| Age | Commit message (Collapse) | Author |
|---|
|
destroy() will decrement the refcount on the interface, so that
it needs to be taken so early that it never undercounts.
Fixes: 7fb57a019f94e ("USB: cdc-acm: Fix potential deadlock (lockdep warning)")
Cc: stable <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+1b2449b7b5dc240d107a@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20190808142119.7998-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a VID:PID for the BroadMobi BM818 M.2 card
T: Bus=01 Lev=03 Prnt=40 Port=03 Cnt=01 Dev#= 44 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2020 ProdID=2060 Rev=00.00
S: Manufacturer=Qualcomm, Incorporated
S: Product=Qualcomm CDMA Technologies MSM
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
Signed-off-by: Bob Ham <bob.ham@puri.sm>
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: stable <stable@vger.kernel.org>
[ johan: use USB_DEVICE_INTERFACE_CLASS() ]
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
On Motorola Mapphone devices such as Droid 4 there are five USB ports
that do not use the same layout as Gobi 1K/2K/etc devices listed in
qcserial.c. So we should use qcaux.c or option.c as noted by
Dan Williams <dan.j.williams@intel.com>.
As the Motorola USB serial ports have an interrupt endpoint as shown
with lsusb -v, we should use option.c instead of qcaux.c as pointed out
by Johan Hovold <johan@kernel.org>.
The ff/ff/ff interfaces seem to always be UARTs on Motorola devices.
For the other interfaces, class 0x0a (CDC Data) should not in general
be added as they are typically part of a multi-interface function as
noted earlier by Bjørn Mork <bjorn@mork.no>.
However, looking at the Motorola mapphone kernel code, the mdm6600 0x0a
class is only used for flashing the modem firmware, and there are no
other interfaces. So I've added that too with more details below as it
works just fine.
The ttyUSB ports on Droid 4 are:
ttyUSB0 DIAG, CQDM-capable
ttyUSB1 MUX or NMEA, no response
ttyUSB2 MUX or NMEA, no response
ttyUSB3 TCMD
ttyUSB4 AT-capable
The ttyUSB0 is detected as QCDM capable by ModemManager. I think
it's only used for debugging with ModemManager --debug for sending
custom AT commands though. ModemManager already can manage data
connection using the USB QMI ports that are already handled by the
qmi_wwan.c driver.
To enable the MUX or NMEA ports, it seems that something needs to be
done additionally to enable them, maybe via the DIAG or TCMD port.
It might be just a NVRAM setting somewhere, but I have no idea what
NVRAM settings may need changing for that.
The TCMD port seems to be a Motorola custom protocol for testing
the modem and to configure it's NVRAM and seems to work just fine
based on a quick test with a minimal tcmdrw tool I wrote.
The voice modem AT-capable port seems to provide only partial
support, and no PM support compared to the TS 27.010 based UART
wired directly to the modem.
The UARTs added with this change are the same product IDs as the
Motorola Mapphone Android Linux kernel mdm6600_id_table. I don't
have any mdm9600 based devices, so I have only tested these on
mdm6600 based droid 4.
Then for the class 0x0a (CDC Data) mode, the Motorola Mapphone Android
Linux kernel driver moto_flashqsc.c just seems to change the
port->bulk_out_size to 8K from the default. And is only used for
flashing the modem firmware it seems.
I've verified that flashing the modem with signed firmware works just
fine with the option driver after manually toggling the GPIO pins, so
I've added droid 4 modem flashing mode to the option driver. I've not
added the other devices listed in moto_flashqsc.c in case they really
need different port->bulk_out_size. Those can be added as they get
tested to work for flashing the modem.
After this patch the output of /sys/kernel/debug/usb/devices has
the following for normal 22b8:2a70 mode including the related qmi_wwan
interfaces:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=22b8 ProdID=2a70 Rev= 0.00
S: Manufacturer=Motorola, Incorporated
S: Product=Flash MZ600
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=5ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=5ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=5ms
E: Ad=8a(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E: Ad=8b(I) Atr=03(Int.) MxPS= 64 Ivl=5ms
E: Ad=8c(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E: Ad=8d(I) Atr=03(Int.) MxPS= 64 Ivl=5ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=09(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
In 22b8:900e "qc_dload" mode the device shows up as:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=22b8 ProdID=900e Rev= 0.00
S: Manufacturer=Motorola, Incorporated
S: Product=Flash MZ600
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
And in 22b8:4281 "ram_downloader" mode the device shows up as:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=22b8 ProdID=4281 Rev= 0.00
S: Manufacturer=Motorola, Incorporated
S: Product=Flash MZ600
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=fc Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
Cc: Bjørn Mork <bjorn@mork.no>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Lars Melin <larsm17@gmail.com>
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo:
Intel PT:
Adrian Hunter:
- Add PEBS via Intel PT support, the kernel bits went via PeterZ.
perf record:
Alexander Shishkin:
- Add an option to take an AUX snapshot on exit.
Tan Xiaojun:
- Support aarch64 random socket_id assignment, just like was fixed for S/390.
tools:
Andy Shevchenko:
- Keep list of tools in alphabetical order on 'make -C tools help'.
perf session:
Arnaldo Carvalho de Melo:
- Avoid infinite loop when seeing invalid header.size, reported by
Vince Weaver using a perf.data fuzzer.
Documentation:
Vince Weaver:
- Clarify HEADER_SAMPLE_TOPOLOGY format in the perf.data spec.
perf config:
Arnaldo Carvalho de Melo:
- Honour $PERF_CONFIG env var to specify alternate .perfconfig.
perf test:
Arnaldo Carvalho de Melo:
- Disable ~/.perfconfig to get default output in 'perf trace' tests.
perf top:
Arnaldo Carvalho de Melo:
- Set display thread COMM to help with debugging.
- Collapse and resort evsels in a group, so that we have output
similar to 'perf report' when using event groups, i.e.
perf top -e '{cycles,instructions}'
Will have two columns, and the instructions one will work.
core:
Igor Lubashev:
- Detect if libcap development files are available so that we
can use capabilities to match the checks made by the kernel instead
of using plain (geteuid() == 0).
Intel:
Haiyan Song:
- Add Icelake V1.00 event file.
perf trace:
Leo Yan:
- Fix segmentation fault when access syscall info on arm64.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There are a few different subsystems in the kernel that depend on model
specific behaviour (perf, EDAC, power, ...). Easier for just one person
to have the task to get new model numbers included instead of having
these groups trip over each other to do it.
[ bp: s/Cpu/CPU/ and add x86@kernel.org so that it gets CCed too as
FYI. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190814234030.30817-1-tony.luck@intel.com
|
|
vmx_set_nested_state_test is trying to use the KVM_STATE_NESTED_EVMCS without
enabling enlightened VMCS first. Correct the outcome of the test, and actually
test that it succeeds after the capability is enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There are two tests already enabling eVMCS and a third is coming.
Add a function that enables the capability and tests the result.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This test is only covering various edge cases of the
KVM_SET_NESTED_STATE ioctl. Running the VM does not really
add anything.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
drm-fixes-5.3-2019-08-14:
amdgpu:
- Use kvalloc for dc_state to avoid allocation
failures in some cases.
- Fix gfx9 soft recovery
scheduler:
- Fix a race condition when destroying entities
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815024919.3434-1-alexander.deucher@amd.com
|
|
I -thought- I had fixed this entirely, but it looks like that I didn't
test this thoroughly enough as we apparently still make one big mistake
with nv50_msto_atomic_check() - we don't handle the following scenario:
* CRTC #1 has n VCPI allocated to it, is attached to connector DP-4
which is attached to encoder #1. enabled=y active=n
* CRTC #1 is changed from DP-4 to DP-5, causing:
* DP-4 crtc=#1→NULL (VCPI n→0)
* DP-5 crtc=NULL→#1
* CRTC #1 steals encoder #1 back from DP-4 and gives it to DP-5
* CRTC #1 maintains the same mode as before, just with a different
connector
* mode_changed=n connectors_changed=y
(we _SHOULD_ do VCPI 0→n here, but don't)
Once the above scenario is repeated once, we'll attempt freeing VCPI
from the connector that we didn't allocate due to the connectors
changing, but the mode staying the same. Sigh.
Since nv50_msto_atomic_check() has broken a few times now, let's rethink
things a bit to be more careful: limit both VCPI/PBN allocations to
mode_changed || connectors_changed, since neither VCPI or PBN should
ever need to change outside of routing and mode changes.
Changes since v1:
* Fix accidental reversal of clock and bpp arguments in
drm_dp_calc_pbn_mode() - William Lewis
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reported-by: Bohdan Milar <bmilar@redhat.com>
Tested-by: Bohdan Milar <bmilar@redhat.com>
Fixes: 232c9eec417a ("drm/nouveau: Use atomic VCPI helpers for MST")
References: 412e85b60531 ("drm/nouveau: Only release VCPI slots on mode changes")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <stable@vger.kernel.org> # v5.1+
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809005307.18391-1-lyude@redhat.com
|
|
There is another thread still access standard VGA I/O while loading drm driver.
Disable standard VGA I/O decode to avoid this issue.
Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1523410059-18415-1-git-send-email-yc_chen@aspeedtech.com
|
|
In blocked_fl_write(), 't' is not deallocated if bitmap_parse_user() fails,
leading to a memory leak bug. To fix this issue, free t before returning
the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Diverged from what the code does with commit 530210c7814e ("of/irq: Replace
of_irq with of_phandle_args").
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The proper way to add additional contraints to an existing json-schema
is using 'allOf' to reference the base schema. Using just '$ref' doesn't
work. Fix this for the 'st,syscfg' property.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Fix the following BUG:
[ 187.065689] BUG: kernel NULL pointer dereference, address: 000000000000001c
[ 187.065790] RIP: 0010:ufshcd_vreg_set_hpm+0x3c/0x110 [ufshcd_core]
[ 187.065938] Call Trace:
[ 187.065959] ufshcd_resume+0x72/0x290 [ufshcd_core]
[ 187.065980] ufshcd_system_resume+0x54/0x140 [ufshcd_core]
[ 187.065993] ? pci_pm_restore+0xb0/0xb0
[ 187.066005] ufshcd_pci_resume+0x15/0x20 [ufshcd_pci]
[ 187.066017] pci_pm_thaw+0x4c/0x90
[ 187.066030] dpm_run_callback+0x5b/0x150
[ 187.066043] device_resume+0x11b/0x220
Voltage regulators are optional, so functions must check they exist
before dereferencing.
Note this issue is hidden if CONFIG_REGULATORS is not set, because the
offending code is optimised away.
Notes for stable:
The issue first appears in commit 57d104c153d3 ("ufs: add UFS power
management support") but is inadvertently fixed in commit 60f0187031c0
("scsi: ufs: disable vccq if it's not needed by UFS device") which in
turn was reverted by commit 730679817d83 ("Revert "scsi: ufs: disable vccq
if it's not needed by UFS device""). So fix applies v3.18 to v4.5 and
v5.1+
Fixes: 57d104c153d3 ("ufs: add UFS power management support")
Fixes: 730679817d83 ("Revert "scsi: ufs: disable vccq if it's not needed by UFS device"")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In tcmu_handle_completion() function, the variable called read_len is
always initialized with a value taken from se_cmd structure. If this
function is called to complete an expired (timed out) out command, the
session command pointed by se_cmd is likely to be already deallocated by
the target core at that moment. As the result, this access triggers a
use-after-free warning from KASAN.
This patch fixes the code not to touch se_cmd when completing timed out
TCMU commands. It also resets the pointer to se_cmd at the time when the
TCMU_CMD_BIT_EXPIRED flag is set because it is going to become invalid
after calling target_complete_cmd() later in the same function,
tcmu_check_expired_cmd().
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If HBA initialization fails unexpectedly (exiting via probe_failed:), we
may fail to free vha->gnl.l. So that we don't attempt to double free, set
this pointer to NULL after a free and check for NULL at probe_failed: so we
know whether or not to call dma_free_coherent.
Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This driver requires imported PRIME buffers to appear contiguously in
its IO address space. Make sure this is the case by setting the maximum
DMA segment size to a more suitable value than the default 64KB.
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
|
|
PRIME buffers should be imported using the DMA device. To this end, use
a custom import function that mimics drm_gem_prime_import_dev(), but
passes the correct device.
Fixes: 119f5173628aa ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: CK Hu <ck.hu@mediatek.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo A. R. Silva:
"Fix sh mainline builds:
- Fix fall-through warning in sh.
- Fix missing break bug in sh (this is a 10-year-old bug)
Currently, mainline builds for sh are broken. These patches fix that"
* tag 'Wimplicit-fallthrough-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
sh: kernel: hw_breakpoint: Fix missing break in switch statement
sh: kernel: disassemble: Mark expected switch fall-throughs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull afs fixes from David Howells:
- Fix the CB.ProbeUuid handler to generate its reply correctly.
- Fix a mix up in indices when parsing a Volume Location entry record.
- Fix a potential NULL-pointer deref when cleaning up a read request.
- Fix the expected data version of the destination directory in
afs_rename().
- Fix afs_d_revalidate() to only update d_fsdata if it's not the same
as the directory data version to reduce the likelihood of overwriting
the result of a competing operation. (d_fsdata carries the directory
DV or the least-significant word thereof).
- Fix the tracking of the data-version on a directory and make sure
that dentry objects get properly initialised, updated and
revalidated.
Also fix rename to update d_fsdata to match the new directory's DV if
the dentry gets moved over and unhash the dentry to stop
afs_d_revalidate() from interfering.
* tag 'afs-fixes-20190814' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix missing dentry data version updating
afs: Only update d_fsdata if different in afs_d_revalidate()
afs: Fix off-by-one in afs_rename() expected data version calculation
fs: afs: Fix a possible null-pointer dereference in afs_put_read()
afs: Fix loop index mixup in afs_deliver_vl_get_entry_by_name_u()
afs: Fix the CB.ProbeUuid service handler to reply correctly
|
|
The spsc_queue_peek function is accessing queue->head which belongs to
the consumer thread and shouldn't be accessed by the producer
This is fixing a rare race condition when destroying entities.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Monk.liu@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Make the __fstate_clean() function correctly set the
state of sstatus.FS in pt_regs to SR_FS_CLEAN.
Fixes: 7db91e57a0acd ("RISC-V: Task implementation")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[paul.walmsley@sifive.com: expanded "Fixes" commit ID]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
The following two reasons cause FP registers are sometimes not
initialized before starting the user program.
1. Currently, the FP context is initialized in flush_thread() function
and we expect these initial values to be restored to FP register when
doing FP context switch. However, the FP context switch only occurs in
switch_to function. Hence, if this process does not be scheduled out
and scheduled in before entering the user space, the FP registers
have no chance to initialize.
2. In flush_thread(), the state of reg->sstatus.FS inherits from the
parent. Hence, the state of reg->sstatus.FS may be dirty. If this
process is scheduled out during flush_thread() and initializing the
FP register, the fstate_save() in switch_to will corrupt the FP context
which has been initialized until flush_thread().
To solve the 1st case, the initialization of the FP register will be
completed in start_thread(). It makes sure all FP registers are initialized
before starting the user program. For the 2nd case, the state of
reg->sstatus.FS in start_thread will be set to SR_FS_OFF to prevent this
process from corrupting FP context in doing context save. The FP state is
set to SR_FS_INITIAL in start_trhead().
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 7db91e57a0acd ("RISC-V: Task implementation")
Cc: stable@vger.kernel.org
[paul.walmsley@sifive.com: fixed brace alignment issue reported by
checkpatch]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Pull rdma fixes from Doug Ledford:
"Fairly small pull request for -rc3. I'm out of town the rest of this
week, so I made sure to clean out as much as possible from patchworks
in enough time for 0-day to chew through it (Yay! for 0-day being back
online! :-)). Jason might send through any emergency stuff that could
pop up, otherwise I'm back next week.
The only real thing of note is the siw ABI change. Since we just
merged siw *this* release, there are no prior kernel releases to
maintain kernel ABI with. I told Bernard that if there is anything
else about the siw ABI he thinks he might want to change before it
goes set in stone, he should get it in ASAP. The siw module was around
for several years outside the kernel tree, and it had to be revamped
considerably for inclusion upstream, so we are making no attempts to
be backward compatible with the out of tree version. Once 5.3 is
actually released, we will have our baseline ABI to maintain.
Summary:
- Fix a memory registration release flow issue that was causing a
WARN_ON (mlx5)
- If the counters for a port aren't allocated, then we can't do
operations on the non-existent counters (core)
- Check the right variable for error code result (mlx5)
- Fix a use after free issue (mlx5)
- Fix an off by one memory leak (siw)
- Actually return an error code on error (core)
- Allow siw to be built on 32bit arches (siw, ABI change, but OK
since siw was just merged this merge window and there is no prior
released kernel to maintain compatibility with and we also updated
the rdma-core user space package to match)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/siw: Change CQ flags from 64->32 bits
RDMA/core: Fix error code in stat_get_doit_qp()
RDMA/siw: Fix a memory leak in siw_init_cpulist()
IB/mlx5: Fix use-after-free error while accessing ev_file pointer
IB/mlx5: Check the correct variable in error handling code
RDMA/counter: Prevent QP counter binding if counters unsupported
IB/mlx5: Fix implicit MR release flow
|
|
The `uac_mixer_unit_descriptor` shown as below is read from the
device side. In `parse_audio_mixer_unit`, `baSourceID` field is
accessed from index 0 to `bNrInPins` - 1, the current implementation
assumes that descriptor is always valid (the length of descriptor
is no shorter than 5 + `bNrInPins`). If a descriptor read from
the device side is invalid, it may trigger out-of-bound memory
access.
```
struct uac_mixer_unit_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bDescriptorSubtype;
__u8 bUnitID;
__u8 bNrInPins;
__u8 baSourceID[];
}
```
This patch fixes the bug by add a sanity check on the length of
the descriptor.
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull dma-mapping fixes from Christoph Hellwig:
- fix the handling of the bus_dma_mask in dma_get_required_mask, which
caused a regression in this merge window (Lucas Stach)
- fix a regression in the handling of DMA_ATTR_NO_KERNEL_MAPPING (me)
- fix dma_mmap_coherent to not cause page attribute mismatches on
coherent architectures like x86 (me)
* tag 'dma-mapping-5.3-4' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix page attributes for dma_mmap_*
dma-direct: don't truncate dma_required_mask to bus addressing capabilities
dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- A couple more fixes for the Intel VT-d driver for bugs introduced
during the recent conversion of this driver to use IOMMU core default
domains.
- Fix for common dma-iommu code to make sure MSI mappings happen in the
correct domain for a device.
- Fix a corner case in the handling of sg-lists in dma-iommu code that
might cause dma_length to be truncated.
- Mark a switch as fall-through in arm-smmu code.
* tag 'iommu-fixes-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix possible use-after-free of private domain
iommu/vt-d: Detach domain before using a private one
iommu/dma: Handle SG length overflow better
iommu/vt-d: Correctly check format of page table in debugfs
iommu/vt-d: Detach domain when move device out of group
iommu/arm-smmu: Mark expected switch fall-through
iommu/dma: Handle MSI mappings separately
|
|
Merge misc VM fixes from Andrew Morton:
"A bunch of hotfixes, all affecting mm/.
The two-patch series from Andrea may be controversial. This restores
patches which were reverted in Dec 2018 due to a regression report [*].
After extensive discussion it is evident that the problems which these
patches solved were significantly more serious than the problems they
introduced. I am told that major distros are already carrying these
two patches for this reason"
[*] See
https://lore.kernel.org/lkml/alpine.DEB.2.21.1812061343240.144733@chino.kir.corp.google.com/
https://lore.kernel.org/lkml/alpine.DEB.2.21.1812031545560.161134@chino.kir.corp.google.com/
for the google-specific issues brought up by David Rijentes. And as
Andrew says:
"I'm unaware of anyone else who will be adversely affected by this,
and google already carries over a thousand kernel patches - another
won't kill them.
There has been sporadic discussion about fixing these things for
real but it's clear that nobody apart from David is particularly
motivated"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
hugetlbfs: fix hugetlb page migration/fault race causing SIGBUS
mm, vmscan: do not special-case slab reclaim when watermarks are boosted
Revert "mm, thp: restore node-local hugepage allocations"
Revert "Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask""
include/asm-generic/5level-fixup.h: fix variable 'p4d' set but not used
seq_file: fix problem when seeking mid-record
mm: workingset: fix vmstat counters for shadow nodes
mm/usercopy: use memory range to be accessed for wraparound check
mm: kmemleak: disable early logging in case of error
mm/vmalloc.c: fix percpu free VM area search criteria
mm/memcontrol.c: fix use after free in mem_cgroup_iter()
mm/z3fold.c: fix z3fold_destroy_pool() race condition
mm/z3fold.c: fix z3fold_destroy_pool() ordering
mm: mempolicy: handle vma with unmovable pages mapped correctly in mbind
mm: mempolicy: make the behavior consistent when MPOL_MF_MOVE* and MPOL_MF_STRICT were specified
mm/hmm: fix bad subpage pointer in try_to_unmap_one
mm/hmm: fix ZONE_DEVICE anon page mapping reuse
mm: document zone device struct page field usage
|
|
Checking bypass_reg is incorrect for calculating the cnt_clk rates.
Instead we should be checking that there is a proper hardware register
that holds the clock divider.
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lkml.kernel.org/r/20190814153014.12962-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
new_entry is reassigned a new value next line. So
it's redundant and remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is probably overdue---KVM x86 has quite a few contributors that
usually review each other's patches, which is really helpful to me.
Formalize this by listing them as reviewers. I am including people
with various expertise:
- Joerg for SVM (with designated reviewers, it makes more sense to have
him in the main KVM/x86 stanza)
- Sean for MMU and VMX
- Jim for VMX
- Vitaly for Hyper-V and possibly SVM
- Wanpeng for LAPIC and paravirtualization.
Please ack if you are okay with this arrangement, otherwise speak up.
In other news, Radim is going to leave Red Hat soon. However, he has
not been very much involved in upstream KVM development for some time,
and in the immediate future he is still going to help maintain kvm/queue
while I am on vacation. Since not much is going to change, I will let
him decide whether he wants to keep the maintainer role after he leaves.
Acked-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wanpeng Li <wanpengli@tencent.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM/s390 does not have a list of its own, and linux-s390 is in the
loop anyway thanks to the generic arch/s390 match. So use the generic
KVM list for s390 patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
recalculate_apic_map does not santize ldr and it's possible that
multiple bits are set. In that case, a previous valid entry
can potentially be overwritten by an invalid one.
This condition is hit when booting a 32 bit, >8 CPU, RHEL6 guest and then
triggering a crash to boot a kdump kernel. This is the sequence of
events:
1. Linux boots in bigsmp mode and enables PhysFlat, however, it still
writes to the LDR which probably will never be used.
2. However, when booting into kdump, the stale LDR values remain as
they are not cleared by the guest and there isn't a apic reset.
3. kdump boots with 1 cpu, and uses Logical Destination Mode but the
logical map has been overwritten and points to an inactive vcpu.
Signed-off-by: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We need to do it only when fallbacking from GTK to the TUI.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dda0acxqef1k72n9z4myjbjt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Same as in the commit 01766229533f ("perf record: Support s390 random
socket_id assignment"), aarch64 also have this problem.
Without this fix:
[root@localhost perf]# ./perf report --header -I -v
...
socket_id number is too big.You may need to upgrade the perf tool.
# ========
# captured on : Thu Aug 1 22:58:38 2019
# header version : 1
...
# Core ID and Socket ID information is not available
...
With this fix:
[root@localhost perf]# ./perf report --header -I -v
...
cpumask list: 0-31
cpumask list: 32-63
cpumask list: 64-95
cpumask list: 96-127
# ========
# captured on : Thu Aug 1 22:58:38 2019
# header version : 1
...
# CPU 0: Core ID 0, Socket ID 36
# CPU 1: Core ID 1, Socket ID 36
...
# CPU 126: Core ID 126, Socket ID 8442
# CPU 127: Core ID 127, Socket ID 8442
...
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Link: http://lkml.kernel.org/r/1564717737-21602-1-git-send-email-tanxiaojun@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf.data file format documentation for HEADER_SAMPLE_TOPOLOGY
specifies the layout in a confusing manner that doesn't match the rest
of the document. This patch attempts to describe things consistent with
the rest of the file.
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1908011425240.14303@macbook-air
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When `make help` is executed it lists the possible tools to build,
though couple of entries is kept unordered. Fix it here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-0ke3p64ksa0hnbueh52n3v3q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
older kernels
Just like we do with the 'write_backwards' feature:
Before:
# perf record -e {intel_pt/branch=0/,cycles/aux-output/ppp} uname
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cycles/aux-output/ppp).
/bin/dmesg | grep -i perf may provide additional information.
#
After:
# perf record -e {intel_pt/branch=0/,cycles/aux-output/ppp} uname
Error:
The 'aux_output' feature is not supported, update the kernel.
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-wgjsjroe1e150c0metgwmqwd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Document how to select PEBS via Intel PT and how to display synthesized
PEBS samples.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-8-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
[ Update the example to use a group with intel_pt// as the group leader, as per Alex comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Expose the aux_output attribute flag to the user to configure, by adding a
config term 'aux-output'. For events that support it, selection of
'aux-output' causes the generation of AUX records instead of event records.
This requires that an AUX area event is also provided.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-7-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Process synth_opts.other_events and attr.aux_output to set up for
synthesizing PEBs via Intel PT events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-6-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
[ Fixed up libbperf clashes, i.e. some places using perf_evsel (now in libperf)
need to use instead 'evsel' (a tools/perf only abstraction) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add itrace option 'o' to synthesize events recorded in the AUX area due
to the use of perf record's aux-output config term.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-5-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add aux_output attribute flag to match the kernel's perf_event.h file.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-4-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It is sometimes useful to generate a snapshot when perf record exits;
I've been using a wrapper script around the workload that would do a
killall -USR2 perf when the workload exits.
This patch makes it easier and also works when perf record is attached
to a pre-existing task. A new snapshot option 'e' can be specified in
-S to enable this behavior:
root@elsewhere:~# perf record -e intel_pt// -Se sleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.085 MB perf.data ]
Co-developed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806144101.62892-1-alexander.shishkin@linux.intel.com
[ Fixed up !HAVE_AUXTRACE_SUPPORT build in builtin-record.c, adding 2 missing __maybe_unused ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If we link against libcap, then we can state that CAP_SYS_ADMIN is
needed, if not, fallback to telling the user it needs to be root, as was
before linking against libcap.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/n/tip-hhnbjdo8r67054of9zm2kxtl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The kernel requires CAP_SYS_ADMIN instead of euid==0 to mount debugfs
for ftrace. Make perf do the same.
Signed-off-by: Igor Lubashev <ilubashe@akamai.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/bd8763b72ed4d58d0b42d44fbc7eb474d32e53a3.1565188228.git.ilubashe@akamai.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some of the systems I test don't have that define, provide it
conditionally since we'll use it in the kptr_restrict checks in the next
patch.
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/n/tip-dcize2v6jjab7tds5ngz97dk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We need to add these so that we test building without all selectable
features.
Acked-by: Igor Lubashev <ilubashe@akamai.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/n/tip-eknnvp22elznj0cl5a39hc4v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Don't fall through to print error message when receive sleep indication
in HCI_IBS_RX_ASLEEP state, this is allowed behavior.
Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
