summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-09-01sky2: don't do GRO on second portstephen hemminger
There's something very important I forgot to tell you. What? Don't cross the GRO streams. Why? It would be bad. I'm fuzzy on the whole good/bad thing. What do you mean, "bad"? Try to imagine all the Internet as you know it stopping instantaneously and every bit in every packet swapping at the speed of light. Total packet reordering. Right. That's bad. Okay. All right. Important safety tip. Thanks, Hubert The simplest way to stop this is just avoid doing GRO on the second port. Very few Marvell boards support two ports per ring, and GRO is just an optimization. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01ipv4: minor fix about RPF in help of KconfigNicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01xfrm_user: avoid a warning with some compilerNicolas Dichtel
Attached is a small patch to remove a warning ("warning: ISO C90 forbids mixed declarations and code" with gcc 4.3.2). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01net/sched/sch_hfsc.c: initialize parent's cl_cfmin properly in init_vf()Michal Soltys
This patch fixes init_vf() function, so on each new backlog period parent's cl_cfmin is properly updated (including further propgation towards the root), even if the activated leaf has no upperlimit curve defined. Signed-off-by: Michal Soltys <soltys@ziu.info> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01pxa168_eth: fix a mdiobus leakDenis Kirjanov
mdiobus resources must be released on exit Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Acked-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01net sched: fix kernel leak in act_policeJeff Mahoney
While reviewing commit 1c40be12f7d8ca1d387510d39787b12e512a7ce8, I audited other users of tc_action_ops->dump for information leaks. That commit covered almost all of them but act_police still had a leak. opt.limit and opt.capab aren't zeroed out before the structure is passed out. This patch uses the C99 initializers to zero everything unused out. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01vhost: stop worker only if createdEric Dumazet
Its currently illegal to call kthread_stop(NULL) Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01MAINTAINERS: Add ehea driver as SupportedBreno Leitao
This change just add the IBM eHEA 10Gb network drivers as supported. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-09-01alpha: Fix printk format errorsMichael Cree
When compiling alpha generic build get errors such as: arch/alpha/kernel/err_marvel.c: In function ‘marvel_print_err_cyc’: arch/alpha/kernel/err_marvel.c:119: error: format ‘%ld’ expects type ‘long int’, but argument 6 has type ‘u64’ Replaced a number of %ld format specifiers with %lld since u64 is unsigned long long. Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-08-31alpha: convert perf_event to use local_tMichael Cree
Updates the Alpha perf_event code to match the changes recently made to the core perf_event code in commit e78505958cf123048fb48cb56b79cebb8edd15fb. Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-08-31Fix call to replaced SuperIO functionsMorten H. Larsen
This patch fixes the failure to compile Alpha Generic because of previously overlooked calls to ns87312_enable_ide(). The function has been replaced by newer SuperIO code. Tested-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Morten H. Larsen <m-larsen@post6.tele.dk> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-08-31alpha: remove homegrown L1_CACHE_ALIGN macroFUJITA Tomonori
Let's use the standard L1_CACHE_ALIGN macro instead. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Matt Turner <mattst88@gmail.com>
2010-08-31PCI: bus speed strings should be constStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-31powerpc/85xx: Add P1021 PCI IDs and quirksAnton Vorontsov
This is needed for proper PCI-E support on P1021 SoCs. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-31arch/powerpc/sysdev/qe_lib/qe.c: Add of_node_put to avoid memory leakJulia Lawall
Add a call to of_node_put in the error handling code following a call to of_find_compatible_node. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E,E1; statement S; @@ *x = (of_find_node_by_path |of_find_node_by_name |of_find_node_by_phandle |of_get_parent |of_get_next_parent |of_get_next_child |of_find_compatible_node |of_match_node )(...); ... if (x == NULL) S <... when != x = E *if (...) { ... when != of_node_put(x) when != if (...) { ... of_node_put(x); ... } ( return <+...x...+>; | * return ...; ) } ...> of_node_put(x); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-31arch/powerpc/platforms/83xx/mpc837x_mds.c: Add missing iounmapJulia Lawall
The function of_iomap returns the result of calling ioremap, so iounmap should be called on the result in the error handling code, as done in the normal exit of the function. The sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ local idexpression x; expression E,E1; identifier l; statement S; @@ *x = of_iomap(...); ... when != iounmap(x) when != if (...) { ... iounmap(x); ... } when != E = x when any ( if (x == NULL) S | if (...) { ... when != iounmap(x) when != if (...) { ... iounmap(x); ... } ( return <+...x...+>; | * return ...; ) } ) ... when != x = E1 when any iounmap(x); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-31fsl_rio: fix compile errorsLi Yang
Fixes the following compile problem on E500 platforms: arch/powerpc/sysdev/fsl_rio.c: In function 'fsl_rio_mcheck_exception': arch/powerpc/sysdev/fsl_rio.c:248: error: 'MCSR_MASK' undeclared (first use in this function) Also fixes the compile problem on non-E500 platforms. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-31ath9k_hw: fix parsing of HT40 5 GHz CTLsLuis R. Rodriguez
The 5 GHz CTL indexes were not being read for all hardware devices due to the masking out through the CTL_MODE_M mask being one bit too short. Without this the calibrated regulatory maximum values were not being picked up when devices operate on 5 GHz in HT40 mode. The final output power used for Atheros devices is the minimum between the calibrated CTL values and what CRDA provides. Cc: stable@kernel.org [2.6.27+] Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-31ath9k_hw: Fix EEPROM uncompress block reading on AR9003Luis R. Rodriguez
The EEPROM is compressed on AR9003, upon decompression the wrong upper limit was being used for the block which prevented the 5 GHz CTL indexes from being used, which are stored towards the end of the EEPROM block. This fix allows the actual intended regulatory limits to be used on AR9003 hardware. Cc: stable@kernel.org [2.6.36+] Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-31wireless: register wiphy rfkill w/o holding cfg80211_mutexJohn W. Linville
Otherwise lockdep complains... https://bugzilla.kernel.org/show_bug.cgi?id=17311 [ INFO: possible circular locking dependency detected ] 2.6.36-rc2-git4 #12 ------------------------------------------------------- kworker/0:3/3630 is trying to acquire lock: (rtnl_mutex){+.+.+.}, at: [<ffffffff813396c7>] rtnl_lock+0x12/0x14 but task is already holding lock: (rfkill_global_mutex){+.+.+.}, at: [<ffffffffa014b129>] rfkill_switch_all+0x24/0x49 [rfkill] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (rfkill_global_mutex){+.+.+.}: [<ffffffff81079ad7>] lock_acquire+0x120/0x15b [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39 [<ffffffffa014b4ab>] rfkill_register+0x2b/0x29c [rfkill] [<ffffffffa0185ba0>] wiphy_register+0x1ae/0x270 [cfg80211] [<ffffffffa0206f01>] ieee80211_register_hw+0x1b4/0x3cf [mac80211] [<ffffffffa0292e98>] iwl_ucode_callback+0x9e9/0xae3 [iwlagn] [<ffffffff812d3e9d>] request_firmware_work_func+0x54/0x6f [<ffffffff81065d15>] kthread+0x8c/0x94 [<ffffffff8100ac24>] kernel_thread_helper+0x4/0x10 -> #1 (cfg80211_mutex){+.+.+.}: [<ffffffff81079ad7>] lock_acquire+0x120/0x15b [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39 [<ffffffffa018605e>] cfg80211_get_dev_from_ifindex+0x1b/0x7c [cfg80211] [<ffffffffa0189f36>] cfg80211_wext_giwscan+0x58/0x990 [cfg80211] [<ffffffff8139a3ce>] ioctl_standard_iw_point+0x1a8/0x272 [<ffffffff8139a529>] ioctl_standard_call+0x91/0xa7 [<ffffffff8139a687>] T.723+0xbd/0x12c [<ffffffff8139a727>] wext_handle_ioctl+0x31/0x6d [<ffffffff8133014e>] dev_ioctl+0x63d/0x67a [<ffffffff8131afd9>] sock_ioctl+0x48/0x21d [<ffffffff81102abd>] do_vfs_ioctl+0x4ba/0x509 [<ffffffff81102b5d>] sys_ioctl+0x51/0x74 [<ffffffff81009e02>] system_call_fastpath+0x16/0x1b -> #0 (rtnl_mutex){+.+.+.}: [<ffffffff810796b0>] __lock_acquire+0xa93/0xd9a [<ffffffff81079ad7>] lock_acquire+0x120/0x15b [<ffffffff813ae869>] __mutex_lock_common+0x54/0x52e [<ffffffff813aede9>] mutex_lock_nested+0x34/0x39 [<ffffffff813396c7>] rtnl_lock+0x12/0x14 [<ffffffffa0185cb5>] cfg80211_rfkill_set_block+0x1a/0x7b [cfg80211] [<ffffffffa014aed0>] rfkill_set_block+0x80/0xd5 [rfkill] [<ffffffffa014b07e>] __rfkill_switch_all+0x3f/0x6f [rfkill] [<ffffffffa014b13d>] rfkill_switch_all+0x38/0x49 [rfkill] [<ffffffffa014b821>] rfkill_op_handler+0x105/0x136 [rfkill] [<ffffffff81060708>] process_one_work+0x248/0x403 [<ffffffff81062620>] worker_thread+0x139/0x214 [<ffffffff81065d15>] kthread+0x8c/0x94 [<ffffffff8100ac24>] kernel_thread_helper+0x4/0x10 Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Johannes Berg <johannes@sipsolutions.net>
2010-08-31netlink: Make NETLINK_USERSOCK work again.David S. Miller
Once we started enforcing the a nl_table[] entry exist for a protocol, NETLINK_USERSOCK stopped working. Add a dummy table entry so that it works again. Reported-by: Thomas Voegtle <tv@lio96.de> Tested-by: Thomas Voegtle <tv@lio96.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-31powerpc/85xx: Fix compile issue with p1022_ds due to lmb rename to memblockKumar Gala
arch/powerpc/platforms/85xx/p1022_ds.c:22:23: error: linux/lmb.h: No such file or directory arch/powerpc/platforms/85xx/p1022_ds.c: In function 'p1022_ds_setup_arch': arch/powerpc/platforms/85xx/p1022_ds.c:100: error: implicit declaration of function 'memblock_end_of_DRAM' arch/powerpc/platforms/85xx/p1022_ds.c: At top level: arch/powerpc/platforms/85xx/p1022_ds.c:147: error: 'udbg_progress' undeclared here (not in a function) make[2]: *** [arch/powerpc/platforms/85xx/p1022_ds.o] Error 1 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-31powerpc/85xx: Fix compilation of mpc85xx_mds.cAlexander Graf
Commit 99d8238f berobbed the for_each loop of its iterator! Let's be nice and give it back, so it compiles for us. CC: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-08-31workqueue: use zalloc_cpumask_var() for gcwq->mayday_maskTejun Heo
alloc_mayday_mask() was using alloc_cpumask_var() making gcwq->mayday_mask contain garbage after initialization on CONFIG_CPUMASK_OFFSTACK=y configurations. This combined with the previously fixed GCWQ_DISASSOCIATED initialization bug could make rescuers fall into infinite loop trying to bind to an offline cpu. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: CAI Qian <caiqian@redhat.com>
2010-08-31workqueue: fix GCWQ_DISASSOCIATED initializationTejun Heo
init_workqueues() incorrectly marks workqueues for all possible CPUs associated. Combined with mayday_mask initialization bug, this can make rescuers keep trying to bind to an offline gcwq indefinitely. Fix init_workqueues() such that only online CPUs have their gcwqs have GCWQ_DISASSOCIATED cleared. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: CAI Qian <caiqian@redhat.com>
2010-08-30irda: Correctly clean up self->ias_obj on irda_bind() failure.David S. Miller
If irda_open_tsap() fails, the irda_bind() code tries to destroy the ->ias_obj object by hand, but does so wrongly. In particular, it fails to a) release the hashbin attached to the object and b) reset the self->ias_obj pointer to NULL. Fix both problems by using irias_delete_object() and explicitly setting self->ias_obj to NULL, just as irda_release() does. Reported-by: Tavis Ormandy <taviso@cmpxchg8b.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-31powerpc: Don't use kernel stack with translation offMichael Neuling
In f761622e59433130bc33ad086ce219feee9eb961 we changed early_setup_secondary so it's called using the proper kernel stack rather than the emergency one. Unfortunately, this stack pointer can't be used when translation is off on PHYP as this stack pointer might be outside the RMO. This results in the following on all non zero cpus: cpu 0x1: Vector: 300 (Data Access) at [c00000001639fd10] pc: 000000000001c50c lr: 000000000000821c sp: c00000001639ff90 msr: 8000000000001000 dar: c00000001639ffa0 dsisr: 42000000 current = 0xc000000016393540 paca = 0xc000000006e00200 pid = 0, comm = swapper The original patch was only tested on bare metal system, so it never caught this problem. This changes __secondary_start so that we calculate the new stack pointer but only start using it after we've called early_setup_secondary. With this patch, the above problem goes away. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-31powerpc/perf_event: Reduce latency of calling perf_event_do_pendingPaul Mackerras
Commit 0fe1ac48 ("powerpc/perf_event: Fix oops due to perf_event_do_pending call") moved the call to perf_event_do_pending in timer_interrupt() down so that it was after the irq_enter() call. Unfortunately this moved it after the code that checks whether it is time for the next decrementer clock event. The result is that the call to perf_event_do_pending() won't happen until the next decrementer clock event is due. This was pointed out by Milton Miller. This fixes it by moving the check for whether it's time for the next decrementer clock event down to the point where we're about to call the event handler, after we've called perf_event_do_pending. This has the side effect that on old pre-Core99 Powermacs where we use the ppc_n_lost_interrupts mechanism to replay interrupts, a replayed interrupt will incur a little more latency since it will now do the code from the irq_enter down to the irq_exit, that it used to skip. However, these machines are now old and rare enough that this doesn't matter. To make it clear that ppc_n_lost_interrupts is only used on Powermacs, and to speed up the code slightly on non-Powermac ppc32 machines, the code that tests ppc_n_lost_interrupts is now conditional on CONFIG_PMAC as well as CONFIG_PPC32. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: stable@kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-31powerpc/kexec: Adds correct calling convention for kexec purgatoryMatthew McClintock
Call kexec purgatory code correctly. We were getting lucky before. If you examine the powerpc 32bit kexec "purgatory" code you will see it expects the following: >From kexec-tools: purgatory/arch/ppc/v2wrap_32.S -> calling convention: -> r3 = physical number of this cpu (all cpus) -> r4 = address of this chunk (master only) As such, we need to set r3 to the current core, r4 happens to be unused by purgatory at the moment but we go ahead and set it here as well Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-08-30wireless extensions: fix kernel heap content leakJohannes Berg
Wireless extensions have an unfortunate, undocumented requirement which requires drivers to always fill iwp->length when returning a successful status. When a driver doesn't do this, it leads to a kernel heap content leak when userspace offers a larger buffer than would have been necessary. Arguably, this is a driver bug, as it should, if it returns 0, fill iwp->length, even if it separately indicated that the buffer contents was not valid. However, we can also at least avoid the memory content leak if the driver doesn't do this by setting the iwp length to max_tokens, which then reflects how big the buffer is that the driver may fill, regardless of how big the userspace buffer is. To illustrate the point, this patch also fixes a corresponding cfg80211 bug (since this requirement isn't documented nor was ever pointed out by anyone during code review, I don't trust all drivers nor all cfg80211 handlers to implement it correctly). Cc: stable@kernel.org [all the way back] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-30MAINTAINERS: change broken url for prism54John W. Linville
Reported-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-30mac80211: delete work timerJohannes Berg
The new workqueue changes helped me find this bug that's been lingering since the changes to the work processing in mac80211 -- the work timer is never deleted properly. Do that to avoid having it fire after all data structures have been freed. It can't be re-armed because all it will do, if running, is schedule the work, but that gets flushed later and won't have anything to do since all work items are gone by now (by way of interface removal). Cc: stable@kernel.org [2.6.34+] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-30p54: fix tx feedback status flag checkChristian Lamparter
Michael reported that p54* never really entered power save mode, even tough it was enabled. It turned out that upon a power save mode change the firmware will set a special flag onto the last outgoing frame tx status (which in this case is almost always the designated PSM nullfunc frame). This flag confused the driver; It erroneously reported transmission failures to the stack, which then generated the next nullfunc. and so on... Cc: <stable@kernel.org> Reported-by: Michael Buesch <mb@bu3sch.de> Tested-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-30ath5k: check return value of ieee80211_get_tx_rateJohn W. Linville
This avoids a NULL pointer dereference as reported here: https://bugzilla.redhat.com/show_bug.cgi?id=625889 When the WARN condition is hit in ieee80211_get_tx_rate, it will return NULL. So, we need to check the return value and avoid dereferencing it in that case. Signed-off-by: John W. Linville <linville@tuxdriver.com> Cc: stable@kernel.org Acked-by: Bob Copeland <me@bobcopeland.com>
2010-08-309p: potential ERR_PTR() dereferenceDan Carpenter
p9_client_walk() can return error values if we run out of space or there is a problem with the network. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2010-08-30UBI: do not oops when erroneous PEB is scheduled for scrubbingArtem Bityutskiy
When an erroneous PEB is scheduling for scrubbing, we end up with the following oops: [<c0162404>] (prot_queue_del+0x0/0x50) from [<c01635b4>] (ubi_wl_scrub_peb+0xec/0x13c) [<c01634c8>] (ubi_wl_scrub_peb+0x0/0x13c) from [<c01603bc>] (ubi_eba_read_leb+0x200/0x428) [<c01601bc>] (ubi_eba_read_leb+0x0/0x428) from [<c015e3c0>] (ubi_leb_read+0xe8/0x138) [<c015e2d8>] (ubi_leb_read+0x0/0x138) from [<c00d6918>] (ubifs_start_scan+0x7c/0xf4) [<c00d689c>] (ubifs_start_scan+0x0/0xf4) from [<c00e3650>] (ubifs_recover_leb+0x3c/0x730) [<c00e3614>] (ubifs_recover_leb+0x0/0x730) from [<c00e444c>] (ubifs_recover_log_leb+0xc8/0x2dc) [<c00e4384>] (ubifs_recover_log_leb+0x0/0x2dc) from [<c00d7c20>] (ubifs_replay_journal+0xb90/0x13a4) [<c00d7090>] (ubifs_replay_journal+0x0/0x13a4) from [<c00cdd68>] (ubifs_fill_super+0xb84/0x1054) [<c00cd1e4>] (ubifs_fill_super+0x0/0x1054) from [<c00ced04>] (ubifs_get_sb+0xc4/0x2ac) [<c00cec40>] (ubifs_get_sb+0x0/0x2ac) from [<c007f04c>] (vfs_kern_mount+0x58/0x94) [<c007eff4>] (vfs_kern_mount+0x0/0x94) from [<c007f0e8>] (do_kern_mount+0x40/0xe8) [<c007f0a8>] (do_kern_mount+0x0/0xe8) from [<c0095628>] (do_new_mount+0x68/0x8c) [<c00955c0>] (do_new_mount+0x0/0x8c) from [<c00957a8>] (do_mount+0x15c/0x1b8) [<c009564c>] (do_mount+0x0/0x1b8) from [<c0095890>] (sys_mount+0x8c/0xd4) [<c0095804>] (sys_mount+0x0/0xd4) from [<c0023c00>] (ret_fast_syscall+0x0/0x2c) Kernel panic - not syncing: Fatal exception The problem is that 'ubi_wl_scrub_peb()' does not expect that PEBs may be in the erroneous tree, which is a bug. This patch fixes the bug and adds corresponding check to 'ubi_wl_scrub_peb()'. Now it will simply ignore erroneous PEBs, instead of causing an oops. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-30UBI: fix kconfig unmet dependencyRandy Dunlap
warning: (OPTPROBES && KPROBES && HAVE_OPTPROBES && !PREEMPT && DEBUG_KERNEL || MTD_UBI_DEBUG && MTD && SYSFS && MTD_UBI || UBIFS_FS_DEBUG && MISC_FILESYSTEMS && UBIFS_FS || LOCKDEP && DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT || LATENCYTOP && HAVE_LATENCYTOP_SUPPORT && DEBUG_KERNEL && STACKTRACE_SUPPORT && PROC_FS) selects KALLSYMS_ALL which has unmet direct dependencies (DEBUG_KERNEL && KALLSYMS) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-30md: resolve confusion of MD_CHANGE_CLEANNeilBrown
MD_CHANGE_CLEAN is used for two different purposes and this leads to confusion. One of the purposes is largely mirrored by MD_CHANGE_PENDING which is not used for anything else, so have MD_CHANGE_PENDING take over that purpose fully. The two purposes are: 1/ tell md_update_sb that an update is needed and that it is just a clean/dirty transition. 2/ tell user-space that an transition from clean to dirty is pending (something wants to write), and tell te kernel (by clearin the flag) that the transition is OK. The first purpose remains wit MD_CHANGE_CLEAN, the second is moved fully to MD_CHANGE_PENDING. This means that various places which conditionally set or cleared MD_CHANGE_CLEAN no longer need to be conditional. Signed-off-by: NeilBrown <neilb@suse.de>
2010-08-30md: don't clear MD_CHANGE_CLEAN in md_update_sb() for external arraysDan Williams
If this bit is cleared in md_update_sb() the kernel will allow writes to the array if userspace triggers md_allow_write(), e.g. through stripe_cache_size, when mdmon is not active. When mdmon is active the array transitions to active-idle bypassing write-pending, setting up a race for mdmon to set the array clean before a write arrives. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
2010-08-30Move .gitignore from drivers/md to lib/raid6NeilBrown
Another missing bit of the raid6 -> /lib move. Reported-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: NeilBrown <neilb@suse.de>
2010-08-30UBI: fix forward compatibilityArtem Bityutskiy
Commit 0798cea8c2e1afee59686c51d27d0e96b05e42d1 "UBI: improve corrupted flash handling" broke delet-compatible volumes handling - it introduced a limit of 8 eraseblocks which may be corrupted. And delete-compatible eraseblocks are added to the "corrupted" list, so if we'd have a large delete-compatible volume, UBI would refuse it. The fix is to add delete-compatible volumes to the erase list instead. Indeed, they are corrupted, we just have to erase them. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-30UBI: eliminate update of list_for_each_entry loop cursorJulia Lawall
list_for_each_entry uses its first argument to move from one element to the next, so modifying it can break the iteration. The variable re1 is already used within the loop as a temporary variable, and is not live here. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ iterator name list_for_each_entry; expression x,E; position p1,p2; @@ list_for_each_entry@p1(x,...) { <... x =@p2 E ...> } @@ expression x,E; position r.p1,r.p2; statement S; @@ *x =@p2 E ... list_for_each_entry@p1(x,...) S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-30nilfs2: fix leak of shadow dat inode in error path of load_nilfsRyusuke Konishi
If load_nilfs() gets an error while doing recovery, it will fail to free the shadow inode of dat (nilfs->ns_gc_dat). This fixes the leak issue. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-08-30drm/radeon/kms: fix a regression on r7xx AGP due to the HDP flush fixAlex Deucher
commit: 812d046915f48236657f02c06d7dc47140e9ceda drm/radeon/kms/r7xx: add workaround for hw issue with HDP flush breaks on AGP boards since there is no VRAM gart table. This patch fixes the issue by creating a VRAM scratch page so that can be used on both AGP and PCIE. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29834 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-30drm/radeon/kms: use tracked values for sclk and mclkAlex Deucher
Rather than calling get_memory_clock and get_engine_clock, used the tracked values from the pm code. Calling the tables adds additional latency in the modesetting and pm paths. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-29Linux 2.6.36-rc3v2.6.36-rc3Linus Torvalds
2010-08-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: work around VIA and NEC PHY packet reception bug firewire: core: do not use del_timer_sync() in interrupt context firewire: net: fix unicast reception RCODE in failure paths firewire: sbp2: fix stall with "Unsolicited response" firewire: sbp2: fix memory leak in sbp2_cancel_orbs or at send error ieee1394: Adjust confusing if indentation
2010-08-29firewire: ohci: work around VIA and NEC PHY packet reception bugStefan Richter
VIA VT6306, VIA VT6308, and NEC OrangeLink controllers do not write packet event codes for received PHY packets (or perhaps write evt_no_status, hard to tell). Work around it by overwriting the packet's ACK by ack_complete, so that upper layers that listen to PHY packet reception get to see these packets. (Also tested: TI TSB82AA2, TI TSB43AB22/A, TI XIO2213A, Agere FW643, JMicron JMB381 --- these do not exhibit this bug.) Clemens proposed a quirks flag for that, IOW whitelist known misbehaving controllers for this workaround. Though to me it seems harmless enough to enable for all controllers. The log_ar_at_event() debug log will continue to show the original status from the DMA unit. Reported-by: Clemens Ladisch <clemens@ladisch.de> (VT6308) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-08-28pcnet_cs: add new_idKen Kawasaki
pcnet_cs: add new_id: "KENTRONICS KEP-230" 10Base-T PCMCIA card. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-22 02:59:23 +0000