| Age | Commit message (Collapse) | Author |
|---|
|
All the drivers have long since been upgraded, and all the important
information here is also included in the "Implementing I2C device
drivers" guide.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20200806161456.8680-1-steve@sk2.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
A table lists the 5.2 stable release date as September 15, but it was
released on July 7. This may confuse a reader who is trying to
understand the stable update release cycle.
Signed-off-by: Billy Wilson <billy_wilson@byu.edu>
Link: https://lore.kernel.org/r/20200806231754.7735-1-billy_wilson@byu.edu
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Without having first read the git-shortlog man-page, the format
of .mailmap may not be immediately obvious. Add comments with pointers
to the man-page, along with other details.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/202008080013.58EBD83@keescook
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
"The capability fags" should be "The capability flags".
In rst markup, a incorrect markup expression is causing bad rendering in
Sphinx output. Replace the erroneous single quote by a backquote.
Signed-off-by: Remi Andruccioli <remi.andruccioli@gmail.com>
Link: https://lore.kernel.org/r/20200808163123.17643-1-remi.andruccioli@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Documentation/admin-guide/kernel-parameters.rst includes a legend
telling us what configurations or hardware platforms are relevant
for certain boot options. For X86, it is spelled "X86" and for
x86_64, it is spelled "X86-64", so make corrections for those.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20200810024941.30231-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Support for these was added by the following commits:
f2c9699f6555 ("riscv: Add STACKPROTECTOR supported")
3c4697982982 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT").
ed48b297fe21 ("riscv: Enable context tracking")
cbb3d91d3bcf ("riscv: Add kmemleak support")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20200810095000.32092-1-tklauser@distanz.ch
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Modify coccinelle documentation to further clarify
the usage of the makefile C variable by coccicheck.
Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Acked-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/20200811002350.5553-1-sylphrenadin@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Replace :c:func: with func() as the previous usage is deprecated.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20200810183019.22170-1-puranjay12@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Replace :c:func: with func() as the previous usage is deprecated.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20200810183613.25643-1-puranjay12@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Replace :c:func: with func() as the previous usage is deprecated.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20200810184828.29297-1-puranjay12@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
emumerated -> enumerated
Signed-off-by: Bryan Brattlof <hello@bryanbrattlof.com>
Link: https://lore.kernel.org/r/87lfili2d8.fsf@bryanbrattlof.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Move all code from arch/s390/numa/ to arch/s390/kernel/
since numa.c is the only source file and all others were
deleted with the fake NUMA support removal.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Sven Schnelle reported that setting CLOCKSOURCE_VALIDATE_LAST_CYCLE
doesn't make sense: even if our tod clock overflows delta calculation
(now - last) with unsigned 64 bit values will still be correct.
Therefore revert commit 555701a714f7 ("s390/time: select
CLOCKSOURCE_VALIDATE_LAST_CYCLE").
Fixes: 555701a714f7 ("s390/time: select CLOCKSOURCE_VALIDATE_LAST_CYCLE")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Change __debug_entry structure in the following way:
- remove redundant union
- Field containing cpuid is expanded to 16 bits. 8-bit width was not
enough since we already support up to 512 cpus.
- Field containing the timestamp is expanded to 60 bits. The timestamp
itself is now stored in the absolute Unix time format in microseconds
taking the Epoch Index into acount.
Adjust default header for debug entries by setting minimum width for cpuid
to 4 digits.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The VFIO_AP uses ap_driver_register() (and deregister) functions
implemented in ap_bus.c (compiled into ap.o). However the ap.o will be
built only if CONFIG_ZCRYPT is selected.
This was not visible before commit e93a1695d7fb ("iommu: Enable compile
testing for some of drivers") because the CONFIG_VFIO_AP depends on
CONFIG_S390_AP_IOMMU which depends on the missing CONFIG_ZCRYPT. After
adding COMPILE_TEST, it is possible to select a configuration with
VFIO_AP and S390_AP_IOMMU but without the ZCRYPT.
Add proper dependency to the VFIO_AP to fix build errors:
ERROR: modpost: "ap_driver_register" [drivers/s390/crypto/vfio_ap.ko] undefined!
ERROR: modpost: "ap_driver_unregister" [drivers/s390/crypto/vfio_ap.ko] undefined!
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The node distance is hardcoded to 0, which causes a trouble
for some user-level applications. In particular, "libnuma"
expects the distance of a node to itself as LOCAL_DISTANCE.
This update removes the offending node distance override.
Cc: <stable@vger.kernel.org> # 4.4
Fixes: 3a368f742da1 ("s390/numa: add core infrastructure")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
In the first place, the initialization value of `rc` is wrong.
It is unnecessary to initialize `rc` variables, so remove their
initialization operation.
Fixes: f2bbc96e7cfad ("s390/pkey: add CCA AES cipher key support")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
test_unwind() misses to call kfree(bt) in an error path.
Add the missed function call to fix it.
Fixes: 0610154650f1 ("s390/test_unwind: print verbose unwinding results")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
During s390_enable_sie(), we need to take care of splitting all qemu user
process THP mappings. This is currently done with follow_page(FOLL_SPLIT),
by simply iterating over all vma ranges, with PAGE_SIZE increment.
This logic is sub-optimal and can result in a lot of unnecessary overhead,
especially when using qemu and ASAN with large shadow map. Ilya reported
significant system slow-down with one CPU busy for a long time and overall
unresponsiveness.
Fix this by using walk_page_vma() and directly calling split_huge_pmd()
only for present pmds, which greatly reduces overhead.
Cc: <stable@vger.kernel.org> # v5.4+
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Circumvent the following gcc 10 allyesconfig build regression:
CC drivers/leds/trigger/ledtrig-cpu.o
In file included from ./arch/s390/include/asm/bitops.h:39,
from ./include/linux/bitops.h:29,
from ./include/linux/kernel.h:12,
from drivers/leds/trigger/ledtrig-cpu.c:18:
./arch/s390/include/asm/atomic_ops.h: In function 'ledtrig_cpu':
./arch/s390/include/asm/atomic_ops.h:46:2: warning: 'asm' operand 1 probably does not match constraints
46 | asm volatile( \
| ^~~
./arch/s390/include/asm/atomic_ops.h:53:2: note: in expansion of macro '__ATOMIC_CONST_OP'
53 | __ATOMIC_CONST_OP(op_name, op_type, op_string, "\n") \
| ^~~~~~~~~~~~~~~~~
./arch/s390/include/asm/atomic_ops.h:56:1: note: in expansion of macro '__ATOMIC_CONST_OPS'
56 | __ATOMIC_CONST_OPS(__atomic_add_const, int, "asi")
| ^~~~~~~~~~~~~~~~~~
./arch/s390/include/asm/atomic_ops.h:46:2: error: impossible constraint in 'asm'
46 | asm volatile( \
| ^~~
./arch/s390/include/asm/atomic_ops.h:53:2: note: in expansion of macro '__ATOMIC_CONST_OP'
53 | __ATOMIC_CONST_OP(op_name, op_type, op_string, "\n") \
| ^~~~~~~~~~~~~~~~~
./arch/s390/include/asm/atomic_ops.h:56:1: note: in expansion of macro '__ATOMIC_CONST_OPS'
56 | __ATOMIC_CONST_OPS(__atomic_add_const, int, "asi")
| ^~~~~~~~~~~~~~~~~~
scripts/Makefile.build:280: recipe for target 'drivers/leds/trigger/ledtrig-cpu.o' failed
By swapping conditions as proposed here:
https://gcc.gnu.org/pipermail/gcc-patches/2020-July/549318.html
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Fix whitespace indenting and drop trailing backslashes.
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Allow intel_pstate to work in the passive mode with HWP enabled and
make it set the HWP minimum performance limit (HWP floor) to the
P-state value given by the target frequency supplied by the cpufreq
governor, so as to prevent the HWP algorithm and the CPU scheduler
from working against each other, at least when the schedutil governor
is in use, and update the intel_pstate documentation accordingly.
Among other things, this allows utilization clamps to be taken
into account, at least to a certain extent, when intel_pstate is
in use and makes it more likely that sufficient capacity for
deadline tasks will be provided.
After this change, the resulting behavior of an HWP system with
intel_pstate in the passive mode should be close to the behavior
of the analogous non-HWP system with intel_pstate in the passive
mode, except that the HWP algorithm is generally allowed to make the
CPU run at a frequency above the floor P-state set by intel_pstate in
the entire available range of P-states, while without HWP a CPU can
run in a P-state above the requested one if the latter falls into the
range of turbo P-states (referred to as the turbo range) or if the
P-states of all CPUs in one package are coordinated with each other
at the hardware level.
[Note that in principle the HWP floor may not be taken into account
by the processor if it falls into the turbo range, in which case the
processor has a license to choose any P-state, either below or above
the HWP floor, just like a non-HWP processor in the case when the
target P-state falls into the turbo range.]
With this change applied, intel_pstate in the passive mode assumes
complete control over the HWP request MSR and concurrent changes of
that MSR (eg. via the direct MSR access interface) are overridden by
it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
|
|
We're holding the request reference, but we need to go one higher
to ensure that the ctx remains valid after the request has finished.
If the ring is closed with pending task_work inflight, and the
given io_kiocb finishes sync during issue, then we need a reference
to the ring itself around the task_work execution cycle.
Cc: stable@vger.kernel.org # v5.7+
Reported-by: syzbot+9b260fc33297966f5a8e@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With the change allowing read-ahead for IOCB_NOWAIT, we changed the
RWF_NOWAIT semantics of only doing cached reads. Since we know have
IOCB_NOIO to manage that specific side of it, just make RWF_NOWAIT
imply IOCB_NOIO as well to restore the previous behavior.
Fixes: 2e85abf053b9 ("mm: allow read-ahead with IOCB_NOWAIT set")
Reported-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When LOOP_CONFIGURE is used with LO_FLAGS_PARTSCAN we need to propagate
this into the GENHD_FL_NO_PART_SCAN. LOOP_SETSTATUS does this,
LOOP_CONFIGURE doesn't so far. Effect is that setting up a loopback
device with partition scanning doesn't actually work when LOOP_CONFIGURE
is issued, though it works fine with LOOP_SETSTATUS.
Let's correct that and propagate the flag in LOOP_CONFIGURE too.
Fixes: 3448914e8cc5("loop: Add LOOP_CONFIGURE ioctl")
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Acked-by: Martijn Coenen <maco@android.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Before the micmute_led_set() is introduced, the function of
alc_gpio_micmute_update() will set the gpio value with the
!micmute_led.led_value, and the machines have the correct micmute led
status. After the micmute_led_set() is introduced, it sets the gpio
value with !!micmute_led.led_value, so the led status is not correct
anymore, we need to set micmute_led_polarity = 1 to workaround it.
Now we fix the micmute_led_set() and remove micmute_led_polarity = 1.
Fixes: 87dc36482cab ("ALSA: hda/realtek - Add LED class support for micmute LED")
Reported-and-suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200811122430.6546-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The dsp_registers field of struct echoaduio has the volatile modifier,
but it's basically superfluous; the field is accessed only for the
base pointer of readl() and writel(), hence marking with __iomem alone
should suffice. OTOH, having the volatile prefix causes a compile
warning like:
sound/pci/echoaudio/echoaudio.c:1878:14: warning: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Wdiscarded-qualifiers]
So it's better to drop this superfluous modifier.
Link: https://lore.kernel.org/r/20200803143958.24324-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit c34b26b98caca48ec9ee9 ("KVM: MIPS: clean up redundant 'kvm_run'
parameters") remove the 'kvm_run' parameter in kvm_vz_gpsi_lwc2.
The following build error:
arch/mips/kvm/vz.c: In function 'kvm_trap_vz_handle_gpsi':
arch/mips/kvm/vz.c:1243:43: error: 'run' undeclared (first use in this function)
er = kvm_vz_gpsi_lwc2(inst, opc, cause, run, vcpu);
^~~
arch/mips/kvm/vz.c:1243:43: note: each undeclared identifier is reported only
once for each function it appears in
scripts/Makefile.build:283: recipe for target 'arch/mips/kvm/vz.o' failed
make[2]: *** [arch/mips/kvm/vz.o] Error 1
scripts/Makefile.build:500: recipe for target 'arch/mips/kvm' failed
make[1]: *** [arch/mips/kvm] Error 2
Makefile:1785: recipe for target 'arch/mips' failed
make: *** [arch/mips] Error 2
Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Make hv_setup_sched_clock inline so the reference to pv_ops works
correctly with objtool updates to detect noinstr violations.
See https://lore.kernel.org/patchwork/patch/1283635/
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/1597022991-24088-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
btrfs_get_extent() sets variable ret, but out: error path expect error
to be in variable err so the error code is lost.
Fixes: 6bf9e4bd6a27 ("btrfs: inode: Verify inode mode to avoid NULL pointer dereference")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In an effort to enable -Wcast-function-type in the top-level Makefile to
support Control Flow Integrity builds, remove all the function callback
casts.
Co-developed-by: Helge Deller <deller@gmx.de>
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The function dereference_function_descriptor() takes on hppa64, ppc64
and ia64 a pointer to a function descriptor and returns a (void) pointer
to the dereferenced function.
To make cross-arch coding easier, on all other architectures the
dereference_function_descriptor() macro should return a void pointer
too.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Update the zonefs documentation to reflect the difference between a zone's
size and it's capacity.
The maximum file size in zonefs is the zones capacity, for ZBC and ZAC
based devices, which do not have a separate zone capacity, the zone
capacity is equal to the zone size.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
|
|
In the zoned storage model, the sectors within a zone are typically all
writeable. With the introduction of the Zoned Namespace (ZNS) Command
Set in the NVM Express organization, the model was extended to have a
specific writeable capacity.
This zone capacity can be less than the overall zone size for a NVMe ZNS
device or null_blk in zoned-mode. For other ZBC/ZAC devices the zone
capacity is always equal to the zone size.
Use the zone capacity field instead from blk_zone for determining the
maximum inode size and inode blocks in zonefs.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
|
|
With support for 32-bit pv guests gone pure pv-code no longer needs to
test for highmem. Dropping those tests removes the need for flushing
in some places.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
With 32-bit pv-guest support removed xen-asm_64.S can be merged with
xen-asm.S
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Xen is requiring 64-bit machines today and since Xen 4.14 it can be
built without 32-bit PV guest support. There is no need to carry the
burden of 32-bit PV guest support in the kernel any longer, as new
guests can be either HVM or PVH, or they can use a 64 bit kernel.
Remove the 32-bit Xen PV support from the kernel.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-fixes-5.9-2020-08-07:
amdgpu:
- Re-add spelling typo fix
- Sienna Cichlid fixes
- Navy Flounder fixes
- DC fixes
- SMU i2c fix
- Power fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200807222843.3909-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
"New features:
- Introduce controlling how 'perf stat' and 'perf record' works via a
control file descriptor, allowing starting with events configured
but disabled until commands are received via the control file
descriptor. This allows, for instance for tools such as Intel VTune
to make further use of perf as its Linux platform driver.
- Improve 'perf record' to to register in a perf.data file header the
clockid used to help later correlate things like syslog files and
perf events recorded.
- Add basic syscall and find_next_bit benchmarks to 'perf bench'.
- Allow using computed metrics in calculating other metrics. For
instance:
{
.metric_expr = "l2_rqsts.demand_data_rd_hit + l2_rqsts.pf_hit + l2_rqsts.rfo_hit",
.metric_name = "DCache_L2_All_Hits",
},
{
.metric_expr = "max(l2_rqsts.all_demand_data_rd - l2_rqsts.demand_data_rd_hit, 0) + l2_rqsts.pf_miss + l2_rqsts.rfo_miss",
.metric_name = "DCache_L2_All_Miss",
},
{
.metric_expr = "dcache_l2_all_hits + dcache_l2_all_miss",
.metric_name = "DCache_L2_All",
}
- Add suport for 'd_ratio', '>' and '<' operators to the expression
resolver used in calculating metrics in 'perf stat'.
Support for new kernel features:
- Support TEXT_POKE and KSYMBOL_TYPE_OOL perf metadata events to cope
with things like ftrace, trampolines, i.e. changes in the kernel
text that gets in the way of properly decoding Intel PT hardware
traces, for instance.
Intel PT:
- Add various knobs to reduce the volume of Intel PT traces by
reducing the level of details such as decoding just some types of
packets (e.g., FUP/TIP, PSB+), also filtering by time range.
- Add new itrace options (log flags to the 'd' option, error flags to
the 'e' one, etc), controlling how Intel PT is transformed into
perf events, document some missing options (e.g., how to synthesize
callchains).
BPF:
- Properly report BPF errors when parsing events.
- Do not setup side-band events if LIBBPF is not linked, fixing a
segfault.
Libraries:
- Improvements to the libtraceevent plugin mechanism.
- Improve libtracevent support for KVM trace events SVM exit reasons.
- Add a libtracevent plugins for decoding syscalls/sys_enter_futex
and for tlb_flush.
- Ensure sample_period is set libpfm4 events in 'perf test'.
- Fixup libperf namespacing, to make sure what is in libperf has the
perf_ namespace while what is now only in tools/perf/ doesn't use
that prefix.
Arch specific:
- Improve the testing of vendor events and metrics in 'perf test'.
- Allow no ARM CoreSight hardware tracer sink to be specified on
command line.
- Fix arm_spe_x recording when mixed with other perf events.
- Add s390 idle functions 'psw_idle' and 'psw_idle_exit' to list of
idle symbols.
- List kernel supplied event aliases for arm64 in 'perf list'.
- Add support for extended register capability in PowerPC 9 and 10.
- Added nest IMC power9 metric events.
Miscellaneous:
- No need to setup sample_regs_intr/sample_regs_user for dummy
events.
- Update various copies of kernel headers, some causing perf to
handle new syscalls, MSRs, etc.
- Improve usage of flex and yacc, enabling warnings and addressing
the fallout.
- Add missing '--output' option to 'perf kmem' so that it can pass it
along to 'perf record'.
- 'perf probe' fixes related to adding multiple probes on the same
address for the same event.
- Make 'perf probe' warn if the target function is a GNU indirect
function.
- Remove //anon mmap events from 'perf inject jit' to fix supporting
both using ELF files for generated functions and the perf-PID.map
approaches"
* tag 'perf-tools-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (144 commits)
perf record: Skip side-band event setup if HAVE_LIBBPF_SUPPORT is not set
perf tools powerpc: Add support for extended regs in power10
perf tools powerpc: Add support for extended register capability
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: update linux/in.h copy
tools headers API: Update close_range affected files
perf script: Add 'tod' field to display time of day
perf script: Change the 'enum perf_output_field' enumerators to be 64 bits
perf data: Add support to store time of day in CTF data conversion
perf tools: Move clockid_res_ns under clock struct
perf header: Store clock references for -k/--clockid option
perf tools: Add clockid_name function
perf clockid: Move parse_clockid() to new clockid object
tools lib traceevent: Handle possible strdup() error in tep_add_plugin_path() API
libtraceevent: Fixed description of tep_add_plugin_path() API
libtraceevent: Fixed type in PRINT_FMT_STING
libtraceevent: Fixed broken indentation in parse_ip4_print_args()
libtraceevent: Improve error handling of tep_plugin_add_option() API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Have config-bisect save the good/bad configs at each step.
- Show log file location even on success
- Add PRE_TEST_DIE to kill test if the PRE_TEST fails
- Add a NOT operator for conditionals in config file
- Add the log output of the last test when emailing on failure.
- Other minor clean ups and small fixes.
* tag 'ktest-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Fix spelling mistake "Cant" -> "Can't"
ktest.pl: Change the logic to control the size of the log file emailed
ktest.pl: Add MAIL_MAX_SIZE to limit the amount of log emailed
ktest.pl: Add the log of last test in email on failure
ktest.pl: Turn off buffering to the log file
ktest.pl: Just open up the log file once
ktest.pl: Add a NOT operator
ktest.pl: Define PRE_TEST_DIE to kill the test if the PRE_TEST fails
ktest.pl: Always show log file location if defined even on success
ktest.pl: Have config-bisect save each config used in the bisect
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Thomas Gleixner:
"A set of locking fixes and updates:
- Untangle the header spaghetti which causes build failures in
various situations caused by the lockdep additions to seqcount to
validate that the write side critical sections are non-preemptible.
- The seqcount associated lock debug addons which were blocked by the
above fallout.
seqcount writers contrary to seqlock writers must be externally
serialized, which usually happens via locking - except for strict
per CPU seqcounts. As the lock is not part of the seqcount, lockdep
cannot validate that the lock is held.
This new debug mechanism adds the concept of associated locks.
sequence count has now lock type variants and corresponding
initializers which take a pointer to the associated lock used for
writer serialization. If lockdep is enabled the pointer is stored
and write_seqcount_begin() has a lockdep assertion to validate that
the lock is held.
Aside of the type and the initializer no other code changes are
required at the seqcount usage sites. The rest of the seqcount API
is unchanged and determines the type at compile time with the help
of _Generic which is possible now that the minimal GCC version has
been moved up.
Adding this lockdep coverage unearthed a handful of seqcount bugs
which have been addressed already independent of this.
While generally useful this comes with a Trojan Horse twist: On RT
kernels the write side critical section can become preemtible if
the writers are serialized by an associated lock, which leads to
the well known reader preempts writer livelock. RT prevents this by
storing the associated lock pointer independent of lockdep in the
seqcount and changing the reader side to block on the lock when a
reader detects that a writer is in the write side critical section.
- Conversion of seqcount usage sites to associated types and
initializers"
* tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
locking/seqlock, headers: Untangle the spaghetti monster
locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header
x86/headers: Remove APIC headers from <asm/smp.h>
seqcount: More consistent seqprop names
seqcount: Compress SEQCNT_LOCKNAME_ZERO()
seqlock: Fold seqcount_LOCKNAME_init() definition
seqlock: Fold seqcount_LOCKNAME_t definition
seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g
hrtimer: Use sequence counter with associated raw spinlock
kvm/eventfd: Use sequence counter with associated spinlock
userfaultfd: Use sequence counter with associated spinlock
NFSv4: Use sequence counter with associated spinlock
iocost: Use sequence counter with associated spinlock
raid5: Use sequence counter with associated spinlock
vfs: Use sequence counter with associated spinlock
timekeeping: Use sequence counter with associated raw spinlock
xfrm: policy: Use sequence counters with associated lock
netfilter: nft_set_rbtree: Use sequence counter with associated rwlock
netfilter: conntrack: Use sequence counter with associated spinlock
sched: tasks: Use sequence counter with associated spinlock
...
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
* backmerge from drm-fixes at v5.8-rc7
* add orientation quirk for ASUS T103HAF
* drm/omap: force runtime PM suspend on system suspend
* drm/tidss: fix modeset init for DPI panels
* re-added docs for drm_gem_flink_ioctl()
* ttm: fix page-offset calculation within TTM
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200804125510.GA29670@linux-uq9g
|
|
I need to backmerge 5.8 as I've got a bunch of fixes sitting
on an rc7 base that I want to land.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've added two small interfaces: (a) GC_URGENT_LOW
mode for performance and (b) F2FS_IOC_SEC_TRIM_FILE ioctl for
security.
The new GC mode allows Android to run some lower priority GCs in
background, while new ioctl discards user information without race
condition when the account is removed.
In addition, some patches were merged to address latency-related
issues. We've fixed some compression-related bug fixes as well as edge
race conditions.
Enhancements:
- add GC_URGENT_LOW mode in gc_urgent
- introduce F2FS_IOC_SEC_TRIM_FILE ioctl
- bypass racy readahead to improve read latencies
- shrink node_write lock coverage to avoid long latency
Bug fixes:
- fix missing compression flag control, i_size, and mount option
- fix deadlock between quota writes and checkpoint
- remove inode eviction path in synchronous path to avoid deadlock
- fix to wait GCed compressed page writeback
- fix a kernel panic in f2fs_is_compressed_page
- check page dirty status before writeback
- wait page writeback before update in node page write flow
- fix a race condition between f2fs_write_end_io and f2fs_del_fsync_node_entry
We've added some minor sanity checks and refactored trivial code
blocks for better readability and debugging information"
* tag 'f2fs-for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits)
f2fs: prepare a waiter before entering io_schedule
f2fs: update_sit_entry: Make the judgment condition of f2fs_bug_on more intuitive
f2fs: replace test_and_set/clear_bit() with set/clear_bit()
f2fs: make file immutable even if releasing zero compression block
f2fs: compress: disable compression mount option if compression is off
f2fs: compress: add sanity check during compressed cluster read
f2fs: use macro instead of f2fs verity version
f2fs: fix deadlock between quota writes and checkpoint
f2fs: correct comment of f2fs_exist_written_data
f2fs: compress: delay temp page allocation
f2fs: compress: fix to update isize when overwriting compressed file
f2fs: space related cleanup
f2fs: fix use-after-free issue
f2fs: Change the type of f2fs_flush_inline_data() to void
f2fs: add F2FS_IOC_SEC_TRIM_FILE ioctl
f2fs: should avoid inode eviction in synchronous path
f2fs: segment.h: delete a duplicated word
f2fs: compress: fix to avoid memory leak on cc->cpages
f2fs: use generic names for generic ioctls
f2fs: don't keep meta inode pages used for compressed block migration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Make sure transactions won't be started recursively in
gfs2_block_zero_range (bug introduced in 5.4 when switching to
iomap_zero_range)
- Fix a glock holder refcount leak introduced in the iopen glock
locking scheme rework merged in 5.8.
- A few other small improvements (debugging, stack usage, comment
fixes).
* tag 'gfs2-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: When gfs2_dirty_inode gets a glock error, dump the glock
gfs2: Never call gfs2_block_zero_range with an open transaction
gfs2: print details on transactions that aren't properly ended
gfs2: Fix inaccurate comment
fs: Fix typo in comment
gfs2: Fix refcount leak in gfs2_glock_poke
gfs2: Pass glock holder to gfs2_file_direct_{read,write}
gfs2: Add some flags missing from glock output
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull JFFS2, UBI and UBIFS updates from Richard Weinberger:
"JFFS2:
- Fix for a corner case while mounting
- Fix for an use-after-free issue
UBI:
- Fix for a memory load while attaching
- Don't produce an anchor PEB with fastmap being disabled
UBIFS:
- Fix for orphan inode logic
- Spelling fixes
- New mount option to specify filesystem version"
* tag 'for-linus-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
jffs2: fix UAF problem
jffs2: fix jffs2 mounting failure
ubifs: Fix wrong orphan node deletion in ubifs_jnl_update|rename
ubi: fastmap: Free fastmap next anchor peb during detach
ubi: fastmap: Don't produce the initial next anchor PEB when fastmap is disabled
ubifs: misc.h: delete a duplicated word
ubifs: add option to specify version for new file systems
|
|
There is a spelling mistake in a DRM_ERROR message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
|
|
There is a spelling mistake in a DRM_ERROR message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
|
|
Same problem as in stdu, same fix.
Fixes: 51f644b40b4b ("drm/atomic-helper: reset vblank on crtc reset")
Acked-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
|
|
Same problem as in stdu, same fix.
Fixes: 51f644b40b4b ("drm/atomic-helper: reset vblank on crtc reset")
Acked-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
|
