Merge Linus master into drm-next

The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.

I've included the patch into the merge to fix the build.

Signed-off-by: Dave Airlie <airlied@redhat.com>

7 files changed, 15 insertions, 28 deletions

diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c
index 6250aee30503..89a4ff100b7a 100644
--- a/drivers/ide/cs5520.c
+++ b/drivers/ide/cs5520.c
@@ -123,7 +123,7 @@ static int cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		return -ENODEV;
 	}
 	pci_set_master(dev);
-	if (pci_set_dma_mask(dev, DMA_BIT_MASK(32))) {
+	if (dma_set_mask(&dev->dev, DMA_BIT_MASK(32))) {
 		printk(KERN_WARNING "%s: No suitable DMA available.\n",
 			d->name);
 		return -ENODEV;
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index d9c9829c8b20..e1180fa46196 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -148,8 +148,8 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)
 			printk(KERN_CONT "DataRequest ");
 		if (stat & ATA_CORR)
 			printk(KERN_CONT "CorrectedError ");
-		if (stat & ATA_IDX)
-			printk(KERN_CONT "Index ");
+		if (stat & ATA_SENSE)
+			printk(KERN_CONT "Sense ");
 		if (stat & ATA_ERR)
 			printk(KERN_CONT "Error ");
 	}
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index e5f3db831373..f5f2b62471da 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -96,17 +96,5 @@ static struct pnp_driver idepnp_driver = {
 	.remove		= idepnp_remove,
 };
 
-static int __init pnpide_init(void)
-{
-	return pnp_register_driver(&idepnp_driver);
-}
-
-static void __exit pnpide_exit(void)
-{
-	pnp_unregister_driver(&idepnp_driver);
-}
-
-module_init(pnpide_init);
-module_exit(pnpide_exit);
-
+module_pnp_driver(idepnp_driver);
 MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index a3d3b1733c49..0b63facd1d87 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -273,7 +273,7 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id, int irq_ctx)
 	    (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) {
 		a = tp_ops->read_altstatus(hwif);
 		s = tp_ops->read_status(hwif);
-		if ((a ^ s) & ~ATA_IDX)
+		if ((a ^ s) & ~ATA_SENSE)
 			/* ancient Seagate drives, broken interfaces */
 			printk(KERN_INFO "%s: probing with STATUS(0x%02x) "
 					 "instead of ALTSTATUS(0x%02x)\n",
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c
index 2db803cd095c..96a345248224 100644
--- a/drivers/ide/pmac.c
+++ b/drivers/ide/pmac.c
@@ -1497,9 +1497,9 @@ static int pmac_ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 				       drive->name);
 				return 0;
 			}
-			st_le16(&table->command, wr? OUTPUT_MORE: INPUT_MORE);
-			st_le16(&table->req_count, tc);
-			st_le32(&table->phy_addr, cur_addr);
+			table->command = cpu_to_le16(wr? OUTPUT_MORE: INPUT_MORE);
+			table->req_count = cpu_to_le16(tc);
+			table->phy_addr = cpu_to_le32(cur_addr);
 			table->cmd_dep = 0;
 			table->xfer_status = 0;
 			table->res_count = 0;
@@ -1513,10 +1513,10 @@ static int pmac_ide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
 
 	/* convert the last command to an input/output last command */
 	if (count) {
-		st_le16(&table[-1].command, wr? OUTPUT_LAST: INPUT_LAST);
+		table[-1].command = cpu_to_le16(wr? OUTPUT_LAST: INPUT_LAST);
 		/* add the stop command to the end of the list */
 		memset(table, 0, sizeof(struct dbdma_cmd));
-		st_le16(&table->command, DBDMA_STOP);
+		table->command = cpu_to_le16(DBDMA_STOP);
 		mb();
 		writel(hwif->dmatable_dma, &dma->cmdptr);
 		return 1;
@@ -1689,10 +1689,9 @@ static int pmac_ide_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
 	 * The +2 is +1 for the stop command and +1 to allow for
 	 * aligning the start address to a multiple of 16 bytes.
 	 */
-	pmif->dma_table_cpu = pci_alloc_consistent(
-		dev,
+	pmif->dma_table_cpu = dma_alloc_coherent(&dev->dev,
 		(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
-		&hwif->dmatable_dma);
+		&hwif->dmatable_dma, GFP_KERNEL);
 	if (pmif->dma_table_cpu == NULL) {
 		printk(KERN_ERR "%s: unable to allocate DMA command list\n",
 		       hwif->name);
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 34a5e5223d50..112d2fe1bcdb 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -209,7 +209,7 @@ static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
 	 * a DMA mask field to the struct ide_port_info if we need it
 	 * (or let lower level driver set the DMA mask)
 	 */
-	ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
+	ret = dma_set_mask(&dev->dev, DMA_BIT_MASK(32));
 	if (ret < 0) {
 		printk(KERN_ERR "%s %s: can't set DMA mask\n",
 			d->name, pci_name(dev));
diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c
index 63761db61384..2d35e9f7516f 100644
--- a/drivers/ide/sgiioc4.c
+++ b/drivers/ide/sgiioc4.c
@@ -334,8 +334,8 @@ static int ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
 	if (ide_allocate_dma_engine(hwif))
 		goto dma_pci_alloc_failure;
 
-	pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
-				   (dma_addr_t *)&hwif->extra_base);
+	pad = dma_alloc_coherent(&dev->dev, IOC4_IDE_CACHELINE_SIZE,
+				   (dma_addr_t *)&hwif->extra_base, GFP_KERNEL);
 	if (pad) {
 		ide_set_hwifdata(hwif, pad);
 		return 0;