summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-06-24drm/panel: simple: Add missing display timing flags for KOE TX26D202VM0BWALiu Ying
KOE TX26D202VM0BWA panel spec indicates the DE signal is active high in timing chart, so add DISPLAY_FLAGS_DE_HIGH flag in display timing flags. This aligns display_timing with panel_desc. Fixes: 8a07052440c2 ("drm/panel: simple: Add support for KOE TX26D202VM0BWA panel") Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240624015612.341983-1-victor.liu@nxp.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240624015612.341983-1-victor.liu@nxp.com
2024-06-24drm/panel: raydium-rm692e5: transition to mipi_dsi wrapped functionsTejas Vipin
Use functions introduced in commit 966e397e4f60 ("drm/mipi-dsi: Introduce mipi_dsi_*_write_seq_multi()") and commit f79d6d28d8fe ("drm/mipi-dsi: wrap more functions for streamline handling") for the raydium-rm692e5 panel. Additionally, the error handling in rm692e5_prepare() is changed to properly power the panel off in the case of a wider range of initialization commands failing than before. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Link: https://lore.kernel.org/r/20240620181051.102173-1-tejasvipin76@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240620181051.102173-1-tejasvipin76@gmail.com
2024-06-24drm/panel: asus-z00t-tm5p5-n35596: transition to mipi_dsi wrapped functionsTejas Vipin
Use functions introduced in commit 966e397e4f60 ("drm/mipi-dsi: Introduce mipi_dsi_*_write_seq_multi()") and commit f79d6d28d8fe ("drm/mipi-dsi: wrap more functions for streamline handling") for the asus-z00t-tm5p5-n35596 panel. Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20240621131648.131667-1-tejasvipin76@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240621131648.131667-1-tejasvipin76@gmail.com
2024-06-24agp: add missing MODULE_DESCRIPTION() macrosJeff Johnson
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/amd64-agp.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/intel-agp.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/intel-gtt.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/sis-agp.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/via-agp.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240603-md-agp-v1-1-9a1582114ced@quicinc.com
2024-06-24drm/i915/psr: Set DP_PSR_SU_REGION_SCANLINE_CAPTURE bit when neededJouni Högander
Setting DP_PSR_SU_REGION_SCANLINE_CAPTURE (Selective Update Region Scan Line Capture Indication in spec) bit was dropped when psr_enable_sink was split to _psr_enable_sink and _panel_replay_enable_sink. Add setting it back. Fixes: 32f0045f905c ("drm/i915/psr: Split enabling sink for PSR and Panel Replay") Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240620103312.903977-1-jouni.hogander@intel.com
2024-06-23Linux 6.10-rc5v6.10-rc5Linus Torvalds
2024-06-23cpu: Fix broken cmdline "nosmp" and "maxcpus=0"Huacai Chen
After the rework of "Parallel CPU bringup", the cmdline "nosmp" and "maxcpus=0" parameters are not working anymore. These parameters set setup_max_cpus to zero and that's handed to bringup_nonboot_cpus(). The code there does a decrement before checking for zero, which brings it into the negative space and brings up all CPUs. Add a zero check at the beginning of the function to prevent this. [ tglx: Massaged change log ] Fixes: 18415f33e2ac4ab382 ("cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE") Fixes: 06c6796e0304234da6 ("cpu/hotplug: Fix off by one in cpuhp_bringup_mask()") Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240618081336.3996825-1-chenhuacai@loongson.cn
2024-06-23octeontx2-pf: Fix coverity and klockwork issues in octeon PF driverRatheesh Kannoth
Fix unintended sign extension and klockwork issues. These are not real issue but for sanity checks. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-23bcachefs: Add missing bch2_journal_do_writes() callKent Overstreet
This fixes a rare deadlock when we're doing an emergency shutdown due to failure to do a journal write. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-23bcachefs: Fix null ptr deref in journal_pins_to_text()Kent Overstreet
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-23irqchip/loongson-liointc: Set different ISRs for different coresHuacai Chen
The liointc hardware provides separate Interrupt Status Registers (ISR) for each core. The current code uses always the ISR of core #0, which works during boot because by default all interrupts are routed to core #0. When the interrupt routing changes in the firmware configuration then this causes interrupts to be lost because they are not configured in the corresponding core. Use the core index to access the correct ISR instead of a hardcoded 0. [ tglx: Massaged changelog ] Fixes: 0858ed035a85 ("irqchip/loongson-liointc: Add ACPI init support") Co-developed-by: Tianli Xiong <xiongtianli@loongson.cn> Signed-off-by: Tianli Xiong <xiongtianli@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240622043338.1566945-1-chenhuacai@loongson.cn
2024-06-23irqchip/loongson-eiointc: Use early_cpu_to_node() instead of cpu_to_node()Huacai Chen
Multi-bridge machines required that all eiointc controllers in the system are initialized, otherwise the system does not boot. The initialization happens on the boot CPU during early boot and relies on cpu_to_node() for identifying the individual nodes. That works when the number of possible CPUs is large enough, but with a command line limit, e.g. "nr_cpus=$N" for kdump, but fails when the CPUs of the secondary nodes are not covered. During early ACPI enumeration all CPU to node mappings are recorded up to CONFIG_NR_CPUS. These are accessible via early_cpu_to_node() even in the case that "nr_cpus=N" truncates the number of possible CPUs and only provides the possible CPUs via cpu_to_node() translation. Change the node lookup in the driver to use early_cpu_to_node() so that even with a limitation on the number of possible CPUs all eointc instances are initialized. This can't obviously cure the case where CONFIG_NR_CPUS is too small. [ tglx: Massaged changelog ] Fixes: 64cc451e45e1 ("irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent") Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240623034113.1808727-1-chenhuacai@loongson.cn
2024-06-23Merge tag 'i2c-for-6.10-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "The core gains placeholders for recently added functions when CONFIG_I2C is not defined as well documentation fixes to start using inclusive terminology. The drivers get paths in DT bindings fixed as well as proper interrupt handling for the ocores driver" * tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: docs: i2c: summary: be clearer with 'controller/target' and 'adapter/client' pairs docs: i2c: summary: document 'local' and 'remote' targets docs: i2c: summary: document use of inclusive language docs: i2c: summary: update speed mode description docs: i2c: summary: update I2C specification link docs: i2c: summary: start sentences consistently. i2c: Add nop fwnode operations i2c: ocores: set IACK bit after core is enabled dt-bindings: i2c: google,cros-ec-i2c-tunnel: correct path to i2c-controller schema dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema
2024-06-23Merge tag '6.10-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull smb client fixes from Steve French: "Five smb3 client fixes - three nets/fiolios cifs fixes - fix typo in module parameters description - fix incorrect swap warning" * tag '6.10-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Move the 'pid' from the subreq to the req cifs: Only pick a channel once per read request cifs: Defer read completion cifs: fix typo in module parameter enable_gcm_256 cifs: drop the incorrect assertion in cifs_swap_rw()
2024-06-23Merge tag 'fixes-2024-06-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock fix from Mike Rapoport: "Fix fragility in checks for unset node ID. Use numa_valid_node() function to verify that nid is a valid node ID instead of inconsistent comparisons with either NUMA_NO_NODE or MAX_NUMNODES" * tag 'fixes-2024-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock: use numa_valid_node() helper to check for invalid node ID
2024-06-23Merge tag 'mips-fixes_6.10_2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fix lseek in o32 compat mode - fix for microMIPS MT ASE helpers * tag 'mips-fixes_6.10_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: fix compat_sys_lseek syscall MIPS: mipsmtregs: Fix target register for MFTC0
2024-06-23Merge tag 'x86_urgent_for_v6.10_rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - An ARM-relevant fix to not free default RMIDs of a resource control group - A randconfig build fix for the VMware virtual GPU driver * tag 'x86_urgent_for_v6.10_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/resctrl: Don't try to free nonexistent RMIDs drm/vmwgfx: Fix missing HYPERVISOR_GUEST dependency
2024-06-23Merge tag 'powerpc-6.10-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Prevent use-after-free in 64-bit KVM VFIO - Add generated Power8 crypto asm to .gitignore Thanks to Al Viro and Nathan Lynch. * tag 'powerpc-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S HV: Prevent UAF in kvm_spapr_tce_attach_iommu_group() powerpc/crypto: Add generated P8 asm to .gitignore
2024-06-23bcachefs: Add missing recalc_capacity() callKent Overstreet
This fixes filesystem size not changing on device removal. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-06-23ice: Rebuild TC queues on VSI queue reconfigurationJan Sokolowski
TC queues needs to be correctly updated when the number of queues on a VSI is reconfigured, so netdev's queue and TC settings will be dynamically adjusted and could accurately represent the underlying hardware state after changes to the VSI queue counts. Fixes: 0754d65bd4be ("ice: Add infrastructure for mqprio support via ndo_setup_tc") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-23dt-bindings: net: fman: remove ptp-timer from required listFrank Li
IEEE1588(ptp) is optional feature for network. Remove it from required list to fix below CHECK_DTBS warning. arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: ethernet@f0000: 'ptp-timer' is a required property Signed-off-by: Frank Li <Frank.Li@nxp.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-23Merge branch 'phy-microchip-ksz-9897-errata'David S. Miller
Enguerrand de Ribaucourt says: ==================== Handle new Microchip KSZ 9897 Errata These patches implement some suggested workarounds from the Microchip KSZ 9897 Errata [1]. [1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9897R-Errata-DS80000758.pdf --- v7: - use dev_crit_once instead of dev_crit_ratelimited - add a comment to help users understand the consequences of half-duplex errors v6: https://lore.kernel.org/netdev/20240614094642.122464-1-enguerrand.de-ribaucourt@savoirfairelinux.com/ - remove KSZ9897 phy_id workaround (was a configuration issue) - use macros for checking link down in monitoring function - check if VLAN is enabled before monitoring resources v5: https://lore.kernel.org/all/20240604092304.314636-1-enguerrand.de-ribaucourt@savoirfairelinux.com/ - use macros for bitfields - rewrap comments - check ksz_pread* return values - fix spelling mistakes - remove KSZ9477 suspend/resume deletion patch v4: https://lore.kernel.org/all/20240531142430.678198-1-enguerrand.de-ribaucourt@savoirfairelinux.com/ - Rebase on net/main - Add Fixes: tags to the patches - reverse x-mas tree order - use pseudo phy_id instead of match_phy_device v3: https://lore.kernel.org/all/20240530102436.226189-1-enguerrand.de-ribaucourt@savoirfairelinux.com/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-23net: dsa: microchip: monitor potential faults in half-duplex modeEnguerrand de Ribaucourt
The errata DS80000754 recommends monitoring potential faults in half-duplex mode for the KSZ9477 family. half-duplex is not very common so I just added a critical message when the fault conditions are detected. The switch can be expected to be unable to communicate anymore in these states and a software reset of the switch would be required which I did not implement. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-23net: dsa: microchip: use collision based back pressure modeEnguerrand de Ribaucourt
Errata DS80000758 states that carrier sense back pressure mode can cause link down issues in 100BASE-TX half duplex mode. The datasheet also recommends to always use the collision based back pressure mode. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by: Woojung Huh <Woojung.huh@microchip.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-23net: phy: micrel: add Microchip KSZ 9477 to the device tableEnguerrand de Ribaucourt
PHY_ID_KSZ9477 was supported but not added to the device table passed to MODULE_DEVICE_TABLE. Fixes: fc3973a1fa09 ("phy: micrel: add Microchip KSZ 9477 Switch PHY support") Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-23netlink: specs: Fix pse-set command attributesKory Maincent
Not all PSE attributes are used for the pse-set netlink command. Select only the ones used by ethtool. Fixes: f8586411e40e ("netlink: specs: Expand the pse netlink command with PoE interface") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-23accel/habanalabs: gradual sleep in polling memory macroDidi Freiman
It’s better to avoid long sleeps right from the beginning of the polling since the data may be available much sooner than the sleep period. Because polling host memory is inexpensive, this change gradually increases the sleep time up to the user-requested period. Signed-off-by: Didi Freiman <dfreiman@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: move heartbeat work initialization to early initTomer Tayar
The device heartbeat work is currently initialized at device_heartbeat_schedule() which is called at the end of hl_device_init(). However hl_device_init() can fail at a previous step, and in such a case, a subsequent call to hl_device_fini() will lead to calling cleanup_resources() and accessing this work uninitialized. As there is no real need to re-initialize this work every time it is rescheduled, move this initialization to device_early_init() to be done once and early enough. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: print timestamp of last PQ heartbeat on EQ heartbeat failureTomer Tayar
The test packet which is sent to FW for the PQ heartbeat is used also as the trigger in FW to send the EQ heartbeat event. Add the time of the last sent packet to the debug info which is printed upon a EQ heartbeat failure. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: dump the EQ entries headers on EQ heartbeat failureTomer Tayar
Add a dump of the EQ entries headers upon a EQ heartbeat failure. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: revise print on EQ heartbeat failureTomer Tayar
Don't print the "previous EQ index" value in case of a EQ heartbeat failure, because it is incremented along with the EQ CI and therefore redundant. In addition, as the CPU-CP PI is zeroed when it reaches a value that is twice the queue size, add a value of the CI with a similar wrap around, to make it easier to compare the values. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: add more info upon cpu pkt timeoutFarah Kassabri
In order to have better debuggability upon encountering FW issues, We are adding additional info once CPU packet timeout expires. Signed-off-by: Farah Kassabri <fkassabri@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: additional print in device-in-use infoIlia Levi
When device release triggers a hard reset, there is a printout of the cause. Currently listed causes (that increment context refcount) are active command submissions and exported DMA buffer objects. In any other case, the printout emits "unknown reason". We identify and print another reason - allocated command buffers. Signed-off-by: Ilia Levi <illevi@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23MAINTAINERS: Change habanalabs maintainer and git repo pathOded Gabbay
Because I left habana, Ofir Bitton is now the habanalabs driver maintainer. The git repo also changed location to the Habana GitHub website. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalbs/gaudi2: reduce interrupt count to 128Ofir Bitton
Some systems allow a maximum number of 128 MSI-X interrupts. Hence we reduce the interrupt count to 128 instead of 512. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: disable EQ interrupt after disabling pciTal Cohen
When sending disable pci msg towards firmware, there is a possibility that an EQ packet is already pending, disabling EQ interrupt will prevent this from happening. The interrupt will be re-enabled after reset. Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: change the heartbeat scheduling pointFarah Kassabri
Currently we schedule the heartbeat thread at late init, only then we set the INTS_REGISTER packet which enables events to be received from firmware. Init may take some time and we want to give firmware 2 full cycles of heartbeat thread after it received INTS_REGISTER. The patch will move the heartbeat thread scheduling to be after driver is done with all initializations. Signed-off-by: Farah Kassabri <fkassabri@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs/gaudi2: unsecure edma max outstanding registerRakesh Ughreja
Netowrk EDMAs uses more outstanding transfers so this needs to be programmed by EDMA firmware. Signed-off-by: Rakesh Ughreja <rughreja@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: remove timestamp registration debug printsOfir Bitton
There are several timestamp registration debug prints which spams the kernel log whenever dyn debug is enabled. Remove those prints. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: add cpld ts cpld_timestamp cpucpVitaly Margolin
Add cpld_timestamp field to cpucp_info structure and return cpld timestamp as part of cpld version Signed-off-by: Vitaly Margolin <vmargolin@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: add a common handler for clock change eventsTomer Tayar
As the new dynamic EQ includes clock change events which are common and not ASIC-specific, add a common handler for these events. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: use device-name directory in debugfs-driver-habanalabsTomer Tayar
The device debugfs directory was modified to be named as the parent device name. Update the description of 'mmu' and 'mmu_error' to use the new path. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs/gaudi2: add GAUDI2D revision supportFarah Kassabri
Gaudi2 with PCI revision ID with the value of '4' represents Gaudi2D device and should be detected and initialized as Gaudi2. Signed-off-by: Farah Kassabri <fkassabri@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: move hl_eq_heartbeat_event_handle() to common codeTomer Tayar
hl_eq_heartbeat_event_handle() doesn't have ASIC specific code, and therefore can be moved from Gaudi2-only code to common code, and possibly used for other ASICs. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: add an EQ size ASIC propertyTomer Tayar
Future supported ASICs might use the dynamic EQ mechanism with the firmware, and in that case the EQ size won't be equal to the default HL_EQ_SIZE_IN_BYTES value. Add an ASIC property to enable overriding this value. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: separate nonce from max_size in cpucp_packet structDani Liberman
In struct cpucp_packet both nonce and data_max_size members are in an union overlapping each other. This is a problem as they both are used in attestation and info_signed packets. The solution here is to move the nonce member to a different union under the same structure. Signed-off-by: Dani Liberman <dliberman@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs/gaudi2: assume hard-reset by FW upon MC SEI severe errorTomer Tayar
FW initiates a hard reset upon an MC SEI severe error. Align the driver to expect this reset and avoid accessing the device until the reset is done. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs/gaudi2: revise return value handling in ↵Tomer Tayar
gaudi2_hbm_sei_handle_read_err() The return value in gaudi2_hbm_sei_handle_read_err() is boolean and not a bitmask, so there is need for "|= true". In addition, rename the 'rc' variable, as no "return code" is returned here but an indication if a hard reset is required. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs/gaudi2: align interrupt names to tableAriel Suller
when reporting tpc events, the dcore and tpc in dcore should be reported and propagated, and not the generatl tpc number Signed-off-by: Ariel Suller <asuller@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
2024-06-23accel/habanalabs: check for errors after preboot is readyFarah Kassabri
Driver should check and report any fatal errors detected by preboot, before it attempts to load the boot fit. Some errors may cause the driver to stop the boot process and mark the device as unusable. This check will allow the driver to fail and print the error reported by preboot and skip the time wasting attempt of trying to load the boot fit, which will fail due to the error. Signed-off-by: Farah Kassabri <fkassabri@habana.ai> Reviewed-by: Ofir Bitton <obitton@habana.ai> Signed-off-by: Ofir Bitton <obitton@habana.ai>
generated by cgit (git 2.34.1) at 2025-09-16 16:12:56 +0000