Merge branch 'intel'

Jeff Kirsher says:

====================
This series contains updates to e1000e and igb.  Most notably is the
added timestamp support in e1000e and additional software timestamp
support in igb.  As well as, the added thermal data support and SR-IOV
configuration support in igb.

v2- dropped the following patches from the previous 14 patch series
because changes were requested from the community:
  e1000e: add support for IEEE-1588 PTP
  igb: Report L4 Rx hash via skb->l4_rxhash
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

11 files changed, 1096 insertions, 108 deletions

diff --git a/drivers/net/ethernet/intel/igb/Makefile b/drivers/net/ethernet/intel/igb/Makefile
index 624476cfa727..f9d37c809885 100644
--- a/drivers/net/ethernet/intel/igb/Makefile
+++ b/drivers/net/ethernet/intel/igb/Makefile
@@ -34,4 +34,4 @@ obj-$(CONFIG_IGB) += igb.o
 
 igb-objs := igb_main.o igb_ethtool.o e1000_82575.o \
 	    e1000_mac.o e1000_nvm.o e1000_phy.o e1000_mbx.o \
-	    e1000_i210.o igb_ptp.o
+	    e1000_i210.o igb_ptp.o igb_hwmon.o
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index fdaaf2709d0a..b6ec782156bb 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -33,6 +33,7 @@
 
 #include <linux/types.h>
 #include <linux/if_ether.h>
+#include <linux/i2c.h>
 
 #include "e1000_mac.h"
 #include "e1000_82575.h"
@@ -2302,18 +2303,157 @@ out:
 	return ret_val;
 }
 
+static const u8 e1000_emc_temp_data[4] = {
+	E1000_EMC_INTERNAL_DATA,
+	E1000_EMC_DIODE1_DATA,
+	E1000_EMC_DIODE2_DATA,
+	E1000_EMC_DIODE3_DATA
+};
+static const u8 e1000_emc_therm_limit[4] = {
+	E1000_EMC_INTERNAL_THERM_LIMIT,
+	E1000_EMC_DIODE1_THERM_LIMIT,
+	E1000_EMC_DIODE2_THERM_LIMIT,
+	E1000_EMC_DIODE3_THERM_LIMIT
+};
+
+/* igb_get_thermal_sensor_data_generic - Gathers thermal sensor data
+ *  @hw: pointer to hardware structure
+ *
+ *  Updates the temperatures in mac.thermal_sensor_data
+ */
+s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw)
+{
+	s32 status = E1000_SUCCESS;
+	u16 ets_offset;
+	u16 ets_cfg;
+	u16 ets_sensor;
+	u8  num_sensors;
+	u8  sensor_index;
+	u8  sensor_location;
+	u8  i;
+	struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+	if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
+		return E1000_NOT_IMPLEMENTED;
+
+	data->sensor[0].temp = (rd32(E1000_THMJT) & 0xFF);
+
+	/* Return the internal sensor only if ETS is unsupported */
+	hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset);
+	if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+		return status;
+
+	hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg);
+	if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
+	    != NVM_ETS_TYPE_EMC)
+		return E1000_NOT_IMPLEMENTED;
+
+	num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
+	if (num_sensors > E1000_MAX_SENSORS)
+		num_sensors = E1000_MAX_SENSORS;
+
+	for (i = 1; i < num_sensors; i++) {
+		hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor);
+		sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
+				NVM_ETS_DATA_INDEX_SHIFT);
+		sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
+				   NVM_ETS_DATA_LOC_SHIFT);
+
+		if (sensor_location != 0)
+			hw->phy.ops.read_i2c_byte(hw,
+					e1000_emc_temp_data[sensor_index],
+					E1000_I2C_THERMAL_SENSOR_ADDR,
+					&data->sensor[i].temp);
+	}
+	return status;
+}
+
+/* igb_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the thermal sensor thresholds according to the NVM map
+ *  and save off the threshold and location values into mac.thermal_sensor_data
+ */
+s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *hw)
+{
+	s32 status = E1000_SUCCESS;
+	u16 ets_offset;
+	u16 ets_cfg;
+	u16 ets_sensor;
+	u8  low_thresh_delta;
+	u8  num_sensors;
+	u8  sensor_index;
+	u8  sensor_location;
+	u8  therm_limit;
+	u8  i;
+	struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+	if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
+		return E1000_NOT_IMPLEMENTED;
+
+	memset(data, 0, sizeof(struct e1000_thermal_sensor_data));
+
+	data->sensor[0].location = 0x1;
+	data->sensor[0].caution_thresh =
+		(rd32(E1000_THHIGHTC) & 0xFF);
+	data->sensor[0].max_op_thresh =
+		(rd32(E1000_THLOWTC) & 0xFF);
+
+	/* Return the internal sensor only if ETS is unsupported */
+	hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset);
+	if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+		return status;
+
+	hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg);
+	if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
+	    != NVM_ETS_TYPE_EMC)
+		return E1000_NOT_IMPLEMENTED;
+
+	low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >>
+			    NVM_ETS_LTHRES_DELTA_SHIFT);
+	num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
+
+	for (i = 1; i <= num_sensors; i++) {
+		hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor);
+		sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
+				NVM_ETS_DATA_INDEX_SHIFT);
+		sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
+				   NVM_ETS_DATA_LOC_SHIFT);
+		therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK;
+
+		hw->phy.ops.write_i2c_byte(hw,
+			e1000_emc_therm_limit[sensor_index],
+			E1000_I2C_THERMAL_SENSOR_ADDR,
+			therm_limit);
+
+		if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) {
+			data->sensor[i].location = sensor_location;
+			data->sensor[i].caution_thresh = therm_limit;
+			data->sensor[i].max_op_thresh = therm_limit -
+							low_thresh_delta;
+		}
+	}
+	return status;
+}
+
 static struct e1000_mac_operations e1000_mac_ops_82575 = {
 	.init_hw              = igb_init_hw_82575,
 	.check_for_link       = igb_check_for_link_82575,
 	.rar_set              = igb_rar_set,
 	.read_mac_addr        = igb_read_mac_addr_82575,
 	.get_speed_and_duplex = igb_get_speed_and_duplex_copper,
+#ifdef CONFIG_IGB_HWMON
+	.get_thermal_sensor_data = igb_get_thermal_sensor_data_generic,
+	.init_thermal_sensor_thresh = igb_init_thermal_sensor_thresh_generic,
+#endif
 };
 
 static struct e1000_phy_operations e1000_phy_ops_82575 = {
 	.acquire              = igb_acquire_phy_82575,
 	.get_cfg_done         = igb_get_cfg_done_82575,
 	.release              = igb_release_phy_82575,
+	.write_i2c_byte       = igb_write_i2c_byte,
+	.read_i2c_byte        = igb_read_i2c_byte,
 };
 
 static struct e1000_nvm_operations e1000_nvm_ops_82575 = {
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.h b/drivers/net/ethernet/intel/igb/e1000_82575.h
index 44b76b3b6816..444f6f521da7 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.h
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.h
@@ -32,6 +32,10 @@ extern void igb_shutdown_serdes_link_82575(struct e1000_hw *hw);
 extern void igb_power_up_serdes_link_82575(struct e1000_hw *hw);
 extern void igb_power_down_phy_copper_82575(struct e1000_hw *hw);
 extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
+extern s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+				u8 dev_addr, u8 *data);
+extern s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+				 u8 dev_addr, u8 data);
 
 #define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \
                                      (ID_LED_DEF1_DEF2 <<  8) | \
@@ -260,5 +264,16 @@ void igb_vmdq_set_loopback_pf(struct e1000_hw *, bool);
 void igb_vmdq_set_replication_pf(struct e1000_hw *, bool);
 u16 igb_rxpbs_adjust_82580(u32 data);
 s32 igb_set_eee_i350(struct e1000_hw *);
-
+s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *);
+s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw);
+
+#define E1000_I2C_THERMAL_SENSOR_ADDR	0xF8
+#define E1000_EMC_INTERNAL_DATA		0x00
+#define E1000_EMC_INTERNAL_THERM_LIMIT	0x20
+#define E1000_EMC_DIODE1_DATA		0x01
+#define E1000_EMC_DIODE1_THERM_LIMIT	0x19
+#define E1000_EMC_DIODE2_DATA		0x23
+#define E1000_EMC_DIODE2_THERM_LIMIT	0x1A
+#define E1000_EMC_DIODE3_DATA		0x2A
+#define E1000_EMC_DIODE3_THERM_LIMIT	0x30
 #endif
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 45dce06eff26..9b7ef93efd79 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -470,6 +470,7 @@
 #define E1000_ERR_NO_SPACE          17
 #define E1000_ERR_NVM_PBA_SECTION   18
 #define E1000_ERR_INVM_VALUE_NOT_FOUND	19
+#define E1000_ERR_I2C               20
 
 /* Loop limit on how long we wait for auto-negotiation to complete */
 #define COPPER_LINK_UP_LIMIT              10
@@ -674,6 +675,18 @@
 #define NVM_COMB_VER_SHFT               8
 #define NVM_VER_INVALID            0xFFFF
 #define NVM_ETRACK_SHIFT               16
+#define NVM_ETS_CFG			0x003E
+#define NVM_ETS_LTHRES_DELTA_MASK	0x07C0
+#define NVM_ETS_LTHRES_DELTA_SHIFT	6
+#define NVM_ETS_TYPE_MASK		0x0038
+#define NVM_ETS_TYPE_SHIFT		3
+#define NVM_ETS_TYPE_EMC		0x000
+#define NVM_ETS_NUM_SENSORS_MASK	0x0007
+#define NVM_ETS_DATA_LOC_MASK		0x3C00
+#define NVM_ETS_DATA_LOC_SHIFT		10
+#define NVM_ETS_DATA_INDEX_MASK		0x0300
+#define NVM_ETS_DATA_INDEX_SHIFT	8
+#define NVM_ETS_DATA_HTHRESH_MASK	0x00FF
 
 #define E1000_NVM_CFG_DONE_PORT_0  0x040000 /* MNG config cycle done */
 #define E1000_NVM_CFG_DONE_PORT_1  0x080000 /* ...for second port */
diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h
index c2a51dcda550..2c9b6f40e21c 100644
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -325,6 +325,10 @@ struct e1000_mac_operations {
 	s32  (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *);
 	s32  (*acquire_swfw_sync)(struct e1000_hw *, u16);
 	void (*release_swfw_sync)(struct e1000_hw *, u16);
+#ifdef CONFIG_IGB_HWMON
+	s32 (*get_thermal_sensor_data)(struct e1000_hw *);
+	s32 (*init_thermal_sensor_thresh)(struct e1000_hw *);
+#endif
 
 };
 
@@ -342,6 +346,8 @@ struct e1000_phy_operations {
 	s32  (*set_d0_lplu_state)(struct e1000_hw *, bool);
 	s32  (*set_d3_lplu_state)(struct e1000_hw *, bool);
 	s32  (*write_reg)(struct e1000_hw *, u32, u16);
+	s32 (*read_i2c_byte)(struct e1000_hw *, u8, u8, u8 *);
+	s32 (*write_i2c_byte)(struct e1000_hw *, u8, u8, u8);
 };
 
 struct e1000_nvm_operations {
@@ -354,6 +360,19 @@ struct e1000_nvm_operations {
 	s32  (*valid_led_default)(struct e1000_hw *, u16 *);
 };
 
+#define E1000_MAX_SENSORS		3
+
+struct e1000_thermal_diode_data {
+	u8 location;
+	u8 temp;
+	u8 caution_thresh;
+	u8 max_op_thresh;
+};
+
+struct e1000_thermal_sensor_data {
+	struct e1000_thermal_diode_data sensor[E1000_MAX_SENSORS];
+};
+
 struct e1000_info {
 	s32 (*get_invariants)(struct e1000_hw *);
 	struct e1000_mac_operations *mac_ops;
@@ -399,6 +418,7 @@ struct e1000_mac_info {
 	bool report_tx_early;
 	bool serdes_has_link;
 	bool tx_pkt_filtering;
+	struct e1000_thermal_sensor_data thermal_sensor_data;
 };
 
 struct e1000_phy_info {
diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
index e5db48594e8a..889de261844d 100644
--- a/drivers/net/ethernet/intel/igb/e1000_regs.h
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -75,6 +75,14 @@
 #define E1000_FCRTL    0x02160  /* Flow Control Receive Threshold Low - RW */
 #define E1000_FCRTH    0x02168  /* Flow Control Receive Threshold High - RW */
 #define E1000_FCRTV    0x02460  /* Flow Control Refresh Timer Value - RW */
+#define E1000_I2CPARAMS        0x0102C /* SFPI2C Parameters Register - RW */
+#define E1000_I2CBB_EN      0x00000100  /* I2C - Bit Bang Enable */
+#define E1000_I2C_CLK_OUT   0x00000200  /* I2C- Clock */
+#define E1000_I2C_DATA_OUT  0x00000400  /* I2C- Data Out */
+#define E1000_I2C_DATA_OE_N 0x00000800  /* I2C- Data Output Enable */
+#define E1000_I2C_DATA_IN   0x00001000  /* I2C- Data In */
+#define E1000_I2C_CLK_OE_N  0x00002000  /* I2C- Clock Output Enable */
+#define E1000_I2C_CLK_IN    0x00004000  /* I2C- Clock In */
 
 /* IEEE 1588 TIMESYNCH */
 #define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */
@@ -124,6 +132,14 @@
 
 /* Split and Replication RX Control - RW */
 #define E1000_RXPBS    0x02404  /* Rx Packet Buffer Size - RW */
+
+/* Thermal sensor configuration and status registers */
+#define E1000_THMJT	0x08100 /* Junction Temperature */
+#define E1000_THLOWTC	0x08104 /* Low Threshold Control */
+#define E1000_THMIDTC	0x08108 /* Mid Threshold Control */
+#define E1000_THHIGHTC	0x0810C /* High Threshold Control */
+#define E1000_THSTAT	0x08110 /* Thermal Sensor Status */
+
 /*
  * Convenience macros
  *
diff --git a/drivers/net/ethernet/intel/igb/igb.h b/drivers/net/ethernet/intel/igb/igb.h
index 17f1686ee411..ad317ab3a34c 100644
--- a/drivers/net/ethernet/intel/igb/igb.h
+++ b/drivers/net/ethernet/intel/igb/igb.h
@@ -39,6 +39,8 @@
 #include <linux/ptp_clock_kernel.h>
 #include <linux/bitops.h>
 #include <linux/if_vlan.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
 
 struct igb_adapter;
 
@@ -219,6 +221,7 @@ struct igb_ring {
 		struct igb_tx_buffer *tx_buffer_info;
 		struct igb_rx_buffer *rx_buffer_info;
 	};
+	unsigned long last_rx_timestamp;
 	void *desc;			/* descriptor ring memory */
 	unsigned long flags;		/* ring specific flags */
 	void __iomem *tail;		/* pointer to ring tail register */
@@ -301,6 +304,32 @@ static inline int igb_desc_unused(struct igb_ring *ring)
 	return ring->count + ring->next_to_clean - ring->next_to_use - 1;
 }
 
+struct igb_i2c_client_list {
+	struct i2c_client *client;
+	struct igb_i2c_client_list *next;
+};
+
+#ifdef CONFIG_IGB_HWMON
+
+#define IGB_HWMON_TYPE_LOC	0
+#define IGB_HWMON_TYPE_TEMP	1
+#define IGB_HWMON_TYPE_CAUTION	2
+#define IGB_HWMON_TYPE_MAX	3
+
+struct hwmon_attr {
+	struct device_attribute dev_attr;
+	struct e1000_hw *hw;
+	struct e1000_thermal_diode_data *sensor;
+	char name[12];
+	};
+
+struct hwmon_buff {
+	struct device *device;
+	struct hwmon_attr *hwmon_list;
+	unsigned int n_hwmon;
+	};
+#endif
+
 /* board specific private data structure */
 struct igb_adapter {
 	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
@@ -386,11 +415,22 @@ struct igb_adapter {
 	struct delayed_work ptp_overflow_work;
 	struct work_struct ptp_tx_work;
 	struct sk_buff *ptp_tx_skb;
+	unsigned long ptp_tx_start;
+	unsigned long last_rx_ptp_check;
 	spinlock_t tmreg_lock;
 	struct cyclecounter cc;
 	struct timecounter tc;
+	u32 tx_hwtstamp_timeouts;
+	u32 rx_hwtstamp_cleared;
 
 	char fw_version[32];
+#ifdef CONFIG_IGB_HWMON
+	struct hwmon_buff igb_hwmon_buff;
+	bool ets;
+#endif
+	struct i2c_algo_bit_data i2c_algo;
+	struct i2c_adapter i2c_adap;
+	struct igb_i2c_client_list *i2c_clients;
 };
 
 #define IGB_FLAG_HAS_MSI		(1 << 0)
@@ -449,6 +489,7 @@ extern void igb_ptp_init(struct igb_adapter *adapter);
 extern void igb_ptp_stop(struct igb_adapter *adapter);
 extern void igb_ptp_reset(struct igb_adapter *adapter);
 extern void igb_ptp_tx_work(struct work_struct *work);
+extern void igb_ptp_rx_hang(struct igb_adapter *adapter);
 extern void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter);
 extern void igb_ptp_rx_rgtstamp(struct igb_q_vector *q_vector,
 				struct sk_buff *skb);
@@ -466,7 +507,10 @@ static inline void igb_ptp_rx_hwtstamp(struct igb_q_vector *q_vector,
 
 extern int igb_ptp_hwtstamp_ioctl(struct net_device *netdev,
 				  struct ifreq *ifr, int cmd);
-
+#ifdef CONFIG_IGB_HWMON
+extern void igb_sysfs_exit(struct igb_adapter *adapter);
+extern int igb_sysfs_init(struct igb_adapter *adapter);
+#endif
 static inline s32 igb_reset_phy(struct e1000_hw *hw)
 {
 	if (hw->phy.ops.reset)
diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index bfe9208c4b18..3ff37946f899 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -92,6 +92,8 @@ static const struct igb_stats igb_gstrings_stats[] = {
 	IGB_STAT("os2bmc_tx_by_bmc", stats.b2ospc),
 	IGB_STAT("os2bmc_tx_by_host", stats.o2bspc),
 	IGB_STAT("os2bmc_rx_by_host", stats.b2ogprc),
+	IGB_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts),
+	IGB_STAT("rx_hwtstamp_cleared", rx_hwtstamp_cleared),
 };
 
 #define IGB_NETDEV_STAT(_net_stat) { \
@@ -2272,12 +2274,21 @@ static int igb_get_ts_info(struct net_device *dev,
 	struct igb_adapter *adapter = netdev_priv(dev);
 
 	switch (adapter->hw.mac.type) {
+	case e1000_82575:
+		info->so_timestamping =
+			SOF_TIMESTAMPING_TX_SOFTWARE |
+			SOF_TIMESTAMPING_RX_SOFTWARE |
+			SOF_TIMESTAMPING_SOFTWARE;
+		return 0;
 	case e1000_82576:
 	case e1000_82580:
 	case e1000_i350:
 	case e1000_i210:
 	case e1000_i211:
 		info->so_timestamping =
+			SOF_TIMESTAMPING_TX_SOFTWARE |
+			SOF_TIMESTAMPING_RX_SOFTWARE |
+			SOF_TIMESTAMPING_SOFTWARE |
 			SOF_TIMESTAMPING_TX_HARDWARE |
 			SOF_TIMESTAMPING_RX_HARDWARE |
 			SOF_TIMESTAMPING_RAW_HARDWARE;
diff --git a/drivers/net/ethernet/intel/igb/igb_hwmon.c b/drivers/net/ethernet/intel/igb/igb_hwmon.c
new file mode 100644
index 000000000000..106bd7c29bc9
--- /dev/null
+++ b/drivers/net/ethernet/intel/igb/igb_hwmon.c
@@ -0,0 +1,242 @@
+/*******************************************************************************
+
+  Intel(R) Gigabit Ethernet Linux driver
+  Copyright(c) 2007-2012 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "igb.h"
+#include "e1000_82575.h"
+#include "e1000_hw.h"
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/hwmon.h>
+#include <linux/pci.h>
+
+#ifdef CONFIG_IGB_HWMON
+/* hwmon callback functions */
+static ssize_t igb_hwmon_show_location(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+						     dev_attr);
+	return sprintf(buf, "loc%u\n",
+		       igb_attr->sensor->location);
+}
+
+static ssize_t igb_hwmon_show_temp(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+						     dev_attr);
+	unsigned int value;
+
+	/* reset the temp field */
+	igb_attr->hw->mac.ops.get_thermal_sensor_data(igb_attr->hw);
+
+	value = igb_attr->sensor->temp;
+
+	/* display millidegree */
+	value *= 1000;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t igb_hwmon_show_cautionthresh(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+						     dev_attr);
+	unsigned int value = igb_attr->sensor->caution_thresh;
+
+	/* display millidegree */
+	value *= 1000;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t igb_hwmon_show_maxopthresh(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+						     dev_attr);
+	unsigned int value = igb_attr->sensor->max_op_thresh;
+
+	/* display millidegree */
+	value *= 1000;
+
+	return sprintf(buf, "%u\n", value);
+}
+
+/* igb_add_hwmon_attr - Create hwmon attr table for a hwmon sysfs file.
+ * @ adapter: pointer to the adapter structure
+ * @ offset: offset in the eeprom sensor data table
+ * @ type: type of sensor data to display
+ *
+ * For each file we want in hwmon's sysfs interface we need a device_attribute
+ * This is included in our hwmon_attr struct that contains the references to
+ * the data structures we need to get the data to display.
+ */
+static int igb_add_hwmon_attr(struct igb_adapter *adapter,
+				unsigned int offset, int type) {
+	int rc;
+	unsigned int n_attr;
+	struct hwmon_attr *igb_attr;
+
+	n_attr = adapter->igb_hwmon_buff.n_hwmon;
+	igb_attr = &adapter->igb_hwmon_buff.hwmon_list[n_attr];
+
+	switch (type) {
+	case IGB_HWMON_TYPE_LOC:
+		igb_attr->dev_attr.show = igb_hwmon_show_location;
+		snprintf(igb_attr->name, sizeof(igb_attr->name),
+			 "temp%u_label", offset);
+		break;
+	case IGB_HWMON_TYPE_TEMP:
+		igb_attr->dev_attr.show = igb_hwmon_show_temp;
+		snprintf(igb_attr->name, sizeof(igb_attr->name),
+			 "temp%u_input", offset);
+		break;
+	case IGB_HWMON_TYPE_CAUTION:
+		igb_attr->dev_attr.show = igb_hwmon_show_cautionthresh;
+		snprintf(igb_attr->name, sizeof(igb_attr->name),
+			 "temp%u_max", offset);
+		break;
+	case IGB_HWMON_TYPE_MAX:
+		igb_attr->dev_attr.show = igb_hwmon_show_maxopthresh;
+		snprintf(igb_attr->name, sizeof(igb_attr->name),
+			 "temp%u_crit", offset);
+		break;
+	default:
+		rc = -EPERM;
+		return rc;
+	}
+
+	/* These always the same regardless of type */
+	igb_attr->sensor =
+		&adapter->hw.mac.thermal_sensor_data.sensor[offset];
+	igb_attr->hw = &adapter->hw;
+	igb_attr->dev_attr.store = NULL;
+	igb_attr->dev_attr.attr.mode = S_IRUGO;
+	igb_attr->dev_attr.attr.name = igb_attr->name;
+	sysfs_attr_init(&igb_attr->dev_attr.attr);
+	rc = device_create_file(&adapter->pdev->dev,
+				&igb_attr->dev_attr);
+	if (rc == 0)
+		++adapter->igb_hwmon_buff.n_hwmon;
+
+	return rc;
+}
+
+static void igb_sysfs_del_adapter(struct igb_adapter *adapter)
+{
+	int i;
+
+	if (adapter == NULL)
+		return;
+
+	for (i = 0; i < adapter->igb_hwmon_buff.n_hwmon; i++) {
+		device_remove_file(&adapter->pdev->dev,
+			   &adapter->igb_hwmon_buff.hwmon_list[i].dev_attr);
+	}
+
+	kfree(adapter->igb_hwmon_buff.hwmon_list);
+
+	if (adapter->igb_hwmon_buff.device)
+		hwmon_device_unregister(adapter->igb_hwmon_buff.device);
+}
+
+/* called from igb_main.c */
+void igb_sysfs_exit(struct igb_adapter *adapter)
+{
+	igb_sysfs_del_adapter(adapter);
+}
+
+/* called from igb_main.c */
+int igb_sysfs_init(struct igb_adapter *adapter)
+{
+	struct hwmon_buff *igb_hwmon = &adapter->igb_hwmon_buff;
+	unsigned int i;
+	int n_attrs;
+	int rc = 0;
+
+	/* If this method isn't defined we don't support thermals */
+	if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL)
+		goto exit;
+
+	/* Don't create thermal hwmon interface if no sensors present */
+	rc = (adapter->hw.mac.ops.init_thermal_sensor_thresh(&adapter->hw));
+		if (rc)
+			goto exit;
+
+	/* Allocation space for max attributes
+	 * max num sensors * values (loc, temp, max, caution)
+	 */
+	n_attrs = E1000_MAX_SENSORS * 4;
+	igb_hwmon->hwmon_list = kcalloc(n_attrs, sizeof(struct hwmon_attr),
+					  GFP_KERNEL);
+	if (!igb_hwmon->hwmon_list) {
+		rc = -ENOMEM;
+		goto err;
+	}
+
+	igb_hwmon->device = hwmon_device_register(&adapter->pdev->dev);
+	if (IS_ERR(igb_hwmon->device)) {
+		rc = PTR_ERR(igb_hwmon->device);
+		goto err;
+	}
+
+	for (i = 0; i < E1000_MAX_SENSORS; i++) {
+
+		/* Only create hwmon sysfs entries for sensors that have
+		 * meaningful data.
+		 */
+		if (adapter->hw.mac.thermal_sensor_data.sensor[i].location == 0)
+			continue;
+
+		/* Bail if any hwmon attr struct fails to initialize */
+		rc = igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_CAUTION);
+		rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_LOC);
+		rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_TEMP);
+		rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_MAX);
+		if (rc)
+			goto err;
+	}
+
+	goto exit;
+
+err:
+	igb_sysfs_del_adapter(adapter);
+exit:
+	return rc;
+}
+#endif
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index a0a31b55a073..c9e438ba1ec2 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -57,6 +57,7 @@
 #ifdef CONFIG_IGB_DCA
 #include <linux/dca.h>
 #endif
+#include <linux/i2c.h>
 #include "igb.h"
 
 #define MAJ 4
@@ -193,6 +194,7 @@ static const struct dev_pm_ops igb_pm_ops = {
 };
 #endif
 static void igb_shutdown(struct pci_dev *);
+static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs);
 #ifdef CONFIG_IGB_DCA
 static int igb_notify_dca(struct notifier_block *, unsigned long, void *);
 static struct notifier_block dca_notifier = {
@@ -234,6 +236,7 @@ static struct pci_driver igb_driver = {
 	.driver.pm = &igb_pm_ops,
 #endif
 	.shutdown = igb_shutdown,
+	.sriov_configure = igb_pci_sriov_configure,
 	.err_handler = &igb_err_handler
 };
 
@@ -565,6 +568,91 @@ exit:
 	return;
 }
 
+/*  igb_get_i2c_data - Reads the I2C SDA data bit
+ *  @hw: pointer to hardware structure
+ *  @i2cctl: Current value of I2CCTL register
+ *
+ *  Returns the I2C data bit value
+ */
+static int igb_get_i2c_data(void *data)
+{
+	struct igb_adapter *adapter = (struct igb_adapter *)data;
+	struct e1000_hw *hw = &adapter->hw;
+	s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+	return ((i2cctl & E1000_I2C_DATA_IN) != 0);
+}
+
+/* igb_set_i2c_data - Sets the I2C data bit
+ *  @data: pointer to hardware structure
+ *  @state: I2C data value (0 or 1) to set
+ *
+ *  Sets the I2C data bit
+ */
+static void igb_set_i2c_data(void *data, int state)
+{
+	struct igb_adapter *adapter = (struct igb_adapter *)data;
+	struct e1000_hw *hw = &adapter->hw;
+	s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+	if (state)
+		i2cctl |= E1000_I2C_DATA_OUT;
+	else
+		i2cctl &= ~E1000_I2C_DATA_OUT;
+
+	i2cctl &= ~E1000_I2C_DATA_OE_N;
+	i2cctl |= E1000_I2C_CLK_OE_N;
+	wr32(E1000_I2CPARAMS, i2cctl);
+	wrfl();
+
+}
+
+/* igb_set_i2c_clk - Sets the I2C SCL clock
+ *  @data: pointer to hardware structure
+ *  @state: state to set clock
+ *
+ *  Sets the I2C clock line to state
+ */
+static void igb_set_i2c_clk(void *data, int state)
+{
+	struct igb_adapter *adapter = (struct igb_adapter *)data;
+	struct e1000_hw *hw = &adapter->hw;
+	s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+	if (state) {
+		i2cctl |= E1000_I2C_CLK_OUT;
+		i2cctl &= ~E1000_I2C_CLK_OE_N;
+	} else {
+		i2cctl &= ~E1000_I2C_CLK_OUT;
+		i2cctl &= ~E1000_I2C_CLK_OE_N;
+	}
+	wr32(E1000_I2CPARAMS, i2cctl);
+	wrfl();
+}
+
+/* igb_get_i2c_clk - Gets the I2C SCL clock state
+ *  @data: pointer to hardware structure
+ *
+ *  Gets the I2C clock state
+ */
+static int igb_get_i2c_clk(void *data)
+{
+	struct igb_adapter *adapter = (struct igb_adapter *)data;
+	struct e1000_hw *hw = &adapter->hw;
+	s32 i2cctl = rd32(E1000_I2CPARAMS);
+
+	return ((i2cctl & E1000_I2C_CLK_IN) != 0);
+}
+
+static const struct i2c_algo_bit_data igb_i2c_algo = {
+	.setsda		= igb_set_i2c_data,
+	.setscl		= igb_set_i2c_clk,
+	.getsda		= igb_get_i2c_data,
+	.getscl		= igb_get_i2c_clk,
+	.udelay		= 5,
+	.timeout	= 20,
+};
+
 /**
  * igb_get_hw_dev - return device
  * used by hardware layer to print debugging information
@@ -1708,6 +1796,18 @@ void igb_reset(struct igb_adapter *adapter)
 		igb_force_mac_fc(hw);
 
 	igb_init_dmac(adapter, pba);
+#ifdef CONFIG_IGB_HWMON
+	/* Re-initialize the thermal sensor on i350 devices. */
+	if (!test_bit(__IGB_DOWN, &adapter->state)) {
+		if (mac->type == e1000_i350 && hw->bus.func == 0) {
+			/* If present, re-initialize the external thermal sensor
+			 * interface.
+			 */
+			if (adapter->ets)
+				mac->ops.init_thermal_sensor_thresh(hw);
+		}
+	}
+#endif
 	if (!netif_running(adapter->netdev))
 		igb_power_down_link(adapter);
 
@@ -1822,6 +1922,37 @@ void igb_set_fw_version(struct igb_adapter *adapter)
 	return;
 }
 
+static const struct i2c_board_info i350_sensor_info = {
+	I2C_BOARD_INFO("i350bb", 0Xf8),
+};
+
+/*  igb_init_i2c - Init I2C interface
+ *  @adapter: pointer to adapter structure
+ *
+ */
+static s32 igb_init_i2c(struct igb_adapter *adapter)
+{
+	s32 status = E1000_SUCCESS;
+
+	/* I2C interface supported on i350 devices */
+	if (adapter->hw.mac.type != e1000_i350)
+		return E1000_SUCCESS;
+
+	/* Initialize the i2c bus which is controlled by the registers.
+	 * This bus will use the i2c_algo_bit structue that implements
+	 * the protocol through toggling of the 4 bits in the register.
+	 */
+	adapter->i2c_adap.owner = THIS_MODULE;
+	adapter->i2c_algo = igb_i2c_algo;
+	adapter->i2c_algo.data = adapter;
+	adapter->i2c_adap.algo_data = &adapter->i2c_algo;
+	adapter->i2c_adap.dev.parent = &adapter->pdev->dev;
+	strlcpy(adapter->i2c_adap.name, "igb BB",
+		sizeof(adapter->i2c_adap.name));
+	status = i2c_bit_add_bus(&adapter->i2c_adap);
+	return status;
+}
+
 /**
  * igb_probe - Device Initialization Routine
  * @pdev: PCI device information struct
@@ -2114,6 +2245,13 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* reset the hardware with the new settings */
 	igb_reset(adapter);
 
+	/* Init the I2C interface */
+	err = igb_init_i2c(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "failed to init i2c interface\n");
+		goto err_eeprom;
+	}
+
 	/* let the f/w know that the h/w is now under the control of the
 	 * driver. */
 	igb_get_hw_control(adapter);
@@ -2134,7 +2272,27 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 #endif
+#ifdef CONFIG_IGB_HWMON
+	/* Initialize the thermal sensor on i350 devices. */
+	if (hw->mac.type == e1000_i350 && hw->bus.func == 0) {
+		u16 ets_word;
 
+		/*
+		 * Read the NVM to determine if this i350 device supports an
+		 * external thermal sensor.
+		 */
+		hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_word);
+		if (ets_word != 0x0000 && ets_word != 0xFFFF)
+			adapter->ets = true;
+		else
+			adapter->ets = false;
+		if (igb_sysfs_init(adapter))
+			dev_err(&pdev->dev,
+				"failed to allocate sysfs resources\n");
+	} else {
+		adapter->ets = false;
+	}
+#endif
 	/* do hw tstamp init after resetting */
 	igb_ptp_init(adapter);
 
@@ -2175,6 +2333,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 err_register:
 	igb_release_hw_control(adapter);
+	memset(&adapter->i2c_adap, 0, sizeof(adapter->i2c_adap));
 err_eeprom:
 	if (!igb_check_reset_block(hw))
 		igb_reset_phy(hw);
@@ -2195,6 +2354,111 @@ err_dma:
 	return err;
 }
 
+#ifdef CONFIG_PCI_IOV
+static int  igb_disable_sriov(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+
+	/* reclaim resources allocated to VFs */
+	if (adapter->vf_data) {
+		/* disable iov and allow time for transactions to clear */
+		if (igb_vfs_are_assigned(adapter)) {
+			dev_warn(&pdev->dev,
+				 "Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated\n");
+			return -EPERM;
+		} else {
+			pci_disable_sriov(pdev);
+			msleep(500);
+		}
+
+		kfree(adapter->vf_data);
+		adapter->vf_data = NULL;
+		adapter->vfs_allocated_count = 0;
+		wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
+		wrfl();
+		msleep(100);
+		dev_info(&pdev->dev, "IOV Disabled\n");
+
+		/* Re-enable DMA Coalescing flag since IOV is turned off */
+		adapter->flags |= IGB_FLAG_DMAC;
+	}
+
+	return 0;
+}
+
+static int igb_enable_sriov(struct pci_dev *pdev, int num_vfs)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	int old_vfs = pci_num_vf(pdev);
+	int err = 0;
+	int i;
+
+	if (!num_vfs)
+		goto out;
+	else if (old_vfs && old_vfs == num_vfs)
+		goto out;
+	else if (old_vfs && old_vfs != num_vfs)
+		err = igb_disable_sriov(pdev);
+
+	if (err)
+		goto out;
+
+	if (num_vfs > 7) {
+		err = -EPERM;
+		goto out;
+	}
+
+	adapter->vfs_allocated_count = num_vfs;
+
+	adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
+				sizeof(struct vf_data_storage), GFP_KERNEL);
+
+	/* if allocation failed then we do not support SR-IOV */
+	if (!adapter->vf_data) {
+		adapter->vfs_allocated_count = 0;
+		dev_err(&pdev->dev,
+			"Unable to allocate memory for VF Data Storage\n");
+		err = -ENOMEM;
+		goto out;
+	}
+
+	err = pci_enable_sriov(pdev, adapter->vfs_allocated_count);
+	if (err)
+		goto err_out;
+
+	dev_info(&pdev->dev, "%d VFs allocated\n",
+		 adapter->vfs_allocated_count);
+	for (i = 0; i < adapter->vfs_allocated_count; i++)
+		igb_vf_configure(adapter, i);
+
+	/* DMA Coalescing is not supported in IOV mode. */
+	adapter->flags &= ~IGB_FLAG_DMAC;
+	goto out;
+
+err_out:
+	kfree(adapter->vf_data);
+	adapter->vf_data = NULL;
+	adapter->vfs_allocated_count = 0;
+out:
+	return err;
+}
+
+#endif
+/*
+ *  igb_remove_i2c - Cleanup  I2C interface
+ *  @adapter: pointer to adapter structure
+ *
+ */
+static void igb_remove_i2c(struct igb_adapter *adapter)
+{
+
+	/* free the adapter bus structure */
+	i2c_del_adapter(&adapter->i2c_adap);
+}
+
 /**
  * igb_remove - Device Removal Routine
  * @pdev: PCI device information struct
@@ -2211,8 +2475,11 @@ static void igb_remove(struct pci_dev *pdev)
 	struct e1000_hw *hw = &adapter->hw;
 
 	pm_runtime_get_noresume(&pdev->dev);
+#ifdef CONFIG_IGB_HWMON
+	igb_sysfs_exit(adapter);
+#endif
+	igb_remove_i2c(adapter);
 	igb_ptp_stop(adapter);
-
 	/*
 	 * The watchdog timer may be rescheduled, so explicitly
 	 * disable watchdog from being rescheduled.
@@ -2242,23 +2509,7 @@ static void igb_remove(struct pci_dev *pdev)
 	igb_clear_interrupt_scheme(adapter);
 
 #ifdef CONFIG_PCI_IOV
-	/* reclaim resources allocated to VFs */
-	if (adapter->vf_data) {
-		/* disable iov and allow time for transactions to clear */
-		if (igb_vfs_are_assigned(adapter)) {
-			dev_info(&pdev->dev, "Unloading driver while VFs are assigned - VFs will not be deallocated\n");
-		} else {
-			pci_disable_sriov(pdev);
-			msleep(500);
-		}
-
-		kfree(adapter->vf_data);
-		adapter->vf_data = NULL;
-		wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
-		wrfl();
-		msleep(100);
-		dev_info(&pdev->dev, "IOV Disabled\n");
-	}
+	igb_disable_sriov(pdev);
 #endif
 
 	iounmap(hw->hw_addr);
@@ -2289,103 +2540,22 @@ static void igb_probe_vfs(struct igb_adapter *adapter)
 #ifdef CONFIG_PCI_IOV
 	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_hw *hw = &adapter->hw;
-	int old_vfs = pci_num_vf(adapter->pdev);
-	int i;
 
 	/* Virtualization features not supported on i210 family. */
 	if ((hw->mac.type == e1000_i210) || (hw->mac.type == e1000_i211))
 		return;
 
-	if (old_vfs) {
-		dev_info(&pdev->dev, "%d pre-allocated VFs found - override "
-			 "max_vfs setting of %d\n", old_vfs, max_vfs);
-		adapter->vfs_allocated_count = old_vfs;
-	}
-
-	if (!adapter->vfs_allocated_count)
-		return;
-
-	adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
-				sizeof(struct vf_data_storage), GFP_KERNEL);
+	igb_enable_sriov(pdev, max_vfs);
+	pci_sriov_set_totalvfs(pdev, 7);
 
-	/* if allocation failed then we do not support SR-IOV */
-	if (!adapter->vf_data) {
-		adapter->vfs_allocated_count = 0;
-		dev_err(&pdev->dev, "Unable to allocate memory for VF "
-			"Data Storage\n");
-		goto out;
-	}
-
-	if (!old_vfs) {
-		if (pci_enable_sriov(pdev, adapter->vfs_allocated_count))
-			goto err_out;
-	}
-	dev_info(&pdev->dev, "%d VFs allocated\n",
-		 adapter->vfs_allocated_count);
-	for (i = 0; i < adapter->vfs_allocated_count; i++)
-		igb_vf_configure(adapter, i);
-
-	/* DMA Coalescing is not supported in IOV mode. */
-	adapter->flags &= ~IGB_FLAG_DMAC;
-	goto out;
-err_out:
-	kfree(adapter->vf_data);
-	adapter->vf_data = NULL;
-	adapter->vfs_allocated_count = 0;
-out:
-	return;
 #endif /* CONFIG_PCI_IOV */
 }
 
-/**
- * igb_sw_init - Initialize general software structures (struct igb_adapter)
- * @adapter: board private structure to initialize
- *
- * igb_sw_init initializes the Adapter private data structure.
- * Fields are initialized based on PCI device information and
- * OS network device settings (MTU size).
- **/
-static int igb_sw_init(struct igb_adapter *adapter)
+static void igb_init_queue_configuration(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	struct net_device *netdev = adapter->netdev;
-	struct pci_dev *pdev = adapter->pdev;
 	u32 max_rss_queues;
 
-	pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
-
-	/* set default ring sizes */
-	adapter->tx_ring_count = IGB_DEFAULT_TXD;
-	adapter->rx_ring_count = IGB_DEFAULT_RXD;
-
-	/* set default ITR values */
-	adapter->rx_itr_setting = IGB_DEFAULT_ITR;
-	adapter->tx_itr_setting = IGB_DEFAULT_ITR;
-
-	/* set default work limits */
-	adapter->tx_work_limit = IGB_DEFAULT_TX_WORK;
-
-	adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN +
-				  VLAN_HLEN;
-	adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
-
-	spin_lock_init(&adapter->stats64_lock);
-#ifdef CONFIG_PCI_IOV
-	switch (hw->mac.type) {
-	case e1000_82576:
-	case e1000_i350:
-		if (max_vfs > 7) {
-			dev_warn(&pdev->dev,
-				 "Maximum of 7 VFs per PF, using max\n");
-			adapter->vfs_allocated_count = 7;
-		} else
-			adapter->vfs_allocated_count = max_vfs;
-		break;
-	default:
-		break;
-	}
-#endif /* CONFIG_PCI_IOV */
-
 	/* Determine the maximum number of RSS queues supported. */
 	switch (hw->mac.type) {
 	case e1000_i211:
@@ -2444,6 +2614,60 @@ static int igb_sw_init(struct igb_adapter *adapter)
 			adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
 		break;
 	}
+}
+
+/**
+ * igb_sw_init - Initialize general software structures (struct igb_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * igb_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int igb_sw_init(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+
+	pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
+
+	/* set default ring sizes */
+	adapter->tx_ring_count = IGB_DEFAULT_TXD;
+	adapter->rx_ring_count = IGB_DEFAULT_RXD;
+
+	/* set default ITR values */
+	adapter->rx_itr_setting = IGB_DEFAULT_ITR;
+	adapter->tx_itr_setting = IGB_DEFAULT_ITR;
+
+	/* set default work limits */
+	adapter->tx_work_limit = IGB_DEFAULT_TX_WORK;
+
+	adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN +
+				  VLAN_HLEN;
+	adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+
+	spin_lock_init(&adapter->stats64_lock);
+#ifdef CONFIG_PCI_IOV
+	switch (hw->mac.type) {
+	case e1000_82576:
+	case e1000_i350:
+		if (max_vfs > 7) {
+			dev_warn(&pdev->dev,
+				 "Maximum of 7 VFs per PF, using max\n");
+			adapter->vfs_allocated_count = 7;
+		} else
+			adapter->vfs_allocated_count = max_vfs;
+		if (adapter->vfs_allocated_count)
+			dev_warn(&pdev->dev,
+				 "Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.\n");
+		break;
+	default:
+		break;
+	}
+#endif /* CONFIG_PCI_IOV */
+
+	igb_init_queue_configuration(adapter);
 
 	/* Setup and initialize a copy of the hw vlan table array */
 	adapter->shadow_vfta = kzalloc(sizeof(u32) *
@@ -3767,6 +3991,7 @@ static void igb_watchdog_task(struct work_struct *work)
 	}
 
 	igb_spoof_check(adapter);
+	igb_ptp_rx_hang(adapter);
 
 	/* Reset the timer */
 	if (!test_bit(__IGB_DOWN, &adapter->state))
@@ -4386,12 +4611,15 @@ netdev_tx_t igb_xmit_frame_ring(struct sk_buff *skb,
 	first->bytecount = skb->len;
 	first->gso_segs = 1;
 
+	skb_tx_timestamp(skb);
+
 	if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) &&
 		     !(adapter->ptp_tx_skb))) {
 		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
 		tx_flags |= IGB_TX_FLAGS_TSTAMP;
 
 		adapter->ptp_tx_skb = skb_get(skb);
+		adapter->ptp_tx_start = jiffies;
 		if (adapter->hw.mac.type == e1000_82576)
 			schedule_work(&adapter->ptp_tx_work);
 	}
@@ -6902,6 +7130,72 @@ static void igb_shutdown(struct pci_dev *pdev)
 	}
 }
 
+#ifdef CONFIG_PCI_IOV
+static int igb_sriov_reinit(struct pci_dev *dev)
+{
+	struct net_device *netdev = pci_get_drvdata(dev);
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct pci_dev *pdev = adapter->pdev;
+
+	rtnl_lock();
+
+	if (netif_running(netdev))
+		igb_close(netdev);
+
+	igb_clear_interrupt_scheme(adapter);
+
+	igb_init_queue_configuration(adapter);
+
+	if (igb_init_interrupt_scheme(adapter, true)) {
+		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+		return -ENOMEM;
+	}
+
+	if (netif_running(netdev))
+		igb_open(netdev);
+
+	rtnl_unlock();
+
+	return 0;
+}
+
+static int igb_pci_disable_sriov(struct pci_dev *dev)
+{
+	int err = igb_disable_sriov(dev);
+
+	if (!err)
+		err = igb_sriov_reinit(dev);
+
+	return err;
+}
+
+static int igb_pci_enable_sriov(struct pci_dev *dev, int num_vfs)
+{
+	int err = igb_enable_sriov(dev, num_vfs);
+
+	if (err)
+		goto out;
+
+	err = igb_sriov_reinit(dev);
+	if (!err)
+		return num_vfs;
+
+out:
+	return err;
+}
+
+#endif
+static int igb_pci_sriov_configure(struct pci_dev *dev, int num_vfs)
+{
+#ifdef CONFIG_PCI_IOV
+	if (num_vfs == 0)
+		return igb_pci_disable_sriov(dev);
+	else
+		return igb_pci_enable_sriov(dev, num_vfs);
+#endif
+	return 0;
+}
+
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /*
  * Polling 'interrupt' - used by things like netconsole to send skbs
@@ -7307,4 +7601,138 @@ static void igb_init_dmac(struct igb_adapter *adapter, u32 pba)
 	}
 }
 
+static DEFINE_SPINLOCK(i2c_clients_lock);
+
+/*  igb_get_i2c_client - returns matching client
+ *  in adapters's client list.
+ *  @adapter: adapter struct
+ *  @dev_addr: device address of i2c needed.
+ */
+struct i2c_client *
+igb_get_i2c_client(struct igb_adapter *adapter, u8 dev_addr)
+{
+	ulong flags;
+	struct igb_i2c_client_list *client_list;
+	struct i2c_client *client = NULL;
+	struct i2c_board_info client_info = {
+		I2C_BOARD_INFO("igb", 0x00),
+	};
+
+	spin_lock_irqsave(&i2c_clients_lock, flags);
+	client_list = adapter->i2c_clients;
+
+	/* See if we already have an i2c_client */
+	while (client_list) {
+		if (client_list->client->addr == (dev_addr >> 1)) {
+			client = client_list->client;
+			goto exit;
+		} else {
+			client_list = client_list->next;
+		}
+	}
+
+	/* no client_list found, create a new one as long as
+	 * irqs are not disabled
+	 */
+	if (unlikely(irqs_disabled()))
+		goto exit;
+
+	client_list = kzalloc(sizeof(*client_list), GFP_KERNEL);
+	if (client_list == NULL)
+		goto exit;
+
+	/* dev_addr passed to us is left-shifted by 1 bit
+	 * i2c_new_device call expects it to be flush to the right.
+	 */
+	client_info.addr = dev_addr >> 1;
+	client_info.platform_data = adapter;
+	client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info);
+	if (client_list->client == NULL) {
+		dev_info(&adapter->pdev->dev,
+			"Failed to create new i2c device..\n");
+		goto err_no_client;
+	}
+
+	/* insert new client at head of list */
+	client_list->next = adapter->i2c_clients;
+	adapter->i2c_clients = client_list;
+
+	client = client_list->client;
+	goto exit;
+
+err_no_client:
+	kfree(client_list);
+exit:
+	spin_unlock_irqrestore(&i2c_clients_lock, flags);
+	return client;
+}
+
+/*  igb_read_i2c_byte - Reads 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to read
+ *  @dev_addr: device address
+ *  @data: value read
+ *
+ *  Performs byte read operation over I2C interface at
+ *  a specified device address.
+ */
+s32 igb_read_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+				u8 dev_addr, u8 *data)
+{
+	struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
+	struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+	s32 status;
+	u16 swfw_mask = 0;
+
+	if (!this_client)
+		return E1000_ERR_I2C;
+
+	swfw_mask = E1000_SWFW_PHY0_SM;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)
+	    != E1000_SUCCESS)
+		return E1000_ERR_SWFW_SYNC;
+
+	status = i2c_smbus_read_byte_data(this_client, byte_offset);
+	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+	if (status < 0)
+		return E1000_ERR_I2C;
+	else {
+		*data = status;
+		return E1000_SUCCESS;
+	}
+}
+
+/*  igb_write_i2c_byte - Writes 8 bit word over I2C
+ *  @hw: pointer to hardware structure
+ *  @byte_offset: byte offset to write
+ *  @dev_addr: device address
+ *  @data: value to write
+ *
+ *  Performs byte write operation over I2C interface at
+ *  a specified device address.
+ */
+s32 igb_write_i2c_byte(struct e1000_hw *hw, u8 byte_offset,
+				 u8 dev_addr, u8 data)
+{
+	struct igb_adapter *adapter = container_of(hw, struct igb_adapter, hw);
+	struct i2c_client *this_client = igb_get_i2c_client(adapter, dev_addr);
+	s32 status;
+	u16 swfw_mask = E1000_SWFW_PHY0_SM;
+
+	if (!this_client)
+		return E1000_ERR_I2C;
+
+	if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS)
+		return E1000_ERR_SWFW_SYNC;
+	status = i2c_smbus_write_byte_data(this_client, byte_offset, data);
+	hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+	if (status)
+		return E1000_ERR_I2C;
+	else
+		return E1000_SUCCESS;
+
+}
 /* igb_main.c */
diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index ab3429729bde..0987822359f0 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/pci.h>
+#include <linux/ptp_classify.h>
 
 #include "igb.h"
 
@@ -70,6 +71,7 @@
  */
 
 #define IGB_SYSTIM_OVERFLOW_PERIOD	(HZ * 60 * 9)
+#define IGB_PTP_TX_TIMEOUT		(HZ * 15)
 #define INCPERIOD_82576			(1 << E1000_TIMINCA_16NS_SHIFT)
 #define INCVALUE_82576_MASK		((1 << E1000_TIMINCA_16NS_SHIFT) - 1)
 #define INCVALUE_82576			(16 << IGB_82576_TSYNC_SHIFT)
@@ -396,6 +398,15 @@ void igb_ptp_tx_work(struct work_struct *work)
 	if (!adapter->ptp_tx_skb)
 		return;
 
+	if (time_is_before_jiffies(adapter->ptp_tx_start +
+				   IGB_PTP_TX_TIMEOUT)) {
+		dev_kfree_skb_any(adapter->ptp_tx_skb);
+		adapter->ptp_tx_skb = NULL;
+		adapter->tx_hwtstamp_timeouts++;
+		dev_warn(&adapter->pdev->dev, "clearing Tx timestamp hang");
+		return;
+	}
+
 	tsynctxctl = rd32(E1000_TSYNCTXCTL);
 	if (tsynctxctl & E1000_TSYNCTXCTL_VALID)
 		igb_ptp_tx_hwtstamp(adapter);
@@ -419,6 +430,51 @@ static void igb_ptp_overflow_check(struct work_struct *work)
 }
 
 /**
+ * igb_ptp_rx_hang - detect error case when Rx timestamp registers latched
+ * @adapter: private network adapter structure
+ *
+ * This watchdog task is scheduled to detect error case where hardware has
+ * dropped an Rx packet that was timestamped when the ring is full. The
+ * particular error is rare but leaves the device in a state unable to timestamp
+ * any future packets.
+ */
+void igb_ptp_rx_hang(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	struct igb_ring *rx_ring;
+	u32 tsyncrxctl = rd32(E1000_TSYNCRXCTL);
+	unsigned long rx_event;
+	int n;
+
+	if (hw->mac.type != e1000_82576)
+		return;
+
+	/* If we don't have a valid timestamp in the registers, just update the
+	 * timeout counter and exit
+	 */
+	if (!(tsyncrxctl & E1000_TSYNCRXCTL_VALID)) {
+		adapter->last_rx_ptp_check = jiffies;
+		return;
+	}
+
+	/* Determine the most recent watchdog or rx_timestamp event */
+	rx_event = adapter->last_rx_ptp_check;
+	for (n = 0; n < adapter->num_rx_queues; n++) {
+		rx_ring = adapter->rx_ring[n];
+		if (time_after(rx_ring->last_rx_timestamp, rx_event))
+			rx_event = rx_ring->last_rx_timestamp;
+	}
+
+	/* Only need to read the high RXSTMP register to clear the lock */
+	if (time_is_before_jiffies(rx_event + 5 * HZ)) {
+		rd32(E1000_RXSTMPH);
+		adapter->last_rx_ptp_check = jiffies;
+		adapter->rx_hwtstamp_cleared++;
+		dev_warn(&adapter->pdev->dev, "clearing Rx timestamp hang");
+	}
+}
+
+/**
  * igb_ptp_tx_hwtstamp - utility function which checks for TX time stamp
  * @adapter: Board private structure.
  *
@@ -643,7 +699,6 @@ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev,
 	else
 		wr32(E1000_ETQF(3), 0);
 
-#define PTP_PORT 319
 	/* L4 Queue Filter[3]: filter by destination port and protocol */
 	if (is_l4) {
 		u32 ftqf = (IPPROTO_UDP /* UDP */
@@ -652,12 +707,12 @@ int igb_ptp_hwtstamp_ioctl(struct net_device *netdev,
 			| E1000_FTQF_MASK); /* mask all inputs */
 		ftqf &= ~E1000_FTQF_MASK_PROTO_BP; /* enable protocol check */
 
-		wr32(E1000_IMIR(3), htons(PTP_PORT));
+		wr32(E1000_IMIR(3), htons(PTP_EV_PORT));
 		wr32(E1000_IMIREXT(3),
 		     (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP));
 		if (hw->mac.type == e1000_82576) {
 			/* enable source port check */
-			wr32(E1000_SPQF(3), htons(PTP_PORT));
+			wr32(E1000_SPQF(3), htons(PTP_EV_PORT));
 			ftqf &= ~E1000_FTQF_MASK_SOURCE_PORT_BP;
 		}
 		wr32(E1000_FTQF(3), ftqf);
@@ -801,6 +856,10 @@ void igb_ptp_stop(struct igb_adapter *adapter)
 	}
 
 	cancel_work_sync(&adapter->ptp_tx_work);
+	if (adapter->ptp_tx_skb) {
+		dev_kfree_skb_any(adapter->ptp_tx_skb);
+		adapter->ptp_tx_skb = NULL;
+	}
 
 	if (adapter->ptp_clock) {
 		ptp_clock_unregister(adapter->ptp_clock);