| Age | Commit message (Collapse) | Author |
|---|
|
- Quirk Intel DG2 ASPM L1 acceptable latency to be unlimited. The device
advertises that it can only tolerate 1us, which means L1 is rarely if
ever used (Mika Westerberg)
* pci/aspm:
PCI/ASPM: Make Intel DG2 L1 acceptable latency unlimited
|
|
Add support for sc7280-specific clock and reset definitions.
Link: https://lore.kernel.org/r/20220506152107.1527552-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
|
|
Instead of specifying the enum of possible reg-names, specify them
explicitly. This allows us to specify which chipsets need the "atu"
regions and which do not. Also it clearly describes which platforms
enumerate PCIe cores using the dbi region and which use parf region for
that.
Link: https://lore.kernel.org/r/20220506152107.1527552-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
|
|
On MSM8996/APQ8096 platforms the PCIe controller doesn't have any
resets. So move the requirement stanza under the corresponding if
condition.
Link: https://lore.kernel.org/r/20220506152107.1527552-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
|
|
Changes to the schema:
- Fixed the ordering of clock-names/reset-names according to
the dtsi files.
- Mark vdda-supply as required only for apq/ipq8064 (as it was marked
as generally required in the txt file).
Changes to examples:
- Inline clock and reset numbers rather than including dt-bindings
files because of conflicts between the headers
- Split ranges and reg properties to follow current practice
- Change -gpio to -gpios
- Update IRQ flags to LEVEL_HIGH rater than NONE
- Removed extra "snps,dw-pcie" compatibility.
Note: while it was not clearly described in text schema, the majority of
Qualcomm platforms follow the snps,dw-pcie schema and use two
compatibility strings in the DT files: platform-specific one and a
fallback to the generic snps,dw-pcie one. However the platform itself is
not compatible with the snps,dw-pcie interface, so we are going to
remove it.
Link: https://lore.kernel.org/r/20220506152107.1527552-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
|
|
Undo the PHY initialisation (e.g. balance runtime PM) if host
initialisation fails during probe.
Link: https://lore.kernel.org/r/20220401133854.10421-3-johan+linaro@kernel.org
Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # 4.5
|
|
Drop the leftover pm_runtime_disable() calls from the late probe error
paths that would, for example, prevent runtime PM from being reenabled
after a probe deferral.
Link: https://lore.kernel.org/r/20220401133854.10421-2-johan+linaro@kernel.org
Fixes: 6e5da6f7d824 ("PCI: qcom: Fix error handling in runtime PM support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # 4.20
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Fix a clock imbalance introduced by ed8cc3b1fc84 ("PCI: qcom: Add support
for SDM845 PCIe controller"), which enables the pipe clock both in init()
and in post_init() but only disables in post_deinit().
Note that the pipe clock was also never disabled in the init() error
paths and that enabling the clock before powering up the PHY looks
questionable.
Link: https://lore.kernel.org/r/20220401133351.10113-1-johan+linaro@kernel.org
Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: stable@vger.kernel.org # 5.6
|
|
The PCIe IP (rev 1.5.0) on SM8150 SoC is similar to the one used on
SM8250. Add SM8150 support, reusing the members of ops_1_9_0.
Link: https://lore.kernel.org/r/20220326060810.1797516-3-bhupesh.sharma@linaro.org
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
|
|
Document the PCIe DT bindings for SM8150 SoC. The PCIe IP is similar to
the one used on SM8250.
Link: https://lore.kernel.org/r/20220326060810.1797516-2-bhupesh.sharma@linaro.org
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"MTD core changes:
- Call of_platform_populate() for MTD partitions
- Check devicetree alias for index
- mtdoops:
- Add a timestamp to the mtdoops header.
- Create a header structure for the saved mtdoops.
- Fix the size of the header read buffer.
- mtdblock: Warn if opened on NAND
- Bindings:
- reserved-memory: Support MTD/block device
- jedec,spi-nor: remove unneeded properties
- Extend fixed-partitions binding
- Add Sercomm (Suzhou) Corporation vendor prefix
MTD driver changes:
- st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove()
- phram:
- Allow cached mappings
- Allow probing via reserved-memory
- maps: ixp4xx: Drop driver
- bcm47xxpart: Print correct offset on read error
CFI driver changes:
- Rename chip_ready variables
- Add S29GL064N ID definition
- Use chip_ready() for write on S29GL064N
- Move and rename chip_check/chip_ready/chip_good_for_write
NAND core changes:
- Print offset instead of page number for bad blocks
Raw NAND controller drivers:
- Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe()
- CS553X: simplify the return expression of cs553x_write_ctrl_byte()
- Davinci: Remove redundant unsigned comparison to zero
- Denali: Use managed device resources
- GPMI:
- Add large oob bch setting support
- Rename the variable ecc_chunk_size
- Uninline the gpmi_check_ecc function
- Add strict ecc strength check
- Refactor BCH geometry settings function
- Intel: Fix possible null-ptr-deref in ebu_nand_probe()
- MPC5121: Check before clk_disable_unprepare() not needed
- Mtk:
- MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
- Also parse the default nand-ecc-engine property if available
- Make mtk_ecc.c a separated module
- OMAP ELM:
- Convert the bindings to yaml
- Describe the bindings for AM64 ELM
- Add support for its compatible
- Renesas: Use runtime PM instead of the raw clock API and update the
bindings accordingly
- Rockchip: Check before clk_disable_unprepare() not needed
- TMIO: Check return value after calling platform_get_resource()
Raw NAND chip driver:
- Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00
SPI-NAND chip drivers:
- Gigadevice:
- Add support for:
- GD5FxGM7xExxG
- GD5F{2,4}GQ5xExxG
- GD5F1GQ5RExxG
- GD5FxGQ4xExxG
- Fix Quad IO for GD5F1GQ5UExxG
- XTX: Add support for XT26G0xA
SPI NOR core changes:
- Read back written SR value to make sure the write was done
correctly.
- Introduce a common function for Read ID that manufacturer drivers
can use to verify the Octal DTR switch worked correctly.
- Add helpers for read/write any register commands so manufacturer
drivers don't open code it every time.
- Clarify rdsr dummy cycles documentation.
- Add debugfs entry to expose internal flash parameters and state.
SPI NOR manufacturer drivers changes:
- Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A.
- Move spi_nor_write_ear() to Winbond module since only Winbond
flashes use it.
- Rework Micron and Cypress Octal DTR enable methods to improve
readability.
- Use the common Read ID function to verify switch to Octal DTR mode
for Micron and Cypress flashes.
- Skip polling status on volatile register writes for Micron and
Cypress flashes since the operation is instant"
* tag 'mtd/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (68 commits)
mtd: st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove()
dt-bindings: mtd: partitions: Extend fixed-partitions binding
dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix
mtd: phram: Allow cached mappings
mtd: call of_platform_populate() for MTD partitions
mtd: rawnand: renesas: Use runtime PM instead of the raw clock API
dt-bindings: mtd: renesas: Fix the NAND controller description
mtd: rawnand: mpc5121: Check before clk_disable_unprepare() not needed
mtd: rawnand: rockchip: Check before clk_disable_unprepare() not needed
mtd: nand: MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
mtd: rawnand: cs553x: simplify the return expression of cs553x_write_ctrl_byte()
mtd: rawnand: kioxia: Add support for TH58NVG3S0HBAI4
mtd: spi-nor: debugfs: fix format specifier
mtd: spi-nor: support eon en25qh256a variant
mtd: spi-nor: winbond: add support for W25Q512NW-IM
mtd: spi-nor: expose internal parameters via debugfs
mtd: spi-nor: export spi_nor_hwcaps_pp2cmd()
mtd: spi-nor: move spi_nor_write_ear() to winbond module
mtd: spi-nor: amend the rdsr dummy cycles documentation
mtd: cfi_cmdset_0002: Rename chip_ready variables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for the Microchip LAN966x SoC
- PMBus driver for Infineon Digital Multi-phase xdp152 family
controllers
Chip support added to existing drivers:
- asus-ec-sensors:
- Support for ROG STRIX X570-E GAMING WIFI II, PRIME X470-PRO, and
ProArt X570 Creator WIFI
- External temperature sensor support for ASUS WS X570-ACE
- nct6775:
- Support for I2C driver
- Support for ASUS PRO H410T / PRIME H410M-R /
ROG X570-E GAMING WIFI II
- lm75:
- Support for - Atmel AT30TS74
- pmbus/max16601:
- Support for MAX16602
- aquacomputer_d5next:
- Support for Aquacomputer Farbwerk
- Support for Aquacomputer Octo
- jc42:
- Support for S-34TS04A
Kernel API changes / clarifications:
- The chip parameter of with_info API is now mandatory
- New hwmon_device_register_for_thermal API call for use by the
thermal subsystem
Improvements:
- PMBus and JC42 drivers now register with thermal subsystem
- PMBus drivers now support get_voltage/set_voltage power operations
- The adt7475 driver now supports pin configuration
- The lm90 driver now supports setting extended range temperatures
configuration with a devicetree property
- The dell-smm driver now registers as cooling device
- The OCC driver delays hwmon registration until requested by
userspace
... and various other minor fixes and improvements"
* tag 'hwmon-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (71 commits)
hwmon: (aquacomputer_d5next) Fix an error handling path in aqc_probe()
hwmon: (sl28cpld) Fix typo in comment
hwmon: (pmbus) Check PEC support before reading other registers
hwmon: (dimmtemp) Fix bitmap handling
hwmon: (lm90) enable extended range according to DTS node
dt-bindings: hwmon: lm90: add ti,extended-range-enable property
dt-bindings: hwmon: lm90: add missing ti,tmp461
hwmon: (ibmaem) Directly use ida_alloc()/free()
hwmon: Directly use ida_alloc()/free()
hwmon: (asus-ec-sensors) fix Formula VIII definition
dt-bindings: trivial-devices: Add xdp152
hwmon: (sl28cpld-hwmon) Use HWMON_CHANNEL_INFO macro
hwmon: (pwm-fan) Use HWMON_CHANNEL_INFO macro
hwmon: (peci/dimmtemp) Use HWMON_CHANNEL_INFO macro
hwmon: (peci/cputemp) Use HWMON_CHANNEL_INFO macro
hwmon: (mr75203) Use HWMON_CHANNEL_INFO macro
hwmon: (ltc2992) Use HWMON_CHANNEL_INFO macro
hwmon: (as370-hwmon) Use HWMON_CHANNEL_INFO macro
hwmon: Make chip parameter for with_info API mandatory
thermal/drivers/thermal_hwmon: Use hwmon_device_register_for_thermal()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA updates from Mimi Zohar:
"New is IMA support for including fs-verity file digests and signatures
in the IMA measurement list as well as verifying the fs-verity file
digest based signatures, both based on policy.
In addition, are two bug fixes:
- avoid reading UEFI variables, which cause a page fault, on Apple
Macs with T2 chips.
- remove the original "ima" template Kconfig option to address a boot
command line ordering issue.
The rest is a mixture of code/documentation cleanup"
* tag 'integrity-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Fix sparse warnings in keyring_handler
evm: Clean up some variables
evm: Return INTEGRITY_PASS for enum integrity_status value '0'
efi: Do not import certificates from UEFI Secure Boot for T2 Macs
fsverity: update the documentation
ima: support fs-verity file digest based version 3 signatures
ima: permit fsverity's file digests in the IMA measurement list
ima: define a new template field named 'd-ngv2' and templates
fs-verity: define a function to return the integrity protected file digest
ima: use IMA default hash algorithm for integrity violations
ima: fix 'd-ng' comments and documentation
ima: remove the IMA_TEMPLATE Kconfig option
ima: remove redundant initialization of pointer 'file'.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
- Tightened validation of key hashes for SYSTEM_BLACKLIST_HASH_LIST. An
invalid hash format causes a compilation error. Previously, they got
included to the kernel binary but were silently ignored at run-time.
- Allow root user to append new hashes to the blacklist keyring.
- Trusted keys backed with Cryptographic Acceleration and Assurance
Module (CAAM), which part of some of the new NXP's SoC's. Now there
is total three hardware backends for trusted keys: TPM, ARM TEE and
CAAM.
- A scattered set of fixes and small improvements for the TPM driver.
* tag 'tpmdd-next-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
MAINTAINERS: add KEYS-TRUSTED-CAAM
doc: trusted-encrypted: describe new CAAM trust source
KEYS: trusted: Introduce support for NXP CAAM-based trusted keys
crypto: caam - add in-kernel interface for blob generator
crypto: caam - determine whether CAAM supports blob encap/decap
KEYS: trusted: allow use of kernel RNG for key material
KEYS: trusted: allow use of TEE as backend without TCG_TPM support
tpm: Add field upgrade mode support for Infineon TPM2 modules
tpm: Fix buffer access in tpm2_get_tpm_pt()
char: tpm: cr50_i2c: Suppress duplicated error message in .remove()
tpm: cr50: Add new device/vendor ID 0x504a6666
tpm: Remove read16/read32/write32 calls from tpm_tis_phy_ops
tpm: ibmvtpm: Correct the return value in tpm_ibmvtpm_probe()
tpm/tpm_ftpm_tee: Return true/false (not 1/0) from bool functions
certs: Explain the rationale to call panic()
certs: Allow root user to append signed hashes to the blacklist keyring
certs: Check that builtin blacklist hashes are valid
certs: Make blacklist_vet_description() more strict
certs: Factor out the blacklist hash creation
tools/certs: Add print-cert-tbs-hash.sh
|
|
Pull smack update from Casey Schaufler:
"A single change to remove a pointless assignment"
* tag 'Smack-for-5.19' of https://github.com/cschaufler/smack-next:
smack: Remove redundant assignments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Landlock updates from Mickaël Salaün:
- improve the path_rename LSM hook implementations for RENAME_EXCHANGE;
- fix a too-restrictive filesystem control for a rare corner case;
- set the nested sandbox limitation to 16 layers;
- add a new LANDLOCK_ACCESS_FS_REFER access right to properly handle
file reparenting (i.e. full rename and link support);
- add new tests and documentation;
- format code with clang-format to make it easier to maintain and
contribute.
* tag 'landlock-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (30 commits)
landlock: Explain how to support Landlock
landlock: Add design choices documentation for filesystem access rights
landlock: Document good practices about filesystem policies
landlock: Document LANDLOCK_ACCESS_FS_REFER and ABI versioning
samples/landlock: Add support for file reparenting
selftests/landlock: Add 11 new test suites dedicated to file reparenting
landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER
LSM: Remove double path_rename hook calls for RENAME_EXCHANGE
landlock: Move filesystem helpers and add a new one
landlock: Fix same-layer rule unions
landlock: Create find_rule() from unmask_layers()
landlock: Reduce the maximum number of layers to 16
landlock: Define access_mask_t to enforce a consistent access mask size
selftests/landlock: Test landlock_create_ruleset(2) argument check ordering
landlock: Change landlock_restrict_self(2) check ordering
landlock: Change landlock_add_rule(2) argument check ordering
selftests/landlock: Add tests for O_PATH
selftests/landlock: Fully test file rename with "remove" access
selftests/landlock: Extend access right tests to directories
selftests/landlock: Add tests for unknown access rights
...
|
|
The leds-trigger-pattern documentation describes how the brightness of
the LED should transition linearly from one brightness value to the
next, over the given delta_t.
But the pattern engine in the Qualcomm LPG hardware only supports
holding the brightness for each entry for the period.
This subset of patterns can be represented in the leds-trigger-pattern
by injecting zero-time transitions after each entry in the pattern,
resulting in a pattern that pattern that can be rendered by the LPG.
Rework LPG pattern interface to require these zero-time transitions, to
make it comply with this subset of patterns and reject the patterns it
can't render.
Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"We've got twelve patches queued for v5.19, with most being fairly
minor. The highlights are below:
- The checkreqprot and runtime disable knobs have been deprecated for
some time with no active users that we can find. In an effort to
move things along we are adding a pause when the knobs are used to
help make the deprecation more noticeable in case anyone is still
using these hacks in the shadows.
- We've added the anonymous inode class name to the AVC audit records
when anonymous inodes are involved. This should make writing policy
easier when anonymous inodes are involved.
- More constification work. This is fairly straightforward and the
source of most of the diffstat.
- The usual minor cleanups: remove unnecessary assignments, assorted
style/checkpatch fixes, kdoc fixes, macro while-loop
encapsulations, #include tweaks, etc"
* tag 'selinux-pr-20220523' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
security: declare member holding string literal const
selinux: log anon inode class name
selinux: declare data arrays const
selinux: fix indentation level of mls_ops block
selinux: include necessary headers in headers
selinux: avoid extra semicolon
selinux: update parameter documentation
selinux: resolve checkpatch errors
selinux: don't sleep when CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE is true
selinux: checkreqprot is deprecated, add some ssleep() discomfort
selinux: runtime disable is deprecated, add some ssleep() discomfort
selinux: Remove redundant assignments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Fix binfmt_flat GOT handling for riscv (Niklas Cassel)
- Remove unused/broken binfmt_flat shared library and coredump code
(Eric W. Biederman)
* tag 'execve-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_flat: Remove shared library support
binfmt_flat: Drop vestiges of coredump support
binfmt_flat: do not stop relocating GOT entries prematurely on riscv
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
- Rework USER_NOTIF notification ordering and kill logic (Sargun
Dhillon)
- Improved PTRACE_O_SUSPEND_SECCOMP selftest (Jann Horn)
- Gracefully handle failed unshare() in selftests (Yang Guang)
- Spelling fix (Colin Ian King)
* tag 'seccomp-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Fix spelling mistake "Coud" -> "Could"
selftests/seccomp: Add test for wait killable notifier
selftests/seccomp: Refactor get_proc_stat to split out file reading code
seccomp: Add wait_killable semantic to seccomp user notifier
selftests/seccomp: Ensure that notifications come in FIFO order
seccomp: Use FIFO semantics to order notifications
selftests/seccomp: Add SKIP for failed unshare()
selftests/seccomp: Test PTRACE_O_SUSPEND_SECCOMP without CAP_SYS_ADMIN
|
|
Make the test_dummy_encryption mount option require that the encrypt
feature flag be already enabled on the filesystem, rather than
automatically enabling it. Practically, this means that "-O encrypt"
will need to be included in MKFS_OPTIONS when running xfstests with the
test_dummy_encryption mount option. (ext4/053 also needs an update.)
Moreover, as long as the preconditions for test_dummy_encryption are
being tightened anyway, take the opportunity to start rejecting it when
!CONFIG_FS_ENCRYPTION rather than ignoring it.
The motivation for requiring the encrypt feature flag is that:
- Having the filesystem auto-enable feature flags is problematic, as it
bypasses the usual sanity checks. The specific issue which came up
recently is that in kernel versions where ext4 supports casefold but
not encrypt+casefold (v5.1 through v5.10), the kernel will happily add
the encrypt flag to a filesystem that has the casefold flag, making it
unmountable -- but only for subsequent mounts, not the initial one.
This confused the casefold support detection in xfstests, causing
generic/556 to fail rather than be skipped.
- The xfstests-bld test runners (kvm-xfstests et al.) already use the
required mkfs flag, so they will not be affected by this change. Only
users of test_dummy_encryption alone will be affected. But, this
option has always been for testing only, so it should be fine to
require that the few users of this option update their test scripts.
- f2fs already requires it (for its equivalent feature flag).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Link: https://lore.kernel.org/r/20220519204437.61645-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/extents_status.c:199!
[...]
RIP: 0010:ext4_es_end fs/ext4/extents_status.c:199 [inline]
RIP: 0010:__es_tree_search+0x1e0/0x260 fs/ext4/extents_status.c:217
[...]
Call Trace:
ext4_es_cache_extent+0x109/0x340 fs/ext4/extents_status.c:766
ext4_cache_extents+0x239/0x2e0 fs/ext4/extents.c:561
ext4_find_extent+0x6b7/0xa20 fs/ext4/extents.c:964
ext4_ext_map_blocks+0x16b/0x4b70 fs/ext4/extents.c:4384
ext4_map_blocks+0xe26/0x19f0 fs/ext4/inode.c:567
ext4_getblk+0x320/0x4c0 fs/ext4/inode.c:980
ext4_bread+0x2d/0x170 fs/ext4/inode.c:1031
ext4_quota_read+0x248/0x320 fs/ext4/super.c:6257
v2_read_header+0x78/0x110 fs/quota/quota_v2.c:63
v2_check_quota_file+0x76/0x230 fs/quota/quota_v2.c:82
vfs_load_quota_inode+0x5d1/0x1530 fs/quota/dquot.c:2368
dquot_enable+0x28a/0x330 fs/quota/dquot.c:2490
ext4_quota_enable fs/ext4/super.c:6137 [inline]
ext4_enable_quotas+0x5d7/0x960 fs/ext4/super.c:6163
ext4_fill_super+0xa7c9/0xdc00 fs/ext4/super.c:4754
mount_bdev+0x2e9/0x3b0 fs/super.c:1158
mount_fs+0x4b/0x1e4 fs/super.c:1261
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
ext4_fill_super
ext4_enable_quotas
ext4_quota_enable
ext4_iget
__ext4_iget
ext4_ext_check_inode
ext4_ext_check
__ext4_ext_check
ext4_valid_extent_entries
Check for overlapping extents does't take effect
dquot_enable
vfs_load_quota_inode
v2_check_quota_file
v2_read_header
ext4_quota_read
ext4_bread
ext4_getblk
ext4_map_blocks
ext4_ext_map_blocks
ext4_find_extent
ext4_cache_extents
ext4_es_cache_extent
ext4_es_cache_extent
__es_tree_search
ext4_es_end
BUG_ON(es->es_lblk + es->es_len < es->es_lblk)
The error ext4 extents is as follows:
0af3 0300 0400 0000 00000000 extent_header
00000000 0100 0000 12000000 extent1
00000000 0100 0000 18000000 extent2
02000000 0400 0000 14000000 extent3
In the ext4_valid_extent_entries function,
if prev is 0, no error is returned even if lblock<=prev.
This was intended to skip the check on the first extent, but
in the error image above, prev=0+1-1=0 when checking the second extent,
so even though lblock<=prev, the function does not return an error.
As a result, bug_ON occurs in __es_tree_search and the system panics.
To solve this problem, we only need to check that:
1. The lblock of the first extent is not less than 0.
2. The lblock of the next extent is not less than
the next block of the previous extent.
The same applies to extent_idx.
Cc: stable@kernel.org
Fixes: 5946d089379a ("ext4: check for overlapping extents in ext4_valid_extent_entries()")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518120816.1541863-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
A maliciously corrupted filesystem can contain cycles in the h-tree
stored inside a directory. That can easily lead to the kernel corrupting
tree nodes that were already verified under its hands while doing a node
split and consequently accessing unallocated memory. Fix the problem by
verifying traversed block numbers are unique.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518093332.13986-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Before splitting a directory block verify its directory entries are sane
so that the splitting code does not access memory it should not.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518093332.13986-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The EXT4_FC_REPLAY bit in sbi->s_mount_state is used to indicate that
we are in the middle of replay the fast commit journal. This was
actually a mistake, since the sbi->s_mount_info is initialized from
es->s_state. Arguably s_mount_state is misleadingly named, but the
name is historical --- s_mount_state and s_state dates back to ext2.
What should have been used is the ext4_{set,clear,test}_mount_flag()
inline functions, which sets EXT4_MF_* bits in sbi->s_mount_flags.
The problem with using EXT4_FC_REPLAY is that a maliciously corrupted
superblock could result in EXT4_FC_REPLAY getting set in
s_mount_state. This bypasses some sanity checks, and this can trigger
a BUG() in ext4_es_cache_extent(). As a easy-to-backport-fix, filter
out the EXT4_FC_REPLAY bit for now. We should eventually transition
away from EXT4_FC_REPLAY to something like EXT4_MF_REPLAY.
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20220420192312.1655305-1-phind.uet@gmail.com
Link: https://lore.kernel.org/r/20220517174028.942119-1-tytso@mit.edu
Reported-by: syzbot+c7358a3cd05ee786eb31@syzkaller.appspotmail.com
|
|
This adds caching of the directory entries for a cached directory while we keep
a lease on the directory.
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Before this patch, function bh_get used block_map to figure out the
block it needed to read in from the quota_change file. This patch
changes it to use iomap directly to make it more efficient.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Before this patch, functions gfs2_qa_get and _put used the i_rw_mutex to
prevent simultaneous access to its i_qadata. But i_rw_mutex is now used
for many other things, including iomap_begin and end, which causes a
conflict according to lockdep. We cannot just remove the lock since
simultaneous opens (gfs2_open -> gfs2_open_common -> gfs2_qa_get) can
then stomp on each others values for i_qadata.
This patch solves the conflict by using the i_lock spin_lock in the inode
to prevent simultaneous access.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
The bug that 27ca8273f ("gfs2: Make sure FITRIM minlen is rounded up to
fs block size") fixes was a little confusing as the user saw
"Input/output error" which masked the -EINVAL that sb_issue_discard()
returned.
sb_issue_discard() can fail for various reasons, so we should return its
return value from gfs2_rgrp_send_discards() to avoid all errors being
reported as IO errors.
This improves error reporting for FITRIM and makes no difference to the
-o discard code path because the return value from
gfs2_rgrp_send_discards() gets thrown away in that case (and the option
switches off). Presumably that's why it was ok to just return -EIO in
the past, before FITRIM was implemented.
Tested with xfstests.
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Clang's structure layout randomization feature gets upset when it sees
struct address_space (which is randomized) cast to struct gfs2_glock.
This is due to seeing the mapping pointer as being treated as an array
of gfs2_glock, rather than "something else, before struct address_space":
In file included from fs/gfs2/acl.c:23:
fs/gfs2/meta_io.h:44:12: error: casting from randomized structure pointer type 'struct address_space *' to 'struct gfs2_glock *'
return (((struct gfs2_glock *)mapping) - 1)->gl_name.ln_sbd;
^
Replace the instances of open-coded pointer math with container_of()
usage, and update the allocator to match.
Some cleanups and conversion of gfs2_glock_get() and
gfs2_glock_dealloc() by Andreas.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202205041550.naKxwCBj-lkp@intel.com
Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Bill Wendling <morbo@google.com>
Cc: cluster-devel@redhat.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Add some comments explaining the oddities of partial direct I/O reads
and writes.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
- usercopy hardening expanded to check other allocation types (Matthew
Wilcox, Yuanzheng Song)
- arm64 stackleak behavioral improvements (Mark Rutland)
- arm64 CFI code gen improvement (Sami Tolvanen)
- LoadPin LSM block dev API adjustment (Christoph Hellwig)
- Clang randstruct support (Bill Wendling, Kees Cook)
* tag 'kernel-hardening-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (34 commits)
loadpin: stop using bdevname
mm: usercopy: move the virt_addr_valid() below the is_vmalloc_addr()
gcc-plugins: randstruct: Remove cast exception handling
af_unix: Silence randstruct GCC plugin warning
niu: Silence randstruct warnings
big_keys: Use struct for internal payload
gcc-plugins: Change all version strings match kernel
randomize_kstack: Improve docs on requirements/rationale
lkdtm/stackleak: fix CONFIG_GCC_PLUGIN_STACKLEAK=n
arm64: entry: use stackleak_erase_on_task_stack()
stackleak: add on/off stack variants
lkdtm/stackleak: check stack boundaries
lkdtm/stackleak: prevent unexpected stack usage
lkdtm/stackleak: rework boundary management
lkdtm/stackleak: avoid spurious failure
stackleak: rework poison scanning
stackleak: rework stack high bound handling
stackleak: clarify variable names
stackleak: rework stack low bound handling
stackleak: remove redundant check
...
|
|
git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity updates from Eric Biggers:
"A couple small cleanups for fs/verity/"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: Use struct_size() helper in enable_verity()
fs-verity: remove unused parameter desc_size in fsverity_create_info()
|
|
Pull fscrypt updates from Eric Biggers:
"Some cleanups for fs/crypto/:
- Split up the misleadingly-named FS_CRYPTO_BLOCK_SIZE constant.
- Consistently report the encryption implementation that is being
used.
- Add helper functions for the test_dummy_encryption mount option
that work properly with the new mount API. ext4 and f2fs will use
these"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: add new helper functions for test_dummy_encryption
fscrypt: factor out fscrypt_policy_to_key_spec()
fscrypt: log when starting to use inline encryption
fscrypt: split up FS_CRYPTO_BLOCK_SIZE
|
|
After allowing channels to reconnect in parallel, it now
becomes important to take care that multiple processes do not
call negotiate/session setup in parallel on the same channel.
This change avoids that by marking a channel as "in_reconnect".
During session setup if the channel in question has this flag
set, we return immediately.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
ses->status today shares statusEnum with server->tcpStatus.
This has been confusing, and tcon->status has deviated to use
a new enum. Follow suit and use new enum for ses_status as well.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Recent changes to multichannel to allow channel reconnects to
work in parallel and independent of each other did so by
making use of tcpStatus for the connection, and status for the
session. However, this did not take into account the multiuser
scenario, where same connection is used by multiple connections.
However, tcpStatus should be tracked only till the end of
negotiate exchange, and not used for session setup. This change
fixes this.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"These updates continue to refine the work began in 5.17 and 5.18 of
modernizing the RNG's crypto and streamlining and documenting its
code.
New for 5.19, the updates aim to improve entropy collection methods
and make some initial decisions regarding the "premature next" problem
and our threat model. The cloc utility now reports that random.c is
931 lines of code and 466 lines of comments, not that basic metrics
like that mean all that much, but at the very least it tells you that
this is very much a manageable driver now.
Here's a summary of the various updates:
- The random_get_entropy() function now always returns something at
least minimally useful. This is the primary entropy source in most
collectors, which in the best case expands to something like RDTSC,
but prior to this change, in the worst case it would just return 0,
contributing nothing. For 5.19, additional architectures are wired
up, and architectures that are entirely missing a cycle counter now
have a generic fallback path, which uses the highest resolution
clock available from the timekeeping subsystem.
Some of those clocks can actually be quite good, despite the CPU
not having a cycle counter of its own, and going off-core for a
stamp is generally thought to increase jitter, something positive
from the perspective of entropy gathering. Done very early on in
the development cycle, this has been sitting in next getting some
testing for a while now and has relevant acks from the archs, so it
should be pretty well tested and fine, but is nonetheless the thing
I'll be keeping my eye on most closely.
- Of particular note with the random_get_entropy() improvements is
MIPS, which, on CPUs that lack the c0 count register, will now
combine the high-speed but short-cycle c0 random register with the
lower-speed but long-cycle generic fallback path.
- With random_get_entropy() now always returning something useful,
the interrupt handler now collects entropy in a consistent
construction.
- Rather than comparing two samples of random_get_entropy() for the
jitter dance, the algorithm now tests many samples, and uses the
amount of differing ones to determine whether or not jitter entropy
is usable and how laborious it must be. The problem with comparing
only two samples was that if the cycle counter was extremely slow,
but just so happened to be on the cusp of a change, the slowness
wouldn't be detected. Taking many samples fixes that to some
degree.
This, combined with the other improvements to random_get_entropy(),
should make future unification of /dev/random and /dev/urandom
maybe more possible. At the very least, were we to attempt it again
today (we're not), it wouldn't break any of Guenter's test rigs
that broke when we tried it with 5.18. So, not today, but perhaps
down the road, that's something we can revisit.
- We attempt to reseed the RNG immediately upon waking up from system
suspend or hibernation, making use of the various timestamps about
suspend time and such available, as well as the usual inputs such
as RDRAND when available.
- Batched randomness now falls back to ordinary randomness before the
RNG is initialized. This provides more consistent guarantees to the
types of random numbers being returned by the various accessors.
- The "pre-init injection" code is now gone for good. I suspect you
in particular will be happy to read that, as I recall you
expressing your distaste for it a few months ago. Instead, to avoid
a "premature first" issue, while still allowing for maximal amount
of entropy availability during system boot, the first 128 bits of
estimated entropy are used immediately as it arrives, with the next
128 bits being buffered. And, as before, after the RNG has been
fully initialized, it winds up reseeding anyway a few seconds later
in most cases. This resulted in a pretty big simplification of the
initialization code and let us remove various ad-hoc mechanisms
like the ugly crng_pre_init_inject().
- The RNG no longer pretends to handle the "premature next" security
model, something that various academics and other RNG designs have
tried to care about in the past. After an interesting mailing list
thread, these issues are thought to be a) mainly academic and not
practical at all, and b) actively harming the real security of the
RNG by delaying new entropy additions after a potential compromise,
making a potentially bad situation even worse. As well, in the
first place, our RNG never even properly handled the premature next
issue, so removing an incomplete solution to a fake problem was
particularly nice.
This allowed for numerous other simplifications in the code, which
is a lot cleaner as a consequence. If you didn't see it before,
https://lore.kernel.org/lkml/YmlMGx6+uigkGiZ0@zx2c4.com/ may be a
thread worth skimming through.
- While the interrupt handler received a separate code path years ago
that avoids locks by using per-cpu data structures and a faster
mixing algorithm, in order to reduce interrupt latency, input and
disk events that are triggered in hardirq handlers were still
hitting locks and more expensive algorithms. Those are now
redirected to use the faster per-cpu data structures.
- Rather than having the fake-crypto almost-siphash-based random32
implementation be used right and left, and in many places where
cryptographically secure randomness is desirable, the batched
entropy code is now fast enough to replace that.
- As usual, numerous code quality and documentation cleanups. For
example, the initialization state machine now uses enum symbolic
constants instead of just hard coding numbers everywhere.
- Since the RNG initializes once, and then is always initialized
thereafter, a pretty heavy amount of code used during that
initialization is never used again. It is now completely cordoned
off using static branches and it winds up in the .text.unlikely
section so that it doesn't reduce cache compactness after the RNG
is ready.
- A variety of functions meant for waiting on the RNG to be
initialized were only used by vsprintf, and in not a particularly
optimal way. Replacing that usage with a more ordinary setup made
it possible to remove those functions.
- A cleanup of how we warn userspace about the use of uninitialized
/dev/urandom and uninitialized get_random_bytes() usage.
Interestingly, with the change you merged for 5.18 that attempts to
use jitter (but does not block if it can't), the majority of users
should never see those warnings for /dev/urandom at all now, and
the one for in-kernel usage is mainly a debug thing.
- The file_operations struct for /dev/[u]random now implements
.read_iter and .write_iter instead of .read and .write, allowing it
to also implement .splice_read and .splice_write, which makes
splice(2) work again after it was broken here (and in many other
places in the tree) during the set_fs() removal. This was a bit of
a last minute arrival from Jens that hasn't had as much time to
bake, so I'll be keeping my eye on this as well, but it seems
fairly ordinary. Unfortunately, read_iter() is around 3% slower
than read() in my tests, which I'm not thrilled about. But Jens and
Al, spurred by this observation, seem to be making progress in
removing the bottlenecks on the iter paths in the VFS layer in
general, which should remove the performance gap for all drivers.
- Assorted other bug fixes, cleanups, and optimizations.
- A small SipHash cleanup"
* tag 'random-5.19-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (49 commits)
random: check for signals after page of pool writes
random: wire up fops->splice_{read,write}_iter()
random: convert to using fops->write_iter()
random: convert to using fops->read_iter()
random: unify batched entropy implementations
random: move randomize_page() into mm where it belongs
random: remove mostly unused async readiness notifier
random: remove get_random_bytes_arch() and add rng_has_arch_random()
random: move initialization functions out of hot pages
random: make consistent use of buf and len
random: use proper return types on get_random_{int,long}_wait()
random: remove extern from functions in header
random: use static branch for crng_ready()
random: credit architectural init the exact amount
random: handle latent entropy and command line from random_init()
random: use proper jiffies comparison macro
random: remove ratelimiting for in-kernel unseeded randomness
random: move initialization out of reseeding hot path
random: avoid initializing twice in credit race
random: use symbolic constants for crng_init states
...
|
|
Jonathan Lemon says:
====================
ptp: ocp: various updates
Collection of cleanups and updates to the timecard.
====================
Link: https://lore.kernel.org/r/20220519212153.450437-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Right now it's possible to flash any kind of binary via devlink and
break the card easily. This diff adds an optional header check when
installing the firmware.
Signed-off-by: Vadim Fedorenko <vadfed@fb.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The NTL timecard design has a PPS1 selector which selects the
the PPS source automatically, according to Section 1.9 of the
documentation.
If there is a SMA PPS input detected:
- send signal to MAC and PPS slave selector.
If there is a MAC PPS input detected:
- send GNSS1 to the MAC
- send MAC to the PPS slave
If there is a GNSS1 input detected:
- send GNSS1 to the MAC
- send GNSS1 to the PPS slave.MAC
Change the debugfs summary so it reflects the correct mapping,
for assistance in debugging. No functional change.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create an .init function for the op vector, and a corresponding
wrapper function, for different sma mapping setups.
Add a default_fcn to the sma information, and use it when displaying
information for pins which have fixed functions.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the SMA get and set functions into an operations vector for
different boards.
Create wrappers for the accessor functions.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ocp selectors are all constant, so label them as such.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Group the sma input/output tables together and select the correct
group from the bp information. This allows adding new groups with
different sma mappings.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Preparse the firmware image information into loader/tag/version,
and set the fw capabilities based on the tag/version.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Celestica is producing card with their own vendor id and device id.
Add these ids to driver to support this card.
Signed-off-by: Vadim Fedorenko <vadfed@fb.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These #ifdefs are not required, so remove them.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use 'resource_size_t' instead of 'unsigned long' when computing the
pci start address, for the benefit of 32-bit platforms.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 8c3b8dc5cc9bf6d273ebe18b16e2d6882bcfb36d.
Some rollback issue will be fixed in other patches in the future.
Link: https://lore.kernel.org/all/20220523055056.2078994-1-liuyacan@corp.netease.com/
Fixes: 8c3b8dc5cc9b ("net/smc: fix listen processing for SMC-Rv2")
Signed-off-by: liuyacan <liuyacan@corp.netease.com>
Link: https://lore.kernel.org/r/20220524090230.2140302-1-liuyacan@corp.netease.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
