summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-12-20vmxnet3: locking problems in xmitDan Carpenter
There were several paths that didn't release their locks. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-20typhoon: memory corruption in typhoon_get_drvinfo()Dan Carpenter
info->version only has space for 32 characters but my UTS_RELEASE is "2.6.37-rc6-next-20101217-05817-ge935fc8-dirty" so it doesn't fit. This is supposed to be the version of the driver, not the kernel version. This driver doesn't have a version so lets just leave it blank. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-20net: Add USB PID for new MOSCHIP USB ethernet controller MCS7832 variantAndreas Mohr
Due to active notification of the new MCS7832 version by the manufacturer (Mr. Milton; thanks!) -- quote: "functionality same as MCS7830", I'm now submitting this patch (on -rc6), intended for networking.git and -stable. - add MCS7832 USB PID to be able to support this new device variant, too - add related descriptions Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-20ipv4: Flush per-ns routing cache more sanely.David S. Miller
Flush the routing cache only of entries that match the network namespace in which the purge event occurred. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
2010-12-20ehea: Fixing some message levelBreno Leitao
Currently there are some info message that is set as error, and an error message that is set as debug. This patch just fixes it. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-20Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] gspca - sonixj: Better handling of the bridge registers 0x01 and 0x17 [media] gspca - sonixj: Add the bit definitions of the bridge reg 0x01 and 0x17 [media] gspca - sonixj: Set the flag for some devices [media] gspca - sonixj: Add a flag in the driver_info table [media] gspca - sonixj: Fix a bad probe exchange [media] gspca - sonixj: Move bridge init to sd start [media] bttv: remove unneeded locking comments [media] bttv: fix mutex use before init (BZ#24602) [media] Don't export format_by_forcc on two different drivers
2010-12-20workqueue: allow chained queueing during destructionTejun Heo
Currently, destroy_workqueue() makes the workqueue deny all new queueing by setting WQ_DYING and flushes the workqueue once before proceeding with destruction; however, there are cases where work items queue more related work items. Currently, such users need to explicitly flush the workqueue multiple times depending on the possible depth of such chained queueing. This patch updates the queueing path such that a work item can queue further work items on the same workqueue even when WQ_DYING is set. The flush on destruction is automatically retried until the workqueue is empty. This guarantees that the workqueue is empty on destruction while allowing chained queueing. The flush retry logic whines if it takes too many retries to drain the workqueue. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
2010-12-20batman-adv: Return hna count on local buffer fillSven Eckelmann
hna_local_fill_buffer must return the number of added hna entries and not the last checked hash bucket. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-20pktgen: Remove unnecessary prefix from pr_<level>Joe Perches
Remove "pktgen: " prefix string from one pr_info. pr_fmt adds it, so this is a duplicate. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-20[SCSI] bfa: rename log_level to bfa_log_levelJing Huang
Rename log_level to bfa_log_level to make the global variable more bfa specific and avoid clashes with other drivers which was causing a build failure. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-20net_sched: always clone skbsChangli Gao
Pawel reported a panic related to handling shared skbs in ixgbe incorrectly. So we need to revert my previous patch to work around this bug. Instead of reverting the patch completely, I just revert the essential lines, so we can add the previous optimization back more easily in future. commit 3511c9132f8b1e1b5634e41a3331c44b0c13be70 Author: Changli Gao <xiaosuo@gmail.com> Date: Sat Oct 16 13:04:08 2010 +0000 net_sched: remove the unused parameter of qdisc_create_dflt() Reported-by: Pawel Staszewski <pstaszewski@itcare.pl> Signed-off-by: Changli Gao <xiaosuo@gmail.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-20Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: mach-shmobile: INTC interrupt priority level demux fix ARM: mach-shmobile: fix compile warning in mm/init.c
2010-12-20Merge branch 'sh-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: clocksource: sh_cmt: Remove nested spinlock fix
2010-12-20Merge branch 'fbdev-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: OMAP: OMAPFB: disable old omapfb for OMAP4 builds OMAP: DSS: VRAM: Align start & size of vram to 2M
2010-12-20Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV210: update MAX8998 platform data to get rid of WARN() ARM S3C24XX: Fix compilation of PM code for S3C2416 ARM: S3C24XX: Fix CONFIG_S3C_DEV_NAND Kconfig entry
2010-12-20Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: cciss: fix cciss_revalidate panic block: max hardware sectors limit wrapper block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead blk-throttle: Correct the placement of smp_rmb() blk-throttle: Trim/adjust slice_end once a bio has been dispatched block: check for proper length of iov entries earlier in blk_rq_map_user_iov() drbd: fix for spin_lock_irqsave in endio callback drbd: don't recvmsg with zero length
2010-12-20Fix btrfs b0rkageAl Viro
Buggered-in: 76dda93c6ae2 ("Btrfs: add snapshot/subvolume destroy ioctl") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Chris Mason <chris.mason@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-20clarify a usage constraint for cnt32_to_63()Nicolas Pitre
The cnt32_to_63 algorithm relies on proper counter data evaluation ordering to work properly. This was missing from the provided documentation. Let's augment the documentation with the missing usage constraint and fix the only instance that got it wrong. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-20Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Remove debugging check
2010-12-20ARM: SMP: ensure frame pointer is reinitialized for soft-CPU hotplugRussell King
When we soft-CPU hotplug a CPU, we reset the stack pointer and jump back to start_secondary(). This allows us to restart as if the CPU was actually reset. However, we weren't resetting the frame pointer, which could cause problems with backtracing. Reset the frame pointer to zero (which means no parent frame) just like the early assembly code also does. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: mxs: Add build configuration for mxsShawn Guo
Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add initial mx28evk supportShawn Guo
Add initial mx28evk support with duart and fec0. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add initial mx23evk supportShawn Guo
Add initial mx23evk support with duart. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Dynamically allocate fec devicesShawn Guo
Dynamically allocate fec devices for MX28, which gets dual fec interface. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Dynamically allocate duart devicesShawn Guo
Dynamically allocate duart devices for MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add static memory mappingShawn Guo
Create static memory mapping for MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add clock supportShawn Guo
Add clock for MXS-based SoCs, MX23 and MX28. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add iomux supportShawn Guo
MXS-based SoCs implements iomux functions in block PINCTRL. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add gpio supportShawn Guo
MXS-based SoCs implement gpio support in block PINCTRL. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add timer supportShawn Guo
There are 2 versions of the timrot on Freescale MXS-based SoCs. The v1 on MX23 only gets 16 bits counter, while v2 on MX28 extends the counter to 32 bits. The implementation uses two timers, one for clock_event and another for clocksource. MX28 uses timrot 0 and 1, while MX23 uses 0 and 2. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20ARM: mxs: Add low-level debug UART supportShawn Guo
- DEBUG_LL support, which is incompatible with multi-soc MXS image because of different DUART base address on MX23 and MX28 - uncompress message support Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-12-20[media] mceusb: set a default rx timeoutJarod Wilson
Its possible for the call to read rx timeout from the hardware to fail, in which case we end up with a bogus rx timeout value. Set a default one when filling in the rc struct, and we'll just overwrite it later w/the value from hardware, but if that read fails, we've at least got a sane rx timeout value to work with (1000ms is the default value I've seen returned on most if not all mceusb hardware). Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] mceusb: fix inverted mask inversion logicJarod Wilson
As it turns out, somewhere along the way, we managed to invert the meaning of the tx_mask_inverted flag. Looking back over the old lirc driver, tx_mask_inverted was set to 0 if the device was in tx_mask_list. Now we have a tx_mask_inverted flag set to 1 for all the devices that were in the list, and set tx_mask_inverted to that flag value, which is actually the opposite of what we used to set, causing set_tx_mask to use the wrong mask setting option. Since there seem to be more devices with inverted masks than not (using the original device as the baseline for inverted vs. normal), lets just call the ones currently marked as inverted normal instead, and flip the if/else actions that key off of the inverted flag. Note: the problem only cropped up if a call to set_tx_mask was made, if no mask was set, the device would work just fine, which is why this managed to slip though w/o getting noticed until now. Tested successfully by myself and Dennis Gilmore. Reported-by: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] mceusb: add another Fintek device IDJarod Wilson
Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] lirc_dev: fixes in lirc_dev_fop_read()Dan Carpenter
This makes several changes but they're in one function and sort of related: "buf" was leaked on error. The leak if we try to read an invalid length is the main concern because it could be triggered over and over. If the copy_to_user() failed, then the original code returned the number of bytes remaining. read() is supposed to be the opposite way, where we return the number of bytes copied. I changed it to just return -EFAULT on errors. Also I changed the debug output from "-EFAULT" to just "<fail>" because it isn't -EFAULT necessarily. And since we go though that path if the length is invalid now, there was another debug print that I removed. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Jarod Wilson <jarod@redhat.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] lirc_dev: stray unlock in lirc_dev_fop_poll()Dan Carpenter
We shouldn't unlock here. I think this was a cut and paste error. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] rc: fix sysfs entry for mceusb and streamzapPaul Bender
When trying to create persistent device names for mceusb and streamzap devices, I noticed that their respective drivers are not creating the rc device as a child of the USB device. Rather it creates it as virtual device. As a result, udev cannot use the USB device information to create persistent device names for event and lirc devices associated with the rc device. Not having persistent device names makes it more difficult to make use of the devices in userspace as their names can change. Signed-off-by: Paul Bender <pebender@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] streamzap: merge timeout space with trailing spaceJarod Wilson
There are cases where we get an ending space, and our trailing timeout space then gets sent right after it, which breaks repeat, at least for lirc userspace decoding. Merge the two spaces by way of using ir_raw_event_store_filter, set a timeout value, and we're back to good. Successfully tested with streamzap and windows mce remotes. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] mceusb: fix keybouce issue after parser simplificationJarod Wilson
Something I failed to notice while testing the mceusb RLE buffer decoding simplification patches was that we were getting an extra event from the previously pressed key. As was pointed out to me on irc by Maxim, this is actually due to using ir_raw_event_store_with_filter without having set up a timeout value. The hardware has a timeout value we're now reading and storing, which properly enables the transition to idle in the raw event storage process, and makes IR decode behave correctly w/o keybounce. Also remove no-longer-used ir_raw_event struct from mceusb_dev struct and add as-yet-unused enable flags for carrier reports and learning mode, which I'll hopefully start wiring up sooner than later. While looking into that, found evidence that 0x9f 0x15 responses are only non-zero when the short-range learning sensor is used, so correct the debug spew message, and then suppress it when using the standard long-range sensor. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] IR: add tv power scancode to rc6 mce keymapJarod Wilson
And clean up some stray spaces. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] mceusb: buffer parsing fixups for 1st-gen deviceJarod Wilson
If we pass in an offset, we shouldn't skip 2 bytes. And the first-gen hardware generates a constant stream of interrupts, always with two header bytes, and if there's been no IR, with nothing else. Bail from ir processing without calling ir_handle_raw_event when we get such a buffer delivered to us. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] mceusb: fix up reporting of trailing spaceJarod Wilson
We were storing a bunch of spaces at the end of each signal, rather than a single long space. The in-kernel decoders were actually okay with this, but lirc isn't. As suggested by David Härdeman, switch to storing samples using ir_raw_event_store_with_filter, which auto-merges the consecutive space samples for us. This also allows us to bypass having to store rawir samples in our device struct, further simplifying the buffer parsing state machine. Both in-kernel decoders and lirc are happy again with this change. Also included in this patch is proper parsing of 0x9f 0x01 commands, the removal of some magic number usage and some printk spew fixups. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] nuvoton-cir: improve buffer parsing responsivenessJarod Wilson
Rather than waiting for trigger bits, the formula for which was slightly messy, and apparently, not actually 100% complete for some remotes, just call ir_raw_event_handle whenever we finish parsing a chunk of data from the rx fifo, similar to mceusb, as well as whenever we see an 'end of signal data' 0x80 packet. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] mceusb: add support for Conexant Hybrid TV RDU253SJarod Wilson
Another multi-function Conexant device. Interface 0 is IR, though on this model, TX isn't wired up at all, so I've mixed in support for models without TX (and verified that lircd says TX isn't supported when trying to send w/this device). Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] s5p-fimc: Fix output DMA handling in S5PV310 IP revisionsSylwester Nawrocki
FIMC IP in S5Pv310 series has extended DMA status registers and some bit fields are marked as reserved comparing to S5PC100/110. Use correct registers for getting DMA write pointer in each SoC variant supported by the driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] s5p-fimc: Use correct fourcc code for 32-bit RGB formatSylwester Nawrocki
Replace V4L2_PIX_FMT_RGB24 code with V4L2_PIX_FMT_RGB32 since the hardware uses 24-bits for actual pixel data but pixels are 4-byte aligned in memory. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] s5p-fimc: Convert m2m driver to unlocked_ioctlSylwester Nawrocki
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] s5p-fimc: Explicitly add required header fileSylwester Nawrocki
Reported by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] s5p-fimc: Fix vidioc_g_crop/cropcap on camera sensorSylwester Nawrocki
Create separate vidioc_g_crop/vidioc_s_crop handlers for capture video node and so image cropping parameters are properly queried at FIMC input (image sensor) and not at FIMC output. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] s5p-fimc: BKL lock removal - compilation fixSylwester Nawrocki
Adapt to recent videobuf_queue_dma_contig_init signature change. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>