summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-15rtc: rv3028: fix clock output supportAlexandre Belloni
rv3028_clkout_set_rate unconditionally sets RV3028_CLKOUT_CLKOE but clk_set_rate may be called with the clock disabled. Ensure the clock is kept disabled if it was not yet enabled. Also, the actual rate was overwritten when enabling the clock, properly write to the register only once. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201009153101.721149-1-alexandre.belloni@bootlin.com
2020-10-15rtc: mt6397: Remove unused member devFei Shao
Removing the struct member "dev" in mt6397 RTC driver because it's not initialized and the only usage is for one debugging message. Also fixed a typo in the error message. Signed-off-by: Fei Shao <fshao@chromium.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201008093414.1911699-1-fshao@chromium.org
2020-09-29rtc: rv8803: simplify the return expression of rv8803_nvram_writeLiu Shixin
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200921082449.2591981-1-liushixin2@huawei.com
2020-09-29rtc: meson: simplify the return expression of meson_vrtc_probeLiu Shixin
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200919100856.1639319-1-liushixin2@huawei.com
2020-09-29rtc: rx8010: rename rx8010_init_client() to rx8010_init()Bartosz Golaszewski
Since the switch to using regmap this function no longer takes the I2C client struct as argument nor do we even interact with the client anywhere other than when creating the regmap. Rename it to a less misleading name: "rx8010_init()". Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200917114656.9036-1-brgl@bgdev.pl
2020-09-24rtc: ds1307: enable rx8130's backup battery, make it chargeable optionallyBastian Krause
The ds1307 charger infrastructure now allows to add a rx8130 charger setup that.. - does not depend on trickle-resistor-ohms - does not use DS13XX_TRICKLE_CHARGER_MAGIC trickle-charge select (TCS) bits - keeps previous no-charge behavior for device trees without aux-voltage-chargeable Make that happen. Signed-off-by: Bastian Krause <bst@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200917183246.19446-9-bst@pengutronix.de
2020-09-24rtc: ds1307: consider aux-voltage-chargeableBastian Krause
Prefer aux-voltage-chargeable over trickle-diode-disable and set diode accordingly. This is then passed to the chip's appropriate charge setup function. Signed-off-by: Bastian Krause <bst@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200917183246.19446-8-bst@pengutronix.de
2020-09-24rtc: ds1307: store previous charge default per chipBastian Krause
Some RTC's batteries and supercaps were charged by default until now. In contrast other RTCs allow charging but the driver did not configure them to do so until now. These must not be charged by default to stay backwards compatible. In order to do that, store the charge default per chip. Signed-off-by: Bastian Krause <bst@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200917183246.19446-7-bst@pengutronix.de
2020-09-24rtc: ds1307: introduce requires_trickle_resistor per chipBastian Krause
Make trickle-resistor-ohms optional for charging setups that do not require specifying ROUT bits (specifying the resistor value between Vcc and Vbackup). In order to allow specifying that, introduce requires_trickle_resistor per chip. Signed-off-by: Bastian Krause <bst@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200917183246.19446-6-bst@pengutronix.de
2020-09-24rtc: ds1307: apply DS13XX_TRICKLE_CHARGER_MAGIC only conditionallyBastian Krause
DS13XX_TRICKLE_CHARGER_MAGIC sets the trickle-charge select (TCS) bits (7..4). The datasheet of Maxim Integrated's DS1339 [1] for instance reads: "To prevent accidental enabling, only a pattern on 1010 enables the trickle charger. All other patterns disable the trickle charger." Since not all RTCs connected to a backup battery or supercap use these bits DS13XX_TRICKLE_CHARGER_MAGIC should not get applied for all charger setups unconditionally. Epson's RX8130 is such an example: Instead of TCS bits "SMPTSEL1", "SMPTSEL0", "CHGEN" and "INIEN" are expected as bit 7..4. DS1339 and DS1340 are currently the only RTCs in the ds1307 driver that apply DS13XX_TRICKLE_CHARGER_MAGIC to their setup register value. So apply DS13XX_TRICKLE_CHARGER_MAGIC in do_trickle_setup_ds1339() which is used by both RTCs. [1] https://datasheets.maximintegrated.com/en/ds/DS1339-DS1339U.pdf [2] https://support.epson.biz/td/api/doc_check.php?dl=app_RX8130CE Signed-off-by: Bastian Krause <bst@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200917183246.19446-5-bst@pengutronix.de
2020-09-24dt-bindings: rtc: ds1307: add rx8130 aux-voltage-chargeable supportBastian Krause
Epson's RX8130 was not charged before. A related patch will allow optional charging. Signed-off-by: Bastian Krause <bst@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200917183246.19446-4-bst@pengutronix.de
2020-09-24dt-bindings: rtc: ds1307: let aux-voltage-chargeable supersede ↵Bastian Krause
trickle-diode-disable trickle-diode-disable is deprecated, so reflect that in the driver's binding and add the new aux-voltage-chargeable. Signed-off-by: Bastian Krause <bst@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200917183246.19446-3-bst@pengutronix.de
2020-09-24dt-bindings: rtc: let aux-voltage-chargeable supersede trickle-diode-disableBastian Krause
Some RTCs can be equipped with a chargeable battery or supercap. Every RTC allowing this whose driver's implement it are charged by default. To disable this the trickle-diode-disable flag exists. If a driver did not support charging and some time later one wants to add that feature, there is currently no way to do it without breaking dt backwards compatibility. RTCs on boards without the trickle-diode-disable flag in their device tree would suddenly charge their battery/supercap which is a change in behavior. Change that by introducing aux-voltage-chargeable, not as a flag but as a uint32 enum allowing to set "do not charge" (0) or "charge" (1). This dt property is optional, so we can now distinguish these cases. Care must be taken to support the old behavior for device trees without aux-voltage-chargeable nonetheless to stay compatible. Signed-off-by: Bastian Krause <bst@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200917183246.19446-2-bst@pengutronix.de
2020-09-15rtc: pcf2127: fix a bug when not specify interrupts propertyBiwen Li
Fix a bug when not specify interrupts property in dts as follows, rtc-pcf2127-i2c 1-0051: failed to request alarm irq rtc-pcf2127-i2c: probe of 1-0051 failed with error -22 Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200915073213.12779-1-biwen.li@oss.nxp.com
2020-09-15rtc: ds1685: Fix bank switching to avoid endless loopThomas Bogendoerfer
ds1685_rtc_begin_data_access() tried to access an extended register before enabling access to it by switching to bank 1. Depending on content in NVRAM this could lead to an endless loop. While at it fix also switch back to bank 0 in ds1685_rtc_end_data_access(). Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Joshua Kinard <kumba@gentoo.org> Link: https://lore.kernel.org/r/20200910084124.138560-1-tsbogend@alpha.franken.de
2020-09-15rtc: st-lpc: Constify st_rtc_opsRikard Falkeborn
The only usage of st_rtc_ops is to assign its address to the ops field in the rtc_device struct. which is a const pointer. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200913122644.35515-1-rikard.falkeborn@gmail.com
2020-09-15rtc: rx8010: use range checking provided by core RTC codeBartosz Golaszewski
We don't need to check the time range manually in set_time(), we can use range_min and range_max exposed by struct rtc_device. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-15-brgl@bgdev.pl
2020-09-15rtc: rx8010: convert to using regmapBartosz Golaszewski
This driver requires SMBUS to work. We can relax this requirement if we switch to using i2c regmap and let the regmap sub-system figure out how to talk to the bus. This also has the advantage of shrinking the code for register updates. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-14-brgl@bgdev.pl
2020-09-15rtc: rx8010: switch to using the preferred i2c APIBartosz Golaszewski
We should generally use probe_new instead of probe when registering i2c drivers. Convert rx8010 to using it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-13-brgl@bgdev.pl
2020-09-15rtc: rx8010: switch to using the preferred RTC APIBartosz Golaszewski
Use devm_rtc_allocate_device() + rtc_register_device() instead of the deprecated devm_rtc_device_register(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-12-brgl@bgdev.pl
2020-09-15rtc: rx8010: prefer sizeof(*val) over sizeof(struct type_of_val)Bartosz Golaszewski
Using the size of the variable is preferred over using the size of its type when allocating memory. Convert the call to devm_kzalloc() in probe(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-11-brgl@bgdev.pl
2020-09-15rtc: rx8010: use a helper variable for client->dev in probe()Bartosz Golaszewski
Simple 'dev' looks better then repeated &client->dev and has the added benefit of avoiding unnecessary line breaks. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-10-brgl@bgdev.pl
2020-09-15rtc: rx8010: drop unnecessary initializationBartosz Golaszewski
The 'err' local variable in rx8010_init_client() doesn't need to be initialized. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-9-brgl@bgdev.pl
2020-09-15rtc: rx8010: don't use magic values for time buffer lengthBartosz Golaszewski
The time buffer len is used directly in this driver. For readability it's better to define it as the difference between the date register offsets and use sizeof() whenever referencing it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-8-brgl@bgdev.pl
2020-09-15rtc: rx8010: rename ret to err in rx8010_set_time()Bartosz Golaszewski
All other functions in this driver use 'err' for integer return values. Do the same in rx8010_set_time() for consistency. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-7-brgl@bgdev.pl
2020-09-15rtc: rx8010: use tabs instead of spaces for code formattingBartosz Golaszewski
The define values in this driver are close to their names and they are separated by spaces. Use tabs instead and align all defines. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-6-brgl@bgdev.pl
2020-09-15rtc: rx8010: consolidate local variables of the same typeBartosz Golaszewski
Move local variables of the same type into a single line for better readability. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-5-brgl@bgdev.pl
2020-09-15rtc: rx8010: remove unnecessary bracketsBartosz Golaszewski
Remove brackets wherever they guard a single line. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-4-brgl@bgdev.pl
2020-09-15rtc: rx8010: remove a stray newlineBartosz Golaszewski
Remove an unnecessary newline after requesting the interrupt. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200914154601.32245-3-brgl@bgdev.pl
2020-09-15rtc: rx8010: don't modify the global rtc opsBartosz Golaszewski
The way the driver is implemented is buggy for the (admittedly unlikely) use case where there are two RTCs with one having an interrupt configured and the second not. This is caused by the fact that we use a global rtc_class_ops struct which we modify depending on whether the irq number is present or not. Fix it by using two const ops structs with and without alarm operations. While at it: not being able to request a configured interrupt is an error so don't ignore it and bail out of probe(). Fixes: ed13d89b08e3 ("rtc: Add Epson RX8010SJ RTC driver") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200914154601.32245-2-brgl@bgdev.pl
2020-09-15rtc: s3c: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200830080937.14367-1-krzk@kernel.org
2020-08-21rtc: fsl-ftm-alarm: update acpi device idPeng Ma
Original device id would conflict with crypto driver, change it. Signed-off-by: Peng Ma <peng.ma@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200818063609.39859-1-ran.wang_1@nxp.com
2020-08-21rtc: ds1307: Clear OSF flag on DS1388 when setting timeChris Packham
Ensure the OSF flag is cleared on the DS1388 when the clock is set. Fixes: df11b323b16f ("rtc: ds1307: handle oscillator failure flags for ds1388 variant") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200818013543.4283-1-chris.packham@alliedtelesis.co.nz
2020-08-21rtc: ds1307: Ensure oscillator is enabled for DS1388Chris Packham
Similar to the other variants the DS1388 has a bit to stop the oscillator to reduce the power consumption from VBAT. Ensure that the oscillator is enabled when the system is up. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200816235731.21071-1-chris.packham@alliedtelesis.co.nz
2020-08-21rtc: rtc-rs5c313: Convert to module_platform_driver()Geert Uytterhoeven
Reduce boilerplate by using the module_platform_driver() helper. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200814110731.29029-4-geert+renesas@glider.be
2020-08-21rtc: rtc-rs5c313: Fix late hardware initGeert Uytterhoeven
rs5c313_rtc_init() calls platform_driver_register(), and initializes the hardware. This is wrong because of two reasons: 1. As soon as the driver has been registered, the device may be probed. If devm_rtc_device_register() is called before hardware initialization, reading the current time will fail: rs5c313 rs5c313: rs5c313_rtc_read_time: timeout error rs5c313 rs5c313: registered as rtc0 rs5c313 rs5c313: rs5c313_rtc_read_time: timeout error rs5c313 rs5c313: hctosys: unable to read the hardware clock 2. If the platform device does not exist, the driver will still write to a hardware device that may not be present. Fix this by moving the hardware initialization sequence to the driver's .probe() method. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200814110731.29029-3-geert+renesas@glider.be
2020-08-21rtc: rtc-rs5c313: Drop obsolete platform_set_drvdata() callGeert Uytterhoeven
Commit 284e2fa1da00a998 ("rtc: rtc-rs5c313: use devm_rtc_device_register()"), removed the last user of the driver-specific data. Hence there is no longer a need to set it. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200814110731.29029-2-geert+renesas@glider.be
2020-08-21rtc: cmos: zero-init wkalrm when reading from CMOSVictor Ding
cmos_read_alarm() may leave certain fields of a struct rtc_wkalrm untouched; therefore, these fields contain garbage if not properly initialized, leading to inconsistent values when converting into time64_t. This patch to zero initialize the struct before calling cmos_read_alarm(). Note that this patch is not intended to produce a correct time64_t, it is only to produce a consistent value. In the case of suspend/resume, a correct time64_t is not necessary; a consistent value is sufficient to correctly perform an equality test for t_current_expires and t_saved_expires. Logic to deduce a correct time64_t is expensive and hence should be avoided. Signed-off-by: Victor Ding <victording@google.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20200814191654.v2.1.Iaf7638a2f2a87ff68d85fcb8dec615e41340c97f@changeid
2020-08-16Linux 5.9-rc1v5.9-rc1Linus Torvalds
2020-08-16Merge tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lookup of links holding inflight files io_uring: fail poll arm on queue proc failure io_uring: hold 'ctx' reference around task_work queue + execute fs: RWF_NOWAIT should imply IOCB_NOIO io_uring: defer file table grabbing request cleanup for locked requests io_uring: add missing REQ_F_COMP_LOCKED for nested requests io_uring: fix recursive completion locking on oveflow flush io_uring: use TWA_SIGNAL for task_work uncondtionally io_uring: account locked memory before potential error case io_uring: set ctx sq/cq entry count earlier io_uring: Fix NULL pointer dereference in loop_rw_iter() io_uring: add comments on how the async buffered read retry works io_uring: io_async_buf_func() need not test page bit
2020-08-16parisc: fix PMD pages allocation by restoring pmd_alloc_one()Mike Rapoport
Commit 1355c31eeb7e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") converted parisc to use generic version of pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for PMD. Restore the original version of pmd_alloc_one() for parisc, just use GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and memset. Fixes: 1355c31eeb7e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Meelis Roos <mroos@linux.ee> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.ee Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-15Merge tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create
2020-08-15Merge tag 'riscv-for-linus-5.9-mw1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fix from Palmer Dabbelt: "I collected a single fix during the merge window: we managed to break the early trap setup on !MMU, this fixes it" * tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Setup exception vector for nommu platform
2020-08-15Merge tag 'sh-for-5.9' of git://git.libc.org/linux-shLinus Torvalds
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
2020-08-15io_uring: short circuit -EAGAIN for blocking read attemptJens Axboe
One case was missed in the short IO retry handling, and that's hitting -EAGAIN on a blocking attempt read (eg from io-wq context). This is a problem on sockets that are marked as non-blocking when created, they don't carry any REQ_F_NOWAIT information to help us terminate them instead of perpetually retrying. Fixes: 227c0c9673d8 ("io_uring: internally retry short reads") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-15io_uring: sanitize double poll handlingJens Axboe
There's a bit of confusion on the matching pairs of poll vs double poll, depending on if the request is a pure poll (IORING_OP_POLL_ADD) or poll driven retry. Add io_poll_get_double() that returns the double poll waitqueue, if any, and io_poll_get_single() that returns the original poll waitqueue. With that, remove the argument to io_poll_remove_double(). Finally ensure that wait->private is cleared once the double poll handler has run, so that remove knows it's already been seen. Cc: stable@vger.kernel.org # v5.8 Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com Fixes: 18bceab101ad ("io_uring: allow POLL_ADD with double poll_wait() users") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-15Merge tag 'perf-tools-2020-08-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: "Fixes: - Fixes for 'perf bench numa'. - Always memset source before memcpy in 'perf bench mem'. - Quote CC and CXX for their arguments to fix build in environments using those variables to pass more than just the compiler names. - Fix module symbol processing, addressing regression detected via "perf test". - Allow multiple probes in record+script_probe_vfs_getname.sh 'perf test' entry. Improvements: - Add script to autogenerate socket family name id->string table from copy of kernel header, used so far in 'perf trace'. - 'perf ftrace' improvements to provide similar options for this utility so that one can go from 'perf record', 'perf trace', etc to 'perf ftrace' just by changing the name of the subcommand. - Prefer new "sched:sched_waking" trace event when it exists in 'perf sched' post processing. - Update POWER9 metrics to utilize other metrics. - Fall back to querying debuginfod if debuginfo not found locally. Miscellaneous: - Sync various kvm headers with kernel sources" * tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits) perf ftrace: Make option description initials all capital letters perf build-ids: Fall back to debuginfod query if debuginfo not found perf bench numa: Remove dead code in parse_nodes_opt() perf stat: Update POWER9 metrics to utilize other metrics perf ftrace: Add change log perf: ftrace: Add set_tracing_options() to set all trace options perf ftrace: Add option --tid to filter by thread id perf ftrace: Add option -D/--delay to delay tracing perf: ftrace: Allow set graph depth by '--graph-opts' perf ftrace: Add support for trace option tracing_thresh perf ftrace: Add option 'verbose' to show more info for graph tracer perf ftrace: Add support for tracing option 'irq-info' perf ftrace: Add support for trace option funcgraph-irqs perf ftrace: Add support for trace option sleep-time perf ftrace: Add support for tracing option 'func_stack_trace' perf tools: Add general function to parse sublevel options perf ftrace: Add option '--inherit' to trace children processes perf ftrace: Show trace column header perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size perf ftrace: Factor out function write_tracing_file_int() ...
2020-08-15Merge tag 'x86-urgent-2020-08-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes and small updates all around the place: - Fix mitigation state sysfs output - Fix an FPU xstate/sxave code assumption bug triggered by Architectural LBR support - Fix Lightning Mountain SoC TSC frequency enumeration bug - Fix kexec debug output - Fix kexec memory range assumption bug - Fix a boundary condition in the crash kernel code - Optimize porgatory.ro generation a bit - Enable ACRN guests to use X2APIC mode - Reduce a __text_poke() IRQs-off critical section for the benefit of PREEMPT_RT" * tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternatives: Acquire pte lock with interrupts enabled x86/bugs/multihit: Fix mitigation reporting when VMX is not in use x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs x86/purgatory: Don't generate debug info for purgatory.ro x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC kexec_file: Correctly output debugging information for the PT_LOAD ELF header kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges x86/crash: Correct the address boundary of function parameters x86/acrn: Remove redundant chars from ACRN signature x86/acrn: Allow ACRN guest to use X2APIC mode
2020-08-15Merge tag 'sched-urgent-2020-08-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Two fixes: fix a new tracepoint's output value, and fix the formatting of show-state syslog printouts" * tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/debug: Fix the alignment of the show-state debug output sched: Fix use of count for nr_running tracepoint
2020-08-15Merge tag 'perf-urgent-2020-08-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes, an expansion of perf syscall access to CAP_PERFMON privileged tools, plus a RAPL HW-enablement for Intel SPR platforms" * tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/rapl: Add support for Intel SPR platform perf/x86/rapl: Support multiple RAPL unit quirks perf/x86/rapl: Fix missing psys sysfs attributes hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration kprobes: Remove show_registers() function prototype perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability
generated by cgit (git 2.34.1) at 2025-09-10 19:13:29 +0000