| Age | Commit message (Collapse) | Author |
|---|
|
Since 'commit 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")' the
irq request isn't the last devm_* allocation. Without a deeper look at
the irq and testing this isn't a good solution. Since this driver relies
on the devm mechanism, requesting a interrupt should be the last thing
to avoid memory corruptions during unbinding.
'Commit 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")' fixed the
order for the interrupt-controller use case only. The
mcp23s08_irq_setup() must be split into two to fix it for the
interrupt-controller use case and to register the irq at last. So the
irq will be freed first during unbind.
Cc: stable@vger.kernel.org
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Dmitry Mastykin <mastichi@gmail.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Fixes: 82039d244f87 ("pinctrl: mcp23s08: add pinconf support")
Fixes: 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Tested-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
gpiochip_set_cascaded_irqchip() is passed 'parent_irq' as an argument
and then the address of that argument is assigned to the gpio chips
gpio_irq_chip 'parents' pointer shortly thereafter. This can't ever
work, because we've just assigned some stack address to a pointer that
we plan to dereference later in gpiochip_irq_map(). I ran into this
issue with the KASAN report below when gpiochip_irq_map() tried to setup
the parent irq with a total junk pointer for the 'parents' array.
BUG: KASAN: stack-out-of-bounds in gpiochip_irq_map+0x228/0x248
Read of size 4 at addr ffffffc0dde472e0 by task swapper/0/1
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 4.14.72 #34
Call trace:
[<ffffff9008093638>] dump_backtrace+0x0/0x718
[<ffffff9008093da4>] show_stack+0x20/0x2c
[<ffffff90096b9224>] __dump_stack+0x20/0x28
[<ffffff90096b91c8>] dump_stack+0x80/0xbc
[<ffffff900845a350>] print_address_description+0x70/0x238
[<ffffff900845a8e4>] kasan_report+0x1cc/0x260
[<ffffff900845aa14>] __asan_report_load4_noabort+0x2c/0x38
[<ffffff900897e098>] gpiochip_irq_map+0x228/0x248
[<ffffff900820cc08>] irq_domain_associate+0x114/0x2ec
[<ffffff900820d13c>] irq_create_mapping+0x120/0x234
[<ffffff900820da78>] irq_create_fwspec_mapping+0x4c8/0x88c
[<ffffff900820e2d8>] irq_create_of_mapping+0x180/0x210
[<ffffff900917114c>] of_irq_get+0x138/0x198
[<ffffff9008dc70ac>] spi_drv_probe+0x94/0x178
[<ffffff9008ca5168>] driver_probe_device+0x51c/0x824
[<ffffff9008ca6538>] __device_attach_driver+0x148/0x20c
[<ffffff9008ca14cc>] bus_for_each_drv+0x120/0x188
[<ffffff9008ca570c>] __device_attach+0x19c/0x2dc
[<ffffff9008ca586c>] device_initial_probe+0x20/0x2c
[<ffffff9008ca18bc>] bus_probe_device+0x80/0x154
[<ffffff9008c9b9b4>] device_add+0x9b8/0xbdc
[<ffffff9008dc7640>] spi_add_device+0x1b8/0x380
[<ffffff9008dcbaf0>] spi_register_controller+0x111c/0x1378
[<ffffff9008dd6b10>] spi_geni_probe+0x4dc/0x6f8
[<ffffff9008cab058>] platform_drv_probe+0xdc/0x130
[<ffffff9008ca5168>] driver_probe_device+0x51c/0x824
[<ffffff9008ca59cc>] __driver_attach+0x100/0x194
[<ffffff9008ca0ea8>] bus_for_each_dev+0x104/0x16c
[<ffffff9008ca58c0>] driver_attach+0x48/0x54
[<ffffff9008ca1edc>] bus_add_driver+0x274/0x498
[<ffffff9008ca8448>] driver_register+0x1ac/0x230
[<ffffff9008caaf6c>] __platform_driver_register+0xcc/0xdc
[<ffffff9009c4b33c>] spi_geni_driver_init+0x1c/0x24
[<ffffff9008084cb8>] do_one_initcall+0x240/0x3dc
[<ffffff9009c017d0>] kernel_init_freeable+0x378/0x468
[<ffffff90096e8240>] kernel_init+0x14/0x110
[<ffffff9008086fcc>] ret_from_fork+0x10/0x18
The buggy address belongs to the page:
page:ffffffbf037791c0 count:0 mapcount:0 mapping: (null) index:0x0
flags: 0x4000000000000000()
raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff
raw: ffffffbf037791e0 ffffffbf037791e0 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffffc0dde47180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0dde47200: f1 f1 f1 f1 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f2 f2
>ffffffc0dde47280: f2 f2 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 f3
^
ffffffc0dde47300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0dde47380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Let's leave around one unsigned int in the gpio_irq_chip struct for the
single parent irq case and repoint the 'parents' array at it. This way
code is left mostly intact to setup parents and we waste an extra few
bytes per structure of which there should be only a handful in a system.
Cc: Evan Green <evgreen@chromium.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Fixes: e0d897289813 ("gpio: Implement tighter IRQ chip integration")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
When powering down a SDIO connected card during suspend, make sure to call
into the generic lbs_suspend() function before pulling the plug. This will
make sure the card is successfully deregistered from the system to avoid
communication to the card starving out.
Fixes: 7444a8092906 ("libertas: fix suspend and resume for SDIO connected cards")
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
On systems with OF_IMAP_OLDWORLD_MAC set in of_irq_workarounds, the
devicetree interrupt parsing code is different, causing unit tests of
devicetree interrupt nodes to fail. Due to a bug in unittest code, which
tries to dereference an uninitialized pointer, this results in a crash.
OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
Unable to handle kernel paging request for data at address 0x00bc616e
Faulting instruction address: 0xc08e9468
Oops: Kernel access of bad area, sig: 11 [#1]
BE PREEMPT PowerMac
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.72-rc1-yocto-standard+ #1
task: cf8e0000 task.stack: cf8da000
NIP: c08e9468 LR: c08ea5bc CTR: c08ea5ac
REGS: cf8dbb50 TRAP: 0300 Not tainted (4.14.72-rc1-yocto-standard+)
MSR: 00001032 <ME,IR,DR,RI> CR: 82004044 XER: 00000000
DAR: 00bc616e DSISR: 40000000
GPR00: c08ea5bc cf8dbc00 cf8e0000 c13ca517 c13ca517 c13ca8a0 00000066 00000002
GPR08: 00000063 00bc614e c0b05865 000affff 82004048 00000000 c00047f0 00000000
GPR16: c0a80000 c0a9cc34 c13ca517 c0ad1134 05ffffff 000affff c0b05860 c0abeef8
GPR24: cecec278 cecec278 c0a8c4d0 c0a885e0 c13ca8a0 05ffffff c13ca8a0 c13ca517
NIP [c08e9468] device_node_gen_full_name+0x30/0x15c
LR [c08ea5bc] device_node_string+0x190/0x3c8
Call Trace:
[cf8dbc00] [c007f670] trace_hardirqs_on_caller+0x118/0x1fc (unreliable)
[cf8dbc40] [c08ea5bc] device_node_string+0x190/0x3c8
[cf8dbcb0] [c08eb794] pointer+0x25c/0x4d0
[cf8dbd00] [c08ebcbc] vsnprintf+0x2b4/0x5ec
[cf8dbd60] [c08ec00c] vscnprintf+0x18/0x48
[cf8dbd70] [c008e268] vprintk_store+0x4c/0x22c
[cf8dbda0] [c008ecac] vprintk_emit+0x94/0x130
[cf8dbdd0] [c008ff54] printk+0x5c/0x6c
[cf8dbe10] [c0b8ddd4] of_unittest+0x2220/0x26f8
[cf8dbea0] [c0004434] do_one_initcall+0x4c/0x184
[cf8dbf00] [c0b4534c] kernel_init_freeable+0x13c/0x1d8
[cf8dbf30] [c0004814] kernel_init+0x24/0x118
[cf8dbf40] [c0013398] ret_from_kernel_thread+0x5c/0x64
The problem was observed when running a qemu test for the g3beige machine
with devicetree unittests enabled.
Disable interrupt node tests on affected systems to avoid both false
unittest failures and the crash.
With this patch in place, unittest on the affected system passes with
the following message.
dt-test ### end of unittest - 144 passed, 0 failed
Fixes: 53a42093d96ef ("of: Add device tree selftests")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform
Benson writes:
"chrome-platform fix for v4.19-rc8
This contains a fix to 57e94c8b974d ("mfd: cros-ec: Increase maximum
mkbp event size"), which caused cros_ec based chromebooks to truncate
an entire column of their built-in keyboard."
* tag 'tag-chrome-platform-fixes-for-v4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
mfd: cros-ec: copy the whole event in get_next_event_xfer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Dennis writes:
"percpu fixes for-4.19-rc8
The new percpu allocator introduced in 4.14 had a missing free for
the percpu metadata. This caused a memory leak when percpu memory is
being churned resulting in the allocation and deallocation of percpu
memory chunks"
* 'for-4.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: stop leaking bitmap metadata blocks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Andreas writes:
"gfs2 4.19 fix:
This fixes a regression introduced in commit 64bc06bb32ee "gfs2:
iomap buffered write support""
* tag 'gfs2-4.19.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix iomap buffered write support for journaled files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Martin writes:
"s390 fixes for 4.19-rc8
Four more patches for 4.19:
- Fix resume after suspend-to-disk if resume-CPU != suspend-CPU
- Fix vfio-ccw check for pinned pages
- Two patches to avoid a usercopy-whitelist warning in vfio-ccw"
* tag 's390-4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: Fix how vfio-ccw checks pinned pages
s390/cio: Refactor alloc of ccw_io_region
s390/cio: Convert ccw_io_region to pointer
s390/hibernate: fix error handling when suspend cpu != resume cpu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Paul writes:
"A few MIPS fixes for 4.19:
- Avoid suboptimal placement of our VDSO when using the legacy mmap
layout, which can prevent statically linked programs that were able
to allocate large amounts of memory using the brk syscall prior to
the introduction of our VDSO from functioning correctly.
- Fix up CONFIG_CMDLINE handling for platforms which ought to ignore
DT arguments but have incorrectly used them & lost other arguments
since v3.16.
- Fix a path in MAINTAINERS to use valid wildcards.
- Fixup a regression from v4.17 in memset() for systems using
CPU_DADDI_WORKAROUNDS."
* tag 'mips_fixes_4.19_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: memset: Fix CPU_DADDI_WORKAROUNDS `small_fixup' regression
MAINTAINERS: MIPS/LOONGSON2 ARCHITECTURE - Use the normal wildcard style
MIPS: Fix CONFIG_CMDLINE handling
MIPS: VDSO: Always map near top of user memory
|
|
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Use __u32 instead u32 in libbpf.c and also use
uapi perf_event.h instead of tools/perf/perf-sys.h.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Jesper Dangaard Brouer says:
====================
While implementing PoC building blocks for eBPF code XDP+TC that can
manipulate VLANs headers, I discovered a bug in generic-XDP.
The fix should be backported to stable kernels. Even-though
generic-XDP was introduced in v4.12, I think the bug is not exposed
until v4.14 in the mentined fixes commit.
====================
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This XDP selftest also contain a small TC-bpf component. It provoke
the generic-XDP bug fixed in previous commit.
The selftest itself shows how to do VLAN manipulation from XDP and TC.
The test demonstrate how XDP ingress can remove a VLAN tag, and how TC
egress can add back a VLAN tag.
This use-case originates from a production need by ISP (kviknet.dk),
who gets DSL-lines terminated as VLAN Q-in-Q tagged packets, and want
to avoid having an net_device for every end-customer on the box doing
the L2 to L3 termination.
The test-setup is done via a veth-pair and creating two network
namespaces (ns1 and ns2). The 'ns1' simulate the ISP network that are
loading the BPF-progs stripping and adding VLAN IDs. The 'ns2'
simulate the DSL-customer that are using VLAN tagged packets.
Running the script with --interactive, will simply not call the
cleanup function. This gives the effect of creating a testlab, that
the users can inspect and play with. The --verbose option will simply
request that the shell will print input lines as they are read, this
include comments, which in effect make the comments visible docs.
Reported-by: Yoel Caspersen <yoel@kviknet.dk>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The helper bpf_skb_vlan_push is needed by next patch, and the helper
bpf_skb_vlan_pop is added for completeness, regarding VLAN helpers.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
XDP can modify (and resize) the Ethernet header in the packet.
There is a bug in generic-XDP, because skb->protocol and skb->pkt_type
are setup before reaching (netif_receive_)generic_xdp.
This bug was hit when XDP were popping VLAN headers (changing
eth->h_proto), as skb->protocol still contains VLAN-indication
(ETH_P_8021Q) causing invocation of skb_vlan_untag(skb), which corrupt
the packet (basically popping the VLAN again).
This patch catch if XDP changed eth header in such a way, that SKB
fields needs to be updated.
V2: on request from Song Liu, use ETH_HLEN instead of mac_len,
in __skb_push() as eth_type_trans() use ETH_HLEN in paired skb_pull_inline().
Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Prashant Bhole says:
====================
Currently when map a lookup fails, user space API can not make any
distinction whether given key was not found or lookup is not supported
by particular map.
In this series we modify return value of maps which do not support
lookup. Lookup on such map implementation will return -EOPNOTSUPP.
bpf() syscall with BPF_MAP_LOOKUP_ELEM command will set EOPNOTSUPP
errno. We also handle this error in bpftool to print appropriate
message.
Patch 1: adds handling of BPF_MAP_LOOKUP ELEM command of bpf syscall
such that errno will set to EOPNOTSUPP when map doesn't support lookup
Patch 2: Modifies the return value of map_lookup_elem() to EOPNOTSUPP
for maps which do not support lookup
Patch 3: Splits do_dump() in bpftool/map.c. Element printing code is
moved out into new function dump_map_elem(). This was done in order to
reduce deep indentation and accomodate further changes.
Patch 4: Changes in bpftool to print strerror() message when lookup
error is occured. This will result in appropriate message like
"Operation not supported" when map doesn't support lookup.
Patch 5: test_verifier: change fixup map naming convention as
suggested by Alexei
Patch 6: Added verifier tests to check whether verifier rejects call
to bpf_map_lookup_elem from bpf program. For all map types those
do not support map lookup.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
map_lookup_elem isn't supported by certain map types like:
- BPF_MAP_TYPE_PROG_ARRAY
- BPF_MAP_TYPE_STACK_TRACE
- BPF_MAP_TYPE_XSKMAP
- BPF_MAP_TYPE_SOCKMAP/BPF_MAP_TYPE_SOCKHASH
Let's add verfier tests to check whether verifier prevents
bpf_map_lookup_elem call on above programs from bpf program.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently fixup map are named like fixup_map1, fixup_map2, and so on.
As suggested by Alexei let's change change map names such that we can
identify map type by looking at the name.
This patch is basically a find and replace change:
fixup_map1 -> fixup_map_hash_8b
fixup_map2 -> fixup_map_hash_48b
fixup_map3 -> fixup_map_hash_16b
fixup_map4 -> fixup_map_array_48b
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Since map lookup error can be ENOENT or EOPNOTSUPP, let's print
strerror() as error message in normal and JSON output.
This patch adds helper function print_entry_error() to print
entry from lookup error occurs
Example: Following example dumps a map which does not support lookup.
Output before:
root# bpftool map -jp dump id 40
[
"key": ["0x0a","0x00","0x00","0x00"
],
"value": {
"error": "can\'t lookup element"
},
"key": ["0x0b","0x00","0x00","0x00"
],
"value": {
"error": "can\'t lookup element"
}
]
root# bpftool map dump id 40
can't lookup element with key:
0a 00 00 00
can't lookup element with key:
0b 00 00 00
Found 0 elements
Output after changes:
root# bpftool map dump -jp id 45
[
"key": ["0x0a","0x00","0x00","0x00"
],
"value": {
"error": "Operation not supported"
},
"key": ["0x0b","0x00","0x00","0x00"
],
"value": {
"error": "Operation not supported"
}
]
root# bpftool map dump id 45
key:
0a 00 00 00
value:
Operation not supported
key:
0b 00 00 00
value:
Operation not supported
Found 0 elements
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
do_dump() function in bpftool/map.c has deep indentations. In order
to reduce deep indent, let's move element printing code out of
do_dump() into dump_map_elem() function.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Return ERR_PTR(-EOPNOTSUPP) from map_lookup_elem() methods of below
map types:
- BPF_MAP_TYPE_PROG_ARRAY
- BPF_MAP_TYPE_STACK_TRACE
- BPF_MAP_TYPE_XSKMAP
- BPF_MAP_TYPE_SOCKMAP/BPF_MAP_TYPE_SOCKHASH
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The error value returned by map_lookup_elem doesn't differentiate
whether lookup was failed because of invalid key or lookup is not
supported.
Lets add handling for -EOPNOTSUPP return value of map_lookup_elem()
method of map, with expectation from map's implementation that it
should return -EOPNOTSUPP if lookup is not supported.
The errno for bpf syscall for BPF_MAP_LOOKUP_ELEM command will be set
to EOPNOTSUPP if map lookup is not supported.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In btf_parse_hdr(), the length of the btf data header is firstly copied
from the user space to 'hdr_len' and checked to see whether it is larger
than 'btf_data_size'. If yes, an error code EINVAL is returned. Otherwise,
the whole header is copied again from the user space to 'btf->hdr'.
However, after the second copy, there is no check between
'btf->hdr->hdr_len' and 'hdr_len' to confirm that the two copies get the
same value. Given that the btf data is in the user space, a malicious user
can race to change the data between the two copies. By doing so, the user
can provide malicious data to the kernel and cause undefined behavior.
This patch adds a necessary check after the second copy, to make sure
'btf->hdr->hdr_len' has the same value as 'hdr_len'. Otherwise, an error
code EINVAL will be returned.
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit 57e94c8b974db2d83c60e1139c89a70806abbea0 caused cros-ec keyboard events
be truncated on many chromebooks so that Left and Right keys on Column 12 were
always 0. Use ret as memcpy len to fix this.
The old code was using ec_dev->event_size, which is the event payload/data size
excluding event_type header, for the length of the memcpy operation. Use ret
as memcpy length to avoid the off by one and copy the whole msg->data.
Fixes: 57e94c8b974d ("mfd: cros-ec: Increase maximum mkbp event size")
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Karlson <jekarlson@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently _PAGE_DEVMAP bit is not preserved in mprotect(2) calls. As a
result we will see warnings such as:
BUG: Bad page map in process JobWrk0013 pte:800001803875ea25 pmd:7624381067
addr:00007f0930720000 vm_flags:280000f9 anon_vma: (null) mapping:ffff97f2384056f0 index:0
file:457-000000fe00000030-00000009-000000ca-00000001_2001.fileblock fault:xfs_filemap_fault [xfs] mmap:xfs_file_mmap [xfs] readpage: (null)
CPU: 3 PID: 15848 Comm: JobWrk0013 Tainted: G W 4.12.14-2.g7573215-default #1 SLE12-SP4 (unreleased)
Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018
Call Trace:
dump_stack+0x5a/0x75
print_bad_pte+0x217/0x2c0
? enqueue_task_fair+0x76/0x9f0
_vm_normal_page+0xe5/0x100
zap_pte_range+0x148/0x740
unmap_page_range+0x39a/0x4b0
unmap_vmas+0x42/0x90
unmap_region+0x99/0xf0
? vma_gap_callbacks_rotate+0x1a/0x20
do_munmap+0x255/0x3a0
vm_munmap+0x54/0x80
SyS_munmap+0x1d/0x30
do_syscall_64+0x74/0x150
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
...
when mprotect(2) gets used on DAX mappings. Also there is a wide variety
of other failures that can result from the missing _PAGE_DEVMAP flag
when the area gets used by get_user_pages() later.
Fix the problem by including _PAGE_DEVMAP in a set of flags that get
preserved by mprotect(2).
Fixes: 69660fd797c3 ("x86, mm: introduce _PAGE_DEVMAP")
Fixes: ebd31197931d ("powerpc/mm: Add devmap support for ppc64")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
If dm-linear or dm-flakey are layered on top of a partition of a zoned
block device, remapping of the start sector and write pointer position
of the zones reported by a report zones BIO must be modified to account
for the target table entry mapping (start offset within the device and
entry mapping with the dm device). If the target's backing device is a
partition of a whole disk, the start sector on the physical device of
the partition must also be accounted for when modifying the zone
information. However, dm_remap_zone_report() was not considering this
last case, resulting in incorrect zone information remapping with
targets using disk partitions.
Fix this by calculating the target backing device start sector using
the position of the completed report zones BIO and the unchanged
position and size of the original report zone BIO. With this value
calculated, the start sector and write pointer position of the target
zones can be correctly remapped.
Fixes: 10999307c14e ("dm: introduce dm_remap_zone_report()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Add thermal zone support to monitor ASIC's temperature.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When memory is limited (on kdump kernel), reduce size of rx and tx rings.
Also reduce the number of rx rings.
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 7e6358d244e47 ("dm: fix various targets to dm_register_target
after module __init resources created") inadvertently introduced this
bug when it moved dm_register_target() after the call to KMEM_CACHE().
Fixes: 7e6358d244e47 ("dm: fix various targets to dm_register_target after module __init resources created")
Cc: stable@vger.kernel.org
Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Arthur Kiyanovski says:
====================
minor bug fixes for ENA Ethernet driver
Arthur Kiyanovski (4):
net: ena: fix warning in rmmod caused by double iounmap
net: ena: fix rare bug when failed restart/resume is followed by
driver removal
net: ena: fix NULL dereference due to untimely napi initialization
net: ena: fix auto casting to boolean
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eliminate potential auto casting compilation error.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
napi poll functions should be initialized before running request_irq(),
to handle a rare condition where there is a pending interrupt, causing
the ISR to fire immediately while the poll function wasn't set yet,
causing a NULL dereference.
Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In a rare scenario when ena_device_restore() fails, followed by device
remove, an FLR will not be issued. In this case, the device will keep
sending asynchronous AENQ keep-alive events, even after driver removal,
leading to memory corruption.
Fixes: 8c5c7abdeb2d ("net: ena: add power management ops to the ENA driver")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Memory mapped with devm_ioremap is automatically freed when the driver
is disconnected from the device. Therefore there is no need to
explicitly call devm_iounmap.
Fixes: 0857d92f71b6 ("net: ena: add missing unmap bars on device removal")
Fixes: 411838e7b41c ("net: ena: fix rare kernel crash when bar memory remap fails")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm fixes for 4.19, take #2
- Correctly order GICv3 SGI registers in the cp15 array
|
|
SEV requires access to the AMD cryptographic device APIs, and this
does not work when KVM is builtin and the crypto driver is a module.
Actually the Kconfig conditions for CONFIG_KVM_AMD_SEV try to disable
SEV in that case, but it does not work because the actual crypto
calls are not culled, only sev_hardware_setup() is.
This patch adds two CONFIG_KVM_AMD_SEV checks that gate all the remaining
SEV code; it fixes this particular configuration, and drops 5 KiB of
code when CONFIG_KVM_AMD_SEV=n.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 64bc06bb32ee broke buffered writes to journaled files (chattr
+j): we'll try to journal the buffer heads of the page being written to
in gfs2_iomap_journaled_page_done. However, the iomap code no longer
creates buffer heads, so we'll BUG() in gfs2_page_add_databufs. Fix
that by creating buffer heads ourself when needed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The ICC_ASGI1R and ICC_SGI0R register entries in the cp15 array
are not correctly ordered, leading to a BUG() at boot time.
Move them to their natural location.
Fixes: 3e8a8a50c7ef ("KVM: arm: vgic-v3: Add support for ICC_SGI0R and ICC_ASGI1R accesses")
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
On some SD cards over SPI, reading with the multiblock read command the last
sector will leave the card in a bad state.
Remove last sectors from the multiblock reading cmd.
Signed-off-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Vineet writes:
"ARC updates for 4.19-rc8
- Fix clone syscall to update Thread pointer register
- Make/build updates (needed for AGL/OE builds) [Alexey]
- Typo fix [Colin Ian King]"
* tag 'arc-4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: clone syscall to setp r25 as thread pointer
ARC: build: Don't set CROSS_COMPILE in arch's Makefile
ARC: fix spelling mistake "entires" -> "entries"
ARC: build: Get rid of toolchain check
ARCv2: build: use mcpu=hs38 iso generic mcpu=archs
|
|
Arnd Bergmann reported that turning on -Wvla found a new (unintended) VLA usage:
arch/x86/mm/pgtable.c: In function 'pgd_alloc':
include/linux/build_bug.h:29:45: error: ISO C90 forbids variable length array 'u_pmds' [-Werror=vla]
arch/x86/mm/pgtable.c:190:34: note: in expansion of macro 'static_cpu_has'
#define PREALLOCATED_USER_PMDS (static_cpu_has(X86_FEATURE_PTI) ? \
^~~~~~~~~~~~~~
arch/x86/mm/pgtable.c:431:16: note: in expansion of macro 'PREALLOCATED_USER_PMDS'
pmd_t *u_pmds[PREALLOCATED_USER_PMDS];
^~~~~~~~~~~~~~~~~~~~~~
Use the actual size of the array that is used for X86_FEATURE_PTI,
which is known at build time, instead of the variable size.
[ mingo: Squashed original fix with followup fix to avoid bisection breakage, wrote new changelog. ]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Original-written-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hpe.com>
Fixes: 1be3f247c288 ("x86/mm: Avoid VLA in pgd_alloc()")
Link: http://lkml.kernel.org/r/20181008235434.GA35035@beast
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-10-08
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) sk_lookup_[tcp|udp] and sk_release helpers from Joe Stringer which allow
BPF programs to perform lookups for sockets in a network namespace. This would
allow programs to determine early on in processing whether the stack is
expecting to receive the packet, and perform some action (eg drop,
forward somewhere) based on this information.
2) per-cpu cgroup local storage from Roman Gushchin.
Per-cpu cgroup local storage is very similar to simple cgroup storage
except all the data is per-cpu. The main goal of per-cpu variant is to
implement super fast counters (e.g. packet counters), which don't require
neither lookups, neither atomic operations in a fast path.
The example of these hybrid counters is in selftests/bpf/netcnt_prog.c
3) allow HW offload of programs with BPF-to-BPF function calls from Quentin Monnet
4) support more than 64-byte key/value in HW offloaded BPF maps from Jakub Kicinski
5) rename of libbpf interfaces from Andrey Ignatov.
libbpf is maturing as a library and should follow good practices in
library design and implementation to play well with other libraries.
This patch set brings consistent naming convention to global symbols.
6) relicense libbpf as LGPL-2.1 OR BSD-2-Clause from Alexei Starovoitov
to let Apache2 projects use libbpf
7) various AF_XDP fixes from Björn and Magnus
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the leftover pglist_data::numabalancing_migrate_lock and its
initialization, we stopped using this lock with:
efaffc5e40ae ("mm, sched/numa: Remove rate-limiting of automatic NUMA balancing migration")
[ mingo: Rewrote the changelog. ]
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-MM <linux-mm@kvack.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1538824999-31230-1-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
While the DOC at the beginning of lib/bitmap.c explicitly states that
"The number of valid bits in a given bitmap does _not_ need to be an
exact multiple of BITS_PER_LONG.", some of the bitmap operations do
indeed access BITS_PER_LONG portions of the provided bitmap no matter
the size of the provided bitmap. For example, if bitmap_intersects()
is provided with an 8 bit bitmap the operation will access
BITS_PER_LONG bits from the provided bitmap. While the operation
ensures that these extra bits do not affect the result, the memory
is still accessed.
The capacity bitmasks (CBMs) are typically stored in u32 since they
can never exceed 32 bits. A few instances exist where a bitmap_*
operation is performed on a CBM by simply pointing the bitmap operation
to the stored u32 value.
The consequence of this pattern is that some bitmap_* operations will
access out-of-bounds memory when interacting with the provided CBM. This
is confirmed with a KASAN test that reports:
BUG: KASAN: stack-out-of-bounds in __bitmap_intersects+0xa2/0x100
and
BUG: KASAN: stack-out-of-bounds in __bitmap_weight+0x58/0x90
Fix this by moving any CBM provided to a bitmap operation needing
BITS_PER_LONG to an 'unsigned long' variable.
[ tglx: Changed related function arguments to unsigned long and got rid
of the _cbm extra step ]
Fixes: 72d505056604 ("x86/intel_rdt: Add utilities to test pseudo-locked region possibility")
Fixes: 49f7b4efa110 ("x86/intel_rdt: Enable setting of exclusive mode")
Fixes: d9b48c86eb38 ("x86/intel_rdt: Display resource groups' allocations' size in bytes")
Fixes: 95f0b77efa57 ("x86/intel_rdt: Initialize new resource group with sane defaults")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fenghua.yu@intel.com
Cc: tony.luck@intel.com
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/69a428613a53f10e80594679ac726246020ff94f.1538686926.git.reinette.chatre@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for your net-next tree:
1) Support for matching on ipsec policy already set in the route, from
Florian Westphal.
2) Split set destruction into deactivate and destroy phase to make it
fit better into the transaction infrastructure, also from Florian.
This includes a patch to warn on imbalance when setting the new
activate and deactivate interfaces.
3) Release transaction list from the workqueue to remove expensive
synchronize_rcu() from configuration plane path. This speeds up
configuration plane quite a bit. From Florian Westphal.
4) Add new xfrm/ipsec extension, this new extension allows you to match
for ipsec tunnel keys such as source and destination address, spi and
reqid. From Máté Eckl and Florian Westphal.
5) Add secmark support, this includes connsecmark too, patches
from Christian Gottsche.
6) Allow to specify remaining bytes in xt_quota, from Chenbo Feng.
One follow up patch to calm a clang warning for this one, from
Nathan Chancellor.
7) Flush conntrack entries based on layer 3 family, from Kristian Evensen.
8) New revision for cgroups2 to shrink the path field.
9) Get rid of obsolete need_conntrack(), as a result from recent
demodularization works.
10) Use WARN_ON instead of BUG_ON, from Florian Westphal.
11) Unused exported symbol in nf_nat_ipv4_fn(), from Florian.
12) Remove superfluous check for timeout netlink parser and dump
functions in layer 4 conntrack helpers.
13) Unnecessary redundant rcu read side locks in NAT redirect,
from Taehee Yoo.
14) Pass nf_hook_state structure to error handlers, patch from
Florian Westphal.
15) Remove ->new() interface from layer 4 protocol trackers. Place
them in the ->packet() interface. From Florian.
16) Place conntrack ->error() handling in the ->packet() interface.
Patches from Florian Westphal.
17) Remove unused parameter in the pernet initialization path,
also from Florian.
18) Remove additional parameter to specify layer 3 protocol when
looking up for protocol tracker. From Florian.
19) Shrink array of layer 4 protocol trackers, from Florian.
20) Check for linear skb only once from the ALG NAT mangling
codebase, from Taehee Yoo.
21) Use rhashtable_walk_enter() instead of deprecated
rhashtable_walk_init(), also from Taehee.
22) No need to flush all conntracks when only one single address
is gone, from Tan Hu.
23) Remove redundant check for NAT flags in flowtable code, from
Taehee Yoo.
24) Use rhashtable_lookup() instead of rhashtable_lookup_fast()
from netfilter codebase, since rcu read lock side is already
assumed in this path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The newly added TCP and UDP handling fails to link when CONFIG_INET
is disabled:
net/core/filter.o: In function `sk_lookup':
filter.c:(.text+0x7ff8): undefined reference to `tcp_hashinfo'
filter.c:(.text+0x7ffc): undefined reference to `tcp_hashinfo'
filter.c:(.text+0x8020): undefined reference to `__inet_lookup_established'
filter.c:(.text+0x8058): undefined reference to `__inet_lookup_listener'
filter.c:(.text+0x8068): undefined reference to `udp_table'
filter.c:(.text+0x8070): undefined reference to `udp_table'
filter.c:(.text+0x808c): undefined reference to `__udp4_lib_lookup'
net/core/filter.o: In function `bpf_sk_release':
filter.c:(.text+0x82e8): undefined reference to `sock_gen_put'
Wrap the related sections of code in #ifdefs for the config option.
Furthermore, sk_lookup() should always have been marked 'static', this
also avoids a warning about a missing prototype when building with
'make W=1'.
Fixes: 6acc9b432e67 ("bpf: Add helper to retrieve socket in BPF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Clang warns:
net/netfilter/xt_quota.c:47:44: warning: 'aligned' attribute ignored
when parsing type [-Wignored-attributes]
BUILD_BUG_ON(sizeof(atomic64_t) != sizeof(__aligned_u64));
^~~~~~~~~~~~~
Use 'sizeof(__u64)' instead, as the alignment doesn't affect the size
of the type.
Fixes: e9837e55b020 ("netfilter: xt_quota: fix the behavior of xt_quota module")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The rxrpc_input_packet() function and its call tree was built around the
assumption that data_ready() handler called from UDP to inform a kernel
service that there is data to be had was non-reentrant. This means that
certain locking could be dispensed with.
This, however, turns out not to be the case with a multi-queue network card
that can deliver packets to multiple cpus simultaneously. Each of those
cpus can be in the rxrpc_input_packet() function at the same time.
Fix by adding or changing some structure members:
(1) Add peer->rtt_input_lock to serialise access to the RTT buffer.
(2) Make conn->service_id into a 32-bit variable so that it can be
cmpxchg'd on all arches.
(3) Add call->input_lock to serialise access to the Rx/Tx state. Note
that although the Rx and Tx states are (almost) entirely separate,
there's no point completing the separation and having separate locks
since it's a bi-phasal RPC protocol rather than a bi-direction
streaming protocol. Data transmission and data reception do not take
place simultaneously on any particular call.
and making the following functional changes:
(1) In rxrpc_input_data(), hold call->input_lock around the core to
prevent simultaneous producing of packets into the Rx ring and
updating of tracking state for a particular call.
(2) In rxrpc_input_ping_response(), only read call->ping_serial once, and
check it before checking RXRPC_CALL_PINGING as that's a cheaper test.
The bit test and bit clear can then be combined. No further locking
is needed here.
(3) In rxrpc_input_ack(), take call->input_lock after we've parsed much of
the ACK packet. The superseded ACK check is then done both before and
after the lock is taken.
The handing of ackinfo data is split, parsing before the lock is taken
and processing with it held. This is keyed on rxMTU being non-zero.
Congestion management is also done within the locked section.
(4) In rxrpc_input_ackall(), take call->input_lock around the Tx window
rotation. The ACKALL packet carries no information and is only really
useful after all packets have been transmitted since it's imprecise.
(5) In rxrpc_input_implicit_end_call(), we use rx->incoming_lock to
prevent calls being simultaneously implicitly ended on two cpus and
also to prevent any races with incoming call setup.
(6) In rxrpc_input_packet(), use cmpxchg() to effect the service upgrade
on a connection. It is only permitted to happen once for a
connection.
(7) In rxrpc_new_incoming_call(), we have to recheck the routing inside
rx->incoming_lock to see if someone else set up the call, connection
or peer whilst we were getting there. We can't trust the values from
the earlier routing check unless we pin refs on them - which we want
to avoid.
Further, we need to allow for an incoming call to have its state
changed on another CPU between us making it live and us adjusting it
because the conn is now in the RXRPC_CONN_SERVICE state.
(8) In rxrpc_peer_add_rtt(), take peer->rtt_input_lock around the access
to the RTT buffer. Don't need to lock around setting peer->rtt.
For reference, the inventory of state-accessing or state-altering functions
used by the packet input procedure is:
> rxrpc_input_packet()
* PACKET CHECKING
* ROUTING
> rxrpc_post_packet_to_local()
> rxrpc_find_connection_rcu() - uses RCU
> rxrpc_lookup_peer_rcu() - uses RCU
> rxrpc_find_service_conn_rcu() - uses RCU
> idr_find() - uses RCU
* CONNECTION-LEVEL PROCESSING
- Service upgrade
- Can only happen once per conn
! Changed to use cmpxchg
> rxrpc_post_packet_to_conn()
- Setting conn->hi_serial
- Probably safe not using locks
- Maybe use cmpxchg
* CALL-LEVEL PROCESSING
> Old-call checking
> rxrpc_input_implicit_end_call()
> rxrpc_call_completed()
> rxrpc_queue_call()
! Need to take rx->incoming_lock
> __rxrpc_disconnect_call()
> rxrpc_notify_socket()
> rxrpc_new_incoming_call()
- Uses rx->incoming_lock for the entire process
- Might be able to drop this earlier in favour of the call lock
> rxrpc_incoming_call()
! Conflicts with rxrpc_input_implicit_end_call()
> rxrpc_send_ping()
- Don't need locks to check rtt state
> rxrpc_propose_ACK
* PACKET DISTRIBUTION
> rxrpc_input_call_packet()
> rxrpc_input_data()
* QUEUE DATA PACKET ON CALL
> rxrpc_reduce_call_timer()
- Uses timer_reduce()
! Needs call->input_lock()
> rxrpc_receiving_reply()
! Needs locking around ack state
> rxrpc_rotate_tx_window()
> rxrpc_end_tx_phase()
> rxrpc_proto_abort()
> rxrpc_input_dup_data()
- Fills the Rx buffer
- rxrpc_propose_ACK()
- rxrpc_notify_socket()
> rxrpc_input_ack()
* APPLY ACK PACKET TO CALL AND DISCARD PACKET
> rxrpc_input_ping_response()
- Probably doesn't need any extra locking
! Need READ_ONCE() on call->ping_serial
> rxrpc_input_check_for_lost_ack()
- Takes call->lock to consult Tx buffer
> rxrpc_peer_add_rtt()
! Needs to take a lock (peer->rtt_input_lock)
! Could perhaps manage with cmpxchg() and xadd() instead
> rxrpc_input_requested_ack
- Consults Tx buffer
! Probably needs a lock
> rxrpc_peer_add_rtt()
> rxrpc_propose_ack()
> rxrpc_input_ackinfo()
- Changes call->tx_winsize
! Use cmpxchg to handle change
! Should perhaps track serial number
- Uses peer->lock to record MTU specification changes
> rxrpc_proto_abort()
! Need to take call->input_lock
> rxrpc_rotate_tx_window()
> rxrpc_end_tx_phase()
> rxrpc_input_soft_acks()
- Consults the Tx buffer
> rxrpc_congestion_management()
- Modifies the Tx annotations
! Needs call->input_lock()
> rxrpc_queue_call()
> rxrpc_input_abort()
* APPLY ABORT PACKET TO CALL AND DISCARD PACKET
> rxrpc_set_call_completion()
> rxrpc_notify_socket()
> rxrpc_input_ackall()
* APPLY ACKALL PACKET TO CALL AND DISCARD PACKET
! Need to take call->input_lock
> rxrpc_rotate_tx_window()
> rxrpc_end_tx_phase()
> rxrpc_reject_packet()
There are some functions used by the above that queue the packet, after
which the procedure is terminated:
- rxrpc_post_packet_to_local()
- local->event_queue is an sk_buff_head
- local->processor is a work_struct
- rxrpc_post_packet_to_conn()
- conn->rx_queue is an sk_buff_head
- conn->processor is a work_struct
- rxrpc_reject_packet()
- local->reject_queue is an sk_buff_head
- local->processor is a work_struct
And some that offload processing to process context:
- rxrpc_notify_socket()
- Uses RCU lock
- Uses call->notify_lock to call call->notify_rx
- Uses call->recvmsg_lock to queue recvmsg side
- rxrpc_queue_call()
- call->processor is a work_struct
- rxrpc_propose_ACK()
- Uses call->lock to wrap __rxrpc_propose_ACK()
And a bunch that complete a call, all of which use call->state_lock to
protect the call state:
- rxrpc_call_completed()
- rxrpc_set_call_completion()
- rxrpc_abort_call()
- rxrpc_proto_abort()
- Also uses rxrpc_queue_call()
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Fix the rxrpc_tx_packet trace line by storing the where parameter.
Fixes: 4764c0da69dc ("rxrpc: Trace packet transmission")
Signed-off-by: David Howells <dhowells@redhat.com>
|
