summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-18arm: dts: mt7623: use - instead of _ in DT node nameSean Wang
It should be good that no use "_" is in DT node name. Consequently, those nodes in certain files which have an inappropriate name containing "_" are all being replaced with "-". Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-18arm: dts: mt7623: remove useless property pinctrl-names at node switch@0Sean Wang
The property pinctrl-names is totally superfluous. It would be good to remove the property to keep the node neatness. There is actually unnecessary to set up any pins for data path TRGMII between main SoC and MT7530. Furthermore, it's more reasonable for the pin setup of control path MDIO bus is being placed inside the node of ethernet controller. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-18arm: dts: mt7623: add related clock properties to cpu[1-3] nodesSean Wang
Complement the missing clock properties cpu[1-3] should depend on. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: linux-pm@vger.kernel.org Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-18arm: dts: mt7623: enable three available UARTs on bananapi-r2Sean Wang
On bpi-r2 board, totally there're four UARTs which we usually called uart[0-3] helpful to extend slow-I/O devices. Among those ones, uart2 has dedicated pin slot which is used to console log. uart[0-1] appear at the 40-pins connector and uart3 has no pinout, but just has test points (TP47 for TX and TP48 for RX, respectively) nearby uart2, but we don't enable uart3 in the patch. The missing pinctrl is also being supplemented for those newly added devices. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-18arm: dts: mt7623: fix the regulators mmc should use on bananapi-r2Sean Wang
Both mmc devices on bananapi-r2 board should all use the fixed regulators as their power source instead of PMIC MT6323 exports. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-18dt-bindings: clock: mediatek: add missing required #reset-cellsSean Wang
All ethsys, pciesys and ssusbsys internally include reset controller, so explicitly add back these missing cell definitions to related bindings and examples. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Rob Herring <robh@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-clk@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-16ARM: dts: silk: Add GPIO keys to DTMagnus Damm
Extend the Silk board support to include SW3, SW4, SW6 and SW12. They are all connected via GPIO lines and handled by the gpio-keys driver. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-16ARM: dts: silk: Add r1ex24002 EEPROM to DTMagnus Damm
Extend the Silk board support to include U14 which is an I2C based EEPROM hooked up to the I2C1 bus. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-16ARM: dts: marzen: Add SDHI0 VCCQ RegulatorMagnus Damm
Add support for the on-board voltage regulator hooked up to GPIO3_20 on r8a7779 Marzen. The board schematics describes the regulator as U4 TPS2110A. Input wise, U4 has D0 fixed to ground, D1 tied to GPIO3_20 while IN1 is fixed to 3.3V and IN2 is fixed to 1.8V. OUT goes to the pull-ups for the data pins of SDHI0. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-16ARM: dts: stout: Initial r8a7790 Stout board supportMarek Vasut
Stout base board support making use of 1 GiB of memory, the Renesas H2 r8a7790 SoC with the SCIFA0 serial port and CA15 with ARM architected timer. Furthermore, this device tree contains entries for: - 4x LEDs - SDHI SD/MMC controller - Display unit with HDMI output - SH fast ethernet controller - QSPI controller with S25FL512S attached to it - I2C controller with DA9210 and DA 9063 PMICs Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-16ARM: dts: lager: Move cec_clock to root nodeGeert Uytterhoeven
cec-clock is a fixed clock generator that is not controlled by i2c-12 and thus should not be a child of the i2c-12 bus node. Rather, it should be a child of the root node of the DT. Fixes: c5aa87977626e778 ("ARM: dts: lager: Add CEC clock for HDMI transmitter") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-16ARM: dts: kzm9d: Fix "debounce-interval" property misspellingGeert Uytterhoeven
"debounce_interval" was never supported. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-16ARM: dts: imx6ul-isiot: Pass the required '#sound-dai-cells'Fabio Estevam
DTC now warns about missing #sound-dai-cells: /sound/simple-audio-card,codec: Missing property '#sound-dai-cells' in node /soc/aips-bus@2100000/i2c@21a0000/codec@a or bad phandle (referred from sound-dai[0]) Pass the required '#sound-dai-cells' property to fix it. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-16ARM: dts: imx6-phytec: Use the standard 'stdout-path' propertyFabio Estevam
Use the standard 'stdout-path' property to fix the following DTC warnings: arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dtb: Warning (chosen_node_stdout_path): /chosen:linux,stdout-path: Use 'stdout-path' instead Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-15ARM: dts: stih4xx: Add missing #sound-dai-cellsRob Herring
dtc now gives the following warnings: arch/arm/boot/dts/stih410-b2120.dtb: Warning (sound_dai_property): /soc/sound/simple-audio-card,dai-link@0/codec: Missing property '#sound-dai-cells' in node /soc/sti-display-subsystem/sti-hdmi@8d04000 or bad phandle (referred from sound-dai[0]) arch/arm/boot/dts/stih407-b2120.dtb: Warning (sound_dai_property): /soc/sound/simple-audio-card,dai-link@0/codec: Missing property '#sound-dai-cells' in node /soc/sti-display-subsystem/sti-hdmi@8d04000 or bad phandle (referred from sound-dai[0]) arch/arm/boot/dts/stih410-b2260.dtb: Warning (sound_dai_property): /soc/sound/simple-audio-card,dai-link@0/codec: Missing property '#sound-dai-cells' in node /soc/sti-display-subsystem/sti-hdmi@8d04000 or bad phandle (referred from sound-dai[0]) Add the missing #sound-dai-cells property. Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-15Merge tag 'imx-dt64-4.17' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Pull "Freescale arm64 device tree updates for 4.17" from Shawn Guo: - Move cpu_thermal device out of bus node to fix DTC simple_bus_reg warning seen with W=1 switch. - Fix IFC child nodes' unit-address to eliminate DTC simple_bus_reg warnings. - Add a dummy size memory 'reg' property for LS1046A device tree to avoid unit_address_vs_reg DTC warning, and the real size will be filled by bootloader. - Update ls208xa-qds board device tree to fix unit_address_vs_reg warnings with DSPI device. - Add idle-states for LS1012A and LS1043A, and correct arm,psci-suspend-param setting for already added idle-states. - DPAA QBMan portal and watchdog device addition. * tag 'imx-dt64-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: ifc: Fix the unit address format in the examples arm64: dts: ls1046a: add a dummy memory 'reg' property arm64: dts: fsl: fix ifc simple-bus unit address format warnings arm64: dts: fsl: update the cpu idle node arm64: dts: ls1043a: add cpu idle support arm64: dts: ls1012a: add cpu idle support arm64: dts: ls208xa-qds: Fix the 'reg' property arm64: dts: ls208xa-qds: Pass unit name to dspi child nodes arm64: dts: ls208xa: Move cpu_thermal out of bus node arm64: dts: ls1088a: Move cpu_thermal out of bus node arm64: dts: ls1046a: Move cpu_thermal out of bus node arm64: dts: ls1043a: Move cpu_thermal out of bus node arm64: dts: ls1012a: Move cpu_thermal out of bus node arm64: dts: Add DPAA QBMan portal 9 arm64: dts: ls1088a: add DT node of watchdog
2018-03-15Merge tag 'imx-dt-4.17' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Pull "i.MX device tree updates for 4.17" from Shawn Guo: - New board support: phyBOARD-Mira i.MX6 boards; Advantech DMS-BA16 i.MX6Q board; Toradex Colibri iMX6ULL boards. - ZII RDU board updates: add RAVE SP device; disable on-chip watchdog as the external watchdog is being used instead; improve USDHC node regarding to voltage and SDIO capability. - i.MX6UL/ULL updates: cpufreq clock cleanup; add IOMUXC_SNVS pins and missing daisy chain configurations; add more devices like WDOG3, UART8, PMU, architected timer etc. - Hummingboard updates: correct USBOTG-ID pin; remove mention of nonexistent node. - Fix compatibles of atmel eeprom devices. - A couple of improvements on i.MX25 pinfunc header regarding to eSDHC pins. - A bunch of patches from Fabio and Marco to fix DTC warnings seen with W=1 switch. - Remove GPU subsystem nodes, as they are not needed by the etnaviv driver anymore and have been removed from the binding. - Add FIFO depth definition for i.MX25 SSI devices. - Add missing '#sound-dai-cells' for sgtl5000 codec which is complained by DTC. - Miscellaneous and random updates. * tag 'imx-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (66 commits) ARM: dts: i.MX25: define SSI FIFO depth ARM: dts: vf610m4: Remove the zero length reg property ARM: dts: vf610m4: Remove skeleton.dtsi inclusion ARM: dts: vf500: Remove the zero length reg property ARM: dts: vf: Add memory node unit name ARM: dts: vf500: Remove skeleton.dtsi inclusion ARM: dts: imx7s: add temperature monitor support ARM: dts: imx: Add missing #sound-dai-cells for sgtl5000 codec ARM: dts: imx51-zii-rdu1: Add node for RAVE SP device ARM: dts: imx6: RDU2: Add RAVE SP device ARM: dts: imx5: Pass the memory unit-address ARM: dts: imx7s: add spba-bus abstraction ARM: dts: imx6dl-icore-rqs: Fix invalid PHY address assignment for ethernet ARM: dts: imx6ul: add wdog3 node ARM: dts: imx7: add CPU PMU support ARM: dts: imx6dl-colibri-eval-v3: Add chosen node ARM: dts: imx6: Pass memory unit-adress ARM: dts: imx6dl: remove 'lcdif' node ARM: dts: hummingboard: Remove mention of nonexistent node ARM: dts: imx6qdl-hummingboard: fix USBOTG-ID pin ...
2018-03-15Merge tag 'imx-dt-newclk-4.17' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Pull "i.MX device tree update with new clock for 4.17" from Shawn Guo: - Add CAAM and Keypad device node for i.MX7S/D SoC device tree. - Add clock support for i.MX7 SNVS RTC device. * tag 'imx-dt-newclk-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx7s: add Keypad Port module ARM: dts: imx7s: add CAAM device node ARM: dts: imx7s: add snvs rtc clock clk: imx: imx7d: add the Keypad Port module clock clk: imx7d: add CAAM clock clk: imx: imx7d: add the snvs clock
2018-03-15Merge tag 'uniphier-dt-v4.17' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt Pull "UniPhier ARM SoC DT updates for v4.17" from Masahiro Yamada: - add sound support - add ethernet support - use proper SPDX-License-Identifier style * tag 'uniphier-dt-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: ARM: dts: uniphier: add sound node for PXs2 arm64: dts: uniphier: use proper SPDX-License-Identifier style ARM: dts: uniphier: use proper SPDX-License-Identifier style arm64: dts: uniphier: add fixed regulators for audio codec arm64: dts: uniphier: add AVE ethernet node ARM: dts: uniphier: add AVE ethernet node arm64: dts: uniphier: add compress audio out for LD11/LD20 arm64: dts: uniphier: add speaker out for LD11/LD20 boards arm64: dts: uniphier: add sound node ARM: dts: uniphier: add audio in/out pin-mux node
2018-03-15Merge tag 'aspeed-4.17-devicetree' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt Pull "ASPEED device tree updates for 4.17" from Joel Stanley: Updates to OpenPower BMC systems: A number of updates to use recently merged drivers, including moving to upstreamed IPMI BT nodes, a temp sensor for Romulus, and adding simple-reset for UARTs. This includes more of Palmetto's device tree, so that it's ever so close to booting the host with an upstream kernel. New machines: Add Qualcomm Centriq ARM64 server reference platform, which will run OpenBMC on an AST2500. * tag 'aspeed-4.17-devicetree' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Add Qualcomm Centriq 2400 REP BMC ARM: dts: aspeed: romulus: Add w83773g temp sensor ARM: dts: aspeed: romulus: hog GPIOS7 ARM: dts: romulus: Remove MAX31785 device ARM: dts: palmetto: Request mux as per strapping configuration ARM: dts: palmetto: Enable rear UART ARM: dts: aspeed: Add LPC reset controller node ARM: dts: aspeed: Add Palmetto GPIO hogs ARM: dts: palmetto: Add LEDs and GPIO keys ARM: dts: aspeed: Add LPC clock phandles ARM: dts: aspeed-g5: Update LPC node ARM: dts: aspeed: Enable IPMI BT node on OpenPower machines ARM: dts: aspeed: Add IPMI BT node
2018-03-15ARM: dts: uniphier: add sound node for PXs2Katsuhiro Suzuki
This patch adds audio controller, external codec and simple card node of UniPhier AIO sound system for PXs2 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-15arm64: dts: uniphier: use proper SPDX-License-Identifier styleMasahiro Yamada
According to Documentation/process/license-rules.rst, move the SPDX License Identifier to the very top of the file. I used C++ comment style not only for the SPDX line but for the entire block because this seems Linus' preference [1]. I also dropped the parentheses to follow the examples in that document. [1] https://lkml.org/lkml/2017/11/25/133 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-15ARM: dts: uniphier: use proper SPDX-License-Identifier styleMasahiro Yamada
According to Documentation/process/license-rules.rst, move the SPDX License Identifier to the very top of the file. I used C++ comment style not only for the SPDX line but for the entire block because this seems Linus' preference [1]. I also dropped the parentheses to follow the examples in that document. [1] https://lkml.org/lkml/2017/11/25/133 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-15arm64: dts: uniphier: add fixed regulators for audio codecKatsuhiro Suzuki
This patch adds regulators that have fixed voltage for audio codec on UniPhier LD11/20 Global boards. This patch fixes warnings about TAS57xx audio codec such as "tas571x 0-001b: 0-001b supply AVDD not found, using dummy regulator". Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-15arm64: dts: uniphier: add AVE ethernet nodeKunihiko Hayashi
Add nodes of the AVE ethernet controller for LD11 and LD20 SoCs and the boards. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-15ARM: dts: uniphier: add AVE ethernet nodeKunihiko Hayashi
Add nodes of the AVE ethernet controller for Pro4, PXs2, LD6b SoCs and the boards. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-15arm64: dts: uniphier: add compress audio out for LD11/LD20Katsuhiro Suzuki
This patch adds compress audio node for S/PDIF on UniPhier LD11/20 global boards. And adds settings of AIO for it. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-15arm64: dts: uniphier: add speaker out for LD11/LD20 boardsKatsuhiro Suzuki
This patch adds codec node for TI TAS571x on UniPhier LD11/20 global boards. And adds settings of AIO for speaker out. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-15arm64: dts: uniphier: add sound nodeKatsuhiro Suzuki
This patch adds audio controller, codec and simple card node of UniPhier AIO sound system for LD11/20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-15ARM: dts: uniphier: add audio in/out pin-mux nodeKatsuhiro Suzuki
The UniPhier AIO audio system needs I2S data in/out lines and clock signal pins to connect external codec chip. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-15ARM: dts: msm8974: castor: Fix typo and add startup delay in touchscreen nodeCraig Tatlor
The compatible string was mistakenly pulled from the downstream tree and the startup delay property is needed to prevent io errors on initial page select. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-03-14ARM: dts: exynos: Add #sound-dai-cells property to exynos5250 i2s nodesSylwester Nawrocki
The #sound-dai-cells property may be required to reference the CPU DAI properly. This change is required for Snow HDMI audio. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-03-14arm64: tegra: Enable AHCI on Jetson TX1Preetham Ramchandra
Enable AHCI on Jetson TX1 and add sata phy node. Signed-off-by: Preetham Chandru R <pchandru@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-14arm64: tegra: Add SATA node for Tegra210Preetham Ramchandra
Populate the SATA node for Tegra210. Signed-off-by: Preetham Ramchandra <pchandru@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-03-14arm64: dts: renesas: v3msk: add SCIF0 pinsSergei Shtylyov
Add the (previously omitted) SCIF0 pin data to the V3M Starter Kit board's device tree. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-14ARM: dts: aspeed: Add Qualcomm Centriq 2400 REP BMCKen Chen
The Qualcomm Centriq 2400 REP (Reference Evaluation Platform) is an aarch64 Armv8 server platform with an ast2520 BMC. Signed-off-by: Ken Chen <chen.kenyy@inventec.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-03-14ARM: dts: aspeed: romulus: Add w83773g temp sensorLei YU
Signed-off-by: Lei YU <mine260309@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-03-14ARM: dts: aspeed: romulus: hog GPIOS7Lei YU
GPIOS7 shall be pulled low for CPLD to continue the power up sequence. With this hogged as pull-low, the CPLD workaround can be removed in OpenBMC. Signed-off-by: Lei YU <mine260309@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-03-14ARM: dts: romulus: Remove MAX31785 deviceJoel Stanley
Romulus uses ASPEED's fan tach instead of max31785: * Pass1's max31785 is always reset by CPLD * Pass2's max31785 is not connected Signed-off-by: Lei YU <mine260309@gmail.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-03-13Merge tag 'arm-soc/for-4.17/devicetree' of ↵Arnd Bergmann
https://github.com/Broadcom/stblinux into next/dt Pull "Broadcom devicetree changes for 4.17" from Florian Fainelli: This pull request contains Broadcom ARM-based SoCs devicetree changes for 4.17, please pull the following: - Henry fixes the pin functions for the JTAG pins, nothing uses this for now, but it could be backported eventually if deemed appropriate - Stefan fixes the register ranges for the bcm2835-i2s nodes in the binding document definition, he then fixes the probing of the bcm2835-i2s driver by providing an appropriate register range and a missing clock. Stefan also makes sure that the appropriate pull settings are applied to the pins used on the Raspberry Pi Zero Wireless, he then adds the necessary UART node to connected to the BCM43438 Bluetooth adapter on the Pi Zero W. He finally enables USB OTG mode on the Pi Zero W since he became usable again - Baruch adds the necessary Device Tree nodes to support the Raspberry Pi GPIO expander which is controlled via the VC4 firmware - Hiroshi adds the missing LEDs on the Buffalo WZR-900DHP router - Eric adds the DPI hardware block into the BCM283x Device Tree include file for future use when an actual panel is available - Florian updates the Northstar Plus platforms to use port 8 of the internal switch as the CPU/management port since necessary code was added in the b53 switch driver to support that * tag 'arm-soc/for-4.17/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: NSP: Switch to port 8 for CPU port ARM: bcm2835: Add the DPI hardware to the device tree. ARM: dts: BCM5301X: add missing LEDs for Buffalo WZR-900DHP ARM: dts: bcm2835-rpi-zero-w: Enable OTG mode ARM: dts: bcm2835-rpi-zero-w: Add bcm43438 serial slave ARM: dts: bcm283x: Apply pull settings to Zero W relevant groups ARM: dts: bcm2837-rpi-3-b: add GPIO expander ARM: dts: bcm2835: make the firmware node into a bus ARM: dts: bcm283x: Fix probing of bcm2835-i2s dt-bindings: bcm283x: Fix register ranges of bcm2835-i2s ARM: dts: bcm283x: Fix pin function of JTAG pins
2018-03-13Merge tag 'bcm2835-dt-next-2018-03-13' into devicetree/nextFlorian Fainelli
This pull request brings in one last patch to add the BCM2835 DPI controller to the device tree. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-03-13arm64: dts: renesas: r8a7795: Add missing SYS-DMAC2 dmasGeert Uytterhoeven
On R-Car H3, on-chip peripheral modules that can make use of DMA are wired to either SYS-DMAC0 only, or to both SYS-DMAC1 and SYS-DMAC2. Add the missing DMA properties pointing to SYS-DMAC2 for HSCIF[0-2], SCIF[0125], and I2C[0-2]. These were initially left out because early firmware versions prohibited using SYS-DMAC2. This restriction has been lifted in IPL and Secure Monitor Rev1.0.6 (released on Feb 25, 2016). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a7795: Add IPMMU-PV1 device nodeSimon Horman
Add r8a7795 IPMMU-PV1 and keep it disabled by default. This device is not present in r8a7795 ES1.x and is removed from the DT of those SoCs. This corrects an omission in 3b7e7848f0e8 ("arm64: dts: renesas: r8a7795: Add IPMMU device nodes") This does not have any runtime effect. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
2018-03-13arm64: dts: renesas: r8a77970: sort subnodes of root node alphabeticallyGeert Uytterhoeven
Sort root sub-nodes alphabetically for allow for easier maintenance of this file. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: eagle: add I2C0 supportSergei Shtylyov
Define the Eagle board dependent part of the I2C0 device node. The I2C0 bus is populated by ON Semiconductor PCA9653 I/O expander and Analog Devices ADV7511W HDMI transmitter (but we're only describing the former chip now). Based on the original (and large) patch by Vladimir Barinov. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77970: add I2C supportSergei Shtylyov
Define the generic R8A77970 parts of the I2C[0-4] device node. Based on the original (and large) patch by Daisuke Matsushita <daisuke.matsushita.ns@hitachi.com>. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965-salvator-xs: Add SoC name to file headerGeert Uytterhoeven
Document clearly which SoC this DTS applies to, to distinguish from Salvator-XS boards equipped with other SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add EtherAVB device nodeJacopo Mondi
Populate the ethernet@e6800000 device node to enable Ethernet interface for R-Car M3-N (R8A77965) SoC. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77970: Set EtherAVB phy mode to "rgmii"Jacopo Mondi
Set the "phy-mode" property of EtherAVB device to "rgmii" and let board files override it if the installed PHY layer provides delays for the RX/TX channels. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77995: Set EtherAVB phy mode to "rgmii"Jacopo Mondi
Set the "phy-mode" property of EtherAVB device to "rgmii" and let board files override it if the installed PHY layer provides delays for the RX/TX channels. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit (git 2.34.1) at 2025-09-11 15:10:02 +0000