| Age | Commit message (Collapse) | Author |
|---|
|
The device now reports firmware version thus, removing
the hard coded values of the FW version string and
redundant fw_rev hook from sysfs. Adding code to query
firmware version from underlying device and report it
through the kernel verb to get firmware version string.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
RoCE can be used by virtual functions (VFs) as well. Adding
code changes to allow resource reservation, initialization
and avail the resources to the RDMA applications running on
those VFs.
Currently, fifty percent of the total available resources
are reserved for PF and remaining are equally divided among
active VFs.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
On a I2C_SMBUS_I2C_BLOCK_DATA read request, if data->block[0] is
greater than I2C_SMBUS_BLOCK_MAX + 1, the underlying I2C driver writes
data out of the msgbuf1 array boundary.
It is possible from a user application to run into that issue by
calling the I2C_SMBUS ioctl with data.block[0] greater than
I2C_SMBUS_BLOCK_MAX + 1.
This patch makes the code compliant with
Documentation/i2c/dev-interface by raising an error when the requested
size is larger than 32 bytes.
Call Trace:
[<ffffffff8139f695>] dump_stack+0x67/0x92
[<ffffffff811802a4>] panic+0xc5/0x1eb
[<ffffffff810ecb5f>] ? vprintk_default+0x1f/0x30
[<ffffffff817456d3>] ? i2cdev_ioctl_smbus+0x303/0x320
[<ffffffff8109a68b>] __stack_chk_fail+0x1b/0x20
[<ffffffff817456d3>] i2cdev_ioctl_smbus+0x303/0x320
[<ffffffff81745aed>] i2cdev_ioctl+0x4d/0x1e0
[<ffffffff811f761a>] do_vfs_ioctl+0x2ba/0x490
[<ffffffff81336e43>] ? security_file_ioctl+0x43/0x60
[<ffffffff811f7869>] SyS_ioctl+0x79/0x90
[<ffffffff81a22e97>] entry_SYSCALL_64_fastpath+0x12/0x6a
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
|
|
Reference count of device node was increased in of_i2c_register_device,
but without decreasing it in i2c_unregister_device. Then the added
device node will never be released. Fix this by adding the of_node_put.
Signed-off-by: Lixin Wang <alan.1.wang@nokia-sbell.com>
Tested-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
|
|
Avoid using DM_MAPIO_REQUEUE unless absolutely necessary because it
results in dm-rq.c:dm_mq_queue_rq() returning BLK_STS_RESOURCE to
blk-mq -- doing so should only ever be done if the underlying queue is
out of resources. So switch to returning DM_MAPIO_DELAY_REQUEUE from
multipath_clone_and_map() if either MPATHF_QUEUE_IO or
MPATHF_PG_INIT_REQUIRED are set.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
blk-mq will rerun queue via RESTART or dispatch wake after one request
is completed, so not necessary to wait random time for requeuing, we
should trust blk-mq to do it.
More importantly, we need to return BLK_STS_RESOURCE to blk-mq so that
dequeuing from the I/O scheduler can be stopped, this results in
improved I/O merging.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
If source string is longer than max, kstrndup will allocate max+1
space. So make sure the result will not exceed max.
Signed-off-by: Ma Shimiao <mashimiao.fnst@cn.fujitsu.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The rw_semaphore is acquired for read only in two places, neither is
performance-critical. So replace it with a mutex -- which is more
efficient.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
One can crash dm-flakey by specifying more feature arguments than the
number of features supplied. Checking for null in arg_name avoids
this.
dmsetup create flakey-test --table "0 66076080 flakey /dev/sdb9 0 0 180 2 drop_writes"
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Signed-off-by: mulhern <amulhern@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Make the format string for thinpool status more correct.
Swap the order of two items to correspond with reality.
Signed-off-by: mulhern <amulhern@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Signed-off-by: mulhern <amulhern@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Fixes:
1. The use of "exceeds" when the opposite of exceeds, falls below,
was meant.
2. Properly speaking, a table can not exceed a threshold.
It emphasizes the important point, which is that it is the userspace
daemon's responsibility to check for low free space when a device
is resumed, since it won't get a special event indicating low free
space in that situation.
Signed-off-by: mulhern <amulhern@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Signed-off-by: mulhern <amulhern@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The 'mq' policy is no longer the default policy, and the default policy,
'smq', does not store hit counts.
Signed-off-by: mulhern <amulhern@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Use possessive pronoun where appropriate, instead of contraction.
Signed-off-by: mulhern <amulhern@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Add a note to snapshot.txt that the origin target must be suspended when
loading or unloading the snapshot target.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
If anyone is going to use dm_table_create(), they probably should be
able to use dm_table_destroy() too. Move the dm_table_destroy()
definition outside the private header, near dm_table_create()
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Fixes the following sparse warning:
drivers/md/dm-raid.c:33:1: warning:
symbol 'raid_sets' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
dm_bufio_client_create() does not check result of register_shrinker()
which was tagged as __must_check recently, reported by sparse.
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The client's mutex needs to be destroyed in dm_bufio_client_destroy() as
well as the dm_bufio_client_create() error path.
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Use REQ_OP_READ and REQ_OP_WRITE macros instead of READ and WRITE. They
have the same value, but the block layer uses REQ_OP so bufio should
too.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
This device mapper "unstriped" target remaps and unstripes I/O so it
is issued solely on a single drive in a HW RAID0 or dm-striped target.
In a 4 drive HW RAID0 the striped target exposes 1/4th of the LBA range
as a virtual drive. Each I/O to that virtual drive will only be issued
to the 1 drive that was selected of the 4 drives in the HW RAID0.
This unstriped target is most useful for Intel NVMe drives that have
multiple cores but that do not have firmware control to pin separate LBA
ranges to each discrete cpu core.
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Fix to return error code -ENOMEM from the mempool_create_kmalloc_pool()
error handling case instead of 0, as done elsewhere in this function.
Fixes: ef43aa38063a6 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Loading key via kernel keyring service erases the internal
key copy immediately after we pass it in crypto layer. This is
wrong because IV is initialized later and we use wrong key
for the initialization (instead of real key there's just zeroed
block).
The bug may cause data corruption if key is loaded via kernel keyring
service first and later same crypt device is reactivated using exactly
same key in hexbyte representation, or vice versa. The bug (and fix)
affects only ciphers using following IVs: essiv, lmk and tcw.
Fixes: c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service")
Cc: stable@vger.kernel.org # 4.10+
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Some asynchronous cipher implementations may use DMA. The stack may
be mapped in the vmalloc area that doesn't support DMA. Therefore,
the cipher request and initialization vector shouldn't be on the
stack.
Fix this by allocating the request and iv with kmalloc.
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
If dm-crypt uses authenticated mode with separate MAC, there are two
concatenated part of the key structure - key(s) for encryption and
authentication key.
Add a missing check for authenticated key length. If this key length is
smaller than actually provided key, dm-crypt now properly fails instead
of crashing.
Fixes: ef43aa3806 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)")
Cc: stable@vger.kernel.org # 4.12+
Reported-by: Salah Coronya <salahx@yahoo.com>
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
When inserting a new key/value pair into a btree we walk down the spine of
btree nodes performing the following 2 operations:
i) space for a new entry
ii) adjusting the first key entry if the new key is lower than any in the node.
If the _root_ node is full, the function btree_split_beneath() allocates 2 new
nodes, and redistibutes the root nodes entries between them. The root node is
left with 2 entries corresponding to the 2 new nodes.
btree_split_beneath() then adjusts the spine to point to one of the two new
children. This means the first key is never adjusted if the new key was lower,
ie. operation (ii) gets missed out. This can result in the new key being
'lost' for a period; until another low valued key is inserted that will uncover
it.
This is a serious bug, and quite hard to make trigger in normal use. A
reproducing test case ("thin create devices-in-reverse-order") is
available as part of the thin-provision-tools project:
https://github.com/jthornber/thin-provisioning-tools/blob/master/functional-tests/device-mapper/dm-tests.scm#L593
Fix the issue by changing btree_split_beneath() so it no longer adjusts
the spine. Instead it unlocks both the new nodes, and lets the main
loop in btree_insert_raw() relock the appropriate one and make any
neccessary adjustments.
Cc: stable@vger.kernel.org
Reported-by: Monty Pavel <monty_pavel@sina.com>
Signed-off-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
For btree removal, there is a corner case that a single thread
could takes 6 locks which is more than THIN_MAX_CONCURRENT_LOCKS(5)
and leads to deadlock.
A btree removal might eventually call
rebalance_children()->rebalance3() to rebalance entries of three
neighbor child nodes when shadow_spine has already acquired two
write locks. In rebalance3(), it tries to shadow and acquire the
write locks of all three child nodes. However, shadowing a child
node requires acquiring a read lock of the original child node and
a write lock of the new block. Although the read lock will be
released after block shadowing, shadowing the third child node
in rebalance3() could still take the sixth lock.
(2 write locks for shadow_spine +
2 write locks for the first two child nodes's shadow +
1 write lock for the last child node's shadow +
1 read lock for the last child node)
Cc: stable@vger.kernel.org
Signed-off-by: Dennis Yang <dennisyang@qnap.com>
Acked-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
kvm_valid_sregs()
kvm_valid_sregs() should use X86_CR0_PG and X86_CR4_PAE to check bit
status rather than X86_CR0_PG_BIT and X86_CR4_PAE_BIT. This patch is
to fix it.
Fixes: f29810335965a(KVM/x86: Check input paging mode when cs.l is set)
Reported-by: Jeremi Piotrowski <jeremi.piotrowski@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm
KVM/ARM Fixes for v4.15, Round 3 (v2)
Three more fixes for v4.15 fixing incorrect huge page mappings on systems using
the contigious hint for hugetlbfs; supporting an alternative GICv4 init
sequence; and correctly implementing the ARM SMCC for HVC and SMC handling.
|
|
Turn gfs2_block_truncate_page into a function that zeroes a range within
a block rather than only the end of a block. This will be used for
cleaning the end of the first partial block and the start of the last
partial block when punching a hole in a file.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
In rare cases, the current non-recursive delete algorithm doesn't
deallocate empty intermediary indirect blocks. This should have very
little practical effect, but deallocating all blocks correctly should
still be preferable as it is cleaner and easier to validate.
The fix consists of using the first block to deallocate to compute the
start marker of the truncate point instead of the last block that needs
to be kept. With that change, computing which indirect blocks are still
needed becomes relatively easy.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
The metadata read-ahead algorithm broke when switching from recursive to
non-recursive delete: the current algorithm reads ahead blocks at height
N - 1 while deallocating the blocks at hight N. However, deallocating
the blocks at height N requires a complete walk of the metadata tree,
not only down to height N - 1. Consequently, all blocks below height
N - 1 will be accessed without read-ahead.
Fix this by issuing read-aheads as early as possible, after each
metapath lookup.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Split out the entire lookup loop from lookup_metapath and
fillup_metapath. Make both functions return the actual height in
mp->mp_aheight, and return 0 on success. Handle lookup errors properly
in trunc_dealloc.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
First, this function truncates the file in chunks. When the original
file size isn't block aligned, each chunk that is truncated will remain
be misaligned. This is inefficient.
Second, this function doesn't recognize where holes are, so it loops
through them. For each chunk of a hole, it creates a new transaction.
At least avoid creating another transactions whe the current one is
still empty. (An better fix would be to skip large holes, of course.)
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
The current transaction is being dereferenced before asserting that is
not NULL; that isn't going to help.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Document when to use gfs2_blk2rgrpd for "inexact" resource group
matching. Based on that, fix an incorrect use of gfs2_blk2rgrpd in
sweep_bh_for_rgrps.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
In x86 architecture dependend part function get_cpuid_str() mallocs a
128 byte buffer, but does not check if the memory allocation succeeded
or not.
When the memory allocation fails, function __get_cpuid() is called with
first parameter being a NULL pointer. However this function references
its first parameter and operates on a NULL pointer which might cause
core dumps.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180117131611.34319-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Previously it was only allowed to use at most 10 time slices in 'perf
script --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf script --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-9-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Previously it was only allowed to use at most 10 time slices in 'perf
report --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf report --stdio --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-8-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Previously we use a magic number 10 to limit the number of time slices.
It's not very good.
This patch creates a new function perf_time__range_alloc() to allocate
time slices buffer. The number of buffer entries is determined by the
number of comma in string but at least it will allocate one entry even
if no comma is found.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-7-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a time slices indication to the perf report header.
For example,
# perf report --stdio --time 10%
# Total Lost Samples: 0
#
# Samples: 9K of event 'cycles:ppp' (time slices: 10%)
# Event count (approx.): 8951288803
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested--by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-6-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Previously, the time percent slice needs an index to specify which one
the user wants.
It may be easier to use if the index can be omitted. So with this
patch, for example,
perf report --stdio --time 10%/1 should be equivalent to
perf report --stdio --time 10%
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-5-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The command line like 'perf report --stdio --time 1abc%/1' could be
accepted by perf. It looks not very good.
This patch uses strtod() to replace original atof() and check the entire
string. Now for the same command line, it would return error message
"Invalid time string".
root@skl:/tmp# perf report --stdio --time 1abc%/1
Invalid time string
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The following message will be returned to user when executing 'perf
script --time' if perf data file doesn't contain the first/last sample
time.
"HINT: no first/last sample time found in perf data.
Please use latest perf binary to execute 'perf record'
(if '--buildid-all' is enabled, needs to set '--timestamp-boundary')."
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
