summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-12-16USB: gadget: update ci13xxx to work with g_etherArtem Leonenko
There is one nasty scenario when CI13xxx driver fails: a) two or more rx requests are queued (g_ether does that) b) rx request completed, interrupt fires and ci13xxx dequeues rq c) request complete() callback gets called and in turn it calls ep_queue() c1) in ep_queue() request gets added to the TAIL of the rx queue list d) ep gets primed with rq from (b) e) interrupt fires f) request gets popped from queue head for hw dequeue G) requets from queue head wasn't enqueued g1) isr_tr_complete_low() doesn't enqueue more requests and it doesn't prime EP, rx traffic stalls Solution: a) enque queued requests ASAP, i.e. before calling complete() callback. b) don't HW enqueue and prime endpoint with recently added request and use the oldest request in the queue. Fixed issues: a) ep_queue() may return an error code despite request was successfully added to the queue (if _hardware_enqueue() fails) b) Added requests are always processed in LIFO order, even if they are added in complete() callback c) Finally more than two and more queued requests are processed consistently, even if they were added in complete() callback The fix was successfully tested on MIPS based SoC with 4KEc CPU core and CI13612 USB core. Board successfully boots with NFS root using g_ether on ci13xxx udc. Signed-off-by: Artem Leonenko <tikkeri@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16USB: gadgets: ci13xxx: fix probing of compiled-in gadget driversArtem Leonenko
Built-in gadget drivers have NULL-ifed unbind() function. Checking whether unbind() is NULL will never let any compiled into kernel driver attach. Signed-off-by: Artem Leonenko <tikkeri@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16net: use NUMA_NO_NODE instead of the magic number -1Changli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bonding: add the debugfs interface to see RLB hash tableTaku Izumi
This patch provices the debugfs interface to see RLB hash table like the following: # cat /sys/kernel/debug/bonding/bond0/rlb_hash_table SourceIP DestinationIP Destination MAC DEV 10.124.196.205 10.124.196.205 ff:ff:ff:ff:ff:ff eth4 10.124.196.205 10.124.196.81 00:19:99:XX:XX:XX eth3 10.124.196.205 10.124.196.1 00:21:d8:XX:XX:XX eth0 This is helpful to check if the receive load balancing works as expected. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bonding: migrate some macros from bond_alb.c to bond_alb.hTaku Izumi
This patch simply migrates some macros from bond_alb.c to bond_alb.h. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: NUMA-aware Tx queue allocationsDimitris Michailidis
Allocate Tx queue memory on the node indicated by the new netdev_queue_numa_node_read. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: extend VPD parsingDimitris Michailidis
Current code parses the VPD RO section for keywords but makes static assumptions about the location of the section. Remove them and parse the VPD to find it. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: add const to static arraysJoe Perches
Patch originally from Joe Perches, unmodified. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: remove a bitmapDimitris Michailidis
The driver keeps a bitmap of the netdevs it registered so it knows what to unregister later. Remove that and look at reg_state instead. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: remove the name field from the adapter structureDimitris Michailidis
Remove a field the driver uses to keep track of the name of the first netdev it manages to register. Do this by changing the registration loop to stop the first time it fails so the first registered device is trivial to tell. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: correct formatting of MSI-X interrupt namesDimitris Michailidis
The last byte of the buffer for MSI-X names could not be used due to a bogus -1. Also do not explicitly clear the last byte, snprintf will do the right thing. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: allocate more space for MSI-X interrupt namesDimitris Michailidis
Currently MSI-X names for netdevs with long names are truncated in /proc/interrupts due to insufficient space. Use IFNAMSIZ to size the needed space. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: print port information after registering each netdevDimitris Michailidis
Print information about each port when its netdev is registered instead of looping separately over the ports at the end. The bulk of this patch is due to indentation change. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: distinguish between 1-lane KR/KX and 4-lane KR/KX/KX4 portsDimitris Michailidis
And fix the supported flags ethtool reports for the two cases. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: set the number of queues before device registrationDimitris Michailidis
The number of queues is known early, move the calls to netif_set_real_num_[rt]x_queues before register_netdev. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: do not read the clock frequency from VPDDimitris Michailidis
No need to read the clock frequency from VPD, we already get it a bit later from FW, after any potential adjustments. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16cxgb4: enable PCIe relaxed orderingDimitris Michailidis
Enable relaxed ordering for descriptor reads and packet I/O. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: update version to 1.62.00-2Vladislav Zolotarov
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: remove old FW filesVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: replace FW to 6.2.5Vladislav Zolotarov
Includes FCoE releated fixes in FW flows Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add FW 6.2.5 filesVladislav Zolotarov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: Add DCB/PFC support - link layerVladislav Zolotarov
Add appropriate HW DCB/PFC configuration Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add DCB supportVladislav Zolotarov
Adding DCB initialization and handling on 57712 FW/HW Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add a select queue callbackVladislav Zolotarov
This callback required to allow FCoE traffic to be sent on separate priority queue from other L2 traffic, which is managed by PFC in HW. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: add FCoE ringVladislav Zolotarov
Includes new driver structures and FW/HW configuration for FCoE ring Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Shmulik Ravid-Rabinovitz <shmulikr@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bnx2x: Take the distribution range definition out of skb_tx_hash()Vladislav Zolotarov
Move the calcualation of the Tx hash for a given hash range into a separate function and define the skb_tx_hash(), which calculates a Tx hash for a [0; dev->real_num_tx_queues - 1] hash values range, using this function (__skb_tx_hash()). Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16drivers: serial: apbuart: Handle OF failures gracefullyThomas Gleixner
The apbuart driver depends on OF and relies on everything being available. So if it's probed on a platform which has OF support, but no device tree is available it crashes. Triggered by the upcoming x86 OF support in randconfig testing. Further it's inconsistent vs. the probing and exiting from the of_match loop. Make it robust and consistent: - check the availablility of OF nodes before dereferencing - return -ENODEV when the device tree lookup fails - return -ENODEV when no uart port configuration is found - return -ENODEV when invalid uart port configuration is found Remove the enum_done check while at it. Driver init functions are only called once. Remove the pointless vendor and device queries as well. Reported-by: Ingo Molnar <mingo.elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Kristoffer Glembo <kristoffer@gaisler.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16Serial: Avoid unbalanced IRQ wake disable during resumeGovindraj.R
To avoid unbalanced IRQ wake disable, ensure that wakeups are disabled only when wakeups have been successfully enabled. Tested on OMAP3630SDP/ZOOM3. Signed-off-by: Govindraj.R <govindraj.raja@ti.com> Reported-by: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16tty: fix typos/errors in tty_driver.h commentsTimur Tabi
Fix various typos and other errors in comments of tty_driver.h. The most significant is the wrong name of a function for the description of TTY_DRIVER_DYNAMIC_DEV. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16pch_uart : fix warnings for 64bit compileTomoya MORINAGA
Fix the following warnings drivers/serial/pch_uart.c: In function ‘dma_handle_rx’: drivers/serial/pch_uart.c:685:24: warning: cast from pointer to integer of different size drivers/serial/pch_uart.c: In function ‘dma_handle_tx’: drivers/serial/pch_uart.c:778:23: warning: cast from pointer to integer of different size drivers/serial/pch_uart.c: In function ‘pch_uart_init_port’: drivers/serial/pch_uart.c:1289:20: warning: cast to pointer from integer of different size drivers/serial/pch_uart.c: In function ‘pch_uart_exit_port’: drivers/serial/pch_uart.c:1328:2: warning: cast from pointer to integer of different size Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Reported-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16n_gsm: gsm_data_alloc buffer allocation could fail and it is not being checkedKen Mills
gsm_data_alloc buffer allocation could fail and it is not being checked. Add check for allocated buffer and return if the buffer allocation fails. Signed-off-by: Ken Mills <ken.k.mills@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16n_gsm: Fix message length handling when building headerKen Mills
Fix message length handling when building header When the message length is greater than 127, the length field in the header is built incorrectly. According to the spec, when the length is less than 128 the length field is a single byte formatted as: bbbbbbb1. When it is greater than 127 then the field is two bytes of the format: bbbbbbb0 bbbbbbbb. Signed-off-by: Ken Mills <ken.k.mills@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16bonding/vlan: Fix mangled NAs on slaves without VLAN tag insertionBen Hutchings
bond_na_send() attempts to insert a VLAN tag in between building and sending packets of the respective formats. If the slave does not implement hardware VLAN tag insertion then vlan_put_tag() will mangle the network-layer header because the Ethernet header is not present at this point (unlike in bond_arp_send()). Fix this by adding the tag out-of-line and relying on dev_hard_start_xmit() to insert it inline if necessary. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bonding: Change active slave quietly when bond is downBen Hutchings
bond_change_active_slave() may be called when a slave is added, even if the bond has not been brought up yet. It may then attempt to send packets, and further it may use mcast_work which is uninitialised before the bond is brought up. Add the necessary checks for netif_running(bond->dev). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bonding/vlan: Remove redundant VLAN tag insertion logicBen Hutchings
A bond may have a mixture of slave devices with and without hardware VLAN tag insertion capability. Therefore it always claims this capability and performs software VLAN tag insertion if the slave does not. Since commit 7b9c60903714bf0a19d746b228864bad3497284e, this has also been done by dev_hard_start_xmit(). The result is that VLAN- tagged skbs are now double-tagged when transmitted through slave devices without hardware VLAN tag insertion! Remove the now-redundant logic from bond_dev_queue_xmit(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16axnet_cs: move id (0x1bf, 0x2328) to axnet_csKen Kawasaki
axnet_cs: Accton EN2328 or compatible (id: 0x01bf, 0x2328) uses Asix chip. So it works better with axnet_cs instead of pcnet_cs. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16ipv6: delete expired route in ip6_pmtu_deliverAndrey Vagin
The first big packets sent to a "low-MTU" client correctly triggers the creation of a temporary route containing the reduced MTU. But after the temporary route has expired, new ICMP6 "packet too big" will be sent, rt6_pmtu_discovery will find the previous EXPIRED route check that its mtu isn't bigger then in icmp packet and do nothing before the temporary route will not deleted by gc. I make the simple experiment: while :; do time ( dd if=/dev/zero bs=10K count=1 | ssh hostname dd of=/dev/null ) || break; done The "time" reports real 0m0.197s if a temporary route isn't expired, but it reports real 0m52.837s (!!!!) immediately after a temporare route has expired. Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16bonding: Fix slave selection bug.Hillf Danton
The returned slave is incorrect, if the net device under check is not charged yet by the master. Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16rtlwifi: Switch locking from semaphores to mutexesLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16rtl8192ce: Update MAINTAINERSLarry Finger
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath5k: Fix surveyBruno Randolf
The old survey implementation was broken and returned nonsense data. Clear cycle counters and survey data on reset. Since the cycle counters easily overflow it's better to keep a local version of collected survey data (in ms resolution, instead of clockrate) and update this every time survey is retrieved. If survey is retrieved often enough to avoid cycle counter overflows this works fine, otherwise we could update survey more often, like ath9k does. Still only the survey for the current channel is kept. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16rtl8192ce: Fix build on powerpcLarry Finger
After merge of the rtl8192ce driver, a powerpc build fails with: drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c: In function 'rtl92c_init_sw_vars': drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c:76: error: implicit declaration of function 'vmalloc' drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c:76: warning: cast to pointer from integer of different size drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c: In function 'rtl92c_deinit_sw_vars': drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-sw.c:91: error: implicit declaration of function 'vfree' The problem is fixed by explicitly including the appropriate header. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath: fix NULL pointer dereference on reg_notifier()Luis R. Rodriguez
The reg_notifier() was recently updated as being capable of having the request passed as NULL, fix ath to follow this API change. Without this we end up oopsing: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [<ffffffffa02fb8cb>] ath_reg_notifier_apply+0x5b/0xa0 [ath] PGD b4c4c067 PUD b4c4d067 PMD 0 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/pci0000:00/0000:00:1b.0/uevent CPU 1 Modules linked in: <etc> Pid: 436, comm: modprobe Not tainted 2.6.37-rc5-wl+ #36 6460DWU/6460DWU RIP: 0010:[<ffffffffa02fb8cb>] [<ffffffffa02fb8cb>] ath_reg_notifier_apply+0x5b/0xa0 [ath] RSP: 0018:ffff8800b6f6baa8 EFLAGS: 00010246 RAX: ffff8800b527b254 RBX: ffff8800b532c180 RCX: 0000000000000018 RDX: ffff8800b530c108 RSI: 0000000000000000 RDI: ffff8800b532c180 RBP: ffff8800b6f6baa8 R08: ffff8800b532f268 R09: 0000000000000235 R10: 00000000000016ad R11: 0000000000000018 R12: 0000000000000000 R13: 0000000000000016 R14: ffff8800b532f268 R15: 0000000000000011 FS: 00007f0c53104700(0000) GS:ffff8800bed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000004 CR3: 00000000b6531000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 436, threadinfo ffff8800b6f6a000, task ffff8800b404dc40) Stack: ffff8800b6f6bac8 ffffffffa03ea651 ffff8800b532c180 ffff8800b527b254 ffff8800b6f6bb38 ffffffffa01835ca ffffffffa019ed00 00000000a019ed80 0000000000000002 ffff880000000002 ffffffffa0366140 0000000010aee572 Call Trace: [<ffffffffa03ea651>] ath9k_reg_notifier+0x41/0x50 [ath9k] [<ffffffffa01835ca>] wiphy_update_regulatory+0x4ba/0x5a0 [cfg80211] [<ffffffffa0366140>] ? ieee80211_register_hw+0xa0/0x5b0 [mac80211] [<ffffffffa0366140>] ? ieee80211_register_hw+0xa0/0x5b0 [mac80211] [<ffffffffa017f994>] wiphy_register+0x1d4/0x360 [cfg80211] [<ffffffff8114b918>] ? __kmalloc+0x108/0x1c0 [<ffffffffa0366223>] ieee80211_register_hw+0x183/0x5b0 [mac80211] [<ffffffffa03eb49b>] ath9k_init_device+0x66b/0x850 [ath9k] [<ffffffffa03f9dd6>] ath_pci_probe+0x2f6/0x3c0 [ath9k] [<ffffffff81037529>] ? default_spin_lock_flags+0x9/0x10 [<ffffffff812e19cf>] local_pci_probe+0x5f/0xd0 [<ffffffff812e2bf1>] pci_device_probe+0x101/0x120 [<ffffffff81390aca>] ? driver_sysfs_add+0x7a/0xb0 [<ffffffff81390c26>] driver_probe_device+0x96/0x1c0 [<ffffffff81390deb>] __driver_attach+0x9b/0xa0 [<ffffffff81390d50>] ? __driver_attach+0x0/0xa0 [<ffffffff81390008>] bus_for_each_dev+0x68/0x90 [<ffffffff81390a4e>] driver_attach+0x1e/0x20 [<ffffffff81390309>] bus_add_driver+0xe9/0x290 [<ffffffffa0407000>] ? ath9k_init+0x0/0x4d [ath9k] [<ffffffff81391130>] driver_register+0x80/0x150 [<ffffffffa0407000>] ? ath9k_init+0x0/0x4d [ath9k] [<ffffffffa0407000>] ? ath9k_init+0x0/0x4d [ath9k] [<ffffffff812e2e76>] __pci_register_driver+0x56/0xd0 [<ffffffffa03f9ec3>] ath_pci_init+0x23/0x30 [ath9k] [<ffffffffa040702b>] ath9k_init+0x2b/0x4d [ath9k] [<ffffffff81002053>] do_one_initcall+0x43/0x190 [<ffffffff8109fb5b>] sys_init_module+0xbb/0x200 [<ffffffff8100c042>] system_call_fastpath+0x16/0x1b Code: <who even reads this anyway? haha, ok you do> RIP [<ffffffffa02fb8cb>] ath_reg_notifier_apply+0x5b/0xa0 [ath] RSP <ffff8800b6f6baa8> CR2: 0000000000000004 ---[ end trace 6d03d3c7eda9f06b ]--- Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16cfg80211: fix null pointer dereference with a custom regulatory requestLuis R. Rodriguez
Once we moved the core regulatory request to the queue and let the scheduler process it last_request will have been left NULL until the schedular decides to process the first request. When this happens and we are loading a driver with a custom regulatory request like all Atheros drivers we end up with a NULL pointer dereference. We fix this by checking if the request was a custom one. BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [<ffffffffa016de87>] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211] PGD 71f91067 PUD 712b2067 PMD 0 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/firmware/2-1/loading CPU 0 Modules linked in: ath9k_htc(+) ath9k_common ath9k_hw ath <etc> Pid: 3094, comm: insmod Tainted: G W 2.6.37-rc5-wl #16 INVALID/28427ZQ RIP: 0010:[<ffffffffa016de87>] [<ffffffffa016de87>] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211] RSP: 0018:ffff88007045db78 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffffa047d9a0 RCX: ffff88007045dbd0 RDX: 0000000000004e20 RSI: 000000000024cde0 RDI: ffff8800700483e0 RBP: ffff88007045db98 R08: ffffffffa02f5b40 R09: 0000000000000001 R10: 000000000000000e R11: 0000000000000001 R12: 0000000000000000 R13: ffff88007004e3b0 R14: 0000000000000000 R15: ffff880070048340 FS: 00007f635a707700(0000) GS:ffff880077400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000004 CR3: 00000000708a9000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process insmod (pid: 3094, threadinfo ffff88007045c000, task ffff8800713e3ec0) Stack: ffffffffa047d9a0 0000000000000000 ffff88007004e3b0 0000000000000000 ffff88007045dc08 ffffffffa016e147 000000007045dc08 0000000000000002 ffff8800700483e0 ffffffffa02f5b40 ffff88007045dbd8 0000000000000000 Call Trace: [<ffffffffa016e147>] wiphy_apply_custom_regulatory+0x137/0x1d0 [cfg80211] [<ffffffffa047a690>] ? ath9k_reg_notifier+0x0/0x50 [ath9k_htc] [<ffffffffa02f47f7>] ath_regd_init+0x347/0x430 [ath] [<ffffffffa047b1f5>] ath9k_htc_probe_device+0x6c5/0x960 [ath9k_htc] [<ffffffffa0472a2c>] ath9k_htc_hw_init+0xc/0x30 [ath9k_htc] [<ffffffffa04747e6>] ath9k_hif_usb_probe+0x216/0x3b0 [ath9k_htc] [<ffffffffa03bb6bc>] usb_probe_interface+0x10c/0x210 [usbcore] [<ffffffff812aec26>] driver_probe_device+0x96/0x1c0 [<ffffffff812aedf3>] __driver_attach+0xa3/0xb0 [<ffffffff812aed50>] ? __driver_attach+0x0/0xb0 [<ffffffff812adaae>] bus_for_each_dev+0x5e/0x90 [<ffffffff812ae8c9>] driver_attach+0x19/0x20 [<ffffffff812ae438>] bus_add_driver+0x168/0x320 [<ffffffff812af071>] driver_register+0x71/0x140 [<ffffffff811fc4a8>] ? __raw_spin_lock_init+0x38/0x70 [<ffffffffa03ba39c>] usb_register_driver+0xdc/0x190 [usbcore] [<ffffffffa03a2000>] ? ath9k_htc_init+0x0/0x4f [ath9k_htc] [<ffffffffa047499e>] ath9k_hif_usb_init+0x1e/0x20 [ath9k_htc] [<ffffffffa03a202b>] ath9k_htc_init+0x2b/0x4f [ath9k_htc] [<ffffffff8100212f>] do_one_initcall+0x3f/0x180 [<ffffffff8109ef5b>] sys_init_module+0xbb/0x200 [<ffffffff8100bf52>] system_call_fastpath+0x16/0x1b Code: <etc, who cares> RIP [<ffffffffa016de87>] freq_reg_info_regd.clone.2+0x27/0x130 [cfg80211] RSP <ffff88007045db78> CR2: 0000000000000004 ---[ end trace 79e4193601c8b713 ]--- Reported-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath9k_hw: Configure appropriate Tx power when PAPRD failsVasanthakumar Thiagarajan
Target Tx power available in eeprom is for PAPRD. If PAPRD fails, paprd scale factor needs to be detected from this target tx power. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath9k_hw: Disable PAPRD for rates with low Tx powerVasanthakumar Thiagarajan
When the drop in Tx power for a particular mcs rate exceeds the paprd scale factor, paprd may not work properly. Disable paprd for any such rates. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath9k_hw: Add a helper to get paprd scale factorVasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath9k_hw: Tx IQ cal changes for AR9003Vasanthakumar Thiagarajan
Add multiple Tx IQ cal support to improve EVM accross different power levels. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath9k_hw: Move get_streams() to hw.hVasanthakumar Thiagarajan
This helper can be used in multiple places. Also make it inline returning u8. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath9k_hw: Remove unnecessary Rx IQ cal register configuration in ↵Vasanthakumar Thiagarajan
ar9003_hw_tx_iq_cal() Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-24 00:51:43 +0000