
+      - const: iface
+      - const: lut
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8450.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm8450-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                <&gcc GCC_DISP_SF_AXI_CLK>,
+                <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus",
+                      "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd SM8450_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dpu_intf1_out: endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dpu_intf2_out: endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+
+        mdp_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-172000000{
+                opp-hz = /bits/ 64 <172000000>;
+                required-opps = <&rpmhpd_opp_low_svs_d1>;
+            };
+
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                required-opps = <&rpmhpd_opp_low_svs>;
+            };
+
+            opp-325000000 {
+                opp-hz = /bits/ 64 <325000000>;
+                required-opps = <&rpmhpd_opp_svs>;
+            };
+
+            opp-375000000 {
+                opp-hz = /bits/ 64 <375000000>;
+                required-opps = <&rpmhpd_opp_svs_l1>;
+            };
+
+            opp-500000000 {
+                opp-hz = /bits/ 64 <500000000>;
+                required-opps = <&rpmhpd_opp_nom>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
new file mode 100644
index 000000000000..f26eb5643aed
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
@@ -0,0 +1,345 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 Display MDSS
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+description:
+  SM8450 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8450-mdss
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display sf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8450-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8450-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8450-dsi-phy-5nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8450-dispcc.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8450.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8450-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
+                        <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&gcc GCC_DISP_SF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x2800 0x402>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8450-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+                    <&gcc GCC_DISP_SF_AXI_CLK>,
+                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                    <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                    <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                    <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd SM8450_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-172000000{
+                    opp-hz = /bits/ 64 <172000000>;
+                    required-opps = <&rpmhpd_opp_low_svs_d1>;
+                };
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-500000000 {
+                    opp-hz = /bits/ 64 <500000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8450_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-160310000{
+                    opp-hz = /bits/ 64 <160310000>;
+                    required-opps = <&rpmhpd_opp_low_svs_d1>;
+                };
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sm8450-dsi-phy-5nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm8450-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8450_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,sm8450-dsi-phy-5nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96900 0x260>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
new file mode 100644
index 000000000000..ff58a747bb6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8550-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Display DPU
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+$ref: /schemas/display/msm/dpu-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8550-dpu
+
+  reg:
+    items:
+      - description: Address offset and size for mdp register set
+      - description: Address offset and size for vbif register set
+
+  reg-names:
+    items:
+      - const: mdp
+      - const: vbif
+
+  clocks:
+    items:
+      - description: Display AHB
+      - description: Display hf axi
+      - description: Display MDSS ahb
+      - description: Display lut
+      - description: Display core
+      - description: Display vsync
+
+  clock-names:
+    items:
+      - const: bus
+      - const: nrt_bus
+      - const: iface
+      - const: lut
+      - const: core
+      - const: vsync
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-controller@ae01000 {
+        compatible = "qcom,sm8550-dpu";
+        reg = <0x0ae01000 0x8f000>,
+              <0x0aeb0000 0x2008>;
+        reg-names = "mdp", "vbif";
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                <&gcc GCC_DISP_HF_AXI_CLK>,
+                <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        clock-names = "bus",
+                      "nrt_bus",
+                      "iface",
+                      "lut",
+                      "core",
+                      "vsync";
+
+        assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+        assigned-clock-rates = <19200000>;
+
+        operating-points-v2 = <&mdp_opp_table>;
+        power-domains = <&rpmhpd SM8550_MMCX>;
+
+        interrupt-parent = <&mdss>;
+        interrupts = <0>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dpu_intf1_out: endpoint {
+                    remote-endpoint = <&dsi0_in>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dpu_intf2_out: endpoint {
+                    remote-endpoint = <&dsi1_in>;
+                };
+            };
+        };
+
+        mdp_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                required-opps = <&rpmhpd_opp_low_svs>;
+            };
+
+            opp-325000000 {
+                opp-hz = /bits/ 64 <325000000>;
+                required-opps = <&rpmhpd_opp_svs>;
+            };
+
+            opp-375000000 {
+                opp-hz = /bits/ 64 <375000000>;
+                required-opps = <&rpmhpd_opp_svs_l1>;
+            };
+
+            opp-514000000 {
+                opp-hz = /bits/ 64 <514000000>;
+                required-opps = <&rpmhpd_opp_nom>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
new file mode 100644
index 000000000000..887be33ba108
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml
@@ -0,0 +1,333 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm8550-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 Display MDSS
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  SM8550 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like
+  DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sm8550-mdss
+
+  clocks:
+    items:
+      - description: Display MDSS AHB
+      - description: Display AHB
+      - description: Display hf AXI
+      - description: Display core
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8550-dpu
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: qcom,sm8550-dsi-ctrl
+          - const: qcom,mdss-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        const: qcom,sm8550-dsi-phy-4nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-dispcc.h>
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sm8550-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+
+        interconnects = <&mmss_noc MASTER_MDP 0 &gem_noc SLAVE_LLCC 0>,
+                        <&mc_virt MASTER_LLCC 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                 <&gcc GCC_DISP_AHB_CLK>,
+                 <&gcc GCC_DISP_HF_AXI_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "bus", "nrt_bus", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        iommus = <&apps_smmu 0x1c00 0x2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sm8550-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AHB_CLK>,
+                    <&gcc GCC_DISP_HF_AXI_CLK>,
+                    <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                    <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+                    <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                    <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "bus",
+                          "nrt_bus",
+                          "iface",
+                          "lut",
+                          "core",
+                          "vsync";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            assigned-clock-rates = <19200000>;
+
+            operating-points-v2 = <&mdp_opp_table>;
+            power-domains = <&rpmhpd SM8550_MMCX>;
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&dsi1_in>;
+                    };
+                };
+            };
+
+            mdp_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-200000000 {
+                    opp-hz = /bits/ 64 <200000000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-325000000 {
+                    opp-hz = /bits/ 64 <325000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-375000000 {
+                    opp-hz = /bits/ 64 <375000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+
+                opp-514000000 {
+                    opp-hz = /bits/ 64 <514000000>;
+                    required-opps = <&rpmhpd_opp_nom>;
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8550_MMCX>;
+
+            phys = <&dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi0_out: endpoint {
+                    };
+                };
+            };
+
+            dsi_opp_table: opp-table {
+                compatible = "operating-points-v2";
+
+                opp-187500000 {
+                    opp-hz = /bits/ 64 <187500000>;
+                    required-opps = <&rpmhpd_opp_low_svs>;
+                };
+
+                opp-300000000 {
+                    opp-hz = /bits/ 64 <300000000>;
+                    required-opps = <&rpmhpd_opp_svs>;
+                };
+
+                opp-358000000 {
+                    opp-hz = /bits/ 64 <358000000>;
+                    required-opps = <&rpmhpd_opp_svs_l1>;
+                };
+            };
+        };
+
+        dsi0_phy: phy@ae94400 {
+            compatible = "qcom,sm8550-dsi-phy-4nm";
+            reg = <0x0ae95000 0x200>,
+                  <0x0ae95200 0x280>,
+                  <0x0ae95500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&gcc GCC_DISP_HF_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SM8550_MMCX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        dsi1_phy: phy@ae96400 {
+            compatible = "qcom,sm8550-dsi-phy-4nm";
+            reg = <0x0ae97000 0x200>,
+                  <0x0ae97200 0x280>,
+                  <0x0ae97500 0x400>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
index a108029ecfab..acd2f3faa6b9 100644
--- a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
+++ b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Asia Better Technology 3.0" (320x480 pixels) 24-bit IPS LCD panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
index 93878c2cd370..f6fea9085aab 100644
--- a/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
+++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
@@ -11,13 +11,23 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: advantech,idk-1110wr
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: advantech,idk-1110wr
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   data-mapping:
     const: jeida-24
@@ -35,6 +45,11 @@ additionalProperties: false
 
 required:
   - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml b/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml
new file mode 100644
index 000000000000..4ad484f09ba3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/arm,rtsm-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm RTSM Virtual Platforms Display
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: arm,rtsm-display
+
+  port: true
+
+required:
+  - compatible
+  - port
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
index be69e0cc50fc..c9958f824d9a 100644
--- a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
+++ b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml
@@ -37,9 +37,6 @@ examples:
         compatible = "arm,versatile-sysreg", "syscon", "simple-mfd";
         reg = <0x00000 0x1000>;
 
-        #address-cells = <1>;
-        #size-cells = <0>;
-
         panel {
             compatible = "arm,versatile-tft-panel";
 
diff --git a/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
new file mode 100644
index 000000000000..86c834eb4d98
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD panel
+
+description: |
+  Delta RGB 8-bit panel found in some Retrogame handhelds
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+  - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: auo,a030jtn01
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "auo,a030jtn01";
+            reg = <0>;
+
+            spi-max-frequency = <10000000>;
+
+            reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;
+            power-supply = <&lcd_power>;
+
+            backlight = <&backlight>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml
new file mode 100644
index 000000000000..a8f3afa922c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,bf060y8m-aj0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE BF060Y8M-AJ0 5.99" 1080x2160 AMOLED Panel
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  This is a 5.99" 1080x2160 16.7M Color active matrix AMOLED
+  video mode panel module on MIPI-DSI 4-Lane interface, GGRB
+  pixel arrangement, 63 micrometers pitch, with an active
+  area of 68.04 x 136.08 millimeters.
+  Each pixel is divided into red and green dots, or blue and
+  green dots, and two pixels share red or blue dots which are
+  arranged in vertical stripe.
+  The DriverIC for this panel module is SW43404.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: boe,bf060y8m-aj0
+
+  elvdd-supply:
+    description: EL Driving positive (VDD) supply (4.40-4.80V)
+  elvss-supply:
+    description: EL Driving negative (VSS) supply (-5.00V to -1.40V)
+  vcc-supply:
+    description: Core (TSP) voltage supply (2.70-3.60V)
+  vci-supply:
+    description: DriverIC Operation supply (2.60-3.60V)
+  vddio-supply:
+    description: I/O voltage supply (1.62-1.98V)
+
+  port: true
+  reg: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - elvdd-supply
+  - elvss-supply
+  - vcc-supply
+  - vci-supply
+  - vddio-supply
+  - reg
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,bf060y8m-aj0";
+            reg = <0>;
+
+            reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+            vcc-supply = <&disp_vcc_vreg>;
+            vddio-supply = <&disp_vddio_vreg>;
+            vci-supply = <&disp_vci_vreg>;
+            elvdd-supply = <&disp_elvdd_vreg>;
+            elvss-supply = <&disp_elvss_vreg>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
index b87a2e28c866..aed55608ebf6 100644
--- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -26,6 +26,12 @@ properties:
       - auo,b101uan08.3
         # BOE TV105WUM-NW0 10.5" WUXGA TFT LCD panel
       - boe,tv105wum-nw0
+        # BOE TV110C9M-LL3 10.95" WUXGA TFT LCD panel
+      - boe,tv110c9m-ll3
+        # INX HJ110IZ-01A 10.95" WUXGA TFT LCD panel
+      - innolux,hj110iz-01a
+        # STARRY 2081101QFH032011-53G 10.1" WUXGA TFT LCD panel
+      - starry,2081101qfh032011-53g
 
   reg:
     description: the virtual channel number of a DSI peripheral
@@ -36,6 +42,9 @@ properties:
   pp1800-supply:
     description: core voltage supply
 
+  pp3300-supply:
+    description: core voltage supply
+
   avdd-supply:
     description: phandle of the regulator that provides positive voltage
 
@@ -46,6 +55,7 @@ properties:
     description: phandle of the backlight device attached to the panel
 
   port: true
+  rotation: true
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/panel/display-timings.yaml b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
index 56903ded005e..dc5f7e36e30b 100644
--- a/Documentation/devicetree/bindings/display/panel/display-timings.yaml
+++ b/Documentation/devicetree/bindings/display/panel/display-timings.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/display-timings.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: display timings bindings
+title: display timings
 
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
@@ -31,8 +31,7 @@ properties:
 patternProperties:
   "^timing":
     type: object
-    allOf:
-      - $ref: panel-timing.yaml#
+    $ref: panel-timing.yaml#
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml b/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml
new file mode 100644
index 000000000000..80deedc01c7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ebbg,ft8719.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EBBG FT8719 MIPI-DSI LCD panel
+
+maintainers:
+  - Joel Selvaraj <jo@jsfamily.in>
+
+description: |
+  The FT8719 panel from EBBG is a FHD+ LCD display panel with a resolution
+  of 1080x2246. It is a video mode DSI panel. The backlight is managed
+  through the QCOM WLED driver.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: ebbg,ft8719
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel of the peripheral
+
+  vddio-supply:
+    description: power IC supply regulator
+
+  vddpos-supply:
+    description: positive boost supply regulator
+
+  vddneg-supply:
+    description: negative boost supply regulator
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vddpos-supply
+  - vddneg-supply
+  - reset-gpios
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      panel@0 {
+        compatible = "ebbg,ft8719";
+        reg = <0>;
+
+        vddio-supply = <&vreg_l14a_1p88>;
+        vddpos-supply = <&lab>;
+        vddneg-supply = <&ibb>;
+
+        reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+        backlight = <&pmi8998_wled>;
+
+        port {
+          ebbg_ft8719_in_0: endpoint {
+            remote-endpoint = <&dsi0_out>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
index 7adb83e2e8d9..265ab6d30572 100644
--- a/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
+++ b/Documentation/devicetree/bindings/display/panel/elida,kd35t133.yaml
@@ -17,7 +17,9 @@ properties:
     const: elida,kd35t133
   reg: true
   backlight: true
+  port: true
   reset-gpios: true
+  rotation: true
   iovcc-supply:
     description: regulator that supplies the iovcc voltage
   vdd-supply:
@@ -27,6 +29,7 @@ required:
   - compatible
   - reg
   - backlight
+  - port
   - iovcc-supply
   - vdd-supply
 
@@ -43,6 +46,12 @@ examples:
             backlight = <&backlight>;
             iovcc-supply = <&vcc_1v8>;
             vdd-supply = <&vcc3v3_lcd>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
         };
     };
 
diff --git a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
index 95acf9e96f1c..92df69e80a82 100644
--- a/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
+++ b/Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.yaml
@@ -26,6 +26,7 @@ properties:
   dvdd-supply:
     description: 3v3 digital regulator
 
+  port: true
   reset-gpios: true
 
   backlight: true
@@ -35,7 +36,7 @@ required:
   - reg
   - avdd-supply
   - dvdd-supply
-  - reset-gpios
+  - port
 
 additionalProperties: false
 
@@ -54,5 +55,11 @@ examples:
             dvdd-supply = <&reg_dldo2>;
             reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
             backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml b/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml
new file mode 100644
index 000000000000..d54e96b2a9e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/focaltech,gpt3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Focaltech GPT3 3.0" (640x480 pixels) IPS LCD panel
+
+maintainers:
+  - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: focaltech,gpt3
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "focaltech,gpt3";
+            reg = <0>;
+
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
new file mode 100644
index 000000000000..1b2a1baa26f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/himax,hx8394.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/himax,hx8394.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HX8394 MIPI-DSI LCD panel controller
+
+maintainers:
+  - Ondrej Jirman <megi@xff.cz>
+  - Javier Martinez Canillas <javierm@redhat.com>
+
+description:
+  Device tree bindings for panels based on the Himax HX8394 controller,
+  such as the HannStar HSD060BHW4 720x1440 TFT LCD panel connected with
+  a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - hannstar,hsd060bhw4
+      - const: himax,hx8394
+
+  reg: true
+
+  reset-gpios: true
+
+  backlight: true
+
+  port: true
+
+  vcc-supply:
+    description: Panel power supply
+
+  iovcc-supply:
+    description: I/O voltage supply
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - backlight
+  - port
+  - vcc-supply
+  - iovcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "hannstar,hsd060bhw4", "himax,hx8394";
+            reg = <0>;
+            vcc-supply = <&reg_2v8_p>;
+            iovcc-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml
new file mode 100644
index 000000000000..90e323e19edb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ilitek,ili9163.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ilitek ILI9163 display panels
+
+maintainers:
+  - Daniel Mack <daniel@zonque.org>
+
+description:
+  This binding is for display panels using an Ilitek ILI9163 controller in SPI
+  mode.
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - newhaven,1.8-128160EF
+      - const: ilitek,ili9163
+
+  spi-max-frequency:
+    maximum: 32000000
+
+  dc-gpios:
+    maxItems: 1
+    description: Display data/command selection (D/CX)
+
+  backlight: true
+  reg: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - dc-gpios
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight: backlight {
+            compatible = "gpio-backlight";
+            gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+    };
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            display@0 {
+                    compatible = "newhaven,1.8-128160EF", "ilitek,ili9163";
+                    reg = <0>;
+                    spi-max-frequency = <32000000>;
+                    dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+                    rotation = <180>;
+                    backlight = <&backlight>;
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
index e89c1ea62ffa..7d221ef35443 100644
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml
@@ -15,11 +15,9 @@ description: |
   960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
   VCOMH outputs.
 
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
index 20ce88ab4b3a..94f169ea065a 100644
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
@@ -16,13 +16,16 @@ description: |
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     items:
       - enum:
+          - adafruit,yx240qv29
           # ili9341 240*320 Color on stm32f429-disco board
           - st,sf-tc240t-9370-t
+          - canaan,kd233-tft
       - const: ilitek,ili9341
 
   reg: true
@@ -47,32 +50,50 @@ properties:
   vddi-led-supply:
     description: Voltage supply for the LED driver (1.65 .. 3.3 V)
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
   - reg
   - dc-gpios
-  - port
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,sf-tc240t-9370-t
+then:
+  required:
+    - port
 
 examples:
   - |+
+    #include <dt-bindings/gpio/gpio.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
         panel: display@0 {
-                 compatible = "st,sf-tc240t-9370-t",
-                              "ilitek,ili9341";
-                 reg = <0>;
-                 spi-3wire;
-                 spi-max-frequency = <10000000>;
-                 dc-gpios = <&gpiod 13 0>;
-                 port {
-                         panel_in: endpoint {
-                           remote-endpoint = <&display_out>;
-                      };
-                 };
-             };
+            compatible = "st,sf-tc240t-9370-t",
+                         "ilitek,ili9341";
+            reg = <0>;
+            spi-3wire;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpiod 13 0>;
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
         };
+        display@1{
+            compatible = "adafruit,yx240qv29", "ilitek,ili9341";
+            reg = <1>;
+            spi-max-frequency = <10000000>;
+            dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+            rotation = <270>;
+            backlight = <&backlight>;
+        };
+    };
 ...
-
diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
index b2fcec4f22fd..c5d1df680858 100644
--- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml
@@ -9,24 +9,28 @@ title: Ilitek ILI9881c based MIPI-DSI panels
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
 
+allOf:
+  - $ref: panel-common.yaml#
+
 properties:
   compatible:
     items:
       - enum:
           - bananapi,lhr050h41
           - feixin,k101-im2byl02
+          - wanchanglong,w552946aba
       - const: ilitek,ili9881c
 
   backlight: true
   power-supply: true
   reg: true
   reset-gpios: true
+  rotation: true
 
 required:
   - compatible
   - power-supply
   - reg
-  - reset-gpios
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
index a69681e724cb..ab6b7be88341 100644
--- a/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
+++ b/Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
@@ -11,15 +11,26 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: innolux,ee101ia-01d
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: innolux,ee101ia-01d
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   backlight: true
+  data-mapping: true
   enable-gpios: true
   power-supply: true
   width-mm: true
@@ -27,5 +38,13 @@ properties:
   panel-timing: true
   port: true
 
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
 additionalProperties: false
 ...
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
index cda36c04e85c..72788e3e6c59 100644
--- a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
+++ b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Innolux EJ030NA 3.0" (320x480 pixels) 24-bit TFT LCD panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml
deleted file mode 100644
index 243dac2416f3..000000000000
--- a/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.yaml
+++ /dev/null
@@ -1,43 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/panel/innolux,p120zdg-bf1.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
-
-maintainers:
-  - Sandeep Panda <spanda@codeaurora.org>
-  - Douglas Anderson <dianders@chromium.org>
-
-allOf:
-  - $ref: panel-common.yaml#
-
-properties:
-  compatible:
-    const: innolux,p120zdg-bf1
-
-  enable-gpios: true
-  power-supply: true
-  backlight: true
-  no-hpd: true
-
-required:
-  - compatible
-  - power-supply
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/gpio/gpio.h>
-
-    panel_edp: panel-edp {
-        compatible = "innolux,p120zdg-bf1";
-        enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>;
-        power-supply = <&pm8916_l2>;
-        backlight = <&backlight>;
-        no-hpd;
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml
new file mode 100644
index 000000000000..41eb7fbf7715
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jadard,jd9365da-h3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Jadard JD9365DA-HE WXGA DSI panel
+
+maintainers:
+  - Jagan Teki <jagan@edgeble.ai>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - chongzhou,cz101b4001
+          - radxa,display-10hd-ad001
+          - radxa,display-8hd-ad002
+      - const: jadard,jd9365da-h3
+
+  reg: true
+
+  vdd-supply:
+    description: supply regulator for VDD, usually 3.3V
+
+  vccio-supply:
+    description: supply regulator for VCCIO, usually 1.8V
+
+  reset-gpios: true
+
+  backlight: true
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vccio-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "chongzhou,cz101b4001", "jadard,jd9365da-h3";
+            reg = <0>;
+            vdd-supply = <&lcd_3v3>;
+            vccio-supply = <&vcca_1v8>;
+            reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+            backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
index 4f92365e888a..63c82a4378ff 100644
--- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
@@ -35,6 +35,8 @@ properties:
       phandle of the gpio for power ic line
       Power IC supply enable, High active
 
+  port: true
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
index c45c92a3d41f..b4be9bd8ddde 100644
--- a/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
+++ b/Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: King Display KD035G6-54NT 3.5" (320x240 pixels) 24-bit TFT LCD panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -26,6 +23,8 @@ properties:
   reg: true
   reset-gpios: true
 
+  spi-3wire: true
+
 required:
   - compatible
   - power-supply
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
new file mode 100644
index 000000000000..ebdca5f5a001
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+  - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: leadtek,ltk035c5444t
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "leadtek,ltk035c5444t";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
index 3715882b63b6..3f6efbb942da 100644
--- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk050h3146w.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Leadtek LTK050H3146W 5.0in 720x1280 DSI panel
 
 maintainers:
-  - Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
+  - Quentin Schulz <quentin.schulz@theobroma-systems.com>
 
 allOf:
   - $ref: panel-common.yaml#
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
index b4314ce7b411..ee357e139ac0 100644
--- a/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
+++ b/Documentation/devicetree/bindings/display/panel/lg,lg4573.yaml
@@ -15,13 +15,13 @@ maintainers:
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
     const: lg,lg4573
 
   reg: true
-  spi-max-frequency: true
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
index 830e335ddb53..628c4b898111 100644
--- a/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
+++ b/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: LG.Philips LB035Q02 Panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Tomi Valkeinen <tomi.valkeinen@ti.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -24,6 +21,9 @@ properties:
   enable-gpios: true
   port: true
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - enable-gpios
diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
index b5e7ee230fa6..3623ffa6518d 100644
--- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
+++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
@@ -11,13 +11,23 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: mitsubishi,aa104xd12
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: mitsubishi,aa104xd12
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   vcc-supply:
     description: Reference to the regulator powering the panel VCC pins.
@@ -39,6 +49,11 @@ additionalProperties: false
 required:
   - compatible
   - vcc-supply
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
index 977c50a85b67..37f01d847aac 100644
--- a/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
@@ -11,13 +11,23 @@ maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: mitsubishi,aa121td01
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: mitsubishi,aa121td01
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   vcc-supply:
     description: Reference to the regulator powering the panel VCC pins.
@@ -39,6 +49,11 @@ additionalProperties: false
 required:
   - compatible
   - vcc-supply
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
index aa788eaa2f71..accf933d6e46 100644
--- a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
+++ b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
@@ -15,6 +15,7 @@ maintainers:
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -34,13 +35,13 @@ required:
   - reset-gpios
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    spi0 {
+    spi {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml
new file mode 100644
index 000000000000..116c1b6030a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/newvision,nv3051d.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/newvision,nv3051d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NewVision NV3051D based LCD panel
+
+description: |
+  The NewVision NV3051D is a driver chip used to drive DSI panels. For now,
+  this driver only supports the 640x480 panels found in the Anbernic RG353
+  based devices.
+
+maintainers:
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - anbernic,rg353p-panel
+          - anbernic,rg353v-panel
+      - const: newvision,nv3051d
+
+  reg: true
+  backlight: true
+  port: true
+  reset-gpios:
+    description: Active low reset GPIO
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - backlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "anbernic,rg353p-panel", "newvision,nv3051d";
+            reg = <0>;
+            backlight = <&backlight>;
+            reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc3v3_lcd>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml
new file mode 100644
index 000000000000..377a05d48a02
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt35950.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT35950-based display panels
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
+
+description: |
+  The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels,
+  with Static RAM for content retention in command mode and also supports
+  video mode with VESA Frame Buffer Compression or Display Stream Compression
+  on single, or dual dsi port(s).
+  This DDIC is also capable of upscaling an input image to the panel's native
+  resolution, for example it can upscale a 1920x1080 input to 3840x2160 with
+  either bilinear interpolation or pixel duplication.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sharp,ls055d1sx04
+      - const: novatek,nt35950
+    description: This indicates the panel manufacturer of the panel
+      that is in turn using the NT35950 panel driver. The compatible
+      string determines how the NT35950 panel driver shall be configured
+      to work with the indicated panel. The novatek,nt35950 compatible shall
+      always be provided as a fallback.
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be 8mA, gpio
+      can be configured using mux, pinctrl, pinctrl-names (active high)
+
+  avdd-supply:
+    description: positive boost supply regulator
+  avee-supply:
+    description: negative boost supply regulator
+  dvdd-supply:
+    description: regulator that supplies the digital voltage
+  vddio-supply:
+    description: regulator that supplies the I/O voltage
+
+  backlight: true
+  ports: true
+  reg: true
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - avdd-supply
+  - avee-supply
+  - dvdd-supply
+  - vddio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls055d1sx04", "novatek,nt35950";
+            reg = <0>;
+
+            backlight = <&pmi8998_wled>;
+            reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
+
+            avdd-supply = <&lab>;
+            avee-supply = <&ibb>;
+            dvdd-supply = <&disp_dvdd_vreg>;
+            vddio-supply = <&vreg_l14a_1p85>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in0: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    panel_in1: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
new file mode 100644
index 000000000000..0039561ef04c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36523.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/novatek,nt36523.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT36523 based DSI display Panels
+
+maintainers:
+  - Jianhua Lu <lujianhua000@gmail.com>
+
+description: |
+  The Novatek NT36523 is a generic DSI Panel IC used to drive dsi
+  panels. Support video mode panels from China Star Optoelectronics
+  Technology (CSOT) and BOE Technology.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - xiaomi,elish-boe-nt36523
+          - xiaomi,elish-csot-nt36523
+      - const: novatek,nt36523
+
+  reset-gpios:
+    maxItems: 1
+    description: phandle of gpio for reset line - This should be 8mA
+
+  vddio-supply:
+    description: regulator that supplies the I/O voltage
+
+  reg: true
+  ports: true
+  backlight: true
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - reset-gpios
+  - ports
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "xiaomi,elish-csot-nt36523", "novatek,nt36523";
+            reg = <0>;
+
+            vddio-supply = <&vreg_l14a_1p88>;
+            reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    panel_in_0: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1{
+                    reg = <1>;
+                    panel_in_1: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
index ef4c0a24512d..ae821f465e1c 100644
--- a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
+++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml
@@ -46,11 +46,12 @@ properties:
 
   reg: true
   port: true
+  backlight: true
 
 required:
   - compatible
   - reg
-  - vddi0-supply
+  - vddio-supply
   - vddpos-supply
   - vddneg-supply
   - reset-gpios
@@ -69,14 +70,13 @@ examples:
         panel@0 {
             compatible = "tianma,fhd-video", "novatek,nt36672a";
             reg = <0>;
-            vddi0-supply = <&vreg_l14a_1p88>;
+            vddio-supply = <&vreg_l14a_1p88>;
             vddpos-supply = <&lab>;
             vddneg-supply = <&ibb>;
 
+            backlight = <&pmi8998_wled>;
             reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
 
-            #address-cells = <1>;
-            #size-cells = <0>;
             port {
                 tianma_nt36672a_in_0: endpoint {
                     remote-endpoint = <&dsi0_out>;
diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
index 2329d9610f83..9f97598efdfa 100644
--- a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
+++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/olimex,lcd-olinuxino.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for Olimex Ltd. LCD-OLinuXino bridge panel.
+title: Olimex Ltd. LCD-OLinuXino bridge panel.
 
 maintainers:
   - Stefan Mavrodiev <stefan@olimex.com>
diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
index 4b6dda6dbc0f..ad7d3575190e 100644
--- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
 
 maintainers:
-  - Philippe CORNU <philippe.cornu@st.com>
+  - Philippe CORNU <philippe.cornu@foss.st.com>
 
 description: |
              The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
@@ -50,4 +50,3 @@ examples:
       };
     };
 ...
-
diff --git a/Documentation/devicetree/bindings/display/panel/panel-edp.yaml b/Documentation/devicetree/bindings/display/panel/panel-edp.yaml
new file mode 100644
index 000000000000..bb0cf6827e79
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-edp.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-edp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Probeable (via DP AUX / EDID) eDP Panels with simple poweron sequences
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description: |
+  This binding file can be used to indicate that an eDP panel is connected
+  to a Embedded DisplayPort AUX bus (see display/dp-aux-bus.yaml) without
+  actually specifying exactly what panel is connected. This is useful for
+  the case that more than one different panel could be connected to the
+  board, either for second-sourcing purposes or to support multiple SKUs
+  with different LCDs that hook up to a common board.
+
+  As per above, a requirement for using this binding is that the panel is
+  represented under the DP AUX bus. This means that we can use any
+  information provided by the DP AUX bus (including the EDID) to identify
+  the panel. We can use this to identify display size, resolution, and
+  timings among other things.
+
+  One piece of information about eDP panels that is typically _not_
+  provided anywhere on the DP AUX bus is the power sequencing timings.
+  This is the reason why, historically, we've always had to explicitly
+  list eDP panels. We solve that here with two tricks. The "worst case"
+  power on timings for any panels expected to be connected to a board are
+  specified in these bindings. Once we've powered on, it's expected that
+  the operating system will lookup the panel in a table (based on EDID
+  information) to figure out other power sequencing timings.
+
+  eDP panels in general can have somewhat arbitrary power sequencing
+  requirements. However, even though it's arbitrary in general, the
+  vast majority of panel datasheets have a power sequence diagram that
+  looks the exactly the same as every other panel. Each panel datasheet
+  cares about different timings in this diagram but the fact that the
+  diagram is so similar means we can come up with a single driver to
+  handle it.
+
+  These diagrams all look roughly like this, sometimes labeled with
+  slightly different numbers / lines but all pretty much the same
+  sequence. This is because much of this diagram comes straight from
+  the eDP Standard.
+
+                __________________________________________________
+  Vdd       ___/:                                                :\____       /
+          _/    :                                                :     \_____/
+           :<T1>:<T2>:                                 :<--T10-->:<T11>:<T12>:
+                :    +-----------------------+---------+---------+
+  eDP     -----------+ Black video           | Src vid | Blk vid +
+  Display       :    +-----------------------+---------+---------+
+                :     _______________________:_________:_________:
+  HPD           :<T3>|                       :         :         |
+          ___________|                       :         :         |_____________
+                     :                       :         :         :
+  Sink               +-----------------------:---------:---------+
+  AUX CH  -----------+ AUX Ch operational    :         :         +-------------
+                     +-----------------------:---------:---------+
+                     :                       :         :         :
+                     :<T4>:             :<T7>:         :         :
+  Src main                +------+------+--------------+---------+
+  lnk data----------------+LnkTrn| Idle |Valid vid data| Idle/off+-------------
+                          +------+------+--------------+---------+
+                          : <T5> :<-T6->:<-T8->:       :
+                                               :__:<T9>:
+  LED_EN                                       |  |
+          _____________________________________|  |____________________________
+                                               :  :
+                                     __________:__:_
+  PWM                               |          :  : |
+          __________________________|          :  : |__________________________
+                                    :          :  : :
+                       _____________:__________:__:_:______
+  Bklight         ____/:            :          :  : :     :\____
+  power   _______/     :<---T13---->:          :  : :<T16>:     \______________
+  (Vbl)          :<T17>:<---------T14--------->:  :<-T15->:<T18>:
+
+  The above looks fairly complex but, as per above, each panel only cares
+  about a subset of those timings.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: edp-panel
+
+  hpd-reliable-delay-ms:
+    description:
+      A fixed amount of time that must be waited after powering on the
+      panel's power-supply before the HPD signal is a reliable way to know
+      when the AUX channel is ready. This is useful for panels that glitch
+      the HPD at the start of power-on. This value is not needed if HPD is
+      always reliable for all panels that might be connected.
+
+  hpd-absent-delay-ms:
+    description:
+      The panel specifies that HPD will be asserted this many milliseconds
+      from power on (timing T3 in the diagram above). If we have no way to
+      measure HPD then a fixed delay of this many milliseconds can be used.
+      This can also be used as a timeout when waiting for HPD. Does not
+      include the hpd-reliable-delay, so if hpd-reliable-delay was 80 ms
+      and hpd-absent-delay was 200 ms then we'd do a fixed 80 ms delay and
+      then we know HPD would assert in the next 120 ms. This value is not
+      needed if HPD hooked up, either through a GPIO in the panel node or
+      hooked up directly to the eDP controller.
+
+  backlight: true
+  enable-gpios: true
+  port: true
+  power-supply: true
+  no-hpd: true
+  hpd-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - power-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@2d {
+        compatible = "ti,sn65dsi86";
+        reg = <0x2d>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+        enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+        vpll-supply = <&src_pp1800_s4a>;
+        vccio-supply = <&src_pp1800_s4a>;
+        vcca-supply = <&src_pp1200_l2a>;
+        vcc-supply = <&src_pp1200_l2a>;
+
+        clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+        clock-names = "refclk";
+
+        no-hpd;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            endpoint {
+              remote-endpoint = <&dsi0_out>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            sn65dsi86_out: endpoint {
+              remote-endpoint = <&panel_in_edp>;
+            };
+          };
+        };
+
+        aux-bus {
+          panel {
+            compatible = "edp-panel";
+            power-supply = <&pp3300_dx_edp>;
+            backlight = <&backlight>;
+            hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
+            hpd-reliable-delay-ms = <15>;
+
+            port {
+              panel_in_edp: endpoint {
+                remote-endpoint = <&sn65dsi86_out>;
+              };
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
new file mode 100644
index 000000000000..929fe046d1e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic LVDS Display Panel
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: panel-lvds
+
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - advantech,idk-1110wr
+            - advantech,idk-2121wr
+            - innolux,ee101ia-01d
+            - mitsubishi,aa104xd12
+            - mitsubishi,aa121td01
+            - sgd,gktw70sdae4se
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - auo,b101ew05
+          - tbs,a711-panel
+
+      - const: panel-lvds
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
+  - port
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
new file mode 100644
index 000000000000..9b701df5e9d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-mipi-dbi-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI DBI SPI Panel
+
+maintainers:
+  - Noralf Trønnes <noralf@tronnes.org>
+
+description: |
+  This binding is for display panels using a MIPI DBI compatible controller
+  in SPI mode.
+
+  The MIPI Alliance Standard for Display Bus Interface defines the electrical
+  and logical interfaces for display controllers historically used in mobile
+  phones. The standard defines 4 display architecture types and this binding is
+  for type 1 which has full frame memory. There are 3 interface types in the
+  standard and type C is the serial interface.
+
+  The standard defines the following interface signals for type C:
+  - Power:
+    - Vdd: Power supply for display module
+      Called power-supply in this binding.
+    - Vddi: Logic level supply for interface signals
+      Called io-supply in this binding.
+  - Interface:
+    - CSx: Chip select
+    - SCL: Serial clock
+    - Dout: Serial out
+    - Din: Serial in
+    - SDA: Bidrectional in/out
+    - D/CX: Data/command selection, high=data, low=command
+      Called dc-gpios in this binding.
+    - RESX: Reset when low
+      Called reset-gpios in this binding.
+
+  The type C interface has 3 options:
+
+    - Option 1: 9-bit mode and D/CX as the 9th bit
+      |              Command              |  the next command or following data  |
+      |<0><D7><D6><D5><D4><D3><D2><D1><D0>|<D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+    - Option 2: 16-bit mode and D/CX as a 9th bit
+      |              Command or data                              |
+      |<X><X><X><X><X><X><X><D/CX><D7><D6><D5><D4><D3><D2><D1><D0>|
+
+    - Option 3: 8-bit mode and D/CX as a separate interface line
+      |        Command or data         |
+      |<D7><D6><D5><D4><D3><D2><D1><D0>|
+
+  The panel resolution is specified using the panel-timing node properties
+  hactive (width) and vactive (height). The other mandatory panel-timing
+  properties should be set to zero except clock-frequency which can be
+  optionally set to inform about the actual pixel clock frequency.
+
+  If the panel is wired to the controller at an offset specify this using
+  hback-porch (x-offset) and vback-porch (y-offset).
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - sainsmart18
+      - const: panel-mipi-dbi-spi
+
+  write-only:
+    type: boolean
+    description:
+      Controller is not readable (ie. Din (MISO on the SPI interface) is not
+      wired up).
+
+  dc-gpios:
+    maxItems: 1
+    description: |
+      Controller data/command selection (D/CX) in 4-line SPI mode.
+      If not set, the controller is in 3-line SPI mode.
+
+  io-supply:
+    description: |
+      Logic level supply for interface signals (Vddi).
+      No need to set if this is the same as power-supply.
+
+required:
+  - compatible
+  - reg
+  - width-mm
+  - height-mm
+  - panel-timing
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        display@0{
+            compatible = "sainsmart18", "panel-mipi-dbi-spi";
+            reg = <0>;
+            spi-max-frequency = <40000000>;
+
+            dc-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+            write-only;
+
+            backlight = <&backlight>;
+
+            width-mm = <35>;
+            height-mm = <28>;
+
+            panel-timing {
+                hactive = <160>;
+                vactive = <128>;
+                hback-porch = <0>;
+                vback-porch = <0>;
+                clock-frequency = <0>;
+                hfront-porch = <0>;
+                hsync-len = <0>;
+                vfront-porch = <0>;
+                vsync-len = <0>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
index fbd71669248f..90c04cff8281 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
@@ -19,9 +19,6 @@ description: |
 
   If the panel is more advanced a dedicated binding file is required.
 
-allOf:
-  - $ref: panel-common.yaml#
-
 properties:
 
   compatible:
@@ -35,6 +32,8 @@ properties:
       - boe,tv080wum-nl0
         # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
       - innolux,p079zca
+        # JDI FHD_R63452 1080x1920 5.2" IPS LCD Panel
+      - jdi,fhd-r63452
         # Khadas TS050 5" 1080x1920 LCD panel
       - khadas,ts050
         # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel
@@ -65,12 +64,31 @@ properties:
   reset-gpios: true
   port: true
   power-supply: true
+  vddio-supply: true
+
+allOf:
+  - $ref: panel-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - samsung,s6e3fc2x01
+            - samsung,sofef00
+    then:
+      properties:
+        power-supply: false
+      required:
+        - vddio-supply
+    else:
+      properties:
+        vddio-supply: false
+      required:
+        - power-supply
 
 additionalProperties: false
 
 required:
   - compatible
-  - power-supply
   - reg
 
 examples:
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 335776c45474..01560fe226dd 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -35,6 +35,8 @@ properties:
       - ampire,am-480272h3tmqw-t01h
         # Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
       - ampire,am800480r3tmqwa1h
+        # Ampire AM-800600P5TMQW-TB8H 8.0" SVGA TFT LCD panel
+      - ampire,am800600p5tmqw-tb8h
         # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
       - auo,b101aw03
         # AU Optronics Corporation 10.1" WSVGA TFT LCD panel
@@ -105,6 +107,10 @@ properties:
       - chunghwa,claa101wb01
         # Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
       - chunghwa,claa101wb03
+        # DataImage, Inc. 4.3" WQVGA (480x272) TFT LCD panel with 24-bit parallel interface.
+      - dataimage,fg040346dsswbg04
+        # DataImage, Inc. 10.1" WXGA (1280×800) TFT LCD panel
+      - dataimage,fg1001l0dsswmg01
         # DataImage, Inc. 7" WVGA (800x480) TFT LCD panel with 24-bit parallel interface.
       - dataimage,scf0700c48ggu18
         # DLC Display Co. DLC1010GIG 10.1" WXGA TFT LCD Panel
@@ -135,6 +141,8 @@ properties:
         # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
       - edt,etm0700g0dh6
       - edt,etm0700g0edh6
+        # Emerging Display Technology Corp. LVDS WSVGA TFT Display with capacitive touch
+      - edt,etml0700y5dha
         # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
         # capacitive touch
       - edt,etmv570g2dhu
@@ -156,6 +164,8 @@ properties:
       - hannstar,hsd070pww1
         # HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel
       - hannstar,hsd100pxn1
+        # HannStar Display Corp. HSD101PWW2 10.1" WXGA (1280x800) LVDS panel
+      - hannstar,hsd101pww2
         # Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
       - hit,tx23d38vm0caa
         # InfoVision Optoelectronics M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel
@@ -166,6 +176,8 @@ properties:
       - innolux,at070tn92
         # Innolux G070Y2-L01 7" WVGA (800x480) TFT LCD panel
       - innolux,g070y2-l01
+        # Innolux G070Y2-T02 7" WVGA (800x480) TFT LCD TTL panel
+      - innolux,g070y2-t02
         # Innolux Corporation 10.1" G101ICE-L01 WXGA (1280x800) LVDS panel
       - innolux,g101ice-l01
         # Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel
@@ -180,6 +192,8 @@ properties:
       - innolux,n125hce-gn1
         # InnoLux 15.6" WXGA TFT LCD panel
       - innolux,n156bge-l21
+        # Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
+      - innolux,p120zdg-bf1
         # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
       - innolux,zj070na-01p
         # King & Display KD116N21-30NV-A010 eDP TFT LCD panel
@@ -220,6 +234,10 @@ properties:
       - logictechno,lttd800480070-l6wh-rt
         # Mitsubishi "AA070MC01 7.0" WVGA TFT LCD panel
       - mitsubishi,aa070mc01-ca1
+        # Multi-Inno Technology Co.,Ltd MI0700S4T-6 7" 800x480 TFT Resistive Touch Module
+      - multi-inno,mi0700s4t-6
+        # Multi-Inno Technology Co.,Ltd MI0800FT-9 8" 800x600 TFT Resistive Touch Module
+      - multi-inno,mi0800ft-9
         # Multi-Inno Technology Co.,Ltd MI1010AIT-1CP 10.1" 1280x800 LVDS IPS Cap Touch Mod.
       - multi-inno,mi1010ait-1cp
         # NEC LCD Technologies, Ltd. 12.1" WXGA (1280x800) LVDS TFT LCD panel
@@ -266,6 +284,8 @@ properties:
       - samsung,atna33xc20
         # Samsung 12.2" (2560x1600 pixels) TFT LCD panel
       - samsung,lsn122dl01-c01
+        # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel
+      - samsung,ltl101al01
         # Samsung Electronics 10.1" WSVGA TFT LCD panel
       - samsung,ltn101nt05
         # Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
@@ -280,6 +300,8 @@ properties:
       - sharp,lq101k1ly04
         # Sharp 12.3" (2400x1600 pixels) TFT LCD panel
       - sharp,lq123p1jx31
+        # Sharp 14" (1920x1080 pixels) TFT LCD panel
+      - sharp,lq140m1jw46
         # Sharp LS020B1DD01D 2.0" HQVGA TFT LCD panel
       - sharp,ls020b1dd01d
         # Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
@@ -288,6 +310,10 @@ properties:
       - starry,kr070pe2t
         # Starry 12.2" (1920x1200 pixels) TFT LCD panel
       - starry,kr122ea0sra
+        # Startek KD070WVFPA043-C069A 7" TFT LCD panel
+      - startek,kd070wvfpa
+        # Team Source Display Technology TST043015CMHX 4.3" WQVGA TFT LCD panel
+      - team-source-display,tst043015cmhx
         # Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel
       - tianma,tm070jdhg30
         # Tianma Micro-electronics TM070JVHG33 7.0" WXGA TFT LCD panel
@@ -309,6 +335,8 @@ properties:
       - urt,umsh-8596md-11t
       - urt,umsh-8596md-19t
       - urt,umsh-8596md-20t
+        # Vivax TPC-9150 tablet 9.0" WSVGA TFT LCD panel
+      - vivax,tpc9150-panel
         # VXT 800x480 color TFT LCD panel
       - vxt,vl050-8048nt-c01
         # Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel
@@ -317,6 +345,7 @@ properties:
       - yes-optoelectronics,ytc700tlag-05-201c
 
   backlight: true
+  ddc-i2c-bus: true
   enable-gpios: true
   port: true
   power-supply: true
diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
index 9bf592dc3033..aea69b84ca5d 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/panel-timing.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: panel timing bindings
+title: panel timing
 
 maintainers:
   - Thierry Reding <thierry.reding@gmail.com>
@@ -17,29 +17,29 @@ description: |
 
   The parameters are defined as seen in the following illustration.
 
-  +----------+-------------------------------------+----------+-------+
-  |          |        ^                            |          |       |
-  |          |        |vback_porch                 |          |       |
-  |          |        v                            |          |       |
-  +----------#######################################----------+-------+
-  |          #        ^                            #          |       |
-  |          #        |                            #          |       |
-  |  hback   #        |                            #  hfront  | hsync |
-  |   porch  #        |       hactive              #  porch   |  len  |
-  |<-------->#<-------+--------------------------->#<-------->|<----->|
-  |          #        |                            #          |       |
-  |          #        |vactive                     #          |       |
-  |          #        |                            #          |       |
-  |          #        v                            #          |       |
-  +----------#######################################----------+-------+
-  |          |        ^                            |          |       |
-  |          |        |vfront_porch                |          |       |
-  |          |        v                            |          |       |
-  +----------+-------------------------------------+----------+-------+
-  |          |        ^                            |          |       |
-  |          |        |vsync_len                   |          |       |
-  |          |        v                            |          |       |
-  +----------+-------------------------------------+----------+-------+
+  +-------+----------+-------------------------------------+----------+
+  |       |          |        ^                            |          |
+  |       |          |        |vsync_len                   |          |
+  |       |          |        v                            |          |
+  +-------+----------+-------------------------------------+----------+
+  |       |          |        ^                            |          |
+  |       |          |        |vback_porch                 |          |
+  |       |          |        v                            |          |
+  +-------+----------#######################################----------+
+  |       |          #        ^                            #          |
+  |       |          #        |                            #          |
+  | hsync |  hback   #        |                            #  hfront  |
+  |  len  |   porch  #        |       hactive              #  porch   |
+  |<----->|<-------->#<-------+--------------------------->#<-------->|
+  |       |          #        |                            #          |
+  |       |          #        |vactive                     #          |
+  |       |          #        |                            #          |
+  |       |          #        v                            #          |
+  +-------+----------#######################################----------+
+  |       |          |        ^                            |          |
+  |       |          |        |vfront_porch                |          |
+  |       |          |        v                            |          |
+  +-------+----------+-------------------------------------+----------+
 
 
   The following is the panel timings shown with time on the x-axis.
@@ -71,78 +71,72 @@ properties:
 
   hfront-porch:
     description: Horizontal front porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of pixels
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of pixels
 
   hback-porch:
     description: Horizontal back porch timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of pixels
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of pixels
 
   hsync-len:
     description: Horizontal sync length panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of pixels
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of pixels
 
   vfront-porch:
     description: Vertical front porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of lines
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of lines
 
   vback-porch:
     description: Vertical back porch panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of lines
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of lines
 
   vsync-len:
     description: Vertical sync length panel timing
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     oneOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-        maxItems: 1
+      - maxItems: 1
         items:
           description: typical number of lines
-      - $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 3
+      - minItems: 3
         maxItems: 3
         items:
           description: min, typ, max number of lines
@@ -152,6 +146,7 @@ properties:
       Horizontal sync pulse.
       0 selects active low, 1 selects active high.
       If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   vsync-active:
@@ -159,6 +154,7 @@ properties:
       Vertical sync pulse.
       0 selects active low, 1 selects active high.
       If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   de-active:
@@ -166,6 +162,7 @@ properties:
       Data enable.
       0 selects active low, 1 selects active high.
       If omitted then it is not used by the hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   pixelclk-active:
@@ -175,6 +172,7 @@ properties:
       sample data on rising edge.
       Use 1 to drive pixel data on rising edge and
       sample data on falling edge
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   syncclk-active:
@@ -185,6 +183,7 @@ properties:
       sample sync on rising edge of pixel clock.
       Use 1 to drive sync on rising edge and
       sample sync on falling edge of pixel clock
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   interlaced:
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
index 745dd247c409..d62fd692bf10 100644
--- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
@@ -24,6 +24,7 @@ properties:
 
   dsi-lanes:
     description: Number of DSI lanes to be used must be <3> or <4>
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [3, 4]
 
   v3p3-supply:
@@ -37,6 +38,7 @@ properties:
       0 - burst-mode
       1 - non-burst with sync event
       2 - non-burst with sync pulse
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1, 2]
 
 required:
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
index 39477793d289..e8ce2315631a 100644
--- a/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
+++ b/Documentation/devicetree/bindings/display/panel/raydium,rm68200.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Raydium Semiconductor Corporation RM68200 5.5" 720p MIPI-DSI TFT LCD panel
 
 maintainers:
-  - Philippe CORNU <philippe.cornu@st.com>
+  - Philippe CORNU <philippe.cornu@foss.st.com>
 
 description: |
   The Raydium Semiconductor Corporation RM68200 is a 5.5" 720x1280 TFT LCD
diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
index d67617f6f74a..95ce22c6787a 100644
--- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
@@ -37,7 +37,7 @@ properties:
 
   backlight:
     description: Backlight used by the panel
-    $ref: "/schemas/types.yaml#/definitions/phandle"
+    $ref: /schemas/types.yaml#/definitions/phandle
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml
new file mode 100644
index 000000000000..58fa073ce258
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,ams495qa01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung AMS495QA01 panel with Magnachip D53E6EA8966 controller
+
+maintainers:
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,ams495qa01
+
+  reg: true
+  reset-gpios:
+    description: reset gpio, must be GPIO_ACTIVE_LOW
+  elvdd-supply:
+    description: regulator that supplies voltage to the panel display
+  enable-gpios: true
+  port: true
+  vdd-supply:
+    description: regulator that supplies voltage to panel logic
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "samsung,ams495qa01";
+            reg = <0>;
+            reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_3v3>;
+
+            port {
+                mipi_in_panel: endpoint {
+                  remote-endpoint = <&mipi_out_panel>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
index 060ee27a4749..c0fabeb38628 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Andrzej Hajda <a.hajda@samsung.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -45,6 +42,9 @@ properties:
   panel-height-mm:
     description: physical panel height [mm]
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - reg
@@ -63,8 +63,6 @@ examples:
 
         lcd@0 {
             compatible = "samsung,ld9040";
-            #address-cells = <1>;
-            #size-cells = <0>;
 
             reg = <0>;
             vdd3-supply = <&ldo7_reg>;
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
index 251f0c7115aa..70ffc88d2a08 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml
@@ -9,14 +9,13 @@ title: Samsung LMS380KF01 display panel
 description: The LMS380KF01 is a 480x800 DPI display panel from Samsung Mobile
   Displays (SMD) utilizing the WideChips WS2401 display controller. It can be
   used with internal or external backlight control.
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -59,7 +58,7 @@ required:
   - spi-cpol
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
index cd62968426fb..5e77cee93f83 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml
@@ -14,6 +14,7 @@ maintainers:
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -51,7 +52,7 @@ required:
   - spi-cpol
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
new file mode 100644
index 000000000000..d273faf4442a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d27a1.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/samsung,s6d27a1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S6D27A1 display panel
+
+description: The S6D27A1 is a 480x800 DPI display panel from Samsung Mobile
+  Displays (SMD).
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: samsung,s6d27a1
+
+  reg: true
+
+  interrupts:
+    description: provides an optional ESD (electrostatic discharge)
+      interrupt that signals abnormalities in the display hardware.
+      This can also be raised for other reasons like erroneous
+      configuration.
+    maxItems: 1
+
+  reset-gpios: true
+
+  vci-supply:
+    description: regulator that supplies the VCI analog voltage
+      usually around 3.0 V
+
+  vccio-supply:
+    description: regulator that supplies the VCCIO voltage usually
+      around 1.8 V
+
+  backlight: true
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    maximum: 1200000
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vci-supply
+  - vccio-supply
+  - spi-cpha
+  - spi-cpol
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        compatible = "spi-gpio";
+        sck-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+        miso-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+        mosi-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+        cs-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+        num-chipselects = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "samsung,s6d27a1";
+            spi-max-frequency = <1200000>;
+            spi-cpha;
+            spi-cpol;
+            reg = <0>;
+            vci-supply = <&lcd_3v0_reg>;
+            vccio-supply = <&lcd_1v8_reg>;
+            reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+            interrupt-parent = <&gpio>;
+            interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&display_out>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
index ea58df49263a..6f1fc7469f07 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml
@@ -12,6 +12,7 @@ maintainers:
 allOf:
   - $ref: panel-common.yaml#
   - $ref: /schemas/leds/backlight/common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -23,6 +24,10 @@ properties:
   default-brightness: true
   max-brightness: true
 
+  spi-3wire: true
+  spi-cpha: true
+  spi-cpol: true
+
   vdd3-supply:
     description: VDD regulator
 
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
index 44ce98f68705..b749e9e906b7 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e88a0-ams452ef01.yaml
@@ -16,6 +16,7 @@ properties:
   compatible:
     const: samsung,s6e88a0-ams452ef01
   reg: true
+  port: true
   reset-gpios: true
   vdd3-supply:
     description: core voltage supply
@@ -25,6 +26,7 @@ properties:
 required:
   - compatible
   - reg
+  - port
   - vdd3-supply
   - vci-supply
   - reset-gpios
@@ -46,5 +48,11 @@ examples:
                     vdd3-supply = <&pm8916_l17>;
                     vci-supply = <&reg_vlcd_vci>;
                     reset-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
+
+                    port {
+                            panel_in: endpoint {
+                                    remote-endpoint = <&dsi0_out>;
+                            };
+                    };
             };
     };
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
index ca959451557e..1cdc91b3439f 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
@@ -36,6 +36,7 @@ properties:
 
   init-delay:
     description: delay after initialization sequence [ms]
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   panel-width-mm:
     description: physical panel width [mm]
diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml
index cfaa50cf5f5d..1df3cbb51ff9 100644
--- a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml
+++ b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel
 
 maintainers:
-  - Marco Franchi <marco.franchi@nxp.com>
+  - Fabio Estevam <festevam@gmail.com>
 
 allOf:
   - $ref: panel-common.yaml#
@@ -25,6 +25,8 @@ properties:
   avdd-supply:
     description: 5v analog regulator
 
+  enable-gpios: true
+
 required:
   - compatible
   - dvdd-supply
diff --git a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
index e63a570ae59d..e32d9188a3e0 100644
--- a/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
@@ -7,17 +7,27 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Solomon Goldentek Display GKTW70SDAE4SE 7" WVGA LVDS Display Panel
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Thierry Reding <thierry.reding@gmail.com>
 
 allOf:
-  - $ref: lvds.yaml#
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/display/lvds.yaml#
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: sgd,gktw70sdae4se
+
+  required:
+    - compatible
 
 properties:
   compatible:
     items:
       - const: sgd,gktw70sdae4se
-      - {} # panel-lvds, but not listed here to avoid false select
+      - const: panel-lvds
 
   data-mapping:
     const: jeida-18
@@ -35,6 +45,11 @@ additionalProperties: false
 
 required:
   - compatible
+  - port
+  - data-mapping
+  - width-mm
+  - height-mm
+  - panel-timing
 
 examples:
   - |+
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml
index a679d3647dbd..57b44a0e763d 100644
--- a/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.yaml
@@ -30,7 +30,12 @@ allOf:
 
 properties:
   compatible:
-    const: sharp,lq101r1sx01
+    oneOf:
+      - items:
+          - const: sharp,lq101r1sx03
+          - const: sharp,lq101r1sx01
+      - enum:
+          - sharp,lq101r1sx01
 
   reg: true
   power-supply: true
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml
new file mode 100644
index 000000000000..271c097cc9a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ls060t1sx01.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sharp,ls060t1sx01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sharp Microelectronics 6.0" FullHD TFT LCD panel
+
+maintainers:
+  - Dmitry Baryskov <dmitry.baryshkov@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sharp,ls060t1sx01
+
+  reg: true
+  backlight: true
+  reset-gpios: true
+  port: true
+
+  avdd-supply:
+    description: handle of the regulator that provides the positive supply voltage
+  avee-supply:
+    description: handle of the regulator that provides the negative supply voltage
+  vddi-supply:
+    description: handle of the regulator that provides the I/O supply voltage
+  vddh-supply:
+    description: handle of the regulator that provides the analog supply voltage
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sharp,ls060t1sx01";
+            reg = <0>;
+            avdd-supply = <&pm8941_l22>;
+            backlight = <&backlight>;
+            reset-gpios = <&pm8916_gpios 25 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
index 6dff59fe4be1..4dc0cd4a6a77 100644
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
@@ -17,6 +17,9 @@ description: |
   Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has
   inbuilt ST7701 chip.
 
+  Densitron DMT028VGHMCMI-1A is 480x640, 2-lane MIPI DSI LCD panel
+  which has built-in ST7701 chip.
+
 allOf:
   - $ref: panel-common.yaml#
 
@@ -24,6 +27,8 @@ properties:
   compatible:
     items:
       - enum:
+          - densitron,dmt028vghmcmi-1a
+          - elida,kd50t048a
           - techstar,ts8550b
       - const: sitronix,st7701
 
@@ -37,7 +42,9 @@ properties:
   IOVCC-supply:
     description: I/O system regulator
 
+  port: true
   reset-gpios: true
+  rotation: true
 
   backlight: true
 
@@ -46,6 +53,7 @@ required:
   - reg
   - VCC-supply
   - IOVCC-supply
+  - port
   - reset-gpios
 
 additionalProperties: false
@@ -65,5 +73,11 @@ examples:
             IOVCC-supply = <&reg_dldo2>;
             reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */
             backlight = <&backlight>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
index fa46d151e7b3..fa6556363cca 100644
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7789v.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Sitronix ST7789V RGB panel with SPI control bus
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -26,6 +23,13 @@ properties:
   backlight: true
   port: true
 
+  spi-cpha: true
+  spi-cpol: true
+
+  dc-gpios:
+    maxItems: 1
+    description: DCX pin, Display data/command selection pin in parallel interface
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
index 78d060097052..059cc6dbcfca 100644
--- a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml
@@ -4,7 +4,12 @@
 $id: http://devicetree.org/schemas/display/panel/sony,acx424akp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Sony ACX424AKP 4" 480x864 AMOLED panel
+title: Sony ACX424AKP/ACX424AKM 4" 480x864/480x854 AMOLED panel
+
+description: The Sony ACX424AKP and ACX424AKM are panels built around
+  the Novatek NT35560 display controller. The only difference is that
+  the AKM is configured to use 10 pixels less in the Y axis than the
+  AKP.
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
@@ -14,7 +19,9 @@ allOf:
 
 properties:
   compatible:
-    const: sony,acx424akp
+    enum:
+      - sony,acx424akp
+      - sony,acx424akm
   reg: true
   reset-gpios: true
   vddi-supply:
diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
index 95d053c548ab..98abdf4ddeac 100644
--- a/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sony,acx565akm.yaml
@@ -6,15 +6,12 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Sony ACX565AKM SDI Panel
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Tomi Valkeinen <tomi.valkeinen@ti.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml
new file mode 100644
index 000000000000..b6b885b4c22d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sony,td4353-jdi.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,td4353-jdi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony TD4353 JDI 5 / 5.7" 2160x1080 MIPI-DSI Panel
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description: |
+  The Sony TD4353 JDI is a 5 (XZ2c) / 5.7 (XZ2) inch 2160x1080
+  MIPI-DSI panel, used in Xperia XZ2 and XZ2 Compact smartphones.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sony,td4353-jdi-tama
+
+  reg: true
+
+  backlight: true
+
+  vddio-supply:
+    description: VDDIO 1.8V supply
+
+  vsp-supply:
+    description: Positive 5.5V supply
+
+  vsn-supply:
+    description: Negative 5.5V supply
+
+  panel-reset-gpios:
+    description: Display panel reset pin
+
+  touch-reset-gpios:
+    description: Touch panel reset pin
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vsp-supply
+  - vsn-supply
+  - panel-reset-gpios
+  - touch-reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel: panel@0 {
+            compatible = "sony,td4353-jdi-tama";
+            reg = <0>;
+
+            backlight = <&pmi8998_wled>;
+            vddio-supply = <&vreg_l14a_1p8>;
+            vsp-supply = <&lab>;
+            vsn-supply = <&ibb>;
+            panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+            touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml
new file mode 100644
index 000000000000..967972939598
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/sony,tulip-truly-nt35521.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony Tulip Truly NT35521 5.24" 1280x720 MIPI-DSI Panel
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The Sony Tulip Truly NT35521 is a 5.24" 1280x720 MIPI-DSI panel, which
+  can be found no Sony Xperia M4 phone.  The panel backlight is managed
+  through DSI link.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: sony,tulip-truly-nt35521
+
+  reg: true
+
+  positive5-supply:
+    description: Positive 5V supply
+
+  negative5-supply:
+    description: Negative 5V supply
+
+  reset-gpios: true
+
+  enable-gpios: true
+
+  port: true
+
+required:
+  - compatible
+  - reg
+  - positive5-supply
+  - negative5-supply
+  - reset-gpios
+  - enable-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "sony,tulip-truly-nt35521";
+            reg = <0>;
+            positive5-supply = <&positive5_reg>;
+            negative5-supply = <&negative5_reg>;
+            reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
index 4aa605613445..e8c8ee8d7c88 100644
--- a/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
+++ b/Documentation/devicetree/bindings/display/panel/tpo,td.yaml
@@ -6,16 +6,13 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Toppoly TD Panels
 
-description: |
-  The panel must obey the rules for a SPI slave device as specified in
-  spi/spi-controller.yaml
-
 maintainers:
   - Marek Belisko <marek@goldelico.com>
   - H. Nikolaus Schaller <hns@goldelico.com>
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -31,6 +28,9 @@ properties:
   backlight: true
   port: true
 
+  spi-cpha: true
+  spi-cpol: true
+
 required:
   - compatible
   - port
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
index 6f1f02044b4b..f0243d196191 100644
--- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
+++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
@@ -41,6 +41,7 @@ description: |+
 
 allOf:
   - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
index 076b057b4af5..444ac2a4772d 100644
--- a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
+++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Visionox model RM69299 Panels Device Tree Bindings.
+title: Visionox model RM69299 Panels
 
 maintainers:
   - Harigovindan P <harigovi@codeaurora.org>
@@ -19,6 +19,8 @@ properties:
   compatible:
     const: visionox,rm69299-1080p-display
 
+  reg: true
+
   vdda-supply:
     description: |
       Phandle of the regulator that provides the vdda supply voltage.
@@ -34,6 +36,7 @@ additionalProperties: false
 
 required:
   - compatible
+  - reg
   - vdda-supply
   - vdd3p3-supply
   - reset-gpios
@@ -41,16 +44,22 @@ required:
 
 examples:
   - |
-    panel {
-        compatible = "visionox,rm69299-1080p-display";
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "visionox,rm69299-1080p-display";
+            reg = <0>;
 
-        vdda-supply = <&src_pp1800_l8c>;
-        vdd3p3-supply = <&src_pp2800_l18a>;
+            vdda-supply = <&src_pp1800_l8c>;
+            vdd3p3-supply = <&src_pp2800_l18a>;
 
-        reset-gpios = <&pm6150l_gpio 3 0>;
-        port {
-            panel0_in: endpoint {
-                remote-endpoint = <&dsi0_out>;
+            reset-gpios = <&pm6150l_gpio 3 0>;
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml
new file mode 100644
index 000000000000..84562a5b710a
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/visionox,vtdr6130.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/visionox,vtdr6130.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Visionox VTDR6130 AMOLED DSI Panel
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: visionox,vtdr6130
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vddio-supply: true
+  vci-supply: true
+  vdd-supply: true
+  port: true
+  reset-gpios: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vddio-supply
+  - vci-supply
+  - vdd-supply
+  - reset-gpios
+  - port
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "visionox,vtdr6130";
+            reg = <0>;
+
+            vddio-supply = <&vreg_l12b_1p8>;
+            vci-supply = <&vreg_l13b_3p0>;
+            vdd-supply = <&vreg_l11b_1p2>;
+
+            reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel0_in: endpoint {
+                    remote-endpoint = <&dsi0_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
index d5c46a3cc2b0..c407deb6afb1 100644
--- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
+++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -17,6 +17,7 @@ properties:
     const: xinpeng,xpp055c272
   reg: true
   backlight: true
+  port: true
   reset-gpios: true
   iovcc-supply:
     description: regulator that supplies the iovcc voltage
@@ -27,6 +28,7 @@ required:
   - compatible
   - reg
   - backlight
+  - port
   - iovcc-supply
   - vci-supply
 
@@ -44,6 +46,12 @@ examples:
             backlight = <&backlight>;
             iovcc-supply = <&vcc_1v8>;
             vci-supply = <&vcc3v3_lcd>;
+
+            port {
+                mipi_in_panel: endpoint {
+                    remote-endpoint = <&mipi_out_panel>;
+                };
+            };
         };
     };
 
diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml
index e3ca5389c17d..c5b9e6812bce 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,du.yaml
@@ -39,6 +39,8 @@ properties:
       - renesas,du-r8a77980 # for R-Car V3H compatible DU
       - renesas,du-r8a77990 # for R-Car E3 compatible DU
       - renesas,du-r8a77995 # for R-Car D3 compatible DU
+      - renesas,du-r8a779a0 # for R-Car V3U compatible DU
+      - renesas,du-r8a779g0 # for R-Car V4H compatible DU
 
   reg:
     maxItems: 1
@@ -74,18 +76,22 @@ properties:
     unevaluatedProperties: false
 
   renesas,cmms:
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       A list of phandles to the CMM instances present in the SoC, one for each
       available DU channel.
 
   renesas,vsps:
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle to VSP instance that serves the DU channel
+        - description: Channel index identifying the LIF instance in that VSP
     description:
       A list of phandle and channel index tuples to the VSPs that handle the
-      memory interfaces for the DU channels. The phandle identifies the VSP
-      instance that serves the DU channel, and the channel index identifies
-      the LIF instance in that VSP.
+      memory interfaces for the DU channels.
 
 required:
   - compatible
@@ -104,7 +110,6 @@ allOf:
       properties:
         clocks:
           minItems: 1
-          maxItems: 3
           items:
             - description: Functional clock
             - description: DU_DOTCLKIN0 input clock
@@ -112,7 +117,6 @@ allOf:
 
         clock-names:
           minItems: 1
-          maxItems: 3
           items:
             - const: du.0
             - pattern: '^dclkin\.[01]$'
@@ -154,7 +158,6 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 4
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -163,7 +166,6 @@ allOf:
 
         clock-names:
           minItems: 2
-          maxItems: 4
           items:
             - const: du.0
             - const: du.1
@@ -211,7 +213,6 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 4
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -220,7 +221,6 @@ allOf:
 
         clock-names:
           minItems: 2
-          maxItems: 4
           items:
             - const: du.0
             - const: du.1
@@ -266,7 +266,6 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 4
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -275,7 +274,6 @@ allOf:
 
         clock-names:
           minItems: 2
-          maxItems: 4
           items:
             - const: du.0
             - const: du.1
@@ -322,7 +320,6 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 4
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -331,7 +328,6 @@ allOf:
 
         clock-names:
           minItems: 2
-          maxItems: 4
           items:
             - const: du.0
             - const: du.1
@@ -381,7 +377,6 @@ allOf:
       properties:
         clocks:
           minItems: 3
-          maxItems: 6
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -392,7 +387,6 @@ allOf:
 
         clock-names:
           minItems: 3
-          maxItems: 6
           items:
             - const: du.0
             - const: du.1
@@ -443,7 +437,6 @@ allOf:
       properties:
         clocks:
           minItems: 4
-          maxItems: 8
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -456,7 +449,6 @@ allOf:
 
         clock-names:
           minItems: 4
-          maxItems: 8
           items:
             - const: du.0
             - const: du.1
@@ -520,7 +512,6 @@ allOf:
       properties:
         clocks:
           minItems: 3
-          maxItems: 6
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -531,7 +522,6 @@ allOf:
 
         clock-names:
           minItems: 3
-          maxItems: 6
           items:
             - const: du.0
             - const: du.1
@@ -591,7 +581,6 @@ allOf:
       properties:
         clocks:
           minItems: 3
-          maxItems: 6
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -602,7 +591,6 @@ allOf:
 
         clock-names:
           minItems: 3
-          maxItems: 6
           items:
             - const: du.0
             - const: du.1
@@ -661,14 +649,12 @@ allOf:
       properties:
         clocks:
           minItems: 1
-          maxItems: 2
           items:
             - description: Functional clock for DU0
             - description: DU_DOTCLKIN0 input clock
 
         clock-names:
           minItems: 1
-          maxItems: 2
           items:
             - const: du.0
             - const: dclkin.0
@@ -718,7 +704,6 @@ allOf:
       properties:
         clocks:
           minItems: 2
-          maxItems: 4
           items:
             - description: Functional clock for DU0
             - description: Functional clock for DU1
@@ -727,7 +712,6 @@ allOf:
 
         clock-names:
           minItems: 2
-          maxItems: 4
           items:
             - const: du.0
             - const: du.1
@@ -773,6 +757,56 @@ allOf:
         - reset-names
         - renesas,vsps
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,du-r8a779a0
+              - renesas,du-r8a779g0
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Functional clock
+
+        clock-names:
+          items:
+            - const: du.0
+
+        interrupts:
+          maxItems: 2
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          items:
+            - const: du.0
+
+        ports:
+          properties:
+            port@0:
+              description: DSI 0
+            port@1:
+              description: DSI 1
+            port@2: false
+            port@3: false
+
+          required:
+            - port@0
+            - port@1
+
+        renesas,vsps:
+          minItems: 2
+
+      required:
+        - clock-names
+        - interrupts
+        - resets
+        - reset-names
+        - renesas,vsps
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
deleted file mode 100644
index 43561584c13a..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-Rockchip RK3288 specific extensions to the Analogix Display Port
-================================
-
-Required properties:
-- compatible: "rockchip,rk3288-dp",
-	      "rockchip,rk3399-edp";
-
-- reg: physical base address of the controller and length
-
-- clocks: from common clock binding: handle to dp clock.
-	  of memory mapped region.
-
-- clock-names: from common clock binding:
-	       Required elements: "dp" "pclk"
-
-- resets: Must contain an entry for each entry in reset-names.
-	  See ../reset/reset.txt for details.
-
-- pinctrl-names: Names corresponding to the chip hotplug pinctrl states.
-- pinctrl-0: pin-control mode. should be <&edp_hpd>
-
-- reset-names: Must include the name "dp"
-
-- rockchip,grf: this soc should set GRF regs, so need get grf here.
-
-- ports: there are 2 port nodes with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
-    Port 0: contained 2 endpoints, connecting to the output of vop.
-    Port 1: contained 1 endpoint, connecting to the input of panel.
-
-Optional property for different chips:
-- clocks: from common clock binding: handle to grf_vio clock.
-
-- clock-names: from common clock binding:
-	       Required elements: "grf"
-
-For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
-- phys (required)
-- phy-names (required)
-- hpd-gpios (optional)
-- force-hpd (optional)
--------------------------------------------------------------------------------
-
-Example:
-	dp-controller: dp@ff970000 {
-		compatible = "rockchip,rk3288-dp";
-		reg = <0xff970000 0x4000>;
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
-		clock-names = "dp", "pclk";
-		phys = <&dp_phy>;
-		phy-names = "dp";
-
-		rockchip,grf = <&grf>;
-		resets = <&cru 111>;
-		reset-names = "dp";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_hpd>;
-
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			edp_in: port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				edp_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_edp>;
-				};
-				edp_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_edp>;
-				};
-			};
-
-			edp_out: port@1 {
-				reg = <1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				edp_out_panel: endpoint {
-					reg = <0>;
-					remote-endpoint = <&panel_in_edp>
-				};
-			};
-		};
-	};
-
-	pinctrl {
-		edp {
-			edp_hpd: edp-hpd {
-				rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_none>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
deleted file mode 100644
index 39792f051d2d..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Rockchip specific extensions to the Synopsys Designware MIPI DSI
-================================
-
-Required properties:
-- #address-cells: Should be <1>.
-- #size-cells: Should be <0>.
-- compatible: one of
-	"rockchip,px30-mipi-dsi", "snps,dw-mipi-dsi"
-	"rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi"
-	"rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi"
-- reg: Represent the physical address range of the controller.
-- interrupts: Represent the controller's interrupt to the CPU(s).
-- clocks, clock-names: Phandles to the controller's pll reference
-  clock(ref) when using an internal dphy and APB clock(pclk).
-  For RK3399, a phy config clock (phy_cfg) and a grf clock(grf)
-  are required. As described in [1].
-- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
-- ports: contain a port node with endpoint definitions as defined in [2].
-  For vopb,set the reg = <0> and set the reg = <1> for vopl.
-- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
-- video port 1 for either a panel or subsequent encoder
-
-Optional properties:
-- phys: from general PHY binding: the phandle for the PHY device.
-- phy-names: Should be "dphy" if phys references an external phy.
-- #phy-cells: Defined when used as ISP phy, should be 0.
-- power-domains: a phandle to mipi dsi power domain node.
-- resets: list of phandle + reset specifier pairs, as described in [3].
-- reset-names: string reset name, must be "apb".
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/media/video-interfaces.txt
-[3] Documentation/devicetree/bindings/reset/reset.txt
-
-Example:
-	mipi_dsi: mipi@ff960000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
-		reg = <0xff960000 0x4000>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
-		clock-names = "ref", "pclk";
-		resets = <&cru SRST_MIPIDSI0>;
-		reset-names = "apb";
-		rockchip,grf = <&grf>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			mipi_in: port@0 {
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				mipi_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_mipi>;
-				};
-				mipi_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_mipi>;
-				};
-			};
-
-			mipi_out: port@1 {
-				reg = <1>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				mipi_out_panel: endpoint {
-					remote-endpoint = <&panel_in_mipi>;
-				};
-			};
-		};
-
-		panel {
-			compatible ="boe,tv080wum-nl0";
-			reg = <0>;
-
-			enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&lcd_en>;
-			backlight = <&backlight>;
-
-			port {
-				panel_in_mipi: endpoint {
-					remote-endpoint = <&mipi_out_panel>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
new file mode 100644
index 000000000000..60dedf9b2be7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,analogix-dp.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,analogix-dp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Analogix Display Port
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-dp
+      - rockchip,rk3399-edp
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: dp
+      - const: pclk
+      - const: grf
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: dp
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This SoC makes use of GRF regs.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - rockchip,grf
+
+allOf:
+  - $ref: /schemas/display/bridge/analogix,dp.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    dp@ff970000 {
+      compatible = "rockchip,rk3288-dp";
+      reg = <0xff970000 0x4000>;
+      interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+      clock-names = "dp", "pclk";
+      phys = <&dp_phy>;
+      phy-names = "dp";
+      resets = <&cru 111>;
+      reset-names = "dp";
+      rockchip,grf = <&grf>;
+      pinctrl-0 = <&edp_hpd>;
+      pinctrl-names = "default";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        edp_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          edp_in_vopb: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vopb_out_edp>;
+          };
+          edp_in_vopl: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vopl_out_edp>;
+          };
+        };
+
+        edp_out: port@1 {
+          reg = <1>;
+
+          edp_out_panel: endpoint {
+            remote-endpoint = <&panel_in_edp>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
index da3b889ad8fc..7e59dee15a5f 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
@@ -23,10 +23,22 @@ properties:
       - rockchip,rk3288-dw-hdmi
       - rockchip,rk3328-dw-hdmi
       - rockchip,rk3399-dw-hdmi
+      - rockchip,rk3568-dw-hdmi
 
   reg-io-width:
     const: 4
 
+  avdd-0v9-supply:
+    description:
+      A 0.9V supply that powers up the SoC internal circuitry. The actual pin name
+      varies between the different SoCs and is usually HDMI_TX_AVDD_0V9 or sometimes
+      HDMI_AVDD_1V0.
+
+  avdd-1v8-supply:
+    description:
+      A 1.8V supply that powers up the SoC internal circuitry. The pin name on the
+      SoC usually is HDMI_TX_AVDD_1V8.
+
   clocks:
     minItems: 2
     items:
@@ -36,7 +48,8 @@ properties:
       # order when present.
       - description: The HDMI CEC controller main clock
       - description: Power for GRF IO
-      - description: External clock for some HDMI PHY
+      - description: External clock for some HDMI PHY (old clock name, deprecated)
+      - description: External clock for some HDMI PHY (new name)
 
   clock-names:
     minItems: 2
@@ -47,10 +60,14 @@ properties:
           - cec
           - grf
           - vpll
+          - ref
       - enum:
           - grf
           - vpll
-      - const: vpll
+          - ref
+      - enum:
+          - vpll
+          - ref
 
   ddc-i2c-bus:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -72,6 +89,7 @@ properties:
       The unwedge pinctrl entry shall drive the DDC SDA line low. This is
       intended to work around a hardware errata that can cause the DDC I2C
       bus to be wedged.
+    minItems: 1
     items:
       - const: default
       - const: unwedge
@@ -79,27 +97,21 @@ properties:
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
-    properties:
-      port:
-        $ref: /schemas/graph.yaml#/$defs/port-base
-        unevaluatedProperties: false
+    patternProperties:
+      "^port(@0)?$":
+        $ref: /schemas/graph.yaml#/properties/port
         description: Input of the DWC HDMI TX
-
         properties:
+          endpoint:
+            description: Connection to the VOP
           endpoint@0:
-            $ref: /schemas/graph.yaml#/properties/endpoint
             description: Connection to the VOPB
-
           endpoint@1:
-            $ref: /schemas/graph.yaml#/properties/endpoint
             description: Connection to the VOPL
-
-        required:
-          - endpoint@0
-          - endpoint@1
-
-    required:
-      - port
+    properties:
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output of the DWC HDMI TX
 
   rockchip,grf:
     $ref: /schemas/types.yaml#/definitions/phandle
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
new file mode 100644
index 000000000000..8e8a40879140
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-mipi-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip specific extensions to the Synopsys Designware MIPI DSI
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - rockchip,px30-mipi-dsi
+          - rockchip,rk3288-mipi-dsi
+          - rockchip,rk3399-mipi-dsi
+          - rockchip,rk3568-mipi-dsi
+      - const: snps,dw-mipi-dsi
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    oneOf:
+      - minItems: 2
+        items:
+          - const: ref
+          - const: pclk
+          - const: phy_cfg
+          - const: grf
+      - const: pclk
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      This SoC uses GRF regs to switch between vopl/vopb.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dphy
+
+  "#phy-cells":
+    const: 0
+    description:
+      Defined when in use as ISP phy.
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - rockchip,grf
+
+allOf:
+  - $ref: /schemas/display/bridge/snps,dw-mipi-dsi.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-mipi-dsi
+              - rockchip,rk3568-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+      required:
+        - phys
+        - phy-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-mipi-dsi
+
+    then:
+      properties:
+        clocks:
+          minItems: 4
+
+        clock-names:
+          minItems: 4
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mipi_dsi: dsi@ff960000 {
+      compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+      reg = <0xff960000 0x4000>;
+      interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>;
+      clock-names = "ref", "pclk";
+      resets = <&cru SRST_MIPIDSI0>;
+      reset-names = "apb";
+      rockchip,grf = <&grf>;
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mipi_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          mipi_in_vopb: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vopb_out_mipi>;
+          };
+          mipi_in_vopl: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vopl_out_mipi>;
+          };
+        };
+
+        mipi_out: port@1 {
+          reg = <1>;
+
+          mipi_out_panel: endpoint {
+            remote-endpoint = <&panel_in_mipi>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,lvds.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,lvds.yaml
new file mode 100644
index 000000000000..03b002a05c47
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,lvds.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip,lvds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip low-voltage differential signal (LVDS) transmitter
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-lvds
+      - rockchip,rk3288-lvds
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk_lvds
+
+  avdd1v0-supply:
+    description: 1.0V analog power.
+
+  avdd1v8-supply:
+    description: 1.8V analog power.
+
+  avdd3v3-supply:
+    description: 3.3V analog power.
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the general register files syscon.
+
+  rockchip,output:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [rgb, lvds, duallvds]
+    description: This describes the output interface.
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: dphy
+
+  pinctrl-names:
+    const: lcdc
+
+  pinctrl-0: true
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port 0 for the VOP input.
+          The remote endpoint maybe vopb or vopl.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port 1 for either a panel or subsequent encoder.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - rockchip,grf
+  - rockchip,output
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-lvds
+
+    then:
+      properties:
+        reg: false
+        clocks: false
+        clock-names: false
+        avdd1v0-supply: false
+        avdd1v8-supply: false
+        avdd3v3-supply: false
+
+      required:
+        - phys
+        - phy-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-lvds
+
+    then:
+      properties:
+        phys: false
+        phy-names: false
+
+      required:
+        - reg
+        - clocks
+        - clock-names
+        - avdd1v0-supply
+        - avdd1v8-supply
+        - avdd3v3-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3288-cru.h>
+
+    lvds: lvds@ff96c000 {
+      compatible = "rockchip,rk3288-lvds";
+      reg = <0xff96c000 0x4000>;
+      clocks = <&cru PCLK_LVDS_PHY>;
+      clock-names = "pclk_lvds";
+      avdd1v0-supply = <&vdd10_lcd>;
+      avdd1v8-supply = <&vcc18_lcd>;
+      avdd3v3-supply = <&vcca_33>;
+      pinctrl-names = "lcdc";
+      pinctrl-0 = <&lcdc_ctl>;
+      rockchip,grf = <&grf>;
+      rockchip,output = "rgb";
+
+      ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lvds_in: port@0 {
+          reg = <0>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          lvds_in_vopb: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&vopb_out_lvds>;
+          };
+          lvds_in_vopl: endpoint@1 {
+            reg = <1>;
+            remote-endpoint = <&vopl_out_lvds>;
+          };
+        };
+
+        lvds_out: port@1 {
+          reg = <1>;
+
+          lvds_out_panel: endpoint {
+            remote-endpoint = <&panel_in_lvds>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
index 008c144257cb..1a68a940d165 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
@@ -26,14 +26,6 @@ properties:
   clock-names:
     const: hclk
 
-  pinctrl-0:
-    maxItems: 2
-
-  pinctrl-names:
-    const: default
-    description:
-      Switch the iomux for the HPD/I2C pins to HDMI function.
-
   power-domains:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
index 7204da5eb4c5..a8d18a37cb23 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml
@@ -21,6 +21,8 @@ properties:
 
   ports:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description: |
       Should contain a list of phandles pointing to display interface port
       of vop devices. vop definitions as defined in
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
deleted file mode 100644
index aaf8c44cf90f..000000000000
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Rockchip RK3288 LVDS interface
-================================
-
-Required properties:
-- compatible: matching the soc type, one of
-	- "rockchip,rk3288-lvds";
-	- "rockchip,px30-lvds";
-
-- reg: physical base address of the controller and length
-	of memory mapped region.
-- clocks: must include clock specifiers corresponding to entries in the
-	clock-names property.
-- clock-names: must contain "pclk_lvds"
-
-- avdd1v0-supply: regulator phandle for 1.0V analog power
-- avdd1v8-supply: regulator phandle for 1.8V analog power
-- avdd3v3-supply: regulator phandle for 3.3V analog power
-
-- rockchip,grf: phandle to the general register files syscon
-- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface
-
-- phys: LVDS/DSI DPHY (px30 only)
-- phy-names: name of the PHY, must be "dphy" (px30 only)
-
-Optional properties:
-- pinctrl-names: must contain a "lcdc" entry.
-- pinctrl-0: pin control group to be used for this controller.
-
-Required nodes:
-
-The lvds has two video ports as described by
-	Documentation/devicetree/bindings/media/video-interfaces.txt
-Their connections are modeled using the OF graph bindings specified in
-	Documentation/devicetree/bindings/graph.txt.
-
-- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
-- video port 1 for either a panel or subsequent encoder
-
-Example:
-
-lvds_panel: lvds-panel {
-	compatible = "auo,b101ean01";
-	enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
-	data-mapping = "jeida-24";
-
-	ports {
-		panel_in_lvds: endpoint {
-			remote-endpoint = <&lvds_out_panel>;
-		};
-	};
-};
-
-For Rockchip RK3288:
-
-	lvds: lvds@ff96c000 {
-		compatible = "rockchip,rk3288-lvds";
-		rockchip,grf = <&grf>;
-		reg = <0xff96c000 0x4000>;
-		clocks = <&cru PCLK_LVDS_PHY>;
-		clock-names = "pclk_lvds";
-		pinctrl-names = "lcdc";
-		pinctrl-0 = <&lcdc_ctl>;
-		avdd1v0-supply = <&vdd10_lcd>;
-		avdd1v8-supply = <&vcc18_lcd>;
-		avdd3v3-supply = <&vcca_33>;
-		rockchip,output = "rgb";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			lvds_in: port@0 {
-				reg = <0>;
-
-				lvds_in_vopb: endpoint@0 {
-					reg = <0>;
-					remote-endpoint = <&vopb_out_lvds>;
-				};
-				lvds_in_vopl: endpoint@1 {
-					reg = <1>;
-					remote-endpoint = <&vopl_out_lvds>;
-				};
-			};
-
-			lvds_out: port@1 {
-				reg = <1>;
-
-				lvds_out_panel: endpoint {
-					remote-endpoint = <&panel_in_lvds>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
new file mode 100644
index 000000000000..fba45091d909
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop2.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/rockchip/rockchip-vop2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SoC display controller (VOP2)
+
+description:
+  VOP2 (Video Output Processor v2) is the display controller for the Rockchip
+  series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+maintainers:
+  - Sandy Huang <hjc@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3566-vop
+      - rockchip,rk3568-vop
+
+  reg:
+    items:
+      - description:
+          Must contain one entry corresponding to the base address and length
+          of the register space.
+      - description:
+          Can optionally contain a second entry corresponding to
+          the CRTC gamma LUT address.
+
+  reg-names:
+    items:
+      - const: vop
+      - const: gamma-lut
+
+  interrupts:
+    maxItems: 1
+    description:
+      The VOP interrupt is shared by several interrupt sources, such as
+      frame start (VSYNC), line flag and other status interrupts.
+
+  clocks:
+    items:
+      - description: Clock for ddr buffer transfer.
+      - description: Clock for the ahb bus to R/W the phy regs.
+      - description: Pixel clock for video port 0.
+      - description: Pixel clock for video port 1.
+      - description: Pixel clock for video port 2.
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+      - const: dclk_vp0
+      - const: dclk_vp1
+      - const: dclk_vp2
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to GRF regs used for misc control
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of VP2
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/clock/rk3568-cru.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/power/rk3568-power.h>
+        bus {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            vop: vop@fe040000 {
+                compatible = "rockchip,rk3568-vop";
+                reg = <0x0 0xfe040000 0x0 0x3000>, <0x0 0xfe044000 0x0 0x1000>;
+                reg-names = "vop", "gamma-lut";
+                interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&cru ACLK_VOP>,
+                         <&cru HCLK_VOP>,
+                         <&cru DCLK_VOP0>,
+                         <&cru DCLK_VOP1>,
+                         <&cru DCLK_VOP2>;
+                clock-names = "aclk",
+                              "hclk",
+                              "dclk_vp0",
+                              "dclk_vp1",
+                              "dclk_vp2";
+                power-domains = <&power RK3568_PD_VO>;
+                iommus = <&vop_mmu>;
+                vop_out: ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    vp0: port@0 {
+                        reg = <0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp1: port@1 {
+                        reg = <1>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                    vp2: port@2 {
+                        reg = <2>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                    };
+                };
+            };
+        };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml
new file mode 100644
index 000000000000..458d399cb025
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi-ddc.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi-ddc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC HDMI DDC
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: samsung,exynos4210-hdmiddc
+      - const: samsung,exynos5-hdmiddc
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ddc@50 {
+            compatible = "samsung,exynos4210-hdmiddc";
+            reg = <0x50>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml
new file mode 100644
index 000000000000..e4a68c5a1a09
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-hdmi.yaml
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC HDMI
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-hdmi
+      - samsung,exynos4212-hdmi
+      - samsung,exynos5420-hdmi
+      - samsung,exynos5433-hdmi
+
+  clocks:
+    minItems: 5
+    maxItems: 10
+
+  clock-names:
+    minItems: 5
+    maxItems: 10
+
+  ddc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the HDMI DDC node.
+
+  hdmi-en-supply:
+    description:
+      Provides voltage source for DCC lines available on HDMI connector. When
+      there is no power provided for DDC epprom, some TV-sets do not pulls up
+      HPD (hot plug detect) line, what causes HDMI block to stay turned off.
+      When provided, the regulator allows TV-set correctly signal HPD event.
+
+  hpd-gpios:
+    maxItems: 1
+    description:
+      A GPIO line connected to HPD
+
+  interrupts:
+    maxItems: 1
+
+  phy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the HDMI PHY node.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Contains a port which is connected to mic node.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the PMU system controller node.
+
+  samsung,sysreg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface.
+
+  '#sound-dai-cells':
+    const: 0
+
+  vdd-supply:
+    description:
+      VDD 1.0V HDMI TX.
+
+  vdd_osc-supply:
+    description:
+      VDD 1.8V HDMI OSC.
+
+  vdd_pll-supply:
+    description:
+      VDD 1.0V HDMI PLL.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ddc
+  - hpd-gpios
+  - interrupts
+  - phy
+  - reg
+  - samsung,syscon-phandle
+  - '#sound-dai-cells'
+  - vdd-supply
+  - vdd_osc-supply
+  - vdd_pll-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-hdmi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Gate of HDMI IP APB bus.
+            - description: Gate of HDMI-PHY IP APB bus.
+            - description: Gate of HDMI TMDS clock.
+            - description: Gate of HDMI pixel clock.
+            - description: TMDS clock generated by HDMI-PHY.
+            - description: MUX used to switch between oscclk and tmds_clko,
+                respectively if HDMI-PHY is off and operational.
+            - description: Pixel clock generated by HDMI-PHY.
+            - description: MUX used to switch between oscclk and pixel_clko,
+                respectively if HDMI-PHY is off and operational.
+            - description: Oscillator clock, used as parent of following *_user
+                clocks in case HDMI-PHY is not operational.
+            - description: Gate of HDMI SPDIF clock.
+        clock-names:
+          items:
+            - const: hdmi_pclk
+            - const: hdmi_i_pclk
+            - const: i_tmds_clk
+            - const: i_pixel_clk
+            - const: tmds_clko
+            - const: tmds_clko_user
+            - const: pixel_clko
+            - const: pixel_clko_user
+            - const: oscclk
+            - const: i_spdif_clk
+      required:
+        - samsung,sysreg-phandle
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Gate of HDMI IP bus clock.
+            - description: Gate of HDMI special clock.
+            - description: Pixel special clock, one of the two possible inputs
+                of HDMI clock mux.
+            - description: HDMI PHY clock output, one of two possible inputs of
+                HDMI clock mux.
+            - description: It is required by the driver to switch between the 2
+                parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable
+                after configuration, parent is set to sclk_hdmiphy else
+                sclk_pixel.
+        clock-names:
+          items:
+            - const: hdmi
+            - const: sclk_hdmi
+            - const: sclk_pixel
+            - const: sclk_hdmiphy
+            - const: mout_hdmi
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    hdmi@13970000 {
+        compatible = "samsung,exynos5433-hdmi";
+        reg = <0x13970000 0x70000>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cmu_disp CLK_PCLK_HDMI>,
+                 <&cmu_disp CLK_PCLK_HDMIPHY>,
+                 <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO>,
+                 <&cmu_disp CLK_PHYCLK_HDMI_PIXEL>,
+                 <&cmu_disp CLK_PHYCLK_HDMIPHY_TMDS_CLKO_PHY>,
+                 <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_TMDS_CLKO_USER>,
+                 <&cmu_disp CLK_PHYCLK_HDMIPHY_PIXEL_CLKO_PHY>,
+                 <&cmu_disp CLK_MOUT_PHYCLK_HDMIPHY_PIXEL_CLKO_USER>,
+                 <&xxti>,
+                 <&cmu_disp CLK_SCLK_HDMI_SPDIF>;
+        clock-names = "hdmi_pclk",
+                      "hdmi_i_pclk",
+                      "i_tmds_clk",
+                      "i_pixel_clk",
+                      "tmds_clko",
+                      "tmds_clko_user",
+                      "pixel_clko",
+                      "pixel_clko_user",
+                      "oscclk",
+                      "i_spdif_clk";
+        phy = <&hdmiphy>;
+        ddc = <&hsi2c_11>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+        samsung,sysreg-phandle = <&syscon_disp>;
+        #sound-dai-cells = <0>;
+
+        hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
+        vdd-supply = <&ldo6_reg>;
+        vdd_osc-supply = <&ldo7_reg>;
+        vdd_pll-supply = <&ldo6_reg>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                hdmi_to_tv: endpoint {
+                    remote-endpoint = <&tv_to_hdmi>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                hdmi_to_mhl: endpoint {
+                    remote-endpoint = <&mhl_to_hdmi>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
new file mode 100644
index 000000000000..25d53fde92e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos-mixer.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos-mixer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Mixer
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  Samsung Exynos SoC Mixer is responsible for mixing and blending multiple data
+  inputs before passing it to an output device.  The output is passed to HDMI.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos4210-mixer
+          - samsung,exynos4212-mixer
+          - samsung,exynos5250-mixer
+          - samsung,exynos5420-mixer
+      - const: samsung,exynos5-mixer
+        deprecated: true
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Gate of Mixer IP bus clock.
+      - description: Gate of HDMI IP bus clock, needed together with sclk_hdmi.
+      - description: HDMI Special clock, one of the two possible inputs of
+          mixer mux.
+      - description: Video Processor clock.
+      - description: Mixer mux clock.
+      - description: Mixer Special clock.
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: mixer
+      - const: hdmi
+      - const: sclk_hdmi
+      - const: vp
+      - const: mout_mixer
+      - const: sclk_mixer
+
+  interconnects:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    minItems: 1
+    items:
+      - description: Mixer memory region.
+      - description: Video Processor memory region.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4210-mixer
+              - samsung,exynos4212-mixer
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        regs:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos4212-mixer
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        regs:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5-mixer
+              - samsung,exynos5250-mixer
+              - samsung,exynos5420-mixer
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        regs:
+          minItems: 1
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mixer@14450000 {
+        compatible = "samsung,exynos5250-mixer";
+        reg = <0x14450000 0x10000>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_MIXER>,
+                 <&clock CLK_HDMI>,
+                 <&clock CLK_SCLK_HDMI>;
+        clock-names = "mixer",
+                      "hdmi",
+                      "sclk_hdmi";
+        iommus = <&sysmmu_tv>;
+        power-domains = <&pd_disp1>;
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml
new file mode 100644
index 000000000000..6380eeebb073
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-decon.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-decon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC Display and Enhancement Controller (DECON)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  DECON (Display and Enhancement Controller) is the Display Controller for the
+  Exynos5433 series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5433-decon
+      - samsung,exynos5433-decon-tv
+
+  clocks:
+    maxItems: 11
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: aclk_decon
+      - const: aclk_smmu_decon0x
+      - const: aclk_xiu_decon0x
+      - const: pclk_smmu_decon0x
+      - const: aclk_smmu_decon1x
+      - const: aclk_xiu_decon1x
+      - const: pclk_smmu_decon1x
+      - const: sclk_decon_vclk
+      - const: sclk_decon_eclk
+      - const: dsd
+
+  interrupts:
+    minItems: 3
+    maxItems: 4
+    description: |
+      Interrupts depend on mode of work:
+       - video mode: vsync
+       - command mode: lcd_sys
+       - command mode with software trigger: lcd_sys, te
+
+  interrupt-names:
+    minItems: 3
+    items:
+      - const: fifo
+      - const: vsync
+      - const: lcd_sys
+      - const: te
+
+  iommus:
+    maxItems: 2
+
+  iommu-names:
+    items:
+      - const: m0
+      - const: m1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Contains a port which is connected to mic node.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,disp-sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - ports
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display-controller@13800000 {
+        compatible = "samsung,exynos5433-decon";
+        reg = <0x13800000 0x2104>;
+        clocks = <&cmu_disp CLK_PCLK_DECON>,
+                 <&cmu_disp CLK_ACLK_DECON>,
+                 <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+                 <&cmu_disp CLK_ACLK_XIU_DECON0X>,
+                 <&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+                 <&cmu_disp CLK_ACLK_SMMU_DECON1X>,
+                 <&cmu_disp CLK_ACLK_XIU_DECON1X>,
+                 <&cmu_disp CLK_PCLK_SMMU_DECON1X>,
+                 <&cmu_disp CLK_SCLK_DECON_VCLK>,
+                 <&cmu_disp CLK_SCLK_DECON_ECLK>,
+                 <&cmu_disp CLK_SCLK_DSD>;
+        clock-names = "pclk",
+                      "aclk_decon",
+                      "aclk_smmu_decon0x",
+                      "aclk_xiu_decon0x",
+                      "pclk_smmu_decon0x",
+                      "aclk_smmu_decon1x",
+                      "aclk_xiu_decon1x",
+                      "pclk_smmu_decon1x",
+                      "sclk_decon_vclk",
+                      "sclk_decon_eclk",
+                      "dsd";
+        power-domains = <&pd_disp>;
+        interrupt-names = "fifo", "vsync", "lcd_sys";
+        interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+        samsung,disp-sysreg = <&syscon_disp>;
+        iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>;
+        iommu-names = "m0", "m1";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                decon_to_mic: endpoint {
+                    remote-endpoint = <&mic_to_decon>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml
new file mode 100644
index 000000000000..26e5017737a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos5433-mic.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos5433-mic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC Mobile Image Compressor (MIC)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  MIC (Mobile Image Compressor) resides between DECON and MIPI DSI. MIPI DSI is
+  not capable of transferring high resoltuion frame data as DECON can send. MIC
+  solves this problem by compressing the frame data by 1/2 before it is
+  transferred through MIPI DSI. The compressed frame data must be uncompressed
+  in the panel PCB.
+
+properties:
+  compatible:
+    const: samsung,exynos5433-mic
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk_mic0
+      - const: sclk_rgb_vclk_to_mic0
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Contains a port which is connected to mic node.
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,disp-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to DISP system controller interface.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ports
+  - reg
+  - samsung,disp-syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    image-processor@13930000 {
+        compatible = "samsung,exynos5433-mic";
+        reg = <0x13930000 0x48>;
+        clocks = <&cmu_disp CLK_PCLK_MIC0>,
+                 <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+        clock-names = "pclk_mic0",
+                      "sclk_rgb_vclk_to_mic0";
+        power-domains = <&pd_disp>;
+        samsung,disp-syscon = <&syscon_disp>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                mic_to_decon: endpoint {
+                    remote-endpoint = <&decon_to_mic>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                mic_to_dsi: endpoint {
+                    remote-endpoint = <&dsi_to_mic>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml
new file mode 100644
index 000000000000..992c23ca7a4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,exynos7-decon.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,exynos7-decon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7 SoC Display and Enhancement Controller (DECON)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  DECON (Display and Enhancement Controller) is the Display Controller for the
+  Exynos7 series of SoCs which transfers the image data from a video memory
+  buffer to an external LCD interface.
+
+properties:
+  compatible:
+    const: samsung,exynos7-decon
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: pclk_decon0
+      - const: aclk_decon0
+      - const: decon0_eclk
+      - const: decon0_vclk
+
+  display-timings:
+    $ref: ../panel/display-timings.yaml#
+
+  i80-if-timings:
+    type: object
+    additionalProperties: false
+    description: timing configuration for lcd i80 interface support
+    properties:
+      cs-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of address signal is enabled until
+          chip select is enabled.
+        default: 0
+
+      wr-active:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is enabled.
+        default: 1
+
+      wr-hold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is disabled until write
+          signal is disabled.
+        default: 0
+
+      wr-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS signal is enabled until
+          write signal is enabled.
+        default: 0
+
+  interrupts:
+    items:
+      - description: FIFO level
+      - description: VSYNC
+      - description: LCD system
+
+  interrupt-names:
+    items:
+      - const: fifo
+      - const: vsync
+      - const: lcd_sys
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos7-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    display-controller@13930000 {
+        compatible = "samsung,exynos7-decon";
+        reg = <0x13930000 0x1000>;
+        interrupt-names = "fifo", "vsync", "lcd_sys";
+        interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock_disp 100>, /* PCLK_DECON_INT */
+                 <&clock_disp 101>, /* ACLK_DECON_INT */
+                 <&clock_disp 102>, /* SCLK_DECON_INT_ECLK */
+                 <&clock_disp 103>; /* SCLK_DECON_INT_EXTCLKPLL */
+        clock-names = "pclk_decon0",
+                      "aclk_decon0",
+                      "decon0_eclk",
+                      "decon0_vclk";
+        pinctrl-0 = <&lcd_clk &pwm1_out>;
+        pinctrl-names = "default";
+    };
diff --git a/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml
new file mode 100644
index 000000000000..075231716b2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/samsung/samsung,fimd.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/samsung/samsung,fimd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC Fully Interactive Mobile Display (FIMD)
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Seung-Woo Kim <sw0312.kim@samsung.com>
+  - Kyungmin Park <kyungmin.park@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c2443-fimd
+      - samsung,s3c6400-fimd
+      - samsung,s5pv210-fimd
+      - samsung,exynos3250-fimd
+      - samsung,exynos4210-fimd
+      - samsung,exynos5250-fimd
+      - samsung,exynos5420-fimd
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: sclk_fimd
+      - const: fimd
+
+  display-timings:
+    $ref: ../panel/display-timings.yaml#
+
+  i80-if-timings:
+    type: object
+    additionalProperties: false
+    description: |
+      Timing configuration for lcd i80 interface support.
+      The parameters are defined as::
+      VCLK(internal)  __|??????|_____|??????|_____|??????|_____|??????|_____|??
+                        :            :            :            :            :
+      Address Output  --:<XXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XXXXXXXXXXXX:XX
+                        | cs-setup+1 |            :            :            :
+                        |<---------->|            :            :            :
+      Chip Select     ???????????????|____________:____________:____________|??
+                                     | wr-setup+1 |            | wr-hold+1  |
+                                     |<---------->|            |<---------->|
+      Write Enable    ????????????????????????????|____________|???????????????
+                                                  | wr-active+1|
+                                                  |<---------->|
+      Video Data      ----------------------------<XXXXXXXXXXXXXXXXXXXXXXXXX>--
+
+    properties:
+      cs-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of address signal is enabled until
+          chip select is enabled.
+        default: 0
+
+      wr-active:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is enabled.
+        default: 1
+
+      wr-hold:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS is disabled until write
+          signal is disabled.
+        default: 0
+
+      wr-setup:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Clock cycles for the active period of CS signal is enabled until
+          write signal is enabled.
+        default: 0
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  iommu-names:
+    items:
+      - const: m0
+      - const: m1
+
+  interrupts:
+    items:
+      - description: FIFO level
+      - description: VSYNC
+      - description: LCD system
+
+  interrupt-names:
+    items:
+      - const: fifo
+      - const: vsync
+      - const: lcd_sys
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,invert-vden:
+    type: boolean
+    description:
+      Video enable signal is inverted.
+
+  samsung,invert-vclk:
+    type: boolean
+    description:
+      Video clock signal is inverted.
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to System Register syscon.
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^port@[0-4]+$":
+    $ref: /schemas/graph.yaml#/properties/port
+    description: |
+      Contains ports with port with index::
+       0 - for CAMIF0 input,
+       1 - for CAMIF1 input,
+       2 - for CAMIF2 input,
+       3 - for parallel output,
+       4 - for write-back interface
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5420-fimd
+    then:
+      properties:
+        iommus:
+          minItems: 2
+          maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+
+    fimd@11c00000 {
+        compatible = "samsung,exynos4210-fimd";
+        interrupt-parent = <&combiner>;
+        reg = <0x11c00000 0x20000>;
+        interrupt-names = "fifo", "vsync", "lcd_sys";
+        interrupts = <11 0>, <11 1>, <11 2>;
+        clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
+        clock-names = "sclk_fimd", "fimd";
+        power-domains = <&pd_lcd0>;
+        iommus = <&sysmmu_fimd0>;
+        samsung,sysreg = <&sys_reg>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        samsung,invert-vden;
+        samsung,invert-vclk;
+
+        pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+        pinctrl-names = "default";
+
+        port@3 {
+            reg = <3>;
+
+            fimd_dpi_ep: endpoint {
+                remote-endpoint = <&lcd_ep>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
index c2499a7906f5..296500f9da05 100644
--- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
@@ -4,10 +4,9 @@
 $id: http://devicetree.org/schemas/display/simple-framebuffer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Simple Framebuffer Device Tree Bindings
+title: Simple Framebuffer
 
 maintainers:
-  - Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
   - Hans de Goede <hdegoede@redhat.com>
 
 description: |+
@@ -27,6 +26,11 @@ description: |+
   over control to a driver for the real hardware. The bindings for the
   hw nodes must specify which node is considered the primary node.
 
+  If a panel node is given, then the driver uses this to configure the
+  physical width and height of the display. If no panel node is given,
+  then the driver uses the width and height properties of the simplefb
+  node to estimate it.
+
   It is advised to add display# aliases to help the OS determine how
   to number things. If display# aliases are used, then if the simplefb
   node contains a display property then the /aliases/display# path
@@ -52,16 +56,23 @@ description: |+
 
 properties:
   compatible:
-    items:
-      - enum:
-          - apple,simple-framebuffer
-          - allwinner,simple-framebuffer
-          - amlogic,simple-framebuffer
+    oneOf:
+      - items:
+          - enum:
+              - apple,simple-framebuffer
+              - allwinner,simple-framebuffer
+              - amlogic,simple-framebuffer
+          - const: simple-framebuffer
       - const: simple-framebuffer
 
   reg:
     description: Location and size of the framebuffer memory
 
+  memory-region:
+    maxItems: 1
+    description: Phandle to a node describing the memory to be used for the
+      framebuffer. If present, overrides the "reg" property (if one exists).
+
   clocks:
     description: List of clocks used by the framebuffer.
 
@@ -83,20 +94,38 @@ properties:
   format:
     description: >
       Format of the framebuffer:
+        * `a1r5g5b5` - 16-bit pixels, d[15]=a, d[14:10]=r, d[9:5]=g, d[4:0]=b
+        * `a2r10g10b10` - 32-bit pixels, d[31:30]=a, d[29:20]=r, d[19:10]=g, d[9:0]=b
         * `a8b8g8r8` - 32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r
+        * `a8r8g8b8` - 32-bit pixels, d[31:24]=a, d[23:16]=r, d[15:8]=g, d[7:0]=b
         * `r5g6b5` - 16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b
+        * `r5g5b5a1` - 16-bit pixels, d[15:11]=r, d[10:6]=g, d[5:1]=b d[1:0]=a
+        * `r8g8b8` - 24-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b
+        * `x1r5g5b5` - 16-bit pixels, d[14:10]=r, d[9:5]=g, d[4:0]=b
         * `x2r10g10b10` - 32-bit pixels, d[29:20]=r, d[19:10]=g, d[9:0]=b
         * `x8r8g8b8` - 32-bit pixels, d[23:16]=r, d[15:8]=g, d[7:0]=b
+        * `x8b8g8r8` - 32-bit pixels, d[23:16]=b, d[15:8]=g, d[7:0]=r
     enum:
+      - a1r5g5b5
+      - a2r10g10b10
       - a8b8g8r8
+      - a8r8g8b8
       - r5g6b5
+      - r5g5b5a1
+      - r8g8b8
+      - x1r5g5b5
       - x2r10g10b10
       - x8r8g8b8
+      - x8b8g8r8
 
   display:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: Primary display hardware node
 
+  panel:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Display panel node
+
   allwinner,pipeline:
     description: Pipeline used by the framebuffer on Allwinner SoCs
     enum:
diff --git a/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
index 0cebaaefda03..621f27148419 100644
--- a/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
+++ b/Documentation/devicetree/bindings/display/sitronix,st7735r.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/sitronix,st7735r.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Sitronix ST7735R Display Panels Device Tree Bindings
+title: Sitronix ST7735R Display Panels
 
 maintainers:
   - David Lechner <david@lechnology.com>
@@ -15,6 +15,7 @@ description:
 
 allOf:
   - $ref: panel/panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -32,15 +33,13 @@ properties:
               - okaya,rh128128t
           - const: sitronix,st7715r
 
-  spi-max-frequency:
-    maximum: 32000000
-
   dc-gpios:
     maxItems: 1
     description: Display data/command selection (D/CX)
 
   backlight: true
   reg: true
+  spi-max-frequency: true
   reset-gpios: true
   rotation: true
 
@@ -48,7 +47,6 @@ required:
   - compatible
   - reg
   - dc-gpios
-  - reset-gpios
 
 additionalProperties: false
 
@@ -72,6 +70,7 @@ examples:
                     dc-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
                     reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
                     rotation = <270>;
+                    backlight = <&backlight>;
             };
     };
 
diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
index 2ed2a7d0ca2f..94bb5ef567c6 100644
--- a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
+++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
@@ -8,14 +8,24 @@ title: Solomon SSD1307 OLED Controller Framebuffer
 
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
+  - Javier Martinez Canillas <javierm@redhat.com>
 
 properties:
   compatible:
-    enum:
-      - solomon,ssd1305fb-i2c
-      - solomon,ssd1306fb-i2c
-      - solomon,ssd1307fb-i2c
-      - solomon,ssd1309fb-i2c
+    oneOf:
+      # Deprecated compatible strings
+      - enum:
+          - solomon,ssd1305fb-i2c
+          - solomon,ssd1306fb-i2c
+          - solomon,ssd1307fb-i2c
+          - solomon,ssd1309fb-i2c
+        deprecated: true
+      - enum:
+          - sinowealth,sh1106
+          - solomon,ssd1305
+          - solomon,ssd1306
+          - solomon,ssd1307
+          - solomon,ssd1309
 
   reg:
     maxItems: 1
@@ -26,6 +36,14 @@ properties:
   reset-gpios:
     maxItems: 1
 
+  # Only required for SPI
+  dc-gpios:
+    description:
+      GPIO connected to the controller's D/C# (Data/Command) pin,
+      that is needed for 4-wire SPI to tell the controller if the
+      data sent is for a command register or the display data RAM
+    maxItems: 1
+
   vbat-supply:
     description: The supply for VBAT
 
@@ -130,11 +148,27 @@ required:
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sinowealth,sh1106
+    then:
+      properties:
+        solomon,dclk-div:
+          default: 1
+        solomon,dclk-frq:
+          default: 5
+
   - if:
       properties:
         compatible:
           contains:
-            const: solomon,ssd1305fb-i2c
+            enum:
+              - solomon,ssd1305-i2c
+              - solomon,ssd1305
     then:
       properties:
         solomon,dclk-div:
@@ -146,7 +180,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: solomon,ssd1306fb-i2c
+            enum:
+              - solomon,ssd1306-i2c
+              - solomon,ssd1306
     then:
       properties:
         solomon,dclk-div:
@@ -158,7 +194,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: solomon,ssd1307fb-i2c
+            enum:
+              - solomon,ssd1307-i2c
+              - solomon,ssd1307
     then:
       properties:
         solomon,dclk-div:
@@ -172,7 +210,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: solomon,ssd1309fb-i2c
+            enum:
+              - solomon,ssd1309-i2c
+              - solomon,ssd1309
     then:
       properties:
         solomon,dclk-div:
@@ -180,26 +220,53 @@ allOf:
         solomon,dclk-frq:
           default: 10
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-    i2c1 {
+    i2c {
             #address-cells = <1>;
             #size-cells = <0>;
 
-            ssd1307: oled@3c {
-                    compatible = "solomon,ssd1307fb-i2c";
+            ssd1307_i2c: oled@3c {
+                    compatible = "solomon,ssd1307";
                     reg = <0x3c>;
                     pwms = <&pwm 4 3000>;
                     reset-gpios = <&gpio2 7>;
             };
 
-            ssd1306: oled@3d {
-                    compatible = "solomon,ssd1306fb-i2c";
-                    reg = <0x3c>;
+            ssd1306_i2c: oled@3d {
+                    compatible = "solomon,ssd1306";
+                    reg = <0x3d>;
+                    pwms = <&pwm 4 3000>;
+                    reset-gpios = <&gpio2 7>;
+                    solomon,com-lrremap;
+                    solomon,com-invdir;
+                    solomon,com-offset = <32>;
+                    solomon,lookup-table = /bits/ 8 <0x3f 0x3f 0x3f 0x3f>;
+            };
+    };
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ssd1307_spi: oled@0 {
+                    compatible = "solomon,ssd1307";
+                    reg = <0x0>;
+                    pwms = <&pwm 4 3000>;
+                    reset-gpios = <&gpio2 7>;
+                    dc-gpios = <&gpio2 8>;
+                    spi-max-frequency = <10000000>;
+            };
+
+            ssd1306_spi: oled@1 {
+                    compatible = "solomon,ssd1306";
+                    reg = <0x1>;
                     pwms = <&pwm 4 3000>;
                     reset-gpios = <&gpio2 7>;
+                    dc-gpios = <&gpio2 8>;
+                    spi-max-frequency = <10000000>;
                     solomon,com-lrremap;
                     solomon,com-invdir;
                     solomon,com-offset = <32>;
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
new file mode 100644
index 000000000000..b3d5e1b96fae
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,display-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc DRM master device
+
+maintainers:
+  - Kevin Tang <kevin.tang@unisoc.com>
+
+description: |
+  The Unisoc DRM master device is a virtual device needed to list all
+  DPU devices or other display interface nodes that comprise the
+  graphics subsystem.
+
+  Unisoc's display pipeline have several components as below description,
+  multi display controllers and corresponding physical interfaces.
+  For different display scenarios, dpu0 and dpu1 maybe binding to different
+  encoder.
+
+  E.g:
+  dpu0 and dpu1 both binding to DSI for dual mipi-dsi display;
+  dpu0 binding to DSI for primary display, and dpu1 binding to DP for external display;
+
+          +-----------------------------------------+
+          |                                         |
+          |                            +---------+  |
+  +----+  |   +----+    +---------+    |DPHY/CPHY|  |   +------+
+  |    +----->+dpu0+--->+MIPI|DSI +--->+Combo    +----->+Panel0|
+  |AXI |  |   +----+    +---------+    +---------+  |   +------+
+  |    |  |                  ^                      |
+  |    |  |                  |                      |
+  |    |  |      +-----------+                      |
+  |    |  |      |                                  |
+  |APB |  |   +--+-+    +-----------+    +---+      |   +------+
+  |    +----->+dpu1+--->+DisplayPort+--->+PHY+--------->+Panel1|
+  |    |  |   +----+    +-----------+    +---+      |   +------+
+  +----+  |                                         |
+          +-----------------------------------------+
+
+properties:
+  compatible:
+    const: sprd,display-subsystem
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      Should contain a list of phandles pointing to display interface port
+      of DPU devices.
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    display-subsystem {
+        compatible = "sprd,display-subsystem";
+        ports = <&dpu_out>;
+    };
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
new file mode 100644
index 000000000000..4ebea60b8c5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc Sharkl3 Display Processor Unit (DPU)
+
+maintainers:
+  - Kevin Tang <kevin.tang@unisoc.com>
+
+description: |
+  DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
+  which transfers the image data from a video memory buffer to an internal
+  LCD interface.
+
+properties:
+  compatible:
+    const: sprd,sharkl3-dpu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: clk_src_128m
+      - const: clk_src_384m
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  port:
+    type: object
+    description:
+      A port node with endpoint definitions as defined in
+      Documentation/devicetree/bindings/media/video-interfaces.txt.
+      That port should be the output endpoint, usually output to
+      the associated DSI.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    dpu: dpu@63000000 {
+        compatible = "sprd,sharkl3-dpu";
+        reg = <0x63000000 0x1000>;
+        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "clk_src_128m", "clk_src_384m";
+
+        clocks = <&pll CLK_TWPLL_128M>,
+          <&pll CLK_TWPLL_384M>;
+
+        dpu_port: port {
+            dpu_out: endpoint {
+                remote-endpoint = <&dsi_in>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
new file mode 100644
index 000000000000..bc5594d18643
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dsi-host.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dsi-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc MIPI DSI Controller
+
+maintainers:
+  - Kevin Tang <kevin.tang@unisoc.com>
+
+properties:
+  compatible:
+    const: sprd,sharkl3-dsi-host
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: clk_src_96m
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    type: object
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      port@0:
+        type: object
+        description:
+          A port node with endpoint definitions as defined in
+          Documentation/devicetree/bindings/media/video-interfaces.txt.
+          That port should be the input endpoint, usually coming from
+          the associated DPU.
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - port@0
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sprd,sc9860-clk.h>
+    dsi: dsi@63100000 {
+        compatible = "sprd,sharkl3-dsi-host";
+        reg = <0x63100000 0x1000>;
+        interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "clk_src_96m";
+        clocks = <&pll CLK_TWPLL_96M>;
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                dsi_in: endpoint {
+                    remote-endpoint = <&dpu_out>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
index ed310bbe3afe..c488308d7be1 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 DSI host controller
 
 maintainers:
-  - Philippe Cornu <philippe.cornu@st.com>
-  - Yannick Fertre <yannick.fertre@st.com>
+  - Philippe Cornu <philippe.cornu@foss.st.com>
+  - Yannick Fertre <yannick.fertre@foss.st.com>
 
 description:
   The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI-DSI host controller.
@@ -58,9 +58,20 @@ properties:
           DSI input port node, connected to the ltdc rgb output port.
 
       port@1:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          DSI output port node, connected to a panel or a bridge input port"
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: |
+          DSI output port node, connected to a panel or a bridge input port.
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+            properties:
+              data-lanes:
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
 
 required:
   - "#address-cells"
@@ -110,7 +121,7 @@ examples:
               };
         };
 
-        panel-dsi@0 {
+        panel@0 {
               compatible = "orisetech,otm8009a";
               reg = <0>;
               reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
@@ -125,4 +136,3 @@ examples:
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
index 4ae3d75492d3..d6ea4d62a2cf 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 lcd-tft display controller
 
 maintainers:
-  - Philippe Cornu <philippe.cornu@st.com>
-  - Yannick Fertre <yannick.fertre@st.com>
+  - Philippe Cornu <philippe.cornu@foss.st.com>
+  - Yannick Fertre <yannick.fertre@foss.st.com>
 
 properties:
   compatible:
@@ -75,4 +75,3 @@ examples:
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/display/ste,mcde.yaml b/Documentation/devicetree/bindings/display/ste,mcde.yaml
index de0c678b3c29..564ea845c82e 100644
--- a/Documentation/devicetree/bindings/display/ste,mcde.yaml
+++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml
@@ -58,8 +58,8 @@ patternProperties:
   "^dsi@[0-9a-f]+$":
     description: subnodes for the three DSI host adapters
     type: object
-    allOf:
-      - $ref: dsi-controller.yaml#
+    $ref: dsi-controller.yaml#
+
     properties:
       compatible:
         const: ste,mcde-dsi
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt
deleted file mode 100644
index e4a25cedc5cf..000000000000
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-NVIDIA Tegra MIPI pad calibration controller
-
-Required properties:
-- compatible: "nvidia,tegra<chip>-mipi"
-- reg: Physical base address and length of the controller's registers.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - mipi-cal
-- #nvidia,mipi-calibrate-cells: Should be 1. The cell is a bitmask of the pads
-  that need to be calibrated for a given device.
-
-User nodes need to contain an nvidia,mipi-calibrate property that has a
-phandle to refer to the calibration controller node and a bitmask of the pads
-that need to be calibrated.
-
-Example:
-
-	mipi: mipi@700e3000 {
-		compatible = "nvidia,tegra114-mipi";
-		reg = <0x700e3000 0x100>;
-		clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
-		clock-names = "mipi-cal";
-		#nvidia,mipi-calibrate-cells = <1>;
-	};
-
-	...
-
-	host1x@50000000 {
-		...
-
-		dsi@54300000 {
-			...
-
-			nvidia,mipi-calibrate = <&mipi 0x060>;
-
-			...
-		};
-
-		...
-	};
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
new file mode 100644
index 000000000000..f448624dd779
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra114-mipi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra MIPI pad calibration controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^mipi@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra114-mipi
+      - nvidia,tegra210-mipi
+      - nvidia,tegra186-mipi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: mipi-cal
+
+  power-domains:
+    maxItems: 1
+
+  "#nvidia,mipi-calibrate-cells":
+    description: The number of cells in a MIPI calibration specifier.
+      Should be 1. The single cell specifies a bitmask of the pads that
+      need to be calibrated for a given device.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    const: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - "#nvidia,mipi-calibrate-cells"
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra114-car.h>
+
+    mipi@700e3000 {
+        compatible = "nvidia,tegra114-mipi";
+        reg = <0x700e3000 0x100>;
+        clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
+        clock-names = "mipi-cal";
+        #nvidia,mipi-calibrate-cells = <1>;
+    };
+
+    dsia: dsi@54300000 {
+        compatible = "nvidia,tegra114-dsi";
+        reg = <0x54300000 0x00040000>;
+        clocks = <&tegra_car TEGRA114_CLK_DSIA>,
+                 <&tegra_car TEGRA114_CLK_DSIALP>,
+                 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
+        clock-names = "dsi", "lp", "parent";
+        resets = <&tegra_car 48>;
+        reset-names = "dsi";
+        nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
new file mode 100644
index 000000000000..5cdbc527a560
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-dpaux.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-dpaux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra DisplayPort AUX Interface
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Tegra Display Port Auxiliary (DPAUX) pad controller manages two
+  pins which can be assigned to either the DPAUX channel or to an I2C
+  controller.
+
+  When configured for DisplayPort AUX operation, the DPAUX controller
+  can also be used to communicate with a DisplayPort device using the
+  AUX channel.
+
+properties:
+  $nodename:
+    pattern: "^dpaux@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-dpaux
+          - nvidia,tegra210-dpaux
+          - nvidia,tegra186-dpaux
+          - nvidia,tegra194-dpaux
+
+      - items:
+          - const: nvidia,tegra132-dpaux
+          - const: nvidia,tegra124-dpaux
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock input for the DPAUX hardware
+      - description: reference clock
+
+  clock-names:
+    items:
+      - const: dpaux
+      - const: parent
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dpaux
+
+  power-domains:
+    maxItems: 1
+
+  i2c-bus:
+    description: Subnode where I2C slave devices are listed. This
+      subnode must be always present. If there are no I2C slave
+      devices, an empty node should be added. See ../../i2c/i2c.yaml
+      for more information.
+    type: object
+
+  aux-bus:
+    $ref: /schemas/display/dp-aux-bus.yaml#
+
+  vdd-supply:
+    description: phandle of a supply that powers the DisplayPort
+      link
+
+patternProperties:
+  "^pinmux-[a-z0-9]+$":
+    description:
+      Since only three configurations are possible, only three child
+      nodes are needed to describe the pin mux'ing options for the
+      DPAUX pads. Furthermore, given that the pad functions are only
+      applicable to a single set of pads, the child nodes only need
+      to describe the pad group the functions are being applied to
+      rather than the individual pads.
+    type: object
+    properties:
+      groups:
+        const: dpaux-io
+
+      function:
+        enum:
+          - aux
+          - i2c
+          - off
+
+    additionalProperties: false
+
+    required:
+      - groups
+      - function
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dpaux: dpaux@545c0000 {
+        compatible = "nvidia,tegra210-dpaux";
+        reg = <0x545c0000 0x00040000>;
+        interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
+                 <&tegra_car TEGRA210_CLK_PLL_DP>;
+        clock-names = "dpaux", "parent";
+        resets = <&tegra_car 181>;
+        reset-names = "dpaux";
+        power-domains = <&pd_sor>;
+
+        state_dpaux_aux: pinmux-aux {
+            groups = "dpaux-io";
+            function = "aux";
+        };
+
+        state_dpaux_i2c: pinmux-i2c {
+            groups = "dpaux-io";
+            function = "i2c";
+        };
+
+        state_dpaux_off: pinmux-off {
+            groups = "dpaux-io";
+            function = "off";
+        };
+
+        i2c-bus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
new file mode 100644
index 000000000000..70f0e45c71d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-sor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra SOR Output Encoder
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The Serial Output Resource (SOR) can be used to drive HDMI, LVDS, eDP
+  and DP outputs.
+
+properties:
+  $nodename:
+    pattern: "^sor@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-sor
+          - nvidia,tegra210-sor
+          - nvidia,tegra210-sor1
+          - nvidia,tegra186-sor
+          - nvidia,tegra186-sor1
+          - nvidia,tegra194-sor
+
+      - items:
+          - const: nvidia,tegra132-sor
+          - const: nvidia,tegra124-sor
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 5
+    maxItems: 6
+
+  clock-names:
+    minItems: 5
+    maxItems: 6
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: sor
+
+  power-domains:
+    maxItems: 1
+
+  avdd-io-hdmi-dp-supply:
+    description: I/O supply for HDMI/DP
+
+  vdd-hdmi-dp-pll-supply:
+    description: PLL supply for HDMI/DP
+
+  hdmi-supply:
+    description: +5.0V HDMI connector supply, required for HDMI
+
+  # Tegra186 and later
+  nvidia,interface:
+    description: index of the SOR interface
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  nvidia,panel:
+    description: phandle of a display panel, required for eDP
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,xbar-cfg:
+    description: 5 cells containing the crossbar configuration.
+      Each lane of the SOR, identified by the cell's index, is
+      mapped via the crossbar to the pad specified by the cell's
+      value.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  # optional when driving an eDP output
+  nvidia,dpaux:
+    description: phandle to a DispayPort AUX interface
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-sor
+              - nvidia,tegra194-sor
+    then:
+      properties:
+        clocks:
+          items:
+            - description: clock input for the SOR hardware
+            - description: SOR output clock
+            - description: input for the pixel clock
+            - description: reference clock for the SOR clock
+            - description: safe reference clock for the SOR clock
+                during power up
+            - description: SOR pad output clock
+
+        clock-names:
+          items:
+            - const: sor
+            - enum:
+                - source # deprecated
+                - out
+            - const: parent
+            - const: dp
+            - const: safe
+            - const: pad
+    else:
+      properties:
+        clocks:
+          items:
+            - description: clock input for the SOR hardware
+            - description: SOR output clock
+            - description: input for the pixel clock
+            - description: reference clock for the SOR clock
+            - description: safe reference clock for the SOR clock
+                during power up
+
+        clock-names:
+          items:
+            - const: sor
+            - enum:
+                - source # deprecated
+                - out
+            - const: parent
+            - const: dp
+            - const: safe
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - avdd-io-hdmi-dp-supply
+  - vdd-hdmi-dp-pll-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sor0: sor@54540000 {
+        compatible = "nvidia,tegra210-sor";
+        reg = <0x54540000 0x00040000>;
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_SOR0>,
+                 <&tegra_car TEGRA210_CLK_SOR0_OUT>,
+                 <&tegra_car TEGRA210_CLK_PLL_D_OUT0>,
+                 <&tegra_car TEGRA210_CLK_PLL_DP>,
+                 <&tegra_car TEGRA210_CLK_SOR_SAFE>;
+        clock-names = "sor", "out", "parent", "dp", "safe";
+        resets = <&tegra_car 182>;
+        reset-names = "sor";
+        pinctrl-0 = <&state_dpaux_aux>;
+        pinctrl-1 = <&state_dpaux_i2c>;
+        pinctrl-2 = <&state_dpaux_off>;
+        pinctrl-names = "aux", "i2c", "off";
+        power-domains = <&pd_sor>;
+
+        avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+        vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
+        hdmi-supply = <&vdd_hdmi>;
+
+        nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+        nvidia,hpd-gpio = <&gpio TEGRA_GPIO(CC, 1) GPIO_ACTIVE_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml
new file mode 100644
index 000000000000..7200095ef19e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-vic.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra124-vic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Image Composer
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^vic@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra124-vic
+          - nvidia,tegra210-vic
+          - nvidia,tegra186-vic
+          - nvidia,tegra194-vic
+          - nvidia,tegra234-vic
+
+      - items:
+          - const: nvidia,tegra132-vic
+          - const: nvidia,tegra124-vic
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock input for the VIC hardware
+
+  clock-names:
+    items:
+      - const: vic
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: vic
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    description: Description of the interconnect paths for the VIC;
+      see ../interconnect/interconnect.txt for details.
+    items:
+      - description: memory read client for VIC
+      - description: memory write client for VIC
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
new file mode 100644
index 000000000000..ce4589466a18
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) Display Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^display@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-dc
+      - nvidia,tegra194-dc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: display controller pixel clock
+
+  clock-names:
+    items:
+      - const: dc
+
+  resets:
+    items:
+      - description: display controller reset
+
+  reset-names:
+    items:
+      - const: dc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    description: Description of the interconnect paths for the
+      display controller; see ../interconnect/interconnect.txt
+      for details.
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read-0
+      - const: read-1
+
+  nvidia,outputs:
+    description: A list of phandles of outputs that this display
+      controller can drive.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  nvidia,head:
+    description: The number of the display controller head. This
+      is used to setup the various types of output to receive
+      video data from the given head.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - nvidia,outputs
+  - nvidia,head
+
+# see nvidia,tegra186-display.yaml for examples
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
new file mode 100644
index 000000000000..117c371ce24b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-display.yaml
@@ -0,0 +1,308 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) Display Hub
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^display-hub@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra186-display
+      - nvidia,tegra194-display
+
+  '#address-cells':
+    enum: [ 1, 2 ]
+
+  '#size-cells':
+    enum: [ 1, 2 ]
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  resets:
+    items:
+      - description: display hub reset
+      - description: window group 0 reset
+      - description: window group 1 reset
+      - description: window group 2 reset
+      - description: window group 3 reset
+      - description: window group 4 reset
+      - description: window group 5 reset
+
+  reset-names:
+    items:
+      - const: misc
+      - const: wgrp0
+      - const: wgrp1
+      - const: wgrp2
+      - const: wgrp3
+      - const: wgrp4
+      - const: wgrp5
+
+  power-domains:
+    maxItems: 1
+
+  ranges:
+    maxItems: 1
+
+patternProperties:
+  "^display@[0-9a-f]+$":
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-display
+    then:
+      properties:
+        clocks:
+          items:
+            - description: display core clock
+            - description: display stream compression clock
+            - description: display hub clock
+
+        clock-names:
+          items:
+            - const: disp
+            - const: dsc
+            - const: hub
+    else:
+      properties:
+        clocks:
+          items:
+            - description: display core clock
+            - description: display hub clock
+
+        clock-names:
+          items:
+            - const: disp
+            - const: hub
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    display-hub@15200000 {
+        compatible = "nvidia,tegra186-display";
+        reg = <0x15200000 0x00040000>;
+        resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP1>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP2>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP3>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP4>,
+                 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP5>;
+        reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+                      "wgrp3", "wgrp4", "wgrp5";
+        clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_DISP>,
+                 <&bpmp TEGRA186_CLK_NVDISPLAY_DSC>,
+                 <&bpmp TEGRA186_CLK_NVDISPLAYHUB>;
+        clock-names = "disp", "dsc", "hub";
+
+        power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x15200000 0x15200000 0x40000>;
+
+        display@15200000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15200000 0x10000>;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P0>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD0>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+            nvidia,head = <0>;
+        };
+
+        display@15210000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15210000 0x10000>;
+            interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P1>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD1>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
+            nvidia,head = <1>;
+        };
+
+        display@15220000 {
+            compatible = "nvidia,tegra186-dc";
+            reg = <0x15220000 0x10000>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA186_CLK_NVDISPLAY_P2>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_HEAD2>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+            iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
+
+            nvidia,outputs = <&sor0 &sor1>;
+            nvidia,head = <2>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra194-mc.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    display-hub@15200000 {
+        compatible = "nvidia,tegra194-display";
+        reg = <0x15200000 0x00040000>;
+        resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP1>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP2>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP3>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP4>,
+                 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP5>;
+        reset-names = "misc", "wgrp0", "wgrp1", "wgrp2",
+                      "wgrp3", "wgrp4", "wgrp5";
+        clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>,
+                 <&bpmp TEGRA194_CLK_NVDISPLAYHUB>;
+        clock-names = "disp", "hub";
+
+        power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x15200000 0x15200000 0x40000>;
+
+        display@15200000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15200000 0x10000>;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P0>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD0>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <0>;
+        };
+
+        display@15210000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15210000 0x10000>;
+            interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P1>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD1>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <1>;
+        };
+
+        display@15220000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15220000 0x10000>;
+            interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P2>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD2>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <2>;
+        };
+
+        display@15230000 {
+            compatible = "nvidia,tegra194-dc";
+            reg = <0x15230000 0x10000>;
+            interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&bpmp TEGRA194_CLK_NVDISPLAY_P3>;
+            clock-names = "dc";
+            resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_HEAD3>;
+            reset-names = "dc";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+            interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+                            <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+            interconnect-names = "dma-mem", "read-1";
+
+            nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
+            nvidia,head = <3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
new file mode 100644
index 000000000000..da75b71e8ece
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra186-dsi-padctl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra MIPI DSI pad controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^padctl@[0-9a-f]+$"
+
+  compatible:
+    const: nvidia,tegra186-dsi-padctl
+
+  reg:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dsi
+
+allOf:
+  - $ref: /schemas/reset/reset.yaml
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    padctl@15880000 {
+        compatible = "nvidia,tegra186-dsi-padctl";
+        reg = <0x15880000 0x10000>;
+        resets = <&bpmp TEGRA186_RESET_DSI>;
+        reset-names = "dsi";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml
new file mode 100644
index 000000000000..69be95afd562
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dc.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Display Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^dc@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-dc
+          - nvidia,tegra30-dc
+          - nvidia,tegra114-dc
+          - nvidia,tegra124-dc
+          - nvidia,tegra210-dc
+
+      - items:
+          - const: nvidia,tegra124-dc
+          - const: nvidia,tegra132-dc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: display controller pixel clock
+      - description: parent clock # optional
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: dc
+      - const: parent # optional
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dc
+
+  interconnect-names: true
+  interconnects: true
+
+  iommus:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  memory-region: true
+
+  nvidia,head:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of the display controller head. This is used to setup the various
+      types of output to receive video data from the given head.
+
+  nvidia,outputs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: A list of phandles of outputs that this display controller can drive.
+
+  rgb:
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-dc
+              - nvidia,tegra30-dc
+              - nvidia,tegra114-dc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: window A memory client
+            - description: window B memory client
+            - description: window B memory client (vertical filter)
+            - description: window C memory client
+            - description: cursor memory client
+
+        interconnect-names:
+          items:
+            - const: wina
+            - const: winb
+            - const: winb-vfilter
+            - const: winc
+            - const: cursor
+
+        rgb:
+          description: Each display controller node has a child node, named "rgb", that represents
+            the RGB output associated with the controller.
+          type: object
+          properties:
+            nvidia,ddc-i2c-bus:
+              $ref: /schemas/types.yaml#/definitions/phandle
+              description: phandle of an I2C controller used for DDC EDID probing
+
+            nvidia,hpd-gpio:
+              description: specifies a GPIO used for hotplug detection
+              maxItems: 1
+
+            nvidia,edid:
+              $ref: /schemas/types.yaml#/definitions/uint8-array
+              description: supplies a binary EDID blob
+
+            nvidia,panel:
+              $ref: /schemas/types.yaml#/definitions/phandle
+              description: phandle of a display panel
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra124-dc
+    then:
+      properties:
+        interconnects:
+          minItems: 4
+          items:
+            - description: window A memory client
+            - description: window B memory client
+            - description: window C memory client
+            - description: cursor memory client
+            - description: window D memory client
+            - description: window T memory client
+
+        interconnect-names:
+          minItems: 4
+          items:
+            - const: wina
+            - const: winb
+            - const: winc
+            - const: cursor
+            - const: wind
+            - const: wint
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    dc@54200000 {
+        compatible = "nvidia,tegra20-dc";
+        reg = <0x54200000 0x00040000>;
+        interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_DISP1>;
+        clock-names = "dc";
+        resets = <&tegra_car 27>;
+        reset-names = "dc";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
new file mode 100644
index 000000000000..59e1dc0813e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Display Serial Interface
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-dsi
+          - nvidia,tegra30-dsi
+          - nvidia,tegra114-dsi
+          - nvidia,tegra124-dsi
+          - nvidia,tegra210-dsi
+          - nvidia,tegra186-dsi
+
+      - items:
+          - const: nvidia,tegra132-dsi
+          - const: nvidia,tegra124-dsi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    minItems: 2
+    maxItems: 3
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: dsi
+
+  operating-points-v2: true
+
+  power-domains:
+    maxItems: 1
+
+  avdd-dsi-csi-supply:
+    description: phandle of a supply that powers the DSI controller
+
+  nvidia,mipi-calibrate:
+    description: Should contain a phandle and a specifier specifying
+      which pads are used by this DSI output and need to be
+      calibrated. See nvidia,tegra114-mipi.yaml for details.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  nvidia,panel:
+    description: phandle of a display panel
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,ganged-mode:
+    description: contains a phandle to a second DSI controller to
+      gang up with in order to support up to 8 data lanes
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+allOf:
+  - $ref: ../dsi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-dsi
+              - nvidia,tegra30-dsi
+    then:
+      properties:
+        clocks:
+          items:
+            - description: DSI module clock
+            - description: input for the pixel clock
+
+        clock-names:
+          items:
+            - const: dsi
+            - const: parent
+    else:
+      properties:
+        clocks:
+          items:
+            - description: DSI module clock
+            - description: low-power module clock
+            - description: input for the pixel clock
+
+        clock-names:
+          items:
+            - const: dsi
+            - const: lp
+            - const: parent
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra186-dsi
+    then:
+      required:
+        - interrupts
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    dsi@15300000 {
+        compatible = "nvidia,tegra186-dsi";
+        reg = <0x15300000 0x10000>;
+        interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bpmp TEGRA186_CLK_DSI>,
+                 <&bpmp TEGRA186_CLK_DSIA_LP>,
+                 <&bpmp TEGRA186_CLK_PLLD>;
+        clock-names = "dsi", "lp", "parent";
+        resets = <&bpmp TEGRA186_RESET_DSI>;
+        reset-names = "dsi";
+
+        power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml
new file mode 100644
index 000000000000..3c095a5491fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-epp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Encoder Pre-Processor
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^epp@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-epp
+      - nvidia,tegra30-epp
+      - nvidia,tegra114-epp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: epp
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    maxItems: 4
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    epp@540c0000 {
+        compatible = "nvidia,tegra20-epp";
+        reg = <0x540c0000 0x00040000>;
+        interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_EPP>;
+        resets = <&tegra_car 19>;
+        reset-names = "epp";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml
new file mode 100644
index 000000000000..1026b0bc3dc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr2d.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA 2D graphics engine
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^gr2d@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-gr2d
+      - nvidia,tegra30-gr2d
+      - nvidia,tegra114-gr2d
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+      - description: memory client hotflush reset
+
+  reset-names:
+    items:
+      - const: 2d
+      - const: mc
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 4
+
+  interconnect-names:
+    maxItems: 4
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the HEG or core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra20-mc.h>
+
+    gr2d@54140000 {
+        compatible = "nvidia,tegra20-gr2d";
+        reg = <0x54140000 0x00040000>;
+        interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+        resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+        reset-names = "2d", "mc";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml
new file mode 100644
index 000000000000..59a52e732ca3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-gr3d.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-gr3d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA 3D graphics engine
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^gr3d@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-gr3d
+      - nvidia,tegra30-gr3d
+      - nvidia,tegra114-gr3d
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    minItems: 2
+    maxItems: 4
+
+  reset-names:
+    minItems: 2
+    maxItems: 4
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  interconnects:
+    minItems: 4
+    maxItems: 10
+
+  interconnect-names:
+    minItems: 4
+    maxItems: 10
+
+  operating-points-v2: true
+
+  power-domains:
+    minItems: 1
+    maxItems: 2
+
+  power-domain-names:
+    maxItems: 2
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra20-gr2d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+
+        clock-names:
+          items:
+            - const: 3d
+
+        resets:
+          items:
+            - description: module reset
+            - description: memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: mc
+
+        iommus:
+          maxItems: 1
+
+        interconnects:
+          minItems: 4
+          maxItems: 4
+
+        interconnect-names:
+          minItems: 4
+          maxItems: 4
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra30-gr3d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary module clock
+            - description: secondary module clock
+
+        clock-names:
+          items:
+            - const: 3d
+            - const: 3d2
+
+        resets:
+          items:
+            - description: primary module reset
+            - description: secondary module reset
+            - description: primary memory client hotflush reset
+            - description: secondary memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: 3d2
+            - const: mc
+            - const: mc2
+
+        iommus:
+          minItems: 2
+          maxItems: 2
+
+        interconnects:
+          minItems: 8
+          maxItems: 8
+
+        interconnect-names:
+          minItems: 8
+          maxItems: 8
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+            - description: phandle to the TD2 power domain
+
+        power-domain-names:
+          items:
+            - const: 3d0
+            - const: 3d1
+
+      dependencies:
+        power-domains: [ power-domain-names ]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra114-gr2d
+    then:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+
+        clock-names:
+          items:
+            - const: 3d
+
+        resets:
+          items:
+            - description: module reset
+            - description: memory client hotflush reset
+
+        reset-names:
+          items:
+            - const: 3d
+            - const: mc
+
+        iommus:
+          maxItems: 1
+
+        interconnects:
+          minItems: 10
+          maxItems: 10
+
+        interconnect-names:
+          minItems: 10
+          maxItems: 10
+
+        power-domains:
+          items:
+            - description: phandle to the TD power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/memory/tegra20-mc.h>
+
+    gr3d@54180000 {
+        compatible = "nvidia,tegra20-gr3d";
+        reg = <0x54180000 0x00040000>;
+        clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+        resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+        reset-names = "3d", "mc";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
new file mode 100644
index 000000000000..f77197e4869f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra HDMI Output Encoder
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^hdmi@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-hdmi
+          - nvidia,tegra30-hdmi
+          - nvidia,tegra114-hdmi
+          - nvidia,tegra124-hdmi
+
+      - items:
+          - const: nvidia,tegra132-hdmi
+          - const: nvidia,tegra124-hdmi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+      - description: parent clock
+
+  clock-names:
+    items:
+      - const: hdmi
+      - const: parent
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: hdmi
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  hdmi-supply:
+    description: supply for the +5V HDMI connector pin
+
+  vdd-supply:
+    description: regulator for supply voltage
+
+  pll-supply:
+    description: regulator for PLL
+
+  nvidia,ddc-i2c-bus:
+    description: phandle of an I2C controller used for DDC EDID
+      probing
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvidia,hpd-gpio:
+    description: specifies a GPIO used for hotplug detection
+    maxItems: 1
+
+  nvidia,edid:
+    description: supplies a binary EDID blob
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  nvidia,panel:
+    description: phandle of a display panel
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  "#sound-dai-cells":
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - pll-supply
+  - vdd-supply
+  - nvidia,ddc-i2c-bus
+  - nvidia,hpd-gpio
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+
+    hdmi@54280000 {
+        compatible = "nvidia,tegra124-hdmi";
+        reg = <0x54280000 0x00040000>;
+        interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_HDMI>,
+                 <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>;
+        clock-names = "hdmi", "parent";
+        resets = <&tegra_car 51>;
+        reset-names = "hdmi";
+
+        hdmi-supply = <&vdd_5v0_hdmi>;
+        pll-supply = <&vdd_hdmi_pll>;
+        vdd-supply = <&vdd_3v3_hdmi>;
+
+        nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+        nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
deleted file mode 100644
index 8a6d3e1ee306..000000000000
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ /dev/null
@@ -1,622 +0,0 @@
-NVIDIA Tegra host1x
-
-Required properties:
-- compatible: "nvidia,tegra<chip>-host1x"
-- reg: Physical base address and length of the controller's registers.
-  For pre-Tegra186, one entry describing the whole register area.
-  For Tegra186, one entry for each entry in reg-names:
-    "vm" - VM region assigned to Linux
-    "hypervisor" - Hypervisor region (only if Linux acts as hypervisor)
-- interrupts: The interrupt outputs from the controller.
-- #address-cells: The number of cells used to represent physical base addresses
-  in the host1x address space. Should be 1.
-- #size-cells: The number of cells used to represent the size of an address
-  range in the host1x address space. Should be 1.
-- ranges: The mapping of the host1x address space to the CPU address space.
-- clocks: Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - host1x
-
-Each host1x client module having to perform DMA through the Memory Controller
-should have the interconnect endpoints set to the Memory Client and External
-Memory respectively.
-
-The host1x top-level node defines a number of children, each representing one
-of the following host1x client modules:
-
-- mpe: video encoder
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-mpe"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - mpe
-
-  Optional properties:
-  - interconnects: Must contain entry for the MPE memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-- vi: video input
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-vi"
-  - reg: Physical base address and length of the controller registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - Tegra20/Tegra30/Tegra114/Tegra124:
-    - resets: Must contain an entry for each entry in reset-names.
-      See ../reset/reset.txt for details.
-    - reset-names: Must include the following entries:
-      - vi
-  - Tegra210:
-    - power-domains: Must include venc powergate node as vi is in VE partition.
-
-  ports (optional node)
-  vi can have optional ports node and max 6 ports are supported. Each port
-  should have single 'endpoint' child node. All port nodes are grouped under
-  ports node. Please refer to the bindings defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt
-
-  csi (required node)
-  Tegra210 has CSI part of VI sharing same host interface and register space.
-  So, VI device node should have CSI child node.
-
-    - csi: mipi csi interface to vi
-
-      Required properties:
-      - compatible: "nvidia,tegra210-csi"
-      - reg: Physical base address offset to parent and length of the controller
-        registers.
-      - clocks: Must contain entries csi, cilab, cilcd, cile, csi_tpg clocks.
-        See ../clocks/clock-bindings.txt for details.
-      - power-domains: Must include sor powergate node as csicil is in
-        SOR partition.
-
-      channel (optional nodes)
-      Maximum 6 channels are supported with each csi brick as either x4 or x2
-      based on hw connectivity to sensor.
-
-      Required properties:
-      - reg: csi port number. Valid port numbers are 0 through 5.
-      - nvidia,mipi-calibrate: Should contain a phandle and a specifier
-        specifying which pads are used by this CSI port and need to be
-	calibrated. See also ../display/tegra/nvidia,tegra114-mipi.txt.
-
-      Each channel node must contain 2 port nodes which can be grouped
-      under 'ports' node and each port should have a single child 'endpoint'
-      node.
-
-        ports node
-        Please refer to the bindings defined in
-        Documentation/devicetree/bindings/media/video-interfaces.txt
-
-        ports node must contain below 2 port nodes.
-        port@0 with single child 'endpoint' node always a sink.
-        port@1 with single child 'endpoint' node always a source.
-
-        port@0 (required node)
-        Required properties:
-        - reg: 0
-
-	  endpoint (required node)
-	  Required properties:
-	  - data-lanes: an array of data lane from 1 to 8. Valid array
-	    lengths are 1/2/4/8.
-	  - remote-endpoint: phandle to sensor 'endpoint' node.
-
-        port@1 (required node)
-        Required properties:
-        - reg: 1
-
-	  endpoint (required node)
-	  Required properties:
-	  - remote-endpoint: phandle to vi port 'endpoint' node.
-
-  Optional properties:
-  - interconnects: Must contain entry for the VI memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-- epp: encoder pre-processor
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-epp"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - epp
-
-  Optional properties:
-  - interconnects: Must contain entry for the EPP memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-- isp: image signal processor
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-isp"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - isp
-
-  Optional properties:
-  - interconnects: Must contain entry for the ISP memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-- gr2d: 2D graphics engine
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-gr2d"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - 2d
-
-  Optional properties:
-  - interconnects: Must contain entry for the GR2D memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-- gr3d: 3D graphics engine
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-gr3d"
-  - reg: Physical base address and length of the controller's registers.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    (This property may be omitted if the only clock in the list is "3d")
-    - 3d
-      This MUST be the first entry.
-    - 3d2 (Only required on SoCs with two 3D clocks)
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - 3d
-    - 3d2 (Only required on SoCs with two 3D clocks)
-
-  Optional properties:
-  - interconnects: Must contain entry for the GR3D memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-- dc: display controller
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-dc"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - dc
-      This MUST be the first entry.
-    - parent
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - dc
-  - nvidia,head: The number of the display controller head. This is used to
-    setup the various types of output to receive video data from the given
-    head.
-
-  Each display controller node has a child node, named "rgb", that represents
-  the RGB output associated with the controller. It can take the following
-  optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - interconnects: Must contain entry for the DC memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-- hdmi: High Definition Multimedia Interface
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-hdmi"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - hdmi-supply: supply for the +5V HDMI connector pin
-  - vdd-supply: regulator for supply voltage
-  - pll-supply: regulator for PLL
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - hdmi
-      This MUST be the first entry.
-    - parent
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - hdmi
-
-  Optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-
-- tvo: TV encoder output
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-tvo"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain one entry, for the module clock.
-    See ../clocks/clock-bindings.txt for details.
-
-- dsi: display serial interface
-
-  Required properties:
-  - compatible: "nvidia,tegra<chip>-dsi"
-  - reg: Physical base address and length of the controller's registers.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - dsi
-      This MUST be the first entry.
-    - lp
-    - parent
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - dsi
-  - avdd-dsi-supply: phandle of a supply that powers the DSI controller
-  - nvidia,mipi-calibrate: Should contain a phandle and a specifier specifying
-    which pads are used by this DSI output and need to be calibrated. See also
-    ../display/tegra/nvidia,tegra114-mipi.txt.
-
-  Optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - nvidia,ganged-mode: contains a phandle to a second DSI controller to gang
-    up with in order to support up to 8 data lanes
-
-- sor: serial output resource
-
-  Required properties:
-  - compatible: Should be:
-    - "nvidia,tegra124-sor": for Tegra124 and Tegra132
-    - "nvidia,tegra132-sor": for Tegra132
-    - "nvidia,tegra210-sor": for Tegra210
-    - "nvidia,tegra210-sor1": for Tegra210
-    - "nvidia,tegra186-sor": for Tegra186
-    - "nvidia,tegra186-sor1": for Tegra186
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - sor: clock input for the SOR hardware
-    - out: SOR output clock
-    - parent: input for the pixel clock
-    - dp: reference clock for the SOR clock
-    - safe: safe reference for the SOR clock during power up
-
-    For Tegra186 and later:
-    - pad: SOR pad output clock (on Tegra186 and later)
-
-    Obsolete:
-    - source: source clock for the SOR clock (obsolete, use "out" instead)
-
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - sor
-
-  Required properties on Tegra186 and later:
-  - nvidia,interface: index of the SOR interface
-
-  Optional properties:
-  - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-  - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
-  - nvidia,edid: supplies a binary EDID blob
-  - nvidia,panel: phandle of a display panel
-  - nvidia,xbar-cfg: 5 cells containing the crossbar configuration. Each lane
-    of the SOR, identified by the cell's index, is mapped via the crossbar to
-    the pad specified by the cell's value.
-
-  Optional properties when driving an eDP output:
-  - nvidia,dpaux: phandle to a DispayPort AUX interface
-
-- dpaux: DisplayPort AUX interface
-  - compatible : Should contain one of the following:
-    - "nvidia,tegra124-dpaux": for Tegra124 and Tegra132
-    - "nvidia,tegra210-dpaux": for Tegra210
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - dpaux: clock input for the DPAUX hardware
-    - parent: reference clock
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - dpaux
-  - vdd-supply: phandle of a supply that powers the DisplayPort link
-  - i2c-bus: Subnode where I2C slave devices are listed. This subnode
-    must be always present. If there are no I2C slave devices, an empty
-    node should be added. See ../../i2c/i2c.txt for more information.
-
-  See ../pinctrl/nvidia,tegra124-dpaux-padctl.txt for information
-  regarding the DPAUX pad controller bindings.
-
-- vic: Video Image Compositor
-  - compatible : "nvidia,tegra<chip>-vic"
-  - reg: Physical base address and length of the controller's registers.
-  - interrupts: The interrupt outputs from the controller.
-  - clocks: Must contain an entry for each entry in clock-names.
-    See ../clocks/clock-bindings.txt for details.
-  - clock-names: Must include the following entries:
-    - vic: clock input for the VIC hardware
-  - resets: Must contain an entry for each entry in reset-names.
-    See ../reset/reset.txt for details.
-  - reset-names: Must include the following entries:
-    - vic
-
-  Optional properties:
-  - interconnects: Must contain entry for the VIC memory clients.
-  - interconnect-names: Must include name of the interconnect path for each
-    interconnect entry. Consult TRM documentation for information about
-    available memory clients, see MEMORY CONTROLLER section.
-
-Example:
-
-/ {
-	...
-
-	host1x {
-		compatible = "nvidia,tegra20-host1x", "simple-bus";
-		reg = <0x50000000 0x00024000>;
-		interrupts = <0 65 0x04   /* mpcore syncpt */
-			      0 67 0x04>; /* mpcore general */
-		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
-		resets = <&tegra_car 28>;
-		reset-names = "host1x";
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		ranges = <0x54000000 0x54000000 0x04000000>;
-
-		mpe {
-			compatible = "nvidia,tegra20-mpe";
-			reg = <0x54040000 0x00040000>;
-			interrupts = <0 68 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_MPE>;
-			resets = <&tegra_car 60>;
-			reset-names = "mpe";
-		};
-
-		vi@54080000 {
-			compatible = "nvidia,tegra210-vi";
-			reg = <0x0 0x54080000 0x0 0x700>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
-			assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
-
-			clocks = <&tegra_car TEGRA210_CLK_VI>;
-			power-domains = <&pd_venc>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			ranges = <0x0 0x0 0x54080000 0x2000>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					imx219_vi_in0: endpoint {
-						remote-endpoint = <&imx219_csi_out0>;
-					};
-				};
-			};
-
-			csi@838 {
-				compatible = "nvidia,tegra210-csi";
-				reg = <0x838 0x1300>;
-				assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
-						  <&tegra_car TEGRA210_CLK_CILCD>,
-						  <&tegra_car TEGRA210_CLK_CILE>,
-						  <&tegra_car TEGRA210_CLK_CSI_TPG>;
-				assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
-							 <&tegra_car TEGRA210_CLK_PLL_P>,
-							 <&tegra_car TEGRA210_CLK_PLL_P>;
-				assigned-clock-rates = <102000000>,
-						       <102000000>,
-						       <102000000>,
-						       <972000000>;
-
-				clocks = <&tegra_car TEGRA210_CLK_CSI>,
-					 <&tegra_car TEGRA210_CLK_CILAB>,
-					 <&tegra_car TEGRA210_CLK_CILCD>,
-					 <&tegra_car TEGRA210_CLK_CILE>,
-					 <&tegra_car TEGRA210_CLK_CSI_TPG>;
-				clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
-				power-domains = <&pd_sor>;
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				channel@0 {
-					reg = <0>;
-					nvidia,mipi-calibrate = <&mipi 0x001>;
-
-					ports {
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						port@0 {
-							reg = <0>;
-							imx219_csi_in0: endpoint {
-								data-lanes = <1 2>;
-								remote-endpoint = <&imx219_out0>;
-							};
-						};
-
-						port@1 {
-							reg = <1>;
-							imx219_csi_out0: endpoint {
-								remote-endpoint = <&imx219_vi_in0>;
-							};
-						};
-					};
-				};
-			};
-		};
-
-		epp {
-			compatible = "nvidia,tegra20-epp";
-			reg = <0x540c0000 0x00040000>;
-			interrupts = <0 70 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_EPP>;
-			resets = <&tegra_car 19>;
-			reset-names = "epp";
-		};
-
-		isp {
-			compatible = "nvidia,tegra20-isp";
-			reg = <0x54100000 0x00040000>;
-			interrupts = <0 71 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_ISP>;
-			resets = <&tegra_car 23>;
-			reset-names = "isp";
-		};
-
-		gr2d {
-			compatible = "nvidia,tegra20-gr2d";
-			reg = <0x54140000 0x00040000>;
-			interrupts = <0 72 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
-			resets = <&tegra_car 21>;
-			reset-names = "2d";
-		};
-
-		gr3d {
-			compatible = "nvidia,tegra20-gr3d";
-			reg = <0x54180000 0x00040000>;
-			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
-			resets = <&tegra_car 24>;
-			reset-names = "3d";
-		};
-
-		dc@54200000 {
-			compatible = "nvidia,tegra20-dc";
-			reg = <0x54200000 0x00040000>;
-			interrupts = <0 73 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_DISP1>,
-				 <&tegra_car TEGRA20_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 27>;
-			reset-names = "dc";
-
-			interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>,
-					<&mc TEGRA20_MC_DISPLAY0B &emc>,
-					<&mc TEGRA20_MC_DISPLAY0C &emc>,
-					<&mc TEGRA20_MC_DISPLAYHC &emc>;
-			interconnect-names = "wina",
-					     "winb",
-					     "winc",
-					     "cursor";
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		dc@54240000 {
-			compatible = "nvidia,tegra20-dc";
-			reg = <0x54240000 0x00040000>;
-			interrupts = <0 74 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_DISP2>,
-				 <&tegra_car TEGRA20_CLK_PLL_P>;
-			clock-names = "dc", "parent";
-			resets = <&tegra_car 26>;
-			reset-names = "dc";
-
-			interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>,
-					<&mc TEGRA20_MC_DISPLAY0BB &emc>,
-					<&mc TEGRA20_MC_DISPLAY0CB &emc>,
-					<&mc TEGRA20_MC_DISPLAYHCB &emc>;
-			interconnect-names = "wina",
-					     "winb",
-					     "winc",
-					     "cursor";
-
-			rgb {
-				status = "disabled";
-			};
-		};
-
-		hdmi {
-			compatible = "nvidia,tegra20-hdmi";
-			reg = <0x54280000 0x00040000>;
-			interrupts = <0 75 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_HDMI>,
-				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
-			clock-names = "hdmi", "parent";
-			resets = <&tegra_car 51>;
-			reset-names = "hdmi";
-			status = "disabled";
-		};
-
-		tvo {
-			compatible = "nvidia,tegra20-tvo";
-			reg = <0x542c0000 0x00040000>;
-			interrupts = <0 76 0x04>;
-			clocks = <&tegra_car TEGRA20_CLK_TVO>;
-			status = "disabled";
-		};
-
-		dsi {
-			compatible = "nvidia,tegra20-dsi";
-			reg = <0x54300000 0x00040000>;
-			clocks = <&tegra_car TEGRA20_CLK_DSI>,
-				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
-			clock-names = "dsi", "parent";
-			resets = <&tegra_car 48>;
-			reset-names = "dsi";
-			status = "disabled";
-		};
-	};
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
new file mode 100644
index 000000000000..94c5242c03b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
@@ -0,0 +1,430 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-host1x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra host1x controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The host1x top-level node defines a number of children, each
+  representing one of the host1x client modules defined in this binding.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-host1x
+          - nvidia,tegra30-host1x
+          - nvidia,tegra114-host1x
+          - nvidia,tegra124-host1x
+          - nvidia,tegra210-host1x
+          - nvidia,tegra186-host1x
+          - nvidia,tegra194-host1x
+          - nvidia,tegra234-host1x
+
+      - items:
+          - const: nvidia,tegra132-host1x
+          - const: nvidia,tegra124-host1x
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    maxItems: 3
+
+  interrupts:
+    minItems: 1
+    maxItems: 9
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 9
+
+  '#address-cells':
+    description: The number of cells used to represent physical base addresses
+      in the host1x address space.
+    enum: [1, 2]
+
+  '#size-cells':
+    description: The number of cells used to represent the size of an address
+      range in the host1x address space.
+    enum: [1, 2]
+
+  ranges:
+    maxItems: 1
+
+  clocks:
+    description: Must contain one entry, for the module clock. See
+      ../clocks/clock-bindings.txt for details.
+
+  clock-names:
+    items:
+      - const: host1x
+
+  resets:
+    minItems: 1 # MC reset is optional on Tegra186 and later
+    items:
+      - description: module reset
+      - description: memory client hotflush reset
+
+  reset-names:
+    minItems: 1 # MC reset is optional on Tegra186 and later
+    items:
+      - const: host1x
+      - const: mc
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory read client for host1x
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the HEG or core power domain
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - '#address-cells'
+  - '#size-cells'
+  - ranges
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties:
+  type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-host1x
+              - nvidia,tegra30-host1x
+              - nvidia,tegra114-host1x
+              - nvidia,tegra124-host1x
+              - nvidia,tegra210-host1x
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: host1x syncpoint interrupt
+            - description: host1x general interrupt
+
+        interrupt-names:
+          items:
+            - const: syncpt
+            - const: host1x
+      required:
+        - resets
+        - reset-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-host1x
+              - nvidia,tegra194-host1x
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: hypervisor
+            - const: vm
+
+        reg:
+          items:
+            - description: region used by the hypervisor
+            - description: region assigned to the virtual machine
+
+        resets:
+          maxItems: 1
+
+        reset-names:
+          maxItems: 1
+
+        interrupts:
+          items:
+            - description: host1x syncpoint interrupt
+            - description: host1x general interrupt
+
+        interrupt-names:
+          items:
+            - const: syncpt
+            - const: host1x
+
+        iommu-map:
+          description: Specification of stream IDs available for memory context device
+            use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to
+            usable stream IDs.
+
+      required:
+        - reg-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-host1x
+    then:
+      properties:
+        reg-names:
+          items:
+            - const: common
+            - const: hypervisor
+            - const: vm
+
+        reg:
+          items:
+            - description: region used by host1x server
+            - description: region used by the hypervisor
+            - description: region assigned to the virtual machine
+
+        interrupts:
+          items:
+            - description: host1x syncpoint interrupt 0
+            - description: host1x syncpoint interrupt 1
+            - description: host1x syncpoint interrupt 2
+            - description: host1x syncpoint interrupt 3
+            - description: host1x syncpoint interrupt 4
+            - description: host1x syncpoint interrupt 5
+            - description: host1x syncpoint interrupt 6
+            - description: host1x syncpoint interrupt 7
+            - description: host1x general interrupt
+
+        interrupt-names:
+          items:
+            - const: syncpt0
+            - const: syncpt1
+            - const: syncpt2
+            - const: syncpt3
+            - const: syncpt4
+            - const: syncpt5
+            - const: syncpt6
+            - const: syncpt7
+            - const: host1x
+
+        iommu-map:
+          description: Specification of stream IDs available for memory context device
+            use. Should be a mapping of IDs 0..n to IOMMU entries corresponding to
+            usable stream IDs.
+
+      required:
+        - reg-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/gpio/tegra-gpio.h>
+    #include <dt-bindings/memory/tegra20-mc.h>
+
+    host1x@50000000 {
+        compatible = "nvidia,tegra20-host1x";
+        reg = <0x50000000 0x00024000>;
+        interrupts = <0 65 0x04>, /* mpcore syncpt */
+                     <0 67 0x04>; /* mpcore general */
+        interrupt-names = "syncpt", "host1x";
+        clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+        clock-names = "host1x";
+        resets = <&tegra_car 28>, <&mc TEGRA20_MC_RESET_HC>;
+        reset-names = "host1x", "mc";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x54000000 0x54000000 0x04000000>;
+
+        mpe@54040000 {
+            compatible = "nvidia,tegra20-mpe";
+            reg = <0x54040000 0x00040000>;
+            interrupts = <0 68 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_MPE>;
+            resets = <&tegra_car 60>;
+            reset-names = "mpe";
+        };
+
+        vi@54080000 {
+            compatible = "nvidia,tegra20-vi";
+            reg = <0x54080000 0x00040000>;
+            interrupts = <0 69 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_VI>;
+            resets = <&tegra_car 100>;
+            reset-names = "vi";
+        };
+
+        epp@540c0000 {
+            compatible = "nvidia,tegra20-epp";
+            reg = <0x540c0000 0x00040000>;
+            interrupts = <0 70 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_EPP>;
+            resets = <&tegra_car 19>;
+            reset-names = "epp";
+        };
+
+        isp@54100000 {
+            compatible = "nvidia,tegra20-isp";
+            reg = <0x54100000 0x00040000>;
+            interrupts = <0 71 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_ISP>;
+            resets = <&tegra_car 23>;
+            reset-names = "isp";
+        };
+
+        gr2d@54140000 {
+            compatible = "nvidia,tegra20-gr2d";
+            reg = <0x54140000 0x00040000>;
+            interrupts = <0 72 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+            resets = <&tegra_car 21>, <&mc TEGRA20_MC_RESET_2D>;
+            reset-names = "2d", "mc";
+        };
+
+        gr3d@54180000 {
+            compatible = "nvidia,tegra20-gr3d";
+            reg = <0x54180000 0x00040000>;
+            clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+            resets = <&tegra_car 24>, <&mc TEGRA20_MC_RESET_3D>;
+            reset-names = "3d", "mc";
+        };
+
+        dc@54200000 {
+            compatible = "nvidia,tegra20-dc";
+            reg = <0x54200000 0x00040000>;
+            interrupts = <0 73 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_DISP1>;
+            clock-names = "dc";
+            resets = <&tegra_car 27>;
+            reset-names = "dc";
+
+            rgb {
+            };
+        };
+
+        dc@54240000 {
+            compatible = "nvidia,tegra20-dc";
+            reg = <0x54240000 0x00040000>;
+            interrupts = <0 74 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_DISP2>;
+            clock-names = "dc";
+            resets = <&tegra_car 26>;
+            reset-names = "dc";
+
+            rgb {
+            };
+        };
+
+        hdmi@54280000 {
+            compatible = "nvidia,tegra20-hdmi";
+            reg = <0x54280000 0x00040000>;
+            interrupts = <0 75 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+                     <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+            clock-names = "hdmi", "parent";
+            resets = <&tegra_car 51>;
+            reset-names = "hdmi";
+
+            hdmi-supply = <&vdd_5v0_hdmi>;
+            pll-supply = <&vdd_hdmi_pll>;
+            vdd-supply = <&vdd_3v3_hdmi>;
+
+            nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+            nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+        };
+
+        tvo@542c0000 {
+            compatible = "nvidia,tegra20-tvo";
+            reg = <0x542c0000 0x00040000>;
+            interrupts = <0 76 0x04>;
+            clocks = <&tegra_car TEGRA20_CLK_TVO>;
+        };
+
+        dsi@54300000 {
+            compatible = "nvidia,tegra20-dsi";
+            reg = <0x54300000 0x00040000>;
+            clocks = <&tegra_car TEGRA20_CLK_DSI>,
+                     <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+            clock-names = "dsi", "parent";
+            resets = <&tegra_car 48>;
+            reset-names = "dsi";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra210-mc.h>
+
+    host1x@50000000 {
+        compatible = "nvidia,tegra210-host1x";
+        reg = <0x50000000 0x00024000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* mpcore syncpt */
+                     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* mpcore general */
+        interrupt-names = "syncpt", "host1x";
+        clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
+        clock-names = "host1x";
+        resets = <&tegra_car 28>;
+        reset-names = "host1x";
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x54000000 0x54000000 0x01000000>;
+        iommus = <&mc TEGRA_SWGROUP_HC>;
+
+        vi@54080000 {
+            compatible = "nvidia,tegra210-vi";
+            reg = <0x54080000 0x00000700>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+            clocks = <&tegra_car TEGRA210_CLK_VI>;
+            power-domains = <&pd_venc>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            ranges = <0x0 0x54080000 0x2000>;
+
+            csi@838 {
+                compatible = "nvidia,tegra210-csi";
+                reg = <0x838 0x1300>;
+                assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+                                  <&tegra_car TEGRA210_CLK_CILCD>,
+                                  <&tegra_car TEGRA210_CLK_CILE>,
+                                  <&tegra_car TEGRA210_CLK_CSI_TPG>;
+                assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+                                         <&tegra_car TEGRA210_CLK_PLL_P>,
+                                         <&tegra_car TEGRA210_CLK_PLL_P>;
+                assigned-clock-rates = <102000000>,
+                                       <102000000>,
+                                       <102000000>,
+                                       <972000000>;
+
+                clocks = <&tegra_car TEGRA210_CLK_CSI>,
+                         <&tegra_car TEGRA210_CLK_CILAB>,
+                         <&tegra_car TEGRA210_CLK_CILCD>,
+                         <&tegra_car TEGRA210_CLK_CILE>,
+                         <&tegra_car TEGRA210_CLK_CSI_TPG>;
+                clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+                power-domains = <&pd_sor>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml
new file mode 100644
index 000000000000..3bc3b22e98e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra ISP processor
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra20-isp
+      - nvidia,tegra30-isp
+      - nvidia,tegra210-isp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: isp
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # write
+
+  power-domains:
+    items:
+      - description: phandle to the VENC or core power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    isp@54100000 {
+        compatible = "nvidia,tegra20-isp";
+        reg = <0x54100000 0x00040000>;
+        interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_ISP>;
+        resets = <&tegra_car 23>;
+        reset-names = "isp";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml
new file mode 100644
index 000000000000..2cd3e60cd0a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-mpe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Encoder
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^mpe@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-mpe
+      - nvidia,tegra30-mpe
+      - nvidia,tegra114-mpe
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: mpe
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    maxItems: 6
+
+  interconnect-names:
+    maxItems: 6
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the MPE power domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mpe@54040000 {
+        compatible = "nvidia,tegra20-mpe";
+        reg = <0x54040000 0x00040000>;
+        interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_MPE>;
+        resets = <&tegra_car 60>;
+        reset-names = "mpe";
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml
new file mode 100644
index 000000000000..6c84d8b7eb7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-tvo.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-tvo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra TV Encoder Output
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^tvo@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra20-tvo
+      - nvidia,tegra30-tvo
+      - nvidia,tegra114-tvo
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tvo@542c0000 {
+        compatible = "nvidia,tegra20-tvo";
+        reg = <0x542c0000 0x00040000>;
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_TVO>;
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
new file mode 100644
index 000000000000..a42bf33d1e7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-vi.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-vi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Input controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^vi@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra20-vi
+      - const: nvidia,tegra30-vi
+      - const: nvidia,tegra114-vi
+      - const: nvidia,tegra124-vi
+      - items:
+          - const: nvidia,tegra132-vi
+          - const: nvidia,tegra124-vi
+      - const: nvidia,tegra210-vi
+      - const: nvidia,tegra186-vi
+      - const: nvidia,tegra194-vi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: vi
+
+  iommus:
+    maxItems: 1
+
+  interconnects:
+    minItems: 4
+    maxItems: 5
+
+  interconnect-names:
+    minItems: 4
+    maxItems: 5
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the VENC power domain
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+  avdd-dsi-csi-supply:
+    description: DSI/CSI power supply. Must supply 1.2 V.
+
+patternProperties:
+  "^csi@[0-9a-f]+$":
+    type: object
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-vi
+              - nvidia,tegra30-vi
+              - nvidia,tegra114-vi
+              - nvidia,tegra124-vi
+    then:
+      required:
+        - resets
+        - reset-names
+    else:
+      required:
+        - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vi@54080000 {
+        compatible = "nvidia,tegra20-vi";
+        reg = <0x54080000 0x00040000>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA20_CLK_VI>;
+        resets = <&tegra_car 100>;
+        reset-names = "vi";
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    vi@54080000 {
+        compatible = "nvidia,tegra210-vi";
+        reg = <0x54080000 0x00000700>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        assigned-clocks = <&tegra_car TEGRA210_CLK_VI>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+
+        clocks = <&tegra_car TEGRA210_CLK_VI>;
+        power-domains = <&pd_venc>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ranges = <0x0 0x54080000 0x2000>;
+
+        csi@838 {
+            compatible = "nvidia,tegra210-csi";
+            reg = <0x838 0x1300>;
+            assigned-clocks = <&tegra_car TEGRA210_CLK_CILAB>,
+                              <&tegra_car TEGRA210_CLK_CILCD>,
+                              <&tegra_car TEGRA210_CLK_CILE>,
+                              <&tegra_car TEGRA210_CLK_CSI_TPG>;
+            assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_P>,
+                                     <&tegra_car TEGRA210_CLK_PLL_P>,
+                                     <&tegra_car TEGRA210_CLK_PLL_P>;
+            assigned-clock-rates = <102000000>,
+                                   <102000000>,
+                                   <102000000>,
+                                   <972000000>;
+
+            clocks = <&tegra_car TEGRA210_CLK_CSI>,
+                     <&tegra_car TEGRA210_CLK_CILAB>,
+                     <&tegra_car TEGRA210_CLK_CILCD>,
+                     <&tegra_car TEGRA210_CLK_CILE>,
+                     <&tegra_car TEGRA210_CLK_CSI_TPG>;
+            clock-names = "csi", "cilab", "cilcd", "cile", "csi_tpg";
+            power-domains = <&pd_sor>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
new file mode 100644
index 000000000000..fa07a40d1004
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra210-csi.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra210-csi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra CSI controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^csi@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-csi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: module clock
+      - description: A/B lanes clock
+      - description: C/D lanes clock
+      - description: E lane clock
+      - description: test pattern generator clock
+
+  clock-names:
+    items:
+      - const: csi
+      - const: cilab
+      - const: cilcd
+      - const: cile
+      - const: csi_tpg
+
+  power-domains:
+    maxItems: 1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+# see nvidia,tegra20-vi.yaml for an example
diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
index 781c1868b0b8..b6b402f16161 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/ti/ti,am65x-dss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Texas Instruments AM65x Display Subsystem
 
@@ -88,8 +88,7 @@ properties:
           The DSS DPI output port node from video port 2
 
   ti,am65x-oldi-io-ctrl:
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
-    maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       phandle to syscon device node mapping OLDI IO_CTRL registers.
       The mapped range should point to OLDI_DAT0_IO_CTRL, map it and
diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
index 2986f9acc9f0..fad7cba58d39 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/ti/ti,j721e-dss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Texas Instruments J721E Display Subsystem
 
diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
index 7ce7bbad5780..96b1439f88e3 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/display/ti/ti,k2g-dss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Texas Instruments K2G Display Subsystem
 
diff --git a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
index 3e64075ac7ec..3b3d0bbfcfff 100644
--- a/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
+++ b/Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt
@@ -60,7 +60,7 @@ Example:
 		blue-and-red-wiring = "crossed";
 
 		port {
-			lcdc_0: endpoint@0 {
+			lcdc_0: endpoint {
 				remote-endpoint = <&hdmi_0>;
 			};
 		};
@@ -75,7 +75,7 @@ Example:
 		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
 
 		port {
-			hdmi_0: endpoint@0 {
+			hdmi_0: endpoint {
 				remote-endpoint = <&lcdc_0>;
 			};
 		};
diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
index d88bd93f4b80..554f9d5809d4 100644
--- a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
+++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml
@@ -117,6 +117,45 @@ properties:
       - const: dp-phy0
       - const: dp-phy1
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Connections to the programmable logic and the DisplayPort PHYs. Each port
+      shall have a single endpoint.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The live video input from the programmable logic
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The live graphics input from the programmable logic
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The live audio input from the programmable logic
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The blended video output to the programmable logic
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The mixed audio output to the programmable logic
+
+      port@5:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: The DisplayPort output
+
+    required:
+      - port@0
+      - port@1
+      - port@2
+      - port@3
+      - port@4
+      - port@5
+
 required:
   - compatible
   - reg
@@ -130,6 +169,7 @@ required:
   - dma-names
   - phys
   - phy-names
+  - ports
 
 additionalProperties: false
 
@@ -160,10 +200,37 @@ examples:
                <&xlnx_dpdma 2>,
                <&xlnx_dpdma 3>;
 
-        phys = <&psgtr 1 PHY_TYPE_DP 0 3 27000000>,
-               <&psgtr 0 PHY_TYPE_DP 1 3 27000000>;
+        phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
+               <&psgtr 0 PHY_TYPE_DP 1 3>;
 
         phy-names = "dp-phy0", "dp-phy1";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+            };
+            port@1 {
+                reg = <1>;
+            };
+            port@2 {
+                reg = <2>;
+            };
+            port@3 {
+                reg = <3>;
+            };
+            port@4 {
+                reg = <4>;
+            };
+            port@5 {
+                reg = <5>;
+                dpsub_dp_out: endpoint {
+                    remote-endpoint = <&dp_connector>;
+                };
+            };
+        };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
new file mode 100644
index 000000000000..76b804b7c880
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
@@ -0,0 +1,301 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Bootlin
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/xylon,logicvc-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xylon LogiCVC display controller
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+description: |
+  The Xylon LogiCVC is a display controller that supports multiple layers.
+  It is usually implemented as programmable logic and was optimized for use
+  with Xilinx Zynq-7000 SoCs and Xilinx FPGAs.
+
+  Because the controller is intended for use in a FPGA, most of the
+  configuration of the controller takes place at logic configuration bitstream
+  synthesis time. As a result, many of the device-tree bindings are meant to
+  reflect the synthesis configuration and must not be configured differently.
+  Matching synthesis parameters are provided when applicable.
+
+  Layers are declared in the "layers" sub-node and have dedicated configuration.
+  In version 3 of the controller, each layer has fixed memory offset and address
+  starting from the video memory base address for its framebuffer. In version 4,
+  framebuffers are configured with a direct memory address instead.
+
+properties:
+  compatible:
+    enum:
+      - xylon,logicvc-3.02.a-display
+      - xylon,logicvc-4.01.a-display
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    items:
+      # vclk is required and must be provided as first item.
+      - const: vclk
+      # Other clocks are optional and can be provided in any order.
+      - enum:
+          - vclk2
+          - lvdsclk
+          - lvdsclkn
+      - enum:
+          - vclk2
+          - lvdsclk
+          - lvdsclkn
+      - enum:
+          - vclk2
+          - lvdsclk
+          - lvdsclkn
+
+  interrupts:
+    maxItems: 1
+
+  memory-region:
+    maxItems: 1
+
+  xylon,display-interface:
+    enum:
+      # Parallel RGB interface (C_DISPLAY_INTERFACE == 0)
+      - parallel-rgb
+      # ITU-T BR656 interface (C_DISPLAY_INTERFACE == 1)
+      - bt656
+      # 4-bit LVDS interface (C_DISPLAY_INTERFACE == 2)
+      - lvds-4bits
+      # 3-bit LVDS interface (C_DISPLAY_INTERFACE == 4)
+      - lvds-3bits
+      # DVI interface (C_DISPLAY_INTERFACE == 5)
+      - dvi
+    description: Display output interface (C_DISPLAY_INTERFACE).
+
+  xylon,display-colorspace:
+    enum:
+      # RGB colorspace (C_DISPLAY_COLOR_SPACE == 0)
+      - rgb
+      # YUV 4:2:2 colorspace (C_DISPLAY_COLOR_SPACE == 1)
+      - yuv422
+      # YUV 4:4:4 colorspace (C_DISPLAY_COLOR_SPACE == 2)
+      - yuv444
+    description: Display output colorspace (C_DISPLAY_COLOR_SPACE).
+
+  xylon,display-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Display output depth (C_PIXEL_DATA_WIDTH).
+
+  xylon,row-stride:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE).
+
+  xylon,dithering:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Dithering module is enabled (C_XCOLOR)
+
+  xylon,background-layer:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      The last layer is used to display a black background (C_USE_BACKGROUND).
+      The layer must still be registered.
+
+  xylon,layers-configurable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Configuration of layers' size, position and offset is enabled
+      (C_USE_SIZE_POSITION).
+
+  layers:
+    type: object
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^layer@[0-9]+$":
+        type: object
+
+        properties:
+          reg:
+            maxItems: 1
+
+          xylon,layer-depth:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: Layer depth (C_LAYER_X_DATA_WIDTH).
+
+          xylon,layer-colorspace:
+            enum:
+              # RGB colorspace (C_LAYER_X_TYPE == 0)
+              - rgb
+              # YUV packed colorspace (C_LAYER_X_TYPE == 0)
+              - yuv
+            description: Layer colorspace (C_LAYER_X_TYPE).
+
+          xylon,layer-alpha-mode:
+            enum:
+              # Alpha is configured layer-wide (C_LAYER_X_ALPHA_MODE == 0)
+              - layer
+              # Alpha is configured per-pixel (C_LAYER_X_ALPHA_MODE == 1)
+              - pixel
+            description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE).
+
+          xylon,layer-base-offset:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: |
+              Offset in number of lines (C_LAYER_X_OFFSET) starting from the
+              video RAM base (C_VMEM_BASEADDR), only for version 3.
+
+          xylon,layer-buffer-offset:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: |
+              Offset in number of lines (C_BUFFER_*_OFFSET) starting from the
+              layer base offset for the second buffer used in double-buffering.
+
+          xylon,layer-primary:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description: |
+              Layer should be registered as a primary plane (exactly one is
+              required).
+
+        additionalProperties: false
+
+        required:
+          - reg
+          - xylon,layer-depth
+          - xylon,layer-colorspace
+          - xylon,layer-alpha-mode
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+      - layer@0
+
+    additionalProperties: false
+
+    description: |
+      The description of the display controller layers, containing layer
+      sub-nodes that each describe a registered layer.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description: |
+      Video output port, typically connected to a panel or bridge.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - xylon,display-interface
+  - xylon,display-colorspace
+  - xylon,display-depth
+  - xylon,row-stride
+  - layers
+  - port
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    logicvc: logicvc@43c00000 {
+      compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd";
+      reg = <0x43c00000 0x6000>;
+
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      logicvc_display: display@0 {
+        compatible = "xylon,logicvc-3.02.a-display";
+        reg = <0x0 0x6000>;
+
+        memory-region = <&logicvc_cma>;
+
+        clocks = <&logicvc_vclk 0>, <&logicvc_lvdsclk 0>;
+        clock-names = "vclk", "lvdsclk";
+
+        interrupt-parent = <&intc>;
+        interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+
+        xylon,display-interface = "lvds-4bits";
+        xylon,display-colorspace = "rgb";
+        xylon,display-depth = <16>;
+        xylon,row-stride = <1024>;
+
+        xylon,layers-configurable;
+
+        layers {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          layer@0 {
+            reg = <0>;
+            xylon,layer-depth = <16>;
+            xylon,layer-colorspace = "rgb";
+            xylon,layer-alpha-mode = "layer";
+            xylon,layer-base-offset = <0>;
+            xylon,layer-buffer-offset = <480>;
+            xylon,layer-primary;
+          };
+
+          layer@1 {
+            reg = <1>;
+            xylon,layer-depth = <16>;
+            xylon,layer-colorspace = "rgb";
+            xylon,layer-alpha-mode = "layer";
+            xylon,layer-base-offset = <2400>;
+            xylon,layer-buffer-offset = <480>;
+          };
+
+          layer@2 {
+            reg = <2>;
+            xylon,layer-depth = <16>;
+            xylon,layer-colorspace = "rgb";
+            xylon,layer-alpha-mode = "layer";
+            xylon,layer-base-offset = <960>;
+            xylon,layer-buffer-offset = <480>;
+          };
+
+          layer@3 {
+            reg = <3>;
+            xylon,layer-depth = <16>;
+            xylon,layer-colorspace = "rgb";
+            xylon,layer-alpha-mode = "layer";
+            xylon,layer-base-offset = <480>;
+            xylon,layer-buffer-offset = <480>;
+          };
+
+          layer@4 {
+            reg = <4>;
+            xylon,layer-depth = <16>;
+            xylon,layer-colorspace = "rgb";
+            xylon,layer-alpha-mode = "layer";
+            xylon,layer-base-offset = <8192>;
+            xylon,layer-buffer-offset = <480>;
+          };
+        };
+
+        port {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          logicvc_output: endpoint@0 {
+            reg = <0>;
+            remote-endpoint = <&panel_input>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
index 83808199657b..02d5bd035409 100644
--- a/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/dma/allwinner,sun4i-a10-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 DMA Controller Device Tree Bindings
+title: Allwinner A10 DMA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   "#dma-cells":
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
index b6e1ebfaf366..ec2d7a789ffe 100644
--- a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/dma/allwinner,sun50i-a64-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A64 DMA Controller Device Tree Bindings
+title: Allwinner A64 DMA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   "#dma-cells":
@@ -20,9 +20,11 @@ properties:
 
   compatible:
     oneOf:
-      - const: allwinner,sun50i-a64-dma
-      - const: allwinner,sun50i-a100-dma
-      - const: allwinner,sun50i-h6-dma
+      - enum:
+          - allwinner,sun20i-d1-dma
+          - allwinner,sun50i-a64-dma
+          - allwinner,sun50i-a100-dma
+          - allwinner,sun50i-h6-dma
       - items:
           - const: allwinner,sun8i-r40-dma
           - const: allwinner,sun50i-a64-dma
@@ -58,13 +60,14 @@ if:
   properties:
     compatible:
       enum:
+        - allwinner,sun20i-d1-dma
         - allwinner,sun50i-a100-dma
         - allwinner,sun50i-h6-dma
 
 then:
   properties:
     clocks:
-      maxItems: 2
+      minItems: 2
 
   required:
     - clock-names
diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
index a6df6f8b54db..5d554bcfab3d 100644
--- a/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/dma/allwinner,sun6i-a31-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 DMA Controller Device Tree Bindings
+title: Allwinner A31 DMA Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   "#dma-cells":
diff --git a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
index b193ee2db4a7..391bf5838602 100644
--- a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
+++ b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
@@ -7,14 +7,14 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Altera mSGDMA IP core
 
 maintainers:
-  - Olivier Dautricourt <olivier.dautricourt@orolia.com>
+  - Olivier Dautricourt <olivierdautricourt@gmail.com>
 
 description: |
   Altera / Intel modular Scatter-Gather Direct Memory Access (mSGDMA)
   intellectual property (IP)
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/apple,admac.yaml b/Documentation/devicetree/bindings/dma/apple,admac.yaml
new file mode 100644
index 000000000000..ab193bc8bdbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/apple,admac.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/apple,admac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Audio DMA Controller (ADMAC)
+
+description: |
+  Apple's Audio DMA Controller (ADMAC) is used to fetch and store audio samples
+  on SoCs from the "Apple Silicon" family.
+
+  The controller has been seen with up to 24 channels. Even-numbered channels
+  are TX-only, odd-numbered are RX-only. Individual channels are coupled to
+  fixed device endpoints.
+
+maintainers:
+  - Martin Povišer <povik+lin@cutebit.org>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t6000-admac
+          - apple,t8103-admac
+          - apple,t8112-admac
+      - const: apple,admac
+
+  reg:
+    maxItems: 1
+
+  '#dma-cells':
+    const: 1
+    description:
+      Clients specify a single cell with channel number.
+
+  dma-channels:
+    maximum: 24
+
+  interrupts:
+    minItems: 4
+    maxItems: 4
+    description:
+      Interrupts that correspond to the 4 IRQ outputs of the controller. Usually
+      only one of the controller outputs will be connected as an usable interrupt
+      source. The remaining interrupts will be left without a valid value, e.g.
+      in an interrupts-extended list the disconnected positions will contain
+      an empty phandle reference <0>.
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#dma-cells'
+  - dma-channels
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    aic: interrupt-controller {
+      interrupt-controller;
+      #interrupt-cells = <3>;
+    };
+
+    admac: dma-controller@238200000 {
+      compatible = "apple,t8103-admac", "apple,admac";
+      reg = <0x38200000 0x34000>;
+      dma-channels = <24>;
+      interrupts-extended = <0>,
+                            <&aic AIC_IRQ 626 IRQ_TYPE_LEVEL_HIGH>,
+                            <0>,
+                            <0>;
+      #dma-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/arm,pl330.yaml b/Documentation/devicetree/bindings/dma/arm,pl330.yaml
new file mode 100644
index 000000000000..4a3dd6f5309b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm,pl330.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/arm,pl330.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM PrimeCell PL330 DMA Controller
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
+  between memory and peripherals or memory to memory.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        const: arm,pl330
+  required:
+    - compatible
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - $ref: /schemas/arm/primecell.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - arm,pl330
+      - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 32
+    description: A single combined interrupt or an interrupt per event
+
+  '#dma-cells':
+    const: 1
+    description: Contains the DMA request number for the consumer
+
+  arm,pl330-broken-no-flushp:
+    type: boolean
+    description: quirk for avoiding to execute DMAFLUSHP
+
+  arm,pl330-periph-burst:
+    type: boolean
+    description: quirk for performing burst transfer only
+
+  dma-coherent: true
+
+  iommus:
+    minItems: 1
+    maxItems: 9
+    description: Up to 1 IOMMU entry per DMA channel for writes and 1
+      IOMMU entry for reads.
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: dma
+      - const: dma-ocp
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    dma-controller@12680000 {
+        compatible = "arm,pl330", "arm,primecell";
+        reg = <0x12680000 0x1000>;
+        interrupts = <99>;
+        #dma-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/arm-pl08x.yaml b/Documentation/devicetree/bindings/dma/arm-pl08x.yaml
index 3bd9eea543ca..ab25ae63d2c3 100644
--- a/Documentation/devicetree/bindings/dma/arm-pl08x.yaml
+++ b/Documentation/devicetree/bindings/dma/arm-pl08x.yaml
@@ -10,7 +10,8 @@ maintainers:
   - Vinod Koul <vkoul@kernel.org>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: /schemas/arm/primecell.yaml#
+  - $ref: dma-controller.yaml#
 
 # We need a select here so we don't match all nodes with 'arm,primecell'
 select:
@@ -89,6 +90,9 @@ properties:
       - 64
     description: bus width used for memcpy in bits. FTDMAC020 also accept 64 bits
 
+  resets:
+    maxItems: 1
+
 required:
   - reg
   - interrupts
diff --git a/Documentation/devicetree/bindings/dma/arm-pl330.txt b/Documentation/devicetree/bindings/dma/arm-pl330.txt
deleted file mode 100644
index 315e90122afa..000000000000
--- a/Documentation/devicetree/bindings/dma/arm-pl330.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* ARM PrimeCell PL330 DMA Controller
-
-The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
-between memory and peripherals or memory to memory.
-
-Required properties:
-  - compatible: should include both "arm,pl330" and "arm,primecell".
-  - reg: physical base address of the controller and length of memory mapped
-    region.
-  - interrupts: interrupt number to the cpu.
-
-Optional properties:
-  - dma-coherent      : Present if dma operations are coherent
-  - #dma-cells: must be <1>. used to represent the number of integer
-    cells in the dmas property of client device.
-  - dma-channels: contains the total number of DMA channels supported by the DMAC
-  - dma-requests: contains the total number of DMA requests supported by the DMAC
-  - arm,pl330-broken-no-flushp: quirk for avoiding to execute DMAFLUSHP
-  - arm,pl330-periph-burst: quirk for performing burst transfer only
-  - resets: contains an entry for each entry in reset-names.
-	    See ../reset/reset.txt for details.
-  - reset-names: must contain at least "dma", and optional is "dma-ocp".
-
-Example:
-
-	pdma0: pdma@12680000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x12680000 0x1000>;
-		interrupts = <99>;
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <32>;
-	};
-
-Client drivers (device nodes requiring dma transfers from dev-to-mem or
-mem-to-dev) should specify the DMA channel numbers and dma channel names
-as shown below.
-
-  [property name]  = <[phandle of the dma controller] [dma request id]>;
-  [property name]  = <[dma channel name]>
-
-      where 'dma request id' is the dma request number which is connected
-      to the client controller. The 'property name' 'dmas' and 'dma-names'
-      as required by the generic dma device tree binding helpers. The dma
-      names correspond 1:1 with the dma request ids in the dmas property.
-
-  Example:  dmas = <&pdma0 12
-		    &pdma1 11>;
-	    dma-names = "tx", "rx";
diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml
index ad06d36af208..ea700f8ee6c6 100644
--- a/Documentation/devicetree/bindings/dma/dma-common.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-common.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/dma-common.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DMA Engine Generic Binding
+title: DMA Engine Common Properties
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
diff --git a/Documentation/devicetree/bindings/dma/dma-controller.yaml b/Documentation/devicetree/bindings/dma/dma-controller.yaml
index 0043b91da95e..04d150d4d15d 100644
--- a/Documentation/devicetree/bindings/dma/dma-controller.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-controller.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/dma/dma-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DMA Controller Generic Binding
+title: DMA Controller Common Properties
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
 
 allOf:
-  - $ref: "dma-common.yaml#"
+  - $ref: dma-common.yaml#
 
 # Everything else is described in the common file
 properties:
@@ -24,10 +24,10 @@ examples:
     dma: dma-controller@48000000 {
         compatible = "ti,omap-sdma";
         reg = <0x48000000 0x1000>;
-        interrupts = <0 12 0x4
-                      0 13 0x4
-                      0 14 0x4
-                      0 15 0x4>;
+        interrupts = <0 12 0x4>,
+                     <0 13 0x4>,
+                     <0 14 0x4>,
+                     <0 15 0x4>;
         #dma-cells = <1>;
         dma-channels = <32>;
         dma-requests = <127>;
diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml
index e72748496fd9..346fe0fa4460 100644
--- a/Documentation/devicetree/bindings/dma/dma-router.yaml
+++ b/Documentation/devicetree/bindings/dma/dma-router.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/dma/dma-router.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DMA Router Generic Binding
+title: DMA Router Common Properties
 
 maintainers:
   - Vinod Koul <vkoul@kernel.org>
 
 allOf:
-  - $ref: "dma-common.yaml#"
+  - $ref: dma-common.yaml#
 
 description:
   DMA routers are transparent IP blocks used to route DMA request
@@ -24,6 +24,8 @@ properties:
 
   dma-masters:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Array of phandles to the DMA controllers the router can direct
       the signal to.
diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
new file mode 100644
index 000000000000..5fd8fc604261
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale enhanced Direct Memory Access(eDMA) Controller
+
+description: |
+  The eDMA channels have multiplex capability by programmable
+  memory-mapped registers. channels are split into two groups, called
+  DMAMUX0 and DMAMUX1, specific DMA request source can only be multiplexed
+  by any channel of certain group, DMAMUX0 or DMAMUX1, but not both.
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,vf610-edma
+          - fsl,imx7ulp-edma
+      - items:
+          - const: fsl,ls1028a-edma
+          - const: fsl,vf610-edma
+
+  reg:
+    minItems: 2
+    maxItems: 3
+
+  interrupts:
+    minItems: 2
+    maxItems: 17
+
+  interrupt-names:
+    minItems: 2
+    maxItems: 17
+
+  "#dma-cells":
+    const: 2
+
+  dma-channels:
+    const: 32
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  big-endian:
+    description: |
+      If present registers and hardware scatter/gather descriptors of the
+      eDMA are implemented in big endian mode, otherwise in little mode.
+    type: boolean
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - dma-channels
+
+allOf:
+  - $ref: dma-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,vf610-edma
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: dmamux0
+            - const: dmamux1
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          items:
+            - const: edma-tx
+            - const: edma-err
+        reg:
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx7ulp-edma
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: dma
+            - const: dmamux0
+        interrupts:
+          maxItems: 17
+        reg:
+          maxItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    edma0: dma-controller@40018000 {
+      #dma-cells = <2>;
+      compatible = "fsl,vf610-edma";
+      reg = <0x40018000 0x2000>,
+            <0x40024000 0x1000>,
+            <0x40025000 0x1000>;
+      interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+                   <0 9 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "edma-tx", "edma-err";
+      dma-channels = <32>;
+      clock-names = "dmamux0", "dmamux1";
+      clocks = <&clks VF610_CLK_DMAMUX0>, <&clks VF610_CLK_DMAMUX1>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+
+    edma1: dma-controller@40080000 {
+      #dma-cells = <2>;
+      compatible = "fsl,imx7ulp-edma";
+      reg = <0x40080000 0x2000>,
+            <0x40210000 0x1000>;
+      dma-channels = <32>;
+      interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+                   /* last is eDMA2-ERR interrupt */
+                   <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+       clock-names = "dma", "dmamux0";
+       clocks = <&pcc2 IMX7ULP_CLK_DMA1>, <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
new file mode 100644
index 000000000000..b95dd8db5a30
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,imx-sdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
+
+maintainers:
+  - Joy Zou <joy.zou@nxp.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx50-sdma
+              - fsl,imx51-sdma
+              - fsl,imx53-sdma
+              - fsl,imx6q-sdma
+              - fsl,imx7d-sdma
+          - const: fsl,imx35-sdma
+      - items:
+          - enum:
+              - fsl,imx6sx-sdma
+              - fsl,imx6sl-sdma
+          - const: fsl,imx6q-sdma
+      - items:
+          - const: fsl,imx6ul-sdma
+          - const: fsl,imx6q-sdma
+          - const: fsl,imx35-sdma
+      - items:
+          - const: fsl,imx6sll-sdma
+          - const: fsl,imx6ul-sdma
+      - items:
+          - const: fsl,imx8mq-sdma
+          - const: fsl,imx7d-sdma
+      - items:
+          - enum:
+              - fsl,imx8mp-sdma
+              - fsl,imx8mn-sdma
+              - fsl,imx8mm-sdma
+          - const: fsl,imx8mq-sdma
+      - items:
+          - enum:
+              - fsl,imx25-sdma
+              - fsl,imx31-sdma
+              - fsl,imx35-sdma
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,sdma-ram-script-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Should contain the full path of SDMA RAM scripts firmware.
+
+  "#dma-cells":
+    const: 3
+    description: |
+      The first cell: request/event ID
+
+      The second cell: peripheral types ID
+        enum:
+          - MCU domain SSI: 0
+          - Shared SSI: 1
+          - MMC: 2
+          - SDHC: 3
+          - MCU domain UART: 4
+          - Shared UART: 5
+          - FIRI: 6
+          - MCU domain CSPI: 7
+          - Shared CSPI: 8
+          - SIM: 9
+          - ATA: 10
+          - CCM: 11
+          - External peripheral: 12
+          - Memory Stick Host Controller: 13
+          - Shared Memory Stick Host Controller: 14
+          - DSP: 15
+          - Memory: 16
+          - FIFO type Memory: 17
+          - SPDIF: 18
+          - IPU Memory: 19
+          - ASRC: 20
+          - ESAI: 21
+          - SSI Dual FIFO: 22
+              description: needs firmware more than ver 2
+          - Shared ASRC: 23
+          - SAI: 24
+          - HDMI Audio: 25
+
+       The third cell: transfer priority ID
+         enum:
+           - High: 0
+           - Medium: 1
+           - Low: 2
+
+  gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the General Purpose Register (GPR) node
+
+  fsl,sdma-event-remap:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    maxItems: 2
+    items:
+      items:
+        - description: GPR register offset
+        - description: GPR register shift
+        - description: GPR register value
+    description: |
+      Register bits of sdma event remap, the format is <reg shift val>.
+      The order is <RX>, <TX>.
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: ahb
+
+  iram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the On-chip RAM (OCRAM) node.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - fsl,sdma-ram-script-name
+
+additionalProperties: false
+
+examples:
+  - |
+    sdma: dma-controller@83fb0000 {
+      compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+      reg = <0x83fb0000 0x4000>;
+      interrupts = <6>;
+      #dma-cells = <3>;
+      fsl,sdma-ram-script-name = "sdma-imx51.bin";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/fsl,mxs-dma.yaml b/Documentation/devicetree/bindings/dma/fsl,mxs-dma.yaml
new file mode 100644
index 000000000000..add9c77e8b52
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,mxs-dma.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Direct Memory Access (DMA) Controller from i.MX23/i.MX28
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6q-dma-apbh
+              - fsl,imx6sx-dma-apbh
+              - fsl,imx7d-dma-apbh
+          - const: fsl,imx28-dma-apbh
+      - enum:
+          - fsl,imx23-dma-apbh
+          - fsl,imx23-dma-apbx
+          - fsl,imx28-dma-apbh
+          - fsl,imx28-dma-apbx
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    minItems: 4
+    maxItems: 16
+
+  "#dma-cells":
+    const: 1
+
+  dma-channels:
+    enum: [4, 8, 16]
+
+required:
+  - compatible
+  - reg
+  - "#dma-cells"
+  - dma-channels
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    interrupt-parent = <&irqc>;
+
+    dma-controller@80004000 {
+      compatible = "fsl,imx28-dma-apbh";
+      reg = <0x80004000 0x2000>;
+      interrupts = <82 83 84 85
+                    88 88 88 88
+                    88 88 88 88
+                    87 86 0 0>;
+      #dma-cells = <1>;
+      dma-channels = <16>;
+    };
+
+    dma-controller@80024000 {
+      compatible = "fsl,imx28-dma-apbx";
+      reg = <0x80024000 0x2000>;
+      interrupts = <78 79 66 0
+                    80 81 68 69
+                    70 71 72 73
+                    74 75 76 77>;
+      #dma-cells = <1>;
+      dma-channels = <16>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt
deleted file mode 100644
index ee1754739b4b..000000000000
--- a/Documentation/devicetree/bindings/dma/fsl-edma.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-* Freescale enhanced Direct Memory Access(eDMA) Controller
-
-  The eDMA channels have multiplex capability by programmble memory-mapped
-registers. channels are split into two groups, called DMAMUX0 and DMAMUX1,
-specific DMA request source can only be multiplexed by any channel of certain
-group, DMAMUX0 or DMAMUX1, but not both.
-
-* eDMA Controller
-Required properties:
-- compatible :
-	- "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
-	- "fsl,imx7ulp-edma" for eDMA2 used similar to that on i.mx7ulp
-	- "fsl,ls1028a-edma" followed by "fsl,vf610-edma" for eDMA used on the
-	  LS1028A SoC.
-- reg : Specifies base physical address(s) and size of the eDMA registers.
-	The 1st region is eDMA control register's address and size.
-	The 2nd and the 3rd regions are programmable channel multiplexing
-	control register's address and size.
-- interrupts : A list of interrupt-specifiers, one for each entry in
-	interrupt-names on vf610 similar SoC. But for i.mx7ulp per channel
-	per transmission interrupt, total 16 channel interrupt and 1
-	error interrupt(located in the last), no interrupt-names list on
-	i.mx7ulp for clean on dts.
-- #dma-cells : Must be <2>.
-	The 1st cell specifies the DMAMUX(0 for DMAMUX0 and 1 for DMAMUX1).
-	Specific request source can only be multiplexed by specific channels
-	group called DMAMUX.
-	The 2nd cell specifies the request source(slot) ID.
-	See the SoC's reference manual for all the supported request sources.
-- dma-channels : Number of channels supported by the controller
-- clock-names : A list of channel group clock names. Should contain:
-	"dmamux0" - clock name of mux0 group
-	"dmamux1" - clock name of mux1 group
-	Note: No dmamux0 on i.mx7ulp, but another 'dma' clk added on i.mx7ulp.
-- clocks : A list of phandle and clock-specifier pairs, one for each entry in
-	clock-names.
-
-Optional properties:
-- big-endian: If present registers and hardware scatter/gather descriptors
-	of the eDMA are implemented in big endian mode, otherwise in little
-	mode.
-- interrupt-names : Should contain the below on vf610 similar SoC but not used
-	on i.mx7ulp similar SoC:
-	"edma-tx" - the transmission interrupt
-	"edma-err" - the error interrupt
-
-
-Examples:
-
-edma0: dma-controller@40018000 {
-	#dma-cells = <2>;
-	compatible = "fsl,vf610-edma";
-	reg = <0x40018000 0x2000>,
-		<0x40024000 0x1000>,
-		<0x40025000 0x1000>;
-	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
-		<0 9 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "edma-tx", "edma-err";
-	dma-channels = <32>;
-	clock-names = "dmamux0", "dmamux1";
-	clocks = <&clks VF610_CLK_DMAMUX0>,
-		<&clks VF610_CLK_DMAMUX1>;
-}; /* vf610 */
-
-edma1: dma-controller@40080000 {
-	#dma-cells = <2>;
-	compatible = "fsl,imx7ulp-edma";
-	reg = <0x40080000 0x2000>,
-		<0x40210000 0x1000>;
-	dma-channels = <32>;
-	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-		     /* last is eDMA2-ERR interrupt */
-		     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-	clock-names = "dma", "dmamux0";
-	clocks = <&pcc2 IMX7ULP_CLK_DMA1>,
-		 <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
-}; /* i.mx7ulp */
-
-* DMA clients
-DMA client drivers that uses the DMA function must use the format described
-in the dma.txt file, using a two-cell specifier for each channel: the 1st
-specifies the channel group(DMAMUX) in which this request can be multiplexed,
-and the 2nd specifies the request source.
-
-Examples:
-
-sai2: sai@40031000 {
-	compatible = "fsl,vf610-sai";
-	reg = <0x40031000 0x1000>;
-	interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-	clock-names = "sai";
-	clocks = <&clks VF610_CLK_SAI2>;
-	dma-names = "tx", "rx";
-	dmas = <&edma0 0 21>,
-		<&edma0 0 20>;
-};
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
index 7bd8847d6394..1c9929d53727 100644
--- a/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-imx-dma.txt
@@ -13,8 +13,10 @@ Required properties:
 - #dma-cells : Has to be 1. imx-dma does not support anything else.
 
 Optional properties:
-- #dma-channels : Number of DMA channels supported. Should be 16.
-- #dma-requests : Number of DMA requests supported.
+- dma-channels : Number of DMA channels supported. Should be 16.
+- #dma-channels : deprecated
+- dma-requests : Number of DMA requests supported.
+- #dma-requests : deprecated
 
 Example:
 
@@ -23,7 +25,7 @@ Example:
 		reg = <0x10001000 0x1000>;
 		interrupts = <32 33>;
 		#dma-cells = <1>;
-		#dma-channels = <16>;
+		dma-channels = <16>;
 	};
 
 
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
deleted file mode 100644
index 12c316ff4834..000000000000
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ /dev/null
@@ -1,118 +0,0 @@
-* Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
-
-Required properties:
-- compatible : Should be one of
-      "fsl,imx25-sdma"
-      "fsl,imx31-sdma", "fsl,imx31-to1-sdma", "fsl,imx31-to2-sdma"
-      "fsl,imx35-sdma", "fsl,imx35-to1-sdma", "fsl,imx35-to2-sdma"
-      "fsl,imx51-sdma"
-      "fsl,imx53-sdma"
-      "fsl,imx6q-sdma"
-      "fsl,imx7d-sdma"
-      "fsl,imx6ul-sdma"
-      "fsl,imx8mq-sdma"
-      "fsl,imx8mm-sdma"
-      "fsl,imx8mn-sdma"
-      "fsl,imx8mp-sdma"
-  The -to variants should be preferred since they allow to determine the
-  correct ROM script addresses needed for the driver to work without additional
-  firmware.
-- reg : Should contain SDMA registers location and length
-- interrupts : Should contain SDMA interrupt
-- #dma-cells : Must be <3>.
-  The first cell specifies the DMA request/event ID.  See details below
-  about the second and third cell.
-- fsl,sdma-ram-script-name : Should contain the full path of SDMA RAM
-  scripts firmware
-
-The second cell of dma phandle specifies the peripheral type of DMA transfer.
-The full ID of peripheral types can be found below.
-
-	ID	transfer type
-	---------------------
-	0	MCU domain SSI
-	1	Shared SSI
-	2	MMC
-	3	SDHC
-	4	MCU domain UART
-	5	Shared UART
-	6	FIRI
-	7	MCU domain CSPI
-	8	Shared CSPI
-	9	SIM
-	10	ATA
-	11	CCM
-	12	External peripheral
-	13	Memory Stick Host Controller
-	14	Shared Memory Stick Host Controller
-	15	DSP
-	16	Memory
-	17	FIFO type Memory
-	18	SPDIF
-	19	IPU Memory
-	20	ASRC
-	21	ESAI
-	22	SSI Dual FIFO	(needs firmware ver >= 2)
-	23	Shared ASRC
-	24	SAI
-
-The third cell specifies the transfer priority as below.
-
-	ID	transfer priority
-	-------------------------
-	0	High
-	1	Medium
-	2	Low
-
-Optional properties:
-
-- gpr : The phandle to the General Purpose Register (GPR) node.
-- fsl,sdma-event-remap : Register bits of sdma event remap, the format is
-  <reg shift val>.
-    reg is the GPR register offset.
-    shift is the bit position inside the GPR register.
-    val is the value of the bit (0 or 1).
-
-Examples:
-
-sdma@83fb0000 {
-	compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
-	reg = <0x83fb0000 0x4000>;
-	interrupts = <6>;
-	#dma-cells = <3>;
-	fsl,sdma-ram-script-name = "sdma-imx51.bin";
-};
-
-DMA clients connected to the i.MX SDMA controller must use the format
-described in the dma.txt file.
-
-Examples:
-
-ssi2: ssi@70014000 {
-	compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
-	reg = <0x70014000 0x4000>;
-	interrupts = <30>;
-	clocks = <&clks 49>;
-	dmas = <&sdma 24 1 0>,
-	       <&sdma 25 1 0>;
-	dma-names = "rx", "tx";
-	fsl,fifo-depth = <15>;
-};
-
-Using the fsl,sdma-event-remap property:
-
-If we want to use SDMA on the SAI1 port on a MX6SX:
-
-&sdma {
-	gpr = <&gpr>;
-	/* SDMA events remap for SAI1_RX and SAI1_TX */
-	fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
-};
-
-The fsl,sdma-event-remap property in this case has two values:
-- <0 15 1> means that the offset is 0, so GPR0 is the register of the
-SDMA remap. Bit 15 of GPR0 selects between UART4_RX and SAI1_RX.
-Setting bit 15 to 1 selects SAI1_RX.
-- <0 16 1> means that the offset is 0, so GPR0 is the register of the
-SDMA remap. Bit 16 of GPR0 selects between UART4_TX and SAI1_TX.
-Setting bit 16 to 1 selects SAI1_TX.
diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
deleted file mode 100644
index e30e184f50c7..000000000000
--- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Freescale MXS DMA
-
-Required properties:
-- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx"
-- reg : Should contain registers location and length
-- interrupts : Should contain the interrupt numbers of DMA channels.
-  If a channel is empty/reserved, 0 should be filled in place.
-- #dma-cells : Must be <1>.  The number cell specifies the channel ID.
-- dma-channels : Number of channels supported by the DMA controller
-
-Optional properties:
-- interrupt-names : Name of DMA channel interrupts
-
-Supported chips:
-imx23, imx28.
-
-Examples:
-
-dma_apbh: dma-apbh@80004000 {
-	compatible = "fsl,imx28-dma-apbh";
-	reg = <0x80004000 0x2000>;
-	interrupts = <82 83 84 85
-		      88 88 88 88
-		      88 88 88 88
-		      87 86 0 0>;
-	interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
-			  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
-			  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
-			  "hsadc", "lcdif", "empty", "empty";
-	#dma-cells = <1>;
-	dma-channels = <16>;
-};
-
-dma_apbx: dma-apbx@80024000 {
-	compatible = "fsl,imx28-dma-apbx";
-	reg = <0x80024000 0x2000>;
-	interrupts = <78 79 66 0
-		      80 81 68 69
-		      70 71 72 73
-		      74 75 76 77>;
-	interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
-			  "saif0", "saif1", "i2c0", "i2c1",
-			  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
-			  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
-	#dma-cells = <1>;
-	dma-channels = <16>;
-};
-
-DMA clients connected to the MXS DMA controller must use the format
-described in the dma.txt file.
-
-Examples:
-
-auart0: serial@8006a000 {
-	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-	reg = <0x8006a000 0x2000>;
-	interrupts = <112>;
-	dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-	dma-names = "rx", "tx";
-};
diff --git a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
index ac4d59494fc8..37400496e086 100644
--- a/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
+++ b/Documentation/devicetree/bindings/dma/ingenic,dma.yaml
@@ -4,25 +4,34 @@
 $id: http://devicetree.org/schemas/dma/ingenic,dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs DMA Controller DT bindings
+title: Ingenic SoCs DMA Controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
-    enum:
-      - ingenic,jz4740-dma
-      - ingenic,jz4725b-dma
-      - ingenic,jz4760-dma
-      - ingenic,jz4760b-dma
-      - ingenic,jz4770-dma
-      - ingenic,jz4780-dma
-      - ingenic,x1000-dma
-      - ingenic,x1830-dma
+    oneOf:
+      - enum:
+          - ingenic,jz4740-dma
+          - ingenic,jz4725b-dma
+          - ingenic,jz4755-dma
+          - ingenic,jz4760-dma
+          - ingenic,jz4760-bdma
+          - ingenic,jz4760-mdma
+          - ingenic,jz4760b-dma
+          - ingenic,jz4760b-bdma
+          - ingenic,jz4760b-mdma
+          - ingenic,jz4770-dma
+          - ingenic,jz4780-dma
+          - ingenic,x1000-dma
+          - ingenic,x1830-dma
+      - items:
+          - const: ingenic,jz4770-bdma
+          - const: ingenic,jz4760b-bdma
 
   reg:
     items:
@@ -36,13 +45,19 @@ properties:
     maxItems: 1
 
   "#dma-cells":
-    const: 2
+    enum: [2, 3]
     description: >
       DMA clients must use the format described in dma.txt, giving a phandle
-      to the DMA controller plus the following 2 integer cells:
+      to the DMA controller plus the following integer cells:
 
-      - Request type: The DMA request type for transfers to/from the
-        device on the allocated channel, as defined in the SoC documentation.
+      - Request type: The DMA request type specifies the device endpoint that
+        will be the source or destination of the DMA transfer.
+        If "#dma-cells" is 2, the request type is a single cell, and the
+        direction will be unidirectional (either RX or TX but not both).
+        If "#dma-cells" is 3, the request type has two cells; the first
+        one corresponds to the host to device direction (TX), the second one
+        corresponds to the device to host direction (RX). The DMA channel is
+        then bidirectional.
 
       - Channel: If set to 0xffffffff, any available channel will be allocated
         for the client. Otherwise, the exact channel specified will be used.
@@ -68,7 +83,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
     dma: dma-controller@13420000 {
       compatible = "ingenic,jz4780-dma";
       reg = <0x13420000 0x400>, <0x13421000 0x40>;
diff --git a/Documentation/devicetree/bindings/dma/intel,ldma.yaml b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
index a5c4be783593..d6bb553a2c6f 100644
--- a/Documentation/devicetree/bindings/dma/intel,ldma.yaml
+++ b/Documentation/devicetree/bindings/dma/intel,ldma.yaml
@@ -11,7 +11,7 @@ maintainers:
   - mallikarjunax.reddy@intel.com
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
new file mode 100644
index 000000000000..dab468a88942
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/mediatek,uart-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek UART APDMA controller
+
+maintainers:
+  - Long Cheng <long.cheng@mediatek.com>
+
+description: |
+  The MediaTek UART APDMA controller provides DMA capabilities
+  for the UART peripheral bus.
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2712-uart-dma
+              - mediatek,mt6795-uart-dma
+              - mediatek,mt8365-uart-dma
+              - mediatek,mt8516-uart-dma
+          - const: mediatek,mt6577-uart-dma
+      - enum:
+          - mediatek,mt6577-uart-dma
+
+  reg:
+    minItems: 1
+    maxItems: 16
+
+  interrupts:
+    description: |
+      TX, RX interrupt lines for each UART APDMA channel
+    minItems: 1
+    maxItems: 16
+
+  clocks:
+    description: Must contain one entry for the APDMA main clock
+    maxItems: 1
+
+  clock-names:
+    const: apdma
+
+  "#dma-cells":
+    const: 1
+    description: |
+      The first cell specifies the UART APDMA channel number
+
+  dma-requests:
+    description: |
+      Number of virtual channels of the UART APDMA controller
+    maximum: 16
+
+  mediatek,dma-33bits:
+    type: boolean
+    description: Enable 33-bits UART APDMA support
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+if:
+  not:
+    required:
+      - dma-requests
+then:
+  properties:
+    interrupts:
+      maxItems: 8
+    reg:
+      maxItems: 8
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt2712-clk.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        apdma: dma-controller@11000400 {
+            compatible = "mediatek,mt2712-uart-dma",
+                         "mediatek,mt6577-uart-dma";
+            reg = <0 0x11000400 0 0x80>,
+                  <0 0x11000480 0 0x80>,
+                  <0 0x11000500 0 0x80>,
+                  <0 0x11000580 0 0x80>,
+                  <0 0x11000600 0 0x80>,
+                  <0 0x11000680 0 0x80>,
+                  <0 0x11000700 0 0x80>,
+                  <0 0x11000780 0 0x80>,
+                  <0 0x11000800 0 0x80>,
+                  <0 0x11000880 0 0x80>,
+                  <0 0x11000900 0 0x80>,
+                  <0 0x11000980 0 0x80>;
+            interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
+                         <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+            dma-requests = <12>;
+            clocks = <&pericfg CLK_PERI_AP_DMA>;
+            clock-names = "apdma";
+            mediatek,dma-33bits;
+            #dma-cells = <1>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt
index 8f7364a7b349..ec18bf0a802a 100644
--- a/Documentation/devicetree/bindings/dma/mmp-dma.txt
+++ b/Documentation/devicetree/bindings/dma/mmp-dma.txt
@@ -10,10 +10,12 @@ Required properties:
 		or one irq for pdma device
 
 Optional properties:
-- #dma-channels: Number of DMA channels supported by the controller (defaults
+- dma-channels: Number of DMA channels supported by the controller (defaults
   to 32 when not specified)
-- #dma-requests: Number of DMA requestor lines supported by the controller
+- #dma-channels: deprecated
+- dma-requests: Number of DMA requestor lines supported by the controller
   (defaults to 32 when not specified)
+- #dma-requests: deprecated
 
 "marvell,pdma-1.0"
 Used platforms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688.
@@ -33,7 +35,7 @@ pdma: dma-controller@d4000000 {
 	      reg = <0xd4000000 0x10000>;
 	      interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>;
 	      interrupt-parent = <&intcmux32>;
-	      #dma-channels = <16>;
+	      dma-channels = <16>;
       };
 
 /*
@@ -45,7 +47,7 @@ pdma: dma-controller@d4000000 {
 	      compatible = "marvell,pdma-1.0";
 	      reg = <0xd4000000 0x10000>;
 	      interrupts = <47>;
-	      #dma-channels = <16>;
+	      dma-channels = <16>;
       };
 
 
diff --git a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
index 8a9f3559335b..7e14e26676ec 100644
--- a/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
+++ b/Documentation/devicetree/bindings/dma/moxa,moxart-dma.txt
@@ -34,8 +34,8 @@ Example:
 Use specific request line passing from dma
 For example, MMC request line is 5
 
-	sdhci: sdhci@98e00000 {
-		compatible = "moxa,moxart-sdhci";
+	mmc: mmc@98e00000 {
+		compatible = "moxa,moxart-mmc";
 		reg = <0x98e00000 0x5C>;
 		interrupts = <5 0>;
 		clocks = <&clk_apb>;
diff --git a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
deleted file mode 100644
index fef9c1eeb264..000000000000
--- a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Mediatek UART APDMA Controller
-
-Required properties:
-- compatible should contain:
-  * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA
-  * "mediatek,mt6577-uart-dma" for MT6577 and all of the above
-  * "mediatek,mt8516-uart-dma", "mediatek,mt6577" for MT8516 SoC
-
-- reg: The base address of the APDMA register bank.
-
-- interrupts: A single interrupt specifier.
- One interrupt per dma-requests, or 8 if no dma-requests property is present
-
-- dma-requests: The number of DMA channels
-
-- clocks : Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: The APDMA clock for register accesses
-
-- mediatek,dma-33bits: Present if the DMA requires support
-
-Examples:
-
-	apdma: dma-controller@11000400 {
-		compatible = "mediatek,mt2712-uart-dma",
-			     "mediatek,mt6577-uart-dma";
-		reg = <0 0x11000400 0 0x80>,
-		      <0 0x11000480 0 0x80>,
-		      <0 0x11000500 0 0x80>,
-		      <0 0x11000580 0 0x80>,
-		      <0 0x11000600 0 0x80>,
-		      <0 0x11000680 0 0x80>,
-		      <0 0x11000700 0 0x80>,
-		      <0 0x11000780 0 0x80>,
-		      <0 0x11000800 0 0x80>,
-		      <0 0x11000880 0 0x80>,
-		      <0 0x11000900 0 0x80>,
-		      <0 0x11000980 0 0x80>;
-		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
-		dma-requests = <12>;
-		clocks = <&pericfg CLK_PERI_AP_DMA>;
-		clock-names = "apdma";
-		mediatek,dma-33bits;
-		#dma-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml
new file mode 100644
index 000000000000..a790e5687844
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra186-gpc-dma.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/nvidia,tegra186-gpc-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPC DMA Controller
+
+description: |
+  The Tegra General Purpose Central (GPC) DMA controller is used for faster
+  data transfers between memory to memory, memory to device and device to
+  memory.
+
+maintainers:
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Rajesh Gumasta <rgumasta@nvidia.com>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-gpcdma
+      - items:
+          - enum:
+              - nvidia,tegra234-gpcdma
+              - nvidia,tegra194-gpcdma
+          - const: nvidia,tegra186-gpcdma
+
+  "#dma-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Should contain all of the per-channel DMA interrupts in
+      ascending order with respect to the DMA channel index.
+    minItems: 1
+    maxItems: 32
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: gpcdma
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  dma-channel-mask:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - reset-names
+  - "#dma-cells"
+  - iommus
+  - dma-channel-mask
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    dma-controller@2600000 {
+        compatible = "nvidia,tegra186-gpcdma";
+        reg = <0x2600000 0x210000>;
+        resets = <&bpmp TEGRA186_RESET_GPCDMA>;
+        reset-names = "gpcdma";
+        interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+        #dma-cells = <1>;
+        iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
+        dma-coherent;
+        dma-channel-mask = <0xfffffffe>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
index 5c2e2f156e31..4003dbe94940 100644
--- a/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
+++ b/Documentation/devicetree/bindings/dma/nvidia,tegra210-adma.yaml
@@ -14,7 +14,7 @@ maintainers:
   - Jon Hunter <jonathanh@nvidia.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
@@ -23,7 +23,9 @@ properties:
           - nvidia,tegra210-adma
           - nvidia,tegra186-adma
       - items:
-          - const: nvidia,tegra194-adma
+          - enum:
+              - nvidia,tegra234-adma
+              - nvidia,tegra194-adma
           - const: nvidia,tegra186-adma
 
   reg:
diff --git a/Documentation/devicetree/bindings/dma/owl-dma.yaml b/Documentation/devicetree/bindings/dma/owl-dma.yaml
index 93b4847554fb..ec8b3dc37ca4 100644
--- a/Documentation/devicetree/bindings/dma/owl-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/owl-dma.yaml
@@ -15,7 +15,7 @@ maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/qcom,adm.yaml b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
new file mode 100644
index 000000000000..6a9d7bc74aff
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,adm.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,adm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ADM DMA Controller
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  QCOM ADM DMA controller provides DMA capabilities for
+  peripheral buses such as NAND and SPI.
+
+properties:
+  compatible:
+    const: qcom,adm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#dma-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: phandle to the core clock
+      - description: phandle to the iface clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  resets:
+    items:
+      - description: phandle to the clk reset
+      - description: phandle to the pbus reset
+      - description: phandle to the c0 reset
+      - description: phandle to the c1 reset
+      - description: phandle to the c2 reset
+
+  reset-names:
+    items:
+      - const: clk
+      - const: pbus
+      - const: c0
+      - const: c1
+      - const: c2
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: indicates the security domain identifier used in the secure world.
+    minimum: 0
+    maximum: 255
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#dma-cells"
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - qcom,ee
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+    #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+
+    adm_dma: dma-controller@18300000 {
+        compatible = "qcom,adm";
+        reg = <0x18300000 0x100000>;
+        interrupts = <0 170 0>;
+        #dma-cells = <1>;
+
+        clocks = <&gcc ADM0_CLK>,
+                  <&gcc ADM0_PBUS_CLK>;
+        clock-names = "core", "iface";
+
+        resets = <&gcc ADM0_RESET>,
+                  <&gcc ADM0_PBUS_RESET>,
+                  <&gcc ADM0_C0_RESET>,
+                  <&gcc ADM0_C1_RESET>,
+                  <&gcc ADM0_C2_RESET>;
+        reset-names = "clk", "pbus", "c0", "c1", "c2";
+        qcom,ee = <0>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
new file mode 100644
index 000000000000..f1ddcf672261
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,bam-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc BAM DMA controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <andersson@kernel.org>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+        # APQ8064, IPQ8064 and MSM8960
+      - qcom,bam-v1.3.0
+        # MSM8974, APQ8074 and APQ8084
+      - qcom,bam-v1.4.0
+        # MSM8916 and SDM845
+      - qcom,bam-v1.7.0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: bam_clk
+
+  "#dma-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 4
+
+  num-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Indicates supported number of DMA channels in a remotely controlled bam.
+
+  qcom,controlled-remotely:
+    type: boolean
+    description:
+      Indicates that the bam is controlled by remote proccessor i.e. execution
+      environment.
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description:
+      Indicates the active Execution Environment identifier (0-7) used in the
+      secure world.
+
+  qcom,num-ees:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Indicates supported number of Execution Environments in a remotely
+      controlled bam.
+
+  qcom,powered-remotely:
+    type: boolean
+    description:
+      Indicates that the bam is powered up by a remote processor but must be
+      initialized by the local processor.
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#dma-cells"
+  - interrupts
+  - qcom,ee
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+
+    dma-controller@f9944000 {
+        compatible = "qcom,bam-v1.4.0";
+        reg = <0xf9944000 0x19000>;
+        interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+        clock-names = "bam_clk";
+        #dma-cells = <1>;
+        qcom,ee = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
index e614fe3187bb..f61145c91b6d 100644
--- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
+++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml
@@ -14,14 +14,32 @@ description: |
   peripheral buses such as I2C, UART, and SPI.
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
-    enum:
-      - qcom,sdm845-gpi-dma
-      - qcom,sm8150-gpi-dma
-      - qcom,sm8250-gpi-dma
+    oneOf:
+      - enum:
+          - qcom,sdm845-gpi-dma
+          - qcom,sm6350-gpi-dma
+      - items:
+          - enum:
+              - qcom,qcm2290-gpi-dma
+              - qcom,qdu1000-gpi-dma
+              - qcom,sc7280-gpi-dma
+              - qcom,sm6115-gpi-dma
+              - qcom,sm6375-gpi-dma
+              - qcom,sm8350-gpi-dma
+              - qcom,sm8450-gpi-dma
+              - qcom,sm8550-gpi-dma
+          - const: qcom,sm6350-gpi-dma
+      - items:
+          - enum:
+              - qcom,sdm670-gpi-dma
+              - qcom,sm6125-gpi-dma
+              - qcom,sm8150-gpi-dma
+              - qcom,sm8250-gpi-dma
+          - const: qcom,sdm845-gpi-dma
 
   reg:
     maxItems: 1
@@ -29,6 +47,7 @@ properties:
   interrupts:
     description:
       Interrupt lines for each GPI instance
+    minItems: 1
     maxItems: 13
 
   "#dma-cells":
diff --git a/Documentation/devicetree/bindings/dma/qcom_adm.txt b/Documentation/devicetree/bindings/dma/qcom_adm.txt
deleted file mode 100644
index 9d3b2f917b7b..000000000000
--- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-QCOM ADM DMA Controller
-
-Required properties:
-- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
-- reg: Address range for DMA registers
-- interrupts: Should contain one interrupt shared by all channels
-- #dma-cells: must be <2>.  First cell denotes the channel number.  Second cell
-  denotes CRCI (client rate control interface) flow control assignment.
-- clocks: Should contain the core clock and interface clock.
-- clock-names: Must contain "core" for the core clock and "iface" for the
-  interface clock.
-- resets: Must contain an entry for each entry in reset names.
-- reset-names: Must include the following entries:
-  - clk
-  - c0
-  - c1
-  - c2
-- qcom,ee: indicates the security domain identifier used in the secure world.
-
-Example:
-		adm_dma: dma@18300000 {
-			compatible = "qcom,adm";
-			reg = <0x18300000 0x100000>;
-			interrupts = <0 170 0>;
-			#dma-cells = <2>;
-
-			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-			clock-names = "core", "iface";
-
-			resets = <&gcc ADM0_RESET>,
-				<&gcc ADM0_C0_RESET>,
-				<&gcc ADM0_C1_RESET>,
-				<&gcc ADM0_C2_RESET>;
-			reset-names = "clk", "c0", "c1", "c2";
-			qcom,ee = <0>;
-		};
-
-DMA clients must use the format descripted in the dma.txt file, using a three
-cell specifier for each channel.
-
-Each dmas request consists of 3 cells:
- 1. phandle pointing to the DMA controller
- 2. channel number
- 3. CRCI assignment, if applicable.  If no CRCI flow control is required, use 0.
-    The CRCI is used for flow control.  It identifies the peripheral device that
-    is the source/destination for the transferred data.
-
-Example:
-
-	spi4: spi@1a280000 {
-		spi-max-frequency = <50000000>;
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 0>;
-
-		dmas = <&adm_dma 6 9>,
-			<&adm_dma 5 10>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
deleted file mode 100644
index cf5b9e44432c..000000000000
--- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-QCOM BAM DMA controller
-
-Required properties:
-- compatible: must be one of the following:
- * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
- * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
- * "qcom,bam-v1.7.0" for MSM8916
-- reg: Address range for DMA registers
-- interrupts: Should contain the one interrupt shared by all channels
-- #dma-cells: must be <1>, the cell in the dmas property of the client device
-  represents the channel number
-- clocks: required clock
-- clock-names: must contain "bam_clk" entry
-- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
-  the secure world.
-- qcom,controlled-remotely : optional, indicates that the bam is controlled by
-  remote proccessor i.e. execution environment.
-- num-channels : optional, indicates supported number of DMA channels in a
-  remotely controlled bam.
-- qcom,num-ees : optional, indicates supported number of Execution Environments
-  in a remotely controlled bam.
-
-Example:
-
-	uart-bam: dma@f9984000 = {
-		compatible = "qcom,bam-v1.4.0";
-		reg = <0xf9984000 0x15000>;
-		interrupts = <0 94 0>;
-		clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
-		clock-names = "bam_clk";
-		#dma-cells = <1>;
-		qcom,ee = <0>;
-	};
-
-DMA clients must use the format described in the dma.txt file, using a two cell
-specifier for each channel.
-
-Example:
-	serial@f991e000 {
-		compatible = "qcom,msm-uart";
-		reg = <0xf991e000 0x1000>
-			<0xf9944000 0x19000>;
-		interrupts = <0 108 0>;
-		clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
-			<&gcc GCC_BLSP1_AHB_CLK>;
-		clock-names = "core", "iface";
-
-		dmas = <&uart-bam 0>, <&uart-bam 1>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
index d8142cbd13d3..03aa067b1229 100644
--- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
@@ -42,7 +42,11 @@ properties:
           - const: renesas,rcar-dmac
 
       - items:
-          - const: renesas,dmac-r8a779a0 # R-Car V3U
+          - enum:
+              - renesas,dmac-r8a779a0     # R-Car V3U
+              - renesas,dmac-r8a779f0     # R-Car S4-8
+              - renesas,dmac-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-dmac # R-Car Gen4
 
   reg: true
 
@@ -117,7 +121,7 @@ if:
     compatible:
       contains:
         enum:
-          - renesas,dmac-r8a779a0
+          - renesas,rcar-gen4-dmac
 then:
   properties:
     reg:
diff --git a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
index 7a4f415d74dc..c284abc6784a 100644
--- a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
@@ -4,19 +4,21 @@
 $id: http://devicetree.org/schemas/dma/renesas,rz-dmac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas RZ/G2L DMA Controller
+title: Renesas RZ/{G2L,G2UL,V2L} DMA Controller
 
 maintainers:
   - Biju Das <biju.das.jz@bp.renesas.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
     items:
       - enum:
+          - renesas,r9a07g043-dmac # RZ/G2UL
           - renesas,r9a07g044-dmac # RZ/G2{L,LC}
+          - renesas,r9a07g054-dmac # RZ/V2L
       - const: renesas,rz-dmac
 
   reg:
@@ -52,6 +54,11 @@ properties:
       - description: DMA main clock
       - description: DMA register access clock
 
+  clock-names:
+    items:
+      - const: main
+      - const: register
+
   '#dma-cells':
     const: 1
     description:
@@ -75,16 +82,23 @@ properties:
       - description: Reset for DMA ARESETN reset terminal
       - description: Reset for DMA RST_ASYNC reset terminal
 
+  reset-names:
+    items:
+      - const: arst
+      - const: rst_async
+
 required:
   - compatible
   - reg
   - interrupts
   - interrupt-names
   - clocks
+  - clock-names
   - '#dma-cells'
   - dma-channels
   - power-domains
   - resets
+  - reset-names
 
 additionalProperties: false
 
@@ -122,9 +136,11 @@ examples:
                           "ch12", "ch13", "ch14", "ch15";
         clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>,
                  <&cpg CPG_MOD R9A07G044_DMAC_PCLK>;
+        clock-names = "main", "register";
         power-domains = <&cpg>;
         resets = <&cpg R9A07G044_DMAC_ARESETN>,
                  <&cpg R9A07G044_DMAC_RST_ASYNC>;
+        reset-names = "arst", "rst_async";
         #dma-cells = <1>;
         dma-channels = <16>;
     };
diff --git a/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
new file mode 100644
index 000000000000..ee9833dcc36c
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rzn1-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 DMA mux
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: dma-router.yaml#
+
+properties:
+  compatible:
+    const: renesas,rzn1-dmamux
+
+  reg:
+    maxItems: 1
+    description: DMA mux first register offset within the system control parent.
+
+  '#dma-cells':
+    const: 6
+    description:
+      The first four cells are dedicated to the master DMA controller. The fifth
+      cell gives the DMA mux bit index that must be set starting from 0. The
+      sixth cell gives the binary value that must be written there, ie. 0 or 1.
+
+  dma-masters:
+    minItems: 1
+    maxItems: 2
+
+  dma-requests:
+    const: 32
+
+required:
+  - reg
+  - dma-requests
+
+additionalProperties: false
+
+examples:
+  - |
+    dma-router@a0 {
+      compatible = "renesas,rzn1-dmamux";
+      reg = <0xa0 4>;
+      #dma-cells = <6>;
+      dma-masters = <&dma0 &dma1>;
+      dma-requests = <32>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml
index ab287c652b2c..17813599fccb 100644
--- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
index d32a71b975fe..a1af0b906365 100644
--- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -22,10 +22,21 @@ description: |
 
   https://static.dev.sifive.com/FU540-C000-v1.0.pdf
 
+allOf:
+  - $ref: dma-controller.yaml#
+
 properties:
   compatible:
     items:
-      - const: sifive,fu540-c000-pdma
+      - enum:
+          - sifive,fu540-c000-pdma
+      - const: sifive,pdma0
+    description:
+      Should be "sifive,<chip>-pdma" and "sifive,pdma<version>".
+      Supported compatible strings are -
+      "sifive,fu540-c000-pdma" for the SiFive PDMA v0 as integrated onto the
+      SiFive FU540 chip resp and "sifive,pdma0" for the SiFive PDMA v0 IP block
+      with no chip integration tweaks.
 
   reg:
     maxItems: 1
@@ -34,6 +45,12 @@ properties:
     minItems: 1
     maxItems: 8
 
+  dma-channels:
+    description: For backwards-compatibility, the default value is 4
+    minimum: 1
+    maximum: 4
+    default: 4
+
   '#dma-cells':
     const: 1
 
@@ -41,16 +58,16 @@ required:
   - compatible
   - reg
   - interrupts
-  - '#dma-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-    dma@3000000 {
-      compatible = "sifive,fu540-c000-pdma";
+    dma-controller@3000000 {
+      compatible = "sifive,fu540-c000-pdma", "sifive,pdma0";
       reg = <0x3000000 0x8000>;
-      interrupts = <23 24 25 26 27 28 29 30>;
+      dma-channels = <4>;
+      interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, <30>;
       #dma-cells = <1>;
     };
 
diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
index 6b35089ac017..5da8291a7de0 100644
--- a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
+++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
@@ -11,11 +11,17 @@ maintainers:
   - Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
-    const: snps,dma-spear1340
+    oneOf:
+      - const: snps,dma-spear1340
+      - items:
+          - enum:
+              - renesas,r9a06g032-dma
+          - const: renesas,rzn1-dma
+
 
   "#dma-cells":
     minimum: 3
diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
index 79e241498e25..363cf8bd150d 100644
--- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
@@ -8,19 +8,19 @@ title: Synopsys DesignWare AXI DMA Controller
 
 maintainers:
   - Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
-  - Jee Heng Sia <jee.heng.sia@intel.com>
 
 description:
   Synopsys DesignWare AXI DMA Controller DT Binding
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
     enum:
       - snps,axi-dma-1.01a
       - intel,kmb-axi-dma
+      - starfive,jh7110-axi-dma
 
   reg:
     minItems: 1
@@ -34,7 +34,12 @@ properties:
       - const: axidma_apb_regs
 
   interrupts:
-    maxItems: 1
+    description:
+      If the IP-core synthesis parameter DMAX_INTR_IO_TYPE is set to 1, this
+      will be per-channel interrupts. Otherwise, this is a single combined IRQ
+      for all channels.
+    minItems: 1
+    maxItems: 8
 
   clocks:
     items:
@@ -53,6 +58,10 @@ properties:
     minimum: 1
     maximum: 8
 
+  resets:
+    minItems: 1
+    maxItems: 2
+
   snps,dma-masters:
     description: |
       Number of AXI masters supported by the hardware.
@@ -102,25 +111,44 @@ required:
   - snps,priority
   - snps,block-size
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - starfive,jh7110-axi-dma
+then:
+  properties:
+    resets:
+      minItems: 2
+      items:
+        - description: AXI reset line
+        - description: AHB reset line
+        - description: module reset
+else:
+  properties:
+    resets:
+      maxItems: 1
+
 additionalProperties: false
 
 examples:
   - |
-     #include <dt-bindings/interrupt-controller/arm-gic.h>
-     #include <dt-bindings/interrupt-controller/irq.h>
-     /* example with snps,dw-axi-dmac */
-     dmac: dma-controller@80000 {
-         compatible = "snps,axi-dma-1.01a";
-         reg = <0x80000 0x400>;
-         clocks = <&core_clk>, <&cfgr_clk>;
-         clock-names = "core-clk", "cfgr-clk";
-         interrupt-parent = <&intc>;
-         interrupts = <27>;
-         #dma-cells = <1>;
-         dma-channels = <4>;
-         snps,dma-masters = <2>;
-         snps,data-width = <3>;
-         snps,block-size = <4096 4096 4096 4096>;
-         snps,priority = <0 1 2 3>;
-         snps,axi-max-burst-len = <16>;
-     };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    /* example with snps,dw-axi-dmac */
+    dma-controller@80000 {
+        compatible = "snps,axi-dma-1.01a";
+        reg = <0x80000 0x400>;
+        clocks = <&core_clk>, <&cfgr_clk>;
+        clock-names = "core-clk", "cfgr-clk";
+        interrupt-parent = <&intc>;
+        interrupts = <27>;
+        #dma-cells = <1>;
+        dma-channels = <4>;
+        snps,dma-masters = <2>;
+        snps,data-width = <3>;
+        snps,block-size = <4096 4096 4096 4096>;
+        snps,priority = <0 1 2 3>;
+        snps,axi-max-burst-len = <16>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
index e7bf6dd7da29..23c8a7bf24de 100644
--- a/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-mio-dmac.yaml
@@ -14,7 +14,7 @@ maintainers:
   - Masahiro Yamada <yamada.masahiro@socionext.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
index 371f18773198..da61d1ddc9c3 100644
--- a/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
+++ b/Documentation/devicetree/bindings/dma/socionext,uniphier-xdmac.yaml
@@ -15,7 +15,7 @@ maintainers:
   - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt
index adccea9941f1..c7e9b5fd50e7 100644
--- a/Documentation/devicetree/bindings/dma/sprd-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sprd-dma.txt
@@ -8,10 +8,13 @@ Required properties:
 - interrupts: Should contain one interrupt shared by all channel.
 - #dma-cells: must be <1>. Used to represent the number of integer
 	cells in the dmas property of client device.
-- #dma-channels : Number of DMA channels supported. Should be 32.
+- dma-channels : Number of DMA channels supported. Should be 32.
 - clock-names: Should contain the clock of the DMA controller.
 - clocks: Should contain a clock specifier for each entry in clock-names.
 
+Deprecated properties:
+- #dma-channels : Number of DMA channels supported. Should be 32.
+
 Example:
 
 Controller:
@@ -20,7 +23,7 @@ apdma: dma-controller@20100000 {
 	reg = <0x20100000 0x4000>;
 	interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 	#dma-cells = <1>;
-	#dma-channels = <32>;
+	dma-channels = <32>;
 	clock-names = "enable";
 	clocks = <&clk_ap_ahb_gates 5>;
 };
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
index 4bf676fd25dc..329847ef096a 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/st,stm32-dma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 DMA Controller bindings
+title: STMicroelectronics STM32 DMA Controller
 
 description: |
   The STM32 DMA is a general-purpose direct memory access controller capable of
@@ -50,10 +50,10 @@ description: |
 
 
 maintainers:
-  - Amelie Delaunay <amelie.delaunay@st.com>
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   "#dma-cells":
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
index c8d2b51d8410..e722fbcd8a5f 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dmamux.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/dma/st,stm32-dmamux.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 DMA MUX (DMA request router) bindings
+title: STMicroelectronics STM32 DMA MUX (DMA request router)
 
 maintainers:
-  - Amelie Delaunay <amelie.delaunay@st.com>
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 allOf:
-  - $ref: "dma-router.yaml#"
+  - $ref: dma-router.yaml#
 
 properties:
   "#dma-cells":
@@ -46,9 +46,8 @@ examples:
       #dma-cells = <3>;
       dma-requests = <128>;
       dma-channels = <16>;
-      dma-masters = <&dma1 &dma2>;
+      dma-masters = <&dma1>, <&dma2>;
       clocks = <&timer_clk>;
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
index c30be840be1c..3874544dfa74 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-mdma.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/st,stm32-mdma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 MDMA Controller bindings
+title: STMicroelectronics STM32 MDMA Controller
 
 description: |
   The STM32 MDMA is a general-purpose direct memory access controller capable of
@@ -50,10 +50,10 @@ description: |
        if no HW ack signal is used by the MDMA client
 
 maintainers:
-  - Amelie Delaunay <amelie.delaunay@st.com>
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 allOf:
-  - $ref: "dma-controller.yaml#"
+  - $ref: dma-controller.yaml#
 
 properties:
   "#dma-cells":
@@ -104,4 +104,3 @@ examples:
     };
 
 ...
-
diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
deleted file mode 100644
index 99ab5c4d331e..000000000000
--- a/Documentation/devicetree/bindings/dma/ste-dma40.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-* DMA40 DMA Controller
-
-Required properties:
-- compatible: "stericsson,dma40"
-- reg: Address range of the DMAC registers
-- reg-names: Names of the above areas to use during resource look-up
-- interrupt: Should contain the DMAC interrupt number
-- #dma-cells: must be <3>
-- memcpy-channels: Channels to be used for memcpy
-
-Optional properties:
-- dma-channels: Number of channels supported by hardware - if not present
-		the driver will attempt to obtain the information from H/W
-- disabled-channels: Channels which can not be used
-
-Example:
-
-	dma: dma-controller@801c0000 {
-		compatible = "stericsson,db8500-dma40", "stericsson,dma40";
-		reg = <0x801C0000 0x1000  0x40010000 0x800>;
-		reg-names = "base", "lcpa";
-		interrupt-parent = <&intc>;
-		interrupts = <0 25 0x4>;
-
-		#dma-cells = <2>;
-		memcpy-channels  = <56 57 58 59 60>;
-		disabled-channels  = <12>;
-		dma-channels = <8>;
-	};
-
-Clients
-Required properties:
-- dmas: Comma separated list of dma channel requests
-- dma-names: Names of the aforementioned requested channels
-
-Each dmas request consists of 4 cells:
-  1. A phandle pointing to the DMA controller
-  2. Device signal number, the signal line for single and burst requests
-     connected from the device to the DMA40 engine
-  3. The DMA request line number (only when 'use fixed channel' is set)
-  4. A 32bit mask specifying; mode, direction and endianness
-     [NB: This list will grow]
-        0x00000001: Mode:
-                Logical channel when unset
-                Physical channel when set
-        0x00000002: Direction:
-                Memory to Device when unset
-                Device to Memory when set
-        0x00000004: Endianness:
-                Little endian when unset
-                Big endian when set
-        0x00000008: Use fixed channel:
-                Use automatic channel selection when unset
-                Use DMA request line number when set
-        0x00000010: Set channel as high priority:
-                Normal priority when unset
-                High priority when set
-
-Existing signal numbers for the DB8500 ASIC. Unless specified, the signals are
-bidirectional, i.e. the same for RX and TX operations:
-
-0:  SPI controller 0
-1:  SD/MMC controller 0 (unused)
-2:  SD/MMC controller 1 (unused)
-3:  SD/MMC controller 2 (unused)
-4:  I2C port 1
-5:  I2C port 3
-6:  I2C port 2
-7:  I2C port 4
-8:  Synchronous Serial Port SSP0
-9:  Synchronous Serial Port SSP1
-10: Multi-Channel Display Engine MCDE RX
-11: UART port 2
-12: UART port 1
-13: UART port 0
-14: Multirate Serial Port MSP2
-15: I2C port 0
-16: USB OTG in/out endpoints 7 & 15
-17: USB OTG in/out endpoints 6 & 14
-18: USB OTG in/out endpoints 5 & 13
-19: USB OTG in/out endpoints 4 & 12
-20: SLIMbus or HSI channel 0
-21: SLIMbus or HSI channel 1
-22: SLIMbus or HSI channel 2
-23: SLIMbus or HSI channel 3
-24: Multimedia DSP SXA0
-25: Multimedia DSP SXA1
-26: Multimedia DSP SXA2
-27: Multimedia DSP SXA3
-28: SD/MM controller 2
-29: SD/MM controller 0
-30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
-31: MSP port 0 or SLIMbus channel 0
-32: SD/MM controller 1
-33: SPI controller 2
-34: i2c3 RX2 TX2
-35: SPI controller 1
-36: USB OTG in/out endpoints 3 & 11
-37: USB OTG in/out endpoints 2 & 10
-38: USB OTG in/out endpoints 1 & 9
-39: USB OTG in/out endpoints 8
-40: SPI controller 3
-41: SD/MM controller 3
-42: SD/MM controller 4
-43: SD/MM controller 5
-44: Multimedia DSP SXA4
-45: Multimedia DSP SXA5
-46: SLIMbus channel 8 or Multimedia DSP SXA6
-47: SLIMbus channel 9 or Multimedia DSP SXA7
-48: Crypto Accelerator 1
-49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
-50: Hash Accelerator 1 TX
-51: memcpy TX (to be used by the DMA driver for memcpy operations)
-52: SLIMbus or HSI channel 4
-53: SLIMbus or HSI channel 5
-54: SLIMbus or HSI channel 6
-55: SLIMbus or HSI channel 7
-56: memcpy (to be used by the DMA driver for memcpy operations)
-57: memcpy (to be used by the DMA driver for memcpy operations)
-58: memcpy (to be used by the DMA driver for memcpy operations)
-59: memcpy (to be used by the DMA driver for memcpy operations)
-60: memcpy (to be used by the DMA driver for memcpy operations)
-61: Crypto Accelerator 0
-62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
-63: Hash Accelerator 0 TX
-
-Example:
-
-	uart@80120000 {
-		compatible = "arm,pl011", "arm,primecell";
-		reg = <0x80120000 0x1000>;
-		interrupts = <0 11 0x4>;
-
-		dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
-		       <&dma 13 0 0x0>; /* Logical - MemToDev */
-		dma-names = "rx", "rx";
-
-	};
diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
new file mode 100644
index 000000000000..64845347f44d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/stericsson,dma40.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson DMA40 DMA Engine
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: dma-controller.yaml#
+
+properties:
+  "#dma-cells":
+    const: 3
+    description: |
+      The first cell is the unique device channel number as indicated by this
+      table for DB8500 which is the only ASIC known to use DMA40:
+
+      0:  SPI controller 0
+      1:  SD/MMC controller 0 (unused)
+      2:  SD/MMC controller 1 (unused)
+      3:  SD/MMC controller 2 (unused)
+      4:  I2C port 1
+      5:  I2C port 3
+      6:  I2C port 2
+      7:  I2C port 4
+      8:  Synchronous Serial Port SSP0
+      9:  Synchronous Serial Port SSP1
+      10: Multi-Channel Display Engine MCDE RX
+      11: UART port 2
+      12: UART port 1
+      13: UART port 0
+      14: Multirate Serial Port MSP2
+      15: I2C port 0
+      16: USB OTG in/out endpoints 7 & 15
+      17: USB OTG in/out endpoints 6 & 14
+      18: USB OTG in/out endpoints 5 & 13
+      19: USB OTG in/out endpoints 4 & 12
+      20: SLIMbus or HSI channel 0
+      21: SLIMbus or HSI channel 1
+      22: SLIMbus or HSI channel 2
+      23: SLIMbus or HSI channel 3
+      24: Multimedia DSP SXA0
+      25: Multimedia DSP SXA1
+      26: Multimedia DSP SXA2
+      27: Multimedia DSP SXA3
+      28: SD/MMC controller 2
+      29: SD/MMC controller 0
+      30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
+      31: MSP port 0 or SLIMbus channel 0
+      32: SD/MMC controller 1
+      33: SPI controller 2
+      34: i2c3 RX2 TX2
+      35: SPI controller 1
+      36: USB OTG in/out endpoints 3 & 11
+      37: USB OTG in/out endpoints 2 & 10
+      38: USB OTG in/out endpoints 1 & 9
+      39: USB OTG in/out endpoints 8
+      40: SPI controller 3
+      41: SD/MMC controller 3
+      42: SD/MMC controller 4
+      43: SD/MMC controller 5
+      44: Multimedia DSP SXA4
+      45: Multimedia DSP SXA5
+      46: SLIMbus channel 8 or Multimedia DSP SXA6
+      47: SLIMbus channel 9 or Multimedia DSP SXA7
+      48: Crypto Accelerator 1
+      49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
+      50: Hash Accelerator 1 TX
+      51: memcpy TX (to be used by the DMA driver for memcpy operations)
+      52: SLIMbus or HSI channel 4
+      53: SLIMbus or HSI channel 5
+      54: SLIMbus or HSI channel 6
+      55: SLIMbus or HSI channel 7
+      56: memcpy (to be used by the DMA driver for memcpy operations)
+      57: memcpy (to be used by the DMA driver for memcpy operations)
+      58: memcpy (to be used by the DMA driver for memcpy operations)
+      59: memcpy (to be used by the DMA driver for memcpy operations)
+      60: memcpy (to be used by the DMA driver for memcpy operations)
+      61: Crypto Accelerator 0
+      62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
+      63: Hash Accelerator 0 TX
+
+      The second cell is the DMA request line number. This is only used when
+      a fixed channel is allocated, and indicated by setting bit 3 in the
+      flags field (see below).
+
+      The third cell is a 32bit flags bitfield with the following possible
+      bits set:
+      0x00000001 (bit 0) - mode:
+        Logical channel when unset
+        Physical channel when set
+      0x00000002 (bit 1) - direction:
+        Memory to Device when unset
+        Device to Memory when set
+      0x00000004 (bit 2) - endianness:
+        Little endian when unset
+        Big endian when set
+      0x00000008 (bit 3) - use fixed channel:
+        Use automatic channel selection when unset
+        Use DMA request line number when set
+      0x00000010 (bit 4) - set channel as high priority:
+        Normal priority when unset
+        High priority when set
+
+  compatible:
+    items:
+      - const: stericsson,db8500-dma40
+      - const: stericsson,dma40
+
+  reg:
+    items:
+      - description: DMA40 memory base
+      - description: LCPA memory base
+
+  reg-names:
+    items:
+      - const: base
+      - const: lcpa
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  memcpy-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Array of u32 elements indicating which channels on the DMA
+      engine are elegible for memcpy transfers
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - memcpy-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mfd/dbx500-prcmu.h>
+    dma-controller@801c0000 {
+        compatible = "stericsson,db8500-dma40", "stericsson,dma40";
+        reg = <0x801c0000 0x1000>, <0x40010000 0x800>;
+        reg-names = "base", "lcpa";
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+        #dma-cells = <3>;
+        memcpy-channels = <56 57 58 59 60>;
+        clocks = <&prcmu_clk PRCMU_DMACLK>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
index b849a1ed389d..47e477cce6d2 100644
--- a/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
+++ b/Documentation/devicetree/bindings/dma/ti-dma-crossbar.txt
@@ -4,7 +4,7 @@ Required properties:
 - compatible:	"ti,dra7-dma-crossbar" for DRA7xx DMA crossbar
 		"ti,am335x-edma-crossbar" for AM335x and AM437x
 - reg:		Memory map for accessing module
-- #dma-cells:	Should be set to to match with the DMA controller's dma-cells
+- #dma-cells:	Should be set to match with the DMA controller's dma-cells
 		for ti,dra7-dma-crossbar and <3> for ti,am335x-edma-crossbar.
 - dma-requests:	Number of DMA requests the crossbar can receive
 - dma-masters:	phandle pointing to the DMA controller
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
index df29d59d13a8..beecfe7a1732 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-bcdma.yaml
@@ -6,7 +6,7 @@
 $id: http://devicetree.org/schemas/dma/ti/k3-bcdma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments K3 DMSS BCDMA Device Tree Bindings
+title: Texas Instruments K3 DMSS BCDMA
 
 maintainers:
   - Peter Ujfalusi <peter.ujfalusi@gmail.com>
@@ -28,12 +28,19 @@ description: |
   PDMAs can be configured via BCDMA split channel's peer registers to match with
   the configuration of the legacy peripheral.
 
-allOf:
-  - $ref: /schemas/dma/dma-controller.yaml#
-
 properties:
   compatible:
-    const: ti,am64-dmss-bcdma
+    enum:
+      - ti,am62a-dmss-bcdma-csirx
+      - ti,am64-dmss-bcdma
+
+  reg:
+    minItems: 3
+    maxItems: 5
+
+  reg-names:
+    minItems: 3
+    maxItems: 5
 
   "#dma-cells":
     const: 3
@@ -64,19 +71,13 @@ properties:
 
       cell 3: ASEL value for the channel
 
-  reg:
-    maxItems: 5
-
-  reg-names:
-    items:
-      - const: gcfg
-      - const: bchanrt
-      - const: rchanrt
-      - const: tchanrt
-      - const: ringrt
-
   msi-parent: true
 
+  power-domains:
+    description:
+      Power domain if available
+    maxItems: 1
+
   ti,asel:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: ASEL value for non slave channels
@@ -122,10 +123,51 @@ required:
   - msi-parent
   - ti,sci
   - ti,sci-dev-id
-  - ti,sci-rm-range-bchan
-  - ti,sci-rm-range-tchan
   - ti,sci-rm-range-rchan
 
+allOf:
+  - $ref: /schemas/dma/dma-controller.yaml#
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am62a-dmss-bcdma-csirx
+    then:
+      properties:
+        ti,sci-rm-range-bchan: false
+        ti,sci-rm-range-tchan: false
+
+        reg:
+          maxItems: 3
+
+        reg-names:
+          items:
+            - const: gcfg
+            - const: rchanrt
+            - const: ringrt
+
+      required:
+        - power-domains
+
+    else:
+      properties:
+        reg:
+          minItems: 5
+
+        reg-names:
+          items:
+            - const: gcfg
+            - const: bchanrt
+            - const: rchanrt
+            - const: tchanrt
+            - const: ringrt
+
+      required:
+        - ti,sci-rm-range-bchan
+        - ti,sci-rm-range-tchan
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
index ea19d12a9337..a69f62f854d8 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-pktdma.yaml
@@ -6,7 +6,7 @@
 $id: http://devicetree.org/schemas/dma/ti/k3-pktdma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments K3 DMSS PKTDMA Device Tree Bindings
+title: Texas Instruments K3 DMSS PKTDMA
 
 maintainers:
   - Peter Ujfalusi <peter.ujfalusi@gmail.com>
@@ -25,6 +25,7 @@ description: |
 
 allOf:
   - $ref: /schemas/dma/dma-controller.yaml#
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
index 6a09bbf83d46..22f6c5e2f7f4 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
@@ -6,7 +6,7 @@
 $id: http://devicetree.org/schemas/dma/ti/k3-udma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments K3 NAVSS Unified DMA Device Tree Bindings
+title: Texas Instruments K3 NAVSS Unified DMA
 
 maintainers:
   - Peter Ujfalusi <peter.ujfalusi@gmail.com>
@@ -43,7 +43,8 @@ description: |
   configuration of the legacy peripheral.
 
 allOf:
-  - $ref: "../dma-controller.yaml#"
+  - $ref: ../dma-controller.yaml#
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
 
 properties:
   "#dma-cells":
@@ -78,14 +79,6 @@ properties:
 
   msi-parent: true
 
-  ti,sci:
-    description: phandle to TI-SCI compatible System controller node
-    $ref: /schemas/types.yaml#/definitions/phandle
-
-  ti,sci-dev-id:
-    description: TI-SCI device id of UDMAP
-    $ref: /schemas/types.yaml#/definitions/uint32
-
   ti,ringacc:
     description: phandle to the ring accelerator node
     $ref: /schemas/types.yaml#/definitions/phandle
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index 325aca52cd43..d1700a5c36bf 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -110,7 +110,11 @@ axi_vdma_0: axivdma@40030000 {
 Required properties:
 - dmas: a list of <[Video DMA device phandle] [Channel ID]> pairs,
 	where Channel ID is '0' for write/tx and '1' for read/rx
-	channel.
+	channel. For MCMDA, MM2S channel(write/tx) ID start from
+	'0' and is in [0-15] range. S2MM channel(read/rx) ID start
+	from '16' and is in [16-31] range. These channels ID are
+	fixed irrespective of IP configuration.
+
 - dma-names: a list of DMA channel names, one per "dmas" entry
 
 Example:
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
new file mode 100644
index 000000000000..23ada8f87526
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP DMA Engine
+
+description: |
+  The Xilinx ZynqMP DMA engine supports memory to memory transfers,
+  memory to device and device to memory transfers. It also has flow
+  control and rate control support for slave/peripheral dma access.
+
+maintainers:
+  - Michael Tretter <m.tretter@pengutronix.de>
+
+allOf:
+  - $ref: ../dma-controller.yaml#
+
+properties:
+  "#dma-cells":
+    const: 1
+
+  compatible:
+    const: xlnx,zynqmp-dma-1.0
+
+  reg:
+    description: memory map for gdma/adma module access
+    maxItems: 1
+
+  interrupts:
+    description: DMA channel interrupt
+    maxItems: 1
+
+  clocks:
+    description: input clocks
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk_main
+      - const: clk_apb
+
+  xlnx,bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 64
+      - 128
+    description: AXI bus width in bits
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  dma-coherent:
+    description: present if dma operations are coherent
+
+required:
+  - "#dma-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+
+    fpd_dma_chan1: dma-controller@fd500000 {
+      compatible = "xlnx,zynqmp-dma-1.0";
+      reg = <0xfd500000 0x1000>;
+      interrupt-parent = <&gic>;
+      interrupts = <0 117 0x4>;
+      #dma-cells = <1>;
+      clock-names = "clk_main", "clk_apb";
+      clocks = <&zynqmp_clk GDMA_REF>, <&zynqmp_clk LPD_LSBUS>;
+      xlnx,bus-width = <128>;
+      dma-coherent;
+    };
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
index 2a595b18ff6c..d6cbd95ec26d 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
+++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/dma/xilinx/xlnx,zynqmp-dpdma.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx ZynqMP DisplayPort DMA Controller Device Tree Bindings
+title: Xilinx ZynqMP DisplayPort DMA Controller
 
 description: |
   These bindings describe the DMA engine included in the Xilinx ZynqMP
@@ -16,7 +16,7 @@ maintainers:
   - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 
 allOf:
-  - $ref: "../dma-controller.yaml#"
+  - $ref: ../dma-controller.yaml#
 
 properties:
   "#dma-cells":
diff --git a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
deleted file mode 100644
index 07a5a7aa9ea0..000000000000
--- a/Documentation/devicetree/bindings/dma/xilinx/zynqmp_dma.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Xilinx ZynqMP DMA engine, it does support memory to memory transfers,
-memory to device and device to memory transfers. It also has flow
-control and rate control support for slave/peripheral dma access.
-
-Required properties:
-- compatible		: Should be "xlnx,zynqmp-dma-1.0"
-- reg			: Memory map for gdma/adma module access.
-- interrupts		: Should contain DMA channel interrupt.
-- xlnx,bus-width	: Axi buswidth in bits. Should contain 128 or 64
-- clock-names		: List of input clocks "clk_main", "clk_apb"
-			  (see clock bindings for details)
-
-Optional properties:
-- dma-coherent		: Present if dma operations are coherent.
-
-Example:
-++++++++
-fpd_dma_chan1: dma@fd500000 {
-	compatible = "xlnx,zynqmp-dma-1.0";
-	reg = <0x0 0xFD500000 0x1000>;
-	interrupt-parent = <&gic>;
-	interrupts = <0 117 4>;
-	clock-names = "clk_main", "clk_apb";
-	xlnx,bus-width = <128>;
-	dma-coherent;
-};
diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
index 7afc9f2be13a..9af40da5688e 100644
--- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
+++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
@@ -8,6 +8,7 @@ title: NXP i.MX8 DSP core
 
 maintainers:
   - Daniel Baluta <daniel.baluta@nxp.com>
+  - Shengjiu Wang <shengjiu.wang@nxp.com>
 
 description: |
   Some boards from i.MX8 family contain a DSP core used for
@@ -19,6 +20,11 @@ properties:
       - fsl,imx8qxp-dsp
       - fsl,imx8qm-dsp
       - fsl,imx8mp-dsp
+      - fsl,imx8ulp-dsp
+      - fsl,imx8qxp-hifi4
+      - fsl,imx8qm-hifi4
+      - fsl,imx8mp-hifi4
+      - fsl,imx8ulp-hifi4
 
   reg:
     maxItems: 1
@@ -28,37 +34,53 @@ properties:
       - description: ipg clock
       - description: ocram clock
       - description: core clock
+      - description: debug interface clock
+      - description: message unit clock
+    minItems: 3
 
   clock-names:
     items:
       - const: ipg
       - const: ocram
       - const: core
+      - const: debug
+      - const: mu
+    minItems: 3
 
   power-domains:
     description:
       List of phandle and PM domain specifier as documented in
       Documentation/devicetree/bindings/power/power_domain.txt
+    minItems: 1
     maxItems: 4
 
   mboxes:
     description:
       List of <&phandle type channel> - 2 channels for TXDB, 2 channels for RXDB
+      or - 1 channel for TX, 1 channel for RX, 1 channel for RXDB
       (see mailbox/fsl,mu.txt)
+    minItems: 3
     maxItems: 4
 
   mbox-names:
-    items:
-      - const: txdb0
-      - const: txdb1
-      - const: rxdb0
-      - const: rxdb1
+    minItems: 3
+    maxItems: 4
 
   memory-region:
     description:
       phandle to a node describing reserved memory (System RAM memory)
       used by DSP (see bindings/reserved-memory/reserved-memory.txt)
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
+
+  firmware-name:
+    description: |
+      Default name of the firmware to load to the remote processor.
+
+  fsl,dsp-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to syscon block which provide access for processor enablement
 
 required:
   - compatible
@@ -70,6 +92,58 @@ required:
   - mbox-names
   - memory-region
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-dsp
+              - fsl,imx8qm-dsp
+              - fsl,imx8qxp-hifi4
+              - fsl,imx8qm-hifi4
+    then:
+      properties:
+        power-domains:
+          minItems: 4
+    else:
+      properties:
+        power-domains:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qxp-hifi4
+              - fsl,imx8qm-hifi4
+              - fsl,imx8mp-hifi4
+              - fsl,imx8ulp-hifi4
+    then:
+      properties:
+        memory-region:
+          minItems: 4
+        mboxes:
+          maxItems: 3
+        mbox-names:
+          items:
+            - const: tx
+            - const: rx
+            - const: rxdb
+    else:
+      properties:
+        memory-region:
+          maxItems: 1
+        mboxes:
+          minItems: 4
+        mbox-names:
+          items:
+            - const: txdb0
+            - const: txdb1
+            - const: rxdb0
+            - const: rxdb1
+
 additionalProperties: false
 
 examples:
@@ -91,3 +165,41 @@ examples:
         mboxes = <&lsio_mu13 2 0>, <&lsio_mu13 2 1>, <&lsio_mu13 3 0>, <&lsio_mu13 3 1>;
         memory-region = <&dsp_reserved>;
     };
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    dsp_reserved: dsp@92400000 {
+      reg = <0x92400000 0x1000000>;
+      no-map;
+    };
+    dsp_vdev0vring0: vdev0vring0@942f0000 {
+      reg = <0x942f0000 0x8000>;
+      no-map;
+    };
+    dsp_vdev0vring1: vdev0vring1@942f8000 {
+      reg = <0x942f8000 0x8000>;
+      no-map;
+    };
+    dsp_vdev0buffer: vdev0buffer@94300000 {
+      compatible = "shared-dma-pool";
+      reg = <0x94300000 0x100000>;
+      no-map;
+    };
+
+    dsp: dsp@3b6e8000 {
+      compatible = "fsl,imx8mp-hifi4";
+      reg = <0x3b6e8000 0x88000>;
+      clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+               <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_OCRAMA_IPG>,
+               <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+               <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSPDBG_ROOT>;
+      clock-names = "ipg", "ocram", "core", "debug";
+      firmware-name = "imx/dsp/hifi4.bin";
+      power-domains = <&audiomix_pd>;
+      mbox-names = "tx", "rx", "rxdb";
+      mboxes = <&mu2 0 0>,
+               <&mu2 1 0>,
+               <&mu2 3 0>;
+      memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+                      <&dsp_vdev0vring1>, <&dsp_reserved>;
+      fsl,dsp-ctrl = <&audio_blk_ctrl>;
+    };
diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
new file mode 100644
index 000000000000..88575da1e6d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dsp/mediatek,mt8186-dsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek mt8186 DSP core
+
+maintainers:
+  - Tinghan Shen <tinghan.shen@mediatek.com>
+
+description: |
+  MediaTek mt8186 SoC contains a DSP core used for
+  advanced pre- and post- audio processing.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8186-dsp
+      - mediatek,mt8188-dsp
+
+  reg:
+    items:
+      - description: Address and size of the DSP config registers
+      - description: Address and size of the DSP SRAM
+      - description: Address and size of the DSP secure registers
+      - description: Address and size of the DSP bus registers
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: sram
+      - const: sec
+      - const: bus
+
+  clocks:
+    items:
+      - description: mux for audio dsp clock
+      - description: mux for audio dsp local bus
+
+  clock-names:
+    items:
+      - const: audiodsp
+      - const: adsp_bus
+
+  power-domains:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: mailbox for receiving audio DSP requests.
+      - description: mailbox for transmitting requests to audio DSP.
+
+  mbox-names:
+    items:
+      - const: rx
+      - const: tx
+
+  memory-region:
+    items:
+      - description: dma buffer between host and DSP.
+      - description: DSP system memory.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - power-domains
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8186-clk.h>
+    dsp@10680000 {
+        compatible = "mediatek,mt8186-dsp";
+        reg = <0x10680000 0x2000>,
+              <0x10800000 0x100000>,
+              <0x1068b000 0x100>,
+              <0x1068f000 0x1000>;
+        reg-names = "cfg", "sram", "sec", "bus";
+        clocks = <&topckgen CLK_TOP_AUDIODSP>,
+                 <&topckgen CLK_TOP_ADSP_BUS>;
+        clock-names = "audiodsp",
+                      "adsp_bus";
+        power-domains = <&spm 6>;
+        mbox-names = "rx", "tx";
+        mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+    };
diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
new file mode 100644
index 000000000000..ca8d8661f872
--- /dev/null
+++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8195-dsp.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dsp/mediatek,mt8195-dsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek mt8195 DSP core
+
+maintainers:
+  - YC Hung <yc.hung@mediatek.com>
+
+description: |
+  Some boards from mt8195 contain a DSP core used for
+  advanced pre- and post- audio processing.
+
+properties:
+  compatible:
+    const: mediatek,mt8195-dsp
+
+  reg:
+    items:
+      - description: Address and size of the DSP Cfg registers
+      - description: Address and size of the DSP SRAM
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: sram
+
+  clocks:
+    items:
+      - description: mux for audio dsp clock
+      - description: 26M clock
+      - description: mux for audio dsp local bus
+      - description: default audio dsp local bus clock source
+      - description: clock gate for audio dsp clock
+      - description: mux for audio dsp access external bus
+
+  clock-names:
+    items:
+      - const: adsp_sel
+      - const: clk26m_ck
+      - const: audio_local_bus
+      - const: mainpll_d7_d2
+      - const: scp_adsp_audiodsp
+      - const: audio_h
+
+  power-domains:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: mailbox for receiving audio DSP requests.
+      - description: mailbox for transmitting requests to audio DSP.
+
+  mbox-names:
+    items:
+      - const: rx
+      - const: tx
+
+  memory-region:
+    items:
+      - description: dma buffer between host and DSP.
+      - description: DSP system memory.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - memory-region
+  - power-domains
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    dsp@10803000 {
+       compatible =  "mediatek,mt8195-dsp";
+       reg = <0x10803000  0x1000>,
+             <0x10840000  0x40000>;
+       reg-names = "cfg", "sram";
+       clocks = <&topckgen 10>, //CLK_TOP_ADSP
+                <&clk26m>,
+                <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS
+                <&topckgen 136>, //CLK_TOP_MAINPLL_D7_D2
+                <&scp_adsp 0>, //CLK_SCP_ADSP_AUDIODSP
+                <&topckgen 34>; //CLK_TOP_AUDIO_H
+       clock-names = "adsp_sel",
+                     "clk26m_ck",
+                     "audio_local_bus",
+                     "mainpll_d7_d2",
+                     "scp_adsp_audiodsp",
+                     "audio_h";
+       memory-region = <&adsp_dma_mem_reserved>,
+                       <&adsp_mem_reserved>;
+       power-domains = <&spm 6>; //MT8195_POWER_DOMAIN_ADSP
+       mbox-names = "rx", "tx";
+       mboxes = <&adsp_mailbox0>, <&adsp_mailbox1>;
+    };
diff --git a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
index c8b91207f34d..1dcb85a02a76 100644
--- a/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
+++ b/Documentation/devicetree/bindings/dvfs/performance-domain.yaml
@@ -43,7 +43,6 @@ properties:
 
   performance-domains:
     $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
     description:
       A phandle and performance domain specifier as defined by bindings of the
       performance controller/provider specified by phandle.
@@ -52,10 +51,16 @@ additionalProperties: true
 
 examples:
   - |
-    performance: performance-controller@12340000 {
-        compatible = "qcom,cpufreq-hw";
-        reg = <0x12340000 0x1000>;
-        #performance-domain-cells = <1>;
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        performance: performance-controller@11bc00 {
+            compatible = "mediatek,cpufreq-hw";
+            reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+
+            #performance-domain-cells = <1>;
+        };
     };
 
     // The node above defines a performance controller that is a performance
diff --git a/Documentation/devicetree/bindings/edac/dmc-520.yaml b/Documentation/devicetree/bindings/edac/dmc-520.yaml
index 3b6842e92d1b..84db3966662a 100644
--- a/Documentation/devicetree/bindings/edac/dmc-520.yaml
+++ b/Documentation/devicetree/bindings/edac/dmc-520.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/edac/dmc-520.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ARM DMC-520 EDAC bindings
+title: ARM DMC-520 EDAC
 
 maintainers:
   - Lei Wang <lewan@microsoft.com>
diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt
deleted file mode 100644
index c94acbb8cb0c..000000000000
--- a/Documentation/devicetree/bindings/eeprom/at24.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has been moved to at24.yaml.
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index 914a423ec449..84af0d5f52aa 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -10,6 +10,9 @@ title: I2C EEPROMs compatible with Atmel's AT24
 maintainers:
   - Bartosz Golaszewski <bgolaszewski@baylibre.com>
 
+allOf:
+  - $ref: /schemas/nvmem/nvmem.yaml
+
 select:
   properties:
     compatible:
@@ -87,6 +90,10 @@ properties:
               - items:
                   pattern: cs1024$
               - items:
+                  pattern: c1025$
+              - items:
+                  pattern: cs1025$
+              - items:
                   pattern: c2048$
               - items:
                   pattern: cs2048$
@@ -95,26 +102,31 @@ properties:
       # These are special cases that don't conform to the above pattern.
       # Each requires a standard at24 model as fallback.
       - items:
-          - const: nxp,se97b
-          - const: atmel,24c02
+          - enum:
+              - rohm,br24g01
+              - rohm,br24t01
+          - const: atmel,24c01
       - items:
-          - const: renesas,r1ex24002
+          - enum:
+              - nxp,se97b
+              - renesas,r1ex24002
           - const: atmel,24c02
       - items:
+          - enum:
+              - onnn,cat24c04
+              - onnn,cat24c05
+          - const: atmel,24c04
+      - items:
           - const: renesas,r1ex24016
           - const: atmel,24c16
       - items:
           - const: giantec,gt24c32a
           - const: atmel,24c32
       - items:
-          - const: renesas,r1ex24128
+          - enum:
+              - renesas,r1ex24128
+              - samsung,s524ad0xd1
           - const: atmel,24c128
-      - items:
-          - const: rohm,br24g01
-          - const: atmel,24c01
-      - items:
-          - const: rohm,br24t01
-          - const: atmel,24c01
 
   label:
     description: Descriptive name of the EEPROM.
@@ -174,7 +186,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml
index fbf99e346966..11e2a95a7bcb 100644
--- a/Documentation/devicetree/bindings/eeprom/at25.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at25.yaml
@@ -44,8 +44,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   pagesize:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072]
@@ -105,6 +103,8 @@ required:
   - spi-max-frequency
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - $ref: /schemas/nvmem/nvmem.yaml
   - if:
       properties:
         compatible:
@@ -117,12 +117,12 @@ allOf:
         - size
         - address-width
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/eeprom/microchip,93lc46b.yaml b/Documentation/devicetree/bindings/eeprom/microchip,93lc46b.yaml
new file mode 100644
index 000000000000..144e86ce5c0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/eeprom/microchip,93lc46b.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/eeprom/microchip,93lc46b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip 93xx46 SPI compatible EEPROM family
+
+maintainers:
+  - Cory Tusar <cory.tusar@pid1solutions.com>
+
+properties:
+  compatible:
+    enum:
+      - atmel,at93c46
+      - atmel,at93c46d
+      - atmel,at93c56
+      - atmel,at93c66
+      - eeprom-93xx46
+      - microchip,93lc46b
+
+  data-size:
+    description: number of data bits per word
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+
+  reg:
+    description: chip select of EEPROM
+    maxItems: 1
+
+  read-only:
+    description:
+      parameter-less property which disables writes to the EEPROM
+    type: boolean
+
+  select-gpios:
+    description:
+      specifies the GPIO that needs to be asserted prior to each access
+      of EEPROM (e.g. for SPI bus multiplexing)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - data-size
+  - spi-max-frequency
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - $ref: /schemas/nvmem/nvmem.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      eeprom@0 {
+        compatible = "eeprom-93xx46";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cs-high;
+        data-size = <8>;
+        select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/example-schema.yaml b/Documentation/devicetree/bindings/example-schema.yaml
index ff6ec65145cf..f4eec4c42fb3 100644
--- a/Documentation/devicetree/bindings/example-schema.yaml
+++ b/Documentation/devicetree/bindings/example-schema.yaml
@@ -11,7 +11,7 @@ $id: http://devicetree.org/schemas/example-schema.yaml#
 # $schema is the meta-schema this schema should be validated with.
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: An example schema annotated with jsonschema details
+title: An Example Device
 
 maintainers:
   - Rob Herring <robh@kernel.org>
@@ -119,7 +119,7 @@ properties:
     # valid for this binding.
 
   clock-frequency:
-    # The type is set in the core schema. Per device schema only need to set
+    # The type is set in the core schema. Per-device schema only need to set
     # constraints on the possible values.
     minimum: 100
     maximum: 400000
@@ -133,24 +133,24 @@ properties:
   # *-supply is always a single phandle, so nothing more to define.
   foo-supply: true
 
-  # Vendor specific properties
+  # Vendor-specific properties
   #
-  # Vendor specific properties have slightly different schema requirements than
+  # Vendor-specific properties have slightly different schema requirements than
   # common properties. They must have at least a type definition and
   # 'description'.
   vendor,int-property:
-    description: Vendor specific properties must have a description
+    description: Vendor-specific properties must have a description
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [2, 4, 6, 8, 10]
 
   vendor,bool-property:
-    description: Vendor specific properties must have a description. Boolean
+    description: Vendor-specific properties must have a description. Boolean
       properties are one case where the json-schema 'type' keyword can be used
       directly.
     type: boolean
 
   vendor,string-array-property:
-    description: Vendor specific properties should reference a type in the
+    description: Vendor-specific properties should reference a type in the
       core schema.
     $ref: /schemas/types.yaml#/definitions/string-array
     items:
@@ -158,14 +158,26 @@ properties:
       - enum: [baz, boo]
 
   vendor,property-in-standard-units-microvolt:
-    description: Vendor specific properties having a standard unit suffix
+    description: Vendor-specific properties having a standard unit suffix
       don't need a type.
     enum: [ 100, 200, 300 ]
 
+  vendor,int-array-variable-length-and-constrained-values:
+    description: Array might define what type of elements might be used (e.g.
+      their range).
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 3
+    items:
+      minimum: 0
+      maximum: 8
+
   child-node:
     description: Child nodes are just another property from a json-schema
       perspective.
     type: object  # DT nodes are json objects
+    # Child nodes also need additionalProperties or unevaluatedProperties
+    additionalProperties: false
     properties:
       vendor,a-child-node-property:
         description: Child node properties have all the same schema
@@ -207,6 +219,10 @@ allOf:
     then:
       required:
         - foo-supply
+    else:
+      # If otherwise the property is not allowed:
+      properties:
+        foo-supply: false
   # Altering schema depending on presence of properties is usually done by
   # dependencies (see above), however some adjustments might require if:
   - if:
@@ -235,13 +251,13 @@ examples:
   # be overridden or an appropriate parent bus node should be shown (such as on
   # i2c buses).
   #
-  # Any includes used have to be explicitly included.
+  # Any includes used have to be explicitly included. Use 4-space indentation.
   - |
     node@1000 {
-          compatible = "vendor,soc4-ip", "vendor,soc1-ip";
-          reg = <0x1000 0x80>,
-                <0x3000 0x80>;
-          reg-names = "core", "aux";
-          interrupts = <10>;
-          interrupt-controller;
+        compatible = "vendor,soc4-ip", "vendor,soc1-ip";
+        reg = <0x1000 0x80>,
+              <0x3000 0x80>;
+        reg-names = "core", "aux";
+        interrupts = <10>;
+        interrupt-controller;
     };
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
index 20e1ccfc8630..e00c8072bae9 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
@@ -8,7 +8,6 @@ title: ChromeOS EC USB Type-C cable and accessories detection
 
 maintainers:
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   On ChromeOS systems with USB Type C ports, the ChromeOS Embedded Controller is
@@ -35,12 +34,13 @@ additionalProperties: false
 
 examples:
   - |
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
         cros-ec@0 {
             compatible = "google,cros-ec-spi";
             reg = <0>;
+            interrupts = <44 0>;
 
             usbc_extcon0: extcon0 {
                 compatible = "google,extcon-usbc-cros-ec";
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml
index 9875b4d5c356..126107dd57b1 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml
@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: ti,tusb320
+    enum:
+      - ti,tusb320
+      - ti,tusb320l
 
   reg:
     maxItems: 1
@@ -28,7 +30,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
         tusb320@61 {
diff --git a/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
new file mode 100644
index 000000000000..128960545640
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/maxim,max77843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77843 MicroUSB and Companion Power Management IC Extcon
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77843 MicroUSB
+  Integrated Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77843.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77843-muic
+
+  connector:
+    $ref: /schemas/connector/usb-connector.yaml#
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Any connector to the data bus of this controller should be modelled using
+      the OF graph bindings specified
+    properties:
+      port:
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - connector
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
index fd2e55088888..7a224b2f0977 100644
--- a/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
+++ b/Documentation/devicetree/bindings/extcon/siliconmitus,sm5502-muic.yaml
@@ -20,11 +20,12 @@ properties:
     enum:
       - siliconmitus,sm5502-muic
       - siliconmitus,sm5504-muic
+      - siliconmitus,sm5703-muic
 
   reg:
     maxItems: 1
-    description: I2C slave address of the device. Usually 0x25 for SM5502,
-      0x14 for SM5504.
+    description: I2C slave address of the device. Usually 0x25 for SM5502
+      and SM5703, 0x14 for SM5504.
 
   interrupts:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml b/Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml
new file mode 100644
index 000000000000..8f50e698760e
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/amlogic,meson-gxbb-sm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Secure Monitor (SM)
+
+description:
+  In the Amlogic SoCs the Secure Monitor code is used to provide access to the
+  NVMEM, enable JTAG, set USB boot, etc...
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-gxbb-sm
+      - items:
+          - const: amlogic,meson-gx-sm
+          - const: amlogic,meson-gxbb-sm
+
+  power-controller:
+    type: object
+    $ref: /schemas/power/amlogic,meson-sec-pwrc.yaml#
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    firmware {
+        secure-monitor {
+            compatible = "amlogic,meson-gxbb-sm";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index 5c4c6782e052..5824c43e9893 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/firmware/arm,scmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: System Control and Management Interface (SCMI) Message Protocol bindings
+title: System Control and Management Interface (SCMI) Message Protocol
 
 maintainers:
   - Sudeep Holla <sudeep.holla@arm.com>
@@ -38,6 +38,9 @@ properties:
                      The virtio transport only supports a single device.
         items:
           - const: arm,scmi-virtio
+      - description: SCMI compliant firmware with OP-TEE transport
+        items:
+          - const: linaro,scmi-optee
 
   interrupts:
     description:
@@ -53,17 +56,38 @@ properties:
     description:
       Specifies the mailboxes used to communicate with SCMI compliant
       firmware.
-    items:
-      - const: tx
-      - const: rx
+    oneOf:
+      - items:
+          - const: tx
+          - const: rx
+        minItems: 1
+      - items:
+          - const: tx
+          - const: tx_reply
+          - const: rx
+        minItems: 2
 
   mboxes:
     description:
       List of phandle and mailbox channel specifiers. It should contain
-      exactly one or two mailboxes, one for transmitting messages("tx")
-      and another optional for receiving the notifications("rx") if supported.
+      exactly one, two or three mailboxes; the first one or two for transmitting
+      messages ("tx") and another optional ("rx") for receiving notifications
+      and delayed responses, if supported by the platform.
+      The number of mailboxes needed for transmitting messages depends on the
+      type of channels exposed by the specific underlying mailbox controller;
+      one single channel descriptor is enough if such channel is bidirectional,
+      while two channel descriptors are needed to represent the SCMI ("tx")
+      channel if the underlying mailbox channels are of unidirectional type.
+      The effective combination in numbers of mboxes and shmem descriptors let
+      the SCMI subsystem determine unambiguosly which type of SCMI channels are
+      made available by the underlying mailbox controller and how to use them.
+       1 mbox / 1 shmem => SCMI TX over 1 mailbox bidirectional channel
+       2 mbox / 2 shmem => SCMI TX and RX over 2 mailbox bidirectional channels
+       2 mbox / 1 shmem => SCMI TX over 2 mailbox unidirectional channels
+       3 mbox / 2 shmem => SCMI TX and RX over 3 mailbox unidirectional channels
+      Any other combination of mboxes and shmem is invalid.
     minItems: 1
-    maxItems: 2
+    maxItems: 3
 
   shmem:
     description:
@@ -78,13 +102,28 @@ properties:
   '#size-cells':
     const: 0
 
+  atomic-threshold-us:
+    description:
+      An optional time value, expressed in microseconds, representing, on this
+      platform, the threshold above which any SCMI command, advertised to have
+      an higher-than-threshold execution latency, should not be considered for
+      atomic mode of operation, even if requested.
+    default: 0
+
   arm,smc-id:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
       SMC id required when using smc or hvc transports
 
+  linaro,optee-channel-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Channel specifier required when using OP-TEE transport.
+
   protocol@11:
-    type: object
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
     properties:
       reg:
         const: 0x11
@@ -96,7 +135,9 @@ properties:
       - '#power-domain-cells'
 
   protocol@13:
-    type: object
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
     properties:
       reg:
         const: 0x13
@@ -108,7 +149,9 @@ properties:
       - '#clock-cells'
 
   protocol@14:
-    type: object
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
     properties:
       reg:
         const: 0x14
@@ -120,7 +163,9 @@ properties:
       - '#clock-cells'
 
   protocol@15:
-    type: object
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
     properties:
       reg:
         const: 0x15
@@ -132,7 +177,9 @@ properties:
       - '#thermal-sensor-cells'
 
   protocol@16:
-    type: object
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
     properties:
       reg:
         const: 0x16
@@ -144,20 +191,31 @@ properties:
       - '#reset-cells'
 
   protocol@17:
-    type: object
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
     properties:
       reg:
         const: 0x17
 
       regulators:
         type: object
+        additionalProperties: false
         description:
           The list of all regulators provided by this SCMI controller.
 
+        properties:
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
         patternProperties:
-          '^regulators@[0-9a-f]+$':
+          '^regulator@[0-9a-f]+$':
             type: object
             $ref: "../regulator/regulator.yaml#"
+            unevaluatedProperties: false
 
             properties:
               reg:
@@ -167,10 +225,18 @@ properties:
             required:
               - reg
 
+  protocol@18:
+    $ref: '#/$defs/protocol-node'
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x18
+
 additionalProperties: false
 
-patternProperties:
-  '^protocol@[0-9a-f]+$':
+$defs:
+  protocol-node:
     type: object
     description:
       Each sub-node represents a protocol supported. If the platform
@@ -183,18 +249,31 @@ patternProperties:
         maxItems: 1
 
       mbox-names:
-        items:
-          - const: tx
-          - const: rx
+        oneOf:
+          - items:
+              - const: tx
+              - const: rx
+            minItems: 1
+          - items:
+              - const: tx
+              - const: tx_reply
+              - const: rx
+            minItems: 2
 
       mboxes:
         minItems: 1
-        maxItems: 2
+        maxItems: 3
 
       shmem:
         minItems: 1
         maxItems: 2
 
+      linaro,optee-channel-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Channel specifier required when using OP-TEE transport and
+          protocol has a dedicated communication channel.
+
     required:
       - reg
 
@@ -226,6 +305,16 @@ else:
       - arm,smc-id
       - shmem
 
+  else:
+    if:
+      properties:
+        compatible:
+          contains:
+            const: linaro,scmi-optee
+    then:
+      required:
+        - linaro,optee-channel-id
+
 examples:
   - |
     firmware {
@@ -240,6 +329,8 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
+            atomic-threshold-us = <10000>;
+
             scmi_devpd: protocol@11 {
                 reg = <0x11>;
                 #power-domain-cells = <1>;
@@ -289,6 +380,10 @@ examples:
                     };
                 };
             };
+
+            scmi_powercap: protocol@18 {
+                reg = <0x18>;
+            };
         };
     };
 
@@ -330,7 +425,7 @@ examples:
     firmware {
         scmi {
             compatible = "arm,scmi-smc";
-            shmem = <&cpu_scp_lpri0 &cpu_scp_lpri1>;
+            shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>;
             arm,smc-id = <0xc3000001>;
 
             #address-cells = <1>;
@@ -340,7 +435,48 @@ examples:
                 reg = <0x11>;
                 #power-domain-cells = <1>;
             };
+        };
+    };
+
+  - |
+    firmware {
+        scmi {
+            compatible = "linaro,scmi-optee";
+            linaro,optee-channel-id = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            scmi_dvfs1: protocol@13 {
+                reg = <0x13>;
+                linaro,optee-channel-id = <1>;
+                shmem = <&cpu_optee_lpri0>;
+                #clock-cells = <1>;
+            };
 
+            scmi_clk0: protocol@14 {
+                reg = <0x14>;
+                #clock-cells = <1>;
+            };
+        };
+    };
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        sram@51000000 {
+            compatible = "mmio-sram";
+            reg = <0x0 0x51000000 0x0 0x10000>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0x0 0x51000000 0x10000>;
+
+            cpu_optee_lpri0: optee-sram-section@0 {
+                compatible = "arm,scmi-shmem";
+                reg = <0x0 0x80>;
+            };
         };
     };
 
diff --git a/Documentation/devicetree/bindings/firmware/arm,scpi.yaml b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml
index 23b346bd1252..241317239ffc 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scpi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scpi.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/firmware/arm,scpi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: System Control and Power Interface (SCPI) Message Protocol bindings
+title: System Control and Power Interface (SCPI) Message Protocol
 
 maintainers:
   - Sudeep Holla <sudeep.holla@arm.com>
@@ -43,6 +43,7 @@ properties:
       by remote SCP firmware for use by SCPI message protocol should be
       specified in any order.
     minItems: 1
+    maxItems: 4
 
   shmem:
     description:
@@ -51,6 +52,7 @@ properties:
       be any memory reserved for the purpose of this communication between the
       processors.
     minItems: 1
+    maxItems: 4
 
   power-controller:
     type: object
@@ -235,8 +237,8 @@ examples:
     firmware {
         scpi {
             compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
-            mboxes = <&mailbox 1 &mailbox 2>;
-            shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+            mboxes = <&mailbox 1>, <&mailbox 2>;
+            shmem = <&cpu_scp_lpri>, <&cpu_scp_hpri>;
 
             scpi_sensors1: sensors {
                 compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
diff --git a/Documentation/devicetree/bindings/firmware/fsl,scu.yaml b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
new file mode 100644
index 000000000000..557e524786c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/fsl,scu.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/fsl,scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX System Controller Firmware (SCFW)
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description:
+  The System Controller Firmware (SCFW) is a low-level system function
+  which runs on a dedicated Cortex-M core to provide power, clock, and
+  resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
+  (QM, QP), and i.MX8QX (QXP, DX).
+  The AP communicates with the SC using a multi-ported MU module found
+  in the LSIO subsystem. The current definition of this MU module provides
+  5 remote AP connections to the SC to support up to 5 execution environments
+  (TZ, HV, standard Linux, etc.). The SC side of this MU module interfaces
+  with the LSIO DSC IP bus. The SC firmware will communicate with this MU
+  using the MSI bus.
+
+properties:
+  compatible:
+    const: fsl,imx-scu
+
+  clock-controller:
+    description:
+      Clock controller node that provides the clocks controlled by the SCU
+    $ref: /schemas/clock/fsl,scu-clk.yaml
+
+  gpio:
+    description:
+      Control the GPIO PINs on SCU domain over the firmware APIs
+    $ref: /schemas/gpio/fsl,imx8qxp-sc-gpio.yaml
+
+  ocotp:
+    description:
+      OCOTP controller node provided by the SCU
+    $ref: /schemas/nvmem/fsl,scu-ocotp.yaml
+
+  keys:
+    description:
+      Keys provided by the SCU
+    $ref: /schemas/input/fsl,scu-key.yaml
+
+  mboxes:
+    description:
+      A list of phandles of TX MU channels followed by a list of phandles of
+      RX MU channels. The list may include at the end one more optional MU
+      channel for general interrupt. The number of expected tx and rx
+      channels is 1 TX and 1 RX channels if MU instance is "fsl,imx8-mu-scu"
+      compatible, 4 TX and 4 RX channels otherwise. All MU channels must be
+      within the same MU instance. Cross instances are not allowed. The MU
+      instance can only be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users
+      need to ensure that one is used that does not conflict with other
+      execution environments such as ATF.
+    oneOf:
+      - items:
+          - description: TX0 MU channel
+          - description: RX0 MU channel
+      - items:
+          - description: TX0 MU channel
+          - description: RX0 MU channel
+          - description: optional MU channel for general interrupt
+      - items:
+          - description: TX0 MU channel
+          - description: TX1 MU channel
+          - description: TX2 MU channel
+          - description: TX3 MU channel
+          - description: RX0 MU channel
+          - description: RX1 MU channel
+          - description: RX2 MU channel
+          - description: RX3 MU channel
+      - items:
+          - description: TX0 MU channel
+          - description: TX1 MU channel
+          - description: TX2 MU channel
+          - description: TX3 MU channel
+          - description: RX0 MU channel
+          - description: RX1 MU channel
+          - description: RX2 MU channel
+          - description: RX3 MU channel
+          - description: optional MU channel for general interrupt
+
+  mbox-names:
+    oneOf:
+      - items:
+          - const: tx0
+          - const: rx0
+      - items:
+          - const: tx0
+          - const: rx0
+          - const: gip3
+      - items:
+          - const: tx0
+          - const: tx1
+          - const: tx2
+          - const: tx3
+          - const: rx0
+          - const: rx1
+          - const: rx2
+          - const: rx3
+      - items:
+          - const: tx0
+          - const: tx1
+          - const: tx2
+          - const: tx3
+          - const: rx0
+          - const: rx1
+          - const: rx2
+          - const: rx3
+          - const: gip3
+
+  pinctrl:
+    description:
+      Pin controller provided by the SCU
+    $ref: /schemas/pinctrl/fsl,scu-pinctrl.yaml
+
+  power-controller:
+    description:
+      Power domains controller node that provides the power domains
+      controlled by the SCU
+    $ref: /schemas/power/fsl,scu-pd.yaml
+
+  rtc:
+    description:
+      RTC controller provided by the SCU
+    $ref: /schemas/rtc/fsl,scu-rtc.yaml
+
+  thermal-sensor:
+    description:
+      Thermal sensor provided by the SCU
+    $ref: /schemas/thermal/fsl,scu-thermal.yaml
+
+  watchdog:
+    description:
+      Watchdog controller provided by the SCU
+    $ref: /schemas/watchdog/fsl,scu-wdt.yaml
+
+required:
+  - compatible
+  - mbox-names
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/pinctrl/pads-imx8qxp.h>
+
+    firmware {
+        system-controller {
+            compatible = "fsl,imx-scu";
+            mbox-names = "tx0", "tx1", "tx2", "tx3",
+                         "rx0", "rx1", "rx2", "rx3",
+                         "gip3";
+            mboxes = <&lsio_mu1 0 0 &lsio_mu1 0 1 &lsio_mu1 0 2 &lsio_mu1 0 3
+                      &lsio_mu1 1 0 &lsio_mu1 1 1 &lsio_mu1 1 2 &lsio_mu1 1 3
+                      &lsio_mu1 3 3>;
+
+            clock-controller {
+                compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+                #clock-cells = <2>;
+            };
+
+            pinctrl {
+                compatible = "fsl,imx8qxp-iomuxc";
+
+                pinctrl_lpuart0: lpuart0grp {
+                    fsl,pins = <
+                        IMX8QXP_UART0_RX_ADMA_UART0_RX   0x06000020
+                        IMX8QXP_UART0_TX_ADMA_UART0_TX   0x06000020
+                    >;
+                };
+            };
+
+            ocotp {
+                compatible = "fsl,imx8qxp-scu-ocotp";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                fec_mac0: mac@2c4 {
+                    reg = <0x2c4 6>;
+                };
+            };
+
+            power-controller {
+                compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
+                #power-domain-cells = <1>;
+            };
+
+            rtc {
+                compatible = "fsl,imx8qxp-sc-rtc";
+            };
+
+            keys {
+                compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+                linux,keycodes = <KEY_POWER>;
+            };
+
+            watchdog {
+                compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+                timeout-sec = <60>;
+            };
+
+            thermal-sensor {
+                compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+                #thermal-sensor-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
index c435c9f369a4..9a785bbaafb7 100644
--- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
+++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
@@ -37,6 +37,20 @@ properties:
       should be named with the instance number of the NPE engine used for
       the crypto engine.
 
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  hss@[0-9]+$:
+    $ref: /schemas/net/intel,ixp4xx-hss.yaml#
+    type: object
+    description: Optional node for the High Speed Serial link (HSS), the
+      node should be named with the instance number of the NPE engine
+      used for the HSS.
+
 required:
   - compatible
   - reg
@@ -45,9 +59,30 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+
     npe: npe@c8006000 {
          compatible = "intel,ixp4xx-network-processing-engine";
          reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+         #address-cells = <1>;
+         #size-cells = <0>;
+
+         hss@0 {
+             compatible = "intel,ixp4xx-hss";
+             reg = <0>;
+             intel,npe-handle = <&npe 0>;
+             intel,queue-chl-rxtrig = <&qmgr 12>;
+             intel,queue-chl-txready = <&qmgr 34>;
+             intel,queue-pkt-rx = <&qmgr 13>;
+             intel,queue-pkt-tx = <&qmgr 14>, <&qmgr 15>, <&qmgr 16>, <&qmgr 17>;
+             intel,queue-pkt-rxfree = <&qmgr 18>, <&qmgr 19>, <&qmgr 20>, <&qmgr 21>;
+             intel,queue-pkt-txdone = <&qmgr 22>;
+             cts-gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+             rts-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+             dcd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+             dtr-gpios = <&gpio_74 2 GPIO_ACTIVE_LOW>;
+             clk-internal-gpios = <&gpio_74 0 GPIO_ACTIVE_HIGH>;
+         };
 
          crypto {
              compatible = "intel,ixp4xx-crypto";
diff --git a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
deleted file mode 100644
index c248cd44f727..000000000000
--- a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-* Amlogic Secure Monitor
-
-In the Amlogic SoCs the Secure Monitor code is used to provide access to the
-NVMEM, enable JTAG, set USB boot, etc...
-
-Required properties for the secure monitor node:
-- compatible: Should be "amlogic,meson-gxbb-sm"
-
-Example:
-
-	firmware {
-		sm: secure-monitor {
-			compatible = "amlogic,meson-gxbb-sm";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
deleted file mode 100644
index e44a13bc06ed..000000000000
--- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt
+++ /dev/null
@@ -1,107 +0,0 @@
-NVIDIA Tegra Boot and Power Management Processor (BPMP)
-
-The BPMP is a specific processor in Tegra chip, which is designed for
-booting process handling and offloading the power management, clock
-management, and reset control tasks from the CPU. The binding document
-defines the resources that would be used by the BPMP firmware driver,
-which can create the interprocessor communication (IPC) between the CPU
-and BPMP.
-
-Required properties:
-- compatible
-    Array of strings
-    One of:
-    - "nvidia,tegra186-bpmp"
-- mboxes : The phandle of mailbox controller and the mailbox specifier.
-- shmem : List of the phandle of the TX and RX shared memory area that
-	  the IPC between CPU and BPMP is based on.
-- #clock-cells : Should be 1.
-- #power-domain-cells : Should be 1.
-- #reset-cells : Should be 1.
-
-This node is a mailbox consumer. See the following files for details of
-the mailbox subsystem, and the specifiers implemented by the relevant
-provider(s):
-
-- .../mailbox/mailbox.txt
-- .../mailbox/nvidia,tegra186-hsp.txt
-
-This node is a clock, power domain, and reset provider. See the following
-files for general documentation of those features, and the specifiers
-implemented by this node:
-
-- .../clock/clock-bindings.txt
-- <dt-bindings/clock/tegra186-clock.h>
-- ../power/power-domain.yaml
-- <dt-bindings/power/tegra186-powergate.h>
-- .../reset/reset.txt
-- <dt-bindings/reset/tegra186-reset.h>
-
-The BPMP implements some services which must be represented by separate nodes.
-For example, it can provide access to certain I2C controllers, and the I2C
-bindings represent each I2C controller as a device tree node. Such nodes should
-be nested directly inside the main BPMP node.
-
-Software can determine whether a child node of the BPMP node represents a device
-by checking for a compatible property. Any node with a compatible property
-represents a device that can be instantiated. Nodes without a compatible
-property may be used to provide configuration information regarding the BPMP
-itself, although no such configuration nodes are currently defined by this
-binding.
-
-The BPMP firmware defines no single global name-/numbering-space for such
-services. Put another way, the numbering scheme for I2C buses is distinct from
-the numbering scheme for any other service the BPMP may provide (e.g. a future
-hypothetical SPI bus service). As such, child device nodes will have no reg
-property, and the BPMP node will have no #address-cells or #size-cells property.
-
-The shared memory bindings for BPMP
------------------------------------
-
-The shared memory area for the IPC TX and RX between CPU and BPMP are
-predefined and work on top of sysram, which is an SRAM inside the chip.
-
-See ".../sram/sram.txt" for the bindings.
-
-Example:
-
-hsp_top0: hsp@3c00000 {
-	...
-	#mbox-cells = <2>;
-};
-
-sysram@30000000 {
-	compatible = "nvidia,tegra186-sysram", "mmio-sram";
-	reg = <0x0 0x30000000 0x0 0x50000>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>;
-
-	cpu_bpmp_tx: shmem@4e000 {
-		compatible = "nvidia,tegra186-bpmp-shmem";
-		reg = <0x0 0x4e000 0x0 0x1000>;
-		label = "cpu-bpmp-tx";
-		pool;
-	};
-
-	cpu_bpmp_rx: shmem@4f000 {
-		compatible = "nvidia,tegra186-bpmp-shmem";
-		reg = <0x0 0x4f000 0x0 0x1000>;
-		label = "cpu-bpmp-rx";
-		pool;
-	};
-};
-
-bpmp {
-	compatible = "nvidia,tegra186-bpmp";
-	mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>;
-	shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
-	#clock-cells = <1>;
-	#power-domain-cells = <1>;
-	#reset-cells = <1>;
-
-	i2c {
-		compatible = "...";
-		...
-	};
-};
diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
new file mode 100644
index 000000000000..833c07f1685c
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/nvidia,tegra186-bpmp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Boot and Power Management Processor (BPMP)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The BPMP is a specific processor in Tegra chip, which is designed for
+  booting process handling and offloading the power management, clock
+  management, and reset control tasks from the CPU. The binding document
+  defines the resources that would be used by the BPMP firmware driver,
+  which can create the interprocessor communication (IPC) between the
+  CPU and BPMP.
+
+  This node is a mailbox consumer. See the following files for details
+  of the mailbox subsystem, and the specifiers implemented by the
+  relevant provider(s):
+
+    - .../mailbox/mailbox.txt
+    - .../mailbox/nvidia,tegra186-hsp.yaml
+
+  This node is a clock, power domain, and reset provider. See the
+  following files for general documentation of those features, and the
+  specifiers implemented by this node:
+
+    - .../clock/clock-bindings.txt
+    - <dt-bindings/clock/tegra186-clock.h>
+    - ../power/power-domain.yaml
+    - <dt-bindings/power/tegra186-powergate.h>
+    - .../reset/reset.txt
+    - <dt-bindings/reset/tegra186-reset.h>
+
+  The BPMP implements some services which must be represented by
+  separate nodes. For example, it can provide access to certain I2C
+  controllers, and the I2C bindings represent each I2C controller as a
+  device tree node. Such nodes should be nested directly inside the main
+  BPMP node.
+
+  Software can determine whether a child node of the BPMP node
+  represents a device by checking for a compatible property. Any node
+  with a compatible property represents a device that can be
+  instantiated. Nodes without a compatible property may be used to
+  provide configuration information regarding the BPMP itself, although
+  no such configuration nodes are currently defined by this binding.
+
+  The BPMP firmware defines no single global name-/numbering-space for
+  such services. Put another way, the numbering scheme for I2C buses is
+  distinct from the numbering scheme for any other service the BPMP may
+  provide (e.g. a future hypothetical SPI bus service). As such, child
+  device nodes will have no reg property, and the BPMP node will have no
+  "#address-cells" or "#size-cells" property.
+
+  The shared memory area for the IPC TX and RX between CPU and BPMP are
+  predefined and work on top of sysram, which is an SRAM inside the
+  chip. See ".../sram/sram.yaml" for the bindings.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra194-bpmp
+              - nvidia,tegra234-bpmp
+          - const: nvidia,tegra186-bpmp
+      - const: nvidia,tegra186-bpmp
+
+  mboxes:
+    description: A phandle and channel specifier for the mailbox used to
+      communicate with the BPMP.
+    maxItems: 1
+
+  shmem:
+    description: List of the phandle to the TX and RX shared memory area
+      that the IPC between CPU and BPMP is based on.
+    minItems: 2
+    maxItems: 2
+
+  "#clock-cells":
+    const: 1
+
+  "#power-domain-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+      - description: DMA read client
+      - description: DMA write client
+
+  interconnect-names:
+    items:
+      - const: read
+      - const: write
+      - const: dma-mem # dma-read
+      - const: dma-write
+
+  iommus:
+    maxItems: 1
+
+  i2c:
+    type: object
+
+  thermal:
+    type: object
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mboxes
+  - shmem
+  - "#clock-cells"
+  - "#power-domain-cells"
+  - "#reset-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+
+    hsp_top0: hsp@3c00000 {
+        compatible = "nvidia,tegra186-hsp";
+        reg = <0x03c00000 0xa0000>;
+        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "doorbell";
+        #mbox-cells = <2>;
+    };
+
+    sram@30000000 {
+        compatible = "nvidia,tegra186-sysram", "mmio-sram";
+        reg = <0x30000000 0x50000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x30000000 0x50000>;
+
+        cpu_bpmp_tx: sram@4e000 {
+            reg = <0x4e000 0x1000>;
+            label = "cpu-bpmp-tx";
+            pool;
+        };
+
+        cpu_bpmp_rx: sram@4f000 {
+            reg = <0x4f000 0x1000>;
+            label = "cpu-bpmp-rx";
+            pool;
+        };
+    };
+
+    bpmp {
+        compatible = "nvidia,tegra186-bpmp";
+        interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>,
+                        <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>;
+        interconnect-names = "read", "write", "dma-mem", "dma-write";
+        iommus = <&smmu TEGRA186_SID_BPMP>;
+        mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
+                            TEGRA_HSP_DB_MASTER_BPMP>;
+        shmem = <&cpu_bpmp_tx>, <&cpu_bpmp_rx>;
+        #clock-cells = <1>;
+        #power-domain-cells = <1>;
+        #reset-cells = <1>;
+
+        i2c {
+            compatible = "nvidia,tegra186-bpmp-i2c";
+            nvidia,bpmp-bus-id = <5>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        thermal {
+            compatible = "nvidia,tegra186-bpmp-thermal";
+            #thermal-sensor-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
deleted file mode 100644
index a7333ad938d2..000000000000
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-QCOM Secure Channel Manager (SCM)
-
-Qualcomm processors include an interface to communicate to the secure firmware.
-This interface allows for clients to request different types of actions.  These
-can include CPU power up/down, HDCP requests, loading of firmware, and other
-assorted actions.
-
-Required properties:
-- compatible: must contain one of the following:
- * "qcom,scm-apq8064"
- * "qcom,scm-apq8084"
- * "qcom,scm-ipq4019"
- * "qcom,scm-ipq806x"
- * "qcom,scm-ipq8074"
- * "qcom,scm-mdm9607"
- * "qcom,scm-msm8660"
- * "qcom,scm-msm8916"
- * "qcom,scm-msm8960"
- * "qcom,scm-msm8974"
- * "qcom,scm-msm8994"
- * "qcom,scm-msm8996"
- * "qcom,scm-msm8998"
- * "qcom,scm-sc7180"
- * "qcom,scm-sc7280"
- * "qcom,scm-sdm845"
- * "qcom,scm-sdx55"
- * "qcom,scm-sm8150"
- * "qcom,scm-sm8250"
- * "qcom,scm-sm8350"
- and:
- * "qcom,scm"
-- clocks: Specifies clocks needed by the SCM interface, if any:
- * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
-   "qcom,scm-msm8960"
- * core, iface and bus clocks required for "qcom,scm-apq8084",
-   "qcom,scm-msm8916" and "qcom,scm-msm8974"
-- clock-names: Must contain "core" for the core clock, "iface" for the interface
-  clock and "bus" for the bus clock per the requirements of the compatible.
-- qcom,dload-mode: phandle to the TCSR hardware block and offset of the
-		   download mode control register (optional)
-
-Example for MSM8916:
-
-	firmware {
-		scm {
-			compatible = "qcom,msm8916", "qcom,scm";
-			clocks = <&gcc GCC_CRYPTO_CLK> ,
-				 <&gcc GCC_CRYPTO_AXI_CLK>,
-				 <&gcc GCC_CRYPTO_AHB_CLK>;
-			clock-names = "core", "bus", "iface";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
new file mode 100644
index 000000000000..367d04ad1923
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/qcom,scm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QCOM Secure Channel Manager (SCM)
+
+description: |
+  Qualcomm processors include an interface to communicate to the secure firmware.
+  This interface allows for clients to request different types of actions.
+  These can include CPU power up/down, HDCP requests, loading of firmware,
+  and other assorted actions.
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Robert Marko <robimarko@gmail.com>
+  - Guru Das Srinagesh <quic_gurus@quicinc.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,scm-apq8064
+          - qcom,scm-apq8084
+          - qcom,scm-ipq4019
+          - qcom,scm-ipq5332
+          - qcom,scm-ipq6018
+          - qcom,scm-ipq806x
+          - qcom,scm-ipq8074
+          - qcom,scm-ipq9574
+          - qcom,scm-mdm9607
+          - qcom,scm-msm8226
+          - qcom,scm-msm8660
+          - qcom,scm-msm8916
+          - qcom,scm-msm8953
+          - qcom,scm-msm8960
+          - qcom,scm-msm8974
+          - qcom,scm-msm8976
+          - qcom,scm-msm8994
+          - qcom,scm-msm8996
+          - qcom,scm-msm8998
+          - qcom,scm-qcm2290
+          - qcom,scm-qdu1000
+          - qcom,scm-sa8775p
+          - qcom,scm-sc7180
+          - qcom,scm-sc7280
+          - qcom,scm-sc8180x
+          - qcom,scm-sc8280xp
+          - qcom,scm-sdm670
+          - qcom,scm-sdm845
+          - qcom,scm-sdx55
+          - qcom,scm-sdx65
+          - qcom,scm-sm6115
+          - qcom,scm-sm6125
+          - qcom,scm-sm6350
+          - qcom,scm-sm6375
+          - qcom,scm-sm8150
+          - qcom,scm-sm8250
+          - qcom,scm-sm8350
+          - qcom,scm-sm8450
+          - qcom,scm-sm8550
+          - qcom,scm-qcs404
+      - const: qcom,scm
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    maxItems: 1
+
+  '#reset-cells':
+    const: 1
+
+  interrupts:
+    description:
+      The wait-queue interrupt that firmware raises as part of handshake
+      protocol to handle sleeping SCM calls.
+    maxItems: 1
+
+  qcom,dload-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to TCSR hardware block
+          - description: offset of the download mode control register
+    description: TCSR hardware block
+
+allOf:
+  # Clocks
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8064
+              - qcom,scm-apq8084
+              - qcom,scm-mdm9607
+              - qcom,scm-msm8226
+              - qcom,scm-msm8660
+              - qcom,scm-msm8916
+              - qcom,scm-msm8953
+              - qcom,scm-msm8960
+              - qcom,scm-msm8974
+              - qcom,scm-msm8976
+              - qcom,scm-qcm2290
+              - qcom,scm-sm6375
+    then:
+      required:
+        - clocks
+        - clock-names
+    else:
+      properties:
+        clock-names: false
+        clocks: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8064
+              - qcom,scm-msm8660
+              - qcom,scm-msm8960
+              - qcom,scm-qcm2290
+              - qcom,scm-sm6375
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: core
+
+        clocks:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,scm-apq8084
+              - qcom,scm-mdm9607
+              - qcom,scm-msm8226
+              - qcom,scm-msm8916
+              - qcom,scm-msm8953
+              - qcom,scm-msm8974
+              - qcom,scm-msm8976
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: core
+            - const: bus
+            - const: iface
+
+        clocks:
+          minItems: 3
+          maxItems: 3
+
+  # Interconnects
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,scm-qdu1000
+                - qcom,scm-sm8450
+                - qcom,scm-sm8550
+    then:
+      properties:
+        interconnects: false
+
+  # Interrupts
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,scm-sm8450
+                - qcom,scm-sm8550
+    then:
+      properties:
+        interrupts: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+
+    firmware {
+        scm {
+            compatible = "qcom,scm-msm8916", "qcom,scm";
+            clocks = <&gcc GCC_CRYPTO_CLK>,
+                     <&gcc GCC_CRYPTO_AXI_CLK>,
+                     <&gcc GCC_CRYPTO_AHB_CLK>;
+            clock-names = "core", "bus", "iface";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
new file mode 100644
index 000000000000..3faae3236665
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/firmware/qemu,fw-cfg-mmio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QEMU Firmware Configuration
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |
+  Various QEMU emulation / virtualization targets provide the following
+  Firmware Configuration interface on the "virt" machine type:
+
+  - A write-only, 16-bit wide selector (or control) register,
+  - a read-write, 64-bit wide data register.
+
+  QEMU exposes the control and data register to guests as memory mapped
+  registers; their location is communicated to the guest's UEFI firmware in the
+  DTB that QEMU places at the bottom of the guest's DRAM.
+
+  The authoritative guest-side hardware interface documentation to the fw_cfg
+  device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree.
+
+
+properties:
+  compatible:
+    const: qemu,fw-cfg-mmio
+
+  reg:
+    maxItems: 1
+    description: |
+      * Bytes 0x0 to 0x7 cover the data register.
+      * Bytes 0x8 to 0x9 cover the selector register.
+      * Further registers may be appended to the region in case of future interface
+        revisions / feature bits.
+
+  dma-coherent: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    fw-cfg@9020000 {
+        compatible = "qemu,fw-cfg-mmio";
+        reg = <0x9020000 0xa>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.txt b/Documentation/devicetree/bindings/fpga/fpga-region.txt
index 7d3515264838..6694ef29a267 100644
--- a/Documentation/devicetree/bindings/fpga/fpga-region.txt
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.txt
@@ -330,7 +330,7 @@ succeeded.
 
 The Device Tree Overlay will contain:
  * "target-path" or "target"
-   The insertion point where the the contents of the overlay will go into the
+   The insertion point where the contents of the overlay will go into the
    live tree.  target-path is a full path, while target is a phandle.
  * "ranges"
     The address space mapping from processor to FPGA bus(ses).
diff --git a/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml
new file mode 100644
index 000000000000..4fb05eb84e2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/lattice,sysconfig.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/lattice,sysconfig.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lattice Slave SPI sysCONFIG FPGA manager
+
+maintainers:
+  - Ivan Bornyakov <i.bornyakov@metrotek.ru>
+
+description: |
+  Lattice sysCONFIG port, which is used for FPGA configuration, among others,
+  have Slave Serial Peripheral Interface. Only full reconfiguration is
+  supported.
+
+  Programming of ECP5 is done by writing uncompressed bitstream image in .bit
+  format into FPGA's SRAM configuration memory.
+
+properties:
+  compatible:
+    enum:
+      - lattice,sysconfig-ecp5
+
+  reg:
+    maxItems: 1
+
+  program-gpios:
+    description:
+      A GPIO line connected to PROGRAMN (active low) pin of the device.
+      Initiates configuration sequence.
+    maxItems: 1
+
+  init-gpios:
+    description:
+      A GPIO line connected to INITN (active low) pin of the device.
+      Indicates that the FPGA is ready to be configured.
+    maxItems: 1
+
+  done-gpios:
+    description:
+      A GPIO line connected to DONE (active high) pin of the device.
+      Indicates that the configuration sequence is complete.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: lattice,sysconfig-ecp5
+    then:
+      properties:
+        spi-max-frequency:
+          maximum: 60000000
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fpga-mgr@0 {
+            compatible = "lattice,sysconfig-ecp5";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            program-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+            init-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
+            done-gpios = <&gpio3 2 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
new file mode 100644
index 000000000000..527532f039ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/microchip,mpf-spi-fpga-mgr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Polarfire FPGA manager.
+
+maintainers:
+  - Ivan Bornyakov <i.bornyakov@metrotek.ru>
+
+description:
+  Device Tree Bindings for Microchip Polarfire FPGA Manager using slave SPI to
+  load the bitstream in .dat format.
+
+properties:
+  compatible:
+    enum:
+      - microchip,mpf-spi-fpga-mgr
+
+  reg:
+    description: SPI chip select
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            fpga_mgr@0 {
+                    compatible = "microchip,mpf-spi-fpga-mgr";
+                    spi-max-frequency = <20000000>;
+                    reg = <0>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt b/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
deleted file mode 100644
index 0acdfa6d62a4..000000000000
--- a/Documentation/devicetree/bindings/fpga/xilinx-pr-decoupler.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-Xilinx LogiCORE Partial Reconfig Decoupler Softcore
-
-The Xilinx LogiCORE Partial Reconfig Decoupler manages one or more
-decouplers / fpga bridges.
-The controller can decouple/disable the bridges which prevents signal
-changes from passing through the bridge.  The controller can also
-couple / enable the bridges which allows traffic to pass through the
-bridge normally.
-
-Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager
-Softcore is compatible with the Xilinx LogiCORE pr-decoupler.
-
-The Dynamic Function eXchange AXI shutdown manager prevents AXI traffic
-from passing through the bridge. The controller safely handles AXI4MM
-and AXI4-Lite interfaces on a Reconfigurable Partition when it is
-undergoing dynamic reconfiguration, preventing the system deadlock
-that can occur if AXI transactions are interrupted by DFX
-
-The Driver supports only MMIO handling. A PR region can have multiple
-PR Decouplers which can be handled independently or chained via decouple/
-decouple_status signals.
-
-Required properties:
-- compatible		: Should contain "xlnx,pr-decoupler-1.00" followed by
-                          "xlnx,pr-decoupler" or
-                          "xlnx,dfx-axi-shutdown-manager-1.00" followed by
-                          "xlnx,dfx-axi-shutdown-manager"
-- regs			: base address and size for decoupler module
-- clocks		: input clock to IP
-- clock-names		: should contain "aclk"
-
-See Documentation/devicetree/bindings/fpga/fpga-region.txt and
-Documentation/devicetree/bindings/fpga/fpga-bridge.txt for generic bindings.
-
-Example:
-Partial Reconfig Decoupler:
-	fpga-bridge@100000450 {
-		compatible = "xlnx,pr-decoupler-1.00",
-			     "xlnx-pr-decoupler";
-		regs = <0x10000045 0x10>;
-		clocks = <&clkc 15>;
-		clock-names = "aclk";
-		bridge-enable = <0>;
-	};
-
-Dynamic Function eXchange AXI shutdown manager:
-	fpga-bridge@100000450 {
-		compatible = "xlnx,dfx-axi-shutdown-manager-1.00",
-			     "xlnx,dfx-axi-shutdown-manager";
-		regs = <0x10000045 0x10>;
-		clocks = <&clkc 15>;
-		clock-names = "aclk";
-		bridge-enable = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
deleted file mode 100644
index 5ef659c1394d..000000000000
--- a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Xilinx Slave Serial SPI FPGA Manager
-
-Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the
-bitstream over what is referred to as "slave serial" interface.
-The slave serial link is not technically SPI, and might require extra
-circuits in order to play nicely with other SPI slaves on the same bus.
-
-See:
-- https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
-- https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
-- https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
-
-Required properties:
-- compatible: should contain "xlnx,fpga-slave-serial"
-- reg: spi chip select of the FPGA
-- prog_b-gpios: config pin (referred to as PROGRAM_B in the manual)
-- done-gpios: config status pin (referred to as DONE in the manual)
-
-Optional properties:
-- init-b-gpios: initialization status and configuration error pin
-                (referred to as INIT_B in the manual)
-
-Example for full FPGA configuration:
-
-	fpga-region0 {
-		compatible = "fpga-region";
-		fpga-mgr = <&fpga_mgr_spi>;
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-	};
-
-	spi1: spi@10680 {
-		compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
-		pinctrl-0 = <&spi0_pins>;
-		pinctrl-names = "default";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cell-index = <1>;
-		interrupts = <92>;
-		clocks = <&coreclk 0>;
-
-		fpga_mgr_spi: fpga-mgr@0 {
-			compatible = "xlnx,fpga-slave-serial";
-			spi-max-frequency = <60000000>;
-			spi-cpha;
-			reg = <0>;
-			prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
-			init-b-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
-			done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
index 29daca4be47f..f47b6140a742 100644
--- a/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
+++ b/Documentation/devicetree/bindings/fpga/xilinx-zynq-fpga-mgr.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/fpga/xilinx-zynq-fpga-mgr.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx Zynq FPGA Manager Device Tree Bindings
+title: Xilinx Zynq FPGA Manager
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml b/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml
new file mode 100644
index 000000000000..614d86ad825f
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,fpga-slave-serial.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,fpga-slave-serial.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Slave Serial SPI FPGA
+
+maintainers:
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
+
+description: |
+  Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the bitstream
+  over what is referred to as slave serial interface.The slave serial link is
+  not technically SPI, and might require extra circuits in order to play nicely
+  with other SPI slaves on the same bus.
+
+  Datasheets:
+    https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
+    https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
+    https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,fpga-slave-serial
+
+  spi-cpha: true
+
+  spi-max-frequency:
+    maximum: 60000000
+
+  reg:
+    maxItems: 1
+
+  prog_b-gpios:
+    description:
+      config pin (referred to as PROGRAM_B in the manual)
+    maxItems: 1
+
+  done-gpios:
+    description:
+      config status pin (referred to as DONE in the manual)
+    maxItems: 1
+
+  init-b-gpios:
+    description:
+      initialization status and configuration error pin
+      (referred to as INIT_B in the manual)
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - prog_b-gpios
+  - done-gpios
+  - init-b-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      fpga_mgr_spi: fpga-mgr@0 {
+        compatible = "xlnx,fpga-slave-serial";
+        spi-max-frequency = <60000000>;
+        spi-cpha;
+        reg = <0>;
+        prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+        init-b-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+        done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
new file mode 100644
index 000000000000..a7d4b8e59e19
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,pr-decoupler.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fpga/xlnx,pr-decoupler.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx LogiCORE Partial Reconfig Decoupler/AXI shutdown manager Softcore
+
+maintainers:
+  - Nava kishore Manne <nava.kishore.manne@amd.com>
+
+description: |
+  The Xilinx LogiCORE Partial Reconfig(PR) Decoupler manages one or more
+  decouplers/fpga bridges. The controller can decouple/disable the bridges
+  which prevents signal changes from passing through the bridge. The controller
+  can also couple / enable the bridges which allows traffic to pass through the
+  bridge normally.
+  Xilinx LogiCORE Dynamic Function eXchange(DFX) AXI shutdown manager Softcore
+  is compatible with the Xilinx LogiCORE pr-decoupler. The Dynamic Function
+  eXchange AXI shutdown manager prevents AXI traffic from passing through the
+  bridge. The controller safely handles AXI4MM and AXI4-Lite interfaces on a
+  Reconfigurable Partition when it is undergoing dynamic reconfiguration,
+  preventing the system deadlock that can occur if AXI transactions are
+  interrupted by DFX.
+  Please refer to fpga-region.txt and fpga-bridge.txt in this directory for
+  common binding part and usage.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: xlnx,pr-decoupler-1.00
+          - const: xlnx,pr-decoupler
+      - items:
+          - const: xlnx,dfx-axi-shutdown-manager-1.00
+          - const: xlnx,dfx-axi-shutdown-manager
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: aclk
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    fpga-bridge@100000450 {
+      compatible = "xlnx,pr-decoupler-1.00", "xlnx,pr-decoupler";
+      reg = <0x10000045 0x10>;
+      clocks = <&clkc 15>;
+      clock-names = "aclk";
+    };
+...
diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
index 6cd2bdc06b5f..00a8d92ff736 100644
--- a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/fpga/xlnx,zynqmp-pcap-fpga.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx Zynq Ultrascale MPSoC FPGA Manager Device Tree Bindings
+title: Xilinx Zynq Ultrascale MPSoC FPGA Manager
 
 maintainers:
   - Nava kishore Manne <navam@xilinx.com>
diff --git a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
deleted file mode 100644
index b109911669e4..000000000000
--- a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block.
-
-Required properties:
-- compatible : For Tegra20, must contain "nvidia,tegra20-efuse".  For Tegra30,
-  must contain "nvidia,tegra30-efuse".  For Tegra114, must contain
-  "nvidia,tegra114-efuse".  For Tegra124, must contain "nvidia,tegra124-efuse".
-  For Tegra132 must contain "nvidia,tegra132-efuse", "nvidia,tegra124-efuse".
-  For Tegra210 must contain "nvidia,tegra210-efuse". For Tegra186 must contain
-  "nvidia,tegra186-efuse". For Tegra194 must contain "nvidia,tegra194-efuse".
-  For Tegra234 must contain "nvidia,tegra234-efuse".
-  Details:
-  nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data
-	due to a hardware bug. Tegra20 also lacks certain information which is
-	available in later generations such as fab code, lot code, wafer id,..
-  nvidia,tegra30-efuse, nvidia,tegra114-efuse and nvidia,tegra124-efuse:
-	The differences between these SoCs are the size of the efuse array,
-	the location of the spare (OEM programmable) bits and the location of
-	the speedo data.
-- reg: Should contain 1 entry: the entry gives the physical address and length
-       of the fuse registers.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - fuse
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
- - fuse
-
-Example:
-
-	fuse@7000f800 {
-		compatible = "nvidia,tegra20-efuse";
-		reg = <0x7000f800 0x400>,
-		      <0x70000000 0x400>;
-		clocks = <&tegra_car TEGRA20_CLK_FUSE>;
-		clock-names = "fuse";
-		resets = <&tegra_car 39>;
-		reset-names = "fuse";
-	};
-
-
diff --git a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.yaml b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.yaml
new file mode 100644
index 000000000000..02f0b0462377
--- /dev/null
+++ b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/fuse/nvidia,tegra20-fuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra FUSE block
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-efuse
+          - nvidia,tegra30-efuse
+          - nvidia,tegra114-efuse
+          - nvidia,tegra124-efuse
+          - nvidia,tegra210-efuse
+          - nvidia,tegra186-efuse
+          - nvidia,tegra194-efuse
+          - nvidia,tegra234-efuse
+
+      - items:
+          - const: nvidia,tegra132-efuse
+          - const: nvidia,tegra124-efuse
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fuse
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: fuse
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - nvidia,tegra20-efuse
+          - nvidia,tegra30-efuse
+          - nvidia,tegra114-efuse
+          - nvidia,tegra124-efuse
+          - nvidia,tegra132-efuse
+          - nvidia,tegra210-efuse
+then:
+  required:
+    - resets
+    - reset-names
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra20-car.h>
+
+    fuse@7000f800 {
+        compatible = "nvidia,tegra20-efuse";
+        reg = <0x7000f800 0x400>;
+        clocks = <&tegra_car TEGRA20_CLK_FUSE>;
+        clock-names = "fuse";
+        resets = <&tegra_car 39>;
+        reset-names = "fuse";
+    };
diff --git a/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
new file mode 100644
index 000000000000..c21549e0fba6
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/brcm,bcm4751.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4751 family GNSS Receiver
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Broadcom GPS chips can be used over the UART or I2C bus. The UART
+  bus requires CTS/RTS support. The number of the capsule is more
+  elaborate than the compatibles BCM4751 may be printed
+  BCM4751IFBG for example.
+
+allOf:
+  - $ref: gnss-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm4751
+      - brcm,bcm4752
+      - brcm,bcm4753
+
+  reg:
+    description:
+      The I2C Address, not required on UART buses.
+
+  vdd-auxin-supply:
+    description:
+      Main voltage supply, pin name VDD_AUXIN, typically connected
+      directly to a battery such as LiIon 3.8V battery or a 2.6V supply.
+
+  vddio-supply:
+    description:
+      IO voltage supply, pin name VDDIO, typically 1.8V
+
+  reset-gpios:
+    maxItems: 1
+    description: An optional active low reset line, should be flagged with
+      GPIO_ACTIVE_LOW.
+
+  enable-gpios:
+    description: Enable GPIO line, connected to pins named REGPU or NSTANDBY.
+      If the line is active low such as NSTANDBY, it should be tagged
+      GPIO_ACTIVE_LOW.
+
+required:
+  - compatible
+  - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+        gnss {
+            compatible = "brcm,bcm4751";
+            vdd-auxin-supply = <&vbat>;
+            reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+            enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+            current-speed = <38400>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/gnss-common.yaml b/Documentation/devicetree/bindings/gnss/gnss-common.yaml
new file mode 100644
index 000000000000..963b926e30a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/gnss-common.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/gnss-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Global Navigation Satellite Systems (GNSS)
+  receiver devices
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description: |
+  This document defines device tree properties common to Global Navigation
+  Satellite System receivers.
+
+properties:
+  $nodename:
+    pattern: "^gnss(@.*)?$"
+
+  lna-supply:
+    description: A separate regulator supplying power for the Low Noise
+      Amplifier (LNA). This is an amplifier connected between the GNSS
+      device and the receiver antenna.
+
+  enable-gpios:
+    description: A GPIO line that will enable the GNSS receiver when
+      asserted. If this line is active low, the GPIO phandle should
+      consequently be tagged with the GPIO_ACTIVE_LOW flag so the operating
+      system can rely on asserting the line to enable the GNSS device.
+    maxItems: 1
+
+  timepulse-gpios:
+    description: When a timepulse is provided to the GNSS device using a
+      GPIO line, this is used.
+    maxItems: 1
+
+  current-speed:
+    description: The baudrate in bits per second of the device as it comes
+      online, current active speed.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+      gnss {
+        compatible = "u-blox,neo-8";
+        vcc-supply = <&gnss_reg>;
+        timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+        current-speed = <4800>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/gnss.txt b/Documentation/devicetree/bindings/gnss/gnss.txt
deleted file mode 100644
index d6dc9c0d8249..000000000000
--- a/Documentation/devicetree/bindings/gnss/gnss.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-GNSS Receiver DT binding
-
-This documents the binding structure and common properties for GNSS receiver
-devices.
-
-A GNSS receiver node is a node named "gnss" and typically resides on a serial
-bus (e.g. UART, I2C or SPI).
-
-Please refer to the following documents for generic properties:
-
-	Documentation/devicetree/bindings/serial/serial.yaml
-	Documentation/devicetree/bindings/spi/spi-bus.txt
-
-Required properties:
-
-- compatible	: A string reflecting the vendor and specific device the node
-		  represents
-
-Optional properties:
-- lna-supply	: Separate supply for an LNA
-- enable-gpios	: GPIO used to enable the device
-- timepulse-gpios	: Time pulse GPIO
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "u-blox,neo-8";
-
-		vcc-supply = <&gnss_reg>;
-		timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-
-		current-speed = <4800>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.txt b/Documentation/devicetree/bindings/gnss/mediatek.txt
deleted file mode 100644
index 80cb802813c5..000000000000
--- a/Documentation/devicetree/bindings/gnss/mediatek.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Mediatek-based GNSS Receiver DT binding
-
-Mediatek chipsets are used in GNSS-receiver modules produced by several
-vendors and can use a UART interface.
-
-Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
-properties.
-
-Required properties:
-
-- compatible	: Must be
-
-			"globaltop,pa6h"
-
-- vcc-supply	: Main voltage regulator (pin name: VCC)
-
-Optional properties:
-
-- current-speed		: Default UART baud rate
-- gnss-fix-gpios	: GPIO used to determine device position fix state
-			  (pin name: FIX, 3D_FIX)
-- reset-gpios		: GPIO used to reset the device (pin name: RESET, NRESET)
-- timepulse-gpios	: Time pulse GPIO (pin name: PPS1, 1PPS)
-- vbackup-supply	: Backup voltage regulator (pin name: VBAT, VBACKUP)
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "globaltop,pa6h";
-		vcc-supply = <&vcc_3v3>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gnss/mediatek.yaml b/Documentation/devicetree/bindings/gnss/mediatek.yaml
new file mode 100644
index 000000000000..c0eb35beb2ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/mediatek.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/mediatek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek GNSS Receiver
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description:
+  Mediatek chipsets are used in GNSS-receiver modules produced by several
+  vendors and can use a UART interface.
+
+allOf:
+  - $ref: gnss-common.yaml#
+
+properties:
+  compatible:
+    const: globaltop,pa6h
+
+  vcc-supply:
+    description:
+      Main voltage regulator, pin name VCC.
+
+  reset-gpios:
+    maxItems: 1
+    description: An optional reset line, with names such as RESET or NRESET.
+      If the line is active low it should be flagged with GPIO_ACTIVE_LOW.
+
+  timepulse-gpios:
+    description: Comes with pin names such as PPS1 or 1PPS.
+
+  gnss-fix-gpios:
+    maxItems: 1
+    description: GPIO used to determine device position fix state, pin names
+      FIX or 3D_FIX.
+
+  vbackup-supply:
+    description:
+      Regulator providing backup voltage, pin names such as VBAT or VBACKUP.
+
+required:
+  - compatible
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+        gnss {
+            compatible = "globaltop,pa6h";
+            vcc-supply = <&vcc_3v3>;
+            reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.txt b/Documentation/devicetree/bindings/gnss/sirfstar.txt
deleted file mode 100644
index f4252b6b660b..000000000000
--- a/Documentation/devicetree/bindings/gnss/sirfstar.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-SiRFstar-based GNSS Receiver DT binding
-
-SiRFstar chipsets are used in GNSS-receiver modules produced by several
-vendors and can use UART, SPI or I2C interfaces.
-
-Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
-properties.
-
-Required properties:
-
-- compatible	: Must be one of
-
-			"fastrax,uc430"
-			"linx,r4"
-			"wi2wi,w2sg0004"
-			"wi2wi,w2sg0008i"
-			"wi2wi,w2sg0084i"
-
-- vcc-supply	: Main voltage regulator (pin name: 3V3_IN, VCC, VDD)
-
-Required properties (I2C):
-- reg		: I2C slave address
-
-Required properties (SPI):
-- reg		: SPI chip select address
-
-Optional properties:
-
-- sirf,onoff-gpios	: GPIO used to power on and off device (pin name: ON_OFF)
-- sirf,wakeup-gpios	: GPIO used to determine device power state
-			  (pin name: RFPWRUP, WAKEUP)
-- timepulse-gpios	: Time pulse GPIO (pin name: 1PPS, TM)
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "wi2wi,w2sg0084i";
-
-		vcc-supply = <&gnss_reg>;
-		sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.yaml b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
new file mode 100644
index 000000000000..0bbe684d82e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/sirfstar.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/sirfstar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiRFstar GNSS Receiver
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description:
+  The SiRFstar GNSS receivers have incarnated over the years in different
+  chips, starting from the SiRFstarIII which was a chip that was introduced in
+  2004 and used in a lot of dedicated GPS devices. In 2009 SiRF was acquired
+  by CSR (Cambridge Silicon Radio) and in 2012 the CSR GPS business was
+  acquired by Samsung, while some products remained with CSR. In 2014 CSR
+  was acquired by Qualcomm who still sell some of the SiRF products.
+
+  SiRF chips can be used over UART, I2C or SPI buses.
+
+allOf:
+  - $ref: gnss-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - csr,gsd4t
+      - csr,csrg05ta03-icje-r
+      - fastrax,uc430
+      - linx,r4
+      - wi2wi,w2sg0004
+      - wi2wi,w2sg0008i
+      - wi2wi,w2sg0084i
+
+  reg:
+    description:
+      The I2C Address, SPI chip select address. Not required on UART buses.
+
+  vcc-supply:
+    description:
+      Main voltage regulator, pin names such as 3V3_IN, VCC, VDD.
+
+  reset-gpios:
+    maxItems: 1
+    description: An optional active low reset line, should be flagged with
+      GPIO_ACTIVE_LOW.
+
+  sirf,onoff-gpios:
+    maxItems: 1
+    description: GPIO used to power on and off device, pin name ON_OFF.
+
+  sirf,wakeup-gpios:
+    maxItems: 1
+    description: GPIO used to determine device power state, pin names such
+      as RFPWRUP, WAKEUP.
+
+required:
+  - compatible
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+        gnss {
+            compatible = "wi2wi,w2sg0084i";
+            vcc-supply = <&gnss_vcc_reg>;
+            reset-gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+            sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+            sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+            current-speed = <38400>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
new file mode 100644
index 000000000000..4835a280b3bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gnss/u-blox,neo-6m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: U-blox GNSS Receiver
+
+allOf:
+  - $ref: gnss-common.yaml#
+
+maintainers:
+  - Johan Hovold <johan@kernel.org>
+
+description: >
+  The U-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces.
+
+properties:
+  compatible:
+    enum:
+      - u-blox,neo-6m
+      - u-blox,neo-8
+      - u-blox,neo-m8
+
+  reg:
+    description: >
+      The DDC Slave Address, SPI chip select address, the number of the USB hub
+      port or the USB host-controller port to which this device is attached,
+      depending on the bus used. Required for the DDC, SPI or USB busses.
+
+  vcc-supply:
+    description: >
+      Main voltage regulator
+
+  u-blox,extint-gpios:
+    maxItems: 1
+    description: >
+      GPIO connected to the "external interrupt" input pin
+
+  v-bckp-supply:
+    description: >
+      Backup voltage regulator
+
+required:
+  - compatible
+  - vcc-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    serial {
+        gnss {
+            compatible = "u-blox,neo-8";
+            v-bckp-supply = <&gnss_v_bckp_reg>;
+            vcc-supply = <&gnss_vcc_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gnss/u-blox.txt b/Documentation/devicetree/bindings/gnss/u-blox.txt
deleted file mode 100644
index 7cdefd058fe0..000000000000
--- a/Documentation/devicetree/bindings/gnss/u-blox.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-u-blox GNSS Receiver DT binding
-
-The u-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces.
-
-Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
-properties.
-
-Required properties:
-
-- compatible	: Must be one of
-
-			"u-blox,neo-6m"
-			"u-blox,neo-8"
-			"u-blox,neo-m8"
-
-- vcc-supply	: Main voltage regulator
-
-Required properties (DDC):
-- reg		: DDC (I2C) slave address
-
-Required properties (SPI):
-- reg		: SPI chip select address
-
-Required properties (USB):
-- reg		: Number of the USB hub port or the USB host-controller port
-                  to which this device is attached
-
-Optional properties:
-
-- timepulse-gpios	: Time pulse GPIO
-- u-blox,extint-gpios	: GPIO connected to the "external interrupt" input pin
-- v-bckp-supply	: Backup voltage regulator
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "u-blox,neo-8";
-
-		v-bckp-supply = <&gnss_v_bckp_reg>;
-		vcc-supply = <&gnss_vcc_reg>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
new file mode 100644
index 000000000000..7c41d8e814cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/airoha,en7523-gpio.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/airoha,en7523-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7523 GPIO controller
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+description: |
+  Airoha's GPIO controller on their ARM EN7523 SoCs consists of two banks of 32
+  GPIOs.
+
+properties:
+  $nodename:
+    pattern: "^gpio@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - const: airoha,en7523-gpio
+
+  reg:
+    description: |
+      The first tuple points to the input register.
+      The second and third tuple point to the direction registers
+      The fourth tuple points to the output register
+    maxItems: 4
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio@1fbf0200 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0204 0x4>,
+              <0x1fbf0200 0x4>,
+              <0x1fbf0220 0x4>,
+              <0x1fbf0214 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+    gpio1: gpio@1fbf0270 {
+        compatible = "airoha,en7523-gpio";
+        reg = <0x1fbf0270 0x4>,
+              <0x1fbf0260 0x4>,
+              <0x1fbf0264 0x4>,
+              <0x1fbf0278 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
deleted file mode 100644
index 5d468ecd1809..000000000000
--- a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-Broadcom STB "UPG GIO" GPIO controller
-
-The controller's registers are organized as sets of eight 32-bit
-registers with each set controlling a bank of up to 32 pins.  A single
-interrupt is shared for all of the banks handled by the controller.
-
-Required properties:
-
-- compatible:
-    Must be "brcm,brcmstb-gpio"
-
-- reg:
-    Define the base and range of the I/O address space containing
-    the brcmstb GPIO controller registers
-
-- #gpio-cells:
-    Should be <2>.  The first cell is the pin number (within the controller's
-    pin space), and the second is used for the following:
-    bit[0]: polarity (0 for active-high, 1 for active-low)
-
-- gpio-controller:
-    Specifies that the node is a GPIO controller.
-
-- brcm,gpio-bank-widths:
-    Number of GPIO lines for each bank.  Number of elements must
-    correspond to number of banks suggested by the 'reg' property.
-
-Optional properties:
-
-- interrupts:
-    The interrupt shared by all GPIO lines for this controller.
-
-- interrupts-extended:
-    Alternate form of specifying interrupts and parents that allows for
-    multiple parents.  This takes precedence over 'interrupts' and
-    'interrupt-parent'.  Wakeup-capable GPIO controllers often route their
-    wakeup interrupt lines through a different interrupt controller than the
-    primary interrupt line, making this property necessary.
-
-- #interrupt-cells:
-    Should be <2>.  The first cell is the GPIO number, the second should specify
-    flags.  The following subset of flags is supported:
-    - bits[3:0] trigger type and level flags
-        1 = low-to-high edge triggered
-        2 = high-to-low edge triggered
-        4 = active high level-sensitive
-        8 = active low level-sensitive
-      Valid combinations are 1, 2, 3, 4, 8.
-    See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-- interrupt-controller:
-    Marks the device node as an interrupt controller
-
-- wakeup-source:
-    GPIOs for this controller can be used as a wakeup source
-
-Example:
-	upg_gio: gpio@f040a700 {
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
-		gpio-controller;
-		interrupt-controller;
-		reg = <0xf040a700 0x80>;
-		interrupt-parent = <&irq0_intc>;
-		interrupts = <0x6>;
-		brcm,gpio-bank-widths = <32 32 32 24>;
-	};
-
-	upg_gio_aon: gpio@f04172c0 {
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
-		gpio-controller;
-		interrupt-controller;
-		reg = <0xf04172c0 0x40>;
-		interrupt-parent = <&irq0_aon_intc>;
-		interrupts = <0x6>;
-		interrupts-extended = <&irq0_aon_intc 0x6>,
-			<&aon_pm_l2_intc 0x5>;
-		wakeup-source;
-		brcm,gpio-bank-widths = <18 4>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
new file mode 100644
index 000000000000..4a896ff7edc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,brcmstb-gpio.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,brcmstb-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom STB "UPG GIO" GPIO controller
+
+description: >
+  The controller's registers are organized as sets of eight 32-bit
+  registers with each set controlling a bank of up to 32 pins.  A single
+  interrupt is shared for all of the banks handled by the controller.
+
+maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7445-gpio
+      - const: brcm,brcmstb-gpio
+
+  reg:
+    maxItems: 1
+    description: >
+      Define the base and range of the I/O address space containing
+      the brcmstb GPIO controller registers
+
+  "#gpio-cells":
+    const: 2
+    description: >
+      The first cell is the pin number (within the controller's
+      pin space), and the second is used for the following:
+      bit[0]: polarity (0 for active-high, 1 for active-low)
+
+  gpio-controller: true
+
+  brcm,gpio-bank-widths:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      Number of GPIO lines for each bank.  Number of elements must
+      correspond to number of banks suggested by the 'reg' property.
+
+  interrupts:
+    maxItems: 1
+    description: >
+      The interrupt shared by all GPIO lines for this controller.
+
+  "#interrupt-cells":
+    const: 2
+    description: |
+      The first cell is the GPIO number, the second should specify
+      flags.  The following subset of flags is supported:
+      - bits[3:0] trigger type and level flags
+        1 = low-to-high edge triggered
+        2 = high-to-low edge triggered
+        4 = active high level-sensitive
+        8 = active low level-sensitive
+      Valid combinations are 1, 2, 3, 4, 8.
+
+  interrupt-controller: true
+
+  wakeup-source:
+    type: boolean
+    description: >
+      GPIOs for this controller can be used as a wakeup source
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - "brcm,gpio-bank-widths"
+
+additionalProperties: false
+
+examples:
+  - |
+    upg_gio: gpio@f040a700 {
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+        gpio-controller;
+        interrupt-controller;
+        reg = <0xf040a700 0x80>;
+        interrupt-parent = <&irq0_intc>;
+        interrupts = <0x6>;
+        brcm,gpio-bank-widths = <32 32 32 24>;
+    };
+
+    upg_gio_aon: gpio@f04172c0 {
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+        gpio-controller;
+        interrupt-controller;
+        reg = <0xf04172c0 0x40>;
+        interrupt-parent = <&irq0_aon_intc>;
+        interrupts = <0x6>;
+        wakeup-source;
+        brcm,gpio-bank-widths = <18 4>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml b/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml
new file mode 100644
index 000000000000..e3e668a12091
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/delta,tn48m-gpio.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/delta,tn48m-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD GPIO controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  This module is part of the Delta TN48M multi-function device. For more
+  details see ../mfd/delta,tn48m-cpld.yaml.
+
+  Delta TN48M has an onboard Lattice CPLD that is used as an GPIO expander.
+  It provides 12 pins in total, they are input-only or ouput-only type.
+
+properties:
+  compatible:
+    enum:
+      - delta,tn48m-gpo
+      - delta,tn48m-gpi
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - reg
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
index 5fe19fa5f67c..c0ad70e66f76 100644
--- a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
+++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
@@ -26,14 +26,13 @@ properties:
     const: 2
 
   registers-number:
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: Number of daisy-chained shift registers
 
   enable-gpios:
     description: GPIO connected to the OE (Output Enable) pin.
     maxItems: 1
 
-  spi-max-frequency: true
-
 patternProperties:
   "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
     type: object
@@ -58,7 +57,10 @@ required:
   - '#gpio-cells'
   - registers-number
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.txt b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.txt
deleted file mode 100644
index d04236558619..000000000000
--- a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Faraday Technology FTGPIO010 GPIO Controller
-
-Required properties:
-
-- compatible : Should be one of
-  "cortina,gemini-gpio", "faraday,ftgpio010"
-  "moxa,moxart-gpio", "faraday,ftgpio010"
-  "faraday,ftgpio010"
-- reg : Should contain registers location and length
-- interrupts : Should contain the interrupt line for the GPIO block
-- gpio-controller : marks this as a GPIO controller
-- #gpio-cells : Should be 2, see gpio/gpio.txt
-- interrupt-controller : marks this as an interrupt controller
-- #interrupt-cells : a standard two-cell interrupt flag, see
-  interrupt-controller/interrupts.txt
-
-Example:
-
-gpio@4d000000 {
-	compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
-	reg = <0x4d000000 0x100>;
-	interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml
new file mode 100644
index 000000000000..640da5b9b0cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/faraday,ftgpio010.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTGPIO010 GPIO Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: cortina,gemini-gpio
+          - const: faraday,ftgpio010
+      - items:
+          - const: moxa,moxart-gpio
+          - const: faraday,ftgpio010
+      - const: faraday,ftgpio010
+
+  reg:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: Should contain the interrupt line for the GPIO block
+
+  gpio-controller: true
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    gpio@4d000000 {
+      compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+      reg = <0x4d000000 0x100>;
+      interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml b/Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml
new file mode 100644
index 000000000000..65b6970e42fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fcs,fxl6408.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fcs,fxl6408.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fairchild FXL6408 I2C GPIO Expander
+
+maintainers:
+  - Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
+
+properties:
+  compatible:
+    enum:
+      - fcs,fxl6408
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 8
+
+patternProperties:
+  "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio_expander_43: gpio-expander@43 {
+            compatible = "fcs,fxl6408";
+            reg = <0x43>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-line-names = "Wi-Fi_W_DISABLE", "Wi-Fi_WKUP_WLAN",
+                              "PWR_EN_+V3.3_WiFi_N", "PCIe_REF_CLK_EN",
+                              "USB_RESET_N", "USB_BYPASS_N", "Wi-Fi_PDn",
+                              "Wi-Fi_WKUP_BT";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/fsl,imx8qxp-sc-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl,imx8qxp-sc-gpio.yaml
new file mode 100644
index 000000000000..b7b32220935d
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fsl,imx8qxp-sc-gpio.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fsl,imx8qxp-sc-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO driver over IMX SCU firmware API
+
+maintainers:
+  - Shenwei Wang <shenwei.wang@nxp.com>
+
+description: |
+  This module provides the standard interface to control the
+  resource pins in SCU domain on i.MX8 platforms.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qxp-sc-gpio
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio {
+        compatible = "fsl,imx8qxp-sc-gpio";
+        gpio-controller;
+        #gpio-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
index f57d22d1ebd6..ae18603697d7 100644
--- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
@@ -37,6 +37,8 @@ properties:
               - fsl,imx8mp-gpio
               - fsl,imx8mq-gpio
               - fsl,imx8qxp-gpio
+              - fsl,imxrt1050-gpio
+              - fsl,imxrt1170-gpio
           - const: fsl,imx35-gpio
 
   reg:
diff --git a/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.txt b/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.txt
deleted file mode 100644
index bef353f370d8..000000000000
--- a/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Fujitsu MB86S7x GPIO Controller
--------------------------------
-
-Required properties:
-- compatible: Should be "fujitsu,mb86s70-gpio"
-- reg: Base address and length of register space
-- clocks: Specify the clock
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be <2>. The first cell is the pin number and the
-  second cell is used to specify optional parameters:
-   - bit 0 specifies polarity (0 for normal, 1 for inverted).
-
-Examples:
-	gpio0: gpio@31000000 {
-		compatible = "fujitsu,mb86s70-gpio";
-		reg = <0 0x31000000 0x10000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		clocks = <&clk 0 2 1>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.yaml b/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.yaml
new file mode 100644
index 000000000000..d18d95285465
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fujitsu,mb86s70-gpio.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fujitsu,mb86s70-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fujitsu MB86S7x GPIO Controller
+
+maintainers:
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: socionext,synquacer-gpio
+          - const: fujitsu,mb86s70-gpio
+      - const: fujitsu,mb86s70-gpio
+
+  reg:
+    maxItems: 1
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller: true
+  gpio-line-names: true
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - '#gpio-cells'
+  - gpio-controller
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@31000000 {
+        compatible = "fujitsu,mb86s70-gpio";
+        reg = <0x31000000 0x10000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        clocks = <&clk 0 2 1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/gpio-altera.txt b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
index 146e554b3c67..2a80e272cd66 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-altera.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-altera.txt
@@ -9,8 +9,9 @@ Required properties:
   - The second cell is reserved and is currently unused.
 - gpio-controller : Marks the device node as a GPIO controller.
 - interrupt-controller: Mark the device node as an interrupt controller
-- #interrupt-cells : Should be 1. The interrupt type is fixed in the hardware.
+- #interrupt-cells : Should be 2. The interrupt type is fixed in the hardware.
   - The first cell is the GPIO offset number within the GPIO controller.
+  - The second cell is the interrupt trigger type and level flags.
 - interrupts: Specify the interrupt.
 - altr,interrupt-type: Specifies the interrupt trigger type the GPIO
   hardware is synthesized. This field is required if the Altera GPIO controller
@@ -38,6 +39,6 @@ gpio_altr: gpio@ff200000 {
 	altr,interrupt-type = <IRQ_TYPE_EDGE_RISING>;
 	#gpio-cells = <2>;
 	gpio-controller;
-	#interrupt-cells = <1>;
+	#interrupt-cells = <2>;
 	interrupt-controller;
 };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
deleted file mode 100644
index fc42b2caa06d..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-AXP209 GPIO & pinctrl controller
-
-This driver follows the usual GPIO bindings found in
-Documentation/devicetree/bindings/gpio/gpio.txt
-
-This driver follows the usual pinctrl bindings found in
-Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-This driver employs the per-pin muxing pattern.
-
-Required properties:
-- compatible: Should be one of:
-	- "x-powers,axp209-gpio"
-	- "x-powers,axp813-gpio"
-- #gpio-cells: Should be two. The first cell is the pin number and the
-  second is the GPIO flags.
-- gpio-controller: Marks the device node as a GPIO controller.
-
-This node must be a subnode of the axp20x PMIC, documented in
-Documentation/devicetree/bindings/mfd/axp20x.txt
-
-Example:
-
-axp209: pmic@34 {
-	compatible = "x-powers,axp209";
-	reg = <0x34>;
-	interrupt-parent = <&nmi_intc>;
-	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-	axp_gpio: gpio {
-		compatible = "x-powers,axp209-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-};
-
-The GPIOs can be muxed to other functions and therefore, must be a subnode of
-axp_gpio.
-
-Example:
-
-&axp_gpio {
-	gpio0_adc: gpio0-adc {
-		pins = "GPIO0";
-		function = "adc";
-	};
-};
-
-&example_node {
-	pinctrl-names = "default";
-	pinctrl-0 = <&gpio0_adc>;
-};
-
-GPIOs and their functions
--------------------------
-
-Each GPIO is independent from the other (i.e. GPIO0 in gpio_in function does
-not force GPIO1 and GPIO2 to be in gpio_in function as well).
-
-axp209
-------
-GPIO	|	Functions
-------------------------
-GPIO0	|	gpio_in, gpio_out, ldo, adc
-GPIO1	|	gpio_in, gpio_out, ldo, adc
-GPIO2	|	gpio_in, gpio_out
-
-axp813
-------
-GPIO	|	Functions
-------------------------
-GPIO0	|	gpio_in, gpio_out, ldo, adc
-GPIO1	|	gpio_in, gpio_out, ldo
diff --git a/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
new file mode 100644
index 000000000000..40d0be31e200
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-consumer-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common GPIO lines
+
+maintainers:
+  - Bartosz Golaszewski <brgl@bgdev.pl>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Pay attention to using proper GPIO flag (e.g. GPIO_ACTIVE_LOW) for the GPIOs
+  using inverted signal (e.g. RESETN).
+
+select: true
+
+properties:
+  enable-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the enable control pin.
+
+  reset-gpios:
+    description:
+      GPIO (or GPIOs for power sequence) connected to the device reset pin
+      (e.g. RESET or RESETN).
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the power down pin (hardware power down or power cut,
+      e.g. PD or PWDN).
+
+  pwdn-gpios:
+    maxItems: 1
+    description: Use powerdown-gpios
+    deprecated: true
+
+  wakeup-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the pin waking up the device from suspend or other
+      power-saving modes.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mmc-pwrseq-simple
+    then:
+      properties:
+        reset-gpios:
+          minItems: 1
+          maxItems: 32
+    else:
+      properties:
+        reset-gpios:
+          maxItems: 1
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml b/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
index f32e09ef937c..10e56cf306db 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.yaml
@@ -35,7 +35,7 @@ properties:
   gpio-line-names:
     description: strings describing the names of each gpio line.
     minItems: 1
-    maxItems: 100
+    maxItems: 144
 
   "#gpio-cells":
     const: 2
diff --git a/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt b/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt
deleted file mode 100644
index 54040a2bfe3a..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-eic-sprd.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-Spreadtrum EIC controller bindings
-
-The EIC is the abbreviation of external interrupt controller, which can
-be used only in input mode. The Spreadtrum platform has 2 EIC controllers,
-one is in digital chip, and another one is in PMIC. The digital chip EIC
-controller contains 4 sub-modules: EIC-debounce, EIC-latch, EIC-async and
-EIC-sync. But the PMIC EIC controller contains only one EIC-debounce sub-
-module.
-
-The EIC-debounce sub-module provides up to 8 source input signal
-connections. A debounce mechanism is used to capture the input signals'
-stable status (millisecond resolution) and a single-trigger mechanism
-is introduced into this sub-module to enhance the input event detection
-reliability. In addition, this sub-module's clock can be shut off
-automatically to reduce power dissipation. Moreover the debounce range
-is from 1ms to 4s with a step size of 1ms. The input signal will be
-ignored if it is asserted for less than 1 ms.
-
-The EIC-latch sub-module is used to latch some special power down signals
-and generate interrupts, since the EIC-latch does not depend on the APB
-clock to capture signals.
-
-The EIC-async sub-module uses a 32kHz clock to capture the short signals
-(microsecond resolution) to generate interrupts by level or edge trigger.
-
-The EIC-sync is similar with GPIO's input function, which is a synchronized
-signal input register. It can generate interrupts by level or edge trigger
-when detecting input signals.
-
-Required properties:
-- compatible: Should be one of the following:
-  "sprd,sc9860-eic-debounce",
-  "sprd,sc9860-eic-latch",
-  "sprd,sc9860-eic-async",
-  "sprd,sc9860-eic-sync",
-  "sprd,sc2731-eic".
-- reg: Define the base and range of the I/O address space containing
-  the GPIO controller registers.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be <2>. The first cell is the gpio number and
-  the second cell is used to specify optional parameters.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be <2>. Specifies the number of cells needed
-  to encode interrupt source.
-- interrupts: Should be the port interrupt shared by all the gpios.
-
-Example:
-	eic_debounce: gpio@40210000 {
-		compatible = "sprd,sc9860-eic-debounce";
-		reg = <0 0x40210000 0 0x80>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	eic_latch: gpio@40210080 {
-		compatible = "sprd,sc9860-eic-latch";
-		reg = <0 0x40210080 0 0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	eic_async: gpio@402100a0 {
-		compatible = "sprd,sc9860-eic-async";
-		reg = <0 0x402100a0 0 0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	eic_sync: gpio@402100c0 {
-		compatible = "sprd,sc9860-eic-sync";
-		reg = <0 0x402100c0 0 0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-	pmic_eic: gpio@300 {
-		compatible = "sprd,sc2731-eic";
-		reg = <0x300>;
-		interrupt-parent = <&sc2731_pmic>;
-		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-latch.yaml b/Documentation/devicetree/bindings/gpio/gpio-latch.yaml
new file mode 100644
index 000000000000..1ed82a2cebda
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-latch.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-latch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO latch controller
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+description: |
+  This binding describes a GPIO multiplexer based on latches connected to
+  other GPIOs, like this:
+
+  CLK0 ----------------------.        ,--------.
+  CLK1 -------------------.  `--------|>    #0 |
+                          |           |        |
+  OUT0 ----------------+--|-----------|D0    Q0|-----|<
+  OUT1 --------------+-|--|-----------|D1    Q1|-----|<
+  OUT2 ------------+-|-|--|-----------|D2    Q2|-----|<
+  OUT3 ----------+-|-|-|--|-----------|D3    Q3|-----|<
+  OUT4 --------+-|-|-|-|--|-----------|D4    Q4|-----|<
+  OUT5 ------+-|-|-|-|-|--|-----------|D5    Q5|-----|<
+  OUT6 ----+-|-|-|-|-|-|--|-----------|D6    Q6|-----|<
+  OUT7 --+-|-|-|-|-|-|-|--|-----------|D7    Q7|-----|<
+         | | | | | | | |  |           `--------'
+         | | | | | | | |  |
+         | | | | | | | |  |           ,--------.
+         | | | | | | | |  `-----------|>    #1 |
+         | | | | | | | |              |        |
+         | | | | | | | `--------------|D0    Q0|-----|<
+         | | | | | | `----------------|D1    Q1|-----|<
+         | | | | | `------------------|D2    Q2|-----|<
+         | | | | `--------------------|D3    Q3|-----|<
+         | | | `----------------------|D4    Q4|-----|<
+         | | `------------------------|D5    Q5|-----|<
+         | `--------------------------|D6    Q6|-----|<
+         `----------------------------|D7    Q7|-----|<
+                                      `--------'
+
+  The number of clk-gpios and latched-gpios is not fixed. The actual number
+  of number of latches and the number of inputs per latch is derived from
+  the number of GPIOs given in the corresponding device tree properties.
+
+properties:
+  compatible:
+    const: gpio-latch
+  "#gpio-cells":
+    const: 2
+
+  clk-gpios:
+    description: Array of GPIOs to be used to clock a latch
+
+  latched-gpios:
+    description: Array of GPIOs to be used as inputs per latch
+
+  setup-duration-ns:
+    description: Delay in nanoseconds to wait after the latch inputs have been
+      set up
+
+  clock-duration-ns:
+    description: Delay in nanoseconds to wait between clock output changes
+
+  gpio-controller: true
+
+  gpio-line-names: true
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+  - clk-gpios
+  - latched-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio-latch {
+        #gpio-cells = <2>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_di_do_leds>;
+        compatible = "gpio-latch";
+        gpio-controller;
+        setup-duration-ns = <100>;
+        clock-duration-ns = <100>;
+
+        clk-gpios = <&gpio3 7 0>, <&gpio3 8 0>;
+        latched-gpios = <&gpio3 21 0>, <&gpio3 22 0>,
+                       <&gpio3 23 0>, <&gpio3 24 0>,
+                       <&gpio3 25 0>, <&gpio3 26 0>,
+                       <&gpio3 27 0>, <&gpio3 28 0>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
deleted file mode 100644
index 0fc6700ed800..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-* Marvell EBU GPIO controller
-
-Required properties:
-
-- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio",
-  "marvell,armadaxp-gpio" or "marvell,armada-8k-gpio".
-
-    "marvell,orion-gpio" should be used for Orion, Kirkwood, Dove,
-    Discovery (except MV78200) and Armada 370. "marvell,mv78200-gpio"
-    should be used for the Discovery MV78200.
-
-    "marvel,armadaxp-gpio" should be used for all Armada XP SoCs
-    (MV78230, MV78260, MV78460).
-
-    "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K
-    SoCs (either from AP or CP), see
-    Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
-    for specific details about the offset property.
-
-- reg: Address and length of the register set for the device. Only one
-  entry is expected, except for the "marvell,armadaxp-gpio" variant
-  for which two entries are expected: one for the general registers,
-  one for the per-cpu registers. Not used for marvell,armada-8k-gpio.
-
-- interrupts: The list of interrupts that are used for all the pins
-  managed by this GPIO bank. There can be more than one interrupt
-  (example: 1 interrupt per 8 pins on Armada XP, which means 4
-  interrupts per bank of 32 GPIOs).
-
-- interrupt-controller: identifies the node as an interrupt controller
-
-- #interrupt-cells: specifies the number of cells needed to encode an
-  interrupt source. Should be two.
-  The first cell is the GPIO number.
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-
-- gpio-controller: marks the device node as a gpio controller
-
-- ngpios: number of GPIOs this controller has
-
-- #gpio-cells: Should be two. The first cell is the pin number. The
-  second cell is reserved for flags, unused at the moment.
-
-Optional properties:
-
-In order to use the GPIO lines in PWM mode, some additional optional
-properties are required.
-
-- compatible: Must contain "marvell,armada-370-gpio"
-
-- reg: an additional register set is needed, for the GPIO Blink
-  Counter on/off registers.
-
-- reg-names: Must contain an entry "pwm" corresponding to the
-  additional register range needed for PWM operation.
-
-- #pwm-cells: Should be two. The first cell is the GPIO line number. The
-  second cell is the period in nanoseconds.
-
-- clocks: Must be a phandle to the clock for the GPIO controller.
-
-Example:
-
-		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
-			ngpios = <32>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
-		};
-
-		gpio1: gpio@18140 {
-			compatible = "marvell,armada-370-gpio";
-			reg = <0x18140 0x40>, <0x181c8 0x08>;
-			reg-names = "gpio", "pwm";
-			ngpios = <17>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			#pwm-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <87>, <88>, <89>;
-			clocks = <&coreclk 0>;
-		};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
new file mode 100644
index 000000000000..f1bd1e6b2e1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-mvebu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell EBU GPIO controller
+
+maintainers:
+  - Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+  - Andrew Lunn <andrew@lunn.ch>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - marvell,armada-8k-gpio
+          - marvell,orion-gpio
+
+      - items:
+          - enum:
+              - marvell,mv78200-gpio
+              - marvell,armada-370-gpio
+          - const: marvell,orion-gpio
+
+      - description: Deprecated binding
+        items:
+          - const: marvell,armadaxp-gpio
+          - const: marvell,orion-gpio
+        deprecated: true
+
+  reg:
+    description: |
+      Address and length of the register set for the device. Not used for
+      marvell,armada-8k-gpio.
+
+      A second entry can be provided, for the PWM function using the GPIO Blink
+      Counter on/off registers.
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: gpio
+      - const: pwm
+    minItems: 1
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the gpio registers (in bytes)
+
+  interrupts:
+    description: |
+      The list of interrupts that are used for all the pins managed by this
+      GPIO bank. There can be more than one interrupt (example: 1 interrupt
+      per 8 pins on Armada XP, which means 4 interrupts per bank of 32
+      GPIOs).
+    minItems: 1
+    maxItems: 4
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  gpio-controller: true
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+  "#gpio-cells":
+    const: 2
+
+  marvell,pwm-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the pwm registers (in bytes)
+
+  "#pwm-cells":
+    description:
+      The first cell is the GPIO line number. The second cell is the period
+      in nanoseconds.
+    const: 2
+
+  clocks:
+    description:
+      Clock(s) used for PWM function.
+    items:
+      - description: Core clock
+      - description: AXI bus clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: core
+      - const: axi
+    minItems: 1
+
+required:
+  - compatible
+  - gpio-controller
+  - ngpios
+  - "#gpio-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,armada-8k-gpio
+    then:
+      required:
+        - offset
+    else:
+      required:
+        - reg
+
+unevaluatedProperties: true
+
+examples:
+  - |
+    gpio@d0018100 {
+      compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio";
+      reg = <0xd0018100 0x40>, <0xd0018800 0x30>;
+      ngpios = <32>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <16>, <17>, <18>, <19>;
+    };
+
+  - |
+    gpio@18140 {
+      compatible = "marvell,armada-370-gpio", "marvell,orion-gpio";
+      reg = <0x18140 0x40>, <0x181c8 0x08>;
+      reg-names = "gpio", "pwm";
+      ngpios = <17>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      #pwm-cells = <2>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <87>, <88>, <89>;
+      clocks = <&coreclk 0>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
index 338c5312a106..5b0134304e51 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
@@ -12,7 +12,9 @@ maintainers:
 properties:
   compatible:
     enum:
+      - dlg,slg7xl45106
       - nxp,pca9570
+      - nxp,pca9571
 
   reg:
     maxItems: 1
@@ -32,7 +34,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
index b6a6e742b66d..fa116148ee90 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
@@ -15,51 +15,59 @@ description: |+
 
 properties:
   compatible:
-    enum:
-      - exar,xra1202
-      - maxim,max7310
-      - maxim,max7312
-      - maxim,max7313
-      - maxim,max7315
-      - maxim,max7319
-      - maxim,max7320
-      - maxim,max7321
-      - maxim,max7322
-      - maxim,max7323
-      - maxim,max7324
-      - maxim,max7325
-      - maxim,max7326
-      - maxim,max7327
-      - nxp,pca6416
-      - nxp,pca9505
-      - nxp,pca9506
-      - nxp,pca9534
-      - nxp,pca9535
-      - nxp,pca9536
-      - nxp,pca9537
-      - nxp,pca9538
-      - nxp,pca9539
-      - nxp,pca9554
-      - nxp,pca9555
-      - nxp,pca9556
-      - nxp,pca9557
-      - nxp,pca9574
-      - nxp,pca9575
-      - nxp,pca9698
-      - nxp,pcal6416
-      - nxp,pcal6524
-      - nxp,pcal9535
-      - nxp,pcal9554b
-      - nxp,pcal9555a
-      - onnn,cat9554
-      - onnn,pca9654
-      - ti,pca6107
-      - ti,pca9536
-      - ti,tca6408
-      - ti,tca6416
-      - ti,tca6424
-      - ti,tca9539
-      - ti,tca9554
+    oneOf:
+      - items:
+          - const: diodes,pi4ioe5v6534q
+          - const: nxp,pcal6534
+      - items:
+          - enum:
+              - exar,xra1202
+              - maxim,max7310
+              - maxim,max7312
+              - maxim,max7313
+              - maxim,max7315
+              - maxim,max7319
+              - maxim,max7320
+              - maxim,max7321
+              - maxim,max7322
+              - maxim,max7323
+              - maxim,max7324
+              - maxim,max7325
+              - maxim,max7326
+              - maxim,max7327
+              - nxp,pca6408
+              - nxp,pca6416
+              - nxp,pca9505
+              - nxp,pca9506
+              - nxp,pca9534
+              - nxp,pca9535
+              - nxp,pca9536
+              - nxp,pca9537
+              - nxp,pca9538
+              - nxp,pca9539
+              - nxp,pca9554
+              - nxp,pca9555
+              - nxp,pca9556
+              - nxp,pca9557
+              - nxp,pca9574
+              - nxp,pca9575
+              - nxp,pca9698
+              - nxp,pcal6408
+              - nxp,pcal6416
+              - nxp,pcal6524
+              - nxp,pcal6534
+              - nxp,pcal9535
+              - nxp,pcal9554b
+              - nxp,pcal9555a
+              - onnn,cat9554
+              - onnn,pca9654
+              - ti,pca6107
+              - ti,pca9536
+              - ti,tca6408
+              - ti,tca6416
+              - ti,tca6424
+              - ti,tca9539
+              - ti,tca9554
 
   reg:
     maxItems: 1
@@ -143,7 +151,7 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -169,7 +177,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c1 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -190,20 +198,12 @@ examples:
                               "chg-status+red", "green", "blue", "en-esata",
                               "fault1", "p26", "p27";
         };
-
-        ts3a227@3b {
-            compatible = "ti,ts3a227e";
-            reg = <0x3b>;
-            interrupt-parent = <&gpio99>;
-            interrupts = <14 IRQ_TYPE_EDGE_RISING>;
-            ti,micbias = <0>; /* 2.1V */
-        };
     };
 
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c2 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -221,7 +221,7 @@ examples:
     };
 
   - |
-    i2c3 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt b/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
index 414a01cdf715..fba3c61f6a5b 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt
@@ -14,7 +14,7 @@ Optional properties:
  - ngpios		: Number of used GPIO lines (0..n-1), default is 8.
  - load-gpios		: GPIO pin specifier attached to load enable, this
 			  pin is pulsed before reading from the device to
-			  load input pin values into the the device.
+			  load input pin values into the device.
 
 For other required and optional properties of SPI slave
 nodes please refer to ../spi/spi-bus.txt.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
deleted file mode 100644
index 5375625e8cd2..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Samsung Exynos4 GPIO Controller
-
-Required properties:
-- compatible: Compatible property value should be "samsung,exynos4-gpio>".
-
-- reg: Physical base address of the controller and length of memory mapped
-  region.
-
-- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes
-  should be the following with values derived from the SoC user manual.
-     <[phandle of the gpio controller node]
-      [pin number within the gpio controller]
-      [mux function]
-      [flags and pull up/down]
-      [drive strength]>
-
-  Values for gpio specifier:
-  - Pin number: is a value between 0 to 7.
-  - Flags and Pull Up/Down: 0 - Pull Up/Down Disabled.
-                            1 - Pull Down Enabled.
-                            3 - Pull Up Enabled.
-          Bit 16 (0x00010000) - Input is active low.
-  - Drive Strength: 0 - 1x,
-                    1 - 3x,
-                    2 - 2x,
-                    3 - 4x
-
-- gpio-controller: Specifies that the node is a gpio controller.
-- #address-cells: should be 1.
-- #size-cells: should be 1.
-
-Example:
-
-	gpa0: gpio-controller@11400000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "samsung,exynos4-gpio";
-		reg = <0x11400000 0x20>;
-		#gpio-cells = <4>;
-		gpio-controller;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-sprd.txt b/Documentation/devicetree/bindings/gpio/gpio-sprd.txt
deleted file mode 100644
index eca97d45388f..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-sprd.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-Spreadtrum GPIO controller bindings
-
-The controller's registers are organized as sets of sixteen 16-bit
-registers with each set controlling a bank of up to 16 pins. A single
-interrupt is shared for all of the banks handled by the controller.
-
-Required properties:
-- compatible: Should be "sprd,sc9860-gpio".
-- reg: Define the base and range of the I/O address space containing
-the GPIO controller registers.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be <2>. The first cell is the gpio number and
-the second cell is used to specify optional parameters.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be <2>. Specifies the number of cells needed
-to encode interrupt source.
-- interrupts: Should be the port interrupt shared by all the gpios.
-
-Example:
-	ap_gpio: gpio@40280000 {
-		compatible = "sprd,sc9860-gpio";
-		reg = <0 0x40280000 0 0x1000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
index a0e4cf885213..b33f8f02c0d7 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-stmpe.txt
@@ -8,8 +8,7 @@ Optional properties:
  - st,norequest-mask: bitmask specifying which GPIOs should _not_ be requestable
    due to different usage (e.g. touch, keypad)
 
-Node name must be stmpe_gpio and should be child node of stmpe node to which it
-belongs.
+Node should be child node of stmpe node to which it belongs.
 
 Example:
 	stmpe_gpio {
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt
deleted file mode 100644
index 1afc2de7a537..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-TPIC2810 GPIO controller bindings
-
-Required properties:
- - compatible		: Should be "ti,tpic2810".
- - reg			: The I2C address of the device
- - gpio-controller	: Marks the device node as a GPIO controller.
- - #gpio-cells		: Should be two. For consumer use see gpio.txt.
-
-Example:
-
-	gpio@60 {
-		compatible = "ti,tpic2810";
-		reg = <0x60>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml
new file mode 100644
index 000000000000..157969bc4c46
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-tpic2810.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-tpic2810.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPIC2810 GPIO controller
+
+maintainers:
+  - Aswath Govindraju <a-govindraju@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,tpic2810
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gpio@60 {
+            compatible = "ti,tpic2810";
+            reg = <0x60>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-line-names = "LED A", "LED B", "LED C";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
index 19738a457a58..d2c39dba56ad 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-vf610.yaml
@@ -24,6 +24,11 @@ properties:
       - items:
           - const: fsl,imx7ulp-gpio
           - const: fsl,vf610-gpio
+      - items:
+          - enum:
+              - fsl,imx93-gpio
+              - fsl,imx8ulp-gpio
+          - const: fsl,imx7ulp-gpio
 
   reg:
     description: The first reg tuple represents the PORT module, the second tuple
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt b/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
deleted file mode 100644
index e506f30e1a95..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Xilinx plb/axi GPIO controller
-
-Dual channel GPIO controller with configurable number of pins
-(from 1 to 32 per channel). Every pin can be configured as
-input/output/tristate. Both channels share the same global IRQ but
-local interrupts can be enabled on channel basis.
-
-Required properties:
-- compatible : Should be "xlnx,xps-gpio-1.00.a"
-- reg : Address and length of the register set for the device
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters (currently unused).
-- gpio-controller : Marks the device node as a GPIO controller.
-
-Optional properties:
-- clocks : Input clock specifier. Refer to common clock bindings.
-- interrupts : Interrupt mapping for GPIO IRQ.
-- xlnx,all-inputs : if n-th bit is setup, GPIO-n is input
-- xlnx,dout-default : if n-th bit is 1, GPIO-n default value is 1
-- xlnx,gpio-width : gpio width
-- xlnx,tri-default : if n-th bit is 1, GPIO-n is in tristate mode
-- xlnx,is-dual : if 1, controller also uses the second channel
-- xlnx,all-inputs-2 : as above but for the second channel
-- xlnx,dout-default-2 : as above but the second channel
-- xlnx,gpio2-width : as above but for the second channel
-- xlnx,tri-default-2 : as above but for the second channel
-
-
-Example:
-gpio: gpio@40000000 {
-	#gpio-cells = <2>;
-	compatible = "xlnx,xps-gpio-1.00.a";
-	clocks = <&clkc25>;
-	gpio-controller ;
-	interrupt-parent = <&microblaze_0_intc>;
-	interrupts = < 6 2 >;
-	reg = < 0x40000000 0x10000 >;
-	xlnx,all-inputs = <0x0>;
-	xlnx,all-inputs-2 = <0x0>;
-	xlnx,dout-default = <0x0>;
-	xlnx,dout-default-2 = <0x0>;
-	xlnx,gpio-width = <0x2>;
-	xlnx,gpio2-width = <0x2>;
-	xlnx,interrupt-present = <0x1>;
-	xlnx,is-dual = <0x1>;
-	xlnx,tri-default = <0xffffffff>;
-	xlnx,tri-default-2 = <0xffffffff>;
-} ;
diff --git a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt b/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
deleted file mode 100644
index 47fc64922fe0..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-xlp.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Netlogic XLP Family GPIO
-========================
-
-This GPIO driver is used for following Netlogic XLP SoCs:
-	XLP832, XLP316, XLP208, XLP980, XLP532
-This GPIO driver is also compatible with GPIO controller found on
-Broadcom Vulcan ARM64.
-
-Required properties:
--------------------
-
-- compatible: Should be one of the following:
-  - "netlogic,xlp832-gpio": For Netlogic XLP832
-  - "netlogic,xlp316-gpio": For Netlogic XLP316
-  - "netlogic,xlp208-gpio": For Netlogic XLP208
-  - "netlogic,xlp980-gpio": For Netlogic XLP980
-  - "netlogic,xlp532-gpio": For Netlogic XLP532
-  - "brcm,vulcan-gpio": For Broadcom Vulcan ARM64
-- reg: Physical base address and length of the controller's registers.
-- #gpio-cells: Should be two. The first cell is the pin number and the second
-  cell is used to specify optional parameters (currently unused).
-- gpio-controller: Marks the device node as a GPIO controller.
-- nr-gpios: Number of GPIO pins supported by the controller.
-- interrupt-cells: Should be two. The first cell is the GPIO Number. The
-  second cell is used to specify flags. The following subset of flags is
-  supported:
-  - trigger type:
-	1 = low to high edge triggered.
-	2 = high to low edge triggered.
-	4 = active high level-sensitive.
-	8 = active low level-sensitive.
-- interrupts: Interrupt number for this device.
-- interrupt-controller: Identifies the node as an interrupt controller.
-
-Example:
-
-	gpio: xlp_gpio@34000 {
-		compatible = "netlogic,xlp316-gpio";
-		reg = <0 0x34100 0x1000
-		       0 0x35100 0x1000>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		nr-gpios = <57>;
-
-		#interrupt-cells = <2>;
-		interrupt-parent = <&pic>;
-		interrupts = <39>;
-		interrupt-controller;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
index 378da2649e66..572e1718f501 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
@@ -4,14 +4,18 @@
 $id: http://devicetree.org/schemas/gpio/gpio-zynq.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx Zynq GPIO controller Device Tree Bindings
+title: Xilinx Zynq GPIO controller
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
 
 properties:
   compatible:
-    const: xlnx,zynq-gpio-1.0
+    enum:
+      - xlnx,zynq-gpio-1.0
+      - xlnx,zynqmp-gpio-1.0
+      - xlnx,versal-gpio-1.0
+      - xlnx,pmc-gpio-1.0
 
   reg:
     maxItems: 1
@@ -24,6 +28,11 @@ properties:
 
   gpio-controller: true
 
+  gpio-line-names:
+    description: strings describing the names of each gpio line
+    minItems: 58
+    maxItems: 174
+
   interrupt-controller: true
 
   "#interrupt-cells":
@@ -32,6 +41,54 @@ properties:
   clocks:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,zynqmp-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 174
+          maxItems: 174
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,zynq-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 118
+          maxItems: 118
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,versal-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 58
+          maxItems: 58
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - xlnx,pmc-gpio-1.0
+    then:
+      properties:
+        gpio-line-names:
+          minItems: 116
+          maxItems: 116
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index a8895d339bfe..d82c32217fff 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -154,18 +154,35 @@ of the GPIOs that can't be used.
 
 Optionally, a GPIO controller may have a "gpio-line-names" property. This is
 an array of strings defining the names of the GPIO lines going out of the
-GPIO controller. This name should be the most meaningful producer name
-for the system, such as a rail name indicating the usage. Package names
-such as pin name are discouraged: such lines have opaque names (since they
-are by definition generic purpose) and such names are usually not very
-helpful. For example "MMC-CD", "Red LED Vdd" and "ethernet reset" are
-reasonable line names as they describe what the line is used for. "GPIO0"
-is not a good name to give to a GPIO line. Placeholders are discouraged:
-rather use the "" (blank string) if the use of the GPIO line is undefined
-in your design. The names are assigned starting from line offset 0 from
-left to right from the passed array. An incomplete array (where the number
-of passed named are less than ngpios) will still be used up until the last
-provided valid line index.
+GPIO controller.
+
+For lines which are routed to on-board devices, this name should be
+the most meaningful producer name for the system, such as a rail name
+indicating the usage. Package names, such as a pin name, are discouraged:
+such lines have opaque names (since they are by definition general-purpose)
+and such names are usually not very helpful. For example "MMC-CD", "Red LED
+Vdd" and "ethernet reset" are reasonable line names as they describe what
+the line is used for. "GPIO0" is not a good name to give to a GPIO line
+that is hard-wired to a specific device.
+
+However, in the case of lines that are routed to a general purpose header
+(e.g. the Raspberry Pi 40-pin header), and therefore are not hard-wired to
+specific devices, using a pin number or the names on the header is fine
+provided these are real (preferably unique) names. Using an SoC's pad name
+or package name, or names made up from kernel-internal software constructs,
+are strongly discouraged. For example "pin8 [gpio14/uart0_txd]" is fine
+if the board's documentation labels pin 8 as such. However "PortB_24" (an
+example of a name from an SoC's reference manual) would not be desirable.
+
+In either case placeholders are discouraged: rather use the "" (blank
+string) if the use of the GPIO line is undefined in your design. Ideally,
+try to add comments to the dts file describing the naming the convention
+you have chosen, and specifying from where the names are derived.
+
+The names are assigned starting from line offset 0, from left to right,
+from the passed array. An incomplete array (where the number of passed
+names is less than ngpios) will be used up until the last provided valid
+line index.
 
 Example:
 
@@ -213,7 +230,7 @@ Example of two SOC GPIO banks defined as gpio-controller nodes:
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		line_b {
+		line_b-hog {
 			gpio-hog;
 			gpios = <6 0>;
 			output-low;
diff --git a/Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml b/Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml
new file mode 100644
index 000000000000..735d97d645a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/hisilicon,ascend910-gpio.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/hisilicon,ascend910-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon common GPIO controller
+
+maintainers:
+  - Jay Fang <f.fangjian@huawei.com>
+
+description:
+  The HiSilicon common GPIO controller can be used for many different
+  types of SoC such as Huawei Ascend AI series chips.
+
+properties:
+  compatible:
+    const: hisilicon,ascend910-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - gpio-controller
+  - "#gpio-cells"
+  - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio@840d0000 {
+      compatible = "hisilicon,ascend910-gpio";
+      reg = <0x840d0000 0x1000>;
+      ngpios = <32>;
+      gpio-controller;
+      #gpio-cells = <2>;
+      interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
new file mode 100644
index 000000000000..fb86e8ce6349
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/loongson,ls-gpio.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/loongson,ls-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson GPIO controller.
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k-gpio
+      - loongson,ls7a-gpio
+
+  reg:
+    maxItems: 1
+
+  ngpios:
+    minimum: 1
+    maximum: 64
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 64
+
+required:
+  - compatible
+  - reg
+  - ngpios
+  - "#gpio-cells"
+  - gpio-controller
+  - gpio-ranges
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio0: gpio@1fe00500 {
+      compatible = "loongson,ls2k-gpio";
+      reg = <0x1fe00500 0x38>;
+      ngpios = <64>;
+      #gpio-cells = <2>;
+      gpio-controller;
+      gpio-ranges = <&pctrl 0 0 15>,
+                    <&pctrl 16 16 15>,
+                    <&pctrl 32 32 10>,
+                    <&pctrl 44 44 20>;
+      interrupt-parent = <&liointc1>;
+      interrupts = <28 IRQ_TYPE_LEVEL_LOW>,
+                   <29 IRQ_TYPE_LEVEL_LOW>,
+                   <30 IRQ_TYPE_LEVEL_LOW>,
+                   <30 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <26 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <>,
+                   <>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>,
+                   <27 IRQ_TYPE_LEVEL_LOW>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml b/Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml
new file mode 100644
index 000000000000..1a472c05697c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/loongson,ls1x-gpio.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/loongson,ls1x-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 GPIO controller
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+properties:
+  compatible:
+    const: loongson,ls1x-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  ngpios:
+    minimum: 1
+    maximum: 32
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio0: gpio@1fd010c0 {
+        compatible = "loongson,ls1x-gpio";
+        reg = <0x1fd010c0 0x4>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        ngpios = <32>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
new file mode 100644
index 000000000000..d481e78958a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/microchip,mpfs-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS GPIO Controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - microchip,mpfs-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Interrupt mapping, one per GPIO. Maximum 32 GPIOs.
+    minItems: 1
+    maxItems: 32
+
+  interrupt-controller: true
+
+  clocks:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  "#interrupt-cells":
+    const: 1
+
+  ngpios:
+    description:
+      The number of GPIOs available.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  gpio-controller: true
+
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+  - "#gpio-cells"
+  - gpio-controller
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio@20122000 {
+        compatible = "microchip,mpfs-gpio";
+        reg = <0x20122000 0x1000>;
+        clocks = <&clkcfg 25>;
+        interrupt-parent = <&plic>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupts = <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>,
+                     <53>, <53>, <53>, <53>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml b/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
index fe1e1c63ffe3..18fe90387b87 100644
--- a/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
@@ -14,7 +14,9 @@ properties:
     pattern: "^gpio@[0-9a-f]+$"
 
   compatible:
-    const: mstar,msc313-gpio
+    enum:
+      - mstar,msc313-gpio
+      - sstar,ssd20xd-gpio
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt
deleted file mode 100644
index adff16c71d21..000000000000
--- a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.txt
+++ /dev/null
@@ -1,165 +0,0 @@
-NVIDIA Tegra186 GPIO controllers
-
-Tegra186 contains two GPIO controllers; a main controller and an "AON"
-controller. This binding document applies to both controllers. The register
-layouts for the controllers share many similarities, but also some significant
-differences. Hence, this document describes closely related but different
-bindings and compatible values.
-
-The Tegra186 GPIO controller allows software to set the IO direction of, and
-read/write the value of, numerous GPIO signals. Routing of GPIO signals to
-package balls is under the control of a separate pin controller HW block. Two
-major sets of registers exist:
-
-a) Security registers, which allow configuration of allowed access to the GPIO
-register set. These registers exist in a single contiguous block of physical
-address space. The size of this block, and the security features available,
-varies between the different GPIO controllers.
-
-Access to this set of registers is not necessary in all circumstances. Code
-that wishes to configure access to the GPIO registers needs access to these
-registers to do so. Code which simply wishes to read or write GPIO data does not
-need access to these registers.
-
-b) GPIO registers, which allow manipulation of the GPIO signals. In some GPIO
-controllers, these registers are exposed via multiple "physical aliases" in
-address space, each of which access the same underlying state. See the hardware
-documentation for rationale. Any particular GPIO client is expected to access
-just one of these physical aliases.
-
-Tegra HW documentation describes a unified naming convention for all GPIOs
-implemented by the SoC. Each GPIO is assigned to a port, and a port may control
-a number of GPIOs. Thus, each GPIO is named according to an alphabetical port
-name and an integer GPIO name within the port. For example, GPIO_PA0, GPIO_PN6,
-or GPIO_PCC3.
-
-The number of ports implemented by each GPIO controller varies. The number of
-implemented GPIOs within each port varies. GPIO registers within a controller
-are grouped and laid out according to the port they affect.
-
-The mapping from port name to the GPIO controller that implements that port, and
-the mapping from port name to register offset within a controller, are both
-extremely non-linear. The header file <dt-bindings/gpio/tegra186-gpio.h>
-describes the port-level mapping. In that file, the naming convention for ports
-matches the HW documentation. The values chosen for the names are alphabetically
-sorted within a particular controller. Drivers need to map between the DT GPIO
-IDs and HW register offsets using a lookup table.
-
-Each GPIO controller can generate a number of interrupt signals. Each signal
-represents the aggregate status for all GPIOs within a set of ports. Thus, the
-number of interrupt signals generated by a controller varies as a rough function
-of the number of ports it implements. Note that the HW documentation refers to
-both the overall controller HW module and the sets-of-ports as "controllers".
-
-Each GPIO controller in fact generates multiple interrupts signals for each set
-of ports. Each GPIO may be configured to feed into a specific one of the
-interrupt signals generated by a set-of-ports. The intent is for each generated
-signal to be routed to a different CPU, thus allowing different CPUs to each
-handle subsets of the interrupts within a port. The status of each of these
-per-port-set signals is reported via a separate register. Thus, a driver needs
-to know which status register to observe. This binding currently defines no
-configuration mechanism for this. By default, drivers should use register
-GPIO_${port}_INTERRUPT_STATUS_G1_0. Future revisions to the binding could
-define a property to configure this.
-
-Required properties:
-- compatible
-    Array of strings.
-    One of:
-    - "nvidia,tegra186-gpio".
-    - "nvidia,tegra186-gpio-aon".
-    - "nvidia,tegra194-gpio".
-    - "nvidia,tegra194-gpio-aon".
-- reg-names
-    Array of strings.
-    Contains a list of names for the register spaces described by the reg
-    property. May contain the following entries, in any order:
-    - "gpio": Mandatory. GPIO control registers. This may cover either:
-        a) The single physical alias that this OS should use.
-        b) All physical aliases that exist in the controller. This is
-           appropriate when the OS is responsible for managing assignment of
-           the physical aliases.
-    - "security": Optional. Security configuration registers.
-    Users of this binding MUST look up entries in the reg property by name,
-    using this reg-names property to do so.
-- reg
-    Array of (physical base address, length) tuples.
-    Must contain one entry per entry in the reg-names property, in a matching
-    order.
-- interrupts
-    Array of interrupt specifiers.
-    The interrupt outputs from the HW block, one per set of ports, in the
-    order the HW manual describes them. The number of entries required varies
-    depending on compatible value:
-    - "nvidia,tegra186-gpio": 6 entries.
-    - "nvidia,tegra186-gpio-aon": 1 entry.
-    - "nvidia,tegra194-gpio": 6 entries.
-    - "nvidia,tegra194-gpio-aon": 1 entry.
-- gpio-controller
-    Boolean.
-    Marks the device node as a GPIO controller/provider.
-- #gpio-cells
-    Single-cell integer.
-    Must be <2>.
-    Indicates how many cells are used in a consumer's GPIO specifier.
-    In the specifier:
-    - The first cell is the pin number.
-        See <dt-bindings/gpio/tegra186-gpio.h>.
-    - The second cell contains flags:
-        - Bit 0 specifies polarity
-            - 0: Active-high (normal).
-            - 1: Active-low (inverted).
-- interrupt-controller
-    Boolean.
-    Marks the device node as an interrupt controller/provider.
-- #interrupt-cells
-    Single-cell integer.
-    Must be <2>.
-    Indicates how many cells are used in a consumer's interrupt specifier.
-    In the specifier:
-    - The first cell is the GPIO number.
-        See <dt-bindings/gpio/tegra186-gpio.h>.
-    - The second cell is contains flags:
-        - Bits [3:0] indicate trigger type and level:
-            - 1: Low-to-high edge triggered.
-            - 2: High-to-low edge triggered.
-            - 4: Active high level-sensitive.
-            - 8: Active low level-sensitive.
-            Valid combinations are 1, 2, 3, 4, 8.
-
-Example:
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-gpio@2200000 {
-	compatible = "nvidia,tegra186-gpio";
-	reg-names = "security", "gpio";
-	reg =
-		<0x0 0x2200000 0x0 0x10000>,
-		<0x0 0x2210000 0x0 0x10000>;
-	interrupts =
-		<0 47 IRQ_TYPE_LEVEL_HIGH>,
-		<0 50 IRQ_TYPE_LEVEL_HIGH>,
-		<0 53 IRQ_TYPE_LEVEL_HIGH>,
-		<0 56 IRQ_TYPE_LEVEL_HIGH>,
-		<0 59 IRQ_TYPE_LEVEL_HIGH>,
-		<0 180 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
-
-gpio@c2f0000 {
-	compatible = "nvidia,tegra186-gpio-aon";
-	reg-names = "security", "gpio";
-	reg =
-		<0x0 0xc2f0000 0x0 0x1000>,
-		<0x0 0xc2f1000 0x0 0x1000>;
-	interrupts =
-		<0 60 IRQ_TYPE_LEVEL_HIGH>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
new file mode 100644
index 000000000000..4ef06b2ff1ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nvidia,tegra186-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPIO Controller (Tegra186 and later)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  Tegra186 contains two GPIO controllers; a main controller and an "AON"
+  controller. This binding document applies to both controllers. The register
+  layouts for the controllers share many similarities, but also some
+  significant differences. Hence, this document describes closely related but
+  different bindings and compatible values.
+
+  The Tegra186 GPIO controller allows software to set the IO direction of,
+  and read/write the value of, numerous GPIO signals. Routing of GPIO signals
+  to package balls is under the control of a separate pin controller hardware
+  block. Two major sets of registers exist:
+
+    a) Security registers, which allow configuration of allowed access to the
+       GPIO register set. These registers exist in a single contiguous block
+       of physical address space. The size of this block, and the security
+       features available, varies between the different GPIO controllers.
+
+       Access to this set of registers is not necessary in all circumstances.
+       Code that wishes to configure access to the GPIO registers needs access
+       to these registers to do so. Code which simply wishes to read or write
+       GPIO data does not need access to these registers.
+
+    b) GPIO registers, which allow manipulation of the GPIO signals. In some
+       GPIO controllers, these registers are exposed via multiple "physical
+       aliases" in address space, each of which access the same underlying
+       state. See the hardware documentation for rationale. Any particular
+       GPIO client is expected to access just one of these physical aliases.
+
+    Tegra HW documentation describes a unified naming convention for all GPIOs
+    implemented by the SoC. Each GPIO is assigned to a port, and a port may
+    control a number of GPIOs. Thus, each GPIO is named according to an
+    alphabetical port name and an integer GPIO name within the port. For
+    example, GPIO_PA0, GPIO_PN6, or GPIO_PCC3.
+
+    The number of ports implemented by each GPIO controller varies. The number
+    of implemented GPIOs within each port varies. GPIO registers within a
+    controller are grouped and laid out according to the port they affect.
+
+    The mapping from port name to the GPIO controller that implements that
+    port, and the mapping from port name to register offset within a
+    controller, are both extremely non-linear. The header file
+    <dt-bindings/gpio/tegra186-gpio.h> describes the port-level mapping. In
+    that file, the naming convention for ports matches the HW documentation.
+    The values chosen for the names are alphabetically sorted within a
+    particular controller. Drivers need to map between the DT GPIO IDs and HW
+    register offsets using a lookup table.
+
+    Each GPIO controller can generate a number of interrupt signals. Each
+    signal represents the aggregate status for all GPIOs within a set of
+    ports. Thus, the number of interrupt signals generated by a controller
+    varies as a rough function of the number of ports it implements. Note
+    that the HW documentation refers to both the overall controller HW
+    module and the sets-of-ports as "controllers".
+
+    Each GPIO controller in fact generates multiple interrupts signals for
+    each set of ports. Each GPIO may be configured to feed into a specific
+    one of the interrupt signals generated by a set-of-ports. The intent is
+    for each generated signal to be routed to a different CPU, thus allowing
+    different CPUs to each handle subsets of the interrupts within a port.
+    The status of each of these per-port-set signals is reported via a
+    separate register. Thus, a driver needs to know which status register to
+    observe. This binding currently defines no configuration mechanism for
+    this. By default, drivers should use register
+    GPIO_${port}_INTERRUPT_STATUS_G1_0. Future revisions to the binding could
+    define a property to configure this.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-gpio
+      - nvidia,tegra186-gpio-aon
+      - nvidia,tegra194-gpio
+      - nvidia,tegra194-gpio-aon
+      - nvidia,tegra234-gpio
+      - nvidia,tegra234-gpio-aon
+
+  reg-names:
+    items:
+      - const: security
+      - const: gpio
+    minItems: 1
+
+  reg:
+    items:
+      - description: Security configuration registers.
+      - description: |
+          GPIO control registers. This may cover either:
+
+            a) The single physical alias that this OS should use.
+            b) All physical aliases that exist in the controller. This is
+               appropriate when the OS is responsible for managing assignment
+               of the physical aliases.
+    minItems: 1
+
+  interrupts:
+    description: The interrupt outputs from the HW block, one per set of
+      ports, in the order the HW manual describes them. The number of entries
+      required varies depending on compatible value.
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    description: |
+      Indicates how many cells are used in a consumer's GPIO specifier. In the
+      specifier:
+
+        - The first cell is the pin number.
+          See <dt-bindings/gpio/tegra186-gpio.h>.
+        - The second cell contains flags:
+          - Bit 0 specifies polarity
+            - 0: Active-high (normal).
+            - 1: Active-low (inverted).
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    description: |
+      Indicates how many cells are used in a consumer's interrupt specifier.
+      In the specifier:
+
+        - The first cell is the GPIO number.
+          See <dt-bindings/gpio/tegra186-gpio.h>.
+        - The second cell is contains flags:
+          - Bits [3:0] indicate trigger type and level:
+            - 1: Low-to-high edge triggered.
+            - 2: High-to-low edge triggered.
+            - 4: Active high level-sensitive.
+            - 8: Active low level-sensitive.
+
+            Valid combinations are 1, 2, 3, 4, 8.
+    const: 2
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-gpio
+              - nvidia,tegra194-gpio
+              - nvidia,tegra234-gpio
+    then:
+      properties:
+        interrupts:
+          minItems: 6
+          maxItems: 48
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-gpio-aon
+              - nvidia,tegra194-gpio-aon
+              - nvidia,tegra234-gpio-aon
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 4
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    gpio@2200000 {
+        compatible = "nvidia,tegra186-gpio";
+        reg-names = "security", "gpio";
+        reg = <0x2200000 0x10000>,
+              <0x2210000 0x10000>;
+        interrupts = <0  47 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  50 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  53 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  56 IRQ_TYPE_LEVEL_HIGH>,
+                     <0  59 IRQ_TYPE_LEVEL_HIGH>,
+                     <0 180 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
+
+    gpio@c2f0000 {
+        compatible = "nvidia,tegra186-gpio-aon";
+        reg-names = "security", "gpio";
+        reg = <0xc2f0000 0x1000>,
+              <0xc2f1000 0x1000>;
+        interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt b/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt
deleted file mode 100644
index 023c9526e5f8..000000000000
--- a/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-NVIDIA Tegra GPIO controller
-
-Required properties:
-- compatible : "nvidia,tegra<chip>-gpio"
-- reg : Physical base address and length of the controller's registers.
-- interrupts : The interrupt outputs from the controller. For Tegra20,
-  there should be 7 interrupts specified, and for Tegra30, there should
-  be 8 interrupts specified.
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters:
-  - bit 0 specifies polarity (0 for normal, 1 for inverted)
-- gpio-controller : Marks the device node as a GPIO controller.
-- #interrupt-cells : Should be 2.
-  The first cell is the GPIO number.
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-      Valid combinations are 1, 2, 3, 4, 8.
-- interrupt-controller : Marks the device node as an interrupt controller.
-
-Example:
-
-gpio: gpio@6000d000 {
-	compatible = "nvidia,tegra20-gpio";
-	reg = < 0x6000d000 0x1000 >;
-	interrupts = < 0 32 0x04
-		       0 33 0x04
-		       0 34 0x04
-		       0 35 0x04
-		       0 55 0x04
-		       0 87 0x04
-		       0 89 0x04 >;
-	#gpio-cells = <2>;
-	gpio-controller;
-	#interrupt-cells = <2>;
-	interrupt-controller;
-};
diff --git a/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.yaml b/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.yaml
new file mode 100644
index 000000000000..94b51749ee76
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/nvidia,tegra20-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra GPIO Controller (Tegra20 - Tegra210)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-gpio
+          - nvidia,tegra30-gpio
+
+      - items:
+          - enum:
+              - nvidia,tegra114-gpio
+              - nvidia,tegra124-gpio
+              - nvidia,tegra210-gpio
+          - const: nvidia,tegra30-gpio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: The interrupt outputs from the controller. For Tegra20,
+      there should be 7 interrupts specified, and for Tegra30, there should
+      be 8 interrupts specified.
+
+  "#gpio-cells":
+    description: The first cell is the pin number and the second cell is used
+      to specify the GPIO polarity (0 = active high, 1 = active low).
+    const: 2
+
+  gpio-controller: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  "#interrupt-cells":
+    description: |
+      Should be 2. The first cell is the GPIO number. The second cell is
+      used to specify flags:
+
+        bits[3:0] trigger type and level flags:
+          1 = low-to-high edge triggered.
+          2 = high-to-low edge triggered.
+          4 = active high level-sensitive.
+          8 = active low level-sensitive.
+
+      Valid combinations are 1, 2, 3, 4, 8.
+    const: 2
+
+  interrupt-controller: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra30-gpio
+    then:
+      properties:
+        interrupts:
+          minItems: 8
+          maxItems: 8
+    else:
+      properties:
+        interrupts:
+          minItems: 7
+          maxItems: 7
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#gpio-cells"
+  - gpio-controller
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties:
+  type: object
+  required:
+    - gpio-hog
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    gpio: gpio@6000d000 {
+        compatible = "nvidia,tegra20-gpio";
+        reg = <0x6000d000 0x1000>;
+        interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+        #gpio-cells = <2>;
+        gpio-controller;
+        #interrupt-cells = <2>;
+        interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml b/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
index f0ff66c4c74e..3718103e966a 100644
--- a/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
+++ b/Documentation/devicetree/bindings/gpio/nxp,pcf8575.yaml
@@ -39,6 +39,10 @@ properties:
   reg:
     maxItems: 1
 
+  gpio-line-names:
+    minItems: 1
+    maxItems: 16
+
   gpio-controller: true
 
   '#gpio-cells':
diff --git a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
index 100f20cebd76..39fd959c45d2 100644
--- a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
@@ -28,10 +28,11 @@ properties:
       - enum:
           - realtek,rtl8380-gpio
           - realtek,rtl8390-gpio
+          - realtek,rtl9300-gpio
+          - realtek,rtl9310-gpio
       - const: realtek,otto-gpio
 
-  reg:
-    maxItems: 1
+  reg: true
 
   "#gpio-cells":
     const: 2
@@ -50,6 +51,23 @@ properties:
   interrupts:
     maxItems: 1
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: realtek,rtl9300-gpio
+then:
+  properties:
+    reg:
+      items:
+        - description: GPIO and interrupt control
+        - description: interrupt CPU map
+else:
+  properties:
+    reg:
+      items:
+        - description: GPIO and interrupt control
+
 required:
   - compatible
   - reg
@@ -74,5 +92,17 @@ examples:
         interrupt-parent = <&rtlintc>;
         interrupts = <23>;
       };
+  - |
+      gpio@3300 {
+        compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio";
+        reg = <0x3300 0x1c>, <0x3338 0x8>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        ngpios = <24>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&rtlintc>;
+        interrupts = <13>;
+      };
 
 ...
diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
index f2541739ee3b..aa424e2b95f8 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
@@ -49,7 +49,11 @@ properties:
           - const: renesas,rcar-gen3-gpio # R-Car Gen3 or RZ/G2
 
       - items:
-          - const: renesas,gpio-r8a779a0  # R-Car V3U
+          - enum:
+              - renesas,gpio-r8a779a0     # R-Car V3U
+              - renesas,gpio-r8a779f0     # R-Car S4-8
+              - renesas,gpio-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-gpio # R-Car Gen4
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
index 0d62c28fb58d..affd823c881d 100644
--- a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
+++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
@@ -27,8 +27,12 @@ properties:
       - description: APB interface clock source
       - description: GPIO debounce reference clock source
 
+  gpio-ranges: true
+
   gpio-controller: true
 
+  gpio-line-names: true
+
   "#gpio-cells":
     const: 2
 
diff --git a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
index c2902aac2514..fc095646adea 100644
--- a/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/sifive,gpio.yaml
@@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: SiFive GPIO controller
 
 maintainers:
-  - Yash Shah <yash.shah@sifive.com>
   - Paul Walmsley <paul.walmsley@sifive.com>
 
 properties:
@@ -47,6 +46,10 @@ properties:
     maximum: 32
     default: 16
 
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
   gpio-controller: true
 
 required:
@@ -77,9 +80,10 @@ examples:
       gpio@10060000 {
         compatible = "sifive,fu540-c000-gpio", "sifive,gpio0";
         interrupt-parent = <&plic>;
-        interrupts = <7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22>;
+        interrupts = <7>, <8>, <9>, <10>, <11>, <12>, <13>, <14>, <15>, <16>,
+                     <17>, <18>, <19>, <20>, <21>, <22>;
         reg = <0x10060000 0x1000>;
-        clocks = <&tlclk PRCI_CLK_TLCLK>;
+        clocks = <&tlclk FU540_PRCI_CLK_TLCLK>;
         gpio-controller;
         #gpio-cells = <2>;
         interrupt-controller;
diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
index bcafa494ed7a..228fa27ffdc3 100644
--- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
@@ -52,6 +52,23 @@ properties:
       <child-interrupt-base parent-interrupt-base length> triplets.
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
 
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml b/Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml
new file mode 100644
index 000000000000..99fcf970773a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/sprd,gpio-eic.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/sprd,gpio-eic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc EIC controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+  The EIC is the abbreviation of external interrupt controller, which can
+  be used only in input mode. The Spreadtrum platform has 2 EIC controllers,
+  one is in digital chip, and another one is in PMIC. The digital chip EIC
+  controller contains 4 sub-modules, i.e. EIC-debounce, EIC-latch, EIC-async and
+  EIC-sync. But the PMIC EIC controller contains only one EIC-debounce sub-
+  module.
+
+  The EIC-debounce sub-module provides up to 8 source input signal
+  connections. A debounce mechanism is used to capture the input signals'
+  stable status (millisecond resolution) and a single-trigger mechanism
+  is introduced into this sub-module to enhance the input event detection
+  reliability. In addition, this sub-module's clock can be shut off
+  automatically to reduce power dissipation. Moreover the debounce range
+  is from 1ms to 4s with a step size of 1ms. The input signal will be
+  ignored if it is asserted for less than 1 ms.
+
+  The EIC-latch sub-module is used to latch some special power down signals
+  and generate interrupts, since the EIC-latch does not depend on the APB
+  clock to capture signals.
+
+  The EIC-async sub-module uses a 32kHz clock to capture the short signals
+  (microsecond resolution) to generate interrupts by level or edge trigger.
+
+  The EIC-sync is similar with GPIO's input function, which is a synchronized
+  signal input register. It can generate interrupts by level or edge trigger
+  when detecting input signals.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - sprd,sc9860-eic-debounce
+          - sprd,sc9860-eic-latch
+          - sprd,sc9860-eic-async
+          - sprd,sc9860-eic-sync
+          - sprd,sc2731-eic
+      - items:
+          - enum:
+              - sprd,ums512-eic-debounce
+          - const: sprd,sc9860-eic-debounce
+      - items:
+          - enum:
+              - sprd,ums512-eic-latch
+          - const: sprd,sc9860-eic-latch
+      - items:
+          - enum:
+              - sprd,ums512-eic-async
+          - const: sprd,sc9860-eic-async
+      - items:
+          - enum:
+              - sprd,ums512-eic-sync
+          - const: sprd,sc9860-eic-sync
+      - items:
+          - enum:
+              - sprd,sc2730-eic
+          - const: sprd,sc2731-eic
+
+  reg:
+    minItems: 1
+    maxItems: 3
+    description:
+      EIC controller can support maximum 3 banks which has its own
+      address base.
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+    description:
+      The interrupt shared by all GPIO lines for this controller.
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        eic_debounce: gpio@40210000 {
+            compatible = "sprd,sc9860-eic-debounce";
+            reg = <0 0x40210000 0 0x80>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/sprd,gpio.yaml b/Documentation/devicetree/bindings/gpio/sprd,gpio.yaml
new file mode 100644
index 000000000000..483168838128
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/sprd,gpio.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/sprd,gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc GPIO controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description: |
+  The controller's registers are organized as sets of sixteen 16-bit
+  registers with each set controlling a bank of up to 16 pins. A single
+  interrupt is shared for all of the banks handled by the controller.
+
+properties:
+  compatible:
+    oneOf:
+      - const: sprd,sc9860-gpio
+      - items:
+          - enum:
+              - sprd,ums512-gpio
+          - const: sprd,sc9860-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+    description: The interrupt shared by all GPIO lines for this controller.
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ap_gpio: gpio@40280000 {
+            compatible = "sprd,sc9860-gpio";
+            reg = <0 0x40280000 0 0x1000>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
index 7087e4a5013f..bd721c839059 100644
--- a/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/ti,omap-gpio.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/gpio/ti,omap-gpio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OMAP GPIO controller bindings
+title: OMAP GPIO controller
 
 maintainers:
   - Grygorii Strashko <grygorii.strashko@ti.com>
diff --git a/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
index 9ad470e01953..b085450b527f 100644
--- a/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
+++ b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
@@ -43,7 +43,6 @@ required:
   - gpio-controller
   - interrupt-controller
   - "#interrupt-cells"
-  - interrupt-parent
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
new file mode 100644
index 000000000000..31906c253940
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpio/x-powers,axp209-gpio.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: X-Powers AXP209 GPIO
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+
+properties:
+  "#gpio-cells":
+    const: 2
+    description: >
+      The first cell is the pin number and the second is the GPIO flags.
+
+  compatible:
+    oneOf:
+      - enum:
+          - x-powers,axp209-gpio
+          - x-powers,axp221-gpio
+          - x-powers,axp813-gpio
+      - items:
+          - enum:
+              - x-powers,axp223-gpio
+              - x-powers,axp809-gpio
+          - const: x-powers,axp221-gpio
+      - items:
+          - const: x-powers,axp803-gpio
+          - const: x-powers,axp813-gpio
+
+  gpio-controller: true
+
+patternProperties:
+  "^.*-pins?$":
+    $ref: /schemas/pinctrl/pinmux-node.yaml#
+    additionalProperties: false
+
+    properties:
+      pins:
+        items:
+          enum:
+            - GPIO0
+            - GPIO1
+            - GPIO2
+
+      function:
+        enum:
+          - adc
+          - ldo
+          - gpio_in
+          - gpio_out
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
new file mode 100644
index 000000000000..f333ee2288e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/xlnx,gpio-xilinx.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/xlnx,gpio-xilinx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI GPIO controller
+
+maintainers:
+  - Neeli Srinivas <srinivas.neeli@xilinx.com>
+
+description:
+  The AXI GPIO design provides a general purpose input/output interface
+  to an AXI4-Lite interface. The AXI GPIO can be configured as either
+  a single or a dual-channel device. The width of each channel is
+  independently configurable. The channels can be configured to
+  generate an interrupt when a transition on any of their inputs occurs.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,xps-gpio-1.00.a
+
+  reg:
+    maxItems: 1
+
+  "#gpio-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller: true
+
+  gpio-line-names:
+    description: strings describing the names of each gpio line
+    minItems: 1
+    maxItems: 64
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  clocks:
+    maxItems: 1
+
+  interrupt-names: true
+
+  xlnx,all-inputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel1 bits in input mode.
+
+  xlnx,all-inputs-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel2 bits in input mode.
+
+  xlnx,all-outputs:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel1 bits in output mode.
+
+  xlnx,all-outputs-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This option sets this GPIO channel2 bits in output mode.
+
+  xlnx,dout-default:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sets the default value of all the enabled bits of
+                 channel1.
+    default: 0
+
+  xlnx,dout-default-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Sets the default value of all the enabled bits of
+                 channel2.
+    default: 0
+
+  xlnx,gpio-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The value defines the bit width of the GPIO channel1.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  xlnx,gpio2-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The value defines the bit width of the GPIO channel2.
+    minimum: 1
+    maximum: 32
+    default: 32
+
+  xlnx,interrupt-present:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter enables interrupt control logic
+                 and interrupt registers in GPIO module.
+    minimum: 0
+    maximum: 1
+    default: 0
+
+  xlnx,is-dual:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This parameter enables a second GPIO channel (GPIO2).
+    minimum: 0
+    maximum: 1
+    default: 0
+
+  xlnx,tri-default:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This value configures the input or output mode
+                 of each bit of GPIO channel1.
+
+  xlnx,tri-default-2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: This value configures the input or output mode
+                 of each bit of GPIO channel2.
+
+required:
+  - reg
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        gpio@e000a000 {
+            compatible = "xlnx,xps-gpio-1.00.a";
+            reg = <0xa0020000 0x10000>;
+            #gpio-cells = <2>;
+            #interrupt-cells = <0x2>;
+            clocks = <&zynqmp_clk 71>;
+            gpio-controller;
+            interrupt-controller;
+            interrupt-names = "ip2intc_irpt";
+            interrupt-parent = <&gic>;
+            interrupts = <0 89 4>;
+            xlnx,all-inputs = <0x0>;
+            xlnx,all-inputs-2 = <0x0>;
+            xlnx,all-outputs = <0x0>;
+            xlnx,all-outputs-2 = <0x0>;
+            xlnx,dout-default = <0x0>;
+            xlnx,dout-default-2 = <0x0>;
+            xlnx,gpio-width = <0x20>;
+            xlnx,gpio2-width = <0x20>;
+            xlnx,interrupt-present = <0x1>;
+            xlnx,is-dual = <0x1>;
+            xlnx,tri-default = <0xFFFFFFFF>;
+            xlnx,tri-default-2 = <0xFFFFFFFF>;
+        };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
new file mode 100644
index 000000000000..31c0fc345903
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/xlnx,zynqmp-gpio-modepin.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/gpio/xlnx,zynqmp-gpio-modepin.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ZynqMP Mode Pin GPIO controller
+
+description:
+  PS_MODE is 4-bits boot mode pins sampled on POR deassertion. Mode Pin
+  GPIO controller with configurable from numbers of pins (from 0 to 3 per
+  PS_MODE). Every pin can be configured as input/output.
+
+maintainers:
+  - Piyush Mehta <piyush.mehta@xilinx.com>
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-gpio-modepin
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    zynqmp-firmware {
+        gpio {
+            compatible = "xlnx,zynqmp-gpio-modepin";
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 6f98dd55fb4c..0400a361875d 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -14,32 +14,53 @@ properties:
     pattern: '^gpu@[a-f0-9]+$'
 
   compatible:
-    items:
-      - enum:
-          - amlogic,meson-g12a-mali
-          - mediatek,mt8183-mali
-          - realtek,rtd1619-mali
-          - rockchip,px30-mali
-          - rockchip,rk3568-mali
-      - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson-g12a-mali
+              - mediatek,mt8183-mali
+              - mediatek,mt8183b-mali
+              - mediatek,mt8186-mali
+              - realtek,rtd1619-mali
+              - renesas,r9a07g044-mali
+              - renesas,r9a07g054-mali
+              - rockchip,px30-mali
+              - rockchip,rk3568-mali
+          - const: arm,mali-bifrost # Mali Bifrost GPU model/revision is fully discoverable
+      - items:
+          - enum:
+              - mediatek,mt8195-mali
+          - const: mediatek,mt8192-mali
+          - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable
+      - items:
+          - enum:
+              - mediatek,mt8192-mali
+          - const: arm,mali-valhall-jm # Mali Valhall GPU model/revision is fully discoverable
 
   reg:
     maxItems: 1
 
   interrupts:
+    minItems: 3
     items:
       - description: Job interrupt
       - description: MMU interrupt
       - description: GPU interrupt
+      - description: Event interrupt
 
   interrupt-names:
+    minItems: 3
     items:
       - const: job
       - const: mmu
       - const: gpu
+      - const: event
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  clock-names: true
 
   mali-supply: true
 
@@ -49,10 +70,17 @@ properties:
 
   power-domains:
     minItems: 1
-    maxItems: 3
+    maxItems: 5
+
+  power-domain-names:
+    minItems: 2
+    maxItems: 5
 
   resets:
-    maxItems: 2
+    minItems: 1
+    maxItems: 3
+
+  reset-names: true
 
   "#cooling-cells":
     const: 2
@@ -76,6 +104,13 @@ properties:
 
   dma-coherent: true
 
+  nvmem-cell-names:
+    items:
+      - const: speed-bin
+
+  nvmem-cells:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -92,8 +127,47 @@ allOf:
           contains:
             const: amlogic,meson-g12a-mali
     then:
+      properties:
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+      required:
+        - resets
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g044-mali
+              - renesas,r9a07g054-mali
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+        interrupt-names:
+          minItems: 4
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: gpu
+            - const: bus
+            - const: bus_ace
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: rst
+            - const: axi_rst
+            - const: ace_rst
       required:
+        - clock-names
+        - power-domains
         - resets
+        - reset-names
   - if:
       properties:
         compatible:
@@ -103,6 +177,7 @@ allOf:
       properties:
         power-domains:
           minItems: 3
+          maxItems: 3
         power-domain-names:
           items:
             - const: core0
@@ -115,9 +190,79 @@ allOf:
         - power-domain-names
     else:
       properties:
+        sram-supply: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8183b-mali
+    then:
+      properties:
+        power-domains:
+          minItems: 3
+          maxItems: 3
+        power-domain-names:
+          items:
+            - const: core0
+            - const: core1
+            - const: core2
+      required:
+        - power-domains
+        - power-domain-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8186-mali
+    then:
+      properties:
+        power-domains:
+          minItems: 2
+          maxItems: 2
+        power-domain-names:
+          items:
+            - const: core0
+            - const: core1
+      required:
+        - power-domains
+        - power-domain-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8192-mali
+    then:
+      properties:
+        power-domains:
+          minItems: 5
+        power-domain-names:
+          items:
+            - const: core0
+            - const: core1
+            - const: core2
+            - const: core3
+            - const: core4
+      required:
+        - power-domains
+        - power-domain-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-mali
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: gpu
+            - const: bus
         power-domains:
           maxItems: 1
-        sram-supply: false
+        power-domain-names: false
+      required:
+        - clock-names
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index d209f272625d..2a25384ca3ef 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -74,7 +74,8 @@ properties:
       - const: bus
 
   mali-supply: true
-  opp-table: true
+  opp-table:
+    type: object
 
   power-domains:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index eceaa176bd57..318122d95eb5 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -101,7 +101,8 @@ properties:
 
   mali-supply: true
 
-  opp-table: true
+  opp-table:
+    type: object
 
   power-domains:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
index e6485f7b046f..dae55b8a267b 100644
--- a/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
+++ b/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/gpu/brcm,bcm-v3d.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom V3D GPU Bindings
+title: Broadcom V3D GPU
 
 maintainers:
   - Eric Anholt <eric@anholt.net>
@@ -16,6 +16,7 @@ properties:
 
   compatible:
     enum:
+      - brcm,2711-v3d
       - brcm,7268-v3d
       - brcm,7278-v3d
 
diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml
new file mode 100644
index 000000000000..ba4c6473ff92
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra NVDEC
+
+description: |
+  NVDEC is the hardware video decoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically
+  programmed through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvdec@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-nvdec
+      - nvidia,tegra186-nvdec
+      - nvidia,tegra194-nvdec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nvdec
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    items:
+      - description: DMA read memory client
+      - description: DMA read 2 memory client
+      - description: DMA write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: read-1
+      - const: write
+
+  nvidia,host1x-class:
+    description: |
+      Host1x class of the engine, used to specify the targeted engine
+      when programming the engine through Host1x channels or when
+      configuring engine-specific behavior in Host1x.
+    default: 0xf0
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    nvdec@15480000 {
+            compatible = "nvidia,tegra186-nvdec";
+            reg = <0x15480000 0x40000>;
+            clocks = <&bpmp TEGRA186_CLK_NVDEC>;
+            clock-names = "nvdec";
+            resets = <&bpmp TEGRA186_RESET_NVDEC>;
+            reset-names = "nvdec";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVDEC>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD1 &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVDECSWR &emc>;
+            interconnect-names = "dma-mem", "read-1", "write";
+            iommus = <&smmu TEGRA186_SID_NVDEC>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml
new file mode 100644
index 000000000000..c23dae713eb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvenc.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvenc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra NVENC
+
+description: |
+  NVENC is the hardware video encoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically
+  programmed through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvenc@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-nvenc
+      - nvidia,tegra186-nvenc
+      - nvidia,tegra194-nvenc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nvenc
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvenc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    minItems: 2
+    maxItems: 3
+
+  interconnect-names:
+    minItems: 2
+    maxItems: 3
+
+  nvidia,host1x-class:
+    description: |
+      Host1x class of the engine, used to specify the targeted engine
+      when programming the engine through Host1x channels or when
+      configuring engine-specific behavior in Host1x.
+    default: 0x21
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nvidia,tegra210-nvenc
+            - nvidia,tegra186-nvenc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: DMA read memory client
+            - description: DMA write memory client
+        interconnect-names:
+          items:
+            - const: dma-mem
+            - const: write
+  - if:
+      properties:
+        compatible:
+          enum:
+            - nvidia,tegra194-nvenc
+    then:
+      properties:
+        interconnects:
+          items:
+            - description: DMA read memory client
+            - description: DMA read 2 memory client
+            - description: DMA write memory client
+        interconnect-names:
+          items:
+            - const: dma-mem
+            - const: read-1
+            - const: write
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    nvenc@154c0000 {
+            compatible = "nvidia,tegra186-nvenc";
+            reg = <0x154c0000 0x40000>;
+            clocks = <&bpmp TEGRA186_CLK_NVENC>;
+            clock-names = "nvenc";
+            resets = <&bpmp TEGRA186_RESET_NVENC>;
+            reset-names = "nvenc";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_MPE>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVENCSRD &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVENCSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu TEGRA186_SID_NVENC>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml
new file mode 100644
index 000000000000..99a33a5eac3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvjpg.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvjpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra NVJPG
+
+description: |
+  NVJPG is the hardware JPEG decoder and encoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically programmed
+  through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvjpg@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra210-nvjpg
+      - nvidia,tegra186-nvjpg
+      - nvidia,tegra194-nvjpg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: nvjpg
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvjpg
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    items:
+      - description: DMA read memory client
+      - description: DMA write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra186-clock.h>
+    #include <dt-bindings/memory/tegra186-mc.h>
+    #include <dt-bindings/power/tegra186-powergate.h>
+    #include <dt-bindings/reset/tegra186-reset.h>
+
+    nvjpg@15380000 {
+            compatible = "nvidia,tegra186-nvjpg";
+            reg = <0x15380000 0x40000>;
+            clocks = <&bpmp TEGRA186_CLK_NVJPG>;
+            clock-names = "nvjpg";
+            resets = <&bpmp TEGRA186_RESET_NVJPG>;
+            reset-names = "nvjpg";
+
+            power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVJPG>;
+            interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVJPGSRD &emc>,
+                            <&mc TEGRA186_MEMORY_CLIENT_NVJPGSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu TEGRA186_SID_NVJPG>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml
new file mode 100644
index 000000000000..0b7561c8b9bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra234-nvdec.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpu/host1x/nvidia,tegra234-nvdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 NVDEC
+
+description: |
+  NVDEC is the hardware video decoder present on NVIDIA Tegra210
+  and newer chips. It is located on the Host1x bus and typically
+  programmed through Host1x channels.
+
+maintainers:
+  - Thierry Reding <treding@gmail.com>
+  - Mikko Perttunen <mperttunen@nvidia.com>
+
+properties:
+  $nodename:
+    pattern: "^nvdec@[0-9a-f]*$"
+
+  compatible:
+    enum:
+      - nvidia,tegra234-nvdec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: nvdec
+      - const: fuse
+      - const: tsec_pka
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: nvdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent: true
+
+  interconnects:
+    items:
+      - description: DMA read memory client
+      - description: DMA write memory client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+  nvidia,memory-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle to the memory controller for determining information for the NVDEC
+      firmware secure carveout. This carveout is configured by the bootloader and
+      not accessible to CPU.
+
+  nvidia,bl-manifest-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to bootloader manifest from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,bl-code-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to bootloader code section from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,bl-data-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to bootloader data section from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,os-manifest-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to operating system manifest from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,os-code-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to operating system code section from beginning of firmware that was configured by
+      the bootloader.
+
+  nvidia,os-data-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Offset to operating system data section from beginning of firmware that was configured
+      by the bootloader.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - nvidia,memory-controller
+  - nvidia,bl-manifest-offset
+  - nvidia,bl-code-offset
+  - nvidia,bl-data-offset
+  - nvidia,os-manifest-offset
+  - nvidia,os-code-offset
+  - nvidia,os-data-offset
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/memory/tegra234-mc.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    nvdec@15480000 {
+            compatible = "nvidia,tegra234-nvdec";
+            reg = <0x15480000 0x00040000>;
+            clocks = <&bpmp TEGRA234_CLK_NVDEC>,
+                     <&bpmp TEGRA234_CLK_FUSE>,
+                     <&bpmp TEGRA234_CLK_TSEC_PKA>;
+            clock-names = "nvdec", "fuse", "tsec_pka";
+            resets = <&bpmp TEGRA234_RESET_NVDEC>;
+            reset-names = "nvdec";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_NVDEC>;
+            interconnects = <&mc TEGRA234_MEMORY_CLIENT_NVDECSRD &emc>,
+                            <&mc TEGRA234_MEMORY_CLIENT_NVDECSWR &emc>;
+            interconnect-names = "dma-mem", "write";
+            iommus = <&smmu_niso1 TEGRA234_SID_NVDEC>;
+            dma-coherent;
+
+            nvidia,memory-controller = <&mc>;
+
+            /* Placeholder values, to be replaced with values from overlay */
+            nvidia,bl-manifest-offset = <0>;
+            nvidia,bl-data-offset = <0>;
+            nvidia,bl-code-offset = <0>;
+            nvidia,os-manifest-offset = <0>;
+            nvidia,os-data-offset = <0>;
+            nvidia,os-code-offset = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
index 62486f55177d..d60626ffb28e 100644
--- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
+++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
@@ -53,4 +53,3 @@ examples:
         clocks = <&clock 278>;
         clock-names = "rotator";
     };
-
diff --git a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
index 93e7244cdc0e..b1b10ea70ad9 100644
--- a/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
+++ b/Documentation/devicetree/bindings/gpu/vivante,gc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/gpu/vivante,gc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Vivante GPU Bindings
+title: Vivante GPU
 
 description: Vivante GPU core devices
 
diff --git a/Documentation/devicetree/bindings/h8300/cpu.txt b/Documentation/devicetree/bindings/h8300/cpu.txt
deleted file mode 100644
index 70cd58608f4b..000000000000
--- a/Documentation/devicetree/bindings/h8300/cpu.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* H8/300 CPU bindings
-
-Required properties:
-
-- compatible: Compatible property value should be "renesas,h8300".
-- clock-frequency: Contains the clock frequency for CPU, in Hz.
-
-Example:
-
-		cpu@0 {
-			compatible = "renesas,h8300";
-			clock-frequency = <20000000>;
-		};
diff --git a/Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml
new file mode 100644
index 000000000000..9d0c36ec1982
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/loongson,ls2k-chipid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 SoC ChipID
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+description: |
+  Loongson-2 SoC contains many groups of global utilities register
+  blocks, of which the ChipID group registers record SoC version,
+  feature, vendor and id information.
+
+properties:
+  compatible:
+    const: loongson,ls2k-chipid
+
+  reg:
+    maxItems: 1
+
+  little-endian: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid: chipid@1fe00000 {
+        compatible = "loongson,ls2k-chipid";
+        reg = <0x1fe00000 0x3ffc>;
+        little-endian;
+    };
diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml
index 1f80767da38b..792f371cec03 100644
--- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml
+++ b/Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml
@@ -1,7 +1,7 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/arm/renesas,prr.yaml#
+$id: http://devicetree.org/schemas/hwinfo/renesas,prr.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas Product Register
diff --git a/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml
new file mode 100644
index 000000000000..95cbdcb56efe
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/samsung,exynos-chipid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC series Chipid driver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-chipid
+      - samsung,exynos850-chipid
+
+  reg:
+    maxItems: 1
+
+  samsung,asv-bin:
+    description:
+      Adaptive Supply Voltage bin selection. This can be used
+      to determine the ASV bin of an SoC if respective information
+      is missing in the CHIPID registers or in the OTP memory.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@10000000 {
+        compatible = "samsung,exynos4210-chipid";
+        reg = <0x10000000 0x100>;
+        samsung,asv-bin = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/hwinfo/samsung,s5pv210-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/samsung,s5pv210-chipid.yaml
new file mode 100644
index 000000000000..563ded4fca83
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/samsung,s5pv210-chipid.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/samsung,s5pv210-chipid.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 SoC ChipID
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: samsung,s5pv210-chipid
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@e0000000 {
+        compatible = "samsung,s5pv210-chipid";
+        reg = <0xe0000000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml b/Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
new file mode 100644
index 000000000000..dada28b47ea0
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwinfo/ti,k3-socinfo.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Multicore SoC platforms chipid module
+
+maintainers:
+  - Tero Kristo <t-kristo@ti.com>
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  Texas Instruments (ARM64) K3 Multicore SoC platforms chipid module is
+  represented by CTRLMMR_xxx_JTAGID register which contains information about
+  SoC id and revision.
+
+properties:
+  $nodename:
+    pattern: "^chipid@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - const: ti,am654-chipid
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    chipid@43000014 {
+        compatible = "ti,am654-chipid";
+        reg = <0x43000014 0x4>;
+    };
diff --git a/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
index 10e5a53e447b..38478dad8b25 100644
--- a/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
+++ b/Documentation/devicetree/bindings/hwlock/allwinner,sun6i-a31-hwspinlock.yaml
@@ -26,11 +26,15 @@ properties:
   resets:
     maxItems: 1
 
+  '#hwlock-cells':
+    const: 1
+
 required:
   - compatible
   - reg
   - clocks
   - resets
+  - "#hwlock-cells"
 
 additionalProperties: false
 
@@ -44,5 +48,6 @@ examples:
         reg = <0x01c18000 0x1000>;
         clocks = <&ccu CLK_BUS_SPINLOCK>;
         resets = <&ccu RST_BUS_SPINLOCK>;
+        #hwlock-cells = <1>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
index 1c7149f7d171..ee2726149cf3 100644
--- a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
+++ b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.yaml
@@ -15,9 +15,22 @@ description:
 
 properties:
   compatible:
-    enum:
-      - qcom,sfpb-mutex
-      - qcom,tcsr-mutex
+    oneOf:
+      - enum:
+          - qcom,sfpb-mutex
+          - qcom,tcsr-mutex
+      - items:
+          - enum:
+              - qcom,apq8084-tcsr-mutex
+              - qcom,ipq6018-tcsr-mutex
+              - qcom,msm8226-tcsr-mutex
+              - qcom,msm8994-tcsr-mutex
+          - const: qcom,tcsr-mutex
+      - items:
+          - enum:
+              - qcom,msm8974-tcsr-mutex
+          - const: qcom,tcsr-mutex
+          - const: syscon
 
   reg:
     maxItems: 1
@@ -34,9 +47,9 @@ additionalProperties: false
 
 examples:
   - |
-        tcsr_mutex: hwlock@1f40000 {
-                compatible = "qcom,tcsr-mutex";
-                reg = <0x01f40000 0x40000>;
-                #hwlock-cells = <1>;
-        };
+    hwlock@1f40000 {
+        compatible = "qcom,tcsr-mutex";
+        reg = <0x01f40000 0x40000>;
+        #hwlock-cells = <1>;
+    };
 ...
diff --git a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml
index 47cf9c8d97e9..829d1fdf4c67 100644
--- a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml
+++ b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.yaml
@@ -4,11 +4,10 @@
 $id: http://devicetree.org/schemas/hwlock/st,stm32-hwspinlock.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Hardware Spinlock bindings
+title: STMicroelectronics STM32 Hardware Spinlock
 
 maintainers:
-  - Benjamin Gaignard <benjamin.gaignard@st.com>
-  - Fabien Dessenne <fabien.dessenne@st.com>
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
 
 properties:
   "#hwlock-cells":
diff --git a/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
index ae1b37dbee75..0a955c7b9706 100644
--- a/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
+++ b/Documentation/devicetree/bindings/hwlock/ti,omap-hwspinlock.yaml
@@ -39,39 +39,8 @@ additionalProperties: false
 examples:
 
   - |
-    /* OMAP4 SoCs */
-    hwspinlock: spinlock@4a0f6000 {
+    spinlock@4a0f6000 {
         compatible = "ti,omap4-hwspinlock";
         reg = <0x4a0f6000 0x1000>;
         #hwlock-cells = <1>;
     };
-
-  - |
-    / {
-        /* K3 AM65x SoCs */
-        model = "Texas Instruments K3 AM654 SoC";
-        compatible = "ti,am654-evm", "ti,am654";
-        #address-cells = <2>;
-        #size-cells = <2>;
-
-        bus@100000 {
-            compatible = "simple-bus";
-            #address-cells = <2>;
-            #size-cells = <2>;
-            ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
-                     <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>; /* Main NavSS */
-
-            bus@30800000 {
-                compatible = "simple-mfd";
-                #address-cells = <2>;
-                #size-cells = <2>;
-                ranges = <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>;
-
-                spinlock@30e00000 {
-                    compatible = "ti,am654-hwspinlock";
-                    reg = <0x00 0x30e00000 0x00 0x1000>;
-                    #hwlock-cells = <1>;
-                };
-            };
-        };
-    };
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
index 154bee851139..ca2b47320689 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
@@ -8,7 +8,6 @@ title: Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Beniamin Bia <beniamin.bia@analog.com>
 
 description: |
   Analog Devices ADM1177 Hot Swap Controller and Digital Power Monitor
@@ -53,16 +52,16 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         pwmon@5a {
-                compatible = "adi,adm1177";
-                reg = <0x5a>;
-                shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
-                adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
-                adi,vrange-high-enable;
+            compatible = "adi,adm1177";
+            reg = <0x5a>;
+            shunt-resistor-micro-ohms = <50000>; /* 50 mOhm */
+            adi,shutdown-threshold-microamp = <1059000>; /* 1.059 A */
+            adi,vrange-high-enable;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
index 43b4f4f57b49..4f8e11bd5142 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1266.yaml
@@ -39,13 +39,13 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         adm1266@40 {
-                compatible = "adi,adm1266";
-                reg = <0x40>;
+            compatible = "adi,adm1266";
+            reg = <0x40>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
index 223393d7cafd..ab87f51c5aef 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml
@@ -37,6 +37,72 @@ properties:
     description:
       Shunt resistor value in micro-Ohm.
 
+  adi,volt-curr-sample-average:
+    description: |
+      Number of samples to be used to report voltage and current values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16, 32, 64, 128]
+
+  adi,power-sample-average:
+    description: |
+      Number of samples to be used to report power values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8, 16, 32, 64, 128]
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1075
+              - adi,adm1276
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 128
+        adi,power-sample-average: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1275
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 16
+        adi,power-sample-average: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1272
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 128
+        adi,power-sample-average:
+          default: 128
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1278
+              - adi,adm1293
+              - adi,adm1294
+    then:
+      properties:
+        adi,volt-curr-sample-average:
+          default: 128
+        adi,power-sample-average:
+          default: 1
+
 required:
   - compatible
   - reg
@@ -53,5 +119,7 @@ examples:
             compatible = "adi,adm1272";
             reg = <0x10>;
             shunt-resistor-micro-ohms = <500>;
+            adi,volt-curr-sample-average = <128>;
+            adi,power-sample-average = <128>;
         };
     };
diff --git a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
index 6747b870f297..0cf3ed6212a6 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices AXI FAN Control Device Tree Bindings
+title: Analog Devices AXI FAN Control
 
 maintainers:
   - Nuno Sá <nuno.sa@analog.com>
@@ -49,15 +49,15 @@ additionalProperties: false
 examples:
   - |
     fpga_axi: fpga-axi {
-            #address-cells = <0x2>;
-            #size-cells = <0x1>;
-
-            axi_fan_control: axi-fan-control@80000000 {
-                    compatible = "adi,axi-fan-control-1.00.a";
-                    reg = <0x0 0x80000000 0x10000>;
-                    clocks = <&clk 71>;
-                    interrupts = <0 110 0>;
-                    pulses-per-revolution = <2>;
-            };
+        #address-cells = <0x2>;
+        #size-cells = <0x1>;
+
+        axi_fan_control: axi-fan-control@80000000 {
+            compatible = "adi,axi-fan-control-1.00.a";
+            reg = <0x0 0x80000000 0x10000>;
+            clocks = <&clk 71>;
+            interrupts = <0 110 0>;
+            pulses-per-revolution = <2>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
new file mode 100644
index 000000000000..5cb66e97e816
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,ltc2945.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2945 wide range i2c power monitor
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  Analog Devices LTC2945 wide range i2c power monitor over I2C.
+
+  https://www.analog.com/media/en/technical-documentation/data-sheets/LTC2945.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2945
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt resistor value in micro-Ohms
+    default: 1000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-monitor@6e {
+            compatible = "adi,ltc2945";
+            reg = <0x6e>;
+            /* 10 milli-Ohm shunt resistor */
+            shunt-resistor-micro-ohms = <10000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
index bf04151b63d2..152935334c76 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
@@ -87,15 +87,15 @@ additionalProperties: false
 examples:
   - |
     spi {
-           #address-cells = <1>;
-           #size-cells = <0>;
-
-           ltc2947_spi: ltc2947@0 {
-                   compatible = "adi,ltc2947";
-                   reg = <0>;
-                   /* accumulation takes place always for energ1/charge1. */
-                   /* accumulation only on positive current for energy2/charge2. */
-                   adi,accumulator-ctl-pol = <0 1>;
-           };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ltc2947_spi: ltc2947@0 {
+            compatible = "adi,ltc2947";
+            reg = <0>;
+            /* accumulation takes place always for energ1/charge1. */
+            /* accumulation only on positive current for energy2/charge2. */
+            adi,accumulator-ctl-pol = <0 1>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
index 64a8fcb7bc46..b39c632956e8 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml
@@ -32,6 +32,7 @@ properties:
 patternProperties:
   "^channel@([0-1])$":
     type: object
+    additionalProperties: false
     description: |
       Represents the two supplies to be monitored.
 
@@ -55,26 +56,26 @@ additionalProperties: false
 
 examples:
   - |
-    i2c1 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
-        ltc2992@6F {
-                #address-cells = <1>;
-                #size-cells = <0>;
+        ltc2992@6f {
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-                compatible = "adi,ltc2992";
-                reg = <0x6F>;
+            compatible = "adi,ltc2992";
+            reg = <0x6f>;
 
-                channel@0 {
-                        reg = <0x0>;
-                        shunt-resistor-micro-ohms = <10000>;
-                };
+            channel@0 {
+                reg = <0x0>;
+                shunt-resistor-micro-ohms = <10000>;
+            };
 
-                channel@1 {
-                        reg = <0x1>;
-                        shunt-resistor-micro-ohms = <10000>;
-                };
+            channel@1 {
+                reg = <0x1>;
+                shunt-resistor-micro-ohms = <10000>;
+            };
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml
new file mode 100644
index 000000000000..9f2d08d7b978
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adi,max31760.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,max31760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX31760 Fan-Speed Controller
+
+maintainers:
+  - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+
+description: |
+  Analog Devices MAX31760 Fan-Speed Controller
+  https://datasheets.maximintegrated.com/en/ds/MAX31760.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,max31760
+
+  reg:
+    description: I2C address of slave device.
+    minimum: 0x50
+    maximum: 0x57
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fan-controller@50 {
+            reg = <0x50>;
+            compatible = "adi,max31760";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index 7d9c083632b9..051c976ab711 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -57,10 +57,30 @@ patternProperties:
       Configures bypassing the individual voltage input attenuator. If
       set to 1 the attenuator is bypassed if set to 0 the attenuator is
       not bypassed. If the property is absent then the attenuator
-      retains it's configuration from the bios/bootloader.
+      retains its configuration from the bios/bootloader.
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
+  "^adi,pin(5|10)-function$":
+    description: |
+      Configures the function for pin 5 on the adi,adt7473 and adi,adt7475. Or
+      pin 10 on the adi,adt7476 and adi,adt7490.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - pwm2
+      - smbalert#
+
+  "^adi,pin(9|14)-function$":
+    description: |
+      Configures the function for pin 9 on the adi,adt7473 and adi,adt7475. Or
+      pin 14 on the adi,adt7476 and adi,adt7490
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - tach4
+      - therm#
+      - smbalert#
+      - gpio
+
 required:
   - compatible
   - reg
@@ -79,6 +99,7 @@ examples:
         adi,bypass-attenuator-in0 = <1>;
         adi,bypass-attenuator-in1 = <0>;
         adi,pwm-active-state = <1 0 1>;
+        adi,pin10-function = "smbalert#";
+        adi,pin14-function = "tach4";
       };
     };
-
diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
index 7598b083979c..353d81d89bf5 100644
--- a/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
+++ b/Documentation/devicetree/bindings/hwmon/amd,sbrmi.yaml
@@ -41,13 +41,13 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         sbrmi@3c {
-                compatible = "amd,sbrmi";
-                reg = <0x3c>;
+            compatible = "amd,sbrmi";
+            reg = <0x3c>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
index 446b09f1ce94..75088244a274 100644
--- a/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
+++ b/Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml
@@ -42,13 +42,13 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         sbtsi@4c {
-                compatible = "amd,sbtsi";
-                reg = <0x4c>;
+            compatible = "amd,sbtsi";
+            reg = <0x4c>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/hwmon/dps650ab.txt b/Documentation/devicetree/bindings/hwmon/dps650ab.txt
deleted file mode 100644
index 76780e795899..000000000000
--- a/Documentation/devicetree/bindings/hwmon/dps650ab.txt
+++ /dev/null
@@ -1,11 +0,0 @@
-Bindings for Delta Electronics DPS-650-AB power supply
-
-Required properties:
-- compatible : "delta,dps650ab"
-- reg        : I2C address, one of 0x58, 0x59.
-
-Example:
-	dps650ab@58 {
-		    compatible = "delta,dps650ab";
-		    reg = <0x58>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/hih6130.txt b/Documentation/devicetree/bindings/hwmon/hih6130.txt
deleted file mode 100644
index 2c43837af4c2..000000000000
--- a/Documentation/devicetree/bindings/hwmon/hih6130.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Honeywell Humidicon HIH-6130 humidity/temperature sensor
---------------------------------------------------------
-
-Requires node properties:
-- compatible : "honeywell,hi6130"
-- reg : the I2C address of the device. This is 0x27.
-
-Example:
-	hih6130@27 {
-		compatible = "honeywell,hih6130";
-		reg = <0x27>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/hpe,gxp-fan-ctrl.yaml b/Documentation/devicetree/bindings/hwmon/hpe,gxp-fan-ctrl.yaml
new file mode 100644
index 000000000000..4a52aac6be72
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/hpe,gxp-fan-ctrl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/hpe,gxp-fan-ctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP Fan Controller
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+
+description: |
+  The HPE GXP fan controller controls the fans through an external CPLD
+  device that connects to the fans.
+
+properties:
+  compatible:
+    const: hpe,gxp-fan-ctrl
+
+  reg:
+    items:
+      - description: Fan controller PWM
+      - description: Programmable logic
+      - description: Function 2
+
+  reg-names:
+    items:
+      - const: base
+      - const: pl
+      - const: fn2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    fan-controller@1000c00 {
+      compatible = "hpe,gxp-fan-ctrl";
+      reg = <0x1000c00 0x200>, <0xd1000000 0xff>, <0x80200000 0x100000>;
+      reg-names = "base", "pl", "fn2";
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt b/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
deleted file mode 100644
index d9a2719f9243..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ibm,cffps1.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Device-tree bindings for IBM Common Form Factor Power Supply Versions 1 and 2
------------------------------------------------------------------------------
-
-Required properties:
- - compatible				: Must be one of the following:
-						"ibm,cffps1"
-						"ibm,cffps2"
-						or "ibm,cffps" if the system
-						must support any version of the
-						power supply
- - reg = < I2C bus address >;		: Address of the power supply on the
-					  I2C bus.
-
-Example:
-
-    i2c-bus@100 {
-        #address-cells = <1>;
-        #size-cells = <0>;
-        #interrupt-cells = <1>;
-        < more properties >
-
-        power-supply@68 {
-            compatible = "ibm,cffps1";
-            reg = <0x68>;
-        };
-    };
diff --git a/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml
new file mode 100644
index 000000000000..3dbdc5af2804
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ibm,occ-hwmon.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ibm,occ-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM On-Chip Controller (OCC) accessed from a service processor
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+description: |
+  The POWER processor On-Chip Controller (OCC) helps manage power and
+  thermals for the system. A service processor or baseboard management
+  controller can query the OCC for it's power and thermal data to report
+  through hwmon.
+
+properties:
+  compatible:
+    enum:
+      - ibm,p9-occ-hwmon
+      - ibm,p10-occ-hwmon
+
+  ibm,no-poll-on-init:
+    description: This property describes whether or not the OCC should
+      be polled during driver initialization.
+    type: boolean
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    hwmon {
+        compatible = "ibm,p10-occ-hwmon";
+        ibm,no-poll-on-init;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt b/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt
index 5dc5d2e2573d..5dc5d2e2573d 100644
--- a/Documentation/devicetree/bindings/i2c/ibm,p8-occ-hwmon.txt
+++ b/Documentation/devicetree/bindings/hwmon/ibm,p8-occ-hwmon.txt
diff --git a/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
new file mode 100644
index 000000000000..c54b5986b365
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/hwmon/iio-hwmon.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ADC-attached Hardware Sensor
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: >
+  Bindings for hardware monitoring devices connected to ADC controllers
+  supporting the Industrial I/O bindings.
+
+properties:
+  compatible:
+    const: iio-hwmon
+
+  io-channels:
+    minItems: 1
+    maxItems: 8 # Should be enough
+    description: >
+      List of phandles to ADC channels to read the monitoring values
+
+required:
+  - compatible
+  - io-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    iio-hwmon {
+        compatible = "iio-hwmon";
+        io-channels = <&adc 1>, <&adc 2>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/jc42.txt b/Documentation/devicetree/bindings/hwmon/jc42.txt
deleted file mode 100644
index f569db58f64a..000000000000
--- a/Documentation/devicetree/bindings/hwmon/jc42.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Properties for Jedec JC-42.4 compatible temperature sensors
-
-Required properties:
-- compatible: May include a device-specific string consisting of the
-	      manufacturer and the name of the chip. A list of supported
-	      chip names follows.
-	      Must include "jedec,jc-42.4-temp" for any Jedec JC-42.4
-	      compatible temperature sensor.
-
-	      Supported chip names:
-		adi,adt7408
-		atmel,at30ts00
-		atmel,at30tse004
-		onnn,cat6095
-		onnn,cat34ts02
-		maxim,max6604
-		microchip,mcp9804
-		microchip,mcp9805
-		microchip,mcp9808
-		microchip,mcp98243
-		microchip,mcp98244
-		microchip,mcp9843
-		nxp,se97
-		nxp,se98
-		st,stts2002
-		st,stts2004
-		st,stts3000
-		st,stts424
-		st,stts424e
-		idt,tse2002
-		idt,tse2004
-		idt,ts3000
-		idt,ts3001
-
-- reg: I2C address
-
-Optional properties:
-- smbus-timeout-disable: When set, the smbus timeout function will be disabled.
-			 This is not supported on all chips.
-
-Example:
-
-temp-sensor@1a {
-	compatible = "jedec,jc-42.4-temp";
-	reg = <0x1a>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
new file mode 100644
index 000000000000..0e49b3901161
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/jedec,jc42.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/jedec,jc42.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Jedec JC-42.4 compatible temperature sensors
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+select:
+  properties:
+    compatible:
+      const: jedec,jc-42.4-temp
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - const: jedec,jc-42.4-temp
+      - items:
+          - enum:
+              - adi,adt7408
+              - atmel,at30ts00
+              - atmel,at30tse004
+              - idt,tse2002
+              - idt,tse2004
+              - idt,ts3000
+              - idt,ts3001
+              - maxim,max6604
+              - microchip,mcp9804
+              - microchip,mcp9805
+              - microchip,mcp9808
+              - microchip,mcp98243
+              - microchip,mcp98244
+              - microchip,mcp9843
+              - nxp,se97
+              - nxp,se97b
+              - nxp,se98
+              - onnn,cat6095
+              - onnn,cat34ts02
+              - st,stts2002
+              - st,stts2004
+              - st,stts3000
+              - st,stts424
+              - st,stts424e
+          - const: jedec,jc-42.4-temp
+
+  reg:
+    maxItems: 1
+
+  smbus-timeout-disable:
+    description: |
+      When set, the smbus timeout function will be disabled. This is not
+      supported on all chips.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temp-sensor@1a {
+            compatible = "jedec,jc-42.4-temp";
+            reg = <0x1a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
new file mode 100644
index 000000000000..b1a4c235376e
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4151.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lltc,ltc4151.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTC4151 High Voltage I2C Current and Voltage Monitor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: lltc,ltc4151
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt resistor value in micro-Ohms
+    default: 1000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@6e {
+            compatible = "lltc,ltc4151";
+            reg = <0x6e>;
+            shunt-resistor-micro-ohms = <1500>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/lm70.txt b/Documentation/devicetree/bindings/hwmon/lm70.txt
deleted file mode 100644
index ea417a0d32af..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm70.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* LM70/TMP121/LM71/LM74 thermometer.
-
-Required properties:
-- compatible: one of
-		"ti,lm70"
-		"ti,tmp121"
-		"ti,tmp122"
-		"ti,lm71"
-		"ti,lm74"
-
-See Documentation/devicetree/bindings/spi/spi-bus.txt for more required and
-optional properties.
-
-Example:
-
-spi_master {
-	temperature-sensor@0 {
-		compatible = "ti,lm70";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/hwmon/lm75.yaml b/Documentation/devicetree/bindings/hwmon/lm75.yaml
index 72980d083c21..8226e3b5d028 100644
--- a/Documentation/devicetree/bindings/hwmon/lm75.yaml
+++ b/Documentation/devicetree/bindings/hwmon/lm75.yaml
@@ -14,6 +14,7 @@ properties:
   compatible:
     enum:
       - adi,adt75
+      - atmel,at30ts74
       - dallas,ds1775
       - dallas,ds75
       - dallas,ds7505
diff --git a/Documentation/devicetree/bindings/hwmon/lm90.txt b/Documentation/devicetree/bindings/hwmon/lm90.txt
deleted file mode 100644
index 398dcb965751..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm90.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* LM90 series thermometer.
-
-Required node properties:
-- compatible: manufacturer and chip name, one of
-		"adi,adm1032"
-		"adi,adt7461"
-		"adi,adt7461a"
-		"gmt,g781"
-		"national,lm90"
-		"national,lm86"
-		"national,lm89"
-		"national,lm99"
-		"dallas,max6646"
-		"dallas,max6647"
-		"dallas,max6649"
-		"dallas,max6657"
-		"dallas,max6658"
-		"dallas,max6659"
-		"dallas,max6680"
-		"dallas,max6681"
-		"dallas,max6695"
-		"dallas,max6696"
-		"onnn,nct1008"
-		"winbond,w83l771"
-		"nxp,sa56004"
-		"ti,tmp451"
-
-- reg: I2C bus address of the device
-
-- vcc-supply: vcc regulator for the supply voltage.
-
-Optional properties:
-- interrupts: Contains a single interrupt specifier which describes the
-              LM90 "-ALERT" pin output.
-              See interrupt-controller/interrupts.txt for the format.
-
-- #thermal-sensor-cells: should be set to 1. See thermal/thermal-sensor.yaml
-	      for details. See <include/dt-bindings/thermal/lm90.h> for the
-	      definition of the local, remote and 2nd remote sensor index
-	      constants.
-
-Example LM90 node:
-
-temp-sensor {
-	compatible = "onnn,nct1008";
-	reg = <0x4c>;
-	vcc-supply = <&palmas_ldo6_reg>;
-	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
-	#thermal-sensor-cells = <1>;
-}
diff --git a/Documentation/devicetree/bindings/hwmon/ltc4151.txt b/Documentation/devicetree/bindings/hwmon/ltc4151.txt
deleted file mode 100644
index d008a5ef525a..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ltc4151.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-LTC4151 High Voltage I2C Current and Voltage Monitor
-
-Required properties:
-- compatible: Must be "lltc,ltc4151"
-- reg: I2C address
-
-Optional properties:
-- shunt-resistor-micro-ohms
-	Shunt resistor value in micro-Ohms
-	Defaults to <1000> if unset.
-
-Example:
-
-ltc4151@6e {
-	compatible = "lltc,ltc4151";
-	reg = <0x6e>;
-	shunt-resistor-micro-ohms = <1500>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/mcp3021.txt b/Documentation/devicetree/bindings/hwmon/mcp3021.txt
deleted file mode 100644
index 294318ba6914..000000000000
--- a/Documentation/devicetree/bindings/hwmon/mcp3021.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-mcp3021 properties
-
-Required properties:
-- compatible: Must be one of the following:
-	- "microchip,mcp3021" for mcp3021
-	- "microchip,mcp3221" for mcp3221
-- reg: I2C address
-
-Optional properties:
-
-- reference-voltage-microvolt
-	Reference voltage in microvolt (uV)
-
-Example:
-
-mcp3021@4d {
-	compatible = "microchip,mcp3021";
-	reg = <0x4d>;
-
-	reference-voltage-microvolt = <4500000>; /* 4.5 V */
-};
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml b/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml
new file mode 100644
index 000000000000..390dd6755ff5
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/microchip,lan966x.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/microchip,lan966x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN966x Hardware Monitor
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  Microchip LAN966x temperature monitor and fan controller
+
+properties:
+  compatible:
+    enum:
+      - microchip,lan9668-hwmon
+
+  reg:
+    items:
+      - description: PVT registers
+      - description: FAN registers
+
+  reg-names:
+    items:
+      - const: pvt
+      - const: fan
+
+  clocks:
+    maxItems: 1
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    hwmon: hwmon@e2010180 {
+        compatible = "microchip,lan9668-hwmon";
+        reg = <0xe2010180 0xc>,
+              <0xe20042a8 0xc>;
+        reg-names = "pvt", "fan";
+        clocks = <&sys_clk>;
+        #thermal-sensor-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml
new file mode 100644
index 000000000000..028d6e570131
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/microchip,mcp3021.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/microchip,mcp3021.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP3021 A/D converter
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp3021
+      - microchip,mcp3221
+
+  reg:
+    maxItems: 1
+
+  reference-voltage-microvolt:
+    description:
+      VDD supply power and reference voltage
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@4d {
+            compatible = "microchip,mcp3021";
+            reg = <0x4d>;
+
+            reference-voltage-microvolt = <4500000>; /* 4.5 V */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
index 76be625d5646..51e8619dbf3c 100644
--- a/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
+++ b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
@@ -22,7 +22,7 @@ properties:
 
   clocks:
     items:
-      - description: AHB reference clock
+      - description: System reference clock
 
   '#thermal-sensor-cells':
     const: 0
@@ -40,5 +40,5 @@ examples:
         compatible = "microchip,sparx5-temp";
         reg = <0x10508110 0xc>;
         #thermal-sensor-cells = <0>;
-        clocks = <&ahb_clk>;
+        clocks = <&sys_clk>;
     };
diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
index b79f069a04c2..ae4f68d4e696 100644
--- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
+++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
@@ -4,11 +4,37 @@
 $id: http://devicetree.org/schemas/hwmon/moortec,mr75203.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Moortec Semiconductor MR75203 PVT Controller bindings
+title: Moortec Semiconductor MR75203 PVT Controller
 
 maintainers:
   - Rahul Tanwar <rtanwar@maxlinear.com>
 
+description: |
+  A Moortec PVT (Process, Voltage, Temperature) monitoring logic design can
+  include many different units.
+  Such a design will usually consists of several Moortec's embedded analog IPs,
+  and a single Moortec controller (mr75203) to configure and control the IPs.
+
+  Some of the Moortec's analog hard IPs that can be used in a design:
+  *) Temperature Sensor (TS) - used to monitor core temperature (e.g. mr74137).
+  *) Voltage Monitor (VM) - used to monitor voltage levels (e.g. mr74138).
+  *) Process Detector (PD) - used to assess silicon speed (e.g. mr74139).
+  *) Delay Chain - ring oscillator connected to the PD, used to measure IO
+     based transistors (e.g. mr76008 ring oscillator at 1.1V, mr76007 ring
+     oscillator at 1.8V).
+  *) Pre Scaler - provides divide-by-X scaling of input voltage, which can then
+     be presented for VM for measurement within its range (e.g. mr76006 -
+     divide by 2 pre-scaler).
+
+  TS, VM & PD also include a digital interface, which consists of configuration
+  inputs and measurement outputs.
+
+  Some of the units have number of series, each series can have slightly
+  different characteristics.
+
+  The mr75203 binding describes configuration for the controller unit, but also
+  for some of the analog IPs.
+
 properties:
   compatible:
     const: moortec,mr75203
@@ -44,13 +70,76 @@ properties:
   "#thermal-sensor-cells":
     const: 1
 
+  moortec,vm-active-channels:
+    description:
+      Defines the number of channels per VM that are actually used and are
+      connected to some input source.
+      Maximum number of items - number of VMs.
+      Maximum value of each item - number of channels.
+      Minimum value of each item - 0 (which means entire VM sensor is not used).
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  moortec,vm-pre-scaler-x2:
+    description:
+      Defines the channels that use a mr76006 pre-scaler to divide the input
+      source by 2.
+      The pre-scaler is used for input sources that exceed the VM input range.
+      The driver uses this information to present to the user with the actual
+      value of the voltage source.
+      For channels that are not listed, no pre-scaler is assumed.
+      Maximum number of items - total number of channels in all VMs.
+      Each channel should not appear more than once.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+
+  moortec,ts-series:
+    description:
+      Definition of the temperature equation and coefficients that shall be
+      used to convert the digital output to value in milli-Celsius.
+    minimum: 5
+    maximum: 6
+    default: 5
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-g:
+    description:
+      G coefficient for temperature equation.
+      Default for series 5 = 60000
+      Default for series 6 = 57400
+    multipleOf: 1000
+    minimum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-h:
+    description:
+      H coefficient for temperature equation.
+      Default for series 5 = 200000
+      Default for series 6 = 249400
+    multipleOf: 1000
+    minimum: 1000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-cal5:
+    description:
+      cal5 coefficient for temperature equation.
+      Default for series 5 = 4094
+      Default for series 6 = 4096
+    minimum: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-j:
+    description:
+      J coefficient for temperature equation.
+      Default for series 5 = -100
+      Default for series 6 = 0
+    multipleOf: 1000
+    maximum: 0
+    $ref: /schemas/types.yaml#/definitions/int32
+
 required:
   - compatible
   - reg
   - reg-names
-  - intel,vm-map
   - clocks
-  - resets
   - "#thermal-sensor-cells"
 
 additionalProperties: false
@@ -67,5 +156,9 @@ examples:
         intel,vm-map = [03 01 04 ff ff];
         clocks = <&osc0>;
         resets = <&rcu0 0x40 7>;
+        moortec,vm-active-channels = /bits/ 8 <0x10 0x05>;
+        moortec,vm-pre-scaler-x2 = /bits/ 8 <5 6 20>;
+        moortec,ts-coeff-g = <61400>;
+        moortec,ts-coeff-h = <253700>;
         #thermal-sensor-cells = <1>;
     };
diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
new file mode 100644
index 000000000000..7b9d48d6d6da
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/national,lm90.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LM90 series thermometer
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1032
+      - adi,adt7461
+      - adi,adt7461a
+      - adi,adt7481
+      - dallas,max6646
+      - dallas,max6647
+      - dallas,max6649
+      - dallas,max6657
+      - dallas,max6658
+      - dallas,max6659
+      - dallas,max6680
+      - dallas,max6681
+      - dallas,max6695
+      - dallas,max6696
+      - gmt,g781
+      - national,lm86
+      - national,lm89
+      - national,lm90
+      - national,lm99
+      - nxp,sa56004
+      - onnn,nct1008
+      - ti,tmp451
+      - ti,tmp461
+      - winbond,w83l771
+
+
+  interrupts:
+    items:
+      - description: |
+          Single interrupt specifier which describes the LM90 "-ALERT" pin
+          output.
+
+  reg:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  vcc-supply:
+    description: phandle to the regulator that provides the +VCC supply
+
+  ti,extended-range-enable:
+    description: Set to enable extended range temperature.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+patternProperties:
+  "^channel@([0-2])$":
+    type: object
+    description: Represents channels of the device and their specific configuration.
+
+    properties:
+      reg:
+        description: The channel number. 0 is local channel, 1-2 are remote channels.
+        items:
+          minimum: 0
+          maximum: 2
+
+      label:
+        description: A descriptive name for this channel, like "ambient" or "psu".
+
+      temperature-offset-millicelsius:
+        description: Temperature offset to be added to or subtracted from remote temperature measurements.
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - adi,adt7461
+                - adi,adt7461a
+                - adi,adt7481
+                - ti,tmp451
+                - ti,tmp461
+    then:
+      properties:
+        ti,extended-range-enable: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - dallas,max6646
+              - dallas,max6647
+              - dallas,max6649
+              - dallas,max6657
+              - dallas,max6658
+              - dallas,max6659
+              - dallas,max6695
+              - dallas,max6696
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adt7461
+              - adi,adt7461a
+              - adi,adt7481
+              - onnn,nct1008
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius:
+              maximum: 127750
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,adm1032
+              - dallas,max6680
+              - dallas,max6681
+              - gmt,g781
+              - national,lm86
+              - national,lm89
+              - national,lm90
+              - national,lm99
+              - nxp,sa56004
+              - winbond,w83l771
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius:
+              maximum: 127875
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tmp451
+              - ti,tmp461
+    then:
+      patternProperties:
+        "^channel@([0-2])$":
+          properties:
+            temperature-offset-millicelsius:
+              maximum: 127937
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@4c {
+            compatible = "onnn,nct1008";
+            reg = <0x4c>;
+            vcc-supply = <&palmas_ldo6_reg>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            #thermal-sensor-cells = <1>;
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@4c {
+            compatible = "adi,adt7481";
+            reg = <0x4c>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0x0>;
+                label = "local";
+            };
+
+            channel@1 {
+                reg = <0x1>;
+                label = "front";
+                temperature-offset-millicelsius = <4000>;
+            };
+
+            channel@2 {
+                reg = <0x2>;
+                label = "back";
+                temperature-offset-millicelsius = <750>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
new file mode 100644
index 000000000000..3d0146e20d3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+---
+$id: http://devicetree.org/schemas/hwmon/ntc-thermistor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NTC thermistor temperature sensors
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Thermistors with negative temperature coefficient (NTC) are resistors that
+  vary in resistance in an often non-linear way in relation to temperature.
+  The negative temperature coefficient means that the resistance decreases
+  as the temperature rises. Since the relationship between resistance and
+  temperature is non-linear, software drivers most often need to use a look
+  up table and interpolation to get from resistance to temperature.
+
+  When used in practice, a thermistor is often connected between ground, a
+  pull-up resistor or/and a pull-down resistor and a fixed voltage like this:
+
+      + e.g. 5V = pull-up voltage (puv)
+      |
+     +-+
+     | |
+     | | Pull-up resistor
+     | | (puo)
+     +-+
+      |-------------------------o
+     +-+ |                      ^
+     | |/                       |
+     | /                        |
+     |/| Thermistor             | Measured voltage (mv)
+     / |                        | "connected ground"
+    /| |                        |
+     +-+                        |
+      |-------------------------o
+     +-+                        ^
+     | |                        |
+     | | Pull-down resistor     | Measured voltage (mv)
+     | | (pdo)                  | "connected positive"
+     +-+                        |
+      |                         |
+      |                         v
+      + GND                     GND
+
+  The arrangements of where we measure the voltage over the thermistor are
+  called "connected ground" and "connected positive" and shall be understood as
+  the cases when either pull-up or pull-down resistance is zero.
+
+  If the pull-up resistance is 0 one end of the thermistor is connected to the
+  positive voltage and we get the thermistor on top of a pull-down resistor
+  and we take the measure between the thermistor and the pull-down resistor.
+
+  Conversely if the pull-down resistance is zero, one end of the thermistor is
+  connected to ground and we get the thermistor under the pull-up resistor
+  and we take the measure between the pull-up resistor and the thermistor.
+
+  We can use both pull-up and pull-down resistors at the same time, and then
+  the figure illustrates where the voltage will be measured for the "connected
+  ground" and "connected positive" cases.
+
+properties:
+  $nodename:
+    pattern: "^thermistor(.*)?$"
+
+  compatible:
+    oneOf:
+      - const: epcos,b57330v2103
+      - const: epcos,b57891s0103
+      - const: murata,ncp15wb473
+      - const: murata,ncp18wb473
+      - const: murata,ncp21wb473
+      - const: murata,ncp03wb473
+      - const: murata,ncp15wl333
+      - const: murata,ncp03wf104
+      - const: murata,ncp15xh103
+      - const: samsung,1404-001221
+      # Deprecated "ntp," compatible strings
+      - const: ntc,ncp15wb473
+        deprecated: true
+      - const: ntc,ncp18wb473
+        deprecated: true
+      - const: ntc,ncp21wb473
+        deprecated: true
+      - const: ntc,ncp03wb473
+        deprecated: true
+      - const: ntc,ncp15wl333
+        deprecated: true
+
+  "#thermal-sensor-cells":
+    description: Thermal sensor cells if used for thermal sensoring.
+    const: 0
+
+  pullup-uv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Pull-up voltage in micro volts. Must always be specified.
+
+  pullup-ohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Pull-up resistance in ohms. Must always be specified, even
+      if zero.
+
+  pulldown-ohm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Pull-down resistance in ohms. Must always be specified, even
+      if zero.
+
+  connected-positive:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Indicates how the thermistor is connected in series with
+      a pull-up and/or a pull-down resistor. See the description above for
+      an illustration. If this flag is NOT specified, the thermistor is assumed
+      to be connected-ground, which usually means a pull-down resistance of
+      zero but complex arrangements are possible.
+
+  # See /schemas/iio/adc/adc.yaml
+  io-channels:
+    maxItems: 1
+    description: IIO ADC channel to read the voltage over the resistor. Must
+      always be specified.
+
+required:
+  - compatible
+  - pullup-uv
+  - pullup-ohm
+  - pulldown-ohm
+  - io-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    thermistor {
+      compatible = "murata,ncp18wb473";
+      io-channels = <&gpadc 0x06>;
+      pullup-uv = <1800000>;
+      pullup-ohm = <220000>;
+      pulldown-ohm = <0>;
+      #thermal-sensor-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
deleted file mode 100644
index 4c5c3712970e..000000000000
--- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-NTC Thermistor hwmon sensors
--------------------------------
-
-Requires node properties:
-- "compatible" value : one of
-	"epcos,b57330v2103"
-	"epcos,b57891s0103"
-	"murata,ncp15wb473"
-	"murata,ncp18wb473"
-	"murata,ncp21wb473"
-	"murata,ncp03wb473"
-	"murata,ncp15wl333"
-	"murata,ncp03wf104"
-	"murata,ncp15xh103"
-
-/* Usage of vendor name "ntc" is deprecated */
-<DEPRECATED>	"ntc,ncp15wb473"
-<DEPRECATED>	"ntc,ncp18wb473"
-<DEPRECATED>	"ntc,ncp21wb473"
-<DEPRECATED>	"ntc,ncp03wb473"
-<DEPRECATED>	"ntc,ncp15wl333"
-
-- "pullup-uv"	Pull up voltage in micro volts
-- "pullup-ohm"	Pull up resistor value in ohms
-- "pulldown-ohm" Pull down resistor value in ohms
-- "connected-positive" Always ON, If not specified.
-		Status change is possible.
-- "io-channels"	Channel node of ADC to be used for
-		conversion.
-
-Optional node properties:
-- "#thermal-sensor-cells" Used to expose itself to thermal fw.
-
-Read more about iio bindings at
-	https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/
-
-Example:
-	ncp15wb473@0 {
-		compatible = "murata,ncp15wb473";
-		pullup-uv = <1800000>;
-		pullup-ohm = <47000>;
-		pulldown-ohm = <0>;
-		io-channels = <&adc 3>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
new file mode 100644
index 000000000000..358b262431fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct6775.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/nuvoton,nct6775.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NCT6775 and compatible Super I/O chips
+
+maintainers:
+  - Zev Weiss <zev@bewilderbeest.net>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nct6106
+      - nuvoton,nct6116
+      - nuvoton,nct6775
+      - nuvoton,nct6776
+      - nuvoton,nct6779
+      - nuvoton,nct6791
+      - nuvoton,nct6792
+      - nuvoton,nct6793
+      - nuvoton,nct6795
+      - nuvoton,nct6796
+      - nuvoton,nct6797
+      - nuvoton,nct6798
+
+  reg:
+    maxItems: 1
+
+  nuvoton,tsi-channel-mask:
+    description:
+      Bitmask indicating which TSI temperature sensor channels are
+      active.  LSB is TSI0, bit 1 is TSI1, etc.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0xff
+    default: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        superio@4d {
+            compatible = "nuvoton,nct6779";
+            reg = <0x4d>;
+            nuvoton,tsi-channel-mask = <0x03>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
new file mode 100644
index 000000000000..cd8dcd797031
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nuvoton,nct7802.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/nuvoton,nct7802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton NCT7802Y Hardware Monitoring IC
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  The NCT7802Y is a hardware monitor IC which supports one on-die and up to
+  5 remote temperature sensors with SMBus interface.
+
+  Datasheets:
+    https://www.nuvoton.com/export/resource-files/Nuvoton_NCT7802Y_Datasheet_V12.pdf
+
+additionalProperties: false
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,nct7802
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^channel@[0-3]$":
+    type: object
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        items:
+          - enum:
+              - 0    # Local Temperature Sensor ("LTD")
+              - 1    # Remote Temperature Sensor or Voltage Sensor 1 ("RTD1")
+              - 2    # Remote Temperature Sensor or Voltage Sensor 2 ("RTD2")
+              - 3    # Remote Temperature Sensor or Voltage Sensor 3 ("RTD3")
+
+      sensor-type:
+        items:
+          - enum:
+              - temperature
+              - voltage
+
+      temperature-mode:
+        items:
+          - enum:
+              - thermistor
+              - thermal-diode
+
+    required:
+      - reg
+
+    allOf:
+      # For channels RTD1, RTD2 and RTD3, require sensor-type to be set.
+      # Otherwise (for all other channels), do not allow temperature-mode to be
+      # set.
+      - if:
+          properties:
+            reg:
+              items:
+                - enum:
+                    - 1
+                    - 2
+                    - 3
+        then:
+          required:
+            - sensor-type
+        else:
+          not:
+            required:
+              - sensor-type
+
+      # For channels RTD1 and RTD2 and if sensor-type is "temperature", require
+      # temperature-mode to be set. Otherwise (for all other channels or
+      # sensor-type settings), do not allow temperature-mode to be set
+      - if:
+          properties:
+            reg:
+              items:
+                - enum:
+                    - 1
+                    - 2
+            sensor-type:
+              items:
+                - enum:
+                    - temperature
+        then:
+          required:
+            - temperature-mode
+        else:
+          not:
+            required:
+              - temperature-mode
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nct7802@28 {
+            compatible = "nuvoton,nct7802";
+            reg = <0x28>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 { /* LTD */
+                reg = <0>;
+            };
+
+            channel@1 { /* RTD1 */
+                reg = <1>;
+                sensor-type = "voltage";
+            };
+
+            channel@2 { /* RTD2 */
+                reg = <2>;
+                sensor-type = "temperature";
+                temperature-mode = "thermal-diode";
+            };
+
+            channel@3 { /* RTD3 */
+                reg = <3>;
+                sensor-type = "temperature";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml b/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml
new file mode 100644
index 000000000000..306f67315835
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nxp,mc34vr500.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/nxp,mc34vr500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP MC34VR500 hwmon sensor
+
+maintainers:
+  - Mario Kicherer <dev@kicherer.org>
+
+properties:
+  compatible:
+    enum:
+      - nxp,mc34vr500
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@8 {
+        compatible = "nxp,mc34vr500";
+        reg = <0x08>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
new file mode 100644
index 000000000000..da8292bc32f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,lm25066.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/pmbus/ti,lm25066.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: National Semiconductor/Texas Instruments LM250x6/LM506x power-management ICs
+
+maintainers:
+  - Zev Weiss <zev@bewilderbeest.net>
+
+description: |
+  The LM25066 family of power-management ICs (a.k.a. hot-swap
+  controllers or eFuses in various contexts) are PMBus devices that
+  offer temperature, current, voltage, and power monitoring.
+
+  Datasheet: https://www.ti.com/lit/ds/symlink/lm25066.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,lm25056
+      - ti,lm25066
+      - ti,lm5064
+      - ti,lm5066
+      - ti,lm5066i
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt (sense) resistor value in micro-Ohms
+    default: 1000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@40 {
+            compatible = "ti,lm25066";
+            reg = <0x40>;
+            shunt-resistor-micro-ohms = <675>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
index 4509e688623a..48886f0ce415 100644
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
@@ -1,67 +1 @@
-Bindings for a fan connected to the PWM lines
-
-Required properties:
-- compatible	: "pwm-fan"
-- pwms		: the PWM that is used to control the PWM fan
-- cooling-levels      : PWM duty cycle values in a range from 0 to 255
-			which correspond to thermal cooling states
-
-Optional properties:
-- fan-supply		: phandle to the regulator that provides power to the fan
-- interrupts		: This contains an interrupt specifier for each fan
-			  tachometer output connected to an interrupt source.
-			  The output signal must generate a defined number of
-			  interrupts per fan revolution, which require that
-			  it must be self resetting edge interrupts. See
-			  interrupt-controller/interrupts.txt for the format.
-- pulses-per-revolution : define the number of pulses per fan revolution for
-			  each tachometer input as an integer (default is 2
-			  interrupts per revolution). The value must be
-			  greater than zero.
-
-Example:
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		#cooling-cells = <2>;
-		pwms = <&pwm 0 10000 0>;
-		cooling-levels = <0 102 170 230>;
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			     thermal-sensors = <&tmu 0>;
-			     polling-delay-passive = <0>;
-			     polling-delay = <0>;
-			     trips {
-					cpu_alert1: cpu-alert1 {
-						    temperature = <100000>; /* millicelsius */
-						    hysteresis = <2000>; /* millicelsius */
-						    type = "passive";
-					};
-			     };
-			     cooling-maps {
-					map0 {
-						    trip = <&cpu_alert1>;
-						    cooling-device = <&fan0 0 1>;
-					};
-			     };
-		};
-
-Example 2:
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm 0 40000 0>;
-		fan-supply = <&reg_fan>;
-		interrupt-parent = <&gpio5>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-		pulses-per-revolution = <2>;
-	};
-
-Example 3:
-	fan0: pwm-fan {
-		compatible = "pwm-fan";
-		pwms = <&pwm1 0 25000 0>;
-		interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>,
-			<&gpio2 5 IRQ_TYPE_EDGE_FALLING>;
-		pulses-per-revolution = <2>, <1>;
-	};
+This file has moved to pwm-fan.yaml.
diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
new file mode 100644
index 000000000000..4e5abf7580cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pwm-fan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fan connected to PWM lines
+
+maintainers:
+  - Jean Delvare <jdelvare@suse.com>
+  - Guenter Roeck <linux@roeck-us.net>
+
+properties:
+  compatible:
+    const: pwm-fan
+
+  cooling-levels:
+    description: PWM duty cycle values corresponding to thermal cooling states.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      maximum: 255
+
+  fan-supply:
+    description: Phandle to the regulator that provides power to the fan.
+
+  interrupts:
+    description:
+      This contains an interrupt specifier for each fan tachometer output
+      connected to an interrupt source. The output signal must generate a
+      defined number of interrupts per fan revolution, which require that
+      it must be self resetting edge interrupts.
+    maxItems: 1
+
+  pulses-per-revolution:
+    description:
+      Define the number of pulses per fan revolution for each tachometer
+      input as an integer.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4
+    default: 2
+
+  pwms:
+    description: The PWM that is used to control the fan.
+    maxItems: 1
+
+  "#cooling-cells": true
+
+required:
+  - compatible
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    pwm-fan {
+      compatible = "pwm-fan";
+      cooling-levels = <0 102 170 230>;
+      pwms = <&pwm 0 10000 0>;
+      #cooling-cells = <2>;
+    };
+
+    thermal-zones {
+      cpu_thermal: cpu-thermal {
+        thermal-sensors = <&tmu 0>;
+        polling-delay-passive = <0>;
+        polling-delay = <0>;
+
+        trips {
+          cpu_alert1: cpu-alert1 {
+            temperature = <100000>; /* millicelsius */
+            hysteresis = <2000>; /* millicelsius */
+            type = "passive";
+          };
+        };
+
+        cooling-maps {
+          map0 {
+            trip = <&cpu_alert1>;
+            cooling-device = <&fan0 0 1>;
+          };
+        };
+      };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pwm-fan {
+      compatible = "pwm-fan";
+      pwms = <&pwm 0 40000 0>;
+      fan-supply = <&reg_fan>;
+      interrupt-parent = <&gpio5>;
+      interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+      pulses-per-revolution = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml
new file mode 100644
index 000000000000..80df7182ea28
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,sht15.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/sensirion,sht15.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SHT15 humidity and temperature sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: sensirion,sht15
+
+  clk-gpios:
+    maxItems: 1
+
+  data-gpios:
+    maxItems: 1
+
+  vcc-supply:
+    description: regulator that drives the VCC pin
+
+required:
+  - compatible
+  - clk-gpios
+  - data-gpios
+  - vcc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    sensor {
+        compatible = "sensirion,sht15";
+        clk-gpios = <&gpio4 12 0>;
+        data-gpios = <&gpio4 13 0>;
+        vcc-supply = <&reg_sht15>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_sensor>;
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
index 7d49478d9668..159238efa9ed 100644
--- a/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
+++ b/Documentation/devicetree/bindings/hwmon/sensirion,shtc1.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Christopher Ruehl chris.ruehl@gtsys.com.hk
 
 description: |
-  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensor
+  The SHTC1, SHTW1 and SHTC3 are digital humidity and temperature sensors
   designed especially for battery-driven high-volume consumer electronics
   applications.
   For further information refere to Documentation/hwmon/shtc1.rst
@@ -31,13 +31,13 @@ properties:
   sensirion,blocking-io:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
-      If set, the driver hold the i2c bus until measurement is finished.
+      If set, the driver holds the i2c bus until the measurement is finished.
 
   sensirion,low-precision:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
-      If set, the sensor aquire data with low precision (not recommended).
-      The driver aquire data with high precision by default.
+      If set, the sensor acquires data with low precision (not recommended).
+      The driver acquires data with high precision by default.
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/hwmon/sht15.txt b/Documentation/devicetree/bindings/hwmon/sht15.txt
deleted file mode 100644
index 6a80277cc426..000000000000
--- a/Documentation/devicetree/bindings/hwmon/sht15.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Sensirion SHT15 Humidity and Temperature Sensor
-
-Required properties:
-
- - "compatible": must be "sensirion,sht15".
- - "data-gpios": GPIO connected to the data line.
- - "clk-gpios": GPIO connected to the clock line.
- - "vcc-supply": regulator that drives the VCC pin.
-
-Example:
-
-	sensor {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sensor>;
-		compatible = "sensirion,sht15";
-		clk-gpios = <&gpio4 12 0>;
-		data-gpios = <&gpio4 13 0>;
-		vcc-supply = <&reg_sht15>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml
new file mode 100644
index 000000000000..f5b34528928d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/starfive,jh71x0-temp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH71x0 Temperature Sensor
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+description: |
+  StarFive Technology Co. JH71x0 embedded temperature sensor
+
+properties:
+  compatible:
+    enum:
+      - starfive,jh7100-temp
+      - starfive,jh7110-temp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: "sense"
+      - const: "bus"
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  resets:
+    minItems: 2
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: "sense"
+      - const: "bus"
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/starfive-jh7100.h>
+    #include <dt-bindings/reset/starfive-jh7100.h>
+
+    temperature-sensor@124a0000 {
+        compatible = "starfive,jh7100-temp";
+        reg = <0x124a0000 0x10000>;
+        clocks = <&clkgen JH7100_CLK_TEMP_SENSE>,
+                 <&clkgen JH7100_CLK_TEMP_APB>;
+        clock-names = "sense", "bus";
+        #thermal-sensor-cells = <0>;
+        resets = <&rstgen JH7100_RSTN_TEMP_SENSE>,
+                 <&rstgen JH7100_RSTN_TEMP_APB>;
+        reset-names = "sense", "bus";
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
index 6f0443322a36..8648877d2d01 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml
@@ -26,6 +26,7 @@ properties:
       - ti,ina226
       - ti,ina230
       - ti,ina231
+      - ti,ina238
 
   reg:
     maxItems: 1
@@ -35,6 +36,31 @@ properties:
       Shunt resistor value in micro-Ohm.
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  ti,shunt-gain:
+    description: |
+      Programmable gain divisor for the shunt voltage accuracy and range. This
+      property only applies to devices that have configurable PGA/ADCRANGE. The
+      gain value is used configure the gain and to convert the shunt voltage,
+      current and power register values when reading measurements from the
+      device.
+
+      For devices that have a configurable PGA (e.g. INA209, INA219, INA220),
+      the gain value maps directly with the PG bits of the config register.
+
+      For devices that have ADCRANGE configuration (e.g. INA238) a shunt-gain
+      value of 1 maps to ADCRANGE=1 where no gain divisor is applied to the
+      shunt voltage, and a value of 4 maps to ADCRANGE=0 such that a wider
+      voltage range is used.
+
+      The default value is device dependent, and is defined by the reset value
+      of PGA/ADCRANGE in the respective configuration registers.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+
+  vs-supply:
+    description: phandle to the regulator that provides the VS supply typically
+      in range from 2.7 V to 5.5 V.
+
 required:
   - compatible
   - reg
@@ -51,5 +77,6 @@ examples:
             compatible = "ti,ina220";
             reg = <0x44>;
             shunt-resistor = <1000>;
+            vs-supply = <&vdd_3v0>;
         };
     };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml
new file mode 100644
index 000000000000..c5a889e3e27b
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp102.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP102 temperature sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp102
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@48 {
+            compatible = "ti,tmp102";
+            reg = <0x48>;
+            interrupt-parent = <&gpio7>;
+            interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+            #thermal-sensor-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml
new file mode 100644
index 000000000000..dcbc6fbc3b48
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp108.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp108.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP108 temperature sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp108
+
+  interrupts:
+    items:
+      - description: alert interrupt
+
+  reg:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@48 {
+            compatible = "ti,tmp108";
+            reg = <0x48>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&tmp_alrt>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
new file mode 100644
index 000000000000..0e8ddf0ad789
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp401.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp401.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP401, TPM411 and TMP43x temperature sensor
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  ±1°C Remote and Local temperature sensor
+
+  Datasheets:
+  https://www.ti.com/lit/ds/symlink/tmp401.pdf
+  https://www.ti.com/lit/ds/symlink/tmp411.pdf
+  https://www.ti.com/lit/ds/symlink/tmp431.pdf
+  https://www.ti.com/lit/ds/symlink/tmp435.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp401
+      - ti,tmp411
+      - ti,tmp431
+      - ti,tmp432
+      - ti,tmp435
+
+  reg:
+    maxItems: 1
+
+  ti,extended-range-enable:
+    description:
+      When set, this sensor measures over extended temperature range.
+    type: boolean
+
+  ti,n-factor:
+    description:
+      value to be used for converting remote channel measurements to
+      temperature.
+    $ref: /schemas/types.yaml#/definitions/int32
+    minimum: -128
+    maximum: 127
+
+  ti,beta-compensation:
+    description:
+      value to select beta correction range.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tmp401
+    then:
+      properties:
+        ti,n-factor: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tmp401
+              - ti,tmp411
+    then:
+      properties:
+        ti,beta-compensation: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp401";
+        reg = <0x4c>;
+      };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp431";
+        reg = <0x4c>;
+        ti,extended-range-enable;
+        ti,n-factor = <0x3b>;
+        ti,beta-compensation = <0x7>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml
new file mode 100644
index 000000000000..a6f1fa75a67c
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp421.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP42x/TMP44x temperature sensor
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  ±1°C Remote and Local temperature sensor
+  https://www.ti.com/lit/ds/symlink/tmp422.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp421
+      - ti,tmp422
+      - ti,tmp423
+      - ti,tmp441
+      - ti,tmp442
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "^channel@([0-3])$":
+    type: object
+    description: |
+      Represents channels of the device and their specific configuration.
+
+    properties:
+      reg:
+        description: |
+          The channel number. 0 is local channel, 1-3 are remote channels
+        items:
+          minimum: 0
+          maximum: 3
+
+      label:
+        description: |
+          A descriptive name for this channel, like "ambient" or "psu".
+
+      ti,n-factor:
+        description: |
+          The value (two's complement) to be programmed in the channel specific N correction register.
+          For remote channels only.
+        $ref: /schemas/types.yaml#/definitions/int32
+        minimum: -128
+        maximum: 127
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp422";
+        reg = <0x4c>;
+      };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4c {
+        compatible = "ti,tmp422";
+        reg = <0x4c>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0x0>;
+          ti,n-factor = <0x1>;
+          label = "local";
+        };
+
+        channel@1 {
+          reg = <0x1>;
+          ti,n-factor = <0x0>;
+          label = "somelabel";
+        };
+
+        channel@2 {
+          reg = <0x2>;
+          status = "disabled";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
new file mode 100644
index 000000000000..f9c00cbb2806
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/ti,tmp464.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TMP464 and TMP468 temperature sensors
+
+maintainers:
+  - Guenter Roeck <linux@roeck-us.net>
+
+description: |
+  ±0.0625°C Remote and Local temperature sensor
+  https://www.ti.com/lit/ds/symlink/tmp464.pdf
+  https://www.ti.com/lit/ds/symlink/tmp468.pdf
+
+properties:
+  compatible:
+    enum:
+      - ti,tmp464
+      - ti,tmp468
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+patternProperties:
+  "^channel@([0-8])$":
+    type: object
+    description: |
+      Represents channels of the device and their specific configuration.
+
+    properties:
+      reg:
+        description: |
+          The channel number. 0 is local channel, 1-8 are remote channels.
+        items:
+          minimum: 0
+          maximum: 8
+
+      label:
+        description: |
+          A descriptive name for this channel, like "ambient" or "psu".
+
+      ti,n-factor:
+        description: |
+          The value (two's complement) to be programmed in the channel specific N correction register.
+          For remote channels only.
+        $ref: /schemas/types.yaml#/definitions/int32
+        minimum: -128
+        maximum: 127
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4b {
+        compatible = "ti,tmp464";
+        reg = <0x4b>;
+      };
+    };
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      sensor@4b {
+        compatible = "ti,tmp464";
+        reg = <0x4b>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        channel@0 {
+          reg = <0x0>;
+          label = "local";
+        };
+
+        channel@1 {
+          reg = <0x1>;
+          ti,n-factor = <(-10)>;
+          label = "external";
+        };
+
+        channel@2 {
+          reg = <0x2>;
+          ti,n-factor = <0x10>;
+          label = "somelabel";
+        };
+
+        channel@3 {
+          reg = <0x3>;
+          status = "disabled";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
index 1502b22c77cc..fde5225ce012 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
@@ -77,15 +77,15 @@ additionalProperties: false
 examples:
   - |
     i2c {
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          tmp513@5c {
-              compatible = "ti,tmp513";
-              reg = <0x5C>;
-              shunt-resistor-micro-ohms = <330000>;
-              ti,bus-range-microvolt = <32000000>;
-              ti,pga-gain = <8>;
-              ti,nfactor = <0x1 0xF3 0x00>;
-          };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tmp513@5c {
+            compatible = "ti,tmp513";
+            reg = <0x5c>;
+            shunt-resistor-micro-ohms = <330000>;
+            ti,bus-range-microvolt = <32000000>;
+            ti,pga-gain = <8>;
+            ti,nfactor = <0x1 0xf3 0x00>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
index 3bc8e73dfbf0..bce68a326919 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
@@ -40,12 +40,12 @@ additionalProperties: false
 examples:
   - |
     i2c {
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          tps23861@30 {
-              compatible = "ti,tps23861";
-              reg = <0x30>;
-              shunt-resistor-micro-ohms = <255000>;
-          };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tps23861@30 {
+            compatible = "ti,tps23861";
+            reg = <0x30>;
+            shunt-resistor-micro-ohms = <255000>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/hwmon/tmp108.txt b/Documentation/devicetree/bindings/hwmon/tmp108.txt
deleted file mode 100644
index 54d4beed4ee5..000000000000
--- a/Documentation/devicetree/bindings/hwmon/tmp108.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-TMP108 temperature sensor
--------------------------
-
-This device supports I2C only.
-
-Requires node properties:
-- compatible : "ti,tmp108"
-- reg : the I2C address of the device. This is 0x48, 0x49, 0x4a, or 0x4b.
-
-Optional properties:
-- interrupts: Reference to the TMP108 alert interrupt.
-- #thermal-sensor-cells: should be set to 0.
-
-Example:
-	tmp108@48 {
-		compatible = "ti,tmp108";
-		reg = <0x48>;
-	};
diff --git a/Documentation/devicetree/bindings/hwmon/vexpress.txt b/Documentation/devicetree/bindings/hwmon/vexpress.txt
index 9c27ed694bbb..4a4df4ffc460 100644
--- a/Documentation/devicetree/bindings/hwmon/vexpress.txt
+++ b/Documentation/devicetree/bindings/hwmon/vexpress.txt
@@ -9,7 +9,7 @@ Requires node properties:
 	"arm,vexpress-power"
 	"arm,vexpress-energy"
 - "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
-  (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+  (see Documentation/devicetree/bindings/arm/vexpress-config.yaml
   for more details)
 
 Optional node properties:
diff --git a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
index 6097e8ac46c1..5a799246a373 100644
--- a/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
+++ b/Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/allwinner,sun6i-a31-p2wi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface) Device Tree Bindings
+title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -55,7 +55,7 @@ examples:
         #size-cells = <0>;
 
         axp221: pmic@68 {
-            compatible = "x-powers,axp221";
+            /* compatible = "x-powers,axp221"; */
             reg = <0x68>;
         };
     };
diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
index 6ecb0270d88d..26bed558c6b8 100644
--- a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
@@ -2,13 +2,13 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson I2C Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Beniamino Galvani <b.galvani@gmail.com>
 
 allOf:
diff --git a/Documentation/devicetree/bindings/i2c/apple,i2c.yaml b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
new file mode 100644
index 000000000000..077d2a539c83
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/apple,i2c.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/apple,i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple/PASemi I2C controller
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+description: |
+  Apple SoCs such as the M1 come with a I2C controller based on the one found
+  in machines with P. A. Semi's PWRficient processors.
+  The bus is used to communicate with e.g. USB PD chips or the speaker
+  amp.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-i2c
+          - apple,t8112-i2c
+          - apple,t6000-i2c
+      - const: apple,i2c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: I2C bus reference clock
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      Desired I2C bus clock frequency in Hz. If not specified, 100 kHz will be
+      used. This frequency is generated by dividing the reference clock.
+      Allowed values are between ref_clk/(16*4) and ref_clk/(16*255).
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@35010000 {
+      compatible = "apple,t8103-i2c", "apple,i2c";
+      reg = <0x35010000 0x4000>;
+      interrupt-parent = <&aic>;
+      interrupts = <0 627 4>;
+      clocks = <&ref_clk>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml b/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml
new file mode 100644
index 000000000000..e58465d1b0c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/arm,i2c-versatile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C Controller on ARM Ltd development platforms
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: arm,versatile-i2c
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+...
+
diff --git a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
index ea643e6c3ef5..6df27b47b922 100644
--- a/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/aspeed,i2c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/aspeed,i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs Device Tree Bindings
+title: ASPEED I2C on the AST24XX, AST25XX, and AST26XX SoCs
 
 maintainers:
   - Rayn Chen <rayn_chen@aspeedtech.com>
@@ -60,10 +60,9 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/clock/aspeed-clock.h>
-    i2c0: i2c-bus@40 {
+    i2c@40 {
       #address-cells = <1>;
       #size-cells = <0>;
-      #interrupt-cells = <1>;
       compatible = "aspeed,ast2500-i2c-bus";
       reg = <0x40 0x40>;
       clocks = <&syscon ASPEED_CLK_APB>;
diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
new file mode 100644
index 000000000000..6adedd3ec399
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/atmel,at91sam-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C for Atmel/Microchip platforms
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - atmel,at91rm9200-i2c
+              - atmel,at91sam9261-i2c
+              - atmel,at91sam9260-i2c
+              - atmel,at91sam9g20-i2c
+              - atmel,at91sam9g10-i2c
+              - atmel,at91sam9x5-i2c
+              - atmel,sama5d4-i2c
+              - atmel,sama5d2-i2c
+              - microchip,sam9x60-i2c
+      - items:
+          - const: microchip,sama7g5-i2c
+          - const: microchip,sam9x60-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    items:
+      - description: TX DMA Channel Specifier
+      - description: RX DMA Channel Specifier
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  atmel,fifo-size:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum number of data the RX and TX FIFOs can store for
+      FIFO capable I2C controllers.
+
+  scl-gpios: true
+
+  sda-gpios: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+
+allOf:
+  - $ref: i2c-controller.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - atmel,sama5d4-i2c
+              - atmel,sama5d2-i2c
+              - microchip,sam9x60-i2c
+              - microchip,sama7g5-i2c
+    then:
+      properties:
+        i2c-sda-hold-time-ns:
+          description:
+            TWD hold time
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c0: i2c@fff84000 {
+        compatible = "atmel,at91sam9g20-i2c";
+        reg = <0xfff84000 0x100>;
+        interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&twi0_clk>;
+        clock-frequency = <400000>;
+
+        eeprom@50 {
+            compatible = "atmel,24c512";
+            reg = <0x50>;
+            pagesize = <128>;
+        };
+    };
+
+    i2c1: i2c@f8034600 {
+        compatible = "atmel,sama5d2-i2c";
+        reg = <0xf8034600 0x100>;
+        interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+            AT91_XDMAC_DT_PERID(11)>,
+               <&dma0
+            (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
+            AT91_XDMAC_DT_PERID(12)>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&flx0>;
+        atmel,fifo-size = <16>;
+        i2c-sda-hold-time-ns = <336>;
+        pinctrl-names = "default", "gpio";
+        pinctrl-0 = <&pinctrl_i2c0>;
+        pinctrl-1 = <&pinctrl_i2c0_gpio>;
+        sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+        scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+        eeprom@54 {
+            compatible = "atmel,24c02";
+            reg = <0x54>;
+            pagesize = <16>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
deleted file mode 100644
index a8a35df41951..000000000000
--- a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Broadcom BCM2835 I2C controller
-
-Required properties:
-- compatible : Should be one of:
-	"brcm,bcm2711-i2c"
-	"brcm,bcm2835-i2c"
-- reg: Should contain register location and length.
-- interrupts: Should contain interrupt.
-- clocks : The clock feeding the I2C controller.
-
-Recommended properties:
-- clock-frequency : desired I2C bus clock frequency in Hz.
-
-Example:
-
-i2c@7e205000 {
-	compatible = "brcm,bcm2835-i2c";
-	reg = <0x7e205000 0x1000>;
-	interrupts = <2 21>;
-	clocks = <&clk_i2c>;
-	clock-frequency = <100000>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml
new file mode 100644
index 000000000000..8256490a7af2
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,bcm2835-i2c.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,bcm2835-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2835 I2C controller
+
+maintainers:
+  - Stephen Warren <swarren@wwwdotorg.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - brcm,bcm2835-i2c
+      - items:
+          - const: brcm,bcm2711-i2c
+          - const: brcm,bcm2835-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@7e205000 {
+        compatible = "brcm,bcm2835-i2c";
+        reg = <0x7e205000 0x1000>;
+        interrupts = <2 21>;
+        clocks = <&clk_i2c>;
+        clock-frequency = <100000>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt
deleted file mode 100644
index 1b87b741fa8e..000000000000
--- a/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Broadcom Kona Family I2C
-=========================
-
-This I2C controller is used in the following Broadcom SoCs:
-
-  BCM11130
-  BCM11140
-  BCM11351
-  BCM28145
-  BCM28155
-
-Required Properties
--------------------
-- compatible: "brcm,bcm11351-i2c", "brcm,kona-i2c"
-- reg: Physical base address and length of controller registers
-- interrupts: The interrupt number used by the controller
-- clocks: clock specifier for the kona i2c external clock
-- clock-frequency: The I2C bus frequency in Hz
-- #address-cells: Should be <1>
-- #size-cells: Should be <0>
-
-Refer to clocks/clock-bindings.txt for generic clock consumer
-properties.
-
-Example:
-
-i2c@3e016000 {
-	compatible = "brcm,bcm11351-i2c","brcm,kona-i2c";
-	reg = <0x3e016000 0x80>;
-	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&bsc1_clk>;
-	clock-frequency = <400000>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml
new file mode 100644
index 000000000000..7a694af90fc6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/brcm,kona-i2c.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/brcm,kona-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family I2C controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm11351-i2c
+          - brcm,bcm21664-i2c
+          - brcm,bcm23550-i2c
+      - const: brcm,kona-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [ 100000, 400000, 1000000, 3400000 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c@3e016000 {
+        compatible = "brcm,bcm11351-i2c", "brcm,kona-i2c";
+        reg = <0x3e016000 0x80>;
+        interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&bsc1_clk>;
+        clock-frequency = <400000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
index 1ca1cd19bd1d..cb24d7b3221c 100644
--- a/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
+++ b/Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/cdns,i2c-r1p10.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Cadence I2C controller Device Tree Bindings
+title: Cadence I2C controller
 
 maintainers:
   - Michal Simek <michal.simek@xilinx.com>
@@ -24,6 +24,9 @@ properties:
   clocks:
     minItems: 1
 
+  resets:
+    maxItems: 1
+
   interrupts:
     maxItems: 1
 
@@ -38,6 +41,13 @@ properties:
     description: |
       Input clock name.
 
+  fifo-depth:
+    description:
+      Size of the data FIFO in bytes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 16
+    enum: [2, 4, 8, 16, 32, 64, 128, 256]
+
 required:
   - compatible
   - reg
@@ -52,9 +62,11 @@ examples:
     i2c@e0004000 {
         compatible = "cdns,i2c-r1p10";
         clocks = <&clkc 38>;
+        resets = <&rstc 288>;
         interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
         reg = <0xe0004000 0x1000>;
         clock-frequency = <400000>;
         #address-cells = <1>;
         #size-cells = <0>;
+        fifo-depth = <8>;
     };
diff --git a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
index b386e4128a79..ab151c9db219 100644
--- a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
+++ b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -10,7 +10,6 @@ title: I2C bus that tunnels through the ChromeOS EC (cros-ec)
 maintainers:
   - Doug Anderson <dianders@chromium.org>
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   On some ChromeOS board designs we've got a connection to the EC
@@ -40,7 +39,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -48,6 +47,7 @@ examples:
             compatible = "google,cros-ec-spi";
             reg = <0>;
             spi-max-frequency = <5000000>;
+            interrupts = <99 0>;
 
             i2c-tunnel {
                 compatible = "google,cros-ec-i2c-tunnel";
diff --git a/Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml b/Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml
new file mode 100644
index 000000000000..7d7a8de7bcd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/hisilicon,ascend910-i2c.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/hisilicon,ascend910-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon common I2C controller
+
+maintainers:
+  - Yicong Yang <yangyicong@hisilicon.com>
+
+description:
+  The HiSilicon common I2C controller can be used for many different
+  types of SoC such as Huawei Ascend AI series chips.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: hisilicon,ascend910-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    default: 400000
+
+  i2c-sda-falling-time-ns:
+    default: 343
+
+  i2c-scl-falling-time-ns:
+    default: 203
+
+  i2c-sda-hold-time-ns:
+    default: 830
+
+  i2c-scl-rising-time-ns:
+    default: 365
+
+  i2c-digital-filter-width-ns:
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@38b0000 {
+      compatible = "hisilicon,ascend910-i2c";
+      reg = <0x38b0000 0x10000>;
+      interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+      i2c-sda-falling-time-ns = <56>;
+      i2c-scl-falling-time-ns = <56>;
+      i2c-sda-hold-time-ns = <56>;
+      i2c-scl-rising-time-ns = <56>;
+      i2c-digital-filter;
+      i2c-digital-filter-width-ns = <0x0>;
+      clocks = <&alg_clk>;
+      clock-frequency = <400000>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml b/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml
new file mode 100644
index 000000000000..6604dcd47251
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/hpe,gxp-i2c.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/hpe,gxp-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HPE GXP SoC I2C Controller
+
+maintainers:
+  - Nick Hawkins <nick.hawkins@hpe.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: hpe,gxp-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+
+  hpe,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the global status and enable interrupt registers shared
+      between each I2C engine controller instance. It enables the I2C
+      engine controller to act as both a master or slave by being able to
+      arm and respond to interrupts from its engine. Each bit in the
+      registers represent the respective bit position.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@2600 {
+        compatible = "hpe,gxp-i2c";
+        reg = <0x2500 0x70>;
+        interrupts = <9>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        hpe,sysreg = <&sysreg_system_controller>;
+        clock-frequency = <10000>;
+
+        eeprom@50 {
+            compatible = "atmel,24c128";
+            reg = <0x50>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
deleted file mode 100644
index 2015f50aed0f..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-I2C for Atmel platforms
-
-Required properties :
-- compatible : Must be one of:
-	"atmel,at91rm9200-i2c",
-	"atmel,at91sam9261-i2c",
-	"atmel,at91sam9260-i2c",
-	"atmel,at91sam9g20-i2c",
-	"atmel,at91sam9g10-i2c",
-	"atmel,at91sam9x5-i2c",
-	"atmel,sama5d4-i2c",
-	"atmel,sama5d2-i2c",
-	"microchip,sam9x60-i2c".
-- reg: physical base address of the controller and length of memory mapped
-     region.
-- interrupts: interrupt number to the cpu.
-- #address-cells = <1>;
-- #size-cells = <0>;
-- clocks: phandles to input clocks.
-
-Optional properties:
-- clock-frequency: Desired I2C bus frequency in Hz, otherwise defaults to 100000
-- dmas: A list of two dma specifiers, one for each entry in dma-names.
-- dma-names: should contain "tx" and "rx".
-- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
-  capable I2C controllers.
-- i2c-sda-hold-time-ns: TWD hold time, only available for:
-	"atmel,sama5d4-i2c",
-	"atmel,sama5d2-i2c",
-	"microchip,sam9x60-i2c".
-- scl-gpios: specify the gpio related to SCL pin
-- sda-gpios: specify the gpio related to SDA pin
-- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
-  bus recovery, call it "gpio" state
-- Child nodes conforming to i2c bus binding
-
-
-Examples :
-
-i2c0: i2c@fff84000 {
-	compatible = "atmel,at91sam9g20-i2c";
-	reg = <0xfff84000 0x100>;
-	interrupts = <12 4 6>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&twi0_clk>;
-	clock-frequency = <400000>;
-
-	24c512@50 {
-		compatible = "atmel,24c512";
-		reg = <0x50>;
-		pagesize = <128>;
-	}
-}
-
-i2c0: i2c@f8034600 {
-	compatible = "atmel,sama5d2-i2c";
-	reg = <0xf8034600 0x100>;
-	interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-	dmas = <&dma0
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-		AT91_XDMAC_DT_PERID(11)>,
-	       <&dma0
-		(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-		AT91_XDMAC_DT_PERID(12)>;
-	dma-names = "tx", "rx";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	clocks = <&flx0>;
-	atmel,fifo-size = <16>;
-	i2c-sda-hold-time-ns = <336>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c0>;
-	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
-	scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	wm8731: wm8731@1a {
-		compatible = "wm8731";
-		reg = <0x1a>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
deleted file mode 100644
index 3b30e54ae3c7..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Energymicro efm32 i2c controller
-
-Required properties :
-
- - reg : Offset and length of the register set for the device
- - compatible : should be "energymicro,efm32-i2c"
- - interrupts : the interrupt number
- - clocks : reference to the module clock
-
-Recommended properties :
-
- - clock-frequency : maximal I2C bus clock frequency in Hz.
- - energymicro,location : Decides the location of the USART I/O pins.
-   Allowed range : [0 .. 6]
-
-Example:
-	i2c0: i2c@4000a000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "energymicro,efm32-i2c";
-		reg = <0x4000a000 0x400>;
-		interrupts = <9>;
-		clocks = <&cmu clk_HFPERCLKI2C0>;
-		clock-frequency = <100000>;
-		energymicro,location = <3>;
-
-		eeprom@50 {
-			compatible = "microchip,24c02";
-			reg = <0x50>;
-			pagesize = <16>;
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt b/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
deleted file mode 100644
index 2dbc0b62daa6..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Samsung's High Speed I2C controller
-
-The Samsung's High Speed I2C controller is used to interface with I2C devices
-at various speeds ranging from 100khz to 3.4Mhz.
-
-Required properties:
-  - compatible: value should be.
-	-> "samsung,exynos5-hsi2c", (DEPRECATED)
-				for i2c compatible with HSI2C available
-				on Exynos5250 and Exynos5420 SoCs.
-	-> "samsung,exynos5250-hsi2c", for i2c compatible with HSI2C available
-				on Exynos5250 and Exynos5420 SoCs.
-	-> "samsung,exynos5260-hsi2c", for i2c compatible with HSI2C available
-				on Exynos5260 SoCs.
-	-> "samsung,exynos7-hsi2c", for i2c compatible with HSI2C available
-				on Exynos7 SoCs.
-
-  - reg: physical base address of the controller and length of memory mapped
-    region.
-  - interrupts: interrupt number to the cpu.
-  - #address-cells: always 1 (for i2c addresses)
-  - #size-cells: always 0
-
-  - Pinctrl:
-    - pinctrl-0: Pin control group to be used for this controller.
-    - pinctrl-names: Should contain only one value - "default".
-
-Optional properties:
-  - clock-frequency: Desired operating frequency in Hz of the bus.
-    -> If not specified, the bus operates in fast-speed mode at
-       at 100khz.
-    -> If specified, the bus operates in high-speed mode only if the
-       clock-frequency is >= 1Mhz.
-
-Example:
-
-hsi2c@12ca0000 {
-	compatible = "samsung,exynos5250-hsi2c";
-	reg = <0x12ca0000 0x100>;
-	interrupts = <56>;
-	clock-frequency = <100000>;
-
-	pinctrl-0 = <&i2c4_bus>;
-	pinctrl-names = "default";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
new file mode 100644
index 000000000000..3e52a0db6c41
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-exynos5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung's High Speed I2C controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung's High Speed I2C controller is used to interface with I2C devices
+  at various speeds ranging from 100kHz to 3.4MHz.
+
+  In case the HSI2C controller is encapsulated within USI block (it's the case
+  e.g. for Exynos850 and Exynos Auto V9 SoCs), it might be also necessary to
+  define USI node in device tree file, choosing "i2c" configuration. Please see
+  Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml for details.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5250-hsi2c    # Exynos5250 and Exynos5420
+          - samsung,exynos5260-hsi2c    # Exynos5260
+          - samsung,exynos7-hsi2c       # Exynos7
+          - samsung,exynosautov9-hsi2c  # ExynosAutoV9 and Exynos850
+      - const: samsung,exynos5-hsi2c    # Exynos5250 and Exynos5420
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+    description:
+      Desired operating frequency in Hz of the bus.
+
+      If not specified, the bus operates in fast-speed mode at 100kHz.
+
+      If specified, the bus operates in high-speed mode only if the
+      clock-frequency is >= 1MHz.
+
+  clocks:
+    minItems: 1
+    items:
+      - description: I2C operating clock
+      - description: Bus clock (APB)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: hsi2c
+      - const: hsi2c_pclk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynosautov9-hsi2c
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+      required:
+        - clock-names
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    hsi2c_8: i2c@12e00000 {
+        compatible = "samsung,exynos5250-hsi2c";
+        reg = <0x12e00000 0x1000>;
+        interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-frequency = <100000>;
+        clocks = <&clock CLK_USI4>;
+        clock-names = "hsi2c";
+
+        pmic@66 {
+            /* compatible = "samsung,s2mps11-pmic"; */
+            reg = <0x66>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/exynos850.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    hsi2c_2: i2c@138c0000 {
+        compatible = "samsung,exynosautov9-hsi2c";
+        reg = <0x138c0000 0xc0>;
+        interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>,
+                 <&cmu_peri CLK_GOUT_HSI2C2_PCLK>;
+        clock-names = "hsi2c", "hsi2c_pclk";
+
+        pmic@66 {
+            /* compatible = "samsung,s2mps11-pmic"; */
+            reg = <0x66>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gate.yaml b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
index 66472f12a7e2..0cdc3e890df7 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-gate.yaml
@@ -31,9 +31,8 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         ak8975@c {
-            compatible = "ak,ak8975";
+            compatible = "asahi-kasei,ak8975";
             reg = <0x0c>;
         };
     };
 ...
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
index fd040284561f..afd4925c2a7d 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for GPIO bitbanged I2C
+title: GPIO bitbanged I2C
 
 maintainers:
   - Wolfram Sang <wsa@kernel.org>
@@ -33,6 +33,10 @@ properties:
       open drain.
     maxItems: 1
 
+  i2c-gpio,sda-output-only:
+    description: sda as output only
+    type: boolean
+
   i2c-gpio,scl-output-only:
     description: scl as output only
     type: boolean
@@ -63,6 +67,28 @@ properties:
       GPIO line used for SCL into open drain mode, and that something is not
       the GPIO chip. It is essentially an inconsistency flag.
 
+  i2c-gpio,sda-has-no-pullup:
+    type: boolean
+    description: sda is used in a non-compliant way and has no pull-up.
+      Therefore disable open-drain. This property is mutually-exclusive
+      with i2c-gpio,sda-open-drain.
+
+  i2c-gpio,scl-has-no-pullup:
+    type: boolean
+    description: scl is used in a non-compliant way and has no pull-up.
+      Therefore disable open-drain. This property is mutually-exclusive
+      with i2c-gpio,scl-open-drain.
+
+dependencies:
+  i2c-gpio,sda-has-no-pullup:
+    not:
+      required:
+        - i2c-gpio,sda-open-drain
+  i2c-gpio,scl-has-no-pullup:
+    not:
+      required:
+        - i2c-gpio,scl-open-drain
+
 required:
   - compatible
   - sda-gpios
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
index 29b9447f3b84..4656f5112b84 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml
@@ -17,9 +17,13 @@ properties:
     oneOf:
       - enum:
           - fsl,imx7ulp-lpi2c
-          - fsl,imx8qm-lpi2c
       - items:
-          - const: fsl,imx8qxp-lpi2c
+          - enum:
+              - fsl,imx8qxp-lpi2c
+              - fsl,imx8dxl-lpi2c
+              - fsl,imx8qm-lpi2c
+              - fsl,imx8ulp-lpi2c
+              - fsl,imx93-lpi2c
           - const: fsl,imx7ulp-lpi2c
 
   reg:
@@ -34,10 +38,22 @@ properties:
   clock-frequency: true
 
   clock-names:
-    maxItems: 1
+    items:
+      - const: per
+      - const: ipg
 
   clocks:
-    maxItems: 1
+    maxItems: 2
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for TX
+      - description: DMA controller phandle and request line for RX
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
 
   power-domains:
     maxItems: 1
@@ -60,5 +76,6 @@ examples:
         reg = <0x40A50000 0x10000>;
         interrupt-parent = <&intc>;
         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&clks IMX7ULP_CLK_LPI2C7>;
+        clocks = <&clks IMX7ULP_CLK_LPI2C7>,
+                 <&clks IMX7ULP_CLK_NIC1_BUS_DIV>;
     };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
index 3592d49235e0..85ee1282d6d2 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
@@ -19,6 +19,17 @@ properties:
       - const: fsl,imx21-i2c
       - const: fsl,vf610-i2c
       - items:
+          - enum:
+              - fsl,ls1012a-i2c
+              - fsl,ls1021a-i2c
+              - fsl,ls1028a-i2c
+              - fsl,ls1043a-i2c
+              - fsl,ls1046a-i2c
+              - fsl,ls1088a-i2c
+              - fsl,ls208xa-i2c
+              - fsl,lx2160a-i2c
+          - const: fsl,vf610-i2c
+      - items:
           - const: fsl,imx35-i2c
           - const: fsl,imx1-i2c
       - items:
@@ -57,7 +68,9 @@ properties:
     const: ipg
 
   clock-frequency:
-    enum: [ 100000, 400000 ]
+    minimum: 1
+    default: 100000
+    maximum: 400000
 
   dmas:
     items:
@@ -86,9 +99,7 @@ unevaluatedProperties: false
 examples:
   - |
     #include <dt-bindings/clock/imx5-clock.h>
-    #include <dt-bindings/clock/vf610-clock.h>
-    #include <dt-bindings/gpio/gpio.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
 
     i2c@83fc4000 {
         compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
@@ -97,6 +108,9 @@ examples:
         clocks = <&clks IMX5_CLK_I2C2_GATE>;
     };
 
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+
     i2c@40066000 {
         compatible = "fsl,vf610-i2c";
         reg = <0x40066000 0x1000>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
index 98c6fcf7bf26..70fb69b923c4 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml
@@ -43,6 +43,7 @@ properties:
 
   fsl,timeout:
     $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
     description: |
       I2C bus timeout in microseconds
 
@@ -73,6 +74,7 @@ examples:
         clock-frequency = <100000>;
     };
 
+  - |
     /* MPC5200B based board */
     i2c@3d00 {
         #address-cells = <1>;
@@ -84,6 +86,7 @@ examples:
         fsl,preserve-clocking;
     };
 
+  - |
     /* MPC8544 base board */
     i2c@3100 {
         #address-cells = <1>;
@@ -93,6 +96,6 @@ examples:
         interrupts = <43 2>;
         interrupt-parent = <&mpic>;
         clock-frequency = <400000>;
-        fsl,timeout = <10000>;
+        i2c-scl-clk-low-timeout-us = <10000>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
deleted file mode 100644
index 5ea216ae7084..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* MediaTek's I2C controller
-
-The MediaTek's I2C controller is used to interface with I2C devices.
-
-Required properties:
-  - compatible: value should be either of the following.
-      "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701
-      "mediatek,mt2712-i2c": for MediaTek MT2712
-      "mediatek,mt6577-i2c": for MediaTek MT6577
-      "mediatek,mt6589-i2c": for MediaTek MT6589
-      "mediatek,mt6797-i2c", "mediatek,mt6577-i2c": for MediaTek MT6797
-      "mediatek,mt7622-i2c": for MediaTek MT7622
-      "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
-      "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
-      "mediatek,mt8173-i2c": for MediaTek MT8173
-      "mediatek,mt8183-i2c": for MediaTek MT8183
-      "mediatek,mt8192-i2c": for MediaTek MT8192
-      "mediatek,mt8195-i2c", "mediatek,mt8192-i2c": for MediaTek MT8195
-      "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516
-  - reg: physical base address of the controller and dma base, length of memory
-    mapped region.
-  - interrupts: interrupt number to the cpu.
-  - clock-div: the fixed value for frequency divider of clock source in i2c
-    module. Each IC may be different.
-  - clocks: clock name from clock manager
-  - clock-names: Must include "main" and "dma", "arb" is for multi-master that
-    one bus has more than two i2c controllers, if enable have-pmic need include
-    "pmic" extra.
-
-Optional properties:
-  - clock-frequency: Frequency in Hz of the bus when transfer, the default value
-    is 100000.
-  - mediatek,have-pmic: platform can control i2c form special pmic side.
-    Only mt6589 and mt8135 support this feature.
-  - mediatek,use-push-pull: IO config use push-pull mode.
-  - vbus-supply: phandle to the regulator that provides power to SCL/SDA.
-
-Example:
-
-	i2c0: i2c@1100d000 {
-			compatible = "mediatek,mt6577-i2c";
-			reg = <0x1100d000 0x70>,
-			      <0x11000300 0x80>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
-			clock-frequency = <400000>;
-			mediatek,have-pmic;
-			clock-div = <16>;
-			clocks = <&i2c0_ck>, <&ap_dma_ck>;
-			clock-names = "main", "dma";
-	};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
new file mode 100644
index 000000000000..fda0467cdd95
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mt65xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek I2C controller
+
+description:
+  This driver interfaces with the native I2C controller present in
+  various MediaTek SoCs.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+maintainers:
+  - Qii Wang <qii.wang@mediatek.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt2712-i2c
+      - const: mediatek,mt6577-i2c
+      - const: mediatek,mt6589-i2c
+      - const: mediatek,mt7622-i2c
+      - const: mediatek,mt7981-i2c
+      - const: mediatek,mt7986-i2c
+      - const: mediatek,mt8168-i2c
+      - const: mediatek,mt8173-i2c
+      - const: mediatek,mt8183-i2c
+      - const: mediatek,mt8186-i2c
+      - const: mediatek,mt8188-i2c
+      - const: mediatek,mt8192-i2c
+      - items:
+          - enum:
+              - mediatek,mt7629-i2c
+              - mediatek,mt8516-i2c
+          - const: mediatek,mt2712-i2c
+      - items:
+          - enum:
+              - mediatek,mt2701-i2c
+              - mediatek,mt6797-i2c
+              - mediatek,mt7623-i2c
+          - const: mediatek,mt6577-i2c
+      - items:
+          - enum:
+              - mediatek,mt8365-i2c
+          - const: mediatek,mt8168-i2c
+      - items:
+          - enum:
+              - mediatek,mt6795-i2c
+          - const: mediatek,mt8173-i2c
+      - items:
+          - enum:
+              - mediatek,mt8195-i2c
+          - const: mediatek,mt8192-i2c
+
+  reg:
+    items:
+      - description: Physical base address
+      - description: DMA base address
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: Main clock for I2C bus
+      - description: Clock for I2C via DMA
+      - description: Bus arbitrator clock
+      - description: Clock for I2C from PMIC
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: main
+      - const: dma
+      - const: arb
+      - const: pmic
+
+  clock-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Frequency divider of clock source in I2C module
+
+  clock-frequency:
+    default: 100000
+    description:
+      SCL frequency to use (in Hz). If omitted, 100kHz is used.
+
+  mediatek,have-pmic:
+    description: Platform controls I2C from PMIC side
+    type: boolean
+
+  mediatek,use-push-pull:
+    description: Use push-pull mode I/O config
+    type: boolean
+
+  vbus-supply:
+    description: Phandle to the regulator providing power to SCL/SDA
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-div
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0: i2c@1100d000 {
+      compatible = "mediatek,mt6577-i2c";
+      reg = <0x1100d000 0x70>, <0x11000300 0x80>;
+      interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+      clocks = <&i2c0_ck>, <&ap_dma_ck>;
+      clock-names = "main", "dma";
+      clock-div = <16>;
+      clock-frequency = <400000>;
+      mediatek,have-pmic;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt7621.txt b/Documentation/devicetree/bindings/i2c/i2c-mt7621.txt
deleted file mode 100644
index bc36f0eb94cd..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mt7621.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-MediaTek MT7621/MT7628 I2C master controller
-
-Required properties:
-
-- compatible: Should be one of the following:
-  - "mediatek,mt7621-i2c": for MT7621/MT7628/MT7688 platforms
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-- reg: Address and length of the register set for the device
-- resets: phandle to the reset controller asserting this device in
-          reset
-  See ../reset/reset.txt for details.
-
-Optional properties :
-
-Example:
-
-i2c: i2c@900 {
-	compatible = "mediatek,mt7621-i2c";
-	reg = <0x900 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	resets = <&rstctrl 16>;
-	reset-names = "i2c";
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
deleted file mode 100644
index d4cf10582a26..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-GPIO-based I2C Bus Mux
-
-This binding describes an I2C bus multiplexer that uses GPIOs to
-route the I2C signals.
-
-                                  +-----+  +-----+
-                                  | dev |  | dev |
-    +------------+                +-----+  +-----+
-    | SoC        |                   |        |
-    |            |          /--------+--------+
-    |   +------+ |  +------+    child bus A, on GPIO value set to 0
-    |   | I2C  |-|--| Mux  |
-    |   +------+ |  +--+---+    child bus B, on GPIO value set to 1
-    |            |     |    \----------+--------+--------+
-    |   +------+ |     |               |        |        |
-    |   | GPIO |-|-----+            +-----+  +-----+  +-----+
-    |   +------+ |                  | dev |  | dev |  | dev |
-    +------------+                  +-----+  +-----+  +-----+
-
-Required properties:
-- compatible: i2c-mux-gpio
-- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
-  port is connected to.
-- mux-gpios: list of gpios used to control the muxer
-* Standard I2C mux properties. See i2c-mux.yaml in this directory.
-* I2C child bus nodes. See i2c-mux.yaml in this directory.
-
-Optional properties:
-- idle-state: value to set the muxer to when idle. When no value is
-  given, it defaults to the last value used.
-
-For each i2c child node, an I2C child bus will be created. They will
-be numbered based on their order in the device tree.
-
-Whenever an access is made to a device on a child bus, the value set
-in the relevant node's reg property will be output using the list of
-GPIOs, the first in the list holding the least-significant value.
-
-If an idle state is defined, using the idle-state (optional) property,
-whenever an access is not being made to a device on a child bus, the
-GPIOs will be set according to the idle value.
-
-If an idle state is not defined, the most recently used value will be
-left programmed into hardware whenever no access is being made to a
-device on a child bus.
-
-Example:
-	i2cmux {
-		compatible = "i2c-mux-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
-		i2c-parent = <&i2c1>;
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			ssd1307: oled@3c {
-				compatible = "solomon,ssd1307fb-i2c";
-				reg = <0x3c>;
-				pwms = <&pwm 4 3000>;
-				reset-gpios = <&gpio2 7 1>;
-			};
-		};
-
-		i2c@3 {
-			reg = <3>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			pca9555: pca9555@20 {
-				compatible = "nxp,pca9555";
-				gpio-controller;
-				#gpio-cells = <2>;
-				reg = <0x20>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
new file mode 100644
index 000000000000..f34cc7ad5a00
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-based I2C Bus Mux
+
+maintainers:
+  - Wolfram Sang <wsa@kernel.org>
+
+description: |
+  This binding describes an I2C bus multiplexer that uses GPIOs to route the I2C signals.
+
+                                  +-----+  +-----+
+                                  | dev |  | dev |
+    +------------+                +-----+  +-----+
+    | SoC        |                   |        |
+    |            |          /--------+--------+
+    |   +------+ |  +------+    child bus A, on GPIO value set to 0
+    |   | I2C  |-|--| Mux  |
+    |   +------+ |  +--+---+    child bus B, on GPIO value set to 1
+    |            |     |    \----------+--------+--------+
+    |   +------+ |     |               |        |        |
+    |   | GPIO |-|-----+            +-----+  +-----+  +-----+
+    |   +------+ |                  | dev |  | dev |  | dev |
+    +------------+                  +-----+  +-----+  +-----+
+
+  For each I2C child node, an I2C child bus will be created. They will be numbered based on their
+  order in the device tree.
+
+  Whenever an access is made to a device on a child bus, the value set in the relevant node's reg
+  property will be output using the list of GPIOs, the first in the list holding the least-
+  significant value.
+
+  If an idle state is defined, using the idle-state (optional) property, whenever an access is not
+  being made to a device on a child bus, the GPIOs will be set according to the idle value.
+
+  If an idle state is not defined, the most recently used value will be left programmed into
+  hardware whenever no access is being made to a device on a child bus.
+
+properties:
+  compatible:
+    const: i2c-mux-gpio
+
+  i2c-parent:
+    description: phandle of the I2C bus that this multiplexer's master-side port is connected to
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  mux-gpios:
+    description: list of GPIOs used to control the muxer
+    minItems: 1
+    maxItems: 4  # Should be enough
+
+  idle-state:
+    description: Value to set the muxer to when idle. When no value is given, it defaults to the
+      last value used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+allOf:
+  - $ref: i2c-mux.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - i2c-parent
+  - mux-gpios
+
+examples:
+  - |
+    i2cmux {
+      compatible = "i2c-mux-gpio";
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mux-gpios = <&gpio1 22 0>, <&gpio1 23 0>;
+      i2c-parent = <&i2c1>;
+
+      i2c@1 {
+        reg = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ssd1307: oled@3c {
+          compatible = "solomon,ssd1307fb-i2c";
+          reg = <0x3c>;
+          pwms = <&pwm 4 3000>;
+          reset-gpios = <&gpio2 7 1>;
+        };
+      };
+
+      i2c@3 {
+        reg = <3>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pca9555: pca9555@20 {
+          compatible = "nxp,pca9555";
+          gpio-controller;
+          #gpio-cells = <2>;
+          reg = <0x20>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
index 9b0603a72f40..b6af924dee2e 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
@@ -28,7 +28,6 @@ description: |+
       '------------'                  '-----'  '-----'  '-----'
 
 
-
 allOf:
   - $ref: /schemas/i2c/i2c-mux.yaml#
 
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
deleted file mode 100644
index 997a287ed3f6..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Pinctrl-based I2C Bus Mux
-
-This binding describes an I2C bus multiplexer that uses pin multiplexing to
-route the I2C signals, and represents the pin multiplexing configuration
-using the pinctrl device tree bindings.
-
-                                 +-----+  +-----+
-                                 | dev |  | dev |
-    +------------------------+   +-----+  +-----+
-    | SoC                    |      |        |
-    |                   /----|------+--------+
-    |   +---+   +------+     | child bus A, on first set of pins
-    |   |I2C|---|Pinmux|     |
-    |   +---+   +------+     | child bus B, on second set of pins
-    |                   \----|------+--------+--------+
-    |                        |      |        |        |
-    +------------------------+  +-----+  +-----+  +-----+
-                                | dev |  | dev |  | dev |
-                                +-----+  +-----+  +-----+
-
-Required properties:
-- compatible: i2c-mux-pinctrl
-- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
-  port is connected to.
-
-Also required are:
-
-* Standard pinctrl properties that specify the pin mux state for each child
-  bus. See ../pinctrl/pinctrl-bindings.txt.
-
-* Standard I2C mux properties. See i2c-mux.yaml in this directory.
-
-* I2C child bus nodes. See i2c-mux.yaml in this directory.
-
-For each named state defined in the pinctrl-names property, an I2C child bus
-will be created. I2C child bus numbers are assigned based on the index into
-the pinctrl-names property.
-
-The only exception is that no bus will be created for a state named "idle". If
-such a state is defined, it must be the last entry in pinctrl-names. For
-example:
-
-	pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
-	pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
-	pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
-
-Whenever an access is made to a device on a child bus, the relevant pinctrl
-state will be programmed into hardware.
-
-If an idle state is defined, whenever an access is not being made to a device
-on a child bus, the idle pinctrl state will be programmed into hardware.
-
-If an idle state is not defined, the most recently used pinctrl state will be
-left programmed into hardware whenever no access is being made of a device on
-a child bus.
-
-Example:
-
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&i2c1>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			eeprom {
-				compatible = "eeprom";
-				reg = <0x50>;
-			};
-		};
-
-		i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			eeprom {
-				compatible = "eeprom";
-				reg = <0x50>;
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml
new file mode 100644
index 000000000000..2e3d555eb96c
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/i2c-mux-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pinctrl-based I2C Bus Mux
+
+maintainers:
+  - Wolfram Sang <wsa@kernel.org>
+
+description: |
+  This binding describes an I2C bus multiplexer that uses pin multiplexing to route the I2C
+  signals, and represents the pin multiplexing configuration using the pinctrl device tree
+  bindings.
+
+                                 +-----+  +-----+
+                                 | dev |  | dev |
+    +------------------------+   +-----+  +-----+
+    | SoC                    |      |        |
+    |                   /----|------+--------+
+    |   +---+   +------+     | child bus A, on first set of pins
+    |   |I2C|---|Pinmux|     |
+    |   +---+   +------+     | child bus B, on second set of pins
+    |                   \----|------+--------+--------+
+    |                        |      |        |        |
+    +------------------------+  +-----+  +-----+  +-----+
+                                | dev |  | dev |  | dev |
+                                +-----+  +-----+  +-----+
+
+  For each named state defined in the pinctrl-names property, an I2C child bus will be created.
+  I2C child bus numbers are assigned based on the index into the pinctrl-names property.
+
+  The only exception is that no bus will be created for a state named "idle". If such a state is
+  defined, it must be the last entry in pinctrl-names. For example:
+
+    pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
+    pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
+    pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
+
+  Whenever an access is made to a device on a child bus, the relevant pinctrl state will be
+  programmed into hardware.
+
+  If an idle state is defined, whenever an access is not being made to a device on a child bus,
+  the idle pinctrl state will be programmed into hardware.
+
+  If an idle state is not defined, the most recently used pinctrl state will be left programmed
+  into hardware whenever no access is being made of a device on a child bus.
+
+properties:
+  compatible:
+    const: i2c-mux-pinctrl
+
+  i2c-parent:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of the I2C bus that this multiplexer's master-side port is connected
+      to.
+
+allOf:
+  - $ref: i2c-mux.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - i2c-parent
+
+examples:
+  - |
+    i2cmux {
+      compatible = "i2c-mux-pinctrl";
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      i2c-parent = <&i2c1>;
+
+      pinctrl-names = "ddc", "pta", "idle";
+      pinctrl-0 = <&state_i2cmux_ddc>;
+      pinctrl-1 = <&state_i2cmux_pta>;
+      pinctrl-2 = <&state_i2cmux_idle>;
+
+      i2c@0 {
+        reg = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@50 {
+          compatible = "atmel,24c02";
+          reg = <0x50>;
+        };
+      };
+
+      i2c@1 {
+        reg = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@50 {
+          compatible = "atmel,24c02";
+          reg = <0x50>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt b/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
deleted file mode 100644
index 72065b0ff680..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-I2C for Nomadik based systems
-
-Required (non-standard) properties:
- - Nil
-
-Recommended (non-standard) properties:
- - clock-frequency : Maximum bus clock frequency for the device
-
-Optional (non-standard) properties:
- - Nil
-
-Example :
-
-i2c@80004000 {
-        compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
-        reg = <0x80004000 0x1000>;
-        interrupts = <0 21 0x4>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-        v-i2c-supply = <&db8500_vape_reg>;
-
-        clock-frequency = <400000>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
deleted file mode 100644
index a37c9455b244..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Device tree configuration for i2c-ocores
-
-Required properties:
-- compatible      : "opencores,i2c-ocores"
-                    "aeroflexgaisler,i2cmst"
-                    "sifive,fu540-c000-i2c", "sifive,i2c0"
-                    For Opencore based I2C IP block reimplemented in
-                    FU540-C000 SoC.
-                    "sifive,fu740-c000-i2c", "sifive,i2c0"
-                    For Opencore based I2C IP block reimplemented in
-                    FU740-C000 SoC.
-                    Please refer to sifive-blocks-ip-versioning.txt for
-                    additional details.
-- reg             : bus address start and address range size of device
-- clocks          : handle to the controller clock; see the note below.
-                    Mutually exclusive with opencores,ip-clock-frequency
-- opencores,ip-clock-frequency: frequency of the controller clock in Hz;
-                    see the note below. Mutually exclusive with clocks
-- #address-cells  : should be <1>
-- #size-cells     : should be <0>
-
-Optional properties:
-- interrupts      : interrupt number.
-- clock-frequency : frequency of bus clock in Hz; see the note below.
-                    Defaults to 100 KHz when the property is not specified
-- reg-shift       : device register offsets are shifted by this value
-- reg-io-width    : io register width in bytes (1, 2 or 4)
-- regstep         : deprecated, use reg-shift above
-
-Note
-clock-frequency property is meant to control the bus frequency for i2c bus
-drivers, but it was incorrectly used to specify i2c controller input clock
-frequency. So the following rules are set to fix this situation:
-- if clock-frequency is present and neither opencores,ip-clock-frequency nor
-  clocks are, then clock-frequency specifies i2c controller clock frequency.
-  This is to keep backwards compatibility with setups using old DTB. i2c bus
-  frequency is fixed at 100 KHz.
-- if clocks is present it specifies i2c controller clock. clock-frequency
-  property specifies i2c bus frequency.
-- if opencores,ip-clock-frequency is present it specifies i2c controller
-  clock frequency. clock-frequency property specifies i2c bus frequency.
-
-Examples:
-
-	i2c0: ocores@a0000000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "opencores,i2c-ocores";
-		reg = <0xa0000000 0x8>;
-		interrupts = <10>;
-		opencores,ip-clock-frequency = <20000000>;
-
-		reg-shift = <0>;	/* 8 bit registers */
-		reg-io-width = <1>;	/* 8 bit read/write */
-
-		dummy@60 {
-			compatible = "dummy";
-			reg = <0x60>;
-		};
-	};
-or
-	i2c0: ocores@a0000000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "opencores,i2c-ocores";
-		reg = <0xa0000000 0x8>;
-		interrupts = <10>;
-		clocks = <&osc>;
-		clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
-
-		reg-shift = <0>;	/* 8 bit registers */
-		reg-io-width = <1>;	/* 8 bit read/write */
-
-		dummy@60 {
-			compatible = "dummy";
-			reg = <0x60>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
index 015885dd02d3..31386a8d7684 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-pxa.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/i2c-pxa.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell MMP I2C controller bindings
+title: Marvell MMP I2C controller
 
 maintainers:
   - Rob Herring <robh+dt@kernel.org>
diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
deleted file mode 100644
index 7b9fc0c22eaf..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Qualcomm Camera Control Interface (CCI) I2C controller
-
-PROPERTIES:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		"qcom,msm8916-cci"
-		"qcom,msm8996-cci"
-		"qcom,sdm845-cci"
-		"qcom,sm8250-cci"
-
-- reg
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: base address CCI I2C controller and length of memory
-		    mapped region.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: specifies the CCI I2C interrupt. The format of the
-		    specifier is defined by the binding document describing
-		    the node's interrupt parent.
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: a list of phandle, should contain an entry for each
-		    entries in clock-names.
-
-- clock-names
-	Usage: required
-	Value type: <string>
-	Definition: a list of clock names, must include "cci" clock.
-
-- power-domains
-	Usage: required for "qcom,msm8996-cci"
-	Value type: <prop-encoded-array>
-	Definition:
-
-SUBNODES:
-
-The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996,
-sdm845 and sm8250), described as subdevices named "i2c-bus@0" and "i2c-bus@1".
-
-PROPERTIES:
-
-- reg:
-	Usage: required
-	Value type: <u32>
-	Definition: Index of the CCI bus/master
-
-- clock-frequency:
-	Usage: optional
-	Value type: <u32>
-	Definition: Desired I2C bus clock frequency in Hz, defaults to 100
-		    kHz if omitted.
-
-Example:
-
-	cci@a0c000 {
-		compatible = "qcom,msm8996-cci";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0xa0c000 0x1000>;
-		interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
-			 <&mmcc CAMSS_TOP_AHB_CLK>,
-			 <&mmcc CAMSS_CCI_AHB_CLK>,
-			 <&mmcc CAMSS_CCI_CLK>,
-			 <&mmcc CAMSS_AHB_CLK>;
-		clock-names = "mmss_mmagic_ahb",
-			      "camss_top_ahb",
-			      "cci_ahb",
-			      "cci",
-			      "camss_ahb";
-
-		i2c-bus@0 {
-			reg = <0>;
-			clock-frequency = <400000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c-bus@1 {
-			reg = <1>;
-			clock-frequency = <400000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
index 5339dd4fc370..82b9d6682297 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml
@@ -29,6 +29,7 @@ properties:
       - items:
           - enum:
               - rockchip,rk3036-i2c
+              - rockchip,rk3128-i2c
               - rockchip,rk3368-i2c
           - const: rockchip,rk3288-i2c
       - items:
@@ -37,6 +38,8 @@ properties:
               - rockchip,rk3308-i2c
               - rockchip,rk3328-i2c
               - rockchip,rk3568-i2c
+              - rockchip,rk3588-i2c
+              - rockchip,rv1126-i2c
           - const: rockchip,rk3399-i2c
 
   reg:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
deleted file mode 100644
index 66ae46d3bc2f..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Samsung's I2C controller
-
-The Samsung's I2C controller is used to interface with I2C devices.
-
-Required properties:
-  - compatible: value should be either of the following.
-      (a) "samsung, s3c2410-i2c", for i2c compatible with s3c2410 i2c.
-      (b) "samsung, s3c2440-i2c", for i2c compatible with s3c2440 i2c.
-      (c) "samsung, s3c2440-hdmiphy-i2c", for s3c2440-like i2c used
-          inside HDMIPHY block found on several samsung SoCs
-      (d) "samsung, exynos5-sata-phy-i2c", for s3c2440-like i2c used as
-	   a host to SATA PHY controller on an internal bus.
-  - reg: physical base address of the controller and length of memory mapped
-    region.
-  - interrupts: interrupt number to the cpu.
-  - samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
-
-Required for all cases except "samsung,s3c2440-hdmiphy-i2c":
-  - Samsung GPIO variant (deprecated):
-    - gpios: The order of the gpios should be the following: <SDA, SCL>.
-      The gpio specifier depends on the gpio controller. Required in all
-      cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
-      lines are permanently wired to the respective clienta
-  - Pinctrl variant (preferred, if available):
-    - pinctrl-0: Pin control group to be used for this controller.
-    - pinctrl-names: Should contain only one value - "default".
-
-Optional properties:
-  - samsung,i2c-slave-addr: Slave address in multi-master environment. If not
-    specified, default value is 0.
-  - samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
-    specified, the default value in Hz is 100000.
-  - samsung,sysreg-phandle - handle to syscon used to control the system registers
-
-Example:
-
-	i2c@13870000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13870000 0x100>;
-		interrupts = <345>;
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <100000>;
-		/* Samsung GPIO variant begins here */
-		gpios = <&gpd1 2 0 /* SDA */
-			 &gpd1 3 0 /* SCL */>;
-		/* Samsung GPIO variant ends here */
-		/* Pinctrl variant begins here */
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		/* Pinctrl variant ends here */
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		wm8994@1a {
-			compatible = "wlf,wm8994";
-			reg = <0x1a>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-st.txt b/Documentation/devicetree/bindings/i2c/i2c-st.txt
deleted file mode 100644
index 4c26fda3844a..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-st.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-ST SSC binding, for I2C mode operation
-
-Required properties :
-- compatible : Must be "st,comms-ssc-i2c" or "st,comms-ssc4-i2c"
-- reg : Offset and length of the register set for the device
-- interrupts : the interrupt specifier
-- clock-names: Must contain "ssc".
-- clocks: Must contain an entry for each name in clock-names. See the common
-  clock bindings.
-- A pinctrl state named "default" must be defined to set pins in mode of
-  operation for I2C transfer.
-
-Optional properties :
-- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified,
-  the default 100 kHz frequency will be used. As only Normal and Fast modes
-  are supported, possible values are 100000 and 400000.
-- st,i2c-min-scl-pulse-width-us : The minimum valid SCL pulse width that is
-  allowed through the deglitch circuit. In units of us.
-- st,i2c-min-sda-pulse-width-us : The minimum valid SDA pulse width that is
-  allowed through the deglitch circuit. In units of us.
-- A pinctrl state named "idle" could be defined to set pins in idle state
-  when I2C instance is not performing a transfer.
-- A pinctrl state named "sleep" could be defined to set pins in sleep state
-  when driver enters in suspend.
-
-
-
-Example :
-
-i2c0: i2c@fed40000 {
-	compatible	= "st,comms-ssc4-i2c";
-	reg		= <0xfed40000 0x110>;
-	interrupts	=  <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-	clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
-	clock-names	= "ssc";
-	clock-frequency = <400000>;
-	pinctrl-names	= "default";
-	pinctrl-0	= <&pinctrl_i2c0_default>;
-	st,i2c-min-scl-pulse-width-us = <0>;
-	st,i2c-min-sda-pulse-width-us = <5>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-synquacer.txt b/Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
deleted file mode 100644
index 72f4a2f0fedc..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-synquacer.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Socionext SynQuacer I2C
-
-Required properties:
-- compatible      : Must be "socionext,synquacer-i2c"
-- reg             : Offset and length of the register set for the device
-- interrupts      : A single interrupt specifier
-- #address-cells  : Must be <1>;
-- #size-cells     : Must be <0>;
-- clock-names     : Must contain "pclk".
-- clocks          : Must contain an entry for each name in clock-names.
-                    (See the common clock bindings.)
-
-Optional properties:
-- clock-frequency : Desired I2C bus clock frequency in Hz. As only Normal and
-                    Fast modes are supported, possible values are 100000 and
-                    400000.
-
-Example :
-
-    i2c@51210000 {
-        compatible = "socionext,synquacer-i2c";
-        reg = <0x51210000 0x1000>;
-        interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-        clock-names = "pclk";
-        clocks = <&clk_i2c>;
-        clock-frequency = <400000>;
-    };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-versatile.txt b/Documentation/devicetree/bindings/i2c/i2c-versatile.txt
deleted file mode 100644
index 361d31c51b6f..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-versatile.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-i2c Controller on ARM Versatile platform:
-
-Required properties:
-- compatible : Must be "arm,versatile-i2c";
-- reg
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
diff --git a/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt b/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt
deleted file mode 100644
index f818ef507ab7..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Device tree configuration for the I2C controller on the XLP9xx/5xx SoC
-
-Required properties:
-- compatible      : should be "netlogic,xlp980-i2c"
-- reg             : bus address start and address range size of device
-- interrupts      : interrupt number
-
-Optional properties:
-- clock-frequency : frequency of bus clock in Hz
-                    Defaults to 100 KHz when the property is not specified
-
-Example:
-
-i2c0: i2c@113100 {
-	compatible = "netlogic,xlp980-i2c";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0 0x113100 0x100>;
-	clock-frequency = <400000>;
-	interrupts = <30>;
-	interrupt-parent = <&pic>;
-};
diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
index b864916e087f..fc3dd7ec0445 100644
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -95,6 +95,10 @@ wants to support one of the below features, it should adapt these bindings.
 - smbus-alert
 	states that the optional SMBus-Alert feature apply to this bus.
 
+- mctp-controller
+	indicates that the system is accessible via this bus as an endpoint for
+	MCTP over I2C transport.
+
 Required properties (per child device)
 --------------------------------------
 
diff --git a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
index e1e65eb4f795..b61fdc9548d8 100644
--- a/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/ingenic,i2c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/ingenic,i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs I2C controller devicetree bindings
+title: Ingenic SoCs I2C controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
@@ -60,7 +60,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
     #include <dt-bindings/dma/jz4780-dma.h>
     #include <dt-bindings/interrupt-controller/irq.h>
     i2c@10054000 {
@@ -69,8 +69,7 @@ examples:
       #size-cells = <0>;
       reg = <0x10054000 0x1000>;
 
-      interrupt-parent = <&intc>;
-      interrupts = <56>;
+      interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
 
       clocks = <&cgu JZ4780_CLK_SMB4>;
       pinctrl-names = "default";
@@ -86,7 +85,6 @@ examples:
         compatible = "nxp,pcf8563";
         reg = <0x51>;
 
-        interrupt-parent = <&gpf>;
         interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
       };
     };
diff --git a/Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml b/Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml
new file mode 100644
index 000000000000..67882ec6e06a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/loongson,ls2x-i2c.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/loongson,ls2x-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson LS2X I2C Controller
+
+maintainers:
+  - Binbin Zhou <zhoubinbin@loongson.cn>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - loongson,ls2k-i2c
+      - loongson,ls7a-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0: i2c@1fe21000 {
+        compatible = "loongson,ls2k-i2c";
+        reg = <0x1fe21000 0x8>;
+        interrupt-parent = <&extioiic>;
+        interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@57 {
+            compatible = "atmel,24c16";
+            reg = <0x57>;
+            pagesize = <16>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
index f771c09aabfc..984fc1ed3ec6 100644
--- a/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/marvell,mv64xxx-i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell MV64XXX I2C Controller Device Tree Bindings
+title: Marvell MV64XXX I2C Controller
 
 maintainers:
   - Gregory CLEMENT <gregory.clement@bootlin.com>
@@ -19,12 +19,21 @@ properties:
       - const: allwinner,sun6i-a31-i2c
       - items:
           - enum:
+              - allwinner,suniv-f1c100s-i2c
               - allwinner,sun8i-a23-i2c
               - allwinner,sun8i-a83t-i2c
+              - allwinner,sun8i-v536-i2c
               - allwinner,sun50i-a64-i2c
-              - allwinner,sun50i-a100-i2c
               - allwinner,sun50i-h6-i2c
+          - const: allwinner,sun6i-a31-i2c
+      - description: Allwinner SoCs with offload support
+        items:
+          - enum:
+              - allwinner,sun20i-d1-i2c
+              - allwinner,sun50i-a100-i2c
               - allwinner,sun50i-h616-i2c
+              - allwinner,sun50i-r329-i2c
+          - const: allwinner,sun8i-v536-i2c
           - const: allwinner,sun6i-a31-i2c
       - const: marvell,mv64xxx-i2c
       - const: marvell,mv78230-i2c
@@ -58,6 +67,19 @@ properties:
   resets:
     maxItems: 1
 
+  dmas:
+    items:
+      - description: RX DMA Channel
+      - description: TX DMA Channel
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+dependencies:
+  dmas: [ dma-names ]
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml b/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml
new file mode 100644
index 000000000000..118ec00fc190
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/mediatek,mt7621-i2c.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/mediatek,mt7621-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Stefan Roese <sr@denx.de>
+
+title: Mediatek MT7621/MT7628 I2C master controller
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7621-i2c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: i2c
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: i2c
+
+required:
+  - compatible
+  - reg
+  - resets
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt7621-clk.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    i2c: i2c@900 {
+      compatible = "mediatek,mt7621-i2c";
+      reg = <0x900 0x100>;
+      clocks = <&sysc MT7621_CLK_I2C>;
+      clock-names = "i2c";
+      resets = <&sysc MT7621_RST_I2C>;
+      reset-names = "i2c";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pinctrl-names = "default";
+      pinctrl-0 = <&i2c_pins>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml b/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
deleted file mode 100644
index 93198d5d43a6..000000000000
--- a/Documentation/devicetree/bindings/i2c/mellanox,i2c-mlxbf.yaml
+++ /dev/null
@@ -1,77 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/i2c/mellanox,i2c-mlxbf.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mellanox I2C SMBus on BlueField SoCs
-
-maintainers:
-  - Khalil Blaiech <kblaiech@nvidia.com>
-
-allOf:
-  - $ref: /schemas/i2c/i2c-controller.yaml#
-
-properties:
-  compatible:
-    enum:
-      - mellanox,i2c-mlxbf1
-      - mellanox,i2c-mlxbf2
-
-  reg:
-    minItems: 3
-    items:
-      - description: Smbus block registers
-      - description: Cause master registers
-      - description: Cause slave registers
-      - description: Cause coalesce registers
-
-  interrupts:
-    maxItems: 1
-
-  clock-frequency:
-    enum: [ 100000, 400000, 1000000 ]
-    description:
-      bus frequency used to configure timing registers;
-      The frequency is expressed in Hz. Default is 100000.
-
-required:
-  - compatible
-  - reg
-  - interrupts
-
-unevaluatedProperties: false
-
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - mellanox,i2c-mlxbf1
-
-then:
-  properties:
-    reg:
-      maxItems: 3
-
-examples:
-  - |
-    i2c@2804000 {
-        compatible = "mellanox,i2c-mlxbf1";
-        reg = <0x02804000 0x800>,
-              <0x02801200 0x020>,
-              <0x02801260 0x020>;
-        interrupts = <57>;
-        clock-frequency = <100000>;
-    };
-
-  - |
-    i2c@2808800 {
-        compatible = "mellanox,i2c-mlxbf2";
-        reg = <0x02808800 0x600>,
-              <0x02808e00 0x020>,
-              <0x02808e20 0x020>,
-              <0x02808e40 0x010>;
-        interrupts = <57>;
-        clock-frequency = <400000>;
-    };
diff --git a/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
new file mode 100644
index 000000000000..afa3db726229
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/microchip,corei2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS I2C Controller
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,mpfs-i2c # Microchip PolarFire SoC compatible SoCs
+          - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core
+      - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      Desired I2C bus clock frequency in Hz. As only Standard and Fast
+      modes are supported, possible values are 100000 and 400000.
+    enum: [100000, 400000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@2010a000 {
+      compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7";
+      reg = <0x2010a000 0x1000>;
+      clocks = <&clkcfg 15>;
+      interrupt-parent = <&plic>;
+      interrupts = <58>;
+      clock-frequency = <100000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
index 128444942aec..00eb6ff6f5b1 100644
--- a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
@@ -4,20 +4,21 @@
 $id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
+title: nuvoton NPCM7XX I2C Controller
 
 description: |
-  The NPCM750x includes sixteen I2C bus controllers. All Controllers support
-  both master and slave mode. Each controller can switch between master and slave
-  at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
-  RX.
+  I2C bus controllers of the NPCM series support both master and
+  slave mode. Each controller can switch between master and slave at run time
+  (i.e. IPMB mode). HW FIFO for TX and RX are supported.
 
 maintainers:
   - Tali Perry <tali.perry1@gmail.com>
 
 properties:
   compatible:
-    const: nuvoton,npcm750-i2c
+    enum:
+      - nuvoton,npcm750-i2c
+      - nuvoton,npcm845-i2c
 
   reg:
     maxItems: 1
@@ -36,6 +37,10 @@ properties:
     default: 100000
     enum: [100000, 400000, 1000000]
 
+  nuvoton,sys-mgr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle of system manager register node.
+
 required:
   - compatible
   - reg
@@ -44,6 +49,15 @@ required:
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nuvoton,npcm845-i2c
+
+    then:
+      required:
+        - nuvoton,sys-mgr
 
 unevaluatedProperties: false
 
@@ -57,6 +71,7 @@ examples:
         clock-frequency = <100000>;
         interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
         compatible = "nuvoton,npcm750-i2c";
+        nuvoton,sys-mgr = <&gcr>;
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
deleted file mode 100644
index ab240e10debc..000000000000
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-NVIDIA Tegra186 BPMP I2C controller
-
-In Tegra186, the BPMP (Boot and Power Management Processor) owns certain HW
-devices, such as the I2C controller for the power management I2C bus. Software
-running on other CPUs must perform IPC to the BPMP in order to execute
-transactions on that I2C bus. This binding describes an I2C bus that is
-accessed in such a fashion.
-
-The BPMP I2C node must be located directly inside the main BPMP node. See
-../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding.
-
-This node represents an I2C controller. See ../i2c/i2c.txt for details of the
-core I2C binding.
-
-Required properties:
-- compatible:
-    Array of strings.
-    One of:
-    - "nvidia,tegra186-bpmp-i2c".
-- #address-cells: Address cells for I2C device address.
-    Single-cell integer.
-    Must be <1>.
-- #size-cells:
-    Single-cell integer.
-    Must be <0>.
-- nvidia,bpmp-bus-id:
-    Single-cell integer.
-    Indicates the I2C bus number this DT node represent, as defined by the
-    BPMP firmware.
-
-Example:
-
-bpmp {
-	...
-
-	i2c {
-		compatible = "nvidia,tegra186-bpmp-i2c";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		nvidia,bpmp-bus-id = <5>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
new file mode 100644
index 000000000000..b8319dcf3d8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nvidia,tegra186-bpmp-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) BPMP I2C controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  In Tegra186 and later, the BPMP (Boot and Power Management Processor)
+  owns certain HW devices, such as the I2C controller for the power
+  management I2C bus. Software running on other CPUs must perform IPC to
+  the BPMP in order to execute transactions on that I2C bus. This
+  binding describes an I2C bus that is accessed in such a fashion.
+
+  The BPMP I2C node must be located directly inside the main BPMP node.
+  See ../firmware/nvidia,tegra186-bpmp.yaml for details of the BPMP
+  binding.
+
+  This node represents an I2C controller. See ../i2c/i2c.txt for details
+  of the core I2C binding.
+
+properties:
+  compatible:
+    const: nvidia,tegra186-bpmp-i2c
+
+  nvidia,bpmp-bus-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Indicates the I2C bus number this DT node represents,
+      as defined by the BPMP firmware.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - nvidia,bpmp-bus-id
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
deleted file mode 100644
index 3f2f990c2e62..000000000000
--- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
-
-Required properties:
-- compatible : For Tegra20, must be one of "nvidia,tegra20-i2c-dvc" or
-  "nvidia,tegra20-i2c".  For Tegra30, must be "nvidia,tegra30-i2c".
-  For Tegra114, must be "nvidia,tegra114-i2c".  Otherwise, must be
-  "nvidia,<chip>-i2c", plus at least one of the above, where <chip> is
-  tegra124, tegra132, or tegra210.
-  Details of compatible are as follows:
-  nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C
-	controller. This only support master mode of I2C communication. Register
-	interface/offset and interrupts handling are different than generic I2C
-	controller. Driver of DVC I2C controller is only compatible with
-	"nvidia,tegra20-i2c-dvc".
-  nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support
-	master and slave mode of I2C communication. The i2c-tegra driver only
-	support master mode of I2C communication. Driver of I2C controller is
-	only compatible with "nvidia,tegra20-i2c".
-  nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is
-	very much similar to Tegra20 I2C controller with additional feature:
-	Continue Transfer Support. This feature helps to implement M_NO_START
-	as per I2C core API transfer flags. Driver of I2C controller is
-	compatible with "nvidia,tegra30-i2c" to enable the continue transfer
-	support. This is also compatible with "nvidia,tegra20-i2c" without
-	continue transfer support.
-  nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is
-	very much similar to Tegra30 I2C controller with some hardware
-	modification:
-	 - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and
-	   fast-clk. Tegra114 has only one clock source called as div-clk and
-	   hence clock mechanism is changed in I2C controller.
-	 - Tegra30/Tegra20 I2C controller has enabled per packet transfer by
-	   default and there is no way to disable it. Tegra114 has this
-	   interrupt disable by default and SW need to enable explicitly.
-	Due to above changes, Tegra114 I2C driver makes incompatible with
-	previous hardware driver. Hence, tegra114 I2C controller is compatible
-	with "nvidia,tegra114-i2c".
-  nvidia,tegra210-i2c-vi: Tegra210 has one I2C controller that is on host1x bus
-	and is part of VE power domain and typically used for camera use-cases.
-	This VI I2C controller is mostly compatible with the programming model
-	of the regular I2C controllers with a few exceptions. The I2C registers
-	start at an offset of 0xc00 (instead of 0), registers are 16 bytes
-	apart (rather than 4) and the controller does not support slave mode.
-- reg: Should contain I2C controller registers physical address and length.
-- interrupts: Should contain I2C controller interrupts.
-- address-cells: Address cells for I2C device address.
-- size-cells: Size of the I2C device address.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  Tegra20/Tegra30:
-  - div-clk
-  - fast-clk
-  Tegra114:
-  - div-clk
-  Tegra210:
-  - div-clk
-  - slow (only for nvidia,tegra210-i2c-vi compatible node)
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - i2c
-- power-domains: Only for nvidia,tegra210-i2c-vi compatible node and must
-  include venc powergate node as vi i2c is part of VE power domain.
-  tegra210-i2c-vi:
-  - pd_venc
-- dmas: Must contain an entry for each entry in clock-names.
-  See ../dma/dma.txt for details.
-- dma-names: Must include the following entries:
-  - rx
-  - tx
-
-Example:
-
-	i2c@7000c000 {
-		compatible = "nvidia,tegra20-i2c";
-		reg = <0x7000c000 0x100>;
-		interrupts = <0 38 0x04>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&tegra_car 12>, <&tegra_car 124>;
-		clock-names = "div-clk", "fast-clk";
-		resets = <&tegra_car 12>;
-		reset-names = "i2c";
-		dmas = <&apbdma 16>, <&apbdma 16>;
-		dma-names = "rx", "tx";
-	};
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
new file mode 100644
index 000000000000..424a4fc218b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nvidia,tegra20-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+title: NVIDIA Tegra I2C controller driver
+
+properties:
+  compatible:
+    oneOf:
+      - description: Tegra20 has 4 generic I2C controller. This can support
+          master and slave mode of I2C communication. The i2c-tegra driver
+          only support master mode of I2C communication. Driver of I2C
+          controller is only compatible with "nvidia,tegra20-i2c".
+        const: nvidia,tegra20-i2c
+      - description: Tegra20 has specific I2C controller called as DVC I2C
+          controller. This only support master mode of I2C communication.
+          Register interface/offset and interrupts handling are different than
+          generic I2C controller. Driver of DVC I2C controller is only
+          compatible with "nvidia,tegra20-i2c-dvc".
+        const: nvidia,tegra20-i2c-dvc
+      - description: |
+          Tegra30 has 5 generic I2C controller. This controller is very much
+          similar to Tegra20 I2C controller with additional feature: Continue
+          Transfer Support. This feature helps to implement M_NO_START as per
+          I2C core API transfer flags. Driver of I2C controller is compatible
+          with "nvidia,tegra30-i2c" to enable the continue transfer support.
+          This is also compatible with "nvidia,tegra20-i2c" without continue
+          transfer support.
+        items:
+          - const: nvidia,tegra30-i2c
+          - const: nvidia,tegra20-i2c
+      - description: |
+          Tegra114 has 5 generic I2C controllers. This controller is very much
+          similar to Tegra30 I2C controller with some hardware modification:
+            - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk
+              and fast-clk. Tegra114 has only one clock source called as
+              div-clk and hence clock mechanism is changed in I2C controller.
+            - Tegra30/Tegra20 I2C controller has enabled per packet transfer
+              by default and there is no way to disable it. Tegra114 has this
+              interrupt disable by default and SW need to enable explicitly.
+          Due to above changes, Tegra114 I2C driver makes incompatible with
+          previous hardware driver. Hence, Tegra114 I2C controller is
+          compatible with "nvidia,tegra114-i2c".
+        const: nvidia,tegra114-i2c
+      - description: |
+          Tegra124 has 6 generic I2C controllers. These controllers are very
+          similar to those found on Tegra114 but also contain several hardware
+          improvements and new registers.
+        const: nvidia,tegra124-i2c
+      - description: |
+          Tegra210 has 6 generic I2C controllers. These controllers are very
+          similar to those found on Tegra124.
+        items:
+          - const: nvidia,tegra210-i2c
+          - const: nvidia,tegra124-i2c
+      - description: |
+          Tegra210 has one I2C controller that is on host1x bus and is part of
+          the VE power domain and typically used for camera use-cases. This VI
+          I2C controller is mostly compatible with the programming model of
+          the regular I2C controllers with a few exceptions. The I2C registers
+          start at an offset of 0xc00 (instead of 0), registers are 16 bytes
+          apart (rather than 4) and the controller does not support slave
+          mode.
+        const: nvidia,tegra210-i2c-vi
+      - description: |
+          Tegra186 has 9 generic I2C controllers, two of which are in the AON
+          (always-on) partition of the SoC. All of these controllers are very
+          similar to those found on Tegra210.
+        const: nvidia,tegra186-i2c
+      - description: |
+          Tegra194 has 8 generic I2C controllers, two of which are in the AON
+          (always-on) partition of the SoC. All of these controllers are very
+          similar to those found on Tegra186. However, these controllers have
+          support for 64 KiB transactions whereas earlier chips supported no
+          more than 4 KiB per transactions.
+        const: nvidia,tegra194-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: i2c
+
+  dmas:
+    items:
+      - description: DMA channel for the reception FIFO
+      - description: DMA channel for the transmission FIFO
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-i2c
+              - nvidia,tegra30-i2c
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+            - const: fast-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra114-i2c
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-i2c
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-i2c-vi
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: div-clk
+            - const: slow
+        power-domains:
+          items:
+            - description: phandle to the VENC power domain
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@7000c000 {
+        compatible = "nvidia,tegra20-i2c";
+        reg = <0x7000c000 0x100>;
+        interrupts = <0 38 0x04>;
+        clocks = <&tegra_car 12>, <&tegra_car 124>;
+        clock-names = "div-clk", "fast-clk";
+        resets = <&tegra_car 12>;
+        reset-names = "i2c";
+        dmas = <&apbdma 16>, <&apbdma 16>;
+        dma-names = "rx", "tx";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
new file mode 100644
index 000000000000..85d9efb743ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/opencores,i2c-ocores.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OpenCores I2C controller
+
+maintainers:
+  - Peter Korsgaard <peter@korsgaard.com>
+  - Andrew Lunn <andrew@lunn.ch>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - sifive,fu740-c000-i2c # Opencore based IP block FU740-C000 SoC
+              - sifive,fu540-c000-i2c # Opencore based IP block FU540-C000 SoC
+          - const: sifive,i2c0
+      - enum:
+          - opencores,i2c-ocores
+          - aeroflexgaisler,i2cmst
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      clock-frequency property is meant to control the bus frequency for i2c bus
+      drivers, but it was incorrectly used to specify i2c controller input clock
+      frequency. So the following rules are set to fix this situation:
+      - if clock-frequency is present and neither opencores,ip-clock-frequency nor
+        clocks are, then clock-frequency specifies i2c controller clock frequency.
+        This is to keep backwards compatibility with setups using old DTB. i2c bus
+        frequency is fixed at 100 KHz.
+      - if clocks is present it specifies i2c controller clock. clock-frequency
+        property specifies i2c bus frequency.
+      - if opencores,ip-clock-frequency is present it specifies i2c controller
+        clock frequency. clock-frequency property specifies i2c bus frequency.
+    default: 100000
+
+  reg-io-width:
+    description: |
+      io register width in bytes
+    enum: [1, 2, 4]
+
+  reg-shift:
+    description: |
+      device register offsets are shifted by this value
+    default: 0
+
+  regstep:
+    description: |
+      deprecated, use reg-shift above
+    deprecated: true
+
+  opencores,ip-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Frequency of the controller clock in Hz. Mutually exclusive with clocks.
+      See the note above.
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+oneOf:
+  - required:
+      - opencores,ip-clock-frequency
+  - required:
+      - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@a0000000 {
+      compatible = "opencores,i2c-ocores";
+      reg = <0xa0000000 0x8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <10>;
+      opencores,ip-clock-frequency = <20000000>;
+
+      reg-shift = <0>;	/* 8 bit registers */
+      reg-io-width = <1>;	/* 8 bit read/write */
+    };
+
+    i2c@b0000000 {
+      compatible = "opencores,i2c-ocores";
+      reg = <0xa0000000 0x8>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <10>;
+      clocks = <&osc>;
+      clock-frequency = <400000>; /* i2c bus frequency 400 KHz */
+
+      reg-shift = <0>;	/* 8 bit registers */
+      reg-io-width = <1>;	/* 8 bit read/write */
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
new file mode 100644
index 000000000000..ec79b7270437
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml
@@ -0,0 +1,277 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-cci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Control Interface (CCI) I2C controller
+
+maintainers:
+  - Loic Poulain <loic.poulain@linaro.org>
+  - Robert Foss <robert.foss@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,msm8226-cci
+          - qcom,msm8974-cci
+          - qcom,msm8996-cci
+
+      - items:
+          - enum:
+              - qcom,msm8916-cci
+          - const: qcom,msm8226-cci # CCI v1
+
+      - items:
+          - enum:
+              - qcom,sdm845-cci
+              - qcom,sm6350-cci
+              - qcom,sm8250-cci
+              - qcom,sm8450-cci
+          - const: qcom,msm8996-cci # CCI v2
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    minItems: 3
+    maxItems: 6
+
+  clock-names:
+    minItems: 3
+    maxItems: 6
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^i2c-bus@[01]$":
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 1
+
+      clock-frequency:
+        default: 100000
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-cci
+    then:
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8226-cci
+              - qcom,msm8916-cci
+    then:
+      properties:
+        i2c-bus@1: false
+
+  - if:
+      properties:
+        compatible:
+          oneOf:
+            - contains:
+                enum:
+                  - qcom,msm8974-cci
+
+            - const: qcom,msm8226-cci
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: camss_top_ahb
+            - const: cci_ahb
+            - const: cci
+
+  - if:
+      properties:
+        compatible:
+          oneOf:
+            - contains:
+                enum:
+                  - qcom,msm8916-cci
+
+            - const: qcom,msm8996-cci
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: camss_top_ahb
+            - const: cci_ahb
+            - const: cci
+            - const: camss_ahb
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-cci
+              - qcom,sm6350-cci
+    then:
+      properties:
+        clocks:
+          minItems: 6
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: soc_ahb
+            - const: slow_ahb_src
+            - const: cpas_ahb
+            - const: cci
+            - const: cci_src
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8250-cci
+              - qcom,sm8450-cci
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: camnoc_axi
+            - const: slow_ahb_src
+            - const: cpas_ahb
+            - const: cci
+            - const: cci_src
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cci@ac4a000 {
+        reg = <0x0ac4a000 0x4000>;
+        compatible = "qcom,sdm845-cci", "qcom,msm8996-cci";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+        power-domains = <&clock_camcc TITAN_TOP_GDSC>;
+
+        clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+                 <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+                 <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+                 <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+                 <&clock_camcc CAM_CC_CCI_CLK>,
+                 <&clock_camcc CAM_CC_CCI_CLK_SRC>;
+        clock-names = "camnoc_axi",
+                      "soc_ahb",
+                      "slow_ahb_src",
+                      "cpas_ahb",
+                      "cci",
+                      "cci_src";
+
+        assigned-clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+                          <&clock_camcc CAM_CC_CCI_CLK>;
+        assigned-clock-rates = <80000000>,
+                               <37500000>;
+
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&cci0_default &cci1_default>;
+        pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+
+        i2c-bus@0 {
+            reg = <0>;
+            clock-frequency = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            camera@10 {
+                compatible = "ovti,ov8856";
+                reg = <0x10>;
+
+                reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&cam0_default>;
+
+                clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+                clock-names = "xvclk";
+                clock-frequency = <19200000>;
+
+                dovdd-supply = <&vreg_lvs1a_1p8>;
+                avdd-supply = <&cam0_avdd_2v8>;
+                dvdd-supply = <&cam0_dvdd_1v2>;
+
+                port {
+                    ov8856_ep: endpoint {
+                        link-frequencies = /bits/ 64 <360000000 180000000>;
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csiphy0_ep>;
+                    };
+                };
+            };
+        };
+
+        cci_i2c1: i2c-bus@1 {
+            reg = <1>;
+            clock-frequency = <1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            camera@60 {
+                compatible = "ovti,ov7251";
+                reg = <0x60>;
+
+                enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&cam3_default>;
+
+                clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
+                clock-names = "xclk";
+                clock-frequency = <24000000>;
+
+                vdddo-supply = <&vreg_lvs1a_1p8>;
+                vdda-supply = <&cam3_avdd_2v8>;
+
+                port {
+                    ov7251_ep: endpoint {
+                        data-lanes = <0 1>;
+                        remote-endpoint = <&csiphy3_ep>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
new file mode 100644
index 000000000000..9f66a3bb1f80
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-geni-qcom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Geni based QUP I2C Controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,geni-i2c
+      - qcom,geni-i2c-master-hub
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interconnects:
+    minItems: 2
+    maxItems: 3
+
+  interconnect-names:
+    minItems: 2
+    maxItems: 3
+
+  interrupts:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  required-opps:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - clocks
+  - clock-names
+  - reg
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,geni-i2c-master-hub
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: se
+            - const: core
+
+        dmas: false
+        dma-names: false
+
+        interconnects:
+          maxItems: 2
+
+        interconnect-names:
+          items:
+            - const: qup-core
+            - const: qup-config
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          const: se
+
+        interconnects:
+          minItems: 3
+
+        interconnect-names:
+          items:
+            - const: qup-core
+            - const: qup-config
+            - const: qup-memory
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+    #include <dt-bindings/interconnect/qcom,sc7180.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    i2c@88000 {
+        compatible = "qcom,geni-i2c";
+        reg = <0x00880000 0x4000>;
+        clock-names = "se";
+        clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&qup_i2c0_default>;
+        interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+                        <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "qup-core", "qup-config", "qup-memory";
+        power-domains = <&rpmhpd SC7180_CX>;
+        required-opps = <&rpmhpd_opp_low_svs>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
deleted file mode 100644
index dc71754a56af..000000000000
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Qualcomm Universal Peripheral (QUP) I2C controller
-
-Required properties:
- - compatible: Should be:
-   * "qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
-   * "qcom,i2c-qup-v2.1.1" for 8974 v1.
-   * "qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
- - reg: Should contain QUP register address and length.
- - interrupts: Should contain I2C interrupt.
-
- - clocks: A list of phandles + clock-specifiers, one for each entry in
-   clock-names.
- - clock-names: Should contain:
-   * "core" for the core clock
-   * "iface" for the AHB clock
-
- - #address-cells: Should be <1> Address cells for i2c device address
- - #size-cells: Should be <0> as i2c addresses have no size component
-
-Optional properties:
- - clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
-                    defaults to 100kHz if omitted.
-
-Child nodes should conform to i2c bus binding.
-
-Example:
-
- i2c@f9924000 {
- 	compatible = "qcom,i2c-qup-v2.2.1";
- 	reg = <0xf9924000 0x1000>;
- 	interrupts = <0 96 0>;
-
- 	clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
- 	clock-names = "core", "iface";
-
- 	clock-frequency = <355000>;
-
- 	#address-cells = <1>;
- 	#size-cells = <0>;
- };
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml
new file mode 100644
index 000000000000..f43947514d48
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/qcom,i2c-qup.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Universal Peripheral (QUP) I2C controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,i2c-qup-v1.1.1     # for 8660, 8960 and 8064
+      - qcom,i2c-qup-v2.1.1     # for 8974 v1
+      - qcom,i2c-qup-v2.2.1     # for 8974 v2 and later
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+
+  clock-frequency:
+    default: 100000
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+  interrupts:
+    maxItems: 1
+
+  pinctrl-0: true
+  pinctrl-1: true
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clock-names
+  - clocks
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@c175000 {
+        compatible = "qcom,i2c-qup-v2.2.1";
+        reg = <0x0c175000 0x600>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+                 <&gcc GCC_BLSP1_AHB_CLK>;
+        clock-names = "core", "iface";
+        dmas = <&blsp1_dma 6>, <&blsp1_dma 7>;
+        dma-names = "tx", "rx";
+        pinctrl-names = "default", "sleep";
+        pinctrl-0 = <&blsp1_i2c1_default>;
+        pinctrl-1 = <&blsp1_i2c1_sleep>;
+        clock-frequency = <400000>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
index 052aad44e781..c4ace5585e1e 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml
@@ -46,9 +46,15 @@ properties:
               - renesas,i2c-r8a77980     # R-Car V3H
               - renesas,i2c-r8a77990     # R-Car E3
               - renesas,i2c-r8a77995     # R-Car D3
-              - renesas,i2c-r8a779a0     # R-Car V3U
           - const: renesas,rcar-gen3-i2c # R-Car Gen3 and RZ/G2
 
+      - items:
+          - enum:
+              - renesas,i2c-r8a779a0     # R-Car V3U
+              - renesas,i2c-r8a779f0     # R-Car S4-8
+              - renesas,i2c-r8a779g0     # R-Car V4H
+          - const: renesas,rcar-gen4-i2c # R-Car Gen4
+
   reg:
     maxItems: 1
 
@@ -132,6 +138,7 @@ allOf:
             enum:
               - renesas,rcar-gen2-i2c
               - renesas,rcar-gen3-i2c
+              - renesas,rcar-gen4-i2c
     then:
       required:
         - resets
diff --git a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
index 402fd125e010..2291a7cd619b 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
+++ b/Documentation/devicetree/bindings/i2c/renesas,riic.yaml
@@ -19,7 +19,9 @@ properties:
       - enum:
           - renesas,riic-r7s72100   # RZ/A1H
           - renesas,riic-r7s9210    # RZ/A2M
+          - renesas,riic-r9a07g043  # RZ/G2UL and RZ/Five
           - renesas,riic-r9a07g044  # RZ/G2{L,LC}
+          - renesas,riic-r9a07g054  # RZ/V2L
       - const: renesas,riic-rz      # RZ/A or RZ/G2L
 
   reg:
@@ -58,6 +60,9 @@ properties:
   power-domains:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -74,7 +79,9 @@ if:
     compatible:
       contains:
         enum:
+          - renesas,riic-r9a07g043
           - renesas,riic-r9a07g044
+          - renesas,riic-r9a07g054
 then:
   required:
     - resets
diff --git a/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
new file mode 100644
index 000000000000..5d1e7885b64a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/renesas,rzv2m.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M I2C Bus Interface
+
+maintainers:
+  - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a09g011-i2c  # RZ/V2M
+      - const: renesas,rzv2m-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Data transmission/reception interrupt
+      - description: Status interrupt
+
+  interrupt-names:
+    items:
+      - const: tia
+      - const: tis
+
+  clock-frequency:
+    default: 100000
+    enum: [ 100000, 400000 ]
+    description:
+      Desired I2C bus clock frequency in Hz.
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - power-domains
+  - resets
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a09g011-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c0: i2c@a4030000 {
+        compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
+        reg = <0xa4030000 0x80>;
+        interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "tia", "tis";
+        clocks = <&cpg CPG_MOD R9A09G011_IIC_PCLK0>;
+        resets = <&cpg R9A09G011_IIC_GPA_PRESETN>;
+        power-domains = <&cpg>;
+        clock-frequency = <100000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
new file mode 100644
index 000000000000..b204e35e4f8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/samsung,s3c2410-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC I2C Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c2410-i2c
+      - samsung,s3c2440-i2c
+        # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs:
+      - samsung,s3c2440-hdmiphy-i2c
+        # For s3c2440-like I2C used as a host to SATA PHY controller on an
+        # internal bus:
+      - samsung,exynos5-sata-phy-i2c
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: i2c
+
+  gpios:
+    description: |
+      The order of the GPIOs should be the following:: <SDA, SCL>.  The GPIO
+      specifier depends on the gpio controller. Required in all cases except
+      for "samsung,s3c2440-hdmiphy-i2c" whose input/output lines are
+      permanently wired to the respective client.
+      This property is deprecated. Use "pinctrl-0" and "pinctrl-names" instead.
+    deprecated: true
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,i2c-max-bus-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Desired frequency in Hz of the bus.
+    default: 100000
+
+  samsung,i2c-sda-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Delay (in ns) applied to data line (SDA) edges.
+    default: 0
+
+  samsung,i2c-slave-addr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Slave address in multi-master environment.
+    default: 0
+
+  samsung,sysreg-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Pandle to syscon used to control the system registers.
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2440-hdmiphy-i2c
+              - samsung,exynos5-sata-phy-i2c
+    then:
+      properties:
+        gpios: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s3c2410-i2c
+              - samsung,s3c2440-i2c
+              - samsung,s3c2440-hdmiphy-i2c
+    then:
+      required:
+        - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@12c60000 {
+        compatible = "samsung,s3c2440-i2c";
+        reg = <0x12C60000 0x100>;
+        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clock CLK_I2C0>;
+        clock-names = "i2c";
+        pinctrl-names = "default";
+        pinctrl-0 = <&i2c0_bus>;
+
+        samsung,sysreg-phandle = <&sysreg_system_controller>;
+        samsung,i2c-sda-delay = <100>;
+        samsung,i2c-max-bus-freq = <20000>;
+        samsung,i2c-slave-addr = <0x66>;
+
+        eeprom@50 {
+            compatible = "samsung,s524ad0xd1", "atmel,24c128";
+            reg = <0x50>;
+        };
+    };
+
+    i2c@12ce0000 {
+        compatible = "samsung,s3c2440-hdmiphy-i2c";
+        reg = <0x12CE0000 0x1000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clock CLK_I2C_HDMI>;
+        clock-names = "i2c";
+
+        samsung,i2c-sda-delay = <100>;
+        samsung,i2c-max-bus-freq = <66000>;
+
+        phy-i2c@38 {
+            compatible = "samsung,exynos4212-hdmiphy";
+            reg = <0x38>;
+        };
+    };
+
+    i2c@121d0000 {
+        compatible = "samsung,exynos5-sata-phy-i2c";
+        reg = <0x121D0000 0x100>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clocks = <&clock CLK_SATA_PHYI2C>;
+        clock-names = "i2c";
+
+        samsung,i2c-sda-delay = <100>;
+        samsung,i2c-max-bus-freq = <40000>;
+
+        phy-i2c@38 {
+            compatible = "samsung,exynos-sataphy-i2c";
+            reg = <0x38>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml
new file mode 100644
index 000000000000..f9d6e2038bb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/socionext,synquacer-i2c.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/socionext,synquacer-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext SynQuacer I2C Controller
+
+maintainers:
+  - Ard Biesheuvel <ardb@kernel.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,synquacer-i2c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk
+
+  clock-frequency:
+    minimum: 100000
+    maximum: 400000
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@51210000 {
+        compatible = "socionext,synquacer-i2c";
+        reg = <0x51210000 0x1000>;
+        interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        clock-names = "pclk";
+        clocks = <&clk_i2c>;
+        clock-frequency = <400000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
index c76131902b77..4bbe9e775da1 100644
--- a/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-fi2c.yaml
@@ -29,6 +29,9 @@ properties:
     minimum: 100000
     maximum: 400000
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
index ddde08636ab0..5abf496edb59 100644
--- a/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/socionext,uniphier-i2c.yaml
@@ -29,6 +29,9 @@ properties:
     minimum: 100000
     maximum: 400000
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
new file mode 100644
index 000000000000..16024415a4a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/st,nomadik-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST Microelectronics Nomadik I2C
+
+description: The Nomadik I2C host controller began its life in the ST
+  Microelectronics STn8800 SoC, and was then inherited into STn8810 and
+  STn8815. It was part of the prototype STn8500 which then became ST-Ericsson
+  DB8500 after the merge of these two companies wireless divisions.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,nomadik-i2c
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      # The variant found in STn8815
+      - items:
+          - const: st,nomadik-i2c
+          - const: arm,primecell
+      # The variant found in DB8500
+      - items:
+          - const: stericsson,db8500-i2c
+          - const: st,nomadik-i2c
+          - const: arm,primecell
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    oneOf:
+      # Clock name in STn8815
+      - items:
+          - const: mclk
+          - const: apb_pclk
+      # Clock name in DB8500
+      - items:
+          - const: i2cclk
+          - const: apb_pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clock-frequency:
+    minimum: 1
+    maximum: 400000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/stericsson,db8500-prcc-reset.h>
+    #include <dt-bindings/arm/ux500_pm_domains.h>
+    i2c@80004000 {
+      compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
+      reg = <0x80004000 0x1000>;
+      interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      clock-frequency = <400000>;
+      clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
+      clock-names = "i2cclk", "apb_pclk";
+      power-domains = <&pm_domains DOMAIN_VAPE>;
+      resets = <&prcc_reset DB8500_PRCC_3 DB8500_PRCC_3_RESET_I2C0>;
+    };
+
+    i2c@101f8000 {
+      compatible = "st,nomadik-i2c", "arm,primecell";
+      reg = <0x101f8000 0x1000>;
+      interrupt-parent = <&vica>;
+      interrupts = <20>;
+      clock-frequency = <100000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clocks = <&i2c0clk>, <&pclki2c0>;
+      clock-names = "mclk", "apb_pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml
new file mode 100644
index 000000000000..08f9c1e446fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/st,sti-i2c.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/st,sti-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: I2C controller embedded in STMicroelectronics STi platform
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,comms-ssc-i2c
+      - st,comms-ssc4-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    maxItems: 1
+
+  clock-frequency:
+    enum: [ 100000, 400000 ]
+    default: 100000
+
+  st,i2c-min-scl-pulse-width-us:
+    description:
+      The minimum valid SCL pulse width that is allowed through the
+      deglitch circuit. In units of us.
+
+  st,i2c-min-sda-pulse-width-us:
+    description:
+      The minimum valid SDA pulse width that is allowed through the
+      deglitch circuit. In units of us.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stih407-clks.h>
+    i2c@fed40000 {
+        compatible = "st,comms-ssc4-i2c";
+        reg = <0xfed40000 0x110>;
+        interrupts =  <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_s_a0_ls CLK_ICN_REG>;
+        clock-names = "ssc";
+        clock-frequency = <400000>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2c0_default>;
+        st,i2c-min-scl-pulse-width-us = <0>;
+        st,i2c-min-sda-pulse-width-us = <5>;
+    };
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
index d747f4990ad8..94b75d9f66cd 100644
--- a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: I2C controller embedded in STMicroelectronics STM32 I2C platform
 
 maintainers:
-  - Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
+  - Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
@@ -17,6 +17,7 @@ allOf:
           contains:
             enum:
               - st,stm32f7-i2c
+              - st,stm32mp13-i2c
               - st,stm32mp15-i2c
     then:
       properties:
@@ -25,16 +26,9 @@ allOf:
 
         i2c-scl-falling-time-ns:
           default: 10
-
-        st,syscfg-fmp:
-          description: Use to set Fast Mode Plus bit within SYSCFG when
-                       Fast Mode Plus speed is selected by slave.
-                       Format is phandle to syscfg / register offset within
-                       syscfg / register bitmask for FMP bit.
-          $ref: "/schemas/types.yaml#/definitions/phandle-array"
-          items:
-            minItems: 3
-            maxItems: 3
+    else:
+      properties:
+        st,syscfg-fmp: false
 
   - if:
       properties:
@@ -52,6 +46,7 @@ properties:
     enum:
       - st,stm32f4-i2c
       - st,stm32f7-i2c
+      - st,stm32mp13-i2c
       - st,stm32mp15-i2c
 
   reg:
@@ -62,6 +57,11 @@ properties:
       - description: interrupt ID for I2C event
       - description: interrupt ID for I2C error
 
+  interrupt-names:
+    items:
+      - const: event
+      - const: error
+
   resets:
     maxItems: 1
 
@@ -87,6 +87,18 @@ properties:
     minimum: 1
     maximum: 1000000
 
+  st,syscfg-fmp:
+    description: Use to set Fast Mode Plus bit within SYSCFG when Fast Mode
+      Plus speed is selected by slave.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscfg
+          - description: register offset within syscfg
+          - description: register bitmask for FMP bit
+
+  wakeup-source: true
+
 required:
   - compatible
   - reg
@@ -112,6 +124,9 @@ examples:
           clocks = <&rcc 0 149>;
       };
 
+  - |
+    #include <dt-bindings/mfd/stm32f7-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
     //Example 2 (with st,stm32f7-i2c compatible)
       i2c@40005800 {
           compatible = "st,stm32f7-i2c";
@@ -124,6 +139,9 @@ examples:
           clocks = <&rcc 1 CLK_I2C1>;
       };
 
+  - |
+    #include <dt-bindings/mfd/stm32f7-rcc.h>
+    #include <dt-bindings/clock/stm32fx-clock.h>
     //Example 3 (with st,stm32mp15-i2c compatible on stm32mp)
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
@@ -141,4 +159,3 @@ examples:
           i2c-scl-falling-time-ns = <20>;
           st,syscfg-fmp = <&syscfg 0x4 0x2>;
       };
-...
diff --git a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
index db0843be91c5..781108ae1ce3 100644
--- a/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/ti,omap4-i2c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i2c/ti,omap4-i2c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for I2C controllers on TI's OMAP and K3 SoCs
+title: I2C controllers on TI's OMAP and K3 SoCs
 
 maintainers:
   - Vignesh Raghavendra <vigneshr@ti.com>
diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
index 715dcfa5a922..658ae92fa86d 100644
--- a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
+++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/i2c/xlnx,xps-iic-2.00.a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Xilinx IIC controller Device Tree Bindings
+title: Xilinx IIC controller
 
 maintainers:
   - info@mocean-labs.com
@@ -14,7 +14,9 @@ allOf:
 
 properties:
   compatible:
-    const: xlnx,xps-iic-2.00.a
+    enum:
+      - xlnx,axi-iic-2.1
+      - xlnx,xps-iic-2.00.a
 
   reg:
     maxItems: 1
@@ -30,6 +32,13 @@ properties:
     description: |
       Input clock name.
 
+  clock-frequency:
+    description:
+      Optional I2C SCL clock frequency. If not specified, do not configure
+      in software, rely only on hardware design value.
+    default: 100000
+    enum: [ 100000, 400000, 1000000 ]
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml b/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml
new file mode 100644
index 000000000000..fcc3dbff9c9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/aspeed,ast2600-i3c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2600 i3c controller
+
+maintainers:
+  - Jeremy Kerr <jk@codeconstruct.com.au>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    const: aspeed,ast2600-i3c
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  sda-pullup-ohms:
+    enum: [545, 750, 2000]
+    default: 2000
+    description: |
+      Value to configure SDA pullup resistor, in Ohms.
+
+  aspeed,global-regs:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to i3c global register syscon node
+          - description: index of this i3c controller in the global register set
+    description: |
+      A (phandle, controller index) reference to the i3c global register set
+      used for this device.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - aspeed,global-regs
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i3c-master@2000 {
+        compatible = "aspeed,ast2600-i3c";
+        reg = <0x2000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+        clocks = <&syscon 0>;
+        resets = <&syscon 0>;
+        aspeed,global-regs = <&i3c_global 0>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i3c1_default>;
+        interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
deleted file mode 100644
index 3716589d6999..000000000000
--- a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Bindings for cadence I3C master block
-=====================================
-
-Required properties:
---------------------
-- compatible: shall be "cdns,i3c-master"
-- clocks: shall reference the pclk and sysclk
-- clock-names: shall contain "pclk" and "sysclk"
-- interrupts: the interrupt line connected to this I3C master
-- reg: I3C master registers
-
-Mandatory properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
-
-- #address-cells: shall be set to 1
-- #size-cells: shall be set to 0
-
-Optional properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
-
-- i2c-scl-hz
-- i3c-scl-hz
-
-I3C device connected on the bus follow the generic description (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details).
-
-Example:
-
-	i3c-master@0d040000 {
-		compatible = "cdns,i3c-master";
-		clocks = <&coreclock>, <&i3csysclock>;
-		clock-names = "pclk", "sysclk";
-		interrupts = <3 0>;
-		reg = <0x0d040000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		i2c-scl-hz = <100000>;
-
-		nunchuk: nunchuk@52 {
-			compatible = "nintendo,nunchuk";
-			reg = <0x52 0x0 0x10>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
new file mode 100644
index 000000000000..cc40d25358ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/cdns,i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence I3C master block
+
+maintainers:
+  - Boris Brezillon <bbrezillon@kernel.org>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    const: cdns,i3c-master
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: sysclk
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c-master@d040000 {
+        compatible = "cdns,i3c-master";
+        clocks = <&coreclock>, <&i3csysclock>;
+        clock-names = "pclk", "sysclk";
+        interrupts = <3 0>;
+        reg = <0x0d040000 0x1000>;
+        #address-cells = <3>;
+        #size-cells = <0>;
+        i2c-scl-hz = <100000>;
+
+        eeprom@57{
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 0x10>;
+            pagesize = <0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml
index 1f82fc923799..fdb4212149e7 100644
--- a/Documentation/devicetree/bindings/i3c/i3c.yaml
+++ b/Documentation/devicetree/bindings/i3c/i3c.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/i3c/i3c.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: I3C bus binding
+title: I3C bus
 
 maintainers:
   - Alexandre Belloni <alexandre.belloni@bootlin.com>
diff --git a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
index 04da001fc6ec..c002afdbfc7c 100644
--- a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
+++ b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/i3c/mipi-i3c-hci.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: MIPI I3C HCI Device Tree Bindings
+title: MIPI I3C HCI
 
 maintainers:
   - Nicolas Pitre <npitre@baylibre.com>
diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
deleted file mode 100644
index 07f35f36085d..000000000000
--- a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Bindings for Synopsys DesignWare I3C master block
-=================================================
-
-Required properties:
---------------------
-- compatible: shall be "snps,dw-i3c-master-1.00a"
-- clocks: shall reference the core_clk
-- interrupts: the interrupt line connected to this I3C master
-- reg: Offset and length of I3C master registers
-
-Mandatory properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
-
-- #address-cells: shall be set to 3
-- #size-cells: shall be set to 0
-
-Optional properties defined by the generic binding (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details):
-
-- i2c-scl-hz
-- i3c-scl-hz
-
-I3C device connected on the bus follow the generic description (see
-Documentation/devicetree/bindings/i3c/i3c.yaml for more details).
-
-Example:
-
-	i3c-master@2000 {
-		compatible = "snps,dw-i3c-master-1.00a";
-		#address-cells = <3>;
-		#size-cells = <0>;
-		reg = <0x02000 0x1000>;
-		interrupts = <0>;
-		clocks = <&i3cclk>;
-
-		eeprom@57{
-			compatible = "atmel,24c01";
-			reg = <0x57 0x0 0x10>;
-			pagesize = <0x8>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
new file mode 100644
index 000000000000..7a76fd32962a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i3c/snps,dw-i3c-master.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare I3C master block
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: i3c.yaml#
+
+properties:
+  compatible:
+    const: snps,dw-i3c-master-1.00a
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i3c-master@2000 {
+        compatible = "snps,dw-i3c-master-1.00a";
+        #address-cells = <3>;
+        #size-cells = <0>;
+        reg = <0x02000 0x1000>;
+        interrupts = <0>;
+        clocks = <&i3cclk>;
+
+        eeprom@57{
+            compatible = "atmel,24c01";
+            reg = <0x57 0x0 0x10>;
+            pagesize = <0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
index 6f8f8a6258fe..b6ba7ad1a8d5 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
@@ -27,20 +27,21 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
index 4fcbfd93e218..5887021cc90f 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ADIS16240 Programmable Impact Sensor and Recorder driver
 
 maintainers:
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+  - Alexandru Tachici <alexandru.tachici@analog.com>
 
 description: |
   ADIS16240 Programmable Impact Sensor and Recorder driver that supports
@@ -25,20 +25,21 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
new file mode 100644
index 000000000000..0c5b64cae965
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl313.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometers
+
+maintainers:
+  - Lucas Stankus <lucas.p.stankus@gmail.com>
+
+description: |
+  Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometer that
+  support both I2C & SPI interfaces.
+    https://www.analog.com/en/products/adxl312.html
+    https://www.analog.com/en/products/adxl313.html
+    https://www.analog.com/en/products/adxl314.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl312
+      - adi,adxl313
+      - adi,adxl314
+
+  reg:
+    maxItems: 1
+
+  spi-3wire: true
+
+  vs-supply:
+    description: Regulator that supplies power to the accelerometer
+
+  vdd-supply:
+    description: Regulator that supplies the digital interface supply voltage
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - INT1
+        - INT2
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@53 {
+            compatible = "adi,adxl313";
+            reg = <0x53>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "adi,adxl313";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "INT1";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index 11d32a288535..07cacc3f6a97 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -32,8 +32,6 @@ properties:
 
   spi-cpol: true
 
-  spi-max-frequency: true
-
   interrupts:
     maxItems: 1
 
@@ -42,20 +40,23 @@ required:
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         /* Example for a I2C device node */
         accelerometer@2a {
             compatible = "adi,adxl345";
-            reg = <0x53>;
+            reg = <0x2a>;
             interrupt-parent = <&gpio0>;
             interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
         };
@@ -63,7 +64,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
new file mode 100644
index 000000000000..c07261c71013
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl355.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers
+
+maintainers:
+  - Puranjay Mohan <puranjay12@gmail.com>
+
+description: |
+  Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers that
+  support both I2C & SPI interfaces
+    https://www.analog.com/en/products/adxl355.html
+    https://www.analog.com/en/products/adxl359.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl355
+      - adi,adxl359
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+    description: |
+      Type for DRDY should be IRQ_TYPE_EDGE_RISING.
+      Three configurable interrupt lines exist.
+
+  interrupt-names:
+    description: Specify which interrupt line is in use.
+    items:
+      enum:
+        - INT1
+        - INT2
+        - DRDY
+    minItems: 1
+    maxItems: 3
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor
+
+  vddio-supply:
+    description: Regulator that provides power to the bus
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@1d {
+            compatible = "adi,adxl355";
+            reg = <0x1d>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "DRDY";
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@0 {
+            compatible = "adi,adxl355";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "DRDY";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
new file mode 100644
index 000000000000..f10d98d34cb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl367.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL367 3-Axis Digital Accelerometer
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.
+
+  The ADXL367 does not alias input signals by to achieve ultralow power
+  consumption, it samples the full bandwidth of the sensor at all
+  data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
+  with a resolution of 0.25mg/LSB on the +-2 g range.
+
+  In addition to its ultralow power consumption, the ADXL367
+  has many features to enable true system level power reduction.
+  It includes a deep multimode output FIFO, a built-in micropower
+  temperature sensor, and an internal ADC for synchronous conversion
+  of an additional analog input.
+    https://www.analog.com/en/products/adxl367.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl367
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@53 {
+        compatible = "adi,adxl367";
+        reg = <0x53>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      accelerometer@0 {
+        compatible = "adi,adxl367";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
index 38b59b6454ce..62465e36a590 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -25,43 +25,44 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/gpio/gpio.h>
-        #include <dt-bindings/interrupt-controller/irq.h>
-        i2c0 {
-                #address-cells = <1>;
-                #size-cells = <0>;
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-                /* Example for a I2C device node */
-                accelerometer@53 {
-                        compatible = "adi,adxl372";
-                        reg = <0x53>;
-                        interrupt-parent = <&gpio>;
-                        interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-                };
+        /* Example for a I2C device node */
+        accelerometer@53 {
+            compatible = "adi,adxl372";
+            reg = <0x53>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
         };
+    };
   - |
-        #include <dt-bindings/gpio/gpio.h>
-        #include <dt-bindings/interrupt-controller/irq.h>
-        spi0 {
-                #address-cells = <1>;
-                #size-cells = <0>;
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-                accelerometer@0 {
-                        compatible = "adi,adxl372";
-                        reg = <0>;
-                        spi-max-frequency = <1000000>;
-                        interrupt-parent = <&gpio>;
-                        interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-                };
+        accelerometer@0 {
+            compatible = "adi,adxl372";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
         };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
index 942b23ad0712..ec643de031a3 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
@@ -20,8 +20,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdda-supply: true
   vddd-supply: true
   vddio-supply: true
@@ -30,12 +28,15 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
index 478e75ae0885..457a709b583c 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
@@ -72,7 +72,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
index 911a1ae9c83f..3cb82576d758 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml
@@ -17,13 +17,13 @@ description: |
 properties:
   compatible:
     enum:
+      - bosch,bmi085-accel
       - bosch,bmi088-accel
+      - bosch,bmi090l-accel
 
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
 
   vddio-supply: true
@@ -48,7 +48,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
index 7c8f8bdc2333..c8659c5eba2a 100644
--- a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml
@@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale MMA7455 and MMA7456 three axis accelerometers
 
 maintainers:
-  - Joachim Eastwood <manabian@gmail.com>
   - Jonathan Cameron <jic23@kernel.org>
 
 description:
@@ -40,13 +39,14 @@ properties:
         - "INT1"
         - "INT2"
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
new file mode 100644
index 000000000000..986df1a6ff0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kx022a.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM/Kionix KX022A Accelerometer
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  KX022A is a 3-axis accelerometer supporting +/- 2G, 4G, 8G and 16G ranges,
+  output data-rates from 0.78Hz to 1600Hz and a hardware-fifo buffering.
+  KX022A can be accessed either via I2C or SPI.
+
+properties:
+  compatible:
+    const: kionix,kx022a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - enum: [INT1, INT2]
+      - const: INT2
+
+  vdd-supply: true
+  io-vdd-supply: true
+
+  mount-matrix:
+    description: |
+      an optional 3x3 mounting rotation matrix.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accel@1f {
+            compatible = "kionix,kx022a";
+            reg = <0x1f>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "INT1";
+
+            io-vdd-supply = <&iovdd>;
+            vdd-supply = <&vdd>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
index 52fa0f7c2d0e..6ddb03f61bd9 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
@@ -21,6 +21,9 @@ properties:
   reg:
     maxItems: 1
 
+  interrupts:
+    maxItems: 1
+
   vdd-supply: true
   vddio-supply: true
 
@@ -41,7 +44,7 @@ examples:
 
         accel@f {
             compatible = "kionix,kxtf9";
-            reg = <0x0F>;
+            reg = <0xf>;
             mount-matrix = "0", "1", "0",
                            "1", "0", "0",
                            "0", "0", "1";
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
index 390b87242fcb..f64d99b35492 100644
--- a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
@@ -29,13 +29,14 @@ properties:
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
new file mode 100644
index 000000000000..d530ec041fe7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MEMSensing digital 3-Axis accelerometer
+
+maintainers:
+  - Dmitry Rokosov <ddrokosov@sberdevices.ru>
+
+description: |
+  MSA311 is a tri-axial, low-g accelerometer with I2C digital output for
+  sensitivity consumer applications. It has dynamical user selectable full
+  scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements
+  with output data rates from 1Hz to 1000Hz.
+  Datasheet can be found at following URL
+  https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf
+
+properties:
+  compatible:
+    const: memsensing,msa311
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accelerometer@62 {
+            compatible = "memsensing,msa311";
+            reg = <0x62>;
+            interrupt-parent = <&gpio_intc>;
+            interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+            vdd-supply = <&vcc_5v>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
index 55fd3548e3b6..00c990caa1e4 100644
--- a/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/murata,sca3300.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     enum:
       - murata,sca3300
+      - murata,scl3300
 
   reg:
     maxItems: 1
@@ -28,7 +29,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
index ad529ab2c6e2..783c7ddfcd90 100644
--- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
@@ -27,8 +27,6 @@ properties:
   vdd-supply:
     description: phandle to the regulator that provides power to the accelerometer
 
-  spi-max-frequency: true
-
   interrupts:
     maxItems: 1
 
@@ -44,12 +42,15 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -64,7 +65,7 @@ examples:
     };
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/adc/adc.yaml b/Documentation/devicetree/bindings/iio/adc/adc.yaml
index db348fcbb52c..261601729745 100644
--- a/Documentation/devicetree/bindings/iio/adc/adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic IIO bindings for ADC channels
+title: IIO Common Properties for ADC Channels
 
 maintainers:
   - Jonathan Cameron <jic23@kernel.org>
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
new file mode 100644
index 000000000000..d00690a8d3fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4130.yaml
@@ -0,0 +1,262 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad4130.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD4130 ADC device driver
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD4130 ADC. Datasheet can be found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD4130-8.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad4130
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: phandle to the master clock (mclk)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    description: |
+      Specify which interrupt pin should be configured as Data Ready / FIFO
+      interrupt.
+      Default if not supplied is int.
+    enum:
+      - int
+      - clk
+      - p2
+      - dout
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  refin1-supply:
+    description: refin1 supply. Can be used as reference for conversion.
+
+  refin2-supply:
+    description: refin2 supply. Can be used as reference for conversion.
+
+  avdd-supply:
+    description: AVDD voltage supply. Can be used as reference for conversion.
+
+  iovdd-supply:
+    description: IOVDD voltage supply. Used for the chip interface.
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  adi,ext-clk-freq-hz:
+    description: Specify the frequency of the external clock.
+    enum: [76800, 153600]
+    default: 76800
+
+  adi,bipolar:
+    description: Specify if the device should be used in bipolar mode.
+    type: boolean
+
+  adi,vbias-pins:
+    description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 16
+    items:
+      minimum: 0
+      maximum: 15
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+patternProperties:
+  "^channel@([0-9a-f])$":
+    type: object
+    $ref: adc.yaml
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: The channel number.
+        minimum: 0
+        maximum: 15
+
+      diff-channels:
+        description: |
+          Besides the analog inputs available, internal inputs can be used.
+          16: Internal temperature sensor.
+          17: AVSS
+          18: Internal reference
+          19: DGND
+          20: (AVDD − AVSS)/6+
+          21: (AVDD − AVSS)/6-
+          22: (IOVDD − DGND)/6+
+          23: (IOVDD − DGND)/6-
+          24: (ALDO − AVSS)/6+
+          25: (ALDO − AVSS)/6-
+          26: (DLDO − DGND)/6+
+          27: (DLDO − DGND)/6-
+          28: V_MV_P
+          29: V_MV_M
+        items:
+          minimum: 0
+          maximum: 29
+
+      adi,reference-select:
+        description: |
+          Select the reference source to use when converting on the
+          specific channel. Valid values are:
+          0: REFIN1(+)/REFIN1(−)
+          1: REFIN2(+)/REFIN2(−)
+          2: REFOUT/AVSS (Internal reference)
+          3: AVDD/AVSS
+          If not specified, REFIN1 is used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        default: 0
+
+      adi,excitation-pin-0:
+        description: |
+          Analog input to apply excitation current to while the channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      adi,excitation-pin-1:
+        description: |
+          Analog input to apply excitation current to while this channel
+          is active.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        default: 0
+
+      adi,excitation-current-0-nanoamp:
+        description: |
+          Excitation current in nanoamps to be applied to pin specified in
+          adi,excitation-pin-0 while this channel is active.
+        enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
+        default: 0
+
+      adi,excitation-current-1-nanoamp:
+        description: |
+          Excitation current in nanoamps to be applied to pin specified in
+          adi,excitation-pin-1 while this channel is active.
+        enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000]
+        default: 0
+
+      adi,burnout-current-nanoamp:
+        description: |
+          Burnout current in nanoamps to be applied for this channel.
+        enum: [0, 500, 2000, 4000]
+        default: 0
+
+      adi,buffered-positive:
+        description: Enable buffered mode for positive input.
+        type: boolean
+
+      adi,buffered-negative:
+        description: Enable buffered mode for negative input.
+        type: boolean
+
+    required:
+      - reg
+      - diff-channels
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad4130";
+        reg = <0>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        spi-max-frequency = <5000000>;
+        interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-parent = <&gpio>;
+
+        channel@0 {
+          reg = <0>;
+
+          adi,reference-select = <2>;
+
+          /* AIN8, AIN9 */
+          diff-channels = <8 9>;
+        };
+
+        channel@1 {
+          reg = <1>;
+
+          adi,reference-select = <2>;
+
+          /* AIN10, AIN11 */
+          diff-channels = <10 11>;
+        };
+
+        channel@2 {
+          reg = <2>;
+
+          adi,reference-select = <2>;
+
+          /* Temperature Sensor, DGND */
+          diff-channels = <16 19>;
+        };
+
+        channel@3 {
+          reg = <3>;
+
+          adi,reference-select = <2>;
+
+          /* Internal reference, DGND */
+          diff-channels = <18 19>;
+        };
+
+        channel@4 {
+          reg = <4>;
+
+          adi,reference-select = <2>;
+
+          /* DGND, DGND */
+          diff-channels = <19 19>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
index 31ffa275f5fa..ce7ba634643c 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r5.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices AD7091R5 4-Channel 12-Bit ADC
 
 maintainers:
-  - Beniamin Bia <beniamin.bia@analog.com>
+  - Michael Hennerich <michael.hennerich@analog.com>
 
 description: |
   Analog Devices AD7091R5 4-Channel 12-Bit ADC
@@ -44,11 +44,11 @@ examples:
         #size-cells = <0>;
 
         adc@2f {
-                compatible = "adi,ad7091r5";
-                reg = <0x2f>;
+            compatible = "adi,ad7091r5";
+            reg = <0x2f>;
 
-                interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-                interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
index fb3d0dae9bae..35ed04350e28 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@@ -52,8 +52,6 @@ properties:
   avdd-supply:
     description: avdd supply can be used as reference for conversion.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
@@ -63,7 +61,7 @@ required:
 
 patternProperties:
   "^channel@([0-9]|1[0-5])$":
-    $ref: "adc.yaml"
+    $ref: adc.yaml
     type: object
     description: |
       Represents the external channels which are connected to the ADC.
@@ -106,7 +104,10 @@ patternProperties:
 
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index 22b7ed3723f6..d521d516088b 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -30,8 +30,6 @@ properties:
 
   spi-cpha: true
 
-  spi-max-frequency: true
-
   clocks:
     maxItems: 1
     description: phandle to the master clock (mclk)
@@ -94,30 +92,33 @@ required:
   - spi-cpol
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-    spi0 {
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      adc@0 {
-        compatible = "adi,ad7192";
-        reg = <0>;
-        spi-max-frequency = <1000000>;
-        spi-cpol;
-        spi-cpha;
-        clocks = <&ad7192_mclk>;
-        clock-names = "mclk";
-        interrupts = <25 0x2>;
-        interrupt-parent = <&gpio>;
-        dvdd-supply = <&dvdd>;
-        avdd-supply = <&avdd>;
-
-        adi,refin2-pins-enable;
-        adi,rejection-60-Hz-enable;
-        adi,buffer-enable;
-        adi,burnout-currents-enable;
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7192";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+            spi-cpha;
+            clocks = <&ad7192_mclk>;
+            clock-names = "mclk";
+            interrupts = <25 0x2>;
+            interrupt-parent = <&gpio>;
+            dvdd-supply = <&dvdd>;
+            avdd-supply = <&avdd>;
+
+            adi,refin2-pins-enable;
+            adi,rejection-60-Hz-enable;
+            adi,buffer-enable;
+            adi,burnout-currents-enable;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
new file mode 100644
index 000000000000..dfb8f305e2f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7280a.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7280a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7280a Lithium Ion Battery Monitoring System
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Bindings for the Analog Devices AD7280a Battery Monitoring System.
+  Used in devices such as hybrid electric cars, battery backup and power tools.
+  Multiple chips can be daisy chained and accessed via a single SPI interface.
+  Data sheet found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7280A.pdf
+
+properties:
+  compatible:
+    const: adi,ad7280a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: IRQ line for the ADC
+    maxItems: 1
+
+  adi,voltage-alert-last-chan:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Allows limiting of scope of which channels are considered for voltage
+      alerts, typically because not all are wired to anything. Only applies to
+      last device in the daisy chain.
+    default: 5
+    enum: [3, 4, 5]
+
+  adi,acquisition-time-ns:
+    description:
+      Additional time may be needed to charge the sampling capacitors depending
+      on external writing.
+    default: 400
+    enum: [400, 800, 1200, 1600]
+
+  adi,thermistor-termination:
+    type: boolean
+    description:
+      Enable the thermistor termination function.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      adc@0 {
+        compatible = "adi,ad7280a";
+        reg = <0>;
+        spi-max-frequency = <700000>;
+        interrupt-parent = <&gpio>;
+        interrupts = <25 2>;
+        adi,thermistor-termination;
+        adi,acquisition-time-ns = <800>;
+        adi,voltage-alert-last-chan = <5>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
index 930f9e3904d7..0b2f5dc80600 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7291.yaml
@@ -44,4 +44,3 @@ examples:
       };
     };
 ...
-
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
index a3e39a40c9b3..7cc4ddc4e9b7 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@@ -30,8 +30,6 @@ properties:
 
   spi-cpha: true
 
-  spi-max-frequency: true
-
   '#address-cells':
     const: 1
 
@@ -45,7 +43,7 @@ required:
 
 patternProperties:
   "^channel@[0-7]$":
-    $ref: "adc.yaml"
+    $ref: adc.yaml
     type: object
     description: |
       Represents the external channels which are connected to the ADC.
@@ -65,7 +63,10 @@ patternProperties:
 
     additionalProperties: true
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
index ca414bb396c5..cd8ac5162d27 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7298.yaml
@@ -24,13 +24,15 @@ properties:
 
   vref-supply: true
   vdd-supply: true
-  spi-max-frequency: true
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
index cf711082ad7d..44c671eeda73 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7476.yaml
@@ -66,8 +66,6 @@ properties:
       to the other supplies. Needed to be able to establish channel scaling
       unless there is also an internal reference available (e.g. ad7091r)
 
-  spi-max-frequency: true
-
   adi,conversion-start-gpios:
     description: A GPIO used to trigger the start of a conversion
     maxItems: 1
@@ -76,9 +74,9 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
-
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
   # Devices where reference is vcc
   - if:
       properties:
@@ -98,6 +96,7 @@ allOf:
               - ti,adc121s
               - ti,ads7866
               - ti,ads7868
+    then:
       required:
         - vcc-supply
   # Devices with a vref
@@ -157,6 +156,8 @@ allOf:
       properties:
         adi,conversion-start-gpios: false
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 73775174cf57..7fa46df1f4fb 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -7,8 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices AD7606 Simultaneous Sampling ADC
 
 maintainers:
-  - Beniamin Bia <beniamin.bia@analog.com>
-  - Stefan Popa <stefan.popa@analog.com>
+  - Michael Hennerich <michael.hennerich@analog.com>
 
 description: |
   Analog Devices AD7606 Simultaneous Sampling ADC
@@ -33,8 +32,6 @@ properties:
 
   spi-cpol: true
 
-  spi-max-frequency: true
-
   avcc-supply: true
 
   interrupts:
@@ -106,36 +103,39 @@ required:
   - interrupts
   - adi,conversion-start-gpios
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
         adc@0 {
-                compatible = "adi,ad7606-8";
-                reg = <0>;
-                spi-max-frequency = <1000000>;
-                spi-cpol;
-                spi-cpha;
-
-                avcc-supply = <&adc_vref>;
-
-                interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-                interrupt-parent = <&gpio>;
-
-                adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-                reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
-                adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-                adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
-                                               <&gpio 23 GPIO_ACTIVE_HIGH>,
-                                               <&gpio 26 GPIO_ACTIVE_HIGH>;
-                standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
-                adi,sw-mode;
+            compatible = "adi,ad7606-8";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            spi-cpol;
+            spi-cpha;
+
+            avcc-supply = <&adc_vref>;
+
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+
+            adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+            adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+            adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
+                                           <&gpio 23 GPIO_ACTIVE_HIGH>,
+                                           <&gpio 26 GPIO_ACTIVE_HIGH>;
+            standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+            adi,sw-mode;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
index a85a28145ef6..3ce59d4d065f 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml
@@ -50,8 +50,6 @@ properties:
   reset-gpios:
     maxItems: 1
 
-  spi-max-frequency: true
-
   spi-cpol: true
 
   spi-cpha: true
@@ -88,7 +86,10 @@ patternProperties:
       - reg
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
index a67ba67dab51..5fcc8dd012f1 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -72,7 +72,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
index e82194974eea..85148338c597 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
@@ -8,11 +8,10 @@ title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs.
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Patrick Vasseur <patrick.vasseur@c-s.fr>
 
 description: |
   Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908,
-   AD7918, AD7928 8 Channels ADCs.
+   AD7918, AD7927, AD7928 8 Channels ADCs.
 
   Specifications about the part can be found at:
     https://www.analog.com/media/en/technical-documentation/data-sheets/AD7923.pdf
@@ -21,14 +20,22 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - adi,ad7904
-      - adi,ad7914
-      - adi,ad7923
-      - adi,ad7924
-      - adi,ad7908
-      - adi,ad7918
-      - adi,ad7928
+    oneOf:
+      - enum:
+          - adi,ad7904
+          - adi,ad7908
+          - adi,ad7914
+          - adi,ad7918
+          - adi,ad7923
+          - adi,ad7928
+      - const: adi,ad7924
+        deprecated: true
+      - items:
+          - const: adi,ad7924
+          - const: adi,ad7923
+      - items:
+          - const: adi,ad7927
+          - const: adi,ad7928
 
   reg:
     maxItems: 1
@@ -37,19 +44,24 @@ properties:
     description: |
       The regulator supply for ADC reference voltage.
 
+  adi,range-double:
+    description: Sets the analog input range from 0 to 2xVREF.
+    type: boolean
+
   '#address-cells':
     const: 1
 
   '#size-cells':
     const: 0
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
index 9b56bd4d5510..9ee4d977c5ed 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
@@ -26,21 +26,46 @@ properties:
   reg:
     maxItems: 1
 
+  vrefin-supply:
+    description:
+      Buffered ADC reference voltage supply.
+
   vref-supply:
     description:
-      ADC reference voltage supply
+      Unbuffered ADC reference voltage supply.
+
+  adi,internal-ref-microvolt:
+    description: |
+      Internal reference voltage selection in microvolts.
+
+      If no internal reference is specified, the channel will default to the
+      external reference defined by vrefin-supply (or vref-supply).
+      vrefin-supply will take precedence over vref-supply if both are defined.
+
+      If no supplies are defined, the reference selection will default to
+      4096mV internal reference.
 
-  spi-max-frequency: true
+    enum: [2500000, 4096000]
+    default: 4096000
 
-  "#io-channel-cells":
+
+  '#io-channel-cells':
+    const: 1
+
+  '#address-cells':
     const: 1
 
+  '#size-cells':
+    const: 0
+
 required:
   - compatible
   - reg
-  - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -49,9 +74,30 @@ examples:
         #size-cells = <0>;
 
         adc@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
             compatible = "adi,ad7949";
             reg = <0>;
             vref-supply = <&vdd_supply>;
         };
+
+        adc@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "adi,ad7949";
+            reg = <1>;
+            vrefin-supply = <&vdd_supply>;
+        };
+
+        adc@2 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "adi,ad7949";
+            reg = <2>;
+            adi,internal-ref-microvolt = <4096000>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
new file mode 100644
index 000000000000..433ed2c9295f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad799x.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad799x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD799x analog to digital converters
+
+maintainers:
+  - Michael Hennerich <Michael.Hennerich@analog.com>
+
+description: |
+    Support for Analog Devices AD7991, AD7992, AD7993, AD7994, AD7995, AD7997, AD7998,
+    AD7999 and similar analog to digital converters.
+    Specifications on the converters can be found at:
+    AD7991, AD7995, AD7999:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7991_7995_7999.pdf
+    AD7992:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7992.pdf
+    AD7993, AD7994:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7993_7994.pdf
+    AD7997, AD7998:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7997_7998.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7991
+      - adi,ad7992
+      - adi,ad7993
+      - adi,ad7994
+      - adi,ad7995
+      - adi,ad7997
+      - adi,ad7998
+      - adi,ad7999
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vcc-supply:
+    description:
+      ADC power supply
+
+  vref-supply:
+    description:
+      ADC reference voltage supply, optional for AD7991, AD7995 and AD7999
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc1: adc@28 {
+            reg = <0x28>;
+            compatible = "adi,ad7991";
+            interrupts = <13 2>;
+            interrupt-parent = <&gpio6>;
+
+            vcc-supply = <&vcc_3v3>;
+            vref-supply = <&adc_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
index b5aed40d8a50..7aa748d6b7a0 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
@@ -8,7 +8,6 @@ title: Analog Devices AD9467 and similar High-Speed ADCs
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
 
 description: |
   The AD9467 and the parts similar with it, are high-speed analog-to-digital
@@ -65,10 +64,10 @@ examples:
         #size-cells = <0>;
 
         adc@0 {
-          compatible = "adi,ad9467";
-          reg = <0>;
-          clocks = <&adc_clk>;
-          clock-names = "adc-clk";
+            compatible = "adi,ad9467";
+            reg = <0>;
+            clocks = <&adc_clk>;
+            clock-names = "adc-clk";
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
index 0924b2b4972b..9996dd93f84b 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
@@ -8,7 +8,6 @@ title: Analog Devices AXI ADC IP core
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
 
 description: |
   Analog Devices Generic AXI ADC IP core for interfacing an ADC device
@@ -52,11 +51,11 @@ additionalProperties: false
 examples:
   - |
     axi-adc@44a00000 {
-          compatible = "adi,axi-adc-10.0.a";
-          reg = <0x44a00000 0x10000>;
-          dmas = <&rx_dma 0>;
-          dma-names = "rx";
+        compatible = "adi,axi-adc-10.0.a";
+        reg = <0x44a00000 0x10000>;
+        dmas = <&rx_dma 0>;
+        dma-names = "rx";
 
-          adi,adc-dev = <&spi_adc>;
+        adi,adc-dev = <&spi_adc>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml b/Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml
new file mode 100644
index 000000000000..53f9feff137b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/adi,max11410.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2022 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,max11410.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices MAX11410 ADC device driver
+
+maintainers:
+  - Ibrahim Tilki <Ibrahim.Tilki@analog.com>
+
+description: |
+  Bindings for the Analog Devices MAX11410 ADC device. Datasheet can be
+  found here:
+    https://datasheets.maximintegrated.com/en/ds/MAX11410.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,max11410
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    description: Name of the gpio pin of max11410 used for IRQ
+    minItems: 1
+    items:
+      - enum: [gpio0, gpio1]
+      - const: gpio1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  avdd-supply:
+    description: Optional avdd supply. Used as reference when no explicit reference supplied.
+
+  vref0p-supply:
+    description: vref0p supply can be used as reference for conversion.
+
+  vref1p-supply:
+    description: vref1p supply can be used as reference for conversion.
+
+  vref2p-supply:
+    description: vref2p supply can be used as reference for conversion.
+
+  vref0n-supply:
+    description: vref0n supply can be used as reference for conversion.
+
+  vref1n-supply:
+    description: vref1n supply can be used as reference for conversion.
+
+  vref2n-supply:
+    description: vref2n supply can be used as reference for conversion.
+
+  spi-max-frequency:
+    maximum: 8000000
+
+patternProperties:
+  "^channel(@[0-9])?$":
+    $ref: adc.yaml
+    type: object
+    description: Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: The channel number in single-ended mode.
+        minimum: 0
+        maximum: 9
+
+      adi,reference:
+        description: |
+          Select the reference source to use when converting on
+          the specific channel. Valid values are:
+          0: VREF0P/VREF0N
+          1: VREF1P/VREF1N
+          2: VREF2P/VREF2N
+          3: AVDD/AGND
+          4: VREF0P/AGND
+          5: VREF1P/AGND
+          6: VREF2P/AGND
+          If this field is left empty, AVDD/AGND is selected.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 4, 5, 6]
+        default: 3
+
+      adi,input-mode:
+        description: |
+          Select signal path of input channels. Valid values are:
+          0: Buffered, low-power, unity-gain path (default)
+          1: Bypass path
+          2: PGA path
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+        default: 0
+
+      diff-channels: true
+
+      bipolar: true
+
+      settling-time-us: true
+
+      adi,buffered-vrefp:
+        description: Enable buffered mode for positive reference.
+        type: boolean
+
+      adi,buffered-vrefn:
+        description: Enable buffered mode for negative reference.
+        type: boolean
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            reg = <0>;
+            compatible = "adi,max11410";
+            spi-max-frequency = <8000000>;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-names = "gpio1";
+
+            avdd-supply = <&adc_avdd>;
+
+            vref1p-supply = <&adc_vref1p>;
+            vref1n-supply = <&adc_vref1n>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                diff-channels = <2 3>;
+                adi,reference = <1>;
+                bipolar;
+                settling-time-us = <100000>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                diff-channels = <7 9>;
+                adi,reference = <5>;
+                adi,input-mode = <2>;
+                settling-time-us = <50000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml
index 15c514b83583..a73a355fc665 100644
--- a/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/allwinner,sun8i-a33-ths.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A33 Thermal Sensor Device Tree Bindings
+title: Allwinner A33 Thermal Sensor
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
new file mode 100644
index 000000000000..5c08d8b6e995
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC that forms part of an ASPEED server management processor.
+
+maintainers:
+  - Billy Tsai <billy_tsai@aspeedtech.com>
+
+description: |
+  • 10-bits resolution for 16 voltage channels.
+  • The device split into two individual engine and each contains 8 voltage
+  channels.
+  • Channel scanning can be non-continuous.
+  • Programmable ADC clock frequency.
+  • Programmable upper and lower threshold for each channels.
+  • Interrupt when larger or less than threshold for each channels.
+  • Support hysteresis for each channels.
+  • Built-in a compensating method.
+  • Built-in a register to trim internal reference voltage.
+  • Internal or External reference voltage.
+  • Support 2 Internal reference voltage 1.2v or 2.5v.
+  • Integrate dividing circuit for battery sensing.
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2600-adc0
+      - aspeed,ast2600-adc1
+    description:
+      Their trimming data, which is used to calibrate internal reference volage,
+      locates in different address of OTP.
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      Input clock used to derive the sample clock. Expected to be the
+      SoC's APB clock.
+
+  resets:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  vref-supply:
+    description:
+      The external regulator supply ADC reference voltage.
+
+  aspeed,int-vref-microvolt:
+    enum: [1200000, 2500000]
+    description:
+      ADC internal reference voltage in microvolts.
+
+  aspeed,battery-sensing:
+    type: boolean
+    description:
+      Inform the driver that last channel will be used to sensor battery.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ast2600-clock.h>
+    adc0: adc@1e6e9000 {
+        compatible = "aspeed,ast2600-adc0";
+        reg = <0x1e6e9000 0x100>;
+        clocks = <&syscon ASPEED_CLK_APB2>;
+        resets = <&syscon ASPEED_RESET_ADC>;
+        #io-channel-cells = <1>;
+        aspeed,int-vref-microvolt = <2500000>;
+    };
+    adc1: adc@1e6e9100 {
+        compatible = "aspeed,ast2600-adc1";
+        reg = <0x1e6e9100 0x100>;
+        clocks = <&syscon ASPEED_CLK_APB2>;
+        resets = <&syscon ASPEED_RESET_ADC>;
+        #io-channel-cells = <1>;
+        aspeed,int-vref-microvolt = <2500000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
index 79c13b408eda..4817b840977a 100644
--- a/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
@@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: AT91 SAMA5D2 Analog to Digital Converter (ADC)
 
 maintainers:
-  - Ludovic Desroches <ludovic.desroches@atmel.com>
   - Eugen Hristev <eugen.hristev@microchip.com>
 
 properties:
@@ -15,6 +14,7 @@ properties:
     enum:
       - atmel,sama5d2-adc
       - microchip,sam9x60-adc
+      - microchip,sama7g5-adc
 
   reg:
     maxItems: 1
@@ -41,7 +41,7 @@ properties:
     description: Startup time expressed in ms, it depends on SoC.
 
   atmel,trigger-edge-type:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       One of possible edge types for the ADTRG hardware trigger pin.
       When the specific edge type is detected, the conversion will
@@ -71,7 +71,6 @@ required:
   - atmel,min-sample-rate-hz
   - atmel,max-sample-rate-hz
   - atmel,startup-time-ms
-  - atmel,trigger-edge-type
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
index 77605f17901c..9c57eb13f892 100644
--- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: AVIA HX711 ADC chip for weight cells
 
diff --git a/Documentation/devicetree/bindings/iio/adc/cirrus,ep9301-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cirrus,ep9301-adc.yaml
new file mode 100644
index 000000000000..6d4fb3e1d2a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/cirrus,ep9301-adc.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/cirrus,ep9301-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP930x internal ADC
+
+description: |
+  Cirrus Logic EP9301/EP9302 SoCs' internal ADC block.
+
+  User's manual:
+  https://cdn.embeddedts.com/resource-attachments/ts-7000_ep9301-ug.pdf
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+
+properties:
+  compatible:
+    const: cirrus,ep9301-adc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    adc: adc@80900000 {
+        compatible = "cirrus,ep9301-adc";
+        reg = <0x80900000 0x28>;
+        clocks = <&syscon 24>;
+        interrupt-parent = <&vic1>;
+        interrupts = <30>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
index 1ca571056ea9..c770ff4998f5 100644
--- a/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
@@ -7,14 +7,21 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ADC found on Freescale vf610 and similar SoCs
 
 maintainers:
-  - Fugang Duan <fugang.duan@nxp.com>
+  - Haibo Chen <haibo.chen@nxp.com>
 
 description:
   ADCs found on vf610/i.MX6slx and upward SoCs from Freescale.
 
 properties:
   compatible:
-    const: fsl,vf610-adc
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx6sx-adc
+              - fsl,imx6ul-adc
+          - const: fsl,vf610-adc
+      - items:
+          - const: fsl,vf610-adc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
index 52490cbb0af0..56bcbe5dcd79 100644
--- a/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/holt,hi8435.yaml
@@ -24,8 +24,6 @@ properties:
       GPIO used for controlling the reset pin
     maxItems: 1
 
-  spi-max-frequency: true
-
   "#io-channel-cells":
     const: 1
 
@@ -33,7 +31,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
index 3eb7aa8822c3..9cd0fd539782 100644
--- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
@@ -2,10 +2,10 @@
 # Copyright 2019-2020 Artur Rojek
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic JZ47xx ADC controller IIO bindings
+title: Ingenic JZ47xx ADC controller IIO
 
 maintainers:
   - Artur Rojek <contact@artur-rojek.eu>
@@ -74,18 +74,18 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4740-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4740-cgu.h>
     #include <dt-bindings/iio/adc/ingenic,adc.h>
 
     adc@10070000 {
-            compatible = "ingenic,jz4740-adc";
-            #io-channel-cells = <1>;
+        compatible = "ingenic,jz4740-adc";
+        #io-channel-cells = <1>;
 
-            reg = <0x10070000 0x30>;
+        reg = <0x10070000 0x30>;
 
-            clocks = <&cgu JZ4740_CLK_ADC>;
-            clock-names = "adc";
+        clocks = <&cgu JZ4740_CLK_ADC>;
+        clock-names = "adc";
 
-            interrupt-parent = <&intc>;
-            interrupts = <18>;
+        interrupt-parent = <&intc>;
+        interrupts = <18>;
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
index 0bd2fc0356c8..5207c919abe0 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -22,15 +22,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency:
-    description: maximal spi bus frequency supported
-
 required:
   - compatible
   - vref-supply
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
index c1772b568cd1..875f394576c2 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
@@ -13,10 +13,14 @@ description: |
   16bit ADC supporting up to 16 single ended or 8 differential inputs.
   I2C interface.
 
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf
+
 properties:
   compatible:
-    const:
-      lltc,ltc2497
+    enum:
+      - lltc,ltc2497
+      - lltc,ltc2499
 
   reg: true
   vref-supply: true
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
index 46b7747076b9..e4b362113509 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1027.yaml
@@ -45,14 +45,17 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
     spi {
-       #address-cells = <1>;
-       #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
         maxadc: adc@0 {
             compatible = "maxim,max1027";
             reg = <0>;
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
index 0cf87556ef82..4f74cb33383a 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
@@ -26,13 +26,16 @@ properties:
     minimum: 100000
     maximum: 4800000
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vref-supply
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
index e948b3e37b0c..bb336e33ebe2 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
@@ -28,23 +28,25 @@ properties:
   vref-supply:
     description: External reference, needed to establish input scaling
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: maxim,max1118
-then:
-  required:
-    - vref-supply
-else:
-  properties:
-    vref-supply: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max1118
+    then:
+      required:
+        - vref-supply
+    else:
+      properties:
+        vref-supply: false
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
new file mode 100644
index 000000000000..5f9e043cf5cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max11205.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/maxim,max11205.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX11205 ADC
+
+maintainers:
+  - Ramona Bolboaca <ramona.bolboaca@analog.com>
+
+description: |
+  The MAX11205 is an ultra-low-power (< 300FA max active current),
+  high-resolution, serial-output ADC.
+
+  https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max11205a
+      - maxim,max11205b
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 5000000
+
+  spi-cpha: true
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage. This is a differential
+      reference. It is equal to the V_REFP - V_REFN. The maximum value is 3.6V.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-max-frequency
+  - spi-cpha
+  - vref-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@0 {
+            compatible = "maxim,max11205a";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpha;
+            interrupt-parent = <&gpio>;
+            interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+            vref-supply = <&max11205_vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
index 50bcd72ac9d6..60d7b34e3286 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Jonathan Cameron <jic23@kernel.org>
 
 description: |
-  Family of simple ADCs with i2c inteface and internal references.
+  Family of simple ADCs with i2c interface and internal references.
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
index 4c7e0d94bff1..ef8d51e74c08 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
@@ -39,22 +39,23 @@ properties:
       thus enabling power-down mode.
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - vdd-supply
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     spi {
-      #address-cells = <1>;
-      #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
         adc@0 {
             compatible = "maxim,max1241";
diff --git a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml
index e04f09f35601..96f3f535fe34 100644
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Jonathan Cameron <jic23@kernel.org>
 
 description: |
-   Family of ADCs with i2c inteface, internal references and threshold
+   Family of ADCs with i2c interface, internal references and threshold
    monitoring.
 
 properties:
diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
index b939f9652e3a..7f79a06e76f5 100644
--- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
@@ -34,6 +34,8 @@ properties:
       - items:
           - enum:
               - mediatek,mt8183-auxadc
+              - mediatek,mt8186-auxadc
+              - mediatek,mt8188-auxadc
               - mediatek,mt8195-auxadc
               - mediatek,mt8516-auxadc
           - const: mediatek,mt8173-auxadc
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
index cbbac4ce56d6..18108f0f3731 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Oskar Andero <oskar.andero@gmail.com>
 
 description: |
-   Family of simple ADCs with an I2C inteface.
+   Family of simple ADCs with a SPI interface.
 
 properties:
   compatible:
@@ -32,7 +32,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
   spi-cpha: true
   spi-cpol: true
 
@@ -51,7 +50,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index 95ab285f4eba..f7b3fde4115a 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Microchip MCP3911 Dual channel analog front end (ADC)
 
@@ -36,6 +36,13 @@ properties:
     description: IRQ line of the ADC
     maxItems: 1
 
+  microchip,data-ready-hiz:
+    description:
+      Data Ready Pin Inactive State Control
+      true = The DR pin state is high-impedance
+      false = The DR pin state is logic high
+    type: boolean
+
   microchip,device-addr:
     description: Device address when multiple MCP3911 chips are present on the same SPI bus.
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -51,7 +58,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml b/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
index a6cb857a232d..9ceb6f18c854 100644
--- a/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/motorola,cpcap-adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Motorola CPCAP PMIC ADC binding
+title: Motorola CPCAP PMIC ADC
 
 maintainers:
   - Tony Lindgren <tony@atomide.com>
diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
index 001cf263b7d5..fede2aa64092 100644
--- a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
@@ -10,11 +10,14 @@ maintainers:
   - Tomer Maimon <tmaimon77@gmail.com>
 
 description:
-  The NPCM ADC is a 10-bit converter for eight channel inputs.
+  The NPCM7XX ADC is a 10-bit converter and NPCM8XX ADC is a 12-bit converter,
+  both have eight channel inputs.
 
 properties:
   compatible:
-    const: nuvoton,npcm750-adc
+    enum:
+      - nuvoton,npcm750-adc
+      - nuvoton,npcm845-adc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml
new file mode 100644
index 000000000000..63369ba388e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nxp,imx8qxp-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP IMX8QXP ADC
+
+maintainers:
+  - Cai Huoqing <caihuoqing@baidu.com>
+
+description:
+  Supports the ADC found on the IMX8QXP SoC.
+
+properties:
+  compatible:
+    const: nxp,imx8qxp-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: per
+      - const: ipg
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - assigned-clocks
+  - assigned-clock-rates
+  - power-domains
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        adc@5a880000 {
+            compatible = "nxp,imx8qxp-adc";
+            reg = <0x0 0x5a880000 0x0 0x10000>;
+            interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk IMX_SC_R_ADC_0>,
+                     <&clk IMX_SC_R_ADC_0>;
+            clock-names = "per", "ipg";
+            assigned-clocks = <&clk IMX_SC_R_ADC_0>;
+            assigned-clock-rates = <24000000>;
+            power-domains = <&pd IMX_SC_R_ADC_0>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
new file mode 100644
index 000000000000..dacc526dc695
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nxp,imx93-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP iMX93 ADC
+
+maintainers:
+  - Haibo Chen <haibo.chen@nxp.com>
+
+description:
+  The ADC on iMX93 is a 8-channel 12-bit 1MS/s ADC with 4 channels
+  connected to pins. it support normal and inject mode, include
+  One-Shot and Scan (continuous) conversions. Programmable DMA
+  enables for each channel  Also this ADC contain alternate analog
+  watchdog thresholds, select threshold through input ports. And
+  also has Self-test logic and Software-initiated calibration.
+
+properties:
+  compatible:
+    const: nxp,imx93-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: WDGnL, watchdog threshold interrupt requests.
+      - description: WDGnH, watchdog threshold interrupt requests.
+      - description: normal conversion, include EOC (End of Conversion),
+          ECH (End of Chain), JEOC (End of Injected Conversion) and
+          JECH (End of injected Chain).
+      - description: Self-testing Interrupts.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+  vref-supply:
+    description:
+      The reference voltage which used to establish channel scaling.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx93-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@44530000 {
+            compatible = "nxp,imx93-adc";
+            reg = <0x44530000 0x10000>;
+            interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk IMX93_CLK_ADC1_GATE>;
+            clock-names = "ipg";
+            vref-supply = <&reg_vref_1v8>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml
index 6404fb73f8ed..70b38038a080 100644
--- a/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,lpc1850-adc.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/iio/adc/nxp,lpc1850-adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP LPC1850 ADC bindings
+title: NXP LPC1850 ADC
 
 maintainers:
-  - Joachim Eastwood <manabian@gmail.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description:
   Supports the ADC found on the LPC1850 SoC.
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
index d186b713d6a7..58ea1ca4a5ee 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml
@@ -160,7 +160,7 @@ examples:
             };
             ref_muxoff: adc-channel@f {
                 reg = <0x00 0x0f>;
-           };
+            };
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
index 27e3108661c0..73def67fbe01 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
@@ -18,7 +18,11 @@ description: |
 
 properties:
   compatible:
-    const: qcom,spmi-iadc
+    items:
+      - enum:
+          - qcom,pm8226-iadc
+          - qcom,pm8941-iadc
+      - const: qcom,spmi-iadc
 
   reg:
     description: IADC base address and length in the SPMI PMIC register map
@@ -46,12 +50,12 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    spmi_bus {
+    spmi {
         #address-cells = <1>;
         #size-cells = <0>;
         pmic_iadc: adc@3600 {
-            compatible = "qcom,spmi-iadc";
-            reg = <0x3600 0x100>;
+            compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
+            reg = <0x3600>;
             interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
             qcom,external-resistor-micro-ohms = <10000>;
             #io-channel-cells  = <1>;
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
new file mode 100644
index 000000000000..b3a626389870
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-rradc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-rradc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm's SPMI PMIC Round Robin ADC
+
+maintainers:
+  - Caleb Connolly <caleb.connolly@linaro.org>
+
+description: |
+  The Qualcomm SPMI Round Robin ADC (RRADC) provides interface to clients to
+  read the voltage, current and temperature for supported peripherals such as
+  the battery thermistor die temperature, charger temperature, USB and DC input
+  voltage / current and battery ID resistor.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pmi8998-rradc
+      - qcom,pm660-rradc
+
+  reg:
+    maxItems: 1
+
+  qcom,batt-id-delay-ms:
+    description: Sets the hardware settling time for the battery ID resistor.
+    enum: [0, 1, 4, 12, 20, 40, 60, 80]
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic_rradc: adc@4500 {
+            compatible = "qcom,pmi8998-rradc";
+            reg = <0x4500>;
+            #io-channel-cells  = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
index 74a4a9d95798..bd6e0d6f6e0c 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
@@ -22,13 +22,11 @@ properties:
       - items:
           - const: qcom,pms405-adc
           - const: qcom,spmi-adc-rev2
-
-      - items:
-          - enum:
-              - qcom,spmi-vadc
-              - qcom,spmi-adc5
-              - qcom,spmi-adc-rev2
-              - qcom,spmi-adc7
+      - enum:
+          - qcom,spmi-vadc
+          - qcom,spmi-adc5
+          - qcom,spmi-adc-rev2
+          - qcom,spmi-adc7
 
   reg:
     description: VADC base address in the SPMI PMIC register map
@@ -58,6 +56,7 @@ required:
 patternProperties:
   "^.*@[0-9a-f]+$":
     type: object
+    additionalProperties: false
     description: |
       Represents the external channels which are connected to the ADC.
       For compatible property "qcom,spmi-vadc" following channels, also known as
@@ -237,42 +236,72 @@ additionalProperties: false
 
 examples:
   - |
-    spmi_bus {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      /* VADC node */
-      pmic_vadc: adc@3100 {
-        compatible = "qcom,spmi-vadc";
-        reg = <0x3100>;
-        interrupts = <0x0 0x31 0x0 0x1>;
+    spmi {
         #address-cells = <1>;
         #size-cells = <0>;
-        #io-channel-cells = <1>;
-
-        /* Channel node */
-        adc-chan@39 {
-          reg = <0x39>;
-          qcom,decimation = <512>;
-          qcom,ratiometric;
-          qcom,hw-settle-time = <200>;
-          qcom,avg-samples = <1>;
-          qcom,pre-scaling = <1 3>;
-        };
-
-        adc-chan@9 {
-          reg = <0x9>;
-        };
-
-        adc-chan@a {
-          reg = <0xa>;
+        /* VADC node */
+        pmic_vadc: adc@3100 {
+            compatible = "qcom,spmi-vadc";
+            reg = <0x3100>;
+            interrupts = <0x0 0x31 0x0 0x1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Channel node */
+            adc-chan@39 {
+                reg = <0x39>;
+                qcom,decimation = <512>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+                qcom,avg-samples = <1>;
+                qcom,pre-scaling = <1 3>;
+            };
+
+            adc-chan@9 {
+                reg = <0x9>;
+            };
+
+            adc-chan@a {
+                reg = <0xa>;
+            };
+
+            adc-chan@e {
+                reg = <0xe>;
+            };
+
+            adc-chan@f {
+                reg = <0xf>;
+            };
         };
+    };
 
-        adc-chan@e {
-          reg = <0xe>;
-        };
+  - |
+    #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+    #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
 
-        adc-chan@f {
-          reg = <0xf>;
+    spmi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@3100 {
+            reg = <0x3100>;
+            compatible = "qcom,spmi-adc7";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            /* Other properties are omitted */
+            xo-therm@44 {
+                reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+
+            conn-therm@47 {
+                reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
         };
-      };
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
index c115e2e99bd9..1c7aee5ed3e0 100644
--- a/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,rcar-gyroadc.yaml
@@ -34,9 +34,11 @@ properties:
   clock-names:
     const: fck
 
-  power-domains: true
+  power-domains:
+    maxItems: 1
 
-  resets: true
+  resets:
+    maxItems: 1
 
   "#address-cells":
     const: 1
@@ -51,6 +53,8 @@ required:
   - reg
   - clocks
   - clock-names
+  - power-domains
+  - resets
   - "#address-cells"
   - "#size-cells"
 
@@ -108,36 +112,30 @@ patternProperties:
 
 examples:
   - |
-    #include <dt-bindings/clock/r8a7791-clock.h>
+    #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
     #include <dt-bindings/power/r8a7791-sysc.h>
-    soc {
-        #address-cells = <2>;
-        #size-cells = <2>;
-
-        adc@e6e54000 {
-            compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc";
-            reg = <0 0xe6e54000 0 64>;
-            clocks = <&mstp9_clks R8A7791_CLK_GYROADC>;
-            clock-names = "fck";
-            power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-
-            pinctrl-0 = <&adc_pins>;
-            pinctrl-names = "default";
-
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            adc@0 {
-                reg = <0>;
-                compatible = "maxim,max1162";
-                vref-supply = <&vref_max1162>;
-            };
-
-            adc@1 {
-                reg = <1>;
-                compatible = "maxim,max1162";
-                vref-supply = <&vref_max1162>;
-            };
+
+    adc@e6e54000 {
+        compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc";
+        reg = <0xe6e54000 64>;
+        clocks = <&cpg CPG_MOD 901>;
+        clock-names = "fck";
+        power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+        resets = <&cpg 901>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            reg = <0>;
+            compatible = "maxim,max1162";
+            vref-supply = <&vref_max1162>;
+        };
+
+        adc@1 {
+            reg = <1>;
+            compatible = "maxim,max1162";
+            vref-supply = <&vref_max1162>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
index c80201d6a716..ba86c7b7d622 100644
--- a/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
@@ -19,7 +19,9 @@ properties:
   compatible:
     items:
       - enum:
-          - renesas,r9a07g044-adc   # RZ/G2{L,LC}
+          - renesas,r9a07g043-adc   # RZ/G2UL and RZ/Five
+          - renesas,r9a07g044-adc   # RZ/G2L
+          - renesas,r9a07g054-adc   # RZ/V2L
       - const: renesas,rzg2l-adc
 
   reg:
@@ -67,7 +69,7 @@ required:
 
 patternProperties:
   "^channel@[0-7]$":
-    $ref: "adc.yaml"
+    $ref: adc.yaml
     type: object
     description: |
       Represents the external channels which are connected to the ADC.
@@ -75,16 +77,35 @@ patternProperties:
     properties:
       reg:
         description: |
-          The channel number. It can have up to 8 channels numbered from 0 to 7.
-        items:
-          - minimum: 0
-            maximum: 7
+          The channel number.
 
     required:
       - reg
 
     additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g043-adc
+    then:
+      patternProperties:
+        "^channel@[2-7]$": false
+        "^channel@[0-1]$":
+          properties:
+            reg:
+              minimum: 0
+              maximum: 1
+    else:
+      patternProperties:
+        "^channel@[0-7]$":
+          properties:
+            reg:
+              minimum: 0
+              maximum: 7
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
new file mode 100644
index 000000000000..88e008629ea8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/richtek,rtq6056.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
+  interface, and the device provides full information for system by reading
+  out the loading current and power.
+
+  The device monitors both of the drops across sense resistor and the BUS
+  voltage, converts into the current in amperes, and power in watts through
+  internal analog-to-digital converter ADC. The programmable calibration,
+  adjustable conversion time, and averaging function are also built in for
+  more design flexibility.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf
+
+properties:
+  compatible:
+    const: richtek,rtq6056
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  shunt-resistor-micro-ohms:
+    description: Shunt IN+/IN- sensing node resistor
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      adc@40 {
+        compatible = "richtek,rtq6056";
+        reg = <0x40>;
+        #io-channel-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
index e512a14e41b4..da50b529c157 100644
--- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
@@ -22,6 +22,7 @@ properties:
               - rockchip,rk3328-saradc
               - rockchip,rk3568-saradc
               - rockchip,rv1108-saradc
+              - rockchip,rv1126-saradc
           - const: rockchip,rk3399-saradc
 
   reg:
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index c65921e66dc1..582d0a03b814 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -52,7 +52,7 @@ properties:
   vdd-supply: true
 
   samsung,syscon-phandle:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description:
       Phandle to the PMU system controller node (to access the ADC_PHY
       register on Exynos3250/4x12/5250/5420/5800).
@@ -136,13 +136,13 @@ examples:
         samsung,syscon-phandle = <&pmu_system_controller>;
 
         /* NTC thermistor is a hwmon device */
-        ncp15wb473 {
+        thermistor {
             compatible = "murata,ncp15wb473";
             pullup-uv = <1800000>;
             pullup-ohm = <47000>;
             pulldown-ohm = <0>;
             io-channels = <&adc 4>;
-          };
+        };
     };
 
   - |
@@ -150,7 +150,7 @@ examples:
 
     adc@126c0000 {
         compatible = "samsung,exynos3250-adc";
-        reg = <0x126C0000 0x100>;
+        reg = <0x126c0000 0x100>;
         interrupts = <0 137 0>;
         #io-channel-cells = <1>;
 
diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
index a390343d0c2a..cab0d425eaa4 100644
--- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/iio/adc/sigma-delta-modulator.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Device-Tree bindings for sigma delta modulator
+title: Sigma delta modulator
 
 maintainers:
-  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
index caa3ee0b4b8c..8181cf9a8e07 100644
--- a/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/sprd,sc2720-adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Spreadtrum SC27XX series PMICs ADC binding
+title: Spreadtrum SC27XX series PMICs ADC
 
 maintainers:
   - Baolin Wang <baolin.wang7@gmail.com>
@@ -20,6 +20,7 @@ properties:
       - sprd,sc2723-adc
       - sprd,sc2730-adc
       - sprd,sc2731-adc
+      - sprd,ump9620-adc
 
   reg:
     maxItems: 1
@@ -33,13 +34,39 @@ properties:
   hwlocks:
     maxItems: 1
 
-  nvmem-cells:
-    maxItems: 2
+  nvmem-cells: true
 
-  nvmem-cell-names:
-    items:
-      - const: big_scale_calib
-      - const: small_scale_calib
+  nvmem-cell-names: true
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - sprd,ump9620-adc
+    then:
+      properties:
+        nvmem-cells:
+          maxItems: 2
+        nvmem-cell-names:
+          items:
+            - const: big_scale_calib
+            - const: small_scale_calib
+
+    else:
+      properties:
+        nvmem-cells:
+          maxItems: 6
+        nvmem-cell-names:
+          items:
+            - const: big_scale_calib1
+            - const: big_scale_calib2
+            - const: small_scale_calib1
+            - const: small_scale_calib2
+            - const: vbat_det_cal1
+            - const: vbat_det_cal2
 
 required:
   - compatible
@@ -69,4 +96,25 @@ examples:
             nvmem-cell-names = "big_scale_calib", "small_scale_calib";
         };
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@504 {
+            compatible = "sprd,ump9620-adc";
+            reg = <0x504>;
+            interrupt-parent = <&ump9620_pmic>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+            #io-channel-cells = <1>;
+            hwlocks = <&hwlock 4>;
+            nvmem-cells = <&adc_bcal1>, <&adc_bcal2>,
+                          <&adc_scal1>, <&adc_scal2>,
+                          <&vbat_det_cal1>, <&vbat_det_cal2>;
+            nvmem-cell-names = "big_scale_calib1", "big_scale_calib2",
+                               "small_scale_calib1", "small_scale_calib2",
+                               "vbat_det_cal1", "vbat_det_cal2";
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
index a58334c3bb76..995cbf8cefc6 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 ADC bindings
+title: STMicroelectronics STM32 ADC
 
 description: |
   STM32 ADC is a successive approximation analog-to-digital converter.
@@ -19,7 +19,7 @@ description: |
   Each STM32 ADC block can have up to 3 ADC instances.
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 properties:
   compatible:
@@ -27,6 +27,7 @@ properties:
       - st,stm32f4-adc-core
       - st,stm32h7-adc-core
       - st,stm32mp1-adc-core
+      - st,stm32mp13-adc-core
 
   reg:
     maxItems: 1
@@ -37,6 +38,7 @@ properties:
         - stm32f4 and stm32h7 share a common ADC interrupt line.
         - stm32mp1 has two separate interrupt lines, one for each ADC within
           ADC block.
+        - stm32mp13 has an interrupt line per ADC block.
     minItems: 1
     maxItems: 2
 
@@ -78,7 +80,7 @@ properties:
     description:
       Phandle to system configuration controller. It can be used to control the
       analog circuitry on stm32mp1.
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: /schemas/types.yaml#/definitions/phandle-array
 
   interrupt-controller: true
 
@@ -138,7 +140,6 @@ allOf:
             - const: bus
             - const: adc
           minItems: 1
-          maxItems: 2
 
         interrupts:
           items:
@@ -170,7 +171,6 @@ allOf:
             - const: bus
             - const: adc
           minItems: 1
-          maxItems: 2
 
         interrupts:
           items:
@@ -182,6 +182,33 @@ allOf:
           maximum: 36000000
           default: 36000000
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp13-adc-core
+
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 2
+
+        clock-names:
+          items:
+            - const: bus
+            - const: adc
+          minItems: 1
+
+        interrupts:
+          items:
+            - description: ADC interrupt line
+
+        st,max-clk-rate-hz:
+          minimum: 150000
+          maximum: 75000000
+          default: 75000000
+
 additionalProperties: false
 
 required:
@@ -210,6 +237,7 @@ patternProperties:
           - st,stm32f4-adc
           - st,stm32h7-adc
           - st,stm32mp1-adc
+          - st,stm32mp13-adc
 
       reg:
         description: |
@@ -222,10 +250,16 @@ patternProperties:
       '#io-channel-cells':
         const: 1
 
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
       interrupts:
         description: |
           IRQ Line for the ADC instance. Valid values are:
-            - 0 for adc@0
+            - 0 for adc@0 (single adc for stm32mp13)
             - 1 for adc@100
             - 2 for adc@200 (stm32f4 only)
         maxItems: 1
@@ -246,16 +280,18 @@ patternProperties:
       assigned-resolution-bits:
         description: |
           Resolution (bits) to use for conversions:
-            - can be 6, 8, 10 or 12 on stm32f4
+            - can be 6, 8, 10 or 12 on stm32f4 and stm32mp13
             - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1
 
       st,adc-channels:
         description: |
           List of single-ended channels muxed for this ADC. It can have up to:
             - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4
+            - 19 channels, numbered from 0 to 18 (for in0..in18) on stm32mp13.
             - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and
               stm32mp1.
         $ref: /schemas/types.yaml#/definitions/uint32-array
+        deprecated: true
 
       st,adc-diff-channels:
         description: |
@@ -265,7 +301,9 @@ patternProperties:
           <vinp vinn>, <vinp vinn>,... vinp and vinn are numbered from 0 to 19.
 
           Note: At least one of "st,adc-channels" or "st,adc-diff-channels" is
-          required. Both properties can be used together. Some channels can be
+          required if no adc generic channel is defined. These legacy channel
+          properties are exclusive with adc generic channel bindings.
+          Both properties can be used together. Some channels can be
           used as single-ended and some other ones as differential (mixed). But
           channels can't be configured both as single-ended and differential.
         $ref: /schemas/types.yaml#/definitions/uint32-matrix
@@ -279,6 +317,7 @@ patternProperties:
                 "vinn" indicates negative input number
               minimum: 0
               maximum: 19
+        deprecated: true
 
       st,min-sample-time-nsecs:
         description:
@@ -289,6 +328,50 @@ patternProperties:
           list, to set sample time resp. for all channels, or independently for
           each channel.
         $ref: /schemas/types.yaml#/definitions/uint32-array
+        deprecated: true
+
+      nvmem-cells:
+        items:
+          - description: Phandle to the calibration vrefint data provided by otp
+
+      nvmem-cell-names:
+        items:
+          - const: vrefint
+
+    patternProperties:
+      "^channel@([0-9]|1[0-9])$":
+        type: object
+        $ref: adc.yaml
+        description: Represents the external channels which are connected to the ADC.
+
+        properties:
+          reg:
+            items:
+              minimum: 0
+              maximum: 19
+
+          label:
+            description: |
+              Unique name to identify which channel this is.
+              Reserved label names "vddcore", "vddcpu", "vddq_ddr", "vrefint" and "vbat"
+              are used to identify internal channels with matching names.
+
+          diff-channels:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            items:
+              minimum: 0
+              maximum: 19
+
+          st,min-sample-time-ns:
+            description: |
+              Minimum sampling time in nanoseconds. Depending on hardware (board)
+              e.g. high/low analog input source impedance, fine tune of ADC
+              sampling time may be recommended.
+
+        required:
+          - reg
+
+        additionalProperties: false
 
     allOf:
       - if:
@@ -367,13 +450,38 @@ patternProperties:
               items:
                 minimum: 40
 
-    additionalProperties: false
 
-    anyOf:
-      - required:
-          - st,adc-channels
-      - required:
-          - st,adc-diff-channels
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: st,stm32mp13-adc
+
+        then:
+          properties:
+            reg:
+              const: 0x0
+
+            interrupts:
+              const: 0
+
+            assigned-resolution-bits:
+              enum: [6, 8, 10, 12]
+              default: 12
+
+            st,adc-channels:
+              minItems: 1
+              maxItems: 19
+              items:
+                minimum: 0
+                maximum: 18
+
+            st,min-sample-time-nsecs:
+              minItems: 1
+              maxItems: 19
+              items:
+                minimum: 40
+    additionalProperties: false
 
     required:
       - compatible
@@ -451,4 +559,50 @@ examples:
         // other adc child node follow...
       };
 
+  - |
+    // Example 3: with stm32mp157c to setup ADC2 with:
+    // - internal channels 13, 14, 15.
+      #include <dt-bindings/interrupt-controller/arm-gic.h>
+      #include <dt-bindings/clock/stm32mp1-clks.h>
+      adc122: adc@48003000 {
+        compatible = "st,stm32mp1-adc-core";
+        reg = <0x48003000 0x400>;
+        interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&rcc ADC12>, <&rcc ADC12_K>;
+        clock-names = "bus", "adc";
+        booster-supply = <&booster>;
+        vdd-supply = <&vdd>;
+        vdda-supply = <&vdda>;
+        vref-supply = <&vref>;
+        st,syscfg = <&syscfg>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        adc@100 {
+          compatible = "st,stm32mp1-adc";
+          #io-channel-cells = <1>;
+          reg = <0x100>;
+          interrupts = <1>;
+          #address-cells = <1>;
+          #size-cells = <0>;
+          channel@13 {
+            reg = <13>;
+            label = "vrefint";
+            st,min-sample-time-ns = <9000>;
+          };
+          channel@14 {
+            reg = <14>;
+            label = "vddcore";
+            st,min-sample-time-ns = <9000>;
+          };
+          channel@15 {
+            reg = <15>;
+            label = "vbat";
+            st,min-sample-time-ns = <9000>;
+          };
+        };
+      };
+
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 733351dee252..1970503389aa 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: STMicroelectronics STM32 DFSDM ADC device driver
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
-  - Olivier Moysan <olivier.moysan@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
+  - Olivier Moysan <olivier.moysan@foss.st.com>
 
 description: |
   STM32 DFSDM ADC is a sigma delta analog-to-digital converter dedicated to
@@ -72,6 +72,7 @@ additionalProperties: false
 patternProperties:
   "^filter@[0-9]+$":
     type: object
+    unevaluatedProperties: false
     description: child node
 
     properties:
@@ -108,9 +109,7 @@ patternProperties:
           - [1-5]: order 1 to 5.
           For audio purpose it is recommended to use order 3 to 5.
         $ref: /schemas/types.yaml#/definitions/uint32
-        items:
-          minimum: 0
-          maximum: 5
+        maximum: 5
 
       "#io-channel-cells":
         const: 1
@@ -174,7 +173,7 @@ patternProperties:
               contains:
                 const: st,stm32-dfsdm-adc
 
-      - then:
+        then:
           properties:
             st,adc-channels:
               minItems: 1
@@ -206,7 +205,7 @@ patternProperties:
               contains:
                 const: st,stm32-dfsdm-dmic
 
-      - then:
+        then:
           properties:
             st,adc-channels:
               maxItems: 1
@@ -227,6 +226,7 @@ patternProperties:
           patternProperties:
             "^dfsdm-dai+$":
               type: object
+              additionalProperties: false
               description: child node
 
               properties:
@@ -254,7 +254,7 @@ allOf:
           contains:
             const: st,stm32h7-dfsdm
 
-  - then:
+    then:
       patternProperties:
         "^filter@[0-9]+$":
           properties:
@@ -269,7 +269,7 @@ allOf:
           contains:
             const: st,stm32mp1-dfsdm
 
-  - then:
+    then:
       patternProperties:
         "^filter@[0-9]+$":
           properties:
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
index 9049c699152f..474e35c49348 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
@@ -13,8 +13,7 @@ description:
   This ADC forms part of an ST microelectronics STMPE multifunction device .
   The ADC is shared with the STMPE touchscreen. As a result some ADC related
   settings are specified in the parent node.
-  The node name myst be stmpe_adc and should be a child node of the stmpe node
-  to which it belongs.
+  The node should be a child node of the stmpe node to which it belongs.
 
 properties:
   compatible:
@@ -36,10 +35,8 @@ additionalProperties: false
 
 examples:
   - |
-    stmpe {
-        stmpe_adc {
-            compatible = "st,stmpe-adc";
-            st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
-        };
+    adc {
+        compatible = "st,stmpe-adc";
+        st,norequest-mask = <0x0f>; /* dont use ADC CH3-0 */
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc081c.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc081c.yaml
new file mode 100644
index 000000000000..caaad777580c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc081c.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc081c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Single-channel I2C ADCs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+  - Lars-Peter Clausen <lars@metafoo.de>
+
+description: |
+  Single-channel ADC supporting 8, 10, or 12-bit samples and high/low alerts.
+
+properties:
+  compatible:
+    enum:
+      - ti,adc081c
+      - ti,adc101c
+      - ti,adc121c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Regulator for the combined power supply and voltage reference
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@52 {
+            compatible = "ti,adc081c";
+            reg = <0x52>;
+            vref-supply = <&reg_2p5v>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
index f5a923cc847f..686721176a58 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
@@ -24,8 +24,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: External reference, needed to establish input scaling
 
@@ -37,7 +35,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
index 1a113b30a414..726d2cbfa368 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc084s021.yaml
@@ -19,8 +19,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: External reference, needed to establish input scaling
 
@@ -37,7 +35,10 @@ required:
   - spi-cpol
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
index 54955f03df93..9b072b057f16 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Texas Instruments ADC108S102 and ADC128S102
 
 maintainers:
-  - Bogdan Pricop <bogdan.pricop@emutex.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description: |
   Family of 8 channel, 10/12 bit, SPI, single ended ADCs.
@@ -19,7 +19,6 @@ properties:
 
   reg: true
   vref-supply: true
-  spi-max-frequency: true
   "#io-channel-cells":
     const: 1
 
@@ -28,7 +27,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
index ec3b2edf1fb7..076088a328c3 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc12138.yaml
@@ -31,8 +31,6 @@ properties:
     maxItems: 1
     description: Conversion clock input.
 
-  spi-max-frequency: true
-
   vref-p-supply:
     description: The regulator supply for positive analog voltage reference
 
@@ -62,7 +60,10 @@ required:
   - clocks
   - vref-p-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
index d54a0183f024..775eee972b12 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
@@ -27,8 +27,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply: true
 
   "#io-channel-cells":
@@ -39,7 +37,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
index 3f4f334d6f73..afe782522904 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
@@ -21,8 +21,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdda-supply: true
 
   "#io-channel-cells":
@@ -32,7 +30,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
index 2c2d01bbc296..2127d639a768 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1015.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/ti,ads1015.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI ADS1015 4 channel I2C analog to digital converter
+title: TI ADS1015/ADS1115 4 channel I2C analog to digital converter
 
 maintainers:
   - Daniel Baluta <daniel.baluta@nxp.com>
@@ -15,7 +15,10 @@ description: |
 
 properties:
   compatible:
-    const: ti,ads1015
+    enum:
+      - ti,ads1015
+      - ti,ads1115
+      - ti,tla2024
 
   reg:
     maxItems: 1
@@ -40,6 +43,7 @@ additionalProperties: false
 patternProperties:
   "^channel@[0-7]+$":
     type: object
+    additionalProperties: false
     description:
       Child nodes needed for each channel that the platform uses.
 
@@ -100,12 +104,12 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
             channel@0 {
-              reg = <0>;
+                reg = <0>;
             };
             channel@4 {
-              reg = <4>;
-              ti,gain = <3>;
-              ti,datarate = <5>;
+                reg = <4>;
+                ti,gain = <3>;
+                ti,datarate = <5>;
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml
new file mode 100644
index 000000000000..970ccab15e1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1100.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads1100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI ADS1100/ADS1000 single channel I2C analog to digital converter
+
+maintainers:
+  - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: |
+  Datasheet at: https://www.ti.com/lit/gpn/ads1100
+
+properties:
+  compatible:
+    enum:
+      - ti,ads1100
+      - ti,ads1000
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+  "#io-channel-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@49 {
+            compatible = "ti,ads1100";
+            reg = <0x49>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
index 9f5e96439c01..56a3f1766aab 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads124s08.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Texas Instruments' ads124s08 and ads124s06 ADC chip
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 properties:
   compatible:
@@ -18,8 +18,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   spi-cpha: true
 
   reset-gpios:
@@ -32,7 +30,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
index e0670e3fbb72..890f125d422c 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs
 
 maintainers:
-  - Tomislav Denis <tomislav.denis@avl.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description: |
   The ADS131E0x are a family of multichannel, simultaneous sampling,
@@ -28,8 +28,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   spi-cpha: true
 
   clocks:
@@ -79,7 +77,7 @@ required:
 
 patternProperties:
   "^channel@([0-7])$":
-    $ref: "adc.yaml"
+    $ref: adc.yaml
     type: object
     description: |
       Represents the external channels which are connected to the ADC.
@@ -120,7 +118,10 @@ patternProperties:
 
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
new file mode 100644
index 000000000000..0d8d06afed8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads7924.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI ADS7924 4 channels 12 bits I2C analog to digital converter
+
+maintainers:
+  - Hugo Villeneuve <hvilleneuve@dimonoff.com>
+
+description: |
+  Texas Instruments ADS7924 4 channels 12 bits I2C analog to digital converter
+
+  Specifications:
+    https://www.ti.com/lit/gpn/ads7924
+
+properties:
+  compatible:
+    const: ti,ads7924
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage (AVDD)
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+patternProperties:
+  "^channel@[0-3]+$":
+    $ref: adc.yaml
+
+    description: |
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 4 channels numbered from 0 to 3.
+        items:
+          - minimum: 0
+            maximum: 3
+
+      label: true
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@48 {
+            compatible = "ti,ads7924";
+            reg = <0x48>;
+            vref-supply = <&ads7924_reg>;
+            reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                reg = <0>;
+                label = "CH0";
+            };
+            channel@1 {
+                reg = <1>;
+                label = "CH1";
+            };
+            channel@2 {
+                reg = <2>;
+                label = "CH2";
+            };
+            channel@3 {
+                reg = <3>;
+                label = "CH3";
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
index b8c398187d5c..f75b2c702986 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
@@ -19,8 +19,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: Supply the 2.5V or 5V reference voltage
 
@@ -32,7 +30,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
index a0af4b24877f..f26fdbc15f84 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads8688.yaml
@@ -25,13 +25,14 @@ properties:
     description: Optional external reference.  If not supplied, assume
       REFSEL input tied low to enable the internal reference.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
new file mode 100644
index 000000000000..b32be24a9f98
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,am3359-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 ADC
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - ti,am3359-adc
+          - ti,am4372-adc
+      - items:
+          - enum:
+              - ti,am654-adc
+          - const: ti,am3359-adc
+
+  '#io-channel-cells':
+    const: 1
+
+  ti,adc-channels:
+    description: List of analog inputs available for ADC. AIN0 = 0, AIN1 = 1 and
+      so on until AIN7 = 7.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  ti,chan-step-opendelay:
+    description: List of open delays for each channel of ADC in the order of
+      ti,adc-channels. The value corresponds to the number of ADC clock cycles
+      to wait after applying the step configuration registers and before sending
+      the start of ADC conversion. Maximum value is 0x3FFFF.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  ti,chan-step-sampledelay:
+    description: List of sample delays for each channel of ADC in the order of
+      ti,adc-channels. The value corresponds to the number of ADC clock cycles
+      to sample (to hold start of conversion high). Maximum value is 0xFF.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+  ti,chan-step-avg:
+    description: Number of averages to be performed for each channel of ADC. If
+      average is 16 (this is also the maximum) then input is sampled 16 times
+      and averaged to get more accurate value. This increases the time taken by
+      ADC to generate a sample. Maximum value is 16.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - '#io-channel-cells'
+  - ti,adc-channels
+
+additionalProperties: false
+
+examples:
+  - |
+    adc {
+        compatible = "ti,am3359-adc";
+        #io-channel-cells = <1>;
+        ti,adc-channels = <4 5 6 7>;
+        ti,chan-step-opendelay = <0x098 0x3ffff 0x098 0x0>;
+        ti,chan-step-sampledelay = <0xff 0x0 0xf 0x0>;
+        ti,chan-step-avg = <16 2 4 8>;
+    };
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml b/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml
new file mode 100644
index 000000000000..5fb65bf7749d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,lmp92064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LMP92064 Precision Current and Voltage Sensor.
+
+maintainers:
+  - Leonard Göhrs <l.goehrs@pengutronix.de>
+
+description: |
+  The LMP92064 is a two channel ADC intended for combined voltage and current
+  measurements.
+
+  The device contains two ADCs to allow simultaneous sampling of voltage and
+  current and thus of instantaneous power consumption.
+
+properties:
+  compatible:
+    enum:
+      - ti,lmp92064
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the main part of the chip
+
+  vdig-supply:
+    description: |
+      Regulator that provides power to the digital I/O part of the chip
+
+  shunt-resistor-micro-ohms:
+    description: |
+      Value of the shunt resistor (in µΩ) connected between INCP and INCN,
+      across which current is measured. Used to provide correct scaling of the
+      raw ADC measurement.
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - shunt-resistor-micro-ohms
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,lmp92064";
+            reg = <0>;
+            vdd-supply = <&vdd>;
+            vdig-supply = <&vdd>;
+            spi-max-frequency = <20000000>;
+            shunt-resistor-micro-ohms = <15000>;
+            reset-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
index 7b895784e008..720c16a108d4 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/ti,palmas-gpadc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Palmas general purpose ADC IP block devicetree bindings
+title: Palmas general purpose ADC IP block
 
 maintainers:
   - Tony Lindgren <tony@atomide.com>
@@ -74,9 +74,9 @@ examples:
         compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
         adc {
             compatible = "ti,palmas-gpadc";
-            interrupts = <18 0
-                          16 0
-                          17 0>;
+            interrupts = <18 0>,
+                         <16 0>,
+                         <17 0>;
             #io-channel-cells = <1>;
             ti,channel0-current-microamp = <5>;
             ti,channel3-current-microamp = <10>;
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
index 6c2539b3d707..314d1d99bf73 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
@@ -21,8 +21,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply: true
 
   "#io-channel-cells":
@@ -33,7 +31,10 @@ required:
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
index 601d69971d84..866a05c9db36 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
@@ -23,7 +23,8 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
+  vref-supply:
+    description: Optional supply of the reference voltage
 
   "#io-channel-cells":
     const: 1
@@ -40,7 +41,7 @@ required:
 
 patternProperties:
   "^channel@[0-7]$":
-    $ref: "adc.yaml"
+    $ref: adc.yaml
     type: object
 
     properties:
@@ -59,7 +60,10 @@ patternProperties:
 
     additionalProperties: false
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -79,36 +83,36 @@ examples:
             #size-cells = <0>;
 
             channel@0 {
-              reg = <0>;
+                reg = <0>;
             };
             channel@1 {
-              reg = <1>;
-              settling-time-us = <700>;
-              oversampling-ratio = <5>;
+                reg = <1>;
+                settling-time-us = <700>;
+                oversampling-ratio = <5>;
             };
             channel@2 {
-              reg = <2>;
+                reg = <2>;
             };
             channel@3 {
-              reg = <3>;
-              settling-time-us = <700>;
-              oversampling-ratio = <5>;
+                reg = <3>;
+                settling-time-us = <700>;
+                oversampling-ratio = <5>;
             };
             channel@4 {
-              reg = <4>;
-              settling-time-us = <700>;
-              oversampling-ratio = <5>;
+                reg = <4>;
+                settling-time-us = <700>;
+                oversampling-ratio = <5>;
             };
             channel@5 {
-              reg = <5>;
-              settling-time-us = <700>;
-              oversampling-ratio = <5>;
+                reg = <5>;
+                settling-time-us = <700>;
+                oversampling-ratio = <5>;
             };
             channel@6 {
-              reg = <6>;
+                reg = <6>;
             };
             channel@7 {
-              reg = <7>;
+                reg = <7>;
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
index e759a5da708d..d40689f233f2 100644
--- a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/adc/x-powers,axp209-adc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: X-Powers AXP ADC bindings
+title: X-Powers AXP ADC
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -27,6 +27,7 @@ description: |
    8 | batt_v
    9 | batt_chrg_i
   10 | batt_dischrg_i
+  11 | ts_v
 
   AXP22x
   ------
@@ -34,6 +35,7 @@ description: |
    1 | batt_v
    2 | batt_chrg_i
    3 | batt_dischrg_i
+   4 | ts_v
 
   AXP813
   ------
@@ -42,6 +44,7 @@ description: |
    2 | batt_v
    3 | batt_chrg_i
    4 | batt_dischrg_i
+   5 | ts_v
 
 
 properties:
diff --git a/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
new file mode 100644
index 000000000000..be93c109d6ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/xlnx,zynqmp-ams.yaml
@@ -0,0 +1,236 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/xlnx,zynqmp-ams.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Ultrascale AMS controller
+
+maintainers:
+  - Anand Ashok Dumbre <anand.ashok.dumbre@xilinx.com>
+
+description: |
+  The AMS (Analog Monitoring System) includes an ADC as well as on-chip sensors
+  that can be used to sample external voltages and monitor on-die operating
+  conditions, such as temperature and supply voltage levels.
+  The AMS has two SYSMON blocks which are PL (Programmable Logic) SYSMON and
+  PS (Processing System) SYSMON.
+  All designs should have AMS registers, but PS and PL are optional. The
+  AMS controller can work with only PS, only PL and both PS and PL
+  configurations. Please specify registers according to your design. Devicetree
+  should always have AMS module property. Providing PS & PL module is optional.
+
+  AMS Channel Details
+  ```````````````````
+  Sysmon Block  |Channel|                       Details                                 |Measurement
+                |Number |                                                               |Type
+  ---------------------------------------------------------------------------------------------------------
+  AMS CTRL      |0      |System PLLs voltage measurement, VCC_PSPLL.                    |Voltage
+                |1      |Battery voltage measurement, VCC_PSBATT.                       |Voltage
+                |2      |PL Internal voltage measurement, VCCINT.                       |Voltage
+                |3      |Block RAM voltage measurement, VCCBRAM.                        |Voltage
+                |4      |PL Aux voltage measurement, VCCAUX.                            |Voltage
+                |5      |Voltage measurement for six DDR I/O PLLs, VCC_PSDDR_PLL.       |Voltage
+                |6      |VCC_PSINTFP_DDR voltage measurement.                           |Voltage
+  ---------------------------------------------------------------------------------------------------------
+  PS Sysmon     |7      |LPD temperature measurement.                                   |Temperature
+                |8      |FPD temperature measurement (REMOTE).                          |Temperature
+                |9      |VCC PS LPD voltage measurement (supply1).                      |Voltage
+                |10     |VCC PS FPD voltage measurement (supply2).                      |Voltage
+                |11     |PS Aux voltage reference (supply3).                            |Voltage
+                |12     |DDR I/O VCC voltage measurement.                               |Voltage
+                |13     |PS IO Bank 503 voltage measurement (supply5).                  |Voltage
+                |14     |PS IO Bank 500 voltage measurement (supply6).                  |Voltage
+                |15     |VCCO_PSIO1 voltage measurement.                                |Voltage
+                |16     |VCCO_PSIO2 voltage measurement.                                |Voltage
+                |17     |VCC_PS_GTR voltage measurement (VPS_MGTRAVCC).                 |Voltage
+                |18     |VTT_PS_GTR voltage measurement (VPS_MGTRAVTT).                 |Voltage
+                |19     |VCC_PSADC voltage measurement.                                 |Voltage
+  ---------------------------------------------------------------------------------------------------------
+  PL Sysmon     |20     |PL temperature measurement.                                    |Temperature
+                |21     |PL Internal voltage measurement, VCCINT.                       |Voltage
+                |22     |PL Auxiliary voltage measurement, VCCAUX.                      |Voltage
+                |23     |ADC Reference P+ voltage measurement.                          |Voltage
+                |24     |ADC Reference N- voltage measurement.                          |Voltage
+                |25     |PL Block RAM voltage measurement, VCCBRAM.                     |Voltage
+                |26     |LPD Internal voltage measurement, VCC_PSINTLP (supply4).       |Voltage
+                |27     |FPD Internal voltage measurement, VCC_PSINTFP (supply5).       |Voltage
+                |28     |PS Auxiliary voltage measurement (supply6).                    |Voltage
+                |29     |PL VCCADC voltage measurement (vccams).                        |Voltage
+                |30     |Differential analog input signal voltage measurment.           |Voltage
+                |31     |VUser0 voltage measurement (supply7).                          |Voltage
+                |32     |VUser1 voltage measurement (supply8).                          |Voltage
+                |33     |VUser2 voltage measurement (supply9).                          |Voltage
+                |34     |VUser3 voltage measurement (supply10).                         |Voltage
+                |35     |Auxiliary ch 0 voltage measurement (VAux0).                    |Voltage
+                |36     |Auxiliary ch 1 voltage measurement (VAux1).                    |Voltage
+                |37     |Auxiliary ch 2 voltage measurement (VAux2).                    |Voltage
+                |38     |Auxiliary ch 3 voltage measurement (VAux3).                    |Voltage
+                |39     |Auxiliary ch 4 voltage measurement (VAux4).                    |Voltage
+                |40     |Auxiliary ch 5 voltage measurement (VAux5).                    |Voltage
+                |41     |Auxiliary ch 6 voltage measurement (VAux6).                    |Voltage
+                |42     |Auxiliary ch 7 voltage measurement (VAux7).                    |Voltage
+                |43     |Auxiliary ch 8 voltage measurement (VAux8).                    |Voltage
+                |44     |Auxiliary ch 9 voltage measurement (VAux9).                    |Voltage
+                |45     |Auxiliary ch 10 voltage measurement (VAux10).                  |Voltage
+                |46     |Auxiliary ch 11 voltage measurement (VAux11).                  |Voltage
+                |47     |Auxiliary ch 12 voltage measurement (VAux12).                  |Voltage
+                |48     |Auxiliary ch 13 voltage measurement (VAux13).                  |Voltage
+                |49     |Auxiliary ch 14 voltage measurement (VAux14).                  |Voltage
+                |50     |Auxiliary ch 15 voltage measurement (VAux15).                  |Voltage
+  --------------------------------------------------------------------------------------------------------
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynqmp-ams
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    description: AMS Controller register space
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: AMS reference clock
+
+  ranges:
+    description:
+      Maps the child address space for PS and/or PL.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#io-channel-cells':
+    const: 1
+
+  ams-ps@0:
+    type: object
+    description: |
+      PS (Processing System) SYSMON is memory mapped to PS. This block has
+      built-in alarm generation logic that is used to interrupt the processor
+      based on condition set.
+
+    properties:
+      compatible:
+        enum:
+          - xlnx,zynqmp-ams-ps
+
+      reg:
+        description: Register Space for PS-SYSMON
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+  ams-pl@400:
+    type: object
+    additionalProperties: false
+    description:
+      PL-SYSMON is capable of monitoring off chip voltage and temperature.
+      PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring
+      from external master. Out of this interface currently only DRP is
+      supported. This block has alarm generation logic that is used to
+      interrupt the processor based on condition set.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - xlnx,zynqmp-ams-pl
+
+      reg:
+        description: Register Space for PL-SYSMON.
+        maxItems: 1
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^channel@([2-4][0-9]|50)$":
+        type: object
+        description:
+          Describes the external channels connected.
+
+        properties:
+          reg:
+            description:
+              Pair of pins the channel is connected to. This value is
+              same as Channel Number for a particular channel.
+            minimum: 20
+            maximum: 50
+
+          xlnx,bipolar:
+            $ref: /schemas/types.yaml#/definitions/flag
+            type: boolean
+            description:
+              If the set channel is used in bipolar mode.
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        xilinx_ams: ams@ffa50000 {
+            compatible = "xlnx,zynqmp-ams";
+            interrupt-parent = <&gic>;
+            interrupts = <0 56 4>;
+            reg = <0x0 0xffa50000 0x0 0x800>;
+            clocks = <&zynqmp_clk AMS_REF>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            #io-channel-cells = <1>;
+            ranges = <0 0 0xffa50800 0x800>;
+
+            ams_ps: ams-ps@0 {
+                compatible = "xlnx,zynqmp-ams-ps";
+                reg = <0 0x400>;
+            };
+
+            ams_pl: ams-pl@400 {
+                compatible = "xlnx,zynqmp-ams-pl";
+                reg = <0x400 0x400>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                channel@30 {
+                    reg = <30>;
+                    xlnx,bipolar;
+                };
+                channel@31 {
+                    reg = <31>;
+                };
+                channel@38 {
+                    reg = <38>;
+                    xlnx,bipolar;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml
new file mode 100644
index 000000000000..72d2e910f206
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74115.yaml
@@ -0,0 +1,373 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/addac/adi,ad74115.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD74115H device
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The AD74115H is a single-channel software configurable input/output
+  device for industrial control applications. It contains functionality for
+  analog output, analog input, digital output, digital input, resistance
+  temperature detector, and thermocouple measurements integrated into a single
+  chip solution with an SPI interface. The device features a 16-bit ADC and a
+  14-bit DAC.
+
+    https://www.analog.com/en/products/ad74115h.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad74115h
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 24000000
+
+  spi-cpol: true
+
+  reset-gpios: true
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      enum:
+        - adc_rdy
+        - alert
+
+  avdd-supply: true
+  avcc-supply: true
+  dvcc-supply: true
+  dovdd-supply: true
+  refin-supply: true
+
+  adi,ch-func:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Channel function.
+      0 - High impedance
+      1 - Voltage output
+      2 - Current output
+      3 - Voltage input
+      4 - Current input, externally-powered
+      5 - Current input, loop-powered
+      6 - Resistance input
+      7 - RTD measure
+      8 - Digital input logic
+      9 - Digital input, loop-powered
+      10 - Current output with HART
+      11 - Current input, externally-powered, with HART
+      12 - Current input, loop-powered, with HART
+    minimum: 0
+    maximum: 12
+    default: 0
+
+  adi,conv2-mux:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Input node for ADC conversion 2.
+      0 - SENSE_EXT1 to AGND_SENSE
+      1 - SENSE_EXT2 to AGND_SENSE
+      2 - SENSE_EXT2 to SENSE_EXT1
+      3 - AGND to AGND
+    minimum: 0
+    maximum: 3
+    default: 0
+
+  adi,conv2-range-microvolt:
+    description: Conversion range for ADC conversion 2.
+    oneOf:
+      - items:
+          - enum: [-2500000, 0]
+          - const: 2500000
+      - items:
+          - enum: [-12000000, 0]
+          - const: 12000000
+      - items:
+          - const: -2500000
+          - const: 0
+      - items:
+          - const: -104000
+          - const: 104000
+      - items:
+          - const: 0
+          - const: 625000
+
+  adi,sense-agnd-buffer-low-power:
+    type: boolean
+    description:
+      Whether to enable low-power buffered mode for the AGND sense pin.
+
+  adi,lf-buffer-low-power:
+    type: boolean
+    description:
+      Whether to enable low-power buffered mode for the low-side filtered
+      sense pin.
+
+  adi,hf-buffer-low-power:
+    type: boolean
+    description:
+      Whether to enable low-power buffered mode for the high-side filtered
+      sense pin.
+
+  adi,ext2-buffer-low-power:
+    type: boolean
+    description: Whether to enable low-power buffered mode for the EXT2 pin.
+
+  adi,ext1-buffer-low-power:
+    type: boolean
+    description: Whether to enable low-power buffered mode for the EXT1 pin.
+
+  adi,comparator-invert:
+    type: boolean
+    description: Whether to invert the comparator output.
+
+  adi,digital-input-sink-range-high:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      When not present, the digital input range is from 0 to 3700uA in steps
+      of 120uA, with a ~2k series resistance.
+      When present, the digital input range is from 0 to 7400uA in steps
+      of 240uA, with a ~1k series resistance.
+
+  adi,digital-input-sink-microamp:
+    description: Sink current in digital input mode.
+    minimum: 0
+    maximum: 3700
+    default: 0
+
+  adi,digital-input-debounce-mode-counter-reset:
+    type: boolean
+    description: |
+      When not present, a counter increments when the signal is asserted
+      and decrements when the signal is de-asserted.
+      When present, a counter increments while the signal is asserted and
+      resets when the signal de-asserts
+
+  adi,digital-input-unbuffered:
+    type: boolean
+    description: Whether to buffer digital input signals.
+
+  adi,digital-input-short-circuit-detection:
+    type: boolean
+    description: Whether to detect digital input short circuits.
+
+  adi,digital-input-open-circuit-detection:
+    type: boolean
+    description: Whether to detect digital input open circuits.
+
+  adi,digital-input-threshold-mode-fixed:
+    type: boolean
+    description: |
+      When not present, the digital input threshold range is -0.96 * AVDD
+      to AVDD.
+      When present, the threshold range is fixed from -19V to 30V.
+
+  adi,dac-bipolar:
+    type: boolean
+    description: |
+      When not present, the DAC operates in the 0V to 12V range.
+      When present, the DAC operates in the -12V to 12V range.
+
+  adi,charge-pump:
+    type: boolean
+    description: Whether to enable the internal charge pump.
+
+  adi,dac-hart-slew:
+    type: boolean
+    description: Whether to use a HART-compatible slew rate.
+
+  adi,dac-current-limit-low:
+    type: boolean
+    description: |
+      When not present, the DAC short-circuit current limit is 32mA in
+      either source or sink for VOUT and 4mA sink for IOUT.
+      When present, the limit is 16mA in either source or sink for VOUT,
+      1mA sink for IOUT.
+
+  adi,4-wire-rtd:
+    type: boolean
+    description: |
+      When not present, the ADC should be used for measuring 3-wire RTDs.
+      When present, the ADC should be used for measuring 4-wire RTDs.
+
+  adi,3-wire-rtd-excitation-swap:
+    type: boolean
+    description: Whether to swap the excitation for 3-wire RTD.
+
+  adi,rtd-excitation-current-microamp:
+    description: Excitation current to apply to RTD.
+    enum: [250, 500, 750, 1000]
+    default: 250
+
+  adi,ext1-burnout:
+    type: boolean
+    description: Whether to enable burnout current for EXT1.
+
+  adi,ext1-burnout-current-nanoamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Burnout current in nanoamps to be applied to EXT1.
+    enum: [0, 50, 500, 1000, 10000]
+    default: 0
+
+  adi,ext1-burnout-current-polarity-sourcing:
+    type: boolean
+    description: |
+      When not present, the burnout current polarity for EXT1 is sinking.
+      When present, the burnout current polarity for EXT1 is sourcing.
+
+  adi,ext2-burnout:
+    type: boolean
+    description: Whether to enable burnout current for EXT2.
+
+  adi,ext2-burnout-current-nanoamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Burnout current in nanoamps to be applied to EXT2.
+    enum: [0, 50, 500, 1000, 10000]
+    default: 0
+
+  adi,ext2-burnout-current-polarity-sourcing:
+    type: boolean
+    description: |
+      When not present, the burnout current polarity for EXT2 is sinking.
+      When present, the burnout current polarity for EXT2 is sourcing.
+
+  adi,viout-burnout:
+    type: boolean
+    description: Whether to enable burnout current for VIOUT.
+
+  adi,viout-burnout-current-nanoamp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Burnout current in nanoamps to be applied to VIOUT.
+    enum: [0, 1000, 10000]
+    default: 0
+
+  adi,viout-burnout-current-polarity-sourcing:
+    type: boolean
+    description: |
+      When not present, the burnout current polarity for VIOUT is sinking.
+      When present, the burnout current polarity for VIOUT is sourcing.
+
+  adi,gpio0-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - Comparator output
+      3 - Control HART CD
+      4 - Monitor HART CD
+      5 - Monitor HART EOM status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+  adi,gpio1-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - Drive external digital output FET
+      3 - Control HART RXD
+      4 - Monitor HART RXD
+      5 - Monitor HART SOM status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+  adi,gpio2-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - Drive internal digital output FET
+      3 - Control HART TXD
+      4 - Monitor HART TXD
+      5 - Monitor HART TX complete status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+  adi,gpio3-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      GPIO functions.
+      0 - Disabled
+      1 - Logic I/O
+      2 - High impedance
+      3 - Control HART RTS
+      4 - Monitor HART RTS
+      5 - Monitor HART CD complete status
+    minimum: 0
+    maximum: 5
+    default: 0
+
+required:
+  - compatible
+  - reg
+  - spi-cpol
+  - avdd-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      required:
+        - adi,digital-input-sink-range-high
+    then:
+      properties:
+        adi,digital-input-sink-microamp:
+          maximum: 7400
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      addac@0 {
+        compatible = "adi,ad74115h";
+        reg = <0>;
+
+        spi-max-frequency = <12000000>;
+        spi-cpol;
+
+        reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+
+        interrupt-parent = <&gpio>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+        interrupt-names = "adc_rdy";
+
+        avdd-supply = <&ad74115_avdd>;
+
+        adi,ch-func = <1>;
+        adi,conv2-mux = <2>;
+        adi,conv2-range-microvolt = <(-12000000) 12000000>;
+
+        adi,gpio0-mode = <1>;
+        adi,gpio1-mode = <1>;
+        adi,gpio2-mode = <1>;
+        adi,gpio3-mode = <1>;
+
+        adi,dac-bipolar;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
new file mode 100644
index 000000000000..590ea7936ad7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/addac/adi,ad74413r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD74412R/AD74413R device
+
+maintainers:
+  - Cosmin Tanislav <cosmin.tanislav@analog.com>
+
+description: |
+  The AD74412R and AD74413R are quad-channel software configurable input/output
+  solutions for building and process control applications. They contain
+  functionality for analog output, analog input, digital input, resistance
+  temperature detector, and thermocouple measurements integrated
+  into a single chip solution with an SPI interface.
+  The devices feature a 16-bit ADC and four configurable 13-bit DACs to provide
+  four configurable input/output channels and a suite of diagnostic functions.
+  The AD74413R differentiates itself from the AD74412R by being HART-compatible.
+    https://www.analog.com/en/products/ad74412r.html
+    https://www.analog.com/en/products/ad74413r.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad74412r
+      - adi,ad74413r
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  spi-cpol: true
+
+  interrupts:
+    maxItems: 1
+
+  refin-supply: true
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt (sense) resistor value in micro-Ohms.
+    default: 100000000
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - spi-cpol
+  - refin-supply
+
+patternProperties:
+  "^channel@[0-3]$":
+    type: object
+    additionalProperties: false
+    description: Represents the external channels which are connected to the device.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 4 channels numbered from 0 to 3.
+        minimum: 0
+        maximum: 3
+
+      adi,ch-func:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: |
+          Channel function.
+          HART functions are not supported on AD74412R.
+          0 - CH_FUNC_HIGH_IMPEDANCE
+          1 - CH_FUNC_VOLTAGE_OUTPUT
+          2 - CH_FUNC_CURRENT_OUTPUT
+          3 - CH_FUNC_VOLTAGE_INPUT
+          4 - CH_FUNC_CURRENT_INPUT_EXT_POWER
+          5 - CH_FUNC_CURRENT_INPUT_LOOP_POWER
+          6 - CH_FUNC_RESISTANCE_INPUT
+          7 - CH_FUNC_DIGITAL_INPUT_LOGIC
+          8 - CH_FUNC_DIGITAL_INPUT_LOOP_POWER
+          9 - CH_FUNC_CURRENT_INPUT_EXT_POWER_HART
+          10 - CH_FUNC_CURRENT_INPUT_LOOP_POWER_HART
+        minimum: 0
+        maximum: 10
+        default: 0
+
+      adi,gpo-comparator:
+        type: boolean
+        description: |
+          Whether to configure GPO as a comparator or not.
+          When not configured as a comparator, the GPO will be treated as an
+          output-only GPIO.
+
+      drive-strength-microamp:
+        description: |
+          For channels configured as digital input, this configures the sink
+          current.
+        minimum: 0
+        maximum: 1800
+        default: 0
+        multipleOf: 120
+
+    required:
+      - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/iio/addac/adi,ad74413r.h>
+
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      addac@0 {
+        compatible = "adi,ad74413r";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        spi-cpol;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        interrupt-parent = <&gpio>;
+        interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+        refin-supply = <&ad74413r_refin>;
+        reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+
+        channel@0 {
+          reg = <0>;
+
+          adi,ch-func = <CH_FUNC_VOLTAGE_OUTPUT>;
+        };
+
+        channel@1 {
+          reg = <1>;
+
+          adi,ch-func = <CH_FUNC_CURRENT_OUTPUT>;
+        };
+
+        channel@2 {
+          reg = <2>;
+
+          adi,ch-func = <CH_FUNC_DIGITAL_INPUT_LOGIC>;
+          adi,gpo-comparator;
+        };
+
+        channel@3 {
+          reg = <3>;
+
+          adi,ch-func = <CH_FUNC_CURRENT_INPUT_EXT_POWER>;
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml b/Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml
new file mode 100644
index 000000000000..336ce96371db
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/temperature-sense-rtd.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/temperature-sense-rtd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Sense RTD
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  RTDs (Resistance Temperature Detectors) are a kind of temperature sensors
+  used to get a linear voltage to temperature reading within a give range
+  (usually 0 to 100 degrees Celsius).
+
+  When an io-channel measures the output voltage across an RTD such as a
+  PT1000, the interesting measurement is almost always the corresponding
+  temperature, not the voltage output. This binding describes such a circuit.
+
+  The general transfer function here is (using SI units)
+
+    V = R(T) * iexc
+    R(T) = r0 * (1 + alpha * T)
+    T = 1 / (alpha * r0 * iexc) * (V - r0 * iexc)
+
+  The following circuit matches what's in the examples section.
+
+           5V0
+          -----
+            |
+        +---+----+
+        |  R 5k  |
+        +---+----+
+            |
+            V 1mA
+            |
+            +---- Vout
+            |
+        +---+----+
+        | PT1000 |
+        +---+----+
+            |
+          -----
+           GND
+
+properties:
+  compatible:
+    const: temperature-sense-rtd
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  '#io-channel-cells':
+    const: 0
+
+  excitation-current-microamp:
+    description: The current fed through the RTD sensor.
+
+  alpha-ppm-per-celsius:
+    description: |
+      alpha can also be expressed in micro-ohms per ohm Celsius. It's a linear
+      approximation of the resistance versus temperature relationship
+      between 0 and 100 degrees Celsius.
+
+      alpha = (R_100 - R_0) / (100 * R_0)
+
+      Where, R_100 is the resistance of the sensor at 100 degrees Celsius, and
+      R_0 (or r-naught-ohms) is the resistance of the sensor at 0 degrees
+      Celsius.
+
+      Pure platinum has an alpha of 3925. Industry standards such as IEC60751
+      and ASTM E-1137 specify an alpha of 3850.
+
+  r-naught-ohms:
+    description: |
+      Resistance of the sensor at 0 degrees Celsius.
+      Common values are 100 for PT100, 500 for PT500, and 1000 for PT1000
+
+additionalProperties: false
+required:
+  - compatible
+  - io-channels
+  - excitation-current-microamp
+  - alpha-ppm-per-celsius
+  - r-naught-ohms
+
+examples:
+  - |
+    pt1000_1: temperature-sensor0 {
+        compatible = "temperature-sense-rtd";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc1 0>;
+
+        excitation-current-microamp = <1000>; /* i = U/R = 5 / 5000 */
+        alpha-ppm-per-celsius = <3908>;
+        r-naught-ohms = <1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml b/Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml
new file mode 100644
index 000000000000..cfbf5350db27
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/afe/temperature-transducer.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/afe/temperature-transducer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Transducer
+
+maintainers:
+  - Liam Beguin <liambeguin@gmail.com>
+
+description: |
+  A temperature transducer is a device that converts a thermal quantity
+  into any other physical quantity. This binding applies to temperature to
+  voltage (like the LTC2997), and temperature to current (like the AD590)
+  linear transducers.
+  In both cases these are assumed to be connected to a voltage ADC.
+
+  When an io-channel measures the output voltage of a temperature analog front
+  end such as a temperature transducer, the interesting measurement is almost
+  always the corresponding temperature, not the voltage output. This binding
+  describes such a circuit.
+
+  The general transfer function here is (using SI units)
+    V(T) = Rsense * Isense(T)
+    T = (Isense(T) / alpha) + offset
+    T = 1 / (Rsense * alpha) * (V + offset * Rsense * alpha)
+
+  When using a temperature to voltage transducer, Rsense is set to 1.
+
+  The following circuits show a temperature to current and a temperature to
+  voltage transducer that can be used with this binding.
+
+           VCC
+          -----
+            |
+        +---+---+
+        | AD590 |                               VCC
+        +---+---+                              -----
+            |                                    |
+            V proportional to T             +----+----+
+            |                          D+ --+         |
+            +---- Vout                      | LTC2997 +--- Vout
+            |                          D- --+         |
+        +---+----+                          +---------+
+        | Rsense |                               |
+        +---+----+                             -----
+            |                                   GND
+          -----
+           GND
+
+properties:
+  compatible:
+    const: temperature-transducer
+
+  io-channels:
+    maxItems: 1
+    description: |
+      Channel node of a voltage io-channel.
+
+  '#io-channel-cells':
+    const: 0
+
+  sense-offset-millicelsius:
+    description: |
+      Temperature offset.
+      This offset is commonly used to convert from Kelvins to degrees Celsius.
+      In that case, sense-offset-millicelsius would be set to <(-273150)>.
+    default: 0
+
+  sense-resistor-ohms:
+    description: |
+      The sense resistor.
+      By default sense-resistor-ohms cancels out the resistor making the
+      circuit behave like a temperature transducer.
+    default: 1
+
+  alpha-ppm-per-celsius:
+    description: |
+      Sometimes referred to as output gain, slope, or temperature coefficient.
+
+      alpha is expressed in parts per million which can be micro-amps per
+      degrees Celsius or micro-volts per degrees Celsius. The is the main
+      characteristic of a temperature transducer and should be stated in the
+      datasheet.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - io-channels
+  - alpha-ppm-per-celsius
+
+examples:
+  - |
+    ad950: temperature-sensor-0 {
+        compatible = "temperature-transducer";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc 3>;
+
+        sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */
+        sense-resistor-ohms = <8060>;
+        alpha-ppm-per-celsius = <1>; /* 1 uA/K */
+    };
+  - |
+    znq_tmp: temperature-sensor-1 {
+        compatible = "temperature-transducer";
+        #io-channel-cells = <0>;
+        io-channels = <&temp_adc 2>;
+
+        sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */
+        alpha-ppm-per-celsius = <4000>; /* 4 mV/K */
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
new file mode 100644
index 000000000000..c15da155d300
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,ada4250.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/amplifiers/adi,ada4250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADA4250 Programmable Gain Instrumentation Amplifier
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+  Precision Low Power, 110kHz, 26uA, Programmable Gain Instrumentation Amplifier.
+
+properties:
+  compatible:
+    enum:
+      - adi,ada4250
+
+  reg:
+    maxItems: 1
+
+  avdd-supply: true
+
+  adi,refbuf-enable:
+    description:
+      Enable internal buffer to drive the reference pin.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      amplifier@0 {
+        compatible = "adi,ada4250";
+        reg = <0>;
+        avdd-supply = <&avdd>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
index a557761d8016..9fda56fa49c3 100644
--- a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
+++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
@@ -8,7 +8,6 @@ title: HMC425A 6-bit Digital Step Attenuator
 
 maintainers:
   - Michael Hennerich <michael.hennerich@analog.com>
-  - Beniamin Bia <beniamin.bia@analog.com>
 
 description: |
   Digital Step Attenuator IIO device with gpio interface.
diff --git a/Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml b/Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml
new file mode 100644
index 000000000000..337fe09e4bb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/senseair,sunrise.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/senseair,sunrise.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Senseair Sunrise 006-0-0007 CO2 Sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo@jmondi.org>
+
+description: |
+  Senseair Sunrise 006-0-0007 is a NDIR CO2 sensor. It supports I2C or UART buses
+  for communications and control.
+
+  Datasheets:
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/PSP11704.pdf
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/PSH11649.pdf
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Dev/publicerat/TDE5531.pdf
+    https://rmtplusstoragesenseair.blob.core.windows.net/docs/Market/publicerat/TDE7318.pdf
+
+properties:
+  compatible:
+    const: senseair,sunrise-006-0-0007
+
+  reg:
+    maxItems: 1
+
+  ndry-gpios:
+    maxItems: 1
+    description:
+      Phandle to the GPIO line connected to the nDRY pin. Typically active low.
+
+  en-gpios:
+    maxItems: 1
+    description:
+      Phandle to the GPIO line connected to the EN pin. Typically active high.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      co2-sensor@68 {
+        compatible = "senseair,sunrise-006-0-0007";
+        reg = <0x68>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,scd4x.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd4x.yaml
new file mode 100644
index 000000000000..798f48d05279
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,scd4x.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/sensirion,scd4x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SCD4X carbon dioxide sensor
+
+maintainers:
+  - Roan van Dijk <roan@protonic.nl>
+
+description: |
+  Air quality sensor capable of measuring co2 concentration, temperature
+  and relative humidity.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,scd40
+      - sensirion,scd41
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      co2-sensor@62 {
+        compatible = "sensirion,scd41";
+        reg = <0x62>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
new file mode 100644
index 000000000000..96340a05754c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
@@ -0,0 +1,218 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2020 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad3552r.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD2552R DAC device driver
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD3552R DAC device and similar.
+  Datasheet can be found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3542r.pdf
+    https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad3542r
+      - adi,ad3552r
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 30000000
+
+  reset-gpios:
+    maxItems: 1
+
+  ldac-gpios:
+    description: |
+      LDAC pin to be used as a hardware trigger to update the DAC channels.
+    maxItems: 1
+
+  vref-supply:
+    description:
+      The regulator to use as an external reference. If it does not exists the
+      internal reference will be used. External reference must be 2.5V
+
+  adi,vref-out-en:
+    description: Vref I/O driven by internal vref to 2.5V. If not set, Vref pin
+      will be floating.
+    type: boolean
+
+  adi,sdo-drive-strength:
+    description: |
+      Configure SDIO0 and SDIO1 strength levels:
+        - 0: low SDO drive strength.
+        - 1: medium low SDO drive strength.
+        - 2: medium high SDO drive strength.
+        - 3: high SDO drive strength
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-1])$":
+    type: object
+    description: Configurations of the DAC Channels
+
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: Channel number
+        enum: [0, 1]
+
+      adi,output-range-microvolt: true
+
+      custom-output-range-config:
+        type: object
+        additionalProperties: false
+        description: Configuration of custom range when
+          adi,output-range-microvolt is not present.
+          The formulas for calculation the output voltages are
+            Vout_fs = 2.5 + [(GainN + Offset/1024) * 2.5 * Rfbx * 1.03]
+            Vout_zs = 2.5 - [(GainP + Offset/1024) * 2.5 * Rfbx * 1.03]
+
+        properties:
+          adi,gain-offset:
+            description: Gain offset used in the above formula
+            $ref: /schemas/types.yaml#/definitions/int32
+            maximum: 511
+            minimum: -511
+
+          adi,gain-scaling-p-inv-log2:
+            description: GainP = 1 / ( 2 ^ adi,gain-scaling-p-inv-log2)
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          adi,gain-scaling-n-inv-log2:
+            description: GainN = 1 / ( 2 ^ adi,gain-scaling-n-inv-log2)
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          adi,rfb-ohms:
+            description: Feedback Resistor
+
+        required:
+          - adi,gain-offset
+          - adi,gain-scaling-p-inv-log2
+          - adi,gain-scaling-n-inv-log2
+          - adi,rfb-ohms
+
+    required:
+      - reg
+
+    oneOf:
+      # If adi,output-range-microvolt is missing,
+      # custom-output-range-config must be used
+      - required:
+          - adi,output-range-microvolt
+
+      - required:
+          - custom-output-range-config
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad3542r
+    then:
+      patternProperties:
+        "^channel@([0-1])$":
+          type: object
+          properties:
+            adi,output-range-microvolt:
+              description: |
+                Voltage output range of the channel as <minimum, maximum>
+                Required connections:
+                  Rfb1x for: 0 to 2.5 V; 0 to 3V; 0 to 5 V;
+                  Rfb2x for: 0 to 10 V; 2.5 to 7.5V; -5 to 5 V;
+              oneOf:
+                - items:
+                    - const: 0
+                    - enum: [2500000, 3000000, 5000000, 10000000]
+                - items:
+                    - const: -2500000
+                    - const: 7500000
+                - items:
+                    - const: -5000000
+                    - const: 5000000
+
+          required:
+            - adi,output-range-microvolt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,ad3552r
+    then:
+      patternProperties:
+        "^channel@([0-1])$":
+          type: object
+          properties:
+            adi,output-range-microvolt:
+              description: |
+                Voltage output range of the channel as <minimum, maximum>
+                Required connections:
+                  Rfb1x for: 0 to 2.5 V; 0 to 5 V;
+                  Rfb2x for: 0 to 10 V; -5 to 5 V;
+                  Rfb4x for: -10 to 10V
+              oneOf:
+                - items:
+                    - const: 0
+                    - enum: [2500000, 5000000, 10000000]
+                - items:
+                    - const: -5000000
+                    - const: 5000000
+                - items:
+                    - const: -10000000
+                    - const: 10000000
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ad3552r@0 {
+            compatible = "adi,ad3552r";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                reg = <0>;
+                adi,output-range-microvolt = <0 10000000>;
+            };
+            channel@1 {
+                reg = <1>;
+                custom-output-range-config {
+                    adi,gain-offset = <5>;
+                    adi,gain-scaling-p-inv-log2 = <1>;
+                    adi,gain-scaling-n-inv-log2 = <2>;
+                    adi,rfb-ohms = <1>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
index 05ed4e0ec364..c04165fa9259 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5064.yaml
@@ -95,15 +95,12 @@ properties:
   vrefD-supply: true
   vref-supply: true
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - # Shared external vref, no internal reference
     if:
       properties:
@@ -232,6 +229,8 @@ allOf:
         - vrefA-supply
         - vrefB-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
index 0d8fb56f4b09..86e2884cdfb1 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5360.yaml
@@ -28,10 +28,6 @@ properties:
   vref1-supply: true
   vref2-supply: true
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -39,6 +35,7 @@ required:
   - vref1-supply
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -59,9 +56,11 @@ allOf:
           contains:
             enum:
               - adi,ad5371
-      then:
-        required:
-          - vref2-supply
+    then:
+      required:
+        - vref2-supply
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
index d599b418a020..9eb9928500e2 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
@@ -12,6 +12,7 @@ maintainers:
 
 description: |
   DAC devices supporting both SPI and I2C interfaces.
+
 properties:
   compatible:
     enum:
@@ -39,14 +40,15 @@ properties:
     description:
       If not supplied devices will use internal regulators.
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
index 188f656617e3..52d089ebde95 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5421.yaml
@@ -26,13 +26,14 @@ properties:
     maxItems: 1
     description: Fault signal.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
index 044332c97743..d2af2d491986 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5449.yaml
@@ -27,19 +27,16 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   VREF-supply: true
   VREFA-supply: true
   VREFB-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -72,6 +69,8 @@ allOf:
         - VREFA-supply
         - VREFB-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
index 330383b85eeb..4d5111a5f9bd 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5624r.yaml
@@ -22,17 +22,18 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: If not present, internal reference will be used.
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
index 5c26441eae9f..b4400c52bec3 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
@@ -33,6 +33,7 @@ properties:
       - description: I2C devices
         enum:
           - adi,ad5311r
+          - adi,ad5337r
           - adi,ad5338r
           - adi,ad5671r
           - adi,ad5675r
@@ -53,14 +54,15 @@ properties:
   vcc-supply:
     description: If not supplied the internal reference is used.
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
index be419ac46caa..9a3c2926bf85 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5755.yaml
@@ -25,8 +25,6 @@ properties:
     description: Either this or spi-cpol but not both.
   spi-cpol: true
 
-  spi-max-frequency: true
-
   adi,ext-dc-dc-compenstation-resistor:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
@@ -67,8 +65,6 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
-
 patternProperties:
   "^channel@[0-7]$":
     type: object
@@ -123,9 +119,13 @@ oneOf:
   - required:
       - spi-cpol
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
-    #include <dt-bindings/iio/adi,ad5592r.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
index fd4edca34a28..4e508bfcc9d8 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
@@ -16,7 +16,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
   spi-cpha: true
 
   adi,dc-dc-mode:
@@ -99,11 +98,11 @@ required:
   - adi,dc-dc-mode
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         adi,dc-dc-mode:
-          contains:
-            enum: [1, 3]
+          enum: [1, 3]
     then:
       properties:
         adi,range-microvolt: false
@@ -115,7 +114,7 @@ allOf:
       required:
         - adi,range-microvolt
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
index 7f95a9ed55fe..df550b5af2f7 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5761.yaml
@@ -22,18 +22,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply:
     description: If not supplied, internal reference will be used.
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -45,6 +42,8 @@ allOf:
       required:
         - vref-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
index 8e893d52bfb1..0b409a727a43 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5764.yaml
@@ -22,18 +22,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vrefAB-supply: true
   vrefCD-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -46,6 +43,8 @@ allOf:
         - vrefAB-supply
         - vrefCD-supply
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
index d5c54813ce87..212c936bab8d 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5766.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices AD5766 DAC device driver
 
 maintainers:
-  - Cristian Pop <cristian.pop@analog.com>
+  - Nuno Sá <nuno.sa@analog.com>
 
 description: |
   Bindings for the Analog Devices AD5766 current DAC device. Datasheet can be
@@ -22,6 +22,8 @@ properties:
       - adi,ad5767
 
   output-range-microvolts:
+    $ref: /schemas/types.yaml#/definitions/int32-array
+    maxItems: 2
     description: Select converter output range.
 
   reg:
@@ -49,15 +51,15 @@ additionalProperties: false
 examples:
   - |
     spi {
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          ad5766@0 {
-              compatible = "adi,ad5766";
-              output-range-microvolts = <(-5000) 5000>;
-              reg = <0>;
-              spi-cpol;
-              spi-max-frequency = <1000000>;
-              reset-gpios = <&gpio 22 0>;
-            };
-      };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ad5766@0 {
+            compatible = "adi,ad5766";
+            output-range-microvolts = <(-5000000) 5000000>;
+            reg = <0>;
+            spi-cpol;
+            spi-max-frequency = <1000000>;
+            reset-gpios = <&gpio 22 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
index fb2c48fc7ce4..82b0eed6a7b7 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices AD5770R DAC device driver
 
 maintainers:
-  - Mircea Caprioru <mircea.caprioru@analog.com>
+  - Alexandru Tachici <alexandru.tachici@analog.com>
 
 description: |
   Bindings for the Analog Devices AD5770R current DAC device. Datasheet can be
@@ -49,8 +49,6 @@ properties:
       asserted during driver probe.
     maxItems: 1
 
-  spi-max-frequency: true
-
   '#address-cells':
     const: 1
 
@@ -62,6 +60,7 @@ properties:
       connected to the DAC. Channel 0 can act both as a current
       source and sink.
     type: object
+    additionalProperties: false
 
     properties:
       reg:
@@ -85,6 +84,7 @@ properties:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
+    additionalProperties: false
 
     properties:
       reg:
@@ -101,6 +101,7 @@ properties:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
+    additionalProperties: false
 
     properties:
       reg:
@@ -116,6 +117,7 @@ properties:
 patternProperties:
   "^channel@([3-5])$":
     type: object
+    additionalProperties: false
     description: Represents the external channels which are connected to the DAC.
     properties:
       reg:
@@ -138,53 +140,56 @@ required:
   - channel@4
   - channel@5
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-        spi {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                ad5770r@0 {
-                        compatible = "adi,ad5770r";
-                        reg = <0>;
-                        spi-max-frequency = <1000000>;
-                        vref-supply = <&vref>;
-                        adi,external-resistor;
-                        reset-gpios = <&gpio 22 0>;
-                        #address-cells = <1>;
-                        #size-cells = <0>;
-
-                        channel@0 {
-                                reg = <0>;
-                                adi,range-microamp = <0 300000>;
-                        };
-
-                        channel@1 {
-                                reg = <1>;
-                                adi,range-microamp = <0 140000>;
-                        };
-
-                        channel@2 {
-                                reg = <2>;
-                                adi,range-microamp = <0 55000>;
-                        };
-
-                        channel@3 {
-                                reg = <3>;
-                                adi,range-microamp = <0 45000>;
-                        };
-
-                        channel@4 {
-                                reg = <4>;
-                                adi,range-microamp = <0 45000>;
-                        };
-
-                        channel@5 {
-                                reg = <5>;
-                                adi,range-microamp = <0 45000>;
-                        };
-                };
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ad5770r@0 {
+            compatible = "adi,ad5770r";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            vref-supply = <&vref>;
+            adi,external-resistor;
+            reset-gpios = <&gpio 22 0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            channel@0 {
+                reg = <0>;
+                adi,range-microamp = <0 300000>;
+            };
+
+            channel@1 {
+                reg = <1>;
+                adi,range-microamp = <0 140000>;
+            };
+
+            channel@2 {
+                reg = <2>;
+                adi,range-microamp = <0 55000>;
+            };
+
+            channel@3 {
+                reg = <3>;
+                adi,range-microamp = <0 45000>;
+            };
+
+            channel@4 {
+                reg = <4>;
+                adi,range-microamp = <0 45000>;
+            };
+
+            channel@5 {
+                reg = <5>;
+                adi,range-microamp = <0 45000>;
+            };
         };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
index 650d1ebdcec3..3a84739736f6 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5791.yaml
@@ -23,19 +23,20 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
   vss-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vdd-supply
   - vss-supply
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml
new file mode 100644
index 000000000000..5ee80bf6aa11
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad7293.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ad7293.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7293 12-Bit Power Amplifier Current Controller with ADC,
+       DACs, Temperature and Current Sensors
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Power Amplifier drain current controller containing functionality
+   for general-purpose monitoring and control of current, voltage,
+   and temperature, integrated into a single chip solution with an
+   SPI-compatible interface.
+
+   https://www.analog.com/en/products/ad7293.html
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7293
+
+  avdd-supply: true
+
+  vdrive-supply: true
+
+  reset-gpios:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - vdrive-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ad7293@0 {
+        compatible = "adi,ad7293";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        avdd-supply = <&avdd>;
+        vdrive-supply = <&vdrive>;
+        reset-gpios = <&gpio 10 0>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
index 6a3990a8d0ad..1849a2ff05c7 100644
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8801.yaml
@@ -19,19 +19,16 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vrefh-supply: true
   vrefl-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vrefh-supply
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -44,6 +41,8 @@ allOf:
       properties:
         vrefl-supply: false
 
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
new file mode 100644
index 000000000000..f22ef710ecde
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2688.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/adi,ltc2688.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LTC2688 DAC
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices LTC2688 16 channel, 16 bit, +-15V DAC
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2688.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2688
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Analog Supply Voltage Input.
+
+  iovcc-supply:
+    description: Digital Input/Output Supply Voltage.
+
+  vref-supply:
+    description:
+      Reference Input/Output. The voltage at the REF pin sets the full-scale
+      range of all channels. If not provided the internal reference is used and
+      also provided on the VREF pin".
+
+  clr-gpios:
+    description:
+      If specified, it will be asserted during driver probe. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  "^channel@([0-9]|1[0-5])$":
+    type: object
+    additionalProperties: false
+
+    properties:
+      reg:
+        description: The channel number representing the DAC output channel.
+        maximum: 15
+
+      adi,toggle-mode:
+        description:
+          Set the channel as a toggle enabled channel. Toggle operation enables
+          fast switching of a DAC output between two different DAC codes without
+          any SPI transaction.
+        type: boolean
+
+      adi,output-range-microvolt:
+        description: Specify the channel output full scale range.
+        oneOf:
+          - items:
+              - const: 0
+              - enum: [5000000, 10000000]
+          - items:
+              - const: -5000000
+              - const: 5000000
+          - items:
+              - const: -10000000
+              - const: 10000000
+          - items:
+              - const: -15000000
+              - const: 15000000
+
+      adi,overrange:
+        description: Enable 5% overrange over the selected full scale range.
+        type: boolean
+
+      clocks:
+        maxItems: 1
+
+      adi,toggle-dither-input:
+        description:
+          Selects the TGPx pin to be associated with this channel. This setting
+          only makes sense for toggle or dither enabled channels. If
+          @adi,toggle-mode is not set and this property is given, the channel is
+          assumed to be a dither capable channel. Note that multiple channels
+          can be mapped to the same pin. If this setting is given, the
+          respective @clock must also be provided. Mappings between this and
+          input pins
+            0 - TGP1
+            1 - TGP2
+            2 - TGP3
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
+
+    dependencies:
+      adi,toggle-dither-input: [ clocks ]
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        ltc2688: ltc2688@0 {
+            compatible = "adi,ltc2688";
+            reg = <0>;
+
+            vcc-supply = <&vcc>;
+            iovcc-supply = <&vcc>;
+            vref-supply = <&vref>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                reg = <0>;
+                adi,toggle-mode;
+                adi,overrange;
+            };
+
+            channel@1 {
+                reg = <1>;
+                adi,output-range-microvolt = <0 10000000>;
+
+                clocks = <&clock_tgp3>;
+                adi,toggle-dither-input = <2>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
index e51a585bd5a3..c9f51d00fa8f 100644
--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs
 
@@ -41,7 +41,7 @@ examples:
     spi {
       #address-cells = <1>;
       #size-cells = <0>;
-  
+
       dac@0 {
         compatible = "lltc,ltc1660";
         reg = <0>;
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
index edf804d0aca2..733edc7d6d17 100644
--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC
 
@@ -64,14 +64,14 @@ examples:
     };
 
     spi {
-      #address-cells = <1>;
-      #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-      dac@0 {
-        compatible = "lltc,ltc2632";
-        reg = <0>;    /* CS0 */
-        spi-max-frequency = <1000000>;
-        vref-supply = <&vref>;
-      };
+        dac@0 {
+            compatible = "lltc,ltc2632-l12";
+            reg = <0>;    /* CS0 */
+            spi-max-frequency = <1000000>;
+            vref-supply = <&vref>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/dac/maxim,max5522.yaml b/Documentation/devicetree/bindings/iio/dac/maxim,max5522.yaml
new file mode 100644
index 000000000000..24830f56c501
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/maxim,max5522.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/maxim,max5522.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX5522 Dual 10-bit Voltage-Output SPI DACs
+
+maintainers:
+  - Angelo Dureghello <angelo.dureghello@timesys.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Datasheet available at:
+  https://www.analog.com/en/products/max5522.html
+
+properties:
+  compatible:
+    const: maxim,max5522
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vrefin-supply: true
+
+required:
+  - compatible
+  - reg
+  - vrefin-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "maxim,max5522";
+            reg = <0>;
+            vrefin-supply = <&vref>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
index 12a14b3f36cb..19374401e509 100644
--- a/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp4922.yaml
@@ -15,22 +15,24 @@ properties:
     enum:
       - microchip,mcp4902
       - microchip,mcp4912
+      - microchip,mcp4921
       - microchip,mcp4922
 
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vref-supply: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - vref-supply
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/dac/nxp,lpc1850-dac.yaml b/Documentation/devicetree/bindings/iio/dac/nxp,lpc1850-dac.yaml
index 595f481c548e..9c8afe3f1b69 100644
--- a/Documentation/devicetree/bindings/iio/dac/nxp,lpc1850-dac.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/nxp,lpc1850-dac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/dac/nxp,lpc1850-dac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP LPC1850 DAC bindings
+title: NXP LPC1850 DAC
 
 maintainers:
   - Jonathan Cameron <jic23@kernel.org>
diff --git a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
index 393f7005941a..04045b932bd2 100644
--- a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 DAC bindings
+title: STMicroelectronics STM32 DAC
 
 description: |
   The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC
@@ -15,7 +15,7 @@ description: |
   current.
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
index b0157050f1ee..201b04af2b22 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac082s085.yaml
@@ -33,21 +33,22 @@ properties:
   vref-supply:
     description: Needed to provide output scaling.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - vref-supply
 
-additionalProperties: false
-
 oneOf:
   - required:
       - spi-cpha
   - required:
       - spi-cpol
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     vref_2v5_reg: regulator-vref {
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
index 714191724f7c..79da0323c327 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
@@ -21,6 +21,7 @@ properties:
       - ti,dac5573
       - ti,dac6573
       - ti,dac7573
+      - ti,dac121c081
 
   reg:
     maxItems: 1
@@ -45,7 +46,7 @@ examples:
 
         dac@4c {
             compatible = "ti,dac5571";
-            reg = <0x4C>;
+            reg = <0x4c>;
             vref-supply = <&vdd_supply>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
index 10be98d1f19c..a6814587dbc4 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7311.yaml
@@ -24,14 +24,15 @@ properties:
       Reference voltage must be supplied to establish the scaling of the
       output voltage.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - vref-supply
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
index d172b142f6ed..20dd1370660d 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.yaml
@@ -29,13 +29,14 @@ properties:
       DACs are loaded when the pin connected to this GPIO is pulled low.
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml b/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
new file mode 100644
index 000000000000..b77e855bd594
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/filter/adi,admv8818.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/filter/adi,admv8818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV8818 Digitally Tunable, High-Pass and Low-Pass Filter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+    Fully monolithic microwave integrated circuit (MMIC) that
+    features a digitally selectable frequency of operation.
+    The device features four independently controlled high-pass
+    filters (HPFs) and four independently controlled low-pass filters
+    (LPFs) that span the 2 GHz to 18 GHz frequency range.
+
+    https://www.analog.com/en/products/admv8818.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv8818
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 10000000
+
+  clocks:
+    description:
+      Definition of the external clock.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: rf_in
+
+  clock-output-names:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      admv8818@0 {
+        compatible = "adi,admv8818";
+        reg = <0>;
+        spi-max-frequency = <10000000>;
+        clocks = <&admv8818_rfin>;
+        clock-names = "rf_in";
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
index 6b3a611e1cf1..1cb2adaf66f9 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -40,28 +40,29 @@ properties:
       output stage will shut down until the ADF4371/ADF4372 achieves lock as
       measured by the digital lock detect circuitry.
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
   - clocks
   - clock-names
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
         frequency@0 {
-                compatible = "adi,adf4371";
-                reg = <0>;
-                spi-max-frequency = <1000000>;
-                clocks = <&adf4371_clkin>;
-                clock-names = "clkin";
+            compatible = "adi,adf4371";
+            reg = <0>;
+            spi-max-frequency = <1000000>;
+            clocks = <&adf4371_clkin>;
+            clock-names = "clkin";
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml
index d7f20b8518e0..43cbf27114c7 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,adf4350.yaml
@@ -160,13 +160,16 @@ properties:
       2: +2dBm
       3: +5dBm
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
   - clocks
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml
new file mode 100644
index 000000000000..aa6a3193b4e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,adf4377.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,adf4377.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADF4377 Microwave Wideband Synthesizer with Integrated VCO
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+  - Dragos Bogdan <dragos.bogdan@analog.com>
+
+description: |
+   The ADF4377 is a high performance, ultralow jitter, dual output integer-N
+   phased locked loop (PLL) with integrated voltage controlled oscillator (VCO)
+   ideally suited for data converter and mixed signal front end (MxFE) clock
+   applications.
+
+   https://www.analog.com/en/products/adf4377.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adf4377
+      - adi,adf4378
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 10000000
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description:
+      External clock that provides reference input frequency.
+    items:
+      - const: ref_in
+
+  chip-enable-gpios:
+    description:
+      GPIO that controls the Chip Enable Pin.
+    maxItems: 1
+
+  clk1-enable-gpios:
+    description:
+      GPIO that controls the Enable Clock 1 Output Buffer Pin.
+    maxItems: 1
+
+  clk2-enable-gpios:
+    description:
+      GPIO that controls the Enable Clock 2 Output Buffer Pin.
+    maxItems: 1
+
+  adi,muxout-select:
+    description:
+      On chip multiplexer output selection.
+      high_z - MUXOUT Pin set to high-Z.
+      lock_detect - MUXOUT Pin set to lock detector output.
+      muxout_low - MUXOUT Pin set to low.
+      f_div_rclk_2 - MUXOUT Pin set to fDIV_RCLK/2.
+      f_div_nclk_2 - MUXOUT Pin set to fDIV_NCLK/2.
+      muxout_high - MUXOUT Pin set to high.
+    enum: [high_z, lock_detect, muxout_low, f_div_rclk_2, f_div_nclk_2, muxout_high]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        frequency@0 {
+            compatible = "adi,adf4377";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            clocks = <&adf4377_ref_in>;
+            clock-names = "ref_in";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
new file mode 100644
index 000000000000..fc813bcb6532
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1013.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv1013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV1013 Microwave Upconverter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Wideband, microwave upconverter optimized for point to point microwave
+   radio designs operating in the 24 GHz to 44 GHz frequency range.
+
+   https://www.analog.com/en/products/admv1013.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv1013
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  clocks:
+    description:
+      Definition of the external clock.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: lo_in
+
+  vcm-supply:
+    description:
+      Analog voltage regulator.
+
+  adi,detector-enable:
+    description:
+      Enable the Envelope Detector available at output pins VENV_P and
+      VENV_N. Disable to reduce power consumption.
+    type: boolean
+
+  adi,input-mode:
+    description:
+      Select the input mode.
+      iq - in-phase quadrature (I/Q) input
+      if - complex intermediate frequency (IF) input
+    enum: [iq, if]
+
+  adi,quad-se-mode:
+    description:
+      Switch the LO path from differential to single-ended operation.
+      se-neg - Single-Ended Mode, Negative Side Disabled.
+      se-pos - Single-Ended Mode, Positive Side Disabled.
+      diff - Differential Mode.
+    enum: [se-neg, se-pos, diff]
+
+  '#clock-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vcm-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      admv1013@0{
+        compatible = "adi,admv1013";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        clocks = <&admv1013_lo>;
+        clock-names = "lo_in";
+        vcm-supply = <&vcm>;
+        adi,quad-se-mode = "diff";
+        adi,detector-enable;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
new file mode 100644
index 000000000000..ab86daa2c56e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv1014.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV1014 Microwave Downconverter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Wideband, microwave downconverter optimized for point to point microwave
+   radio designs operating in the 24 GHz to 44 GHz frequency range.
+
+   https://www.analog.com/en/products/admv1014.html
+
+properties:
+  compatible:
+    enum:
+      - adi,admv1014
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: lo_in
+    description:
+      External clock that provides the Local Oscilator input.
+
+  vcm-supply:
+    description:
+      Common-mode voltage regulator.
+
+  vcc-if-bb-supply:
+    description:
+      BB and IF supply voltage regulator.
+
+  vcc-vga-supply:
+    description:
+      RF Amplifier supply voltage regulator.
+
+  vcc-vva-supply:
+    description:
+      VVA Control Circuit supply voltage regulator.
+
+  vcc-lna-3p3-supply:
+    description:
+      Low Noise Amplifier 3.3V supply voltage regulator.
+
+  vcc-lna-1p5-supply:
+    description:
+      Low Noise Amplifier 1.5V supply voltage regulator.
+
+  vcc-bg-supply:
+    description:
+      Band Gap Circuit supply voltage regulator.
+
+  vcc-quad-supply:
+    description:
+      Quadruple supply voltage regulator.
+
+  vcc-mixer-supply:
+    description:
+      Mixer supply voltage regulator.
+
+  adi,input-mode:
+    description:
+      Select the input mode.
+      iq - in-phase quadrature (I/Q) input
+      if - complex intermediate frequency (IF) input
+    enum: [iq, if]
+
+  adi,detector-enable:
+    description:
+      Digital Rx Detector Enable. The Square Law Detector output is
+      available at output pin VDET.
+    type: boolean
+
+  adi,p1db-compensation-enable:
+    description:
+      Turn on bits to optimize P1dB.
+    type: boolean
+
+  adi,quad-se-mode:
+    description:
+      Switch the LO path from differential to single-ended operation.
+      se-neg - Single-Ended Mode, Negative Side Disabled.
+      se-pos - Single-Ended Mode, Positive Side Disabled.
+      diff - Differential Mode.
+    enum: [se-neg, se-pos, diff]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vcm-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      converter@0 {
+        compatible = "adi,admv1014";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        clocks = <&admv1014_lo>;
+        clock-names = "lo_in";
+        vcm-supply = <&vcm>;
+        vcc-if-bb-supply = <&vcc_if_bb>;
+        vcc-vga-supply = <&vcc_vga>;
+        vcc-vva-supply = <&vcc_vva>;
+        vcc-lna-3p3-supply = <&vcc_lna_3p3>;
+        vcc-lna-1p5-supply = <&vcc_lna_1p5>;
+        vcc-bg-supply = <&vcc_bg>;
+        vcc-quad-supply = <&vcc_quad>;
+        vcc-mixer-supply = <&vcc_mixer>;
+        adi,quad-se-mode = "diff";
+        adi,detector-enable;
+        adi,p1db-compensation-enable;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
new file mode 100644
index 000000000000..64f2352aac3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,admv4420.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADMV4420 K Band Downconverter
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description:
+  The ADMV4420 is a highly integrated, double balanced, active
+  mixer with an integrated fractional-N synthesizer, ideally suited
+  for next generation K band satellite communications
+
+properties:
+  compatible:
+    enum:
+      - adi,admv4420
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  adi,lo-freq-khz:
+    description: LO Frequency
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  adi,ref-ext-single-ended-en:
+    description: External reference selected.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mixer@0 {
+        compatible = "adi,admv4420";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        adi,lo-freq-khz = <16750000>;
+        adi,ref-ext-single-ended-en;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
new file mode 100644
index 000000000000..f11391ab4b62
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adi,adrf6780.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADRF6780 Microwave Upconverter
+
+maintainers:
+  - Antoniu Miclaus <antoniu.miclaus@analog.com>
+
+description: |
+   Wideband, microwave upconverter optimized for point to point microwave
+   radio designs operating in the 5.9 GHz to 23.6 GHz frequency range.
+
+   https://www.analog.com/en/products/adrf6780.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adrf6780
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 1000000
+
+  clocks:
+    description:
+      Definition of the external clock.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: lo_in
+
+  clock-output-names:
+    maxItems: 1
+
+  adi,vga-buff-en:
+    description:
+      RF Variable Gain Amplifier Buffer Enable. Gain is controlled by
+      the voltage on the VATT pin.
+    type: boolean
+
+  adi,lo-buff-en:
+    description:
+      Local Oscillator Amplifier Enable. Disable to put the part in
+      a power down state.
+    type: boolean
+
+  adi,if-mode-en:
+    description:
+      Intermediate Frequency Mode Enable. Either IF Mode or I/Q Mode
+      can be enabled at a time.
+    type: boolean
+
+  adi,iq-mode-en:
+    description:
+      I/Q Mode Enable. Either IF Mode or I/Q Mode can be enabled at a
+      time.
+    type: boolean
+
+  adi,lo-x2-en:
+    description:
+      Double the Local Oscillator output frequency from the Local
+      Oscillator Input Frequency. Either LOx1 or LOx2 can be enabled
+      at a time.
+    type: boolean
+
+  adi,lo-ppf-en:
+    description:
+      Local Oscillator input frequency equal to the Local Oscillator
+      output frequency (LO x1). Either LOx1 or LOx2 can be enabled
+      at a time.
+    type: boolean
+
+  adi,lo-en:
+    description:
+      Enable additional cirtuitry in the LO chain. Disable to put the
+      part in a power down state.
+    type: boolean
+
+  adi,uc-bias-en:
+    description:
+      Enable all bias circuitry thourghout the entire part.
+      Disable to put the part in a power down state.
+    type: boolean
+
+  adi,lo-sideband:
+    description:
+      Switch to the Lower LO Sideband. By default the Upper LO
+      sideband is enabled.
+    type: boolean
+
+  adi,vdet-out-en:
+    description:
+      VDET Output Select Enable. Expose the RF detector output to the
+      VDET external pin.
+    type: boolean
+
+  '#clock-cells':
+    const: 0
+
+dependencies:
+  adi,lo-x2-en: [ "adi,lo-en" ]
+  adi,lo-ppf-en: [ "adi,lo-en" ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      adrf6780@0 {
+        compatible = "adi,adrf6780";
+        reg = <0>;
+        spi-max-frequency = <1000000>;
+        clocks = <&adrf6780_lo>;
+        clock-names = "lo_in";
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
index 662ec59ca0af..3d94dd4612c4 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
@@ -38,7 +38,10 @@ required:
   - spi-cpol
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -47,13 +50,13 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         gyro@0 {
-                   compatible = "adi,adxrs290";
-                   reg = <0>;
-                   spi-max-frequency = <5000000>;
-                   spi-cpol;
-                   spi-cpha;
-                   interrupt-parent = <&gpio>;
-                   interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            compatible = "adi,adxrs290";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpol;
+            spi-cpha;
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
index b6bbc312a7cf..1414ba9977c1 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml
@@ -24,8 +24,10 @@ properties:
 
   interrupts:
     minItems: 1
+    maxItems: 2
     description:
       Should be configured with type IRQ_TYPE_EDGE_RISING.
+      If two interrupts are provided, expected order is INT1 and INT2.
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
index 7e2accc3d5ce..d1a6103fc37a 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml
@@ -61,7 +61,7 @@ examples:
                 #size-cells = <0>;
 
                 magnetometer@c {
-                    compatible = "ak,ak8975";
+                    compatible = "asahi-kasei,ak8975";
                     reg = <0x0c>;
                 };
             };
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
index 3f57a1b813e6..297d519d68f2 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
@@ -56,40 +56,43 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         gyroscope@20 {
-          compatible = "nxp,fxas21002c";
-          reg = <0x20>;
+            compatible = "nxp,fxas21002c";
+            reg = <0x20>;
 
-          vdd-supply = <&reg_peri_3p15v>;
-          vddio-supply = <&reg_peri_3p15v>;
+            vdd-supply = <&reg_peri_3p15v>;
+            vddio-supply = <&reg_peri_3p15v>;
 
-          interrupt-parent = <&gpio1>;
-          interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-          interrupt-names = "INT1";
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
         };
     };
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
         gyroscope@0 {
-          compatible = "nxp,fxas21002c";
-          reg = <0x0>;
+            compatible = "nxp,fxas21002c";
+            reg = <0x0>;
 
-          spi-max-frequency = <2000000>;
+            spi-max-frequency = <2000000>;
 
-          interrupt-parent = <&gpio2>;
-          interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-          interrupt-names = "INT2";
+            interrupt-parent = <&gpio2>;
+            interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT2";
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
index d861526c5c42..b9b5beac33b2 100644
--- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
@@ -25,14 +25,15 @@ properties:
 
   reset-gpios: true
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
@@ -41,7 +42,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        heart_mon@0 {
+        heart-mon@0 {
             compatible = "ti,afe4403";
             reg = <0>;
             spi-max-frequency = <10000000>;
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
index c0e815d9999e..2958c4ca75b4 100644
--- a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
@@ -39,7 +39,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        heart_mon@58 {
+        heart-mon@58 {
             compatible = "ti,afe4404";
             reg = <0x58>;
             tx-supply = <&vbat>;
diff --git a/Documentation/devicetree/bindings/iio/humidity/dht11.yaml b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
index 2247481d0203..0103f4238942 100644
--- a/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
@@ -34,7 +34,7 @@ additionalProperties: false
 
 examples:
   - |
-    humidity_sensor {
+    humidity-sensor {
         compatible = "dht11";
         gpios = <&gpio0 6 0>;
     };
diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
index 88384b69f917..a2bc1fa92da0 100644
--- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
@@ -35,12 +35,12 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      humidity@40 {
-          compatible = "ti,hdc2010";
-          reg = <0x40>;
-      };
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        humidity@40 {
+            compatible = "ti,hdc2010";
+            reg = <0x40>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
index 340be256f283..4e43c80e5119 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
@@ -25,8 +25,6 @@ properties:
 
   spi-cpol: true
 
-  spi-max-frequency: true
-
   interrupts:
     maxItems: 1
 
@@ -35,13 +33,16 @@ required:
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
index a7574210175a..c73533c54588 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
@@ -79,6 +79,7 @@ required:
   - spi-cpol
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -107,23 +108,23 @@ allOf:
       dependencies:
         adi,sync-mode: [ clocks ]
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
     spi {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            adis16475: adis16475-3@0 {
-                    compatible = "adi,adis16475-3";
-                    reg = <0>;
-                    spi-cpha;
-                    spi-cpol;
-                    spi-max-frequency = <2000000>;
-                    interrupts = <4 IRQ_TYPE_EDGE_RISING>;
-                    interrupt-parent = <&gpio>;
-            };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adis16475: adis16475-3@0 {
+            compatible = "adi,adis16475-3";
+            reg = <0>;
+            spi-cpha;
+            spi-cpol;
+            spi-max-frequency = <2000000>;
+            interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+            interrupt-parent = <&gpio>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
index 5dbe24be9925..56e0dc20f5e4 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16480.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices ADIS16480 and similar IMUs
 
 maintainers:
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+  - Alexandru Tachici <alexandru.tachici@analog.com>
 
 properties:
   compatible:
@@ -47,8 +47,6 @@ properties:
         - DIO3
         - DIO4
 
-  spi-max-frequency: true
-
   spi-cpha: true
   spi-cpol: true
 
@@ -96,8 +94,6 @@ properties:
       - DIO3
       - DIO4
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -106,6 +102,11 @@ required:
   - spi-cpol
   - spi-max-frequency
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
index 6e73cd889b5c..47cfba939ca6 100644
--- a/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bmi160.yaml
@@ -46,13 +46,14 @@ properties:
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -63,16 +64,16 @@ examples:
         #size-cells = <0>;
 
         bmi160@68 {
-                compatible = "bosch,bmi160";
-                reg = <0x68>;
-                vdd-supply = <&pm8916_l17>;
-                vddio-supply = <&pm8916_l6>;
-                interrupt-parent = <&gpio4>;
-                interrupts = <12 IRQ_TYPE_EDGE_RISING>;
-                interrupt-names = "INT1";
-                mount-matrix = "0", "1", "0",
-                               "-1", "0", "0",
-                               "0", "0", "1";
+            compatible = "bosch,bmi160";
+            reg = <0x68>;
+            vdd-supply = <&pm8916_l17>;
+            vddio-supply = <&pm8916_l6>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
+            mount-matrix = "0", "1", "0",
+                           "-1", "0", "0",
+                           "0", "0", "1";
         };
     };
   - |
@@ -83,11 +84,11 @@ examples:
         #size-cells = <0>;
 
         bmi160@0 {
-                compatible = "bosch,bmi160";
-                reg = <0>;
-                spi-max-frequency = <10000000>;
-                interrupt-parent = <&gpio2>;
-                interrupts = <12 IRQ_TYPE_EDGE_RISING>;
-                interrupt-names = "INT2";
+            compatible = "bosch,bmi160";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <12 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT2";
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml
new file mode 100644
index 000000000000..e0d06db161a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/bosch,bno055.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/bosch,bno055.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BNO055
+
+maintainers:
+  - Andrea Merello <andrea.merello@iit.it>
+
+description: |
+  Inertial Measurement Unit with Accelerometer, Gyroscope, Magnetometer and
+  internal MCU for sensor fusion
+  https://www.bosch-sensortec.com/products/smart-sensors/bno055/
+
+properties:
+  compatible:
+    enum:
+      - bosch,bno055
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+      imu {
+        compatible = "bosch,bno055";
+        reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>;
+        clocks = <&imu_clk>;
+      };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      imu@28 {
+        compatible = "bosch,bno055";
+        reg = <0x28>;
+        reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>;
+        clocks = <&imu_clk>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 4c1c083d0e92..7cd05bcbee31 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -31,6 +31,7 @@ properties:
       - invensense,icm42602
       - invensense,icm42605
       - invensense,icm42622
+      - invensense,icm42631
 
   reg:
     maxItems: 1
@@ -47,7 +48,6 @@ properties:
   vddio-supply:
     description: Regulator that provides power to the bus
 
-  spi-max-frequency: true
   spi-cpha: true
   spi-cpol: true
 
@@ -56,41 +56,44 @@ required:
   - reg
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         icm42605@68 {
-          compatible = "invensense,icm42605";
-          reg = <0x68>;
-          interrupt-parent = <&gpio2>;
-          interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-          vdd-supply = <&vdd>;
-          vddio-supply = <&vddio>;
+            compatible = "invensense,icm42605";
+            reg = <0x68>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+            vdd-supply = <&vdd>;
+            vddio-supply = <&vddio>;
         };
     };
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
         icm42602@0 {
-          compatible = "invensense,icm42602";
-          reg = <0>;
-          spi-max-frequency = <24000000>;
-          spi-cpha;
-          spi-cpol;
-          interrupt-parent = <&gpio1>;
-          interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
-          vdd-supply = <&vdd>;
-          vddio-supply = <&vddio>;
+            compatible = "invensense,icm42602";
+            reg = <0>;
+            spi-max-frequency = <24000000>;
+            spi-cpha;
+            spi-cpol;
+            interrupt-parent = <&gpio1>;
+            interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+            vdd-supply = <&vdd>;
+            vddio-supply = <&vddio>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
index edbc2921aabd..ec64d7877fe5 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml
@@ -14,21 +14,25 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - invensense,iam20680
-      - invensense,icm20608
-      - invensense,icm20609
-      - invensense,icm20689
-      - invensense,icm20602
-      - invensense,icm20690
-      - invensense,mpu6000
-      - invensense,mpu6050
-      - invensense,mpu6500
-      - invensense,mpu6515
-      - invensense,mpu6880
-      - invensense,mpu9150
-      - invensense,mpu9250
-      - invensense,mpu9255
+    oneOf:
+      - enum:
+          - invensense,iam20680
+          - invensense,icm20608
+          - invensense,icm20609
+          - invensense,icm20689
+          - invensense,icm20602
+          - invensense,icm20690
+          - invensense,mpu6000
+          - invensense,mpu6050
+          - invensense,mpu6500
+          - invensense,mpu6515
+          - invensense,mpu6880
+          - invensense,mpu9150
+          - invensense,mpu9250
+          - invensense,mpu9255
+      - items:
+          - const: invensense,icm20608d
+          - const: invensense,icm20608
 
   reg:
     maxItems: 1
@@ -36,8 +40,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  spi-max-frequency: true
-
   vdd-supply: true
   vddio-supply: true
 
@@ -50,6 +52,7 @@ properties:
       These devices also support an auxiliary i2c bus via an i2c-gate.
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       not:
         properties:
@@ -63,7 +66,7 @@ allOf:
       properties:
         i2c-gate: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 required:
   - compatible
@@ -95,7 +98,7 @@ examples:
                 #address-cells = <1>;
                 #size-cells = <0>;
                 magnetometer@c {
-                    compatible = "ak,ak8975";
+                    compatible = "asahi-kasei,ak8975";
                     reg = <0x0c>;
                 };
             };
diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
index 479e7065d4eb..688100b240bc 100644
--- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale FXOS8700 Inertial Measurement Unit
 
 maintainers:
-  - Robert Jones <rjones@gateworks.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description: |
   Accelerometer and magnetometer combo device with an i2c and SPI interface.
@@ -36,45 +36,46 @@ properties:
   drive-open-drain:
     type: boolean
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
         fxos8700@1e {
-          compatible = "nxp,fxos8700";
-          reg = <0x1e>;
+            compatible = "nxp,fxos8700";
+            reg = <0x1e>;
 
-          interrupt-parent = <&gpio2>;
-          interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-          interrupt-names = "INT1";
+            interrupt-parent = <&gpio2>;
+            interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT1";
         };
     };
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
         fxos8700@0 {
-          compatible = "nxp,fxos8700";
-          reg = <0>;
+            compatible = "nxp,fxos8700";
+            reg = <0>;
 
-          spi-max-frequency = <1000000>;
-          interrupt-parent = <&gpio1>;
-          interrupts = <7 IRQ_TYPE_EDGE_RISING>;
-          interrupt-names = "INT2";
+            spi-max-frequency = <1000000>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "INT2";
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
index d9b3213318fb..b39f5217d8ff 100644
--- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
@@ -14,23 +14,41 @@ description:
 
 properties:
   compatible:
-    enum:
-      - st,lsm6ds3
-      - st,lsm6ds3h
-      - st,lsm6dsl
-      - st,lsm6dsm
-      - st,ism330dlc
-      - st,lsm6dso
-      - st,asm330lhh
-      - st,lsm6dsox
-      - st,lsm6dsr
-      - st,lsm6ds3tr-c
-      - st,ism330dhcx
-      - st,lsm9ds1-imu
-      - st,lsm6ds0
-      - st,lsm6dsrx
-      - st,lsm6dst
-      - st,lsm6dsop
+    oneOf:
+      - enum:
+          - st,lsm6ds3
+          - st,lsm6ds3h
+          - st,lsm6dsl
+          - st,lsm6dsm
+          - st,ism330dlc
+          - st,lsm6dso
+          - st,asm330lhh
+          - st,lsm6dsox
+          - st,lsm6dsr
+          - st,lsm6ds3tr-c
+          - st,ism330dhcx
+          - st,lsm9ds1-imu
+          - st,lsm6ds0
+          - st,lsm6dsrx
+          - st,lsm6dst
+          - st,lsm6dsop
+          - st,lsm6dsv
+          - st,lsm6dso16is
+      - items:
+          - const: st,asm330lhhx
+          - const: st,lsm6dsr
+      - items:
+          - const: st,lsm6dstx
+          - const: st,lsm6dst
+      - items:
+          - const: st,lsm6dsv16x
+          - const: st,lsm6dsv
+      - items:
+          - const: st,ism330is
+          - const: st,lsm6dso16is
+      - items:
+          - const: st,asm330lhb
+          - const: st,asm330lhh
 
   reg:
     maxItems: 1
@@ -41,8 +59,6 @@ properties:
     description:
       Supports up to 2 interrupt lines via the INT1 and INT2 pins.
 
-  spi-max-frequency: true
-
   vdd-supply:
     description: if defined provides VDD power to the sensor.
 
@@ -50,7 +66,7 @@ properties:
     description: if defined provides VDD IO power to the sensor.
 
   st,drdy-int-pin:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       The pin on the package that will be used to signal data ready
     enum:
@@ -61,6 +77,13 @@ properties:
     type: boolean
     description: enable/disable internal i2c controller pullup resistors.
 
+  st,disable-sensor-hub:
+    type: boolean
+    description:
+      Enable/disable internal i2c controller slave autoprobing at bootstrap.
+      Disable sensor-hub is useful if i2c controller clock/data lines are
+      connected through a pull-up with other chip lines (e.g. SDO/SA0).
+
   drive-open-drain:
     type: boolean
     description:
@@ -70,12 +93,15 @@ properties:
   wakeup-source:
     $ref: /schemas/types.yaml#/definitions/flag
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
new file mode 100644
index 000000000000..c8074f180a79
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltr501.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/liteon,ltr501.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteON LTR501 I2C Proximity and Light sensor
+
+maintainers:
+  - Nikita Travkin <nikita@trvn.ru>
+
+allOf:
+  - $ref: ../common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - liteon,ltr501
+      - liteon,ltr559
+      - liteon,ltr301
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  proximity-near-level: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@23 {
+            compatible = "liteon,ltr559";
+            reg = <0x23>;
+            proximity-near-level = <75>;
+
+            vdd-supply = <&pm8916_l17>;
+            vddio-supply = <&pm8916_l6>;
+
+            interrupt-parent = <&msmgpio>;
+            interrupts = <115 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
new file mode 100644
index 000000000000..7de1b0e721ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/liteon,ltrf216a.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LTRF216A Ambient Light Sensor
+
+maintainers:
+  - Shreeya Patel <shreeya.patel@collabora.com>
+
+description:
+  Ambient light sensing with an i2c interface.
+
+properties:
+  compatible:
+    const: liteon,ltrf216a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the sensor.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        light-sensor@53 {
+            compatible = "liteon,ltrf216a";
+            reg = <0x53>;
+            vdd-supply = <&vdd_regulator>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml
new file mode 100644
index 000000000000..30a109a1bf3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27034.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/rohm,bu27034.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BU27034 ambient light sensor
+
+maintainers:
+  - Matti Vaittinen <mazziesaccount@gmail.com>
+
+description: |
+  ROHM BU27034 is an ambient light sesnor with 3 channels and 3 photo diodes
+  capable of detecting a very wide range of illuminance. Typical application
+  is adjusting LCD and backlight power of TVs and mobile phones.
+  https://fscdn.rohm.com/en/products/databook/datasheet/ic/sensor/light/bu27034nuc-e.pdf
+
+properties:
+  compatible:
+    const: rohm,bu27034
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      light-sensor@38 {
+        compatible = "rohm,bu27034";
+        reg = <0x38>;
+        vdd-supply = <&vdd>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
index f92bf7b2b7f0..f6e22dc9814a 100644
--- a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
+++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
@@ -13,6 +13,9 @@ maintainers:
 description: |
   Ambient light and proximity sensor over an i2c interface.
 
+allOf:
+  - $ref: ../common.yaml#
+
 properties:
   compatible:
     enum:
@@ -26,6 +29,8 @@ properties:
   interrupts:
     maxItems: 1
 
+  proximity-near-level: true
+
 required:
   - compatible
   - reg
@@ -44,6 +49,7 @@ examples:
         stk3310@48 {
                 compatible = "sensortek,stk3310";
                 reg = <0x48>;
+                proximity-near-level = <25>;
                 interrupt-parent = <&gpio1>;
                 interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
         };
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
index a0a1ffe017df..9790f75fc669 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8975.yaml
@@ -17,11 +17,13 @@ properties:
           - asahi-kasei,ak8963
           - asahi-kasei,ak09911
           - asahi-kasei,ak09912
+          - asahi-kasei,ak09916
       - enum:
           - ak8975
           - ak8963
           - ak09911
           - ak09912
+          - ak09916
         deprecated: true
 
   reg:
@@ -43,6 +45,11 @@ properties:
       an optional regulator that needs to be on to provide VDD power to
       the sensor.
 
+  vid-supply:
+    description: |
+      an optional regulator that needs to be on to provide VID power to
+      the sensor.
+
   mount-matrix:
     description: an optional 3x3 mounting rotation matrix.
 
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
new file mode 100644
index 000000000000..121d540b7b6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/ti,tmag5273.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor
+
+maintainers:
+  - Gerald Loacker <gerald.loacker@wolfvision.net>
+
+description:
+  The TI TMAG5273 is a low-power linear 3D Hall-effect sensor. This device
+  integrates three independent Hall-effect sensors in the X, Y, and Z axes.
+  The device has an integrated temperature sensor available. The TMAG5273
+  can be configured through the I2C interface to enable any combination of
+  magnetic axes and temperature measurements. An integrated angle calculation
+  engine (CORDIC) provides full 360° angular position information for both
+  on-axis and off-axis angle measurement topologies. The angle calculation is
+  performed using two user-selected magnetic axes.
+
+properties:
+  compatible:
+    const: ti,tmag5273
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  ti,angle-measurement:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Enables angle measurement in the selected plane.
+      If not specified, "x-y" will be anables as default.
+    enum:
+      - off
+      - x-y
+      - y-z
+      - x-z
+
+  vcc-supply:
+    description:
+      A regulator providing 1.7 V to 3.6 V supply voltage on the VCC pin,
+      typically 3.3 V.
+
+  interrupts:
+    description:
+      The low active interrupt can be configured to be fixed width or latched.
+      Interrupt events can be configured to be generated from magnetic
+      thresholds or when a conversion is completed.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@35 {
+            compatible = "ti,tmag5273";
+            reg = <0x35>;
+            #io-channel-cells = <1>;
+            ti,angle-measurement = "x-z";
+            vcc-supply = <&vcc3v3>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
index 4b0ef1ef5445..877226e9219b 100644
--- a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml
@@ -91,12 +91,12 @@ examples:
         #size-cells = <0>;
 
         magnetometer@2e {
-          compatible = "yamaha,yas530";
-          reg = <0x2e>;
-          vdd-supply = <&ldo1_reg>;
-          iovdd-supply = <&ldo2_reg>;
-          reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
-          interrupts = <&gpio6 13 IRQ_TYPE_EDGE_RISING>;
+            compatible = "yamaha,yas530";
+            reg = <0x2e>;
+            vdd-supply = <&ldo1_reg>;
+            iovdd-supply = <&ldo2_reg>;
+            reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
+            interrupts = <13 IRQ_TYPE_EDGE_RISING>;
         };
     };
 
@@ -105,8 +105,8 @@ examples:
         #size-cells = <0>;
 
         magnetometer@2e {
-          compatible = "yamaha,yas539";
-          reg = <0x2e>;
-          vdd-supply = <&ldo1_reg>;
+            compatible = "yamaha,yas539";
+            reg = <0x2e>;
+            vdd-supply = <&ldo1_reg>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml
index 870b043406d8..c55831b60ee6 100644
--- a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml
+++ b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/multiplexer/io-channel-mux.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: I/O channel multiplexer bindings
+title: I/O channel multiplexer
 
 maintainers:
   - Peter Rosin <peda@axentia.se>
@@ -35,9 +35,18 @@ properties:
   mux-control-names: true
 
   channels:
-    $ref: /schemas/types.yaml#/definitions/string-array
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
     description:
-      List of strings, labeling the mux controller states.
+      List of strings, labeling the mux controller states. An empty
+      string for a state means that the channel is not available.
+
+  settle-time-us:
+    default: 0
+    description:
+      Time required for analog signals to settle after muxing.
+
+  "#io-channel-cells":
+    const: 1
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
index 0ebb6725a1af..b8d7083c97f8 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
@@ -44,7 +44,7 @@ examples:
 
         potentiometer@2f {
             compatible = "adi,ad5272-020";
-            reg = <0x2F>;
+            reg = <0x2f>;
             reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
         };
     };
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
index 567697d996ec..87e88f2a9908 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp41010.yaml
@@ -25,14 +25,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
index 945a2d644ddc..896fe0b5edcc 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/microchip,mcp4131.yaml
@@ -80,14 +80,15 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
@@ -95,7 +96,7 @@ examples:
         #size-cells = <0>;
 
         potentiometer@0 {
-            compatible = "mcp4131-502";
+            compatible = "microchip,mcp4131-502";
             reg = <0>;
             spi-max-frequency = <500000>;
         };
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
index be2be4b556db..9fb8d773efa3 100644
--- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: All Sensors DLH series low voltage digital pressure sensors
 
 maintainers:
-  - Tomislav Denis <tomislav.denis@avl.com>
+  - Jonathan Cameron <jic23@kernel.org>
 
 description: |
   Bindings for the All Sensors DLH series pressure sensors.
@@ -39,7 +39,7 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 49257f9251e8..6fda887ee9d4 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: BMP085/BMP180/BMP280/BME280 pressure iio sensors
+title: BMP085/BMP180/BMP280/BME280/BMP380 pressure iio sensors
 
 maintainers:
   - Andreas Klinger <ak@it-klinger.de>
@@ -16,6 +16,8 @@ description: |
     https://www.bosch-sensortec.com/bst/products/all_products/bmp180
     https://www.bosch-sensortec.com/bst/products/all_products/bmp280
     https://www.bosch-sensortec.com/bst/products/all_products/bme280
+    https://www.bosch-sensortec.com/bst/products/all_products/bmp380
+    https://www.bosch-sensortec.com/bst/products/all_products/bmp580
 
 properties:
   compatible:
@@ -24,6 +26,8 @@ properties:
       - bosch,bmp180
       - bosch,bmp280
       - bosch,bme280
+      - bosch,bmp380
+      - bosch,bmp580
 
   reg:
     maxItems: 1
@@ -58,16 +62,16 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      pressure@77 {
-          compatible = "bosch,bmp085";
-          reg = <0x77>;
-          interrupt-parent = <&gpio0>;
-          interrupts = <25 IRQ_TYPE_EDGE_RISING>;
-          reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
-          vddd-supply = <&foo>;
-          vdda-supply = <&bar>;
-      };
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pressure@77 {
+            compatible = "bosch,bmp085";
+            reg = <0x77>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+            vddd-supply = <&foo>;
+            vdda-supply = <&bar>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml b/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml
index 4f06707450bf..21e6ddb7f41e 100644
--- a/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/meas,ms5611.yaml
@@ -30,7 +30,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -52,6 +55,7 @@ examples:
             compatible = "meas,ms5611";
             reg = <0>;
             vdd-supply = <&ldo_3v3_gnss>;
+            spi-max-frequency = <20000000>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
index d6103be03460..c33640ddde58 100644
--- a/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
@@ -33,7 +33,10 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
index 7fcba5d6d508..c999994e19e3 100644
--- a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
@@ -49,7 +49,10 @@ required:
   - spi-cpha
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
@@ -57,7 +60,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-    lightning@0 {
+        lightning@0 {
             compatible = "ams,as3935";
             reg = <0>;
             spi-max-frequency = <400000>;
diff --git a/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml b/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
index 099b4be927d4..d4e09d2dcd21 100644
--- a/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-
 $id: http://devicetree.org/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
@@ -10,7 +9,6 @@ title: ChromeOS EC MKBP Proximity Sensor
 maintainers:
   - Stephen Boyd <swboyd@chromium.org>
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   Google's ChromeOS EC sometimes has the ability to detect user proximity.
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
new file mode 100644
index 000000000000..b3aa2ebf9661
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9324.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9324 capacitive proximity sensor
+
+maintainers:
+  - Gwendal Grignou <gwendal@chromium.org>
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9324 proximity sensor.
+
+properties:
+  compatible:
+    const: semtech,sx9324
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by device to announce preceding read request has finished
+      and data is available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,ph0-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Array of 3 entries. Index represent the id of the CS pin.
+      Value indicates how each CS pin is used during phase 0.
+      Each of the 3 pins have the following value -
+      0 : unused (high impedance)
+      1 : measured input
+      2 : dynamic shield
+      3 : grounded.
+      For instance, CS0 measured, CS1 shield and CS2 ground is [1, 2, 3]
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph1-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 1.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph2-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 2.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+  semtech,ph3-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Same as ph0-pin for phase 3.
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 3
+    maxItems: 3
+
+
+  semtech,ph01-resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For phase 0 and 1.
+      Higher the number, higher the resolution.
+    default: 128
+
+  semtech,ph23-resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For phase 2 and 3
+    default: 128
+
+  semtech,startup-sensor:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description: |
+      Phase used for start-up proximity detection.
+      It is used when we enable a phase to remove static offset and measure
+      only capacitance changes introduced by the user.
+
+  semtech,ph01-proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      PROXRAW filter strength for phase 0 and 1. A value of 0 represents off,
+      and other values represent 1-1/2^N.
+
+  semtech,ph23-proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      Same as proxraw-strength01, for phase 2 and 3.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description: |
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+  semtech,cs-idle-sleep:
+    description:
+      State of CS pins during sleep mode and idle time.
+    enum:
+      - hi-z
+      - gnd
+      - vdd
+
+  semtech,int-comp-resistor:
+    description:
+      Internal resistor setting for compensation.
+    enum:
+      - lowest
+      - low
+      - high
+      - highest
+
+  semtech,input-precharge-resistor-ohms:
+    default: 4000
+    multipleOf: 2000
+    minimum: 0
+    maximum: 30000
+    description:
+      Pre-charge input resistance in Ohm.
+
+  semtech,input-analog-gain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 3
+    description: |
+      Defines the input antenna analog gain
+      0: x1.247
+      1: x1 (default)
+      2: x0.768
+      3: x0.552
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9324";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,ph0-pin = <1 2 3>;
+        semtech,ph1-pin = <3 2 1>;
+        semtech,ph2-pin = <1 2 3>;
+        semtech,ph3-pin = <3 2 1>;
+        semtech,ph01-resolution = <256>;
+        semtech,ph23-resolution = <256>;
+        semtech,startup-sensor = <1>;
+        semtech,ph01-proxraw-strength = <2>;
+        semtech,ph23-proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
+        semtech,int-comp-resistor = "lowest";
+        semtech,input-precharge-resistor-ohms = <2000>;
+        semtech,cs-idle-sleep = "gnd";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
new file mode 100644
index 000000000000..ad0bb44f41b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9360 capacitive proximity sensor
+
+maintainers:
+  - Gwendal Grignou <gwendal@chromium.org>
+  - Daniel Campello <campello@chromium.org>
+
+description: |
+  Semtech's SX9360 proximity sensor.
+
+properties:
+  compatible:
+    const: semtech,sx9360
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description:
+      Generated by device to announce preceding read request has finished
+      and data is available or that a close/far proximity event has happened.
+    maxItems: 1
+
+  vdd-supply:
+    description: Main power supply
+
+  svdd-supply:
+    description: Host interface power supply
+
+  "#io-channel-cells":
+    const: 1
+
+  semtech,resolution:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
+    description:
+      Capacitance measurement resolution. For both phases, "reference" and
+      "measurement". Higher the number, higher the resolution.
+    default: 128
+
+  semtech,proxraw-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    default: 1
+    description:
+      PROXRAW filter strength for both phases. A value of 0 represents off,
+      and other values represent 1-1/2^N.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description: |
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
+  semtech,input-precharge-resistor-ohms:
+    default: 0
+    multipleOf: 2000
+    minimum: 0
+    maximum: 30000
+    description:
+      Pre-charge input resistance in Ohm.
+
+required:
+  - compatible
+  - reg
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      proximity@28 {
+        compatible = "semtech,sx9360";
+        reg = <0x28>;
+        interrupt-parent = <&pio>;
+        interrupts = <5 IRQ_TYPE_LEVEL_LOW 5>;
+        vdd-supply = <&pp3300_a>;
+        svdd-supply = <&pp1800_prox>;
+        #io-channel-cells = <1>;
+        semtech,resolution = <256>;
+        semtech,proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
+        semtech,input-precharge-resistor-ohms = <4000>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml b/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
index 656460d9d8c8..322befc41de6 100644
--- a/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
@@ -19,6 +19,11 @@ properties:
   interrupts:
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
+  vdd-supply: true
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml
index 81e4bdfc17c4..b24e5a202a48 100644
--- a/Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml
+++ b/Documentation/devicetree/bindings/iio/resolver/adi,ad2s90.yaml
@@ -33,8 +33,6 @@ properties:
 
   spi-cpha: true
 
-additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -43,6 +41,11 @@ dependencies:
   spi-cpol: [ spi-cpha ]
   spi-cpha: [ spi-cpol ]
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
index a88b3b14d6bd..dd2ae2bd1ad7 100644
--- a/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
+++ b/Documentation/devicetree/bindings/iio/samsung,sensorhub-rinato.yaml
@@ -40,10 +40,6 @@ properties:
     description:
       Reset the sensorhub.
 
-  spi-max-frequency: true
-
-additionalProperties: false
-
 required:
   - compatible
   - reg
@@ -52,6 +48,11 @@ required:
   - mcu-ap-gpios
   - mcu-reset-gpios
 
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
 examples:
   - |
     spi {
diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
index 71de5631ebae..1ff3afca9149 100644
--- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
+++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
@@ -11,9 +11,6 @@ description: The STMicroelectronics sensor devices are pretty straight-forward
   what type of sensor it is.
   Note that whilst this covers many STMicro MEMs sensors, some more complex
   IMUs need their own bindings.
-  The STMicroelectronics sensor devices are pretty straight-forward I2C or
-  SPI devices, all sharing the same device tree descriptions no matter what
-  type of sensor it is.
 
 maintainers:
   - Denis Ciocca <denis.ciocca@st.com>
@@ -29,6 +26,7 @@ properties:
           - st,lis2dw12
           - st,lis2hh12
           - st,lis2dh12-accel
+          - st,lis302dl
           - st,lis331dl-accel
           - st,lis331dlh-accel
           - st,lis3de
@@ -38,6 +36,7 @@ properties:
           - st,lis3lv02dl-accel
           - st,lng2dm-accel
           - st,lsm303agr-accel
+          - st,lsm303c-accel
           - st,lsm303dl-accel
           - st,lsm303dlh-accel
           - st,lsm303dlhc-accel
@@ -46,6 +45,12 @@ properties:
           - st,lsm330d-accel
           - st,lsm330dl-accel
           - st,lsm330dlc-accel
+      - items:
+          - const: st,iis328dq
+          - const: st,h3lis331dl-accel
+      - description: Silan Accelerometers
+        enum:
+          - silan,sc7a20
       - description: STMicroelectronics Gyroscopes
         enum:
           - st,l3g4200d-gyro
@@ -62,6 +67,7 @@ properties:
           - st,lis2mdl
           - st,lis3mdl-magn
           - st,lsm303agr-magn
+          - st,lsm303c-magn
           - st,lsm303dlh-magn
           - st,lsm303dlhc-magn
           - st,lsm303dlm-magn
@@ -69,6 +75,7 @@ properties:
       - description: STMicroelectronics Pressure Sensors
         enum:
           - st,lps001wp-press
+          - st,lps22df
           - st,lps22hb-press
           - st,lps22hh
           - st,lps25h-press
@@ -137,6 +144,7 @@ allOf:
             - st,lis2mdl
             - st,lis3l02dq
             - st,lis3lv02dl-accel
+            - st,lps22df
             - st,lps22hb-press
             - st,lps22hh
             - st,lps25h-press
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index 0f79d9a01c49..dbb85135fd66 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -4,19 +4,52 @@
 $id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices LTC2983 Multi-sensor Temperature system
+title: Analog Devices LTC2983, LTC2986, LTM2985 Multi-sensor Temperature system
 
 maintainers:
   - Nuno Sá <nuno.sa@analog.com>
 
 description: |
-  Analog Devices LTC2983 Multi-Sensor Digital Temperature Measurement System
+  Analog Devices LTC2983, LTC2984, LTC2986, LTM2985 Multi-Sensor Digital
+  Temperature Measurement Systems
+
   https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/2984fb.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/29861fa.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltm2985.pdf
+
+$defs:
+  sensor-node:
+    type: object
+    description: Sensor node common constraints
+
+    properties:
+      reg:
+        description:
+          Channel number. Connects the sensor to the channel with this number
+          of the device.
+        minimum: 1
+        maximum: 20
+
+      adi,sensor-type:
+        description: Type of sensor connected to the device.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - reg
+      - adi,sensor-type
+
 
 properties:
   compatible:
-    enum:
-      - adi,ltc2983
+    oneOf:
+      - enum:
+          - adi,ltc2983
+          - adi,ltc2986
+          - adi,ltm2985
+      - items:
+          - const: adi,ltc2984
+          - const: adi,ltc2983
 
   reg:
     maxItems: 1
@@ -25,26 +58,26 @@ properties:
     maxItems: 1
 
   adi,mux-delay-config-us:
-    description:
-      The LTC2983 performs 2 or 3 internal conversion cycles per temperature
-      result. Each conversion cycle is performed with different excitation and
-      input multiplexer configurations. Prior to each conversion, these
-      excitation circuits and input switch configurations are changed and an
-      internal 1ms delay ensures settling prior to the conversion cycle in most
-      cases. An extra delay can be configured using this property. The value is
-      rounded to nearest 100us.
+    description: |
+      Extra delay prior to each conversion, in addition to the internal 1ms
+      delay, for the multiplexer to switch input configurations and
+      excitation values.
+
+      This property is supposed to be in microseconds, but to maintain
+      compatibility, this value will be multiplied by 100 before usage.
     maximum: 255
+    default: 0
 
   adi,filter-notch-freq:
     description:
-      Set's the default setting of the digital filter. The default is
-      simultaneous 50/60Hz rejection.
+      Notch frequency of the digital filter.
       0 - 50/60Hz rejection
       1 - 60Hz rejection
       2 - 50Hz rejection
     $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 2
+    default: 0
 
   '#address-cells':
     const: 1
@@ -53,30 +86,11 @@ properties:
     const: 0
 
 patternProperties:
-  "@([1-9]|1[0-9]|20)$":
-    type: object
-
-    properties:
-      reg:
-        description:
-          The channel number. It can be connected to one of the 20 channels of
-          the device.
-        minimum: 1
-        maximum: 20
-
-      adi,sensor-type:
-        description: Identifies the type of sensor connected to the device.
-        $ref: /schemas/types.yaml#/definitions/uint32
-
-    required:
-      - reg
-      - adi,sensor-type
-
   "^thermocouple@":
-    type: object
-    description:
-      Represents a thermocouple sensor which is connected to one of the device
-      channels.
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+
+    description: Thermocouple sensor.
 
     properties:
       adi,sensor-type:
@@ -95,86 +109,90 @@ patternProperties:
         maximum: 9
 
       adi,single-ended:
-        description:
-          Boolean property which set's the thermocouple as single-ended.
+        description: Whether the sensor is single-ended.
         type: boolean
 
       adi,sensor-oc-current-microamp:
-        description:
-          This property set's the pulsed current value applied during
-          open-circuit detect.
+        description: Pulsed current value applied during open-circuit detect.
         enum: [10, 100, 500, 1000]
+        default: 10
 
       adi,cold-junction-handle:
         description:
-          Phandle which points to a sensor object responsible for measuring
-          the thermocouple cold junction temperature.
-        $ref: "/schemas/types.yaml#/definitions/phandle"
+          Sensor responsible for measuring the thermocouple cold junction
+          temperature.
+        $ref: /schemas/types.yaml#/definitions/phandle
 
       adi,custom-thermocouple:
         description:
-          This is a table, where each entry should be a pair of
-          voltage(mv)-temperature(K). The entries must be given in nv and uK
-          so that, the original values must be multiplied by 1000000. For
-          more details look at table 69 and 70.
-          Note should be signed, but dtc doesn't currently maintain the
-          sign.
-        $ref: /schemas/types.yaml#/definitions/uint64-matrix
+          Used for digitizing custom thermocouples.
+          See Page 59 of the datasheet.
+        $ref: /schemas/types.yaml#/definitions/int64-matrix
         minItems: 3
         maxItems: 64
         items:
-          minItems: 2
-          maxItems: 2
+          items:
+            - description: Voltage point in nV, signed.
+            - description: Temperature point in uK.
+
+    allOf:
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 9
+        then:
+          required:
+            - adi,custom-thermocouple
 
   "^diode@":
-    type: object
-    description:
-      Represents a diode sensor which is connected to one of the device
-      channels.
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+
+    description: Diode sensor.
 
     properties:
       adi,sensor-type:
-        description: Identifies the sensor as a diode.
+        description: Sensor type for diodes.
         $ref: /schemas/types.yaml#/definitions/uint32
         const: 28
 
       adi,single-ended:
-        description: Boolean property which set's the diode as single-ended.
+        description: Whether the sensor is single-ended.
         type: boolean
 
       adi,three-conversion-cycles:
         description:
-          Boolean property which set's three conversion cycles removing
-          parasitic resistance effects between the LTC2983 and the diode.
+          Whether to use three conversion cycles to remove parasitic
+          resistance between the device and the diode.
         type: boolean
 
       adi,average-on:
         description:
-          Boolean property which enables a running average of the diode
-          temperature reading. This reduces the noise when the diode is used
-          as a cold junction temperature element on an isothermal block
-          where temperatures change slowly.
+          Whether to use a running average of the diode temperature
+          reading to reduce the noise when the diode is used as a cold
+          junction temperature element on an isothermal block where
+          temperatures change slowly.
         type: boolean
 
       adi,excitation-current-microamp:
         description:
-          This property controls the magnitude of the excitation current
-          applied to the diode. Depending on the number of conversions
-          cycles, this property will assume different predefined values on
-          each cycle. Just set the value of the first cycle (1l).
+          Magnitude of the 1l excitation current applied to the diode.
+          4l excitation current will be 4 times this value, and 8l
+          excitation current will be 8 times value.
         enum: [10, 20, 40, 80]
+        default: 10
 
       adi,ideal-factor-value:
         description:
-          This property sets the diode ideality factor. The real value must
-          be multiplied by 1000000 to remove the fractional part. For more
-          information look at table 20 of the datasheet.
+          Diode ideality factor.
+          Set this property to 1000000 times the real value.
         $ref: /schemas/types.yaml#/definitions/uint32
+        default: 0
 
   "^rtd@":
-    type: object
-    description:
-      Represents a rtd sensor which is connected to one of the device channels.
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+    description: RTD sensor.
 
     properties:
       reg:
@@ -197,68 +215,83 @@ patternProperties:
         maximum: 18
 
       adi,rsense-handle:
-        description:
-          Phandle pointing to a rsense object associated with this RTD.
-        $ref: "/schemas/types.yaml#/definitions/phandle"
+        description: Associated sense resistor sensor.
+        $ref: /schemas/types.yaml#/definitions/phandle
 
       adi,number-of-wires:
         description:
-          Identifies the number of wires used by the RTD. Setting this
-          property to 5 means 4 wires with Kelvin Rsense.
+          Number of wires used by the RTD.
+          5 means 4 wires with Kelvin sense resistor.
         $ref: /schemas/types.yaml#/definitions/uint32
         enum: [2, 3, 4, 5]
+        default: 2
 
       adi,rsense-share:
         description:
-          Boolean property which enables Rsense sharing, where one sense
-          resistor is used for multiple 2-, 3-, and/or 4-wire RTDs.
-        type: boolean
-
-      adi,current-rotate:
-        description:
-          Boolean property which enables excitation current rotation to
-          automatically remove parasitic thermocouple effects. Note that
-          this property is not allowed for 2- and 3-wire RTDs.
+          Whether to enable sense resistor sharing, where one sense
+          resistor is used by multiple sensors.
         type: boolean
 
       adi,excitation-current-microamp:
-        description:
-          This property controls the magnitude of the excitation current
-          applied to the RTD.
+        description: Excitation current applied to the RTD.
         enum: [5, 10, 25, 50, 100, 250, 500, 1000]
+        default: 5
 
       adi,rtd-curve:
-        description:
-          This property set the RTD curve used and the corresponding
-          Callendar-VanDusen constants. Look at table 30 of the datasheet.
+        description: |
+          RTD curve and the corresponding Callendar-VanDusen constants.
+          0 - European
+          1 - American
+          2 - Japanese
+          3 - ITS-90
         $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3
+        default: 0
 
       adi,custom-rtd:
         description:
-          This is a table, where each entry should be a pair of
-          resistance(ohm)-temperature(K). The entries added here are in uohm
-          and uK. For more details values look at table 74 and 75.
+          Used for digitizing custom RTDs.
+          See Page 62 of the datasheet.
         $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        minItems: 3
+        maxItems: 64
         items:
-          minItems: 3
-          maxItems: 64
           items:
-            minItems: 2
-            maxItems: 2
+            - description: Resistance point in uOhms.
+            - description: Temperature point in uK.
 
     required:
       - adi,rsense-handle
 
-    dependencies:
-      adi,current-rotate: [ "adi,rsense-share" ]
+    allOf:
+      - if:
+          properties:
+            adi,number-of-wires:
+              const: 4
+        then:
+          properties:
+            adi,current-rotate:
+              description:
+                Whether to enable excitation current rotation to automatically
+                remove parasitic thermocouple effects.
+              type: boolean
+
+          dependencies:
+            adi,current-rotate: [ "adi,rsense-share" ]
+
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 18
+        then:
+          required:
+            - adi,custom-rtd
 
   "^thermistor@":
-    type: object
-    description:
-      Represents a thermistor sensor which is connected to one of the device
-      channels.
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+    description: Thermistor sensor.
 
     properties:
       adi,sensor-type:
@@ -277,61 +310,53 @@ patternProperties:
         maximum: 27
 
       adi,rsense-handle:
-        description:
-          Phandle pointing to a rsense object associated with this
-          thermistor.
-        $ref: "/schemas/types.yaml#/definitions/phandle"
+        description: Associated sense resistor sensor.
+        $ref: /schemas/types.yaml#/definitions/phandle
 
       adi,single-ended:
-        description:
-          Boolean property which set's the thermistor as single-ended.
+        description: Whether the sensor is single-ended.
         type: boolean
 
       adi,rsense-share:
         description:
-          Boolean property which enables Rsense sharing, where one sense
-          resistor is used for multiple thermistors. Note that this property
-          is ignored if adi,single-ended is set.
+          Whether to enable sense resistor sharing, where one sense
+          resistor is used by multiple sensors.
         type: boolean
 
       adi,current-rotate:
         description:
-          Boolean property which enables excitation current rotation to
-          automatically remove parasitic thermocouple effects.
+          Whether to enable excitation current rotation to automatically
+          remove parasitic thermocouple effects.
         type: boolean
 
       adi,excitation-current-nanoamp:
         description:
-          This property controls the magnitude of the excitation current
-          applied to the thermistor. Value 0 set's the sensor in auto-range
-          mode.
-        $ref: /schemas/types.yaml#/definitions/uint32
+          Excitation current applied to the thermistor.
+          0 sets the sensor in auto-range mode.
         enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
                500000, 1000000]
+        default: 0
 
       adi,custom-thermistor:
         description:
-          This is a table, where each entry should be a pair of
-          resistance(ohm)-temperature(K). The entries added here are in uohm
-          and uK only for custom thermistors. For more details look at table
-          78 and 79.
+          Used for digitizing custom thermistors.
+          See Page 65 of the datasheet.
         $ref: /schemas/types.yaml#/definitions/uint64-matrix
         minItems: 3
         maxItems: 64
         items:
-          minItems: 2
-          maxItems: 2
+          items:
+            - description: Resistance point in uOhms.
+            - description: Temperature point in uK.
 
       adi,custom-steinhart:
         description:
-          Steinhart-Hart coefficients are also supported and can
-          be programmed into the device memory using this property. For
-          Steinhart sensors the coefficients are given in the raw
-          format. Look at table 82 for more information.
+          Steinhart-Hart coefficients in raw format, used for digitizing
+          custom thermistors.
+          See Page 68 of the datasheet.
         $ref: /schemas/types.yaml#/definitions/uint32-array
-        items:
-          minItems: 6
-          maxItems: 6
+        minItems: 6
+        maxItems: 6
 
     required:
       - adi,rsense-handle
@@ -339,25 +364,81 @@ patternProperties:
     dependencies:
       adi,current-rotate: [ "adi,rsense-share" ]
 
+    allOf:
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 26
+        then:
+          properties:
+            adi,excitation-current-nanoamp:
+              enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
+                     250000, 500000, 1000000]
+              default: 1000
+          required:
+            - adi,custom-steinhart
+      - if:
+          properties:
+            adi,sensor-type:
+              const: 27
+        then:
+          properties:
+            adi,excitation-current-nanoamp:
+              enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000,
+                     250000, 500000, 1000000]
+              default: 1000
+          required:
+            - adi,custom-thermistor
+
   "^adc@":
-    type: object
-    description: Represents a channel which is being used as a direct adc.
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+    description: Direct ADC sensor.
 
     properties:
       adi,sensor-type:
-        description: Identifies the sensor as a direct adc.
+        description: Sensor type for direct ADC sensors.
         $ref: /schemas/types.yaml#/definitions/uint32
         const: 30
 
       adi,single-ended:
-        description: Boolean property which set's the adc as single-ended.
+        description: Whether the sensor is single-ended.
         type: boolean
 
+  "^temp@":
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+    description: Active analog temperature sensor.
+
+    properties:
+      adi,sensor-type:
+        description: Sensor type for active analog temperature sensors.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        const: 31
+
+      adi,single-ended:
+        description: Whether the sensor is single-ended.
+        type: boolean
+
+      adi,custom-temp:
+        description:
+          Used for digitizing active analog temperature sensors.
+          See Page 67 of the LTM2985 datasheet.
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        minItems: 3
+        maxItems: 64
+        items:
+          items:
+            - description: Voltage point in nV, signed.
+            - description: Temperature point in uK.
+
+    required:
+      - adi,custom-temp
+
   "^rsense@":
-    type: object
-    description:
-      Represents a rsense which is connected to one of the device channels.
-      Rsense are used by thermistors and RTD's.
+    $ref: '#/$defs/sensor-node'
+    unevaluatedProperties: false
+    description: Sense resistor sensor.
 
     properties:
       reg:
@@ -365,14 +446,12 @@ patternProperties:
         maximum: 20
 
       adi,sensor-type:
-        description: Identifies the sensor as a rsense.
+        description: Sensor type sense resistor sensors.
         $ref: /schemas/types.yaml#/definitions/uint32
         const: 29
 
       adi,rsense-val-milli-ohms:
-        description:
-          Sets the value of the sense resistor. Look at table 20 of the
-          datasheet for information.
+        description: Value of the sense resistor.
 
     required:
       - adi,rsense-val-milli-ohms
@@ -384,6 +463,18 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - adi,ltc2983
+              - adi,ltc2984
+    then:
+      patternProperties:
+        "^temp@": false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
@@ -391,76 +482,75 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        sensor_ltc2983: ltc2983@0 {
-                compatible = "adi,ltc2983";
-                reg = <0>;
-
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                interrupts = <20 IRQ_TYPE_EDGE_RISING>;
-                interrupt-parent = <&gpio>;
-
-                thermocouple@18 {
-                        reg = <18>;
-                        adi,sensor-type = <8>; //Type B
-                        adi,sensor-oc-current-microamp = <10>;
-                        adi,cold-junction-handle = <&diode5>;
-                };
-
-                diode5: diode@5 {
-                        reg = <5>;
-                        adi,sensor-type = <28>;
-                };
-
-                rsense2: rsense@2 {
-                        reg = <2>;
-                        adi,sensor-type = <29>;
-                        adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms
-                };
-
-                rtd@14 {
-                        reg = <14>;
-                        adi,sensor-type = <15>; //PT1000
-                        /*2-wire, internal gnd, no current rotation*/
-                        adi,number-of-wires = <2>;
-                        adi,rsense-share;
-                        adi,excitation-current-microamp = <500>;
-                        adi,rsense-handle = <&rsense2>;
-                };
-
-                adc@10 {
-                        reg = <10>;
-                        adi,sensor-type = <30>;
-                        adi,single-ended;
-                };
-
-                thermistor@12 {
-                        reg = <12>;
-                        adi,sensor-type = <26>; //Steinhart
-                        adi,rsense-handle = <&rsense2>;
-                        adi,custom-steinhart = <0x00F371EC 0x12345678
-                                        0x2C0F8733 0x10018C66 0xA0FEACCD
-                                        0x90021D99>; //6 entries
-                };
-
-                thermocouple@20 {
-                        reg = <20>;
-                        adi,sensor-type = <9>; //custom thermocouple
-                        adi,single-ended;
-                        adi,custom-thermocouple = /bits/ 64
-                                 <(-50220000) 0>,
-                                 <(-30200000) 99100000>,
-                                 <(-5300000) 135400000>,
-                                 <0 273150000>,
-                                 <40200000 361200000>,
-                                 <55300000 522100000>,
-                                 <88300000 720300000>,
-                                 <132200000 811200000>,
-                                 <188700000 922500000>,
-                                 <460400000 1000000000>; //10 pairs
-               };
-
+        temperature-sensor@0 {
+            compatible = "adi,ltc2983";
+            reg = <0>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+            interrupt-parent = <&gpio>;
+
+            thermocouple@18 {
+                reg = <18>;
+                adi,sensor-type = <8>; //Type B
+                adi,sensor-oc-current-microamp = <10>;
+                adi,cold-junction-handle = <&diode5>;
+            };
+
+            diode5: diode@5 {
+                reg = <5>;
+                adi,sensor-type = <28>;
+            };
+
+            rsense2: rsense@2 {
+                reg = <2>;
+                adi,sensor-type = <29>;
+                adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms
+            };
+
+            rtd@14 {
+                reg = <14>;
+                adi,sensor-type = <15>; //PT1000
+                /*2-wire, internal gnd, no current rotation*/
+                adi,number-of-wires = <2>;
+                adi,rsense-share;
+                adi,excitation-current-microamp = <500>;
+                adi,rsense-handle = <&rsense2>;
+            };
+
+            adc@10 {
+                reg = <10>;
+                adi,sensor-type = <30>;
+                adi,single-ended;
+            };
+
+            thermistor@12 {
+                reg = <12>;
+                adi,sensor-type = <26>; //Steinhart
+                adi,rsense-handle = <&rsense2>;
+                adi,custom-steinhart = <0x00f371ec 0x12345678
+                                0x2c0f8733 0x10018c66 0xa0feaccd
+                                0x90021d99>; //6 entries
+            };
+
+            thermocouple@20 {
+                reg = <20>;
+                adi,sensor-type = <9>; //custom thermocouple
+                adi,single-ended;
+                adi,custom-thermocouple =
+                         /bits/ 64 <(-50220000) 0>,
+                         /bits/ 64 <(-30200000) 99100000>,
+                         /bits/ 64 <(-5300000) 135400000>,
+                         /bits/ 64 <0 273150000>,
+                         /bits/ 64 <40200000 361200000>,
+                         /bits/ 64 <55300000 522100000>,
+                         /bits/ 64 <88300000 720300000>,
+                         /bits/ 64 <132200000 811200000>,
+                         /bits/ 64 <188700000 922500000>,
+                         /bits/ 64 <460400000 1000000000>; //10 pairs
+            };
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
index 9969bac66aa1..0805ed7e2113 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31855k.yaml
@@ -32,7 +32,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
   spi-cpha: true
 
 required:
@@ -40,6 +39,7 @@ required:
   - reg
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
   - if:
       properties:
         compatible:
@@ -53,7 +53,7 @@ allOf:
       properties:
         spi-cpha: false
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
index 873b34766676..228a94165487 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31856.yaml
@@ -19,7 +19,6 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
   spi-cpha: true
 
   thermocouple-type:
@@ -34,7 +33,10 @@ required:
   - reg
   - spi-cpha
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
new file mode 100644
index 000000000000..7cc365e0ebc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/temperature/maxim,max31865.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX31865 Resistance Temperature Detector.
+
+maintainers:
+  - Navin Sankar Velliangiri <navin@linumiz.com>
+
+description: |
+  https://datasheets.maximintegrated.com/en/ds/MAX31865.pdf
+
+properties:
+  compatible:
+    const: maxim,max31865
+
+  reg:
+    maxItems: 1
+
+  maxim,3-wire:
+    description:
+      Identifies the number of wires used by the RTD. Setting this property
+      enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection.
+    type: boolean
+
+  spi-cpha: true
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       temperature-sensor@0 {
+           compatible = "maxim,max31865";
+           reg = <0>;
+           spi-max-frequency = <400000>;
+           spi-cpha;
+           maxim,3-wire;
+       };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
index b547ddcd544a..4a55e7f25ae7 100644
--- a/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/melexis,mlx90632.yaml
@@ -35,6 +35,9 @@ properties:
     maxItems: 1
     description: Default is 0x3a, but can be reprogrammed.
 
+  vdd-supply:
+    description: provide VDD power to the sensor.
+
 required:
   - compatible
   - reg
@@ -50,6 +53,7 @@ examples:
         temp-sensor@3a {
             compatible = "melexis,mlx90632";
             reg = <0x3a>;
+            vdd-supply = <&ldo4_reg>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
index 347bc16a4671..8c6d7735e875 100644
--- a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
@@ -1,15 +1,16 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/temperature/ti,tmp117.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/temperature/ti,tmp117.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: "TI TMP117 - Digital temperature sensor with integrated NV memory"
+title: TI TMP117 - Digital temperature sensor with integrated NV memory
 
 description: |
-    TI TMP117 - Digital temperature sensor with integrated NV memory that supports
-    I2C interface.
-      https://www.ti.com/lit/gpn/tmp1
+    TI TMP116/117 - Digital temperature sensor with integrated NV memory that
+    supports I2C interface.
+      https://www.ti.com/lit/gpn/tmp116
+      https://www.ti.com/lit/gpn/tmp117
 
 maintainers:
   - Puranjay Mohan <puranjay12@gmail.com>
@@ -17,6 +18,7 @@ maintainers:
 properties:
   compatible:
     enum:
+      - ti,tmp116
       - ti,tmp117
 
   reg:
diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml
index 721878d5b7af..6c244d66f8ce 100644
--- a/Documentation/devicetree/bindings/input/adc-joystick.yaml
+++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019-2020 Artur Rojek
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/input/adc-joystick.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/input/adc-joystick.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: ADC attached joystick
 
@@ -14,6 +14,9 @@ description: >
   Bindings for joystick devices connected to ADC controllers supporting
   the Industrial I/O subsystem.
 
+allOf:
+  - $ref: input.yaml#
+
 properties:
   compatible:
     const: adc-joystick
@@ -28,6 +31,8 @@ properties:
       https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
       for details.
 
+  poll-interval: true
+
   '#address-cells':
     const: 1
 
@@ -45,6 +50,7 @@ additionalProperties: false
 patternProperties:
   "^axis@[0-9a-f]+$":
     type: object
+    $ref: input.yaml#
     description: >
       Represents a joystick axis bound to the given ADC channel.
       For each entry in the io-channels list, one axis subnode with a matching
@@ -57,15 +63,13 @@ patternProperties:
         description: Index of an io-channels list entry bound to this axis.
 
       linux,code:
-        $ref: /schemas/types.yaml#/definitions/uint32
         description: EV_ABS specific event code generated by the axis.
 
       abs-range:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32-array
-          - items:
-              - description: minimum value
-              - description: maximum value
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        items:
+          - description: minimum value
+          - description: maximum value
         description: >
           Minimum and maximum values produced by the axis.
           For an ABS_X axis this will be the left-most and right-most
diff --git a/Documentation/devicetree/bindings/input/adc-keys.txt b/Documentation/devicetree/bindings/input/adc-keys.txt
deleted file mode 100644
index 6c8be6a9ace2..000000000000
--- a/Documentation/devicetree/bindings/input/adc-keys.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-ADC attached resistor ladder buttons
-------------------------------------
-
-Required properties:
- - compatible: "adc-keys"
- - io-channels: Phandle to an ADC channel
- - io-channel-names = "buttons";
- - keyup-threshold-microvolt: Voltage above or equal to which all the keys are
-			      considered up.
-
-Optional properties:
-	- poll-interval: Poll interval time in milliseconds
-	- autorepeat: Boolean, Enable auto repeat feature of Linux input
-	  subsystem.
-
-Each button (key) is represented as a sub-node of "adc-keys":
-
-Required subnode-properties:
-	- label: Descriptive name of the key.
-	- linux,code: Keycode to emit.
-	- press-threshold-microvolt: voltage above or equal to which this key is
-				     considered pressed.
-
-No two values of press-threshold-microvolt may be the same.
-All values of press-threshold-microvolt must be less than
-keyup-threshold-microvolt.
-
-Example:
-
-#include <dt-bindings/input/input.h>
-
-	adc-keys {
-		compatible = "adc-keys";
-		io-channels = <&lradc 0>;
-		io-channel-names = "buttons";
-		keyup-threshold-microvolt = <2000000>;
-
-		button-up {
-			label = "Volume Up";
-			linux,code = <KEY_VOLUMEUP>;
-			press-threshold-microvolt = <1500000>;
-		};
-
-		button-down {
-			label = "Volume Down";
-			linux,code = <KEY_VOLUMEDOWN>;
-			press-threshold-microvolt = <1000000>;
-		};
-
-		button-enter {
-			label = "Enter";
-			linux,code = <KEY_ENTER>;
-			press-threshold-microvolt = <500000>;
-		};
-	};
-
-+--------------------------------+------------------------+
-| 2.000.000 <= value             | no key pressed         |
-+--------------------------------+------------------------+
-| 1.500.000 <= value < 2.000.000 | KEY_VOLUMEUP pressed   |
-+--------------------------------+------------------------+
-| 1.000.000 <= value < 1.500.000 | KEY_VOLUMEDOWN pressed |
-+--------------------------------+------------------------+
-|   500.000 <= value < 1.000.000 | KEY_ENTER pressed      |
-+--------------------------------+------------------------+
-|              value <   500.000 | no key pressed         |
-+--------------------------------+------------------------+
diff --git a/Documentation/devicetree/bindings/input/adc-keys.yaml b/Documentation/devicetree/bindings/input/adc-keys.yaml
new file mode 100644
index 000000000000..7aa078dead37
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adc-keys.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adc-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADC attached resistor ladder buttons
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: adc-keys
+
+  io-channels:
+    maxItems: 1
+
+  io-channel-names:
+    const: buttons
+
+  keyup-threshold-microvolt:
+    description:
+      Voltage above or equal to which all the keys are considered up.
+
+  poll-interval: true
+  autorepeat: true
+
+patternProperties:
+  '^button-':
+    type: object
+    $ref: input.yaml#
+    additionalProperties: false
+    description:
+      Each button (key) is represented as a sub-node.
+
+    properties:
+      label: true
+
+      linux,code: true
+
+      press-threshold-microvolt:
+        description:
+          Voltage above or equal to which this key is considered pressed. No
+          two values of press-threshold-microvolt may be the same. All values
+          of press-threshold-microvolt must be less than
+          keyup-threshold-microvolt.
+
+    required:
+      - linux,code
+      - press-threshold-microvolt
+
+required:
+  - compatible
+  - io-channels
+  - io-channel-names
+  - keyup-threshold-microvolt
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    // +--------------------------------+------------------------+
+    // | 2.000.000 <= value             | no key pressed         |
+    // +--------------------------------+------------------------+
+    // | 1.500.000 <= value < 2.000.000 | KEY_VOLUMEUP pressed   |
+    // +--------------------------------+------------------------+
+    // | 1.000.000 <= value < 1.500.000 | KEY_VOLUMEDOWN pressed |
+    // +--------------------------------+------------------------+
+    // |   500.000 <= value < 1.000.000 | KEY_ENTER pressed      |
+    // +--------------------------------+------------------------+
+    // |              value <   500.000 | no key pressed         |
+    // +--------------------------------+------------------------+
+
+    adc-keys {
+        compatible = "adc-keys";
+        io-channels = <&lradc 0>;
+        io-channel-names = "buttons";
+        keyup-threshold-microvolt = <2000000>;
+
+        button-up {
+            label = "Volume Up";
+            linux,code = <KEY_VOLUMEUP>;
+            press-threshold-microvolt = <1500000>;
+        };
+
+        button-down {
+            label = "Volume Down";
+            linux,code = <KEY_VOLUMEDOWN>;
+            press-threshold-microvolt = <1000000>;
+        };
+
+        button-enter {
+            label = "Enter";
+            linux,code = <KEY_ENTER>;
+            press-threshold-microvolt = <500000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
new file mode 100644
index 000000000000..26ea66834ae2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adi,adp5588.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP5588 Keypad Controller
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices Mobile I/O Expander and QWERTY Keypad Controller
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADP5588.pdf
+
+allOf:
+  - $ref: matrix-keymap.yaml#
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,adp5587
+      - adi,adp5588
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Supply Voltage Input
+
+  reset-gpios:
+    description:
+      If specified, it will be asserted during driver probe. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller:
+    description:
+      This property applies if either keypad,num-rows lower than 8 or
+      keypad,num-columns lower than 10.
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller:
+    description:
+      This property applies if either keypad,num-rows lower than 8 or
+      keypad,num-columns lower than 10.
+
+  '#interrupt-cells':
+    const: 2
+
+  adi,unlock-keys:
+    description:
+      Specifies a maximum of 2 keys that can be used to unlock the keypad.
+      If this property is set, the keyboard will be locked and only unlocked
+      after these keys are pressed. If only one key is set, a double click is
+      needed to unlock the keypad. The value of this property cannot be bigger
+      or equal than keypad,num-rows * keypad,num-columns.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - keypad,num-rows
+  - keypad,num-columns
+  - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        keys@34 {
+            compatible = "adi,adp5588";
+            reg = <0x34>;
+
+            vcc-supply = <&vcc>;
+            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+
+            keypad,num-rows = <1>;
+            keypad,num-columns = <9>;
+            linux,keymap = <
+                MATRIX_KEY(0x00, 0x00, KEY_1)
+                MATRIX_KEY(0x00, 0x01, KEY_2)
+                MATRIX_KEY(0x00, 0x02, KEY_3)
+                MATRIX_KEY(0x00, 0x03, KEY_4)
+                MATRIX_KEY(0x00, 0x04, KEY_5)
+                MATRIX_KEY(0x00, 0x05, KEY_6)
+                MATRIX_KEY(0x00, 0x06, KEY_7)
+                MATRIX_KEY(0x00, 0x07, KEY_8)
+                MATRIX_KEY(0x00, 0x08, KEY_9)
+            >;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
index d74f2002409e..5efceb313879 100644
--- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
+++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/allwinner,sun4i-a10-lradc-keys.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 LRADC Device Tree Bindings
+title: Allwinner A10 LRADC
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -16,12 +16,24 @@ properties:
       - const: allwinner,sun4i-a10-lradc-keys
       - const: allwinner,sun8i-a83t-r-lradc
       - items:
-          - const: allwinner,sun50i-a64-lradc
+          - enum:
+              - allwinner,suniv-f1c100s-lradc
+              - allwinner,sun50i-a64-lradc
           - const: allwinner,sun8i-a83t-r-lradc
+      - const: allwinner,sun50i-r329-lradc
+      - items:
+          - const: allwinner,sun20i-d1-lradc
+          - const: allwinner,sun50i-r329-lradc
 
   reg:
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
   interrupts:
     maxItems: 1
 
@@ -34,14 +46,13 @@ properties:
 patternProperties:
   "^button-[0-9]+$":
     type: object
+    $ref: input.yaml#
     properties:
       label:
         $ref: /schemas/types.yaml#/definitions/string
         description: Descriptive name of the key
 
-      linux,code:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Keycode to emit
+      linux,code: true
 
       channel:
         $ref: /schemas/types.yaml#/definitions/uint32
@@ -68,6 +79,18 @@ required:
   - interrupts
   - vref-supply
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun50i-r329-lradc
+
+then:
+  required:
+    - clocks
+    - resets
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
index b4ad829d7383..442f623bb294 100644
--- a/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
+++ b/Documentation/devicetree/bindings/input/ariel-pwrbutton.yaml
@@ -17,6 +17,7 @@ description: |
 
 allOf:
   - $ref: input.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
new file mode 100644
index 000000000000..9ddba7f2e7aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/azoteq,iqs7222.yaml
@@ -0,0 +1,950 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/azoteq,iqs7222.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Azoteq IQS7222A/B/C Capacitive Touch Controller
+
+maintainers:
+  - Jeff LaBundy <jeff@labundy.com>
+
+description: |
+  The Azoteq IQS7222A, IQS7222B and IQS7222C are multichannel capacitive touch
+  controllers that feature additional sensing capabilities.
+
+  Link to datasheets: https://www.azoteq.com/
+
+properties:
+  compatible:
+    enum:
+      - azoteq,iqs7222a
+      - azoteq,iqs7222b
+      - azoteq,iqs7222c
+
+  reg:
+    maxItems: 1
+
+  irq-gpios:
+    maxItems: 1
+    description:
+      Specifies the GPIO connected to the device's active-low RDY output.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Specifies the GPIO connected to the device's active-low MCLR input. The
+      device is temporarily held in hardware reset prior to initialization if
+      this property is present.
+
+  azoteq,max-counts:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Specifies the maximum number of conversion periods (counts) that can be
+      reported as follows:
+      0: 1023
+      1: 2047
+      2: 4095
+      3: 16384
+
+  azoteq,auto-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: |
+      Specifies the number of conversions to occur before an interrupt is
+      generated as follows:
+      0: 4
+      1: 8
+      2: 16
+      3: 32
+
+  azoteq,ati-frac-div-fine:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: Specifies the preloaded ATI fine fractional divider.
+
+  azoteq,ati-frac-div-coarse:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 31
+    description: Specifies the preloaded ATI coarse fractional divider.
+
+  azoteq,ati-comp-select:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 1023
+    description: Specifies the preloaded ATI compensation selection.
+
+  azoteq,lta-beta-lp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter damping factor to be applied during
+      low-power mode.
+
+  azoteq,lta-beta-np:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter damping factor to be applied during
+      normal-power mode.
+
+  azoteq,counts-beta-lp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the counts filter damping factor to be applied during low-power
+      mode.
+
+  azoteq,counts-beta-np:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the counts filter damping factor to be applied during normal-
+      power mode.
+
+  azoteq,lta-fast-beta-lp:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter fast damping factor to be applied
+      during low-power mode.
+
+  azoteq,lta-fast-beta-np:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 15
+    description:
+      Specifies the long-term average filter fast damping factor to be applied
+      during normal-power mode.
+
+  azoteq,timeout-ati-ms:
+    multipleOf: 500
+    minimum: 0
+    maximum: 32767500
+    description:
+      Specifies the delay (in ms) before ATI is retried following an ATI error.
+
+  azoteq,rate-ati-ms:
+    minimum: 0
+    maximum: 65535
+    description: Specifies the rate (in ms) at which ATI status is evaluated.
+
+  azoteq,timeout-np-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from normal-power mode to low-power mode.
+
+  azoteq,rate-np-ms:
+    minimum: 0
+    maximum: 3000
+    description: Specifies the report rate (in ms) during normal-power mode.
+
+  azoteq,timeout-lp-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the length of time (in ms) to wait for an event before moving
+      from low-power mode to ultra-low-power mode.
+
+  azoteq,rate-lp-ms:
+    minimum: 0
+    maximum: 3000
+    description: Specifies the report rate (in ms) during low-power mode.
+
+  azoteq,timeout-ulp-ms:
+    minimum: 0
+    maximum: 65535
+    description:
+      Specifies the rate (in ms) at which channels not regularly sampled during
+      ultra-low-power mode are updated.
+
+  azoteq,rate-ulp-ms:
+    minimum: 0
+    maximum: 3000
+    description: Specifies the report rate (in ms) during ultra-low-power mode.
+
+patternProperties:
+  "^cycle-[0-9]$":
+    type: object
+    description: Represents a conversion cycle serving two sensing channels.
+
+    properties:
+      azoteq,conv-period:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the cycle's conversion period.
+
+      azoteq,conv-frac:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the cycle's conversion frequency fraction.
+
+      azoteq,tx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 9
+        items:
+          minimum: 0
+          maximum: 8
+        description: Specifies the CTx pin(s) associated with the cycle.
+
+      azoteq,rx-float-inactive:
+        type: boolean
+        description: Floats any inactive CRx pins instead of grounding them.
+
+      azoteq,dead-time-enable:
+        type: boolean
+        description:
+          Increases the denominator of the conversion frequency formula by one.
+
+      azoteq,tx-freq-fosc:
+        type: boolean
+        description:
+          Fixes the conversion frequency to that of the device's core clock.
+
+      azoteq,vbias-enable:
+        type: boolean
+        description: Enables the bias voltage for use during inductive sensing.
+
+      azoteq,sense-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the cycle's sensing mode as follows:
+          0: None
+          1: Self capacitive
+          2: Mutual capacitive
+          3: Inductive
+
+          Note that in the case of IQS7222A, cycles 5 and 6 are restricted to
+          Hall-effect sensing.
+
+      azoteq,iref-enable:
+        type: boolean
+        description:
+          Enables the current reference for use during various sensing modes.
+
+      azoteq,iref-level:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the cycle's current reference level.
+
+      azoteq,iref-trim:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the cycle's current reference trim.
+
+    dependencies:
+      azoteq,iref-level: ["azoteq,iref-enable"]
+      azoteq,iref-trim: ["azoteq,iref-enable"]
+
+    additionalProperties: false
+
+  "^channel-([0-9]|1[0-9])$":
+    type: object
+    description:
+      Represents a single sensing channel. A channel is active if defined and
+      inactive otherwise.
+
+      Note that in the case of IQS7222A, channels 10 and 11 are restricted to
+      Hall-effect sensing with events reported on channel 10 only.
+
+    properties:
+      azoteq,ulp-allow:
+        type: boolean
+        description:
+          Permits the device to enter ultra-low-power mode while the channel
+          lies in a state of touch or proximity.
+
+      azoteq,ref-select:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 9
+        description: Specifies a separate reference channel to be followed.
+
+      azoteq,ref-weight:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description: Specifies the relative weight of the reference channel.
+
+      azoteq,use-prox:
+        type: boolean
+        description:
+          Activates the reference channel in response to proximity events
+          instead of touch events.
+
+      azoteq,ati-band:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the channel's ATI band as a fraction of its ATI target as
+          follows:
+          0: 1/16
+          1: 1/8
+          2: 1/4
+          3: 1/2
+
+      azoteq,global-halt:
+        type: boolean
+        description:
+          Specifies that the channel's long-term average is to freeze if any
+          other participating channel lies in a proximity or touch state.
+
+      azoteq,invert-enable:
+        type: boolean
+        description:
+          Inverts the polarity of the states reported for proximity and touch
+          events relative to their respective thresholds.
+
+      azoteq,dual-direction:
+        type: boolean
+        description:
+          Specifies that the channel's long-term average is to freeze in the
+          presence of either increasing or decreasing counts, thereby permit-
+          ting events to be reported in either direction.
+
+      azoteq,rx-enable:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        items:
+          minimum: 0
+          maximum: 7
+        description: Specifies the CRx pin(s) associated with the channel.
+
+      azoteq,samp-cap-double:
+        type: boolean
+        description: Doubles the sampling capacitance from 40 pF to 80 pF.
+
+      azoteq,vref-half:
+        type: boolean
+        description: Halves the discharge threshold from 1.0 V to 0.5 V.
+
+      azoteq,proj-bias:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3]
+        description: |
+          Specifies the bias current applied during mutual (projected)
+          capacitive sensing as follows:
+          0: 2 uA
+          1: 5 uA
+          2: 7 uA
+          3: 10 uA
+
+      azoteq,ati-target:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 8
+        minimum: 0
+        maximum: 2040
+        description: Specifies the channel's ATI target.
+
+      azoteq,ati-base:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        multipleOf: 16
+        minimum: 0
+        maximum: 496
+        description: Specifies the channel's ATI base.
+
+      azoteq,ati-mode:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2, 3, 4, 5]
+        description: |
+          Specifies the channel's ATI mode as follows:
+          0: Disabled
+          1: Compensation
+          2: Compensation divider
+          3: Fine fractional divider
+          4: Coarse fractional divider
+          5: Full
+
+      azoteq,ati-frac-div-fine:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the channel's ATI fine fractional divider.
+
+      azoteq,ati-frac-mult-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the channel's ATI coarse fractional multiplier.
+
+      azoteq,ati-frac-div-coarse:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the channel's ATI coarse fractional divider.
+
+      azoteq,ati-comp-div:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 31
+        description: Specifies the channel's ATI compensation divider.
+
+      azoteq,ati-comp-select:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 1023
+        description: Specifies the channel's ATI compensation selection.
+
+      azoteq,debounce-enter:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the channel's debounce entrance factor.
+
+      azoteq,debounce-exit:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 15
+        description: Specifies the channel's debounce exit factor.
+
+    patternProperties:
+      "^event-(prox|touch)$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a proximity or touch event reported by the channel.
+
+        properties:
+          azoteq,gpio-select:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 1
+            maxItems: 3
+            items:
+              minimum: 0
+              maximum: 2
+            description: |
+              Specifies one or more GPIO mapped to the event as follows:
+              0: GPIO0
+              1: GPIO3 (IQS7222C only)
+              2: GPIO4 (IQS7222C only)
+
+              Note that although multiple events can be mapped to a single
+              GPIO, they must all be of the same type (proximity, touch or
+              slider gesture).
+
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              Specifies the threshold for the event. Valid entries range from
+              0-127 and 0-255 for proximity and touch events, respectively.
+
+          azoteq,hyst:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            description:
+              Specifies the hysteresis for the event (touch events only).
+
+          azoteq,timeout-press-ms:
+            multipleOf: 500
+            minimum: 0
+            maximum: 127500
+            description:
+              Specifies the length of time (in ms) to wait before automatically
+              releasing a press event. Specify zero to allow the press state to
+              persist indefinitely.
+
+              The IQS7222B does not feature channel-specific timeouts; the time-
+              out specified for any one channel applies to all channels.
+
+          linux,code: true
+
+          linux,input-type:
+            enum: [1, 5]
+            default: 1
+            description:
+              Specifies whether the event is to be interpreted as a key (1)
+              or a switch (5).
+
+        additionalProperties: false
+
+    dependencies:
+      azoteq,ref-weight: ["azoteq,ref-select"]
+      azoteq,use-prox: ["azoteq,ref-select"]
+
+    additionalProperties: false
+
+  "^slider-[0-1]$":
+    type: object
+    description: Represents a slider comprising three or four channels.
+
+    properties:
+      azoteq,channel-select:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 3
+        maxItems: 4
+        items:
+          minimum: 0
+          maximum: 9
+        description:
+          Specifies the order of the channels that participate in the slider.
+
+      azoteq,slider-size:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 65535
+        description:
+          Specifies the slider's one-dimensional resolution, equal to the
+          maximum coordinate plus one.
+
+      azoteq,lower-cal:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the slider's lower starting point.
+
+      azoteq,upper-cal:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description: Specifies the slider's upper starting point.
+
+      azoteq,top-speed:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 65535
+        description:
+          Specifies the speed of movement after which coordinate filtering is
+          no longer applied.
+
+      azoteq,bottom-speed:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+        description:
+          Specifies the speed of movement after which coordinate filtering is
+          linearly reduced.
+
+      azoteq,bottom-beta:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 7
+        description:
+          Specifies the coordinate filter damping factor to be applied
+          while the speed of movement is below that which is specified
+          by azoteq,bottom-speed.
+
+      azoteq,static-beta:
+        type: boolean
+        description:
+          Applies the coordinate filter damping factor specified by
+          azoteq,bottom-beta regardless of the speed of movement.
+
+      azoteq,use-prox:
+        type: boolean
+        description:
+          Directs the slider to respond to the proximity states of the selected
+          channels instead of their corresponding touch states. Note the slider
+          cannot report granular coordinates during a state of proximity.
+
+      linux,axis:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          Specifies the absolute axis to which coordinates are mapped. Specify
+          ABS_WHEEL to operate the slider as a wheel (IQS7222C only).
+
+    patternProperties:
+      "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+        type: object
+        $ref: input.yaml#
+        description:
+          Represents a press or gesture (IQS7222A only) event reported by
+          the slider.
+
+        properties:
+          linux,code: true
+
+          azoteq,gesture-max-ms:
+            multipleOf: 16
+            minimum: 0
+            maximum: 4080
+            description:
+              Specifies the length of time (in ms) within which a tap, swipe
+              or flick gesture must be completed in order to be acknowledged
+              by the device. The number specified for any one swipe or flick
+              gesture applies to all remaining swipe or flick gestures.
+
+          azoteq,gesture-min-ms:
+            multipleOf: 16
+            minimum: 0
+            maximum: 496
+            description:
+              Specifies the length of time (in ms) for which a tap gesture must
+              be held in order to be acknowledged by the device.
+
+          azoteq,gesture-dist:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            multipleOf: 16
+            minimum: 0
+            maximum: 4080
+            description:
+              Specifies the distance across which a swipe or flick gesture must
+              travel in order to be acknowledged by the device. The number spec-
+              ified for any one swipe or flick gesture applies to all remaining
+              swipe or flick gestures.
+
+          azoteq,gpio-select:
+            $ref: /schemas/types.yaml#/definitions/uint32-array
+            minItems: 1
+            maxItems: 3
+            items:
+              minimum: 0
+              maximum: 2
+            description: |
+              Specifies one or more GPIO mapped to the event as follows:
+              0: GPIO0
+              1: GPIO3 (IQS7222C only)
+              2: GPIO4 (IQS7222C only)
+
+              Note that although multiple events can be mapped to a single
+              GPIO, they must all be of the same type (proximity, touch or
+              slider gesture).
+
+        additionalProperties: false
+
+    required:
+      - azoteq,channel-select
+
+    additionalProperties: false
+
+  "^gpio-[0-2]$":
+    type: object
+    description: |
+      Represents a GPIO mapped to one or more events as follows:
+      gpio-0: GPIO0
+      gpio-1: GPIO3 (IQS7222C only)
+      gpio-2: GPIO4 (IQS7222C only)
+
+    allOf:
+      - $ref: ../pinctrl/pincfg-node.yaml#
+
+    properties:
+      drive-open-drain: true
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: azoteq,iqs7222b
+
+    then:
+      patternProperties:
+        "^cycle-[0-9]$":
+          properties:
+            azoteq,iref-enable: false
+
+        "^channel-([0-9]|1[0-9])$":
+          properties:
+            azoteq,ref-select: false
+
+          patternProperties:
+            "^event-(prox|touch)$":
+              properties:
+                azoteq,gpio-select: false
+
+        "^slider-[0-1]$": false
+
+        "^gpio-[0-2]$": false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: azoteq,iqs7222a
+
+    then:
+      patternProperties:
+        "^channel-([0-9]|1[0-9])$":
+          patternProperties:
+            "^event-(prox|touch)$":
+              properties:
+                azoteq,gpio-select:
+                  maxItems: 1
+                  items:
+                    maximum: 0
+
+        "^slider-[0-1]$":
+          properties:
+            azoteq,slider-size:
+              multipleOf: 16
+              minimum: 16
+              maximum: 4080
+
+            azoteq,top-speed:
+              multipleOf: 4
+              maximum: 1020
+
+          patternProperties:
+            "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+              properties:
+                azoteq,gpio-select:
+                  maxItems: 1
+                  items:
+                    maximum: 0
+
+    else:
+      patternProperties:
+        "^channel-([0-9]|1[0-9])$":
+          properties:
+            azoteq,ulp-allow: false
+
+        "^slider-[0-1]$":
+          patternProperties:
+            "^event-(press|tap|(swipe|flick)-(pos|neg))$":
+              properties:
+                azoteq,gesture-max-ms: false
+
+                azoteq,gesture-min-ms: false
+
+                azoteq,gesture-dist: false
+
+required:
+  - compatible
+  - reg
+  - irq-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/input.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            iqs7222a@44 {
+                    compatible = "azoteq,iqs7222a";
+                    reg = <0x44>;
+                    irq-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+                    azoteq,lta-beta-lp = <7>;
+                    azoteq,lta-beta-np = <8>;
+                    azoteq,counts-beta-lp = <2>;
+                    azoteq,counts-beta-np = <3>;
+                    azoteq,lta-fast-beta-lp = <3>;
+                    azoteq,lta-fast-beta-np = <4>;
+
+                    cycle-0 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <1>, <2>, <4>, <5>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-1 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <5>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-2 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <4>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-3 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <2>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-4 {
+                            azoteq,conv-period = <5>;
+                            azoteq,conv-frac = <127>;
+                            azoteq,tx-enable = <1>;
+                            azoteq,dead-time-enable;
+                            azoteq,sense-mode = <2>;
+                    };
+
+                    cycle-5 {
+                            azoteq,conv-period = <2>;
+                            azoteq,conv-frac = <0>;
+                    };
+
+                    cycle-6 {
+                            azoteq,conv-period = <2>;
+                            azoteq,conv-frac = <0>;
+                    };
+
+                    channel-0 {
+                            azoteq,ulp-allow;
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <800>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-1 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-2 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-3 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-4 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <3>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <208>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-5 {
+                            azoteq,ulp-allow;
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <800>;
+                            azoteq,ati-base = <144>;
+                            azoteq,ati-mode = <5>;
+                    };
+
+                    channel-6 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_MUTE>;
+                            };
+                    };
+
+                    channel-7 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_VOLUMEDOWN>;
+                            };
+                    };
+
+                    channel-8 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_VOLUMEUP>;
+                            };
+                    };
+
+                    channel-9 {
+                            azoteq,global-halt;
+                            azoteq,invert-enable;
+                            azoteq,rx-enable = <6>;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <160>;
+                            azoteq,ati-mode = <5>;
+
+                            event-touch {
+                                    linux,code = <KEY_POWER>;
+                            };
+                    };
+
+                    channel-10 {
+                            azoteq,ulp-allow;
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <112>;
+
+                            event-touch {
+                                    linux,code = <SW_LID>;
+                                    linux,input-type = <EV_SW>;
+                            };
+                    };
+
+                    channel-11 {
+                            azoteq,ati-target = <496>;
+                            azoteq,ati-base = <112>;
+                    };
+
+                    slider-0 {
+                            azoteq,channel-select = <1>, <2>, <3>, <4>;
+                            azoteq,slider-size = <4080>;
+                            azoteq,upper-cal = <50>;
+                            azoteq,lower-cal = <30>;
+                            azoteq,top-speed = <200>;
+                            azoteq,bottom-speed = <1>;
+                            azoteq,bottom-beta = <3>;
+
+                            event-tap {
+                                    linux,code = <KEY_PLAYPAUSE>;
+                                    azoteq,gesture-max-ms = <400>;
+                                    azoteq,gesture-min-ms = <32>;
+                            };
+
+                            event-flick-pos {
+                                    linux,code = <KEY_NEXTSONG>;
+                                    azoteq,gesture-max-ms = <800>;
+                                    azoteq,gesture-dist = <800>;
+                            };
+
+                            event-flick-neg {
+                                    linux,code = <KEY_PREVIOUSSONG>;
+                            };
+                    };
+            };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/cap11xx.txt b/Documentation/devicetree/bindings/input/cap11xx.txt
deleted file mode 100644
index 8c67a0b5058d..000000000000
--- a/Documentation/devicetree/bindings/input/cap11xx.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Device tree bindings for Microchip CAP11xx based capacitive touch sensors
-
-The node for this device must be a child of a I2C controller node, as the
-device communication via I2C only.
-
-Required properties:
-
-	compatible:		Must contain one of:
-					"microchip,cap1106"
-					"microchip,cap1126"
-					"microchip,cap1188"
-
-	reg:			The I2C slave address of the device.
-
-	interrupts:		Property describing the interrupt line the
-				device's ALERT#/CM_IRQ# pin is connected to.
-				The device only has one interrupt source.
-
-Optional properties:
-
-	autorepeat:		Enables the Linux input system's autorepeat
-				feature on the input device.
-
-	microchip,sensor-gain:	Defines the gain of the sensor circuitry. This
-				effectively controls the sensitivity, as a
-				smaller delta capacitance is required to
-				generate the same delta count values.
-				Valid values are 1, 2, 4, and 8.
-				By default, a gain of 1 is set.
-
-	microchip,irq-active-high:	By default the interrupt pin is active low
-				open drain. This property allows using the active
-				high push-pull output.
-
-	linux,keycodes:		Specifies an array of numeric keycode values to
-				be used for the channels. If this property is
-				omitted, KEY_A, KEY_B, etc are used as
-				defaults. The array must have exactly six
-				entries.
-
-Example:
-
-i2c_controller {
-	cap1106@28 {
-		compatible = "microchip,cap1106";
-		interrupt-parent = <&gpio1>;
-		interrupts = <0 0>;
-		reg = <0x28>;
-		autorepeat;
-		microchip,sensor-gain = <2>;
-
-		linux,keycodes = <103>,		/* KEY_UP */
-				 <106>,		/* KEY_RIGHT */
-				 <108>,		/* KEY_DOWN */
-				 <105>,		/* KEY_LEFT */
-				 <109>,		/* KEY_PAGEDOWN */
-				 <104>;		/* KEY_PAGEUP */
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usr@0 {
-			label = "cap11xx:green:usr0";
-			reg = <0>;
-		};
-
-		usr@1 {
-			label = "cap11xx:green:usr1";
-			reg = <1>;
-		};
-
-		alive@2 {
-			label = "cap11xx:green:alive";
-			reg = <2>;
-			linux,default_trigger = "heartbeat";
-		};
-	};
-}
diff --git a/Documentation/devicetree/bindings/input/cypress-sf.yaml b/Documentation/devicetree/bindings/input/cypress-sf.yaml
new file mode 100644
index 000000000000..c0b051466272
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress-sf.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cypress-sf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress StreetFighter touchkey controller
+
+maintainers:
+  - Yassine Oudjana <y.oudjana@protonmail.com>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    const: cypress,sf3155
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  avdd-supply:
+    description: Regulator for AVDD analog voltage
+
+  vdd-supply:
+    description: Regulator for VDD digital voltage
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - avdd-supply
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchkey@28 {
+                compatible = "cypress,sf3155";
+                reg = <0x28>;
+                interrupt-parent = <&msmgpio>;
+                interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
+                avdd-supply = <&vreg_l6a_1p8>;
+                vdd-supply = <&vdd_3v2_tp>;
+                linux,keycodes = <KEY_BACK KEY_MENU>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/da9062-onkey.txt b/Documentation/devicetree/bindings/input/da9062-onkey.txt
index 5f9fbc68e58a..e5eef59a93dc 100644
--- a/Documentation/devicetree/bindings/input/da9062-onkey.txt
+++ b/Documentation/devicetree/bindings/input/da9062-onkey.txt
@@ -2,7 +2,7 @@
 
 This module is part of the DA9061/DA9062/DA9063. For more details about entire
 DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
-For DA9063 see Documentation/devicetree/bindings/mfd/da9063.txt
+For DA9063 see Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
 
 This module provides the KEY_POWER event.
 
diff --git a/Documentation/devicetree/bindings/input/elan,ekth3000.yaml b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml
new file mode 100644
index 000000000000..2a9bb6ace021
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/elan,ekth3000.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/elan,ekth3000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elantech I2C Touchpad
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    const: elan,ekth3000
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source:
+    type: boolean
+    description: touchpad can be used as a wakeup source
+
+  vcc-supply:
+    description: a phandle for the regulator supplying 3.3V power
+
+  elan,trackpoint:
+    type: boolean
+    description: touchpad can support a trackpoint
+
+  elan,clickpad:
+    type: boolean
+    description: touchpad is a clickpad (the entire surface is a button)
+
+  elan,middle-button:
+    type: boolean
+    description: touchpad has a physical middle button
+
+  elan,x_traces:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: number of antennas on the x axis
+
+  elan,y_traces:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: number of antennas on the y axis
+
+  touchscreen-size-x: true
+
+  touchscreen-size-y: true
+
+  touchscreen-x-mm: true
+
+  touchscreen-y-mm: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchpad@15 {
+            compatible = "elan,ekth3000";
+            reg = <0x15>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
+            wakeup-source;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
new file mode 100644
index 000000000000..05e6f2df604c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/elan,ekth6915.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Elan eKTH6915 touchscreen controller
+
+maintainers:
+  - Douglas Anderson <dianders@chromium.org>
+
+description:
+  Supports the Elan eKTH6915 touchscreen controller.
+  This touchscreen controller uses the i2c-hid protocol with a reset GPIO.
+
+properties:
+  compatible:
+    items:
+      - const: elan,ekth6915
+
+  reg:
+    const: 0x10
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: Reset GPIO; not all touchscreens using eKTH6915 hook this up.
+
+  vcc33-supply:
+    description: The 3.3V supply to the touchscreen.
+
+  vccio-supply:
+    description:
+      The IO supply to the touchscreen. Need not be specified if this is the
+      same as the 3.3V supply.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vcc33-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ap_ts: touchscreen@10 {
+        compatible = "elan,ekth6915";
+        reg = <0x10>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+
+        reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+        vcc33-supply = <&pp3300_ts>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/elan_i2c.txt b/Documentation/devicetree/bindings/input/elan_i2c.txt
deleted file mode 100644
index 9963247706f2..000000000000
--- a/Documentation/devicetree/bindings/input/elan_i2c.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Elantech I2C Touchpad
-
-Required properties:
-- compatible: must be "elan,ekth3000".
-- reg: I2C address of the chip.
-- interrupts: interrupt to which the chip is connected (see interrupt
-  binding[0]).
-
-Optional properties:
-- wakeup-source: touchpad can be used as a wakeup source.
-- pinctrl-names: should be "default" (see pinctrl binding [1]).
-- pinctrl-0: a phandle pointing to the pin settings for the device (see
-  pinctrl binding [1]).
-- vcc-supply: a phandle for the regulator supplying 3.3V power.
-- elan,trackpoint: touchpad can support a trackpoint (boolean)
-- elan,clickpad: touchpad is a clickpad (the entire surface is a button)
-- elan,middle-button: touchpad has a physical middle button
-- elan,x_traces: number of antennas on the x axis
-- elan,y_traces: number of antennas on the y axis
-- some generic touchscreen properties [2]:
-  * touchscreen-size-x
-  * touchscreen-size-y
-  * touchscreen-x-mm
-  * touchscreen-y-mm
-
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
-
-Example:
-	&i2c1 {
-		/* ... */
-
-		touchpad@15 {
-			compatible = "elan,ekth3000";
-			reg = <0x15>;
-			interrupt-parent = <&gpio4>;
-			interrupts = <0x0 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
index 878464f128dc..5139af287d3e 100644
--- a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
+++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
@@ -57,7 +57,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        mpr121@5a {
+        touchkey@5a {
             compatible = "fsl,mpr121-touchkey";
             reg = <0x5a>;
             interrupt-parent = <&gpio1>;
@@ -77,7 +77,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        mpr121@5a {
+        touchkey@5a {
             compatible = "fsl,mpr121-touchkey";
             reg = <0x5a>;
             poll-interval = <20>;
diff --git a/Documentation/devicetree/bindings/input/fsl,scu-key.yaml b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml
new file mode 100644
index 000000000000..e5a3c355ee1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/fsl,scu-key.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/fsl,scu-key.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - SCU Key Based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: fsl,imx8qxp-sc-key
+      - const: fsl,imx-sc-key
+
+  linux,keycodes:
+    maxItems: 1
+
+required:
+  - compatible
+  - linux,keycodes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+
+    keys {
+        compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
+        linux,keycodes = <KEY_POWER>;
+    };
diff --git a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
index fe1c5016f7f3..ce18d7dadae2 100644
--- a/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
+++ b/Documentation/devicetree/bindings/input/goodix,gt7375p.yaml
@@ -16,8 +16,11 @@ description:
 
 properties:
   compatible:
-    items:
+    oneOf:
       - const: goodix,gt7375p
+      - items:
+          - const: goodix,gt7986u
+          - const: goodix,gt7375p
 
   reg:
     enum:
@@ -33,6 +36,13 @@ properties:
   vdd-supply:
     description: The 3.3V supply to the touchscreen.
 
+  mainboard-vddio-supply:
+    description:
+      The supply on the main board needed to power up IO signals going
+      to the touchscreen. This supply need not go to the touchscreen
+      itself as long as it allows the main board to make signals compatible
+      with what the touchscreen is expecting for its IO rails.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
index 5377b232fa10..fefaaf46a240 100644
--- a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
+++ b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
@@ -10,20 +10,21 @@ title: ChromeOS EC Keyboard
 maintainers:
   - Simon Glass <sjg@chromium.org>
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 description: |
   Google's ChromeOS EC Keyboard is a simple matrix keyboard
   implemented on a separate EC (Embedded Controller) device. It provides
   a message for reading key scans from the EC. These are then converted
-  into keycodes for processing by the kernel.
-
-allOf:
-  - $ref: "/schemas/input/matrix-keymap.yaml#"
+  into keycodes for processing by the kernel. This device also supports
+  switches/buttons like power and volume buttons.
 
 properties:
   compatible:
-    const: google,cros-ec-keyb
+    oneOf:
+      - description: ChromeOS EC with only buttons/switches
+        const: google,cros-ec-keyb-switches
+      - description: ChromeOS EC with keyboard and possibly buttons/switches
+        const: google,cros-ec-keyb
 
   google,needs-ghost-filter:
     description:
@@ -32,6 +33,7 @@ properties:
     type: boolean
 
   function-row-physmap:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     maxItems: 15
     description: |
@@ -42,15 +44,31 @@ properties:
       where the lower 16 bits are reserved. This property is specified only
       when the keyboard has a custom design for the top row keys.
 
+dependencies:
+  function-row-physmap: [ 'linux,keymap' ]
+  google,needs-ghost-filter: [ 'linux,keymap' ]
+
 required:
   - compatible
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: google,cros-ec-keyb
+then:
+  $ref: /schemas/input/matrix-keymap.yaml#
+  required:
+    - keypad,num-rows
+    - keypad,num-columns
+    - linux,keymap
+
 unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/input/input.h>
-    cros-ec-keyb {
+    keyboard-controller {
         compatible = "google,cros-ec-keyb";
         keypad,num-rows = <8>;
         keypad,num-columns = <13>;
@@ -114,3 +132,9 @@ examples:
             /* UP      LEFT    */
             0x070b0067 0x070c0069>;
     };
+  - |
+    /* No matrix keyboard, just buttons/switches */
+    keyboard-controller {
+        compatible = "google,cros-ec-keyb-switches";
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/gpio-beeper.txt b/Documentation/devicetree/bindings/input/gpio-beeper.txt
deleted file mode 100644
index a5086e37fce6..000000000000
--- a/Documentation/devicetree/bindings/input/gpio-beeper.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* GPIO beeper device tree bindings
-
-Register a beeper connected to GPIO pin.
-
-Required properties:
-- compatible:	Should be "gpio-beeper".
-- gpios:	From common gpio binding; gpio connection to beeper enable pin.
-
-Example:
-	beeper: beeper {
-		compatible = "gpio-beeper";
-		gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/input/gpio-beeper.yaml b/Documentation/devicetree/bindings/input/gpio-beeper.yaml
new file mode 100644
index 000000000000..290372add3d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/gpio-beeper.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/gpio-beeper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled beeper
+
+maintainers:
+  - Fabio Estevam <festevam@denx.de>
+
+properties:
+  compatible:
+    const: gpio-beeper
+
+  gpios:
+    maxItems: 1
+    description:
+      GPIO that drives the beeper.
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    beeper {
+        compatible = "gpio-beeper";
+        gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
index 060a309ff8e7..159cd9d9fe57 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/gpio-keys.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Device-Tree bindings for GPIO attached keys
+title: GPIO attached keys
 
 maintainers:
   - Rob Herring <robh@kernel.org>
@@ -15,113 +15,106 @@ properties:
       - gpio-keys
       - gpio-keys-polled
 
+  autorepeat: true
+
+  label:
+    description: Name of entire device
+
+  poll-interval: true
+
 patternProperties:
-  ".*":
-    if:
-      type: object
-    then:
-      $ref: input.yaml#
+  "^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$":
+    $ref: input.yaml#
 
-      properties:
-        gpios:
-          maxItems: 1
+    properties:
+      gpios:
+        maxItems: 1
 
-        interrupts:
-          maxItems: 1
+      interrupts:
+        maxItems: 1
 
-        label:
-          description: Descriptive name of the key.
+      label:
+        description: Descriptive name of the key.
 
-        linux,code:
-          description: Key / Axis code to emit.
-          $ref: /schemas/types.yaml#/definitions/uint32
+      linux,code:
+        description: Key / Axis code to emit.
 
-        linux,input-type:
-          description:
-            Specify event type this button/key generates. If not specified defaults to
-            <1> == EV_KEY.
-          $ref: /schemas/types.yaml#/definitions/uint32
+      linux,input-type:
+        default: 1  # EV_KEY
 
-          default: 1
+      linux,input-value:
+        description: |
+          If linux,input-type is EV_ABS or EV_REL then this
+          value is sent for events this button generates when pressed.
+          EV_ABS/EV_REL axis will generate an event with a value of 0
+          when all buttons with linux,input-type == type and
+          linux,code == axis are released. This value is interpreted
+          as a signed 32 bit value, e.g. to make a button generate a
+          value of -1 use:
 
-        linux,input-value:
-          description: |
-            If linux,input-type is EV_ABS or EV_REL then this
-            value is sent for events this button generates when pressed.
-            EV_ABS/EV_REL axis will generate an event with a value of 0
-            when all buttons with linux,input-type == type and
-            linux,code == axis are released. This value is interpreted
-            as a signed 32 bit value, e.g. to make a button generate a
-            value of -1 use:
+          linux,input-value = <0xffffffff>; /* -1 */
 
-            linux,input-value = <0xffffffff>; /* -1 */
+        $ref: /schemas/types.yaml#/definitions/uint32
 
-          $ref: /schemas/types.yaml#/definitions/uint32
+      debounce-interval:
+        description:
+          Debouncing interval time in milliseconds. If not specified defaults to 5.
+        $ref: /schemas/types.yaml#/definitions/uint32
 
-        debounce-interval:
-          description:
-            Debouncing interval time in milliseconds. If not specified defaults to 5.
-          $ref: /schemas/types.yaml#/definitions/uint32
+        default: 5
 
-          default: 5
+      wakeup-source:
+        description: Button can wake-up the system.
 
-        wakeup-source:
-          description: Button can wake-up the system.
+      wakeup-event-action:
+        description: |
+          Specifies whether the key should wake the system when asserted, when
+          deasserted, or both. This property is only valid for keys that wake up the
+          system (e.g., when the "wakeup-source" property is also provided).
 
-        wakeup-event-action:
-          description: |
-            Specifies whether the key should wake the system when asserted, when
-            deasserted, or both. This property is only valid for keys that wake up the
-            system (e.g., when the "wakeup-source" property is also provided).
+          Supported values are defined in linux-event-codes.h:
 
-            Supported values are defined in linux-event-codes.h:
+            EV_ACT_ANY        - both asserted and deasserted
+            EV_ACT_ASSERTED   - asserted
+            EV_ACT_DEASSERTED - deasserted
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [0, 1, 2]
 
-              EV_ACT_ANY        - both asserted and deasserted
-              EV_ACT_ASSERTED   - asserted
-              EV_ACT_DEASSERTED - deasserted
-          $ref: /schemas/types.yaml#/definitions/uint32
-          enum: [0, 1, 2]
+      linux,can-disable:
+        description:
+          Indicates that button is connected to dedicated (not shared) interrupt
+          which can be disabled to suppress events from the button.
+        type: boolean
 
-        linux,can-disable:
-          description:
-            Indicates that button is connected to dedicated (not shared) interrupt
-            which can be disabled to suppress events from the button.
-          type: boolean
+    required:
+      - linux,code
 
-        pinctrl-0:
-          maxItems: 1
+    anyOf:
+      - required:
+          - interrupts
+      - required:
+          - interrupts-extended
+      - required:
+          - gpios
 
-        pinctrl-names:
-          maxItems: 1
+    dependencies:
+      wakeup-event-action: [ wakeup-source ]
+      linux,input-value: [ gpios ]
 
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: input.yaml#
+  - if:
+      properties:
+        compatible:
+          const: gpio-keys-polled
+    then:
       required:
-        - linux,code
-
-      anyOf:
-        - required:
-            - interrupts
-        - required:
-            - gpios
-
-      dependencies:
-        wakeup-event-action: [ wakeup-source ]
-        linux,input-value: [ gpios ]
-
-      unevaluatedProperties: false
-
-if:
-  properties:
-    compatible:
-      const: gpio-keys-polled
-then:
-  properties:
-    poll-interval:
-      description:
-        Poll interval time in milliseconds
-      $ref: /schemas/types.yaml#/definitions/uint32
-
-  required:
-    - poll-interval
+        - poll-interval
+    else:
+      properties:
+        poll-interval: false
 
 additionalProperties: false
 
@@ -133,16 +126,16 @@ examples:
         compatible = "gpio-keys";
         autorepeat;
 
-        up {
+        key-up {
             label = "GPIO Key UP";
             linux,code = <103>;
             gpios = <&gpio1 0 1>;
         };
 
-        down {
+        key-down {
             label = "GPIO Key DOWN";
             linux,code = <108>;
-            interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
         };
     };
 
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
deleted file mode 100644
index c76bafaf98d2..000000000000
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* HID over I2C Device-Tree bindings
-
-HID over I2C provides support for various Human Interface Devices over the
-I2C bus. These devices can be for example touchpads, keyboards, touch screens
-or sensors.
-
-The specification has been written by Microsoft and is currently available here:
-http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
-
-If this binding is used, the kernel module i2c-hid will handle the communication
-with the device and the generic hid core layer will handle the protocol.
-
-Required properties:
-- compatible: must be "hid-over-i2c"
-- reg: i2c slave address
-- hid-descr-addr: HID descriptor address
-- interrupts: interrupt line
-
-Additional optional properties:
-
-Some devices may support additional optional properties to help with, e.g.,
-power sequencing. The following properties can be supported by one or more
-device-specific compatible properties, which should be used in addition to the
-"hid-over-i2c" string.
-
-- compatible:
-  * "wacom,w9013" (Wacom W9013 digitizer). Supports:
-    - vdd-supply (3.3V)
-    - vddl-supply (1.8V)
-    - post-power-on-delay-ms
-
-- vdd-supply: phandle of the regulator that provides the supply voltage.
-- post-power-on-delay-ms: time required by the device after enabling its regulators
-  or powering it on, before it is ready for communication.
-
-Example:
-
-	i2c-hid-dev@2c {
-		compatible = "hid-over-i2c";
-		reg = <0x2c>;
-		hid-descr-addr = <0x0020>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <3 2>;
-	};
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.yaml b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
new file mode 100644
index 000000000000..7156b08f7645
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/hid-over-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HID over I2C Devices
+
+maintainers:
+  - Benjamin Tissoires <benjamin.tissoires@redhat.com>
+  - Jiri Kosina <jkosina@suse.cz>
+
+description: |+
+  HID over I2C provides support for various Human Interface Devices over the
+  I2C bus. These devices can be for example touchpads, keyboards, touch screens
+  or sensors.
+
+  The specification has been written by Microsoft and is currently available here:
+  https://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
+
+  If this binding is used, the kernel module i2c-hid will handle the communication
+  with the device and the generic hid core layer will handle the protocol.
+
+allOf:
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - wacom,w9013
+          - const: hid-over-i2c
+      - description: Just "hid-over-i2c" alone is allowed, but not recommended.
+        const: hid-over-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  hid-descr-addr:
+    description: HID descriptor address
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  post-power-on-delay-ms:
+    description: Time required by the device after enabling its regulators
+      or powering it on, before it is ready for communication.
+
+  touchscreen-inverted-x: true
+
+  touchscreen-inverted-y: true
+
+  vdd-supply:
+    description: 3.3V supply
+
+  vddl-supply:
+    description: 1.8V supply
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hid@2c {
+            compatible = "hid-over-i2c";
+            reg = <0x2c>;
+            hid-descr-addr = <0x0020>;
+            interrupts = <3 2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/ibm,op-panel.yaml b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml
new file mode 100644
index 000000000000..29a1879e356d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ibm,op-panel.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ibm,op-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IBM Operation Panel
+
+maintainers:
+  - Eddie James <eajames@linux.ibm.com>
+
+allOf:
+  - $ref: input.yaml#
+
+description: |
+  The IBM Operation Panel provides a simple interface to control the connected
+  server. It has a display and three buttons: two directional arrows and one
+  'Enter' button.
+
+properties:
+  compatible:
+    const: ibm,op-panel
+
+  reg:
+    maxItems: 1
+
+  linux,keycodes:
+    minItems: 1
+    maxItems: 3
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/i2c/i2c.h>
+    #include <dt-bindings/input/input.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ibm-op-panel@62 {
+            compatible = "ibm,op-panel";
+            reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+            linux,keycodes = <KEY_UP>, <KEY_DOWN>, <KEY_ENTER>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
deleted file mode 100644
index cdcaa3f52d25..000000000000
--- a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller
-
-Required properties:
-- compatible:
-    ilitek,ili210x for ILI210x
-    ilitek,ili2117 for ILI2117
-    ilitek,ili2120 for ILI2120
-    ilitek,ili251x for ILI251x
-
-- reg: The I2C address of the device
-
-- interrupts: The sink for the touchscreen's IRQ output
-    See ../interrupt-controller/interrupts.txt
-
-Optional properties for main touchpad device:
-
-- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
-
-Example:
-
-	touchscreen@41 {
-		compatible = "ilitek,ili251x";
-		reg = <0x41>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/input/imx-keypad.yaml b/Documentation/devicetree/bindings/input/imx-keypad.yaml
index f21db81206b4..b110eb1f3358 100644
--- a/Documentation/devicetree/bindings/input/imx-keypad.yaml
+++ b/Documentation/devicetree/bindings/input/imx-keypad.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/input/imx-keypad.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale i.MX Keypad Port(KPP) device tree bindings
+title: Freescale i.MX Keypad Port(KPP)
 
 maintainers:
   - Liu Ying <gnuiyl@gmail.com>
 
 allOf:
-  - $ref: "/schemas/input/matrix-keymap.yaml#"
+  - $ref: /schemas/input/matrix-keymap.yaml#
 
 description: |
   The KPP is designed to interface with a keypad matrix with 2-point contact
diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml
index d41d8743aad4..94f7942189e8 100644
--- a/Documentation/devicetree/bindings/input/input.yaml
+++ b/Documentation/devicetree/bindings/input/input.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/input.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common input schema binding
+title: Input Devices Common Properties
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
@@ -21,7 +21,26 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
       minimum: 0
-      maximum: 0xff
+      maximum: 0x2ff
+
+  linux,code:
+    description:
+      Specifies a single numeric keycode value to be used for reporting
+      button/switch events. Specify KEY_RESERVED (0) to opt out of event
+      reporting.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 0x2ff
+
+  linux,input-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 1   # EV_KEY
+      - 2   # EV_REL
+      - 3   # EV_ABS
+      - 5   # EV_SW
+    description:
+      Specifies whether the event is to be interpreted as a key, relative,
+      absolute, or switch.
 
   poll-interval:
     description: Poll interval time in milliseconds.
@@ -39,4 +58,7 @@ properties:
       reset automatically. Device with key pressed reset feature can specify
       this property.
 
+dependencies:
+  linux,input-type: [ "linux,code" ]
+
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml
index 9c154e5e1a91..3c430d38594f 100644
--- a/Documentation/devicetree/bindings/input/iqs269a.yaml
+++ b/Documentation/devicetree/bindings/input/iqs269a.yaml
@@ -370,6 +370,7 @@ patternProperties:
     patternProperties:
       "^event-prox(-alt)?$":
         type: object
+        $ref: input.yaml#
         description:
           Represents a proximity event reported by the channel in response to
           a decrease in counts. Node names suffixed with '-alt' instead corre-
@@ -396,14 +397,13 @@ patternProperties:
             default: 10
             description: Specifies the threshold for the event.
 
-          linux,code:
-            $ref: /schemas/types.yaml#/definitions/uint32
-            description: Numeric key or switch code associated with the event.
+          linux,code: true
 
         additionalProperties: false
 
       "^event-touch(-alt)?$":
         type: object
+        $ref: input.yaml#
         description: Represents a touch event reported by the channel.
 
         properties:
@@ -421,14 +421,13 @@ patternProperties:
             default: 4
             description: Specifies the hysteresis for the event.
 
-          linux,code:
-            $ref: /schemas/types.yaml#/definitions/uint32
-            description: Numeric key or switch code associated with the event.
+          linux,code: true
 
         additionalProperties: false
 
       "^event-deep(-alt)?$":
         type: object
+        $ref: input.yaml#
         description: Represents a deep-touch event reported by the channel.
 
         properties:
@@ -446,9 +445,7 @@ patternProperties:
             default: 0
             description: Specifies the hysteresis for the event.
 
-          linux,code:
-            $ref: /schemas/types.yaml#/definitions/uint32
-            description: Numeric key or switch code associated with the event.
+          linux,code: true
 
         additionalProperties: false
 
@@ -475,7 +472,7 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-            iqs269a@44 {
+            touch@44 {
                     #address-cells = <1>;
                     #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/input/iqs626a.yaml b/Documentation/devicetree/bindings/input/iqs626a.yaml
index 0cb736c541c9..e424d67b0542 100644
--- a/Documentation/devicetree/bindings/input/iqs626a.yaml
+++ b/Documentation/devicetree/bindings/input/iqs626a.yaml
@@ -449,6 +449,7 @@ patternProperties:
     patternProperties:
       "^event-(prox|touch|deep)(-alt)?$":
         type: object
+        $ref: input.yaml#
         description:
           Represents a proximity, touch or deep-touch event reported by the
           channel in response to a decrease in counts. Node names suffixed with
@@ -487,21 +488,15 @@ patternProperties:
               Specifies the hysteresis for the event (touch and deep-touch
               events only).
 
-          linux,code:
-            $ref: /schemas/types.yaml#/definitions/uint32
-            description: Numeric key or switch code associated with the event.
+          linux,code: true
 
           linux,input-type:
-            $ref: /schemas/types.yaml#/definitions/uint32
             enum: [1, 5]
             description:
               Specifies whether the event is to be interpreted as a key (1) or
               a switch (5). By default, Hall-channel events are interpreted as
               switches and all others are interpreted as keys.
 
-        dependencies:
-          linux,input-type: ["linux,code"]
-
         additionalProperties: false
 
     dependencies:
@@ -511,6 +506,7 @@ patternProperties:
 
   "^trackpad-3x[2-3]$":
     type: object
+    $ref: input.yaml#
     description:
       Represents all channels associated with the trackpad. The channels are
       collectively active if the trackpad is defined and inactive otherwise.
@@ -568,16 +564,6 @@ patternProperties:
           2: Partial
           3: Full
 
-      azoteq,ati-base:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 6
-        maxItems: 9
-        items:
-          minimum: 45
-          maximum: 300
-        default: [45, 45, 45, 45, 45, 45, 45, 45, 45]
-        description: Specifies each individual trackpad channel's ATI base.
-
       azoteq,ati-target:
         $ref: /schemas/types.yaml#/definitions/uint32
         multipleOf: 32
@@ -624,17 +610,6 @@ patternProperties:
         description:
           Tightens the ATI band from 1/8 to 1/16 of the desired target.
 
-      azoteq,thresh:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        minItems: 6
-        maxItems: 9
-        items:
-          minimum: 0
-          maximum: 255
-        default: [0, 0, 0, 0, 0, 0, 0, 0, 0]
-        description:
-          Specifies each individual trackpad channel's touch threshold.
-
       azoteq,hyst:
         $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
@@ -679,7 +654,6 @@ patternProperties:
           Specifies the raw count filter strength during low-power mode.
 
       linux,keycodes:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
         minItems: 1
         maxItems: 6
         description: |
@@ -725,6 +699,28 @@ patternProperties:
           Specifies the number of points across which an axial gesture must
           travel in order to be interpreted as a flick or swipe.
 
+    patternProperties:
+      "^channel-[0-8]$":
+        type: object
+        description: Represents a single trackpad channel.
+
+        properties:
+          azoteq,thresh:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 255
+            default: 0
+            description: Specifies the threshold for the channel.
+
+          azoteq,ati-base:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 45
+            maximum: 300
+            default: 45
+            description: Specifies the channel's ATI base.
+
+        additionalProperties: false
+
     dependencies:
       azoteq,gesture-swipe: ["linux,keycodes"]
       azoteq,timeout-tap-ms: ["linux,keycodes"]
@@ -751,7 +747,7 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-            iqs626a@44 {
+            touch@44 {
                     #address-cells = <1>;
                     #size-cells = <0>;
 
@@ -785,14 +781,8 @@ examples:
                             azoteq,filt-str-lp-cnt = <1>;
 
                             azoteq,hyst = <4>;
-                            azoteq,thresh = <35>, <40>, <40>,
-                                            <38>, <33>, <38>,
-                                            <35>, <35>, <35>;
 
                             azoteq,ati-mode = <3>;
-                            azoteq,ati-base = <195>, <195>, <195>,
-                                              <195>, <195>, <195>,
-                                              <195>, <195>, <195>;
                             azoteq,ati-target = <512>;
 
                             azoteq,proj-bias = <1>;
@@ -809,6 +799,51 @@ examples:
                             azoteq,timeout-swipe-ms = <800>;
                             azoteq,timeout-tap-ms = <400>;
                             azoteq,thresh-swipe = <40>;
+
+                            channel-0 {
+                                    azoteq,thresh = <35>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-1 {
+                                    azoteq,thresh = <40>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-2 {
+                                    azoteq,thresh = <40>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-3 {
+                                    azoteq,thresh = <38>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-4 {
+                                    azoteq,thresh = <33>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-5 {
+                                    azoteq,thresh = <38>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-6 {
+                                    azoteq,thresh = <35>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-7 {
+                                    azoteq,thresh = <35>;
+                                    azoteq,ati-base = <195>;
+                            };
+
+                            channel-8 {
+                                    azoteq,thresh = <35>;
+                                    azoteq,ati-base = <195>;
+                            };
                     };
 
                     /*
diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
index 77fe3b545b35..0aa951f0ab92 100644
--- a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
+++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml
@@ -9,6 +9,9 @@ title: Azoteq IQS620A/621/622/624/625 Keys and Switches
 maintainers:
   - Jeff LaBundy <jeff@labundy.com>
 
+allOf:
+  - $ref: input.yaml#
+
 description: |
   The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors
   feature a variety of self-capacitive, mutual-inductive and Hall-effect sens-
@@ -30,7 +33,6 @@ properties:
       - azoteq,iqs625-keys
 
   linux,keycodes:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     maxItems: 16
     description: |
@@ -89,15 +91,14 @@ properties:
 patternProperties:
   "^hall-switch-(north|south)$":
     type: object
+    $ref: input.yaml#
     description:
       Represents north/south-field Hall-effect sensor touch or proximity
       events. Note that north/south-field orientation is reversed on the
       IQS620AXzCSR device due to its flip-chip package.
 
     properties:
-      linux,code:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Numeric switch code associated with the event.
+      linux,code: true
 
       azoteq,use-prox:
         $ref: /schemas/types.yaml#/definitions/flag
diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml
index 6699d5e32dca..a715c2a773fe 100644
--- a/Documentation/devicetree/bindings/input/matrix-keymap.yaml
+++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/matrix-keymap.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common key matrices binding for matrix-connected key boards
+title: Common Key Matrices on Matrix-connected Key Boards
 
 maintainers:
   - Olof Johansson <olof@lixom.net>
@@ -21,7 +21,7 @@ description: |
 
 properties:
   linux,keymap:
-    $ref: '/schemas/types.yaml#/definitions/uint32-array'
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     description: |
       An array of packed 1-cell entries containing the equivalent of row,
       column and linux key-code. The 32-bit big endian cell is packed as:
diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
index 3a2ad6ec64db..48edc0c8c1dd 100644
--- a/Documentation/devicetree/bindings/input/max77650-onkey.yaml
+++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
@@ -16,15 +16,15 @@ description: |
   The onkey controller is represented as a sub-node of the PMIC node on
   the device tree.
 
+allOf:
+  - $ref: input.yaml#
+
 properties:
   compatible:
     const: maxim,max77650-onkey
 
   linux,code:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      The key-code to be reported when the key is pressed. Defaults
-      to KEY_POWER.
+    default: 116  # KEY_POWER
 
   maxim,onkey-slide:
     $ref: /schemas/types.yaml#/definitions/flag
diff --git a/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
new file mode 100644
index 000000000000..47aac8794b68
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mediatek,mt6779-keypad.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/mediatek,mt6779-keypad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek's Keypad Controller
+
+maintainers:
+  - Mattijs Korpershoek <mkorpershoek@baylibre.com>
+
+allOf:
+  - $ref: /schemas/input/matrix-keymap.yaml#
+
+description: |
+  Mediatek's Keypad controller is used to interface a SoC with a matrix-type
+  keypad device. The keypad controller supports multiple row and column lines.
+  A key can be placed at each intersection of a unique row and a unique column.
+  The keypad controller can sense a key-press and key-release and report the
+  event using a interrupt to the cpu.
+
+properties:
+  compatible:
+    oneOf:
+      - const: mediatek,mt6779-keypad
+      - items:
+          - enum:
+              - mediatek,mt6873-keypad
+          - const: mediatek,mt6779-keypad
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: kpd
+
+  wakeup-source:
+    description: use any event on keypad as wakeup event
+    type: boolean
+
+  debounce-delay-ms:
+    maximum: 256
+    default: 16
+
+  mediatek,keys-per-group:
+    description: each (row, column) group has multiple keys
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    maximum: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        keyboard@10010000 {
+          compatible = "mediatek,mt6779-keypad";
+          reg = <0 0x10010000 0 0x1000>;
+          interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_FALLING>;
+          clocks = <&clk26m>;
+          clock-names = "kpd";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
new file mode 100644
index 000000000000..037c3ae9f1c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/mediatek,pmic-keys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PMIC Keys
+
+maintainers:
+  - Chen Zhong <chen.zhong@mediatek.com>
+
+allOf:
+  - $ref: input.yaml#
+
+description: |
+  There are two key functions provided by MT6397, MT6323 and other MediaTek
+  PMICs: pwrkey and homekey.
+  The key functions are defined as the subnode of the function node provided
+  by the PMIC that is defined as a Multi-Function Device (MFD).
+
+  For MediaTek MT6323/MT6397 PMIC bindings see
+  Documentation/devicetree/bindings/mfd/mt6397.txt
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6323-keys
+      - mediatek,mt6331-keys
+      - mediatek,mt6357-keys
+      - mediatek,mt6358-keys
+      - mediatek,mt6397-keys
+
+  power-off-time-sec: true
+
+  mediatek,long-press-mode:
+    description: |
+      Key long-press force shutdown setting
+      0 - disabled
+      1 - pwrkey
+      2 - pwrkey+homekey
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    maximum: 2
+
+patternProperties:
+  "^((power|home)|(key-[a-z0-9-]+|[a-z0-9-]+-key))$":
+    $ref: input.yaml#
+
+    properties:
+      interrupts:
+        minItems: 1
+        items:
+          - description: Key press interrupt
+          - description: Key release interrupt
+
+      interrupt-names: true
+
+      linux-keycodes:
+        maxItems: 1
+
+      wakeup-source: true
+
+    required:
+      - linux,keycodes
+
+    if:
+      properties:
+        interrupt-names:
+          contains:
+            const: powerkey
+    then:
+      properties:
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: powerkey
+            - const: powerkey_r
+    else:
+      properties:
+        interrupt-names:
+          minItems: 1
+          items:
+            - const: homekey
+            - const: homekey_r
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmic {
+        compatible = "mediatek,mt6397";
+
+        keys {
+          compatible = "mediatek,mt6397-keys";
+          mediatek,long-press-mode = <1>;
+          power-off-time-sec = <0>;
+
+          key-power {
+            linux,keycodes = <KEY_POWER>;
+            wakeup-source;
+          };
+
+          key-home {
+            linux,keycodes = <KEY_VOLUMEDOWN>;
+          };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
new file mode 100644
index 000000000000..5b5d4f7d3482
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/microchip,cap11xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip CAP11xx based capacitive touch sensors
+
+description: |
+  The Microchip CAP1xxx Family of RightTouchTM multiple-channel capacitive
+  touch controllers and LED drivers. The device communication via I2C only.
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - microchip,cap1106
+      - microchip,cap1126
+      - microchip,cap1188
+      - microchip,cap1203
+      - microchip,cap1206
+      - microchip,cap1293
+      - microchip,cap1298
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+    description: |
+      Property describing the interrupt line the
+      device's ALERT#/CM_IRQ# pin is connected to.
+      The device only has one interrupt source.
+
+  autorepeat:
+    description: |
+      Enables the Linux input system's autorepeat feature on the input device.
+
+  linux,keycodes:
+    minItems: 6
+    maxItems: 6
+    description: |
+      Specifies an array of numeric keycode values to
+      be used for the channels. If this property is
+      omitted, KEY_A, KEY_B, etc are used as defaults.
+      The array must have exactly six entries.
+
+  microchip,sensor-gain:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 1
+    enum: [1, 2, 4, 8]
+    description: |
+      Defines the gain of the sensor circuitry. This
+      effectively controls the sensitivity, as a
+      smaller delta capacitance is required to
+      generate the same delta count values.
+
+  microchip,irq-active-high:
+    type: boolean
+    description: |
+      By default the interrupt pin is active low
+      open drain. This property allows using the active
+      high push-pull output.
+
+patternProperties:
+  "^led@[0-7]$":
+    type: object
+    description: CAP11xx LEDs
+    $ref: /schemas/leds/common.yaml#
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+      label: true
+
+      linux,default-trigger: true
+
+      default-state: true
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+allOf:
+  - $ref: input.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,cap1106
+    then:
+      patternProperties:
+        "^led@[0-7]$": false
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touch@28 {
+        compatible = "microchip,cap1188";
+        interrupt-parent = <&gpio1>;
+        interrupts = <0 0>;
+        reg = <0x28>;
+        autorepeat;
+        microchip,sensor-gain = <2>;
+
+        linux,keycodes = <103>,	/* KEY_UP */
+                         <106>,	/* KEY_RIGHT */
+                         <108>,	/* KEY_DOWN */
+                         <105>,	/* KEY_LEFT */
+                         <109>,	/* KEY_PAGEDOWN */
+                         <104>;	/* KEY_PAGEUP */
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@0 {
+                label = "cap11xx:green:usr0";
+                reg = <0>;
+        };
+
+        led@1 {
+                label = "cap11xx:green:usr1";
+                reg = <1>;
+        };
+
+        led@2 {
+                label = "cap11xx:green:alive";
+                reg = <2>;
+                linux,default-trigger = "heartbeat";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt b/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
deleted file mode 100644
index 535d92885372..000000000000
--- a/Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-MediaTek MT6397/MT6323 PMIC Keys Device Driver
-
-There are two key functions provided by MT6397/MT6323 PMIC, pwrkey
-and homekey. The key functions are defined as the subnode of the function
-node provided by MT6397/MT6323 PMIC that is being defined as one kind
-of Muti-Function Device (MFD)
-
-For MT6397/MT6323 MFD bindings see:
-Documentation/devicetree/bindings/mfd/mt6397.txt
-
-Required properties:
-- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
-- linux,keycodes: See Documentation/devicetree/bindings/input/input.yaml
-
-Optional Properties:
-- wakeup-source: See Documentation/devicetree/bindings/power/wakeup-source.txt
-- mediatek,long-press-mode: Long press key shutdown setting, 1 for
-	pwrkey only, 2 for pwrkey/homekey together, others for disabled.
-- power-off-time-sec: See Documentation/devicetree/bindings/input/input.yaml
-
-Example:
-
-	pmic: mt6397 {
-		compatible = "mediatek,mt6397";
-
-		...
-
-		mt6397keys: mt6397keys {
-			compatible = "mediatek,mt6397-keys";
-			mediatek,long-press-mode = <1>;
-			power-off-time-sec = <0>;
-
-			power {
-				linux,keycodes = <116>;
-				wakeup-source;
-			};
-
-			home {
-				linux,keycodes = <114>;
-			};
-		};
-
-	};
diff --git a/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml
new file mode 100644
index 000000000000..490f6c3d9e4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pine64,pinephone-keyboard.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/pine64,pinephone-keyboard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pine64 PinePhone keyboard
+
+maintainers:
+  - Samuel Holland <samuel@sholland.org>
+
+description:
+  A keyboard accessory is available for the Pine64 PinePhone and PinePhone Pro.
+  It connects via I2C, providing a raw scan matrix, a flashing interface, and a
+  subordinate I2C bus for communication with a battery charger IC.
+
+properties:
+  compatible:
+    const: pine64,pinephone-keyboard
+
+  reg:
+    const: 0x15
+
+  interrupts:
+    maxItems: 1
+
+  vbat-supply:
+    description: Supply for the keyboard MCU
+
+  wakeup-source: true
+
+  i2c:
+    $ref: /schemas/i2c/i2c-controller.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      keyboard@15 {
+        compatible = "pine64,pinephone-keyboard";
+        reg = <0x15>;
+        interrupt-parent = <&r_pio>;
+        interrupts = <0 12 IRQ_TYPE_EDGE_FALLING>; /* PL12 */
+
+        i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          charger@75 {
+            reg = <0x75>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
deleted file mode 100644
index 8fc0e48c20db..000000000000
--- a/Documentation/devicetree/bindings/input/pwm-beeper.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* PWM beeper device tree bindings
-
-Registers a PWM device as beeper.
-
-Required properties:
-- compatible: should be "pwm-beeper"
-- pwms: phandle to the physical PWM device
-
-Optional properties:
-- amp-supply: phandle to a regulator that acts as an amplifier for the beeper
-- beeper-hz:  bell frequency in Hz
-
-Example:
-
-beeper_amp: amplifier {
-	compatible = "fixed-regulator";
-	gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
-};
-
-beeper {
-	compatible = "pwm-beeper";
-	pwms = <&pwm0>;
-	amp-supply = <&beeper_amp>;
-};
diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.yaml b/Documentation/devicetree/bindings/input/pwm-beeper.yaml
new file mode 100644
index 000000000000..a7611c206989
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-beeper.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/pwm-beeper.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM beeper
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    const: pwm-beeper
+
+  pwms:
+    maxItems: 1
+
+  amp-supply:
+    description: an amplifier for the beeper
+
+  beeper-hz:
+    description: bell frequency in Hz
+    minimum: 10
+    maximum: 10000
+
+required:
+  - compatible
+  - pwms
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    beeper {
+        compatible = "pwm-beeper";
+        pwms = <&pwm0>;
+        amp-supply = <&beeper_amp>;
+        beeper-hz = <1000>;
+    };
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.txt b/Documentation/devicetree/bindings/input/pwm-vibrator.txt
deleted file mode 100644
index 88c775a3fe21..000000000000
--- a/Documentation/devicetree/bindings/input/pwm-vibrator.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-* PWM vibrator device tree bindings
-
-Registers a PWM device as vibrator. It is expected, that the vibrator's
-strength increases based on the duty cycle of the enable PWM channel
-(100% duty cycle meaning strongest vibration, 0% meaning no vibration).
-
-The binding supports an optional direction PWM channel, that can be
-driven at fixed duty cycle. If available this is can be used to increase
-the vibration effect of some devices.
-
-Required properties:
-- compatible: should contain "pwm-vibrator"
-- pwm-names: Should contain "enable" and optionally "direction"
-- pwms: Should contain a PWM handle for each entry in pwm-names
-
-Optional properties:
-- vcc-supply: Phandle for the regulator supplying power
-- direction-duty-cycle-ns: Duty cycle of the direction PWM channel in
-                           nanoseconds, defaults to 50% of the channel's
-			   period.
-
-Example from Motorola Droid 4:
-
-&omap4_pmx_core {
-	vibrator_direction_pin: pinmux_vibrator_direction_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
-		>;
-	};
-
-	vibrator_enable_pin: pinmux_vibrator_enable_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
-		>;
-	};
-};
-
-/ {
-	pwm8: dmtimer-pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_direction_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer8>;
-		ti,clock-source = <0x01>;
-	};
-
-	pwm9: dmtimer-pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_enable_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer9>;
-		ti,clock-source = <0x01>;
-	};
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm9 0 1000000000 0>,
-                       <&pwm8 0 1000000000 0>;
-		pwm-names = "enable", "direction";
-		direction-duty-cycle-ns = <1000000000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
new file mode 100644
index 000000000000..d32716c604fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/pwm-vibrator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM vibrator
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: >
+  Registers a PWM device as vibrator. It is expected, that the vibrator's
+  strength increases based on the duty cycle of the enable PWM channel
+  (100% duty cycle meaning strongest vibration, 0% meaning no vibration).
+
+  The binding supports an optional direction PWM channel, that can be
+  driven at fixed duty cycle. If available this is can be used to increase
+  the vibration effect of some devices.
+
+properties:
+  compatible:
+    const: pwm-vibrator
+
+  pwm-names:
+    items:
+      - const: enable
+      - const: direction
+    minItems: 1
+
+  pwms:
+    minItems: 1
+    maxItems: 2
+
+  vcc-supply: true
+
+  direction-duty-cycle-ns:
+    description: >
+      Duty cycle of the direction PWM channel in nanoseconds,
+      defaults to 50% of the channel's period.
+
+required:
+  - compatible
+  - pwm-names
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    vibrator {
+        compatible = "pwm-vibrator";
+        pwms = <&pwm9 0 1000000000 0>,
+               <&pwm8 0 1000000000 0>;
+        pwm-names = "enable", "direction";
+        direction-duty-cycle-ns = <1000000000>;
+    };
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
new file mode 100644
index 000000000000..12c74c083258
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8921-pwrkey.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8921-pwrkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8921 PMIC Power Key
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,pm8921-pwrkey
+          - qcom,pm8058-pwrkey
+      - items:
+          - enum:
+              - qcom,pm8018-pwrkey
+          - const: qcom,pm8921-pwrkey
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: key release
+      - description: key press
+
+  debounce:
+    description:
+      Time in microseconds that key must be pressed or
+      released for state change interrupt to trigger.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  pull-up:
+    description:
+      Presence of this property indicates that the KPDPWR_N
+      pin should be configured for pull up.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/irq.h>
+   ssbi {
+     #address-cells = <1>;
+     #size-cells = <0>;
+
+     pmic@0 {
+       reg = <0x0>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       pwrkey@1c {
+         compatible = "qcom,pm8921-pwrkey";
+         reg = <0x1c>;
+         interrupt-parent = <&pmicint>;
+         interrupts = <50 IRQ_TYPE_EDGE_RISING>, <51 IRQ_TYPE_EDGE_RISING>;
+         debounce = <15625>;
+         pull-up;
+       };
+     };
+   };
+...
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt
deleted file mode 100644
index 588536cc96ed..000000000000
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-pwrkey.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Qualcomm PM8xxx PMIC Power Key
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8058-pwrkey"
-		    "qcom,pm8921-pwrkey"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: address of power key control register
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: the first interrupt specifies the key release interrupt
-		    and the second interrupt specifies the key press interrupt.
-		    The format of the specifier is defined by the binding
-		    document describing the node's interrupt parent.
-
-- debounce:
-	Usage: optional
-	Value type: <u32>
-	Definition: time in microseconds that key must be pressed or release
-		    for state change interrupt to trigger.
-
-- pull-up:
-	Usage: optional
-	Value type: <empty>
-	Definition: presence of this property indicates that the KPDPWR_N pin
-		    should be configured for pull up.
-
-EXAMPLE
-
-	pwrkey@1c {
-		compatible = "qcom,pm8921-pwrkey";
-		reg = <0x1c>;
-		interrupt-parent = <&pmicintc>;
-		interrupts = <50 1>, <51 1>;
-		debounce = <15625>;
-		pull-up;
-	};
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt
deleted file mode 100644
index 64bb990075c3..000000000000
--- a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Qualcomm PM8xxx PMIC Vibrator
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8058-vib"
-		    "qcom,pm8916-vib"
-		    "qcom,pm8921-vib"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: address of vibration control register
-
-EXAMPLE
-
-	vibrator@4a {
-		compatible = "qcom,pm8058-vib";
-		reg = <0x4a>;
-	};
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
new file mode 100644
index 000000000000..c8832cd0d7da
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8xxx-vib.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8xxx-vib.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8xxx PMIC Vibrator
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8058-vib
+      - qcom,pm8916-vib
+      - qcom,pm8921-vib
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        vibrator@4a {
+            compatible = "qcom,pm8058-vib";
+            reg = <0x4a>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.yaml b/Documentation/devicetree/bindings/input/regulator-haptic.yaml
index b1ae72f9cd2d..cf63f834dd7d 100644
--- a/Documentation/devicetree/bindings/input/regulator-haptic.yaml
+++ b/Documentation/devicetree/bindings/input/regulator-haptic.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/input/regulator-haptic.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/input/regulator-haptic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Regulator Haptic Device Tree Bindings
+title: Regulator Haptic
 
 maintainers:
   - Jaewon Kim <jaewon02.kim@samsung.com>
diff --git a/Documentation/devicetree/bindings/input/snvs-pwrkey.txt b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
deleted file mode 100644
index 70c14250323b..000000000000
--- a/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
+++ /dev/null
@@ -1 +0,0 @@
-See Documentation/devicetree/bindings/crypto/fsl-sec4.txt
diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
index 5d67fc8ebc18..a401a0bfcbec 100644
--- a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/input/sprd,sc27xx-vibrator.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Spreadtrum SC27xx PMIC Vibrator Device Tree Bindings
+title: Spreadtrum SC27xx PMIC Vibrator
 
 maintainers:
   - Orson Zhai <orsonzhai@gmail.com>
diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt
deleted file mode 100644
index 4c5312eaaa85..000000000000
--- a/Documentation/devicetree/bindings/input/ti,drv260x.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Texas Instruments - drv260x Haptics driver family
-
-Required properties:
-	- compatible - One of:
-		"ti,drv2604" - DRV2604
-		"ti,drv2605" - DRV2605
-		"ti,drv2605l" - DRV2605L
-	- reg -  I2C slave address
-	- vbat-supply - Required supply regulator
-	- mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h)
-		DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric)
-		DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no calibration
-				sequence during init.  And the device is configured for real
-				time playback mode (RTP mode).
-		DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator)
-	- library-sel - These are ROM based waveforms pre-programmed into the IC.
-				This should be set to set the library to use at power up.
-				(defined in include/dt-bindings/input/ti-drv260x.h)
-		DRV260X_LIB_EMPTY - Do not use a pre-programmed library
-		DRV260X_ERM_LIB_A - Pre-programmed Library
-		DRV260X_ERM_LIB_B - Pre-programmed Library
-		DRV260X_ERM_LIB_C - Pre-programmed Library
-		DRV260X_ERM_LIB_D - Pre-programmed Library
-		DRV260X_ERM_LIB_E - Pre-programmed Library
-		DRV260X_ERM_LIB_F - Pre-programmed Library
-		DRV260X_LIB_LRA - Pre-programmed LRA Library
-
-Optional properties:
-	- enable-gpio - gpio pin to enable/disable the device.
-	- vib-rated-mv - The rated voltage of the actuator in millivolts.
-			  If this is not set then the value will be defaulted to
-			  3.2 v.
-	- vib-overdrive-mv - The overdrive voltage of the actuator in millivolts.
-			  If this is not set then the value will be defaulted to
-			  3.2 v.
-Example:
-
-haptics: haptics@5a {
-	compatible = "ti,drv2605l";
-	reg = <0x5a>;
-	vbat-supply = <&vbat>;
-	enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	mode = <DRV260X_LRA_MODE>;
-	library-sel = <DRV260X_LIB_LRA>;
-	vib-rated-mv = <3200>;
-	vib-overdrive-mv = <3200>;
-}
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2605
diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.yaml b/Documentation/devicetree/bindings/input/ti,drv260x.yaml
new file mode 100644
index 000000000000..c6245c5b9e2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv260x.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,drv260x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - drv260x Haptics driver family
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,drv2604
+      - ti,drv2605
+      - ti,drv2605l
+
+  reg:
+    maxItems: 1
+
+  vbat-supply:
+    description: Power supply to the haptic motor
+
+  # TODO: Deprecate 'mode' in favor of differently named property
+  mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Power up mode of the chip
+      (defined in include/dt-bindings/input/ti-drv260x.h)
+
+      DRV260X_LRA_MODE
+        Linear Resonance Actuator mode (Piezoelectric)
+
+      DRV260X_LRA_NO_CAL_MODE
+        This is a LRA Mode but there is no calibration sequence during init.
+        And the device is configured for real time playback mode (RTP mode).
+
+      DRV260X_ERM_MODE
+        Eccentric Rotating Mass mode (Rotary vibrator)
+    enum: [ 0, 1, 2 ]
+
+  library-sel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      These are ROM based waveforms pre-programmed into the IC.
+      This should be set to set the library to use at power up.
+      (defined in include/dt-bindings/input/ti-drv260x.h)
+
+      DRV260X_LIB_EMPTY - Do not use a pre-programmed library
+      DRV260X_ERM_LIB_A - Pre-programmed Library
+      DRV260X_ERM_LIB_B - Pre-programmed Library
+      DRV260X_ERM_LIB_C - Pre-programmed Library
+      DRV260X_ERM_LIB_D - Pre-programmed Library
+      DRV260X_ERM_LIB_E - Pre-programmed Library
+      DRV260X_ERM_LIB_F - Pre-programmed Library
+      DRV260X_LIB_LRA - Pre-programmed LRA Library
+    enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
+
+  enable-gpio:
+    maxItems: 1
+    deprecated: true
+
+  enable-gpios:
+    maxItems: 1
+
+  vib-rated-mv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The rated voltage of the actuator in millivolts.
+      If this is not set then the value will be defaulted to 3200 mV.
+    default: 3200
+
+  vib-overdrive-mv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The overdrive voltage of the actuator in millivolts.
+      If this is not set then the value will be defaulted to 3200 mV.
+    default: 3200
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - mode
+  - library-sel
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/ti-drv260x.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        haptics@5a {
+            compatible = "ti,drv2605l";
+            reg = <0x5a>;
+            vbat-supply = <&vbat>;
+            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            mode = <DRV260X_LRA_MODE>;
+            library-sel = <DRV260X_LIB_LRA>;
+            vib-rated-mv = <3200>;
+            vib-overdrive-mv = <3200>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
index f40f21c642b9..b8db975e9f77 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/auo_pixcir_ts.txt
@@ -17,10 +17,10 @@ Example:
 		auo_pixcir_ts@5c {
 			compatible = "auo,auo_pixcir_ts";
 			reg = <0x5c>;
-			interrupts = <2 0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 
-			gpios = <&gpf 2 0 2>, /* INT */
-				<&gpf 5 1 0>; /* RST */
+			gpios = <&gpf 2 0 GPIO_LEVEL_HIGH>, /* INT */
+				<&gpf 5 1 GPIO_LEVEL_LOW>; /* RST */
 
 			x-size = <800>;
 			y-size = <600>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
index 9df685bdc5db..74a8a01e0745 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/chipone,icn8318.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ChipOne ICN8318 Touchscreen Controller Device Tree Bindings
+title: ChipOne ICN8318 Touchscreen Controller
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
diff --git a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
index 2e1490a8fe74..ca304357c374 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/colibri-vf50-ts.txt
@@ -3,15 +3,16 @@
 Required Properties:
 - compatible must be toradex,vf50-touchscreen
 - io-channels: adc channels being used by the Colibri VF50 module
+    IIO ADC for Y-, X-, Y+, X+ connections
 - xp-gpios: FET gate driver for input of X+
 - xm-gpios: FET gate driver for input of X-
 - yp-gpios: FET gate driver for input of Y+
 - ym-gpios: FET gate driver for input of Y-
-- interrupts: pen irq interrupt for touch detection
-- pinctrl-names: "idle", "default", "gpios"
-- pinctrl-0: pinctrl node for pen/touch detection state pinmux
+- interrupts: pen irq interrupt for touch detection, signal from X plate
+- pinctrl-names: "idle", "default"
+- pinctrl-0: pinctrl node for pen/touch detection, pinctrl must provide
+    pull-up resistor on X+, X-.
 - pinctrl-1: pinctrl node for X/Y and pressure measurement (ADC) state pinmux
-- pinctrl-2: pinctrl node for gpios functioning as FET gate drivers
 - vf50-ts-min-pressure: pressure level at which to stop measuring X/Y values
 
 Example:
@@ -26,9 +27,8 @@ Example:
 		ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "idle","default","gpios";
-		pinctrl-0 = <&pinctrl_touchctrl_idle>;
-		pinctrl-1 = <&pinctrl_touchctrl_default>;
-		pinctrl-2 = <&pinctrl_touchctrl_gpios>;
+		pinctrl-names = "idle","default";
+		pinctrl-0 = <&pinctrl_touchctrl_idle>, <&pinctrl_touchctrl_gpios>;
+		pinctrl-1 = <&pinctrl_touchctrl_default>, <&pinctrl_touchctrl_gpios>;
 		vf50-ts-min-pressure = <200>;
 	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
index 3225c8d1fdaf..86a6d18f952a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma140.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Cypress CY8CTMA140 series touchscreen controller bindings
+title: Cypress CY8CTMA140 series touchscreen controller
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
index 762e56ee90cd..4dfbb93678b5 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/cypress,cy8ctma340.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Cypress CY8CTMA340 series touchscreen controller bindings
+title: Cypress CY8CTMA340 series touchscreen controller
 
 description: The Cypress CY8CTMA340 series (also known as "CYTTSP" after
   the marketing name Cypress TrueTouch Standard Product) touchscreens can
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
new file mode 100644
index 000000000000..1959ec394768
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/cypress,tt21000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress TT21000 touchscreen controller
+
+description: The Cypress TT21000 series (also known as "CYTTSP5" after
+  the marketing name Cypress TrueTouch Standard Product series 5).
+
+maintainers:
+  - Alistair Francis <alistair@alistair23.me>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: cypress,tt21000
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator for voltage.
+
+  reset-gpios:
+    maxItems: 1
+
+  linux,keycodes:
+    description: EV_ABS specific event code generated by the axis.
+
+patternProperties:
+  "^button@[0-9]+$":
+    type: object
+    $ref: ../input.yaml#
+    properties:
+      reg:
+        maxItems: 1
+      linux,keycodes:
+        description: Keycode to emit
+
+    required:
+      - reg
+      - linux,keycodes
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/linux-event-codes.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@24 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compatible = "cypress,tt21000";
+            reg = <0x24>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&tp_reset_ds203>;
+            interrupt-parent = <&pio>;
+            interrupts = <1 5 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&reg_touch>;
+
+            button@0 {
+                reg = <0>;
+                linux,keycodes = <KEY_HOMEPAGE>;
+            };
+
+            button@1 {
+                reg = <1>;
+                linux,keycodes = <KEY_MENU>;
+            };
+
+            button@2 {
+                reg = <2>;
+                linux,keycodes = <KEY_BACK>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
index 2e8da7470513..ef4c841387bd 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: FocalTech EDT-FT5x06 Polytouch Bindings
+title: FocalTech EDT-FT5x06 Polytouch
 
 description: |
              There are 5 variants of the chip for various touch panel sizes
@@ -85,6 +85,14 @@ properties:
     minimum: 0
     maximum: 80
 
+  report-rate-hz:
+    description: |
+                 Allows setting the scan rate in Hertz.
+                  M06 supports range from 30 to 140 Hz.
+                  M12 supports range from 1 to 255 Hz.
+    minimum: 1
+    maximum: 255
+
   touchscreen-size-x: true
   touchscreen-size-y: true
   touchscreen-fuzz-x: true
diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
index 92fb2620f5e2..ebbe93810574 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
@@ -13,6 +13,6 @@ Example:
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <9 2>;
-		wakeup-gpios = <&gpio1 9 0>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
index 5eef5e7d6aae..c9f2c9f578e3 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt
@@ -6,7 +6,7 @@ Required properties:
  - interrupts		  : interrupt specification for the ektf2127 interrupt
  - power-gpios		  : GPIO specification for the pin connected to the
 			    ektf2127's wake input. This needs to be driven high
-			    to take ektf2127 out of it's low power state
+			    to take ektf2127 out of its low power state
 
 For additional optional properties see: touchscreen.txt
 
diff --git a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
index a9b53c2e6f0a..3255c2c8951a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/elan,elants_i2c.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/input/touchscreen/elan,elants_i2c.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/input/touchscreen/elan,elants_i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Elantech I2C Touchscreen
 
@@ -14,9 +14,13 @@ allOf:
 
 properties:
   compatible:
-    enum:
-      - elan,ektf3624
-      - elan,ekth3500
+    oneOf:
+      - enum:
+          - elan,ektf3624
+          - elan,ekth3500
+      - items:
+          - const: elan,ekth3915
+          - const: elan,ekth3500
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
index 93f2ce3130ae..3d016b87c8df 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Goodix GT9xx series touchscreen controller Bindings
+title: Goodix GT9xx series touchscreen controller
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
@@ -16,6 +16,7 @@ properties:
   compatible:
     enum:
       - goodix,gt1151
+      - goodix,gt1158
       - goodix,gt5663
       - goodix,gt5688
       - goodix,gt911
diff --git a/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml b/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml
new file mode 100644
index 000000000000..f42b23d532eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/himax,hx83112b.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax hx83112b touchscreen controller
+
+maintainers:
+  - Job Noorman <job@noorman.info>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - himax,hx83112b
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@48 {
+        compatible = "himax,hx83112b";
+        reg = <0x48>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <65 IRQ_TYPE_LEVEL_LOW>;
+        touchscreen-size-x = <1080>;
+        touchscreen-size-y = <2160>;
+        reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
index 942562f1e45b..874c0781c476 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/hycon,hy46xx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Hycon HY46XX series touchscreen controller bindings
+title: Hycon HY46XX series touchscreen controller
 
 description: |
   There are 6 variants of the chip for various touch panel sizes and cover lens material
diff --git a/Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml
new file mode 100644
index 000000000000..9cb5d4af00f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/hynitron,cstxxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hynitron cstxxx series touchscreen controller
+
+description: |
+  Bindings for Hynitron cstxxx series multi-touch touchscreen
+  controllers.
+
+maintainers:
+  - Chris Morgan <macromorgan@hotmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - hynitron,cst340
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@1a {
+        compatible = "hynitron,cst340";
+        reg = <0x1a>;
+        interrupt-parent = <&gpio4>;
+        interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+        reset-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+        touchscreen-size-x = <640>;
+        touchscreen-size-y = <480>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
index a190e7baac31..9f7328999756 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml
@@ -15,6 +15,9 @@ allOf:
 properties:
   compatible:
     enum:
+      - ilitek,ili210x
+      - ilitek,ili2117
+      - ilitek,ili2120
       - ilitek,ili2130
       - ilitek,ili2131
       - ilitek,ili2132
@@ -22,11 +25,12 @@ properties:
       - ilitek,ili2322
       - ilitek,ili2323
       - ilitek,ili2326
+      - ilitek,ili251x
       - ilitek,ili2520
       - ilitek,ili2521
 
   reg:
-    const: 0x41
+    maxItems: 1
 
   interrupts:
     maxItems: 1
@@ -50,7 +54,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - reset-gpios
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
new file mode 100644
index 000000000000..0d6b033fd5fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/imagis,ist3038c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Imagis IST30XXC family touchscreen controller
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  $nodename:
+    pattern: "^touchscreen@[0-9a-f]+$"
+
+  compatible:
+    enum:
+      - imagis,ist3038c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply:
+    description: Power supply regulator for the chip
+
+  vddio-supply:
+    description: Power supply regulator for the I2C bus
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-inverted-x: true
+  touchscreen-inverted-y: true
+  touchscreen-swapped-x-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      touchscreen@50 {
+        compatible = "imagis,ist3038c";
+        reg = <0x50>;
+        interrupt-parent = <&gpio>;
+        interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        vdd-supply = <&ldo1_reg>;
+        vddio-supply = <&ldo2_reg>;
+        touchscreen-size-x = <720>;
+        touchscreen-size-y = <1280>;
+        touchscreen-fuzz-x = <10>;
+        touchscreen-fuzz-y = <10>;
+        touchscreen-inverted-x;
+        touchscreen-inverted-y;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
index 62366886fb3e..fdd02898e249 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/melfas,mms114.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Melfas MMS114 family touchscreen controller bindings
+title: Melfas MMS114 family touchscreen controller
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
diff --git a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
index 3a42c23faf6f..ddbbc820c7e5 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/mstar,msg2638.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MStar msg2638 touchscreen controller Bindings
+title: MStar msg2638 touchscreen controller
 
 maintainers:
   - Vincent Knecht <vincent.knecht@mailoo.org>
@@ -14,7 +14,9 @@ allOf:
 
 properties:
   compatible:
-    const: mstar,msg2638
+    enum:
+      - mstar,msg2138
+      - mstar,msg2638
 
   reg:
     const: 0x26
@@ -34,6 +36,10 @@ properties:
   touchscreen-size-x: true
   touchscreen-size-y: true
 
+  linux,keycodes:
+    minItems: 1
+    maxItems: 4
+
 additionalProperties: false
 
 required:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml
index f9998edbff70..3305eda5ed88 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/pixcir,pixcir_ts.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Pixcir Touchscreen Controller Device Tree Bindings
+title: Pixcir Touchscreen Controller
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
new file mode 100644
index 000000000000..95b554be25b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/silead,gsl1680.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silead GSL1680 Touchscreen Controller
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - silead,gsl1680
+      - silead,gsl1688
+      - silead,gsl3670
+      - silead,gsl3675
+      - silead,gsl3692
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  power-gpios:
+    maxItems: 1
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: >
+      File basename for board specific firmware
+
+  silead,max-fingers:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 5
+    description: >
+      Maximum number of fingers the touchscreen can detect
+
+  silead,home-button:
+    type: boolean
+    description: >
+      Does the device have a capacitive home-button build into the
+      touchscreen?
+
+  avdd-supply:
+    description: >
+      Regulator phandle for controller AVDD
+
+  vddio-supply:
+    description: >
+      Regulator phandle for controller VDDIO
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - power-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@40 {
+            compatible = "silead,gsl1680";
+            reg = <0x40>;
+            interrupt-parent = <&pio>;
+            interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
+            power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
+            touchscreen-size-x = <480>;
+            touchscreen-size-y = <800>;
+            touchscreen-inverted-x;
+            touchscreen-swapped-x-y;
+            silead,max-fingers = <5>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt b/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
deleted file mode 100644
index d67e558e5ab5..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* GSL 1680 touchscreen controller
-
-Required properties:
-- compatible		  : Must be one of the following, depending on the model:
-			    "silead,gsl1680"
-			    "silead,gsl1688"
-			    "silead,gsl3670"
-			    "silead,gsl3675"
-			    "silead,gsl3692"
-- reg			  : I2C slave address of the chip (0x40)
-- interrupts		  : interrupt specification for the gsl1680 interrupt
-- power-gpios		  : Specification for the pin connected to the gsl1680's
-			    shutdown input. This needs to be driven high to take the
-			    gsl1680 out of its low power state
-- touchscreen-size-x	  : See touchscreen.txt
-- touchscreen-size-y	  : See touchscreen.txt
-
-Optional properties:
-- firmware-name		  : File basename (string) for board specific firmware
-- touchscreen-inverted-x  : See touchscreen.txt
-- touchscreen-inverted-y  : See touchscreen.txt
-- touchscreen-swapped-x-y : See touchscreen.txt
-- silead,max-fingers	  : maximum number of fingers the touchscreen can detect
-- silead,home-button	  : Boolean, set to true on devices which have a
-			    capacitive home-button build into the touchscreen
-- vddio-supply		  : regulator phandle for controller VDDIO
-- avdd-supply		  : regulator phandle for controller AVDD
-
-Example:
-
-i2c@00000000 {
-	gsl1680: touchscreen@40 {
-		compatible = "silead,gsl1680";
-		reg = <0x40>;
-		interrupt-parent = <&pio>;
-		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>;
-		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
-		touchscreen-size-x = <480>;
-		touchscreen-size-y = <800>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-		silead,max-fingers = <5>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
deleted file mode 100644
index 0a5d0cb4a280..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* ST-Microelectronics FingerTip touchscreen controller
-
-The ST-Microelectronics FingerTip device provides a basic touchscreen
-functionality. Along with it the user can enable the touchkey which can work as
-a basic HOME and BACK key for phones.
-
-The driver supports also hovering as an absolute single touch event with x, y, z
-coordinates.
-
-Required properties:
-- compatible		: must be "st,stmfts"
-- reg			: I2C slave address, (e.g. 0x49)
-- interrupts		: interrupt specification
-- avdd-supply		: analogic power supply
-- vdd-supply		: power supply
-- touchscreen-size-x	: see touchscreen.txt
-- touchscreen-size-y	: see touchscreen.txt
-
-Optional properties:
-- touch-key-connected	: specifies whether the touchkey feature is connected
-- ledvdd-supply		: power supply to the touch key leds
-
-Example:
-
-i2c@00000000 {
-
-	/* ... */
-
-	touchscreen@49 {
-		compatible = "st,stmfts";
-		reg = <0x49>;
-		interrupt-parent = <&gpa1>;
-		interrupts = <1 IRQ_TYPE_NONE>;
-		touchscreen-size-x = <1599>;
-		touchscreen-size-y = <2559>;
-		touch-key-connected;
-		avdd-supply = <&ldo30_reg>;
-		vdd-supply = <&ldo31_reg>;
-		ledvdd-supply = <&ldo33_reg>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml
new file mode 100644
index 000000000000..c593ae63d0ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/st,stmfts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Microelectronics FingerTip touchscreen controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  The ST-Microelectronics FingerTip device provides a basic touchscreen
+  functionality. Along with it the user can enable the touchkey which can work
+  as a basic HOME and BACK key for phones.
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: st,stmfts
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analogic power supply
+
+  interrupts:
+    maxItems: 1
+
+  ledvdd-supply:
+    description: Power supply to the touch key leds
+
+  touch-key-connected:
+    type: boolean
+    description: The touchkey feature is connected
+
+  vdd-supply:
+    description: Power supply
+
+required:
+  - compatible
+  - reg
+  - avdd-supply
+  - interrupts
+  - vdd-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@49 {
+            compatible = "st,stmfts";
+            reg = <0x49>;
+            interrupt-parent = <&gpa1>;
+            interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+            touchscreen-size-x = <1599>;
+            touchscreen-size-y = <2559>;
+            touch-key-connected;
+            avdd-supply = <&ldo30_reg>;
+            vdd-supply = <&ldo31_reg>;
+            ledvdd-supply = <&ldo33_reg>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
index c549924603d2..238b51555c04 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt
@@ -54,8 +54,7 @@ Optional properties common with MFD (deprecated):
 				1 -> 3.25 MHz
 				2 || 3 -> 6.5 MHz
 
-Node name must be stmpe_touchscreen and should be child node of stmpe node to
-which it belongs.
+Node should be child node of stmpe node to which it belongs.
 
 Note that common ADC settings of stmpe_touchscreen (child) will take precedence
 over the settings done in MFD.
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml
new file mode 100644
index 000000000000..e44cc65abc8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,am3359-tsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 Touchscreen controller
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    const: ti,am3359-tsc
+
+  ti,wires:
+    description: Wires refer to application modes i.e. 4/5/8 wire touchscreen
+      support on the platform.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [4, 5, 8]
+
+  ti,x-plate-resistance:
+    description: X plate resistance
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,coordinate-readouts:
+    description: The sequencer supports a total of 16 programmable steps. Each
+      step is used to read a single coordinate. A single readout is enough but
+      multiple reads can increase the quality. A value of 5 means, 5 reads for
+      X, 5 for Y and 2 for Z (always). This utilises 12 of the 16 software steps
+      available. The remaining 4 can be used by the ADC.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 6
+
+  ti,wire-config:
+    description: Different boards could have a different order for connecting
+      wires on touchscreen. We need to provide an 8-bit number where the
+      first four bits represent the analog lines and the next 4 bits represent
+      positive/negative terminal on that input line. Notations to represent the
+      input lines and terminals respectively are as follows, AIN0 = 0, AIN1 = 1
+      and so on until AIN7 = 7. XP = 0, XN = 1, YP = 2, YN = 3.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 4
+    maxItems: 8
+
+  ti,charge-delay:
+    description: Length of touch screen charge delay step in terms of ADC clock
+      cycles. Charge delay value should be large in order to avoid false pen-up
+      events. This value effects the overall sampling speed, hence need to be
+      kept as low as possible, while avoiding false pen-up event. Start from a
+      lower value, say 0x400, and increase value until false pen-up events are
+      avoided. The pen-up detection happens immediately after the charge step,
+      so this does in fact function as a hardware knob for adjusting the amount
+      of "settling time".
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - ti,wires
+  - ti,x-plate-resistance
+  - ti,coordinate-readouts
+  - ti,wire-config
+
+additionalProperties: false
+
+examples:
+  - |
+    tsc {
+        compatible = "ti,am3359-tsc";
+        ti,wires = <4>;
+        ti,x-plate-resistance = <200>;
+        ti,coordinate-readouts = <5>;
+        ti,wire-config = <0x00 0x11 0x22 0x33>;
+        ti,charge-delay = <0x400>;
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
index 938aab016cc2..7187c390b2f5 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments TSC2004 and TSC2005 touchscreen controller bindings
+title: Texas Instruments TSC2004 and TSC2005 touchscreen controller
 
 maintainers:
   - Marek Vasut <marex@denx.de>
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt b/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
deleted file mode 100644
index aad5e34965eb..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-* TI - TSC ADC (Touschscreen and analog digital converter)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-Required properties:
-- mfd
-	compatible: Should be
-		"ti,am3359-tscadc" for AM335x/AM437x SoCs
-		"ti,am654-tscadc", "ti,am3359-tscadc" for AM654 SoCs
-- child "tsc"
-	compatible: Should be "ti,am3359-tsc".
-	ti,wires: Wires refer to application modes i.e. 4/5/8 wire touchscreen
-		  support on the platform.
-	ti,x-plate-resistance: X plate resistance
-	ti,coordinate-readouts: The sequencer supports a total of 16
-				programmable steps each step is used to
-				read a single coordinate. A single
-                                readout is enough but multiple reads can
-				increase the quality.
-				A value of 5 means, 5 reads for X, 5 for
-				Y and 2 for Z (always). This utilises 12
-				of the 16 software steps available. The
-				remaining 4 can be used by the ADC.
-	ti,wire-config: Different boards could have a different order for
-			connecting wires on touchscreen. We need to provide an
-			8 bit number where in the 1st four bits represent the
-			analog lines and the next 4 bits represent positive/
-			negative terminal on that input line. Notations to
-			represent the input lines and terminals resoectively
-			is as follows:
-			AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
-			XP  = 0, XN = 1, YP = 2, YN = 3.
-- child "adc"
-	compatible: Should be
-		    "ti,am3359-adc" for AM335x/AM437x SoCs
-		    "ti,am654-adc", "ti,am3359-adc" for AM654 SoCs
-	ti,adc-channels: List of analog inputs available for ADC.
-			 AIN0 = 0, AIN1 = 1 and so on till AIN7 = 7.
-
-Optional properties:
-- child "tsc"
-	ti,charge-delay: Length of touch screen charge delay step in terms of
-			 ADC clock cycles. Charge delay value should be large
-			 in order to avoid false pen-up events. This value
-			 effects the overall sampling speed, hence need to be
-			 kept as low as possible, while avoiding false pen-up
-			 event. Start from a lower value, say 0x400, and
-			 increase value until false pen-up events are avoided.
-			 The pen-up detection happens immediately after the
-			 charge step, so this does in fact function as a
-			 hardware knob for adjusting the amount of "settling
-			 time".
-
-- child "adc"
-	ti,chan-step-opendelay: List of open delays for each channel of
-				ADC in the order of ti,adc-channels. The
-				value corresponds to the number of ADC
-				clock cycles to wait after applying the
-				step configuration registers and before
-				sending the start of ADC conversion.
-				Maximum value is 0x3FFFF.
-       ti,chan-step-sampledelay: List of sample delays for each channel
-				  of ADC in the order of ti,adc-channels.
-				  The value corresponds to the number of
-				  ADC clock cycles to sample (to hold
-				  start of conversion high).
-				  Maximum value is 0xFF.
-       ti,chan-step-avg: Number of averages to be performed for each
-			  channel of ADC. If average is 16 then input
-			  is sampled 16 times and averaged to get more
-			  accurate value. This increases the time taken
-			  by ADC to generate a sample. Valid range is 0
-			  average to 16 averages. Maximum value is 16.
-
-Example:
-	tscadc: tscadc@44e0d000 {
-		compatible = "ti,am3359-tscadc";
-		tsc {
-			ti,wires = <4>;
-			ti,x-plate-resistance = <200>;
-			ti,coordiante-readouts = <5>;
-			ti,wire-config = <0x00 0x11 0x22 0x33>;
-			ti,charge-delay = <0x400>;
-		};
-
-		adc {
-			ti,adc-channels = <4 5 6 7>;
-			ti,chan-step-opendelay = <0x098 0x3ffff 0x098 0x0>;
-			ti,chan-step-sampledelay = <0xff 0x0 0xf 0x0>;
-			ti,chan-step-avg = <16 2 4 8>;
-		};
-	}
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
index 4b5b212c772c..895592da9626 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/input/touchscreen/touchscreen.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common touchscreen Bindings
+title: Common touchscreen
 
 maintainers:
   - Dmitry Torokhov <dmitry.torokhov@gmail.com>
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
new file mode 100644
index 000000000000..b1507463a03e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/zinitix,bt400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zinitix BT4xx and BT5xx series touchscreen controller
+
+description: The Zinitix BT4xx and BT5xx series of touchscreen controllers
+  are Korea-produced touchscreens with embedded microcontrollers. The
+  BT4xx series was produced 2010-2013 and the BT5xx series 2013-2014.
+
+maintainers:
+  - Michael Srba <Michael.Srba@seznam.cz>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  $nodename:
+    pattern: "^touchscreen(@.*)?$"
+
+  compatible:
+    enum:
+      - zinitix,bt402
+      - zinitix,bt403
+      - zinitix,bt404
+      - zinitix,bt412
+      - zinitix,bt413
+      - zinitix,bt431
+      - zinitix,bt432
+      - zinitix,bt531
+      - zinitix,bt532
+      - zinitix,bt538
+      - zinitix,bt541
+      - zinitix,bt548
+      - zinitix,bt554
+      - zinitix,at100
+
+  reg:
+    description: I2C address on the I2C bus
+
+  clock-frequency:
+    description: I2C client clock frequency, defined for host when using
+      the device on the I2C bus
+    minimum: 0
+    maximum: 400000
+
+  interrupts:
+    description: Interrupt to host
+    maxItems: 1
+
+  vcca-supply:
+    description: Analog power supply regulator on the VCCA pin
+
+  vdd-supply:
+    description: Digital power supply regulator on the VDD pin.
+      In older device trees this can be the accidental name for the analog
+      supply on the VCCA pin, and in that case the deprecated vddo-supply is
+      used for the digital power supply.
+
+  vddo-supply:
+    description: Deprecated name for the digital power supply, use vdd-supply
+      as this reflects the real name of the pin. If this supply is present,
+      the vdd-supply represents VCCA instead of VDD. Implementers should first
+      check for this property, and if it is present assume that the vdd-supply
+      represents the analog supply.
+    deprecated: true
+
+  reset-gpios:
+    description: Reset line for the touchscreen, should be tagged
+      as GPIO_ACTIVE_LOW
+
+  zinitix,mode:
+    description: Mode of reporting touch points. Some modes may not work
+      with a particular ts firmware for unknown reasons. Available modes are
+      1 and 2. Mode 2 is the default and preferred.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      touchscreen@20 {
+        compatible = "zinitix,bt541";
+        reg = <0x20>;
+        interrupt-parent = <&gpio>;
+        interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+        vcca-supply = <&reg_vcca_tsp>;
+        vdd-supply = <&reg_vdd_tsp>;
+        touchscreen-size-x = <540>;
+        touchscreen-size-y = <960>;
+        zinitix,mode = <2>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt b/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt
deleted file mode 100644
index 446efb9f5f55..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/zinitix.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-Device tree bindings for Zinitx BT541 touchscreen controller
-
-Required properties:
-
- - compatible		: Should be "zinitix,bt541"
- - reg			: I2C address of the chip. Should be 0x20
- - interrupts		: Interrupt to which the chip is connected
-
-Optional properties:
-
- - vdd-supply		: Analog power supply regulator on VCCA pin
- - vddo-supply		: Digital power supply regulator on VDD pin
- - zinitix,mode		: Mode of reporting touch points. Some modes may not work
-			  with a particular ts firmware for unknown reasons. Available
-			  modes are 1 and 2. Mode 2 is the default and preferred.
-
-The touchscreen-* properties are documented in touchscreen.txt in this
-directory.
-
-Example:
-
-	i2c@00000000 {
-		/* ... */
-
-		bt541@20 {
-			compatible = "zinitix,bt541";
-			reg = <0x20>;
-			interrupt-parent = <&msmgpio>;
-			interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&tsp_default>;
-			vdd-supply = <&reg_vdd_tsp>;
-			vddo-supply = <&pm8916_l6>;
-			touchscreen-size-x = <540>;
-			touchscreen-size-y = <960>;
-			zinitix,mode = <2>;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
index b8204ed22dd5..f7a5e31c506e 100644
--- a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
+++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Generic i.MX bus frequency device
 
 maintainers:
-  - Leonard Crestez <leonard.crestez@nxp.com>
+  - Peng Fan <peng.fan@nxp.com>
 
 description: |
   The i.MX SoC family has multiple buses for which clock frequency (and
@@ -26,14 +26,16 @@ properties:
     oneOf:
       - items:
           - enum:
-              - fsl,imx8mn-nic
               - fsl,imx8mm-nic
+              - fsl,imx8mn-nic
+              - fsl,imx8mp-nic
               - fsl,imx8mq-nic
           - const: fsl,imx8m-nic
       - items:
           - enum:
-              - fsl,imx8mn-noc
               - fsl,imx8mm-noc
+              - fsl,imx8mn-noc
+              - fsl,imx8mp-noc
               - fsl,imx8mq-noc
           - const: fsl,imx8m-noc
       - const: fsl,imx8m-nic
@@ -45,7 +47,8 @@ properties:
     maxItems: 1
 
   operating-points-v2: true
-  opp-table: true
+  opp-table:
+    type: object
 
   fsl,ddrc:
     $ref: "/schemas/types.yaml#/definitions/phandle"
diff --git a/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
new file mode 100644
index 000000000000..58611ba2a0f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/mediatek,cci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Cache Coherent Interconnect (CCI) frequency and voltage scaling
+
+maintainers:
+  - Jia-Wei Chang <jia-wei.chang@mediatek.com>
+  - Johnson Wang <johnson.wang@mediatek.com>
+
+description: |
+  MediaTek Cache Coherent Interconnect (CCI) is a hardware engine used by
+  MT8183 and MT8186 SoCs to scale the frequency and adjust the voltage in
+  hardware. It can also optimize the voltage to reduce the power consumption.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-cci
+      - mediatek,mt8186-cci
+
+  clocks:
+    items:
+      - description:
+          The multiplexer for clock input of the bus.
+      - description:
+          A parent of "bus" clock which is used as an intermediate clock source
+          when the original clock source (PLL) is under transition and not
+          stable yet.
+
+  clock-names:
+    items:
+      - const: cci
+      - const: intermediate
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  proc-supply:
+    description:
+      Phandle of the regulator for CCI that provides the supply voltage.
+
+  sram-supply:
+    description:
+      Phandle of the regulator for sram of CCI that provides the supply
+      voltage. When it is present, the implementation needs to do
+      "voltage tracking" to step by step scale up/down Vproc and Vsram to fit
+      SoC specific needs. When absent, the voltage scaling flow is handled by
+      hardware, hence no software "voltage tracking" is needed.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - operating-points-v2
+  - proc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    cci: cci {
+        compatible = "mediatek,mt8183-cci";
+        clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+                 <&topckgen CLK_TOP_ARMPLL_DIV_PLL1>;
+        clock-names = "cci", "intermediate";
+        operating-points-v2 = <&cci_opp>;
+        proc-supply = <&mt6358_vproc12_reg>;
+    };
+
+    cci_opp: opp-table-cci {
+        compatible = "operating-points-v2";
+        opp-shared;
+        opp2_00: opp-273000000 {
+            opp-hz = /bits/ 64 <273000000>;
+            opp-microvolt = <650000>;
+        };
+        opp2_01: opp-338000000 {
+            opp-hz = /bits/ 64 <338000000>;
+            opp-microvolt = <687500>;
+        };
+        opp2_02: opp-403000000 {
+            opp-hz = /bits/ 64 <403000000>;
+            opp-microvolt = <718750>;
+        };
+        opp2_03: opp-463000000 {
+            opp-hz = /bits/ 64 <463000000>;
+            opp-microvolt = <756250>;
+        };
+        opp2_04: opp-546000000 {
+            opp-hz = /bits/ 64 <546000000>;
+            opp-microvolt = <800000>;
+        };
+        opp2_05: opp-624000000 {
+            opp-hz = /bits/ 64 <624000000>;
+            opp-microvolt = <818750>;
+        };
+        opp2_06: opp-689000000 {
+            opp-hz = /bits/ 64 <689000000>;
+            opp-microvolt = <850000>;
+        };
+        opp2_07: opp-767000000 {
+            opp-hz = /bits/ 64 <767000000>;
+            opp-microvolt = <868750>;
+        };
+        opp2_08: opp-845000000 {
+            opp-hz = /bits/ 64 <845000000>;
+            opp-microvolt = <893750>;
+        };
+        opp2_09: opp-871000000 {
+            opp-hz = /bits/ 64 <871000000>;
+            opp-microvolt = <906250>;
+        };
+        opp2_10: opp-923000000 {
+            opp-hz = /bits/ 64 <923000000>;
+            opp-microvolt = <931250>;
+        };
+        opp2_11: opp-962000000 {
+            opp-hz = /bits/ 64 <962000000>;
+            opp-microvolt = <943750>;
+        };
+        opp2_12: opp-1027000000 {
+            opp-hz = /bits/ 64 <1027000000>;
+            opp-microvolt = <975000>;
+        };
+        opp2_13: opp-1092000000 {
+            opp-hz = /bits/ 64 <1092000000>;
+            opp-microvolt = <1000000>;
+        };
+        opp2_14: opp-1144000000 {
+            opp-hz = /bits/ 64 <1144000000>;
+            opp-microvolt = <1025000>;
+        };
+        opp2_15: opp-1196000000 {
+            opp-hz = /bits/ 64 <1196000000>;
+            opp-microvolt = <1050000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
index e23df4836c6f..eec987640b37 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,bcm-voter.yaml
@@ -45,20 +45,20 @@ additionalProperties: false
 
 examples:
   # Example 1: apps bcm_voter on SDM845 SoC should be defined inside &apps_rsc node
-  # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+  # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
   - |
 
-    apps_bcm_voter: bcm_voter {
+    apps_bcm_voter: bcm-voter {
         compatible = "qcom,bcm-voter";
     };
 
   # Example 2: disp bcm_voter on SDM845 should be defined inside &disp_rsc node
-  # as defined in Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
+  # as defined in Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
   - |
 
     #include <dt-bindings/interconnect/qcom,icc.h>
 
-    disp_bcm_voter: bcm_voter {
+    disp_bcm_voter: bcm-voter {
         compatible = "qcom,bcm-voter";
         qcom,tcs-wait = <QCOM_ICC_TAG_AMC>;
     };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
new file mode 100644
index 000000000000..5d17bdcfdf70
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,msm8998-bwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Interconnect Bandwidth Monitor
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  Bandwidth Monitor measures current throughput on buses between various NoC
+  fabrics and provides information when it crosses configured thresholds.
+
+  Certain SoCs might have more than one Bandwidth Monitors, for example on SDM845::
+   - Measuring the bandwidth between CPUs and Last Level Cache Controller -
+     called just BWMON,
+   - Measuring the bandwidth between Last Level Cache Controller and memory
+     (DDR) - called LLCC BWMON.
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,msm8998-bwmon       # BWMON v4
+      - items:
+          - enum:
+              - qcom,sc7280-cpu-bwmon
+              - qcom,sc8280xp-cpu-bwmon
+              - qcom,sdm845-cpu-bwmon
+              - qcom,sm8550-cpu-bwmon
+          - const: qcom,sdm845-bwmon    # BWMON v4, unified register space
+      - items:
+          - enum:
+              - qcom,sc8280xp-llcc-bwmon
+              - qcom,sm8550-llcc-bwmon
+          - const: qcom,sc7280-llcc-bwmon
+      - const: qcom,sc7280-llcc-bwmon   # BWMON v5
+      - const: qcom,sdm845-llcc-bwmon   # BWMON v5
+
+  interconnects:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  reg:
+    # BWMON v5 uses one register address space, v1-v4 use one or two.
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - interconnects
+  - interrupts
+  - operating-points-v2
+  - opp-table
+  - reg
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: qcom,msm8998-bwmon
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+        reg-names:
+          items:
+            - const: monitor
+            - const: global
+
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+        reg-names:
+          maxItems: 1
+
+examples:
+  - |
+    #include <dt-bindings/interconnect/qcom,sdm845.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmu@1436400 {
+        compatible = "qcom,sdm845-cpu-bwmon", "qcom,sdm845-bwmon";
+        reg = <0x01436400 0x600>;
+        interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+        interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>;
+
+        operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+        cpu_bwmon_opp_table: opp-table {
+            compatible = "operating-points-v2";
+            opp-0 {
+                opp-peak-kBps = <4800000>;
+            };
+            opp-1 {
+                opp-peak-kBps = <9216000>;
+            };
+            opp-2 {
+                opp-peak-kBps = <15052800>;
+            };
+            opp-3 {
+                opp-peak-kBps = <20889600>;
+            };
+            opp-4 {
+                opp-peak-kBps = <25497600>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
index e701524ee811..9d0a98d77ae9 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Operating State Manager (OSM) L3 Interconnect Provider
 
 maintainers:
-  - Sibi Sankar <sibis@codeaurora.org>
+  - Sibi Sankar <quic_sibis@quicinc.com>
 
 description:
   L3 cache bandwidth requirements on Qualcomm SoCs is serviced by the OSM.
@@ -16,12 +16,23 @@ description:
 
 properties:
   compatible:
-    enum:
-      - qcom,sc7180-osm-l3
-      - qcom,sc8180x-osm-l3
-      - qcom,sdm845-osm-l3
-      - qcom,sm8150-osm-l3
-      - qcom,sm8250-epss-l3
+    oneOf:
+      - items:
+          - enum:
+              - qcom,sc7180-osm-l3
+              - qcom,sc8180x-osm-l3
+              - qcom,sdm845-osm-l3
+              - qcom,sm6350-osm-l3
+              - qcom,sm8150-osm-l3
+          - const: qcom,osm-l3
+      - items:
+          - enum:
+              - qcom,sc7280-epss-l3
+              - qcom,sc8280xp-epss-l3
+              - qcom,sm6375-cpucp-l3
+              - qcom,sm8250-epss-l3
+              - qcom,sm8350-epss-l3
+          - const: qcom,epss-l3
 
   reg:
     maxItems: 1
@@ -55,7 +66,7 @@ examples:
     #define RPMH_CXO_CLK        0
 
     osm_l3: interconnect@17d41000 {
-      compatible = "qcom,sdm845-osm-l3";
+      compatible = "qcom,sdm845-osm-l3", "qcom,osm-l3";
       reg = <0x17d41000 0x1400>;
 
       clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
new file mode 100644
index 000000000000..f65a2fe846de
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qcm2290.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qcm2290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCM2290 Network-On-Chip interconnect
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The Qualcomm QCM2290 interconnect providers support adjusting the
+  bandwidth requirements between the various NoC fabrics.
+
+properties:
+  reg:
+    maxItems: 1
+
+  compatible:
+    enum:
+      - qcom,qcm2290-bimc
+      - qcom,qcm2290-cnoc
+      - qcom,qcm2290-snoc
+
+  '#interconnect-cells':
+    const: 1
+
+  clock-names:
+    items:
+      - const: bus
+      - const: bus_a
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Bus A Clock
+
+# Child node's properties
+patternProperties:
+  '^interconnect-[a-z0-9]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+
+    properties:
+      compatible:
+        enum:
+          - qcom,qcm2290-qup-virt
+          - qcom,qcm2290-mmrt-virt
+          - qcom,qcm2290-mmnrt-virt
+
+      '#interconnect-cells':
+        const: 1
+
+      clock-names:
+        items:
+          - const: bus
+          - const: bus_a
+
+      clocks:
+        items:
+          - description: Bus Clock
+          - description: Bus A Clock
+
+    required:
+      - compatible
+      - '#interconnect-cells'
+      - clock-names
+      - clocks
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#interconnect-cells'
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+
+    snoc: interconnect@1880000 {
+        compatible = "qcom,qcm2290-snoc";
+        reg = <0x01880000 0x60200>;
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+                 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+
+        qup_virt: interconnect-qup {
+            compatible = "qcom,qcm2290-qup-virt";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_QUP_CLK>,
+                     <&rpmcc RPM_SMD_QUP_A_CLK>;
+        };
+
+        mmnrt_virt: interconnect-mmnrt {
+            compatible = "qcom,qcm2290-mmnrt-virt";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_MMNRT_CLK>,
+                     <&rpmcc RPM_SMD_MMNRT_A_CLK>;
+        };
+
+        mmrt_virt: interconnect-mmrt {
+            compatible = "qcom,qcm2290-mmrt-virt";
+            #interconnect-cells = <1>;
+            clock-names = "bus", "bus_a";
+            clocks = <&rpmcc RPM_SMD_MMRT_CLK>,
+                     <&rpmcc RPM_SMD_MMRT_A_CLK>;
+        };
+    };
+
+    cnoc: interconnect@1900000 {
+        compatible = "qcom,qcm2290-cnoc";
+        reg = <0x01900000 0x8200>;
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
+                 <&rpmcc RPM_SMD_CNOC_A_CLK>;
+    };
+
+    bimc: interconnect@4480000 {
+        compatible = "qcom,qcm2290-bimc";
+        reg = <0x04480000 0x80000>;
+        #interconnect-cells = <1>;
+        clock-names = "bus", "bus_a";
+        clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+                 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml
new file mode 100644
index 000000000000..0070b0396e31
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qdu1000-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on QDU1000
+
+maintainers:
+  - Georgi Djakov <djakov@kernel.org>
+  - Odelu Kukatla <quic_okukatla@quicinc.com>
+
+description: |
+   RPMh interconnect providers support system bandwidth requirements through
+   RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+   able to communicate with the BCM through the Resource State Coordinator (RSC)
+   associated with each execution environment. Provider nodes must point to at
+   least one RPMh device child node pertaining to their RSC and each provider
+   can map to multiple RPMh resources.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qdu1000-clk-virt
+      - qcom,qdu1000-gem-noc
+      - qcom,qdu1000-mc-virt
+      - qcom,qdu1000-system-noc
+
+  '#interconnect-cells': true
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qdu1000-clk-virt
+              - qcom,qdu1000-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
+
+    system_noc: interconnect@1640000 {
+        compatible = "qcom,qdu1000-system-noc";
+        reg = <0x1640000 0x45080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    clk_virt: interconnect-0 {
+        compatible = "qcom,qdu1000-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
index 983d71fb5399..4f95d512012a 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
@@ -26,23 +26,73 @@ properties:
       - qcom,msm8939-bimc
       - qcom,msm8939-pcnoc
       - qcom,msm8939-snoc
-      - qcom,msm8939-snoc-mm
+      - qcom,msm8996-a0noc
+      - qcom,msm8996-a1noc
+      - qcom,msm8996-a2noc
+      - qcom,msm8996-bimc
+      - qcom,msm8996-cnoc
+      - qcom,msm8996-mnoc
+      - qcom,msm8996-pnoc
+      - qcom,msm8996-snoc
       - qcom,qcs404-bimc
       - qcom,qcs404-pcnoc
       - qcom,qcs404-snoc
+      - qcom,sdm660-a2noc
+      - qcom,sdm660-bimc
+      - qcom,sdm660-cnoc
+      - qcom,sdm660-gnoc
+      - qcom,sdm660-mnoc
+      - qcom,sdm660-snoc
 
   '#interconnect-cells':
-    const: 1
+    description: |
+      Value: <1> is one cell in an interconnect specifier for the
+      interconnect node id, <2> requires the interconnect node id and an
+      extra path tag.
+    enum: [ 1, 2 ]
+
+  clocks:
+    minItems: 2
+    maxItems: 7
 
   clock-names:
-    items:
-      - const: bus
-      - const: bus_a
+    minItems: 2
+    maxItems: 7
 
-  clocks:
-    items:
-      - description: Bus Clock
-      - description: Bus A Clock
+  power-domains:
+    maxItems: 1
+
+# Child node's properties
+patternProperties:
+  '^interconnect-[a-z0-9]+$':
+    type: object
+    additionalProperties: false
+    description:
+      snoc-mm is a child of snoc, sharing snoc's register address space.
+
+    properties:
+      compatible:
+        enum:
+          - qcom,msm8939-snoc-mm
+
+      '#interconnect-cells':
+        const: 1
+
+      clock-names:
+        items:
+          - const: bus
+          - const: bus_a
+
+      clocks:
+        items:
+          - description: Bus Clock
+          - description: Bus A Clock
+
+    required:
+      - compatible
+      - '#interconnect-cells'
+      - clock-names
+      - clocks
 
 required:
   - compatible
@@ -53,6 +103,152 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8916-bimc
+              - qcom,msm8916-pcnoc
+              - qcom,msm8916-snoc
+              - qcom,msm8939-bimc
+              - qcom,msm8939-pcnoc
+              - qcom,msm8939-snoc
+              - qcom,msm8996-a1noc
+              - qcom,msm8996-bimc
+              - qcom,msm8996-cnoc
+              - qcom,msm8996-pnoc
+              - qcom,msm8996-snoc
+              - qcom,qcs404-bimc
+              - qcom,qcs404-pcnoc
+              - qcom,qcs404-snoc
+              - qcom,sdm660-bimc
+              - qcom,sdm660-cnoc
+              - qcom,sdm660-gnoc
+              - qcom,sdm660-snoc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+
+        clocks:
+          items:
+            - description: Bus Clock
+            - description: Bus A Clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-mnoc
+              - qcom,sdm660-mnoc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+            - const: iface
+
+        clocks:
+          items:
+            - description: Bus Clock.
+            - description: Bus A Clock.
+            - description: CPU-NoC High-performance Bus Clock.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-a0noc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: aggre0_snoc_axi
+            - const: aggre0_cnoc_ahb
+            - const: aggre0_noc_mpu_cfg
+
+        clocks:
+          items:
+            - description: Aggregate0 System NoC AXI Clock.
+            - description: Aggregate0 Config NoC AHB Clock.
+            - description: Aggregate0 NoC MPU Clock.
+
+      required:
+        - power-domains
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-a2noc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+            - const: aggre2_ufs_axi
+            - const: ufs_axi
+
+        clocks:
+          items:
+            - description: Bus Clock
+            - description: Bus A Clock
+            - description: Aggregate2 NoC UFS AXI Clock
+            - description: UFS AXI Clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm660-a2noc
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+            - const: ipa
+            - const: ufs_axi
+            - const: aggre2_ufs_axi
+            - const: aggre2_usb3_axi
+            - const: cfg_noc_usb2_axi
+
+        clocks:
+          items:
+            - description: Bus Clock.
+            - description: Bus A Clock.
+            - description: IPA Clock.
+            - description: UFS AXI Clock.
+            - description: Aggregate2 UFS AXI Clock.
+            - description: Aggregate2 USB3 AXI Clock.
+            - description: Config NoC USB2 AXI Clock.
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,msm8939-snoc
+    then:
+      patternProperties:
+        '^interconnect-[a-z0-9]+$': false
+
 examples:
   - |
       #include <dt-bindings/clock/qcom,rpmcc.h>
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml
new file mode 100644
index 000000000000..bbeb0541536b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh-common.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,rpmh-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect
+
+maintainers:
+  - Georgi Djakov <djakov@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+properties:
+  '#interconnect-cells':
+    enum: [ 1, 2 ]
+
+  qcom,bcm-voters:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    maxItems: 2
+    description:
+      List of phandles to qcom,bcm-voter nodes that are required by
+      this interconnect to send RPMh commands.
+
+  qcom,bcm-voter-names:
+    maxItems: 2
+    description:
+      Names for each of the qcom,bcm-voters specified.
+
+required:
+  - '#interconnect-cells'
+  - qcom,bcm-voters
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index 3fd1a134162d..4d93ad415e0b 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -18,6 +18,9 @@ description: |
    least one RPMh device child node pertaining to their RSC and each provider
    can map to multiple RPMh resources.
 
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
 properties:
   reg:
     maxItems: 1
@@ -31,24 +34,11 @@ properties:
       - qcom,sc7180-config-noc
       - qcom,sc7180-dc-noc
       - qcom,sc7180-gem-noc
-      - qcom,sc7180-ipa-virt
       - qcom,sc7180-mc-virt
       - qcom,sc7180-mmss-noc
       - qcom,sc7180-npu-noc
       - qcom,sc7180-qup-virt
       - qcom,sc7180-system-noc
-      - qcom,sc7280-aggre1-noc
-      - qcom,sc7280-aggre2-noc
-      - qcom,sc7280-clk-virt
-      - qcom,sc7280-cnoc2
-      - qcom,sc7280-cnoc3
-      - qcom,sc7280-dc-noc
-      - qcom,sc7280-gem-noc
-      - qcom,sc7280-lpass-ag-noc
-      - qcom,sc7280-mc-virt
-      - qcom,sc7280-mmss-noc
-      - qcom,sc7280-nsp-noc
-      - qcom,sc7280-system-noc
       - qcom,sc8180x-aggre1-noc
       - qcom,sc8180x-aggre2-noc
       - qcom,sc8180x-camnoc-virt
@@ -56,10 +46,18 @@ properties:
       - qcom,sc8180x-config-noc
       - qcom,sc8180x-dc-noc
       - qcom,sc8180x-gem-noc
-      - qcom,sc8180x-ipa-virt
       - qcom,sc8180x-mc-virt
       - qcom,sc8180x-mmss-noc
+      - qcom,sc8180x-qup-virt
       - qcom,sc8180x-system-noc
+      - qcom,sdm670-aggre1-noc
+      - qcom,sdm670-aggre2-noc
+      - qcom,sdm670-config-noc
+      - qcom,sdm670-dc-noc
+      - qcom,sdm670-gladiator-noc
+      - qcom,sdm670-mem-noc
+      - qcom,sdm670-mmss-noc
+      - qcom,sdm670-system-noc
       - qcom,sdm845-aggre1-noc
       - qcom,sdm845-aggre2-noc
       - qcom,sdm845-config-noc
@@ -68,10 +66,12 @@ properties:
       - qcom,sdm845-mem-noc
       - qcom,sdm845-mmss-noc
       - qcom,sdm845-system-noc
-      - qcom,sdx55-ipa-virt
       - qcom,sdx55-mc-virt
       - qcom,sdx55-mem-noc
       - qcom,sdx55-system-noc
+      - qcom,sdx65-mc-virt
+      - qcom,sdx65-mem-noc
+      - qcom,sdx65-system-noc
       - qcom,sm8150-aggre1-noc
       - qcom,sm8150-aggre2-noc
       - qcom,sm8150-camnoc-noc
@@ -79,7 +79,6 @@ properties:
       - qcom,sm8150-config-noc
       - qcom,sm8150-dc-noc
       - qcom,sm8150-gem-noc
-      - qcom,sm8150-ipa-virt
       - qcom,sm8150-mc-virt
       - qcom,sm8150-mmss-noc
       - qcom,sm8150-system-noc
@@ -89,7 +88,6 @@ properties:
       - qcom,sm8250-config-noc
       - qcom,sm8250-dc-noc
       - qcom,sm8250-gem-noc
-      - qcom,sm8250-ipa-virt
       - qcom,sm8250-mc-virt
       - qcom,sm8250-mmss-noc
       - qcom,sm8250-npu-noc
@@ -105,26 +103,13 @@ properties:
       - qcom,sm8350-compute-noc
       - qcom,sm8350-system-noc
 
-  '#interconnect-cells':
-    enum: [ 1, 2 ]
-
-  qcom,bcm-voters:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
-    description: |
-      List of phandles to qcom,bcm-voter nodes that are required by
-      this interconnect to send RPMh commands.
-
-  qcom,bcm-voter-names:
-    description: |
-      Names for each of the qcom,bcm-voters specified.
+  '#interconnect-cells': true
 
 required:
   - compatible
   - reg
-  - '#interconnect-cells'
-  - qcom,bcm-voters
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml
new file mode 100644
index 000000000000..2e0c0bc7a376
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sa8775p-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SA8775P
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also:: include/dt-bindings/interconnect/qcom,sa8775p.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sa8775p-aggre1-noc
+      - qcom,sa8775p-aggre2-noc
+      - qcom,sa8775p-clk-virt
+      - qcom,sa8775p-config-noc
+      - qcom,sa8775p-dc-noc
+      - qcom,sa8775p-gem-noc
+      - qcom,sa8775p-gpdsp-anoc
+      - qcom,sa8775p-lpass-ag-noc
+      - qcom,sa8775p-mc-virt
+      - qcom,sa8775p-mmss-noc
+      - qcom,sa8775p-nspa-noc
+      - qcom,sa8775p-nspb-noc
+      - qcom,sa8775p-pcie-anoc
+      - qcom,sa8775p-system-noc
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    aggre1_noc: interconnect-aggre1-noc {
+        compatible = "qcom,sa8775p-aggre1-noc";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml
new file mode 100644
index 000000000000..b135597d9489
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sc7280-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SC7280
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also:: include/dt-bindings/interconnect/qcom,sc7280.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-aggre1-noc
+      - qcom,sc7280-aggre2-noc
+      - qcom,sc7280-clk-virt
+      - qcom,sc7280-cnoc2
+      - qcom,sc7280-cnoc3
+      - qcom,sc7280-dc-noc
+      - qcom,sc7280-gem-noc
+      - qcom,sc7280-lpass-ag-noc
+      - qcom,sc7280-mc-virt
+      - qcom,sc7280-mmss-noc
+      - qcom,sc7280-nsp-noc
+      - qcom,sc7280-system-noc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-clk-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interconnect {
+        compatible = "qcom,sc7280-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    interconnect@9100000 {
+        reg = <0x9100000 0xe2200>;
+        compatible = "qcom,sc7280-gem-noc";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sc8280xp-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sc8280xp-rpmh.yaml
new file mode 100644
index 000000000000..6c2da03f0cd2
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sc8280xp-rpmh.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sc8280xp-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SC8280XP
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also:: include/dt-bindings/interconnect/qcom,sc8280xp.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-aggre1-noc
+      - qcom,sc8280xp-aggre2-noc
+      - qcom,sc8280xp-clk-virt
+      - qcom,sc8280xp-config-noc
+      - qcom,sc8280xp-dc-noc
+      - qcom,sc8280xp-gem-noc
+      - qcom,sc8280xp-lpass-ag-noc
+      - qcom,sc8280xp-mc-virt
+      - qcom,sc8280xp-mmss-noc
+      - qcom,sc8280xp-nspa-noc
+      - qcom,sc8280xp-nspb-noc
+      - qcom,sc8280xp-system-noc
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interconnect-0 {
+        compatible = "qcom,sc8280xp-aggre1-noc";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml
deleted file mode 100644
index bcd41e491f1d..000000000000
--- a/Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml
+++ /dev/null
@@ -1,185 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/interconnect/qcom,sdm660.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm SDM660 Network-On-Chip interconnect
-
-maintainers:
-  - AngeloGioacchino Del Regno <kholk11@gmail.com>
-
-description: |
-  The Qualcomm SDM660 interconnect providers support adjusting the
-  bandwidth requirements between the various NoC fabrics.
-
-properties:
-  reg:
-    maxItems: 1
-
-  compatible:
-    enum:
-      - qcom,sdm660-a2noc
-      - qcom,sdm660-bimc
-      - qcom,sdm660-cnoc
-      - qcom,sdm660-gnoc
-      - qcom,sdm660-mnoc
-      - qcom,sdm660-snoc
-
-  '#interconnect-cells':
-    const: 1
-
-  clocks:
-    minItems: 1
-    maxItems: 7
-
-  clock-names:
-    minItems: 1
-    maxItems: 7
-
-required:
-  - compatible
-  - reg
-  - '#interconnect-cells'
-  - clock-names
-  - clocks
-
-additionalProperties: false
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdm660-mnoc
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Bus Clock.
-            - description: Bus A Clock.
-            - description: CPU-NoC High-performance Bus Clock.
-        clock-names:
-          items:
-            - const: bus
-            - const: bus_a
-            - const: iface
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdm660-a2noc
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Bus Clock.
-            - description: Bus A Clock.
-            - description: IPA Clock.
-            - description: UFS AXI Clock.
-            - description: Aggregate2 UFS AXI Clock.
-            - description: Aggregate2 USB3 AXI Clock.
-            - description: Config NoC USB2 AXI Clock.
-        clock-names:
-          items:
-            - const: bus
-            - const: bus_a
-            - const: ipa
-            - const: ufs_axi
-            - const: aggre2_ufs_axi
-            - const: aggre2_usb3_axi
-            - const: cfg_noc_usb2_axi
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdm660-bimc
-              - qcom,sdm660-cnoc
-              - qcom,sdm660-gnoc
-              - qcom,sdm660-snoc
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Bus Clock.
-            - description: Bus A Clock.
-        clock-names:
-          items:
-            - const: bus
-            - const: bus_a
-
-examples:
-  - |
-      #include <dt-bindings/clock/qcom,rpmcc.h>
-      #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
-      #include <dt-bindings/clock/qcom,gcc-sdm660.h>
-
-      bimc: interconnect@1008000 {
-              compatible = "qcom,sdm660-bimc";
-              reg = <0x01008000 0x78000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-                       <&rpmcc RPM_SMD_BIMC_A_CLK>;
-      };
-
-      cnoc: interconnect@1500000 {
-              compatible = "qcom,sdm660-cnoc";
-              reg = <0x01500000 0x10000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
-                       <&rpmcc RPM_SMD_CNOC_A_CLK>;
-      };
-
-      snoc: interconnect@1626000 {
-              compatible = "qcom,sdm660-snoc";
-              reg = <0x01626000 0x7090>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-                       <&rpmcc RPM_SMD_SNOC_A_CLK>;
-      };
-
-      a2noc: interconnect@1704000 {
-              compatible = "qcom,sdm660-a2noc";
-              reg = <0x01704000 0xc100>;
-              #interconnect-cells = <1>;
-              clock-names = "bus",
-                            "bus_a",
-                            "ipa",
-                            "ufs_axi",
-                            "aggre2_ufs_axi",
-                            "aggre2_usb3_axi",
-                            "cfg_noc_usb2_axi";
-              clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-                       <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
-                       <&rpmcc RPM_SMD_IPA_CLK>,
-                       <&gcc GCC_UFS_AXI_CLK>,
-                       <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
-                       <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
-                       <&gcc GCC_CFG_NOC_USB2_AXI_CLK>;
-      };
-
-      mnoc: interconnect@1745000 {
-              compatible = "qcom,sdm660-mnoc";
-              reg = <0x01745000 0xa010>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a", "iface";
-              clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
-                       <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
-                       <&mmcc AHB_CLK_SRC>;
-      };
-
-      gnoc: interconnect@17900000 {
-              compatible = "qcom,sdm660-gnoc";
-              reg = <0x17900000 0xe000>;
-              #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
-              clocks = <&xo_board>, <&xo_board>;
-      };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
new file mode 100644
index 000000000000..49eb156b08e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm6350-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6350 RPMh Network-On-Chip Interconnect
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description:
+  Qualcomm RPMh-based interconnect provider on SM6350.
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm6350-aggre1-noc
+      - qcom,sm6350-aggre2-noc
+      - qcom,sm6350-config-noc
+      - qcom,sm6350-dc-noc
+      - qcom,sm6350-gem-noc
+      - qcom,sm6350-mmss-noc
+      - qcom,sm6350-npu-noc
+      - qcom,sm6350-system-noc
+
+  reg:
+    maxItems: 1
+
+  '#interconnect-cells': true
+
+patternProperties:
+  '^interconnect-[a-z0-9\-]+$':
+    type: object
+    description:
+      The interconnect providers do not have a separate QoS register space,
+      but share parent's space.
+    $ref: qcom,rpmh-common.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - qcom,sm6350-clk-virt
+          - qcom,sm6350-compute-noc
+
+      '#interconnect-cells': true
+
+    required:
+      - compatible
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    config_noc: interconnect@1500000 {
+        compatible = "qcom,sm6350-config-noc";
+        reg = <0x01500000 0x28000>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    system_noc: interconnect@1620000 {
+        compatible = "qcom,sm6350-system-noc";
+        reg = <0x01620000 0x17080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+
+        clk_virt: interconnect-clk-virt {
+            compatible = "qcom,sm6350-clk-virt";
+            #interconnect-cells = <2>;
+            qcom,bcm-voters = <&apps_bcm_voter>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8450-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8450-rpmh.yaml
new file mode 100644
index 000000000000..3cff7e662255
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8450-rpmh.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm8450-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM8450
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also:: include/dt-bindings/interconnect/qcom,sm8450.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-aggre1-noc
+      - qcom,sm8450-aggre2-noc
+      - qcom,sm8450-clk-virt
+      - qcom,sm8450-config-noc
+      - qcom,sm8450-gem-noc
+      - qcom,sm8450-lpass-ag-noc
+      - qcom,sm8450-mc-virt
+      - qcom,sm8450-mmss-noc
+      - qcom,sm8450-nsp-noc
+      - qcom,sm8450-pcie-anoc
+      - qcom,sm8450-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-clk-virt
+              - qcom,sm8450-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe 0 AXI clock
+            - description: aggre-NOC PCIe 1 AXI clock
+            - description: aggre UFS PHY AXI clock
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-aggre1-noc
+              - qcom,sm8450-aggre2-noc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    interconnect-0 {
+        compatible = "qcom,sm8450-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    interconnect@1700000 {
+        compatible = "qcom,sm8450-aggre2-noc";
+        reg = <0x01700000 0x31080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+        clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+                 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+                 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+                 <&rpmhcc RPMH_IPA_CLK>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml
new file mode 100644
index 000000000000..716bd21f6041
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8550-rpmh.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm8550-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM8550
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+  able to communicate with the BCM through the Resource State Coordinator (RSC)
+  associated with each execution environment. Provider nodes must point to at
+  least one RPMh device child node pertaining to their RSC and each provider
+  can map to multiple RPMh resources.
+
+  See also:: include/dt-bindings/interconnect/qcom,sm8550-rpmh.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8550-aggre1-noc
+      - qcom,sm8550-aggre2-noc
+      - qcom,sm8550-clk-virt
+      - qcom,sm8550-cnoc-main
+      - qcom,sm8550-config-noc
+      - qcom,sm8550-gem-noc
+      - qcom,sm8550-lpass-ag-noc
+      - qcom,sm8550-lpass-lpiaon-noc
+      - qcom,sm8550-lpass-lpicx-noc
+      - qcom,sm8550-mc-virt
+      - qcom,sm8550-mmss-noc
+      - qcom,sm8550-nsp-noc
+      - qcom,sm8550-pcie-anoc
+      - qcom,sm8550-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-clk-virt
+              - qcom,sm8550-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-pcie-anoc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe AXI clock
+            - description: cfg-NOC PCIe a-NOC AHB clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8550-aggre1-noc
+              - qcom,sm8550-aggre2-noc
+              - qcom,sm8550-pcie-anoc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,sm8550-gcc.h>
+
+    clk_virt: interconnect-0 {
+      compatible = "qcom,sm8550-clk-virt";
+      #interconnect-cells = <2>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    aggre1_noc: interconnect@16e0000 {
+      compatible = "qcom,sm8550-aggre1-noc";
+      reg = <0x016e0000 0x14400>;
+      #interconnect-cells = <2>;
+      clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+               <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+      qcom,bcm-voters = <&apps_bcm_voter>;
+    };
diff --git a/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
new file mode 100644
index 000000000000..5e26e48c7217
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
@@ -0,0 +1,317 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/samsung,exynos-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Bus and Interconnect
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The Samsung Exynos SoC has many buses for data transfer between DRAM and
+  sub-blocks in SoC. Most Exynos SoCs share the common architecture for buses.
+  Generally, each bus of Exynos SoC includes a source clock and a power line,
+  which are able to change the clock frequency of the bus in runtime. To
+  monitor the usage of each bus in runtime, the driver uses the PPMU (Platform
+  Performance Monitoring Unit), which is able to measure the current load of
+  sub-blocks.
+
+  The Exynos SoC includes the various sub-blocks which have the each AXI bus.
+  The each AXI bus has the owned source clock but, has not the only owned power
+  line. The power line might be shared among one more sub-blocks.  So, we can
+  divide into two type of device as the role of each sub-block.  There are two
+  type of bus devices as following::
+   - parent bus device
+   - passive bus device
+
+  Basically, parent and passive bus device share the same power line.  The
+  parent bus device can only change the voltage of shared power line and the
+  rest bus devices (passive bus device) depend on the decision of the parent
+  bus device. If there are three blocks which share the VDD_xxx power line,
+  Only one block should be parent device and then the rest blocks should depend
+  on the parent device as passive device.
+
+    VDD_xxx |--- A block (parent)
+      |--- B block (passive)
+      |--- C block (passive)
+
+  There are a little different composition among Exynos SoC because each Exynos
+  SoC has different sub-blocks. Therefore, such difference should be specified
+  in devicetree file instead of each device driver. In result, this driver is
+  able to support the bus frequency for all Exynos SoCs.
+
+  Detailed correlation between sub-blocks and power line according
+  to Exynos SoC::
+   - In case of Exynos3250, there are two power line as following::
+     VDD_MIF |--- DMC (Dynamic Memory Controller)
+
+     VDD_INT |--- LEFTBUS (parent device)
+       |--- PERIL
+       |--- MFC
+       |--- G3D
+       |--- RIGHTBUS
+       |--- PERIR
+       |--- FSYS
+       |--- LCD0
+       |--- PERIR
+       |--- ISP
+       |--- CAM
+
+     - MIF bus's frequency/voltage table
+       -----------------------
+       |Lv| Freq   | Voltage |
+       -----------------------
+       |L1| 50000  |800000   |
+       |L2| 100000 |800000   |
+       |L3| 134000 |800000   |
+       |L4| 200000 |825000   |
+       |L5| 400000 |875000   |
+       -----------------------
+
+     - INT bus's frequency/voltage table
+       ----------------------------------------------------------
+       |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP    |PERIL  ||VDD_INT |
+       | name|       |LCD0    |       |       |       ||        |
+       |     |       |FSYS    |       |       |       ||        |
+       |     |       |MFC     |       |       |       ||        |
+       ----------------------------------------------------------
+       |Mode |*parent|passive |passive|passive|passive||        |
+       ----------------------------------------------------------
+       |Lv   |Frequency                               ||Voltage |
+       ----------------------------------------------------------
+       |L1   |50000  |50000   |50000  |50000  |50000  ||900000  |
+       |L2   |80000  |80000   |80000  |80000  |80000  ||900000  |
+       |L3   |100000 |100000  |100000 |100000 |100000 ||1000000 |
+       |L4   |134000 |134000  |200000 |200000 |       ||1000000 |
+       |L5   |200000 |200000  |400000 |300000 |       ||1000000 |
+       ----------------------------------------------------------
+
+   - In case of Exynos4210, there is one power line as following::
+     VDD_INT |--- DMC (parent device, Dynamic Memory Controller)
+       |--- LEFTBUS
+       |--- PERIL
+       |--- MFC(L)
+       |--- G3D
+       |--- TV
+       |--- LCD0
+       |--- RIGHTBUS
+       |--- PERIR
+       |--- MFC(R)
+       |--- CAM
+       |--- FSYS
+       |--- GPS
+       |--- LCD0
+       |--- LCD1
+
+   - In case of Exynos4x12, there are two power line as following::
+     VDD_MIF |--- DMC (Dynamic Memory Controller)
+
+     VDD_INT |--- LEFTBUS (parent device)
+       |--- PERIL
+       |--- MFC(L)
+       |--- G3D
+       |--- TV
+       |--- IMAGE
+       |--- RIGHTBUS
+       |--- PERIR
+       |--- MFC(R)
+       |--- CAM
+       |--- FSYS
+       |--- GPS
+       |--- LCD0
+       |--- ISP
+
+   - In case of Exynos5422, there are two power line as following::
+     VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
+             |--- DREX 1
+
+     VDD_INT |--- NoC_Core (parent device)
+       |--- G2D
+       |--- G3D
+       |--- DISP1
+       |--- NoC_WCORE
+       |--- GSCL
+       |--- MSCL
+       |--- ISP
+       |--- MFC
+       |--- GEN
+       |--- PERIS
+       |--- PERIC
+       |--- FSYS
+       |--- FSYS2
+
+   - In case of Exynos5433, there is VDD_INT power line as following::
+     VDD_INT |--- G2D (parent device)
+       |--- MSCL
+       |--- GSCL
+       |--- JPEG
+       |--- MFC
+       |--- HEVC
+       |--- BUS0
+       |--- BUS1
+       |--- BUS2
+       |--- PERIS (Fixed clock rate)
+       |--- PERIC (Fixed clock rate)
+       |--- FSYS  (Fixed clock rate)
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos-bus
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: bus
+
+  devfreq:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Parent bus device. Valid and required only for the passive bus devices.
+
+  devfreq-events:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 4
+    description:
+      Devfreq-event device to monitor the current utilization of buses. Valid
+      and required only for the parent bus devices.
+
+  exynos,saturation-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Percentage value which is used to calibrate the performance count against
+      total cycle count.  Valid only for the parent bus devices.
+
+  '#interconnect-cells':
+    const: 0
+
+  interconnects:
+    minItems: 1
+    maxItems: 2
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  samsung,data-clock-ratio:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 8
+    description:
+      Ratio of the data throughput in B/s to minimum data clock frequency in
+      Hz.
+
+  vdd-supply:
+    description:
+      Main bus power rail. Valid and required only for the parent bus devices.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos3250.h>
+
+    bus-dmc {
+        compatible = "samsung,exynos-bus";
+        clocks = <&cmu_dmc CLK_DIV_DMC>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_dmc_opp_table>;
+        devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+        vdd-supply = <&buck1_reg>;
+
+        bus_dmc_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-50000000 {
+                opp-hz = /bits/ 64 <50000000>;
+                opp-microvolt = <800000>;
+            };
+            opp-100000000 {
+                opp-hz = /bits/ 64 <100000000>;
+                opp-microvolt = <800000>;
+            };
+            opp-134000000 {
+                opp-hz = /bits/ 64 <134000000>;
+                opp-microvolt = <800000>;
+            };
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                opp-microvolt = <825000>;
+            };
+            opp-400000000 {
+                opp-hz = /bits/ 64 <400000000>;
+                opp-microvolt = <875000>;
+            };
+        };
+    };
+
+    ppmu_dmc0: ppmu@106a0000 {
+        compatible = "samsung,exynos-ppmu";
+        reg = <0x106a0000 0x2000>;
+        events {
+            ppmu_dmc0_3: ppmu-event3-dmc0 {
+                event-name = "ppmu-event3-dmc0";
+            };
+        };
+    };
+
+    bus_leftbus: bus-leftbus {
+        compatible = "samsung,exynos-bus";
+        clocks = <&cmu CLK_DIV_GDL>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_leftbus_opp_table>;
+        devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+        vdd-supply = <&buck3_reg>;
+    };
+
+    bus-rightbus {
+        compatible = "samsung,exynos-bus";
+        clocks = <&cmu CLK_DIV_GDR>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_leftbus_opp_table>;
+        devfreq = <&bus_leftbus>;
+    };
+
+  - |
+    dmc: bus-dmc {
+        compatible = "samsung,exynos-bus";
+        clocks = <&clock CLK_DIV_DMC>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_dmc_opp_table>;
+        samsung,data-clock-ratio = <4>;
+        #interconnect-cells = <0>;
+        devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+        vdd-supply = <&buck1_reg>;
+    };
+
+    leftbus: bus-leftbus {
+        compatible = "samsung,exynos-bus";
+        clocks = <&clock CLK_DIV_GDL>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_leftbus_opp_table>;
+        interconnects = <&dmc>;
+        #interconnect-cells = <0>;
+        devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+        vdd-supply = <&buck3_reg>;
+    };
+
+    display: bus-display {
+        compatible = "samsung,exynos-bus";
+        clocks = <&clock CLK_DIV_ACLK_266>;
+        clock-names = "bus";
+        operating-points-v2 = <&bus_display_opp_table>;
+        interconnects = <&leftbus &dmc>;
+        #interconnect-cells = <0>;
+        devfreq = <&leftbus>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
index 5da333c644c9..27756d0c5419 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml
@@ -32,7 +32,7 @@ properties:
       The first cell is the input IRQ number, between 0 and 2, while the second
       cell is the trigger type as defined in interrupt.txt in this directory.
 
-  'interrupts':
+  interrupts:
     description: |
       Contains the GIC SPI IRQs mapped to the external interrupt lines.
       They shall be specified sequentially from output 0 to 2.
@@ -44,7 +44,7 @@ required:
   - reg
   - interrupt-controller
   - '#interrupt-cells'
-  - 'interrupts'
+  - interrupts
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
index 953d875b5e74..a713633be733 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun4i-a10-ic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Interrupt Controller Device Tree Bindings
+title: Allwinner A10 Interrupt Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml
index 4db24b8a9ffe..4fa6fd400eef 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun6i-a31-r-intc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 NMI/Wakeup Interrupt Controller Device Tree Bindings
+title: Allwinner A31 NMI/Wakeup Interrupt Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
index 7fc9ad5ef38c..83603180d8d9 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A20 Non-Maskable Interrupt Controller Device Tree Bindings
+title: Allwinner A20 Non-Maskable Interrupt Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
index 23b18b92c558..bde63f8f090e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -18,6 +18,7 @@ Required properties:
     "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
     "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3)
     "amlogic,meson-a1-gpio-intc" for A1 SoCs (A113L)
+    "amlogic,meson-s4-gpio-intc" for S4 SoCs (S802X2, S905Y4, S805X2G, S905W2)
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller.
 - #interrupt-cells : Specifies the number of cells needed to encode an
diff --git a/Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt b/Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt
deleted file mode 100644
index f4b4193d830e..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/andestech,ativic32.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-* Andestech Internal Vector Interrupt Controller
-
-The Internal Vector Interrupt Controller (IVIC) is a basic interrupt controller
-suitable for a simpler SoC platform not requiring a more sophisticated and
-bigger External Vector Interrupt Controller.
-
-
-Main node required properties:
-
-- compatible : should at least contain  "andestech,ativic32".
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells: 1 cells and refer to interrupt-controller/interrupts
-
-Examples:
-	intc: interrupt-controller {
-		compatible = "andestech,ativic32";
-		#interrupt-cells = <1>;
-		interrupt-controller;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
index cf6c091a07b1..698588e9aa86 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
@@ -56,6 +56,8 @@ properties:
           - 1: virtual HV timer
           - 2: physical guest timer
           - 3: virtual guest timer
+          - 4: 'efficient' CPU PMU
+          - 5: 'performance' CPU PMU
 
       The 3rd cell contains the interrupt flags. This is normally
       IRQ_TYPE_LEVEL_HIGH (4).
@@ -65,6 +67,37 @@ properties:
       Specifies base physical address and size of the AIC registers.
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
+  affinities:
+    type: object
+    additionalProperties: false
+    description:
+      FIQ affinity can be expressed as a single "affinities" node,
+      containing a set of sub-nodes, one per FIQ with a non-default
+      affinity.
+    patternProperties:
+      "^.+-affinity$":
+        type: object
+        additionalProperties: false
+        properties:
+          apple,fiq-index:
+            description:
+              The interrupt number specified as a FIQ, and for which
+              the affinity is not the default.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 5
+
+          cpus:
+            description:
+              Should be a list of phandles to CPU nodes (as described in
+              Documentation/devicetree/bindings/arm/cpus.yaml).
+
+        required:
+          - apple,fiq-index
+          - cpus
+
 required:
   - compatible
   - '#interrupt-cells'
diff --git a/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml b/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml
new file mode 100644
index 000000000000..2bde6cc6fe0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/apple,aic2.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/apple,aic2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Interrupt Controller 2
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+
+description: |
+  The Apple Interrupt Controller 2 is a simple interrupt controller present on
+  Apple ARM SoC platforms starting with t600x (M1 Pro and Max).
+
+  It provides the following features:
+
+  - Level-triggered hardware IRQs wired to SoC blocks
+    - Single mask bit per IRQ
+    - Automatic masking on event delivery (auto-ack)
+    - Software triggering (ORed with hw line)
+  - Automatic prioritization (single event/ack register per CPU, lower IRQs =
+    higher priority)
+  - Automatic masking on ack
+  - Support for multiple dies
+
+  This device also represents the FIQ interrupt sources on platforms using AIC,
+  which do not go through a discrete interrupt controller. It also handles
+  FIQ-based Fast IPIs.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8112-aic
+          - apple,t6000-aic
+      - const: apple,aic2
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    minimum: 3
+    maximum: 4
+    description: |
+      The 1st cell contains the interrupt type:
+        - 0: Hardware IRQ
+        - 1: FIQ
+
+      The 2nd cell contains the die ID (only present on apple,t6000-aic).
+
+      The next cell contains the interrupt number.
+        - HW IRQs: interrupt number
+        - FIQs:
+          - 0: physical HV timer
+          - 1: virtual HV timer
+          - 2: physical guest timer
+          - 3: virtual guest timer
+
+      The last cell contains the interrupt flags. This is normally
+      IRQ_TYPE_LEVEL_HIGH (4).
+
+  reg:
+    items:
+      - description: Address and size of the main AIC2 registers.
+      - description: Address and size of the AIC2 Event register.
+
+  reg-names:
+    items:
+      - const: core
+      - const: event
+
+  power-domains:
+    maxItems: 1
+
+  affinities:
+    type: object
+    additionalProperties: false
+    description:
+      FIQ affinity can be expressed as a single "affinities" node,
+      containing a set of sub-nodes, one per FIQ with a non-default
+      affinity.
+    patternProperties:
+      "^.+-affinity$":
+        type: object
+        additionalProperties: false
+        properties:
+          apple,fiq-index:
+            description:
+              The interrupt number specified as a FIQ, and for which
+              the affinity is not the default.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 5
+
+          cpus:
+            $ref: /schemas/types.yaml#/definitions/phandle-array
+            description:
+              Should be a list of phandles to CPU nodes (as described in
+              Documentation/devicetree/bindings/arm/cpus.yaml).
+
+        required:
+          - apple,fiq-index
+          - cpus
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: apple,t8112-aic
+    then:
+      properties:
+        '#interrupt-cells':
+          const: 3
+    else:
+      properties:
+        '#interrupt-cells':
+          const: 4
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        aic: interrupt-controller@28e100000 {
+            compatible = "apple,t6000-aic", "apple,aic2";
+            #interrupt-cells = <4>;
+            interrupt-controller;
+            reg = <0x2 0x8e100000 0x0 0xc000>,
+                  <0x2 0x8e10c000 0x0 0x4>;
+            reg-names = "core", "event";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
index c84f9fe7f254..92117261e1e1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ARM Generic Interrupt Controller, version 3
 
 maintainers:
-  - Marc Zyngier <marc.zyngier@arm.com>
+  - Marc Zyngier <maz@kernel.org>
 
 description: |
   AArch64 SMP cores are often associated with a GICv3, providing Private
@@ -78,7 +78,11 @@ properties:
       - GIC Hypervisor interface (GICH)
       - GIC Virtual CPU interface (GICV)
 
-      GICC, GICH and GICV are optional.
+      GICC, GICH and GICV are optional, but must be described if the CPUs
+      support them. Examples of such CPUs are ARM's implementations of the
+      ARMv8.0 architecture such as Cortex-A32, A34, A35, A53, A57, A72 and
+      A73 (this list is not exhaustive).
+
     minItems: 2
     maxItems: 4096   # Should be enough?
 
@@ -104,7 +108,7 @@ properties:
 
   msi-controller:
     description:
-      Only present if the Message Based Interrupt functionnality is
+      Only present if the Message Based Interrupt functionality is
       being exposed by the HW, and the mbi-ranges property present.
 
   mbi-ranges:
@@ -129,15 +133,19 @@ properties:
 
   ppi-partitions:
     type: object
+    additionalProperties: false
     description:
       PPI affinity can be expressed as a single "ppi-partitions" node,
       containing a set of sub-nodes.
     patternProperties:
       "^interrupt-partition-[0-9]+$":
         type: object
+        additionalProperties: false
         properties:
           affinity:
             $ref: /schemas/types.yaml#/definitions/phandle-array
+            items:
+              maxItems: 1
             description:
               Should be a list of phandles to CPU nodes (as described in
               Documentation/devicetree/bindings/arm/cpus.yaml).
@@ -164,7 +172,6 @@ dependencies:
 
 required:
   - compatible
-  - interrupts
   - reg
 
 patternProperties:
@@ -239,6 +246,7 @@ examples:
       };
     };
 
+  - |
     interrupt-controller@2c010000 {
       compatible = "arm,gic-v3";
       #interrupt-cells = <4>;
@@ -254,7 +262,7 @@ examples:
             <0x2c040000 0x2000>,  // GICC
             <0x2c060000 0x2000>,  // GICH
             <0x2c080000 0x2000>;  // GICV
-      interrupts = <1 9 4>;
+      interrupts = <1 9 4 0>;
 
       msi-controller@2c200000 {
         compatible = "arm,gic-v3-its";
@@ -272,11 +280,11 @@ examples:
 
       ppi-partitions {
         part0: interrupt-partition-0 {
-          affinity = <&cpu0 &cpu2>;
+          affinity = <&cpu0>, <&cpu2>;
         };
 
         part1: interrupt-partition-1 {
-          affinity = <&cpu1 &cpu3>;
+          affinity = <&cpu1>, <&cpu3>;
         };
       };
     };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
index ba282f4c9fd0..a2846e493497 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
@@ -58,14 +58,15 @@ properties:
               - enum:
                   - nvidia,tegra186-agic
                   - nvidia,tegra194-agic
+                  - nvidia,tegra234-agic
               - const: nvidia,tegra210-agic
 
   interrupt-controller: true
 
   "#address-cells":
-    enum: [ 0, 1 ]
+    enum: [ 0, 1, 2 ]
   "#size-cells":
-    const: 1
+    enum: [ 1, 2 ]
 
   "#interrupt-cells":
     const: 3
@@ -132,8 +133,8 @@ properties:
       - items: # for "arm,cortex-a9-gic"
           - const: PERIPHCLK
           - const: PERIPHCLKEN
-      - const: clk # for "arm,gic-400" and "nvidia,tegra210"
-      - const: gclk #for "arm,pl390"
+      - const: clk  # for "arm,gic-400" and "nvidia,tegra210"
+      - const: gclk # for "arm,pl390"
 
   power-domains:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
deleted file mode 100644
index 37aea40d5430..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm3380-l2-intc.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Broadcom BCM3380-style Level 1 / Level 2 interrupt controller
-
-This interrupt controller shows up in various forms on many BCM338x/BCM63xx
-chipsets.  It has the following properties:
-
-- outputs a single interrupt signal to its interrupt controller parent
-
-- contains one or more enable/status word pairs, which often appear at
-  different offsets in different blocks
-
-- no atomic set/clear operations
-
-Required properties:
-
-- compatible: should be "brcm,bcm3380-l2-intc"
-- reg: specifies one or more enable/status pairs, in the following format:
-  <enable_reg 0x4 status_reg 0x4>...
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line in the interrupt-parent controller
-  node, valid values depend on the type of parent interrupt controller
-
-Optional properties:
-
-- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Example:
-
-irq0_intc: interrupt-controller@10000020 {
-	compatible = "brcm,bcm3380-l2-intc";
-	reg = <0x10000024 0x4 0x1000002c 0x4>,
-	      <0x10000020 0x4 0x10000028 0x4>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-	interrupt-parent = <&cpu_intc>;
-	interrupts = <2>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
deleted file mode 100644
index 5ddef1dc0c1a..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Broadcom BCM7038-style Level 1 interrupt controller
-
-This block is a first level interrupt controller that is typically connected
-directly to one of the HW INT lines on each CPU.  Every BCM7xxx set-top chip
-since BCM7038 has contained this hardware.
-
-Key elements of the hardware design include:
-
-- 64, 96, 128, or 160 incoming level IRQ lines
-
-- Most onchip peripherals are wired directly to an L1 input
-
-- A separate instance of the register set for each CPU, allowing individual
-  peripheral IRQs to be routed to any CPU
-
-- Atomic mask/unmask operations
-
-- No polarity/level/edge settings
-
-- No FIFO or priority encoder logic; software is expected to read all
-  2-5 status words to determine which IRQs are pending
-
-Required properties:
-
-- compatible: should be "brcm,bcm7038-l1-intc"
-- reg: specifies the base physical address and size of the registers;
-  the number of supported IRQs is inferred from the size argument
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
-  node; valid values depend on the type of parent interrupt controller
-
-Optional properties:
-
-- brcm,irq-can-wake: If present, this means the L1 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Optional properties:
-
-- brcm,int-fwd-mask: if present, a bit mask to indicate which interrupts
-  have already been configured by the firmware and should be left unmanaged.
-  This should have one 32-bit word per status/set/clear/mask group.
-
-If multiple reg ranges and interrupt-parent entries are present on an SMP
-system, the driver will allow IRQ SMP affinity to be set up through the
-/proc/irq/ interface.  In the simplest possible configuration, only one
-reg range and one interrupt-parent is needed.
-
-Example:
-
-periph_intc: periph_intc@1041a400 {
-        compatible = "brcm,bcm7038-l1-intc";
-        reg = <0x1041a400 0x30 0x1041a600 0x30>;
-
-        interrupt-controller;
-        #interrupt-cells = <1>;
-
-        interrupt-parent = <&cpu_intc>;
-        interrupts = <2>, <3>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
new file mode 100644
index 000000000000..5ecb6faa70dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7038-l1-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7038-style Level 1 interrupt controller
+
+description: >
+  This block is a first level interrupt controller that is typically connected
+  directly to one of the HW INT lines on each CPU.  Every BCM7xxx set-top chip
+  since BCM7038 has contained this hardware.
+
+  Key elements of the hardware design include:
+
+   - 64, 96, 128, or 160 incoming level IRQ lines
+
+   - Most onchip peripherals are wired directly to an L1 input
+
+   - A separate instance of the register set for each CPU, allowing individual
+     peripheral IRQs to be routed to any CPU
+
+   - Atomic mask/unmask operations
+
+   - No polarity/level/edge settings
+
+   - No FIFO or priority encoder logic; software is expected to read all
+     2-5 status words to determine which IRQs are pending
+
+   If multiple reg ranges and interrupt-parent entries are present on an SMP
+   system, the driver will allow IRQ SMP affinity to be set up through the
+   /proc/irq/ interface.  In the simplest possible configuration, only one
+   reg range and one interrupt-parent is needed.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: brcm,bcm7038-l1-intc
+
+  reg:
+    description: >
+      Specifies the base physical address and size of the registers
+      the number of supported IRQs is inferred from the size argument
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    description: >
+     Specifies the interrupt line(s) in the interrupt-parent controller node;
+     valid values depend on the type of parent interrupt controller
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L1 controller can be used as a
+      wakeup source for system suspend/resume.
+
+  brcm,int-fwd-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      If present, a bit mask to indicate which interrupts have already been
+      configured by the firmware and should be left unmanaged. This should
+      have one 32-bit word per status/set/clear/mask group.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    periph_intc: interrupt-controller@1041a400 {
+      compatible = "brcm,bcm7038-l1-intc";
+      reg = <0x1041a400 0x30>, <0x1041a600 0x30>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      interrupt-parent = <&cpu_intc>;
+      interrupts = <2>, <3>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
deleted file mode 100644
index addd86b6ca2f..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-Broadcom BCM7120-style Level 2 interrupt controller
-
-This interrupt controller hardware is a second level interrupt controller that
-is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
-platforms. It can be found on BCM7xxx products starting with BCM7120.
-
-Such an interrupt controller has the following hardware design:
-
-- outputs multiple interrupts signals towards its interrupt controller parent
-
-- controls how some of the interrupts will be flowing, whether they will
-  directly output an interrupt signal towards the interrupt controller parent,
-  or if they will output an interrupt signal at this 2nd level interrupt
-  controller, in particular for UARTs
-
-- has one 32-bit enable word and one 32-bit status word
-
-- no atomic set/clear operations
-
-- not all bits within the interrupt controller actually map to an interrupt
-
-The typical hardware layout for this controller is represented below:
-
-2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
-
-0 -----[ MUX ] ------------|==========> GIC interrupt 75
-          \-----------\
-                       |
-1 -----[ MUX ] --------)---|==========> GIC interrupt 76
-          \------------|
-                       |
-2 -----[ MUX ] --------)---|==========> GIC interrupt 77
-          \------------|
-                       |
-3 ---------------------|
-4 ---------------------|
-5 ---------------------|
-7 ---------------------|---|===========> GIC interrupt 66
-9 ---------------------|
-10 --------------------|
-11 --------------------/
-
-6 ------------------------\
-                           |===========> GIC interrupt 64
-8 ------------------------/
-
-12 ........................ X
-13 ........................ X 		(not connected)
-..
-31 ........................ X
-
-Required properties:
-
-- compatible: should be "brcm,bcm7120-l2-intc"
-- reg: specifies the base physical address and size of the registers
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an interrupt
-  source, should be 1.
-- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
-  node, valid values depend on the type of parent interrupt controller
-- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts
-  are wired to this 2nd level interrupt controller, and how they match their
-  respective interrupt parents. Should match exactly the number of interrupts
-  specified in the 'interrupts' property.
-
-Optional properties:
-
-- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-- brcm,int-fwd-mask: if present, a bit mask to configure the interrupts which
-  have a mux gate, typically UARTs. Setting these bits will make their
-  respective interrupt outputs bypass this 2nd level interrupt controller
-  completely; it is completely transparent for the interrupt controller
-  parent. This should have one 32-bit word per enable/status pair.
-
-Example:
-
-irq0_intc: interrupt-controller@f0406800 {
-	compatible = "brcm,bcm7120-l2-intc";
-	interrupt-parent = <&intc>;
-	#interrupt-cells = <1>;
-	reg = <0xf0406800 0x8>;
-	interrupt-controller;
-	interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
-	brcm,int-map-mask = <0xeb8>, <0x140>;
-	brcm,int-fwd-mask = <0x7>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
new file mode 100644
index 000000000000..c680de1cbd56
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7120-style Level 2 and Broadcom BCM3380 Level 1 / Level 2
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description: >
+  This interrupt controller hardware is a second level interrupt controller that
+  is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
+  platforms. It can be found on BCM7xxx products starting with BCM7120.
+
+  Such an interrupt controller has the following hardware design:
+
+  - outputs multiple interrupts signals towards its interrupt controller parent
+
+  - controls how some of the interrupts will be flowing, whether they will
+    directly output an interrupt signal towards the interrupt controller parent,
+    or if they will output an interrupt signal at this 2nd level interrupt
+    controller, in particular for UARTs
+
+  - has one 32-bit enable word and one 32-bit status word
+
+  - no atomic set/clear operations
+
+  - not all bits within the interrupt controller actually map to an interrupt
+
+  The typical hardware layout for this controller is represented below:
+
+  2nd level interrupt line		Outputs for the parent controller (e.g: ARM GIC)
+
+  0 -----[ MUX ] ------------|==========> GIC interrupt 75
+            \-----------\
+                         |
+  1 -----[ MUX ] --------)---|==========> GIC interrupt 76
+            \------------|
+                         |
+  2 -----[ MUX ] --------)---|==========> GIC interrupt 77
+            \------------|
+                         |
+  3 ---------------------|
+  4 ---------------------|
+  5 ---------------------|
+  7 ---------------------|---|===========> GIC interrupt 66
+  9 ---------------------|
+  10 --------------------|
+  11 --------------------/
+
+  6 ------------------------\
+                            |===========> GIC interrupt 64
+  8 ------------------------/
+
+  12 ........................ X
+  13 ........................ X           (not connected)
+  ..
+  31 ........................ X
+
+  The BCM3380 Level 1 / Level 2 interrrupt controller shows up in various forms
+  on many BCM338x/BCM63xx chipsets. It has the following properties:
+
+  - outputs a single interrupt signal to its interrupt controller parent
+
+  - contains one or more enable/status word pairs, which often appear at
+    different offsets in different blocks
+
+  - no atomic set/clear operations
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm7120-l2-intc
+          - brcm,bcm3380-l2-intc
+
+  reg:
+    minItems: 1
+    maxItems: 4
+    description: >
+      Specifies the base physical address and size of the registers
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 32
+
+  brcm,int-map-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: >
+      32-bits bit mask describing how many and which interrupts are wired to
+      this 2nd level interrupt controller, and how they match their respective
+      interrupt parents. Should match exactly the number of interrupts
+      specified in the 'interrupts' property.
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L2 controller can be used as a wakeup source
+      for system suspend/resume.
+
+  brcm,int-fwd-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 1
+    description: >
+      if present, a bit mask to configure the interrupts which have a mux gate,
+      typically UARTs. Setting these bits will make their respective interrupt
+      outputs bypass this 2nd level interrupt controller completely; it is
+      completely transparent for the interrupt controller parent. This should
+      have one 32-bit word per enable/status pair.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+examples:
+  - |
+    irq0_intc: interrupt-controller@f0406800 {
+      compatible = "brcm,bcm7120-l2-intc";
+      interrupt-parent = <&intc>;
+      #interrupt-cells = <1>;
+      reg = <0xf0406800 0x8>;
+      interrupt-controller;
+      interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
+      brcm,int-map-mask = <0xeb8>, <0x140>;
+      brcm,int-fwd-mask = <0x7>;
+    };
+
+  - |
+    irq1_intc: interrupt-controller@10000020 {
+       compatible = "brcm,bcm3380-l2-intc";
+       reg = <0x10000024 0x4>, <0x1000002c 0x4>,
+             <0x10000020 0x4>, <0x10000028 0x4>;
+       interrupt-controller;
+       #interrupt-cells = <1>;
+       interrupt-parent = <&cpu_intc>;
+       interrupts = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
deleted file mode 100644
index 021cf822395c..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Broadcom Generic Level 2 Interrupt Controller
-
-Required properties:
-
-- compatible: should be one of:
-	      "brcm,hif-spi-l2-intc" or
-	      "brcm,upg-aux-aon-l2-intc" or
-	      "brcm,l2-intc" for latched interrupt controllers
-              should be "brcm,bcm7271-l2-intc" for level interrupt controllers
-- reg: specifies the base physical address and size of the registers
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an
-  interrupt source. Should be 1.
-- interrupts: specifies the interrupt line in the interrupt-parent irq space
-  to be used for cascading
-
-Optional properties:
-
-- brcm,irq-can-wake: If present, this means the L2 controller can be used as a
-  wakeup source for system suspend/resume.
-
-Example:
-
-hif_intr2_intc: interrupt-controller@f0441000 {
-	compatible = "brcm,l2-intc";
-	reg = <0xf0441000 0x30>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-	interrupt-parent = <&intc>;
-	interrupts = <0x0 0x20 0x0>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
new file mode 100644
index 000000000000..8961afca96f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/brcm,l2-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Generic Level 2 Interrupt Controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,hif-spi-l2-intc
+              - brcm,upg-aux-aon-l2-intc
+          - const: brcm,l2-intc
+      - items:
+          - enum:
+              - brcm,bcm2711-l2-intc
+          - const: brcm,l2-intc
+      - items:
+          - const: brcm,bcm7271-l2-intc
+      - items:
+          - const: brcm,l2-intc
+
+  reg:
+    maxItems: 1
+    description: >
+      Specifies the base physical address and size of the registers
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+  brcm,irq-can-wake:
+    type: boolean
+    description: >
+      If present, this means the L2 controller can be used as a wakeup source
+      for system suspend/resume.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+examples:
+  - |
+    hif_intr2_intc: interrupt-controller@f0441000 {
+      compatible = "brcm,l2-intc";
+      reg = <0xf0441000 0x30>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+      interrupt-parent = <&intc>;
+      interrupts = <0x0 0x20 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
index 1d6e0f64a807..985bfa4f6fda 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
@@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale INTMUX interrupt multiplexer
 
 maintainers:
-  - Joakim Zhang <qiangqing.zhang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - NXP Linux Team <linux-imx@nxp.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
index bcb5e20fa9ca..20ad4ad82ad6 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml
@@ -48,13 +48,13 @@ properties:
     const: 1
 
   fsl,channel:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       u32 value representing the output channel that all input IRQs should be
       steered into.
 
   fsl,num-irqs:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: |
       u32 value representing the number of input interrupts of this channel,
       should be multiple of 32 input interrupts and up to 512 interrupts.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
deleted file mode 100644
index 4d47df1a5c91..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale Layerscape external IRQs
-
-Some Layerscape SOCs (LS1021A, LS1043A, LS1046A
-LS1088A, LS208xA, LX216xA) support inverting
-the polarity of certain external interrupt lines.
-
-The device node must be a child of the node representing the
-Supplemental Configuration Unit (SCFG).
-
-Required properties:
-- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq".
-  "fsl,ls1043a-extirq": for LS1043A, LS1046A.
-  "fsl,ls1088a-extirq": for LS1088A, LS208xA, LX216xA.
-- #interrupt-cells: Must be 2. The first element is the index of the
-  external interrupt line. The second element is the trigger type.
-- #address-cells: Must be 0.
-- interrupt-controller: Identifies the node as an interrupt controller
-- reg: Specifies the Interrupt Polarity Control Register (INTPCR) in
-  the SCFG or the External Interrupt Control Register (IRQCR) in
-  the ISC.
-- interrupt-map: Specifies the mapping from external interrupts to GIC
-  interrupts.
-- interrupt-map-mask: Must be <0xffffffff 0>.
-
-Example:
-	scfg: scfg@1570000 {
-		compatible = "fsl,ls1021a-scfg", "syscon";
-		reg = <0x0 0x1570000 0x0 0x10000>;
-		big-endian;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x1570000 0x10000>;
-
-		extirq: interrupt-controller@1ac {
-			compatible = "fsl,ls1021a-extirq";
-			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			interrupt-controller;
-			reg = <0x1ac 4>;
-			interrupt-map =
-				<0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-				<1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-				<2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-				<3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-				<4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-				<5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-map-mask = <0xffffffff 0x0>;
-		};
-	};
-
-
-	interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
-			      <&extirq 1 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
new file mode 100644
index 000000000000..887e565b9573
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,ls-extirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape External Interrupt Controller
+
+maintainers:
+  - Shawn Guo <shawnguo@kernel.org>
+  - Li Yang <leoyang.li@nxp.com>
+
+description: |
+  Some Layerscape SOCs (LS1021A, LS1043A, LS1046A LS1088A, LS208xA,
+  LX216xA) support inverting the polarity of certain external interrupt
+  lines.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,ls1021a-extirq
+          - fsl,ls1043a-extirq
+          - fsl,ls1088a-extirq
+      - items:
+          - enum:
+              - fsl,ls1046a-extirq
+          - const: fsl,ls1043a-extirq
+      - items:
+          - enum:
+              - fsl,ls2080a-extirq
+              - fsl,lx2160a-extirq
+          - const: fsl,ls1088a-extirq
+
+  '#interrupt-cells':
+    const: 2
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+    description:
+      Specifies the Interrupt Polarity Control Register (INTPCR) in the
+      SCFG or the External Interrupt Control Register (IRQCR) in the ISC.
+
+  interrupt-map:
+    description: Specifies the mapping from external interrupts to GIC interrupts.
+
+  interrupt-map-mask: true
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+  - interrupt-map
+  - interrupt-map-mask
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1021a-extirq
+    then:
+      properties:
+        interrupt-map:
+          minItems: 6
+          maxItems: 6
+        interrupt-map-mask:
+          items:
+            - const: 0x7
+            - const: 0
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,ls1043a-extirq
+              - fsl,ls1046a-extirq
+              - fsl,ls1088a-extirq
+              - fsl,ls2080a-extirq
+              - fsl,lx2160a-extirq
+    then:
+      properties:
+        interrupt-map:
+          minItems: 12
+          maxItems: 12
+        interrupt-map-mask:
+          items:
+            - const: 0xf
+            - const: 0
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    interrupt-controller@1ac {
+            compatible = "fsl,ls1021a-extirq";
+            #interrupt-cells = <2>;
+            #address-cells = <0>;
+            interrupt-controller;
+            reg = <0x1ac 4>;
+            interrupt-map =
+                    <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+                    <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+                    <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+                    <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+                    <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+                    <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-map-mask = <0x7 0x0>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
new file mode 100644
index 000000000000..799ae5c3e32a
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,mu-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale/NXP i.MX Messaging Unit (MU) work as msi controller
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description: |
+  The Messaging Unit module enables two processors within the SoC to
+  communicate and coordinate by passing messages (e.g. data, status
+  and control) through the MU interface. The MU also provides the ability
+  for one processor (A side) to signal the other processor (B side) using
+  interrupts.
+
+  Because the MU manages the messaging between processors, the MU uses
+  different clocks (from each side of the different peripheral buses).
+  Therefore, the MU must synchronize the accesses from one side to the
+  other. The MU accomplishes synchronization using two sets of matching
+  registers (Processor A-side, Processor B-side).
+
+  MU can work as msi interrupt controller to do doorbell
+
+allOf:
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx6sx-mu-msi
+      - fsl,imx7ulp-mu-msi
+      - fsl,imx8ulp-mu-msi
+      - fsl,imx8ulp-mu-msi-s4
+
+  reg:
+    items:
+      - description: a side register base address
+      - description: b side register base address
+
+  reg-names:
+    items:
+      - const: processor-a-side
+      - const: processor-b-side
+
+  interrupts:
+    description: a side interrupt number.
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    items:
+      - description: a side power domain
+      - description: b side power domain
+
+  power-domain-names:
+    items:
+      - const: processor-a-side
+      - const: processor-b-side
+
+  interrupt-controller: true
+
+  msi-controller: true
+
+  "#msi-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - msi-controller
+  - "#msi-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    msi-controller@5d270000 {
+        compatible = "fsl,imx6sx-mu-msi";
+        msi-controller;
+        #msi-cells = <0>;
+        interrupt-controller;
+        reg = <0x5d270000 0x10000>,     /* A side */
+              <0x5d300000 0x10000>;     /* B side */
+        reg-names = "processor-a-side", "processor-b-side";
+        interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd IMX_SC_R_MU_12A>,
+                        <&pd IMX_SC_R_MU_12B>;
+        power-domain-names = "processor-a-side", "processor-b-side";
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml
index 160ff4b07cac..afb3dd80b643 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/idt,32434-pic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: IDT 79RC32434 Interrupt Controller Device Tree Bindings
+title: IDT 79RC32434 Interrupt Controller
 
 maintainers:
   - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
index 0358a7739c8e..609308a5f91d 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,intc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/ingenic,intc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs interrupt controller devicetree bindings
+title: Ingenic SoCs interrupt controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt
deleted file mode 100644
index 7d19f494f19a..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Interrupt chips
----------------
-
-* Intel I/O Advanced Programmable Interrupt Controller (IO APIC)
-
-  Required properties:
-  --------------------
-     compatible = "intel,ce4100-ioapic";
-     #interrupt-cells = <2>;
-
-  Device's interrupt property:
-
-     interrupts = <P S>;
-
-  The first number (P) represents the interrupt pin which is wired to the
-  IO APIC. The second number (S) represents the sense of interrupt which
-  should be configured and can be one of:
-    0 - Edge Rising
-    1 - Level Low
-    2 - Level High
-    3 - Edge Falling
-
-* Local APIC
-  Required property:
-
-     compatible = "intel,ce4100-lapic";
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.yaml
new file mode 100644
index 000000000000..a3ac818f067d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-ioapic.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/intel,ce4100-ioapic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel I/O Advanced Programmable Interrupt Controller (IO APIC)
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+description: |
+  Intel's Advanced Programmable Interrupt Controller (APIC) is a
+  family of interrupt controllers. The APIC is a split
+  architecture design, with a local component (LAPIC) integrated
+  into the processor itself and an external I/O APIC. Local APIC
+  (lapic) receives interrupts from the processor's interrupt pins,
+  from internal sources and from an external I/O APIC (ioapic).
+  And it sends these to the processor core for handling.
+  See [1] Chapter 8 for more details.
+
+  Many of the Intel's generic devices like hpet, ioapic, lapic have
+  the ce4100 name in their compatible property names because they
+  first appeared in CE4100 SoC.
+
+  This schema defines bindings for I/O APIC interrupt controller.
+
+  [1] https://pdos.csail.mit.edu/6.828/2008/readings/ia32/IA32-3A.pdf
+
+properties:
+  compatible:
+    const: intel,ce4100-ioapic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ioapic1: interrupt-controller@fec00000 {
+        compatible = "intel,ce4100-ioapic";
+        reg = <0xfec00000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-lapic.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-lapic.yaml
new file mode 100644
index 000000000000..6b20a5fa8590
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ce4100-lapic.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/intel,ce4100-lapic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Local Advanced Programmable Interrupt Controller (LAPIC)
+
+maintainers:
+  - Rahul Tanwar <rtanwar@maxlinear.com>
+
+description: |
+  Intel's Advanced Programmable Interrupt Controller (APIC) is a
+  family of interrupt controllers. The APIC is a split
+  architecture design, with a local component (LAPIC) integrated
+  into the processor itself and an external I/O APIC. Local APIC
+  (lapic) receives interrupts from the processor's interrupt pins,
+  from internal sources and from an external I/O APIC (ioapic).
+  And it sends these to the processor core for handling.
+  See [1] Chapter 8 for more details.
+
+  Many of the Intel's generic devices like hpet, ioapic, lapic have
+  the ce4100 name in their compatible property names because they
+  first appeared in CE4100 SoC.
+
+  This schema defines bindings for local APIC interrupt controller.
+
+  [1] https://pdos.csail.mit.edu/6.828/2008/readings/ia32/IA32-3A.pdf
+
+properties:
+  compatible:
+    const: intel,ce4100-lapic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  intel,virtual-wire-mode:
+    description: Intel defines a few possible interrupt delivery
+      modes. With respect to boot/init time, mainly two interrupt
+      delivery modes are possible.
+      PIC Mode - Legacy external 8259 compliant PIC interrupt controller.
+      Virtual Wire Mode - use lapic as virtual wire interrupt delivery mode.
+      For ACPI or MPS spec compliant systems, it is figured out by some read
+      only bit field/s available in their respective defined data structures.
+      For OF based systems, it is by default set to PIC mode.
+      But if this optional boolean property is set, then the interrupt delivery
+      mode is configured to virtual wire compatibility mode.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    lapic0: interrupt-controller@fee00000 {
+        compatible = "intel,ce4100-lapic";
+        reg = <0xfee00000 0x1000>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        intel,virtual-wire-mode;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
index 14dced11877b..a02a6b5af205 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
@@ -2,8 +2,8 @@
 # Copyright 2018 Linaro Ltd.
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/interrupt-controller/intel,ixp4xx-interrupt.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/interrupt-controller/intel,ixp4xx-interrupt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Intel IXP4xx XScale Networking Processors Interrupt Controller
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,cpu-interrupt-controller.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,cpu-interrupt-controller.yaml
new file mode 100644
index 000000000000..adf989976dcc
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,cpu-interrupt-controller.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,cpu-interrupt-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LoongArch CPU Interrupt Controller
+
+maintainers:
+  - Liu Peibao <liupeibao@loongson.cn>
+
+properties:
+  compatible:
+    const: loongson,cpu-interrupt-controller
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - interrupt-controller
+
+examples:
+  - |
+    interrupt-controller {
+      compatible = "loongson,cpu-interrupt-controller";
+      #interrupt-cells = <1>;
+      interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
index d6bc1a687fc7..f0acd5671bb1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/interrupt-controller/loongson,htpic.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,htpic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Loongson-3 HyperTransport Interrupt Controller
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml
index 87a74558204f..1d145763908e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htvec.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/interrupt-controller/loongson,htvec.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,htvec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Loongson-3 HyperTransport Interrupt Vector Controller
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
index 750cc44628e9..00b570c82903 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/interrupt-controller/loongson,liointc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,liointc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Loongson Local I/O Interrupt Controller
 
@@ -54,7 +54,7 @@ properties:
   '#interrupt-cells':
     const: 2
 
-  'loongson,parent_int_map':
+  loongson,parent_int_map:
     description: |
       This property points how the children interrupts will be mapped into CPU
       interrupt lines. Each cell refers to a parent interrupt line from 0 to 3
@@ -71,7 +71,7 @@ required:
   - interrupts
   - interrupt-controller
   - '#interrupt-cells'
-  - 'loongson,parent_int_map'
+  - loongson,parent_int_map
 
 
 unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
deleted file mode 100644
index a63ed9fcb535..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Loongson ls1x Interrupt Controller
-
-Required properties:
-
-- compatible : should be "loongson,ls1x-intc". Valid strings are:
-
-- reg : Specifies base physical address and size of the registers.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 2.
-- interrupts : Specifies the CPU interrupt the controller is connected to.
-
-Example:
-
-intc: interrupt-controller@1fd01040 {
-	compatible = "loongson,ls1x-intc";
-	reg = <0x1fd01040 0x18>;
-
-	interrupt-controller;
-	#interrupt-cells = <2>;
-
-	interrupt-parent = <&cpu_intc>;
-	interrupts = <2>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
new file mode 100644
index 000000000000..c60125fb1cbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,ls1x-intc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,ls1x-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-1 Interrupt Controller
+
+maintainers:
+  - Keguang Zhang <keguang.zhang@gmail.com>
+
+description:
+  Loongson-1 interrupt controller is connected to the MIPS core interrupt
+  controller, which controls several groups of interrupts.
+
+properties:
+  compatible:
+    const: loongson,ls1x-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    intc0: interrupt-controller@1fd01040 {
+        compatible = "loongson,ls1x-intc";
+        reg = <0x1fd01040 0x18>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&cpu_intc>;
+        interrupts = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
index 1f6fd73d4624..a71fc2218ede 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-msi.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/interrupt-controller/loongson,pch-msi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,pch-msi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Loongson PCH MSI Controller
 
@@ -25,7 +25,7 @@ properties:
     description:
       u32 value of the base of parent HyperTransport vector allocated
       to PCH MSI.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 255
 
@@ -33,7 +33,7 @@ properties:
     description:
       u32 value of the number of parent HyperTransport vectors allocated
       to PCH MSI.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 1
     maximum: 256
 
@@ -46,7 +46,7 @@ required:
   - loongson,msi-base-vec
   - loongson,msi-num-vecs
 
-additionalProperties: true #fixme
+additionalProperties: true # fixme
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml
index fdd6a38a31db..b7bc5cb1dff2 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,pch-pic.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/interrupt-controller/loongson,pch-pic.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/interrupt-controller/loongson,pch-pic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Loongson PCH PIC Controller
 
@@ -25,7 +25,7 @@ properties:
     description:
       u32 value of the base of parent HyperTransport vector allocated
       to PCH PIC.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 192
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
deleted file mode 100644
index 5865f4f2c69d..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,cirq.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* Mediatek 27xx cirq
-
-In Mediatek SOCs, the CIRQ is a low power interrupt controller designed to
-work outside MCUSYS which comprises with Cortex-Ax cores,CCI and GIC.
-The external interrupts (outside MCUSYS) will feed through CIRQ and connect
-to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive
-interrupts and generate a pulse signal to parent interrupt controller when
-flush command is executed. With CIRQ, MCUSYS can be completely turned off
-to improve the system power consumption without losing interrupts.
-
-Required properties:
-- compatible: should be one of
-  - "mediatek,mt2701-cirq" for mt2701 CIRQ
-  - "mediatek,mt8135-cirq" for mt8135 CIRQ
-  - "mediatek,mt8173-cirq" for mt8173 CIRQ
-  and "mediatek,cirq" as a fallback.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
-- reg: Physical base address of the cirq registers and length of memory
-  mapped region.
-- mediatek,ext-irq-range: Identifies external irq number range in different
-  SOCs.
-
-Example:
-	cirq: interrupt-controller@10204000 {
-		compatible = "mediatek,mt2701-cirq",
-			     "mediatek,mtk-cirq";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&sysirq>;
-		reg = <0 0x10204000 0 0x400>;
-		mediatek,ext-irq-start = <32 200>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
new file mode 100644
index 000000000000..fdcb4d8db818
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mediatek,mtk-cirq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Interrupt Controller
+
+maintainers:
+  - Youlin Pei <youlin.pei@mediatek.com>
+
+description:
+  In MediaTek SoCs, the CIRQ is a low power interrupt controller designed to
+  work outside of MCUSYS which comprises with Cortex-Ax cores, CCI and GIC.
+  The external interrupts (outside MCUSYS) will feed through CIRQ and connect
+  to GIC in MCUSYS. When CIRQ is enabled, it will record the edge-sensitive
+  interrupts and generate a pulse signal to parent interrupt controller when
+  flush command is executed. With CIRQ, MCUSYS can be completely turned off
+  to improve the system power consumption without losing interrupts.
+
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt2701-cirq
+          - mediatek,mt8135-cirq
+          - mediatek,mt8173-cirq
+          - mediatek,mt8192-cirq
+      - const: mediatek,mtk-cirq
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 3
+
+  interrupt-controller: true
+
+  mediatek,ext-irq-range:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: First CIRQ interrupt
+      - description: Last CIRQ interrupt
+    description:
+      Identifies the range of external interrupts in different SoCs
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+  - mediatek,ext-irq-range
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    cirq: interrupt-controller@10204000 {
+        compatible = "mediatek,mt2701-cirq", "mediatek,mtk-cirq";
+        reg = <0x10204000 0x400>;
+        #interrupt-cells = <3>;
+        interrupt-controller;
+        interrupt-parent = <&sysirq>;
+        mediatek,ext-irq-range = <32 200>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
index 84ced3f4179b..3ffc60184e44 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
@@ -25,6 +25,7 @@ Required properties:
 	"mediatek,mt6577-sysirq": for MT6577
 	"mediatek,mt2712-sysirq", "mediatek,mt6577-sysirq": for MT2712
 	"mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701
+	"mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq": for MT8365
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
 - reg: Physical base address of the intpol registers and length of memory
diff --git a/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml b/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml
new file mode 100644
index 000000000000..50003880ee6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/microchip,eic.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/microchip,eic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip External Interrupt Controller
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description:
+  This interrupt controller is found in Microchip SoCs (SAMA7G5) and provides
+  support for handling up to 2 external interrupt lines.
+
+properties:
+  compatible:
+    enum:
+      - microchip,sama7g5-eic
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell is the input IRQ number (between 0 and 1), the second cell
+      is the trigger type as defined in interrupt.txt present in this directory.
+
+  interrupts:
+    description: |
+      Contains the GIC SPI IRQs mapped to the external interrupt lines. They
+      should be specified sequentially from output 0 to output 1.
+    minItems: 2
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pclk
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    eic: interrupt-controller@e1628000 {
+      compatible = "microchip,sama7g5-eic";
+      reg = <0xe1628000 0x100>;
+      interrupt-parent = <&gic>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+      clock-names = "pclk";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
index 372ccbfae771..b7c5022eec84 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.yaml
@@ -4,13 +4,11 @@
 $id: http://devicetree.org/schemas/interrupt-controller/mrvl,intc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell MMP/Orion Interrupt controller bindings
+title: Marvell MMP/Orion Interrupt controller
 
 maintainers:
-  - Thomas Gleixner <tglx@linutronix.de>
-  - Jason Cooper <jason@lakedaemon.net>
-  - Marc Zyngier <maz@kernel.org>
-  - Rob Herring <robh+dt@kernel.org>
+  - Andrew Lunn <andrew@lunn.ch>
+  - Gregory Clement <gregory.clement@bootlin.com>
 
 allOf:
   - if:
@@ -55,8 +53,8 @@ allOf:
           maxItems: 1
         reg-names:
           items:
-            - const: 'mux status'
-            - const: 'mux mask'
+            - const: mux status
+            - const: mux mask
       required:
         - interrupts
     else:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
index 27b798bfe29b..4ff609faba32 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/interrupt-controller/mscc,ocelot-icpu-intr.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/interrupt-controller/mscc,ocelot-icpu-intr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Microsemi Ocelot SoC ICPU Interrupt Controller
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/msi-controller.yaml b/Documentation/devicetree/bindings/interrupt-controller/msi-controller.yaml
new file mode 100644
index 000000000000..449d6067ec88
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/msi-controller.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/msi-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MSI controller
+
+maintainers:
+  - Marc Zyngier <maz@kernel.org>
+
+description: |
+  An MSI controller signals interrupts to a CPU when a write is made
+  to an MMIO address by some master. An MSI controller may feature a
+  number of doorbells.
+
+properties:
+  "#msi-cells":
+    description: |
+      The number of cells in an msi-specifier, required if not zero.
+
+      Typically this will encode information related to sideband data,
+      and will not encode doorbells or payloads as these can be
+      configured dynamically.
+
+      The meaning of the msi-specifier is defined by the device tree
+      binding of the specific MSI controller.
+    enum: [0, 1]
+
+  msi-controller:
+    description:
+      Identifies the node as an MSI controller.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  msi-ranges:
+    description:
+      A list of <phandle intspec span> tuples, where "phandle" is the
+      parent interrupt controller, "intspec" is the starting/base
+      interrupt specifier and "span" is the size of the
+      range. Multiple ranges can be provided.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
+dependencies:
+  "#msi-cells": [ msi-controller ]
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml b/Documentation/devicetree/bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml
new file mode 100644
index 000000000000..46a1f5f54b74
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/mti,cpu-interrupt-controller.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/mti,cpu-interrupt-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS CPU Interrupt Controller
+
+description: >
+   On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
+   IRQs from a devicetree file and create a irq_domain for IRQ controller.
+
+   With the irq_domain in place we can describe how the 8 IRQs are wired to the
+   platforms internal interrupt controller cascade.
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+properties:
+  compatible:
+    const: mti,cpu-interrupt-controller
+
+  '#interrupt-cells':
+    const: 1
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+additionalProperties: false
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+
+examples:
+  - |
+    interrupt-controller {
+      compatible = "mti,cpu-interrupt-controller";
+      #address-cells = <0>;
+      #interrupt-cells = <1>;
+      interrupt-controller;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml b/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml
index 9ce6804bdb99..2d6307a383ad 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/nuvoton,wpcm450-aic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/nuvoton,wpcm450-aic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Nuvoton WPCM450 Advanced Interrupt Controller bindings
+title: Nuvoton WPCM450 Advanced Interrupt Controller
 
 maintainers:
   - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
new file mode 100644
index 000000000000..509d20c091af
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,mpm.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qcom,mpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcom MPM Interrupt Controller
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description:
+  Qualcomm Technologies Inc. SoCs based on the RPM architecture have a
+  MSM Power Manager (MPM) that is in always-on domain. In addition to managing
+  resources during sleep, the hardware also has an interrupt controller that
+  monitors the interrupts when the system is asleep, wakes up the APSS when
+  one of these interrupts occur and replays it to GIC interrupt controller
+  after GIC becomes operational.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: qcom,mpm
+
+  reg:
+    maxItems: 1
+    description:
+      Specifies the base address and size of vMPM registers in RPM MSG RAM.
+
+  interrupts:
+    maxItems: 1
+    description:
+      Specify the IRQ used by RPM to wakeup APSS.
+
+  mboxes:
+    maxItems: 1
+    description:
+      Specify the mailbox used to notify RPM for writing vMPM registers.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell is the MPM pin number for the interrupt, and the second
+      is the trigger type.
+
+  qcom,mpm-pin-count:
+    description:
+      Specify the total MPM pin count that a SoC supports.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  qcom,mpm-pin-map:
+    description:
+      A set of MPM pin numbers and the corresponding GIC SPIs.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: MPM pin number
+        - description: GIC SPI number for the MPM pin
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - mboxes
+  - interrupt-controller
+  - '#interrupt-cells'
+  - qcom,mpm-pin-count
+  - qcom,mpm-pin-map
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mpm: interrupt-controller@45f01b8 {
+        compatible = "qcom,mpm";
+        interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+        reg = <0x45f01b8 0x1000>;
+        mboxes = <&apcs_glb 1>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&intc>;
+        qcom,mpm-pin-count = <96>;
+        qcom,mpm-pin-map = <2 275>,
+                           <5 296>,
+                           <12 422>,
+                           <24 79>,
+                           <86 183>,
+                           <90 260>,
+                           <91 260>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
deleted file mode 100644
index 98d89e53013d..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-PDC interrupt controller
-
-Qualcomm Technologies Inc. SoCs based on the RPM Hardened architecture have a
-Power Domain Controller (PDC) that is on always-on domain. In addition to
-providing power control for the power domains, the hardware also has an
-interrupt controller that can be used to help detect edge low interrupts as
-well detect interrupts when the GIC is non-operational.
-
-GIC is parent interrupt controller at the highest level. Platform interrupt
-controller PDC is next in hierarchy, followed by others. Drivers requiring
-wakeup capabilities of their device interrupts routed through the PDC, must
-specify PDC as their interrupt controller and request the PDC port associated
-with the GIC interrupt. See example below.
-
-Properties:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: Should contain "qcom,<soc>-pdc" and "qcom,pdc"
-		    - "qcom,sc7180-pdc": For SC7180
-		    - "qcom,sc7280-pdc": For SC7280
-		    - "qcom,sdm845-pdc": For SDM845
-		    - "qcom,sdm8250-pdc": For SM8250
-		    - "qcom,sdm8350-pdc": For SM8350
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Specifies the base physical address for PDC hardware.
-
-- interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Specifies the number of cells needed to encode an interrupt
-		    source.
-		    Must be 2.
-		    The first element of the tuple is the PDC pin for the
-		    interrupt.
-		    The second element is the trigger type.
-
-- interrupt-controller:
-	Usage: required
-	Value type: <bool>
-	Definition: Identifies the node as an interrupt controller.
-
-- qcom,pdc-ranges:
-	Usage: required
-	Value type: <u32 array>
-	Definition: Specifies the PDC pin offset and the number of PDC ports.
-		    The tuples indicates the valid mapping of valid PDC ports
-		    and their hwirq mapping.
-		    The first element of the tuple is the starting PDC port.
-		    The second element is the GIC hwirq number for the PDC port.
-		    The third element is the number of interrupts in sequence.
-
-Example:
-
-	pdc: interrupt-controller@b220000 {
-		compatible = "qcom,sdm845-pdc";
-		reg = <0xb220000 0x30000>;
-		qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&intc>;
-		interrupt-controller;
-	};
-
-DT binding of a device that wants to use the GIC SPI 514 as a wakeup
-interrupt, must do -
-
-	wake-device {
-		interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
-In this case interrupt 514 would be mapped to port 2 on the PDC as defined by
-the qcom,pdc-ranges property.
diff --git a/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
new file mode 100644
index 000000000000..a106ba6e810b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/qcom,pdc.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/qcom,pdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PDC interrupt controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm Technologies Inc. SoCs based on the RPM Hardened architecture have a
+  Power Domain Controller (PDC) that is on always-on domain. In addition to
+  providing power control for the power domains, the hardware also has an
+  interrupt controller that can be used to help detect edge low interrupts as
+  well detect interrupts when the GIC is non-operational.
+
+  GIC is parent interrupt controller at the highest level. Platform interrupt
+  controller PDC is next in hierarchy, followed by others. Drivers requiring
+  wakeup capabilities of their device interrupts routed through the PDC, must
+  specify PDC as their interrupt controller and request the PDC port associated
+  with the GIC interrupt. See example below.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,qdu1000-pdc
+          - qcom,sa8775p-pdc
+          - qcom,sc7180-pdc
+          - qcom,sc7280-pdc
+          - qcom,sc8280xp-pdc
+          - qcom,sdm845-pdc
+          - qcom,sdx55-pdc
+          - qcom,sdx65-pdc
+          - qcom,sm6350-pdc
+          - qcom,sm8150-pdc
+          - qcom,sm8250-pdc
+          - qcom,sm8350-pdc
+          - qcom,sm8450-pdc
+      - const: qcom,pdc
+
+  reg:
+    minItems: 1
+    items:
+      - description: PDC base register region
+      - description: Edge or Level config register for SPI interrupts
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  qcom,pdc-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    minItems: 1
+    maxItems: 128 # no hard limit
+    items:
+      items:
+        - description: starting PDC port
+        - description: GIC hwirq number for the PDC port
+        - description: number of interrupts in sequence
+    description: |
+      Specifies the PDC pin offset and the number of PDC ports.
+      The tuples indicates the valid mapping of valid PDC ports
+      and their hwirq mapping.
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+  - qcom,pdc-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pdc: interrupt-controller@b220000 {
+        compatible = "qcom,sdm845-pdc", "qcom,pdc";
+        reg = <0xb220000 0x30000>;
+        qcom,pdc-ranges = <0 512 94>, <94 641 15>, <115 662 7>;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&intc>;
+        interrupt-controller;
+    };
+
+    wake-device {
+        interrupts-extended = <&pdc 2 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt
deleted file mode 100644
index e0062aebf025..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-RDA Micro RDA8810PL Interrupt Controller
-
-The interrupt controller in RDA8810PL SoC is a custom interrupt controller
-which supports up to 32 interrupts.
-
-Required properties:
-
-- compatible: Should be "rda,8810pl-intc".
-- reg: Specifies base physical address of the registers set.
-- interrupt-controller: Identifies the node as an interrupt controller.
-- #interrupt-cells: Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 2.
-
-The interrupt sources are as follows:
-
-ID	Name
-------------
-0:	PULSE_DUMMY
-1:	I2C
-2:	NAND_NFSC
-3:	SDMMC1
-4:	SDMMC2
-5:	SDMMC3
-6:	SPI1
-7:	SPI2
-8:	SPI3
-9:	UART1
-10:	UART2
-11:	UART3
-12:	GPIO1
-13:	GPIO2
-14:	GPIO3
-15:	KEYPAD
-16:	TIMER
-17:	TIMEROS
-18:	COMREG0
-19:	COMREG1
-20:	USB
-21:	DMC
-22:	DMA
-23:	CAMERA
-24:	GOUDA
-25:	GPU
-26:	VPU_JPG
-27:	VPU_HOST
-28:	VOC
-29:	AUIFC0
-30:	AUIFC1
-31:	L2CC
-
-Example:
-		apb@20800000 {
-			compatible = "simple-bus";
-			...
-			intc: interrupt-controller@0 {
-				compatible = "rda,8810pl-intc";
-				reg = <0x0 0x1000>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml
new file mode 100644
index 000000000000..96d6285d0087
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/rda,8810pl-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro RDA8810PL interrupt controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    const: rda,8810pl-intc
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - '#interrupt-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    intc: interrupt-controller@0 {
+      compatible = "rda,8810pl-intc";
+      reg = <0x0 0x1000>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
index 9e76fff20323..fb5593724059 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml
@@ -4,7 +4,15 @@
 $id: http://devicetree.org/schemas/interrupt-controller/realtek,rtl-intc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Realtek RTL SoC interrupt controller devicetree bindings
+title: Realtek RTL SoC interrupt controller
+
+description:
+  Interrupt controller and router for Realtek MIPS SoCs, allowing each SoC
+  interrupt to be routed to one parent CPU (hardware) interrupt, or left
+  disconnected.
+  All connected input lines from SoC peripherals can be masked individually,
+  and an interrupt status register is present to indicate which interrupts are
+  pending.
 
 maintainers:
   - Birger Koblitz <mail@birger-koblitz.de>
@@ -13,23 +21,33 @@ maintainers:
 
 properties:
   compatible:
-    const: realtek,rtl-intc
+    oneOf:
+      - items:
+          - enum:
+              - realtek,rtl8380-intc
+          - const: realtek,rtl-intc
+      - const: realtek,rtl-intc
+        deprecated: true
 
   "#interrupt-cells":
+    description:
+      SoC interrupt line index.
     const: 1
 
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 15
+    description:
+      List of parent interrupts, in the order that they are connected to this
+      interrupt router's outputs, starting at the first output.
 
   interrupt-controller: true
 
-  "#address-cells":
-    const: 0
-
   interrupt-map:
+    deprecated: true
     description: Describes mapping from SoC interrupts to CPU interrupts
 
 required:
@@ -37,21 +55,33 @@ required:
   - reg
   - "#interrupt-cells"
   - interrupt-controller
-  - "#address-cells"
-  - interrupt-map
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: realtek,rtl-intc
+    then:
+      properties:
+        "#address-cells":
+          const: 0
+      required:
+        - "#address-cells"
+        - interrupt-map
+    else:
+      required:
+        - interrupts
 
 additionalProperties: false
 
 examples:
   - |
-    intc: interrupt-controller@3000 {
-      compatible = "realtek,rtl-intc";
+    interrupt-controller@3000 {
+      compatible = "realtek,rtl8380-intc", "realtek,rtl-intc";
       #interrupt-cells = <1>;
       interrupt-controller;
-      reg = <0x3000 0x20>;
-      #address-cells = <0>;
-      interrupt-map =
-              <31 &cpuintc 2>,
-              <30 &cpuintc 1>,
-              <29 &cpuintc 5>;
+      reg = <0x3000 0x18>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>, <3>, <4>, <5>, <6>;
     };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt
deleted file mode 100644
index 56e8d82aff34..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8300h-intc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* H8/300H Interrupt controller
-
-Required properties:
-
-- compatible: has to be "renesas,h8300h-intc", "renesas,h8300-intc" as fallback.
-- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
-  interrupts.txt in this directory
-- regs: Base address of interrupt controller registers.
-
-Optional properties:
-
-- any properties, listed in interrupts.txt, and any standard resource allocation
-  properties
-
-Example:
-
-	h8intc: interrupt-controller@fee012 {
-		compatible = "renesas,h8300h-intc", "renesas,h8300-intc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xfee012 7>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt
deleted file mode 100644
index faded2b1559b..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,h8s-intc.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-* H8S Interrupt controller
-
-Required properties:
-
-- compatible: has to be "renesas,h8s-intc", "renesas,h8300-intc" as fallback.
-- #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in
-  interrupts.txt in this directory
-- regs: Base address of interrupt controller registers.
-
-Optional properties:
-
-- any properties, listed in interrupts.txt, and any standard resource allocation
-  properties
-
-Example:
-
-	h8intc: interrupt-controller@fffe00 {
-		compatible = "renesas,h8s-intc", "renesas,h8300-intc";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0xfffe00 24>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
index abb22db3bb28..95033cb514fb 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/interrupt-controller/renesas,irqc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DT bindings for the R-Mobile/R-Car/RZ/G interrupt controller
+title: R-Mobile/R-Car/RZ/G interrupt controller
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
@@ -27,6 +27,7 @@ properties:
           - renesas,intc-ex-r8a774a1    # RZ/G2M
           - renesas,intc-ex-r8a774b1    # RZ/G2N
           - renesas,intc-ex-r8a774c0    # RZ/G2E
+          - renesas,intc-ex-r8a774e1    # RZ/G2H
           - renesas,intc-ex-r8a7795     # R-Car H3
           - renesas,intc-ex-r8a7796     # R-Car M3-W
           - renesas,intc-ex-r8a77961    # R-Car M3-W+
@@ -35,6 +36,8 @@ properties:
           - renesas,intc-ex-r8a77980    # R-Car V3H
           - renesas,intc-ex-r8a77990    # R-Car E3
           - renesas,intc-ex-r8a77995    # R-Car D3
+          - renesas,intc-ex-r8a779a0    # R-Car V3U
+          - renesas,intc-ex-r8a779g0    # R-Car V4H
       - const: renesas,irqc
 
   '#interrupt-cells':
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
new file mode 100644
index 000000000000..33b90e975e33
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rzg2l-irqc.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/renesas,rzg2l-irqc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) Interrupt Controller (IA55)
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+  IA55 performs various interrupt controls including synchronization for the external
+  interrupts of NMI, IRQ, and GPIOINT and the interrupts of the built-in peripheral
+  interrupts output by each IP. And it notifies the interrupt to the GIC
+    - IRQ sense select for 8 external interrupts, mapped to 8 GIC SPI interrupts
+    - GPIO pins used as external interrupt input pins, mapped to 32 GIC SPI interrupts
+    - NMI edge select (NMI is not treated as NMI exception and supports fall edge and
+      stand-up edge detection interrupts)
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-irqc    # RZ/G2{L,LC}
+          - renesas,r9a07g054-irqc    # RZ/V2L
+      - const: renesas,rzg2l-irqc
+
+  '#interrupt-cells':
+    description: The first cell should contain external interrupt number (IRQ0-7) and the
+                 second cell is used to specify the flag.
+    const: 2
+
+  '#address-cells':
+    const: 0
+
+  interrupt-controller: true
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 41
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: clk
+      - const: pclk
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#interrupt-cells'
+  - '#address-cells'
+  - interrupt-controller
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    irqc: interrupt-controller@110a0000 {
+            compatible = "renesas,r9a07g044-irqc", "renesas,rzg2l-irqc";
+            reg = <0x110a0000 0x10000>;
+            #interrupt-cells = <2>;
+            #address-cells = <0>;
+            interrupt-controller;
+            interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD R9A07G044_IA55_CLK>,
+                     <&cpg CPG_MOD R9A07G044_IA55_PCLK>;
+            clock-names = "clk", "pclk";
+            power-domains = <&cpg>;
+            resets = <&cpg R9A07G044_IA55_RESETN>;
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml
index d631b7589d50..72456a07dac9 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,exynos4210-combiner.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Samsung Exynos SoC Interrupt Combiner Controller
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   Samsung's Exynos4 architecture includes a interrupt combiner controller which
diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt
deleted file mode 100644
index c54c5a9a2a90..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Samsung S3C24XX Interrupt Controllers
-
-The S3C24XX SoCs contain a custom set of interrupt controllers providing a
-varying number of interrupt sources. The set consists of a main- and sub-
-controller and on newer SoCs even a second main controller.
-
-Required properties:
-- compatible: Compatible property value should be "samsung,s3c2410-irq"
-  for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later.
-
-- reg: Physical base address of the controller and length of memory mapped
-  region.
-
-- interrupt-controller : Identifies the node as an interrupt controller
-
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 4 and interrupt descriptor shall
-  have the following format:
-      <ctrl_num parent_irq ctrl_irq type>
-
-  ctrl_num contains the controller to use:
-      - 0 ... main controller
-      - 1 ... sub controller
-      - 2 ... second main controller on s3c2416 and s3c2450
-  parent_irq contains the parent bit in the main controller and will be
-             ignored in main controllers
-  ctrl_irq contains the interrupt bit of the controller
-  type contains the trigger type to use
-
-Example:
-
-	interrupt-controller@4a000000 {
-		compatible = "samsung,s3c2410-irq";
-		reg = <0x4a000000 0x100>;
-		interrupt-controller;
-		#interrupt-cells=<4>;
-	};
-
-	[...]
-
-	serial@50000000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50000000 0x4000>;
-		interrupt-parent = <&subintc>;
-		interrupts = <1 28 0 4>, <1 28 1 4>;
-	};
-
-	rtc@57000000 {
-		compatible = "samsung,s3c2410-rtc";
-		reg = <0x57000000 0x100>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 30 0 3>, <0 8 0 3>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index 08d5a57ce00f..f75736a061af 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -26,27 +26,51 @@ description:
   with priority below this threshold will not cause the PLIC to raise its
   interrupt line leading to the context.
 
-  While the PLIC supports both edge-triggered and level-triggered interrupts,
-  interrupt handlers are oblivious to this distinction and therefore it is not
-  specified in the PLIC device-tree binding.
+  The PLIC supports both edge-triggered and level-triggered interrupts. For
+  edge-triggered interrupts, the RISC-V PLIC spec allows two responses to edges
+  seen while an interrupt handler is active; the PLIC may either queue them or
+  ignore them. In the first case, handlers are oblivious to the trigger type, so
+  it is not included in the interrupt specifier. In the second case, software
+  needs to know the trigger type, so it can reorder the interrupt flow to avoid
+  missing interrupts. This special handling is needed by at least the Renesas
+  RZ/Five SoC (AX45MP AndesCore with a NCEPLIC100) and the T-HEAD C900 PLIC.
 
   While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
   "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
   contains a specific memory layout, which is documented in chapter 8 of the
   SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
 
+  The thead,c900-plic is different from sifive,plic-1.0.0 in opensbi, the
+  T-HEAD PLIC implementation requires setting a delegation bit to allow access
+  from S-mode. So add thead,c900-plic to distinguish them.
+
 maintainers:
-  - Sagar Kadam <sagar.kadam@sifive.com>
   - Paul Walmsley  <paul.walmsley@sifive.com>
   - Palmer Dabbelt <palmer@dabbelt.com>
 
 properties:
   compatible:
-    items:
-      - enum:
-          - sifive,fu540-c000-plic
-          - canaan,k210-plic
-      - const: sifive,plic-1.0.0
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a07g043-plic
+          - const: andestech,nceplic100
+      - items:
+          - enum:
+              - sifive,fu540-c000-plic
+              - starfive,jh7100-plic
+              - starfive,jh7110-plic
+              - canaan,k210-plic
+          - const: sifive,plic-1.0.0
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-plic
+          - const: thead,c900-plic
+      - items:
+          - const: sifive,plic-1.0.0
+          - const: riscv,plic0
+        deprecated: true
+        description: For the QEMU virt machine only
 
   reg:
     maxItems: 1
@@ -54,23 +78,29 @@ properties:
   '#address-cells':
     const: 0
 
-  '#interrupt-cells':
-    const: 1
+  '#interrupt-cells': true
 
   interrupt-controller: true
 
   interrupts-extended:
     minItems: 1
+    maxItems: 15872
     description:
       Specifies which contexts are connected to the PLIC, with "-1" specifying
       that a context is not present. Each node pointed to should be a
       riscv,cpu-intc node, which has a riscv node as parent.
 
   riscv,ndev:
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     description:
       Specifies how many external interrupts are supported by this controller.
 
+  clocks: true
+
+  power-domains: true
+
+  resets: true
+
 required:
   - compatible
   - '#address-cells'
@@ -80,6 +110,47 @@ required:
   - interrupts-extended
   - riscv,ndev
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - andestech,nceplic100
+              - thead,c900-plic
+
+    then:
+      properties:
+        '#interrupt-cells':
+          const: 2
+
+    else:
+      properties:
+        '#interrupt-cells':
+          const: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g043-plic
+
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        power-domains:
+          maxItems: 1
+
+        resets:
+          maxItems: 1
+
+      required:
+        - clocks
+        - power-domains
+        - resets
+
 additionalProperties: false
 
 examples:
@@ -89,12 +160,11 @@ examples:
       #interrupt-cells = <1>;
       compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
       interrupt-controller;
-      interrupts-extended = <
-        &cpu0_intc 11
-        &cpu1_intc 11 &cpu1_intc 9
-        &cpu2_intc 11 &cpu2_intc 9
-        &cpu3_intc 11 &cpu3_intc 9
-        &cpu4_intc 11 &cpu4_intc 9>;
+      interrupts-extended = <&cpu0_intc 11>,
+                            <&cpu1_intc 11>, <&cpu1_intc 9>,
+                            <&cpu2_intc 11>, <&cpu2_intc 9>,
+                            <&cpu3_intc 11>, <&cpu3_intc 9>,
+                            <&cpu4_intc 11>, <&cpu4_intc 9>;
       reg = <0xc000000 0x4000000>;
       riscv,ndev = <10>;
     };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
deleted file mode 100644
index dac0846fe789..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Socionext SynQuacer External Interrupt Unit (EXIU)
-
-The Socionext Synquacer SoC has an external interrupt unit (EXIU)
-that forwards a block of 32 configurable input lines to 32 adjacent
-level-high type GICv3 SPIs.
-
-Required properties:
-
-- compatible           : Should be "socionext,synquacer-exiu".
-- reg                  : Specifies base physical address and size of the
-                         control registers.
-- interrupt-controller : Identifies the node as an interrupt controller.
-- #interrupt-cells     : Specifies the number of cells needed to encode an
-                         interrupt source. The value must be 3.
-- socionext,spi-base   : The SPI number of the first SPI of the 32 adjacent
-                         ones the EXIU forwards its interrups to.
-
-Notes:
-
-- Only SPIs can use the EXIU as an interrupt parent.
-
-Example:
-
-	exiu: interrupt-controller@510c0000 {
-		compatible = "socionext,synquacer-exiu";
-		reg = <0x0 0x510c0000 0x0 0x20>;
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		#interrupt-cells = <3>;
-		socionext,spi-base = <112>;
-	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.yaml b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.yaml
new file mode 100644
index 000000000000..92cec2255cca
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/socionext,synquacer-exiu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext SynQuacer External Interrupt Unit (EXIU)
+
+maintainers:
+  - Ard Biesheuvel <ardb@kernel.org>
+
+description: |+
+  The Socionext SynQuacer SoC has an external interrupt unit (EXIU)
+  that forwards a block of 32 configurable input lines to 32 adjacent
+  level-high type GICv3 SPIs.
+
+properties:
+  compatible:
+    const: socionext,synquacer-exiu
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 3
+
+  interrupt-controller: true
+
+  socionext,spi-base:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The SPI number of the first SPI of the 32 adjacent ones the
+      EXIU forwards its interrupts to.
+
+required:
+  - compatible
+  - reg
+  - '#interrupt-cells'
+  - interrupt-controller
+  - socionext,spi-base
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interrupt-controller@510c0000 {
+        compatible = "socionext,synquacer-exiu";
+        reg = <0x510c0000 0x20>;
+        interrupt-controller;
+        interrupt-parent = <&gic>;
+        #interrupt-cells = <3>;
+        socionext,spi-base = <112>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
index f89ebde76dab..de7c5e59bae1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,uniphier-aidet.yaml
@@ -30,6 +30,7 @@ properties:
       - socionext,uniphier-ld11-aidet
       - socionext,uniphier-ld20-aidet
       - socionext,uniphier-pxs3-aidet
+      - socionext,uniphier-nx1-aidet
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt b/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt
index ced6014061a3..977d7ed3670e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt
@@ -6,11 +6,7 @@ and PL310 L2 Cache IRQs are controlled using System Configuration registers.
 This driver is used to unmask them prior to use.
 
 Required properties:
-- compatible	: Should be set to one of:
-			"st,stih415-irq-syscfg"
-			"st,stih416-irq-syscfg"
-			"st,stih407-irq-syscfg"
-			"st,stid127-irq-syscfg"
+- compatible	: Should be "st,stih407-irq-syscfg"
 - st,syscfg	: Phandle to Cortex-A9 IRQ system config registers
 - st,irq-device	: Array of IRQs to enable - should be 2 in length
 - st,fiq-device	: Array of FIQs to enable - should be 2 in length
@@ -25,11 +21,10 @@ Optional properties:
 Example:
 
 irq-syscfg {
-	compatible    = "st,stih416-irq-syscfg";
+	compatible    = "st,stih407-irq-syscfg";
 	st,syscfg     = <&syscfg_cpu>;
 	st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
 			<ST_IRQ_SYSCFG_PMU_1>;
 	st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
 			<ST_IRQ_SYSCFG_DISABLED>;
-	st,invert-ext = <(ST_IRQ_SYSCFG_EXT_1_INV | ST_IRQ_SYSCFG_EXT_3_INV)>;
 };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
index 6d3e68eb2e8b..00c10a8258f1 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.yaml
@@ -4,11 +4,11 @@
 $id: http://devicetree.org/schemas/interrupt-controller/st,stm32-exti.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STM32 External Interrupt Controller Device Tree Bindings
+title: STM32 External Interrupt Controller
 
 maintainers:
-  - Alexandre Torgue <alexandre.torgue@st.com>
-  - Ludovic Barre <ludovic.barre@st.com>
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Ludovic Barre <ludovic.barre@foss.st.com>
 
 properties:
   compatible:
@@ -20,6 +20,7 @@ properties:
       - items:
           - enum:
               - st,stm32mp1-exti
+              - st,stm32mp13-exti
           - const: syscon
 
   "#interrupt-cells":
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
new file mode 100644
index 000000000000..bd0021dbab0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sunplus,sp7021-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 SoC Interrupt Controller
+
+maintainers:
+  - Qin Jian <qinjian@cqplus1.com>
+
+properties:
+  compatible:
+    items:
+      - const: sunplus,sp7021-intc
+
+  reg:
+    maxItems: 2
+    description:
+      Specifies base physical address(s) and size of the controller regs.
+      The 1st region include type/polarity/priority/mask regs.
+      The 2nd region include clear/masked_ext0/masked_ext1/group regs.
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger
+      type as defined in interrupt.txt in this directory.
+
+  interrupts:
+    maxItems: 2
+    description:
+      EXT_INT0 & EXT_INT1, 2 interrupts references to primary interrupt
+      controller.
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    intc: interrupt-controller@9c000780 {
+        compatible = "sunplus,sp7021-intc";
+        reg = <0x9c000780 0x80>, <0x9c000a80 0x80>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, /* EXT_INT0 */
+                     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; /* EXT_INT1 */
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
index 3d89668573e8..6a49d74b992a 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
@@ -59,6 +59,9 @@ properties:
 
   interrupt-controller: true
 
+  '#interrupt-cells':
+    const: 0
+
   msi-controller: true
 
   ti,interrupt-ranges:
@@ -77,9 +80,14 @@ properties:
 
   ti,unmapped-event-sources:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
     description:
       Array of phandles to DMA controllers where the unmapped events originate.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
index e12aee42b126..c99cc7323c71 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
@@ -58,6 +58,9 @@ properties:
         1 = If intr supports edge triggered interrupts.
         4 = If intr supports level triggered interrupts.
 
+  reg:
+    maxItems: 1
+
   interrupt-controller: true
 
   '#interrupt-cells':
diff --git a/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
index 5e125cf2a88b..e20016f12017 100644
--- a/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
+++ b/Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/iommu/allwinner,sun50i-h6-iommu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner H6 IOMMU Device Tree Bindings
+title: Allwinner H6 IOMMU
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/iommu/apple,dart.yaml b/Documentation/devicetree/bindings/iommu/apple,dart.yaml
index 94aa9e9afa59..903edf85d72e 100644
--- a/Documentation/devicetree/bindings/iommu/apple,dart.yaml
+++ b/Documentation/devicetree/bindings/iommu/apple,dart.yaml
@@ -22,7 +22,10 @@ description: |+
 
 properties:
   compatible:
-    const: apple,t8103-dart
+    enum:
+      - apple,t8103-dart
+      - apple,t8110-dart
+      - apple,t6000-dart
 
   reg:
     maxItems: 1
@@ -41,6 +44,9 @@ properties:
       Has to be one. The single cell describes the stream id emitted by
       a master to the IOMMU.
 
+  power-domains:
+    maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/iommu/apple,sart.yaml b/Documentation/devicetree/bindings/iommu/apple,sart.yaml
new file mode 100644
index 000000000000..e87c1520fea6
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/apple,sart.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/apple,sart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SART DMA address filter
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+description:
+  Apple SART is a simple address filter for DMA transactions. Regions of
+  physical memory must be added to the SART's allow list before any
+  DMA can target these. Unlike a proper IOMMU no remapping can be done and
+  special support in the consumer driver is required since not all DMA
+  transactions of a single device are subject to SART filtering.
+
+  SART1 has first been used since at least the A11 (iPhone 8 and iPhone X)
+  and allows 36 bit of physical address space and filter entries with sizes
+  up to 24 bit.
+
+  SART2, first seen in A14 and M1, allows 36 bit of physical address space
+  and filter entry size up to 36 bit.
+
+  SART3, first seen in M1 Pro/Max, extends both the address space and filter
+  entry size to 42 bit.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: apple,t8112-sart
+          - const: apple,t6000-sart
+      - enum:
+          - apple,t6000-sart
+          - apple,t8103-sart
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    iommu@7bc50000 {
+      compatible = "apple,t8103-sart";
+      reg = <0x7bc50000 0x4000>;
+    };
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
index e87bfbcc6913..75fcf4cb52d9 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu-v3.yaml
@@ -37,12 +37,13 @@ properties:
           hardware supports just a single, combined interrupt line.
           If provided, then the combined interrupt will be used in preference to
           any others.
-      - minItems: 2
+      - minItems: 1
         items:
-          - const: eventq     # Event Queue not empty
-          - const: gerror     # Global Error activated
-          - const: priq       # PRI Queue not empty
-          - const: cmdq-sync  # CMD_SYNC complete
+          enum:
+            - eventq      # Event Queue not empty
+            - gerror      # Global Error activated
+            - cmdq-sync   # CMD_SYNC complete
+            - priq        # PRI Queue not empty
 
   '#iommu-cells':
     const: 1
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index 03f2b2d4db30..ba677d401e24 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -28,26 +28,90 @@ properties:
           - enum:
               - qcom,msm8996-smmu-v2
               - qcom,msm8998-smmu-v2
+              - qcom,sdm630-smmu-v2
           - const: qcom,smmu-v2
 
-      - description: Qcom SoCs implementing "arm,mmu-500"
+      - description: Qcom SoCs implementing "qcom,smmu-500" and "arm,mmu-500"
         items:
           - enum:
+              - qcom,qcm2290-smmu-500
+              - qcom,qdu1000-smmu-500
+              - qcom,sa8775p-smmu-500
               - qcom,sc7180-smmu-500
               - qcom,sc7280-smmu-500
               - qcom,sc8180x-smmu-500
+              - qcom,sc8280xp-smmu-500
+              - qcom,sdm670-smmu-500
               - qcom,sdm845-smmu-500
+              - qcom,sdx55-smmu-500
+              - qcom,sdx65-smmu-500
+              - qcom,sm6115-smmu-500
+              - qcom,sm6125-smmu-500
+              - qcom,sm6350-smmu-500
+              - qcom,sm6375-smmu-500
               - qcom,sm8150-smmu-500
               - qcom,sm8250-smmu-500
               - qcom,sm8350-smmu-500
+              - qcom,sm8450-smmu-500
+              - qcom,sm8550-smmu-500
+          - const: qcom,smmu-500
+          - const: arm,mmu-500
+
+      - description: Qcom SoCs implementing "arm,mmu-500" (legacy binding)
+        deprecated: true
+        items:
+          # Do not add additional SoC to this list. Instead use two previous lists.
+          - enum:
+              - qcom,qcm2290-smmu-500
+              - qcom,sc7180-smmu-500
+              - qcom,sc7280-smmu-500
+              - qcom,sc8180x-smmu-500
+              - qcom,sc8280xp-smmu-500
+              - qcom,sdm845-smmu-500
+              - qcom,sm6115-smmu-500
+              - qcom,sm6350-smmu-500
+              - qcom,sm6375-smmu-500
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+              - qcom,sm8350-smmu-500
+              - qcom,sm8450-smmu-500
+          - const: arm,mmu-500
+      - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500"
+        items:
+          - enum:
+              - qcom,sc7280-smmu-500
+              - qcom,sm6115-smmu-500
+              - qcom,sm6125-smmu-500
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+              - qcom,sm8350-smmu-500
+          - const: qcom,adreno-smmu
+          - const: qcom,smmu-500
+          - const: arm,mmu-500
+      - description: Qcom Adreno GPUs implementing "arm,mmu-500" (legacy binding)
+        deprecated: true
+        items:
+          # Do not add additional SoC to this list. Instead use previous list.
+          - enum:
+              - qcom,sc7280-smmu-500
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+          - const: qcom,adreno-smmu
           - const: arm,mmu-500
       - description: Qcom Adreno GPUs implementing "arm,smmu-v2"
         items:
           - enum:
+              - qcom,msm8996-smmu-v2
               - qcom,sc7180-smmu-v2
+              - qcom,sdm630-smmu-v2
               - qcom,sdm845-smmu-v2
+              - qcom,sm6350-smmu-v2
           - const: qcom,adreno-smmu
           - const: qcom,smmu-v2
+      - description: Qcom Adreno GPUs on Google Cheza platform
+        items:
+          - const: qcom,sdm845-smmu-v2
+          - const: qcom,smmu-v2
       - description: Marvell SoCs implementing "arm,mmu-500"
         items:
           - const: marvell,ap806-smmu-500
@@ -58,8 +122,9 @@ properties:
           for improved performance.
         items:
           - enum:
-              - nvidia,tegra194-smmu
               - nvidia,tegra186-smmu
+              - nvidia,tegra194-smmu
+              - nvidia,tegra234-smmu
           - const: nvidia,smmu-500
       - items:
           - const: arm,mmu-500
@@ -139,19 +204,27 @@ properties:
       present in such cases.
 
   clock-names:
-    items:
-      - const: bus
-      - const: iface
+    minItems: 1
+    maxItems: 7
 
   clocks:
-    items:
-      - description: bus clock required for downstream bus access and for the
-          smmu ptw
-      - description: interface clock required to access smmu's registers
-          through the TCU's programming interface.
+    minItems: 1
+    maxItems: 7
 
   power-domains:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  nvidia,memory-controller:
+    description: |
+      A phandle to the memory controller on NVIDIA Tegra186 and later SoCs.
+      The memory controller needs to be programmed with a mapping of memory
+      client IDs to ARM SMMU stream IDs.
+
+      If this property is absent, the mapping programmed by early firmware
+      will be used and it is not guaranteed that IOMMU translations will be
+      enabled for any given device.
+    $ref: /schemas/types.yaml#/definitions/phandle
 
 required:
   - compatible
@@ -168,18 +241,216 @@ allOf:
         compatible:
           contains:
             enum:
-              - nvidia,tegra194-smmu
               - nvidia,tegra186-smmu
+              - nvidia,tegra194-smmu
+              - nvidia,tegra234-smmu
     then:
       properties:
         reg:
           minItems: 1
           maxItems: 2
+
+      # The reference to the memory controller is required to ensure that the
+      # memory client to stream ID mapping can be done synchronously with the
+      # IOMMU attachment.
+      required:
+        - nvidia,memory-controller
     else:
       properties:
         reg:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-smmu-v2
+              - qcom,sdm630-smmu-v2
+    then:
+      anyOf:
+        - properties:
+            clock-names:
+              items:
+                - const: bus
+            clocks:
+              items:
+                - description: bus clock required for downstream bus access and for
+                    the smmu ptw
+        - properties:
+            clock-names:
+              items:
+                - const: iface
+                - const: mem
+                - const: mem_iface
+            clocks:
+              items:
+                - description: interface clock required to access smmu's registers
+                    through the TCU's programming interface.
+                - description: bus clock required for memory access
+                - description: bus clock required for GPU memory access
+        - properties:
+            clock-names:
+              items:
+                - const: iface-mm
+                - const: iface-smmu
+                - const: bus-mm
+                - const: bus-smmu
+            clocks:
+              items:
+                - description: interface clock required to access mnoc's registers
+                    through the TCU's programming interface.
+                - description: interface clock required to access smmu's registers
+                    through the TCU's programming interface.
+                - description: bus clock required for downstream bus access
+                - description: bus clock required for the smmu ptw
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-smmu-v2
+              - qcom,sc7180-smmu-v2
+              - qcom,sdm845-smmu-v2
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: bus
+            - const: iface
+
+        clocks:
+          items:
+            - description: bus clock required for downstream bus access and for
+                the smmu ptw
+            - description: interface clock required to access smmu's registers
+                through the TCU's programming interface.
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sc7280-smmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: gcc_gpu_memnoc_gfx_clk
+            - const: gcc_gpu_snoc_dvm_gfx_clk
+            - const: gpu_cc_ahb_clk
+            - const: gpu_cc_hlos1_vote_gpu_smmu_clk
+            - const: gpu_cc_cx_gmu_clk
+            - const: gpu_cc_hub_cx_int_clk
+            - const: gpu_cc_hub_aon_clk
+
+        clocks:
+          items:
+            - description: GPU memnoc_gfx clock
+            - description: GPU snoc_dvm_gfx clock
+            - description: GPU ahb clock
+            - description: GPU hlos1_vote_GPU smmu clock
+            - description: GPU cx_gmu clock
+            - description: GPU hub_cx_int clock
+            - description: GPU hub_aon clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm6350-smmu-v2
+              - qcom,sm8150-smmu-500
+              - qcom,sm8250-smmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: ahb
+            - const: bus
+            - const: iface
+
+        clocks:
+          items:
+            - description: bus clock required for AHB bus access
+            - description: bus clock required for downstream bus access and for
+                the smmu ptw
+            - description: interface clock required to access smmu's registers
+                through the TCU's programming interface.
+
+  - if:
+      properties:
+        compatible:
+          items:
+            - enum:
+                - qcom,sm6115-smmu-500
+                - qcom,sm6125-smmu-500
+            - const: qcom,adreno-smmu
+            - const: qcom,smmu-500
+            - const: arm,mmu-500
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: mem
+            - const: hlos
+            - const: iface
+
+        clocks:
+          items:
+            - description: GPU memory bus clock
+            - description: Voter clock required for HLOS SMMU access
+            - description: Interface clock required for register access
+
+  # Disallow clocks for all other platforms with specific compatibles
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cavium,smmu-v2
+              - marvell,ap806-smmu-500
+              - nvidia,smmu-500
+              - qcom,qcm2290-smmu-500
+              - qcom,qdu1000-smmu-500
+              - qcom,sa8775p-smmu-500
+              - qcom,sc7180-smmu-500
+              - qcom,sc8180x-smmu-500
+              - qcom,sc8280xp-smmu-500
+              - qcom,sdm670-smmu-500
+              - qcom,sdm845-smmu-500
+              - qcom,sdx55-smmu-500
+              - qcom,sdx65-smmu-500
+              - qcom,sm6350-smmu-500
+              - qcom,sm6375-smmu-500
+              - qcom,sm8350-smmu-500
+              - qcom,sm8450-smmu-500
+              - qcom,sm8550-smmu-500
+    then:
+      properties:
+        clock-names: false
+        clocks: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sm6375-smmu-500
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: SNoC MMU TBU RT GDSC
+            - description: SNoC MMU TBU NRT GDSC
+            - description: SNoC TURING MMU TBU0 GDSC
+
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains:
+          maxItems: 1
+
 examples:
   - |+
     /* SMMU with stream matching or stream indexing */
diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
index 0f26fe14c8e2..5b6395bc10e0 100644
--- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
+++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
@@ -73,10 +73,16 @@ properties:
           - mediatek,mt2701-m4u  # generation one
           - mediatek,mt2712-m4u  # generation two
           - mediatek,mt6779-m4u  # generation two
+          - mediatek,mt6795-m4u  # generation two
           - mediatek,mt8167-m4u  # generation two
           - mediatek,mt8173-m4u  # generation two
           - mediatek,mt8183-m4u  # generation two
+          - mediatek,mt8186-iommu-mm         # generation two
           - mediatek,mt8192-m4u  # generation two
+          - mediatek,mt8195-iommu-vdo        # generation two
+          - mediatek,mt8195-iommu-vpp        # generation two
+          - mediatek,mt8195-iommu-infra      # generation two
+          - mediatek,mt8365-m4u  # generation two
 
       - description: mt7623 generation one
         items:
@@ -97,10 +103,16 @@ properties:
     items:
       - const: bclk
 
+  mediatek,infracfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: The phandle to the mediatek infracfg syscon
+
   mediatek,larbs:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 32
+    items:
+      maxItems: 1
     description: |
       List of phandle to the local arbiters in the current Socs.
       Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. It must sort
@@ -114,10 +126,14 @@ properties:
       dt-binding/memory/mt2701-larb-port.h for mt2701 and mt7623,
       dt-binding/memory/mt2712-larb-port.h for mt2712,
       dt-binding/memory/mt6779-larb-port.h for mt6779,
+      dt-binding/memory/mt6795-larb-port.h for mt6795,
       dt-binding/memory/mt8167-larb-port.h for mt8167,
       dt-binding/memory/mt8173-larb-port.h for mt8173,
       dt-binding/memory/mt8183-larb-port.h for mt8183,
+      dt-binding/memory/mt8186-memory-port.h for mt8186,
       dt-binding/memory/mt8192-larb-port.h for mt8192.
+      dt-binding/memory/mt8195-memory-port.h for mt8195.
+      dt-binding/memory/mediatek,mt8365-larb-port.h for mt8365.
 
   power-domains:
     maxItems: 1
@@ -126,7 +142,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - mediatek,larbs
   - '#iommu-cells'
 
 allOf:
@@ -137,8 +152,12 @@ allOf:
             enum:
               - mediatek,mt2701-m4u
               - mediatek,mt2712-m4u
+              - mediatek,mt6795-m4u
               - mediatek,mt8173-m4u
+              - mediatek,mt8186-iommu-mm
               - mediatek,mt8192-m4u
+              - mediatek,mt8195-iommu-vdo
+              - mediatek,mt8195-iommu-vpp
 
     then:
       required:
@@ -148,12 +167,39 @@ allOf:
       properties:
         compatible:
           enum:
+            - mediatek,mt8186-iommu-mm
             - mediatek,mt8192-m4u
+            - mediatek,mt8195-iommu-vdo
+            - mediatek,mt8195-iommu-vpp
 
     then:
       required:
         - power-domains
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2712-m4u
+              - mediatek,mt6795-m4u
+              - mediatek,mt8173-m4u
+
+    then:
+      required:
+        - mediatek,infracfg
+
+  - if: # The IOMMUs don't have larbs.
+      not:
+        properties:
+          compatible:
+            contains:
+              const: mediatek,mt8195-iommu-infra
+
+    then:
+      required:
+        - mediatek,larbs
+
 additionalProperties: false
 
 examples:
@@ -167,17 +213,8 @@ examples:
             interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
             clocks = <&infracfg CLK_INFRA_M4U>;
             clock-names = "bclk";
-            mediatek,larbs = <&larb0 &larb1 &larb2
-                              &larb3 &larb4 &larb5>;
+            mediatek,infracfg = <&infracfg>;
+            mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
+                             <&larb3>, <&larb4>, <&larb5>;
             #iommu-cells = <1>;
     };
-
-  - |
-    #include <dt-bindings/memory/mt8173-larb-port.h>
-
-    /* Example for a client device */
-    display {
-           compatible = "mediatek,mt8173-disp";
-           iommus = <&iommu M4U_PORT_DISP_OVL0>,
-                    <&iommu M4U_PORT_DISP_RDMA0>;
-     };
diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
deleted file mode 100644
index 059139abce35..000000000000
--- a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
+++ /dev/null
@@ -1,121 +0,0 @@
-* QCOM IOMMU v1 Implementation
-
-Qualcomm "B" family devices which are not compatible with arm-smmu have
-a similar looking IOMMU but without access to the global register space,
-and optionally requiring additional configuration to route context irqs
-to non-secure vs secure interrupt line.
-
-** Required properties:
-
-- compatible       : Should be one of:
-
-                        "qcom,msm8916-iommu"
-
-                     Followed by "qcom,msm-iommu-v1".
-
-- clock-names      : Should be a pair of "iface" (required for IOMMUs
-                     register group access) and "bus" (required for
-                     the IOMMUs underlying bus access).
-
-- clocks           : Phandles for respective clocks described by
-                     clock-names.
-
-- #address-cells   : must be 1.
-
-- #size-cells      : must be 1.
-
-- #iommu-cells     : Must be 1.  Index identifies the context-bank #.
-
-- ranges           : Base address and size of the iommu context banks.
-
-- qcom,iommu-secure-id  : secure-id.
-
-- List of sub-nodes, one per translation context bank.  Each sub-node
-  has the following required properties:
-
-  - compatible     : Should be one of:
-        - "qcom,msm-iommu-v1-ns"  : non-secure context bank
-        - "qcom,msm-iommu-v1-sec" : secure context bank
-  - reg            : Base address and size of context bank within the iommu
-  - interrupts     : The context fault irq.
-
-** Optional properties:
-
-- reg              : Base address and size of the SMMU local base, should
-                     be only specified if the iommu requires configuration
-                     for routing of context bank irq's to secure vs non-
-                     secure lines.  (Ie. if the iommu contains secure
-                     context banks)
-
-
-** Examples:
-
-	apps_iommu: iommu@1e20000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#iommu-cells = <1>;
-		compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
-		ranges = <0 0x1e20000 0x40000>;
-		reg = <0x1ef0000 0x3000>;
-		clocks = <&gcc GCC_SMMU_CFG_CLK>,
-			 <&gcc GCC_APSS_TCU_CLK>;
-		clock-names = "iface", "bus";
-		qcom,iommu-secure-id = <17>;
-
-		// mdp_0:
-		iommu-ctx@4000 {
-			compatible = "qcom,msm-iommu-v1-ns";
-			reg = <0x4000 0x1000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		// venus_ns:
-		iommu-ctx@5000 {
-			compatible = "qcom,msm-iommu-v1-sec";
-			reg = <0x5000 0x1000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	gpu_iommu: iommu@1f08000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#iommu-cells = <1>;
-		compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
-		ranges = <0 0x1f08000 0x10000>;
-		clocks = <&gcc GCC_SMMU_CFG_CLK>,
-			 <&gcc GCC_GFX_TCU_CLK>;
-		clock-names = "iface", "bus";
-		qcom,iommu-secure-id = <18>;
-
-		// gfx3d_user:
-		iommu-ctx@1000 {
-			compatible = "qcom,msm-iommu-v1-ns";
-			reg = <0x1000 0x1000>;
-			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		// gfx3d_priv:
-		iommu-ctx@2000 {
-			compatible = "qcom,msm-iommu-v1-ns";
-			reg = <0x2000 0x1000>;
-			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	...
-
-	venus: video-codec@1d00000 {
-		...
-		iommus = <&apps_iommu 5>;
-	};
-
-	mdp: mdp@1a01000 {
-		...
-		iommus = <&apps_iommu 4>;
-	};
-
-	gpu@1c00000 {
-		...
-		iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
-	};
diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml
new file mode 100644
index 000000000000..d9fabdf930d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/qcom,iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies legacy IOMMU implementations
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm "B" family devices which are not compatible with arm-smmu have
+  a similar looking IOMMU, but without access to the global register space
+  and optionally requiring additional configuration to route context IRQs
+  to non-secure vs secure interrupt line.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,msm8916-iommu
+          - qcom,msm8953-iommu
+      - const: qcom,msm-iommu-v1
+
+  clocks:
+    items:
+      - description: Clock required for IOMMU register group access
+      - description: Clock required for underlying bus access
+
+  clock-names:
+    items:
+      - const: iface
+      - const: bus
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  qcom,iommu-secure-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The SCM secure ID of the IOMMU instance.
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#iommu-cells':
+    const: 1
+
+patternProperties:
+  "^iommu-ctx@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        enum:
+          - qcom,msm-iommu-v1-ns
+          - qcom,msm-iommu-v1-sec
+
+      interrupts:
+        maxItems: 1
+
+      reg:
+        maxItems: 1
+
+    required:
+      - compatible
+      - interrupts
+      - reg
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+  - '#iommu-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    apps_iommu: iommu@1e20000 {
+      compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+      reg = <0x01ef0000 0x3000>;
+      clocks = <&gcc GCC_SMMU_CFG_CLK>,
+               <&gcc GCC_APSS_TCU_CLK>;
+      clock-names = "iface", "bus";
+      qcom,iommu-secure-id = <17>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      #iommu-cells = <1>;
+      ranges = <0 0x01e20000 0x40000>;
+
+      /* mdp_0: */
+      iommu-ctx@4000 {
+        compatible = "qcom,msm-iommu-v1-ns";
+        reg = <0x4000 0x1000>;
+        interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
index 02c69a95c332..be90f68c11d1 100644
--- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
+++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.yaml
@@ -29,6 +29,7 @@ properties:
               - renesas,ipmmu-r8a7793  # R-Car M2-N
               - renesas,ipmmu-r8a7794  # R-Car E2
           - const: renesas,ipmmu-vmsa  # R-Mobile APE6 or R-Car Gen2 or RZ/G1
+
       - items:
           - enum:
               - renesas,ipmmu-r8a774a1 # RZ/G2M
@@ -44,6 +45,13 @@ properties:
               - renesas,ipmmu-r8a77990 # R-Car E3
               - renesas,ipmmu-r8a77995 # R-Car D3
 
+      - items:
+          - enum:
+              - renesas,ipmmu-r8a779a0           # R-Car V3U
+              - renesas,ipmmu-r8a779f0           # R-Car S4-8
+              - renesas,ipmmu-r8a779g0           # R-Car V4H
+          - const: renesas,rcar-gen4-ipmmu-vmsa  # R-Car Gen4
+
   reg:
     maxItems: 1
 
@@ -65,11 +73,17 @@ properties:
 
   renesas,ipmmu-main:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - minItems: 1
+        items:
+          - description: phandle to main IPMMU
+          - description:
+              The interrupt bit number associated with the particular cache
+              IPMMU device. If present, the interrupt bit number needs to match
+              the main IPMMU IMSSTR register. Only used by cache IPMMU
+              instances.
     description:
-      Reference to the main IPMMU phandle plus 1 cell. The cell is
-      the interrupt bit number associated with the particular cache IPMMU
-      device. The interrupt bit number needs to match the main IPMMU IMSSTR
-      register. Only used by cache IPMMU instances.
+      Reference to the main IPMMU.
 
 required:
   - compatible
@@ -95,6 +109,22 @@ allOf:
       required:
         - power-domains
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rcar-gen4-ipmmu-vmsa
+    then:
+      properties:
+        renesas,ipmmu-main:
+          items:
+            - maxItems: 1
+    else:
+      properties:
+        renesas,ipmmu-main:
+          items:
+            - minItems: 2
+
 examples:
   - |
     #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
index af51b91c893e..672a0beea600 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
@@ -86,16 +86,6 @@ examples:
   - |
     #include <dt-bindings/clock/exynos5250.h>
 
-    gsc_0: scaler@13e00000 {
-      compatible = "samsung,exynos5-gsc";
-      reg = <0x13e00000 0x1000>;
-      interrupts = <0 85 0>;
-      power-domains = <&pd_gsc>;
-      clocks = <&clock CLK_GSCL0>;
-      clock-names = "gscl";
-      iommus = <&sysmmu_gsc0>;
-    };
-
     sysmmu_gsc0: iommu@13e80000 {
       compatible = "samsung,exynos-sysmmu";
       reg = <0x13E80000 0x1000>;
@@ -107,4 +97,3 @@ examples:
       power-domains = <&pd_gsc>;
       #iommu-cells = <0>;
     };
-
diff --git a/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
new file mode 100644
index 000000000000..be1539d234f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/xen,grant-dma.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/xen,grant-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xen specific IOMMU for virtualized devices (e.g. virtio)
+
+maintainers:
+  - Stefano Stabellini <sstabellini@kernel.org>
+
+description:
+  The Xen IOMMU represents the Xen grant table interface. Grant mappings
+  are to be used with devices connected to the Xen IOMMU using the "iommus"
+  property, which also specifies the ID of the backend domain.
+  The binding is required to restrict memory access using Xen grant mappings.
+
+properties:
+  compatible:
+    const: xen,grant-dma
+
+  '#iommu-cells':
+    const: 1
+    description:
+      The single cell is the domid (domain ID) of the domain where the backend
+      is running.
+
+required:
+  - compatible
+  - "#iommu-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    iommu {
+        compatible = "xen,grant-dma";
+        #iommu-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
index 028268fd99ee..25f86da804b7 100644
--- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
@@ -9,7 +9,9 @@ Required properties:
 - compatible : should be one of
 	"aspeed,ast2400-ibt-bmc"
 	"aspeed,ast2500-ibt-bmc"
+	"aspeed,ast2600-ibt-bmc"
 - reg: physical address and size of the registers
+- clocks: clock for the device
 
 Optional properties:
 
@@ -22,4 +24,5 @@ Example:
 		compatible = "aspeed,ast2400-ibt-bmc";
 		reg = <0x1e789140 0x18>;
 		interrupts = <8>;
+		clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
 	};
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml
new file mode 100644
index 000000000000..3f25cdb4e99b
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/ipmi-ipmb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IPMI IPMB device
+
+description: IPMI IPMB device bindings
+
+maintainers:
+  - Corey Minyard <cminyard@mvista.com>
+
+properties:
+  compatible:
+    enum:
+      - ipmi-ipmb
+
+  device_type:
+    items:
+      - const: "ipmi"
+
+  reg:
+    maxItems: 1
+
+  bmcaddr:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: The address of the BMC on the IPMB bus.  Defaults to 0x20.
+
+  retry-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Time between retries of sends, in milliseconds.  Defaults to 250.
+
+  max-retries:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of retries before a failure is declared.  Defaults to 1.
+
+  slave-dev:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      The slave i2c device.  If not present, the main device is used. This
+      lets you use two devices on the IPMB, one for master and one for slave,
+      in case you have a slave device that can only be a slave.  The slave
+      will receive messages and the master will transmit.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ipmi-ipmb@40 {
+                    compatible = "ipmi-ipmb";
+                    device_type = "ipmi";
+                    reg = <0x40>;
+                    bmcaddr = /bits/ 8 <0x20>;
+                    retry-time = <250>;
+                    max-retries = <1>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
index 898e3267893a..c1b4bf95ef99 100644
--- a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/ipmi/ipmi-smic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: IPMI device bindings
+title: IPMI device
 
 description: IPMI device bindings
 
diff --git a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt
index 352f5e9c759b..4fda76e63396 100644
--- a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt
+++ b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt
@@ -1,12 +1,13 @@
-* Nuvoton NPCM7xx KCS (Keyboard Controller Style) IPMI interface
+* Nuvoton NPCM KCS (Keyboard Controller Style) IPMI interface
 
-The Nuvoton SOCs (NPCM7xx) are commonly used as BMCs
+The Nuvoton SOCs (NPCM) are commonly used as BMCs
 (Baseboard Management Controllers) and the KCS interface can be
 used to perform in-band IPMI communication with their host.
 
 Required properties:
 - compatible : should be one of
     "nuvoton,npcm750-kcs-bmc"
+    "nuvoton,npcm845-kcs-bmc", "nuvoton,npcm750-kcs-bmc"
 - interrupts : interrupt generated by the controller
 - kcs_chan : The KCS channel number in the controller
 
diff --git a/Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml b/Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml
new file mode 100644
index 000000000000..02b662d780bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/ssif-bmc.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/ssif-bmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SSIF IPMI BMC interface
+
+description: SSIF IPMI BMC device bindings
+
+maintainers:
+  - Quan Nguyen <quan@os.amperecomputing.com>
+
+properties:
+  compatible:
+    enum:
+      - ssif-bmc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ssif-bmc@10 {
+            compatible = "ssif-bmc";
+            reg = <0x10>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/common.yaml b/Documentation/devicetree/bindings/leds/backlight/common.yaml
index 702ba350d869..3b60afbab68b 100644
--- a/Documentation/devicetree/bindings/leds/backlight/common.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/common.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Common backlight properties
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
index 75cc569b9c55..584030b6b0b9 100644
--- a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: gpio-backlight bindings
+title: gpio-backlight
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
new file mode 100644
index 000000000000..e1191453c2f0
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktz8866.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTZ8866 backlight
+
+maintainers:
+  - Jianhua Lu <lujianhua000@gmail.com>
+
+description: |
+  The Kinetic Technologies KTZ8866 is a high efficiency 6-channels-current-sinks
+  led backlight with dual lcd bias power.
+  https://www.kinet-ic.com/ktz8866/
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    const: kinetic,ktz8866
+
+  vddpos-supply:
+    description: positive boost supply regulator.
+
+  vddneg-supply:
+    description: negative boost supply regulator.
+
+  enable-gpios:
+    description: GPIO to use to enable/disable the backlight (HWEN pin).
+    maxItems: 1
+
+  current-num-sinks:
+    description: number of the LED current sinks' channels.
+    enum: [1, 2, 3, 4, 5, 6]
+
+  kinetic,current-ramp-delay-ms:
+    description: |
+      LED current ramping delay time in milliseconds, note that the
+      case 1 will be mapped to 1μs.
+    enum: [1, 2, 4, 8, 16, 32, 64, 128, 192, 256, 320, 384, 448, 512, 576, 640]
+
+  kinetic,led-enable-ramp-delay-ms:
+    description: |
+      LED on/off ramping delay time in milliseconds, note that the case 0 will be
+      mapped to 512μs because ktz8866 can't ramp faster than it.
+    enum: [0, 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096, 8192, 16384]
+
+  kinetic,enable-lcd-bias:
+    description: Set if we want to output bias power supply for LCD.
+    type: boolean
+
+required:
+  - compatible
+  - vddpos-supply
+  - vddneg-supply
+  - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    backlight {
+        compatible = "kinetic,ktz8866";
+
+        vddpos-supply = <&bl_vddpos_5p5>;
+        vddneg-supply = <&bl_vddneg_5p5>;
+        enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+        current-num-sinks = <5>;
+        kinetic,current-ramp-delay-ms = <128>;
+        kinetic,led-enable-ramp-delay-ms = <1>;
+        kinetic,enable-lcd-bias;
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
index 625082bf3892..d7b78198abc2 100644
--- a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/leds/backlight/led-backlight.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: led-backlight bindings
+title: led-backlight
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
@@ -23,6 +23,8 @@ properties:
   leds:
     description: A list of LED nodes
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
 
   brightness-levels:
     description:
diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
index 08fe5cf8614a..3c9b4054ed9a 100644
--- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: TI LM3630A High-Efficiency Dual-String White LED
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
new file mode 100644
index 000000000000..5533b6562d92
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 Backlight
+
+maintainers:
+  - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  The MT6370 Backlight WLED driver supports up to a 29V output voltage for
+  4 channels of 8 series WLEDs. Each channel supports up to 30mA of current
+  capability with 2048 current steps (11 bits, only for MT6370/MT6371) or
+  16384 current steps (14 bits, only for MT6372) in exponential or linear
+  mapping curves.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt6370-backlight
+      - mediatek,mt6372-backlight
+
+  default-brightness:
+    minimum: 0
+
+  max-brightness:
+    minimum: 0
+
+  enable-gpios:
+    description: External backlight 'enable' pin
+    maxItems: 1
+
+  mediatek,bled-pwm-enable:
+    description: |
+      Enable external PWM input for backlight dimming
+    type: boolean
+
+  mediatek,bled-pwm-hys-enable:
+    description: |
+      Enable the backlight input-hysteresis for PWM mode
+    type: boolean
+
+  mediatek,bled-pwm-hys-input-th-steps:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [1, 4, 16, 64]
+    description: |
+      The selection of the upper and lower bounds threshold of backlight
+      PWM resolution. If we choose selection 64, the variation of PWM
+      resolution needs more than 64 steps.
+
+  mediatek,bled-ovp-shutdown:
+    description: |
+      Enable the backlight shutdown when OVP level triggered
+    type: boolean
+
+  mediatek,bled-ovp-microvolt:
+    enum: [17000000, 21000000, 25000000, 29000000]
+    description: |
+      Backlight OVP level selection.
+
+  mediatek,bled-ocp-shutdown:
+    description: |
+      Enable the backlight shutdown when OCP level triggerred.
+    type: boolean
+
+  mediatek,bled-ocp-microamp:
+    enum: [900000, 1200000, 1500000, 1800000]
+    description: |
+      Backlight OC level selection.
+
+  mediatek,bled-exponential-mode-enable:
+    description: |
+      Enable the exponential mode of backlight brightness. If this property
+      is not enabled, the default is to use linear mode.
+    type: boolean
+
+  mediatek,bled-channel-use:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: |
+      Backlight LED channel to be used.
+      Each bit mapping to:
+        - 0: CH4
+        - 1: CH3
+        - 2: CH2
+        - 3: CH1
+    minimum: 1
+    maximum: 15
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: mediatek,mt6372-backlight
+
+then:
+  properties:
+    default-brightness:
+      maximum: 16384
+
+    max-brightness:
+      maximum: 16384
+
+else:
+  properties:
+    default-brightness:
+      maximum: 2048
+
+    max-brightness:
+      maximum: 2048
+
+required:
+  - compatible
+  - mediatek,bled-channel-use
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
index fcb8429f3088..5ec47a8c6568 100644
--- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/leds/backlight/pwm-backlight.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: pwm-backlight bindings
+title: pwm-backlight
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
   - Daniel Thompson <daniel.thompson@linaro.org>
   - Jingoo Han <jingoohan1@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
index d839e75d9788..5f1849bdabba 100644
--- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Binding for Qualcomm Technologies, Inc. WLED driver
+title: Qualcomm Technologies, Inc. WLED driver
 
 maintainers:
   - Bjorn Andersson <bjorn.andersson@linaro.org>
@@ -19,13 +19,16 @@ properties:
   compatible:
     enum:
       - qcom,pm8941-wled
+      - qcom,pmi8950-wled
       - qcom,pmi8994-wled
       - qcom,pmi8998-wled
       - qcom,pm660l-wled
+      - qcom,pm6150l-wled
       - qcom,pm8150l-wled
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   default-brightness:
     description: |
@@ -80,7 +83,7 @@ properties:
     description: |
       kHz; switching frequency.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920, 
+    enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
             2400, 3200, 4800, 9600 ]
 
   qcom,ovp:
@@ -170,6 +173,9 @@ allOf:
 
     then:
       properties:
+        reg:
+          maxItems: 1
+
         qcom,current-boost-limit:
           enum: [ 105, 385, 525, 805, 980, 1260, 1400, 1680 ]
           default: 805
@@ -188,6 +194,9 @@ allOf:
 
     else:
       properties:
+        reg:
+          minItems: 2
+
         qcom,current-boost-limit:
           enum: [ 105, 280, 450, 620, 970, 1150, 1300, 1500 ]
           default: 970
diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
index e0ac68694b63..99e9e138fa92 100644
--- a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
@@ -47,6 +47,11 @@ properties:
     minimum: 0
     maximum: 3
 
+  richtek,bled-ocp-microamp:
+    description: |
+      Backlight over current protection level.
+    enum: [900000, 1200000, 1500000, 1800000]
+
   richtek,channel-use:
     description: |
       Backlight LED channel to be used.
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 697102707703..11aedf1650a1 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -79,24 +79,62 @@ properties:
       the LED.
     $ref: /schemas/types.yaml#/definitions/string
 
-    enum:
-        # LED will act as a back-light, controlled by the framebuffer system
-      - backlight
-        # LED will turn on (but for leds-gpio see "default-state" property in
-        # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
-      - default-on
-        # LED "double" flashes at a load average based rate
-      - heartbeat
-        # LED indicates disk activity
-      - disk-activity
-        # LED indicates IDE disk activity (deprecated), in new implementations
-        # use "disk-activity"
-      - ide-disk
-        # LED flashes at a fixed, configurable rate
-      - timer
-        # LED alters the brightness for the specified duration with one software
-        # timer (requires "led-pattern" property)
-      - pattern
+    oneOf:
+      - enum:
+            # LED will act as a back-light, controlled by the framebuffer system
+          - backlight
+            # LED will turn on (but for leds-gpio see "default-state" property in
+            # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
+          - default-on
+            # LED "double" flashes at a load average based rate
+          - heartbeat
+            # LED indicates disk activity
+          - disk-activity
+            # LED indicates disk read activity
+          - disk-read
+            # LED indicates disk write activity
+          - disk-write
+            # LED flashes at a fixed, configurable rate
+          - timer
+            # LED alters the brightness for the specified duration with one software
+            # timer (requires "led-pattern" property)
+          - pattern
+            # LED indicates mic mute state
+          - audio-micmute
+            # LED indicates audio mute state
+          - audio-mute
+            # LED indicates bluetooth power state
+          - bluetooth-power
+            # LED indicates activity of all CPUs
+          - cpu
+            # LED indicates camera flash state
+          - flash
+            # LED indicated keyboard capslock
+          - kbd-capslock
+            # LED indicates MTD memory activity
+          - mtd
+            # LED indicates NAND memory activity (deprecated),
+            # in new implementations use "mtd"
+          - nand-disk
+            # No trigger assigned to the LED. This is the default mode
+            # if trigger is absent
+          - none
+            # LED indicates camera torch state
+          - torch
+            # LED indicates USB gadget activity
+          - usb-gadget
+            # LED indicates USB host activity
+          - usb-host
+            # LED indicates USB port state
+          - usbport
+        # LED is triggered by CPU activity
+      - pattern: "^cpu[0-9]*$"
+        # LED is triggered by Bluetooth activity
+      - pattern: "^hci[0-9]+-power$"
+        # LED is triggered by SD/MMC activity
+      - pattern: "^mmc[0-9]+$"
+        # LED is triggered by WLAN activity
+      - pattern: "^phy[0-9]+tx$"
 
   led-pattern:
     description: |
@@ -185,9 +223,11 @@ examples:
         };
     };
 
-    led-controller@0 {
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
         compatible = "maxim,max77693-led";
-        reg = <0 0x100>;
 
         led {
             function = LED_FUNCTION_FLASH;
@@ -199,6 +239,9 @@ examples:
         };
     };
 
+  - |
+    #include <dt-bindings/leds/common.h>
+
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
index c7ed2871da06..34ef5215c150 100644
--- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
@@ -32,8 +32,9 @@ properties:
 patternProperties:
   "^multi-led@[0-9a-b]$":
     type: object
-    allOf:
-      - $ref: leds-class-multicolor.yaml#
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
     description:
       This node represents one of the RGB LED devices on Turris Omnia.
       No subnodes need to be added for subchannels since this controller only
@@ -57,7 +58,7 @@ examples:
 
     #include <dt-bindings/leds/common.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt
deleted file mode 100644
index cbe8dfd29715..000000000000
--- a/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-Device tree bindings for IR LED connected through gpio pin which is used as
-remote controller transmitter.
-
-Required properties:
-	- compatible: should be "gpio-ir-tx".
-	- gpios :  Should specify the IR LED GPIO, see "gpios property" in
-	  Documentation/devicetree/bindings/gpio/gpio.txt.  Active low LEDs
-	  should be indicated using flags in the GPIO specifier.
-
-Example:
-	irled@0 {
-		compatible = "gpio-ir-tx";
-		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.yaml b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.yaml
new file mode 100644
index 000000000000..5839d00c7089
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/irled/gpio-ir-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR LED connected through GPIO pin
+
+maintainers:
+  - Sean Young <sean@mess.org>
+
+description:
+  IR LED connected through GPIO pin which is used as remote controller
+  transmitter.
+
+properties:
+  compatible:
+    const: gpio-ir-tx
+
+  gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    irled {
+        compatible = "gpio-ir-tx";
+        gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml b/Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml
new file mode 100644
index 000000000000..72cadebf6e3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/ir-spi-led.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/irled/ir-spi-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR LED connected through SPI bus
+
+maintainers:
+  - Sean Young <sean@mess.org>
+
+description:
+  IR LED switch is connected to the MOSI line of the SPI device and the data
+  is delivered through that.
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: ir-spi-led
+
+  reg:
+    maxItems: 1
+
+  duty-cycle:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [50, 60, 70, 75, 80, 90]
+    description:
+      Percentage of one period in which the signal is active.
+
+  led-active-low:
+    type: boolean
+    description:
+      Output is negated with a NOT gate.
+
+  power-supply: true
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        irled@0 {
+            compatible = "ir-spi-led";
+            reg = <0x0>;
+
+            duty-cycle = /bits/ 8 <60>;
+            led-active-low;
+            power-supply = <&irda_regulator>;
+            spi-max-frequency = <5000000>;
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt
deleted file mode 100644
index 66e5672c2e3d..000000000000
--- a/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-Device tree bindings for IR LED connected through pwm pin which is used as
-remote controller transmitter.
-
-Required properties:
-	- compatible: should be "pwm-ir-tx".
-	- pwms : PWM property to point to the PWM device (phandle)/port (id)
-	  and to specify the period time to be used: <&phandle id period_ns>;
-
-Example:
-	irled {
-		compatible = "pwm-ir-tx";
-		pwms = <&pwm0 0 10000000>;
-	};
diff --git a/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.yaml b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.yaml
new file mode 100644
index 000000000000..f2a6fa140f38
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/irled/pwm-ir-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IR LED connected through PWM pin
+
+maintainers:
+  - Sean Young <sean@mess.org>
+
+description:
+  IR LED connected through PWM pin which is used as remote controller
+  transmitter.
+
+properties:
+  compatible:
+    const: pwm-ir-tx
+
+  pwms:
+    maxItems: 1
+
+required:
+  - compatible
+  - pwms
+
+additionalProperties: false
+
+examples:
+  - |
+    irled {
+        compatible = "pwm-ir-tx";
+        pwms = <&pwm0 0 10000000>;
+    };
diff --git a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
deleted file mode 100644
index 83ff1b4d70a6..000000000000
--- a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Device tree bindings for IR LED connected through SPI bus which is used as
-remote controller.
-
-The IR LED switch is connected to the MOSI line of the SPI device and the data
-are delivered thourgh that.
-
-Required properties:
-	- compatible: should be "ir-spi-led".
-
-Optional properties:
-	- duty-cycle: 8 bit value that represents the percentage of one period
-	  in which the signal is active.  It can be 50, 60, 70, 75, 80 or 90.
-	- led-active-low: boolean value that specifies whether the output is
-	  negated with a NOT gate.
-	- power-supply: specifies the power source. It can either be a regulator
-	  or a gpio which enables a regulator, i.e. a regulator-fixed as
-	  described in
-	  Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
-
-Example:
-
-	irled@0 {
-		compatible = "ir-spi-led";
-		reg = <0x0>;
-		spi-max-frequency = <5000000>;
-		power-supply = <&vdd_led>;
-		led-active-low;
-		duty-cycle = /bits/ 8 <60>;
-	};
diff --git a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
new file mode 100644
index 000000000000..3c0431c51159
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/issi,is31fl319x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ISSI LED Controllers for IS31FL319{0,1,3,6,9}
+
+maintainers:
+  - Vincent Knecht <vincent.knecht@mailoo.org>
+
+description: |
+  The IS31FL319X are LED controllers with I2C interface.
+  Previously known as Si-En SN319{0,1,3,6,9}.
+
+  For more product information please see the links below:
+    https://lumissil.com/assets/pdf/core/IS31FL3190_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3191_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3193_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3196_DS.pdf
+    https://lumissil.com/assets/pdf/core/IS31FL3199_DS.pdf
+
+properties:
+  compatible:
+    enum:
+      - issi,is31fl3190
+      - issi,is31fl3191
+      - issi,is31fl3193
+      - issi,is31fl3196
+      - issi,is31fl3199
+      - si-en,sn3190
+      - si-en,sn3191
+      - si-en,sn3193
+      - si-en,sn3196
+      - si-en,sn3199
+
+  reg:
+    maxItems: 1
+
+  shutdown-gpios:
+    maxItems: 1
+    description: GPIO attached to the SDB pin.
+
+  audio-gain-db:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+    description: Audio gain selection for external analog modulation input.
+    enum: [0, 3, 6, 9, 12, 15, 18, 21]
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[1-9]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: Index of the LED.
+        minimum: 1
+        maximum: 9
+
+      led-max-microamp:
+        description:
+          Note that a driver will take the lowest of all LED limits
+          since the chip has a single global setting. The lowest value
+          will be chosen due to the PWM specificity, where lower
+          brightness is achieved by reducing the duty-cycle of pulses
+          and not the current, which will always have its peak value
+          equal to led-max-microamp.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3190
+              - issi,is31fl3191
+              - issi,is31fl3193
+              - si-en,sn3190
+              - si-en,sn3191
+              - si-en,sn3193
+    then:
+      properties:
+        reg:
+          enum: [0x68, 0x69, 0x6a, 0x6b]
+
+        audio-gain-db: false
+
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            led-max-microamp:
+              default: 42000
+              enum: [5000, 10000, 17500, 30000, 42000]
+    else:
+      properties:
+        reg:
+          enum: [0x64, 0x65, 0x66, 0x67]
+
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            led-max-microamp:
+              default: 20000
+              enum: [5000, 10000, 15000, 20000, 25000, 30000, 35000, 40000]
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3190
+              - issi,is31fl3191
+              - si-en,sn3190
+              - si-en,sn3191
+    then:
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            reg:
+              maximum: 1
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3193
+              - si-en,sn3193
+    then:
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            reg:
+              maximum: 3
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3196
+              - si-en,sn3196
+    then:
+      patternProperties:
+        "^led@[1-9]$":
+          properties:
+            reg:
+              maximum: 6
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@65 {
+            compatible = "issi,is31fl3196";
+            reg = <0x65>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+
+            led@1 {
+                reg = <1>;
+                label = "red:aux";
+                led-max-microamp = <10000>;
+            };
+
+            led@5 {
+                reg = <5>;
+                label = "green:power";
+                linux,default-trigger = "default-on";
+            };
+        };
+    };
+...
+
diff --git a/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
new file mode 100644
index 000000000000..bac95a51afa1
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/kinetic,ktd2692.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: KTD2692 Flash LED Driver from Kinetic Technologies
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+description: |
+  KTD2692 is the ideal power solution for high-power flash LEDs.
+  It uses ExpressWire single-wire programming for maximum flexibility.
+
+  The ExpressWire interface through CTRL pin can control LED on/off and
+  enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
+  Flash timeout, LVP(low voltage protection).
+
+  Also, When the AUX pin is pulled high while CTRL pin is high,
+  LED current will be ramped up to the flash-mode current level.
+
+properties:
+  compatible:
+    const: kinetic,ktd2692
+
+  ctrl-gpios:
+    maxItems: 1
+    description: Specifier of the GPIO connected to CTRL pin.
+
+  aux-gpios:
+    maxItems: 1
+    description: Specifier of the GPIO connected to CTRL pin.
+
+  vin-supply:
+    description: LED supply (2.7V to 5.5V).
+
+  led:
+    type: object
+    $ref: common.yaml#
+    description: Properties for the LED.
+    properties:
+      function: true
+      color: true
+      flash-max-timeout-us:
+        description: Flash LED maximum timeout.
+
+      led-max-microamp:
+        maximum: 300000
+        description: Minimum Threshold for Timer protection
+          is defined internally (Maximum 300mA).
+
+      flash-max-microamp:
+        maximum: 300000
+        description: Flash LED maximum current
+          Formula - I(uA) = 15000000 / Rset.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - ctrl-gpios
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    ktd2692 {
+      compatible = "kinetic,ktd2692";
+      ctrl-gpios = <&gpc0 1 0>;
+      aux-gpios = <&gpc0 2 0>;
+      vin-supply = <&vbat>;
+
+      led {
+        function = LED_FUNCTION_FLASH;
+        color = <LED_COLOR_ID_WHITE>;
+        flash-max-timeout-us = <250000>;
+        flash-max-microamp = <150000>;
+        led-max-microamp = <25000>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-aat1290.txt b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
deleted file mode 100644
index 62ed17ec075b..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-aat1290.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
-
-The device is controlled through two pins: FL_EN and EN_SET. The pins when,
-asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
-respectively. In order to add a capability of selecting the strobe signal source
-(e.g. CPU or camera sensor) there is an additional switch required, independent
-of the flash chip. The switch is controlled with pin control.
-
-Required properties:
-
-- compatible : Must be "skyworks,aat1290".
-- flen-gpios : Must be device tree identifier of the flash device FL_EN pin.
-- enset-gpios : Must be device tree identifier of the flash device EN_SET pin.
-
-Optional properties:
-- pinctrl-names : Must contain entries: "default", "host", "isp". Entries
-		"default" and "host" must refer to the same pin configuration
-		node, which sets the host as a strobe signal provider. Entry
-		"isp" must refer to the pin configuration node, which sets the
-		ISP as a strobe signal provider.
-
-A discrete LED element connected to the device must be represented by a child
-node - see Documentation/devicetree/bindings/leds/common.txt.
-
-Required properties of the LED child node:
-- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-                       Maximum flash LED supply current can be calculated using
-                       following formula: I = 1A * 162kohm / Rset.
-- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
-                         Maximum flash timeout can be calculated using following
-                         formula: T = 8.82 * 10^9 * Ct.
-
-Optional properties of the LED child node:
-- function : see Documentation/devicetree/bindings/leds/common.txt
-- color : see Documentation/devicetree/bindings/leds/common.txt
-- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
-
-Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with
-a switch that allows for routing strobe signal either from the host or from
-the camera sensor):
-
-#include "exynos4412.dtsi"
-#include <dt-bindings/leds/common.h>
-
-led-controller {
-	compatible = "skyworks,aat1290";
-	flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
-	enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
-
-	pinctrl-names = "default", "host", "isp";
-	pinctrl-0 = <&camera_flash_host>;
-	pinctrl-1 = <&camera_flash_host>;
-	pinctrl-2 = <&camera_flash_isp>;
-
-	camera_flash: led {
-		function = LED_FUNCTION_FLASH;
-		color = <LED_COLOR_ID_WHITE>;
-		led-max-microamp = <520833>;
-		flash-max-microamp = <1012500>;
-		flash-max-timeout-us = <1940000>;
-	};
-};
-
-&pinctrl_0 {
-	camera_flash_host: camera-flash-host {
-		samsung,pins = "gpj1-0";
-		samsung,pin-function = <1>;
-		samsung,pin-val = <0>;
-	};
-
-	camera_flash_isp: camera-flash-isp {
-		samsung,pins = "gpj1-0";
-		samsung,pin-function = <1>;
-		samsung,pin-val = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
index e24b0d15ef01..08f3e1cfc1b1 100644
--- a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
@@ -33,6 +33,7 @@ patternProperties:
   "^led@[0-2]$":
     type: object
     $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       reg:
@@ -53,7 +54,7 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/leds/common.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
new file mode 100644
index 000000000000..52252fb6bb32
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-bcm63138.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's BCM63138 LEDs controller
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  This LEDs controller was first used on BCM63138 and later reused on BCM4908,
+  BCM6848, BCM6858, BCM63138, BCM63148, BCM63381 and BCM68360 SoCs.
+
+  It supports up to 32 LEDs that can be connected parallelly or serially. It
+  also includes limited support for hardware blinking.
+
+  Binding serially connected LEDs isn't documented yet.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm4908-leds
+              - brcm,bcm6848-leds
+              - brcm,bcm6858-leds
+              - brcm,bcm63148-leds
+              - brcm,bcm63381-leds
+              - brcm,bcm68360-leds
+          - const: brcm,bcm63138-leds
+      - const: brcm,bcm63138-leds
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[a-f0-9]+$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        maxItems: 1
+        description: LED pin number
+
+      active-low:
+        type: boolean
+        description: Makes LED active low
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    leds@ff800800 {
+        compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
+        reg = <0xff800800 0xdc>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@0 {
+            reg = <0x0>;
+            function = LED_FUNCTION_POWER;
+            color = <LED_COLOR_ID_GREEN>;
+            default-state = "on";
+        };
+
+        led@3 {
+            reg = <0x3>;
+            function = LED_FUNCTION_STATUS;
+            color = <LED_COLOR_ID_GREEN>;
+            active-low;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
deleted file mode 100644
index a555d94084b7..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
+++ /dev/null
@@ -1,319 +0,0 @@
-LEDs connected to Broadcom BCM6328 controller
-
-This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
-In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
-However, on some devices there are Serial LEDs (LEDs connected to a 74x164
-controller), which can either be controlled by software (exporting the 74x164
-as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml),
-or by hardware using this driver.
-Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
-exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
-controlled, so the only chance to keep them working is by using this driver.
-
-BCM6328 LED controller has a HWDIS register, which controls whether a LED
-should be controlled by a hardware signal instead of the MODE register value,
-with 0 meaning hardware control enabled and 1 hardware control disabled. This
-is usually 1:1 for hardware to LED signals, but through the activity/link
-registers you have some limited control over rerouting the LEDs (as
-explained later in brcm,link-signal-sources). Even if a LED is hardware
-controlled you are still able to make it blink or light it up if it isn't,
-but you can't turn it off if the hardware decides to light it up. For this
-reason, hardware controlled LEDs aren't registered as LED class devices.
-
-Required properties:
-  - compatible : should be "brcm,bcm6328-leds".
-  - #address-cells : must be 1.
-  - #size-cells : must be 0.
-  - reg : BCM6328 LED controller address and size.
-
-Optional properties:
-  - brcm,serial-leds : Boolean, enables Serial LEDs.
-    Default : false
-  - brcm,serial-mux : Boolean, enables Serial LEDs multiplexing.
-    Default : false
-  - brcm,serial-clk-low : Boolean, makes clock signal active low.
-    Default : false
-  - brcm,serial-dat-low : Boolean, makes data signal active low.
-    Default : false
-  - brcm,serial-shift-inv : Boolean, inverts Serial LEDs shift direction.
-    Default : false
-
-Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
-
-LED sub-node required properties:
-  - reg : LED pin number (only LEDs 0 to 23 are valid).
-
-LED sub-node optional properties:
-  a) Optional properties for sub-nodes related to software controlled LEDs:
-    - label : see Documentation/devicetree/bindings/leds/common.txt
-    - active-low : Boolean, makes LED active low.
-      Default : false
-    - default-state : see
-      Documentation/devicetree/bindings/leds/common.txt
-    - linux,default-trigger : see
-      Documentation/devicetree/bindings/leds/common.txt
-
-  b) Optional properties for sub-nodes related to hardware controlled LEDs:
-    - brcm,hardware-controlled : Boolean, makes this LED hardware controlled.
-      Default : false
-    - brcm,link-signal-sources : An array of hardware link
-      signal sources. Up to four link hardware signals can get muxed into
-      these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
-      be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
-      4 to 7. A signal can be muxed to more than one LED, and one LED can
-      have more than one source signal.
-    - brcm,activity-signal-sources : An array of hardware activity
-      signal sources. Up to four activity hardware signals can get muxed into
-      these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
-      be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
-      4 to 7. A signal can be muxed to more than one LED, and one LED can
-      have more than one source signal.
-
-Examples:
-Scenario 1 : BCM6328 with 4 EPHY LEDs
-	leds0: led-controller@10000800 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10000800 0x24>;
-
-		alarm_red@2 {
-			reg = <2>;
-			active-low;
-			label = "red:alarm";
-		};
-		inet_green@3 {
-			reg = <3>;
-			active-low;
-			label = "green:inet";
-		};
-		power_green@4 {
-			reg = <4>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-		ephy0_spd@17 {
-			reg = <17>;
-			brcm,hardware-controlled;
-		};
-		ephy1_spd@18 {
-			reg = <18>;
-			brcm,hardware-controlled;
-		};
-		ephy2_spd@19 {
-			reg = <19>;
-			brcm,hardware-controlled;
-		};
-		ephy3_spd@20 {
-			reg = <20>;
-			brcm,hardware-controlled;
-		};
-	};
-
-Scenario 2 : BCM63268 with Serial/GPHY0 LEDs
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-		brcm,serial-leds;
-		brcm,serial-dat-low;
-		brcm,serial-shift-inv;
-
-		gphy0_spd0@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0>;
-		};
-		gphy0_spd1@1 {
-			reg = <1>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <1>;
-		};
-		inet_red@2 {
-			reg = <2>;
-			active-low;
-			label = "red:inet";
-		};
-		dsl_green@3 {
-			reg = <3>;
-			active-low;
-			label = "green:dsl";
-		};
-		usb_green@4 {
-			reg = <4>;
-			active-low;
-			label = "green:usb";
-		};
-		wps_green@7 {
-			reg = <7>;
-			active-low;
-			label = "green:wps";
-		};
-		inet_green@8 {
-			reg = <8>;
-			active-low;
-			label = "green:inet";
-		};
-		ephy0_act@9 {
-			reg = <9>;
-			brcm,hardware-controlled;
-		};
-		ephy1_act@10 {
-			reg = <10>;
-			brcm,hardware-controlled;
-		};
-		ephy2_act@11 {
-			reg = <11>;
-			brcm,hardware-controlled;
-		};
-		gphy0_act@12 {
-			reg = <12>;
-			brcm,hardware-controlled;
-		};
-		ephy0_spd@13 {
-			reg = <13>;
-			brcm,hardware-controlled;
-		};
-		ephy1_spd@14 {
-			reg = <14>;
-			brcm,hardware-controlled;
-		};
-		ephy2_spd@15 {
-			reg = <15>;
-			brcm,hardware-controlled;
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
-
-Scenario 3 : BCM6362 with 1 LED for each EPHY
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-
-		usb@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0>;
-			brcm,activity-signal-sources = <0>;
-			/* USB link/activity routed to USB LED */
-		};
-		inet@1 {
-			reg = <1>;
-			brcm,hardware-controlled;
-			brcm,activity-signal-sources = <1>;
-			/* INET activity routed to INET LED */
-		};
-		ephy0@4 {
-			reg = <4>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <4>;
-			/* EPHY0 link routed to EPHY0 LED */
-		};
-		ephy1@5 {
-			reg = <5>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <5>;
-			/* EPHY1 link routed to EPHY1 LED */
-		};
-		ephy2@6 {
-			reg = <6>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <6>;
-			/* EPHY2 link routed to EPHY2 LED */
-		};
-		ephy3@7 {
-			reg = <7>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <7>;
-			/* EPHY3 link routed to EPHY3 LED */
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
-
-Scenario 4 : BCM6362 with 1 LED for all EPHYs
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-
-		usb@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0 1>;
-			brcm,activity-signal-sources = <0 1>;
-			/* USB/INET link/activity routed to USB LED */
-		};
-		ephy@4 {
-			reg = <4>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <4 5 6 7>;
-			/* EPHY0/1/2/3 link routed to EPHY0 LED */
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
-
-Scenario 5 : BCM6362 with EPHY LEDs swapped
-	leds0: led-controller@10001900 {
-		compatible = "brcm,bcm6328-leds";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x10001900 0x24>;
-
-		usb@0 {
-			reg = <0>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <0>;
-			brcm,activity-signal-sources = <0 1>;
-			/* USB link/act and INET act routed to USB LED */
-		};
-		ephy0@4 {
-			reg = <4>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <7>;
-			/* EPHY3 link routed to EPHY0 LED */
-		};
-		ephy1@5 {
-			reg = <5>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <6>;
-			/* EPHY2 link routed to EPHY1 LED */
-		};
-		ephy2@6 {
-			reg = <6>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <5>;
-			/* EPHY1 link routed to EPHY2 LED */
-		};
-		ephy3@7 {
-			reg = <7>;
-			brcm,hardware-controlled;
-			brcm,link-signal-sources = <4>;
-			/* EPHY0 link routed to EPHY3 LED */
-		};
-		power_green@20 {
-			reg = <20>;
-			active-low;
-			label = "green:power";
-			default-state = "on";
-		};
-	};
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
new file mode 100644
index 000000000000..51cc0d82c12e
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.yaml
@@ -0,0 +1,404 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-bcm6328.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to Broadcom BCM6328 controller
+
+maintainers:
+  - Álvaro Fernández Rojas <noltari@gmail.com>
+
+description: |
+  This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
+  In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
+  However, on some devices there are Serial LEDs (LEDs connected to a 74x164
+  controller), which can either be controlled by software (exporting the 74x164
+  as spi-gpio. See
+  Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or by hardware
+  using this driver.
+  Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
+  exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
+  controlled, so the only chance to keep them working is by using this driver.
+
+  BCM6328 LED controller has a HWDIS register, which controls whether a LED
+  should be controlled by a hardware signal instead of the MODE register value,
+  with 0 meaning hardware control enabled and 1 hardware control disabled. This
+  is usually 1:1 for hardware to LED signals, but through the activity/link
+  registers you have some limited control over rerouting the LEDs (as
+  explained later in brcm,link-signal-sources). Even if a LED is hardware
+  controlled you are still able to make it blink or light it up if it isn't,
+  but you can't turn it off if the hardware decides to light it up. For this
+  reason, hardware controlled LEDs aren't registered as LED class devices.
+
+  Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
+
+properties:
+  compatible:
+    const: brcm,bcm6328-leds
+
+  reg:
+    maxItems: 1
+
+  brcm,serial-leds:
+    type: boolean
+    description: Enables Serial LEDs.
+
+  brcm,serial-mux:
+    type: boolean
+    description: Enables Serial LEDs multiplexing.
+
+  brcm,serial-clk-low:
+    type: boolean
+    description: Makes clock signal active low.
+
+  brcm,serial-dat-low:
+    type: boolean
+    description: Makes data signal active low.
+
+  brcm,serial-shift-inv:
+    type: boolean
+    description: Inverts Serial LEDs shift direction.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "@[a-f0-9]+$":
+    type: object
+
+    $ref: common.yaml#
+
+    properties:
+      reg:
+        items:
+          - maximum: 23
+        description: LED pin number (only LEDs 0 to 23 are valid).
+
+      active-low:
+        type: boolean
+        description: Makes LED active low.
+
+      brcm,hardware-controlled:
+        type: boolean
+        description: Makes this LED hardware controlled.
+
+      brcm,link-signal-sources:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        description: >
+          An array of hardware link signal sources. Up to four link hardware
+          signals can get muxed into these LEDs. Only valid for LEDs 0 to 7,
+          where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and signals 4 to
+          7 may be muxed to LEDs 4 to 7. A signal can be muxed to more than one
+          LED, and one LED can have more than one source signal.
+
+      brcm,activity-signal-sources:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 4
+        description: >
+          An array of hardware activity signal sources. Up to four activity
+          hardware signals can get muxed into these LEDs. Only valid for LEDs 0
+          to 7, where LED signals 0 to 3 may be muxed to LEDs 0 to 3, and
+          signals 4 to 7 may be muxed to LEDs 4 to 7. A signal can be muxed to
+          more than one LED, and one LED can have more than one source signal.
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    /* BCM6328 with 4 EPHY LEDs */
+    led-controller@10000800 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10000800 0x24>;
+
+        alarm_red@2 {
+            reg = <2>;
+            active-low;
+            label = "red:alarm";
+        };
+
+        inet_green@3 {
+            reg = <3>;
+            active-low;
+            label = "green:inet";
+        };
+
+        power_green@4 {
+            reg = <4>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+
+        ephy0_spd@17 {
+            reg = <17>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_spd@18 {
+            reg = <18>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_spd@19 {
+            reg = <19>;
+            brcm,hardware-controlled;
+        };
+
+        ephy3_spd@20 {
+            reg = <20>;
+            brcm,hardware-controlled;
+        };
+    };
+  - |
+    /* BCM63268 with Serial/GPHY0 LEDs */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+        brcm,serial-leds;
+        brcm,serial-dat-low;
+        brcm,serial-shift-inv;
+
+        gphy0_spd0@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+        };
+
+        gphy0_spd1@1 {
+            reg = <1>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <1>;
+        };
+
+        inet_red@2 {
+            reg = <2>;
+            active-low;
+            label = "red:inet";
+        };
+
+        dsl_green@3 {
+            reg = <3>;
+            active-low;
+            label = "green:dsl";
+        };
+
+        usb_green@4 {
+            reg = <4>;
+            active-low;
+            label = "green:usb";
+        };
+
+        wps_green@7 {
+            reg = <7>;
+            active-low;
+            label = "green:wps";
+        };
+
+        inet_green@8 {
+            reg = <8>;
+            active-low;
+            label = "green:inet";
+        };
+
+        ephy0_act@9 {
+            reg = <9>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_act@10 {
+            reg = <10>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_act@11 {
+            reg = <11>;
+            brcm,hardware-controlled;
+        };
+
+        gphy0_act@12 {
+            reg = <12>;
+            brcm,hardware-controlled;
+        };
+
+        ephy0_spd@13 {
+            reg = <13>;
+            brcm,hardware-controlled;
+        };
+
+        ephy1_spd@14 {
+            reg = <14>;
+            brcm,hardware-controlled;
+        };
+
+        ephy2_spd@15 {
+            reg = <15>;
+            brcm,hardware-controlled;
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with 1 LED for each EPHY */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+            brcm,activity-signal-sources = <0>;
+            /* USB link/activity routed to USB LED */
+        };
+
+        inet@1 {
+            reg = <1>;
+            brcm,hardware-controlled;
+            brcm,activity-signal-sources = <1>;
+            /* INET activity routed to INET LED */
+        };
+
+        ephy0@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4>;
+            /* EPHY0 link routed to EPHY0 LED */
+        };
+
+        ephy1@5 {
+            reg = <5>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <5>;
+            /* EPHY1 link routed to EPHY1 LED */
+        };
+
+        ephy2@6 {
+            reg = <6>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <6>;
+            /* EPHY2 link routed to EPHY2 LED */
+        };
+
+        ephy3@7 {
+            reg = <7>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <7>;
+            /* EPHY3 link routed to EPHY3 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with 1 LED for all EPHYs */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0 1>;
+            brcm,activity-signal-sources = <0 1>;
+            /* USB/INET link/activity routed to USB LED */
+        };
+
+        ephy@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4 5 6 7>;
+            /* EPHY0/1/2/3 link routed to EPHY0 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
+  - |
+    /* BCM6362 with EPHY LEDs swapped */
+    led-controller@10001900 {
+        compatible = "brcm,bcm6328-leds";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x10001900 0x24>;
+
+        usb@0 {
+            reg = <0>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <0>;
+            brcm,activity-signal-sources = <0 1>;
+            /* USB link/act and INET act routed to USB LED */
+        };
+
+        ephy0@4 {
+            reg = <4>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <7>;
+            /* EPHY3 link routed to EPHY0 LED */
+        };
+
+        ephy1@5 {
+            reg = <5>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <6>;
+            /* EPHY2 link routed to EPHY1 LED */
+        };
+
+        ephy2@6 {
+            reg = <6>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <5>;
+            /* EPHY1 link routed to EPHY2 LED */
+        };
+
+        ephy3@7 {
+            reg = <7>;
+            brcm,hardware-controlled;
+            brcm,link-signal-sources = <4>;
+            /* EPHY0 link routed to EPHY3 LED */
+        };
+
+        power_green@20 {
+            reg = <20>;
+            active-low;
+            label = "green:power";
+            default-state = "on";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
index 37445c68cdef..31840e33dcf5 100644
--- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Common properties for the multicolor LED class.
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   Bindings for multi color LEDs show how to describe current outputs of
@@ -19,22 +19,22 @@ description: |
   LED class.  Common LED nodes and properties are inherited from the common.yaml
   within this documentation directory.
 
-patternProperties:
-  "^multi-led@([0-9a-f])$":
-    type: object
-    description: Represents the LEDs that are to be grouped.
-    properties:
-      color:
-        description: |
-          For multicolor LED support this property should be defined as either
-          LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
-          include/linux/leds/common.h.
-        enum: [ 8, 9 ]
-
-    $ref: "common.yaml#"
-
-    required:
-      - color
+properties:
+  $nodename:
+    pattern: "^multi-led(@[0-9a-f])?$"
+
+  color:
+    description: |
+      For multicolor LED support this property should be defined as either
+      LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
+      include/linux/leds/common.h.
+    enum: [ 8, 9 ]
+
+required:
+  - color
+
+allOf:
+  - $ref: "common.yaml#"
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
index 7ad2baeda0b0..7e11703acbd6 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
@@ -23,8 +23,8 @@ patternProperties:
   # node name to at least catch some child nodes.
   "(^led-[0-9a-f]$|led)":
     type: object
-
     $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       gpios:
diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt b/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
deleted file mode 100644
index 676d43ec8169..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-LEDs connected to is31fl319x LED controller chip
-
-Required properties:
-- compatible : Should be any of
-	"issi,is31fl3190"
-	"issi,is31fl3191"
-	"issi,is31fl3193"
-	"issi,is31fl3196"
-	"issi,is31fl3199"
-	"si-en,sn3199".
-- #address-cells: Must be 1.
-- #size-cells: Must be 0.
-- reg: 0x64, 0x65, 0x66, or 0x67.
-
-Optional properties:
-- audio-gain-db : audio gain selection for external analog modulation input.
-	Valid values: 0 - 21, step by 3 (rounded down)
-	Default: 0
-- shutdown-gpios : Specifier of the GPIO connected to SDB pin of the chip.
-
-Each led is represented as a sub-node of the issi,is31fl319x device.
-There can be less leds subnodes than the chip can support but not more.
-
-Required led sub-node properties:
-- reg : number of LED line
-	Valid values: 1 - number of leds supported by the chip variant.
-
-Optional led sub-node properties:
-- label : see Documentation/devicetree/bindings/leds/common.txt.
-- linux,default-trigger :
-	see Documentation/devicetree/bindings/leds/common.txt.
-- led-max-microamp : (optional)
-	Valid values: 5000 - 40000, step by 5000 (rounded down)
-	Default: 20000 (20 mA)
-	Note: a driver will take the lowest of all led limits since the
-	chip has a single global setting. The lowest value will be chosen
-	due to the PWM specificity, where lower brightness is achieved
-	by reducing the dury-cycle of pulses and not the current, which
-	will always have its peak value equal to led-max-microamp.
-
-Examples:
-
-fancy_leds: leds@65 {
-	compatible = "issi,is31fl3196";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	reg = <0x65>;
-	shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-
-	red_aux: led@1 {
-		label = "red:aux";
-		reg = <1>;
-		led-max-microamp = <10000>;
-	};
-
-	green_power: led@5 {
-		label = "green:power";
-		reg = <5>;
-		linux,default-trigger = "default-on";
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
deleted file mode 100644
index 853737452580..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Kinetic Technologies - KTD2692 Flash LED Driver
-
-KTD2692 is the ideal power solution for high-power flash LEDs.
-It uses ExpressWire single-wire programming for maximum flexibility.
-
-The ExpressWire interface through CTRL pin can control LED on/off and
-enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
-Flash timeout, LVP(low voltage protection).
-
-Also, When the AUX pin is pulled high while CTRL pin is high,
-LED current will be ramped up to the flash-mode current level.
-
-Required properties:
-- compatible : Should be "kinetic,ktd2692".
-- ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
-- aux-gpios : Specifier of the GPIO connected to AUX pin.
-
-Optional properties:
-- vin-supply : "vin" LED supply (2.7V to 5.5V).
-  See Documentation/devicetree/bindings/regulator/regulator.txt
-
-A discrete LED element connected to the device must be represented by a child
-node - See Documentation/devicetree/bindings/leds/common.txt
-
-Required properties for flash LED child nodes:
-  See Documentation/devicetree/bindings/leds/common.txt
-- led-max-microamp : Minimum Threshold for Timer protection
-  is defined internally (Maximum 300mA).
-- flash-max-microamp : Flash LED maximum current
-  Formula : I(mA) = 15000 / Rset.
-- flash-max-timeout-us : Flash LED maximum timeout.
-
-Optional properties for flash LED child nodes:
-- label : See Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-ktd2692 {
-	compatible = "kinetic,ktd2692";
-	ctrl-gpios = <&gpc0 1 0>;
-	aux-gpios = <&gpc0 2 0>;
-	vin-supply = <&vbat>;
-
-	flash-led {
-		label = "ktd2692-flash";
-		led-max-microamp = <300000>;
-		flash-max-microamp = <1500000>;
-		flash-max-timeout-us = <1835000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-lgm.yaml b/Documentation/devicetree/bindings/leds/leds-lgm.yaml
index f8d7963c3a13..8b3b3bf1eaf2 100644
--- a/Documentation/devicetree/bindings/leds/leds-lgm.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lgm.yaml
@@ -56,7 +56,8 @@ properties:
 
     patternProperties:
       "^led@[0-2]$":
-        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
 
         properties:
           reg:
@@ -64,6 +65,9 @@ properties:
             minimum: 0
             maximum: 2
 
+          led-gpios:
+            maxItems: 1
+
           intel,sso-hw-trigger:
             type: boolean
             description: This property indicates Hardware driven/control LED.
@@ -118,14 +122,14 @@ examples:
           reg = <0>;
           function = "gphy";
           color = <LED_COLOR_ID_GREEN>;
-          led-gpio = <&ssogpio 0 0>;
+          led-gpios = <&ssogpio 0 0>;
         };
 
         led@2 {
           reg = <2>;
           function = LED_FUNCTION_POWER;
           color = <LED_COLOR_ID_GREEN>;
-          led-gpio = <&ssogpio 23 0>;
+          led-gpios = <&ssogpio 23 0>;
         };
       };
     };
diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
index c192b5feadc7..402c25424525 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: LED driver for LP50XX RGB LED from Texas Instruments.
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   The LP50XX is multi-channel, I2C RGB LED Drivers that can group RGB LEDs into
@@ -55,8 +55,9 @@ properties:
 patternProperties:
   '^multi-led@[0-9a-f]$':
     type: object
-    allOf:
-      - $ref: leds-class-multicolor.yaml#
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
     properties:
       reg:
         minItems: 1
@@ -66,10 +67,24 @@ patternProperties:
           for the child node.  The LED modules can either be used stand alone
           or grouped into a module bank.
 
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
     patternProperties:
-      "(^led-[0-9a-f]$|led)":
+      "^led@[0-9a-f]+$":
         type: object
         $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            maxItems: 1
+
+        required:
+          - reg
 
 required:
   - compatible
@@ -79,60 +94,66 @@ additionalProperties: false
 
 examples:
   - |
-   #include <dt-bindings/gpio/gpio.h>
-   #include <dt-bindings/leds/common.h>
-
-   i2c {
-       #address-cells = <1>;
-       #size-cells = <0>;
-
-       led-controller@14 {
-           compatible = "ti,lp5009";
-           reg = <0x14>;
-           #address-cells = <1>;
-           #size-cells = <0>;
-           enable-gpios = <&gpio1 16>;
-
-           multi-led@1 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0x1>;
-               color = <LED_COLOR_ID_RGB>;
-               function = LED_FUNCTION_CHARGING;
-
-               led-0 {
-                   color = <LED_COLOR_ID_RED>;
-               };
-
-               led-1 {
-                   color = <LED_COLOR_ID_GREEN>;
-               };
-
-               led-2 {
-                   color = <LED_COLOR_ID_BLUE>;
-               };
-          };
-
-          multi-led@2 {
-            #address-cells = <1>;
-            #size-cells = <2>;
-            reg = <0x2 0x3 0x5>;
-            color = <LED_COLOR_ID_RGB>;
-            function = LED_FUNCTION_STANDBY;
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
 
-            led-6 {
-              color = <LED_COLOR_ID_RED>;
-            };
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-            led-7 {
-              color = <LED_COLOR_ID_GREEN>;
+        led-controller@14 {
+            compatible = "ti,lp5009";
+            reg = <0x14>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            enable-gpios = <&gpio1 16>;
+
+            multi-led@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x1>;
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_CHARGING;
+
+                led@0 {
+                     reg = <0x0>;
+                     color = <LED_COLOR_ID_RED>;
+                };
+
+                led@1 {
+                     reg = <0x1>;
+                     color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@2 {
+                     reg = <0x2>;
+                     color = <LED_COLOR_ID_BLUE>;
+                };
             };
 
-            led-8 {
-              color = <LED_COLOR_ID_BLUE>;
+            multi-led@3 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x3>, <0x4>, <0x5>;
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_STANDBY;
+
+                led@3 {
+                    reg = <0x3>;
+                    color = <LED_COLOR_ID_RED>;
+                };
+
+                led@4 {
+                    reg = <0x4>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@5 {
+                    reg = <0x5>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
             };
-         };
-       };
+        };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
index f552cd143d5b..ae607911f1db 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
@@ -43,11 +43,13 @@ properties:
       - 1 # internal
       - 2 # external
 
-  enable-gpio:
+  enable-gpios:
     maxItems: 1
     description: |
       GPIO attached to the chip's enable pin
 
+  label: true
+
   pwr-sel:
     $ref: /schemas/types.yaml#/definitions/uint8
     description: |
@@ -65,9 +67,50 @@ properties:
     const: 0
 
 patternProperties:
-  "(^led@[0-9a-f]$|led)":
+  '^multi-led@[0-8]$':
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maximum: 8
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^led@[0-8]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          led-cur:
+            $ref: /schemas/types.yaml#/definitions/uint8
+            description: |
+              Current setting at each LED channel (mA x10, 0 if LED is not connected)
+            minimum: 0
+            maximum: 255
+
+          max-cur:
+            $ref: /schemas/types.yaml#/definitions/uint8
+            description: Maximun current at each LED channel.
+
+          reg:
+            maximum: 8
+
+        required:
+          - reg
+
+  "^led@[0-8]$":
     type: object
     $ref: common.yaml#
+    unevaluatedProperties: false
+
     properties:
       led-cur:
         $ref: /schemas/types.yaml#/definitions/uint8
@@ -108,119 +151,119 @@ additionalProperties: false
 
 examples:
   - |
-   #include <dt-bindings/leds/common.h>
-
-   i2c {
-       #address-cells = <1>;
-       #size-cells = <0>;
-
-       led-controller@32 {
-           #address-cells = <1>;
-           #size-cells = <0>;
-           compatible = "ti,lp8501";
-           reg = <0x32>;
-           clock-mode = /bits/ 8 <2>;
-           pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
-
-           led@0 {
-               reg = <0>;
-               chan-name = "d1";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@1 {
-               reg = <1>;
-               chan-name = "d2";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@2 {
-               reg = <2>;
-               chan-name = "d3";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@3 {
-               reg = <3>;
-               chan-name = "d4";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@4 {
-               reg = <4>;
-               chan-name = "d5";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@5 {
-               reg = <5>;
-               chan-name = "d6";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@6 {
-               reg = <6>;
-               chan-name = "d7";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@7 {
-               reg = <7>;
-               chan-name = "d8";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
-
-           led@8 {
-               reg = <8>;
-               chan-name = "d9";
-               led-cur = /bits/ 8 <0x14>;
-               max-cur = /bits/ 8 <0x20>;
-           };
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@32 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "ti,lp8501";
+            reg = <0x32>;
+            clock-mode = /bits/ 8 <2>;
+            pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
+
+            led@0 {
+                reg = <0>;
+                chan-name = "d1";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@1 {
+                reg = <1>;
+                chan-name = "d2";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@2 {
+                reg = <2>;
+                chan-name = "d3";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@3 {
+                reg = <3>;
+                chan-name = "d4";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@4 {
+                reg = <4>;
+                chan-name = "d5";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@5 {
+                reg = <5>;
+                chan-name = "d6";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@6 {
+                reg = <6>;
+                chan-name = "d7";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@7 {
+                reg = <7>;
+                chan-name = "d8";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
+
+            led@8 {
+                reg = <8>;
+                chan-name = "d9";
+                led-cur = /bits/ 8 <0x14>;
+                max-cur = /bits/ 8 <0x20>;
+            };
         };
 
-       led-controller@33 {
-           #address-cells = <1>;
-           #size-cells = <0>;
-           compatible = "national,lp5523";
-           reg = <0x33>;
-           clock-mode = /bits/ 8 <0>;
-
-           multi-led@2 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               reg = <0x2>;
-               color = <LED_COLOR_ID_RGB>;
-               function = LED_FUNCTION_STANDBY;
-               linux,default-trigger = "heartbeat";
-
-               led@0 {
-                   led-cur = /bits/ 8 <50>;
-                   max-cur = /bits/ 8 <100>;
-                   reg = <0x0>;
-                   color = <LED_COLOR_ID_GREEN>;
-               };
-
-               led@1 {
-                   led-cur = /bits/ 8 <50>;
-                   max-cur = /bits/ 8 <100>;
-                   reg = <0x1>;
-                   color = <LED_COLOR_ID_BLUE>;
-               };
-
-               led@6 {
-                   led-cur = /bits/ 8 <50>;
-                   max-cur = /bits/ 8 <100>;
-                   reg = <0x6>;
-                   color = <LED_COLOR_ID_RED>;
-               };
+        led-controller@33 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "national,lp5523";
+            reg = <0x33>;
+            clock-mode = /bits/ 8 <0>;
+
+            multi-led@2 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x2>;
+                color = <LED_COLOR_ID_RGB>;
+                function = LED_FUNCTION_STANDBY;
+                linux,default-trigger = "heartbeat";
+
+                led@0 {
+                    led-cur = /bits/ 8 <50>;
+                    max-cur = /bits/ 8 <100>;
+                    reg = <0x0>;
+                    color = <LED_COLOR_ID_GREEN>;
+                };
+
+                led@1 {
+                    led-cur = /bits/ 8 <50>;
+                    max-cur = /bits/ 8 <100>;
+                    reg = <0x1>;
+                    color = <LED_COLOR_ID_BLUE>;
+                };
+
+                led@6 {
+                    led-cur = /bits/ 8 <50>;
+                    max-cur = /bits/ 8 <100>;
+                    reg = <0x6>;
+                    color = <LED_COLOR_ID_RED>;
+                };
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.yaml b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
index c6f96cabd4d1..fdb08f44a45d 100644
--- a/Documentation/devicetree/bindings/leds/leds-max77650.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
@@ -30,9 +30,8 @@ properties:
 
 patternProperties:
   "^led@[0-2]$":
-    type: object
-    description: |
-      Properties for a single LED.
+    $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       reg:
@@ -41,10 +40,6 @@ patternProperties:
         minimum: 0
         maximum: 2
 
-      label: true
-
-      linux,default-trigger: true
-
 required:
   - compatible
   - "#address-cells"
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
index 45bf9f7d85f3..73353692efa1 100644
--- a/Documentation/devicetree/bindings/leds/leds-mt6323.txt
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -9,7 +9,7 @@ MT6323 PMIC hardware.
 For MT6323 MFD bindings see:
 Documentation/devicetree/bindings/mfd/mt6397.txt
 For MediaTek PMIC wrapper bindings see:
-Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
 
 Required properties:
 - compatible : Must be "mediatek,mt6323-led"
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6360.yaml b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
new file mode 100644
index 000000000000..d84e28e616d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6360.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-mt6360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MT6360 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  This module is part of the MT6360 MFD device.
+  see Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
+  Add MT6360 LED driver include 2-channel Flash LED with torch/strobe mode,
+  and 4-channel RGB LED support Register/Flash/Breath Mode
+
+properties:
+  compatible:
+    const: mediatek,mt6360-led
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^multi-led@[0-5]$":
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: Index of the LED.
+        enum:
+          - 0 # LED output ISINK1
+          - 1 # LED output ISINK2
+          - 2 # LED output ISINK3
+          - 3 # LED output ISINKML
+          - 4 # LED output FLASH1
+          - 5 # LED output FLASH2
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            enum: [0, 1, 2]
+
+        required:
+          - reg
+          - color
+
+    required:
+      - reg
+      - "#address-cells"
+      - "#size-cells"
+
+  "^led@[0-5]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+    description:
+      Properties for a single LED.
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3, 4, 5]
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/leds/common.h>
+   led-controller {
+     compatible = "mediatek,mt6360-led";
+     #address-cells = <1>;
+     #size-cells = <0>;
+
+     multi-led@0 {
+       reg = <0>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_RGB>;
+       led-max-microamp = <24000>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+       led@0 {
+         reg = <0>;
+         color = <LED_COLOR_ID_RED>;
+       };
+       led@1 {
+         reg = <1>;
+         color = <LED_COLOR_ID_GREEN>;
+       };
+       led@2 {
+         reg = <2>;
+         color = <LED_COLOR_ID_BLUE>;
+       };
+     };
+     led@3 {
+       reg = <3>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_WHITE>;
+       led-max-microamp = <150000>;
+     };
+     led@4 {
+       reg = <4>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <1>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+     led@5 {
+       reg = <5>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <2>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+   };
+
+  - |
+
+   led-controller {
+     compatible = "mediatek,mt6360-led";
+     #address-cells = <1>;
+     #size-cells = <0>;
+
+     led@0 {
+       reg = <0>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_RED>;
+       led-max-microamp = <24000>;
+     };
+     led@1 {
+       reg = <1>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_GREEN>;
+       led-max-microamp = <24000>;
+     };
+     led@2 {
+       reg = <2>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_BLUE>;
+       led-max-microamp = <24000>;
+     };
+     led@3 {
+       reg = <3>;
+       function = LED_FUNCTION_INDICATOR;
+       color = <LED_COLOR_ID_WHITE>;
+       led-max-microamp = <150000>;
+     };
+     led@4 {
+       reg = <4>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <1>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+     led@5 {
+       reg = <5>;
+       function = LED_FUNCTION_FLASH;
+       color = <LED_COLOR_ID_WHITE>;
+       function-enumerator = <2>;
+       led-max-microamp = <200000>;
+       flash-max-microamp = <500000>;
+       flash-max-timeout-us = <1024000>;
+     };
+   };
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-pca9532.txt b/Documentation/devicetree/bindings/leds/leds-pca9532.txt
deleted file mode 100644
index f769c52e3643..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-pca9532.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-*NXP - pca9532 PWM LED Driver
-
-The PCA9532 family is SMBus I/O expander optimized for dimming LEDs.
-The PWM support 256 steps.
-
-Required properties:
-	- compatible:
-		"nxp,pca9530"
-		"nxp,pca9531"
-		"nxp,pca9532"
-		"nxp,pca9533"
-	- reg -  I2C slave address
-
-Each led is represented as a sub-node of the nxp,pca9530.
-
-Optional sub-node properties:
-	- label: see Documentation/devicetree/bindings/leds/common.txt
-	- type: Output configuration, see dt-bindings/leds/leds-pca9532.h (default NONE)
-	- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
-	- default-state: see Documentation/devicetree/bindings/leds/common.txt
-	  This property is only valid for sub-nodes of type <PCA9532_TYPE_LED>.
-
-Example:
-  #include <dt-bindings/leds/leds-pca9532.h>
-
-  leds: pca9530@60 {
-    compatible = "nxp,pca9530";
-    reg = <0x60>;
-
-    red-power {
-      label = "pca:red:power";
-      type = <PCA9532_TYPE_LED>;
-    };
-    green-power {
-      label = "pca:green:power";
-      type = <PCA9532_TYPE_LED>;
-    };
-    kernel-booting {
-      type = <PCA9532_TYPE_LED>;
-      default-state = "on";
-    };
-    sys-stat {
-      type = <PCA9532_TYPE_LED>;
-      default-state = "keep"; // don't touch, was set by U-Boot
-    };
-  };
-
-For more product information please see the link below:
-http://nxp.com/documents/data_sheet/PCA9532.pdf
diff --git a/Documentation/devicetree/bindings/leds/leds-pm8058.txt b/Documentation/devicetree/bindings/leds/leds-pm8058.txt
deleted file mode 100644
index 89584c49aab2..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-pm8058.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-Qualcomm PM8058 LED driver
-
-The Qualcomm PM8058 is a multi-functional device which contains
-an LED driver block for up to six LEDs: three normal LEDs, two
-"flash" LEDs and one "keypad backlight" LED. The names are
-quoted because sometimes these LED drivers are used for wildly
-different things than flash or keypad backlight: their names
-are more of a suggestion than a hard-wired usecase.
-
-Hardware-wise the different LEDs support slightly different
-output currents. The "flash" LEDs do not need to charge nor
-do they support external triggers. They are just powerful LED
-drivers.
-
-The LEDs appear as children to the PM8058 device, with the
-proper compatible string. For the PM8058 bindings see:
-mfd/qcom-pm8xxx.txt.
-
-Each LED is represented as a sub-node of the syscon device. Each
-node's name represents the name of the corresponding LED.
-
-LED sub-node properties:
-
-Required properties:
-- compatible: one of
-  "qcom,pm8058-led" (for the normal LEDs at 0x131, 0x132 and 0x133)
-  "qcom,pm8058-keypad-led" (for the "keypad" LED at 0x48)
-  "qcom,pm8058-flash-led" (for the "flash" LEDs at 0x49 and 0xFB)
-
-Optional properties:
-- label: see Documentation/devicetree/bindings/leds/common.txt
-- default-state: see Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-qcom,ssbi@500000 {
-	pmicintc: pmic@0 {
-		compatible = "qcom,pm8058";
-		led@48 {
-			compatible = "qcom,pm8058-keypad-led";
-			reg = <0x48>;
-			label = "pm8050:white:keypad";
-			default-state = "off";
-		};
-		led@131 {
-			compatible = "qcom,pm8058-led";
-			reg = <0x131>;
-			label = "pm8058:red";
-			default-state = "off";
-		};
-		led@132 {
-			compatible = "qcom,pm8058-led";
-			reg = <0x132>;
-			label = "pm8058:yellow";
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-		led@133 {
-			compatible = "qcom,pm8058-led";
-			reg = <0x133>;
-			label = "pm8058:green";
-			default-state = "on";
-			linux,default-trigger = "heartbeat";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
new file mode 100644
index 000000000000..bd6ec04a8727
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-pwm-multicolor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Multi-color LEDs connected to PWM
+
+maintainers:
+  - Sven Schwermer <sven.schwermer@disruptive-technologies.com>
+
+description: |
+  This driver combines several monochrome PWM LEDs into one multi-color
+  LED using the multicolor LED class.
+
+properties:
+  compatible:
+    const: pwm-leds-multicolor
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      max-brightness:
+        description:
+          Maximum brightness possible for the LED
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    patternProperties:
+      "^led-[0-9a-z]+$":
+        type: object
+        $ref: common.yaml#
+
+        additionalProperties: false
+
+        properties:
+          pwms:
+            maxItems: 1
+
+          pwm-names: true
+
+          active-low:
+            description: For PWMs where the LED is wired to supply rather than ground.
+            type: boolean
+
+          color: true
+
+        required:
+          - pwms
+          - color
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "pwm-leds-multicolor";
+
+        multi-led {
+            color = <LED_COLOR_ID_RGB>;
+            function = LED_FUNCTION_INDICATOR;
+            max-brightness = <65535>;
+
+            led-red {
+                pwms = <&pwm1 0 1000000>;
+                color = <LED_COLOR_ID_RED>;
+            };
+
+            led-green {
+                pwms = <&pwm2 0 1000000>;
+                color = <LED_COLOR_ID_GREEN>;
+            };
+
+            led-blue {
+                pwms = <&pwm3 0 1000000>;
+                color = <LED_COLOR_ID_BLUE>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
index fe4d5fd25913..7de6da58be3c 100644
--- a/Documentation/devicetree/bindings/leds/leds-pwm.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
@@ -20,8 +20,8 @@ properties:
 patternProperties:
   "^led(-[0-9a-f]+)?$":
     type: object
-
     $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       pwms:
diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
new file mode 100644
index 000000000000..6295c91f43e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Light Pulse Generator
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: >
+  The Qualcomm Light Pulse Generator consists of three different hardware blocks;
+  a ramp generator with lookup table, the light pulse generator and a three
+  channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm660l-lpg
+      - qcom,pm8150b-lpg
+      - qcom,pm8150l-lpg
+      - qcom,pm8350c-pwm
+      - qcom,pm8916-pwm
+      - qcom,pm8941-lpg
+      - qcom,pm8994-lpg
+      - qcom,pmc8180c-lpg
+      - qcom,pmi8994-lpg
+      - qcom,pmi8998-lpg
+      - qcom,pmk8550-pwm
+
+  "#pwm-cells":
+    const: 2
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  qcom,power-source:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      power-source used to drive the output, as defined in the datasheet.
+      Should be specified if the TRILED block is present
+    enum: [0, 1, 3]
+
+  qcom,dtest:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: >
+      A list of integer pairs, where each pair represent the dtest line the
+      particular channel should be connected to and the flags denoting how the
+      value should be outputed, as defined in the datasheet. The number of
+      pairs should be the same as the number of channels.
+    items:
+      items:
+        - description: dtest line to attach
+        - description: flags for the attachment
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-9a-f]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            maxItems: 1
+
+        required:
+          - reg
+
+patternProperties:
+  "^led@[0-9a-f]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi8994-lpg";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qcom,power-source = <1>;
+
+      qcom,dtest = <0 0>,
+                   <0 0>,
+                   <0 0>,
+                   <4 1>;
+
+      led@1 {
+        reg = <1>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <1>;
+      };
+
+      led@2 {
+        reg = <2>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <0>;
+        default-state = "on";
+      };
+
+      led@3 {
+        reg = <3>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <2>;
+      };
+
+      led@4 {
+        reg = <4>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <3>;
+      };
+    };
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi8994-lpg";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qcom,power-source = <1>;
+
+      multi-led {
+        color = <LED_COLOR_ID_RGB>;
+        function = LED_FUNCTION_STATUS;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@1 {
+          reg = <1>;
+          color = <LED_COLOR_ID_RED>;
+        };
+
+        led@2 {
+          reg = <2>;
+          color = <LED_COLOR_ID_GREEN>;
+        };
+
+        led@3 {
+          reg = <3>;
+          color = <LED_COLOR_ID_BLUE>;
+        };
+      };
+    };
+  - |
+    pwm-controller {
+      compatible = "qcom,pm8916-pwm";
+      #pwm-cells = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-rt4505.yaml b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml
index 5b0c74aa6723..bfd0e240f7d6 100644
--- a/Documentation/devicetree/bindings/leds/leds-rt4505.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml
@@ -27,6 +27,7 @@ properties:
   led:
     type: object
     $ref: common.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
@@ -38,7 +39,7 @@ examples:
   - |
     #include <dt-bindings/leds/common.h>
 
-    i2c0 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
index f68259619488..4d2ffe5fcfc7 100644
--- a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
@@ -18,7 +18,9 @@ description: |
 
 properties:
   compatible:
-    const: sgmicro,sgm3140
+    enum:
+      - ocs,ocp8110
+      - sgmicro,sgm3140
 
   enable-gpios:
     maxItems: 1
@@ -34,6 +36,7 @@ properties:
   led:
     type: object
     $ref: common.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/leds/maxim,max77693.yaml b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml
new file mode 100644
index 000000000000..e27f57bb52ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/maxim,max77693.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC LEDs
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+  Circuit (MUIC).
+
+  There are two LED outputs available - FLED1 and FLED2. Each of them can
+  control a separate LED or they can be connected together to double the
+  maximum current for a single connected LED. One LED is represented by one
+  child node.
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    const: maxim,max77693-led
+
+  maxim,boost-mode:
+    description:
+      In boost mode the device can produce up to 1.2A of total current on both
+      outputs. The maximum current on each output is reduced to 625mA then. If
+      not enabled explicitly, boost setting defaults to LEDS_BOOST_FIXED in
+      case both current sources are used.
+      See LEDS_BOOST_* in include/dt-bindings/leds/common.h.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  maxim,boost-mvout:
+    description: |
+      Output voltage of the boost module in millivolts.
+      Valid values: 3300 - 5500, step by 25 (rounded down)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 3300
+    maximum: 5500
+    default: 3300
+
+  maxim,mvsys-min:
+    description: |
+      Low input voltage level in millivolts. Flash is not fired if chip
+      estimates that system voltage could drop below this level due to flash
+      power consumption.
+      Valid values: 2400 - 3400, step by 33 (rounded down)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 2400
+    maximum: 3400
+    default: 2400
+
+patternProperties:
+  "^([a-z]+-)?led[01]?$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      led-sources:
+        allOf:
+          - minItems: 1
+            maxItems: 2
+            items:
+              minimum: 0
+              maximum: 1
+
+      led-max-microamp:
+        description: |
+          Valid values for a LED connected to one FLED output:
+            15625 - 250000, step by 15625 (rounded down)
+          Valid values for a LED connected to both FLED outputs:
+            15625 - 500000, step by 15625 (rounded down)
+
+      flash-max-microamp:
+        description: |
+          Valid values for a single LED connected to one FLED output
+          (boost mode must be turned off):
+            15625 - 1000000, step by 15625 (rounded down)
+          Valid values for a single LED connected to both FLED outputs:
+            15625 - 1250000, step by 15625 (rounded down)
+          Valid values for two LEDs case:
+            15625 - 625000, step by 15625 (rounded down)
+
+      flash-max-timeout-us:
+        description: |
+          Valid values: 62500 - 1000000, step by 62500 (rounded down)
+        minimum: 62500
+        maximum: 1000000
+
+    required:
+      - flash-max-microamp
+      - flash-max-timeout-us
+      - led-max-microamp
+      - led-sources
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
new file mode 100644
index 000000000000..e9d02ed6a590
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/mediatek,mt6370-flashlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Flash LED driver for MT6370 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Alice Chen <alice_chen@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  Add MT6370 flash LED driver include 2-channel flash LED support Torch/Strobe Mode.
+
+properties:
+  compatible:
+    const: mediatek,mt6370-flashlight
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@[0-1]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [0, 1]
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
new file mode 100644
index 000000000000..16b3abc2af3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/mediatek,mt6370-indicator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MT6370 PMIC from MediaTek Integrated.
+
+maintainers:
+  - Alice Chen <alice_chen@richtek.com>
+
+description: |
+  This module is part of the MT6370 MFD device.
+  Add MT6370 LED driver include 4-channel RGB LED support Register/PWM/Breath Mode
+
+properties:
+  compatible:
+    const: mediatek,mt6370-indicator
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^multi-led@[0-3]$":
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3]
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-2]$":
+        type: object
+        $ref: common.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            enum: [0, 1, 2]
+
+        required:
+          - reg
+          - color
+
+    required:
+      - reg
+      - color
+      - "#address-cells"
+      - "#size-cells"
+
+  "^led@[0-3]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        enum: [0, 1, 2, 3]
+
+    required:
+      - reg
+      - color
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/leds/nxp,pca953x.yaml b/Documentation/devicetree/bindings/leds/nxp,pca953x.yaml
new file mode 100644
index 000000000000..edf6f55df685
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/nxp,pca953x.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/nxp,pca953x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA9532 LED Dimmer
+
+maintainers:
+  - Riku Voipio <riku.voipio@iki.fi>
+
+description: |
+  The PCA9532 family is SMBus I/O expander optimized for dimming LEDs.
+  The PWM support 256 steps.
+
+  For more product information please see the link below:
+    https://www.nxp.com/docs/en/data-sheet/PCA9532.pdf
+
+properties:
+  compatible:
+    enum:
+      - nxp,pca9530
+      - nxp,pca9531
+      - nxp,pca9532
+      - nxp,pca9533
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+patternProperties:
+  "^led-[0-9a-z]+$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      type:
+        description: |
+          Output configuration, see include/dt-bindings/leds/leds-pca9532.h
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 0
+        minimum: 0
+        maximum: 4
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/leds-pca9532.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@62 {
+            compatible = "nxp,pca9533";
+            reg = <0x62>;
+
+            led-1 {
+                label = "pca:red:power";
+                type = <PCA9532_TYPE_LED>;
+            };
+
+            led-2 {
+                label = "pca:green:power";
+                type = <PCA9532_TYPE_LED>;
+            };
+
+            led-3 {
+                type = <PCA9532_TYPE_LED>;
+                default-state = "on";
+            };
+
+            led-4 {
+                type = <PCA9532_TYPE_LED>;
+                default-state = "keep";
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml b/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml
new file mode 100644
index 000000000000..fa03e73622d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/qcom,pm8058-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8058 PMIC LED
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  The Qualcomm PM8058 contains an LED block for up to six LEDs:: three normal
+  LEDs, two "flash" LEDs and one "keypad backlight" LED. The names are quoted
+  because sometimes these LED drivers are used for wildly different things than
+  flash or keypad backlight:: their names are more of a suggestion than a
+  hard-wired usecase.
+
+  Hardware-wise the different LEDs support slightly different output currents.
+  The "flash" LEDs do not need to charge nor do they support external triggers.
+  They are just powerful LED drivers.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8058-led
+      - qcom,pm8058-keypad-led
+      - qcom,pm8058-flash-led
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@131 {
+            compatible = "qcom,pm8058-led";
+            reg = <0x131>;
+            label = "pm8058:red";
+            color = <LED_COLOR_ID_RED>;
+            default-state = "off";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
new file mode 100644
index 000000000000..ffacf703d9f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/qcom,spmi-flash-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Flash LED device inside Qualcomm Technologies, Inc. PMICs
+
+maintainers:
+  - Fenglin Wu <quic_fenglinw@quicinc.com>
+
+description: |
+  Flash LED controller is present inside some Qualcomm Technologies, Inc. PMICs.
+  The flash LED module can have different number of LED channels supported
+  e.g. 3 or 4. There are some different registers between them but they can
+  both support maximum current up to 1.5 A per channel and they can also support
+  ganging 2 channels together to supply maximum current up to 2 A. The current
+  will be split symmetrically on each channel and they will be enabled and
+  disabled at the same time.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,pm6150l-flash-led
+          - qcom,pm8150c-flash-led
+          - qcom,pm8150l-flash-led
+          - qcom,pm8350c-flash-led
+      - const: qcom,spmi-flash-led
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^led-[0-3]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+    description:
+      Represents the physical LED components which are connected to the
+      flash LED channels' output.
+
+    properties:
+      led-sources:
+        description:
+          The HW indices of the flash LED channels that connect to the
+          physical LED
+        allOf:
+          - minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2, 3, 4]
+
+      led-max-microamp:
+        anyOf:
+          - minimum: 5000
+            maximum: 500000
+            multipleOf: 5000
+          - minimum: 10000
+            maximum: 1000000
+            multipleOf: 10000
+
+      flash-max-microamp:
+        anyOf:
+          - minimum: 12500
+            maximum: 1500000
+            multipleOf: 12500
+          - minimum: 25000
+            maximum: 2000000
+            multipleOf: 25000
+
+      flash-max-timeout-us:
+        minimum: 10000
+        maximum: 1280000
+        multipleOf: 10000
+
+    required:
+      - led-sources
+      - led-max-microamp
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+    spmi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        led-controller@ee00 {
+            compatible = "qcom,pm8350c-flash-led", "qcom,spmi-flash-led";
+            reg = <0xee00>;
+
+            led-0 {
+                function = LED_FUNCTION_FLASH;
+                color = <LED_COLOR_ID_WHITE>;
+                led-sources = <1>, <4>;
+                led-max-microamp = <300000>;
+                flash-max-microamp = <2000000>;
+                flash-max-timeout-us = <1280000>;
+                function-enumerator = <0>;
+            };
+
+            led-1 {
+                function = LED_FUNCTION_FLASH;
+                color = <LED_COLOR_ID_YELLOW>;
+                led-sources = <2>, <3>;
+                led-max-microamp = <300000>;
+                flash-max-microamp = <2000000>;
+                flash-max-timeout-us = <1280000>;
+                function-enumerator = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.txt b/Documentation/devicetree/bindings/leds/register-bit-led.txt
deleted file mode 100644
index c7af6f70a97b..000000000000
--- a/Documentation/devicetree/bindings/leds/register-bit-led.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-Device Tree Bindings for Register Bit LEDs
-
-Register bit leds are used with syscon multifunctional devices
-where single bits in a certain register can turn on/off a
-single LED. The register bit LEDs appear as children to the
-syscon device, with the proper compatible string. For the
-syscon bindings see:
-Documentation/devicetree/bindings/mfd/syscon.yaml
-
-Each LED is represented as a sub-node of the syscon device. Each
-node's name represents the name of the corresponding LED.
-
-LED sub-node properties:
-
-Required properties:
-- compatible : must be "register-bit-led"
-- offset : register offset to the register controlling this LED
-- mask : bit mask for the bit controlling this LED in the register
-  typically 0x01, 0x02, 0x04 ...
-
-Optional properties:
-- label : (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger : (optional)
-  see Documentation/devicetree/bindings/leds/common.txt
-- default-state: (optional) The initial state of the LED
-  see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-syscon: syscon@10000000 {
-	compatible = "arm,realview-pb1176-syscon", "syscon";
-	reg = <0x10000000 0x1000>;
-
-	led@8.0 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x01>;
-		label = "versatile:0";
-		linux,default-trigger = "heartbeat";
-		default-state = "on";
-	};
-	led@8.1 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x02>;
-		label = "versatile:1";
-		linux,default-trigger = "mmc0";
-		default-state = "off";
-	};
-	led@8.2 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x04>;
-		label = "versatile:2";
-		linux,default-trigger = "cpu0";
-		default-state = "off";
-	};
-	led@8.3 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x08>;
-		label = "versatile:3";
-		default-state = "off";
-	};
-	led@8.4 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x10>;
-		label = "versatile:4";
-		default-state = "off";
-	};
-	led@8.5 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x20>;
-		label = "versatile:5";
-		default-state = "off";
-	};
-	led@8.6 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x40>;
-		label = "versatile:6";
-		default-state = "off";
-	};
-	led@8.7 {
-		compatible = "register-bit-led";
-		offset = <0x08>;
-		mask = <0x80>;
-		label = "versatile:7";
-		default-state = "off";
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.yaml b/Documentation/devicetree/bindings/leds/register-bit-led.yaml
new file mode 100644
index 000000000000..ed26ec19ecbd
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/register-bit-led.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/register-bit-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Register Bit LEDs
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |+
+  Register bit leds are used with syscon multifunctional devices where single
+  bits in a certain register can turn on/off a single LED. The register bit LEDs
+  appear as children to the syscon device, with the proper compatible string.
+  For the syscon bindings see:
+  Documentation/devicetree/bindings/mfd/syscon.yaml
+
+allOf:
+  - $ref: /schemas/leds/common.yaml#
+
+properties:
+  $nodename:
+    description:
+      The unit-address is in the form of @<reg addr>,<bit offset>
+    pattern: '^led@[0-9a-f]+,[0-9a-f]{1,2}$'
+
+  compatible:
+    const: register-bit-led
+
+  reg:
+    description:
+      The register address and size
+    maxItems: 1
+
+  mask:
+    description:
+      bit mask for the bit controlling this LED in the register
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      [ 0x1, 0x2, 0x4, 0x8, 0x10, 0x20, 0x40, 0x80, 0x100, 0x200, 0x400, 0x800,
+        0x1000, 0x2000, 0x4000, 0x8000, 0x10000, 0x20000, 0x40000, 0x80000,
+        0x100000, 0x200000, 0x400000, 0x800000, 0x1000000, 0x2000000, 0x4000000,
+        0x8000000, 0x10000000, 0x20000000, 0x40000000, 0x80000000 ]
+
+  offset:
+    description:
+      register offset to the register controlling this LED
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+
+required:
+  - compatible
+  - mask
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    syscon@10000000 {
+        compatible = "arm,realview-pb1176-syscon", "syscon";
+        reg = <0x10000000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x10000000 0x1000>;
+
+        led@8,0 {
+            compatible = "register-bit-led";
+            reg = <0x08 0x04>;
+            offset = <0x08>;
+            mask = <0x01>;
+            label = "versatile:0";
+            linux,default-trigger = "heartbeat";
+            default-state = "on";
+        };
+        led@8,1 {
+            compatible = "register-bit-led";
+            reg = <0x08 0x04>;
+            offset = <0x08>;
+            mask = <0x02>;
+            label = "versatile:1";
+            default-state = "off";
+        };
+        led@8,2 {
+            compatible = "register-bit-led";
+            reg = <0x08 0x04>;
+            offset = <0x08>;
+            mask = <0x04>;
+            label = "versatile:2";
+            default-state = "off";
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/regulator-led.yaml b/Documentation/devicetree/bindings/leds/regulator-led.yaml
new file mode 100644
index 000000000000..4ef7b96e9a08
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/regulator-led.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/regulator-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator LEDs
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Regulator LEDs are powered by a single regulator such that they can
+  be turned on or off by enabling or disabling the regulator. The available
+  brightness settings will be inferred from the available voltages on the
+  regulator, and any constraints on the voltage or current will need to be
+  specified on the regulator.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  $nodename:
+    pattern: '^led.*$'
+
+  compatible:
+    const: regulator-led
+
+  vled-supply:
+    description:
+      The regulator controlling the current to the LED.
+
+  function: true
+  color: true
+  linux,default-trigger: true
+  default-state: true
+
+required:
+  - compatible
+  - vled-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-heartbeat {
+        compatible = "regulator-led";
+        vled-supply = <&regulator>;
+        function = LED_FUNCTION_STATUS;
+        color = <LED_COLOR_ID_BLUE>;
+        linux,default-trigger = "heartbeat";
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
new file mode 100644
index 000000000000..14700a2e5fea
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/rohm,bd2606mvv.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/rohm,bd2606mvv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD2606MVV LED controller
+
+maintainers:
+  - Andreas Kemnade <andreas@kemnade.info>
+
+description:
+  The BD2606 MVV is a programmable LED controller connected via I2C that can
+  drive 6 separate lines. Each of them can be individually switched on and off,
+  but the brightness setting is shared between pairs of them.
+
+  Datasheet is available at
+  https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf
+
+properties:
+  compatible:
+    const: rohm,bd2606mvv
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  enable-gpios:
+    maxItems: 1
+    description: GPIO pin to enable/disable the device.
+
+patternProperties:
+  "^led@[0-6]$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 6
+
+    required:
+      - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@66 {
+            compatible = "rohm,bd2606mvv";
+            reg = <0x66>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@0 {
+                reg = <0x0>;
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_POWER;
+            };
+
+            led@2 {
+                reg = <0x2>;
+                color = <LED_COLOR_ID_WHITE>;
+                function = LED_FUNCTION_STATUS;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
index 86a37c92b834..64b0be9cf70b 100644
--- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: ROHM BD71828 Power Management Integrated Circuit LED driver
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   This module is part of the ROHM BD71828 MFD device. For more details
@@ -26,26 +26,16 @@ properties:
 
 patternProperties:
   "^led-[1-2]$":
-    type: object
-    description:
-      Properties for a single LED.
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
     properties:
-      #allOf:
-        #- $ref: "common.yaml#"
       rohm,led-compatible:
         description: LED identification string
         $ref: "/schemas/types.yaml#/definitions/string"
         enum:
           - bd71828-ambled
           - bd71828-grnled
-      function:
-        description:
-          Purpose of LED as defined in dt-bindings/leds/common.h
-        $ref: "/schemas/types.yaml#/definitions/string"
-      color:
-        description:
-          LED colour as defined in dt-bindings/leds/common.h
-        $ref: "/schemas/types.yaml#/definitions/uint32"
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
new file mode 100644
index 000000000000..a6aaa92dbccd
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/skyworks,aat1290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The device is controlled through two pins:: FL_EN and EN_SET. The pins when,
+  asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
+  respectively. In order to add a capability of selecting the strobe signal
+  source (e.g. CPU or camera sensor) there is an additional switch required,
+  independent of the flash chip. The switch is controlled with pin control.
+
+properties:
+  compatible:
+    const: skyworks,aat1290
+
+  enset-gpios:
+    maxItems: 1
+    description: EN_SET pin
+
+  flen-gpios:
+    maxItems: 1
+    description: FL_EN pin
+
+  led:
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      led-max-microamp: true
+
+      flash-max-microamp:
+        description: |
+          Maximum flash LED supply current can be calculated using following
+          formula:: I = 1A * 162 kOhm / Rset.
+
+      flash-max-timeout-us:
+        description: |
+          Maximum flash timeout can be calculated using following formula::
+            T = 8.82 * 10^9 * Ct.
+
+    required:
+      - flash-max-microamp
+      - flash-max-timeout-us
+      - led-max-microamp
+
+  pinctrl-names:
+    items:
+      - const: default
+      - const: host
+      - const: isp
+
+  pinctrl-0: true
+  pinctrl-1: true
+  pinctrl-2: true
+
+required:
+  - compatible
+  - enset-gpios
+  - flen-gpios
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    // Ct = 220 nF, Rset = 160 kOhm
+    led-controller {
+        compatible = "skyworks,aat1290";
+        flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+        enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+        pinctrl-names = "default", "host", "isp";
+        pinctrl-0 = <&camera_flash_host>;
+        pinctrl-1 = <&camera_flash_host>;
+        pinctrl-2 = <&camera_flash_isp>;
+
+        led {
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            led-max-microamp = <520833>;
+            flash-max-microamp = <1012500>;
+            flash-max-timeout-us = <1940000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/ti,tca6507.yaml b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
index 32c600387895..4b1575e4f180 100644
--- a/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
+++ b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
@@ -38,8 +38,8 @@ properties:
 patternProperties:
   "^led@[0-6]$":
     type: object
-
     $ref: common.yaml#
+    unevaluatedProperties: false
 
     properties:
       reg:
@@ -87,7 +87,7 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/leds/common.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
index aa2b3bf56b57..385809ed1569 100644
--- a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
@@ -2,13 +2,13 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mailbox/amlogic,meson-gxbb-mhu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mailbox/amlogic,meson-gxbb-mhu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson Message-Handling-Unit Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic's Meson SoCs Message-Handling-Unit (MHU) is a mailbox controller
@@ -51,4 +51,3 @@ examples:
           interrupts = <208>, <209>, <210>;
           #mbox-cells = <1>;
     };
-
diff --git a/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml b/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
new file mode 100644
index 000000000000..4c0668e5f0bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/apple,mailbox.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/apple,mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple Mailbox Controller
+
+maintainers:
+  - Hector Martin <marcan@marcan.st>
+  - Sven Peter <sven@svenpeter.dev>
+
+description:
+  The Apple mailbox consists of two FIFOs used to exchange 64+32 bit
+  messages between the main CPU and a co-processor. Multiple instances
+  of this mailbox can be found on Apple SoCs.
+  One of the two FIFOs is used to send data to a co-processor while the other
+  FIFO is used for the other direction.
+  Various clients implement different IPC protocols based on these simple
+  messages and shared memory buffers.
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          ASC mailboxes are the most common variant found on the M1 used
+          for example for the display controller, the system management
+          controller and the NVMe coprocessor.
+        items:
+          - enum:
+              - apple,t8103-asc-mailbox
+              - apple,t8112-asc-mailbox
+              - apple,t6000-asc-mailbox
+          - const: apple,asc-mailbox-v4
+
+      - description:
+          M3 mailboxes are an older variant with a slightly different MMIO
+          interface still found on the M1. It is used for the Thunderbolt
+          co-processors.
+        items:
+          - enum:
+              - apple,t8103-m3-mailbox
+              - apple,t8112-m3-mailbox
+              - apple,t6000-m3-mailbox
+          - const: apple,m3-mailbox-v2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: send fifo is empty interrupt
+      - description: send fifo is not empty interrupt
+      - description: receive fifo is empty interrupt
+      - description: receive fifo is not empty interrupt
+
+  interrupt-names:
+    items:
+      - const: send-empty
+      - const: send-not-empty
+      - const: recv-empty
+      - const: recv-not-empty
+
+  "#mbox-cells":
+    const: 0
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+        mailbox@77408000 {
+                compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+                reg = <0x77408000 0x4000>;
+                interrupts = <1 583 4>, <1 584 4>, <1 585 4>, <1 586 4>;
+                interrupt-names = "send-empty", "send-not-empty",
+                 "recv-empty", "recv-not-empty";
+                #mbox-cells = <0>;
+        };
diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
index bd49c201477d..d9a4f4a02d7c 100644
--- a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
@@ -57,6 +57,7 @@ properties:
     maxItems: 1
 
   interrupts:
+    minItems: 2
     items:
       - description: low-priority non-secure
       - description: high-priority non-secure
diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
index 675ad9de15bb..191c1ce15009 100644
--- a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml
@@ -28,6 +28,12 @@ properties:
       - const: fsl,imx7ulp-mu
       - const: fsl,imx8ulp-mu
       - const: fsl,imx8-mu-scu
+      - const: fsl,imx8-mu-seco
+      - const: fsl,imx93-mu-s4
+      - const: fsl,imx8ulp-mu-s4
+      - items:
+          - const: fsl,imx93-mu
+          - const: fsl,imx8ulp-mu
       - items:
           - enum:
               - fsl,imx7s-mu
@@ -50,7 +56,14 @@ properties:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: tx
+      - const: rx
 
   "#mbox-cells":
     description: |
@@ -59,14 +72,16 @@ properties:
       type      : Channel type
       channel   : Channel number
 
-      This MU support 4 type of unidirectional channels, each type
-      has 4 channels. A total of 16 channels. Following types are
+      This MU support 5 type of unidirectional channels, each type
+      has 4 channels except RST channel which only has 1 channel.
+      A total of 17 channels.  Following types are
       supported:
       0 - TX channel with 32bit transmit register and IRQ transmit
           acknowledgment support.
       1 - RX channel with 32bit receive register and IRQ support
       2 - TX doorbell channel. Without own register and no ACK support.
       3 - RX doorbell channel.
+      4 - RST channel
     const: 2
 
   clocks:
@@ -85,6 +100,27 @@ required:
   - interrupts
   - "#mbox-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx93-mu-s4
+    then:
+      properties:
+        interrupt-names:
+          minItems: 2
+        interrupts:
+          minItems: 2
+
+    else:
+      properties:
+        interrupts:
+          maxItems: 1
+      not:
+        required:
+          - interrupt-names
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
new file mode 100644
index 000000000000..cef9d7601398
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mediatek,gce-mailbox.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/mediatek,gce-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Global Command Engine Mailbox
+
+maintainers:
+  - Houlong Wei <houlong.wei@mediatek.com>
+
+description:
+  The Global Command Engine (GCE) is used to help read/write registers with
+  critical time limitation, such as updating display configuration during the
+  vblank. The GCE can be used to implement the Command Queue (CMDQ) driver.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - mediatek,mt6779-gce
+          - mediatek,mt8173-gce
+          - mediatek,mt8183-gce
+          - mediatek,mt8186-gce
+          - mediatek,mt8188-gce
+          - mediatek,mt8192-gce
+          - mediatek,mt8195-gce
+      - items:
+          - const: mediatek,mt6795-gce
+          - const: mediatek,mt8173-gce
+
+  "#mbox-cells":
+    const: 2
+    description:
+      The first cell describes the Thread ID of the GCE,
+      the second cell describes the priority of the GCE thread
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Global Command Engine clock
+
+  clock-names:
+    items:
+      - const: gce
+
+required:
+  - compatible
+  - "#mbox-cells"
+  - reg
+  - interrupts
+  - clocks
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: mediatek,mt8195-gce
+    then:
+      required:
+        - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        gce: mailbox@10212000 {
+            compatible = "mediatek,mt8173-gce";
+            reg = <0 0x10212000 0 0x1000>;
+            interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+            #mbox-cells = <2>;
+            clocks = <&infracfg CLK_INFRA_GCE>;
+            clock-names = "gce";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml
new file mode 100644
index 000000000000..404477910f02
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/microchip,mpfs-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) mailbox controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+properties:
+  compatible:
+    const: microchip,mpfs-mailbox
+
+  reg:
+    oneOf:
+      - items:
+          - description: mailbox control & data registers
+          - description: mailbox interrupt registers
+        deprecated: true
+      - items:
+          - description: mailbox control registers
+          - description: mailbox interrupt registers
+          - description: mailbox data registers
+
+  interrupts:
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      mbox: mailbox@37020000 {
+        compatible = "microchip,mpfs-mailbox";
+        reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>,
+              <0x0 0x37020800 0x0 0x100>;
+        interrupt-parent = <&L1>;
+        interrupts = <96>;
+        #mbox-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml
deleted file mode 100644
index bbb173ea483c..000000000000
--- a/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml
+++ /dev/null
@@ -1,47 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: "http://devicetree.org/schemas/mailbox/microchip,polarfire-soc-mailbox.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
-
-title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) mailbox controller
-
-maintainers:
-  - Conor Dooley <conor.dooley@microchip.com>
-
-properties:
-  compatible:
-    const: microchip,polarfire-soc-mailbox
-
-  reg:
-    items:
-      - description: mailbox data registers
-      - description: mailbox interrupt registers
-
-  interrupts:
-    maxItems: 1
-
-  "#mbox-cells":
-    const: 1
-
-required:
-  - compatible
-  - reg
-  - interrupts
-  - "#mbox-cells"
-
-additionalProperties: false
-
-examples:
-  - |
-    soc {
-      #address-cells = <2>;
-      #size-cells = <2>;
-      mbox: mailbox@37020000 {
-        compatible = "microchip,polarfire-soc-mailbox";
-        reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318c 0x0 0x40>;
-        interrupt-parent = <&L1>;
-        interrupts = <96>;
-        #mbox-cells = <1>;
-      };
-    };
diff --git a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
new file mode 100644
index 000000000000..72c1d9e82c89
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/mtk,adsp-mbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek ADSP mailbox
+
+maintainers:
+  - Allen-KH Cheng <Allen-KH.Cheng@mediatek.com>
+
+description: |
+  The MTK ADSP mailbox Inter-Processor Communication (IPC) enables the SoC
+  to communicate with ADSP by passing messages through two mailbox channels.
+  The MTK ADSP mailbox IPC also provides the ability for one processor to
+  signal the other processor using interrupts.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8195-adsp-mbox
+      - mediatek,mt8186-adsp-mbox
+
+  "#mbox-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#mbox-cells"
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    adsp_mailbox0:mailbox@10816000 {
+        compatible = "mediatek,mt8195-adsp-mbox";
+        #mbox-cells = <0>;
+        reg = <0x10816000 0x1000>;
+        interrupts = <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH 0>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
deleted file mode 100644
index 89a59b9c81f9..000000000000
--- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt
+++ /dev/null
@@ -1,80 +0,0 @@
-MediaTek GCE
-===============
-
-The Global Command Engine (GCE) is used to help read/write registers with
-critical time limitation, such as updating display configuration during the
-vblank. The GCE can be used to implement the Command Queue (CMDQ) driver.
-
-CMDQ driver uses mailbox framework for communication. Please refer to
-mailbox.txt for generic information about mailbox device-tree bindings.
-
-Required properties:
-- compatible: can be "mediatek,mt8173-gce", "mediatek,mt8183-gce",
-  "mediatek,mt8192-gce", "mediatek,mt8195-gce" or "mediatek,mt6779-gce".
-- reg: Address range of the GCE unit
-- interrupts: The interrupt signal from the GCE block
-- clock: Clocks according to the common clock binding
-- clock-names: Must be "gce" to stand for GCE clock
-- #mbox-cells: Should be 2.
-	<&phandle channel priority>
-	phandle: Label name of a gce node.
-	channel: Channel of mailbox. Be equal to the thread id of GCE.
-	priority: Priority of GCE thread.
-
-Required properties for a client device:
-- mboxes: Client use mailbox to communicate with GCE, it should have this
-  property and list of phandle, mailbox specifiers.
-Optional properties for a client device:
-- mediatek,gce-client-reg: Specify the sub-system id which is corresponding
-  to the register address, it should have this property and list of phandle,
-  sub-system specifiers.
-  <&phandle subsys_number start_offset size>
-  phandle: Label name of a gce node.
-  subsys_number: specify the sub-system id which is corresponding
-                 to the register address.
-  start_offset: the start offset of register address that GCE can access.
-  size: the total size of register address that GCE can access.
-
-Optional properties for a client mutex node:
-- mediatek,gce-events: GCE events used by clients. The event numbers are
-  defined in 'dt-bindings/gce/<chip>-gce.h'.
-
-Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h',
-'dt-binding/gce/mt8183-gce.h', 'dt-binding/gce/mt8192-gce.h',
-'dt-binding/gce/mt8195-gce.h' or 'dt-bindings/gce/mt6779-gce.h'.
-Such as sub-system ids, thread priority, event ids.
-
-Example:
-
-	gce: gce@10212000 {
-		compatible = "mediatek,mt8173-gce";
-		reg = <0 0x10212000 0 0x1000>;
-		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_GCE>;
-		clock-names = "gce";
-		#mbox-cells = <2>;
-	};
-
-Example for a client device:
-
-	mmsys: clock-controller@14000000 {
-		compatible = "mediatek,mt8173-mmsys";
-		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST>,
-			 <&gce 1 CMDQ_THR_PRIO_LOWEST>;
-		mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
-				CMDQ_EVENT_MUTEX1_STREAM_EOF>;
-		mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>,
-					  <&gce SUBSYS_1401XXXX 0x2000 0x100>;
-		...
-	};
-
-Example for a client mutex node:
-	mutex: mutex@14020000 {
-		compatible = "mediatek,mt8173-disp-mutex";
-		reg = <0 0x14020000 0 0x1000>;
-		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
-		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
-		clocks = <&mmsys CLK_MM_MUTEX_32K>;
-		mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
-				      <CMDQ_EVENT_MUTEX1_STREAM_EOF>;
-	};
diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
deleted file mode 100644
index ff3eafc5a882..000000000000
--- a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-NVIDIA Tegra Hardware Synchronization Primitives (HSP)
-
-The HSP modules are used for the processors to share resources and communicate
-together. It provides a set of hardware synchronization primitives for
-interprocessor communication. So the interprocessor communication (IPC)
-protocols can use hardware synchronization primitives, when operating between
-two processors not in an SMP relationship.
-
-The features that HSP supported are shared mailboxes, shared semaphores,
-arbitrated semaphores and doorbells.
-
-Required properties:
-- name : Should be hsp
-- compatible
-    Array of strings.
-    one of:
-    - "nvidia,tegra186-hsp"
-    - "nvidia,tegra194-hsp", "nvidia,tegra186-hsp"
-- reg : Offset and length of the register set for the device.
-- interrupt-names
-    Array of strings.
-    Contains a list of names for the interrupts described by the interrupt
-    property. May contain the following entries, in any order:
-    - "doorbell"
-    - "sharedN", where 'N' is a number from zero up to the number of
-      external interrupts supported by the HSP instance minus one.
-    Users of this binding MUST look up entries in the interrupt property
-    by name, using this interrupt-names property to do so.
-- interrupts
-    Array of interrupt specifiers.
-    Must contain one entry per entry in the interrupt-names property,
-    in a matching order.
-- #mbox-cells : Should be 2.
-
-The mbox specifier of the "mboxes" property in the client node should contain
-two cells. The first cell determines the HSP type and the second cell is used
-to identify the mailbox that the client is going to use.
-
-For doorbells, the second cell specifies the index of the doorbell to use.
-
-For shared mailboxes, the second cell is composed of two fields:
-- bits 31..24:
-    A bit mask of flags that further specify how the shared mailbox will be
-    used. Valid flags are:
-    - bit 31:
-        Defines the direction of the mailbox. If set, the mailbox will be used
-        as a producer (i.e. used to send data). If cleared, the mailbox is the
-        consumer of data sent by a producer.
-
-- bits 23.. 0:
-    The index of the shared mailbox to use. The number of available mailboxes
-    may vary by instance of the HSP block and SoC generation.
-
-The following file contains definitions that can be used to construct mailbox
-specifiers:
-
-    <dt-bindings/mailbox/tegra186-hsp.h>
-
-Example:
-
-hsp_top0: hsp@3c00000 {
-	compatible = "nvidia,tegra186-hsp";
-	reg = <0x0 0x03c00000 0x0 0xa0000>;
-	interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "doorbell";
-	#mbox-cells = <2>;
-};
-
-client {
-	...
-	mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_XXX>;
-};
diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
new file mode 100644
index 000000000000..a3e87516d637
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/nvidia,tegra186-hsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Hardware Synchronization Primitives (HSP)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  The HSP modules are used for the processors to share resources and
+  communicate together. It provides a set of hardware synchronization
+  primitives for interprocessor communication. So the interprocessor
+  communication (IPC) protocols can use hardware synchronization
+  primitives, when operating between two processors not in an SMP
+  relationship.
+
+  The features that HSP supported are shared mailboxes, shared
+  semaphores, arbitrated semaphores and doorbells.
+
+  The mbox specifier of the "mboxes" property in the client node should
+  contain two cells. The first cell determines the HSP type and the
+  second cell is used to identify the mailbox that the client is going
+  to use.
+
+  For shared mailboxes, the first cell composed of two fields:
+    - bits 15..8:
+        A bit mask of flags that further specifies the type of shared
+        mailbox to be used (based on the data size). If no flag is
+        specified then, 32-bit shared mailbox is used.
+    - bits 7..0:
+        Defines the type of the mailbox to be used. This field should be
+        TEGRA_HSP_MBOX_TYPE_SM for shared mailboxes.
+
+  For doorbells, the second cell specifies the index of the doorbell to
+  use.
+
+  For shared mailboxes, the second cell is composed of two fields:
+    - bits 31..24:
+        A bit mask of flags that further specify how the shared mailbox
+        will be used. Valid flags are:
+          - bit 31:
+              Defines the direction of the mailbox. If set, the mailbox
+              will be used as a producer (i.e. used to send data). If
+              cleared, the mailbox is the consumer of data sent by a
+              producer.
+
+    - bits 23..0:
+        The index of the shared mailbox to use. The number of available
+        mailboxes may vary by instance of the HSP block and SoC
+        generation.
+
+    The following file contains definitions that can be used to
+    construct mailbox specifiers:
+
+        <dt-bindings/mailbox/tegra186-hsp.h>
+
+properties:
+  $nodename:
+    pattern: "^hsp@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - const: nvidia,tegra186-hsp
+      - const: nvidia,tegra194-hsp
+      - items:
+          - const: nvidia,tegra234-hsp
+          - const: nvidia,tegra194-hsp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 9
+
+  interrupt-names:
+    oneOf:
+      # shared interrupts are optional
+      - items:
+          - const: doorbell
+
+      - items:
+          - const: doorbell
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+
+      - items:
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+          - pattern: "^shared[0-7]$"
+
+  "#mbox-cells":
+    const: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/tegra186-hsp.h>
+
+    hsp_top0: hsp@3c00000 {
+        compatible = "nvidia,tegra186-hsp";
+        reg = <0x03c00000 0xa0000>;
+        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "doorbell";
+        #mbox-cells = <2>;
+    };
+
+    client {
+        mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_CCPLEX>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
index 6395281b0cec..32d7bbc98cac 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
@@ -1,37 +1,54 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mailbox/qcom,apcs-kpss-global.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mailbox/qcom,apcs-kpss-global.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm APCS global block bindings
+title: Qualcomm APCS global block
 
 description:
   This binding describes the APCS "global" block found in various Qualcomm
   platforms.
 
 maintainers:
-  - Sivaprakash Murugesan <sivaprak@codeaurora.org>
+  - Jassi Brar <jassisinghbrar@gmail.com>
 
 properties:
   compatible:
-    enum:
-      - qcom,ipq6018-apcs-apps-global
-      - qcom,ipq8074-apcs-apps-global
-      - qcom,msm8916-apcs-kpss-global
-      - qcom,msm8939-apcs-kpss-global
-      - qcom,msm8953-apcs-kpss-global
-      - qcom,msm8994-apcs-kpss-global
-      - qcom,msm8996-apcs-hmss-global
-      - qcom,msm8998-apcs-hmss-global
-      - qcom,qcs404-apcs-apps-global
-      - qcom,sc7180-apss-shared
-      - qcom,sc8180x-apss-shared
-      - qcom,sdm660-apcs-hmss-global
-      - qcom,sdm845-apss-shared
-      - qcom,sm6125-apcs-hmss-global
-      - qcom,sm6115-apcs-hmss-global
-      - qcom,sm8150-apss-shared
+    oneOf:
+      - items:
+          - enum:
+              - qcom,ipq5332-apcs-apps-global
+              - qcom,ipq8074-apcs-apps-global
+              - qcom,ipq9574-apcs-apps-global
+          - const: qcom,ipq6018-apcs-apps-global
+      - items:
+          - enum:
+              - qcom,sc7180-apss-shared
+              - qcom,sc8180x-apss-shared
+              - qcom,sm8150-apss-shared
+          - const: qcom,sdm845-apss-shared
+      - items:
+          - enum:
+              - qcom,msm8916-apcs-kpss-global
+              - qcom,msm8939-apcs-kpss-global
+              - qcom,msm8953-apcs-kpss-global
+              - qcom,msm8976-apcs-kpss-global
+              - qcom,msm8994-apcs-kpss-global
+              - qcom,qcs404-apcs-apps-global
+              - qcom,sdx55-apcs-gcc
+          - const: syscon
+      - enum:
+          - qcom,ipq6018-apcs-apps-global
+          - qcom,ipq8074-apcs-apps-global
+          - qcom,msm8996-apcs-hmss-global
+          - qcom,msm8998-apcs-hmss-global
+          - qcom,qcm2290-apcs-hmss-global
+          - qcom,sdm660-apcs-hmss-global
+          - qcom,sdm845-apss-shared
+          - qcom,sm4250-apcs-hmss-global
+          - qcom,sm6115-apcs-hmss-global
+          - qcom,sm6125-apcs-hmss-global
 
   reg:
     maxItems: 1
@@ -39,23 +56,17 @@ properties:
   clocks:
     description: phandles to the parent clocks of the clock driver
     minItems: 2
-    items:
-      - description: primary pll parent of the clock driver
-      - description: auxiliary parent
-      - description: reference clock
+    maxItems: 3
 
   '#mbox-cells':
     const: 1
 
   '#clock-cells':
-    const: 0
+    enum: [0, 1]
 
   clock-names:
     minItems: 2
-    items:
-      - const: pll
-      - const: aux
-      - const: ref
+    maxItems: 3
 
 required:
   - compatible
@@ -69,31 +80,90 @@ allOf:
       properties:
         compatible:
           enum:
-            - qcom,ipq6018-apcs-apps-global
-            - qcom,ipq8074-apcs-apps-global
             - qcom,msm8916-apcs-kpss-global
+            - qcom,msm8939-apcs-kpss-global
+            - qcom,qcs404-apcs-apps-global
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary pll parent of the clock driver
+            - description: auxiliary parent
+        clock-names:
+          items:
+            - const: pll
+            - const: aux
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdx55-apcs-gcc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: reference clock
+            - description: primary pll parent of the clock driver
+            - description: auxiliary parent
+        clock-names:
+          items:
+            - const: ref
+            - const: pll
+            - const: aux
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-apcs-apps-global
+    then:
+      properties:
+        clocks:
+          items:
+            - description: primary pll parent of the clock driver
+            - description: XO clock
+        clock-names:
+          items:
+            - const: pll
+            - const: xo
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,msm8953-apcs-kpss-global
+            - qcom,msm8976-apcs-kpss-global
             - qcom,msm8994-apcs-kpss-global
             - qcom,msm8996-apcs-hmss-global
             - qcom,msm8998-apcs-hmss-global
-            - qcom,qcs404-apcs-apps-global
-            - qcom,sc7180-apss-shared
+            - qcom,qcm2290-apcs-hmss-global
             - qcom,sdm660-apcs-hmss-global
             - qcom,sdm845-apss-shared
+            - qcom,sm4250-apcs-hmss-global
+            - qcom,sm6115-apcs-hmss-global
             - qcom,sm6125-apcs-hmss-global
-            - qcom,sm8150-apss-shared
     then:
       properties:
-        clocks:
-          maxItems: 2
+        clocks: false
+        clock-names: false
+
   - if:
       properties:
         compatible:
-          enum:
-            - qcom,sdx55-apcs-gcc
+          contains:
+            enum:
+              - qcom,ipq6018-apcs-apps-global
     then:
       properties:
-        clocks:
-          maxItems: 3
+        '#clock-cells':
+          const: 1
+    else:
+      properties:
+        '#clock-cells':
+          const: 0
+
 examples:
 
   # Example apcs with msm8996
@@ -104,6 +174,7 @@ examples:
         reg = <0x9820000 0x1000>;
 
         #mbox-cells = <1>;
+        #clock-cells = <0>;
     };
 
     rpm-glink {
@@ -111,7 +182,6 @@ examples:
         interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
         qcom,rpm-msg-ram = <&rpm_msg_ram>;
         mboxes = <&apcs_glb 0>;
-        mbox-names = "rpm_hlos";
     };
 
   # Example apcs with qcs404
@@ -119,7 +189,7 @@ examples:
     #define GCC_APSS_AHB_CLK_SRC  1
     #define GCC_GPLL0_AO_OUT_MAIN 123
     apcs: mailbox@b011000 {
-        compatible = "qcom,qcs404-apcs-apps-global";
+        compatible = "qcom,qcs404-apcs-apps-global", "syscon";
         reg = <0x0b011000 0x1000>;
         #mbox-cells = <1>;
         clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>;
diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
index 866efb278813..cc6f66eccc84 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
+++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml
@@ -24,10 +24,16 @@ properties:
   compatible:
     items:
       - enum:
+          - qcom,qdu1000-ipcc
+          - qcom,sa8775p-ipcc
+          - qcom,sc7280-ipcc
+          - qcom,sc8280xp-ipcc
           - qcom,sm6350-ipcc
+          - qcom,sm6375-ipcc
           - qcom,sm8250-ipcc
           - qcom,sm8350-ipcc
-          - qcom,sc7280-ipcc
+          - qcom,sm8450-ipcc
+          - qcom,sm8550-ipcc
       - const: qcom,ipcc
 
   reg:
@@ -61,23 +67,14 @@ additionalProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/mailbox/qcom-ipcc.h>
-
-        mailbox@408000 {
-                compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
-                reg = <0x408000 0x1000>;
-                interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
-                interrupt-controller;
-                #interrupt-cells = <3>;
-                #mbox-cells = <2>;
-        };
-
-        smp2p-modem {
-                compatible = "qcom,smp2p";
-                interrupts-extended = <&ipcc_mproc IPCC_CLIENT_MPSS
-                                IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>;
-                mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>;
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
 
-                /* Other SMP2P fields */
-        };
+    mailbox@408000 {
+        compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
+        reg = <0x408000 0x1000>;
+        interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <3>;
+        #mbox-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml
index 80feba82cbd6..b526f9c0c272 100644
--- a/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mailbox/sprd-mailbox.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mailbox/sprd-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Spreadtrum mailbox controller bindings
+title: Spreadtrum mailbox controller
 
 maintainers:
   - Orson Zhai <orsonzhai@gmail.com>
diff --git a/Documentation/devicetree/bindings/mailbox/st,sti-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/st,sti-mailbox.yaml
new file mode 100644
index 000000000000..a023c28dff49
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/st,sti-mailbox.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/st,sti-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics Mailbox Driver for STi platform
+
+description:
+  Each ST Mailbox IP currently consists of 4 instances of 32 channels.
+  Messages are passed between Application and Remote processors using
+  shared memory.
+
+maintainers:
+  - Patrice Chotard <patrice.chotard@foss.st.com>
+
+properties:
+  compatible:
+    const: st,stih407-mailbox
+
+  reg:
+    maxItems: 1
+
+  mbox-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: name of the mailbox IP
+
+  interrupts:
+    description: the irq line for the RX mailbox
+    maxItems: 1
+
+  "#mbox-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - "#mbox-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mailbox0: mailbox@8f00000  {
+        compatible = "st,stih407-mailbox";
+        reg = <0x8f00000 0x1000>;
+        interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+        #mbox-cells = <2>;
+        mbox-name = "a9";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
index b15da9ba90b2..134fd223a02b 100644
--- a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
+++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mailbox/st,stm32-ipcc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mailbox/st,stm32-ipcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 IPC controller bindings
+title: STMicroelectronics STM32 IPC controller
 
 description:
   The IPCC block provides a non blocking signaling mechanism to post and
@@ -13,8 +13,8 @@ description:
   channels (N) can be read from a dedicated register.
 
 maintainers:
-  - Fabien Dessenne <fabien.dessenne@st.com>
-  - Arnaud Pouliquen <arnaud.pouliquen@st.com>
+  - Fabien Dessenne <fabien.dessenne@foss.st.com>
+  - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
 
 properties:
   compatible:
@@ -30,15 +30,11 @@ properties:
     items:
       - description: rx channel occupied
       - description: tx channel free
-      - description: wakeup source
-    minItems: 2
 
   interrupt-names:
     items:
       - const: rx
       - const: tx
-      - const: wakeup
-    minItems: 2
 
   wakeup-source: true
 
@@ -70,10 +66,9 @@ examples:
       #mbox-cells = <1>;
       reg = <0x4c001000 0x400>;
       st,proc-id = <0>;
-      interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>,
-      		      <&intc GIC_SPI 101 IRQ_TYPE_NONE>,
-      		      <&aiec 62 1>;
-      interrupt-names = "rx", "tx", "wakeup";
+      interrupts-extended = <&exti 61 1>,
+                            <&intc GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "rx", "tx";
       clocks = <&rcc_clk IPCC>;
       wakeup-source;
     };
diff --git a/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt b/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt
deleted file mode 100644
index 351f612673fc..000000000000
--- a/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-ST Microelectronics Mailbox Driver
-
-Each ST Mailbox IP currently consists of 4 instances of 32 channels.  Messages
-are passed between Application and Remote processors using shared memory.
-
-Controller
-----------
-
-Required properties:
-- compatible		: Should be "st,stih407-mailbox"
-- reg			: Offset and length of the device's register set
-- mbox-name		: Name of the mailbox
-- #mbox-cells:		: Must be 2
-			  <&phandle instance channel direction>
-			    phandle   : Label name of controller
-			    instance  : Instance number
-			    channel   : Channel number
-
-Optional properties
-- interrupts		: Contains the IRQ line for a Rx mailbox
-
-Example:
-
-mailbox0: mailbox@0  {
-	compatible	= "st,stih407-mailbox";
-	reg		= <0x08f00000 0x1000>;
-	interrupts	= <GIC_SPI 1 IRQ_TYPE_NONE>;
-	#mbox-cells	= <2>;
-	mbox-name	= "a9";
-};
-
-Client
-------
-
-Required properties:
-- compatible		: Many (See the client docs)
-- reg			: Shared (between Application and Remote) memory address
-- mboxes		: Standard property to specify a Mailbox (See ./mailbox.txt)
-			  Cells must match 'mbox-cells' (See Controller docs above)
-
-Optional properties
-- mbox-names		: Name given to channels seen in the 'mboxes' property.
-
-Example:
-
-mailbox_test {
-	compatible	= "mailbox-test";
-	reg		= <0x[shared_memory_address], [shared_memory_size]>;
-	mboxes		= <&mailbox2 0 1>, <&mailbox0 2 1>;
-	mbox-names	= "tx",	"rx";
-};
diff --git a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
index e864d798168d..d433e496ec6e 100644
--- a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
@@ -180,15 +180,6 @@ allOf:
         compatible:
           enum:
             - ti,am654-mailbox
-    then:
-      required:
-        - interrupt-parent
-
-  - if:
-      properties:
-        compatible:
-          enum:
-            - ti,am654-mailbox
             - ti,am64-mailbox
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
deleted file mode 100644
index ad76edccf881..000000000000
--- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
+++ /dev/null
@@ -1,127 +0,0 @@
-Xilinx IPI Mailbox Controller
-========================================
-
-The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
-messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
-agent owns registers used for notification and buffers for message.
-
-               +-------------------------------------+
-               | Xilinx ZynqMP IPI Controller        |
-               +-------------------------------------+
-    +--------------------------------------------------+
-ATF                    |                     |
-                       |                     |
-                       |                     |
-    +--------------------------+             |
-                       |                     |
-                       |                     |
-    +--------------------------------------------------+
-            +------------------------------------------+
-            |  +----------------+   +----------------+ |
-Hardware    |  |  IPI Agent     |   |  IPI Buffers   | |
-            |  |  Registers     |   |                | |
-            |  |                |   |                | |
-            |  +----------------+   +----------------+ |
-            |                                          |
-            | Xilinx IPI Agent Block                   |
-            +------------------------------------------+
-
-
-Controller Device Node:
-===========================
-Required properties:
---------------------
-IPI agent node:
-- compatible:		Shall be: "xlnx,zynqmp-ipi-mailbox"
-- interrupt-parent:	Phandle for the interrupt controller
-- interrupts:		Interrupt information corresponding to the
-			interrupt-names property.
-- xlnx,ipi-id:		local Xilinx IPI agent ID
-- #address-cells:	number of address cells of internal IPI mailbox nodes
-- #size-cells:		number of size cells of internal IPI mailbox nodes
-
-Internal IPI mailbox node:
-- reg:			IPI buffers address ranges
-- reg-names:		Names of the reg resources. It should have:
-			* local_request_region
-			  - IPI request msg buffer written by local and read
-			    by remote
-			* local_response_region
-			  - IPI response msg buffer written by local and read
-			    by remote
-			* remote_request_region
-			  - IPI request msg buffer written by remote and read
-			    by local
-			* remote_response_region
-			  - IPI response msg buffer written by remote and read
-			    by local
-- #mbox-cells:		Shall be 1. It contains:
-			* tx(0) or rx(1) channel
-- xlnx,ipi-id:		remote Xilinx IPI agent ID of which the mailbox is
-			connected to.
-
-Optional properties:
---------------------
-- method:              The method of accessing the IPI agent registers.
-                       Permitted values are: "smc" and "hvc". Default is
-                       "smc".
-
-Client Device Node:
-===========================
-Required properties:
---------------------
-- mboxes:		Standard property to specify a mailbox
-			(See ./mailbox.txt)
-- mbox-names:		List of identifier  strings for each mailbox
-			channel.
-
-Example:
-===========================
-	zynqmp_ipi {
-		compatible = "xlnx,zynqmp-ipi-mailbox";
-		interrupt-parent = <&gic>;
-		interrupts = <0 29 4>;
-		xlnx,ipi-id = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/* APU<->RPU0 IPI mailbox controller */
-		ipi_mailbox_rpu0: mailbox@ff990400 {
-			reg = <0xff990400 0x20>,
-			      <0xff990420 0x20>,
-			      <0xff990080 0x20>,
-			      <0xff9900a0 0x20>;
-			reg-names = "local_request_region",
-				    "local_response_region",
-				    "remote_request_region",
-				    "remote_response_region";
-			#mbox-cells = <1>;
-			xlnx,ipi-id = <1>;
-		};
-		/* APU<->RPU1 IPI mailbox controller */
-		ipi_mailbox_rpu1: mailbox@ff990440 {
-			reg = <0xff990440 0x20>,
-			      <0xff990460 0x20>,
-			      <0xff990280 0x20>,
-			      <0xff9902a0 0x20>;
-			reg-names = "local_request_region",
-				    "local_response_region",
-				    "remote_request_region",
-				    "remote_response_region";
-			#mbox-cells = <1>;
-			xlnx,ipi-id = <2>;
-		};
-	};
-	rpu0 {
-		...
-		mboxes = <&ipi_mailbox_rpu0 0>,
-			 <&ipi_mailbox_rpu0 1>;
-		mbox-names = "tx", "rx";
-	};
-	rpu1 {
-		...
-		mboxes = <&ipi_mailbox_rpu1 0>,
-			 <&ipi_mailbox_rpu1 1>;
-		mbox-names = "tx", "rx";
-	};
diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
new file mode 100644
index 000000000000..374ffe64016f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/xlnx,zynqmp-ipi-mailbox.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx IPI(Inter Processor Interrupt) mailbox controller
+
+description: |
+  The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
+  messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
+  agent owns registers used for notification and buffers for message.
+
+               +-------------------------------------+
+               | Xilinx ZynqMP IPI Controller        |
+               +-------------------------------------+
+    +--------------------------------------------------+
+  TF-A                   |                     |
+                         |                     |
+                         |                     |
+    +--------------------------+               |
+                         |                     |
+                         |                     |
+    +--------------------------------------------------+
+              +------------------------------------------+
+              |  +----------------+   +----------------+ |
+  Hardware    |  |  IPI Agent     |   |  IPI Buffers   | |
+              |  |  Registers     |   |                | |
+              |  |                |   |                | |
+              |  +----------------+   +----------------+ |
+              |                                          |
+              | Xilinx IPI Agent Block                   |
+              +------------------------------------------+
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-ipi-mailbox
+
+  method:
+    description: |
+      The method of calling the PM-API firmware layer.
+      Permitted values are.
+      - "smc" : SMC #0, following the SMCCC
+      - "hvc" : HVC #0, following the SMCCC
+
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - smc
+      - hvc
+    default: smc
+
+  '#address-cells':
+    const: 2
+
+  '#size-cells':
+    const: 2
+
+  xlnx,ipi-id:
+    description: |
+      Remote Xilinx IPI agent ID of which the mailbox is connected to.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  interrupts:
+    maxItems: 1
+
+  ranges: true
+
+patternProperties:
+  '^mailbox@[0-9a-f]+$':
+    description: Internal ipi mailbox node
+    type: object  # DT nodes are json objects
+    additionalProperties: false
+    properties:
+      xlnx,ipi-id:
+        description:
+          Remote Xilinx IPI agent ID of which the mailbox is connected to.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      '#mbox-cells':
+        const: 1
+        description:
+          It contains tx(0) or rx(1) channel IPI id number.
+
+      reg:
+        maxItems: 4
+
+      reg-names:
+        items:
+          - const: local_request_region
+          - const: local_response_region
+          - const: remote_request_region
+          - const: remote_response_region
+
+    required:
+      - reg
+      - reg-names
+      - "#mbox-cells"
+
+additionalProperties: false
+
+required:
+  - compatible
+  - interrupts
+  - '#address-cells'
+  - '#size-cells'
+  - xlnx,ipi-id
+
+examples:
+  - |
+    #include<dt-bindings/interrupt-controller/arm-gic.h>
+
+    amba {
+      #address-cells = <0x2>;
+      #size-cells = <0x2>;
+      zynqmp-mailbox {
+        compatible = "xlnx,zynqmp-ipi-mailbox";
+        interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+        xlnx,ipi-id = <0>;
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges;
+
+        mailbox: mailbox@ff9905c0 {
+          reg = <0x0 0xff9905c0 0x0 0x20>,
+                <0x0 0xff9905e0 0x0 0x20>,
+                <0x0 0xff990e80 0x0 0x20>,
+                <0x0 0xff990ea0 0x0 0x20>;
+          reg-names = "local_request_region",
+                      "local_response_region",
+                      "remote_request_region",
+                      "remote_response_region";
+          #mbox-cells = <1>;
+          xlnx,ipi-id = <4>;
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allegro,al5e.yaml b/Documentation/devicetree/bindings/media/allegro,al5e.yaml
index 135bea94b587..2899d26d690e 100644
--- a/Documentation/devicetree/bindings/media/allegro,al5e.yaml
+++ b/Documentation/devicetree/bindings/media/allegro,al5e.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allegro,al5e.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allegro DVT Video IP Codecs Device Tree Bindings
+title: Allegro DVT Video IP Codecs
 
 maintainers:
   - Michael Tretter <m.tretter@pengutronix.de>
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
index 6ced94064215..617264ce477d 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-csi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings
+title: Allwinner A10 CMOS Sensor Interface (CSI)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
index 6d8395d6bca0..42dfe22ad5f1 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-ir.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Infrared Controller Device Tree Bindings
+title: Allwinner A10 Infrared Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
 allOf:
-  - $ref: "rc.yaml#"
+  - $ref: rc.yaml#
 
 properties:
   compatible:
@@ -21,6 +21,7 @@ properties:
       - const: allwinner,sun6i-a31-ir
       - items:
           - enum:
+              - allwinner,suniv-f1c100s-ir
               - allwinner,sun8i-a83t-ir
               - allwinner,sun8i-r40-ir
               - allwinner,sun50i-a64-ir
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
index c34303b87a5b..541325f900a1 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun4i-a10-video-engine.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Video Engine Device Tree Bindings
+title: Allwinner A10 Video Engine
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -20,6 +20,7 @@ properties:
       - allwinner,sun8i-h3-video-engine
       - allwinner,sun8i-v3s-video-engine
       - allwinner,sun8i-r40-video-engine
+      - allwinner,sun20i-d1-video-engine
       - allwinner,sun50i-a64-video-engine
       - allwinner,sun50i-h5-video-engine
       - allwinner,sun50i-h6-video-engine
@@ -47,6 +48,10 @@ properties:
 
   allwinner,sram:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
     description: Phandle to the device SRAM
 
   iommus:
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml
new file mode 100644
index 000000000000..a4f06bbdfe49
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun50i-h6-vpu-g2.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun50i-h6-vpu-g2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hantro G2 VPU codec implemented on Allwinner H6 SoC
+
+maintainers:
+  - Jernej Skrabec <jernej.skrabec@gmail.com>
+
+description:
+  Hantro G2 video decode accelerator present on Allwinner H6 SoC.
+
+properties:
+  compatible:
+    const: allwinner,sun50i-h6-vpu-g2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  resets:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun50i-h6-ccu.h>
+    #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+    video-codec-g2@1c00000 {
+        compatible = "allwinner,sun50i-h6-vpu-g2";
+        reg = <0x01c00000 0x1000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
+        clock-names = "bus", "mod";
+        resets = <&ccu RST_BUS_VP9>;
+        iommus = <&iommu 5>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
index 8b568072a069..b3d6db922693 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-csi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-csi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 CMOS Sensor Interface (CSI) Device Tree Bindings
+title: Allwinner A31 CMOS Sensor Interface (CSI)
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -42,6 +42,7 @@ properties:
 
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
+    description: Parallel input port, connect to a parallel sensor
 
     properties:
       endpoint:
@@ -59,7 +60,28 @@ properties:
         required:
           - bus-width
 
-    additionalProperties: false
+    unevaluatedProperties: false
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: "#/properties/port"
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: MIPI CSI-2 bridge input port
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Internal output port to the ISP
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
 
 required:
   - compatible
@@ -69,6 +91,12 @@ required:
   - clock-names
   - resets
 
+oneOf:
+  - required:
+      - ports
+  - required:
+      - port
+
 additionalProperties: false
 
 examples:
@@ -89,19 +117,25 @@ examples:
                       "ram";
         resets = <&ccu RST_BUS_CSI>;
 
-        port {
-            /* Parallel bus endpoint */
-            csi1_ep: endpoint {
-                remote-endpoint = <&adv7611_ep>;
-                bus-width = <16>;
-
-                /*
-                 * If hsync-active/vsync-active are missing,
-                 * embedded BT.656 sync is used.
-                 */
-                 hsync-active = <0>; /* Active low */
-                 vsync-active = <0>; /* Active low */
-                 pclk-sample = <1>;  /* Rising */
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                /* Parallel bus endpoint */
+                csi1_ep: endpoint {
+                    remote-endpoint = <&adv7611_ep>;
+                    bus-width = <16>;
+
+                    /*
+                     * If hsync-active/vsync-active are missing,
+                     * embedded BT.656 sync is used.
+                     */
+                    hsync-active = <0>; /* Active low */
+                    vsync-active = <0>; /* Active low */
+                    pclk-sample = <1>;  /* Rising */
+                };
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
new file mode 100644
index 000000000000..a61a76bb611c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-isp.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-isp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 Image Signal Processor Driver (ISP)
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - allwinner,sun6i-a31-isp
+      - allwinner,sun8i-v3s-isp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: DRAM Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+      - const: ram
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: CSI0 input port
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: CSI1 input port
+
+    if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun8i-v3s-isp
+    then:
+      required:
+        - port@0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+    isp: isp@1cb8000 {
+        compatible = "allwinner,sun8i-v3s-isp";
+        reg = <0x01cb8000 0x1000>;
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+             <&ccu CLK_CSI1_SCLK>,
+             <&ccu CLK_DRAM_CSI>;
+        clock-names = "bus", "mod", "ram";
+        resets = <&ccu RST_BUS_CSI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                isp_in_csi0: endpoint {
+                    remote-endpoint = <&csi0_out_isp>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
new file mode 100644
index 000000000000..54e15ab8a7f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A31 MIPI CSI-2
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: allwinner,sun6i-a31-mipi-csi2
+      - items:
+          - const: allwinner,sun8i-v3s-mipi-csi2
+          - const: allwinner,sun6i-a31-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+
+  phys:
+    maxItems: 1
+    description: MIPI D-PHY
+
+  phy-names:
+    items:
+      - const: dphy
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Input port, connect to a MIPI CSI-2 sensor
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port, connect to a CSI controller
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-v3s-ccu.h>
+    #include <dt-bindings/reset/sun8i-v3s-ccu.h>
+
+    mipi_csi2: csi@1cb1000 {
+        compatible = "allwinner,sun8i-v3s-mipi-csi2",
+                     "allwinner,sun6i-a31-mipi-csi2";
+        reg = <0x01cb1000 0x1000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+                 <&ccu CLK_CSI1_SCLK>;
+        clock-names = "bus", "mod";
+        resets = <&ccu RST_BUS_CSI>;
+
+        phys = <&dphy>;
+        phy-names = "dphy";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mipi_csi2_in: port@0 {
+                reg = <0>;
+
+                mipi_csi2_in_ov5648: endpoint {
+                    data-lanes = <1 2 3 4>;
+
+                    remote-endpoint = <&ov5648_out_mipi_csi2>;
+                };
+            };
+
+            mipi_csi2_out: port@1 {
+                reg = <1>;
+
+                mipi_csi2_out_csi0: endpoint {
+                    remote-endpoint = <&csi0_in_mipi_csi2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
index a258832d520c..c2f292dd01ed 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-de2-rotate.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83T DE2 Rotate Device Tree Bindings
+title: Allwinner A83T DE2 Rotate
 
 maintainers:
   - Jernej Skrabec <jernej.skrabec@siol.net>
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
new file mode 100644
index 000000000000..3cac68a87ad7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/allwinner,sun8i-a83t-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A83T MIPI CSI-2
+
+maintainers:
+  - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
+
+properties:
+  compatible:
+    const: allwinner,sun8i-a83t-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Bus Clock
+      - description: Module Clock
+      - description: MIPI-specific Clock
+      - description: Misc CSI Clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: mod
+      - const: mipi
+      - const: misc
+
+  resets:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Input port, connect to a MIPI CSI-2 sensor
+
+        properties:
+          reg:
+            const: 0
+
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - data-lanes
+
+        unevaluatedProperties: false
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Output port, connect to a CSI controller
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun8i-a83t-ccu.h>
+    #include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
+    mipi_csi2: csi@1cb1000 {
+        compatible = "allwinner,sun8i-a83t-mipi-csi2";
+        reg = <0x01cb1000 0x1000>;
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CSI>,
+                 <&ccu CLK_CSI_SCLK>,
+                 <&ccu CLK_MIPI_CSI>,
+                 <&ccu CLK_CSI_MISC>;
+        clock-names = "bus", "mod", "mipi", "misc";
+        resets = <&ccu RST_BUS_CSI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mipi_csi2_in: port@0 {
+                reg = <0>;
+
+                mipi_csi2_in_ov8865: endpoint {
+                    data-lanes = <1 2 3 4>;
+
+                    remote-endpoint = <&ov8865_out_mipi_csi2>;
+                };
+            };
+
+            mipi_csi2_out: port@1 {
+                reg = <1>;
+
+                mipi_csi2_out_csi: endpoint {
+                    remote-endpoint = <&csi_in_mipi_csi2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
index b80980b1908e..3ccd52164f5b 100644
--- a/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
+++ b/Documentation/devicetree/bindings/media/allwinner,sun8i-h3-deinterlace.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/allwinner,sun8i-h3-deinterlace.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner H3 Deinterlace Device Tree Bindings
+title: Allwinner H3 Deinterlace
 
 maintainers:
   - Jernej Skrabec <jernej.skrabec@siol.net>
diff --git a/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
index bee93bd84771..f23fa6d06ad0 100644
--- a/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
@@ -2,13 +2,13 @@
 # Copyright 2020 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/amlogic,axg-ge2d.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/amlogic,axg-ge2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic GE2D Acceleration Unit
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
index 5044c4bb94e0..55930f6107c9 100644
--- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
@@ -2,13 +2,13 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/amlogic,gx-vdec.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/amlogic,gx-vdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Video Decoder
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Maxime Jourdan <mjourdan@baylibre.com>
 
 description: |
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml
index 4432fea32650..377acce93423 100644
--- a/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml
@@ -2,8 +2,8 @@
 
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/amlogic,meson-ir-tx.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/amlogic,meson-ir-tx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson IR transmitter
 
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml
new file mode 100644
index 000000000000..3f9fa92703bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,meson6-ir.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amlogic,meson6-ir.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson IR remote control receiver
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: rc.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - amlogic,meson6-ir
+          - amlogic,meson8b-ir
+          - amlogic,meson-gxbb-ir
+      - items:
+          - const: amlogic,meson-gx-ir
+          - const: amlogic,meson-gxbb-ir
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    ir-receiver@c8100480 {
+        compatible = "amlogic,meson6-ir";
+        reg = <0xc8100480 0x20>;
+        interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
+    };
diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
new file mode 100644
index 000000000000..a9d80eaeeeb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amphion,vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amphion VPU codec IP
+
+maintainers:
+  - Ming Qian <ming.qian@nxp.com>
+  - Shijie Qin <shijie.qin@nxp.com>
+
+description: |-
+  The Amphion MXC video encoder(Windsor) and decoder(Malone) accelerators present
+  on NXP i.MX8Q SoCs.
+
+properties:
+  $nodename:
+    pattern: "^vpu@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - nxp,imx8qm-vpu
+          - nxp,imx8qxp-vpu
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^mailbox@[0-9a-f]+$":
+    description:
+      Each vpu encoder or decoder correspond a MU, which used for communication
+      between driver and firmware. Implement via mailbox on driver.
+    $ref: ../mailbox/fsl,mu.yaml#
+
+
+  "^vpu_core@[0-9a-f]+$":
+    description:
+      Each core correspond a decoder or encoder, need to configure them
+      separately. NXP i.MX8QM SoC has one decoder and two encoder, i.MX8QXP SoC
+      has one decoder and one encoder.
+    type: object
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - nxp,imx8q-vpu-decoder
+              - nxp,imx8q-vpu-encoder
+
+      reg:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+      mbox-names:
+        items:
+          - const: tx0
+          - const: tx1
+          - const: rx
+
+      mboxes:
+        description:
+          List of phandle of 2 MU channels for tx, 1 MU channel for rx.
+        maxItems: 3
+
+      memory-region:
+        description:
+          Phandle to the reserved memory nodes to be associated with the
+          remoteproc device. The reserved memory nodes should be carveout nodes,
+          and should be defined as per the bindings in
+          Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+        items:
+          - description: region reserved for firmware image sections.
+          - description: region used for RPC shared memory between firmware and
+                         driver.
+
+    required:
+      - compatible
+      - reg
+      - power-domains
+      - mbox-names
+      - mboxes
+      - memory-region
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  # Device node example for i.MX8QM platform:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+
+    vpu: vpu@2c000000 {
+      compatible = "nxp,imx8qm-vpu";
+      ranges = <0x2c000000 0x2c000000 0x2000000>;
+      reg = <0x2c000000 0x1000000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      power-domains = <&pd IMX_SC_R_VPU>;
+
+      mu_m0: mailbox@2d000000 {
+        compatible = "fsl,imx6sx-mu";
+        reg = <0x2d000000 0x20000>;
+        interrupts = <0 472 4>;
+        #mbox-cells = <2>;
+        power-domains = <&pd IMX_SC_R_VPU_MU_0>;
+      };
+
+      mu1_m0: mailbox@2d020000 {
+        compatible = "fsl,imx6sx-mu";
+        reg = <0x2d020000 0x20000>;
+        interrupts = <0 473 4>;
+        #mbox-cells = <2>;
+        power-domains = <&pd IMX_SC_R_VPU_MU_1>;
+      };
+
+      mu2_m0: mailbox@2d040000 {
+        compatible = "fsl,imx6sx-mu";
+        reg = <0x2d040000 0x20000>;
+        interrupts = <0 474 4>;
+        #mbox-cells = <2>;
+        power-domains = <&pd IMX_SC_R_VPU_MU_2>;
+      };
+
+      vpu_core0: vpu_core@2d080000 {
+        compatible = "nxp,imx8q-vpu-decoder";
+        reg = <0x2d080000 0x10000>;
+        power-domains = <&pd IMX_SC_R_VPU_DEC_0>;
+        mbox-names = "tx0", "tx1", "rx";
+        mboxes = <&mu_m0 0 0>,
+                 <&mu_m0 0 1>,
+                 <&mu_m0 1 0>;
+        memory-region = <&decoder_boot>, <&decoder_rpc>;
+      };
+
+      vpu_core1: vpu_core@2d090000 {
+        compatible = "nxp,imx8q-vpu-encoder";
+        reg = <0x2d090000 0x10000>;
+        power-domains = <&pd IMX_SC_R_VPU_ENC_0>;
+        mbox-names = "tx0", "tx1", "rx";
+        mboxes = <&mu1_m0 0 0>,
+                 <&mu1_m0 0 1>,
+                 <&mu1_m0 1 0>;
+        memory-region = <&encoder1_boot>, <&encoder1_rpc>;
+      };
+
+      vpu_core2: vpu_core@2d0a0000 {
+        reg = <0x2d0a0000 0x10000>;
+        compatible = "nxp,imx8q-vpu-encoder";
+        power-domains = <&pd IMX_SC_R_VPU_ENC_1>;
+        mbox-names = "tx0", "tx1", "rx";
+        mboxes = <&mu2_m0 0 0>,
+                 <&mu2_m0 0 1>,
+                 <&mu2_m0 1 0>;
+        memory-region = <&encoder2_boot>, <&encoder2_rpc>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/atmel,isc.yaml b/Documentation/devicetree/bindings/media/atmel,isc.yaml
index cd6d7af0c768..dc8aba698d78 100644
--- a/Documentation/devicetree/bindings/media/atmel,isc.yaml
+++ b/Documentation/devicetree/bindings/media/atmel,isc.yaml
@@ -45,7 +45,7 @@ properties:
 
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
-    unevaluatedProperties: false
+    additionalProperties: false
     description:
       Input port node, single endpoint describing the input pad.
 
@@ -77,8 +77,6 @@ properties:
 
         additionalProperties: false
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt
deleted file mode 100644
index 47e8d73d32a3..000000000000
--- a/Documentation/devicetree/bindings/media/cec-gpio.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* HDMI CEC GPIO driver
-
-The HDMI CEC GPIO module supports CEC implementations where the CEC line
-is hooked up to a pull-up GPIO line and - optionally - the HPD line is
-hooked up to another GPIO line.
-
-Please note: the maximum voltage for the CEC line is 3.63V, for the HPD and
-5V lines it is 5.3V. So you may need some sort of level conversion circuitry
-when connecting them to a GPIO line.
-
-Required properties:
-  - compatible: value must be "cec-gpio".
-  - cec-gpios: gpio that the CEC line is connected to. The line should be
-    tagged as open drain.
-
-If the CEC line is associated with an HDMI receiver/transmitter, then the
-following property is also required:
-
-  - hdmi-phandle - phandle to the HDMI controller, see also cec.txt.
-
-If the CEC line is not associated with an HDMI receiver/transmitter, then
-the following property is optional and can be used for debugging HPD changes:
-
-  - hpd-gpios: gpio that the HPD line is connected to.
-
-This property is optional and can be used for debugging changes on the 5V line:
-
-  - v5-gpios: gpio that the 5V line is connected to.
-
-Example for the Raspberry Pi 3 where the CEC line is connected to
-pin 26 aka BCM7 aka CE1 on the GPIO pin header, the HPD line is
-connected to pin 11 aka BCM17 and the 5V line is connected to pin
-15 aka BCM22 (some level shifter is needed for the HPD and 5V lines!):
-
-#include <dt-bindings/gpio/gpio.h>
-
-cec-gpio {
-	compatible = "cec-gpio";
-	cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
-	hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-	v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/media/cec.txt b/Documentation/devicetree/bindings/media/cec.txt
deleted file mode 100644
index 22d7aae3d3d7..000000000000
--- a/Documentation/devicetree/bindings/media/cec.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Common bindings for HDMI CEC adapters
-
-- hdmi-phandle: phandle to the HDMI controller.
-
-- needs-hpd: if present the CEC support is only available when the HPD
-  is high. Some boards only let the CEC pin through if the HPD is high,
-  for example if there is a level converter that uses the HPD to power
-  up or down.
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
index d93aea6a0258..b1fab53418f9 100644
--- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+++ b/Documentation/devicetree/bindings/media/cec/amlogic,meson-gx-ao-cec.yaml
@@ -2,13 +2,13 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/amlogic,meson-gx-ao-cec.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/cec/amlogic,meson-gx-ao-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson AO-CEC Controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is
@@ -33,11 +33,8 @@ properties:
   interrupts:
     maxItems: 1
 
-  hdmi-phandle:
-    description: phandle to the HDMI controller
-    $ref: /schemas/types.yaml#/definitions/phandle
-
 allOf:
+  - $ref: cec-common.yaml#
   - if:
       properties:
         compatible:
@@ -81,7 +78,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/media/cec/cec-common.yaml b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
new file mode 100644
index 000000000000..af6ee5f1c73f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/cec-common.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/cec-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDMI CEC Adapters Common Properties
+
+maintainers:
+  - Hans Verkuil <hverkuil@xs4all.nl>
+
+properties:
+  $nodename:
+    pattern: "^cec(@[0-9a-f]+|-[0-9]+)?$"
+
+  hdmi-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the HDMI controller.
+
+  needs-hpd:
+    type: boolean
+    description:
+      The CEC support is only available when the HPD is high. Some boards only
+      let the CEC pin through if the HPD is high, for example if there is a
+      level converter that uses the HPD to power up or down.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
new file mode 100644
index 000000000000..64d7ec057672
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/cec-gpio.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/cec-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HDMI CEC GPIO
+
+maintainers:
+  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
+
+description: |
+  The HDMI CEC GPIO module supports CEC implementations where the CEC line is
+  hooked up to a pull-up GPIO line and - optionally - the HPD line is hooked up
+  to another GPIO line.
+
+  Please note:: the maximum voltage for the CEC line is 3.63V, for the HPD and
+  5V lines it is 5.3V. So you may need some sort of level conversion
+  circuitry when connecting them to a GPIO line.
+
+properties:
+  compatible:
+    const: cec-gpio
+
+  cec-gpios:
+    maxItems: 1
+    description:
+      GPIO that the CEC line is connected to. The line should be tagged as open
+      drain.
+
+  hpd-gpios:
+    maxItems: 1
+    description:
+      GPIO that the HPD line is connected to.  Used for debugging HPD changes
+      when the CEC line is not associated with an HDMI receiver/transmitter.
+
+  v5-gpios:
+    maxItems: 1
+    description:
+      GPIO that the 5V line is connected to.  Used for debugging changes on the
+      5V line.
+
+required:
+  - compatible
+  - cec-gpios
+
+allOf:
+  - $ref: cec-common.yaml#
+  - if:
+      required:
+        - hdmi-phandle
+    then:
+      properties:
+        hpd-gpios: false
+
+  - if:
+      required:
+        - hpd-gpios
+    then:
+      properties:
+        hdmi-phandle: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    cec {
+        compatible = "cec-gpio";
+        cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+        hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+        v5-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml b/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml
new file mode 100644
index 000000000000..369c48fd9bf9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/nvidia,tegra114-cec.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/nvidia,tegra114-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra HDMI CEC
+
+maintainers:
+  - Hans Verkuil <hverkuil-cisco@xs4all.nl>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra114-cec
+      - nvidia,tegra124-cec
+      - nvidia,tegra210-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cec
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - hdmi-phandle
+  - interrupts
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra124-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cec@70015000 {
+        compatible = "nvidia,tegra124-cec";
+        reg = <0x70015000 0x00001000>;
+        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA124_CLK_CEC>;
+        clock-names = "cec";
+        status = "disabled";
+        hdmi-phandle = <&hdmi>;
+    };
diff --git a/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
new file mode 100644
index 000000000000..016c8a77c1a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/samsung,s5p-cec.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/samsung,s5p-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 and Exynos HDMI CEC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Marek Szyprowski <m.szyprowski@samsung.com>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    const: samsung,s5p-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: hdmicec
+
+  interrupts:
+    maxItems: 1
+
+  samsung,syscon-phandle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to PMU system controller interface
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - hdmi-phandle
+  - interrupts
+  - samsung,syscon-phandle
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cec@101b0000 {
+        compatible = "samsung,s5p-cec";
+        reg = <0x101B0000 0x200>;
+
+        clocks = <&clock CLK_HDMI_CEC>;
+        clock-names = "hdmicec";
+        interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+        hdmi-phandle = <&hdmi>;
+        needs-hpd;
+        pinctrl-names = "default";
+        pinctrl-0 = <&hdmi_cec>;
+        samsung,syscon-phandle = <&pmu_system_controller>;
+    };
diff --git a/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
new file mode 100644
index 000000000000..aeddf16ed339
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/cec/st,stih-cec.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/cec/st,stih-cec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STIH4xx HDMI CEC
+
+maintainers:
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+allOf:
+  - $ref: cec-common.yaml#
+
+properties:
+  compatible:
+    const: st,stih-cec
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cec-clk
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: cec-irq
+
+  resets:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - hdmi-phandle
+  - interrupts
+  - resets
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/stih407-resets.h>
+
+    cec@94a087c {
+        compatible = "st,stih-cec";
+        reg = <0x94a087c 0x64>;
+
+        clocks = <&clk_sysin>;
+        clock-names = "cec-clk";
+        hdmi-phandle = <&sti_hdmi>;
+        interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "cec-irq";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_cec0_default>;
+        resets = <&softreset STIH407_LPM_SOFTRESET>;
+    };
diff --git a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
index d75019c093a4..2314a9a14650 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-cec.yaml
+++ b/Documentation/devicetree/bindings/media/cec/st,stm32-cec.yaml
@@ -1,14 +1,13 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/media/st,stm32-cec.yaml#
+$id: http://devicetree.org/schemas/media/cec/st,stm32-cec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 CEC bindings
+title: STMicroelectronics STM32 CEC
 
 maintainers:
-  - Benjamin Gaignard <benjamin.gaignard@st.com>
-  - Yannick Fertre <yannick.fertre@st.com>
+  - Yannick Fertre <yannick.fertre@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/media/coda.yaml b/Documentation/devicetree/bindings/media/coda.yaml
index 36781ee4617f..c9d5adbc8c4a 100644
--- a/Documentation/devicetree/bindings/media/coda.yaml
+++ b/Documentation/devicetree/bindings/media/coda.yaml
@@ -65,7 +65,6 @@ properties:
   iram:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: phandle pointing to the SRAM device node
-    maxItems: 1
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt
deleted file mode 100644
index 0bf6fb7fbeab..000000000000
--- a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE)
-
-Required properties:
-
-- compatible	: should be one of:
-		  "samsung,exynos4212-fimc-lite" for Exynos4212/4412 SoCs,
-		  "samsung,exynos5250-fimc-lite" for Exynos5250 compatible
-		   devices;
-- reg		: physical base address and size of the device memory mapped
-		  registers;
-- interrupts	: should contain FIMC-LITE interrupt;
-- clocks	: FIMC LITE gate clock should be specified in this property.
-- clock-names	: should contain "flite" entry.
-
-Each FIMC device should have an alias in the aliases node, in the form of
-fimc-lite<n>, where <n> is an integer specifying the IP block instance.
diff --git a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt b/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt
deleted file mode 100644
index ce9a22689e53..000000000000
--- a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Samsung S5P/Exynos SoC series JPEG codec
-
-Required properties:
-
-- compatible	: should be one of:
-		  "samsung,s5pv210-jpeg", "samsung,exynos4210-jpeg",
-		  "samsung,exynos3250-jpeg", "samsung,exynos5420-jpeg",
-		  "samsung,exynos5433-jpeg";
-- reg		: address and length of the JPEG codec IP register set;
-- interrupts	: specifies the JPEG codec IP interrupt;
-- clock-names   : should contain:
-		   - "jpeg" for the core gate clock,
-		   - "sclk" for the special clock (optional).
-- clocks	: should contain the clock specifier and clock ID list
-		  matching entries in the clock-names property; from
-		  the common clock bindings.
diff --git a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt
deleted file mode 100644
index 32ced99d4244..000000000000
--- a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Exynos4x12 SoC series Imaging Subsystem (FIMC-IS)
-
-The FIMC-IS is a subsystem for processing image signal from an image sensor.
-The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5
-processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C
-and SPI bus controllers, PWM and ADC.
-
-fimc-is node
-------------
-
-Required properties:
-- compatible	: should be "samsung,exynos4212-fimc-is" for Exynos4212 and
-		  Exynos4412 SoCs;
-- reg		: physical base address and length of the registers set;
-- interrupts	: must contain two FIMC-IS interrupts, in order: ISP0, ISP1;
-- clocks	: list of clock specifiers, corresponding to entries in
-		  clock-names property;
-- clock-names	: must contain "ppmuispx", "ppmuispx", "lite0", "lite1"
-		  "mpll", "sysreg", "isp", "drc", "fd", "mcuisp", "gicisp",
-		  "pwm_isp", "mcuctl_isp", "uart", "ispdiv0", "ispdiv1",
-		  "mcuispdiv0", "mcuispdiv1", "aclk200", "div_aclk200",
-		  "aclk400mcuisp", "div_aclk400mcuisp" entries,
-		  matching entries in the clocks property.
-pmu subnode
------------
-
-Required properties:
- - reg : must contain PMU physical base address and size of the register set.
-
-The following are the FIMC-IS peripheral device nodes and can be specified
-either standalone or as the fimc-is node child nodes.
-
-i2c-isp (ISP I2C bus controller) nodes
-------------------------------------------
-
-Required properties:
-
-- compatible	: should be "samsung,exynos4212-i2c-isp" for Exynos4212 and
-		  Exynos4412 SoCs;
-- reg		: physical base address and length of the registers set;
-- clocks	: must contain gate clock specifier for this controller;
-- clock-names	: must contain "i2c_isp" entry.
-
-For the above nodes it is required to specify a pinctrl state named "default",
-according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt.
-
-Device tree nodes of the image sensors' controlled directly by the FIMC-IS
-firmware must be child nodes of their corresponding ISP I2C bus controller node.
-The data link of these image sensors must be specified using the common video
-interfaces bindings, defined in video-interfaces.txt.
diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
deleted file mode 100644
index 1872688fa408..000000000000
--- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Samsung Exynos5 G-Scaler device
-
-G-Scaler is used for scaling and color space conversion on Exynos5 SoCs.
-
-Required properties:
-- compatible: should be one of
-	      "samsung,exynos5250-gsc"
-	      "samsung,exynos5420-gsc"
-	      "samsung,exynos5433-gsc"
-	      "samsung,exynos5-gsc" (deprecated)
-- reg: should contain G-Scaler physical address location and length.
-- interrupts: should contain G-Scaler interrupt number
-
-Optional properties:
-- samsung,sysreg: handle to syscon used to control the system registers to
-  set writeback input and destination
-
-Example:
-
-gsc_0:  gsc@13e00000 {
-	compatible = "samsung,exynos5250-gsc";
-	reg = <0x13e00000 0x1000>;
-	interrupts = <0 85 0>;
-};
-
-Aliases:
-Each G-Scaler node should have a numbered alias in the aliases node,
-in the form of gscN, N = 0...3. G-Scaler driver uses these aliases
-to retrieve the device IDs using "of_alias_get_id()" call.
-
-Example:
-
-aliases {
-	gsc0 =&gsc_0;
-	gsc1 =&gsc_1;
-	gsc2 =&gsc_2;
-	gsc3 =&gsc_3;
-};
diff --git a/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml b/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml
new file mode 100644
index 000000000000..84a5e894ace4
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx6ull-pxp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Pixel Pipeline
+
+maintainers:
+  - Philipp Zabel <p.zabel@pengutronix.de>
+  - Michael Tretter <m.tretter@pengutronix.de>
+
+description:
+  The Pixel Pipeline (PXP) is a memory-to-memory graphics processing engine
+  that supports scaling, colorspace conversion, alpha blending, rotation, and
+  pixel conversion via lookup table. Different versions are present on various
+  i.MX SoCs from i.MX23 to i.MX7.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx6ul-pxp
+          - fsl,imx6ull-pxp
+          - fsl,imx7d-pxp
+      - items:
+          - enum:
+              - fsl,imx6sll-pxp
+              - fsl,imx6sx-pxp
+          - const: fsl,imx6ull-pxp
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: axi
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6sx-pxp
+              - fsl,imx6ul-pxp
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+    else:
+      properties:
+        interrupts:
+          minItems: 2
+          maxItems: 2
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6ul-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pxp: pxp@21cc000 {
+        compatible = "fsl,imx6ull-pxp";
+        reg = <0x021cc000 0x4000>;
+        interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "axi";
+        clocks = <&clks IMX6UL_CLK_PXP>;
+    };
diff --git a/Documentation/devicetree/bindings/media/fsl-pxp.txt b/Documentation/devicetree/bindings/media/fsl-pxp.txt
deleted file mode 100644
index f8090e06530d..000000000000
--- a/Documentation/devicetree/bindings/media/fsl-pxp.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Freescale Pixel Pipeline
-========================
-
-The Pixel Pipeline (PXP) is a memory-to-memory graphics processing engine
-that supports scaling, colorspace conversion, alpha blending, rotation, and
-pixel conversion via lookup table. Different versions are present on various
-i.MX SoCs from i.MX23 to i.MX7.
-
-Required properties:
-- compatible: should be "fsl,<soc>-pxp", where SoC can be one of imx23, imx28,
-  imx6dl, imx6sl, imx6sll, imx6ul, imx6sx, imx6ull, or imx7d.
-- reg: the register base and size for the device registers
-- interrupts: the PXP interrupt, two interrupts for imx6ull and imx7d.
-- clock-names: should be "axi"
-- clocks: the PXP AXI clock
-
-Example:
-
-pxp@21cc000 {
-	compatible = "fsl,imx6ull-pxp";
-	reg = <0x021cc000 0x4000>;
-	interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-		     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-	clock-names = "axi";
-	clocks = <&clks IMX6UL_CLK_PXP>;
-};
diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt b/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
deleted file mode 100644
index 108bf435b933..000000000000
--- a/Documentation/devicetree/bindings/media/gpio-ir-receiver.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Device-Tree bindings for GPIO IR receiver
-
-Required properties:
-	- compatible: should be "gpio-ir-receiver".
-	- gpios: specifies GPIO used for IR signal reception.
-
-Optional properties:
-	- linux,rc-map-name: see rc.txt file in the same
-	  directory.
-	- linux,autosuspend-period: autosuspend delay time,
-	  the unit is milisecond.
-
-Example node:
-
-	ir: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 19 1>;
-		linux,rc-map-name = "rc-rc6-mce";
-		linux,autosuspend-period = <125>;
-	};
diff --git a/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml
new file mode 100644
index 000000000000..008c007ed702
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/gpio-ir-receiver.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/gpio-ir-receiver.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO Based IR receiver
+
+maintainers:
+  - Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+
+allOf:
+  - $ref: rc.yaml#
+
+properties:
+  compatible:
+    const: gpio-ir-receiver
+
+  gpios:
+    maxItems: 1
+
+  linux,autosuspend-period:
+    description: autosuspend delay time in milliseconds
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  wakeup-source:
+    description: IR receiver can wake-up the system.
+
+required:
+  - compatible
+  - gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ir-receiver {
+        compatible = "gpio-ir-receiver";
+        gpios = <&gpio0 19 1>;
+        linux,rc-map-name = "rc-rc6-mce";
+        linux,autosuspend-period = <125>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
deleted file mode 100644
index 4f91686e54a6..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
+++ /dev/null
@@ -1,116 +0,0 @@
-* Analog Devices ADV748X video decoder with HDMI receiver
-
-The ADV7481 and ADV7482 are multi format video decoders with an integrated
-HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
-from three input sources HDMI, analog and TTL.
-
-Required Properties:
-
-  - compatible: Must contain one of the following
-    - "adi,adv7481" for the ADV7481
-    - "adi,adv7482" for the ADV7482
-
-  - reg: I2C slave addresses
-    The ADV748x has up to twelve 256-byte maps that can be accessed via the
-    main I2C ports. Each map has it own I2C address and acts as a standard
-    slave device on the I2C bus. The main address is mandatory, others are
-    optional and remain at default values if not specified.
-
-Optional Properties:
-
-  - interrupt-names: Should specify the interrupts as "intrq1", "intrq2" and/or
-		     "intrq3". All interrupts are optional. The "intrq3" interrupt
-		     is only available on the adv7481
-  - interrupts: Specify the interrupt lines for the ADV748x
-  - reg-names : Names of maps with programmable addresses.
-		It shall contain all maps needing a non-default address.
-		Possible map names are:
-		  "main", "dpll", "cp", "hdmi", "edid", "repeater",
-		  "infoframe", "cbus", "cec", "sdp", "txa", "txb"
-
-The device node must contain one 'port' child node per device input and output
-port, in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
-are numbered as follows.
-
-	  Name		Type		Port
-	---------------------------------------
-	  AIN0		sink		0
-	  AIN1		sink		1
-	  AIN2		sink		2
-	  AIN3		sink		3
-	  AIN4		sink		4
-	  AIN5		sink		5
-	  AIN6		sink		6
-	  AIN7		sink		7
-	  HDMI		sink		8
-	  TTL		sink		9
-	  TXA		source		10
-	  TXB		source		11
-
-The digital output port nodes, when present, shall contain at least one
-endpoint. Each of those endpoints shall contain the data-lanes property as
-described in video-interfaces.txt.
-
-Required source endpoint properties:
-  - data-lanes: an array of physical data lane indexes
-    The accepted value(s) for this property depends on which of the two
-    sources are described. For TXA 1, 2 or 4 data lanes can be described
-    while for TXB only 1 data lane is valid. See video-interfaces.txt
-    for detailed description.
-
-Ports are optional if they are not connected to anything at the hardware level.
-
-Example:
-
-	video-receiver@70 {
-		compatible = "adi,adv7482";
-		reg = <0x70 0x71 0x72 0x73 0x74 0x75
-		       0x60 0x61 0x62 0x63 0x64 0x65>;
-		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
-			    "infoframe", "cbus", "cec", "sdp", "txa", "txb";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		interrupt-parent = <&gpio6>;
-		interrupt-names = "intrq1", "intrq2";
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
-			     <31 IRQ_TYPE_LEVEL_LOW>;
-
-		port@7 {
-			reg = <7>;
-
-			adv7482_ain7: endpoint {
-				remote-endpoint = <&cvbs_in>;
-			};
-		};
-
-		port@8 {
-			reg = <8>;
-
-			adv7482_hdmi: endpoint {
-				remote-endpoint = <&hdmi_in>;
-			};
-		};
-
-		port@a {
-			reg = <10>;
-
-			adv7482_txa: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <1 2 3 4>;
-				remote-endpoint = <&csi40_in>;
-			};
-		};
-
-		port@b {
-			reg = <11>;
-
-			adv7482_txb: endpoint {
-				clock-lanes = <0>;
-				data-lanes = <1>;
-				remote-endpoint = <&csi20_in>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.yaml b/Documentation/devicetree/bindings/media/i2c/adv748x.yaml
new file mode 100644
index 000000000000..d6353081402b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adv748x.yaml
@@ -0,0 +1,212 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/adv748x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADV748X video decoder with HDMI receiver
+
+maintainers:
+  - Kieran Bingham <kieran.bingham@ideasonboard.com>
+  - Niklas Söderlund <niklas.soderlund@ragnatech.se>
+
+description:
+  The ADV7481 and ADV7482 are multi format video decoders with an integrated
+  HDMI receiver. They can output CSI-2 on two independent outputs TXA and TXB
+  from three input sources HDMI, analog and TTL.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - adi,adv7481
+          - adi,adv7482
+
+  reg:
+    minItems: 1
+    maxItems: 12
+    description:
+      The ADV748x has up to twelve 256-byte maps that can be accessed via the
+      main I2C ports. Each map has it own I2C address and acts as a standard
+      slave device on the I2C bus. The main address is mandatory, others are
+      optional and remain at default values if not specified.
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: main
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+      - enum: [ dpll, cp, hdmi, edid, repeater, infoframe, cbus, cec, sdp, txa, txb ]
+
+  interrupts: true
+
+  interrupt-names: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    patternProperties:
+      "^port@[0-7]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port nodes for analog inputs AIN[0-7].
+
+    properties:
+      port@8:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port node for HDMI.
+
+      port@9:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input port node for TTL.
+
+      port@a:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the CSI-2 transmitter TXA.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@b:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the CSI-2 transmitter TXB.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                maxItems: 1
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: adi,adv7481
+    then:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 3
+
+        interrupt-names:
+          minItems: 1
+          maxItems: 3
+          items:
+            enum: [ intrq1, intrq2, intrq3 ]
+    else:
+      properties:
+        interrupts:
+          minItems: 1
+          maxItems: 2
+
+        interrupt-names:
+          minItems: 1
+          maxItems: 2
+          items:
+            enum: [ intrq1, intrq2 ]
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ports
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        video-receiver@70 {
+            compatible = "adi,adv7482";
+            reg = <0x70 0x71 0x72 0x73 0x74 0x75
+                   0x60 0x61 0x62 0x63 0x64 0x65>;
+            reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+                        "infoframe", "cbus", "cec", "sdp", "txa", "txb";
+
+            interrupt-parent = <&gpio6>;
+            interrupts = <30 IRQ_TYPE_LEVEL_LOW>, <31 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "intrq1", "intrq2";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@7 {
+                    reg = <7>;
+
+                    adv7482_ain7: endpoint {
+                        remote-endpoint = <&cvbs_in>;
+                    };
+                };
+
+                port@8 {
+                    reg = <8>;
+
+                    adv7482_hdmi: endpoint {
+                        remote-endpoint = <&hdmi_in>;
+                    };
+                };
+
+                port@a {
+                    reg = <10>;
+
+                    adv7482_txa: endpoint {
+                        clock-lanes = <0>;
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csi40_in>;
+                    };
+                };
+
+                port@b {
+                    reg = <11>;
+
+                    adv7482_txb: endpoint {
+                        clock-lanes = <0>;
+                        data-lanes = <1>;
+                        remote-endpoint = <&csi20_in>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
index de15cebe2955..7589d377c686 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
@@ -4,23 +4,24 @@
 $id: http://devicetree.org/schemas/media/i2c/adv7604.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Analog Devices ADV7604/11/12 video decoder with HDMI receiver
+title: Analog Devices ADV7604/10/11/12 video decoder with HDMI receiver
 
 maintainers:
   - Hans Verkuil <hverkuil-cisco@xs4all.nl>
 
 description:
-  The ADV7604 and ADV7611/12 are multiformat video decoders with an integrated
-  HDMI receiver. The ADV7604 has four multiplexed HDMI inputs and one analog
-  input, and the ADV7611 has one HDMI input and no analog input. The 7612 is
-  similar to the 7611 but has 2 HDMI inputs.
+  The ADV7604 and ADV7610/11/12 are multiformat video decoders with
+  an integrated HDMI receiver. The ADV7604 has four multiplexed HDMI inputs
+  and one analog input, and the ADV7610/11 have one HDMI input and no analog
+  input. The ADV7612 is similar to the ADV7610/11 but has 2 HDMI inputs.
 
-  These device tree bindings support the ADV7611/12 only at the moment.
+  These device tree bindings support the ADV7610/11/12 only at the moment.
 
 properties:
   compatible:
     items:
       - enum:
+          - adi,adv7610
           - adi,adv7611
           - adi,adv7612
 
@@ -59,7 +60,8 @@ properties:
       enables hot-plug detection.
 
   default-input:
-    maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
     description:
       Select which input is selected after reset.
 
diff --git a/Documentation/devicetree/bindings/media/i2c/ak7375.txt b/Documentation/devicetree/bindings/media/i2c/ak7375.txt
deleted file mode 100644
index aa3e24b41241..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ak7375.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Asahi Kasei Microdevices AK7375 voice coil lens driver
-
-AK7375 is a camera voice coil lens.
-
-Mandatory properties:
-
-- compatible: "asahi-kasei,ak7375"
-- reg: I2C slave address
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
new file mode 100644
index 000000000000..be00de2f2d58
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/aptina,mt9p031.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor
+  with an active array size of 2592H x 1944V. It is programmable through a
+  simple two-wire serial interface.
+
+properties:
+  compatible:
+    enum:
+      - aptina,mt9p006
+      - aptina,mt9p031
+      - aptina,mt9p031m
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vdd-supply:
+    description: Digital supply voltage, 1.8 V
+
+  vdd_io-supply:
+    description: I/O supply voltage, 1.8 or 2.8 V
+
+  vaa-supply:
+    description: Analog supply voltage, 2.8 V
+
+  reset-gpios:
+    maxItems: 1
+    description: Chip reset GPIO
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          input-clock-frequency:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 6000000
+            maximum: 96000000
+            description: Input clock frequency
+
+          pixel-clock-frequency:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            maximum: 96000000
+            description: Target pixel clock frequency
+
+          pclk-sample:
+            default: 0
+
+        required:
+          - input-clock-frequency
+          - pixel-clock-frequency
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vdd-supply
+  - vdd_io-supply
+  - vaa-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mt9p031@5d {
+            compatible = "aptina,mt9p031";
+            reg = <0x5d>;
+            reset-gpios = <&gpio_sensor 0 0>;
+
+            clocks = <&sensor_clk>;
+
+            vdd-supply = <&reg_vdd>;
+            vdd_io-supply = <&reg_vdd_io>;
+            vaa-supply = <&reg_vaa>;
+
+            port {
+                mt9p031_1: endpoint {
+                    input-clock-frequency = <6000000>;
+                    pixel-clock-frequency = <96000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
index e53b8d65f381..088022f88010 100644
--- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
@@ -55,7 +55,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml b/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml
new file mode 100644
index 000000000000..22a810fc7222
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/asahi-kasei,ak7375.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Asahi Kasei Microdevices AK7375 voice coil lens actuator
+
+maintainers:
+  - Tianshu Qiu <tian.shu.qiu@intel.com>
+
+description:
+  AK7375 is a voice coil motor (VCM) camera lens actuator that
+  is controlled over I2C.
+
+properties:
+  compatible:
+    const: asahi-kasei,ak7375
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: VDD supply
+
+  vio-supply:
+    description: I/O pull-up supply
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ak7375: camera-lens@c {
+            compatible = "asahi-kasei,ak7375";
+            reg = <0x0c>;
+
+            vdd-supply = <&vreg_l23a_2p8>;
+            vio-supply = <&vreg_lvs1a_1p8>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
index 63e5b89d2e0b..4e69b6a7ffcc 100644
--- a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Chrontel HDMI-CEC Controller
 
@@ -13,6 +13,9 @@ description:
   The Chrontel CH7322 is a discrete HDMI-CEC controller. It is
   programmable through I2C and drives a single CEC line.
 
+allOf:
+  - $ref: /schemas/media/cec/cec-common.yaml#
+
 properties:
   compatible:
     const: chrontel,ch7322
@@ -40,16 +43,12 @@ properties:
       if in auto mode.
     maxItems: 1
 
-  # see ../cec.txt
-  hdmi-phandle:
-    description: phandle to the HDMI controller
-
 required:
   - compatible
   - reg
   - interrupts
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -58,7 +57,7 @@ examples:
     i2c {
       #address-cells = <1>;
       #size-cells = <0>;
-      ch7322@75 {
+      cec@75 {
         compatible = "chrontel,ch7322";
         reg = <0x75>;
         interrupts = <47 IRQ_TYPE_EDGE_RISING>;
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt
deleted file mode 100644
index b88dcdd41def..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-Dongwoon Anatech DW9714 camera voice coil lens driver
-
-DW9174 is a 10-bit DAC with current sink capability. It is intended
-for driving voice coil lenses in camera modules.
-
-Mandatory properties:
-
-- compatible: "dongwoon,dw9714"
-- reg: I²C slave address
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
new file mode 100644
index 000000000000..66229a3dc05d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9714 camera voice coil lens driver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description:
+  DW9174 is a 10-bit DAC with current sink capability. It is intended for
+  driving voice coil lenses in camera modules.
+
+properties:
+  compatible:
+    const: dongwoon,dw9714
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description:
+      XSD pin for shutdown (active low)
+
+  vcc-supply:
+    description: VDD power supply
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera-lens@c {
+            compatible = "dongwoon,dw9714";
+            reg = <0x0c>;
+            vcc-supply = <&reg_csi_1v8>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
index 21864ab86ec4..a0855d3b7577 100644
--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9768.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Dongwoon Anatech DW9768 Voice Coil Motor (VCM) Lens Device Tree Bindings
+title: Dongwoon Anatech DW9768 Voice Coil Motor (VCM) Lens
 
 maintainers:
   - Dongchun Zhu <dongchun.zhu@mediatek.com>
@@ -38,7 +38,7 @@ properties:
   dongwoon,aac-mode:
     description:
       Indication of AAC mode select.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum:
       - 1    #  AAC2 mode(operation time# 0.48 x Tvib)
       - 2    #  AAC3 mode(operation time# 0.70 x Tvib)
@@ -50,7 +50,7 @@ properties:
     description:
       Number of AAC Timing count that controlled by one 6-bit period of
       vibration register AACT[5:0], the unit of which is 100 us.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     default: 0x20
     minimum: 0x00
     maximum: 0x3f
@@ -59,7 +59,7 @@ properties:
     description:
       Indication of VCM internal clock dividing rate select, as one multiple
       factor to calculate VCM ring periodic time Tvib.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum:
       - 0    #  Dividing Rate -  2
       - 1    #  Dividing Rate -  1
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
deleted file mode 100644
index c4701f1eaaf6..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-Dongwoon Anatech DW9807 voice coil lens driver
-
-DW9807 is a 10-bit DAC with current sink capability. It is intended for
-controlling voice coil lenses.
-
-Mandatory properties:
-
-- compatible: "dongwoon,dw9807-vcm"
-- reg: I2C slave address
diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml
new file mode 100644
index 000000000000..aae246ca3fcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9807-vcm.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2018, 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9807-vcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dongwoon Anatech DW9807 voice coil lens driver
+
+maintainers:
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
+
+description: |
+  DW9807 is a 10-bit DAC with current sink capability. It is intended for
+  controlling voice coil lenses.
+
+properties:
+  compatible:
+    const: dongwoon,dw9807-vcm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        lens@e {
+            compatible = "dongwoon,dw9807-vcm";
+            reg = <0x0e>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
new file mode 100644
index 000000000000..1e2df8cf2937
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor
+
+maintainers:
+  - Martin Kepplinger <martin.kepplinger@puri.sm>
+
+description: |-
+  The Hi-846 is a raw image sensor with an MIPI CSI-2 image data
+  interface and CCI (I2C compatible) control bus. The output format
+  is raw Bayer.
+
+properties:
+  compatible:
+    const: hynix,hi846
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Reference to the mclk clock.
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-rates:
+    maxItems: 1
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the RESETB pin. Active low.
+    maxItems: 1
+
+  shutdown-gpios:
+    description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low.
+    maxItems: 1
+
+  vddio-supply:
+    description: Definition of the regulator used for the VDDIO power supply.
+
+  vdda-supply:
+    description: Definition of the regulator used for the VDDA power supply.
+
+  vddd-supply:
+    description: Definition of the regulator used for the VDDD power supply.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+              - items:
+                  - const: 1
+                  - const: 2
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - assigned-clocks
+  - assigned-clock-rates
+  - vddio-supply
+  - vdda-supply
+  - vddd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hi846: camera@20 {
+            compatible = "hynix,hi846";
+            reg = <0x20>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_csi1>;
+            clocks = <&clk 0>;
+            assigned-clocks = <&clk 0>;
+            assigned-clock-rates = <25000000>;
+            vdda-supply = <&reg_camera_vdda>;
+            vddd-supply = <&reg_camera_vddd>;
+            vddio-supply = <&reg_camera_vddio>;
+            reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+            shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+
+            port {
+                camera_out: endpoint {
+                    remote-endpoint = <&csi1_ep1>;
+                    link-frequencies = /bits/ 64
+                        <80000000 200000000>;
+                    data-lanes = <1 2>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
index 5fc96944b448..07d088cf66e0 100644
--- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
@@ -83,7 +83,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/media/i2c/imx258.yaml b/Documentation/devicetree/bindings/media/i2c/imx258.yaml
index cde0f7383b2a..80d24220baa0 100644
--- a/Documentation/devicetree/bindings/media/i2c/imx258.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/imx258.yaml
@@ -84,7 +84,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -111,7 +111,7 @@ examples:
     };
 
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/media/i2c/imx290.txt b/Documentation/devicetree/bindings/media/i2c/imx290.txt
deleted file mode 100644
index a3cc21410f7c..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/imx290.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-* Sony IMX290 1/2.8-Inch CMOS Image Sensor
-
-The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with
-Square Pixel for Color Cameras. It is programmable through I2C and 4-wire
-interfaces. The sensor output is available via CMOS logic parallel SDR output,
-Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the
-default. No bindings have been defined for the other busses.
-
-Required Properties:
-- compatible: Should be "sony,imx290"
-- reg: I2C bus address of the device
-- clocks: Reference to the xclk clock.
-- clock-names: Should be "xclk".
-- clock-frequency: Frequency of the xclk clock in Hz.
-- vdddo-supply: Sensor digital IO regulator.
-- vdda-supply: Sensor analog regulator.
-- vddd-supply: Sensor digital core regulator.
-
-Optional Properties:
-- reset-gpios: Sensor reset GPIO
-
-The imx290 device node should contain one 'port' child node with
-an 'endpoint' subnode. For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Required Properties on endpoint:
-- data-lanes: check ../video-interfaces.txt
-- link-frequencies: check ../video-interfaces.txt
-- remote-endpoint: check ../video-interfaces.txt
-
-Example:
-	&i2c1 {
-		...
-		imx290: camera-sensor@1a {
-			compatible = "sony,imx290";
-			reg = <0x1a>;
-
-			reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&camera_rear_default>;
-
-			clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
-			clock-names = "xclk";
-			clock-frequency = <37125000>;
-
-			vdddo-supply = <&camera_vdddo_1v8>;
-			vdda-supply = <&camera_vdda_2v8>;
-			vddd-supply = <&camera_vddd_1v5>;
-
-			port {
-				imx290_ep: endpoint {
-					data-lanes = <1 2 3 4>;
-					link-frequencies = /bits/ 64 <445500000>;
-					remote-endpoint = <&csiphy0_ep>;
-				};
-			};
-		};
diff --git a/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml b/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
new file mode 100644
index 000000000000..034a6e3466af
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/isil,isl79987.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intersil ISL79987 Analog to MIPI CSI-2 decoder
+
+maintainers:
+  - Michael Tretter <m.tretter@pengutronix.de>
+  - Marek Vasut <marex@denx.de>
+
+description:
+  The Intersil ISL79987 is an analog to MIPI CSI-2 decoder which is capable of
+  receiving up to four analog stream and multiplexing them into up to four MIPI
+  CSI-2 virtual channels, using one MIPI clock lane and 1/2 data lanes.
+
+properties:
+  compatible:
+    enum:
+      - isil,isl79987
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      A GPIO spec for the RSTB pin (active high)
+
+  powerdown-gpios:
+    maxItems: 1
+    description:
+      A GPIO spec for the Power Down pin (active high)
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 2
+
+            required:
+              - data-lanes
+
+    patternProperties:
+      "^port@[1-4]$":
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Input ports
+
+    required:
+      - port@0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ports
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      isl7998x_mipi@44 {
+        compatible = "isil,isl79987";
+        reg = <0x44>;
+        powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+            isl79987_out: endpoint {
+              remote-endpoint = <&mipi_csi2_in>;
+              data-lanes = <1 2>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+            endpoint {
+              remote-endpoint = <&camera_0>;
+            };
+          };
+
+          port@2 {
+            reg = <2>;
+            endpoint {
+              remote-endpoint = <&camera_1>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index 02f656e78700..a37447256f8d 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -39,7 +39,7 @@ properties:
     maxItems: 1
 
   poc-supply:
-    description: Regulator providing Power over Coax to the cameras
+    description: Regulator providing Power over Coax to all the ports
 
   enable-gpios:
     description: GPIO connected to the \#PWDN pin with inverted polarity
@@ -50,6 +50,21 @@ properties:
   '#gpio-cells':
     const: 2
 
+  maxim,bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 24, 27, 32 ]
+    description: |
+      The GMSL serial data bus width. This setting is normally controlled by
+      the BWS pin, but may be overridden with this property. The value must
+      match the configuration of the remote serializers.
+
+  maxim,i2c-remote-bus-hz:
+    enum: [ 8470, 28300, 84700, 105000, 173000, 339000, 533000, 837000 ]
+    default: 105000
+    description: |
+      The I2C clock frequency for the remote I2C buses. The value must match
+      the configuration of the remote serializers.
+
   maxim,reverse-channel-microvolt:
     minimum: 30000
     maximum: 200000
@@ -70,6 +85,28 @@ properties:
       a remote serializer whose high-threshold noise immunity is not enabled
       is 100000 micro volts
 
+  maxim,gpio-poc:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    description: |
+      Index of the MAX9286 gpio output line (0 or 1) that controls Power over
+      Coax to the cameras and its associated polarity flag.
+
+      The property accepts an array of two unsigned integers, the first being
+      the gpio line index (0 or 1) and the second being the gpio line polarity
+      flag (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW) as defined in
+      <include/dt-bindings/gpio/gpio.h>.
+
+      When the remote cameras power is controlled by one of the MAX9286 gpio
+      lines, this property has to be used to specify which line among the two
+      available ones controls the remote camera power enablement.
+
+      When this property is used it is not possible to register a gpio
+      controller as the gpio lines are controlled directly by the MAX9286 and
+      not available for consumers, nor the 'poc-supply' property should be
+      specified.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -119,6 +156,7 @@ properties:
     patternProperties:
       "^i2c@[0-3]$":
         type: object
+        additionalProperties: false
         description: |
           Child node of the i2c bus multiplexer which represents a GMSL link.
           Each serializer device on the GMSL link remote end is represented with
@@ -130,6 +168,12 @@ properties:
             description: The index of the GMSL channel.
             maxItems: 1
 
+          '#address-cells':
+            const: 1
+
+          '#size-cells':
+            const: 0
+
         patternProperties:
           "^camera@[a-f0-9]+$":
             type: object
@@ -160,12 +204,36 @@ properties:
 
             additionalProperties: false
 
+patternProperties:
+  "^port[0-3]-poc-supply$":
+    description: Regulator providing Power over Coax for a particular port
+
 required:
   - compatible
   - reg
   - ports
   - i2c-mux
-  - gpio-controller
+
+allOf:
+  # Only one way of specifying power supplies is allowed: 'maxim,gpio-poc',
+  # 'poc-supply' or per-port poc-supply. Additionally, if 'maxim,gpio-poc' is
+  # present, then 'gpio-controller' isn't allowed.
+  - if:
+      required:
+        - maxim,gpio-poc
+    then:
+      properties:
+        poc-supply: false
+        gpio-controller: false
+      patternProperties:
+        "^port[0-3]-poc-supply$": false
+
+  - if:
+      required:
+        - poc-supply
+    then:
+      patternProperties:
+        "^port[0-3]-poc-supply$": false
 
 additionalProperties: false
 
@@ -174,140 +242,175 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
 
     i2c@e66d8000 {
-      #address-cells = <1>;
-      #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-      reg = <0 0xe66d8000>;
+        reg = <0 0xe66d8000>;
 
-      gmsl-deserializer@2c {
-        compatible = "maxim,max9286";
-        reg = <0x2c>;
-        poc-supply = <&camera_poc_12v>;
-        enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+        gmsl-deserializer@2c {
+            compatible = "maxim,max9286";
+            reg = <0x2c>;
+            poc-supply = <&camera_poc_12v>;
+            enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
 
-        gpio-controller;
-        #gpio-cells = <2>;
+            gpio-controller;
+            #gpio-cells = <2>;
 
-        maxim,reverse-channel-microvolt = <170000>;
+            maxim,i2c-remote-bus-hz = <339000>;
+            maxim,reverse-channel-microvolt = <170000>;
 
-        ports {
-          #address-cells = <1>;
-          #size-cells = <0>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-          port@0 {
-            reg = <0>;
+                port@0 {
+                    reg = <0>;
 
-            max9286_in0: endpoint {
-              remote-endpoint = <&rdacm20_out0>;
-            };
-          };
+                    max9286_in0: endpoint {
+                        remote-endpoint = <&rdacm20_out0>;
+                    };
+                };
 
-          port@1 {
-            reg = <1>;
+                port@1 {
+                    reg = <1>;
 
-            max9286_in1: endpoint {
-              remote-endpoint = <&rdacm20_out1>;
-            };
-          };
+                    max9286_in1: endpoint {
+                        remote-endpoint = <&rdacm20_out1>;
+                    };
+                };
 
-          port@2 {
-            reg = <2>;
+                port@2 {
+                    reg = <2>;
 
-            max9286_in2: endpoint {
-              remote-endpoint = <&rdacm20_out2>;
-            };
-          };
+                    max9286_in2: endpoint {
+                        remote-endpoint = <&rdacm20_out2>;
+                    };
+                };
 
-          port@3 {
-            reg = <3>;
+                port@3 {
+                    reg = <3>;
 
-            max9286_in3: endpoint {
-              remote-endpoint = <&rdacm20_out3>;
-            };
-          };
+                    max9286_in3: endpoint {
+                        remote-endpoint = <&rdacm20_out3>;
+                    };
+                };
 
-          port@4 {
-            reg = <4>;
+                port@4 {
+                    reg = <4>;
 
-            max9286_out: endpoint {
-              data-lanes = <1 2 3 4>;
-              remote-endpoint = <&csi40_in>;
+                    max9286_out: endpoint {
+                        data-lanes = <1 2 3 4>;
+                        remote-endpoint = <&csi40_in>;
+                    };
+                };
             };
-          };
-        };
 
-        i2c-mux {
-          #address-cells = <1>;
-          #size-cells = <0>;
+            i2c-mux {
+                #address-cells = <1>;
+                #size-cells = <0>;
 
-          i2c@0 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <0>;
+                i2c@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
 
-            camera@51 {
-              compatible = "imi,rdacm20";
-              reg = <0x51>, <0x61>;
+                    camera@51 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x51>, <0x61>;
 
-              port {
-                rdacm20_out0: endpoint {
-                  remote-endpoint = <&max9286_in0>;
-                };
-              };
+                        port {
+                            rdacm20_out0: endpoint {
+                                remote-endpoint = <&max9286_in0>;
+                            };
+                        };
 
-            };
-          };
+                    };
+                };
 
-          i2c@1 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <1>;
+                i2c@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+
+                    camera@52 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x52>, <0x62>;
+
+                        port {
+                            rdacm20_out1: endpoint {
+                                remote-endpoint = <&max9286_in1>;
+                            };
+                        };
+                    };
+                };
 
-            camera@52 {
-              compatible = "imi,rdacm20";
-              reg = <0x52>, <0x62>;
+                i2c@2 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <2>;
+
+                    camera@53 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x53>, <0x63>;
+
+                        port {
+                            rdacm20_out2: endpoint {
+                                remote-endpoint = <&max9286_in2>;
+                            };
+                        };
+                    };
+                };
 
-              port {
-                rdacm20_out1: endpoint {
-                  remote-endpoint = <&max9286_in1>;
+                i2c@3 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <3>;
+
+                    camera@54 {
+                        compatible = "imi,rdacm20";
+                        reg = <0x54>, <0x64>;
+
+                        port {
+                            rdacm20_out3: endpoint {
+                                remote-endpoint = <&max9286_in3>;
+                            };
+                        };
+                    };
                 };
-              };
             };
-          };
-
-          i2c@2 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <2>;
-
-            camera@53 {
-              compatible = "imi,rdacm20";
-              reg = <0x53>, <0x63>;
+        };
 
-              port {
-                rdacm20_out2: endpoint {
-                  remote-endpoint = <&max9286_in2>;
+        /*
+        * Example of a deserializer that controls the camera Power over Coax
+        * through one of its gpio lines.
+        */
+        gmsl-deserializer@6c {
+            compatible = "maxim,max9286";
+            reg = <0x6c>;
+            enable-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+
+            /*
+            * The remote camera power is controlled by MAX9286 GPIO line #0.
+            * No 'poc-supply' nor 'gpio-controller' are specified.
+            */
+            maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+
+            /*
+            * Do not describe connections as they're the same as in the previous
+            * example.
+            */
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@4 {
+                    reg = <4>;
                 };
-              };
             };
-          };
-
-          i2c@3 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-            reg = <3>;
 
-            camera@54 {
-              compatible = "imi,rdacm20";
-              reg = <0x54>, <0x64>;
-
-              port {
-                rdacm20_out3: endpoint {
-                  remote-endpoint = <&max9286_in3>;
-                };
-              };
+            i2c-mux {
+                #address-cells = <1>;
+                #size-cells = <0>;
             };
-          };
         };
-      };
     };
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
new file mode 100644
index 000000000000..444f24838d3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max96712.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/maxim,max96712.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Quad GMSL2 to CSI-2 Deserializer with GMSL1 Compatibility
+
+maintainers:
+  - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
+
+description: |
+  The MAX96712 deserializer converts GMSL2 or GMSL1 serial inputs into MIPI
+  CSI-2 D-PHY or C-PHY formatted outputs. The device allows each link to
+  simultaneously transmit bidirectional control-channel data while forward
+  video transmissions are in progress. The MAX96712 can accommodate as many as
+  four remotely located sensors using industry-standard coax or STP
+  interconnects.
+
+  Each GMSL2 serial link operates at a fixed rate of 3Gbps or 6Gbps in the
+  forward direction and 187.5Mbps in the reverse direction. In GMSL1 mode, the
+  MAX96712 can be paired with first-generation 3.12Gbps or 1.5Gbps GMSL1
+  serializers or operate up to 3.12Gbps with GMSL2 serializers in GMSL1 mode.
+
+properties:
+  compatible:
+    const: maxim,max96712
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  enable-gpios: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 0
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 1
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 2
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: GMSL Input 3
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 Output
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes: true
+
+            required:
+              - data-lanes
+
+    required:
+      - port@4
+
+required:
+  - compatible
+  - reg
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c@e6508000 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reg = <0 0xe6508000>;
+
+            gmsl0: gmsl-deserializer@49 {
+                    compatible = "maxim,max96712";
+                    reg = <0x49>;
+                    enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@4 {
+                                    reg = <4>;
+                                    max96712_out0: endpoint {
+                                            clock-lanes = <0>;
+                                            data-lanes = <1 2 3 4>;
+                                            remote-endpoint = <&csi40_in>;
+                                    };
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
index 39395ea8c318..f8ace8cbccdb 100644
--- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
@@ -104,8 +104,9 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
 
-    i2c2 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -124,7 +125,7 @@ examples:
                     remote-endpoint = <&csi2a_ep>;
                     link-frequencies = /bits/ 64 <199200000 210000000
                                                   499200000>;
-                    bus-type = <4>;
+                    bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
                 };
             };
         };
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt b/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
deleted file mode 100644
index cb60443ff78f..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/mt9p031.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Aptina 1/2.5-Inch 5Mp CMOS Digital Image Sensor
-
-The Aptina MT9P031 is a 1/2.5-inch CMOS active pixel digital image sensor with
-an active array size of 2592H x 1944V. It is programmable through a simple
-two-wire serial interface.
-
-Required Properties:
-- compatible: value should be either one among the following
-	(a) "aptina,mt9p031" for mt9p031 sensor
-	(b) "aptina,mt9p031m" for mt9p031m sensor
-
-- input-clock-frequency: Input clock frequency.
-
-- pixel-clock-frequency: Pixel clock frequency.
-
-Optional Properties:
-- reset-gpios: Chip reset GPIO
-
-For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
-	i2c0@1c22000 {
-		...
-		...
-		mt9p031@5d {
-			compatible = "aptina,mt9p031";
-			reg = <0x5d>;
-			reset-gpios = <&gpio3 30 0>;
-
-			port {
-				mt9p031_1: endpoint {
-					input-clock-frequency = <6000000>;
-					pixel-clock-frequency = <96000000>;
-				};
-			};
-		};
-		...
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml
new file mode 100644
index 000000000000..b617cc5c6a9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/onnn,ar0521.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor AR0521 MIPI CSI-2 sensor
+
+maintainers:
+  - Krzysztof Hałasa <khalasa@piap.pl>
+
+description: |-
+  The AR0521 is a raw CMOS image sensor with MIPI CSI-2 and
+  I2C-compatible control interface.
+
+properties:
+  compatible:
+    const: onnn,ar0521
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: extclk
+
+  vaa-supply:
+    description:
+      Definition of the regulator used as analog (2.7 V) voltage supply.
+
+  vdd-supply:
+    description:
+      Definition of the regulator used as digital core (1.2 V) voltage supply.
+
+  vdd_io-supply:
+    description:
+      Definition of the regulator used as digital I/O (1.8 V) voltage supply.
+
+  reset-gpios:
+    description: reset GPIO, usually active low
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: |
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            const: 4
+          data-lanes:
+            anyOf:
+              - items:
+                  - const: 1
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vaa-supply
+  - vdd-supply
+  - vdd_io-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ar0521: camera-sensor@36 {
+                    compatible = "onnn,ar0521";
+                    reg = <0x36>;
+                    pinctrl-names = "default";
+                    pinctrl-0 = <&pinctrl_mipi_camera>;
+                    clocks = <&clks IMX6QDL_CLK_CKO>;
+                    clock-names = "extclk";
+                    reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+                    vaa-supply = <&reg_2p7v>;
+                    vdd-supply = <&reg_1p2v>;
+                    vdd_io-supply = <&reg_1p8v>;
+
+                    port {
+                           mipi_camera_to_mipi_csi2: endpoint {
+                                    remote-endpoint = <&mipi_csi2_in>;
+                                    data-lanes = <1 2 3 4>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/ov2685.txt b/Documentation/devicetree/bindings/media/i2c/ov2685.txt
deleted file mode 100644
index 625c4a8c0d53..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov2685.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Omnivision OV2685 MIPI CSI-2 sensor
-
-Required Properties:
-- compatible: shall be "ovti,ov2685"
-- clocks: reference to the xvclk input clock
-- clock-names: shall be "xvclk"
-- avdd-supply: Analog voltage supply, 2.8 volts
-- dovdd-supply: Digital I/O voltage supply, 1.8 volts
-- dvdd-supply: Digital core voltage supply, 1.8 volts
-- reset-gpios: Low active reset gpio
-
-The device node shall contain one 'port' child node with an
-'endpoint' subnode for its digital output video port,
-in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-The endpoint optional property 'data-lanes' shall be "<1>".
-
-Example:
-&i2c7 {
-	ov2685: camera-sensor@3c {
-		compatible = "ovti,ov2685";
-		reg = <0x3c>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&clk_24m_cam>;
-
-		clocks = <&cru SCLK_TESTCLKOUT1>;
-		clock-names = "xvclk";
-
-		avdd-supply = <&pp2800_cam>;
-		dovdd-supply = <&pp1800>;
-		dvdd-supply = <&pp1800>;
-		reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
-
-		port {
-			ucam_out: endpoint {
-				remote-endpoint = <&mipi_in_ucam>;
-				data-lanes = <1>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.txt b/Documentation/devicetree/bindings/media/i2c/ov5640.txt
deleted file mode 100644
index c97c2f2da12d..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov5640.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-* Omnivision OV5640 MIPI CSI-2 / parallel sensor
-
-Required Properties:
-- compatible: should be "ovti,ov5640"
-- clocks: reference to the xclk input clock.
-- clock-names: should be "xclk".
-- DOVDD-supply: Digital I/O voltage supply, 1.8 volts
-- AVDD-supply: Analog voltage supply, 2.8 volts
-- DVDD-supply: Digital core voltage supply, 1.5 volts
-
-Optional Properties:
-- reset-gpios: reference to the GPIO connected to the reset pin, if any.
-	       This is an active low signal to the OV5640.
-- powerdown-gpios: reference to the GPIO connected to the powerdown pin,
-		   if any. This is an active high signal to the OV5640.
-- rotation: as defined in
-	    Documentation/devicetree/bindings/media/video-interfaces.txt,
-	    valid values are 0 (sensor mounted upright) and 180 (sensor
-	    mounted upside down).
-
-The device node must contain one 'port' child node for its digital output
-video port, in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-OV5640 can be connected to a MIPI CSI-2 bus or a parallel bus endpoint.
-
-Endpoint node required properties for CSI-2 connection are:
-- remote-endpoint: a phandle to the bus receiver's endpoint node.
-- clock-lanes: should be set to <0> (clock lane on hardware lane 0)
-- data-lanes: should be set to <1> or <1 2> (one or two CSI-2 lanes supported)
-
-Endpoint node required properties for parallel connection are:
-- remote-endpoint: a phandle to the bus receiver's endpoint node.
-- bus-width: shall be set to <8> for 8 bits parallel bus
-	     or <10> for 10 bits parallel bus
-- data-shift: shall be set to <2> for 8 bits parallel bus
-	      (lines 9:2 are used) or <0> for 10 bits parallel bus
-- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
-- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
-- pclk-sample: sample data on rising (1) or falling (0) edge of the pixel clock
-	       signal.
-
-Examples:
-
-&i2c1 {
-	ov5640: camera@3c {
-		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x3c>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		clock-names = "xclk";
-		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
-		AVDD-supply = <&vgen3_reg>;  /* 2.8v */
-		DVDD-supply = <&vgen2_reg>;  /* 1.5v */
-		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
-		rotation = <180>;
-
-		port {
-			/* MIPI CSI-2 bus endpoint */
-			ov5640_to_mipi_csi2: endpoint {
-				remote-endpoint = <&mipi_csi2_from_ov5640>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-	};
-};
-
-&i2c1 {
-	ov5640: camera@3c {
-		compatible = "ovti,ov5640";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x3c>;
-		clocks = <&clk_ext_camera>;
-		clock-names = "xclk";
-
-		port {
-			/* Parallel bus endpoint */
-			ov5640_to_parallel: endpoint {
-				remote-endpoint = <&parallel_from_ov5640>;
-				bus-width = <8>;
-				data-shift = <2>; /* lines 9:2 are used */
-				hsync-active = <0>;
-				vsync-active = <0>;
-				pclk-sample = <1>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt
deleted file mode 100644
index 72ad992f77be..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* Omnivision 1/4-Inch 5Mp CMOS Digital Image Sensor
-
-The Omnivision OV5645 is a 1/4-Inch CMOS active pixel digital image sensor with
-an active array size of 2592H x 1944V. It is programmable through a serial I2C
-interface.
-
-Required Properties:
-- compatible: Value should be "ovti,ov5645".
-- clocks: Reference to the xclk clock.
-- clock-names: Should be "xclk".
-- clock-frequency: Frequency of the xclk clock.
-- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
-  to the hardware pin PWDNB which is physically active low.
-- reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to
-  the hardware pin RESETB.
-- vdddo-supply: Chip digital IO regulator.
-- vdda-supply: Chip analog regulator.
-- vddd-supply: Chip digital core regulator.
-
-The device node must contain one 'port' child node for its digital output
-video port, in accordance with the video interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
-	&i2c1 {
-		...
-
-		ov5645: ov5645@3c {
-			compatible = "ovti,ov5645";
-			reg = <0x3c>;
-
-			enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&camera_rear_default>;
-
-			clocks = <&clks 200>;
-			clock-names = "xclk";
-			clock-frequency = <24000000>;
-
-			vdddo-supply = <&camera_dovdd_1v8>;
-			vdda-supply = <&camera_avdd_2v8>;
-			vddd-supply = <&camera_dvdd_1v2>;
-
-			port {
-				ov5645_ep: endpoint {
-					clock-lanes = <1>;
-					data-lanes = <0 2>;
-					remote-endpoint = <&csi0_ep>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
index baf92aaaf049..57f5e48fd8e0 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ov8856.yaml
@@ -5,10 +5,10 @@
 $id: http://devicetree.org/schemas/media/i2c/ov8856.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Omnivision OV8856 CMOS Sensor Device Tree Bindings
+title: Omnivision OV8856 CMOS Sensor
 
 maintainers:
-  - Dongchun Zhu <dongchun.zhu@mediatek.com>
+  - Sakari Ailus <sakari.ailus@linux.intel.com>
 
 description: |-
   The Omnivision OV8856 is a high performance, 1/4-inch, 8 megapixel, CMOS
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
index 63a040944f3d..763cebe03dc2 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/media/i2c/ovti,ov02a10.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Omnivision OV02A10 CMOS Sensor Device Tree Bindings
+title: Omnivision OV02A10 CMOS Sensor
 
 maintainers:
   - Dongchun Zhu <dongchun.zhu@mediatek.com>
@@ -88,7 +88,7 @@ properties:
         properties:
           link-frequencies: true
           ovti,mipi-clock-voltage:
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             description:
               Definition of MIPI clock voltage unit. This entry corresponds to
               the link speed defined by the 'link-frequencies' property.
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
new file mode 100644
index 000000000000..e2ffe0a9c26b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov2685.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV2685 Image Sensor
+
+maintainers:
+  - Shunqian Zheng <zhengsq@rock-chips.com>
+
+properties:
+  compatible:
+    const: ovti,ov2685
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XVCLK clock
+
+  clock-names:
+    items:
+      - const: xvclk
+
+  dvdd-supply:
+    description: Digital Domain Power Supply
+
+  avdd-supply:
+    description: Analog Domain Power Supply
+
+  dovdd-supply:
+    description: I/O Domain Power Supply
+
+  reset-gpios:
+    maxItems: 1
+    description: Reset Pin GPIO Control (active low)
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - dvdd-supply
+  - avdd-supply
+  - dovdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov2685: camera-sensor@3c {
+            compatible = "ovti,ov2685";
+            reg = <0x3c>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&clk_24m_cam>;
+
+            clocks = <&cru SCLK_TESTCLKOUT1>;
+            clock-names = "xvclk";
+
+            avdd-supply = <&pp2800_cam>;
+            dovdd-supply = <&pp1800>;
+            dvdd-supply = <&pp1800>;
+            reset-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
new file mode 100644
index 000000000000..50579c947f3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov4689.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV4689 CMOS
+
+maintainers:
+  - Mikhail Rudenko <mike.rudenko@gmail.com>
+
+description: |
+  The Omnivision OV4689 is a high performance, 1/3-inch, 4 megapixel
+  image sensor. Ihis chip supports high frame rate speeds up to 90 fps
+  at 2688x1520 resolution. It is programmable through an I2C
+  interface, and sensor output is sent via 1/2/4 lane MIPI CSI-2
+  connection.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov4689
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      External clock (XVCLK) for the sensor, 6-64 MHz
+    maxItems: 1
+
+  dovdd-supply:
+    description:
+      Digital I/O voltage supply, 1.7-3.0 V
+
+  avdd-supply:
+    description:
+      Analog voltage supply, 2.6-3.0 V
+
+  dvdd-supply:
+    description:
+      Digital core voltage supply, 1.1-1.3 V
+
+  powerdown-gpios:
+    description:
+      GPIO connected to the powerdown pin (active low)
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the reset pin (active low)
+
+  orientation: true
+
+  rotation: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Output port node, single endpoint describing the CSI-2 transmitter
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov4689: camera@36 {
+            compatible = "ovti,ov4689";
+            reg = <0x36>;
+
+            clocks = <&ov4689_clk>;
+
+            avdd-supply = <&ov4689_avdd>;
+            dovdd-supply = <&ov4689_dovdd>;
+            dvdd-supply = <&ov4689_dvdd>;
+
+            powerdown-gpios = <&pio 107 GPIO_ACTIVE_LOW>;
+            reset-gpios = <&pio 109 GPIO_ACTIVE_LOW>;
+
+            orientation = <2>;
+            rotation = <0>;
+
+            port {
+                wcam_out: endpoint {
+                    remote-endpoint = <&mipi_in_wcam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <504000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
new file mode 100644
index 000000000000..a621032f9bd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV5640 Image Sensor
+
+maintainers:
+  - Steve Longerbeam <slongerbeam@gmail.com>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov5640
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: XCLK Input Clock
+
+  clock-names:
+    const: xclk
+
+  AVDD-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  DVDD-supply:
+    description: Digital core voltage supply, 1.5 volts
+
+  DOVDD-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  powerdown-gpios:
+    maxItems: 1
+    description: >
+      Reference to the GPIO connected to the powerdown pin, if any.
+
+  reset-gpios:
+    maxItems: 1
+    description: >
+      Reference to the GPIO connected to the reset pin, if any.
+
+  rotation:
+    enum:
+      - 0
+      - 180
+
+  port:
+    description: Digital Output Port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          clock-lanes:
+            const: 0
+
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2]
+
+          bus-width:
+            enum: [8, 10]
+
+          data-shift:
+            enum: [0, 2]
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - AVDD-supply
+  - DVDD-supply
+  - DOVDD-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/clock/imx6qdl-clock.h>
+      #include <dt-bindings/gpio/gpio.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@3c {
+              compatible = "ovti,ov5640";
+              pinctrl-names = "default";
+              pinctrl-0 = <&pinctrl_ov5640>;
+              reg = <0x3c>;
+              clocks = <&clks IMX6QDL_CLK_CKO>;
+              clock-names = "xclk";
+              DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+              AVDD-supply = <&vgen3_reg>;  /* 2.8v */
+              DVDD-supply = <&vgen2_reg>;  /* 1.5v */
+              powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+              reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+              rotation = <180>;
+
+              port {
+                  /* MIPI CSI-2 bus endpoint */
+                  ov5640_to_mipi_csi2: endpoint {
+                      remote-endpoint = <&mipi_csi2_from_ov5640>;
+                      clock-lanes = <0>;
+                      data-lanes = <1 2>;
+                  };
+              };
+          };
+      };
+
+  - |
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@3c {
+              compatible = "ovti,ov5640";
+              pinctrl-names = "default";
+              pinctrl-0 = <&pinctrl_ov5640>;
+              reg = <0x3c>;
+              clocks = <&clk_ext_camera>;
+              clock-names = "xclk";
+              DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+              AVDD-supply = <&vgen3_reg>;  /* 2.8v */
+              DVDD-supply = <&vgen2_reg>;  /* 1.5v */
+
+              port {
+                  /* Parallel bus endpoint */
+                  ov5640_to_parallel: endpoint {
+                      remote-endpoint = <&parallel_from_ov5640>;
+                      bus-width = <8>;
+                      data-shift = <2>; /* lines 9:2 are used */
+                      hsync-active = <0>;
+                      vsync-active = <0>;
+                      pclk-sample = <1>;
+                  };
+              };
+          };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml
new file mode 100644
index 000000000000..bc9b27afe3ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5645.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5645.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV5645 Image Sensor
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+properties:
+  compatible:
+    const: ovti,ov5645
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: XCLK Input Clock
+
+  clock-frequency:
+    description: Frequency of the xclk clock in Hz.
+
+  vdda-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  vddd-supply:
+    description: Digital core voltage supply, 1.5 volts
+
+  vdddo-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  enable-gpios:
+    maxItems: 1
+    description:
+      Reference to the GPIO connected to the PWDNB pin, if any.
+
+  reset-gpios:
+    maxItems: 1
+    description:
+      Reference to the GPIO connected to the RESETB pin, if any.
+
+  port:
+    description: Digital Output Port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2]
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vdddo-supply
+  - vdda-supply
+  - vddd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@3c {
+            compatible = "ovti,ov5645";
+            reg = <0x3c>;
+            clocks = <&clks 1>;
+            clock-frequency = <24000000>;
+            vdddo-supply = <&ov5645_vdddo_1v8>;
+            vdda-supply = <&ov5645_vdda_2v8>;
+            vddd-supply = <&ov5645_vddd_1v5>;
+            enable-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_ov5645>;
+
+            port {
+                ov5645_ep: endpoint {
+                    remote-endpoint = <&csi0_ep>;
+                    data-lanes = <1 2>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
index 246dc5fec716..1f497679168c 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/i2c/ovti,ov5648.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OmniVision OV5648 Image Sensor Device Tree Bindings
+title: OmniVision OV5648 Image Sensor
 
 maintainers:
   - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
@@ -81,7 +81,7 @@ examples:
     #include <dt-bindings/clock/sun8i-v3s-ccu.h>
     #include <dt-bindings/gpio/gpio.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml
new file mode 100644
index 000000000000..6e089fe1d613
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5670.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5670.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5670 5 Megapixels raw image sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+
+description: |-
+  The OV5670 is a 5 Megapixels raw image sensor which provides images in 10-bits
+  RAW BGGR Bayer format on a 2 data lanes MIPI CSI-2 serial interface and is
+  controlled through an I2C compatible control bus.
+
+properties:
+  compatible:
+    const: ovti,ov5670
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: System clock. From 6 to 27 MHz.
+    maxItems: 1
+
+  powerdown-gpios:
+    description: Reference to the GPIO connected to the PWDNB pin. Active low.
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low.
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog circuit power. Typically 2.8V.
+
+  dvdd-supply:
+    description: Digital circuit power. Typically 1.2V.
+
+  dovdd-supply:
+    description: Digital I/O circuit power. Typically 2.8V or 1.8V.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+            items:
+              enum: [1, 2]
+
+          clock-noncontinuous: true
+          remote-endpoint: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5670: sensor@36 {
+            compatible = "ovti,ov5670";
+            reg = <0x36>;
+
+            clocks = <&sensor_xclk>;
+
+            port {
+                ov5670_ep: endpoint {
+                    remote-endpoint = <&csi_ep>;
+                    data-lanes = <1 2>;
+                    clock-noncontinuous;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
new file mode 100644
index 000000000000..ad07204057f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5675.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5675 CMOS Sensor
+
+maintainers:
+  - Quentin Schulz <quentin.schulz@theobroma-systems.com>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+description: |
+  The Omnivision OV5675 is a high performance, 1/5-inch, 5 megapixel, CMOS
+  image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
+  sub-sampled, and windowed 10-bit MIPI images in various formats via the
+  Serial Camera Control Bus (SCCB) interface.
+
+  This chip is programmable through I2C and two-wire SCCB. The sensor output
+  is available via CSI-2 serial data output (up to 2-lane).
+
+properties:
+  compatible:
+    const: ovti,ov5675
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      System input clock (aka XVCLK). From 6 to 27 MHz.
+    maxItems: 1
+
+  dovdd-supply:
+    description:
+      Digital I/O voltage supply, 1.8 volts.
+
+  avdd-supply:
+    description:
+      Analog voltage supply, 2.8 volts.
+
+  dvdd-supply:
+    description:
+      Digital core voltage supply, 1.2 volts.
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDN which is physically
+      active low.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+
+          # Supports max data transfer of 900 Mbps per lane
+          link-frequencies: true
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - dovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5675: camera@36 {
+            compatible = "ovti,ov5675";
+            reg = <0x36>;
+
+            reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cif_clkout_m0>;
+
+            clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vcc_1v8>;
+            dvdd-supply = <&vcc_1v2>;
+            dovdd-supply = <&vcc_2v8>;
+
+            rotation = <90>;
+            orientation = <0>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <450000000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
new file mode 100644
index 000000000000..359dc08440a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2022 Amarulasolutions
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5693 CMOS Sensor
+
+maintainers:
+  - Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
+
+description: |
+  The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS
+  image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
+  sub-sampled, and windowed 10-bit MIPI images in various formats via the
+  Serial Camera Control Bus (SCCB) interface.
+
+  OV5693 is controlled via I2C and two-wire Serial Camera Control Bus (SCCB).
+  The sensor output is available via CSI-2 serial data output (up to 2-lane).
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov5693
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      System input clock (aka XVCLK). From 6 to 27 MHz.
+    maxItems: 1
+
+  dovdd-supply:
+    description:
+      Digital I/O voltage supply, 1.8V.
+
+  avdd-supply:
+    description:
+      Analog voltage supply, 2.8V.
+
+  dvdd-supply:
+    description:
+      Digital core voltage supply, 1.2V.
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls sensor reset.
+      This corresponds to the hardware pin XSHUTDN which is physically
+      active low.
+    maxItems: 1
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies: true
+
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov5693: camera@36 {
+            compatible = "ovti,ov5693";
+            reg = <0x36>;
+
+            reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cif_clkout_m0>;
+
+            clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clock-rates = <19200000>;
+
+            avdd-supply = <&vcc_1v8>;
+            dvdd-supply = <&vcc_1v2>;
+            dovdd-supply = <&vcc_2v8>;
+
+            rotation = <90>;
+            orientation = <0>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <450000000>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
index 44529425ce3a..5d24edba8f99 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
@@ -105,8 +105,9 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
         ov772x: camera@21 {
@@ -118,7 +119,7 @@ examples:
 
             port {
                 ov772x_0: endpoint {
-                    bus-type = <5>;
+                    bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
                     vsync-active = <0>;
                     hsync-active = <0>;
                     pclk-sample = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml
new file mode 100644
index 000000000000..a65f921ec0fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8858.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov8858.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV8858 Image Sensor
+
+maintainers:
+  - Jacopo Mondi <jacopo.mondi@ideasonboard.com>
+  - Nicholas Roth <nicholas@rothemail.net>
+
+description: |
+  The OmniVision OV8858 is a color CMOS 8 Megapixels (3264x2448) image sensor
+  controlled through an I2C-compatible SCCB bus. The sensor transmits images
+  on a MIPI CSI-2 output interface with up to 4 data lanes.
+
+properties:
+  compatible:
+    const: ovti,ov8858
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: XVCLK external clock
+
+  clock-names:
+    const: xvclk
+
+  dvdd-supply:
+    description: Digital Domain Power Supply
+
+  avdd-supply:
+    description: Analog Domain Power Supply
+
+  dovdd-supply:
+    description: I/O Domain Power Supply
+
+  powerdown-gpios:
+    description: PWDNB powerdown GPIO (active low)
+
+  reset-gpios:
+    maxItems: 1
+    description: XSHUTDN reset GPIO (active low)
+
+  port:
+    description: MIPI CSI-2 transmitter port
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 4
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ov8858: camera@36 {
+            compatible = "ovti,ov8858";
+            reg = <0x36>;
+
+            clocks = <&cru SCLK_CIF_OUT>;
+            clock-names = "xvclk";
+            assigned-clocks = <&cru SCLK_CIF_OUT>;
+            assigned-clock-rates = <24000000>;
+
+            dovdd-supply = <&vcc1v8_dvp>;
+
+            reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>;
+            powerdown-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>;
+
+            port {
+                ucam_out: endpoint {
+                    remote-endpoint = <&mipi_in_ucam>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
index b962863e4f65..8a70e23ba6ab 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/i2c/ovti,ov8865.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OmniVision OV8865 Image Sensor Device Tree Bindings
+title: OmniVision OV8865 Image Sensor
 
 maintainers:
   - Paul Kocialkowski <paul.kocialkowski@bootlin.com>
@@ -82,7 +82,7 @@ examples:
     #include <dt-bindings/clock/sun8i-a83t-ccu.h>
     #include <dt-bindings/gpio/gpio.h>
 
-    i2c2 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
index bf115ab9d926..79a7658f6d05 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
@@ -16,10 +16,13 @@ description:
   sensor with an active array size of 1296H x 816V. It is programmable through
   I2C interface. The I2C client address is fixed to 0x60/0x70 as per sensor data
   sheet. Image data is sent through MIPI CSI-2.
+  OV9281 has a different lens chief ray angle.
 
 properties:
   compatible:
-    const: ovti,ov9282
+    enum:
+      - ovti,ov9281
+      - ovti,ov9282
   reg:
     description: I2C address
     maxItems: 1
@@ -36,6 +39,15 @@ properties:
     description: Reference to the GPIO connected to the XCLR pin, if any.
     maxItems: 1
 
+  avdd-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  dvdd-supply:
+    description: Digital core voltage supply, 1.2 volts
+
+  dovdd-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
   port:
     additionalProperties: false
     $ref: /schemas/graph.yaml#/$defs/port-base
@@ -66,7 +78,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml
index f50e54a722eb..34a05df786ce 100644
--- a/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml
@@ -50,7 +50,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml
new file mode 100644
index 000000000000..c8f2955e0825
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5k5baf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+properties:
+  compatible:
+    const: samsung,s5k5baf
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: mclk
+
+  clock-frequency:
+    default: 24000000
+    description: mclk clock frequency
+
+  rstn-gpios:
+    maxItems: 1
+    description: RSTN pin
+
+  stbyn-gpios:
+    maxItems: 1
+    description: STDBYN pin
+
+  vdda-supply:
+    description: Analog power supply 2.8V (2.6V to 3.0V)
+
+  vddio-supply:
+    description: I/O power supply 1.8V (1.65V to 1.95V) or 2.8V (2.5V to 3.1V)
+
+  vddreg-supply:
+    description:
+      Regulator input power supply 1.8V (1.7V to 1.9V) or 2.8V (2.6V to 3.0)
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - rstn-gpios
+  - stbyn-gpios
+  - vdda-supply
+  - vddio-supply
+  - vddreg-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@2d {
+            compatible = "samsung,s5k5baf";
+            reg = <0x2d>;
+            clocks = <&camera 0>;
+            clock-names = "mclk";
+            clock-frequency = <24000000>;
+            rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>;
+            stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>;
+            vdda-supply = <&cam_io_en_reg>;
+            vddio-supply = <&vtcam_reg>;
+            vddreg-supply = <&vt_core_15v_reg>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&csis1_ep>;
+                    data-lanes = <1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
new file mode 100644
index 000000000000..7e83a94124b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5k6a3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5K6A3(YX) raw image sensor
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+  S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data
+  interfaces and CCI (I2C compatible) control bus.
+
+properties:
+  compatible:
+    const: samsung,s5k6a3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: extclk
+
+  clock-frequency:
+    default: 24000000
+    description: extclk clock frequency
+
+  gpios:
+    maxItems: 1
+    description: GPIO connected to the RESET pin
+
+  afvdd-supply:
+    description: AF (actuator) voltage supply
+
+  svdda-supply:
+    description: Core voltage supply
+
+  svddio-supply:
+    description: I/O voltage supply
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - gpios
+  - afvdd-supply
+  - svdda-supply
+  - svddio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@10 {
+            compatible = "samsung,s5k6a3";
+            reg = <0x10>;
+            clock-frequency = <24000000>;
+            clocks = <&camera 1>;
+            clock-names = "extclk";
+            gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+            afvdd-supply = <&ldo19_reg>;
+            svdda-supply = <&cam_io_reg>;
+            svddio-supply = <&ldo19_reg>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&csis1_ep>;
+                    data-lanes = <1>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
index c9760f895b3e..e2470dd5920c 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
@@ -97,7 +97,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
index 4271fc3cc623..b397a730ee94 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
@@ -52,7 +52,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
new file mode 100644
index 000000000000..a531badc16c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx290.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX290 1/2.8-Inch CMOS Image Sensor
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+  The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with Square
+  Pixel, available in either mono or colour variants. It is programmable
+  through I2C and 4-wire interfaces.
+
+  The sensor output is available via CMOS logic parallel SDR output, Low voltage
+  LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the default.
+  No bindings have been defined for the other busses.
+
+  imx290lqr is the full model identifier for the colour variant. "sony,imx290"
+  is treated the same as this as it was the original compatible string.
+  imx290llr is the mono version of the sensor.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - sony,imx290lqr # Colour
+          - sony,imx290llr # Monochrome
+          - sony,imx327lqr # Colour
+      - const: sony,imx290
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description: Input clock (37.125 MHz or 74.25 MHz)
+    items:
+      - const: xclk
+
+  clock-frequency:
+    description: Frequency of the xclk clock in Hz
+
+  vdda-supply:
+    description: Analog power supply (2.9V)
+
+  vddd-supply:
+    description: Digital core power supply (1.2V)
+
+  vdddo-supply:
+    description: Digital I/O power supply (1.8V)
+
+  reset-gpios:
+    description: Sensor reset (XCLR) GPIO
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: |
+      Video output port
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            anyOf:
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - clock-frequency
+  - vdda-supply
+  - vddd-supply
+  - vdddo-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx290: camera-sensor@1a {
+            compatible = "sony,imx290lqr";
+            reg = <0x1a>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&camera_rear_default>;
+
+            clocks = <&gcc 90>;
+            clock-names = "xclk";
+            clock-frequency = <37125000>;
+
+            vdddo-supply = <&camera_vdddo_1v8>;
+            vdda-supply = <&camera_vdda_2v8>;
+            vddd-supply = <&camera_vddd_1v5>;
+
+            reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+
+            port {
+                imx290_ep: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <445500000>;
+                    remote-endpoint = <&csiphy0_ep>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml
new file mode 100644
index 000000000000..65ad9c100e45
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx296.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx296.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+  The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
+  sensor with square pixel array and 1.58 M effective pixels. This chip
+  features a global shutter with variable charge-integration time. It is
+  programmable through I2C and 4-wire interfaces. The sensor output is
+  available via CSI-2 serial data output (1 Lane).
+
+properties:
+  compatible:
+    enum:
+      - sony,imx296
+      - sony,imx296ll
+      - sony,imx296lq
+    description:
+      The IMX296 sensor exists in two different models, a colour variant
+      (IMX296LQ) and a monochrome variant (IMX296LL). The device exposes the
+      model through registers, allowing for auto-detection with a common
+      "sony,imx296" compatible string. However, some camera modules disable the
+      ability to read the sensor model register, which disables this feature.
+      In those cases, the exact model needs to be specified as "sony,imx296ll"
+      or "sony,imx296lq".
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    description: Input clock (37.125 MHz, 54 MHz or 74.25 MHz)
+    items:
+      - const: inck
+
+  avdd-supply:
+    description: Analog power supply (3.3V)
+
+  dvdd-supply:
+    description: Digital power supply (1.2V)
+
+  ovdd-supply:
+    description: Interface power supply (1.8V)
+
+  reset-gpios:
+    description: Sensor reset (XCLR) GPIO
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - avdd-supply
+  - dvdd-supply
+  - ovdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx296: camera-sensor@1a {
+            compatible = "sony,imx296";
+            reg = <0x1a>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&camera_rear_default>;
+
+            clocks = <&gcc 90>;
+            clock-names = "inck";
+
+            avdd-supply = <&camera_vdda_3v3>;
+            dvdd-supply = <&camera_vddd_1v2>;
+            ovdd-supply = <&camera_vddo_1v8>;
+
+            reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+
+            port {
+                imx296_ep: endpoint {
+                    remote-endpoint = <&csiphy0_ep>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
index f5055b9db693..bce57b22f7b6 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
@@ -65,7 +65,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -82,7 +82,7 @@ examples:
                 imx334: endpoint {
                     remote-endpoint = <&cam>;
                     data-lanes = <1 2 3 4>;
-                    link-frequencies = /bits/ 64 <891000000>;
+                    link-frequencies = /bits/ 64 <891000000 445500000>;
                 };
             };
         };
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
index cf2ca2702cc9..a167dcdb3a32 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
@@ -66,7 +66,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
index afcf70947f7e..d9b7815650fd 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
@@ -19,7 +19,9 @@ description:
 
 properties:
   compatible:
-    const: sony,imx412
+    enum:
+      - sony,imx412
+      - sony,imx577
   reg:
     description: I2C address
     maxItems: 1
@@ -32,6 +34,15 @@ properties:
     description: Clock frequency 6MHz, 12MHz, 18MHz, 24MHz or 27MHz
     maxItems: 1
 
+  dovdd-supply:
+    description: Interface power supply.
+
+  avdd-supply:
+    description: Analog power supply.
+
+  dvdd-supply:
+    description: Digital power supply.
+
   reset-gpios:
     description: Reference to the GPIO connected to the XCLR pin, if any.
     maxItems: 1
@@ -66,7 +77,7 @@ additionalProperties: false
 
 examples:
   - |
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
new file mode 100644
index 000000000000..ffccf5f3c9e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx415.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX415 CMOS Image Sensor
+
+maintainers:
+  - Michael Riesch <michael.riesch@wolfvision.net>
+
+description: |-
+  The Sony IMX415 is a diagonal 6.4 mm (Type 1/2.8) CMOS active pixel type
+  solid-state image sensor with a square pixel array and 8.46 M effective
+  pixels. This chip operates with analog 2.9 V, digital 1.1 V, and interface
+  1.8 V triple power supply, and has low power consumption.
+  The IMX415 is programmable through I2C interface. The sensor output is
+  available via CSI-2 serial data output (two or four lanes).
+
+allOf:
+  - $ref: ../video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: sony,imx415
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: Input clock (24 MHz, 27 MHz, 37.125 MHz, 72 MHz or 74.25 MHz)
+    maxItems: 1
+
+  avdd-supply:
+    description: Analog power supply (2.9 V)
+
+  dvdd-supply:
+    description: Digital power supply (1.1 V)
+
+  ovdd-supply:
+    description: Interface power supply (1.8 V)
+
+  reset-gpios:
+    description: Sensor reset (XCLR) GPIO
+    maxItems: 1
+
+  flash-leds: true
+
+  lens-focus: true
+
+  orientation: true
+
+  rotation: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            oneOf:
+              - items:
+                  - const: 1
+                  - const: 2
+              - items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - avdd-supply
+  - dvdd-supply
+  - ovdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx415: camera-sensor@1a {
+            compatible = "sony,imx415";
+            reg = <0x1a>;
+            avdd-supply = <&vcc2v9_cam>;
+            clocks = <&clock_cam>;
+            dvdd-supply = <&vcc1v1_cam>;
+            lens-focus = <&vcm>;
+            orientation = <2>;
+            ovdd-supply = <&vcc1v8_cam>;
+            reset-gpios = <&gpio_expander 14 GPIO_ACTIVE_LOW>;
+            rotation = <180>;
+
+            port {
+                imx415_ep: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <445500000>;
+                    remote-endpoint = <&mipi_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt
deleted file mode 100644
index 7976e6c40a80..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge
-
-MIPID02 has two CSI-2 input ports, only one of those ports can be active at a
-time. Active port input stream will be de-serialized and its content outputted
-through PARALLEL output port.
-CSI-2 first input port is a dual lane 800Mbps per lane whereas CSI-2 second
-input port is a single lane 800Mbps. Both ports support clock and data lane
-polarity swap. First port also supports data lane swap.
-PARALLEL output port has a maximum width of 12 bits.
-Supported formats are RAW6, RAW7, RAW8, RAW10, RAW12, RGB565, RGB888, RGB444,
-YUV420 8-bit, YUV422 8-bit and YUV420 10-bit.
-
-Required Properties:
-- compatible: shall be "st,st-mipid02"
-- clocks: reference to the xclk input clock.
-- clock-names: shall be "xclk".
-- VDDE-supply: sensor digital IO supply. Must be 1.8 volts.
-- VDDIN-supply: sensor internal regulator supply. Must be 1.8 volts.
-
-Optional Properties:
-- reset-gpios: reference to the GPIO connected to the xsdn pin, if any.
-	       This is an active low signal to the mipid02.
-
-Required subnodes:
-  - ports: A ports node with one port child node per device input and output
-	   port, in accordance with the video interface bindings defined in
-	   Documentation/devicetree/bindings/media/video-interfaces.txt. The
-	   port nodes are numbered as follows:
-
-	   Port Description
-	   -----------------------------
-	   0    CSI-2 first input port
-	   1    CSI-2 second input port
-	   2    PARALLEL output
-
-Endpoint node required property for CSI-2 connection is:
-- data-lanes: shall be <1> for Port 1. for Port 0 dual-lane operation shall be
-<1 2> or <2 1>. For Port 0 single-lane operation shall be <1> or <2>.
-Endpoint node optional property for CSI-2 connection is:
-- lane-polarities: any lane can be inverted or not.
-
-Endpoint node required property for PARALLEL connection is:
-- bus-width: shall be set to <6>, <7>, <8>, <10> or <12>.
-Endpoint node optional properties for PARALLEL connection are:
-- hsync-active: active state of the HSYNC signal, 0/1 for LOW/HIGH respectively.
-LOW being the default.
-- vsync-active: active state of the VSYNC signal, 0/1 for LOW/HIGH respectively.
-LOW being the default.
-
-Example:
-
-mipid02: csi2rx@14 {
-	compatible = "st,st-mipid02";
-	reg = <0x14>;
-	status = "okay";
-	clocks = <&clk_ext_camera_12>;
-	clock-names = "xclk";
-	VDDE-supply = <&vdd>;
-	VDDIN-supply = <&vdd>;
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-
-			ep0: endpoint {
-				data-lanes = <1 2>;
-				remote-endpoint = <&mipi_csi2_in>;
-			};
-		};
-		port@2 {
-			reg = <2>;
-
-			ep2: endpoint {
-				bus-width = <8>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				remote-endpoint = <&parallel_out>;
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
new file mode 100644
index 000000000000..19a39d753aad
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
@@ -0,0 +1,176 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,st-mipid02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge
+
+maintainers:
+  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+  - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description:
+  MIPID02 has two CSI-2 input ports, only one of those ports can be
+  active at a time. Active port input stream will be de-serialized
+  and its content outputted through PARALLEL output port.
+  CSI-2 first input port is a dual lane 800Mbps per lane whereas CSI-2
+  second input port is a single lane 800Mbps. Both ports support clock
+  and data lane polarity swap. First port also supports data lane swap.
+  PARALLEL output port has a maximum width of 12 bits.
+  Supported formats are RAW6, RAW7, RAW8, RAW10, RAW12, RGB565, RGB888,
+  RGB444, YUV420 8-bit, YUV422 8-bit and YUV420 10-bit.
+
+properties:
+  compatible:
+    const: st,st-mipid02
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xclk
+
+  VDDE-supply:
+    description:
+      Sensor digital IO supply. Must be 1.8 volts.
+
+  VDDIN-supply:
+    description:
+      Sensor internal regulator supply. Must be 1.8 volts.
+
+  reset-gpios:
+    description:
+      Reference to the GPIO connected to the xsdn pin, if any.
+      This is an active low signal to the mipid02.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 first input port
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  Single-lane operation shall be <1> or <2> .
+                  Dual-lane operation shall be <1 2> or <2 1> .
+                minItems: 1
+                maxItems: 2
+
+              lane-polarities:
+                description:
+                  Any lane can be inverted or not.
+                minItems: 1
+                maxItems: 2
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: CSI-2 second input port
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  Single-lane operation shall be <1> or <2> .
+                maxItems: 1
+
+              lane-polarities:
+                description:
+                  Any lane can be inverted or not.
+                maxItems: 1
+
+            required:
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Output port
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              bus-width:
+                enum: [6, 7, 8, 10, 12]
+
+            required:
+              - bus-width
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
+
+    required:
+      - port@2
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - VDDE-supply
+  - VDDIN-supply
+  - ports
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        mipid02: csi2rx@14 {
+            compatible = "st,st-mipid02";
+            reg = <0x14>;
+            status = "okay";
+            clocks = <&clk_ext_camera_12>;
+            clock-names = "xclk";
+            VDDE-supply = <&vdd>;
+            VDDIN-supply = <&vdd>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+
+                    ep0: endpoint {
+                        data-lanes = <1 2>;
+                        remote-endpoint = <&mipi_csi2_in>;
+                    };
+                };
+                port@2 {
+                    reg = <2>;
+
+                    ep2: endpoint {
+                        bus-width = <8>;
+                        hsync-active = <0>;
+                        vsync-active = <0>;
+                        remote-endpoint = <&parallel_out>;
+                    };
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml
new file mode 100644
index 000000000000..8c28848b226a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2022 STMicroelectronics SA.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,st-vgxy61.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics VGxy61 HDR Global Shutter Sensor Family
+
+maintainers:
+  - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+  - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description: |-
+  STMicroelectronics VGxy61 family has a CSI-2 output port. CSI-2 output is a
+  quad lanes 800Mbps per lane.
+  Supported formats are RAW8, RAW10, RAW12, RAW14 and RAW16.
+  Following part number are supported
+  - VG5661 and VG6661 are 1.6 Mpx (1464 x 1104) monochrome and color sensors.
+  Maximum frame rate is 75 fps.
+  - VG5761 and VG6761 are 2.3 Mpx (1944 x 1204) monochrome and color sensors.
+  Maximum frame rate is 60 fps.
+
+properties:
+  compatible:
+    const: st,st-vgxy61
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  VCORE-supply:
+    description:
+      Sensor digital core supply. Must be 1.2 volts.
+
+  VDDIO-supply:
+    description:
+      Sensor digital IO supply. Must be 1.8 volts.
+
+  VANA-supply:
+    description:
+      Sensor analog supply. Must be 2.8 volts.
+
+  reset-gpios:
+    description:
+      Reference to the GPIO connected to the reset pin, if any.
+      This is an active low signal to the vgxy61.
+
+  st,strobe-gpios-polarity:
+    description:
+      Invert polarity of illuminator's lights strobe GPIOs.
+      These GPIOs directly drive the illuminator LEDs.
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            description:
+              CSI lanes to use
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+          remote-endpoint: true
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - clocks
+  - VCORE-supply
+  - VDDIO-supply
+  - VANA-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        vgxy61: csi2tx@10 {
+            compatible = "st,st-vgxy61";
+            reg = <0x10>;
+            clocks = <&clk_ext_camera>;
+            VCORE-supply = <&v1v2>;
+            VDDIO-supply = <&v1v8>;
+            VANA-supply = <&v2v8>;
+            reset-gpios = <&mfxgpio 18 GPIO_ACTIVE_LOW>;
+            port {
+                ep0: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&mipi_csi2_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
new file mode 100644
index 000000000000..b8ba85a2416c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/toshiba,tc358746.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358746 Parallel to MIPI CSI2 Bridge
+
+maintainers:
+  - Marco Felsch <kernel@pengutronix.de>
+
+description: |-
+  The Toshiba TC358746 converts a parallel video stream into a MIPI CSI-2
+  stream. The direction can be either parallel-in -> csi-out or csi-in ->
+  parallel-out The chip is programmable trough I2C and SPI but the SPI
+  interface is only supported in parallel-in -> csi-out mode.
+
+  Note that the current device tree bindings only support the
+  parallel-in -> csi-out path.
+
+properties:
+  compatible:
+    const: toshiba,tc358746
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      The phandle to the reference clock source. This corresponds to the
+      hardware pin REFCLK.
+    maxItems: 1
+
+  clock-names:
+    const: refclk
+
+  "#clock-cells":
+    description: |
+      The bridge can act as clock provider for the sensor. To enable this
+      support #clock-cells must be specified. Attention if this feature is used
+      then the mclk rate must be at least: (2 * link-frequency) / 8
+                                           `------------------´   ^
+                                           internal PLL rate   smallest possible
+                                                                   mclk-div
+    const: 0
+
+  clock-output-names:
+    description:
+      The clock name of the MCLK output, the default name is tc358746-mclk.
+    maxItems: 1
+
+  vddc-supply:
+    description: Digital core voltage supply, 1.2 volts
+
+  vddio-supply:
+    description: Digital I/O voltage supply, 1.8 volts
+
+  vddmipi-supply:
+    description: MIPI CSI phy voltage supply, 1.2 volts
+
+  reset-gpios:
+    description:
+      The phandle and specifier for the GPIO that controls the chip reset.
+      This corresponds to the hardware pin RESX which is physically active low.
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Input port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              hsync-active: true
+              vsync-active: true
+              bus-type:
+                enum: [ 5, 6 ]
+
+            required:
+              - hsync-active
+              - vsync-active
+              - bus-type
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Output port
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+              clock-noncontinuous: true
+              link-frequencies: true
+
+            required:
+              - data-lanes
+              - link-frequencies
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vddc-supply
+  - vddio-supply
+  - vddmipi-supply
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      csi-bridge@e {
+        compatible = "toshiba,tc358746";
+        reg = <0xe>;
+
+        clocks = <&refclk>;
+        clock-names = "refclk";
+
+        reset-gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+
+        vddc-supply = <&v1_2d>;
+        vddio-supply = <&v1_8d>;
+        vddmipi-supply = <&v1_2d>;
+
+        /* sensor mclk provider */
+        #clock-cells = <0>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          /* Input */
+          port@0 {
+            reg = <0>;
+            tc358746_in: endpoint {
+              remote-endpoint = <&sensor_out>;
+              hsync-active = <0>;
+              vsync-active = <0>;
+              bus-type = <5>;
+            };
+          };
+
+          /* Output */
+          port@1 {
+            reg = <1>;
+            tc358746_out: endpoint {
+              remote-endpoint = <&mipi_csi2_in>;
+              data-lanes = <1 2>;
+              clock-noncontinuous;
+              link-frequencies = /bits/ 64 <216000000>;
+            };
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
index b39b84c5f012..de3e483f146a 100644
--- a/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
+++ b/Documentation/devicetree/bindings/media/marvell,mmp2-ccic.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/media/marvell,mmp2-ccic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell MMP2 camera host interface bindings
+title: Marvell MMP2 camera host interface
 
 maintainers:
   - Lubomir Rintel <lkundrak@v3.sk>
@@ -68,6 +68,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/marvell,mmp2.h>
+    #include <dt-bindings/media/video-interfaces.h>
     #include <dt-bindings/power/marvell,mmp2.h>
 
     camera@d420a000 {
@@ -83,7 +84,7 @@ examples:
       port {
         camera0_0: endpoint {
           remote-endpoint = <&ov7670_0>;
-          bus-type = <5>;      /* Parallel */
+          bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
           hsync-active = <1>;  /* Active high */
           vsync-active = <1>;  /* Active high */
           pclk-sample = <0>;   /* Falling */
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
new file mode 100644
index 000000000000..7032c7e15039
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Read Direct Memory Access
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  MediaTek Read Direct Memory Access(RDMA) component used to do read DMA.
+  It contains one line buffer to store the sufficient pixel data, and
+  must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt8183-mdp3-rdma
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RDMA clock
+      - description: RSZ clock
+
+  iommus:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: used for 1st data pipe from RDMA
+      - description: used for 2nd data pipe from RDMA
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - power-domains
+  - clocks
+  - iommus
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    mdp3_rdma0: mdp3-rdma0@14001000 {
+      compatible = "mediatek,mt8183-mdp3-rdma";
+      reg = <0x14001000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
+                            <CMDQ_EVENT_MDP_RDMA0_EOF>;
+      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+      clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+               <&mmsys CLK_MM_MDP_RSZ1>;
+      iommus = <&iommu>;
+      mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
+               <&gce 21 CMDQ_THR_PRIO_LOWEST>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
new file mode 100644
index 000000000000..78f9de6192ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-rsz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Resizer
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  One of Media Data Path 3 (MDP3) components used to do frame resizing.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-rsz
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  clocks:
+    minItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    mdp3_rsz0: mdp3-rsz0@14003000 {
+      compatible = "mediatek,mt8183-mdp3-rsz";
+      reg = <0x14003000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ0_SOF>,
+                            <CMDQ_EVENT_MDP_RSZ0_EOF>;
+      clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+    };
+
+    mdp3_rsz1: mdp3-rsz1@14004000 {
+      compatible = "mediatek,mt8183-mdp3-rsz";
+      reg = <0x14004000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_RSZ1_SOF>,
+                            <CMDQ_EVENT_MDP_RSZ1_EOF>;
+      clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
new file mode 100644
index 000000000000..0baa77198fa2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-wrot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Write DMA with Rotation
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Moudy Ho <moudy.ho@mediatek.com>
+
+description: |
+  One of Media Data Path 3 (MDP3) components used to write DMA with frame rotation.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-wrot
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle of GCE
+        - description: GCE subsys id
+        - description: register offset
+        - description: register size
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property. Each GCE subsys id is mapping to
+      a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  mediatek,gce-events:
+    description:
+      The event id which is mapping to the specific hardware event signal
+      to gce. The event id is defined in the gce header
+      include/dt-bindings/gce/<chip>-gce.h of each chips.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - mediatek,gce-client-reg
+  - mediatek,gce-events
+  - power-domains
+  - clocks
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    mdp3_wrot0: mdp3-wrot0@14005000 {
+      compatible = "mediatek,mt8183-mdp3-wrot";
+      reg = <0x14005000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+      mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>,
+                            <CMDQ_EVENT_MDP_WROT0_EOF>;
+      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+      clocks = <&mmsys CLK_MM_MDP_WROT0>;
+      iommus = <&iommu>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
new file mode 100644
index 000000000000..e5448c60e3eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegdec.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Decoder
+
+maintainers:
+  - kyrie wu <kyrie.wu@mediatek.corp-partner.google.com>
+
+description:
+  MediaTek JPEG Decoder is the JPEG decode hardware present in MediaTek SoCs
+
+properties:
+  compatible:
+    const: mediatek,mt8195-jpgdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 6
+    description:
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+# Required child node:
+patternProperties:
+  "^jpgdec@[0-9a-f]+$":
+    type: object
+    description:
+      The jpeg decoder hardware device node which should be added as subnodes to
+      the main jpeg node.
+
+    properties:
+      compatible:
+        const: mediatek,mt8195-jpgdec-hw
+
+      reg:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 32
+        description:
+          List of the hardware port in respective IOMMU block for current Socs.
+          Refer to bindings/iommu/mediatek,iommu.yaml.
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: jpgdec
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - iommus
+      - interrupts
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - power-domains
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt8195-memory-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        jpgdec-master {
+            compatible = "mediatek,mt8195-jpgdec";
+            power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+            iommus = <&iommu_vpp M4U_PORT_L19_JPGDEC_WDMA0>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA0>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_WDMA1>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BSDMA1>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+                     <&iommu_vpp M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+
+            jpgdec@1a040000 {
+                compatible = "mediatek,mt8195-jpgdec-hw";
+                reg = <0 0x1a040000 0 0x10000>;/* JPGDEC_C0 */
+                iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+                interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys CLK_VENC_JPGDEC>;
+                clock-names = "jpgdec";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
+            };
+
+            jpgdec@1a050000 {
+                compatible = "mediatek,mt8195-jpgdec-hw";
+                reg = <0 0x1a050000 0 0x10000>;/* JPGDEC_C1 */
+                iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET1>,
+                         <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
+                interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys CLK_VENC_JPGDEC_C1>;
+                clock-names = "jpgdec";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
+            };
+
+            jpgdec@1b040000 {
+                compatible = "mediatek,mt8195-jpgdec-hw";
+                reg = <0 0x1b040000 0 0x10000>;/* JPGDEC_C2 */
+                iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA1>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET1>,
+                         <&iommu_vpp M4U_PORT_L20_JPGDEC_BUFF_OFFSET0>;
+                interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGDEC>;
+                clock-names = "jpgdec";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VDEC2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml
new file mode 100644
index 000000000000..596186497b68
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mt8195-jpegenc.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mt8195-jpegenc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Encoder
+
+maintainers:
+  - kyrie wu <kyrie.wu@mediatek.corp-partner.google.com>
+
+description:
+  MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
+
+properties:
+  compatible:
+    const: mediatek,mt8195-jpgenc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 4
+    description:
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+# Required child node:
+patternProperties:
+  "^jpgenc@[0-9a-f]+$":
+    type: object
+    description:
+      The jpeg encoder hardware device node which should be added as subnodes to
+      the main jpeg node.
+
+    properties:
+      compatible:
+        const: mediatek,mt8195-jpgenc-hw
+
+      reg:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 32
+        description:
+          List of the hardware port in respective IOMMU block for current Socs.
+          Refer to bindings/iommu/mediatek,iommu.yaml.
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: jpgenc
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - iommus
+      - interrupts
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - power-domains
+  - iommus
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt8195-memory-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        jpgenc-master {
+            compatible = "mediatek,mt8195-jpgenc";
+            power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+            iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
+                     <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
+                     <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
+                     <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges;
+
+            jpgenc@1a030000 {
+                compatible = "mediatek,mt8195-jpgenc-hw";
+                reg = <0 0x1a030000 0 0x10000>;
+                iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>,
+                         <&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>,
+                         <&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>,
+                         <&iommu_vdo M4U_PORT_L19_JPGENC_BSDMA>;
+                interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys CLK_VENC_JPGENC>;
+                clock-names = "jpgenc";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
+            };
+
+            jpgenc@1b030000 {
+                compatible = "mediatek,mt8195-jpgenc-hw";
+                reg = <0 0x1b030000 0 0x10000>;
+                iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
+                         <&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
+                         <&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
+                         <&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
+                interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH 0>;
+                clocks = <&vencsys_core1 CLK_VENC_CORE1_JPGENC>;
+                clock-names = "jpgenc";
+                power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
new file mode 100644
index 000000000000..fad59b486d5d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-decoder.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,vcodec-decoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Video Decode Accelerator
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |+
+  Mediatek Video Decode is the video decode hardware present in Mediatek
+  SoCs which supports high resolution decoding functionalities.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8173-vcodec-dec
+      - mediatek,mt8183-vcodec-dec
+
+  reg:
+    maxItems: 12
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 8
+
+  clock-names:
+    items:
+      - const: vcodecpll
+      - const: univpll_d2
+      - const: clk_cci400_sel
+      - const: vdec_sel
+      - const: vdecpll
+      - const: vencpll
+      - const: venc_lt_sel
+      - const: vdec_bus_clk_src
+
+  assigned-clocks: true
+
+  assigned-clock-parents: true
+
+  assigned-clock-rates: true
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  mediatek,vpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to vpu.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to scp.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - iommus
+  - assigned-clocks
+  - assigned-clock-parents
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8183-vcodec-dec
+
+    then:
+      required:
+        - mediatek,scp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8173-vcodec-dec
+
+    then:
+      required:
+        - mediatek,vpu
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8173-power.h>
+
+    vcodec_dec: vcodec@16000000 {
+      compatible = "mediatek,mt8173-vcodec-dec";
+      reg = <0x16000000 0x100>,   /*VDEC_SYS*/
+          <0x16020000 0x1000>,  /*VDEC_MISC*/
+          <0x16021000 0x800>,   /*VDEC_LD*/
+          <0x16021800 0x800>,   /*VDEC_TOP*/
+          <0x16022000 0x1000>,  /*VDEC_CM*/
+          <0x16023000 0x1000>,  /*VDEC_AD*/
+          <0x16024000 0x1000>,  /*VDEC_AV*/
+          <0x16025000 0x1000>,  /*VDEC_PP*/
+          <0x16026800 0x800>,   /*VP8_VD*/
+          <0x16027000 0x800>,   /*VP6_VD*/
+          <0x16027800 0x800>,   /*VP8_VL*/
+          <0x16028400 0x400>;   /*VP9_VD*/
+      interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
+      iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_UFO_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
+             <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
+      mediatek,vpu = <&vpu>;
+      power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
+      clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
+             <&topckgen CLK_TOP_UNIVPLL_D2>,
+             <&topckgen CLK_TOP_CCI400_SEL>,
+             <&topckgen CLK_TOP_VDEC_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL>,
+             <&apmixedsys CLK_APMIXED_VENCPLL>,
+             <&topckgen CLK_TOP_VENC_LT_SEL>,
+             <&topckgen CLK_TOP_VCODECPLL_370P5>;
+      clock-names = "vcodecpll",
+                  "univpll_d2",
+                  "clk_cci400_sel",
+                  "vdec_sel",
+                  "vdecpll",
+                  "vencpll",
+                  "venc_lt_sel",
+                  "vdec_bus_clk_src";
+      assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>,
+                      <&topckgen CLK_TOP_CCI400_SEL>,
+                      <&topckgen CLK_TOP_VDEC_SEL>,
+                      <&apmixedsys CLK_APMIXED_VCODECPLL>,
+                      <&apmixedsys CLK_APMIXED_VENCPLL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>,
+                             <&topckgen CLK_TOP_UNIVPLL_D2>,
+                             <&topckgen CLK_TOP_VCODECPLL>;
+      assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
new file mode 100644
index 000000000000..a2051b31fa29
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-encoder.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,vcodec-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Video Encode Accelerator
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |+
+  Mediatek Video Encode is the video encode hardware present in Mediatek
+  SoCs which supports high resolution encoding functionalities.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8173-vcodec-enc-vp8
+      - mediatek,mt8173-vcodec-enc
+      - mediatek,mt8183-vcodec-enc
+      - mediatek,mt8188-vcodec-enc
+      - mediatek,mt8192-vcodec-enc
+      - mediatek,mt8195-vcodec-enc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  assigned-clocks: true
+
+  assigned-clock-parents: true
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  mediatek,vpu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to vpu.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Describes point to scp.
+
+  power-domains:
+    maxItems: 1
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - iommus
+  - assigned-clocks
+  - assigned-clock-parents
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8183-vcodec-enc
+              - mediatek,mt8188-vcodec-enc
+              - mediatek,mt8192-vcodec-enc
+              - mediatek,mt8195-vcodec-enc
+
+    then:
+      required:
+        - mediatek,scp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8173-vcodec-enc-vp8
+              - mediatek,mt8173-vcodec-enc
+
+    then:
+      required:
+        - mediatek,vpu
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8173-vcodec-enc
+            - mediatek,mt8188-vcodec-enc
+            - mediatek,mt8192-vcodec-enc
+            - mediatek,mt8195-vcodec-enc
+
+    then:
+      properties:
+        clock:
+          items:
+            minItems: 1
+            maxItems: 1
+        clock-names:
+          items:
+            - const: venc_sel
+    else:  # for vp8 hw encoder
+      properties:
+        clock:
+          items:
+            minItems: 1
+            maxItems: 1
+        clock-names:
+          items:
+            - const: venc_lt_sel
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mt8173-clk.h>
+    #include <dt-bindings/memory/mt8173-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    vcodec_enc_avc: vcodec@18002000 {
+      compatible = "mediatek,mt8173-vcodec-enc";
+      reg = <0x18002000 0x1000>;
+      interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
+      iommus = <&iommu M4U_PORT_VENC_RCPU>,
+             <&iommu M4U_PORT_VENC_REC>,
+             <&iommu M4U_PORT_VENC_BSDMA>,
+             <&iommu M4U_PORT_VENC_SV_COMV>,
+             <&iommu M4U_PORT_VENC_RD_COMV>,
+             <&iommu M4U_PORT_VENC_CUR_LUMA>,
+             <&iommu M4U_PORT_VENC_CUR_CHROMA>,
+             <&iommu M4U_PORT_VENC_REF_LUMA>,
+             <&iommu M4U_PORT_VENC_REF_CHROMA>,
+             <&iommu M4U_PORT_VENC_NBM_RDMA>,
+             <&iommu M4U_PORT_VENC_NBM_WDMA>;
+      mediatek,vpu = <&vpu>;
+      clocks = <&topckgen CLK_TOP_VENC_SEL>;
+      clock-names = "venc_sel";
+      assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
+    };
+
+    vcodec_enc_vp8: vcodec@19002000 {
+      compatible = "mediatek,mt8173-vcodec-enc-vp8";
+      reg =  <0x19002000 0x1000>;	/* VENC_LT_SYS */
+      interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
+      iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
+             <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
+             <&iommu M4U_PORT_VENC_BSDMA_SET2>,
+             <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
+             <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
+             <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
+             <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
+             <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
+             <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
+      mediatek,vpu = <&vpu>;
+      clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+      clock-names = "venc_lt_sel";
+      assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
+      assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
new file mode 100644
index 000000000000..dca9b0c5e106
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-decoder.yaml
@@ -0,0 +1,268 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,vcodec-subdev-decoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Video Decode Accelerator With Multi Hardware
+
+maintainers:
+  - Yunfei Dong <yunfei.dong@mediatek.com>
+
+description: |
+  Mediatek Video Decode is the video decode hardware present in Mediatek
+  SoCs which supports high resolution decoding functionalities. Required
+  parent and child device node.
+
+  About the Decoder Hardware Block Diagram, please check below:
+
+    +------------------------------------------------+-------------------------------------+
+    |                                                |                                     |
+    |  input -> lat soc HW -> lat HW -> lat buffer --|--> lat buffer -> core HW -> output  |
+    |            ||             ||                   |                     ||              |
+    +------------||-------------||-------------------+---------------------||--------------+
+                 ||     lat     ||                   |               core workqueue  <parent>
+    -------------||-------------||-------------------|---------------------||---------------
+                 ||<------------||----------------HW index---------------->||        <child>
+                 \/             \/                                         \/
+               +-------------------------------------------------------------+
+               |                          enable/disable                     |
+               |                 clk     power    irq    iommu               |
+               |                   (lat/lat soc/core0/core1)                 |
+               +-------------------------------------------------------------+
+
+  As above, there are parent and child devices, child mean each hardware. The child device
+  controls the information of each hardware independent which include clk/power/irq.
+
+  There are two workqueues in parent device: lat workqueue and core workqueue. They are used
+  to lat and core hardware deocder. Lat workqueue need to get input bitstream and lat buffer,
+  then enable lat to decode, writing the result to lat buffer, dislabe hardware when lat decode
+  done. Core workqueue need to get lat buffer and output buffer, then enable core to decode,
+  writing the result to output buffer, disable hardware when core decode done. These two
+  hardwares will decode each frame cyclically.
+
+  For the smi common may not the same for each hardware, can't combine all hardware in one node,
+  or leading to iommu fault when access dram data.
+
+  Lat soc is a hardware which is related with some larb(local arbiter) ports. For mt8195
+  platform, there are some ports like RDMA, UFO in lat soc larb, need to enable its power and
+  clock when lat start to work, don't have interrupt.
+
+  mt8195: lat soc HW + lat HW + core HW
+  mt8192: lat HW + core HW
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8192-vcodec-dec
+      - mediatek,mt8186-vcodec-dec
+      - mediatek,mt8188-vcodec-dec
+      - mediatek,mt8195-vcodec-dec
+
+  reg:
+    minItems: 1
+    items:
+      - description: VDEC_SYS register space
+      - description: VDEC_RACING_CTRL register space
+
+  iommus:
+    minItems: 1
+    maxItems: 32
+    description: |
+      List of the hardware port in respective IOMMU block for current Socs.
+      Refer to bindings/iommu/mediatek,iommu.yaml.
+
+  mediatek,scp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      The node of system control processor (SCP), using
+      the remoteproc & rpmsg framework.
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+# Required child node:
+patternProperties:
+  '^video-codec@[0-9a-f]+$':
+    type: object
+
+    properties:
+      compatible:
+        enum:
+          - mediatek,mtk-vcodec-core
+          - mediatek,mtk-vcodec-lat
+          - mediatek,mtk-vcodec-lat-soc
+
+      reg:
+        maxItems: 1
+        description: VDEC_MISC register space
+
+      interrupts:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 32
+        description: |
+          List of the hardware port in respective IOMMU block for current Socs.
+          Refer to bindings/iommu/mediatek,iommu.yaml.
+
+      clocks:
+        minItems: 4
+        maxItems: 5
+
+      clock-names:
+        minItems: 4
+        maxItems: 5
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - iommus
+      - clocks
+      - clock-names
+      - assigned-clocks
+      - assigned-clock-parents
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - iommus
+  - mediatek,scp
+  - ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - mediatek,mtk-vcodec-core
+          - mediatek,mtk-vcodec-lat
+
+then:
+  required:
+    - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8192-vcodec-dec
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: sel
+            - const: soc-vdec
+            - const: soc-lat
+            - const: vdec
+            - const: top
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8195-vcodec-dec
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: sel
+            - const: vdec
+            - const: lat
+            - const: top
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt8192-larb-port.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt8192-clk.h>
+    #include <dt-bindings/power/mt8192-power.h>
+
+    bus@16000000 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0 0x16000000 0x16000000 0 0x40000>;
+
+        video-codec@16000000 {
+            compatible = "mediatek,mt8192-vcodec-dec";
+            mediatek,scp = <&scp>;
+            iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
+            #address-cells = <2>;
+            #size-cells = <2>;
+            ranges = <0 0 0 0x16000000 0 0x40000>;
+            reg = <0 0x16000000 0 0x1000>;		/* VDEC_SYS */
+            video-codec@10000 {
+                compatible = "mediatek,mtk-vcodec-lat";
+                reg = <0 0x10000 0 0x800>;
+                interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH 0>;
+                iommus = <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_VLD2_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_AVC_MV_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_PRED_RD_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_TILE_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_WDMA_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_LAT0_RG_CTRL_DMA_EXT>,
+                    <&iommu0 M4U_PORT_L5_VDEC_UFO_ENC_EXT>;
+                clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+                    <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+                    <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+                    <&vdecsys_soc CLK_VDEC_SOC_LARB1>,
+                    <&topckgen CLK_TOP_MAINPLL_D4>;
+                clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+                assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+                assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+                power-domains = <&spm MT8192_POWER_DOMAIN_VDEC>;
+            };
+
+            video-codec@25000 {
+                compatible = "mediatek,mtk-vcodec-core";
+                reg = <0 0x25000 0 0x1000>;
+                interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>;
+                iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_UFO_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PP_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PRED_RD_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PRED_WR_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_PPWRAP_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_TILE_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_VLD_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_VLD2_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_AVC_MV_EXT>,
+                    <&iommu0 M4U_PORT_L4_VDEC_RG_CTRL_DMA_EXT>;
+                clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+                    <&vdecsys CLK_VDEC_VDEC>,
+                    <&vdecsys CLK_VDEC_LAT>,
+                    <&vdecsys CLK_VDEC_LARB1>,
+                    <&topckgen CLK_TOP_MAINPLL_D4>;
+                clock-names = "sel", "soc-vdec", "soc-lat", "vdec", "top";
+                assigned-clocks = <&topckgen CLK_TOP_VDEC_SEL>;
+                assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D4>;
+                power-domains = <&spm MT8192_POWER_DOMAIN_VDEC2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
deleted file mode 100644
index 39c1028b2dfb..000000000000
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Mediatek JPEG Decoder
-
-Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
-
-Required properties:
-- compatible : must be one of the following string:
-	"mediatek,mt8173-jpgdec"
-	"mediatek,mt7623-jpgdec", "mediatek,mt2701-jpgdec"
-	"mediatek,mt2701-jpgdec"
-- reg : physical base address of the jpeg decoder registers and length of
-  memory mapped region.
-- interrupts : interrupt number to the interrupt controller.
-- clocks: device clocks, see
-  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: must contain "jpgdec-smi" and "jpgdec".
-- power-domains: a phandle to the power domain, see
-  Documentation/devicetree/bindings/power/power_domain.txt for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
-- iommus: should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
-  for details.
-
-Example:
-	jpegdec: jpegdec@15004000 {
-		compatible = "mediatek,mt2701-jpgdec";
-		reg = <0 0x15004000 0 0x1000>;
-		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
-			  <&imgsys CLK_IMG_JPGDEC>;
-		clock-names = "jpgdec-smi",
-			      "jpgdec";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
-		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
-			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
-	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
new file mode 100644
index 000000000000..cfabf360f278
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek-jpeg-decoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Decoder
+
+maintainers:
+  - Xia Jiang <xia.jiang@mediatek.com>
+
+description: |-
+  Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt8173-jpgdec
+              - mediatek,mt2701-jpgdec
+      - items:
+          - enum:
+              - mediatek,mt7623-jpgdec
+              - mediatek,mt8188-jpgdec
+          - const: mediatek,mt2701-jpgdec
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: jpgdec-smi
+      - const: jpgdec
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 2
+    description: |
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt2701-larb-port.h>
+    #include <dt-bindings/power/mt2701-power.h>
+    jpegdec: jpegdec@15004000 {
+      compatible = "mediatek,mt2701-jpgdec";
+      reg = <0x15004000 0x1000>;
+      interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+      clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+                <&imgsys CLK_IMG_JPGDEC>;
+      clock-names = "jpgdec-smi",
+                    "jpgdec";
+      power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+      iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+               <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
deleted file mode 100644
index 5e53c6ab52d0..000000000000
--- a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-* MediaTek JPEG Encoder
-
-MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
-
-Required properties:
-- compatible : "mediatek,mt2701-jpgenc"
-  followed by "mediatek,mtk-jpgenc"
-- reg : physical base address of the JPEG encoder registers and length of
-  memory mapped region.
-- interrupts : interrupt number to the interrupt controller.
-- clocks: device clocks, see
-  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- clock-names: must contain "jpgenc". It is the clock of JPEG encoder.
-- power-domains: a phandle to the power domain, see
-  Documentation/devicetree/bindings/power/power_domain.txt for details.
-- mediatek,larb: must contain the local arbiters in the current SoCs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
-- iommus: should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
-  for details.
-
-Example:
-	jpegenc: jpegenc@1500a000 {
-		compatible = "mediatek,mt2701-jpgenc",
-			     "mediatek,mtk-jpgenc";
-		reg = <0 0x1500a000 0 0x1000>;
-		interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
-		clocks =  <&imgsys CLK_IMG_VENC>;
-		clock-names = "jpgenc";
-		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
-		mediatek,larb = <&larb2>;
-		iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
-			 <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
-	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
new file mode 100644
index 000000000000..37800e1908cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek-jpeg-encoder.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek-jpeg-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek JPEG Encoder
+
+maintainers:
+  - Xia Jiang <xia.jiang@mediatek.com>
+
+description: |-
+  MediaTek JPEG Encoder is the JPEG encode hardware present in MediaTek SoCs
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt2701-jpgenc
+          - mediatek,mt8183-jpgenc
+          - mediatek,mt8186-jpgenc
+          - mediatek,mt8188-jpgenc
+      - const: mediatek,mtk-jpgenc
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: jpgenc
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 2
+    description: |
+      Points to the respective IOMMU block with master port as argument, see
+      Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml for details.
+      Ports are according to the HW.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - iommus
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/mt2701-larb-port.h>
+    #include <dt-bindings/power/mt2701-power.h>
+    jpegenc: jpegenc@1500a000 {
+      compatible = "mediatek,mt2701-jpgenc",
+                   "mediatek,mtk-jpgenc";
+      reg = <0x1500a000 0x1000>;
+      interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_LOW>;
+      clocks =  <&imgsys CLK_IMG_VENC>;
+      clock-names = "jpgenc";
+      power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+      iommus = <&iommu MT2701_M4U_PORT_JPGENC_RDMA>,
+               <&iommu MT2701_M4U_PORT_JPGENC_BSDMA>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
index caa24943da33..53ef26e2c857 100644
--- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-mdp.txt
@@ -27,9 +27,6 @@ Required properties (DMA function blocks, child node):
 - iommus: should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
-- mediatek,larb: must contain the local arbiters in the current Socs, see
-  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
-  for details.
 
 Example:
 	mdp_rdma0: rdma@14001000 {
@@ -40,7 +37,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA0>;
-		mediatek,larb = <&larb0>;
 		mediatek,vpu = <&vpu>;
 	};
 
@@ -51,7 +47,6 @@ Example:
 			 <&mmsys CLK_MM_MUTEX_32K>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_RDMA1>;
-		mediatek,larb = <&larb4>;
 	};
 
 	mdp_rsz0: rsz@14003000 {
@@ -81,7 +76,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WDMA>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WDMA>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot0: wrot@14007000 {
@@ -90,7 +84,6 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT0>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT0>;
-		mediatek,larb = <&larb0>;
 	};
 
 	mdp_wrot1: wrot@14008000 {
@@ -99,5 +92,4 @@ Example:
 		clocks = <&mmsys CLK_MM_MDP_WROT1>;
 		power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
 		iommus = <&iommu M4U_PORT_MDP_WROT1>;
-		mediatek,larb = <&larb4>;
 	};
diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
deleted file mode 100644
index ad1321e5a22d..000000000000
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ /dev/null
@@ -1,129 +0,0 @@
-Mediatek Video Codec
-
-Mediatek Video Codec is the video codec hw present in Mediatek SoCs which
-supports high resolution encoding and decoding functionalities.
-
-Required properties:
-- compatible : must be one of the following string:
-  "mediatek,mt8173-vcodec-enc-vp8" for mt8173 vp8 encoder.
-  "mediatek,mt8173-vcodec-enc" for mt8173 avc encoder.
-  "mediatek,mt8183-vcodec-enc" for MT8183 encoder.
-  "mediatek,mt8173-vcodec-dec" for MT8173 decoder.
-  "mediatek,mt8192-vcodec-enc" for MT8192 encoder.
-- reg : Physical base address of the video codec registers and length of
-  memory mapped region.
-- interrupts : interrupt number to the cpu.
-- mediatek,larb : must contain the local arbiters in the current Socs.
-- clocks : list of clock specifiers, corresponding to entries in
-  the clock-names property.
-- clock-names: avc encoder must contain "venc_sel", vp8 encoder must
-  contain "venc_lt_sel", decoder must contain "vcodecpll", "univpll_d2",
-  "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll", "venc_lt_sel",
-  "vdec_bus_clk_src".
-- iommus : should point to the respective IOMMU block with master port as
-  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
-  for details.
-- dma-ranges : describes the dma address range space that the codec hw access.
-One of the two following nodes:
-- mediatek,vpu : the node of the video processor unit, if using VPU.
-- mediatek,scp : the node of the SCP unit, if using SCP.
-
-
-Example:
-
-vcodec_dec: vcodec@16000000 {
-    compatible = "mediatek,mt8173-vcodec-dec";
-    reg = <0 0x16000000 0 0x100>,   /*VDEC_SYS*/
-          <0 0x16020000 0 0x1000>,  /*VDEC_MISC*/
-          <0 0x16021000 0 0x800>,   /*VDEC_LD*/
-          <0 0x16021800 0 0x800>,   /*VDEC_TOP*/
-          <0 0x16022000 0 0x1000>,  /*VDEC_CM*/
-          <0 0x16023000 0 0x1000>,  /*VDEC_AD*/
-          <0 0x16024000 0 0x1000>,  /*VDEC_AV*/
-          <0 0x16025000 0 0x1000>,  /*VDEC_PP*/
-          <0 0x16026800 0 0x800>,   /*VP8_VD*/
-          <0 0x16027000 0 0x800>,   /*VP6_VD*/
-          <0 0x16027800 0 0x800>,   /*VP8_VL*/
-          <0 0x16028400 0 0x400>;   /*VP9_VD*/
-    interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>;
-    mediatek,larb = <&larb1>;
-    iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_PP_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_UFO_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_VLD_EXT>,
-             <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>;
-    mediatek,vpu = <&vpu>;
-    power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>;
-    clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>,
-             <&topckgen CLK_TOP_UNIVPLL_D2>,
-             <&topckgen CLK_TOP_CCI400_SEL>,
-             <&topckgen CLK_TOP_VDEC_SEL>,
-             <&topckgen CLK_TOP_VCODECPLL>,
-             <&apmixedsys CLK_APMIXED_VENCPLL>,
-             <&topckgen CLK_TOP_VENC_LT_SEL>,
-             <&topckgen CLK_TOP_VCODECPLL_370P5>;
-    clock-names = "vcodecpll",
-                  "univpll_d2",
-                  "clk_cci400_sel",
-                  "vdec_sel",
-                  "vdecpll",
-                  "vencpll",
-                  "venc_lt_sel",
-                  "vdec_bus_clk_src";
-    assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>,
-                      <&topckgen CLK_TOP_CCI400_SEL>,
-                      <&topckgen CLK_TOP_VDEC_SEL>,
-                      <&apmixedsys CLK_APMIXED_VCODECPLL>,
-                      <&apmixedsys CLK_APMIXED_VENCPLL>;
-    assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>,
-                             <&topckgen CLK_TOP_UNIVPLL_D2>,
-                             <&topckgen CLK_TOP_VCODECPLL>;
-    assigned-clock-rates = <0>, <0>, <0>, <1482000000>, <800000000>;
-  };
-
-vcodec_enc_avc: vcodec@18002000 {
-    compatible = "mediatek,mt8173-vcodec-enc";
-    reg = <0 0x18002000 0 0x1000>;
-    interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
-    iommus = <&iommu M4U_PORT_VENC_RCPU>,
-             <&iommu M4U_PORT_VENC_REC>,
-             <&iommu M4U_PORT_VENC_BSDMA>,
-             <&iommu M4U_PORT_VENC_SV_COMV>,
-             <&iommu M4U_PORT_VENC_RD_COMV>,
-             <&iommu M4U_PORT_VENC_CUR_LUMA>,
-             <&iommu M4U_PORT_VENC_CUR_CHROMA>,
-             <&iommu M4U_PORT_VENC_REF_LUMA>,
-             <&iommu M4U_PORT_VENC_REF_CHROMA>,
-             <&iommu M4U_PORT_VENC_NBM_RDMA>,
-             <&iommu M4U_PORT_VENC_NBM_WDMA>;
-    mediatek,larb = <&larb3>;
-    mediatek,vpu = <&vpu>;
-    clocks = <&topckgen CLK_TOP_VENC_SEL>;
-    clock-names = "venc_sel";
-    assigned-clocks = <&topckgen CLK_TOP_VENC_SEL>;
-    assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL>;
-  };
-
-vcodec_enc_vp8: vcodec@19002000 {
-    compatible = "mediatek,mt8173-vcodec-enc-vp8";
-    reg =  <0 0x19002000 0 0x1000>;	/* VENC_LT_SYS */
-    interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
-    iommus = <&iommu M4U_PORT_VENC_RCPU_SET2>,
-             <&iommu M4U_PORT_VENC_REC_FRM_SET2>,
-             <&iommu M4U_PORT_VENC_BSDMA_SET2>,
-             <&iommu M4U_PORT_VENC_SV_COMA_SET2>,
-             <&iommu M4U_PORT_VENC_RD_COMA_SET2>,
-             <&iommu M4U_PORT_VENC_CUR_LUMA_SET2>,
-             <&iommu M4U_PORT_VENC_CUR_CHROMA_SET2>,
-             <&iommu M4U_PORT_VENC_REF_LUMA_SET2>,
-             <&iommu M4U_PORT_VENC_REC_CHROMA_SET2>;
-    mediatek,larb = <&larb5>;
-    mediatek,vpu = <&vpu>;
-    clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
-    clock-names = "venc_lt_sel";
-    assigned-clocks = <&topckgen CLK_TOP_VENC_LT_SEL>;
-    assigned-clock-parents = <&topckgen CLK_TOP_VCODECPLL_370P5>;
-  };
diff --git a/Documentation/devicetree/bindings/media/meson-ir.txt b/Documentation/devicetree/bindings/media/meson-ir.txt
deleted file mode 100644
index efd9d29a8f10..000000000000
--- a/Documentation/devicetree/bindings/media/meson-ir.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Amlogic Meson IR remote control receiver
-
-Required properties:
- - compatible	: depending on the platform this should be one of:
-		  - "amlogic,meson6-ir"
-		  - "amlogic,meson8b-ir"
-		  - "amlogic,meson-gxbb-ir"
- - reg		: physical base address and length of the device registers
- - interrupts	: a single specifier for the interrupt from the device
-
-Optional properties:
- - linux,rc-map-name:	see rc.txt file in the same directory.
-
-Example:
-
-	ir-receiver@c8100480 {
-		compatible= "amlogic,meson6-ir";
-		reg = <0xc8100480 0x20>;
-		interrupts = <0 15 1>;
-	};
diff --git a/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
new file mode 100644
index 000000000000..b3a345fc6464
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/microchip,csi2dc.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/microchip,csi2dc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip CSI2 Demux Controller (CSI2DC)
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+description:
+  CSI2DC - Camera Serial Interface 2 Demux Controller
+
+  CSI2DC is a hardware block that receives incoming data from either from an
+  IDI interface or from a parallel bus interface.
+  It filters IDI packets based on their data type and virtual channel
+  identifier, then converts the byte stream to a pixel stream into a cross
+  clock domain towards a parallel interface that can be read by a sensor
+  controller.
+  IDI interface is Synopsys proprietary.
+  CSI2DC can act a simple bypass bridge if the incoming data is coming from
+  a parallel interface.
+
+  CSI2DC provides two pipes, one video pipe and one data pipe. Video pipe
+  is connected at the output to a sensor controller and the data pipe is
+  accessible as a DMA slave port to a DMA controller.
+
+  CSI2DC supports a single 'port' node as a sink port with either Synopsys
+  32-bit IDI interface or a parallel interface.
+
+  CSI2DC supports one 'port' node as source port with parallel interface.
+  This is called video pipe.
+  This port has an 'endpoint' that can be connected to a sink port of another
+  controller (next in pipeline).
+
+  CSI2DC also supports direct access to the data through AHB, via DMA channel,
+  called data pipe.
+  For data pipe to be available, a dma controller and a dma channel must be
+  referenced.
+
+properties:
+  compatible:
+    const: microchip,sama7g5-csi2dc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+
+  clock-names:
+    description:
+      CSI2DC must have two clocks to function correctly. One clock is the
+      peripheral clock for the inside functionality of the hardware block.
+      This is named 'pclk'. The second clock must be the cross domain clock,
+      in which CSI2DC will perform clock crossing. This clock must be fed
+      by the next controller in pipeline, which usually is a sensor controller.
+      Normally this clock should be given by this sensor controller who
+      is also a clock source. This clock is named 'scck', sensor controller clock.
+    items:
+      - const: pclk
+      - const: scck
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the input port.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+            description: Endpoint connected to input device
+
+            properties:
+              bus-type:
+                enum: [4, 5, 6]
+                default: 4
+
+              bus-width:
+                enum: [8, 9, 10, 11, 12, 13, 14]
+                default: 14
+
+              clock-noncontinuous:
+                type: boolean
+                description:
+                  Presence of this boolean property decides whether clock is
+                  continuous or noncontinuous.
+
+              remote-endpoint: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Output port node, single endpoint describing the output port.
+
+        properties:
+          endpoint:
+            unevaluatedProperties: false
+            $ref: video-interfaces.yaml#
+            description: Endpoint connected to output device
+
+            properties:
+              bus-type:
+                enum: [5, 6]
+                default: 5
+
+              bus-width:
+                enum: [8, 9, 10, 11, 12, 13, 14]
+                default: 14
+
+              remote-endpoint: true
+
+    required:
+      - port@0
+      - port@1
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - ports
+
+examples:
+  # Example for connecting to a parallel sensor controller block (video pipe)
+  # and the input is received from Synopsys IDI interface
+  - |
+    csi2dc@e1404000 {
+        compatible = "microchip,sama7g5-csi2dc";
+        reg = <0xe1404000 0x500>;
+        clocks = <&pclk>, <&scck>;
+        clock-names = "pclk", "scck";
+
+        ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               port@0 {
+                       reg = <0>; /* must be 0, first child port */
+                       csi2dc_in: endpoint { /* input from IDI interface */
+                               bus-type = <4>; /* MIPI CSI2 D-PHY */
+                               remote-endpoint = <&csi2host_out>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>; /* must be 1, second child port */
+                       csi2dc_out: endpoint {
+                               remote-endpoint = <&xisc_in>; /* output to sensor controller */
+                       };
+               };
+        };
+    };
+
+  # Example for connecting to a DMA master as an AHB slave
+  # and the input is received from Synopsys IDI interface
+  - |
+    #include <dt-bindings/dma/at91.h>
+    csi2dc@e1404000 {
+        compatible = "microchip,sama7g5-csi2dc";
+        reg = <0xe1404000 0x500>;
+        clocks = <&pclk>, <&scck>;
+        clock-names = "pclk", "scck";
+        dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>;
+        dma-names = "rx";
+
+        ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               port@0 {
+                       reg = <0>; /* must be 0, first child port */
+                       csi2dc_input: endpoint { /* input from IDI interface */
+                               remote-endpoint = <&csi2host_out>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>;
+               };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml
index 4b77103ca913..59b805ca47c5 100644
--- a/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml
+++ b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml
@@ -2,8 +2,8 @@
 
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/microchip,sama5d4-vdec.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/microchip,sama5d4-vdec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Hantro G1 VPU codec implemented on Microchip SAMA5D4 SoCs
 
diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
index 086e1430af4f..25f5f79d40ce 100644
--- a/Documentation/devicetree/bindings/media/microchip,xisc.yaml
+++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
@@ -67,7 +67,7 @@ properties:
           remote-endpoint: true
 
           bus-width:
-            enum: [8, 9, 10, 11, 12]
+            enum: [8, 9, 10, 11, 12, 14]
             default: 12
 
           hsync-active:
@@ -106,6 +106,7 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/at91.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/media/video-interfaces.h>
 
     xisc: xisc@e1408000 {
         compatible = "microchip,sama7g5-isc";
@@ -118,7 +119,7 @@ examples:
 
         port {
                 xisc_in: endpoint {
-                       bus-type = <5>; /* Parallel */
+                       bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
                        remote-endpoint = <&csi2dc_out>;
                        hsync-active = <1>;
                        vsync-active = <1>;
@@ -126,4 +127,3 @@ examples:
                 };
         };
     };
-
diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
deleted file mode 100644
index 602169b8aa19..000000000000
--- a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-NVIDIA Tegra Video Decoder Engine
-
-Required properties:
-- compatible : Must contain one of the following values:
-   - "nvidia,tegra20-vde"
-   - "nvidia,tegra30-vde"
-   - "nvidia,tegra114-vde"
-   - "nvidia,tegra124-vde"
-   - "nvidia,tegra132-vde"
-- reg : Must contain an entry for each entry in reg-names.
-- reg-names : Must include the following entries:
-  - sxe
-  - bsev
-  - mbe
-  - ppe
-  - mce
-  - tfe
-  - ppb
-  - vdma
-  - frameid
-- iram : Must contain phandle to the mmio-sram device node that represents
-         IRAM region used by VDE.
-- interrupts : Must contain an entry for each entry in interrupt-names.
-- interrupt-names : Must include the following entries:
-  - sync-token
-  - bsev
-  - sxe
-- clocks : Must include the following entries:
-  - vde
-- resets : Must contain an entry for each entry in reset-names.
-- reset-names : Should include the following entries:
-  - vde
-
-Optional properties:
-- resets : Must contain an entry for each entry in reset-names.
-- reset-names : Must include the following entries:
-  - mc
-- iommus: Must contain phandle to the IOMMU device node.
-
-Example:
-
-video-codec@6001a000 {
-	compatible = "nvidia,tegra20-vde";
-	reg = <0x6001a000 0x1000 /* Syntax Engine */
-	       0x6001b000 0x1000 /* Video Bitstream Engine */
-	       0x6001c000  0x100 /* Macroblock Engine */
-	       0x6001c200  0x100 /* Post-processing Engine */
-	       0x6001c400  0x100 /* Motion Compensation Engine */
-	       0x6001c600  0x100 /* Transform Engine */
-	       0x6001c800  0x100 /* Pixel prediction block */
-	       0x6001ca00  0x100 /* Video DMA */
-	       0x6001d800  0x300 /* Video frame controls */>;
-	reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
-		    "tfe", "ppb", "vdma", "frameid";
-	iram = <&vde_pool>; /* IRAM region */
-	interrupts = <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
-		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
-		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
-	interrupt-names = "sync-token", "bsev", "sxe";
-	clocks = <&tegra_car TEGRA20_CLK_VDE>;
-	reset-names = "vde", "mc";
-	resets = <&tegra_car 61>, <&mc TEGRA20_MC_RESET_VDE>;
-	iommus = <&mc TEGRA_SWGROUP_VDE>;
-};
diff --git a/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml
new file mode 100644
index 000000000000..4ecdee1be37e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nvidia,tegra-vde.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nvidia,tegra-vde.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Video Decoder Engine
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Thierry Reding <thierry.reding@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra132-vde
+              - nvidia,tegra124-vde
+              - nvidia,tegra114-vde
+      - items:
+          - const: nvidia,tegra30-vde
+          - const: nvidia,tegra20-vde
+      - items:
+          - const: nvidia,tegra20-vde
+
+  reg:
+    maxItems: 9
+
+  reg-names:
+    items:
+      - const: sxe
+      - const: bsev
+      - const: mbe
+      - const: ppe
+      - const: mce
+      - const: tfe
+      - const: ppb
+      - const: vdma
+      - const: frameid
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: vde
+      - const: mc
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: sync-token
+      - const: bsev
+      - const: sxe
+
+  iommus:
+    maxItems: 1
+
+  iram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle of the SRAM MMIO node.
+
+  operating-points-v2:
+    description:
+      Should contain freqs and voltages and opp-supported-hw property,
+      which is a bitfield indicating SoC speedo or process ID mask.
+
+  power-domains:
+    maxItems: 1
+    description:
+      Phandle to the SoC core power domain.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+  - reset-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    video-codec@6001a000 {
+      compatible = "nvidia,tegra20-vde";
+      reg = <0x6001a000 0x1000>, /* Syntax Engine */
+            <0x6001b000 0x1000>, /* Video Bitstream Engine */
+            <0x6001c000  0x100>, /* Macroblock Engine */
+            <0x6001c200  0x100>, /* Post-processing Engine */
+            <0x6001c400  0x100>, /* Motion Compensation Engine */
+            <0x6001c600  0x100>, /* Transform Engine */
+            <0x6001c800  0x100>, /* Pixel prediction block */
+            <0x6001ca00  0x100>, /* Video DMA */
+            <0x6001d800  0x300>; /* Video frame controls */
+      reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
+                  "tfe", "ppb", "vdma", "frameid";
+      iram = <&iram>; /* IRAM MMIO region */
+      interrupts = <0  9 4>, /* Sync token */
+                   <0 10 4>, /* BSE-V */
+                   <0 12 4>; /* SXE */
+      interrupt-names = "sync-token", "bsev", "sxe";
+      clocks = <&clk 61>;
+      reset-names = "vde", "mc";
+      resets = <&rst 61>, <&mem 13>;
+      iommus = <&mem 15>;
+      operating-points-v2 = <&dvfs_opp_table>;
+      power-domains = <&domain>;
+    };
diff --git a/Documentation/devicetree/bindings/media/nxp,dw100.yaml b/Documentation/devicetree/bindings/media/nxp,dw100.yaml
new file mode 100644
index 000000000000..21910ff0e1c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,dw100.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,dw100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MP DW100 Dewarper core
+
+maintainers:
+  - Xavier Roumegue <xavier.roumegue@oss.nxp.com>
+
+description: |-
+  The Dewarp Engine provides high-performance dewarp processing for the
+  correction of the distortion that is introduced in images produced by fisheye
+  and wide angle lenses. It is implemented with a line/tile-cache based
+  architecture. With configurable address mapping look up tables and per tile
+  processing, it successfully generates a corrected output image.
+  The engine can be used to perform scaling, cropping and pixel format
+  conversion.
+
+properties:
+  compatible:
+    enum:
+      - nxp,imx8mp-dw100
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The AXI clock
+      - description: The AHB clock
+
+  clock-names:
+    items:
+      - const: axi
+      - const: ahb
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+
+    dewarp: dwe@32e30000 {
+            compatible = "nxp,imx8mp-dw100";
+            reg = <0x32e30000 0x10000>;
+            interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+                     <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+            clock-names = "axi", "ahb";
+            power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_DWE>;
+    };
diff --git a/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
new file mode 100644
index 000000000000..03a23a26c4f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx-mipi-csi2.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver
+
+maintainers:
+  - Rui Miguel Silva <rmfrfs@gmail.com>
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+  The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2
+  receiver IP core named CSIS. The IP core originates from Samsung, and may be
+  compatible with some of the Exynos4 and S5P SoCs. i.MX7 SoCs use CSIS version
+  3.3, and i.MX8 SoCs use CSIS version 3.6.3.
+
+  While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is
+  completely wrapped by the CSIS and doesn't expose a control interface of its
+  own. This binding thus covers both IP cores.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx7-mipi-csi2
+          - fsl,imx8mm-mipi-csi2
+      - items:
+          - enum:
+              - fsl,imx8mp-mipi-csi2
+          - const: fsl,imx8mm-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    items:
+      - description: The peripheral clock (a.k.a. APB clock)
+      - description: The external clock (optionally used as the pixel clock)
+      - description: The MIPI D-PHY clock
+      - description: The AXI clock
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: pclk
+      - const: wrap
+      - const: phy
+      - const: axi
+
+  power-domains:
+    maxItems: 1
+
+  phy-supply:
+    description: The MIPI D-PHY digital power supply
+
+  resets:
+    items:
+      - description: MIPI D-PHY slave reset
+
+  clock-frequency:
+    description: The desired external clock ("wrap") frequency, in Hz
+    default: 166000000
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description:
+                  Note that 'fsl,imx7-mipi-csi2' only supports up to 2 data lines.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - ports
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx7-mipi-csi2
+    then:
+      required:
+        - phy-supply
+        - resets
+    else:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          minItems: 4
+        phy-supply: false
+        resets: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7d-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/reset/imx7-reset.h>
+
+    mipi-csi@30750000 {
+        compatible = "fsl,imx7-mipi-csi2";
+        reg = <0x30750000 0x10000>;
+        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&clks IMX7D_IPG_ROOT_CLK>,
+                 <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
+                 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
+        clock-names = "pclk", "wrap", "phy";
+        clock-frequency = <166000000>;
+
+        power-domains = <&pgc_mipi_phy>;
+        phy-supply = <&reg_1p0d>;
+        resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                mipi_from_sensor: endpoint {
+                    remote-endpoint = <&ov2680_to_mipi>;
+                    data-lanes = <1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                mipi_vc0_to_csi_mux: endpoint {
+                    remote-endpoint = <&csi_mux_from_mipi_vc0>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mipi-csi@32e30000 {
+        compatible = "fsl,imx8mm-mipi-csi2";
+        reg = <0x32e30000 0x1000>;
+        interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+        clock-frequency = <333000000>;
+        clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
+                 <&clk IMX8MM_CLK_CSI1_ROOT>,
+                 <&clk IMX8MM_CLK_CSI1_PHY_REF>,
+                 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
+        clock-names = "pclk", "wrap", "phy", "axi";
+        power-domains = <&mipi_pd>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                imx8mm_mipi_csi_in: endpoint {
+                    remote-endpoint = <&imx477_out>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                imx8mm_mipi_csi_out: endpoint {
+                    remote-endpoint = <&csi_in>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
index 5922a2795167..358019e85d90 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - fsl,imx8mq-csi
           - fsl,imx7-csi
           - fsl,imx6ul-csi
       - items:
@@ -36,6 +37,9 @@ properties:
     items:
       - const: mclk
 
+  power-domains:
+    maxItems: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
 
@@ -49,6 +53,18 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mq-csi
+              - fsl,imx8mm-csi
+    then:
+      required:
+        - power-domains
+
 examples:
   - |
     #include <dt-bindings/clock/imx7d-clock.h>
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
deleted file mode 100644
index 877183cf4278..000000000000
--- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ /dev/null
@@ -1,226 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/media/nxp,imx7-mipi-csi2.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver
-
-maintainers:
-  - Rui Miguel Silva <rmfrfs@gmail.com>
-  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-
-description: |-
-  The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2
-  receiver IP core named CSIS. The IP core originates from Samsung, and may be
-  compatible with some of the Exynos4 and S5P SoCs. i.MX7 SoCs use CSIS version
-  3.3, and i.MX8 SoCs use CSIS version 3.6.3.
-
-  While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is
-  completely wrapped by the CSIS and doesn't expose a control interface of its
-  own. This binding thus covers both IP cores.
-
-properties:
-  compatible:
-    enum:
-      - fsl,imx7-mipi-csi2
-      - fsl,imx8mm-mipi-csi2
-
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
-  clocks:
-    minItems: 3
-    items:
-      - description: The peripheral clock (a.k.a. APB clock)
-      - description: The external clock (optionally used as the pixel clock)
-      - description: The MIPI D-PHY clock
-      - description: The AXI clock
-
-  clock-names:
-    minItems: 3
-    items:
-      - const: pclk
-      - const: wrap
-      - const: phy
-      - const: axi
-
-  power-domains:
-    maxItems: 1
-
-  phy-supply:
-    description: The MIPI D-PHY digital power supply
-
-  resets:
-    items:
-      - description: MIPI D-PHY slave reset
-
-  clock-frequency:
-    description: The desired external clock ("wrap") frequency, in Hz
-    default: 166000000
-
-  ports:
-    $ref: /schemas/graph.yaml#/properties/ports
-
-    properties:
-      port@0:
-        $ref: /schemas/graph.yaml#/$defs/port-base
-        unevaluatedProperties: false
-        description:
-          Input port node, single endpoint describing the CSI-2 transmitter.
-
-        properties:
-          endpoint:
-            $ref: video-interfaces.yaml#
-            unevaluatedProperties: false
-
-            properties:
-              data-lanes:
-                items:
-                  minItems: 1
-                  maxItems: 4
-                  items:
-                    - const: 1
-                    - const: 2
-                    - const: 3
-                    - const: 4
-
-            required:
-              - data-lanes
-
-            allOf:
-              - if:
-                  properties:
-                    compatible:
-                      contains:
-                        const: fsl,imx7-mipi-csi2
-                then:
-                  properties:
-                    data-lanes:
-                      items:
-                        maxItems: 2
-
-      port@1:
-        $ref: /schemas/graph.yaml#/properties/port
-        description:
-          Output port node
-
-required:
-  - compatible
-  - reg
-  - interrupts
-  - clocks
-  - clock-names
-  - power-domains
-  - ports
-
-additionalProperties: false
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            const: fsl,imx7-mipi-csi2
-    then:
-      required:
-        - phy-supply
-        - resets
-    else:
-      properties:
-        clocks:
-          minItems: 4
-        clock-names:
-          minItems: 4
-        phy-supply: false
-        resets: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/imx7d-clock.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/interrupt-controller/irq.h>
-    #include <dt-bindings/reset/imx7-reset.h>
-
-    mipi-csi@30750000 {
-        compatible = "fsl,imx7-mipi-csi2";
-        reg = <0x30750000 0x10000>;
-        interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-
-        clocks = <&clks IMX7D_IPG_ROOT_CLK>,
-                 <&clks IMX7D_MIPI_CSI_ROOT_CLK>,
-                 <&clks IMX7D_MIPI_DPHY_ROOT_CLK>;
-        clock-names = "pclk", "wrap", "phy";
-        clock-frequency = <166000000>;
-
-        power-domains = <&pgc_mipi_phy>;
-        phy-supply = <&reg_1p0d>;
-        resets = <&src IMX7_RESET_MIPI_PHY_MRST>;
-
-        ports {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            port@0 {
-                reg = <0>;
-
-                mipi_from_sensor: endpoint {
-                    remote-endpoint = <&ov2680_to_mipi>;
-                    data-lanes = <1>;
-                };
-            };
-
-            port@1 {
-                reg = <1>;
-
-                mipi_vc0_to_csi_mux: endpoint {
-                    remote-endpoint = <&csi_mux_from_mipi_vc0>;
-                };
-            };
-        };
-    };
-
-  - |
-    #include <dt-bindings/clock/imx8mm-clock.h>
-    #include <dt-bindings/interrupt-controller/arm-gic.h>
-    #include <dt-bindings/interrupt-controller/irq.h>
-
-    mipi-csi@32e30000 {
-        compatible = "fsl,imx8mm-mipi-csi2";
-        reg = <0x32e30000 0x1000>;
-        interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-        clock-frequency = <333000000>;
-        clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
-                 <&clk IMX8MM_CLK_CSI1_ROOT>,
-                 <&clk IMX8MM_CLK_CSI1_PHY_REF>,
-                 <&clk IMX8MM_CLK_DISP_AXI_ROOT>;
-        clock-names = "pclk", "wrap", "phy", "axi";
-        power-domains = <&mipi_pd>;
-
-        ports {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            port@0 {
-                reg = <0>;
-
-                imx8mm_mipi_csi_in: endpoint {
-                    remote-endpoint = <&imx477_out>;
-                    data-lanes = <1 2 3 4>;
-                };
-            };
-
-            port@1 {
-                reg = <1>;
-
-                imx8mm_mipi_csi_out: endpoint {
-                    remote-endpoint = <&csi_in>;
-                };
-            };
-        };
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml
new file mode 100644
index 000000000000..6038b9b5ab36
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8-isi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX8 Image Sensing Interface
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+  The Image Sensing Interface (ISI) combines image processing pipelines with
+  DMA engines to process and capture frames originating from a variety of
+  sources. The inputs to the ISI go through Pixel Link interfaces, and their
+  number and nature is SoC-dependent. They cover both capture interfaces (MIPI
+  CSI-2 RX, HDMI RX, ...) and display engine outputs for writeback support.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mn-isi
+      - fsl,imx8mp-isi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: The AXI clock
+      - description: The APB clock
+      # TODO: Check if the per-channel ipg_proc_clk clocks need to be specified
+      # as well, in case some SoCs have the ability to control them separately.
+      # This may be the case of the i.MX8[DQ]X(P)
+
+  clock-names:
+    items:
+      - const: axi
+      - const: apb
+
+  fsl,blk-ctrl:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      A phandle referencing the block control that contains the CSIS to ISI
+      gasket.
+
+  interrupts:
+    description: Processing pipeline interrupts, one per pipeline
+    minItems: 1
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description: |
+      Ports represent the Pixel Link inputs to the ISI. Their number and
+      assignment are model-dependent. Each port shall have a single endpoint.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - fsl,blk-ctrl
+  - ports
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mn-isi
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        ports:
+          properties:
+            port@0:
+              description: MIPI CSI-2 RX
+          required:
+            - port@0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8mp-isi
+    then:
+      properties:
+        interrupts:
+          maxItems: 2
+        ports:
+          properties:
+            port@0:
+              description: MIPI CSI-2 RX 0
+            port@1:
+              description: MIPI CSI-2 RX 1
+          required:
+            - port@0
+            - port@1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mn-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/imx8mn-power.h>
+
+    isi@32e20000 {
+        compatible = "fsl,imx8mn-isi";
+        reg = <0x32e20000 0x100>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+                 <&clk IMX8MN_CLK_DISP_APB_ROOT>;
+        clock-names = "axi", "apb";
+        fsl,blk-ctrl = <&disp_blk_ctrl>;
+        power-domains = <&disp_blk_ctrl IMX8MN_DISPBLK_PD_ISI>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                isi_in: endpoint {
+                    remote-endpoint = <&mipi_csi_out>;
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    isi@32e00000 {
+        compatible = "fsl,imx8mp-isi";
+        reg = <0x32e00000 0x4000>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
+                 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
+        clock-names = "axi", "apb";
+        fsl,blk-ctrl = <&media_blk_ctrl>;
+        power-domains = <&mediamix_pd>;
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                isi_in_0: endpoint {
+                    remote-endpoint = <&mipi_csi_0_out>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                isi_in_1: endpoint {
+                    remote-endpoint = <&mipi_csi_1_out>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
index 3cc6f42aeb76..3d9d1db37040 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/nxp,imx8-jpeg.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: i.MX8QXP/QM JPEG decoder/encoder Device Tree Bindings
+title: i.MX8QXP/QM JPEG decoder/encoder
 
 maintainers:
   - Mirela Rabulea <mirela.rabulea@nxp.com>
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
index 9c04fa85ee5c..2a14e3b0e004 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml
@@ -58,11 +58,11 @@ properties:
       req_gpr is the gpr register offset of RX_ENABLE for the mipi phy.
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      items:
-        - description: The 'gpr' is the phandle to general purpose register node.
-        - description: The 'req_gpr' is the gpr register offset containing
-                       CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
-          maximum: 0xff
+      - items:
+          - description: The 'gpr' is the phandle to general purpose register node.
+          - description: The 'req_gpr' is the gpr register offset containing
+                        CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
+            maximum: 0xff
 
   interconnects:
     maxItems: 1
@@ -87,14 +87,12 @@ properties:
 
             properties:
               data-lanes:
+                minItems: 1
                 items:
-                  minItems: 1
-                  maxItems: 4
-                  items:
-                    - const: 1
-                    - const: 2
-                    - const: 3
-                    - const: 4
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
 
             required:
               - data-lanes
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
index 762be3f96ce9..3d58f02b0c5d 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
@@ -2,10 +2,10 @@
 
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/nxp,imx8mq-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Hantro G1/G2 VPU codecs implemented on i.MX8MQ SoCs
+title: Hantro G1/G2 VPU codecs implemented on i.MX8M SoCs
 
 maintainers:
   - Philipp Zabel <p.zabel@pengutronix.de>
@@ -15,33 +15,21 @@ description:
 
 properties:
   compatible:
-    const: nxp,imx8mq-vpu
+    oneOf:
+      - const: nxp,imx8mq-vpu
+        deprecated: true
+      - const: nxp,imx8mq-vpu-g1
+      - const: nxp,imx8mq-vpu-g2
+      - const: nxp,imx8mm-vpu-g1
 
   reg:
-    maxItems: 3
-
-  reg-names:
-    items:
-      - const: g1
-      - const: g2
-      - const: ctrl
+    maxItems: 1
 
   interrupts:
-    maxItems: 2
-
-  interrupt-names:
-    items:
-      - const: g1
-      - const: g2
+    maxItems: 1
 
   clocks:
-    maxItems: 3
-
-  clock-names:
-    items:
-      - const: g1
-      - const: g2
-      - const: bus
+    maxItems: 1
 
   power-domains:
     maxItems: 1
@@ -49,31 +37,33 @@ properties:
 required:
   - compatible
   - reg
-  - reg-names
   - interrupts
-  - interrupt-names
   - clocks
-  - clock-names
 
 additionalProperties: false
 
 examples:
   - |
         #include <dt-bindings/clock/imx8mq-clock.h>
+        #include <dt-bindings/power/imx8mq-power.h>
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+        vpu_g1: video-codec@38300000 {
+                compatible = "nxp,imx8mq-vpu-g1";
+                reg = <0x38300000 0x10000>;
+                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
+                power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
+        };
+  - |
+        #include <dt-bindings/clock/imx8mq-clock.h>
+        #include <dt-bindings/power/imx8mq-power.h>
         #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-        vpu: video-codec@38300000 {
-                compatible = "nxp,imx8mq-vpu";
-                reg = <0x38300000 0x10000>,
-                      <0x38310000 0x10000>,
-                      <0x38320000 0x10000>;
-                reg-names = "g1", "g2", "ctrl";
-                interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-                             <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-                interrupt-names = "g1", "g2";
-                clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
-                         <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
-                         <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
-                clock-names = "g1", "g2", "bus";
-                power-domains = <&pgc_vpu>;
+        vpu_g2: video-codec@38300000 {
+                compatible = "nxp,imx8mq-vpu-g2";
+                reg = <0x38310000 0x10000>;
+                interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+                power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
         };
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
index 304908072d72..eb1499912c58 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
@@ -2,8 +2,8 @@
 
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,msm8916-camss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,msm8916-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm CAMSS ISP
 
@@ -83,10 +83,6 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 1
-
               data-lanes:
                 description:
                   An array of physical data lanes indexes.
@@ -99,7 +95,6 @@ properties:
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@1:
@@ -114,16 +109,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 1
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
   reg:
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
index 59ab16ad12f1..2350bf4b370e 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8916-venus.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,msm8916-venus.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,msm8916-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Venus video encode and decode accelerators
+title: Qualcomm MSM8916 Venus video encode and decode accelerators
 
 maintainers:
   - Stanimir Varbanov <stanimir.varbanov@linaro.org>
@@ -14,16 +13,13 @@ description: |
   The Venus IP is a video encode and decode accelerator present
   on Qualcomm platforms
 
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
 properties:
   compatible:
     const: qcom,msm8916-venus
 
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
   power-domains:
     maxItems: 1
 
@@ -39,9 +35,6 @@ properties:
   iommus:
     maxItems: 1
 
-  memory-region:
-    maxItems: 1
-
   video-decoder:
     type: object
 
@@ -66,56 +59,36 @@ properties:
 
     additionalProperties: false
 
-  video-firmware:
-    type: object
-
-    description: |
-      Firmware subnode is needed when the platform does not
-      have TrustZone.
-
-    properties:
-      iommus:
-        maxItems: 1
-
-    required:
-      - iommus
-
 required:
   - compatible
-  - reg
-  - interrupts
-  - power-domains
-  - clocks
-  - clock-names
   - iommus
-  - memory-region
   - video-decoder
   - video-encoder
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/clock/qcom,gcc-msm8916.h>
-
-        video-codec@1d00000 {
-                compatible = "qcom,msm8916-venus";
-                reg = <0x01d00000 0xff000>;
-                interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
-                        <&gcc GCC_VENUS0_AHB_CLK>,
-                        <&gcc GCC_VENUS0_AXI_CLK>;
-                clock-names = "core", "iface", "bus";
-                power-domains = <&gcc VENUS_GDSC>;
-                iommus = <&apps_iommu 5>;
-                memory-region = <&venus_mem>;
-
-                video-decoder {
-                        compatible = "venus-decoder";
-                };
-
-                video-encoder {
-                        compatible = "venus-encoder";
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8916.h>
+
+    video-codec@1d00000 {
+        compatible = "qcom,msm8916-venus";
+        reg = <0x01d00000 0xff000>;
+        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+                 <&gcc GCC_VENUS0_AHB_CLK>,
+                 <&gcc GCC_VENUS0_AXI_CLK>;
+        clock-names = "core", "iface", "bus";
+        power-domains = <&gcc VENUS_GDSC>;
+        iommus = <&apps_iommu 5>;
+        memory-region = <&venus_mem>;
+
+        video-decoder {
+            compatible = "venus-decoder";
+        };
+
+        video-encoder {
+            compatible = "venus-encoder";
         };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
index 38be41e932f0..8a10aa1cafc5 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
@@ -2,8 +2,8 @@
 
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,msm8996-camss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,msm8996-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm CAMSS ISP
 
@@ -105,10 +105,6 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 description:
                   An array of physical data lanes indexes.
@@ -121,7 +117,6 @@ properties:
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@1:
@@ -136,16 +131,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@2:
@@ -160,16 +150,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@3:
@@ -184,16 +169,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
   reg:
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
index 199f45217b4a..3a4d817e544e 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8996-venus.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,msm8996-venus.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,msm8996-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Venus video encode and decode accelerators
+title: Qualcomm MSM8996 Venus video encode and decode accelerators
 
 maintainers:
   - Stanimir Varbanov <stanimir.varbanov@linaro.org>
@@ -14,16 +13,13 @@ description: |
   The Venus IP is a video encode and decode accelerator present
   on Qualcomm platforms
 
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
 properties:
   compatible:
     const: qcom,msm8996-venus
 
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
   power-domains:
     maxItems: 1
 
@@ -37,12 +33,17 @@ properties:
       - const: bus
       - const: mbus
 
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: video-mem
+      - const: cpu-cfg
+
   iommus:
     maxItems: 20
 
-  memory-region:
-    maxItems: 1
-
   video-decoder:
     type: object
 
@@ -93,82 +94,62 @@ properties:
 
     additionalProperties: false
 
-  video-firmware:
-    type: object
-
-    description: |
-      Firmware subnode is needed when the platform does not
-      have TrustZone.
-
-    properties:
-      iommus:
-        maxItems: 1
-
-    required:
-      - iommus
-
 required:
   - compatible
-  - reg
-  - interrupts
-  - power-domains
-  - clocks
-  - clock-names
   - iommus
-  - memory-region
   - video-decoder
   - video-encoder
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
-
-        video-codec@c00000 {
-                compatible = "qcom,msm8996-venus";
-                reg = <0x00c00000 0xff000>;
-                interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&mmcc VIDEO_CORE_CLK>,
-                         <&mmcc VIDEO_AHB_CLK>,
-                         <&mmcc VIDEO_AXI_CLK>,
-                         <&mmcc VIDEO_MAXI_CLK>;
-                clock-names = "core", "iface", "bus", "mbus";
-                power-domains = <&mmcc VENUS_GDSC>;
-                iommus =  <&venus_smmu 0x00>,
-                          <&venus_smmu 0x01>,
-                          <&venus_smmu 0x0a>,
-                          <&venus_smmu 0x07>,
-                          <&venus_smmu 0x0e>,
-                          <&venus_smmu 0x0f>,
-                          <&venus_smmu 0x08>,
-                          <&venus_smmu 0x09>,
-                          <&venus_smmu 0x0b>,
-                          <&venus_smmu 0x0c>,
-                          <&venus_smmu 0x0d>,
-                          <&venus_smmu 0x10>,
-                          <&venus_smmu 0x11>,
-                          <&venus_smmu 0x21>,
-                          <&venus_smmu 0x28>,
-                          <&venus_smmu 0x29>,
-                          <&venus_smmu 0x2b>,
-                          <&venus_smmu 0x2c>,
-                          <&venus_smmu 0x2d>,
-                          <&venus_smmu 0x31>;
-                memory-region = <&venus_mem>;
-
-                video-decoder {
-                        compatible = "venus-decoder";
-                        clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
-                        clock-names = "core";
-                        power-domains = <&mmcc VENUS_CORE0_GDSC>;
-                };
-
-                video-encoder {
-                        compatible = "venus-encoder";
-                        clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
-                        clock-names = "core";
-                        power-domains = <&mmcc VENUS_CORE1_GDSC>;
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
+
+    video-codec@c00000 {
+        compatible = "qcom,msm8996-venus";
+        reg = <0x00c00000 0xff000>;
+        interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mmcc VIDEO_CORE_CLK>,
+                 <&mmcc VIDEO_AHB_CLK>,
+                 <&mmcc VIDEO_AXI_CLK>,
+                 <&mmcc VIDEO_MAXI_CLK>;
+        clock-names = "core", "iface", "bus", "mbus";
+        power-domains = <&mmcc VENUS_GDSC>;
+        iommus =  <&venus_smmu 0x00>,
+                  <&venus_smmu 0x01>,
+                  <&venus_smmu 0x0a>,
+                  <&venus_smmu 0x07>,
+                  <&venus_smmu 0x0e>,
+                  <&venus_smmu 0x0f>,
+                  <&venus_smmu 0x08>,
+                  <&venus_smmu 0x09>,
+                  <&venus_smmu 0x0b>,
+                  <&venus_smmu 0x0c>,
+                  <&venus_smmu 0x0d>,
+                  <&venus_smmu 0x10>,
+                  <&venus_smmu 0x11>,
+                  <&venus_smmu 0x21>,
+                  <&venus_smmu 0x28>,
+                  <&venus_smmu 0x29>,
+                  <&venus_smmu 0x2b>,
+                  <&venus_smmu 0x2c>,
+                  <&venus_smmu 0x2d>,
+                  <&venus_smmu 0x31>;
+        memory-region = <&venus_mem>;
+
+        video-decoder {
+            compatible = "venus-decoder";
+            clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+            clock-names = "core";
+            power-domains = <&mmcc VENUS_CORE0_GDSC>;
+        };
+
+        video-encoder {
+            compatible = "venus-encoder";
+            clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+            clock-names = "core";
+            power-domains = <&mmcc VENUS_CORE1_GDSC>;
         };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
index 90b4af2c9724..5cec1d077cda 100644
--- a/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sc7180-venus.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,sc7180-venus.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,sc7180-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Venus video encode and decode accelerators
+title: Qualcomm SC7180 Venus video encode and decode accelerators
 
 maintainers:
   - Stanimir Varbanov <stanimir.varbanov@linaro.org>
@@ -14,16 +13,13 @@ description: |
   The Venus IP is a video encode and decode accelerator present
   on Qualcomm platforms
 
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
 properties:
   compatible:
     const: qcom,sc7180-venus
 
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
   power-domains:
     minItems: 2
     maxItems: 3
@@ -60,6 +56,10 @@ properties:
       - const: video-mem
       - const: cpu-cfg
 
+  operating-points-v2: true
+  opp-table:
+    type: object
+
   video-decoder:
     type: object
 
@@ -84,62 +84,42 @@ properties:
 
     additionalProperties: false
 
-  video-firmware:
-    type: object
-
-    description: |
-      Firmware subnode is needed when the platform does not
-      have TrustZone.
-
-    properties:
-      iommus:
-        maxItems: 1
-
-    required:
-      - iommus
-
 required:
   - compatible
-  - reg
-  - interrupts
-  - power-domains
   - power-domain-names
-  - clocks
-  - clock-names
   - iommus
-  - memory-region
   - video-decoder
   - video-encoder
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/clock/qcom,videocc-sc7180.h>
-
-        venus: video-codec@aa00000 {
-                compatible = "qcom,sc7180-venus";
-                reg = <0x0aa00000 0xff000>;
-                interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-                power-domains = <&videocc VENUS_GDSC>,
-                                <&videocc VCODEC0_GDSC>;
-                power-domain-names = "venus", "vcodec0";
-                clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
-                         <&videocc VIDEO_CC_VENUS_AHB_CLK>,
-                         <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
-                         <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
-                         <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
-                clock-names = "core", "iface", "bus",
-                              "vcodec0_core", "vcodec0_bus";
-                iommus = <&apps_smmu 0x0c00 0x60>;
-                memory-region = <&venus_mem>;
-
-                video-decoder {
-                        compatible = "venus-decoder";
-                };
-
-                video-encoder {
-                        compatible = "venus-encoder";
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,videocc-sc7180.h>
+
+    venus: video-codec@aa00000 {
+        compatible = "qcom,sc7180-venus";
+        reg = <0x0aa00000 0xff000>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&videocc VENUS_GDSC>,
+                        <&videocc VCODEC0_GDSC>;
+        power-domain-names = "venus", "vcodec0";
+        clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+                 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+                 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+                 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+        clock-names = "core", "iface", "bus",
+                      "vcodec0_core", "vcodec0_bus";
+        iommus = <&apps_smmu 0x0c00 0x60>;
+        memory-region = <&venus_mem>;
+
+        video-decoder {
+            compatible = "venus-decoder";
+        };
+
+        video-encoder {
+            compatible = "venus-encoder";
         };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
new file mode 100644
index 000000000000..8f9b6433aeb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sc7280-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+
+description: |
+  The Venus Iris2 IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sc7280-venus
+
+  power-domains:
+    minItems: 2
+    maxItems: 3
+
+  power-domain-names:
+    minItems: 2
+    items:
+      - const: venus
+      - const: vcodec0
+      - const: cx
+
+  clocks:
+    maxItems: 5
+
+  clock-names:
+    items:
+      - const: core
+      - const: bus
+      - const: iface
+      - const: vcodec_core
+      - const: vcodec_bus
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: cpu-cfg
+      - const: video-mem
+
+  operating-points-v2: true
+  opp-table:
+    type: object
+
+  video-decoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  video-encoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - power-domain-names
+  - iommus
+  - video-decoder
+  - video-encoder
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,videocc-sc7280.h>
+    #include <dt-bindings/interconnect/qcom,sc7280.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    venus: video-codec@aa00000 {
+        compatible = "qcom,sc7280-venus";
+        reg = <0x0aa00000 0xd0600>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+        clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>,
+                 <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>,
+                 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                 <&videocc VIDEO_CC_MVS0_CORE_CLK>,
+                 <&videocc VIDEO_CC_MVS0_AXI_CLK>;
+        clock-names = "core", "bus", "iface",
+                      "vcodec_core", "vcodec_bus";
+
+        power-domains = <&videocc MVSC_GDSC>,
+                        <&videocc MVS0_GDSC>,
+                        <&rpmhpd SC7280_CX>;
+        power-domain-names = "venus", "vcodec0", "cx";
+
+        interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>,
+                        <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>;
+        interconnect-names = "cpu-cfg", "video-mem";
+
+        iommus = <&apps_smmu 0x2180 0x20>,
+                 <&apps_smmu 0x2184 0x20>;
+
+        memory-region = <&video_mem>;
+
+        video-decoder {
+            compatible = "venus-decoder";
+        };
+
+        video-encoder {
+            compatible = "venus-encoder";
+        };
+
+        video-firmware {
+            iommus = <&apps_smmu 0x21a2 0x0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
index 841a1aafdd13..0a109e126064 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
@@ -2,8 +2,8 @@
 
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,sdm660-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm CAMSS ISP
 
@@ -84,6 +84,13 @@ properties:
       - const: vfe0
       - const: vfe1
 
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    items:
+      - const: vfe-mem
+
   iommus:
     maxItems: 4
 
@@ -111,16 +118,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@1:
@@ -135,16 +137,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@2:
@@ -159,16 +156,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@3:
@@ -183,16 +175,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
   reg:
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml
new file mode 100644
index 000000000000..a51835b22045
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-venus.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sdm660-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM660 Venus video encode and decode accelerators
+
+maintainers:
+  - Stanimir Varbanov <stanimir.varbanov@linaro.org>
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm660-venus
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: core
+      - const: iface
+      - const: bus
+      - const: bus_throttle
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: cpu-cfg
+      - const: video-mem
+
+  iommus:
+    maxItems: 20
+
+  power-domains:
+    maxItems: 1
+
+  video-decoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-decoder
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: vcodec0_core
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+  video-encoder:
+    type: object
+
+    properties:
+      compatible:
+        const: venus-encoder
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: vcodec0_core
+
+      power-domains:
+        maxItems: 1
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - power-domains
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - iommus
+  - video-decoder
+  - video-encoder
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    video-codec@cc00000 {
+        compatible = "qcom,sdm660-venus";
+        reg = <0x0cc00000 0xff000>;
+        clocks = <&mmcc VIDEO_CORE_CLK>,
+                 <&mmcc VIDEO_AHB_CLK>,
+                 <&mmcc VIDEO_AXI_CLK>,
+                 <&mmcc THROTTLE_VIDEO_AXI_CLK>;
+        clock-names = "core", "iface", "bus", "bus_throttle";
+        interconnects = <&gnoc 0 &mnoc 13>,
+                        <&mnoc 4 &bimc 5>;
+        interconnect-names = "cpu-cfg", "video-mem";
+        interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+        iommus = <&mmss_smmu 0x400>,
+                 <&mmss_smmu 0x401>,
+                 <&mmss_smmu 0x40a>,
+                 <&mmss_smmu 0x407>,
+                 <&mmss_smmu 0x40e>,
+                 <&mmss_smmu 0x40f>,
+                 <&mmss_smmu 0x408>,
+                 <&mmss_smmu 0x409>,
+                 <&mmss_smmu 0x40b>,
+                 <&mmss_smmu 0x40c>,
+                 <&mmss_smmu 0x40d>,
+                 <&mmss_smmu 0x410>,
+                 <&mmss_smmu 0x421>,
+                 <&mmss_smmu 0x428>,
+                 <&mmss_smmu 0x429>,
+                 <&mmss_smmu 0x42b>,
+                 <&mmss_smmu 0x42c>,
+                 <&mmss_smmu 0x42d>,
+                 <&mmss_smmu 0x411>,
+                 <&mmss_smmu 0x431>;
+        memory-region = <&venus_region>;
+        power-domains = <&mmcc VENUS_GDSC>;
+
+        video-decoder {
+            compatible = "venus-decoder";
+            clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+            clock-names = "vcodec0_core";
+            power-domains = <&mmcc VENUS_CORE0_GDSC>;
+        };
+
+        video-encoder {
+            compatible = "venus-encoder";
+            clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+            clock-names = "vcodec0_core";
+            power-domains = <&mmcc VENUS_CORE0_GDSC>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
index 9ca5dfa7f226..1530ad0d80bd 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
@@ -2,8 +2,8 @@
 
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm CAMSS ISP
 
@@ -105,15 +105,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                maxItems: 1
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@1:
@@ -128,16 +124,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                items:
-                  - const: 7
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@2:
@@ -152,15 +143,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                maxItems: 1
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
       port@3:
@@ -175,15 +162,11 @@ properties:
             unevaluatedProperties: false
 
             properties:
-              clock-lanes:
-                maxItems: 1
-
               data-lanes:
                 minItems: 1
                 maxItems: 4
 
             required:
-              - clock-lanes
               - data-lanes
 
   reg:
@@ -203,9 +186,13 @@ properties:
       - const: vfe1
       - const: vfe_lite
 
-  vdda-supply:
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
     description:
-      Definition of the regulator used as analog power supply.
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
 
 required:
   - clock-names
@@ -217,7 +204,8 @@ required:
   - power-domains
   - reg
   - reg-names
-  - vdda-supply
+  - vdda-phy-supply
+  - vdda-pll-supply
 
 additionalProperties: false
 
@@ -361,7 +349,8 @@ examples:
           "vfe1",
           "vfe_lite";
 
-        vdda-supply = <&reg_2v8>;
+        vdda-phy-supply = <&vreg_l1a_0p875>;
+        vdda-pll-supply = <&vreg_l26a_1p2>;
 
         ports {
           #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
index 177bf81544b1..d5f80976f4cf 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus-v2.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,sdm845-venus-v2.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,sdm845-venus-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Venus video encode and decode accelerators
+title: Qualcomm SDM845 Venus v2 video encode and decode accelerators
 
 maintainers:
   - Stanimir Varbanov <stanimir.varbanov@linaro.org>
@@ -14,16 +13,13 @@ description: |
   The Venus IP is a video encode and decode accelerator present
   on Qualcomm platforms
 
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
 properties:
   compatible:
     const: qcom,sdm845-venus-v2
 
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
   power-domains:
     minItems: 3
     maxItems: 4
@@ -52,8 +48,9 @@ properties:
   iommus:
     maxItems: 2
 
-  memory-region:
-    maxItems: 1
+  operating-points-v2: true
+  opp-table:
+    type: object
 
   video-core0:
     type: object
@@ -79,67 +76,47 @@ properties:
 
     additionalProperties: false
 
-  video-firmware:
-    type: object
-
-    description: |
-      Firmware subnode is needed when the platform does not
-      have TrustZone.
-
-    properties:
-      iommus:
-        maxItems: 1
-
-    required:
-      - iommus
-
 required:
   - compatible
-  - reg
-  - interrupts
-  - power-domains
   - power-domain-names
-  - clocks
-  - clock-names
   - iommus
-  - memory-region
   - video-core0
   - video-core1
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/clock/qcom,videocc-sdm845.h>
-
-        video-codec@aa00000 {
-                compatible = "qcom,sdm845-venus-v2";
-                reg = <0x0aa00000 0xff000>;
-                interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
-                         <&videocc VIDEO_CC_VENUS_AHB_CLK>,
-                         <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
-                         <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
-                         <&videocc VIDEO_CC_VCODEC0_AXI_CLK>,
-                         <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
-                         <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
-                clock-names = "core", "iface", "bus",
-                              "vcodec0_core", "vcodec0_bus",
-                              "vcodec1_core", "vcodec1_bus";
-                power-domains = <&videocc VENUS_GDSC>,
-                                <&videocc VCODEC0_GDSC>,
-                                <&videocc VCODEC1_GDSC>;
-                power-domain-names = "venus", "vcodec0", "vcodec1";
-                iommus = <&apps_smmu 0x10a0 0x8>,
-                         <&apps_smmu 0x10b0 0x0>;
-                memory-region = <&venus_mem>;
-
-                video-core0 {
-                        compatible = "venus-decoder";
-                };
-
-                video-core1 {
-                        compatible = "venus-encoder";
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,videocc-sdm845.h>
+
+    video-codec@aa00000 {
+        compatible = "qcom,sdm845-venus-v2";
+        reg = <0x0aa00000 0xff000>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+                 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+                 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+                 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>,
+                 <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
+                 <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
+        clock-names = "core", "iface", "bus",
+                      "vcodec0_core", "vcodec0_bus",
+                      "vcodec1_core", "vcodec1_bus";
+        power-domains = <&videocc VENUS_GDSC>,
+                        <&videocc VCODEC0_GDSC>,
+                        <&videocc VCODEC1_GDSC>;
+        power-domain-names = "venus", "vcodec0", "vcodec1";
+        iommus = <&apps_smmu 0x10a0 0x8>,
+                 <&apps_smmu 0x10b0 0x0>;
+        memory-region = <&venus_mem>;
+
+        video-core0 {
+            compatible = "venus-decoder";
+        };
+
+        video-core1 {
+            compatible = "venus-encoder";
         };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
index 680f37726fdf..eabc0957b241 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-venus.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,sdm845-venus.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,sdm845-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Venus video encode and decode accelerators
+title: Qualcomm SDM845 Venus video encode and decode accelerators
 
 maintainers:
   - Stanimir Varbanov <stanimir.varbanov@linaro.org>
@@ -14,16 +13,13 @@ description: |
   The Venus IP is a video encode and decode accelerator present
   on Qualcomm platforms
 
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
 properties:
   compatible:
     const: qcom,sdm845-venus
 
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
   power-domains:
     maxItems: 1
 
@@ -39,9 +35,6 @@ properties:
   iommus:
     maxItems: 2
 
-  memory-region:
-    maxItems: 1
-
   video-core0:
     type: object
 
@@ -94,65 +87,45 @@ properties:
 
     additionalProperties: false
 
-  video-firmware:
-    type: object
-
-    description: |
-      Firmware subnode is needed when the platform does not
-      have TrustZone.
-
-    properties:
-      iommus:
-        maxItems: 1
-
-    required:
-      - iommus
-
 required:
   - compatible
-  - reg
-  - interrupts
-  - power-domains
-  - clocks
-  - clock-names
   - iommus
-  - memory-region
   - video-core0
   - video-core1
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/clock/qcom,videocc-sdm845.h>
-
-        video-codec@aa00000 {
-                compatible = "qcom,sdm845-venus";
-                reg = <0x0aa00000 0xff000>;
-                interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-                clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
-                         <&videocc VIDEO_CC_VENUS_AHB_CLK>,
-                         <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>;
-                clock-names = "core", "iface", "bus";
-                power-domains = <&videocc VENUS_GDSC>;
-                iommus = <&apps_smmu 0x10a0 0x8>,
-                         <&apps_smmu 0x10b0 0x0>;
-                memory-region = <&venus_mem>;
-
-                video-core0 {
-                        compatible = "venus-decoder";
-                        clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
-                                 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
-                        clock-names = "core", "bus";
-                        power-domains = <&videocc VCODEC0_GDSC>;
-                };
-
-                video-core1 {
-                        compatible = "venus-encoder";
-                        clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
-                                 <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
-                        clock-names = "core", "bus";
-                        power-domains = <&videocc VCODEC1_GDSC>;
-                };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,videocc-sdm845.h>
+
+    video-codec@aa00000 {
+        compatible = "qcom,sdm845-venus";
+        reg = <0x0aa00000 0xff000>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+                 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+                 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>;
+        clock-names = "core", "iface", "bus";
+        power-domains = <&videocc VENUS_GDSC>;
+        iommus = <&apps_smmu 0x10a0 0x8>,
+                 <&apps_smmu 0x10b0 0x0>;
+        memory-region = <&venus_mem>;
+
+        video-core0 {
+            compatible = "venus-decoder";
+            clocks = <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+                     <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+            clock-names = "core", "bus";
+            power-domains = <&videocc VCODEC0_GDSC>;
+        };
+
+        video-core1 {
+            compatible = "venus-encoder";
+            clocks = <&videocc VIDEO_CC_VCODEC1_CORE_CLK>,
+                     <&videocc VIDEO_CC_VCODEC1_AXI_CLK>;
+            clock-names = "core", "bus";
+            power-domains = <&videocc VCODEC1_GDSC>;
         };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
new file mode 100644
index 000000000000..fa5073c0fd1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
@@ -0,0 +1,463 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
+
+properties:
+  compatible:
+    const: qcom,sm8250-camss
+
+  clocks:
+    minItems: 37
+    maxItems: 37
+
+  clock-names:
+    items:
+      - const: cam_ahb_clk
+      - const: cam_hf_axi
+      - const: cam_sf_axi
+      - const: camnoc_axi
+      - const: camnoc_axi_src
+      - const: core_ahb
+      - const: cpas_ahb
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy4
+      - const: csiphy4_timer
+      - const: csiphy5
+      - const: csiphy5_timer
+      - const: slow_ahb_src
+      - const: vfe0_ahb
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe0_csid
+      - const: vfe0_areg
+      - const: vfe1_ahb
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe1_csid
+      - const: vfe1_areg
+      - const: vfe_lite_ahb
+      - const: vfe_lite_axi
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_csid
+
+  interrupts:
+    minItems: 14
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csid3
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  iommus:
+    minItems: 8
+    maxItems: 8
+
+  interconnects:
+    minItems: 4
+    maxItems: 4
+
+  interconnect-names:
+    items:
+      - const: cam_ahb
+      - const: cam_hf_0_mnoc
+      - const: cam_sf_0_mnoc
+      - const: cam_sf_icp_mnoc
+
+  power-domains:
+    items:
+      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    description:
+      CSI input ports.
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@2:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@3:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@4:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@5:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port for receiving CSI data.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              clock-lanes:
+                maxItems: 1
+
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+  reg:
+    minItems: 10
+    maxItems: 10
+
+  reg-names:
+    items:
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: csiphy4
+      - const: csiphy5
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite0
+      - const: vfe_lite1
+
+  vdda-phy-supply:
+    description:
+      Phandle to a regulator supply to PHY core block.
+
+  vdda-pll-supply:
+    description:
+      Phandle to 1.8V regulator supply to PHY refclk pll block.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interconnects
+  - interconnect-names
+  - interrupts
+  - interrupt-names
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,camcc-sm8250.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        camss: camss@ac6a000 {
+            compatible = "qcom,sm8250-camss";
+
+            reg = <0 0xac6a000 0 0x2000>,
+                  <0 0xac6c000 0 0x2000>,
+                  <0 0xac6e000 0 0x1000>,
+                  <0 0xac70000 0 0x1000>,
+                  <0 0xac72000 0 0x1000>,
+                  <0 0xac74000 0 0x1000>,
+                  <0 0xacb4000 0 0xd000>,
+                  <0 0xacc3000 0 0xd000>,
+                  <0 0xacd9000 0 0x2200>,
+                  <0 0xacdb200 0 0x2200>;
+            reg-names = "csiphy0",
+                        "csiphy1",
+                        "csiphy2",
+                        "csiphy3",
+                        "csiphy4",
+                        "csiphy5",
+                        "vfe0",
+                        "vfe1",
+                        "vfe_lite0",
+                        "vfe_lite1";
+
+            vdda-phy-supply = <&vreg_l5a_0p88>;
+            vdda-pll-supply = <&vreg_l9a_1p2>;
+
+            interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "csiphy0",
+                              "csiphy1",
+                              "csiphy2",
+                              "csiphy3",
+                              "csiphy4",
+                              "csiphy5",
+                              "csid0",
+                              "csid1",
+                              "csid2",
+                              "csid3",
+                              "vfe0",
+                              "vfe1",
+                              "vfe_lite0",
+                              "vfe_lite1";
+
+            power-domains = <&camcc IFE_0_GDSC>,
+                            <&camcc IFE_1_GDSC>,
+                            <&camcc TITAN_TOP_GDSC>;
+
+            clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+                     <&gcc GCC_CAMERA_HF_AXI_CLK>,
+                     <&gcc GCC_CAMERA_SF_AXI_CLK>,
+                     <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+                     <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>,
+                     <&camcc CAM_CC_CORE_AHB_CLK>,
+                     <&camcc CAM_CC_CPAS_AHB_CLK>,
+                     <&camcc CAM_CC_CSIPHY0_CLK>,
+                     <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY1_CLK>,
+                     <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY2_CLK>,
+                     <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY3_CLK>,
+                     <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY4_CLK>,
+                     <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+                     <&camcc CAM_CC_CSIPHY5_CLK>,
+                     <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+                     <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+                     <&camcc CAM_CC_IFE_0_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_0_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_0_CLK>,
+                     <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_0_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_0_AREG_CLK>,
+                     <&camcc CAM_CC_IFE_1_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_1_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_1_CLK>,
+                     <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_1_CSID_CLK>,
+                     <&camcc CAM_CC_IFE_1_AREG_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_AXI_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+                     <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+            clock-names = "cam_ahb_clk",
+                          "cam_hf_axi",
+                          "cam_sf_axi",
+                          "camnoc_axi",
+                          "camnoc_axi_src",
+                          "core_ahb",
+                          "cpas_ahb",
+                          "csiphy0",
+                          "csiphy0_timer",
+                          "csiphy1",
+                          "csiphy1_timer",
+                          "csiphy2",
+                          "csiphy2_timer",
+                          "csiphy3",
+                          "csiphy3_timer",
+                          "csiphy4",
+                          "csiphy4_timer",
+                          "csiphy5",
+                          "csiphy5_timer",
+                          "slow_ahb_src",
+                          "vfe0_ahb",
+                          "vfe0_axi",
+                          "vfe0",
+                          "vfe0_cphy_rx",
+                          "vfe0_csid",
+                          "vfe0_areg",
+                          "vfe1_ahb",
+                          "vfe1_axi",
+                          "vfe1",
+                          "vfe1_cphy_rx",
+                          "vfe1_csid",
+                          "vfe1_areg",
+                          "vfe_lite_ahb",
+                          "vfe_lite_axi",
+                          "vfe_lite",
+                          "vfe_lite_cphy_rx",
+                          "vfe_lite_csid";
+
+            iommus = <&apps_smmu 0x800 0x400>,
+                     <&apps_smmu 0x801 0x400>,
+                     <&apps_smmu 0x840 0x400>,
+                     <&apps_smmu 0x841 0x400>,
+                     <&apps_smmu 0xC00 0x400>,
+                     <&apps_smmu 0xC01 0x400>,
+                     <&apps_smmu 0xC40 0x400>,
+                     <&apps_smmu 0xC41 0x400>;
+
+            interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_CAMERA_CFG>,
+                            <&mmss_noc MASTER_CAMNOC_HF &mc_virt SLAVE_EBI_CH0>,
+                            <&mmss_noc MASTER_CAMNOC_SF &mc_virt SLAVE_EBI_CH0>,
+                            <&mmss_noc MASTER_CAMNOC_ICP &mc_virt SLAVE_EBI_CH0>;
+            interconnect-names = "cam_ahb",
+                                 "cam_hf_0_mnoc",
+                                 "cam_sf_0_mnoc",
+                                 "cam_sf_icp_mnoc";
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
index ebf8f3d866a5..7915dcd2d99f 100644
--- a/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/qcom,sm8250-venus.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/qcom,sm8250-venus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Venus video encode and decode accelerators
+title: Qualcomm SM8250 Venus video encode and decode accelerators
 
 maintainers:
   - Stanimir Varbanov <stanimir.varbanov@linaro.org>
@@ -14,16 +13,13 @@ description: |
   The Venus IP is a video encode and decode accelerator present
   on Qualcomm platforms
 
+allOf:
+  - $ref: qcom,venus-common.yaml#
+
 properties:
   compatible:
     const: qcom,sm8250-venus
 
-  reg:
-    maxItems: 1
-
-  interrupts:
-    maxItems: 1
-
   power-domains:
     minItems: 2
     maxItems: 3
@@ -47,9 +43,6 @@ properties:
   iommus:
     maxItems: 1
 
-  memory-region:
-    maxItems: 1
-
   interconnects:
     maxItems: 2
 
@@ -58,6 +51,10 @@ properties:
       - const: cpu-cfg
       - const: video-mem
 
+  operating-points-v2: true
+  opp-table:
+    type: object
+
   resets:
     maxItems: 2
 
@@ -90,77 +87,57 @@ properties:
 
     additionalProperties: false
 
-  video-firmware:
-    type: object
-
-    description: |
-      Firmware subnode is needed when the platform does not
-      have TrustZone.
-
-    properties:
-      iommus:
-        maxItems: 1
-
-    required:
-      - iommus
-
 required:
   - compatible
-  - reg
-  - interrupts
-  - power-domains
   - power-domain-names
-  - clocks
-  - clock-names
   - interconnects
   - interconnect-names
   - iommus
-  - memory-region
   - resets
   - reset-names
   - video-decoder
   - video-encoder
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        #include <dt-bindings/clock/qcom,videocc-sm8250.h>
-        #include <dt-bindings/interconnect/qcom,sm8250.h>
-        #include <dt-bindings/clock/qcom,gcc-sm8250.h>
-        #include <dt-bindings/power/qcom-rpmpd.h>
-
-        venus: video-codec@aa00000 {
-            compatible = "qcom,sm8250-venus";
-            reg = <0x0aa00000 0xff000>;
-            interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-            power-domains = <&videocc MVS0C_GDSC>,
-                            <&videocc MVS0_GDSC>,
-                            <&rpmhpd SM8250_MX>;
-            power-domain-names = "venus", "vcodec0", "mx";
-
-            clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
-                     <&videocc VIDEO_CC_MVS0C_CLK>,
-                     <&videocc VIDEO_CC_MVS0_CLK>;
-            clock-names = "iface", "core", "vcodec0_core";
-
-            interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>,
-                            <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>;
-            interconnect-names = "cpu-cfg", "video-mem";
-
-            iommus = <&apps_smmu 0x2100 0x0400>;
-            memory-region = <&video_mem>;
-
-            resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
-                     <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
-            reset-names = "bus", "core";
-
-            video-decoder {
-                compatible = "venus-decoder";
-            };
-
-            video-encoder {
-                compatible = "venus-encoder";
-            };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,videocc-sm8250.h>
+    #include <dt-bindings/interconnect/qcom,sm8250.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    venus: video-codec@aa00000 {
+        compatible = "qcom,sm8250-venus";
+        reg = <0x0aa00000 0xff000>;
+        interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&videocc MVS0C_GDSC>,
+                        <&videocc MVS0_GDSC>,
+                        <&rpmhpd SM8250_MX>;
+        power-domain-names = "venus", "vcodec0", "mx";
+
+        clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+                 <&videocc VIDEO_CC_MVS0C_CLK>,
+                 <&videocc VIDEO_CC_MVS0_CLK>;
+        clock-names = "iface", "core", "vcodec0_core";
+
+        interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_VENUS_CFG>,
+                        <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI_CH0>;
+        interconnect-names = "cpu-cfg", "video-mem";
+
+        iommus = <&apps_smmu 0x2100 0x0400>;
+        memory-region = <&video_mem>;
+
+        resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
+                 <&videocc VIDEO_CC_MVS0C_CLK_ARES>;
+        reset-names = "bus", "core";
+
+        video-decoder {
+            compatible = "venus-decoder";
+        };
+
+        video-encoder {
+            compatible = "venus-encoder";
         };
+    };
diff --git a/Documentation/devicetree/bindings/media/qcom,venus-common.yaml b/Documentation/devicetree/bindings/media/qcom,venus-common.yaml
new file mode 100644
index 000000000000..3153d91f9d18
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,venus-common.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/qcom,venus-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SoC Venus Video Encode and Decode Accelerators Common Properties
+
+maintainers:
+  - Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
+  - Vikash Garodia <quic_vgarodia@quicinc.com>
+
+description: |
+  The Venus IP is a video encode and decode accelerator present
+  on Qualcomm platforms
+
+properties:
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 7
+
+  clock-names:
+    minItems: 3
+    maxItems: 7
+
+  firmware-name:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 20
+
+  memory-region:
+    maxItems: 1
+
+  power-domains:
+    minItems: 1
+    maxItems: 4
+
+  power-domain-names:
+    minItems: 1
+    maxItems: 4
+
+  video-firmware:
+    type: object
+    additionalProperties: false
+
+    description: |
+      Firmware subnode is needed when the platform does not
+      have TrustZone.
+
+    properties:
+      iommus:
+        maxItems: 1
+
+    required:
+      - iommus
+
+required:
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - memory-region
+  - power-domains
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml
index d4c541c4b164..7bbe580c80f7 100644
--- a/Documentation/devicetree/bindings/media/rc.yaml
+++ b/Documentation/devicetree/bindings/media/rc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/rc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic Infrared Remote Controller Device Tree Bindings
+title: Generic Infrared Remote Controller
 
 maintainers:
   - Mauro Carvalho Chehab <mchehab@kernel.org>
@@ -12,13 +12,13 @@ maintainers:
 
 properties:
   $nodename:
-    pattern: "^ir(@[a-f0-9]+)?$"
+    pattern: "^ir(-receiver)?(@[a-f0-9]+)?$"
 
   linux,rc-map-name:
     description:
       Specifies the scancode/key mapping table defined in-kernel for
       the remote controller.
-    $ref: '/schemas/types.yaml#/definitions/string'
+    $ref: /schemas/types.yaml#/definitions/string
     enum:
       - rc-adstech-dvb-t-pci
       - rc-alink-dtu-m
@@ -39,6 +39,7 @@ properties:
       - rc-avertv-303
       - rc-azurewave-ad-tu700
       - rc-beelink-gs1
+      - rc-beelink-mxiii
       - rc-behold
       - rc-behold-columbus
       - rc-budget-ci-old
@@ -55,6 +56,7 @@ properties:
       - rc-dm1105-nec
       - rc-dntv-live-dvb-t
       - rc-dntv-live-dvbt-pro
+      - rc-dreambox
       - rc-dtt200u
       - rc-dvbsky
       - rc-dvico-mce
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
index 50e0740af15a..d527fc42c3fd 100644
--- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/renesas,ceu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Renesas Capture Engine Unit (CEU) Bindings
+title: Renesas Capture Engine Unit (CEU)
 
 maintainers:
   - Jacopo Mondi <jacopo+renesas@jmondi.org>
diff --git a/Documentation/devicetree/bindings/media/renesas,csi2.yaml b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
index 23703b767f5b..977ab188d654 100644
--- a/Documentation/devicetree/bindings/media/renesas,csi2.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,csi2.yaml
@@ -30,6 +30,8 @@ properties:
           - renesas,r8a77970-csi2 # R-Car V3M
           - renesas,r8a77980-csi2 # R-Car V3H
           - renesas,r8a77990-csi2 # R-Car E3
+          - renesas,r8a779a0-csi2 # R-Car V3U
+          - renesas,r8a779g0-csi2 # R-Car V4H
 
   reg:
     maxItems: 1
@@ -66,7 +68,10 @@ properties:
                 maxItems: 1
 
               data-lanes:
-                maxItems: 1
+                minItems: 1
+                maxItems: 4
+                items:
+                  maximum: 4
 
             required:
               - clock-lanes
diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.yaml b/Documentation/devicetree/bindings/media/renesas,fcp.yaml
index 43f2fed8cd33..c6abe719881b 100644
--- a/Documentation/devicetree/bindings/media/renesas,fcp.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,fcp.yaml
@@ -21,15 +21,22 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - renesas,fcpv # FCP for VSP
-      - renesas,fcpf # FCP for FDP
+    oneOf:
+      - enum:
+          - renesas,fcpv # FCP for VSP
+          - renesas,fcpf # FCP for FDP
+      - items:
+          - enum:
+              - renesas,r9a07g044-fcpvd # RZ/G2{L,LC}
+              - renesas,r9a07g054-fcpvd # RZ/V2L
+          - const: renesas,fcpv         # Generic FCP for VSP fallback
 
   reg:
     maxItems: 1
 
-  clocks:
-    maxItems: 1
+  clocks: true
+
+  clock-names: true
 
   iommus:
     maxItems: 1
@@ -49,6 +56,34 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,r9a07g044-fcpvd
+              - renesas,r9a07g054-fcpvd
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Main clock
+            - description: Register access clock
+            - description: Video clock
+        clock-names:
+          items:
+            - const: aclk
+            - const: pclk
+            - const: vclk
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names: false
+
 examples:
   # R8A7795 (R-Car H3) FCP for VSP-D1
   - |
diff --git a/Documentation/devicetree/bindings/media/renesas,imr.txt b/Documentation/devicetree/bindings/media/renesas,imr.txt
deleted file mode 100644
index b0614153ed36..000000000000
--- a/Documentation/devicetree/bindings/media/renesas,imr.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-Renesas R-Car Image Renderer (Distortion Correction Engine)
------------------------------------------------------------
-
-The image renderer, or the distortion correction engine, is a drawing processor
-with a simple instruction system capable of referencing video capture data or
-data in an external memory as 2D texture data and performing texture mapping
-and drawing with respect to any shape that is split into triangular objects.
-
-Required properties:
-
-- compatible: "renesas,<soctype>-imr-lx4", "renesas,imr-lx4" as a fallback for
-  the image renderer light extended 4 (IMR-LX4) found in the R-Car gen3 SoCs,
-  where the examples with <soctype> are:
-  - "renesas,r8a7795-imr-lx4" for R-Car H3,
-  - "renesas,r8a7796-imr-lx4" for R-Car M3-W.
-- reg: offset and length of the register block;
-- interrupts: single interrupt specifier;
-- clocks: single clock phandle/specifier pair;
-- power-domains: power domain phandle/specifier pair;
-- resets: reset phandle/specifier pair.
-
-Example:
-
-	imr-lx4@fe860000 {
-		compatible = "renesas,r8a7795-imr-lx4", "renesas,imr-lx4";
-		reg = <0 0xfe860000 0 0x2000>;
-		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 823>;
-		power-domains = <&sysc R8A7795_PD_A3VC>;
-		resets = <&cpg 823>;
-	};
diff --git a/Documentation/devicetree/bindings/media/renesas,imr.yaml b/Documentation/devicetree/bindings/media/renesas,imr.yaml
new file mode 100644
index 000000000000..512f57417fd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,imr.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,imr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Image Renderer (Distortion Correction Engine)
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+description: |
+  The image renderer, or the distortion correction engine, is a drawing
+  processor with a simple instruction system capable of referencing video
+  capture data or data in an external memory as 2D texture data and performing
+  texture mapping and drawing with respect to any shape that is split into
+  triangular objects.
+
+  The image renderer light extended 4 (IMR-LX4) is found in R-Car Gen3 SoCs.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r8a7795-imr-lx4 # R-Car H3
+          - renesas,r8a7796-imr-lx4 # R-Car M3-W
+      - const: renesas,imr-lx4      # R-Car Gen3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+
+    imr-lx4@fe860000 {
+            compatible = "renesas,r8a7795-imr-lx4", "renesas,imr-lx4";
+            reg = <0xfe860000 0x2000>;
+            interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 823>;
+            power-domains = <&sysc R8A7795_PD_A3VC>;
+            resets = <&cpg 823>;
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,isp.yaml b/Documentation/devicetree/bindings/media/renesas,isp.yaml
index 514857d36f6b..33650a1ea034 100644
--- a/Documentation/devicetree/bindings/media/renesas,isp.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,isp.yaml
@@ -21,6 +21,7 @@ properties:
     items:
       - enum:
           - renesas,r8a779a0-isp # V3U
+          - renesas,r8a779g0-isp # V4H
   reg:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/media/renesas,jpu.txt b/Documentation/devicetree/bindings/media/renesas,jpu.txt
deleted file mode 100644
index d3436e5190f9..000000000000
--- a/Documentation/devicetree/bindings/media/renesas,jpu.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-* Renesas JPEG Processing Unit
-
-The JPEG processing unit (JPU) incorporates the JPEG codec with an encoding
-and decoding function conforming to the JPEG baseline process, so that the JPU
-can encode image data and decode JPEG data quickly.
-
-Required properties:
-- compatible: "renesas,jpu-<soctype>", "renesas,rcar-gen2-jpu" as fallback.
-	Examples with soctypes are:
-	  - "renesas,jpu-r8a7790" for R-Car H2
-	  - "renesas,jpu-r8a7791" for R-Car M2-W
-	  - "renesas,jpu-r8a7792" for R-Car V2H
-	  - "renesas,jpu-r8a7793" for R-Car M2-N
-
-  - reg: Base address and length of the registers block for the JPU.
-  - interrupts: JPU interrupt specifier.
-  - clocks: A phandle + clock-specifier pair for the JPU functional clock.
-
-Example: R8A7790 (R-Car H2) JPU node
-	jpeg-codec@fe980000 {
-		compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu";
-		reg = <0 0xfe980000 0 0x10300>;
-		interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp1_clks R8A7790_CLK_JPU>;
-	};
diff --git a/Documentation/devicetree/bindings/media/renesas,jpu.yaml b/Documentation/devicetree/bindings/media/renesas,jpu.yaml
new file mode 100644
index 000000000000..2f55968e864f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,jpu.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,jpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas JPEG Processing Unit
+
+maintainers:
+  - Mikhail Ulyanov <mikhail.ulyanov@cogentembedded.com>
+
+description:
+  The JPEG processing unit (JPU) incorporates the JPEG codec with an encoding
+  and decoding function conforming to the JPEG baseline process, so that the
+  JPU can encode image data and decode JPEG data quickly.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,jpu-r8a7790      # R-Car H2
+          - renesas,jpu-r8a7791      # R-Car M2-W
+          - renesas,jpu-r8a7792      # R-Car V2H
+          - renesas,jpu-r8a7793      # R-Car M2-N
+      - const: renesas,rcar-gen2-jpu # R-Car Gen2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    jpeg-codec@fe980000 {
+            compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu";
+            reg = <0xfe980000 0x10300>;
+            interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cpg CPG_MOD 106>;
+            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+            resets = <&cpg 106>;
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
new file mode 100644
index 000000000000..7dde7967c886
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,rzg2l-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) Camera Data Receiving Unit (CRU) Image processing
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The CRU image processing module is a data conversion module equipped with pixel
+  color space conversion, LUT, pixel format conversion, etc. An MIPI CSI-2 input and
+  parallel (including ITU-R BT.656) input are provided as the image sensor interface.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-cru       # RZ/G2{L,LC}
+          - renesas,r9a07g054-cru       # RZ/V2L
+      - const: renesas,rzg2l-cru
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: image_conv
+      - const: image_conv_err
+      - const: axi_mst_err
+
+  clocks:
+    items:
+      - description: CRU Main clock
+      - description: CRU Register access clock
+      - description: CRU image transfer clock
+
+  clock-names:
+    items:
+      - const: video
+      - const: apb
+      - const: axi
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CRU_PRESETN reset terminal
+      - description: CRU_ARESETN reset terminal
+
+  reset-names:
+    items:
+      - const: presetn
+      - const: aresetn
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing a parallel input source.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              hsync-active: true
+              vsync-active: true
+              bus-width: true
+              data-shift: true
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Input port node, describing the Image Processing module connected to the
+          CSI-2 receiver.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  # Device node example with CSI-2
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    cru: video@10830000 {
+        compatible = "renesas,r9a07g044-cru", "renesas,rzg2l-cru";
+        reg = <0x10830000 0x400>;
+        interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "image_conv", "image_conv_err", "axi_mst_err";
+        clocks = <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_ACLK>;
+        clock-names = "video", "apb", "axi";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_CRU_PRESETN>,
+                 <&cpg R9A07G044_CRU_ARESETN>;
+        reset-names = "presetn", "aresetn";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+
+                cru_parallel_in: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint= <&ov5642>;
+                    hsync-active = <1>;
+                    vsync-active = <1>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+
+                cru_csi_in: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint= <&csi_cru_in>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
new file mode 100644
index 000000000000..67eea2ac1d22
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-csi2.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/renesas,rzg2l-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L (and alike SoC's) MIPI CSI-2 receiver
+
+maintainers:
+  - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+  The CSI-2 receiver device provides MIPI CSI-2 capabilities for the Renesas RZ/G2L
+  (and alike SoCs). MIPI CSI-2 is part of the CRU block which is used in conjunction
+  with the Image Processing module, which provides the video capture capabilities.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-csi2       # RZ/G2{L,LC}
+          - renesas,r9a07g054-csi2       # RZ/V2L
+      - const: renesas,rzg2l-csi2
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Internal clock for connecting CRU and MIPI
+      - description: CRU Main clock
+      - description: CRU Register access clock
+
+  clock-names:
+    items:
+      - const: system
+      - const: video
+      - const: apb
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CRU_PRESETN reset terminal
+      - description: CRU_CMN_RSTB reset terminal
+
+  reset-names:
+    items:
+      - const: presetn
+      - const: cmn-rstb
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                maxItems: 4
+                items:
+                  maximum: 4
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node, Image Processing block connected to the CSI-2 receiver.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - reset-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    csi: csi@10830400 {
+        compatible = "renesas,r9a07g044-csi2", "renesas,rzg2l-csi2";
+        reg = <0x10830400 0xfc00>;
+        interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD R9A07G044_CRU_SYSCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_CRU_PCLK>;
+        clock-names = "system", "video", "apb";
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_CRU_PRESETN>,
+                 <&cpg R9A07G044_CRU_CMN_RSTB>;
+        reset-names = "presetn", "cmn-rstb";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                csi2_in: endpoint {
+                    clock-lanes = <0>;
+                    data-lanes = <1 2>;
+                    remote-endpoint = <&ov5645_ep>;
+                };
+            };
+
+            port@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                reg = <1>;
+
+                csi2cru: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&crucsi2>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
index c0442e79cbb4..91e8f368fb52 100644
--- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -53,6 +53,7 @@ properties:
               - renesas,vin-r8a77990 # R-Car E3
               - renesas,vin-r8a77995 # R-Car D3
               - renesas,vin-r8a779a0 # R-Car V3U
+              - renesas,vin-r8a779g0 # R-Car V4H
 
   reg:
     maxItems: 1
@@ -69,7 +70,7 @@ properties:
   resets:
     maxItems: 1
 
-  #The per-board settings for Gen2 and RZ/G1 platforms:
+  # The per-board settings for Gen2 and RZ/G1 platforms:
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
     unevaluatedProperties: false
@@ -108,7 +109,7 @@ properties:
 
           data-active: true
 
-  #The per-board settings for Gen3 and RZ/G2 platforms:
+  # The per-board settings for Gen3 and RZ/G2 platforms:
   renesas,id:
     description: VIN channel number
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
index 990e9c1dbc43..3265e922647c 100644
--- a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml
@@ -16,9 +16,15 @@ description:
 
 properties:
   compatible:
-    enum:
-      - renesas,vsp1 # R-Car Gen2 and RZ/G1
-      - renesas,vsp2 # R-Car Gen3 and RZ/G2
+    oneOf:
+      - enum:
+          - renesas,r9a07g044-vsp2 # RZ/G2L
+          - renesas,vsp1 # R-Car Gen2 and RZ/G1
+          - renesas,vsp2 # R-Car Gen3 and RZ/G2
+      - items:
+          - enum:
+              - renesas,r9a07g054-vsp2    # RZ/V2L
+          - const: renesas,r9a07g044-vsp2 # RZ/G2L fallback
 
   reg:
     maxItems: 1
@@ -26,8 +32,8 @@ properties:
   interrupts:
     maxItems: 1
 
-  clocks:
-    maxItems: 1
+  clocks: true
+  clock-names: true
 
   power-domains:
     maxItems: 1
@@ -50,17 +56,43 @@ required:
 
 additionalProperties: false
 
-if:
-  properties:
-    compatible:
-      items:
-        - const: renesas,vsp1
-then:
-  properties:
-    renesas,fcp: false
-else:
-  required:
-    - renesas,fcp
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,vsp1
+    then:
+      properties:
+        renesas,fcp: false
+    else:
+      required:
+        - renesas,fcp
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,r9a07g044-vsp2
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Main clock
+            - description: Register access clock
+            - description: Video clock
+        clock-names:
+          items:
+            - const: aclk
+            - const: pclk
+            - const: vclk
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names: false
 
 examples:
   # R8A7790 (R-Car H2) VSP1-S
diff --git a/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml
new file mode 100644
index 000000000000..9d90d8d0565a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/rockchip,rk3568-vepu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hantro G1 VPU encoders implemented on Rockchip SoCs
+
+maintainers:
+  - Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
+
+description:
+  Hantro G1 video encode-only accelerators present on Rockchip SoCs.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3568-vepu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: hclk
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3568-power.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        vepu: video-codec@fdee0000 {
+            compatible = "rockchip,rk3568-vepu";
+            reg = <0x0 0xfdee0000 0x0 0x800>;
+            interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cru ACLK_JENC>, <&cru HCLK_JENC>;
+            clock-names = "aclk", "hclk";
+            iommus = <&vepu_mmu>;
+            power-domains = <&power RK3568_PD_RGA>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
index 089f11d21b25..08b02ec16755 100644
--- a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/rockchip,vdec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip Video Decoder (VDec) Device Tree Bindings
+title: Rockchip Video Decoder (VDec)
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
@@ -18,7 +18,9 @@ properties:
     oneOf:
       - const: rockchip,rk3399-vdec
       - items:
-          - const: rockchip,rk3228-vdec
+          - enum:
+              - rockchip,rk3228-vdec
+              - rockchip,rk3328-vdec
           - const: rockchip,rk3399-vdec
 
   reg:
diff --git a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
index a6b1eff879ed..0bad7e640148 100644
--- a/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-isp1.yaml
@@ -15,13 +15,22 @@ description: |
 
 properties:
   compatible:
-    const: rockchip,rk3399-cif-isp
+    enum:
+      - rockchip,px30-cif-isp
+      - rockchip,rk3399-cif-isp
 
   reg:
     maxItems: 1
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: isp
+      - const: mi
+      - const: mipi
 
   clocks:
     minItems: 3
@@ -41,7 +50,7 @@ properties:
       - const: aclk
       - const: hclk
       # only for isp1
-      - const: pclk_isp
+      - const: pclk
 
   iommus:
     maxItems: 1
@@ -75,8 +84,27 @@ properties:
                 minItems: 1
                 maxItems: 4
 
-    required:
-      - port@0
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: connection point for input on the parallel interface
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+        required:
+          - bus-type
+
+    anyOf:
+      - required:
+          - port@0
+      - required:
+          - port@1
 
 required:
   - compatible
@@ -90,19 +118,29 @@ required:
   - power-domains
   - ports
 
-if:
-  properties:
-    compatible:
-      contains:
-        const: rockchip,rk3399-cif-isp
-then:
-  properties:
-    clocks:
-      minItems: 3
-      maxItems: 4
-    clock-names:
-      minItems: 3
-      maxItems: 4
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-cif-isp
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 4
+        clock-names:
+          minItems: 3
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-cif-isp
+    then:
+      required:
+        - interrupt-names
 
 additionalProperties: false
 
@@ -174,12 +212,82 @@ examples:
                 compatible = "ovti,ov2685";
                 reg = <0x3c>;
 
-                  port {
-                      ucam_out: endpoint {
-                          remote-endpoint = <&mipi_in_ucam>;
-                          data-lanes = <1>;
-                      };
-                  };
+                clocks = <&cru SCLK_TESTCLKOUT1>;
+                clock-names = "xvclk";
+
+                avdd-supply = <&pp2800_cam>;
+                dovdd-supply = <&pp1800>;
+                dvdd-supply = <&pp1800>;
+
+                port {
+                    ucam_out: endpoint {
+                        remote-endpoint = <&mipi_in_ucam>;
+                        data-lanes = <1>;
+                    };
+                };
+            };
+        };
+    };
+
+  - |
+
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/px30-power.h>
+
+    parent1: parent {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        isp: isp@ff4a0000 {
+            compatible = "rockchip,px30-cif-isp";
+            reg = <0x0 0xff4a0000 0x0 0x8000>;
+            interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "isp", "mi", "mipi";
+            clocks = <&cru SCLK_ISP0>,
+                     <&cru ACLK_ISP0_WRAPPER>,
+                     <&cru HCLK_ISP0_WRAPPER>,
+                     <&cru PCLK_ISP1_WRAPPER>;
+            clock-names = "isp", "aclk", "hclk", "pclk";
+            iommus = <&isp_mmu>;
+            phys = <&csi_dphy>;
+            phy-names = "dphy";
+            power-domains = <&power PX30_PD_VI>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    mipi_in_ucam1: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&ucam1_out>;
+                        data-lanes = <1 2>;
+                    };
+                };
+            };
+        };
+
+        i2c2: i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ov5695: camera@36 {
+                compatible = "ovti,ov5647";
+                reg = <0x36>;
+                clocks = <&cru SCLK_CIF_OUT>;
+
+                port {
+                    ucam1_out: endpoint {
+                        remote-endpoint = <&mipi_in_ucam1>;
+                        data-lanes = <1 2>;
+                    };
+                };
             };
         };
     };
diff --git a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
index bacb60a34989..ee622a8ee1cc 100644
--- a/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
+++ b/Documentation/devicetree/bindings/media/rockchip-vpu.yaml
@@ -2,8 +2,8 @@
 
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/media/rockchip-vpu.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/media/rockchip-vpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Hantro G1 VPU codecs implemented on Rockchip SoCs
 
@@ -23,6 +23,7 @@ properties:
           - rockchip,rk3328-vpu
           - rockchip,rk3399-vpu
           - rockchip,px30-vpu
+          - rockchip,rk3568-vpu
       - items:
           - const: rockchip,rk3188-vpu
           - const: rockchip,rk3066-vpu
diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt
deleted file mode 100644
index e847291d4aff..000000000000
--- a/Documentation/devicetree/bindings/media/s5p-cec.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Samsung HDMI CEC driver
-
-The HDMI CEC module is present is Samsung SoCs and its purpose is to
-handle communication between HDMI connected devices over the CEC bus.
-
-Required properties:
-  - compatible : value should be following
-	"samsung,s5p-cec"
-
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-
-  - interrupts : HDMI CEC interrupt number to the CPU.
-  - clocks : from common clock binding: handle to HDMI CEC clock.
-  - clock-names : from common clock binding: must contain "hdmicec",
-		  corresponding to entry in the clocks property.
-  - samsung,syscon-phandle - phandle to the PMU system controller
-  - hdmi-phandle - phandle to the HDMI controller, see also cec.txt.
-
-Optional:
-  - needs-hpd : if present the CEC support is only available when the HPD
-		is high. See cec.txt for more details.
-
-Example:
-
-hdmicec: cec@100b0000 {
-	compatible = "samsung,s5p-cec";
-	reg = <0x100B0000 0x200>;
-	interrupts = <0 114 0>;
-	clocks = <&clock CLK_HDMI_CEC>;
-	clock-names = "hdmicec";
-	samsung,syscon-phandle = <&pmu_system_controller>;
-	hdmi-phandle = <&hdmi>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_cec>;
-};
diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
index aa54c8159d9f..8eb90c043d5d 100644
--- a/Documentation/devicetree/bindings/media/s5p-mfc.txt
+++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
@@ -10,10 +10,12 @@ Required properties:
   - compatible : value should be either one among the following
 	(a) "samsung,mfc-v5" for MFC v5 present in Exynos4 SoCs
 	(b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs
-	(c) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC
-	(d) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC
-	(e) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC
-	(f) "samsung,mfc-v10" for MFC v10 present in Exynos7880 SoC
+	(c) "samsung,exynos3250-mfc", "samsung,mfc-v7" for MFC v7
+	     present in Exynos3250 SoC
+	(d) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC
+	(e) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC
+	(f) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC
+	(g) "samsung,mfc-v10" for MFC v10 present in Exynos7880 SoC
 
   - reg : Physical base address of the IP registers and length of memory
 	  mapped region.
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
new file mode 100644
index 000000000000..dd6cc7ac1f7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4210-csis.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-csis
+      - samsung,exynos4210-csis
+      - samsung,exynos4212-csis
+      - samsung,exynos5250-csis
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2, 4]
+    description:
+      Number of data lines supported.
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: csis
+      - const: sclk_csis
+
+  clock-frequency:
+    default: 166000000
+    description:
+      The IP's main (system bus) clock frequency in Hz.
+
+  interrupts:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: csis
+
+  power-domains:
+    maxItems: 1
+
+  vddio-supply:
+    description: MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V).
+
+  vddcore-supply:
+    description: MIPI CSIS Core voltage supply (e.g. 1.1V).
+
+patternProperties:
+  "^port@[34]$":
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description:
+      Camera input port.
+
+    properties:
+      reg:
+        enum: [3, 4]
+
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 4
+
+          samsung,csis-hs-settle:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: Differential receiver (HS-RX) settle time.
+
+          samsung,csis-wclk:
+            type: boolean
+            description:
+              CSI-2 wrapper clock selection. If this property is present external clock
+              from CMU will be used, or the bus clock if it's not specified.
+
+        required:
+          - data-lanes
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - bus-width
+  - clocks
+  - clock-names
+  - interrupts
+  - vddio-supply
+  - vddcore-supply
+
+anyOf:
+  - required:
+      - port@3
+  - required:
+      - port@4
+
+allOf:
+  - if:
+      required:
+        - samsung,isp-wb
+    then:
+      required:
+        - samsung,sysreg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    csis@11890000 {
+        compatible = "samsung,exynos4210-csis";
+        reg = <0x11890000 0x4000>;
+        clocks = <&clock CLK_CSIS1>,
+                 <&clock CLK_SCLK_CSIS1>;
+        clock-names = "csis", "sclk_csis";
+        assigned-clocks = <&clock CLK_MOUT_CSIS1>,
+                          <&clock CLK_SCLK_CSIS1>;
+        assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+        assigned-clock-rates = <0>, <176000000>;
+
+        interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+
+        bus-width = <2>;
+        power-domains = <&pd_cam>;
+        phys = <&mipi_phy 2>;
+        phy-names = "csis";
+
+        vddcore-supply = <&ldo8_reg>;
+        vddio-supply = <&ldo10_reg>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Camera D (4) MIPI CSI-2 (CSIS1) */
+        port@4 {
+            reg = <4>;
+
+            endpoint {
+                remote-endpoint = <&is_s5k6a3_ep>;
+                data-lanes = <1>;
+                samsung,csis-hs-settle = <18>;
+                samsung,csis-wclk;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml
new file mode 100644
index 000000000000..271d0577a83c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4210-fimc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC Fully Integrated Mobile Camera
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+  Each FIMC device should have an alias in the aliases node, in the form of
+  fimc<n>, where <n> is an integer specifying the IP block instance.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-fimc
+      - samsung,exynos4212-fimc
+      - samsung,s5pv210-fimc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: fimc
+      - const: sclk_fimc
+
+  clock-frequency:
+    description:
+      Maximum FIMC local clock (LCLK) frequency.
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  samsung,cam-if:
+    type: boolean
+    description:
+      The FIMC IP block includes the camera input interface.
+
+  samsung,isp-wb:
+    type: boolean
+    description: |
+      The FIMC IP block has the ISP writeback input.
+
+  samsung,lcd-wb:
+    type: boolean
+    description: |
+      The FIMC IP block has the LCD writeback input.
+
+  samsung,mainscaler-ext:
+    type: boolean
+    description:
+      FIMC IP supports extended image size and has CIEXTEN register.
+
+  samsung,min-pix-alignment:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: Minimum supported image height alignment.
+      - description: Horizontal image offset.
+    description:
+      The values are in pixels and default is <2 1>.
+
+  samsung,min-pix-sizes:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 2
+    description: |
+      An array specyfing minimum image size in pixels at the FIMC input and
+      output DMA, in the first and second cell respectively.  Default value
+      is <16 16>.
+
+  samsung,pix-limits:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    maxItems: 4
+    description: |
+      An array of maximum supported image sizes in pixels, for details refer to
+      Table 2-1 in the S5PV210 SoC User Manual. The meaning of each cell is as
+      follows:
+       0 - scaler input horizontal size
+       1 - input horizontal size for the scaler bypassed
+       2 - REAL_WIDTH without input rotation
+       3 - REAL_HEIGHT with input rotation
+
+  samsung,rotators:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x11
+    description: |
+      A bitmask specifying whether this IP has the input and the output
+      rotator. Bits 4 and 0 correspond to input and output rotator
+      respectively. If a rotator is present its corresponding bit should be
+      set.
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      System Registers (SYSREG) node.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - samsung,pix-limits
+
+allOf:
+  - if:
+      required:
+        - samsung,isp-wb
+    then:
+      required:
+        - samsung,sysreg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    fimc@11800000 {
+        compatible = "samsung,exynos4212-fimc";
+        reg = <0x11800000 0x1000>;
+        clocks = <&clock CLK_FIMC0>,
+                 <&clock CLK_SCLK_FIMC0>;
+        clock-names = "fimc", "sclk_fimc";
+        interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+        iommus = <&sysmmu_fimc0>;
+        power-domains = <&pd_cam>;
+        samsung,sysreg = <&sys_reg>;
+
+        samsung,pix-limits = <4224 8192 1920 4224>;
+        samsung,mainscaler-ext;
+        samsung,isp-wb;
+        samsung,cam-if;
+
+        assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+                          <&clock CLK_SCLK_FIMC0>;
+        assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+        assigned-clock-rates = <0>, <176000000>;
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
new file mode 100644
index 000000000000..3691cd4962b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
@@ -0,0 +1,220 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4212-fimc-is.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos4212/4412 SoC Imaging Subsystem (FIMC-IS)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+  The FIMC-IS is a subsystem for processing image signal from an image sensor.
+  The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5
+  processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C
+  and SPI bus controllers, PWM and ADC.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4212-fimc-is
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  clocks:
+    maxItems: 21
+
+  clock-names:
+    items:
+      - const: lite0
+      - const: lite1
+      - const: ppmuispx
+      - const: ppmuispmx
+      - const: isp
+      - const: drc
+      - const: fd
+      - const: mcuisp
+      - const: gicisp
+      - const: mcuctl_isp
+      - const: pwm_isp
+      - const: ispdiv0
+      - const: ispdiv1
+      - const: mcuispdiv0
+      - const: mcuispdiv1
+      - const: mpll
+      - const: aclk200
+      - const: aclk400mcuisp
+      - const: div_aclk200
+      - const: div_aclk400mcuisp
+      - const: uart
+
+  interrupts:
+    maxItems: 2
+
+  iommus:
+    maxItems: 4
+
+  iommu-names:
+    items:
+      - const: isp
+      - const: drc
+      - const: fd
+      - const: mcuctl
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^pmu@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+    description:
+      Node representing the SoC's Power Management Unit (duplicated with the
+      correct PMU node in the SoC).
+
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+  "^i2c-isp@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/i2c/i2c-controller.yaml#
+    unevaluatedProperties: false
+    description:
+      ISP I2C bus controller
+
+    properties:
+      compatible:
+        const: samsung,exynos4212-i2c-isp
+
+      reg:
+        maxItems: 1
+
+
+      clocks:
+        maxItems: 1
+
+      clock-names:
+        items:
+          - const: i2c_isp
+
+      pinctrl-0: true
+      pinctrl-names:
+        items:
+          - const: default
+
+    required:
+      - compatible
+      - reg
+      - clocks
+      - clock-names
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - clocks
+  - clock-names
+  - interrupts
+  - ranges
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    fimc-is@12000000 {
+        compatible = "samsung,exynos4212-fimc-is";
+        reg = <0x12000000 0x260000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
+                 <&isp_clock CLK_ISP_FIMC_LITE1>,
+                 <&isp_clock CLK_ISP_PPMUISPX>,
+                 <&isp_clock CLK_ISP_PPMUISPMX>,
+                 <&isp_clock CLK_ISP_FIMC_ISP>,
+                 <&isp_clock CLK_ISP_FIMC_DRC>,
+                 <&isp_clock CLK_ISP_FIMC_FD>,
+                 <&isp_clock CLK_ISP_MCUISP>,
+                 <&isp_clock CLK_ISP_GICISP>,
+                 <&isp_clock CLK_ISP_MCUCTL_ISP>,
+                 <&isp_clock CLK_ISP_PWM_ISP>,
+                 <&isp_clock CLK_ISP_DIV_ISP0>,
+                 <&isp_clock CLK_ISP_DIV_ISP1>,
+                 <&isp_clock CLK_ISP_DIV_MCUISP0>,
+                 <&isp_clock CLK_ISP_DIV_MCUISP1>,
+                 <&clock CLK_MOUT_MPLL_USER_T>,
+                 <&clock CLK_ACLK200>,
+                 <&clock CLK_ACLK400_MCUISP>,
+                 <&clock CLK_DIV_ACLK200>,
+                 <&clock CLK_DIV_ACLK400_MCUISP>,
+                 <&clock CLK_UART_ISP_SCLK>;
+        clock-names = "lite0", "lite1", "ppmuispx",
+                      "ppmuispmx", "isp",
+                      "drc", "fd", "mcuisp",
+                      "gicisp", "mcuctl_isp", "pwm_isp",
+                      "ispdiv0", "ispdiv1", "mcuispdiv0",
+                      "mcuispdiv1", "mpll", "aclk200",
+                      "aclk400mcuisp", "div_aclk200",
+                      "div_aclk400mcuisp", "uart";
+        iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+                 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+        iommu-names = "isp", "drc", "fd", "mcuctl";
+        power-domains = <&pd_isp>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        pmu@10020000 {
+            reg = <0x10020000 0x3000>;
+        };
+
+        i2c-isp@12140000 {
+            compatible = "samsung,exynos4212-i2c-isp";
+            reg = <0x12140000 0x100>;
+            clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
+            clock-names = "i2c_isp";
+            pinctrl-0 = <&fimc_is_i2c1>;
+            pinctrl-names = "default";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            image-sensor@10 {
+                compatible = "samsung,s5k6a3";
+                reg = <0x10>;
+                svdda-supply = <&cam_io_reg>;
+                svddio-supply = <&ldo19_reg>;
+                afvdd-supply = <&ldo19_reg>;
+                clock-frequency = <24000000>;
+                clocks = <&camera 1>;
+                clock-names = "extclk";
+                gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+
+                port {
+                    endpoint {
+                        remote-endpoint = <&csis1_ep>;
+                        data-lanes = <1>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml
new file mode 100644
index 000000000000..f80eca0a4f41
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4212-fimc-lite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC series camera host interface (FIMC-LITE)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+  Each FIMC device should have an alias in the aliases node, in the form of
+  fimc-lite<n>, where <n> is an integer specifying the IP block instance.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4212-fimc-lite
+      - samsung,exynos5250-fimc-lite
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: flite
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    fimc-lite@12390000 {
+        compatible = "samsung,exynos4212-fimc-lite";
+        reg = <0x12390000 0x1000>;
+        clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
+        clock-names = "flite";
+        interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_isp>;
+        iommus = <&sysmmu_fimc_lite0>;
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml
new file mode 100644
index 000000000000..878397830a4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos5250-gsc.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos5250-gsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC G-Scaler
+
+maintainers:
+  - Inki Dae <inki.dae@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Seung-Woo Kim <sw0312.kim@samsung.com
+
+description:
+  G-Scaler is used for scaling and color space conversion on Samsung Exynos
+  SoCs.
+
+  Each G-Scaler node should have a numbered alias in the aliases node, in the
+  form of gscN, N = 0...3.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - samsung,exynos5250-gsc
+              - samsung,exynos5420-gsc
+          - const: samsung,exynos5-gsc
+      - enum:
+          - samsung,exynos5433-gsc
+      - const: samsung,exynos5-gsc
+        deprecated: True
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    maxItems: 5
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  samsung,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Syscon used to control the system registers to set writeback input and destination.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5-gsc
+              - samsung,exynos5250-gsc
+              - samsung,exynos5420-gsc
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: gscl
+    else:
+      properties:
+        clocks:
+          minItems: 5
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+            - const: aclk_gsclbend
+            - const: gsd
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5250.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    video-scaler@13e00000 {
+        compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
+        reg = <0x13e00000 0x1000>;
+        interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&pd_gsc>;
+        clocks = <&clock CLK_GSCL0>;
+        clock-names = "gscl";
+        iommus = <&sysmmu_gsc0>;
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,fimc.yaml b/Documentation/devicetree/bindings/media/samsung,fimc.yaml
new file mode 100644
index 000000000000..79ff6d83a9fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,fimc.yaml
@@ -0,0 +1,279 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,fimc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC Camera Subsystem (FIMC)
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+  The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
+  represented by separate device tree nodes. Currently this includes: Fully
+  Integrated Mobile Camera (FIMC, in the S5P SoCs series known as CAMIF), MIPI
+  CSIS, FIMC-LITE and FIMC-IS (ISP).
+
+properties:
+  compatible:
+    const: samsung,fimc
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 1
+    description: |
+      The clock specifier cell stores an index of a clock: 0, 1 for
+      CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively.
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: sclk_cam0
+      - const: sclk_cam1
+      - const: pxl_async0
+      - const: pxl_async1
+
+  clock-output-names:
+    maxItems: 2
+
+  parallel-ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    description:
+      Active parallel video input ports.
+
+    patternProperties:
+      "^port@[01]$":
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description:
+          Camera A and camera B inputs.
+
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: idle
+      - const: active_a
+      - const: active_b
+
+patternProperties:
+  "^csis@[0-9a-f]+$":
+    type: object
+    $ref: samsung,exynos4210-csis.yaml#
+    description: MIPI CSI-2 receiver.
+
+  "^fimc@[0-9a-f]+$":
+    type: object
+    $ref: samsung,exynos4210-fimc.yaml#
+    description: Fully Integrated Mobile Camera.
+
+  "^fimc-is@[0-9a-f]+$":
+    type: object
+    $ref: samsung,exynos4212-fimc-is.yaml#
+    description: Imaging Subsystem (FIMC-IS).
+
+  "^fimc-lite@[0-9a-f]+$":
+    type: object
+    $ref: samsung,exynos4212-fimc-lite.yaml#
+    description: Camera host interface (FIMC-LITE).
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#clock-cells'
+  - clocks
+  - clock-names
+  - clock-output-names
+  - ranges
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    camera@11800000 {
+        compatible = "samsung,fimc";
+        #clock-cells = <1>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x0 0x18000000>;
+
+        clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+                 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
+        clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+        clock-output-names = "cam_a_clkout", "cam_b_clkout";
+
+        assigned-clocks = <&clock CLK_MOUT_CAM0>,
+                          <&clock CLK_MOUT_CAM1>;
+        assigned-clock-parents = <&clock CLK_XUSBXTI>,
+                                 <&clock CLK_XUSBXTI>;
+
+        pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
+        pinctrl-names = "default";
+
+        fimc@11800000 {
+            compatible = "samsung,exynos4212-fimc";
+            reg = <0x11800000 0x1000>;
+            interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clock CLK_FIMC0>,
+                     <&clock CLK_SCLK_FIMC0>;
+            clock-names = "fimc", "sclk_fimc";
+            power-domains = <&pd_cam>;
+            samsung,sysreg = <&sys_reg>;
+            iommus = <&sysmmu_fimc0>;
+
+            samsung,pix-limits = <4224 8192 1920 4224>;
+            samsung,mainscaler-ext;
+            samsung,isp-wb;
+            samsung,cam-if;
+        };
+
+        /* ... FIMC 1-3 */
+
+        csis@11880000 {
+            compatible = "samsung,exynos4210-csis";
+            reg = <0x11880000 0x4000>;
+            interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clock CLK_CSIS0>,
+                     <&clock CLK_SCLK_CSIS0>;
+            clock-names = "csis", "sclk_csis";
+            assigned-clocks = <&clock CLK_MOUT_CSIS0>,
+                              <&clock CLK_SCLK_CSIS0>;
+            assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+            assigned-clock-rates = <0>, <176000000>;
+
+            bus-width = <4>;
+            power-domains = <&pd_cam>;
+            phys = <&mipi_phy 0>;
+            phy-names = "csis";
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            vddcore-supply = <&ldo8_reg>;
+            vddio-supply = <&ldo10_reg>;
+
+            /* Camera C (3) MIPI CSI-2 (CSIS0) */
+            port@3 {
+                reg = <3>;
+                endpoint {
+                    remote-endpoint = <&s5c73m3_ep>;
+                    data-lanes = <1 2 3 4>;
+                    samsung,csis-hs-settle = <12>;
+                };
+            };
+        };
+
+        /* ... CSIS 1 */
+
+        fimc-lite@12390000 {
+              compatible = "samsung,exynos4212-fimc-lite";
+              reg = <0x12390000 0x1000>;
+              interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+              power-domains = <&pd_isp>;
+              clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
+              clock-names = "flite";
+              iommus = <&sysmmu_fimc_lite0>;
+        };
+
+        /* ... FIMC-LITE 1 */
+
+        fimc-is@12000000 {
+            compatible = "samsung,exynos4212-fimc-is";
+            reg = <0x12000000 0x260000>;
+            interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
+                     <&isp_clock CLK_ISP_FIMC_LITE1>,
+                     <&isp_clock CLK_ISP_PPMUISPX>,
+                     <&isp_clock CLK_ISP_PPMUISPMX>,
+                     <&isp_clock CLK_ISP_FIMC_ISP>,
+                     <&isp_clock CLK_ISP_FIMC_DRC>,
+                     <&isp_clock CLK_ISP_FIMC_FD>,
+                     <&isp_clock CLK_ISP_MCUISP>,
+                     <&isp_clock CLK_ISP_GICISP>,
+                     <&isp_clock CLK_ISP_MCUCTL_ISP>,
+                     <&isp_clock CLK_ISP_PWM_ISP>,
+                     <&isp_clock CLK_ISP_DIV_ISP0>,
+                     <&isp_clock CLK_ISP_DIV_ISP1>,
+                     <&isp_clock CLK_ISP_DIV_MCUISP0>,
+                     <&isp_clock CLK_ISP_DIV_MCUISP1>,
+                     <&clock CLK_MOUT_MPLL_USER_T>,
+                     <&clock CLK_ACLK200>,
+                     <&clock CLK_ACLK400_MCUISP>,
+                     <&clock CLK_DIV_ACLK200>,
+                     <&clock CLK_DIV_ACLK400_MCUISP>,
+                     <&clock CLK_UART_ISP_SCLK>;
+            clock-names = "lite0", "lite1", "ppmuispx",
+                          "ppmuispmx", "isp",
+                          "drc", "fd", "mcuisp",
+                          "gicisp", "mcuctl_isp", "pwm_isp",
+                          "ispdiv0", "ispdiv1", "mcuispdiv0",
+                          "mcuispdiv1", "mpll", "aclk200",
+                          "aclk400mcuisp", "div_aclk200",
+                          "div_aclk400mcuisp", "uart";
+            iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+                     <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+            iommu-names = "isp", "drc", "fd", "mcuctl";
+            power-domains = <&pd_isp>;
+
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges;
+
+            pmu@10020000 {
+                reg = <0x10020000 0x3000>;
+            };
+
+            i2c-isp@12140000 {
+                compatible = "samsung,exynos4212-i2c-isp";
+                reg = <0x12140000 0x100>;
+                clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
+                clock-names = "i2c_isp";
+                pinctrl-0 = <&fimc_is_i2c1>;
+                pinctrl-names = "default";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                image-sensor@10 {
+                    compatible = "samsung,s5k6a3";
+                    reg = <0x10>;
+                    svdda-supply = <&cam_io_reg>;
+                    svddio-supply = <&ldo19_reg>;
+                    afvdd-supply = <&ldo19_reg>;
+                    clock-frequency = <24000000>;
+                    /* CAM_B_CLKOUT */
+                    clocks = <&camera 1>;
+                    clock-names = "extclk";
+                    gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+
+                    port {
+                        endpoint {
+                            remote-endpoint = <&csis1_ep>;
+                            data-lanes = <1>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml
new file mode 100644
index 000000000000..1b75390fdaac
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,s5c73m3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5C73M3 8Mp camera ISP
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+  The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656)
+  video data busses. The I2C bus is the main control bus and additionally the
+  SPI bus is used, mostly for transferring the firmware to and from the
+  device. Two slave device nodes corresponding to these control bus
+  interfaces are required and should be placed under respective bus
+  controller nodes.
+
+properties:
+  compatible:
+    const: samsung,s5c73m3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cis_extclk
+
+  clock-frequency:
+    default: 24000000
+    description: cis_extclk clock frequency.
+
+  standby-gpios:
+    maxItems: 1
+    description: STANDBY pin.
+
+  vdda-supply:
+    description: Analog power supply (1.2V).
+
+  vdd-af-supply:
+    description: lens power supply (2.8V).
+
+  vddio-cis-supply:
+    description: CIS I/O power supply (1.2V to 1.8V).
+
+  vddio-host-supply:
+    description: Host I/O power supply (1.8V to 2.8V).
+
+  vdd-int-supply:
+    description: Digital power supply (1.2V).
+
+  vdd-reg-supply:
+    description: Regulator input power supply (2.8V).
+
+  xshutdown-gpios:
+    maxItems: 1
+    description: XSHUTDOWN pin.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            items:
+              - const: 1
+              - const: 2
+              - const: 3
+              - const: 4
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      required:
+        - spi-max-frequency
+    then:
+      properties:
+        # The SPI node is simplified firmware-transfer interface only
+        clocks: false
+        clock-names: false
+        standby-gpios: false
+        vdda-supply: false
+        vdd-af-supply: false
+        vddio-cis-supply: false
+        vddio-host-supply: false
+        vdd-int-supply: false
+        vdd-reg-supply: false
+        xshutdown-gpios: false
+        port: false
+    else:
+      required:
+        - clocks
+        - clock-names
+        - standby-gpios
+        - vdda-supply
+        - vdd-af-supply
+        - vddio-cis-supply
+        - vddio-host-supply
+        - vdd-int-supply
+        - vdd-reg-supply
+        - xshutdown-gpios
+        - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        image-sensor@3c {
+            compatible = "samsung,s5c73m3";
+            reg = <0x3c>;
+            clock-frequency = <24000000>;
+            clocks = <&camera 0>;
+            clock-names = "cis_extclk";
+            standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>;
+            vdda-supply = <&cam_vdda_reg>;
+            vdd-af-supply = <&cam_af_reg>;
+            vddio-cis-supply = <&ldo9_reg>;
+            vddio-host-supply = <&ldo18_reg>;
+            vdd-int-supply = <&buck9_reg>;
+            vdd-reg-supply = <&cam_io_reg>;
+            xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
+
+            port {
+                s5c73m3_ep: endpoint {
+                    remote-endpoint = <&csis0_ep>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+        };
+    };
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        image-sensor@0 {
+            compatible = "samsung,s5c73m3";
+            reg = <0>;
+            spi-max-frequency = <50000000>;
+            controller-data {
+                samsung,spi-feedback-delay = <2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
new file mode 100644
index 000000000000..e28d6ec56c0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,s5pv210-jpeg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5PV210 and Exynos SoC JPEG codec
+
+maintainers:
+  - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-jpeg
+      - samsung,exynos3250-jpeg
+      - samsung,exynos4210-jpeg
+      - samsung,exynos4212-jpeg
+      - samsung,exynos5420-jpeg
+      - samsung,exynos5433-jpeg
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - interrupts
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s5pv210-jpeg
+              - samsung,exynos4210-jpeg
+              - samsung,exynos4212-jpeg
+              - samsung,exynos5420-jpeg
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: jpeg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos3250-jpeg
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: jpeg
+            - const: sclk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5433-jpeg
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: pclk
+            - const: aclk
+            - const: aclk_xiu
+            - const: sclk
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    codec@15020000 {
+        compatible = "samsung,exynos5433-jpeg";
+        reg = <0x15020000 0x10000>;
+        interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+        clock-names = "pclk", "aclk", "aclk_xiu", "sclk";
+        clocks = <&cmu_mscl CLK_PCLK_JPEG>,
+                 <&cmu_mscl CLK_ACLK_JPEG>,
+                 <&cmu_mscl CLK_ACLK_XIU_MSCLX>,
+                 <&cmu_mscl CLK_SCLK_JPEG>;
+        iommus = <&sysmmu_jpeg>;
+        power-domains = <&pd_mscl>;
+    };
diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt
deleted file mode 100644
index 20447529c985..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
+++ /dev/null
@@ -1,209 +0,0 @@
-Samsung S5P/Exynos SoC Camera Subsystem (FIMC)
-----------------------------------------------
-
-The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
-represented by separate device tree nodes. Currently this includes: FIMC (in
-the S5P SoCs series known as CAMIF), MIPI CSIS, FIMC-LITE and FIMC-IS (ISP).
-
-The sub-subdevices are defined as child nodes of the common 'camera' node which
-also includes common properties of the whole subsystem not really specific to
-any single sub-device, like common camera port pins or the CAMCLK clock outputs
-for external image sensors attached to an SoC.
-
-Common 'camera' node
---------------------
-
-Required properties:
-
-- compatible: must be "samsung,fimc", "simple-bus"
-- clocks: list of clock specifiers, corresponding to entries in
-  the clock-names property;
-- clock-names : must contain "sclk_cam0", "sclk_cam1", "pxl_async0",
-  "pxl_async1" entries, matching entries in the clocks property.
-
-- #clock-cells: from the common clock bindings (../clock/clock-bindings.txt),
-  must be 1. A clock provider is associated with the 'camera' node and it should
-  be referenced by external sensors that use clocks provided by the SoC on
-  CAM_*_CLKOUT pins. The clock specifier cell stores an index of a clock.
-  The indices are 0, 1 for CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively.
-
-- clock-output-names: from the common clock bindings, should contain names of
-  clocks registered by the camera subsystem corresponding to CAM_A_CLKOUT,
-  CAM_B_CLKOUT output clocks respectively.
-
-The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
-to define a required pinctrl state named "default" and optional pinctrl states:
-"idle", "active-a", active-b". These optional states can be used to switch the
-camera port pinmux at runtime. The "idle" state should configure both the camera
-ports A and B into high impedance state, especially the CAMCLK clock output
-should be inactive. For the "active-a" state the camera port A must be activated
-and the port B deactivated and for the state "active-b" it should be the other
-way around.
-
-The 'camera' node must include at least one 'fimc' child node.
-
-
-'fimc' device nodes
--------------------
-
-Required properties:
-
-- compatible: "samsung,s5pv210-fimc" for S5PV210, "samsung,exynos4210-fimc"
-  for Exynos4210 and "samsung,exynos4212-fimc" for Exynos4x12 SoCs;
-- reg: physical base address and length of the registers set for the device;
-- interrupts: should contain FIMC interrupt;
-- clocks: list of clock specifiers, must contain an entry for each required
-  entry in clock-names;
-- clock-names: must contain "fimc", "sclk_fimc" entries.
-- samsung,pix-limits: an array of maximum supported image sizes in pixels, for
-  details refer to Table 2-1 in the S5PV210 SoC User Manual; The meaning of
-  each cell is as follows:
-  0 - scaler input horizontal size,
-  1 - input horizontal size for the scaler bypassed,
-  2 - REAL_WIDTH without input rotation,
-  3 - REAL_HEIGHT with input rotation,
-- samsung,sysreg: a phandle to the SYSREG node.
-
-Each FIMC device should have an alias in the aliases node, in the form of
-fimc<n>, where <n> is an integer specifying the IP block instance.
-
-Optional properties:
-
-- clock-frequency: maximum FIMC local clock (LCLK) frequency;
-- samsung,min-pix-sizes: an array specyfing minimum image size in pixels at
-  the FIMC input and output DMA, in the first and second cell respectively.
-  Default value when this property is not present is <16 16>;
-- samsung,min-pix-alignment: minimum supported image height alignment (first
-  cell) and the horizontal image offset (second cell). The values are in pixels
-  and default to <2 1> when this property is not present;
-- samsung,mainscaler-ext: a boolean property indicating whether the FIMC IP
-  supports extended image size and has CIEXTEN register;
-- samsung,rotators: a bitmask specifying whether this IP has the input and
-  the output rotator. Bits 4 and 0 correspond to input and output rotator
-  respectively. If a rotator is present its corresponding bit should be set.
-  Default value when this property is not specified is 0x11.
-- samsung,cam-if: a bolean property indicating whether the IP block includes
-  the camera input interface.
-- samsung,isp-wb: this property must be present if the IP block has the ISP
-  writeback input.
-- samsung,lcd-wb: this property must be present if the IP block has the LCD
-  writeback input.
-
-
-'parallel-ports' node
----------------------
-
-This node should contain child 'port' nodes specifying active parallel video
-input ports. It includes camera A and camera B inputs. 'reg' property in the
-port nodes specifies data input - 1, 2 indicates input A, B respectively.
-
-Optional properties
-
-- samsung,camclk-out (deprecated) : specifies clock output for remote sensor,
-  0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;
-
-Image sensor nodes
-------------------
-
-The sensor device nodes should be added to their control bus controller (e.g.
-I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
-using the common video interfaces bindings, defined in video-interfaces.txt.
-
-Example:
-
-	aliases {
-		fimc0 = &fimc_0;
-	};
-
-	/* Parallel bus IF sensor */
-	i2c_0: i2c@13860000 {
-		s5k6aa: sensor@3c {
-			compatible = "samsung,s5k6aafx";
-			reg = <0x3c>;
-			vddio-supply = <...>;
-
-			clock-frequency = <24000000>;
-			clocks = <&camera 1>;
-			clock-names = "mclk";
-
-			port {
-				s5k6aa_ep: endpoint {
-					remote-endpoint = <&fimc0_ep>;
-					bus-width = <8>;
-					hsync-active = <0>;
-					vsync-active = <1>;
-					pclk-sample = <1>;
-				};
-			};
-		};
-
-		/* MIPI CSI-2 bus IF sensor */
-		s5c73m3: sensor@1a {
-			compatible = "samsung,s5c73m3";
-			reg = <0x1a>;
-			vddio-supply = <...>;
-
-			clock-frequency = <24000000>;
-			clocks = <&camera 0>;
-			clock-names = "mclk";
-
-			port {
-				s5c73m3_1: endpoint {
-					data-lanes = <1 2 3 4>;
-					remote-endpoint = <&csis0_ep>;
-				};
-			};
-		};
-	};
-
-	camera {
-		compatible = "samsung,fimc", "simple-bus";
-		clocks = <&clock 132>, <&clock 133>, <&clock 351>,
-			 <&clock 352>;
-		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0",
-			      "pxl_async1";
-		#clock-cells = <1>;
-		clock-output-names = "cam_a_clkout", "cam_b_clkout";
-		pinctrl-names = "default";
-		pinctrl-0 = <&cam_port_a_clk_active>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* parallel camera ports */
-		parallel-ports {
-			/* camera A input */
-			port@1 {
-				reg = <1>;
-				fimc0_ep: endpoint {
-					remote-endpoint = <&s5k6aa_ep>;
-					bus-width = <8>;
-					hsync-active = <0>;
-					vsync-active = <1>;
-					pclk-sample = <1>;
-				};
-			};
-		};
-
-		fimc_0: fimc@11800000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11800000 0x1000>;
-			interrupts = <0 85 0>;
-		};
-
-		csis_0: csis@11880000 {
-			compatible = "samsung,exynos4210-csis";
-			reg = <0x11880000 0x1000>;
-			interrupts = <0 78 0>;
-			/* camera C input */
-			port@3 {
-				reg = <3>;
-				csis0_ep: endpoint {
-					remote-endpoint = <&s5c73m3_ep>;
-					data-lanes = <1 2 3 4>;
-					samsung,csis-hs-settle = <12>;
-				};
-			};
-		};
-	};
-
-The MIPI-CSIS device binding is defined in samsung-mipi-csis.txt.
diff --git a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt
deleted file mode 100644
index a4149c9434ea..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS)
--------------------------------------------------------------
-
-Required properties:
-
-- compatible	  : "samsung,s5pv210-csis" for S5PV210 (S5PC110),
-		    "samsung,exynos4210-csis" for Exynos4210 (S5PC210),
-		    "samsung,exynos4212-csis" for Exynos4212/Exynos4412,
-		    "samsung,exynos5250-csis" for Exynos5250;
-- reg		  : offset and length of the register set for the device;
-- interrupts      : should contain MIPI CSIS interrupt; the format of the
-		    interrupt specifier depends on the interrupt controller;
-- bus-width	  : maximum number of data lanes supported (SoC specific);
-- vddio-supply    : MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V);
-- vddcore-supply  : MIPI CSIS Core voltage supply (e.g. 1.1V);
-- clocks	  : list of clock specifiers, corresponding to entries in
-		    clock-names property;
-- clock-names	  : must contain "csis", "sclk_csis" entries, matching entries
-		    in the clocks property.
-
-Optional properties:
-
-- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
-		    value when this property is not specified is 166 MHz;
-- samsung,csis-wclk : CSI-2 wrapper clock selection. If this property is present
-		    external clock from CMU will be used, or the bus clock if
-		    if it's not specified.
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-media/video-interfaces.txt. The following are properties specific to those nodes.
-
-port node
----------
-
-- reg		  : (required) must be 3 for camera C input (CSIS0) or 4 for
-		    camera D input (CSIS1);
-
-endpoint node
--------------
-
-- data-lanes	  : (required) an array specifying active physical MIPI-CSI2
-		    data input lanes and their mapping to logical lanes; the
-		    array's content is unused, only its length is meaningful;
-
-- samsung,csis-hs-settle : (optional) differential receiver (HS-RX) settle time;
-
-
-Example:
-
-	reg0: regulator@0 {
-	};
-
-	reg1: regulator@1 {
-	};
-
-/* SoC properties */
-
-	csis_0: csis@11880000 {
-		compatible = "samsung,exynos4210-csis";
-		reg = <0x11880000 0x1000>;
-		interrupts = <0 78 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-/* Board properties */
-
-	csis_0: csis@11880000 {
-		clock-frequency = <166000000>;
-		vddio-supply = <&reg0>;
-		vddcore-supply = <&reg1>;
-		port {
-			reg = <3>; /* 3 - CSIS0, 4 - CSIS1 */
-			csis0_ep: endpoint {
-				remote-endpoint = <...>;
-				data-lanes = <1>, <2>;
-				samsung,csis-hs-settle = <12>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
deleted file mode 100644
index 21f31fdf5543..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-Samsung S5C73M3 8Mp camera ISP
-------------------------------
-
-The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656) video
-data busses. The I2C bus is the main control bus and additionally the SPI bus
-is used, mostly for transferring the firmware to and from the device. Two
-slave device nodes corresponding to these control bus interfaces are required
-and should be placed under respective bus controller nodes.
-
-I2C slave device node
----------------------
-
-Required properties:
-
-- compatible	    : "samsung,s5c73m3";
-- reg		    : I2C slave address of the sensor;
-- vdd-int-supply    : digital power supply (1.2V);
-- vdda-supply	    : analog power supply (1.2V);
-- vdd-reg-supply    : regulator input power supply (2.8V);
-- vddio-host-supply : host I/O power supply (1.8V to 2.8V);
-- vddio-cis-supply  : CIS I/O power supply (1.2V to 1.8V);
-- vdd-af-supply     : lens power supply (2.8V);
-- xshutdown-gpios   : specifier of GPIO connected to the XSHUTDOWN pin;
-- standby-gpios     : specifier of GPIO connected to the STANDBY pin;
-- clocks	    : should contain list of phandle and clock specifier pairs
-		      according to common clock bindings for the clocks described
-		      in the clock-names property;
-- clock-names	    : should contain "cis_extclk" entry for the CIS_EXTCLK clock;
-
-Optional properties:
-
-- clock-frequency   : the frequency at which the "cis_extclk" clock should be
-		      configured to operate, in Hz; if this property is not
-		      specified default 24 MHz value will be used.
-
-The common video interfaces bindings (see video-interfaces.txt) should be used
-to specify link from the S5C73M3 to an external image data receiver. The S5C73M3
-device node should contain one 'port' child node with an 'endpoint' subnode for
-this purpose. The data link from a raw image sensor to the S5C73M3 can be
-similarly specified, but it is optional since the S5C73M3 ISP and a raw image
-sensor are usually inseparable and form a hybrid module.
-
-Following properties are valid for the endpoint node(s):
-
-endpoint subnode
-----------------
-
-- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
-  video-interfaces.txt. This sensor doesn't support data lane remapping
-  and physical lane indexes in subsequent elements of the array should
-  be only consecutive ascending values.
-
-SPI device node
----------------
-
-Required properties:
-
-- compatible	    : "samsung,s5c73m3";
-
-For more details see description of the SPI busses bindings
-(../spi/spi-bus.txt) and bindings of a specific bus controller.
-
-Example:
-
-i2c@138a000000 {
-	...
-	s5c73m3@3c {
-		compatible = "samsung,s5c73m3";
-		reg = <0x3c>;
-		vdd-int-supply = <&buck9_reg>;
-		vdda-supply = <&ldo17_reg>;
-		vdd-reg-supply = <&cam_io_reg>;
-		vddio-host-supply = <&ldo18_reg>;
-		vddio-cis-supply = <&ldo9_reg>;
-		vdd-af-supply = <&cam_af_reg>;
-		clock-frequency = <24000000>;
-		clocks = <&clk 0>;
-		clock-names = "cis_extclk";
-		reset-gpios = <&gpf1 3 1>;
-		standby-gpios = <&gpm0 1 1>;
-		port {
-			s5c73m3_ep: endpoint {
-				remote-endpoint = <&csis0_ep>;
-				data-lanes = <1 2 3 4>;
-			};
-		};
-	};
-};
-
-spi@1392000 {
-	...
-	s5c73m3_spi: s5c73m3@0 {
-		compatible = "samsung,s5c73m3";
-		reg = <0>;
-		...
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
deleted file mode 100644
index 1f51e0439c96..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP
---------------------------------------------------------------------
-
-Required properties:
-
-- compatible	  : "samsung,s5k5baf";
-- reg		  : I2C slave address of the sensor;
-- vdda-supply	  : analog power supply 2.8V (2.6V to 3.0V);
-- vddreg-supply	  : regulator input power supply 1.8V (1.7V to 1.9V)
-		    or 2.8V (2.6V to 3.0);
-- vddio-supply	  : I/O power supply 1.8V (1.65V to 1.95V)
-		    or 2.8V (2.5V to 3.1V);
-- stbyn-gpios	  : GPIO connected to STDBYN pin;
-- rstn-gpios	  : GPIO connected to RSTN pin;
-- clocks	  : list of phandle and clock specifier pairs
-		    according to common clock bindings for the
-		    clocks described in clock-names;
-- clock-names	  : should include "mclk" for the sensor's master clock;
-
-Optional properties:
-
-- clock-frequency : the frequency at which the "mclk" clock should be
-		    configured to operate, in Hz; if this property is not
-		    specified default 24 MHz value will be used.
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-media/video-interfaces.txt. The following are properties specific to those
-nodes.
-
-endpoint node
--------------
-
-- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
-	       video-interfaces.txt. If present it should be <1> - the device
-	       supports only one data lane without re-mapping.
-
-Example:
-
-s5k5bafx@2d {
-	compatible = "samsung,s5k5baf";
-	reg = <0x2d>;
-	vdda-supply = <&cam_io_en_reg>;
-	vddreg-supply = <&vt_core_15v_reg>;
-	vddio-supply = <&vtcam_reg>;
-	stbyn-gpios = <&gpl2 0 1>;
-	rstn-gpios = <&gpl2 1 1>;
-	clock-names = "mclk";
-	clocks = <&clock_cam 0>;
-	clock-frequency = <24000000>;
-
-	port {
-		s5k5bafx_ep: endpoint {
-			remote-endpoint = <&csis1_ep>;
-			data-lanes = <1>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
deleted file mode 100644
index cce01e82f3e3..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Samsung S5K6A3(YX) raw image sensor
----------------------------------
-
-S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
-and CCI (I2C compatible) control bus.
-
-Required properties:
-
-- compatible	: "samsung,s5k6a3";
-- reg		: I2C slave address of the sensor;
-- svdda-supply	: core voltage supply;
-- svddio-supply	: I/O voltage supply;
-- afvdd-supply	: AF (actuator) voltage supply;
-- gpios		: specifier of a GPIO connected to the RESET pin;
-- clocks	: should contain list of phandle and clock specifier pairs
-		  according to common clock bindings for the clocks described
-		  in the clock-names property;
-- clock-names	: should contain "extclk" entry for the sensor's EXTCLK clock;
-
-Optional properties:
-
-- clock-frequency : the frequency at which the "extclk" clock should be
-		    configured to operate, in Hz; if this property is not
-		    specified default 24 MHz value will be used.
-
-The common video interfaces bindings (see video-interfaces.txt) should be
-used to specify link to the image data receiver. The S5K6A3(YX) device
-node should contain one 'port' child node with an 'endpoint' subnode.
-
-Following properties are valid for the endpoint node:
-
-- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
-  video-interfaces.txt.  The sensor supports only one data lane.
diff --git a/Documentation/devicetree/bindings/media/si470x.txt b/Documentation/devicetree/bindings/media/si470x.txt
deleted file mode 100644
index a9403558362e..000000000000
--- a/Documentation/devicetree/bindings/media/si470x.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-* Silicon Labs FM Radio receiver
-
-The Silicon Labs Si470x is family of FM radio receivers with receive power scan
-supporting 76-108 MHz, programmable through an I2C interface.
-Some of them includes an RDS encoder.
-
-Required Properties:
-- compatible: Should contain "silabs,si470x"
-- reg: the I2C address of the device
-
-Optional Properties:
-- interrupts : The interrupt number
-- reset-gpios: GPIO specifier for the chips reset line
-
-Example:
-
-&i2c2 {
-        si470x@63 {
-                compatible = "silabs,si470x";
-                reg = <0x63>;
-
-                interrupt-parent = <&gpj2>;
-                interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-                reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>;
-        };
-};
diff --git a/Documentation/devicetree/bindings/media/silabs,si470x.yaml b/Documentation/devicetree/bindings/media/silabs,si470x.yaml
new file mode 100644
index 000000000000..a3d19c562ca3
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/silabs,si470x.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/silabs,si470x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Labs Si470x FM Radio Receiver
+
+maintainers:
+  - Hans Verkuil <hverkuil@xs4all.nl>
+  - Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
+
+properties:
+  compatible:
+    const: silabs,si470x
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fmradio@10 {
+            compatible = "silabs,si470x";
+            reg = <0x10>;
+            interrupt-parent = <&gpj2>;
+            interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+            reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
index 41e1d0cd80e5..6b3e413cedb2 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
+++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/media/st,stm32-dcmi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Digital Camera Memory Interface (DCMI) binding
+title: STMicroelectronics STM32 Digital Camera Memory Interface (DCMI)
 
 maintainers:
-  - Hugues Fruchet <hugues.fruchet@st.com>
+  - Hugues Fruchet <hugues.fruchet@foss.st.com>
 
 properties:
   compatible:
@@ -90,7 +90,9 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/media/video-interfaces.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
+
     dcmi: dcmi@4c006000 {
         compatible = "st,stm32-dcmi";
         reg = <0x4c006000 0x400>;
@@ -104,7 +106,7 @@ examples:
         port {
              dcmi_0: endpoint {
                    remote-endpoint = <&ov5640_0>;
-                   bus-type = <5>;
+                   bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
                    bus-width = <8>;
                    hsync-active = <0>;
                    vsync-active = <0>;
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml
new file mode 100644
index 000000000000..4afa4a24b868
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/st,stm32-dma2d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Chrom-Art Accelerator DMA2D
+
+description:
+  Chrom-ART Accelerator(DMA2D), graphical hardware accelerator
+  enabling enhanced graphical user interface with minimum CPU load
+
+  It can perform the following operations.
+
+  - Filling a part or the whole of a destination image with a specific color.
+  - Copying a part or the whole of a source image into a part or the whole of
+    a destination image.
+  - Copying a part or the whole of a source image into a part or the whole of
+    a destination image with a pixel format conversion.
+  - Blending a part and/or two complete source images with different pixel
+    format and copy the result into a part or the whole of a destination image
+    with a different color format. (TODO)
+
+
+maintainers:
+  - Dillon Min <dillon.minfei@gmail.com>
+
+properties:
+  compatible:
+    const: st,stm32-dma2d
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: dma2d
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32fx-clock.h>
+    #include <dt-bindings/mfd/stm32f4-rcc.h>
+    dma2d: dma2d@4002b000 {
+        compatible = "st,stm32-dma2d";
+        reg = <0x4002b000 0xc00>;
+        interrupts = <90>;
+        resets = <&rcc STM32F4_AHB1_RESET(DMA2D)>;
+        clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2D)>;
+        clock-names = "dma2d";
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt
deleted file mode 100644
index ece0832fdeaf..000000000000
--- a/Documentation/devicetree/bindings/media/stih-cec.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-STMicroelectronics STIH4xx HDMI CEC driver
-
-Required properties:
- - compatible : value should be "st,stih-cec"
- - reg : Physical base address of the IP registers and length of memory
-	 mapped region.
- - clocks : from common clock binding: handle to HDMI CEC clock
- - interrupts : HDMI CEC interrupt number to the CPU.
- - pinctrl-names: Contains only one value - "default"
- - pinctrl-0: Specifies the pin control groups used for CEC hardware.
- - resets: Reference to a reset controller
- - hdmi-phandle: Phandle to the HDMI controller, see also cec.txt.
-
-Example for STIH407:
-
-sti-cec@94a087c {
-	compatible = "st,stih-cec";
-	reg = <0x94a087c 0x64>;
-	clocks = <&clk_sysin>;
-	clock-names = "cec-clk";
-	interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
-	interrupt-names = "cec-irq";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_cec0_default>;
-	resets = <&softreset STIH407_LPM_SOFTRESET>;
-	hdmi-phandle = <&hdmi>;
-};
diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt
deleted file mode 100644
index c503f06f3b84..000000000000
--- a/Documentation/devicetree/bindings/media/tegra-cec.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Tegra HDMI CEC hardware
-
-The HDMI CEC module is present in Tegra SoCs and its purpose is to
-handle communication between HDMI connected devices over the CEC bus.
-
-Required properties:
-  - compatible : value should be one of the following:
-	"nvidia,tegra114-cec"
-	"nvidia,tegra124-cec"
-	"nvidia,tegra210-cec"
-  - reg : Physical base address of the IP registers and length of memory
-	  mapped region.
-  - interrupts : HDMI CEC interrupt number to the CPU.
-  - clocks : from common clock binding: handle to HDMI CEC clock.
-  - clock-names : from common clock binding: must contain "cec",
-		  corresponding to the entry in the clocks property.
-  - hdmi-phandle : phandle to the HDMI controller, see also cec.txt.
-
-Example:
-
-cec@70015000 {
-	compatible = "nvidia,tegra124-cec";
-	reg = <0x0 0x70015000 0x0 0x00001000>;
-	interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&tegra_car TEGRA124_CLK_CEC>;
-	clock-names = "cec";
-};
diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
index 65177cd69514..f1a940a110d2 100644
--- a/Documentation/devicetree/bindings/media/ti,cal.yaml
+++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/ti,cal.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL) Device Tree Bindings
+title: Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
 
 maintainers:
   - Benoit Parrot <bparrot@ti.com>
@@ -47,7 +47,11 @@ properties:
     maxItems: 1
 
   ti,camerrx-control:
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to device control module
+          - description: offset to the control_camerarx_core register
     description:
       phandle to the device control module and offset to the
       control_camerarx_core register
@@ -71,7 +75,7 @@ properties:
       port@0:
         $ref: /schemas/graph.yaml#/$defs/port-base
         unevaluatedProperties: false
-        description: CSI2 Port #0
+        description: 'CSI2 Port #0'
 
         properties:
           endpoint:
@@ -89,7 +93,7 @@ properties:
       port@1:
         $ref: /schemas/graph.yaml#/$defs/port-base
         unevaluatedProperties: false
-        description: CSI2 Port #1
+        description: 'CSI2 Port #1'
 
         properties:
           endpoint:
@@ -154,7 +158,9 @@ examples:
         camera-sensor@3c {
                compatible = "ovti,ov5640";
                reg = <0x3c>;
-
+               AVDD-supply = <&reg_2p8v>;
+               DOVDD-supply = <&reg_1p8v>;
+               DVDD-supply = <&reg_1p5v>;
                clocks = <&clk_ov5640_fixed>;
                clock-names = "xclk";
 
diff --git a/Documentation/devicetree/bindings/media/ti,vpe.yaml b/Documentation/devicetree/bindings/media/ti,vpe.yaml
index ef473f287399..7fa8a367ed22 100644
--- a/Documentation/devicetree/bindings/media/ti,vpe.yaml
+++ b/Documentation/devicetree/bindings/media/ti,vpe.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/ti,vpe.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Texas Instruments DRA7x Video Processing Engine (VPE) Device Tree Bindings
+title: Texas Instruments DRA7x Video Processing Engine (VPE)
 
 maintainers:
   - Benoit Parrot <bparrot@ti.com>
diff --git a/Documentation/devicetree/bindings/media/video-interface-devices.yaml b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
index 4527f56a5a6e..cf7712ad297c 100644
--- a/Documentation/devicetree/bindings/media/video-interface-devices.yaml
+++ b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/video-interface-devices.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common bindings for video receiver and transmitter devices
+title: Common Properties for Video Receiver and Transmitter Devices
 
 maintainers:
   - Jacopo Mondi <jacopo@jmondi.org>
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml
index 4391dce2caee..a211d49dc2ac 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.yaml
+++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/video-interfaces.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common bindings for video receiver and transmitter interface endpoints
+title: Common Properties for Video Receiver and Transmitter Interface Endpoints
 
 maintainers:
   - Sakari Ailus <sakari.ailus@linux.intel.com>
@@ -93,6 +93,7 @@ properties:
       - 4 # MIPI CSI-2 D-PHY
       - 5 # Parallel
       - 6 # BT.656
+      - 7 # DPI
     description:
       Data bus type.
 
@@ -144,9 +145,10 @@ properties:
 
   pclk-sample:
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 0, 1 ]
+    enum: [ 0, 1, 2 ]
     description:
-      Sample data on rising (1) or falling (0) edge of the pixel clock signal.
+      Sample data on falling (0), rising (1) or both (2) edges of the pixel
+      clock signal.
 
   sync-on-green-active:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml b/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
deleted file mode 100644
index 01c9acf9275d..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/arm,pl353-smc.yaml
+++ /dev/null
@@ -1,130 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/memory-controllers/arm,pl353-smc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: ARM PL353 Static Memory Controller (SMC) device-tree bindings
-
-maintainers:
-  - Miquel Raynal <miquel.raynal@bootlin.com>
-  - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
-
-description:
-  The PL353 Static Memory Controller is a bus where you can connect two kinds
-  of memory interfaces, which are NAND and memory mapped interfaces (such as
-  SRAM or NOR).
-
-# We need a select here so we don't match all nodes with 'arm,primecell'
-select:
-  properties:
-    compatible:
-      contains:
-        const: arm,pl353-smc-r2p1
-  required:
-    - compatible
-
-properties:
-  $nodename:
-    pattern: "^memory-controller@[0-9a-f]+$"
-
-  compatible:
-    items:
-      - const: arm,pl353-smc-r2p1
-      - const: arm,primecell
-
-  "#address-cells":
-    const: 2
-
-  "#size-cells":
-    const: 1
-
-  reg:
-    items:
-      - description:
-          Configuration registers for the host and sub-controllers.
-          The three chip select regions are defined in 'ranges'.
-
-  clocks:
-    items:
-      - description: clock for the memory device bus
-      - description: main clock of the SMC
-
-  clock-names:
-    items:
-      - const: memclk
-      - const: apb_pclk
-
-  ranges:
-    minItems: 1
-    description: |
-      Memory bus areas for interacting with the devices. Reflects
-      the memory layout with four integer values following:
-      <cs-number> 0 <offset> <size>
-    items:
-      - description: NAND bank 0
-      - description: NOR/SRAM bank 0
-      - description: NOR/SRAM bank 1
-
-  interrupts: true
-
-patternProperties:
-  "@[0-3],[a-f0-9]+$":
-    type: object
-    description: |
-      The child device node represents the controller connected to the SMC
-      bus. The controller can be a NAND controller or a pair of any memory
-      mapped controllers such as NOR and SRAM controllers.
-
-    properties:
-      compatible:
-        description:
-          Compatible of memory controller.
-
-      reg:
-        items:
-          - items:
-              - description: |
-                  Chip-select ID, as in the parent range property.
-                minimum: 0
-                maximum: 2
-              - description: |
-                  Offset of the memory region requested by the device.
-              - description: |
-                  Length of the memory region requested by the device.
-
-    required:
-      - compatible
-      - reg
-
-required:
-  - compatible
-  - reg
-  - clock-names
-  - clocks
-  - "#address-cells"
-  - "#size-cells"
-  - ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    smcc: memory-controller@e000e000 {
-      compatible = "arm,pl353-smc-r2p1", "arm,primecell";
-      reg = <0xe000e000 0x0001000>;
-      clock-names = "memclk", "apb_pclk";
-      clocks = <&clkc 11>, <&clkc 44>;
-      ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
-                0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
-                0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
-      #address-cells = <2>;
-      #size-cells = <1>;
-
-      nfc0: nand-controller@0,0 {
-        compatible = "arm,pl353-nand-r2p1";
-        reg = <0 0 0x1000000>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-      };
-    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml b/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml
new file mode 100644
index 000000000000..05dd6b3a1a3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/arm,pl35x-smc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm PL35x Series Static Memory Controller (SMC)
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: |
+  The PL35x Static Memory Controller is a bus where you can connect two kinds
+  of memory interfaces, which are NAND and memory mapped interfaces (such as
+  SRAM or NOR) depending on the specific configuration.
+
+  The TRM is available here:
+  https://documentation-service.arm.com/static/5e8e2524fd977155116a58aa
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,pl353-smc-r2p1
+          - arm,pl354
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - arm,pl353-smc-r2p1
+          - arm,pl354
+      - const: arm,primecell
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  reg:
+    items:
+      - description:
+          Configuration registers for the host and sub-controllers.
+          The three chip select regions are defined in 'ranges'.
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  ranges:
+    minItems: 1
+    maxItems: 8
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: Combined or Memory interface 0 IRQ
+      - description: Memory interface 1 IRQ
+
+patternProperties:
+  "@[0-7],[a-f0-9]+$":
+    type: object
+    additionalProperties: true
+    description: |
+      The child device node represents the controller connected to the SMC
+      bus. The controller can be a NAND controller or a pair of any memory
+      mapped controllers such as NOR and SRAM controllers.
+
+    properties:
+      compatible:
+        description:
+          Compatible of memory controller.
+
+      reg:
+        items:
+          - items:
+              - description: |
+                  Chip-select ID, as in the parent range property.
+                minimum: 0
+                maximum: 7
+              - description: |
+                  Offset of the memory region requested by the device.
+              - description: |
+                  Length of the memory region requested by the device.
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: arm,pl354
+    then:
+      properties:
+        clocks:
+          # According to TRM, really should be 3 clocks
+          maxItems: 1
+
+        clock-names:
+          const: apb_pclk
+
+    else:
+      properties:
+        clocks:
+          items:
+            - description: clock for the memory device bus
+            - description: main clock of the SMC
+
+        clock-names:
+          items:
+            - const: memclk
+            - const: apb_pclk
+
+examples:
+  - |
+    smcc: memory-controller@e000e000 {
+      compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+      reg = <0xe000e000 0x0001000>;
+      clock-names = "memclk", "apb_pclk";
+      clocks = <&clkc 11>, <&clkc 44>;
+      ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+                0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+                0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+      #address-cells = <2>;
+      #size-cells = <1>;
+
+      nfc0: nand-controller@0,0 {
+        compatible = "arm,pl353-nand-r2p1";
+        reg = <0 0 0x1000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml b/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml
new file mode 100644
index 000000000000..4b072c879b02
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/brcm,brcmstb-memc-ddr.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/brcm,brcmstb-memc-ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Memory controller (MEMC) for Broadcom STB
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,brcmstb-memc-ddr-rev-b.1.x
+          - brcm,brcmstb-memc-ddr-rev-b.2.0
+          - brcm,brcmstb-memc-ddr-rev-b.2.1
+          - brcm,brcmstb-memc-ddr-rev-b.2.2
+          - brcm,brcmstb-memc-ddr-rev-b.2.3
+          - brcm,brcmstb-memc-ddr-rev-b.2.5
+          - brcm,brcmstb-memc-ddr-rev-b.2.6
+          - brcm,brcmstb-memc-ddr-rev-b.2.7
+          - brcm,brcmstb-memc-ddr-rev-b.2.8
+          - brcm,brcmstb-memc-ddr-rev-b.3.0
+          - brcm,brcmstb-memc-ddr-rev-b.3.1
+          - brcm,brcmstb-memc-ddr-rev-c.1.0
+          - brcm,brcmstb-memc-ddr-rev-c.1.1
+          - brcm,brcmstb-memc-ddr-rev-c.1.2
+          - brcm,brcmstb-memc-ddr-rev-c.1.3
+          - brcm,brcmstb-memc-ddr-rev-c.1.4
+      - const: brcm,brcmstb-memc-ddr
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    description: DDR PHY frequency in Hz
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@9902000 {
+        compatible = "brcm,brcmstb-memc-ddr-rev-c.1.1", "brcm,brcmstb-memc-ddr";
+        reg = <0x9902000 0x600>;
+        clock-frequency = <2133000000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml
index 769f13250047..08cbdcddfead 100644
--- a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: DDR PHY Front End (DPFE) for Broadcom STB
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Markus Mayer <mmayer@broadcom.com>
 
 properties:
diff --git a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml
index 96d563fd61f5..e42aa488704d 100644
--- a/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/calxeda-ddr-ctrlr.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/memory-controllers/calxeda-ddr-ctrlr.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Calxeda DDR memory controller binding
+title: Calxeda DDR memory controller
 
 description: |
   The Calxeda DDR memory controller is initialised and programmed by the
diff --git a/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml b/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
new file mode 100644
index 000000000000..f81fb866e319
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/canaan,k210-sram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan K210 SRAM memory controller
+
+description:
+  The Canaan K210 SRAM memory controller is responsible for the system's 8 MiB
+  of SRAM. The controller is initialised by the bootloader, which configures
+  its clocks, before OS bringup.
+
+maintainers:
+  - Conor Dooley <conor@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - canaan,k210-sram
+
+  clocks:
+    minItems: 1
+    items:
+      - description: sram0 clock
+      - description: sram1 clock
+      - description: aisram clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sram0
+      - const: sram1
+      - const: aisram
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/k210-clk.h>
+    memory-controller {
+        compatible = "canaan,k210-sram";
+        clocks = <&sysclk K210_CLK_SRAM0>,
+                 <&sysclk K210_CLK_SRAM1>,
+                 <&sysclk K210_CLK_AI>;
+        clock-names = "sram0", "sram1", "aisram";
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml
new file mode 100644
index 000000000000..34b5bd153f63
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-channel.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-channel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR channel with chip/rank topology description
+
+description:
+  An LPDDR channel is a completely independent set of LPDDR pins (DQ, CA, CS,
+  CK, etc.) that connect one or more LPDDR chips to a host system. The main
+  purpose of this node is to overall LPDDR topology of the system, including the
+  amount of individual LPDDR chips and the ranks per chip.
+
+maintainers:
+  - Julius Werner <jwerner@chromium.org>
+
+properties:
+  compatible:
+    enum:
+      - jedec,lpddr2-channel
+      - jedec,lpddr3-channel
+      - jedec,lpddr4-channel
+      - jedec,lpddr5-channel
+
+  io-width:
+    description:
+      The number of DQ pins in the channel. If this number is different
+      from (a multiple of) the io-width of the LPDDR chip, that means that
+      multiple instances of that type of chip are wired in parallel on this
+      channel (with the channel's DQ pins split up between the different
+      chips, and the CA, CS, etc. pins of the different chips all shorted
+      together).  This means that the total physical memory controlled by a
+      channel is equal to the sum of the densities of each rank on the
+      connected LPDDR chip, times the io-width of the channel divided by
+      the io-width of the LPDDR chip.
+    enum:
+      - 8
+      - 16
+      - 32
+      - 64
+      - 128
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^rank@[0-9]+$":
+    type: object
+    description:
+      Each physical LPDDR chip may have one or more ranks. Ranks are
+      internal but fully independent sub-units of the chip. Each LPDDR bus
+      transaction on the channel targets exactly one rank, based on the
+      state of the CS pins. Different ranks may have different densities and
+      timing requirements.
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr2-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr2.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr3-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr3.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr4-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr4.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: jedec,lpddr5-channel
+    then:
+      patternProperties:
+        "^rank@[0-9]+$":
+          $ref: /schemas/memory-controllers/ddr/jedec,lpddr5.yaml#
+
+required:
+  - compatible
+  - io-width
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    lpddr-channel0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "jedec,lpddr3-channel";
+      io-width = <32>;
+
+      rank@0 {
+        compatible = "lpddr3-ff,0100", "jedec,lpddr3";
+        reg = <0>;
+        density = <8192>;
+        io-width = <16>;
+        revision-id = <1 0>;
+      };
+    };
+
+    lpddr-channel1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "jedec,lpddr4-channel";
+      io-width = <32>;
+
+      rank@0 {
+        compatible = "lpddr4-05,0301", "jedec,lpddr4";
+        reg = <0>;
+        density = <4096>;
+        io-width = <32>;
+        revision-id = <3 1>;
+      };
+
+      rank@1 {
+        compatible = "lpddr4-05,0301", "jedec,lpddr4";
+        reg = <1>;
+        density = <2048>;
+        io-width = <32>;
+        revision-id = <3 1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml
new file mode 100644
index 000000000000..30267ce70124
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr-props.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for LPDDR types
+
+description:
+  Different LPDDR types generally use the same properties and only differ in the
+  range of legal values for each. This file defines the common parts that can be
+  reused for each type. Nodes using this schema should generally be nested under
+  an LPDDR channel node.
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    description:
+      Compatible strings can be either explicit vendor names and part numbers
+      (e.g. elpida,ECB240ABACN), or generated strings of the form
+      lpddrX-YY,ZZZZ where X is the LPDDR version, YY is the manufacturer ID
+      (from MR5) and ZZZZ is the revision ID (from MR6 and MR7). Both IDs are
+      formatted in lower case hexadecimal representation with leading zeroes.
+      The latter form can be useful when LPDDR nodes are created at runtime by
+      boot firmware that doesn't have access to static part number information.
+
+  reg:
+    description:
+      The rank number of this LPDDR rank when used as a subnode to an LPDDR
+      channel.
+    minimum: 0
+    maximum: 3
+
+  revision-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Revision IDs read from Mode Register 6 and 7. One byte per uint32 cell (i.e. <MR6 MR7>).
+    maxItems: 2
+    items:
+      minimum: 0
+      maximum: 255
+
+  density:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Density in megabits of SDRAM chip. Decoded from Mode Register 8.
+    enum:
+      - 64
+      - 128
+      - 256
+      - 512
+      - 1024
+      - 2048
+      - 3072
+      - 4096
+      - 6144
+      - 8192
+      - 12288
+      - 16384
+      - 24576
+      - 32768
+
+  io-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      IO bus width in bits of SDRAM chip. Decoded from Mode Register 8.
+    enum:
+      - 8
+      - 16
+      - 32
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
new file mode 100644
index 000000000000..1daa66592477
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2-timings.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr2-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR2 SDRAM AC timing parameters for a given speed-bin
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: jedec,lpddr2-timings
+
+  max-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum DDR clock frequency for the speed-bin, in Hz.
+
+  min-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Minimum DDR clock frequency for the speed-bin, in Hz.
+
+  tCKESR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in pico seconds.
+
+  tDQSCK-max:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DQS output data access time from CK_t/CK_c in pico seconds.
+
+  tDQSCK-max-derated:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      DQS output data access time from CK_t/CK_c, temperature de-rated, in pico
+      seconds.
+
+  tFAW:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Four-bank activate window in pico seconds.
+
+  tRAS-max-ns:
+    description: |
+      Row active time in nano seconds.
+
+  tRAS-min:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row active time in pico seconds.
+
+  tRCD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RAS-to-CAS delay in pico seconds.
+
+  tRPab:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row precharge time (all banks) in pico seconds.
+
+  tRRD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Active bank A to active bank B in pico seconds.
+
+  tRTP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal READ to PRECHARGE command delay in pico seconds.
+
+  tWR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      WRITE recovery time in pico seconds.
+
+  tWTR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal WRITE-to-READ command delay in pico seconds.
+
+  tXP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Exit power-down to next valid command delay in pico seconds.
+
+  tZQCL:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Long calibration time in pico seconds.
+
+  tZQCS:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Short calibration time in pico seconds.
+
+  tZQinit:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Initialization calibration time in pico seconds.
+
+required:
+  - compatible
+  - min-freq
+  - max-freq
+
+additionalProperties: false
+
+examples:
+  - |
+    timings {
+        compatible = "jedec,lpddr2-timings";
+        min-freq = <10000000>;
+        max-freq = <400000000>;
+        tCKESR = <15000>;
+        tDQSCK-max = <5500>;
+        tFAW = <50000>;
+        tRAS-max-ns = <70000>;
+        tRAS-min = <42000>;
+        tRPab = <21000>;
+        tRCD = <18000>;
+        tRRD = <10000>;
+        tRTP = <7500>;
+        tWR = <15000>;
+        tWTR = <7500>;
+        tXP = <7500>;
+        tZQCL = <360000>;
+        tZQCS = <90000>;
+        tZQinit = <1000000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
new file mode 100644
index 000000000000..a237bc259273
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr2.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR2 SDRAM compliant to JEDEC JESD209-2
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - elpida,ECB240ABACN
+              - elpida,B8132B2PB-6D-F
+          - enum:
+              - jedec,lpddr2-nvm
+              - jedec,lpddr2-s2
+              - jedec,lpddr2-s4
+      - items:
+          - pattern: "^lpddr2-[0-9a-f]{2},[0-9a-f]{4}$"
+          - enum:
+              - jedec,lpddr2-nvm
+              - jedec,lpddr2-s2
+              - jedec,lpddr2-s4
+
+  revision-id1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Revision 1 value of SDRAM chip. Obtained from device datasheet.
+      Property is deprecated, use revision-id instead.
+    deprecated: true
+
+  revision-id2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Revision 2 value of SDRAM chip. Obtained from device datasheet.
+      Property is deprecated, use revision-id instead.
+    deprecated: true
+
+  tRRD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Active bank a to active bank b in terms of number of clock cycles.
+      Obtained from device datasheet.
+
+  tWTR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Internal WRITE-to-READ command delay in terms of number of clock cycles.
+      Obtained from device datasheet.
+
+  tXP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Exit power-down to next valid command delay in terms of number of clock
+      cycles. Obtained from device datasheet.
+
+  tRTP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Internal READ to PRECHARGE command delay in terms of number of clock
+      cycles. Obtained from device datasheet.
+
+  tCKE-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      CKE minimum pulse width (HIGH and LOW pulse width) in terms of number
+      of clock cycles. Obtained from device datasheet.
+
+  tRPab-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Row precharge time (all banks) in terms of number of clock cycles.
+      Obtained from device datasheet.
+
+  tRCD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      RAS-to-CAS delay in terms of number of clock cycles. Obtained from
+      device datasheet.
+
+  tWR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      WRITE recovery time in terms of number of clock cycles. Obtained from
+      device datasheet.
+
+  tRASmin-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Row active time in terms of number of clock cycles. Obtained from device
+      datasheet.
+
+  tCKESR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in terms of number of clock cycles. Obtained from device
+      datasheet.
+
+  tFAW-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 16
+    description: |
+      Four-bank activate window in terms of number of clock cycles. Obtained
+      from device datasheet.
+
+patternProperties:
+  "^lpddr2-timings":
+    $ref: jedec,lpddr2-timings.yaml
+    description: |
+      The lpddr2 node may have one or more child nodes of type "lpddr2-timings".
+      "lpddr2-timings" provides AC timing parameters of the device for
+      a given speed-bin. The user may provide the timings for as many
+      speed-bins as is required.
+
+required:
+  - compatible
+  - density
+  - io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    elpida_ECB240ABACN: lpddr2 {
+        compatible = "elpida,ECB240ABACN", "jedec,lpddr2-s4";
+        density = <2048>;
+        io-width = <32>;
+        revision-id = <1 0>;
+
+        tRPab-min-tck = <3>;
+        tRCD-min-tck = <3>;
+        tWR-min-tck = <3>;
+        tRASmin-min-tck = <3>;
+        tRRD-min-tck = <2>;
+        tWTR-min-tck = <2>;
+        tXP-min-tck = <2>;
+        tRTP-min-tck = <2>;
+        tCKE-min-tck = <3>;
+        tCKESR-min-tck = <3>;
+        tFAW-min-tck = <8>;
+
+        timings_elpida_ECB240ABACN_400mhz: lpddr2-timings0 {
+            compatible = "jedec,lpddr2-timings";
+            min-freq = <10000000>;
+            max-freq = <400000000>;
+            tRPab = <21000>;
+            tRCD = <18000>;
+            tWR = <15000>;
+            tRAS-min = <42000>;
+            tRRD = <10000>;
+            tWTR = <7500>;
+            tXP = <7500>;
+            tRTP = <7500>;
+            tCKESR = <15000>;
+            tDQSCK-max = <5500>;
+            tFAW = <50000>;
+            tZQCS = <90000>;
+            tZQCL = <360000>;
+            tZQinit = <1000000>;
+            tRAS-max-ns = <70000>;
+        };
+
+        timings_elpida_ECB240ABACN_200mhz: lpddr2-timings1 {
+            compatible = "jedec,lpddr2-timings";
+            min-freq = <10000000>;
+            max-freq = <200000000>;
+            tRPab = <21000>;
+            tRCD = <18000>;
+            tWR = <15000>;
+            tRAS-min = <42000>;
+            tRRD = <10000>;
+            tWTR = <10000>;
+            tXP = <7500>;
+            tRTP = <7500>;
+            tCKESR = <15000>;
+            tDQSCK-max = <5500>;
+            tFAW = <50000>;
+            tZQCS = <90000>;
+            tZQCL = <360000>;
+            tZQinit = <1000000>;
+            tRAS-max-ns = <70000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
new file mode 100644
index 000000000000..5c6512c1e1e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3-timings.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3-timings.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR3 SDRAM AC timing parameters for a given speed-bin
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: jedec,lpddr3-timings
+
+  reg:
+    maxItems: 1
+    description: |
+      Maximum DDR clock frequency for the speed-bin, in Hz.
+      Property is deprecated, use max-freq.
+    deprecated: true
+
+  max-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum DDR clock frequency for the speed-bin, in Hz.
+
+  min-freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Minimum DDR clock frequency for the speed-bin, in Hz.
+
+  tCKE:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      CKE minimum pulse width (HIGH and LOW pulse width) in pico seconds.
+
+  tCKESR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in pico seconds.
+
+  tFAW:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Four-bank activate window in pico seconds.
+
+  tMRD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Mode register set command delay in pico seconds.
+
+  tR2R-C2C:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Additional READ-to-READ delay in chip-to-chip cases in pico seconds.
+
+  tRAS:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row active time in pico seconds.
+
+  tRC:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      ACTIVATE-to-ACTIVATE command period in pico seconds.
+
+  tRCD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RAS-to-CAS delay in pico seconds.
+
+  tRFC:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Refresh Cycle time in pico seconds.
+
+  tRPab:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row precharge time (all banks) in pico seconds.
+
+  tRPpb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Row precharge time (single banks) in pico seconds.
+
+  tRRD:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Active bank A to active bank B in pico seconds.
+
+  tRTP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal READ to PRECHARGE command delay in pico seconds.
+
+  tW2W-C2C:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Additional WRITE-to-WRITE delay in chip-to-chip cases in pico seconds.
+
+  tWR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      WRITE recovery time in pico seconds.
+
+  tWTR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Internal WRITE-to-READ command delay in pico seconds.
+
+  tXP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Exit power-down to next valid command delay in pico seconds.
+
+  tXSR:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      SELF REFRESH exit to next valid command delay in pico seconds.
+
+required:
+  - compatible
+  - min-freq
+  - max-freq
+
+additionalProperties: false
+
+examples:
+  - |
+    lpddr3 {
+        timings {
+            compatible = "jedec,lpddr3-timings";
+            max-freq = <800000000>;
+            min-freq = <100000000>;
+            tCKE = <3750>;
+            tCKESR = <3750>;
+            tFAW = <25000>;
+            tMRD = <7000>;
+            tR2R-C2C = <0>;
+            tRAS = <23000>;
+            tRC = <33750>;
+            tRCD = <10000>;
+            tRFC = <65000>;
+            tRPab = <12000>;
+            tRPpb = <12000>;
+            tRRD = <6000>;
+            tRTP = <3750>;
+            tW2W-C2C = <0>;
+            tWR = <7500>;
+            tWTR = <3750>;
+            tXP = <3750>;
+            tXSR = <70000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
new file mode 100644
index 000000000000..e328a1195ba6
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr3.yaml
@@ -0,0 +1,243 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR3 SDRAM compliant to JEDEC JESD209-3
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - samsung,K3QF2F20DB
+          - const: jedec,lpddr3
+      - items:
+          - pattern: "^lpddr3-[0-9a-f]{2},[0-9a-f]{4}$"
+          - const: jedec,lpddr3
+
+  '#address-cells':
+    const: 1
+    deprecated: true
+
+  manufacturer-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Manufacturer ID value read from Mode Register 5.  The property is
+      deprecated, manufacturer should be derived from the compatible.
+    deprecated: true
+
+  '#size-cells':
+    const: 0
+    deprecated: true
+
+  tCKE-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      CKE minimum pulse width (HIGH and LOW pulse width) in terms of number
+      of clock cycles.
+
+  tCKESR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      CKE minimum pulse width during SELF REFRESH (low pulse width during
+      SELF REFRESH) in terms of number of clock cycles.
+
+  tDQSCK-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      DQS output data access time from CK_t/CK_c in terms of number of clock
+      cycles.
+
+  tFAW-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 63
+    description: |
+      Four-bank activate window in terms of number of clock cycles.
+
+  tMRD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Mode register set command delay in terms of number of clock cycles.
+
+  tR2R-C2C-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Additional READ-to-READ delay in chip-to-chip cases in terms of number
+      of clock cycles.
+
+  tRAS-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 63
+    description: |
+      Row active time in terms of number of clock cycles.
+
+  tRC-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 63
+    description: |
+      ACTIVATE-to-ACTIVATE command period in terms of number of clock cycles.
+
+  tRCD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      RAS-to-CAS delay in terms of number of clock cycles.
+
+  tRFC-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Refresh Cycle time in terms of number of clock cycles.
+
+  tRL-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+     READ data latency in terms of number of clock cycles.
+
+  tRPab-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Row precharge time (all banks) in terms of number of clock cycles.
+
+  tRPpb-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Row precharge time (single banks) in terms of number of clock cycles.
+
+  tRRD-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Active bank A to active bank B in terms of number of clock cycles.
+
+  tRTP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Internal READ to PRECHARGE command delay in terms of number of clock
+      cycles.
+
+  tW2W-C2C-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+    description: |
+      Additional WRITE-to-WRITE delay in chip-to-chip cases in terms of number
+      of clock cycles.
+
+  tWL-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      WRITE data latency in terms of number of clock cycles.
+
+  tWR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      WRITE recovery time in terms of number of clock cycles.
+
+  tWTR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    description: |
+      Internal WRITE-to-READ command delay in terms of number of clock cycles.
+
+  tXP-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 255
+    description: |
+      Exit power-down to next valid command delay in terms of number of clock
+      cycles.
+
+  tXSR-min-tck:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 1023
+    description: |
+      SELF REFRESH exit to next valid command delay in terms of number of clock
+      cycles.
+
+patternProperties:
+  "^timings((-[0-9])+|(@[0-9a-f]+))?$":
+    $ref: jedec,lpddr3-timings.yaml
+    description: |
+      The lpddr3 node may have one or more child nodes with timings.
+      Each timing node provides AC timing parameters of the device for a given
+      speed-bin. The user may provide the timings for as many speed-bins as is
+      required.
+
+required:
+  - compatible
+  - density
+  - io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    lpddr3 {
+        compatible = "samsung,K3QF2F20DB", "jedec,lpddr3";
+        density = <16384>;
+        io-width = <32>;
+
+        tCKE-min-tck = <2>;
+        tCKESR-min-tck = <2>;
+        tDQSCK-min-tck = <5>;
+        tFAW-min-tck = <5>;
+        tMRD-min-tck = <5>;
+        tR2R-C2C-min-tck = <0>;
+        tRAS-min-tck = <5>;
+        tRC-min-tck = <6>;
+        tRCD-min-tck = <3>;
+        tRFC-min-tck = <17>;
+        tRL-min-tck = <14>;
+        tRPab-min-tck = <2>;
+        tRPpb-min-tck = <2>;
+        tRRD-min-tck = <2>;
+        tRTP-min-tck = <2>;
+        tW2W-C2C-min-tck = <0>;
+        tWL-min-tck = <8>;
+        tWR-min-tck = <7>;
+        tWTR-min-tck = <2>;
+        tXP-min-tck = <2>;
+        tXSR-min-tck = <12>;
+
+        timings {
+            compatible = "jedec,lpddr3-timings";
+            max-freq = <800000000>;
+            min-freq = <100000000>;
+            tCKE = <3750>;
+            tCKESR = <3750>;
+            tFAW = <25000>;
+            tMRD = <7000>;
+            tR2R-C2C = <0>;
+            tRAS = <23000>;
+            tRC = <33750>;
+            tRCD = <10000>;
+            tRFC = <65000>;
+            tRPab = <12000>;
+            tRPpb = <12000>;
+            tRRD = <6000>;
+            tRTP = <3750>;
+            tW2W-C2C = <0>;
+            tWR = <7500>;
+            tWTR = <3750>;
+            tXP = <3750>;
+            tXSR = <70000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml
new file mode 100644
index 000000000000..a078892fecee
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr4.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR4 SDRAM compliant to JEDEC JESD209-4
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: "^lpddr4-[0-9a-f]{2},[0-9a-f]{4}$"
+      - const: jedec,lpddr4
+
+required:
+  - compatible
+  - density
+  - io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    lpddr {
+        compatible = "lpddr4-ff,0100", "jedec,lpddr4";
+        density = <8192>;
+        io-width = <16>;
+        revision-id = <1 0>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml
new file mode 100644
index 000000000000..e441dac5f154
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ddr/jedec,lpddr5.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LPDDR5 SDRAM compliant to JEDEC JESD209-5
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+allOf:
+  - $ref: jedec,lpddr-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - pattern: "^lpddr5-[0-9a-f]{2},[0-9a-f]{4}$"
+      - const: jedec,lpddr5
+
+  serial-id:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Serial IDs read from Mode Registers 47 through 54. One byte per uint32
+      cell (i.e. <MR47 MR48 MR49 MR50 MR51 MR52 MR53 MR54>).
+    maxItems: 8
+    items:
+      minimum: 0
+      maximum: 255
+
+required:
+  - compatible
+  - density
+  - io-width
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    lpddr {
+        compatible = "lpddr5-01,0200", "jedec,lpddr5";
+        density = <8192>;
+        io-width = <8>;
+        revision-id = <2 0>;
+        serial-id = <3 1 0 0 0 0 0 0>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
index c6e44f47ce7c..10a2d97e5f8b 100644
--- a/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/exynos-srom.yaml
@@ -38,6 +38,7 @@ properties:
 patternProperties:
   "^.*@[0-3],[a-f0-9]+$":
     type: object
+    additionalProperties: true
     description:
       The actual device nodes should be added as subnodes to the SROMc node.
       These subnodes, in addition to regular device specification, should
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/ddr.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/ddr.txt
deleted file mode 100644
index dde6d837083a..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/ddr.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Freescale DDR memory controller
-
-Properties:
-
-- compatible	: Should include "fsl,chip-memory-controller" where
-		  chip is the processor (bsc9132, mpc8572 etc.), or
-		  "fsl,qoriq-memory-controller".
-- reg		: Address and size of DDR controller registers
-- interrupts	: Error interrupt of DDR controller
-- little-endian	: Specifies little-endian access to registers
-		  If omitted, big-endian will be used.
-
-Example 1:
-
-	memory-controller@2000 {
-		compatible = "fsl,bsc9132-memory-controller";
-		reg = <0x2000 0x1000>;
-		interrupts = <16 2 1 8>;
-	};
-
-
-Example 2:
-
-	ddr1: memory-controller@8000 {
-		compatible = "fsl,qoriq-memory-controller-v4.7",
-				"fsl,qoriq-memory-controller";
-		reg = <0x8000 0x1000>;
-		interrupts = <16 2 1 23>;
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml
new file mode 100644
index 000000000000..84f778a99546
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ddr.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ddr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale DDR memory controller
+
+maintainers:
+  - Borislav Petkov <bp@alien8.de>
+  - York Sun <york.sun@nxp.com>
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,qoriq-memory-controller-v4.4
+              - fsl,qoriq-memory-controller-v4.5
+              - fsl,qoriq-memory-controller-v4.7
+              - fsl,qoriq-memory-controller-v5.0
+          - const: fsl,qoriq-memory-controller
+      - enum:
+          - fsl,bsc9132-memory-controller
+          - fsl,mpc8536-memory-controller
+          - fsl,mpc8540-memory-controller
+          - fsl,mpc8541-memory-controller
+          - fsl,mpc8544-memory-controller
+          - fsl,mpc8548-memory-controller
+          - fsl,mpc8555-memory-controller
+          - fsl,mpc8560-memory-controller
+          - fsl,mpc8568-memory-controller
+          - fsl,mpc8569-memory-controller
+          - fsl,mpc8572-memory-controller
+          - fsl,mpc8349-memory-controller
+          - fsl,p1020-memory-controller
+          - fsl,p1021-memory-controller
+          - fsl,p2020-memory-controller
+          - fsl,qoriq-memory-controller
+
+  interrupts:
+    maxItems: 1
+
+  little-endian:
+    description:
+      Specifies little-endian access to registers. If omitted, big-endian will
+      be used.
+    type: boolean
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@2000 {
+        compatible = "fsl,bsc9132-memory-controller";
+        reg = <0x2000 0x1000>;
+        interrupts = <16 2 1 8>;
+    };
+
+  - |
+    memory-controller@8000 {
+        compatible = "fsl,qoriq-memory-controller-v4.7",
+                     "fsl,qoriq-memory-controller";
+        reg = <0x8000 0x1000>;
+        interrupts = <16 2 1 23>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml
new file mode 100644
index 000000000000..3be1db30bf41
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ifc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: FSL/NXP Integrated Flash Controller
+
+maintainers:
+  - Li Yang <leoyang.li@nxp.com>
+
+description: |
+  NXP's integrated flash controller (IFC) is an advanced version of the
+  enhanced local bus controller which includes similar programming and signal
+  interfaces with an extended feature set. The IFC provides access to multiple
+  external memory types, such as NAND flash (SLC and MLC), NOR flash, EPROM,
+  SRAM and other memories where address and data are shared on a bus.
+
+properties:
+  $nodename:
+    pattern: "^memory-controller@[0-9a-f]+$"
+
+  compatible:
+    const: fsl,ifc
+
+  "#address-cells":
+    enum: [2, 3]
+    description: |
+      Should be either two or three.  The first cell is the chipselect
+      number, and the remaining cells are the offset into the chipselect.
+
+  "#size-cells":
+    enum: [1, 2]
+    description: |
+      Either one or two, depending on how large each chipselect can be.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    description: |
+      IFC may have one or two interrupts.  If two interrupt specifiers are
+      present, the first is the "common" interrupt (CM_EVTER_STAT), and the
+      second is the NAND interrupt (NAND_EVTER_STAT).  If there is only one,
+      that interrupt reports both types of event.
+
+  little-endian:
+    type: boolean
+    description: |
+      If this property is absent, the big-endian mode will be in use as default
+      for registers.
+
+  ranges:
+    description: |
+      Each range corresponds to a single chipselect, and covers the entire
+      access window as configured.
+
+patternProperties:
+  "^.*@[a-f0-9]+(,[a-f0-9]+)+$":
+    type: object
+    description: |
+      Child device nodes describe the devices connected to IFC such as NOR (e.g.
+      cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
+      like FPGAs, CPLDs, etc.
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        memory-controller@ffe1e000 {
+            compatible = "fsl,ifc";
+            #address-cells = <2>;
+            #size-cells = <1>;
+            reg = <0x0 0xffe1e000 0 0x2000>;
+            interrupts = <16 2 19 2>;
+            little-endian;
+
+            /* NOR, NAND Flashes and CPLD on board */
+            ranges = <0x0 0x0 0x0 0xee000000 0x02000000>,
+                     <0x1 0x0 0x0 0xffa00000 0x00010000>,
+                     <0x3 0x0 0x0 0xffb00000 0x00020000>;
+
+            flash@0,0 {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "cfi-flash";
+                reg = <0x0 0x0 0x2000000>;
+                bank-width = <2>;
+                device-width = <1>;
+
+                partition@0 {
+                    /* 32MB for user data */
+                    reg = <0x0 0x02000000>;
+                    label = "NOR Data";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt b/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
deleted file mode 100644
index 89427b018ba7..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/ifc.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Integrated Flash Controller
-
-Properties:
-- name : Should be ifc
-- compatible : should contain "fsl,ifc". The version of the integrated
-               flash controller can be found in the IFC_REV register at
-               offset zero.
-
-- #address-cells : Should be either two or three.  The first cell is the
-                   chipselect number, and the remaining cells are the
-                   offset into the chipselect.
-- #size-cells : Either one or two, depending on how large each chipselect
-                can be.
-- reg : Offset and length of the register set for the device
-- interrupts: IFC may have one or two interrupts.  If two interrupt
-              specifiers are present, the first is the "common"
-              interrupt (CM_EVTER_STAT), and the second is the NAND
-              interrupt (NAND_EVTER_STAT).  If there is only one,
-              that interrupt reports both types of event.
-
-- little-endian : If this property is absent, the big-endian mode will
-                  be in use as default for registers.
-
-- ranges : Each range corresponds to a single chipselect, and covers
-           the entire access window as configured.
-
-Child device nodes describe the devices connected to IFC such as NOR (e.g.
-cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
-like FPGAs, CPLDs, etc.
-
-Example:
-
-	ifc@ffe1e000 {
-		compatible = "fsl,ifc", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		reg = <0x0 0xffe1e000 0 0x2000>;
-		interrupts = <16 2 19 2>;
-		little-endian;
-
-		/* NOR, NAND Flashes and CPLD on board */
-		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
-			  0x1 0x0 0x0 0xffa00000 0x00010000
-			  0x3 0x0 0x0 0xffb00000 0x00020000>;
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x2000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				/* 32MB for user data */
-				reg = <0x0 0x02000000>;
-				label = "NOR Data";
-			};
-		};
-
-		flash@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,ifc-nand";
-			reg = <0x1 0x0 0x10000>;
-
-			partition@0 {
-				/* This location must not be altered  */
-				/* 1MB for u-boot Bootloader Image */
-				reg = <0x0 0x00100000>;
-				label = "NAND U-Boot Image";
-				read-only;
-			};
-		};
-
-		cpld@3,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1010rdb-cpld";
-			reg = <0x3 0x0 0x000001f>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
index 445e46feda69..519b123116dc 100644
--- a/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/fsl/imx8m-ddrc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: i.MX8M DDR Controller
 
 maintainers:
-  - Leonard Crestez <leonard.crestez@nxp.com>
+  - Peng Fan <peng.fan@nxp.com>
 
 description:
   The DDRC block is integrated in i.MX8M for interfacing with DDR based
@@ -47,7 +47,8 @@ properties:
       - const: apb
 
   operating-points-v2: true
-  opp-table: true
+  opp-table:
+    type: object
 
 required:
   - reg
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-peripherals.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-peripherals.yaml
new file mode 100644
index 000000000000..89ebe3979012
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc-peripherals.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc-peripherals.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs NAND / External Memory Controller (NEMC)
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  reg:
+    minItems: 1
+    maxItems: 255
+
+  ingenic,nemc-bus-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+    description: Specifies the bus width in bits.
+
+  ingenic,nemc-tAS:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Address setup time in nanoseconds.
+
+  ingenic,nemc-tAH:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Address hold time in nanoseconds.
+
+  ingenic,nemc-tBP:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Burst pitch time in nanoseconds.
+
+  ingenic,nemc-tAW:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Address wait time in nanoseconds.
+
+  ingenic,nemc-tSTRV:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Static memory recovery time in nanoseconds.
+
+required:
+  - reg
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
index fe0ce191a851..a02724221ff3 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/memory-controllers/ingenic,nemc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs NAND / External Memory Controller (NEMC) devicetree bindings
+title: Ingenic SoCs NAND / External Memory Controller (NEMC)
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
@@ -39,38 +39,6 @@ properties:
 patternProperties:
   ".*@[0-9]+$":
     type: object
-    properties:
-      reg:
-        minItems: 1
-        maxItems: 255
-
-      ingenic,nemc-bus-width:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [8, 16]
-        description: Specifies the bus width in bits.
-
-      ingenic,nemc-tAS:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Address setup time in nanoseconds.
-
-      ingenic,nemc-tAH:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Address hold time in nanoseconds.
-
-      ingenic,nemc-tBP:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Burst pitch time in nanoseconds.
-
-      ingenic,nemc-tAW:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Address wait time in nanoseconds.
-
-      ingenic,nemc-tSTRV:
-        $ref: /schemas/types.yaml#/definitions/uint32
-        description: Static memory recovery time in nanoseconds.
-
-    required:
-      - reg
 
 required:
   - compatible
@@ -84,7 +52,7 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
     #include <dt-bindings/gpio/gpio.h>
     nemc: memory-controller@13410000 {
       compatible = "ingenic,jz4780-nemc";
diff --git a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml
new file mode 100644
index 000000000000..3049d6bb0b1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx Expansion Bus Controller
+
+description: |
+  The IXP4xx expansion bus controller handles access to devices on the
+  memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
+  including IXP42x, IXP43x, IXP45x and IXP46x.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  $nodename:
+    pattern: '^bus@[0-9a-f]+$'
+
+  compatible:
+    items:
+      - enum:
+          - intel,ixp42x-expansion-bus-controller
+          - intel,ixp43x-expansion-bus-controller
+          - intel,ixp45x-expansion-bus-controller
+          - intel,ixp46x-expansion-bus-controller
+      - const: syscon
+
+  reg:
+    description: Control registers for the expansion bus, these are not
+      inside the memory range handled by the expansion bus.
+    maxItems: 1
+
+  native-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: The IXP4xx has a peculiar MMIO access scheme, as it changes
+      the access pattern for words (swizzling) on the bus depending on whether
+      the SoC is running in big-endian or little-endian mode. Thus the
+      registers must always be accessed using native endianness.
+
+  "#address-cells":
+    description: |
+      The first cell is the chip select number.
+      The second cell is the address offset within the bank.
+    const: 2
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+  dma-ranges: true
+
+patternProperties:
+  "^.*@[0-7],[0-9a-f]+$":
+    description: Devices attached to chip selects are represented as
+      subnodes.
+    type: object
+    $ref: /schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
+    additionalProperties: true
+
+required:
+  - compatible
+  - reg
+  - native-endian
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - dma-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    bus@50000000 {
+        compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
+        reg = <0xc4000000 0x28>;
+        native-endian;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <0 0x0 0x50000000 0x01000000>,
+                 <1 0x0 0x51000000 0x01000000>;
+        dma-ranges = <0 0x0 0x50000000 0x01000000>,
+                     <1 0x0 0x51000000 0x01000000>;
+        flash@0,0 {
+            compatible = "intel,ixp4xx-flash", "cfi-flash";
+            bank-width = <2>;
+            reg = <0 0x00000000 0x1000000>;
+            intel,ixp4xx-eb-t3 = <3>;
+            intel,ixp4xx-eb-cycle-type = <0>;
+            intel,ixp4xx-eb-byte-access-on-halfword = <1>;
+            intel,ixp4xx-eb-write-enable = <1>;
+            intel,ixp4xx-eb-byte-access = <0>;
+        };
+        serial@1,0 {
+            compatible = "exar,xr16l2551", "ns8250";
+            reg = <1 0x00000000 0x10>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            clock-frequency = <1843200>;
+            intel,ixp4xx-eb-t3 = <3>;
+            intel,ixp4xx-eb-cycle-type = <1>;
+            intel,ixp4xx-eb-write-enable = <1>;
+            intel,ixp4xx-eb-byte-access = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
new file mode 100644
index 000000000000..d1479a7b9c8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral properties for Intel IXP4xx Expansion Bus
+
+description:
+  The IXP4xx expansion bus controller handles access to devices on the
+  memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
+  including IXP42x, IXP43x, IXP45x and IXP46x.
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  intel,ixp4xx-eb-t1:
+    description: Address timing, extend address phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 3
+
+  intel,ixp4xx-eb-t2:
+    description: Setup chip select timing, extend setup phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 3
+
+  intel,ixp4xx-eb-t3:
+    description: Strobe timing, extend strobe phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+
+  intel,ixp4xx-eb-t4:
+    description: Hold timing, extend hold phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 3
+
+  intel,ixp4xx-eb-t5:
+    description: Recovery timing, extend recovery phase with n cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+
+  intel,ixp4xx-eb-cycle-type:
+    description: The type of cycles to use on the expansion bus for this
+      chip select. 0 = Intel cycles, 1 = Motorola cycles, 2 = HPI cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  intel,ixp4xx-eb-byte-access-on-halfword:
+    description: Allow byte read access on half word devices.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-hpi-hrdy-pol-high:
+    description: Set HPI HRDY polarity to active high when using HPI.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-mux-address-and-data:
+    description: Multiplex address and data on the data bus.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-ahb-split-transfers:
+    description: Enable AHB split transfers.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-write-enable:
+    description: Enable write cycles.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  intel,ixp4xx-eb-byte-access:
+    description: Expansion bus uses only 8 bits. The default is to use
+      16 bits.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml
index 14a6bc8f421f..9249624c4fa0 100644
--- a/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml
@@ -8,7 +8,7 @@ title: Marvell MVEBU SDRAM controller
 
 maintainers:
   - Jan Luebbe <jlu@pengutronix.de>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
new file mode 100644
index 000000000000..5acfcad12bb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/mc-peripheral-props.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/mc-peripheral-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral-specific properties for a Memory Controller bus.
+
+description:
+  Many Memory Controllers need to add properties to peripheral devices.
+  They could be common properties like reg or they could be controller
+  specific like delay in clock or data lines, etc. These properties need
+  to be defined in the peripheral node because they are per-peripheral
+  and there can be multiple peripherals attached to a controller. All
+  those properties are listed here. The controller specific properties
+  should go in their own separate schema that should be referenced
+  from here.
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  reg:
+    description: Bank number, base address and size of the device.
+
+  bank-width:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Bank width of the device, in bytes.
+    enum: [1, 2, 4]
+
+required:
+  - reg
+
+# The controller specific properties go here.
+allOf:
+  - $ref: st,stm32-fmc2-ebi-props.yaml#
+  - $ref: intel,ixp4xx-expansion-peripheral-props.yaml#
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml
new file mode 100644
index 000000000000..6ccdaf99c778
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,mt7621-memc.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/mediatek,mt7621-memc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT7621 SDRAM controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - const: mediatek,mt7621-memc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@5000 {
+        compatible = "mediatek,mt7621-memc", "syscon";
+        reg = <0x5000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
index e87e4382807c..2f36ac23604c 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -16,7 +16,7 @@ description: |
   MediaTek SMI have two generations of HW architecture, here is the list
   which generation the SoCs use:
   generation 1: mt2701 and mt7623.
-  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183 and mt8192.
+  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8186, mt8188, mt8192 and mt8195.
 
   There's slight differences between the two SMI, for generation 2, the
   register which control the iommu port is at each larb's register base. But
@@ -32,10 +32,18 @@ properties:
           - mediatek,mt2701-smi-common
           - mediatek,mt2712-smi-common
           - mediatek,mt6779-smi-common
+          - mediatek,mt6795-smi-common
           - mediatek,mt8167-smi-common
           - mediatek,mt8173-smi-common
           - mediatek,mt8183-smi-common
+          - mediatek,mt8186-smi-common
+          - mediatek,mt8188-smi-common-vdo
+          - mediatek,mt8188-smi-common-vpp
           - mediatek,mt8192-smi-common
+          - mediatek,mt8195-smi-common-vdo
+          - mediatek,mt8195-smi-common-vpp
+          - mediatek,mt8195-smi-sub-common
+          - mediatek,mt8365-smi-common
 
       - description: for mt7623
         items:
@@ -65,6 +73,10 @@ properties:
     minItems: 2
     maxItems: 4
 
+  mediatek,smi:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the smi-common node above. Only for sub-common.
+
 required:
   - compatible
   - reg
@@ -81,30 +93,54 @@ allOf:
               - mediatek,mt2701-smi-common
     then:
       properties:
-        clock:
-          items:
-            minItems: 3
-            maxItems: 3
+        clocks:
+          minItems: 3
+          maxItems: 3
         clock-names:
           items:
             - const: apb
             - const: smi
             - const: async
 
+  - if:  # only for sub common
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8195-smi-sub-common
+    then:
+      required:
+        - mediatek,smi
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: apb
+            - const: smi
+            - const: gals0
+    else:
+      properties:
+        mediatek,smi: false
+
   - if:  # for gen2 HW that have gals
       properties:
         compatible:
           enum:
             - mediatek,mt6779-smi-common
             - mediatek,mt8183-smi-common
+            - mediatek,mt8186-smi-common
             - mediatek,mt8192-smi-common
+            - mediatek,mt8195-smi-common-vdo
+            - mediatek,mt8195-smi-common-vpp
+            - mediatek,mt8365-smi-common
 
     then:
       properties:
-        clock:
-          items:
-            minItems: 4
-            maxItems: 4
+        clocks:
+          minItems: 4
+          maxItems: 4
         clock-names:
           items:
             - const: apb
@@ -112,12 +148,20 @@ allOf:
             - const: gals0
             - const: gals1
 
-    else:  # for gen2 HW that don't have gals
+  - if:  # for gen2 HW that don't have gals
       properties:
-        clock:
-          items:
-            minItems: 2
-            maxItems: 2
+        compatible:
+          enum:
+            - mediatek,mt2712-smi-common
+            - mediatek,mt6795-smi-common
+            - mediatek,mt8167-smi-common
+            - mediatek,mt8173-smi-common
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
         clock-names:
           items:
             - const: apb
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 2353f6cf3c80..aee7f6cf1300 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -20,16 +20,24 @@ properties:
           - mediatek,mt2701-smi-larb
           - mediatek,mt2712-smi-larb
           - mediatek,mt6779-smi-larb
+          - mediatek,mt6795-smi-larb
           - mediatek,mt8167-smi-larb
           - mediatek,mt8173-smi-larb
           - mediatek,mt8183-smi-larb
+          - mediatek,mt8186-smi-larb
+          - mediatek,mt8188-smi-larb
           - mediatek,mt8192-smi-larb
+          - mediatek,mt8195-smi-larb
 
       - description: for mt7623
         items:
           - const: mediatek,mt7623-smi-larb
           - const: mediatek,mt2701-smi-larb
 
+      - items:
+          - const: mediatek,mt8365-smi-larb
+          - const: mediatek,mt8186-smi-larb
+
   reg:
     maxItems: 1
 
@@ -51,7 +59,7 @@ properties:
     maxItems: 1
 
   mediatek,smi:
-    $ref: /schemas/types.yaml#/definitions/phandle-array
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: a phandle to the smi_common node.
 
   mediatek,larb-id:
@@ -74,14 +82,17 @@ allOf:
         compatible:
           enum:
             - mediatek,mt8183-smi-larb
+            - mediatek,mt8186-smi-larb
+            - mediatek,mt8188-smi-larb
+            - mediatek,mt8195-smi-larb
 
     then:
       properties:
-        clock:
-          items:
-            minItems: 3
-            maxItems: 3
+        clocks:
+          minItems: 2
+          maxItems: 3
         clock-names:
+          minItems: 2
           items:
             - const: apb
             - const: smi
@@ -89,10 +100,9 @@ allOf:
 
     else:
       properties:
-        clock:
-          items:
-            minItems: 2
-            maxItems: 2
+        clocks:
+          minItems: 2
+          maxItems: 2
         clock-names:
           items:
             - const: apb
@@ -106,8 +116,10 @@ allOf:
               - mediatek,mt2701-smi-larb
               - mediatek,mt2712-smi-larb
               - mediatek,mt6779-smi-larb
-              - mediatek,mt8167-smi-larb
+              - mediatek,mt8186-smi-larb
+              - mediatek,mt8188-smi-larb
               - mediatek,mt8192-smi-larb
+              - mediatek,mt8195-smi-larb
 
     then:
       required:
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
index 9163c3f12a85..f5f03bf36413 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.yaml
@@ -50,6 +50,7 @@ properties:
 patternProperties:
   "^emc-timings-[0-9]+$":
     type: object
+    additionalProperties: false
     properties:
       nvidia,ram-code:
         $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
index 611bda38d187..935d63d181d9 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml
@@ -31,12 +31,19 @@ properties:
       - enum:
           - nvidia,tegra186-mc
           - nvidia,tegra194-mc
+          - nvidia,tegra234-mc
 
   reg:
-    maxItems: 1
+    minItems: 6
+    maxItems: 18
+
+  reg-names:
+    minItems: 6
+    maxItems: 18
 
   interrupts:
-    maxItems: 1
+    items:
+      - description: MC general interrupt
 
   "#address-cells":
     const: 2
@@ -48,6 +55,9 @@ properties:
 
   dma-ranges: true
 
+  "#interconnect-cells":
+    const: 1
+
 patternProperties:
   "^external-memory-controller@[0-9a-f]+$":
     description:
@@ -63,12 +73,15 @@ patternProperties:
           - enum:
               - nvidia,tegra186-emc
               - nvidia,tegra194-emc
+              - nvidia,tegra234-emc
 
       reg:
-        maxItems: 1
+        minItems: 1
+        maxItems: 2
 
       interrupts:
-        maxItems: 1
+        items:
+          - description: EMC general interrupt
 
       clocks:
         items:
@@ -78,20 +91,145 @@ patternProperties:
         items:
           - const: emc
 
+      "#interconnect-cells":
+        const: 0
+
       nvidia,bpmp:
         $ref: /schemas/types.yaml#/definitions/phandle
         description:
           phandle of the node representing the BPMP
 
+    allOf:
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra186-emc
+        then:
+          properties:
+            reg:
+              maxItems: 1
+
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra194-emc
+        then:
+          properties:
+            reg:
+              minItems: 2
+
+      - if:
+          properties:
+            compatible:
+              const: nvidia,tegra234-emc
+        then:
+          properties:
+            reg:
+              minItems: 2
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - reg
+      - interrupts
+      - clocks
+      - clock-names
+      - "#interconnect-cells"
+      - nvidia,bpmp
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra186-mc
+    then:
+      properties:
+        reg:
+          maxItems: 6
+          description: 5 memory controller channels and 1 for stream-id registers
+
+        reg-names:
+          items:
+            - const: sid
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra194-mc
+    then:
+      properties:
+        reg:
+          minItems: 18
+          description: 17 memory controller channels and 1 for stream-id registers
+
+        reg-names:
+          items:
+            - const: sid
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
+            - const: ch4
+            - const: ch5
+            - const: ch6
+            - const: ch7
+            - const: ch8
+            - const: ch9
+            - const: ch10
+            - const: ch11
+            - const: ch12
+            - const: ch13
+            - const: ch14
+            - const: ch15
+
+  - if:
+      properties:
+        compatible:
+          const: nvidia,tegra234-mc
+    then:
+      properties:
+        reg:
+          minItems: 18
+          description: 17 memory controller channels and 1 for stream-id registers
+
+        reg-names:
+          items:
+            - const: sid
+            - const: broadcast
+            - const: ch0
+            - const: ch1
+            - const: ch2
+            - const: ch3
+            - const: ch4
+            - const: ch5
+            - const: ch6
+            - const: ch7
+            - const: ch8
+            - const: ch9
+            - const: ch10
+            - const: ch11
+            - const: ch12
+            - const: ch13
+            - const: ch14
+            - const: ch15
+
+additionalProperties: false
+
 required:
   - compatible
   - reg
+  - reg-names
   - interrupts
   - "#address-cells"
   - "#size-cells"
 
-additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/clock/tegra186-clock.h>
@@ -103,7 +241,13 @@ examples:
 
         memory-controller@2c00000 {
             compatible = "nvidia,tegra186-mc";
-            reg = <0x0 0x02c00000 0x0 0xb0000>;
+            reg = <0x0 0x02c00000 0x0 0x10000>,    /* MC-SID */
+                  <0x0 0x02c10000 0x0 0x10000>,    /* Broadcast channel */
+                  <0x0 0x02c20000 0x0 0x10000>,    /* MC0 */
+                  <0x0 0x02c30000 0x0 0x10000>,    /* MC1 */
+                  <0x0 0x02c40000 0x0 0x10000>,    /* MC2 */
+                  <0x0 0x02c50000 0x0 0x10000>;    /* MC3 */
+            reg-names = "sid", "broadcast", "ch0", "ch1", "ch2", "ch3";
             interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 
             #address-cells = <2>;
@@ -124,12 +268,9 @@ examples:
                 clocks = <&bpmp TEGRA186_CLK_EMC>;
                 clock-names = "emc";
 
+                #interconnect-cells = <0>;
+
                 nvidia,bpmp = <&bpmp>;
             };
         };
     };
-
-    bpmp: bpmp {
-        compatible = "nvidia,tegra186-bpmp";
-        #clock-cells = <1>;
-    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
index cac6842dc8f1..2fa44951cfde 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.yaml
@@ -164,12 +164,20 @@ patternProperties:
       "#size-cells":
         const: 0
 
+      lpddr2:
+        $ref: "ddr/jedec,lpddr2.yaml#"
+        type: object
+
     patternProperties:
       "^emc-table@[0-9]+$":
         $ref: "#/$defs/emc-table"
 
-    required:
-      - nvidia,ram-code
+    oneOf:
+      - required:
+          - nvidia,ram-code
+
+      - required:
+          - lpddr2
 
     additionalProperties: false
 
@@ -227,4 +235,15 @@ examples:
                         0x00000000 0x00000000 0x00000000 0x00000000>;
             };
         };
+
+        emc-tables@1 {
+            reg = <1>;
+
+            lpddr2 {
+                compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+                revision-id1 = <1>;
+                density = <2048>;
+                io-width = <16>;
+            };
+        };
     };
diff --git a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt b/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
deleted file mode 100644
index c1359f4d48d7..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
+++ /dev/null
@@ -1,157 +0,0 @@
-Device tree bindings for OMAP general purpose memory controllers (GPMC)
-
-The actual devices are instantiated from the child nodes of a GPMC node.
-
-Required properties:
-
- - compatible:		Should be set to one of the following:
-
-			ti,omap2420-gpmc (omap2420)
-			ti,omap2430-gpmc (omap2430)
-			ti,omap3430-gpmc (omap3430 & omap3630)
-			ti,omap4430-gpmc (omap4430 & omap4460 & omap543x)
-			ti,am3352-gpmc   (am335x devices)
-
- - reg:			A resource specifier for the register space
-			(see the example below)
- - ti,hwmods:		Should be set to "ti,gpmc" until the DT transition is
-			completed.
- - #address-cells:	Must be set to 2 to allow memory address translation
- - #size-cells:		Must be set to 1 to allow CS address passing
- - gpmc,num-cs:		The maximum number of chip-select lines that controller
-			can support.
- - gpmc,num-waitpins:	The maximum number of wait pins that controller can
-			support.
- - ranges:		Must be set up to reflect the memory layout with four
-			integer values for each chip-select line in use:
-
-			   <cs-number> 0 <physical address of mapping> <size>
-
-			Currently, calculated values derived from the contents
-			of the per-CS register GPMC_CONFIG7 (as set up by the
-			bootloader) are used for the physical address decoding.
-			As this will change in the future, filling correct
-			values here is a requirement.
- - interrupt-controller: The GPMC driver implements and interrupt controller for
-			the NAND events "fifoevent" and "termcount" plus the
-			rising/falling edges on the GPMC_WAIT pins.
-			The interrupt number mapping is as follows
-			0 - NAND_fifoevent
-			1 - NAND_termcount
-			2 - GPMC_WAIT0 pin edge
-			3 - GPMC_WAIT1 pin edge, and so on.
- - interrupt-cells:	Must be set to 2
- - gpio-controller:	The GPMC driver implements a GPIO controller for the
-			GPMC WAIT pins that can be used as general purpose inputs.
-			0 maps to GPMC_WAIT0 pin.
- - gpio-cells:		Must be set to 2
-
-Required properties when using NAND prefetch dma:
- - dmas			GPMC NAND prefetch dma channel
- - dma-names		Must be set to "rxtx"
-
-Timing properties for child nodes. All are optional and default to 0.
-
- - gpmc,sync-clk-ps:	Minimum clock period for synchronous mode, in picoseconds
-
- Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2:
- - gpmc,cs-on-ns:	Assertion time
- - gpmc,cs-rd-off-ns:	Read deassertion time
- - gpmc,cs-wr-off-ns:	Write deassertion time
-
- ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3:
- - gpmc,adv-on-ns:	Assertion time
- - gpmc,adv-rd-off-ns:	Read deassertion time
- - gpmc,adv-wr-off-ns:	Write deassertion time
- - gpmc,adv-aad-mux-on-ns:	Assertion time for AAD
- - gpmc,adv-aad-mux-rd-off-ns:	Read deassertion time for AAD
- - gpmc,adv-aad-mux-wr-off-ns:	Write deassertion time for AAD
-
- WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
- - gpmc,we-on-ns	Assertion time
- - gpmc,we-off-ns:	Deassertion time
-
- OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
- - gpmc,oe-on-ns:	Assertion time
- - gpmc,oe-off-ns:	Deassertion time
- - gpmc,oe-aad-mux-on-ns:	Assertion time for AAD
- - gpmc,oe-aad-mux-off-ns:	Deassertion time for AAD
-
- Access time and cycle time timings (in nanoseconds) corresponding to
- GPMC_CONFIG5:
- - gpmc,page-burst-access-ns: 	Multiple access word delay
- - gpmc,access-ns:		Start-cycle to first data valid delay
- - gpmc,rd-cycle-ns:		Total read cycle time
- - gpmc,wr-cycle-ns:		Total write cycle time
- - gpmc,bus-turnaround-ns:	Turn-around time between successive accesses
- - gpmc,cycle2cycle-delay-ns:	Delay between chip-select pulses
- - gpmc,clk-activation-ns: 	GPMC clock activation time
- - gpmc,wait-monitoring-ns:	Start of wait monitoring with regard to valid
-				data
-
-Boolean timing parameters. If property is present parameter enabled and
-disabled if omitted:
- - gpmc,adv-extra-delay:	ADV signal is delayed by half GPMC clock
- - gpmc,cs-extra-delay:		CS signal is delayed by half GPMC clock
- - gpmc,cycle2cycle-diffcsen:	Add "cycle2cycle-delay" between successive
-				accesses to a different CS
- - gpmc,cycle2cycle-samecsen:	Add "cycle2cycle-delay" between successive
-				accesses to the same CS
- - gpmc,oe-extra-delay:		OE signal is delayed by half GPMC clock
- - gpmc,we-extra-delay:		WE signal is delayed by half GPMC clock
- - gpmc,time-para-granularity:	Multiply all access times by 2
-
-The following are only applicable to OMAP3+ and AM335x:
- - gpmc,wr-access-ns:		In synchronous write mode, for single or
-				burst accesses, defines the number of
-				GPMC_FCLK cycles from start access time
-				to the GPMC_CLK rising edge used by the
-				memory device for the first data capture.
- - gpmc,wr-data-mux-bus-ns:	In address-data multiplex mode, specifies
-				the time when the first data is driven on
-				the address-data bus.
-
-GPMC chip-select settings properties for child nodes. All are optional.
-
-- gpmc,burst-length	Page/burst length. Must be 4, 8 or 16.
-- gpmc,burst-wrap	Enables wrap bursting
-- gpmc,burst-read	Enables read page/burst mode
-- gpmc,burst-write	Enables write page/burst mode
-- gpmc,device-width	Total width of device(s) connected to a GPMC
-			chip-select in bytes. The GPMC supports 8-bit
-			and 16-bit devices and so this property must be
-			1 or 2.
-- gpmc,mux-add-data	Address and data multiplexing configuration.
-			Valid values are 1 for address-address-data
-			multiplexing mode and 2 for address-data
-			multiplexing mode.
-- gpmc,sync-read	Enables synchronous read. Defaults to asynchronous
-			is this is not set.
-- gpmc,sync-write	Enables synchronous writes. Defaults to asynchronous
-			is this is not set.
-- gpmc,wait-pin		Wait-pin used by client. Must be less than
-			"gpmc,num-waitpins".
-- gpmc,wait-on-read	Enables wait monitoring on reads.
-- gpmc,wait-on-write	Enables wait monitoring on writes.
-
-Example for an AM33xx board:
-
-	gpmc: gpmc@50000000 {
-		compatible = "ti,am3352-gpmc";
-		ti,hwmods = "gpmc";
-		reg = <0x50000000 0x2000>;
-		interrupts = <100>;
-		dmas = <&edma 52 0>;
-		dma-names = "rxtx";
-		gpmc,num-cs = <8>;
-		gpmc,num-waitpins = <2>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		/* child nodes go here */
-	};
diff --git a/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml
index 9566b3421f03..0c511ab906bf 100644
--- a/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/qca,ath79-ddr-controller.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Atheros AR7xxx/AR9xxx DDR controller
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   The DDR controller of the AR7xxx and AR9xxx families provides an interface to
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml
index 7056ccb7eb30..8e3822314b25 100644
--- a/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,dbsc.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/memory-controllers/renesas,dbsc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/memory-controllers/renesas,dbsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas DDR Bus Controllers
 
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml
deleted file mode 100644
index 2b18cef99511..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/renesas,h8300-bsc.yaml
+++ /dev/null
@@ -1,35 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/memory-controllers/renesas,h8300-bsc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: H8/300 bus controller
-
-maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
-  - Yoshinori Sato <ysato@users.sourceforge.jp>
-
-properties:
-  compatible:
-    items:
-      - enum:
-          - renesas,h8300h-bsc
-          - renesas,h8s-bsc
-      - const: renesas,h8300-bsc
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  - |
-    memory-controller@fee01e {
-        compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc";
-        reg = <0xfee01e 8>;
-    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
index d25072c414e4..56e62cd0b36a 100644
--- a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
@@ -20,20 +20,39 @@ description: |
   - if it contains "cfi-flash", then HyperFlash is used.
 
 allOf:
-  - $ref: "/schemas/spi/spi-controller.yaml#"
+  - $ref: /schemas/spi/spi-controller.yaml#
 
 properties:
   compatible:
-    items:
-      - enum:
-          - renesas,r8a774a1-rpc-if       # RZ/G2M
-          - renesas,r8a774b1-rpc-if       # RZ/G2N
-          - renesas,r8a774c0-rpc-if       # RZ/G2E
-          - renesas,r8a774e1-rpc-if       # RZ/G2H
-          - renesas,r8a77970-rpc-if       # R-Car V3M
-          - renesas,r8a77980-rpc-if       # R-Car V3H
-          - renesas,r8a77995-rpc-if       # R-Car D3
-      - const: renesas,rcar-gen3-rpc-if   # a generic R-Car gen3 or RZ/G2 device
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r8a774a1-rpc-if       # RZ/G2M
+              - renesas,r8a774b1-rpc-if       # RZ/G2N
+              - renesas,r8a774c0-rpc-if       # RZ/G2E
+              - renesas,r8a774e1-rpc-if       # RZ/G2H
+              - renesas,r8a7795-rpc-if        # R-Car H3
+              - renesas,r8a7796-rpc-if        # R-Car M3-W
+              - renesas,r8a77961-rpc-if       # R-Car M3-W+
+              - renesas,r8a77965-rpc-if       # R-Car M3-N
+              - renesas,r8a77970-rpc-if       # R-Car V3M
+              - renesas,r8a77980-rpc-if       # R-Car V3H
+              - renesas,r8a77990-rpc-if       # R-Car E3
+              - renesas,r8a77995-rpc-if       # R-Car D3
+              - renesas,r8a779a0-rpc-if       # R-Car V3U
+          - const: renesas,rcar-gen3-rpc-if   # a generic R-Car gen3 or RZ/G2{E,H,M,N} device
+
+      - items:
+          - enum:
+              - renesas,r8a779g0-rpc-if       # R-Car V4H
+          - const: renesas,rcar-gen4-rpc-if   # a generic R-Car gen4 device
+
+      - items:
+          - enum:
+              - renesas,r9a07g043-rpc-if      # RZ/G2UL
+              - renesas,r9a07g044-rpc-if      # RZ/G2{L,LC}
+              - renesas,r9a07g054-rpc-if      # RZ/V2L
+          - const: renesas,rzg2l-rpc-if
 
   reg:
     items:
@@ -47,7 +66,9 @@ properties:
       - const: dirmap
       - const: wbuf
 
-  clocks:
+  clocks: true
+
+  interrupts:
     maxItems: 1
 
   power-domains:
@@ -66,8 +87,6 @@ patternProperties:
             - cfi-flash
             - jedec,spi-nor
 
-unevaluatedProperties: false
-
 required:
   - compatible
   - reg
@@ -78,6 +97,26 @@ required:
   - '#address-cells'
   - '#size-cells'
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,rzg2l-rpc-if
+then:
+  properties:
+    clocks:
+      items:
+        - description: SPI Multi IO Register access clock (SPI_CLK2)
+        - description: SPI Multi IO Main clock (SPI_CLK).
+
+else:
+  properties:
+    clocks:
+      maxItems: 1
+
+unevaluatedProperties: false
+
 examples:
   - |
     #include <dt-bindings/clock/renesas-cpg-mssr.h>
diff --git a/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml
new file mode 100644
index 000000000000..fb4920397d08
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/rockchip,rk3399-dmc.yaml
@@ -0,0 +1,384 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# %YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/rockchip,rk3399-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip rk3399 DMC (Dynamic Memory Controller) device
+
+maintainers:
+  - Brian Norris <briannorris@chromium.org>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3399-dmc
+
+  devfreq-events:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Node to get DDR loading. Refer to
+      Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: dmc_clk
+
+  operating-points-v2: true
+
+  center-supply:
+    description:
+      DMC regulator supply.
+
+  rockchip,pmu:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "PMU general register files".
+
+  interrupts:
+    maxItems: 1
+    description:
+      The CPU interrupt number. It should be a DCF interrupt. When DDR DVFS
+      finishes, a DCF interrupt is triggered.
+
+  rockchip,ddr3_speed_bin:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      For values, reference include/dt-bindings/clock/rk3399-ddr.h. Selects the
+      DDR3 cl-trp-trcd type. It must be set according to "Speed Bin" in DDR3
+      datasheet; DO NOT use a smaller "Speed Bin" than specified for the DDR3
+      being used.
+
+  rockchip,pd_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Configure the PD_IDLE value. Defines the power-down idle period in which
+      memories are placed into power-down mode if bus is idle for PD_IDLE DFI
+      clock cycles.
+      See also rockchip,pd-idle-ns.
+
+  rockchip,sr_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Configure the SR_IDLE value. Defines the self-refresh idle period in
+      which memories are placed into self-refresh mode if bus is idle for
+      SR_IDLE * 1024 DFI clock cycles (DFI clocks freq is half of DRAM clock).
+      See also rockchip,sr-idle-ns.
+    default: 0
+
+  rockchip,sr_mc_gate_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the memory self-refresh and controller clock gating idle period.
+      Memories are placed into self-refresh mode and memory controller clock
+      arg gating started if bus is idle for sr_mc_gate_idle*1024 DFI clock
+      cycles.
+      See also rockchip,sr-mc-gate-idle-ns.
+
+  rockchip,srpd_lite_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the self-refresh power down idle period in which memories are
+      placed into self-refresh power down mode if bus is idle for
+      srpd_lite_idle * 1024 DFI clock cycles. This parameter is for LPDDR4
+      only.
+      See also rockchip,srpd-lite-idle-ns.
+
+  rockchip,standby_idle:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the standby idle period in which memories are placed into
+      self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
+      if bus is idle for standby_idle * DFI clock cycles.
+      See also rockchip,standby-idle-ns.
+
+  rockchip,dram_dll_dis_freq:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Defines the DDR3 DLL bypass frequency in MHz. When DDR frequency is less
+      than DRAM_DLL_DISB_FREQ, DDR3 DLL will be bypassed.
+      Note: if DLL was bypassed, the odt will also stop working.
+
+  rockchip,phy_dll_dis_freq:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Defines the PHY dll bypass frequency in MHz (Mega Hz). When DDR frequency
+      is less than DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
+      Note: PHY DLL and PHY ODT are independent.
+
+  rockchip,auto_pd_dis_freq:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Defines the auto PD disable frequency in MHz.
+
+  rockchip,ddr3_odt_dis_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000000  # In case anyone thought this was MHz.
+    description:
+      When the DRAM type is DDR3, this parameter defines the ODT disable
+      frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq,
+      the ODT on the DRAM side and controller side are both disabled.
+
+  rockchip,ddr3_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the DRAM side drive
+      strength in ohms.
+    default: 40
+
+  rockchip,ddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the DRAM side ODT
+      strength in ohms.
+    default: 120
+
+  rockchip,phy_ddr3_ca_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the phy side CA line
+      (incluing command line, address line and clock line) drive strength.
+    default: 40
+
+  rockchip,phy_ddr3_dq_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the PHY side DQ line
+      (including DQS/DQ/DM line) drive strength.
+    default: 40
+
+  rockchip,phy_ddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is DDR3, this parameter defines the PHY side ODT
+      strength.
+    default: 240
+
+  rockchip,lpddr3_odt_dis_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000000  # In case anyone thought this was MHz.
+    description:
+      When the DRAM type is LPDDR3, this parameter defines then ODT disable
+      frequency in Hz. When DDR frequency is less then ddr3_odt_dis_freq, the
+      ODT on the DRAM side and controller side are both disabled.
+
+  rockchip,lpddr3_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the DRAM side drive
+      strength in ohms.
+    default: 34
+
+  rockchip,lpddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the DRAM side ODT
+      strength in ohms.
+    default: 240
+
+  rockchip,phy_lpddr3_ca_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the PHY side CA line
+      (including command line, address line and clock line) drive strength.
+    default: 40
+
+  rockchip,phy_lpddr3_dq_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR3, this parameter defines the PHY side DQ line
+      (including DQS/DQ/DM line) drive strength.
+    default: 40
+
+  rockchip,phy_lpddr3_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When dram type is LPDDR3, this parameter define the phy side odt
+      strength, default value is 240.
+
+  rockchip,lpddr4_odt_dis_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1000000  # In case anyone thought this was MHz.
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the ODT disable
+      frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq,
+      the ODT on the DRAM side and controller side are both disabled.
+
+  rockchip,lpddr4_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the DRAM side drive
+      strength in ohms.
+    default: 60
+
+  rockchip,lpddr4_dq_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
+      DQS/DQ line strength in ohms.
+    default: 40
+
+  rockchip,lpddr4_ca_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
+      CA line strength in ohms.
+    default: 40
+
+  rockchip,phy_lpddr4_ca_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side CA line
+      (including command address line) drive strength.
+    default: 40
+
+  rockchip,phy_lpddr4_ck_cs_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side clock
+      line and CS line drive strength.
+    default: 80
+
+  rockchip,phy_lpddr4_dq_drv:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side DQ line
+      (including DQS/DQ/DM line) drive strength.
+    default: 80
+
+  rockchip,phy_lpddr4_odt:
+    deprecated: true
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When the DRAM type is LPDDR4, this parameter defines the PHY side ODT
+      strength.
+    default: 60
+
+  rockchip,pd-idle-ns:
+    description:
+      Configure the PD_IDLE value in nanoseconds. Defines the power-down idle
+      period in which memories are placed into power-down mode if bus is idle
+      for PD_IDLE nanoseconds.
+
+  rockchip,sr-idle-ns:
+    description:
+      Configure the SR_IDLE value in nanoseconds. Defines the self-refresh idle
+      period in which memories are placed into self-refresh mode if bus is idle
+      for SR_IDLE nanoseconds.
+    default: 0
+
+  rockchip,sr-mc-gate-idle-ns:
+    description:
+      Defines the memory self-refresh and controller clock gating idle period in nanoseconds.
+      Memories are placed into self-refresh mode and memory controller clock
+      arg gating started if bus is idle for sr_mc_gate_idle nanoseconds.
+
+  rockchip,srpd-lite-idle-ns:
+    description:
+      Defines the self-refresh power down idle period in which memories are
+      placed into self-refresh power down mode if bus is idle for
+      srpd_lite_idle nanoseonds. This parameter is for LPDDR4 only.
+
+  rockchip,standby-idle-ns:
+    description:
+      Defines the standby idle period in which memories are placed into
+      self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
+      if bus is idle for standby_idle nanoseconds.
+
+  rockchip,pd-idle-dis-freq-hz:
+    description:
+      Defines the power-down idle disable frequency in Hz. When the DDR
+      frequency is greater than pd-idle-dis-freq, power-down idle is disabled.
+      See also rockchip,pd-idle-ns.
+
+  rockchip,sr-idle-dis-freq-hz:
+    description:
+      Defines the self-refresh idle disable frequency in Hz. When the DDR
+      frequency is greater than sr-idle-dis-freq, self-refresh idle is
+      disabled. See also rockchip,sr-idle-ns.
+
+  rockchip,sr-mc-gate-idle-dis-freq-hz:
+    description:
+      Defines the self-refresh and memory-controller clock gating disable
+      frequency in Hz. When the DDR frequency is greater than
+      sr-mc-gate-idle-dis-freq, the clock will not be gated when idle. See also
+      rockchip,sr-mc-gate-idle-ns.
+
+  rockchip,srpd-lite-idle-dis-freq-hz:
+    description:
+      Defines the self-refresh power down idle disable frequency in Hz. When
+      the DDR frequency is greater than srpd-lite-idle-dis-freq, memory will
+      not be placed into self-refresh power down mode when idle. See also
+      rockchip,srpd-lite-idle-ns.
+
+  rockchip,standby-idle-dis-freq-hz:
+    description:
+      Defines the standby idle disable frequency in Hz. When the DDR frequency
+      is greater than standby-idle-dis-freq, standby idle is disabled. See also
+      rockchip,standby-idle-ns.
+
+required:
+  - compatible
+  - devfreq-events
+  - clocks
+  - clock-names
+  - operating-points-v2
+  - center-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    memory-controller {
+      compatible = "rockchip,rk3399-dmc";
+      devfreq-events = <&dfi>;
+      rockchip,pmu = <&pmu>;
+      interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_DDRC>;
+      clock-names = "dmc_clk";
+      operating-points-v2 = <&dmc_opp_table>;
+      center-supply = <&ppvar_centerlogic>;
+      rockchip,pd-idle-ns = <160>;
+      rockchip,sr-idle-ns = <10240>;
+      rockchip,sr-mc-gate-idle-ns = <40960>;
+      rockchip,srpd-lite-idle-ns = <61440>;
+      rockchip,standby-idle-ns = <81920>;
+      rockchip,ddr3_odt_dis_freq = <333000000>;
+      rockchip,lpddr3_odt_dis_freq = <333000000>;
+      rockchip,lpddr4_odt_dis_freq = <333000000>;
+      rockchip,pd-idle-dis-freq-hz = <1000000000>;
+      rockchip,sr-idle-dis-freq-hz = <1000000000>;
+      rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>;
+      rockchip,srpd-lite-idle-dis-freq-hz = <0>;
+      rockchip,standby-idle-dis-freq-hz = <928000000>;
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
index 6f4fd5814bf4..783ac984d898 100644
--- a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
@@ -9,7 +9,7 @@ title: |
   Controller device
 
 maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
   - Lukasz Luba <lukasz.luba@arm.com>
 
 description: |
@@ -42,16 +42,18 @@ properties:
     maxItems: 8
 
   devfreq-events:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     minItems: 1
     maxItems: 16
+    items:
+      maxItems: 1
     description: phandles of the PPMU events used by the controller.
 
   device-handle:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       phandle of the connected DRAM memory device. For more information please
-      refer to documentation file: Documentation/devicetree/bindings/ddr/lpddr3.txt
+      refer to jedec,lpddr3.yaml.
 
   operating-points-v2: true
 
@@ -71,7 +73,7 @@ properties:
       - description: registers of DREX1
 
   samsung,syscon-clk:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: |
       Phandle of the clock register set used by the controller, these registers
       are used for enabling a 'pause' feature and are not exposed by clock
diff --git a/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
new file mode 100644
index 000000000000..e68c4306025a
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/snps,dw-umctl2-ddrc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare Universal Multi-Protocol Memory Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Manish Narani <manish.narani@xilinx.com>
+  - Michal Simek <michal.simek@xilinx.com>
+
+description: |
+  Synopsys DesignWare Enhanced uMCTL2 DDR Memory Controller is capable of
+  working with the memory devices supporting up to (LP)DDR4 protocol. It can
+  be equipped with SEC/DEC ECC feature if DRAM data bus width is either
+  16-bits or 32-bits or 64-bits wide.
+
+  For instance the ZynqMP DDR controller is based on the DW uMCTL2 v2.40a
+  controller. It has an optional SEC/DEC ECC support in 64- and 32-bits
+  bus width configurations.
+
+properties:
+  compatible:
+    oneOf:
+      - deprecated: true
+        description: Synopsys DW uMCTL2 DDR controller v3.80a
+        const: snps,ddrc-3.80a
+      - description: Synopsys DW uMCTL2 DDR controller
+        const: snps,dw-umctl2-ddrc
+      - description: Xilinx ZynqMP DDR controller v2.40a
+        const: xlnx,zynqmp-ddrc-2.40a
+
+  interrupts:
+    description:
+      DW uMCTL2 DDRC IP-core provides individual IRQ signal for each event":"
+      ECC Corrected Error, ECC Uncorrected Error, ECC Address Protection,
+      Scrubber-Done signal, DFI Parity/CRC Error. Some platforms may have the
+      signals merged before they reach the IRQ controller or have some of them
+      absent in case if the corresponding feature is unavailable/disabled.
+    minItems: 1
+    maxItems: 5
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 5
+    oneOf:
+      - description: Common ECC CE/UE/Scrubber/DFI Errors IRQ
+        items:
+          - const: ecc
+      - description: Individual ECC CE/UE/Scrubber/DFI Errors IRQs
+        items:
+          enum: [ ecc_ce, ecc_ue, ecc_ap, ecc_sbr, dfi_e ]
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      A standard set of the clock sources contains CSRs bus clock, AXI-ports
+      reference clock, DDRC core clock, Scrubber standalone clock
+      (synchronous to the DDRC clock).
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [ pclk, aclk, core, sbr ]
+
+  resets:
+    description:
+      Each clock domain can have separate reset signal.
+    minItems: 1
+    maxItems: 4
+
+  reset-names:
+    minItems: 1
+    maxItems: 4
+    items:
+      enum: [ prst, arst, core, sbr ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    memory-controller@fd070000 {
+      compatible = "xlnx,zynqmp-ddrc-2.40a";
+      reg = <0xfd070000 0x30000>;
+
+      interrupt-parent = <&gic>;
+      interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "ecc";
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    memory-controller@3d400000 {
+      compatible = "snps,dw-umctl2-ddrc";
+      reg = <0x3d400000 0x400000>;
+
+      interrupts = <147 IRQ_TYPE_LEVEL_HIGH>, <148 IRQ_TYPE_LEVEL_HIGH>,
+                   <149 IRQ_TYPE_LEVEL_HIGH>, <150 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "ecc_ce", "ecc_ue", "ecc_sbr", "dfi_e";
+
+      clocks = <&pclk>, <&aclk>, <&core_clk>, <&sbr_clk>;
+      clock-names = "pclk", "aclk", "core", "sbr";
+    };
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml
new file mode 100644
index 000000000000..475e4095068c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi-props.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Peripheral properties for ST FMC2 Controller
+
+maintainers:
+  - Christophe Kerello <christophe.kerello@foss.st.com>
+  - Marek Vasut <marex@denx.de>
+
+properties:
+  st,fmc2-ebi-cs-transaction-type:
+    description: |
+      Select one of the transactions type supported
+      0: Asynchronous mode 1 SRAM/FRAM.
+      1: Asynchronous mode 1 PSRAM.
+      2: Asynchronous mode A SRAM/FRAM.
+      3: Asynchronous mode A PSRAM.
+      4: Asynchronous mode 2 NOR.
+      5: Asynchronous mode B NOR.
+      6: Asynchronous mode C NOR.
+      7: Asynchronous mode D NOR.
+      8: Synchronous read synchronous write PSRAM.
+      9: Synchronous read asynchronous write PSRAM.
+      10: Synchronous read synchronous write NOR.
+      11: Synchronous read asynchronous write NOR.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 11
+
+  st,fmc2-ebi-cs-cclk-enable:
+    description: Continuous clock enable (first bank must be configured
+      in synchronous mode). The FMC_CLK is generated continuously
+      during asynchronous and synchronous access. By default, the
+      FMC_CLK is only generated during synchronous access.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-mux-enable:
+    description: Address/Data multiplexed on databus (valid only with
+      NOR and PSRAM transactions type). By default, Address/Data
+      are not multiplexed.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-buswidth:
+    description: Data bus width
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 8, 16 ]
+    default: 16
+
+  st,fmc2-ebi-cs-waitpol-high:
+    description: Wait signal polarity (NWAIT signal active high).
+      By default, NWAIT is active low.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-waitcfg-enable:
+    description: The NWAIT signal indicates wheither the data from the
+      device are valid or if a wait state must be inserted when accessing
+      the device in synchronous mode. By default, the NWAIT signal is
+      active one data cycle before wait state.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-wait-enable:
+    description: The NWAIT signal is enabled (its level is taken into
+      account after the programmed latency period to insert wait states
+      if asserted). By default, the NWAIT signal is disabled.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-asyncwait-enable:
+    description: The NWAIT signal is taken into account during asynchronous
+      transactions. By default, the NWAIT signal is not taken into account
+      during asynchronous transactions.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  st,fmc2-ebi-cs-cpsize:
+    description: CRAM page size. The controller splits the burst access
+      when the memory page is reached. By default, no burst split when
+      crossing page boundary.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 128, 256, 512, 1024 ]
+    default: 0
+
+  st,fmc2-ebi-cs-byte-lane-setup-ns:
+    description: This property configures the byte lane setup timing
+      defined in nanoseconds from NBLx low to Chip Select NEx low.
+
+  st,fmc2-ebi-cs-address-setup-ns:
+    description: This property defines the duration of the address setup
+      phase in nanoseconds used for asynchronous read/write transactions.
+
+  st,fmc2-ebi-cs-address-hold-ns:
+    description: This property defines the duration of the address hold
+      phase in nanoseconds used for asynchronous multiplexed read/write
+      transactions.
+
+  st,fmc2-ebi-cs-data-setup-ns:
+    description: This property defines the duration of the data setup phase
+      in nanoseconds used for asynchronous read/write transactions.
+
+  st,fmc2-ebi-cs-bus-turnaround-ns:
+    description: This property defines the delay in nanoseconds between the
+      end of current read/write transaction and the next transaction.
+
+  st,fmc2-ebi-cs-data-hold-ns:
+    description: This property defines the duration of the data hold phase
+      in nanoseconds used for asynchronous read/write transactions.
+
+  st,fmc2-ebi-cs-clk-period-ns:
+    description: This property defines the FMC_CLK output signal period in
+      nanoseconds.
+
+  st,fmc2-ebi-cs-data-latency-ns:
+    description: This property defines the data latency before reading or
+      writing the first data in nanoseconds.
+
+  st,fmc2-ebi-cs-write-address-setup-ns:
+    description: This property defines the duration of the address setup
+      phase in nanoseconds used for asynchronous write transactions.
+
+  st,fmc2-ebi-cs-write-address-hold-ns:
+    description: This property defines the duration of the address hold
+      phase in nanoseconds used for asynchronous multiplexed write
+      transactions.
+
+  st,fmc2-ebi-cs-write-data-setup-ns:
+    description: This property defines the duration of the data setup
+      phase in nanoseconds used for asynchronous write transactions.
+
+  st,fmc2-ebi-cs-write-bus-turnaround-ns:
+    description: This property defines the delay between the end of current
+      write transaction and the next transaction in nanoseconds.
+
+  st,fmc2-ebi-cs-write-data-hold-ns:
+    description: This property defines the duration of the data hold phase
+      in nanoseconds used for asynchronous write transactions.
+
+  st,fmc2-ebi-cs-max-low-pulse-ns:
+    description: This property defines the maximum chip select low pulse
+      duration in nanoseconds for synchronous transactions. When this timing
+      reaches 0, the controller splits the current access, toggles NE to
+      allow device refresh and restarts a new access.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
index cba74205846a..14f1833d37c9 100644
--- a/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/st,stm32-fmc2-ebi.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/memory-controllers/st,stm32-fmc2-ebi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
+title: STMicroelectronics Flexible Memory Controller 2 (FMC2)
 
 description: |
   The FMC2 functional block makes the interface with: synchronous and
@@ -19,7 +19,7 @@ description: |
   Select. The FMC2 performs only one access at a time to an external device.
 
 maintainers:
-  - Christophe Kerello <christophe.kerello@st.com>
+  - Christophe Kerello <christophe.kerello@foss.st.com>
 
 properties:
   compatible:
@@ -47,144 +47,9 @@ properties:
 
 patternProperties:
   "^.*@[0-4],[a-f0-9]+$":
+    additionalProperties: true
     type: object
-
-    properties:
-      reg:
-        description: Bank number, base address and size of the device.
-
-      st,fmc2-ebi-cs-transaction-type:
-        description: |
-          Select one of the transactions type supported
-          0: Asynchronous mode 1 SRAM/FRAM.
-          1: Asynchronous mode 1 PSRAM.
-          2: Asynchronous mode A SRAM/FRAM.
-          3: Asynchronous mode A PSRAM.
-          4: Asynchronous mode 2 NOR.
-          5: Asynchronous mode B NOR.
-          6: Asynchronous mode C NOR.
-          7: Asynchronous mode D NOR.
-          8: Synchronous read synchronous write PSRAM.
-          9: Synchronous read asynchronous write PSRAM.
-          10: Synchronous read synchronous write NOR.
-          11: Synchronous read asynchronous write NOR.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 0
-        maximum: 11
-
-      st,fmc2-ebi-cs-cclk-enable:
-        description: Continuous clock enable (first bank must be configured
-          in synchronous mode). The FMC_CLK is generated continuously
-          during asynchronous and synchronous access. By default, the
-          FMC_CLK is only generated during synchronous access.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-mux-enable:
-        description: Address/Data multiplexed on databus (valid only with
-          NOR and PSRAM transactions type). By default, Address/Data
-          are not multiplexed.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-buswidth:
-        description: Data bus width
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [ 8, 16 ]
-        default: 16
-
-      st,fmc2-ebi-cs-waitpol-high:
-        description: Wait signal polarity (NWAIT signal active high).
-          By default, NWAIT is active low.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-waitcfg-enable:
-        description: The NWAIT signal indicates wheither the data from the
-          device are valid or if a wait state must be inserted when accessing
-          the device in synchronous mode. By default, the NWAIT signal is
-          active one data cycle before wait state.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-wait-enable:
-        description: The NWAIT signal is enabled (its level is taken into
-          account after the programmed latency period to insert wait states
-          if asserted). By default, the NWAIT signal is disabled.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-asyncwait-enable:
-        description: The NWAIT signal is taken into account during asynchronous
-          transactions. By default, the NWAIT signal is not taken into account
-          during asynchronous transactions.
-        $ref: /schemas/types.yaml#/definitions/flag
-
-      st,fmc2-ebi-cs-cpsize:
-        description: CRAM page size. The controller splits the burst access
-          when the memory page is reached. By default, no burst split when
-          crossing page boundary.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [ 0, 128, 256, 512, 1024 ]
-        default: 0
-
-      st,fmc2-ebi-cs-byte-lane-setup-ns:
-        description: This property configures the byte lane setup timing
-          defined in nanoseconds from NBLx low to Chip Select NEx low.
-
-      st,fmc2-ebi-cs-address-setup-ns:
-        description: This property defines the duration of the address setup
-          phase in nanoseconds used for asynchronous read/write transactions.
-
-      st,fmc2-ebi-cs-address-hold-ns:
-        description: This property defines the duration of the address hold
-          phase in nanoseconds used for asynchronous multiplexed read/write
-          transactions.
-
-      st,fmc2-ebi-cs-data-setup-ns:
-        description: This property defines the duration of the data setup phase
-          in nanoseconds used for asynchronous read/write transactions.
-
-      st,fmc2-ebi-cs-bus-turnaround-ns:
-        description: This property defines the delay in nanoseconds between the
-          end of current read/write transaction and the next transaction.
-
-      st,fmc2-ebi-cs-data-hold-ns:
-        description: This property defines the duration of the data hold phase
-          in nanoseconds used for asynchronous read/write transactions.
-
-      st,fmc2-ebi-cs-clk-period-ns:
-        description: This property defines the FMC_CLK output signal period in
-          nanoseconds.
-
-      st,fmc2-ebi-cs-data-latency-ns:
-        description: This property defines the data latency before reading or
-          writing the first data in nanoseconds.
-
-      st,fmc2_ebi-cs-write-address-setup-ns:
-        description: This property defines the duration of the address setup
-          phase in nanoseconds used for asynchronous write transactions.
-
-      st,fmc2-ebi-cs-write-address-hold-ns:
-        description: This property defines the duration of the address hold
-          phase in nanoseconds used for asynchronous multiplexed write
-          transactions.
-
-      st,fmc2-ebi-cs-write-data-setup-ns:
-        description: This property defines the duration of the data setup
-          phase in nanoseconds used for asynchronous write transactions.
-
-      st,fmc2-ebi-cs-write-bus-turnaround-ns:
-        description: This property defines the delay between the end of current
-          write transaction and the next transaction in nanoseconds.
-
-      st,fmc2-ebi-cs-write-data-hold-ns:
-        description: This property defines the duration of the data hold phase
-          in nanoseconds used for asynchronous write transactions.
-
-      st,fmc2-ebi-cs-max-low-pulse-ns:
-        description: This property defines the maximum chip select low pulse
-          duration in nanoseconds for synchronous transactions. When this timing
-          reaches 0, the controller splits the current access, toggles NE to
-          allow device refresh and restarts a new access.
-
-    required:
-      - reg
+    $ref: mc-peripheral-props.yaml#
 
 required:
   - "#address-cells"
diff --git a/Documentation/devicetree/bindings/memory-controllers/synopsys,ddrc-ecc.yaml b/Documentation/devicetree/bindings/memory-controllers/synopsys,ddrc-ecc.yaml
deleted file mode 100644
index a24588474625..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/synopsys,ddrc-ecc.yaml
+++ /dev/null
@@ -1,73 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/memory-controllers/synopsys,ddrc-ecc.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Synopsys IntelliDDR Multi Protocol memory controller
-
-maintainers:
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
-  - Manish Narani <manish.narani@xilinx.com>
-  - Michal Simek <michal.simek@xilinx.com>
-
-description: |
-  The ZynqMP DDR ECC controller has an optional ECC support in 64-bit and
-  32-bit bus width configurations.
-
-  The Zynq DDR ECC controller has an optional ECC support in half-bus width
-  (16-bit) configuration.
-
-  These both ECC controllers correct single bit ECC errors and detect double bit
-  ECC errors.
-
-properties:
-  compatible:
-    enum:
-      - xlnx,zynq-ddrc-a05
-      - xlnx,zynqmp-ddrc-2.40a
-
-  interrupts:
-    maxItems: 1
-
-  reg:
-    maxItems: 1
-
-required:
-  - compatible
-  - reg
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            const: xlnx,zynqmp-ddrc-2.40a
-    then:
-      required:
-        - interrupts
-    else:
-      properties:
-        interrupts: false
-
-additionalProperties: false
-
-examples:
-  - |
-    memory-controller@f8006000 {
-        compatible = "xlnx,zynq-ddrc-a05";
-        reg = <0xf8006000 0x1000>;
-    };
-
-  - |
-    axi {
-        #address-cells = <2>;
-        #size-cells = <2>;
-
-        memory-controller@fd070000 {
-            compatible = "xlnx,zynqmp-ddrc-2.40a";
-            reg = <0x0 0xfd070000 0x0 0x30000>;
-            interrupt-parent = <&gic>;
-            interrupts = <0 112 4>;
-        };
-    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml
index 9ed51185ff99..382ddab60fbd 100644
--- a/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,da8xx-ddrctl.yaml
@@ -8,7 +8,7 @@ title: Texas Instruments da8xx DDR2/mDDR memory controller
 
 maintainers:
   - Bartosz Golaszewski <bgolaszewski@baylibre.com>
-  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
 
 description: |
   Documentation:
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml
new file mode 100644
index 000000000000..383d19e0ba26
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml
@@ -0,0 +1,252 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments GPMC Bus Child Nodes
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  This binding is meant for the child nodes of the GPMC node. The node
+  represents any device connected to the GPMC bus. It may be a Flash chip,
+  RAM chip or Ethernet controller, etc. These properties are meant for
+  configuring the GPMC settings/timings and will accompany the bindings
+  supported by the respective device.
+
+properties:
+  reg: true
+
+# GPMC Timing properties for child nodes. All are optional and default to 0.
+  gpmc,sync-clk-ps:
+    description: Minimum clock period for synchronous mode
+    default: 0
+
+# Chip-select signal timings corresponding to GPMC_CONFIG2:
+  gpmc,cs-on-ns:
+    description: Assertion time
+    default: 0
+
+  gpmc,cs-rd-off-ns:
+    description: Read deassertion time
+    default: 0
+
+  gpmc,cs-wr-off-ns:
+    description: Write deassertion time
+    default: 0
+
+# ADV signal timings corresponding to GPMC_CONFIG3:
+  gpmc,adv-on-ns:
+    description: Assertion time
+    default: 0
+
+  gpmc,adv-rd-off-ns:
+    description: Read deassertion time
+    default: 0
+
+  gpmc,adv-wr-off-ns:
+    description: Write deassertion time
+    default: 0
+
+  gpmc,adv-aad-mux-on-ns:
+    description: Assertion time for AAD
+    default: 0
+
+  gpmc,adv-aad-mux-rd-off-ns:
+    description: Read deassertion time for AAD
+    default: 0
+
+  gpmc,adv-aad-mux-wr-off-ns:
+    description: Write deassertion time for AAD
+    default: 0
+
+# WE signals timings corresponding to GPMC_CONFIG4:
+  gpmc,we-on-ns:
+    description: Assertion time
+    default: 0
+
+  gpmc,we-off-ns:
+    description: Deassertion time
+    default: 0
+
+# OE signals timings corresponding to GPMC_CONFIG4:
+  gpmc,oe-on-ns:
+    description: Assertion time
+    default: 0
+
+  gpmc,oe-off-ns:
+    description: Deassertion time
+    default: 0
+
+  gpmc,oe-aad-mux-on-ns:
+    description: Assertion time for AAD
+    default: 0
+
+  gpmc,oe-aad-mux-off-ns:
+    description: Deassertion time for AAD
+    default: 0
+
+# Access time and cycle time timings (in nanoseconds) corresponding to
+# GPMC_CONFIG5:
+  gpmc,page-burst-access-ns:
+    description: Multiple access word delay
+    default: 0
+
+  gpmc,access-ns:
+    description: Start-cycle to first data valid delay
+    default: 0
+
+  gpmc,rd-cycle-ns:
+    description: Total read cycle time
+    default: 0
+
+  gpmc,wr-cycle-ns:
+    description: Total write cycle time
+    default: 0
+
+  gpmc,bus-turnaround-ns:
+    description: Turn-around time between successive accesses
+    default: 0
+
+  gpmc,cycle2cycle-delay-ns:
+    description: Delay between chip-select pulses
+    default: 0
+
+  gpmc,clk-activation-ns:
+    description: GPMC clock activation time
+    default: 0
+
+  gpmc,wait-monitoring-ns:
+    description: Start of wait monitoring with regard to valid data
+    default: 0
+
+# Boolean timing parameters. If property is present, parameter is enabled
+# otherwise disabled.
+  gpmc,adv-extra-delay:
+    description: ADV signal is delayed by half GPMC clock
+    type: boolean
+
+  gpmc,cs-extra-delay:
+    description: CS signal is delayed by half GPMC clock
+    type: boolean
+
+  gpmc,cycle2cycle-diffcsen:
+    description: |
+      Add "cycle2cycle-delay" between successive accesses
+      to a different CS
+    type: boolean
+
+  gpmc,cycle2cycle-samecsen:
+    description: |
+      Add "cycle2cycle-delay" between successive accesses
+      to the same CS
+    type: boolean
+
+  gpmc,oe-extra-delay:
+    description: OE signal is delayed by half GPMC clock
+    type: boolean
+
+  gpmc,we-extra-delay:
+    description: WE signal is delayed by half GPMC clock
+    type: boolean
+
+  gpmc,time-para-granularity:
+    description: Multiply all access times by 2
+    type: boolean
+
+# The following two properties are applicable only to OMAP3+ and AM335x:
+  gpmc,wr-access-ns:
+    description: |
+      In synchronous write mode, for single or
+      burst accesses, defines the number of
+      GPMC_FCLK cycles from start access time
+      to the GPMC_CLK rising edge used by the
+      memory device for the first data capture.
+    default: 0
+
+  gpmc,wr-data-mux-bus-ns:
+    description: |
+      In address-data multiplex mode, specifies
+      the time when the first data is driven on
+      the address-data bus.
+    default: 0
+
+# GPMC chip-select settings properties for child nodes. All are optional.
+  gpmc,burst-length:
+    description: Page/burst length.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 4, 8, 16]
+    default: 0
+
+  gpmc,burst-wrap:
+    description: Enables wrap bursting
+    type: boolean
+
+  gpmc,burst-read:
+    description: Enables read page/burst mode
+    type: boolean
+
+  gpmc,burst-write:
+    description: Enables write page/burst mode
+    type: boolean
+
+  gpmc,device-width:
+    description: |
+      Total width of device(s) connected to a GPMC
+      chip-select in bytes. The GPMC supports 8-bit
+      and 16-bit devices and so this property must be
+      1 or 2.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+    default: 1
+
+  gpmc,mux-add-data:
+    description: |
+      Address and data multiplexing configuration.
+      Valid values are
+      0 for Non multiplexed mode
+      1 for address-address-data multiplexing mode and
+      2 for address-data multiplexing mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  gpmc,sync-read:
+    description: |
+      Enables synchronous read. Defaults to asynchronous
+      is this is not set.
+    type: boolean
+
+  gpmc,sync-write:
+    description: |
+      Enables synchronous writes. Defaults to asynchronous
+      is this is not set.
+    type: boolean
+
+  gpmc,wait-pin:
+    description: |
+      Wait-pin used by client. Must be less than "gpmc,num-waitpins".
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,wait-pin-polarity:
+    description: |
+      Set the desired polarity for the selected wait pin.
+      0 for active low, 1 for active high.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  gpmc,wait-on-read:
+    description: Enables wait monitoring on reads.
+    type: boolean
+
+  gpmc,wait-on-write:
+    description: Enables wait monitoring on writes.
+    type: boolean
+
+required:
+  - reg
+
+# the GPMC child will have its own native properties
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
new file mode 100644
index 000000000000..bc9406929f6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments GPMC Memory Controller
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  The GPMC is a unified memory controller dedicated for interfacing
+  with external memory devices like
+  - Asynchronous SRAM-like memories and ASICs
+  - Asynchronous, synchronous, and page mode burst NOR flash
+  - NAND flash
+  - Pseudo-SRAM devices
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,am3352-gpmc
+          - ti,am64-gpmc
+          - ti,omap2420-gpmc
+          - ti,omap2430-gpmc
+          - ti,omap3430-gpmc
+          - ti,omap4430-gpmc
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: cfg
+      - const: data
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: |
+      Functional clock. Used for bus timing calculations and
+      GPMC configuration.
+
+  clock-names:
+    items:
+      - const: fck
+
+  power-domains:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: DMA channel for GPMC NAND prefetch
+
+  dma-names:
+    items:
+      - const: rxtx
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  gpmc,num-cs:
+    description: maximum number of supported chip-select lines.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  gpmc,num-waitpins:
+    description: maximum number of supported wait pins.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ranges:
+    minItems: 1
+    description: |
+      Must be set up to reflect the memory layout with four
+      integer values for each chip-select line in use,
+      <cs-number> 0 <physical address of mapping> <size>
+    items:
+      - description: NAND bank 0
+      - description: NOR/SRAM bank 0
+      - description: NOR/SRAM bank 1
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller:
+    description: |
+      The GPMC driver implements an interrupt controller for
+      the NAND events "fifoevent" and "termcount" plus the
+      rising/falling edges on the GPMC_WAIT pins.
+      The interrupt number mapping is as follows
+      0 - NAND_fifoevent
+      1 - NAND_termcount
+      2 - GPMC_WAIT0 pin edge
+      3 - GPMC_WAIT1 pin edge, and so on.
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-controller:
+    description: |
+      The GPMC driver implements a GPIO controller for the
+      GPMC WAIT pins that can be used as general purpose inputs.
+      0 maps to GPMC_WAIT0 pin.
+
+  ti,hwmods:
+    description:
+      Name of the HWMOD associated with GPMC. This is for legacy
+      omap2/3 platforms only.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+  ti,no-idle-on-init:
+    description:
+      Prevent idling the module at init. This is for legacy omap2/3
+      platforms only.
+    type: boolean
+    deprecated: true
+
+patternProperties:
+  "@[0-7],[a-f0-9]+$":
+    type: object
+    description: |
+      The child device node represents the device connected to the GPMC
+      bus. The device can be a NAND chip, SRAM device, NOR device
+      or an ASIC.
+    $ref: "ti,gpmc-child.yaml"
+
+
+required:
+  - compatible
+  - reg
+  - gpmc,num-cs
+  - gpmc,num-waitpins
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am64-gpmc
+    then:
+      required:
+        - reg-names
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpmc: memory-controller@50000000 {
+      compatible = "ti,am3352-gpmc";
+      reg = <0x50000000 0x2000>;
+      interrupts = <100>;
+      clocks = <&l3s_clkctrl>;
+      clock-names = "fck";
+      dmas = <&edma 52 0>;
+      dma-names = "rxtx";
+      gpmc,num-cs = <8>;
+      gpmc,num-waitpins = <2>;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      gpio-controller;
+      #gpio-cells = <2>;
+
+      nand@0,0 {
+        compatible = "ti,omap2-nand";
+        reg = <0 0 4>;
+        interrupt-parent = <&gpmc>;
+        interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+                     <1 IRQ_TYPE_NONE>; /* termcount */
+        ti,nand-xfer-type = "prefetch-dma";
+        ti,nand-ecc-opt = "bch16";
+        ti,elm-id = <&elm>;
+        rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+      };
+    };
diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
new file mode 100644
index 000000000000..8f72e2f8588a
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/xlnx,zynq-ddrc-a05.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Zynq A05 DDR Memory Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Manish Narani <manish.narani@xilinx.com>
+  - Michal Simek <michal.simek@xilinx.com>
+
+description:
+  The Zynq DDR ECC controller has an optional ECC support in half-bus width
+  (16-bit) configuration. It is cappable of correcting single bit ECC errors
+  and detecting double bit ECC errors.
+
+properties:
+  compatible:
+    const: xlnx,zynq-ddrc-a05
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    memory-controller@f8006000 {
+      compatible = "xlnx,zynq-ddrc-a05";
+      reg = <0xf8006000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml
new file mode 100644
index 000000000000..ca9fc747bf4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/xlnx,zynqmp-ocmc-1.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynqmp OCM(On-Chip Memory) Controller
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+  - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
+
+description: |
+  The OCM supports 64-bit wide ECC functionality to detect multi-bit errors
+  and recover from a single-bit memory fault.On a write, if all bytes are
+  being written, the ECC is generated and written into the ECC RAM along with
+  the write-data that is written into the data RAM. If one or more bytes are
+  not written, then the read operation results in an correctable error or
+  uncorrectable error.
+
+properties:
+  compatible:
+    const: xlnx,zynqmp-ocmc-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    memory-controller@ff960000 {
+      compatible = "xlnx,zynqmp-ocmc-1.0";
+      reg = <0xff960000 0x1000>;
+      interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
deleted file mode 100644
index 937b3e5505e0..000000000000
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ /dev/null
@@ -1,282 +0,0 @@
-* AB8500 Multi-Functional Device (MFD)
-
-Required parent device properties:
-- compatible             : contains "stericsson,ab8500" or "stericsson,ab8505";
-- interrupts             : contains the IRQ line for the AB8500
-- interrupt-controller   : describes the AB8500 as an Interrupt Controller (has its own domain)
-- #interrupt-cells       : should be 2, for 2-cell format
-                            - The first cell is the AB8500 local IRQ number
-                            - The second cell is used to specify optional parameters
-                              - bits[3:0] trigger type and level flags:
-                                  1 = low-to-high edge triggered
-                                  2 = high-to-low edge triggered
-                                  4 = active high level-sensitive
-                                  8 = active low level-sensitive
-
-The AB8500 consists of a large and varied group of sub-devices:
-
-Device                     IRQ Names              Supply Names   Description
-------                     ---------              ------------   -----------
-ab8500-bm                :                      :              : Battery Manager
-ab8500-btemp             :                      :              : Battery Temperature
-ab8500-charger           :                      :              : Battery Charger
-ab8500-codec             :                      :              : Audio Codec
-ab8500-fg                : 			: vddadc       : Fuel Gauge
-			 : NCONV_ACCU           :	       : Accumulate N Sample Conversion
-			 : BATT_OVV		:	       : Battery Over Voltage
-			 : LOW_BAT_F		:	       : LOW threshold battery voltage
-			 : CC_INT_CALIB		:	       : Coulomb Counter Internal Calibration
-			 : CCEOC		:	       : Coulomb Counter End of Conversion
-ab8500-btemp		 :			: vtvout       : Battery Temperature
-			 : BAT_CTRL_INDB        :              : Battery Removal Indicator
-			 : BTEMP_LOW            :              : Btemp < BtempLow, if battery temperature is lower than -10°C
-			 : BTEMP_LOW_MEDIUM     :              : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
-			 : BTEMP_MEDIUM_HIGH    :	       : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and MaxTemp
-			 : BTEMP_HIGH           :              : Btemp > BtempHigh, if battery temperature is higher than MaxTemp
-ab8500-charger		 :			: vddadc       : Charger interface
-			 : MAIN_CH_UNPLUG_DET	:	       : main charger unplug detection management (not in 8505)
-			 : MAIN_CHARGE_PLUG_DET	:	       : main charger plug detection management (not in 8505)
-			 : MAIN_EXT_CH_NOT_OK	:	       : main charger not OK
-			 : MAIN_CH_TH_PROT_R	:	       : Die temp is above main charger
-			 : MAIN_CH_TH_PROT_F	:	       : Die temp is below main charger
-			 : VBUS_DET_F		:	       : VBUS falling detected
-			 : VBUS_DET_R		:	       : VBUS rising detected
-			 : USB_LINK_STATUS	:	       : USB link status has changed
-			 : USB_CH_TH_PROT_R	:	       : Die temp is above usb charger
-			 : USB_CH_TH_PROT_F	:	       : Die temp is below usb charger
-			 : USB_CHARGER_NOT_OKR	:	       : allowed USB charger not ok detection
-			 : VBUS_OVV		:	       : Overvoltage on Vbus ball detected (USB charge is stopped)
-			 : CH_WD_EXP		:	       : Charger watchdog detected
-ab8500-gpadc             : HW_CONV_END          : vddadc       : Analogue to Digital Converter
-                           SW_CONV_END          :              :
-ab8500-gpio              :                      :              : GPIO Controller (AB8500)
-ab8505-gpio              :                      :              : GPIO Controller (AB8505)
-ab8500-ponkey            : ONKEY_DBF            :              : Power-on Key
-                           ONKEY_DBR            :              :
-ab8500-pwm               :                      :              : Pulse Width Modulator
-ab8500-regulator         :                      :              : Regulators (AB8500)
-ab8505-regulator         :                      :              : Regulators (AB8505)
-ab8500-rtc               : 60S                  :              : Real Time Clock
-                         : ALARM                :              :
-ab8500-sysctrl           :                      :              : System Control
-ab8500-usb               : ID_WAKEUP_R          : vddulpivio18 : Universal Serial Bus
-                         : ID_WAKEUP_F          : v-ape        :
-                         : VBUS_DET_F           : musb_1v8     :
-                         : VBUS_DET_R           :              :
-                         : USB_LINK_STATUS      :              :
-                         : USB_ADP_PROBE_PLUG   :              :
-                         : USB_ADP_PROBE_UNPLUG :              :
-
-Required child device properties:
-- compatible             : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey|
-                                               pwm|regulator|rtc|sysctrl|usb]";
-
-  A few child devices require ADC channels from the GPADC node. Those follow the
-  standard bindings from
-  https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml
-  and Documentation/devicetree/bindings/iio/adc/adc.yaml
-
-  abx500-temp		 : io-channels "aux1" and "aux2" for measuring external
-			   temperatures.
-  ab8500-fg		 : io-channel "main_bat_v" for measuring main battery voltage,
-  ab8500-btemp		 : io-channels "btemp_ball" and "bat_ctrl" for measuring the
-			   battery voltage.
-  ab8500-charger	 : io-channels "main_charger_v", "main_charger_c", "vbus_v",
-			   "usb_charger_c" for measuring voltage and current of the
-			   different charging supplies.
-
-Optional child device properties:
-- interrupts             : contains the device IRQ(s) using the 2-cell format (see above)
-- interrupt-names        : contains names of IRQ resource in the order in which they were
-                           supplied in the interrupts property
-- <supply_name>-supply   : contains a phandle to the regulator supply node in Device Tree
-
-Non-standard child device properties:
- - Audio CODEC:
-   - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential)
-   - stericsson,amic1a-bias-vamic2          : Analoge Mic wishes to use a non-standard Vamic
-   - stericsson,amic1b-bias-vamic2          : Analoge Mic wishes to use a non-standard Vamic
-   - stericsson,amic2-bias-vamic1           : Analoge Mic wishes to use a non-standard Vamic
-   - stericsson,earpeice-cmv                : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
-
-ab8500 {
-         compatible = "stericsson,ab8500";
-         interrupts = <0 40 0x4>;
-         interrupt-controller;
-         #interrupt-cells = <2>;
-
-         ab8500-rtc {
-                 compatible = "stericsson,ab8500-rtc";
-                 interrupts = <17 0x4
-                               18 0x4>;
-                 interrupt-names = "60S", "ALARM";
-         };
-
-        ab8500-gpadc {
-                compatible = "stericsson,ab8500-gpadc";
-                interrupts = <32 0x4
-                              39 0x4>;
-                interrupt-names = "HW_CONV_END", "SW_CONV_END";
-                vddadc-supply = <&ab8500_ldo_tvout_reg>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#io-channel-cells = <1>;
-
-		/* GPADC channels */
-		bat_ctrl: channel@1 {
-			reg = <0x01>;
-		};
-		btemp_ball: channel@2 {
-			reg = <0x02>;
-		};
-		main_charger_v: channel@3 {
-			reg = <0x03>;
-		};
-		acc_detect1: channel@4 {
-			reg = <0x04>;
-		};
-		acc_detect2: channel@5 {
-			reg = <0x05>;
-		};
-		adc_aux1: channel@6 {
-			reg = <0x06>;
-		};
-		adc_aux2: channel@7 {
-			reg = <0x07>;
-		};
-		main_batt_v: channel@8 {
-			reg = <0x08>;
-		};
-		vbus_v: channel@9 {
-			reg = <0x09>;
-		};
-		main_charger_c: channel@a {
-			reg = <0x0a>;
-		};
-		usb_charger_c: channel@b {
-			reg = <0x0b>;
-		};
-		bk_bat_v: channel@c {
-			reg = <0x0c>;
-		};
-		die_temp: channel@d {
-			reg = <0x0d>;
-		};
-		usb_id: channel@e {
-			reg = <0x0e>;
-		};
-		xtal_temp: channel@12 {
-			reg = <0x12>;
-		};
-		vbat_true_meas: channel@13 {
-			reg = <0x13>;
-		};
-		bat_ctrl_and_ibat: channel@1c {
-			reg = <0x1c>;
-		};
-		vbat_meas_and_ibat: channel@1d {
-			reg = <0x1d>;
-		};
-		vbat_true_meas_and_ibat: channel@1e {
-			reg = <0x1e>;
-		};
-		bat_temp_and_ibat: channel@1f {
-			reg = <0x1f>;
-		};
-        };
-
-	ab8500_temp {
-		compatible = "stericsson,abx500-temp";
-		io-channels = <&gpadc 0x06>,
-			      <&gpadc 0x07>;
-		io-channel-name = "aux1", "aux2";
-	};
-
-	ab8500_battery: ab8500_battery {
-		stericsson,battery-type = "LIPO";
-		thermistor-on-batctrl;
-	};
-
-	ab8500_fg {
-		compatible = "stericsson,ab8500-fg";
-		battery	   = <&ab8500_battery>;
-		io-channels = <&gpadc 0x08>;
-		io-channel-name = "main_bat_v";
-	};
-
-	ab8500_btemp {
-		compatible = "stericsson,ab8500-btemp";
-		battery	   = <&ab8500_battery>;
-		io-channels = <&gpadc 0x02>,
-			      <&gpadc 0x01>;
-		io-channel-name = "btemp_ball",
-				"bat_ctrl";
-	};
-
-	ab8500_charger {
-		compatible	= "stericsson,ab8500-charger";
-		battery		= <&ab8500_battery>;
-		vddadc-supply	= <&ab8500_ldo_tvout_reg>;
-		io-channels = <&gpadc 0x03>,
-			      <&gpadc 0x0a>,
-			      <&gpadc 0x09>,
-			      <&gpadc 0x0b>;
-		io-channel-name = "main_charger_v",
-				"main_charger_c",
-				"vbus_v",
-				"usb_charger_c";
-	};
-
-        ab8500-usb {
-                compatible = "stericsson,ab8500-usb";
-                interrupts = < 90 0x4
-                               96 0x4
-                               14 0x4
-                               15 0x4
-                               79 0x4
-                               74 0x4
-                               75 0x4>;
-                interrupt-names = "ID_WAKEUP_R",
-                                  "ID_WAKEUP_F",
-                                  "VBUS_DET_F",
-                                  "VBUS_DET_R",
-                                  "USB_LINK_STATUS",
-                                  "USB_ADP_PROBE_PLUG",
-                                  "USB_ADP_PROBE_UNPLUG";
-                vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
-                v-ape-supply = <&db8500_vape_reg>;
-                musb_1v8-supply = <&db8500_vsmps2_reg>;
-        };
-
-        ab8500-ponkey {
-                compatible = "stericsson,ab8500-ponkey";
-                interrupts = <6 0x4
-                              7 0x4>;
-                interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
-        };
-
-        ab8500-sysctrl {
-                compatible = "stericsson,ab8500-sysctrl";
-        };
-
-        ab8500-pwm {
-                compatible = "stericsson,ab8500-pwm";
-        };
-
-	codec: ab8500-codec {
-		compatible = "stericsson,ab8500-codec";
-
-		stericsson,earpeice-cmv = <950>; /* Units in mV. */
-	};
-
-        ab8500-regulators {
-                compatible = "stericsson,ab8500-regulator";
-
-                ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
-                        /*
-                         * See: Documentation/devicetree/bindings/regulator/regulator.txt
-                         * for more information on regulators
-                         */
-                };
-        };
-};
diff --git a/Documentation/devicetree/bindings/mfd/ac100.txt b/Documentation/devicetree/bindings/mfd/ac100.txt
deleted file mode 100644
index dff219f07493..000000000000
--- a/Documentation/devicetree/bindings/mfd/ac100.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-X-Powers AC100 Codec/RTC IC Device Tree bindings
-
-AC100 is a audio codec and RTC subsystem combo IC. The 2 parts are
-separated, including power supplies and interrupt lines, but share
-a common register address space and host interface.
-
-Required properties:
-- compatible: "x-powers,ac100"
-- reg: The I2C slave address or RSB hardware address for the chip
-- sub-nodes:
-  - codec
-    - compatible:		"x-powers,ac100-codec"
-    - interrupts:		SoC NMI / GPIO interrupt connected to the
-    				IRQ_AUDIO pin
-    - #clock-cells:		Shall be 0
-    - clock-output-names:	"4M_adda"
-
-    - see clock/clock-bindings.txt for common clock bindings
-
-  - rtc
-    - compatible:		"x-powers,ac100-rtc"
-    - clocks:			A phandle to the codec's "4M_adda" clock
-    - #clock-cells:		Shall be 1
-    - clock-output-names:	"cko1_rtc", "cko2_rtc", "cko3_rtc"
-
-    - see clock/clock-bindings.txt for common clock bindings
-
-Example:
-
-ac100: codec@e89 {
-	compatible = "x-powers,ac100";
-	reg = <0xe89>;
-
-	ac100_codec: codec {
-		compatible = "x-powers,ac100-codec";
-		interrupt-parent = <&r_pio>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
-		#clock-cells = <0>;
-		clock-output-names = "4M_adda";
-	};
-
-	ac100_rtc: rtc {
-		compatible = "x-powers,ac100-rtc";
-		interrupt-parent = <&nmi_intc>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&ac100_codec>;
-		#clock-cells = <1>;
-		clock-output-names = "cko1_rtc", "cko2_rtc", "cko3_rtc";
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
index dd43a0c766f3..6811246c5771 100644
--- a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
+++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Actions Semi ATC260x Power Management IC bindings
+title: Actions Semi ATC260x Power Management IC
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
@@ -129,7 +129,7 @@ required:
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
index f591332fc462..93f5065a6280 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/allwinner,sun4i-a10-ts.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Resistive Touchscreen Controller Device Tree Bindings
+title: Allwinner A10 Resistive Touchscreen Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
index d131759ccaf3..cf94176fe1eb 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun6i-a31-prcm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/allwinner,sun6i-a31-prcm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A31 PRCM Device Tree Bindings
+title: Allwinner A31 PRCM
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -22,6 +22,7 @@ properties:
 patternProperties:
   "^.*_(clk|rst)$":
     type: object
+    unevaluatedProperties: false
 
     properties:
       compatible:
@@ -38,6 +39,45 @@ patternProperties:
           properties:
             compatible:
               contains:
+                const: fixed-factor-clock
+
+        then:
+          $ref: /schemas/clock/fixed-factor-clock.yaml#
+
+      - if:
+          properties:
+            compatible:
+              contains:
+                const: allwinner,sun4i-a10-mod0-clk
+
+        then:
+          properties:
+            "#clock-cells":
+              const: 0
+
+            # Already checked in the main schema
+            compatible: true
+
+            clocks:
+              maxItems: 2
+
+            clock-output-names:
+              maxItems: 1
+
+            phandle: true
+
+          required:
+            - "#clock-cells"
+            - compatible
+            - clocks
+            - clock-output-names
+
+          additionalProperties: false
+
+      - if:
+          properties:
+            compatible:
+              contains:
                 const: allwinner,sun6i-a31-apb0-clk
 
         then:
diff --git a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
index aa5e683b236c..16c80a7eec49 100644
--- a/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
+++ b/Documentation/devicetree/bindings/mfd/allwinner,sun8i-a23-prcm.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/allwinner,sun8i-a23-prcm.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A23 PRCM Device Tree Bindings
+title: Allwinner A23 PRCM
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -22,6 +22,7 @@ properties:
 patternProperties:
   "^.*(clk|rst|codec).*$":
     type: object
+    unevaluatedProperties: false
 
     properties:
       compatible:
@@ -40,6 +41,15 @@ patternProperties:
           properties:
             compatible:
               contains:
+                const: fixed-factor-clock
+
+        then:
+          $ref: /schemas/clock/fixed-factor-clock.yaml#
+
+      - if:
+          properties:
+            compatible:
+              contains:
                 const: allwinner,sun8i-a23-apb0-clk
 
         then:
diff --git a/Documentation/devicetree/bindings/mfd/ampere,smpro.yaml b/Documentation/devicetree/bindings/mfd/ampere,smpro.yaml
new file mode 100644
index 000000000000..c442c3cdffed
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ampere,smpro.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ampere,smpro.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ampere Altra SMPro firmware driver
+
+maintainers:
+  - Quan Nguyen <quan@os.amperecomputing.com>
+
+description: |
+  Ampere Altra SMPro firmware may contain different blocks like hardware
+  monitoring, error monitoring and other miscellaneous features.
+
+properties:
+  compatible:
+    enum:
+      - ampere,smpro
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        smpro@4f {
+            compatible = "ampere,smpro";
+            reg = <0x4f>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
new file mode 100644
index 000000000000..1689b986f441
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed System Control Unit
+
+description:
+  The Aspeed System Control Unit manages the global behaviour of the SoC,
+  configuring elements such as clocks, pinmux, and reset.
+
+maintainers:
+  - Joel Stanley <joel@jms.id.au>
+  - Andrew Jeffery <andrew@aj.id.au>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2400-scu
+          - aspeed,ast2500-scu
+          - aspeed,ast2600-scu
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+patternProperties:
+  '^p2a-control@[0-9a-f]+$':
+    description: See Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
+    type: object
+
+  '^pinctrl(@[0-9a-f]+)?$':
+    oneOf:
+      - $ref: /schemas/pinctrl/aspeed,ast2400-pinctrl.yaml
+      - $ref: /schemas/pinctrl/aspeed,ast2500-pinctrl.yaml
+      - $ref: /schemas/pinctrl/aspeed,ast2600-pinctrl.yaml
+
+  '^interrupt-controller@[0-9a-f]+$':
+    description: See Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt
+    type: object
+
+  '^silicon-id@[0-9a-f]+$':
+    description: Unique hardware silicon identifiers within the SoC
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-silicon-id
+              - aspeed,ast2500-silicon-id
+              - aspeed,ast2600-silicon-id
+          - const: aspeed,silicon-id
+
+      reg:
+        description:
+          The reg should be the unique silicon id register, and not backwards
+          compatible one in eg. the 2600.
+        minItems: 1
+        items:
+          - description: silicon id information registers
+          - description: unique chip id registers
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+  - '#clock-cells'
+  - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1e6e2000 {
+        compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+        reg = <0x1e6e2000 0x1a8>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
+
+        silicon-id@7c {
+            compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
+            reg = <0x7c 0x4>, <0x150 0x8>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
deleted file mode 100644
index 936aa108eab4..000000000000
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
+++ /dev/null
@@ -1,157 +0,0 @@
-======================================================================
-Device tree bindings for the Aspeed Low Pin Count (LPC) Bus Controller
-======================================================================
-
-The LPC bus is a means to bridge a host CPU to a number of low-bandwidth
-peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The
-primary use case of the Aspeed LPC controller is as a slave on the bus
-(typically in a Baseboard Management Controller SoC), but under certain
-conditions it can also take the role of bus master.
-
-The LPC controller is represented as a multi-function device to account for the
-mix of functionality, which includes, but is not limited to:
-
-* An IPMI Block Transfer[2] Controller
-
-* An LPC Host Controller: Manages LPC functions such as host vs slave mode, the
-  physical properties of some LPC pins, configuration of serial IRQs, and
-  APB-to-LPC bridging amonst other functions.
-
-* An LPC Host Interface Controller: Manages functions exposed to the host such
-  as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
-  management and bus snoop configuration.
-
-* A set of SuperIO[3] scratch registers: Enables implementation of e.g. custom
-  hardware management protocols for handover between the host and baseboard
-  management controller.
-
-Additionally the state of the LPC controller influences the pinmux
-configuration, therefore the host portion of the controller is exposed as a
-syscon as a means to arbitrate access.
-
-[0] http://www.intel.com/design/chipsets/industry/25128901.pdf
-[1] https://www.renesas.com/en-sg/doc/products/mpumcu/001/rej09b0078_h8s2168.pdf?key=7c88837454702128622bee53acbda8f4
-[2] https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmi-second-gen-interface-spec-v2-rev1-1.pdf
-[3] https://en.wikipedia.org/wiki/Super_I/O
-
-Required properties
-===================
-
-- compatible:	One of:
-		"aspeed,ast2400-lpc-v2", "simple-mfd", "syscon"
-		"aspeed,ast2500-lpc-v2", "simple-mfd", "syscon"
-		"aspeed,ast2600-lpc-v2", "simple-mfd", "syscon"
-
-- reg:		contains the physical address and length values of the Aspeed
-                LPC memory region.
-
-- #address-cells: <1>
-- #size-cells:	<1>
-- ranges:	Maps 0 to the physical address and length of the LPC memory
-                region
-
-Example:
-
-lpc: lpc@1e789000 {
-	compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
-	reg = <0x1e789000 0x1000>;
-
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0x0 0x1e789000 0x1000>;
-
-	lpc_snoop: lpc-snoop@0 {
-		compatible = "aspeed,ast2600-lpc-snoop";
-		reg = <0x0 0x80>;
-		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
-		snoop-ports = <0x80>;
-	};
-};
-
-
-LPC Host Interface Controller
--------------------
-
-The LPC Host Interface Controller manages functions exposed to the host such as
-LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
-management and bus snoop configuration.
-
-Required properties:
-
-- compatible:	One of:
-		"aspeed,ast2400-lpc-ctrl";
-		"aspeed,ast2500-lpc-ctrl";
-		"aspeed,ast2600-lpc-ctrl";
-
-- reg:		contains offset/length values of the host interface controller
-		memory regions
-
-- clocks:	contains a phandle to the syscon node describing the clocks.
-		There should then be one cell representing the clock to use
-
-Optional properties:
-
-- memory-region: A phandle to a reserved_memory region to be used for the LPC
-		to AHB mapping
-
-- flash:	A phandle to the SPI flash controller containing the flash to
-		be exposed over the LPC to AHB mapping
-
-Example:
-
-lpc_ctrl: lpc-ctrl@80 {
-	compatible = "aspeed,ast2500-lpc-ctrl";
-	reg = <0x80 0x80>;
-	clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
-	memory-region = <&flash_memory>;
-	flash = <&spi>;
-};
-
-LPC Host Controller
--------------------
-
-The Aspeed LPC Host Controller configures the Low Pin Count (LPC) bus behaviour
-between the host and the baseboard management controller. The registers exist
-in the "host" portion of the Aspeed LPC controller, which must be the parent of
-the LPC host controller node.
-
-Required properties:
-
-- compatible:	One of:
-		"aspeed,ast2400-lhc";
-		"aspeed,ast2500-lhc";
-		"aspeed,ast2600-lhc";
-
-- reg:		contains offset/length values of the LHC memory regions. In the
-		AST2400 and AST2500 there are two regions.
-
-Example:
-
-lhc: lhc@a0 {
-	compatible = "aspeed,ast2500-lhc";
-	reg = <0xa0 0x24 0xc8 0x8>;
-};
-
-LPC reset control
------------------
-
-The UARTs present in the ASPEED SoC can have their resets tied to the reset
-state of the LPC bus. Some systems may chose to modify this configuration.
-
-Required properties:
-
- - compatible:		One of:
-			"aspeed,ast2600-lpc-reset";
-			"aspeed,ast2500-lpc-reset";
-			"aspeed,ast2400-lpc-reset";
-
- - reg:			offset and length of the IP in the LHC memory region
- - #reset-controller	indicates the number of reset cells expected
-
-Example:
-
-lpc_reset: reset-controller@98 {
-        compatible = "aspeed,ast2500-lpc-reset";
-        reg = <0x98 0x4>;
-        #reset-cells = <1>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
new file mode 100644
index 000000000000..750996d9a175
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# # Copyright (c) 2021 Aspeed Tehchnology Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed Low Pin Count (LPC) Bus Controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+  - Chia-Wei Wang <chiawei_wang@aspeedtech.com>
+
+description:
+  The LPC bus is a means to bridge a host CPU to a number of low-bandwidth
+  peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The
+  primary use case of the Aspeed LPC controller is as a slave on the bus
+  (typically in a Baseboard Management Controller SoC), but under certain
+  conditions it can also take the role of bus master.
+
+  The LPC controller is represented as a multi-function device to account for the
+  mix of functionality, which includes, but is not limited to
+
+  * An IPMI Block Transfer[2] Controller
+
+  * An LPC Host Interface Controller manages functions exposed to the host such
+    as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
+    management and bus snoop configuration.
+
+  * A set of SuperIO[3] scratch registers enableing implementation of e.g. custom
+    hardware management protocols for handover between the host and baseboard
+    management controller.
+
+  Additionally the state of the LPC controller influences the pinmux
+  configuration, therefore the host portion of the controller is exposed as a
+  syscon as a means to arbitrate access.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - aspeed,ast2400-lpc-v2
+          - aspeed,ast2500-lpc-v2
+          - aspeed,ast2600-lpc-v2
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^lpc-ctrl@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    description: |
+      The LPC Host Interface Controller manages functions exposed to the host such as
+      LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART management
+      and bus snoop configuration.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-lpc-ctrl
+              - aspeed,ast2500-lpc-ctrl
+              - aspeed,ast2600-lpc-ctrl
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      memory-region:
+        maxItems: 1
+        description: handle to memory reservation for the LPC to AHB mapping region
+
+      flash:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: The SPI flash controller containing the flash to be exposed over the LPC to AHB mapping
+
+    required:
+      - compatible
+      - clocks
+
+  "^reset-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    description:
+      The UARTs present in the ASPEED SoC can have their resets tied to the reset
+      state of the LPC bus. Some systems may chose to modify this configuration
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-lpc-reset
+              - aspeed,ast2500-lpc-reset
+              - aspeed,ast2600-lpc-reset
+
+      reg:
+        maxItems: 1
+
+      '#reset-cells':
+        const: 1
+
+    required:
+      - compatible
+      - '#reset-cells'
+
+  "^lpc-snoop@[0-9a-f]+$":
+    type: object
+    additionalProperties: false
+
+    description:
+      The LPC snoop interface allows the BMC to listen on and record the data
+      bytes written by the Host to the targeted LPC I/O pots.
+
+    properties:
+      compatible:
+        items:
+          - enum:
+              - aspeed,ast2400-lpc-snoop
+              - aspeed,ast2500-lpc-snoop
+              - aspeed,ast2600-lpc-snoop
+
+      reg:
+        maxItems: 1
+
+      interrupts:
+        maxItems: 1
+
+      snoop-ports:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description: The LPC I/O ports to snoop
+
+    required:
+      - compatible
+      - interrupts
+      - snoop-ports
+
+  "^uart-routing@[0-9a-f]+$":
+    $ref: /schemas/soc/aspeed/uart-routing.yaml#
+    description: The UART routing control under LPC register space
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+
+    lpc: lpc@1e789000 {
+        compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
+        reg = <0x1e789000 0x1000>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e789000 0x1000>;
+
+        lpc_ctrl: lpc-ctrl@80 {
+            compatible = "aspeed,ast2600-lpc-ctrl";
+            reg = <0x80 0x80>;
+            clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+            memory-region = <&flash_memory>;
+            flash = <&spi>;
+        };
+
+        lpc_reset: reset-controller@98 {
+            compatible = "aspeed,ast2600-lpc-reset";
+            reg = <0x98 0x4>;
+            #reset-cells = <1>;
+        };
+
+        lpc_snoop: lpc-snoop@90 {
+            compatible = "aspeed,ast2600-lpc-snoop";
+            reg = <0x90 0x8>;
+            interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+            snoop-ports = <0x80>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt
deleted file mode 100644
index 857ee33f7329..000000000000
--- a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-The Aspeed System Control Unit manages the global behaviour of the SoC,
-configuring elements such as clocks, pinmux, and reset.
-
-Required properties:
-- compatible:	One of:
-		"aspeed,ast2400-scu", "syscon", "simple-mfd"
-		"aspeed,ast2500-scu", "syscon", "simple-mfd"
-
-- reg:		contains the offset and length of the SCU memory region
-- #clock-cells: should be set to <1> - the system controller is also a
-	clock provider
-- #reset-cells: should be set to <1> - the system controller is also a
-	reset line provider
-
-Example:
-
-syscon: syscon@1e6e2000 {
-	compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
-	reg = <0x1e6e2000 0x1a8>;
-	#clock-cells = <1>;
-	#reset-cells = <1>;
-};
-
-Silicon ID
------------------
-
-Families have unique hardware silicon identifiers within the SoC.
-
-Required properties:
-
- - compatible:		"aspeed,silicon-id" or:
-			"aspeed,ast2400-silicon-id" or
-			"aspeed,ast2500-silicon-id" or
-			"aspeed,ast2600-silicon-id"
-
- - reg:			offset and length of the silicon id information
-			optionally, a second offset and length describes the unique chip id
-
-			The reg should be the unique silicon id register, and
-			not backwards compatible one in eg. the 2600.
-
-Example:
-
-
-silicon-id@7c {
-        compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
-        reg = <0x7c 0x4 0x150 0x8>;
-};
diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
index 692300117c64..9d837535637b 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
@@ -54,7 +54,7 @@ flexcom@f8034000 {
 		clock-names = "spi_clk";
 		atmel,fifo-size = <32>;
 
-		mtd_dataflash@0 {
+		flash@0 {
 			compatible = "atmel,at25f512b";
 			reg = <0>;
 			spi-max-frequency = <20000000>;
diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
deleted file mode 100644
index a09133066aff..000000000000
--- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
-
-Required properties for USART:
-- compatible: Should be one of the following:
-	- "atmel,at91rm9200-usart"
-	- "atmel,at91sam9260-usart"
-	- "microchip,sam9x60-usart"
-	- "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
-	- "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"
-	- "microchip,sam9x60-dbgu", "microchip,sam9x60-usart"
-- reg: Should contain registers location and length
-- interrupts: Should contain interrupt
-- clock-names: tuple listing input clock names.
-	Required elements: "usart"
-- clocks: phandles to input clocks.
-
-Required properties for USART in SPI mode:
-- #size-cells      : Must be <0>
-- #address-cells   : Must be <1>
-- cs-gpios: chipselects (internal cs not supported)
-- atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h)
-
-Optional properties in serial and SPI mode:
-- dma bindings for dma transfer:
-	- dmas: DMA specifier, consisting of a phandle to DMA controller node,
-		memory peripheral interface and USART DMA channel ID, FIFO configuration.
-		The order of DMA channels is fixed. The first DMA channel must be TX
-		associated channel and the second one must be RX associated channel.
-		Refer to dma.txt and atmel-dma.txt for details.
-	- dma-names: "tx" for TX channel.
-		     "rx" for RX channel.
-		     The order of dma-names is also fixed. The first name must be "tx"
-		     and the second one must be "rx" as in the examples below.
-
-Optional properties in serial mode:
-- atmel,use-dma-rx: use of PDC or DMA for receiving data
-- atmel,use-dma-tx: use of PDC or DMA for transmitting data
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
-  It will use specified PIO instead of the peripheral function pin for the USART feature.
-  If unsure, don't specify this property.
-- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
-  capable USARTs.
-- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt
-
-<chip> compatible description:
-- at91rm9200:  legacy USART support
-- at91sam9260: generic USART implementation for SAM9 SoCs
-
-Example:
-- use PDC:
-	usart0: serial@fff8c000 {
-		compatible = "atmel,at91sam9260-usart";
-		reg = <0xfff8c000 0x4000>;
-		interrupts = <7>;
-		clocks = <&usart0_clk>;
-		clock-names = "usart";
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
-		rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
-		cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
-		dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
-		dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
-		dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
-		rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
-	};
-
-- use DMA:
-	usart0: serial@f001c000 {
-		compatible = "atmel,at91sam9260-usart";
-		reg = <0xf001c000 0x100>;
-		interrupts = <12 4 5>;
-		clocks = <&usart0_clk>;
-		clock-names = "usart";
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
-		dmas = <&dma0 2 0x3>,
-		       <&dma0 2 0x204>;
-		dma-names = "tx", "rx";
-		atmel,fifo-size = <32>;
-	};
-
-- SPI mode:
-	#include <dt-bindings/mfd/at91-usart.h>
-
-	spi0: spi@f001c000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart";
-		atmel,usart-mode = <AT91_USART_MODE_SPI>;
-		reg = <0xf001c000 0x100>;
-		interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
-		clocks = <&usart0_clk>;
-		clock-names = "usart";
-		dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
-		       <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
-		dma-names = "tx", "rx";
-		cs-gpios = <&pioB 3 0>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
deleted file mode 100644
index 2b53dcc0ea61..000000000000
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ /dev/null
@@ -1,273 +0,0 @@
-AXP family PMIC device tree bindings
-
-The axp20x family current members :
-axp152 (X-Powers)
-axp202 (X-Powers)
-axp209 (X-Powers)
-axp221 (X-Powers)
-axp223 (X-Powers)
-axp803 (X-Powers)
-axp806 (X-Powers)
-axp809 (X-Powers)
-axp813 (X-Powers)
-
-The AXP813 is 2 chips packaged into 1. The 2 chips do not share anything
-other than the packaging. Pins are routed separately. As such they should
-be treated as separate entities. The other half is an AC100 RTC/codec
-combo chip. Please see ./ac100.txt for its bindings.
-
-Required properties:
-- compatible: should be one of:
-    * "x-powers,axp152"
-    * "x-powers,axp202"
-    * "x-powers,axp209"
-    * "x-powers,axp221"
-    * "x-powers,axp223"
-    * "x-powers,axp803"
-    * "x-powers,axp806"
-    * "x-powers,axp805", "x-powers,axp806"
-    * "x-powers,axp305", "x-powers,axp805", "x-powers,axp806"
-    * "x-powers,axp809"
-    * "x-powers,axp813"
-- reg: The I2C slave address or RSB hardware address for the AXP chip
-- interrupt-controller: The PMIC has its own internal IRQs
-- #interrupt-cells: Should be set to 1
-
-Supported common regulator properties, see ../regulator/regulator.txt for
-more information:
-- regulator-ramp-delay: sets the ramp up delay in uV/us
-			AXP20x/DCDC2: 1600, 800
-			AXP20x/LDO3:  1600, 800
-- regulator-soft-start:	enable the output at the lowest possible voltage and
-			only then set the desired voltage
-			AXP20x/LDO3: software-based implementation
-
-Optional properties:
-- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
-- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz
-		      AXP152/20X: range:  750-1875, Default: 1.5 MHz
-		      AXP22X/8XX: range: 1800-4050, Default: 3   MHz
-
-- x-powers,drive-vbus-en: boolean, set this when the N_VBUSEN pin is
-			  used as an output pin to control an external
-			  regulator to drive the OTG VBus, rather then
-			  as an input pin which signals whether the
-			  board is driving OTG VBus or not.
-			  (axp221 / axp223 / axp803/ axp813 only)
-
-- x-powers,self-working-mode and
-  x-powers,master-mode: Boolean (axp806 only). Set either of these when the
-			PMIC is wired for self-working mode or master mode.
-			If neither is set then slave mode is assumed.
-			This corresponds to how the MODESET pin is wired.
-
-- <input>-supply: a phandle to the regulator supply node. May be omitted if
-		  inputs are unregulated, such as using the IPSOUT output
-		  from the PMIC.
-
-- regulators: A node that houses a sub-node for each regulator. Regulators
-	      not used but preferred to be managed by the OS should be
-	      listed as well.
-	      See Documentation/devicetree/bindings/regulator/regulator.txt
-	      for more information on standard regulator bindings.
-
-Optional properties for DCDC regulators:
-- x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO (PWM/PFM) mode
-			  Default: Current hardware setting
-			  The DCDC regulators work in a mixed PWM/PFM mode,
-			  using PFM under light loads and switching to PWM
-			  for heavier loads. Forcing PWM mode trades efficiency
-			  under light loads for lower output noise. This
-			  probably makes sense for HiFi audio related
-			  applications that aren't battery constrained.
-
-AXP202/AXP209 regulators, type, and corresponding input supply names:
-
-Regulator	  Type		  Supply Name		  Notes
----------	  ----		  -----------		  -----
-DCDC2		: DC-DC buck	: vin2-supply
-DCDC3		: DC-DC	buck	: vin3-supply
-LDO1		: LDO		: acin-supply		: always on
-LDO2		: LDO		: ldo24in-supply	: shared supply
-LDO3		: LDO		: ldo3in-supply
-LDO4		: LDO		: ldo24in-supply	: shared supply
-LDO5		: LDO		: ldo5in-supply
-
-AXP221/AXP223 regulators, type, and corresponding input supply names:
-
-Regulator	  Type		  Supply Name		  Notes
----------	  ----		  -----------		  -----
-DCDC1		: DC-DC buck	: vin1-supply
-DCDC2		: DC-DC buck	: vin2-supply
-DCDC3		: DC-DC	buck	: vin3-supply
-DCDC4		: DC-DC	buck	: vin4-supply
-DCDC5		: DC-DC	buck	: vin5-supply
-DC1SW		: On/Off Switch	:			: DCDC1 secondary output
-DC5LDO		: LDO		:			: input from DCDC5
-ALDO1		: LDO		: aldoin-supply		: shared supply
-ALDO2		: LDO		: aldoin-supply		: shared supply
-ALDO3		: LDO		: aldoin-supply		: shared supply
-DLDO1		: LDO		: dldoin-supply		: shared supply
-DLDO2		: LDO		: dldoin-supply		: shared supply
-DLDO3		: LDO		: dldoin-supply		: shared supply
-DLDO4		: LDO		: dldoin-supply		: shared supply
-ELDO1		: LDO		: eldoin-supply		: shared supply
-ELDO2		: LDO		: eldoin-supply		: shared supply
-ELDO3		: LDO		: eldoin-supply		: shared supply
-LDO_IO0		: LDO		: ips-supply		: GPIO 0
-LDO_IO1		: LDO		: ips-supply		: GPIO 1
-RTC_LDO		: LDO		: ips-supply		: always on
-DRIVEVBUS	: Enable output	: drivevbus-supply	: external regulator
-
-AXP803 regulators, type, and corresponding input supply names:
-
-Regulator	  Type		  Supply Name		  Notes
----------	  ----		  -----------		  -----
-DCDC1		: DC-DC buck	: vin1-supply
-DCDC2		: DC-DC buck	: vin2-supply		: poly-phase capable
-DCDC3		: DC-DC	buck	: vin3-supply		: poly-phase capable
-DCDC4		: DC-DC	buck	: vin4-supply
-DCDC5		: DC-DC	buck	: vin5-supply		: poly-phase capable
-DCDC6		: DC-DC	buck	: vin6-supply		: poly-phase capable
-DC1SW		: On/Off Switch	:			: DCDC1 secondary output
-ALDO1		: LDO		: aldoin-supply		: shared supply
-ALDO2		: LDO		: aldoin-supply		: shared supply
-ALDO3		: LDO		: aldoin-supply		: shared supply
-DLDO1		: LDO		: dldoin-supply		: shared supply
-DLDO2		: LDO		: dldoin-supply		: shared supply
-DLDO3		: LDO		: dldoin-supply		: shared supply
-DLDO4		: LDO		: dldoin-supply		: shared supply
-ELDO1		: LDO		: eldoin-supply		: shared supply
-ELDO2		: LDO		: eldoin-supply		: shared supply
-ELDO3		: LDO		: eldoin-supply		: shared supply
-FLDO1		: LDO		: fldoin-supply		: shared supply
-FLDO2		: LDO		: fldoin-supply		: shared supply
-LDO_IO0		: LDO		: ips-supply		: GPIO 0
-LDO_IO1		: LDO		: ips-supply		: GPIO 1
-RTC_LDO		: LDO		: ips-supply		: always on
-DRIVEVBUS	: Enable output	: drivevbus-supply	: external regulator
-
-AXP806 regulators, type, and corresponding input supply names:
-
-Regulator	  Type		  Supply Name		  Notes
----------	  ----		  -----------		  -----
-DCDCA		: DC-DC buck	: vina-supply		: poly-phase capable
-DCDCB		: DC-DC buck	: vinb-supply		: poly-phase capable
-DCDCC		: DC-DC	buck	: vinc-supply		: poly-phase capable
-DCDCD		: DC-DC	buck	: vind-supply		: poly-phase capable
-DCDCE		: DC-DC	buck	: vine-supply		: poly-phase capable
-ALDO1		: LDO		: aldoin-supply		: shared supply
-ALDO2		: LDO		: aldoin-supply		: shared supply
-ALDO3		: LDO		: aldoin-supply		: shared supply
-BLDO1		: LDO		: bldoin-supply		: shared supply
-BLDO2		: LDO		: bldoin-supply		: shared supply
-BLDO3		: LDO		: bldoin-supply		: shared supply
-BLDO4		: LDO		: bldoin-supply		: shared supply
-CLDO1		: LDO		: cldoin-supply		: shared supply
-CLDO2		: LDO		: cldoin-supply		: shared supply
-CLDO3		: LDO		: cldoin-supply		: shared supply
-SW		: On/Off Switch : swin-supply
-
-Additionally, the AXP806 DC-DC regulators support poly-phase arrangements
-for higher output current. The possible groupings are: A+B, A+B+C, D+E.
-
-AXP809 regulators, type, and corresponding input supply names:
-
-Regulator	  Type		  Supply Name		  Notes
----------	  ----		  -----------		  -----
-DCDC1		: DC-DC buck	: vin1-supply
-DCDC2		: DC-DC buck	: vin2-supply
-DCDC3		: DC-DC	buck	: vin3-supply
-DCDC4		: DC-DC	buck	: vin4-supply
-DCDC5		: DC-DC	buck	: vin5-supply
-DC1SW		: On/Off Switch	:			: DCDC1 secondary output
-DC5LDO		: LDO		:			: input from DCDC5
-ALDO1		: LDO		: aldoin-supply		: shared supply
-ALDO2		: LDO		: aldoin-supply		: shared supply
-ALDO3		: LDO		: aldoin-supply		: shared supply
-DLDO1		: LDO		: dldoin-supply		: shared supply
-DLDO2		: LDO		: dldoin-supply		: shared supply
-ELDO1		: LDO		: eldoin-supply		: shared supply
-ELDO2		: LDO		: eldoin-supply		: shared supply
-ELDO3		: LDO		: eldoin-supply		: shared supply
-LDO_IO0		: LDO		: ips-supply		: GPIO 0
-LDO_IO1		: LDO		: ips-supply		: GPIO 1
-RTC_LDO		: LDO		: ips-supply		: always on
-SW		: On/Off Switch : swin-supply
-
-AXP813 regulators, type, and corresponding input supply names:
-
-Regulator	  Type		  Supply Name		  Notes
----------	  ----		  -----------		  -----
-DCDC1		: DC-DC buck	: vin1-supply
-DCDC2		: DC-DC buck	: vin2-supply		: poly-phase capable
-DCDC3		: DC-DC	buck	: vin3-supply		: poly-phase capable
-DCDC4		: DC-DC	buck	: vin4-supply
-DCDC5		: DC-DC	buck	: vin5-supply		: poly-phase capable
-DCDC6		: DC-DC	buck	: vin6-supply		: poly-phase capable
-DCDC7		: DC-DC	buck	: vin7-supply
-ALDO1		: LDO		: aldoin-supply		: shared supply
-ALDO2		: LDO		: aldoin-supply		: shared supply
-ALDO3		: LDO		: aldoin-supply		: shared supply
-DLDO1		: LDO		: dldoin-supply		: shared supply
-DLDO2		: LDO		: dldoin-supply		: shared supply
-DLDO3		: LDO		: dldoin-supply		: shared supply
-DLDO4		: LDO		: dldoin-supply		: shared supply
-ELDO1		: LDO		: eldoin-supply		: shared supply
-ELDO2		: LDO		: eldoin-supply		: shared supply
-ELDO3		: LDO		: eldoin-supply		: shared supply
-FLDO1		: LDO		: fldoin-supply		: shared supply
-FLDO2		: LDO		: fldoin-supply		: shared supply
-FLDO3		: LDO		: fldoin-supply		: shared supply
-LDO_IO0		: LDO		: ips-supply		: GPIO 0
-LDO_IO1		: LDO		: ips-supply		: GPIO 1
-RTC_LDO		: LDO		: ips-supply		: always on
-SW		: On/Off Switch : swin-supply
-DRIVEVBUS	: Enable output	: drivevbus-supply	: external regulator
-
-Example:
-
-axp209: pmic@34 {
-	compatible = "x-powers,axp209";
-	reg = <0x34>;
-	interrupt-parent = <&nmi_intc>;
-	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-	interrupt-controller;
-	#interrupt-cells = <1>;
-
-	regulators {
-		x-powers,dcdc-freq = <1500>;
-
-		vdd_cpu: dcdc2 {
-			regulator-always-on;
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1450000>;
-			regulator-name = "vdd-cpu";
-		};
-
-		vdd_int_dll: dcdc3 {
-			regulator-always-on;
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-name = "vdd-int-dll";
-		};
-
-		vdd_rtc: ldo1 {
-			regulator-always-on;
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-name = "vdd-rtc";
-		};
-
-		avcc: ldo2 {
-			regulator-always-on;
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-name = "avcc";
-		};
-
-		ldo3 {
-			/* unused but preferred to be managed by OS */
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt b/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
deleted file mode 100644
index 1d6413e96c37..000000000000
--- a/Documentation/devicetree/bindings/mfd/bd9571mwv.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-* ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC) bindings
-
-Required properties:
- - compatible		: Should be "rohm,bd9571mwv" or "rohm,bd9574mwf".
- - reg			: I2C slave address.
- - interrupts		: The interrupt line the device is connected to.
- - interrupt-controller	: Marks the device node as an interrupt controller.
- - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
-			    The first cell is the IRQ number.
-			    The second cell is the flags, encoded as trigger
-			    masks from ../interrupt-controller/interrupts.txt.
- - gpio-controller      : Marks the device node as a GPIO Controller.
- - #gpio-cells          : Should be two.  The first cell is the pin number and
-                            the second cell is used to specify flags.
-                            See ../gpio/gpio.txt for more information.
- - regulators:          : List of child nodes that specify the regulator
-                            initialization data. Child nodes must be named
-                            after their hardware counterparts:
-			     - vd09
-			     - vd18
-			     - vd25
-			     - vd33
-			     - dvfs
-			    Each child node is defined using the standard
-			    binding for regulators.
-
-Optional properties:
-  - rohm,ddr-backup-power : Value to use for DDR-Backup Power (default 0).
-			    This is a bitmask that specifies which DDR power
-			    rails need to be kept powered when backup mode is
-			    entered, for system suspend:
-			      - bit 0: DDR0
-			      - bit 1: DDR1
-			      - bit 2: DDR0C
-			      - bit 3: DDR1C
-			    These bits match the KEEPON_DDR* bits in the
-			    documentation for the "BKUP Mode Cnt" register.
-  - rohm,rstbmode-level: The RSTB signal is configured for level mode, to
-			 accommodate a toggle power switch (the RSTBMODE pin is
-			 strapped low).
-  - rohm,rstbmode-pulse: The RSTB signal is configured for pulse mode, to
-			 accommodate a momentary power switch (the RSTBMODE pin
-			 is strapped high).
-			 The two properties above are mutually exclusive.
-
-Example:
-
-	pmic: pmic@30 {
-		compatible = "rohm,bd9571mwv";
-		reg = <0x30>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		rohm,ddr-backup-power = <0xf>;
-		rohm,rstbmode-pulse;
-
-		regulators {
-			dvfs: dvfs {
-				regulator-name = "dvfs";
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1030000>;
-				regulator-boot-on;
-				regulator-always-on;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
index afc569bc15cf..148f1da47603 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm6318-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6318 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM6318 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
index c7771c86d7c1..7e582243ea76 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm63268-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM63268 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM63268 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
index 33963c11ae62..2230848e11c3 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm6328-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6328 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM6328 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
index 3e44bea78b03..c06693b6f7aa 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm6358-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6358 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM6358 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
index 48d14a5fe0d5..c560bede0e37 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm6362-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6362 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM6362 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
index 307270b0cfed..c534f5f2404e 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/brcm,bcm6368-gpio-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM6368 GPIO System Controller Device Tree Bindings
+title: Broadcom BCM6368 GPIO System Controller
 
 maintainers:
   - Álvaro Fernández Rojas <noltari@gmail.com>
diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
index 28ac60acf4ac..b85819fbb07c 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
@@ -36,9 +36,15 @@ patternProperties:
   '^clock-controller@[a-f0-9]+$':
     $ref: ../clock/brcm,iproc-clocks.yaml
 
-  '^pin-controller@[a-f0-9]+$':
+  '^phy@[a-f0-9]+$':
+    $ref: ../phy/bcm-ns-usb2-phy.yaml
+
+  '^pinctrl@[a-f0-9]+$':
     $ref: ../pinctrl/brcm,ns-pinmux.yaml
 
+  '^syscon@[a-f0-9]+$':
+    $ref: syscon.yaml
+
   '^thermal@[a-f0-9]+$':
     $ref: ../thermal/brcm,ns-thermal.yaml
 
@@ -49,6 +55,7 @@ required:
 
 examples:
   - |
+    #include <dt-bindings/clock/bcm-nsp.h>
     cru-bus@1800c100 {
         compatible = "brcm,ns-cru", "simple-mfd";
         reg = <0x1800c100 0x1d0>;
@@ -73,7 +80,21 @@ examples:
                                  "iprocfast", "sata1", "sata2";
         };
 
-        pin-controller@1c0 {
+        phy@164 {
+            compatible = "brcm,ns-usb2-phy";
+            reg = <0x164 0x4>;
+            brcm,syscon-clkset = <&clkset>;
+            clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+            clock-names = "phy-ref-clk";
+            #phy-cells = <0>;
+        };
+
+        clkset: syscon@180 {
+            compatible = "brcm,cru-clkset", "syscon";
+            reg = <0x180 0x4>;
+        };
+
+        pinctrl@1c0 {
             compatible = "brcm,bcm4708-pinmux";
             reg = <0x1c0 0x24>;
             reg-names = "cru_gpio_control";
diff --git a/Documentation/devicetree/bindings/mfd/brcm,misc.yaml b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml
new file mode 100644
index 000000000000..cff7d772a7db
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,misc.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's MISC block
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Broadcom's MISC is a hardware block used on some SoCs (e.g. bcm63xx and
+  bcm4908). It's used to implement some simple functions like a watchdog, PCIe
+  reset, UniMAC control and more.
+
+properties:
+  compatible:
+    items:
+      - const: brcm,misc
+      - const: simple-mfd
+
+  reg:
+    description: MISC block registers
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  '^reset-controller@[a-f0-9]+$':
+    $ref: ../reset/brcm,bcm4908-misc-pcie-reset.yaml
+
+additionalProperties: false
+
+required:
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+examples:
+  - |
+    misc@ff802600 {
+        compatible = "brcm,misc", "simple-mfd";
+        reg = <0xff802600 0xe4>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x0 0xe4>;
+
+        reset-controller@44 {
+            compatible = "brcm,bcm4908-misc-pcie-reset";
+            reg = <0x44 0x4>;
+            #reset-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/brcm,twd.yaml b/Documentation/devicetree/bindings/mfd/brcm,twd.yaml
new file mode 100644
index 000000000000..e5136a37b0a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,twd.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,twd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom's Timer-Watchdog (aka TWD)
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Broadcom has a Timer-Watchdog block used in multiple SoCs (e.g., BCM4908,
+  BCM63xx, BCM7038). There are few variants available (they differ slightly in
+  registers layout). This block consists of: timers, watchdog and optionally a
+  software reset handler.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm4908-twd
+          - brcm,bcm7038-twd
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  '^timer@[a-f0-9]+$':
+    $ref: /schemas/timer/brcm,bcmbca-timer.yaml
+
+  '^watchdog@[a-f0-9]+$':
+    $ref: /schemas/watchdog/brcm,bcm7038-wdt.yaml
+
+additionalProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    timer-mfd@ff800400 {
+        compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+        reg = <0xff800400 0x4c>;
+        ranges = <0x00000000 0xff800400 0x4c>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        timer@0 {
+            compatible = "brcm,bcm63138-timer";
+            reg = <0x0 0x28>;
+        };
+
+        watchdog@28 {
+            compatible = "brcm,bcm7038-wdt";
+            reg = <0x28 0x8>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
index c24ad45cabb5..8459d3642205 100644
--- a/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
+++ b/Documentation/devicetree/bindings/mfd/canaan,k210-sysctl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/canaan,k210-sysctl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Canaan Kendryte K210 System Controller Device Tree Bindings
+title: Canaan Kendryte K210 System Controller
 
 maintainers:
   - Damien Le Moal <damien.lemoal@wdc.com>
@@ -36,7 +36,7 @@ properties:
   clock-controller:
     # Child node
     type: object
-    $ref: "../clock/canaan,k210-clk.yaml"
+    $ref: ../clock/canaan,k210-clk.yaml
     description:
       Clock controller for the SoC clocks. This child node definition
       should follow the bindings specified in
@@ -45,7 +45,7 @@ properties:
   reset-controller:
     # Child node
     type: object
-    $ref: "../reset/canaan,k210-rst.yaml"
+    $ref: ../reset/canaan,k210-rst.yaml
     description:
       Reset controller for the SoC. This child node definition
       should follow the bindings specified in
@@ -54,7 +54,7 @@ properties:
   syscon-reboot:
     # Child node
     type: object
-    $ref: "../power/reset/syscon-reboot.yaml"
+    $ref: ../power/reset/syscon-reboot.yaml
     description:
       Reboot method for the SoC. This child node definition
       should follow the bindings specified in
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
index c00ad3e21c21..ebbedabb2bd4 100644
--- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
+++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
@@ -126,7 +126,7 @@ properties:
       clock-frequency:
         const: 12288000
 
-  lochnagar-pinctrl:
+  pinctrl:
     type: object
     $ref: /schemas/pinctrl/cirrus,lochnagar.yaml#
 
@@ -144,6 +144,7 @@ properties:
       CODECs digital core if not being provided by an internal regulator.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -161,6 +162,7 @@ properties:
       CODECs MICVDD.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -177,6 +179,7 @@ properties:
       Initialisation data for the MIC1VDD supplies.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -202,6 +205,7 @@ properties:
       Initialisation data for the MIC2VDD supplies.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -228,6 +232,7 @@ properties:
       the CODECs analog and 1.8V digital supplies.
     type: object
     $ref: /schemas/regulator/regulator.yaml#
+    unevaluatedProperties: false
     properties:
       compatible:
         enum:
@@ -255,13 +260,13 @@ required:
   - reg
   - reset-gpios
   - lochnagar-clk
-  - lochnagar-pinctrl
+  - pinctrl
 
 additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clk/lochnagar.h>
+    #include <dt-bindings/clock/lochnagar.h>
     #include <dt-bindings/pinctrl/lochnagar.h>
     i2c@e0004000 {
         #address-cells = <1>;
@@ -293,7 +298,7 @@ examples:
                 clock-frequency = <32768>;
             };
 
-            lochnagar-pinctrl {
+            pinctrl {
                 compatible = "cirrus,lochnagar-pinctrl";
 
                 gpio-controller;
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
index 499c62c04daa..68c75a517c92 100644
--- a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
+++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
@@ -221,7 +221,6 @@ required:
   - '#gpio-cells'
   - interrupt-controller
   - '#interrupt-cells'
-  - interrupt-parent
   - interrupts
   - AVDD-supply
   - DBVDD1-supply
@@ -246,8 +245,7 @@ examples:
 
             interrupt-controller;
             #interrupt-cells = <2>;
-            interrupts = <&host_irq1>;
-            interrupt-parent = <&gic>;
+            interrupts = <4 1 0>;
 
             gpio-controller;
             #gpio-cells = <2>;
diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt
index bab0d0e66cb3..e4eedd3bd233 100644
--- a/Documentation/devicetree/bindings/mfd/da9062.txt
+++ b/Documentation/devicetree/bindings/mfd/da9062.txt
@@ -33,11 +33,6 @@ Required properties:
     "dlg,da9061" for DA9061
 - reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
   modified to match the chip's OTP settings).
-- interrupts : IRQ line information.
-- interrupt-controller
-
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-further information on IRQ bindings.
 
 Optional properties:
 
@@ -48,6 +43,12 @@ Optional properties:
 See Documentation/devicetree/bindings/gpio/gpio.txt for further information on
 GPIO bindings.
 
+- interrupts : IRQ line information.
+- interrupt-controller
+
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+further information on IRQ bindings.
+
 Sub-nodes:
 
 - regulators : This node defines the settings for the LDOs and BUCKs.
@@ -85,7 +86,7 @@ Sub-nodes:
 
 - onkey : See ../input/da9062-onkey.txt
 
-- watchdog: See ../watchdog/da9062-watchdog.txt
+- watchdog: See ../watchdog/da9062-wdt.txt
 
 - thermal : See ../thermal/da9062-thermal.txt
 
diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
deleted file mode 100644
index 8da879935c59..000000000000
--- a/Documentation/devicetree/bindings/mfd/da9063.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
-
-DA9093 consists of a large and varied group of sub-devices (I2C Only):
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9063-regulator        :               : LDOs & BUCKs
-da9063-onkey            :               : On Key
-da9063-rtc              :               : Real-Time Clock (DA9063 only)
-da9063-watchdog         :               : Watchdog
-
-======
-
-Required properties:
-
-- compatible : Should be "dlg,da9063" or "dlg,da9063l"
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
-  modified to match the chip's OTP settings).
-- interrupts : IRQ line information.
-- interrupt-controller
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
-  The DA9063(L) regulators are bound using their names listed below:
-
-    bcore1    : BUCK CORE1
-    bcore2    : BUCK CORE2
-    bpro      : BUCK PRO
-    bmem      : BUCK MEM
-    bio       : BUCK IO
-    bperi     : BUCK PERI
-    ldo1      : LDO_1	(DA9063 only)
-    ldo2      : LDO_2	(DA9063 only)
-    ldo3      : LDO_3
-    ldo4      : LDO_4	(DA9063 only)
-    ldo5      : LDO_5	(DA9063 only)
-    ldo6      : LDO_6	(DA9063 only)
-    ldo7      : LDO_7
-    ldo8      : LDO_8
-    ldo9      : LDO_9
-    ldo10     : LDO_10	(DA9063 only)
-    ldo11     : LDO_11
-
-  The component follows the standard regulator framework and the bindings
-  details of individual regulator device can be found in:
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-- rtc : This node defines settings for the Real-Time Clock associated with
-  the DA9063 only. The RTC is not present in DA9063L. There are currently
-  no entries in this binding, however compatible = "dlg,da9063-rtc" should
-  be added if a node is created.
-
-- onkey : This node defines the OnKey settings for controlling the key
-  functionality of the device. The node should contain the compatible property
-  with the value "dlg,da9063-onkey".
-
-  Optional onkey properties:
-
-  - dlg,disable-key-power : Disable power-down using a long key-press. If this
-    entry exists the OnKey driver will remove support for the KEY_POWER key
-    press. If this entry does not exist then by default the key-press
-    triggered power down is enabled and the OnKey will support both KEY_POWER
-    and KEY_SLEEP.
-
-- watchdog : This node defines settings for the Watchdog timer associated
-  with the DA9063 and DA9063L. There are currently no entries in this
-  binding, however compatible = "dlg,da9063-watchdog" should be added
-  if a node is created.
-
-
-Example:
-
-	pmic0: da9063@58 {
-		compatible = "dlg,da9063"
-		reg = <0x58>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		wdt {
-			compatible = "dlg,da9063-watchdog";
-		};
-
-		onkey {
-			compatible = "dlg,da9063-onkey";
-			dlg,disable-key-power;
-		};
-
-		regulators {
-			DA9063_BCORE1: bcore1 {
-				regulator-name = "BCORE1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp = <500000>;
-				regulator-max-microamp = <2000000>;
-				regulator-boot-on;
-			};
-			DA9063_LDO11: ldo11 {
-				regulator-name = "LDO_11";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-boot-on;
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
new file mode 100644
index 000000000000..f6967c1f6235
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/delta,tn48m-cpld.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Delta Networks TN48M CPLD controller
+
+maintainers:
+  - Robert Marko <robert.marko@sartura.hr>
+
+description: |
+  Lattice CPLD onboard the TN48M switches is used for system
+  management.
+
+  It provides information about the hardware model, revision,
+  PSU status etc.
+
+  It is also being used as a GPIO expander and reset controller
+  for the switch MAC-s and other peripherals.
+
+properties:
+  compatible:
+    const: delta,tn48m-cpld
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+patternProperties:
+  "^gpio(@[0-9a-f]+)?$":
+    $ref: ../gpio/delta,tn48m-gpio.yaml
+
+  "^reset-controller?$":
+    $ref: ../reset/delta,tn48m-reset.yaml
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpld@41 {
+            compatible = "delta,tn48m-cpld";
+            reg = <0x41>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            gpio@31 {
+                compatible = "delta,tn48m-gpo";
+                reg = <0x31>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@3a {
+                compatible = "delta,tn48m-gpi";
+                reg = <0x3a>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@40 {
+                compatible = "delta,tn48m-gpi";
+                reg = <0x40>;
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            reset-controller {
+              compatible = "delta,tn48m-reset";
+              #reset-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
new file mode 100644
index 000000000000..c5a7e10d7d80
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Steve Twiss <stwiss.opensource@diasemi.com>
+
+description: |
+  For device-tree bindings of other sub-modules refer to the binding documents
+  under the respective sub-system directories.
+  Using regulator-{uv,ov}-{warn,error,protection}-microvolt requires special
+  handling: First, when GP_FB2 is used, it must be ensured that there is no
+  moment where all voltage monitors are disabled. Next, as da9063 only supports
+  UV *and* OV monitoring, both must be set to the same severity and value
+  (0: disable, 1: enable).
+
+properties:
+  compatible:
+    enum:
+      - dlg,da9063
+      - dlg,da9063l
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  dlg,use-sw-pm:
+    type: boolean
+    description:
+      Disable the watchdog during suspend.
+      Only use this option if you can't use the watchdog automatic suspend
+      function during a suspend (see register CONTROL_B).
+
+  watchdog:
+    type: object
+    $ref: /schemas/watchdog/watchdog.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        const: dlg,da9063-watchdog
+
+  rtc:
+    type: object
+    $ref: /schemas/rtc/rtc.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        const: dlg,da9063-rtc
+
+  onkey:
+    type: object
+    $ref: /schemas/input/input.yaml#
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        const: dlg,da9063-onkey
+
+      dlg,disable-key-power:
+        type: boolean
+        description: |
+          Disable power-down using a long key-press.
+          If this entry does not exist then by default the key-press triggered
+          power down is enabled and the OnKey will support both KEY_POWER and
+          KEY_SLEEP.
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$":
+        $ref: /schemas/regulator/regulator.yaml
+        unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@58 {
+        compatible = "dlg,da9063";
+        reg = <0x58>;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+
+        rtc {
+          compatible = "dlg,da9063-rtc";
+        };
+
+        watchdog {
+          compatible = "dlg,da9063-watchdog";
+        };
+
+        onkey {
+          compatible = "dlg,da9063-onkey";
+          dlg,disable-key-power;
+        };
+
+        regulators {
+          bcore1 {
+            regulator-name = "BCORE1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1570000>;
+            regulator-min-microamp = <500000>;
+            regulator-max-microamp = <2000000>;
+            regulator-boot-on;
+          };
+          ldo6 {
+            /* UNUSED */
+            regulator-name = "LDO_6";
+            regulator-uv-protection-microvolt = <0>;
+            regulator-ov-protection-microvolt = <0>;
+          };
+          ldo11 {
+            regulator-name = "LDO_11";
+            regulator-min-microvolt = <900000>;
+            regulator-max-microvolt = <900000>;
+            regulator-uv-protection-microvolt = <1>;
+            regulator-ov-protection-microvolt = <1>;
+            regulator-always-on;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
index 08af356f5d27..9b11b6e2bbf7 100644
--- a/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
+++ b/Documentation/devicetree/bindings/mfd/ene-kb3930.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/ene-kb3930.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ENE KB3930 Embedded Controller bindings
+title: ENE KB3930 Embedded Controller
 
 description: |
   This binding describes the ENE KB3930 Embedded Controller attached to an
diff --git a/Documentation/devicetree/bindings/mfd/ene-kb930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml
index 06ed9ec8f4bb..02c111def5de 100644
--- a/Documentation/devicetree/bindings/mfd/ene-kb930.yaml
+++ b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/ene-kb930.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ENE KB930 Embedded Controller bindings
+title: ENE KB930 Embedded Controller
 
 description: |
   This binding describes the ENE KB930 Embedded Controller attached to an
@@ -13,6 +13,8 @@ description: |
 maintainers:
   - Dmitry Osipenko <digetx@gmail.com>
 
+$ref: /schemas/power/supply/power-supply.yaml
+
 properties:
   compatible:
     items:
@@ -22,15 +24,13 @@ properties:
   reg:
     maxItems: 1
 
-  monitored-battery: true
-  power-supplies: true
   system-power-controller: true
 
 required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
new file mode 100644
index 000000000000..20067002cc4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Control and Status Registers Module
+
+maintainers:
+  - Liu Ying <victor.liu@nxp.com>
+
+description: |
+  As a system controller, the Freescale i.MX8qm/qxp Control and Status
+  Registers(CSR) module represents a set of miscellaneous registers of a
+  specific subsystem.  It may provide control and/or status report interfaces
+  to a mix of standalone hardware devices within that subsystem.  One typical
+  use-case is for some other nodes to acquire a reference to the syscon node
+  by phandle, and the other typical use-case is that the operating system
+  should consider all subnodes of the CSR module as separate child devices.
+
+properties:
+  $nodename:
+    pattern: "^syscon@[0-9a-f]+$"
+
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8qxp-mipi-lvds-csr
+          - fsl,imx8qm-lvds-csr
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+patternProperties:
+  "^(ldb|phy|pxl2dpi)$":
+    type: object
+    description: The possible child devices of the CSR module.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qxp-mipi-lvds-csr
+    then:
+      required:
+        - pxl2dpi
+        - ldb
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,imx8qm-lvds-csr
+    then:
+      required:
+        - phy
+        - ldb
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    mipi_lvds_0_csr: syscon@56221000 {
+        compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd";
+        reg = <0x56221000 0x1000>;
+        clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>;
+        clock-names = "ipg";
+
+        mipi_lvds_0_pxl2dpi: pxl2dpi {
+            compatible = "fsl,imx8qxp-pxl2dpi";
+            fsl,sc-resource = <IMX_SC_R_MIPI_0>;
+            power-domains = <&pd IMX_SC_R_MIPI_0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
+
+                    mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>;
+                    };
+
+                    mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 {
+                        reg = <1>;
+                        remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>;
+                    };
+                };
+
+                port@1 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <1>;
+
+                    mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>;
+                    };
+
+                    mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 {
+                        reg = <1>;
+                        remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>;
+                    };
+                };
+            };
+        };
+
+        mipi_lvds_0_ldb: ldb {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "fsl,imx8qxp-ldb";
+            clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>,
+                     <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>;
+            clock-names = "pixel", "bypass";
+            power-domains = <&pd IMX_SC_R_LVDS_0>;
+
+            channel@0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0>;
+                phys = <&mipi_lvds_0_phy>;
+                phy-names = "lvds_phy";
+
+                port@0 {
+                    reg = <0>;
+
+                    mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint {
+                        remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    /* ... */
+                };
+            };
+
+            channel@1 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <1>;
+                phys = <&mipi_lvds_0_phy>;
+                phy-names = "lvds_phy";
+
+                port@0 {
+                    reg = <0>;
+
+                    mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint {
+                        remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    /* ... */
+                };
+            };
+        };
+    };
+
+    mipi_lvds_0_phy: phy@56228300 {
+        compatible = "fsl,imx8qxp-mipi-dphy";
+        reg = <0x56228300 0x100>;
+        clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>;
+        clock-names = "phy_ref";
+        #phy-cells = <0>;
+        fsl,syscon = <&mipi_lvds_0_csr>;
+        power-domains = <&pd IMX_SC_R_MIPI_0>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
index 5a1e8d21f7a0..acb9c54942d9 100644
--- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
+++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -19,7 +19,6 @@ description: |
 
 maintainers:
   - Tim Harvey <tharvey@gateworks.com>
-  - Robert Jones <rjones@gateworks.com>
 
 properties:
   $nodename:
@@ -47,6 +46,7 @@ properties:
 
   adc:
     type: object
+    additionalProperties: false
     description: Optional hardware monitoring module
 
     properties:
@@ -60,8 +60,9 @@ properties:
         const: 0
 
     patternProperties:
-      "^channel@[0-9]+$":
+      "^channel@[0-9a-f]+$":
         type: object
+        additionalProperties: false
         description: |
           Properties for a single ADC which can report cooked values
           (i.e. temperature sensor based on thermister), raw values
@@ -114,6 +115,7 @@ properties:
 patternProperties:
   "^fan-controller@[0-9a-f]+$":
     type: object
+    additionalProperties: false
     description: Optional fan controller
 
     properties:
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index d793dd0316b7..e1ca4f297c6d 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -8,7 +8,6 @@ title: ChromeOS Embedded Controller
 
 maintainers:
   - Benson Leung <bleung@chromium.org>
-  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
   - Guenter Roeck <groeck@chromium.org>
 
 description:
@@ -21,36 +20,37 @@ properties:
   compatible:
     oneOf:
       - description:
-          For implementations of the EC is connected through I2C.
+          For implementations of the EC connected through I2C.
         const: google,cros-ec-i2c
       - description:
-          For implementations of the EC is connected through SPI.
+          For implementations of the EC connected through SPI.
         const: google,cros-ec-spi
       - description:
-          For implementations of the EC is connected through RPMSG.
+          For implementations of the FPMCU connected through SPI.
+        items:
+          - const: google,cros-ec-fp
+          - const: google,cros-ec-spi
+      - description:
+          For implementations of the EC connected through RPMSG.
         const: google,cros-ec-rpmsg
+      - description:
+          For implementations of the EC connected through UART.
+        const: google,cros-ec-uart
 
-  controller-data:
-    description:
-      SPI controller data, see bindings/spi/spi-samsung.txt
-    type: object
+  controller-data: true
 
   google,cros-ec-spi-pre-delay:
     description:
       This property specifies the delay in usecs between the
       assertion of the CS and the first clock pulse.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 0
-      - minimum: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
 
   google,cros-ec-spi-msg-delay:
     description:
       This property specifies the delay in usecs between messages.
-    allOf:
-      - $ref: /schemas/types.yaml#/definitions/uint32
-      - default: 0
-      - minimum: 0
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
 
   google,has-vbc-nvram:
     description:
@@ -59,16 +59,15 @@ properties:
       whether this nvram is present or not.
     type: boolean
 
-  mtk,rpmsg-name:
+  mediatek,rpmsg-name:
     description:
       Must be defined if the cros-ec is a rpmsg device for a Mediatek
-      ARM Cortex M4 Co-processor. Contains the name pf the rpmsg
+      ARM Cortex M4 Co-processor. Contains the name of the rpmsg
       device. Used to match the subnode to the rpmsg device announced by
       the SCP.
-    $ref: "/schemas/types.yaml#/definitions/string"
+    $ref: /schemas/types.yaml#/definitions/string
 
-  spi-max-frequency:
-    description: Maximum SPI frequency of the device in Hz.
+  spi-max-frequency: true
 
   reg:
     maxItems: 1
@@ -76,6 +75,15 @@ properties:
   interrupts:
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
+  boot0-gpios:
+    maxItems: 1
+    description: Assert for bootloader mode.
+
+  vdd-supply: true
+
   wakeup-source:
     description: Button can wake-up the system.
 
@@ -86,16 +94,23 @@ properties:
     const: 0
 
   typec:
-    $ref: "/schemas/chrome/google,cros-ec-typec.yaml#"
+    $ref: /schemas/chrome/google,cros-ec-typec.yaml#
 
   ec-pwm:
-    $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#"
+    $ref: /schemas/pwm/google,cros-ec-pwm.yaml#
+    deprecated: true
+
+  pwm:
+    $ref: /schemas/pwm/google,cros-ec-pwm.yaml#
+
+  kbd-led-backlight:
+    $ref: /schemas/chrome/google,cros-kbd-led-backlight.yaml#
 
   keyboard-controller:
-    $ref: "/schemas/input/google,cros-ec-keyb.yaml#"
+    $ref: /schemas/input/google,cros-ec-keyb.yaml#
 
   proximity:
-    $ref: "/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#"
+    $ref: /schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#
 
   codecs:
     type: object
@@ -111,7 +126,7 @@ properties:
     patternProperties:
       "^ec-codec@[a-f0-9]+$":
         type: object
-        $ref: "/schemas/sound/google,cros-ec-codec.yaml#"
+        $ref: /schemas/sound/google,cros-ec-codec.yaml#
 
     required:
       - "#address-cells"
@@ -136,31 +151,92 @@ properties:
 patternProperties:
   "^i2c-tunnel[0-9]*$":
     type: object
-    $ref: "/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#"
+    $ref: /schemas/i2c/google,cros-ec-i2c-tunnel.yaml#
 
   "^regulator@[0-9]+$":
     type: object
-    $ref: "/schemas/regulator/google,cros-ec-regulator.yaml#"
+    $ref: /schemas/regulator/google,cros-ec-regulator.yaml#
 
   "^extcon[0-9]*$":
     type: object
-    $ref: "/schemas/extcon/extcon-usbc-cros-ec.yaml#"
+    $ref: /schemas/extcon/extcon-usbc-cros-ec.yaml#
 
 required:
   - compatible
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - google,cros-ec-i2c
-          - google,cros-ec-rpmsg
-then:
-  properties:
-    google,cros-ec-spi-pre-delay: false
-    google,cros-ec-spi-msg-delay: false
-    spi-max-frequency: false
+allOf:
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: google,cros-ec-spi
+    then:
+      properties:
+        controller-data: false
+        google,cros-ec-spi-pre-delay: false
+        google,cros-ec-spi-msg-delay: false
+        spi-max-frequency: false
+    else:
+      $ref: /schemas/spi/spi-peripheral-props.yaml
+
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              const: google,cros-ec-rpmsg
+    then:
+      properties:
+        mediatek,rpmsg-name: false
+
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - google,cros-ec-rpmsg
+                - google,cros-ec-uart
+    then:
+      required:
+        - reg
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: google,cros-ec-fp
+    then:
+      properties:
+        '#address-cells': false
+        '#size-cells': false
+        typec: false
+        ec-pwm: false
+        kbd-led-backlight: false
+        keyboard-controller: false
+        proximity: false
+        codecs: false
+        cbas: false
+
+      patternProperties:
+        "^i2c-tunnel[0-9]*$": false
+        "^regulator@[0-9]+$": false
+        "^extcon[0-9]*$": false
+
+      # Using additionalProperties: false here and
+      # listing true properties doesn't work
+
+      required:
+        - reset-gpios
+        - boot0-gpios
+        - vdd-supply
+    else:
+      properties:
+        reset-gpios: false
+        boot0-gpios: false
+        vdd-supply: false
 
 additionalProperties: false
 
@@ -170,7 +246,7 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -187,7 +263,7 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -201,7 +277,7 @@ examples:
             spi-max-frequency = <5000000>;
 
             proximity {
-                    compatible = "google,cros-ec-mkbp-proximity";
+                compatible = "google,cros-ec-mkbp-proximity";
             };
 
             cbas {
@@ -217,4 +293,30 @@ examples:
             compatible = "google,cros-ec-rpmsg";
         };
     };
+
+  # Example for FPMCU
+  - |
+    spi {
+      #address-cells = <0x1>;
+      #size-cells = <0x0>;
+
+      ec@0 {
+        compatible = "google,cros-ec-fp", "google,cros-ec-spi";
+        reg = <0x0>;
+        interrupt-parent = <&gpio_controller>;
+        interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+        spi-max-frequency = <3000000>;
+        reset-gpios = <&gpio_controller 5 GPIO_ACTIVE_LOW>;
+        boot0-gpios = <&gpio_controller 10 GPIO_ACTIVE_HIGH>;
+        vdd-supply = <&pp3300_fp_mcu>;
+      };
+    };
+
+  # Example for UART
+  - |
+    serial {
+        cros-ec {
+            compatible = "google,cros-ec-uart";
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
index 22edcb4b212f..bdff5b653453 100644
--- a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
@@ -53,7 +53,7 @@ properties:
       '^ldo[0-9]+$':
         type: object
 
-        $ref: "/schemas/regulator/regulator.yaml#"
+        $ref: /schemas/regulator/regulator.yaml#
 
         unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
index a3b976f101e8..084960fd5a1f 100644
--- a/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
+++ b/Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mfd/khadas,mcu.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Khadas on-board Microcontroller Device Tree Bindings
+title: Khadas on-board Microcontroller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
 
 description: |
   Khadas embeds a microcontroller on their VIM and Edge boards adding some
diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt
deleted file mode 100644
index 92070b346756..000000000000
--- a/Documentation/devicetree/bindings/mfd/max14577.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Maxim MAX14577/77836 Multi-Function Device
-
-MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+
-Battery Charger and SFOUT LDO output for powering USB devices. It is
-interfaced to host controller using I2C.
-
-MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
-For the description of Fuel Gauge low SOC alert interrupt see:
-../power/supply/max17040_battery.txt
-
-
-Required properties:
-- compatible : Must be "maxim,max14577" or "maxim,max77836".
-- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
-- interrupts : IRQ line for the chip.
-
-
-Required nodes:
- - charger :
-	Node for configuring the charger driver.
-	Required properties:
-		- compatible : "maxim,max14577-charger"
-			or "maxim,max77836-charger"
-		- maxim,fast-charge-uamp : Current in uA for Fast Charge;
-			Valid values:
-			- for max14577: 90000 - 950000;
-			- for max77836: 45000 - 475000;
-		- maxim,eoc-uamp : Current in uA for End-Of-Charge mode;
-			Valid values:
-			- for max14577: 50000 - 200000;
-			- for max77836: 5000 - 100000;
-		- maxim,ovp-uvolt : OverVoltage Protection Threshold in uV;
-			In an overvoltage condition, INT asserts and charging
-			stops. Valid values:
-			- 6000000, 6500000, 7000000, 7500000;
-		- maxim,constant-uvolt : Battery Constant Voltage in uV;
-			Valid values:
-			- 4000000 - 4280000 (step by 20000);
-			- 4350000;
-
-
-Optional nodes:
-- max14577-muic/max77836-muic :
-	Node used only by extcon consumers.
-	Required properties:
-		- compatible : "maxim,max14577-muic" or "maxim,max77836-muic"
-
-- regulators :
-	Required properties:
-		- compatible : "maxim,max14577-regulator"
-			or "maxim,max77836-regulator"
-
-	May contain a sub-node per regulator from the list below. Each
-	sub-node should contain the constraints and initialization information
-	for that regulator. See regulator.txt for a description of standard
-	properties for these sub-nodes.
-
-	List of valid regulator names:
-	- for max14577: CHARGER, SAFEOUT.
-	- for max77836: CHARGER, SAFEOUT, LDO1, LDO2.
-
-	The SAFEOUT is a fixed voltage regulator so there is no need to specify
-	voltages for it.
-
-
-Example:
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-max14577@25 {
-	compatible = "maxim,max14577";
-	reg = <0x25>;
-	interrupt-parent = <&gpx1>;
-	interrupts = <5 IRQ_TYPE_NONE>;
-
-	muic: max14577-muic {
-		compatible = "maxim,max14577-muic";
-	};
-
-	regulators {
-		compatible = "maxim,max14577-regulator";
-
-		SAFEOUT {
-			regulator-name = "SAFEOUT";
-		};
-		CHARGER {
-			regulator-name = "CHARGER";
-			regulator-min-microamp = <90000>;
-			regulator-max-microamp = <950000>;
-			regulator-boot-on;
-		};
-	};
-
-	charger {
-		compatible = "maxim,max14577-charger";
-
-		maxim,constant-uvolt = <4350000>;
-		maxim,fast-charge-uamp = <450000>;
-		maxim,eoc-uamp = <50000>;
-		maxim,ovp-uvolt = <6500000>;
-	};
-};
-
-
-max77836@25 {
-	compatible = "maxim,max77836";
-	reg = <0x25>;
-	interrupt-parent = <&gpx1>;
-	interrupts = <5 IRQ_TYPE_NONE>;
-
-	muic: max77836-muic {
-		compatible = "maxim,max77836-muic";
-	};
-
-	regulators {
-		compatible = "maxim,max77836-regulator";
-
-		SAFEOUT {
-			regulator-name = "SAFEOUT";
-		};
-		CHARGER {
-			regulator-name = "CHARGER";
-			regulator-min-microamp = <90000>;
-			regulator-max-microamp = <950000>;
-			regulator-boot-on;
-		};
-		LDO1 {
-			regulator-name = "LDO1";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-		LDO2 {
-			regulator-name = "LDO2";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <3950000>;
-		};
-	};
-
-	charger {
-		compatible = "maxim,max77836-charger";
-
-		maxim,constant-uvolt = <4350000>;
-		maxim,fast-charge-uamp = <225000>;
-		maxim,eoc-uamp = <7500>;
-		maxim,ovp-uvolt = <6500000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml
index b0a0f0d3d9d4..4181174fcf58 100644
--- a/Documentation/devicetree/bindings/mfd/max77650.yaml
+++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
@@ -100,14 +100,12 @@ examples:
                 compatible = "maxim,max77650-regulator";
 
                 max77650_ldo: regulator-ldo {
-                    regulator-compatible = "ldo";
                     regulator-name = "max77650-ldo";
                     regulator-min-microvolt = <1350000>;
                     regulator-max-microvolt = <2937500>;
                 };
 
                 max77650_sbb0: regulator-sbb0 {
-                    regulator-compatible = "sbb0";
                     regulator-name = "max77650-sbb0";
                     regulator-min-microvolt = <800000>;
                     regulator-max-microvolt = <1587500>;
diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt
deleted file mode 100644
index 42968b7144e0..000000000000
--- a/Documentation/devicetree/bindings/mfd/max77686.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Maxim MAX77686 multi-function device
-
-MAX77686 is a Multifunction device with PMIC, RTC and Charger on chip. It is
-interfaced to host controller using i2c interface. PMIC and Charger submodules
-are addressed using same i2c slave address whereas RTC submodule uses
-different i2c slave address,presently for which we are statically creating i2c
-client while probing.This document describes the binding for mfd device and
-PMIC submodule.
-
-Bindings for the built-in 32k clock generator block and
-regulators are defined in ../clk/maxim,max77686.txt and
-../regulator/max77686.txt respectively.
-
-Required properties:
-- compatible : Must be "maxim,max77686";
-- reg : Specifies the i2c slave address of PMIC block.
-- interrupts : This i2c device has an IRQ line connected to the main SoC.
-
-Example:
-
-	max77686: pmic@9 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&wakeup_eint>;
-		interrupts = <26 0>;
-		reg = <0x09>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt
deleted file mode 100644
index 0ced96e16c16..000000000000
--- a/Documentation/devicetree/bindings/mfd/max77693.txt
+++ /dev/null
@@ -1,194 +0,0 @@
-Maxim MAX77693 multi-function device
-
-MAX77693 is a Multifunction device with the following submodules:
-- PMIC,
-- CHARGER,
-- LED,
-- MUIC,
-- HAPTIC
-
-It is interfaced to host controller using i2c.
-This document describes the bindings for the mfd device.
-
-Required properties:
-- compatible : Must be "maxim,max77693".
-- reg : Specifies the i2c slave address of PMIC block.
-- interrupts : This i2c device has an IRQ line connected to the main SoC.
-
-Optional properties:
-- regulators : The regulators of max77693 have to be instantiated under subnode
-  named "regulators" using the following format.
-
-	regulators {
-		regulator-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER
-		standard regulator constraints[*].
-	};
-
-	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
-
-- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide
-  users with tactile feedback. PWM period and duty-cycle are varied in
-  order to provide the appropriate level of feedback.
-
- Required properties:
-	- compatible : Must be "maxim,max77693-haptic"
-	- haptic-supply : power supply for the haptic motor
-	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
-	- pwms : phandle to the physical PWM(Pulse Width Modulation) device.
-	 PWM properties should be named "pwms". And number of cell is different
-	 for each pwm device.
-	 To get more information, please refer to documentation.
-	[*] refer Documentation/devicetree/bindings/pwm/pwm.txt
-
-- charger : Node configuring the charger driver.
-  If present, required properties:
-  - compatible : Must be "maxim,max77693-charger".
-
-  Optional properties (if not set, defaults will be used):
-  - maxim,constant-microvolt : Battery constant voltage in uV. The charger
-    will operate in fast charge constant current mode till battery voltage
-    reaches this level. Then the charger will switch to fast charge constant
-    voltage mode. Also vsys (system voltage) will be set to this value when
-    DC power is supplied but charger is not enabled.
-    Valid values: 3650000 - 4400000, step by 25000 (rounded down)
-    Default: 4200000
-
-  - maxim,min-system-microvolt : Minimal system voltage in uV.
-    Valid values: 3000000 - 3700000, step by 100000 (rounded down)
-    Default: 3600000
-
-  - maxim,thermal-regulation-celsius : Temperature in Celsius for entering
-    high temperature charging mode. If die temperature exceeds this value
-    the charging current will be reduced by 105 mA/Celsius.
-    Valid values: 70, 85, 100, 115
-    Default: 100
-
-  - maxim,battery-overcurrent-microamp : Overcurrent protection threshold
-    in uA (current from battery to system).
-    Valid values: 2000000 - 3500000, step by 250000 (rounded down)
-    Default: 3500000
-
-  - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for
-    triggering input voltage regulation loop. If input voltage decreases
-    below this value, the input current will be reduced to reach the
-    threshold voltage.
-    Valid values: 4300000, 4700000, 4800000, 4900000
-    Default: 4300000
-
-- led : the LED submodule device node
-
-There are two LED outputs available - FLED1 and FLED2. Each of them can
-control a separate LED or they can be connected together to double
-the maximum current for a single connected LED. One LED is represented
-by one child node.
-
-Required properties:
-- compatible : Must be "maxim,max77693-led".
-
-Optional properties:
-- maxim,boost-mode :
-	In boost mode the device can produce up to 1.2A of total current
-	on both outputs. The maximum current on each output is reduced
-	to 625mA then. If not enabled explicitly, boost setting defaults to
-	LEDS_BOOST_FIXED in case both current sources are used.
-	Possible values:
-		LEDS_BOOST_OFF (0) - no boost,
-		LEDS_BOOST_ADAPTIVE (1) - adaptive mode,
-		LEDS_BOOST_FIXED (2) - fixed mode.
-- maxim,boost-mvout : Output voltage of the boost module in millivolts.
-	Valid values: 3300 - 5500, step by 25 (rounded down)
-	Default: 3300
-- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired
-	if chip estimates that system voltage could drop below this level due
-	to flash power consumption.
-	Valid values: 2400 - 3400, step by 33 (rounded down)
-	Default: 2400
-
-Required properties for the LED child node:
-- led-sources : see Documentation/devicetree/bindings/leds/common.txt;
-		device current output identifiers: 0 - FLED1, 1 - FLED2
-- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-	Valid values for a LED connected to one FLED output:
-		15625 - 250000, step by 15625 (rounded down)
-	Valid values for a LED connected to both FLED outputs:
-		15625 - 500000, step by 15625 (rounded down)
-- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-	Valid values for a single LED connected to one FLED output
-	(boost mode must be turned off):
-		15625 - 1000000, step by 15625 (rounded down)
-	Valid values for a single LED connected to both FLED outputs:
-		15625 - 1250000, step by 15625 (rounded down)
-	Valid values for two LEDs case:
-		15625 - 625000, step by 15625 (rounded down)
-- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
-	Valid values: 62500 - 1000000, step by 62500 (rounded down)
-
-Optional properties for the LED child node:
-- label : see Documentation/devicetree/bindings/leds/common.txt
-
-Optional nodes:
-- max77693-muic :
-	Node used only by extcon consumers.
-	Required properties:
-		- compatible : "maxim,max77693-muic"
-
-Example:
-#include <dt-bindings/leds/common.h>
-
-	max77693@66 {
-		compatible = "maxim,max77693";
-		reg = <0x66>;
-		interrupt-parent = <&gpx1>;
-		interrupts = <5 2>;
-
-		regulators {
-			esafeout@1 {
-				regulator-compatible = "ESAFEOUT1";
-				regulator-name = "ESAFEOUT1";
-				regulator-boot-on;
-			};
-			esafeout@2 {
-				regulator-compatible = "ESAFEOUT2";
-				regulator-name = "ESAFEOUT2";
-				};
-			charger@0 {
-				regulator-compatible = "CHARGER";
-				regulator-name = "CHARGER";
-				regulator-min-microamp = <60000>;
-				regulator-max-microamp = <2580000>;
-					regulator-boot-on;
-			};
-		};
-
-		haptic {
-			compatible = "maxim,max77693-haptic";
-			haptic-supply = <&haptic_supply>;
-			pwms = <&pwm 0 40000 0>;
-			pwm-names = "haptic";
-		};
-
-		charger {
-			compatible = "maxim,max77693-charger";
-
-			maxim,constant-microvolt = <4200000>;
-			maxim,min-system-microvolt = <3600000>;
-			maxim,thermal-regulation-celsius = <75>;
-			maxim,battery-overcurrent-microamp = <3000000>;
-			maxim,charge-input-threshold-microvolt = <4300000>;
-		};
-
-		led {
-			compatible = "maxim,max77693-led";
-			maxim,boost-mode = <LEDS_BOOST_FIXED>;
-			maxim,boost-mvout = <5000>;
-			maxim,mvsys-min = <2400>;
-
-			camera_flash: flash-led {
-				label = "max77693-flash";
-				led-sources = <0>, <1>;
-				led-max-microamp = <500000>;
-				flash-max-microamp = <1250000>;
-				flash-max-timeout-us = <1000000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt
deleted file mode 100644
index 09decac20d91..000000000000
--- a/Documentation/devicetree/bindings/mfd/max77802.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Maxim MAX77802 multi-function device
-
-The Maxim MAX77802 is a Power Management IC (PMIC) that contains 10 high
-efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power
-up application processors and peripherals, a 2-channel 32kHz clock outputs,
-a Real-Time-Clock (RTC) and a I2C interface to program the individual
-regulators, clocks outputs and the RTC.
-
-Bindings for the built-in 32k clock generator block and
-regulators are defined in ../clk/maxim,max77802.txt and
-../regulator/max77802.txt respectively.
-
-Required properties:
-- compatible		: Must be "maxim,max77802"
-- reg			: Specifies the I2C slave address of PMIC block.
-- interrupts		: I2C device IRQ line connected to the main SoC.
-
-Example:
-
-	max77802: pmic@9 {
-		compatible = "maxim,max77802";
-		interrupt-parent = <&intc>;
-		interrupts = <26 IRQ_TYPE_NONE>;
-		reg = <0x09>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
new file mode 100644
index 000000000000..995e96ee7445
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX14577 is a MicroUSB and Companion Power Management IC which
+  includes voltage safeout regulators, charger and MicroUSB management IC.
+
+  The Maxim MAX77836 is a MicroUSB and Companion Power Management IC which
+  includes voltage safeout and LDO regulators, charger, fuel-gauge and MicroUSB
+  management IC.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577
+      - maxim,max77836
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  charger:
+    $ref: /schemas/power/supply/maxim,max14577.yaml
+
+  extcon:
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        enum:
+          - maxim,max14577-muic
+          - maxim,max77836-muic
+
+    required:
+      - compatible
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max14577.yaml
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - charger
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577
+    then:
+      properties:
+        charger:
+          properties:
+            compatible:
+              const: maxim,max14577-charger
+        extcon:
+          properties:
+            compatible:
+              const: maxim,max14577-muic
+        regulator:
+          properties:
+            compatible:
+              const: maxim,max14577-regulator
+    else:
+      properties:
+        charger:
+          properties:
+            compatible:
+              const: maxim,max77836-charger
+        extcon:
+          properties:
+            compatible:
+              const: maxim,max77836-muic
+        regulator:
+          properties:
+            compatible:
+              const: maxim,max77836-regulator
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@25 {
+            compatible = "maxim,max14577";
+            reg = <0x25>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+            extcon {
+                compatible = "maxim,max14577-muic";
+            };
+
+            regulators {
+                compatible = "maxim,max14577-regulator";
+
+                SAFEOUT {
+                    regulator-name = "SAFEOUT";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <90000>;
+                    regulator-max-microamp = <950000>;
+                    regulator-boot-on;
+                };
+            };
+
+            charger {
+                compatible = "maxim,max14577-charger";
+
+                maxim,constant-uvolt = <4350000>;
+                maxim,fast-charge-uamp = <450000>;
+                maxim,eoc-uamp = <50000>;
+                maxim,ovp-uvolt = <6500000>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@25 {
+            compatible = "maxim,max77836";
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_NONE>;
+            reg = <0x25>;
+            wakeup-source;
+
+            extcon {
+                compatible = "maxim,max77836-muic";
+            };
+
+            regulators {
+                compatible = "maxim,max77836-regulator";
+
+                SAFEOUT {
+                    regulator-name = "SAFEOUT";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <45000>;
+                    regulator-max-microamp = <475000>;
+                    regulator-boot-on;
+                };
+
+                LDO1 {
+                    regulator-name = "MOT_2.7V";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <2700000>;
+                };
+
+                LDO2 {
+                    regulator-name = "UNUSED_LDO2";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <3950000>;
+                };
+            };
+
+            charger {
+                compatible = "maxim,max77836-charger";
+
+                maxim,constant-uvolt = <4350000>;
+                maxim,fast-charge-uamp = <225000>;
+                maxim,eoc-uamp = <7500>;
+                maxim,ovp-uvolt = <6500000>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml b/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml
new file mode 100644
index 000000000000..da67742c5aa9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max5970.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max5970.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator for MAX5970 Smart Switch from Maxim Integrated
+
+maintainers:
+  - Patrick Rudolph <patrick.rudolph@9elements.com>
+
+description: |
+  The smart switch provides no output regulation, but independent fault protection
+  and voltage and current sensing.
+  Programming is done through I2C bus.
+
+  Datasheets:
+    https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
+    https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
+
+properties:
+  compatible:
+    enum:
+      - maxim,max5970
+      - maxim,max5978
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  leds:
+    type: object
+    description:
+      Properties for four LEDS.
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-3]$":
+        $ref: /schemas/leds/common.yaml#
+        type: object
+
+    additionalProperties: false
+
+  vss1-supply:
+    description: Supply of the first channel.
+
+  vss2-supply:
+    description: Supply of the second channel.
+
+  regulators:
+    type: object
+    description:
+      Properties for both hot swap control/switch.
+
+    patternProperties:
+      "^sw[0-1]$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        properties:
+          shunt-resistor-micro-ohms:
+            description: |
+              The value of current sense resistor in microohms.
+
+        required:
+          - shunt-resistor-micro-ohms
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+  - vss1-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - maxim,max5970
+    then:
+      required:
+        - vss2-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        regulator@3a {
+            compatible = "maxim,max5978";
+            reg = <0x3a>;
+            vss1-supply = <&p3v3>;
+
+            regulators {
+                sw0_ref_0: sw0 {
+                    shunt-resistor-micro-ohms = <12000>;
+                };
+            };
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                led@0 {
+                    reg = <0>;
+                    label = "led0";
+                    default-state = "on";
+                };
+                led@1 {
+                    reg = <1>;
+                    label = "led1";
+                    default-state = "on";
+                };
+            };
+        };
+    };
+
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@3a {
+            compatible = "maxim,max5970";
+            reg = <0x3a>;
+            vss1-supply = <&p3v3>;
+            vss2-supply = <&p5v>;
+
+            regulators {
+                sw0_ref_1: sw0 {
+                    shunt-resistor-micro-ohms = <12000>;
+                };
+                sw1_ref_1: sw1 {
+                    shunt-resistor-micro-ohms = <10000>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml
new file mode 100644
index 000000000000..d027aabe453b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77686.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77686 Power Management IC
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77686 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77686 is a Power Management IC which includes voltage and
+  current regulators, RTC and clock outputs.
+
+  The MAX77686 provides three 32.768khz clock outputs that can be controlled
+  (gated/ungated) over I2C.  The clock IDs are defined as preprocessor macros
+  in dt-bindings/clock/maxim,max77686.h.
+
+properties:
+  compatible:
+    const: maxim,max77686
+
+  '#clock-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  voltage-regulators:
+    $ref: ../regulator/maxim,max77686.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        max77686: pmic@9 {
+            compatible = "maxim,max77686";
+            reg = <0x09>;
+
+            interrupt-parent = <&gpx0>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-0 = <&max77686_irq>;
+            pinctrl-names = "default";
+            wakeup-source;
+            #clock-cells = <1>;
+
+            voltage-regulators {
+                LDO1 {
+                    regulator-name = "VALIVE_1.0V_AP";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                };
+
+                LDO2 {
+                    regulator-name = "VM1M2_1.2V_AP";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <1200000>;
+                    regulator-always-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                // ...
+
+                LDO22 {
+                    regulator-name = "VMEM_VDD_2.8V";
+                    regulator-min-microvolt = <2800000>;
+                    regulator-max-microvolt = <2800000>;
+                    maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "VDD_MIF";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK2 {
+                    regulator-name = "VDD_ARM";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                // ...
+
+                BUCK9 {
+                    regulator-name = "CAM_ISP_CORE_1.2V";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1200000>;
+                    maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
new file mode 100644
index 000000000000..1b06a77ec798
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77693 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX77693 is a MicroUSB and Companion Power Management IC which
+  includes voltage current regulators, charger, LED/flash, haptic motor driver
+  and MicroUSB management IC.
+
+properties:
+  compatible:
+    const: maxim,max77693
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  charger:
+    $ref: /schemas/power/supply/maxim,max77693.yaml
+
+  led:
+    $ref: /schemas/leds/maxim,max77693.yaml
+
+  max77693-muic:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: maxim,max77693-muic
+
+    required:
+      - compatible
+
+  motor-driver:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: maxim,max77693-haptic
+
+      haptic-supply:
+        description: Power supply to the haptic motor
+
+      pwms:
+        maxItems: 1
+
+    required:
+      - compatible
+      - haptic-supply
+      - pwms
+
+  regulators:
+    $ref: ../regulator/maxim,max77693.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "maxim,max77693";
+            reg = <0x66>;
+            interrupt-parent = <&gpx1>;
+            interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                ESAFEOUT1 {
+                    regulator-name = "ESAFEOUT1";
+                };
+
+                ESAFEOUT2 {
+                    regulator-name = "ESAFEOUT2";
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <60000>;
+                    regulator-max-microamp = <2580000>;
+                };
+            };
+
+            motor-driver {
+                compatible = "maxim,max77693-haptic";
+                haptic-supply = <&ldo26_reg>;
+                pwms = <&pwm 0 38022 0>;
+            };
+
+            charger {
+                compatible = "maxim,max77693-charger";
+
+                maxim,constant-microvolt = <4350000>;
+                maxim,min-system-microvolt = <3600000>;
+                maxim,thermal-regulation-celsius = <100>;
+                maxim,battery-overcurrent-microamp = <3500000>;
+                maxim,charge-input-threshold-microvolt = <4300000>;
+            };
+
+            led {
+                compatible = "maxim,max77693-led";
+                maxim,boost-mode = <LEDS_BOOST_FIXED>;
+                maxim,boost-mvout = <5000>;
+                maxim,mvsys-min = <2400>;
+
+                flash-led {
+                    label = "max77693-flash";
+                    function = LED_FUNCTION_FLASH;
+                    color = <LED_COLOR_ID_WHITE>;
+                    led-sources = <0>, <1>;
+                    led-max-microamp = <500000>;
+                    flash-max-microamp = <1250000>;
+                    flash-max-timeout-us = <1000000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
new file mode 100644
index 000000000000..edac14af101e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77714.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated.
+
+maintainers:
+  - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+description: |
+  MAX77714 is a Power Management IC with 4 buck regulators, 9
+  low-dropout regulators, 8 GPIOs, RTC and watchdog.
+
+properties:
+  compatible:
+    const: maxim,max77714
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger type.
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^(buck[0-3]|ldo[0-8])$':
+        type: object
+        unevaluatedProperties: false
+        $ref: /schemas/regulator/regulator.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@1c {
+            compatible = "maxim,max77714";
+            reg = <0x1c>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
new file mode 100644
index 000000000000..ad2013900b03
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77802.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77802 Power Management IC
+
+maintainers:
+  - Javier Martinez Canillas <javier@dowhile0.org>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77802 Power Management
+  Integrated Circuit (PMIC).
+
+  The Maxim MAX77802 is a Power Management IC which includes voltage and
+  current regulators (10 high efficiency Buck regulators and 32 Low-DropOut
+  (LDO)), RTC and clock outputs.
+
+  The MAX77802 provides two 32.768khz clock outputs that can be controlled
+  (gated/ungated) over I2C.  The clock IDs are defined as preprocessor macros
+  in dt-bindings/clock/maxim,max77802.h.
+
+properties:
+  compatible:
+    const: maxim,max77802
+
+  '#clock-cells':
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max77802.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  inb1-supply:
+    description: Power supply for buck1
+  inb2-supply:
+    description: Power supply for buck2
+  inb3-supply:
+    description: Power supply for buck3
+  inb4-supply:
+    description: Power supply for buck4
+  inb5-supply:
+    description: Power supply for buck5
+  inb6-supply:
+    description: Power supply for buck6
+  inb7-supply:
+    description: Power supply for buck7
+  inb8-supply:
+    description: Power supply for buck8
+  inb9-supply:
+    description: Power supply for buck9
+  inb10-supply:
+    description: Power supply for buck10
+
+  inl1-supply:
+    description: Power supply for LDO8, LDO15
+  inl2-supply:
+    description: Power supply for LDO17, LDO27, LDO30, LDO35
+  inl3-supply:
+    description: Power supply for LDO3, LDO5, LDO7, LDO7
+  inl4-supply:
+    description: Power supply for LDO10, LDO11, LDO13, LDO14
+  inl5-supply:
+    description: Power supply for LDO9, LDO19
+  inl6-supply:
+    description: Power supply for LDO4, LDO21, LDO24, LDO33
+  inl7-supply:
+    description: Power supply for LDO18, LDO20, LDO28, LDO29
+  inl9-supply:
+    description: Power supply for LDO12, LDO23, LDO25, LDO26, LDO32, LDO34
+  inl10-supply:
+    description: Power supply for LDO1, LDO2
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - '#clock-cells'
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/maxim,max77802.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@9 {
+            compatible = "maxim,max77802";
+            interrupt-parent = <&gpx3>;
+            interrupts = <1 IRQ_TYPE_NONE>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
+                        <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+            wakeup-source;
+            reg = <0x9>;
+            #clock-cells = <1>;
+
+            inb1-supply = <&tps65090_dcdc2>;
+            inb2-supply = <&tps65090_dcdc1>;
+            inb3-supply = <&tps65090_dcdc2>;
+            inb4-supply = <&tps65090_dcdc2>;
+            inb5-supply = <&tps65090_dcdc1>;
+            inb6-supply = <&tps65090_dcdc2>;
+            inb7-supply = <&tps65090_dcdc1>;
+            inb8-supply = <&tps65090_dcdc1>;
+            inb9-supply = <&tps65090_dcdc1>;
+            inb10-supply = <&tps65090_dcdc1>;
+
+            inl1-supply = <&buck5_reg>;
+            inl2-supply = <&buck7_reg>;
+            inl3-supply = <&buck9_reg>;
+            inl4-supply = <&buck9_reg>;
+            inl5-supply = <&buck9_reg>;
+            inl6-supply = <&tps65090_dcdc2>;
+            inl7-supply = <&buck9_reg>;
+            inl9-supply = <&tps65090_dcdc2>;
+            inl10-supply = <&buck7_reg>;
+
+            regulators {
+                BUCK1 {
+                    regulator-name = "vdd_mif";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-ramp-delay = <12500>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-ramp-delay = <12500>;
+                    regulator-coupled-with = <&buck3_reg>;
+                    regulator-coupled-max-spread = <300000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ...
+
+                BUCK10 {
+                    regulator-name = "vdd_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                LDO1 {
+                    regulator-name = "vdd_1v0";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                    regulator-initial-mode = <MAX77802_OPMODE_NORMAL>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-mode = <MAX77802_OPMODE_LP>;
+                    };
+                };
+
+                // ...
+
+                LDO35 {
+                    regulator-name = "ldo_35";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <1200000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
new file mode 100644
index 000000000000..2e2a2a86b57d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max77843.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77843 MicroUSB and Companion Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX77843 MicroUSB
+  Integrated Circuit (MUIC).
+
+  The Maxim MAX77843 is a MicroUSB and Companion Power Management IC which
+  includes voltage current regulators, charger, fuel-gauge, haptic motor driver
+  and MicroUSB management IC.
+
+properties:
+  compatible:
+    const: maxim,max77843
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  extcon:
+    $ref: /schemas/extcon/maxim,max77843.yaml
+
+  motor-driver:
+    type: object
+    additionalProperties: false
+    properties:
+      compatible:
+        const: maxim,max77843-haptic
+
+      haptic-supply:
+        description: Power supply to the haptic motor
+
+      pwms:
+        maxItems: 1
+
+    required:
+      - compatible
+      - haptic-supply
+      - pwms
+
+  regulators:
+    $ref: /schemas/regulator/maxim,max77843.yaml
+
+required:
+  - compatible
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "maxim,max77843";
+            interrupt-parent = <&gpa1>;
+            interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+            reg = <0x66>;
+
+            extcon {
+                compatible = "maxim,max77843-muic";
+
+                connector {
+                    compatible = "samsung,usb-connector-11pin",
+                                 "usb-b-connector";
+                    label = "micro-USB";
+                    type = "micro";
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            /*
+                             * TODO: The DTS this is based on does not have
+                             * port@0 which is a required property. The ports
+                             * look incomplete and need fixing.
+                             * Add a disabled port just to satisfy dtschema.
+                             */
+                            reg = <0>;
+                            status = "disabled";
+                        };
+
+                        port@3 {
+                            reg = <3>;
+                            endpoint {
+                                remote-endpoint = <&mhl_to_musb_con>;
+                            };
+                        };
+                    };
+                };
+
+                ports {
+                    port {
+                        endpoint {
+                            remote-endpoint = <&usb_to_muic>;
+                        };
+                    };
+                };
+            };
+
+            regulators {
+                compatible = "maxim,max77843-regulator";
+
+                SAFEOUT1 {
+                    regulator-name = "SAFEOUT1";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <4950000>;
+                };
+
+                SAFEOUT2 {
+                    regulator-name = "SAFEOUT2";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <4950000>;
+                };
+
+                CHARGER {
+                    regulator-name = "CHARGER";
+                    regulator-min-microamp = <100000>;
+                    regulator-max-microamp = <3150000>;
+                };
+            };
+
+            motor-driver {
+                compatible = "maxim,max77843-haptic";
+                haptic-supply = <&ldo38_reg>;
+                pwms = <&pwm 0 33670 0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
new file mode 100644
index 000000000000..fc2a53148e1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt6357.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6357 PMIC
+
+maintainers:
+  - Flora Fu <flora.fu@mediatek.com>
+  - Alexandre Mergnat <amergnat@baylibre.com>
+
+description: |
+  MT6357 is a power management system chip containing 5 buck
+  converters and 29 LDOs. Supported features are audio codec,
+  USB battery charging, fuel gauge, RTC
+
+  This is a multifunction device with the following sub modules:
+  - Regulator
+  - RTC
+  - Keys
+
+  It is interfaced to host controller using SPI interface by a proprietary hardware
+  called PMIC wrapper or pwrap. This MFD is a child device of pwrap.
+  See the following for pwrap node definitions:
+  Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
+
+properties:
+  compatible:
+    const: mediatek,mt6357
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  regulators:
+    type: object
+    $ref: /schemas/regulator/mediatek,mt6357-regulator.yaml
+    description:
+      List of MT6357 BUCKs and LDOs regulators.
+
+  rtc:
+    type: object
+    $ref: /schemas/rtc/rtc.yaml#
+    unevaluatedProperties: false
+    description:
+      MT6357 Real Time Clock.
+    properties:
+      compatible:
+        const: mediatek,mt6357-rtc
+      start-year: true
+    required:
+      - compatible
+
+  keys:
+    type: object
+    $ref: /schemas/input/mediatek,pmic-keys.yaml
+    description:
+      MT6357 power and home keys.
+
+required:
+  - compatible
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pwrap {
+        pmic {
+            compatible = "mediatek,mt6357";
+
+            interrupt-parent = <&pio>;
+            interrupts = <145 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+
+            regulators {
+                mt6357_vproc_reg: buck-vproc {
+                    regulator-name = "vproc";
+                    regulator-min-microvolt = <518750>;
+                    regulator-max-microvolt = <1312500>;
+                    regulator-ramp-delay = <6250>;
+                    regulator-enable-ramp-delay = <220>;
+                    regulator-always-on;
+                };
+
+                // ...
+
+                mt6357_vusb33_reg: ldo-vusb33 {
+                    regulator-name = "vusb33";
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3100000>;
+                    regulator-enable-ramp-delay = <264>;
+                };
+            };
+
+            rtc {
+                compatible = "mediatek,mt6357-rtc";
+            };
+
+            keys {
+                compatible = "mediatek,mt6357-keys";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
new file mode 100644
index 000000000000..fb65abf30d57
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml
@@ -0,0 +1,247 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt6360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6360 PMIC from MediaTek Integrated
+
+maintainers:
+  - Gene Chen <gene_chen@richtek.com>
+
+description: |
+  MT6360 is a PMIC device with the following sub modules.
+  It is interfaced to host controller using I2C interface.
+
+  This document describes the binding for PMIC device and its sub module.
+
+properties:
+  compatible:
+    const: mediatek,mt6360
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: IRQB
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+    description:
+      The first cell is the IRQ number.
+
+  regulators:
+    $ref: /schemas/regulator/mt6360-regulator.yaml#
+
+  charger:
+    $ref: /schemas/power/supply/mt6360_charger.yaml#
+
+  tcpc:
+    $ref: /schemas/usb/mediatek,mt6360-tcpc.yaml#
+
+  led-controller:
+    $ref: /schemas/leds/leds-mt6360.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+    #include <dt-bindings/leds/common.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@34 {
+            compatible = "mediatek,mt6360";
+            reg = <0x34>;
+            wakeup-source;
+            interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-names = "IRQB";
+            interrupt-controller;
+            #interrupt-cells = <1>;
+
+            mt6360_charger: charger {
+                compatible = "mediatek,mt6360-chg";
+                richtek,vinovp-microvolt = <14500000>;
+
+                otg_vbus_regulator: usb-otg-vbus-regulator {
+                    regulator-name = "usb-otg-vbus";
+                    regulator-min-microvolt = <4425000>;
+                    regulator-max-microvolt = <5825000>;
+                };
+            };
+
+            led-controller {
+                compatible = "mediatek,mt6360-led";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                multi-led@0 {
+                    reg = <0>;
+                    function = LED_FUNCTION_INDICATOR;
+                    color = <LED_COLOR_ID_RGB>;
+                    led-max-microamp = <24000>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    led@0 {
+                        reg = <0>;
+                        color = <LED_COLOR_ID_RED>;
+                    };
+                    led@1 {
+                        reg = <1>;
+                        color = <LED_COLOR_ID_GREEN>;
+                    };
+                    led@2 {
+                        reg = <2>;
+                        color = <LED_COLOR_ID_BLUE>;
+                    };
+                };
+                led@3 {
+                    reg = <3>;
+                    function = LED_FUNCTION_INDICATOR;
+                    color = <LED_COLOR_ID_WHITE>;
+                    led-max-microamp = <150000>;
+                };
+                led@4 {
+                    reg = <4>;
+                    function = LED_FUNCTION_FLASH;
+                    color = <LED_COLOR_ID_WHITE>;
+                    function-enumerator = <1>;
+                    led-max-microamp = <200000>;
+                    flash-max-microamp = <500000>;
+                    flash-max-timeout-us = <1024000>;
+                };
+                led@5 {
+                    reg = <5>;
+                    function = LED_FUNCTION_FLASH;
+                    color = <LED_COLOR_ID_WHITE>;
+                    function-enumerator = <2>;
+                    led-max-microamp = <200000>;
+                    flash-max-microamp = <500000>;
+                    flash-max-timeout-us = <1024000>;
+                };
+            };
+
+            regulators {
+                compatible = "mediatek,mt6360-regulator";
+                LDO_VIN3-supply = <&BUCK2>;
+                buck1 {
+                    regulator-name = "mt6360,buck1";
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP
+                         MT6360_OPMODE_ULP>;
+                };
+                BUCK2: buck2 {
+                    regulator-name = "mt6360,buck2";
+                    regulator-min-microvolt = <300000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP
+                         MT6360_OPMODE_ULP>;
+                };
+                ldo6 {
+                    regulator-name = "mt6360,ldo6";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2100000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo7 {
+                    regulator-name = "mt6360,ldo7";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <2100000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo1 {
+                    regulator-name = "mt6360,ldo1";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo2 {
+                    regulator-name = "mt6360,ldo2";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo3 {
+                    regulator-name = "mt6360,ldo3";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+                ldo5 {
+                    regulator-name = "mt6360,ldo5";
+                    regulator-min-microvolt = <2700000>;
+                    regulator-max-microvolt = <3600000>;
+                    regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+                         MT6360_OPMODE_LP>;
+                };
+            };
+
+            tcpc {
+                compatible = "mediatek,mt6360-tcpc";
+                interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+                interrupt-names = "PD_IRQB";
+
+                connector {
+                    compatible = "usb-c-connector";
+                    label = "USB-C";
+                    data-role = "dual";
+                    power-role = "dual";
+                    try-power-role = "sink";
+                    source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+                    sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+                    op-sink-microwatt = <10000000>;
+
+                    ports {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        port@0 {
+                            reg = <0>;
+                            endpoint {
+                                remote-endpoint = <&usb_hs>;
+                            };
+                        };
+                        port@1 {
+                            reg = <1>;
+                            endpoint {
+                                remote-endpoint = <&usb_ss>;
+                          };
+                        };
+                        port@2 {
+                            reg = <2>;
+                            endpoint {
+                                remote-endpoint = <&dp_aux>;
+                            };
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
new file mode 100644
index 000000000000..c9574b243046
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt6370.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 SubPMIC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  MT6370 is a highly-integrated smart power management IC, which includes a
+  single cell Li-Ion/Li-Polymer switching battery charger, a USB Type-C &
+  Power Delivery (PD) controller, dual flash LED current sources, a RGB LED
+  driver, a backlight WLED driver, a display bias driver and a general LDO for
+  portable devices.
+
+properties:
+  compatible:
+    const: mediatek,mt6370
+
+  reg:
+    maxItems: 1
+
+  wakeup-source: true
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  adc:
+    type: object
+    additionalProperties: false
+    description: |
+      Provides 9 channels for system monitoring, including VBUSDIV5 (lower
+      accuracy, higher measure range), VBUSDIV2 (higher accuracy, lower
+      measure range), VBAT, VSYS, CHG_VDDP, TS_BAT, IBUS, IBAT, and TEMP_JC.
+
+    properties:
+      compatible:
+        const: mediatek,mt6370-adc
+
+      "#io-channel-cells":
+        const: 1
+
+    required:
+      - compatible
+      - "#io-channel-cells"
+
+  backlight:
+    type: object
+    $ref: /schemas/leds/backlight/mediatek,mt6370-backlight.yaml#
+
+  charger:
+    type: object
+    $ref: /schemas/power/supply/mediatek,mt6370-charger.yaml#
+
+  tcpc:
+    type: object
+    $ref: /schemas/usb/mediatek,mt6370-tcpc.yaml#
+
+  indicator:
+    type: object
+    $ref: /schemas/leds/mediatek,mt6370-indicator.yaml#
+
+  flashlight:
+    type: object
+    $ref: /schemas/leds/mediatek,mt6370-flashlight.yaml#
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description: |
+      List all supported regulators, which support the control for DisplayBias
+      voltages and one general purpose LDO which commonly used to drive the
+      vibrator.
+
+    patternProperties:
+      "^(dsvbst|vibldo)$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+      "^(dsvpos|dsvneg)$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+        properties:
+          enable-gpios:
+            maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - regulators
+  - adc
+  - backlight
+  - indicator
+  - tcpc
+  - charger
+  - flashlight
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/leds/common.h>
+    #include <dt-bindings/iio/adc/mediatek,mt6370_adc.h>
+    #include <dt-bindings/usb/pd.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@34 {
+        compatible = "mediatek,mt6370";
+        reg = <0x34>;
+        wakeup-source;
+        interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        mt6370_adc: adc {
+          compatible = "mediatek,mt6370-adc";
+          #io-channel-cells = <1>;
+        };
+
+        backlight {
+          compatible = "mediatek,mt6370-backlight";
+          mediatek,bled-channel-use = /bits/ 8 <15>;
+        };
+
+        charger {
+          compatible = "mediatek,mt6370-charger";
+          interrupts = <68>, <48>, <6>;
+          interrupt-names = "uvp_d_evt", "attach_i", "mivr";
+          io-channels = <&mt6370_adc MT6370_CHAN_IBUS>;
+
+          mt6370_otg_vbus: usb-otg-vbus-regulator {
+            regulator-name = "mt6370-usb-otg-vbus";
+            regulator-min-microvolt = <4350000>;
+            regulator-max-microvolt = <5800000>;
+            regulator-min-microamp = <500000>;
+            regulator-max-microamp = <3000000>;
+          };
+        };
+
+        indicator {
+          compatible = "mediatek,mt6370-indicator";
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          multi-led@0 {
+            reg = <0>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_RGB>;
+            led-max-microamp = <24000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            led@0 {
+              reg = <0>;
+              color = <LED_COLOR_ID_RED>;
+            };
+            led@1 {
+              reg = <1>;
+              color = <LED_COLOR_ID_GREEN>;
+            };
+            led@2 {
+              reg = <2>;
+              color = <LED_COLOR_ID_BLUE>;
+            };
+          };
+          led@3 {
+            reg = <3>;
+            function = LED_FUNCTION_INDICATOR;
+            color = <LED_COLOR_ID_WHITE>;
+            led-max-microamp = <6000>;
+          };
+        };
+
+        flashlight {
+          compatible = "mediatek,mt6370-flashlight";
+          #address-cells = <1>;
+          #size-cells = <0>;
+          led@0 {
+            reg = <0>;
+            led-sources = <0>;
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            function-enumerator = <1>;
+            led-max-microamp = <200000>;
+            flash-max-microamp = <500000>;
+            flash-max-timeout-us = <1248000>;
+          };
+          led@1 {
+            reg = <1>;
+            led-sources = <1>;
+            function = LED_FUNCTION_FLASH;
+            color = <LED_COLOR_ID_WHITE>;
+            function-enumerator = <2>;
+            led-max-microamp = <200000>;
+            flash-max-microamp = <500000>;
+            flash-max-timeout-us = <1248000>;
+          };
+        };
+
+        tcpc {
+          compatible = "mediatek,mt6370-tcpc";
+          interrupts-extended = <&gpio26 4 IRQ_TYPE_LEVEL_LOW>;
+
+          connector {
+            compatible = "usb-c-connector";
+            label = "USB-C";
+            vbus-supply = <&mt6370_otg_vbus>;
+            data-role = "dual";
+            power-role = "dual";
+            try-power-role = "sink";
+            source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+            sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
+            op-sink-microwatt = <10000000>;
+
+            ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port@0 {
+                reg = <0>;
+                endpoint {
+                  remote-endpoint = <&usb_hs>;
+                };
+              };
+              port@1 {
+                reg = <1>;
+                endpoint {
+                  remote-endpoint = <&usb_ss>;
+                };
+              };
+              port@2 {
+                reg = <2>;
+                endpoint {
+                  remote-endpoint = <&dp_aux>;
+                };
+              };
+            };
+          };
+        };
+
+        regulators {
+          dsvbst {
+            regulator-name = "mt6370-dsv-vbst";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6200000>;
+          };
+          dsvpos {
+            regulator-name = "mt6370-dsv-vpos";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6000000>;
+            regulator-boot-on;
+          };
+          dsvneg {
+            regulator-name = "mt6370-dsv-vneg";
+            regulator-min-microvolt = <4000000>;
+            regulator-max-microvolt = <6000000>;
+            regulator-boot-on;
+          };
+          vibldo {
+            regulator-name = "mt6370-vib-ldo";
+            regulator-min-microvolt = <1600000>;
+            regulator-max-microvolt = <4000000>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml
new file mode 100644
index 000000000000..c8c4812fffe2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mediatek,mt8195-scpsys.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mediatek,mt8195-scpsys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek System Control Processor System
+
+maintainers:
+  - MandyJH Liu <mandyjh.liu@mediatek.com>
+
+description:
+  MediaTek System Control Processor System (SCPSYS) has several
+  power management tasks. The tasks include MTCMOS power
+  domain control, thermal measurement, DVFS, etc.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8167-scpsys
+          - mediatek,mt8173-scpsys
+          - mediatek,mt8183-scpsys
+          - mediatek,mt8186-scpsys
+          - mediatek,mt8192-scpsys
+          - mediatek,mt8195-scpsys
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  power-controller:
+    $ref: /schemas/power/mediatek,power-controller.yaml#
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    syscon@10006000 {
+      compatible = "mediatek,mt8195-scpsys", "syscon", "simple-mfd";
+      reg = <0x10006000 0x100>;
+
+      spm: power-controller {
+        compatible = "mediatek,mt8195-power-controller";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        #power-domain-cells = <1>;
+
+        /* sample of power domain nodes */
+        power-domain@MT8195_POWER_DOMAIN_PCIE_PHY {
+          reg = <MT8195_POWER_DOMAIN_PCIE_PHY>;
+          #power-domain-cells = <0>;
+        };
+
+        power-domain@MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY {
+          reg = <MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>;
+          #power-domain-cells = <0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml b/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
index f91acc42d652..5ba849d78d8a 100644
--- a/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
+++ b/Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
@@ -18,7 +18,9 @@ description: |
 
 properties:
   compatible:
-    const: mps,mp2629
+    enum:
+      - mps,mp2629
+      - mps,mp2733
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
new file mode 100644
index 000000000000..8bd1abfc44d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mscc,ocelot.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mscc,ocelot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ocelot Externally-Controlled Ethernet Switch
+
+maintainers:
+  - Colin Foster <colin.foster@in-advantage.com>
+
+description: |
+  The Ocelot ethernet switch family contains chips that have an internal CPU
+  (VSC7513, VSC7514) and chips that don't (VSC7511, VSC7512). All switches have
+  the option to be controlled externally via external interfaces like SPI or
+  PCIe.
+
+  The switch family is a multi-port networking switch that supports many
+  interfaces. Additionally, the device can perform pin control, MDIO buses, and
+  external GPIO expanders.
+
+properties:
+  compatible:
+    enum:
+      - mscc,vsc7512
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  spi-max-frequency:
+    maxItems: 1
+
+patternProperties:
+  "^pinctrl@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/mscc,ocelot-pinctrl.yaml
+
+  "^gpio@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/microchip,sparx5-sgpio.yaml
+    properties:
+      compatible:
+        enum:
+          - mscc,ocelot-sgpio
+
+  "^mdio@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/net/mscc,miim.yaml
+    properties:
+      compatible:
+        enum:
+          - mscc,ocelot-miim
+
+  "^ethernet-switch@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/net/mscc,vsc7514-switch.yaml
+    unevaluatedProperties: false
+    properties:
+      compatible:
+        enum:
+          - mscc,vsc7512-switch
+
+required:
+  - compatible
+  - reg
+  - '#address-cells'
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    ocelot_clock: ocelot-clock {
+          compatible = "fixed-clock";
+          #clock-cells = <0>;
+          clock-frequency = <125000000>;
+      };
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        soc@0 {
+            compatible = "mscc,vsc7512";
+            spi-max-frequency = <2500000>;
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            mdio@7107009c {
+                compatible = "mscc,ocelot-miim";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x7107009c 0x24>;
+
+                sw_phy0: ethernet-phy@0 {
+                    reg = <0x0>;
+                };
+            };
+
+            mdio@710700c0 {
+                compatible = "mscc,ocelot-miim";
+                pinctrl-names = "default";
+                pinctrl-0 = <&miim1_pins>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                reg = <0x710700c0 0x24>;
+
+                sw_phy4: ethernet-phy@4 {
+                    reg = <0x4>;
+                };
+            };
+
+            gpio: pinctrl@71070034 {
+                compatible = "mscc,ocelot-pinctrl";
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&gpio 0 0 22>;
+                reg = <0x71070034 0x6c>;
+
+                sgpio_pins: sgpio-pins {
+                    pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3";
+                    function = "sg0";
+                };
+
+                miim1_pins: miim1-pins {
+                    pins = "GPIO_14", "GPIO_15";
+                    function = "miim";
+                };
+            };
+
+            gpio@710700f8 {
+                compatible = "mscc,ocelot-sgpio";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                bus-frequency = <12500000>;
+                clocks = <&ocelot_clock>;
+                microchip,sgpio-port-ranges = <0 15>;
+                pinctrl-names = "default";
+                pinctrl-0 = <&sgpio_pins>;
+                reg = <0x710700f8 0x100>;
+
+                sgpio_in0: gpio@0 {
+                    compatible = "microchip,sparx5-sgpio-bank";
+                    reg = <0>;
+                    gpio-controller;
+                    #gpio-cells = <3>;
+                    ngpios = <64>;
+                };
+
+                sgpio_out1: gpio@1 {
+                    compatible = "microchip,sparx5-sgpio-bank";
+                    reg = <1>;
+                    gpio-controller;
+                    #gpio-cells = <3>;
+                    ngpios = <64>;
+                };
+            };
+        };
+    };
+
+...
+
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 99a84b69a29f..294693a8906c 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -13,14 +13,16 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
 See the following for pwarp node definitions:
-../soc/mediatek/pwrap.txt
+../soc/mediatek/mediatek,pwrap.yaml
 
 This document describes the binding for MFD device and its sub module.
 
 Required properties:
 compatible:
 	"mediatek,mt6323" for PMIC MT6323
-	"mediatek,mt6358" for PMIC MT6358
+	"mediatek,mt6331" for PMIC MT6331 and MT6332
+	"mediatek,mt6357" for PMIC MT6357
+	"mediatek,mt6358" for PMIC MT6358 and MT6366
 	"mediatek,mt6359" for PMIC MT6359
 	"mediatek,mt6397" for PMIC MT6397
 
@@ -29,6 +31,7 @@ Optional subnodes:
 - rtc
 	Required properties: Should be one of follows
 		- compatible: "mediatek,mt6323-rtc"
+		- compatible: "mediatek,mt6331-rtc"
 		- compatible: "mediatek,mt6358-rtc"
 		- compatible: "mediatek,mt6397-rtc"
 	For details, see ../rtc/rtc-mt6397.txt
@@ -52,8 +55,10 @@ Optional subnodes:
 	see ../leds/leds-mt6323.txt
 
 - keys
-	Required properties:
-		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
+	Required properties: Should be one of the following
+		- compatible: "mediatek,mt6323-keys"
+		- compatible: "mediatek,mt6331-keys"
+		- compatible: "mediatek,mt6397-keys"
 	see ../input/mtk-pmic-keys.txt
 
 - power-controller
diff --git a/Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml b/Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml
new file mode 100644
index 000000000000..b1ade64a1554
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/nxp,bbnsm.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/nxp,bbnsm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Battery-Backed Non-Secure Module
+
+maintainers:
+  - Jacky Bai <ping.bai@nxp.com>
+
+description: |
+  NXP BBNSM serves as non-volatile logic and storage for the system.
+  it Intergrates RTC & ON/OFF control.
+  The RTC can retain its state and continues counting even when the
+  main chip is power down. A time alarm is generated once the most
+  significant 32 bits of the real-time counter match the value in the
+  Time Alarm register.
+  The ON/OFF logic inside the BBNSM allows for connecting directly to
+  a PMIC or other voltage regulator device. both smart PMIC mode and
+  Dumb PMIC mode supported.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - nxp,imx93-bbnsm
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  rtc:
+    type: object
+    $ref: /schemas/rtc/rtc.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - nxp,imx93-bbnsm-rtc
+
+      interrupts:
+        maxItems: 1
+
+      start-year: true
+
+    required:
+      - compatible
+      - interrupts
+
+    additionalProperties: false
+
+  pwrkey:
+    type: object
+    $ref: /schemas/input/input.yaml#
+
+    properties:
+      compatible:
+        enum:
+          - nxp,imx93-bbnsm-pwrkey
+
+      interrupts:
+        maxItems: 1
+
+      linux,code: true
+
+    required:
+      - compatible
+      - interrupts
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - rtc
+  - pwrkey
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/linux-event-codes.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bbnsm: bbnsm@44440000 {
+        compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd";
+        reg = <0x44440000 0x10000>;
+
+        bbnsm_rtc: rtc {
+            compatible = "nxp,imx93-bbnsm-rtc";
+            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+        };
+
+        bbnsm_pwrkey: pwrkey {
+            compatible = "nxp,imx93-bbnsm-pwrkey";
+            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+            linux,code = <KEY_POWER>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
index aa1eaa59581b..a0d8c30c2631 100644
--- a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
@@ -64,8 +64,8 @@ Required properties if child node exists:
 Properties for children:
 
 The OMAP HS USB Host subsystem contains EHCI and OHCI controllers.
-See Documentation/devicetree/bindings/usb/ehci-omap.txt and
-Documentation/devicetree/bindings/usb/ohci-omap3.txt.
+See Documentation/devicetree/bindings/usb/generic-ehci.yaml and
+Documentation/devicetree/bindings/usb/generic-ohci.yaml.
 
 Example for OMAP4:
 
@@ -78,14 +78,14 @@ usbhshost: usbhshost@4a064000 {
 	ranges;
 
 	usbhsohci: ohci@4a064800 {
-		compatible = "ti,ohci-omap3", "usb-ohci";
+		compatible = "ti,ohci-omap3";
 		reg = <0x4a064800 0x400>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 76 0x4>;
 	};
 
 	usbhsehci: ehci@4a064c00 {
-		compatible = "ti,ehci-omap", "usb-ehci";
+		compatible = "ti,ehci-omap";
 		reg = <0x4a064c00 0x400>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 77 0x4>;
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index ec3138c1bbfc..e6a2387d8650 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/qcom,pm8008.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies, Inc. PM8008 PMIC bindings
+title: Qualcomm Technologies, Inc. PM8008 PMIC
 
 maintainers:
   - Guru Das Srinagesh <gurus@codeaurora.org>
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
deleted file mode 100644
index 5ef79bf3d035..000000000000
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-          Qualcomm SPMI PMICs multi-function device bindings
-
-The Qualcomm SPMI series presently includes PM8941, PM8841 and PMA8084
-PMICs.  These PMICs use a QPNP scheme through SPMI interface.
-QPNP is effectively a partitioning scheme for dividing the SPMI extended
-register space up into logical pieces, and set of fixed register
-locations/definitions within these regions, with some of these regions
-specifically used for interrupt handling.
-
-The QPNP PMICs are used with the Qualcomm Snapdragon series SoCs, and are
-interfaced to the chip via the SPMI (System Power Management Interface) bus.
-Support for multiple independent functions are implemented by splitting the
-16-bit SPMI slave address space into 256 smaller fixed-size regions, 256 bytes
-each. A function can consume one or more of these fixed-size register regions.
-
-Required properties:
-- compatible:      Should contain one of:
-                   "qcom,pm8941",
-                   "qcom,pm8841",
-                   "qcom,pma8084",
-                   "qcom,pm8019",
-                   "qcom,pm8226",
-                   "qcom,pm8110",
-                   "qcom,pma8084",
-                   "qcom,pmi8962",
-                   "qcom,pmd9635",
-                   "qcom,pm8994",
-                   "qcom,pmi8994",
-                   "qcom,pm8916",
-                   "qcom,pm8004",
-                   "qcom,pm8909",
-                   "qcom,pm8950",
-                   "qcom,pmi8950",
-                   "qcom,pm8998",
-                   "qcom,pmi8998",
-                   "qcom,pm8005",
-                   "qcom,pm8350c",
-                   "qcom,pmk8350",
-                   "qcom,pm7325",
-                   "qcom,pmr735a",
-                   or generalized "qcom,spmi-pmic".
-- reg:             Specifies the SPMI USID slave address for this device.
-                   For more information see:
-                   Documentation/devicetree/bindings/spmi/spmi.yaml
-
-Required properties for peripheral child nodes:
-- compatible:      Should contain "qcom,xxx", where "xxx" is a peripheral name.
-
-Optional properties for peripheral child nodes:
-- interrupts:      Interrupts are specified as a 4-tuple. For more information
-                   see:
-                   Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
-- interrupt-names: Corresponding interrupt name to the interrupts property
-
-Each child node of SPMI slave id represents a function of the PMIC. In the
-example below the rtc device node represents a peripheral of pm8941
-SID = 0. The regulator device node represents a peripheral of pm8941 SID = 1.
-
-Example:
-
-	spmi {
-		compatible = "qcom,spmi-pmic-arb";
-
-		pm8941@0 {
-			compatible = "qcom,pm8941", "qcom,spmi-pmic";
-			reg = <0x0 SPMI_USID>;
-
-			rtc {
-				compatible = "qcom,rtc";
-				interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-				interrupt-names = "alarm";
-			};
-		};
-
-		pm8941@1 {
-			compatible = "qcom,pm8941", "qcom,spmi-pmic";
-			reg = <0x1 SPMI_USID>;
-
-			regulator {
-				compatible = "qcom,regulator";
-				regulator-name = "8941_boost";
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
new file mode 100644
index 000000000000..36de335a33aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -0,0 +1,327 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SPMI PMICs multi-function device
+
+description: |
+  Some Qualcomm PMICs used with the Snapdragon series SoCs are interfaced
+  to the chip via the SPMI (System Power Management Interface) bus.
+  Support for multiple independent functions are implemented by splitting the
+  16-bit SPMI peripheral address space into 256 smaller fixed-size regions, 256 bytes
+  each. A function can consume one or more of these fixed-size register regions.
+
+  The Qualcomm SPMI series includes the PM8941, PM8841, PMA8084, PM8998 and other
+  PMICs.  These PMICs use a "QPNP" scheme through SPMI interface.
+  QPNP is effectively a partitioning scheme for dividing the SPMI extended
+  register space up into logical pieces, and set of fixed register
+  locations/definitions within these regions, with some of these regions
+  specifically used for interrupt handling.
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+
+properties:
+  $nodename:
+    oneOf:
+      - pattern: '^pmic@.*$'
+      - pattern: '^pm(a|s)?[0-9]*@.*$'
+        deprecated: true
+
+  compatible:
+    items:
+      - enum:
+          - qcom,pm2250
+          - qcom,pm6125
+          - qcom,pm6150
+          - qcom,pm6150l
+          - qcom,pm6350
+          - qcom,pm660
+          - qcom,pm660l
+          - qcom,pm7250b
+          - qcom,pm7325
+          - qcom,pm8004
+          - qcom,pm8005
+          - qcom,pm8009
+          - qcom,pm8010
+          - qcom,pm8019
+          - qcom,pm8028
+          - qcom,pm8110
+          - qcom,pm8150
+          - qcom,pm8150b
+          - qcom,pm8150c
+          - qcom,pm8150l
+          - qcom,pm8226
+          - qcom,pm8350
+          - qcom,pm8350b
+          - qcom,pm8350c
+          - qcom,pm8550
+          - qcom,pm8550b
+          - qcom,pm8550ve
+          - qcom,pm8550vs
+          - qcom,pm8841
+          - qcom,pm8909
+          - qcom,pm8916
+          - qcom,pm8941
+          - qcom,pm8950
+          - qcom,pm8953
+          - qcom,pm8994
+          - qcom,pm8998
+          - qcom,pma8084
+          - qcom,pmd9635
+          - qcom,pmi8950
+          - qcom,pmi8962
+          - qcom,pmi8994
+          - qcom,pmi8998
+          - qcom,pmk8002
+          - qcom,pmk8350
+          - qcom,pmk8550
+          - qcom,pmm8155au
+          - qcom,pmm8654au
+          - qcom,pmp8074
+          - qcom,pmr735a
+          - qcom,pmr735b
+          - qcom,pmr735d
+          - qcom,pms405
+          - qcom,pmx55
+          - qcom,pmx65
+          - qcom,smb2351
+      - const: qcom,spmi-pmic
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  labibb:
+    type: object
+    $ref: /schemas/regulator/qcom-labibb-regulator.yaml#
+
+  regulators:
+    type: object
+    $ref: /schemas/regulator/qcom,spmi-regulator.yaml#
+
+  pwm:
+    type: object
+    $ref: /schemas/leds/leds-qcom-lpg.yaml#
+
+patternProperties:
+  "^adc@[0-9a-f]+$":
+    type: object
+    oneOf:
+      - $ref: /schemas/iio/adc/qcom,spmi-iadc.yaml#
+      - $ref: /schemas/iio/adc/qcom,spmi-rradc.yaml#
+      - $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml#
+
+  "^adc-tm@[0-9a-f]+$":
+    type: object
+    # ref depends on compatible, see allOf below
+
+  "^audio-codec@[0-9a-f]+$":
+    type: object
+    additionalProperties: true # FIXME qcom,pm8916-wcd-analog-codec binding not converted yet
+
+  "^charger@[0-9a-f]+$":
+    type: object
+    oneOf:
+      - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml#
+      - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml#
+
+  "gpio@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml#
+
+  "^led-controller@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/leds/qcom,spmi-flash-led.yaml#
+
+  "^nvram@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/nvmem/qcom,spmi-sdam.yaml#
+
+  "pon@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/power/reset/qcom,pon.yaml#
+
+  "^rtc@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml#
+
+  "^temp-alarm@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/thermal/qcom,spmi-temp-alarm.yaml#
+
+  "^usb-detect@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/extcon/qcom,pm8941-misc.yaml#
+
+  "^usb-vbus-regulator@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/regulator/qcom,usb-vbus-regulator.yaml#
+
+  "^vibrator@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/input/qcom,pm8xxx-vib.yaml#
+
+  "^mpps@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/pinctrl/qcom,pmic-mpp.yaml#
+
+  "(.*)?(wled|leds)@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/leds/backlight/qcom-wled.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8998
+    then:
+      patternProperties:
+        "^adc-tm@[0-9a-f]+$":
+          $ref: /schemas/thermal/qcom-spmi-adc-tm-hc.yaml#
+    else:
+      patternProperties:
+        "^adc-tm@[0-9a-f]+$":
+          $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/spmi/spmi.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    spmi@c440000 {
+        compatible = "qcom,spmi-pmic-arb";
+        reg = <0x0c440000 0x1100>,
+              <0x0c600000 0x2000000>,
+              <0x0e600000 0x100000>,
+              <0x0e700000 0xa0000>,
+              <0x0c40a000 0x26000>;
+        reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+        interrupt-names = "periph_irq";
+        interrupts = <GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>;
+        qcom,ee = <0>;
+        qcom,channel = <0>;
+        #address-cells = <2>;
+        #size-cells = <0>;
+        interrupt-controller;
+        #interrupt-cells = <4>;
+
+        pmi8998_lsid0: pmic@2 {
+            compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+            reg = <0x2 SPMI_USID>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            pmi8998_gpio: gpio@c000 {
+                compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
+                reg = <0xc000>;
+                gpio-controller;
+                gpio-ranges = <&pmi8998_gpio 0 0 14>;
+                #gpio-cells = <2>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/iio/qcom,spmi-vadc.h>
+    #include <dt-bindings/spmi/spmi.h>
+
+    pmic@0 {
+        compatible = "qcom,pm6150", "qcom,spmi-pmic";
+        reg = <0x0 SPMI_USID>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pon@800 {
+            compatible = "qcom,pm8998-pon";
+            reg = <0x800>;
+            mode-bootloader = <0x2>;
+            mode-recovery = <0x1>;
+
+            pwrkey {
+                compatible = "qcom,pm8941-pwrkey";
+                interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+                debounce = <15625>;
+                bias-pull-up;
+                linux,code = <KEY_POWER>;
+            };
+        };
+
+        temp-alarm@2400 {
+            compatible = "qcom,spmi-temp-alarm";
+            reg = <0x2400>;
+            interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+            io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
+            io-channel-names = "thermal";
+            #thermal-sensor-cells = <0>;
+        };
+
+        pm6150_adc: adc@3100 {
+            compatible = "qcom,spmi-adc5";
+            reg = <0x3100>;
+            interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            #io-channel-cells = <1>;
+
+            channel@6 {
+                reg = <ADC5_DIE_TEMP>;
+                label = "die_temp";
+            };
+
+            channel@4f {
+                reg = <ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time = <200>;
+            };
+        };
+
+        adc-tm@3500 {
+            compatible = "qcom,spmi-adc-tm5";
+            reg = <0x3500>;
+            interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+            #thermal-sensor-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            charger-thermistor@0 {
+                reg = <0>;
+                io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
+                qcom,ratiometric;
+                qcom,hw-settle-time-us = <200>;
+            };
+        };
+
+        pm6150_gpio: gpio@c000 {
+            compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
+            reg = <0xc000>;
+            gpio-controller;
+            gpio-ranges = <&pm6150_gpio 0 0 10>;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt b/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt
deleted file mode 100644
index e90519d566a3..000000000000
--- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-QCOM Top Control and Status Register
-
-Qualcomm devices have a set of registers that provide various control and status
-functions for their peripherals.  This node is intended to allow access to these
-registers via syscon.
-
-Required properties:
-- compatible:	Should contain:
-		"qcom,tcsr-ipq8064", "syscon" for IPQ8064
-		"qcom,tcsr-apq8064", "syscon" for APQ8064
-		"qcom,tcsr-msm8660", "syscon" for MSM8660
-		"qcom,tcsr-msm8960", "syscon" for MSM8960
-		"qcom,tcsr-msm8974", "syscon" for MSM8974
-		"qcom,tcsr-apq8084", "syscon" for APQ8084
-		"qcom,tcsr-msm8916", "syscon" for MSM8916
-- reg: Address range for TCSR registers
-
-Example:
-	tcsr: syscon@1a400000 {
-		compatible = "qcom,tcsr-msm8960", "syscon";
-		reg = <0x1a400000 0x100>;
-	};
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
new file mode 100644
index 000000000000..fe790af7b4fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom,tcsr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Top Control and Status Register
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  Qualcomm devices have a set of registers that provide various control and
+  status functions for their peripherals.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,msm8976-tcsr
+          - qcom,msm8998-tcsr
+          - qcom,qcs404-tcsr
+          - qcom,sc7180-tcsr
+          - qcom,sc7280-tcsr
+          - qcom,sc8280xp-tcsr
+          - qcom,sdm630-tcsr
+          - qcom,sdm845-tcsr
+          - qcom,sdx55-tcsr
+          - qcom,sdx65-tcsr
+          - qcom,sm8150-tcsr
+          - qcom,sm8450-tcsr
+          - qcom,tcsr-apq8064
+          - qcom,tcsr-apq8084
+          - qcom,tcsr-ipq5332
+          - qcom,tcsr-ipq6018
+          - qcom,tcsr-ipq8064
+          - qcom,tcsr-ipq9574
+          - qcom,tcsr-mdm9615
+          - qcom,tcsr-msm8226
+          - qcom,tcsr-msm8660
+          - qcom,tcsr-msm8916
+          - qcom,tcsr-msm8953
+          - qcom,tcsr-msm8960
+          - qcom,tcsr-msm8974
+          - qcom,tcsr-msm8996
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    syscon@1a400000 {
+        compatible = "qcom,tcsr-msm8960", "syscon";
+        reg = <0x1a400000 0x100>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
index 9065ec53e643..9c51c1b19067 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm PM8xxx PMIC multi-function devices
 
 maintainers:
-  - Satya Priya <skakit@codeaurora.org>
+  - Satya Priya <quic_c_skakit@quicinc.com>
 
 description: |
   The PM8xxx family of Power Management ICs are used to provide regulated
@@ -15,10 +15,15 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8058
-      - qcom,pm8821
-      - qcom,pm8921
+    oneOf:
+      - enum:
+          - qcom,pm8058
+          - qcom,pm8821
+          - qcom,pm8921
+      - items:
+          - enum:
+              - qcom,pm8018
+          - const: qcom,pm8921
 
   reg:
     maxItems: 1
@@ -38,9 +43,13 @@ properties:
   interrupt-controller: true
 
 patternProperties:
+  "led@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/leds/qcom,pm8058-led.yaml#
+
   "rtc@[0-9a-f]+$":
     type: object
-    $ref: "../rtc/qcom-pm8xxx-rtc.yaml"
+    $ref: ../rtc/qcom-pm8xxx-rtc.yaml
 
 required:
   - compatible
@@ -51,4 +60,23 @@ required:
   - interrupt-controller
 
 additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    ssbi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@0 {
+        compatible = "qcom,pm8921";
+        reg = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        interrupt-parent = <&tlmm>;
+        interrupts = <32 IRQ_TYPE_EDGE_RISING>;
+      };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
deleted file mode 100644
index b823b8625243..000000000000
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ /dev/null
@@ -1,283 +0,0 @@
-Qualcomm Resource Power Manager (RPM)
-
-This driver is used to interface with the Resource Power Manager (RPM) found in
-various Qualcomm platforms. The RPM allows each component in the system to vote
-for state of the system resources, such as clocks, regulators and bus
-frequencies.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,rpm-apq8064"
-		    "qcom,rpm-msm8660"
-		    "qcom,rpm-msm8960"
-		    "qcom,rpm-ipq8064"
-		    "qcom,rpm-mdm9615"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: base address and size of the RPM's message ram
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: three entries specifying the RPM's:
-		    1. acknowledgement interrupt
-		    2. error interrupt
-		    3. wakeup interrupt
-
-- interrupt-names:
-	Usage: required
-	Value type: <string-array>
-	Definition: must be the three strings "ack", "err" and "wakeup", in order
-
-- qcom,ipc:
-	Usage: required
-	Value type: <prop-encoded-array>
-
-	Definition: three entries specifying the outgoing ipc bit used for
-		    signaling the RPM:
-		    - phandle to a syscon node representing the apcs registers
-		    - u32 representing offset to the register within the syscon
-		    - u32 representing the ipc bit within the register
-
-
-= SUBNODES
-
-The RPM exposes resources to its subnodes. The below bindings specify the set
-of valid subnodes that can operate on these resources.
-
-== Regulators
-
-Regulator nodes are identified by their compatible:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,rpm-pm8058-regulators"
-		    "qcom,rpm-pm8901-regulators"
-		    "qcom,rpm-pm8921-regulators"
-		    "qcom,rpm-pm8018-regulators"
-		    "qcom,rpm-smb208-regulators"
-
-- vdd_l0_l1_lvs-supply:
-- vdd_l2_l11_l12-supply:
-- vdd_l3_l4_l5-supply:
-- vdd_l6_l7-supply:
-- vdd_l8-supply:
-- vdd_l9-supply:
-- vdd_l10-supply:
-- vdd_l13_l16-supply:
-- vdd_l14_l15-supply:
-- vdd_l17_l18-supply:
-- vdd_l19_l20-supply:
-- vdd_l21-supply:
-- vdd_l22-supply:
-- vdd_l23_l24_l25-supply:
-- vdd_ncp-supply:
-- vdd_s0-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-	Usage: optional (pm8058 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- lvs0_in-supply:
-- lvs1_in-supply:
-- lvs2_in-supply:
-- lvs3_in-supply:
-- mvs_in-supply:
-- vdd_l0-supply:
-- vdd_l1-supply:
-- vdd_l2-supply:
-- vdd_l3-supply:
-- vdd_l4-supply:
-- vdd_l5-supply:
-- vdd_l6-supply:
-- vdd_s0-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s3-supply:
-- vdd_s4-supply:
-	Usage: optional (pm8901 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vdd_l1_l2_l12_l18-supply:
-- vdd_l3_l15_l17-supply:
-- vdd_l4_l14-supply:
-- vdd_l5_l8_l16-supply:
-- vdd_l6_l7-supply:
-- vdd_l9_l11-supply:
-- vdd_l10_l22-supply:
-- vdd_l21_l23_l29-supply:
-- vdd_l24-supply:
-- vdd_l25-supply:
-- vdd_l26-supply:
-- vdd_l27-supply:
-- vdd_l28-supply:
-- vdd_ncp-supply:
-- vdd_s1-supply:
-- vdd_s2-supply:
-- vdd_s4-supply:
-- vdd_s5-supply:
-- vdd_s6-supply:
-- vdd_s7-supply:
-- vdd_s8-supply:
-- vin_5vs-supply:
-- vin_lvs1_3_6-supply:
-- vin_lvs2-supply:
-- vin_lvs4_5_7-supply:
-	Usage: optional (pm8921 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-- vin_lvs1-supply:
-- vdd_l7-supply:
-- vdd_l8-supply:
-- vdd_l9_l10_l11_l12-supply:
-	Usage: optional (pm8018 only)
-	Value type: <phandle>
-	Definition: reference to regulator supplying the input pin, as
-		    described in the data sheet
-
-The regulator node houses sub-nodes for each regulator within the device. Each
-sub-node is identified using the node's name, with valid values listed for each
-of the pmics below.
-
-pm8058:
-	l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15,
-	l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4,
-	lvs0, lvs1, ncp
-
-pm8901:
-	l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3,
-	mvs
-
-pm8921:
-	s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
-	l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28,
-	l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch,
-	ncp
-
-pm8018:
-	s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
-	l12, l14, lvs1
-
-smb208:
-	s1a, s1b, s2a, s2b
-
-The content of each sub-node is defined by the standard binding for regulators -
-see regulator.txt - with additional custom properties described below:
-
-=== Switch-mode Power Supply regulator custom properties
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <empty>
-	Definition: enable pull down of the regulator when inactive
-
-- qcom,switch-mode-frequency:
-	Usage: required
-	Value type: <u32>
-	Definition: Frequency (Hz) of the switch-mode power supply;
-		    must be one of:
-		    19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
-		    2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
-		    1480000, 1370000, 1280000, 1200000
-
-- qcom,force-mode:
-	Usage: optional (default if no other qcom,force-mode is specified)
-	Value type: <u32>
-	Definition: indicates that the regulator should be forced to a
-		   particular mode, valid values are:
-		   QCOM_RPM_FORCE_MODE_NONE - do not force any mode
-		   QCOM_RPM_FORCE_MODE_LPM - force into low power mode
-		   QCOM_RPM_FORCE_MODE_HPM - force into high power mode
-		   QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically
-					      select its own mode based on
-					      realtime current draw, only for:
-					      pm8921 smps and ftsmps
-
-- qcom,power-mode-hysteretic:
-	Usage: optional
-	Value type: <empty>
-	Definition: select that the power supply should operate in hysteretic
-		    mode, instead of the default pwm mode
-
-=== Low-dropout regulator custom properties
-
-- bias-pull-down:
-	Usage: optional
-	Value type: <empty>
-	Definition: enable pull down of the regulator when inactive
-
-- qcom,force-mode:
-	Usage: optional
-	Value type: <u32>
-	Definition: indicates that the regulator should not be forced to any
-		   particular mode, valid values are:
-		   QCOM_RPM_FORCE_MODE_NONE - do not force any mode
-		   QCOM_RPM_FORCE_MODE_LPM - force into low power mode
-		   QCOM_RPM_FORCE_MODE_HPM - force into high power mode
-		   QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass
-						mode, i.e.  to act as a switch
-						and not regulate, only for:
-						pm8921 pldo, nldo and nldo1200
-
-=== Negative Charge Pump custom properties
-
-- qcom,switch-mode-frequency:
-	Usage: required
-	Value type: <u32>
-	Definition: Frequency (Hz) of the switch mode power supply;
-		    must be one of:
-		    19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
-		    2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
-		    1480000, 1370000, 1280000, 1200000
-
-= EXAMPLE
-
-	#include <dt-bindings/mfd/qcom-rpm.h>
-
-	rpm@108000 {
-		compatible = "qcom,rpm-msm8960";
-		reg = <0x108000 0x1000>;
-		qcom,ipc = <&apcs 0x8 2>;
-
-		interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
-		interrupt-names = "ack", "err", "wakeup";
-
-		regulators {
-			compatible = "qcom,rpm-pm8921-regulators";
-			vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
-
-			s1 {
-				regulator-min-microvolt = <1225000>;
-				regulator-max-microvolt = <1225000>;
-
-				bias-pull-down;
-
-				qcom,switch-mode-frequency = <3200000>;
-			};
-
-			pm8921_s4: s4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-
-				qcom,switch-mode-frequency = <1600000>;
-				bias-pull-down;
-
-				qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml
new file mode 100644
index 000000000000..f73b8b25d7d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/richtek,rt5120.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/richtek,rt5120.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5120 PMIC
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT5120 provides four high-efficiency buck converters and one LDO voltage
+  regulator. The device is targeted at providingthe processor voltage, memory,
+  I/O, and peripheral rails in home entertainment devices. The I2C interface is
+  used for dynamic voltage scaling of the processor voltage, power rails on/off
+  sequence control, operation mode selection.
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt5120
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  wakeup-source: true
+
+  richtek,enable-undervolt-hiccup:
+    type: boolean
+    description: |
+      If used, under voltage protection trigger hiccup behavior, else latchup as
+      default
+
+  richtek,enable-overvolt-hiccup:
+    type: boolean
+    description:
+      Like as 'enable-uv-hiccup', it configures over voltage protection to
+      hiccup, else latchup as default
+
+  vin1-supply:
+    description: phandle for buck1 input power source
+
+  vin2-supply:
+    description: phandle for buck2 input power source
+
+  vin3-supply:
+    description: phandle for buck3 input power source
+
+  vin4-supply:
+    description: phandle for buck4 input power source
+
+  vinldo-supply:
+    description: phandle for ldo input power source
+
+  regulators:
+    type: object
+
+    patternProperties:
+      "^buck[1-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          regulator-allowed-modes:
+            description: |
+              Used to specify the allowed buck converter operating mode
+              mode mapping:
+                0: auto mode
+                1: force pwm mode
+            items:
+              enum: [0, 1]
+
+      "^(ldo|exten)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+  powerkey:
+    type: object
+    description:
+      PON key that connected to RT5120 PMIC.
+
+    properties:
+      compatible:
+        enum:
+          - richtek,rt5120-pwrkey
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+  - regulators
+  - powerkey
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@62 {
+        compatible = "richtek,rt5120";
+        reg = <0x62>;
+        interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        wakeup-source;
+
+        regulators {
+          buck1 {
+            regulator-name = "rt5120-buck1";
+            regulator-min-microvolt = <600000>;
+            regulator-max-microvolt = <1393750>;
+            regulator-allowed-modes = <0 1>;
+            regulator-boot-on;
+          };
+          buck2 {
+            regulator-name = "rt5120-buck2";
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1100000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+          };
+          buck3 {
+            regulator-name = "rt5120-buck3";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+          };
+          buck4 {
+            regulator-name = "rt5120-buck4";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <0 1>;
+            regulator-always-on;
+          };
+          ldo {
+            regulator-name = "rt5120-ldo";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+          exten {
+            regulator-name = "rt5120-exten";
+            regulator-min-microvolt = <3000000>;
+            regulator-max-microvolt = <3000000>;
+            regulator-always-on;
+          };
+        };
+        powerkey {
+          compatible = "richtek,rt5120-pwrkey";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
deleted file mode 100644
index 23a17a6663ec..000000000000
--- a/Documentation/devicetree/bindings/mfd/rk808.txt
+++ /dev/null
@@ -1,465 +0,0 @@
-RK8XX Power Management Integrated Circuit
-
-The rk8xx family current members:
-rk805
-rk808
-rk809
-rk817
-rk818
-
-Required properties:
-- compatible: "rockchip,rk805"
-- compatible: "rockchip,rk808"
-- compatible: "rockchip,rk809"
-- compatible: "rockchip,rk817"
-- compatible: "rockchip,rk818"
-- reg: I2C slave address
-- interrupts: the interrupt outputs of the controller.
-- #clock-cells: from common clock binding; shall be set to 1 (multiple clock
-  outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
-
-Optional properties:
-- clock-output-names: From common clock binding to override the
-  default output clock name
-- rockchip,system-power-controller: Telling whether or not this pmic is controlling
-  the system power.
-- wakeup-source: Device can be used as a wakeup source.
-
-Optional RK805 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- vcc5-supply:  The input supply for LDO_REG1 and LDO_REG2
-- vcc6-supply:  The input supply for LDO_REG3
-
-Optional RK808 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- vcc6-supply:  The input supply for LDO_REG1 and LDO_REG2
-- vcc7-supply:  The input supply for LDO_REG3 and LDO_REG7
-- vcc8-supply:  The input supply for SWITCH_REG1
-- vcc9-supply:  The input supply for LDO_REG4 and LDO_REG5
-- vcc10-supply: The input supply for LDO_REG6
-- vcc11-supply: The input supply for LDO_REG8
-- vcc12-supply: The input supply for SWITCH_REG2
-- dvs-gpios:  buck1/2 can be controlled by gpio dvs, this is GPIO specifiers
-  for 2 host gpio's used for dvs. The format of the gpio specifier depends in
-  the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
-  very quickly with no slow ramp time.
-
-Optional shared RK809 and RK817 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- vcc5-supply:  The input supply for LDO_REG1, LDO_REG2, LDO_REG3
-- vcc6-supply:  The input supply for LDO_REG4, LDO_REG5, LDO_REG6
-- vcc7-supply:  The input supply for LDO_REG7, LDO_REG8, LDO_REG9
-
-Optional RK809 properties:
-- vcc8-supply:  The input supply for SWITCH_REG1
-- vcc9-supply:  The input supply for DCDC_REG5, SWITCH_REG2
-
-Optional RK817 properties:
-- clocks:	The input clock for the audio codec
-- clock-names:	The clock name for the codec clock. Should be "mclk".
-- #sound-dai-cells: Needed for the interpretation of sound dais. Should be 0.
-
-- vcc8-supply:  The input supply for BOOST
-- vcc9-supply:  The input supply for OTG_SWITCH
-- codec:	The child node for the codec to hold additional properties.
-		If no additional properties are required for the codec, this
-		node can be omitted.
-
-- rockchip,mic-in-differential: Telling if the microphone uses differential
-				mode. Should be under the codec child node.
-
-Optional RK818 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- boost-supply: The input supply for DCDC_BOOST
-- vcc6-supply:  The input supply for LDO_REG1 and LDO_REG2
-- vcc7-supply:  The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
-- vcc8-supply:  The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
-- vcc9-supply:  The input supply for LDO_REG9 and SWITCH_REG
-- h_5v-supply:  The input supply for HDMI_SWITCH
-- usb-supply:   The input supply for OTG_SWITCH
-
-Regulators: All the regulators of RK8XX to be instantiated shall be
-listed in a child node named 'regulators'. Each regulator is represented
-by a child node of the 'regulators' node.
-
-	regulator-name {
-		/* standard regulator bindings here */
-	};
-
-Following regulators of the RK805 PMIC regulators are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK805 datasheet.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 4.
-	- LDO_REGn
-		- valid values for n are 1 to 3
-
-Following regulators of the RK808 PMIC block are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK808 datasheet.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 4.
-	- LDO_REGn
-		- valid values for n are 1 to 8.
-	- SWITCH_REGn
-		- valid values for n are 1 to 2
-
-Following regulators of the RK809 and RK817 PMIC blocks are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK809 and RK817 datasheets.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 5 for RK809.
-		- valid values for n are 1 to 4 for RK817.
-	- LDO_REGn
-		- valid values for n are 1 to 9 for RK809.
-		- valid values for n are 1 to 9 for RK817.
-	- SWITCH_REGn
-		- valid values for n are 1 to 2 for RK809.
-	- BOOST for RK817
-	- OTG_SWITCH for RK817
-
-Following regulators of the RK818 PMIC block are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK818 datasheet.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 4.
-	- LDO_REGn
-		- valid values for n are 1 to 9.
-	- SWITCH_REG
-	- HDMI_SWITCH
-	- OTG_SWITCH
-
-It is necessary to configure three pins for both the RK809 and RK817, the three
-pins are "gpio_ts" "gpio_gt" "gpio_slp".
-	The gpio_gt and gpio_ts pins support the gpio function.
-	The gpio_slp pin is for controlling the pmic states, as below:
-		- reset
-		- power down
-		- sleep
-
-Standard regulator bindings are used inside regulator subnodes. Check
-  Documentation/devicetree/bindings/regulator/regulator.txt
-for more details
-
-Example:
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		clock-output-names = "xin32k", "rk808-clkout2";
-		interrupt-parent = <&gpio0>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>;
-		dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
-			    <&gpio7 15 GPIO_ACTIVE_HIGH>;
-		reg = <0x1b>;
-		rockchip,system-power-controller;
-		wakeup-source;
-		#clock-cells = <1>;
-
-		vcc8-supply = <&vcc_18>;
-		vcc9-supply = <&vcc_io>;
-		vcc10-supply = <&vcc_io>;
-		vcc12-supply = <&vcc_io>;
-		vddio-supply = <&vccio_pmu>;
-
-		regulators {
-			vdd_cpu: DCDC_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-name = "vdd_arm";
-			};
-
-			vdd_gpu: DCDC_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-name = "vdd_gpu";
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_ddr";
-			};
-
-			vcc_io: DCDC_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_io";
-			};
-
-			vccio_pmu: LDO_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vccio_pmu";
-			};
-
-			vcc_tp: LDO_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_tp";
-			};
-
-			vdd_10: LDO_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd_10";
-			};
-
-			vcc18_lcd: LDO_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc18_lcd";
-			};
-
-			vccio_sd: LDO_REG5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vccio_sd";
-			};
-
-			vdd10_lcd: LDO_REG6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd10_lcd";
-			};
-
-			vcc_18: LDO_REG7 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_18";
-			};
-
-			vcca_codec: LDO_REG8 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcca_codec";
-			};
-
-			vcc_wl: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_wl";
-			};
-
-			vcc_lcd: SWITCH_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_lcd";
-			};
-		};
-	};
-
-	rk817: pmic@20 {
-		compatible = "rockchip,rk817";
-		reg = <0x20>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
-		clock-output-names = "rk808-clkout1", "xin32k";
-		clock-names = "mclk";
-		clocks = <&cru SCLK_I2S1_OUT>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
-		wakeup-source;
-		#clock-cells = <1>;
-		#sound-dai-cells = <0>;
-
-		vcc1-supply = <&vccsys>;
-		vcc2-supply = <&vccsys>;
-		vcc3-supply = <&vccsys>;
-		vcc4-supply = <&vccsys>;
-		vcc5-supply = <&vccsys>;
-		vcc6-supply = <&vccsys>;
-		vcc7-supply = <&vccsys>;
-
-		regulators {
-			vdd_logic: DCDC_REG1 {
-				regulator-name = "vdd_logic";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <950000>;
-				};
-			};
-
-			vdd_arm: DCDC_REG2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <950000>;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_3v3: DCDC_REG4 {
-				regulator-name = "vcc_3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_1v8: LDO_REG2 {
-				regulator-name = "vcc_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vdd_1v0: LDO_REG3 {
-				regulator-name = "vdd_1v0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc3v3_pmu: LDO_REG4 {
-				regulator-name = "vcc3v3_pmu";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vccio_sd: LDO_REG5 {
-				regulator-name = "vccio_sd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_sd: LDO_REG6 {
-				regulator-name = "vcc_sd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_bl: LDO_REG7 {
-				regulator-name = "vcc_bl";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_lcd: LDO_REG8 {
-				regulator-name = "vcc_lcd";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <2800000>;
-				};
-			};
-
-			vcc_cam: LDO_REG9 {
-				regulator-name = "vcc_cam";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-		};
-
-		rk817_codec: codec {
-			rockchip,mic-in-differential;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml
new file mode 100644
index 000000000000..4992f71b6fc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml
@@ -0,0 +1,219 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk805.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK805 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK805 series PMIC. This device consists of an i2c controlled MFD
+  that includes multiple switchable regulators.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk805
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    minimum: 0
+    maximum: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc5-supply:
+    description:
+      The input supply for LDO_REG1 and LDO_REG2.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG3.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(DCDC_REG[1-4]|LDO_REG[1-3])$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        '#clock-cells':
+          const: 0
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 1
+
+    else:
+      properties:
+        clock-output-names:
+          maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@18 {
+            compatible = "rockchip,rk805";
+            reg = <0x18>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int_l>;
+            rockchip,system-power-controller;
+            wakeup-source;
+            #clock-cells = <0>;
+
+            vcc1-supply = <&vcc_sys>;
+            vcc2-supply = <&vcc_sys>;
+            vcc3-supply = <&vcc_sys>;
+            vcc4-supply = <&vcc_sys>;
+            vcc5-supply = <&vcc_io>;
+            vcc6-supply = <&vcc_io>;
+
+            regulators {
+                vdd_logic: DCDC_REG1 {
+                    regulator-name = "vdd_logic";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vdd_arm: DCDC_REG2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <700000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <950000>;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc_io: DCDC_REG4 {
+                    regulator-name = "vcc_io";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vdd_18: LDO_REG1 {
+                    regulator-name = "vdd_18";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc18_emmc: LDO_REG2 {
+                    regulator-name = "vcc_18emmc";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_11: LDO_REG3 {
+                    regulator-name = "vdd_11";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1100000>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
new file mode 100644
index 000000000000..f5908fa01a61
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
@@ -0,0 +1,257 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk808.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK808 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK808 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, and a power button.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk808
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    const: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+    maxItems: 2
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG1 and LDO_REG2.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG3 and LDO_REG7.
+
+  vcc8-supply:
+    description:
+      The input supply for SWITCH_REG1.
+
+  vcc9-supply:
+    description:
+      The input supply for LDO_REG4 and LDO_REG5.
+
+  vcc10-supply:
+    description:
+      The input supply for LDO_REG6.
+
+  vcc11-supply:
+    description:
+      The input supply for LDO_REG8.
+
+  vcc12-supply:
+    description:
+      The input supply for SWITCH_REG2.
+
+  vddio-supply:
+    description:
+      The input supply for digital IO.
+
+  dvs-gpios:
+    description: |
+      buck1/2 can be controlled by gpio dvs, this is GPIO specifiers for
+      2 host gpio's used for dvs. The format of the gpio specifier
+      depends in the gpio controller. If DVS GPIOs aren't present,
+      voltage changes will happen very quickly with no slow ramp time.
+    maxItems: 2
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk808: pmic@1b {
+            compatible = "rockchip,rk808";
+            clock-output-names = "xin32k", "rk808-clkout2";
+            interrupt-parent = <&gpio0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>;
+            dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
+                <&gpio7 15 GPIO_ACTIVE_HIGH>;
+            reg = <0x1b>;
+            rockchip,system-power-controller;
+            wakeup-source;
+            #clock-cells = <1>;
+
+            vcc8-supply = <&vcc_18>;
+            vcc9-supply = <&vcc_io>;
+            vcc10-supply = <&vcc_io>;
+            vcc12-supply = <&vcc_io>;
+            vddio-supply = <&vccio_pmu>;
+
+            regulators {
+                vdd_cpu: DCDC_REG1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-name = "vdd_arm";
+                };
+
+                vdd_gpu: DCDC_REG2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-name = "vdd_gpu";
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-name = "vcc_ddr";
+                };
+
+                vcc_io: DCDC_REG4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vcc_io";
+                };
+
+                vccio_pmu: LDO_REG1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vccio_pmu";
+                };
+
+                vcc_tp: LDO_REG2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vcc_tp";
+                };
+
+                vdd_10: LDO_REG3 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-name = "vdd_10";
+                };
+
+                vcc18_lcd: LDO_REG4 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-name = "vcc18_lcd";
+                };
+
+                vccio_sd: LDO_REG5 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vccio_sd";
+                };
+
+                vdd10_lcd: LDO_REG6 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-name = "vdd10_lcd";
+                };
+
+                vcc_18: LDO_REG7 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-name = "vcc_18";
+                };
+
+                vcca_codec: LDO_REG8 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-name = "vcca_codec";
+                };
+
+                vcc_wl: SWITCH_REG1 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-name = "vcc_wl";
+                };
+
+                vcc_lcd: SWITCH_REG2 {
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-name = "vcc_lcd";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
new file mode 100644
index 000000000000..7fb849ac74a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml
@@ -0,0 +1,284 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK809 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, and power button.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk809
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description: |
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    minimum: 0
+    maximum: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc5-supply:
+    description:
+      The input supply for LDO_REG1, LDO_REG2, and LDO_REG3.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG4, LDO_REG5, and LDO_REG6.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG7, LDO_REG8, and LDO_REG9.
+
+  vcc8-supply:
+    description:
+      The input supply for SWITCH_REG1.
+
+  vcc9-supply:
+    description:
+      The input supply for DCDC_REG5 and SWITCH_REG2.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        '#clock-cells':
+          const: 0
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 1
+
+    else:
+      properties:
+        clock-output-names:
+          maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk808: pmic@1b {
+            compatible = "rockchip,rk808";
+            reg = <0x1b>;
+            #clock-cells = <1>;
+            clock-output-names = "xin32k", "rk808-clkout2";
+            interrupt-parent = <&gpio3>;
+            interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int_l_pin>;
+            rockchip,system-power-controller;
+            wakeup-source;
+
+            vcc1-supply = <&vcc_sysin>;
+            vcc2-supply = <&vcc_sysin>;
+            vcc3-supply = <&vcc_sysin>;
+            vcc4-supply = <&vcc_sysin>;
+            vcc6-supply = <&vcc_sysin>;
+            vcc7-supply = <&vcc_sysin>;
+            vcc8-supply = <&vcc3v3_sys>;
+            vcc9-supply = <&vcc_sysin>;
+            vcc10-supply = <&vcc_sysin>;
+            vcc11-supply = <&vcc_sysin>;
+            vcc12-supply = <&vcc3v3_sys>;
+
+            regulators {
+                vdd_center: DCDC_REG1 {
+                    regulator-name = "vdd_center";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_cpu_l: DCDC_REG2 {
+                    regulator-name = "vdd_cpu_l";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc_1v8: vcc_wl: DCDC_REG4 {
+                    regulator-name = "vcc_1v8";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc1v8_pmupll: LDO_REG3 {
+                    regulator-name = "vcc1v8_pmupll";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vcc_sdio: LDO_REG4 {
+                    regulator-name = "vcc_sdio";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3000000>;
+                    };
+                };
+
+                vcca3v0_codec: LDO_REG5 {
+                    regulator-name = "vcca3v0_codec";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc_1v5: LDO_REG6 {
+                    regulator-name = "vcc_1v5";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1500000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1500000>;
+                    };
+                };
+
+                vcca1v8_codec: LDO_REG7 {
+                    regulator-name = "vcca1v8_codec";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc_3v0: LDO_REG8 {
+                    regulator-name = "vcc_3v0";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3000000>;
+                    };
+                };
+
+                vcc3v3_s3: SWITCH_REG1 {
+                    regulator-name = "vcc3v3_s3";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vcc3v3_s0: SWITCH_REG2 {
+                    regulator-name = "vcc3v3_s0";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml
new file mode 100644
index 000000000000..269fb85b2027
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml
@@ -0,0 +1,384 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK817 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, a power button, an audio codec, and a
+  battery charger manager.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk817
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description:
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    minimum: 0
+    maximum: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  vcc5-supply:
+    description:
+      The input supply for LDO_REG1, LDO_REG2, and LDO_REG3.
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG4, LDO_REG5, and LDO_REG6.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG7, LDO_REG8, and LDO_REG9.
+
+  vcc8-supply:
+    description:
+      The input supply for BOOST.
+
+  vcc9-supply:
+    description:
+      The input supply for OTG_SWITCH.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$":
+        type: object
+        unevaluatedProperties: false
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+  clocks:
+    description:
+      The input clock for the audio codec.
+
+  clock-names:
+    description:
+      The clock name for the codec clock.
+    items:
+      - const: mclk
+
+  '#sound-dai-cells':
+    description:
+      Needed for the interpretation of sound dais.
+    const: 0
+
+  codec:
+    description: |
+      The child node for the codec to hold additional properties. If no
+      additional properties are required for the codec, this node can be
+      omitted.
+    type: object
+    additionalProperties: false
+    properties:
+      rockchip,mic-in-differential:
+        type: boolean
+        description:
+          Describes if the microphone uses differential mode.
+
+  charger:
+    description: |
+      The child node for the charger to hold additional properties. If a
+      battery is not in use, this node can be omitted.
+    type: object
+    $ref: /schemas/power/supply/power-supply.yaml
+
+    properties:
+      monitored-battery:
+        description: |
+          A phandle to a monitored battery node that contains a valid
+          value for:
+          charge-full-design-microamp-hours,
+          charge-term-current-microamp,
+          constant-charge-current-max-microamp,
+          constant-charge-voltage-max-microvolt,
+          voltage-max-design-microvolt,
+          voltage-min-design-microvolt,
+          and a valid ocv-capacity table.
+
+      rockchip,resistor-sense-micro-ohms:
+        description: |
+          Value in microohms of the battery sense resistor. This value is
+          used by the driver to set the correct divisor value to translate
+          ADC readings into the proper units of measure.
+        enum: [10000, 20000]
+
+      rockchip,sleep-enter-current-microamp:
+        description: |
+          Value in microamps of the sleep enter current for the charger.
+          Value is used by the driver to calibrate the relax threshold.
+
+      rockchip,sleep-filter-current-microamp:
+        description:
+          Value in microamps of the sleep filter current for the charger.
+          Value is used by the driver to derive the sleep sample current.
+
+    required:
+      - monitored-battery
+      - rockchip,resistor-sense-micro-ohms
+      - rockchip,sleep-enter-current-microamp
+      - rockchip,sleep-filter-current-microamp
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        '#clock-cells':
+          const: 0
+
+    then:
+      properties:
+        clock-output-names:
+          maxItems: 1
+
+    else:
+      properties:
+        clock-output-names:
+          maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk817: pmic@20 {
+            compatible = "rockchip,rk817";
+            reg = <0x20>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
+            clock-output-names = "rk808-clkout1", "xin32k";
+            clock-names = "mclk";
+            clocks = <&cru SCLK_I2S1_OUT>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
+            wakeup-source;
+            #clock-cells = <1>;
+            #sound-dai-cells = <0>;
+
+            vcc1-supply = <&vccsys>;
+            vcc2-supply = <&vccsys>;
+            vcc3-supply = <&vccsys>;
+            vcc4-supply = <&vccsys>;
+            vcc5-supply = <&vccsys>;
+            vcc6-supply = <&vccsys>;
+            vcc7-supply = <&vccsys>;
+
+            regulators {
+                vdd_logic: DCDC_REG1 {
+                    regulator-name = "vdd_logic";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1150000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <950000>;
+                    };
+                };
+
+                vdd_arm: DCDC_REG2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-ramp-delay = <6001>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <950000>;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vcc_3v3: DCDC_REG4 {
+                    regulator-name = "vcc_3v3";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_1v8: LDO_REG2 {
+                    regulator-name = "vcc_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_1v0: LDO_REG3 {
+                    regulator-name = "vdd_1v0";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vcc3v3_pmu: LDO_REG4 {
+                    regulator-name = "vcc3v3_pmu";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vccio_sd: LDO_REG5 {
+                    regulator-name = "vccio_sd";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_sd: LDO_REG6 {
+                    regulator-name = "vcc_sd";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_bl: LDO_REG7 {
+                    regulator-name = "vcc_bl";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vcc_lcd: LDO_REG8 {
+                    regulator-name = "vcc_lcd";
+                    regulator-min-microvolt = <2800000>;
+                    regulator-max-microvolt = <2800000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <2800000>;
+                    };
+                };
+
+                vcc_cam: LDO_REG9 {
+                    regulator-name = "vcc_cam";
+                    regulator-min-microvolt = <3000000>;
+                    regulator-max-microvolt = <3000000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <3000000>;
+                    };
+                };
+            };
+
+            rk817_charger: charger {
+                monitored-battery = <&battery>;
+                rockchip,resistor-sense-micro-ohms = <10000>;
+                rockchip,sleep-enter-current-microamp = <300000>;
+                rockchip,sleep-filter-current-microamp = <100000>;
+            };
+
+            rk817_codec: codec {
+                rockchip,mic-in-differential;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml
new file mode 100644
index 000000000000..b57c4b005cf4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rockchip,rk818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RK818 Power Management Integrated Circuit
+
+maintainers:
+  - Chris Zhong <zyw@rock-chips.com>
+  - Zhang Qing <zhangqing@rock-chips.com>
+
+description: |
+  Rockchip RK818 series PMIC. This device consists of an i2c controlled MFD
+  that includes regulators, an RTC, and a power button.
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk818
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  '#clock-cells':
+    description: |
+      See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
+    const: 1
+
+  clock-output-names:
+    description:
+      From common clock binding to override the default output clock name.
+    maxItems: 2
+
+  rockchip,system-power-controller:
+    type: boolean
+    description:
+      Telling whether or not this PMIC is controlling the system power.
+
+  wakeup-source:
+    type: boolean
+    description:
+      Device can be used as a wakeup source.
+
+  vcc1-supply:
+    description:
+      The input supply for DCDC_REG1.
+
+  vcc2-supply:
+    description:
+      The input supply for DCDC_REG2.
+
+  vcc3-supply:
+    description:
+      The input supply for DCDC_REG3.
+
+  vcc4-supply:
+    description:
+      The input supply for DCDC_REG4.
+
+  boost-supply:
+    description:
+      The input supply for DCDC_BOOST
+
+  vcc6-supply:
+    description:
+      The input supply for LDO_REG1 and LDO_REG2.
+
+  vcc7-supply:
+    description:
+      The input supply for LDO_REG3, LDO_REG5, and LDO_REG7.
+
+  vcc8-supply:
+    description:
+      The input supply for LDO_REG4, LDO_REG6, and LDO_REG8.
+
+  vcc9-supply:
+    description:
+      The input supply for LDO_REG9 and SWITCH_REG.
+
+  vddio-supply:
+    description:
+      The input supply for digital IO.
+
+  h_5v-supply:
+    description:
+      The input supply for HDMI_SWITCH.
+
+  usb-supply:
+    description:
+      The input supply for OTG_SWITCH.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+    #include <dt-bindings/pinctrl/rockchip.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rk818: pmic@1c {
+            compatible = "rockchip,rk818";
+            reg = <0x1c>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_int>;
+            rockchip,system-power-controller;
+            wakeup-source;
+            #clock-cells = <1>;
+
+            vcc1-supply = <&vdd_sys>;
+            vcc2-supply = <&vdd_sys>;
+            vcc3-supply = <&vdd_sys>;
+            vcc4-supply = <&vdd_sys>;
+            boost-supply = <&vdd_in_otg_out>;
+            vcc6-supply = <&vdd_sys>;
+            vcc7-supply = <&vdd_misc_1v8>;
+            vcc8-supply = <&vdd_misc_1v8>;
+            vcc9-supply = <&vdd_3v3_io>;
+            vddio-supply = <&vdd_3v3_io>;
+
+            regulators {
+                vdd_log: DCDC_REG1 {
+                    regulator-name = "vdd_log";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_gpu: DCDC_REG2 {
+                    regulator-name = "vdd_gpu";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1250000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vcc_ddr: DCDC_REG3 {
+                    regulator-name = "vcc_ddr";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                vdd_3v3_io: DCDC_REG4 {
+                    regulator-name = "vdd_3v3_io";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <3300000>;
+                    };
+                };
+
+                vdd_sys: DCDC_BOOST {
+                    regulator-name = "vdd_sys";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <5000000>;
+                    regulator-max-microvolt = <5000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <5000000>;
+                    };
+                };
+
+                vdd_sd: SWITCH_REG {
+                    regulator-name = "vdd_sd";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                vdd_eth_2v5: LDO_REG2 {
+                    regulator-name = "vdd_eth_2v5";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <2500000>;
+                    regulator-max-microvolt = <2500000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <2500000>;
+                    };
+                };
+
+                vdd_1v0: LDO_REG3 {
+                    regulator-name = "vdd_1v0";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vdd_1v8_lcd_ldo: LDO_REG4 {
+                    regulator-name = "vdd_1v8_lcd_ldo";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_1v0_lcd: LDO_REG6 {
+                    regulator-name = "vdd_1v0_lcd";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                        regulator-suspend-microvolt = <1000000>;
+                    };
+                };
+
+                vdd_1v8_ldo: LDO_REG7 {
+                    regulator-name = "vdd_1v8_ldo";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                        regulator-suspend-microvolt = <1800000>;
+                    };
+                };
+
+                vdd_io_sd: LDO_REG9 {
+                    regulator-name = "vdd_io_sd";
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
deleted file mode 100644
index 386eec06cf08..000000000000
--- a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-* ROHM BD70528 Power Management Integrated Circuit bindings
-
-BD70528MWV is an ultra-low quiescent current general purpose, single-chip,
-power management IC for battery-powered portable devices. The IC
-integrates 3 ultra-low current consumption buck converters, 3 LDOs and 2
-LED Drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz
-clock gate, high-accuracy VREF for use with an external ADC, flexible
-dual-input power path, 10 bit SAR ADC for battery temperature monitor and
-1S battery charger with scalable charge currents.
-
-Required properties:
- - compatible		: Should be "rohm,bd70528"
- - reg			: I2C slave address.
- - interrupts		: The interrupt line the device is connected to.
- - interrupt-controller	: To indicate BD70528 acts as an interrupt controller.
- - #interrupt-cells	: Should be 2. Usage is compliant to the 2 cells
-			  variant of ../interrupt-controller/interrupts.txt
- - gpio-controller	: To indicate BD70528 acts as a GPIO controller.
- - #gpio-cells		: Should be 2. The first cell is the pin number and
-			  the second cell is used to specify flags. See
-			  ../gpio/gpio.txt for more information.
- - #clock-cells		: Should be 0.
- - regulators:		: List of child nodes that specify the regulators.
-			  Please see ../regulator/rohm,bd70528-regulator.txt
-
-Optional properties:
- - clock-output-names	: Should contain name for output clock.
-
-Example:
-/* External oscillator */
-osc: oscillator {
-	compatible = "fixed-clock";
-	#clock-cells = <1>;
-	clock-frequency  = <32768>;
-	clock-output-names = "osc";
-};
-
-pmic: pmic@4b {
-	compatible = "rohm,bd70528";
-	reg = <0x4b>;
-	interrupt-parent = <&gpio1>;
-	interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
-	clocks = <&osc 0>;
-	#clock-cells = <0>;
-	clock-output-names = "bd70528-32k-out";
-	#gpio-cells = <2>;
-	gpio-controller;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-
-	regulators {
-		buck1: BUCK1 {
-			regulator-name = "buck1";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3400000>;
-			regulator-boot-on;
-			regulator-ramp-delay = <125>;
-		};
-		buck2: BUCK2 {
-			regulator-name = "buck2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-ramp-delay = <125>;
-		};
-		buck3: BUCK3 {
-			regulator-name = "buck3";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
-			regulator-ramp-delay = <250>;
-		};
-		ldo1: LDO1 {
-			regulator-name = "ldo1";
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
-		ldo2: LDO2 {
-			regulator-name = "ldo2";
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-		};
-
-		ldo3: LDO3 {
-			regulator-name = "ldo3";
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <3300000>;
-		};
-		led_ldo1: LED_LDO1 {
-			regulator-name = "led_ldo1";
-			regulator-min-microvolt = <200000>;
-			regulator-max-microvolt = <300000>;
-		};
-		led_ldo2: LED_LDO2 {
-			regulator-name = "led_ldo2";
-			regulator-min-microvolt = <200000>;
-			regulator-max-microvolt = <300000>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
index fe265bcab50d..05747e012516 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mfd/rohm,bd71815-pmic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM BD71815 Power Management Integrated Circuit bindings
+title: ROHM BD71815 Power Management Integrated Circuit
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   BD71815AGW is a single-chip power management ICs for battery-powered
@@ -46,7 +46,7 @@ properties:
 
   rohm,clkout-open-drain:
     description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 1
 
@@ -74,7 +74,7 @@ properties:
   rohm,enable-hidden-gpo:
     description: |
       The BD71815 has undocumented GPO at pin E5. Pin is marked as GND at the
-      data-sheet as it's location in the middle of GND pins makes it hard to
+      data-sheet as its location in the middle of GND pins makes it hard to
       use on PCB. If your board has managed to use this pin you can enable the
       second GPO by defining this property. Dont enable this if you are unsure
       about how the E5 pin is connected on your board.
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
index 8380166d176c..11089aa89ec6 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM BD71828 Power Management Integrated Circuit bindings
+title: ROHM BD71828 Power Management Integrated Circuit
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   BD71828GW is a single-chip power management IC for battery-powered portable
@@ -46,7 +46,7 @@ properties:
 
   rohm,clkout-open-drain:
     description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 1
 
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
index 3bfdd33702ad..7aa343f58cb6 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mfd/rohm,bd71837-pmic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM BD71837 Power Management Integrated Circuit bindings
+title: ROHM BD71837 Power Management Integrated Circuit
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   BD71837MWV is programmable Power Management ICs for powering single-core,
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
index 5d531051a153..7ab7b2c7f3e6 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mfd/rohm,bd71847-pmic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM BD71847 and BD71850 Power Management Integrated Circuit bindings
+title: ROHM BD71847 and BD71850 Power Management Integrated Circuit
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   BD71847AMWV and BD71850MWV are programmable Power Management ICs for powering
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml
new file mode 100644
index 000000000000..89f9efee465b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd9571mwv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Marek Vasut <marek.vasut@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - rohm,bd9571mwv
+      - rohm,bd9574mwf
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  rohm,ddr-backup-power:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0xf
+    description: |
+      Value to use for DDR-Backup Power (default 0).
+      This is a bitmask that specifies which DDR power rails need to be kept
+      powered when backup mode is entered, for system suspend:
+        - bit 0: DDR0
+        - bit 1: DDR1
+        - bit 2: DDR0C
+        - bit 3: DDR1C
+      These bits match the KEEPON_DDR* bits in the documentation for the "BKUP
+      Mode Cnt" register.
+
+  rohm,rstbmode-level:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The RSTB signal is configured for level mode, to accommodate a toggle
+      power switch (the RSTBMODE pin is strapped low).
+
+  rohm,rstbmode-pulse:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The RSTB signal is configured for pulse mode, to accommodate a momentary
+      power switch (the RSTBMODE pin is strapped high).
+
+  regulators:
+    type: object
+    description:
+      List of child nodes that specify the regulator initialization data.
+      Child nodes must be named after their hardware counterparts.
+
+    patternProperties:
+      "^(vd09|vd18|vd25|vd33|dvfs)$":
+        type: object
+        $ref: ../regulator/regulator.yaml#
+
+        properties:
+          regulator-name:
+            pattern: "^(vd09|vd18|vd25|vd33|dvfs)$"
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+oneOf:
+  - required:
+      - rohm,rstbmode-level
+  - required:
+      - rohm,rstbmode-pulse
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pmic: pmic@30 {
+                  compatible = "rohm,bd9571mwv";
+                  reg = <0x30>;
+                  interrupt-parent = <&gpio2>;
+                  interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+                  interrupt-controller;
+                  #interrupt-cells = <2>;
+                  gpio-controller;
+                  #gpio-cells = <2>;
+                  rohm,ddr-backup-power = <0xf>;
+                  rohm,rstbmode-pulse;
+
+                  regulators {
+                          dvfs: dvfs {
+                                  regulator-name = "dvfs";
+                                  regulator-min-microvolt = <750000>;
+                                  regulator-max-microvolt = <1030000>;
+                                  regulator-boot-on;
+                                  regulator-always-on;
+                          };
+                  };
+          };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
index 6483860da955..10f207a38178 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mfd/rohm,bd9576-pmic.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: ROHM BD9576MUF and BD9573MUF Power Management Integrated Circuit bindings
+title: ROHM BD9576MUF and BD9573MUF Power Management Integrated Circuit
 
 maintainers:
-  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Matti Vaittinen <mazziesaccount@gmail.com>
 
 description: |
   BD9576MUF and BD9573MUF are power management ICs primarily intended for
diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
deleted file mode 100644
index 30ea27c3936d..000000000000
--- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-Samsung Exynos SoC Low Power Audio Subsystem (LPASS)
-
-Required properties:
-
- - compatible		: "samsung,exynos5433-lpass"
- - reg			: should contain the LPASS top SFR region location
-			  and size
- - clock-names		: should contain following required clocks: "sfr0_ctrl"
- - clocks		: should contain clock specifiers of all clocks, which
-			  input names have been specified in clock-names
-			  property, in same order.
- - #address-cells	: should be 1
- - #size-cells		: should be 1
- - ranges		: must be present
-
-Each IP block of the Low Power Audio Subsystem should be specified as
-an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes:
-UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices.
-
-Bindings of the sub-nodes are described in:
-  ../serial/samsung_uart.yaml
-  ../sound/samsung-i2s.txt
-  ../dma/arm-pl330.txt
-
-
-Example:
-
-audio-subsystem {
-	compatible = "samsung,exynos5433-lpass";
-	reg = <0x11400000 0x100>, <0x11500000 0x08>;
-	clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
-	clock-names = "sfr0_ctrl";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	adma: adma@11420000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x11420000 0x1000>;
-		interrupts = <0 73 0>;
-		clocks = <&cmu_aud CLK_ACLK_DMAC>;
-		clock-names = "apb_pclk";
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <32>;
-	};
-
-	i2s0: i2s0@11440000 {
-		compatible = "samsung,exynos7-i2s";
-		reg = <0x11440000 0x100>;
-		dmas = <&adma 0 &adma 2>;
-		dma-names = "tx", "rx";
-		interrupts = <0 70 0>;
-		clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
-			 <&cmu_aud CLK_SCLK_AUD_I2S>,
-			 <&cmu_aud CLK_SCLK_I2S_BCLK>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-	};
-
-	serial_3: serial@11460000 {
-		compatible = "samsung,exynos5433-uart";
-		reg = <0x11460000 0x100>;
-		interrupts = <0 67 0>;
-		clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
-			 <&cmu_aud CLK_SCLK_AUD_UART>;
-		clock-names = "uart", "clk_uart_baud0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart_aud_bus>;
-	};
- };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml
new file mode 100644
index 000000000000..b97b06848729
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,exynos5433-lpass.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC Low Power Audio Subsystem (LPASS)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+  compatible:
+    const: samsung,exynos5433-lpass
+
+  '#address-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sfr0_ctrl
+
+  power-domains:
+    maxItems: 1
+
+  ranges: true
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^dma-controller@[0-9a-f]+$":
+    $ref: /schemas/dma/arm,pl330.yaml
+
+  "^i2s@[0-9a-f]+$":
+    $ref: /schemas/sound/samsung-i2s.yaml
+
+  "^serial@[0-9a-f]+$":
+    $ref: /schemas/serial/samsung_uart.yaml
+
+required:
+  - compatible
+  - '#address-cells'
+  - clocks
+  - clock-names
+  - ranges
+  - reg
+  - '#size-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    audio-subsystem@11400000 {
+        compatible = "samsung,exynos5433-lpass";
+        reg = <0x11400000 0x100>, <0x11500000 0x08>;
+        clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
+        clock-names = "sfr0_ctrl";
+        power-domains = <&pd_aud>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        dma-controller@11420000 {
+            compatible = "arm,pl330", "arm,primecell";
+            reg = <0x11420000 0x1000>;
+            interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cmu_aud CLK_ACLK_DMAC>;
+            clock-names = "apb_pclk";
+            #dma-cells = <1>;
+            dma-channels = <8>;
+            dma-requests = <32>;
+            power-domains = <&pd_aud>;
+        };
+
+        i2s@11440000 {
+            compatible = "samsung,exynos7-i2s";
+            reg = <0x11440000 0x100>;
+            dmas = <&adma 0>, <&adma 2>;
+            dma-names = "tx", "rx";
+            interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            clocks = <&cmu_aud CLK_PCLK_AUD_I2S>,
+                     <&cmu_aud CLK_SCLK_AUD_I2S>,
+                     <&cmu_aud CLK_SCLK_I2S_BCLK>;
+            clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+            #clock-cells = <1>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&i2s0_bus>;
+            power-domains = <&pd_aud>;
+            #sound-dai-cells = <1>;
+        };
+
+        serial@11460000 {
+            compatible = "samsung,exynos5433-uart";
+            reg = <0x11460000 0x100>;
+            interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&cmu_aud CLK_PCLK_AUD_UART>,
+                     <&cmu_aud CLK_SCLK_AUD_UART>;
+            clock-names = "uart", "clk_uart_baud0";
+            pinctrl-names = "default";
+            pinctrl-0 = <&uart_aud_bus>;
+            power-domains = <&pd_aud>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml
new file mode 100644
index 000000000000..055dfc337c2f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s2mpa01.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPA01 Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The Samsung S2MPA01 is a Power Management IC which includes voltage
+  and current regulators, RTC, clock outputs and other sub-blocks.
+
+properties:
+  compatible:
+    const: samsung,s2mpa01-pmic
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    $ref: ../regulator/samsung,s2mpa01.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s2mpa01-pmic";
+            reg = <0x66>;
+
+            regulators {
+                ldo1_reg: LDO1 {
+                    regulator-name = "VDD_ALIVE";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                };
+
+                ldo2_reg: LDO2 {
+                    regulator-name = "VDDQ_MMC2";
+                    regulator-min-microvolt = <2800000>;
+                    regulator-max-microvolt = <2800000>;
+                    regulator-always-on;
+                };
+
+                // ...
+
+                buck1_reg: BUCK1 {
+                    regulator-name = "vdd_mif";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                };
+
+                buck2_reg: BUCK2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-ramp-delay = <50000>;
+                };
+
+                // ...
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
new file mode 100644
index 000000000000..5ff6546c72b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
@@ -0,0 +1,267 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s2mps11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S2MPS11/13/14/15 and S2MPU02 Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The Samsung S2MPS11/13/14/15 and S2MPU02 is a family of Power Management IC
+  which include voltage and current regulators, RTC, clock outputs and other
+  sub-blocks.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s2mps11-pmic
+      - samsung,s2mps13-pmic
+      - samsung,s2mps14-pmic
+      - samsung,s2mps15-pmic
+      - samsung,s2mpu02-pmic
+
+  clocks:
+    $ref: ../clock/samsung,s2mps11.yaml
+    description:
+      Child node describing clock provider.
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description:
+      List of child nodes that specify the regulators.
+
+  samsung,s2mps11-acokb-ground:
+    description: |
+      Indicates that ACOKB pin of S2MPS11 PMIC is connected to the ground so
+      the PMIC must manually set PWRHOLD bit in CTRL1 register to turn off the
+      power. Usually the ACOKB is pulled up to VBATT so when PWRHOLD pin goes
+      low, the rising ACOKB will trigger power off.
+    type: boolean
+
+  samsung,s2mps11-wrstbi-ground:
+    description: |
+      Indicates that WRSTBI pin of PMIC is pulled down. When the system is
+      suspended it will always go down thus triggerring unwanted buck warm
+      reset (setting buck voltages to default values).
+    type: boolean
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps11-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps11.yaml
+        samsung,s2mps11-wrstbi-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps13-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps13.yaml
+        samsung,s2mps11-acokb-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps14-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps14.yaml
+        samsung,s2mps11-acokb-ground: false
+        samsung,s2mps11-wrstbi-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mps15-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mps15.yaml
+        samsung,s2mps11-acokb-ground: false
+        samsung,s2mps11-wrstbi-ground: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,s2mpu02-pmic
+    then:
+      properties:
+        regulators:
+          $ref: ../regulator/samsung,s2mpu02.yaml
+        samsung,s2mps11-acokb-ground: false
+        samsung,s2mps11-wrstbi-ground: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s2mps11-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx0>;
+            interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&s2mps11_irq>;
+            samsung,s2mps11-acokb-ground;
+            wakeup-source;
+
+            clocks {
+                compatible = "samsung,s2mps11-clk";
+                #clock-cells = <1>;
+                clock-output-names = "s2mps11_ap", "s2mps11_cp", "s2mps11_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "vdd_ldo1";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+                };
+
+                LDO4 {
+                    regulator-name = "vdd_adc";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ....
+
+                BUCK1 {
+                    regulator-name = "vdd_mif";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1300000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK2 {
+                    regulator-name = "vdd_arm";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1500000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-coupled-with = <&buck3_reg>;
+                    regulator-coupled-max-spread = <300000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                BUCK3 {
+                    regulator-name = "vdd_int";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1400000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    regulator-coupled-with = <&buck2_reg>;
+                    regulator-coupled-max-spread = <300000>;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ...
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s2mps14-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx0>;
+            interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+            wakeup-source;
+
+            clocks {
+                compatible = "samsung,s2mps14-clk";
+                #clock-cells = <1>;
+                clock-output-names = "s2mps14_ap", "unused", "s2mps14_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VLDO1_1.0V";
+                    regulator-min-microvolt = <1000000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+
+                    regulator-state-mem {
+                        regulator-on-in-suspend;
+                    };
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "VBUCK1_1.0V";
+                    regulator-min-microvolt = <800000>;
+                    regulator-max-microvolt = <1000000>;
+                    regulator-always-on;
+
+                    regulator-state-mem {
+                        regulator-off-in-suspend;
+                    };
+                };
+
+                // ...
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
new file mode 100644
index 000000000000..10c7b408f33a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
@@ -0,0 +1,307 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/samsung,s5m8767.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5M8767 Power Management IC
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  This is a part of device tree bindings for S2M and S5M family of Power
+  Management IC (PMIC).
+
+  The Samsung S5M8767 is a Power Management IC which includes voltage
+  and current regulators, RTC, clock outputs and other sub-blocks.
+
+properties:
+  compatible:
+    const: samsung,s5m8767-pmic
+
+  clocks:
+    $ref: ../clock/samsung,s2mps11.yaml
+    description:
+      Child node describing clock provider.
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    $ref: ../regulator/samsung,s5m8767.yaml
+    description:
+      List of child nodes that specify the regulators.
+
+  s5m8767,pmic-buck2-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 8
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck2 when
+      changing voltage using gpio dvs.
+
+  s5m8767,pmic-buck3-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 8
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck3 when
+      changing voltage using gpio dvs.
+
+  s5m8767,pmic-buck4-dvs-voltage:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 8
+    maxItems: 8
+    description: |
+      A set of 8 voltage values in micro-volt (uV) units for buck4 when
+      changing voltage using gpio dvs.
+
+  s5m8767,pmic-buck-ds-gpios:
+    minItems: 3
+    maxItems: 3
+    description: |
+      GPIO specifiers for three host gpio's used for selecting GPIO DVS lines.
+      It is one-to-one mapped to dvs gpio lines.
+
+  s5m8767,pmic-buck2-uses-gpio-dvs:
+    type: boolean
+    description: buck2 can be controlled by gpio dvs.
+
+  s5m8767,pmic-buck3-uses-gpio-dvs:
+    type: boolean
+    description: buck3 can be controlled by gpio dvs.
+
+  s5m8767,pmic-buck4-uses-gpio-dvs:
+    type: boolean
+    description: buck4 can be controlled by gpio dvs.
+
+  s5m8767,pmic-buck-default-dvs-idx:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minimum: 0
+    maximum: 7
+    default: 0
+    description: |
+      Default voltage setting selected from the possible 8 options selectable
+      by the dvs gpios. The value of this property should be between 0 and 7.
+      If not specified or if out of range, the default value of this property
+      is set to 0.
+
+  s5m8767,pmic-buck-dvs-gpios:
+    minItems: 3
+    maxItems: 3
+    description: |
+      GPIO specifiers for three host gpio's used for dvs.
+
+  vinb1-supply:
+    description: Power supply for buck1
+  vinb2-supply:
+    description: Power supply for buck2
+  vinb3-supply:
+    description: Power supply for buck3
+  vinb4-supply:
+    description: Power supply for buck4
+  vinb5-supply:
+    description: Power supply for buck5
+  vinb6-supply:
+    description: Power supply for buck6
+  vinb7-supply:
+    description: Power supply for buck7
+  vinb8-supply:
+    description: Power supply for buck8
+  vinb9-supply:
+    description: Power supply for buck9
+
+  vinl1-supply:
+    description: Power supply for LDO3, LDO10, LDO26, LDO27
+  vinl2-supply:
+    description: Power supply for LDO13, LDO16, LDO25, LDO28
+  vinl3-supply:
+    description: Power supply for LDO11, LDO14
+  vinl4-supply:
+    description: Power supply for LDO4, LDO9
+  vinl5-supply:
+    description: Power supply for LDO12, LDO17, LDO19, LDO23
+  vinl6-supply:
+    description: Power supply for LDO18, LDO20, LDO21, LDO24
+  vinl7-supply:
+    description: Power supply for LDO5, LDO22
+  vinl8-supply:
+    description: Power supply for LDO1, LDO6, LDO7, LDO8, LDO15
+  vinl9-supply:
+    description: Power supply for LDO2
+
+  wakeup-source: true
+
+required:
+  - compatible
+  - reg
+  - regulators
+  - s5m8767,pmic-buck-ds-gpios
+
+dependencies:
+  s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+  s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+  s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
+  s5m8767,pmic-buck2-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck2-dvs-voltage' ]
+  s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage' ]
+  s5m8767,pmic-buck4-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck4-dvs-voltage' ]
+
+additionalProperties: false
+
+allOf:
+  - if:
+      required:
+        - s5m8767,pmic-buck2-uses-gpio-dvs
+    then:
+      properties:
+        s5m8767,pmic-buck3-uses-gpio-dvs: false
+        s5m8767,pmic-buck4-uses-gpio-dvs: false
+
+  - if:
+      required:
+        - s5m8767,pmic-buck3-uses-gpio-dvs
+    then:
+      properties:
+        s5m8767,pmic-buck2-uses-gpio-dvs: false
+        s5m8767,pmic-buck4-uses-gpio-dvs: false
+
+  - if:
+      required:
+        - s5m8767,pmic-buck4-uses-gpio-dvs
+    then:
+      properties:
+        s5m8767,pmic-buck2-uses-gpio-dvs: false
+        s5m8767,pmic-buck3-uses-gpio-dvs: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s5m8767-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx3>;
+            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+            wakeup-source;
+
+            s5m8767,pmic-buck-default-dvs-idx = <3>;
+            s5m8767,pmic-buck2-uses-gpio-dvs;
+
+            s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>,
+                                          <&gpd1 1 GPIO_ACTIVE_LOW>,
+                                          <&gpd1 2 GPIO_ACTIVE_LOW>;
+
+            s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 4 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 5 GPIO_ACTIVE_LOW>;
+
+            s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+                                             <1250000>, <1200000>,
+                                             <1150000>, <1100000>,
+                                             <1000000>, <950000>;
+
+            s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+                                             <1100000>, <1100000>,
+                                             <1000000>, <1000000>,
+                                             <1000000>, <1000000>;
+
+            s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+                                             <1200000>, <1200000>,
+                                             <1200000>, <1200000>,
+                                             <1200000>, <1200000>;
+
+            clocks {
+                compatible = "samsung,s5m8767-clk";
+                #clock-cells = <1>;
+                clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VDD_ALIVE";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                // ...
+
+                BUCK1 {
+                    regulator-name = "VDD_MIF";
+                    regulator-min-microvolt = <950000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                BUCK2 {
+                    regulator-name = "VDD_ARM";
+                    regulator-min-microvolt = <900000>;
+                    regulator-max-microvolt = <1350000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                // ...
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@66 {
+            compatible = "samsung,s5m8767-pmic";
+            reg = <0x66>;
+
+            interrupt-parent = <&gpx3>;
+            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+            wakeup-source;
+
+            s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 4 GPIO_ACTIVE_LOW>,
+                                         <&gpx2 5 GPIO_ACTIVE_LOW>;
+
+            clocks {
+                compatible = "samsung,s5m8767-clk";
+                #clock-cells = <1>;
+                clock-output-names = "en32khz_ap", "en32khz_cp", "en32khz_bt";
+            };
+
+            regulators {
+                LDO1 {
+                    regulator-name = "VDD_ALIVE";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-always-on;
+                    regulator-boot-on;
+                    op_mode = <1>; /* Normal Mode */
+                };
+
+                // ...
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt b/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
deleted file mode 100644
index c68cdd365153..000000000000
--- a/Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
+++ /dev/null
@@ -1,86 +0,0 @@
-Binding for Samsung S2M and S5M family multi-function device
-============================================================
-
-This is a part of device tree bindings for S2M and S5M family multi-function
-devices.
-
-The Samsung S2MPA01, S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family
-of multi-function devices which include voltage and current regulators, RTC,
-charger controller, clock outputs and other sub-blocks. It is interfaced
-to the host controller using an I2C interface. Each sub-block is usually
-addressed by the host system using different I2C slave addresses.
-
-
-This document describes bindings for main device node. Optional sub-blocks
-must be a sub-nodes to it. Bindings for them can be found in:
- - bindings/regulator/samsung,s2mpa01.txt
- - bindings/regulator/samsung,s2mps11.txt
- - bindings/regulator/samsung,s5m8767.txt
- - bindings/clock/samsung,s2mps11.txt
-
-
-Required properties:
- - compatible: Should be one of the following
-	- "samsung,s2mpa01-pmic",
-	- "samsung,s2mps11-pmic",
-	- "samsung,s2mps13-pmic",
-	- "samsung,s2mps14-pmic",
-	- "samsung,s2mps15-pmic",
-	- "samsung,s2mpu02-pmic",
-	- "samsung,s5m8767-pmic".
- - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
-
-Optional properties:
- - interrupts: Interrupt specifiers for interrupt sources.
- - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
-   down. When the system is suspended it will always go down thus triggerring
-   unwanted buck warm reset (setting buck voltages to default values).
- - samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
-   connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
-   register to turn off the power. Usually the ACOKB is pulled up to VBATT so
-   when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
-
-Example:
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-
-		s2m_osc: clocks {
-			compatible = "samsung,s2mps11-clk";
-			#clock-cells = <1>;
-			clock-output-names = "xx", "yy", "zz";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "VDD_ABB_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_ALIVE_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-ramp-delay = <50000>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
new file mode 100644
index 000000000000..ee0be32ac020
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/silergy,sy7636a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: silergy sy7636a PMIC
+
+maintainers:
+  - Alistair Francis <alistair@alistair23.me>
+
+properties:
+  compatible:
+    const: silergy,sy7636a
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  epd-pwr-good-gpios:
+    description:
+      Specifying the power good GPIOs.
+    maxItems: 1
+
+  regulators:
+    type: object
+
+    properties:
+      compatible:
+        const: silergy,sy7636a-regulator
+
+      vcom:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+        description:
+          The regulator for the compenstation voltage. Enabling/disabling this
+          enables/disables the entire device.
+        properties:
+          regulator-name:
+            const: vcom
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@62 {
+        compatible = "silergy,sy7636a";
+        reg = <0x62>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_epdpmic>;
+        #thermal-sensor-cells = <0>;
+
+        regulators {
+          reg_epdpmic: vcom {
+            regulator-name = "vcom";
+            regulator-boot-on;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml
new file mode 100644
index 000000000000..996bd4a17ca3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/sprd,ums512-glbreg.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/sprd,ums512-glbreg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc System Global Register
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description:
+  Unisoc system global registers provide register map
+  for clocks and some multimedia modules of the SoC.
+
+properties:
+  compatible:
+    items:
+      - const: sprd,ums512-glbregs
+      - const: syscon
+      - const: simple-mfd
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  "^clock-controller@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/clock/sprd,ums512-clk.yaml#
+    description:
+      Clock controller for the SoC clocks.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ap_apb_regs: syscon@71000000 {
+      compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd";
+      reg = <0x71000000 0x3000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0 0x71000000 0x3000>;
+
+      clock-controller@0 {
+        compatible = "sprd,ums512-apahb-gate";
+        reg = <0x0 0x2000>;
+        #clock-cells = <1>;
+      };
+    };
+
+  - |
+    ap_intc5_regs: syscon@32360000 {
+      compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd";
+      reg = <0x32360000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
index 8bcea8dd7d90..27329c5dc38e 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/st,stm32-lptimer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Low-Power Timers bindings
+title: STMicroelectronics STM32 Low-Power Timers
 
 description: |
   The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several
@@ -17,7 +17,7 @@ description: |
      - simple counter from IN1 input signal.
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 properties:
   compatible:
@@ -46,6 +46,7 @@ properties:
 
   pwm:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -58,43 +59,46 @@ properties:
       - "#pwm-cells"
       - compatible
 
-patternProperties:
-  "^trigger@[0-9]+$":
+  counter:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
-        const: st,stm32-lptimer-trigger
-
-      reg:
-        description: Identify trigger hardware block.
-        items:
-          minimum: 0
-          maximum: 2
+        const: st,stm32-lptimer-counter
 
     required:
       - compatible
-      - reg
 
-  counter:
+  timer:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
-        const: st,stm32-lptimer-counter
+        const: st,stm32-lptimer-timer
 
     required:
       - compatible
 
-  timer:
+patternProperties:
+  "^trigger@[0-9]+$":
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
-        const: st,stm32-lptimer-timer
+        const: st,stm32-lptimer-trigger
+
+      reg:
+        description: Identify trigger hardware block.
+        items:
+          minimum: 0
+          maximum: 2
 
     required:
       - compatible
+      - reg
 
 required:
   - "#address-cells"
diff --git a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
index dace35362a7a..f84e09a5743b 100644
--- a/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stm32-timers.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/st,stm32-timers.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Timers bindings
+title: STMicroelectronics STM32 Timers
 
 description: |
   This hardware block provides 3 types of timer along with PWM functionality:
@@ -17,8 +17,7 @@ description: |
       programmable prescaler.
 
 maintainers:
-  - Benjamin Gaignard <benjamin.gaignard@st.com>
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 properties:
   compatible:
@@ -34,7 +33,7 @@ properties:
     items:
       - const: int
 
-  reset:
+  resets:
     maxItems: 1
 
   dmas:
@@ -47,6 +46,21 @@ properties:
     minItems: 1
     maxItems: 7
 
+  interrupts:
+    oneOf:
+      - maxItems: 1
+      - maxItems: 4
+
+  interrupt-names:
+    oneOf:
+      - items:
+          - const: global
+      - items:
+          - const: brk
+          - const: up
+          - const: trg-com
+          - const: cc
+
   "#address-cells":
     const: 1
 
@@ -55,6 +69,7 @@ properties:
 
   pwm:
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -88,9 +103,21 @@ properties:
       - "#pwm-cells"
       - compatible
 
+  counter:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: st,stm32-timer-counter
+
+    required:
+      - compatible
+
 patternProperties:
   "^timer@[0-9]+$":
     type: object
+    additionalProperties: false
 
     properties:
       compatible:
@@ -108,16 +135,6 @@ patternProperties:
       - compatible
       - reg
 
-  counter:
-    type: object
-
-    properties:
-      compatible:
-        const: st,stm32-timer-counter
-
-    required:
-      - compatible
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
index 19e9afb385ac..76551c90b128 100644
--- a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/st,stmfx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectonics Multi-Function eXpander (STMFX) bindings
+title: STMicroelectonics Multi-Function eXpander (STMFX)
 
 description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for
                communication with the main MCU. Its main features are GPIO expansion,
@@ -12,7 +12,7 @@ description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C
                through VDD) and resistive touchscreen controller.
 
 maintainers:
-  - Amelie Delaunay <amelie.delaunay@st.com>
+  - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
 properties:
   compatible:
@@ -57,6 +57,7 @@ properties:
     patternProperties:
       "^[a-zA-Z]*-pins$":
         type: object
+        additionalProperties: false
 
         allOf:
           - $ref: ../pinctrl/pinmux-node.yaml
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
index 305123e74a58..9573e4af949e 100644
--- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
@@ -4,12 +4,12 @@
 $id: http://devicetree.org/schemas/mfd/st,stpmic1.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectonics STPMIC1 Power Management IC bindings
+title: STMicroelectonics STPMIC1 Power Management IC
 
 description: STMicroelectronics STPMIC1 Power Management IC
 
 maintainers:
-  - pascal Paillet <p.paillet@st.com>
+  - pascal Paillet <p.paillet@foss.st.com>
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
new file mode 100644
index 000000000000..6c8d42f27fe8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
@@ -0,0 +1,522 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/stericsson,ab8500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST-Ericsson Analog Baseband AB8500 and AB8505
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  the AB8500 "Analog Baseband" is the mixed-signals integrated circuit
+  handling power management (regulators), analog-to-digital conversion
+  (ADC), battery charging, fuel gauging of the battery, battery-backed
+  RTC, PWM, USB PHY and some GPIO lines in the ST-Ericsson U8500 platforms
+  in connection with the DB8500 digital baseband. The DB8500 PRCMU
+  communicates directly and autonomously with the AB8500 and thus it
+  appears as a subnode of the DB8500 PRCMU. An altered version called
+  AB8505 also exist, the difference in AB8505 is that some of the USB and
+  USB charging handling has changed, and it has an embedded USB-to-serial
+  converter. Most subblocks takes their interrupts directly from the
+  AB8500 embedded interrupt controller.
+
+properties:
+  $nodename:
+    pattern: '^ab850[05]$'
+
+  compatible:
+    enum:
+      - stericsson,ab8500
+      - stericsson,ab8505
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  # Some subnodes use a reg, some don't. Those that do use a single cell.
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  clock-controller:
+    description: Node describing the AB8500 clock controller. This
+      provides the reference clock for the entire U8500 system and
+      the DB8500 counterpart.
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-clk
+
+      '#clock-cells':
+        const: 1
+
+  gpio:
+    description: Node describing the AB8500 GPIO controller. A few
+      GPIO pins available for misc usage.
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        enum:
+          - stericsson,ab8500-gpio
+          - stericsson,ab8505-gpio
+
+      gpio-controller: true
+
+      '#gpio-cells':
+        const: 2
+
+  rtc:
+    description: Node describing the AB8500 battery-backed RTC.
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-rtc
+
+      interrupts:
+        items:
+          - description: 60 second interval alarm interrupt
+          - description: RTC alarm
+
+      interrupt-names:
+        items:
+          - const: 60S
+          - const: ALARM
+
+  adc:
+    description: Node describing the AB8500 general purpose analog to digital
+      converter, GPADC.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-gpadc
+
+      # AB8505 only supports one (software) EOC interrupt
+      interrupts:
+        minItems: 1
+        maxItems: 2
+
+      interrupt-names: true
+
+      vddadc-supply: true
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      '#io-channel-cells':
+        const: 1
+
+    patternProperties:
+      "^channel@[0-9a-f]+$":
+        type: object
+        $ref: ../iio/adc/adc.yaml#
+        description: Represents each of the external channels which are
+          connected to the ADC.
+
+        properties:
+          reg:
+            items:
+              minimum: 1
+              maximum: 31
+
+        required:
+          - reg
+
+        additionalProperties: false
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+      - vddadc-supply
+      - '#address-cells'
+      - '#size-cells'
+      - '#io-channel-cells'
+
+    additionalProperties: false
+
+  thermal:
+    description: Node describing the AB8500 thermal control block. All this block
+      really does is to fire an interrupt when the die becomes 130 degrees Celsius
+      in temperature.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,abx500-temp
+
+      interrupts:
+        items:
+          - description: Thermal warm warning interrupt
+
+      interrupt-names:
+        items:
+          - const: ABX500_TEMP_WARM
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+
+    additionalProperties: false
+
+  ab8500_fg:
+    description: Node describing the AB8500 fuel gauge control block.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-fg.yaml
+
+  ab8500_btemp:
+    description: Node describing the AB8500 battery temperature control block.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-btemp.yaml
+
+  ab8500_charger:
+    description: Node describing the AB8500 battery charger control block.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-charger.yaml
+
+  ab8500_chargalg:
+    description: Node describing the AB8500 battery charger algorithm.
+    type: object
+    $ref: ../power/supply/stericsson,ab8500-chargalg.yaml
+
+  phy:
+    description: Node describing the AB8500 USB PHY control block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-usb
+
+      interrupts:
+        items:
+          - description: ID wakeup rising IRQ
+          - description: ID wakeup falling IRQ
+          - description: VBUS detection falling IRQ
+          - description: VBUS detection rising IRQ
+          - description: USB link status change IRQ
+          - description: ADP probe plug IRQ
+          - description: ADP probe unplug IRQ
+
+      interrupt-names:
+        items:
+          - const: ID_WAKEUP_R
+          - const: ID_WAKEUP_F
+          - const: VBUS_DET_F
+          - const: VBUS_DET_R
+          - const: USB_LINK_STATUS
+          - const: USB_ADP_PROBE_PLUG
+          - const: USB_ADP_PROBE_UNPLUG
+
+      vddulpivio18-supply: true
+      v-ape-supply: true
+      musb_1v8-supply: true
+
+      clocks:
+        items:
+          - description: PRCMY system clock
+
+      clock-names:
+        items:
+          - const: sysclk
+
+      '#phy-cells':
+        const: 0
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+      - vddulpivio18-supply
+      - v-ape-supply
+      - musb_1v8-supply
+      - clocks
+      - clock-names
+      - '#phy-cells'
+
+    additionalProperties: false
+
+  key:
+    description: Node describing the AB8500 power-on key control block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-poweron-key
+
+      interrupts:
+        items:
+          - description: ON key falling IRQ
+          - description: ON key rising IRQ
+
+      interrupt-names:
+        items:
+          - const: ONKEY_DBF
+          - const: ONKEY_DBR
+
+    required:
+      - compatible
+      - interrupts
+      - interrupt-names
+
+    additionalProperties: false
+
+  ab8500-sysctrl:
+    description: Node describing the AB8500 system control block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-sysctrl
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  codec:
+    description: Node describing the AB8500 audio codec block.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-codec
+
+      V-AUD-supply: true
+      V-AMIC1-supply: true
+      V-AMIC2-supply: true
+      V-DMIC-supply: true
+
+      clocks:
+        items:
+          - description: Audio system clock
+
+      clock-names:
+        items:
+          - const: audioclk
+
+      stericsson,earpeice-cmv:
+        description: Earpeice voltage
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [ 950, 1100, 1270, 1580 ]
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+  regulator:
+    description: Node describing the AB8500 internal regulators.
+    type: object
+
+    properties:
+      compatible:
+        enum:
+          - stericsson,ab8500-regulator
+          - stericsson,ab8505-regulator
+
+      vin-supply:
+        description: The regulator supplying all of the internal regulators
+          with power.
+
+      ab8500_ldo_aux1:
+        description: The voltage for the auxilary LDO regulator 1
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux2:
+        description: The voltage for the auxilary LDO regulator 2
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux3:
+        description: The voltage for the auxilary LDO regulator 3
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux4:
+        description: The voltage for the auxilary LDO regulator 4
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux5:
+        description: The voltage for the auxilary LDO regulator 5
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_aux6:
+        description: The voltage for the auxilary LDO regulator 6
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      # There is never any AUX7 regulator which is confusing
+
+      ab8500_ldo_aux8:
+        description: The voltage for the auxilary LDO regulator 8
+          only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_intcore:
+        description: The LDO regulator for the internal core voltage
+          of the AB8500
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_adc:
+        description: Analog power regulator for the analog to digital converter
+          ADC, only present on AB8505
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_tvout:
+        description: The voltage for the TV output regulator, incidentally
+          this voltage is also used for other purposes such as measuring
+          the temperature of the NTC thermistor on the battery.
+          Only present on AB8500.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_audio:
+        description: The LDO regulator for the audio codec output
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_anamic1:
+        description: The LDO regulator for the analog microphone 1
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_anamic2:
+        description: The LDO regulator for the analog microphone 2
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_dmic:
+        description: The LDO regulator for the digital microphone
+          only present on AB8500
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ldo_ana:
+        description: Analog power regulator for CSI and DSI interfaces,
+          Camera Serial Interface CSI and Display Serial Interface DSI.
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+
+  regulator-external:
+    description: Node describing the AB8500 external regulators. This
+      concerns the autonomous regulators VSMPS1, VSMPS2 and VSMPS3
+      that are normally controlled by external electronics but also
+      sometimes need to be explicitly controlled by software.
+    type: object
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-ext-regulator
+
+      ab8500_ext1:
+        description: The voltage for the VSMPS1 external regulator
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ext2:
+        description: The voltage for the VSMPS2 external regulator
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      ab8500_ext3:
+        description: The voltage for the VSMPS3 external regulator
+        type: object
+        $ref: ../regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+patternProperties:
+  "^pwm@[1-9]+?$":
+    type: object
+    $ref: ../pwm/pwm.yaml#
+    unevaluatedProperties: false
+    description: Represents each of the PWM blocks in the AB8500
+
+    properties:
+      compatible:
+        const: stericsson,ab8500-pwm
+
+      reg: true
+
+      clocks:
+        items:
+          - description: internal clock
+
+      clock-names:
+        items:
+          - const: intclk
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - compatible
+  - clock-controller
+  - gpio
+  - rtc
+  - adc
+  - thermal
+  - ab8500_fg
+  - ab8500_btemp
+  - ab8500_charger
+  - ab8500_chargalg
+  - phy
+  - key
+  - regulator
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml
index a0d4bad5dc81..1d4d88f7e82d 100644
--- a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml
+++ b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml
@@ -263,6 +263,7 @@ patternProperties:
       set of devicetree bindings. The AB8505 is a newer version of the
       same ASIC.
     type: object
+    $ref: stericsson,ab8500.yaml#
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index abe3fd817e0b..8103154bbb52 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mfd/syscon.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: System Controller Registers R/W Device Tree Bindings
+title: System Controller Registers R/W
 
 description: |
   System controller node represents a register region containing a set
@@ -17,7 +17,7 @@ description: |
   and access the registers directly.
 
 maintainers:
-  - Lee Jones <lee.jones@linaro.org>
+  - Lee Jones <lee@kernel.org>
 
 select:
   properties:
@@ -38,30 +38,44 @@ properties:
               - allwinner,sun8i-h3-system-controller
               - allwinner,sun8i-v3s-system-controller
               - allwinner,sun50i-a64-system-controller
+              - amd,pensando-elba-syscon
+              - brcm,cru-clkset
+              - freecom,fsg-cs2-system-controller
+              - fsl,imx93-aonmix-ns-syscfg
+              - fsl,imx93-wakeupmix-syscfg
               - hisilicon,dsa-subctrl
               - hisilicon,hi6220-sramctrl
               - hisilicon,pcie-sas-subctrl
               - hisilicon,peri-subctrl
+              - hpe,gxp-sysreg
+              - intel,lgm-syscon
+              - marvell,armada-3700-usb2-host-misc
+              - mediatek,mt8135-pctl-a-syscfg
+              - mediatek,mt8135-pctl-b-syscfg
+              - mediatek,mt8365-syscfg
+              - microchip,lan966x-cpu-syscon
               - microchip,sparx5-cpu-syscon
               - mstar,msc313-pmsleep
+              - nuvoton,ma35d1-sys
+              - nuvoton,wpcm450-shm
               - rockchip,px30-qos
               - rockchip,rk3036-qos
               - rockchip,rk3066-qos
               - rockchip,rk3228-qos
               - rockchip,rk3288-qos
+              - rockchip,rk3368-qos
               - rockchip,rk3399-qos
               - rockchip,rk3568-qos
-              - samsung,exynos3-sysreg
-              - samsung,exynos4-sysreg
-              - samsung,exynos5-sysreg
-              - samsung,exynos5433-sysreg
+              - rockchip,rk3588-qos
+              - rockchip,rv1126-qos
+              - starfive,jh7100-sysmain
 
           - const: syscon
 
       - contains:
           const: syscon
         minItems: 2
-        maxItems: 4  # Should be enough
+        maxItems: 5  # Should be enough
 
   reg:
     maxItems: 1
@@ -70,9 +84,11 @@ properties:
     description: |
       The size (in bytes) of the IO accesses that should be performed
       on the device.
-    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [1, 2, 4, 8]
 
+  resets:
+    maxItems: 1
+
   hwlocks:
     maxItems: 1
     description:
@@ -82,6 +98,18 @@ required:
   - compatible
   - reg
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: simple-mfd
+    then:
+      properties:
+        compatible:
+          minItems: 3
+          maxItems: 5
+
 additionalProperties: true
 
 examples:
@@ -90,12 +118,4 @@ examples:
         compatible = "allwinner,sun8i-h3-system-controller", "syscon";
         reg = <0x01c00000 0x1000>;
     };
-
-  - |
-    gpr: iomuxc-gpr@20e0000 {
-        compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
-        reg = <0x020e0000 0x38>;
-        hwlocks = <&hwlock1 1>;
-    };
-
 ...
diff --git a/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml
new file mode 100644
index 000000000000..23a63265be3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,am3359-tscadc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM3359 Touchscreen controller/ADC
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: ti,am3359-tscadc
+      - items:
+          - const: ti,am654-tscadc
+          - const: ti,am3359-tscadc
+      - const: ti,am4372-magadc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: fck
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for FIFO0
+      - description: DMA controller phandle and request line for FIFO1
+
+  dma-names:
+    items:
+      - const: fifo0
+      - const: fifo1
+
+  adc:
+    type: object
+    description: ADC child
+
+  tsc:
+    type: object
+    description: Touchscreen controller child
+
+  mag:
+    type: object
+    description: Magnetic reader
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tscadc@0 {
+        compatible = "ti,am3359-tscadc";
+        reg = <0x0 0x1000>;
+        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&adc_tsc_fck>;
+        clock-names = "fck";
+        dmas = <&edma 53 0>, <&edma 57 0>;
+        dma-names = "fifo0", "fifo1";
+
+        tsc {
+        };
+
+        adc {
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
index 272832e9f8f2..0c98d913747b 100644
--- a/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/mfd/ti,j721e-system-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI J721e System Controller Registers R/W Device Tree Bindings
+title: TI J721e System Controller Registers R/W
 
 description: |
   This represents the Control Module registers (CTRL_MMR0) on the SoC.
@@ -20,13 +20,15 @@ description: |
 
 maintainers:
   - Kishon Vijay Abraham I <kishon@ti.com>
-  - Roger Quadros <rogerq@ti.com
+  - Roger Quadros <rogerq@kernel.org>
 
 properties:
   compatible:
     items:
       - enum:
+          - ti,j7200-system-controller
           - ti,j721e-system-controller
+          - ti,j721s2-system-controller
       - const: syscon
       - const: simple-mfd
 
@@ -48,6 +50,24 @@ patternProperties:
     description:
       This is the SERDES lane control mux.
 
+  "^clock-controller@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/clock/ti,am654-ehrpwm-tbclk.yaml#
+    description:
+      Clock provider for TI EHRPWM nodes.
+
+  "phy@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/phy/ti,phy-gmii-sel.yaml#
+    description:
+      The phy node corresponding to the ethernet MAC.
+
+  "^chipid@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/hwinfo/ti,k3-socinfo.yaml#
+    description:
+      The node corresponding to SoC chip identification.
+
 required:
   - compatible
   - reg
@@ -79,5 +99,16 @@ examples:
                 <0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
                 /* SERDES4 lane0/1/2/3 select */
         };
+
+        clock-controller@4140 {
+            compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+            reg = <0x4140 0x18>;
+            #clock-cells = <1>;
+        };
+
+        chipid@14 {
+            compatible = "ti,am654-chipid";
+            reg = <0x14 0x4>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/mfd/ti,nspire-misc.yaml b/Documentation/devicetree/bindings/mfd/ti,nspire-misc.yaml
new file mode 100644
index 000000000000..28cd5164d46f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,nspire-misc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,nspire-misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Nspire MISC hardware block
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+description:
+  System controller node represents a register region containing a set
+  of miscellaneous registers. The registers are not cohesive enough to
+  represent as any specific type of device. Currently there is a reset
+  controller.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,nspire-misc
+      - const: syscon
+      - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  reboot:
+    $ref: /schemas/power/reset/syscon-reboot.yaml#
+
+required:
+  - compatible
+  - reg
+  - reboot
+
+additionalProperties: false
+
+examples:
+  - |
+    misc: misc@900a0000 {
+      compatible = "ti,nspire-misc", "syscon", "simple-mfd";
+      reg = <0x900a0000 0x1000>;
+
+      reboot {
+        compatible = "syscon-reboot";
+        offset = <0x08>;
+        value = <0x02>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
index 6aeedda3be15..bd36a07c1721 100644
--- a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
@@ -38,6 +38,7 @@ properties:
 
   regulators:
     type: object
+    additionalProperties: false
     description: |
       List of child nodes that specify the regulator initialization data.
       Child nodes must be named after their hardware counterparts:
@@ -94,7 +95,7 @@ required:
 examples:
   - |
     #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
index 9e762d474218..7902f3c5d289 100644
--- a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
@@ -14,6 +14,7 @@ description: |
   range of analogue I/O.
 
 allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
   - $ref: /schemas/sound/wlf,arizona.yaml#
   - $ref: /schemas/regulator/wlf,arizona.yaml#
   - $ref: /schemas/extcon/wlf,arizona.yaml#
@@ -155,7 +156,7 @@ properties:
       entry has a value that is out of range for a 16 bit register then the
       chip default will be used. If present exactly five values must be
       specified.
-    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     minItems: 1
     maxItems: 5
 
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
new file mode 100644
index 000000000000..f3d8394b27e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/x-powers,ac100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: X-Powers AC100
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+
+properties:
+  compatible:
+    const: x-powers,ac100
+
+  reg:
+    maxItems: 1
+
+  codec:
+    type: object
+
+    properties:
+      "#clock-cells":
+        const: 0
+
+      compatible:
+        const: x-powers,ac100-codec
+
+      interrupts:
+        maxItems: 1
+
+      clock-output-names:
+        maxItems: 1
+        description: >
+          Name of the 4M_adda clock exposed by the codec
+
+    required:
+      - "#clock-cells"
+      - compatible
+      - interrupts
+      - clock-output-names
+
+    additionalProperties: false
+
+  rtc:
+    type: object
+
+    properties:
+      "#clock-cells":
+        const: 1
+
+      compatible:
+        const: x-powers,ac100-rtc
+
+      interrupts:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+        description: >
+           A phandle to the codec's "4M_adda" clock
+
+      clock-output-names:
+        maxItems: 3
+        description: >
+          Name of the cko1, cko2 and cko3 clocks exposed by the codec
+
+    required:
+      - "#clock-cells"
+      - compatible
+      - interrupts
+      - clocks
+      - clock-output-names
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - codec
+  - rtc
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    rsb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@e89 {
+            compatible = "x-powers,ac100";
+            reg = <0xe89>;
+
+            ac100_codec: codec {
+                compatible = "x-powers,ac100-codec";
+                interrupt-parent = <&r_pio>;
+                interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
+                #clock-cells = <0>;
+                clock-output-names = "4M_adda";
+            };
+
+            ac100_rtc: rtc {
+                compatible = "x-powers,ac100-rtc";
+                interrupt-parent = <&nmi_intc>;
+                interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+                clocks = <&ac100_codec>;
+                #clock-cells = <1>;
+                clock-output-names = "cko1_rtc", "cko2_rtc", "cko3_rtc";
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
new file mode 100644
index 000000000000..f7f0f2c0421a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
@@ -0,0 +1,412 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: X-Powers AXP PMIC
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - x-powers,axp152
+              - x-powers,axp202
+              - x-powers,axp209
+
+    then:
+      properties:
+        regulators:
+          properties:
+            x-powers,dcdc-freq:
+              minimum: 750
+              maximum: 1875
+              default: 1500
+
+    else:
+      properties:
+        regulators:
+          properties:
+            x-powers,dcdc-freq:
+              minimum: 1800
+              maximum: 4050
+              default: 3000
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - x-powers,axp152
+              - x-powers,axp202
+              - x-powers,axp209
+
+    then:
+      properties:
+        x-powers,drive-vbus-en: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: x-powers,axp806
+
+    then:
+      properties:
+        x-powers,self-working-mode: false
+        x-powers,master-mode: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: x-powers,axp305
+
+    then:
+      required:
+        - interrupts
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - x-powers,axp313a
+              - x-powers,axp15060
+
+    then:
+      properties:
+        x-powers,dcdc-freq: false
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - x-powers,axp152
+          - x-powers,axp202
+          - x-powers,axp209
+          - x-powers,axp221
+          - x-powers,axp223
+          - x-powers,axp313a
+          - x-powers,axp803
+          - x-powers,axp806
+          - x-powers,axp809
+          - x-powers,axp813
+          - x-powers,axp15060
+      - items:
+          - const: x-powers,axp228
+          - const: x-powers,axp221
+      - items:
+          - const: x-powers,axp805
+          - const: x-powers,axp806
+      - items:
+          - const: x-powers,axp305
+          - const: x-powers,axp805
+          - const: x-powers,axp806
+      - items:
+          - const: x-powers,axp818
+          - const: x-powers,axp813
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  x-powers,drive-vbus-en:
+    type: boolean
+    description: >
+      Set this when the N_VBUSEN pin is used as an output pin to control an
+      external regulator to drive the OTG VBus, rather then as an input pin
+      which signals whether the board is driving OTG VBus or not.
+
+  x-powers,self-working-mode:
+    type: boolean
+    description: >
+      Set this when the PMIC is wired for self-working mode through the MODESET
+      pin.
+
+  x-powers,master-mode:
+    type: boolean
+    description: >
+      Set this when the PMIC is wired for master mode through the MODESET pin.
+
+  vin1-supply:
+    description: >
+      DCDC1 power supply node, if present.
+
+  vin2-supply:
+    description: >
+      DCDC2 power supply node, if present.
+
+  vin3-supply:
+    description: >
+      DCDC3 power supply node, if present.
+
+  vin4-supply:
+    description: >
+      DCDC4 power supply node, if present.
+
+  vin5-supply:
+    description: >
+      DCDC5 power supply node, if present.
+
+  vin6-supply:
+    description: >
+      DCDC6 power supply node, if present.
+
+  vin7-supply:
+    description: >
+      DCDC7 power supply node, if present.
+
+  vina-supply:
+    description: >
+      DCDCA power supply node, if present.
+
+  vinb-supply:
+    description: >
+      DCDCB power supply node, if present.
+
+  vinc-supply:
+    description: >
+      DCDCC power supply node, if present.
+
+  vind-supply:
+    description: >
+      DCDCD power supply node, if present.
+
+  vine-supply:
+    description: >
+      DCDCE power supply node, if present.
+
+  acin-supply:
+    description: >
+      LDO1 power supply node, if present.
+
+  ldo24in-supply:
+    description: >
+      LDO2 and LDO4 power supply node, if present.
+
+  ldo3in-supply:
+    description: >
+      LDO3 power supply node, if present.
+
+  ldo5in-supply:
+    description: >
+      LDO5 power supply node, if present.
+
+  aldoin-supply:
+    description: >
+      ALDO* power supply node, if present.
+
+  bldoin-supply:
+    description: >
+      BLDO* power supply node, if present.
+
+  cldoin-supply:
+    description: >
+      CLDO* power supply node, if present.
+
+  dldoin-supply:
+    description: >
+      DLDO* power supply node, if present.
+
+  eldoin-supply:
+    description: >
+      ELDO* power supply node, if present.
+
+  fldoin-supply:
+    description: >
+      FLDO* power supply node, if present.
+
+  ips-supply:
+    description: >
+      LDO_IO0, LDO_IO1 and RTC_LDO power supply node, if present.
+
+  drivevbus-supply:
+    description: >
+      DRIVEVBUS power supply node, if present.
+
+  swin-supply:
+    description: >
+      SW power supply node, if present.
+
+  adc:
+    $ref: /schemas/iio/adc/x-powers,axp209-adc.yaml#
+
+  gpio:
+    $ref: /schemas/gpio/x-powers,axp209-gpio.yaml#
+
+  ac-power:
+    $ref: /schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml#
+
+  battery-power:
+    $ref: /schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml#
+
+  usb-power:
+    $ref: /schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml#
+
+  regulators:
+    type: object
+
+    properties:
+      x-powers,dcdc-freq:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          Defines the work frequency of DC-DC in kHz.
+
+    patternProperties:
+      "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|cpusldo|drivevbus|dc5ldo)$":
+        $ref: /schemas/regulator/regulator.yaml#
+        type: object
+        unevaluatedProperties: false
+
+        properties:
+          regulator-ramp-delay:
+            description: >
+              Only 800 and 1600 are valid for the DCDC2 and LDO3 regulators on
+              the AXP209.
+
+          regulator-soft-start:
+            description: >
+              Only valid for the LDO3 regulator.
+
+          x-powers,dcdc-workmode:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1]
+            description: >
+              Only valid for DCDC regulators. Setup 1 for PWM mode, 0
+              for AUTO (PWM/PFM) mode. The DCDC regulators work in a
+              mixed PWM/PFM mode, using PFM under light loads and
+              switching to PWM for heavier loads. Forcing PWM mode
+              trades efficiency under light loads for lower output
+              noise. This probably makes sense for HiFi audio related
+              applications that aren't battery constrained.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pmic@30 {
+              compatible = "x-powers,axp152";
+              reg = <0x30>;
+              interrupts = <0>;
+              interrupt-controller;
+              #interrupt-cells = <1>;
+          };
+      };
+
+  - |
+      #include <dt-bindings/interrupt-controller/irq.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pmic@34 {
+              compatible = "x-powers,axp209";
+              reg = <0x34>;
+              interrupt-parent = <&nmi_intc>;
+              interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+              interrupt-controller;
+              #interrupt-cells = <1>;
+
+              ac_power_supply: ac-power {
+                  compatible = "x-powers,axp202-ac-power-supply";
+              };
+
+              axp_adc: adc {
+                  compatible = "x-powers,axp209-adc";
+                  #io-channel-cells = <1>;
+              };
+
+              axp_gpio: gpio {
+                  compatible = "x-powers,axp209-gpio";
+                  gpio-controller;
+                  #gpio-cells = <2>;
+
+                  gpio0-adc-pin {
+                      pins = "GPIO0";
+                      function = "adc";
+                  };
+              };
+
+              battery_power_supply: battery-power {
+                  compatible = "x-powers,axp209-battery-power-supply";
+              };
+
+              regulators {
+                  /* Default work frequency for buck regulators */
+                  x-powers,dcdc-freq = <1500>;
+
+                  reg_dcdc2: dcdc2 {
+                      regulator-always-on;
+                      regulator-min-microvolt = <1000000>;
+                      regulator-max-microvolt = <1450000>;
+                      regulator-name = "vdd-cpu";
+                  };
+
+                  reg_dcdc3: dcdc3 {
+                      regulator-always-on;
+                      regulator-min-microvolt = <1000000>;
+                      regulator-max-microvolt = <1400000>;
+                      regulator-name = "vdd-int-dll";
+                  };
+
+                  reg_ldo1: ldo1 {
+                      /* LDO1 is a fixed output regulator */
+                      regulator-always-on;
+                      regulator-min-microvolt = <1300000>;
+                      regulator-max-microvolt = <1300000>;
+                      regulator-name = "vdd-rtc";
+                  };
+
+                  reg_ldo2: ldo2 {
+                      regulator-always-on;
+                      regulator-min-microvolt = <3000000>;
+                      regulator-max-microvolt = <3000000>;
+                      regulator-name = "avcc";
+                  };
+
+                  reg_ldo3: ldo3 {
+                      regulator-name = "ldo3";
+                  };
+
+                  reg_ldo4: ldo4 {
+                      regulator-name = "ldo4";
+                  };
+
+                  reg_ldo5: ldo5 {
+                      regulator-name = "ldo5";
+                  };
+              };
+
+              usb_power_supply: usb-power {
+                  compatible = "x-powers,axp202-usb-power-supply";
+              };
+          };
+      };
diff --git a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
index 8a1a6625c782..6e880a46d7ee 100644
--- a/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
+++ b/Documentation/devicetree/bindings/mfd/xylon,logicvc.yaml
@@ -2,8 +2,8 @@
 # Copyright 2019 Bootlin
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mfd/xylon,logicvc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mfd/xylon,logicvc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Xylon LogiCVC multi-function device
 
@@ -46,6 +46,9 @@ patternProperties:
   "^gpio@[0-9a-f]+$":
     $ref: /schemas/gpio/xylon,logicvc-gpio.yaml#
 
+  "^display@[0-9a-f]+$":
+    $ref: /schemas/display/xylon,logicvc-display.yaml#
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/mips/brcm/brcm,bmips.txt b/Documentation/devicetree/bindings/mips/brcm/brcm,bmips.txt
deleted file mode 100644
index 8ef71b4085ca..000000000000
--- a/Documentation/devicetree/bindings/mips/brcm/brcm,bmips.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-* Broadcom MIPS (BMIPS) CPUs
-
-Required properties:
-- compatible: "brcm,bmips3300", "brcm,bmips4350", "brcm,bmips4380",
-  "brcm,bmips5000"
-
-- mips-hpt-frequency: This is common to all CPUs in the system so it lives
-  under the "cpus" node.
diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.yaml b/Documentation/devicetree/bindings/mips/brcm/soc.yaml
new file mode 100644
index 000000000000..975945ca2888
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/brcm/soc.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/brcm/soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom cable/DSL/settop platforms
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description: |
+    Boards Broadcom cable/DSL/settop SoC shall have the following properties.
+    The experimental -viper variants are for running Linux on the 3384's
+    BMIPS4355 cable modem CPU instead of the BMIPS5000 application processor.
+
+properties:
+  $nodename:
+    const: '/'
+
+  compatible:
+    enum:
+      - brcm,bcm3368
+      - brcm,bcm3384
+      - brcm,bcm33843
+      - brcm,bcm3384-viper
+      - brcm,bcm33843-viper
+      - brcm,bcm6328
+      - brcm,bcm6358
+      - brcm,bcm6362
+      - brcm,bcm6368
+      - brcm,bcm63168
+      - brcm,bcm63268
+      - brcm,bcm7125
+      - brcm,bcm7346
+      - brcm,bcm7358
+      - brcm,bcm7360
+      - brcm,bcm7362
+      - brcm,bcm7420
+      - brcm,bcm7425
+
+  cpus:
+    type: object
+    additionalProperties: false
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      mips-hpt-frequency:
+        description: MIPS counter high precision timer frequency.
+         This is common to all CPUs in the system so it lives
+         under the "cpus" node.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    patternProperties:
+      "^cpu@[0-9]$":
+        type: object
+        $ref: /schemas/mips/cpus.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - mips-hpt-frequency
+
+additionalProperties: true
+
+examples:
+  - |
+     / {
+         compatible = "brcm,bcm3368";
+         #address-cells = <1>;
+         #size-cells = <1>;
+         model = "Broadcom 3368";
+
+         cpus {
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           mips-hpt-frequency = <150000000>;
+
+           cpu@0 {
+             compatible = "brcm,bmips4350";
+             device_type = "cpu";
+             reg = <0>;
+           };
+
+           cpu@1 {
+             compatible = "brcm,bmips4350";
+             device_type = "cpu";
+             reg = <1>;
+           };
+         };
+       };
+...
diff --git a/Documentation/devicetree/bindings/mips/cpu_irq.txt b/Documentation/devicetree/bindings/mips/cpu_irq.txt
deleted file mode 100644
index f080f06da6d8..000000000000
--- a/Documentation/devicetree/bindings/mips/cpu_irq.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-MIPS CPU interrupt controller
-
-On MIPS the mips_cpu_irq_of_init() helper can be used to initialize the 8 CPU
-IRQs from a devicetree file and create a irq_domain for IRQ controller.
-
-With the irq_domain in place we can describe how the 8 IRQs are wired to the
-platforms internal interrupt controller cascade.
-
-Below is an example of a platform describing the cascade inside the devicetree
-and the code used to load it inside arch_init_irq().
-
-Required properties:
-- compatible : Should be "mti,cpu-interrupt-controller"
-
-Example devicetree:
-	cpu-irq: cpu-irq {
-		#address-cells = <0>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		compatible = "mti,cpu-interrupt-controller";
-	};
-
-	intc: intc@200 {
-		compatible = "ralink,rt2880-intc";
-		reg = <0x200 0x100>;
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		interrupt-parent = <&cpu-irq>;
-		interrupts = <2>;
-	};
-
-
-Example platform irq.c:
-static struct of_device_id __initdata of_irq_ids[] = {
-	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
-	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
-	{},
-};
-
-void __init arch_init_irq(void)
-{
-	of_irq_init(of_irq_ids);
-}
diff --git a/Documentation/devicetree/bindings/mips/cpus.yaml b/Documentation/devicetree/bindings/mips/cpus.yaml
new file mode 100644
index 000000000000..cf382dea3922
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/cpus.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/cpus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS CPUs
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description: |
+  The device tree allows to describe the layout of CPUs in a system through
+  the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
+  defining properties for every CPU.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bmips3300
+      - brcm,bmips4350
+      - brcm,bmips4380
+      - brcm,bmips5000
+      - brcm,bmips5200
+      - ingenic,xburst-mxu1.0
+      - ingenic,xburst-fpu1.0-mxu1.1
+      - ingenic,xburst-fpu2.0-mxu2.0
+      - ingenic,xburst2-fpu2.1-mxu2.1-smt
+      - loongson,gs264
+      - mips,m14Kc
+      - mips,mips4Kc
+      - mips,mips4KEc
+      - mips,mips24Kc
+      - mips,mips24KEc
+      - mips,mips74Kc
+      - mips,mips1004Kc
+      - mti,interaptiv
+      - mti,mips24KEc
+      - mti,mips14KEc
+      - mti,mips14Kc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  device_type: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ingenic,xburst-mxu1.0
+              - ingenic,xburst-fpu1.0-mxu1.1
+              - ingenic,xburst-fpu2.0-mxu2.0
+              - ingenic,xburst2-fpu2.1-mxu2.1-smt
+    then:
+      required:
+        - device_type
+        - clocks
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cpus {
+      #size-cells = <0>;
+      #address-cells = <1>;
+
+      cpu@0 {
+        compatible = "mips,mips1004Kc";
+        device_type = "cpu";
+        reg = <0>;
+      };
+
+      cpu@1 {
+        compatible = "mips,mips1004Kc";
+        device_type = "cpu";
+        reg = <1>;
+      };
+    };
+
+  - |
+    // Example 2 (Ingenic CPU)
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+
+    cpus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cpu@0 {
+        compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+        device_type = "cpu";
+        reg = <0>;
+
+        clocks = <&cgu JZ4780_CLK_CPU>;
+      };
+
+      cpu@1 {
+        compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+        device_type = "cpu";
+        reg = <1>;
+
+        clocks = <&cgu JZ4780_CLK_CORE1>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
index ee00d414df10..f2e822afe7fb 100644
--- a/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
+++ b/Documentation/devicetree/bindings/mips/ingenic/devices.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mips/ingenic/devices.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic XBurst based Platforms Device Tree Bindings
+title: Ingenic XBurst based Platforms
 
 maintainers:
   - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
diff --git a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml b/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml
deleted file mode 100644
index 6df1a9470d8f..000000000000
--- a/Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml
+++ /dev/null
@@ -1,69 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/mips/ingenic/ingenic,cpu.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Bindings for Ingenic XBurst family CPUs
-
-maintainers:
-  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
-
-description:
-  Ingenic XBurst family CPUs shall have the following properties.
-
-properties:
-  compatible:
-    oneOf:
-
-      - description: Ingenic XBurst®1 CPU Cores
-        enum:
-          - ingenic,xburst-mxu1.0
-          - ingenic,xburst-fpu1.0-mxu1.1
-          - ingenic,xburst-fpu2.0-mxu2.0
-
-      - description: Ingenic XBurst®2 CPU Cores
-        enum:
-          - ingenic,xburst2-fpu2.1-mxu2.1-smt
-
-  reg:
-    maxItems: 1
-
-  clocks:
-    maxItems: 1
-
-  device_type: true
-
-required:
-  - device_type
-  - compatible
-  - reg
-  - clocks
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/jz4780-cgu.h>
-
-    cpus {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        cpu0: cpu@0 {
-                device_type = "cpu";
-                compatible = "ingenic,xburst-fpu1.0-mxu1.1";
-                reg = <0>;
-
-                clocks = <&cgu JZ4780_CLK_CPU>;
-        };
-
-        cpu1: cpu@1 {
-                device_type = "cpu";
-                compatible = "ingenic,xburst-fpu1.0-mxu1.1";
-                reg = <1>;
-
-                clocks = <&cgu JZ4780_CLK_CORE1>;
-        };
-    };
-...
diff --git a/Documentation/devicetree/bindings/mips/lantiq/lantiq,dma-xway.yaml b/Documentation/devicetree/bindings/mips/lantiq/lantiq,dma-xway.yaml
index 40130fefa2b4..15d41bdbdc26 100644
--- a/Documentation/devicetree/bindings/mips/lantiq/lantiq,dma-xway.yaml
+++ b/Documentation/devicetree/bindings/mips/lantiq/lantiq,dma-xway.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mips/lantiq/lantiq,dma-xway.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Lantiq Xway SoCs DMA Controller DT bindings
+title: Lantiq Xway SoCs DMA Controller
 
 maintainers:
   - John Crispin <john@phrozen.org>
diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
index 58d51f480c9e..8ec6191c1712 100644
--- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
@@ -2,7 +2,7 @@ Lantiq XWAY SoC RCU binding
 ===========================
 
 This binding describes the RCU (reset controller unit) multifunction device,
-where each sub-device has it's own set of registers.
+where each sub-device has its own set of registers.
 
 The RCU register range is used for multiple purposes. Mostly one device
 uses one or multiple register exclusively, but for some registers some
diff --git a/Documentation/devicetree/bindings/mips/loongson/devices.yaml b/Documentation/devicetree/bindings/mips/loongson/devices.yaml
index 9fee6708e6f5..099e40e1482d 100644
--- a/Documentation/devicetree/bindings/mips/loongson/devices.yaml
+++ b/Documentation/devicetree/bindings/mips/loongson/devices.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mips/loongson/devices.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Loongson based Platforms Device Tree Bindings
+title: Loongson based Platforms
 
 maintainers:
   - Jiaxun Yang <jiaxun.yang@flygoat.com>
@@ -37,6 +37,18 @@ properties:
         items:
           - const: loongson,loongson64v-4core-virtio
 
+      - description: LS1B based boards
+        items:
+          - enum:
+              - loongson,lsgz-1b-dev
+          - const: loongson,ls1b
+
+      - description: LS1C based boards
+        items:
+          - enum:
+              - loongmasses,smartloong-1c
+          - const: loongson,ls1c
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml b/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml
new file mode 100644
index 000000000000..20b5836efd90
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/loongson/ls2k-reset.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mips/loongson/ls2k-reset.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson 2K1000 PM Controller
+
+maintainers:
+  - Qing Zhang <zhangqing@loongson.cn>
+
+description: |
+  This controller can be found in Loongson-2K1000 Soc systems.
+
+properties:
+  compatible:
+    const: loongson,ls2k-pm
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pm: reset-controller@1fe07000 {
+            compatible = "loongson,ls2k-pm";
+            reg = <0 0x1fe07000 0 0x422>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mips/ralink.txt b/Documentation/devicetree/bindings/mips/ralink.txt
deleted file mode 100644
index 8cc0ab41578c..000000000000
--- a/Documentation/devicetree/bindings/mips/ralink.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Ralink MIPS SoC device tree bindings
-
-1. SoCs
-
-Each device tree must specify a compatible value for the Ralink SoC
-it uses in the compatible property of the root node. The compatible
-value must be one of the following values:
-
-  ralink,rt2880-soc
-  ralink,rt3050-soc
-  ralink,rt3052-soc
-  ralink,rt3350-soc
-  ralink,rt3352-soc
-  ralink,rt3883-soc
-  ralink,rt5350-soc
-  ralink,mt7620a-soc
-  ralink,mt7620n-soc
-  ralink,mt7628a-soc
-  ralink,mt7688a-soc
-
-2. Boards
-
-GARDENA smart Gateway (MT7688)
-
-This board is based on the MediaTek MT7688 and equipped with 128 MiB
-of DDR and 8 MiB of flash (SPI NOR) and additional 128MiB SPI NAND
-storage.
-
-------------------------------
-Required root node properties:
-- compatible = "gardena,smart-gateway-mt7688", "ralink,mt7688a-soc",
-		"ralink,mt7628a-soc";
diff --git a/Documentation/devicetree/bindings/mips/ralink.yaml b/Documentation/devicetree/bindings/mips/ralink.yaml
new file mode 100644
index 000000000000..704b5b595127
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/ralink.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/ralink.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink SoC based Platforms
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+    Boards with a Ralink SoC shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: Boards with Ralink RT2880 SoC
+        items:
+          - enum:
+              - ralink,rt2880-eval-board
+          - const: ralink,rt2880-soc
+
+      - description: Boards with Ralink RT3050 SoC
+        items:
+          - const: ralink,rt3050-soc
+
+      - description: Boards with Ralink RT3052 SoC
+        items:
+          - enum:
+              - ralink,rt3052-eval-board
+          - const: ralink,rt3052-soc
+
+      - description: Boards with Ralink RT3350 SoC
+        items:
+          - const: ralink,rt3350-soc
+
+      - description: Boards with Ralink RT3352 SoC
+        items:
+          - const: ralink,rt3352-soc
+
+      - description: Boards with Ralink RT3383 SoC
+        items:
+          - enum:
+              - ralink,rt3883-eval-board
+          - const: ralink,rt3383-soc
+
+      - description: Boards with Ralink RT5350 SoC
+        items:
+          - const: ralink,rt5350-soc
+
+      - description: Boards with Mediatek/Ralink MT7620A SoC
+        items:
+          - enum:
+              - ralink,mt7620a-eval-board
+          - const: ralink,mt7620a-soc
+
+      - description: Boards with Mediatek/Ralink MT7620N SoC
+        items:
+          - const: ralink,mt7620n-soc
+
+      - description: Boards with Mediatek/Ralink MT7628A SoC
+        items:
+          - enum:
+              - onion,omega2+
+              - vocore,vocore2
+          - const: ralink,mt7628a-soc
+
+      - description: Boards with Mediatek/Ralink MT7688A SoC
+        items:
+          - enum:
+              - gardena,smart-gateway-mt7688
+              - onion,omega2+
+          - const: ralink,mt7628a-soc
+
+      - description: Boards with Mediatek/Ralink MT7621 SoC
+        items:
+          - enum:
+              - gnubee,gb-pc1
+              - gnubee,gb-pc2
+          - const: mediatek,mt7621-soc
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/mips/realtek-rtl.yaml b/Documentation/devicetree/bindings/mips/realtek-rtl.yaml
index aadff8ce0f49..f8ac309d2994 100644
--- a/Documentation/devicetree/bindings/mips/realtek-rtl.yaml
+++ b/Documentation/devicetree/bindings/mips/realtek-rtl.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mips/realtek-rtl.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Realtek RTL83xx/93xx SoC series device tree bindings
+title: Realtek RTL83xx/93xx SoC series
 
 maintainers:
   - Bert Vermeulen <bert@biot.com>
diff --git a/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml b/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
deleted file mode 100644
index 44fd2f6f0d8a..000000000000
--- a/Documentation/devicetree/bindings/misc/eeprom-93xx46.yaml
+++ /dev/null
@@ -1,70 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/misc/eeprom-93xx46.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Microchip 93xx46 SPI compatible EEPROM family dt bindings
-
-maintainers:
-  - Cory Tusar <cory.tusar@pid1solutions.com>
-
-properties:
-  compatible:
-    enum:
-      - atmel,at93c46
-      - atmel,at93c46d
-      - atmel,at93c56
-      - atmel,at93c66
-      - eeprom-93xx46
-      - microchip,93lc46b
-
-  data-size:
-    description: number of data bits per word
-    $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [8, 16]
-
-  reg:
-    description: chip select of EEPROM
-    maxItems: 1
-
-  spi-max-frequency: true
-  spi-cs-high: true
-
-  read-only:
-    description:
-      parameter-less property which disables writes to the EEPROM
-    type: boolean
-
-  select-gpios:
-    description:
-      specifies the GPIO that needs to be asserted prior to each access
-      of EEPROM (e.g. for SPI bus multiplexing)
-    maxItems: 1
-
-
-required:
-  - compatible
-  - reg
-  - data-size
-  - spi-max-frequency
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/gpio/gpio.h>
-
-    spi {
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      eeprom@0 {
-        compatible = "eeprom-93xx46";
-        reg = <0>;
-        spi-max-frequency = <1000000>;
-        spi-cs-high;
-        data-size = <8>;
-        select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
-      };
-    };
diff --git a/Documentation/devicetree/bindings/misc/idt,89hpesx.yaml b/Documentation/devicetree/bindings/misc/idt,89hpesx.yaml
new file mode 100644
index 000000000000..452236e79354
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/idt,89hpesx.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/idt,89hpesx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EEPROM / CSR SMBus-slave interface of IDT 89HPESx devices
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        pattern: '^idt,89hpes'
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - pattern: '^idt,89hpes(8nt2|12nt3|12n3a?|24n3a?|(12|24)t3g2|4t4g2|10t4g2|[56]t5|8t5a?)$'
+      - pattern: '^idt,89hpes(6t6g2|16t7|(24t6|32t8|48t12|16t4a?)(g2)?)$'
+      - pattern: '^idt,89hpes(24nt6a|32nt8[ab]|12nt12|16nt16|24nt24|32nt24[ab])g2$'
+      - pattern: '^idt,89hpes((32h8|48h12a?|22h16|34h16|64h16a?)(g2)?|16h16)$'
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+  
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^eeprom@':
+    $ref: /schemas/eeprom/at24.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        description: Only a subset of devices are supported
+        pattern: ',24c(32|64|128|256|512)$'
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        idt@74 {
+            compatible = "idt,89hpes32nt8ag2";
+            reg = <0x74>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eeprom@50 {
+                compatible = "atmel,24c64";
+                reg = <0x50>;
+                read-only;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/misc/idt_89hpesx.txt b/Documentation/devicetree/bindings/misc/idt_89hpesx.txt
deleted file mode 100644
index b9093b79ab7d..000000000000
--- a/Documentation/devicetree/bindings/misc/idt_89hpesx.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-EEPROM / CSR SMBus-slave interface of IDT 89HPESx devices
-
-Required properties:
-  - compatible : should be "<manufacturer>,<type>"
-		 Basically there is only one manufacturer: idt, but some
-		 compatible devices may be produced in future. Following devices
-		 are supported: 89hpes8nt2, 89hpes12nt3, 89hpes24nt6ag2,
-		 89hpes32nt8ag2, 89hpes32nt8bg2, 89hpes12nt12g2, 89hpes16nt16g2,
-		 89hpes24nt24g2, 89hpes32nt24ag2, 89hpes32nt24bg2;
-		 89hpes12n3, 89hpes12n3a, 89hpes24n3, 89hpes24n3a;
-		 89hpes32h8, 89hpes32h8g2, 89hpes48h12, 89hpes48h12g2,
-		 89hpes48h12ag2, 89hpes16h16, 89hpes22h16, 89hpes22h16g2,
-		 89hpes34h16, 89hpes34h16g2, 89hpes64h16, 89hpes64h16g2,
-		 89hpes64h16ag2;
-		 89hpes12t3g2, 89hpes24t3g2, 89hpes16t4, 89hpes4t4g2,
-		 89hpes10t4g2, 89hpes16t4g2, 89hpes16t4ag2, 89hpes5t5,
-		 89hpes6t5, 89hpes8t5, 89hpes8t5a, 89hpes24t6, 89hpes6t6g2,
-		 89hpes24t6g2, 89hpes16t7, 89hpes32t8, 89hpes32t8g2,
-		 89hpes48t12, 89hpes48t12g2.
-  - reg :	 I2C address of the IDT 89HPESx device.
-
-Optionally there can be EEPROM-compatible subnode:
-  - compatible:  There are five EEPROM devices supported: 24c32, 24c64, 24c128,
-		 24c256 and 24c512 differed by size.
-  - reg:         Custom address of EEPROM device (If not specified IDT 89HPESx
-    (optional)	 device will try to communicate with EEPROM sited by default
-		 address - 0x50)
-  - read-only :	 Parameterless property disables writes to the EEPROM
-    (optional)
-
-Example:
-	idt@60 {
-		compatible = "idt,89hpes32nt8ag2";
-		reg = <0x74>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		eeprom@50 {
-			compatible = "onsemi,24c64";
-			reg = <0x50>;
-			read-only;
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt
deleted file mode 100644
index 43d777ed8316..000000000000
--- a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-NVIDIA Tegra186 (and later) MISC register block
-
-The MISC register block found on Tegra186 and later SoCs contains registers
-that can be used to identify a given chip and various strapping options.
-
-Required properties:
-- compatible: Must be:
-  - Tegra186: "nvidia,tegra186-misc"
-  - Tegra194: "nvidia,tegra194-misc"
-  - Tegra234: "nvidia,tegra234-misc"
-- reg: Should contain 2 entries: The first entry gives the physical address
-       and length of the register region which contains revision and debug
-       features. The second entry specifies the physical address and length
-       of the register region indicating the strapping options.
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml
new file mode 100644
index 000000000000..cacb845868f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/nvidia,tegra186-misc.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/nvidia,tegra186-misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra186 (and later) MISC register block
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: The MISC register block found on Tegra186 and later SoCs contains
+  registers that can be used to identify a given chip and various strapping
+  options.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra186-misc
+      - nvidia,tegra194-misc
+      - nvidia,tegra234-misc
+
+  reg:
+    items:
+      - description: physical address and length of the registers which
+          contain revision and debug features
+      - description: physical address and length of the registers which
+          indicate strapping options
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    misc@100000 {
+        compatible = "nvidia,tegra186-misc";
+        reg = <0x00100000 0xf000>,
+              <0x0010f000 0x1000>;
+    };
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
deleted file mode 100644
index 83f6a251ba3e..000000000000
--- a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-NVIDIA Tegra APBMISC block
-
-Required properties:
-- compatible: Must be:
-  - Tegra20: "nvidia,tegra20-apbmisc"
-  - Tegra30: "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc"
-  - Tegra114: "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc"
-  - Tegra124: "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"
-  - Tegra132: "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"
-  - Tegra210: "nvidia,tegra210-apbmisc", "nvidia,tegra20-apbmisc"
-- reg: Should contain 2 entries: the first entry gives the physical address
-       and length of the registers which contain revision and debug features.
-       The second entry gives the physical address and length of the
-       registers indicating the strapping options.
-
-Optional properties:
-- nvidia,long-ram-code: If present, the RAM code is long (4 bit). If not, short (2 bit).
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.yaml b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.yaml
new file mode 100644
index 000000000000..6f504fa74007
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/nvidia,tegra20-apbmisc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra APBMISC block
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nvidia,tegra210-apbmisc
+              - nvidia,tegra124-apbmisc
+              - nvidia,tegra114-apbmisc
+              - nvidia,tegra30-apbmisc
+          - const: nvidia,tegra20-apbmisc
+
+      - items:
+          - const: nvidia,tegra20-apbmisc
+
+  reg:
+    items:
+      - description: physical address and length of the registers which
+          contain revision and debug features
+      - description: physical address and length of the registers which
+          indicate strapping options
+
+  nvidia,long-ram-code:
+    description: If present, the RAM code is long (4 bit). If not, short
+      (2 bit).
+    type: boolean
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    apbmisc@70000800 {
+        compatible = "nvidia,tegra20-apbmisc";
+        reg = <0x70000800 0x64>, /* Chip revision */
+              <0x70000008 0x04>; /* Strapping options */
+    };
diff --git a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
index b3c45c046ba5..e99342f268a6 100644
--- a/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
+++ b/Documentation/devicetree/bindings/misc/olpc,xo1.75-ec.yaml
@@ -5,7 +5,7 @@
 $id: http://devicetree.org/schemas/misc/olpc,xo1.75-ec.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: OLPC XO-1.75 Embedded Controller bindings
+title: OLPC XO-1.75 Embedded Controller
 
 description: |
   This binding describes the Embedded Controller acting as a SPI bus master
diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt b/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
deleted file mode 100644
index 2a1827ab50d2..000000000000
--- a/Documentation/devicetree/bindings/misc/qcom,fastrpc.txt
+++ /dev/null
@@ -1,78 +0,0 @@
-Qualcomm Technologies, Inc. FastRPC Driver
-
-The FastRPC implements an IPC (Inter-Processor Communication)
-mechanism that allows for clients to transparently make remote method
-invocations across DSP and APPS boundaries. This enables developers
-to offload tasks to the DSP and free up the application processor for
-other tasks.
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,fastrpc"
-
-- label
-	Usage: required
-	Value type: <string>
-	Definition: should specify the dsp domain name this fastrpc
-	corresponds to. must be one of this: "adsp", "mdsp", "sdsp", "cdsp"
-
-- #address-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 1
-
-- #size-cells
-	Usage: required
-	Value type: <u32>
-	Definition: Must be 0
-
-= COMPUTE BANKS
-Each subnode of the Fastrpc represents compute context banks available
-on the dsp.
-- All Compute context banks MUST contain the following properties:
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "qcom,fastrpc-compute-cb"
-
-- reg
-	Usage: required
-	Value type: <u32>
-	Definition: Context Bank ID.
-
-- qcom,nsessions:
-	Usage: Optional
-	Value type: <u32>
-	Defination: A value indicating how many sessions can share this
-		    context bank. Defaults to 1 when this property
-		    is not specified.
-
-Example:
-
-adsp-pil {
-	compatible = "qcom,msm8996-adsp-pil";
-	...
-	smd-edge {
-		label = "lpass";
-		fastrpc {
-			compatible = "qcom,fastrpc";
-			qcom,smd-channels = "fastrpcsmd-apps-dsp";
-			label = "adsp";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			cb@1 {
-				compatible = "qcom,fastrpc-compute-cb";
-				reg = <1>;
-			};
-
-			cb@2 {
-				compatible = "qcom,fastrpc-compute-cb";
-				reg = <2>;
-			};
-			...
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
new file mode 100644
index 000000000000..1ab9588cdd89
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/qcom,fastrpc.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/qcom,fastrpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm FastRPC Driver
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  The FastRPC implements an IPC (Inter-Processor Communication)
+  mechanism that allows for clients to transparently make remote method
+  invocations across DSP and APPS boundaries. This enables developers
+  to offload tasks to the DSP and free up the application processor for
+  other tasks.
+
+properties:
+  compatible:
+    const: qcom,fastrpc
+
+  label:
+    enum:
+      - adsp
+      - mdsp
+      - sdsp
+      - cdsp
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for remote heap CMA.
+
+  qcom,glink-channels:
+    description:
+      A list of channels tied to this function, used for matching
+      the function to a set of virtual channels.
+    $ref: "/schemas/types.yaml#/definitions/string-array"
+    items:
+      - const: fastrpcglink-apps-dsp
+
+  qcom,non-secure-domain:
+    description:
+      Used to mark the current domain as non-secure.
+    type: boolean
+
+  qcom,smd-channels:
+    description:
+      Channel name used for the RPM communication
+    $ref: "/schemas/types.yaml#/definitions/string-array"
+    items:
+      - const: fastrpcsmd-apps-dsp
+
+  qcom,vmids:
+    description:
+      Virtual machine IDs for remote processor.
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "(compute-)?cb@[0-9]*$":
+    type: object
+
+    description: >
+      Each subnode of the Fastrpc represents compute context banks available on the dsp.
+
+    properties:
+      compatible:
+        const: qcom,fastrpc-compute-cb
+
+      reg:
+        maxItems: 1
+
+      iommus:
+        minItems: 1
+        maxItems: 3
+
+      qcom,nsessions:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        default: 1
+        description: >
+          A value indicating how many sessions can share this context bank.
+
+    required:
+      - compatible
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - label
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    glink-edge {
+        interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                     IPCC_MPROC_SIGNAL_GLINK_QMP
+                                     IRQ_TYPE_EDGE_RISING>;
+        mboxes = <&ipcc IPCC_CLIENT_LPASS
+                        IPCC_MPROC_SIGNAL_GLINK_QMP>;
+        label = "lpass";
+        qcom,remote-pid = <2>;
+
+        fastrpc {
+            compatible = "qcom,fastrpc";
+            qcom,glink-channels = "fastrpcglink-apps-dsp";
+            label = "sdsp";
+            qcom,non-secure-domain;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            compute-cb@1 {
+                compatible = "qcom,fastrpc-compute-cb";
+                reg = <1>;
+                iommus = <&apps_smmu 0x0541 0x0>;
+            };
+
+            compute-cb@2 {
+                compatible = "qcom,fastrpc-compute-cb";
+                reg = <2>;
+                iommus = <&apps_smmu 0x0542 0x0>;
+            };
+
+            compute-cb@3 {
+                compatible = "qcom,fastrpc-compute-cb";
+                reg = <3>;
+                iommus = <&apps_smmu 0x0543 0x0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml b/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml
new file mode 100644
index 000000000000..1aebeb696ee0
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/qemu,vcpu-stall-detector.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/qemu,vcpu-stall-detector.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: VCPU stall detector
+
+description:
+  This binding describes a CPU stall detector mechanism for virtual CPUs
+  which is accessed through MMIO.
+
+maintainers:
+  - Sebastian Ene <sebastianene@google.com>
+
+properties:
+  compatible:
+    enum:
+      - qemu,vcpu-stall-detector
+
+  reg:
+    maxItems: 1
+
+  clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The internal clock of the stall detector peripheral measure in Hz used
+      to decrement its internal counter register on each tick.
+      Defaults to 10 if unset.
+    default: 10
+
+  timeout-sec:
+    description: |
+      The stall detector expiration timeout measured in seconds.
+      Defaults to 8 if unset. Please note that it also takes into account the
+      time spent while the VCPU is not running.
+    default: 8
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    vmwdt@9030000 {
+      compatible = "qemu,vcpu-stall-detector";
+      reg = <0x9030000 0x10000>;
+      clock-frequency = <10>;
+      timeout-sec = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/misc/xlnx,tmr-inject.yaml b/Documentation/devicetree/bindings/misc/xlnx,tmr-inject.yaml
new file mode 100644
index 000000000000..1b6020e4ec27
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/xlnx,tmr-inject.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/xlnx,tmr-inject.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Triple Modular Redundancy(TMR) Inject IP
+
+maintainers:
+  - Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
+
+description: |
+  The Triple Modular Redundancy(TMR) Inject core provides functional fault
+  injection by changing selected MicroBlaze instructions, which provides the
+  possibility to verify that the TMR subsystem error detection and fault
+  recovery logic is working properly.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,tmr-inject-1.0
+
+  reg:
+    maxItems: 1
+
+  xlnx,magic:
+    minimum: 0
+    maximum: 255
+    description: |
+      Magic number, When configured it allows the controller to perform
+      recovery.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - xlnx,magic
+
+additionalProperties: false
+
+examples:
+  - |
+    fault-inject@44a30000 {
+        compatible = "xlnx,tmr-inject-1.0";
+        reg = <0x44a10000 0x10000>;
+        xlnx,magic = <0x46>;
+    };
diff --git a/Documentation/devicetree/bindings/misc/xlnx,tmr-manager.yaml b/Documentation/devicetree/bindings/misc/xlnx,tmr-manager.yaml
new file mode 100644
index 000000000000..27de12147a52
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/xlnx,tmr-manager.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/xlnx,tmr-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Triple Modular Redundancy(TMR) Manager IP
+
+maintainers:
+  - Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
+
+description: |
+  The Triple Modular Redundancy(TMR) Manager is responsible for handling the
+  TMR subsystem state, including fault detection and error recovery. The core
+  is triplicated in each of the sub-blocks in the TMR subsystem, and provides
+  majority voting of its internal state.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,tmr-manager-1.0
+
+  reg:
+    maxItems: 1
+
+  xlnx,magic1:
+    minimum: 0
+    maximum: 255
+    description:
+      Magic byte 1, When configured it allows the controller to perform
+      recovery.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - xlnx,magic1
+
+additionalProperties: false
+
+examples:
+  - |
+    tmr-manager@44a10000 {
+        compatible = "xlnx,tmr-manager-1.0";
+        reg = <0x44a10000 0x10000>;
+        xlnx,magic1 = <0x46>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
index 4f62ad6ce50c..0ccd632d5620 100644
--- a/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mmc/allwinner,sun4i-a10-mmc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 MMC Controller Device Tree Bindings
+title: Allwinner A10 MMC Controller
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -24,6 +24,7 @@ properties:
       - const: allwinner,sun7i-a20-mmc
       - const: allwinner,sun8i-a83t-emmc
       - const: allwinner,sun9i-a80-mmc
+      - const: allwinner,sun20i-d1-mmc
       - const: allwinner,sun50i-a64-emmc
       - const: allwinner,sun50i-a64-mmc
       - const: allwinner,sun50i-a100-emmc
@@ -50,11 +51,17 @@ properties:
           - const: allwinner,sun50i-h6-mmc
           - const: allwinner,sun50i-a64-mmc
       - items:
+          - const: allwinner,sun20i-d1-emmc
+          - const: allwinner,sun50i-a100-emmc
+      - items:
           - const: allwinner,sun50i-h616-emmc
           - const: allwinner,sun50i-a100-emmc
       - items:
           - const: allwinner,sun50i-h616-mmc
           - const: allwinner,sun50i-a100-mmc
+      - items:
+          - const: allwinner,suniv-f1c100s-mmc
+          - const: allwinner,sun7i-a20-mmc
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml
new file mode 100644
index 000000000000..bc403ae9e5d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx-mmc.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/amlogic,meson-gx-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic SD / eMMC controller for S905/GXBB family SoCs
+
+description:
+  The MMC 5.1 compliant host controller on Amlogic provides the
+  interface for SD, eMMC and SDIO devices
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-axg-mmc
+      - items:
+          - const: amlogic,meson-gx-mmc
+          - const: amlogic,meson-gxbb-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: mmc controller instance
+      - description: card detect
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: core
+      - const: clkin0
+      - const: clkin1
+
+  resets:
+    maxItems: 1
+
+  amlogic,dram-access-quirk:
+    type: boolean
+    description:
+      set when controller's internal DMA engine cannot access the DRAM memory,
+      like on the G12A dedicated SDIO controller.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mmc@70000 {
+        compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
+        reg = <0x70000 0x2000>;
+        interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&clk_mmc>, <&xtal>, <&clk_div>;
+        clock-names = "core", "clkin0", "clkin1";
+        pinctrl-0 = <&emm_pins>;
+        resets = <&reset_mmc>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
deleted file mode 100644
index ccc5358db131..000000000000
--- a/Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Amlogic SD / eMMC controller for S905/GXBB family SoCs
-
-The MMC 5.1 compliant host controller on Amlogic provides the
-interface for SD, eMMC and SDIO devices.
-
-This file documents the properties in addition to those available in
-the MMC core bindings, documented by mmc.txt.
-
-Required properties:
-- compatible : contains one of:
-  - "amlogic,meson-gx-mmc"
-  - "amlogic,meson-gxbb-mmc"
-  - "amlogic,meson-gxl-mmc"
-  - "amlogic,meson-gxm-mmc"
-  - "amlogic,meson-axg-mmc"
-- clocks     : A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
-- clock-names: Should contain the following:
-	"core" - Main peripheral bus clock
-	"clkin0" - Parent clock of internal mux
-	"clkin1" - Other parent clock of internal mux
-  The driver has an internal mux clock which switches between clkin0 and clkin1 depending on the
-  clock rate requested by the MMC core.
-- resets     : phandle of the internal reset line
-
-Optional properties:
-- amlogic,dram-access-quirk: set when controller's internal DMA engine cannot access the
-  DRAM memory, like on the G12A dedicated SDIO controller.
-
-Example:
-
-	sd_emmc_a: mmc@70000 {
-		compatible = "amlogic,meson-gxbb-mmc";
-		reg = <0x0 0x70000 0x0 0x2000>;
-		interrupts = < GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&clkc CLKID_SD_EMMC_A>, <&xtal>, <&clkc CLKID_FCLK_DIV2>;
-		clock-names = "core", "clkin0", "clkin1";
-		pinctrl-0 = <&emmc_pins>;
-		resets = <&reset RESET_SD_EMMC_A>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
index 60955acb8e57..1a6cda82f296 100644
--- a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdhc.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mmc/amlogic,meson-mx-sdhc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Amlogic Meson SDHC controller Device Tree Bindings
+title: Amlogic Meson SDHC controller
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 maintainers:
   - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
index 37a5fe7b26dc..a6c19a6cc99e 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
@@ -1,16 +1,16 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mmc/arasan,sdhci.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mmc/arasan,sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Device Tree Bindings for the Arasan SDHCI Controller
+title: Arasan SDHCI Controller
 
 maintainers:
   - Adrian Hunter <adrian.hunter@intel.com>
 
 allOf:
-  - $ref: "mmc-controller.yaml#"
+  - $ref: mmc-controller.yaml#
   - if:
       properties:
         compatible:
@@ -27,6 +27,7 @@ allOf:
             enum:
               - xlnx,zynqmp-8.9a
               - xlnx,versal-8.9a
+              - xlnx,versal-net-emmc
     then:
       properties:
         clock-output-names:
@@ -62,6 +63,10 @@ properties:
         description:
           For this device it is strongly suggested to include
           clock-output-names and '#clock-cells'.
+      - const: xlnx,versal-net-emmc     # Versal Net eMMC PHY
+        description:
+          For this device it is strongly suggested to include
+          clock-output-names and '#clock-cells'.
       - items:
           - const: intel,lgm-sdhci-5.1-emmc     # Intel LGM eMMC PHY
           - const: arasan,sdhci-5.1
@@ -112,6 +117,9 @@ properties:
   phy-names:
     const: phy_arasan
 
+  resets:
+    maxItems: 1
+
   arasan,soc-ctl-syscon:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -153,7 +161,6 @@ properties:
       The MIO bank number in which the command and data lines are configured.
 
 dependencies:
-  clock-output-names: [ '#clock-cells' ]
   '#clock-cells': [ clock-output-names ]
 
 required:
diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
index 47595cb483be..1c96da04f0e5 100644
--- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -53,6 +53,12 @@ properties:
         items:
           - const: arm,pl18x
           - const: arm,primecell
+      - description: Entry for STMicroelectronics variant of PL18x.
+          This dedicated compatible is used by bootloaders.
+        items:
+          - const: st,stm32-sdmmc2
+          - const: arm,pl18x
+          - const: arm,primecell
 
   clocks:
     description: One or two clocks, the "apb_pclk" and the "MCLK"
@@ -60,6 +66,18 @@ properties:
     minItems: 1
     maxItems: 2
 
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    oneOf:
+      - items:
+          - const: tx
+          - const: rx
+      - items:
+          - const: rx
+          - const: tx
+
   power-domains: true
 
   resets:
@@ -77,7 +95,9 @@ properties:
       PIO (polled I/O) interrupt and occurs when the FIFO needs to be
       emptied as part of a bulk read from the card. Some variants have these
       two interrupts wired into the same line (logic OR) and in that case
-      only one interrupt may be provided.
+      only one interrupt may be provided. The interrupt-names property is
+      not used due to inconsistency of existing DTs regarding its content.
+    deprecated: false
     minItems: 1
     maxItems: 2
 
@@ -167,6 +187,9 @@ examples:
       clock-names = "mclk", "apb_pclk";
     };
 
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
     mmc@80126000 {
       compatible = "arm,pl18x", "arm,primecell";
       reg = <0x80126000 0x1000>;
@@ -188,12 +211,12 @@ examples:
       vqmmc-supply = <&vmmci>;
     };
 
+  - |
     mmc@101f6000 {
       compatible = "arm,pl18x", "arm,primecell";
       reg = <0x101f6000 0x1000>;
       clocks = <&sdiclk>, <&pclksdi>;
       clock-names = "mclk", "apb_pclk";
-      interrupt-parent = <&vica>;
       interrupts = <22>;
       max-frequency = <400000>;
       bus-width = <4>;
@@ -208,12 +231,12 @@ examples:
       vmmc-supply = <&vmmc_regulator>;
     };
 
+  - |
     mmc@52007000 {
       compatible = "arm,pl18x", "arm,primecell";
       arm,primecell-periphid = <0x10153180>;
       reg = <0x52007000 0x1000>;
       interrupts = <49>;
-      interrupt-names = "cmd_irq";
       clocks = <&rcc 0>;
       clock-names = "apb_pclk";
       resets = <&rcc 1>;
diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
index 987b287f3bff..9fce8cd7b0b6 100644
--- a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml
@@ -42,6 +42,7 @@ patternProperties:
   "^sdhci@[0-9a-f]+$":
     type: object
     $ref: mmc-controller.yaml
+    unevaluatedProperties: false
 
     properties:
       compatible:
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
deleted file mode 100644
index ae2074184528..000000000000
--- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* BROADCOM BRCMSTB/BMIPS SDHCI Controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-brcmstb driver.
-
-NOTE: The driver disables all UHS speed modes by default and depends
-on Device Tree properties to enable them for SoC/Board combinations
-that support them.
-
-Required properties:
-- compatible: should be one of the following
-  - "brcm,bcm7425-sdhci"
-  - "brcm,bcm7445-sdhci"
-  - "brcm,bcm7216-sdhci"
-
-Refer to clocks/clock-bindings.txt for generic clock consumer properties.
-
-Example:
-
-	sdhci@84b0000 {
-		sd-uhs-sdr50;
-		sd-uhs-ddr50;
-		sd-uhs-sdr104;
-		sdhci,auto-cmd12;
-		compatible = "brcm,bcm7216-sdhci",
-			   "brcm,bcm7445-sdhci",
-			   "brcm,sdhci-brcmstb";
-		reg = <0x84b0000 0x260 0x84b0300 0x200>;
-		reg-names = "host", "cfg";
-		interrupts = <0x0 0x26 0x4>;
-		interrupt-names = "sdio0_0";
-		clocks = <&scmi_clk 245>;
-		clock-names = "sw_sdio";
-	};
-
-	sdhci@84b1000 {
-		mmc-ddr-1_8v;
-		mmc-hs200-1_8v;
-		mmc-hs400-1_8v;
-		mmc-hs400-enhanced-strobe;
-		supports-cqe;
-		non-removable;
-		bus-width = <0x8>;
-		compatible = "brcm,bcm7216-sdhci",
-			   "brcm,bcm7445-sdhci",
-			   "brcm,sdhci-brcmstb";
-		reg = <0x84b1000 0x260 0x84b1300 0x200>;
-		reg-names = "host", "cfg";
-		interrupts = <0x0 0x27 0x4>;
-		interrupt-names = "sdio1_0";
-		clocks = <&scmi_clk 245>;
-		clock-names = "sw_sdio";
-	};
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
new file mode 100644
index 000000000000..c028039bc477
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/brcm,sdhci-brcmstb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BRCMSTB/BMIPS SDHCI Controller
+
+maintainers:
+  - Al Cooper <alcooperx@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - brcm,bcm7216-sdhci
+          - const: brcm,bcm7445-sdhci
+          - const: brcm,sdhci-brcmstb
+      - items:
+          - enum:
+              - brcm,bcm7445-sdhci
+          - const: brcm,sdhci-brcmstb
+      - items:
+          - enum:
+              - brcm,bcm7425-sdhci
+          - const: brcm,sdhci-brcmstb
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: host
+      - const: cfg
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: handle to core clock for the sdhci controller
+      - description: handle to improved 150Mhz clock for sdhci controller (Optional clock)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: sw_sdio
+      - const: sdio_freq # Optional clock
+
+  clock-frequency:
+    description:
+      Maximum operating frequency of sdio_freq sdhci controller clock
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 100000000
+    maximum: 150000000
+
+  sdhci,auto-cmd12:
+    type: boolean
+    description: Specifies that controller should use auto CMD12
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        clock-names:
+          contains:
+            const: sdio_freq
+
+    then:
+      required:
+        - clock-frequency
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@84b0000 {
+      compatible = "brcm,bcm7216-sdhci",
+                   "brcm,bcm7445-sdhci",
+                   "brcm,sdhci-brcmstb";
+      reg = <0x84b0000 0x260>, <0x84b0300 0x200>;
+      reg-names = "host", "cfg";
+      sd-uhs-sdr50;
+      sd-uhs-ddr50;
+      sd-uhs-sdr104;
+      sdhci,auto-cmd12;
+      interrupts = <0x0 0x26 0x4>;
+      clocks = <&scmi_clk 245>;
+      clock-names = "sw_sdio";
+    };
+
+    mmc@84b1000 {
+      compatible = "brcm,bcm7216-sdhci",
+                   "brcm,bcm7445-sdhci",
+                   "brcm,sdhci-brcmstb";
+      reg = <0x84b1000 0x260>, <0x84b1300 0x200>;
+      reg-names = "host", "cfg";
+      mmc-ddr-1_8v;
+      mmc-hs200-1_8v;
+      mmc-hs400-1_8v;
+      mmc-hs400-enhanced-strobe;
+      supports-cqe;
+      non-removable;
+      bus-width = <0x8>;
+      interrupts = <0x0 0x27 0x4>;
+      clocks = <&scmi_clk 245>;
+      clock-names = "sw_sdio";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
index af7442f73881..6c40611405a0 100644
--- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
@@ -8,20 +8,19 @@ title: Cadence SD/SDIO/eMMC Host Controller (SD4HC)
 
 maintainers:
   - Masahiro Yamada <yamada.masahiro@socionext.com>
-  - Piotr Sroka <piotrs@cadence.com>
-
-allOf:
-  - $ref: mmc-controller.yaml
 
 properties:
   compatible:
     items:
       - enum:
+          - amd,pensando-elba-sd4hc
+          - microchip,mpfs-sd4hc
           - socionext,uniphier-sd4hc
       - const: cdns,sd4hc
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   interrupts:
     maxItems: 1
@@ -29,6 +28,9 @@ properties:
   clocks:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
   # PHY DLL input delays:
   # They are used to delay the data valid window, and align the window to
   # sampling clock. The delay starts from 5ns (for delay parameter equal to 0)
@@ -36,43 +38,43 @@ properties:
 
   cdns,phy-input-delay-sd-highspeed:
     description: Value of the delay in the input path for SD high-speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   cdns,phy-input-delay-legacy:
     description: Value of the delay in the input path for legacy timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   cdns,phy-input-delay-sd-uhs-sdr12:
     description: Value of the delay in the input path for SD UHS SDR12 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   cdns,phy-input-delay-sd-uhs-sdr25:
     description: Value of the delay in the input path for SD UHS SDR25 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   cdns,phy-input-delay-sd-uhs-sdr50:
     description: Value of the delay in the input path for SD UHS SDR50 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   cdns,phy-input-delay-sd-uhs-ddr50:
     description: Value of the delay in the input path for SD UHS DDR50 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   cdns,phy-input-delay-mmc-highspeed:
     description: Value of the delay in the input path for MMC high-speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
@@ -83,7 +85,7 @@ properties:
   # Each delay property represents the fraction of the clock period.
   # The approximate delay value will be
   # (<delay property value>/128)*sdmclk_clock_period.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
@@ -91,7 +93,7 @@ properties:
     description: |
       Value of the delay introduced on the sdclk output for all modes except
       HS200, HS400 and HS400_ES.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x7f
 
@@ -99,7 +101,7 @@ properties:
     description: |
       Value of the delay introduced on the sdclk output for HS200, HS400 and
       HS400_ES speed modes.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x7f
 
@@ -107,7 +109,7 @@ properties:
     description: |
       Value of the delay introduced on the dat_strobe input used in
       HS400 / HS400_ES speed modes.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x7f
 
@@ -117,6 +119,26 @@ required:
   - interrupts
   - clocks
 
+allOf:
+  - $ref: mmc-controller.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: amd,pensando-elba-sd4hc
+    then:
+      properties:
+        reg:
+          items:
+            - description: Host controller registers
+            - description: Elba byte-lane enable register for writes
+      required:
+        - resets
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
deleted file mode 100644
index 0419a63f73a0..000000000000
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-* Samsung Exynos specific extensions to the Synopsys Designware Mobile
-  Storage Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific
-extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210
-	  specific extensions.
-	- "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412
-	  specific extensions.
-	- "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
-	  specific extensions.
-	- "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
-	  specific extensions.
-	- "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7
-	  specific extensions.
-	- "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
-	  specific extensions having an SMU.
-
-* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
-  unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
-  ignored for Exynos4 SoC's. The valid range of divider value is 0 to 7.
-
-* samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value
-  in transmit mode and CIU clock phase shift value in receive mode for single
-  data rate mode operation. Refer notes below for the order of the cells and the
-  valid values.
-
-* samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value
-  in transmit mode and CIU clock phase shift value in receive mode for double
-  data rate mode operation. Refer notes below for the order of the cells and the
-  valid values.
-* samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase
-  shift value for hs400 mode operation.
-
-  Notes for the sdr-timing and ddr-timing values:
-
-    The order of the cells should be
-      - First Cell: CIU clock phase shift value for tx mode.
-      - Second Cell: CIU clock phase shift value for rx mode.
-
-    Valid values for SDR and DDR CIU clock timing for Exynos5250:
-      - valid value for tx phase shift and rx phase shift is 0 to 7.
-      - when CIU clock divider value is set to 3, all possible 8 phase shift
-        values can be used.
-      - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
-        phase shift clocks should be 0.
-
-* samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode
-  (Latency value for delay line in Read path)
-
-Required properties for a slot (Deprecated - Recommend to use one slot per host):
-
-* gpios: specifies a list of gpios used for command, clock and data bus. The
-  first gpio is the command line and the second gpio is the clock line. The
-  rest of the gpios (depending on the bus-width property) are the data lines in
-  no particular order. The format of the gpio specifier depends on the gpio
-  controller.
-(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
-
-Example:
-
-  The MSHC controller node can be split into two portions, SoC specific and
-  board specific portions as listed below.
-
-	dwmmc0@12200000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		reg = <0x12200000 0x1000>;
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	dwmmc0@12200000 {
-		cap-mmc-highspeed;
-		cap-sd-highspeed;
-		broken-cd;
-		fifo-depth = <0x80>;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		samsung,dw-mshc-hs400-timing = <0 2>;
-		samsung,read-strobe-delay = <90>;
-		bus-width = <8>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
index a3412f221104..fbfd822b9270 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Shawn Guo <shawnguo@kernel.org>
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: sdhci-common.yaml#
 
 description: |
   The Enhanced Secure Digital Host Controller on Freescale i.MX family
@@ -29,20 +29,66 @@ properties:
           - fsl,imx53-esdhc
           - fsl,imx6q-usdhc
           - fsl,imx6sl-usdhc
-          - fsl,imx6sll-usdhc
           - fsl,imx6sx-usdhc
-          - fsl,imx6ull-usdhc
           - fsl,imx7d-usdhc
           - fsl,imx7ulp-usdhc
+          - fsl,imx8mm-usdhc
+          - fsl,imxrt1050-usdhc
+          - nxp,s32g2-usdhc
+      - items:
+          - const: fsl,imx50-esdhc
+          - const: fsl,imx53-esdhc
+      - items:
+          - enum:
+              - fsl,imx6sll-usdhc
+              - fsl,imx6ull-usdhc
+          - const: fsl,imx6sx-usdhc
+      - items:
+          - const: fsl,imx7d-usdhc
+          - const: fsl,imx6sl-usdhc
+      - items:
+          - enum:
+              - fsl,imx8mq-usdhc
+          - const: fsl,imx7d-usdhc
+      - items:
+          - enum:
+              - fsl,imx8mn-usdhc
+              - fsl,imx8mp-usdhc
+              - fsl,imx93-usdhc
+              - fsl,imx8ulp-usdhc
+          - const: fsl,imx8mm-usdhc
+      - items:
+          - enum:
+              - fsl,imx8dxl-usdhc
+              - fsl,imx8qm-usdhc
+          - const: fsl,imx8qxp-usdhc
       - items:
           - enum:
               - fsl,imx8mm-usdhc
               - fsl,imx8mn-usdhc
               - fsl,imx8mp-usdhc
-              - fsl,imx8mq-usdhc
               - fsl,imx8qm-usdhc
               - fsl,imx8qxp-usdhc
           - const: fsl,imx7d-usdhc
+        deprecated: true
+      - items:
+          - enum:
+              - fsl,imx8mn-usdhc
+              - fsl,imx8mp-usdhc
+          - const: fsl,imx8mm-usdhc
+          - const: fsl,imx7d-usdhc
+        deprecated: true
+      - items:
+          - enum:
+              - fsl,imx8dxl-usdhc
+              - fsl,imx8qm-usdhc
+          - const: fsl,imx8qxp-usdhc
+          - const: fsl,imx7d-usdhc
+        deprecated: true
+      - items:
+          - enum:
+              - fsl,imxrt1170-usdhc
+          - const: fsl,imxrt1050-usdhc
 
   reg:
     maxItems: 1
@@ -61,12 +107,12 @@ properties:
       Specify the number of delay cells for override mode.
       This is used to set the clock delay for DLL(Delay Line) on override mode
       to select a proper data sampling window in case the clock quality is not good
-      due to signal path is too long on the board. Please refer to eSDHC/uSDHC
+      because the signal path is too long on the board. Please refer to eSDHC/uSDHC
       chapter, DLL (Delay Line) section in RM for details.
     default: 0
 
   voltage-ranges:
-    $ref: '/schemas/types.yaml#/definitions/uint32-matrix'
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
     description: |
       Specify the voltage range in case there are software transparent level
       shifters on the outputs of the controller. Two cells are required, first
@@ -90,7 +136,7 @@ properties:
       Specify the increasing delay cell steps in tuning procedure.
       The uSDHC use one delay cell as default increasing step to do tuning process.
       This property allows user to change the tuning step to more than one delay
-      cells which is useful for some special boards or cards when the default
+      cell which is useful for some special boards or cards when the default
       tuning step can't find the proper delay window within limited tuning retries.
     default: 0
 
@@ -115,6 +161,9 @@ properties:
       - const: ahb
       - const: per
 
+  power-domains:
+    maxItems: 1
+
   pinctrl-names:
     oneOf:
       - minItems: 3
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
index ffa162722b8e..221f5bc047bd 100644
--- a/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/fsl-imx-mmc.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Markus Pargmann <mpa@pengutronix.de>
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mmc/fujitsu,sdhci-fujitsu.yaml b/Documentation/devicetree/bindings/mmc/fujitsu,sdhci-fujitsu.yaml
new file mode 100644
index 000000000000..430b62899397
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/fujitsu,sdhci-fujitsu.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/fujitsu,sdhci-fujitsu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fujitsu/Socionext SDHCI controller (F_SDH30)
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: socionext,synquacer-sdhci
+          - const: fujitsu,mb86s70-sdhci-3.0
+      - enum:
+          - fujitsu,mb86s70-sdhci-3.0
+          - socionext,f-sdh30-e51-mmc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 2
+
+  resets:
+    maxItems: 1
+
+  fujitsu,cmd-dat-delay-select:
+    type: boolean
+    description: |
+      Indicating that this host requires the CMD_DAT_DELAY control to be enabled
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    sdhci1: mmc@36600000 {
+        compatible = "fujitsu,mb86s70-sdhci-3.0";
+        reg = <0x36600000 0x1000>;
+        bus-width = <4>;
+        vqmmc-supply = <&vccq_sdhci1>;
+        clocks = <&clock 2 2 0>, <&clock 2 3 0>;
+        clock-names = "iface", "core";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
deleted file mode 100644
index c54e577eea07..000000000000
--- a/Documentation/devicetree/bindings/mmc/img-dw-mshc.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Imagination specific extensions to the Synopsys Designware Mobile Storage
-  Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Imagination specific
-extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- "img,pistachio-dw-mshc": for Pistachio SoCs
-
-Example:
-
-	mmc@18142000 {
-		compatible = "img,pistachio-dw-mshc";
-		reg = <0x18142000 0x400>;
-		interrupts = <GIC_SHARED 39 IRQ_TYPE_LEVEL_HIGH>;
-
-		clocks = <&system_clk>, <&sdhost_clk>;
-		clock-names = "biu", "ciu";
-
-		fifo-depth = <0x20>;
-		bus-width = <4>;
-		disable-wp;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
index 546480f41141..bb4e0be0c893 100644
--- a/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/ingenic,mmc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/ingenic,mmc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs MMC Controller DT bindings
+title: Ingenic SoCs MMC Controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
@@ -39,14 +39,15 @@ properties:
     const: mmc
 
   dmas:
-    items:
-      - description: DMA controller phandle and request line for RX
-      - description: DMA controller phandle and request line for TX
+    minItems: 1
+    maxItems: 2
 
   dma-names:
-    items:
-      - const: rx
-      - const: tx
+    oneOf:
+      - items:
+          - const: rx
+          - const: tx
+      - const: tx-rx
 
 required:
   - compatible
@@ -61,7 +62,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
     #include <dt-bindings/dma/jz4780-dma.h>
     mmc0: mmc@13450000 {
       compatible = "ingenic,jz4780-mmc";
@@ -80,3 +81,27 @@ examples:
              <&dma JZ4780_DMA_MSC0_TX 0xffffffff>;
       dma-names = "rx", "tx";
     };
+  - |
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+    #include <dt-bindings/dma/jz4780-dma.h>
+    /*
+     * Alternative version of the example above,
+     * but using one single DMA channel for both
+     * TX and RX.
+     */
+    mmc1: mmc@13460000 {
+      compatible = "ingenic,jz4780-mmc";
+      reg = <0x13460000 0x1000>;
+
+      interrupt-parent = <&intc>;
+      interrupts = <36>;
+
+      clocks = <&cgu JZ4780_CLK_MSC1>;
+      clock-names = "mmc";
+
+      cap-sd-highspeed;
+      cap-mmc-highspeed;
+      cap-sdio-irq;
+      dmas = <&dma JZ4780_DMA_MSC1_TX JZ4780_DMA_MSC1_RX 0xffffffff>;
+      dma-names = "tx-rx";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/litex,mmc.yaml b/Documentation/devicetree/bindings/mmc/litex,mmc.yaml
new file mode 100644
index 000000000000..ef9e0da44bf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/litex,mmc.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/litex,mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteX LiteSDCard device
+
+maintainers:
+  - Gabriel Somlo <gsomlo@gmail.com>
+
+description: |
+  LiteSDCard is a small footprint, configurable SDCard core for FPGA based
+  system on chips.
+
+  The hardware source is Open Source and can be found on at
+  https://github.com/enjoy-digital/litesdcard/.
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    const: litex,mmc
+
+  reg:
+    items:
+      - description: PHY registers
+      - description: CORE registers
+      - description: DMA Reader buffer
+      - description: DMA Writer buffer
+      - description: IRQ registers
+    minItems: 4
+
+  reg-names:
+    items:
+      - const: phy
+      - const: core
+      - const: reader
+      - const: writer
+      - const: irq
+    minItems: 4
+
+  clocks:
+    maxItems: 1
+    description:
+      Handle to reference clock.
+
+  vmmc-supply:
+    description:
+      Handle to fixed-voltage supply for the card power.
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - vmmc-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    mmc: mmc@12005000 {
+        compatible = "litex,mmc";
+        reg = <0x12005000 0x100>,
+              <0x12003800 0x100>,
+              <0x12003000 0x100>,
+              <0x12004800 0x100>,
+              <0x12004000 0x100>;
+        reg-names = "phy", "core", "reader", "writer", "irq";
+        clocks = <&reference_clk>;
+        vmmc-supply = <&vreg_mmc>;
+        interrupts = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/marvell,dove-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,dove-sdhci.yaml
new file mode 100644
index 000000000000..7c9c652ad59c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,dove-sdhci.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/marvell,dove-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell sdhci-dove controller
+
+maintainers:
+  - Adrian Hunter <adrian.hunter@intel.com>
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    const: marvell,dove-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    sdio0: mmc@92000 {
+      compatible = "marvell,dove-sdhci";
+      reg = <0x92000 0x100>;
+      interrupts = <35>;
+      clocks = <&gate_clk 9>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/marvell,orion-sdio.yaml b/Documentation/devicetree/bindings/mmc/marvell,orion-sdio.yaml
new file mode 100644
index 000000000000..8a97ded15aed
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,orion-sdio.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/marvell,orion-sdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell orion-sdio controller
+
+maintainers:
+  - Nicolas Pitre <nico@fluxnic.net>
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+properties:
+  compatible:
+    const: marvell,orion-sdio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@d00d4000 {
+      compatible = "marvell,orion-sdio";
+      reg = <0xd00d4000 0x200>;
+      interrupts = <54>;
+      clocks = <&gateclk 17>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
deleted file mode 100644
index c51a62d751dc..000000000000
--- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
+++ /dev/null
@@ -1,173 +0,0 @@
-Marvell Xenon SDHCI Controller device tree bindings
-This file documents differences between the core mmc properties
-described by mmc.txt and the properties used by the Xenon implementation.
-
-Multiple SDHCs might be put into a single Xenon IP, to save size and cost.
-Each SDHC is independent and owns independent resources, such as register sets,
-clock and PHY.
-Each SDHC should have an independent device tree node.
-
-Required Properties:
-- compatible: should be one of the following
-  - "marvell,armada-3700-sdhci": For controllers on Armada-3700 SoC.
-  Must provide a second register area and marvell,pad-type.
-  - "marvell,armada-ap806-sdhci": For controllers on Armada AP806.
-  - "marvell,armada-ap807-sdhci": For controllers on Armada AP807.
-  - "marvell,armada-cp110-sdhci": For controllers on Armada CP110.
-
-- clocks:
-  Array of clocks required for SDHC.
-  Require at least input clock for Xenon IP core. For Armada AP806 and
-  CP110, the AXI clock is also mandatory.
-
-- clock-names:
-  Array of names corresponding to clocks property.
-  The input clock for Xenon IP core should be named as "core".
-  The input clock for the AXI bus must be named as "axi".
-
-- reg:
-  * For "marvell,armada-3700-sdhci", two register areas.
-    The first one for Xenon IP register. The second one for the Armada 3700 SoC
-    PHY PAD Voltage Control register.
-    Please follow the examples with compatible "marvell,armada-3700-sdhci"
-    in below.
-    Please also check property marvell,pad-type in below.
-
-  * For other compatible strings, one register area for Xenon IP.
-
-Optional Properties:
-- marvell,xenon-sdhc-id:
-  Indicate the corresponding bit index of current SDHC in
-  SDHC System Operation Control Register Bit[7:0].
-  Set/clear the corresponding bit to enable/disable current SDHC.
-  If Xenon IP contains only one SDHC, this property is optional.
-
-- marvell,xenon-phy-type:
-  Xenon support multiple types of PHYs.
-  To select eMMC 5.1 PHY, set:
-  marvell,xenon-phy-type = "emmc 5.1 phy"
-  eMMC 5.1 PHY is the default choice if this property is not provided.
-  To select eMMC 5.0 PHY, set:
-  marvell,xenon-phy-type = "emmc 5.0 phy"
-
-  All those types of PHYs can support eMMC, SD and SDIO.
-  Please note that this property only presents the type of PHY.
-  It doesn't stand for the entire SDHC type or property.
-  For example, "emmc 5.1 phy" doesn't mean that this Xenon SDHC only
-  supports eMMC 5.1.
-
-- marvell,xenon-phy-znr:
-  Set PHY ZNR value.
-  Only available for eMMC PHY.
-  Valid range = [0:0x1F].
-  ZNR is set as 0xF by default if this property is not provided.
-
-- marvell,xenon-phy-zpr:
-  Set PHY ZPR value.
-  Only available for eMMC PHY.
-  Valid range = [0:0x1F].
-  ZPR is set as 0xF by default if this property is not provided.
-
-- marvell,xenon-phy-nr-success-tun:
-  Set the number of required consecutive successful sampling points
-  used to identify a valid sampling window, in tuning process.
-  Valid range = [1:7].
-  Set as 0x4 by default if this property is not provided.
-
-- marvell,xenon-phy-tun-step-divider:
-  Set the divider for calculating TUN_STEP.
-  Set as 64 by default if this property is not provided.
-
-- marvell,xenon-phy-slow-mode:
-  If this property is selected, transfers will bypass PHY.
-  Only available when bus frequency lower than 55MHz in SDR mode.
-  Disabled by default. Please only try this property if timing issues
-  always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25,
-  SD Default Speed and HS mode and eMMC legacy speed mode.
-
-- marvell,xenon-tun-count:
-  Xenon SDHC SoC usually doesn't provide re-tuning counter in
-  Capabilities Register 3 Bit[11:8].
-  This property provides the re-tuning counter.
-  If this property is not set, default re-tuning counter will
-  be set as 0x9 in driver.
-
-- marvell,pad-type:
-  Type of Armada 3700 SoC PHY PAD Voltage Controller register.
-  Only valid when "marvell,armada-3700-sdhci" is selected.
-  Two types: "sd" and "fixed-1-8v".
-  If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning and is
-  switched to 1.8V when later in higher speed mode.
-  If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for eMMC.
-  Please follow the examples with compatible "marvell,armada-3700-sdhci"
-  in below.
-
-Example:
-- For eMMC:
-
-	sdhci@aa0000 {
-		compatible = "marvell,armada-ap806-sdhci";
-		reg = <0xaa0000 0x1000>;
-		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
-		clocks = <&emmc_clk>,<&axi_clk>;
-		clock-names = "core", "axi";
-		bus-width = <4>;
-		marvell,xenon-phy-slow-mode;
-		marvell,xenon-tun-count = <11>;
-		non-removable;
-		no-sd;
-		no-sdio;
-
-		/* Vmmc and Vqmmc are both fixed */
-	};
-
-- For SD/SDIO:
-
-	sdhci@ab0000 {
-		compatible = "marvell,armada-cp110-sdhci";
-		reg = <0xab0000 0x1000>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
-		vqmmc-supply = <&sd_vqmmc_regulator>;
-		vmmc-supply = <&sd_vmmc_regulator>;
-		clocks = <&sdclk>, <&axi_clk>;
-		clock-names = "core", "axi";
-		bus-width = <4>;
-		marvell,xenon-tun-count = <9>;
-	};
-
-- For eMMC with compatible "marvell,armada-3700-sdhci":
-
-	sdhci@aa0000 {
-		compatible = "marvell,armada-3700-sdhci";
-		reg = <0xaa0000 0x1000>,
-		      <phy_addr 0x4>;
-		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
-		clocks = <&emmcclk>;
-		clock-names = "core";
-		bus-width = <8>;
-		mmc-ddr-1_8v;
-		mmc-hs400-1_8v;
-		non-removable;
-		no-sd;
-		no-sdio;
-
-		/* Vmmc and Vqmmc are both fixed */
-
-		marvell,pad-type = "fixed-1-8v";
-	};
-
-- For SD/SDIO with compatible "marvell,armada-3700-sdhci":
-
-	sdhci@ab0000 {
-		compatible = "marvell,armada-3700-sdhci";
-		reg = <0xab0000 0x1000>,
-		      <phy_addr 0x4>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
-		vqmmc-supply = <&sd_regulator>;
-		/* Vmmc is fixed */
-		clocks = <&sdclk>;
-		clock-names = "core";
-		bus-width = <4>;
-
-		marvell,pad-type = "sd";
-	};
diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
new file mode 100644
index 000000000000..3ee758886558
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
@@ -0,0 +1,277 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Xenon SDHCI Controller
+
+description: |
+  This file documents differences between the core MMC properties described by
+  mmc-controller.yaml and the properties used by the Xenon implementation.
+
+  Multiple SDHCs might be put into a single Xenon IP, to save size and cost.
+  Each SDHC is independent and owns independent resources, such as register
+  sets, clock and PHY.
+
+  Each SDHC should have an independent device tree node.
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - marvell,armada-cp110-sdhci
+          - marvell,armada-ap806-sdhci
+
+      - items:
+          - const: marvell,armada-ap807-sdhci
+          - const: marvell,armada-ap806-sdhci
+
+      - items:
+          - const: marvell,armada-3700-sdhci
+          - const: marvell,sdhci-xenon
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    description: |
+      For "marvell,armada-3700-sdhci", two register areas.  The first one
+      for Xenon IP register. The second one for the Armada 3700 SoC PHY PAD
+      Voltage Control register.  Please follow the examples with compatible
+      "marvell,armada-3700-sdhci" in below.
+      Please also check property marvell,pad-type in below.
+
+      For other compatible strings, one register area for Xenon IP.
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: core
+      - const: axi
+
+  interrupts:
+    maxItems: 1
+
+  marvell,xenon-sdhc-id:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description: |
+      Indicate the corresponding bit index of current SDHC in SDHC System
+      Operation Control Register Bit[7:0].  Set/clear the corresponding bit to
+      enable/disable current SDHC.
+
+  marvell,xenon-phy-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - "emmc 5.1 phy"
+      - "emmc 5.0 phy"
+    description: |
+      Xenon support multiple types of PHYs. To select eMMC 5.1 PHY, set:
+      marvell,xenon-phy-type = "emmc 5.1 phy" eMMC 5.1 PHY is the default
+      choice if this property is not provided.  To select eMMC 5.0 PHY, set:
+      marvell,xenon-phy-type = "emmc 5.0 phy"
+
+      All those types of PHYs can support eMMC, SD and SDIO. Please note that
+      this property only presents the type of PHY.  It doesn't stand for the
+      entire SDHC type or property.  For example, "emmc 5.1 phy" doesn't mean
+      that this Xenon SDHC only supports eMMC 5.1.
+
+  marvell,xenon-phy-znr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+    default: 0xf
+    description: |
+      Set PHY ZNR value.
+      Only available for eMMC PHY.
+
+  marvell,xenon-phy-zpr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+    default: 0xf
+    description: |
+      Set PHY ZPR value.
+      Only available for eMMC PHY.
+
+  marvell,xenon-phy-nr-success-tun:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 7
+    default: 0x4
+    description: |
+      Set the number of required consecutive successful sampling points
+      used to identify a valid sampling window, in tuning process.
+
+  marvell,xenon-phy-tun-step-divider:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 64
+    description: |
+      Set the divider for calculating TUN_STEP.
+
+  marvell,xenon-phy-slow-mode:
+    type: boolean
+    description: |
+      If this property is selected, transfers will bypass PHY.
+      Only available when bus frequency lower than 55MHz in SDR mode.
+      Disabled by default. Please only try this property if timing issues
+      always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25,
+      SD Default Speed and HS mode and eMMC legacy speed mode.
+
+  marvell,xenon-tun-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x9
+    description: |
+      Xenon SDHC SoC usually doesn't provide re-tuning counter in
+      Capabilities Register 3 Bit[11:8].
+      This property provides the re-tuning counter.
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,armada-3700-sdhci
+
+    then:
+      properties:
+        reg:
+          items:
+            - description: Xenon IP registers
+            - description: Armada 3700 SoC PHY PAD Voltage Control register
+
+        marvell,pad-type:
+          $ref: /schemas/types.yaml#/definitions/string
+          enum:
+            - sd
+            - fixed-1-8v
+          description: |
+            Type of Armada 3700 SoC PHY PAD Voltage Controller register.
+            If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning
+            and is switched to 1.8V when later in higher speed mode.
+            If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for
+            eMMC.
+            Please follow the examples with compatible
+            "marvell,armada-3700-sdhci" in below.
+
+      required:
+        - marvell,pad-type
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - marvell,armada-cp110-sdhci
+              - marvell,armada-ap807-sdhci
+              - marvell,armada-ap806-sdhci
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: core
+            - const: axi
+
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    // For eMMC
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@aa0000 {
+      compatible = "marvell,armada-ap807-sdhci", "marvell,armada-ap806-sdhci";
+      reg = <0xaa0000 0x1000>;
+      interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&emmc_clk 0>, <&axi_clk 0>;
+      clock-names = "core", "axi";
+      bus-width = <4>;
+      marvell,xenon-phy-slow-mode;
+      marvell,xenon-tun-count = <11>;
+      non-removable;
+      no-sd;
+      no-sdio;
+
+      /* Vmmc and Vqmmc are both fixed */
+    };
+
+  - |
+    // For SD/SDIO
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@ab0000 {
+      compatible = "marvell,armada-cp110-sdhci";
+      reg = <0xab0000 0x1000>;
+      interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+      vqmmc-supply = <&sd_vqmmc_regulator>;
+      vmmc-supply = <&sd_vmmc_regulator>;
+      clocks = <&sdclk 0>, <&axi_clk 0>;
+      clock-names = "core", "axi";
+      bus-width = <4>;
+      marvell,xenon-tun-count = <9>;
+    };
+
+  - |
+    // For eMMC with compatible "marvell,armada-3700-sdhci":
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@aa0000 {
+      compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon";
+      reg = <0xaa0000 0x1000>,
+            <0x17808 0x4>;
+      interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&emmcclk 0>;
+      clock-names = "core";
+      bus-width = <8>;
+      mmc-ddr-1_8v;
+      mmc-hs400-1_8v;
+      non-removable;
+      no-sd;
+      no-sdio;
+
+      /* Vmmc and Vqmmc are both fixed */
+
+      marvell,pad-type = "fixed-1-8v";
+    };
+
+  - |
+    // For SD/SDIO with compatible "marvell,armada-3700-sdhci":
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mmc@ab0000 {
+      compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon";
+      reg = <0xab0000 0x1000>,
+            <0x17808 0x4>;
+      interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+      vqmmc-supply = <&sd_regulator>;
+      /* Vmmc is fixed */
+      clocks = <&sdclk 0>;
+      clock-names = "core";
+      bus-width = <4>;
+
+      marvell,pad-type = "sd";
+    };
diff --git a/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
index 69ff065c9a39..1f63faf17743 100644
--- a/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/microchip,dw-sparx5-sdhci.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mmc/microchip,dw-sparx5-sdhci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip Sparx5 Mobile Storage Host Controller Binding
+title: Microchip Sparx5 Mobile Storage Host Controller
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 maintainers:
   - Lars Povlsen <lars.povlsen@microchip.com>
@@ -35,7 +35,7 @@ properties:
   microchip,clock-delay:
     description: Delay clock to card to meet setup time requirements.
       Each step increase by 1.25ns.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 1
     maximum: 15
 
diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.txt b/Documentation/devicetree/bindings/mmc/mmc-card.txt
deleted file mode 100644
index 8d2d71758907..000000000000
--- a/Documentation/devicetree/bindings/mmc/mmc-card.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-mmc-card / eMMC bindings
-------------------------
-
-This documents describes the devicetree bindings for a mmc-host controller
-child node describing a mmc-card / an eMMC, see "Use of Function subnodes"
-in mmc.txt
-
-Required properties:
--compatible : Must be "mmc-card"
--reg        : Must be <0>
-
-Optional properties:
--broken-hpi : Use this to indicate that the mmc-card has a broken hpi
-              implementation, and that hpi should not be used
-
-Example:
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins_a>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <8>;
-	non-removable;
-
-	mmccard: mmccard@0 {
-		reg = <0>;
-		compatible = "mmc-card";
-		broken-hpi;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mmc/mmc-card.yaml b/Documentation/devicetree/bindings/mmc/mmc-card.yaml
new file mode 100644
index 000000000000..fd347126449a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-card.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMC Card / eMMC Generic
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+description: |
+  This documents describes the devicetree bindings for a mmc-host controller
+  child node describing a mmc-card / an eMMC.
+
+properties:
+  compatible:
+    const: mmc-card
+
+  reg:
+    const: 0
+
+  broken-hpi:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Use this to indicate that the mmc-card has a broken hpi
+      implementation, and that hpi should not be used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    mmc {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        card@0 {
+            compatible = "mmc-card";
+            reg = <0>;
+            broken-hpi;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 25ac8e200970..86c73fd825fd 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/mmc-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MMC Controller Generic Binding
+title: MMC Controller Common Properties
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
@@ -88,11 +88,18 @@ properties:
     default: 1
 
   max-frequency:
-    description:
-      Maximum operating frequency of the bus.
+    description: |
+      Maximum operating frequency of the bus:
+        - for eMMC, the maximum supported frequency is 200MHz,
+        - for SD/SDIO cards the SDR104 mode has a max supported
+          frequency of 208MHz,
+        - some mmc host controllers do support a max frequency upto
+          384MHz.
+      So, lets keep the maximum supported value here.
+
     $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 400000
-    maximum: 200000000
+    maximum: 384000000
 
   disable-wp:
     $ref: /schemas/types.yaml#/definitions/flag
@@ -286,7 +293,6 @@ properties:
     description:
       SDIO only. Preserves card power during a suspend/resume cycle.
 
-  # Deprecated: enable-sdio-wakeup
   wakeup-source:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
@@ -298,7 +304,10 @@ properties:
 
   vqmmc-supply:
     description:
-      Supply for the bus IO line power
+      Supply for the bus IO line power, such as a level shifter.
+      If the level shifter is controlled by a GPIO line, this shall
+      be modeled as a "regulator-fixed" with a GPIO line for
+      switching the level shifter on/off.
 
   mmc-pwrseq:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -333,12 +342,6 @@ patternProperties:
               subnode describes. A value of 0 denotes the memory SD
               function, values from 1 to 7 denote the SDIO functions.
 
-      broken-hpi:
-        $ref: /schemas/types.yaml#/definitions/flag
-        description:
-          Use this to indicate that the mmc-card has a broken hpi
-          implementation, and that hpi should not be used.
-
     required:
       - reg
 
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
index 1fc7e620f328..588be73168fa 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/mmc-pwrseq-emmc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Simple eMMC hardware reset provider binding
+title: Simple eMMC hardware reset provider
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
@@ -41,7 +41,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    sdhci0_pwrseq {
+    pwrseq {
       compatible = "mmc-pwrseq-emmc";
       reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
     };
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
index 9e2396751030..b35e00e8c65e 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/mmc-pwrseq-sd8787.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell SD8787 power sequence provider binding
+title: Marvell SD8787 power sequence provider
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
@@ -35,7 +35,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    wifi_pwrseq: wifi_pwrseq {
+    pwrseq {
       compatible = "mmc-pwrseq-sd8787";
       powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
       reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
index 226fb191913d..00feaafc1063 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/mmc-pwrseq-simple.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Simple MMC power sequence provider binding
+title: Simple MMC power sequence provider
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
@@ -55,7 +55,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    sdhci0_pwrseq {
+    pwrseq {
       compatible = "mmc-pwrseq-simple";
       reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
       clocks = <&clk_32768_ck>;
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
deleted file mode 100644
index 5e74db69f581..000000000000
--- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-MMC/SD/SDIO slot directly connected to a SPI bus
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the mmc_spi driver.
-
-Required properties:
-- spi-max-frequency : maximum frequency for this device (Hz).
-
-Optional properties:
-- voltage-ranges : two cells are required, first cell specifies minimum
-  slot voltage (mV), second cell specifies maximum slot voltage (mV).
-  Several ranges could be specified. If not provided, 3.2v..3.4v is assumed.
-- gpios : may specify GPIOs in this order: Card-Detect GPIO,
-  Write-Protect GPIO. Note that this does not follow the
-  binding from mmc.txt, for historical reasons.
-
-Example:
-
-	mmc-slot@0 {
-		compatible = "fsl,mpc8323rdb-mmc-slot",
-			     "mmc-spi-slot";
-		reg = <0>;
-		gpios = <&qe_pio_d 14 1
-			 &qe_pio_d 15 0>;
-		voltage-ranges = <3300 3300>;
-		spi-max-frequency = <50000000>;
-		interrupts = <42>;
-		interrupt-parent = <&PIC>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
new file mode 100644
index 000000000000..36acc40c7d18
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/mmc-spi-slot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MMC/SD/SDIO slot directly connected to a SPI bus
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+allOf:
+  - $ref: mmc-controller.yaml
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+description: |
+  The extra properties used by an mmc connected via SPI.
+
+properties:
+  compatible:
+    const: mmc-spi-slot
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  voltage-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      Two cells are required, first cell specifies minimum slot voltage (mV),
+      second cell specifies maximum slot voltage (mV).
+    items:
+      - description: |
+          value for minimum slot voltage in mV
+        default: 3200
+      - description: |
+          value for maximum slot voltage in mV
+        default: 3400
+
+  gpios:
+    description: |
+      For historical reasons, this does not follow the generic mmc-controller
+      binding.
+    minItems: 1
+    items:
+      - description: Card-Detect GPIO
+      - description: Write-Protect GPIO
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mmc@0 {
+        compatible = "mmc-spi-slot";
+        reg = <0>;
+        gpios = <&gpio 14 GPIO_ACTIVE_LOW>, <&gpio 15 GPIO_ACTIVE_HIGH>;
+        voltage-ranges = <3300 3300>;
+        spi-max-frequency = <50000000>;
+        interrupts = <42>;
+        interrupt-parent = <&PIC>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
index e866e985549e..46eefdd19a2c 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -4,15 +4,12 @@
 $id: http://devicetree.org/schemas/mmc/mtk-sd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MTK MSDC Storage Host Controller Binding
+title: MTK MSDC Storage Host Controller
 
 maintainers:
   - Chaotian Jing <chaotian.jing@mediatek.com>
   - Wenbin Mei <wenbin.mei@mediatek.com>
 
-allOf:
-  - $ref: mmc-controller.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -20,8 +17,10 @@ properties:
           - mediatek,mt2701-mmc
           - mediatek,mt2712-mmc
           - mediatek,mt6779-mmc
+          - mediatek,mt6795-mmc
           - mediatek,mt7620-mmc
           - mediatek,mt7622-mmc
+          - mediatek,mt7986-mmc
           - mediatek,mt8135-mmc
           - mediatek,mt8173-mmc
           - mediatek,mt8183-mmc
@@ -30,42 +29,52 @@ properties:
           - const: mediatek,mt7623-mmc
           - const: mediatek,mt2701-mmc
       - items:
-          - const: mediatek,mt8192-mmc
-          - const: mediatek,mt8183-mmc
-      - items:
-          - const: mediatek,mt8195-mmc
+          - enum:
+              - mediatek,mt8186-mmc
+              - mediatek,mt8188-mmc
+              - mediatek,mt8192-mmc
+              - mediatek,mt8195-mmc
+              - mediatek,mt8365-mmc
           - const: mediatek,mt8183-mmc
 
+  reg:
+    minItems: 1
+    items:
+      - description: base register (required).
+      - description: top base register (required for MT8183).
+
   clocks:
     description:
       Should contain phandle for the clock feeding the MMC controller.
     minItems: 2
-    items:
-      - description: source clock (required).
-      - description: HCLK which used for host (required).
-      - description: independent source clock gate (required for MT2712).
-      - description: bus clock used for internal register access (required for MT2712 MSDC0/3).
-      - description: msdc subsys clock gate (required for MT8192).
-      - description: peripheral bus clock gate (required for MT8192).
-      - description: AXI bus clock gate (required for MT8192).
-      - description: AHB bus clock gate (required for MT8192).
+    maxItems: 7
 
   clock-names:
     minItems: 2
+    maxItems: 7
+
+  interrupts:
+    description:
+      Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended
+      interrupt is required and be configured as wakeup source irq.
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
     items:
-      - const: source
-      - const: hclk
-      - const: source_cg
-      - const: bus_clk
-      - const: sys_cg
-      - const: pclk_cg
-      - const: axi_cg
-      - const: ahb_cg
+      - const: msdc
+      - const: sdio_wakeup
 
   pinctrl-names:
+    description:
+      Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin
+      will be switched between GPIO mode and SDIO DAT1 mode, state_eint is mandatory in this
+      scenario.
+    minItems: 2
     items:
       - const: default
       - const: state_uhs
+      - const: state_eint
 
   pinctrl-0:
     description:
@@ -77,6 +86,11 @@ properties:
       should contain uhs mode pin ctrl.
     maxItems: 1
 
+  pinctrl-2:
+    description:
+      should switch dat1 pin to GPIO mode.
+    maxItems: 1
+
   assigned-clocks:
     description:
       PLL of the source clock.
@@ -119,6 +133,18 @@ properties:
       If present, HS400 command responses are sampled on rising edges.
       If not present, HS400 command responses are sampled on falling edges.
 
+  mediatek,hs400-ds-dly3:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Gear of the third delay line for DS for input data latch in data
+      pad macro, there are 32 stages from 0 to 31.
+      For different corner IC, the time is different about one step, it is
+      about 100ps.
+      The value is confirmed by doing scan and calibration to find a best
+      value with corner IC and it is valid only for HS400 mode.
+    minimum: 0
+    maximum: 31
+
   mediatek,latch-ck:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -147,6 +173,145 @@ required:
   - vmmc-supply
   - vqmmc-supply
 
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt2701-mmc
+            - mediatek,mt6779-mmc
+            - mediatek,mt6795-mmc
+            - mediatek,mt7620-mmc
+            - mediatek,mt7622-mmc
+            - mediatek,mt7623-mmc
+            - mediatek,mt8135-mmc
+            - mediatek,mt8173-mmc
+            - mediatek,mt8183-mmc
+            - mediatek,mt8186-mmc
+            - mediatek,mt8188-mmc
+            - mediatek,mt8195-mmc
+            - mediatek,mt8516-mmc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+        clock-names:
+          minItems: 2
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt2712-mmc
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: bus clock used for internal register access (required for MSDC0/3).
+        clock-names:
+          minItems: 3
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: bus_clk
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8183-mmc
+    then:
+      properties:
+        reg:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt7986-mmc
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: bus clock used for internal register access (required for MSDC0/3).
+            - description: msdc subsys clock gate
+        clock-names:
+          minItems: 3
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: bus_clk
+            - const: sys_cg
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mediatek,mt8186-mmc
+            - mediatek,mt8188-mmc
+            - mediatek,mt8195-mmc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: crypto clock used for data encrypt/decrypt (optional)
+        clock-names:
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: crypto
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8192-mmc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: source clock
+            - description: HCLK which used for host
+            - description: independent source clock gate
+            - description: msdc subsys clock gate
+            - description: peripheral bus clock gate
+            - description: AXI bus clock gate
+            - description: AHB bus clock gate
+        clock-names:
+          items:
+            - const: source
+            - const: hclk
+            - const: source_cg
+            - const: sys_cg
+            - const: pclk_cg
+            - const: axi_cg
+            - const: ahb_cg
+
 unevaluatedProperties: false
 
 examples:
@@ -174,4 +339,32 @@ examples:
         mediatek,hs400-cmd-resp-sel-rising;
     };
 
+    mmc3: mmc@11260000 {
+        compatible = "mediatek,mt8173-mmc";
+        reg = <0x11260000 0x1000>;
+        clock-names = "source", "hclk";
+        clocks = <&pericfg CLK_PERI_MSDC30_3>,
+                 <&topckgen CLK_TOP_MSDC50_2_H_SEL>;
+        interrupt-names = "msdc", "sdio_wakeup";
+        interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_LOW 0>,
+                     <&pio 23 IRQ_TYPE_LEVEL_LOW>;
+        pinctrl-names = "default", "state_uhs", "state_eint";
+        pinctrl-0 = <&mmc2_pins_default>;
+        pinctrl-1 = <&mmc2_pins_uhs>;
+        pinctrl-2 = <&mmc2_pins_eint>;
+        bus-width = <4>;
+        max-frequency = <200000000>;
+        cap-sd-highspeed;
+        sd-uhs-sdr104;
+        keep-power-in-suspend;
+        wakeup-source;
+        cap-sdio-irq;
+        no-mmc;
+        no-sd;
+        non-removable;
+        vmmc-supply = <&sdio_fixed_3v3>;
+        vqmmc-supply = <&mt6397_vgp3_reg>;
+        mmc-pwrseq = <&wifi_pwrseq>;
+    };
+
 ...
diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
index bec8f8c71ff2..32e512a68ed6 100644
--- a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
@@ -17,7 +17,7 @@ description: |
   and the properties used by the mxsmmc driver.
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
deleted file mode 100644
index 96c0b1440c9c..000000000000
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ /dev/null
@@ -1,143 +0,0 @@
-* NVIDIA Tegra Secure Digital Host Controller
-
-This controller on Tegra family SoCs provides an interface for MMC, SD,
-and SDIO types of memory cards.
-
-This file documents differences between the core properties described
-by mmc.txt and the properties used by the sdhci-tegra driver.
-
-Required properties:
-- compatible : should be one of:
-  - "nvidia,tegra20-sdhci": for Tegra20
-  - "nvidia,tegra30-sdhci": for Tegra30
-  - "nvidia,tegra114-sdhci": for Tegra114
-  - "nvidia,tegra124-sdhci": for Tegra124 and Tegra132
-  - "nvidia,tegra210-sdhci": for Tegra210
-  - "nvidia,tegra186-sdhci": for Tegra186
-  - "nvidia,tegra194-sdhci": for Tegra194
-- clocks: For Tegra210, Tegra186 and Tegra194 must contain two entries.
-	  One for the module clock and one for the timeout clock.
-	  For all other Tegra devices, must contain a single entry for
-	  the module clock. See ../clocks/clock-bindings.txt for details.
-- clock-names: For Tegra210, Tegra186 and Tegra194 must contain the
-	       strings 'sdhci' and 'tmclk' to represent the module and
-	       the timeout clocks, respectively.
-	       For all other Tegra devices must contain the string 'sdhci'
-	       to represent the module clock.
-- resets : Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names : Must include the following entries:
-  - sdhci
-
-Optional properties:
-- power-gpios : Specify GPIOs for power control
-
-Example:
-
-sdhci@c8000200 {
-	compatible = "nvidia,tegra20-sdhci";
-	reg = <0xc8000200 0x200>;
-	interrupts = <47>;
-	clocks = <&tegra_car 14>;
-	resets = <&tegra_car 14>;
-	reset-names = "sdhci";
-	cd-gpios = <&gpio 69 0>; /* gpio PI5 */
-	wp-gpios = <&gpio 57 0>; /* gpio PH1 */
-	power-gpios = <&gpio 155 0>; /* gpio PT3 */
-	bus-width = <8>;
-};
-
-Optional properties for Tegra210, Tegra186 and Tegra194:
-- pinctrl-names, pinctrl-0, pinctrl-1 : Specify pad voltage
-  configurations. Valid pinctrl-names are "sdmmc-3v3" and "sdmmc-1v8"
-  for controllers supporting multiple voltage levels. The order of names
-  should correspond to the pin configuration states in pinctrl-0 and
-  pinctrl-1.
-- pinctrl-names : "sdmmc-3v3-drv" and "sdmmc-1v8-drv" are applicable for
-  Tegra210 where pad config registers are in the pinmux register domain
-  for pull-up-strength and pull-down-strength values configuration when
-  using pads at 3V3 and 1V8 levels.
-- nvidia,only-1-8-v : The presence of this property indicates that the
-  controller operates at a 1.8 V fixed I/O voltage.
-- nvidia,pad-autocal-pull-up-offset-3v3,
-  nvidia,pad-autocal-pull-down-offset-3v3 : Specify drive strength
-  calibration offsets for 3.3 V signaling modes.
-- nvidia,pad-autocal-pull-up-offset-1v8,
-  nvidia,pad-autocal-pull-down-offset-1v8 : Specify drive strength
-  calibration offsets for 1.8 V signaling modes.
-- nvidia,pad-autocal-pull-up-offset-3v3-timeout,
-  nvidia,pad-autocal-pull-down-offset-3v3-timeout : Specify drive
-  strength used as a fallback in case the automatic calibration times
-  out on a 3.3 V signaling mode.
-- nvidia,pad-autocal-pull-up-offset-1v8-timeout,
-  nvidia,pad-autocal-pull-down-offset-1v8-timeout : Specify drive
-  strength used as a fallback in case the automatic calibration times
-  out on a 1.8 V signaling mode.
-- nvidia,pad-autocal-pull-up-offset-sdr104,
-  nvidia,pad-autocal-pull-down-offset-sdr104 : Specify drive strength
-  calibration offsets for SDR104 mode.
-- nvidia,pad-autocal-pull-up-offset-hs400,
-  nvidia,pad-autocal-pull-down-offset-hs400 : Specify drive strength
-  calibration offsets for HS400 mode.
-- nvidia,default-tap : Specify the default inbound sampling clock
-  trimmer value for non-tunable modes.
-- nvidia,default-trim : Specify the default outbound clock trimmer
-  value.
-- nvidia,dqs-trim : Specify DQS trim value for HS400 timing
-
-  Notes on the pad calibration pull up and pulldown offset values:
-    - The property values are drive codes which are programmed into the
-      PD_OFFSET and PU_OFFSET sections of the
-      SDHCI_TEGRA_AUTO_CAL_CONFIG register.
-    - A higher value corresponds to higher drive strength. Please refer
-      to the reference manual of the SoC for correct values.
-    - The SDR104 and HS400 timing specific values are used in
-      corresponding modes if specified.
-
-  Notes on tap and trim values:
-    - The values are used for compensating trace length differences
-      by adjusting the sampling point.
-    - The values are programmed to the Vendor Clock Control Register.
-      Please refer to the reference manual of the SoC for correct
-      values.
-    - The DQS trim values are only used on controllers which support
-      HS400 timing. Only SDMMC4 on Tegra210 and Tegra 186 supports
-      HS400.
-
-Example:
-sdhci@700b0000 {
-	compatible = "nvidia,tegra124-sdhci";
-	reg = <0x0 0x700b0000 0x0 0x200>;
-	interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
-	clock-names = "sdhci";
-	resets = <&tegra_car 14>;
-	reset-names = "sdhci";
-	pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
-	pinctrl-0 = <&sdmmc1_3v3>;
-	pinctrl-1 = <&sdmmc1_1v8>;
-	nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
-	nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
-	nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
-	nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
-	status = "disabled";
-};
-
-sdhci@700b0000 {
-	compatible = "nvidia,tegra210-sdhci";
-	reg = <0x0 0x700b0000 0x0 0x200>;
-	interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
-		 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
-	clock-names = "sdhci", "tmclk";
-	resets = <&tegra_car 14>;
-	reset-names = "sdhci";
-	pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
-	pinctrl-0 = <&sdmmc1_3v3>;
-	pinctrl-1 = <&sdmmc1_1v8>;
-	nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
-	nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
-	nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
-	nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
-	status = "disabled";
-};
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml
new file mode 100644
index 000000000000..72987f0326a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml
@@ -0,0 +1,313 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/nvidia,tegra20-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Secure Digital Host Controller
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+description: |
+  This controller on Tegra family SoCs provides an interface for MMC, SD, and
+  SDIO types of memory cards.
+
+  This file documents differences between the core properties described by
+  mmc-controller.yaml and the properties for the Tegra SDHCI controller.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nvidia,tegra20-sdhci
+          - nvidia,tegra30-sdhci
+          - nvidia,tegra114-sdhci
+          - nvidia,tegra124-sdhci
+          - nvidia,tegra210-sdhci
+          - nvidia,tegra186-sdhci
+          - nvidia,tegra194-sdhci
+
+      - items:
+          - const: nvidia,tegra132-sdhci
+          - const: nvidia,tegra124-sdhci
+
+      - items:
+          - enum:
+              - nvidia,tegra194-sdhci
+              - nvidia,tegra234-sdhci
+          - const: nvidia,tegra186-sdhci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+
+  resets:
+    items:
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: sdhci
+
+  power-gpios:
+    description: specify GPIOs for power control
+    maxItems: 1
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  operating-points-v2: true
+
+  power-domains:
+    items:
+      - description: phandle to the core power domain
+
+  nvidia,default-tap:
+    description: Specify the default inbound sampling clock trimmer value for
+      non-tunable modes.
+
+      The values are used for compensating trace length differences by
+      adjusting the sampling point. The values are programmed to the Vendor
+      Clock Control Register. Please refer to the reference manual of the SoC
+      for correct values.
+
+      The DQS trim values are only used on controllers which support HS400
+      timing. Only SDMMC4 on Tegra210 and Tegra186 supports HS400.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,default-trim:
+    description: Specify the default outbound clock trimmer value.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,dqs-trim:
+    description: Specify DQS trim value for HS400 timing.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-down-offset-1v8:
+    description: Specify drive strength calibration offsets for 1.8 V
+      signaling modes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-down-offset-1v8-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 1.8 V signaling mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-down-offset-3v3:
+    description: Specify drive strength calibration offsets for 3.3 V
+      signaling modes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-down-offset-3v3-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 3.3 V signaling mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-down-offset-sdr104:
+    description: Specify drive strength calibration offsets for SDR104 mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-down-offset-hs400:
+    description: Specify drive strength calibration offsets for HS400 mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-up-offset-1v8:
+    description: Specify drive strength calibration offsets for 1.8 V
+      signaling modes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-up-offset-1v8-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 1.8 V signaling mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-up-offset-3v3:
+    description: Specify drive strength calibration offsets for 3.3 V
+      signaling modes.
+
+      The property values are drive codes which are programmed into the
+      PD_OFFSET and PU_OFFSET sections of the SDHCI_TEGRA_AUTO_CAL_CONFIG
+      register. A higher value corresponds to higher drive strength. Please
+      refer to the reference manual of the SoC for correct values. The SDR104
+      and HS400 timing specific values are used in corresponding modes if
+      specified.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-up-offset-3v3-timeout:
+    description: Specify drive strength used as a fallback in case the
+      automatic calibration times out on a 3.3 V signaling mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-up-offset-sdr104:
+    description: Specify drive strength calibration offsets for SDR104 mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,pad-autocal-pull-up-offset-hs400:
+    description: Specify drive strength calibration offsets for HS400 mode.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  nvidia,only-1-8v:
+    description: The presence of this property indicates that the controller
+      operates at a 1.8 V fixed I/O voltage.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: mmc-controller.yaml
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra20-sdhci
+              - nvidia,tegra30-sdhci
+              - nvidia,tegra114-sdhci
+              - nvidia,tegra124-sdhci
+    then:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+    else:
+      properties:
+        clocks:
+          items:
+            - description: module clock
+            - description: timeout clock
+
+        clock-names:
+          items:
+            - const: sdhci
+            - const: tmclk
+      required:
+        - clock-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nvidia,tegra210-sdhci
+    then:
+      properties:
+        pinctrl-names:
+          oneOf:
+            - items:
+                - const: sdmmc-3v3
+                  description: pad configuration for 3.3 V
+                - const: sdmmc-1v8
+                  description: pad configuration for 1.8 V
+                - const: sdmmc-3v3-drv
+                  description: pull-up/down configuration for 3.3 V
+                - const: sdmmc-1v8-drv
+                  description: pull-up/down configuration for 1.8 V
+            - items:
+                - const: sdmmc-3v3-drv
+                  description: pull-up/down configuration for 3.3 V
+                - const: sdmmc-1v8-drv
+                  description: pull-up/down configuration for 1.8 V
+            - items:
+                - const: sdmmc-1v8-drv
+                  description: pull-up/down configuration for 1.8 V
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra186-sdhci
+              - nvidia,tegra194-sdhci
+    then:
+      properties:
+        pinctrl-names:
+          items:
+            - const: sdmmc-3v3
+              description: pad configuration for 3.3 V
+            - const: sdmmc-1v8
+              description: pad configuration for 1.8 V
+      required:
+        - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@c8000200 {
+        compatible = "nvidia,tegra20-sdhci";
+        reg = <0xc8000200 0x200>;
+        interrupts = <47>;
+        clocks = <&tegra_car 14>;
+        resets = <&tegra_car 14>;
+        reset-names = "sdhci";
+        cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+        wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+        power-gpios = <&gpio 155 0>; /* gpio PT3 */
+        bus-width = <8>;
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra210-car.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@700b0000 {
+        compatible = "nvidia,tegra210-sdhci";
+        reg = <0x700b0000 0x200>;
+        interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+                 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+        clock-names = "sdhci", "tmclk";
+        resets = <&tegra_car 14>;
+        reset-names = "sdhci";
+        pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
+                        "sdmmc-3v3-drv", "sdmmc-1v8-drv";
+        pinctrl-0 = <&sdmmc1_3v3>;
+        pinctrl-1 = <&sdmmc1_1v8>;
+        pinctrl-2 = <&sdmmc1_3v3_drv>;
+        pinctrl-3 = <&sdmmc1_1v8_drv>;
+        nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+        nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+        nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+        nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+        nvidia,default-tap = <0x2>;
+        nvidia,default-trim = <0x4>;
+        assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+                          <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>,
+                          <&tegra_car TEGRA210_CLK_PLL_C4>;
+        assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+        assigned-clock-rates = <200000000>, <1000000000>, <1000000000>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/orion-sdio.txt b/Documentation/devicetree/bindings/mmc/orion-sdio.txt
deleted file mode 100644
index 10f0818a34c5..000000000000
--- a/Documentation/devicetree/bindings/mmc/orion-sdio.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-* Marvell orion-sdio controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the orion-sdio driver.
-
-- compatible: Should be "marvell,orion-sdio"
-- clocks: reference to the clock of the SDIO interface
-
-Example:
-
-	mvsdio@d00d4000 {
-		compatible = "marvell,orion-sdio";
-		reg = <0xd00d4000 0x200>;
-		interrupts = <54>;
-		clocks = <&gateclk 17>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
index b0d81ebe0f6e..1b7d88ed3799 100644
--- a/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
+++ b/Documentation/devicetree/bindings/mmc/owl-mmc.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Actions Semi Owl SoCs SD/MMC/SDIO controller
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml b/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml
index c36ba561c387..024313b79ec9 100644
--- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml
+++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Wolfram Sang <wsa+renesas@sang-engineering.com>
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
index 9f1e7092cf44..7756a8687eaf 100644
--- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
+++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mmc/renesas,sdhi.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mmc/renesas,sdhi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Renesas SDHI SD/MMC controller
 
@@ -56,9 +56,17 @@ properties:
               - renesas,sdhi-r8a77980  # R-Car V3H
               - renesas,sdhi-r8a77990  # R-Car E3
               - renesas,sdhi-r8a77995  # R-Car D3
-              - renesas,sdhi-r8a779a0  # R-Car V3U
+              - renesas,sdhi-r9a07g043 # RZ/G2UL
               - renesas,sdhi-r9a07g044 # RZ/G2{L,LC}
+              - renesas,sdhi-r9a07g054 # RZ/V2L
+              - renesas,sdhi-r9a09g011 # RZ/V2M
           - const: renesas,rcar-gen3-sdhi # R-Car Gen3 or RZ/G2
+      - items:
+          - enum:
+              - renesas,sdhi-r8a779a0  # R-Car V3U
+              - renesas,sdhi-r8a779f0  # R-Car S4-8
+              - renesas,sdhi-r8a779g0  # R-Car V4H
+          - const: renesas,rcar-gen4-sdhi # R-Car Gen4
 
   reg:
     maxItems: 1
@@ -83,6 +91,9 @@ properties:
         - tx
         - rx
 
+  iommus:
+    maxItems: 1
+
   power-domains:
     maxItems: 1
 
@@ -101,43 +112,68 @@ properties:
   max-frequency: true
 
 allOf:
-  - $ref: "mmc-controller.yaml"
+  - $ref: mmc-controller.yaml
 
   - if:
       properties:
         compatible:
           contains:
-            const: renesas,sdhi-r9a07g044
+            enum:
+              - renesas,sdhi-r9a07g043
+              - renesas,sdhi-r9a07g044
+              - renesas,sdhi-r9a07g054
+              - renesas,sdhi-r9a09g011
     then:
       properties:
         clocks:
           items:
             - description: IMCLK, SDHI channel main clock1.
+            - description: CLK_HS, SDHI channel High speed clock which operates
+                           4 times that of SDHI channel main clock1.
             - description: IMCLK2, SDHI channel main clock2. When this clock is
                            turned off, external SD card detection cannot be
                            detected.
-            - description: CLK_HS, SDHI channel High speed clock which operates
-                           4 times that of SDHI channel main clock1.
             - description: ACLK, SDHI channel bus clock.
         clock-names:
           items:
-            - const: imclk
-            - const: imclk2
-            - const: clk_hs
+            - const: core
+            - const: clkh
+            - const: cd
             - const: aclk
       required:
         - clock-names
         - resets
     else:
-      properties:
-        clocks:
-          minItems: 1
-          maxItems: 2
-        clock-names:
-          minItems: 1
-          items:
-            - const: core
-            - const: cd
+      if:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - renesas,rcar-gen2-sdhi
+                - renesas,rcar-gen3-sdhi
+                - renesas,rcar-gen4-sdhi
+      then:
+        properties:
+          clocks:
+            minItems: 1
+            maxItems: 3
+          clock-names:
+            minItems: 1
+            uniqueItems: true
+            items:
+              - const: core
+              - enum: [ clkh, cd ]
+              - const: cd
+      else:
+        properties:
+          clocks:
+            minItems: 1
+            maxItems: 2
+          clock-names:
+            minItems: 1
+            items:
+              - const: core
+              - const: cd
 
   - if:
       properties:
diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
index 54fb59820d2b..211cd0b0bc5f 100644
--- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
+++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/rockchip-dw-mshc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip designware mobile storage host controller device tree bindings
+title: Rockchip designware mobile storage host controller
 
 description:
   Rockchip uses the Synopsys designware mobile storage host controller
@@ -14,7 +14,7 @@ description:
   file and the Rockchip specific extensions.
 
 allOf:
-  - $ref: "synopsys-dw-mshc-common.yaml#"
+  - $ref: synopsys-dw-mshc-common.yaml#
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
@@ -32,13 +32,16 @@ properties:
               - rockchip,px30-dw-mshc
               - rockchip,rk1808-dw-mshc
               - rockchip,rk3036-dw-mshc
+              - rockchip,rk3128-dw-mshc
               - rockchip,rk3228-dw-mshc
               - rockchip,rk3308-dw-mshc
               - rockchip,rk3328-dw-mshc
               - rockchip,rk3368-dw-mshc
               - rockchip,rk3399-dw-mshc
               - rockchip,rk3568-dw-mshc
+              - rockchip,rk3588-dw-mshc
               - rockchip,rv1108-dw-mshc
+              - rockchip,rv1126-dw-mshc
           - const: rockchip,rk3288-dw-mshc
 
   reg:
@@ -69,6 +72,9 @@ properties:
       to control the clock phases, "ciu-sample" is required for tuning
       high speed modes.
 
+  power-domains:
+    maxItems: 1
+
   rockchip,default-sample-phase:
     $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
diff --git a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
new file mode 100644
index 000000000000..6ee78a38bd74
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/samsung,exynos-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Samsung Exynos SoC specific extensions to the Synopsys Designware Mobile
+  Storage Host Controller
+
+maintainers:
+  - Jaehoon Chung <jh80.chung@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos4210-dw-mshc
+      - samsung,exynos4412-dw-mshc
+      - samsung,exynos5250-dw-mshc
+      - samsung,exynos5420-dw-mshc
+      - samsung,exynos5420-dw-mshc-smu
+      - samsung,exynos7-dw-mshc
+      - samsung,exynos7-dw-mshc-smu
+      - axis,artpec8-dw-mshc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+    description:
+      Handle to "biu" and "ciu" clocks for the
+      bus interface unit clock and the card interface unit clock.
+
+  clock-names:
+    items:
+      - const: biu
+      - const: ciu
+
+  samsung,dw-mshc-ciu-div:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 7
+    description:
+      The divider value for the card interface unit (ciu) clock.
+
+  samsung,dw-mshc-ddr-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CIU clock phase shift value for tx mode
+        minimum: 0
+        maximum: 7
+      - description: CIU clock phase shift value for rx mode
+        minimum: 0
+        maximum: 7
+    description:
+      The value of CUI clock phase shift value in transmit mode and CIU clock
+      phase shift value in receive mode for double data rate mode operation.
+      See also samsung,dw-mshc-hs400-timing property.
+
+  samsung,dw-mshc-hs400-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CIU clock phase shift value for tx mode
+        minimum: 0
+        maximum: 7
+      - description: CIU clock phase shift value for rx mode
+        minimum: 0
+        maximum: 7
+    description: |
+      The value of CIU TX and RX clock phase shift value for HS400 mode
+      operation.
+      Valid values for SDR and DDR CIU clock timing::
+        - valid value for tx phase shift and rx phase shift is 0 to 7.
+        - when CIU clock divider value is set to 3, all possible 8 phase shift
+          values can be used.
+        - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
+          phase shift clocks should be 0.
+      If missing, values from samsung,dw-mshc-ddr-timing property are used.
+
+  samsung,dw-mshc-sdr-timing:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CIU clock phase shift value for tx mode
+        minimum: 0
+        maximum: 7
+      - description: CIU clock phase shift value for rx mode
+        minimum: 0
+        maximum: 7
+    description:
+      The value of CIU clock phase shift value in transmit mode and CIU clock
+      phase shift value in receive mode for single data rate mode operation.
+      See also samsung,dw-mshc-hs400-timing property.
+
+  samsung,read-strobe-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      RCLK (Data strobe) delay to control HS400 mode (Latency value for delay
+      line in Read path). If missing, default from hardware is used.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - samsung,dw-mshc-ddr-timing
+  - samsung,dw-mshc-sdr-timing
+
+allOf:
+  - $ref: synopsys-dw-mshc-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos5250-dw-mshc
+              - samsung,exynos5420-dw-mshc
+              - samsung,exynos7-dw-mshc
+              - samsung,exynos7-dw-mshc-smu
+              - axis,artpec8-dw-mshc
+    then:
+      required:
+        - samsung,dw-mshc-ciu-div
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5420.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@12220000 {
+        compatible = "samsung,exynos5420-dw-mshc";
+        interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0x12220000 0x1000>;
+        clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+        clock-names = "biu", "ciu";
+        fifo-depth = <0x40>;
+        card-detect-delay = <200>;
+        samsung,dw-mshc-ciu-div = <3>;
+        samsung,dw-mshc-sdr-timing = <0 4>;
+        samsung,dw-mshc-ddr-timing = <0 2>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>;
+        bus-width = <4>;
+        cap-sd-highspeed;
+        max-frequency = <200000000>;
+        vmmc-supply = <&ldo19_reg>;
+        vqmmc-supply = <&ldo13_reg>;
+        sd-uhs-sdr50;
+        sd-uhs-sdr104;
+        sd-uhs-ddr50;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
new file mode 100644
index 000000000000..5d873a60f650
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/samsung,s3c6410-sdhci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC SDHCI Controller
+
+maintainers:
+  - Jaehoon Chung <jh80.chung@samsung.com>
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - samsung,s3c6410-sdhci
+      - samsung,exynos4210-sdhci
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 5
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: hsmmc
+      - pattern: "^mmc_busclk.[0-3]$"
+      - pattern: "^mmc_busclk.[0-3]$"
+      - pattern: "^mmc_busclk.[0-3]$"
+      - pattern: "^mmc_busclk.[0-3]$"
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+allOf:
+  - $ref: mmc-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,exynos4210-sdhci
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: hsmmc
+            - const: mmc_busclk.2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos4.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    mmc@12510000 {
+        compatible = "samsung,exynos4210-sdhci";
+        reg = <0x12510000 0x100>;
+        interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
+        clock-names = "hsmmc", "mmc_busclk.2";
+        bus-width = <4>;
+        cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+        pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
+        pinctrl-names = "default";
+        vmmc-supply = <&ldo21_reg>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
deleted file mode 100644
index 5f68feb9f9d6..000000000000
--- a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings
-
-Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface
-with external MMC, SD and SDIO storage mediums.
-
-This file documents differences between the core mmc properties described by
-mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller
-implementation.
-
-Required SoC Specific Properties:
-- compatible: should be one of the following
-  - "samsung,s3c2410-sdi": for controllers compatible with s3c2410
-  - "samsung,s3c2412-sdi": for controllers compatible with s3c2412
-  - "samsung,s3c2440-sdi": for controllers compatible with s3c2440
-- reg: register location and length
-- interrupts: mmc controller interrupt
-- clocks: Should reference the controller clock
-- clock-names: Should contain "sdi"
-
-Required Board Specific Properties:
-- pinctrl-0: Should specify pin control groups used for this controller.
-- pinctrl-names: Should contain only one value - "default".
-
-Optional Properties:
-- bus-width: number of data lines (see mmc.txt)
-- cd-gpios: gpio for card detection (see mmc.txt)
-- wp-gpios: gpio for write protection (see mmc.txt)
-
-Example:
-
-	mmc0: mmc@5a000000 {
-		compatible = "samsung,s3c2440-sdi";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdi_pins>;
-		reg = <0x5a000000 0x100000>;
-		interrupts = <0 0 21 3>;
-		clocks = <&clocks PCLK_SDI>;
-		clock-names = "sdi";
-		bus-width = <4>;
-		cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
deleted file mode 100644
index 42e0a9afa100..000000000000
--- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Samsung's SDHCI Controller device tree bindings
-
-Samsung's SDHCI controller is used as a connectivity interface with external
-MMC, SD and eMMC storage mediums. This file documents differences between the
-core mmc properties described by mmc.txt and the properties used by the
-Samsung implementation of the SDHCI controller.
-
-Required SoC Specific Properties:
-- compatible: should be one of the following
-  - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci
-    controller.
-  - "samsung,exynos4210-sdhci": For controllers compatible with Exynos4 sdhci
-    controller.
-
-Required Board Specific Properties:
-- pinctrl-0: Should specify pin control groups used for this controller.
-- pinctrl-names: Should contain only one value - "default".
-
-Example:
-	sdhci@12530000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12530000 0x100>;
-		interrupts = <0 75 0>;
-		bus-width = <4>;
-		cd-gpios = <&gpk2 2 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
-	};
-
-	Note: This example shows both SoC specific and board specific properties
-	in a single device node. The properties can be actually be separated
-	into SoC specific node and board specific node.
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
index 224303f5b913..676a74695389 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/mmc/sdhci-am654.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/mmc/sdhci-am654.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TI AM654 MMC Controller
 
@@ -11,16 +11,18 @@ maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
 
 allOf:
-  - $ref: mmc-controller.yaml#
+  - $ref: sdhci-common.yaml#
 
 properties:
   compatible:
     oneOf:
-      - const: ti,am654-sdhci-5.1
-      - const: ti,j721e-sdhci-8bit
-      - const: ti,j721e-sdhci-4bit
-      - const: ti,am64-sdhci-8bit
-      - const: ti,am64-sdhci-4bit
+      - enum:
+          - ti,am62-sdhci
+          - ti,am64-sdhci-4bit
+          - ti,am64-sdhci-8bit
+          - ti,am654-sdhci-5.1
+          - ti,j721e-sdhci-4bit
+          - ti,j721e-sdhci-8bit
       - items:
           - const: ti,j7200-sdhci-8bit
           - const: ti,j721e-sdhci-8bit
@@ -48,6 +50,9 @@ properties:
       - const: clk_ahb
       - const: clk_xin
 
+  dma-coherent:
+    type: boolean
+
   # PHY output tap delays:
   # Used to delay the data valid window and align it to the sampling clock.
   # Binding needs to be provided for each supported speed mode otherwise the
@@ -55,67 +60,67 @@ properties:
 
   ti,otap-del-sel-legacy:
     description: Output tap delay for SD/MMC legacy timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-mmc-hs:
     description: Output tap delay for MMC high speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-sd-hs:
     description: Output tap delay for SD high speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-sdr12:
     description: Output tap delay for SD UHS SDR12 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-sdr25:
     description: Output tap delay for SD UHS SDR25 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-sdr50:
     description: Output tap delay for SD UHS SDR50 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-sdr104:
     description: Output tap delay for SD UHS SDR104 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-ddr50:
     description: Output tap delay for SD UHS DDR50 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-ddr52:
     description: Output tap delay for eMMC DDR52 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-hs200:
     description: Output tap delay for eMMC HS200 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,otap-del-sel-hs400:
     description: Output tap delay for eMMC HS400 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
@@ -125,49 +130,55 @@ properties:
 
   ti,itap-del-sel-legacy:
     description: Input tap delay for SD/MMC legacy timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,itap-del-sel-mmc-hs:
     description: Input tap delay for MMC high speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,itap-del-sel-sd-hs:
     description: Input tap delay for SD high speed timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,itap-del-sel-sdr12:
     description: Input tap delay for SD UHS SDR12 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,itap-del-sel-sdr25:
     description: Input tap delay for SD UHS SDR25 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0
+    maximum: 0x1f
+
+  ti,itap-del-sel-ddr50:
+    description: Input tap delay for MMC DDR50 timing
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,itap-del-sel-ddr52:
     description: Input tap delay for MMC DDR52 timing
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0x1f
 
   ti,trm-icp:
     description: DLL trim select
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 0
     maximum: 0xf
 
   ti,driver-strength-ohm:
     description: DLL drive strength in ohms
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum:
       - 33
       - 40
@@ -177,11 +188,18 @@ properties:
 
   ti,strobe-sel:
     description: strobe select delay for HS400 speed mode.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   ti,clkbuf-sel:
     description: Clock Delay Buffer Select
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ti,fails-without-test-cd:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      When present, indicates that the CD line is not connected
+      and the controller is required to be forced into Test mode
+      to set the TESTCD bit.
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-common.yaml b/Documentation/devicetree/bindings/mmc/sdhci-common.yaml
new file mode 100644
index 000000000000..1664615187c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-common.yaml
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sdhci-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SDHCI Controller Common Properties
+
+maintainers:
+  - Adrian Hunter <adrian.hunter@intel.com>
+
+description:
+  Common properties present on Secure Digital Host Controller Interface (SDHCI)
+  devices.
+
+properties:
+  sdhci-caps:
+    $ref: /schemas/types.yaml#/definitions/uint64
+    description:
+      Additionally present SDHCI capabilities - values for SDHCI_CAPABILITIES
+      and SDHCI_CAPABILITIES_1 registers.
+
+  sdhci-caps-mask:
+    $ref: /schemas/types.yaml#/definitions/uint64
+    description:
+      Masked SDHCI capabilities to remove from SDHCI_CAPABILITIES and
+      SDHCI_CAPABILITIES_1 registers.
+
+allOf:
+  - $ref: mmc-controller.yaml#
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-dove.txt b/Documentation/devicetree/bindings/mmc/sdhci-dove.txt
deleted file mode 100644
index ae9aab9abcd7..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-dove.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-* Marvell sdhci-dove controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
-
-- compatible: Should be "marvell,dove-sdhci".
-
-Example:
-
-sdio0: sdio@92000 {
-	compatible = "marvell,dove-sdhci";
-	reg = <0x92000 0x100>;
-	interrupts = <35>;
-};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
deleted file mode 100644
index 3ee9263adf73..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Fujitsu SDHCI controller
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci_f_sdh30 driver.
-
-Required properties:
-- compatible: "fujitsu,mb86s70-sdhci-3.0"
-- clocks: Must contain an entry for each entry in clock-names. It is a
-  list of phandles and clock-specifier pairs.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Should contain the following two entries:
-	"iface" - clock used for sdhci interface
-	"core"  - core clock for sdhci controller
-
-Optional properties:
-- vqmmc-supply: phandle to the regulator device tree node, mentioned
-  as the VCCQ/VDD_IO supply in the eMMC/SD specs.
-- fujitsu,cmd-dat-delay-select: boolean property indicating that this host
-  requires the CMD_DAT_DELAY control to be enabled.
-
-Example:
-
-	sdhci1: mmc@36600000 {
-		compatible = "fujitsu,mb86s70-sdhci-3.0";
-		reg = <0 0x36600000 0x1000>;
-		interrupts = <0 172 0x4>,
-			     <0 173 0x4>;
-		bus-width = <4>;
-		vqmmc-supply = <&vccq_sdhci1>;
-		clocks = <&clock 2 2 0>, <&clock 2 3 0>;
-		clock-names = "iface", "core";
-	};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
deleted file mode 100644
index 365c3fc122ea..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ /dev/null
@@ -1,120 +0,0 @@
-* Qualcomm SDHCI controller (sdhci-msm)
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-msm driver.
-
-Required properties:
-- compatible: Should contain a SoC-specific string and a IP version string:
-	version strings:
-		"qcom,sdhci-msm-v4" for sdcc versions less than 5.0
-		"qcom,sdhci-msm-v5" for sdcc version 5.0
-		For SDCC version 5.0.0, MCI registers are removed from SDCC
-		interface and some registers are moved to HC. New compatible
-		string is added to support this change - "qcom,sdhci-msm-v5".
-	full compatible strings with SoC and version:
-		"qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8992-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"
-		"qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
-		"qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
-		"qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"
-		"qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
-		"qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"
-	NOTE that some old device tree files may be floating around that only
-	have the string "qcom,sdhci-msm-v4" without the SoC compatible string
-	but doing that should be considered a deprecated practice.
-
-- reg: Base address and length of the register in the following order:
-	- Host controller register map (required)
-	- SD Core register map (required for controllers earlier than msm-v5)
-	- CQE register map (Optional, CQE support is present on SDHC instance meant
-	                    for eMMC and version v4.2 and above)
-	- Inline Crypto Engine register map (optional)
-- reg-names: When CQE register map is supplied, below reg-names are required
-	- "hc" for Host controller register map
-	- "core" for SD core register map
-	- "cqhci" for CQE register map
-	- "ice" for Inline Crypto Engine register map (optional)
-- interrupts: Should contain an interrupt-specifiers for the interrupts:
-	- Host controller interrupt (required)
-- pinctrl-names: Should contain only one value - "default".
-- pinctrl-0: Should specify pin control groups used for this controller.
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
-- clock-names: Should contain the following:
-	"iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required)
-	"core"	- SDC MMC clock (MCLK) (required)
-	"bus"	- SDCC bus voter clock (optional)
-	"xo"	- TCXO clock (optional)
-	"cal"	- reference clock for RCLK delay calibration (optional)
-	"sleep"	- sleep clock for RCLK delay calibration (optional)
-	"ice" - clock for Inline Crypto Engine (optional)
-
-- qcom,ddr-config: Certain chipsets and platforms require particular settings
-	for the DDR_CONFIG register. Use this field to specify the register
-	value as per the Hardware Programming Guide.
-
-- qcom,dll-config: Chipset and Platform specific value. Use this field to
-	specify the DLL_CONFIG register value as per Hardware Programming Guide.
-
-Optional Properties:
-* Following bus parameters are required for interconnect bandwidth scaling:
-- interconnects: Pairs of phandles and interconnect provider specifier
-		 to denote the edge source and destination ports of
-		 the interconnect path.
-
-- interconnect-names: For sdhc, we have two main paths.
-		1. Data path : sdhc to ddr
-		2. Config path : cpu to sdhc
-		For Data interconnect path the name supposed to be
-		is "sdhc-ddr" and for config interconnect path it is
-		"cpu-sdhc".
-		Please refer to Documentation/devicetree/bindings/
-		interconnect/ for more details.
-
-Example:
-
-	sdhc_1: sdhci@f9824900 {
-		compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-		reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-		interrupts = <0 123 0>;
-		bus-width = <8>;
-		non-removable;
-
-		vmmc-supply = <&pm8941_l20>;
-		vqmmc-supply = <&pm8941_s3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
-
-		clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
-		clock-names = "core", "iface";
-		interconnects = <&qnoc MASTER_SDCC_ID &qnoc SLAVE_DDR_ID>,
-				<&qnoc MASTER_CPU_ID &qnoc SLAVE_SDCC_ID>;
-		interconnect-names = "sdhc-ddr","cpu-sdhc";
-
-		qcom,dll-config = <0x000f642c>;
-		qcom,ddr-config = <0x80040868>;
-	};
-
-	sdhc_2: sdhci@f98a4900 {
-		compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-		reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-		interrupts = <0 125 0>;
-		bus-width = <4>;
-		cd-gpios = <&msmgpio 62 0x1>;
-
-		vmmc-supply = <&pm8941_l21>;
-		vqmmc-supply = <&pm8941_l13>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
-
-		clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
-		clock-names = "core", "iface";
-
-		qcom,dll-config = <0x0007642c>;
-		qcom,ddr-config = <0x80040868>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
new file mode 100644
index 000000000000..4f2d9e8127dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -0,0 +1,259 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sdhci-msm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDHCI controller (sdhci-msm)
+
+maintainers:
+  - Bhupesh Sharma <bhupesh.sharma@linaro.org>
+
+description:
+  Secure Digital Host Controller Interface (SDHCI) present on
+  Qualcomm SOCs supports SD/MMC/SDIO devices.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,sdhci-msm-v4
+        deprecated: true
+      - items:
+          - enum:
+              - qcom,apq8084-sdhci
+              - qcom,msm8226-sdhci
+              - qcom,msm8953-sdhci
+              - qcom,msm8974-sdhci
+              - qcom,msm8976-sdhci
+              - qcom,msm8916-sdhci
+              - qcom,msm8992-sdhci
+              - qcom,msm8994-sdhci
+              - qcom,msm8996-sdhci
+              - qcom,msm8998-sdhci
+          - const: qcom,sdhci-msm-v4 # for sdcc versions less than 5.0
+      - items:
+          - enum:
+              - qcom,ipq5018-sdhci
+              - qcom,ipq5332-sdhci
+              - qcom,ipq9574-sdhci
+              - qcom,qcm2290-sdhci
+              - qcom,qcs404-sdhci
+              - qcom,sc7180-sdhci
+              - qcom,sc7280-sdhci
+              - qcom,sdm630-sdhci
+              - qcom,sdm670-sdhci
+              - qcom,sdm845-sdhci
+              - qcom,sdx55-sdhci
+              - qcom,sdx65-sdhci
+              - qcom,sm6115-sdhci
+              - qcom,sm6125-sdhci
+              - qcom,sm6350-sdhci
+              - qcom,sm6375-sdhci
+              - qcom,sm8150-sdhci
+              - qcom,sm8250-sdhci
+              - qcom,sm8350-sdhci
+              - qcom,sm8450-sdhci
+              - qcom,sm8550-sdhci
+          - const: qcom,sdhci-msm-v5 # for sdcc version 5.0
+
+  reg:
+    minItems: 1
+    maxItems: 4
+
+  reg-names:
+    minItems: 1
+    maxItems: 4
+
+  clocks:
+    minItems: 3
+    items:
+      - description: Main peripheral bus clock, PCLK/HCLK - AHB Bus clock
+      - description: SDC MMC clock, MCLK
+      - description: TCXO clock
+      - description: clock for Inline Crypto Engine
+      - description: SDCC bus voter clock
+      - description: reference clock for RCLK delay calibration
+      - description: sleep clock for RCLK delay calibration
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: iface
+      - const: core
+      - const: xo
+      - const: ice
+      - const: bus
+      - const: cal
+      - const: sleep
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: hc_irq
+      - const: pwr_irq
+
+  pinctrl-names:
+    minItems: 1
+    items:
+      - const: default
+      - const: sleep
+
+  pinctrl-0:
+    description:
+      Should specify pin control groups used for this controller.
+
+  pinctrl-1:
+    description:
+      Should specify sleep pin control groups used for this controller.
+
+  resets:
+    maxItems: 1
+
+  qcom,ddr-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: platform specific settings for DDR_CONFIG reg.
+
+  qcom,dll-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: platform specific settings for DLL_CONFIG reg.
+
+  iommus:
+    minItems: 1
+    maxItems: 8
+    description: |
+      phandle to apps_smmu node with sid mask.
+
+  interconnects:
+    minItems: 1
+    items:
+      - description: data path, sdhc to ddr
+      - description: config path, cpu to sdhc
+
+  interconnect-names:
+    minItems: 1
+    items:
+      - const: sdhc-ddr
+      - const: cpu-sdhc
+
+  power-domains:
+    description: A phandle to sdhci power domain node
+    maxItems: 1
+
+  operating-points-v2: true
+
+patternProperties:
+  '^opp-table(-[a-z0-9]+)?$':
+    if:
+      properties:
+        compatible:
+          const: operating-points-v2
+    then:
+      patternProperties:
+        '^opp-?[0-9]+$':
+          required:
+            - required-opps
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+allOf:
+  - $ref: sdhci-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdhci-msm-v4
+    then:
+      properties:
+        reg:
+          minItems: 2
+          items:
+            - description: Host controller register map
+            - description: SD Core register map
+            - description: CQE register map
+            - description: Inline Crypto Engine register map
+        reg-names:
+          minItems: 2
+          items:
+            - const: hc
+            - const: core
+            - const: cqhci
+            - const: ice
+    else:
+      properties:
+        reg:
+          minItems: 1
+          items:
+            - description: Host controller register map
+            - description: CQE register map
+            - description: Inline Crypto Engine register map
+        reg-names:
+          minItems: 1
+          items:
+            - const: hc
+            - const: cqhci
+            - const: ice
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    sdhc_2: mmc@8804000 {
+      compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
+      reg = <0 0x08804000 0 0x1000>;
+
+      interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "hc_irq", "pwr_irq";
+
+      clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+               <&gcc GCC_SDCC2_APPS_CLK>,
+               <&rpmhcc RPMH_CXO_CLK>;
+      clock-names = "iface", "core", "xo";
+      iommus = <&apps_smmu 0x4a0 0x0>;
+      qcom,dll-config = <0x0007642c>;
+      qcom,ddr-config = <0x80040868>;
+      power-domains = <&rpmhpd SM8250_CX>;
+
+      operating-points-v2 = <&sdhc2_opp_table>;
+
+      sdhc2_opp_table: opp-table {
+        compatible = "operating-points-v2";
+
+        opp-19200000 {
+          opp-hz = /bits/ 64 <19200000>;
+          required-opps = <&rpmhpd_opp_min_svs>;
+        };
+
+        opp-50000000 {
+          opp-hz = /bits/ 64 <50000000>;
+          required-opps = <&rpmhpd_opp_low_svs>;
+        };
+
+        opp-100000000 {
+          opp-hz = /bits/ 64 <100000000>;
+          required-opps = <&rpmhpd_opp_svs>;
+        };
+
+        opp-202000000 {
+          opp-hz = /bits/ 64 <202000000>;
+          required-opps = <&rpmhpd_opp_svs_l1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
index aeb615ef672a..f91e341e6b36 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt
@@ -5,7 +5,11 @@ Refer to mmc.txt for standard MMC bindings.
 For UHS devices which require tuning, the device tree should have a "cpu_thermal" node which maps to the appropriate thermal zone. This is used to get the temperature of the zone during tuning.
 
 Required properties:
-- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
+- compatible: Should be "ti,omap2430-sdhci" for omap2430 controllers
+	      Should be "ti,omap3-sdhci" for omap3 controllers
+	      Should be "ti,omap4-sdhci" for omap4 and ti81 controllers
+	      Should be "ti,omap5-sdhci" for omap5 controllers
+	      Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers
 	      Should be "ti,k2g-sdhci" for K2G
 	      Should be "ti,am335-sdhci" for am335x controllers
 	      Should be "ti,am437-sdhci" for am437x controllers
@@ -24,6 +28,9 @@ Optional properties:
 		DMA specifiers listed in dmas. The string naming is to be "tx"
 		and "rx" for TX and RX DMA requests, respectively.
 
+Deprecated properties:
+- ti,non-removable: Compatible with the generic non-removable property
+
 Example:
 	mmc1: mmc@4809c000 {
 		compatible = "ti,dra7-sdhci";
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
index 1c87f4218e18..09455f9fa8de 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/sdhci-pxa.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Marvell PXA SDHCI v2/v3 bindings
+title: Marvell PXA SDHCI v1/v2/v3
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
@@ -34,6 +34,7 @@ allOf:
 properties:
   compatible:
     enum:
+      - mrvl,pxav1-mmc
       - mrvl,pxav2-mmc
       - mrvl,pxav3-mmc
       - marvell,armada-380-sdhci
@@ -61,6 +62,22 @@ properties:
       - const: io
       - const: core
 
+  pinctrl-names:
+    description:
+      Optional for supporting PXA168 SDIO IRQ errata to switch CMD pin between
+      SDIO CMD and GPIO mode.
+    items:
+      - const: default
+      - const: state_cmd_gpio
+
+  pinctrl-0:
+    description:
+      Should contain default pinctrl.
+
+  pinctrl-1:
+    description:
+      Should switch CMD pin to GPIO mode as a high output.
+
   mrvl,clk-delay-cycles:
     description: Specify a number of cycles to delay for tuning.
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
index f300ced4cdf3..a43eb837f8da 100644
--- a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/snps,dwcmshc-sdhci.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Synopsys Designware Mobile Storage Host Controller Binding
+title: Synopsys Designware Mobile Storage Host Controller
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
@@ -17,6 +17,7 @@ properties:
   compatible:
     enum:
       - rockchip,rk3568-dwcmshc
+      - rockchip,rk3588-dwcmshc
       - snps,dwcmshc-sdhci
 
   reg:
@@ -44,6 +45,17 @@ properties:
       - const: block
       - const: timer
 
+  resets:
+    maxItems: 5
+
+  reset-names:
+    items:
+      - const: core
+      - const: bus
+      - const: axi
+      - const: block
+      - const: timer
+
   rockchip,txclk-tapnum:
     description: Specify the number of delay for tx sampling.
     $ref: /schemas/types.yaml#/definitions/uint8
diff --git a/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
deleted file mode 100644
index 4897bea7e3f8..000000000000
--- a/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-* Altera SOCFPGA specific extensions to the Synopsys Designware Mobile
-  Storage Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core Synopsys dw mshc controller properties described
-by synopsys-dw-mshc.txt and the properties used by the Altera SOCFPGA specific
-extensions to the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- "altr,socfpga-dw-mshc": for Altera's SOCFPGA platform
-
-Example:
-
-	mmc: dwmmc0@ff704000 {
-		compatible = "altr,socfpga-dw-mshc";
-		reg = <0xff704000 0x1000>;
-		interrupts = <0 129 4>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
diff --git a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
index 56f9ff12742d..c71424aeaccd 100644
--- a/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
+++ b/Documentation/devicetree/bindings/mmc/socionext,uniphier-sd.yaml
@@ -26,6 +26,12 @@ properties:
   clocks:
     maxItems: 1
 
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: rx-tx
+
   reset-names:
     description: |
       There are three reset signals at maximum
@@ -49,6 +55,16 @@ properties:
     minItems: 1
     maxItems: 3
 
+  socionext,syscon-uhs-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscon that configures UHS mode
+          - description: ID of SD instance
+    description:
+      A phandle to syscon with one argument that configures UHS mode.
+      The argument is the ID of SD instance.
+
 allOf:
   - $ref: mmc-controller.yaml
 
diff --git a/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml b/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
new file mode 100644
index 000000000000..51e1b04e799f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/starfive,jh7110-mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive Designware Mobile Storage Host Controller
+
+description:
+  StarFive uses the Synopsys designware mobile storage host controller
+  to interface a SoC with storage medium such as eMMC or SD/MMC cards.
+
+allOf:
+  - $ref: synopsys-dw-mshc-common.yaml#
+
+maintainers:
+  - William Qiu <william.qiu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-mmc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: biu clock
+      - description: ciu clock
+
+  clock-names:
+    items:
+      - const: biu
+      - const: ciu
+
+  interrupts:
+    maxItems: 1
+
+  starfive,sysreg:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to System Register Controller syscon node
+          - description: offset of SYS_SYSCONSAIF__SYSCFG register for MMC controller
+          - description: shift of SYS_SYSCONSAIF__SYSCFG register for MMC controller
+          - description: mask of SYS_SYSCONSAIF__SYSCFG register for MMC controller
+    description:
+      Should be four parameters, the phandle to System Register Controller
+      syscon node and the offset/shift/mask of SYS_SYSCONSAIF__SYSCFG register
+      for MMC controller.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - starfive,sysreg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc@16010000 {
+        compatible = "starfive,jh7110-mmc";
+        reg = <0x16010000 0x10000>;
+        clocks = <&syscrg 91>,
+                 <&syscrg 93>;
+        clock-names = "biu","ciu";
+        resets = <&syscrg 64>;
+        reset-names = "reset";
+        interrupts = <74>;
+        fifo-depth = <32>;
+        fifo-watermark-aligned;
+        data-addr = <0>;
+        starfive,sysreg = <&sys_syscon 0x14 0x1a 0x7c000000>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml b/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml
new file mode 100644
index 000000000000..611687166735
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sunplus,mmc.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Ltd. Co. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/sunplus,mmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus MMC Controller
+
+maintainers:
+  - Tony Huang <tonyhuang.sunplus@gmail.com>
+  - Li-hao Kuo <lhjeff911@gmail.com>
+
+allOf:
+  - $ref: mmc-controller.yaml
+
+properties:
+  compatible:
+    enum:
+      - sunplus,sp7021-mmc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mmc0: mmc@9c003b00 {
+        compatible = "sunplus,sp7021-mmc";
+        reg = <0x9c003b00 0x180>;
+        interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 0x4e>;
+        resets = <&rstc 0x3e>;
+        bus-width = <8>;
+        max-frequency = <52000000>;
+        non-removable;
+        disable-wp;
+        cap-mmc-highspeed;
+        mmc-ddr-3_3v;
+        no-sdio;
+        no-sd;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
index 8dfad89c78a7..6f11b2adf103 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Synopsys Designware Mobile Storage Host Controller Common Properties
 
 allOf:
-  - $ref: "mmc-controller.yaml#"
+  - $ref: mmc-controller.yaml#
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
index 240abb6f102c..b13b5166d20a 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
@@ -4,10 +4,7 @@
 $id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Synopsys Designware Mobile Storage Host Controller Binding
-
-allOf:
-  - $ref: "synopsys-dw-mshc-common.yaml#"
+title: Synopsys Designware Mobile Storage Host Controller
 
 maintainers:
   - Ulf Hansson <ulf.hansson@linaro.org>
@@ -15,7 +12,10 @@ maintainers:
 # Everything else is described in the common file
 properties:
   compatible:
-    const: snps,dw-mshc
+    enum:
+      - altr,socfpga-dw-mshc
+      - img,pistachio-dw-mshc
+      - snps,dw-mshc
 
   reg:
     maxItems: 1
@@ -35,6 +35,35 @@ properties:
       - const: biu
       - const: ciu
 
+  altr,sysmgr-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the sysmgr node
+          - description: register offset that controls the SDMMC clock phase
+          - description: register shift for the smplsel(drive in) setting
+    description:
+      This property is optional. Contains the phandle to System Manager block
+      that contains the SDMMC clock-phase control register. The first value is
+      the pointer to the sysmgr, the 2nd value is the register offset for the
+      SDMMC clock phase register, and the 3rd value is the bit shift for the
+      smplsel(drive in) setting.
+
+allOf:
+  - $ref: synopsys-dw-mshc-common.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: altr,socfpga-dw-mshc
+    then:
+      properties:
+        altr,sysmgr-syscon: true
+    else:
+      properties:
+        altr,sysmgr-syscon: false
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
index c033ac3f147d..9a88870cd865 100644
--- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml
@@ -4,19 +4,16 @@
 $id: http://devicetree.org/schemas/mtd/allwinner,sun4i-a10-nand.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 NAND Controller Device Tree Bindings
+title: Allwinner A10 NAND Controller
 
 allOf:
-  - $ref: "nand-controller.yaml"
+  - $ref: nand-controller.yaml
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
 properties:
-  "#address-cells": true
-  "#size-cells": true
-
   compatible:
     enum:
       - allwinner,sun4i-a10-nand
@@ -49,12 +46,8 @@ properties:
   dma-names:
     const: rxtx
 
-  pinctrl-names: true
-
 patternProperties:
-  "^pinctrl-[0-9]+$": true
-
-  "^nand@[a-f0-9]+$":
+  "^nand@[a-f0-9]$":
     type: object
     properties:
       reg:
@@ -91,6 +84,29 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun6i-rtc.h>
+    #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
+    #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
+
+    nand-controller@1c03000 {
+        compatible = "allwinner,sun8i-a23-nand-controller";
+        reg = <0x01c03000 0x1000>;
+        interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
+        clock-names = "ahb", "mod";
+        resets = <&ccu RST_BUS_NAND>;
+        reset-names = "ahb";
+        dmas = <&dma 5>;
+        dma-names = "rxtx";
+        pinctrl-names = "default";
+        pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
 
 ...
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
deleted file mode 100644
index 5794ab1147c1..000000000000
--- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
-
-This file documents the properties in addition to those available in
-the MTD NAND bindings.
-
-Required properties:
-- compatible : contains one of:
-  - "amlogic,meson-gxl-nfc"
-  - "amlogic,meson-axg-nfc"
-- clocks     :
-	A list of phandle + clock-specifier pairs for the clocks listed
-	in clock-names.
-
-- clock-names: Should contain the following:
-	"core" - NFC module gate clock
-	"device" - device clock from eMMC sub clock controller
-	"rx" - rx clock phase
-	"tx" - tx clock phase
-
-- amlogic,mmc-syscon	: Required for NAND clocks, it's shared with SD/eMMC
-				controller port C
-
-Optional children nodes:
-Children nodes represent the available nand chips.
-
-Other properties:
-see Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings.
-
-Example demonstrate on AXG SoC:
-
-	sd_emmc_c_clkc: mmc@7000 {
-		compatible = "amlogic,meson-axg-mmc-clkc", "syscon";
-		reg = <0x0 0x7000 0x0 0x800>;
-	};
-
-	nand-controller@7800 {
-		compatible = "amlogic,meson-axg-nfc";
-		reg = <0x0 0x7800 0x0 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
-
-		clocks = <&clkc CLKID_SD_EMMC_C>,
-			<&sd_emmc_c_clkc CLKID_MMC_DIV>,
-			<&sd_emmc_c_clkc CLKID_MMC_PHASE_RX>,
-			<&sd_emmc_c_clkc CLKID_MMC_PHASE_TX>;
-		clock-names = "core", "device", "rx", "tx";
-		amlogic,mmc-syscon = <&sd_emmc_c_clkc>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_pins>;
-
-		nand@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nand-on-flash-bbt;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
new file mode 100644
index 000000000000..28fb9a7dd70f
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/amlogic,meson-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic NAND Flash Controller (NFC) for GXBB/GXL/AXG family SoCs
+
+allOf:
+  - $ref: nand-controller.yaml
+
+maintainers:
+  - liang.yang@amlogic.com
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-gxl-nfc
+      - amlogic,meson-axg-nfc
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: nfc
+      - const: emmc
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+
+  clock-names:
+    items:
+      - const: core
+      - const: device
+
+patternProperties:
+  "^nand@[0-7]$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+
+      nand-ecc-mode:
+        const: hw
+
+      nand-ecc-step-size:
+        const: 1024
+
+      nand-ecc-strength:
+        enum: [8, 16, 24, 30, 40, 50, 60]
+        description: |
+          The ECC configurations that can be supported are as follows.
+            meson-gxl-nfc 8, 16, 24, 30, 40, 50, 60
+            meson-axg-nfc 8
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/axg-clkc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    nand-controller@ffe07800 {
+      compatible = "amlogic,meson-axg-nfc";
+      reg = <0xffe07800 0x100>, <0xffe07000 0x800>;
+      reg-names = "nfc", "emmc";
+      interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&clkc CLKID_SD_EMMC_C>,  <&clkc CLKID_FCLK_DIV2>;
+      clock-names = "core", "device";
+
+      pinctrl-0 = <&nand_pins>;
+      pinctrl-names = "default";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
index b32876933269..15b63bbb82a2 100644
--- a/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/arasan,nand-controller.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/mtd/arasan,nand-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Arasan NAND Flash Controller with ONFI 3.1 support device tree bindings
+title: Arasan NAND Flash Controller with ONFI 3.1 support
 
 allOf:
-  - $ref: "nand-controller.yaml"
+  - $ref: nand-controller.yaml
 
 maintainers:
-  - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
+  - Michal Simek <michal.simek@amd.com>
 
 properties:
   compatible:
@@ -35,9 +35,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  "#address-cells": true
-  "#size-cells": true
-
 required:
   - compatible
   - reg
@@ -45,7 +42,7 @@ required:
   - clock-names
   - interrupts
 
-additionalProperties: true
+unevaluatedProperties: true
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
index 5f126bb9b202..7bd7c55a9c15 100644
--- a/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
+++ b/Documentation/devicetree/bindings/mtd/arm,pl353-nand-r2p1.yaml
@@ -4,14 +4,13 @@
 $id: http://devicetree.org/schemas/mtd/arm,pl353-nand-r2p1.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: PL353 NAND Controller device tree bindings
+title: PL353 NAND Controller
 
 allOf:
-  - $ref: "nand-controller.yaml"
+  - $ref: nand-controller.yaml
 
 maintainers:
   - Miquel Raynal <miquel.raynal@bootlin.com>
-  - Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
 
 properties:
   compatible:
@@ -34,20 +33,20 @@ unevaluatedProperties: false
 examples:
   - |
     smcc: memory-controller@e000e000 {
-      compatible = "arm,pl353-smc-r2p1", "arm,primecell";
-      reg = <0xe000e000 0x0001000>;
-      clock-names = "memclk", "apb_pclk";
-      clocks = <&clkc 11>, <&clkc 44>;
-      ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
-                0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
-                0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
-      #address-cells = <2>;
-      #size-cells = <1>;
-
-      nfc0: nand-controller@0,0 {
-        compatible = "arm,pl353-nand-r2p1";
-        reg = <0 0 0x1000000>;
-        #address-cells = <1>;
-        #size-cells = <0>;
-      };
+        compatible = "arm,pl353-smc-r2p1", "arm,primecell";
+        reg = <0xe000e000 0x0001000>;
+        clock-names = "memclk", "apb_pclk";
+        clocks = <&clkc 11>, <&clkc 44>;
+        ranges = <0x0 0x0 0xe1000000 0x1000000 /* Nand CS region */
+                  0x1 0x0 0xe2000000 0x2000000 /* SRAM/NOR CS0 region */
+                  0x2 0x0 0xe4000000 0x2000000>; /* SRAM/NOR CS1 region */
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        nfc0: nand-controller@0,0 {
+            compatible = "arm,pl353-nand-r2p1";
+            reg = <0 0 0x1000000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/mtd/aspeed-smc.txt b/Documentation/devicetree/bindings/mtd/aspeed-smc.txt
deleted file mode 100644
index 49f6528ef547..000000000000
--- a/Documentation/devicetree/bindings/mtd/aspeed-smc.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* Aspeed Firmware Memory controller
-* Aspeed SPI Flash Memory Controller
-
-The Firmware Memory Controller in the Aspeed AST2500 SoC supports
-three chip selects, two of which are always of SPI type and the third
-can be SPI or NOR type flash. These bindings only describe SPI.
-
-The two SPI flash memory controllers in the AST2500 each support two
-chip selects.
-
-Required properties:
-  - compatible : Should be one of
-	"aspeed,ast2400-fmc" for the AST2400 Firmware Memory Controller
-	"aspeed,ast2400-spi" for the AST2400 SPI Flash memory Controller
-	"aspeed,ast2500-fmc" for the AST2500 Firmware Memory Controller
-	"aspeed,ast2500-spi" for the AST2500 SPI flash memory controllers
-
-  - reg : the first contains the control register location and length,
-          the second contains the memory window mapping address and length
-  - #address-cells : must be 1 corresponding to chip select child binding
-  - #size-cells : must be 0 corresponding to chip select child binding
-
-Optional properties:
-  - interrupts : Should contain the interrupt for the dma device if an
-    FMC
-
-The child nodes are the SPI flash modules which must have a compatible
-property as specified in bindings/mtd/jedec,spi-nor.txt
-
-Optionally, the child node can contain properties for SPI mode (may be
-ignored):
-  - spi-max-frequency - max frequency of spi bus
-
-
-Example:
-fmc: fmc@1e620000 {
-	compatible = "aspeed,ast2500-fmc";
-	reg = < 0x1e620000 0x94
-		0x20000000 0x02000000 >;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	interrupts = <19>;
-	flash@0 {
-		reg = < 0 >;
-		compatible = "jedec,spi-nor";
-		/* spi-max-frequency = <>; */
-		/* m25p,fast-read; */
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index 3aa297c97ab6..50645828ac20 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
@@ -45,10 +45,8 @@ Optional properties:
 - atmel,rb: an integer identifying the native Ready/Busy pin. Only meaningful
 	    on sama5 SoCs.
 
-All generic properties described in
-Documentation/devicetree/bindings/mtd/{common,nand}.txt also apply to the NAND
-device node, and NAND partitions should be defined under the NAND node as
-described in Documentation/devicetree/bindings/mtd/partition.txt.
+All generic properties are described in the generic yaml files under
+Documentation/devicetree/bindings/mtd/.
 
 * ECC engine (PMECC) bindings:
 
diff --git a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
index dd5a64969e37..1571024aa119 100644
--- a/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
+++ b/Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml
@@ -86,15 +86,15 @@ properties:
     minItems: 1
     items:
       - description: NAND CTLRDY interrupt
-      - description: FLASH_DMA_DONE if flash DMA is available
-      - description: FLASH_EDU_DONE if EDU is available
+      - description: FLASH_DMA_DONE (if flash DMA is available) or FLASH_EDU_DONE (if EDU is available)
 
   interrupt-names:
     minItems: 1
     items:
       - const: nand_ctlrdy
-      - const: flash_dma_done
-      - const: flash_edu_done
+      - enum:
+          - flash_dma_done
+          - flash_edu_done
 
   clocks:
     maxItems: 1
@@ -173,6 +173,13 @@ allOf:
             - const: nand
             - const: iproc-idm
             - const: iproc-ext
+  - if:
+      properties:
+        interrupts:
+          minItems: 2
+    then:
+      required:
+        - interrupt-names
 
 unevaluatedProperties: false
 
@@ -184,51 +191,52 @@ required:
 examples:
   - |
     nand-controller@f0442800 {
-            compatible = "brcm,brcmnand-v7.0", "brcm,brcmnand";
-            reg = <0xf0442800 0x600>,
-                  <0xf0443000 0x100>;
-            reg-names = "nand", "flash-dma";
-            interrupt-parent = <&hif_intr2_intc>;
-            interrupts = <24>, <4>;
+        compatible = "brcm,brcmnand-v7.0", "brcm,brcmnand";
+        reg = <0xf0442800 0x600>,
+              <0xf0443000 0x100>;
+        reg-names = "nand", "flash-dma";
+        interrupt-parent = <&hif_intr2_intc>;
+        interrupts = <24>, <4>;
+        interrupt-names = "nand_ctlrdy", "flash_dma_done";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@1 {
+            compatible = "brcm,nandcs";
+            reg = <1>; // Chip select 1
+            nand-on-flash-bbt;
+            nand-ecc-strength = <12>;
+            nand-ecc-step-size = <512>;
 
             #address-cells = <1>;
-            #size-cells = <0>;
-
-            nand@1 {
-                    compatible = "brcm,nandcs";
-                    reg = <1>; // Chip select 1
-                    nand-on-flash-bbt;
-                    nand-ecc-strength = <12>;
-                    nand-ecc-step-size = <512>;
-
-                    #address-cells = <1>;
-                    #size-cells = <1>;
-            };
+            #size-cells = <1>;
+        };
     };
   - |
     nand-controller@10000200 {
-            compatible = "brcm,nand-bcm63168", "brcm,nand-bcm6368",
-                         "brcm,brcmnand-v4.0", "brcm,brcmnand";
-            reg = <0x10000200 0x180>,
-                  <0x100000b0 0x10>,
-                  <0x10000600 0x200>;
-            reg-names = "nand", "nand-int-base", "nand-cache";
-            interrupt-parent = <&periph_intc>;
-            interrupts = <50>;
-            clocks = <&periph_clk 20>;
-            clock-names = "nand";
+        compatible = "brcm,nand-bcm63168", "brcm,nand-bcm6368",
+                     "brcm,brcmnand-v4.0", "brcm,brcmnand";
+        reg = <0x10000200 0x180>,
+              <0x100000b0 0x10>,
+              <0x10000600 0x200>;
+        reg-names = "nand", "nand-int-base", "nand-cache";
+        interrupt-parent = <&periph_intc>;
+        interrupts = <50>;
+        clocks = <&periph_clk 20>;
+        clock-names = "nand";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+            compatible = "brcm,nandcs";
+            reg = <0>;
+            nand-on-flash-bbt;
+            nand-ecc-strength = <1>;
+            nand-ecc-step-size = <512>;
 
             #address-cells = <1>;
-            #size-cells = <0>;
-
-            nand@0 {
-                    compatible = "brcm,nandcs";
-                    reg = <0>;
-                    nand-on-flash-bbt;
-                    nand-ecc-strength = <1>;
-                    nand-ecc-step-size = <512>;
-
-                    #address-cells = <1>;
-                    #size-cells = <1>;
-            };
+            #size-cells = <1>;
+        };
     };
diff --git a/Documentation/devicetree/bindings/mtd/common.txt b/Documentation/devicetree/bindings/mtd/common.txt
deleted file mode 100644
index ae16f9ea8606..000000000000
--- a/Documentation/devicetree/bindings/mtd/common.txt
+++ /dev/null
@@ -1 +0,0 @@
-This file has been moved to mtd.yaml.
diff --git a/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt b/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt
deleted file mode 100644
index efa5b2aba829..000000000000
--- a/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Flash device on Cortina Systems Gemini SoC
-
-This flash is regular CFI compatible (Intel or AMD extended) flash chips with
-some special bits that can be controlled by the machine's system controller.
-
-Required properties:
-- compatible : must be "cortina,gemini-flash", "cfi-flash";
-- reg : memory address for the flash chip
-- syscon : must be a phandle to the system controller
-- bank-width : width in bytes of flash interface, should be <2>
-
-For the rest of the properties, see mtd-physmap.yaml.
-
-The device tree may optionally contain sub-nodes describing partitions of the
-address space. See partition.txt for more detail.
-
-Example:
-
-flash@30000000 {
-	compatible = "cortina,gemini-flash", "cfi-flash";
-	reg = <0x30000000 0x01000000>;
-	syscon = <&syscon>;
-	bank-width = <2>;
-};
diff --git a/Documentation/devicetree/bindings/mtd/denali,nand.yaml b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
index 1307ed7e7fc6..0be83ad42970 100644
--- a/Documentation/devicetree/bindings/mtd/denali,nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/denali,nand.yaml
@@ -145,6 +145,6 @@ examples:
         #size-cells = <0>;
 
         nand@0 {
-                reg = <0>;
+            reg = <0>;
         };
     };
diff --git a/Documentation/devicetree/bindings/mtd/elm.txt b/Documentation/devicetree/bindings/mtd/elm.txt
deleted file mode 100644
index 59ddc61c1076..000000000000
--- a/Documentation/devicetree/bindings/mtd/elm.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Error location module
-
-Required properties:
-- compatible: Must be "ti,am3352-elm"
-- reg: physical base address and size of the registers map.
-- interrupts: Interrupt number for the elm.
-
-Optional properties:
-- ti,hwmods: Name of the hwmod associated to the elm
-
-Example:
-elm: elm@0 {
-	compatible = "ti,am3352-elm";
-	reg = <0x48080000 0x2000>;
-	interrupts = <4>;
-};
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
deleted file mode 100644
index c459f169a904..000000000000
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ /dev/null
@@ -1,147 +0,0 @@
-Device tree bindings for GPMC connected NANDs
-
-GPMC connected NAND (found on OMAP boards) are represented as child nodes of
-the GPMC controller with a name of "nand".
-
-All timing relevant properties as well as generic gpmc child properties are
-explained in a separate documents - please refer to
-Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
-
-For NAND specific properties such as ECC modes or bus width, please refer to
-Documentation/devicetree/bindings/mtd/nand-controller.yaml
-
-
-Required properties:
-
- - compatible:	"ti,omap2-nand"
- - reg:		range id (CS number), base offset and length of the
-		NAND I/O space
- - interrupts:	Two interrupt specifiers, one for fifoevent, one for termcount.
-
-Optional properties:
-
- - nand-bus-width: 		Set this numeric value to 16 if the hardware
-				is wired that way. If not specified, a bus
-				width of 8 is assumed.
-
- - ti,nand-ecc-opt:		A string setting the ECC layout to use. One of:
-		"sw"		1-bit Hamming ecc code via software
-		"hw"		<deprecated> use "ham1" instead
-		"hw-romcode"	<deprecated> use "ham1" instead
-		"ham1"		1-bit Hamming ecc code
-		"bch4"		4-bit BCH ecc code
-		"bch8"		8-bit BCH ecc code
-		"bch16"		16-bit BCH ECC code
-		Refer below "How to select correct ECC scheme for your device ?"
-
- - ti,nand-xfer-type:		A string setting the data transfer type. One of:
-
-		"prefetch-polled"	Prefetch polled mode (default)
-		"polled"		Polled mode, without prefetch
-		"prefetch-dma"		Prefetch enabled DMA mode
-		"prefetch-irq"		Prefetch enabled irq mode
-
- - elm_id:	<deprecated> use "ti,elm-id" instead
- - ti,elm-id:	Specifies phandle of the ELM devicetree node.
-		ELM is an on-chip hardware engine on TI SoC which is used for
-		locating ECC errors for BCHx algorithms. SoC devices which have
-		ELM hardware engines should specify this device node in .dtsi
-		Using ELM for ECC error correction frees some CPU cycles.
- - rb-gpios:	GPIO specifier for the ready/busy# pin.
-
-For inline partition table parsing (optional):
-
- - #address-cells: should be set to 1
- - #size-cells: should be set to 1
-
-Example for an AM33xx board:
-
-	gpmc: gpmc@50000000 {
-		compatible = "ti,am3352-gpmc";
-		ti,hwmods = "gpmc";
-		reg = <0x50000000 0x36c>;
-		interrupts = <100>;
-		gpmc,num-cs = <8>;
-		gpmc,num-waitpins = <2>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x1000000>;	/* CS0 space, 16MB */
-		elm_id = <&elm>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		nand@0,0 {
-			compatible = "ti,omap2-nand";
-			reg = <0 0 4>;		/* CS0, offset 0, NAND I/O window 4 */
-			interrupt-parent = <&gpmc>;
-			interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE NONE>;
-			nand-bus-width = <16>;
-			ti,nand-ecc-opt = "bch8";
-			ti,nand-xfer-type = "polled";
-			rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-
-			gpmc,sync-clk-ps = <0>;
-			gpmc,cs-on-ns = <0>;
-			gpmc,cs-rd-off-ns = <44>;
-			gpmc,cs-wr-off-ns = <44>;
-			gpmc,adv-on-ns = <6>;
-			gpmc,adv-rd-off-ns = <34>;
-			gpmc,adv-wr-off-ns = <44>;
-			gpmc,we-off-ns = <40>;
-			gpmc,oe-off-ns = <54>;
-			gpmc,access-ns = <64>;
-			gpmc,rd-cycle-ns = <82>;
-			gpmc,wr-cycle-ns = <82>;
-			gpmc,wr-access-ns = <40>;
-			gpmc,wr-data-mux-bus-ns = <0>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/* partitions go here */
-		};
-	};
-
-How to select correct ECC scheme for your device ?
---------------------------------------------------
-Higher ECC scheme usually means better protection against bit-flips and
-increased system lifetime. However, selection of ECC scheme is dependent
-on various other factors also like;
-
-(1) support of built in hardware engines.
-	Some legacy OMAP SoC do not have ELM harware engine, so those SoC cannot
-	support ecc-schemes with hardware error-correction (BCHx_HW). However
-	such SoC can use ecc-schemes with software library for error-correction
-	(BCHx_HW_DETECTION_SW). The error correction capability with software
-	library remains equivalent to their hardware counter-part, but there is
-	slight CPU penalty when too many bit-flips are detected during reads.
-
-(2) Device parameters like OOBSIZE.
-	Other factor which governs the selection of ecc-scheme is oob-size.
-	Higher ECC schemes require more OOB/Spare area to store ECC syndrome,
-	so the device should have enough free bytes available its OOB/Spare
-	area to accommodate ECC for entire page. In general following expression
-	helps in determining if given device can accommodate ECC syndrome:
-	"2 + (PAGESIZE / 512) * ECC_BYTES" <= OOBSIZE"
-	where
-		OOBSIZE		number of bytes in OOB/spare area
-		PAGESIZE	number of bytes in main-area of device page
-		ECC_BYTES	number of ECC bytes generated to protect
-		                512 bytes of data, which is:
-				'3' for HAM1_xx ecc schemes
-				'7' for BCH4_xx ecc schemes
-				'14' for BCH8_xx ecc schemes
-				'26' for BCH16_xx ecc schemes
-
-	Example(a): For a device with PAGESIZE = 2048 and OOBSIZE = 64 and
-		trying to use BCH16 (ECC_BYTES=26) ecc-scheme.
-		Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B
-		which is greater than capacity of NAND device (OOBSIZE=64)
-		Hence, BCH16 cannot be supported on given device. But it can
-		probably use lower ecc-schemes like BCH8.
-
-	Example(b): For a device with PAGESIZE = 2048 and OOBSIZE = 128 and
-		trying to use BCH16 (ECC_BYTES=26) ecc-scheme.
-		Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B
-		which can be accommodated in the OOB/Spare area of this device
-		(OOBSIZE=128). So this device can use BCH16 ecc-scheme.
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
deleted file mode 100644
index 2133be0d52f2..000000000000
--- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-Device tree bindings for NOR flash connect to TI GPMC
-
-NOR flash connected to the TI GPMC (found on OMAP boards) are represented as
-child nodes of the GPMC controller with a name of "nor".
-
-All timing relevant properties as well as generic GPMC child properties are
-explained in a separate documents. Please refer to
-Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
-
-Required properties:
-- bank-width: 		Width of NOR flash in bytes. GPMC supports 8-bit and
-			16-bit devices and so must be either 1 or 2 bytes.
-- compatible:		Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
-- gpmc,cs-on-ns:		Chip-select assertion time
-- gpmc,cs-rd-off-ns:	Chip-select de-assertion time for reads
-- gpmc,cs-wr-off-ns:	Chip-select de-assertion time for writes
-- gpmc,oe-on-ns:	Output-enable assertion time
-- gpmc,oe-off-ns:	Output-enable de-assertion time
-- gpmc,we-on-ns		Write-enable assertion time
-- gpmc,we-off-ns:	Write-enable de-assertion time
-- gpmc,access-ns:	Start cycle to first data capture (read access)
-- gpmc,rd-cycle-ns:	Total read cycle time
-- gpmc,wr-cycle-ns:	Total write cycle time
-- linux,mtd-name:	Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
-- reg:			Chip-select, base address (relative to chip-select)
-			and size of NOR flash. Note that base address will be
-			typically 0 as this is the start of the chip-select.
-
-Optional properties:
-- gpmc,XXX		Additional GPMC timings and settings parameters. See
-			Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
-
-Optional properties for partition table parsing:
-- #address-cells: should be set to 1
-- #size-cells: should be set to 1
-
-Example:
-
-gpmc: gpmc@6e000000 {
-	compatible = "ti,omap3430-gpmc", "simple-bus";
-	ti,hwmods = "gpmc";
-	reg = <0x6e000000 0x1000>;
-	interrupts = <20>;
-	gpmc,num-cs = <8>;
-	gpmc,num-waitpins = <4>;
-	#address-cells = <2>;
-	#size-cells = <1>;
-
-	ranges = <0 0 0x10000000 0x08000000>;
-
-	nor@0,0 {
-		compatible = "cfi-flash";
-		linux,mtd-name= "intel,pf48f6000m0y1be";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0 0 0x08000000>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
-		partition@0 {
-			label = "bootloader-nor";
-			reg = <0 0x40000>;
-		};
-		partition@40000 {
-			label = "params-nor";
-			reg = <0x40000 0x40000>;
-		};
-		partition@80000 {
-			label = "kernel-nor";
-			reg = <0x80000 0x200000>;
-		};
-		partition@280000 {
-			label = "filesystem-nor";
-			reg = <0x240000 0x7d80000>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
deleted file mode 100644
index e9f01a963a0a..000000000000
--- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Device tree bindings for GPMC connected OneNANDs
-
-GPMC connected OneNAND (found on OMAP boards) are represented as child nodes of
-the GPMC controller with a name of "onenand".
-
-All timing relevant properties as well as generic gpmc child properties are
-explained in a separate documents - please refer to
-Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
-
-Required properties:
-
- - compatible:		"ti,omap2-onenand"
- - reg:			The CS line the peripheral is connected to
- - gpmc,device-width:	Width of the ONENAND device connected to the GPMC
-			in bytes. Must be 1 or 2.
-
-Optional properties:
-
- - int-gpios:		GPIO specifier for the INT pin.
-
-For inline partition table parsing (optional):
-
- - #address-cells: should be set to 1
- - #size-cells: should be set to 1
-
-Example for an OMAP3430 board:
-
-	gpmc: gpmc@6e000000 {
-		compatible = "ti,omap3430-gpmc";
-		ti,hwmods = "gpmc";
-		reg = <0x6e000000 0x1000000>;
-		interrupts = <20>;
-		gpmc,num-cs = <8>;
-		gpmc,num-waitpins = <4>;
-		#address-cells = <2>;
-		#size-cells = <1>;
-
-		onenand@0 {
-			compatible = "ti,omap2-onenand";
-			reg = <0 0 0>; /* CS0, offset 0 */
-			gpmc,device-width = <2>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/* partitions go here */
-		};
-	};
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
index 9d764e654e1d..ba086c34626d 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/gpmi-nand.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale General-Purpose Media Interface (GPMI) binding
+title: Freescale General-Purpose Media Interface (GPMI)
 
 maintainers:
   - Han Xu <han.xu@nxp.com>
@@ -93,7 +93,7 @@ required:
 unevaluatedProperties: false
 
 allOf:
-  - $ref: "nand-controller.yaml"
+  - $ref: nand-controller.yaml
 
   - if:
       properties:
@@ -147,8 +147,6 @@ allOf:
             - description: SoC gpmi io clock
             - description: SoC gpmi bch apb clock
         clock-names:
-          minItems: 2
-          maxItems: 2
           items:
             - const: gpmi_io
             - const: gpmi_bch_apb
diff --git a/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt b/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
index 74981520d6dd..a99de13c7ccd 100644
--- a/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
+++ b/Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt
@@ -17,7 +17,7 @@ spi-nor-controller@10000000 {
 	reg = <0x10000000 0x1000>, <0x14000000 0x1000000>;
 	reg-names = "control", "memory";
 	clocks = <&clock HI3519_FMC_CLK>;
-	spi-nor@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 	};
diff --git a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
index 89aa3ceda592..a7bdb5d3675c 100644
--- a/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/ingenic,nand.yaml
@@ -4,13 +4,14 @@
 $id: http://devicetree.org/schemas/mtd/ingenic,nand.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic SoCs NAND controller devicetree bindings
+title: Ingenic SoCs NAND controller
 
 maintainers:
   - Paul Cercueil <paul@crapouillou.net>
 
 allOf:
   - $ref: nand-controller.yaml#
+  - $ref: /schemas/memory-controllers/ingenic,nemc-peripherals.yaml#
 
 properties:
   compatible:
@@ -31,9 +32,9 @@ properties:
 
   partitions:
     type: object
+    deprecated: true
     description:
       Node containing description of fixed partitions.
-      See Documentation/devicetree/bindings/mtd/partition.txt
 
 patternProperties:
   "^nand@[a-f0-9]$":
@@ -55,80 +56,80 @@ unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
     memory-controller@13410000 {
-      compatible = "ingenic,jz4780-nemc";
-      reg = <0x13410000 0x10000>;
-      #address-cells = <2>;
-      #size-cells = <1>;
-      ranges = <1 0 0x1b000000 0x1000000>,
-         <2 0 0x1a000000 0x1000000>,
-         <3 0 0x19000000 0x1000000>,
-         <4 0 0x18000000 0x1000000>,
-         <5 0 0x17000000 0x1000000>,
-         <6 0 0x16000000 0x1000000>;
-
-      clocks = <&cgu JZ4780_CLK_NEMC>;
-
-      nand-controller@1 {
-        compatible = "ingenic,jz4780-nand";
-        reg = <1 0 0x1000000>;
-
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        ecc-engine = <&bch>;
-
-        ingenic,nemc-tAS = <10>;
-        ingenic,nemc-tAH = <5>;
-        ingenic,nemc-tBP = <10>;
-        ingenic,nemc-tAW = <15>;
-        ingenic,nemc-tSTRV = <100>;
-
-        pinctrl-names = "default";
-        pinctrl-0 = <&pins_nemc>;
-
-        nand@1 {
-          reg = <1>;
-
-          nand-ecc-step-size = <1024>;
-          nand-ecc-strength = <24>;
-          nand-ecc-mode = "hw";
-          nand-on-flash-bbt;
-
-          pinctrl-names = "default";
-          pinctrl-0 = <&pins_nemc_cs1>;
-
-          partitions {
-            compatible = "fixed-partitions";
-            #address-cells = <2>;
-            #size-cells = <2>;
-
-            partition@0 {
-              label = "u-boot-spl";
-              reg = <0x0 0x0 0x0 0x800000>;
+        compatible = "ingenic,jz4780-nemc";
+        reg = <0x13410000 0x10000>;
+        #address-cells = <2>;
+        #size-cells = <1>;
+        ranges = <1 0 0x1b000000 0x1000000>,
+                 <2 0 0x1a000000 0x1000000>,
+                 <3 0 0x19000000 0x1000000>,
+                 <4 0 0x18000000 0x1000000>,
+                 <5 0 0x17000000 0x1000000>,
+                 <6 0 0x16000000 0x1000000>;
+
+        clocks = <&cgu JZ4780_CLK_NEMC>;
+
+        nand-controller@1 {
+            compatible = "ingenic,jz4780-nand";
+            reg = <1 0 0x1000000>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ecc-engine = <&bch>;
+
+            ingenic,nemc-tAS = <10>;
+            ingenic,nemc-tAH = <5>;
+            ingenic,nemc-tBP = <10>;
+            ingenic,nemc-tAW = <15>;
+            ingenic,nemc-tSTRV = <100>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pins_nemc>;
+
+            nand@1 {
+                reg = <1>;
+
+                nand-ecc-step-size = <1024>;
+                nand-ecc-strength = <24>;
+                nand-ecc-mode = "hw";
+                nand-on-flash-bbt;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&pins_nemc_cs1>;
+
+                partitions {
+                    compatible = "fixed-partitions";
+                    #address-cells = <2>;
+                    #size-cells = <2>;
+
+                    partition@0 {
+                        label = "u-boot-spl";
+                        reg = <0x0 0x0 0x0 0x800000>;
+                    };
+
+                    partition@800000 {
+                        label = "u-boot";
+                        reg = <0x0 0x800000 0x0 0x200000>;
+                    };
+
+                    partition@a00000 {
+                        label = "u-boot-env";
+                        reg = <0x0 0xa00000 0x0 0x200000>;
+                    };
+
+                    partition@c00000 {
+                        label = "boot";
+                        reg = <0x0 0xc00000 0x0 0x4000000>;
+                    };
+
+                    partition@4c00000 {
+                        label = "system";
+                        reg = <0x0 0x4c00000 0x1 0xfb400000>;
+                    };
+                };
             };
-
-            partition@800000 {
-              label = "u-boot";
-              reg = <0x0 0x800000 0x0 0x200000>;
-            };
-
-            partition@a00000 {
-              label = "u-boot-env";
-              reg = <0x0 0xa00000 0x0 0x200000>;
-            };
-
-            partition@c00000 {
-              label = "boot";
-              reg = <0x0 0xc00000 0x0 0x4000000>;
-            };
-
-            partition@4c00000 {
-              label = "system";
-              reg = <0x0 0x4c00000 0x1 0xfb400000>;
-            };
-          };
         };
-      };
     };
diff --git a/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
new file mode 100644
index 000000000000..cc3def758e00
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/intel,lgm-ebunand.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/intel,lgm-ebunand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel LGM SoC NAND Controller
+
+allOf:
+  - $ref: nand-controller.yaml
+
+maintainers:
+  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
+
+properties:
+  compatible:
+    const: intel,lgm-ebunand
+
+  reg:
+    maxItems: 6
+
+  reg-names:
+    items:
+      - const: ebunand
+      - const: hsnand
+      - const: nand_cs0
+      - const: nand_cs1
+      - const: addr_sel0
+      - const: addr_sel1
+
+  clocks:
+    maxItems: 1
+
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    properties:
+      reg:
+        minimum: 0
+        maximum: 1
+
+      nand-ecc-mode: true
+
+      nand-ecc-algo:
+        const: hw
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    nand-controller@e0f00000 {
+        compatible = "intel,lgm-ebunand";
+        reg = <0xe0f00000 0x100>,
+              <0xe1000000 0x300>,
+              <0xe1400000 0x8000>,
+              <0xe1c00000 0x1000>,
+              <0x17400000 0x4>,
+              <0x17c00000 0x4>;
+        reg-names = "ebunand", "hsnand", "nand_cs0", "nand_cs1",
+                    "addr_sel0", "addr_sel1";
+        clocks = <&cgu0 125>;
+        dmas = <&dma0 8>, <&dma0 9>;
+        dma-names = "tx", "rx";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+            reg = <0>;
+            nand-ecc-mode = "hw";
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mtd/intel,lgm-nand.yaml b/Documentation/devicetree/bindings/mtd/intel,lgm-nand.yaml
deleted file mode 100644
index 30e0c66ab0eb..000000000000
--- a/Documentation/devicetree/bindings/mtd/intel,lgm-nand.yaml
+++ /dev/null
@@ -1,99 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/mtd/intel,lgm-nand.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Intel LGM SoC NAND Controller Device Tree Bindings
-
-allOf:
-  - $ref: "nand-controller.yaml"
-
-maintainers:
-  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
-
-properties:
-  compatible:
-    const: intel,lgm-nand
-
-  reg:
-    maxItems: 6
-
-  reg-names:
-    items:
-      - const: ebunand
-      - const: hsnand
-      - const: nand_cs0
-      - const: nand_cs1
-      - const: addr_sel0
-      - const: addr_sel1
-
-  clocks:
-    maxItems: 1
-
-  dmas:
-    maxItems: 2
-
-  dma-names:
-    items:
-      - const: tx
-      - const: rx
-
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 0
-
-patternProperties:
-  "^nand@[a-f0-9]+$":
-    type: object
-    properties:
-      reg:
-        minimum: 0
-        maximum: 7
-
-      nand-ecc-mode: true
-
-      nand-ecc-algo:
-        const: hw
-
-    additionalProperties: false
-
-required:
-  - compatible
-  - reg
-  - reg-names
-  - clocks
-  - dmas
-  - dma-names
-  - "#address-cells"
-  - "#size-cells"
-
-additionalProperties: false
-
-examples:
-  - |
-    nand-controller@e0f00000 {
-      compatible = "intel,lgm-nand";
-      reg = <0xe0f00000 0x100>,
-            <0xe1000000 0x300>,
-            <0xe1400000 0x8000>,
-            <0xe1c00000 0x1000>,
-            <0x17400000 0x4>,
-            <0x17c00000 0x4>;
-      reg-names = "ebunand", "hsnand", "nand_cs0", "nand_cs1",
-        "addr_sel0", "addr_sel1";
-      clocks = <&cgu0 125>;
-      dmas = <&dma0 8>, <&dma0 9>;
-      dma-names = "tx", "rx";
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      nand@0 {
-        reg = <0>;
-        nand-ecc-mode = "hw";
-      };
-    };
-
-...
diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
index ed590d7c6e37..89959e5c47ba 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
@@ -10,7 +10,8 @@ maintainers:
   - Rob Herring <robh@kernel.org>
 
 allOf:
-  - $ref: "mtd.yaml#"
+  - $ref: mtd.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   compatible:
@@ -46,11 +47,8 @@ properties:
       identified by the JEDEC READ ID opcode (0x9F).
 
   reg:
-    maxItems: 1
-
-  spi-max-frequency: true
-  spi-rx-bus-width: true
-  spi-tx-bus-width: true
+    minItems: 1
+    maxItems: 2
 
   m25p,fast-read:
     type: boolean
@@ -72,37 +70,34 @@ properties:
       be used on such systems, to denote the absence of a reliable reset
       mechanism.
 
-  label: true
-
-  partitions:
-    type: object
-
-  '#address-cells': true
-  '#size-cells': true
+  reset-gpios:
+    description:
+      A GPIO line connected to the RESET (active low) signal of the device.
+      If "broken-flash-reset" is present then having this property does not
+      make any difference.
 
-patternProperties:
-  # Note: use 'partitions' node for new users
-  '^partition@':
-    type: object
+  spi-cpol: true
+  spi-cpha: true
 
-  "^otp(-[0-9]+)?$":
-    type: object
+dependencies:
+  spi-cpol: [ spi-cpha ]
+  spi-cpha: [ spi-cpol ]
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
         flash@0 {
-            #address-cells = <1>;
-            #size-cells = <1>;
             compatible = "spansion,m25p80", "jedec,spi-nor";
             reg = <0>;
             spi-max-frequency = <40000000>;
             m25p,fast-read;
+            reset-gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
index 6d60bc3063f5..64c06aa05ac7 100644
--- a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
+++ b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt
@@ -19,7 +19,7 @@ accuracy:)
 - nxp,wr_low: WR_LOW
 
 Optional subnodes:
-- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt
+- Partitions, see Documentation/devicetree/bindings/mtd/mtd.yaml
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt b/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt
index d94edc0fc554..39f17630a301 100644
--- a/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt
+++ b/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt
@@ -20,7 +20,7 @@ clock speed:)
 - nxp,rsetup: Read setup time (R_SETUP)
 
 Optional subnodes:
-- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt
+- Partitions, see Documentation/devicetree/bindings/mtd/mtd.yaml
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
new file mode 100644
index 000000000000..a6e7f123eda7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mediatek,mtk-nfc.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mediatek,mtk-nfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek(MTK) SoCs raw NAND FLASH controller (NFC)
+
+maintainers:
+  - Xiangsheng Hou <xiangsheng.hou@mediatek.com>
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-nfc
+      - mediatek,mt2712-nfc
+      - mediatek,mt7622-nfc
+
+  reg:
+    items:
+      - description: Base physical address and size of NFI.
+
+  interrupts:
+    items:
+      - description: NFI interrupt
+
+  clocks:
+    items:
+      - description: clock used for the controller
+      - description: clock used for the pad
+
+  clock-names:
+    items:
+      - const: nfi_clk
+      - const: pad_clk
+
+  ecc-engine:
+    description: device-tree node of the required ECC engine.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    $ref: nand-chip.yaml#
+    unevaluatedProperties: false
+    properties:
+      reg:
+        maximum: 1
+      nand-on-flash-bbt: true
+      nand-ecc-mode:
+        const: hw
+
+allOf:
+  - $ref: nand-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt2701-nfc
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-step-size:
+              enum: [ 512, 1024 ]
+            nand-ecc-strength:
+              enum: [4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+                     40, 44, 48, 52, 56, 60]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt2712-nfc
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-step-size:
+              enum: [ 512, 1024 ]
+            nand-ecc-strength:
+              enum: [4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36,
+                     40, 44, 48, 52, 56, 60, 68, 72, 80]
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7622-nfc
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-step-size:
+              const: 512
+            nand-ecc-strength:
+              enum: [4, 6, 8, 10, 12]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ecc-engine
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        nand-controller@1100d000 {
+            compatible = "mediatek,mt2701-nfc";
+            reg = <0 0x1100d000 0 0x1000>;
+            interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&pericfg CLK_PERI_NFI>,
+                     <&pericfg CLK_PERI_NFI_PAD>;
+            clock-names = "nfi_clk", "pad_clk";
+            ecc-engine = <&bch>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            nand@0 {
+                reg = <0>;
+
+                nand-on-flash-bbt;
+                nand-ecc-mode = "hw";
+                nand-ecc-step-size = <1024>;
+                nand-ecc-strength = <24>;
+
+                partitions {
+                    compatible = "fixed-partitions";
+                    #address-cells = <1>;
+                    #size-cells = <1>;
+
+                    preloader@0 {
+                        label = "pl";
+                        read-only;
+                        reg = <0x0 0x400000>;
+                    };
+                    android@400000 {
+                        label = "android";
+                        reg = <0x400000 0x12c00000>;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml b/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
new file mode 100644
index 000000000000..505baf1e8830
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mediatek,nand-ecc-engine.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mediatek,nand-ecc-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek(MTK) SoCs NAND ECC engine
+
+maintainers:
+  - Xiangsheng Hou <xiangsheng.hou@mediatek.com>
+
+description: |
+  MTK NAND ECC engine can cowork with MTK raw NAND and SPI NAND controller.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-ecc
+      - mediatek,mt2712-ecc
+      - mediatek,mt7622-ecc
+      - mediatek,mt7986-ecc
+
+  reg:
+    items:
+      - description: Base physical address and size of ECC.
+
+  interrupts:
+    items:
+      - description: ECC interrupt
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: nfiecc_clk
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2701-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        bch: ecc@1100e000 {
+            compatible = "mediatek,mt2701-ecc";
+            reg = <0 0x1100e000 0 0x1000>;
+            interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&pericfg CLK_PERI_NFI_ECC>;
+            clock-names = "nfiecc_clk";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml
index 2cdf6bf3dc4a..00882892f47e 100644
--- a/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml
+++ b/Documentation/devicetree/bindings/mtd/microchip,mchp48l640.yaml
@@ -4,7 +4,7 @@
 $id: "http://devicetree.org/schemas/mtd/microchip,mchp48l640.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Microchip 48l640 (and similar) serial EERAM bindings
+title: Microchip 48l640 (and similar) serial EERAM
 
 maintainers:
   - Heiko Schocher <hs@denx.de>
@@ -22,24 +22,25 @@ properties:
   reg:
     maxItems: 1
 
-  spi-max-frequency: true
-
 required:
   - compatible
   - reg
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
     spi {
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      eeram@0 {
-        compatible = "microchip,48l640";
-        reg = <0>;
-        spi-max-frequency = <20000000>;
-      };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeram@0 {
+            compatible = "microchip,48l640";
+            reg = <0>;
+            spi-max-frequency = <20000000>;
+        };
     };
 ...
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
index f827984936f6..f8c976898a95 100644
--- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
+++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
@@ -13,6 +13,10 @@ description: |
   Flash chips (Memory Technology Devices) are often used for solid state
   file systems on embedded devices.
 
+allOf:
+  - $ref: mtd.yaml#
+  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -44,7 +48,9 @@ properties:
               - numonyx,js28f128
               - sst,sst39vf320
               - xlnx,xps-mch-emc-2.00.a
-          - const: cfi-flash
+          - enum:
+              - cfi-flash
+              - jedec-flash
       - items:
           - enum:
               - cypress,cy7c1019dv33-10zsxi
@@ -119,14 +125,24 @@ properties:
   big-endian: true
   little-endian: true
 
-patternProperties:
-  '@[0-9a-f]+$':
-    $ref: partitions/partition.yaml
-
 required:
   - compatible
   - reg
 
+if:
+  properties:
+    compatible:
+      contains:
+        const: cortina,gemini-flash
+then:
+  properties:
+    syscon:
+      $ref: /schemas/types.yaml#/definitions/phandle
+      description:
+        Phandle to the syscon controller
+  required:
+    - syscon
+
 # FIXME: A parent bus may define timing properties
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/mtd/mtd.yaml b/Documentation/devicetree/bindings/mtd/mtd.yaml
index 376b679cfc70..da3d488c335f 100644
--- a/Documentation/devicetree/bindings/mtd/mtd.yaml
+++ b/Documentation/devicetree/bindings/mtd/mtd.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/mtd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MTD (Memory Technology Device) Device Tree Bindings
+title: MTD (Memory Technology Device)
 
 maintainers:
   - Miquel Raynal <miquel.raynal@bootlin.com>
@@ -12,7 +12,7 @@ maintainers:
 
 properties:
   $nodename:
-    pattern: "^flash(@.*)?$"
+    pattern: "^(flash|.*sram)(@.*)?$"
 
   label:
     description:
@@ -21,10 +21,30 @@ properties:
       based name) in order to ease flash device identification and/or
       describe what they are used for.
 
+  '#address-cells':
+    deprecated: true
+
+  '#size-cells':
+    deprecated: true
+
+  partitions:
+    $ref: /schemas/mtd/partitions/partitions.yaml
+
+    required:
+      - compatible
+
 patternProperties:
+  "@[0-9a-f]+$":
+    $ref: partitions/partition.yaml
+    deprecated: true
+
+  "^partition@[0-9a-f]+":
+    $ref: partitions/partition.yaml
+    deprecated: true
+
   "^otp(-[0-9]+)?$":
-    type: object
     $ref: ../nvmem/nvmem.yaml#
+    unevaluatedProperties: false
 
     description: |
       An OTP memory region. Some flashes provide a one-time-programmable
@@ -40,6 +60,7 @@ patternProperties:
     required:
       - compatible
 
+# This is a generic file other binding inherit from
 additionalProperties: true
 
 examples:
diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
deleted file mode 100644
index 4d3ec5e4ff8a..000000000000
--- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
+++ /dev/null
@@ -1,176 +0,0 @@
-MTK SoCs NAND FLASH controller (NFC) DT binding
-
-This file documents the device tree bindings for MTK SoCs NAND controllers.
-The functional split of the controller requires two drivers to operate:
-the nand controller interface driver and the ECC engine driver.
-
-The hardware description for both devices must be captured as device
-tree nodes.
-
-1) NFC NAND Controller Interface (NFI):
-=======================================
-
-The first part of NFC is NAND Controller Interface (NFI) HW.
-Required NFI properties:
-- compatible:			Should be one of
-				"mediatek,mt2701-nfc",
-				"mediatek,mt2712-nfc",
-				"mediatek,mt7622-nfc".
-- reg:				Base physical address and size of NFI.
-- interrupts:			Interrupts of NFI.
-- clocks:			NFI required clocks.
-- clock-names:			NFI clocks internal name.
-- ecc-engine:			Required ECC Engine node.
-- #address-cells:		NAND chip index, should be 1.
-- #size-cells:			Should be 0.
-
-Example:
-
-	nandc: nfi@1100d000 {
-		compatible = "mediatek,mt2701-nfc";
-		reg = <0 0x1100d000 0 0x1000>;
-		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_NFI>,
-			 <&pericfg CLK_PERI_NFI_PAD>;
-		clock-names = "nfi_clk", "pad_clk";
-		ecc-engine = <&bch>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-        };
-
-Platform related properties, should be set in {platform_name}.dts:
-- children nodes:	NAND chips.
-
-Children nodes properties:
-- reg:			Chip Select Signal, default 0.
-			Set as reg = <0>, <1> when need 2 CS.
-Optional:
-- nand-on-flash-bbt:	Store BBT on NAND Flash.
-- nand-ecc-mode:	the NAND ecc mode (check driver for supported modes)
-- nand-ecc-step-size:	Number of data bytes covered by a single ECC step.
-			valid values:
-			512 and 1024 on mt2701 and mt2712.
-			512 only on mt7622.
-			1024 is recommended for large page NANDs.
-- nand-ecc-strength:	Number of bits to correct per ECC step.
-			The valid values that each controller supports:
-			mt2701: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28,
-				32, 36, 40, 44, 48, 52, 56, 60.
-			mt2712: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 28,
-				32, 36, 40, 44, 48, 52, 56, 60, 68, 72, 80.
-			mt7622: 4, 6, 8, 10, 12, 14, 16.
-			The strength should be calculated as follows:
-			E = (S - F) * 8 / B
-			S = O / (P / Q)
-				E :	nand-ecc-strength.
-				S :	spare size per sector.
-				F :	FDM size, should be in the range [1,8].
-					It is used to store free oob data.
-				O :	oob size.
-				P :	page size.
-				Q :	nand-ecc-step-size.
-				B :	number of parity bits needed to correct
-					1 bitflip.
-					According to MTK NAND controller design,
-					this number depends on max ecc step size
-					that MTK NAND controller supports.
-					If max ecc step size supported is 1024,
-					then it should be always 14. And if max
-					ecc step size is 512, then it should be
-					always 13.
-			If the result does not match any one of the listed
-			choices above, please select the smaller valid value from
-			the list.
-			(otherwise the driver will do the adjustment at runtime)
-- pinctrl-names:	Default NAND pin GPIO setting name.
-- pinctrl-0:		GPIO setting node.
-
-Example:
-	&pio {
-		nand_pins_default: nanddefault {
-			pins_dat {
-				pinmux = <MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7>,
-					 <MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6>,
-					 <MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4>,
-					 <MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3>,
-					 <MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0>,
-					 <MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1>,
-					 <MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5>,
-					 <MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8>,
-					 <MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2>;
-				input-enable;
-				drive-strength = <MTK_DRIVE_8mA>;
-				bias-pull-up;
-			};
-
-			pins_we {
-				pinmux = <MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB>;
-				drive-strength = <MTK_DRIVE_8mA>;
-				bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
-			};
-
-			pins_ale {
-				pinmux = <MT2701_PIN_116_MSDC0_CMD__FUNC_NALE>;
-				drive-strength = <MTK_DRIVE_8mA>;
-				bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
-			};
-		};
-	};
-
-	&nandc {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_pins_default>;
-		nand@0 {
-			reg = <0>;
-			nand-on-flash-bbt;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <24>;
-			nand-ecc-step-size = <1024>;
-		};
-	};
-
-NAND chip optional subnodes:
-- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt
-
-Example:
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			preloader@0 {
-				label = "pl";
-				read-only;
-				reg = <0x00000000 0x00400000>;
-			};
-			android@00400000 {
-				label = "android";
-				reg = <0x00400000 0x12c00000>;
-			};
-		};
-	};
-
-2) ECC Engine:
-==============
-
-Required BCH properties:
-- compatible:	Should be one of
-		"mediatek,mt2701-ecc",
-		"mediatek,mt2712-ecc",
-		"mediatek,mt7622-ecc".
-- reg:		Base physical address and size of ECC.
-- interrupts:	Interrupts of ECC.
-- clocks:	ECC required clocks.
-- clock-names:	ECC clocks internal name.
-
-Example:
-
-	bch: ecc@1100e000 {
-		compatible = "mediatek,mt2701-ecc";
-		reg = <0 0x1100e000 0 0x1000>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&pericfg CLK_PERI_NFI_ECC>;
-		clock-names = "nfiecc_clk";
-	};
diff --git a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
index 73b86f2226c7..cf4198e43d7f 100644
--- a/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/mxc-nand.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/mtd/mxc-nand.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale's mxc_nand binding
+title: Freescale's mxc_nand
 
 maintainers:
   - Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
 
 allOf:
-  - $ref: "nand-controller.yaml"
+  - $ref: nand-controller.yaml
 
 properties:
   compatible:
@@ -37,6 +37,4 @@ examples:
         compatible = "fsl,imx27-nand";
         reg = <0xd8000000 0x1000>;
         interrupts = <29>;
-        nand-bus-width = <8>;
-        nand-ecc-mode = "hw";
     };
diff --git a/Documentation/devicetree/bindings/mtd/mxicy,nand-ecc-engine.yaml b/Documentation/devicetree/bindings/mtd/mxicy,nand-ecc-engine.yaml
new file mode 100644
index 000000000000..f92e7234deab
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/mxicy,nand-ecc-engine.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/mxicy,nand-ecc-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Macronix NAND ECC engine
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    const: mxicy,nand-ecc-engine-rev3
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    /* External configuration */
+    spi_controller0: spi@43c30000 {
+        compatible = "mxicy,mx25f0a-spi";
+        reg = <0x43c30000 0x10000>, <0xa0000000 0x4000000>;
+        reg-names = "regs", "dirmap";
+        clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
+        clock-names = "send_clk", "send_dly_clk", "ps_clk";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "spi-nand";
+            reg = <0>;
+            nand-ecc-engine = <&ecc_engine0>;
+        };
+    };
+
+    ecc_engine0: ecc@43c40000 {
+        compatible = "mxicy,nand-ecc-engine-rev3";
+        reg = <0x43c40000 0x10000>;
+    };
+
+  - |
+    /* Pipelined configuration */
+    spi_controller1: spi@43c30000 {
+        compatible = "mxicy,mx25f0a-spi";
+        reg = <0x43c30000 0x10000>, <0xa0000000 0x4000000>;
+        reg-names = "regs", "dirmap";
+        clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>;
+        clock-names = "send_clk", "send_dly_clk", "ps_clk";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        nand-ecc-engine = <&ecc_engine1>;
+
+        flash@0 {
+            compatible = "spi-nand";
+            reg = <0>;
+            nand-ecc-engine = <&spi_controller1>;
+        };
+    };
+
+    ecc_engine1: ecc@43c40000 {
+        compatible = "mxicy,nand-ecc-engine-rev3";
+        reg = <0x43c40000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/nand-chip.yaml b/Documentation/devicetree/bindings/mtd/nand-chip.yaml
new file mode 100644
index 000000000000..609d4a4ddd80
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nand-chip.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/nand-chip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAND Chip Common Properties
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: mtd.yaml#
+
+description: |
+  This file covers the generic description of a NAND chip. It implies that the
+  bus interface should not be taken into account: both raw NAND devices and
+  SPI-NAND devices are concerned by this description.
+
+properties:
+  reg:
+    description:
+      Contains the chip-select IDs.
+
+  nand-ecc-engine:
+    description: |
+      A phandle on the hardware ECC engine if any. There are
+      basically three possibilities:
+      1/ The ECC engine is part of the NAND controller, in this
+      case the phandle should reference the parent node.
+      2/ The ECC engine is part of the NAND part (on-die), in this
+      case the phandle should reference the node itself.
+      3/ The ECC engine is external, in this case the phandle should
+      reference the specific ECC engine node.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nand-use-soft-ecc-engine:
+    description: Use a software ECC engine.
+    type: boolean
+
+  nand-no-ecc-engine:
+    description: Do not use any ECC correction.
+    type: boolean
+
+  nand-ecc-algo:
+    description:
+      Desired ECC algorithm.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [hamming, bch, rs]
+
+  nand-ecc-strength:
+    description:
+      Maximum number of bits that can be corrected per ECC step.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+
+  nand-ecc-step-size:
+    description:
+      Number of data bytes covered by a single ECC step.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+
+  secure-regions:
+    description:
+      Regions in the NAND chip which are protected using a secure element
+      like Trustzone. This property contains the start address and size of
+      the secure regions present.
+    $ref: /schemas/types.yaml#/definitions/uint64-matrix
+
+required:
+  - reg
+
+# This file can be referenced by more specific devices (like spi-nands)
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index bd217e6f5018..f70a32d2d9d4 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/nand-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NAND Chip and NAND Controller Generic Binding
+title: NAND Controller Common Properties
 
 maintainers:
   - Miquel Raynal <miquel.raynal@bootlin.com>
@@ -39,8 +39,6 @@ properties:
   ranges: true
 
   cs-gpios:
-    minItems: 1
-    maxItems: 8
     description:
       Array of chip-select available to the controller. The first
       entries are a 1:1 mapping of the available chip-select on the
@@ -48,51 +46,26 @@ properties:
       chip-select as needed may follow and should be phandles of GPIO
       lines. 'reg' entries of the NAND chip subnodes become indexes of
       this array when this property is present.
+    minItems: 1
+    maxItems: 8
 
 patternProperties:
   "^nand@[a-f0-9]$":
-    type: object
+    $ref: nand-chip.yaml#
+
     properties:
       reg:
         description:
-          Contains the native Ready/Busy IDs.
-
-      nand-ecc-engine:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/phandle
-        description: |
-          A phandle on the hardware ECC engine if any. There are
-          basically three possibilities:
-          1/ The ECC engine is part of the NAND controller, in this
-          case the phandle should reference the parent node.
-          2/ The ECC engine is part of the NAND part (on-die), in this
-          case the phandle should reference the node itself.
-          3/ The ECC engine is external, in this case the phandle should
-          reference the specific ECC engine node.
-
-      nand-use-soft-ecc-engine:
-        type: boolean
-        description: Use a software ECC engine.
-
-      nand-no-ecc-engine:
-        type: boolean
-        description: Do not use any ECC correction.
+          Contains the chip-select IDs.
 
       nand-ecc-placement:
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/string
-          - enum: [ oob, interleaved ]
         description:
           Location of the ECC bytes. This location is unknown by default
           but can be explicitly set to "oob", if all ECC bytes are
           known to be stored in the OOB area, or "interleaved" if ECC
           bytes will be interleaved with regular data in the main area.
-
-      nand-ecc-algo:
-        description:
-          Desired ECC algorithm.
         $ref: /schemas/types.yaml#/definitions/string
-        enum: [hamming, bch, rs]
+        enum: [ oob, interleaved ]
 
       nand-bus-width:
         description:
@@ -102,7 +75,6 @@ patternProperties:
         default: 8
 
       nand-on-flash-bbt:
-        $ref: /schemas/types.yaml#/definitions/flag
         description:
           With this property, the OS will search the device for a Bad
           Block Table (BBT). If not found, it will create one, reserve
@@ -111,21 +83,9 @@ patternProperties:
           few pages of all the blocks will be scanned at boot time to
           find Bad Block Markers (BBM). These markers will help to
           build a volatile BBT in RAM.
-
-      nand-ecc-strength:
-        description:
-          Maximum number of bits that can be corrected per ECC step.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 1
-
-      nand-ecc-step-size:
-        description:
-          Number of data bytes covered by a single ECC step.
-        $ref: /schemas/types.yaml#/definitions/uint32
-        minimum: 1
+        $ref: /schemas/types.yaml#/definitions/flag
 
       nand-ecc-maximize:
-        $ref: /schemas/types.yaml#/definitions/flag
         description:
           Whether or not the ECC strength should be maximized. The
           maximum ECC strength is both controller and chip
@@ -134,18 +94,19 @@ patternProperties:
           constraint into account. This is particularly useful when
           only the in-band area is used by the upper layers, and you
           want to make your NAND as reliable as possible.
+        $ref: /schemas/types.yaml#/definitions/flag
 
       nand-is-boot-medium:
-        $ref: /schemas/types.yaml#/definitions/flag
         description:
           Whether or not the NAND chip is a boot medium. Drivers might
           use this information to select ECC algorithms supported by
           the boot ROM or similar restrictions.
+        $ref: /schemas/types.yaml#/definitions/flag
 
       nand-rb:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
         description:
           Contains the native Ready/Busy IDs.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
 
       rb-gpios:
         description:
@@ -154,12 +115,12 @@ patternProperties:
           Ready/Busy pins. Active state refers to the NAND ready state and
           should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
 
-      secure-regions:
-        $ref: /schemas/types.yaml#/definitions/uint64-matrix
+      wp-gpios:
         description:
-          Regions in the NAND chip which are protected using a secure element
-          like Trustzone. This property contains the start address and size of
-          the secure regions present.
+          Contains one GPIO descriptor for the Write Protect pin.
+          Active state refers to the NAND Write Protect state and should be
+          set to GPIOD_ACTIVE_LOW unless the signal is inverted.
+        maxItems: 1
 
     required:
       - reg
@@ -168,6 +129,7 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+# This is a generic file other binding inherit from and extend
 additionalProperties: true
 
 examples:
@@ -181,10 +143,7 @@ examples:
 
       nand@0 {
         reg = <0>; /* Native CS */
-        nand-use-soft-ecc-engine;
-        nand-ecc-algo = "bch";
-
-        /* controller specific properties */
+        /* NAND chip specific properties */
       };
 
       nand@1 {
diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt
deleted file mode 100644
index ead90e8274d6..000000000000
--- a/Documentation/devicetree/bindings/mtd/partition.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Flash partitions in device tree
-===============================
-
-Flash devices can be partitioned into one or more functional ranges (e.g. "boot
-code", "nvram", "kernel").
-
-Different devices may be partitioned in a different ways. Some may use a fixed
-flash layout set at production time. Some may use on-flash table that describes
-the geometry and naming/purpose of each functional region. It is also possible
-to see these methods mixed.
-
-To assist system software in locating partitions, we allow describing which
-method is used for a given flash device. To describe the method there should be
-a subnode of the flash device that is named 'partitions'. It must have a
-'compatible' property, which is used to identify the method to use.
-
-When a single partition is represented with a DT node (it depends on a used
-format) it may also be described using above rules ('compatible' and optionally
-some extra properties / subnodes). It allows describing more complex,
-hierarchical (multi-level) layouts and should be used if there is some
-significant relation between partitions or some partition internally uses
-another partitioning method.
-
-Available bindings are listed in the "partitions" subdirectory.
-
-
-Deprecated: partitions defined in flash node
-============================================
-
-For backwards compatibility partitions as direct subnodes of the flash device are
-supported. This use is discouraged.
-NOTE: also for backwards compatibility, direct subnodes that have a compatible
-string are not considered partitions, as they may be used for other bindings.
diff --git a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.txt b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.txt
deleted file mode 100644
index d5c5616f6db5..000000000000
--- a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-ARM AFS - ARM Firmware Suite Partitions
-=======================================
-
-The ARM Firmware Suite is a flash partitioning system found on the
-ARM reference designs: Integrator AP, Integrator CP, Versatile AB,
-Versatile PB, the RealView family, Versatile Express and Juno.
-
-Required properties:
-- compatible : (required) must be "arm,arm-firmware-suite"
-
-Example:
-
-flash@0 {
-	partitions {
-		compatible = "arm,arm-firmware-suite";
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml
new file mode 100644
index 000000000000..97618847ee35
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/arm,arm-firmware-suite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Firmware Suite (AFS) Partitions
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+select: false
+
+description: |
+  The ARM Firmware Suite is a flash partitioning system found on the
+  ARM reference designs: Integrator AP, Integrator CP, Versatile AB,
+  Versatile PB, the RealView family, Versatile Express and Juno.
+
+properties:
+  compatible:
+    const: arm,arm-firmware-suite
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "arm,arm-firmware-suite";
+    };
+...
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
index 7b113e5e3421..94f0742b375c 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
@@ -17,6 +17,8 @@ description: |
 maintainers:
   - Rafał Miłecki <rafal@milecki.pl>
 
+select: false
+
 properties:
   compatible:
     const: brcm,bcm4908-partitions
@@ -29,7 +31,7 @@ properties:
 
 patternProperties:
   "^partition@[0-9a-f]+$":
-    $ref: "partition.yaml#"
+    $ref: partition.yaml#
     properties:
       compatible:
         const: brcm,bcm4908-firmware
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt
deleted file mode 100644
index 1d61a029395e..000000000000
--- a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Broadcom BCM47xx Partitions
-===========================
-
-Broadcom is one of hardware manufacturers providing SoCs (BCM47xx) used in
-home routers. Their BCM947xx boards using CFE bootloader have several partitions
-without any on-flash partition table. On some devices their sizes and/or
-meanings can also vary so fixed partitioning can't be used.
-
-Discovering partitions on these devices is possible thanks to having a special
-header and/or magic signature at the beginning of each of them. They are also
-block aligned which is important for determinig a size.
-
-Most of partitions use ASCII text based magic for determining a type. More
-complex partitions (like TRX with its HDR0 magic) may include extra header
-containing some details, including a length.
-
-A list of supported partitions includes:
-1) Bootloader with Broadcom's CFE (Common Firmware Environment)
-2) NVRAM with configuration/calibration data
-3) Device manufacturer's data with some default values (e.g. SSIDs)
-4) TRX firmware container which can hold up to 4 subpartitions
-5) Backup TRX firmware used after failed upgrade
-
-As mentioned earlier, role of some partitions may depend on extra configuration.
-For example both: main firmware and backup firmware use the same TRX format with
-the same header. To distinguish currently used firmware a CFE's environment
-variable "bootpartition" is used.
-
-
-Devices using Broadcom partitions described above should should have flash node
-with a subnode named "partitions" using following properties:
-
-Required properties:
-- compatible : (required) must be "brcm,bcm947xx-cfe-partitions"
-
-Example:
-
-flash@0 {
-	partitions {
-		compatible = "brcm,bcm947xx-cfe-partitions";
-	};
-};
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml
new file mode 100644
index 000000000000..939e7b50db22
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/brcm,bcm947xx-cfe-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM47xx Partitions
+
+description: |
+  Broadcom is one of hardware manufacturers providing SoCs (BCM47xx) used in
+  home routers. Their BCM947xx boards using CFE bootloader have several
+  partitions without any on-flash partition table. On some devices their sizes
+  and/or meanings can also vary so fixed partitioning can't be used.
+
+  Discovering partitions on these devices is possible thanks to having a special
+  header and/or magic signature at the beginning of each of them. They are also
+  block aligned which is important for determinig a size.
+
+  Most of partitions use ASCII text based magic for determining a type. More
+  complex partitions (like TRX with its HDR0 magic) may include extra header
+  containing some details, including a length.
+
+  A list of supported partitions includes:
+  1) Bootloader with Broadcom's CFE (Common Firmware Environment)
+  2) NVRAM with configuration/calibration data
+  3) Device manufacturer's data with some default values (e.g. SSIDs)
+  4) TRX firmware container which can hold up to 4 subpartitions
+  5) Backup TRX firmware used after failed upgrade
+
+  As mentioned earlier, role of some partitions may depend on extra
+  configuration. For example both: main firmware and backup firmware use the
+  same TRX format with the same header. To distinguish currently used firmware a
+  CFE's environment variable "bootpartition" is used.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+select: false
+
+properties:
+  compatible:
+    const: brcm,bcm947xx-cfe-partitions
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "brcm,bcm947xx-cfe-partitions";
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
index ea4cace6a955..331e564f29dc 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
@@ -19,7 +19,11 @@ maintainers:
 
 properties:
   compatible:
-    const: fixed-partitions
+    oneOf:
+      - const: fixed-partitions
+      - items:
+          - const: sercomm,sc-partitions
+          - const: fixed-partitions
 
   "#address-cells": true
 
@@ -27,7 +31,17 @@ properties:
 
 patternProperties:
   "@[0-9a-f]+$":
-    $ref: "partition.yaml#"
+    $ref: partition.yaml#
+
+    properties:
+      sercomm,scpart-id:
+        description: Partition id in Sercomm partition map. Mtd parser
+          uses this id to find a record in the partition map containing
+          offset and size of the current partition. The values from
+          partition map overrides partition offset and size defined in
+          reg property of the dts. Frequently these values are the same,
+          but may differ if device has bad eraseblocks on a flash.
+        $ref: /schemas/types.yaml#/definitions/uint32
 
 required:
   - "#address-cells"
@@ -52,6 +66,7 @@ examples:
             reg = <0x0100000 0x200000>;
         };
     };
+
   - |
     partitions {
         compatible = "fixed-partitions";
@@ -62,8 +77,10 @@ examples:
         partition@0 {
             label = "filesystem";
             reg = <0x00000000 0x1 0x00000000>;
+            linux,rootfs;
         };
     };
+
   - |
     partitions {
         compatible = "fixed-partitions";
@@ -82,6 +99,7 @@ examples:
             reg = <0x2 0x00000000 0x1 0x00000000>;
         };
     };
+
   - |
     partitions {
         compatible = "fixed-partitions";
@@ -119,3 +137,30 @@ examples:
             };
         };
     };
+
+  - |
+    partitions {
+        compatible = "sercomm,sc-partitions", "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            label = "u-boot";
+            reg = <0x0 0x100000>;
+            sercomm,scpart-id = <0>;
+            read-only;
+        };
+
+        partition@100000 {
+            label = "dynamic partition map";
+            reg = <0x100000 0x100000>;
+            sercomm,scpart-id = <1>;
+        };
+
+        partition@200000 {
+            label = "Factory";
+            reg = <0x200000 0x100000>;
+            sercomm,scpart-id = <2>;
+            read-only;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
index 99249cdfbfb3..c5fa78ff7125 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
@@ -18,6 +18,8 @@ description: |
 maintainers:
   - Rafał Miłecki <rafal@milecki.pl>
 
+select: false
+
 properties:
   compatible:
     const: linksys,ns-partitions
@@ -30,7 +32,7 @@ properties:
 
 patternProperties:
   "^partition@[0-9a-f]+$":
-    $ref: "partition.yaml#"
+    $ref: partition.yaml#
     properties:
       compatible:
         items:
diff --git a/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml
index 5cdd2efa9132..5474d63268dc 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/nvmem-cells.yaml
@@ -17,6 +17,7 @@ maintainers:
   - Ansuel Smith <ansuelsmth@gmail.com>
 
 allOf:
+  - $ref: /schemas/mtd/partitions/partition.yaml#
   - $ref: /schemas/nvmem/nvmem.yaml#
 
 properties:
@@ -26,7 +27,7 @@ properties:
 required:
   - compatible
 
-additionalProperties: true
+unevaluatedProperties: false
 
 examples:
   - |
@@ -84,7 +85,6 @@ examples:
             compatible = "nvmem-cells";
             label = "calibration";
             reg = <0xf00000 0x100000>;
-            ranges = <0 0xf00000 0x100000>;
             #address-cells = <1>;
             #size-cells = <1>;
 
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
index e1ac08064425..cdffbb9cedc2 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
@@ -11,6 +11,17 @@ description: |
   relative offset and size specified. Depending on partition function extra
   properties can be used.
 
+  A partition may be dynamically allocated by a specific parser at runtime.
+  In this specific case, a specific suffix is required to the node name.
+  Everything after 'partition-' will be used as the partition name to compare
+  with the one dynamically allocated by the specific parser.
+  If the partition contains invalid char a label can be provided that will
+  be used instead of the node name to make the comparison.
+  This is used to assign an OF node to the dynamiccally allocated partition
+  so that subsystem like NVMEM can provide an OF node and declare NVMEM cells.
+  The OF node will be assigned only if the partition label declared match the
+  one assigned by the parser at runtime.
+
 maintainers:
   - Rafał Miłecki <rafal@milecki.pl>
 
@@ -41,7 +52,17 @@ properties:
       immune to paired-pages corruptions
     type: boolean
 
-required:
-  - reg
+  linux,rootfs:
+    description: Marks partition that contains root filesystem to mount and boot
+      user space from
+
+if:
+  not:
+    required: [ reg ]
+then:
+  properties:
+    $nodename:
+      pattern: '^partition-.*$'
 
+# This is a generic file other binding inherit from and extend
 additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
new file mode 100644
index 000000000000..2edc65e0e361
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Partitions
+
+description: |
+  This binding is generic and describes the content of the partitions container
+  node. All partition parsers must be referenced here.
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+oneOf:
+  - $ref: arm,arm-firmware-suite.yaml
+  - $ref: brcm,bcm4908-partitions.yaml
+  - $ref: brcm,bcm947xx-cfe-partitions.yaml
+  - $ref: fixed-partitions.yaml
+  - $ref: linksys,ns-partitions.yaml
+  - $ref: qcom,smem-part.yaml
+  - $ref: redboot-fis.yaml
+
+properties:
+  compatible: true
+
+  '#address-cells':
+    enum: [1, 2]
+
+  '#size-cells':
+    enum: [1, 2]
+
+patternProperties:
+  "^partition(-.+|@[0-9a-f]+)$":
+    $ref: partition.yaml
+
+required:
+  - compatible
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
index cf3f8c1e035d..1c2b4e780ca9 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/qcom,smem-part.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mtd/partitions/qcom,smem-part.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm SMEM NAND flash partition parser binding
+title: Qualcomm SMEM NAND flash partition parser
 
 maintainers:
   - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
@@ -15,10 +15,16 @@ description: |
   varies between partition table revisions. V3 supports maximum 16 partitions
   and V4 supports 48 partitions.
 
+select: false
+
 properties:
   compatible:
     const: qcom,smem-part
 
+patternProperties:
+  "^partition-[0-9a-z]+$":
+    $ref: nvmem-cells.yaml
+
 required:
   - compatible
 
@@ -31,3 +37,26 @@ examples:
             compatible = "qcom,smem-part";
         };
     };
+
+  - |
+    /* Example declaring dynamic partition */
+    flash {
+        partitions {
+            compatible = "qcom,smem-part";
+
+            partition-art {
+                compatible = "nvmem-cells";
+                #address-cells = <1>;
+                #size-cells = <1>;
+                label = "0:art";
+
+                macaddr_art_0: macaddr@0 {
+                    reg = <0x0 0x6>;
+                };
+
+                macaddr_art_6: macaddr@6 {
+                    reg = <0x6 0x6>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml
index fee8d81b5276..ba7445cd69e8 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml
@@ -16,6 +16,8 @@ description: The FLASH Image System (FIS) directory is a flash description
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
 
+select: false
+
 properties:
   compatible:
     const: redboot-fis
@@ -26,6 +28,10 @@ properties:
       device. On a flash memory with 32KB eraseblocks, 0 means the first
       eraseblock at 0x00000000, 1 means the second eraseblock at 0x00008000 and so on.
 
+  '#address-cells': false
+
+  '#size-cells': false
+
 required:
   - compatible
   - fis-index-block
diff --git a/Documentation/devicetree/bindings/mtd/partitions/tplink,safeloader-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/tplink,safeloader-partitions.yaml
new file mode 100644
index 000000000000..a24bbaac3a90
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/tplink,safeloader-partitions.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/tplink,safeloader-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TP-Link SafeLoader partitions
+
+description: |
+  TP-Link home routers store various data on flash (e.g. bootloader,
+  flash layout, firmware, product info, configuration, calibration
+  data). That requires flash partitioning.
+
+  Flash space layout of TP-Link devices is stored on flash itself using
+  a custom ASCII-based format. That format was first found in TP-Link
+  devices with a custom SafeLoader bootloader. Later it was adapted to
+  CFE and U-Boot bootloaders.
+
+  Partitions specified in partitions table cover whole flash space. Some
+  contain static data that shouldn't get modified (device's MAC or WiFi
+  calibration data). Others are semi-static (like kernel). Finally some
+  partitions contain fully changeable content (like rootfs).
+
+  This binding describes partitioning method and defines offset of ASCII
+  based partitions table. That offset is picked at manufacturing process
+  and doesn't change.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: tplink,safeloader-partitions
+
+  partitions-table-offset:
+    description: Flash offset of partitions table
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+  "^partition-.*$":
+    $ref: partition.yaml#
+
+required:
+  - partitions-table-offset
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "tplink,safeloader-partitions";
+        partitions-table-offset = <0x100000>;
+
+        partition-file-system {
+                linux,rootfs;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml b/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml
new file mode 100644
index 000000000000..3c56efe48efd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/u-boot.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/u-boot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: U-Boot bootloader partition
+
+description: |
+  U-Boot is a bootlodaer commonly used in embedded devices. It's almost always
+  located on some kind of flash device.
+
+  Device configuration is stored as a set of environment variables that are
+  located in a (usually standalone) block of data.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+  - $ref: partition.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: brcm,u-boot
+        description: |
+          Broadcom stores environment variables inside a U-Boot partition. They
+          can be identified by a custom header with magic value.
+
+patternProperties:
+  "^partition-.*$":
+    $ref: partition.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            compatible = "brcm,u-boot";
+            reg = <0x0 0x100000>;
+            label = "u-boot";
+
+            partition-u-boot-env {
+            };
+        };
+
+        partition@100000 {
+            reg = <0x100000 0x1ff00000>;
+            label = "firmware";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
index 84ad7ff30121..00c991ffa6c4 100644
--- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
+++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
@@ -31,9 +31,6 @@ properties:
       - const: core
       - const: aon
 
-  "#address-cells": true
-  "#size-cells": true
-
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
@@ -49,7 +46,7 @@ patternProperties:
           - 512
 
 allOf:
-  - $ref: "nand-controller.yaml#"
+  - $ref: nand-controller.yaml#
 
   - if:
       properties:
@@ -102,6 +99,31 @@ allOf:
             - const: rx
             - const: cmd
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq806x-nand
+
+    then:
+      properties:
+        qcom,boot-partitions:
+          $ref: /schemas/types.yaml#/definitions/uint32-matrix
+          items:
+            items:
+              - description: offset
+              - description: size
+          description:
+            Boot partition use a different layout where the 4 bytes of spare
+            data are not protected by ECC. Use this to declare these special
+            partitions by defining first the offset and then the size.
+
+            It's in the form of <offset1 size1 offset2 size2 offset3 ...>
+            and should be declared in ascending order.
+
+            Refer to the ipq8064 example on how to use this special binding.
+
 required:
   - compatible
   - reg
@@ -114,83 +136,85 @@ examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
     nand-controller@1ac00000 {
-      compatible = "qcom,ipq806x-nand";
-      reg = <0x1ac00000 0x800>;
+        compatible = "qcom,ipq806x-nand";
+        reg = <0x1ac00000 0x800>;
+
+        clocks = <&gcc EBI2_CLK>,
+                 <&gcc EBI2_AON_CLK>;
+        clock-names = "core", "aon";
 
-      clocks = <&gcc EBI2_CLK>,
-               <&gcc EBI2_AON_CLK>;
-      clock-names = "core", "aon";
+        dmas = <&adm_dma 3>;
+        dma-names = "rxtx";
+        qcom,cmd-crci = <15>;
+        qcom,data-crci = <3>;
 
-      dmas = <&adm_dma 3>;
-      dma-names = "rxtx";
-      qcom,cmd-crci = <15>;
-      qcom,data-crci = <3>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-      #address-cells = <1>;
-      #size-cells = <0>;
+        nand@0 {
+            reg = <0>;
 
-      nand@0 {
-        reg = <0>;
+            nand-ecc-strength = <4>;
+            nand-bus-width = <8>;
 
-        nand-ecc-strength = <4>;
-        nand-bus-width = <8>;
+            qcom,boot-partitions = <0x0 0x58a0000>;
 
-        partitions {
-          compatible = "fixed-partitions";
-          #address-cells = <1>;
-          #size-cells = <1>;
+            partitions {
+                compatible = "fixed-partitions";
+                #address-cells = <1>;
+                #size-cells = <1>;
 
-          partition@0 {
-            label = "boot-nand";
-            reg = <0 0x58a0000>;
-          };
+                partition@0 {
+                    label = "boot-nand";
+                    reg = <0 0x58a0000>;
+                };
 
-          partition@58a0000 {
-            label = "fs-nand";
-            reg = <0x58a0000 0x4000000>;
-          };
+                partition@58a0000 {
+                    label = "fs-nand";
+                    reg = <0x58a0000 0x4000000>;
+                };
+            };
         };
-      };
     };
 
     #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
     nand-controller@79b0000 {
-      compatible = "qcom,ipq4019-nand";
-      reg = <0x79b0000 0x1000>;
-
-      clocks = <&gcc GCC_QPIC_CLK>,
-               <&gcc GCC_QPIC_AHB_CLK>;
-      clock-names = "core", "aon";
-
-      dmas = <&qpicbam 0>,
-             <&qpicbam 1>,
-             <&qpicbam 2>;
-      dma-names = "tx", "rx", "cmd";
-
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      nand@0 {
-        reg = <0>;
-        nand-ecc-strength = <4>;
-        nand-bus-width = <8>;
-
-        partitions {
-          compatible = "fixed-partitions";
-          #address-cells = <1>;
-          #size-cells = <1>;
-
-          partition@0 {
-            label = "boot-nand";
-            reg = <0 0x58a0000>;
-          };
-
-          partition@58a0000 {
-            label = "fs-nand";
-            reg = <0x58a0000 0x4000000>;
-          };
+        compatible = "qcom,ipq4019-nand";
+        reg = <0x79b0000 0x1000>;
+
+        clocks = <&gcc GCC_QPIC_CLK>,
+                 <&gcc GCC_QPIC_AHB_CLK>;
+        clock-names = "core", "aon";
+
+        dmas = <&qpicbam 0>,
+               <&qpicbam 1>,
+               <&qpicbam 2>;
+        dma-names = "tx", "rx", "cmd";
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nand@0 {
+            reg = <0>;
+            nand-ecc-strength = <4>;
+            nand-bus-width = <8>;
+
+            partitions {
+                compatible = "fixed-partitions";
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                partition@0 {
+                    label = "boot-nand";
+                    reg = <0 0x58a0000>;
+                };
+
+                partition@58a0000 {
+                    label = "fs-nand";
+                    reg = <0x58a0000 0x4000000>;
+                };
+            };
         };
-      };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/mtd/renesas-nandc.yaml b/Documentation/devicetree/bindings/mtd/renesas-nandc.yaml
new file mode 100644
index 000000000000..cc6b8274e6a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/renesas-nandc.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/renesas-nandc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Gen3 & RZ/N1x NAND flash controller
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: nand-controller.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,r9a06g032-nandc
+          - const: renesas,rzn1-nandc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: APB host controller clock
+      - description: External NAND bus clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: eclk
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    nand-controller@40102000 {
+        compatible = "renesas,r9a06g032-nandc", "renesas,rzn1-nandc";
+        reg = <0x40102000 0x2000>;
+        interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>;
+        clock-names = "hclk", "eclk";
+        power-domains = <&sysctrl>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
index 0922536b1811..7eb1d0a38565 100644
--- a/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/rockchip,nand-controller.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Rockchip SoCs NAND FLASH Controller (NFC)
 
 allOf:
-  - $ref: "nand-controller.yaml#"
+  - $ref: nand-controller.yaml#
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
@@ -19,7 +19,9 @@ properties:
       - const: rockchip,rk2928-nfc
       - const: rockchip,rv1108-nfc
       - items:
-          - const: rockchip,rk3036-nfc
+          - enum:
+              - rockchip,rk3036-nfc
+              - rockchip,rk3128-nfc
           - const: rockchip,rk2928-nfc
       - items:
           - const: rockchip,rk3308-nfc
@@ -96,8 +98,7 @@ patternProperties:
 
       rockchip,boot-ecc-strength:
         enum: [16, 24, 40, 60, 70]
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
+        $ref: /schemas/types.yaml#/definitions/uint32
         description: |
           If specified it indicates that a different BCH/ECC setting is
           supported by the boot ROM.
diff --git a/Documentation/devicetree/bindings/mtd/spi-nand.txt b/Documentation/devicetree/bindings/mtd/spi-nand.txt
deleted file mode 100644
index 8b51f3b6d55c..000000000000
--- a/Documentation/devicetree/bindings/mtd/spi-nand.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-SPI NAND flash
-
-Required properties:
-- compatible: should be "spi-nand"
-- reg: should encode the chip-select line used to access the NAND chip
diff --git a/Documentation/devicetree/bindings/mtd/spi-nand.yaml b/Documentation/devicetree/bindings/mtd/spi-nand.yaml
new file mode 100644
index 000000000000..77a8727c7966
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/spi-nand.yaml
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/spi-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-NAND flash
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: nand-chip.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: spi-nand
+
+  reg:
+    description: Encode the chip-select line on the SPI bus
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
index 29c5ef24ac6a..986e85ccebc7 100644
--- a/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/mtd/st,stm32-fmc2-nand.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics Flexible Memory Controller 2 (FMC2) Bindings
+title: STMicroelectronics Flexible Memory Controller 2 (FMC2)
 
 maintainers:
-  - Christophe Kerello <christophe.kerello@st.com>
+  - Christophe Kerello <christophe.kerello@foss.st.com>
 
 properties:
   compatible:
@@ -45,7 +45,7 @@ patternProperties:
         enum: [1, 4, 8]
 
 allOf:
-  - $ref: "nand-controller.yaml#"
+  - $ref: nand-controller.yaml#
 
   - if:
       properties:
@@ -101,31 +101,32 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/stm32mp1-clks.h>
     #include <dt-bindings/reset/stm32mp1-resets.h>
+
     nand-controller@58002000 {
-      compatible = "st,stm32mp15-fmc2";
-      reg = <0x58002000 0x1000>,
-            <0x80000000 0x1000>,
-            <0x88010000 0x1000>,
-            <0x88020000 0x1000>,
-            <0x81000000 0x1000>,
-            <0x89010000 0x1000>,
-            <0x89020000 0x1000>;
-      interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-      dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
-             <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
-             <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
-      dma-names = "tx", "rx", "ecc";
-      clocks = <&rcc FMC_K>;
-      resets = <&rcc FMC_R>;
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      nand@0 {
-        reg = <0>;
-        nand-on-flash-bbt;
+        compatible = "st,stm32mp15-fmc2";
+        reg = <0x58002000 0x1000>,
+              <0x80000000 0x1000>,
+              <0x88010000 0x1000>,
+              <0x88020000 0x1000>,
+              <0x81000000 0x1000>,
+              <0x89010000 0x1000>,
+              <0x89020000 0x1000>;
+        interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&mdma1 20 0x2 0x12000a02 0x0 0x0>,
+               <&mdma1 20 0x2 0x12000a08 0x0 0x0>,
+               <&mdma1 21 0x2 0x12000a0a 0x0 0x0>;
+        dma-names = "tx", "rx", "ecc";
+        clocks = <&rcc FMC_K>;
+        resets = <&rcc FMC_R>;
         #address-cells = <1>;
-        #size-cells = <1>;
-      };
+        #size-cells = <0>;
+
+        nand@0 {
+            reg = <0>;
+            nand-on-flash-bbt;
+            #address-cells = <1>;
+            #size-cells = <1>;
+        };
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml
index 30b458c41cac..4774c92e7fc4 100644
--- a/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml
+++ b/Documentation/devicetree/bindings/mtd/ti,am654-hbmc.yaml
@@ -44,26 +44,26 @@ additionalProperties: false
 examples:
   - |
     bus {
-      #address-cells = <2>;
-      #size-cells = <2>;
-
-      hbmc: memory-controller@47034000 {
-        compatible = "ti,am654-hbmc";
-        reg = <0x0 0x47034000 0x0 0x100>,
-              <0x5 0x00000000 0x1 0x0000000>;
-        ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */
-                 <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */
-        clocks = <&k3_clks 102 0>;
         #address-cells = <2>;
-        #size-cells = <1>;
-        power-domains = <&k3_pds 55>;
-        mux-controls = <&hbmc_mux 0>;
+        #size-cells = <2>;
 
-        flash@0,0 {
-            compatible = "cypress,hyperflash", "cfi-flash";
-            reg = <0x0 0x0 0x4000000>;
-            #address-cells = <1>;
+        hbmc: memory-controller@47034000 {
+            compatible = "ti,am654-hbmc";
+            reg = <0x0 0x47034000 0x0 0x100>,
+                  <0x5 0x00000000 0x1 0x0000000>;
+            ranges = <0x0 0x0 0x5 0x00000000 0x4000000>, /* CS0 - 64MB */
+                     <0x1 0x0 0x5 0x04000000 0x4000000>; /* CS1 - 64MB */
+            clocks = <&k3_clks 102 0>;
+            #address-cells = <2>;
             #size-cells = <1>;
+            power-domains = <&k3_pds 55>;
+            mux-controls = <&hbmc_mux 0>;
+
+            flash@0,0 {
+                compatible = "cypress,hyperflash", "cfi-flash";
+                reg = <0x0 0x0 0x4000000>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+            };
         };
-      };
     };
diff --git a/Documentation/devicetree/bindings/mtd/ti,elm.yaml b/Documentation/devicetree/bindings/mtd/ti,elm.yaml
new file mode 100644
index 000000000000..87128c004596
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ti,elm.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,elm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Error Location Module (ELM).
+
+maintainers:
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  ELM module is used together with GPMC and NAND Flash to detect
+  errors and the location of the error based on BCH algorithms
+  so they can be corrected if possible.
+
+properties:
+  compatible:
+    enum:
+      - ti,am3352-elm
+      - ti,am64-elm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Functional clock.
+
+  clock-names:
+    items:
+      - const: fck
+
+  power-domains:
+    maxItems: 1
+
+  ti,hwmods:
+    description:
+      Name of the HWMOD associated with ELM. This is for legacy
+      platforms only.
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,am64-elm
+    then:
+      required:
+        - clocks
+        - clock-names
+        - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    elm: ecc@0 {
+        compatible = "ti,am3352-elm";
+        reg = <0x0 0x2000>;
+        interrupts = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml
new file mode 100644
index 000000000000..115682fa81b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,gpmc-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments GPMC NAND Flash controller.
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  GPMC NAND controller/Flash is represented as a child of the
+  GPMC controller node.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - ti,am64-nand
+          - ti,omap2-nand
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Interrupt for fifoevent
+      - description: Interrupt for termcount
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  ti,nand-ecc-opt:
+    description: Desired ECC algorithm
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [sw, ham1, bch4, bch8, bch16]
+
+  ti,nand-xfer-type:
+    description: Data transfer method between controller and chip.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [prefetch-polled, polled, prefetch-dma, prefetch-irq]
+    default: prefetch-polled
+
+  ti,elm-id:
+    description:
+      phandle to the ELM (Error Location Module).
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nand-bus-width:
+    description:
+      Bus width to the NAND chip
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [8, 16]
+    default: 8
+
+  rb-gpios:
+    description:
+      GPIO connection to R/B signal from NAND chip
+    maxItems: 1
+
+patternProperties:
+  "@[0-9a-f]+$":
+    $ref: /schemas/mtd/partitions/partition.yaml
+
+allOf:
+  - $ref: /schemas/memory-controllers/ti,gpmc-child.yaml
+
+required:
+  - compatible
+  - reg
+  - ti,nand-ecc-opt
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpmc: memory-controller@50000000 {
+      compatible = "ti,am3352-gpmc";
+      dmas = <&edma 52 0>;
+      dma-names = "rxtx";
+      clocks = <&l3s_gclk>;
+      clock-names = "fck";
+      reg = <0x50000000 0x2000>;
+      interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+      gpmc,num-cs = <7>;
+      gpmc,num-waitpins = <2>;
+      #address-cells = <2>;
+      #size-cells = <1>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
+      gpio-controller;
+      #gpio-cells = <2>;
+
+      ranges = <0 0 0x08000000 0x01000000>;   /* CS0 space. Min partition = 16MB */
+      nand@0,0 {
+        compatible = "ti,omap2-nand";
+        reg = <0 0 4>;          /* device IO registers */
+        interrupt-parent = <&gpmc>;
+        interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+                     <1 IRQ_TYPE_NONE>; /* termcount */
+        ti,nand-xfer-type = "prefetch-dma";
+        ti,nand-ecc-opt = "bch16";
+        ti,elm-id = <&elm>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        /* NAND generic properties */
+        nand-bus-width = <8>;
+        rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;  /* gpmc_wait0 */
+
+        /* GPMC properties*/
+        gpmc,device-width = <1>;
+
+        partition@0 {
+          label = "NAND.SPL";
+          reg = <0x00000000 0x00040000>;
+        };
+        partition@1 {
+          label = "NAND.SPL.backup1";
+          reg = <0x00040000 0x00040000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml
new file mode 100644
index 000000000000..7d3ace4f5505
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,gpmc-onenand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OneNAND over Texas Instruments GPMC bus.
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+  - Roger Quadros <rogerq@kernel.org>
+
+description:
+  GPMC connected OneNAND (found on OMAP boards) are represented
+  as child nodes of the GPMC controller.
+
+properties:
+  $nodename:
+    pattern: "^onenand@[0-9],[0,9]$"
+
+  compatible:
+    const: ti,omap2-onenand
+
+  reg:
+    items:
+      - description: |
+          Chip Select number, register offset and size of
+          OneNAND register window.
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  int-gpios:
+    description: GPIO specifier for the INT pin.
+
+patternProperties:
+  "@[0-9a-f]+$":
+    $ref: /schemas/mtd/partitions/partition.yaml
+
+allOf:
+  - $ref: /schemas/memory-controllers/ti,gpmc-child.yaml
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    gpmc: memory-controller@6e000000 {
+      compatible = "ti,omap3430-gpmc";
+      reg = <0x6e000000 0x02d0>;
+      interrupts = <20>;
+      gpmc,num-cs = <8>;
+      gpmc,num-waitpins = <4>;
+      clocks = <&l3s_clkctrl>;
+      clock-names = "fck";
+      #address-cells = <2>;
+      #size-cells = <1>;
+
+      ranges = <0 0 0x01000000 0x01000000>,   /* 16 MB for OneNAND */
+               <1 0 0x02000000 0x01000000>;   /* 16 MB for smc91c96 */
+
+      onenand@0,0 {
+        compatible = "ti,omap2-onenand";
+        reg = <0 0 0x20000>;    /* CS0, offset 0, IO size 128K */
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+          label = "bootloader";
+          reg = <0x00000000 0x00100000>;
+        };
+
+        partition@100000 {
+          label = "config";
+          reg = <0x00100000 0x002c0000>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/mux/gpio-mux.yaml b/Documentation/devicetree/bindings/mux/gpio-mux.yaml
index 0a7c8d64981a..b597c1f2c577 100644
--- a/Documentation/devicetree/bindings/mux/gpio-mux.yaml
+++ b/Documentation/devicetree/bindings/mux/gpio-mux.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mux/gpio-mux.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: GPIO-based multiplexer controller bindings
+title: GPIO-based multiplexer controller
 
 maintainers:
   - Peter Rosin <peda@axentia.se>
@@ -26,7 +26,10 @@ properties:
       List of gpios used to control the multiplexer, least significant bit first.
 
   '#mux-control-cells':
-    const: 0
+    enum: [ 0, 1 ]
+
+  '#mux-state-cells':
+    enum: [ 1, 2 ]
 
   idle-state:
     default: -1
@@ -34,7 +37,11 @@ properties:
 required:
   - compatible
   - mux-gpios
-  - "#mux-control-cells"
+anyOf:
+  - required:
+      - "#mux-control-cells"
+  - required:
+      - "#mux-state-cells"
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/mux/mux-consumer.yaml b/Documentation/devicetree/bindings/mux/mux-consumer.yaml
index 7af93298ab5c..9e2d78a78e40 100644
--- a/Documentation/devicetree/bindings/mux/mux-consumer.yaml
+++ b/Documentation/devicetree/bindings/mux/mux-consumer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mux/mux-consumer.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common multiplexer controller consumer bindings
+title: Common multiplexer controller consumer
 
 maintainers:
   - Peter Rosin <peda@axentia.se>
@@ -25,6 +25,17 @@ description: |
   strings to label each of the mux controllers listed in the "mux-controls"
   property.
 
+  If it is required to provide the state that the mux controller needs to
+  be set to, the property "mux-states" must be used. An optional property
+  "mux-state-names" can be used to provide a list of strings, to label
+  each of the multiplixer states listed in the "mux-states" property.
+
+  Properties "mux-controls" and "mux-states" can be used depending on how
+  the consumers want to control the mux controller. If the consumer needs
+  needs to set multiple states in a mux controller, then property
+  "mux-controls" can be used. If the consumer needs to set the mux
+  controller to a given state then property "mux-states" can be used.
+
   mux-ctrl-specifier typically encodes the chip-relative mux controller number.
   If the mux controller chip only provides a single mux controller, the
   mux-ctrl-specifier can typically be left out.
@@ -35,12 +46,22 @@ properties:
   mux-controls:
     $ref: /schemas/types.yaml#/definitions/phandle-array
 
+  mux-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+
   mux-control-names:
     description:
       Devices that use more than a single mux controller can use the
       "mux-control-names" property to map the name of the requested mux
       controller to an index into the list given by the "mux-controls" property.
 
+  mux-state-names:
+    description:
+      Devices that use more than a single multiplexer state can use the
+      "mux-state-names" property to map the name of the requested mux
+      controller to an index into the list given by the "mux-states"
+      property.
+
 additionalProperties: true
 
 ...
diff --git a/Documentation/devicetree/bindings/mux/mux-controller.yaml b/Documentation/devicetree/bindings/mux/mux-controller.yaml
index 736a84c3b6a5..8b943082a241 100644
--- a/Documentation/devicetree/bindings/mux/mux-controller.yaml
+++ b/Documentation/devicetree/bindings/mux/mux-controller.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mux/mux-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common multiplexer controller provider bindings
+title: Common multiplexer controller provider
 
 maintainers:
   - Peter Rosin <peda@axentia.se>
@@ -25,7 +25,9 @@ description: |
   --------------------
 
   Mux controller nodes must specify the number of cells used for the
-  specifier using the '#mux-control-cells' property.
+  specifier using the '#mux-control-cells' or '#mux-state-cells' property.
+  The value of '#mux-state-cells' will always be one greater than the value
+  of '#mux-control-cells'.
 
   Optionally, mux controller nodes can also specify the state the mux should
   have when it is idle. The idle-state property is used for this. If the
@@ -67,6 +69,8 @@ select:
           pattern: '^mux-controller'
     - required:
         - '#mux-control-cells'
+    - required:
+        - '#mux-state-cells'
 
 properties:
   $nodename:
@@ -75,6 +79,9 @@ properties:
   '#mux-control-cells':
     enum: [ 0, 1 ]
 
+  '#mux-state-cells':
+    enum: [ 1, 2 ]
+
   idle-state:
     $ref: /schemas/types.yaml#/definitions/int32
     minimum: -2
@@ -179,4 +186,21 @@ examples:
             };
         };
     };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mux1: mux-controller {
+        compatible = "gpio-mux";
+        #mux-state-cells = <1>;
+        mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
+    };
+
+    transceiver4: can-phy4 {
+        compatible = "ti,tcan1042";
+        #phy-cells = <0>;
+        max-bitrate = <5000000>;
+        standby-gpios = <&exp_som 7 GPIO_ACTIVE_HIGH>;
+        mux-states = <&mux1 1>;
+    };
 ...
diff --git a/Documentation/devicetree/bindings/mux/reg-mux.yaml b/Documentation/devicetree/bindings/mux/reg-mux.yaml
index 60d5746eb39d..dc4be092fc2f 100644
--- a/Documentation/devicetree/bindings/mux/reg-mux.yaml
+++ b/Documentation/devicetree/bindings/mux/reg-mux.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/mux/reg-mux.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic register bitfield-based multiplexer controller bindings
+title: Generic register bitfield-based multiplexer controller
 
 maintainers:
   - Peter Rosin <peda@axentia.se>
@@ -25,8 +25,12 @@ properties:
     const: 1
 
   mux-reg-masks:
-    description: an array of register offset and pre-shifted bitfield mask
-      pairs, each describing a single mux control.
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: register offset
+        - description: pre-shifted bitfield mask
+    description: Each entry pair describes a single mux control.
 
   idle-states: true
 
@@ -96,7 +100,6 @@ examples:
 
     #include <dt-bindings/mux/mux.h>
     syscon@1000 {
-        compatible = "fsl,imx7d-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
         reg = <0x1000 0x100>;
 
         mux2: mux-controller {
diff --git a/Documentation/devicetree/bindings/nds32/andestech-boards b/Documentation/devicetree/bindings/nds32/andestech-boards
deleted file mode 100644
index f5d75693e3c7..000000000000
--- a/Documentation/devicetree/bindings/nds32/andestech-boards
+++ /dev/null
@@ -1,40 +0,0 @@
-Andestech(nds32) AE3XX Platform
------------------------------------------------------------------------------
-The AE3XX prototype demonstrates the AE3XX example platform on the FPGA. It
-is composed of one Andestech(nds32) processor and AE3XX.
-
-Required properties (in root node):
-- compatible = "andestech,ae3xx";
-
-Example:
-/dts-v1/;
-/ {
-	compatible = "andestech,ae3xx";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-};
-
-Andestech(nds32) AG101P Platform
------------------------------------------------------------------------------
-AG101P is a generic SoC Platform IP that works with any of Andestech(nds32)
-processors to provide a cost-effective and high performance solution for
-majority of embedded systems in variety of application domains. Users may
-simply attach their IP on one of the system buses together with certain glue
-logics to complete a SoC solution for a specific application. With
-comprehensive simulation and design environments, users may evaluate the
-system performance of their applications and track bugs of their designs
-efficiently. The optional hardware development platform further provides real
-system environment for early prototyping and software/hardware co-development.
-
-Required properties (in root node):
-	compatible = "andestech,ag101p";
-
-Example:
-/dts-v1/;
-/ {
-	compatible = "andestech,ag101p";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-};
diff --git a/Documentation/devicetree/bindings/nds32/atl2c.txt b/Documentation/devicetree/bindings/nds32/atl2c.txt
deleted file mode 100644
index da8ab8e7ae9b..000000000000
--- a/Documentation/devicetree/bindings/nds32/atl2c.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Andestech L2 cache Controller
-
-The level-2 cache controller plays an important role in reducing memory latency
-for high performance systems, such as thoese designs with AndesCore processors.
-Level-2 cache controller in general enhances overall system performance
-signigicantly and the system power consumption might be reduced as well by
-reducing DRAM accesses.
-
-This binding specifies what properties must be available in the device tree
-representation of an Andestech L2 cache controller.
-
-Required properties:
-	- compatible:
-		Usage: required
-		Value type: <string>
-		Definition: "andestech,atl2c"
-	- reg : Physical base address and size of cache controller's memory mapped
-	- cache-unified : Specifies the cache is a unified cache.
-	- cache-level : Should be set to 2 for a level 2 cache.
-
-* Example
-
-	cache-controller@e0500000 {
-		compatible = "andestech,atl2c";
-		reg = <0xe0500000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/nds32/cpus.txt b/Documentation/devicetree/bindings/nds32/cpus.txt
deleted file mode 100644
index 6f9e311b6589..000000000000
--- a/Documentation/devicetree/bindings/nds32/cpus.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Andestech Processor Binding
-
-This binding specifies what properties must be available in the device tree
-representation of a Andestech Processor Core, which is the root node in the
-tree.
-
-Required properties:
-
-	- compatible:
-		Usage: required
-		Value type: <string>
-		Definition: Should be "andestech,<core_name>", "andestech,nds32v3" as fallback.
-		Must contain "andestech,nds32v3" as the most generic value, in addition to
-		one of the following identifiers for a particular CPU core:
-		"andestech,n13"
-		"andestech,n15"
-		"andestech,d15"
-		"andestech,n10"
-		"andestech,d10"
-	- device_type
-		Usage: required
-		Value type: <string>
-		Definition: must be "cpu"
-	- reg: Contains CPU index.
-	- clock-frequency: Contains the clock frequency for CPU, in Hz.
-
-* Examples
-
-/ {
-	cpus {
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "andestech,n13", "andestech,nds32v3";
-			reg = <0x0>;
-			clock-frequency = <60000000>
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/actions,owl-emac.yaml b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml
index 1626e0a821b0..5718ab4654b2 100644
--- a/Documentation/devicetree/bindings/net/actions,owl-emac.yaml
+++ b/Documentation/devicetree/bindings/net/actions,owl-emac.yaml
@@ -16,7 +16,7 @@ description: |
   operation modes at 10/100 Mb/s data transfer rates.
 
 allOf:
-  - $ref: "ethernet-controller.yaml#"
+  - $ref: ethernet-controller.yaml#
 
 properties:
   compatible:
@@ -51,6 +51,10 @@ properties:
     description:
       Phandle to the device containing custom config.
 
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
index 1129f2b58e98..929cf8c0b0fd 100644
--- a/Documentation/devicetree/bindings/net/adi,adin.yaml
+++ b/Documentation/devicetree/bindings/net/adi,adin.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Analog Devices ADIN1200/ADIN1300 PHY
 
 maintainers:
-  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+  - Alexandru Tachici <alexandru.tachici@analog.com>
 
 description: |
   Bindings for Analog Devices Industrial Ethernet PHYs
@@ -36,6 +36,22 @@ properties:
     enum: [ 4, 8, 12, 16, 20, 24 ]
     default: 8
 
+  adi,phy-output-clock:
+    description: |
+      Select clock output on GP_CLK pin. Two clocks are available:
+      A 25MHz reference and a free-running 125MHz.
+      The phy can alternatively automatically switch between the reference and
+      the 125MHz clocks based on its internal state.
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - 25mhz-reference
+      - 125mhz-free-running
+      - adaptive-free-running
+
+  adi,phy-output-reference-clock:
+    description: Enable 25MHz reference clock output on CLK25_REF pin.
+    type: boolean
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/net/adi,adin1110.yaml b/Documentation/devicetree/bindings/net/adi,adin1110.yaml
new file mode 100644
index 000000000000..9de865295d7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/adi,adin1110.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/adi,adin1110.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADI ADIN1110 MAC-PHY
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  The ADIN1110 is a low power single port 10BASE-T1L MAC-
+  PHY designed for industrial Ethernet applications. It integrates
+  an Ethernet PHY core with a MAC and all the associated analog
+  circuitry, input and output clock buffering.
+
+  The ADIN2111 is a low power, low complexity, two-Ethernet ports
+  switch with integrated 10BASE-T1L PHYs and one serial peripheral
+  interface (SPI) port. The device is designed for industrial Ethernet
+  applications using low power constrained nodes and is compliant
+  with the IEEE 802.3cg-2019 Ethernet standard for long reach
+  10 Mbps single pair Ethernet (SPE).
+
+  The device has a 4-wire SPI interface for communication
+  between the MAC and host processor.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,adin1110
+      - adi,adin2111
+
+  reg:
+    maxItems: 1
+
+  adi,spi-crc:
+    description: |
+      Enable CRC8 checks on SPI read/writes.
+    type: boolean
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO connected to active low reset
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@0 {
+            compatible = "adi,adin2111";
+            reg = <0>;
+            spi-max-frequency = <24500000>;
+
+            adi,spi-crc;
+
+            interrupt-parent = <&gpio>;
+            interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+
+            local-mac-address = [ 00 11 22 33 44 55 ];
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
index 8d8560a67abf..eb26623dab51 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-emac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 EMAC Ethernet Controller Device Tree Bindings
+title: Allwinner A10 EMAC Ethernet Controller
 
 allOf:
-  - $ref: "ethernet-controller.yaml#"
+  - $ref: ethernet-controller.yaml#
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -29,6 +29,10 @@ properties:
   allwinner,sram:
     description: Phandle to the device SRAM
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to SRAM
+          - description: register value for device
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
index 767193ec1d32..85f552b907f3 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/net/allwinner,sun4i-a10-mdio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 MDIO Controller Device Tree Bindings
+title: Allwinner A10 MDIO Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
 allOf:
-  - $ref: "mdio.yaml#"
+  - $ref: mdio.yaml#
 
 # Select every compatible, including the deprecated ones. This way, we
 # will be able to report a warning when we have that compatible, since
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
index 703d0d886884..3bd912ed7c7e 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/allwinner,sun7i-a20-gmac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A20 GMAC Device Tree Bindings
+title: Allwinner A20 GMAC
 
 allOf:
   - $ref: "snps,dwmac.yaml#"
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
index 9eb4bb529ad5..47bc2057e629 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/allwinner,sun8i-a83t-emac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A83t EMAC Device Tree Bindings
+title: Allwinner A83t EMAC
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -15,13 +15,14 @@ properties:
     oneOf:
       - const: allwinner,sun8i-a83t-emac
       - const: allwinner,sun8i-h3-emac
-      - const: allwinner,sun8i-r40-emac
+      - const: allwinner,sun8i-r40-gmac
       - const: allwinner,sun8i-v3s-emac
       - const: allwinner,sun50i-a64-emac
       - items:
           - enum:
               - allwinner,sun20i-d1-emac
               - allwinner,sun50i-h6-emac
+              - allwinner,sun50i-h616-emac0
           - const: allwinner,sun50i-a64-emac
 
   reg:
@@ -39,6 +40,9 @@ properties:
   clock-names:
     const: stmmaceth
 
+  phy-supply:
+    description: PHY regulator
+
   syscon:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -93,7 +97,7 @@ allOf:
         compatible:
           contains:
             enum:
-              - allwinner,sun8i-r40-emac
+              - allwinner,sun8i-r40-gmac
 
     then:
       properties:
@@ -122,6 +126,7 @@ allOf:
 
         mdio-mux:
           type: object
+          unevaluatedProperties: false
 
           properties:
             compatible:
@@ -132,17 +137,18 @@ allOf:
               description:
                 Phandle to EMAC MDIO.
 
+            "#address-cells":
+              const: 1
+
+            "#size-cells":
+              const: 0
+
             mdio@1:
-              type: object
+              $ref: mdio.yaml#
+              unevaluatedProperties: false
               description: Internal MDIO Bus
 
               properties:
-                "#address-cells":
-                  const: 1
-
-                "#size-cells":
-                  const: 0
-
                 compatible:
                   const: allwinner,sun8i-h3-mdio-internal
 
@@ -168,16 +174,11 @@ allOf:
 
 
             mdio@2:
-              type: object
+              $ref: mdio.yaml#
+              unevaluatedProperties: false
               description: External MDIO Bus (H3 only)
 
               properties:
-                "#address-cells":
-                  const: 1
-
-                "#size-cells":
-                  const: 0
-
                 reg:
                   const: 2
 
diff --git a/Documentation/devicetree/bindings/net/altera_tse.txt b/Documentation/devicetree/bindings/net/altera_tse.txt
deleted file mode 100644
index 0b7d4d3758ea..000000000000
--- a/Documentation/devicetree/bindings/net/altera_tse.txt
+++ /dev/null
@@ -1,113 +0,0 @@
-* Altera Triple-Speed Ethernet MAC driver (TSE)
-
-Required properties:
-- compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should
-		be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE.
-		ALTR is supported for legacy device trees, but is deprecated.
-		altr should be used for all new designs.
-- reg: Address and length of the register set for the device. It contains
-  the information of registers in the same order as described by reg-names
-- reg-names: Should contain the reg names
-  "control_port": MAC configuration space region
-  "tx_csr":       xDMA Tx dispatcher control and status space region
-  "tx_desc":      MSGDMA Tx dispatcher descriptor space region
-  "rx_csr" :      xDMA Rx dispatcher control and status space region
-  "rx_desc":      MSGDMA Rx dispatcher descriptor space region
-  "rx_resp":      MSGDMA Rx dispatcher response space region
-  "s1":		  SGDMA descriptor memory
-- interrupts: Should contain the TSE interrupts and it's mode.
-- interrupt-names: Should contain the interrupt names
-  "rx_irq":       xDMA Rx dispatcher interrupt
-  "tx_irq":       xDMA Tx dispatcher interrupt
-- rx-fifo-depth: MAC receive FIFO buffer depth in bytes
-- tx-fifo-depth: MAC transmit FIFO buffer depth in bytes
-- phy-mode: See ethernet.txt in the same directory.
-- phy-handle: See ethernet.txt in the same directory.
-- phy-addr: See ethernet.txt in the same directory. A configuration should
-		include phy-handle or phy-addr.
-- altr,has-supplementary-unicast:
-		If present, TSE supports additional unicast addresses.
-		Otherwise additional unicast addresses are not supported.
-- altr,has-hash-multicast-filter:
-		If present, TSE supports a hash based multicast filter.
-		Otherwise, hash-based multicast filtering is not supported.
-
-- mdio device tree subnode: When the TSE has a phy connected to its local
-		mdio, there must be device tree subnode with the following
-		required properties:
-
-	- compatible: Must be "altr,tse-mdio".
-	- #address-cells: Must be <1>.
-	- #size-cells: Must be <0>.
-
-	For each phy on the mdio bus, there must be a node with the following
-	fields:
-
-	- reg: phy id used to communicate to phy.
-	- device_type: Must be "ethernet-phy".
-
-The MAC address will be determined using the optional properties defined in
-ethernet.txt.
-
-Example:
-
-	tse_sub_0_eth_tse_0: ethernet@1,00000000 {
-		compatible = "altr,tse-msgdma-1.0";
-		reg =	<0x00000001 0x00000000 0x00000400>,
-			<0x00000001 0x00000460 0x00000020>,
-			<0x00000001 0x00000480 0x00000020>,
-			<0x00000001 0x000004A0 0x00000008>,
-			<0x00000001 0x00000400 0x00000020>,
-			<0x00000001 0x00000420 0x00000020>;
-		reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
-		interrupt-parent = <&hps_0_arm_gic_0>;
-		interrupts = <0 41 4>, <0 40 4>;
-		interrupt-names = "rx_irq", "tx_irq";
-		rx-fifo-depth = <2048>;
-		tx-fifo-depth = <2048>;
-		address-bits = <48>;
-		max-frame-size = <1500>;
-		local-mac-address = [ 00 00 00 00 00 00 ];
-		phy-mode = "gmii";
-		altr,has-supplementary-unicast;
-		altr,has-hash-multicast-filter;
-		phy-handle = <&phy0>;
-		mdio {
-			compatible = "altr,tse-mdio";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy0: ethernet-phy@0 {
-				reg = <0x0>;
-				device_type = "ethernet-phy";
-			};
-
-			phy1: ethernet-phy@1 {
-				reg = <0x1>;
-				device_type = "ethernet-phy";
-			};
-
-		};
-	};
-
-	tse_sub_1_eth_tse_0: ethernet@1,00001000 {
-		compatible = "altr,tse-msgdma-1.0";
-		reg = 	<0x00000001 0x00001000 0x00000400>,
-			<0x00000001 0x00001460 0x00000020>,
-			<0x00000001 0x00001480 0x00000020>,
-			<0x00000001 0x000014A0 0x00000008>,
-			<0x00000001 0x00001400 0x00000020>,
-			<0x00000001 0x00001420 0x00000020>;
-		reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
-		interrupt-parent = <&hps_0_arm_gic_0>;
-		interrupts = <0 43 4>, <0 42 4>;
-		interrupt-names = "rx_irq", "tx_irq";
-		rx-fifo-depth = <2048>;
-		tx-fifo-depth = <2048>;
-		address-bits = <48>;
-		max-frame-size = <1500>;
-		local-mac-address = [ 00 00 00 00 00 00 ];
-		phy-mode = "gmii";
-		altr,has-supplementary-unicast;
-		altr,has-hash-multicast-filter;
-		phy-handle = <&phy1>;
-	};
diff --git a/Documentation/devicetree/bindings/net/altr,tse.yaml b/Documentation/devicetree/bindings/net/altr,tse.yaml
new file mode 100644
index 000000000000..9d02af468906
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/altr,tse.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/altr,tse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera Triple Speed Ethernet MAC driver (TSE)
+
+maintainers:
+  - Maxime Chevallier <maxime.chevallier@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - const: altr,tse-1.0
+      - const: ALTR,tse-1.0
+        deprecated: true
+      - const: altr,tse-msgdma-1.0
+
+  interrupts:
+    minItems: 2
+
+  interrupt-names:
+    items:
+      - const: rx_irq
+      - const: tx_irq
+
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Depth in bytes of the RX FIFO
+
+  tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Depth in bytes of the TX FIFO
+
+  altr,has-supplementary-unicast:
+    type: boolean
+    description:
+      If present, TSE supports additional unicast addresses.
+
+  altr,has-hash-multicast-filter:
+    type: boolean
+    description:
+      If present, TSE supports hash based multicast filter.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description:
+      Creates and registers an MDIO bus.
+
+    properties:
+      compatible:
+        const: altr,tse-mdio
+
+    required:
+      - compatible
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - rx-fifo-depth
+  - tx-fifo-depth
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - const: altr,tse-1.0
+              - const: ALTR,tse-1.0
+    then:
+      properties:
+        reg:
+          minItems: 4
+        reg-names:
+          items:
+            - const: control_port
+            - const: rx_csr
+            - const: tx_csr
+            - const: s1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - altr,tse-msgdma-1.0
+    then:
+      properties:
+        reg:
+          minItems: 6
+          maxItems: 7
+        reg-names:
+          minItems: 6
+          items:
+            - const: control_port
+            - const: rx_csr
+            - const: rx_desc
+            - const: rx_resp
+            - const: tx_csr
+            - const: tx_desc
+            - const: pcs
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    tse_sub_0: ethernet@c0100000 {
+        compatible = "altr,tse-msgdma-1.0";
+        reg = <0xc0100000 0x00000400>,
+              <0xc0101000 0x00000020>,
+              <0xc0102000 0x00000020>,
+              <0xc0103000 0x00000008>,
+              <0xc0104000 0x00000020>,
+              <0xc0105000 0x00000020>,
+              <0xc0106000 0x00000100>;
+        reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc", "pcs";
+        interrupt-parent = <&intc>;
+        interrupts = <0 44 4>,<0 45 4>;
+        interrupt-names = "rx_irq","tx_irq";
+        rx-fifo-depth = <2048>;
+        tx-fifo-depth = <2048>;
+        max-frame-size = <1500>;
+        local-mac-address = [ 00 00 00 00 00 00 ];
+        altr,has-supplementary-unicast;
+        altr,has-hash-multicast-filter;
+        sfp = <&sfp0>;
+        phy-mode = "sgmii";
+        managed = "in-band-status";
+    };
+  - |
+    tse_sub_1_eth_tse_0: ethernet@1,00001000 {
+        compatible = "altr,tse-msgdma-1.0";
+        reg = <0x00001000 0x00000400>,
+              <0x00001460 0x00000020>,
+              <0x00001480 0x00000020>,
+              <0x000014A0 0x00000008>,
+              <0x00001400 0x00000020>,
+              <0x00001420 0x00000020>;
+        reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
+        interrupt-parent = <&hps_0_arm_gic_0>;
+        interrupts = <0 43 4>, <0 42 4>;
+        interrupt-names = "rx_irq", "tx_irq";
+        rx-fifo-depth = <2048>;
+        tx-fifo-depth = <2048>;
+        max-frame-size = <1500>;
+        local-mac-address = [ 00 00 00 00 00 00 ];
+        phy-mode = "gmii";
+        altr,has-supplementary-unicast;
+        altr,has-hash-multicast-filter;
+        phy-handle = <&phy1>;
+        mdio {
+            compatible = "altr,tse-mdio";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy1: ethernet-phy@1 {
+                reg = <0x1>;
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/amlogic,g12a-mdio-mux.yaml b/Documentation/devicetree/bindings/net/amlogic,g12a-mdio-mux.yaml
new file mode 100644
index 000000000000..ec5c038ce6a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/amlogic,g12a-mdio-mux.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/amlogic,g12a-mdio-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MDIO bus multiplexer/glue of Amlogic G12a SoC family
+
+description:
+  This is a special case of a MDIO bus multiplexer. It allows to choose between
+  the internal mdio bus leading to the embedded 10/100 PHY or the external
+  MDIO bus.
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: amlogic,g12a-mdio-mux
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: peripheral clock
+      - description: platform crytal
+      - description: SoC 50MHz MPLL
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: clkin0
+      - const: clkin1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    mdio-multiplexer@4c000 {
+        compatible = "amlogic,g12a-mdio-mux";
+        reg = <0x4c000 0xa4>;
+        clocks = <&clkc_eth_phy>, <&xtal>, <&clkc_mpll>;
+        clock-names = "pclk", "clkin0", "clkin1";
+        mdio-parent-bus = <&mdio0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+            reg = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+        };
+
+        mdio@1 {
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@8 {
+                compatible = "ethernet-phy-id0180.3301",
+                             "ethernet-phy-ieee802.3-c22";
+                interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+                reg = <8>;
+                max-speed = <100>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/amlogic,gxl-mdio-mux.yaml b/Documentation/devicetree/bindings/net/amlogic,gxl-mdio-mux.yaml
new file mode 100644
index 000000000000..27ae004dbea0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/amlogic,gxl-mdio-mux.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/amlogic,gxl-mdio-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic GXL MDIO bus multiplexer
+
+maintainers:
+  - Jerome Brunet <jbrunet@baylibre.com>
+
+description:
+  This is a special case of a MDIO bus multiplexer. It allows to choose between
+  the internal mdio bus leading to the embedded 10/100 PHY or the external
+  MDIO bus on the Amlogic GXL SoC family.
+
+allOf:
+  - $ref: mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: amlogic,gxl-mdio-mux
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ref
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    eth_phy_mux: mdio@558 {
+      compatible = "amlogic,gxl-mdio-mux";
+      reg = <0x558 0xc>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      clocks = <&refclk>;
+      clock-names = "ref";
+      mdio-parent-bus = <&mdio0>;
+
+      external_mdio: mdio@0 {
+        reg = <0x0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+
+      internal_mdio: mdio@1 {
+        reg = <0x1>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
index 608e1d62bed5..a2c51a84efa5 100644
--- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
@@ -2,13 +2,13 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/net/amlogic,meson-dwmac.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/amlogic,meson-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Amlogic Meson DWMAC Ethernet controller
 
 maintainers:
-  - Neil Armstrong <narmstrong@baylibre.com>
+  - Neil Armstrong <neil.armstrong@linaro.org>
   - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
 
 # We need a select here so we don't match all nodes with 'snps,dwmac'
diff --git a/Documentation/devicetree/bindings/net/asix,ax88178.yaml b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
new file mode 100644
index 000000000000..768504ccbf74
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/asix,ax88178.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/asix,ax88178.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASIX AX88172/AX88772 USB Ethernet Controllers
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  Device tree properties for hard wired USB Ethernet devices.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - usbb95,1720   # ASIX AX88172
+          - usbb95,172a   # ASIX AX88172A
+          - usbb95,1780   # ASIX AX88178
+          - usbb95,7720   # ASIX AX88772
+          - usbb95,772a   # ASIX AX88772A
+          - usbb95,772b   # ASIX AX88772B
+          - usbb95,7e2b   # ASIX AX88772B
+
+  reg:
+    maxItems: 1
+
+  local-mac-address: true
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+            compatible = "usbb95,7e2b";
+            reg = <1>;
+            local-mac-address = [00 00 00 00 00 00];
+        };
+    };
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb1@1 {
+            compatible = "usb1234,5678";
+            reg = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet@1 {
+               compatible = "usbb95,772b";
+               reg = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/asix,ax88796c.yaml b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml
new file mode 100644
index 000000000000..6b849a4349c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/asix,ax88796c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASIX AX88796C SPI Ethernet Adapter
+
+maintainers:
+  - Łukasz Stelmach <l.stelmach@samsung.com>
+
+description: |
+  ASIX AX88796C is an Ethernet controller with a built in PHY. This
+  describes SPI mode of the chip.
+
+  The node for this driver must be a child node of an SPI controller,
+  hence all mandatory properties described in
+  ../spi/spi-controller.yaml must be specified.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+
+properties:
+  compatible:
+    const: asix,ax88796c
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 40000000
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      A GPIO line handling reset of the chip. As the line is active low,
+      it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  controller-data: true
+  local-mac-address: true
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - interrupts
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  # Artik5 eval board
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@0 {
+            compatible = "asix,ax88796c";
+            reg = <0x0>;
+            local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
+            interrupt-parent = <&gpx2>;
+            interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+            spi-max-frequency = <40000000>;
+            reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
index 1c88820cbcdf..d6ef468495c5 100644
--- a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml
@@ -15,15 +15,19 @@ description: |+
   MAC.
 
 allOf:
-  - $ref: "mdio.yaml#"
+  - $ref: mdio.yaml#
 
 properties:
   compatible:
     const: aspeed,ast2600-mdio
+
   reg:
     maxItems: 1
     description: The register range of the MDIO controller instance
 
+  resets:
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -34,11 +38,13 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/ast2600-clock.h>
     mdio0: mdio@1e650000 {
             compatible = "aspeed,ast2600-mdio";
             reg = <0x1e650000 0x8>;
             #address-cells = <1>;
             #size-cells = <0>;
+            resets = <&syscon ASPEED_RESET_MII>;
 
             ethphy0: ethernet-phy@0 {
                     compatible = "ethernet-phy-ieee802.3-c22";
diff --git a/Documentation/devicetree/bindings/net/bluetooth.txt b/Documentation/devicetree/bindings/net/bluetooth.txt
deleted file mode 100644
index 94797df751b8..000000000000
--- a/Documentation/devicetree/bindings/net/bluetooth.txt
+++ /dev/null
@@ -1,5 +0,0 @@
-The following properties are common to the Bluetooth controllers:
-
-- local-bd-address: array of 6 bytes, specifies the BD address that was
-  uniquely assigned to the Bluetooth device, formatted with least significant
-  byte first (little-endian).
diff --git a/Documentation/devicetree/bindings/net/bluetooth/bluetooth-controller.yaml b/Documentation/devicetree/bindings/net/bluetooth/bluetooth-controller.yaml
new file mode 100644
index 000000000000..59bb0d7e8ab3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/bluetooth-controller.yaml
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/bluetooth-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bluetooth Controller Common Properties
+
+maintainers:
+  - Marcel Holtmann <marcel@holtmann.org>
+  - Johan Hedberg <johan.hedberg@gmail.com>
+  - Luiz Augusto von Dentz <luiz.dentz@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "^bluetooth(@.*)?$"
+
+  local-bd-address:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 6
+    description:
+      Specifies the BD address that was uniquely assigned to the Bluetooth
+      device. Formatted with least significant byte first (little-endian), e.g.
+      in order to assign the address 00:11:22:33:44:55 this property must have
+      the value [55 44 33 22 11 00].
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml
new file mode 100644
index 000000000000..37cb39a3a62e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/brcm,bcm4377-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4377 family PCIe Bluetooth Chips
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+description:
+  This binding describes Broadcom BCM4377 family PCIe-attached bluetooth chips
+  usually found in Apple machines. The Wi-Fi part of the chip is described in
+  bindings/net/wireless/brcm,bcm4329-fmac.yaml.
+
+allOf:
+  - $ref: bluetooth-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - pci14e4,5fa0 # BCM4377
+      - pci14e4,5f69 # BCM4378
+      - pci14e4,5f71 # BCM4387
+
+  reg:
+    maxItems: 1
+
+  brcm,board-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Board type of the Bluetooth chip. This is used to decouple
+      the overall system board from the Bluetooth module and used to construct
+      firmware and calibration data filenames.
+      On Apple platforms, this should be the Apple module-instance codename
+      prefixed by "apple,", e.g. "apple,atlantisb".
+    pattern: '^apple,.*'
+
+  brcm,taurus-cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: A per-device calibration blob for the Bluetooth radio. This
+      should be filled in by the bootloader from platform configuration
+      data, if necessary, and will be uploaded to the device.
+      This blob is used if the chip stepping of the Bluetooth module does not
+      support beamforming.
+
+  brcm,taurus-bf-cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: A per-device calibration blob for the Bluetooth radio. This
+      should be filled in by the bootloader from platform configuration
+      data, if necessary, and will be uploaded to the device.
+      This blob is used if the chip stepping of the Bluetooth module supports
+      beamforming.
+
+  local-bd-address: true
+
+required:
+  - compatible
+  - reg
+  - local-bd-address
+  - brcm,board-type
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie@a0000000 {
+      #address-cells = <3>;
+      #size-cells = <2>;
+      reg = <0xa0000000 0x1000000>;
+      device_type = "pci";
+      ranges = <0x43000000 0x6 0xa0000000 0xa0000000 0x0 0x20000000>;
+
+      bluetooth@0,1 {
+        compatible = "pci14e4,5f69";
+        reg = <0x100 0x0 0x0 0x0 0x0>;
+        brcm,board-type = "apple,honshu";
+        /* To be filled by the bootloader */
+        local-bd-address = [00 00 00 00 00 00];
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
new file mode 100644
index 000000000000..57e4c87cb00b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/nxp,88w8987-bt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Bluetooth chips
+
+description:
+  This binding describes UART-attached NXP bluetooth chips. These chips
+  are dual-radio chips supporting WiFi and Bluetooth. The bluetooth
+  works on standard H4 protocol over 4-wire UART. The RTS and CTS lines
+  are used during FW download. To enable power save mode, the host
+  asserts break signal over UART-TX line to put the chip into power save
+  state. De-asserting break wakes up the BT chip.
+
+maintainers:
+  - Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - nxp,88w8987-bt
+      - nxp,88w8997-bt
+
+  fw-init-baudrate:
+    description:
+      Chip baudrate after FW is downloaded and initialized.
+      This property depends on the module vendor's
+      configuration. If this property is not specified,
+      115200 is set as default.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+        bluetooth {
+            compatible = "nxp,88w8987-bt";
+            fw-init-baudrate = <3000000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
index f93c6e7a1b59..68f78b90d23a 100644
--- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml#
+$id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Qualcomm Bluetooth Chips
@@ -23,6 +23,7 @@ properties:
       - qcom,wcn3998-bt
       - qcom,qca6390-bt
       - qcom,wcn6750-bt
+      - qcom,wcn6855-bt
 
   enable-gpios:
     maxItems: 1
@@ -79,8 +80,7 @@ properties:
   firmware-name:
     description: specify the name of nvm firmware to load
 
-  local-bd-address:
-    description: see Documentation/devicetree/bindings/net/bluetooth.txt
+  local-bd-address: true
 
 
 required:
@@ -89,6 +89,7 @@ required:
 additionalProperties: false
 
 allOf:
+  - $ref: bluetooth-controller.yaml#
   - if:
       properties:
         compatible:
@@ -133,6 +134,22 @@ allOf:
         - vddrfa1p7-supply
         - vddrfa1p2-supply
         - vddasd-supply
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn6855-bt
+    then:
+      required:
+        - enable-gpios
+        - swctrl-gpios
+        - vddio-supply
+        - vddbtcxmx-supply
+        - vddrfacmn-supply
+        - vddrfa0p8-supply
+        - vddrfa1p2-supply
+        - vddrfa1p7-supply
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt
deleted file mode 100644
index 0120ebe93262..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,amac.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Broadcom AMAC Ethernet Controller Device Tree Bindings
--------------------------------------------------------------
-
-Required properties:
- - compatible:	"brcm,amac"
-		"brcm,nsp-amac"
-		"brcm,ns2-amac"
- - reg:		Address and length of the register set for the device. It
-		contains the information of registers in the same order as
-		described by reg-names
- - reg-names:	Names of the registers.
-		"amac_base":	Address and length of the GMAC registers
-		"idm_base":	Address and length of the GMAC IDM registers
-				(required for NSP and Northstar2)
-		"nicpm_base":	Address and length of the NIC Port Manager
-				registers (required for Northstar2)
- - interrupts:	Interrupt number
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt.
-
-Examples:
-
-amac0: ethernet@18022000 {
-	compatible = "brcm,nsp-amac";
-	reg = <0x18022000 0x1000>,
-	      <0x18110000 0x1000>;
-	reg-names = "amac_base", "idm_base";
-	interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.yaml b/Documentation/devicetree/bindings/net/brcm,amac.yaml
new file mode 100644
index 000000000000..210fb29c4e7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,amac.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,amac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom AMAC Ethernet Controller
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,amac
+    then:
+      properties:
+        reg:
+          maxItems: 2
+        reg-names:
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,nsp-amac
+    then:
+      properties:
+        reg:
+          minItems: 2
+          maxItems: 2
+        reg-names:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,ns2-amac
+    then:
+      properties:
+        reg:
+          minItems: 3
+        reg-names:
+          minItems: 3
+
+properties:
+  compatible:
+    enum:
+      - brcm,amac
+      - brcm,nsp-amac
+      - brcm,ns2-amac
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    minItems: 1
+    maxItems: 3
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: amac_base
+      - const: idm_base
+      - const: nicpm_base
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+   amac0: ethernet@18022000 {
+      compatible = "brcm,nsp-amac";
+      reg = <0x18022000 0x1000>,
+            <0x18110000 0x1000>;
+      reg-names = "amac_base", "idm_base";
+      interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+   };
diff --git a/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml b/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml
index 2f34fda55fd0..9ef28c2a0afc 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,bcm6368-mdio-mux.yaml
@@ -15,18 +15,12 @@ description:
   properties as well to generate desired MDIO transaction on appropriate bus.
 
 allOf:
-  - $ref: "mdio.yaml#"
+  - $ref: mdio-mux.yaml#
 
 properties:
   compatible:
     const: brcm,bcm6368-mdio-mux
 
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 0
-
   reg:
     maxItems: 1
 
@@ -34,24 +28,6 @@ required:
   - compatible
   - reg
 
-patternProperties:
-  '^mdio@[0-1]$':
-    type: object
-    properties:
-      reg:
-        maxItems: 1
-
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
-    required:
-      - reg
-      - "#address-cells"
-      - "#size-cells"
-
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
deleted file mode 100644
index 33a0d67e4ce5..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-* Broadcom BCM7xxx Ethernet Controller (GENET)
-
-Required properties:
-- compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2",
-  "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5", "brcm,bcm2711-genet-v5".
-- reg: address and length of the register set for the device
-- interrupts and/or interrupts-extended: must be two cells, the first cell
-  is the general purpose interrupt line, while the second cell is the
-  interrupt for the ring RX and TX queues operating in ring mode.  An
-  optional third interrupt cell for Wake-on-LAN can be specified.
-  See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-  for information on the property specifics.
-- phy-mode: see ethernet.txt file in the same directory
-- #address-cells: should be 1
-- #size-cells: should be 1
-
-Optional properties:
-- clocks: When provided, must be two phandles to the functional clocks nodes
-  of the GENET block. The first phandle is the main GENET clock used during
-  normal operation, while the second phandle is the Wake-on-LAN clock.
-- clock-names: When provided, names of the functional clock phandles, first
-  name should be "enet" and second should be "enet-wol".
-
-- phy-handle: See ethernet.txt file in the same directory; used to describe
-  configurations where a PHY (internal or external) is used.
-
-- fixed-link: When the GENET interface is connected to a MoCA hardware block or
-  when operating in a RGMII to RGMII type of connection, or when the MDIO bus is
-  voluntarily disabled, this property should be used to describe the "fixed link".
-  See Documentation/devicetree/bindings/net/fixed-link.txt for information on
-  the property specifics
-
-Required child nodes:
-
-- mdio bus node: this node should always be present regardless of the PHY
-  configuration of the GENET instance
-
-MDIO bus node required properties:
-
-- compatible: should contain one of "brcm,genet-mdio-v1", "brcm,genet-mdio-v2"
-  "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5", the version
-  has to match the parent node compatible property (e.g: brcm,genet-v4 pairs
-  with brcm,genet-mdio-v4)
-- reg: address and length relative to the parent node base register address
-- #address-cells: address cell for MDIO bus addressing, should be 1
-- #size-cells: size of the cells for MDIO bus addressing, should be 0
-
-Ethernet PHY node properties:
-
-See Documentation/devicetree/bindings/net/phy.txt for the list of required and
-optional properties.
-
-Internal Gigabit PHY example:
-
-ethernet@f0b60000 {
-	phy-mode = "internal";
-	phy-handle = <&phy1>;
-	mac-address = [ 00 10 18 36 23 1a ];
-	compatible = "brcm,genet-v4";
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	reg = <0xf0b60000 0xfc4c>;
-	interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>;
-
-	mdio@e14 {
-		compatible = "brcm,genet-mdio-v4";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		reg = <0xe14 0x8>;
-
-		phy1: ethernet-phy@1 {
-			max-speed = <1000>;
-			reg = <0x1>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
-
-MoCA interface / MAC to MAC example:
-
-ethernet@f0b80000 {
-	phy-mode = "moca";
-	fixed-link = <1 0 1000 0 0>;
-	mac-address = [ 00 10 18 36 24 1a ];
-	compatible = "brcm,genet-v4";
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	reg = <0xf0b80000 0xfc4c>;
-	interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>;
-
-	mdio@e14 {
-		compatible = "brcm,genet-mdio-v4";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		reg = <0xe14 0x8>;
-	};
-};
-
-
-External MDIO-connected Gigabit PHY/switch:
-
-ethernet@f0ba0000 {
-	phy-mode = "rgmii";
-	phy-handle = <&phy0>;
-	mac-address = [ 00 10 18 36 26 1a ];
-	compatible = "brcm,genet-v4";
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	reg = <0xf0ba0000 0xfc4c>;
-	interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
-
-	mdio@e14 {
-		compatible = "brcm,genet-mdio-v4";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		reg = <0xe14 0x8>;
-
-		phy0: ethernet-phy@0 {
-			max-speed = <1000>;
-			reg = <0x0>;
-			compatible = "ethernet-phy-ieee802.3-c22";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
new file mode 100644
index 000000000000..0e5e5db32faf
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,bcmgenet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7xxx Ethernet Controller (GENET)
+
+maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,genet-v1
+      - brcm,genet-v2
+      - brcm,genet-v3
+      - brcm,genet-v4
+      - brcm,genet-v5
+      - brcm,bcm2711-genet-v5
+      - brcm,bcm7712-genet-v5
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: general purpose interrupt line
+      - description: RX and TX rings interrupt line
+      - description: Wake-on-LAN interrupt line
+
+
+  clocks:
+    minItems: 1
+    items:
+      - description: main clock
+      - description: EEE clock
+      - description: Wake-on-LAN clock
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: enet
+      - const: enet-eee
+      - const: enet-wol
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "^mdio@[0-9a-f]+$":
+    type: object
+    $ref: "brcm,unimac-mdio.yaml"
+
+    description:
+      GENET internal UniMAC MDIO bus
+
+required:
+  - reg
+  - interrupts
+  - phy-mode
+  - "#address-cells"
+  - "#size-cells"
+
+allOf:
+  - $ref: ethernet-controller.yaml
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@f0b60000 {
+        phy-mode = "internal";
+        phy-handle = <&phy1>;
+        mac-address = [ 00 10 18 36 23 1a ];
+        compatible = "brcm,genet-v4";
+        reg = <0xf0b60000 0xfc4c>;
+        interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        mdio0: mdio@e14 {
+           compatible = "brcm,genet-mdio-v4";
+           #address-cells = <1>;
+           #size-cells = <0>;
+           reg = <0xe14 0x8>;
+
+           phy1: ethernet-phy@1 {
+                max-speed = <1000>;
+                reg = <1>;
+                compatible = "ethernet-phy-ieee802.3-c22";
+           };
+        };
+    };
+
+  - |
+    ethernet@f0b80000 {
+        phy-mode = "moca";
+        fixed-link = <1 0 1000 0 0>;
+        mac-address = [ 00 10 18 36 24 1a ];
+        compatible = "brcm,genet-v4";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0xf0b80000 0xfc4c>;
+        interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>;
+
+        mdio1: mdio@e14 {
+           compatible = "brcm,genet-mdio-v4";
+           #address-cells = <1>;
+           #size-cells = <0>;
+           reg = <0xe14 0x8>;
+        };
+    };
+
+  - |
+    ethernet@f0ba0000 {
+        phy-mode = "rgmii";
+        phy-handle = <&phy0>;
+        mac-address = [ 00 10 18 36 26 1a ];
+        compatible = "brcm,genet-v4";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        reg = <0xf0ba0000 0xfc4c>;
+        interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>;
+
+        mdio2: mdio@e14 {
+           compatible = "brcm,genet-mdio-v4";
+           #address-cells = <1>;
+           #size-cells = <0>;
+           reg = <0xe14 0x8>;
+
+           phy0: ethernet-phy@0 {
+                max-speed = <1000>;
+                reg = <0>;
+                compatible = "ethernet-phy-ieee802.3-c22";
+           };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
deleted file mode 100644
index deb9e852ea27..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-Properties for an MDIO bus multiplexer found in Broadcom iProc based SoCs.
-
-This MDIO bus multiplexer defines buses that could be internal as well as
-external to SoCs and could accept MDIO transaction compatible to C-22 or
-C-45 Clause. When child bus is selected, one needs to select these two
-properties as well to generate desired MDIO transaction on appropriate bus.
-
-Required properties in addition to the generic multiplexer properties:
-
-MDIO multiplexer node:
-- compatible: brcm,mdio-mux-iproc.
-
-Every non-ethernet PHY requires a compatible so that it could be probed based
-on this compatible string.
-
-Optional properties:
-- clocks: phandle of the core clock which drives the mdio block.
-
-Additional information regarding generic multiplexer properties can be found
-at- Documentation/devicetree/bindings/net/mdio-mux.yaml
-
-
-for example:
-		mdio_mux_iproc: mdio-mux@66020000 {
-			compatible = "brcm,mdio-mux-iproc";
-			reg = <0x66020000 0x250>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			mdio@0 {
-				reg = <0x0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pci_phy0: pci-phy@0 {
-					compatible = "brcm,ns2-pcie-phy";
-					reg = <0x0>;
-					#phy-cells = <0>;
-				};
-			};
-
-			mdio@7 {
-				reg = <0x7>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				pci_phy1: pci-phy@0 {
-					compatible = "brcm,ns2-pcie-phy";
-					reg = <0x0>;
-					#phy-cells = <0>;
-				};
-			};
-			mdio@10 {
-				reg = <0x10>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				gphy0: eth-phy@10 {
-					reg = <0x10>;
-				};
-			};
-		};
diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
new file mode 100644
index 000000000000..af96b4fd89d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,mdio-mux-iproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MDIO bus multiplexer found in Broadcom iProc based SoCs.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description:
+  This MDIO bus multiplexer defines buses that could be internal as well as
+  external to SoCs and could accept MDIO transaction compatible to C-22 or
+  C-45 Clause. When child bus is selected, one needs to select these two
+  properties as well to generate desired MDIO transaction on appropriate bus.
+
+allOf:
+  - $ref: /schemas/net/mdio-mux.yaml#
+
+properties:
+  compatible:
+    const: brcm,mdio-mux-iproc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: core clock driving the MDIO block
+
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio_mux_iproc: mdio-mux@66020000 {
+        compatible = "brcm,mdio-mux-iproc";
+        reg = <0x66020000 0x250>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio@0 {
+           reg = <0x0>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           pci_phy0: pci-phy@0 {
+              compatible = "brcm,ns2-pcie-phy";
+              reg = <0x0>;
+              #phy-cells = <0>;
+           };
+        };
+
+        mdio@7 {
+           reg = <0x7>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           pci_phy1: pci-phy@0 {
+              compatible = "brcm,ns2-pcie-phy";
+              reg = <0x0>;
+              #phy-cells = <0>;
+           };
+        };
+
+        mdio@10 {
+           reg = <0x10>;
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           gphy0: eth-phy@10 {
+              reg = <0x10>;
+           };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.txt b/Documentation/devicetree/bindings/net/brcm,systemport.txt
deleted file mode 100644
index 75736739bfdd..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,systemport.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
-
-Required properties:
-- compatible: should be one of:
-	      "brcm,systemport-v1.00"
-	      "brcm,systemportlite-v1.00" or
-	      "brcm,systemport"
-- reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the rx
-  interrupts, and the second cell should be for the transmit queues. An
-  optional third interrupt cell for Wake-on-LAN can be specified
-- local-mac-address: Ethernet MAC address (48 bits) of this adapter
-- phy-mode: Should be a string describing the PHY interface to the
-  Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt
-- fixed-link: see Documentation/devicetree/bindings/net/fixed-link.txt for
-  the property specific details
-
-Optional properties:
-- systemport,num-tier2-arb: number of tier 2 arbiters, an integer
-- systemport,num-tier1-arb: number of tier 1 arbiters, an integer
-- systemport,num-txq: number of HW transmit queues, an integer
-- systemport,num-rxq: number of HW receive queues, an integer
-- clocks: When provided, must be two phandles to the functional clocks nodes of
-  the SYSTEMPORT block. The first phandle is the main SYSTEMPORT clock used
-  during normal operation, while the second phandle is the Wake-on-LAN clock.
-- clock-names: When provided, names of the functional clock phandles, first
-  name should be "sw_sysport" and second should be "sw_sysportwol".
-
-Example:
-ethernet@f04a0000 {
-	compatible = "brcm,systemport-v1.00";
-	reg = <0xf04a0000 0x4650>;
-	local-mac-address = [ 00 11 22 33 44 55 ];
-	fixed-link = <0 1 1000 0 0>;
-	phy-mode = "gmii";
-	interrupts = <0x0 0x16 0x0>,
-		<0x0 0x17 0x0>;
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,systemport.yaml b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
new file mode 100644
index 000000000000..b40006d44791
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,systemport.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,systemport.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM7xxx Ethernet Systemport Controller (SYSTEMPORT)
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - brcm,systemport-v1.00
+      - brcm,systemportlite-v1.00
+      - brcm,systemport
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    items:
+      - description: interrupt line for RX queues
+      - description: interrupt line for TX queues
+      - description: interrupt line for Wake-on-LAN
+
+  clocks:
+    items:
+      - description: main clock
+      - description: Wake-on-LAN clock
+
+  clock-names:
+    items:
+      - const: sw_sysport
+      - const: sw_sysportwol
+
+  systemport,num-tier2-arb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of tier 2 arbiters
+
+  systemport,num-tier1-arb:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of tier 2 arbiters
+
+  systemport,num-txq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description:
+      Number of HW transmit queues
+
+  systemport,num-rxq:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 32
+    description:
+      Number of HW receive queues
+
+required:
+  - reg
+  - interrupts
+  - phy-mode
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@f04a0000 {
+        compatible = "brcm,systemport-v1.00";
+        reg = <0xf04a0000 0x4650>;
+        local-mac-address = [ 00 11 22 33 44 55 ];
+        phy-mode = "gmii";
+        interrupts = <0x0 0x16 0x0>,
+                     <0x0 0x17 0x0>;
+        fixed-link {
+            speed = <1000>;
+            full-duplex;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
index f4f4c37f1d4e..0be426ee1e44 100644
--- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
@@ -7,6 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Broadcom UniMAC MDIO bus controller
 
 maintainers:
+  - Doug Berger <opendmb@gmail.com>
+  - Florian Fainelli <f.fainelli@gmail.com>
   - Rafał Miłecki <rafal@milecki.pl>
 
 allOf:
@@ -64,7 +66,6 @@ unevaluatedProperties: false
 
 required:
   - reg
-  - reg-names
   - '#address-cells'
   - '#size-cells'
 
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
index fbdc2083bec4..cc70b00c6ce5 100644
--- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml
@@ -19,10 +19,15 @@ properties:
       - brcm,bcm4329-bt
       - brcm,bcm4330-bt
       - brcm,bcm4334-bt
+      - brcm,bcm43430a0-bt
+      - brcm,bcm43430a1-bt
       - brcm,bcm43438-bt
       - brcm,bcm4345c5
       - brcm,bcm43540-bt
       - brcm,bcm4335a0
+      - brcm,bcm4349-bt
+      - cypress,cyw4373a0-bt
+      - infineon,cyw55572-bt
 
   shutdown-gpios:
     maxItems: 1
@@ -50,16 +55,29 @@ properties:
       by interrupts and "host-wakeup" interrupt-names
 
   clocks:
+    minItems: 1
     maxItems: 2
     description: 1 or 2 clocks as defined in clock-names below,
       in that order
 
   clock-names:
     description: Names of the 1 to 2 supplied clocks
-    items:
+    oneOf:
+      - const: extclk
+        deprecated: true
+        description: Deprecated in favor of txco
+
       - const: txco
+        description: >
+          external reference clock (not a standalone crystal)
+
       - const: lpo
-      - const: extclk
+        description: >
+          external low power 32.768 kHz clock
+
+      - items:
+          - const: txco
+          - const: lpo
 
   vbat-supply:
     description: phandle to regulator supply for VBAT
@@ -79,6 +97,13 @@ properties:
        pcm-sync-mode: slave, master
        pcm-clock-mode: slave, master
 
+  brcm,requires-autobaud-mode:
+    type: boolean
+    description:
+      Set this property if autobaud mode is required. Autobaud mode is required
+      if the device's initial baud rate in normal mode is not supported by the
+      host or if the device requires autobaud mode startup before loading FW.
+
   interrupts:
     items:
       - description: Handle to the line HOST_WAKE used to wake
@@ -95,6 +120,22 @@ properties:
 required:
   - compatible
 
+dependencies:
+  brcm,requires-autobaud-mode: [ shutdown-gpios ]
+
+if:
+  not:
+    properties:
+      compatible:
+        contains:
+          enum:
+            - brcm,bcm20702a1
+            - brcm,bcm4329-bt
+            - brcm,bcm4330-bt
+then:
+  properties:
+    reset-gpios: false
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
index a95960ee3feb..9c494957a07a 100644
--- a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
+++ b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
@@ -4,12 +4,15 @@
 $id: http://devicetree.org/schemas/net/can/allwinner,sun4i-a10-can.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 CAN Controller Device Tree Bindings
+title: Allwinner A10 CAN Controller
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
+allOf:
+  - $ref: can-controller.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -17,6 +20,7 @@ properties:
           - const: allwinner,sun7i-a20-can
           - const: allwinner,sun4i-a10-can
       - const: allwinner,sun4i-a10-can
+      - const: allwinner,sun8i-r40-can
 
   reg:
     maxItems: 1
@@ -27,6 +31,19 @@ properties:
   clocks:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun8i-r40-can
+
+then:
+  required:
+    - resets
+
 required:
   - compatible
   - reg
@@ -47,5 +64,15 @@ examples:
         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&ccu CLK_APB1_CAN>;
     };
+  - |
+    #define RST_BUS_CAN		68
+    #define CLK_BUS_CAN		91
+    can1: can@1c2bc00 {
+        compatible = "allwinner,sun8i-r40-can";
+        reg = <0x01c2bc00 0x400>;
+        interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CAN>;
+        resets = <&ccu RST_BUS_CAN>;
+    };
 
 ...
diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
index 2cd145a642f1..4d7d67ee175a 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/can/bosch,c_can.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bosch C_CAN/D_CAN controller Device Tree Bindings
+title: Bosch C_CAN/D_CAN controller
 
 description: Bosch C_CAN/D_CAN controller for CAN bus
 
@@ -56,10 +56,10 @@ properties:
       offset).
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      items:
-        - description: The phandle to the system control region.
-        - description: The register offset.
-        - description: The CAN instance number.
+      - items:
+          - description: The phandle to the system control region.
+          - description: The register offset.
+          - description: The CAN instance number.
 
   resets:
     maxItems: 1
@@ -80,8 +80,6 @@ if:
 then:
   properties:
     interrupts:
-      minItems: 4
-      maxItems: 4
       items:
         - description: Error and status IRQ
         - description: Message object IRQ
@@ -91,7 +89,6 @@ then:
 else:
   properties:
     interrupts:
-      maxItems: 1
       items:
         - description: Error and status IRQ
 
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
index fb547e26c676..67879aab623b 100644
--- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
+++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml
@@ -4,12 +4,15 @@
 $id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bosch MCAN controller Bindings
+title: Bosch MCAN controller
 
 description: Bosch MCAN controller for CAN bus
 
 maintainers:
-  - Sriram Dash <sriram.dash@samsung.com>
+  - Chandrasekar Ramakrishnan <rcsekar@samsung.com>
+
+allOf:
+  - $ref: can-controller.yaml#
 
 properties:
   compatible:
@@ -66,8 +69,8 @@ properties:
       M_CAN includes the following elements according to user manual:
       11-bit Filter	0-128 elements / 0-128 words
       29-bit Filter	0-64 elements / 0-128 words
-      Rx FIFO 0	0-64 elements / 0-1152 words
-      Rx FIFO 1	0-64 elements / 0-1152 words
+      Rx FIFO 0		0-64 elements / 0-1152 words
+      Rx FIFO 1		0-64 elements / 0-1152 words
       Rx Buffers	0-64 elements / 0-1152 words
       Tx Event FIFO	0-32 elements / 0-64 words
       Tx Buffers	0-32 elements / 0-576 words
@@ -76,33 +79,32 @@ properties:
       M_CAN user manual for details.
     $ref: /schemas/types.yaml#/definitions/int32-array
     items:
-      items:
-        - description: The 'offset' is an address offset of the Message RAM where
-            the following elements start from. This is usually set to 0x0 if
-            you're using a private Message RAM.
-          default: 0
-        - description: 11-bit Filter 0-128 elements / 0-128 words
-          minimum: 0
-          maximum: 128
-        - description: 29-bit Filter 0-64 elements / 0-128 words
-          minimum: 0
-          maximum: 64
-        - description: Rx FIFO 0 0-64 elements / 0-1152 words
-          minimum: 0
-          maximum: 64
-        - description: Rx FIFO 1 0-64 elements / 0-1152 words
-          minimum: 0
-          maximum: 64
-        - description: Rx Buffers 0-64 elements / 0-1152 words
-          minimum: 0
-          maximum: 64
-        - description: Tx Event FIFO 0-32 elements / 0-64 words
-          minimum: 0
-          maximum: 32
-        - description: Tx Buffers 0-32 elements / 0-576 words
-          minimum: 0
-          maximum: 32
-    maxItems: 1
+      - description: The 'offset' is an address offset of the Message RAM where
+          the following elements start from. This is usually set to 0x0 if
+          you're using a private Message RAM.
+        default: 0
+      - description: 11-bit Filter 0-128 elements / 0-128 words
+        minimum: 0
+        maximum: 128
+      - description: 29-bit Filter 0-64 elements / 0-128 words
+        minimum: 0
+        maximum: 64
+      - description: Rx FIFO 0 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Rx FIFO 1 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Rx Buffers 0-64 elements / 0-1152 words
+        minimum: 0
+        maximum: 64
+      - description: Tx Event FIFO 0-32 elements / 0-64 words
+        minimum: 0
+        maximum: 32
+      - description: Tx Buffers 0-32 elements / 0-576 words
+        minimum: 0
+        maximum: 32
+    minItems: 1
 
   power-domains:
     description:
diff --git a/Documentation/devicetree/bindings/net/can/can-controller.yaml b/Documentation/devicetree/bindings/net/can/can-controller.yaml
index 1f0e98051074..217be90960e8 100644
--- a/Documentation/devicetree/bindings/net/can/can-controller.yaml
+++ b/Documentation/devicetree/bindings/net/can/can-controller.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/can/can-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: CAN Controller Generic Binding
+title: CAN Controller Common Properties
 
 maintainers:
   - Marc Kleine-Budde <mkl@pengutronix.de>
diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
index d1ef1fe6ab29..d422b3921ffa 100644
--- a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
+++ b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/can/can-transceiver.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: CAN transceiver Bindings
+title: CAN transceiver
 
 description: CAN transceiver generic properties bindings
 
diff --git a/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml
new file mode 100644
index 000000000000..a009a4402938
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/ctu,ctucanfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CTU CAN FD Open-source IP Core
+
+description: |
+  Open-source CAN FD IP core developed at the Czech Technical University in Prague
+
+  The core sources and documentation on project page
+    [1] sources : https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core
+    [2] datasheet : https://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/doc/Datasheet.pdf
+
+  Integration in Xilinx Zynq SoC based system together with
+  OpenCores SJA1000 compatible controllers
+    [3] project : https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top
+  Martin Jerabek dimploma thesis with integration and testing
+  framework description
+    [4] PDF : https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf
+
+maintainers:
+  - Pavel Pisa <pisa@cmp.felk.cvut.cz>
+  - Ondrej Ille <ondrej.ille@gmail.com>
+  - Martin Jerabek <martin.jerabek01@gmail.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: ctu,ctucanfd-2
+          - const: ctu,ctucanfd
+      - const: ctu,ctucanfd
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description: |
+      phandle of reference clock (100 MHz is appropriate
+      for FPGA implementation on Zynq-7000 system).
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    ctu_can_fd_0: can@43c30000 {
+      compatible = "ctu,ctucanfd";
+      interrupts = <0 30 4>;
+      clocks = <&clkc 15>;
+      reg = <0x43c30000 0x10000>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
index 3f0ee17c1461..4162469c3c08 100644
--- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
+++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - fsl,imx93-flexcan
           - fsl,imx8qm-flexcan
           - fsl,imx8mp-flexcan
           - fsl,imx6q-flexcan
@@ -62,6 +63,9 @@ properties:
       boot loader. This property should only be used the used operating system
       doesn't support the clocks and clock-names property.
 
+  power-domains:
+    maxItems: 1
+
   xceiver-supply:
     description: Regulator that powers the CAN transceiver.
 
@@ -84,12 +88,12 @@ properties:
       req_bit is the bit offset of CAN stop request.
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
-      items:
-        - description: The 'gpr' is the phandle to general purpose register node.
-        - description: The 'req_gpr' is the gpr register offset of CAN stop request.
-          maximum: 0xff
-        - description: The 'req_bit' is the bit offset of CAN stop request.
-          maximum: 0x1f
+      - items:
+          - description: The 'gpr' is the phandle to general purpose register node.
+          - description: The 'req_gpr' is the gpr register offset of CAN stop request.
+            maximum: 0xff
+          - description: The 'req_bit' is the bit offset of CAN stop request.
+            maximum: 0x1f
 
   fsl,clk-source:
     description: |
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
index 2a884c1fe0e0..2a98b26630cb 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
@@ -4,23 +4,25 @@
 $id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title:
-  Microchip MCP2517FD and MCP2518FD stand-alone CAN controller device tree
-  bindings
+title: Microchip MCP2517FD, MCP2518FD and MCP251863 stand-alone CAN controller
 
 maintainers:
   - Marc Kleine-Budde <mkl@pengutronix.de>
 
+allOf:
+  - $ref: can-controller.yaml#
+
 properties:
   compatible:
     oneOf:
-      - const: microchip,mcp2517fd
-        description: for MCP2517FD
-      - const: microchip,mcp2518fd
-        description: for MCP2518FD
-      - const: microchip,mcp251xfd
-        description: to autodetect chip variant
-
+      - enum:
+          - microchip,mcp2517fd
+          - microchip,mcp2518fd
+          - microchip,mcp251xfd
+      - items:
+          - enum:
+              - microchip,mcp251863
+          - const: microchip,mcp2518fd
   reg:
     maxItems: 1
 
@@ -60,7 +62,7 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
new file mode 100644
index 000000000000..45aa3de7cf01
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/microchip,mpfs-can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Microchip PolarFire SoC (MPFS) can controller
+
+maintainers:
+  - Conor Dooley <conor.dooley@microchip.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    const: microchip,mpfs-can
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    can@2010c000 {
+        compatible = "microchip,mpfs-can";
+        reg = <0x2010c000 0x1000>;
+        clocks = <&clkcfg 17>;
+        interrupt-parent = <&plic>;
+        interrupts = <56>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
new file mode 100644
index 000000000000..144a3785132c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/nxp,sja1000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
+
+maintainers:
+  - Wolfgang Grandegger <wg@grandegger.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - nxp,sja1000
+          - technologic,sja1000
+      - items:
+          - enum:
+              - renesas,r9a06g032-sja1000 # RZ/N1D
+              - renesas,r9a06g033-sja1000 # RZ/N1S
+          - const: renesas,rzn1-sja1000 # RZ/N1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg-io-width:
+    description: I/O register width (in bytes) implemented by this device
+    default: 1
+    enum: [ 1, 2, 4 ]
+
+  nxp,external-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 16000000
+    description: |
+      Frequency of the external oscillator clock in Hz.
+      The internal clock frequency used by the SJA1000 is half of that value.
+
+  nxp,tx-output-mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1, 2, 3 ]
+    default: 1
+    description: |
+      operation mode of the TX output control logic. Valid values are:
+        <0> : bi-phase output mode
+        <1> : normal output mode (default)
+        <2> : test output mode
+        <3> : clock output mode
+
+  nxp,tx-output-config:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0x02
+    description: |
+      TX output pin configuration. Valid values are any one of the below
+      or combination of TX0 and TX1:
+        <0x01> : TX0 invert
+        <0x02> : TX0 pull-down (default)
+        <0x04> : TX0 pull-up
+        <0x06> : TX0 push-pull
+        <0x08> : TX1 invert
+        <0x10> : TX1 pull-down
+        <0x20> : TX1 pull-up
+        <0x30> : TX1 push-pull
+
+  nxp,clock-out-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      clock frequency in Hz on the CLKOUT pin.
+      If not specified or if the specified value is 0, the CLKOUT pin
+      will be disabled.
+
+  nxp,no-comparator-bypass:
+    type: boolean
+    description: Allows to disable the CAN input comparator.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: can-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - technologic,sja1000
+              - renesas,rzn1-sja1000
+    then:
+      required:
+        - reg-io-width
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,rzn1-sja1000
+    then:
+      required:
+        - clocks
+        - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    can@1a000 {
+        compatible = "technologic,sja1000";
+        reg = <0x1a000 0x100>;
+        interrupts = <1>;
+        reg-io-width = <2>;
+        nxp,tx-output-config = <0x06>;
+        nxp,external-clock-frequency = <24000000>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    can@52104000 {
+        compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000";
+        reg = <0x52104000 0x800>;
+        reg-io-width = <4>;
+        interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&sysctrl R9A06G032_HCLK_CAN0>;
+        power-domains = <&sysctrl>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
index 546c6e6d2fb0..d3f45d29fa0a 100644
--- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
+++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
@@ -9,9 +9,6 @@ title: Renesas R-Car CAN FD Controller
 maintainers:
   - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
 
-allOf:
-  - $ref: can-controller.yaml#
-
 properties:
   compatible:
     oneOf:
@@ -23,6 +20,7 @@ properties:
               - renesas,r8a774e1-canfd     # RZ/G2H
               - renesas,r8a7795-canfd      # R-Car H3
               - renesas,r8a7796-canfd      # R-Car M3-W
+              - renesas,r8a77961-canfd     # R-Car M3-W+
               - renesas,r8a77965-canfd     # R-Car M3-N
               - renesas,r8a77970-canfd     # R-Car V3M
               - renesas,r8a77980-canfd     # R-Car V3H
@@ -32,7 +30,15 @@ properties:
 
       - items:
           - enum:
+              - renesas,r8a779a0-canfd     # R-Car V3U
+              - renesas,r8a779g0-canfd     # R-Car V4H
+          - const: renesas,rcar-gen4-canfd # R-Car Gen4
+
+      - items:
+          - enum:
+              - renesas,r9a07g043-canfd    # RZ/G2UL and RZ/Five
               - renesas,r9a07g044-canfd    # RZ/G2{L,LC}
+              - renesas,r9a07g054-canfd    # RZ/V2L
           - const: renesas,rzg2l-canfd     # RZ/G2L family
 
   reg:
@@ -58,7 +64,7 @@ properties:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
       The controller can operate in either CAN FD only mode (default) or
-      Classical CAN only mode.  The mode is global to both the channels.
+      Classical CAN only mode.  The mode is global to all channels.
       Specify this property to put the controller in Classical CAN only mode.
 
   assigned-clocks:
@@ -72,17 +78,23 @@ properties:
     description: Maximum frequency of the CANFD clock.
 
 patternProperties:
-  "^channel[01]$":
+  "^channel[0-7]$":
     type: object
     description:
-      The controller supports two channels and each is represented as a child
-      node.  Each child node supports the "status" property only, which
-      is used to enable/disable the respective channel.
+      The controller supports multiple channels and each is represented as a
+      child node.  Each channel can be enabled/disabled individually.
+
+    properties:
+      phys:
+        maxItems: 1
+
+    additionalProperties: false
 
 required:
   - compatible
   - reg
   - interrupts
+  - interrupt-names
   - clocks
   - clock-names
   - power-domains
@@ -92,61 +104,73 @@ required:
   - channel0
   - channel1
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - renesas,rzg2l-canfd
-then:
-  properties:
-    interrupts:
-      items:
-        - description: CAN global error interrupt
-        - description: CAN receive FIFO interrupt
-        - description: CAN0 error interrupt
-        - description: CAN0 transmit interrupt
-        - description: CAN0 transmit/receive FIFO receive completion interrupt
-        - description: CAN1 error interrupt
-        - description: CAN1 transmit interrupt
-        - description: CAN1 transmit/receive FIFO receive completion interrupt
-
-    interrupt-names:
-      items:
-        - const: g_err
-        - const: g_recc
-        - const: ch0_err
-        - const: ch0_rec
-        - const: ch0_trx
-        - const: ch1_err
-        - const: ch1_rec
-        - const: ch1_trx
-
-    resets:
-      maxItems: 2
-
-    reset-names:
-      items:
-        - const: rstp_n
-        - const: rstc_n
-
-  required:
-    - interrupt-names
-    - reset-names
-else:
-  properties:
-    interrupts:
-      items:
-        - description: Channel interrupt
-        - description: Global interrupt
-
-    interrupt-names:
-      items:
-        - const: ch_int
-        - const: g_int
-
-    resets:
-      maxItems: 1
+allOf:
+  - $ref: can-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,rzg2l-canfd
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: CAN global error interrupt
+            - description: CAN receive FIFO interrupt
+            - description: CAN0 error interrupt
+            - description: CAN0 transmit interrupt
+            - description: CAN0 transmit/receive FIFO receive completion interrupt
+            - description: CAN1 error interrupt
+            - description: CAN1 transmit interrupt
+            - description: CAN1 transmit/receive FIFO receive completion interrupt
+
+        interrupt-names:
+          items:
+            - const: g_err
+            - const: g_recc
+            - const: ch0_err
+            - const: ch0_rec
+            - const: ch0_trx
+            - const: ch1_err
+            - const: ch1_rec
+            - const: ch1_trx
+
+        resets:
+          maxItems: 2
+
+        reset-names:
+          items:
+            - const: rstp_n
+            - const: rstc_n
+
+      required:
+        - reset-names
+    else:
+      properties:
+        interrupts:
+          items:
+            - description: Channel interrupt
+            - description: Global interrupt
+
+        interrupt-names:
+          items:
+            - const: ch_int
+            - const: g_int
+
+        resets:
+          maxItems: 1
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: renesas,rcar-gen4-canfd
+    then:
+      patternProperties:
+        "^channel[2-7]$": false
 
 unevaluatedProperties: false
 
@@ -162,6 +186,7 @@ examples:
             reg = <0xe66c0000 0x8000>;
             interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "ch_int", "g_int";
             clocks = <&cpg CPG_MOD 914>,
                      <&cpg CPG_CORE R8A7795_CLK_CANFD>,
                      <&can_clk>;
diff --git a/Documentation/devicetree/bindings/net/can/sja1000.txt b/Documentation/devicetree/bindings/net/can/sja1000.txt
deleted file mode 100644
index ac3160eca96a..000000000000
--- a/Documentation/devicetree/bindings/net/can/sja1000.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Memory mapped SJA1000 CAN controller from NXP (formerly Philips)
-
-Required properties:
-
-- compatible : should be one of "nxp,sja1000", "technologic,sja1000".
-
-- reg : should specify the chip select, address offset and size required
-	to map the registers of the SJA1000. The size is usually 0x80.
-
-- interrupts: property with a value describing the interrupt source
-	(number and sensitivity) required for the SJA1000.
-
-Optional properties:
-
-- reg-io-width : Specify the size (in bytes) of the IO accesses that
-	should be performed on the device.  Valid value is 1, 2 or 4.
-	This property is ignored for technologic version.
-	Default to 1 (8 bits).
-
-- nxp,external-clock-frequency : Frequency of the external oscillator
-	clock in Hz. Note that the internal clock frequency used by the
-	SJA1000 is half of that value. If not specified, a default value
-	of 16000000 (16 MHz) is used.
-
-- nxp,tx-output-mode : operation mode of the TX output control logic:
-	<0x0> : bi-phase output mode
-	<0x1> : normal output mode (default)
-	<0x2> : test output mode
-	<0x3> : clock output mode
-
-- nxp,tx-output-config : TX output pin configuration:
-	<0x01> : TX0 invert
-	<0x02> : TX0 pull-down (default)
-	<0x04> : TX0 pull-up
-	<0x06> : TX0 push-pull
-	<0x08> : TX1 invert
-	<0x10> : TX1 pull-down
-	<0x20> : TX1 pull-up
-	<0x30> : TX1 push-pull
-
-- nxp,clock-out-frequency : clock frequency in Hz on the CLKOUT pin.
-	If not specified or if the specified value is 0, the CLKOUT pin
-	will be disabled.
-
-- nxp,no-comparator-bypass : Allows to disable the CAN input comparator.
-
-For further information, please have a look to the SJA1000 data sheet.
-
-Examples:
-
-can@3,100 {
-	compatible = "nxp,sja1000";
-	reg = <3 0x100 0x80>;
-	interrupts = <2 0>;
-	interrupt-parent = <&mpic>;
-	nxp,external-clock-frequency = <16000000>;
-};
-
diff --git a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
new file mode 100644
index 000000000000..769fa5c27b76
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/st,stm32-bxcan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics bxCAN controller
+
+description: STMicroelectronics BxCAN controller for CAN bus
+
+maintainers:
+  - Dario Binacchi <dario.binacchi@amarulasolutions.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-bxcan
+
+  st,can-primary:
+    description:
+      Primary and secondary mode of the bxCAN peripheral is only relevant
+      if the chip has two CAN peripherals. In that case they share some
+      of the required logic.
+      To avoid misunderstandings, it should be noted that ST documentation
+      uses the terms master/slave instead of primary/secondary.
+    type: boolean
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: transmit interrupt
+      - description: FIFO 0 receive interrupt
+      - description: FIFO 1 receive interrupt
+      - description: status change error interrupt
+
+  interrupt-names:
+    items:
+      - const: tx
+      - const: rx0
+      - const: rx1
+      - const: sce
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  st,gcan:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      The phandle to the gcan node which allows to access the 512-bytes
+      SRAM memory shared by the two bxCAN cells (CAN1 primary and CAN2
+      secondary) in dual CAN peripheral configuration.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - clocks
+  - st,gcan
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32fx-clock.h>
+    #include <dt-bindings/mfd/stm32f4-rcc.h>
+
+    can1: can@40006400 {
+        compatible = "st,stm32f4-bxcan";
+        reg = <0x40006400 0x200>;
+        interrupts = <19>, <20>, <21>, <22>;
+        interrupt-names = "tx", "rx0", "rx1", "sce";
+        resets = <&rcc STM32F4_APB1_RESET(CAN1)>;
+        clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN1)>;
+        st,can-primary;
+        st,gcan = <&gcan>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
index 0968b40aef1e..e3501bfa22e9 100644
--- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt
@@ -31,7 +31,7 @@ tcan4x5x: tcan4x5x@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <10000000>;
-		bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+		bosch,mram-cfg = <0x0 0 0 16 0 0 1 1>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
new file mode 100644
index 000000000000..897d2cbda45b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/xilinx,can.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title:
+  Xilinx Axi CAN/Zynq CANPS controller
+
+maintainers:
+  - Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
+
+properties:
+  compatible:
+    enum:
+      - xlnx,zynq-can-1.0
+      - xlnx,axi-can-1.00.a
+      - xlnx,canfd-1.0
+      - xlnx,canfd-2.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    maxItems: 2
+
+  power-domains:
+    maxItems: 1
+
+  tx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: CAN Tx fifo depth (Zynq, Axi CAN).
+
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: CAN Rx fifo depth (Zynq, Axi CAN, CAN FD in sequential Rx mode)
+
+  tx-mailbox-count:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: CAN Tx mailbox buffer count (CAN FD)
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: can-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,zynq-can-1.0
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: can_clk
+            - const: pclk
+      required:
+        - tx-fifo-depth
+        - rx-fifo-depth
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,axi-can-1.00.a
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: can_clk
+            - const: s_axi_aclk
+      required:
+        - tx-fifo-depth
+        - rx-fifo-depth
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - xlnx,canfd-1.0
+              - xlnx,canfd-2.0
+
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: can_clk
+            - const: s_axi_aclk
+      required:
+        - tx-mailbox-count
+        - rx-fifo-depth
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    can@e0008000 {
+        compatible = "xlnx,zynq-can-1.0";
+        reg = <0xe0008000 0x1000>;
+        clocks = <&clkc 19>, <&clkc 36>;
+        clock-names = "can_clk", "pclk";
+        interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-parent = <&intc>;
+        tx-fifo-depth = <0x40>;
+        rx-fifo-depth = <0x40>;
+    };
+
+  - |
+    can@40000000 {
+        compatible = "xlnx,axi-can-1.00.a";
+        reg = <0x40000000 0x10000>;
+        clocks = <&clkc 0>, <&clkc 1>;
+        clock-names = "can_clk", "s_axi_aclk";
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+        tx-fifo-depth = <0x40>;
+        rx-fifo-depth = <0x40>;
+    };
+
+  - |
+    can@40000000 {
+        compatible = "xlnx,canfd-1.0";
+        reg = <0x40000000 0x2000>;
+        clocks = <&clkc 0>, <&clkc 1>;
+        clock-names = "can_clk", "s_axi_aclk";
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+        tx-mailbox-count = <0x20>;
+        rx-fifo-depth = <0x20>;
+    };
+
+  - |
+    can@ff060000 {
+        compatible = "xlnx,canfd-2.0";
+        reg = <0xff060000 0x6000>;
+        clocks = <&clkc 0>, <&clkc 1>;
+        clock-names = "can_clk", "s_axi_aclk";
+        interrupt-parent = <&intc>;
+        interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>;
+        tx-mailbox-count = <0x20>;
+        rx-fifo-depth = <0x40>;
+    };
diff --git a/Documentation/devicetree/bindings/net/can/xilinx_can.txt b/Documentation/devicetree/bindings/net/can/xilinx_can.txt
deleted file mode 100644
index 100cc40b8510..000000000000
--- a/Documentation/devicetree/bindings/net/can/xilinx_can.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Xilinx Axi CAN/Zynq CANPS controller Device Tree Bindings
----------------------------------------------------------
-
-Required properties:
-- compatible		: Should be:
-			  - "xlnx,zynq-can-1.0" for Zynq CAN controllers
-			  - "xlnx,axi-can-1.00.a" for Axi CAN controllers
-			  - "xlnx,canfd-1.0" for CAN FD controllers
-			  - "xlnx,canfd-2.0" for CAN FD 2.0 controllers
-- reg			: Physical base address and size of the controller
-			  registers map.
-- interrupts		: Property with a value describing the interrupt
-			  number.
-- clock-names		: List of input clock names
-			  - "can_clk", "pclk" (For CANPS),
-			  - "can_clk", "s_axi_aclk" (For AXI CAN and CAN FD).
-			  (See clock bindings for details).
-- clocks		: Clock phandles (see clock bindings for details).
-- tx-fifo-depth		: Can Tx fifo depth (Zynq, Axi CAN).
-- rx-fifo-depth		: Can Rx fifo depth (Zynq, Axi CAN, CAN FD in
-                          sequential Rx mode).
-- tx-mailbox-count	: Can Tx mailbox buffer count (CAN FD).
-- rx-mailbox-count	: Can Rx mailbox buffer count (CAN FD in mailbox Rx
-			  mode).
-
-
-Example:
-
-For Zynq CANPS Dts file:
-	zynq_can_0: can@e0008000 {
-			compatible = "xlnx,zynq-can-1.0";
-			clocks = <&clkc 19>, <&clkc 36>;
-			clock-names = "can_clk", "pclk";
-			reg = <0xe0008000 0x1000>;
-			interrupts = <0 28 4>;
-			interrupt-parent = <&intc>;
-			tx-fifo-depth = <0x40>;
-			rx-fifo-depth = <0x40>;
-		};
-For Axi CAN Dts file:
-	axi_can_0: axi-can@40000000 {
-			compatible = "xlnx,axi-can-1.00.a";
-			clocks = <&clkc 0>, <&clkc 1>;
-			clock-names = "can_clk","s_axi_aclk" ;
-			reg = <0x40000000 0x10000>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 59 1>;
-			tx-fifo-depth = <0x40>;
-			rx-fifo-depth = <0x40>;
-		};
-For CAN FD Dts file:
-	canfd_0: canfd@40000000 {
-			compatible = "xlnx,canfd-1.0";
-			clocks = <&clkc 0>, <&clkc 1>;
-			clock-names = "can_clk", "s_axi_aclk";
-			reg = <0x40000000 0x2000>;
-			interrupt-parent = <&intc>;
-			interrupts = <0 59 1>;
-			tx-mailbox-count = <0x20>;
-			rx-fifo-depth = <0x20>;
-		};
diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml
new file mode 100644
index 000000000000..bef5e0f895be
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/cdns,macb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence MACB/GEM Ethernet controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre@microchip.com>
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - cdns,at91rm9200-emac  # Atmel at91rm9200 SoC
+          - const: cdns,emac          # Generic
+
+      - items:
+          - enum:
+              - cdns,zynq-gem         # Xilinx Zynq-7xxx SoC
+              - cdns,zynqmp-gem       # Xilinx Zynq Ultrascale+ MPSoC
+          - const: cdns,gem           # Generic
+        deprecated: true
+
+      - items:
+          - enum:
+              - xlnx,versal-gem       # Xilinx Versal
+              - xlnx,zynq-gem         # Xilinx Zynq-7xxx SoC
+              - xlnx,zynqmp-gem       # Xilinx Zynq Ultrascale+ MPSoC
+          - const: cdns,gem           # Generic
+
+      - items:
+          - enum:
+              - cdns,at91sam9260-macb # Atmel at91sam9 SoCs
+              - cdns,sam9x60-macb     # Microchip sam9x60 SoC
+              - microchip,mpfs-macb   # Microchip PolarFire SoC
+          - const: cdns,macb          # Generic
+
+      - items:
+          - enum:
+              - atmel,sama5d3-macb    # 10/100Mbit IP on Atmel sama5d3 SoCs
+          - enum:
+              - cdns,at91sam9260-macb # Atmel at91sam9 SoCs.
+          - const: cdns,macb          # Generic
+
+      - enum:
+          - atmel,sama5d29-gem        # GEM XL IP (10/100) on Atmel sama5d29 SoCs
+          - atmel,sama5d2-gem         # GEM IP (10/100) on Atmel sama5d2 SoCs
+          - atmel,sama5d3-gem         # Gigabit IP on Atmel sama5d3 SoCs
+          - atmel,sama5d4-gem         # GEM IP (10/100) on Atmel sama5d4 SoCs
+          - cdns,np4-macb             # NP4 SoC devices
+          - microchip,sama7g5-emac    # Microchip SAMA7G5 ethernet interface
+          - microchip,sama7g5-gem     # Microchip SAMA7G5 gigabit ethernet interface
+          - sifive,fu540-c000-gem     # SiFive FU540-C000 SoC
+          - cdns,emac                 # Generic
+          - cdns,gem                  # Generic
+          - cdns,macb                 # Generic
+
+  reg:
+    minItems: 1
+    items:
+      - description: Basic register set
+      - description: GEMGXL Management block registers on SiFive FU540-C000 SoC
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+    description: One interrupt per available hardware queue
+
+  clocks:
+    minItems: 1
+    maxItems: 5
+
+  clock-names:
+    minItems: 1
+    items:
+      - enum: [ ether_clk, hclk, pclk ]
+      - enum: [ hclk, pclk ]
+      - const: tx_clk
+      - enum: [ rx_clk, tsu_clk ]
+      - const: tsu_clk
+
+  local-mac-address: true
+
+  phy-mode: true
+
+  phy-handle: true
+
+  phys:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+    description:
+      Recommended with ZynqMP, specify reset control for this
+      controller instance with zynqmp-reset driver.
+
+  reset-names:
+    maxItems: 1
+
+  fixed-link: true
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  mdio:
+    type: object
+    description:
+      Node containing PHY children. If this node is not present, then PHYs will
+      be direct children.
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]$":
+    type: object
+    $ref: ethernet-phy.yaml#
+
+    properties:
+      reset-gpios: true
+
+      magic-packet:
+        type: boolean
+        description:
+          Indicates that the hardware supports waking up via magic packet.
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phy-mode
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: sifive,fu540-c000-gem
+    then:
+      properties:
+        reg:
+          maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    macb0: ethernet@fffc4000 {
+            compatible = "cdns,macb";
+            reg = <0xfffc4000 0x4000>;
+            interrupts = <21>;
+            phy-mode = "rmii";
+            local-mac-address = [3a 0e 03 04 05 06];
+            clock-names = "pclk", "hclk", "tx_clk";
+            clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ethernet-phy@1 {
+                    reg = <0x1>;
+                    reset-gpios = <&pioE 6 1>;
+            };
+    };
+
+  - |
+    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
+    #include <dt-bindings/phy/phy.h>
+
+    bus {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            gem1: ethernet@ff0c0000 {
+                    compatible = "xlnx,zynqmp-gem", "cdns,gem";
+                    interrupt-parent = <&gic>;
+                    interrupts = <0 59 4>, <0 59 4>;
+                    reg = <0x0 0xff0c0000 0x0 0x1000>;
+                    clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
+                             <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
+                             <&zynqmp_clk GEM_TSU>;
+                    clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    iommus = <&smmu 0x875>;
+                    power-domains = <&zynqmp_firmware PD_ETH_1>;
+                    resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
+                    reset-names = "gem1_rst";
+                    phy-mode = "sgmii";
+                    phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>;
+                    fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
deleted file mode 100644
index 6c559981d110..000000000000
--- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Cortina Systems Gemini Ethernet Controller
-==========================================
-
-This ethernet controller is found in the Gemini SoC family:
-StorLink SL3512 and SL3516, also known as Cortina Systems
-CS3512 and CS3516.
-
-Required properties:
-- compatible: must be "cortina,gemini-ethernet"
-- reg: must contain the global registers and the V-bit and A-bit
-  memory areas, in total three register sets.
-- syscon: a phandle to the system controller
-- #address-cells: must be specified, must be <1>
-- #size-cells: must be specified, must be <1>
-- ranges: should be state like this giving a 1:1 address translation
-  for the subnodes
-
-The subnodes represents the two ethernet ports in this device.
-They are not independent of each other since they share resources
-in the parent node, and are thus children.
-
-Required subnodes:
-- port0: contains the resources for ethernet port 0
-- port1: contains the resources for ethernet port 1
-
-Required subnode properties:
-- compatible: must be "cortina,gemini-ethernet-port"
-- reg: must contain two register areas: the DMA/TOE memory and
-  the GMAC memory area of the port
-- interrupts: should contain the interrupt line of the port.
-  this is nominally a level interrupt active high.
-- resets: this must provide an SoC-integrated reset line for
-  the port.
-- clocks: this should contain a handle to the PCLK clock for
-  clocking the silicon in this port
-- clock-names: must be "PCLK"
-
-Optional subnode properties:
-- phy-mode: see ethernet.txt
-- phy-handle: see ethernet.txt
-
-Example:
-
-mdio-bus {
-	(...)
-	phy0: ethernet-phy@1 {
-		reg = <1>;
-		device_type = "ethernet-phy";
-	};
-	phy1: ethernet-phy@3 {
-		reg = <3>;
-		device_type = "ethernet-phy";
-	};
-};
-
-
-ethernet@60000000 {
-	compatible = "cortina,gemini-ethernet";
-	reg = <0x60000000 0x4000>, /* Global registers, queue */
-	      <0x60004000 0x2000>, /* V-bit */
-	      <0x60006000 0x2000>; /* A-bit */
-	syscon = <&syscon>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	gmac0: ethernet-port@0 {
-		compatible = "cortina,gemini-ethernet-port";
-		reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
-		      <0x6000a000 0x2000>; /* Port 0 GMAC */
-		interrupt-parent = <&intcon>;
-		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-		resets = <&syscon GEMINI_RESET_GMAC0>;
-		clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
-		clock-names = "PCLK";
-		phy-mode = "rgmii";
-		phy-handle = <&phy0>;
-	};
-
-	gmac1: ethernet-port@1 {
-		compatible = "cortina,gemini-ethernet-port";
-		reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
-		      <0x6000e000 0x2000>; /* Port 1 GMAC */
-		interrupt-parent = <&intcon>;
-		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-		resets = <&syscon GEMINI_RESET_GMAC1>;
-		clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
-		clock-names = "PCLK";
-		phy-mode = "rgmii";
-		phy-handle = <&phy1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
new file mode 100644
index 000000000000..44fd23a5fa2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/cortina,gemini-ethernet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cortina Systems Gemini Ethernet Controller
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This ethernet controller is found in the Gemini SoC family:
+  StorLink SL3512 and SL3516, also known as Cortina Systems
+  CS3512 and CS3516.
+
+properties:
+  compatible:
+    const: cortina,gemini-ethernet
+
+  reg:
+    minItems: 3
+    description: must contain the global registers and the V-bit and A-bit
+      memory areas, in total three register sets.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+# The subnodes represents the two ethernet ports in this device.
+# They are not independent of each other since they share resources
+# in the parent node, and are thus children.
+patternProperties:
+  "^ethernet-port@[0-9]+$":
+    type: object
+    unevaluatedProperties: false
+    description: contains the resources for ethernet port
+    allOf:
+      - $ref: ethernet-controller.yaml#
+    properties:
+      compatible:
+        const: cortina,gemini-ethernet-port
+
+      reg:
+        items:
+          - description: DMA/TOE memory
+          - description: GMAC memory area of the port
+
+      interrupts:
+        maxItems: 1
+        description: should contain the interrupt line of the port.
+                     this is nominally a level interrupt active high.
+
+      resets:
+        maxItems: 1
+        description: this must provide an SoC-integrated reset line for the port.
+
+      clocks:
+        maxItems: 1
+        description: this should contain a handle to the PCLK clock for
+                     clocking the silicon in this port
+
+      clock-names:
+        const: PCLK
+
+    required:
+      - reg
+      - compatible
+      - interrupts
+      - resets
+      - clocks
+      - clock-names
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/cortina,gemini-clock.h>
+    #include <dt-bindings/reset/cortina,gemini-reset.h>
+    mdio0: mdio {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      phy0: ethernet-phy@1 {
+        reg = <1>;
+        device_type = "ethernet-phy";
+      };
+      phy1: ethernet-phy@3 {
+        reg = <3>;
+        device_type = "ethernet-phy";
+      };
+    };
+
+
+    ethernet@60000000 {
+        compatible = "cortina,gemini-ethernet";
+        reg = <0x60000000 0x4000>, /* Global registers, queue */
+              <0x60004000 0x2000>, /* V-bit */
+              <0x60006000 0x2000>; /* A-bit */
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        gmac0: ethernet-port@0 {
+                compatible = "cortina,gemini-ethernet-port";
+                reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
+                      <0x6000a000 0x2000>; /* Port 0 GMAC */
+                interrupt-parent = <&intcon>;
+                interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+                resets = <&syscon GEMINI_RESET_GMAC0>;
+                clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
+                clock-names = "PCLK";
+                phy-mode = "rgmii";
+                phy-handle = <&phy0>;
+        };
+
+        gmac1: ethernet-port@1 {
+                compatible = "cortina,gemini-ethernet-port";
+                reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
+                      <0x6000e000 0x2000>; /* Port 1 GMAC */
+                interrupt-parent = <&intcon>;
+                interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+                resets = <&syscon GEMINI_RESET_GMAC1>;
+                clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
+                clock-names = "PCLK";
+                phy-mode = "rgmii";
+                phy-handle = <&phy1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 7c7ac5eb0313..ef655f386b2e 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -20,7 +20,7 @@ Required properties:
 - active_slave		: Specifies the slave to use for time stamping,
 			  ethtool and SIOCGMIIPHY
 - cpsw-phy-sel		: Specifies the phandle to the CPSW phy mode selection
-			  device. See also cpsw-phy-sel.txt for it's binding.
+			  device. See also cpsw-phy-sel.txt for its binding.
 			  Note that in legacy cases cpsw-phy-sel may be
 			  a child device instead of a phandle
 			  (DEPRECATED, use phys property instead).
diff --git a/Documentation/devicetree/bindings/net/davicom,dm9051.yaml b/Documentation/devicetree/bindings/net/davicom,dm9051.yaml
new file mode 100644
index 000000000000..52e852fef753
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/davicom,dm9051.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/davicom,dm9051.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Davicom DM9051 SPI Ethernet Controller
+
+maintainers:
+  - Joseph CHANG <josright123@gmail.com>
+
+description: |
+  The DM9051 is a fully integrated and cost-effective low pin count single
+  chip Fast Ethernet controller with a Serial Peripheral Interface (SPI).
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: davicom,dm9051
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 45000000
+
+  interrupts:
+    maxItems: 1
+
+  local-mac-address: true
+
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+  - spi-max-frequency
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  # Raspberry Pi platform
+  - |
+    /* for Raspberry Pi with pin control stuff for GPIO irq */
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@0 {
+            compatible = "davicom,dm9051";
+            reg = <0>; /* spi chip select */
+            local-mac-address = [00 00 00 00 00 00];
+            interrupt-parent = <&gpio>;
+            interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+            spi-max-frequency = <31200000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/ar9331.txt b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
index 320607cbbb17..f824fdae0da2 100644
--- a/Documentation/devicetree/bindings/net/dsa/ar9331.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ar9331.txt
@@ -76,7 +76,6 @@ eth1: ethernet@1a000000 {
 
 				switch_port0: port@0 {
 					reg = <0x0>;
-					label = "cpu";
 					ethernet = <&eth1>;
 
 					phy-mode = "gmii";
diff --git a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
index 3f01b65f3b22..9565a7402146 100644
--- a/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/arrow,xrs700x.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/net/dsa/arrow,xrs700x.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Arrow SpeedChips XRS7000 Series Switch Device Tree Bindings
+title: Arrow SpeedChips XRS7000 Series Switch
 
 allOf:
-  - $ref: dsa.yaml#
+  - $ref: dsa.yaml#/$defs/ethernet-ports
 
 maintainers:
   - George McCollister <george.mccollister@gmail.com>
@@ -61,8 +61,9 @@ examples:
                 };
                 ethernet-port@3 {
                     reg = <3>;
-                    label = "cpu";
                     ethernet = <&fec1>;
+                    phy-mode = "rgmii-id";
+
                     fixed-link {
                         speed = <1000>;
                         full-duplex;
diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
index c3c938893ad9..4c78c546343f 100644
--- a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml
@@ -6,9 +6,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Broadcom BCM53xx Ethernet switches
 
-allOf:
-  - $ref: dsa.yaml#
-
 maintainers:
   - Florian Fainelli <f.fainelli@gmail.com>
 
@@ -22,6 +19,7 @@ properties:
       - const: brcm,bcm53115
       - const: brcm,bcm53125
       - const: brcm,bcm53128
+      - const: brcm,bcm53134
       - const: brcm,bcm5365
       - const: brcm,bcm5395
       - const: brcm,bcm5389
@@ -60,61 +58,82 @@ properties:
       - items:
           - enum:
               - brcm,bcm3384-switch
+              - brcm,bcm6318-switch
               - brcm,bcm6328-switch
+              - brcm,bcm6362-switch
               - brcm,bcm6368-switch
+              - brcm,bcm63268-switch
           - const: brcm,bcm63xx-switch
 
 required:
   - compatible
   - reg
 
-# BCM585xx/586xx/88312 SoCs
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - brcm,bcm58522-srab
-          - brcm,bcm58523-srab
-          - brcm,bcm58525-srab
-          - brcm,bcm58622-srab
-          - brcm,bcm58623-srab
-          - brcm,bcm58625-srab
-          - brcm,bcm88312-srab
-then:
-  properties:
-    reg:
-      minItems: 3
-      maxItems: 3
-    reg-names:
-      items:
-        - const: srab
-        - const: mux_config
-        - const: sgmii_config
-    interrupts:
-      minItems: 13
-      maxItems: 13
-    interrupt-names:
-      items:
-        - const: link_state_p0
-        - const: link_state_p1
-        - const: link_state_p2
-        - const: link_state_p3
-        - const: link_state_p4
-        - const: link_state_p5
-        - const: link_state_p7
-        - const: link_state_p8
-        - const: phy
-        - const: ts
-        - const: imp_sleep_timer_p5
-        - const: imp_sleep_timer_p7
-        - const: imp_sleep_timer_p8
-  required:
-    - interrupts
-else:
-  properties:
-    reg:
-      maxItems: 1
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm5325
+              - brcm,bcm53115
+              - brcm,bcm53125
+              - brcm,bcm53128
+              - brcm,bcm5365
+              - brcm,bcm5395
+              - brcm,bcm5397
+              - brcm,bcm5398
+    then:
+      $ref: /schemas/spi/spi-peripheral-props.yaml
+
+    # BCM585xx/586xx/88312 SoCs
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - brcm,bcm58522-srab
+              - brcm,bcm58523-srab
+              - brcm,bcm58525-srab
+              - brcm,bcm58622-srab
+              - brcm,bcm58623-srab
+              - brcm,bcm58625-srab
+              - brcm,bcm88312-srab
+    then:
+      properties:
+        reg:
+          minItems: 3
+          maxItems: 3
+        reg-names:
+          items:
+            - const: srab
+            - const: mux_config
+            - const: sgmii_config
+        interrupts:
+          minItems: 13
+          maxItems: 13
+        interrupt-names:
+          items:
+            - const: link_state_p0
+            - const: link_state_p1
+            - const: link_state_p2
+            - const: link_state_p3
+            - const: link_state_p4
+            - const: link_state_p5
+            - const: link_state_p7
+            - const: link_state_p8
+            - const: phy
+            - const: ts
+            - const: imp_sleep_timer_p5
+            - const: imp_sleep_timer_p7
+            - const: imp_sleep_timer_p8
+      required:
+        - interrupts
+    else:
+      properties:
+        reg:
+          maxItems: 1
 
 unevaluatedProperties: false
 
@@ -154,7 +173,6 @@ examples:
 
                 port@8 {
                     reg = <8>;
-                    label = "cpu";
                     phy-mode = "rgmii-txid";
                     ethernet = <&eth0>;
                     fixed-link {
@@ -237,8 +255,9 @@ examples:
 
                 port@8 {
                     ethernet = <&amac2>;
-                    label = "cpu";
                     reg = <8>;
+                    phy-mode = "internal";
+
                     fixed-link {
                         speed = <1000>;
                         full-duplex;
diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml
index d159ac78cec1..c745407f2f68 100644
--- a/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/brcm,sf2.yaml
@@ -76,29 +76,26 @@ properties:
       supports reporting the number of packets in-flight in a switch queue
     type: boolean
 
-  "#address-cells":
-    const: 1
-
-  "#size-cells":
-    const: 0
-
   ports:
     type: object
 
-    properties:
-      brcm,use-bcm-hdr:
-        description: if present, indicates that the switch port has Broadcom
-          tags enabled (per-packet metadata)
-        type: boolean
+    patternProperties:
+      '^port@[0-9a-f]$':
+        $ref: dsa-port.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          brcm,use-bcm-hdr:
+            description: if present, indicates that the switch port has Broadcom
+              tags enabled (per-packet metadata)
+            type: boolean
 
 required:
   - reg
   - interrupts
-  - "#address-cells"
-  - "#size-cells"
 
 allOf:
-  - $ref: "dsa.yaml#"
+  - $ref: dsa.yaml#
   - if:
       properties:
         compatible:
@@ -140,8 +137,6 @@ examples:
   - |
     switch@f0b00000 {
             compatible = "brcm,bcm7445-switch-v4.0";
-            #address-cells = <1>;
-            #size-cells = <0>;
             reg = <0xf0b00000 0x40000>,
                   <0xf0b40000 0x110>,
                   <0xf0b40340 0x30>,
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
new file mode 100644
index 000000000000..480120469953
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/dsa-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic DSA Switch Port
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vladimir Oltean <olteanv@gmail.com>
+
+description:
+  A DSA switch port is a component of a switch that manages one MAC, and can
+  pass Ethernet frames. It can act as a stanadard Ethernet switch port, or have
+  DSA-specific functionality.
+
+$ref: /schemas/net/ethernet-switch-port.yaml#
+
+properties:
+  reg:
+    items:
+      - description: Port number
+
+  label:
+    description:
+      Describes the label associated with this port, which will become
+      the netdev name
+    $ref: /schemas/types.yaml#/definitions/string
+
+  link:
+    description:
+      Should be a list of phandles to other switch's DSA port. This
+      port is used as the outgoing port towards the phandle ports. The
+      full routing information must be given, not just the one hop
+      routes to neighbouring switches
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+
+  ethernet:
+    description:
+      Should be a phandle to a valid Ethernet device node.  This host
+      device is what the switch port is connected to
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  dsa-tag-protocol:
+    description:
+      Instead of the default, the switch will use this tag protocol if
+      possible. Useful when a device supports multiple protocols and
+      the default is incompatible with the Ethernet device.
+    enum:
+      - dsa
+      - edsa
+      - ocelot
+      - ocelot-8021q
+      - rtl8_4
+      - rtl8_4t
+      - seville
+
+# CPU and DSA ports must have phylink-compatible link descriptions
+if:
+  oneOf:
+    - required: [ ethernet ]
+    - required: [ link ]
+then:
+  allOf:
+    - required:
+        - phy-mode
+    - oneOf:
+        - required:
+            - fixed-link
+        - required:
+            - phy-handle
+        - required:
+            - managed
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index 16aa192c118e..8d971813bab6 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -4,12 +4,12 @@
 $id: http://devicetree.org/schemas/net/dsa/dsa.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ethernet Switch Device Tree Bindings
+title: Ethernet Switch
 
 maintainers:
   - Andrew Lunn <andrew@lunn.ch>
   - Florian Fainelli <f.fainelli@gmail.com>
-  - Vivien Didelot <vivien.didelot@gmail.com>
+  - Vladimir Oltean <olteanv@gmail.com>
 
 description:
   This binding represents Ethernet Switches which have a dedicated CPU
@@ -18,10 +18,9 @@ description:
 
 select: false
 
-properties:
-  $nodename:
-    pattern: "^(ethernet-)?switch(@.*)?$"
+$ref: /schemas/net/ethernet-switch.yaml#
 
+properties:
   dsa,member:
     minItems: 2
     maxItems: 2
@@ -32,76 +31,28 @@ properties:
       (single device hanging off a CPU port) must not specify this property
     $ref: /schemas/types.yaml#/definitions/uint32-array
 
-patternProperties:
-  "^(ethernet-)?ports$":
-    type: object
-    properties:
-      '#address-cells':
-        const: 1
-      '#size-cells':
-        const: 0
+additionalProperties: true
+
+$defs:
+  ethernet-ports:
+    description: A DSA switch without any extra port properties
+    $ref: '#/'
 
     patternProperties:
-      "^(ethernet-)?port@[0-9]+$":
+      "^(ethernet-)?ports$":
         type: object
-        description: Ethernet switch ports
-
-        properties:
-          reg:
-            description: Port number
-
-          label:
-            description:
-              Describes the label associated with this port, which will become
-              the netdev name
-            $ref: /schemas/types.yaml#/definitions/string
-
-          link:
-            description:
-              Should be a list of phandles to other switch's DSA port. This
-              port is used as the outgoing port towards the phandle ports. The
-              full routing information must be given, not just the one hop
-              routes to neighbouring switches
-            $ref: /schemas/types.yaml#/definitions/phandle-array
-
-          ethernet:
-            description:
-              Should be a phandle to a valid Ethernet device node.  This host
-              device is what the switch port is connected to
-            $ref: /schemas/types.yaml#/definitions/phandle
-
-          dsa-tag-protocol:
-            description:
-              Instead of the default, the switch will use this tag protocol if
-              possible. Useful when a device supports multiple protcols and
-              the default is incompatible with the Ethernet device.
-            enum:
-              - dsa
-              - edsa
-
-          phy-handle: true
-
-          phy-mode: true
-
-          fixed-link: true
-
-          mac-address: true
-
-          sfp: true
-
-          managed: true
-
-        required:
-          - reg
-
         additionalProperties: false
 
-oneOf:
-  - required:
-      - ports
-  - required:
-      - ethernet-ports
-
-additionalProperties: true
+        properties:
+          '#address-cells':
+            const: 1
+          '#size-cells':
+            const: 0
+
+        patternProperties:
+          "^(ethernet-)?port@[0-9]+$":
+            description: Ethernet switch ports
+            $ref: dsa-port.yaml#
+            unevaluatedProperties: false
 
 ...
diff --git a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
index 5592f58fa6f0..4021b054f684 100644
--- a/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/hirschmann,hellcreek.yaml
@@ -4,15 +4,15 @@
 $id: http://devicetree.org/schemas/net/dsa/hirschmann,hellcreek.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Hirschmann Hellcreek TSN Switch Device Tree Bindings
+title: Hirschmann Hellcreek TSN Switch
 
 allOf:
-  - $ref: dsa.yaml#
+  - $ref: dsa.yaml#/$defs/ethernet-ports
 
 maintainers:
   - Andrew Lunn <andrew@lunn.ch>
   - Florian Fainelli <f.fainelli@gmail.com>
-  - Vivien Didelot <vivien.didelot@gmail.com>
+  - Vladimir Oltean <olteanv@gmail.com>
   - Kurt Kanzenbach <kurt@linutronix.de>
 
 description:
@@ -48,7 +48,7 @@ properties:
       "^led@[01]$":
         type: object
         description: Hellcreek leds
-        $ref: ../../leds/common.yaml#
+        $ref: /schemas/leds/common.yaml#
 
         properties:
           reg:
@@ -91,8 +91,13 @@ examples:
 
                 port@0 {
                     reg = <0>;
-                    label = "cpu";
                     ethernet = <&gmac0>;
+                    phy-mode = "mii";
+
+                    fixed-link {
+                        speed = <100>;
+                        full-duplex;
+                    };
                 };
 
                 port@2 {
diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
index 464d6bf87605..46a732087f5c 100644
--- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt
@@ -46,7 +46,6 @@ I2C managed mode:
 
 			port@0 { /* RMII fixed link to master */
 				reg = <0>;
-				label = "cpu";
 				ethernet = <&master>;
 			};
 
@@ -83,7 +82,6 @@ MDIO managed mode:
 
 					port@0 {
 						reg = <0>;
-						label = "cpu";
 						ethernet = <&master>;
 					};
 
diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
index e3829d3e480e..8bb1eff21cb1 100644
--- a/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq-gswip.txt
@@ -96,7 +96,6 @@ switch@e108000 {
 
 		port@6 {
 			reg = <0x6>;
-			label = "cpu";
 			ethernet = <&eth0>;
 		};
 	};
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
new file mode 100644
index 000000000000..e532c6b795f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -0,0 +1,812 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/mediatek,mt7530.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT7530 and MT7531 Ethernet Switches
+
+maintainers:
+  - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Landen Chao <Landen.Chao@mediatek.com>
+  - DENG Qingfang <dqfext@gmail.com>
+  - Sean Wang <sean.wang@mediatek.com>
+  - Daniel Golle <daniel@makrotopia.org>
+
+description: |
+  There are three versions of MT7530, standalone, in a multi-chip module and
+  built-into a SoC.
+
+  MT7530 is a part of the multi-chip module in MT7620AN, MT7620DA, MT7620DAN,
+  MT7620NN, MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs.
+
+  The MT7988 SoC comes with a built-in switch similar to MT7531 as well as four
+  Gigabit Ethernet PHYs. The switch registers are directly mapped into the SoC's
+  memory map rather than using MDIO. The switch got an internally connected 10G
+  CPU port and 4 user ports connected to the built-in Gigabit Ethernet PHYs.
+
+  MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs
+  and the switch registers are directly mapped into SoC's memory map rather than
+  using MDIO. The DSA driver currently doesn't support MT7620 variants.
+
+  There is only the standalone version of MT7531.
+
+  Port 5 on MT7530 has got various ways of configuration:
+
+    - Port 5 can be used as a CPU port.
+
+    - PHY 0 or 4 of the switch can be muxed to gmac5 of the switch. Therefore,
+      the gmac of the SoC which is wired to port 5 can connect to the PHY.
+      This is usually used for connecting the wan port directly to the CPU to
+      achieve 2 Gbps routing in total.
+
+      The driver looks up the reg on the ethernet-phy node, which the phy-handle
+      property on the gmac node refers to, to mux the specified phy.
+
+      The driver requires the gmac of the SoC to have "mediatek,eth-mac" as the
+      compatible string and the reg must be 1. So, for now, only gmac1 of a
+      MediaTek SoC can benefit this. Banana Pi BPI-R2 suits this.
+
+      For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function.
+
+      Check out example 5.
+
+    - For the multi-chip module MT7530, in case of an external phy wired to
+      gmac1 of the SoC, port 5 must not be enabled.
+
+      In case of muxing PHY 0 or 4, the external phy must not be enabled.
+
+      For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function.
+
+      Check out example 6.
+
+    - Port 5 can be wired to an external phy. Port 5 becomes a DSA slave.
+
+      For the multi-chip module MT7530, the external phy must be wired TX to TX
+      to gmac1 of the SoC for this to work. Ubiquiti EdgeRouter X SFP is wired
+      this way.
+
+      For the multi-chip module MT7530, muxing PHY 0 or 4 won't work when the
+      external phy is connected TX to TX.
+
+      For the MT7621 SoCs, rgmii2 group must be claimed with gpio function.
+
+      Check out example 7.
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          Standalone MT7530 and multi-chip module MT7530 in MT7623AI SoC
+        const: mediatek,mt7530
+
+      - description:
+          Standalone MT7531
+        const: mediatek,mt7531
+
+      - description:
+          Multi-chip module MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
+        const: mediatek,mt7621
+
+      - description:
+          Built-in switch of the MT7988 SoC
+        const: mediatek,mt7988-switch
+
+  reg:
+    maxItems: 1
+
+  core-supply:
+    description:
+      Phandle to the regulator node necessary for the core power.
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller:
+    type: boolean
+    description: |
+      If defined, LED controller of the MT7530 switch will run on GPIO mode.
+
+      There are 15 controllable pins.
+      port 0 LED 0..2 as GPIO 0..2
+      port 1 LED 0..2 as GPIO 3..5
+      port 2 LED 0..2 as GPIO 6..8
+      port 3 LED 0..2 as GPIO 9..11
+      port 4 LED 0..2 as GPIO 12..14
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    maxItems: 1
+
+  io-supply:
+    description: |
+      Phandle to the regulator node necessary for the I/O power.
+      See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt for
+      details for the regulator setup on these boards.
+
+  mediatek,mcm:
+    type: boolean
+    description:
+      Used for MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs which the MT7530
+      switch is a part of the multi-chip module.
+
+  reset-gpios:
+    description: |
+      GPIO to reset the switch. Use this if mediatek,mcm is not used.
+      This property is optional because some boards share the reset line with
+      other components which makes it impossible to probe the switch if the
+      reset line is used.
+    maxItems: 1
+
+  reset-names:
+    const: mcm
+
+  resets:
+    description:
+      Phandle pointing to the system reset controller with line index for the
+      ethsys.
+    maxItems: 1
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    type: object
+
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        type: object
+
+        properties:
+          reg:
+            description:
+              Port address described must be 5 or 6 for CPU port and from 0 to 5
+              for user ports.
+
+        allOf:
+          - if:
+              required: [ ethernet ]
+            then:
+              properties:
+                reg:
+                  enum:
+                    - 5
+                    - 6
+
+required:
+  - compatible
+  - reg
+
+$defs:
+  mt7530-dsa-port:
+    patternProperties:
+      "^(ethernet-)?ports$":
+        patternProperties:
+          "^(ethernet-)?port@[0-9]+$":
+            if:
+              required: [ ethernet ]
+            then:
+              if:
+                properties:
+                  reg:
+                    const: 5
+              then:
+                properties:
+                  phy-mode:
+                    enum:
+                      - gmii
+                      - mii
+                      - rgmii
+              else:
+                properties:
+                  phy-mode:
+                    enum:
+                      - rgmii
+                      - trgmii
+
+  mt7531-dsa-port:
+    patternProperties:
+      "^(ethernet-)?ports$":
+        patternProperties:
+          "^(ethernet-)?port@[0-9]+$":
+            if:
+              required: [ ethernet ]
+            then:
+              if:
+                properties:
+                  reg:
+                    const: 5
+              then:
+                properties:
+                  phy-mode:
+                    enum:
+                      - 1000base-x
+                      - 2500base-x
+                      - rgmii
+                      - sgmii
+              else:
+                properties:
+                  phy-mode:
+                    enum:
+                      - 1000base-x
+                      - 2500base-x
+                      - sgmii
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+  - if:
+      required:
+        - mediatek,mcm
+    then:
+      properties:
+        reset-gpios: false
+
+      required:
+        - resets
+        - reset-names
+
+  - dependencies:
+      interrupt-controller: [ interrupts ]
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7530
+    then:
+      $ref: "#/$defs/mt7530-dsa-port"
+      required:
+        - core-supply
+        - io-supply
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7531
+    then:
+      $ref: "#/$defs/mt7531-dsa-port"
+      properties:
+        gpio-controller: false
+        mediatek,mcm: false
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7621
+    then:
+      $ref: "#/$defs/mt7530-dsa-port"
+      required:
+        - mediatek,mcm
+
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt7988-switch
+    then:
+      $ref: "#/$defs/mt7530-dsa-port"
+      properties:
+        gpio-controller: false
+        mediatek,mcm: false
+        reset-names: false
+
+unevaluatedProperties: false
+
+examples:
+  # Example 1: Standalone MT7530
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@1f {
+            compatible = "mediatek,mt7530";
+            reg = <0x1f>;
+
+            reset-gpios = <&pio 33 0>;
+
+            core-supply = <&mt6323_vpa_reg>;
+            io-supply = <&mt6323_vemc3v3_reg>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "rgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 2: MT7530 in MT7623AI SoC
+  - |
+    #include <dt-bindings/reset/mt2701-resets.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@1f {
+            compatible = "mediatek,mt7530";
+            reg = <0x1f>;
+
+            mediatek,mcm;
+            resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
+            reset-names = "mcm";
+
+            core-supply = <&mt6323_vpa_reg>;
+            io-supply = <&mt6323_vemc3v3_reg>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "trgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 3: Standalone MT7531
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@0 {
+            compatible = "mediatek,mt7531";
+            reg = <0>;
+
+            reset-gpios = <&pio 54 0>;
+
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&pio>;
+            interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "2500base-x";
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 4: MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@1f {
+            compatible = "mediatek,mt7621";
+            reg = <0x1f>;
+
+            mediatek,mcm;
+            resets = <&sysc MT7621_RST_MCM>;
+            reset-names = "mcm";
+
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    label = "lan1";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan2";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan3";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan4";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "wan";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    ethernet = <&gmac0>;
+                    phy-mode = "trgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 5: MT7621: mux MT7530's phy4 to SoC's gmac1
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&rgmii2_pins>;
+
+        mac@1 {
+            compatible = "mediatek,eth-mac";
+            reg = <1>;
+
+            phy-mode = "rgmii";
+            phy-handle = <&example5_ethphy4>;
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* MT7530's phy4 */
+            example5_ethphy4: ethernet-phy@4 {
+                reg = <4>;
+            };
+
+            switch@1f {
+                compatible = "mediatek,mt7621";
+                reg = <0x1f>;
+
+                mediatek,mcm;
+                resets = <&sysc MT7621_RST_MCM>;
+                reset-names = "mcm";
+
+                interrupt-controller;
+                #interrupt-cells = <1>;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+                ethernet-ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        label = "lan1";
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        label = "lan2";
+                    };
+
+                    port@2 {
+                        reg = <2>;
+                        label = "lan3";
+                    };
+
+                    port@3 {
+                        reg = <3>;
+                        label = "lan4";
+                    };
+
+                    /* Commented out, phy4 is connected to gmac1.
+                    port@4 {
+                        reg = <4>;
+                        label = "wan";
+                    };
+                    */
+
+                    port@6 {
+                        reg = <6>;
+                        ethernet = <&gmac0>;
+                        phy-mode = "trgmii";
+
+                        fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                        };
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 6: MT7621: mux external phy to SoC's gmac1
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&rgmii2_pins>;
+
+        mac@1 {
+            compatible = "mediatek,eth-mac";
+            reg = <1>;
+
+            phy-mode = "rgmii";
+            phy-handle = <&example6_ethphy7>;
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* External PHY */
+            example6_ethphy7: ethernet-phy@7 {
+                reg = <7>;
+                phy-mode = "rgmii";
+            };
+
+            switch@1f {
+                compatible = "mediatek,mt7621";
+                reg = <0x1f>;
+
+                mediatek,mcm;
+                resets = <&sysc MT7621_RST_MCM>;
+                reset-names = "mcm";
+
+                interrupt-controller;
+                #interrupt-cells = <1>;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+                ethernet-ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        label = "lan1";
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        label = "lan2";
+                    };
+
+                    port@2 {
+                        reg = <2>;
+                        label = "lan3";
+                    };
+
+                    port@3 {
+                        reg = <3>;
+                        label = "lan4";
+                    };
+
+                    port@4 {
+                        reg = <4>;
+                        label = "wan";
+                    };
+
+                    port@6 {
+                        reg = <6>;
+                        ethernet = <&gmac0>;
+                        phy-mode = "trgmii";
+
+                        fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                        };
+                    };
+                };
+            };
+        };
+    };
+
+  # Example 7: MT7621: mux external phy to MT7530's port 5
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/reset/mt7621-reset.h>
+
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&rgmii2_pins>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            /* External PHY */
+            example7_ethphy7: ethernet-phy@7 {
+                reg = <7>;
+                phy-mode = "rgmii";
+            };
+
+            switch@1f {
+                compatible = "mediatek,mt7621";
+                reg = <0x1f>;
+
+                mediatek,mcm;
+                resets = <&sysc MT7621_RST_MCM>;
+                reset-names = "mcm";
+
+                interrupt-controller;
+                #interrupt-cells = <1>;
+                interrupt-parent = <&gic>;
+                interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
+
+                ethernet-ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        label = "lan1";
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        label = "lan2";
+                    };
+
+                    port@2 {
+                        reg = <2>;
+                        label = "lan3";
+                    };
+
+                    port@3 {
+                        reg = <3>;
+                        label = "lan4";
+                    };
+
+                    port@4 {
+                        reg = <4>;
+                        label = "wan";
+                    };
+
+                    port@5 {
+                        reg = <5>;
+                        label = "extphy";
+                        phy-mode = "rgmii-txid";
+                        phy-handle = <&example7_ethphy7>;
+                    };
+
+                    port@6 {
+                        reg = <6>;
+                        ethernet = <&gmac0>;
+                        phy-mode = "trgmii";
+
+                        fixed-link {
+                            speed = <1000>;
+                            full-duplex;
+                            pause;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index 84985f53bffd..e51be1ac0362 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -11,7 +11,8 @@ maintainers:
   - Woojung Huh <Woojung.Huh@microchip.com>
 
 allOf:
-  - $ref: dsa.yaml#
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
   # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional
@@ -42,6 +43,12 @@ properties:
     description:
       Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz.
 
+  microchip,synclko-disable:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set if the output SYNCLKO clock should be disabled. Do not mix with
+      microchip,synclko-125.
+
 required:
   - compatible
   - reg
@@ -60,7 +67,7 @@ examples:
         };
     };
 
-    spi0 {
+    spi {
         #address-cells = <1>;
         #size-cells = <0>;
 
@@ -100,8 +107,9 @@ examples:
                 };
                 port@5 {
                     reg = <5>;
-                    label = "cpu";
                     ethernet = <&eth0>;
+                    phy-mode = "rgmii";
+
                     fixed-link {
                         speed = <1000>;
                         full-duplex;
@@ -137,8 +145,9 @@ examples:
                 };
                 port@6 {
                     reg = <6>;
-                    label = "cpu";
                     ethernet = <&eth0>;
+                    phy-mode = "rgmii";
+
                     fixed-link {
                         speed = <1000>;
                         full-duplex;
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
new file mode 100644
index 000000000000..8d7e878b84dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/microchip,lan937x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LAN937x Ethernet Switch Series
+
+maintainers:
+  - UNGLinuxDriver@microchip.com
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+properties:
+  compatible:
+    enum:
+      - microchip,lan9370
+      - microchip,lan9371
+      - microchip,lan9372
+      - microchip,lan9373
+      - microchip,lan9374
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 50000000
+
+  reset-gpios:
+    description: Optional gpio specifier for a reset line
+    maxItems: 1
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        allOf:
+          - if:
+              properties:
+                phy-mode:
+                  contains:
+                    enum:
+                      - rgmii
+                      - rgmii-id
+                      - rgmii-txid
+                      - rgmii-rxid
+            then:
+              properties:
+                rx-internal-delay-ps:
+                  enum: [0, 2000]
+                  default: 0
+                tx-internal-delay-ps:
+                  enum: [0, 2000]
+                  default: 0
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    macb0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            fixed-link {
+                    speed = <1000>;
+                    full-duplex;
+            };
+    };
+
+    spi {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            lan9374: switch@0 {
+                    compatible = "microchip,lan9374";
+                    reg = <0>;
+                    spi-max-frequency = <44000000>;
+
+                    ethernet-ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    reg = <0>;
+                                    label = "lan1";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy0>;
+                            };
+
+                            port@1 {
+                                    reg = <1>;
+                                    label = "lan2";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy1>;
+                            };
+
+                            port@2 {
+                                    reg = <2>;
+                                    label = "lan4";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy2>;
+                            };
+
+                            port@3 {
+                                    reg = <3>;
+                                    label = "lan6";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy3>;
+                            };
+
+                            port@4 {
+                                    reg = <4>;
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <2000>;
+                                    ethernet = <&macb0>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+
+                            port@5 {
+                                    reg = <5>;
+                                    label = "lan7";
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <2000>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+
+                            port@6 {
+                                    reg = <6>;
+                                    label = "lan5";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy6>;
+                            };
+
+                            port@7 {
+                                    reg = <7>;
+                                    label = "lan3";
+                                    phy-mode = "internal";
+                                    phy-handle = <&t1phy7>;
+                            };
+                    };
+
+                    mdio {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            t1phy0: ethernet-phy@0{
+                                    reg = <0x0>;
+                            };
+
+                            t1phy1: ethernet-phy@1{
+                                    reg = <0x1>;
+                            };
+
+                            t1phy2: ethernet-phy@2{
+                                    reg = <0x2>;
+                            };
+
+                            t1phy3: ethernet-phy@3{
+                                    reg = <0x3>;
+                            };
+
+                            t1phy6: ethernet-phy@6{
+                                    reg = <0x6>;
+                            };
+
+                            t1phy7: ethernet-phy@7{
+                                    reg = <0x7>;
+                            };
+                    };
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
new file mode 100644
index 000000000000..fe02d05196e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
@@ -0,0 +1,260 @@
+# SPDX-License-Identifier: (GPL-2.0 OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/mscc,ocelot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Ocelot Switch Family
+
+maintainers:
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+  - Claudiu Manoil <claudiu.manoil@nxp.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+  - UNGLinuxDriver@microchip.com
+
+description: |
+  There are multiple switches which are either part of the Ocelot-1 family, or
+  derivatives of this architecture. These switches can be found embedded in
+  various SoCs and accessed using MMIO, or as discrete chips and accessed over
+  SPI or PCIe. The present DSA binding shall be used when the host controlling
+  them performs packet I/O primarily through an Ethernet port of the switch
+  (which is attached to an Ethernet port of the host), rather than through
+  Frame DMA or register-based I/O.
+
+  VSC9953 (Seville):
+
+    This is found in the NXP T1040, where it is a memory-mapped platform
+    device.
+
+    The following PHY interface types are supported:
+
+      - phy-mode = "internal": on ports 8 and 9
+      - phy-mode = "sgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
+      - phy-mode = "qsgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
+      - phy-mode = "1000base-x": on ports 0, 1, 2, 3, 4, 5, 6, 7
+
+  VSC9959 (Felix):
+
+    This is found in the NXP LS1028A. It is a PCI device, part of the larger
+    enetc root complex. As a result, the ethernet-switch node is a sub-node of
+    the PCIe root complex node and its "reg" property conforms to the parent
+    node bindings, describing it as PF 5 of device 0, bus 0.
+
+    If any external switch port is enabled, the enetc PF2 (enetc_port2) should
+    be enabled as well. This is because the internal MDIO bus (exposed through
+    EA BAR 0) used to access the MAC PCS registers truly belongs to the enetc
+    port 2 and not to Felix.
+
+    The following PHY interface types are supported:
+
+      - phy-mode = "internal": on ports 4 and 5
+      - phy-mode = "sgmii": on ports 0, 1, 2, 3
+      - phy-mode = "qsgmii": on ports 0, 1, 2, 3
+      - phy-mode = "usxgmii": on ports 0, 1, 2, 3
+      - phy-mode = "1000base-x": on ports 0, 1, 2, 3
+      - phy-mode = "2500base-x": on ports 0, 1, 2, 3
+
+properties:
+  compatible:
+    enum:
+      - mscc,vsc9953-switch
+      - pci1957,eef0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+    description:
+      Used to signal availability of PTP TX timestamps, and state changes of
+      the MAC merge layer of ports that support Frame Preemption.
+
+  little-endian: true
+  big-endian: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+  - if:
+      properties:
+        compatible:
+          const: pci1957,eef0
+    then:
+      required:
+        - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  # Felix VSC9959 (NXP LS1028A)
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pcie { /* Integrated Endpoint Root Complex */
+        #address-cells = <3>;
+        #size-cells = <2>;
+
+        ethernet-switch@0,5 {
+            compatible = "pci1957,eef0";
+            reg = <0x000500 0 0 0 0>;
+            interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy0>;
+                    managed = "in-band-status";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy1>;
+                    managed = "in-band-status";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy2>;
+                    managed = "in-band-status";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy3>;
+                    managed = "in-band-status";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    ethernet = <&enetc_port2>;
+                    phy-mode = "internal";
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+
+                port@5 {
+                    reg = <5>;
+                    ethernet = <&enetc_port3>;
+                    phy-mode = "internal";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
+  # Seville VSC9953 (NXP T1040)
+  - |
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ethernet-switch@800000 {
+            compatible = "mscc,vsc9953-switch";
+            reg = <0x800000 0x290000>;
+            little-endian;
+
+            ethernet-ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy0>;
+                    managed = "in-band-status";
+                };
+
+                port@1 {
+                    reg = <1>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy1>;
+                    managed = "in-band-status";
+                };
+
+                port@2 {
+                    reg = <2>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy2>;
+                    managed = "in-band-status";
+                };
+
+                port@3 {
+                    reg = <3>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy3>;
+                    managed = "in-band-status";
+                };
+
+                port@4 {
+                    reg = <4>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy4>;
+                    managed = "in-band-status";
+                };
+
+                port@5 {
+                    reg = <5>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy5>;
+                    managed = "in-band-status";
+                };
+
+                port@6 {
+                    reg = <6>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy6>;
+                    managed = "in-band-status";
+                };
+
+                port@7 {
+                    reg = <7>;
+                    phy-mode = "qsgmii";
+                    phy-handle = <&phy7>;
+                    managed = "in-band-status";
+                };
+
+                port@8 {
+                    reg = <8>;
+                    phy-mode = "internal";
+                    ethernet = <&enet0>;
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+
+                port@9 {
+                    reg = <9>;
+                    phy-mode = "internal";
+                    ethernet = <&enet1>;
+
+                    fixed-link {
+                        speed = <2500>;
+                        full-duplex;
+                        pause;
+                    };
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
deleted file mode 100644
index 18247ebfc487..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ /dev/null
@@ -1,327 +0,0 @@
-Mediatek MT7530 Ethernet switch
-================================
-
-Required properties:
-
-- compatible: may be compatible = "mediatek,mt7530"
-	or compatible = "mediatek,mt7621"
-	or compatible = "mediatek,mt7531"
-- #address-cells: Must be 1.
-- #size-cells: Must be 0.
-- mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
-	on multi-chip module belong to MT7623A has or the remotely standalone
-	chip as the function MT7623N reference board provided for.
-
-If compatible mediatek,mt7530 is set then the following properties are required
-
-- core-supply: Phandle to the regulator node necessary for the core power.
-- io-supply: Phandle to the regulator node necessary for the I/O power.
-	See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
-	for details for the regulator setup on these boards.
-
-If the property mediatek,mcm isn't defined, following property is required
-
-- reset-gpios: Should be a gpio specifier for a reset line.
-
-Else, following properties are required
-
-- resets : Phandle pointing to the system reset controller with
-	line index for the ethsys.
-- reset-names : Should be set to "mcm".
-
-Required properties for the child nodes within ports container:
-
-- reg: Port address described must be 6 for CPU port and from 0 to 5 for
-	user ports.
-- phy-mode: String, the following values are acceptable for port labeled
-	"cpu":
-	If compatible mediatek,mt7530 or mediatek,mt7621 is set,
-	must be either "trgmii" or "rgmii"
-	If compatible mediatek,mt7531 is set,
-	must be either "sgmii", "1000base-x" or "2500base-x"
-
-Port 5 of mt7530 and mt7621 switch is muxed between:
-1. GMAC5: GMAC5 can interface with another external MAC or PHY.
-2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC
-   of the SOC. Used in many setups where port 0/4 becomes the WAN port.
-   Note: On a MT7621 SOC with integrated switch: 2nd GMAC can only connected to
-	 GMAC5 when the gpios for RGMII2 (GPIO 22-33) are not used and not
-	 connected to external component!
-
-Port 5 modes/configurations:
-1. Port 5 is disabled and isolated: An external phy can interface to the 2nd
-   GMAC of the SOC.
-   In the case of a build-in MT7530 switch, port 5 shares the RGMII bus with 2nd
-   GMAC and an optional external phy. Mind the GPIO/pinctl settings of the SOC!
-2. Port 5 is muxed to PHY of port 0/4: Port 0/4 interfaces with 2nd GMAC.
-   It is a simple MAC to PHY interface, port 5 needs to be setup for xMII mode
-   and RGMII delay.
-3. Port 5 is muxed to GMAC5 and can interface to an external phy.
-   Port 5 becomes an extra switch port.
-   Only works on platform where external phy TX<->RX lines are swapped.
-   Like in the Ubiquiti ER-X-SFP.
-4. Port 5 is muxed to GMAC5 and interfaces with the 2nd GAMC as 2nd CPU port.
-   Currently a 2nd CPU port is not supported by DSA code.
-
-Depending on how the external PHY is wired:
-1. normal: The PHY can only connect to 2nd GMAC but not to the switch
-2. swapped: RGMII TX, RX are swapped; external phy interface with the switch as
-   a ethernet port. But can't interface to the 2nd GMAC.
-
-Based on the DT the port 5 mode is configured.
-
-Driver tries to lookup the phy-handle of the 2nd GMAC of the master device.
-When phy-handle matches PHY of port 0 or 4 then port 5 set-up as mode 2.
-phy-mode must be set, see also example 2 below!
- * mt7621: phy-mode = "rgmii-txid";
- * mt7623: phy-mode = "rgmii";
-
-Optional properties:
-
-- gpio-controller: Boolean; if defined, MT7530's LED controller will run on
-	GPIO mode.
-- #gpio-cells: Must be 2 if gpio-controller is defined.
-- interrupt-controller: Boolean; Enables the internal interrupt controller.
-
-If interrupt-controller is defined, the following properties are required.
-
-- #interrupt-cells: Must be 1.
-- interrupts: Parent interrupt for the interrupt controller.
-
-See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
-required, optional properties and how the integrated switch subnodes must
-be specified.
-
-Example:
-
-	&mdio0 {
-		switch@0 {
-			compatible = "mediatek,mt7530";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			core-supply = <&mt6323_vpa_reg>;
-			io-supply = <&mt6323_vemc3v3_reg>;
-			reset-gpios = <&pio 33 0>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "wan";
-				};
-
-				port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "trgmii";
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
-
-Example 2: MT7621: Port 4 is WAN port: 2nd GMAC -> Port 5 -> PHY port 4.
-
-&eth {
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "rgmii";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
-		};
-	};
-
-	gmac1: mac@1 {
-		compatible = "mediatek,eth-mac";
-		reg = <1>;
-		phy-mode = "rgmii-txid";
-		phy-handle = <&phy4>;
-	};
-
-	mdio: mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Internal phy */
-		phy4: ethernet-phy@4 {
-			reg = <4>;
-		};
-
-		mt7530: switch@1f {
-			compatible = "mediatek,mt7621";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1f>;
-			pinctrl-names = "default";
-			mediatek,mcm;
-
-			resets = <&rstctrl 2>;
-			reset-names = "mcm";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-/* Commented out. Port 4 is handled by 2nd GMAC.
-				port@4 {
-					reg = <4>;
-					label = "lan4";
-				};
-*/
-
-				cpu_port0: port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "rgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-						pause;
-					};
-				};
-			};
-		};
-	};
-};
-
-Example 3: MT7621: Port 5 is connected to external PHY: Port 5 -> external PHY.
-
-&eth {
-	gmac0: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-mode = "rgmii";
-
-		fixed-link {
-			speed = <1000>;
-			full-duplex;
-			pause;
-		};
-	};
-
-	mdio: mdio-bus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* External phy */
-		ephy5: ethernet-phy@7 {
-			reg = <7>;
-		};
-
-		mt7530: switch@1f {
-			compatible = "mediatek,mt7621";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x1f>;
-			pinctrl-names = "default";
-			mediatek,mcm;
-
-			resets = <&rstctrl 2>;
-			reset-names = "mcm";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "lan0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "lan4";
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "lan5";
-					phy-mode = "rgmii";
-					phy-handle = <&ephy5>;
-				};
-
-				cpu_port0: port@6 {
-					reg = <6>;
-					label = "cpu";
-					ethernet = <&gmac0>;
-					phy-mode = "rgmii";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-						pause;
-					};
-				};
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
index f978f8719d8e..9a64ed658745 100644
--- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/dsa/nxp,sja1105.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP SJA1105 Automotive Ethernet Switch Family Device Tree Bindings
+title: NXP SJA1105 Automotive Ethernet Switch Family
 
 description:
   The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944.pdf) of at
@@ -13,7 +13,8 @@ description:
   depends on the SPI bus master driver.
 
 allOf:
-  - $ref: "dsa.yaml#"
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 maintainers:
   - Vladimir Oltean <vladimir.oltean@nxp.com>
@@ -52,10 +53,8 @@ properties:
 
     patternProperties:
       "^mdio@[0-1]$":
-        type: object
-
-        allOf:
-          - $ref: "http://devicetree.org/schemas/net/mdio.yaml#"
+        $ref: /schemas/net/mdio.yaml#
+        unevaluatedProperties: false
 
         properties:
           compatible:
@@ -74,10 +73,42 @@ properties:
           - compatible
           - reg
 
+patternProperties:
+  "^(ethernet-)?ports$":
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        allOf:
+          - if:
+              properties:
+                phy-mode:
+                  contains:
+                    enum:
+                      - rgmii
+                      - rgmii-rxid
+                      - rgmii-txid
+                      - rgmii-id
+            then:
+              properties:
+                rx-internal-delay-ps:
+                  $ref: "#/$defs/internal-delay-ps"
+                tx-internal-delay-ps:
+                  $ref: "#/$defs/internal-delay-ps"
+
 required:
   - compatible
   - reg
 
+$defs:
+  internal-delay-ps:
+    description:
+      Disable tunable delay lines using 0 ps, or enable them and select
+      the phase between 1640 ps (73.8 degree shift at 1Gbps) and 2260 ps
+      (101.7 degree shift) in increments of 0.9 degrees (20 ps).
+    enum:
+      [0, 1640, 1660, 1680, 1700, 1720, 1740, 1760, 1780, 1800, 1820, 1840,
+       1860, 1880, 1900, 1920, 1940, 1960, 1980, 2000, 2020, 2040, 2060, 2080,
+       2100, 2120, 2140, 2160, 2180, 2200, 2220, 2240, 2260]
+
 unevaluatedProperties: false
 
 examples:
@@ -97,29 +128,40 @@ examples:
                             port@0 {
                                     phy-handle = <&rgmii_phy6>;
                                     phy-mode = "rgmii-id";
+                                    rx-internal-delay-ps = <0>;
+                                    tx-internal-delay-ps = <0>;
                                     reg = <0>;
                             };
 
                             port@1 {
                                     phy-handle = <&rgmii_phy3>;
                                     phy-mode = "rgmii-id";
+                                    rx-internal-delay-ps = <0>;
+                                    tx-internal-delay-ps = <0>;
                                     reg = <1>;
                             };
 
                             port@2 {
                                     phy-handle = <&rgmii_phy4>;
                                     phy-mode = "rgmii-id";
+                                    rx-internal-delay-ps = <0>;
+                                    tx-internal-delay-ps = <0>;
                                     reg = <2>;
                             };
 
                             port@3 {
+                                    phy-handle = <&rgmii_phy4>;
                                     phy-mode = "rgmii-id";
+                                    rx-internal-delay-ps = <0>;
+                                    tx-internal-delay-ps = <0>;
                                     reg = <3>;
                             };
 
                             port@4 {
                                     ethernet = <&enet2>;
                                     phy-mode = "rgmii";
+                                    rx-internal-delay-ps = <0>;
+                                    tx-internal-delay-ps = <0>;
                                     reg = <4>;
 
                                     fixed-link {
diff --git a/Documentation/devicetree/bindings/net/dsa/ocelot.txt b/Documentation/devicetree/bindings/net/dsa/ocelot.txt
deleted file mode 100644
index 7a271d070b72..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/ocelot.txt
+++ /dev/null
@@ -1,213 +0,0 @@
-Microchip Ocelot switch driver family
-=====================================
-
-Felix
------
-
-Currently the switches supported by the felix driver are:
-
-- VSC9959 (Felix)
-- VSC9953 (Seville)
-
-The VSC9959 switch is found in the NXP LS1028A. It is a PCI device, part of the
-larger ENETC root complex. As a result, the ethernet-switch node is a sub-node
-of the PCIe root complex node and its "reg" property conforms to the parent
-node bindings:
-
-* reg: Specifies PCIe Device Number and Function Number of the endpoint device,
-  in this case for the Ethernet L2Switch it is PF5 (of device 0, bus 0).
-
-It does not require a "compatible" string.
-
-The interrupt line is used to signal availability of PTP TX timestamps and for
-TSN frame preemption.
-
-For the external switch ports, depending on board configuration, "phy-mode" and
-"phy-handle" are populated by board specific device tree instances. Ports 4 and
-5 are fixed as internal ports in the NXP LS1028A instantiation.
-
-The CPU port property ("ethernet") configures the feature called "NPI port" in
-the Ocelot hardware core. The CPU port in Ocelot is a set of queues, which are
-connected, in the Node Processor Interface (NPI) mode, to an Ethernet port.
-By default, in fsl-ls1028a.dtsi, the NPI port is assigned to the internal
-2.5Gbps port@4, but can be moved to the 1Gbps port@5, depending on the specific
-use case.  Moving the NPI port to an external switch port is hardware possible,
-but there is no platform support for the Linux system on the LS1028A chip to
-operate as an entire slave DSA chip.  NPI functionality (and therefore DSA
-tagging) is supported on a single port at a time.
-
-Any port can be disabled (and in fsl-ls1028a.dtsi, they are indeed all disabled
-by default, and should be enabled on a per-board basis). But if any external
-switch port is enabled at all, the ENETC PF2 (enetc_port2) should be enabled as
-well, regardless of whether it is configured as the DSA master or not. This is
-because the Felix PHYLINK implementation accesses the MAC PCS registers, which
-in hardware truly belong to the ENETC port #2 and not to Felix.
-
-Supported PHY interface types (appropriate SerDes protocol setting changes are
-needed in the RCW binary):
-
-* phy_mode = "internal": on ports 4 and 5
-* phy_mode = "sgmii": on ports 0, 1, 2, 3
-* phy_mode = "qsgmii": on ports 0, 1, 2, 3
-* phy_mode = "usxgmii": on ports 0, 1, 2, 3
-* phy_mode = "2500base-x": on ports 0, 1, 2, 3
-
-For the rest of the device tree binding definitions, which are standard DSA and
-PCI, refer to the following documents:
-
-Documentation/devicetree/bindings/net/dsa/dsa.txt
-Documentation/devicetree/bindings/pci/pci.txt
-
-Example:
-
-&soc {
-	pcie@1f0000000 { /* Integrated Endpoint Root Complex */
-		ethernet-switch@0,5 {
-			reg = <0x000500 0 0 0 0>;
-			/* IEP INT_B */
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				/* External ports */
-				port@0 {
-					reg = <0>;
-					label = "swp0";
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "swp1";
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "swp2";
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "swp3";
-				};
-
-				/* Tagging CPU port */
-				port@4 {
-					reg = <4>;
-					ethernet = <&enetc_port2>;
-					phy-mode = "internal";
-
-					fixed-link {
-						speed = <2500>;
-						full-duplex;
-					};
-				};
-
-				/* Non-tagging CPU port */
-				port@5 {
-					reg = <5>;
-					phy-mode = "internal";
-					status = "disabled";
-
-					fixed-link {
-						speed = <1000>;
-						full-duplex;
-					};
-				};
-			};
-		};
-	};
-};
-
-The VSC9953 switch is found inside NXP T1040. It is a platform device with the
-following required properties:
-
-- compatible:
-	Must be "mscc,vsc9953-switch".
-
-Supported PHY interface types (appropriate SerDes protocol setting changes are
-needed in the RCW binary):
-
-* phy_mode = "internal": on ports 8 and 9
-* phy_mode = "sgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
-* phy_mode = "qsgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
-
-Example:
-
-&soc {
-	ethernet-switch@800000 {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		compatible = "mscc,vsc9953-switch";
-		little-endian;
-		reg = <0x800000 0x290000>;
-
-		ports {
-			#address-cells = <0x1>;
-			#size-cells = <0x0>;
-
-			port@0 {
-				reg = <0x0>;
-				label = "swp0";
-			};
-
-			port@1 {
-				reg = <0x1>;
-				label = "swp1";
-			};
-
-			port@2 {
-				reg = <0x2>;
-				label = "swp2";
-			};
-
-			port@3 {
-				reg = <0x3>;
-				label = "swp3";
-			};
-
-			port@4 {
-				reg = <0x4>;
-				label = "swp4";
-			};
-
-			port@5 {
-				reg = <0x5>;
-				label = "swp5";
-			};
-
-			port@6 {
-				reg = <0x6>;
-				label = "swp6";
-			};
-
-			port@7 {
-				reg = <0x7>;
-				label = "swp7";
-			};
-
-			port@8 {
-				reg = <0x8>;
-				phy-mode = "internal";
-				ethernet = <&enet0>;
-
-				fixed-link {
-					speed = <2500>;
-					full-duplex;
-				};
-			};
-
-			port@9 {
-				reg = <0x9>;
-				phy-mode = "internal";
-				status = "disabled";
-
-				fixed-link {
-					speed = <2500>;
-					full-duplex;
-				};
-			};
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.txt b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
deleted file mode 100644
index 8c73f67c43ca..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
+++ /dev/null
@@ -1,215 +0,0 @@
-* Qualcomm Atheros QCA8xxx switch family
-
-Required properties:
-
-- compatible: should be one of:
-    "qca,qca8327"
-    "qca,qca8334"
-    "qca,qca8337"
-
-- #size-cells: must be 0
-- #address-cells: must be 1
-
-Optional properties:
-
-- reset-gpios: GPIO to be used to reset the whole device
-
-Subnodes:
-
-The integrated switch subnode should be specified according to the binding
-described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external
-mdio-bus each subnode describing a port needs to have a valid phandle
-referencing the internal PHY it is connected to. This is because there's no
-N:N mapping of port and PHY id.
-To declare the internal mdio-bus configuration, declare a mdio node in the
-switch node and declare the phandle for the port referencing the internal
-PHY is connected to. In this config a internal mdio-bus is registered and
-the mdio MASTER is used as communication.
-
-Don't use mixed external and internal mdio-bus configurations, as this is
-not supported by the hardware.
-
-The CPU port of this switch is always port 0.
-
-A CPU port node has the following optional node:
-
-- fixed-link            : Fixed-link subnode describing a link to a non-MDIO
-                          managed entity. See
-                          Documentation/devicetree/bindings/net/fixed-link.txt
-                          for details.
-
-For QCA8K the 'fixed-link' sub-node supports only the following properties:
-
-- 'speed' (integer, mandatory), to indicate the link speed. Accepted
-  values are 10, 100 and 1000
-- 'full-duplex' (boolean, optional), to indicate that full duplex is
-  used. When absent, half duplex is assumed.
-
-Examples:
-
-for the external mdio-bus configuration:
-
-	&mdio0 {
-		phy_port1: phy@0 {
-			reg = <0>;
-		};
-
-		phy_port2: phy@1 {
-			reg = <1>;
-		};
-
-		phy_port3: phy@2 {
-			reg = <2>;
-		};
-
-		phy_port4: phy@3 {
-			reg = <3>;
-		};
-
-		phy_port5: phy@4 {
-			reg = <4>;
-		};
-
-		switch@10 {
-			compatible = "qca,qca8337";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
-			reg = <0x10>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				port@0 {
-					reg = <0>;
-					label = "cpu";
-					ethernet = <&gmac1>;
-					phy-mode = "rgmii";
-					fixed-link {
-						speed = 1000;
-						full-duplex;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-					phy-handle = <&phy_port1>;
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-					phy-handle = <&phy_port2>;
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-					phy-handle = <&phy_port3>;
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "lan4";
-					phy-handle = <&phy_port4>;
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "wan";
-					phy-handle = <&phy_port5>;
-				};
-			};
-		};
-	};
-
-for the internal master mdio-bus configuration:
-
-	&mdio0 {
-		switch@10 {
-			compatible = "qca,qca8337";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
-			reg = <0x10>;
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					label = "cpu";
-					ethernet = <&gmac1>;
-					phy-mode = "rgmii";
-					fixed-link {
-						speed = 1000;
-						full-duplex;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					label = "lan1";
-					phy-mode = "internal";
-					phy-handle = <&phy_port1>;
-				};
-
-				port@2 {
-					reg = <2>;
-					label = "lan2";
-					phy-mode = "internal";
-					phy-handle = <&phy_port2>;
-				};
-
-				port@3 {
-					reg = <3>;
-					label = "lan3";
-					phy-mode = "internal";
-					phy-handle = <&phy_port3>;
-				};
-
-				port@4 {
-					reg = <4>;
-					label = "lan4";
-					phy-mode = "internal";
-					phy-handle = <&phy_port4>;
-				};
-
-				port@5 {
-					reg = <5>;
-					label = "wan";
-					phy-mode = "internal";
-					phy-handle = <&phy_port5>;
-				};
-			};
-
-			mdio {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				phy_port1: phy@0 {
-					reg = <0>;
-				};
-
-				phy_port2: phy@1 {
-					reg = <1>;
-				};
-
-				phy_port3: phy@2 {
-					reg = <2>;
-				};
-
-				phy_port4: phy@3 {
-					reg = <3>;
-				};
-
-				phy_port5: phy@4 {
-					reg = <4>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
new file mode 100644
index 000000000000..df64eebebe18
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
@@ -0,0 +1,320 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/qca8k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros QCA83xx switch family
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+description:
+  If the QCA8K switch is connect to an SoC's external mdio-bus, each subnode
+  describing a port needs to have a valid phandle referencing the internal PHY
+  it is connected to. This is because there is no N:N mapping of port and PHY
+  ID. To declare the internal mdio-bus configuration, declare an MDIO node in
+  the switch node and declare the phandle for the port, referencing the internal
+  PHY it is connected to. In this config, an internal mdio-bus is registered and
+  the MDIO master is used for communication. Mixed external and internal
+  mdio-bus configurations are not supported by the hardware.
+  Each phy has at most 3 LEDs connected and can be declared
+  using the standard LEDs structure.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qca,qca8327
+          - qca,qca8328
+          - qca,qca8334
+          - qca,qca8337
+    description: |
+      qca,qca8328: referenced as AR8328(N)-AK1(A/B) QFN 176 pin package
+      qca,qca8327: referenced as AR8327(N)-AL1A DR-QFN 148 pin package
+      qca,qca8334: referenced as QCA8334-AL3C QFN 88 pin package
+      qca,qca8337: referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO to be used to reset the whole device
+    maxItems: 1
+
+  qca,ignore-power-on-sel:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Ignore power-on pin strapping to configure LED open-drain or EEPROM
+      presence. This is needed for devices with incorrect configuration or when
+      the OEM has decided not to use pin strapping and falls back to SW regs.
+
+  qca,led-open-drain:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set LEDs to open-drain mode. This requires the qca,ignore-power-on-sel to
+      be set, otherwise the driver will fail at probe. This is required if the
+      OEM does not use pin strapping to set this mode and prefers to set it
+      using SW regs. The pin strappings related to LED open-drain mode are
+      B68 on the QCA832x and B49 on the QCA833x.
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+    description: Qca8k switch have an internal mdio to access switch port.
+                 If this is not present, the legacy mapping is used and the
+                 internal mdio access is used.
+                 With the legacy mapping the reg corresponding to the internal
+                 mdio is the switch reg with an offset of -1.
+
+$ref: dsa.yaml#
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    type: object
+    patternProperties:
+      "^(ethernet-)?port@[0-6]$":
+        type: object
+        description: Ethernet switch ports
+
+        $ref: dsa-port.yaml#
+
+        properties:
+          qca,sgmii-rxclk-falling-edge:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Set the receive clock phase to falling edge. Mostly commonly used on
+              the QCA8327 with CPU port 0 set to SGMII.
+
+          qca,sgmii-txclk-falling-edge:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Set the transmit clock phase to falling edge.
+
+          qca,sgmii-enable-pll:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              For SGMII CPU port, explicitly enable PLL, TX and RX chain along with
+              Signal Detection. On the QCA8327 this should not be enabled, otherwise
+              the SGMII port will not initialize. When used on the QCA8337, revision 3
+              or greater, a warning will be displayed. When the CPU port is set to
+              SGMII on the QCA8337, it is advised to set this unless a communication
+              issue is observed.
+
+        unevaluatedProperties: false
+
+oneOf:
+  - required:
+      - ports
+  - required:
+      - ethernet-ports
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        external_phy_port1: ethernet-phy@0 {
+            reg = <0>;
+        };
+
+        external_phy_port2: ethernet-phy@1 {
+            reg = <1>;
+        };
+
+        external_phy_port3: ethernet-phy@2 {
+            reg = <2>;
+        };
+
+        external_phy_port4: ethernet-phy@3 {
+            reg = <3>;
+        };
+
+        external_phy_port5: ethernet-phy@4 {
+            reg = <4>;
+        };
+
+        switch@10 {
+            compatible = "qca,qca8337";
+            reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+            reg = <0x10>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    ethernet = <&gmac1>;
+                    phy-mode = "rgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan1";
+                    phy-handle = <&external_phy_port1>;
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan2";
+                    phy-handle = <&external_phy_port2>;
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan3";
+                    phy-handle = <&external_phy_port3>;
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "lan4";
+                    phy-handle = <&external_phy_port4>;
+                };
+
+                port@5 {
+                    reg = <5>;
+                    label = "wan";
+                    phy-handle = <&external_phy_port5>;
+                };
+            };
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        switch@10 {
+            compatible = "qca,qca8337";
+            reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
+            reg = <0x10>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    ethernet = <&gmac1>;
+                    phy-mode = "rgmii";
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    label = "lan1";
+                    phy-mode = "internal";
+                    phy-handle = <&internal_phy_port1>;
+
+                    leds {
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        led@0 {
+                            reg = <0>;
+                            color = <LED_COLOR_ID_WHITE>;
+                            function = LED_FUNCTION_LAN;
+                            default-state = "keep";
+                        };
+
+                        led@1 {
+                            reg = <1>;
+                            color = <LED_COLOR_ID_AMBER>;
+                            function = LED_FUNCTION_LAN;
+                            default-state = "keep";
+                        };
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+                    label = "lan2";
+                    phy-mode = "internal";
+                    phy-handle = <&internal_phy_port2>;
+                };
+
+                port@3 {
+                    reg = <3>;
+                    label = "lan3";
+                    phy-mode = "internal";
+                    phy-handle = <&internal_phy_port3>;
+                };
+
+                port@4 {
+                    reg = <4>;
+                    label = "lan4";
+                    phy-mode = "internal";
+                    phy-handle = <&internal_phy_port4>;
+                };
+
+                port@5 {
+                    reg = <5>;
+                    label = "wan";
+                    phy-mode = "internal";
+                    phy-handle = <&internal_phy_port5>;
+                };
+
+                port@6 {
+                    reg = <0>;
+                    ethernet = <&gmac1>;
+                    phy-mode = "sgmii";
+
+                    qca,sgmii-rxclk-falling-edge;
+
+                    fixed-link {
+                        speed = <1000>;
+                        full-duplex;
+                    };
+                };
+            };
+
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                internal_phy_port1: ethernet-phy@0 {
+                    reg = <0>;
+                };
+
+                internal_phy_port2: ethernet-phy@1 {
+                    reg = <1>;
+                };
+
+                internal_phy_port3: ethernet-phy@2 {
+                    reg = <2>;
+                };
+
+                internal_phy_port4: ethernet-phy@3 {
+                    reg = <3>;
+                };
+
+                internal_phy_port5: ethernet-phy@4 {
+                    reg = <4>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
deleted file mode 100644
index b6ae8541bd55..000000000000
--- a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
+++ /dev/null
@@ -1,153 +0,0 @@
-Realtek SMI-based Switches
-==========================
-
-The SMI "Simple Management Interface" is a two-wire protocol using
-bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does
-not use the MDIO protocol. This binding defines how to specify the
-SMI-based Realtek devices.
-
-Required properties:
-
-- compatible: must be exactly one of:
-      "realtek,rtl8366"
-      "realtek,rtl8366rb" (4+1 ports)
-      "realtek,rtl8366s"  (4+1 ports)
-      "realtek,rtl8367"
-      "realtek,rtl8367b"
-      "realtek,rtl8368s"  (8 port)
-      "realtek,rtl8369"
-      "realtek,rtl8370"   (8 port)
-
-Required properties:
-- mdc-gpios: GPIO line for the MDC clock line.
-- mdio-gpios: GPIO line for the MDIO data line.
-- reset-gpios: GPIO line for the reset signal.
-
-Optional properties:
-- realtek,disable-leds: if the LED drivers are not used in the
-  hardware design this will disable them so they are not turned on
-  and wasting power.
-
-Required subnodes:
-
-- interrupt-controller
-
-  This defines an interrupt controller with an IRQ line (typically
-  a GPIO) that will demultiplex and handle the interrupt from the single
-  interrupt line coming out of one of the SMI-based chips. It most
-  importantly provides link up/down interrupts to the PHY blocks inside
-  the ASIC.
-
-Required properties of interrupt-controller:
-
-- interrupt: parent interrupt, see interrupt-controller/interrupts.txt
-- interrupt-controller: see interrupt-controller/interrupts.txt
-- #address-cells: should be <0>
-- #interrupt-cells: should be <1>
-
-- mdio
-
-  This defines the internal MDIO bus of the SMI device, mostly for the
-  purpose of being able to hook the interrupts to the right PHY and
-  the right PHY to the corresponding port.
-
-Required properties of mdio:
-
-- compatible: should be set to "realtek,smi-mdio" for all SMI devices
-
-See net/mdio.txt for additional MDIO bus properties.
-
-See net/dsa/dsa.txt for a list of additional required and optional properties
-and subnodes of DSA switches.
-
-Examples:
-
-switch {
-	compatible = "realtek,rtl8366rb";
-	/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
-	mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-	mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-	reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-
-	switch_intc: interrupt-controller {
-		/* GPIO 15 provides the interrupt */
-		interrupt-parent = <&gpio0>;
-		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-	};
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0>;
-		port@0 {
-			reg = <0>;
-			label = "lan0";
-			phy-handle = <&phy0>;
-		};
-		port@1 {
-			reg = <1>;
-			label = "lan1";
-			phy-handle = <&phy1>;
-		};
-		port@2 {
-			reg = <2>;
-			label = "lan2";
-			phy-handle = <&phy2>;
-		};
-		port@3 {
-			reg = <3>;
-			label = "lan3";
-			phy-handle = <&phy3>;
-		};
-		port@4 {
-			reg = <4>;
-			label = "wan";
-			phy-handle = <&phy4>;
-		};
-		port@5 {
-			reg = <5>;
-			label = "cpu";
-			ethernet = <&gmac0>;
-			phy-mode = "rgmii";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-	};
-
-	mdio {
-		compatible = "realtek,smi-mdio", "dsa-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: phy@0 {
-			reg = <0>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <0>;
-		};
-		phy1: phy@1 {
-			reg = <1>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <1>;
-		};
-		phy2: phy@2 {
-			reg = <2>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <2>;
-		};
-		phy3: phy@3 {
-			reg = <3>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <3>;
-		};
-		phy4: phy@4 {
-			reg = <4>;
-			interrupt-parent = <&switch_intc>;
-			interrupts = <12>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
new file mode 100644
index 000000000000..cfd69c2604ea
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
@@ -0,0 +1,386 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/realtek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek switches for unmanaged switches
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  Realtek advertises these chips as fast/gigabit switches or unmanaged
+  switches. They can be controlled using different interfaces, like SMI,
+  MDIO or SPI.
+
+  The SMI "Simple Management Interface" is a two-wire protocol using
+  bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does
+  not use the MDIO protocol. This binding defines how to specify the
+  SMI-based Realtek devices. The realtek-smi driver is a platform driver
+  and it must be inserted inside a platform node.
+
+  The MDIO-connected switches use MDIO protocol to access their registers.
+  The realtek-mdio driver is an MDIO driver and it must be inserted inside
+  an MDIO node.
+
+  The compatible string is only used to identify which (silicon) family the
+  switch belongs to. Roughly speaking, a family is any set of Realtek switches
+  whose chip identification register(s) have a common location and semantics.
+  The different models in a given family can be automatically disambiguated by
+  parsing the chip identification register(s) according to the given family,
+  avoiding the need for a unique compatible string for each model.
+
+properties:
+  compatible:
+    enum:
+      - realtek,rtl8365mb
+      - realtek,rtl8366rb
+    description: |
+      realtek,rtl8365mb:
+        Use with models RTL8363NB, RTL8363NB-VB, RTL8363SC, RTL8363SC-VB,
+        RTL8364NB, RTL8364NB-VB, RTL8365MB, RTL8366SC, RTL8367RB-VB, RTL8367S,
+        RTL8367SB, RTL8370MB, RTL8310SR
+      realtek,rtl8366rb:
+        Use with models RTL8366RB, RTL8366S
+
+  mdc-gpios:
+    description: GPIO line for the MDC clock line.
+    maxItems: 1
+
+  mdio-gpios:
+    description: GPIO line for the MDIO data line.
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO to be used to reset the whole device
+    maxItems: 1
+
+  realtek,disable-leds:
+    type: boolean
+    description: |
+      if the LED drivers are not used in the hardware design,
+      this will disable them so they are not turned on
+      and wasting power.
+
+  interrupt-controller:
+    type: object
+    description: |
+      This defines an interrupt controller with an IRQ line (typically
+      a GPIO) that will demultiplex and handle the interrupt from the single
+      interrupt line coming out of one of the Realtek switch chips. It most
+      importantly provides link up/down interrupts to the PHY blocks inside
+      the ASIC.
+
+    properties:
+
+      interrupt-controller: true
+
+      interrupts:
+        maxItems: 1
+        description:
+          A single IRQ line from the switch, either active LOW or HIGH
+
+      '#address-cells':
+        const: 0
+
+      '#interrupt-cells':
+        const: 1
+
+    required:
+      - interrupt-controller
+      - '#address-cells'
+      - '#interrupt-cells'
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      compatible:
+        const: realtek,smi-mdio
+
+if:
+  required:
+    - reg
+
+then:
+  $ref: /schemas/spi/spi-peripheral-props.yaml#
+  not:
+    required:
+      - mdc-gpios
+      - mdio-gpios
+      - mdio
+
+  properties:
+    mdc-gpios: false
+    mdio-gpios: false
+    mdio: false
+
+else:
+  required:
+    - mdc-gpios
+    - mdio-gpios
+    - mdio
+    - reset-gpios
+
+required:
+  - compatible
+
+    #  - mdc-gpios
+    #  - mdio-gpios
+    #  - reset-gpios
+    #  - mdio
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    platform {
+            switch {
+                    compatible = "realtek,rtl8366rb";
+                    /* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
+                    mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+                    mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+
+                    switch_intc1: interrupt-controller {
+                            /* GPIO 15 provides the interrupt */
+                            interrupt-parent = <&gpio0>;
+                            interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+                            interrupt-controller;
+                            #address-cells = <0>;
+                            #interrupt-cells = <1>;
+                    };
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+                            port@0 {
+                                    reg = <0>;
+                                    label = "lan0";
+                                    phy-handle = <&phy0>;
+                            };
+                            port@1 {
+                                    reg = <1>;
+                                    label = "lan1";
+                                    phy-handle = <&phy1>;
+                            };
+                            port@2 {
+                                    reg = <2>;
+                                    label = "lan2";
+                                    phy-handle = <&phy2>;
+                            };
+                            port@3 {
+                                    reg = <3>;
+                                    label = "lan3";
+                                    phy-handle = <&phy3>;
+                            };
+                            port@4 {
+                                    reg = <4>;
+                                    label = "wan";
+                                    phy-handle = <&phy4>;
+                            };
+                            port@5 {
+                                    reg = <5>;
+                                    ethernet = <&gmac0>;
+                                    phy-mode = "rgmii";
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+                    };
+
+                    mdio {
+                            compatible = "realtek,smi-mdio";
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            phy0: ethernet-phy@0 {
+                                    reg = <0>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <0>;
+                            };
+                            phy1: ethernet-phy@1 {
+                                    reg = <1>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <1>;
+                            };
+                            phy2: ethernet-phy@2 {
+                                    reg = <2>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <2>;
+                            };
+                            phy3: ethernet-phy@3 {
+                                    reg = <3>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <3>;
+                            };
+                            phy4: ethernet-phy@4 {
+                                    reg = <4>;
+                                    interrupt-parent = <&switch_intc1>;
+                                    interrupts = <12>;
+                            };
+                    };
+            };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    platform {
+            switch {
+                    compatible = "realtek,rtl8365mb";
+                    mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+                    mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+                    reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+
+                    switch_intc2: interrupt-controller {
+                            interrupt-parent = <&gpio5>;
+                            interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+                            interrupt-controller;
+                            #address-cells = <0>;
+                            #interrupt-cells = <1>;
+                    };
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+                            port@0 {
+                                    reg = <0>;
+                                    label = "swp0";
+                                    phy-handle = <&ethphy0>;
+                            };
+                            port@1 {
+                                    reg = <1>;
+                                    label = "swp1";
+                                    phy-handle = <&ethphy1>;
+                            };
+                            port@2 {
+                                    reg = <2>;
+                                    label = "swp2";
+                                    phy-handle = <&ethphy2>;
+                            };
+                            port@3 {
+                                    reg = <3>;
+                                    label = "swp3";
+                                    phy-handle = <&ethphy3>;
+                            };
+                            port@6 {
+                                    reg = <6>;
+                                    ethernet = <&fec1>;
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <2000>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                            pause;
+                                    };
+                            };
+                    };
+
+                    mdio {
+                            compatible = "realtek,smi-mdio";
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            ethphy0: ethernet-phy@0 {
+                                    reg = <0>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <0>;
+                            };
+                            ethphy1: ethernet-phy@1 {
+                                    reg = <1>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <1>;
+                            };
+                            ethphy2: ethernet-phy@2 {
+                                    reg = <2>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <2>;
+                            };
+                            ethphy3: ethernet-phy@3 {
+                                    reg = <3>;
+                                    interrupt-parent = <&switch_intc2>;
+                                    interrupts = <3>;
+                            };
+                    };
+            };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            switch@29 {
+                    compatible = "realtek,rtl8365mb";
+                    reg = <29>;
+
+                    reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+
+                    switch_intc3: interrupt-controller {
+                            interrupt-parent = <&gpio0>;
+                            interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+                            interrupt-controller;
+                            #address-cells = <0>;
+                            #interrupt-cells = <1>;
+                    };
+
+                    ports {
+                            #address-cells = <1>;
+                            #size-cells = <0>;
+
+                            port@0 {
+                                    reg = <0>;
+                                    label = "lan4";
+                            };
+
+                            port@1 {
+                                    reg = <1>;
+                                    label = "lan3";
+                            };
+
+                            port@2 {
+                                    reg = <2>;
+                                    label = "lan2";
+                            };
+
+                            port@3 {
+                                    reg = <3>;
+                                    label = "lan1";
+                            };
+
+                            port@4 {
+                                    reg = <4>;
+                                    label = "wan";
+                            };
+
+                            port@7 {
+                                    reg = <7>;
+                                    ethernet = <&ethernet>;
+                                    phy-mode = "rgmii";
+                                    tx-internal-delay-ps = <2000>;
+                                    rx-internal-delay-ps = <0>;
+
+                                    fixed-link {
+                                            speed = <1000>;
+                                            full-duplex;
+                                    };
+                            };
+                    };
+            };
+      };
diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
new file mode 100644
index 000000000000..833d2f68daa1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/renesas,rzn1-a5psw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 Advanced 5 ports ethernet switch
+
+maintainers:
+  - Clément Léger <clement.leger@bootlin.com>
+
+description: |
+  The advanced 5 ports switch is present on the Renesas RZ/N1 SoC family and
+  handles 4 ports + 1 CPU management port.
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-a5psw
+      - const: renesas,rzn1-a5psw
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Device Level Ring (DLR) interrupt
+      - description: Switch interrupt
+      - description: Parallel Redundancy Protocol (PRP) interrupt
+      - description: Integrated HUB module interrupt
+      - description: Receive Pattern Match interrupt
+
+  interrupt-names:
+    items:
+      - const: dlr
+      - const: switch
+      - const: prp
+      - const: hub
+      - const: ptrn
+
+  power-domains:
+    maxItems: 1
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+  clocks:
+    items:
+      - description: AHB clock used for the switch register interface
+      - description: Switch system clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: clk
+
+  ethernet-ports:
+    type: object
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^(ethernet-)?port@[0-4]$":
+        type: object
+        description: Ethernet switch ports
+
+        properties:
+          pcs-handle:
+            maxItems: 1
+            description:
+              phandle pointing to a PCS sub-node compatible with
+              renesas,rzn1-miic.yaml#
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    switch@44050000 {
+        compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw";
+        reg = <0x44050000 0x10000>;
+        clocks = <&sysctrl R9A06G032_HCLK_SWITCH>, <&sysctrl R9A06G032_CLK_SWITCH>;
+        clock-names = "hclk", "clk";
+        power-domains = <&sysctrl>;
+        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "dlr", "switch", "prp", "hub", "ptrn";
+
+        dsa,member = <0 0>;
+
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                label = "lan0";
+                phy-handle = <&switch0phy3>;
+                pcs-handle = <&mii_conv4>;
+            };
+
+            port@1 {
+                reg = <1>;
+                label = "lan1";
+                phy-handle = <&switch0phy1>;
+                pcs-handle = <&mii_conv3>;
+            };
+
+            port@4 {
+                reg = <4>;
+                ethernet = <&gmac2>;
+                phy-mode = "internal";
+
+                fixed-link {
+                  speed = <1000>;
+                  full-duplex;
+                };
+            };
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reset-gpios = <&gpio0a 2 GPIO_ACTIVE_HIGH>;
+            reset-delay-us = <15>;
+            clock-frequency = <2500000>;
+
+            switch0phy1: ethernet-phy@1{
+                reg = <1>;
+            };
+
+            switch0phy3: ethernet-phy@3{
+                reg = <3>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
index bbf4a13f6d75..258bef483673 100644
--- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
+++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.txt
@@ -75,7 +75,6 @@ switch@0 {
 		};
 		vsc: port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&gmac1>;
 			phy-mode = "rgmii";
 			fixed-link {
@@ -117,7 +116,6 @@ switch@2,0 {
 		};
 		vsc: port@6 {
 			reg = <6>;
-			label = "cpu";
 			ethernet = <&enet0>;
 			phy-mode = "rgmii";
 			fixed-link {
diff --git a/Documentation/devicetree/bindings/net/emac_rockchip.txt b/Documentation/devicetree/bindings/net/emac_rockchip.txt
deleted file mode 100644
index 05bd7dafce17..000000000000
--- a/Documentation/devicetree/bindings/net/emac_rockchip.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* ARC EMAC 10/100 Ethernet platform driver for Rockchip RK3036/RK3066/RK3188 SoCs
-
-Required properties:
-- compatible: should be "rockchip,<name>-emac"
-   "rockchip,rk3036-emac": found on RK3036 SoCs
-   "rockchip,rk3066-emac": found on RK3066 SoCs
-   "rockchip,rk3188-emac": found on RK3188 SoCs
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the EMAC interrupts
-- rockchip,grf: phandle to the syscon grf used to control speed and mode
-  for emac.
-- phy: see ethernet.txt file in the same directory.
-- phy-mode: see ethernet.txt file in the same directory.
-
-Optional properties:
-- phy-supply: phandle to a regulator if the PHY needs one
-
-Clock handling:
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Shall be "hclk" for the host clock needed to calculate and set
-  polling period of EMAC and "macref" for the reference clock needed to transfer
-  data to and from the phy.
-
-Child nodes of the driver are the individual PHY devices connected to the
-MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
-
-Examples:
-
-ethernet@10204000 {
-	compatible = "rockchip,rk3188-emac";
-	reg = <0xc0fc2000 0x3c>;
-	interrupts = <6>;
-	mac-address = [ 00 11 22 33 44 55 ];
-
-	clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
-	clock-names = "hclk", "macref";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
-
-	rockchip,grf = <&grf>;
-
-	phy = <&phy0>;
-	phy-mode = "rmii";
-	phy-supply = <&vcc_rmii>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	phy0: ethernet-phy@0 {
-	      reg = <1>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml
new file mode 100644
index 000000000000..82a5d7927ca4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/engleder,tsnep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TSN endpoint Ethernet MAC
+
+maintainers:
+  - Gerhard Engleder <gerhard@engleder-embedded.com>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: engleder,tsnep
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: mac
+      - const: txrx-1
+      - const: txrx-2
+      - const: txrx-3
+      - const: txrx-4
+      - const: txrx-5
+      - const: txrx-6
+      - const: txrx-7
+    description:
+      The main interrupt for basic MAC features and the first TX/RX queue pair
+      is named "mac". "txrx-[1-7]" are the interrupts for additional TX/RX
+      queue pairs.
+
+  dma-coherent: true
+
+  local-mac-address: true
+
+  mac-address: true
+
+  nvmem-cells: true
+
+  nvmem-cell-names: true
+
+  phy-connection-type:
+    enum:
+      - mii
+      - gmii
+      - rgmii
+      - rgmii-id
+
+  phy-mode: true
+
+  phy-handle: true
+
+  mdio:
+    type: object
+    $ref: mdio.yaml#
+    description: optional node for embedded MDIO controller
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    axi {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        tsnep0: ethernet@a0000000 {
+            compatible = "engleder,tsnep";
+            reg = <0x0 0xa0000000 0x0 0x10000>;
+            interrupts = <0 89 1>;
+            interrupt-parent = <&gic>;
+            local-mac-address = [00 00 00 00 00 00];
+            phy-mode = "rgmii";
+            phy-handle = <&phy0>;
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                suppress-preamble;
+                phy0: ethernet-phy@1 {
+                    reg = <1>;
+                    rxc-skew-ps = <1080>;
+                };
+            };
+        };
+
+        tsnep1: ethernet@a0010000 {
+            compatible = "engleder,tsnep";
+            reg = <0x0 0xa0010000 0x0 0x10000>;
+            interrupts = <0 93 1>, <0 94 1>, <0 95 1>, <0 96 1>;
+            interrupt-names = "mac", "txrx-1", "txrx-2", "txrx-3";
+            interrupt-parent = <&gic>;
+            local-mac-address = [00 00 00 00 00 00];
+            phy-mode = "rgmii";
+            phy-handle = <&phy1>;
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                suppress-preamble;
+                phy1: ethernet-phy@1 {
+                    reg = <1>;
+                    rxc-skew-ps = <1080>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index b0933a8c295a..6b0d359367da 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/ethernet-controller.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ethernet Controller Generic Binding
+title: Ethernet Controller Common Properties
 
 maintainers:
   - David S. Miller <davem@davemloft.net>
@@ -13,13 +13,16 @@ properties:
   $nodename:
     pattern: "^ethernet(@.*)?$"
 
+  label:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Human readable label on a port of a box.
+
   local-mac-address:
     description:
       Specifies the MAC address that was assigned to the network device.
     $ref: /schemas/types.yaml#/definitions/uint8-array
-    items:
-      - minItems: 6
-        maxItems: 6
+    minItems: 6
+    maxItems: 6
 
   mac-address:
     description:
@@ -28,9 +31,8 @@ properties:
       to the device by the boot program is different from the
       local-mac-address property.
     $ref: /schemas/types.yaml#/definitions/uint8-array
-    items:
-      - minItems: 6
-        maxItems: 6
+    minItems: 6
+    maxItems: 6
 
   max-frame-size:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -65,10 +67,12 @@ properties:
       - gmii
       - sgmii
       - qsgmii
+      - qusgmii
       - tbi
       - rev-mii
       - rmii
       - rev-rmii
+      - moca
 
       # RX and TX delays are added by the MAC when required
       - rgmii
@@ -103,6 +107,18 @@ properties:
   phy-mode:
     $ref: "#/properties/phy-connection-type"
 
+  pcs-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      Specifies a reference to a node representing a PCS PHY device on a MDIO
+      bus to link with an external PHY (phy-handle) if exists.
+
+  pcs-handle-names:
+    description:
+      The name of each PCS in pcs-handle.
+
   phy-handle:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -124,12 +140,6 @@ properties:
       and is useful for determining certain configuration settings
       such as flow control thresholds.
 
-  rx-internal-delay-ps:
-    description: |
-      RGMII Receive Clock Delay defined in pico seconds.
-      This is used for controllers that have configurable RX internal delays.
-      If this property is present then the MAC applies the RX delay.
-
   sfp:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -141,12 +151,6 @@ properties:
       The size of the controller\'s transmit fifo in bytes. This
       is used for components that can have configurable fifo sizes.
 
-  tx-internal-delay-ps:
-    description: |
-      RGMII Transmit Clock Delay defined in pico seconds.
-      This is used for controllers that have configurable TX internal delays.
-      If this property is present then the MAC applies the TX delay.
-
   managed:
     description:
       Specifies the PHY management type. If auto is set and fixed-link
@@ -158,73 +162,126 @@ properties:
       - in-band-status
 
   fixed-link:
-    allOf:
-      - if:
-          type: array
-        then:
-          deprecated: true
-          minItems: 1
-          maxItems: 1
-          items:
-            items:
-              - minimum: 0
-                maximum: 31
-                description:
-                  Emulated PHY ID, choose any but unique to the all
-                  specified fixed-links
-
-              - enum: [0, 1]
-                description:
-                  Duplex configuration. 0 for half duplex or 1 for
-                  full duplex
-
-              - enum: [10, 100, 1000]
-                description:
-                  Link speed in Mbits/sec.
-
-              - enum: [0, 1]
-                description:
-                  Pause configuration. 0 for no pause, 1 for pause
-
-              - enum: [0, 1]
-                description:
-                  Asymmetric pause configuration. 0 for no asymmetric
-                  pause, 1 for asymmetric pause
-
-
-      - if:
-          type: object
-        then:
-          properties:
-            speed:
-              description:
-                Link speed.
-              $ref: /schemas/types.yaml#/definitions/uint32
-              enum: [10, 100, 1000]
-
-            full-duplex:
-              $ref: /schemas/types.yaml#/definitions/flag
-              description:
-                Indicates that full-duplex is used. When absent, half
-                duplex is assumed.
-
-            pause:
-              $ref: /schemas/types.yaml#definitions/flag
-              description:
-                Indicates that pause should be enabled.
-
-            asym-pause:
-              $ref: /schemas/types.yaml#/definitions/flag
-              description:
-                Indicates that asym_pause should be enabled.
-
-            link-gpios:
-              maxItems: 1
-              description:
-                GPIO to determine if the link is up
-
-          required:
-            - speed
+    oneOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+        deprecated: true
+        items:
+          - minimum: 0
+            maximum: 31
+            description:
+              Emulated PHY ID, choose any but unique to the all
+              specified fixed-links
+
+          - enum: [0, 1]
+            description:
+              Duplex configuration. 0 for half duplex or 1 for
+              full duplex
+
+          - enum: [10, 100, 1000, 2500, 10000]
+            description:
+              Link speed in Mbits/sec.
+
+          - enum: [0, 1]
+            description:
+              Pause configuration. 0 for no pause, 1 for pause
+
+          - enum: [0, 1]
+            description:
+              Asymmetric pause configuration. 0 for no asymmetric
+              pause, 1 for asymmetric pause
+      - type: object
+        additionalProperties: false
+        properties:
+          speed:
+            description:
+              Link speed.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [10, 100, 1000, 2500, 10000]
+
+          full-duplex:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Indicates that full-duplex is used. When absent, half
+              duplex is assumed.
+
+          pause:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Indicates that pause should be enabled.
+
+          asym-pause:
+            $ref: /schemas/types.yaml#/definitions/flag
+            description:
+              Indicates that asym_pause should be enabled.
+
+          link-gpios:
+            maxItems: 1
+            description:
+              GPIO to determine if the link is up
+
+        required:
+          - speed
+
+  leds:
+    description:
+      Describes the LEDs associated by Ethernet Controller.
+      These LEDs are not integrated in the PHY and PHY doesn't have any
+      control on them. Ethernet Controller regs are used to control
+      these defined LEDs.
+
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      '^led@[a-f0-9]+$':
+        $ref: /schemas/leds/common.yaml#
+
+        properties:
+          reg:
+            maxItems: 1
+            description:
+              This define the LED index in the PHY or the MAC. It's really
+              driver dependent and required for ports that define multiple
+              LED for the same port.
+
+        required:
+          - reg
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+dependencies:
+  pcs-handle-names: [pcs-handle]
+
+allOf:
+  - if:
+      properties:
+        phy-mode:
+          contains:
+            enum:
+              - rgmii
+              - rgmii-rxid
+              - rgmii-txid
+              - rgmii-id
+    then:
+      properties:
+        rx-internal-delay-ps:
+          description:
+            RGMII Receive Clock Delay defined in pico seconds.This is used for
+            controllers that have configurable RX internal delays. If this
+            property is present then the MAC applies the RX delay.
+        tx-internal-delay-ps:
+          description:
+            RGMII Transmit Clock Delay defined in pico seconds.This is used for
+            controllers that have configurable TX internal delays. If this
+            property is present then the MAC applies the TX delay.
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 2766fe45bb98..4f574532ee13 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ethernet PHY Generic Binding
+title: Ethernet PHY Common Properties
 
 maintainers:
   - Andrew Lunn <andrew@lunn.ch>
@@ -77,6 +77,15 @@ properties:
     description:
       Maximum PHY supported speed in Mbits / seconds.
 
+  phy-10base-t1l-2.4vpp:
+    description: |
+      tristate, request/disable 2.4 Vpp operating mode. The values are:
+      0: Disable 2.4 Vpp operating mode.
+      1: Request 2.4 Vpp operating mode from link partner.
+      Absence of this property will leave configuration to default values.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
   broken-turn-around:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
@@ -91,6 +100,14 @@ properties:
       compensate for the board being designed with the lanes
       swapped.
 
+  enet-phy-lane-no-swap:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      If set, indicates that PHY will disable swap of the
+      TX/RX lanes. This property allows the PHY to work correcly after
+      e.g. wrong bootstrap configuration caused by issues in PCB
+      layout design.
+
   eee-broken-100tx:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
@@ -127,6 +144,12 @@ properties:
       Mark the corresponding energy efficient ethernet mode as
       broken and request the ethernet to stop advertising it.
 
+  pses:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description:
+      Specifies a reference to a node representing a Power Sourcing Equipment.
+
   phy-is-integrated:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
@@ -174,6 +197,35 @@ properties:
       PHY's that have configurable TX internal delays. If this property is
       present then the PHY applies the TX delay.
 
+  leds:
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      '^led@[a-f0-9]+$':
+        $ref: /schemas/leds/common.yaml#
+
+        properties:
+          reg:
+            maxItems: 1
+            description:
+              This define the LED index in the PHY or the MAC. It's really
+              driver dependent and required for ports that define multiple
+              LED for the same port.
+
+        required:
+          - reg
+
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
 required:
   - reg
 
@@ -181,6 +233,8 @@ additionalProperties: true
 
 examples:
   - |
+    #include <dt-bindings/leds/common.h>
+
     ethernet {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -196,5 +250,17 @@ examples:
             reset-gpios = <&gpio1 4 1>;
             reset-assert-us = <1000>;
             reset-deassert-us = <2000>;
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_WHITE>;
+                    function = LED_FUNCTION_LAN;
+                    default-state = "keep";
+                };
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
new file mode 100644
index 000000000000..d5cf7e40e3c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-switch-port.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-switch-port.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Ethernet Switch Port
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vladimir Oltean <olteanv@gmail.com>
+
+description:
+  An Ethernet switch port is a component of a switch that manages one MAC, and
+  can pass Ethernet frames.
+
+$ref: ethernet-controller.yaml#
+
+properties:
+  reg:
+    description: Port number
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
new file mode 100644
index 000000000000..f1b9075dc7fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Ethernet Switch
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Vladimir Oltean <olteanv@gmail.com>
+
+description:
+  Ethernet switches are multi-port Ethernet controllers. Each port has
+  its own number and is represented as its own Ethernet controller.
+  The minimum required functionality is to pass packets to software.
+  They may or may not be able to forward packets automonously between
+  ports.
+
+select: false
+
+properties:
+  $nodename:
+    pattern: "^(ethernet-)?switch(@.*)?$"
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    type: object
+    unevaluatedProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        type: object
+        description: Ethernet switch ports
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+oneOf:
+  - required:
+      - ports
+  - required:
+      - ethernet-ports
+
+additionalProperties: true
+
+$defs:
+  base:
+    description: An ethernet switch without any extra port properties
+    $ref: '#'
+
+    patternProperties:
+      "^(ethernet-)?port@[0-9]+$":
+        description: Ethernet switch ports
+        $ref: ethernet-switch-port.yaml#
+        unevaluatedProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml
index eca41443fcce..b494e009326e 100644
--- a/Documentation/devicetree/bindings/net/fsl,fec.yaml
+++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml
@@ -7,7 +7,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Freescale Fast Ethernet Controller (FEC)
 
 maintainers:
-  - Joakim Zhang <qiangqing.zhang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - Wei Fang <wei.fang@nxp.com>
+  - NXP Linux Team <linux-imx@nxp.com>
 
 allOf:
   - $ref: ethernet-controller.yaml#
@@ -21,6 +23,7 @@ properties:
           - fsl,imx28-fec
           - fsl,imx6q-fec
           - fsl,mvf600-fec
+          - fsl,s32v234-fec
       - items:
           - enum:
               - fsl,imx53-fec
@@ -48,6 +51,7 @@ properties:
               - fsl,imx8mm-fec
               - fsl,imx8mn-fec
               - fsl,imx8mp-fec
+              - fsl,imx93-fec
           - const: fsl,imx8mq-fec
           - const: fsl,imx6sx-fec
       - items:
@@ -58,6 +62,11 @@ properties:
               - fsl,imx8qxp-fec
           - const: fsl,imx8qm-fec
           - const: fsl,imx6sx-fec
+      - items:
+          - enum:
+              - fsl,imx8ulp-fec
+          - const: fsl,imx6ul-fec
+          - const: fsl,imx6q-fec
 
   reg:
     maxItems: 1
@@ -121,6 +130,10 @@ properties:
 
   mac-address: true
 
+  nvmem-cells: true
+
+  nvmem-cell-names: true
+
   tx-internal-delay-ps:
     enum: [0, 2000]
 
@@ -131,6 +144,9 @@ properties:
     description:
       Regulator that powers the Ethernet PHY.
 
+  power-domains:
+    maxItems: 1
+
   fsl,num-tx-queues:
     $ref: /schemas/types.yaml#/definitions/uint32
     description:
@@ -158,14 +174,17 @@ properties:
 
   fsl,stop-mode:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to general purpose register node
+          - description: the gpr register offset for ENET stop request
+          - description: the gpr bit offset for ENET stop request
     description:
       Register bits of stop mode control, the format is <&gpr req_gpr req_bit>.
-      gpr is the phandle to general purpose register node.
-      req_gpr is the gpr register offset for ENET stop request.
-      req_bit is the gpr bit offset for ENET stop request.
 
   mdio:
-    type: object
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
     description:
       Specifies the mdio bus in the FEC, used as a container for phy nodes.
 
@@ -180,6 +199,7 @@ properties:
       Should specify the gpio for phy reset.
 
   phy-reset-duration:
+    $ref: /schemas/types.yaml#/definitions/uint32
     deprecated: true
     description:
       Reset duration in milliseconds.  Should present only if property
@@ -188,12 +208,14 @@ properties:
       and 1 millisecond will be used instead.
 
   phy-reset-active-high:
+    type: boolean
     deprecated: true
     description:
       If present then the reset sequence using the GPIO specified in the
       "phy-reset-gpios" property is reversed (H=reset state, L=operation state).
 
   phy-reset-post-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
     deprecated: true
     description:
       Post reset delay in milliseconds. If present then a delay of phy-reset-post-delay
@@ -210,7 +232,7 @@ required:
 # least undocumented properties. However, PHY may have a deprecated option to
 # place PHY OF properties in the MAC node, such as Micrel PHY, and we can find
 # these boards which is based on i.MX6QDL.
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
new file mode 100644
index 000000000000..c80c880a9dab
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/fsl,fman-dtsec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP FMan MAC
+
+maintainers:
+  - Madalin Bucur <madalin.bucur@nxp.com>
+
+description: |
+  Each FMan has several MACs, each implementing an Ethernet interface. Earlier
+  versions of FMan used the Datapath Three Speed Ethernet Controller (dTSEC) for
+  10/100/1000 MBit/s speeds, and the 10-Gigabit Ethernet Media Access Controller
+  (10GEC) for 10 Gbit/s speeds. Later versions of FMan use the Multirate
+  Ethernet Media Access Controller (mEMAC) to handle all speeds.
+
+properties:
+  compatible:
+    enum:
+      - fsl,fman-dtsec
+      - fsl,fman-xgec
+      - fsl,fman-memac
+
+  cell-index:
+    maximum: 64
+    description: |
+      FManV2:
+      register[bit]           MAC             cell-index
+      ============================================================
+      FM_EPI[16]              XGEC            8
+      FM_EPI[16+n]            dTSECn          n-1
+      FM_NPI[11+n]            dTSECn          n-1
+              n = 1,..,5
+
+      FManV3:
+      register[bit]           MAC             cell-index
+      ============================================================
+      FM_EPI[16+n]            mEMACn          n-1
+      FM_EPI[25]              mEMAC10         9
+
+      FM_NPI[11+n]            mEMACn          n-1
+      FM_NPI[10]              mEMAC10         9
+      FM_NPI[11]              mEMAC9          8
+              n = 1,..8
+
+      FM_EPI and FM_NPI are located in the FMan memory map.
+
+      2. SoC registers:
+
+      - P2041, P3041, P4080 P5020, P5040:
+      register[bit]           FMan            MAC             cell
+                              Unit                            index
+      ============================================================
+      DCFG_DEVDISR2[7]        1               XGEC            8
+      DCFG_DEVDISR2[7+n]      1               dTSECn          n-1
+      DCFG_DEVDISR2[15]       2               XGEC            8
+      DCFG_DEVDISR2[15+n]     2               dTSECn          n-1
+              n = 1,..5
+
+      - T1040, T2080, T4240, B4860:
+      register[bit]                   FMan    MAC             cell
+                                      Unit                    index
+      ============================================================
+      DCFG_CCSR_DEVDISR2[n-1]         1       mEMACn          n-1
+      DCFG_CCSR_DEVDISR2[11+n]        2       mEMACn          n-1
+              n = 1,..6,9,10
+
+      EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
+      the specific SoC "Device Configuration/Pin Control" Memory
+      Map.
+
+  reg:
+    maxItems: 1
+
+  fsl,fman-ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 2
+    description: |
+      An array of two references: the first is the FMan RX port and the second
+      is the TX port used by this MAC.
+
+  ptp-timer:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A reference to the IEEE1588 timer
+
+  phys:
+    description: A reference to the SerDes lane(s)
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: serdes
+
+  pcsphy-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 3
+    deprecated: true
+    description: See pcs-handle.
+
+  pcs-handle:
+    minItems: 1
+    maxItems: 3
+    description: |
+      A reference to the various PCSs (typically found on the SerDes). If
+      pcs-handle-names is absent, and phy-connection-type is "xgmii", then the first
+      reference will be assumed to be for "xfi". Otherwise, if pcs-handle-names is
+      absent, then the first reference will be assumed to be for "sgmii".
+
+  pcs-handle-names:
+    minItems: 1
+    maxItems: 3
+    items:
+      enum:
+        - sgmii
+        - qsgmii
+        - xfi
+    description: The type of each PCS in pcsphy-handle.
+
+  tbi-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A reference to the (TBI-based) PCS
+
+required:
+  - compatible
+  - cell-index
+  - reg
+  - fsl,fman-ports
+  - ptp-timer
+
+dependencies:
+  pcs-handle-names:
+    - pcs-handle
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: fsl,fman-dtsec
+    then:
+      required:
+        - tbi-handle
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@e0000 {
+            compatible = "fsl,fman-dtsec";
+            cell-index = <0>;
+            reg = <0xe0000 0x1000>;
+            fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
+            ptp-timer = <&ptp_timer>;
+            tbi-handle = <&tbi0>;
+    };
+  - |
+    ethernet@e8000 {
+            cell-index = <4>;
+            compatible = "fsl,fman-memac";
+            reg = <0xe8000 0x1000>;
+            fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>;
+            ptp-timer = <&ptp_timer0>;
+            pcs-handle = <&pcsphy4>, <&qsgmiib_pcs1>;
+            pcs-handle-names = "sgmii", "qsgmii";
+            phys = <&serdes1 1>;
+            phy-names = "serdes";
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
index 7f620a71a972..a1b71b35319e 100644
--- a/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
+++ b/Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/fsl,qoriq-mc-dpmac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: DPAA2 MAC bindings
+title: DPAA2 MAC
 
 maintainers:
   - Ioana Ciornei <ioana.ciornei@nxp.com>
@@ -14,7 +14,7 @@ description:
   located under the 'dpmacs' node for the fsl-mc bus DTS node.
 
 allOf:
-  - $ref: "ethernet-controller.yaml#"
+  - $ref: ethernet-controller.yaml#
 
 properties:
   compatible:
@@ -31,7 +31,7 @@ properties:
   phy-mode: true
 
   pcs-handle:
-    $ref: /schemas/types.yaml#/definitions/phandle
+    maxItems: 1
     description:
       A reference to a node representing a PCS PHY device found on
       the internal MDIO bus.
diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt
index c00fb0d22c7b..bda4b41af074 100644
--- a/Documentation/devicetree/bindings/net/fsl-fman.txt
+++ b/Documentation/devicetree/bindings/net/fsl-fman.txt
@@ -232,133 +232,7 @@ port@81000 {
 =============================================================================
 FMan dTSEC/XGEC/mEMAC Node
 
-DESCRIPTION
-
-mEMAC/dTSEC/XGEC are the Ethernet network interfaces
-
-PROPERTIES
-
-- compatible
-		Usage: required
-		Value type: <stringlist>
-		Definition: A standard property.
-		Must include one of the following:
-		- "fsl,fman-dtsec" for dTSEC MAC
-		- "fsl,fman-xgec" for XGEC MAC
-		- "fsl,fman-memac" for mEMAC MAC
-
-- cell-index
-		Usage: required
-		Value type: <u32>
-		Definition: Specifies the MAC id.
-
-		The cell-index value may be used by the FMan or the SoC, to
-		identify the MAC unit in the FMan (or SoC) memory map.
-		In the tables below there's a description of the cell-index
-		use, there are two tables, one describes the use of cell-index
-		by the FMan, the second describes the use by the SoC:
-
-		1. FMan Registers
-
-		FManV2:
-		register[bit]		MAC		cell-index
-		============================================================
-		FM_EPI[16]		XGEC		8
-		FM_EPI[16+n]		dTSECn		n-1
-		FM_NPI[11+n]		dTSECn		n-1
-			n = 1,..,5
-
-		FManV3:
-		register[bit]		MAC		cell-index
-		============================================================
-		FM_EPI[16+n]		mEMACn		n-1
-		FM_EPI[25]		mEMAC10		9
-
-		FM_NPI[11+n]		mEMACn		n-1
-		FM_NPI[10]		mEMAC10		9
-		FM_NPI[11]		mEMAC9		8
-			n = 1,..8
-
-		FM_EPI and FM_NPI are located in the FMan memory map.
-
-		2. SoC registers:
-
-		- P2041, P3041, P4080 P5020, P5040:
-		register[bit]		FMan		MAC		cell
-					Unit				index
-		============================================================
-		DCFG_DEVDISR2[7]	1		XGEC		8
-		DCFG_DEVDISR2[7+n]	1		dTSECn		n-1
-		DCFG_DEVDISR2[15]	2		XGEC		8
-		DCFG_DEVDISR2[15+n]	2		dTSECn		n-1
-			n = 1,..5
-
-		- T1040, T2080, T4240, B4860:
-		register[bit]			FMan	MAC		cell
-						Unit			index
-		============================================================
-		DCFG_CCSR_DEVDISR2[n-1]		1	mEMACn		n-1
-		DCFG_CCSR_DEVDISR2[11+n]	2	mEMACn		n-1
-			n = 1,..6,9,10
-
-		EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
-		the specific SoC "Device Configuration/Pin Control" Memory
-		Map.
-
-- reg
-		Usage: required
-		Value type: <prop-encoded-array>
-		Definition: A standard property.
-
-- fsl,fman-ports
-		Usage: required
-		Value type: <prop-encoded-array>
-		Definition: An array of two phandles - the first references is
-		the FMan RX port and the second is the TX port used by this
-		MAC.
-
-- ptp-timer
-		Usage required
-		Value type: <phandle>
-		Definition: A phandle for 1EEE1588 timer.
-
-- pcsphy-handle
-		Usage required for "fsl,fman-memac" MACs
-		Value type: <phandle>
-		Definition: A phandle for pcsphy.
-
-- tbi-handle
-		Usage required for "fsl,fman-dtsec" MACs
-		Value type: <phandle>
-		Definition: A phandle for tbiphy.
-
-EXAMPLE
-
-fman1_tx28: port@a8000 {
-	cell-index = <0x28>;
-	compatible = "fsl,fman-v2-port-tx";
-	reg = <0xa8000 0x1000>;
-};
-
-fman1_rx8: port@88000 {
-	cell-index = <0x8>;
-	compatible = "fsl,fman-v2-port-rx";
-	reg = <0x88000 0x1000>;
-};
-
-ptp-timer: ptp_timer@fe000 {
-	compatible = "fsl,fman-ptp-timer";
-	reg = <0xfe000 0x1000>;
-};
-
-ethernet@e0000 {
-	compatible = "fsl,fman-dtsec";
-	cell-index = <0>;
-	reg = <0xe0000 0x1000>;
-	fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
-	ptp-timer = <&ptp-timer>;
-	tbi-handle = <&tbi0>;
-};
+Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml
 
 ============================================================================
 FMan IEEE 1588 Node
@@ -388,14 +262,24 @@ PROPERTIES
 		Value type: <prop-encoded-array>
 		Definition: A standard property.
 
-- bus-frequency
+- clocks
+		Usage: optional
+		Value type: <phandle>
+		Definition: A reference to the input clock of the controller
+		from which the MDC frequency is derived.
+
+- clock-frequency
 		Usage: optional
 		Value type: <u32>
-		Definition: Specifies the external MDIO bus clock speed to
-		be used, if different from the standard 2.5 MHz.
-		This may be due to the standard speed being unsupported (e.g.
-		due to a hardware problem), or to advertise that all relevant
-		components in the system support a faster speed.
+		Definition: Specifies the external MDC frequency, in Hertz, to
+		be used. Requires that the input clock is specified in the
+		"clocks" property. See also: mdio.yaml.
+
+- suppress-preamble
+		Usage: optional
+		Value type: <boolean>
+		Definition: Disable generation of preamble bits. See also:
+		mdio.yaml.
 
 - interrupts
 		Usage: required for external MDIO
@@ -410,6 +294,15 @@ PROPERTIES
 		The settings and programming routines for internal/external
 		MDIO are different. Must be included for internal MDIO.
 
+- fsl,erratum-a009885
+		Usage: optional
+		Value type: <boolean>
+		Definition: Indicates the presence of the A009885
+		erratum describing that the contents of MDIO_DATA may
+		become corrupt unless it is read within 16 MDC cycles
+		of MDIO_CFG[BSY] being cleared, when performing an
+		MDIO read operation.
+
 - fsl,erratum-a011043
 		Usage: optional
 		Value type: <boolean>
@@ -427,8 +320,9 @@ For internal PHY device on internal mdio bus, a PHY node should be created.
 See the definition of the PHY node in booting-without-of.txt for an
 example of how to define a PHY (Internal PHY has no interrupt line).
 - For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY.
-- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY,
-  PCS PHY addr must be '0'.
+- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY.
+  The PCS PHY address should correspond to the value of the appropriate
+  MDEV_PORT.
 
 EXAMPLE
 
diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt
deleted file mode 100644
index 32821066a85b..000000000000
--- a/Documentation/devicetree/bindings/net/gpmc-eth.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-Device tree bindings for Ethernet chip connected to TI GPMC
-
-Besides being used to interface with external memory devices, the
-General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices
-such as ethernet controllers to processors using the TI GPMC as a data bus.
-
-Ethernet controllers connected to TI GPMC are represented as child nodes of
-the GPMC controller with an "ethernet" name.
-
-All timing relevant properties as well as generic GPMC child properties are
-explained in a separate documents. Please refer to
-Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
-
-For the properties relevant to the ethernet controller connected to the GPMC
-refer to the binding documentation of the device. For example, the documentation
-for the SMSC 911x is Documentation/devicetree/bindings/net/smsc,lan9115.yaml
-
-Child nodes need to specify the GPMC bus address width using the "bank-width"
-property but is possible that an ethernet controller also has a property to
-specify the I/O registers address width. Even when the GPMC has a maximum 16-bit
-address width, it supports devices with 32-bit word registers.
-For example with an SMSC LAN911x/912x controller connected to the TI GPMC on an
-OMAP2+ board, "bank-width = <2>;" and "reg-io-width = <4>;".
-
-Required properties:
-- bank-width: 		Address width of the device in bytes. GPMC supports 8-bit
-			and 16-bit devices and so must be either 1 or 2 bytes.
-- compatible:		Compatible string property for the ethernet child device.
-- gpmc,cs-on-ns:	Chip-select assertion time
-- gpmc,cs-rd-off-ns:	Chip-select de-assertion time for reads
-- gpmc,cs-wr-off-ns:	Chip-select de-assertion time for writes
-- gpmc,oe-on-ns:	Output-enable assertion time
-- gpmc,oe-off-ns:	Output-enable de-assertion time
-- gpmc,we-on-ns:	Write-enable assertion time
-- gpmc,we-off-ns:	Write-enable de-assertion time
-- gpmc,access-ns:	Start cycle to first data capture (read access)
-- gpmc,rd-cycle-ns:	Total read cycle time
-- gpmc,wr-cycle-ns:	Total write cycle time
-- reg:			Chip-select, base address (relative to chip-select)
-			and size of the memory mapped for the device.
-			Note that base address will be typically 0 as this
-			is the start of the chip-select.
-
-Optional properties:
-- gpmc,XXX		Additional GPMC timings and settings parameters. See
-			Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
-
-Example:
-
-gpmc: gpmc@6e000000 {
-	compatible = "ti,omap3430-gpmc";
-	ti,hwmods = "gpmc";
-	reg = <0x6e000000 0x1000>;
-	interrupts = <20>;
-	gpmc,num-cs = <8>;
-	gpmc,num-waitpins = <4>;
-	#address-cells = <2>;
-	#size-cells = <1>;
-
-	ranges = <5 0 0x2c000000 0x1000000>;
-
-	ethernet@5,0 {
-		compatible = "smsc,lan9221", "smsc,lan9115";
-		reg = <5 0 0xff>;
-		bank-width = <2>;
-
-		gpmc,mux-add-data;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <186>;
-		gpmc,cs-wr-off-ns = <186>;
-		gpmc,adv-on-ns = <12>;
-		gpmc,adv-rd-off-ns = <48>;
-		gpmc,adv-wr-off-ns = <48>;
-		gpmc,oe-on-ns = <54>;
-		gpmc,oe-off-ns = <168>;
-		gpmc,we-on-ns = <54>;
-		gpmc,we-off-ns = <168>;
-		gpmc,rd-cycle-ns = <186>;
-		gpmc,wr-cycle-ns = <186>;
-		gpmc,access-ns = <114>;
-		gpmc,page-burst-access-ns = <6>;
-		gpmc,bus-turnaround-ns = <12>;
-		gpmc,cycle2cycle-delay-ns = <18>;
-		gpmc,wr-data-mux-bus-ns = <90>;
-		gpmc,wr-access-ns = <186>;
-		gpmc,cycle2cycle-samecsen;
-		gpmc,cycle2cycle-diffcsen;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <16>;
-		vmmc-supply = <&vddvario>;
-		vmmc_aux-supply = <&vdd33a>;
-		reg-io-width = <4>;
-
-		smsc,save-mac-address;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/ingenic,mac.yaml b/Documentation/devicetree/bindings/net/ingenic,mac.yaml
index d08a88125a5c..bdea101c2f75 100644
--- a/Documentation/devicetree/bindings/net/ingenic,mac.yaml
+++ b/Documentation/devicetree/bindings/net/ingenic,mac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/ingenic,mac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Bindings for MAC in Ingenic SoCs
+title: MAC in Ingenic SoCs
 
 maintainers:
   - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
@@ -37,6 +37,7 @@ properties:
     const: stmmaceth
 
   mode-reg:
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: An extra syscon register that control ethernet interface and timing delay
 
   rx-clk-delay-ps:
@@ -58,7 +59,7 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/x1000-cgu.h>
+    #include <dt-bindings/clock/ingenic,x1000-cgu.h>
 
     mac: ethernet@134b0000 {
         compatible = "ingenic,x1000-mac";
diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
index 08a3f1f6aea2..d23fa3771210 100644
--- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/intel,dwmac-plat.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Intel DWMAC glue layer Device Tree Bindings
+title: Intel DWMAC glue layer
 
 maintainers:
   - Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
@@ -117,7 +117,7 @@ examples:
         snps,mtl-tx-config = <&mtl_tx_setup>;
         snps,tso;
 
-        mdio0 {
+        mdio {
             #address-cells = <1>;
             #size-cells = <0>;
             compatible = "snps,dwmac-mdio";
diff --git a/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml b/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml
index 8b9b3f915d92..f92730b1d2fa 100644
--- a/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml
+++ b/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml
@@ -2,8 +2,8 @@
 # Copyright 2018 Linaro Ltd.
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/net/intel,ixp46x-ptp-timer.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/intel,ixp46x-ptp-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Intel IXP46x PTP Timer (TSYNC)
 
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
index 378ed2d3b003..4fdc5328826c 100644
--- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
@@ -2,13 +2,13 @@
 # Copyright 2018 Linaro Ltd.
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Intel IXP4xx ethernet
 
 allOf:
-  - $ref: "ethernet-controller.yaml#"
+  - $ref: ethernet-controller.yaml#
 
 maintainers:
   - Linus Walleij <linus.walleij@linaro.org>
@@ -28,13 +28,19 @@ properties:
     description: Ethernet MMIO address range
 
   queue-rx:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the RX queue node
+          - description: RX queue instance to use
     description: phandle to the RX queue on the NPE
 
   queue-txready:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the TX READY queue node
+          - description: TX READY queue instance to use
     description: phandle to the TX READY queue on the NPE
 
   phy-mode: true
@@ -42,14 +48,17 @@ properties:
   phy-handle: true
 
   intel,npe-handle:
-    $ref: '/schemas/types.yaml#/definitions/phandle-array'
-    maxItems: 1
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the NPE this ethernet instance is using
+          - description: the NPE instance to use
     description: phandle to the NPE this ethernet instance is using
       and the instance to use in the second cell
 
   mdio:
-    type: object
-    $ref: "mdio.yaml#"
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
     description: optional node for embedded MDIO controller
 
 required:
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml
new file mode 100644
index 000000000000..7a405e9b37b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2021 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/intel,ixp4xx-hss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx V.35 WAN High Speed Serial Link (HSS)
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Intel IXP4xx HSS makes use of the IXP4xx NPE (Network
+  Processing Engine) and the IXP4xx Queue Manager to process
+  V.35 Wideband Modem (WAN) links.
+
+properties:
+  compatible:
+    const: intel,ixp4xx-hss
+
+  reg:
+    maxItems: 1
+    description: The HSS instance
+
+  intel,npe-handle:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: phandle to the NPE this HSS instance is using
+        - description: the NPE instance number
+    description: phandle to the NPE this HSS instance is using
+      and the instance to use in the second cell
+
+  intel,queue-chl-rxtrig:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the RX trigger queue on the NPE
+          - description: the queue instance number
+    description: phandle to the RX trigger queue on the NPE
+
+  intel,queue-chl-txready:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the TX ready queue on the NPE
+          - description: the queue instance number
+    description: phandle to the TX ready queue on the NPE
+
+  intel,queue-pkt-rx:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the RX queue on the NPE
+          - description: the queue instance number
+    description: phandle to the packet RX queue on the NPE
+
+  intel,queue-pkt-tx:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 4
+    items:
+      items:
+        - description: phandle to the TX queue on the NPE
+        - description: the queue instance number
+    description: phandle to the packet TX0, TX1, TX2 and TX3 queues on the NPE
+
+  intel,queue-pkt-rxfree:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 4
+    items:
+      items:
+        - description: phandle to the RXFREE queue on the NPE
+        - description: the queue instance number
+    description: phandle to the packet RXFREE0, RXFREE1, RXFREE2 and
+      RXFREE3 queues on the NPE
+
+  intel,queue-pkt-txdone:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the TXDONE queue on the NPE
+          - description: the queue instance number
+    description: phandle to the packet TXDONE queue on the NPE
+
+  cts-gpios:
+    maxItems: 1
+    description: Clear To Send (CTS) GPIO line
+
+  rts-gpios:
+    maxItems: 1
+    description: Ready To Send (RTS) GPIO line
+
+  dcd-gpios:
+    maxItems: 1
+    description: Data Carrier Detect (DCD) GPIO line
+
+  dtr-gpios:
+    maxItems: 1
+    description: Data Terminal Ready (DTR) GPIO line
+
+  clk-internal-gpios:
+    maxItems: 1
+    description: Clock internal GPIO line, driving this high will make the HSS
+      use internal clocking as opposed to external clocking
+
+required:
+  - compatible
+  - reg
+  - intel,npe-handle
+  - intel,queue-chl-rxtrig
+  - intel,queue-chl-txready
+  - intel,queue-pkt-rx
+  - intel,queue-pkt-tx
+  - intel,queue-pkt-rxfree
+  - intel,queue-pkt-txdone
+  - cts-gpios
+  - rts-gpios
+  - dcd-gpios
+  - dtr-gpios
+  - clk-internal-gpios
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml
new file mode 100644
index 000000000000..3ce9f9a16baf
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/lantiq,etop-xway.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq Xway ETOP Ethernet driver
+
+maintainers:
+  - John Crispin <john@phrozen.org>
+
+properties:
+  $nodename:
+    pattern: "^ethernet@[0-9a-f]+$"
+
+  compatible:
+    const: lantiq,etop-xway
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: TX interrupt
+      - description: RX interrupt
+
+  interrupt-names:
+    items:
+      - const: tx
+      - const: rx
+
+  lantiq,tx-burst-length:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      TX programmable burst length.
+    enum: [2, 4, 8]
+
+  lantiq,rx-burst-length:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RX programmable burst length.
+    enum: [2, 4, 8]
+
+  phy-mode: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - lantiq,tx-burst-length
+  - lantiq,rx-burst-length
+  - phy-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    ethernet@e180000 {
+        compatible = "lantiq,etop-xway";
+        reg = <0xe180000 0x40000>;
+        interrupt-parent = <&icu0>;
+        interrupts = <73>, <78>;
+        interrupt-names = "tx", "rx";
+        lantiq,tx-burst-length = <8>;
+        lantiq,rx-burst-length = <8>;
+        phy-mode = "rmii";
+    };
diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
deleted file mode 100644
index 5ff5e68bbbb6..000000000000
--- a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-Lantiq xRX200 GSWIP PMAC Ethernet driver
-==================================
-
-Required properties:
-
-- compatible	: "lantiq,xrx200-net" for the PMAC of the embedded
-		: GSWIP in the xXR200
-- reg		: memory range of the PMAC core inside of the GSWIP core
-- interrupts	: TX and RX DMA interrupts. Use interrupt-names "tx" for
-		: the TX interrupt and "rx" for the RX interrupt.
-
-Example:
-
-ethernet@e10b308 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "lantiq,xrx200-net";
-	reg = <0xe10b308 0xcf8>;
-	interrupts = <73>, <72>;
-	interrupt-names = "tx", "rx";
-};
diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml
new file mode 100644
index 000000000000..5bc1a21ca579
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/lantiq,xrx200-net.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Lantiq xRX200 GSWIP PMAC Ethernet driver
+
+maintainers:
+  - Hauke Mehrtens <hauke@hauke-m.de>
+
+properties:
+  $nodename:
+    pattern: "^ethernet@[0-9a-f]+$"
+
+  compatible:
+    const: lantiq,xrx200-net
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: TX interrupt
+      - description: RX interrupt
+
+  interrupt-names:
+    items:
+      - const: tx
+      - const: rx
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    ethernet@e10b308 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "lantiq,xrx200-net";
+        reg = <0xe10b308 0xcf8>;
+        interrupt-parent = <&icu0>;
+        interrupts = <73>, <72>;
+        interrupt-names = "tx", "rx";
+    };
diff --git a/Documentation/devicetree/bindings/net/litex,liteeth.yaml b/Documentation/devicetree/bindings/net/litex,liteeth.yaml
index 76c164a8199a..ebf4e360f8dd 100644
--- a/Documentation/devicetree/bindings/net/litex,liteeth.yaml
+++ b/Documentation/devicetree/bindings/net/litex,liteeth.yaml
@@ -62,6 +62,7 @@ properties:
 
   mdio:
     $ref: mdio.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
deleted file mode 100644
index af9df2f01a1c..000000000000
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Cadence MACB/GEM Ethernet controller
-
-Required properties:
-- compatible: Should be "cdns,[<chip>-]{macb|gem}"
-  Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
-  Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs.
-  Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC.
-  Use "cdns,np4-macb" for NP4 SoC devices.
-  Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
-  Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs.
-  Use "atmel,sama5d29-gem" for GEM XL IP (10/100) available on Atmel sama5d29 SoCs.
-  Use "atmel,sama5d3-macb" for the 10/100Mbit IP available on Atmel sama5d3 SoCs.
-  Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
-  Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs.
-  Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
-  Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC.
-  Use "sifive,fu540-c000-gem" for SiFive FU540-C000 SoC.
-  Use "microchip,sama7g5-emac" for Microchip SAMA7G5 ethernet interface.
-  Use "microchip,sama7g5-gem" for Microchip SAMA7G5 gigabit ethernet interface.
-  Or the generic form: "cdns,emac".
-- reg: Address and length of the register set for the device
-	For "sifive,fu540-c000-gem", second range is required to specify the
-	address and length of the registers for GEMGXL Management block.
-- interrupts: Should contain macb interrupt
-- phy-mode: See ethernet.txt file in the same directory.
-- clock-names: Tuple listing input clock names.
-	Required elements: 'pclk', 'hclk'
-	Optional elements: 'tx_clk'
-	Optional elements: 'rx_clk' applies to cdns,zynqmp-gem
-	Optional elements: 'tsu_clk'
-- clocks: Phandles to input clocks.
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt.
-
-Optional properties for PHY child node:
-- reset-gpios : Should specify the gpio for phy reset
-- magic-packet : If present, indicates that the hardware supports waking
-  up via magic packet.
-- phy-handle : see ethernet.txt file in the same directory
-
-Examples:
-
-	macb0: ethernet@fffc4000 {
-		compatible = "cdns,at32ap7000-macb";
-		reg = <0xfffc4000 0x4000>;
-		interrupts = <21>;
-		phy-mode = "rmii";
-		local-mac-address = [3a 0e 03 04 05 06];
-		clock-names = "pclk", "hclk", "tx_clk";
-		clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
-		ethernet-phy@1 {
-			reg = <0x1>;
-			reset-gpios = <&pioE 6 1>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/marvell,dfx-server.yaml b/Documentation/devicetree/bindings/net/marvell,dfx-server.yaml
new file mode 100644
index 000000000000..8a14c919e3f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,dfx-server.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,dfx-server.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Prestera DFX server
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: marvell,dfx-server
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: marvell,dfx-server
+      - const: simple-bus
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+# The DFX server may expose clocks described as subnodes
+additionalProperties:
+  type: object
+
+examples:
+  - |
+
+    #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+    bus@0 {
+        reg = <0 0>;
+        #address-cells = <2>;
+        #size-cells = <1>;
+
+        dfx-bus@ac000000 {
+            compatible = "marvell,dfx-server", "simple-bus";
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+            reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
index 8e288ab38fd7..3a3325168048 100644
--- a/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
+++ b/Documentation/devicetree/bindings/net/marvell,mvusb.yaml
@@ -20,7 +20,7 @@ description: |+
   definition.
 
 allOf:
-  - $ref: "mdio.yaml#"
+  - $ref: mdio.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
new file mode 100644
index 000000000000..e35da8b01dc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,orion-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell MDIO Ethernet Controller interface
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+
+description: |
+  The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, MV78xx0,
+  Armada 370, Armada XP, Armada 7k and Armada 8k have an identical unit that
+  provides an interface with the MDIO bus. Additionally, Armada 7k and Armada
+  8k has a second unit which provides an interface with the xMDIO bus. This
+  driver handles these interfaces.
+
+properties:
+  compatible:
+    enum:
+      - marvell,orion-mdio
+      - marvell,xmdio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: mdio.yaml#
+
+  - if:
+      required:
+        - interrupts
+
+    then:
+      properties:
+        reg:
+          items:
+            - items:
+                - $ref: /schemas/types.yaml#/definitions/cell
+                - const: 0x84
+
+    else:
+      properties:
+        reg:
+          items:
+            - items:
+                - $ref: /schemas/types.yaml#/definitions/cell
+                - enum:
+                    - 0x4
+                    - 0x10
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@d0072004 {
+      compatible = "marvell,orion-mdio";
+      reg = <0xd0072004 0x84>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      interrupts = <30>;
+
+      phy0: ethernet-phy@0 {
+        reg = <0>;
+      };
+
+      phy1: ethernet-phy@1 {
+        reg = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell,pp2.yaml b/Documentation/devicetree/bindings/net/marvell,pp2.yaml
new file mode 100644
index 000000000000..4eadafc43d4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,pp2.yaml
@@ -0,0 +1,305 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,pp2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell CN913X / Marvell Armada 375, 7K, 8K Ethernet Controller
+
+maintainers:
+  - Marcin Wojtas <mw@semihalf.com>
+  - Russell King <linux@armlinux.org>
+
+description: |
+  Marvell Armada 375 Ethernet Controller (PPv2.1)
+  Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
+  Marvell CN913X Ethernet Controller (PPv2.3)
+
+properties:
+  compatible:
+    enum:
+      - marvell,armada-375-pp2
+      - marvell,armada-7k-pp22
+
+  reg:
+    minItems: 3
+    maxItems: 4
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  clocks:
+    minItems: 2
+    items:
+      - description: main controller clock
+      - description: GOP clock
+      - description: MG clock
+      - description: MG Core clock
+      - description: AXI clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: pp_clk
+      - const: gop_clk
+      - const: mg_clk
+      - const: mg_core_clk
+      - const: axi_clk
+
+  dma-coherent: true
+
+  marvell,system-controller:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: a phandle to the system controller.
+
+patternProperties:
+  '^(ethernet-)?port@[0-2]$':
+    type: object
+    description: subnode for each ethernet port.
+    $ref: ethernet-controller.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description: ID of the port from the MAC point of view.
+        maximum: 2
+
+      interrupts:
+        minItems: 1
+        maxItems: 10
+        description: interrupt(s) for the port
+
+      interrupt-names:
+        minItems: 1
+        items:
+          - const: hif0
+          - const: hif1
+          - const: hif2
+          - const: hif3
+          - const: hif4
+          - const: hif5
+          - const: hif6
+          - const: hif7
+          - const: hif8
+          - const: link
+
+        description: >
+          if more than a single interrupt for is given, must be the
+          name associated to the interrupts listed. Valid names are:
+          "hifX", with X in [0..8], and "link". The names "tx-cpu0",
+          "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
+          for backward compatibility but shouldn't be used for new
+          additions.
+
+      phys:
+        minItems: 1
+        maxItems: 2
+        description: >
+          Generic PHY, providing SerDes connectivity. For most modes,
+          one lane is sufficient, but some (e.g. RXAUI) may require two.
+
+      phy-mode:
+        enum:
+          - gmii
+          - sgmii
+          - rgmii-id
+          - 1000base-x
+          - 2500base-x
+          - 5gbase-r
+          - rxaui
+          - 10gbase-r
+
+      port-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        deprecated: true
+        description: >
+          ID of the port from the MAC point of view.
+          Legacy binding for backward compatibility.
+
+      marvell,loopback:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description: port is loopback mode.
+
+      gop-port-id:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: >
+          only for marvell,armada-7k-pp22, ID of the port from the
+          GOP (Group Of Ports) point of view. This ID is used to index the
+          per-port registers in the second register area.
+
+    required:
+      - reg
+      - interrupts
+      - phy-mode
+      - port-id
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: marvell,armada-7k-pp22
+    then:
+      properties:
+        reg:
+          items:
+            - description: Packet Processor registers
+            - description: Networking interfaces registers
+            - description: CM3 address space used for TX Flow Control
+
+        clocks:
+          minItems: 5
+
+        clock-names:
+          minItems: 5
+
+      patternProperties:
+        '^(ethernet-)?port@[0-2]$':
+          required:
+            - gop-port-id
+
+      required:
+        - marvell,system-controller
+    else:
+      properties:
+        reg:
+          items:
+            - description: Packet Processor registers
+            - description: LMS registers
+            - description: Register area per eth0
+            - description: Register area per eth1
+
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
+      patternProperties:
+        '^(ethernet-)?port@[0-1]$':
+          properties:
+            reg:
+              maximum: 1
+
+            gop-port-id: false
+
+additionalProperties: false
+
+examples:
+  - |
+    // For Armada 375 variant
+    #include <dt-bindings/interrupt-controller/mvebu-icu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@f0000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "marvell,armada-375-pp2";
+        reg = <0xf0000 0xa000>,
+              <0xc0000 0x3060>,
+              <0xc4000 0x100>,
+              <0xc5000 0x100>;
+        clocks = <&gateclk 3>, <&gateclk 19>;
+        clock-names = "pp_clk", "gop_clk";
+
+        ethernet-port@0 {
+            interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+            reg = <0>;
+            port-id = <0>; /* For backward compatibility. */
+            phy = <&phy0>;
+            phy-mode = "rgmii-id";
+        };
+
+        ethernet-port@1 {
+            interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+            reg = <1>;
+            port-id = <1>; /* For backward compatibility. */
+            phy = <&phy3>;
+            phy-mode = "gmii";
+        };
+    };
+
+  - |
+    // For Armada 7k/8k and Cn913x variants
+    #include <dt-bindings/interrupt-controller/mvebu-icu.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "marvell,armada-7k-pp22";
+        reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
+        clocks = <&cp0_clk 1 3>, <&cp0_clk 1 9>,
+                 <&cp0_clk 1 5>, <&cp0_clk 1 6>, <&cp0_clk 1 18>;
+        clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
+        marvell,system-controller = <&cp0_syscon0>;
+
+        ethernet-port@0 {
+            interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+                              "hif5", "hif6", "hif7", "hif8", "link";
+            phy-mode = "10gbase-r";
+            phys = <&cp0_comphy4 0>;
+            reg = <0>;
+            port-id = <0>; /* For backward compatibility. */
+            gop-port-id = <0>;
+        };
+
+        ethernet-port@1 {
+            interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+                              "hif5", "hif6", "hif7", "hif8", "link";
+            phy-mode = "rgmii-id";
+            reg = <1>;
+            port-id = <1>; /* For backward compatibility. */
+            gop-port-id = <2>;
+        };
+
+        ethernet-port@2 {
+            interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
+                         <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
+                              "hif5", "hif6", "hif7", "hif8", "link";
+            phy-mode = "2500base-x";
+            managed = "in-band-status";
+            phys = <&cp0_comphy5 2>;
+            sfp = <&sfp_eth3>;
+            reg = <2>;
+            port-id = <2>; /* For backward compatibility. */
+            gop-port-id = <3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt
deleted file mode 100644
index e28938ddfdf5..000000000000
--- a/Documentation/devicetree/bindings/net/marvell,prestera.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Marvell Prestera Switch Chip bindings
--------------------------------------
-
-Required properties:
-- compatible: must be "marvell,prestera" and one of the following
-	"marvell,prestera-98dx3236",
-	"marvell,prestera-98dx3336",
-	"marvell,prestera-98dx4251",
-- reg: address and length of the register set for the device.
-- interrupts: interrupt for the device
-
-Optional properties:
-- dfx: phandle reference to the "DFX Server" node
-
-Example:
-
-switch {
-	compatible = "simple-bus";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
-
-	packet-processor@0 {
-		compatible = "marvell,prestera-98dx3236", "marvell,prestera";
-		reg = <0 0x4000000>;
-		interrupts = <33>, <34>, <35>;
-		dfx = <&dfx>;
-	};
-};
-
-DFX Server bindings
--------------------
-
-Required properties:
-- compatible: must be "marvell,dfx-server", "simple-bus"
-- ranges: describes the address mapping of a memory-mapped bus.
-- reg: address and length of the register set for the device.
-
-Example:
-
-dfx-server {
-	compatible = "marvell,dfx-server", "simple-bus";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
-	reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
-};
-
-Marvell Prestera SwitchDev bindings
------------------------------------
-Optional properties:
-- compatible: must be "marvell,prestera"
-- base-mac-provider: describes handle to node which provides base mac address,
-	might be a static base mac address or nvme cell provider.
-
-Example:
-
-eeprom_mac_addr: eeprom-mac-addr {
-       compatible = "eeprom,mac-addr-cell";
-       status = "okay";
-
-       nvmem = <&eeprom_at24>;
-};
-
-prestera {
-       compatible = "marvell,prestera";
-       status = "okay";
-
-       base-mac-provider = <&eeprom_mac_addr>;
-};
-
-The current implementation of Prestera Switchdev PCI interface driver requires
-that BAR2 is assigned to 0xf6000000 as base address from the PCI IO range:
-
-&cp0_pcie0 {
-	ranges = <0x81000000 0x0 0xfb000000 0x0 0xfb000000 0x0 0xf0000
-		0x82000000 0x0 0xf6000000 0x0 0xf6000000 0x0 0x2000000
-		0x82000000 0x0 0xf9000000 0x0 0xf9000000 0x0 0x100000>;
-	phys = <&cp0_comphy0 0>;
-	status = "okay";
-};
diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.yaml b/Documentation/devicetree/bindings/net/marvell,prestera.yaml
new file mode 100644
index 000000000000..5ea8b73663a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,prestera.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,prestera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Prestera switch family
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - marvell,prestera-98dx3236
+              - marvell,prestera-98dx3336
+              - marvell,prestera-98dx4251
+          - const: marvell,prestera
+      - enum:
+          - pci11ab,c804
+          - pci11ab,c80c
+          - pci11ab,cc1e
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 3
+
+  dfx:
+    description: Reference to the DFX Server bus node.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  nvmem-cells: true
+
+  nvmem-cell-names: true
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: marvell,prestera
+
+# Memory mapped AlleyCat3 family
+then:
+  properties:
+    nvmem-cells: false
+    nvmem-cell-names: false
+  required:
+    - interrupts
+
+# PCI Aldrin family
+else:
+  properties:
+    interrupts: false
+    dfx: false
+
+required:
+  - compatible
+  - reg
+
+# Ports can also be described
+additionalProperties:
+  type: object
+
+examples:
+  - |
+    packet-processor@0 {
+        compatible = "marvell,prestera-98dx3236", "marvell,prestera";
+        reg = <0 0x4000000>;
+        interrupts = <33>, <34>, <35>;
+        dfx = <&dfx>;
+    };
+
+  - |
+    pcie@0 {
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x0 0x0 0x0>;
+        reg = <0x0 0x0 0x0 0x0 0x0 0x0>;
+        device_type = "pci";
+
+        switch@0,0 {
+            reg = <0x0 0x0 0x0 0x0 0x0>;
+            compatible = "pci11ab,c80c";
+            nvmem-cells = <&mac_address 0>;
+            nvmem-cell-names = "mac-address";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index 691f886cfc4a..2bf31572b08d 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -5,6 +5,7 @@ Required properties:
 	"marvell,armada-370-neta"
 	"marvell,armada-xp-neta"
 	"marvell,armada-3700-neta"
+	"marvell,armada-ac5-neta"
 - reg: address and length of the register set for the device.
 - interrupts: interrupt for the device
 - phy: See ethernet.txt file in the same directory.
diff --git a/Documentation/devicetree/bindings/net/marvell-bluetooth.txt b/Documentation/devicetree/bindings/net/marvell-bluetooth.txt
deleted file mode 100644
index 0e2842296032..000000000000
--- a/Documentation/devicetree/bindings/net/marvell-bluetooth.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Marvell Bluetooth Chips
------------------------
-
-This documents the binding structure and common properties for serial
-attached Marvell Bluetooth devices. The following chips are included in
-this binding:
-
-* Marvell 88W8897 Bluetooth devices
-
-Required properties:
- - compatible: should be:
-    "mrvl,88w8897"
-
-Optional properties:
-None so far
-
-Example:
-
-&serial0 {
-	compatible = "ns16550a";
-	...
-	bluetooth {
-		compatible = "mrvl,88w8897";
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml b/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml
new file mode 100644
index 000000000000..188a42ca6ceb
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-bluetooth.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Bluetooth chips
+
+description: |
+  This documents the binding structure and common properties for serial
+  attached Marvell Bluetooth devices.
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - mrvl,88w8897
+      - mrvl,88w8997
+
+  max-speed:
+    description: see Documentation/devicetree/bindings/serial/serial.yaml
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mrvl,88w8997
+    then:
+      properties:
+        max-speed: true
+    else:
+      properties:
+        max-speed: false
+
+additionalProperties: false
+
+examples:
+  - |
+    serial {
+      bluetooth {
+        compatible = "mrvl,88w8897";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
deleted file mode 100644
index 3f3cfc1d8d4d..000000000000
--- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* Marvell MDIO Ethernet Controller interface
-
-The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x,
-MV78xx0, Armada 370, Armada XP, Armada 7k and Armada 8k have an
-identical unit that provides an interface with the MDIO bus.
-Additionally, Armada 7k and Armada 8k has a second unit which
-provides an interface with the xMDIO bus. This driver handles
-these interfaces.
-
-Required properties:
-- compatible: "marvell,orion-mdio" or "marvell,xmdio"
-- reg: address and length of the MDIO registers.  When an interrupt is
-  not present, the length is the size of the SMI register (4 bytes)
-  otherwise it must be 0x84 bytes to cover the interrupt control
-  registers.
-
-Optional properties:
-- interrupts: interrupt line number for the SMI error/done interrupt
-- clocks: phandle for up to four required clocks for the MDIO instance
-
-The child nodes of the MDIO driver are the individual PHY devices
-connected to this MDIO bus. They must have a "reg" property given the
-PHY address on the MDIO bus.
-
-Example at the SoC level without an interrupt property:
-
-mdio {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "marvell,orion-mdio";
-	reg = <0xd0072004 0x4>;
-};
-
-Example with an interrupt property:
-
-mdio {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "marvell,orion-mdio";
-	reg = <0xd0072004 0x84>;
-	interrupts = <30>;
-};
-
-And at the board level:
-
-mdio {
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-
-	phy1: ethernet-phy@1 {
-		reg = <1>;
-	};
-}
diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt
deleted file mode 100644
index ce15c173f43f..000000000000
--- a/Documentation/devicetree/bindings/net/marvell-pp2.txt
+++ /dev/null
@@ -1,141 +0,0 @@
-* Marvell Armada 375 Ethernet Controller (PPv2.1)
-  Marvell Armada 7K/8K Ethernet Controller (PPv2.2)
-  Marvell CN913X Ethernet Controller (PPv2.3)
-
-Required properties:
-
-- compatible: should be one of:
-    "marvell,armada-375-pp2"
-    "marvell,armada-7k-pp2"
-- reg: addresses and length of the register sets for the device.
-  For "marvell,armada-375-pp2", must contain the following register
-  sets:
-	- common controller registers
-	- LMS registers
-	- one register area per Ethernet port
-  For "marvell,armada-7k-pp2" used by 7K/8K and CN913X, must contain the following register
-  sets:
-	- packet processor registers
-	- networking interfaces registers
-	- CM3 address space used for TX Flow Control
-
-- clocks: pointers to the reference clocks for this device, consequently:
-	- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
-	- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
-	- MG clock (only for armada-7k-pp2)
-	- MG Core clock (only for armada-7k-pp2)
-	- AXI clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
-  "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).
-
-The ethernet ports are represented by subnodes. At least one port is
-required.
-
-Required properties (port):
-
-- interrupts: interrupt(s) for the port
-- port-id: ID of the port from the MAC point of view
-- gop-port-id: only for marvell,armada-7k-pp2, ID of the port from the
-  GOP (Group Of Ports) point of view. This ID is used to index the
-  per-port registers in the second register area.
-- phy-mode: See ethernet.txt file in the same directory
-
-Optional properties (port):
-
-- marvell,loopback: port is loopback mode
-- phy: a phandle to a phy node defining the PHY address (as the reg
-  property, a single integer).
-- interrupt-names: if more than a single interrupt for is given, must be the
-                   name associated to the interrupts listed. Valid names are:
-                   "hifX", with X in [0..8], and "link". The names "tx-cpu0",
-                   "tx-cpu1", "tx-cpu2", "tx-cpu3" and "rx-shared" are supported
-                   for backward compatibility but shouldn't be used for new
-                   additions.
-- marvell,system-controller: a phandle to the system controller.
-
-Example for marvell,armada-375-pp2:
-
-ethernet@f0000 {
-	compatible = "marvell,armada-375-pp2";
-	reg = <0xf0000 0xa000>,
-	      <0xc0000 0x3060>,
-	      <0xc4000 0x100>,
-	      <0xc5000 0x100>;
-	clocks = <&gateclk 3>, <&gateclk 19>;
-	clock-names = "pp_clk", "gop_clk";
-
-	eth0: eth0@c4000 {
-		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-		port-id = <0>;
-		phy = <&phy0>;
-		phy-mode = "gmii";
-	};
-
-	eth1: eth1@c5000 {
-		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-		port-id = <1>;
-		phy = <&phy3>;
-		phy-mode = "gmii";
-	};
-};
-
-Example for marvell,armada-7k-pp2:
-
-cpm_ethernet: ethernet@0 {
-	compatible = "marvell,armada-7k-pp22";
-	reg = <0x0 0x100000>, <0x129000 0xb000>, <0x220000 0x800>;
-	clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
-		 <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
-	clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
-
-	eth0: eth0 {
-		interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 59 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 63 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 67 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 71 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
-				  "hif5", "hif6", "hif7", "hif8", "link";
-		port-id = <0>;
-		gop-port-id = <0>;
-	};
-
-	eth1: eth1 {
-		interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 60 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 64 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 68 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 72 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
-				  "hif5", "hif6", "hif7", "hif8", "link";
-		port-id = <1>;
-		gop-port-id = <2>;
-	};
-
-	eth2: eth2 {
-		interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 61 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 65 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 69 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 73 IRQ_TYPE_LEVEL_HIGH>,
-			     <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "hif0", "hif1", "hif2", "hif3", "hif4",
-				  "hif5", "hif6", "hif7", "hif8", "link";
-		port-id = <2>;
-		gop-port-id = <3>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
new file mode 100644
index 000000000000..d71fa9de2b64
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/maxlinear,gpy2xx.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/maxlinear,gpy2xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MaxLinear GPY2xx PHY
+
+maintainers:
+  - Andrew Lunn <andrew@lunn.ch>
+  - Michael Walle <michael@walle.cc>
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  maxlinear,use-broken-interrupts:
+    description: |
+      Interrupts are broken on some GPY2xx PHYs in that they keep the
+      interrupt line asserted even after the interrupt status register is
+      cleared. Thus it is blocking the interrupt line which is usually bad
+      for shared lines. By default interrupts are disabled for this PHY and
+      polling mode is used. If one can live with the consequences, this
+      property can be used to enable interrupt handling.
+
+      Affected PHYs (as far as known) are GPY215B and GPY215C.
+    type: boolean
+
+dependencies:
+  maxlinear,use-broken-interrupts: [ interrupts ]
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            reg = <0>;
+            interrupts-extended = <&intc 0>;
+            maxlinear,use-broken-interrupts;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml b/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml
new file mode 100644
index 000000000000..8438af53c5c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mctp-i2c-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MCTP I2C transport
+
+maintainers:
+  - Matt Johnston <matt@codeconstruct.com.au>
+
+description: |
+  An mctp-i2c-controller defines a local MCTP endpoint on an I2C controller.
+  MCTP I2C is specified by DMTF DSP0237.
+
+  An mctp-i2c-controller must be attached to an I2C adapter which supports
+  slave functionality. I2C busses (either directly or as subordinate mux
+  busses) are attached to the mctp-i2c-controller with a 'mctp-controller'
+  property on each used bus. Each mctp-controller I2C bus will be presented
+  to the host system as a separate MCTP I2C instance.
+
+properties:
+  compatible:
+    const: mctp-i2c-controller
+
+  reg:
+    minimum: 0x40000000
+    maximum: 0x4000007f
+    description: |
+      7 bit I2C address of the local endpoint.
+      I2C_OWN_SLAVE_ADDRESS (1<<30) flag must be set.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    // Basic case of a single I2C bus
+    #include <dt-bindings/i2c/i2c.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mctp-controller;
+
+      mctp@30 {
+        compatible = "mctp-i2c-controller";
+        reg = <(0x30 | I2C_OWN_SLAVE_ADDRESS)>;
+      };
+    };
+
+  - |
+    // Mux topology with multiple MCTP-handling busses under
+    // a single mctp-i2c-controller.
+    // i2c1 and i2c6 can have MCTP devices, i2c5 does not.
+    #include <dt-bindings/i2c/i2c.h>
+
+    i2c1: i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      mctp-controller;
+
+      mctp@50 {
+        compatible = "mctp-i2c-controller";
+        reg = <(0x50 | I2C_OWN_SLAVE_ADDRESS)>;
+      };
+    };
+
+    i2c-mux {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      i2c-parent = <&i2c1>;
+
+      i2c5: i2c@0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0>;
+        eeprom@33 {
+          reg = <0x33>;
+        };
+      };
+
+      i2c6: i2c@1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <1>;
+        mctp-controller;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-gpio.yaml
index 1d83b8dcce2c..eb4171a1940e 100644
--- a/Documentation/devicetree/bindings/net/mdio-gpio.yaml
+++ b/Documentation/devicetree/bindings/net/mdio-gpio.yaml
@@ -12,7 +12,7 @@ maintainers:
   - Russell King <linux@armlinux.org.uk>
 
 allOf:
-  - $ref: "mdio.yaml#"
+  - $ref: mdio.yaml#
 
 properties:
   compatible:
@@ -33,8 +33,8 @@ properties:
       - description: MDIO
       - description: MDO
 
-#Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
-#node.
+# Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
+# node.
 additionalProperties:
   type: object
 
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt b/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt
deleted file mode 100644
index 3a96cbed9294..000000000000
--- a/Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Properties for the MDIO bus multiplexer/glue of Amlogic G12a SoC family.
-
-This is a special case of a MDIO bus multiplexer. It allows to choose between
-the internal mdio bus leading to the embedded 10/100 PHY or the external
-MDIO bus.
-
-Required properties in addition to the generic multiplexer properties:
-- compatible : amlogic,g12a-mdio-mux
-- reg: physical address and length of the multiplexer/glue registers
-- clocks: list of clock phandle, one for each entry clock-names.
-- clock-names: should contain the following:
-  * "pclk"   : peripheral clock.
-  * "clkin0" : platform crytal
-  * "clkin1" : SoC 50MHz MPLL
-
-Example :
-
-mdio_mux: mdio-multiplexer@4c000 {
-	compatible = "amlogic,g12a-mdio-mux";
-	reg = <0x0 0x4c000 0x0 0xa4>;
-	clocks = <&clkc CLKID_ETH_PHY>,
-		 <&xtal>,
-		 <&clkc CLKID_MPLL_5OM>;
-	clock-names = "pclk", "clkin0", "clkin1";
-	mdio-parent-bus = <&mdio0>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	ext_mdio: mdio@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	int_mdio: mdio@1 {
-		reg = <1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		internal_ephy: ethernet-phy@8 {
-			compatible = "ethernet-phy-id0180.3301",
-				     "ethernet-phy-ieee802.3-c22";
-			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <8>;
-			max-speed = <100>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/mdio-mux.yaml b/Documentation/devicetree/bindings/net/mdio-mux.yaml
index d169adf5d9f4..4321c87de86f 100644
--- a/Documentation/devicetree/bindings/net/mdio-mux.yaml
+++ b/Documentation/devicetree/bindings/net/mdio-mux.yaml
@@ -15,9 +15,6 @@ description: |+
   bus multiplexer/switch will have one child node for each child bus.
 
 properties:
-  $nodename:
-    pattern: '^mdio-mux[\-@]?'
-
   mdio-parent-bus:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -32,12 +29,12 @@ properties:
 
 patternProperties:
   '^mdio@[0-9a-f]+$':
-    type: object
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
 
     properties:
       reg:
         maxItems: 1
-        description: The sub-bus number.
 
 additionalProperties: true
 
diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml
index 08e15fb1584f..a266ade918ca 100644
--- a/Documentation/devicetree/bindings/net/mdio.yaml
+++ b/Documentation/devicetree/bindings/net/mdio.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/mdio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MDIO Bus Generic Binding
+title: MDIO Bus Common Properties
 
 maintainers:
   - Andrew Lunn <andrew@lunn.ch>
@@ -59,7 +59,7 @@ properties:
     type: boolean
 
 patternProperties:
-  "^ethernet-phy@[0-9a-f]+$":
+  '@[0-9a-f]+$':
     type: object
 
     properties:
@@ -76,12 +76,6 @@ patternProperties:
           the turn around line low at end of the control phase of the
           MDIO transaction.
 
-      resets:
-        maxItems: 1
-
-      reset-names:
-        const: phy
-
       reset-gpios:
         maxItems: 1
         description:
diff --git a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt b/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
deleted file mode 100644
index 358fed2fab43..000000000000
--- a/Documentation/devicetree/bindings/net/mediatek,mt7620-gsw.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Mediatek Gigabit Switch
-=======================
-
-The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621).
-
-Required properties:
-- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the gigabit switches interrupt
-- resets: Should contain the gigabit switches resets
-- reset-names: Should contain the reset names "gsw"
-
-Example:
-
-gsw@10110000 {
-	compatible = "ralink,mt7620-gsw";
-	reg = <0x10110000 8000>;
-
-	resets = <&rstctrl 23>;
-	reset-names = "gsw";
-
-	interrupt-parent = <&intc>;
-	interrupts = <17>;
-};
diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml
new file mode 100644
index 000000000000..acb2b2ac4fe1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml
@@ -0,0 +1,489 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mediatek,net.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Frame Engine Ethernet controller
+
+maintainers:
+  - Lorenzo Bianconi <lorenzo@kernel.org>
+  - Felix Fietkau <nbd@nbd.name>
+
+description:
+  The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs
+  have dual GMAC ports.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt2701-eth
+      - mediatek,mt7623-eth
+      - mediatek,mt7622-eth
+      - mediatek,mt7629-eth
+      - mediatek,mt7981-eth
+      - mediatek,mt7986-eth
+      - ralink,rt5350-eth
+
+  reg:
+    maxItems: 1
+
+  clocks: true
+  clock-names: true
+
+  interrupts:
+    minItems: 3
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: fe
+      - const: gmac
+      - const: ppe
+
+  mediatek,ethsys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon node that handles the port setup.
+
+  cci-control-port: true
+
+  mediatek,hifsys:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the mediatek hifsys controller used to provide various clocks
+      and reset to the system.
+
+  mediatek,sgmiisys:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    maxItems: 2
+    items:
+      maxItems: 1
+    description:
+      A list of phandle to the syscon node that handles the SGMII setup which is required for
+      those SoCs equipped with SGMII.
+
+  mediatek,wed:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 2
+    maxItems: 2
+    items:
+      maxItems: 1
+    description:
+      List of phandles to wireless ethernet dispatch nodes.
+
+  mediatek,wed-pcie:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the mediatek wed-pcie controller.
+
+  dma-coherent: true
+
+  mdio-bus:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt2701-eth
+              - mediatek,mt7623-eth
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+
+        clocks:
+          minItems: 4
+          maxItems: 4
+
+        clock-names:
+          items:
+            - const: ethif
+            - const: esw
+            - const: gp1
+            - const: gp2
+
+        mediatek,pctl:
+          $ref: /schemas/types.yaml#/definitions/phandle
+          description:
+            Phandle to the syscon node that handles the ports slew rate and
+            driver current.
+
+        mediatek,wed: false
+
+        mediatek,wed-pcie: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7622-eth
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+
+        clocks:
+          minItems: 11
+          maxItems: 11
+
+        clock-names:
+          items:
+            - const: ethif
+            - const: esw
+            - const: gp0
+            - const: gp1
+            - const: gp2
+            - const: sgmii_tx250m
+            - const: sgmii_rx250m
+            - const: sgmii_cdr_ref
+            - const: sgmii_cdr_fb
+            - const: sgmii_ck
+            - const: eth2pll
+
+        mediatek,sgmiisys:
+          minItems: 1
+          maxItems: 1
+
+        mediatek,pcie-mirror:
+          $ref: /schemas/types.yaml#/definitions/phandle
+          description:
+            Phandle to the mediatek pcie-mirror controller.
+
+        mediatek,wed-pcie: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7629-eth
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+
+        clocks:
+          minItems: 17
+          maxItems: 17
+
+        clock-names:
+          items:
+            - const: ethif
+            - const: sgmiitop
+            - const: esw
+            - const: gp0
+            - const: gp1
+            - const: gp2
+            - const: fe
+            - const: sgmii_tx250m
+            - const: sgmii_rx250m
+            - const: sgmii_cdr_ref
+            - const: sgmii_cdr_fb
+            - const: sgmii2_tx250m
+            - const: sgmii2_rx250m
+            - const: sgmii2_cdr_ref
+            - const: sgmii2_cdr_fb
+            - const: sgmii_ck
+            - const: eth2pll
+
+        mediatek,infracfg:
+          $ref: /schemas/types.yaml#/definitions/phandle
+          description:
+            Phandle to the syscon node that handles the path from GMAC to
+            PHY variants.
+
+        mediatek,sgmiisys:
+          minItems: 2
+          maxItems: 2
+
+        mediatek,wed: false
+
+        mediatek,wed-pcie: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7981-eth
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+
+        clocks:
+          minItems: 15
+          maxItems: 15
+
+        clock-names:
+          items:
+            - const: fe
+            - const: gp2
+            - const: gp1
+            - const: wocpu0
+            - const: sgmii_ck
+            - const: sgmii_tx250m
+            - const: sgmii_rx250m
+            - const: sgmii_cdr_ref
+            - const: sgmii_cdr_fb
+            - const: sgmii2_tx250m
+            - const: sgmii2_rx250m
+            - const: sgmii2_cdr_ref
+            - const: sgmii2_cdr_fb
+            - const: netsys0
+            - const: netsys1
+
+        mediatek,sgmiisys:
+          minItems: 2
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt7986-eth
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+
+        clocks:
+          minItems: 15
+          maxItems: 15
+
+        clock-names:
+          items:
+            - const: fe
+            - const: gp2
+            - const: gp1
+            - const: wocpu1
+            - const: wocpu0
+            - const: sgmii_tx250m
+            - const: sgmii_rx250m
+            - const: sgmii_cdr_ref
+            - const: sgmii_cdr_fb
+            - const: sgmii2_tx250m
+            - const: sgmii2_rx250m
+            - const: sgmii2_cdr_ref
+            - const: sgmii2_cdr_fb
+            - const: netsys0
+            - const: netsys1
+
+        mediatek,sgmiisys:
+          minItems: 2
+          maxItems: 2
+
+patternProperties:
+  "^mac@[0-1]$":
+    type: object
+    additionalProperties: false
+    allOf:
+      - $ref: ethernet-controller.yaml#
+    description:
+      Ethernet MAC node
+    properties:
+      compatible:
+        const: mediatek,eth-mac
+
+      reg:
+        maxItems: 1
+
+      phy-handle: true
+
+      phy-mode: true
+
+    required:
+      - reg
+      - compatible
+      - phy-handle
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - mediatek,ethsys
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt7622-clk.h>
+    #include <dt-bindings/power/mt7622-power.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      ethernet: ethernet@1b100000 {
+        compatible = "mediatek,mt7622-eth";
+        reg = <0 0x1b100000 0 0x20000>;
+        interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
+                     <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
+                     <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+        clocks = <&topckgen CLK_TOP_ETH_SEL>,
+                 <&ethsys CLK_ETH_ESW_EN>,
+                 <&ethsys CLK_ETH_GP0_EN>,
+                 <&ethsys CLK_ETH_GP1_EN>,
+                 <&ethsys CLK_ETH_GP2_EN>,
+                 <&sgmiisys CLK_SGMII_TX250M_EN>,
+                 <&sgmiisys CLK_SGMII_RX250M_EN>,
+                 <&sgmiisys CLK_SGMII_CDR_REF>,
+                 <&sgmiisys CLK_SGMII_CDR_FB>,
+                 <&topckgen CLK_TOP_SGMIIPLL>,
+                 <&apmixedsys CLK_APMIXED_ETH2PLL>;
+        clock-names = "ethif", "esw", "gp0", "gp1", "gp2",
+                      "sgmii_tx250m", "sgmii_rx250m",
+                      "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck",
+                      "eth2pll";
+        power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+        mediatek,ethsys = <&ethsys>;
+        mediatek,sgmiisys = <&sgmiisys>;
+        cci-control-port = <&cci_control2>;
+        mediatek,pcie-mirror = <&pcie_mirror>;
+        mediatek,hifsys = <&hifsys>;
+        dma-coherent;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio0: mdio-bus {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          phy0: ethernet-phy@0 {
+            reg = <0>;
+          };
+
+          phy1: ethernet-phy@1 {
+            reg = <1>;
+          };
+        };
+
+        gmac0: mac@0 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "rgmii";
+          phy-handle = <&phy0>;
+          reg = <0>;
+        };
+
+        gmac1: mac@1 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "rgmii";
+          phy-handle = <&phy1>;
+          reg = <1>;
+        };
+      };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/mt7622-clk.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      eth: ethernet@15100000 {
+        #define CLK_ETH_FE_EN               0
+        #define CLK_ETH_WOCPU1_EN           3
+        #define CLK_ETH_WOCPU0_EN           4
+        #define CLK_TOP_NETSYS_SEL          43
+        #define CLK_TOP_NETSYS_500M_SEL     44
+        #define CLK_TOP_NETSYS_2X_SEL       46
+        #define CLK_TOP_SGM_325M_SEL        47
+        #define CLK_APMIXED_NET2PLL         1
+        #define CLK_APMIXED_SGMPLL          3
+
+        compatible = "mediatek,mt7986-eth";
+        reg = <0 0x15100000 0 0x80000>;
+        interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ethsys CLK_ETH_FE_EN>,
+                 <&ethsys CLK_ETH_GP2_EN>,
+                 <&ethsys CLK_ETH_GP1_EN>,
+                 <&ethsys CLK_ETH_WOCPU1_EN>,
+                 <&ethsys CLK_ETH_WOCPU0_EN>,
+                 <&sgmiisys0 CLK_SGMII_TX250M_EN>,
+                 <&sgmiisys0 CLK_SGMII_RX250M_EN>,
+                 <&sgmiisys0 CLK_SGMII_CDR_REF>,
+                 <&sgmiisys0 CLK_SGMII_CDR_FB>,
+                 <&sgmiisys1 CLK_SGMII_TX250M_EN>,
+                 <&sgmiisys1 CLK_SGMII_RX250M_EN>,
+                 <&sgmiisys1 CLK_SGMII_CDR_REF>,
+                 <&sgmiisys1 CLK_SGMII_CDR_FB>,
+                 <&topckgen CLK_TOP_NETSYS_SEL>,
+                 <&topckgen CLK_TOP_NETSYS_SEL>;
+        clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0",
+                      "sgmii_tx250m", "sgmii_rx250m",
+                      "sgmii_cdr_ref", "sgmii_cdr_fb",
+                      "sgmii2_tx250m", "sgmii2_rx250m",
+                      "sgmii2_cdr_ref", "sgmii2_cdr_fb",
+                      "netsys0", "netsys1";
+        mediatek,ethsys = <&ethsys>;
+        mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
+        assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
+                          <&topckgen CLK_TOP_SGM_325M_SEL>;
+        assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
+                                 <&apmixedsys CLK_APMIXED_SGMPLL>;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio: mdio-bus {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          phy5: ethernet-phy@0 {
+            compatible = "ethernet-phy-id67c9.de0a";
+            phy-mode = "2500base-x";
+            reset-gpios = <&pio 6 1>;
+            reset-deassert-us = <20000>;
+            reg = <5>;
+          };
+
+          phy6: ethernet-phy@1 {
+            compatible = "ethernet-phy-id67c9.de0a";
+            phy-mode = "2500base-x";
+            reg = <6>;
+          };
+        };
+
+        mac0: mac@0 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "2500base-x";
+          phy-handle = <&phy5>;
+          reg = <0>;
+        };
+
+        mac1: mac@1 {
+          compatible = "mediatek,eth-mac";
+          phy-mode = "2500base-x";
+          phy-handle = <&phy6>;
+          reg = <1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
index e6a5ff208253..2e889f9a563e 100644
--- a/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
+++ b/Documentation/devicetree/bindings/net/mediatek,star-emac.yaml
@@ -15,7 +15,7 @@ description:
   modes with flow-control as well as CRC offloading and VLAN tags.
 
 allOf:
-  - $ref: "ethernet-controller.yaml#"
+  - $ref: ethernet-controller.yaml#
 
 properties:
   compatible:
@@ -23,6 +23,7 @@ properties:
       - mediatek,mt8516-eth
       - mediatek,mt8518-eth
       - mediatek,mt8175-eth
+      - mediatek,mt8365-eth
 
   reg:
     maxItems: 1
@@ -47,10 +48,25 @@ properties:
       Phandle to the device containing the PERICFG register range. This is used
       to control the MII mode.
 
-  mdio:
-    type: object
+  mediatek,rmii-rxc:
+    type: boolean
+    description:
+      If present, indicates that the RMII reference clock, which is from external
+      PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
+
+  mediatek,rxc-inverse:
+    type: boolean
     description:
-      Creates and registers an MDIO bus.
+      If present, indicates that clock on RXC pad will be inversed.
+
+  mediatek,txc-inverse:
+    type: boolean
+    description:
+      If present, indicates that clock on TXC pad will be inversed.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
deleted file mode 100644
index afbcaebf062e..000000000000
--- a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt
+++ /dev/null
@@ -1,91 +0,0 @@
-MediaTek DWMAC glue layer controller
-
-This file documents platform glue layer for stmmac.
-Please see stmmac.txt for the other unchanged properties.
-
-The device node has following properties.
-
-Required properties:
-- compatible:  Should be "mediatek,mt2712-gmac" for MT2712 SoC
-- reg:  Address and length of the register set for the device
-- interrupts:  Should contain the MAC interrupts
-- interrupt-names: Should contain a list of interrupt names corresponding to
-	the interrupts in the interrupts property, if available.
-	Should be "macirq" for the main MAC IRQ
-- clocks: Must contain a phandle for each entry in clock-names.
-- clock-names: The name of the clock listed in the clocks property. These are
-	"axi", "apb", "mac_main", "ptp_ref", "rmii_internal" for MT2712 SoC.
-- mac-address: See ethernet.txt in the same directory
-- phy-mode: See ethernet.txt in the same directory
-- mediatek,pericfg: A phandle to the syscon node that control ethernet
-	interface and timing delay.
-
-Optional properties:
-- mediatek,tx-delay-ps: TX clock delay macro value. Default is 0.
-	It should be defined for RGMII/MII interface.
-	It should be defined for RMII interface when the reference clock is from MT2712 SoC.
-- mediatek,rx-delay-ps: RX clock delay macro value. Default is 0.
-	It should be defined for RGMII/MII interface.
-	It should be defined for RMII interface.
-Both delay properties need to be a multiple of 170 for RGMII interface,
-or will round down. Range 0~31*170.
-Both delay properties need to be a multiple of 550 for MII/RMII interface,
-or will round down. Range 0~31*550.
-
-- mediatek,rmii-rxc: boolean property, if present indicates that the RMII
-	reference clock, which is from external PHYs, is connected to RXC pin
-	on MT2712 SoC.
-	Otherwise, is connected to TXC pin.
-- mediatek,rmii-clk-from-mac: boolean property, if present indicates that
-	MT2712 SoC provides the RMII reference clock, which outputs to TXC pin only.
-- mediatek,txc-inverse: boolean property, if present indicates that
-	1. tx clock will be inversed in MII/RGMII case,
-	2. tx clock inside MAC will be inversed relative to reference clock
-	   which is from external PHYs in RMII case, and it rarely happen.
-	3. the reference clock, which outputs to TXC pin will be inversed in RMII case
-	   when the reference clock is from MT2712 SoC.
-- mediatek,rxc-inverse: boolean property, if present indicates that
-	1. rx clock will be inversed in MII/RGMII case.
-	2. reference clock will be inversed when arrived at MAC in RMII case, when
-	   the reference clock is from external PHYs.
-	3. the inside clock, which be sent to MAC, will be inversed in RMII case when
-	   the reference clock is from MT2712 SoC.
-- assigned-clocks: mac_main and ptp_ref clocks
-- assigned-clock-parents: parent clocks of the assigned clocks
-
-Example:
-	eth: ethernet@1101c000 {
-		compatible = "mediatek,mt2712-gmac";
-		reg = <0 0x1101c000 0 0x1300>;
-		interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-names = "macirq";
-		phy-mode ="rgmii-rxid";
-		mac-address = [00 55 7b b5 7d f7];
-		clock-names = "axi",
-			      "apb",
-			      "mac_main",
-			      "ptp_ref",
-			      "rmii_internal";
-		clocks = <&pericfg CLK_PERI_GMAC>,
-			 <&pericfg CLK_PERI_GMAC_PCLK>,
-			 <&topckgen CLK_TOP_ETHER_125M_SEL>,
-			 <&topckgen CLK_TOP_ETHER_50M_SEL>,
-			 <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
-		assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
-				  <&topckgen CLK_TOP_ETHER_50M_SEL>,
-				  <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
-		assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
-					 <&topckgen CLK_TOP_APLL1_D3>,
-					 <&topckgen CLK_TOP_ETHERPLL_50M>;
-		power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
-		mediatek,pericfg = <&pericfg>;
-		mediatek,tx-delay-ps = <1530>;
-		mediatek,rx-delay-ps = <1530>;
-		mediatek,rmii-rxc;
-		mediatek,txc-inverse;
-		mediatek,rxc-inverse;
-		snps,txpbl = <1>;
-		snps,rxpbl = <1>;
-		snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
-		snps,reset-active-low;
-	};
diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
new file mode 100644
index 000000000000..0fa2132fa4f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mediatek-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek DWMAC glue layer controller
+
+maintainers:
+  - Biao Huang <biao.huang@mediatek.com>
+
+description:
+  This file documents platform glue layer for stmmac.
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - mediatek,mt2712-gmac
+          - mediatek,mt8188-gmac
+          - mediatek,mt8195-gmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2712-gmac
+          - const: snps,dwmac-4.20a
+      - items:
+          - enum:
+              - mediatek,mt8195-gmac
+          - const: snps,dwmac-5.10a
+      - items:
+          - enum:
+              - mediatek,mt8188-gmac
+          - const: mediatek,mt8195-gmac
+          - const: snps,dwmac-5.10a
+
+  clocks:
+    minItems: 5
+    items:
+      - description: AXI clock
+      - description: APB clock
+      - description: MAC Main clock
+      - description: PTP clock
+      - description: RMII reference clock provided by MAC
+      - description: MAC clock gate
+
+  clock-names:
+    minItems: 5
+    items:
+      - const: axi
+      - const: apb
+      - const: mac_main
+      - const: ptp_ref
+      - const: rmii_internal
+      - const: mac_cg
+
+  power-domains:
+    maxItems: 1
+
+  mediatek,pericfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle to the syscon node that control ethernet
+      interface and timing delay.
+
+  mediatek,tx-delay-ps:
+    description:
+      The internal TX clock delay (provided by this driver) in nanoseconds.
+      For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
+      or will round down. Range 0~31*170.
+      For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
+      or will round down. Range 0~31*550.
+      For MT8188/MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple of 290,
+      or will round down. Range 0~31*290.
+
+  mediatek,rx-delay-ps:
+    description:
+      The internal RX clock delay (provided by this driver) in nanoseconds.
+      For MT2712 RGMII interface, Allowed value need to be a multiple of 170,
+      or will round down. Range 0~31*170.
+      For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550,
+      or will round down. Range 0~31*550.
+      For MT8188/MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple
+      of 290, or will round down. Range 0~31*290.
+
+  mediatek,rmii-rxc:
+    type: boolean
+    description:
+      If present, indicates that the RMII reference clock, which is from external
+      PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin.
+
+  mediatek,rmii-clk-from-mac:
+    type: boolean
+    description:
+      If present, indicates that MAC provides the RMII reference clock, which
+      outputs to TXC pin only.
+
+  mediatek,txc-inverse:
+    type: boolean
+    description:
+      If present, indicates that
+      1. tx clock will be inversed in MII/RGMII case,
+      2. tx clock inside MAC will be inversed relative to reference clock
+         which is from external PHYs in RMII case, and it rarely happen.
+      3. the reference clock, which outputs to TXC pin will be inversed in RMII case
+         when the reference clock is from MAC.
+
+  mediatek,rxc-inverse:
+    type: boolean
+    description:
+      If present, indicates that
+      1. rx clock will be inversed in MII/RGMII case.
+      2. reference clock will be inversed when arrived at MAC in RMII case, when
+         the reference clock is from external PHYs.
+      3. the inside clock, which be sent to MAC, will be inversed in RMII case when
+         the reference clock is from MAC.
+
+  mediatek,mac-wol:
+    type: boolean
+    description:
+      If present, indicates that MAC supports WOL(Wake-On-LAN), and MAC WOL will be enabled.
+      Otherwise, PHY WOL is perferred.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - phy-mode
+  - mediatek,pericfg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt2712-clk.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt2712-power.h>
+
+    eth: ethernet@1101c000 {
+        compatible = "mediatek,mt2712-gmac", "snps,dwmac-4.20a";
+        reg = <0x1101c000 0x1300>;
+        interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "macirq";
+        phy-mode ="rgmii-rxid";
+        mac-address = [00 55 7b b5 7d f7];
+        clock-names = "axi",
+                      "apb",
+                      "mac_main",
+                      "ptp_ref",
+                      "rmii_internal";
+        clocks = <&pericfg CLK_PERI_GMAC>,
+                 <&pericfg CLK_PERI_GMAC_PCLK>,
+                 <&topckgen CLK_TOP_ETHER_125M_SEL>,
+                 <&topckgen CLK_TOP_ETHER_50M_SEL>,
+                 <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
+        assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>,
+                          <&topckgen CLK_TOP_ETHER_50M_SEL>,
+                          <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>;
+        assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>,
+                                 <&topckgen CLK_TOP_APLL1_D3>,
+                                 <&topckgen CLK_TOP_ETHERPLL_50M>;
+        power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>;
+        mediatek,pericfg = <&pericfg>;
+        mediatek,tx-delay-ps = <1530>;
+        snps,txpbl = <1>;
+        snps,rxpbl = <1>;
+        snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>;
+        snps,reset-delays-us = <0 10000 10000>;
+    };
diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt
deleted file mode 100644
index 72d03e07cf7c..000000000000
--- a/Documentation/devicetree/bindings/net/mediatek-net.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-MediaTek Frame Engine Ethernet controller
-=========================================
-
-The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs
-have dual GMAC each represented by a child node..
-
-* Ethernet controller node
-
-Required properties:
-- compatible: Should be
-		"mediatek,mt2701-eth": for MT2701 SoC
-		"mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC
-		"mediatek,mt7622-eth": for MT7622 SoC
-		"mediatek,mt7629-eth": for MT7629 SoC
-		"ralink,rt5350-eth": for Ralink Rt5350F and MT7628/88 SoC
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the three frame engines interrupts in numeric
-	order. These are fe_int0, fe_int1 and fe_int2.
-- clocks: the clock used by the core
-- clock-names: the names of the clock listed in the clocks property. These are
-	"ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC
-        "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m",
-	"sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC
-	"ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2", "fe", "sgmii_tx250m",
-	"sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii2_tx250m",
-	"sgmii2_rx250m", "sgmii2_cdr_ref", "sgmii2_cdr_fb", "sgmii_ck",
-	"eth2pll" : For MT7629 SoC.
-- power-domains: phandle to the power domain that the ethernet is part of
-- resets: Should contain phandles to the ethsys reset signals
-- reset-names: Should contain the names of reset signal listed in the resets
-		property
-		These are "fe", "gmac" and "ppe"
-- mediatek,ethsys: phandle to the syscon node that handles the port setup
-- mediatek,infracfg: phandle to the syscon node that handles the path from
-	GMAC to PHY variants, which is required for MT7629 SoC.
-- mediatek,sgmiisys: a list of phandles to the syscon node that handles the
-	SGMII setup which is required for those SoCs equipped with SGMII such
-	as MT7622 and MT7629 SoC. And MT7622 have only one set of SGMII shared
-	by GMAC1 and GMAC2; MT7629 have two independent sets of SGMII directed
-	to GMAC1 and GMAC2, respectively.
-- mediatek,pctl: phandle to the syscon node that handles the ports slew rate
-	and driver current: only for MT2701 and MT7623 SoC
-
-* Ethernet MAC node
-
-Required properties:
-- compatible: Should be "mediatek,eth-mac"
-- reg: The number of the MAC
-- phy-handle: see ethernet.txt file in the same directory and
-	the phy-mode "trgmii" required being provided when reg
-	is equal to 0 and the MAC uses fixed-link to connect
-	with internal switch such as MT7530.
-
-Example:
-
-eth: ethernet@1b100000 {
-	compatible = "mediatek,mt7623-eth";
-	reg = <0 0x1b100000 0 0x20000>;
-	clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
-		 <&ethsys CLK_ETHSYS_ESW>,
-		 <&ethsys CLK_ETHSYS_GP2>,
-		 <&ethsys CLK_ETHSYS_GP1>;
-	clock-names = "ethif", "esw", "gp2", "gp1";
-	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW
-		      GIC_SPI 199 IRQ_TYPE_LEVEL_LOW
-		      GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
-	power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
-	resets = <&ethsys MT2701_ETHSYS_ETH_RST>;
-	reset-names = "eth";
-	mediatek,ethsys = <&ethsys>;
-	mediatek,pctl = <&syscfg_pctl_a>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	gmac1: mac@0 {
-		compatible = "mediatek,eth-mac";
-		reg = <0>;
-		phy-handle = <&phy0>;
-	};
-
-	gmac2: mac@1 {
-		compatible = "mediatek,eth-mac";
-		reg = <1>;
-		phy-handle = <&phy1>;
-	};
-
-	mdio-bus {
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			phy-mode = "rgmii";
-		};
-
-		phy1: ethernet-phy@1 {
-			reg = <1>;
-			phy-mode = "rgmii";
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml
index 5aa7cf2eacb1..b44d83554ef5 100644
--- a/Documentation/devicetree/bindings/net/micrel,ks8851.yaml
+++ b/Documentation/devicetree/bindings/net/micrel,ks8851.yaml
@@ -44,6 +44,7 @@ required:
 
 allOf:
   - $ref: ethernet-controller.yaml#
+  - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
index df9e844dd6bc..2681168777a1 100644
--- a/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
+++ b/Documentation/devicetree/bindings/net/micrel-ksz90x1.txt
@@ -158,6 +158,7 @@ KSZ9031:
         no link will be established.
 
 KSZ9131:
+LAN8841:
 
   All skew control options are specified in picoseconds. The increment
   step is 100ps. Unlike KSZ9031, the values represent picoseccond delays.
diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt
index 8d157f0295a5..a407dd1b4614 100644
--- a/Documentation/devicetree/bindings/net/micrel.txt
+++ b/Documentation/devicetree/bindings/net/micrel.txt
@@ -16,6 +16,7 @@ Optional properties:
 	KSZ8051: register 0x1f, bits 5..4
 	KSZ8081: register 0x1f, bits 5..4
 	KSZ8091: register 0x1f, bits 5..4
+	LAN8814: register EP5.0, bit 6
 
 	See the respective PHY datasheet for the mode values.
 
@@ -45,3 +46,12 @@ Optional properties:
 
 	In fiber mode, auto-negotiation is disabled and the PHY can only work in
 	100base-fx (full and half duplex) modes.
+
+ - coma-mode-gpios: If present the given gpio will be deasserted when the
+		    PHY is probed.
+
+	Some PHYs have a COMA mode input pin which puts the PHY into
+	isolate and power-down mode. On some boards this input is connected
+	to a GPIO of the SoC.
+
+	Supported on the LAN8814.
diff --git a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
new file mode 100644
index 000000000000..0b97e14d947f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,lan95xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip SMSC9500/LAN9530/LAN9730 USB Ethernet Controllers
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  Device tree properties for hard wired SMSC95xx compatible USB Ethernet
+  controller.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - usb424,9500   # SMSC9500 USB Ethernet Device
+          - usb424,9505   # SMSC9505 USB Ethernet Device
+          - usb424,9530   # SMSC LAN9530 USB Ethernet Device
+          - usb424,9730   # SMSC LAN9730 USB Ethernet Device
+          - usb424,9900   # SMSC9500 USB Ethernet Device (SAL10)
+          - usb424,9901   # SMSC9505 USB Ethernet Device (SAL10)
+          - usb424,9902   # SMSC9500A USB Ethernet Device (SAL10)
+          - usb424,9903   # SMSC9505A USB Ethernet Device (SAL10)
+          - usb424,9904   # SMSC9512/9514 USB Hub & Ethernet Device (SAL10)
+          - usb424,9905   # SMSC9500A USB Ethernet Device (HAL)
+          - usb424,9906   # SMSC9505A USB Ethernet Device (HAL)
+          - usb424,9907   # SMSC9500 USB Ethernet Device (Alternate ID)
+          - usb424,9908   # SMSC9500A USB Ethernet Device (Alternate ID)
+          - usb424,9909   # SMSC9512/9514 USB Hub & Ethernet Devic.  ID)
+          - usb424,9e00   # SMSC9500A USB Ethernet Device
+          - usb424,9e01   # SMSC9505A USB Ethernet Device
+          - usb424,9e08   # SMSC LAN89530 USB Ethernet Device
+          - usb424,ec00   # SMSC9512/9514 USB Hub & Ethernet Device
+
+  reg:
+    maxItems: 1
+
+  local-mac-address: true
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@1 {
+            compatible = "usb424,9e00";
+            reg = <1>;
+            local-mac-address = [00 00 00 00 00 00];
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
new file mode 100644
index 000000000000..306ef9ecf2b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/microchip,lan966x-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Lan966x Ethernet switch controller
+
+maintainers:
+  - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+  The lan966x switch is a multi-port Gigabit AVB/TSN Ethernet Switch with
+  two integrated 10/100/1000Base-T PHYs. In addition to the integrated PHYs,
+  it supports up to 2RGMII/RMII, up to 3BASE-X/SERDES/2.5GBASE-X and up to
+  2 Quad-SGMII/Quad-USGMII interfaces.
+
+properties:
+  $nodename:
+    pattern: "^switch@[0-9a-f]+$"
+
+  compatible:
+    const: microchip,lan966x-switch
+
+  reg:
+    items:
+      - description: cpu target
+      - description: general control block target
+
+  reg-names:
+    items:
+      - const: cpu
+      - const: gcb
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: register based extraction
+      - description: frame dma based extraction
+      - description: analyzer interrupt
+      - description: ptp interrupt
+      - description: ptp external interrupt
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: xtr
+      - const: fdma
+      - const: ana
+      - const: ptp
+      - const: ptp-ext
+
+  resets:
+    items:
+      - description: Reset controller used for switch core reset (soft reset)
+
+  reset-names:
+    items:
+      - const: switch
+
+  ethernet-ports:
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    additionalProperties: false
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        type: object
+
+        $ref: /schemas/net/ethernet-controller.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          '#address-cells':
+            const: 1
+          '#size-cells':
+            const: 0
+
+          reg:
+            description:
+              Switch port number
+
+          phys:
+            description:
+              Phandle of a Ethernet SerDes PHY
+
+          phy-mode:
+            description:
+              This specifies the interface used by the Ethernet SerDes towards
+              the PHY or SFP.
+            enum:
+              - gmii
+              - sgmii
+              - qsgmii
+              - 1000base-x
+              - 2500base-x
+
+          phy-handle:
+            description:
+              Phandle of a Ethernet PHY.
+
+          sfp:
+            description:
+              Phandle of an SFP.
+
+          managed: true
+
+        required:
+          - reg
+          - phys
+          - phy-mode
+
+        oneOf:
+          - required:
+              - phy-handle
+          - required:
+              - sfp
+              - managed
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - resets
+  - reset-names
+  - ethernet-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    switch: switch@e0000000 {
+      compatible = "microchip,lan966x-switch";
+      reg =  <0xe0000000 0x0100000>,
+             <0xe2000000 0x0800000>;
+      reg-names = "cpu", "gcb";
+      interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "xtr";
+      resets = <&switch_reset 0>;
+      reset-names = "switch";
+      ethernet-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port0: port@0 {
+          reg = <0>;
+          phy-handle = <&phy0>;
+          phys = <&serdes 0 0>;
+          phy-mode = "gmii";
+        };
+
+        port1: port@1 {
+          reg = <1>;
+          sfp = <&sfp_eth1>;
+          managed = "in-band-status";
+          phys = <&serdes 2 4>;
+          phy-mode = "sgmii";
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
index 347b912a46bb..fcafef8d5a33 100644
--- a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
+++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml
@@ -53,12 +53,14 @@ properties:
     items:
       - description: register based extraction
       - description: frame dma based extraction
+      - description: ptp interrupt
 
   interrupt-names:
     minItems: 1
     items:
       - const: xtr
       - const: fdma
+      - const: ptp
 
   resets:
     items:
@@ -72,16 +74,20 @@ properties:
 
   ethernet-ports:
     type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
     patternProperties:
       "^port@[0-9a-f]+$":
-        type: object
+        $ref: /schemas/net/ethernet-controller.yaml#
+        unevaluatedProperties: false
 
         properties:
-          '#address-cells':
-            const: 1
-          '#size-cells':
-            const: 0
-
           reg:
             description: Switch port number
 
@@ -91,35 +97,17 @@ properties:
               phandle of a Ethernet SerDes PHY.  This defines which SerDes
               instance will handle the Ethernet traffic.
 
-          phy-mode:
-            description:
-              This specifies the interface used by the Ethernet SerDes towards
-              the PHY or SFP.
-
           microchip,bandwidth:
             description: Specifies bandwidth in Mbit/s allocated to the port.
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             maximum: 25000
 
-          phy-handle:
-            description:
-              phandle of a Ethernet PHY.  This is optional and if provided it
-              points to the cuPHY used by the Ethernet SerDes.
-
-          sfp:
-            description:
-              phandle of an SFP.  This is optional and used when not specifying
-              a cuPHY.  It points to the SFP node that describes the SFP used by
-              the Ethernet SerDes.
-
-          managed: true
-
           microchip,sd-sgpio:
             description:
               Index of the ports Signal Detect SGPIO in the set of 384 SGPIOs
               This is optional, and only needed if the default used index is
               is not correct.
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 0
             maximum: 383
 
@@ -142,8 +130,6 @@ required:
   - reg-names
   - interrupts
   - interrupt-names
-  - resets
-  - reset-names
   - ethernet-ports
 
 additionalProperties: false
diff --git a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
new file mode 100644
index 000000000000..157e3bbcaf6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/motorcomm,yt8xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MotorComm yt8xxx Ethernet PHY
+
+maintainers:
+  - Frank Sae <frank.sae@motor-comm.com>
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ethernet-phy-id4f51.e91a
+      - ethernet-phy-id4f51.e91b
+
+  rx-internal-delay-ps:
+    description: |
+      RGMII RX Clock Delay used only when PHY operates in RGMII mode with
+      internal delay (phy-mode is 'rgmii-id' or 'rgmii-rxid') in pico-seconds.
+    enum: [ 0, 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500, 1650,
+            1800, 1900, 1950, 2050, 2100, 2200, 2250, 2350, 2500, 2650, 2800,
+            2950, 3100, 3250, 3400, 3550, 3700, 3850, 4000, 4150 ]
+    default: 1950
+
+  tx-internal-delay-ps:
+    description: |
+      RGMII TX Clock Delay used only when PHY operates in RGMII mode with
+      internal delay (phy-mode is 'rgmii-id' or 'rgmii-txid') in pico-seconds.
+    enum: [ 0, 150, 300, 450, 600, 750, 900, 1050, 1200, 1350, 1500, 1650, 1800,
+            1950, 2100, 2250 ]
+    default: 1950
+
+  motorcomm,clk-out-frequency-hz:
+    description: clock output on clock output pin.
+    enum: [0, 25000000, 125000000]
+    default: 0
+
+  motorcomm,keep-pll-enabled:
+    description: |
+      If set, keep the PLL enabled even if there is no link. Useful if you
+      want to use the clock output without an ethernet link.
+    type: boolean
+
+  motorcomm,auto-sleep-disabled:
+    description: |
+      If set, PHY will not enter sleep mode and close AFE after unplug cable
+      for a timer.
+    type: boolean
+
+  motorcomm,tx-clk-adj-enabled:
+    description: |
+      This configuration is mainly to adapt to VF2 with JH7110 SoC.
+      Useful if you want to use tx-clk-xxxx-inverted to adj the delay of tx clk.
+    type: boolean
+
+  motorcomm,tx-clk-10-inverted:
+    description: |
+      Use original or inverted RGMII Transmit PHY Clock to drive the RGMII
+      Transmit PHY Clock delay train configuration when speed is 10Mbps.
+    type: boolean
+
+  motorcomm,tx-clk-100-inverted:
+    description: |
+      Use original or inverted RGMII Transmit PHY Clock to drive the RGMII
+      Transmit PHY Clock delay train configuration when speed is 100Mbps.
+    type: boolean
+
+  motorcomm,tx-clk-1000-inverted:
+    description: |
+      Use original or inverted RGMII Transmit PHY Clock to drive the RGMII
+      Transmit PHY Clock delay train configuration when speed is 1000Mbps.
+    type: boolean
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phy-mode = "rgmii-id";
+        ethernet-phy@4 {
+            /*  Only needed to make DT lint tools work. Do not copy/paste
+             *  into real DTS files.
+             */
+            compatible = "ethernet-phy-id4f51.e91a";
+
+            reg = <4>;
+            rx-internal-delay-ps = <2100>;
+            tx-internal-delay-ps = <150>;
+            motorcomm,clk-out-frequency-hz = <0>;
+            motorcomm,keep-pll-enabled;
+            motorcomm,auto-sleep-disabled;
+        };
+    };
+  - |
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phy-mode = "rgmii";
+        ethernet-phy@5 {
+            /*  Only needed to make DT lint tools work. Do not copy/paste
+             *  into real DTS files.
+             */
+            compatible = "ethernet-phy-id4f51.e91a";
+
+            reg = <5>;
+            motorcomm,clk-out-frequency-hz = <125000000>;
+            motorcomm,keep-pll-enabled;
+            motorcomm,auto-sleep-disabled;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/mscc,miim.yaml b/Documentation/devicetree/bindings/net/mscc,miim.yaml
new file mode 100644
index 000000000000..5b292e7c9e46
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mscc,miim.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mscc,miim.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi MII Management Controller (MIIM)
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+allOf:
+  - $ref: mdio.yaml#
+
+properties:
+  compatible:
+    enum:
+      - mscc,ocelot-miim
+      - microchip,lan966x-miim
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  reg:
+    items:
+      - description: base address
+      - description: associated reset register for internal PHYs
+    minItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency: true
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mdio@107009c {
+      compatible = "mscc,ocelot-miim";
+      reg = <0x107009c 0x36>, <0x10700f0 0x8>;
+      interrupts = <14>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      phy0: ethernet-phy@0 {
+        reg = <0>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
new file mode 100644
index 000000000000..8ee2c7d7ff42
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
@@ -0,0 +1,233 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/mscc,vsc7514-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip VSC7514 Ethernet switch controller
+
+maintainers:
+  - Vladimir Oltean <vladimir.oltean@nxp.com>
+  - Claudiu Manoil <claudiu.manoil@nxp.com>
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description: |
+  Bindings for the Microchip VSC7514 switch driver
+
+  The VSC7514 switch driver handles up to 11 ports and can inject/extract
+  packets using CPU. Additionally, PTP is supported as well as FDMA for faster
+  packet extraction/injection.
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: mscc,vsc7514-switch
+    then:
+      $ref: ethernet-switch.yaml#
+      required:
+        - interrupts
+        - interrupt-names
+      properties:
+        reg:
+          minItems: 21
+        reg-names:
+          minItems: 21
+        ethernet-ports:
+          patternProperties:
+            "^port@[0-9a-f]+$":
+              $ref: ethernet-switch-port.yaml#
+              unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          const: mscc,vsc7512-switch
+    then:
+      $ref: /schemas/net/dsa/dsa.yaml#
+      properties:
+        reg:
+          maxItems: 20
+        reg-names:
+          maxItems: 20
+        ethernet-ports:
+          patternProperties:
+            "^port@[0-9a-f]+$":
+              $ref: /schemas/net/dsa/dsa-port.yaml#
+              unevaluatedProperties: false
+
+properties:
+  compatible:
+    enum:
+      - mscc,vsc7512-switch
+      - mscc,vsc7514-switch
+
+  reg:
+    minItems: 20
+    items:
+      - description: system target
+      - description: rewriter target
+      - description: qs target
+      - description: PTP target
+      - description: Port0 target
+      - description: Port1 target
+      - description: Port2 target
+      - description: Port3 target
+      - description: Port4 target
+      - description: Port5 target
+      - description: Port6 target
+      - description: Port7 target
+      - description: Port8 target
+      - description: Port9 target
+      - description: Port10 target
+      - description: QSystem target
+      - description: Analyzer target
+      - description: S0 target
+      - description: S1 target
+      - description: S2 target
+      - description: fdma target
+
+  reg-names:
+    minItems: 20
+    items:
+      - const: sys
+      - const: rew
+      - const: qs
+      - const: ptp
+      - const: port0
+      - const: port1
+      - const: port2
+      - const: port3
+      - const: port4
+      - const: port5
+      - const: port6
+      - const: port7
+      - const: port8
+      - const: port9
+      - const: port10
+      - const: qsys
+      - const: ana
+      - const: s0
+      - const: s1
+      - const: s2
+      - const: fdma
+
+  interrupts:
+    minItems: 1
+    items:
+      - description: PTP ready
+      - description: register based extraction
+      - description: frame dma based extraction
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: ptp_rdy
+      - const: xtr
+      - const: fdma
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ethernet-ports
+
+unevaluatedProperties: false
+
+examples:
+  # VSC7514 (Switchdev)
+  - |
+    switch@1010000 {
+      compatible = "mscc,vsc7514-switch";
+      reg = <0x1010000 0x10000>,
+            <0x1030000 0x10000>,
+            <0x1080000 0x100>,
+            <0x10e0000 0x10000>,
+            <0x11e0000 0x100>,
+            <0x11f0000 0x100>,
+            <0x1200000 0x100>,
+            <0x1210000 0x100>,
+            <0x1220000 0x100>,
+            <0x1230000 0x100>,
+            <0x1240000 0x100>,
+            <0x1250000 0x100>,
+            <0x1260000 0x100>,
+            <0x1270000 0x100>,
+            <0x1280000 0x100>,
+            <0x1800000 0x80000>,
+            <0x1880000 0x10000>,
+            <0x1040000 0x10000>,
+            <0x1050000 0x10000>,
+            <0x1060000 0x10000>,
+            <0x1a0 0x1c4>;
+      reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
+            "port2", "port3", "port4", "port5", "port6",
+            "port7", "port8", "port9", "port10", "qsys",
+            "ana", "s0", "s1", "s2", "fdma";
+      interrupts = <18 21 16>;
+      interrupt-names = "ptp_rdy", "xtr", "fdma";
+
+      ethernet-ports {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        port0: port@0 {
+          reg = <0>;
+          phy-handle = <&phy0>;
+          phy-mode = "internal";
+        };
+        port1: port@1 {
+          reg = <1>;
+          phy-handle = <&phy1>;
+          phy-mode = "internal";
+        };
+      };
+    };
+  # VSC7512 (DSA)
+  - |
+    ethernet-switch@1{
+      compatible = "mscc,vsc7512-switch";
+      reg = <0x71010000 0x10000>,
+            <0x71030000 0x10000>,
+            <0x71080000 0x100>,
+            <0x710e0000 0x10000>,
+            <0x711e0000 0x100>,
+            <0x711f0000 0x100>,
+            <0x71200000 0x100>,
+            <0x71210000 0x100>,
+            <0x71220000 0x100>,
+            <0x71230000 0x100>,
+            <0x71240000 0x100>,
+            <0x71250000 0x100>,
+            <0x71260000 0x100>,
+            <0x71270000 0x100>,
+            <0x71280000 0x100>,
+            <0x71800000 0x80000>,
+            <0x71880000 0x10000>,
+            <0x71040000 0x10000>,
+            <0x71050000 0x10000>,
+            <0x71060000 0x10000>;
+            reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
+            "port2", "port3", "port4", "port5", "port6",
+            "port7", "port8", "port9", "port10", "qsys",
+            "ana", "s0", "s1", "s2";
+
+            ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+           port@0 {
+            reg = <0>;
+            ethernet = <&mac_sw>;
+            phy-handle = <&phy0>;
+            phy-mode = "internal";
+          };
+          port@1 {
+            reg = <1>;
+            phy-handle = <&phy1>;
+            phy-mode = "internal";
+          };
+        };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/net/mscc-miim.txt b/Documentation/devicetree/bindings/net/mscc-miim.txt
deleted file mode 100644
index 7104679cf59d..000000000000
--- a/Documentation/devicetree/bindings/net/mscc-miim.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Microsemi MII Management Controller (MIIM) / MDIO
-=================================================
-
-Properties:
-- compatible: must be "mscc,ocelot-miim"
-- reg: The base address of the MDIO bus controller register bank. Optionally, a
-  second register bank can be defined if there is an associated reset register
-  for internal PHYs
-- #address-cells: Must be <1>.
-- #size-cells: Must be <0>.  MDIO addresses have no size component.
-- interrupts: interrupt specifier (refer to the interrupt binding)
-
-Typically an MDIO bus might have several children.
-
-Example:
-	mdio@107009c {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "mscc,ocelot-miim";
-		reg = <0x107009c 0x36>, <0x10700f0 0x8>;
-		interrupts = <14>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
deleted file mode 100644
index 3b6290b45ce5..000000000000
--- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-Microsemi Ocelot network Switch
-===============================
-
-The Microsemi Ocelot network switch can be found on Microsemi SoCs (VSC7513,
-VSC7514)
-
-Required properties:
-- compatible: Should be "mscc,vsc7514-switch"
-- reg: Must contain an (offset, length) pair of the register set for each
-  entry in reg-names.
-- reg-names: Must include the following entries:
-  - "sys"
-  - "rew"
-  - "qs"
-  - "ptp" (optional due to backward compatibility)
-  - "qsys"
-  - "ana"
-  - "portX" with X from 0 to the number of last port index available on that
-    switch
-- interrupts: Should contain the switch interrupts for frame extraction,
-  frame injection and PTP ready.
-- interrupt-names: should contain the interrupt names: "xtr", "inj". Can contain
-  "ptp_rdy" which is optional due to backward compatibility.
-- ethernet-ports: A container for child nodes representing switch ports.
-
-The ethernet-ports container has the following properties
-
-Required properties:
-
-- #address-cells: Must be 1
-- #size-cells: Must be 0
-
-Each port node must have the following mandatory properties:
-- reg: Describes the port address in the switch
-
-Port nodes may also contain the following optional standardised
-properties, described in binding documents:
-
-- phy-handle: Phandle to a PHY on an MDIO bus. See
-  Documentation/devicetree/bindings/net/ethernet.txt for details.
-
-Example:
-
-	switch@1010000 {
-		compatible = "mscc,vsc7514-switch";
-		reg = <0x1010000 0x10000>,
-		      <0x1030000 0x10000>,
-		      <0x1080000 0x100>,
-		      <0x10e0000 0x10000>,
-		      <0x11e0000 0x100>,
-		      <0x11f0000 0x100>,
-		      <0x1200000 0x100>,
-		      <0x1210000 0x100>,
-		      <0x1220000 0x100>,
-		      <0x1230000 0x100>,
-		      <0x1240000 0x100>,
-		      <0x1250000 0x100>,
-		      <0x1260000 0x100>,
-		      <0x1270000 0x100>,
-		      <0x1280000 0x100>,
-		      <0x1800000 0x80000>,
-		      <0x1880000 0x10000>;
-		reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
-			    "port2", "port3", "port4", "port5", "port6",
-			    "port7", "port8", "port9", "port10", "qsys",
-			    "ana";
-		interrupts = <18 21 22>;
-		interrupt-names = "ptp_rdy", "xtr", "inj";
-
-		ethernet-ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port0: port@0 {
-				reg = <0>;
-				phy-handle = <&phy0>;
-			};
-			port1: port@1 {
-				reg = <1>;
-				phy-handle = <&phy1>;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
new file mode 100644
index 000000000000..8e9a95f24c80
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/marvell,nci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell International Ltd. NCI NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - marvell,nfc-i2c
+      - marvell,nfc-spi
+      - marvell,nfc-uart
+
+  hci-muxed:
+    type: boolean
+    description: |
+      Specifies that the chip is muxing NCI over HCI frames
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  reset-n-io:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+    description: |
+      Output GPIO pin used to reset the chip (active low)
+
+  i2c-int-falling:
+    type: boolean
+    description: |
+      For I2C type of connection. Specifies that the chip read event shall be
+      trigged on falling edge.
+
+  i2c-int-rising:
+    type: boolean
+    description: |
+      For I2C type of connection.  Specifies that the chip read event shall be
+      trigged on rising edge.
+
+  break-control:
+    type: boolean
+    description: |
+      For UART type of connection. Specifies that the chip needs specific break
+      management.
+
+  flow-control:
+    type: boolean
+    description: |
+      For UART type of connection. Specifies that the chip is using RTS/CTS.
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,nfc-i2c
+    then:
+      properties:
+        break-control: false
+        flow-control: false
+        spi-cpha: false
+        spi-cpol: false
+        spi-max-frequency: false
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,nfc-spi
+    then:
+      $ref: /schemas/spi/spi-peripheral-props.yaml#
+      properties:
+        break-control: false
+        flow-control: false
+        i2c-int-falling: false
+        i2c-int-rising: false
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,nfc-uart
+    then:
+      properties:
+        i2c-int-falling: false
+        i2c-int-rising: false
+        interrupts: false
+        spi-cpha: false
+        spi-cpol: false
+        spi-max-frequency: false
+        reg: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@8 {
+            compatible = "marvell,nfc-i2c";
+            reg = <0x8>;
+
+            interrupt-parent = <&gpio3>;
+            interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+            i2c-int-rising;
+
+            reset-n-io = <&gpio3 19 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@0 {
+            compatible = "marvell,nfc-spi";
+            reg = <0>;
+
+            spi-max-frequency = <3000000>;
+            spi-cpha;
+            spi-cpol;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+
+            reset-n-io = <&gpio3 19 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    uart {
+        nfc {
+            compatible = "marvell,nfc-uart";
+
+            reset-n-io = <&gpio3 16 GPIO_ACTIVE_LOW>;
+
+            hci-muxed;
+            flow-control;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt b/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt
deleted file mode 100644
index c9b35251bb20..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/nfcmrvl.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-* Marvell International Ltd. NCI NFC Controller
-
-Required properties:
-- compatible: Should be:
-  - "marvell,nfc-uart" or "mrvl,nfc-uart" for UART devices
-  - "marvell,nfc-i2c" for I2C devices
-  - "marvell,nfc-spi" for SPI devices
-
-Optional SoC specific properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- reset-n-io: Output GPIO pin used to reset the chip (active low).
-- hci-muxed: Specifies that the chip is muxing NCI over HCI frames.
-
-Optional UART-based chip specific properties:
-- flow-control: Specifies that the chip is using RTS/CTS.
-- break-control: Specifies that the chip needs specific break management.
-
-Optional I2C-based chip specific properties:
-- i2c-int-falling: Specifies that the chip read event shall be trigged on
-  		   falling edge.
-- i2c-int-rising: Specifies that the chip read event shall be trigged on
-  		  rising edge.
-
-Example (for ARM-based BeagleBoard Black with 88W8887 on UART5):
-
-&uart5 {
-
-	nfcmrvluart: nfcmrvluart@5 {
-		compatible = "marvell,nfc-uart";
-
-		reset-n-io = <&gpio3 16 0>;
-
-		hci-muxed;
-		flow-control;
-        }
-};
-
-
-Example (for ARM-based BeagleBoard Black with 88W8887 on I2C1):
-
-&i2c1 {
-	clock-frequency = <400000>;
-
-	nfcmrvli2c0: i2c@1 {
-		compatible = "marvell,nfc-i2c";
-
-		reg = <0x8>;
-
-		/* I2C INT configuration */
-		interrupt-parent = <&gpio3>;
-		interrupts = <21 0>;
-
-		/* I2C INT trigger configuration */
-		i2c-int-rising;
-
-		/* Reset IO */
-		reset-n-io = <&gpio3 19 0>;
-	};
-};
-
-
-Example (for ARM-based BeagleBoard Black on SPI0):
-
-&spi0 {
-
-	mrvlnfcspi0: spi@0 {
-		compatible = "marvell,nfc-spi";
-
-		reg = <0>;
-
-		/* SPI Bus configuration */
-		spi-max-frequency = <3000000>;
-		spi-cpha;
-		spi-cpol;
-
-		/* SPI INT configuration */
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 0>;
-
-		/* Reset IO */
-       		reset-n-io = <&gpio3 19 0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
new file mode 100644
index 000000000000..6924aff0b2c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/nxp,nci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Semiconductors NCI NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nxp,nxp-nci-i2c
+      - items:
+          - enum:
+              - nxp,nq310
+              - nxp,pn547
+          - const: nxp,nxp-nci-i2c
+
+  enable-gpios:
+    description: Output GPIO pin used for enabling/disabling the controller
+
+  firmware-gpios:
+    description: Output GPIO pin used to enter firmware download mode
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - enable-gpios
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@29 {
+            compatible = "nxp,nxp-nci-i2c";
+
+            reg = <0x29>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+
+            enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
+            firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml
new file mode 100644
index 000000000000..07c67c1e985f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/nxp,pn532.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Semiconductors PN532 NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    oneOf:
+      - const: nxp,pn532
+      - description: Deprecated bindings
+        enum:
+          - nxp,pn532-i2c
+          - nxp,pn533-i2c
+        deprecated: true
+
+  interrupts:
+    description: Required if connected via I2C
+    maxItems: 1
+
+  reg:
+    description: Required if connected via I2C
+    maxItems: 1
+
+required:
+  - compatible
+
+dependencies:
+  interrupts: [ reg ]
+
+additionalProperties: false
+
+examples:
+  # PN532 on I2C bus
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@24 {
+            compatible = "nxp,pn532";
+
+            reg = <0x24>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+
+  # PN532 connected via UART
+  - |
+    serial@49042000 {
+        reg = <0x49042000 0x400>;
+
+        nfc {
+            compatible = "nxp,pn532";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
new file mode 100644
index 000000000000..18b3a7d819df
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/nxp,pn544.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Semiconductors PN544 NFC Controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: nxp,pn544-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  enable-gpios:
+    description: Output GPIO pin used for enabling/disabling the PN544
+    maxItems: 1
+
+  firmware-gpios:
+    description: Output GPIO pin used to enter firmware download mode
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - enable-gpios
+  - firmware-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@28 {
+            compatible = "nxp,pn544-i2c";
+            reg = <0x28>;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+
+            enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+            firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
deleted file mode 100644
index 285a37c2f189..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* NXP Semiconductors NXP NCI NFC Controllers
-
-Required properties:
-- compatible: Should be "nxp,nxp-nci-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- enable-gpios: Output GPIO pin used for enabling/disabling the chip
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- firmware-gpios: Output GPIO pin used to enter firmware download mode
-
-Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2):
-
-&i2c2 {
-
-
-	npc100: npc100@29 {
-
-		compatible = "nxp,nxp-nci-i2c";
-
-		reg = <0x29>;
-		clock-frequency = <100000>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
-
-		enable-gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-		firmware-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/pn532.txt b/Documentation/devicetree/bindings/net/nfc/pn532.txt
deleted file mode 100644
index a5507dc499bc..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/pn532.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* NXP Semiconductors PN532 NFC Controller
-
-Required properties:
-- compatible: Should be
-    - "nxp,pn532" Place a node with this inside the devicetree node of the bus
-                  where the NFC chip is connected to.
-                  Currently the kernel has phy bindings for uart and i2c.
-    - "nxp,pn532-i2c" (DEPRECATED) only works for the i2c binding.
-    - "nxp,pn533-i2c" (DEPRECATED) only works for the i2c binding.
-
-Required properties if connected on i2c:
-- clock-frequency: I²C work frequency.
-- reg: for the I²C bus address. This is fixed at 0x24 for the PN532.
-- interrupts: GPIO interrupt to which the chip is connected
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBone with PN532 on I2C2):
-
-&i2c2 {
-
-
-	pn532: nfc@24 {
-
-		compatible = "nxp,pn532";
-
-		reg = <0x24>;
-		clock-frequency = <400000>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
-
-	};
-};
-
-Example (for PN532 connected via uart):
-
-uart4: serial@49042000 {
-        compatible = "ti,omap3-uart";
-
-        pn532: nfc {
-                compatible = "nxp,pn532";
-        };
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/pn544.txt b/Documentation/devicetree/bindings/net/nfc/pn544.txt
deleted file mode 100644
index 2bd82562ce8e..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/pn544.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-* NXP Semiconductors PN544 NFC Controller
-
-Required properties:
-- compatible: Should be "nxp,pn544-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- enable-gpios: Output GPIO pin used for enabling/disabling the PN544
-- firmware-gpios: Output GPIO pin used to enter firmware download mode
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-
-Example (for ARM-based BeagleBone with PN544 on I2C2):
-
-&i2c2 {
-
-
-	pn544: pn544@28 {
-
-		compatible = "nxp,pn544-i2c";
-
-		reg = <0x28>;
-		clock-frequency = <400000>;
-
-		interrupt-parent = <&gpio1>;
-		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
-
-		enable-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
-		firmware-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
index 64995cbb0f97..12baee45752c 100644
--- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -8,7 +8,6 @@ title: Samsung S3FWRN5 NCI NFC Controller
 
 maintainers:
   - Krzysztof Kozlowski <krzk@kernel.org>
-  - Krzysztof Opasiak <k.opasiak@samsung.com>
 
 properties:
   compatible:
@@ -70,7 +69,7 @@ examples:
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/irq.h>
 
-    i2c4 {
+    i2c {
         #address-cells = <1>;
         #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml
new file mode 100644
index 000000000000..1dcbddbc5a74
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/st,st-nci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics ST NCI NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - st,st21nfcb-i2c
+      - st,st21nfcb-spi
+      - st,st21nfcc-i2c
+
+  reset-gpios:
+    description: Output GPIO pin used for resetting the controller
+
+  ese-present:
+    type: boolean
+    description: |
+      Specifies that an ese is physically connected to the controller
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  uicc-present:
+    type: boolean
+    description: |
+      Specifies that the uicc swp signal can be physically connected to the
+      controller
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - reset-gpios
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,st21nfcb-i2c
+          - st,st21nfcc-i2c
+then:
+  properties:
+    spi-max-frequency: false
+else:
+  $ref: /schemas/spi/spi-peripheral-props.yaml#
+  required:
+    - spi-max-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@8 {
+            compatible = "st,st21nfcb-i2c";
+            reg = <0x08>;
+
+            interrupt-parent = <&gpio5>;
+            interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+            reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+            ese-present;
+            uicc-present;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@0 {
+            compatible = "st,st21nfcb-spi";
+            reg = <0>;
+
+            spi-max-frequency = <4000000>;
+
+            interrupt-parent = <&gpio5>;
+            interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+            reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+            ese-present;
+            uicc-present;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml b/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml
new file mode 100644
index 000000000000..8a7274357b46
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/st,st21nfca.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics SAS ST21NFCA NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: st,st21nfca-i2c
+
+  enable-gpios:
+    description: Output GPIO pin used for enabling/disabling the controller
+
+  ese-present:
+    type: boolean
+    description: |
+      Specifies that an ese is physically connected to the controller
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  uicc-present:
+    type: boolean
+    description: |
+      Specifies that the uicc swp signal can be physically connected to the
+      controller
+
+required:
+  - compatible
+  - enable-gpios
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@1 {
+            compatible = "st,st21nfca-i2c";
+            reg = <0x1>;
+
+            interrupt-parent = <&gpio5>;
+            interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+            enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+            ese-present;
+            uicc-present;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml
new file mode 100644
index 000000000000..647569051ed8
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/st,st95hf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics ST95HF NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    const: st,st95hf
+
+  enable-gpio:
+    description: Output GPIO pin used for enabling/disabling the controller
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  st95hfvin-supply:
+    description: ST95HF transceiver's Vin regulator supply
+
+required:
+  - compatible
+  - enable-gpio
+  - interrupts
+  - reg
+  - spi-max-frequency
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@0{
+            compatible = "st,st95hf";
+            reg = <0>;
+
+            spi-max-frequency = <1000000>;
+            enable-gpio = <&pio4 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&pio0>;
+            interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
deleted file mode 100644
index baa8f8133d19..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/st-nci-i2c.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-* STMicroelectronics SAS. ST NCI NFC Controller
-
-Required properties:
-- compatible: Should be "st,st21nfcb-i2c" or "st,st21nfcc-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-- interrupts: GPIO interrupt to which the chip is connected
-- reset-gpios: Output GPIO pin used to reset the ST21NFCB
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- ese-present: Specifies that an ese is physically connected to the nfc
-controller.
-- uicc-present: Specifies that the uicc swp signal can be physically
-connected to the nfc controller.
-
-Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2):
-
-&i2c2 {
-
-
-	st21nfcb: st21nfcb@8 {
-
-		compatible = "st,st21nfcb-i2c";
-
-		reg = <0x08>;
-		clock-frequency = <400000>;
-
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-
-		reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-
-		ese-present;
-		uicc-present;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt b/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
deleted file mode 100644
index d33343330b94..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/st-nci-spi.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* STMicroelectronics SAS. ST NCI NFC Controller
-
-Required properties:
-- compatible: Should be "st,st21nfcb-spi"
-- spi-max-frequency: Maximum SPI frequency (<= 4000000).
-- interrupts: GPIO interrupt to which the chip is connected
-- reset-gpios: Output GPIO pin used to reset the ST21NFCB
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- ese-present: Specifies that an ese is physically connected to the nfc
-controller.
-- uicc-present: Specifies that the uicc swp signal can be physically
-connected to the nfc controller.
-
-Example (for ARM-based BeagleBoard xM with ST21NFCB on SPI4):
-
-&mcspi4 {
-
-
-	st21nfcb: st21nfcb@0 {
-
-		compatible = "st,st21nfcb-spi";
-
-		clock-frequency = <4000000>;
-
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
-
-		reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-
-		ese-present;
-		uicc-present;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
deleted file mode 100644
index b8bd90f80e12..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* STMicroelectronics SAS. ST21NFCA NFC Controller
-
-Required properties:
-- compatible: Should be "st,st21nfca-i2c".
-- clock-frequency: I²C work frequency.
-- reg: address on the bus
-- enable-gpios: Output GPIO pin used for enabling/disabling the ST21NFCA
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- ese-present: Specifies that an ese is physically connected to the nfc
-controller.
-- uicc-present: Specifies that the uicc swp signal can be physically
-connected to the nfc controller.
-
-Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
-
-&i2c2 {
-
-
-	st21nfca: st21nfca@1 {
-
-		compatible = "st,st21nfca-i2c";
-
-		reg = <0x01>;
-		clock-frequency = <400000>;
-
-		interrupt-parent = <&gpio5>;
-		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
-		enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-
-		ese-present;
-		uicc-present;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/st95hf.txt b/Documentation/devicetree/bindings/net/nfc/st95hf.txt
deleted file mode 100644
index 3f373a1e20ff..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/st95hf.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-* STMicroelectronics : NFC Transceiver ST95HF
-
-ST NFC Transceiver is required to attach with SPI bus.
-ST95HF node should be defined in DT as SPI slave device of SPI
-master with which ST95HF transceiver is physically connected.
-The properties defined below are required to be the part of DT
-to include ST95HF transceiver into the platform.
-
-Required properties:
-===================
-- reg: Address of SPI slave "ST95HF transceiver" on SPI master bus.
-
-- compatible: should be "st,st95hf" for ST95HF NFC transceiver
-
-- spi-max-frequency: Max. operating SPI frequency for ST95HF
-	transceiver.
-
-- enable-gpio: GPIO line to enable ST95HF transceiver.
-
-- interrupts : Standard way to define ST95HF transceiver's out
-	interrupt.
-
-Optional property:
-=================
-- st95hfvin-supply : This is an optional property. It contains a
-	phandle to ST95HF transceiver's regulator supply node in DT.
-
-Example:
-=======
-spi@9840000 {
-	reg = <0x9840000 0x110>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-	cs-gpios = <&pio0 4>;
-
-	st95hf@0{
-		reg = <0>;
-		compatible = "st,st95hf";
-		spi-max-frequency = <1000000>;
-		enable-gpio = <&pio4 0>;
-		interrupt-parent = <&pio0>;
-		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
-	};
-
-};
diff --git a/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
new file mode 100644
index 000000000000..9cc236ec42f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/ti,trf7970a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TRF7970A RFID/NFC/15693 Transceiver
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+  - Mark Greer <mgreer@animalcreek.com>
+
+properties:
+  compatible:
+    const: ti,trf7970a
+
+  autosuspend-delay:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Specify autosuspend delay in milliseconds.
+
+  clock-frequency:
+    description: |
+      Set to specify that the input frequency to the trf7970a is 13560000Hz or
+      27120000Hz
+
+  en2-rf-quirk:
+    type: boolean
+    description: |
+      Specify that the trf7970a being used has the "EN2 RF" erratum
+
+  interrupts:
+    maxItems: 1
+
+  irq-status-read-quirk:
+    type: boolean
+    description: |
+      Specify that the trf7970a being used has the "IRQ Status Read" erratum
+
+  reg:
+    maxItems: 1
+
+  ti,enable-gpios:
+    minItems: 1
+    maxItems: 2
+    description: |
+      One or two GPIO entries used for 'EN' and 'EN2' pins on the TRF7970A. EN2
+      is optional.
+
+  vdd-io-supply:
+    description: |
+      Regulator specifying voltage for VDD-IO
+
+  vin-supply:
+    description: |
+      Regulator for supply voltage to VIN pin
+
+required:
+  - compatible
+  - interrupts
+  - reg
+  - spi-max-frequency
+  - ti,enable-gpios
+  - vin-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@0 {
+            compatible = "ti,trf7970a";
+            reg = <0>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&trf7970a_default>;
+            spi-max-frequency = <2000000>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <14 0>;
+
+            ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>,
+                              <&gpio2 5 GPIO_ACTIVE_HIGH>;
+            vin-supply = <&ldo3_reg>;
+            vdd-io-supply = <&ldo2_reg>;
+            autosuspend-delay = <30000>;
+            irq-status-read-quirk;
+            en2-rf-quirk;
+            clock-frequency = <27120000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
deleted file mode 100644
index ba1934b950e5..000000000000
--- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* Texas Instruments TRF7970A RFID/NFC/15693 Transceiver
-
-Required properties:
-- compatible: Should be "ti,trf7970a".
-- spi-max-frequency: Maximum SPI frequency (<= 2000000).
-- interrupts: A single interrupt specifier.
-- ti,enable-gpios: One or two GPIO entries used for 'EN' and 'EN2' pins on the
-  TRF7970A. EN2 is optional.
-- vin-supply: Regulator for supply voltage to VIN pin
-
-Optional SoC Specific Properties:
-- pinctrl-names: Contains only one value - "default".
-- pintctrl-0: Specifies the pin control groups used for this controller.
-- autosuspend-delay: Specify autosuspend delay in milliseconds.
-- irq-status-read-quirk: Specify that the trf7970a being used has the
-  "IRQ Status Read" erratum.
-- en2-rf-quirk: Specify that the trf7970a being used has the "EN2 RF"
-  erratum.
-- vdd-io-supply: Regulator specifying voltage for vdd-io
-- clock-frequency: Set to specify that the input frequency to the trf7970a is 13560000Hz or 27120000Hz
-
-Example (for ARM-based BeagleBone with TRF7970A on SPI1):
-
-&spi1 {
-
-	nfc@0 {
-		compatible = "ti,trf7970a";
-		reg = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&trf7970a_default>;
-		spi-max-frequency = <2000000>;
-		interrupt-parent = <&gpio2>;
-		interrupts = <14 0>;
-		ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>,
-				  <&gpio2 5 GPIO_ACTIVE_HIGH>;
-		vin-supply = <&ldo3_reg>;
-		vdd-io-supply = <&ldo2_reg>;
-		autosuspend-delay = <30000>;
-		irq-status-read-quirk;
-		en2-rf-quirk;
-		clock-frequency = <27120000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml b/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
new file mode 100644
index 000000000000..2bd3efff2485
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nvidia,tegra234-mgbe.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nvidia,tegra234-mgbe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra234 MGBE Multi-Gigabit Ethernet Controller
+
+maintainers:
+  - Thierry Reding <treding@nvidia.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+  compatible:
+    const: nvidia,tegra234-mgbe
+
+  reg:
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: hypervisor
+      - const: mac
+      - const: xpcs
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: common
+      - const: macsec-ns
+      - const: macsec
+
+  clocks:
+    maxItems: 12
+
+  clock-names:
+    items:
+      - const: mgbe
+      - const: mac
+      - const: mac-divider
+      - const: ptp-ref
+      - const: rx-input-m
+      - const: rx-input
+      - const: tx
+      - const: eee-pcs
+      - const: rx-pcs-input
+      - const: rx-pcs-m
+      - const: rx-pcs
+      - const: tx-pcs
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: mac
+      - const: pcs
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem
+      - const: write
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  phy-handle: true
+
+  phy-mode:
+    contains:
+      enum:
+        - usxgmii
+        - 10gbase-kr
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+    description:
+      Optional node for embedded MDIO controller.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - phy-handle
+  - phy-mode
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/memory/tegra234-mc.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    ethernet@6800000 {
+        compatible = "nvidia,tegra234-mgbe";
+        reg = <0x06800000 0x10000>,
+              <0x06810000 0x10000>,
+              <0x068a0000 0x10000>;
+        reg-names = "hypervisor", "mac", "xpcs";
+        interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "common";
+        clocks = <&bpmp TEGRA234_CLK_MGBE0_APP>,
+                 <&bpmp TEGRA234_CLK_MGBE0_MAC>,
+                 <&bpmp TEGRA234_CLK_MGBE0_MAC_DIVIDER>,
+                 <&bpmp TEGRA234_CLK_MGBE0_PTP_REF>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT_M>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_INPUT>,
+                 <&bpmp TEGRA234_CLK_MGBE0_TX>,
+                 <&bpmp TEGRA234_CLK_MGBE0_EEE_PCS>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_INPUT>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS_M>,
+                 <&bpmp TEGRA234_CLK_MGBE0_RX_PCS>,
+                 <&bpmp TEGRA234_CLK_MGBE0_TX_PCS>;
+        clock-names = "mgbe", "mac", "mac-divider", "ptp-ref", "rx-input-m",
+                      "rx-input", "tx", "eee-pcs", "rx-pcs-input", "rx-pcs-m",
+                      "rx-pcs", "tx-pcs";
+        resets = <&bpmp TEGRA234_RESET_MGBE0_MAC>,
+                 <&bpmp TEGRA234_RESET_MGBE0_PCS>;
+        reset-names = "mac", "pcs";
+        interconnects = <&mc TEGRA234_MEMORY_CLIENT_MGBEARD &emc>,
+                        <&mc TEGRA234_MEMORY_CLIENT_MGBEAWR &emc>;
+        interconnect-names = "dma-mem", "write";
+        iommus = <&smmu_niso0 TEGRA234_SID_MGBE>;
+        power-domains = <&bpmp TEGRA234_POWER_DOMAIN_MGBEA>;
+
+        phy-handle = <&mgbe0_phy>;
+        phy-mode = "usxgmii";
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            mgbe0_phy: phy@0 {
+                compatible = "ethernet-phy-ieee802.3-c45";
+                reg = <0x0>;
+
+                #phy-cells = <0>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
index ee4afe361fac..63409cbff5ad 100644
--- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
@@ -4,10 +4,12 @@
 $id: http://devicetree.org/schemas/net/nxp,dwmac-imx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NXP i.MX8 DWMAC glue layer Device Tree Bindings
+title: NXP i.MX8/9 DWMAC glue layer
 
 maintainers:
-  - Joakim Zhang <qiangqing.zhang@nxp.com>
+  - Clark Wang <xiaoning.wang@nxp.com>
+  - Shawn Guo <shawnguo@kernel.org>
+  - NXP Linux Team <linux-imx@nxp.com>
 
 # We need a select here so we don't match all nodes with 'snps,dwmac'
 select:
@@ -17,6 +19,7 @@ select:
         enum:
           - nxp,imx8mp-dwmac-eqos
           - nxp,imx8dxl-dwmac-eqos
+          - nxp,imx93-dwmac-eqos
   required:
     - compatible
 
@@ -30,6 +33,7 @@ properties:
           - enum:
               - nxp,imx8mp-dwmac-eqos
               - nxp,imx8dxl-dwmac-eqos
+              - nxp,imx93-dwmac-eqos
           - const: snps,dwmac-5.10a
 
   clocks:
@@ -54,6 +58,10 @@ properties:
 
   intf_mode:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the GPR syscon
+          - description: the offset of the GPR register
     description:
       Should be phandle/offset pair. The phandle to the syscon node which
       encompases the GPR register, and the offset of the GPR register.
@@ -88,5 +96,4 @@ examples:
                      <&clk IMX8MP_CLK_ENET_QOS>;
             clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
             phy-mode = "rgmii";
-            status = "disabled";
     };
diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
index d51da24f3505..ab8867e6939b 100644
--- a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml
@@ -31,6 +31,22 @@ patternProperties:
         description:
           The ID number for the child PHY. Should be +1 of parent PHY.
 
+      nxp,rmii-refclk-in:
+        type: boolean
+        description: |
+          The REF_CLK is provided for both transmitted and received data
+          in RMII mode. This clock signal is provided by the PHY and is
+          typically derived from an external 25MHz crystal. Alternatively,
+          a 50MHz clock signal generated by an external oscillator can be
+          connected to pin REF_CLK. A third option is to connect a 25MHz
+          clock to pin CLK_IN_OUT. So, the REF_CLK should be configured
+          as input or output according to the actual circuit connection.
+          If present, indicates that the REF_CLK will be configured as
+          interface reference clock input when RMII mode enabled.
+          If not present, the REF_CLK will be configured as interface
+          reference clock output when RMII mode enabled.
+          Only supported on TJA1100 and TJA1101.
+
     required:
       - reg
 
@@ -44,6 +60,7 @@ examples:
 
         tja1101_phy0: ethernet-phy@4 {
             reg = <0x4>;
+            nxp,rmii-refclk-in;
         };
     };
   - |
diff --git a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
index d7117a22fd87..27db496f1ce8 100644
--- a/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/oxnas-dwmac.txt
@@ -9,6 +9,9 @@ Required properties on all platforms:
 - compatible:	For the OX820 SoC, it should be :
 		- "oxsemi,ox820-dwmac" to select glue
 		- "snps,dwmac-3.512" to select IP version.
+		For the OX810SE SoC, it should be :
+		- "oxsemi,ox810se-dwmac" to select glue
+		- "snps,dwmac-3.512" to select IP version.
 
 - clocks: Should contain phandles to the following clocks
 - clock-names:	Should contain the following:
diff --git a/Documentation/devicetree/bindings/net/pcs/fsl,lynx-pcs.yaml b/Documentation/devicetree/bindings/net/pcs/fsl,lynx-pcs.yaml
new file mode 100644
index 000000000000..fbedf696c555
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pcs/fsl,lynx-pcs.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/fsl,lynx-pcs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Lynx PCS
+
+maintainers:
+  - Ioana Ciornei <ioana.ciornei@nxp.com>
+
+description: |
+  NXP Lynx 10G and 28G SerDes have Ethernet PCS devices which can be used as
+  protocol controllers. They are accessible over the Ethernet interface's MDIO
+  bus.
+
+properties:
+  compatible:
+    const: fsl,lynx-pcs
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    mdio-bus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qsgmii_pcs1: ethernet-pcs@1 {
+        compatible = "fsl,lynx-pcs";
+        reg = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml b/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
new file mode 100644
index 000000000000..66a95191bd77
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/mediatek,sgmiisys.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SGMIISYS Controller
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description:
+  The MediaTek SGMIISYS controller provides a SGMII PCS and some clocks
+  to the ethernet subsystem to which it is attached.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt7622-sgmiisys
+          - mediatek,mt7629-sgmiisys
+          - mediatek,mt7981-sgmiisys_0
+          - mediatek,mt7981-sgmiisys_1
+          - mediatek,mt7986-sgmiisys_0
+          - mediatek,mt7986-sgmiisys_1
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+  mediatek,pnswap:
+    description: Invert polarity of the SGMII data lanes
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      sgmiisys: syscon@1b128000 {
+        compatible = "mediatek,mt7622-sgmiisys", "syscon";
+        reg = <0 0x1b128000 0 0x1000>;
+        #clock-cells = <1>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
new file mode 100644
index 000000000000..2d33bbab7163
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/renesas,rzn1-miic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 MII converter
+
+maintainers:
+  - Clément Léger <clement.leger@bootlin.com>
+
+description: |
+  This MII converter is present on the Renesas RZ/N1 SoC family. It is
+  responsible to do MII passthrough or convert it to RMII/RGMII.
+
+properties:
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-miic
+      - const: renesas,rzn1-miic
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: MII reference clock
+      - description: RGMII reference clock
+      - description: RMII reference clock
+      - description: AHB clock used for the MII converter register interface
+
+  clock-names:
+    items:
+      - const: mii_ref
+      - const: rgmii_ref
+      - const: rmii_ref
+      - const: hclk
+
+  renesas,miic-switch-portin:
+    description: MII Switch PORTIN configuration. This value should use one of
+      the values defined in dt-bindings/net/pcs-rzn1-miic.h.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2]
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^mii-conv@[0-5]$":
+    type: object
+    description: MII converter port
+
+    properties:
+      reg:
+        description: MII Converter port number.
+        enum: [1, 2, 3, 4, 5]
+
+      renesas,miic-input:
+        description: Converter input port configuration. This value should use
+          one of the values defined in dt-bindings/net/pcs-rzn1-miic.h.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - reg
+      - renesas,miic-input
+
+    additionalProperties: false
+
+    allOf:
+      - if:
+          properties:
+            reg:
+              const: 1
+        then:
+          properties:
+            renesas,miic-input:
+              const: 0
+      - if:
+          properties:
+            reg:
+              const: 2
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [1, 11]
+      - if:
+          properties:
+            reg:
+              const: 3
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [7, 10]
+      - if:
+          properties:
+            reg:
+              const: 4
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [4, 6, 9, 13]
+      - if:
+          properties:
+            reg:
+              const: 5
+        then:
+          properties:
+            renesas,miic-input:
+              enum: [3, 5, 8, 12]
+
+required:
+  - '#address-cells'
+  - '#size-cells'
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/net/pcs-rzn1-miic.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+
+    eth-miic@44030000 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      compatible = "renesas,r9a06g032-miic", "renesas,rzn1-miic";
+      reg = <0x44030000 0x10000>;
+      clocks = <&sysctrl R9A06G032_CLK_MII_REF>,
+              <&sysctrl R9A06G032_CLK_RGMII_REF>,
+              <&sysctrl R9A06G032_CLK_RMII_REF>,
+              <&sysctrl R9A06G032_HCLK_SWITCH_RG>;
+      clock-names = "mii_ref", "rgmii_ref", "rmii_ref", "hclk";
+      renesas,miic-switch-portin = <MIIC_GMAC2_PORT>;
+      power-domains = <&sysctrl>;
+
+      mii_conv1: mii-conv@1 {
+        renesas,miic-input = <MIIC_GMAC1_PORT>;
+        reg = <1>;
+      };
+
+      mii_conv2: mii-conv@2 {
+        renesas,miic-input = <MIIC_SWITCH_PORTD>;
+        reg = <2>;
+      };
+
+      mii_conv3: mii-conv@3 {
+        renesas,miic-input = <MIIC_SWITCH_PORTC>;
+        reg = <3>;
+      };
+
+      mii_conv4: mii-conv@4 {
+        renesas,miic-input = <MIIC_SWITCH_PORTB>;
+        reg = <4>;
+      };
+
+      mii_conv5: mii-conv@5 {
+        renesas,miic-input = <MIIC_SWITCH_PORTA>;
+        reg = <5>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml b/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml
new file mode 100644
index 000000000000..94a527e6aa1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pse-pd/podl-pse-regulator.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pse-pd/podl-pse-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator based Power Sourcing Equipment
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: Regulator based PoDL PSE controller. The device must be referenced
+  by the PHY node to control power injection to the Ethernet cable.
+
+allOf:
+  - $ref: pse-controller.yaml#
+
+properties:
+  compatible:
+    const: podl-pse-regulator
+
+  '#pse-cells':
+    const: 0
+
+  pse-supply:
+    description: Power supply for the PSE controller
+
+additionalProperties: false
+
+required:
+  - compatible
+  - pse-supply
+
+examples:
+  - |
+    ethernet-pse {
+      compatible = "podl-pse-regulator";
+      pse-supply = <&reg_t1l1>;
+      #pse-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml
new file mode 100644
index 000000000000..b110abb42597
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pse-pd/pse-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Power Sourcing Equipment (PSE).
+
+description: Binding for the Power Sourcing Equipment (PSE) as defined in the
+  IEEE 802.3 specification. It is designed for hardware which is delivering
+  power over twisted pair/ethernet cable. The ethernet-pse nodes should be
+  used to describe PSE controller and referenced by the ethernet-phy node.
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+properties:
+  $nodename:
+    pattern: "^ethernet-pse(@.*)?$"
+
+  "#pse-cells":
+    description:
+      Used to uniquely identify a PSE instance within an IC. Will be
+      0 on PSE nodes with only a single output and at least 1 on nodes
+      controlling several outputs.
+    enum: [0, 1]
+
+required:
+  - "#pse-cells"
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
index cf4d35edaa1b..89f94b31b546 100644
--- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
+++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
@@ -34,14 +34,6 @@ properties:
   interrupts:
     maxItems: 1
 
-  '#address-cells':
-    description: number of address cells for the MDIO bus
-    const: 1
-
-  '#size-cells':
-    description: number of size cells on the MDIO bus
-    const: 0
-
   clocks:
     items:
       - description: MAC main clock
@@ -62,6 +54,10 @@ properties:
       - const: mac
       - const: mdio
 
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
 required:
   - compatible
   - reg
@@ -85,7 +81,6 @@ examples:
         reset-names = "mac", "mdio";
         clocks = <&pll 1>, <&pll 2>;
         clock-names = "eth", "mdio";
-        qca,ethcfg = <&ethcfg>;
         phy-mode = "mii";
         phy-handle = <&phy_port4>;
     };
@@ -111,9 +106,6 @@ examples:
             #size-cells = <0>;
 
             switch10: switch@10 {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
                 compatible = "qca,ar9331-switch";
                 reg = <0x10>;
                 resets = <&rst 8>;
@@ -131,7 +123,6 @@ examples:
 
                     switch_port0: port@0 {
                         reg = <0x0>;
-                        label = "cpu";
                         ethernet = <&eth1>;
 
                         phy-mode = "gmii";
diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
index b3d4013b7ca6..161d28919316 100644
--- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml
+++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
@@ -40,6 +40,14 @@ properties:
       Only supported on the AR8031.
     type: boolean
 
+  qca,disable-hibernation-mode:
+    description: |
+      Disable Atheros AR803X PHYs hibernation mode. If present, indicates
+      that the hardware of PHY will not enter power saving mode when the
+      cable is disconnected. And the RX_CLK always keeps outputting a
+      valid clock.
+    type: boolean
+
   qca,smarteee-tw-us-100m:
     description: EEE Tw parameter for 100M links.
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml b/Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml
new file mode 100644
index 000000000000..b30544410d09
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,bam-dmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm BAM Data Multiplexer
+
+maintainers:
+  - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+  The BAM Data Multiplexer provides access to the network data channels
+  of modems integrated into many older Qualcomm SoCs, e.g. Qualcomm MSM8916
+  or MSM8974. It is built using a simple protocol layer on top of a DMA engine
+  (Qualcomm BAM DMA) and bidirectional interrupts to coordinate power control.
+
+  Note that this schema does not directly describe a hardware block but rather
+  a firmware convention that combines several other hardware blocks (such as the
+  DMA engine). As such it is specific to a firmware version, not a particular
+  SoC or hardware version.
+
+properties:
+  compatible:
+    const: qcom,bam-dmux
+
+  interrupts:
+    description:
+      Interrupts used by the modem to signal the AP.
+      Both interrupts must be declared as IRQ_TYPE_EDGE_BOTH.
+    items:
+      - description: Power control
+      - description: Power control acknowledgment
+
+  interrupt-names:
+    items:
+      - const: pc
+      - const: pc-ack
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: State bits used by the AP to signal the modem.
+    items:
+      - description: Power control
+      - description: Power control acknowledgment
+
+  qcom,smem-state-names:
+    description: Names for the state bits used by the AP to signal the modem.
+    items:
+      - const: pc
+      - const: pc-ack
+
+  dmas:
+    items:
+      - description: TX DMA channel phandle
+      - description: RX DMA channel phandle
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - interrupts
+  - interrupt-names
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - dmas
+  - dma-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    mpss: remoteproc {
+        bam-dmux {
+            compatible = "qcom,bam-dmux";
+
+            interrupt-parent = <&modem_smsm>;
+            interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>;
+            interrupt-names = "pc", "pc-ack";
+
+            qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>;
+            qcom,smem-state-names = "pc", "pc-ack";
+
+            dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>;
+            dma-names = "tx", "rx";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.txt b/Documentation/devicetree/bindings/net/qcom,ethqos.txt
deleted file mode 100644
index fcf5035810b5..000000000000
--- a/Documentation/devicetree/bindings/net/qcom,ethqos.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-Qualcomm Ethernet ETHQOS device
-
-This documents dwmmac based ethernet device which supports Gigabit
-ethernet for version v2.3.0 onwards.
-
-This device has following properties:
-
-Required properties:
-
-- compatible: Should be qcom,qcs404-ethqos"
-
-- reg: Address and length of the register set for the device
-
-- reg-names: Should contain register names "stmmaceth", "rgmii"
-
-- clocks: Should contain phandle to clocks
-
-- clock-names: Should contain clock names "stmmaceth", "pclk",
-		"ptp_ref", "rgmii"
-
-- interrupts: Should contain phandle to interrupts
-
-- interrupt-names: Should contain interrupt names "macirq", "eth_lpi"
-
-Rest of the properties are defined in stmmac.txt file in same directory
-
-
-Example:
-
-ethernet: ethernet@7a80000 {
-	compatible = "qcom,qcs404-ethqos";
-	reg = <0x07a80000 0x10000>,
-		<0x07a96000 0x100>;
-	reg-names = "stmmaceth", "rgmii";
-	clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
-	clocks = <&gcc GCC_ETH_AXI_CLK>,
-		<&gcc GCC_ETH_SLAVE_AHB_CLK>,
-		<&gcc GCC_ETH_PTP_CLK>,
-		<&gcc GCC_ETH_RGMII_CLK>;
-	interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-	interrupt-names = "macirq", "eth_lpi";
-	snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-
-	snps,txpbl = <8>;
-	snps,rxpbl = <2>;
-	snps,aal;
-	snps,tso;
-
-	phy-handle = <&phy1>;
-	phy-mode = "rgmii";
-
-	mdio {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-		compatible = "snps,dwmac-mdio";
-		phy1: phy@4 {
-			device_type = "ethernet-phy";
-			reg = <0x4>;
-		};
-	};
-
-};
diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
new file mode 100644
index 000000000000..60a38044fb19
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,ethqos.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Ethernet ETHQOS device
+
+maintainers:
+  - Bhupesh Sharma <bhupesh.sharma@linaro.org>
+
+description:
+  dwmmac based Qualcomm ethernet devices which support Gigabit
+  ethernet (version v2.3.0 and onwards).
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,qcs404-ethqos
+      - qcom,sc8280xp-ethqos
+      - qcom,sm8150-ethqos
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: stmmaceth
+      - const: rgmii
+
+  interrupts:
+    items:
+      - description: Combined signal for various interrupt events
+      - description: The interrupt that occurs when Rx exits the LPI state
+
+  interrupt-names:
+    items:
+      - const: macirq
+      - const: eth_lpi
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: stmmaceth
+      - const: pclk
+      - const: ptp_ref
+      - const: rgmii
+
+  iommus:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-qcs404.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    ethernet: ethernet@7a80000 {
+      compatible = "qcom,qcs404-ethqos";
+      reg = <0x07a80000 0x10000>,
+            <0x07a96000 0x100>;
+      reg-names = "stmmaceth", "rgmii";
+      clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+      clocks = <&gcc GCC_ETH_AXI_CLK>,
+               <&gcc GCC_ETH_SLAVE_AHB_CLK>,
+               <&gcc GCC_ETH_PTP_CLK>,
+               <&gcc GCC_ETH_RGMII_CLK>;
+      interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "macirq", "eth_lpi";
+
+      rx-fifo-depth = <4096>;
+      tx-fifo-depth = <4096>;
+
+      snps,tso;
+      snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
+      snps,reset-active-low;
+      snps,reset-delays-us = <0 10000 10000>;
+
+      pinctrl-names = "default";
+      pinctrl-0 = <&ethernet_defaults>;
+
+      phy-handle = <&phy1>;
+      phy-mode = "rgmii";
+      mdio {
+        #address-cells = <0x1>;
+        #size-cells = <0x0>;
+
+        compatible = "snps,dwmac-mdio";
+        phy1: phy@4 {
+          compatible = "ethernet-phy-ieee802.3-c22";
+          device_type = "ethernet-phy";
+          reg = <0x4>;
+
+          #phy-cells = <0>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index b8a0b392b24e..2d5e4ffb2f9e 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -49,6 +49,8 @@ properties:
       - qcom,sc7280-ipa
       - qcom,sdm845-ipa
       - qcom,sdx55-ipa
+      - qcom,sdx65-ipa
+      - qcom,sm6350-ipa
       - qcom,sm8350-ipa
 
   reg:
@@ -64,7 +66,8 @@ properties:
       - const: gsi
 
   iommus:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   clocks:
     maxItems: 1
@@ -106,6 +109,10 @@ properties:
           - const: imem
           - const: config
 
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the AOSS side-channel message RAM
+
   qcom,smem-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: State bits used in by the AP to signal the modem.
@@ -119,19 +126,31 @@ properties:
       - const: ipa-clock-enabled-valid
       - const: ipa-clock-enabled
 
+  qcom,gsi-loader:
+    enum:
+      - self
+      - modem
+      - skip
+    description:
+      Indicates how GSI firmware should be loaded.  If the AP loads
+      and validates GSI firmware, this property has value "self".
+      If the modem does this, this property has value "modem".
+      Otherwise, "skip" means GSI firmware loading is not required.
+
   modem-init:
+    deprecated: true
     type: boolean
     description:
-      If present, it indicates that the modem is responsible for
-      performing early IPA initialization, including loading and
-      validating firwmare used by the GSI.
+      This is the older (deprecated) way of indicating how GSI firmware
+      should be loaded.  If present, the modem loads GSI firmware; if
+      absent, the AP loads GSI firmware.
 
   memory-region:
     maxItems: 1
     description:
       If present, a phandle for a reserved memory area that holds
       the firmware passed to Trust Zone for authentication.  Required
-      when Trust Zone (not the modem) performs early initialization.
+      when the AP (not the modem) performs early initialization.
 
   firmware-name:
     $ref: /schemas/types.yaml#/definitions/string
@@ -150,22 +169,36 @@ required:
   - interconnects
   - qcom,smem-states
 
-# Either modem-init is present, or memory-region must be present.
-oneOf:
-  - required:
-      - modem-init
-  - required:
-      - memory-region
-
-# If memory-region is present, firmware-name may optionally be present.
-# But if modem-init is present, firmware-name must not be present.
-if:
-  required:
-    - modem-init
-then:
-  not:
-    required:
-      - firmware-name
+allOf:
+  # If qcom,gsi-loader is present, modem-init must not be present
+  - if:
+      required:
+        - qcom,gsi-loader
+    then:
+      properties:
+        modem-init: false
+
+      # If qcom,gsi-loader is "self", the AP loads GSI firmware, and
+      # memory-region must be specified
+      if:
+        properties:
+          qcom,gsi-loader:
+            contains:
+              const: self
+      then:
+        required:
+          - memory-region
+    else:
+      # If qcom,gsi-loader is not present, we use deprecated behavior.
+      # If modem-init is not present, the AP loads GSI firmware, and
+      # memory-region must be specified.
+      if:
+        not:
+          required:
+            - modem-init
+      then:
+        required:
+          - memory-region
 
 additionalProperties: false
 
@@ -177,6 +210,12 @@ examples:
 
         smp2p-mpss {
                 compatible = "qcom,smp2p";
+                interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+                mboxes = <&apss_shared 6>;
+                qcom,smem = <94>, <432>;
+                qcom,local-pid = <0>;
+                qcom,remote-pid = <5>;
+
                 ipa_smp2p_out: ipa-ap-to-modem {
                         qcom,entry-name = "ipa";
                         #qcom,smem-state-cells = <1>;
@@ -188,15 +227,19 @@ examples:
                         #interrupt-cells = <2>;
                 };
         };
+
         ipa@1e40000 {
-                compatible = "qcom,sdm845-ipa";
+                compatible = "qcom,sc7180-ipa";
 
-                modem-init;
+                qcom,gsi-loader = "self";
+                memory-region = <&ipa_fw_mem>;
+                firmware-name = "qcom/sc7180-trogdor/modem/modem.mdt";
 
-                iommus = <&apps_smmu 0x720 0x3>;
+                iommus = <&apps_smmu 0x440 0x0>,
+                         <&apps_smmu 0x442 0x0>;
                 reg = <0x1e40000 0x7000>,
-                        <0x1e47000 0x2000>,
-                        <0x1e04000 0x2c000>;
+                      <0x1e47000 0x2000>,
+                      <0x1e04000 0x2c000>;
                 reg-names = "ipa-reg",
                             "ipa-shared",
                             "gsi";
@@ -214,13 +257,15 @@ examples:
                 clock-names = "core";
 
                 interconnects =
-                        <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_EBI1>,
-                        <&rsc_hlos MASTER_IPA &rsc_hlos SLAVE_IMEM>,
-                        <&rsc_hlos MASTER_APPSS_PROC &rsc_hlos SLAVE_IPA_CFG>;
+                        <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+                        <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
+                        <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
                 interconnect-names = "memory",
                                      "imem",
                                      "config";
 
+                qcom,qmp = <&aoss_qmp>;
+
                 qcom,smem-states = <&ipa_smp2p_out 0>,
                                    <&ipa_smp2p_out 1>;
                 qcom,smem-state-names = "ipa-clock-enabled-valid",
diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
index 2af304341772..3407e909e8a7 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
@@ -4,19 +4,23 @@
 $id: http://devicetree.org/schemas/net/qcom,ipq4019-mdio.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm IPQ40xx MDIO Controller Device Tree Bindings
+title: Qualcomm IPQ40xx MDIO Controller
 
 maintainers:
   - Robert Marko <robert.marko@sartura.hr>
 
-allOf:
-  - $ref: "mdio.yaml#"
-
 properties:
   compatible:
-    enum:
-      - qcom,ipq4019-mdio
-      - qcom,ipq5018-mdio
+    oneOf:
+      - enum:
+          - qcom,ipq4019-mdio
+          - qcom,ipq5018-mdio
+
+      - items:
+          - enum:
+              - qcom,ipq6018-mdio
+              - qcom,ipq8074-mdio
+          - const: qcom,ipq4019-mdio
 
   "#address-cells":
     const: 1
@@ -33,10 +37,12 @@ properties:
       address range is only required by the platform IPQ50xx.
 
   clocks:
-    maxItems: 1
-    description: |
-      MDIO clock source frequency fixed to 100MHZ, this clock should be specified
-      by the platform IPQ807x, IPQ60xx and IPQ50xx.
+    items:
+      - description: MDIO clock source frequency fixed to 100MHZ
+
+  clock-names:
+    items:
+      - const: gcc_mdio_ahb_clk
 
 required:
   - compatible
@@ -44,6 +50,26 @@ required:
   - "#address-cells"
   - "#size-cells"
 
+allOf:
+  - $ref: mdio.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq5018-mdio
+              - qcom,ipq6018-mdio
+              - qcom,ipq8074-mdio
+    then:
+      required:
+        - clocks
+        - clock-names
+    else:
+      properties:
+        clocks: false
+        clock-names: false
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
index 948677ade6d1..164704338ef0 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml
@@ -14,7 +14,7 @@ description:
   used to communicate with the gmac phy connected.
 
 allOf:
-  - $ref: "mdio.yaml#"
+  - $ref: mdio.yaml#
 
 properties:
   compatible:
@@ -51,6 +51,11 @@ examples:
         switch@10 {
             compatible = "qca,qca8337";
             reg = <0x10>;
-            /* ... */
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                /* ... */
+            };
         };
     };
diff --git a/Documentation/devicetree/bindings/net/qcom-emac.txt b/Documentation/devicetree/bindings/net/qcom-emac.txt
index 346e6c7f47b7..7ae8aa148634 100644
--- a/Documentation/devicetree/bindings/net/qcom-emac.txt
+++ b/Documentation/devicetree/bindings/net/qcom-emac.txt
@@ -14,7 +14,7 @@ MAC node:
 - mac-address : The 6-byte MAC address. If present, it is the default
 	MAC address.
 - internal-phy : phandle to the internal PHY node
-- phy-handle : phandle the the external PHY node
+- phy-handle : phandle to the external PHY node
 
 Internal PHY node:
 - compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii".
diff --git a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt b/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
deleted file mode 100644
index 9fe1a0a22e44..000000000000
--- a/Documentation/devicetree/bindings/net/ralink,rt2880-net.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Ralink Frame Engine Ethernet controller
-=======================================
-
-The Ralink frame engine ethernet controller can be found on Ralink and
-Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8).
-
-Depending on the SoC, there is a number of ports connected to the CPU port
-directly and/or via a (gigabit-)switch.
-
-* Ethernet controller node
-
-Required properties:
-- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth",
-  "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth",
-  "mediatek,mt7620-eth", "mediatek,mt7621-eth"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the frame engines interrupt
-- resets: Should contain the frame engines resets
-- reset-names: Should contain the reset names "fe". If a switch is present
-  "esw" is also required.
-
-
-* Ethernet port node
-
-Required properties:
-- compatible: Should be "ralink,eth-port"
-- reg: The number of the physical port
-- phy-handle: reference to the node describing the phy
-
-Example:
-
-mdio-bus {
-	...
-	phy0: ethernet-phy@0 {
-		phy-mode = "mii";
-		reg = <0>;
-	};
-};
-
-ethernet@400000 {
-	compatible = "ralink,rt2880-eth";
-	reg = <0x00400000 10000>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	resets = <&rstctrl 18>;
-	reset-names = "fe";
-
-	interrupt-parent = <&cpuintc>;
-	interrupts = <5>;
-
-	port@0 {
-		compatible = "ralink,eth-port";
-		reg = <0>;
-		phy-handle = <&phy0>;
-	};
-
-};
diff --git a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt b/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
deleted file mode 100644
index 87e315856efa..000000000000
--- a/Documentation/devicetree/bindings/net/ralink,rt3050-esw.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Ralink Fast Ethernet Embedded Switch
-====================================
-
-The ralink fast ethernet embedded switch can be found on Ralink and Mediatek
-SoCs (RT3x5x, RT5350, MT76x8).
-
-Required properties:
-- compatible: Should be "ralink,rt3050-esw"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the embedded switches interrupt
-- resets: Should contain the embedded switches resets
-- reset-names: Should contain the reset names "esw"
-
-Optional properties:
-- ralink,portmap: can be used to choose if the default switch setup is
-  llllw or wllll
-- ralink,led_polarity: override the active high/low settings of the leds
-
-Example:
-
-esw@10110000 {
-	compatible = "ralink,rt3050-esw";
-	reg = <0x10110000 8000>;
-
-	resets = <&rstctrl 23>;
-	reset-names = "esw";
-
-	interrupt-parent = <&intc>;
-	interrupts = <17>;
-};
diff --git a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
index 0634e69dd9a6..8cc2b9924680 100644
--- a/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
+++ b/Documentation/devicetree/bindings/net/realtek-bluetooth.yaml
@@ -4,23 +4,30 @@
 $id: http://devicetree.org/schemas/net/realtek-bluetooth.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: RTL8723BS/RTL8723CS/RTL8822CS Bluetooth Device Tree Bindings
+title: RTL8723BS/RTL8723CS/RTL8821CS/RTL8822CS Bluetooth
 
 maintainers:
   - Vasily Khoruzhick <anarsoul@gmail.com>
   - Alistair Francis <alistair@alistair23.me>
 
 description:
-  RTL8723CS/RTL8723CS/RTL8822CS is WiFi + BT chip. WiFi part is connected over
-  SDIO, while BT is connected over serial. It speaks H5 protocol with few
-  extra commands to upload firmware and change module speed.
+  RTL8723CS/RTL8723CS/RTL8821CS/RTL8822CS is a WiFi + BT chip. WiFi part
+  is connected over SDIO, while BT is connected over serial. It speaks
+  H5 protocol with few extra commands to upload firmware and change
+  module speed.
 
 properties:
   compatible:
-    enum:
-      - realtek,rtl8723bs-bt
-      - realtek,rtl8723cs-bt
-      - realtek,rtl8822cs-bt
+    oneOf:
+      - enum:
+          - realtek,rtl8723bs-bt
+          - realtek,rtl8723cs-bt
+          - realtek,rtl8723ds-bt
+          - realtek,rtl8822cs-bt
+      - items:
+          - enum:
+              - realtek,rtl8821cs-bt
+          - const: realtek,rtl8822cs-bt
 
   device-wake-gpios:
     maxItems: 1
@@ -34,6 +41,8 @@ properties:
     maxItems: 1
     description: GPIO specifier, used to wakeup the host processor
 
+  max-speed: true
+
 required:
   - compatible
 
diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml
index c101a1ec846e..06b38c9bc6ec 100644
--- a/Documentation/devicetree/bindings/net/renesas,ether.yaml
+++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml
@@ -100,15 +100,18 @@ additionalProperties: false
 examples:
   # Lager board
   - |
-    #include <dt-bindings/clock/r8a7790-clock.h>
-    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+    #include <dt-bindings/gpio/gpio.h>
 
     ethernet@ee700000 {
         compatible = "renesas,ether-r8a7790", "renesas,rcar-gen2-ether";
         reg = <0xee700000 0x400>;
-        interrupt-parent = <&gic>;
-        interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
+        interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 813>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 813>;
         phy-mode = "rmii";
         phy-handle = <&phy1>;
         renesas,ether-link-active-low;
@@ -116,8 +119,12 @@ examples:
         #size-cells = <0>;
 
         phy1: ethernet-phy@1 {
+            compatible = "ethernet-phy-id0022.1537",
+                         "ethernet-phy-ieee802.3-c22";
             reg = <1>;
             interrupt-parent = <&irqc0>;
             interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+            micrel,led-mode = <1>;
+            reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
         };
     };
diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
index 4c927d2c17d3..3f41294f5997 100644
--- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
+++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
@@ -40,13 +40,25 @@ properties:
               - renesas,etheravb-r8a77980     # R-Car V3H
               - renesas,etheravb-r8a77990     # R-Car E3
               - renesas,etheravb-r8a77995     # R-Car D3
-              - renesas,etheravb-r8a779a0     # R-Car V3U
           - const: renesas,etheravb-rcar-gen3 # R-Car Gen3 and RZ/G2
 
       - items:
           - enum:
+              - renesas,etheravb-r8a779a0     # R-Car V3U
+              - renesas,etheravb-r8a779g0     # R-Car V4H
+          - const: renesas,etheravb-rcar-gen4 # R-Car Gen4
+
+      - items:
+          - enum:
+              - renesas,etheravb-r9a09g011 # RZ/V2M
+          - const: renesas,etheravb-rzv2m  # RZ/V2M compatible
+
+      - items:
+          - enum:
+              - renesas,r9a07g043-gbeth # RZ/G2UL
               - renesas,r9a07g044-gbeth # RZ/G2{L,LC}
-          - const: renesas,rzg2l-gbeth  # RZ/G2L
+              - renesas,r9a07g054-gbeth # RZ/V2L
+          - const: renesas,rzg2l-gbeth  # RZ/{G2L,G2UL,V2L} family
 
   reg: true
 
@@ -158,16 +170,33 @@ allOf:
             - const: arp_ns
         rx-internal-delay-ps: false
     else:
-      properties:
-        interrupts:
-          minItems: 25
-          maxItems: 25
-        interrupt-names:
-          items:
-            pattern: '^ch[0-9]+$'
-      required:
-        - interrupt-names
-        - rx-internal-delay-ps
+      if:
+        properties:
+          compatible:
+            contains:
+              const: renesas,etheravb-rzv2m
+      then:
+        properties:
+          interrupts:
+            minItems: 29
+            maxItems: 29
+          interrupt-names:
+            items:
+              pattern: '^(ch(1?)[0-9])|ch20|ch21|dia|dib|err_a|err_b|mgmt_a|mgmt_b|line3$'
+          rx-internal-delay-ps: false
+        required:
+          - interrupt-names
+      else:
+        properties:
+          interrupts:
+            minItems: 25
+            maxItems: 25
+          interrupt-names:
+            items:
+              pattern: '^ch[0-9]+$'
+        required:
+          - interrupt-names
+          - rx-internal-delay-ps
 
   - if:
       properties:
@@ -183,7 +212,7 @@ allOf:
               - renesas,etheravb-r8a77965
               - renesas,etheravb-r8a77970
               - renesas,etheravb-r8a77980
-              - renesas,etheravb-r8a779a0
+              - renesas,etheravb-rcar-gen4
     then:
       required:
         - tx-internal-delay-ps
@@ -229,17 +258,35 @@ allOf:
             - const: chi
             - const: refclk
     else:
-      properties:
-        clocks:
-          minItems: 1
-          items:
-            - description: AVB functional clock
-            - description: Optional TXC reference clock
-        clock-names:
-          minItems: 1
-          items:
-            - const: fck
-            - const: refclk
+      if:
+        properties:
+          compatible:
+            contains:
+              const: renesas,etheravb-rzv2m
+      then:
+        properties:
+          clocks:
+            items:
+              - description: Main clock
+              - description: Coherent Hub Interface clock
+              - description: gPTP reference clock
+          clock-names:
+            items:
+              - const: axi
+              - const: chi
+              - const: gptp
+      else:
+        properties:
+          clocks:
+            minItems: 1
+            items:
+              - description: AVB functional clock
+              - description: Optional TXC reference clock
+          clock-names:
+            minItems: 1
+            items:
+              - const: fck
+              - const: refclk
 
 additionalProperties: false
 
@@ -287,6 +334,7 @@ examples:
                               "ch13", "ch14", "ch15", "ch16", "ch17", "ch18",
                               "ch19", "ch20", "ch21", "ch22", "ch23", "ch24";
             clocks = <&cpg CPG_MOD 812>;
+            clock-names = "fck";
             iommus = <&ipmmu_ds0 16>;
             power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
             resets = <&cpg 812>;
@@ -298,6 +346,8 @@ examples:
             #size-cells = <0>;
 
             phy0: ethernet-phy@0 {
+                    compatible = "ethernet-phy-id0022.1622",
+                                 "ethernet-phy-ieee802.3-c22";
                     rxc-skew-ps = <1500>;
                     reg = <0>;
                     interrupt-parent = <&gpio2>;
diff --git a/Documentation/devicetree/bindings/net/renesas,r8a779f0-ether-switch.yaml b/Documentation/devicetree/bindings/net/renesas,r8a779f0-ether-switch.yaml
new file mode 100644
index 000000000000..e933a1e48d67
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/renesas,r8a779f0-ether-switch.yaml
@@ -0,0 +1,262 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,r8a779f0-ether-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Ethernet Switch
+
+maintainers:
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+  compatible:
+    const: renesas,r8a779f0-ether-switch
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: base
+      - const: secure_base
+
+  interrupts:
+    maxItems: 47
+
+  interrupt-names:
+    items:
+      - const: mfwd_error
+      - const: race_error
+      - const: coma_error
+      - const: gwca0_error
+      - const: gwca1_error
+      - const: etha0_error
+      - const: etha1_error
+      - const: etha2_error
+      - const: gptp0_status
+      - const: gptp1_status
+      - const: mfwd_status
+      - const: race_status
+      - const: coma_status
+      - const: gwca0_status
+      - const: gwca1_status
+      - const: etha0_status
+      - const: etha1_status
+      - const: etha2_status
+      - const: rmac0_status
+      - const: rmac1_status
+      - const: rmac2_status
+      - const: gwca0_rxtx0
+      - const: gwca0_rxtx1
+      - const: gwca0_rxtx2
+      - const: gwca0_rxtx3
+      - const: gwca0_rxtx4
+      - const: gwca0_rxtx5
+      - const: gwca0_rxtx6
+      - const: gwca0_rxtx7
+      - const: gwca1_rxtx0
+      - const: gwca1_rxtx1
+      - const: gwca1_rxtx2
+      - const: gwca1_rxtx3
+      - const: gwca1_rxtx4
+      - const: gwca1_rxtx5
+      - const: gwca1_rxtx6
+      - const: gwca1_rxtx7
+      - const: gwca0_rxts0
+      - const: gwca0_rxts1
+      - const: gwca1_rxts0
+      - const: gwca1_rxts1
+      - const: rmac0_mdio
+      - const: rmac1_mdio
+      - const: rmac2_mdio
+      - const: rmac0_phy
+      - const: rmac1_phy
+      - const: rmac2_phy
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  iommus:
+    maxItems: 16
+
+  power-domains:
+    maxItems: 1
+
+  ethernet-ports:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        description: Port number of ETHA (TSNA).
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^port@[0-9a-f]+$":
+        type: object
+        $ref: /schemas/net/ethernet-controller.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          reg:
+            maxItems: 1
+            description:
+              Port number of ETHA (TSNA).
+
+          phys:
+            maxItems: 1
+            description:
+              Phandle of an Ethernet SERDES.
+
+          mdio:
+            $ref: /schemas/net/mdio.yaml#
+            unevaluatedProperties: false
+
+        required:
+          - reg
+          - phy-handle
+          - phy-mode
+          - phys
+          - mdio
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+  - clocks
+  - resets
+  - power-domains
+  - ethernet-ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a779f0-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a779f0-sysc.h>
+
+    ethernet@e6880000 {
+        compatible = "renesas,r8a779f0-ether-switch";
+        reg = <0xe6880000 0x20000>, <0xe68c0000 0x20000>;
+        reg-names = "base", "secure_base";
+        interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "mfwd_error", "race_error",
+                          "coma_error", "gwca0_error",
+                          "gwca1_error", "etha0_error",
+                          "etha1_error", "etha2_error",
+                          "gptp0_status", "gptp1_status",
+                          "mfwd_status", "race_status",
+                          "coma_status", "gwca0_status",
+                          "gwca1_status", "etha0_status",
+                          "etha1_status", "etha2_status",
+                          "rmac0_status", "rmac1_status",
+                          "rmac2_status",
+                          "gwca0_rxtx0", "gwca0_rxtx1",
+                          "gwca0_rxtx2", "gwca0_rxtx3",
+                          "gwca0_rxtx4", "gwca0_rxtx5",
+                          "gwca0_rxtx6", "gwca0_rxtx7",
+                          "gwca1_rxtx0", "gwca1_rxtx1",
+                          "gwca1_rxtx2", "gwca1_rxtx3",
+                          "gwca1_rxtx4", "gwca1_rxtx5",
+                          "gwca1_rxtx6", "gwca1_rxtx7",
+                          "gwca0_rxts0", "gwca0_rxts1",
+                          "gwca1_rxts0", "gwca1_rxts1",
+                          "rmac0_mdio", "rmac1_mdio",
+                          "rmac2_mdio",
+                          "rmac0_phy", "rmac1_phy",
+                          "rmac2_phy";
+        clocks = <&cpg CPG_MOD 1505>;
+        power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+        resets = <&cpg 1505>;
+
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            port@0 {
+                reg = <0>;
+                phy-handle = <&eth_phy0>;
+                phy-mode = "sgmii";
+                phys = <&eth_serdes 0>;
+                mdio {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                };
+            };
+            port@1 {
+                reg = <1>;
+                phy-handle = <&eth_phy1>;
+                phy-mode = "sgmii";
+                phys = <&eth_serdes 1>;
+                mdio {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                };
+            };
+            port@2 {
+                reg = <2>;
+                phy-handle = <&eth_phy2>;
+                phy-mode = "sgmii";
+                phys = <&eth_serdes 2>;
+                mdio {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/rfkill-gpio.yaml b/Documentation/devicetree/bindings/net/rfkill-gpio.yaml
new file mode 100644
index 000000000000..9630c8466fac
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/rfkill-gpio.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/rfkill-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO controlled rfkill switch
+
+maintainers:
+  - Johannes Berg <johannes@sipsolutions.net>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+properties:
+  compatible:
+    const: rfkill-gpio
+
+  label:
+    description: rfkill switch name, defaults to node name
+
+  radio-type:
+    description: rfkill radio type
+    enum:
+      - bluetooth
+      - fm
+      - gps
+      - nfc
+      - ultrawideband
+      - wimax
+      - wlan
+      - wwan
+
+  shutdown-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - radio-type
+  - shutdown-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    rfkill {
+        compatible = "rfkill-gpio";
+        label = "rfkill-pcie-wlan";
+        radio-type = "wlan";
+        shutdown-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+    };
diff --git a/Documentation/devicetree/bindings/net/rockchip,emac.yaml b/Documentation/devicetree/bindings/net/rockchip,emac.yaml
new file mode 100644
index 000000000000..364028b3bba4
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/rockchip,emac.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/rockchip,emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3036/RK3066/RK3188 Ethernet Media Access Controller (EMAC)
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-emac
+      - rockchip,rk3066-emac
+      - rockchip,rk3188-emac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: host clock
+      - description: reference clock
+      - description: mac TX/RX clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: hclk
+      - const: macref
+      - const: macclk
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon GRF used to control speed and mode for the EMAC.
+
+  phy-supply:
+    description:
+      Phandle to a regulator if the PHY needs one.
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - rockchip,grf
+  - phy
+  - phy-mode
+  - mdio
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3036-emac
+
+    then:
+      properties:
+        clocks:
+          minItems: 3
+
+        clock-names:
+          minItems: 3
+
+    else:
+      properties:
+        clocks:
+          maxItems: 2
+
+        clock-names:
+          maxItems: 2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru-common.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@10204000 {
+      compatible = "rockchip,rk3188-emac";
+      reg = <0xc0fc2000 0x3c>;
+      interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
+      clock-names = "hclk", "macref";
+      rockchip,grf = <&grf>;
+      pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+      pinctrl-names = "default";
+      phy = <&phy0>;
+      phy-mode = "rmii";
+      phy-supply = <&vcc_rmii>;
+
+      mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        phy0: ethernet-phy@0 {
+          reg = <1>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
index 083623c8d718..2a21bbe02892 100644
--- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/net/rockchip-dwmac.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/rockchip-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Rockchip 10/100/1000 Ethernet driver(GMAC)
 
@@ -25,7 +25,9 @@ select:
           - rockchip,rk3368-gmac
           - rockchip,rk3399-gmac
           - rockchip,rk3568-gmac
+          - rockchip,rk3588-gmac
           - rockchip,rv1108-gmac
+          - rockchip,rv1126-gmac
   required:
     - compatible
 
@@ -50,6 +52,8 @@ properties:
       - items:
           - enum:
               - rockchip,rk3568-gmac
+              - rockchip,rk3588-gmac
+              - rockchip,rv1126-gmac
           - const: snps,dwmac-4.20a
 
   clocks:
@@ -81,6 +85,11 @@ properties:
     description: The phandle of the syscon node for the general register file.
     $ref: /schemas/types.yaml#/definitions/phandle
 
+  rockchip,php-grf:
+    description:
+      The phandle of the syscon node for the peripheral general register file.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
   tx_delay:
     description: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default.
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/net/sff,sfp.txt b/Documentation/devicetree/bindings/net/sff,sfp.txt
deleted file mode 100644
index 832139919f20..000000000000
--- a/Documentation/devicetree/bindings/net/sff,sfp.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP)
-Transceiver
-
-Required properties:
-
-- compatible : must be one of
-  "sff,sfp" for SFP modules
-  "sff,sff" for soldered down SFF modules
-
-- i2c-bus : phandle of an I2C bus controller for the SFP two wire serial
-  interface
-
-Optional Properties:
-
-- mod-def0-gpios : GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS)
-  module presence input gpio signal, active (module absent) high. Must
-  not be present for SFF modules
-
-- los-gpios : GPIO phandle and a specifier of the Receiver Loss of Signal
-  Indication input gpio signal, active (signal lost) high
-
-- tx-fault-gpios : GPIO phandle and a specifier of the Module Transmitter
-  Fault input gpio signal, active (fault condition) high
-
-- tx-disable-gpios : GPIO phandle and a specifier of the Transmitter Disable
-  output gpio signal, active (Tx disable) high
-
-- rate-select0-gpios : GPIO phandle and a specifier of the Rx Signaling Rate
-  Select (AKA RS0) output gpio signal, low: low Rx rate, high: high Rx rate
-  Must not be present for SFF modules
-
-- rate-select1-gpios : GPIO phandle and a specifier of the Tx Signaling Rate
-  Select (AKA RS1) output gpio signal (SFP+ only), low: low Tx rate, high:
-  high Tx rate. Must not be present for SFF modules
-
-- maximum-power-milliwatt : Maximum module power consumption
-  Specifies the maximum power consumption allowable by a module in the
-  slot, in milli-Watts.  Presently, modules can be up to 1W, 1.5W or 2W.
-
-Example #1: Direct serdes to SFP connection
-
-sfp_eth3: sfp-eth3 {
-	compatible = "sff,sfp";
-	i2c-bus = <&sfp_1g_i2c>;
-	los-gpios = <&cpm_gpio2 22 GPIO_ACTIVE_HIGH>;
-	mod-def0-gpios = <&cpm_gpio2 21 GPIO_ACTIVE_LOW>;
-	maximum-power-milliwatt = <1000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&cpm_sfp_1g_pins &cps_sfp_1g_pins>;
-	tx-disable-gpios = <&cps_gpio1 24 GPIO_ACTIVE_HIGH>;
-	tx-fault-gpios = <&cpm_gpio2 19 GPIO_ACTIVE_HIGH>;
-};
-
-&cps_emac3 {
-	phy-names = "comphy";
-	phys = <&cps_comphy5 0>;
-	sfp = <&sfp_eth3>;
-};
-
-Example #2: Serdes to PHY to SFP connection
-
-sfp_eth0: sfp-eth0 {
-	compatible = "sff,sfp";
-	i2c-bus = <&sfpp0_i2c>;
-	los-gpios = <&cps_gpio1 28 GPIO_ACTIVE_HIGH>;
-	mod-def0-gpios = <&cps_gpio1 27 GPIO_ACTIVE_LOW>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&cps_sfpp0_pins>;
-	tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
-	tx-fault-gpios  = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
-};
-
-p0_phy: ethernet-phy@0 {
-	compatible = "ethernet-phy-ieee802.3-c45";
-	pinctrl-names = "default";
-	pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>;
-	reg = <0>;
-	interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>;
-	sfp = <&sfp_eth0>;
-};
-
-&cpm_eth0 {
-	phy = <&p0_phy>;
-	phy-mode = "10gbase-kr";
-};
diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml
new file mode 100644
index 000000000000..973e478a399d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/sff,sfp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Small Form Factor (SFF) Committee Small Form-factor Pluggable (SFP)
+  Transceiver
+
+maintainers:
+  - Russell King <linux@armlinux.org.uk>
+
+properties:
+  compatible:
+    enum:
+      - sff,sfp  # for SFP modules
+      - sff,sff  # for soldered down SFF modules
+
+  i2c-bus:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle of an I2C bus controller for the SFP two wire serial
+
+  maximum-power-milliwatt:
+    minimum: 1000
+    default: 1000
+    description:
+      Maximum module power consumption Specifies the maximum power consumption
+      allowable by a module in the slot, in milli-Watts. Presently, modules can
+      be up to 1W, 1.5W or 2W.
+
+  "mod-def0-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) module
+      presence input gpio signal, active (module absent) high. Must not be
+      present for SFF modules
+
+  "los-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Receiver Loss of Signal Indication
+      input gpio signal, active (signal lost) high
+
+  "tx-fault-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Module Transmitter Fault input gpio
+      signal, active (fault condition) high
+
+  "tx-disable-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Transmitter Disable output gpio
+      signal, active (Tx disable) high
+
+  "rate-select0-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0)
+      output gpio signal, low - low Rx rate, high - high Rx rate Must not be
+      present for SFF modules
+
+  "rate-select1-gpios":
+    maxItems: 1
+    description:
+      GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1)
+      output gpio signal (SFP+ only), low - low Tx rate, high - high Tx rate. Must
+      not be present for SFF modules
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: sff,sff
+    then:
+      properties:
+        mod-def0-gpios: false
+        rate-select0-gpios: false
+        rate-select1-gpios: false
+
+required:
+  - compatible
+  - i2c-bus
+
+additionalProperties: false
+
+examples:
+  - | # Direct serdes to SFP connection
+    #include <dt-bindings/gpio/gpio.h>
+
+    sfp1: sfp {
+      compatible = "sff,sfp";
+      i2c-bus = <&sfp_1g_i2c>;
+      los-gpios = <&cpm_gpio2 22 GPIO_ACTIVE_HIGH>;
+      mod-def0-gpios = <&cpm_gpio2 21 GPIO_ACTIVE_LOW>;
+      maximum-power-milliwatt = <1000>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&cpm_sfp_1g_pins &cps_sfp_1g_pins>;
+      tx-disable-gpios = <&cps_gpio1 24 GPIO_ACTIVE_HIGH>;
+      tx-fault-gpios = <&cpm_gpio2 19 GPIO_ACTIVE_HIGH>;
+    };
+
+    ethernet {
+      phy-names = "comphy";
+      phys = <&cps_comphy5 0>;
+      sfp = <&sfp1>;
+    };
+
+  - | # Serdes to PHY to SFP connection
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    sfp2: sfp {
+      compatible = "sff,sfp";
+      i2c-bus = <&sfp_i2c>;
+      los-gpios = <&cps_gpio1 28 GPIO_ACTIVE_HIGH>;
+      mod-def0-gpios = <&cps_gpio1 27 GPIO_ACTIVE_LOW>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&cps_sfpp0_pins>;
+      tx-disable-gpios = <&cps_gpio1 29 GPIO_ACTIVE_HIGH>;
+      tx-fault-gpios  = <&cps_gpio1 26 GPIO_ACTIVE_HIGH>;
+    };
+
+    mdio {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      phy: ethernet-phy@0 {
+        compatible = "ethernet-phy-ieee802.3-c45";
+        pinctrl-names = "default";
+        pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>;
+        reg = <0>;
+        interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>;
+        sfp = <&sfp2>;
+      };
+    };
+
+    ethernet {
+      phy = <&phy>;
+      phy-mode = "10gbase-kr";
+    };
diff --git a/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml
new file mode 100644
index 000000000000..6df533162632
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/smsc,lan91c111.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Smart Mixed-Signal Connectivity (SMSC) LAN91C9x/91C1xx Controller
+
+maintainers:
+  - Nicolas Pitre <nico@fluxnic.net>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: smsc,lan91c111
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reg-shift: true
+
+  reg-io-width:
+    enum: [ 1, 2, 4 ]
+    default: 4
+
+  reset-gpios:
+    description: GPIO connected to control RESET pin
+    maxItems: 1
+
+  power-gpios:
+    description: GPIO connect to control PWRDWN pin
+    maxItems: 1
+
+  pxa-u16-align4:
+    description: put in place the workaround the force all u16 writes to be
+      32 bits aligned
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@4010000 {
+          compatible = "smsc,lan91c111";
+          reg = <0x40100000 0x10000>;
+          phy-mode = "mii";
+          interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+          reg-io-width = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
deleted file mode 100644
index 309e37eb7c7c..000000000000
--- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-SMSC LAN91c111 Ethernet mac
-
-Required properties:
-- compatible = "smsc,lan91c111";
-- reg : physical address and size of registers
-- interrupts : interrupt connection
-
-Optional properties:
-- phy-device : see ethernet.txt file in the same directory
-- reg-io-width : Mask of sizes (in bytes) of the IO accesses that
-  are supported on the device.  Valid value for SMSC LAN91c111 are
-  1, 2 or 4.  If it's omitted or invalid, the size would be 2 meaning
-  16-bit access only.
-- power-gpios: GPIO to control the PWRDWN pin
-- reset-gpios: GPIO to control the RESET pin
-- pxa-u16-align4 : Boolean, put in place the workaround the force all
-		   u16 writes to be 32 bits aligned
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index c115c95ee584..363b3e3ea3a6 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -4,10 +4,10 @@
 $id: http://devicetree.org/schemas/net/snps,dwmac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Synopsys DesignWare MAC Device Tree Bindings
+title: Synopsys DesignWare MAC
 
 maintainers:
-  - Alexandre Torgue <alexandre.torgue@st.com>
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
   - Giuseppe Cavallaro <peppe.cavallaro@st.com>
   - Jose Abreu <joabreu@synopsys.com>
 
@@ -30,6 +30,7 @@ select:
           - snps,dwmac-4.10a
           - snps,dwmac-4.20a
           - snps,dwmac-5.10a
+          - snps,dwmac-5.20
           - snps,dwxgmac
           - snps,dwxgmac-2.10
 
@@ -50,23 +51,26 @@ properties:
         - allwinner,sun7i-a20-gmac
         - allwinner,sun8i-a83t-emac
         - allwinner,sun8i-h3-emac
-        - allwinner,sun8i-r40-emac
+        - allwinner,sun8i-r40-gmac
         - allwinner,sun8i-v3s-emac
         - allwinner,sun50i-a64-emac
-        - loongson,ls2k-dwmac
-        - loongson,ls7a-dwmac
         - amlogic,meson6-dwmac
         - amlogic,meson8b-dwmac
         - amlogic,meson8m2-dwmac
         - amlogic,meson-gxbb-dwmac
         - amlogic,meson-axg-dwmac
-        - loongson,ls2k-dwmac
-        - loongson,ls7a-dwmac
         - ingenic,jz4775-mac
         - ingenic,x1000-mac
         - ingenic,x1600-mac
         - ingenic,x1830-mac
         - ingenic,x2000-mac
+        - loongson,ls2k-dwmac
+        - loongson,ls7a-dwmac
+        - qcom,qcs404-ethqos
+        - qcom,sc8280xp-ethqos
+        - qcom,sm8150-ethqos
+        - renesas,r9a06g032-gmac
+        - renesas,rzn1-gmac
         - rockchip,px30-gmac
         - rockchip,rk3128-gmac
         - rockchip,rk3228-gmac
@@ -74,6 +78,7 @@ properties:
         - rockchip,rk3328-gmac
         - rockchip,rk3366-gmac
         - rockchip,rk3368-gmac
+        - rockchip,rk3588-gmac
         - rockchip,rk3399-gmac
         - rockchip,rv1108-gmac
         - snps,dwmac
@@ -86,8 +91,10 @@ properties:
         - snps,dwmac-4.10a
         - snps,dwmac-4.20a
         - snps,dwmac-5.10a
+        - snps,dwmac-5.20
         - snps,dwxgmac
         - snps,dwxgmac-2.10
+        - starfive,jh7110-dwmac
 
   reg:
     minItems: 1
@@ -104,7 +111,7 @@ properties:
     minItems: 1
     items:
       - const: macirq
-      - const: eth_wake_irq
+      - enum: [eth_wake_irq, eth_lpi]
       - const: eth_lpi
 
   clocks:
@@ -130,12 +137,19 @@ properties:
         - ptp_ref
 
   resets:
-    maxItems: 1
-    description:
-      MAC Reset signal.
+    minItems: 1
+    items:
+      - description: GMAC stmmaceth reset
+      - description: AHB reset
 
   reset-names:
-    const: stmmaceth
+    minItems: 1
+    items:
+      - const: stmmaceth
+      - const: ahb
+
+  power-domains:
+    maxItems: 1
 
   mac-mode:
     $ref: ethernet-controller.yaml#/properties/phy-connection-type
@@ -163,56 +177,238 @@ properties:
   snps,mtl-rx-config:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Multiple RX Queues parameters. Phandle to a node that can
-      contain the following properties
-        * snps,rx-queues-to-use, number of RX queues to be used in the
-          driver
-        * Choose one of these RX scheduling algorithms
-          * snps,rx-sched-sp, Strict priority
-          * snps,rx-sched-wsp, Weighted Strict priority
-        * For each RX queue
-          * Choose one of these modes
-            * snps,dcb-algorithm, Queue to be enabled as DCB
-            * snps,avb-algorithm, Queue to be enabled as AVB
-          * snps,map-to-dma-channel, Channel to map
-          * Specifiy specific packet routing
-            * snps,route-avcp, AV Untagged Control packets
-            * snps,route-ptp, PTP Packets
-            * snps,route-dcbcp, DCB Control Packets
-            * snps,route-up, Untagged Packets
-            * snps,route-multi-broad, Multicast & Broadcast Packets
-          * snps,priority, bitmask of the tagged frames priorities assigned to
-            the queue
+      Multiple RX Queues parameters. Phandle to a node that
+      implements the 'rx-queues-config' object described in
+      this binding.
+
+  rx-queues-config:
+    type: object
+    properties:
+      snps,rx-queues-to-use:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: number of RX queues to be used in the driver
+      snps,rx-sched-sp:
+        type: boolean
+        description: Strict priority
+      snps,rx-sched-wsp:
+        type: boolean
+        description: Weighted Strict priority
+    allOf:
+      - if:
+          required:
+            - snps,rx-sched-sp
+        then:
+          properties:
+            snps,rx-sched-wsp: false
+      - if:
+          required:
+            - snps,rx-sched-wsp
+        then:
+          properties:
+            snps,rx-sched-sp: false
+    patternProperties:
+      "^queue[0-9]$":
+        description: Each subnode represents a queue.
+        type: object
+        properties:
+          snps,dcb-algorithm:
+            type: boolean
+            description: Queue to be enabled as DCB
+          snps,avb-algorithm:
+            type: boolean
+            description: Queue to be enabled as AVB
+          snps,map-to-dma-channel:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: DMA channel id to map
+          snps,route-avcp:
+            type: boolean
+            description: AV Untagged Control packets
+          snps,route-ptp:
+            type: boolean
+            description: PTP Packets
+          snps,route-dcbcp:
+            type: boolean
+            description: DCB Control Packets
+          snps,route-up:
+            type: boolean
+            description: Untagged Packets
+          snps,route-multi-broad:
+            type: boolean
+            description: Multicast & Broadcast Packets
+          snps,priority:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: Bitmask of the tagged frames priorities assigned to the queue
+        allOf:
+          - if:
+              required:
+                - snps,dcb-algorithm
+            then:
+              properties:
+                snps,avb-algorithm: false
+          - if:
+              required:
+                - snps,avb-algorithm
+            then:
+              properties:
+                snps,dcb-algorithm: false
+          - if:
+              required:
+                - snps,route-avcp
+            then:
+              properties:
+                snps,route-ptp: false
+                snps,route-dcbcp: false
+                snps,route-up: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-ptp
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-dcbcp: false
+                snps,route-up: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-dcbcp
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-ptp: false
+                snps,route-up: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-up
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-ptp: false
+                snps,route-dcbcp: false
+                snps,route-multi-broad: false
+          - if:
+              required:
+                - snps,route-multi-broad
+            then:
+              properties:
+                snps,route-avcp: false
+                snps,route-ptp: false
+                snps,route-dcbcp: false
+                snps,route-up: false
+        additionalProperties: false
+    additionalProperties: false
 
   snps,mtl-tx-config:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      Multiple TX Queues parameters. Phandle to a node that can
-      contain the following properties
-        * snps,tx-queues-to-use, number of TX queues to be used in the
-          driver
-        * Choose one of these TX scheduling algorithms
-          * snps,tx-sched-wrr, Weighted Round Robin
-          * snps,tx-sched-wfq, Weighted Fair Queuing
-          * snps,tx-sched-dwrr, Deficit Weighted Round Robin
-          * snps,tx-sched-sp, Strict priority
-        * For each TX queue
-          * snps,weight, TX queue weight (if using a DCB weight
-            algorithm)
-          * Choose one of these modes
-            * snps,dcb-algorithm, TX queue will be working in DCB
-            * snps,avb-algorithm, TX queue will be working in AVB
-              [Attention] Queue 0 is reserved for legacy traffic
-                          and so no AVB is available in this queue.
-          * Configure Credit Base Shaper (if AVB Mode selected)
-            * snps,send_slope, enable Low Power Interface
-            * snps,idle_slope, unlock on WoL
-            * snps,high_credit, max write outstanding req. limit
-            * snps,low_credit, max read outstanding req. limit
-          * snps,priority, bitmask of the priorities assigned to the queue.
-            When a PFC frame is received with priorities matching the bitmask,
-            the queue is blocked from transmitting for the pause time specified
-            in the PFC frame.
+      Multiple TX Queues parameters. Phandle to a node that
+      implements the 'tx-queues-config' object described in
+      this binding.
+
+  tx-queues-config:
+    type: object
+    properties:
+      snps,tx-queues-to-use:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: number of TX queues to be used in the driver
+      snps,tx-sched-wrr:
+        type: boolean
+        description: Weighted Round Robin
+      snps,tx-sched-wfq:
+        type: boolean
+        description: Weighted Fair Queuing
+      snps,tx-sched-dwrr:
+        type: boolean
+        description: Deficit Weighted Round Robin
+      snps,tx-sched-sp:
+        type: boolean
+        description: Strict priority
+    allOf:
+      - if:
+          required:
+            - snps,tx-sched-wrr
+        then:
+          properties:
+            snps,tx-sched-wfq: false
+            snps,tx-sched-dwrr: false
+            snps,tx-sched-sp: false
+      - if:
+          required:
+            - snps,tx-sched-wfq
+        then:
+          properties:
+            snps,tx-sched-wrr: false
+            snps,tx-sched-dwrr: false
+            snps,tx-sched-sp: false
+      - if:
+          required:
+            - snps,tx-sched-dwrr
+        then:
+          properties:
+            snps,tx-sched-wrr: false
+            snps,tx-sched-wfq: false
+            snps,tx-sched-sp: false
+      - if:
+          required:
+            - snps,tx-sched-sp
+        then:
+          properties:
+            snps,tx-sched-wrr: false
+            snps,tx-sched-wfq: false
+            snps,tx-sched-dwrr: false
+    patternProperties:
+      "^queue[0-9]$":
+        description: Each subnode represents a queue.
+        type: object
+        properties:
+          snps,weight:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: TX queue weight (if using a DCB weight algorithm)
+          snps,dcb-algorithm:
+            type: boolean
+            description: TX queue will be working in DCB
+          snps,avb-algorithm:
+            type: boolean
+            description:
+              TX queue will be working in AVB.
+              Queue 0 is reserved for legacy traffic and so no AVB is
+              available in this queue.
+          snps,send_slope:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: enable Low Power Interface
+          snps,idle_slope:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: unlock on WoL
+          snps,high_credit:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: max write outstanding req. limit
+          snps,low_credit:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description: max read outstanding req. limit
+          snps,priority:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            description:
+              Bitmask of the tagged frames priorities assigned to the queue.
+              When a PFC frame is received with priorities matching the bitmask,
+              the queue is blocked from transmitting for the pause time specified
+              in the PFC frame.
+        allOf:
+          - if:
+              required:
+                - snps,dcb-algorithm
+            then:
+              properties:
+                snps,avb-algorithm: false
+          - if:
+              required:
+                - snps,avb-algorithm
+            then:
+              properties:
+                snps,dcb-algorithm: false
+                snps,weight: false
+        additionalProperties: false
+    additionalProperties: false
 
   snps,reset-gpio:
     deprecated: true
@@ -285,8 +481,14 @@ properties:
       is supported. For example, this is used in case of SGMII and
       MAC2MAC connection.
 
+  snps,clk-csr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Frequency division factor for MDC clock.
+
   mdio:
-    type: object
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
     description:
       Creates and registers an MDIO bus.
 
@@ -297,6 +499,60 @@ properties:
     required:
       - compatible
 
+  stmmac-axi-config:
+    type: object
+    unevaluatedProperties: false
+    description:
+      AXI BUS Mode parameters.
+
+    properties:
+      snps,lpi_en:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          enable Low Power Interface
+
+      snps,xit_frm:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          unlock on WoL
+
+      snps,wr_osr_lmt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          max write outstanding req. limit
+
+      snps,rd_osr_lmt:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          max read outstanding req. limit
+
+      snps,kbbe:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          do not cross 1KiB boundary.
+
+      snps,blen:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description:
+          this is a vector of supported burst length.
+        minItems: 7
+        maxItems: 7
+
+      snps,fb:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          fixed-burst
+
+      snps,mb:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          mixed-burst
+
+      snps,rb:
+        $ref: /schemas/types.yaml#/definitions/flag
+        description:
+          rebuild INCRx Burst
+
 required:
   - compatible
   - reg
@@ -306,10 +562,10 @@ required:
 
 dependencies:
   snps,reset-active-low: ["snps,reset-gpio"]
-  snps,reset-delay-us: ["snps,reset-gpio"]
+  snps,reset-delays-us: ["snps,reset-gpio"]
 
 allOf:
-  - $ref: "ethernet-controller.yaml#"
+  - $ref: ethernet-controller.yaml#
   - if:
       properties:
         compatible:
@@ -318,7 +574,7 @@ allOf:
               - allwinner,sun7i-a20-gmac
               - allwinner,sun8i-a83t-emac
               - allwinner,sun8i-h3-emac
-              - allwinner,sun8i-r40-emac
+              - allwinner,sun8i-r40-gmac
               - allwinner,sun8i-v3s-emac
               - allwinner,sun50i-a64-emac
               - ingenic,jz4775-mac
@@ -326,6 +582,11 @@ allOf:
               - ingenic,x1600-mac
               - ingenic,x1830-mac
               - ingenic,x2000-mac
+              - qcom,sc8280xp-ethqos
+              - snps,dwmac-3.50a
+              - snps,dwmac-4.10a
+              - snps,dwmac-4.20a
+              - snps,dwmac-5.20
               - snps,dwxgmac
               - snps,dwxgmac-2.10
               - st,spear600-gmac
@@ -336,21 +597,21 @@ allOf:
           description:
             Programmable Burst Length (tx and rx)
           $ref: /schemas/types.yaml#/definitions/uint32
-          enum: [2, 4, 8]
+          enum: [1, 2, 4, 8, 16, 32]
 
         snps,txpbl:
           description:
             Tx Programmable Burst Length. If set, DMA tx will use this
             value rather than snps,pbl.
           $ref: /schemas/types.yaml#/definitions/uint32
-          enum: [2, 4, 8]
+          enum: [1, 2, 4, 8, 16, 32]
 
         snps,rxpbl:
           description:
             Rx Programmable Burst Length. If set, DMA rx will use this
             value rather than snps,pbl.
           $ref: /schemas/types.yaml#/definitions/uint32
-          enum: [2, 4, 8]
+          enum: [1, 2, 4, 8, 16, 32]
 
         snps,no-pbl-x8:
           $ref: /schemas/types.yaml#/definitions/flag
@@ -366,7 +627,7 @@ allOf:
               - allwinner,sun7i-a20-gmac
               - allwinner,sun8i-a83t-emac
               - allwinner,sun8i-h3-emac
-              - allwinner,sun8i-r40-emac
+              - allwinner,sun8i-r40-gmac
               - allwinner,sun8i-v3s-emac
               - allwinner,sun50i-a64-emac
               - loongson,ls2k-dwmac
@@ -376,10 +637,14 @@ allOf:
               - ingenic,x1600-mac
               - ingenic,x1830-mac
               - ingenic,x2000-mac
+              - qcom,qcs404-ethqos
+              - qcom,sc8280xp-ethqos
+              - qcom,sm8150-ethqos
               - snps,dwmac-4.00
               - snps,dwmac-4.10a
               - snps,dwmac-4.20a
               - snps,dwmac-5.10a
+              - snps,dwmac-5.20
               - snps,dwxgmac
               - snps,dwxgmac-2.10
               - st,spear600-gmac
@@ -396,41 +661,6 @@ additionalProperties: true
 
 examples:
   - |
-    stmmac_axi_setup: stmmac-axi-config {
-        snps,wr_osr_lmt = <0xf>;
-        snps,rd_osr_lmt = <0xf>;
-        snps,blen = <256 128 64 32 0 0 0>;
-    };
-
-    mtl_rx_setup: rx-queues-config {
-        snps,rx-queues-to-use = <1>;
-        snps,rx-sched-sp;
-        queue0 {
-            snps,dcb-algorithm;
-            snps,map-to-dma-channel = <0x0>;
-            snps,priority = <0x0>;
-        };
-    };
-
-    mtl_tx_setup: tx-queues-config {
-        snps,tx-queues-to-use = <2>;
-        snps,tx-sched-wrr;
-        queue0 {
-            snps,weight = <0x10>;
-            snps,dcb-algorithm;
-            snps,priority = <0x0>;
-        };
-
-        queue1 {
-            snps,avb-algorithm;
-            snps,send_slope = <0x1000>;
-            snps,idle_slope = <0x1000>;
-            snps,high_credit = <0x3E800>;
-            snps,low_credit = <0xFFC18000>;
-            snps,priority = <0x1>;
-        };
-    };
-
     gmac0: ethernet@e0800000 {
         compatible = "snps,dwxgmac-2.10", "snps,dwxgmac";
         reg = <0xe0800000 0x8000>;
@@ -449,6 +679,42 @@ examples:
         snps,axi-config = <&stmmac_axi_setup>;
         snps,mtl-rx-config = <&mtl_rx_setup>;
         snps,mtl-tx-config = <&mtl_tx_setup>;
+
+        stmmac_axi_setup: stmmac-axi-config {
+            snps,wr_osr_lmt = <0xf>;
+            snps,rd_osr_lmt = <0xf>;
+            snps,blen = <256 128 64 32 0 0 0>;
+        };
+
+        mtl_rx_setup: rx-queues-config {
+            snps,rx-queues-to-use = <1>;
+            snps,rx-sched-sp;
+            queue0 {
+                snps,dcb-algorithm;
+                snps,map-to-dma-channel = <0x0>;
+                snps,priority = <0x0>;
+            };
+        };
+
+        mtl_tx_setup: tx-queues-config {
+            snps,tx-queues-to-use = <2>;
+            snps,tx-sched-wrr;
+            queue0 {
+                snps,weight = <0x10>;
+                snps,dcb-algorithm;
+                snps,priority = <0x0>;
+            };
+
+            queue1 {
+                snps,avb-algorithm;
+                snps,send_slope = <0x1000>;
+                snps,idle_slope = <0x1000>;
+                snps,high_credit = <0x3E800>;
+                snps,low_credit = <0xFFC18000>;
+                snps,priority = <0x1>;
+            };
+        };
+
         mdio0 {
             #address-cells = <1>;
             #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/socionext,synquacer-netsec.yaml b/Documentation/devicetree/bindings/net/socionext,synquacer-netsec.yaml
new file mode 100644
index 000000000000..a65e6aa215a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/socionext,synquacer-netsec.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/socionext,synquacer-netsec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext NetSec Ethernet Controller IP
+
+maintainers:
+  - Jassi Brar <jaswinder.singh@linaro.org>
+  - Ilias Apalodimas <ilias.apalodimas@linaro.org>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: socionext,synquacer-netsec
+
+  reg:
+    items:
+      - description: control register area
+      - description: EEPROM holding the MAC address and microengine firmware
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: phy_ref_clk
+
+  dma-coherent: true
+
+  interrupts:
+    maxItems: 1
+
+  mdio:
+    $ref: mdio.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - mdio
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@522d0000 {
+        compatible = "socionext,synquacer-netsec";
+        reg = <0x522d0000 0x10000>, <0x10000000 0x10000>;
+        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk_netsec>;
+        clock-names = "phy_ref_clk";
+        phy-mode = "rgmii";
+        max-speed = <1000>;
+        max-frame-size = <9000>;
+        phy-handle = <&phy1>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            phy1: ethernet-phy@1 {
+                compatible = "ethernet-phy-ieee802.3-c22";
+                reg = <1>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
index 8a03a24a2019..b0ebcef6801c 100644
--- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
+++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
@@ -13,9 +13,6 @@ description: |
   This describes the devicetree bindings for AVE ethernet controller
   implemented on Socionext UniPhier SoCs.
 
-allOf:
-  - $ref: ethernet-controller.yaml#
-
 properties:
   compatible:
     enum:
@@ -24,6 +21,7 @@ properties:
       - socionext,uniphier-ld11-ave4
       - socionext,uniphier-ld20-ave4
       - socionext,uniphier-pxs3-ave4
+      - socionext,uniphier-nx1-ave4
 
   reg:
     maxItems: 1
@@ -43,34 +41,63 @@ properties:
     minItems: 1
     maxItems: 4
 
-  clock-names:
-    oneOf:
-      - items:          # for Pro4
-          - const: gio
-          - const: ether
-          - const: ether-gb
-          - const: ether-phy
-      - const: ether    # for others
+  clock-names: true
 
   resets:
     minItems: 1
     maxItems: 2
 
-  reset-names:
-    oneOf:
-      - items:          # for Pro4
-          - const: gio
-          - const: ether
-      - const: ether    # for others
+  reset-names: true
 
   socionext,syscon-phy-mode:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscon that configures phy mode
+          - description: ID of MAC instance
     description:
       A phandle to syscon with one argument that configures phy mode.
       The argument is the ID of MAC instance.
 
   mdio:
     $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro4-ave4
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: gio
+            - const: ether
+            - const: ether-gb
+            - const: ether-phy
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: ether
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: ether
+        resets:
+          maxItems: 1
+        reset-names:
+          const: ether
 
 required:
   - compatible
@@ -84,7 +111,7 @@ required:
   - reset-names
   - mdio
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/net/socionext-netsec.txt b/Documentation/devicetree/bindings/net/socionext-netsec.txt
deleted file mode 100644
index a3c1dffaa4bb..000000000000
--- a/Documentation/devicetree/bindings/net/socionext-netsec.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Socionext NetSec Ethernet Controller IP
-
-Required properties:
-- compatible: Should be "socionext,synquacer-netsec"
-- reg: Address and length of the control register area, followed by the
-       address and length of the EEPROM holding the MAC address and
-       microengine firmware
-- interrupts: Should contain ethernet controller interrupt
-- clocks: phandle to the PHY reference clock
-- clock-names: Should be "phy_ref_clk"
-- phy-mode: See ethernet.txt file in the same directory
-- phy-handle: See ethernet.txt in the same directory.
-
-- mdio device tree subnode: When the Netsec has a phy connected to its local
-		mdio, there must be device tree subnode with the following
-		required properties:
-
-	- #address-cells: Must be <1>.
-	- #size-cells: Must be <0>.
-
-	For each phy on the mdio bus, there must be a node with the following
-	fields:
-	- compatible: Refer to phy.txt
-	- reg: phy id used to communicate to phy.
-
-Optional properties: (See ethernet.txt file in the same directory)
-- dma-coherent: Boolean property, must only be present if memory
-	accesses performed by the device are cache coherent.
-- max-speed: See ethernet.txt in the same directory.
-- max-frame-size: See ethernet.txt in the same directory.
-
-The MAC address will be determined using the optional properties
-defined in ethernet.txt. The 'phy-mode' property is required, but may
-be set to the empty string if the PHY configuration is programmed by
-the firmware or set by hardware straps, and needs to be preserved.
-
-Example:
-	eth0: ethernet@522d0000 {
-		compatible = "socionext,synquacer-netsec";
-		reg = <0 0x522d0000 0x0 0x10000>, <0 0x10000000 0x0 0x10000>;
-		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clk_netsec>;
-		clock-names = "phy_ref_clk";
-		phy-mode = "rgmii";
-		max-speed = <1000>;
-		max-frame-size = <9000>;
-		phy-handle = <&phy1>;
-
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			phy1: ethernet-phy@1 {
-				compatible = "ethernet-phy-ieee802.3-c22";
-				reg = <1>;
-			};
-		};
diff --git a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
new file mode 100644
index 000000000000..5e7cfbbebce6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 StarFive Technology Co., Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/starfive,jh7110-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 DWMAC glue layer
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+  - Samin Guo <samin.guo@starfivetech.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - starfive,jh7110-dwmac
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - starfive,jh7110-dwmac
+      - const: snps,dwmac-5.20
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: GMAC main clock
+      - description: GMAC AHB clock
+      - description: PTP clock
+      - description: TX clock
+      - description: GTX clock
+
+  clock-names:
+    items:
+      - const: stmmaceth
+      - const: pclk
+      - const: ptp_ref
+      - const: tx
+      - const: gtx
+
+  interrupts:
+    minItems: 3
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 3
+    maxItems: 3
+
+  resets:
+    items:
+      - description: MAC Reset signal.
+      - description: AHB Reset signal.
+
+  reset-names:
+    items:
+      - const: stmmaceth
+      - const: ahb
+
+  starfive,tx-use-rgmii-clk:
+    description:
+      Tx clock is provided by external rgmii clock.
+    type: boolean
+
+  starfive,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscon that configures phy mode
+          - description: Offset of phy mode selection
+          - description: Shift of phy mode selection
+    description:
+      A phandle to syscon with two arguments that configure phy mode.
+      The argument one is the offset of phy mode selection, the
+      argument two is the shift of phy mode selection.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - resets
+  - reset-names
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@16030000 {
+        compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20";
+        reg = <0x16030000 0x10000>;
+        clocks = <&clk 3>, <&clk 2>, <&clk 109>,
+                 <&clk 6>, <&clk 111>;
+        clock-names = "stmmaceth", "pclk", "ptp_ref",
+                      "tx", "gtx";
+        resets = <&rst 1>, <&rst 2>;
+        reset-names = "stmmaceth", "ahb";
+        interrupts = <7>, <6>, <5>;
+        interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+        phy-mode = "rgmii-id";
+        snps,multicast-filter-bins = <64>;
+        snps,perfect-filter-entries = <8>;
+        rx-fifo-depth = <2048>;
+        tx-fifo-depth = <2048>;
+        snps,fixed-burst;
+        snps,no-pbl-x8;
+        snps,tso;
+        snps,force_thresh_dma_mode;
+        snps,axi-config = <&stmmac_axi_setup>;
+        snps,en-tx-lpi-clockgating;
+        snps,txpbl = <16>;
+        snps,rxpbl = <16>;
+        starfive,syscon = <&aon_syscon 0xc 0x12>;
+        phy-handle = <&phy0>;
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "snps,dwmac-mdio";
+
+            phy0: ethernet-phy@0 {
+                reg = <0>;
+            };
+        };
+
+        stmmac_axi_setup: stmmac-axi-config {
+            snps,lpi_en;
+            snps,wr_osr_lmt = <4>;
+            snps,rd_osr_lmt = <4>;
+            snps,blen = <256 128 64 32 0 0 0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt
index 062c5174add3..42cd075456ab 100644
--- a/Documentation/devicetree/bindings/net/sti-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt
@@ -7,8 +7,7 @@ and what is needed on STi platforms to program the stmmac glue logic.
 The device node has following properties.
 
 Required properties:
- - compatible	: Can be "st,stih415-dwmac", "st,stih416-dwmac",
-   "st,stih407-dwmac", "st,stid127-dwmac".
+ - compatible	: "st,stih407-dwmac"
  - st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
    encompases the glue register, and the offset of the control register.
  - st,gmac_en: this is to enable the gmac into a dedicated sysctl control
diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
index d3f05d5934d5..fc8c96b08d7d 100644
--- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
@@ -2,14 +2,14 @@
 # Copyright 2019 BayLibre, SAS
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/net/stm32-dwmac.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/stm32-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: STMicroelectronics STM32 / MCU DWMAC glue layer controller
 
 maintainers:
-  - Alexandre Torgue <alexandre.torgue@st.com>
-  - Christophe Roullier <christophe.roullier@st.com>
+  - Alexandre Torgue <alexandre.torgue@foss.st.com>
+  - Christophe Roullier <christophe.roullier@foss.st.com>
 
 description:
   This file documents platform glue layer for stmmac.
@@ -26,7 +26,7 @@ select:
     - compatible
 
 allOf:
-  - $ref: "snps,dwmac.yaml#"
+  - $ref: snps,dwmac.yaml#
 
 properties:
   compatible:
@@ -44,6 +44,12 @@ properties:
               - st,stm32-dwmac
           - const: snps,dwmac-3.50a
 
+  reg: true
+
+  reg-names:
+    items:
+      - const: stmmaceth
+
   clocks:
     minItems: 3
     items:
@@ -67,7 +73,11 @@ properties:
         - ptp_ref
 
   st,syscon:
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the syscon node which encompases the glue register
+          - description: offset of the control register
     description:
       Should be phandle/offset pair. The phandle to the syscon node which
       encompases the glue register, and the offset of the control register
@@ -102,7 +112,7 @@ examples:
            compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
            reg = <0x5800a000 0x2000>;
            reg-names = "stmmaceth";
-           interrupts = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+           interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
            interrupt-names = "macirq";
            clock-names = "stmmaceth",
                      "mac-clk-tx",
@@ -121,6 +131,7 @@ examples:
            phy-mode = "rgmii";
        };
 
+  - |
     //Example 2 (MCU example)
      ethernet1: ethernet@40028000 {
            compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
@@ -136,6 +147,7 @@ examples:
            phy-mode = "mii";
        };
 
+  - |
     //Example 3
      ethernet2: ethernet@40027000 {
            compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
diff --git a/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml
new file mode 100644
index 000000000000..5b130097449b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/sunplus,sp7021-emac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Dual Ethernet MAC
+
+maintainers:
+  - Wells Lu <wellslutw@gmail.com>
+
+description: |
+  Sunplus SP7021 dual 10M/100M Ethernet MAC controller.
+  Device node of the controller has following properties.
+
+properties:
+  compatible:
+    const: sunplus,sp7021-emac
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  ethernet-ports:
+    type: object
+    additionalProperties: false
+    description: Ethernet ports to PHY
+
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^port@[0-1]$":
+        type: object
+        additionalProperties: false
+        description: Port to PHY
+
+        properties:
+          reg:
+            minimum: 0
+            maximum: 1
+
+          phy-handle:
+            maxItems: 1
+
+          phy-mode:
+            maxItems: 1
+
+          nvmem-cells:
+            items:
+              - description: nvmem cell address of MAC address
+
+          nvmem-cell-names:
+            description: names corresponding to the nvmem cells
+            items:
+              - const: mac-address
+
+        required:
+          - reg
+          - phy-handle
+          - phy-mode
+          - nvmem-cells
+          - nvmem-cell-names
+
+  mdio:
+    $ref: mdio.yaml#
+    unevaluatedProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+  - pinctrl-0
+  - pinctrl-names
+  - ethernet-ports
+  - mdio
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    ethernet@9c108000 {
+        compatible = "sunplus,sp7021-emac";
+        reg = <0x9c108000 0x400>;
+        interrupt-parent = <&intc>;
+        interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clkc 0xa7>;
+        resets = <&rstc 0x97>;
+        pinctrl-0 = <&emac_demo_board_v3_pins>;
+        pinctrl-names = "default";
+
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                phy-handle = <&eth_phy0>;
+                phy-mode = "rmii";
+                nvmem-cells = <&mac_addr0>;
+                nvmem-cell-names = "mac-address";
+            };
+
+            port@1 {
+                reg = <1>;
+                phy-handle = <&eth_phy1>;
+                phy-mode = "rmii";
+                nvmem-cells = <&mac_addr1>;
+                nvmem-cell-names = "mac-address";
+            };
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            eth_phy0: ethernet-phy@0 {
+                reg = <0>;
+            };
+
+            eth_phy1: ethernet-phy@1 {
+                reg = <1>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/ti,bluetooth.yaml b/Documentation/devicetree/bindings/net/ti,bluetooth.yaml
new file mode 100644
index 000000000000..81616f9fb493
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ti,bluetooth.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ti,bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Bluetooth Chips
+
+maintainers:
+  - David Lechner <david@lechnology.com>
+
+description: |
+  This documents the binding structure and common properties for serial
+  attached TI Bluetooth devices. The following chips are included in this
+  binding:
+
+  * TI CC256x Bluetooth devices
+  * TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
+
+  TI WiLink devices have a UART interface for providing Bluetooth, FM radio,
+  and GPS over what's called "shared transport". The shared transport is
+  standard BT HCI protocol with additional channels for the other functions.
+
+  TI WiLink devices also have a separate WiFi interface as described in
+  wireless/ti,wlcore.yaml.
+
+  This bindings follows the UART slave device binding in ../serial/serial.yaml.
+
+properties:
+  compatible:
+    enum:
+      - ti,cc2560
+      - ti,wl1271-st
+      - ti,wl1273-st
+      - ti,wl1281-st
+      - ti,wl1283-st
+      - ti,wl1285-st
+      - ti,wl1801-st
+      - ti,wl1805-st
+      - ti,wl1807-st
+      - ti,wl1831-st
+      - ti,wl1835-st
+      - ti,wl1837-st
+
+  enable-gpios:
+    maxItems: 1
+
+  vio-supply:
+    description: Vio input supply (1.8V)
+
+  vbat-supply:
+    description: Vbat input supply (2.9-4.8V)
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ext_clock
+
+  max-speed:
+    default: 3000000
+
+  nvmem-cells:
+    maxItems: 1
+    description:
+      Nvmem data cell that contains a 6 byte BD address with the most
+      significant byte first (big-endian).
+
+  nvmem-cell-names:
+    items:
+      - const: bd-address
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    serial {
+            bluetooth {
+                    compatible = "ti,wl1835-st";
+                    enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+                    clocks = <&clk32k_wl18xx>;
+                    clock-names = "ext_clock";
+                    nvmem-cells = <&bd_address>;
+                    nvmem-cell-names = "bd-address";
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index 07a00f53adbf..b04ac4966608 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/ti,cpsw-switch.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: TI SoC Ethernet Switch Controller (CPSW) Device Tree Bindings
+title: TI SoC Ethernet Switch Controller (CPSW)
 
 maintainers:
   - Grygorii Strashko <grygorii.strashko@ti.com>
@@ -62,10 +62,10 @@ properties:
 
   interrupt-names:
     items:
-      - const: "rx_thresh"
-      - const: "rx"
-      - const: "tx"
-      - const: "misc"
+      - const: rx_thresh
+      - const: rx
+      - const: tx
+      - const: misc
 
   pinctrl-names: true
 
@@ -77,6 +77,8 @@ properties:
 
   ethernet-ports:
     type: object
+    additionalProperties: false
+
     properties:
       '#address-cells':
         const: 1
@@ -88,8 +90,8 @@ properties:
         type: object
         description: CPSW external ports
 
-        allOf:
-          - $ref: ethernet-controller.yaml#
+        $ref: ethernet-controller.yaml#
+        unevaluatedProperties: false
 
         properties:
           reg:
@@ -118,6 +120,7 @@ properties:
 
   cpts:
     type: object
+    unevaluatedProperties: false
     description:
       The Common Platform Time Sync (CPTS) module
 
@@ -151,7 +154,7 @@ patternProperties:
     type: object
     description:
       CPSW MDIO bus.
-    $ref: "ti,davinci-mdio.yaml#"
+    $ref: ti,davinci-mdio.yaml#
 
 
 required:
diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
index 5728fe23f530..53604fab0b73 100644
--- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
@@ -13,7 +13,7 @@ description:
   TI SoC Davinci/Keystone2 MDIO Controller
 
 allOf:
-  - $ref: "mdio.yaml#"
+  - $ref: mdio.yaml#
 
 properties:
   compatible:
@@ -34,9 +34,17 @@ properties:
     maxItems: 1
 
   bus_freq:
+    $ref: /schemas/types.yaml#/definitions/uint32
     maximum: 2500000
     description: MDIO Bus frequency
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: fck
+
   ti,hwmods:
     description: TI hwmod name
     deprecated: true
@@ -49,6 +57,7 @@ if:
     compatible:
       contains:
         const: ti,davinci_mdio
+then:
   required:
     - bus_freq
 
diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
index 75e8712e903a..db74474207ed 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83822.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
@@ -2,13 +2,13 @@
 # Copyright (C) 2020 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/net/ti,dp83822.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/ti,dp83822.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TI DP83822 ethernet PHY
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   The DP83822 is a low-power, single-port, 10/100 Mbps Ethernet PHY. It
@@ -21,7 +21,7 @@ description: |
     http://www.ti.com/lit/ds/symlink/dp83822i.pdf
 
 allOf:
-  - $ref: "ethernet-phy.yaml#"
+  - $ref: ethernet-phy.yaml#
 
 properties:
   reg:
diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.yaml b/Documentation/devicetree/bindings/net/ti,dp83867.yaml
index 047d757e8d82..4bc1f98fd9fe 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.yaml
@@ -2,16 +2,16 @@
 # Copyright (C) 2019 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/net/ti,dp83867.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/ti,dp83867.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TI DP83867 ethernet PHY
 
 allOf:
-  - $ref: "ethernet-controller.yaml#"
+  - $ref: ethernet-controller.yaml#
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   The DP83867 device is a robust, low power, fully featured Physical Layer
@@ -31,6 +31,16 @@ properties:
   reg:
     maxItems: 1
 
+  nvmem-cells:
+    maxItems: 1
+    description:
+      Nvmem data cell containing the value to write to the
+      IO_IMPEDANCE_CTRL field of the IO_MUX_CFG register.
+
+  nvmem-cell-names:
+    items:
+      - const: io_impedance_ctrl
+
   ti,min-output-impedance:
     type: boolean
     description: |
@@ -42,9 +52,11 @@ properties:
     description: |
       MAC Interface Impedance control to set the programmable output impedance
       to a maximum value (70 ohms).
-      Note: ti,min-output-impedance and ti,max-output-impedance are mutually
-        exclusive. When both properties are present ti,max-output-impedance
-        takes precedence.
+      Note: Specifying an io_impedance_ctrl nvmem cell or one of the
+        ti,min-output-impedance, ti,max-output-impedance properties
+        are mutually exclusive. If more than one is present, an nvmem
+        cell takes precedence over ti,max-output-impedance, which in
+        turn takes precedence over ti,min-output-impedance.
 
   tx-fifo-depth:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
index 70a1209cb13b..fb6725df4668 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83869.yaml
+++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml
@@ -2,16 +2,16 @@
 # Copyright (C) 2019 Texas Instruments Incorporated
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/net/ti,dp83869.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/ti,dp83869.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TI DP83869 ethernet PHY
 
 allOf:
-  - $ref: "ethernet-phy.yaml#"
+  - $ref: ethernet-phy.yaml#
 
 maintainers:
-  - Dan Murphy <dmurphy@ti.com>
+  - Andrew Davis <afd@ti.com>
 
 description: |
   The DP83869HM device is a robust, fully-featured Gigabit (PHY) transceiver
@@ -92,7 +92,7 @@ examples:
         tx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
         rx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
         ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>;
-        ti,max-output-impedance = "true";
+        ti,max-output-impedance;
         ti,clk-output-sel = <DP83869_CLK_O_SEL_CHN_A_RCLK>;
         rx-internal-delay-ps = <2000>;
         tx-internal-delay-ps = <2000>;
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
index 4b97a0f1175b..395a4650e285 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/ti,k3-am654-cpsw-nuss.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller) Device Tree Bindings
+title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller)
 
 maintainers:
   - Grygorii Strashko <grygorii.strashko@ti.com>
@@ -54,9 +54,12 @@ properties:
 
   compatible:
     enum:
+      - ti,am642-cpsw-nuss
       - ti,am654-cpsw-nuss
+      - ti,j7200-cpswxg-nuss
       - ti,j721e-cpsw-nuss
-      - ti,am642-cpsw-nuss
+      - ti,j721e-cpswxg-nuss
+      - ti,j784s4-cpswxg-nuss
 
   reg:
     maxItems: 1
@@ -110,21 +113,32 @@ properties:
         const: 0
 
     patternProperties:
-      port@[1-2]:
+      "^port@[1-8]$":
         type: object
         description: CPSWxG NUSS external ports
 
         $ref: ethernet-controller.yaml#
+        unevaluatedProperties: false
 
         properties:
           reg:
             minimum: 1
-            maximum: 2
+            maximum: 8
             description: CPSW port number
 
           phys:
-            maxItems: 1
-            description: phandle on phy-gmii-sel PHY
+            minItems: 1
+            items:
+              - description: CPSW MAC's PHY.
+              - description: Serdes PHY. Serdes PHY is required only if
+                             the Serdes has to be configured in the
+                             Single-Link configuration.
+
+          phy-names:
+            minItems: 1
+            items:
+              - const: mac
+              - const: serdes
 
           label:
             description: label associated with this port
@@ -136,6 +150,11 @@ properties:
 
           ti,syscon-efuse:
             $ref: /schemas/types.yaml#/definitions/phandle-array
+            items:
+              - items:
+                  - description: Phandle to the system control device node which
+                      provides access to efuse
+                  - description: offset to efuse registers???
             description:
               Phandle to the system control device node which provides access
               to efuse IO range with MAC addresses
@@ -173,11 +192,50 @@ required:
   - '#address-cells'
   - '#size-cells'
 
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ti,j721e-cpswxg-nuss
+                - ti,j784s4-cpswxg-nuss
+    then:
+      properties:
+        ethernet-ports:
+          patternProperties:
+            "^port@[5-8]$": false
+            "^port@[1-4]$":
+              properties:
+                reg:
+                  minimum: 1
+                  maximum: 4
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - ti,j7200-cpswxg-nuss
+                - ti,j721e-cpswxg-nuss
+                - ti,j784s4-cpswxg-nuss
+    then:
+      properties:
+        ethernet-ports:
+          patternProperties:
+            "^port@[3-8]$": false
+            "^port@[1-2]$":
+              properties:
+                reg:
+                  minimum: 1
+                  maximum: 2
+
 additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/pinctrl/k3.h>
     #include <dt-bindings/soc/ti,sci_pm_domain.h>
     #include <dt-bindings/net/ti-dp83867.h>
     #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
index 1a81bf70c88c..3e910d3b24a0 100644
--- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
+++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/ti,k3-am654-cpts.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module Device Tree Bindings
+title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module
 
 maintainers:
   - Grygorii Strashko <grygorii.strashko@ti.com>
@@ -93,8 +93,17 @@ properties:
     description:
       Number of timestamp Generator function outputs (TS_GENFx)
 
+  ti,pps:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+    description: |
+      The pair of HWx_TS_PUSH input and TS_GENFy output indexes used for
+      PPS events generation. Platform/board specific.
+
   refclk-mux:
     type: object
+    additionalProperties: false
     description: CPTS reference clock multiplexer clock
     properties:
       '#clock-cells':
@@ -103,12 +112,6 @@ properties:
       clocks:
         maxItems: 8
 
-      assigned-clocks:
-        maxItems: 1
-
-      assigned-clocks-parents:
-        maxItems: 1
-
     required:
       - clocks
 
@@ -148,4 +151,3 @@ examples:
                assigned-clock-parents = <&k3_clks 118 11>;
          };
     };
-
diff --git a/Documentation/devicetree/bindings/net/ti-bluetooth.txt b/Documentation/devicetree/bindings/net/ti-bluetooth.txt
deleted file mode 100644
index f48c17b38f58..000000000000
--- a/Documentation/devicetree/bindings/net/ti-bluetooth.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Texas Instruments Bluetooth Chips
----------------------------------
-
-This documents the binding structure and common properties for serial
-attached TI Bluetooth devices. The following chips are included in this
-binding:
-
-* TI CC256x Bluetooth devices
-* TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
-
-TI WiLink devices have a UART interface for providing Bluetooth, FM radio,
-and GPS over what's called "shared transport". The shared transport is
-standard BT HCI protocol with additional channels for the other functions.
-
-TI WiLink devices also have a separate WiFi interface as described in
-wireless/ti,wlcore.txt.
-
-This bindings follows the UART slave device binding in ../serial/serial.yaml.
-
-Required properties:
- - compatible: should be one of the following:
-    "ti,cc2560"
-    "ti,wl1271-st"
-    "ti,wl1273-st"
-    "ti,wl1281-st"
-    "ti,wl1283-st"
-    "ti,wl1285-st"
-    "ti,wl1801-st"
-    "ti,wl1805-st"
-    "ti,wl1807-st"
-    "ti,wl1831-st"
-    "ti,wl1835-st"
-    "ti,wl1837-st"
-
-Optional properties:
- - enable-gpios : GPIO signal controlling enabling of BT. Active high.
- - vio-supply : Vio input supply (1.8V)
- - vbat-supply : Vbat input supply (2.9-4.8V)
- - clocks : Must contain an entry, for each entry in clock-names.
-   See ../clocks/clock-bindings.txt for details.
- - clock-names : Must include the following entry:
-   "ext_clock" (External clock provided to the TI combo chip).
- - nvmem-cells: phandle to nvmem data cell that contains a 6 byte BD address
-   with the most significant byte first (big-endian).
- - nvmem-cell-names: "bd-address" (required when nvmem-cells is specified)
-
-Example:
-
-&serial0 {
-	compatible = "ns16550a";
-	...
-	bluetooth {
-		compatible = "ti,wl1835-st";
-		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		clocks = <&clk32k_wl18xx>;
-		clock-names = "ext_clock";
-		nvmem-cells = <&bd_address>;
-		nvmem-cell-names = "bd-address";
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
index 59724d18e6f3..474fa8bcf302 100644
--- a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/net/toshiba,visconti-dwmac.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/net/toshiba,visconti-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Toshiba Visconti DWMAC Ethernet controller
 
@@ -52,6 +52,7 @@ unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/toshiba,tmpv770x.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     soc {
@@ -63,7 +64,7 @@ examples:
             reg = <0 0x28000000 0 0x10000>;
             interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
             interrupt-names = "macirq";
-            clocks = <&clk300mhz>, <&clk125mhz>;
+            clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>;
             clock-names = "stmmaceth", "phy_ref_clk";
             snps,txpbl = <4>;
             snps,rxpbl = <4>;
@@ -71,7 +72,7 @@ examples:
             phy-mode = "rgmii-id";
             phy-handle = <&phy0>;
 
-            mdio0 {
+            mdio {
                 #address-cells = <0x1>;
                 #size-cells = <0x0>;
                 compatible = "snps,dwmac-mdio";
diff --git a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
new file mode 100644
index 000000000000..4158673f723c
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/vertexcom-mse102x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The Vertexcom MSE102x (SPI)
+
+maintainers:
+  - Stefan Wahren <stefan.wahren@chargebyte.com>
+
+description:
+  Vertexcom's MSE102x are a family of HomePlug GreenPHY chips.
+  They can be connected either via RGMII, RMII or SPI to a host CPU.
+
+  In order to use a MSE102x chip as SPI device, it must be defined as
+  a child of an SPI master device in the device tree.
+
+  More information can be found at
+    http://www.vertexcom.com/doc/MSE1022%20Product%20Brief.pdf
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - vertexcom,mse1021
+      - vertexcom,mse1022
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency:
+    minimum: 6000000
+    maximum: 7142857
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - spi-cpha
+  - spi-cpol
+  - spi-max-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet@0 {
+            compatible = "vertexcom,mse1021";
+            reg = <0>;
+            interrupt-parent = <&gpio>;
+            interrupts = <23 IRQ_TYPE_EDGE_RISING>;
+            spi-cpha;
+            spi-cpol;
+            spi-max-frequency = <7142857>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
index c11f23b20c4c..fec1cc9b9a08 100644
--- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Broadcom BCM4329 family fullmac wireless SDIO devices
+title: Broadcom BCM4329 family fullmac wireless SDIO/PCIE devices
 
 maintainers:
   - Arend van Spriel <arend@broadcom.com>
@@ -41,11 +41,17 @@ properties:
               - cypress,cyw4373-fmac
               - cypress,cyw43012-fmac
           - const: brcm,bcm4329-fmac
-      - const: brcm,bcm4329-fmac
+      - enum:
+          - brcm,bcm4329-fmac
+          - pci14e4,43dc  # BCM4355
+          - pci14e4,4464  # BCM4364
+          - pci14e4,4488  # BCM4377
+          - pci14e4,4425  # BCM4378
+          - pci14e4,4433  # BCM4387
 
   reg:
-    description: SDIO function number for the device, for most cases
-      this will be 1.
+    description: SDIO function number for the device (for most cases
+      this will be 1) or PCI device identifier.
 
   interrupts:
     maxItems: 1
@@ -75,6 +81,41 @@ properties:
     items:
       pattern: '^[A-Z][A-Z]-[A-Z][0-9A-Z]-[0-9]+$'
 
+  brcm,ccode-map-trivial:
+    description: |
+      Use a trivial mapping of ISO3166 country codes to brcmfmac firmware
+      country code and revision: cc -> { cc, 0 }. In other words, assume that
+      the CLM blob firmware uses ISO3166 country codes as well, and that all
+      revisions are zero. This property is mutually exclusive with
+      brcm,ccode-map. If both properties are specified, then brcm,ccode-map
+      takes precedence.
+    type: boolean
+
+  brcm,cal-blob:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description: A per-device calibration blob for the Wi-Fi radio. This
+      should be filled in by the bootloader from platform configuration
+      data, if necessary, and will be uploaded to the device if present.
+
+  brcm,board-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Overrides the board type, which is normally the compatible of
+      the root node. This can be used to decouple the overall system board or
+      device name from the board type for WiFi purposes, which is used to
+      construct firmware and NVRAM configuration filenames, allowing for
+      multiple devices that share the same module or characteristics for the
+      WiFi subsystem to share the same firmware/NVRAM files. On Apple platforms,
+      this should be the Apple module-instance codename prefixed by "apple,",
+      e.g. "apple,honshu".
+
+  apple,antenna-sku:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Antenna SKU used to identify a specific antenna configuration
+      on Apple platforms. This is use to build firmware filenames, to allow
+      platforms with different antenna configs to have different firmware and/or
+      NVRAM. This would normally be filled in by the bootloader from platform
+      configuration data.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt
deleted file mode 100644
index 6830c4786f8a..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Espressif ESP8089 wireless SDIO devices
-
-This node provides properties for controlling the ESP8089 wireless device.
-The node is expected to be specified as a child node to the SDIO controller
-that connects the device to the system.
-
-Required properties:
-
- - compatible : Should be "esp,esp8089".
-
-Optional properties:
- - esp,crystal-26M-en: Integer value for the crystal_26M_en firmware parameter
-
-Example:
-
-&mmc1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	vmmc-supply = <&reg_dldo1>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	bus-width = <4>;
-	non-removable;
-
-	esp8089: sdio_wifi@1 {
-		compatible = "esp,esp8089";
-		reg = <1>;
-		esp,crystal-26M-en = <2>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml
new file mode 100644
index 000000000000..0ea84d6fe73e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/esp,esp8089.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Espressif ESP8089
+
+maintainers:
+  - Hans de Goede <hdegoede@redhat.com>
+
+properties:
+  compatible:
+    const: esp,esp8089
+
+  reg:
+    maxItems: 1
+
+  esp,crystal-26M-en:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      Value for the crystal_26M_en firmware parameter
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    mmc {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wifi@1 {
+            compatible = "esp,esp8089";
+            reg = <1>;
+            esp,crystal-26M-en = <2>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml b/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml
index d58e1571df9b..d89f7a3f88a7 100644
--- a/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml
@@ -1,12 +1,11 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 # Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
-
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/net/wireless/ieee80211.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Common IEEE 802.11 Binding
+title: Common IEEE 802.11
 
 maintainers:
   - Lorenzo Bianconi <lorenzo@kernel.org>
diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
index 9bf9bbac16e2..cdc303caf5f4 100644
--- a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
+++ b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
@@ -1,4 +1,4 @@
-Marvell 8787/8897/8997 (sd8787/sd8897/sd8997/pcie8997) SDIO/PCIE devices
+Marvell 8787/8897/8978/8997 (sd8787/sd8897/sd8978/sd8997/pcie8997) SDIO/PCIE devices
 ------
 
 This node provides properties for controlling the Marvell SDIO/PCIE wireless device.
@@ -10,7 +10,9 @@ Required properties:
   - compatible : should be one of the following:
 	* "marvell,sd8787"
 	* "marvell,sd8897"
+	* "marvell,sd8978"
 	* "marvell,sd8997"
+	* "nxp,iw416"
 	* "pci11ab,2b42"
 	* "pci1b4b,2b42"
 
diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
index 3e2c2e43175e..67b63f119f64 100644
--- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
@@ -1,12 +1,11 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 # Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
-
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/net/wireless/mediatek,mt76.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: MediaTek mt76 wireless devices Generic Binding
+title: MediaTek mt76 wireless devices
 
 maintainers:
   - Felix Fietkau <nbd@nbd.name>
@@ -18,7 +17,7 @@ description: |
   wireless device. The node is expected to be specified as a child
   node of the PCI controller to which the wireless chip is connected.
   Alternatively, it can specify the wireless part of the MT7628/MT7688
-  or MT7622 SoC.
+  or MT7622/MT7986 SoC.
 
 allOf:
   - $ref: ieee80211.yaml#
@@ -29,9 +28,13 @@ properties:
       - mediatek,mt76
       - mediatek,mt7628-wmac
       - mediatek,mt7622-wmac
+      - mediatek,mt7986-wmac
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 3
+    description:
+      MT7986 should contain 3 regions consys, dcm, and sku, in this order.
 
   interrupts:
     maxItems: 1
@@ -39,6 +42,27 @@ properties:
   power-domains:
     maxItems: 1
 
+  memory-region:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+    description:
+      Specify the consys reset for mt7986.
+
+  reset-names:
+    const: consys
+
+  clocks:
+    maxItems: 2
+    description:
+      Specify the consys clocks for mt7986.
+
+  clock-names:
+    items:
+      - const: mcu
+      - const: ap2conn
+
   mediatek,infracfg:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -47,8 +71,17 @@ properties:
 
   ieee80211-freq-limit: true
 
+  mediatek,eeprom-data:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      EEPROM data embedded as array.
+
   mediatek,mtd-eeprom:
     $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to MTD partition
+          - description: offset containing EEPROM data
     description:
       Phandle to a MTD partition + offset containing EEPROM data
 
@@ -64,11 +97,25 @@ properties:
       calibration data is generic and specific calibration data should be
       pulled from the OTP ROM
 
+  mediatek,disable-radar-background:
+    type: boolean
+    description:
+      Disable/enable radar/CAC detection running on a dedicated offchannel
+      chain available on some hw.
+      Background radar/CAC detection allows to avoid the CAC downtime
+      switching on a different channel during CAC detection on the selected
+      radar channel.
+
   led:
     type: object
     $ref: /schemas/leds/common.yaml#
     additionalProperties: false
     properties:
+      led-active-low:
+        description:
+          LED is enabled with ground signal.
+        type: boolean
+
       led-sources:
         maxItems: 1
 
@@ -160,7 +207,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -186,9 +233,9 @@ examples:
                    channels = <36 48>;
                    rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
                    rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
-                                        <3 22 22 22 22 22 22 22 22 22 22>;
+                               /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
                    rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
-                                       <4 20 20 20 20 20 20 20 20 20 20 20 20>;
+                              /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
                };
                b1 {
                    channels = <100 181>;
@@ -226,3 +273,18 @@ examples:
 
       power-domains = <&scpsys 3>;
     };
+
+  - |
+    wifi@18000000 {
+        compatible = "mediatek,mt7986-wmac";
+        resets = <&watchdog 23>;
+        reset-names = "consys";
+        reg = <0x18000000 0x1000000>,
+              <0x10003000 0x1000>,
+              <0x11d10000 0x1000>;
+        interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&topckgen 50>,
+                 <&topckgen 62>;
+        clock-names = "mcu", "ap2conn";
+        memory-region = <&wmcpu_emi>;
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
index 6c35682377e6..2460ccc08237 100644
--- a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip WILC wireless devicetree bindings
+title: Microchip WILC wireless
 
 maintainers:
   - Adham Abozaeid <adham.abozaeid@microchip.com>
@@ -20,8 +20,6 @@ properties:
 
   reg: true
 
-  spi-max-frequency: true
-
   interrupts:
     maxItems: 1
 
@@ -32,14 +30,34 @@ properties:
   clock-names:
     const: rtc
 
+  enable-gpios:
+    maxItems: 1
+    description: Used by wilc1000-spi to determine the GPIO line
+      connected to the ENABLE line.  If specified, reset-gpios
+      must be specified as well as otherwise the driver cannot
+      ensure the timing required between asserting ENABLE
+      and deasserting RESET.  This should be declared as an
+      active-high signal.
+
+  reset-gpios:
+    maxItems: 1
+    description: Used by wilc1000-spi to determine the GPIO line
+      connected to the RESET line.  This should be declared as an
+      active-low signal.
+
 required:
   - compatible
   - interrupts
 
-additionalProperties: false
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
+
     spi {
       #address-cells = <1>;
       #size-cells = <0>;
@@ -51,6 +69,8 @@ examples:
         interrupts = <27 0>;
         clocks = <&pck1>;
         clock-names = "rtc";
+        enable-gpios = <&pioA 5 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
       };
     };
 
diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt
deleted file mode 100644
index aaaeeb5f935b..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* Qualcomm Atheros ath9k wireless devices
-
-This node provides properties for configuring the ath9k wireless device. The
-node is expected to be specified as a child node of the PCI controller to
-which the wireless chip is connected.
-
-Required properties:
-- compatible: For PCI and PCIe devices this should be an identifier following
-		the format as defined in "PCI Bus Binding to Open Firmware"
-		Revision 2.1. One of the possible formats is "pciVVVV,DDDD"
-		where VVVV is the PCI vendor ID and DDDD is PCI device ID.
-		Typically QCA's PCI vendor ID 168c is used while the PCI device
-		ID depends on the chipset - see the following (possibly
-		incomplete) list:
-			- 0023 for AR5416
-			- 0024 for AR5418
-			- 0027 for AR9160
-			- 0029 for AR9220 and AR9223
-			- 002a for AR9280 and AR9283
-			- 002b for AR9285
-			- 002c for AR2427
-			- 002d for AR9227
-			- 002e for AR9287
-			- 0030 for AR9380, AR9381 and AR9382
-			- 0032 for AR9485
-			- 0033 for AR9580 and AR9590
-			- 0034 for AR9462
-			- 0036 for AR9565
-			- 0037 for AR9485
-- reg: Address and length of the register set for the device.
-
-Optional properties:
-- qca,no-eeprom: Indicates that there is no physical EEPROM connected to the
-			ath9k wireless chip (in this case the calibration /
-			EEPROM data will be loaded from userspace using the
-			kernel firmware loader).
-
-The MAC address will be determined using the optional properties defined in
-net/ethernet.txt.
-
-In this example, the node is defined as child node of the PCI controller:
-&pci0 {
-	wifi@168c,002d {
-		compatible = "pci168c,002d";
-		reg = <0x7000 0 0 0 0x1000>;
-		qca,no-eeprom;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
new file mode 100644
index 000000000000..0e5412cff2bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qca,ath9k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros ath9k wireless devices
+
+maintainers:
+  - Toke Høiland-Jørgensen <toke@toke.dk>
+
+description: |
+  This node provides properties for configuring the ath9k wireless device.
+  The node is expected to be specified as a child node of the PCI controller
+  to which the wireless chip is connected.
+
+allOf:
+  - $ref: ieee80211.yaml#
+
+properties:
+  compatible:
+    enum:
+      - pci168c,0023  # AR5416
+      - pci168c,0024  # AR5418
+      - pci168c,0027  # AR9160
+      - pci168c,0029  # AR9220 and AR9223
+      - pci168c,002a  # AR9280 and AR9283
+      - pci168c,002b  # AR9285
+      - pci168c,002c  # AR2427 - 802.11n bonded out
+      - pci168c,002d  # AR9227
+      - pci168c,002e  # AR9287
+      - pci168c,0030  # AR9380, AR9381 and AR9382
+      - pci168c,0032  # AR9485
+      - pci168c,0033  # AR9580 and AR9590
+      - pci168c,0034  # AR9462
+      - pci168c,0036  # AR9565
+      - pci168c,0037  # AR1111 and AR9485
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ieee80211-freq-limit: true
+
+  qca,no-eeprom:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates that there is no physical EEPROM connected
+
+  nvmem-cells:
+    items:
+      - description: Reference to an nvmem node for the MAC address
+      - description: Reference to an nvmem node for calibration data
+
+  nvmem-cell-names:
+    items:
+      - const: mac-address
+      - const: calibration
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie0 {
+      #address-cells = <3>;
+      #size-cells = <2>;
+      wifi@0,0 {
+        compatible = "pci168c,002d";
+        reg = <0 0 0 0 0>;
+        interrupts = <3>;
+        qca,no-eeprom;
+      };
+    };
+  - |
+    pci0 {
+      #address-cells = <3>;
+      #size-cells = <2>;
+      wifi@0,11 {
+        compatible = "pci168c,0029";
+        reg = <0x8800 0 0 0 0>;
+        nvmem-cells = <&macaddr_art_c>, <&cal_art_1000>;
+        nvmem-cell-names = "mac-address", "calibration";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
deleted file mode 100644
index b61c2d5a0ff7..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ /dev/null
@@ -1,215 +0,0 @@
-* Qualcomm Atheros ath10k wireless devices
-
-Required properties:
-- compatible: Should be one of the following:
-	* "qcom,ath10k"
-	* "qcom,ipq4019-wifi"
-	* "qcom,wcn3990-wifi"
-
-PCI based devices uses compatible string "qcom,ath10k" and takes calibration
-data along with board specific data via "qcom,ath10k-calibration-data".
-Rest of the properties are not applicable for PCI based devices.
-
-AHB based devices (i.e. ipq4019) uses compatible string "qcom,ipq4019-wifi"
-and also uses most of the properties defined in this doc (except
-"qcom,ath10k-calibration-data"). It uses "qcom,ath10k-pre-calibration-data"
-to carry pre calibration data.
-
-In general, entry "qcom,ath10k-pre-calibration-data" and
-"qcom,ath10k-calibration-data" conflict with each other and only one
-can be provided per device.
-
-SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi".
-
-- reg: Address and length of the register set for the device.
-- reg-names: Must include the list of following reg names,
-	     "membase"
-- interrupts: reference to the list of 17 interrupt numbers for "qcom,ipq4019-wifi"
-	      compatible target.
-	      reference to the list of 12 interrupt numbers for "qcom,wcn3990-wifi"
-	      compatible target.
-	      Must contain interrupt-names property per entry for
-	      "qcom,ath10k", "qcom,ipq4019-wifi" compatible targets.
-
-- interrupt-names: Must include the entries for MSI interrupt
-		   names ("msi0" to "msi15") and legacy interrupt
-		   name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi"
-		   compatible targets.
-
-Optional properties:
-- resets: Must contain an entry for each entry in reset-names.
-          See ../reset/reseti.txt for details.
-- reset-names: Must include the list of following reset names,
-	       "wifi_cpu_init"
-	       "wifi_radio_srif"
-	       "wifi_radio_warm"
-	       "wifi_radio_cold"
-	       "wifi_core_warm"
-	       "wifi_core_cold"
-- clocks: List of clock specifiers, must contain an entry for each required
-          entry in clock-names.
-- clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref",
-	       "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and
-	       "cxo_ref_clk_pin" and optionally "qdss" for "qcom,wcn3990-wifi"
-	       compatible target.
-- qcom,msi_addr: MSI interrupt address.
-- qcom,msi_base: Base value to add before writing MSI data into
-		MSI address register.
-- qcom,ath10k-calibration-variant: string to search for in the board-2.bin
-				   variant list with the same bus and device
-				   specific ids
-- qcom,ath10k-calibration-data : calibration data + board specific data
-				 as an array, the length can vary between
-				 hw versions.
-- qcom,ath10k-pre-calibration-data : pre calibration data as an array,
-				     the length can vary between hw versions.
-- <supply-name>-supply: handle to the regulator device tree node
-			   optional "supply-name" are "vdd-0.8-cx-mx",
-			   "vdd-1.8-xo", "vdd-1.3-rfa", "vdd-3.3-ch0",
-			   and "vdd-3.3-ch1".
-- memory-region:
-	Usage: optional
-	Value type: <phandle>
-	Definition: reference to the reserved-memory for the msa region
-		    used by the wifi firmware running in Q6.
-- iommus:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: A list of phandle and IOMMU specifier pairs.
-- ext-fem-name:
-	Usage: Optional
-	Value type: string
-	Definition: Name of external front end module used. Some valid FEM names
-		    for example: "microsemi-lx5586", "sky85703-11"
-		    and "sky85803" etc.
-- qcom,snoc-host-cap-8bit-quirk:
-	Usage: Optional
-	Value type: <empty>
-	Definition: Quirk specifying that the firmware expects the 8bit version
-		    of the host capability QMI request
-- qcom,xo-cal-data: xo cal offset to be configured in xo trim register.
-
-- qcom,msa-fixed-perm: Boolean context flag to disable SCM call for statically
-		       mapped msa region.
-
-- qcom,coexist-support : should contain eithr "0" or "1" to indicate coex
-			 support by the hardware.
-- qcom,coexist-gpio-pin : gpio pin number  information to support coex
-			  which will be used by wifi firmware.
-
-* Subnodes
-The ath10k wifi node can contain one optional firmware subnode.
-Firmware subnode is needed when the platform does not have TustZone.
-The firmware subnode must have:
-
-- iommus:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: A list of phandle and IOMMU specifier pairs.
-
-
-Example (to supply PCI based wifi block details):
-
-In this example, the node is defined as child node of the PCI controller.
-
-pci {
-	pcie@0 {
-		reg = <0 0 0 0 0>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-
-		wifi@0,0 {
-			reg = <0 0 0 0 0>;
-			qcom,ath10k-calibration-data = [ 01 02 03 ... ];
-			ext-fem-name = "microsemi-lx5586";
-		};
-	};
-};
-
-Example (to supply ipq4019 SoC wifi block details):
-
-wifi0: wifi@a000000 {
-	compatible = "qcom,ipq4019-wifi";
-	reg = <0xa000000 0x200000>;
-	resets = <&gcc WIFI0_CPU_INIT_RESET>,
-		 <&gcc WIFI0_RADIO_SRIF_RESET>,
-		 <&gcc WIFI0_RADIO_WARM_RESET>,
-		 <&gcc WIFI0_RADIO_COLD_RESET>,
-		 <&gcc WIFI0_CORE_WARM_RESET>,
-		 <&gcc WIFI0_CORE_COLD_RESET>;
-	reset-names = "wifi_cpu_init",
-		      "wifi_radio_srif",
-		      "wifi_radio_warm",
-		      "wifi_radio_cold",
-		      "wifi_core_warm",
-		      "wifi_core_cold";
-	clocks = <&gcc GCC_WCSS2G_CLK>,
-		 <&gcc GCC_WCSS2G_REF_CLK>,
-		 <&gcc GCC_WCSS2G_RTC_CLK>;
-	clock-names = "wifi_wcss_cmd",
-		      "wifi_wcss_ref",
-		      "wifi_wcss_rtc";
-	interrupts = <0 0x20 0x1>,
-		     <0 0x21 0x1>,
-		     <0 0x22 0x1>,
-		     <0 0x23 0x1>,
-		     <0 0x24 0x1>,
-		     <0 0x25 0x1>,
-		     <0 0x26 0x1>,
-		     <0 0x27 0x1>,
-		     <0 0x28 0x1>,
-		     <0 0x29 0x1>,
-		     <0 0x2a 0x1>,
-		     <0 0x2b 0x1>,
-		     <0 0x2c 0x1>,
-		     <0 0x2d 0x1>,
-		     <0 0x2e 0x1>,
-		     <0 0x2f 0x1>,
-		     <0 0xa8 0x0>;
-	interrupt-names = "msi0",  "msi1",  "msi2",  "msi3",
-			  "msi4",  "msi5",  "msi6",  "msi7",
-			  "msi8",  "msi9",  "msi10", "msi11",
-			  "msi12", "msi13", "msi14", "msi15",
-			  "legacy";
-	qcom,msi_addr = <0x0b006040>;
-	qcom,msi_base = <0x40>;
-	qcom,ath10k-pre-calibration-data = [ 01 02 03 ... ];
-	qcom,coexist-support = <1>;
-	qcom,coexist-gpio-pin = <0x33>;
-};
-
-Example (to supply wcn3990 SoC wifi block details):
-
-wifi@18000000 {
-		compatible = "qcom,wcn3990-wifi";
-		reg = <0x18800000 0x800000>;
-		reg-names = "membase";
-		clocks = <&clock_gcc clk_rf_clk2_pin>;
-		clock-names = "cxo_ref_clk_pin";
-		interrupts =
-			<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-			<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
-		vdd-0.8-cx-mx-supply = <&pm8998_l5>;
-		vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
-		vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
-		vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
-		vdd-3.3-ch1-supply = <&vreg_l26a_3p3>;
-		memory-region = <&wifi_msa_mem>;
-		iommus = <&apps_smmu 0x0040 0x1>;
-		qcom,msa-fixed-perm;
-		wifi-firmware {
-			iommus = <&apps_iommu 0xc22 0x1>;
-		};
-};
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
new file mode 100644
index 000000000000..c85ed330426d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
@@ -0,0 +1,358 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ath10k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath10k wireless devices
+
+maintainers:
+  - Kalle Valo <kvalo@kernel.org>
+
+description:
+  Qualcomm Technologies, Inc. IEEE 802.11ac devices.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ath10k # SDIO-based devices
+      - qcom,ipq4019-wifi
+      - qcom,wcn3990-wifi # SNoC-based devices
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: membase
+
+  interrupts:
+    minItems: 12
+    maxItems: 17
+
+  interrupt-names:
+    minItems: 12
+    maxItems: 17
+
+  memory-region:
+    maxItems: 1
+    description:
+      Reference to the MSA memory region used by the Wi-Fi firmware
+      running on the Q6 core.
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  resets:
+    maxItems: 6
+
+  reset-names:
+    items:
+      - const: wifi_cpu_init
+      - const: wifi_radio_srif
+      - const: wifi_radio_warm
+      - const: wifi_radio_cold
+      - const: wifi_core_warm
+      - const: wifi_core_cold
+
+  ext-fem-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Name of external front end module used.
+    enum:
+      - microsemi-lx5586
+      - sky85703-11
+      - sky85803
+
+  wifi-firmware:
+    type: object
+    additionalProperties: false
+    description: |
+      The ath10k Wi-Fi node can contain one optional firmware subnode.
+      Firmware subnode is needed when the platform does not have Trustzone.
+    properties:
+      iommus:
+        maxItems: 1
+    required:
+      - iommus
+
+  qcom,ath10k-calibration-data:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Calibration data + board-specific data as a byte array. The length
+      can vary between hardware versions.
+
+  qcom,ath10k-calibration-variant:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Unique variant identifier of the calibration data in board-2.bin
+      for designs with colliding bus and device specific ids
+
+  qcom,ath10k-pre-calibration-data:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Pre-calibration data as a byte array. The length can vary between
+      hardware versions.
+
+  qcom,coexist-support:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    enum: [0, 1]
+    description:
+      Indicate coex support by the hardware.
+
+  qcom,coexist-gpio-pin:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      COEX GPIO number provided to the Wi-Fi firmware.
+
+  qcom,msa-fixed-perm:
+    type: boolean
+    description:
+      Whether to skip executing an SCM call that reassigns the memory
+      region ownership.
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: State bits used by the AP to signal the WLAN Q6.
+    items:
+      - description: Signal bits used to enable/disable low power mode
+                     on WCN in the case of WoW (Wake on Wireless).
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output.
+    items:
+      - const: wlan-smp2p-out
+
+  qcom,snoc-host-cap-8bit-quirk:
+    type: boolean
+    description:
+      Quirk specifying that the firmware expects the 8bit version
+      of the host capability QMI request
+
+  qcom,xo-cal-data:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      XO cal offset to be configured in XO trim register.
+
+  vdd-0.8-cx-mx-supply:
+    description: Main logic power rail
+
+  vdd-1.8-xo-supply:
+    description: Crystal oscillator supply
+
+  vdd-1.3-rfa-supply:
+    description: RFA supply
+
+  vdd-3.3-ch0-supply:
+    description: Primary Wi-Fi antenna supply
+
+  vdd-3.3-ch1-supply:
+    description: Secondary Wi-Fi antenna supply
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-wifi
+    then:
+      properties:
+        interrupts:
+          minItems: 17
+          maxItems: 17
+
+        interrupt-names:
+          items:
+            - const: msi0
+            - const: msi1
+            - const: msi2
+            - const: msi3
+            - const: msi4
+            - const: msi5
+            - const: msi6
+            - const: msi7
+            - const: msi8
+            - const: msi9
+            - const: msi10
+            - const: msi11
+            - const: msi12
+            - const: msi13
+            - const: msi14
+            - const: msi15
+            - const: legacy
+
+        clocks:
+          items:
+            - description: Wi-Fi command clock
+            - description: Wi-Fi reference clock
+            - description: Wi-Fi RTC clock
+
+        clock-names:
+          items:
+            - const: wifi_wcss_cmd
+            - const: wifi_wcss_ref
+            - const: wifi_wcss_rtc
+
+      required:
+        - clocks
+        - clock-names
+        - interrupts
+        - interrupt-names
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn3990-wifi
+
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          items:
+            - description: XO reference clock
+            - description: Qualcomm Debug Subsystem clock
+
+        clock-names:
+          minItems: 1
+          items:
+            - const: cxo_ref_clk_pin
+            - const: qdss
+
+        interrupts:
+          items:
+            - description: CE0
+            - description: CE1
+            - description: CE2
+            - description: CE3
+            - description: CE4
+            - description: CE5
+            - description: CE6
+            - description: CE7
+            - description: CE8
+            - description: CE9
+            - description: CE10
+            - description: CE11
+
+        interrupt-names: false
+
+      required:
+        - interrupts
+
+examples:
+  # SNoC
+  - |
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    wifi@18800000 {
+      compatible = "qcom,wcn3990-wifi";
+      reg = <0x18800000 0x800000>;
+      reg-names = "membase";
+      memory-region = <&wlan_msa_mem>;
+      clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>;
+      clock-names = "cxo_ref_clk_pin";
+      interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+      iommus = <&anoc2_smmu 0x1900>,
+               <&anoc2_smmu 0x1901>;
+      qcom,snoc-host-cap-8bit-quirk;
+      vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+      vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+      vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+      vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+      vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+      wifi-firmware {
+        iommus = <&apps_smmu 0x1c02 0x1>;
+      };
+    };
+
+  # AHB
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+
+    wifi@a000000 {
+        compatible = "qcom,ipq4019-wifi";
+        reg = <0xa000000 0x200000>;
+        resets = <&gcc WIFI0_CPU_INIT_RESET>,
+                 <&gcc WIFI0_RADIO_SRIF_RESET>,
+                 <&gcc WIFI0_RADIO_WARM_RESET>,
+                 <&gcc WIFI0_RADIO_COLD_RESET>,
+                 <&gcc WIFI0_CORE_WARM_RESET>,
+                 <&gcc WIFI0_CORE_COLD_RESET>;
+        reset-names = "wifi_cpu_init",
+                      "wifi_radio_srif",
+                      "wifi_radio_warm",
+                      "wifi_radio_cold",
+                      "wifi_core_warm",
+                      "wifi_core_cold";
+        clocks = <&gcc GCC_WCSS2G_CLK>,
+                 <&gcc GCC_WCSS2G_REF_CLK>,
+                 <&gcc GCC_WCSS2G_RTC_CLK>;
+        clock-names = "wifi_wcss_cmd",
+                      "wifi_wcss_ref",
+                      "wifi_wcss_rtc";
+        interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 41 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 42 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 43 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names =  "msi0",
+                           "msi1",
+                           "msi2",
+                           "msi3",
+                           "msi4",
+                           "msi5",
+                           "msi6",
+                           "msi7",
+                           "msi8",
+                           "msi9",
+                           "msi10",
+                           "msi11",
+                           "msi12",
+                           "msi13",
+                           "msi14",
+                           "msi15",
+                           "legacy";
+      };
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
new file mode 100644
index 000000000000..817f02a8b481
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2023 Linaro Limited
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath11k wireless devices (PCIe)
+
+maintainers:
+  - Kalle Valo <kvalo@kernel.org>
+
+description: |
+  Qualcomm Technologies IEEE 802.11ax PCIe devices
+
+properties:
+  compatible:
+    enum:
+      - pci17cb,1103  # WCN6855
+
+  reg:
+    maxItems: 1
+
+  qcom,ath11k-calibration-variant:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: |
+      string to uniquely identify variant of the calibration data for designs
+      with colliding bus and device ids
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pcie {
+        #address-cells = <3>;
+        #size-cells = <2>;
+
+        pcie@0 {
+            device_type = "pci";
+            reg = <0x0 0x0 0x0 0x0 0x0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            ranges;
+
+            bus-range = <0x01 0xff>;
+
+            wifi@0 {
+                compatible = "pci17cb,1103";
+                reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+                qcom,ath11k-calibration-variant = "LE_X13S";
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
index 85c2f699d602..7d5f982a3d09 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -1,15 +1,14 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 # Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
-
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies ath11k wireless devices Generic Binding
+title: Qualcomm Technologies ath11k wireless devices
 
 maintainers:
-  - Kalle Valo <kvalo@codeaurora.org>
+  - Kalle Valo <kvalo@kernel.org>
 
 description: |
   These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax
@@ -20,120 +19,18 @@ properties:
     enum:
       - qcom,ipq8074-wifi
       - qcom,ipq6018-wifi
+      - qcom,wcn6750-wifi
+      - qcom,ipq5018-wifi
 
   reg:
     maxItems: 1
 
   interrupts:
-    items:
-      - description: misc-pulse1 interrupt events
-      - description: misc-latch interrupt events
-      - description: sw exception interrupt events
-      - description: watchdog interrupt events
-      - description: interrupt event for ring CE0
-      - description: interrupt event for ring CE1
-      - description: interrupt event for ring CE2
-      - description: interrupt event for ring CE3
-      - description: interrupt event for ring CE4
-      - description: interrupt event for ring CE5
-      - description: interrupt event for ring CE6
-      - description: interrupt event for ring CE7
-      - description: interrupt event for ring CE8
-      - description: interrupt event for ring CE9
-      - description: interrupt event for ring CE10
-      - description: interrupt event for ring CE11
-      - description: interrupt event for ring host2wbm-desc-feed
-      - description: interrupt event for ring host2reo-re-injection
-      - description: interrupt event for ring host2reo-command
-      - description: interrupt event for ring host2rxdma-monitor-ring3
-      - description: interrupt event for ring host2rxdma-monitor-ring2
-      - description: interrupt event for ring host2rxdma-monitor-ring1
-      - description: interrupt event for ring reo2ost-exception
-      - description: interrupt event for ring wbm2host-rx-release
-      - description: interrupt event for ring reo2host-status
-      - description: interrupt event for ring reo2host-destination-ring4
-      - description: interrupt event for ring reo2host-destination-ring3
-      - description: interrupt event for ring reo2host-destination-ring2
-      - description: interrupt event for ring reo2host-destination-ring1
-      - description: interrupt event for ring rxdma2host-monitor-destination-mac3
-      - description: interrupt event for ring rxdma2host-monitor-destination-mac2
-      - description: interrupt event for ring rxdma2host-monitor-destination-mac1
-      - description: interrupt event for ring ppdu-end-interrupts-mac3
-      - description: interrupt event for ring ppdu-end-interrupts-mac2
-      - description: interrupt event for ring ppdu-end-interrupts-mac1
-      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
-      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
-      - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
-      - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
-      - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
-      - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
-      - description: interrupt event for ring rxdma2host-destination-ring-mac3
-      - description: interrupt event for ring rxdma2host-destination-ring-mac2
-      - description: interrupt event for ring rxdma2host-destination-ring-mac1
-      - description: interrupt event for ring host2tcl-input-ring4
-      - description: interrupt event for ring host2tcl-input-ring3
-      - description: interrupt event for ring host2tcl-input-ring2
-      - description: interrupt event for ring host2tcl-input-ring1
-      - description: interrupt event for ring wbm2host-tx-completions-ring3
-      - description: interrupt event for ring wbm2host-tx-completions-ring2
-      - description: interrupt event for ring wbm2host-tx-completions-ring1
-      - description: interrupt event for ring tcl2host-status-ring
-
+    minItems: 32
+    maxItems: 52
 
   interrupt-names:
-    items:
-      - const: misc-pulse1
-      - const: misc-latch
-      - const: sw-exception
-      - const: watchdog
-      - const: ce0
-      - const: ce1
-      - const: ce2
-      - const: ce3
-      - const: ce4
-      - const: ce5
-      - const: ce6
-      - const: ce7
-      - const: ce8
-      - const: ce9
-      - const: ce10
-      - const: ce11
-      - const: host2wbm-desc-feed
-      - const: host2reo-re-injection
-      - const: host2reo-command
-      - const: host2rxdma-monitor-ring3
-      - const: host2rxdma-monitor-ring2
-      - const: host2rxdma-monitor-ring1
-      - const: reo2ost-exception
-      - const: wbm2host-rx-release
-      - const: reo2host-status
-      - const: reo2host-destination-ring4
-      - const: reo2host-destination-ring3
-      - const: reo2host-destination-ring2
-      - const: reo2host-destination-ring1
-      - const: rxdma2host-monitor-destination-mac3
-      - const: rxdma2host-monitor-destination-mac2
-      - const: rxdma2host-monitor-destination-mac1
-      - const: ppdu-end-interrupts-mac3
-      - const: ppdu-end-interrupts-mac2
-      - const: ppdu-end-interrupts-mac1
-      - const: rxdma2host-monitor-status-ring-mac3
-      - const: rxdma2host-monitor-status-ring-mac2
-      - const: rxdma2host-monitor-status-ring-mac1
-      - const: host2rxdma-host-buf-ring-mac3
-      - const: host2rxdma-host-buf-ring-mac2
-      - const: host2rxdma-host-buf-ring-mac1
-      - const: rxdma2host-destination-ring-mac3
-      - const: rxdma2host-destination-ring-mac2
-      - const: rxdma2host-destination-ring-mac1
-      - const: host2tcl-input-ring4
-      - const: host2tcl-input-ring3
-      - const: host2tcl-input-ring2
-      - const: host2tcl-input-ring1
-      - const: wbm2host-tx-completions-ring3
-      - const: wbm2host-tx-completions-ring2
-      - const: wbm2host-tx-completions-ring1
-      - const: tcl2host-status-ring
+    maxItems: 52
 
   qcom,rproc:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -150,22 +47,225 @@ properties:
       string to uniquely identify variant of the calibration data in the
       board-2.bin for designs with colliding bus and device specific ids
 
+  memory-region:
+    minItems: 1
+    maxItems: 2
+    description:
+      phandle to a node describing reserved memory (System RAM memory)
+      used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt)
+
+  iommus:
+    minItems: 1
+    maxItems: 2
+
+  wifi-firmware:
+    type: object
+    description: |
+      WCN6750 wifi node can contain one optional firmware subnode.
+      Firmware subnode is needed when the platform does not have Trustzone.
+    required:
+      - iommus
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: State bits used by the AP to signal the WLAN Q6.
+    items:
+      - description: Signal bits used to enable/disable low power mode
+                     on WCN6750 in the case of WoW (Wake on Wireless).
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output.
+    items:
+      - const: wlan-smp2p-out
+
 required:
   - compatible
   - reg
   - interrupts
-  - interrupt-names
   - qcom,rproc
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-wifi
+              - qcom,ipq6018-wifi
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: misc-pulse1 interrupt events
+            - description: misc-latch interrupt events
+            - description: sw exception interrupt events
+            - description: watchdog interrupt events
+            - description: interrupt event for ring CE0
+            - description: interrupt event for ring CE1
+            - description: interrupt event for ring CE2
+            - description: interrupt event for ring CE3
+            - description: interrupt event for ring CE4
+            - description: interrupt event for ring CE5
+            - description: interrupt event for ring CE6
+            - description: interrupt event for ring CE7
+            - description: interrupt event for ring CE8
+            - description: interrupt event for ring CE9
+            - description: interrupt event for ring CE10
+            - description: interrupt event for ring CE11
+            - description: interrupt event for ring host2wbm-desc-feed
+            - description: interrupt event for ring host2reo-re-injection
+            - description: interrupt event for ring host2reo-command
+            - description: interrupt event for ring host2rxdma-monitor-ring3
+            - description: interrupt event for ring host2rxdma-monitor-ring2
+            - description: interrupt event for ring host2rxdma-monitor-ring1
+            - description: interrupt event for ring reo2ost-exception
+            - description: interrupt event for ring wbm2host-rx-release
+            - description: interrupt event for ring reo2host-status
+            - description: interrupt event for ring reo2host-destination-ring4
+            - description: interrupt event for ring reo2host-destination-ring3
+            - description: interrupt event for ring reo2host-destination-ring2
+            - description: interrupt event for ring reo2host-destination-ring1
+            - description: interrupt event for ring rxdma2host-monitor-destination-mac3
+            - description: interrupt event for ring rxdma2host-monitor-destination-mac2
+            - description: interrupt event for ring rxdma2host-monitor-destination-mac1
+            - description: interrupt event for ring ppdu-end-interrupts-mac3
+            - description: interrupt event for ring ppdu-end-interrupts-mac2
+            - description: interrupt event for ring ppdu-end-interrupts-mac1
+            - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
+            - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
+            - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
+            - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
+            - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
+            - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
+            - description: interrupt event for ring rxdma2host-destination-ring-mac3
+            - description: interrupt event for ring rxdma2host-destination-ring-mac2
+            - description: interrupt event for ring rxdma2host-destination-ring-mac1
+            - description: interrupt event for ring host2tcl-input-ring4
+            - description: interrupt event for ring host2tcl-input-ring3
+            - description: interrupt event for ring host2tcl-input-ring2
+            - description: interrupt event for ring host2tcl-input-ring1
+            - description: interrupt event for ring wbm2host-tx-completions-ring3
+            - description: interrupt event for ring wbm2host-tx-completions-ring2
+            - description: interrupt event for ring wbm2host-tx-completions-ring1
+            - description: interrupt event for ring tcl2host-status-ring
+        interrupt-names:
+          items:
+            - const: misc-pulse1
+            - const: misc-latch
+            - const: sw-exception
+            - const: watchdog
+            - const: ce0
+            - const: ce1
+            - const: ce2
+            - const: ce3
+            - const: ce4
+            - const: ce5
+            - const: ce6
+            - const: ce7
+            - const: ce8
+            - const: ce9
+            - const: ce10
+            - const: ce11
+            - const: host2wbm-desc-feed
+            - const: host2reo-re-injection
+            - const: host2reo-command
+            - const: host2rxdma-monitor-ring3
+            - const: host2rxdma-monitor-ring2
+            - const: host2rxdma-monitor-ring1
+            - const: reo2ost-exception
+            - const: wbm2host-rx-release
+            - const: reo2host-status
+            - const: reo2host-destination-ring4
+            - const: reo2host-destination-ring3
+            - const: reo2host-destination-ring2
+            - const: reo2host-destination-ring1
+            - const: rxdma2host-monitor-destination-mac3
+            - const: rxdma2host-monitor-destination-mac2
+            - const: rxdma2host-monitor-destination-mac1
+            - const: ppdu-end-interrupts-mac3
+            - const: ppdu-end-interrupts-mac2
+            - const: ppdu-end-interrupts-mac1
+            - const: rxdma2host-monitor-status-ring-mac3
+            - const: rxdma2host-monitor-status-ring-mac2
+            - const: rxdma2host-monitor-status-ring-mac1
+            - const: host2rxdma-host-buf-ring-mac3
+            - const: host2rxdma-host-buf-ring-mac2
+            - const: host2rxdma-host-buf-ring-mac1
+            - const: rxdma2host-destination-ring-mac3
+            - const: rxdma2host-destination-ring-mac2
+            - const: rxdma2host-destination-ring-mac1
+            - const: host2tcl-input-ring4
+            - const: host2tcl-input-ring3
+            - const: host2tcl-input-ring2
+            - const: host2tcl-input-ring1
+            - const: wbm2host-tx-completions-ring3
+            - const: wbm2host-tx-completions-ring2
+            - const: wbm2host-tx-completions-ring1
+            - const: tcl2host-status-ring
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq8074-wifi
+              - qcom,ipq6018-wifi
+    then:
+      required:
+        - interrupt-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn6750-wifi
+    then:
+      properties:
+        interrupts:
+          items:
+            - description: interrupt event for ring CE1
+            - description: interrupt event for ring CE2
+            - description: interrupt event for ring CE3
+            - description: interrupt event for ring CE4
+            - description: interrupt event for ring CE5
+            - description: interrupt event for ring CE6
+            - description: interrupt event for ring CE7
+            - description: interrupt event for ring CE8
+            - description: interrupt event for ring CE9
+            - description: interrupt event for ring CE10
+            - description: interrupt event for ring DP1
+            - description: interrupt event for ring DP2
+            - description: interrupt event for ring DP3
+            - description: interrupt event for ring DP4
+            - description: interrupt event for ring DP5
+            - description: interrupt event for ring DP6
+            - description: interrupt event for ring DP7
+            - description: interrupt event for ring DP8
+            - description: interrupt event for ring DP9
+            - description: interrupt event for ring DP10
+            - description: interrupt event for ring DP11
+            - description: interrupt event for ring DP12
+            - description: interrupt event for ring DP13
+            - description: interrupt event for ring DP14
+            - description: interrupt event for ring DP15
+            - description: interrupt event for ring DP16
+            - description: interrupt event for ring DP17
+            - description: interrupt event for ring DP18
+            - description: interrupt event for ring DP19
+            - description: interrupt event for ring DP20
+            - description: interrupt event for ring DP21
+            - description: interrupt event for ring DP22
+
 examples:
   - |
 
-    q6v5_wcss: q6v5_wcss@CD00000 {
+    q6v5_wcss: remoteproc@cd00000 {
         compatible = "qcom,ipq8074-wcss-pil";
-        reg = <0xCD00000 0x4040>,
-              <0x4AB000 0x20>;
+        reg = <0xcd00000 0x4040>,
+              <0x4ab000 0x20>;
         reg-names = "qdsp6",
                     "rmb";
     };
@@ -279,3 +379,90 @@ examples:
                           "tcl2host-status-ring";
         qcom,rproc = <&q6v5_wcss>;
     };
+
+  - |
+
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        qcn9074_0: wifi@51100000 {
+            no-map;
+            reg = <0x0 0x51100000 0x0 0x03500000>;
+        };
+    };
+
+    pci {
+        pcie0 {
+            #size-cells = <2>;
+            #address-cells = <3>;
+
+            wifi_0: wifi@0 {
+                reg = <0 0 0 0 0>;
+                memory-region = <&qcn9074_0>;
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    reserved-memory {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        wlan_ce_mem: memory@4cd000 {
+            no-map;
+            reg = <0x0 0x004cd000 0x0 0x1000>;
+        };
+
+        wlan_fw_mem: memory@80c00000 {
+            no-map;
+            reg = <0x0 0x80c00000 0x0 0xc00000>;
+        };
+    };
+
+    wifi: wifi@17a10040 {
+        compatible = "qcom,wcn6750-wifi";
+        reg = <0x17a10040 0x0>;
+        iommus = <&apps_smmu 0x1c00 0x1>;
+        interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>;
+        qcom,rproc = <&remoteproc_wpss>;
+        memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>;
+        qcom,smem-states = <&wlan_smp2p_out 0>;
+        qcom,smem-state-names = "wlan-smp2p-out";
+        wifi-firmware {
+            iommus = <&apps_smmu 0x1c02 0x1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
new file mode 100644
index 000000000000..84e5659e50ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020, Silicon Laboratories, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/silabs,wfx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Silicon Labs WFxxx
+
+maintainers:
+  - Jérôme Pouiller <jerome.pouiller@silabs.com>
+
+description: >
+  Support for the Wifi chip WFxxx from Silicon Labs. Currently, the only device
+  from the WFxxx series is the WF200 described here:
+     https://www.silabs.com/documents/public/data-sheets/wf200-datasheet.pdf
+
+  The WF200 can be connected via SPI or via SDIO.
+
+  For SDIO:
+
+    Declaring the WFxxx chip in device tree is mandatory (usually, the VID/PID is
+    sufficient for the SDIO devices).
+
+    It is recommended to declare a mmc-pwrseq on SDIO host above WFx. Without
+    it, you may encounter issues during reboot. The mmc-pwrseq should be
+    compatible with mmc-pwrseq-simple. Please consult
+    Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml for more
+    information.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - prt,prtt1c-wfm200 # Protonic PRTT1C Board
+          - silabs,brd4001a # WGM160P Evaluation Board
+          - silabs,brd8022a # WF200 Evaluation Board
+          - silabs,brd8023a # WFM200 Evaluation Board
+      - const: silabs,wf200 # Chip alone without antenna
+
+  reg:
+    description:
+      When used on SDIO bus, <reg> must be set to 1. When used on SPI bus, it is
+      the chip select address of the device as defined in the SPI devices
+      bindings.
+    maxItems: 1
+
+  interrupts:
+    description: The interrupt line. Should be IRQ_TYPE_EDGE_RISING. When SPI is
+      used, this property is required. When SDIO is used, the "in-band"
+      interrupt provided by the SDIO bus is used unless an interrupt is defined
+      in the Device Tree.
+    maxItems: 1
+
+  reset-gpios:
+    description: (SPI only) Phandle of gpio that will be used to reset chip
+      during probe. Without this property, you may encounter issues with warm
+      boot.
+
+      For SDIO, the reset gpio should declared using a mmc-pwrseq.
+    maxItems: 1
+
+  wakeup-gpios:
+    description: Phandle of gpio that will be used to wake-up chip. Without this
+      property, driver will disable most of power saving features.
+    maxItems: 1
+
+  silabs,antenna-config-file:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Use an alternative file for antenna configuration (aka
+      "Platform Data Set" in Silabs jargon). Default depends of "compatible"
+      string. For "silabs,wf200", the default is 'wf200.pds'.
+
+  local-mac-address: true
+
+  mac-address: true
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wifi@0 {
+            compatible = "silabs,brd8022a", "silabs,wf200";
+            pinctrl-names = "default";
+            pinctrl-0 = <&wfx_irq &wfx_gpios>;
+            reg = <0>;
+            interrupts-extended = <&gpio 16 IRQ_TYPE_EDGE_RISING>;
+            wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+            spi-max-frequency = <42000000>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    wfx_pwrseq: wfx_pwrseq {
+        compatible = "mmc-pwrseq-simple";
+        pinctrl-names = "default";
+        pinctrl-0 = <&wfx_reset>;
+        reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+    };
+
+    mmc {
+        mmc-pwrseq = <&wfx_pwrseq>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wifi@1 {
+            compatible = "silabs,brd8022a", "silabs,wf200";
+            pinctrl-names = "default";
+            pinctrl-0 = <&wfx_wakeup>;
+            reg = <1>;
+            wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
deleted file mode 100644
index cb5c9e1569ca..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore,spi.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-* Texas Instruments wl12xx/wl18xx wireless lan controller
-
-The wl12xx/wl18xx chips can be connected via SPI or via SDIO. This
-document describes the binding for the SPI connected chip.
-
-Required properties:
-- compatible :          Should be one of the following:
-    * "ti,wl1271"
-    * "ti,wl1273"
-    * "ti,wl1281"
-    * "ti,wl1283"
-    * "ti,wl1801"
-    * "ti,wl1805"
-    * "ti,wl1807"
-    * "ti,wl1831"
-    * "ti,wl1835"
-    * "ti,wl1837"
-- reg :                 Chip select address of device
-- spi-max-frequency :   Maximum SPI clocking speed of device in Hz
-- interrupts :          Should contain parameters for 1 interrupt line.
-- vwlan-supply :        Point the node of the regulator that powers/enable the
-                        wl12xx/wl18xx chip
-
-Optional properties:
-- ref-clock-frequency : Reference clock frequency (should be set for wl12xx)
-- clock-xtal :          boolean, clock is generated from XTAL
-
-- Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
-  for optional SPI connection related properties,
-
-Examples:
-
-For wl12xx family:
-&spi1 {
-	wlcore: wlcore@1 {
-		compatible = "ti,wl1271";
-		reg = <1>;
-		spi-max-frequency = <48000000>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		vwlan-supply = <&vwlan_fixed>;
-		clock-xtal;
-		ref-clock-frequency = <38400000>;
-	};
-};
-
-For wl18xx family:
-&spi0 {
-	wlcore: wlcore@0 {
-		compatible = "ti,wl1835";
-		reg = <0>;
-		spi-max-frequency = <48000000>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <27 IRQ_TYPE_EDGE_RISING>;
-		vwlan-supply = <&vwlan_fixed>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
deleted file mode 100644
index 9306c4dadd46..000000000000
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-TI Wilink 6/7/8 (wl12xx/wl18xx) SDIO devices
-
-This node provides properties for controlling the wilink wireless device. The
-node is expected to be specified as a child node to the SDIO controller that
-connects the device to the system.
-
-Required properties:
- - compatible: should be one of the following:
-    * "ti,wl1271"
-    * "ti,wl1273"
-    * "ti,wl1281"
-    * "ti,wl1283"
-    * "ti,wl1285"
-    * "ti,wl1801"
-    * "ti,wl1805"
-    * "ti,wl1807"
-    * "ti,wl1831"
-    * "ti,wl1835"
-    * "ti,wl1837"
- - interrupts : specifies attributes for the out-of-band interrupt.
-
-Optional properties:
- - ref-clock-frequency : ref clock frequency in Hz
- - tcxo-clock-frequency : tcxo clock frequency in Hz
-
-Note: the *-clock-frequency properties assume internal clocks. In case of external
-clock, new bindings (for parsing the clock nodes) have to be added.
-
-Example:
-
-&mmc3 {
-	vmmc-supply = <&wlan_en_reg>;
-	bus-width = <4>;
-	cap-power-off-card;
-	keep-power-in-suspend;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
new file mode 100644
index 000000000000..75c9489f319b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/ti,wlcore.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments Wilink 6/7/8 (wl12xx/wl18xx) Wireless LAN Controller
+
+maintainers:
+  - Tony Lindgren <tony@atomide.com>
+
+description:
+  The wl12xx/wl18xx chips can be connected via SPI or via SDIO.
+  Note that the *-clock-frequency properties assume internal clocks.  In case
+  of external clocks, new bindings (for parsing the clock nodes) have to be
+  added.
+
+properties:
+  compatible:
+    enum:
+      - ti,wl1271
+      - ti,wl1273
+      - ti,wl1281
+      - ti,wl1283
+      - ti,wl1285
+      - ti,wl1801
+      - ti,wl1805
+      - ti,wl1807
+      - ti,wl1831
+      - ti,wl1835
+      - ti,wl1837
+
+  reg:
+    maxItems: 1
+    description:
+      This is required when connected via SPI, and optional when connected via
+      SDIO.
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: irq
+      - const: wakeup
+
+  vwlan-supply:
+    description:
+      Points to the node of the regulator that powers/enable the wl12xx/wl18xx
+      chip.  This is required when connected via SPI.
+
+
+  ref-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Reference clock frequency.
+
+  tcxo-clock-frequency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TCXO clock frequency.
+
+  clock-xtal:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Indicates that the clock is generated from XTAL.
+
+required:
+  - compatible
+  - interrupts
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,wl1271
+              - ti,wl1273
+              - ti,wl1281
+              - ti,wl1283
+    then:
+      required:
+        - ref-clock-frequency
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    // For wl12xx family:
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wlcore1: wlcore@1 {
+            compatible = "ti,wl1271";
+            reg = <1>;
+            spi-max-frequency = <48000000>;
+            interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+            vwlan-supply = <&vwlan_fixed>;
+            clock-xtal;
+            ref-clock-frequency = <38400000>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    // For wl18xx family:
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wlcore2: wlcore@0 {
+            compatible = "ti,wl1835";
+            reg = <0>;
+            spi-max-frequency = <48000000>;
+            interrupts = <27 IRQ_TYPE_EDGE_RISING>;
+            vwlan-supply = <&vwlan_fixed>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    // SDIO example:
+    mmc3 {
+        vmmc-supply = <&wlan_en_reg>;
+        bus-width = <4>;
+        cap-power-off-card;
+        keep-power-in-suspend;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wlcore3: wlcore@2 {
+            compatible = "ti,wl1835";
+            reg = <2>;
+            interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
index b8e4894bc634..80e505a2fda1 100644
--- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt
+++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
@@ -26,7 +26,8 @@ Required properties:
 		  specified, the TX/RX DMA interrupts should be on that node
 		  instead, and only the Ethernet core interrupt is optionally
 		  specified here.
-- phy-handle	: Should point to the external phy device.
+- phy-handle	: Should point to the external phy device if exists. Pointing
+		  this to the PCS/PMA PHY is deprecated and should be avoided.
 		  See ethernet.txt file in the same directory.
 - xlnx,rxmem	: Set to allocated memory buffer for Rx/Tx in the hardware
 
@@ -67,6 +68,13 @@ Optional properties:
  - mdio		: Child node for MDIO bus. Must be defined if PHY access is
 		  required through the core's MDIO interface (i.e. always,
 		  unless the PHY is accessed through a different bus).
+		  Non-standard MDIO bus frequency is supported via
+		  "clock-frequency", see mdio.yaml.
+
+ - pcs-handle: 	  Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X
+		  modes, where "pcs-handle" should be used to point
+		  to the PCS/PMA PHY, and "phy-handle" should point to an
+		  external PHY if exists.
 
 Example:
 	axi_ethernet_eth: ethernet@40c00000 {
diff --git a/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
new file mode 100644
index 000000000000..92d8ade988f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/xlnx,emaclite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Emaclite Ethernet controller
+
+maintainers:
+  - Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
+  - Harini Katakam <harini.katakam@amd.com>
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - xlnx,opb-ethernetlite-1.01.a
+      - xlnx,opb-ethernetlite-1.01.b
+      - xlnx,xps-ethernetlite-1.00.a
+      - xlnx,xps-ethernetlite-2.00.a
+      - xlnx,xps-ethernetlite-2.01.a
+      - xlnx,xps-ethernetlite-3.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phy-handle: true
+
+  local-mac-address: true
+
+  xlnx,tx-ping-pong:
+    type: boolean
+    description: hardware supports tx ping pong buffer.
+
+  xlnx,rx-ping-pong:
+    type: boolean
+    description: hardware supports rx ping pong buffer.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phy-handle
+
+additionalProperties: false
+
+examples:
+  - |
+    axi_ethernetlite_1: ethernet@40e00000 {
+        compatible = "xlnx,xps-ethernetlite-3.00.a";
+        reg = <0x40e00000 0x10000>;
+        interrupt-parent = <&axi_intc_1>;
+        interrupts = <1>;
+        local-mac-address = [00 00 00 00 00 00];
+        phy-handle = <&phy0>;
+        xlnx,rx-ping-pong;
+        xlnx,tx-ping-pong;
+    };
diff --git a/Documentation/devicetree/bindings/numa.txt b/Documentation/devicetree/bindings/numa.txt
index 21b35053ca5a..42f282c2f3cc 100644
--- a/Documentation/devicetree/bindings/numa.txt
+++ b/Documentation/devicetree/bindings/numa.txt
@@ -103,7 +103,51 @@ Example:
 		};
 
 ==============================================================================
-4 - Example dts
+4 - Empty memory nodes
+==============================================================================
+
+Empty memory nodes, which no memory resides in, are allowed. There are no
+device nodes for these empty memory nodes. However, the NUMA node IDs and
+distance maps are still valid and memory may be added into them through
+hotplug afterwards.
+
+Example:
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+		numa-node-id = <0>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+		numa-node-id = <1>;
+	};
+
+	/* Empty memory node 2 and 3 */
+	distance-map {
+		compatible = "numa-distance-map-v1";
+		distance-matrix = <0 0  10>,
+				  <0 1  20>,
+				  <0 2  40>,
+				  <0 3  20>,
+				  <1 0  20>,
+				  <1 1  10>,
+				  <1 2  20>,
+				  <1 3  40>,
+				  <2 0  40>,
+				  <2 1  20>,
+				  <2 2  10>,
+				  <2 3  20>,
+				  <3 0  20>,
+				  <3 1  40>,
+				  <3 2  20>,
+				  <3 3  10>;
+	};
+
+==============================================================================
+5 - Example dts
 ==============================================================================
 
 Dual socket system consists of 2 boards connected through ccn bus and
diff --git a/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
new file mode 100644
index 000000000000..fc6555724e18
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvme/apple,nvme-ans.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvme/apple,nvme-ans.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple ANS NVM Express host controller
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-nvme-ans2
+          - apple,t8112-nvme-ans2
+          - apple,t6000-nvme-ans2
+      - const: apple,nvme-ans2
+
+  reg:
+    items:
+      - description: NVMe and NVMMU registers
+      - description: ANS2 co-processor control registers
+
+  reg-names:
+    items:
+      - const: nvme
+      - const: ans
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    # two domains for t8103, three for t6000
+    minItems: 2
+    items:
+      - description: power domain for the NVMe controller.
+      - description: power domain for the first PCIe bus connecting the NVMe
+          controller to the storage modules.
+      - description: optional power domain for the second PCIe bus
+          connecting the NVMe controller to the storage modules.
+
+  power-domain-names:
+    minItems: 2
+    items:
+      - const: ans
+      - const: apcie0
+      - const: apcie1
+
+  mboxes:
+    maxItems: 1
+    description: Mailbox of the ANS2 co-processor
+
+  interrupts:
+    maxItems: 1
+
+  apple,sart:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Reference to the SART address filter.
+
+      The SART address filter is documented in iommu/apple,sart.yaml.
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - apple,t8103-nvme-ans2
+          - apple,t8112-nvme-ans2
+then:
+  properties:
+    power-domains:
+      maxItems: 2
+    power-domain-names:
+      maxItems: 2
+else:
+  properties:
+    power-domains:
+      minItems: 3
+    power-domain-names:
+      minItems: 3
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - resets
+  - power-domains
+  - power-domain-names
+  - mboxes
+  - interrupts
+  - apple,sart
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    nvme@7bcc0000 {
+      compatible = "apple,t8103-nvme-ans2", "apple,nvme-ans2";
+      reg = <0x7bcc0000 0x40000>, <0x77400000 0x4000>;
+      reg-names = "nvme", "ans";
+      interrupts = <AIC_IRQ 590 IRQ_TYPE_LEVEL_HIGH>;
+      mboxes = <&ans>;
+      apple,sart = <&sart>;
+      power-domains = <&ps_ans2>, <&ps_apcie_st>;
+      power-domain-names = "ans", "apcie0";
+      resets = <&ps_ans2>;
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
index 6687ab720304..296001e7f498 100644
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/nvmem/allwinner,sun4i-a10-sid.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner A10 Security ID Device Tree Bindings
+title: Allwinner A10 Security ID
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Maxime Ripard <mripard@kernel.org>
 
 allOf:
-  - $ref: "nvmem.yaml#"
+  - $ref: nvmem.yaml#
 
 properties:
   compatible:
@@ -20,6 +20,7 @@ properties:
       - const: allwinner,sun7i-a20-sid
       - const: allwinner,sun8i-a83t-sid
       - const: allwinner,sun8i-h3-sid
+      - const: allwinner,sun20i-d1-sid
       - const: allwinner,sun50i-a64-sid
       - items:
           - const: allwinner,sun50i-a100-sid
diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml
new file mode 100644
index 000000000000..e49c2754ff55
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson-gxbb-efuse.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/amlogic,meson-gxbb-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson GX eFuse
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-gxbb-efuse
+      - items:
+          - const: amlogic,meson-gx-efuse
+          - const: amlogic,meson-gxbb-efuse
+
+  clocks:
+    maxItems: 1
+
+  secure-monitor:
+    description: phandle to the secure-monitor node
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - clocks
+  - secure-monitor
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse: efuse {
+        compatible = "amlogic,meson-gxbb-efuse";
+        clocks = <&clk_efuse>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        secure-monitor = <&sm>;
+
+        sn: sn@14 {
+            reg = <0x14 0x10>;
+        };
+
+        eth_mac: mac@34 {
+            reg = <0x34 0x10>;
+        };
+
+        bid: bid@46 {
+            reg = <0x46 0x30>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml
new file mode 100644
index 000000000000..84b3dfd21e09
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/amlogic,meson6-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson6 eFuse
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson6-efuse
+      - amlogic,meson8-efuse
+      - amlogic,meson8b-efuse
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: core
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse: efuse@0 {
+        compatible = "amlogic,meson6-efuse";
+        reg = <0x0 0x2000>;
+        clocks = <&clk_efuse>;
+        clock-names = "core";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ethernet_mac_address: mac@1b4 {
+            reg = <0x1b4 0x6>;
+        };
+
+        temperature_calib: calib@1f4 {
+             reg = <0x1f4 0x4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
deleted file mode 100644
index f7b3ed74db54..000000000000
--- a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-= Amlogic Meson GX eFuse device tree bindings =
-
-Required properties:
-- compatible: should be "amlogic,meson-gxbb-efuse"
-- clocks: phandle to the efuse peripheral clock provided by the
-	  clock controller.
-- secure-monitor: phandle to the secure-monitor node
-
-= Data cells =
-Are child nodes of eFuse, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
-Example:
-
-	efuse: efuse {
-		compatible = "amlogic,meson-gxbb-efuse";
-		clocks = <&clkc CLKID_EFUSE>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		secure-monitor = <&sm>;
-
-		sn: sn@14 {
-			reg = <0x14 0x10>;
-		};
-
-		eth_mac: eth_mac@34 {
-			reg = <0x34 0x10>;
-		};
-
-		bid: bid@46 {
-			reg = <0x46 0x30>;
-		};
-	};
-
-	sm: secure-monitor {
-		compatible = "amlogic,meson-gxbb-sm";
-	};
-
-= Data consumers =
-Are device nodes which consume nvmem data cells.
-
-For example:
-
-	eth_mac {
-		...
-		nvmem-cells = <&eth_mac>;
-		nvmem-cell-names = "eth_mac";
-	};
diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt
deleted file mode 100644
index a3c63954a1a4..000000000000
--- a/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Amlogic Meson6/Meson8/Meson8b efuse
-
-Required Properties:
-- compatible: depending on the SoC this should be one of:
-	- "amlogic,meson6-efuse"
-	- "amlogic,meson8-efuse"
-	- "amlogic,meson8b-efuse"
-- reg: base address and size of the efuse registers
-- clocks: a reference to the efuse core gate clock
-- clock-names: must be "core"
-
-All properties and sub-nodes as well as the consumer bindings
-defined in nvmem.txt in this directory are also supported.
-
-
-Example:
-	efuse: nvmem@0 {
-		compatible = "amlogic,meson8-efuse";
-		reg = <0x0 0x2000>;
-		clocks = <&clkc CLKID_EFUSE>;
-		clock-names = "core";
-	};
diff --git a/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml
new file mode 100644
index 000000000000..e0860b6b85f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/apple,efuses.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/apple,efuses.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SoC eFuse-based NVMEM
+
+description: |
+  Apple SoCs such as the M1 contain factory-programmed eFuses used to e.g. store
+  calibration data for the PCIe and the Type-C PHY or unique chip identifiers
+  such as the ECID.
+
+maintainers:
+  - Sven Peter <sven@svenpeter.dev>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-efuses
+          - apple,t6000-efuses
+      - const: apple,efuses
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse@3d2bc000 {
+        compatible = "apple,t8103-efuses", "apple,efuses";
+        reg = <0x3d2bc000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        ecid: efuse@500 {
+            reg = <0x500 0x8>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
index 58ff6b0bdb1a..36def7128fca 100644
--- a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
+++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
@@ -14,21 +14,45 @@ description: |
   NVRAM can be accessed on Broadcom BCM47xx MIPS and Northstar ARM Cortex-A9
   devices usiong I/O mapped memory.
 
+  NVRAM variables can be defined as NVMEM device subnodes.
+
 maintainers:
   - Rafał Miłecki <rafal@milecki.pl>
 
 allOf:
-  - $ref: "nvmem.yaml#"
+  - $ref: nvmem.yaml#
 
 properties:
   compatible:
     const: brcm,nvram
 
+  reg:
+    maxItems: 1
+
+  board_id:
+    type: object
+    description: Board identification name
+
+  et0macaddr:
+    type: object
+    description: First Ethernet interface's MAC address
+
+  et1macaddr:
+    type: object
+    description: Second Ethernet interface's MAC address
+
+  et2macaddr:
+    type: object
+    description: Third Ethernet interface's MAC address
+
 unevaluatedProperties: false
 
 examples:
   - |
     nvram@1eff0000 {
-            compatible = "brcm,nvram";
-            reg = <0x1eff0000 0x10000>;
+        compatible = "brcm,nvram";
+        reg = <0x1eff0000 0x10000>;
+
+        mac: et0macaddr {
+        };
     };
diff --git a/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml
new file mode 100644
index 000000000000..70fb2ad25103
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/fsl,layerscape-sfp.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/fsl,layerscape-sfp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Layerscape Security Fuse Processor
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  SFP is the security fuse processor which among other things provides a
+  unique identifier per part.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - description: Trust architecture 2.1 SFP
+        items:
+          - const: fsl,ls1021a-sfp
+      - description: Trust architecture 3.0 SFP
+        items:
+          - const: fsl,ls1028a-sfp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      The SFP clock. Typically, this is the platform clock divided by 4.
+
+  clock-names:
+    const: sfp
+
+  ta-prog-sfp-supply:
+    description:
+      The regulator for the TA_PROG_SFP pin. It will be enabled for programming
+      and disabled for reading.
+
+required:
+  - compatible
+  - reg
+  - clock-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+    efuse@1e80000 {
+        compatible = "fsl,ls1028a-sfp";
+        reg = <0x1e80000 0x8000>;
+        clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+                            QORIQ_CLK_PLL_DIV(4)>;
+        clock-names = "sfp";
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml
new file mode 100644
index 000000000000..f0a49283649d
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/fsl,scu-ocotp.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/fsl,scu-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - OCOTP Based on SCU Message Protocol
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+  Client nodes are maintained as children of the relevant IMX-SCU device node.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8qm-scu-ocotp
+      - fsl,imx8qxp-scu-ocotp
+
+patternProperties:
+  '^mac@[0-9a-f]*$':
+    type: object
+    description:
+      MAC address.
+
+    properties:
+      reg:
+        description:
+          Byte offset within OCOTP where the MAC address is stored
+        maxItems: 1
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ocotp {
+        compatible = "fsl,imx8qxp-scu-ocotp";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        fec_mac0: mac@2c4 {
+            reg = <0x2c4 6>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/imx-iim.yaml b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml
index 9cc43e7a4b38..e9d9d8df4811 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-iim.yaml
+++ b/Documentation/devicetree/bindings/nvmem/imx-iim.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/imx-iim.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale i.MX IC Identification Module (IIM) device tree bindings
+title: Freescale i.MX IC Identification Module (IIM)
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
@@ -14,7 +14,7 @@ description: |
   i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and i.MX53 SoCs.
 
 allOf:
-  - $ref: "nvmem.yaml#"
+  - $ref: nvmem.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
index 8a43dc1283fe..9876243ff1e8 100644
--- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/imx-ocotp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Freescale i.MX6 On-Chip OTP Controller (OCOTP) device tree bindings
+title: Freescale i.MX6 On-Chip OTP Controller (OCOTP)
 
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
@@ -15,7 +15,7 @@ description: |
   i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN and i.MX8MP SoCs.
 
 allOf:
-  - $ref: "nvmem.yaml#"
+  - $ref: nvmem.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
index 1485d3fbabfd..e89fd879c968 100644
--- a/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/ingenic,jz4780-efuse.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/nvmem/ingenic,jz4780-efuse.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ingenic JZ EFUSE driver bindings
+title: Ingenic JZ EFUSE driver
 
 maintainers:
   - PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
 
 allOf:
-  - $ref: "nvmem.yaml#"
+  - $ref: nvmem.yaml#
 
 properties:
   compatible:
@@ -33,7 +33,7 @@ unevaluatedProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/jz4780-cgu.h>
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
 
     efuse@134100d0 {
         compatible = "ingenic,jz4780-efuse";
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml b/Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml
new file mode 100644
index 000000000000..c713e23819f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/layouts/kontron,sl28-vpd.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/kontron,sl28-vpd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM layout of the Kontron SMARC-sAL28 vital product data
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description:
+  The vital product data (VPD) of the sl28 boards contains a serial
+  number and a base MAC address. The actual MAC addresses for the
+  on-board ethernet devices are derived from this base MAC address by
+  adding an offset.
+
+select: false
+
+properties:
+  compatible:
+    const: kontron,sl28-vpd
+
+  serial-number:
+    type: object
+    description: The board's serial number
+
+    additionalProperties: false
+
+  base-mac-address:
+    type: object
+    description:
+      Base MAC address for all on-module network interfaces. The first
+      argument of the phandle will be treated as an offset.
+
+    properties:
+      "#nvmem-cell-cells":
+        const: 1
+
+    additionalProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+      otp-1 {
+          compatible = "user-otp";
+
+          nvmem-layout {
+              compatible = "kontron,sl28-vpd";
+
+              serial_number: serial-number {
+              };
+
+              base_mac_address: base-mac-address {
+                  #nvmem-cell-cells = <1>;
+              };
+          };
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml
new file mode 100644
index 000000000000..8512ee538c4c
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/layouts/nvmem-layout.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/nvmem-layout.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM (Non Volatile Memory) layouts
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Michael Walle <michael@walle.cc>
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description: |
+  Most NVMEM layouts are static and thus do not require additional description
+  besides the bytes/bits offset and length. Other layouts can be less statically
+  define and might require dynamic reading of the NVMEM device in order to
+  perform their parsing. The nvmem-layout container is here to describe these.
+
+oneOf:
+  - $ref: kontron,sl28-vpd.yaml
+  - $ref: onie,tlv-layout.yaml
+
+properties:
+  compatible: true
+
+  '#address-cells': false
+
+  '#size-cells': false
+
+required:
+  - compatible
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml b/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml
new file mode 100644
index 000000000000..714a6538cc7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/layouts/onie,tlv-layout.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/layouts/onie,tlv-layout.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVMEM layout of the ONIE tlv table
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+description:
+  Modern networking hardware implementing the Open Compute Project ONIE
+  infrastructure shall provide a non-volatile memory with a table whose the
+  content is well specified and gives many information about the manufacturer
+  (name, country of manufacture, etc) as well as device caracteristics (serial
+  number, hardware version, mac addresses, etc). The underlaying device type
+  (flash, EEPROM,...) is not specified. The exact location of each value is also
+  dynamic and should be discovered at run time because it depends on the
+  parameters the manufacturer decided to embed.
+
+select: false
+
+properties:
+  compatible:
+    const: onie,tlv-layout
+
+  product-name:
+    type: object
+    additionalProperties: false
+
+  part-number:
+    type: object
+    additionalProperties: false
+
+  serial-number:
+    type: object
+    additionalProperties: false
+
+  mac-address:
+    type: object
+    description:
+      Base MAC address for all on-module network interfaces. The first
+      argument of the phandle will be treated as an offset.
+
+    properties:
+      "#nvmem-cell-cells":
+        const: 1
+
+    additionalProperties: false
+
+  manufacture-date:
+    type: object
+    additionalProperties: false
+
+  device-version:
+    type: object
+    additionalProperties: false
+
+  label-revision:
+    type: object
+    additionalProperties: false
+
+  platform-name:
+    type: object
+    additionalProperties: false
+
+  onie-version:
+    type: object
+    additionalProperties: false
+
+  num-macs:
+    type: object
+    additionalProperties: false
+
+  manufacturer:
+    type: object
+    additionalProperties: false
+
+  country-code:
+    type: object
+    additionalProperties: false
+
+  vendor:
+    type: object
+    additionalProperties: false
+
+  diag-version:
+    type: object
+    additionalProperties: false
+
+  service-tag:
+    type: object
+    additionalProperties: false
+
+  vendor-extension:
+    type: object
+    additionalProperties: false
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        eeprom@56 {
+            compatible = "atmel,24c64";
+            read-only;
+            reg = <0x56>;
+
+            nvmem-layout {
+                compatible = "onie,tlv-layout";
+
+                serial-number {
+                };
+            };
+        };
+    };
+
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        flash@0 {
+            compatible = "m25p80", "jedec,spi-nor";
+            reg = <0>;
+
+            otp {
+                compatible = "user-otp";
+
+                nvmem-layout {
+                    compatible = "onie,tlv-layout";
+
+                    mac-address {
+                        #nvmem-cell-cells = <1>;
+                    };
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
new file mode 100644
index 000000000000..d16d42fb98b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/mediatek,efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek efuse
+
+description: |
+  MediaTek's efuse is used for storing calibration data, it can be accessed
+  on ARM devices usiong I/O mapped memory.
+
+maintainers:
+  - Andrew-CT Chen <andrew-ct.chen@mediatek.com>
+  - Lala Lin <lala.lin@mediatek.com>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  $nodename:
+    pattern: "^efuse@[0-9a-f]+$"
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7622-efuse
+              - mediatek,mt7623-efuse
+              - mediatek,mt8173-efuse
+              - mediatek,mt8183-efuse
+              - mediatek,mt8186-efuse
+              - mediatek,mt8188-efuse
+              - mediatek,mt8192-efuse
+              - mediatek,mt8195-efuse
+              - mediatek,mt8516-efuse
+          - const: mediatek,efuse
+      - const: mediatek,mt8173-efuse
+        deprecated: true
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    efuse@11c10000 {
+        compatible = "mediatek,mt8195-efuse", "mediatek,efuse";
+        reg = <0x11c10000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        u3_tx_imp_p0: usb3-tx-imp@184,1 {
+            reg = <0x184 0x1>;
+            bits = <0 5>;
+        };
+        u3_rx_imp_p0: usb3-rx-imp@184,2 {
+            reg = <0x184 0x2>;
+            bits = <5 5>;
+        };
+        u3_intr_p0: usb3-intr@185 {
+            reg = <0x185 0x1>;
+            bits = <2 6>;
+        };
+        comb_tx_imp_p1: usb3-tx-imp@186,1 {
+            reg = <0x186 0x1>;
+            bits = <0 5>;
+        };
+        comb_rx_imp_p1: usb3-rx-imp@186,2 {
+            reg = <0x186 0x2>;
+            bits = <5 5>;
+        };
+        comb_intr_p1: usb3-intr@187 {
+            reg = <0x187 0x1>;
+            bits = <2 6>;
+        };
+        u2_intr_p0: usb2-intr-p0@188,1 {
+            reg = <0x188 0x1>;
+            bits = <0 5>;
+        };
+        u2_intr_p1: usb2-intr-p1@188,2 {
+            reg = <0x188 0x2>;
+            bits = <5 5>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml
new file mode 100644
index 000000000000..f97c6beb4766
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/microchip,lan9662-otpc.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/microchip,lan9662-otpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip LAN9662 OTP Controller (OTPC)
+
+maintainers:
+  - Horatiu Vultur <horatiu.vultur@microchip.com>
+
+description: |
+  OTP controller drives a NVMEM memory where system specific data
+  (e.g. hardware configuration settings, chip identifiers) or
+  user specific data could be stored.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,lan9668-otpc
+          - const: microchip,lan9662-otpc
+      - enum:
+          - microchip,lan9662-otpc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    otpc: otp@e0021000 {
+        compatible = "microchip,lan9662-otpc";
+        reg = <0xe0021000 0x300>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
new file mode 100644
index 000000000000..a296d348adb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/microchip,sama7g5-otpc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip SAMA7G5 OTP Controller (OTPC)
+
+maintainers:
+  - Claudiu Beznea <claudiu.beznea@microchip.com>
+
+description: |
+  OTP controller drives a NVMEM memory where system specific data
+  (e.g. calibration data for analog cells, hardware configuration
+  settings, chip identifiers) or user specific data could be stored.
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: microchip,sama7g5-otpc
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
+
+    otpc: efuse@e8c00000 {
+        compatible = "microchip,sama7g5-otpc", "syscon";
+        reg = <0xe8c00000 0xec>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        temperature_calib: calib@1 {
+            reg = <OTP_PKT(1) 76>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt b/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt
deleted file mode 100644
index b6791702bcfc..000000000000
--- a/Documentation/devicetree/bindings/nvmem/mtk-efuse.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-= Mediatek MTK-EFUSE device tree bindings =
-
-This binding is intended to represent MTK-EFUSE which is found in most Mediatek SOCs.
-
-Required properties:
-- compatible: should be
-	      "mediatek,mt7622-efuse", "mediatek,efuse": for MT7622
-	      "mediatek,mt7623-efuse", "mediatek,efuse": for MT7623
-	      "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173
-	      "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192
-	      "mediatek,mt8516-efuse", "mediatek,efuse": for MT8516
-- reg: Should contain registers location and length
-
-= Data cells =
-Are child nodes of MTK-EFUSE, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
-Example:
-
-	efuse: efuse@10206000 {
-		compatible = "mediatek,mt8173-efuse";
-		reg	   = <0 0x10206000 0 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* Data cells */
-		thermal_calibration: calib@528 {
-			reg = <0x528 0xc>;
-		};
-	};
-
-= Data consumers =
-Are device nodes which consume nvmem data cells.
-
-For example:
-
-	thermal {
-		...
-		nvmem-cells = <&thermal_calibration>;
-		nvmem-cell-names = "calibration";
-	};
diff --git a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
index ff317fd7c15b..8938eec22b52 100644
--- a/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/mxs-ocotp.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
 
 allOf:
-  - $ref: "nvmem.yaml#"
+  - $ref: nvmem.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml b/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml
index dbe4ffdd644c..6c26800f8b79 100644
--- a/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nintendo-otp.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/nintendo-otp.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Nintendo Wii and Wii U OTP Device Tree Bindings
+title: Nintendo Wii and Wii U OTP
 
 description: |
   This binding represents the OTP memory as found on a Nintendo Wii or Wii U,
@@ -17,7 +17,7 @@ maintainers:
   - Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
 
 allOf:
-  - $ref: "nvmem.yaml#"
+  - $ref: nvmem.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
index b1da238c8bcb..a26633bf52db 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/nvmem-consumer.yaml#
 $schema: http://devicetree.org/meta-schemas/base.yaml#
 
-title: NVMEM (Non Volatile Memory) Consumer Device Tree Bindings
+title: NVMEM (Non Volatile Memory) Consumer
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
index 456fb808100a..75bb93dda9df 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/nvmem.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: NVMEM (Non Volatile Memory) Device Tree Bindings
+title: NVMEM (Non Volatile Memory)
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
@@ -39,6 +39,13 @@ properties:
       when it's driven low (logical '0') to allow writing.
     maxItems: 1
 
+  nvmem-layout:
+    $ref: /schemas/nvmem/layouts/nvmem-layout.yaml
+    description:
+      Alternative to the statically defined nvmem cells, this
+      container may reference more advanced (dynamic) layout
+      parsers.
+
 patternProperties:
   "@[0-9a-f]+(,[0-7])?$":
     type: object
@@ -50,19 +57,15 @@ patternProperties:
           Offset and size in bytes within the storage device.
 
       bits:
-        maxItems: 1
+        $ref: /schemas/types.yaml#/definitions/uint32-array
         items:
-          items:
-            - minimum: 0
-              maximum: 7
-              description:
-                Offset in bit within the address range specified by reg.
-            - minimum: 1
-              description:
-                Size in bit within the address range specified by reg.
-
-    required:
-      - reg
+          - minimum: 0
+            maximum: 7
+            description:
+              Offset in bit within the address range specified by reg.
+          - minimum: 1
+            description:
+              Size in bit within the address range specified by reg.
 
 additionalProperties: true
 
@@ -71,6 +74,7 @@ examples:
       #include <dt-bindings/gpio/gpio.h>
 
       qfprom: eeprom@700000 {
+          compatible = "qcom,msm8974-qfprom", "qcom,qfprom";
           #address-cells = <1>;
           #size-cells = <1>;
           reg = <0x00700000 0x100000>;
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
index dede8892ee01..8d8503dd934b 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/nvmem/qcom,qfprom.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies Inc, QFPROM Efuse bindings
+title: Qualcomm Technologies Inc, QFPROM Efuse
 
 maintainers:
   - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
 
 allOf:
-  - $ref: "nvmem.yaml#"
+  - $ref: nvmem.yaml#
 
 properties:
   compatible:
@@ -18,14 +18,24 @@ properties:
       - enum:
           - qcom,apq8064-qfprom
           - qcom,apq8084-qfprom
-          - qcom,msm8974-qfprom
+          - qcom,ipq8064-qfprom
+          - qcom,ipq8074-qfprom
           - qcom,msm8916-qfprom
+          - qcom,msm8974-qfprom
+          - qcom,msm8976-qfprom
           - qcom,msm8996-qfprom
           - qcom,msm8998-qfprom
           - qcom,qcs404-qfprom
           - qcom,sc7180-qfprom
           - qcom,sc7280-qfprom
+          - qcom,sdm630-qfprom
+          - qcom,sdm670-qfprom
           - qcom,sdm845-qfprom
+          - qcom,sm6115-qfprom
+          - qcom,sm6350-qfprom
+          - qcom,sm6375-qfprom
+          - qcom,sm8150-qfprom
+          - qcom,sm8250-qfprom
       - const: qcom,qfprom
 
   reg:
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
index a835e64bc6f5..dce0c7d84ce7 100644
--- a/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,spmi-sdam.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/qcom,spmi-sdam.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Technologies, Inc. SPMI SDAM DT bindings
+title: Qualcomm Technologies, Inc. SPMI SDAM
 
 maintainers:
   - Shyam Kumar Thella <sthella@codeaurora.org>
@@ -15,7 +15,7 @@ description: |
   to/from the PBUS.
 
 allOf:
-  - $ref: "nvmem.yaml#"
+  - $ref: nvmem.yaml#
 
 properties:
   compatible:
@@ -38,49 +38,26 @@ required:
   - reg
   - ranges
 
-patternProperties:
-  "^.*@[0-9a-f]+$":
-    type: object
-
-    properties:
-      reg:
-        maxItems: 1
-        description:
-          Offset and size in bytes within the storage device.
-
-      bits:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        maxItems: 1
-        items:
-          items:
-            - minimum: 0
-              maximum: 7
-              description:
-                Offset in bit within the address range specified by reg.
-            - minimum: 1
-              description:
-                Size in bit within the address range specified by reg.
-
-    required:
-      - reg
-
-    additionalProperties: false
-
 unevaluatedProperties: false
 
 examples:
   - |
-      sdam_1: nvram@b000 {
-          #address-cells = <1>;
-          #size-cells = <1>;
-          compatible = "qcom,spmi-sdam";
-          reg = <0xb000 0x100>;
-          ranges = <0 0xb000 0x100>;
-
-          /* Data cells */
-          restart_reason: restart@50 {
-              reg = <0x50 0x1>;
-              bits = <6 2>;
-          };
-      };
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sdam_1: nvram@b000 {
+            compatible = "qcom,spmi-sdam";
+            reg = <0xb000>;
+            #address-cells = <1>;
+            #size-cells = <1>;
+            ranges = <0 0xb000 0x100>;
+
+            /* Data cells */
+            restart_reason: restart@50 {
+                reg = <0x50 0x1>;
+                bits = <6 2>;
+            };
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/nvmem/rmem.yaml b/Documentation/devicetree/bindings/nvmem/rmem.yaml
index 1d85a0a30846..38a39c9b8c1c 100644
--- a/Documentation/devicetree/bindings/nvmem/rmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/rmem.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
 
 allOf:
-  - $ref: "nvmem.yaml#"
+  - $ref: nvmem.yaml#
 
 properties:
   compatible:
@@ -19,6 +19,9 @@ properties:
           - raspberrypi,bootloader-config
       - const: nvmem-rmem
 
+  reg:
+    maxItems: 1
+
   no-map:
     $ref: /schemas/types.yaml#/definitions/flag
     description:
diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
index 104dd508565e..c5403e149080 100644
--- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.yaml
@@ -4,13 +4,13 @@
 $id: http://devicetree.org/schemas/nvmem/rockchip-efuse.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Rockchip eFuse device tree bindings
+title: Rockchip eFuse
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
 
 allOf:
-  - $ref: "nvmem.yaml#"
+  - $ref: nvmem.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml
index c819f0e90320..ec20e33d9b8f 100644
--- a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml
+++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.yaml
@@ -11,10 +11,18 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx6q-snvs-lpgpr
-      - fsl,imx6ul-snvs-lpgpr
-      - fsl,imx7d-snvs-lpgpr
+    oneOf:
+      - items:
+          - enum:
+              - fsl,imx8mm-snvs-lpgpr
+              - fsl,imx8mn-snvs-lpgpr
+              - fsl,imx8mp-snvs-lpgpr
+              - fsl,imx8mq-snvs-lpgpr
+          - const: fsl,imx7d-snvs-lpgpr
+      - enum:
+          - fsl,imx6q-snvs-lpgpr
+          - fsl,imx6ul-snvs-lpgpr
+          - fsl,imx7d-snvs-lpgpr
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
index 2578e39deda9..b8bca0599c45 100644
--- a/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/socionext,uniphier-efuse.yaml
@@ -4,14 +4,14 @@
 $id: http://devicetree.org/schemas/nvmem/socionext,uniphier-efuse.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Socionext UniPhier eFuse bindings
+title: Socionext UniPhier eFuse
 
 maintainers:
   - Keiji Hayashibara <hayashibara.keiji@socionext.com>
   - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
 
 allOf:
-  - $ref: "nvmem.yaml#"
+  - $ref: nvmem.yaml#
 
 properties:
   "#address-cells": true
@@ -31,65 +31,56 @@ unevaluatedProperties: false
 
 examples:
   - |
-    // The UniPhier eFuse should be a subnode of a "soc-glue" node.
+    efuse@100 {
+        compatible = "socionext,uniphier-efuse";
+        reg = <0x100 0x28>;
+    };
 
-    soc-glue@5f900000 {
-        compatible = "simple-mfd";
+    efuse@200 {
+        compatible = "socionext,uniphier-efuse";
+        reg = <0x200 0x68>;
         #address-cells = <1>;
         #size-cells = <1>;
-        ranges = <0x0 0x5f900000 0x2000>;
 
-        efuse@100 {
-            compatible = "socionext,uniphier-efuse";
-            reg = <0x100 0x28>;
+        /* Data cells */
+        usb_rterm0: trim@54,4 {
+            reg = <0x54 1>;
+            bits = <4 2>;
         };
-
-        efuse@200 {
-            compatible = "socionext,uniphier-efuse";
-            reg = <0x200 0x68>;
-            #address-cells = <1>;
-            #size-cells = <1>;
-
-            /* Data cells */
-            usb_rterm0: trim@54,4 {
-                reg = <0x54 1>;
-                bits = <4 2>;
-            };
-            usb_rterm1: trim@55,4 {
-                reg = <0x55 1>;
-                bits = <4 2>;
-            };
-            usb_rterm2: trim@58,4 {
-                reg = <0x58 1>;
-                bits = <4 2>;
-            };
-            usb_rterm3: trim@59,4 {
-                reg = <0x59 1>;
-                bits = <4 2>;
-            };
-            usb_sel_t0: trim@54,0 {
-                reg = <0x54 1>;
-                bits = <0 4>;
-            };
-            usb_sel_t1: trim@55,0 {
-                reg = <0x55 1>;
-                bits = <0 4>;
-            };
-            usb_sel_t2: trim@58,0 {
-                reg = <0x58 1>;
-                bits = <0 4>;
-            };
-            usb_sel_t3: trim@59,0 {
-                reg = <0x59 1>;
-                bits = <0 4>;
-            };
-            usb_hs_i0: trim@56,0 {
-                reg = <0x56 1>;
-                bits = <0 4>;
-            };
-            usb_hs_i2: trim@5a,0 {
-                reg = <0x5a 1>;
-                bits = <0 4>;
-            };
+        usb_rterm1: trim@55,4 {
+            reg = <0x55 1>;
+            bits = <4 2>;
+        };
+        usb_rterm2: trim@58,4 {
+            reg = <0x58 1>;
+            bits = <4 2>;
+        };
+        usb_rterm3: trim@59,4 {
+            reg = <0x59 1>;
+            bits = <4 2>;
+        };
+        usb_sel_t0: trim@54,0 {
+            reg = <0x54 1>;
+            bits = <0 4>;
+        };
+        usb_sel_t1: trim@55,0 {
+            reg = <0x55 1>;
+            bits = <0 4>;
+        };
+        usb_sel_t2: trim@58,0 {
+            reg = <0x58 1>;
+            bits = <0 4>;
+        };
+        usb_sel_t3: trim@59,0 {
+            reg = <0x59 1>;
+            bits = <0 4>;
+        };
+        usb_hs_i0: trim@56,0 {
+            reg = <0x56 1>;
+            bits = <0 4>;
+        };
+        usb_hs_i2: trim@5a,0 {
+            reg = <0x5a 1>;
+            bits = <0 4>;
         };
     };
diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
index 0b80ce22a2f8..a69de3e92282 100644
--- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/nvmem/st,stm32-romem.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: STMicroelectronics STM32 Factory-programmed data bindings
+title: STMicroelectronics STM32 Factory-programmed data
 
 description: |
   This represents STM32 Factory-programmed read only non-volatile area: locked
@@ -13,17 +13,21 @@ description: |
   internal vref (VREFIN_CAL), unique device ID...
 
 maintainers:
-  - Fabrice Gasnier <fabrice.gasnier@st.com>
+  - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 allOf:
-  - $ref: "nvmem.yaml#"
+  - $ref: nvmem.yaml#
 
 properties:
   compatible:
     enum:
       - st,stm32f4-otp
+      - st,stm32mp13-bsec
       - st,stm32mp15-bsec
 
+  reg:
+    maxItems: 1
+
 patternProperties:
   "^.*@[0-9a-f]+$":
     type: object
diff --git a/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
new file mode 100644
index 000000000000..8877c2283e9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/sunplus,sp7021-ocotp.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/sunplus,sp7021-ocotp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: On-Chip OTP Memory for Sunplus SP7021
+
+maintainers:
+  - Vincent Shih <vincent.sunplus@gmail.com>
+
+allOf:
+  - $ref: nvmem.yaml#
+
+properties:
+  compatible:
+    const: sunplus,sp7021-ocotp
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: hb_gpio
+      - const: otprx
+
+  clocks:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  thermal-calibration:
+    type: object
+    description: thermal calibration values
+
+  disconnect-voltage:
+    type: object
+    description: disconnect voltages of usb2 port 0 and port 1
+
+  mac-address0:
+    type: object
+    description: MAC address of ethernet port 0
+
+  mac-address1:
+    type: object
+    description: MAC address of ethernet port 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    otp: otp@9c00af00 {
+        compatible = "sunplus,sp7021-ocotp";
+        reg = <0x9c00af00 0x34>, <0x9c00af80 0x58>;
+        reg-names = "hb_gpio", "otprx";
+        clocks = <&clkc 0x15>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        therm_calib: thermal-calibration@14 {
+          reg = <0x14 0x3>;
+        };
+        disc_vol: disconnect-voltage@18 {
+          reg = <0x18 0x2>;
+        };
+        mac_addr0: mac-address0@34 {
+          reg = <0x34 0x6>;
+        };
+        mac_addr1: mac-address1@3a {
+          reg = <0x3a 0x6>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
new file mode 100644
index 000000000000..36d97fb87865
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/u-boot,env.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: U-Boot environment variables
+
+description: |
+  U-Boot uses environment variables to store device parameters and
+  configuration. They may be used for booting process, setup or keeping end user
+  info.
+
+  Data is stored using U-Boot specific formats (variant specific header and NUL
+  separated key-value pairs).
+
+  Environment data can be stored on various storage entities, e.g.:
+  1. Raw flash partition
+  2. UBI volume
+
+  This binding allows marking storage device (as containing env data) and
+  specifying used format.
+
+  Right now only flash partition case is covered but it may be extended to e.g.
+  UBI volumes in the future.
+
+  Variables can be defined as NVMEM device subnodes.
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    oneOf:
+      - description: A standalone env data block
+        const: u-boot,env
+      - description: Two redundant blocks with active one flagged
+        const: u-boot,env-redundant-bool
+      - description: Two redundant blocks with active having higher counter
+        const: u-boot,env-redundant-count
+      - description: Broadcom's variant with custom header
+        const: brcm,env
+
+  reg:
+    maxItems: 1
+
+  bootcmd:
+    type: object
+    description: Command to use for automatic booting
+
+  ethaddr:
+    type: object
+    description: Ethernet interfaces base MAC address.
+    properties:
+      "#nvmem-cell-cells":
+        description: The first argument is a MAC address offset.
+        const: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            reg = <0x0 0x40000>;
+            label = "u-boot";
+            read-only;
+        };
+
+        env: partition@40000 {
+            compatible = "u-boot,env";
+            reg = <0x40000 0x10000>;
+
+            mac: ethaddr {
+                #nvmem-cell-cells = <1>;
+            };
+        };
+    };
+  - |
+    partitions {
+        compatible = "fixed-partitions";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        partition@0 {
+            reg = <0x0 0x100000>;
+            compatible = "brcm,u-boot";
+            label = "u-boot";
+
+            partition-u-boot-env {
+                compatible = "brcm,env";
+
+                ethaddr {
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
index 729ae97b63d9..51f62c3ae194 100644
--- a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
+++ b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/opp/allwinner,sun50i-h6-operating-points.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Allwinner H6 CPU OPP Device Tree Bindings
+title: Allwinner H6 CPU OPP
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
@@ -41,7 +41,7 @@ required:
   - nvmem-cells
 
 patternProperties:
-  "opp-[0-9]+":
+  "^opp-[0-9]+$":
     type: object
 
     properties:
@@ -49,7 +49,7 @@ patternProperties:
       clock-latency-ns: true
 
     patternProperties:
-      "opp-microvolt-.*": true
+      "^opp-microvolt-speed[0-9]$": true
 
     required:
       - opp-hz
diff --git a/Documentation/devicetree/bindings/opp/opp-v1.yaml b/Documentation/devicetree/bindings/opp/opp-v1.yaml
index d585d536a3fb..07e26c267815 100644
--- a/Documentation/devicetree/bindings/opp/opp-v1.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v1.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/opp/opp-v1.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic OPP (Operating Performance Points) v1 Bindings
+title: Generic OPP (Operating Performance Points) v1
 
 maintainers:
   - Viresh Kumar <viresh.kumar@linaro.org>
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
index ae3ae4d39843..47e6f36b7637 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/opp/opp-v2-base.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic OPP (Operating Performance Points) Common Binding
+title: Generic OPP (Operating Performance Points) Common Properties
 
 maintainers:
   - Viresh Kumar <viresh.kumar@linaro.org>
@@ -33,7 +33,7 @@ properties:
     type: boolean
 
 patternProperties:
-  '^opp-?[0-9]+$':
+  '^opp(-?[0-9]+)*$':
     type: object
     description:
       One or more OPP nodes describing voltage-current-frequency combinations.
@@ -50,6 +50,16 @@ patternProperties:
           property to uniquely identify the OPP nodes exists. Devices like power
           domains must have another (implementation dependent) property.
 
+          Entries for multiple clocks shall be provided in the same field, as
+          array of frequencies.  The OPP binding doesn't provide any provisions
+          to relate the values to their clocks or the order in which the clocks
+          need to be configured and that is left for the implementation
+          specific binding.
+        minItems: 1
+        maxItems: 16
+        items:
+          maxItems: 1
+
       opp-microvolt:
         description: |
           Voltage for the OPP
@@ -93,6 +103,21 @@ patternProperties:
         minItems: 1
         maxItems: 8   # Should be enough regulators
 
+      opp-microwatt:
+        description: |
+          The power for the OPP in micro-Watts.
+
+          Entries for multiple regulators shall be provided in the same field
+          separated by angular brackets <>. If power values aren't required
+          for a regulator, then it shall be filled with 0. If power values
+          aren't required for any of the regulators, then this field is not
+          required. The OPP binding doesn't provide any provisions to relate the
+          values to their power supplies or the order in which the supplies need
+          to be configured and that is left for the implementation specific
+          binding.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
       opp-level:
         description:
           A value representing the performance level of the device.
@@ -177,6 +202,8 @@ patternProperties:
           for the functioning of the current device at the current OPP (where
           this property is present).
         $ref: /schemas/types.yaml#/definitions/phandle-array
+        items:
+          maxItems: 1
 
     patternProperties:
       '^opp-microvolt-':
@@ -203,6 +230,14 @@ patternProperties:
         minItems: 1
         maxItems: 8   # Should be enough regulators
 
+      '^opp-microwatt-':
+        description:
+          Named opp-microwatt property. Similar to opp-microamp-<name> property,
+          but for microwatt instead.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
     dependencies:
       opp-avg-kBps: [ opp-peak-kBps ]
 
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
new file mode 100644
index 000000000000..bbbad31ae4ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
@@ -0,0 +1,281 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-kryo-cpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. NVMEM OPP
+
+maintainers:
+  - Ilia Lin <ilia.lin@kernel.org>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+description: |
+  In certain Qualcomm Technologies, Inc. SoCs like APQ8096 and MSM8996,
+  the CPU frequencies subset and voltage value of each OPP varies based on
+  the silicon variant in use.
+  Qualcomm Technologies, Inc. Process Voltage Scaling Tables
+  defines the voltage and frequency value based on the speedbin blown in
+  the efuse combination.
+  The qcom-cpufreq-nvmem driver reads the efuse value from the SoC to provide
+  the OPP framework with required information (existing HW bitmap).
+  This is used to determine the voltage and frequency value for each OPP of
+  operating-points-v2 table when it is parsed by the OPP framework.
+
+properties:
+  compatible:
+    const: operating-points-v2-kryo-cpu
+
+  nvmem-cells:
+    description: |
+      A phandle pointing to a nvmem-cells node representing the
+      efuse registers that has information about the
+      speedbin that is used to select the right frequency/voltage
+      value pair.
+
+  opp-shared: true
+
+patternProperties:
+  '^opp-?[0-9]+$':
+    type: object
+    additionalProperties: false
+
+    properties:
+      opp-hz: true
+
+      opp-microvolt: true
+
+      opp-supported-hw:
+        description: |
+          A single 32 bit bitmap value, representing compatible HW.
+          Bitmap for MSM8996 format:
+          0:  MSM8996, speedbin 0
+          1:  MSM8996, speedbin 1
+          2:  MSM8996, speedbin 2
+          3:  MSM8996, speedbin 3
+          4-31:  unused
+
+          Bitmap for MSM8996SG format (speedbin shifted of 4 left):
+          0-3:  unused
+          4:  MSM8996SG, speedbin 0
+          5:  MSM8996SG, speedbin 1
+          6:  MSM8996SG, speedbin 2
+          7-31:  unused
+        enum: [0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7,
+               0x9, 0xd, 0xe, 0xf,
+               0x10, 0x20, 0x30, 0x70]
+
+      clock-latency-ns: true
+
+      required-opps: true
+
+    required:
+      - opp-hz
+
+required:
+  - compatible
+
+if:
+  required:
+    - nvmem-cells
+then:
+  patternProperties:
+    '^opp-?[0-9]+$':
+      required:
+        - opp-supported-hw
+
+additionalProperties: false
+
+examples:
+  - |
+    / {
+        model = "Qualcomm Technologies, Inc. DB820c";
+        compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cpus {
+            #address-cells = <2>;
+            #size-cells = <0>;
+
+            CPU0: cpu@0 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x0>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 0>;
+                operating-points-v2 = <&cluster0_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_0>;
+                L2_0: l2-cache {
+                    compatible = "cache";
+                    cache-level = <2>;
+                    cache-unified;
+                };
+            };
+
+            CPU1: cpu@1 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x1>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 0>;
+                operating-points-v2 = <&cluster0_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_0>;
+            };
+
+            CPU2: cpu@100 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x100>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 1>;
+                operating-points-v2 = <&cluster1_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_1>;
+                L2_1: l2-cache {
+                    compatible = "cache";
+                    cache-level = <2>;
+                    cache-unified;
+                };
+            };
+
+            CPU3: cpu@101 {
+                device_type = "cpu";
+                compatible = "qcom,kryo";
+                reg = <0x0 0x101>;
+                enable-method = "psci";
+                cpu-idle-states = <&CPU_SLEEP_0>;
+                capacity-dmips-mhz = <1024>;
+                clocks = <&kryocc 1>;
+                operating-points-v2 = <&cluster1_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
+                #cooling-cells = <2>;
+                next-level-cache = <&L2_1>;
+            };
+
+            cpu-map {
+                cluster0 {
+                    core0 {
+                        cpu = <&CPU0>;
+                    };
+
+                    core1 {
+                        cpu = <&CPU1>;
+                    };
+                };
+
+                cluster1 {
+                    core0 {
+                        cpu = <&CPU2>;
+                    };
+
+                    core1 {
+                        cpu = <&CPU3>;
+                    };
+                };
+            };
+        };
+
+        cluster0_opp: opp-table-0 {
+            compatible = "operating-points-v2-kryo-cpu";
+            nvmem-cells = <&speedbin_efuse>;
+            opp-shared;
+
+            opp-307200000 {
+                opp-hz = /bits/ 64 <307200000>;
+                opp-microvolt = <905000 905000 1140000>;
+                opp-supported-hw = <0x7>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp1>;
+            };
+            opp-1401600000 {
+                opp-hz = /bits/ 64 <1401600000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x5>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp2>;
+            };
+            opp-1593600000 {
+                opp-hz = /bits/ 64 <1593600000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x1>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp3>;
+            };
+        };
+
+        cluster1_opp: opp-table-1 {
+            compatible = "operating-points-v2-kryo-cpu";
+            nvmem-cells = <&speedbin_efuse>;
+            opp-shared;
+
+            opp-307200000 {
+                opp-hz = /bits/ 64 <307200000>;
+                opp-microvolt = <905000 905000 1140000>;
+                opp-supported-hw = <0x7>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp1>;
+            };
+            opp-1804800000 {
+                opp-hz = /bits/ 64 <1804800000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x6>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp4>;
+            };
+            opp-1900800000 {
+                opp-hz = /bits/ 64 <1900800000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x4>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp5>;
+            };
+            opp-2150400000 {
+                opp-hz = /bits/ 64 <2150400000>;
+                opp-microvolt = <1140000 905000 1140000>;
+                opp-supported-hw = <0x1>;
+                clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp6>;
+            };
+        };
+
+        smem {
+            compatible = "qcom,smem";
+            memory-region = <&smem_mem>;
+            hwlocks = <&tcsr_mutex 3>;
+        };
+
+        soc {
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            qfprom: qfprom@74000 {
+                compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
+                reg = <0x00074000 0x8ff>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                speedbin_efuse: speedbin@133 {
+                    reg = <0x133 0x1>;
+                    bits = <5 3>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
new file mode 100644
index 000000000000..a30ef93213c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2-qcom-level.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-qcom-level.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm OPP
+
+maintainers:
+  - Niklas Cassel <nks@flawful.org>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+properties:
+  compatible:
+    const: operating-points-v2-qcom-level
+
+patternProperties:
+  '^opp-?[0-9]+$':
+    type: object
+    additionalProperties: false
+
+    properties:
+      opp-level: true
+
+      qcom,opp-fuse-level:
+        description: |
+          A positive value representing the fuse corner/level associated with
+          this OPP node. Sometimes several corners/levels shares a certain fuse
+          corner/level. A fuse corner/level contains e.g. ref uV, min uV,
+          and max uV.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 2
+
+    required:
+      - opp-level
+      - qcom,opp-fuse-level
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    cpr_opp_table: opp-table-cpr {
+        compatible = "operating-points-v2-qcom-level";
+
+        cpr_opp1: opp1 {
+            opp-level = <1>;
+            qcom,opp-fuse-level = <1>;
+        };
+        cpr_opp2: opp2 {
+            opp-level = <2>;
+            qcom,opp-fuse-level = <2>;
+        };
+        cpr_opp3: opp3 {
+            opp-level = <3>;
+            qcom,opp-fuse-level = <3>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/opp/opp-v2.yaml b/Documentation/devicetree/bindings/opp/opp-v2.yaml
index eaf8fba2c691..6972d76233aa 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/opp/opp-v2.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Generic OPP (Operating Performance Points) Bindings
+title: Generic OPP (Operating Performance Points)
 
 maintainers:
   - Viresh Kumar <viresh.kumar@linaro.org>
@@ -155,7 +155,7 @@ examples:
             opp-hz = /bits/ 64 <1200000000>;
             opp-microvolt = <1025000>;
             opp-microamp = <90000>;
-            lock-latency-ns = <290000>;
+            clock-latency-ns = <290000>;
             turbo-mode;
         };
     };
diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
deleted file mode 100644
index 64f07417ecfb..000000000000
--- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
+++ /dev/null
@@ -1,796 +0,0 @@
-Qualcomm Technologies, Inc. NVMEM CPUFreq and OPP bindings
-===================================
-
-In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996,
-the CPU frequencies subset and voltage value of each OPP varies based on
-the silicon variant in use.
-Qualcomm Technologies, Inc. Process Voltage Scaling Tables
-defines the voltage and frequency value based on the msm-id in SMEM
-and speedbin blown in the efuse combination.
-The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC
-to provide the OPP framework with required information (existing HW bitmap).
-This is used to determine the voltage and frequency value for each OPP of
-operating-points-v2 table when it is parsed by the OPP framework.
-
-Required properties:
---------------------
-In 'cpu' nodes:
-- operating-points-v2: Phandle to the operating-points-v2 table to use.
-
-In 'operating-points-v2' table:
-- compatible: Should be
-	- 'operating-points-v2-kryo-cpu' for apq8096, msm8996, msm8974,
-					     apq8064, ipq8064, msm8960 and ipq8074.
-
-Optional properties:
---------------------
-In 'cpu' nodes:
-- power-domains: A phandle pointing to the PM domain specifier which provides
-		the performance states available for active state management.
-		Please refer to the power-domains bindings
-		Documentation/devicetree/bindings/power/power_domain.txt
-		and also examples below.
-- power-domain-names: Should be
-	- 'cpr' for qcs404.
-
-In 'operating-points-v2' table:
-- nvmem-cells: A phandle pointing to a nvmem-cells node representing the
-		efuse registers that has information about the
-		speedbin that is used to select the right frequency/voltage
-		value pair.
-		Please refer the for nvmem-cells
-		bindings Documentation/devicetree/bindings/nvmem/nvmem.txt
-		and also examples below.
-
-In every OPP node:
-- opp-supported-hw: A single 32 bit bitmap value, representing compatible HW.
-		    Bitmap:
-			0:	MSM8996 V3, speedbin 0
-			1:	MSM8996 V3, speedbin 1
-			2:	MSM8996 V3, speedbin 2
-			3:	unused
-			4:	MSM8996 SG, speedbin 0
-			5:	MSM8996 SG, speedbin 1
-			6:	MSM8996 SG, speedbin 2
-			7-31:	unused
-
-Example 1:
----------
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x0>;
-			enable-method = "psci";
-			clocks = <&kryocc 0>;
-			cpu-supply = <&pm8994_s11_saw>;
-			operating-points-v2 = <&cluster0_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			};
-		};
-
-		CPU1: cpu@1 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x1>;
-			enable-method = "psci";
-			clocks = <&kryocc 0>;
-			cpu-supply = <&pm8994_s11_saw>;
-			operating-points-v2 = <&cluster0_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_0>;
-		};
-
-		CPU2: cpu@100 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x100>;
-			enable-method = "psci";
-			clocks = <&kryocc 1>;
-			cpu-supply = <&pm8994_s11_saw>;
-			operating-points-v2 = <&cluster1_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_1>;
-			L2_1: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
-			};
-		};
-
-		CPU3: cpu@101 {
-			device_type = "cpu";
-			compatible = "qcom,kryo";
-			reg = <0x0 0x101>;
-			enable-method = "psci";
-			clocks = <&kryocc 1>;
-			cpu-supply = <&pm8994_s11_saw>;
-			operating-points-v2 = <&cluster1_opp>;
-			#cooling-cells = <2>;
-			next-level-cache = <&L2_1>;
-		};
-
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&CPU0>;
-				};
-
-				core1 {
-					cpu = <&CPU1>;
-				};
-			};
-
-			cluster1 {
-				core0 {
-					cpu = <&CPU2>;
-				};
-
-				core1 {
-					cpu = <&CPU3>;
-				};
-			};
-		};
-	};
-
-	cluster0_opp: opp_table0 {
-		compatible = "operating-points-v2-kryo-cpu";
-		nvmem-cells = <&speedbin_efuse>;
-		opp-shared;
-
-		opp-307200000 {
-			opp-hz = /bits/ 64 <307200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x77>;
-			clock-latency-ns = <200000>;
-		};
-		opp-384000000 {
-			opp-hz = /bits/ 64 <384000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-422400000 {
-			opp-hz = /bits/ 64 <422400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-460800000 {
-			opp-hz = /bits/ 64 <460800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-480000000 {
-			opp-hz = /bits/ 64 <480000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-537600000 {
-			opp-hz = /bits/ 64 <537600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-556800000 {
-			opp-hz = /bits/ 64 <556800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-614400000 {
-			opp-hz = /bits/ 64 <614400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-652800000 {
-			opp-hz = /bits/ 64 <652800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-691200000 {
-			opp-hz = /bits/ 64 <691200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-729600000 {
-			opp-hz = /bits/ 64 <729600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-768000000 {
-			opp-hz = /bits/ 64 <768000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-844800000 {
-			opp-hz = /bits/ 64 <844800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x77>;
-			clock-latency-ns = <200000>;
-		};
-		opp-902400000 {
-			opp-hz = /bits/ 64 <902400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-960000000 {
-			opp-hz = /bits/ 64 <960000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-979200000 {
-			opp-hz = /bits/ 64 <979200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1036800000 {
-			opp-hz = /bits/ 64 <1036800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1056000000 {
-			opp-hz = /bits/ 64 <1056000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1113600000 {
-			opp-hz = /bits/ 64 <1113600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1132800000 {
-			opp-hz = /bits/ 64 <1132800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1190400000 {
-			opp-hz = /bits/ 64 <1190400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1209600000 {
-			opp-hz = /bits/ 64 <1209600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1228800000 {
-			opp-hz = /bits/ 64 <1228800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1286400000 {
-			opp-hz = /bits/ 64 <1286400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1324800000 {
-			opp-hz = /bits/ 64 <1324800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x5>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1363200000 {
-			opp-hz = /bits/ 64 <1363200000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x72>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1401600000 {
-			opp-hz = /bits/ 64 <1401600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x5>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1440000000 {
-			opp-hz = /bits/ 64 <1440000000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1478400000 {
-			opp-hz = /bits/ 64 <1478400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1497600000 {
-			opp-hz = /bits/ 64 <1497600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x4>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1516800000 {
-			opp-hz = /bits/ 64 <1516800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1593600000 {
-			opp-hz = /bits/ 64 <1593600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x71>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1996800000 {
-			opp-hz = /bits/ 64 <1996800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x20>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2188800000 {
-			opp-hz = /bits/ 64 <2188800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x10>;
-			clock-latency-ns = <200000>;
-		};
-	};
-
-	cluster1_opp: opp_table1 {
-		compatible = "operating-points-v2-kryo-cpu";
-		nvmem-cells = <&speedbin_efuse>;
-		opp-shared;
-
-		opp-307200000 {
-			opp-hz = /bits/ 64 <307200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x77>;
-			clock-latency-ns = <200000>;
-		};
-		opp-384000000 {
-			opp-hz = /bits/ 64 <384000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-403200000 {
-			opp-hz = /bits/ 64 <403200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-460800000 {
-			opp-hz = /bits/ 64 <460800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-480000000 {
-			opp-hz = /bits/ 64 <480000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-537600000 {
-			opp-hz = /bits/ 64 <537600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-556800000 {
-			opp-hz = /bits/ 64 <556800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-614400000 {
-			opp-hz = /bits/ 64 <614400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-652800000 {
-			opp-hz = /bits/ 64 <652800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-691200000 {
-			opp-hz = /bits/ 64 <691200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-729600000 {
-			opp-hz = /bits/ 64 <729600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-748800000 {
-			opp-hz = /bits/ 64 <748800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-806400000 {
-			opp-hz = /bits/ 64 <806400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-825600000 {
-			opp-hz = /bits/ 64 <825600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-883200000 {
-			opp-hz = /bits/ 64 <883200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-902400000 {
-			opp-hz = /bits/ 64 <902400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-940800000 {
-			opp-hz = /bits/ 64 <940800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-979200000 {
-			opp-hz = /bits/ 64 <979200000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1036800000 {
-			opp-hz = /bits/ 64 <1036800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1056000000 {
-			opp-hz = /bits/ 64 <1056000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1113600000 {
-			opp-hz = /bits/ 64 <1113600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1132800000 {
-			opp-hz = /bits/ 64 <1132800000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1190400000 {
-			opp-hz = /bits/ 64 <1190400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1209600000 {
-			opp-hz = /bits/ 64 <1209600000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1248000000 {
-			opp-hz = /bits/ 64 <1248000000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1286400000 {
-			opp-hz = /bits/ 64 <1286400000>;
-			opp-microvolt = <905000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1324800000 {
-			opp-hz = /bits/ 64 <1324800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1363200000 {
-			opp-hz = /bits/ 64 <1363200000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1401600000 {
-			opp-hz = /bits/ 64 <1401600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1440000000 {
-			opp-hz = /bits/ 64 <1440000000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1478400000 {
-			opp-hz = /bits/ 64 <1478400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1516800000 {
-			opp-hz = /bits/ 64 <1516800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1555200000 {
-			opp-hz = /bits/ 64 <1555200000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1593600000 {
-			opp-hz = /bits/ 64 <1593600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1632000000 {
-			opp-hz = /bits/ 64 <1632000000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1670400000 {
-			opp-hz = /bits/ 64 <1670400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1708800000 {
-			opp-hz = /bits/ 64 <1708800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1747200000 {
-			opp-hz = /bits/ 64 <1747200000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x70>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1785600000 {
-			opp-hz = /bits/ 64 <1785600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x7>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1804800000 {
-			opp-hz = /bits/ 64 <1804800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x6>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1824000000 {
-			opp-hz = /bits/ 64 <1824000000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x71>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1900800000 {
-			opp-hz = /bits/ 64 <1900800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x74>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1920000000 {
-			opp-hz = /bits/ 64 <1920000000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1977600000 {
-			opp-hz = /bits/ 64 <1977600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x30>;
-			clock-latency-ns = <200000>;
-		};
-		opp-1996800000 {
-			opp-hz = /bits/ 64 <1996800000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2054400000 {
-			opp-hz = /bits/ 64 <2054400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x30>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2073600000 {
-			opp-hz = /bits/ 64 <2073600000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2150400000 {
-			opp-hz = /bits/ 64 <2150400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x31>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2246400000 {
-			opp-hz = /bits/ 64 <2246400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x10>;
-			clock-latency-ns = <200000>;
-		};
-		opp-2342400000 {
-			opp-hz = /bits/ 64 <2342400000>;
-			opp-microvolt = <1140000 905000 1140000>;
-			opp-supported-hw = <0x10>;
-			clock-latency-ns = <200000>;
-		};
-	};
-
-....
-
-reserved-memory {
-	#address-cells = <2>;
-	#size-cells = <2>;
-	ranges;
-....
-	smem_mem: smem-mem@86000000 {
-		reg = <0x0 0x86000000 0x0 0x200000>;
-		no-map;
-	};
-....
-};
-
-smem {
-	compatible = "qcom,smem";
-	memory-region = <&smem_mem>;
-	hwlocks = <&tcsr_mutex 3>;
-};
-
-soc {
-....
-	qfprom: qfprom@74000 {
-		compatible = "qcom,qfprom";
-		reg = <0x00074000 0x8ff>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		....
-		speedbin_efuse: speedbin@133 {
-			reg = <0x133 0x1>;
-			bits = <5 3>;
-		};
-	};
-};
-
-Example 2:
----------
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		CPU0: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x100>;
-			....
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-
-		CPU1: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x101>;
-			....
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-
-		CPU2: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x102>;
-			....
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-
-		CPU3: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x103>;
-			....
-			clocks = <&apcs_glb>;
-			operating-points-v2 = <&cpu_opp_table>;
-			power-domains = <&cpr>;
-			power-domain-names = "cpr";
-		};
-	};
-
-	cpu_opp_table: cpu-opp-table {
-		compatible = "operating-points-v2-kryo-cpu";
-		opp-shared;
-
-		opp-1094400000 {
-			opp-hz = /bits/ 64 <1094400000>;
-			required-opps = <&cpr_opp1>;
-		};
-		opp-1248000000 {
-			opp-hz = /bits/ 64 <1248000000>;
-			required-opps = <&cpr_opp2>;
-		};
-		opp-1401600000 {
-			opp-hz = /bits/ 64 <1401600000>;
-			required-opps = <&cpr_opp3>;
-		};
-	};
-
-	cpr_opp_table: cpr-opp-table {
-		compatible = "operating-points-v2-qcom-level";
-
-		cpr_opp1: opp1 {
-			opp-level = <1>;
-			qcom,opp-fuse-level = <1>;
-		};
-		cpr_opp2: opp2 {
-			opp-level = <2>;
-			qcom,opp-fuse-level = <2>;
-		};
-		cpr_opp3: opp3 {
-			opp-level = <3>;
-			qcom,opp-fuse-level = <3>;
-		};
-	};
-
-....
-
-soc {
-....
-	cpr: power-controller@b018000 {
-		compatible = "qcom,qcs404-cpr", "qcom,cpr";
-		reg = <0x0b018000 0x1000>;
-		....
-		vdd-apc-supply = <&pms405_s3>;
-		#power-domain-cells = <0>;
-		operating-points-v2 = <&cpr_opp_table>;
-		....
-	};
-};
diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt
deleted file mode 100644
index 41d3e4ff2dc3..000000000000
--- a/Documentation/devicetree/bindings/opp/qcom-opp.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-Qualcomm OPP bindings to describe OPP nodes
-
-The bindings are based on top of the operating-points-v2 bindings
-described in Documentation/devicetree/bindings/opp/opp-v2-base.yaml
-Additional properties are described below.
-
-* OPP Table Node
-
-Required properties:
-- compatible: Allow OPPs to express their compatibility. It should be:
-  "operating-points-v2-qcom-level"
-
-* OPP Node
-
-Required properties:
-- qcom,opp-fuse-level: A positive value representing the fuse corner/level
-  associated with this OPP node. Sometimes several corners/levels shares
-  a certain fuse corner/level. A fuse corner/level contains e.g. ref uV,
-  min uV, and max uV.
diff --git a/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
new file mode 100644
index 000000000000..a5bd90bc0712
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/amlogic,axg-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson AXG DWC PCIe SoC controller
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
+
+# We need a select here so we don't match all nodes with 'snps,dw-pcie'
+select:
+  properties:
+    compatible:
+      enum:
+        - amlogic,axg-pcie
+        - amlogic,g12a-pcie
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,axg-pcie
+          - amlogic,g12a-pcie
+      - const: snps,dw-pcie
+
+  reg:
+    items:
+      - description: External local bus interface registers
+      - description: Meson designed configuration registers
+      - description: PCIe configuration space
+
+  reg-names:
+    items:
+      - const: elbi
+      - const: cfg
+      - const: config
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PCIe GEN 100M PLL clock
+      - description: PCIe RC clock gate
+      - description: PCIe PHY clock
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: port
+      - const: general
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie
+
+  resets:
+    items:
+      - description: Port Reset
+      - description: Shared APB reset
+
+  reset-names:
+    items:
+      - const: port
+      - const: apb
+
+  num-lanes:
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clock
+  - clock-names
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - ranges
+  - bus-range
+  - device_type
+  - num-lanes
+  - phys
+  - phy-names
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pcie: pcie@f9800000 {
+        compatible = "amlogic,axg-pcie", "snps,dw-pcie";
+        reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>;
+        reg-names = "elbi", "cfg", "config";
+        interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&pclk>, <&clk_port>, <&clk_phy>;
+        clock-names = "pclk", "port", "general";
+        resets = <&reset_pcie_port>, <&reset_pcie_apb>;
+        reset-names = "port", "apb";
+        phys = <&pcie_phy>;
+        phy-names = "pcie";
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0 0 0 0>;
+        interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+        bus-range = <0x0 0xff>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        num-lanes = <1>;
+        ranges = <0x82000000 0 0 0xf9c00000 0 0x00300000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
deleted file mode 100644
index c3a75ac6e59d..000000000000
--- a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-Amlogic Meson AXG DWC PCIE SoC controller
-
-Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
-It shares common functions with the PCIe DesignWare core driver and
-inherits common properties defined in
-Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
-
-Additional properties are described here:
-
-Required properties:
-- compatible:
-	should contain :
-	- "amlogic,axg-pcie" for AXG SoC Family
-	- "amlogic,g12a-pcie" for G12A SoC Family
-	to identify the core.
-- reg:
-	should contain the configuration address space.
-- reg-names: Must be
-	- "elbi"	External local bus interface registers
-	- "cfg"		Meson specific registers
-	- "config"	PCIe configuration space
-- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Must include the following entries:
-	- "pclk"       PCIe GEN 100M PLL clock
-	- "port"       PCIe_x(A or B) RC clock gate
-	- "general"    PCIe Phy clock
-- resets: phandle to the reset lines.
-- reset-names: must contain "port" and "apb"
-       - "port"        Port A or B reset
-       - "apb"         Share APB reset
-- phys: should contain a phandle to the PCIE phy
-- phy-names: must contain "pcie"
-
-- device_type:
-	should be "pci". As specified in snps,dw-pcie.yaml
-
-
-Example configuration:
-
-	pcie: pcie@f9800000 {
-			compatible = "amlogic,axg-pcie", "snps,dw-pcie";
-			reg = <0x0 0xf9800000 0x0 0x400000
-					0x0 0xff646000 0x0 0x2000
-					0x0 0xf9f00000 0x0 0x100000>;
-			reg-names = "elbi", "cfg", "config";
-			reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
-			interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0>;
-			interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
-			bus-range = <0x0 0xff>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-			device_type = "pci";
-			ranges = <0x82000000 0 0 0x0 0xf9c00000 0 0x00300000>;
-
-			clocks = <&clkc CLKID_USB
-					&clkc CLKID_PCIE_A
-					&clkc CLKID_PCIE_CML_EN0>;
-			clock-names = "general",
-					"pclk",
-					"port";
-			resets = <&reset RESET_PCIE_A>,
-				<&reset RESET_PCIE_APB>;
-			reset-names = "port",
-					"apb";
-			phys = <&pcie_phy>;
-			phy-names = "pcie";
-	};
diff --git a/Documentation/devicetree/bindings/pci/apple,pcie.yaml b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
new file mode 100644
index 000000000000..215ff9a9c835
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/apple,pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple PCIe host controller
+
+maintainers:
+  - Mark Kettenis <kettenis@openbsd.org>
+
+description: |
+  The Apple PCIe host controller is a PCIe host controller with
+  multiple root ports present in Apple ARM SoC platforms, including
+  various iPhone and iPad devices and the "Apple Silicon" Macs.
+  The controller incorporates Synopsys DesigWare PCIe logic to
+  implements its root ports.  But the ATU found on most DesignWare
+  PCIe host bridges is absent.
+
+  All root ports share a single ECAM space, but separate GPIOs are
+  used to take the PCI devices on those ports out of reset.  Therefore
+  the standard "reset-gpios" and "max-link-speed" properties appear on
+  the child nodes that represent the PCI bridges that correspond to
+  the individual root ports.
+
+  MSIs are handled by the PCIe controller and translated into regular
+  interrupts.  A range of 32 MSIs is provided.  These 32 MSIs can be
+  distributed over the root ports as the OS sees fit by programming
+  the PCIe controller's port registers.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - apple,t8103-pcie
+          - apple,t8112-pcie
+          - apple,t6000-pcie
+      - const: apple,pcie
+
+  reg:
+    minItems: 3
+    maxItems: 6
+
+  reg-names:
+    minItems: 3
+    items:
+      - const: config
+      - const: rc
+      - const: port0
+      - const: port1
+      - const: port2
+      - const: port3
+
+  ranges:
+    minItems: 2
+    maxItems: 2
+
+  interrupts:
+    description:
+      Interrupt specifiers, one for each root port.
+    minItems: 1
+    maxItems: 4
+
+  msi-parent: true
+
+  msi-ranges:
+    maxItems: 1
+
+  iommu-map: true
+  iommu-map-mask: true
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - bus-range
+  - interrupts
+  - msi-controller
+  - msi-parent
+  - msi-ranges
+
+unevaluatedProperties: false
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: apple,t8103-pcie
+    then:
+      properties:
+        reg:
+          maxItems: 5
+        interrupts:
+          maxItems: 3
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/apple-aic.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      pcie0: pcie@690000000 {
+        compatible = "apple,t8103-pcie", "apple,pcie";
+        device_type = "pci";
+
+        reg = <0x6 0x90000000 0x0 0x1000000>,
+              <0x6 0x80000000 0x0 0x100000>,
+              <0x6 0x81000000 0x0 0x4000>,
+              <0x6 0x82000000 0x0 0x4000>,
+              <0x6 0x83000000 0x0 0x4000>;
+        reg-names = "config", "rc", "port0", "port1", "port2";
+
+        interrupt-parent = <&aic>;
+        interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>,
+                     <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>;
+
+        msi-controller;
+        msi-parent = <&pcie0>;
+        msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>;
+
+        iommu-map = <0x100 &dart0 1 1>,
+                    <0x200 &dart1 1 1>,
+                    <0x300 &dart2 1 1>;
+        iommu-map-mask = <0xff00>;
+
+        bus-range = <0 3>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
+                 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
+
+        power-domains = <&ps_apcie_gp>;
+        pinctrl-0 = <&pcie_pins>;
+        pinctrl-names = "default";
+
+        pci@0,0 {
+          device_type = "pci";
+          reg = <0x0 0x0 0x0 0x0 0x0>;
+          reset-gpios = <&pinctrl_ap 152 0>;
+
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+        };
+
+        pci@1,0 {
+          device_type = "pci";
+          reg = <0x800 0x0 0x0 0x0 0x0>;
+          reset-gpios = <&pinctrl_ap 153 0>;
+
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+        };
+
+        pci@2,0 {
+          device_type = "pci";
+          reg = <0x1000 0x0 0x0 0x0 0x0>;
+          reset-gpios = <&pinctrl_ap 33 0>;
+
+          #address-cells = <3>;
+          #size-cells = <2>;
+          ranges;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml
new file mode 100644
index 000000000000..8eaa07ae9774
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/baikal,bt1-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 PCIe Root Port Controller
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+  Embedded into Baikal-T1 SoC Root Complex controller with a single port
+  activated. It's based on the DWC RC PCIe v4.60a IP-core, which is configured
+  to have just a single Root Port function and is capable of establishing the
+  link up to Gen.3 speed on x4 lanes. It doesn't have embedded clock and reset
+  control module, so the proper interface initialization is supposed to be
+  performed by software. There four in- and four outbound iATU regions
+  which can be used to emit all required TLP types on the PCIe bus.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: baikal,bt1-pcie
+
+  reg:
+    description:
+      DBI, DBI2 and at least 4KB outbound iATU-capable region for the
+      peripheral devices CFG-space access.
+    maxItems: 3
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: config
+
+  interrupts:
+    description:
+      MSI, AER, PME, Hot-plug, Link Bandwidth Management, Link Equalization
+      request and eight Read/Write eDMA IRQ lines are available.
+    maxItems: 14
+
+  interrupt-names:
+    items:
+      - const: dma0
+      - const: dma1
+      - const: dma2
+      - const: dma3
+      - const: dma4
+      - const: dma5
+      - const: dma6
+      - const: dma7
+      - const: msi
+      - const: aer
+      - const: pme
+      - const: hp
+      - const: bw_mg
+      - const: l_eq
+
+  clocks:
+    description:
+      DBI (attached to the APB bus), AXI-bus master and slave interfaces
+      are fed up by the dedicated application clocks. A common reference
+      clock signal is supposed to be attached to the corresponding Ref-pad
+      of the SoC. It will be redistributed amongst the controller core
+      sub-modules (pipe, core, aux, etc).
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: dbi
+      - const: mstr
+      - const: slv
+      - const: ref
+
+  resets:
+    description:
+      A comprehensive controller reset logic is supposed to be implemented
+      by software, so almost all the possible application and core reset
+      signals are exposed via the system CCU module.
+    maxItems: 9
+
+  reset-names:
+    items:
+      - const: mstr
+      - const: slv
+      - const: pwr
+      - const: hot
+      - const: phy
+      - const: core
+      - const: pipe
+      - const: sticky
+      - const: non-sticky
+
+  baikal,bt1-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the Baikal-T1 System Controller DT node. It's required to
+      access some additional PM, Reset-related and LTSSM signals.
+
+  num-lanes:
+    maximum: 4
+
+  max-link-speed:
+    maximum: 3
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    pcie@1f052000 {
+      compatible = "baikal,bt1-pcie";
+      device_type = "pci";
+      reg = <0x1f052000 0x1000>, <0x1f053000 0x1000>, <0x1bdbf000 0x1000>;
+      reg-names = "dbi", "dbi2", "config";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0x00000000 0x1bdb0000 0 0x00008000>,
+               <0x82000000 0 0x20000000 0x08000000 0 0x13db0000>;
+      bus-range = <0x0 0xff>;
+
+      interrupts = <GIC_SHARED 80 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 81 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 82 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 83 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 84 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 85 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 86 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 87 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 88 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 89 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 90 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 91 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 92 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SHARED 93 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "dma0", "dma1", "dma2", "dma3",
+                        "dma4", "dma5", "dma6", "dma7",
+                        "msi", "aer", "pme", "hp", "bw_mg",
+                        "l_eq";
+
+      clocks = <&ccu_sys 1>, <&ccu_axi 6>, <&ccu_axi 7>, <&clk_pcie>;
+      clock-names = "dbi", "mstr", "slv", "ref";
+
+      resets = <&ccu_axi 6>, <&ccu_axi 7>, <&ccu_sys 7>, <&ccu_sys 10>,
+               <&ccu_sys 4>, <&ccu_sys 6>, <&ccu_sys 5>, <&ccu_sys 8>,
+               <&ccu_sys 9>;
+      reset-names = "mstr", "slv", "pwr", "hot", "phy", "core", "pipe",
+                    "sticky", "non-sticky";
+
+      reset-gpios = <&port0 0 GPIO_ACTIVE_LOW>;
+
+      num-lanes = <4>;
+      max-link-speed = <3>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
deleted file mode 100644
index df065aa53a83..000000000000
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+++ /dev/null
@@ -1,133 +0,0 @@
-* Broadcom iProc PCIe controller with the platform bus interface
-
-Required properties:
-- compatible:
-      "brcm,iproc-pcie" for the first generation of PAXB based controller,
-used in SoCs including NSP, Cygnus, NS2, and Pegasus
-      "brcm,iproc-pcie-paxb-v2" for the second generation of PAXB-based
-controllers, used in Stingray
-      "brcm,iproc-pcie-paxc" for the first generation of PAXC based
-controller, used in NS2
-      "brcm,iproc-pcie-paxc-v2" for the second generation of PAXC based
-controller, used in Stingray
-  PAXB-based root complex is used for external endpoint devices. PAXC-based
-root complex is connected to emulated endpoint devices internal to the ASIC
-- reg: base address and length of the PCIe controller I/O register space
-- #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map, standard PCI properties to define the
-  mapping of the PCIe interface to interrupt numbers
-- linux,pci-domain: PCI domain ID. Should be unique for each host controller
-- bus-range: PCI bus numbers covered
-- #address-cells: set to <3>
-- #size-cells: set to <2>
-- device_type: set to "pci"
-- ranges: ranges for the PCI memory and I/O regions
-
-Optional properties:
-- phys: phandle of the PCIe PHY device
-- phy-names: must be "pcie-phy"
-- dma-coherent: present if DMA operations are coherent
-- dma-ranges: Some PAXB-based root complexes do not have inbound mapping done
-  by the ASIC after power on reset.  In this case, SW is required to configure
-the mapping, based on inbound memory regions specified by this property.
-
-- brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done
-by the ASIC after power on reset. In this case, SW needs to configure it
-
-If the brcm,pcie-ob property is present, the following properties become
-effective:
-
-Required:
-- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal
-address used by the iProc PCIe core (not the PCIe address)
-
-MSI support (optional):
-
-For older platforms without MSI integrated in the GIC, iProc PCIe core provides
-an event queue based MSI support.  The iProc MSI uses host memories to store
-MSI posted writes in the event queues
-
-On newer iProc platforms, gicv2m or gicv3-its based MSI support should be used
-
-- msi-map: Maps a Requester ID to an MSI controller and associated MSI
-sideband data
-
-- msi-parent: Link to the device node of the MSI controller, used when no MSI
-sideband data is passed between the iProc PCIe controller and the MSI
-controller
-
-Refer to the following binding documents for more detailed description on
-the use of 'msi-map' and 'msi-parent':
-  Documentation/devicetree/bindings/pci/pci-msi.txt
-  Documentation/devicetree/bindings/interrupt-controller/msi.txt
-
-When the iProc event queue based MSI is used, one needs to define the
-following properties in the MSI device node:
-- compatible: Must be "brcm,iproc-msi"
-- msi-controller: claims itself as an MSI controller
-- interrupts: List of interrupt IDs from its parent interrupt device
-
-Optional properties:
-- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
-require the interrupt enable registers to be set explicitly to enable MSI
-
-Example:
-	pcie0: pcie@18012000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18012000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
-
-		linux,pci-domain = <0>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
-			  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
-
-		phys = <&phy 0 5>;
-		phy-names = "pcie-phy";
-
-		brcm,pcie-ob;
-		brcm,pcie-ob-axi-offset = <0x00000000>;
-
-		msi-parent = <&msi0>;
-
-		/* iProc event queue based MSI */
-		msi0: msi@18012000 {
-			compatible = "brcm,iproc-msi";
-			msi-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
-				     <GIC_SPI 97 IRQ_TYPE_NONE>,
-				     <GIC_SPI 98 IRQ_TYPE_NONE>,
-				     <GIC_SPI 99 IRQ_TYPE_NONE>,
-		};
-	};
-
-	pcie1: pcie@18013000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18013000 0x1000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
-
-		linux,pci-domain = <1>;
-
-		bus-range = <0x00 0xff>;
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
-			  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
-
-		phys = <&phy 1 6>;
-		phy-names = "pcie-phy";
-	};
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
new file mode 100644
index 000000000000..0972868735fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,iproc-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc PCIe controller with the platform bus interface
+
+maintainers:
+  - Ray Jui <ray.jui@broadcom.com>
+  - Scott Branden <scott.branden@broadcom.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          # for the first generation of PAXB based controller, used in SoCs
+          # including NSP, Cygnus, NS2, and Pegasus
+          - brcm,iproc-pcie
+          # for the second generation of PAXB-based controllers, used in
+          # Stingray
+          - brcm,iproc-pcie-paxb-v2
+          # For the first generation of PAXC based controller, used in NS2
+          - brcm,iproc-pcie-paxc
+          # For the second generation of PAXC based controller, used in Stingray
+          - brcm,iproc-pcie-paxc-v2
+
+  reg:
+    maxItems: 1
+    description: >
+       Base address and length of the PCIe controller I/O register space
+
+  interrupt-map: true
+
+  interrupt-map-mask: true
+
+  "#interrupt-cells":
+    const: 1
+
+  ranges:
+    minItems: 1
+    maxItems: 2
+    description: >
+      Ranges for the PCI memory and I/O regions
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pcie-phy
+
+  bus-range: true
+
+  dma-coherent: true
+
+  "#address-cells": true
+
+  "#size-cells": true
+
+  device_type: true
+
+  brcm,pcie-ob:
+    type: boolean
+    description: >
+      Some iProc SoCs do not have the outbound address mapping done by the
+      ASIC after power on reset. In this case, SW needs to configure it
+
+  brcm,pcie-ob-axi-offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+       The offset from the AXI address to the internal address used by the
+       iProc PCIe core (not the PCIe address)
+
+  msi:
+    type: object
+    properties:
+      compatible:
+        items:
+          - const: brcm,iproc-msi
+
+  msi-parent: true
+
+  msi-controller: true
+
+  brcm,pcie-msi-inten:
+    type: boolean
+    description: >
+      Needs to be present for some older iProc platforms that require the
+      interrupt enable registers to be set explicitly to enable MSI
+
+dependencies:
+  brcm,pcie-ob-axi-offset: ["brcm,pcie-ob"]
+  brcm,pcie-msi-inten: [msi-controller]
+
+required:
+  - compatible
+  - reg
+  - ranges
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - brcm,iproc-pcie
+then:
+  required:
+    - interrupt-map
+    - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+   bus {
+      #address-cells = <1>;
+      #size-cells = <1>;
+           pcie0: pcie@18012000 {
+              compatible = "brcm,iproc-pcie";
+              reg = <0x18012000 0x1000>;
+
+              #interrupt-cells = <1>;
+              interrupt-map-mask = <0 0 0 0>;
+              interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+
+              linux,pci-domain = <0>;
+
+              bus-range = <0x00 0xff>;
+
+              #address-cells = <3>;
+              #size-cells = <2>;
+              device_type = "pci";
+              ranges = <0x81000000 0 0     0x28000000 0 0x00010000>,
+                   <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+              phys = <&phy 0 5>;
+              phy-names = "pcie-phy";
+
+              brcm,pcie-ob;
+              brcm,pcie-ob-axi-offset = <0x00000000>;
+
+              msi-parent = <&msi0>;
+
+              /* iProc event queue based MSI */
+              msi0: msi {
+                 compatible = "brcm,iproc-msi";
+                 msi-controller;
+                 interrupt-parent = <&gic>;
+                 interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+                         <GIC_SPI 97 IRQ_TYPE_NONE>,
+                         <GIC_SPI 98 IRQ_TYPE_NONE>,
+                         <GIC_SPI 99 IRQ_TYPE_NONE>;
+              };
+           };
+
+           pcie1: pcie@18013000 {
+              compatible = "brcm,iproc-pcie";
+              reg = <0x18013000 0x1000>;
+
+              #interrupt-cells = <1>;
+              interrupt-map-mask = <0 0 0 0>;
+              interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+
+              linux,pci-domain = <1>;
+
+              bus-range = <0x00 0xff>;
+
+              #address-cells = <3>;
+              #size-cells = <2>;
+              device_type = "pci";
+              ranges = <0x81000000 0 0     0x48000000 0 0x00010000>,
+                   <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+              phys = <&phy 1 6>;
+              phy-names = "pcie-phy";
+           };
+    };
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index b9589a0daa5c..7e15aae7d69e 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Brcmstb PCIe Host Controller Device Tree Bindings
+title: Brcmstb PCIe Host Controller
 
 maintainers:
   - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
@@ -19,6 +19,8 @@ properties:
           - brcm,bcm7278-pcie # Broadcom 7278 Arm
           - brcm,bcm7216-pcie # Broadcom 7216 Arm
           - brcm,bcm7445-pcie # Broadcom 7445 Arm
+          - brcm,bcm7425-pcie # Broadcom 7425 MIPs
+          - brcm,bcm7435-pcie # Broadcom 7435 MIPs
 
   reg:
     maxItems: 1
@@ -76,6 +78,7 @@ properties:
       maxItems: 3
 
 required:
+  - compatible
   - reg
   - ranges
   - dma-ranges
@@ -88,6 +91,7 @@ required:
 
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
   - if:
       properties:
         compatible:
@@ -142,11 +146,15 @@ examples:
                     #address-cells = <3>;
                     #size-cells = <2>;
                     #interrupt-cells = <1>;
-                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                    interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
                                  <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
                     interrupt-names = "pcie", "msi";
                     interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+
                     msi-parent = <&pcie0>;
                     msi-controller;
                     ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
@@ -154,5 +162,24 @@ examples:
                                  <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
                     brcm,enable-ssc;
                     brcm,scb-sizes =  <0x0000000080000000 0x0000000080000000>;
+
+                    /* PCIe bridge, Root Port */
+                    pci@0,0 {
+                            #address-cells = <3>;
+                            #size-cells = <2>;
+                            reg = <0x0 0x0 0x0 0x0 0x0>;
+                            compatible = "pciclass,0604";
+                            device_type = "pci";
+                            vpcie3v3-supply = <&vreg7>;
+                            ranges;
+
+                            /* PCIe endpoint */
+                            pci-ep@0,0 {
+                                    assigned-addresses =
+                                        <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
+                                    reg = <0x0 0x0 0x0 0x0 0x0>;
+                                    compatible = "pci14e4,1688";
+                            };
+                    };
             };
     };
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
index 651eee88989d..98651ab22103 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
@@ -10,8 +10,7 @@ maintainers:
   - Tom Joseph <tjoseph@cadence.com>
 
 allOf:
-  - $ref: "cdns-pcie-ep.yaml#"
-  - $ref: "pci-ep.yaml#"
+  - $ref: cdns-pcie-ep.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
index 293b8ec318bc..bc3c48f60fff 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
@@ -11,7 +11,7 @@ maintainers:
 
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
-  - $ref: "cdns-pcie-host.yaml#"
+  - $ref: cdns-pcie-host.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
index 21e8a8849076..47a302ba4ac9 100644
--- a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Cadence PCIe Device
 
@@ -10,7 +10,8 @@ maintainers:
   - Tom Joseph <tjoseph@cadence.com>
 
 allOf:
-  - $ref: "cdns-pcie.yaml#"
+  - $ref: cdns-pcie.yaml#
+  - $ref: pci-ep.yaml#
 
 properties:
   cdns,max-outbound-regions:
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
index a944f9bfffff..a6b494401ebb 100644
--- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Cadence PCIe Host
 
@@ -10,8 +10,8 @@ maintainers:
   - Tom Joseph <tjoseph@cadence.com>
 
 allOf:
-  - $ref: "/schemas/pci/pci-bus.yaml#"
-  - $ref: "cdns-pcie.yaml#"
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: cdns-pcie.yaml#
 
 properties:
   cdns,max-outbound-regions:
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
index df4fe28222b0..2e14f422e829 100644
--- a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/pci/cdns-pcie.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/pci/cdns-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Cadence PCIe Core
 
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
new file mode 100644
index 000000000000..d91b639ae7ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
@@ -0,0 +1,270 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 PCIe RC/EP controller
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+description:
+  Generic Freescale i.MX PCIe Root Port and Endpoint controller
+  properties.
+
+properties:
+  clocks:
+    minItems: 3
+    maxItems: 4
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+
+  num-lanes:
+    const: 1
+
+  fsl,imx7d-pcie-phy:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: A phandle to an fsl,imx7d-pcie-phy node. Additional
+      required properties for imx7d-pcie, imx7d-pcie-ep, imx8mq-pcie,
+      and imx8mq-pcie-ep.
+
+  power-domains:
+    minItems: 1
+    items:
+      - description: The phandle pointing to the DISPLAY domain for
+          imx6sx-pcie, imx6sx-pcie-ep, to PCIE_PHY power domain for
+          imx7d-pcie, imx7d-pcie-ep, imx8mq-pcie and imx8mq-pcie-ep.
+      - description: The phandle pointing to the PCIE_PHY power domains
+          for imx6sx-pcie and imx6sx-pcie-ep.
+
+  power-domain-names:
+    minItems: 1
+    items:
+      - const: pcie
+      - const: pcie_phy
+
+  resets:
+    minItems: 2
+    maxItems: 3
+    description: Phandles to PCIe-related reset lines exposed by SRC
+      IP block. Additional required by imx7d-pcie, imx7d-pcie-ep,
+      imx8mq-pcie, and imx8mq-pcie-ep.
+
+  reset-names:
+    minItems: 2
+    maxItems: 3
+
+  fsl,tx-deemph-gen1:
+    description: Gen1 De-emphasis value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,tx-deemph-gen2-3p5db:
+    description: Gen2 (3.5db) De-emphasis value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  fsl,tx-deemph-gen2-6db:
+    description: Gen2 (6db) De-emphasis value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 20
+
+  fsl,tx-swing-full:
+    description: Gen2 TX SWING FULL value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 127
+
+  fsl,tx-swing-low:
+    description: TX launch amplitude swing_low value (optional required).
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 127
+
+  fsl,max-link-speed:
+    description: Specify PCI Gen for link capability (optional required).
+      Note that the IMX6 LVDS clock outputs do not meet gen2 jitter
+      requirements and thus for gen2 capability a gen2 compliant clock
+      generator should be used and configured.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3, 4]
+    default: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  vpcie-supply:
+    description: Should specify the regulator in charge of PCIe port power.
+      The regulator will be enabled when initializing the PCIe host and
+      disabled either as part of the init process or when shutting down
+      the host (optional required).
+
+  vph-supply:
+    description: Should specify the regulator in charge of VPH one of
+      the three PCIe PHY powers. This regulator can be supplied by both
+      1.8v and 3.3v voltage supplies (optional required).
+
+required:
+  - clocks
+  - clock-names
+  - num-lanes
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6sx-pcie
+              - fsl,imx6sx-pcie-ep
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - const: pcie_phy
+            - const: pcie_inbound_axi
+        power-domains:
+          minItems: 2
+        power-domain-names:
+          minItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mq-pcie
+              - fsl,imx8mq-pcie-ep
+    then:
+      properties:
+        clock-names:
+          items:
+            - {}
+            - {}
+            - const: pcie_phy
+            - const: pcie_aux
+  - if:
+      properties:
+        compatible:
+          not:
+            contains:
+              enum:
+                - fsl,imx6sx-pcie
+                - fsl,imx8mq-pcie
+                - fsl,imx6sx-pcie-ep
+                - fsl,imx8mq-pcie-ep
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          maxItems: 3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-pcie
+              - fsl,imx6qp-pcie
+              - fsl,imx7d-pcie
+              - fsl,imx6q-pcie-ep
+              - fsl,imx6qp-pcie-ep
+              - fsl,imx7d-pcie-ep
+    then:
+      properties:
+        clock-names:
+          maxItems: 3
+          contains:
+            const: pcie_phy
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8mm-pcie
+              - fsl,imx8mp-pcie
+              - fsl,imx8mm-pcie-ep
+              - fsl,imx8mp-pcie-ep
+    then:
+      properties:
+        clock-names:
+          maxItems: 3
+          contains:
+            const: pcie_aux
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-pcie
+              - fsl,imx6qp-pcie
+              - fsl,imx6q-pcie-ep
+              - fsl,imx6qp-pcie-ep
+    then:
+      properties:
+        power-domains: false
+        power-domain-names: false
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - fsl,imx6sx-pcie
+                - fsl,imx6q-pcie
+                - fsl,imx6qp-pcie
+                - fsl,imx6sx-pcie-ep
+                - fsl,imx6q-pcie-ep
+                - fsl,imx6qp-pcie-ep
+    then:
+      properties:
+        power-domains:
+          maxItems: 1
+        power-domain-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx6q-pcie
+              - fsl,imx6sx-pcie
+              - fsl,imx6qp-pcie
+              - fsl,imx7d-pcie
+              - fsl,imx8mq-pcie
+              - fsl,imx6q-pcie-ep
+              - fsl,imx6sx-pcie-ep
+              - fsl,imx6qp-pcie-ep
+              - fsl,imx7d-pcie-ep
+              - fsl,imx8mq-pcie-ep
+    then:
+      properties:
+        resets:
+          minItems: 3
+        reset-names:
+          items:
+            - const: pciephy
+            - const: apps
+            - const: turnoff
+    else:
+      properties:
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: apps
+            - const: turnoff
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
new file mode 100644
index 000000000000..ee155ed5f181
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 PCIe Endpoint controller
+
+maintainers:
+  - Lucas Stach <l.stach@pengutronix.de>
+  - Richard Zhu <hongxing.zhu@nxp.com>
+
+description: |+
+  This PCIe controller is based on the Synopsys DesignWare PCIe IP and
+  thus inherits all the common properties defined in snps,dw-pcie-ep.yaml.
+  The controller instances are dual mode where in they can work either in
+  Root Port mode or Endpoint mode but one at a time.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mm-pcie-ep
+      - fsl,imx8mq-pcie-ep
+      - fsl,imx8mp-pcie-ep
+
+  reg:
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: addr_space
+
+  clocks:
+    minItems: 3
+    items:
+      - description: PCIe bridge clock.
+      - description: PCIe bus clock.
+      - description: PCIe PHY clock.
+      - description: Additional required clock entry for imx6sx-pcie,
+           imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep.
+
+  clock-names:
+    minItems: 3
+    maxItems: 4
+
+  interrupts:
+    items:
+      - description: builtin eDMA interrupter.
+
+  interrupt-names:
+    items:
+      - const: dma
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+  - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mq-pcie-ep
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_phy
+            - const: pcie_aux
+    else:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_aux
+
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mp-clock.h>
+    #include <dt-bindings/power/imx8mp-power.h>
+    #include <dt-bindings/reset/imx8mp-reset.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pcie_ep: pcie-ep@33800000 {
+      compatible = "fsl,imx8mp-pcie-ep";
+      reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>;
+      reg-names = "dbi", "addr_space";
+      clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+               <&clk IMX8MP_CLK_HSIO_AXI>,
+               <&clk IMX8MP_CLK_PCIE_ROOT>;
+      clock-names = "pcie", "pcie_bus", "pcie_aux";
+      assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+      assigned-clock-rates = <10000000>;
+      assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+      num-lanes = <1>;
+      interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* eDMA */
+      interrupt-names = "dma";
+      fsl,max-link-speed = <3>;
+      power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+      resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+               <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+      reset-names = "apps", "turnoff";
+      phys = <&pcie_phy>;
+      phy-names = "pcie-phy";
+      num-ib-windows = <4>;
+      num-ob-windows = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index acea1cd444fd..81bbb8728f0f 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -13,9 +13,11 @@ maintainers:
 description: |+
   This PCIe host controller is based on the Synopsys DesignWare PCIe IP
   and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+  The controller instances are dual mode where in they can work either in
+  Root Port mode or Endpoint mode but one at a time.
 
-allOf:
-  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  See fsl,imx6q-pcie-ep.yaml for details on the Endpoint mode device tree
+  bindings.
 
 properties:
   compatible:
@@ -25,6 +27,8 @@ properties:
       - fsl,imx6qp-pcie
       - fsl,imx7d-pcie
       - fsl,imx8mq-pcie
+      - fsl,imx8mm-pcie
+      - fsl,imx8mp-pcie
 
   reg:
     items:
@@ -36,14 +40,6 @@ properties:
       - const: dbi
       - const: config
 
-  interrupts:
-    items:
-      - description: builtin MSI controller.
-
-  interrupt-names:
-    items:
-      - const: msi
-
   clocks:
     minItems: 3
     items:
@@ -51,81 +47,19 @@ properties:
       - description: PCIe bus clock.
       - description: PCIe PHY clock.
       - description: Additional required clock entry for imx6sx-pcie,
-          imx8mq-pcie.
+           imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep.
 
   clock-names:
     minItems: 3
-    items:
-      - const: pcie
-      - const: pcie_bus
-      - const: pcie_phy
-      - const: pcie_inbound_axi for imx6sx-pcie, pcie_aux for imx8mq-pcie
-
-  num-lanes:
-    const: 1
-
-  fsl,imx7d-pcie-phy:
-    $ref: /schemas/types.yaml#/definitions/phandle
-    description: A phandle to an fsl,imx7d-pcie-phy node. Additional
-      required properties for imx7d-pcie and imx8mq-pcie.
+    maxItems: 4
 
-  power-domains:
-    items:
-      - description: The phandle pointing to the DISPLAY domain for
-          imx6sx-pcie, to PCIE_PHY power domain for imx7d-pcie and
-          imx8mq-pcie.
-      - description: The phandle pointing to the PCIE_PHY power domains
-          for imx6sx-pcie.
-
-  power-domain-names:
+  interrupts:
     items:
-      - const: pcie
-      - const: pcie_phy
-
-  resets:
-    maxItems: 3
-    description: Phandles to PCIe-related reset lines exposed by SRC
-      IP block. Additional required by imx7d-pcie and imx8mq-pcie.
+      - description: builtin MSI controller.
 
-  reset-names:
+  interrupt-names:
     items:
-      - const: pciephy
-      - const: apps
-      - const: turnoff
-
-  fsl,tx-deemph-gen1:
-    description: Gen1 De-emphasis value (optional required).
-    $ref: /schemas/types.yaml#/definitions/uint32
-    default: 0
-
-  fsl,tx-deemph-gen2-3p5db:
-    description: Gen2 (3.5db) De-emphasis value (optional required).
-    $ref: /schemas/types.yaml#/definitions/uint32
-    default: 0
-
-  fsl,tx-deemph-gen2-6db:
-    description: Gen2 (6db) De-emphasis value (optional required).
-    $ref: /schemas/types.yaml#/definitions/uint32
-    default: 20
-
-  fsl,tx-swing-full:
-    description: Gen2 TX SWING FULL value (optional required).
-    $ref: /schemas/types.yaml#/definitions/uint32
-    default: 127
-
-  fsl,tx-swing-low:
-    description: TX launch amplitude swing_low value (optional required).
-    $ref: /schemas/types.yaml#/definitions/uint32
-    default: 127
-
-  fsl,max-link-speed:
-    description: Specify PCI Gen for link capability (optional required).
-      Note that the IMX6 LVDS clock outputs do not meet gen2 jitter
-      requirements and thus for gen2 capability a gen2 compliant clock
-      generator should be used and configured.
-    $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [1, 2, 3, 4]
-    default: 1
+      - const: msi
 
   reset-gpio:
     description: Should specify the GPIO for controlling the PCI bus device
@@ -136,17 +70,7 @@ properties:
     description: If present then the reset sequence using the GPIO
       specified in the "reset-gpio" property is reversed (H=reset state,
       L=operation state) (optional required).
-
-  vpcie-supply:
-    description: Should specify the regulator in charge of PCIe port power.
-      The regulator will be enabled when initializing the PCIe host and
-      disabled either as part of the init process or when shutting down
-      the host (optional required).
-
-  vph-supply:
-    description: Should specify the regulator in charge of VPH one of
-      the three PCIe PHY powers. This regulator can be supplied by both
-      1.8v and 3.3v voltage supplies (optional required).
+    type: boolean
 
 required:
   - compatible
@@ -157,14 +81,79 @@ required:
   - device_type
   - bus-range
   - ranges
-  - num-lanes
   - interrupts
   - interrupt-names
   - "#interrupt-cells"
   - interrupt-map-mask
   - interrupt-map
-  - clocks
-  - clock-names
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx6sx-pcie
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_phy
+            - const: pcie_inbound_axi
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mq-pcie
+    then:
+      properties:
+        clocks:
+          minItems: 4
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_phy
+            - const: pcie_aux
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx6q-pcie
+            - fsl,imx6qp-pcie
+            - fsl,imx7d-pcie
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_phy
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,imx8mm-pcie
+            - fsl,imx8mp-pcie
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: pcie
+            - const: pcie_bus
+            - const: pcie_aux
 
 unevaluatedProperties: false
 
diff --git a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
index cbee87802559..c9f04999c9cf 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
@@ -37,6 +37,19 @@ properties:
     minItems: 3
     maxItems: 4
 
+  clocks: true
+
+  clock-names:
+    items:
+      - const: pcie_phy_ref
+      - const: pcie_aux
+      - const: pcie_apb_phy
+      - const: pcie_apb_sys
+      - const: pcie_aclk
+
+  phys:
+    maxItems: 1
+
   hisilicon,clken-gpios:
     description: |
       Clock input enablement GPIOs from PCI devices like Ethernet, M.2 and
diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
index 6bcaa8f2c3cf..d25423aa7167 100644
--- a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
+++ b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
@@ -106,6 +106,9 @@ properties:
     maxItems: 3
 
   dma-coherent: true
+  iommu-map: true
+  iommu-map-mask: true
+  msi-parent: true
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
index e87ff27526ff..730e63fd7669 100644
--- a/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/pci/intel,keembay-pcie-ep.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/pci/intel,keembay-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Intel Keem Bay PCIe controller Endpoint mode
 
diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
index ed4400c9ac09..505acc4f3efc 100644
--- a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/pci/intel,keembay-pcie.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/pci/intel,keembay-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Intel Keem Bay PCIe controller Root Complex mode
 
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index f36efa73a470..ee8a4791a78b 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -23,6 +23,7 @@ Required properties:
         "fsl,ls1012a-pcie"
         "fsl,ls1028a-pcie"
   EP mode:
+	"fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep"
 	"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
 	"fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
 	"fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
@@ -30,39 +31,49 @@ Required properties:
 - reg: base addresses and lengths of the PCIe controller register blocks.
 - interrupts: A list of interrupt outputs of the controller. Must contain an
   entry for each entry in the interrupt-names property.
-- interrupt-names: Must include the following entries:
-  "intr": The interrupt that is asserted for controller interrupts
+- interrupt-names: It could include the following entries:
+  "aer": Used for interrupt line which reports AER events when
+	 non MSI/MSI-X/INTx mode is used
+  "pme": Used for interrupt line which reports PME events when
+	 non MSI/MSI-X/INTx mode is used
+  "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
+	  which has a single interrupt line for miscellaneous controller
+	  events(could include AER and PME events).
 - fsl,pcie-scfg: Must include two entries.
   The first entry must be a link to the SCFG device node
-  The second entry must be '0' or '1' based on physical PCIe controller index.
+  The second entry is the physical PCIe controller index starting from '0'.
   This is used to get SCFG PEXN registers
 - dma-coherent: Indicates that the hardware IP block can ensure the coherency
   of the data transferred from/to the IP block. This can avoid the software
   cache flush/invalid actions, and improve the performance significantly.
 
+Optional properties:
+- big-endian: If the PEX_LUT and PF register block is in big-endian, specify
+  this property.
+
 Example:
 
-	pcie@3400000 {
-		compatible = "fsl,ls1021a-pcie";
-		reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
-		       0x40 0x00000000 0x0 0x00002000>; /* configuration space */
-		reg-names = "regs", "config";
-		interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
-		interrupt-names = "intr";
-		fsl,pcie-scfg = <&scfg 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		dma-coherent;
-		num-lanes = <4>;
-		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
-			  0xc2000000 0x0 0x20000000 0x40 0x20000000 0x0 0x20000000   /* prefetchable memory */
-			  0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-	};
+        pcie@3400000 {
+                compatible = "fsl,ls1088a-pcie";
+                reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+                      <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+                reg-names = "regs", "config";
+                interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+                interrupt-names = "aer";
+                #address-cells = <3>;
+                #size-cells = <2>;
+                device_type = "pci";
+                dma-coherent;
+                num-viewport = <256>;
+                bus-range = <0x0 0xff>;
+                ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000   /* downstream I/O */
+                          0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+                msi-parent = <&its>;
+                #interrupt-cells = <1>;
+                interrupt-map-mask = <0 0 0 7>;
+                interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+                                <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+                iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+        };
diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml
new file mode 100644
index 000000000000..e63e6458cea8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek,mt7621-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7621 PCIe controller
+
+maintainers:
+  - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |+
+  MediaTek MT7621 PCIe subsys supports a single Root Complex (RC)
+  with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt7621-pci
+
+  reg:
+    items:
+      - description: host-pci bridge registers
+      - description: pcie port 0 RC control registers
+      - description: pcie port 1 RC control registers
+      - description: pcie port 2 RC control registers
+
+  ranges:
+    maxItems: 2
+
+patternProperties:
+  '^pcie@[0-2],0$':
+    type: object
+    $ref: /schemas/pci/pci-bus.yaml#
+
+    properties:
+      resets:
+        maxItems: 1
+
+      clocks:
+        maxItems: 1
+
+      phys:
+        maxItems: 1
+
+      phy-names:
+        pattern: '^pcie-phy[0-2]$'
+
+    required:
+      - "#interrupt-cells"
+      - interrupt-map-mask
+      - interrupt-map
+      - resets
+      - clocks
+      - phys
+      - phy-names
+      - ranges
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+    pcie: pcie@1e140000 {
+        compatible = "mediatek,mt7621-pci";
+        reg = <0x1e140000 0x100>,
+              <0x1e142000 0x100>,
+              <0x1e143000 0x100>,
+              <0x1e144000 0x100>;
+
+        #address-cells = <3>;
+        #size-cells = <2>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pcie_pins>;
+        device_type = "pci";
+        ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>,  /* pci memory */
+                 <0x01000000 0 0x1e160000 0x1e160000 0 0x00010000>;  /* io space */
+        #interrupt-cells = <1>;
+        interrupt-map-mask = <0xF800 0 0 0>;
+        interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+        reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+
+        pcie@0,0 {
+            reg = <0x0000 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&rstctrl 24>;
+            clocks = <&clkctrl 24>;
+            phys = <&pcie0_phy 1>;
+            phy-names = "pcie-phy0";
+            ranges;
+        };
+
+        pcie@1,0 {
+            reg = <0x0800 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&rstctrl 25>;
+            clocks = <&clkctrl 25>;
+            phys = <&pcie0_phy 1>;
+            phy-names = "pcie-phy1";
+            ranges;
+        };
+
+        pcie@2,0 {
+            reg = <0x1000 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&rstctrl 26>;
+            clocks = <&clkctrl 26>;
+            phys = <&pcie2_phy 0>;
+            phy-names = "pcie-phy2";
+            ranges;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
index 742206dbd965..7e8c7a2a5f9b 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
@@ -43,12 +43,16 @@ description: |+
   each set has its own address for MSI message, and supports 32 MSI vectors
   to generate interrupt.
 
-allOf:
-  - $ref: /schemas/pci/pci-bus.yaml#
-
 properties:
   compatible:
-    const: mediatek,mt8192-pcie
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt7986-pcie
+              - mediatek,mt8188-pcie
+              - mediatek,mt8195-pcie
+          - const: mediatek,mt8192-pcie
+      - const: mediatek,mt8192-pcie
 
   reg:
     maxItems: 1
@@ -64,27 +68,29 @@ properties:
     minItems: 1
     maxItems: 8
 
+  iommu-map:
+    maxItems: 1
+
+  iommu-map-mask:
+    const: 0
+
   resets:
     minItems: 1
     maxItems: 2
 
   reset-names:
     minItems: 1
+    maxItems: 2
     items:
-      - const: phy
-      - const: mac
+      enum: [ phy, mac ]
 
   clocks:
+    minItems: 4
     maxItems: 6
 
   clock-names:
-    items:
-      - const: pl_250m
-      - const: tl_26m
-      - const: tl_96m
-      - const: tl_32k
-      - const: peri_26m
-      - const: top_133m
+    minItems: 4
+    maxItems: 6
 
   assigned-clocks:
     maxItems: 1
@@ -95,6 +101,13 @@ properties:
   phys:
     maxItems: 1
 
+  phy-names:
+    items:
+      - const: pcie-phy
+
+  power-domains:
+    maxItems: 1
+
   '#interrupt-cells':
     const: 1
 
@@ -122,9 +135,58 @@ required:
   - interrupts
   - ranges
   - clocks
+  - clock-names
   - '#interrupt-cells'
   - interrupt-controller
 
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          const: mediatek,mt8192-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pl_250m
+            - const: tl_26m
+            - const: tl_96m
+            - const: tl_32k
+            - const: peri_26m
+            - const: top_133m
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8188-pcie
+              - mediatek,mt8195-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pl_250m
+            - const: tl_26m
+            - const: tl_96m
+            - const: tl_32k
+            - const: peri_26m
+            - const: peri_mem
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt7986-pcie
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: pl_250m
+            - const: tl_26m
+            - const: peri_26m
+            - const: top_133m
+
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
index 57ae73462272..684227522267 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -7,6 +7,7 @@ Required properties:
 	"mediatek,mt7622-pcie"
 	"mediatek,mt7623-pcie"
 	"mediatek,mt7629-pcie"
+	"airoha,en7523-pcie"
 - device_type: Must be "pci"
 - reg: Base addresses and lengths of the root ports.
 - reg-names: Names of the above areas to use during resource lookup.
diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
index fb95c276a986..f7a3c2636355 100644
--- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
+++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
@@ -4,13 +4,14 @@
 $id: http://devicetree.org/schemas/pci/microchip,pcie-host.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Microchip PCIe Root Port Bridge Controller Device Tree Bindings
+title: Microchip PCIe Root Port Bridge Controller
 
 maintainers:
   - Daire McNamara <daire.mcnamara@microchip.com>
 
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
 
 properties:
   compatible:
@@ -24,6 +25,33 @@ properties:
       - const: cfg
       - const: apb
 
+  clocks:
+    description:
+      Fabric Interface Controllers, FICs, are the interface between the FPGA
+      fabric and the core complex on PolarFire SoC. The FICs require two clocks,
+      one from each side of the interface. The "FIC clocks" described by this
+      property are on the core complex side & communication through a FIC is not
+      possible unless it's corresponding clock is enabled. A clock must be
+      enabled for each of the interfaces the root port is connected through.
+      This could in theory be all 4 interfaces, one interface or any combination
+      in between.
+    minItems: 1
+    items:
+      - description: FIC0's clock
+      - description: FIC1's clock
+      - description: FIC2's clock
+      - description: FIC3's clock
+
+  clock-names:
+    description:
+      As any FIC connection combination is possible, the names should match the
+      order in the clocks property and take the form "ficN" where N is a number
+      0-3
+    minItems: 1
+    maxItems: 4
+    items:
+      pattern: '^fic[0-3]$'
+
   interrupts:
     minItems: 1
     items:
@@ -39,12 +67,34 @@ properties:
   ranges:
     maxItems: 1
 
+  dma-ranges:
+    minItems: 1
+    maxItems: 6
+
   msi-controller:
     description: Identifies the node as an MSI controller.
 
   msi-parent:
     description: MSI controller the device is capable of using.
 
+  interrupt-controller:
+    type: object
+    properties:
+      '#address-cells':
+        const: 0
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupt-controller: true
+
+    required:
+      - '#address-cells'
+      - '#interrupt-cells'
+      - interrupt-controller
+
+    additionalProperties: false
+
 required:
   - reg
   - reg-names
diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
index 6173af6885f8..6d022a9d36ee 100644
--- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt
+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
@@ -77,9 +77,15 @@ and the following optional properties:
 - marvell,pcie-lane: the physical PCIe lane number, for ports having
   multiple lanes. If this property is not found, we assume that the
   value is 0.
+- num-lanes: number of SerDes PCIe lanes for this link (1 or 4)
 - reset-gpios: optional GPIO to PERST#
 - reset-delay-us: delay in us to wait after reset de-assertion, if not
   specified will default to 100ms, as required by the PCIe specification.
+- interrupt-names: list of interrupt names, supported are:
+   - "intx" - interrupt line triggered by one of the legacy interrupt
+- interrupts or interrupts-extended: List of the interrupt sources which
+  corresponding to the "interrupt-names". If non-empty then also additional
+  'interrupt-controller' subnode must be defined.
 
 Example:
 
@@ -141,6 +147,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 58>;
 		marvell,pcie-port = <0>;
 		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
 		/* low-active PERST# reset on GPIO 25 */
 		reset-gpios = <&gpio0 25 1>;
 		/* wait 20ms for device settle after reset deassertion */
@@ -161,6 +168,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 59>;
 		marvell,pcie-port = <0>;
 		marvell,pcie-lane = <1>;
+		num-lanes = <1>;
 		clocks = <&gateclk 6>;
 	};
 
@@ -177,6 +185,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 60>;
 		marvell,pcie-port = <0>;
 		marvell,pcie-lane = <2>;
+		num-lanes = <1>;
 		clocks = <&gateclk 7>;
 	};
 
@@ -193,6 +202,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 61>;
 		marvell,pcie-port = <0>;
 		marvell,pcie-lane = <3>;
+		num-lanes = <1>;
 		clocks = <&gateclk 8>;
 	};
 
@@ -209,6 +219,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 62>;
 		marvell,pcie-port = <1>;
 		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
 		clocks = <&gateclk 9>;
 	};
 
@@ -225,6 +236,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 63>;
 		marvell,pcie-port = <1>;
 		marvell,pcie-lane = <1>;
+		num-lanes = <1>;
 		clocks = <&gateclk 10>;
 	};
 
@@ -241,6 +253,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 64>;
 		marvell,pcie-port = <1>;
 		marvell,pcie-lane = <2>;
+		num-lanes = <1>;
 		clocks = <&gateclk 11>;
 	};
 
@@ -257,6 +270,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 65>;
 		marvell,pcie-port = <1>;
 		marvell,pcie-lane = <3>;
+		num-lanes = <1>;
 		clocks = <&gateclk 12>;
 	};
 
@@ -273,6 +287,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 99>;
 		marvell,pcie-port = <2>;
 		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
 		clocks = <&gateclk 26>;
 	};
 
@@ -289,6 +304,7 @@ pcie-controller {
 		interrupt-map = <0 0 0 0 &mpic 103>;
 		marvell,pcie-port = <3>;
 		marvell,pcie-lane = <0>;
+		num-lanes = <1>;
 		clocks = <&gateclk 27>;
 	};
 };
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
new file mode 100644
index 000000000000..a24fb8307d29
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
@@ -0,0 +1,319 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 (and later) PCIe Endpoint controller (Synopsys DesignWare Core based)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Vidya Sagar <vidyas@nvidia.com>
+
+description: |
+  This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus
+  inherits all the common properties defined in snps,dw-pcie-ep.yaml.  Some
+  of the controller instances are dual mode; they can work either in Root
+  Port mode or Endpoint mode but one at a time.
+
+  On Tegra194, controllers C0, C4 and C5 support Endpoint mode.
+  On Tegra234, controllers C5, C6, C7 and C10 support Endpoint mode.
+
+  Note: On Tegra194's P2972-0000 platform, only C5 controller can be enabled to
+  operate in the Endpoint mode because of the way the platform is designed.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-pcie-ep
+      - nvidia,tegra234-pcie-ep
+
+  reg:
+    items:
+      - description: controller's application logic registers
+      - description: iATU and DMA registers. This is where the iATU (internal
+          Address Translation Unit) registers of the PCIe core are made
+          available for software access.
+      - description: aperture where the Root Port's own configuration
+          registers are available.
+      - description: aperture used to map the remote Root Complex address space
+
+  reg-names:
+    items:
+      - const: appl
+      - const: atu_dma
+      - const: dbi
+      - const: addr_space
+
+  interrupts:
+    items:
+      - description: controller interrupt
+
+  interrupt-names:
+    items:
+      - const: intr
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: core
+
+  resets:
+    items:
+      - description: APB bus interface reset
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: apb
+      - const: core
+
+  reset-gpios:
+    description: Must contain a phandle to a GPIO controller followed by GPIO
+      that is being used as PERST input signal. Please refer to pci.txt.
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: p2u-0
+      - const: p2u-1
+      - const: p2u-2
+      - const: p2u-3
+      - const: p2u-4
+      - const: p2u-5
+      - const: p2u-6
+      - const: p2u-7
+
+  power-domains:
+    maxItems: 1
+    description: |
+      A phandle to the node that controls power to the respective PCIe
+      controller and a specifier name for the PCIe controller.
+
+      Tegra194 specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h"
+      Tegra234 specifiers are defined in "include/dt-bindings/power/tegra234-powergate.h"
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Must contain a pair of phandles to BPMP controller node followed by
+      controller ID. Following are the controller IDs for each controller:
+
+      Tegra194
+
+        0: C0
+        1: C1
+        2: C2
+        3: C3
+        4: C4
+        5: C5
+
+      Tegra234
+
+        0 : C0
+        1 : C1
+        2 : C2
+        3 : C3
+        4 : C4
+        5 : C5
+        6 : C6
+        7 : C7
+        8 : C8
+        9 : C9
+        10: C10
+
+    items:
+      - items:
+          - description: phandle to BPMP controller node
+          - description: PCIe controller ID
+            maximum: 10
+
+  nvidia,aspm-cmrt-us:
+    description: Common Mode Restore Time for proper operation of ASPM to be
+      specified in microseconds
+
+  nvidia,aspm-pwr-on-t-us:
+    description: Power On time for proper operation of ASPM to be specified in
+      microseconds
+
+  nvidia,aspm-l0s-entrance-latency-us:
+    description: ASPM L0s entrance latency to be specified in microseconds
+
+  vddio-pex-ctl-supply:
+    description: A phandle to the regulator supply for PCIe side band signals
+
+  nvidia,refclk-select-gpios:
+    maxItems: 1
+    description: GPIO used to enable REFCLK to controller from the host
+
+  nvidia,enable-ext-refclk:
+    description: |
+      This boolean property needs to be present if the controller is configured
+      to receive Reference Clock from the host.
+      NOTE: This is applicable only for Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,enable-srns:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to operate in SRNS (Separate Reference Clocks with No
+      Spread-Spectrum Clocking).  NOTE: This is applicable only for
+      Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+
+unevaluatedProperties: false
+
+required:
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - reset-gpios
+  - vddio-pex-ctl-supply
+  - num-lanes
+  - phys
+  - phy-names
+  - nvidia,bpmp
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/gpio/tegra194-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie-ep@141a0000 {
+            compatible = "nvidia,tegra194-pcie-ep";
+            reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */
+                  <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */
+                  <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */
+            reg-names = "appl", "atu_dma", "dbi", "addr_space";
+            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+            interrupt-names = "intr";
+
+            clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+                     <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+            reset-names = "apb", "core";
+
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&clkreq_c5_bi_dir_state>;
+
+            nvidia,bpmp = <&bpmp 5>;
+
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+            reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+            nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+                                          GPIO_ACTIVE_HIGH>;
+
+            num-lanes = <8>;
+
+            phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+                   <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+                   <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+                        "p2u-5", "p2u-6", "p2u-7";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/gpio/tegra234-gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie-ep@141a0000 {
+            compatible = "nvidia,tegra234-pcie-ep";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>;
+            reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+                  <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G)        */
+            reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+            interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+            interrupt-names = "intr";
+
+            clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>,
+                     <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
+            reset-names = "apb", "core";
+
+            nvidia,bpmp = <&bpmp 5>;
+
+            nvidia,enable-ext-refclk;
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            vddio-pex-ctl-supply = <&p3701_vdd_1v8_ls>;
+
+            reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
+
+            nvidia,refclk-select-gpios = <&gpio_aon
+                                          TEGRA234_AON_GPIO(AA, 4)
+                                          GPIO_ACTIVE_HIGH>;
+
+            num-lanes = <8>;
+
+            phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+                   <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+                   <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+                        "p2u-5", "p2u-6", "p2u-7";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
deleted file mode 100644
index 6a99d2aa8075..000000000000
--- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt
+++ /dev/null
@@ -1,245 +0,0 @@
-NVIDIA Tegra PCIe controller (Synopsys DesignWare Core based)
-
-This PCIe controller is based on the Synopsis Designware PCIe IP
-and thus inherits all the common properties defined in snps,dw-pcie.yaml and
-snps,dw-pcie-ep.yaml.
-Some of the controller instances are dual mode where in they can work either
-in root port mode or endpoint mode but one at a time.
-
-Required properties:
-- power-domains: A phandle to the node that controls power to the respective
-  PCIe controller and a specifier name for the PCIe controller. Following are
-  the specifiers for the different PCIe controllers
-    TEGRA194_POWER_DOMAIN_PCIEX8B: C0
-    TEGRA194_POWER_DOMAIN_PCIEX1A: C1
-    TEGRA194_POWER_DOMAIN_PCIEX1A: C2
-    TEGRA194_POWER_DOMAIN_PCIEX1A: C3
-    TEGRA194_POWER_DOMAIN_PCIEX4A: C4
-    TEGRA194_POWER_DOMAIN_PCIEX8A: C5
-  these specifiers are defined in
-  "include/dt-bindings/power/tegra194-powergate.h" file.
-- reg: A list of physical base address and length pairs for each set of
-  controller registers. Must contain an entry for each entry in the reg-names
-  property.
-- reg-names: Must include the following entries:
-  "appl": Controller's application logic registers
-  "config": As per the definition in snps,dw-pcie.yaml
-  "atu_dma": iATU and DMA registers. This is where the iATU (internal Address
-             Translation Unit) registers of the PCIe core are made available
-             for SW access.
-  "dbi": The aperture where root port's own configuration registers are
-         available
-- interrupts: A list of interrupt outputs of the controller. Must contain an
-  entry for each entry in the interrupt-names property.
-- interrupt-names: Must include the following entries:
-  "intr": The Tegra interrupt that is asserted for controller interrupts
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - core
-- resets: Must contain an entry for each entry in reset-names.
-  See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
-  - apb
-  - core
-- phys: Must contain a phandle to P2U PHY for each entry in phy-names.
-- phy-names: Must include an entry for each active lane.
-  "p2u-N": where N ranges from 0 to one less than the total number of lanes
-- nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed
-  by controller-id. Following are the controller ids for each controller.
-    0: C0
-    1: C1
-    2: C2
-    3: C3
-    4: C4
-    5: C5
-- vddio-pex-ctl-supply: Regulator supply for PCIe side band signals
-
-RC mode:
-- compatible: Tegra19x must contain  "nvidia,tegra194-pcie"
-- device_type: Must be "pci" for RC mode
-- interrupt-names: Must include the following entries:
-  "msi": The Tegra interrupt that is asserted when an MSI is received
-- bus-range: Range of bus numbers associated with this controller
-- #address-cells: Address representation for root ports (must be 3)
-  - cell 0 specifies the bus and device numbers of the root port:
-    [23:16]: bus number
-    [15:11]: device number
-  - cell 1 denotes the upper 32 address bits and should be 0
-  - cell 2 contains the lower 32 address bits and is used to translate to the
-    CPU address space
-- #size-cells: Size representation for root ports (must be 2)
-- ranges: Describes the translation of addresses for root ports and standard
-  PCI regions. The entries must be 7 cells each, where the first three cells
-  correspond to the address as described for the #address-cells property
-  above, the fourth and fifth cells are for the physical CPU address to
-  translate to and the sixth and seventh cells are as described for the
-  #size-cells property above.
-  - Entries setup the mapping for the standard I/O, memory and
-    prefetchable PCI regions. The first cell determines the type of region
-    that is setup:
-    - 0x81000000: I/O memory region
-    - 0x82000000: non-prefetchable memory region
-    - 0xc2000000: prefetchable memory region
-  Please refer to the standard PCI bus binding document for a more detailed
-  explanation.
-- #interrupt-cells: Size representation for interrupts (must be 1)
-- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
-  Please refer to the standard PCI bus binding document for a more detailed
-  explanation.
-
-EP mode:
-In Tegra194, Only controllers C0, C4 & C5 support EP mode.
-- compatible: Tegra19x must contain "nvidia,tegra194-pcie-ep"
-- reg-names: Must include the following entries:
-  "addr_space": Used to map remote RC address space
-- reset-gpios: Must contain a phandle to a GPIO controller followed by
-  GPIO that is being used as PERST input signal. Please refer to pci.txt
-  document.
-
-Optional properties:
-- pinctrl-names: A list of pinctrl state names.
-  It is mandatory for C5 controller and optional for other controllers.
-  - "default": Configures PCIe I/O for proper operation.
-- pinctrl-0: phandle for the 'default' state of pin configuration.
-  It is mandatory for C5 controller and optional for other controllers.
-- supports-clkreq: Refer to Documentation/devicetree/bindings/pci/pci.txt
-- nvidia,update-fc-fixup: This is a boolean property and needs to be present to
-    improve performance when a platform is designed in such a way that it
-    satisfies at least one of the following conditions thereby enabling root
-    port to exchange optimum number of FC (Flow Control) credits with
-    downstream devices
-    1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
-    2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
-       a) speed is Gen-2 and MPS is 256B
-       b) speed is >= Gen-3 with any MPS
-- nvidia,aspm-cmrt-us: Common Mode Restore Time for proper operation of ASPM
-   to be specified in microseconds
-- nvidia,aspm-pwr-on-t-us: Power On time for proper operation of ASPM to be
-   specified in microseconds
-- nvidia,aspm-l0s-entrance-latency-us: ASPM L0s entrance latency to be
-   specified in microseconds
-
-RC mode:
-- vpcie3v3-supply: A phandle to the regulator node that supplies 3.3V to the slot
-  if the platform has one such slot. (Ex:- x16 slot owned by C5 controller
-  in p2972-0000 platform).
-- vpcie12v-supply: A phandle to the regulator node that supplies 12V to the slot
-  if the platform has one such slot. (Ex:- x16 slot owned by C5 controller
-  in p2972-0000 platform).
-
-EP mode:
-- nvidia,refclk-select-gpios: Must contain a phandle to a GPIO controller
-  followed by GPIO that is being used to enable REFCLK to controller from host
-
-NOTE:- On Tegra194's P2972-0000 platform, only C5 controller can be enabled to
-operate in the endpoint mode because of the way the platform is designed.
-
-Examples:
-=========
-
-Tegra194 RC mode:
------------------
-
-	pcie@14180000 {
-		compatible = "nvidia,tegra194-pcie";
-		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
-		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x38000000 0x0 0x00040000   /* configuration space (256K) */
-		       0x00 0x38040000 0x0 0x00040000>; /* iATU_DMA reg space (256K)  */
-		reg-names = "appl", "config", "atu_dma";
-
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		num-lanes = <8>;
-		linux,pci-domain = <0>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
-
-		clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
-		clock-names = "core";
-
-		resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
-			 <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
-		reset-names = "apb", "core";
-
-		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,	/* controller interrupt */
-			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;	/* MSI interrupt */
-		interrupt-names = "intr", "msi";
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-
-		nvidia,bpmp = <&bpmp 0>;
-
-		supports-clkreq;
-		nvidia,aspm-cmrt-us = <60>;
-		nvidia,aspm-pwr-on-t-us = <20>;
-		nvidia,aspm-l0s-entrance-latency-us = <3>;
-
-		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0  0x38100000 0x0  0x38100000 0x0 0x00100000    /* downstream I/O (1MB) */
-			  0x82000000 0x0  0x38200000 0x0  0x38200000 0x0 0x01E00000    /* non-prefetchable memory (30MB) */
-			  0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>;  /* prefetchable memory (16GB) */
-
-		vddio-pex-ctl-supply = <&vdd_1v8ao>;
-		vpcie3v3-supply = <&vdd_3v3_pcie>;
-		vpcie12v-supply = <&vdd_12v_pcie>;
-
-		phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
-		       <&p2u_hsio_5>;
-		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
-	};
-
-Tegra194 EP mode:
------------------
-
-	pcie_ep@141a0000 {
-		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
-		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
-		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x3a080000 0x0 0x00040000   /* DBI reg space (256K)       */
-		       0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
-		reg-names = "appl", "atu_dma", "dbi", "addr_space";
-
-		num-lanes = <8>;
-		num-ib-windows = <2>;
-		num-ob-windows = <8>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&clkreq_c5_bi_dir_state>;
-
-		clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
-		clock-names = "core";
-
-		resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
-			 <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
-		reset-names = "apb", "core";
-
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;	/* controller interrupt */
-		interrupt-names = "intr";
-
-		nvidia,bpmp = <&bpmp 5>;
-
-		nvidia,aspm-cmrt-us = <60>;
-		nvidia,aspm-pwr-on-t-us = <20>;
-		nvidia,aspm-l0s-entrance-latency-us = <3>;
-
-		vddio-pex-ctl-supply = <&vdd_1v8ao>;
-
-		reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
-
-		nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
-					      GPIO_ACTIVE_HIGH>;
-
-		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
-		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
-		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
-
-		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
-			    "p2u-5", "p2u-6", "p2u-7";
-	};
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml
new file mode 100644
index 000000000000..fe81d52c7277
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml
@@ -0,0 +1,380 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 (and later) PCIe controller (Synopsys DesignWare Core based)
+
+maintainers:
+  - Thierry Reding <thierry.reding@gmail.com>
+  - Jon Hunter <jonathanh@nvidia.com>
+  - Vidya Sagar <vidyas@nvidia.com>
+
+description: |
+  This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus
+  inherits all the common properties defined in snps,dw-pcie.yaml. Some of
+  the controller instances are dual mode where in they can work either in
+  Root Port mode or Endpoint mode but one at a time.
+
+  See nvidia,tegra194-pcie-ep.yaml for details on the Endpoint mode device
+  tree bindings.
+
+properties:
+  compatible:
+    enum:
+      - nvidia,tegra194-pcie
+      - nvidia,tegra234-pcie
+
+  reg:
+    minItems: 4
+    items:
+      - description: controller's application logic registers
+      - description: configuration registers
+      - description: iATU and DMA registers. This is where the iATU (internal
+          Address Translation Unit) registers of the PCIe core are made
+          available for software access.
+      - description: aperture where the Root Port's own configuration
+          registers are available.
+      - description: aperture to access the configuration space through ECAM.
+
+  reg-names:
+    minItems: 4
+    items:
+      - const: appl
+      - const: config
+      - const: atu_dma
+      - const: dbi
+      - const: ecam
+
+  interrupts:
+    items:
+      - description: controller interrupt
+      - description: MSI interrupt
+
+  interrupt-names:
+    items:
+      - const: intr
+      - const: msi
+
+  clocks:
+    items:
+      - description: module clock
+
+  clock-names:
+    items:
+      - const: core
+
+  resets:
+    items:
+      - description: APB bus interface reset
+      - description: module reset
+
+  reset-names:
+    items:
+      - const: apb
+      - const: core
+
+  phys:
+    minItems: 1
+    maxItems: 8
+
+  phy-names:
+    minItems: 1
+    items:
+      - const: p2u-0
+      - const: p2u-1
+      - const: p2u-2
+      - const: p2u-3
+      - const: p2u-4
+      - const: p2u-5
+      - const: p2u-6
+      - const: p2u-7
+
+  power-domains:
+    maxItems: 1
+    description: |
+      A phandle to the node that controls power to the respective PCIe
+      controller and a specifier name for the PCIe controller.
+
+      Tegra194 specifiers defined in "include/dt-bindings/power/tegra194-powergate.h"
+      Tegra234 specifiers defined in "include/dt-bindings/power/tegra234-powergate.h"
+
+  interconnects:
+    items:
+      - description: memory read client
+      - description: memory write client
+
+  interconnect-names:
+    items:
+      - const: dma-mem # read
+      - const: write
+
+  dma-coherent: true
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: |
+      Must contain a pair of phandles to BPMP controller node followed by
+      controller ID. Following are the controller IDs for each controller:
+
+      Tegra194
+
+        0: C0
+        1: C1
+        2: C2
+        3: C3
+        4: C4
+        5: C5
+
+      Tegra234
+
+        0 : C0
+        1 : C1
+        2 : C2
+        3 : C3
+        4 : C4
+        5 : C5
+        6 : C6
+        7 : C7
+        8 : C8
+        9 : C9
+        10: C10
+
+    items:
+      - items:
+          - description: phandle to BPMP controller node
+          - description: PCIe controller ID
+            maximum: 10
+
+  nvidia,update-fc-fixup:
+    description: |
+      This is a boolean property and needs to be present to improve performance
+      when a platform is designed in such a way that it satisfies at least one
+      of the following conditions thereby enabling Root Port to exchange
+      optimum number of FC (Flow Control) credits with downstream devices:
+
+      NOTE: This is applicable only for Tegra194.
+
+        1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
+        2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
+          a) speed is Gen-2 and MPS is 256B
+          b) speed is >= Gen-3 with any MPS
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,aspm-cmrt-us:
+    description: Common Mode Restore Time for proper operation of ASPM to be
+      specified in microseconds
+
+  nvidia,aspm-pwr-on-t-us:
+    description: Power On time for proper operation of ASPM to be specified in
+      microseconds
+
+  nvidia,aspm-l0s-entrance-latency-us:
+    description: ASPM L0s entrance latency to be specified in microseconds
+
+  vddio-pex-ctl-supply:
+    description: A phandle to the regulator supply for PCIe side band signals.
+
+  vpcie3v3-supply:
+    description: A phandle to the regulator node that supplies 3.3V to the slot
+      if the platform has one such slot, e.g., x16 slot owned by C5 controller
+      in p2972-0000 platform.
+
+  vpcie12v-supply:
+    description: A phandle to the regulator node that supplies 12V to the slot
+      if the platform has one such slot, e.g., x16 slot owned by C5 controller
+      in p2972-0000 platform.
+
+  nvidia,enable-srns:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to operate in SRNS (Separate Reference Clocks with No
+      Spread-Spectrum Clocking).  NOTE: This is applicable only for
+      Tegra234.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  nvidia,enable-ext-refclk:
+    description: |
+      This boolean property needs to be present if the controller is
+      configured to use the reference clocking coming in from an external
+      clock source instead of using the internal clock source.
+
+    $ref: /schemas/types.yaml#/definitions/flag
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra194-pcie
+    then:
+      properties:
+        reg:
+          maxItems: 4
+        reg-names:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-pcie
+    then:
+      properties:
+        reg:
+          minItems: 5
+        reg-names:
+          minItems: 5
+
+unevaluatedProperties: false
+
+required:
+  - interrupts
+  - interrupt-names
+  - interrupt-map
+  - interrupt-map-mask
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - vddio-pex-ctl-supply
+  - num-lanes
+  - phys
+  - phy-names
+  - nvidia,bpmp
+
+examples:
+  - |
+    #include <dt-bindings/clock/tegra194-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra194-powergate.h>
+    #include <dt-bindings/reset/tegra194-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie@14180000 {
+            compatible = "nvidia,tegra194-pcie";
+            power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+            reg = <0x0 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x0 0x38000000 0x0 0x00040000>, /* configuration space (256K) */
+                  <0x0 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x0 0x38080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+            reg-names = "appl", "config", "atu_dma", "dbi";
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            num-lanes = <8>;
+            linux,pci-domain = <0>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
+
+            clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+                     <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+            reset-names = "apb", "core";
+
+            interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+                         <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+            interrupt-names = "intr", "msi";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+            nvidia,bpmp = <&bpmp 0>;
+
+            supports-clkreq;
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            bus-range = <0x0 0xff>;
+            ranges = <0x81000000 0x0  0x38100000 0x0  0x38100000 0x0 0x00100000>, /* downstream I/O */
+                     <0x82000000 0x0  0x38200000 0x0  0x38200000 0x0 0x01e00000>, /* non-prefetch memory */
+                     <0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory */
+
+            vddio-pex-ctl-supply = <&vdd_1v8ao>;
+            vpcie3v3-supply = <&vdd_3v3_pcie>;
+            vpcie12v-supply = <&vdd_12v_pcie>;
+
+            phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
+                   <&p2u_hsio_5>;
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+        };
+    };
+
+  - |
+    #include <dt-bindings/clock/tegra234-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/tegra234-powergate.h>
+    #include <dt-bindings/reset/tegra234-reset.h>
+
+    bus@0 {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+        pcie@14160000 {
+            compatible = "nvidia,tegra234-pcie";
+            power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>;
+            reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
+                  <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
+                  <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+                  <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+                  <0x24 0x30000000 0x0 0x10000000>; /* ECAM (256MB)               */
+            reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            num-lanes = <4>;
+            num-viewport = <8>;
+            linux,pci-domain = <4>;
+
+            clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>;
+            clock-names = "core";
+
+            resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>,
+                     <&bpmp TEGRA234_RESET_PEX0_CORE_4>;
+            reset-names = "apb", "core";
+
+            interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+                         <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+            interrupt-names = "intr", "msi";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0>;
+            interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+            nvidia,bpmp = <&bpmp 4>;
+
+            nvidia,aspm-cmrt-us = <60>;
+            nvidia,aspm-pwr-on-t-us = <20>;
+            nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+            bus-range = <0x0 0xff>;
+            ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable */
+                     <0x02000000 0x0  0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable */
+                     <0x01000000 0x0  0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O */
+
+            vddio-pex-ctl-supply = <&p3701_vdd_AO_1v8>;
+
+            phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+                   <&p2u_hsio_7>;
+            phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml
index ccec51ab5247..d1eef4825207 100644
--- a/Documentation/devicetree/bindings/pci/pci-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pci/pci-ep.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: PCI Endpoint Controller Schema
+title: PCI Endpoint Controller
 
 description: |
   Common properties for PCI Endpoint Controller Nodes.
diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
deleted file mode 100644
index aeba38f0a387..000000000000
--- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-Renesas AHB to PCI bridge
--------------------------
-
-This is the bridge used internally to connect the USB controllers to the
-AHB. There is one bridge instance per USB port connected to the internal
-OHCI and EHCI controllers.
-
-Required properties:
-- compatible: "renesas,pci-r8a7742" for the R8A7742 SoC;
-	      "renesas,pci-r8a7743" for the R8A7743 SoC;
-	      "renesas,pci-r8a7744" for the R8A7744 SoC;
-	      "renesas,pci-r8a7745" for the R8A7745 SoC;
-	      "renesas,pci-r8a7790" for the R8A7790 SoC;
-	      "renesas,pci-r8a7791" for the R8A7791 SoC;
-	      "renesas,pci-r8a7793" for the R8A7793 SoC;
-	      "renesas,pci-r8a7794" for the R8A7794 SoC;
-	      "renesas,pci-rcar-gen2" for a generic R-Car Gen2 or
-				      RZ/G1 compatible device.
-
-
-	      When compatible with the generic version, nodes must list the
-	      SoC-specific version corresponding to the platform first
-	      followed by the generic version.
-
-- reg:	A list of physical regions to access the device: the first is
-	the operational registers for the OHCI/EHCI controllers and the
-	second is for the bridge configuration and control registers.
-- interrupts: interrupt for the device.
-- clocks: The reference to the device clock.
-- bus-range: The PCI bus number range; as this is a single bus, the range
-	     should be specified as the same value twice.
-- #address-cells: must be 3.
-- #size-cells: must be 2.
-- #interrupt-cells: must be 1.
-- interrupt-map: standard property used to define the mapping of the PCI
-  interrupts to the GIC interrupts.
-- interrupt-map-mask: standard property that helps to define the interrupt
-  mapping.
-
-Optional properties:
-- dma-ranges: a single range for the inbound memory region. If not supplied,
-  defaults to 1GiB at 0x40000000. Note there are hardware restrictions on the
-  allowed combinations of address and size.
-
-Example SoC configuration:
-
-	pci0: pci@ee090000  {
-		compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
-		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
-		reg = <0x0 0xee090000 0x0 0xc00>,
-		      <0x0 0xee080000 0x0 0x1100>;
-		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-
-		bus-range = <0 0>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
-		interrupt-map-mask = <0xff00 0 0 0x7>;
-		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
-				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
-
-		usb@1,0 {
-			reg = <0x800 0 0 0 0>;
-			phys = <&usb0 0>;
-			phy-names = "usb";
-		};
-
-		usb@2,0 {
-			reg = <0x1000 0 0 0 0>;
-			phys = <&usb0 0>;
-			phy-names = "usb";
-		};
-	};
-
-Example board setup:
-
-&pci0 {
-	status = "okay";
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-};
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
new file mode 100644
index 000000000000..b3c22ebd156c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCIe Endpoint Controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdx55-pcie-ep
+      - qcom,sm8450-pcie-ep
+
+  reg:
+    items:
+      - description: Qualcomm-specific PARF configuration registers
+      - description: DesignWare PCIe registers
+      - description: External local bus interface registers
+      - description: Address Translation Unit (ATU) registers
+      - description: Memory region used to map remote RC address space
+      - description: BAR memory region
+
+  reg-names:
+    items:
+      - const: parf
+      - const: dbi
+      - const: elbi
+      - const: atu
+      - const: addr_space
+      - const: mmio
+
+  clocks:
+    minItems: 7
+    maxItems: 8
+
+  clock-names:
+    minItems: 7
+    maxItems: 8
+
+  qcom,perst-regs:
+    description: Reference to a syscon representing TCSR followed by the two
+                 offsets within syscon for Perst enable and Perst separation
+                 enable registers
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Syscon to TCSR system registers
+          - description: Perst enable offset
+          - description: Perst separation enable offset
+
+  interrupts:
+    items:
+      - description: PCIe Global interrupt
+      - description: PCIe Doorbell interrupt
+
+  interrupt-names:
+    items:
+      - const: global
+      - const: doorbell
+
+  reset-gpios:
+    description: GPIO used as PERST# input signal
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO used as WAKE# output signal
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: core
+
+  power-domains:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pciephy
+
+  num-lanes:
+    default: 2
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reset-gpios
+  - resets
+  - reset-names
+  - power-domains
+
+allOf:
+  - $ref: pci-ep.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdx55-pcie-ep
+    then:
+      properties:
+        clocks:
+          items:
+            - description: PCIe Auxiliary clock
+            - description: PCIe CFG AHB clock
+            - description: PCIe Master AXI clock
+            - description: PCIe Slave AXI clock
+            - description: PCIe Slave Q2A AXI clock
+            - description: PCIe Sleep clock
+            - description: PCIe Reference clock
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg
+            - const: bus_master
+            - const: bus_slave
+            - const: slave_q2a
+            - const: sleep
+            - const: ref
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-pcie-ep
+    then:
+      properties:
+        clocks:
+          items:
+            - description: PCIe Auxiliary clock
+            - description: PCIe CFG AHB clock
+            - description: PCIe Master AXI clock
+            - description: PCIe Slave AXI clock
+            - description: PCIe Slave Q2A AXI clock
+            - description: PCIe Reference clock
+            - description: PCIe DDRSS SF TBU clock
+            - description: PCIe AGGRE NOC AXI clock
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg
+            - const: bus_master
+            - const: bus_slave
+            - const: slave_q2a
+            - const: ref
+            - const: ddrss_sf_tbu
+            - const: aggre_noc_axi
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sdx55.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pcie_ep: pcie-ep@1c00000 {
+        compatible = "qcom,sdx55-pcie-ep";
+        reg = <0x01c00000 0x3000>,
+              <0x40000000 0xf1d>,
+              <0x40000f20 0xc8>,
+              <0x40001000 0x1000>,
+              <0x40002000 0x1000>,
+              <0x01c03000 0x3000>;
+        reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+                    "mmio";
+
+        clocks = <&gcc GCC_PCIE_AUX_CLK>,
+             <&gcc GCC_PCIE_CFG_AHB_CLK>,
+             <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+             <&gcc GCC_PCIE_SLV_AXI_CLK>,
+             <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+             <&gcc GCC_PCIE_SLEEP_CLK>,
+             <&gcc GCC_PCIE_0_CLKREF_CLK>;
+        clock-names = "aux", "cfg", "bus_master", "bus_slave",
+                      "slave_q2a", "sleep", "ref";
+
+        qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+        interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "global", "doorbell";
+        reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+        wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+        resets = <&gcc GCC_PCIE_BCR>;
+        reset-names = "core";
+        power-domains = <&gcc PCIE_GDSC>;
+        phys = <&pcie0_lane>;
+        phy-names = "pciephy";
+        max-link-speed = <3>;
+        num-lanes = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
deleted file mode 100644
index 3f646875f8c2..000000000000
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ /dev/null
@@ -1,376 +0,0 @@
-* Qualcomm PCI express root complex
-
-- compatible:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Value should contain
-			- "qcom,pcie-ipq8064" for ipq8064
-			- "qcom,pcie-ipq8064-v2" for ipq8064 rev 2 or ipq8065
-			- "qcom,pcie-apq8064" for apq8064
-			- "qcom,pcie-apq8084" for apq8084
-			- "qcom,pcie-msm8996" for msm8996 or apq8096
-			- "qcom,pcie-ipq4019" for ipq4019
-			- "qcom,pcie-ipq8074" for ipq8074
-			- "qcom,pcie-qcs404" for qcs404
-			- "qcom,pcie-sdm845" for sdm845
-			- "qcom,pcie-sm8250" for sm8250
-			- "qcom,pcie-ipq6018" for ipq6018
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: Register ranges as listed in the reg-names property
-
-- reg-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Must include the following entries
-			- "parf"   Qualcomm specific registers
-			- "dbi"	   DesignWare PCIe registers
-			- "elbi"   External local bus interface registers
-			- "config" PCIe configuration space
-			- "atu"    ATU address space (optional)
-
-- device_type:
-	Usage: required
-	Value type: <string>
-	Definition: Should be "pci". As specified in snps,dw-pcie.yaml
-
-- #address-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Should be 3. As specified in snps,dw-pcie.yaml
-
-- #size-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Should be 2. As specified in snps,dw-pcie.yaml
-
-- ranges:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: As specified in snps,dw-pcie.yaml
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: MSI interrupt
-
-- interrupt-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Should contain "msi"
-
-- #interrupt-cells:
-	Usage: required
-	Value type: <u32>
-	Definition: Should be 1. As specified in snps,dw-pcie.yaml
-
-- interrupt-map-mask:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: As specified in snps,dw-pcie.yaml
-
-- interrupt-map:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: As specified in snps,dw-pcie.yaml
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: List of phandle and clock specifier pairs as listed
-		    in clock-names property
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "iface"	Configuration AHB clock
-
-- clock-names:
-	Usage: required for ipq/apq8064
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "core"	Clocks the pcie hw block
-			- "phy"		Clocks the pcie PHY block
-			- "aux" 	Clocks the pcie AUX block
-			- "ref" 	Clocks the pcie ref block
-- clock-names:
-	Usage: required for apq8084/ipq4019
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "aux"		Auxiliary (AUX) clock
-			- "bus_master"	Master AXI clock
-			- "bus_slave"	Slave AXI clock
-
-- clock-names:
-	Usage: required for msm8996/apq8096
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "pipe"	Pipe Clock driving internal logic
-			- "aux"		Auxiliary (AUX) clock
-			- "cfg"		Configuration clock
-			- "bus_master"	Master AXI clock
-			- "bus_slave"	Slave AXI clock
-
-- clock-names:
-	Usage: required for ipq8074
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "iface"	PCIe to SysNOC BIU clock
-			- "axi_m"	AXI Master clock
-			- "axi_s"	AXI Slave clock
-			- "ahb"		AHB clock
-			- "aux"		Auxiliary clock
-
-- clock-names:
-	Usage: required for ipq6018
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "iface"	PCIe to SysNOC BIU clock
-			- "axi_m"	AXI Master clock
-			- "axi_s"	AXI Slave clock
-			- "axi_bridge"	AXI bridge clock
-			- "rchng"
-
-- clock-names:
-	Usage: required for qcs404
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "iface"	AHB clock
-			- "aux"		Auxiliary clock
-			- "master_bus"	AXI Master clock
-			- "slave_bus"	AXI Slave clock
-
-- clock-names:
-	Usage: required for sdm845
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "aux"		Auxiliary clock
-			- "cfg"		Configuration clock
-			- "bus_master"	Master AXI clock
-			- "bus_slave"	Slave AXI clock
-			- "slave_q2a"	Slave Q2A clock
-			- "tbu"		PCIe TBU clock
-			- "pipe"	PIPE clock
-
-- clock-names:
-	Usage: required for sm8250
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "aux"		Auxiliary clock
-			- "cfg"		Configuration clock
-			- "bus_master"	Master AXI clock
-			- "bus_slave"	Slave AXI clock
-			- "slave_q2a"	Slave Q2A clock
-			- "tbu"		PCIe TBU clock
-			- "ddrss_sf_tbu" PCIe SF TBU clock
-			- "pipe"	PIPE clock
-
-- resets:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: List of phandle and reset specifier pairs as listed
-		    in reset-names property
-
-- reset-names:
-	Usage: required for ipq/apq8064
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "axi"  AXI reset
-			- "ahb"  AHB reset
-			- "por"  POR reset
-			- "pci"  PCI reset
-			- "phy"  PHY reset
-
-- reset-names:
-	Usage: required for apq8084
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "core" Core reset
-
-- reset-names:
-	Usage: required for ipq/apq8064
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "axi_m"		AXI master reset
-			- "axi_s"		AXI slave reset
-			- "pipe"		PIPE reset
-			- "axi_m_vmid"		VMID reset
-			- "axi_s_xpu"		XPU reset
-			- "parf"		PARF reset
-			- "phy"			PHY reset
-			- "axi_m_sticky"	AXI sticky reset
-			- "pipe_sticky"		PIPE sticky reset
-			- "pwr"			PWR reset
-			- "ahb"			AHB reset
-			- "phy_ahb"		PHY AHB reset
-			- "ext"			EXT reset
-
-- reset-names:
-	Usage: required for ipq8074
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "pipe"		PIPE reset
-			- "sleep"		Sleep reset
-			- "sticky"		Core Sticky reset
-			- "axi_m"		AXI Master reset
-			- "axi_s"		AXI Slave reset
-			- "ahb"			AHB Reset
-			- "axi_m_sticky"	AXI Master Sticky reset
-
-- reset-names:
-	Usage: required for ipq6018
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "pipe"		PIPE reset
-			- "sleep"		Sleep reset
-			- "sticky"		Core Sticky reset
-			- "axi_m"		AXI Master reset
-			- "axi_s"		AXI Slave reset
-			- "ahb"			AHB Reset
-			- "axi_m_sticky"	AXI Master Sticky reset
-			- "axi_s_sticky"	AXI Slave Sticky reset
-
-- reset-names:
-	Usage: required for qcs404
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "axi_m"		AXI Master reset
-			- "axi_s"		AXI Slave reset
-			- "axi_m_sticky"	AXI Master Sticky reset
-			- "pipe_sticky"		PIPE sticky reset
-			- "pwr"			PWR reset
-			- "ahb"			AHB reset
-
-- reset-names:
-	Usage: required for sdm845 and sm8250
-	Value type: <stringlist>
-	Definition: Should contain the following entries
-			- "pci"			PCIe core reset
-
-- power-domains:
-	Usage: required for apq8084 and msm8996/apq8096
-	Value type: <prop-encoded-array>
-	Definition: A phandle and power domain specifier pair to the
-		    power domain which is responsible for collapsing
-		    and restoring power to the peripheral
-
-- vdda-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: A phandle to the core analog power supply
-
-- vdda_phy-supply:
-	Usage: required for ipq/apq8064
-	Value type: <phandle>
-	Definition: A phandle to the analog power supply for PHY
-
-- vdda_refclk-supply:
-	Usage: required for ipq/apq8064
-	Value type: <phandle>
-	Definition: A phandle to the analog power supply for IC which generates
-		    reference clock
-- vddpe-3v3-supply:
-	Usage: optional
-	Value type: <phandle>
-	Definition: A phandle to the PCIe endpoint power supply
-
-- phys:
-	Usage: required for apq8084 and qcs404
-	Value type: <phandle>
-	Definition: List of phandle(s) as listed in phy-names property
-
-- phy-names:
-	Usage: required for apq8084 and qcs404
-	Value type: <stringlist>
-	Definition: Should contain "pciephy"
-
-- <name>-gpios:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: List of phandle and GPIO specifier pairs. Should contain
-			- "perst-gpios"	PCIe endpoint reset signal line
-			- "wake-gpios"	PCIe endpoint wake signal line
-
-* Example for ipq/apq8064
-	pcie@1b500000 {
-		compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie";
-		reg = <0x1b500000 0x1000
-		       0x1b502000 0x80
-		       0x1b600000 0x100
-		       0x0ff00000 0x100000>;
-		reg-names = "dbi", "elbi", "parf", "config";
-		device_type = "pci";
-		linux,pci-domain = <0>;
-		bus-range = <0x00 0xff>;
-		num-lanes = <1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
-			  0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
-		interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-				<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-				<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-				<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-		clocks = <&gcc PCIE_A_CLK>,
-			 <&gcc PCIE_H_CLK>,
-			 <&gcc PCIE_PHY_CLK>,
-			 <&gcc PCIE_AUX_CLK>,
-			 <&gcc PCIE_ALT_REF_CLK>;
-		clock-names = "core", "iface", "phy", "aux", "ref";
-		resets = <&gcc PCIE_ACLK_RESET>,
-			 <&gcc PCIE_HCLK_RESET>,
-			 <&gcc PCIE_POR_RESET>,
-			 <&gcc PCIE_PCI_RESET>,
-			 <&gcc PCIE_PHY_RESET>,
-			 <&gcc PCIE_EXT_RESET>;
-		reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-		pinctrl-0 = <&pcie_pins_default>;
-		pinctrl-names = "default";
-	};
-
-* Example for apq8084
-	pcie0@fc520000 {
-		compatible = "qcom,pcie-apq8084", "snps,dw-pcie";
-		reg = <0xfc520000 0x2000>,
-		      <0xff000000 0x1000>,
-		      <0xff001000 0x1000>,
-		      <0xff002000 0x2000>;
-		reg-names = "parf", "dbi", "elbi", "config";
-		device_type = "pci";
-		linux,pci-domain = <0>;
-		bus-range = <0x00 0xff>;
-		num-lanes = <1>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		ranges = <0x81000000 0 0          0xff200000 0 0x00100000   /* I/O */
-			  0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */
-		interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-				<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-				<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-				<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-		clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
-			 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
-			 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
-			 <&gcc GCC_PCIE_0_AUX_CLK>;
-		clock-names = "iface", "master_bus", "slave_bus", "aux";
-		resets = <&gcc GCC_PCIE_0_BCR>;
-		reset-names = "core";
-		power-domains = <&gcc PCIE0_GDSC>;
-		vdda-supply = <&pma8084_l3>;
-		phys = <&pciephy0>;
-		phy-names = "pciephy";
-		perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>;
-		pinctrl-0 = <&pcie0_pins_default>;
-		pinctrl-names = "default";
-	};
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
new file mode 100644
index 000000000000..81971be4e554
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -0,0 +1,953 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCI express root complex
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+  Qualcomm PCIe root complex controller is based on the Synopsys DesignWare
+  PCIe IP.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - qcom,pcie-apq8064
+          - qcom,pcie-apq8084
+          - qcom,pcie-ipq4019
+          - qcom,pcie-ipq6018
+          - qcom,pcie-ipq8064
+          - qcom,pcie-ipq8064-v2
+          - qcom,pcie-ipq8074
+          - qcom,pcie-ipq8074-gen3
+          - qcom,pcie-msm8996
+          - qcom,pcie-qcs404
+          - qcom,pcie-sa8540p
+          - qcom,pcie-sc7280
+          - qcom,pcie-sc8180x
+          - qcom,pcie-sc8280xp
+          - qcom,pcie-sdm845
+          - qcom,pcie-sdx55
+          - qcom,pcie-sm8150
+          - qcom,pcie-sm8250
+          - qcom,pcie-sm8350
+          - qcom,pcie-sm8450-pcie0
+          - qcom,pcie-sm8450-pcie1
+          - qcom,pcie-sm8550
+      - items:
+          - const: qcom,pcie-msm8998
+          - const: qcom,pcie-msm8996
+
+  reg:
+    minItems: 4
+    maxItems: 6
+
+  reg-names:
+    minItems: 4
+    maxItems: 6
+
+  interrupts:
+    minItems: 1
+    maxItems: 8
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 8
+
+  iommu-map:
+    maxItems: 2
+
+  # Common definitions for clocks, clock-names and reset.
+  # Platform constraints are described later.
+  clocks:
+    minItems: 3
+    maxItems: 13
+
+  clock-names:
+    minItems: 3
+    maxItems: 13
+
+  dma-coherent: true
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    items:
+      - const: pcie-mem
+      - const: cpu-pcie
+
+  resets:
+    minItems: 1
+    maxItems: 12
+
+  resets-names:
+    minItems: 1
+    maxItems: 12
+
+  vdda-supply:
+    description: A phandle to the core analog power supply
+
+  vdda_phy-supply:
+    description: A phandle to the core analog power supply for PHY
+
+  vdda_refclk-supply:
+    description: A phandle to the core analog power supply for IC which generates reference clock
+
+  vddpe-3v3-supply:
+    description: A phandle to the PCIe endpoint power supply
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    items:
+      - const: pciephy
+
+  power-domains:
+    maxItems: 1
+
+  perst-gpios:
+    description: GPIO controlled connection to PERST# signal
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO controlled connection to WAKE# signal
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupt-map-mask
+  - interrupt-map
+  - clocks
+  - clock-names
+
+anyOf:
+  - required:
+      - interrupts
+      - interrupt-names
+      - "#interrupt-cells"
+  - required:
+      - msi-map
+      - msi-map-mask
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-ipq4019
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064v2
+              - qcom,pcie-ipq8074
+              - qcom,pcie-qcs404
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 4
+        reg-names:
+          items:
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: parf # Qualcomm specific registers
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq6018
+              - qcom,pcie-ipq8074-gen3
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 5
+        reg-names:
+          items:
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: atu # ATU address space
+            - const: parf # Qualcomm specific registers
+            - const: config # PCIe configuration space
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8084
+              - qcom,pcie-msm8996
+              - qcom,pcie-sdm845
+    then:
+      properties:
+        reg:
+          minItems: 4
+          maxItems: 5
+        reg-names:
+          minItems: 4
+          items:
+            - const: parf # Qualcomm specific registers
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: config # PCIe configuration space
+            - const: mhi # MHI registers
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc7280
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sc8280xp
+              - qcom,pcie-sdx55
+              - qcom,pcie-sm8250
+              - qcom,pcie-sm8350
+              - qcom,pcie-sm8450-pcie0
+              - qcom,pcie-sm8450-pcie1
+              - qcom,pcie-sm8550
+    then:
+      properties:
+        reg:
+          minItems: 5
+          maxItems: 6
+        reg-names:
+          minItems: 5
+          items:
+            - const: parf # Qualcomm specific registers
+            - const: dbi # DesignWare PCIe registers
+            - const: elbi # External local bus interface registers
+            - const: atu # ATU address space
+            - const: config # PCIe configuration space
+            - const: mhi # MHI registers
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064v2
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 5
+        clock-names:
+          minItems: 3
+          items:
+            - const: core # Clocks the pcie hw block
+            - const: iface # Configuration AHB clock
+            - const: phy # Clocks the pcie PHY block
+            - const: aux # Clocks the pcie AUX block, not on apq8064
+            - const: ref # Clocks the pcie ref block, not on apq8064
+        resets:
+          minItems: 5
+          maxItems: 6
+        reset-names:
+          minItems: 5
+          items:
+            - const: axi # AXI reset
+            - const: ahb # AHB reset
+            - const: por # POR reset
+            - const: pci # PCI reset
+            - const: phy # PHY reset
+            - const: ext # EXT reset, not on apq8064
+      required:
+        - vdda-supply
+        - vdda_phy-supply
+        - vdda_refclk-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8084
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: iface # Configuration AHB clock
+            - const: master_bus # Master AXI clock
+            - const: slave_bus # Slave AXI clock
+            - const: aux # Auxiliary (AUX) clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: core # Core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq4019
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: aux # Auxiliary (AUX) clock
+            - const: master_bus # Master AXI clock
+            - const: slave_bus # Slave AXI clock
+        resets:
+          minItems: 12
+          maxItems: 12
+        reset-names:
+          items:
+            - const: axi_m # AXI master reset
+            - const: axi_s # AXI slave reset
+            - const: pipe # PIPE reset
+            - const: axi_m_vmid # VMID reset
+            - const: axi_s_xpu # XPU reset
+            - const: parf # PARF reset
+            - const: phy # PHY reset
+            - const: axi_m_sticky # AXI sticky reset
+            - const: pipe_sticky # PIPE sticky reset
+            - const: pwr # PWR reset
+            - const: ahb # AHB reset
+            - const: phy_ahb # PHY AHB reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-msm8996
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: pipe # Pipe Clock driving internal logic
+            - const: aux # Auxiliary (AUX) clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+        resets: false
+        reset-names: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq8074
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: iface # PCIe to SysNOC BIU clock
+            - const: axi_m # AXI Master clock
+            - const: axi_s # AXI Slave clock
+            - const: ahb # AHB clock
+            - const: aux # Auxiliary clock
+        resets:
+          minItems: 7
+          maxItems: 7
+        reset-names:
+          items:
+            - const: pipe # PIPE reset
+            - const: sleep # Sleep reset
+            - const: sticky # Core Sticky reset
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: ahb # AHB Reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-ipq6018
+              - qcom,pcie-ipq8074-gen3
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: iface # PCIe to SysNOC BIU clock
+            - const: axi_m # AXI Master clock
+            - const: axi_s # AXI Slave clock
+            - const: axi_bridge # AXI bridge clock
+            - const: rchng
+        resets:
+          minItems: 8
+          maxItems: 8
+        reset-names:
+          items:
+            - const: pipe # PIPE reset
+            - const: sleep # Sleep reset
+            - const: sticky # Core Sticky reset
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: ahb # AHB Reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+            - const: axi_s_sticky # AXI Slave Sticky reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-qcs404
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: iface # AHB clock
+            - const: aux # Auxiliary clock
+            - const: master_bus # AXI Master clock
+            - const: slave_bus # AXI Slave clock
+        resets:
+          minItems: 6
+          maxItems: 6
+        reset-names:
+          items:
+            - const: axi_m # AXI Master reset
+            - const: axi_s # AXI Slave reset
+            - const: axi_m_sticky # AXI Master Sticky reset
+            - const: pipe_sticky # PIPE sticky reset
+            - const: pwr # PWR reset
+            - const: ahb # AHB reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc7280
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: tbu # PCIe TBU clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sdm845
+    then:
+      oneOf:
+          # Unfortunately the "optional" ref clock is used in the middle of the list
+        - properties:
+            clocks:
+              minItems: 8
+              maxItems: 8
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: ref # REFERENCE clock
+                - const: tbu # PCIe TBU clock
+        - properties:
+            clocks:
+              minItems: 7
+              maxItems: 7
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: tbu # PCIe TBU clock
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sm8150
+              - qcom,pcie-sm8250
+    then:
+      oneOf:
+          # Unfortunately the "optional" ref clock is used in the middle of the list
+        - properties:
+            clocks:
+              minItems: 9
+              maxItems: 9
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: ref # REFERENCE clock
+                - const: tbu # PCIe TBU clock
+                - const: ddrss_sf_tbu # PCIe SF TBU clock
+        - properties:
+            clocks:
+              minItems: 8
+              maxItems: 8
+            clock-names:
+              items:
+                - const: pipe # PIPE clock
+                - const: aux # Auxiliary clock
+                - const: cfg # Configuration clock
+                - const: bus_master # Master AXI clock
+                - const: bus_slave # Slave AXI clock
+                - const: slave_q2a # Slave Q2A clock
+                - const: tbu # PCIe TBU clock
+                - const: ddrss_sf_tbu # PCIe SF TBU clock
+      properties:
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8350
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 9
+        clock-names:
+          minItems: 8
+          items:
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: tbu # PCIe TBU clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+            - const: aggre0 # Aggre NoC PCIe0 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8450-pcie0
+    then:
+      properties:
+        clocks:
+          minItems: 12
+          maxItems: 12
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre0 # Aggre NoC PCIe0 AXI clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8450-pcie1
+    then:
+      properties:
+        clocks:
+          minItems: 11
+          maxItems: 11
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: pipe_mux # PIPE MUX
+            - const: phy_pipe # PIPE output clock
+            - const: ref # REFERENCE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: aggre1 # Aggre NoC PCIe1 AXI clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sm8550
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 8
+        clock-names:
+          minItems: 7
+          items:
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: noc_aggr # Aggre NoC PCIe AXI clock
+            - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+        resets:
+          minItems: 1
+          maxItems: 2
+        reset-names:
+          minItems: 1
+          items:
+            - const: pci # PCIe core reset
+            - const: link_down # PCIe link down reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sa8540p
+              - qcom,pcie-sc8280xp
+    then:
+      properties:
+        clocks:
+          minItems: 8
+          maxItems: 9
+        clock-names:
+          minItems: 8
+          items:
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: ddrss_sf_tbu # PCIe SF TBU clock
+            - const: noc_aggr_4 # NoC aggregate 4 clock
+            - const: noc_aggr_south_sf # NoC aggregate South SF clock
+            - const: cnoc_qx # Configuration NoC QX clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sdx55
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: pipe # PIPE clock
+            - const: aux # Auxiliary clock
+            - const: cfg # Configuration clock
+            - const: bus_master # Master AXI clock
+            - const: bus_slave # Slave AXI clock
+            - const: slave_q2a # Slave Q2A clock
+            - const: sleep # PCIe Sleep clock
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: pci # PCIe core reset
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sa8540p
+              - qcom,pcie-sc8280xp
+    then:
+      required:
+        - interconnects
+        - interconnect-names
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,pcie-apq8064
+                - qcom,pcie-ipq4019
+                - qcom,pcie-ipq8064
+                - qcom,pcie-ipq8064v2
+                - qcom,pcie-ipq8074
+                - qcom,pcie-ipq8074-gen3
+                - qcom,pcie-qcs404
+    then:
+      required:
+        - power-domains
+
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,pcie-msm8996
+    then:
+      required:
+        - resets
+        - reset-names
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-msm8996
+              - qcom,pcie-sc7280
+              - qcom,pcie-sc8180x
+              - qcom,pcie-sdm845
+              - qcom,pcie-sm8150
+              - qcom,pcie-sm8250
+              - qcom,pcie-sm8350
+              - qcom,pcie-sm8450-pcie0
+              - qcom,pcie-sm8450-pcie1
+              - qcom,pcie-sm8550
+    then:
+      oneOf:
+        - properties:
+            interrupts:
+              maxItems: 1
+            interrupt-names:
+              items:
+                - const: msi
+        - properties:
+            interrupts:
+              minItems: 8
+            interrupt-names:
+              items:
+                - const: msi0
+                - const: msi1
+                - const: msi2
+                - const: msi3
+                - const: msi4
+                - const: msi5
+                - const: msi6
+                - const: msi7
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-sc8280xp
+    then:
+      properties:
+        interrupts:
+          minItems: 4
+          maxItems: 4
+        interrupt-names:
+          items:
+            - const: msi0
+            - const: msi1
+            - const: msi2
+            - const: msi3
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pcie-apq8064
+              - qcom,pcie-apq8084
+              - qcom,pcie-ipq4019
+              - qcom,pcie-ipq6018
+              - qcom,pcie-ipq8064
+              - qcom,pcie-ipq8064-v2
+              - qcom,pcie-ipq8074
+              - qcom,pcie-ipq8074-gen3
+              - qcom,pcie-qcs404
+              - qcom,pcie-sa8540p
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: msi
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pcie@1b500000 {
+      compatible = "qcom,pcie-ipq8064";
+      reg = <0x1b500000 0x1000>,
+            <0x1b502000 0x80>,
+            <0x1b600000 0x100>,
+            <0x0ff00000 0x100000>;
+      reg-names = "dbi", "elbi", "parf", "config";
+      device_type = "pci";
+      linux,pci-domain = <0>;
+      bus-range = <0x00 0xff>;
+      num-lanes = <1>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>,
+               <0x82000000 0 0 0x08000000 0 0x07e00000>;
+      interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "msi";
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&gcc 41>,
+               <&gcc 43>,
+               <&gcc 44>,
+               <&gcc 42>,
+               <&gcc 248>;
+      clock-names = "core", "iface", "phy", "aux", "ref";
+      resets = <&gcc 27>,
+               <&gcc 26>,
+               <&gcc 25>,
+               <&gcc 24>,
+               <&gcc 23>,
+               <&gcc 22>;
+      reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+      pinctrl-0 = <&pcie_pins_default>;
+      pinctrl-names = "default";
+      vdda-supply = <&pm8921_s3>;
+      vdda_phy-supply = <&pm8921_lvs6>;
+      vdda_refclk-supply = <&ext_3p3v>;
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+    pcie@fc520000 {
+      compatible = "qcom,pcie-apq8084";
+      reg = <0xfc520000 0x2000>,
+            <0xff000000 0x1000>,
+            <0xff001000 0x1000>,
+            <0xff002000 0x2000>;
+      reg-names = "parf", "dbi", "elbi", "config";
+      device_type = "pci";
+      linux,pci-domain = <0>;
+      bus-range = <0x00 0xff>;
+      num-lanes = <1>;
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0          0xff200000 0 0x00100000>,
+               <0x82000000 0 0x00300000 0xff300000 0 0x00d00000>;
+      interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "msi";
+      #interrupt-cells = <1>;
+      interrupt-map-mask = <0 0 0 0x7>;
+      interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>,
+                      <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&gcc 324>,
+               <&gcc 325>,
+               <&gcc 327>,
+               <&gcc 323>;
+      clock-names = "iface", "master_bus", "slave_bus", "aux";
+      resets = <&gcc 81>;
+      reset-names = "core";
+      power-domains = <&gcc 1>;
+      vdda-supply = <&pma8084_l3>;
+      phys = <&pciephy0>;
+      phy-names = "pciephy";
+      perst-gpios = <&tlmm 70 GPIO_ACTIVE_LOW>;
+      pinctrl-0 = <&pcie0_pins_default>;
+      pinctrl-names = "default";
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
index 295840cf612f..32a3b7665ff5 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
@@ -19,6 +19,7 @@ properties:
           - renesas,r8a774b1-pcie-ep     # RZ/G2N
           - renesas,r8a774c0-pcie-ep     # RZ/G2E
           - renesas,r8a774e1-pcie-ep     # RZ/G2H
+          - renesas,r8a7795-pcie-ep      # R-Car H3
       - const: renesas,rcar-gen3-pcie-ep # R-Car Gen3 and RZ/G2
 
   reg:
diff --git a/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml
new file mode 100644
index 000000000000..5a0d64d3ae6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/renesas,pci-rcar-gen2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas AHB to PCI bridge
+
+maintainers:
+  - Marek Vasut <marek.vasut+renesas@gmail.com>
+  - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+description: |
+  This is the bridge used internally to connect the USB controllers to the
+  AHB. There is one bridge instance per USB port connected to the internal
+  OHCI and EHCI controllers.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,pci-r8a7742      # RZ/G1H
+              - renesas,pci-r8a7743      # RZ/G1M
+              - renesas,pci-r8a7744      # RZ/G1N
+              - renesas,pci-r8a7745      # RZ/G1E
+              - renesas,pci-r8a7790      # R-Car H2
+              - renesas,pci-r8a7791      # R-Car M2-W
+              - renesas,pci-r8a7793      # R-Car M2-N
+              - renesas,pci-r8a7794      # R-Car E2
+          - const: renesas,pci-rcar-gen2 # R-Car Gen2 and RZ/G1
+      - items:
+          - enum:
+              - renesas,pci-r9a06g032     # RZ/N1D
+          - const: renesas,pci-rzn1       # RZ/N1
+
+  reg:
+    items:
+      - description: Operational registers for the OHCI/EHCI controllers.
+      - description: Bridge configuration and control registers.
+
+  interrupts:
+    maxItems: 1
+
+  clocks: true
+
+  clock-names: true
+
+  resets:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  bus-range:
+    description: |
+      The PCI bus number range; as this is a single bus, the range
+      should be specified as the same value twice.
+
+  dma-ranges:
+    description: |
+      A single range for the inbound memory region. If not supplied,
+      defaults to 1GiB at 0x40000000. Note there are hardware restrictions on
+      the allowed combinations of address and size.
+    maxItems: 1
+
+patternProperties:
+  '^usb@[0-1],0$':
+    type: object
+
+    description:
+      This a USB controller PCI device
+
+    properties:
+      reg:
+        description:
+          Identify the correct bus, device and function number in the
+          form <bdf 0 0 0 0>.
+
+        items:
+          minItems: 5
+          maxItems: 5
+
+      phys:
+        description:
+          Reference to the USB phy
+        maxItems: 1
+
+      phy-names:
+        maxItems: 1
+
+    required:
+      - reg
+      - phys
+      - phy-names
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-map
+  - interrupt-map-mask
+  - clocks
+  - power-domains
+  - bus-range
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,pci-rzn1
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Internal bus clock (AHB) for HOST
+            - description: Internal bus clock (AHB) Power Management
+            - description: PCI clock for USB subsystem
+        clock-names:
+          items:
+            - const: hclkh
+            - const: hclkpm
+            - const: pciclk
+      required:
+        - clock-names
+    else:
+      properties:
+        clocks:
+          items:
+            - description: Device clock
+        clock-names:
+          items:
+            - const: pclk
+      required:
+        - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+    #include <dt-bindings/power/r8a7790-sysc.h>
+
+    pci@ee090000  {
+        compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
+        device_type = "pci";
+        reg = <0xee090000 0xc00>,
+              <0xee080000 0x1100>;
+        clocks = <&cpg CPG_MOD 703>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 703>;
+        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+        bus-range = <0 0>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <1>;
+        ranges = <0x02000000 0 0xee080000 0xee080000 0 0x00010000>;
+        dma-ranges = <0x42000000 0 0x40000000 0x40000000 0 0x40000000>;
+        interrupt-map-mask = <0xf800 0 0 0x7>;
+        interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                        <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+        usb@1,0 {
+            reg = <0x800 0 0 0 0>;
+            phys = <&usb0 0>;
+            phy-names = "usb";
+        };
+
+        usb@2,0 {
+            reg = <0x1000 0 0 0 0>;
+            phys = <&usb0 0>;
+            phy-names = "usb";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-common.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-common.yaml
new file mode 100644
index 000000000000..a8574f8a84a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-common.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip AXI PCIe Bridge Common Properties
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+
+properties:
+  reg:
+    maxItems: 2
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: aclk
+      - const: aclk-perf
+      - const: hclk
+      - const: pm
+
+  num-lanes:
+    maximum: 4
+
+  phys:
+    oneOf:
+      - maxItems: 1
+      - maxItems: 4
+
+  phy-names:
+    oneOf:
+      - const: pcie-phy
+      - items:
+          - const: pcie-phy-0
+          - const: pcie-phy-1
+          - const: pcie-phy-2
+          - const: pcie-phy-3
+
+  resets:
+    maxItems: 7
+
+  reset-names:
+    items:
+      - const: core
+      - const: mgmt
+      - const: mgmt-sticky
+      - const: pipe
+      - const: pm
+      - const: pclk
+      - const: aclk
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - phys
+  - phy-names
+  - resets
+  - reset-names
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml
new file mode 100644
index 000000000000..88386a6d7011
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip AXI PCIe Endpoint
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-ep.yaml#
+  - $ref: rockchip,rk3399-pcie-common.yaml#
+
+properties:
+  compatible:
+    const: rockchip,rk3399-pcie-ep
+
+  reg: true
+
+  reg-names:
+    items:
+      - const: apb-base
+      - const: mem-base
+
+  rockchip,max-outbound-regions:
+    description: Maximum number of outbound regions
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 32
+    default: 32
+
+required:
+  - rockchip,max-outbound-regions
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/rk3399-cru.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie-ep@f8000000 {
+            compatible = "rockchip,rk3399-pcie-ep";
+            reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>;
+            reg-names = "apb-base", "mem-base";
+            clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+              <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+            clock-names = "aclk", "aclk-perf",
+                    "hclk", "pm";
+            max-functions = /bits/ 8 <8>;
+            num-lanes = <4>;
+            resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+              <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+              <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+            reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+                    "pm", "pclk", "aclk";
+            phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
+            phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
+            rockchip,max-outbound-regions = <16>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
new file mode 100644
index 000000000000..531008f0b6ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip AXI PCIe Root Port Bridge Host
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: rockchip,rk3399-pcie-common.yaml#
+
+properties:
+  compatible:
+    const: rockchip,rk3399-pcie
+
+  reg: true
+
+  reg-names:
+    items:
+      - const: axi-base
+      - const: apb-base
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: sys
+      - const: legacy
+      - const: client
+
+  aspm-no-l0s:
+    description: This property is needed if using 24MHz OSC for RC's PHY.
+
+  ep-gpios:
+    description: pre-reset GPIO
+
+  vpcie12v-supply:
+    description: The 12v regulator to use for PCIe.
+
+  vpcie3v3-supply:
+    description: The 3.3v regulator to use for PCIe.
+
+  vpcie1v8-supply:
+    description: The 1.8v regulator to use for PCIe.
+
+  vpcie0v9-supply:
+    description: The 0.9v regulator to use for PCIe.
+
+  interrupt-controller:
+    type: object
+    additionalProperties: false
+
+    properties:
+      '#address-cells':
+        const: 0
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupt-controller: true
+
+required:
+  - ranges
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-controller
+  - interrupt-map
+  - interrupt-map-mask
+  - msi-map
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/rk3399-cru.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@f8000000 {
+            compatible = "rockchip,rk3399-pcie";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+              <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+            clock-names = "aclk", "aclk-perf",
+                    "hclk", "pm";
+            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+                  <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+                  <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
+            interrupt-names = "sys", "legacy", "client";
+            ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+            ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
+                0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
+            num-lanes = <4>;
+            msi-map = <0x0 &its 0x0 0x1000>;
+            reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>;
+            reg-names = "axi-base", "apb-base";
+            resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+              <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+              <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+            reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+                    "pm", "pclk", "aclk";
+            /* deprecated legacy PHY model */
+            phys = <&pcie_phy>;
+            phy-names = "pcie-phy";
+            pinctrl-names = "default";
+            pinctrl-0 = <&pcie_clkreq>;
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+                <0 0 0 2 &pcie0_intc 1>,
+                <0 0 0 3 &pcie0_intc 2>,
+                <0 0 0 4 &pcie0_intc 3>;
+
+            pcie0_intc: interrupt-controller {
+                interrupt-controller;
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
new file mode 100644
index 000000000000..24c88942e59e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare based PCIe controller on Rockchip SoCs
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+  - Simon Xue <xxm@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |+
+  RK3568 SoC PCIe host controller is based on the Synopsys DesignWare
+  PCIe IP and thus inherits all the common properties defined in
+  snps,dw-pcie.yaml.
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3568-pcie
+      - items:
+          - enum:
+              - rockchip,rk3588-pcie
+          - const: rockchip,rk3568-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers
+      - description: Rockchip designed configuration registers
+      - description: Config registers
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: apb
+      - const: config
+
+  clocks:
+    items:
+      - description: AHB clock for PCIe master
+      - description: AHB clock for PCIe slave
+      - description: AHB clock for PCIe dbi
+      - description: APB clock for PCIe
+      - description: Auxiliary clock for PCIe
+
+  clock-names:
+    items:
+      - const: aclk_mst
+      - const: aclk_slv
+      - const: aclk_dbi
+      - const: pclk
+      - const: aux
+
+  msi-map: true
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  power-domains:
+    maxItems: 1
+
+  ranges:
+    maxItems: 2
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: pipe
+
+  vpcie3v3-supply: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - msi-map
+  - num-lanes
+  - phys
+  - phy-names
+  - power-domains
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie3x2: pcie@fe280000 {
+            compatible = "rockchip,rk3568-pcie";
+            reg = <0x3 0xc0800000 0x0 0x390000>,
+                  <0x0 0xfe280000 0x0 0x10000>,
+                  <0x3 0x80000000 0x0 0x100000>;
+            reg-names = "dbi", "apb", "config";
+            bus-range = <0x20 0x2f>;
+            clocks = <&cru 143>, <&cru 144>,
+                     <&cru 145>, <&cru 146>,
+                     <&cru 147>;
+            clock-names = "aclk_mst", "aclk_slv",
+                          "aclk_dbi", "pclk",
+                          "aux";
+            device_type = "pci";
+            linux,pci-domain = <2>;
+            max-link-speed = <2>;
+            msi-map = <0x2000 &its 0x2000 0x1000>;
+            num-lanes = <2>;
+            phys = <&pcie30phy>;
+            phy-names = "pcie-phy";
+            power-domains = <&power 15>;
+            ranges = <0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000>,
+                     <0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>;
+            resets = <&cru 193>;
+            reset-names = "pipe";
+            #address-cells = <3>;
+            #size-cells = <2>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt
deleted file mode 100644
index 778467307a93..000000000000
--- a/Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-* Rockchip AXI PCIe Endpoint Controller DT description
-
-Required properties:
-- compatible: Should contain "rockchip,rk3399-pcie-ep"
-- reg: Two register ranges as listed in the reg-names property
-- reg-names: Must include the following names
-	- "apb-base"
-	- "mem-base"
-- clocks: Must contain an entry for each entry in clock-names.
-		See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-	- "aclk"
-	- "aclk-perf"
-	- "hclk"
-	- "pm"
-- resets: Must contain seven entries for each entry in reset-names.
-	   See ../reset/reset.txt for details.
-- reset-names: Must include the following names
-	- "core"
-	- "mgmt"
-	- "mgmt-sticky"
-	- "pipe"
-	- "pm"
-	- "aclk"
-	- "pclk"
-- pinctrl-names : The pin control state names
-- pinctrl-0: The "default" pinctrl state
-- phys: Must contain an phandle to a PHY for each entry in phy-names.
-- phy-names: Must include 4 entries for all 4 lanes even if some of
-  them won't be used for your cases. Entries are of the form "pcie-phy-N":
-  where N ranges from 0 to 3.
-  (see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt
-  for changing the #phy-cells of phy node to support it)
-- rockchip,max-outbound-regions: Maximum number of outbound regions
-
-Optional Property:
-- num-lanes: number of lanes to use
-- max-functions: Maximum number of functions that can be configured (default 1).
-
-pcie0-ep: pcie@f8000000 {
-	compatible = "rockchip,rk3399-pcie-ep";
-	#address-cells = <3>;
-	#size-cells = <2>;
-	rockchip,max-outbound-regions = <16>;
-	clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
-		 <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
-	clock-names = "aclk", "aclk-perf",
-		      "hclk", "pm";
-	max-functions = /bits/ 8 <8>;
-	num-lanes = <4>;
-	reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>;
-	reg-names = "apb-base", "mem-base";
-	resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
-		 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
-		 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
-	reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
-		      "pm", "pclk", "aclk";
-	phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
-	phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_clkreq>;
-};
diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt
deleted file mode 100644
index af34c65773fd..000000000000
--- a/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt
+++ /dev/null
@@ -1,135 +0,0 @@
-* Rockchip AXI PCIe Root Port Bridge DT description
-
-Required properties:
-- #address-cells: Address representation for root ports, set to <3>
-- #size-cells: Size representation for root ports, set to <2>
-- #interrupt-cells: specifies the number of cells needed to encode an
-		interrupt source. The value must be 1.
-- compatible: Should contain "rockchip,rk3399-pcie"
-- reg: Two register ranges as listed in the reg-names property
-- reg-names: Must include the following names
-	- "axi-base"
-	- "apb-base"
-- clocks: Must contain an entry for each entry in clock-names.
-		See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-	- "aclk"
-	- "aclk-perf"
-	- "hclk"
-	- "pm"
-- msi-map: Maps a Requester ID to an MSI controller and associated
-	msi-specifier data. See ./pci-msi.txt
-- interrupts: Three interrupt entries must be specified.
-- interrupt-names: Must include the following names
-	- "sys"
-	- "legacy"
-	- "client"
-- resets: Must contain seven entries for each entry in reset-names.
-	   See ../reset/reset.txt for details.
-- reset-names: Must include the following names
-	- "core"
-	- "mgmt"
-	- "mgmt-sticky"
-	- "pipe"
-	- "pm"
-	- "aclk"
-	- "pclk"
-- pinctrl-names : The pin control state names
-- pinctrl-0: The "default" pinctrl state
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-- interrupt-map-mask and interrupt-map: standard PCI properties
-
-Required properties for legacy PHY model (deprecated):
-- phys: From PHY bindings: Phandle for the Generic PHY for PCIe.
-- phy-names:  MUST be "pcie-phy".
-
-Required properties for per-lane PHY model (preferred):
-- phys: Must contain an phandle to a PHY for each entry in phy-names.
-- phy-names: Must include 4 entries for all 4 lanes even if some of
-  them won't be used for your cases. Entries are of the form "pcie-phy-N":
-  where N ranges from 0 to 3.
-  (see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt
-  for changing the #phy-cells of phy node to support it)
-
-Optional Property:
-- aspm-no-l0s: RC won't support ASPM L0s. This property is needed if
-	using 24MHz OSC for RC's PHY.
-- ep-gpios: contain the entry for pre-reset GPIO
-- num-lanes: number of lanes to use
-- vpcie12v-supply: The phandle to the 12v regulator to use for PCIe.
-- vpcie3v3-supply: The phandle to the 3.3v regulator to use for PCIe.
-- vpcie1v8-supply: The phandle to the 1.8v regulator to use for PCIe.
-- vpcie0v9-supply: The phandle to the 0.9v regulator to use for PCIe.
-
-*Interrupt controller child node*
-The core controller provides a single interrupt for legacy INTx. The PCIe node
-should contain an interrupt controller node as a target for the PCI
-'interrupt-map' property. This node represents the domain at which the four
-INTx interrupts are decoded and routed.
-
-
-Required properties for Interrupt controller child node:
-- interrupt-controller: identifies the node as an interrupt controller
-- #address-cells: specifies the number of cells needed to encode an
-	address. The value must be 0.
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-
-Example:
-
-pcie0: pcie@f8000000 {
-	compatible = "rockchip,rk3399-pcie";
-	#address-cells = <3>;
-	#size-cells = <2>;
-	clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
-		 <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
-	clock-names = "aclk", "aclk-perf",
-		      "hclk", "pm";
-	bus-range = <0x0 0x1>;
-	interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
-		     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
-		     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
-	interrupt-names = "sys", "legacy", "client";
-	assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
-	assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
-	assigned-clock-rates = <100000000>;
-	ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
-	ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
-		  0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
-	num-lanes = <4>;
-	msi-map = <0x0 &its 0x0 0x1000>;
-	reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>;
-	reg-names = "axi-base", "apb-base";
-	resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
-		 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
-		 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
-	reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
-		      "pm", "pclk", "aclk";
-	/* deprecated legacy PHY model */
-	phys = <&pcie_phy>;
-	phy-names = "pcie-phy";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_clkreq>;
-	#interrupt-cells = <1>;
-	interrupt-map-mask = <0 0 0 7>;
-	interrupt-map = <0 0 0 1 &pcie0_intc 0>,
-			<0 0 0 2 &pcie0_intc 1>,
-			<0 0 0 3 &pcie0_intc 2>,
-			<0 0 0 4 &pcie0_intc 3>;
-	pcie0_intc: interrupt-controller {
-		interrupt-controller;
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-	};
-};
-
-pcie0: pcie@f8000000 {
-	...
-
-	/* preferred per-lane PHY model */
-	phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
-	phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
index 445eed94b53f..f20ed7e709f7 100644
--- a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Samsung SoC series PCIe Host Controller Device Tree Bindings
+title: Samsung SoC series PCIe Host Controller
 
 maintainers:
   - Marek Szyprowski <m.szyprowski@samsung.com>
diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
index 2b9d1d6fc661..844fc7142302 100644
--- a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
@@ -32,6 +32,8 @@ properties:
       - const: config
       - const: mgmt
 
+  dma-coherent: true
+
   num-lanes:
     const: 8
 
@@ -49,6 +51,12 @@ properties:
     description: A phandle to the PCIe power up reset line.
     maxItems: 1
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: pcie_aux
+
   pwren-gpios:
     description: Should specify the GPIO for controlling the PCI bus device power on.
     maxItems: 1
@@ -61,11 +69,10 @@ required:
   - num-lanes
   - interrupts
   - interrupt-names
-  - interrupt-parent
   - interrupt-map-mask
   - interrupt-map
-  - clock-names
   - clocks
+  - clock-names
   - resets
   - pwren-gpios
   - reset-gpios
@@ -105,7 +112,7 @@ examples:
                             <0x0 0x0 0x0 0x3 &plic0 59>,
                             <0x0 0x0 0x0 0x4 &plic0 60>;
             clock-names = "pcie_aux";
-            clocks = <&prci PRCI_CLK_PCIE_AUX>;
+            clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
             resets = <&prci 4>;
             pwren-gpios = <&gpio 5 0>;
             reset-gpios = <&gpio 8 0>;
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
new file mode 100644
index 000000000000..d87e13496834
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
@@ -0,0 +1,266 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC PCIe RP/EP controller
+
+maintainers:
+  - Jingoo Han <jingoohan1@gmail.com>
+  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description:
+  Generic Synopsys DesignWare PCIe Root Port and Endpoint controller
+  properties.
+
+select: false
+
+properties:
+  reg:
+    description:
+      DWC PCIe CSR space is normally accessed over the dedicated Data Bus
+      Interface - DBI. In accordance with the reference manual the register
+      configuration space belongs to the Configuration-Dependent Module (CDM)
+      and is split up into several sub-parts Standard PCIe configuration
+      space, Port Logic Registers (PL), Shadow Config-space Registers,
+      iATU/eDMA registers. The particular sub-space is selected by the
+      CDM/ELBI (dbi_cs) and CS2 (dbi_cs2) signals (selector bits). Such
+      configuration provides a flexible interface for the system engineers to
+      either map the particular space at a desired MMIO address or just leave
+      them in a contiguous memory space if pure Native or AXI Bridge DBI access
+      is selected. Note the PCIe CFG-space, PL and Shadow registers are
+      specific for each activated function, while the rest of the sub-spaces
+      are common for all of them (if there are more than one).
+    minItems: 2
+    maxItems: 6
+
+  reg-names:
+    minItems: 2
+    maxItems: 6
+
+  interrupts:
+    description:
+      There are two main sub-blocks which are normally capable of
+      generating interrupts. It's System Information Interface and MSI
+      interface. While the former one has some common for the Host and
+      Endpoint controllers IRQ-signals, the later interface is obviously
+      Root Complex specific since it's responsible for the incoming MSI
+      messages signalling. The System Information IRQ signals are mainly
+      responsible for reporting the generic PCIe hierarchy and Root
+      Complex events like VPD IO request, general AER, PME, Hot-plug, link
+      bandwidth change, link equalization request, INTx asserted/deasserted
+      Message detection, embedded DMA Tx/Rx/Error.
+    minItems: 1
+    maxItems: 26
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 26
+
+  clocks:
+    description:
+      DWC PCIe reference manual explicitly defines a set of the clocks required
+      to get the controller working correctly. In general all of them can
+      be divided into two groups':' application and core clocks. Note the
+      platforms may have some of the clock sources unspecified in case if the
+      corresponding domains are fed up from a common clock source.
+    minItems: 1
+    maxItems: 7
+
+  clock-names:
+    minItems: 1
+    maxItems: 7
+    items:
+      oneOf:
+        - description:
+            Data Bus Interface (DBI) clock. Clock signal for the AXI-bus
+            interface of the Configuration-Dependent Module, which is
+            basically the set of the controller CSRs.
+          const: dbi
+        - description:
+            Application AXI-bus Master interface clock. Basically this is
+            a clock for the controller DMA interface (PCI-to-CPU).
+          const: mstr
+        - description:
+            Application AXI-bus Slave interface clock. This is a clock for
+            the CPU-to-PCI memory IO interface.
+          const: slv
+        - description:
+            Controller Core-PCS PIPE interface clock. It's normally
+            supplied by an external PCS-PHY.
+          const: pipe
+        - description:
+            Controller Primary clock. It's assumed that all controller input
+            signals (except resets) are synchronous to this clock.
+          const: core
+        - description:
+            Auxiliary clock for the controller PMC domain. The controller
+            partitioning implies having some parts to operate with this
+            clock in some power management states.
+          const: aux
+        - description:
+            Generic reference clock. In case if there are several
+            interfaces fed up with a common clock source it's advisable to
+            define it with this name (for instance pipe, core and aux can
+            be connected to a single source of the periodic signal).
+          const: ref
+        - description:
+            Clock for the PHY registers interface. Originally this is
+            a PHY-viewport-based interface, but some platform may have
+            specifically designed one.
+          const: phy_reg
+        - description:
+            Vendor-specific clock names. Consider using the generic names
+            above for new bindings.
+          oneOf:
+            - description: See native 'dbi' clock for details
+              enum: [ pcie, pcie_apb_sys, aclk_dbi ]
+            - description: See native 'mstr/slv' clock for details
+              enum: [ pcie_bus, pcie_inbound_axi, pcie_aclk, aclk_mst, aclk_slv ]
+            - description: See native 'pipe' clock for details
+              enum: [ pcie_phy, pcie_phy_ref, link ]
+            - description: See native 'aux' clock for details
+              enum: [ pcie_aux ]
+            - description: See native 'ref' clock for details.
+              enum: [ gio ]
+            - description: See nativs 'phy_reg' clock for details
+              enum: [ pcie_apb_phy, pclk ]
+
+  resets:
+    description:
+      DWC PCIe reference manual explicitly defines a set of the reset
+      signals required to be de-asserted to properly activate the controller
+      sub-parts. All of these signals can be divided into two sub-groups':'
+      application and core resets with respect to the main sub-domains they
+      are supposed to reset. Note the platforms may have some of these signals
+      unspecified in case if they are automatically handled or aggregated into
+      a comprehensive control module.
+    minItems: 1
+    maxItems: 10
+
+  reset-names:
+    minItems: 1
+    maxItems: 10
+    items:
+      oneOf:
+        - description: Data Bus Interface (DBI) domain reset
+          const: dbi
+        - description: AXI-bus Master interface reset
+          const: mstr
+        - description: AXI-bus Slave interface reset
+          const: slv
+        - description: Application-dependent interface reset
+          const: app
+        - description: Controller Non-sticky CSR flags reset
+          const: non-sticky
+        - description: Controller sticky CSR flags reset
+          const: sticky
+        - description: PIPE-interface (Core-PCS) logic reset
+          const: pipe
+        - description:
+            Controller primary reset (resets everything except PMC module)
+          const: core
+        - description: PCS/PHY block reset
+          const: phy
+        - description: PMC hot reset signal
+          const: hot
+        - description: Cold reset signal
+          const: pwr
+        - description:
+            Vendor-specific reset names. Consider using the generic names
+            above for new bindings.
+          oneOf:
+            - description: See native 'app' reset for details
+              enum: [ apps, gio, apb ]
+            - description: See native 'phy' reset for details
+              enum: [ pciephy, link ]
+            - description: See native 'pwr' reset for details
+              enum: [ turnoff ]
+
+  phys:
+    description:
+      There can be up to the number of possible lanes PHYs specified placed in
+      the phandle array in the line-based order. Obviously each the specified
+      PHYs are supposed to be able to work in the PCIe mode with a speed
+      implied by the DWC PCIe controller they are attached to.
+    minItems: 1
+    maxItems: 16
+
+  phy-names:
+    minItems: 1
+    maxItems: 16
+    oneOf:
+      - description: Generic PHY names
+        items:
+          pattern: '^pcie[0-9]+$'
+      - description:
+          Vendor-specific PHY names. Consider using the generic
+          names above for new bindings.
+        items:
+          oneOf:
+            - pattern: '^pcie(-?phy[0-9]*)?$'
+            - pattern: '^p2u-[0-7]$'
+
+  reset-gpio:
+    deprecated: true
+    description:
+      Reference to the GPIO-controlled PERST# signal. It is used to reset all
+      the peripheral devices available on the PCIe bus.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reference to the GPIO-controlled PERST# signal. It is used to reset all
+      the peripheral devices available on the PCIe bus.
+    maxItems: 1
+
+  max-link-speed:
+    maximum: 5
+
+  num-lanes:
+    description:
+      Number of PCIe link lanes to use. Can be omitted if the already brought
+      up link is supposed to be preserved.
+    maximum: 16
+
+  num-ob-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of outbound address translation windows. This parameter can be
+      auto-detected based on the iATU memory writability. So there is no
+      point in having a dedicated DT-property for it.
+    maximum: 256
+
+  num-ib-windows:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of inbound address translation windows. In the same way as
+      for the outbound AT windows, this parameter can be auto-detected based
+      on the iATU memory writability. There is no point having a dedicated
+      DT-property for it either.
+    maximum: 256
+
+  num-viewport:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    deprecated: true
+    description:
+      Number of outbound view ports configured in hardware. It's the same as
+      the number of outbound AT windows.
+    maximum: 256
+
+  snps,enable-cdm-check:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable automatic checking of CDM (Configuration Dependent Module)
+      registers for data corruption. CDM registers include standard PCIe
+      configuration space registers, Port Logic registers, DMA and iATU
+      registers. This feature has been available since DWC PCIe v4.80a.
+
+  dma-coherent: true
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
index b5935b1b153f..8fc2151691a4 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
@@ -13,78 +13,182 @@ maintainers:
 description: |
   Synopsys DesignWare PCIe host controller endpoint
 
+# Please create a separate DT-schema for your DWC PCIe Endpoint controller
+# and make sure it's assigned with the vendor-specific compatible string.
+select:
+  properties:
+    compatible:
+      const: snps,dw-pcie-ep
+  required:
+    - compatible
+
 allOf:
   - $ref: /schemas/pci/pci-ep.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
 
 properties:
-  compatible:
-    anyOf:
-      - {}
-      - const: snps,dw-pcie-ep
-
   reg:
-    description: |
-      It should contain Data Bus Interface (dbi) and config registers for all
-      versions.
-      For designware core version >= 4.80, it may contain ATU address space.
+    description:
+      DBI, DBI2 reg-spaces and outbound memory window are required for the
+      normal controller functioning. iATU memory IO region is also required
+      if the space is unrolled (IP-core version >= 4.80a).
     minItems: 2
-    maxItems: 4
+    maxItems: 5
 
   reg-names:
     minItems: 2
-    maxItems: 4
+    maxItems: 5
+    items:
+      oneOf:
+        - description:
+            Basic DWC PCIe controller configuration-space accessible over
+            the DBI interface. This memory space is either activated with
+            CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region
+            with all spaces. Note iATU/eDMA CSRs are indirectly accessible
+            via the PL viewports on the DWC PCIe controllers older than
+            v4.80a.
+          const: dbi
+        - description:
+            Shadow DWC PCIe config-space registers. This space is selected
+            by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of
+            the PCI-SIG PCIe CFG-space with the shadow registers for some
+            PCI Header space, PCI Standard and Extended Structures. It's
+            mainly relevant for the end-point controller configuration,
+            but still there are some shadow registers available for the
+            Root Port mode too.
+          const: dbi2
+        - description:
+            External Local Bus registers. It's an application-dependent
+            registers normally defined by the platform engineers. The space
+            can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can
+            be accessed over some platform-specific means (for instance
+            as a part of a system controller).
+          enum: [ elbi, app ]
+        - description:
+            iATU/eDMA registers common for all device functions. It's an
+            unrolled memory space with the internal Address Translation
+            Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1
+            and CS2 = 1. For IP-core releases prior v4.80a, these registers
+            have been programmed via an indirect addressing scheme using a
+            set of viewport CSRs mapped into the PL space. Note iATU is
+            normally mapped to the 0x0 address of this region, while eDMA
+            is available at 0x80000 base address.
+          const: atu
+        - description:
+            Platform-specific eDMA registers. Some platforms may have eDMA
+            CSRs mapped in a non-standard base address. The registers offset
+            can be changed or the MS/LS-bits of the address can be attached
+            in an additional RTL block before the MEM-IO transactions reach
+            the DW PCIe slave interface.
+          const: dma
+        - description:
+            PHY/PCS configuration registers. Some platforms can have the
+            PCS and PHY CSRs accessible over a dedicated memory mapped
+            region, but mainly these registers are indirectly accessible
+            either by means of the embedded PHY viewport schema or by some
+            platform-specific method.
+          const: phy
+        - description:
+            Outbound iATU-capable memory-region which will be used to
+            generate various application-specific traffic on the PCIe bus
+            hierarchy. It's usage scenario depends on the endpoint
+            functionality, for instance it can be used to create MSI(X)
+            messages.
+          const: addr_space
+        - description:
+            Vendor-specific CSR names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native 'elbi/app' CSR region for details.
+              enum: [ link, appl ]
+            - description: See native 'atu' CSR region for details.
+              enum: [ atu_dma ]
+    allOf:
+      - contains:
+          const: dbi
+      - contains:
+          const: addr_space
+
+  interrupts:
+    description:
+      There is no mandatory IRQ signals for the normal controller functioning,
+      but in addition to the native set the platforms may have a link- or
+      PM-related IRQs specified.
+    minItems: 1
+    maxItems: 20
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 20
     items:
-      enum: [dbi, dbi2, config, atu, addr_space, link, atu_dma, appl]
-
-  reset-gpio:
-    description: GPIO pin number of PERST# signal
-    maxItems: 1
-    deprecated: true
-
-  reset-gpios:
-    description: GPIO controlled connection to PERST# signal
-    maxItems: 1
-
-  snps,enable-cdm-check:
-    type: boolean
-    description: |
-      This is a boolean property and if present enables
-      automatic checking of CDM (Configuration Dependent Module) registers
-      for data corruption. CDM registers include standard PCIe configuration
-      space registers, Port Logic registers, DMA and iATU (internal Address
-      Translation Unit) registers.
-
-  num-ib-windows:
-    description: number of inbound address translation windows
-    maxItems: 1
-    deprecated: true
-
-  num-ob-windows:
-    description: number of outbound address translation windows
-    maxItems: 1
-    deprecated: true
+      oneOf:
+        - description:
+            Controller request to read or write virtual product data
+            from/to the VPD capability registers.
+          const: vpd
+        - description:
+            Link Equalization Request flag is set in the Link Status 2
+            register (applicable if the corresponding IRQ is enabled in
+            the Link Control 3 register).
+          const: l_eq
+        - description:
+            Indicates that the eDMA Tx/Rx transfer is complete or that an
+            error has occurred on the corresponding channel. eDMA can have
+            eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
+            to 16 IRQ signals all together. Write eDMA channels shall go
+            first in the ordered row as per default edma_int[*] bus setup.
+          pattern: '^dma([0-9]|1[0-5])?$'
+        - description:
+            PCIe protocol correctable error or a Data Path protection
+            correctable error is detected by the automotive/safety
+            feature.
+          const: sft_ce
+        - description:
+            Indicates that the internal safety mechanism has detected an
+            uncorrectable error.
+          const: sft_ue
+        - description:
+            Application-specific IRQ raised depending on the vendor-specific
+            events basis.
+          const: app
+        - description:
+            Vendor-specific IRQ names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native "app" IRQ for details
+              enum: [ intr ]
 
   max-functions:
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: maximum number of functions that can be configured
+    maximum: 32
 
 required:
+  - compatible
   - reg
   - reg-names
-  - compatible
 
-unevaluatedProperties: false
+additionalProperties: true
 
 examples:
   - |
-    bus {
-      #address-cells = <1>;
-      #size-cells = <1>;
-      pcie-ep@dfd00000 {
-        compatible = "snps,dw-pcie-ep";
-        reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
-              <0xdfc01000 0x0001000>, /* IP registers 2 */
-              <0xd0000000 0x2000000>; /* Configuration space */
-        reg-names = "dbi", "dbi2", "addr_space";
-      };
+    pcie-ep@dfd00000 {
+      compatible = "snps,dw-pcie-ep";
+      reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
+            <0xdfc01000 0x0001000>, /* IP registers 2 */
+            <0xd0000000 0x2000000>; /* Configuration space */
+      reg-names = "dbi", "dbi2", "addr_space";
+
+      interrupts = <23>, <24>;
+      interrupt-names = "dma0", "dma1";
+
+      clocks = <&sys_clk 12>, <&sys_clk 24>;
+      clock-names = "dbi", "ref";
+
+      resets = <&sys_rst 12>, <&sys_rst 24>;
+      reset-names = "dbi", "phy";
+
+      phys = <&pcie_phy0>, <&pcie_phy1>, <&pcie_phy2>, <&pcie_phy3>;
+      phy-names = "pcie0", "pcie1", "pcie2", "pcie3";
+
+      max-link-speed = <3>;
+      max-functions = /bits/ 8 <4>;
     };
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
index 9ed0dfba7f89..1a83f0f65f19 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -13,20 +13,25 @@ maintainers:
 description: |
   Synopsys DesignWare PCIe host controller
 
+# Please create a separate DT-schema for your DWC PCIe Root Port controller
+# and make sure it's assigned with the vendor-specific compatible string.
+select:
+  properties:
+    compatible:
+      const: snps,dw-pcie
+  required:
+    - compatible
+
 allOf:
   - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
 
 properties:
-  compatible:
-    anyOf:
-      - {}
-      - const: snps,dw-pcie
-
   reg:
-    description: |
-      It should contain Data Bus Interface (dbi) and config registers for all
-      versions.
-      For designware core version >= 4.80, it may contain ATU address space.
+    description:
+      At least DBI reg-space and peripheral devices CFG-space outbound window
+      are required for the normal controller work. iATU memory IO region is
+      also required if the space is unrolled (IP-core version >= 4.80a).
     minItems: 2
     maxItems: 5
 
@@ -34,69 +39,194 @@ properties:
     minItems: 2
     maxItems: 5
     items:
-      enum: [ dbi, dbi2, config, atu, app, elbi, mgmt, ctrl, parf, cfg, link,
-              ulreg, smu, mpu, apb, phy ]
-
-  num-lanes:
-    description: |
-      number of lanes to use (this property should be specified unless
-      the link is brought already up in firmware)
-    maximum: 16
-
-  reset-gpio:
-    description: GPIO pin number of PERST# signal
-    maxItems: 1
-    deprecated: true
-
-  reset-gpios:
-    description: GPIO controlled connection to PERST# signal
-    maxItems: 1
-
-  interrupts: true
-
-  interrupt-names: true
-
-  clocks: true
-
-  snps,enable-cdm-check:
-    type: boolean
-    description: |
-      This is a boolean property and if present enables
-      automatic checking of CDM (Configuration Dependent Module) registers
-      for data corruption. CDM registers include standard PCIe configuration
-      space registers, Port Logic registers, DMA and iATU (internal Address
-      Translation Unit) registers.
-
-  num-viewport:
-    description: |
-      number of view ports configured in hardware. If a platform
-      does not specify it, the driver autodetects it.
-    deprecated: true
-
-unevaluatedProperties: false
+      oneOf:
+        - description:
+            Basic DWC PCIe controller configuration-space accessible over
+            the DBI interface. This memory space is either activated with
+            CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region
+            with all spaces. Note iATU/eDMA CSRs are indirectly accessible
+            via the PL viewports on the DWC PCIe controllers older than
+            v4.80a.
+          const: dbi
+        - description:
+            Shadow DWC PCIe config-space registers. This space is selected
+            by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of
+            the PCI-SIG PCIe CFG-space with the shadow registers for some
+            PCI Header space, PCI Standard and Extended Structures. It's
+            mainly relevant for the end-point controller configuration,
+            but still there are some shadow registers available for the
+            Root Port mode too.
+          const: dbi2
+        - description:
+            External Local Bus registers. It's an application-dependent
+            registers normally defined by the platform engineers. The space
+            can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can
+            be accessed over some platform-specific means (for instance
+            as a part of a system controller).
+          enum: [ elbi, app ]
+        - description:
+            iATU/eDMA registers common for all device functions. It's an
+            unrolled memory space with the internal Address Translation
+            Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1
+            and CS2 = 1. For IP-core releases prior v4.80a, these registers
+            have been programmed via an indirect addressing scheme using a
+            set of viewport CSRs mapped into the PL space. Note iATU is
+            normally mapped to the 0x0 address of this region, while eDMA
+            is available at 0x80000 base address.
+          const: atu
+        - description:
+            Platform-specific eDMA registers. Some platforms may have eDMA
+            CSRs mapped in a non-standard base address. The registers offset
+            can be changed or the MS/LS-bits of the address can be attached
+            in an additional RTL block before the MEM-IO transactions reach
+            the DW PCIe slave interface.
+          const: dma
+        - description:
+            PHY/PCS configuration registers. Some platforms can have the
+            PCS and PHY CSRs accessible over a dedicated memory mapped
+            region, but mainly these registers are indirectly accessible
+            either by means of the embedded PHY viewport schema or by some
+            platform-specific method.
+          const: phy
+        - description:
+            Outbound iATU-capable memory-region which will be used to access
+            the peripheral PCIe devices configuration space.
+          const: config
+        - description:
+            Vendor-specific CSR names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native 'elbi/app' CSR region for details.
+              enum: [ apb, mgmt, link, ulreg, appl ]
+            - description: See native 'atu' CSR region for details.
+              enum: [ atu_dma ]
+            - description: Syscon-related CSR regions.
+              enum: [ smu, mpu ]
+            - description: Tegra234 aperture
+              enum: [ ecam ]
+    allOf:
+      - contains:
+          const: dbi
+      - contains:
+          const: config
+
+  interrupts:
+    description:
+      DWC PCIe Root Port/Complex specific IRQ signals. At least MSI interrupt
+      signal is supposed to be specified for the host controller.
+    minItems: 1
+    maxItems: 26
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 26
+    items:
+      oneOf:
+        - description:
+            Controller request to read or write virtual product data
+            from/to the VPD capability registers.
+          const: vpd
+        - description:
+            Link Equalization Request flag is set in the Link Status 2
+            register (applicable if the corresponding IRQ is enabled in
+            the Link Control 3 register).
+          const: l_eq
+        - description:
+            Indicates that the eDMA Tx/Rx transfer is complete or that an
+            error has occurred on the corresponding channel. eDMA can have
+            eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
+            to 16 IRQ signals all together. Write eDMA channels shall go
+            first in the ordered row as per default edma_int[*] bus setup.
+          pattern: '^dma([0-9]|1[0-5])?$'
+        - description:
+            PCIe protocol correctable error or a Data Path protection
+            correctable error is detected by the automotive/safety
+            feature.
+          const: sft_ce
+        - description:
+            Indicates that the internal safety mechanism has detected an
+            uncorrectable error.
+          const: sft_ue
+        - description:
+            Application-specific IRQ raised depending on the vendor-specific
+            events basis.
+          const: app
+        - description:
+            DSP AXI MSI Interrupt detected. It gets de-asserted when there is
+            no more MSI interrupt pending. The interrupt is relevant to the
+            iMSI-RX - Integrated MSI Receiver (AXI bridge).
+          const: msi
+        - description:
+            Legacy A/B/C/D interrupt signal. Basically it's triggered by
+            receiving a Assert_INT{A,B,C,D}/Desassert_INT{A,B,C,D} message
+            from the downstream device.
+          pattern: "^int(a|b|c|d)$"
+        - description:
+            Error condition detected and a flag is set in the Root Error Status
+            register of the AER capability. It's asserted when the RC
+            internally generated an error or an error message is received by
+            the RC.
+          const: aer
+        - description:
+            PME message is received by the port. That means having the PME
+            status bit set in the Root Status register (the event is
+            supposed to be unmasked in the Root Control register).
+          const: pme
+        - description:
+            Hot-plug event is detected. That is a bit has been set in the
+            Slot Status register and the corresponding event is enabled in
+            the Slot Control register.
+          const: hp
+        - description:
+            Link Autonomous Bandwidth Status flag has been set in the Link
+            Status register (the event is supposed to be unmasked in the
+            Link Control register).
+          const: bw_au
+        - description:
+            Bandwidth Management Status flag has been set in the Link
+            Status register (the event is supposed to be unmasked in the
+            Link Control register).
+          const: bw_mg
+        - description:
+            Vendor-specific IRQ names. Consider using the generic names above
+            for new bindings.
+          oneOf:
+            - description: See native "app" IRQ for details
+              enum: [ intr ]
+    allOf:
+      - contains:
+          const: msi
+
+additionalProperties: true
 
 required:
+  - compatible
   - reg
   - reg-names
-  - compatible
 
 examples:
   - |
-    bus {
-      #address-cells = <1>;
-      #size-cells = <1>;
-      pcie@dfc00000 {
-        device_type = "pci";
-        compatible = "snps,dw-pcie";
-        reg = <0xdfc00000 0x0001000>, /* IP registers */
-              <0xd0000000 0x0002000>; /* Configuration space */
-        reg-names = "dbi", "config";
-        #address-cells = <3>;
-        #size-cells = <2>;
-        ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
-                 <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
-        interrupts = <25>, <24>;
-        #interrupt-cells = <1>;
-        num-lanes = <1>;
-      };
+    pcie@dfc00000 {
+      compatible = "snps,dw-pcie";
+      device_type = "pci";
+      reg = <0xdfc00000 0x0001000>, /* IP registers */
+            <0xd0000000 0x0002000>; /* Configuration space */
+      reg-names = "dbi", "config";
+      #address-cells = <3>;
+      #size-cells = <2>;
+      ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
+               <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
+      bus-range = <0x0 0xff>;
+
+      interrupts = <25>, <24>;
+      interrupt-names = "msi", "hp";
+      #interrupt-cells = <1>;
+
+      reset-gpios = <&port0 0 1>;
+
+      phys = <&pcie_phy>;
+      phy-names = "pcie";
+
+      num-lanes = <1>;
+      max-link-speed = <3>;
     };
diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
index 144cbcd60a1c..f0d8e486a07d 100644
--- a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
@@ -15,46 +15,36 @@ description: |
 maintainers:
   - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
 
-allOf:
-  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
-
 properties:
   compatible:
-    const: socionext,uniphier-pro5-pcie-ep
+    enum:
+      - socionext,uniphier-pro5-pcie-ep
+      - socionext,uniphier-nx1-pcie-ep
 
   reg:
     minItems: 4
     maxItems: 5
 
   reg-names:
-    oneOf:
-      - items:
-          - const: dbi
-          - const: dbi2
-          - const: link
-          - const: addr_space
-      - items:
-          - const: dbi
-          - const: dbi2
-          - const: link
-          - const: addr_space
-          - const: atu
+    minItems: 4
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: link
+      - const: addr_space
+      - const: atu
 
   clocks:
+    minItems: 1
     maxItems: 2
 
-  clock-names:
-    items:
-      - const: gio
-      - const: link
+  clock-names: true
 
   resets:
+    minItems: 1
     maxItems: 2
 
-  reset-names:
-    items:
-      - const: gio
-      - const: link
+  reset-names: true
 
   num-ib-windows:
     const: 16
@@ -70,6 +60,46 @@ properties:
   phy-names:
     const: pcie-phy
 
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: socionext,uniphier-pro5-pcie-ep
+    then:
+      properties:
+        reg:
+          maxItems: 4
+        reg-names:
+          maxItems: 4
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: gio
+            - const: link
+        resets:
+          minItems: 2
+        reset-names:
+          items:
+            - const: gio
+            - const: link
+    else:
+      properties:
+        reg:
+          minItems: 5
+        reg-names:
+          minItems: 5
+        clocks:
+          maxItems: 1
+        clock-names:
+          const: link
+        resets:
+          maxItems: 1
+        reset-names:
+          const: link
+
 required:
   - compatible
   - reg
@@ -79,7 +109,7 @@ required:
   - resets
   - reset-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
new file mode 100644
index 000000000000..638b99db0433
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe host controller
+
+description: |
+  UniPhier PCIe host controller is based on the Synopsys DesignWare
+  PCI core. It shares common features with the PCIe DesignWare core and
+  inherits common properties defined in
+  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+maintainers:
+  - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    enum:
+      - socionext,uniphier-pcie
+
+  reg:
+    minItems: 3
+    maxItems: 4
+
+  reg-names:
+    minItems: 3
+    items:
+      - const: dbi
+      - const: link
+      - const: config
+      - const: atu
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  num-viewport: true
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  interrupt-controller:
+    type: object
+    additionalProperties: false
+
+    properties:
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupts:
+        maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    bus {
+        gic: interrupt-controller {
+            interrupt-controller;
+            #interrupt-cells = <3>;
+        };
+    };
+
+    pcie: pcie@66000000 {
+        compatible = "socionext,uniphier-pcie";
+        reg-names = "dbi", "link", "config";
+        reg = <0x66000000 0x1000>, <0x66010000 0x10000>, <0x2fff0000 0x10000>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        clocks = <&sys_clk 24>;
+        resets = <&sys_rst 24>;
+        num-lanes = <1>;
+        num-viewport = <1>;
+        bus-range = <0x0 0xff>;
+        device_type = "pci";
+        ranges = <0x81000000 0 0x00000000  0x2ffe0000  0 0x00010000>,
+                 <0x82000000 0 0x00000000  0x20000000  0 0x0ffe0000>;
+        phy-names = "pcie-phy";
+        phys = <&pcie_phy>;
+        #interrupt-cells = <1>;
+        interrupt-names = "dma", "msi";
+        interrupt-parent = <&gic>;
+        interrupts = <0 224 4>, <0 225 4>;
+        interrupt-map-mask = <0 0 0  7>;
+        interrupt-map = <0 0 0  1  &pcie_intc 0>,
+                        <0 0 0  2  &pcie_intc 1>,
+                        <0 0 0  3  &pcie_intc 2>,
+                        <0 0 0  4  &pcie_intc 3>;
+
+        pcie_intc: interrupt-controller {
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            interrupt-parent = <&gic>;
+            interrupts = <0 226 4>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml
index 78c217d362a7..74195c1f5292 100644
--- a/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml
@@ -32,8 +32,12 @@ properties:
     maxItems: 1
 
   ti,syscon-pcie-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
     description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
-    $ref: /schemas/types.yaml#/definitions/phandle
 
   interrupts:
     minItems: 1
@@ -65,9 +69,7 @@ examples:
                <0x5506000 0x1000>;
         reg-names = "app", "dbics", "addr_space", "atu";
         power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
-        ti,syscon-pcie-mode = <&pcie0_mode>;
-        num-ib-windows = <16>;
-        num-ob-windows = <16>;
+        ti,syscon-pcie-mode = <&scm_conf 0x4060>;
         max-link-speed = <2>;
         dma-coherent;
         interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
index 834dc1c1743c..a20dccbafd94 100644
--- a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
@@ -29,16 +29,27 @@ properties:
       - const: config
       - const: atu
 
+  interrupts:
+    maxItems: 1
+
   power-domains:
     maxItems: 1
 
   ti,syscon-pcie-id:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_device_id register offset within SYSCON
     description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID
-    $ref: /schemas/types.yaml#/definitions/phandle
 
   ti,syscon-pcie-mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: Phandle to the SYSCON entry
+          - description: pcie_ctrl register offset within SYSCON
     description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
-    $ref: /schemas/types.yaml#/definitions/phandle
 
   msi-map: true
 
@@ -84,10 +95,9 @@ examples:
         #size-cells = <2>;
         ranges = <0x81000000 0 0          0x10020000 0 0x00010000>,
                  <0x82000000 0 0x10030000 0x10030000 0 0x07FD0000>;
-        ti,syscon-pcie-id = <&pcie_devid>;
-        ti,syscon-pcie-mode = <&pcie0_mode>;
+        ti,syscon-pcie-id = <&scm_conf 0x0210>;
+        ti,syscon-pcie-mode = <&scm_conf 0x4060>;
         bus-range = <0x0 0xff>;
-        num-viewport = <16>;
         max-link-speed = <2>;
         dma-coherent;
         interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
index aed437dac363..62292185fe2e 100644
--- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-ep.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/pci/ti,j721e-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TI J721E PCI EP (PCIe Wrapper)
 
@@ -11,7 +11,7 @@ maintainers:
   - Kishon Vijay Abraham I <kishon@ti.com>
 
 allOf:
-  - $ref: "cdns-pcie-ep.yaml#"
+  - $ref: cdns-pcie-ep.yaml#
 
 properties:
   compatible:
@@ -58,6 +58,13 @@ properties:
   dma-coherent:
     description: Indicates that the PCIe IP block can ensure the coherency
 
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: link_state
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
index cc900202df29..a2c5eaea57f5 100644
--- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -2,8 +2,8 @@
 # Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: TI J721E PCI Host (PCIe Wrapper)
 
@@ -11,7 +11,7 @@ maintainers:
   - Kishon Vijay Abraham I <kishon@ti.com>
 
 allOf:
-  - $ref: "cdns-pcie-host.yaml#"
+  - $ref: cdns-pcie-host.yaml#
 
 properties:
   compatible:
@@ -60,20 +60,40 @@ properties:
       - const: fck
       - const: pcie_refclk
 
+  dma-coherent: true
+
   vendor-id:
     const: 0x104c
 
   device-id:
-    oneOf:
-      - items:
-          - const: 0xb00d
-      - items:
-          - const: 0xb00f
-      - items:
-          - const: 0xb010
+    enum:
+      - 0xb00d
+      - 0xb00f
+      - 0xb010
+      - 0xb013
 
   msi-map: true
 
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    items:
+      - const: link_state
+
+  interrupt-controller:
+    type: object
+    additionalProperties: false
+
+    properties:
+      interrupt-controller: true
+
+      '#interrupt-cells':
+        const: 1
+
+      interrupts:
+        maxItems: 1
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
index 30b6396d83c8..53da2edd7c9a 100644
--- a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Toshiba Visconti5 SoC PCIe Host Controller Device Tree Bindings
+title: Toshiba Visconti5 SoC PCIe Host Controller
 
 maintainers:
   - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
@@ -36,7 +36,7 @@ properties:
       - const: mpu
 
   interrupts:
-    maxItems: 1
+    maxItems: 2
 
   clocks:
     items:
@@ -94,8 +94,9 @@ examples:
             #interrupt-cells = <1>;
             ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
                      <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
-            interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
-            interrupt-names = "intr";
+            interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi", "intr";
             interrupt-map-mask = <0 0 0 7>;
             interrupt-map =
                 <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
diff --git a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt b/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
deleted file mode 100644
index 359585db049f..000000000000
--- a/Documentation/devicetree/bindings/pci/uniphier-pcie.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Socionext UniPhier PCIe host controller bindings
-
-This describes the devicetree bindings for PCIe host controller implemented
-on Socionext UniPhier SoCs.
-
-UniPhier PCIe host controller is based on the Synopsys DesignWare PCI core.
-It shares common functions with the PCIe DesignWare core driver and inherits
-common properties defined in
-Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
-
-Required properties:
-- compatible: Should be "socionext,uniphier-pcie".
-- reg: Specifies offset and length of the register set for the device.
-	According to the reg-names, appropriate register sets are required.
-- reg-names: Must include the following entries:
-    "dbi"    - controller configuration registers
-    "link"   - SoC-specific glue layer registers
-    "config" - PCIe configuration space
-    "atu"    - iATU registers for DWC version 4.80 or later
-- clocks: A phandle to the clock gate for PCIe glue layer including
-	the host controller.
-- resets: A phandle to the reset line for PCIe glue layer including
-	the host controller.
-- interrupts: A list of interrupt specifiers. According to the
-	interrupt-names, appropriate interrupts are required.
-- interrupt-names: Must include the following entries:
-    "dma" - DMA interrupt
-    "msi" - MSI interrupt
-
-Optional properties:
-- phys: A phandle to generic PCIe PHY. According to the phy-names, appropriate
-	phys are required.
-- phy-names: Must be "pcie-phy".
-
-Required sub-node:
-- legacy-interrupt-controller: Specifies interrupt controller for legacy PCI
-	interrupts.
-
-Required properties for legacy-interrupt-controller:
-- interrupt-controller: identifies the node as an interrupt controller.
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-- interrupt-parent: Phandle to the parent interrupt controller.
-- interrupts: An interrupt specifier for legacy interrupt.
-
-Example:
-
-	pcie: pcie@66000000 {
-		compatible = "socionext,uniphier-pcie", "snps,dw-pcie";
-		status = "disabled";
-		reg-names = "dbi", "link", "config";
-		reg = <0x66000000 0x1000>, <0x66010000 0x10000>,
-		      <0x2fff0000 0x10000>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		clocks = <&sys_clk 24>;
-		resets = <&sys_rst 24>;
-		num-lanes = <1>;
-		num-viewport = <1>;
-		bus-range = <0x0 0xff>;
-		device_type = "pci";
-		ranges =
-		/* downstream I/O */
-			<0x81000000 0 0x00000000  0x2ffe0000  0 0x00010000
-		/* non-prefetchable memory */
-			 0x82000000 0 0x00000000  0x20000000  0 0x0ffe0000>;
-		#interrupt-cells = <1>;
-		interrupt-names = "dma", "msi";
-		interrupts = <0 224 4>, <0 225 4>;
-		interrupt-map-mask = <0 0 0  7>;
-		interrupt-map = <0 0 0  1  &pcie_intc 0>,	/* INTA */
-				<0 0 0  2  &pcie_intc 1>,	/* INTB */
-				<0 0 0  3  &pcie_intc 2>,	/* INTC */
-				<0 0 0  4  &pcie_intc 3>;	/* INTD */
-
-		pcie_intc: legacy-interrupt-controller {
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			interrupt-parent = <&gic>;
-			interrupts = <0 226 4>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
deleted file mode 100644
index f56f8c58c5d9..000000000000
--- a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-* Xilinx NWL PCIe Root Port Bridge DT description
-
-Required properties:
-- compatible: Should contain "xlnx,nwl-pcie-2.11"
-- #address-cells: Address representation for root ports, set to <3>
-- #size-cells: Size representation for root ports, set to <2>
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-- reg: Should contain Bridge, PCIe Controller registers location,
-	configuration space, and length
-- reg-names: Must include the following entries:
-	"breg": bridge registers
-	"pcireg": PCIe controller registers
-	"cfg": configuration space region
-- device_type: must be "pci"
-- interrupts: Should contain NWL PCIe interrupt
-- interrupt-names: Must include the following entries:
-	"msi1, msi0": interrupt asserted when an MSI is received
-	"intx": interrupt asserted when a legacy interrupt is received
-	"misc": interrupt asserted when miscellaneous interrupt is received
-- interrupt-map-mask and interrupt-map: standard PCI properties to define the
-	mapping of the PCI interface to interrupt numbers.
-- ranges: ranges for the PCI memory regions (I/O space region is not
-	supported by hardware)
-	Please refer to the standard PCI bus binding document for a more
-	detailed explanation
-- msi-controller: indicates that this is MSI controller node
-- msi-parent:  MSI parent of the root complex itself
-- legacy-interrupt-controller: Interrupt controller device node for Legacy
-	interrupts
-	- interrupt-controller: identifies the node as an interrupt controller
-	- #interrupt-cells: should be set to 1
-	- #address-cells: specifies the number of cells needed to encode an
-		address. The value must be 0.
-
-Optional properties:
-- dma-coherent: present if DMA operations are coherent
-- clocks: Input clock specifier. Refer to common clock bindings
-
-Example:
-++++++++
-
-nwl_pcie: pcie@fd0e0000 {
-	#address-cells = <3>;
-	#size-cells = <2>;
-	compatible = "xlnx,nwl-pcie-2.11";
-	#interrupt-cells = <1>;
-	msi-controller;
-	device_type = "pci";
-	interrupt-parent = <&gic>;
-	interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
-	interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
-	interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-	interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
-			<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
-			<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
-			<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
-
-	msi-parent = <&nwl_pcie>;
-	reg = <0x0 0xfd0e0000 0x0 0x1000>,
-	      <0x0 0xfd480000 0x0 0x1000>,
-	      <0x80 0x00000000 0x0 0x1000000>;
-	reg-names = "breg", "pcireg", "cfg";
-	ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000  /* non-prefetchable memory */
-		  0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */
-
-	pcie_intc: legacy-interrupt-controller {
-		interrupt-controller;
-		#address-cells = <0>;
-		#interrupt-cells = <1>;
-	};
-
-};
diff --git a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
deleted file mode 100644
index fd57a81180a4..000000000000
--- a/Documentation/devicetree/bindings/pci/xilinx-pcie.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-* Xilinx AXI PCIe Root Port Bridge DT description
-
-Required properties:
-- #address-cells: Address representation for root ports, set to <3>
-- #size-cells: Size representation for root ports, set to <2>
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-- compatible: Should contain "xlnx,axi-pcie-host-1.00.a"
-- reg: Should contain AXI PCIe registers location and length
-- device_type: must be "pci"
-- interrupts: Should contain AXI PCIe interrupt
-- interrupt-map-mask,
-  interrupt-map: standard PCI properties to define the mapping of the
-	PCI interface to interrupt numbers.
-- ranges: ranges for the PCI memory regions (I/O space region is not
-	supported by hardware)
-	Please refer to the standard PCI bus binding document for a more
-	detailed explanation
-
-Optional properties for Zynq/Microblaze:
-- bus-range: PCI bus numbers covered
-
-Interrupt controller child node
-+++++++++++++++++++++++++++++++
-Required properties:
-- interrupt-controller: identifies the node as an interrupt controller
-- #address-cells: specifies the number of cells needed to encode an
-	address. The value must be 0.
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-
-NOTE:
-The core provides a single interrupt for both INTx/MSI messages. So,
-created a interrupt controller node to support 'interrupt-map' DT
-functionality.  The driver will create an IRQ domain for this map, decode
-the four INTx interrupts in ISR and route them to this domain.
-
-
-Example:
-++++++++
-Zynq:
-	pci_express: axi-pcie@50000000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		compatible = "xlnx,axi-pcie-host-1.00.a";
-		reg = < 0x50000000 0x1000000 >;
-		device_type = "pci";
-		interrupts = < 0 52 4 >;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc 1>,
-				<0 0 0 2 &pcie_intc 2>,
-				<0 0 0 3 &pcie_intc 3>,
-				<0 0 0 4 &pcie_intc 4>;
-		ranges = < 0x02000000 0 0x60000000 0x60000000 0 0x10000000 >;
-
-		pcie_intc: interrupt-controller {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-		};
-	};
-
-
-Microblaze:
-	pci_express: axi-pcie@10000000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		compatible = "xlnx,axi-pcie-host-1.00.a";
-		reg = <0x10000000 0x4000000>;
-		device_type = "pci";
-		interrupt-parent = <&microblaze_0_intc>;
-		interrupts = <1 2>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 1 &pcie_intc 1>,
-				<0 0 0 2 &pcie_intc 2>,
-				<0 0 0 3 &pcie_intc 3>,
-				<0 0 0 4 &pcie_intc 4>;
-		ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x10000000>;
-
-		pcie_intc: interrupt-controller {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
-		};
-
-	};
diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
index a2bbc0eb7220..24ddc2855b94 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
+++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
@@ -14,17 +14,23 @@ allOf:
 
 properties:
   compatible:
-    const: xlnx,versal-cpm-host-1.00
+    enum:
+      - xlnx,versal-cpm-host-1.00
+      - xlnx,versal-cpm5-host
 
   reg:
     items:
-      - description: Configuration space region and bridge registers.
       - description: CPM system level control and status registers.
+      - description: Configuration space region and bridge registers.
+      - description: CPM5 control and status registers.
+    minItems: 2
 
   reg-names:
     items:
-      - const: cfg
       - const: cpm_slcr
+      - const: cfg
+      - const: cpm_csr
+    minItems: 2
 
   interrupts:
     maxItems: 1
@@ -55,7 +61,6 @@ required:
   - reg-names
   - "#interrupt-cells"
   - interrupts
-  - interrupt-parent
   - interrupt-map
   - interrupt-map-mask
   - bus-range
@@ -87,13 +92,43 @@ examples:
                        ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
                                 <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
                        msi-map = <0x0 &its_gic 0x0 0x10000>;
-                       reg = <0x6 0x00000000 0x0 0x10000000>,
-                             <0x0 0xfca10000 0x0 0x1000>;
-                       reg-names = "cfg", "cpm_slcr";
+                       reg = <0x0 0xfca10000 0x0 0x1000>,
+                             <0x6 0x00000000 0x0 0x10000000>;
+                       reg-names = "cpm_slcr", "cfg";
                        pcie_intc_0: interrupt-controller {
                                #address-cells = <0>;
                                #interrupt-cells = <1>;
                                interrupt-controller;
                        };
                };
+
+               cpm5_pcie: pcie@fcdd0000 {
+                       compatible = "xlnx,versal-cpm5-host";
+                       device_type = "pci";
+                       #address-cells = <3>;
+                       #interrupt-cells = <1>;
+                       #size-cells = <2>;
+                       interrupts = <0 72 4>;
+                       interrupt-parent = <&gic>;
+                       interrupt-map-mask = <0 0 0 7>;
+                       interrupt-map = <0 0 0 1 &pcie_intc_1 0>,
+                                       <0 0 0 2 &pcie_intc_1 1>,
+                                       <0 0 0 3 &pcie_intc_1 2>,
+                                       <0 0 0 4 &pcie_intc_1 3>;
+                       bus-range = <0x00 0xff>;
+                       ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+                                <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
+                       msi-map = <0x0 &its_gic 0x0 0x10000>;
+                       reg = <0x00 0xfcdd0000 0x00 0x1000>,
+                             <0x06 0x00000000 0x00 0x1000000>,
+                             <0x00 0xfce20000 0x00 0x1000000>;
+                       reg-names = "cpm_slcr", "cfg", "cpm_csr";
+
+                       pcie_intc_1: interrupt-controller {
+                               #address-cells = <0>;
+                               #interrupt-cells = <1>;
+                               interrupt-controller;
+                       };
+               };
+
     };
diff --git a/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml b/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml
new file mode 100644
index 000000000000..69b7decabd45
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xlnx,axi-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI PCIe Root Port Bridge
+
+maintainers:
+  - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: xlnx,axi-pcie-host-1.00.a
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ranges:
+    items:
+      - description: |
+          ranges for the PCI memory regions (I/O space region is not
+          supported by hardware)
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller:
+    description: identifies the node as an interrupt controller
+    type: object
+    properties:
+      interrupt-controller: true
+
+      "#address-cells":
+        const: 0
+
+      "#interrupt-cells":
+        const: 1
+
+    required:
+      - interrupt-controller
+      - "#address-cells"
+      - "#interrupt-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - interrupts
+  - interrupt-map
+  - "#interrupt-cells"
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pcie@50000000 {
+        compatible = "xlnx,axi-pcie-host-1.00.a";
+        reg = <0x50000000 0x1000000>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <1>;
+        device_type = "pci";
+        interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0 0 0 1 &pcie_intc 1>,
+                        <0 0 0 2 &pcie_intc 2>,
+                        <0 0 0 3 &pcie_intc 3>,
+                        <0 0 0 4 &pcie_intc 4>;
+        ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>;
+        pcie_intc: interrupt-controller {
+            interrupt-controller;
+            #address-cells = <0>;
+            #interrupt-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
new file mode 100644
index 000000000000..897602559b37
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xlnx,nwl-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx NWL PCIe Root Port Bridge
+
+maintainers:
+  - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    const: xlnx,nwl-pcie-2.11
+
+  reg:
+    items:
+      - description: PCIe bridge registers location.
+      - description: PCIe Controller registers location.
+      - description: PCIe Configuration space region.
+
+  reg-names:
+    items:
+      - const: breg
+      - const: pcireg
+      - const: cfg
+
+  interrupts:
+    items:
+      - description: interrupt asserted when miscellaneous interrupt is received
+      - description: unused interrupt(dummy)
+      - description: interrupt asserted when a legacy interrupt is received
+      - description: msi1 interrupt asserted when an MSI is received
+      - description: msi0 interrupt asserted when an MSI is received
+
+  interrupt-names:
+    items:
+      - const: misc
+      - const: dummy
+      - const: intx
+      - const: msi1
+      - const: msi0
+
+  interrupt-map-mask:
+    items:
+      - const: 0
+      - const: 0
+      - const: 0
+      - const: 7
+
+  "#interrupt-cells":
+    const: 1
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+
+  interrupt-map:
+    maxItems: 4
+
+  power-domains:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  dma-coherent:
+    description: optional, only needed if DMA operations are coherent.
+
+  clocks:
+    maxItems: 1
+    description: optional, input clock specifier.
+
+  legacy-interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    properties:
+      "#address-cells":
+        const: 0
+
+      "#interrupt-cells":
+        const: 1
+
+      "interrupt-controller": true
+
+    required:
+      - "#address-cells"
+      - "#interrupt-cells"
+      - interrupt-controller
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-map
+  - interrupt-map-mask
+  - msi-controller
+  - power-domains
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/xlnx-zynqmp-power.h>
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        nwl_pcie: pcie@fd0e0000 {
+            compatible = "xlnx,nwl-pcie-2.11";
+            reg = <0x0 0xfd0e0000 0x0 0x1000>,
+                  <0x0 0xfd480000 0x0 0x1000>,
+                  <0x80 0x00000000 0x0 0x1000000>;
+            reg-names = "breg", "pcireg", "cfg";
+            ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+                     <0x43000000 0x00000006 0x0 0x00000006 0x0 0x00000002 0x0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            msi-controller;
+            device_type = "pci";
+            interrupt-parent = <&gic>;
+            interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 116 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 115 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "misc", "dummy", "intx", "msi1", "msi0";
+            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+            interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+                            <0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+                            <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+                            <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+            msi-parent = <&nwl_pcie>;
+            power-domains = <&zynqmp_firmware PD_PCIE>;
+            iommus = <&smmu 0x4d0>;
+            pcie_intc: legacy-interrupt-controller {
+                interrupt-controller;
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.yaml b/Documentation/devicetree/bindings/peci/peci-aspeed.yaml
new file mode 100644
index 000000000000..b01e0c8b963d
--- /dev/null
+++ b/Documentation/devicetree/bindings/peci/peci-aspeed.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/peci/peci-aspeed.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed PECI Bus
+
+maintainers:
+  - Iwona Winiarska <iwona.winiarska@intel.com>
+  - Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
+
+allOf:
+  - $ref: peci-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-peci
+      - aspeed,ast2500-peci
+      - aspeed,ast2600-peci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Clock source for PECI controller. Should reference the external
+      oscillator clock.
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  cmd-timeout-ms:
+    minimum: 1
+    maximum: 1000
+    default: 1000
+
+  clock-frequency:
+    description:
+      The desired operation frequency of PECI controller in Hz.
+    minimum: 2000
+    maximum: 2000000
+    default: 1000000
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/ast2600-clock.h>
+    peci-controller@1e78b000 {
+      compatible = "aspeed,ast2600-peci";
+      reg = <0x1e78b000 0x100>;
+      interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+      resets = <&syscon ASPEED_RESET_PECI>;
+      cmd-timeout-ms = <1000>;
+      clock-frequency = <1000000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/peci/peci-controller.yaml b/Documentation/devicetree/bindings/peci/peci-controller.yaml
new file mode 100644
index 000000000000..d7853291b060
--- /dev/null
+++ b/Documentation/devicetree/bindings/peci/peci-controller.yaml
@@ -0,0 +1,33 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/peci/peci-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic for PECI
+
+maintainers:
+  - Iwona Winiarska <iwona.winiarska@intel.com>
+
+description:
+  PECI (Platform Environment Control Interface) is an interface that provides a
+  communication channel from Intel processors and chipset components to external
+  monitoring or control devices.
+
+properties:
+  $nodename:
+    pattern: "^peci-controller(@.*)?$"
+
+  cmd-timeout-ms:
+    description:
+      Command timeout in units of ms.
+
+additionalProperties: true
+
+examples:
+  - |
+    peci-controller@1e78b000 {
+      reg = <0x1e78b000 0x100>;
+      cmd-timeout-ms = <500>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
new file mode 100644
index 000000000000..50f46a6898b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/amlogic,g12-ddr-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic G12 DDR performance monitor
+
+maintainers:
+  - Jiucheng Xu <jiucheng.xu@amlogic.com>
+
+description: |
+  Amlogic G12 series SoC integrate DDR bandwidth monitor.
+  A timer is inside and can generate interrupt when timeout.
+  The bandwidth is counted in the timer ISR. Different platform
+  has different subset of event format attribute.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,g12a-ddr-pmu
+      - amlogic,g12b-ddr-pmu
+      - amlogic,sm1-ddr-pmu
+
+  reg:
+    items:
+      - description: DMC bandwidth register space.
+      - description: DMC PLL register space.
+
+  interrupts:
+    items:
+      - description: The IRQ of the inside timer timeout.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pmu {
+        #address-cells=<2>;
+        #size-cells=<2>;
+
+        pmu@ff638000 {
+            compatible = "amlogic,g12a-ddr-pmu";
+            reg = <0x0 0xff638000 0x0 0x100>,
+                  <0x0 0xff638c00 0x0 0x100>;
+            interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/perf/arm,ccn.yaml b/Documentation/devicetree/bindings/perf/arm,ccn.yaml
new file mode 100644
index 000000000000..0b0bb2091016
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm,ccn.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,ccn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM CCN (Cache Coherent Network) Performance Monitors
+
+maintainers:
+  - Robin Murphy <robin.murphy@arm.com>
+
+properties:
+  compatible:
+    enum:
+      - arm,ccn-502
+      - arm,ccn-504
+      - arm,ccn-508
+      - arm,ccn-512
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    ccn@20000000 {
+        compatible = "arm,ccn-504";
+        reg = <0x20000000 0x1000000>;
+        interrupts = <0 181 4>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/perf/arm,cmn.yaml b/Documentation/devicetree/bindings/perf/arm,cmn.yaml
index 42424ccbdd0c..2e51072e794a 100644
--- a/Documentation/devicetree/bindings/perf/arm,cmn.yaml
+++ b/Documentation/devicetree/bindings/perf/arm,cmn.yaml
@@ -12,12 +12,16 @@ maintainers:
 
 properties:
   compatible:
-    const: arm,cmn-600
+    enum:
+      - arm,cmn-600
+      - arm,cmn-650
+      - arm,cmn-700
+      - arm,ci-700
 
   reg:
     items:
       - description: Physical address of the base (PERIPHBASE) and
-          size (up to 64MB) of the configuration address space.
+          size of the configuration address space.
 
   interrupts:
     minItems: 1
@@ -31,14 +35,23 @@ properties:
 
   arm,root-node:
     $ref: /schemas/types.yaml#/definitions/uint32
-    description: Offset from PERIPHBASE of the configuration
-      discovery node (see TRM definition of ROOTNODEBASE).
+    description: Offset from PERIPHBASE of CMN-600's configuration
+      discovery node (see TRM definition of ROOTNODEBASE). Not
+      relevant for newer CMN/CI products.
 
 required:
   - compatible
   - reg
   - interrupts
-  - arm,root-node
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: arm,cmn-600
+then:
+  required:
+    - arm,root-node
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml
new file mode 100644
index 000000000000..a740378ed592
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2021 Arm Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/arm,dsu-pmu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU)
+
+maintainers:
+  - Suzuki K Poulose <suzuki.poulose@arm.com>
+  - Robin Murphy <robin.murphy@arm.com>
+
+description:
+  ARM DynamIQ Shared Unit (DSU) integrates one or more CPU cores with a shared
+  L3 memory system, control logic and external interfaces to form a multicore
+  cluster. The PMU enables gathering various statistics on the operation of the
+  DSU. The PMU provides independent 32-bit counters that can count any of the
+  supported events, along with a 64-bit cycle counter. The PMU is accessed via
+  CPU system registers and has no MMIO component.
+
+properties:
+  compatible:
+    oneOf:
+      - const: arm,dsu-pmu
+      - items:
+          - const: arm,dsu-110-pmu
+          - const: arm,dsu-pmu
+
+  interrupts:
+    items:
+      - description: nCLUSTERPMUIRQ interrupt
+
+  cpus:
+    minItems: 1
+    maxItems: 12
+    description: List of phandles for the CPUs connected to this DSU instance.
+
+required:
+  - compatible
+  - interrupts
+  - cpus
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/perf/arm,smmu-v3-pmcg.yaml b/Documentation/devicetree/bindings/perf/arm,smmu-v3-pmcg.yaml
new file mode 100644
index 000000000000..a4b53a6a1ebf
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/arm,smmu-v3-pmcg.yaml