summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-13arm64: dts: renesas: r8a7795: Set EtherAVB phy mode to "rgmii"Jacopo Mondi
Set the "phy-mode" property of EtherAVB device to "rgmii" and let board files override it if the installed PHY layer provides delays for the RX/TX channels. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a7796: Set EtherAVB phy mode to "rgmii"Jacopo Mondi
Set the "phy-mode" property of EtherAVB device to "rgmii" and let board files override it if the installed PHY layer provides delays for the RX/TX channels. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: v3msk: Override EtherAVB phy-modeJacopo Mondi
As the PHY interface installed on the V3MSK board provides TX and RX channels delays, make the "phy-mode" property a board-specific one, meant to override the one specified in the SoC DTSI. Follow up patches will reset the r8a77970 SoC DTSI to use "rgmii" mode and let the board file override that. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: eagle: Override EtherAVB phy-modeJacopo Mondi
As the PHY interface installed on the Eagle board provides TX and RX channels delays, make the "phy-mode" property a board-specific one, meant to override the one specified in the SoC DTSI. Follow up patches will reset the r8a77970 SoC DTSI to use "rgmii" mode and let the board file override that. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: draak: Override EtherAVB phy-modeJacopo Mondi
As the PHY interface installed on the Draak board, provides TX channel delay, make the "phy-mode" property a board-specific one, meant to override the one specified in the SoC DTSI. Follow up patches will reset the r8a77995 SoC DTSI to use "rgmii" mode and let the board file override that. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: ulcb: Override EtherAVB phy-modeJacopo Mondi
As the PHY interface installed on the ULCB board provides TX channel delay, make the "phy-mode" property a board-specific one, meant to override the one specified in the SoC DTSI. Follow up patches will reset the r8a7795/96 SoC DTSI to use "rgmii" mode\ and let the board files override that. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: salvator-common: Override EtherAVB phy-modeJacopo Mondi
As the PHY interface installed on the Salvator-X[S] board, provides TX channel delay, make the "phy-mode" property a board-specific one, meant to override the one specified in the SoC DTSI. Follow up patches will reset the r8a7795/96/965 SoC DTSI to use "rgmii" mode and let the board files override that. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add INTC-EX device nodeGeert Uytterhoeven
Populate the device node for the Interrupt Controller for External Devices (INTC-EX) on R-Car M3-N, which serves external IRQ pins IRQ[0-5]. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add IIC-DVFS device nodeGeert Uytterhoeven
Populate the device node for the IIC Bus Interface for DVFS (IIC for DVFS) on R-Car M3-N, and add an alias to fix its bus number. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-NTakeshi Kihara
Add initial support for the Renesas Salvator-XS (Salvator-X 2nd version) development board equipped with an R-Car M3-N SiP. Most features are enabled through the shared salvator-xs.dtsi board description. The memory configuration is specific to the M3-N SiP. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Switch to SPDX-License-Identifier, update patch description] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Move usb2_phy1 upJacopo Mondi
Move "usb2_ph1" place-holder device node next to "usb2_phy0" one. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add #interrupt-cells propertyJacopo Mondi
Add "#interrupt-cells" property and "interrupt-controller" label to "interrupt-controller@e61c0000" device node. This silences the following DTC compiler warnings: Warning (interrupts_property): Missing interrupt-controller or interrupt-map property in /soc/interrupt-controller@e61c0000 Warning (interrupts_property): Missing #interrupt-cells in interrupt-parent /soc/interrupt-controller@e61c000 Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add #pwm-cells propertyJacopo Mondi
Add "#pwm-cells" property to "pwm@e6e31000" device node. This silences the following DTC compiler warning: Warning (pwms_property): Missing property '#pwm-cells' in node /soc/pwm@e6e31000 or bad phandle (referred from /backlight:pwms[0]) Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add #phy-cells propertyJacopo Mondi
Add "#phy-cells" property to "usb-phy@e65ee000" device node. This silences the following DTC compiler warning: Warning (phys_property): Missing property '#phy-cells' in node /soc/usb-phy@e65ee000 or bad phandle (referred from /soc/usb@ee020000:phys[0]) Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Remove stale reg propertyJacopo Mondi
Remove "reg" property from cache-controller-0 device node as it does not have any unit address. This silences the following DTC compiler warning: Warning (unit_address_vs_reg): Node /cpus/cache-controller-0 has a reg or ranges property, but no unit name Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add #address-cells and #size-cellsJacopo Mondi
Add "#address-cells" and "#size-cells" properties to all place-holder nodes that have children nodes defined by salvator-x[s].dtsi device tree. This silences the following DTC compiler warnings: Warning (reg_format): "reg" property in /soc/.. has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/... Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/... Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add "reg" propertiesJacopo Mondi
Add "reg" properties to place-holder nodes with unit address defined for R-Car M3-N SoC. This silences the following DTC compiler warning: Warning (unit_address_vs_reg): Node /soc/... has a unit name, but no reg property Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add GPIO nodesJacopo Mondi
Add GPIO nodes to r8a77965 SoC device tree file. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add SCIF device nodesJacopo Mondi
Add SCIF[0-5] device nodes for M3-N (r8a77965) SoC. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a77965: Add dmac device nodsJacopo Mondi
Add dmac[0-2] device nodes for R-Car M3-N (r8a77965) SoC. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: Add R-Car Salvator-x M3-N supportJacopo Mondi
Add basic support for R-Car Salvator-X M3-N (R8A77965) board. Based on original work from: Takeshi Kihara <takeshi.kihara.df@renesas.com> Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: initial R8A77965 SoC device treeJacopo Mondi
Basic support for the Gen 3 R-Car M3-N SoC. Based on original work from: Takeshi Kihara <takeshi.kihara.df@renesas.com> Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: add Renesas R8A77965 supportJacopo Mondi
Add configuration option for the R-Car M3-N (R8A77965) SoC. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a7795: Update OPPs to support CA53 dfsDien Pham
Describe frequencies, other than the default for CA53 cores. This is a pre-requisite for using providing alternative frequencies for use with CPUFreq with these cores. Signed-off-by: Dien Pham <dien.pham.ry@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: renesas: r8a7796: Update OPPs to support CA53 dfsDien Pham
Describe frequencies, other than the default for CA53 cores. This is a pre-requisite for using providing alternative frequencies for use with CPUFreq with these cores. Signed-off-by: Dien Pham <dien.pham.ry@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-03-13arm64: dts: rockchip: remove keep-power-in-suspend from sdhci of rk3399-sapphireShawn Lin
sdhci for rk3399-sapphire works for eMMC but keep-power-in-suspend is an optional property for SDIO. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-12ARM: dts: NSP: Switch to port 8 for CPU portFlorian Fainelli
Now that we have added support for pre-pended Broadcom tags with commit 11606039604c ("net: dsa: b53: Support prepended Broadcom tags") we can switch all the Northstar Plus reference boards to use port 8 for the CPU port. This allows us to prepare room for supporting the Flow Accelerator 2 NAPT offload, and frees up port 5 to be made fully configurable for the modes that it supports: internal, SGMII, RGMII etc. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2018-03-12ARM: bcm2835: Add the DPI hardware to the device tree.Eric Anholt
It's currently marked disabled, as it's not useful without a panel associated with it and the GPIO pins routed to ALT2. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
2018-03-12ARM: dts: exynos: Fix "debounce-interval" property misspelling in MidasGeert Uytterhoeven
"debounce-inteval" was never supported. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-03-12ARM: dts: Keystone: add ECC error handler supportMurali Karicheri
Add emif node for keystone2 devices, which is used for ECC support. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> [t-kristo@ti.com: made emif enabled by default for all keystone2 devices] Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-12ARM: dts: keystone-k2g: add watchdog supportTero Kristo
Add a watchdog node for keystone-k2g, with the corresponding clock and power domain handles. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-12Merge tag 'at91-ab-4.17-dt' of ↵Arnd Bergmann
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt Pull "AT91 DT for 4.17" from Alexandre Belloni: Not much this cycle, mainly changes on the Axentia boards from Peter and a cleanup from Bartosz: - use 'atmel' as at24 manufacturer - device addition and fixes for axentia boards - fix sama5d4 pinctrl compatible * tag 'at91-ab-4.17-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: use 'atmel' as at24 manufacturer for at91sam9263ek ARM: dts: at91: use 'atmel' as at24 manufacturer for at91-sama5d2_ptc_ek ARM: dts: at91: use 'atmel' as at24 manufacturer for at91sam9g20ek ARM: dts: at91: use 'atmel' as at24 manufacturer for at91sam9260ek ARM: dts: at91: use 'atmel' as at24 manufacturer for sama5d34ek ARM: dts: at91: sama5d4: fix pinctrl compatible string ARM: dts: at91: tse850: make the sound dai cell count explicit ARM: dts: at91: nattis: add lvds-encoder ARM: dts: at91: nattis: use up-to-date mtd partitions ARM: dts: at91: tse850: use the correct compatible for the eeprom ARM: dts: at91: nattis: use the correct compatible for the eeprom ARM: dts: at91: sam9rl: Properly assign copyright
2018-03-12Merge tag 'mvebu-dt64-4.17-1' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/dt Pull "mvebu dt64 for 4.17 (part 1)" from Gregory CLEMENT: - convert to the SPDX-License-Identifier - add missing clocks (for the registers) on some of the peripherals - use the new nand driver - add more uart for Armada 7K/8K SoCs * tag 'mvebu-dt64-4.17-1' of git://git.infradead.org/linux-mvebu: ARM64: dts: marvell: armada-cp110: Add apb_pclk clock for the uart nodes arm64: dts: marvell: use reworked NAND controller driver on Armada 8K arm64: dts: marvell: use reworked NAND controller driver on Armada 7K ARM64: dts: marvell: armada-cp110: Add registers clock for sata node arm64: dts: marvell: armada-8080-db: use SPDX-License-Identifier arm64: dts: marvell: armada-8040-mcbin: use SPDX-License-Identifier arm64: dts: marvell: armada-8040-db: use SPDX-License-Identifier arm64: dts: marvell: armada-7040-db: use SPDX-License-Identifier arm64: dts: marvell: armada-3720-espressobin: use SPDX-License-Identifier arm64: dts: marvell: armada-3720-db: use SPDX-License-Identifier arm64: dts: marvell: use SPDX-License-Identifier for Armada SoCs arm64: dts: marvell: mcbin: fix board name typo arm64: dts: marvell: mcbin: enable uart headers arm64: dts: marvell: add CP110 uart peripherals ARM64: dts: marvell: armada-cp110: Add registers clock for I2C nodes ARM64: dts: marvell: armada-cp110: Add registers clock for SPI nodes
2018-03-12Merge tag 'mvebu-dt-4.17-1' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann
Pull "mvebu dt for 4.17 (part 1)" from Gregory CLEMENT: Most of them are small fixes or cleanup. Only the change on the clearfog will have a noticeable effect allowing to use the i2c at an higher frequency. * tag 'mvebu-dt-4.17-1' of git://git.infradead.org/linux-mvebu: ARM: dts: armada388-clearfog: increase speed of i2c0 to 400kHz arm: dts: kirkwood: fix error in #sound-dai-cells size ARM: dts: kirkwood: Fix "debounce-interval" property misspelling ARM: dts: armada: netgear-rn*: fix rtc node name
2018-03-12Merge tag 'hisi-arm64-dt-for-4.17' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann
into next/dt Pull "ARM64: DT: Hisilicon SoC DT updates for 4.17" from Wei Xu: - Add XGE CPLD control support for hip07 SoC - Disable the SMMU on hip06 and hip07 SoCs becuase of the hardware limitation - Enable HS200 mode for the MMC controller on hi6220 hikey board - Remove "cooling-{min|max}-level" this kind unused properties for hi6220 SoC - Add watchdog node for hi6220 SoC - Remove "CPU_NAP" idle state on hikey960 board since it is not stable and useless with the updated firmware * tag 'hisi-arm64-dt-for-4.17' of git://github.com/hisilicon/linux-hisi: arm64: dts: Hi3660: Remove 'CPU_NAP' idle state arm64: dts: hi6220: enable watchdog ARM64: dts: hi6220: Remove "cooling-{min|max}-level" for CPU nodes arm64: dts: hikey: Enable HS200 mode on eMMC arm64: dts: hisi: Disable hisilicon smmu node on hip06/hip07 arm64: dts: hisi: add hns-dsaf cpld control for the hip07 SoC
2018-03-12Merge tag 'xilinx-dt-for-4.17' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
next/dt Pull "arm: Xilinx(Zynq and ZynqMP) DT changes for v4.17" from Michal Simek: - Use SPDX license identifier - Add Xilinx ZynqMP boards zcu100-revC, zcu102-revA/revB/rev1.0, zcu104-revA, zcu106-revA, zcu111-revA, zc1751 dc1/dc2/dc3/dc4 - Add Xilinx Zynq boards cc108, zc770 dc1/dc2/dc3/dc4 - Add Digilent Zybo Z7 - Minor fixes in current DTSes * tag 'xilinx-dt-for-4.17' of https://github.com/Xilinx/linux-xlnx: (22 commits) arm: dts: zynq: Add Digilent Zybo Z7 board arm: zynq: Add support for Xilinx zc770 xm013 dc4 board arm: zynq: Add support for Xilinx zc770 xm012 dc3 board arm: zynq: Add support for Xilinx zc770 xm011 dc2 board arm: zynq: Add support for Xilinx zc770 xm010 dc1 board arm: zynq: Add Xilinx cc108 board arm: zynq: Add missing address node name in microzed board arm: dts: zynq: Use SPDX-License-Identifier arm: zynq: Use i2c-mux instead of i2cswitch for pca9548 arm64: zynqmp: Add support for Xilinx zc1751 arm64: zynqmp: Add support for Xilinx zc12XX boards arm64: zynqmp: Add support for Xilinx zcu111-revA arm64: zynqmp: Add support for Xilinx zcu106-revA arm64: zynqmp: Add support for Xilinx zcu104-revA arm64: zynqmp: Add support for Xilinx zcu102 arm64: zynqmp: Add support for Xilinx zcu100-revC dt-bindings: xilinx: Add description for ZynqMP arm64: zynqmp: Add 8-bit bus width property for ep108 arm64: zynqmp: Added OOB timing settings in zynqmp-ep108.dts arm64: zynqmp: Add SPDX license identifier ...
2018-03-12arm: dts: mt7623: fix USB initialization fails on bananapi-r2Sean Wang
Fix that USB initialization fails as below runtime log is present during booting on bananapi-r2 board by adding missing regulators the USB device requires. Current regulators USB device uses are being updated with the correct ones to reflect real configurations which are all from fixed regulators rather than MT6323 one's output. xhci-mtk 1a1c0000.usb: 1a1c0000.usb supply vbus not found, using dummy regulator xhci-mtk 1a240000.usb: 1a240000.usb supply vbus not found, using dummy regulator Cc: stable@vger.kernel.org Fixes: f4ff257cd160 ("arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board") Signed-off-by: Sean Wang <sean.wang@mediatek.com> [mb: update kernel log in commit message] Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-12arm64: dts: rockchip: assign clock rate for ACLK_VIO on rk3399Shunqian Zheng
The ACLK_VIO is a parent clock used by a several children, its suggested clock rate is 400MHz. Right now it gets 400MHz because it sources from CPLL(800M) and divides by 2 after reset. It's good not to rely on default values like this, so let's explicitly set it. NOTE: it's expected that at least one board may override cru node and set the CPLL to 1.6 GHz. On that board it will be very important to be explicit about aclk-vio being 400 MHz. Signed-off-by: Shunqian Zheng <zhengsq@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2018-03-12dt-bindings: arm: mediatek: add support for more mt7623 reference boardsSean Wang
Update binding document for more mt7623[A,N] reference boards being supported. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-12ARM: dts: sun8i: reference tablet design: Enable PMIC power suppliesChen-Yu Tsai
The A23/A33 reference tablet design has a DC barrel tied to the ACIN of the PMIC. And being a tablet, it has a Li-Po battery. Enable both power supplies in the device tree. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-12ARM: dts: sun8i: a33: Enable A33 internal audio codec on A33-OLinuXinoChen-Yu Tsai
The A33-OLinuXino routes the SoC's headphone output to a headphone jack, and the microphone input to a microphone jack. Power to the microphone is provided by MBIAS. This patch enables the various parts of the codec, and adds widgets and routes for simple-card. HBIAS is connected to the microphone jack as well, but in a manner that is confusing and likely does not provide power. This part is left out of this patch. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-12ARM: dts: sun8i: a33: Enable PMIC power supplies on A33-OLinuXinoChen-Yu Tsai
The A33-OLinuXino has a DC jack wired to the onboard PMIC's ACIN pins. There is also a battery connector, wired to the PMIC's battery charger. Enable the power supplies for both these components. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-12ARM: dts: sun8i: a33: Drop sunxi-common-regulators.dtsi for A33-OLinuXinoChen-Yu Tsai
None of the common regulators defined in sunxi-common-regulators.dtsi are used for the A33-OLinuXino. Drop the include. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-12ARM: dts: sun8i: a33: Drop GPIO pinmux settings for A33-OLinuXinoChen-Yu Tsai
Normal GPIO usage does not need an additional pinmix setting. Exclusive usage of the pin will be guaranteed by the driver. Drop the extra pinmux settings. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-03-12dt-bindings: ifc: Fix the unit address format in the examplesFabio Estevam
DTC warnings will be seen if these examples are used in a real dts file due to a mismatch in the unit address notation. Align the unit address notation to what is done in the real dts files as per commit f81d7af79575 ("arm64: dts: fsl: fix ifc simple-bus unit address format warnings") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-12ARM: dts: i.MX25: define SSI FIFO depthMartin Kaiser
According to the i.MX25 reference manuals, each SSI has four FIFOs. All of those FIFOs can store up to 15 entries. The fsl_ssi driver's internal default for the FIFO depth in 8. Set our non-default FIFO depth explicitly in the Device Tree. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-11arm64: dts: mt7622: add mmc related device nodesSean Wang
add mmc device nodes and proper setup for used pins Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Jimin Wang <jimin.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-11arm64: dts: mt7622: add usb device nodesChunfeng Yun
add xhci node and usb3 phy nodes Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Tested-by: Jumin Li <jumin.li@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-11arm64: dts: mt7622: add SATA device nodesRyder Lee
This patch adds SATA support fot MT7622. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2018-03-11arm64: dts: mt7622: add PCIe device nodesRyder Lee
This patch adds PCIe support for MT7622. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> [mb: fix type in commit message] Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
generated by cgit (git 2.34.1) at 2025-09-11 19:11:53 +0000