| Age | Commit message (Collapse) | Author |
|---|
|
- Remove "adi," prefix from gpio names.
- Sample gpio is now expected to be active low.
- Convert A0 and A1 gpios to "mode-gpios" gpio array.
- Convert RES0 and RES1 gpios to "resolution-gpios" gpio array.
- Remove extraneous lookup tables.
- Remove unused mode field from state struct.
- Swap argument order of ad2s1210_set_mode() while we are touching this.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20230929-ad2s1210-mainline-v3-13-fa4364281745@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Drew found "CONFIG_DMA_GLOBAL_POOL=y causes ADMA buffer alloc to fail"
the log looks like:
mmc0: Unable to allocate ADMA buffers - falling back to standard DMA
The logic is: generic riscv defconfig selects ARCH_RENESAS then
ARCH_R9A07G043 which selects DMA_GLOBAL_POOL, which assumes all
non-dma-coherent riscv platforms have a dma global pool, this assumption
seems not correct. And I believe DMA_GLOBAL_POOL should not be
selected by ARCH_SOCFAMILIY, instead, only ARCH under some specific
conditions can select it globaly, for example NOMMU ARM and so on,
because it's designed for special cases such as "nommu cases where
non-cacheable memory lives in a fixed place in the physical address
map" as pointed out by Robin.
Fix the issue by making ARCH_R9A07G043 (riscv version) depend on
NONPORTABLE, thus generic defconfig won't select ARCH_R9A07G043 by
default. And even for random config case, there will be less debug
effort once we see NONPORTABLE is enabled.
Reported-by: Drew Fustini <dfustini@baylibre.com>
Closes: https://lore.kernel.org/linux-riscv/ZRuamJuShOnvP1pr@x1/
Fixes: 484861e09f3e ("soc: renesas: Kconfig: Select the required configs for RZ/Five SoC")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20231004150856.2540-1-jszhang@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230810195103.27069-1-ivan.orlov0322@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add some clarifications for patches that have dependencies within the
patch series.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Rule: add
Link: https://lore.kernel.org/stable/20230911203628.20068-1-hugo%40hugovil.com
Link: https://lore.kernel.org/r/20230911203628.20068-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While searching for possible refactor of napi_schedule_prep and
__napi_schedule it was notice that the mtk eth driver disable the
interrupt for rx and tx AFTER napi is scheduled.
While this is a very hard to repro case it might happen to have
situation where the interrupt is disabled and never enabled again as the
napi completes and the interrupt is enabled before.
This is caused by the fact that a napi driven by interrupt expect a
logic with:
1. interrupt received. napi prepared -> interrupt disabled -> napi
scheduled
2. napi triggered. ring cleared -> interrupt enabled -> wait for new
interrupt
To prevent this case, disable the interrupt BEFORE the napi is
scheduled.
Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20231002140805.568-1-ansuelsmth@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This allows splicing zeroed pages into a pipe, and allows discarding
pages from a pipe by splicing them to /dev/zero. Writing to /dev/zero
should have the same effect as writing to /dev/null, and a
"splice_write" implementation exists only for /dev/null.
(The /dev/zero splice_read implementation could be optimized by
pushing references to the global zero page to the pipe, but that's an
optimization for another day.)
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/20230919073743.1066313-1-max.kellermann@ionos.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
Let's refactor this function to just use synth_write().
Link: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings[1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20230918-strncpy-drivers-accessibility-speakup-kobjects-c-v2-1-d5b1976c5dbf@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct hpets.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175348.work.056-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect `c2dev->name` to be NUL-terminated based on its usage with
format strings:
| dev_info(c2dev->dev, "C2 port %s removed\n", c2dev->name);
Moreover, NUL-padding is _not_ required as c2dev is zero-allocated:
| c2dev = kzalloc(sizeof(struct c2port_device), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also drop `C2PORT_NAME_LEN - 1` for `sizeof(dest)` which is more
idiomatic strscpy usage.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230927-strncpy-drivers-misc-c2port-core-c-v1-1-978f6d220a54@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The word "wich"
was corrected to "which" for spelling accuracy.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20230903204250.2697370-1-visitorckw@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/5c3b7459b820e22e2ac6ce892d4aadcc119cc919.1696065263.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends
not being declared. We thus need to add HAS_IOPORT as dependency for
those drivers using them.
This was previously done in commit b5c75b68b7de ("comedi: add HAS_IOPORT
dependencies"), but that has been reverted because it made it impossible
to select configuration options for several comedi drivers. This is a
do-over that avoids that.
Since the original patch, modifications have been made to various comedi
modules so that they can still be built even if the port I/O functions
have not been declared, so the configuration options for building those
modules no longer need to depend on HAS_IOPORT.
Make the COMEDI_ISA_DRIVERS menu option (which allows configuration
options for ISA and PC/104 drivers to be selected) depend on HAS_IOPORT,
and also depend on ISA || ISA_BUS || PC104.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Co-developed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-14-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The amplc_dio200_common module is used by the amplc_dio200 module (for
ISA cards) and the amplc_dio200_pci module (for PCI and PCI Express
cards). It supports both port I/O and memory-mapped I/O.
Port I/O and memory-mapped I/O is confined to the `dio200___read8()`,
`dio200___read32()`, `dio200___write8()` and `dio200___write32()`
functions. Conditionally compile two versions of those functions. If
the `CONFIG_HAS_IOPORT` macro is defined, call either the port I/O or
memory mapped I/O functions depending on the `mmio` member of the
`struct comedi_device`. If the `CONFIG_HAS_IOPORT` macro is undefined
only call the memory-mapped I/O functions.
Add a run-time check to `amplc_dio200_common_attach()` to return an
error if the device wants to use port I/O when the `CONFIG_HAS_IOPORT`
macro is undefined.
The changes allow the module to be built even if the port I/O functions
have not been declared.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-13-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The `dio200_read8()`, `dio200_write8()`, `dio200_read32()` and
`dio200_write32()` functions apply a right-shift to the register offset
for some devices and then perform the actual register access. Factor
the register access part out to new functions `dio200___read8()`,
`dio200___write8()`, `dio200___read32()`, and `dio200___write32()`.
This will reduce duplicated code in a subsequent patch that will
conditionally compile support for port I/O as part of the `HAS_IOPORT`
changes.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-12-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The amplc_dio200_pci module supports various Amplicon PCI and PCI
Express devices. Some of the supported devices (the PCI ones) use port
I/O, and some of them (the PCIe ones) only use memory-mapped I/O.
Conditionally compile in support for the devices that need port I/O if
and only if the `CONFIG_HAS_IOPORT` macro is defined.
Add a run-time check in `dio200_pci_auto_attach()` to return an error if
the device actually requires port I/O (based on the PCI BAR resource
flags) but the `HAS_IOPORT` configuration option is not enabled.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-11-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The "ni_mio_common.c" file contains calls to both port I/O functions and
memory-mapped I/O functions. The file is `#include`d by "ni_atmio.c",
"ni_mio_cs.c", and "ni_pcimio.c" for the ni_atmio, ni_mio_cs, and
ni_pcimio modules, respectively. Only "ni_pcimio.c" defines the
`PCIDMA` macro before including "ni_mio_common.c" and various bits of
code in "ni_mio_common.c" is conditionally compiled according to whether
that macro is defined or not. Currently, the port I/O function calls
are compiled in regardless of whether the `PCIDMA` macro is defined or
not. However, the fact is that the ni_atmio and ni_mio_cs modules will
never call the memory-mapped I/O functions, and the ni_pcimio module
will never call the port I/O functions.
Calls to the port I/O and memory-mapped I/O functions is confined to the
`ni_writel()`, `ni_writew()`, `ni_writeb()`, `ni_readl()`, `ni_readw()`,
and `ni_readb()` functions which do a run-time test to decide whether to
call the port I/O functions or the memory-mapped I/O functions.
Conditionally compile two variants of the functions so they only call
the port I/O functions if the `PCIDMA` macro is undefined (for the
ni_atmio and ni_mio_cs modules), and only call the memory-mapped I/O
functions if the `PCIDMA` macro is defined (for the ni_pcimio module).
Add a run-time check in the `ni_E_init()` function to return an error if
the comedi device has been set up to use port I/O if `PCIDMA` is
defined, or has been set up to use memory-mapped I/O if `PCIDMA` is not
defined.
The changes make it possible to build the ni_pcimio module even if the
port I/O functions have not been declared. (The ni_atmio and ni_mio_cs
modules do still require the port I/O functions to be declared.)
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-10-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The ni_labpc_common module is used by the ni_labpc module (for ISA
cards), the ni_labpc_cs module (for PCMCIA cards), and the ni_labpc_pci
module (for PCI cards). The ISA and PCMCIA cards use port I/O and the
PCI cards use memory-mapped I/O.
Conditionally compile the parts of the module that use the port I/O
functions so they are compiled if and only if the `CONFIG_HAS_IOPORT`
macro is defined, so that the module can be built if the port I/O
functions have not been declared.
Add a run-time check in the `labpc_common_attach()` to return an error
if the comedi device wants to use port I/O when the `CONFIG_HAS_IOPORT`
macro is undefined.
The changes allow the module to be built even if the port I/O functions
have not been declared.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-9-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The comedi_8255 module supports both port I/O and memory-mapped I/O.
Conditionally compile the parts of the module that use port I/O if and
only if the `CONFIG_HAS_IOPORT` macro is defined so that it can still be
built if the port I/O functions have not been declared. If the
`CONFIG_HAS_IOPORT` macro is undefined, replace the GPL-exported
`subdev_8255_io_init()` function with a dummy static inline version that
just returns `-ENXIO`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-8-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Comedi drivers can initialize an 8255 subdevice in I/O space by calling
`subdev_8255_init()`, or in memory-mapped I/O space by calling
`subdev_8255_mm_init()`, or by supplying a call-back function pointer
and context to either of those functions. Change it so that a new
function `subdev_8255_cb_init()` shall be called instead when supplying
a callback function and context, and remove the call-back function
parameter from `subdev_8255_init()` and `subdev_8255_mm_init()`.
Also rename `subdev_8255_init()` to `subdev_8255_io_init()`. The
parameters are changing, so might as well rename it at the same time.
Also rename the `regbase` member of `struct subdev_8255_private` to
`context` since this holds the context for the call-back function call.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-7-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends will only be declared in the `HAS_IOPORT` configuration option
is enabled.
The 8255_pci module supports PCI digital I/O devices from various
manufacturers that consist of one or more 8255 Programmable Peripheral
Interface chips (or equivalent hardware) to provide their digital I/O
ports. Some of the devices use port I/O and some only use memory-mapped
I/O.
Conditionally compile in support for the devices that need port I/O if
and only if the `CONFIG_HAS_IOPORT` macro is defined. Change
`pci_8255_auto_attach()` to return an error if the device actually
requires port I/O (based on the PCI BAR resource flags) but the
`HAS_IOPORT` configuration is not enabled.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-6-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The comedi_8254 module supports both port I/O and memory-mapped I/O.
In a future patch, the port I/O functions (`inb()`, `outb()`, and
friends) will only be declared if the `HAS_IOPORT` configuration option
is enabled.
Conditionally compile the parts of the module that use port I/O so they
are compiled if and only if the `CONFIG_HAS_IOPORT` macro is defined, so
that it can still be built if the port I/O functions have not been
declared. If `CONFIG_HAS_IOPORT` is undefined, replace the GPL-exported
`comedi_8254_io_alloc()` function with a dummy static inline version
that just returns `ERR_PTR(-ENXIO)`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-5-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
`comedi_8254_init()` and `comedi_8254_mm_init()` return `NULL` on
failure, but the failure is not necessarily due to lack of memory.
Change them to return an `ERR_PTR` value on failure and rename the
functions to make it obvious the API has changed. `comedi_8254_init()`
has been replaced with `comedi_8254_io_alloc()`, and
`comedi_8254_mm_init()` has been replaced with `comedi_8254_mm_alloc()`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-4-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rework the comedi_8254 module to use a call-back function for register
access. This will make it easier to isolate the parts that will depend
on the `CONFIG_HAS_IOPORT` macro being defined and also allows the
possibility of supplying an external callback function during
initialization by a variant of the `comedi_8254_init()` and
`comedi_8254_mm_init()` functions, although that has not been
implemented yet.
The `struct comedi_8254` members have been changed to use a pointer to a
callback function and a context of type `unsigned long`. The
`comedi_8254_init()` and `comedi_8254_mm_init()` functions use an
internal callback function and set the context to the base address of
the registers (for `comedi_8254_mm_init()` that involves converting a
`void __iomem *` to `unsigned long`).
A minor change to `dio200_subdev_8254_offset()` in the
amplc_dio200_common module has been made due to the changes in `struct
comedi_8254`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ni_pcidio module does not depend on the comedi_8255 module, so
change the `COMEDI_NI_PCIDIO` configuration option to not select
`COMEDI_8255` and remove the inherited dependency on `HAS_IOPORT`.
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20230913170712.111719-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We expect both `kim_data->dev_name` and `kim_gdata->dev_name` to be
NUL-terminated.
`kim_data->dev_name` seems to not require NUL-padding.
`kim_gdata` is already zero-allocated and as such does not require
NUL-padding:
| kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_KERNEL);
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer
without unnecessarily NUL-padding.
Let's also opt to use the more idiomatic strscpy usage of:
strscpy(dest, src, sizeof(dest))
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231003-strncpy-drivers-misc-ti-st-st_kim-c-v2-1-79630447b0a1@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
`strncpy` is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on the destination buffer without
unnecessarily NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230927-strncpy-drivers-misc-ibmvmc-c-v1-1-29f56cd3a269@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix grammar and punctuation.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230930221428.18463-3-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct bcm_vk_wkent.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Scott Branden <scott.branden@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175057.work.558-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Like various other devices using similar hardware, this model reports a
perpetually empty battery (0-1%).
Join the others and apply HID_BATTERY_QUIRK_IGNORE.
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
The EHL (Elkhart Lake) based platforms provide a OOB (Out of band)
service, which allows to wakup device when the system is in S5 (Soft-Off
state). This OOB service can be enabled/disabled from BIOS settings. When
enabled, the ISH device gets PME wake capability. To enable PME wakeup,
driver also needs to enable ACPI GPE bit.
On resume, BIOS will clear the wakeup bit. So driver need to re-enable it
in resume function to keep the next wakeup capability. But this BIOS
clearing of wakeup bit doesn't decrement internal OS GPE reference count,
so this reenabling on every resume will cause reference count to overflow.
So first disable and reenable ACPI GPE bit using acpi_disable_gpe().
Fixes: 2e23a70edabe ("HID: intel-ish-hid: ipc: finish power flow for EHL OOB")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Closes: https://lore.kernel.org/lkml/CAAd53p4=oLYiH2YbVSmrPNj1zpMcfp=Wxbasb5vhMXOWCArLCg@mail.gmail.com/T/
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
usb_free_urb() does the NULL check itself, so there is no need to duplicate
it prior to calling.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e1cd4004cde7c9 ("HID: sony: Fix a potential memory leak in sony_probe()")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
When suspending the computer, a Switch Pro Controller connected via USB will
lose its internal status. However, because the USB connection was technically
never lost, when resuming the computer, the driver will attempt to communicate
with the controller as if nothing happened (and fail).
Because of this, the user was forced to manually disconnect the controller
(or to press the sync button on the controller to power it off), so that it
can be re-initialized.
With this patch, the controller will be automatically re-initialized after
resuming from suspend.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216233
Signed-off-by: Martino Fontana <tinozzo123@gmail.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
handling path
The commit in Fixes updated the error handling path of
thunderstrike_create() and the remove function but not the error handling
path of shield_probe(), should an error occur after a successful
thunderstrike_create() call.
Add the missing calls.
Fixes: 3ab196f88237 ("HID: nvidia-shield: Add battery support for Thunderstrike")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
error handling path
The commit in Fixes updated the error handling path of
thunderstrike_create() and the remove function but not the error handling
path of shield_probe(), should an error occur after a successful
thunderstrike_create() call.
Add the missing call. Make sure it is safe to call in the probe error
handling path by preventing the led_classdev from attempting to set the LED
brightness to the off state on unregister.
Fixes: f88af60e74a5 ("HID: nvidia-shield: Support LED functionality for Thunderstrike")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Register the Synaptics device as a special multitouch device with certain
quirks that may improve usability of the touchpad device.
Reported-by: Rain <rain@sunshowers.io>
Closes: https://lore.kernel.org/linux-input/2bbb8e1d-1793-4df1-810f-cb0137341ff4@app.fastmail.com/
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
A transaction complete work is allocated and queued for each
transaction. Under certain conditions the work->type might be marked as
BINDER_WORK_TRANSACTION_ONEWAY_SPAM_SUSPECT to notify userspace about
potential spamming threads or as BINDER_WORK_TRANSACTION_PENDING when
the target is currently frozen.
However, these work types are not being handled in binder_release_work()
so they will leak during a cleanup. This was reported by syzkaller with
the following kmemleak dump:
BUG: memory leak
unreferenced object 0xffff88810e2d6de0 (size 32):
comm "syz-executor338", pid 5046, jiffies 4294968230 (age 13.590s)
hex dump (first 32 bytes):
e0 6d 2d 0e 81 88 ff ff e0 6d 2d 0e 81 88 ff ff .m-......m-.....
04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81573b75>] kmalloc_trace+0x25/0x90 mm/slab_common.c:1114
[<ffffffff83d41873>] kmalloc include/linux/slab.h:599 [inline]
[<ffffffff83d41873>] kzalloc include/linux/slab.h:720 [inline]
[<ffffffff83d41873>] binder_transaction+0x573/0x4050 drivers/android/binder.c:3152
[<ffffffff83d45a05>] binder_thread_write+0x6b5/0x1860 drivers/android/binder.c:4010
[<ffffffff83d486dc>] binder_ioctl_write_read drivers/android/binder.c:5066 [inline]
[<ffffffff83d486dc>] binder_ioctl+0x1b2c/0x3cf0 drivers/android/binder.c:5352
[<ffffffff816b25f2>] vfs_ioctl fs/ioctl.c:51 [inline]
[<ffffffff816b25f2>] __do_sys_ioctl fs/ioctl.c:871 [inline]
[<ffffffff816b25f2>] __se_sys_ioctl fs/ioctl.c:857 [inline]
[<ffffffff816b25f2>] __x64_sys_ioctl+0xf2/0x140 fs/ioctl.c:857
[<ffffffff84b30008>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84b30008>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
[<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fix the leaks by kfreeing these work types in binder_release_work() and
handle them as a BINDER_WORK_TRANSACTION_COMPLETE cleanup.
Cc: stable@vger.kernel.org
Fixes: 0567461a7a6e ("binder: return pending info for frozen async txns")
Fixes: a7dc1e6f99df ("binder: tell userspace to dump current backtrace when detected oneway spamming")
Reported-by: syzbot+7f10c1653e35933c0f1e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7f10c1653e35933c0f1e
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20230922175138.230331-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Haiyang Zhang says:
====================
net: mana: Fix some TX processing bugs
Fix TX processing bugs on error handling, tso_bytes calculation,
and sge0 size.
====================
Link: https://lore.kernel.org/r/1696020147-14989-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Handle the case when GSO SKB linear length is too large.
MANA NIC requires GSO packets to put only the header part to SGE0,
otherwise the TX queue may stop at the HW level.
So, use 2 SGEs for the skb linear part which contains more than the
packet header.
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
sizeof(struct hop_jumbo_hdr) is not part of tso_bytes, so remove
the subtraction from header size.
Cc: stable@vger.kernel.org
Fixes: bd7fc6e1957c ("net: mana: Add new MANA VF performance counters for easier troubleshooting")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For an unknown TX CQE error type (probably from a newer hardware),
still free the SKB, update the queue tail, etc., otherwise the
accounting will be wrong.
Also, TX errors can be triggered by injecting corrupted packets, so
replace the WARN_ONCE to ratelimited error logging.
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Need to set the private data with encoder device, or will access
NULL pointer in encoder handler.
Fixes: 1972e32431ed ("media: mediatek: vcodec: Fix possible invalid memory access for encoder")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
spin_lock_irqsave(). Compile tested only.
Fixes: 53618cc1e51e ("Staging: sources for ST core")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230823035020.1281892-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update the firmware_loader documentation and corresponding section
in the MAINTAINERs file with a new email address.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20230929151326.311959-1-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There has been a repeated misunderstanding about what the hardware embargo
list is for. Clarify the language in the process so that it is clear
that only fixes are coordinated. There is explicitly no prenotification
process. The list members are also expected to keep total radio silence
during embargoes.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: workflows@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231004004959.work.258-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Driver was marked deprecated 4 years ago, so it's time to remove it.
This driver is the only i2c client driver using class I2C_CLASS_SPD.
Apparently, as a follow-up step, we can remove I2C_CLASS_SPD
altogether.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/18241458-52db-4537-bead-d570801253c3@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A malloc + strncpy + manual NUL_termination is just kmemdup_nul. Let's use
this interface as it is less error-prone and more readable.
Also drop `csraddr_len` as it is just used in a single place and we can
just do the arithmetic in-line.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230927-strncpy-drivers-misc-eeprom-idt_89hpesx-c-v1-1-08e3d45b8c05@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a fence signals there is a very small race window where the timestamp
isn't updated yet. sync_file solves this by busy waiting for the
timestamp to appear, but on other ocassions didn't handled this
correctly.
Provide a dma_fence_timestamp() helper function for this and use it in
all appropriate cases.
Another alternative would be to grab the spinlock when that happens.
v2 by teddy: add a wait parameter to wait for the timestamp to show up, in case
the accurate timestamp is needed and/or the timestamp is not based on
ktime (e.g. hw timestamp)
v3 chk: drop the parameter again for unified handling
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 1774baa64f93 ("drm/scheduler: Change scheduled fence track v2")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20230929104725.2358-1-christian.koenig@amd.com
|
|
Just a style change so that the device release callbacks are defined
in the same way for devices in mcb_bus and mcb_device.
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Co-developed-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com>
Signed-off-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com>
Link: https://lore.kernel.org/r/20230906114901.63174-3-JoseJavier.Rodriguez@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When calling mcb_bus_add_devices(), both mcb devices and the mcb
bus will attempt to attach a device to a driver because they share
the same bus_type. This causes an issue when trying to cast the
container of the device to mcb_device struct using to_mcb_device(),
leading to a wrong cast when the mcb_bus is added. A crash occurs
when freing the ida resources as the bus numbering of mcb_bus gets
confused with the is_added flag on the mcb_device struct.
The only reason for this cast was to keep an is_added flag on the
mcb_device struct that does not seem necessary. The function
device_attach() handles already bound devices and the mcb subsystem
does nothing special with this is_added flag so remove it completely.
Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device")
Cc: stable <stable@kernel.org>
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Co-developed-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com>
Signed-off-by: Jose Javier Rodriguez Barbarin <JoseJavier.Rodriguez@duagon.com>
Link: https://lore.kernel.org/r/20230906114901.63174-2-JoseJavier.Rodriguez@duagon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pinctrl_gpio_set_config() expects the GPIO number from the global GPIO
numberspace, not the controller-relative offset, which needs to be added
to the chip base.
Fixes: 5ae4cb94b313 ("gpio: aspeed: Add debounce support")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
|
