summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-02-24scsi: qla2xxx: Fix typos in a commentYuichiro Tsuji
Fix typos in a comment. hapens -> happens recommeds -> recommends Signed-off-by: Yuichiro Tsuji <yuichtsu@amazon.com> Link: https://lore.kernel.org/r/20250224075907.2505-1-yuichtsu@amazon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-24scsi: mpt3sas: Fix spelling mistake "receveid" -> "received"Colin Ian King
There is a spelling mistake in a ioc_err message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20250221083253.77496-1-colin.i.king@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-24Merge patch series "mpi3mr: Few Enhancements and minor fixes"Martin K. Petersen
Ranjan Kumar <ranjan.kumar@broadcom.com> says: Few Enhancements and minor fixes of mpi3mr driver. Link: https://lore.kernel.org/r/20250220142528.20837-1-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-24scsi: mpi3mr: Update driver version to 8.13.0.5.50Ranjan Kumar
Update driver version to 8.13.0.5.50 Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20250220142528.20837-5-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-24scsi: mpi3mr: Check admin reply queue from WatchdogRanjan Kumar
Admin reply processing can be called from multiple contexts. The driver uses an atomic flag for synchronization among multiple threads/context for draining the admin replies. Upon entering the admin processing routine, the driver will set the atomic flag and start reply processing. When exiting the routine, the driver resets the flag. However, there is a race condition when one thread (Thread 1) has processed replies and is about to reset the flag but in the meantime few more replies are posted and another thread (Thread 2) is called to process replies. Since the synchronization flag is still set, Thread 2 will return without processing replies and those new replies will not be flushed. Make the watchdog thread monitor cases where admin ISR/poll call returns due to another thread processing admin replies. If such an instance is found, make driver call admin ISR to drain replies (if any). Co-developed-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20250220142528.20837-4-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-24scsi: mpi3mr: Update timestamp only for supervisor IOCsRanjan Kumar
The driver issues the time stamp update command periodically. Even if the command fails with supervisor only IOC Status. Instead check the Non-Supervisor capability bit reported by IOC as part of IOC Facts. Co-developed-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20250220142528.20837-3-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-24scsi: mpi3mr: Update MPI Headers to revision 35Ranjan Kumar
Update MPI Headers to revision 35 Co-developed-by: Prayas Patel <prayas.patel@broadcom.com> Signed-off-by: Prayas Patel <prayas.patel@broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20250220142528.20837-2-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-24Merge patch series "scsi: scsi_debug: Add more tape support"Martin K. Petersen
Kai Mäkisara <Kai.Makisara@kolumbus.fi> says: Currently, the scsi_debug driver can create tape devices and the st driver attaches to those. Nothing much can be done with the tape devices because scsi_debug does not have support for the tape-specific commands and features. These patches add some more tape support to the scsi_debug driver. The end result is simulated drives with a tape having one or two partitions (one partition is created initially). The tape is implemented as fixed number (10 000) of 8-byte units. The first four bytes of a unit contain the type of the unit (data block, filemark or end-of-data mark). If the units is a data block, the first four bytes also contain the block length and the remaining four bytes the first bytes of written data. This allows the user to use tags to see that the read block is what it was supposed to be. The following SCSI operations are added or modified: FORMAT MEDIUM - added LOCATE - added MODE SELECT - modified to allow use without page(s) (just header and block descriptor) - store density and block size - partition page added MODE SENSE - modified to allow use without page(s) (just header and block descriptor) - set density and block size - partition page added READ BLOCK LIMITS - added READ POSITION - added READ - added tape support for READ (6) REWIND - modified to set the tape position SPACE - added START STOP (LOAD) - modified to return New Medium Unit Attention if tape loaded (not according to the standard, but enables testing this UA) WRITE - added tape support for WRITE (6) WRITE FILEMARKS - added Link: https://lore.kernel.org/r/20250213092636.2510-1-Kai.Makisara@kolumbus.fi Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-24Merge patch series "Initial support for RK3576 UFS controller"Martin K. Petersen
Shawn Lin <shawn.lin@rock-chips.com> says: This patchset adds initial UFS controller supprt for RK3576 SoC. Patch 1 is the dt-bindings. Patch 2-4 deal with rpm and spm support in advanced suggested by Ulf. Patch 5 exports two new APIs for host driver. Patch 6 and 7 are the host driver and dtsi support. Link: https://lore.kernel.org/r/1738736156-119203-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-24scsi: arm64: dts: rockchip: Add UFS support for RK3576 SoCShawn Lin
Add ufshc node to rk3576.dtsi, so the board using UFS could enable it. Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Link: https://lore.kernel.org/r/1738736156-119203-8-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-24scsi: ufs: rockchip: Initial support for UFSShawn Lin
RK3576 SoC contains a UFS controller, add initial support for it. The features are: 1. support UFS 2.0 features 2. High speed up to HS-G3 3. 2RX-2TX lanes 4. auto H8 entry and exit Software limitation: 1. HCE procedure: enable controller->enable intr->dme_reset->dme_enable 2. disable unipro timeout values before power mode change [mkp: fix build errors] Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Link: https://lore.kernel.org/r/1738736156-119203-7-git-send-email-shawn.lin@rock-chips.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-24scsi: ufs: core: Export ufshcd_dme_reset() and ufshcd_dme_enable()Shawn Lin
These two APIs will be used by glue driver if they need a different HCE process. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Link: https://lore.kernel.org/r/1738736156-119203-6-git-send-email-shawn.lin@rock-chips.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-24scsi: ufs: dt-bindings: Document Rockchip UFS host controllerShawn Lin
Document Rockchip UFS host controller for RK3576 SoC. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Link: https://lore.kernel.org/r/1738736156-119203-2-git-send-email-shawn.lin@rock-chips.com Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-24pmdomain: rockchip: Fix build errorUlf Hansson
To resolve the build error with undefined reference to `arm_smccc_1_1_get_conduit', let's add a build dependency to HAVE_ARM_SMCCC_DISCOVERY. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 61eeb9678789 ("pmdomain: rockchip: Check if SMC could be handled by TA") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-02-23scsi: scsi_debug: Add support for partitioning the tapeKai Mäkisara
This patch adds support for MEDIUM PARTITION PAGE in MODE SELECT and the FORMAT MEDIUM command for tapes. After these additions, the virtual tape can be partitioned containing either one or two partitions. The POFM flag in the mode page is set, meaning that the FORMAT MEDIUM command must be used to create the partitioning defined in the mode page. Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20250213092636.2510-8-Kai.Makisara@kolumbus.fi Reviewed-by: John Meneghini <jmeneghi@redhat.com> Tested-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-23scsi: scsi_debug: Reset tape setting at device resetKai Mäkisara
Set tape block size, density and compression to default values when the device is reset (either directly or via target, bus or host reset). Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20250213092636.2510-7-Kai.Makisara@kolumbus.fi Reviewed-by: John Meneghini <jmeneghi@redhat.com> Tested-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-23scsi: scsi_debug: Add compression mode page for tapesKai Mäkisara
Add support for compression mode page. The compression status is saved and returned. No UA is generated. Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20250213092636.2510-6-Kai.Makisara@kolumbus.fi Reviewed-by: John Meneghini <jmeneghi@redhat.com> Tested-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-23scsi: scsi_debug: Add read support and update locate for tapesKai Mäkisara
Support for the READ (6) and SPACE (6) commands for tapes based on the previous write patch is added. The LOCATE (10) command is updated to use the written data. Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20250213092636.2510-5-Kai.Makisara@kolumbus.fi Reviewed-by: John Meneghini <jmeneghi@redhat.com> Tested-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-23scsi: scsi_debug: Add write support with block lengths and 4 bytes of dataKai Mäkisara
The tape is implemented as fixed number (10 000) of 8-byte units. The first four bytes of a unit contains the type of the unit (data block, filemark or end-of-data mark). If the units is a data block, the first four bytes contain the block length and the remaining four bytes the first bytes of written data. This allows the user to use tags to see that the read block is what it was supposed to be. The tape can contain two partitions. Initially it is formatted as one partition consisting of all 10 000 units. This patch adds the WRITE(6) command for tapes and the WRITE FILEMARKS (6) command. The REWIND command is updated. Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20250213092636.2510-4-Kai.Makisara@kolumbus.fi Reviewed-by: John Meneghini <jmeneghi@redhat.com> Tested-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-23scsi: scsi_debug: Add READ BLOCK LIMITS and modify LOAD for tapesKai Mäkisara
The changes: - Add READ BLOCK LIMITS (512 - 1048576 bytes) - Make LOAD send New Media UA (not correct by the standard, but makes possible to test also this UA) Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20250213092636.2510-3-Kai.Makisara@kolumbus.fi Reviewed-by: John Meneghini <jmeneghi@redhat.com> Tested-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-23scsi: scsi_debug: First fixes for tapesKai Mäkisara
Patch includes the following: - Enable MODE SENSE/SELECT without actual page (to read/write only the Block Descriptor) - Store the density code and block size in the Block Descriptor (only short version for tapes) - Fix REWIND not to use the wrong page filling function Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi> Link: https://lore.kernel.org/r/20250213092636.2510-2-Kai.Makisara@kolumbus.fi Reviewed-by: John Meneghini <jmeneghi@redhat.com> Tested-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20Merge patch series "Support Multi-frequency scale for UFS"Martin K. Petersen
Ziqi Chen <quic_ziqichen@quicinc.com> says: With OPP V2 enabled, devfreq can scale clocks amongst multiple frequency plans. However, the gear speed is only toggled between min and max during clock scaling. Enable multi-level gear scaling by mapping clock frequencies to gear speeds, so that when devfreq scales clock frequencies we can put the UFS link at the appropraite gear speeds accordingly. This series has been tested on below platforms - sm8550 mtp + UFS3.1 SM8650 MTP + UFS3.1 SM8750 MTP + UFS4.0 Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Link: https://lore.kernel.org/r/20250213080008.2984807-1-quic_ziqichen@quicinc.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20scsi: ABI: sysfs-driver-ufs: Add missing UFS sysfs attributesZiqi Chen
Add UFS driver sysfs attributes clkscale_enable, clkgate_enable and clkgate_delay_ms to this document. Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com> Link: https://lore.kernel.org/r/20250213080008.2984807-9-quic_ziqichen@quicinc.com Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20scsi: ufs: core: Toggle Write Booster during clock scaling base on gear speedCan Guo
During clock scaling, Write Booster is toggled on or off based on whether the clock is scaled up or down. However, with OPP V2 powered multi-level gear scaling, the gear can be scaled amongst multiple gear speeds, e.g., it may scale down from G5 to G4, or from G4 to G2. To provide flexibilities, add a new field for clock scaling such that during clock scaling Write Booster can be enabled or disabled based on gear speeds but not based on scaling up or down. Signed-off-by: Can Guo <quic_cang@quicinc.com> Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com> Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com> Link: https://lore.kernel.org/r/20250213080008.2984807-8-quic_ziqichen@quicinc.com Reviewed-by: Bean Huo <beanhuo@micron.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20scsi: ufs: core: Check if scaling up is required when disable clkscaleZiqi Chen
When disabling clkscale via the clkscale_enable sysfs entry, UFS driver shall perform scaling up once regardless. Check if scaling up is required or not first to avoid repetitive work. Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com> Co-developed-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Can Guo <quic_cang@quicinc.com> Link: https://lore.kernel.org/r/20250213080008.2984807-7-quic_ziqichen@quicinc.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20scsi: ufs: core: Enable multi-level gear scalingCan Guo
With OPP V2 enabled, devfreq can scale clocks amongst multiple frequency plans. However, the gear speed is only toggled between min and max during clock scaling. Enable multi-level gear scaling by mapping clock frequencies to gear speeds, so that when devfreq scales clock frequencies we can put the UFS link at the appropriate gear speeds accordingly. Signed-off-by: Can Guo <quic_cang@quicinc.com> Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com> Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com> Link: https://lore.kernel.org/r/20250213080008.2984807-6-quic_ziqichen@quicinc.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20scsi: ufs: qcom: Implement the freq_to_gear_speed() vopCan Guo
Implement the freq_to_gear_speed() vop to map the unipro core clock frequency to the corresponding maximum supported gear speed. Signed-off-by: Can Guo <quic_cang@quicinc.com> Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com> Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com> Link: https://lore.kernel.org/r/20250213080008.2984807-5-quic_ziqichen@quicinc.com Reviewed-by: Bean Huo <beanhuo@micron.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20scsi: ufs: core: Add a vop to map clock frequency to gear speedCan Guo
Add a vop to map UFS host controller clock frequencies to the corresponding maximum supported UFS high speed gear speeds. During clock scaling, we can map the target clock frequency, demanded by devfreq, to the maximum supported gear speed, so that devfreq can scale the gear to the highest gear speed supported at the target clock frequency, instead of just scaling up/down the gear between the min and max gear speeds. Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com> Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com> Signed-off-by: Can Guo <quic_cang@quicinc.com> Link: https://lore.kernel.org/r/20250213080008.2984807-4-quic_ziqichen@quicinc.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20scsi: ufs: qcom: Pass target_freq to clk scale pre and post changeCan Guo
Instead of only two frequencies, if OPP V2 is used, the UFS devfreq clock scaling may scale the clock among multiple frequencies. In the case of scaling up, the devfreq may decide to scale the clock to an intermediate freq based on load, but the clock scale up pre change operation uses settings for the max clock freq unconditionally. Fix it by passing the target_freq to clock scale up pre change so that the correct settings for the target_freq can be used. In the case of scaling down, the clock scale down post change operation is doing fine, because it reads the actual clock rate to tell freq, but to keep symmetry with clock scale up pre change operation, just use the target_freq instead of reading clock rate. Signed-off-by: Can Guo <quic_cang@quicinc.com> Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com> Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com> Link: https://lore.kernel.org/r/20250213080008.2984807-3-quic_ziqichen@quicinc.com Reviewed-by: Bean Huo <beanhuo@micron.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20scsi: ufs: core: Pass target_freq to clk_scale_notify() vopCan Guo
Instead of only two frequencies, if OPP V2 is used, the UFS devfreq clock scaling may scale the clock among multiple frequencies, so just passing up/down to vop clk_scale_notify() is not enough to cover the intermediate clock freqs between the min and max freqs. Hence pass the target_freq, which will be used in successive commits, to clk_scale_notify() to allow the vop to perform corresponding configurations with regard to the clock freqs. Signed-off-by: Can Guo <quic_cang@quicinc.com> Co-developed-by: Ziqi Chen <quic_ziqichen@quicinc.com> Signed-off-by: Ziqi Chen <quic_ziqichen@quicinc.com> Link: https://lore.kernel.org/r/20250213080008.2984807-2-quic_ziqichen@quicinc.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20Merge patch series "mpt3sas driver udpates"Martin K. Petersen
Shivasharan S <shivasharan.srikanteshwara@broadcom.com> says: This patch series adds support for the MCTP passthrough function over the MPI interface for management commands. Also fix issue related to task management handling during IOCTL timeout. Link: https://lore.kernel.org/r/1739410016-27503-1-git-send-email-shivasharan.srikanteshwara@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20scsi: mpt3sas: update driver version to 52.100.00.00Shivasharan S
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Link: https://lore.kernel.org/r/1739410016-27503-6-git-send-email-shivasharan.srikanteshwara@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20scsi: mpt3sas: Send a diag reset if target reset failsShivasharan S
When an IOCTL times out and driver issues a target reset, if firmware fails the task management elevate the recovery by issuing a diag reset to controller. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Link: https://lore.kernel.org/r/1739410016-27503-5-git-send-email-shivasharan.srikanteshwara@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20scsi: mpt3sas: Report driver capability as part of IOCINFO commandShivasharan S
Add a new capability field to report the MCTP passthrough support to applications. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Link: https://lore.kernel.org/r/1739410016-27503-4-git-send-email-shivasharan.srikanteshwara@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20scsi: mpt3sas: Add support for MCTP Passthrough commandsShivasharan S
The MPI specification defines support for sending MCTP management commands as a passthrough function to the IOC. Add support for driver to discover the IOC capability to support MCTP passthrough function. Driver will support applications and kernel modules to send MPT commands containing the MCTP passthrough request to firmware through an MPI request. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com> Link: https://lore.kernel.org/r/1739410016-27503-3-git-send-email-shivasharan.srikanteshwara@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20scsi: mpt3sas: Update MPI headers to 02.00.62 versionShivasharan S
Updated MPI header files to version 02.00.62. Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Link: https://lore.kernel.org/r/1739410016-27503-2-git-send-email-shivasharan.srikanteshwara@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-20scsi: ufs: qcom: Remove dead code in ufs_qcom_cfg_timers()Bao D. Nguyen
Since 'commit 104cd58d9af8 ("scsi: ufs: qcom: Remove support for host controllers older than v2.0")', some of the parameters passed into the ufs_qcom_cfg_timers() function have become dead code. Clean up ufs_qcom_cfg_timers() function to improve the readability. Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com> Link: https://lore.kernel.org/r/547c484ce80fe3624ee746954b84cae28bd38a09.1739985266.git.quic_nguyenb@quicinc.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-19pmdomain: rockchip: Check if SMC could be handled by TAShawn Lin
Non-existent trusted-firmware could lead to SMC calls into some unset location, that breaks the system. Let's check that it's supported before executing the SMC. Reported-by: Steven Price <steven.price@arm.com> Suggested-by: Heiko Stuebner <heiko@sntech.de> Fixes: 58ebba35ddab ("pmdomain: rockchip: Add smc call to inform firmware") Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/1739926689-151827-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-02-18scsi: mpt3sas: Fix a locking bug in an error pathBart Van Assche
Call mutex_unlock(&ioc->hostdiag_unlock_mutex) once from error paths instead of twice. This patch fixes the following Clang -Wthread-safety errors: drivers/scsi/mpt3sas/mpt3sas_base.c:8085:2: error: mutex 'ioc->hostdiag_unlock_mutex' is not held on every path through here [-Werror,-Wthread-safety-analysis] 8085 | pci_cfg_access_unlock(ioc->pdev); | ^ drivers/scsi/mpt3sas/mpt3sas_base.c:8019:2: note: mutex acquired here 8019 | mutex_lock(&ioc->hostdiag_unlock_mutex); | ^ ./include/linux/mutex.h:171:26: note: expanded from macro 'mutex_lock' 171 | #define mutex_lock(lock) mutex_lock_nested(lock, 0) | ^ drivers/scsi/mpt3sas/mpt3sas_base.c:8085:2: error: mutex 'ioc->hostdiag_unlock_mutex' is not held on every path through here [-Werror,-Wthread-safety-analysis] 8085 | pci_cfg_access_unlock(ioc->pdev); | ^ drivers/scsi/mpt3sas/mpt3sas_base.c:8019:2: note: mutex acquired here 8019 | mutex_lock(&ioc->hostdiag_unlock_mutex); | ^ ./include/linux/mutex.h:171:26: note: expanded from macro 'mutex_lock' 171 | #define mutex_lock(lock) mutex_lock_nested(lock, 0) | ^ drivers/scsi/mpt3sas/mpt3sas_base.c:8087:2: error: releasing mutex 'ioc->hostdiag_unlock_mutex' that was not held [-Werror,-Wthread-safety-analysis] 8087 | mutex_unlock(&ioc->hostdiag_unlock_mutex); | ^ Cc: Ranjan Kumar <ranjan.kumar@broadcom.com> Fixes: c0767560b012 ("scsi: mpt3sas: Reload SBR without rebooting HBA") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250210203936.2946494-3-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-18scsi: mpi3mr: Fix locking in an error pathBart Van Assche
Make all error paths unlock rioc->bsg_cmds.mutex. This patch fixes the following Clang -Wthread-safety errors: drivers/scsi/mpi3mr/mpi3mr_app.c:2835:1: error: mutex 'mrioc->bsg_cmds.mutex' is not held on every path through here [-Werror,-Wthread-safety-analysis] 2835 | } | ^ drivers/scsi/mpi3mr/mpi3mr_app.c:2332:6: note: mutex acquired here 2332 | if (mutex_lock_interruptible(&mrioc->bsg_cmds.mutex)) | ^ ./include/linux/mutex.h:172:40: note: expanded from macro 'mutex_lock_interruptible' 172 | #define mutex_lock_interruptible(lock) mutex_lock_interruptible_nested(lock, 0) | ^ Cc: Sathya Prakash <sathya.prakash@broadcom.com> Fixes: fb231d7deffb ("scsi: mpi3mr: Support for preallocation of SGL BSG data buffers part-2") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250210203936.2946494-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-18scsi: hpsa: Replace deprecated strncpy() with strscpy_pad()Thorsten Blum
strncpy() is deprecated for NUL-terminated destination buffers. Replace memset() and strncpy() with strscpy_pad() to copy the version string and fill the remaining bytes in the destination buffer with NUL bytes. This avoids zeroing the memory before copying the string. Compile-tested only. Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://lore.kernel.org/r/20250213114047.2366-2-thorsten.blum@linux.dev Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-18scsi: hpsa: Remove deprecated and unnecessary strncpy()Thorsten Blum
While replacing strncpy() with strscpy(), Bart Van Assche pointed out that the code occurs inside sysfs write callbacks, which already uses NUL-terminated strings. This allows the string to be passed directly to sscanf() without requiring a temporary copy. Remove the deprecated and unnecessary strncpy() and the corresponding local variables, and pass the buffer buf directly to sscanf(). Replace sscanf() with kstrtoint() to silence checkpatch warnings. Compile-tested only. Link: https://github.com/KSPP/linux/issues/90 Cc: linux-hardening@vger.kernel.org Cc: Kees Cook <kees@kernel.org> Cc: David Laight <david.laight.linux@gmail.com> Suggested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://lore.kernel.org/r/20250214114302.86001-2-thorsten.blum@linux.dev Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-18scsi: ufs: core: Add hba parameter to trace eventsPeter Wang
Include the ufs_hba structure as a parameter in various trace events to provide more context and improve debugging capabilities. Also remove dev_name which can replace by dev_name(hba->dev). Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20250214083026.1177880-1-peter.wang@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-13pmdomain: rockchip: Add smc call to inform firmwareShawn Lin
Inform firmware to keep the power domain on or off. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/1738736156-119203-5-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-02-13pmdomain: core: Introduce dev_pm_genpd_rpm_always_on()Ulf Hansson
For some usecases a consumer driver requires its device to remain power-on from the PM domain perspective during runtime. Using dev PM qos along with the genpd governors, doesn't work for this case as would potentially prevent the device from being runtime suspended too. To support these usecases, let's introduce dev_pm_genpd_rpm_always_on() to allow consumers drivers to dynamically control the behaviour in genpd for a device that is attached to it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/1738736156-119203-4-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-02-13soc: rockchip: add header for suspend mode SIP interfaceShawn Lin
Add ROCKCHIP_SIP_SUSPEND_MODE to pass down parameters to Trusted Firmware in order to decide suspend mode. Currently only add ROCKCHIP_SLEEP_PD_CONFIG which teaches firmware to power down controllers or not. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/1738736156-119203-3-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-02-12scsi: ufs: Constify the third pwr_change_notify() argumentBart Van Assche
The third pwr_change_notify() argument is an input parameter. Make this explicit by declaring it 'const'. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250212213838.1044917-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-12scsi: usb: Rename the RESERVE and RELEASE constantsBart Van Assche
The names RESERVE and RELEASE are not only used in <scsi/scsi_proto.h> but also elsewhere in the kernel: $ git grep -nHE 'define[[:blank:]]*(RESERVE|RELEASE)[[:blank:]]' drivers/input/joystick/walkera0701.c:13:#define RESERVE 20000 drivers/s390/char/tape_std.h:56:#define RELEASE 0xD4 /* 3420 NOP, 3480 REJECT */ drivers/s390/char/tape_std.h:58:#define RESERVE 0xF4 /* 3420 NOP, 3480 REJECT */ Additionally, while the names of the symbolic constants RESERVE_10 and RELEASE_10 include the command length, the command length is not included in the RESERVE and RELEASE names. Address both issues by renaming the RESERVE and RELEASE constants into RESERVE_6 and RELEASE_6 respectively. Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250210205031.2970833-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-12scsi: ufs: core: Critical health conditionAvri Altman
Martin hi, The UFS4.1 standard, released on January 8, 2025, added a new exception event: HEALTH_CRITICAL, which notifies the host of a device's critical health condition. This notification implies that the device is approaching the end of its lifetime based on the amount of performed program/erase cycles. Once an EOL (End-of-Life) exception event is received, we increment a designated member, which is exposed via a sysfs entry. This new entry, will report the number of times a critical health event has been reported by a UFS device. To handle this new sysfs entry, userspace applications can use select(), poll(), or epoll() to monitor changes in the critical_health attribute. The kernel will call sysfs_notify() to signal changes, allowing the userspace application to detect and respond to these changes efficiently. The host can gain further insight into the specific issue by reading one of the following attributes: bPreEOLInfo, bDeviceLifeTimeEstA, bDeviceLifeTimeEstB, bWriteBoosterBufferLifeTimeEst, and bRPMBLifeTimeEst. All those are available for reading via the driver's sysfs entries or through an applicable utility. It is up to userspace to read these attributes if needed. Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20250211065813.58091-1-avri.altman@wdc.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-12scsi: iscsi_tcp: Switch to using the crc32c libraryEric Biggers
Now that the crc32c() library function directly takes advantage of architecture-specific optimizations, it is unnecessary to go through the crypto API. Just use crc32c(). This is much simpler, and it improves performance due to eliminating the crypto API overhead. Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20250207041724.70733-1-ebiggers@kernel.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-07 14:11:46 +0000