summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-02-14Merge branches 'cma', 'cxgb4', 'iser', 'misc', 'mlx4', 'mlx5', 'nes', ↵Roland Dreier
'ocrdma', 'qib' and 'usnic' into for-next
2014-02-14RDMA/ocrdma: Fix load time panic during GID table initDevesh Sharma
We should use rdma_vlan_dev_real_dev() instead of using vlan_dev_real_dev() when building the GID table for a vlan interface. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14RDMA/ocrdma: Fix traffic class shiftDevesh Sharma
Use correct value for obtaining traffic class from device response for Query QP request. Signed-off-by: Devesh Sharma <devesh.sharma@emulex.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14IB/iser: Fix use after free in iser_snd_completion()Dan Carpenter
We use "tx_desc" again after we free it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14IB/iser: Avoid dereferencing iscsi_iser conn object when not bound to iser ↵Roi Dayan
connection Fix a possible NULL pointer dereference in disconnection flow. This can happen if the target disconnected/rejected the connection request, e.g before the binding stage between iscsi connection to the transport connection. Signed-off-by: Alex Tabachnik <alext@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14IB/usnic: Fix smatch endianness errorUpinder Malhi
Error reported at http://marc.info/?l=linux-rdma&m=138995755801039&w=2 Fix short to int cast for big endian systems. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-14arm64: KVM: Add VGIC device control for arm64Christoffer Dall
This fixes the build breakage introduced by c07a0191ef2de1f9510f12d1f88e3b0b5cd8d66f and adds support for the device control API and save/restore of the VGIC state for ARMv8. The defines were simply missing from the arm64 header files and uaccess.h must be implicitly imported from somewhere else on arm. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-02-14x86/efi: Check status field to validate BGRT headerMatt Fleming
Madper reported seeing the following crash, BUG: unable to handle kernel paging request at ffffffffff340003 IP: [<ffffffff81d85ba4>] efi_bgrt_init+0x9d/0x133 Call Trace: [<ffffffff81d8525d>] efi_late_init+0x9/0xb [<ffffffff81d68f59>] start_kernel+0x436/0x450 [<ffffffff81d6892c>] ? repair_env_string+0x5c/0x5c [<ffffffff81d68120>] ? early_idt_handlers+0x120/0x120 [<ffffffff81d685de>] x86_64_start_reservations+0x2a/0x2c [<ffffffff81d6871e>] x86_64_start_kernel+0x13e/0x14d This is caused because the layout of the ACPI BGRT header on this system doesn't match the definition from the ACPI spec, and so we get a bogus physical address when dereferencing ->image_address in efi_bgrt_init(). Luckily the status field in the BGRT header clearly marks it as invalid, so we can check that field and skip BGRT initialisation. Reported-by: Madper Xie <cxie@redhat.com> Suggested-by: Toshi Kani <toshi.kani@hp.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-02-14EDAC: Correct workqueue setup pathBorislav Petkov
We're using edac_mc_workq_setup() both on the init path, when we load an edac driver and when we change the polling period (edac_mc_reset_delay_period) through /sys/.../edac_mc_poll_msec. On that second path we don't need to init the workqueue which has been initialized already. Thanks to Tejun for workqueue insights. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com Cc: <stable@vger.kernel.org>
2014-02-14EDAC: Poll timeout cannot be zero, p2Borislav Petkov
Sanitize code even more to accept unsigned longs only and to not allow polling intervals below 1 second as this is unnecessary and doesn't make much sense anyway for polling errors. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1391457913-881-1-git-send-email-prarit@redhat.com Cc: Doug Thompson <dougthompson@xmission.com> Cc: <stable@vger.kernel.org>
2014-02-14x86/efi: Fix 32-bit falloutBorislav Petkov
We do not enable the new efi memmap on 32-bit and thus we need to run runtime_code_page_mkexec() unconditionally there. Fix that. Reported-and-tested-by: Lejun Zhu <lejun.zhu@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-02-14video: Kconfig: Allow more broad selection of the imxfb framebuffer driver.Denis Carikli
Without that patch, a user can't select the imxfb driver when the i.MX25 and/or the i.MX27 device tree board are selected and that no boards that selects IMX_HAVE_PLATFORM_IMX_FB are compiled in. Cc: Eric Bénard <eric@eukrea.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Denis Carikli <denis@eukrea.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-02-14video: exynos: Fix S6E8AX0 LCD driver build errorSachin Kamat
Enable S6E8AX0 LCD driver only if LCD_CLASS_DEVICE is a built-in driver. Else we get the following errors due to missing symbols: drivers/built-in.o: In function `s6e8ax0_probe': :(.text+0x51aec): undefined reference to `lcd_device_register' :(.text+0x51c44): undefined reference to `lcd_device_unregister' Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-02-14Merge branch 'bcmgenet'David S. Miller
Florian Fainelli says: ==================== Support for the Broadcom GENET driver This patchset adds support for the Broadcom GENET Gigabit Ethernet MAC controller. This controller is found on the Broadcom BCM7xxx Set Top Box System-on-a-chips. Changes since v4: - add dependency on CONFIG_OF Changes since v3: - fixed Kconfig dependency on FIXED_PHY Changes since v2: - dropped the patch that adds an "internal" phy-mode ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14MAINTAINERS: add entry for the Broadcom GENET driverFlorian Fainelli
Add myself as a maintainer of the Broadcom GENET driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14Documentation: add Device tree bindings for Broadcom GENETFlorian Fainelli
This patch adds the Device Tree bindings for the Broadcom GENET Gigabit Ethernet controller. A bunch of examples are provided to illustrate the versatile aspect of the hardare. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14net: bcmgenet: hook into the build systemFlorian Fainelli
This patch adds a new configuration symbol: CONFIG_BCMGENET which allows us to build the Broadcom GENET driver and hook the driver files into the build system. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14net: bcmgenet: add MDIO routinesFlorian Fainelli
This patch adds support for configuring the port multiplexer hardware which resides in front of the GENET Ethernet MAC controller. This allows us to support: - internal PHYs (using drivers/net/phy/bcm7xxx.c) - MoCA PHYs which are an entirely separate hardware block not covered here - external PHYs and switches Note that MoCA and switches are currently supported using the emulated "fixed PHY" driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14net: bcmgenet: add main driver fileFlorian Fainelli
This patch adds the BCMGENET main driver file which supports the following: - GENET hardware from V1 to V4 - support for reading the UniMAC MIB counters statistics - support for the 5 transmit queues - support for RX/TX checksum offload and SG Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14net: bcmgenet: add driver definitions and private structureFlorian Fainelli
This patchs adds the bcmgenet.h header file which contains all the hardware definitions for the GENETv1 to v4 hardware blocks as well as the driver private structure and MIB counters. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14net: phy: add Broadcom BCM7xxx internal PHY driverFlorian Fainelli
This patch adds support for the Broadcom BCM7xxx Set Top Box SoCs internal PHYs. This driver supports the following generation of SoCs: - BCM7366, BCM7439, BCM7445 (28nm process) - all 40nm and 65nm (older MIPS-based SoCs) The PHYs on these SoCs require a bunch of workarounds to operate correctly, both during configuration time and at suspend/resume time, the driver handles that for us. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14net: phy: broadcom: extract register definitionsFlorian Fainelli
The Broadcom BCM54xx register definitions are shared between BCM54xx and BCM7xx internal PHYs for which we are adding support. Extract these register definitions and put them in include/linux/brcmphy.h for use by the BCM7xxx internal PHY driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14net: phy: update port type for MoCA PHYsFlorian Fainelli
MoCA PHYs are using coaxial (BNC-like) connectors, update the transceiver port type when replying to ethtool. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14net: phy: add MoCA PHY typeFlorian Fainelli
Some Ethernet MACs are connected to a MoCA PHY which will handle the low-level job of sending Ethernet frames on the coaxial cable, these Ethernet MACs need to know about it to be properly configured. Add a new PHY mode "moca" and update the Device Tree parsing logic to look for it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14sch_netem: replace magic numbers with enumerate in GE modelYang Yingliang
Replace some magic numbers which describe states of GE model loss generator with enumerate. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14sch_netem: change some func's param from "struct Qdisc *" to "struct ↵Yang Yingliang
netem_sched_data *" In netem_change(), we have already get "struct netem_sched_data *q". Replace params of get_correlation() and other similar functions with "struct netem_sched_data *q". Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14sch_netem: return errcode before setting paramsYang Yingliang
get_dist_table() and get_loss_clg() may be failed. These two functions should be called after setting the members of qdisc_priv(sch), or it will break the old settings while either of them is failed. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14ipv4: ipconfig.c: add parentheses in an if statementFX Le Bail
Even if the 'time_before' macro expand with parentheses, the look is bad. Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13IB/mlx5: Remove dependency on X86Eli Cohen
Remove Kconfig dependency of mlx5_ib/mlx5_core on X86, since there is no such dependency in reality. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13mlx5: Add include of <linux/slab.h> because of kzalloc()/kfree() useRoland Dreier
On some architectures (for example, arm), we don't end up indirectly pulling in the declaration of kzalloc() and kfree(), and so building anything that includes <linux/mlx5/driver.h> breaks. Fix this by adding an explicit include to get the declaration. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13hwmon: (ntc_thermistor) Avoid math overflowDoug Anderson
The ntc thermistor code was doing math whose temporary result might have overflowed 32-bits. We need some casts in there to make it safe. In one example I found: - pullup_uV: 1800000 - result of iio_read_channel_raw: 3226 - 1800000 * 3226 => 0x15a1cbc80 Signed-off-by: Doug Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-02-13net:phy:dp83640: Move all HW initialization to dp83640_config_initStefan Sørensen
phy_init_hw not does a full PHY reset after the driver probe has finished, so any hw initialization done in the probe will be lost. Part of the timestamping functionality of the dp83640 is set up in the probe and with that lost, enabling timestamping will cause a PHY lockup, requiring a hard reset / power cycle to recover. This patch moves all the HW initialization in dp83640_probe to dp83640_config_init. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13drivers: net: cpsw: fix buggy loop conditionHeiko Schocher
Commit 0cd8f9cc0654c06adde353c6532114c5f53a18e8 ("drivers: net: cpsw: enable promiscuous mode support") Enable promiscuous mode support for CPSW. Introduced a crash on an am335x based board (similiar to am335x-evm). Reason is buggy end condition in for loop in cpsw_set_promiscious() for (i = 0; i <= priv->data.slaves; i++) should be for (i = 0; i < priv->data.slaves; i++) Fix this ... Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Daniel Mack <zonque@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Markus Pargmann <mpa@pengutronix.de> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13vhost: fix a theoretical race in device cleanupMichael S. Tsirkin
vhost_zerocopy_callback accesses VQ right after it drops a ubuf reference. In theory, this could race with device removal which waits on the ubuf kref, and crash on use after free. Do all accesses within rcu read side critical section, and synchronize on release. Since callbacks are always invoked from bh, synchronize_rcu_bh seems enough and will help release complete a bit faster. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13vhost: fix ref cnt checking deadlockMichael S. Tsirkin
vhost checked the counter within the refcnt before decrementing. It really wanted to know that it is the one that has the last reference, as a way to batch freeing resources a bit more efficiently. Note: we only let refcount go to 0 on device release. This works well but we now access the ref counter twice so there's a race: all users might see a high count and decide to defer freeing resources. In the end no one initiates freeing resources until the last reference is gone (which is on VM shotdown so might happen after a looooong time). Let's do what we probably should have done straight away: switch from kref to plain atomic, documenting the semantics, return the refcount value atomically after decrement, then use that to avoid the deadlock. Reported-by: Qin Chuanyu <qinchuanyu@huawei.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13USB2NET: Fix Default to 'y' for SR9800 Device Driver, setting to 'n'Liu Junliang
Signed-off-by: Liu Junliang <liujunliang_ljl@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13USB2NET: SR9800: use %zu for size_tJingoo Han
Use %zu for size_t in order to avoid the following build warning in printks. drivers/net/usb/sr9800.c: In function 'sr9800_bind' drivers/net/usb/sr9800.c:826:2: warning: format '%ld' expects argument of type 'long int' but argument 5 has type 'size_t' [-Wformat] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13ipv4: ip_forward: perform skb->pkt_type check at the beginningDenis Kirjanov
Packets which have L2 address different from ours should be already filtered before entering into ip_forward(). Perform that check at the beginning to avoid processing such packets. Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13net: remove unnecessary return'sstephen hemminger
One of my pet coding style peeves is the practice of adding extra return; at the end of function. Kill several instances of this in network code. I suppose some coccinelle wizardy could do this automatically. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13net: sched: Cleanup PIE commentsVijay Subramanian
Fix incorrect comment reported by Norbert Kiesel. Edit another comment to add more details. Also add references to algorithm (IETF draft and paper) to top of file. Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> CC: Mythili Prabhu <mysuryan@cisco.com> CC: Norbert Kiesel <nkiesel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13net: cpsw: catch of_get_phy_mode failing and propagate errorUwe Kleine-König
It's wrong if the device tree doesn't provide a phy-mode property for the cpsw slaves as it is documented to be required in Documentation/devicetree/bindings/net/cpsw.txt. Anyhow it's nice to catch that problem, still more as it used to work without this property up to commit 388367a5a9fb (drivers: net: cpsw: use cpsw-phy-sel driver to configure phy mode) which is in v3.13-rc1. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13net: qmi_wwan: add support for Cinterion PXS8 and PHS8Aleksander Morgado
When the PXS8 and PHS8 devices show up with PID 0x0053 they will expose both a QMI port and a WWAN interface. CC: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> CC: Christian Schmiedl <christian.schmiedl@gemalto.com> CC: Nicolaus Colberg <nicolaus.colberg@gemalto.com> CC: David McCullough <david.mccullough@accelecon.com> Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13tcp: remove unused min_cwnd member of tcp_congestion_opsStanislav Fomichev
Commit 684bad110757 "tcp: use PRR to reduce cwin in CWR state" removed all calls to min_cwnd, so we can safely remove it. Also, remove tcp_reno_min_cwnd because it was only used for min_cwnd. Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13be2net: refactor multi-channel config code for Skyhawk-R chipVasundhara Volam
Currently multi-channel configuration is read via the QUERY_FW_CONFIG cmd. This method has been deprecated by the Skyhawk-R FW. Instead, GET_PROFILE_CONFIG::port-desc must be used to query this configuration. This patch also: a) introduces a few macros to identify certain categories of multi-channel configs 2) re-factors the be_cmd_set_profile_config() code to be able to read any kind of desc (and not just the nic-desc.) Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13be2net: Update copyright yearVasundhara Volam
Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13be2net: Log a kernel message when UE is detected in BE & SkyhawkSomnath Kotur
This patch logs a kernel message when a HW error(SLIPORT_ERROR in Lancer and UE in BEx/Skyhawk) is detected. The log message for BE3 was missing earlier. This patch also refactors the code by segregating error-detection and reporting code for Lancer and BEx/SH. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13Merge tag 'linux-can-fixes-for-3.14-20140212' of ↵David S. Miller
git://gitorious.org/linux-can/linux-can linux-can-fixes-for-3.14-20140212 Marc Kleine-Budde says: ==================== this is a pull request with one patch for net/master, for the current release cycle. Olivier Sobrie noticed and fixed that the kvaser_usb driver doesn't check the number of channels value from the hardware, which may result in writing over the bounds of an array in the driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13Merge tag 'linux-can-next-for-3.15-20140212' of ↵David S. Miller
git://gitorious.org/linux-can/linux-can-next linux-can-next-for-3.15-20140212 Marc Kleine-Budde says: ==================== this is a pull request of eight patches for net-next/master. Florian Vaussard contributed a series that merged the sja1000 of_platform into the platform driver. The of_platform driver is finally removed. Stephane Grosjean supplied a patch to allocate CANFD skbs. In a patch by Uwe Kleine-König another missing copyright information was added to a userspace header. And a patch by Yoann DI RUZZA that adds listen only mode to the at91_can driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13socket: replace some printk with pr_*Yang Yingliang
Prefer pr_*(...) to printk(KERN_* ...). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13sh_eth: use ETH_ZLEN instead of home-grown #defineSergei Shtylyov
The driver #define's and uses ETHERSMALL macro for the minimum Ethernet frame size for which we have a standard macro ETH_ZLEN. Use the latter instead of the home-grown one. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 01:30:00 +0000