diff options
| -rw-r--r-- | include/linux/ieee80211-ht.h | 292 | ||||
| -rw-r--r-- | include/linux/ieee80211.h | 272 |
2 files changed, 293 insertions, 271 deletions
diff --git a/include/linux/ieee80211-ht.h b/include/linux/ieee80211-ht.h new file mode 100644 index 000000000000..21bbf470540f --- /dev/null +++ b/include/linux/ieee80211-ht.h @@ -0,0 +1,292 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * IEEE 802.11 HT definitions + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * <jkmaline@cc.hut.fi> + * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi> + * Copyright (c) 2005, Devicescape Software, Inc. + * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net> + * Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright (c) 2016 - 2017 Intel Deutschland GmbH + * Copyright (c) 2018 - 2025 Intel Corporation + */ + +#ifndef LINUX_IEEE80211_HT_H +#define LINUX_IEEE80211_HT_H + +#include <linux/types.h> +#include <linux/if_ether.h> + +/* Maximal size of an A-MSDU that can be transported in a HT BA session */ +#define IEEE80211_MAX_MPDU_LEN_HT_BA 4095 + +/* Maximal size of an A-MSDU */ +#define IEEE80211_MAX_MPDU_LEN_HT_3839 3839 +#define IEEE80211_MAX_MPDU_LEN_HT_7935 7935 + +#define IEEE80211_HT_CTL_LEN 4 + +enum ieee80211_ht_chanwidth_values { + IEEE80211_HT_CHANWIDTH_20MHZ = 0, + IEEE80211_HT_CHANWIDTH_ANY = 1, +}; + +/** + * struct ieee80211_bar - Block Ack Request frame format + * @frame_control: Frame Control + * @duration: Duration + * @ra: RA + * @ta: TA + * @control: BAR Control + * @start_seq_num: Starting Sequence Number (see Figure 9-37) + * + * This structure represents the "BlockAckReq frame format" + * as described in IEEE Std 802.11-2020 section 9.3.1.7. +*/ +struct ieee80211_bar { + __le16 frame_control; + __le16 duration; + __u8 ra[ETH_ALEN]; + __u8 ta[ETH_ALEN]; + __le16 control; + __le16 start_seq_num; +} __packed; + +/* 802.11 BAR control masks */ +#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 +#define IEEE80211_BAR_CTRL_MULTI_TID 0x0002 +#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004 +#define IEEE80211_BAR_CTRL_TID_INFO_MASK 0xf000 +#define IEEE80211_BAR_CTRL_TID_INFO_SHIFT 12 + +#define IEEE80211_HT_MCS_MASK_LEN 10 + +/** + * struct ieee80211_mcs_info - Supported MCS Set field + * @rx_mask: RX mask + * @rx_highest: highest supported RX rate. If set represents + * the highest supported RX data rate in units of 1 Mbps. + * If this field is 0 this value should not be used to + * consider the highest RX data rate supported. + * @tx_params: TX parameters + * @reserved: Reserved bits + * + * This structure represents the "Supported MCS Set field" as + * described in IEEE Std 802.11-2020 section 9.4.2.55.4. + */ +struct ieee80211_mcs_info { + u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN]; + __le16 rx_highest; + u8 tx_params; + u8 reserved[3]; +} __packed; + +/* 802.11n HT capability MSC set */ +#define IEEE80211_HT_MCS_RX_HIGHEST_MASK 0x3ff +#define IEEE80211_HT_MCS_TX_DEFINED 0x01 +#define IEEE80211_HT_MCS_TX_RX_DIFF 0x02 +/* value 0 == 1 stream etc */ +#define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK 0x0C +#define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT 2 +#define IEEE80211_HT_MCS_TX_MAX_STREAMS 4 +#define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION 0x10 + +#define IEEE80211_HT_MCS_CHAINS(mcs) ((mcs) == 32 ? 1 : (1 + ((mcs) >> 3))) + +/* + * 802.11n D5.0 20.3.5 / 20.6 says: + * - indices 0 to 7 and 32 are single spatial stream + * - 8 to 31 are multiple spatial streams using equal modulation + * [8..15 for two streams, 16..23 for three and 24..31 for four] + * - remainder are multiple spatial streams using unequal modulation + */ +#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33 +#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \ + (IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8) + +/** + * struct ieee80211_ht_cap - HT capabilities element + * @cap_info: HT Capability Information + * @ampdu_params_info: A-MPDU Parameters + * @mcs: Supported MCS Set + * @extended_ht_cap_info: HT Extended Capabilities + * @tx_BF_cap_info: Transmit Beamforming Capabilities + * @antenna_selection_info: ASEL Capability + * + * This structure represents the payload of the "HT Capabilities + * element" as described in IEEE Std 802.11-2020 section 9.4.2.55. + */ +struct ieee80211_ht_cap { + __le16 cap_info; + u8 ampdu_params_info; + + /* 16 bytes MCS information */ + struct ieee80211_mcs_info mcs; + + __le16 extended_ht_cap_info; + __le32 tx_BF_cap_info; + u8 antenna_selection_info; +} __packed; + +/* 802.11n HT capabilities masks (for cap_info) */ +#define IEEE80211_HT_CAP_LDPC_CODING 0x0001 +#define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002 +#define IEEE80211_HT_CAP_SM_PS 0x000C +#define IEEE80211_HT_CAP_SM_PS_SHIFT 2 +#define IEEE80211_HT_CAP_GRN_FLD 0x0010 +#define IEEE80211_HT_CAP_SGI_20 0x0020 +#define IEEE80211_HT_CAP_SGI_40 0x0040 +#define IEEE80211_HT_CAP_TX_STBC 0x0080 +#define IEEE80211_HT_CAP_RX_STBC 0x0300 +#define IEEE80211_HT_CAP_RX_STBC_SHIFT 8 +#define IEEE80211_HT_CAP_DELAY_BA 0x0400 +#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 +#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 +#define IEEE80211_HT_CAP_RESERVED 0x2000 +#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000 +#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000 + +/* 802.11n HT extended capabilities masks (for extended_ht_cap_info) */ +#define IEEE80211_HT_EXT_CAP_PCO 0x0001 +#define IEEE80211_HT_EXT_CAP_PCO_TIME 0x0006 +#define IEEE80211_HT_EXT_CAP_PCO_TIME_SHIFT 1 +#define IEEE80211_HT_EXT_CAP_MCS_FB 0x0300 +#define IEEE80211_HT_EXT_CAP_MCS_FB_SHIFT 8 +#define IEEE80211_HT_EXT_CAP_HTC_SUP 0x0400 +#define IEEE80211_HT_EXT_CAP_RD_RESPONDER 0x0800 + +/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */ +#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03 +#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C +#define IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT 2 + +/* + * Maximum length of AMPDU that the STA can receive in high-throughput (HT). + * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets) + */ +enum ieee80211_max_ampdu_length_exp { + IEEE80211_HT_MAX_AMPDU_8K = 0, + IEEE80211_HT_MAX_AMPDU_16K = 1, + IEEE80211_HT_MAX_AMPDU_32K = 2, + IEEE80211_HT_MAX_AMPDU_64K = 3 +}; + +#define IEEE80211_HT_MAX_AMPDU_FACTOR 13 + +/* Minimum MPDU start spacing */ +enum ieee80211_min_mpdu_spacing { + IEEE80211_HT_MPDU_DENSITY_NONE = 0, /* No restriction */ + IEEE80211_HT_MPDU_DENSITY_0_25 = 1, /* 1/4 usec */ + IEEE80211_HT_MPDU_DENSITY_0_5 = 2, /* 1/2 usec */ + IEEE80211_HT_MPDU_DENSITY_1 = 3, /* 1 usec */ + IEEE80211_HT_MPDU_DENSITY_2 = 4, /* 2 usec */ + IEEE80211_HT_MPDU_DENSITY_4 = 5, /* 4 usec */ + IEEE80211_HT_MPDU_DENSITY_8 = 6, /* 8 usec */ + IEEE80211_HT_MPDU_DENSITY_16 = 7 /* 16 usec */ +}; + +/** + * struct ieee80211_ht_operation - HT operation IE + * @primary_chan: Primary Channel + * @ht_param: HT Operation Information parameters + * @operation_mode: HT Operation Information operation mode + * @stbc_param: HT Operation Information STBC params + * @basic_set: Basic HT-MCS Set + * + * This structure represents the payload of the "HT Operation + * element" as described in IEEE Std 802.11-2020 section 9.4.2.56. + */ +struct ieee80211_ht_operation { + u8 primary_chan; + u8 ht_param; + __le16 operation_mode; + __le16 stbc_param; + u8 basic_set[16]; +} __packed; + +/* for ht_param */ +#define IEEE80211_HT_PARAM_CHA_SEC_OFFSET 0x03 +#define IEEE80211_HT_PARAM_CHA_SEC_NONE 0x00 +#define IEEE80211_HT_PARAM_CHA_SEC_ABOVE 0x01 +#define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03 +#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04 +#define IEEE80211_HT_PARAM_RIFS_MODE 0x08 + +/* for operation_mode */ +#define IEEE80211_HT_OP_MODE_PROTECTION 0x0003 +#define IEEE80211_HT_OP_MODE_PROTECTION_NONE 0 +#define IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER 1 +#define IEEE80211_HT_OP_MODE_PROTECTION_20MHZ 2 +#define IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED 3 +#define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT 0x0004 +#define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT 0x0010 +#define IEEE80211_HT_OP_MODE_CCFS2_SHIFT 5 +#define IEEE80211_HT_OP_MODE_CCFS2_MASK 0x1fe0 + +/* for stbc_param */ +#define IEEE80211_HT_STBC_PARAM_DUAL_BEACON 0x0040 +#define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT 0x0080 +#define IEEE80211_HT_STBC_PARAM_STBC_BEACON 0x0100 +#define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT 0x0200 +#define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE 0x0400 +#define IEEE80211_HT_STBC_PARAM_PCO_PHASE 0x0800 + + +/* block-ack parameters */ +#define IEEE80211_ADDBA_PARAM_AMSDU_MASK 0x0001 +#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002 +#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C +#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0 +#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000 +#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800 + +/* + * A-MPDU buffer sizes + * According to HT size varies from 8 to 64 frames + * HE adds the ability to have up to 256 frames. + * EHT adds the ability to have up to 1K frames. + */ +#define IEEE80211_MIN_AMPDU_BUF 0x8 +#define IEEE80211_MAX_AMPDU_BUF_HT 0x40 +#define IEEE80211_MAX_AMPDU_BUF_HE 0x100 +#define IEEE80211_MAX_AMPDU_BUF_EHT 0x400 + + +/* Spatial Multiplexing Power Save Modes (for capability) */ +#define WLAN_HT_CAP_SM_PS_STATIC 0 +#define WLAN_HT_CAP_SM_PS_DYNAMIC 1 +#define WLAN_HT_CAP_SM_PS_INVALID 2 +#define WLAN_HT_CAP_SM_PS_DISABLED 3 + +/* for SM power control field lower two bits */ +#define WLAN_HT_SMPS_CONTROL_DISABLED 0 +#define WLAN_HT_SMPS_CONTROL_STATIC 1 +#define WLAN_HT_SMPS_CONTROL_DYNAMIC 3 + +/* HT action codes */ +enum ieee80211_ht_actioncode { + WLAN_HT_ACTION_NOTIFY_CHANWIDTH = 0, + WLAN_HT_ACTION_SMPS = 1, + WLAN_HT_ACTION_PSMP = 2, + WLAN_HT_ACTION_PCO_PHASE = 3, + WLAN_HT_ACTION_CSI = 4, + WLAN_HT_ACTION_NONCOMPRESSED_BF = 5, + WLAN_HT_ACTION_COMPRESSED_BF = 6, + WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7, +}; + +/* BACK action code */ +enum ieee80211_back_actioncode { + WLAN_ACTION_ADDBA_REQ = 0, + WLAN_ACTION_ADDBA_RESP = 1, + WLAN_ACTION_DELBA = 2, +}; + +/* BACK (block-ack) parties */ +enum ieee80211_back_parties { + WLAN_BACK_RECIPIENT = 0, + WLAN_BACK_INITIATOR = 1, +}; + +#endif /* LINUX_IEEE80211_HT_H */ diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index fe78b150ab45..0a9b4a8025cd 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -239,13 +239,6 @@ static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2) /* 30 byte 4 addr hdr, 2 byte QoS, 2304 byte MSDU, 12 byte crypt, 4 byte FCS */ #define IEEE80211_MAX_FRAME_LEN 2352 -/* Maximal size of an A-MSDU that can be transported in a HT BA session */ -#define IEEE80211_MAX_MPDU_LEN_HT_BA 4095 - -/* Maximal size of an A-MSDU */ -#define IEEE80211_MAX_MPDU_LEN_HT_3839 3839 -#define IEEE80211_MAX_MPDU_LEN_HT_7935 7935 - #define IEEE80211_MAX_MPDU_LEN_VHT_3895 3895 #define IEEE80211_MAX_MPDU_LEN_VHT_7991 7991 #define IEEE80211_MAX_MPDU_LEN_VHT_11454 11454 @@ -302,8 +295,6 @@ static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2) #define IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK 0x03 #define IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT 5 -#define IEEE80211_HT_CTL_LEN 4 - /* trigger type within common_info of trigger frame */ #define IEEE80211_TRIGGER_TYPE_MASK 0xf #define IEEE80211_TRIGGER_TYPE_BASIC 0x0 @@ -997,11 +988,6 @@ struct ieee80211_tim_ie { }; } __packed; -enum ieee80211_ht_chanwidth_values { - IEEE80211_HT_CHANWIDTH_20MHZ = 0, - IEEE80211_HT_CHANWIDTH_ANY = 1, -}; - /** * enum ieee80211_vht_opmode_bits - VHT operating mode field bits * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK: channel width mask @@ -1677,146 +1663,6 @@ struct ieee80211_p2p_noa_attr { #define IEEE80211_P2P_OPPPS_ENABLE_BIT BIT(7) #define IEEE80211_P2P_OPPPS_CTWINDOW_MASK 0x7F -/** - * struct ieee80211_bar - Block Ack Request frame format - * @frame_control: Frame Control - * @duration: Duration - * @ra: RA - * @ta: TA - * @control: BAR Control - * @start_seq_num: Starting Sequence Number (see Figure 9-37) - * - * This structure represents the "BlockAckReq frame format" - * as described in IEEE Std 802.11-2020 section 9.3.1.7. -*/ -struct ieee80211_bar { - __le16 frame_control; - __le16 duration; - __u8 ra[ETH_ALEN]; - __u8 ta[ETH_ALEN]; - __le16 control; - __le16 start_seq_num; -} __packed; - -/* 802.11 BAR control masks */ -#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 -#define IEEE80211_BAR_CTRL_MULTI_TID 0x0002 -#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004 -#define IEEE80211_BAR_CTRL_TID_INFO_MASK 0xf000 -#define IEEE80211_BAR_CTRL_TID_INFO_SHIFT 12 - -#define IEEE80211_HT_MCS_MASK_LEN 10 - -/** - * struct ieee80211_mcs_info - Supported MCS Set field - * @rx_mask: RX mask - * @rx_highest: highest supported RX rate. If set represents - * the highest supported RX data rate in units of 1 Mbps. - * If this field is 0 this value should not be used to - * consider the highest RX data rate supported. - * @tx_params: TX parameters - * @reserved: Reserved bits - * - * This structure represents the "Supported MCS Set field" as - * described in IEEE Std 802.11-2020 section 9.4.2.55.4. - */ -struct ieee80211_mcs_info { - u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN]; - __le16 rx_highest; - u8 tx_params; - u8 reserved[3]; -} __packed; - -/* 802.11n HT capability MSC set */ -#define IEEE80211_HT_MCS_RX_HIGHEST_MASK 0x3ff -#define IEEE80211_HT_MCS_TX_DEFINED 0x01 -#define IEEE80211_HT_MCS_TX_RX_DIFF 0x02 -/* value 0 == 1 stream etc */ -#define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK 0x0C -#define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT 2 -#define IEEE80211_HT_MCS_TX_MAX_STREAMS 4 -#define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION 0x10 - -#define IEEE80211_HT_MCS_CHAINS(mcs) ((mcs) == 32 ? 1 : (1 + ((mcs) >> 3))) - -/* - * 802.11n D5.0 20.3.5 / 20.6 says: - * - indices 0 to 7 and 32 are single spatial stream - * - 8 to 31 are multiple spatial streams using equal modulation - * [8..15 for two streams, 16..23 for three and 24..31 for four] - * - remainder are multiple spatial streams using unequal modulation - */ -#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33 -#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \ - (IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8) - -/** - * struct ieee80211_ht_cap - HT capabilities element - * @cap_info: HT Capability Information - * @ampdu_params_info: A-MPDU Parameters - * @mcs: Supported MCS Set - * @extended_ht_cap_info: HT Extended Capabilities - * @tx_BF_cap_info: Transmit Beamforming Capabilities - * @antenna_selection_info: ASEL Capability - * - * This structure represents the payload of the "HT Capabilities - * element" as described in IEEE Std 802.11-2020 section 9.4.2.55. - */ -struct ieee80211_ht_cap { - __le16 cap_info; - u8 ampdu_params_info; - - /* 16 bytes MCS information */ - struct ieee80211_mcs_info mcs; - - __le16 extended_ht_cap_info; - __le32 tx_BF_cap_info; - u8 antenna_selection_info; -} __packed; - -/* 802.11n HT capabilities masks (for cap_info) */ -#define IEEE80211_HT_CAP_LDPC_CODING 0x0001 -#define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002 -#define IEEE80211_HT_CAP_SM_PS 0x000C -#define IEEE80211_HT_CAP_SM_PS_SHIFT 2 -#define IEEE80211_HT_CAP_GRN_FLD 0x0010 -#define IEEE80211_HT_CAP_SGI_20 0x0020 -#define IEEE80211_HT_CAP_SGI_40 0x0040 -#define IEEE80211_HT_CAP_TX_STBC 0x0080 -#define IEEE80211_HT_CAP_RX_STBC 0x0300 -#define IEEE80211_HT_CAP_RX_STBC_SHIFT 8 -#define IEEE80211_HT_CAP_DELAY_BA 0x0400 -#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 -#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 -#define IEEE80211_HT_CAP_RESERVED 0x2000 -#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000 -#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000 - -/* 802.11n HT extended capabilities masks (for extended_ht_cap_info) */ -#define IEEE80211_HT_EXT_CAP_PCO 0x0001 -#define IEEE80211_HT_EXT_CAP_PCO_TIME 0x0006 -#define IEEE80211_HT_EXT_CAP_PCO_TIME_SHIFT 1 -#define IEEE80211_HT_EXT_CAP_MCS_FB 0x0300 -#define IEEE80211_HT_EXT_CAP_MCS_FB_SHIFT 8 -#define IEEE80211_HT_EXT_CAP_HTC_SUP 0x0400 -#define IEEE80211_HT_EXT_CAP_RD_RESPONDER 0x0800 - -/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */ -#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03 -#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C -#define IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT 2 - -/* - * Maximum length of AMPDU that the STA can receive in high-throughput (HT). - * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets) - */ -enum ieee80211_max_ampdu_length_exp { - IEEE80211_HT_MAX_AMPDU_8K = 0, - IEEE80211_HT_MAX_AMPDU_16K = 1, - IEEE80211_HT_MAX_AMPDU_32K = 2, - IEEE80211_HT_MAX_AMPDU_64K = 3 -}; - /* * Maximum length of AMPDU that the STA can receive in VHT. * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets) @@ -1832,98 +1678,6 @@ enum ieee80211_vht_max_ampdu_length_exp { IEEE80211_VHT_MAX_AMPDU_1024K = 7 }; -#define IEEE80211_HT_MAX_AMPDU_FACTOR 13 - -/* Minimum MPDU start spacing */ -enum ieee80211_min_mpdu_spacing { - IEEE80211_HT_MPDU_DENSITY_NONE = 0, /* No restriction */ - IEEE80211_HT_MPDU_DENSITY_0_25 = 1, /* 1/4 usec */ - IEEE80211_HT_MPDU_DENSITY_0_5 = 2, /* 1/2 usec */ - IEEE80211_HT_MPDU_DENSITY_1 = 3, /* 1 usec */ - IEEE80211_HT_MPDU_DENSITY_2 = 4, /* 2 usec */ - IEEE80211_HT_MPDU_DENSITY_4 = 5, /* 4 usec */ - IEEE80211_HT_MPDU_DENSITY_8 = 6, /* 8 usec */ - IEEE80211_HT_MPDU_DENSITY_16 = 7 /* 16 usec */ -}; - -/** - * struct ieee80211_ht_operation - HT operation IE - * @primary_chan: Primary Channel - * @ht_param: HT Operation Information parameters - * @operation_mode: HT Operation Information operation mode - * @stbc_param: HT Operation Information STBC params - * @basic_set: Basic HT-MCS Set - * - * This structure represents the payload of the "HT Operation - * element" as described in IEEE Std 802.11-2020 section 9.4.2.56. - */ -struct ieee80211_ht_operation { - u8 primary_chan; - u8 ht_param; - __le16 operation_mode; - __le16 stbc_param; - u8 basic_set[16]; -} __packed; - -/* for ht_param */ -#define IEEE80211_HT_PARAM_CHA_SEC_OFFSET 0x03 -#define IEEE80211_HT_PARAM_CHA_SEC_NONE 0x00 -#define IEEE80211_HT_PARAM_CHA_SEC_ABOVE 0x01 -#define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03 -#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04 -#define IEEE80211_HT_PARAM_RIFS_MODE 0x08 - -/* for operation_mode */ -#define IEEE80211_HT_OP_MODE_PROTECTION 0x0003 -#define IEEE80211_HT_OP_MODE_PROTECTION_NONE 0 -#define IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER 1 -#define IEEE80211_HT_OP_MODE_PROTECTION_20MHZ 2 -#define IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED 3 -#define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT 0x0004 -#define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT 0x0010 -#define IEEE80211_HT_OP_MODE_CCFS2_SHIFT 5 -#define IEEE80211_HT_OP_MODE_CCFS2_MASK 0x1fe0 - -/* for stbc_param */ -#define IEEE80211_HT_STBC_PARAM_DUAL_BEACON 0x0040 -#define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT 0x0080 -#define IEEE80211_HT_STBC_PARAM_STBC_BEACON 0x0100 -#define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT 0x0200 -#define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE 0x0400 -#define IEEE80211_HT_STBC_PARAM_PCO_PHASE 0x0800 - - -/* block-ack parameters */ -#define IEEE80211_ADDBA_PARAM_AMSDU_MASK 0x0001 -#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002 -#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C -#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0 -#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000 -#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800 - -/* - * A-MPDU buffer sizes - * According to HT size varies from 8 to 64 frames - * HE adds the ability to have up to 256 frames. - * EHT adds the ability to have up to 1K frames. - */ -#define IEEE80211_MIN_AMPDU_BUF 0x8 -#define IEEE80211_MAX_AMPDU_BUF_HT 0x40 -#define IEEE80211_MAX_AMPDU_BUF_HE 0x100 -#define IEEE80211_MAX_AMPDU_BUF_EHT 0x400 - - -/* Spatial Multiplexing Power Save Modes (for capability) */ -#define WLAN_HT_CAP_SM_PS_STATIC 0 -#define WLAN_HT_CAP_SM_PS_DYNAMIC 1 -#define WLAN_HT_CAP_SM_PS_INVALID 2 -#define WLAN_HT_CAP_SM_PS_DISABLED 3 - -/* for SM power control field lower two bits */ -#define WLAN_HT_SMPS_CONTROL_DISABLED 0 -#define WLAN_HT_SMPS_CONTROL_STATIC 1 -#define WLAN_HT_SMPS_CONTROL_DYNAMIC 3 - /** * struct ieee80211_vht_mcs_info - VHT MCS information * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams @@ -3807,18 +3561,6 @@ enum ieee80211_spectrum_mgmt_actioncode { WLAN_ACTION_SPCT_CHL_SWITCH = 4, }; -/* HT action codes */ -enum ieee80211_ht_actioncode { - WLAN_HT_ACTION_NOTIFY_CHANWIDTH = 0, - WLAN_HT_ACTION_SMPS = 1, - WLAN_HT_ACTION_PSMP = 2, - WLAN_HT_ACTION_PCO_PHASE = 3, - WLAN_HT_ACTION_CSI = 4, - WLAN_HT_ACTION_NONCOMPRESSED_BF = 5, - WLAN_HT_ACTION_COMPRESSED_BF = 6, - WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7, -}; - /* VHT action codes */ enum ieee80211_vht_actioncode { WLAN_VHT_ACTION_COMPRESSED_BF = 0, @@ -4155,19 +3897,6 @@ struct ieee80211_bss_max_idle_period_ie { u8 idle_options; } __packed; -/* BACK action code */ -enum ieee80211_back_actioncode { - WLAN_ACTION_ADDBA_REQ = 0, - WLAN_ACTION_ADDBA_RESP = 1, - WLAN_ACTION_DELBA = 2, -}; - -/* BACK (block-ack) parties */ -enum ieee80211_back_parties { - WLAN_BACK_RECIPIENT = 0, - WLAN_BACK_INITIATOR = 1, -}; - /* SA Query action */ enum ieee80211_sa_query_action { WLAN_ACTION_SA_QUERY_REQUEST = 0, @@ -5889,6 +5618,7 @@ static inline u32 ieee80211_eml_trans_timeout_in_us(u16 eml_cap) #define NAN_DEV_CAPA_NDPE_SUPPORTED 0x08 #define NAN_DEV_CAPA_S3_SUPPORTED 0x10 +#include "ieee80211-ht.h" #include "ieee80211-mesh.h" #endif /* LINUX_IEEE80211_H */ |