| Age | Commit message (Collapse) | Author |
|---|
|
When vmxnet3_rq_create() fails to allocate rq->data_ring.base due to page
allocation failure, subsequent call to vmxnet3_rq_rx_complete() can result in
NULL pointer dereference.
To fix this bug, check not only that rxDataRingUsed is true but also that
adapter->rxdataring_enabled is true before calling memcpy() in
vmxnet3_rq_rx_complete().
[1728352.477993] ethtool: page allocation failure: order:9, mode:0x6000c0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
...
[1728352.478009] Call Trace:
[1728352.478028] dump_stack+0x41/0x60
[1728352.478035] warn_alloc.cold.120+0x7b/0x11b
[1728352.478038] ? _cond_resched+0x15/0x30
[1728352.478042] ? __alloc_pages_direct_compact+0x15f/0x170
[1728352.478043] __alloc_pages_slowpath+0xcd3/0xd10
[1728352.478047] __alloc_pages_nodemask+0x2e2/0x320
[1728352.478049] __dma_direct_alloc_pages.constprop.25+0x8a/0x120
[1728352.478053] dma_direct_alloc+0x5a/0x2a0
[1728352.478056] vmxnet3_rq_create.part.57+0x17c/0x1f0 [vmxnet3]
...
[1728352.478188] vmxnet3 0000:0b:00.0 ens192: rx data ring will be disabled
...
[1728352.515347] BUG: unable to handle kernel NULL pointer dereference at 0000000000000034
...
[1728352.515440] RIP: 0010:memcpy_orig+0x54/0x130
...
[1728352.515655] Call Trace:
[1728352.515665] <IRQ>
[1728352.515672] vmxnet3_rq_rx_complete+0x419/0xef0 [vmxnet3]
[1728352.515690] vmxnet3_poll_rx_only+0x31/0xa0 [vmxnet3]
...
Signed-off-by: Seiji Nishikawa <snishika@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tariq Toukan says:
====================
net/mlx5e: Extend XDP multi-buffer capabilities
This series extends the XDP multi-buffer support in the mlx5e driver.
Patchset breakdown:
- Infrastructural changes and preparations.
- Add XDP multi-buffer support for XDP redirect-in.
- Use TX MPWQE (multi-packet WQE) HW feature for non-linear
single-segmented XDP frames.
- Add XDP multi-buffer support for striding RQ.
In Striding RQ, we overcome the lack of headroom and tailroom between
the RQ strides by allocating a side page per packet and using it for the
xdp_buff descriptor. We structure the xdp_buff so that it contains
nothing in the linear part, and the whole packet resides in the
fragments.
Performance highlight:
Packet rate test, 64 bytes, 32 channels, MTU 9000 bytes.
CPU: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz.
NIC: ConnectX-6 Dx, at 100 Gbps.
+----------+-------------+-------------+---------+
| Test | Legacy RQ | Striding RQ | Speedup |
+----------+-------------+-------------+---------+
| XDP_DROP | 101,615,544 | 117,191,020 | +15% |
+----------+-------------+-------------+---------+
| XDP_TX | 95,608,169 | 117,043,422 | +22% |
+----------+-------------+-------------+---------+
Series generated against net commit:
e61caf04b9f8 Merge branch 'page_pool-allow-caching-from-safely-localized-napi'
I'm submitting this directly as Saeed is traveling.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here we add support for multi-buffer XDP handling in Striding RQ, which
is our default out-of-the-box RQ type. Before this series, loading such
an XDP program would fail, until you switch to the legacy RQ (by
unsetting the rx_striding_rq priv-flag).
To overcome the lack of headroom and tailroom between the strides, we
allocate a side page to be used for the descriptor (xdp_buff / skb) and
the linear part. When an XDP program is attached, we structure the
xdp_buff so that it contains no data in the linear part, and the whole
packet resides in the fragments.
In case of XDP_PASS, where an SKB still needs to be created, we copy up
to 256 bytes to its linear part, to match the current behavior, and
satisfy functions that assume finding the packet headers in the SKB
linear part (like eth_type_trans).
Performance testing:
Packet rate test, 64 bytes, 32 channels, MTU 9000 bytes.
CPU: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz.
NIC: ConnectX-6 Dx, at 100 Gbps.
+----------+-------------+-------------+---------+
| Test | Legacy RQ | Striding RQ | Speedup |
+----------+-------------+-------------+---------+
| XDP_DROP | 101,615,544 | 117,191,020 | +15% |
+----------+-------------+-------------+---------+
| XDP_TX | 95,608,169 | 117,043,422 | +22% |
+----------+-------------+-------------+---------+
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation for supporting XDP multi-buffer in striding RQ, use
xdp_buff struct to describe the packet. Make its skb_shared_info collide
the one of the allocated SKB, then add the fragments using the xdp_buff
API.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the function more generic. Let it get an additional frame_sz
parameter instead of deriving it from the RQ struct.
No functional change here, just a preparation for a downstream patch.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce mlx5e_add_skb_shared_info_frag(), a function dedicated for
adding a fragment into a struct skb_shared_info object.
Use it in the Legacy RQ flow. Similar usage will be added in a
downstream patch by the corresponding Striding RQ flow.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Under a few restrictions, TX MPWQE feature can serve multiple TX packets
in a single TX descriptor. It requires each of the packets to have a
single scatter entry / segment.
Today we allow only linear frames to use this feature, although there's
no real problem with non-linear ones where the whole packet reside in
the first fragment.
Expand the XDP TX MPWQE feature support to include such frames. This is
in preparation for the downstream patch, in which we will generate such
non-linear frames.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the assumption of non-zero linear length in the XDP xmit
function, used to serve both internal XDP_TX operations as well as
redirected-in requests.
Do not apply the MLX5E_XDP_MIN_INLINE check unless necessary.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
calculations
Function mlx5e_rx_get_linear_stride_sz() returns PAGE_SIZE immediately
in case an XDP program is attached. The more accurate formula is
ALIGN(sz, PAGE_SIZE), to prevent two packets from residing on the same
page.
The assumption behind the current code is that sz <= PAGE_SIZE holds for
all cases with XDP program set.
This is true because it is being called from:
- 3 times from Striding RQ flows, in which XDP is not supported for such
large packets.
- 1 time from Legacy RQ flow, under the condition
mlx5e_rx_is_linear_skb().
No functional change here, just removing the implied assumption in
preparation for supporting XDP multi-buffer in Striding RQ.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change mlx5e_xdp_allowed() so it gets the params structure with the
xdp_prog applied, rather than creating a local copy based on the current
params in priv.
This reduces the amount of memory on the stack, and acts on the exact
params instance that's about to be applied.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Non-linear mem scheme of Striding RQ does not yet support XDP at this
point. Take the check where it belongs, inside the params validation
function mlx5e_params_validate_xdp().
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Handle multi-buffer XDP redirect-in requests coming through
mlx5e_xdp_xmit.
Extend struct mlx5e_xmit_data_frags with an additional dma_arr field, to
point to the fragments dma mapping, as they cannot be retrieved via the
page_pool_get_dma_addr() function.
Push a dma_addr xdpi instance per each fragment, and use them in the
completion flow to dma_unmap the frags.
Finally, remove the restriction in mlx5e_open_xdpsq, and set the flag in
xdp_features.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Here we fix the current wi->num_pkts abuse, as it was used to indicate
multiple xdpi entries in the xdpi_fifo.
Instead, reduce mlx5e_xdp_info to the size of a single field, making it
a union of unions. Per packet, use as many instances as needed to
provide the information needed at the time of completion.
The sequence of xdpi instances pushed is well defined, derived by the
xmit_mode.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is not likely nor unlikely that the xdp buff has fragments, it
depends on the program loaded and size of the packet received.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce struct mlx5e_xmit_data_frags to be used for non-linear xmit
buffers. Let it include sinfo pointer.
Take one bit from the len field to indicate if the descriptor has
fragments and can be casted-up into the extended version.
Zero-init to make sure has_frags, and potentially future fields, are
zero when not explicitly assigned.
Another field will be added in a downstream patch to indicate and point
to dma addresses of the different frags, for redirect-in requests.
This simplifies the mlx5e_xmit_xdp_frame/mlx5e_xmit_xdp_frame_mpwqe
functions params.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move TX datapath struct from the generic en.h to the datapath txrx.h
header, where it belongs.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move struct mlx5e_xdp_info and enum mlx5e_xdp_xmit_mode from the generic
en.h to the XDP header, where they belong.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a net device is put administratively up, its 'IFF_UP' flag is set
(if not set already) and a 'NETDEV_UP' notification is emitted, which
causes the 8021q driver to add VLAN ID 0 on the device. The reverse
happens when a net device is put administratively down.
When changing the type of a bond to Ethernet, its 'IFF_UP' flag is
incorrectly cleared, resulting in the kernel skipping the above process
and VLAN ID 0 being leaked [1].
Fix by restoring the flag when changing the type to Ethernet, in a
similar fashion to the restoration of the 'IFF_SLAVE' flag.
The issue can be reproduced using the script in [2], with example out
before and after the fix in [3].
[1]
unreferenced object 0xffff888103479900 (size 256):
comm "ip", pid 329, jiffies 4294775225 (age 28.561s)
hex dump (first 32 bytes):
00 a0 0c 15 81 88 ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0
[<ffffffff8406426c>] vlan_vid_add+0x30c/0x790
[<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0
[<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0
[<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150
[<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0
[<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180
[<ffffffff8379af36>] do_setlink+0xb96/0x4060
[<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0
[<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0
[<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00
[<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440
[<ffffffff839a738f>] netlink_unicast+0x53f/0x810
[<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90
[<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70
[<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0
unreferenced object 0xffff88810f6a83e0 (size 32):
comm "ip", pid 329, jiffies 4294775225 (age 28.561s)
hex dump (first 32 bytes):
a0 99 47 03 81 88 ff ff a0 99 47 03 81 88 ff ff ..G.......G.....
81 00 00 00 01 00 00 00 cc cc cc cc cc cc cc cc ................
backtrace:
[<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0
[<ffffffff84064369>] vlan_vid_add+0x409/0x790
[<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0
[<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0
[<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150
[<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0
[<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180
[<ffffffff8379af36>] do_setlink+0xb96/0x4060
[<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0
[<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0
[<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00
[<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440
[<ffffffff839a738f>] netlink_unicast+0x53f/0x810
[<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90
[<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70
[<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0
[2]
ip link add name t-nlmon type nlmon
ip link add name t-dummy type dummy
ip link add name t-bond type bond mode active-backup
ip link set dev t-bond up
ip link set dev t-nlmon master t-bond
ip link set dev t-nlmon nomaster
ip link show dev t-bond
ip link set dev t-dummy master t-bond
ip link show dev t-bond
ip link del dev t-bond
ip link del dev t-dummy
ip link del dev t-nlmon
[3]
Before:
12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
link/netlink
12: t-bond: <BROADCAST,MULTICAST,MASTER,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether 46:57:39:a4:46:a2 brd ff:ff:ff:ff:ff:ff
After:
12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
link/netlink
12: t-bond: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether 66:48:7b:74:b6:8a brd ff:ff:ff:ff:ff:ff
Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type")
Fixes: 75c78500ddad ("bonding: remap muticast addresses without using dev_close() and dev_open()")
Fixes: 9ec7eb60dcbc ("bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/netdev/78a8a03b-6070-3e6b-5042-f848dab16fb8@alu.unizg.hr/
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove no more supported platforms (stih415/stih416 and stid127)
Signed-off-by: Alain Volmat <avolmat@me.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230416195523.61075-1-avolmat@me.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The types for the register argument changed recently, but there are
still incompatible prototypes that got left behind, and gcc-13 warns
about these:
In file included from drivers/net/ethernet/mscc/ocelot.c:13:
drivers/net/ethernet/mscc/ocelot.h:97:5: error: conflicting types for 'ocelot_port_readl' due to enum/integer mismatch; have 'u32(struct ocelot_port *, u32)' {aka 'unsigned int(struct ocelot_port *, unsigned int)'} [-Werror=enum-int-mismatch]
97 | u32 ocelot_port_readl(struct ocelot_port *port, u32 reg);
| ^~~~~~~~~~~~~~~~~
Just remove the two prototypes, and rely on the copy in the global
header.
Fixes: 9ecd05794b8d ("net: mscc: ocelot: strengthen type of "u32 reg" in I/O accessors")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230417205531.1880657-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
stmmac_dev_probe doesn't propagate feature flags to VLANs. So features
like offloading don't correspond with the general features and it's not
possible to manipulate features via ethtool -K to affect VLANs.
Propagate feature flags to vlan features. Drop TSO feature because
it does not work on VLANs yet.
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Link: https://lore.kernel.org/r/20230417192845.590034-1-vinschen@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Although __SIZEOF_POINTER__ is equal to _SIZEOF_LONG__ on LoongArch,
it is better to use __SIZEOF_LONG__ to define __BITS_PER_LONG to keep
consistent between arch/loongarch/include/uapi/asm/bitsperlong.h and
tools/arch/loongarch/include/uapi/asm/bitsperlong.h.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
According to LoongArch documentation [1], CSR.PGDL and CSR.PGDH are
concerned with the VA's MSB which is VALEN-1 instead of always being 47.
Fix comments to avoid misleading others.
[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#page-global-directory-base-address-for-lower-half-address-space
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
After commit c78c43fe7d42 ("LoongArch: Use acpi_arch_dma_setup() and
remove ARCH_HAS_PHYS_TO_DMA"), plat_swiotlb_setup() has been deleted,
so clean up the related code.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
We can see the following messages with CONFIG_PROVE_LOCKING=y on
LoongArch:
BUG: MAX_STACK_TRACE_ENTRIES too low!
turning off the locking correctness validator.
This is because stack_trace_save() returns a big value after call
arch_stack_walk(), here is the call trace:
save_trace()
stack_trace_save()
arch_stack_walk()
stack_trace_consume_entry()
arch_stack_walk() should return immediately if unwind_next_frame()
failed, no need to do the useless loops to increase the value of c->len
in stack_trace_consume_entry(), then we can fix the above problem.
Cc: stable@vger.kernel.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/8a44ad71-68d2-4926-892f-72bfc7a67e2a@roeck-us.net/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Ensure that user_watch_state can be set correctly by the user.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This is done in order to easily calculate the number of breakpoints in
hw_break_get()/hw_break_set().
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently, bonding only obtain the timestamp (ts) information of
the active slave, which is available only for modes 1, 5, and 6.
For other modes, bonding only has software rx timestamping support.
However, some users who use modes such as LACP also want tx timestamp
support. To address this issue, let's check the ts information of each
slave. If all slaves support tx timestamping, we can enable tx
timestamping support for the bond.
Add a note that the get_ts_info may be called with RCU, or rtnl or
reference on the device in ethtool.h>
Suggested-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20230418034841.2566262-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Unbreak br_netfilter physdev match support, from Florian Westphal.
2) Use GFP_KERNEL_ACCOUNT for stateful/policy objects, from Chen Aotian.
3) Use IS_ENABLED() in nf_reset_trace(), from Florian Westphal.
4) Fix validation of catch-all set element.
5) Tighten requirements for catch-all set elements.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
netfilter: nf_tables: validate catch-all set elements
netfilter: nf_tables: fix ifdef to also consider nf_tables=m
netfilter: nf_tables: Modify nla_memdup's flag to GFP_KERNEL_ACCOUNT
netfilter: br_netfilter: fix recent physdev match breakage
====================
Link: https://lore.kernel.org/r/20230418145048.67270-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Syzbot still reports uninit-value in nilfs_add_checksums_on_logs() for
KMSAN enabled kernels after applying commit 7397031622e0 ("nilfs2:
initialize "struct nilfs_binfo_dat"->bi_pad field").
This is because the unused bytes at the end of each block in segment
summaries are not initialized. So this fixes the issue by padding the
unused bytes with null bytes.
Link: https://lkml.kernel.org/r/20230417173513.12598-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+048585f3f4227bb2b49b@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=048585f3f4227bb2b49b
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A bug was reported by Yuanxi Liu where allocating 1G pages at runtime is
taking an excessive amount of time for large amounts of memory. Further
testing allocating huge pages that the cost is linear i.e. if allocating
1G pages in batches of 10 then the time to allocate nr_hugepages from
10->20->30->etc increases linearly even though 10 pages are allocated at
each step. Profiles indicated that much of the time is spent checking the
validity within already existing huge pages and then attempting a
migration that fails after isolating the range, draining pages and a whole
lot of other useless work.
Commit eb14d4eefdc4 ("mm,page_alloc: drop unnecessary checks from
pfn_range_valid_contig") removed two checks, one which ignored huge pages
for contiguous allocations as huge pages can sometimes migrate. While
there may be value on migrating a 2M page to satisfy a 1G allocation, it's
potentially expensive if the 1G allocation fails and it's pointless to try
moving a 1G page for a new 1G allocation or scan the tail pages for valid
PFNs.
Reintroduce the PageHuge check and assume any contiguous region with
hugetlbfs pages is unsuitable for a new 1G allocation.
The hpagealloc test allocates huge pages in batches and reports the
average latency per page over time. This test happens just after boot
when fragmentation is not an issue. Units are in milliseconds.
hpagealloc
6.3.0-rc6 6.3.0-rc6 6.3.0-rc6
vanilla hugeallocrevert-v1r1 hugeallocsimple-v1r2
Min Latency 26.42 ( 0.00%) 5.07 ( 80.82%) 18.94 ( 28.30%)
1st-qrtle Latency 356.61 ( 0.00%) 5.34 ( 98.50%) 19.85 ( 94.43%)
2nd-qrtle Latency 697.26 ( 0.00%) 5.47 ( 99.22%) 20.44 ( 97.07%)
3rd-qrtle Latency 972.94 ( 0.00%) 5.50 ( 99.43%) 20.81 ( 97.86%)
Max-1 Latency 26.42 ( 0.00%) 5.07 ( 80.82%) 18.94 ( 28.30%)
Max-5 Latency 82.14 ( 0.00%) 5.11 ( 93.78%) 19.31 ( 76.49%)
Max-10 Latency 150.54 ( 0.00%) 5.20 ( 96.55%) 19.43 ( 87.09%)
Max-90 Latency 1164.45 ( 0.00%) 5.53 ( 99.52%) 20.97 ( 98.20%)
Max-95 Latency 1223.06 ( 0.00%) 5.55 ( 99.55%) 21.06 ( 98.28%)
Max-99 Latency 1278.67 ( 0.00%) 5.57 ( 99.56%) 22.56 ( 98.24%)
Max Latency 1310.90 ( 0.00%) 8.06 ( 99.39%) 26.62 ( 97.97%)
Amean Latency 678.36 ( 0.00%) 5.44 * 99.20%* 20.44 * 96.99%*
6.3.0-rc6 6.3.0-rc6 6.3.0-rc6
vanilla revert-v1 hugeallocfix-v2
Duration User 0.28 0.27 0.30
Duration System 808.66 17.77 35.99
Duration Elapsed 830.87 18.08 36.33
The vanilla kernel is poor, taking up to 1.3 second to allocate a huge
page and almost 10 minutes in total to run the test. Reverting the
problematic commit reduces it to 8ms at worst and the patch takes 26ms.
This patch fixes the main issue with skipping huge pages but leaves the
page_count() out because a page with an elevated count potentially can
migrate.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=217022
Link: https://lkml.kernel.org/r/20230414141429.pwgieuwluxwez3rj@techsingularity.net
Fixes: eb14d4eefdc4 ("mm,page_alloc: drop unnecessary checks from pfn_range_valid_contig")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Yuanxi Liu <y.liu@naruida.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The maple tree limits the gap returned to a window that specifically fits
what was asked. This may not be optimal in the case of switching search
directions or a gap that does not satisfy the requested space for other
reasons. Fix the search by retrying the operation and limiting the search
window in the rare occasion that a conflict occurs.
Link: https://lkml.kernel.org/r/20230414185919.4175572-1-Liam.Howlett@oracle.com
Fixes: 3499a13168da ("mm/mmap: use maple tree for unmapped_area{_topdown}")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The internal function of mas_awalk() was incorrectly skipping the last
entry in a node, which could potentially be NULL. This is only a problem
for the left-most node in the tree - otherwise that NULL would not exist.
Fix mas_awalk() by using the metadata to obtain the end of the node for
the loop and the logical pivot as apposed to the raw pivot value.
Link: https://lkml.kernel.org/r/20230414145728.4067069-2-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Stop using maple state min/max for the range by passing through pointers
for those values. This will allow the maple state to be reused without
resetting.
Also add some logic to fail out early on searching with invalid
arguments.
Link: https://lkml.kernel.org/r/20230414145728.4067069-1-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Similarly to kmsan_vmap_pages_range_noflush(), kmsan_ioremap_page_range()
must also properly handle allocation/mapping failures. In the case of
such, it must clean up the already created metadata mappings and return an
error code, so that the error can be propagated to ioremap_page_range().
Without doing so, KMSAN may silently fail to bring the metadata for the
page range into a consistent state, which will result in user-visible
crashes when trying to access them.
Link: https://lkml.kernel.org/r/20230413131223.4135168-2-glider@google.com
Fixes: b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/
Reviewed-by: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As reported by Dipanjan Das, when KMSAN is used together with kernel fault
injection (or, generally, even without the latter), calls to kcalloc() or
__vmap_pages_range_noflush() may fail, leaving the metadata mappings for
the virtual mapping in an inconsistent state. When these metadata
mappings are accessed later, the kernel crashes.
To address the problem, we return a non-zero error code from
kmsan_vmap_pages_range_noflush() in the case of any allocation/mapping
failure inside it, and make vmap_pages_range_noflush() return an error if
KMSAN fails to allocate the metadata.
This patch also removes KMSAN_WARN_ON() from vmap_pages_range_noflush(),
as these allocation failures are not fatal anymore.
Link: https://lkml.kernel.org/r/20230413131223.4135168-1-glider@google.com
Fixes: b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/
Reviewed-by: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 799fb82aa132 ("tools/vm: rename tools/vm to tools/mm") missed
renaming 'vm' in 'tools/Makefile' to 'mm'. As a result, 'make clean'
under 'tools/' directory fails as below:
$ make -C tools clean
DESCEND vm
make[1]: Entering directory '/linux/tools/vm'
make[1]: *** No rule to make target 'clean'. Stop.
make[1]: Leaving directory '/linux/tools/vm'
make: *** [Makefile:173: vm_clean] Error 2
make: Leaving directory '/linux/tools'
Do the missed rename.
Link: https://lkml.kernel.org/r/20230415203110.13858-1-sj@kernel.org
Fixes: 799fb82aa132 ("tools/vm: rename tools/vm to tools/mm")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Ricardo Pardini <ricardo@pardini.net>
Link: https://lore.kernel.org/linux-mm/20230415202454.13558-1-sj@kernel.org/
Tested-by: Ricardo Pardini <ricardo@pardini.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit f1a7941243c1 ("mm: convert mm's rss stats into percpu_counter")
introduces a memory leak by missing a call to destroy_context() when a
percpu_counter fails to allocate.
Before introducing the per-cpu counter allocations, init_new_context() was
the last call that could fail in mm_init(), and thus there was no need to
ever invoke destroy_context() in the error paths. Adding the following
percpu counter allocations adds error paths after init_new_context(),
which means its associated destroy_context() needs to be called when
percpu counters fail to allocate.
Link: https://lkml.kernel.org/r/20230330133822.66271-1-mathieu.desnoyers@efficios.com
Fixes: f1a7941243c1 ("mm: convert mm's rss stats into percpu_counter")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
syzbot is reporting circular locking dependency which involves
zonelist_update_seq seqlock [1], for this lock is checked by memory
allocation requests which do not need to be retried.
One deadlock scenario is kmalloc(GFP_ATOMIC) from an interrupt handler.
CPU0
----
__build_all_zonelists() {
write_seqlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount odd
// e.g. timer interrupt handler runs at this moment
some_timer_func() {
kmalloc(GFP_ATOMIC) {
__alloc_pages_slowpath() {
read_seqbegin(&zonelist_update_seq) {
// spins forever because zonelist_update_seq.seqcount is odd
}
}
}
}
// e.g. timer interrupt handler finishes
write_sequnlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount even
}
This deadlock scenario can be easily eliminated by not calling
read_seqbegin(&zonelist_update_seq) from !__GFP_DIRECT_RECLAIM allocation
requests, for retry is applicable to only __GFP_DIRECT_RECLAIM allocation
requests. But Michal Hocko does not know whether we should go with this
approach.
Another deadlock scenario which syzbot is reporting is a race between
kmalloc(GFP_ATOMIC) from tty_insert_flip_string_and_push_buffer() with
port->lock held and printk() from __build_all_zonelists() with
zonelist_update_seq held.
CPU0 CPU1
---- ----
pty_write() {
tty_insert_flip_string_and_push_buffer() {
__build_all_zonelists() {
write_seqlock(&zonelist_update_seq);
build_zonelists() {
printk() {
vprintk() {
vprintk_default() {
vprintk_emit() {
console_unlock() {
console_flush_all() {
console_emit_next_record() {
con->write() = serial8250_console_write() {
spin_lock_irqsave(&port->lock, flags);
tty_insert_flip_string() {
tty_insert_flip_string_fixed_flag() {
__tty_buffer_request_room() {
tty_buffer_alloc() {
kmalloc(GFP_ATOMIC | __GFP_NOWARN) {
__alloc_pages_slowpath() {
zonelist_iter_begin() {
read_seqbegin(&zonelist_update_seq); // spins forever because zonelist_update_seq.seqcount is odd
spin_lock_irqsave(&port->lock, flags); // spins forever because port->lock is held
}
}
}
}
}
}
}
}
spin_unlock_irqrestore(&port->lock, flags);
// message is printed to console
spin_unlock_irqrestore(&port->lock, flags);
}
}
}
}
}
}
}
}
}
write_sequnlock(&zonelist_update_seq);
}
}
}
This deadlock scenario can be eliminated by
preventing interrupt context from calling kmalloc(GFP_ATOMIC)
and
preventing printk() from calling console_flush_all()
while zonelist_update_seq.seqcount is odd.
Since Petr Mladek thinks that __build_all_zonelists() can become a
candidate for deferring printk() [2], let's address this problem by
disabling local interrupts in order to avoid kmalloc(GFP_ATOMIC)
and
disabling synchronous printk() in order to avoid console_flush_all()
.
As a side effect of minimizing duration of zonelist_update_seq.seqcount
being odd by disabling synchronous printk(), latency at
read_seqbegin(&zonelist_update_seq) for both !__GFP_DIRECT_RECLAIM and
__GFP_DIRECT_RECLAIM allocation requests will be reduced. Although, from
lockdep perspective, not calling read_seqbegin(&zonelist_update_seq) (i.e.
do not record unnecessary locking dependency) from interrupt context is
still preferable, even if we don't allow calling kmalloc(GFP_ATOMIC)
inside
write_seqlock(&zonelist_update_seq)/write_sequnlock(&zonelist_update_seq)
section...
Link: https://lkml.kernel.org/r/8796b95c-3da3-5885-fddd-6ef55f30e4d3@I-love.SAKURA.ne.jp
Fixes: 3d36424b3b58 ("mm/page_alloc: fix race condition between build_all_zonelists and page allocation")
Link: https://lkml.kernel.org/r/ZCrs+1cDqPWTDFNM@alley [2]
Reported-by: syzbot <syzbot+223c7461c58c58a4cb10@syzkaller.appspotmail.com>
Link: https://syzkaller.appspot.com/bug?extid=223c7461c58c58a4cb10 [1]
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Petr Mladek <pmladek@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Patrick Daly <quic_pdaly@quicinc.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Linux Security Modules (LSMs) that implement the "capable" hook will
usually emit an access denial message to the audit log whenever they
"block" the current task from using the given capability based on their
security policy.
The occurrence of a denial is used as an indication that the given task
has attempted an operation that requires the given access permission, so
the callers of functions that perform LSM permission checks must take care
to avoid calling them too early (before it is decided if the permission is
actually needed to perform the requested operation).
The __sys_setres[ug]id() functions violate this convention by first
calling ns_capable_setid() and only then checking if the operation
requires the capability or not. It means that any caller that has the
capability granted by DAC (task's capability set) but not by MAC (LSMs)
will generate a "denied" audit record, even if is doing an operation for
which the capability is not required.
Fix this by reordering the checks such that ns_capable_setid() is checked
last and -EPERM is returned immediately if it returns false.
While there, also do two small optimizations:
* move the capability check before prepare_creds() and
* bail out early in case of a no-op.
Link: https://lkml.kernel.org/r/20230217162154.837549-1-omosnace@redhat.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
flag
For veth pairs, NETDEV_XDP_ACT_NDO_XMIT is supported by the current
device if the peer one is running a XDP program or if it has GRO enabled.
Fix the xdp_features flags reporting considering peer device and not
current one for NETDEV_XDP_ACT_NDO_XMIT.
Fixes: fccca038f300 ("veth: take into account device reconfiguration for xdp_features flag")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/4f1ca6f6f6b42ae125bfdb5c7782217c83968b2e.1681767806.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC host:
- sdhci_am654: Fix support for UHS-I SDR12 and SDR25 speed modes
MEMSTICK:
- Fix memory leak if card device never gets registered"
* tag 'mmc-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
memstick: fix memory leak if card device is never registered
mmc: sdhci_am654: Set HIGH_SPEED_ENA for SDR12 and SDR25
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are a number of updates for devicetree files for Qualcomm,
Rockchips, and NXP i.MX platforms, addressing mistakes in the DT
contents:
- Wrong GPIO polarity on some boards
- Lower SD card interface speed for better stability
- Incorrect power supply, clock, pmic, cache properties
- Disable broken hbr3 on sc7280-herobrine
- Devicetree warning fixes
The only other changes are:
- A regression fix for the Amlogic performance monitoring unit
driver, along with two related DT changes.
- imx_v6_v7_defconfig enables PCI support again.
- Trivial fixes for tee, optee and psci firmware drivers, addressing
compiler warning and error output"
* tag 'arm-fixes-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
firmware/psci: demote suspend-mode warning to info level
arm64: dts: qcom: sc7280: remove hbr3 support on herobrine boards
ARM: imx_v6_v7_defconfig: Fix unintentional disablement of PCI
arm64: dts: rockchip: correct panel supplies on some rk3326 boards
arm64: dts: rockchip: use just "port" in panel on RockPro64
arm64: dts: rockchip: use just "port" in panel on Pinebook Pro
ARM: dts: imx6ull-colibri: Remove unnecessary #address-cells/#size-cells
ARM: dts: imx7d-remarkable2: Remove unnecessary #address-cells/#size-cells
arm64: dts: imx8mp-verdin: correct off-on-delay
arm64: dts: imx8mm-verdin: correct off-on-delay
arm64: dts: imx8mm-evk: correct pmic clock source
arm64: dts: qcom: sc8280xp-pmics: fix pon compatible and registers
arm64: dts: rockchip: Remove non-existing pwm-delay-us property
arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices
tee: Pass a pointer to virt_to_page()
perf/amlogic: adjust register offsets
arm64: dts: meson-g12-common: resolve conflict between canvas & pmu
arm64: dts: meson-g12-common: specify full DMC range
arm64: dts: imx8mp: fix address length for LCDIF2
riscv: dts: canaan: drop invalid spi-max-frequency
...
|
|
These got*, plt* and .text.ftrace_trampoline sections specified for
LoongArch have non-zero addressses. Non-zero section addresses in a
relocatable ELF would confuse GDB when it tries to compute the section
offsets and it ends up printing wrong symbol addresses. Therefore, set
them to zero, which mirrors the change in commit 5d8591bc0fbaeb6ded
("arm64 module: set plt* section addresses to 0x0").
Cc: stable@vger.kernel.org
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
vm_map_base, empty_zero_page and invalid_pmd_table could be accessed
widely by some out-of-tree non-GPL but important file systems or drivers
(e.g. OpenZFS). Let's use EXPORT_SYMBOL() instead of EXPORT_SYMBOL_GPL()
to export them, so as to avoid build errors.
1, Details about vm_map_base:
This is a LoongArch-specific symbol and may be referenced through macros
PCI_IOBASE, VMALLOC_START and VMALLOC_END.
2, Details about empty_zero_page:
As it stands today, only 3 architectures export empty_zero_page as a GPL
symbol: IA64, LoongArch and MIPS. LoongArch gets the GPL export by
inheriting from MIPS, and the MIPS export was first introduced in commit
497d2adcbf50b ("[MIPS] Export empty_zero_page for sake of the ext4
module."). The IA64 export was similar: commit a7d57ecf4216e ("[IA64]
Export three symbols for module use") did so for kvm.
In both IA64 and MIPS, the export of empty_zero_page was done for
satisfying some in-kernel component built as module (kvm and ext4
respectively), and given its reasonably low-level nature, GPL is a
reasonable choice. But looking at the bigger picture it is evident most
other architectures do not regard it as GPL, so in effect the symbol
probably should not be treated as such, in favor of consistency.
3, Details about invalid_pmd_table:
Keep consistency with invalid_pte_table and make it be possible by some
modules.
Cc: stable@vger.kernel.org
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some firmwares don't enable PG when wakeup from suspend, so do it in
kernel. This can improve code compatibility for boot kernel.
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Addresses should all be of unsigned type to avoid unnecessary conversions.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
We can see the following build error on LoongArch if CONFIG_SUSPEND is
not set:
ld: drivers/acpi/sleep.o: in function 'acpi_pm_prepare':
sleep.c:(.text+0x2b8): undefined reference to 'loongarch_wakeup_start'
Here is the call trace:
acpi_pm_prepare()
__acpi_pm_prepare()
acpi_sleep_prepare()
acpi_get_wakeup_address()
loongarch_wakeup_start()
Root cause: loongarch_wakeup_start() is defined in arch/loongarch/power/
suspend_asm.S which is only built under CONFIG_SUSPEND. In order to fix
the build error, just let acpi_get_wakeup_address() return 0 if CONFIG_
SUSPEND is not set.
Fixes: 366bb35a8e48 ("LoongArch: Add suspend (ACPI S3) support")
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/all/11215033-fa3c-ecb1-2fc0-e9aeba47be9b@infradead.org/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Not all LoongArch processors support CRC32 instructions. This feature
is indicated by CPUCFG1.CRC32 (Bit25) but it is wrongly defined in the
previous versions of the ISA manual (and so does in loongarch.h). The
CRC32 feature is set unconditionally now, so fix it.
BTW, expose the CRC32 feature in /proc/cpuinfo.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch maintains cache coherency in hardware, but when paired with
LS7A chipsets the WUC attribute (Weak-ordered UnCached, which is similar
to WriteCombine) is out of the scope of cache coherency machanism for
PCIe devices (this is a PCIe protocol violation, which may be fixed in
newer chipsets).
This means WUC can only used for write-only memory regions now, so this
option is disabled by default, making WUC silently fallback to SUC for
ioremap(). You can enable this option if the kernel is ensured to run on
hardware without this bug.
Kernel parameter writecombine=on/off can be used to override the Kconfig
option.
Cc: stable@vger.kernel.org
Suggested-by: WANG Xuerui <kernel@xen0n.name>
Reviewed-by: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
